WorldWideScience

Sample records for risk analysis methods

  1. STOCHASTIC METHODS IN RISK ANALYSIS

    Directory of Open Access Journals (Sweden)

    Vladimíra OSADSKÁ

    2017-06-01

    Full Text Available In this paper, we review basic stochastic methods which can be used to extend state-of-the-art deterministic analytical methods for risk analysis. We can conclude that the standard deterministic analytical methods highly depend on the practical experience and knowledge of the evaluator and therefore, the stochastic methods should be introduced. The new risk analysis methods should consider the uncertainties in input values. We present how large is the impact on the results of the analysis solving practical example of FMECA with uncertainties modelled using Monte Carlo sampling.

  2. Methods for Risk Analysis

    International Nuclear Information System (INIS)

    Alverbro, Karin

    2010-01-01

    Many decision-making situations today affect humans and the environment. In practice, many such decisions are made without an overall view and prioritise one or other of the two areas. Now and then these two areas of regulation come into conflict, e.g. the best alternative as regards environmental considerations is not always the best from a human safety perspective and vice versa. This report was prepared within a major project with the aim of developing a framework in which both the environmental aspects and the human safety aspects are integrated, and decisions can be made taking both fields into consideration. The safety risks have to be analysed in order to be successfully avoided and one way of doing this is to use different kinds of risk analysis methods. There is an abundance of existing methods to choose from and new methods are constantly being developed. This report describes some of the risk analysis methods currently available for analysing safety and examines the relationships between them. The focus here is mainly on human safety aspects

  3. Method for environmental risk analysis (MIRA) revision 2007

    International Nuclear Information System (INIS)

    2007-04-01

    OLF's instruction manual for carrying out environmental risk analyses provides a united approach and a common framework for environmental risk assessments. This is based on the best information available. The manual implies standardizations of a series of parameters, input data and partial analyses that are included in the environmental risk analysis. Environmental risk analyses carried out according to the MIRA method will thus be comparable between fields and between companies. In this revision an update of the text in accordance with today's practice for environmental risk analyses and prevailing regulations is emphasized. Moreover, method adjustments for especially protected beach habitats have been introduced, as well as a general method for estimating environmental risk concerning fish. Emphasis has also been put on improving environmental risk analysis' possibilities to contribute to a better management of environmental risk in the companies (ml)

  4. Reliability and risk analysis methods research plan

    International Nuclear Information System (INIS)

    1984-10-01

    This document presents a plan for reliability and risk analysis methods research to be performed mainly by the Reactor Risk Branch (RRB), Division of Risk Analysis and Operations (DRAO), Office of Nuclear Regulatory Research. It includes those activities of other DRAO branches which are very closely related to those of the RRB. Related or interfacing programs of other divisions, offices and organizations are merely indicated. The primary use of this document is envisioned as an NRC working document, covering about a 3-year period, to foster better coordination in reliability and risk analysis methods development between the offices of Nuclear Regulatory Research and Nuclear Reactor Regulation. It will also serve as an information source for contractors and others to more clearly understand the objectives, needs, programmatic activities and interfaces together with the overall logical structure of the program

  5. Analysis of risk assessment methods for goods trucking

    Directory of Open Access Journals (Sweden)

    Yunyazova A.O.

    2018-04-01

    Full Text Available the article considers models of risk assessment that can be applied to cargo transportation, for forecasting possible damage in the form of financial and material costs in order to reduce the percentage of probability of their occurrence. The analysis of risk by the method «Criterion. Event. Rule" is represented. This method is based on the collection of information by various methods, assigning an assessment to the identified risks, ranking and formulating a report on the analysis. It can be carried out as a fully manual mechanical method of information collecting and performing calculations or can be brought to an automated level from data collection to the delivery of finished results (but in this case some nuances that could significantly influence the outcome of the analysis can be ignored. The expert method is of particular importance, since it relies directly on human experience. In this case, a special role is played by the human factor. The collection of information and the assigned assessments to risk groups depend on the extent to which experts agree on this issue. The smaller the fluctuations in the values ​​of the estimates of the experts, the more accurate and optimal the results will be.

  6. Quantitative Risk Analysis: Method And Process

    Directory of Open Access Journals (Sweden)

    Anass BAYAGA

    2010-03-01

    Full Text Available Recent and past studies (King III report, 2009: 73-75; Stoney 2007;Committee of Sponsoring Organisation-COSO, 2004, Bartell, 2003; Liebenberg and Hoyt, 2003; Reason, 2000; Markowitz 1957 lament that although, the introduction of quantifying risk to enhance degree of objectivity in finance for instance was quite parallel to its development in the manufacturing industry, it is not the same in Higher Education Institution (HEI. In this regard, the objective of the paper was to demonstrate the methods and process of Quantitative Risk Analysis (QRA through likelihood of occurrence of risk (phase I. This paper serves as first of a two-phased study, which sampled hundred (100 risk analysts in a University in the greater Eastern Cape Province of South Africa.The analysis of likelihood of occurrence of risk by logistic regression and percentages were conducted to investigate whether there were a significant difference or not between groups (analyst in respect of QRA.The Hosmer and Lemeshow test was non-significant with a chi-square(X2 =8.181; p = 0.300, which indicated that there was a good model fit, since the data did not significantly deviate from the model. The study concluded that to derive an overall likelihood rating that indicated the probability that a potential risk may be exercised within the construct of an associated threat environment, the following governing factors must be considered: (1 threat source motivation and capability (2 nature of the vulnerability (3 existence and effectiveness of current controls (methods and process.

  7. Synthesis of Enterprise and Value-Based Methods for Multiattribute Risk Analysis

    International Nuclear Information System (INIS)

    Kenley, C. Robert; Collins, John W.; Beck, John M.; Heydt, Harold J.; Garcia, Chad B.

    2001-01-01

    This paper describes a method for performing multiattribute decision analysis to prioritize ap-proaches to handling risks during the development and operation of complex socio-technical systems. The method combines risk categorization based on enterprise views, risk prioritization of the categories based on the Analytic Hierarchy Process (AHP), and more standard probability-consequence ratings schemes. We also apply value-based testing me-thods used in software development to prioritize risk-handling approaches. We describe a tool that synthesizes the methods and performs a multiattribute analysis of the technical and pro-grammatic risks on the Next Generation Nuclear Plant (NGNP) enterprise.

  8. The development of a 3D risk analysis method.

    Science.gov (United States)

    I, Yet-Pole; Cheng, Te-Lung

    2008-05-01

    Much attention has been paid to the quantitative risk analysis (QRA) research in recent years due to more and more severe disasters that have happened in the process industries. Owing to its calculation complexity, very few software, such as SAFETI, can really make the risk presentation meet the practice requirements. However, the traditional risk presentation method, like the individual risk contour in SAFETI, is mainly based on the consequence analysis results of dispersion modeling, which usually assumes that the vapor cloud disperses over a constant ground roughness on a flat terrain with no obstructions and concentration fluctuations, which is quite different from the real situations of a chemical process plant. All these models usually over-predict the hazardous regions in order to maintain their conservativeness, which also increases the uncertainty of the simulation results. On the other hand, a more rigorous model such as the computational fluid dynamics (CFD) model can resolve the previous limitations; however, it cannot resolve the complexity of risk calculations. In this research, a conceptual three-dimensional (3D) risk calculation method was proposed via the combination of results of a series of CFD simulations with some post-processing procedures to obtain the 3D individual risk iso-surfaces. It is believed that such technique will not only be limited to risk analysis at ground level, but also be extended into aerial, submarine, or space risk analyses in the near future.

  9. A Method of Fire Scenarios Identification in a Consolidated Fire Risk Analysis

    International Nuclear Information System (INIS)

    Lim, Ho Gon; Han, Sang Hoon; Yang, Joon Eon

    2010-01-01

    Conventional fire PSA consider only two cases of fire scenarios, that is one for fire without propagation and the other for single propagation to neighboring compartment. Recently, a consolidated fire risk analysis using single fault tree (FT) was developed. However, the fire scenario identification in the new method is similar to conventional fire analysis method. The present study develops a new method of fire scenario identification in a consolidated fire risk analysis method. An equation for fire propagation is developed to identify fire scenario and a mapping method of fire scenarios into internal event risk model is discussed. Finally, an algorithm for automatic program is suggested

  10. Handbook of methods for risk-based analysis of technical specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1994-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  11. Handbook of methods for risk-based analysis of Technical Specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1993-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  12. Hierarchic Analysis Method to Evaluate Rock Burst Risk

    Directory of Open Access Journals (Sweden)

    Ming Ji

    2015-01-01

    Full Text Available In order to reasonably evaluate the risk of rock bursts in mines, the factors impacting rock bursts and the existing grading criterion on the risk of rock bursts were studied. By building a model of hierarchic analysis method, the natural factors, technology factors, and management factors that influence rock bursts were analyzed and researched, which determined the degree of each factor’s influence (i.e., weight and comprehensive index. Then the grade of rock burst risk was assessed. The results showed that the assessment level generated by the model accurately reflected the actual risk degree of rock bursts in mines. The model improved the maneuverability and practicability of existing evaluation criteria and also enhanced the accuracy and science of rock burst risk assessment.

  13. Probabilistic methods in fire-risk analysis

    International Nuclear Information System (INIS)

    Brandyberry, M.D.

    1989-01-01

    The first part of this work outlines a method for assessing the frequency of ignition of a consumer product in a building and shows how the method would be used in an example scenario utilizing upholstered furniture as the product and radiant auxiliary heating devices (electric heaters, wood stoves) as the ignition source. Deterministic thermal models of the heat-transport processes are coupled with parameter uncertainty analysis of the models and with a probabilistic analysis of the events involved in a typical scenario. This leads to a distribution for the frequency of ignition for the product. In second part, fire-risk analysis as currently used in nuclear plants is outlines along with a discussion of the relevant uncertainties. The use of the computer code COMPBRN is discussed for use in the fire-growth analysis along with the use of response-surface methodology to quantify uncertainties in the code's use. Generalized response surfaces are developed for temperature versus time for a cable tray, as well as a surface for the hot gas layer temperature and depth for a room of arbitrary geometry within a typical nuclear power plant compartment. These surfaces are then used to simulate the cable tray damage time in a compartment fire experiment

  14. Risk Analysis Method Based on FMEA for Transmission Line in Lightning Hazards

    Directory of Open Access Journals (Sweden)

    You-Yuan WANG

    2014-05-01

    Full Text Available Failure rate of transmission line and reliability of power system are significantly affected by Lightning meteorological factor. In view of the complexity and variability of Lightning meteorological factors, this paper presents lightning trip-out rate model of transmission line in considering distribution of ground flash density and lightning day hours. Meanwhile, presents a failure rate model of transmission line in different condition, and a risk analysis method for transmission line considering multiple risk factors based on risk quantification. This method takes Lightning meteorological factor as the main evaluation standard, and establishes risk degree evaluation system for transmission line including another five evaluation standard. Put forward the risk indicators by quantify the risk factors based on experience date of transmission line in service. Based on the risk indexes comprehensive evaluation is conducted, and the evaluation result closer to practice is achieved, providing basis for transmission line risk warning and maintenance strategy. Through the risk analysis for 220 kV transmission line in a certain power supply bureau, the effectiveness of the proposed method is validated.

  15. On the use of the hybrid causal logic method in offshore risk analysis

    International Nuclear Information System (INIS)

    Roed, Willy; Mosleh, Ali; Vinnem, Jan Erik; Aven, Terje

    2009-01-01

    In the Norwegian offshore oil and gas industry risk analyses have been used to provide decision support for more than 20 years. The focus has traditionally been on the planning phase, but during the last years a need for better risk analysis methods for the operational phase has been identified. Such methods should take human and organizational factors into consideration in a more explicit way than the traditional risk analysis methods do. Recently, a framework, called hybrid causal logic (HCL), has been developed based on traditional risk analysis tools combined with Bayesian belief networks (BBNs), using the aviation industry as a case. This paper reviews this framework and discusses its applicability for the offshore industry, and the relationship to existing research projects, such as the barrier and operational risk analysis project (BORA). The paper also addresses specific features of the framework and suggests a new approach for the probability assignment process. This approach simplifies the assignment process considerably without loosing the flexibility that is needed to properly reflect the phenomena being studied

  16. Overview of methods for uncertainty analysis and sensitivity analysis in probabilistic risk assessment

    International Nuclear Information System (INIS)

    Iman, R.L.; Helton, J.C.

    1985-01-01

    Probabilistic Risk Assessment (PRA) is playing an increasingly important role in the nuclear reactor regulatory process. The assessment of uncertainties associated with PRA results is widely recognized as an important part of the analysis process. One of the major criticisms of the Reactor Safety Study was that its representation of uncertainty was inadequate. The desire for the capability to treat uncertainties with the MELCOR risk code being developed at Sandia National Laboratories is indicative of the current interest in this topic. However, as yet, uncertainty analysis and sensitivity analysis in the context of PRA is a relatively immature field. In this paper, available methods for uncertainty analysis and sensitivity analysis in a PRA are reviewed. This review first treats methods for use with individual components of a PRA and then considers how these methods could be combined in the performance of a complete PRA. In the context of this paper, the goal of uncertainty analysis is to measure the imprecision in PRA outcomes of interest, and the goal of sensitivity analysis is to identify the major contributors to this imprecision. There are a number of areas that must be considered in uncertainty analysis and sensitivity analysis for a PRA: (1) information, (2) systems analysis, (3) thermal-hydraulic phenomena/fission product behavior, (4) health and economic consequences, and (5) display of results. Each of these areas and the synthesis of them into a complete PRA are discussed

  17. Applying Multi-Criteria Analysis Methods for Fire Risk Assessment

    Directory of Open Access Journals (Sweden)

    Pushkina Julia

    2015-11-01

    Full Text Available The aim of this paper is to prove the application of multi-criteria analysis methods for optimisation of fire risk identification and assessment process. The object of this research is fire risk and risk assessment. The subject of the research is studying the application of analytic hierarchy process for modelling and influence assessment of various fire risk factors. Results of research conducted by the authors can be used by insurance companies to perform the detailed assessment of fire risks on the object and to calculate a risk extra charge to an insurance premium; by the state supervisory institutions to determine the compliance of a condition of object with requirements of regulations; by real state owners and investors to carry out actions for decrease in degree of fire risks and minimisation of possible losses.

  18. ANALYSIS METHODS OF BANKRUPTCY RISK IN ROMANIAN ENERGY MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    CORICI MARIAN CATALIN

    2016-12-01

    Full Text Available The study is an analysis of bankruptcy risk and assessing the economic performance of the entity in charge of energy mining industry from southwest region. The scientific activity assesses the risk of bankruptcy using score’s method and some indicators witch reflecting the results obtained and elements from organization balance sheet involved in mining and energy which contributes to the stability of the national energy system. Analysis undertaken is focused on the application of the business organization models that allow a comprehensive assessment of the risk of bankruptcy and be an instrument of its forecast. In this study will be highlighted developments bankruptcy risk within the organization through the Altman model and Conan-Holder model in order to show a versatile image on the organization's ability to ensure business continuity

  19. Risk Assessment Method for Offshore Structure Based on Global Sensitivity Analysis

    Directory of Open Access Journals (Sweden)

    Zou Tao

    2012-01-01

    Full Text Available Based on global sensitivity analysis (GSA, this paper proposes a new risk assessment method for an offshore structure design. This method quantifies all the significances among random variables and their parameters at first. And by comparing the degree of importance, all minor factors would be negligible. Then, the global uncertainty analysis work would be simplified. Global uncertainty analysis (GUA is an effective way to study the complexity and randomness of natural events. Since field measured data and statistical results often have inevitable errors and uncertainties which lead to inaccurate prediction and analysis, the risk in the design stage of offshore structures caused by uncertainties in environmental loads, sea level, and marine corrosion must be taken into account. In this paper, the multivariate compound extreme value distribution model (MCEVD is applied to predict the extreme sea state of wave, current, and wind. The maximum structural stress and deformation of a Jacket platform are analyzed and compared with different design standards. The calculation result sufficiently demonstrates the new risk assessment method’s rationality and security.

  20. A comparative critical study between FMEA and FTA risk analysis methods

    Science.gov (United States)

    Cristea, G.; Constantinescu, DM

    2017-10-01

    Today there is used an overwhelming number of different risk analyses techniques with acronyms such as: FMEA (Failure Modes and Effects Analysis) and its extension FMECA (Failure Mode, Effects, and Criticality Analysis), DRBFM (Design Review by Failure Mode), FTA (Fault Tree Analysis) and and its extension ETA (Event Tree Analysis), HAZOP (Hazard & Operability Studies), HACCP (Hazard Analysis and Critical Control Points) and What-if/Checklist. However, the most used analysis techniques in the mechanical and electrical industry are FMEA and FTA. In FMEA, which is an inductive method, information about the consequences and effects of the failures is usually collected through interviews with experienced people, and with different knowledge i.e., cross-functional groups. The FMEA is used to capture potential failures/risks & impacts and prioritize them on a numeric scale called Risk Priority Number (RPN) which ranges from 1 to 1000. FTA is a deductive method i.e., a general system state is decomposed into chains of more basic events of components. The logical interrelationship of how such basic events depend on and affect each other is often described analytically in a reliability structure which can be visualized as a tree. Both methods are very time-consuming to be applied thoroughly, and this is why it is oftenly not done so. As a consequence possible failure modes may not be identified. To address these shortcomings, it is proposed to use a combination of FTA and FMEA.

  1. The Monte Carlo Simulation Method for System Reliability and Risk Analysis

    CERN Document Server

    Zio, Enrico

    2013-01-01

    Monte Carlo simulation is one of the best tools for performing realistic analysis of complex systems as it allows most of the limiting assumptions on system behavior to be relaxed. The Monte Carlo Simulation Method for System Reliability and Risk Analysis comprehensively illustrates the Monte Carlo simulation method and its application to reliability and system engineering. Readers are given a sound understanding of the fundamentals of Monte Carlo sampling and simulation and its application for realistic system modeling.   Whilst many of the topics rely on a high-level understanding of calculus, probability and statistics, simple academic examples will be provided in support to the explanation of the theoretical foundations to facilitate comprehension of the subject matter. Case studies will be introduced to provide the practical value of the most advanced techniques.   This detailed approach makes The Monte Carlo Simulation Method for System Reliability and Risk Analysis a key reference for senior undergra...

  2. Information security risk analysis

    CERN Document Server

    Peltier, Thomas R

    2001-01-01

    Effective Risk AnalysisQualitative Risk AnalysisValue AnalysisOther Qualitative MethodsFacilitated Risk Analysis Process (FRAP)Other Uses of Qualitative Risk AnalysisCase StudyAppendix A: QuestionnaireAppendix B: Facilitated Risk Analysis Process FormsAppendix C: Business Impact Analysis FormsAppendix D: Sample of ReportAppendix E: Threat DefinitionsAppendix F: Other Risk Analysis OpinionsIndex

  3. Application of the Maximum Entropy Method to Risk Analysis of Mergers and Acquisitions

    Science.gov (United States)

    Xie, Jigang; Song, Wenyun

    The maximum entropy (ME) method can be used to analyze the risk of mergers and acquisitions when only pre-acquisition information is available. A practical example of the risk analysis of China listed firms’ mergers and acquisitions is provided to testify the feasibility and practicality of the method.

  4. Comparative analysis of assessment methods for operational and anesthetic risks in ulcerative gastroduodenal bleeding

    Directory of Open Access Journals (Sweden)

    Potakhin S.N.

    2015-09-01

    Full Text Available Aim of the investigation: to conduct a comparative analysis of methods of evaluation of surgical and anesthetic risks in ulcerative gastroduodenal bleeding. Materials and methods. A retrospective analysis ofthe extent of the surgical and anesthetic risks and results of treatment of 71 patients with peptic ulcer bleeding has been conducted in the study. To evaluate the surgical and anesthetic risks classification trees are used, scale ТА. Rockall and prognosis System of rebleeding (SPRK, proposed by N. V. Lebedev et al. in 2009, enabling to evaluate the probability of a fatal outcome. To compare the efficacy ofthe methods the following indicators are used: sensitivity, specificity and prediction of positive result. Results. The study compared the results ofthe risk assessment emergency operation by using these methods with the outcome ofthe operation. The comparison ofthe prognosis results in sensitivity leads to the conclusion that the scales ТА. Rockall and SPRK are worse than the developed method of classification trees in recognizing patients with poor outcome of surgery. Conclusion. The method of classification trees can be considered as the most accurate method of evaluation of surgical and anesthetic risks in ulcerative gastroduodenal bleeding.

  5. Risk prediction, safety analysis and quantitative probability methods - a caveat

    International Nuclear Information System (INIS)

    Critchley, O.H.

    1976-01-01

    Views are expressed on the use of quantitative techniques for the determination of value judgements in nuclear safety assessments, hazard evaluation, and risk prediction. Caution is urged when attempts are made to quantify value judgements in the field of nuclear safety. Criteria are given the meaningful application of reliability methods but doubts are expressed about their application to safety analysis, risk prediction and design guidances for experimental or prototype plant. Doubts are also expressed about some concomitant methods of population dose evaluation. The complexities of new designs of nuclear power plants make the problem of safety assessment more difficult but some possible approaches are suggested as alternatives to the quantitative techniques criticized. (U.K.)

  6. Method for environmental risk analysis (MIRA) revision 2007; Metode for miljoerettet risikoanalyse (MIRA) revisjon 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-04-15

    OLF's instruction manual for carrying out environmental risk analyses provides a united approach and a common framework for environmental risk assessments. This is based on the best information available. The manual implies standardizations of a series of parameters, input data and partial analyses that are included in the environmental risk analysis. Environmental risk analyses carried out according to the MIRA method will thus be comparable between fields and between companies. In this revision an update of the text in accordance with today's practice for environmental risk analyses and prevailing regulations is emphasized. Moreover, method adjustments for especially protected beach habitats have been introduced, as well as a general method for estimating environmental risk concerning fish. Emphasis has also been put on improving environmental risk analysis' possibilities to contribute to a better management of environmental risk in the companies (ml)

  7. Risk Assessment of Healthcare Waste by Preliminary Hazard Analysis Method

    Directory of Open Access Journals (Sweden)

    Pouran Morovati

    2017-09-01

    Full Text Available Introduction and purpose: Improper management of healthcare waste (HCW can pose considerable risks to human health and the environment and cause serious problems in developing countries such as Iran. In this study, we sought to determine the hazards of HCW in the public hospitals affiliated to Abadan School of Medicine using the preliminary hazard analysis (PHA method. Methods: In this descriptive and analytic study, health risk assessment of HCW in government hospitals affiliated to Abadan School of Medicine (4 public hospitals was carried out by using PHA in the summer of  2016. Results: We noted the high risk of sharps and infectious wastes. Considering the dual risk of injury and disease transmission, sharps were classified in the very high-risk group, and pharmaceutical and chemical and radioactive wastes were classified in the medium-risk group. Sharps posed the highest risk, while pharmaceutical and chemical wastes had the lowest risk. Among the various stages of waste management, the waste treatment stage was the most hazardous in all the studied hospitals. Conclusion: To diminish the risks associated with healthcare waste management in the studied hospitals, adequate training of healthcare workers and care providers, provision of suitable personal protective and transportation equipment, and supervision of the environmental health manager of hospitals should be considered by the authorities.  

  8. Risk analysis for decision support in electricity distribution system asset management: methods and frameworks for analysing intangible risks

    Energy Technology Data Exchange (ETDEWEB)

    Nordgaard, Dag Eirik

    2010-04-15

    During the last 10 to 15 years electricity distribution companies throughout the world have been ever more focused on asset management as the guiding principle for their activities. Within asset management, risk is a key issue for distribution companies, together with handling of cost and performance. There is now an increased awareness of the need to include risk analyses into the companies' decision making processes. Much of the work on risk in electricity distribution systems has focused on aspects of reliability. This is understandable, since it is surely an important feature of the product delivered by the electricity distribution infrastructure, and it is high on the agenda for regulatory authorities in many countries. However, electricity distribution companies are also concerned with other risks relevant for their decision making. This typically involves intangible risks, such as safety, environmental impacts and company reputation. In contrast to the numerous methodologies developed for reliability risk analysis, there are relatively few applications of structured analyses to support decisions concerning intangible risks, even though they represent an important motivation for decisions taken in electricity distribution companies. The overall objective of this PhD work has been to explore risk analysis methods that can be used to improve and support decision making in electricity distribution system asset management, with an emphasis on the analysis of intangible risks. The main contributions of this thesis can be summarised as: An exploration and testing of quantitative risk analysis (QRA) methods to support decisions concerning intangible risks; The development of a procedure for using life curve models to provide input to QRA models; The development of a framework for risk-informed decision making where QRA are used to analyse selected problems; In addition, the results contribute to clarify the basic concepts of risk, and highlight challenges

  9. Risk uncertainty analysis methods for NUREG-1150

    International Nuclear Information System (INIS)

    Benjamin, A.S.; Boyd, G.J.

    1987-01-01

    Evaluation and display of risk uncertainties for NUREG-1150 constitute a principal focus of the Severe Accident Risk Rebaselining/Risk Reduction Program (SARRP). Some of the principal objectives of the uncertainty evaluation are: (1) to provide a quantitative estimate that reflects, for those areas considered, a credible and realistic range of uncertainty in risk; (2) to rank the various sources of uncertainty with respect to their importance for various measures of risk; and (3) to characterize the state of understanding of each aspect of the risk assessment for which major uncertainties exist. This paper describes the methods developed to fulfill these objectives

  10. Methods of risk assessment

    International Nuclear Information System (INIS)

    Jones, D.R.

    1981-01-01

    The subject is discussed under the headings: introduction (identification, quantification of risk); some approaches to risk evaluation (use of the 'no risk' principle; the 'acceptable risk' method; risk balancing; comparison of risks, benefits and other costs); cost benefit analysis; an alternative approach (tabulation and display; description and reduction of the data table); identification of potential decision sets consistent with the constraints. Some references are made to nuclear power. (U.K.)

  11. The integration methods of fuzzy fault mode and effect analysis and fault tree analysis for risk analysis of yogurt production

    Science.gov (United States)

    Aprilia, Ayu Rizky; Santoso, Imam; Ekasari, Dhita Murita

    2017-05-01

    Yogurt is a product based on milk, which has beneficial effects for health. The process for the production of yogurt is very susceptible to failure because it involves bacteria and fermentation. For an industry, the risks may cause harm and have a negative impact. In order for a product to be successful and profitable, it requires the analysis of risks that may occur during the production process. Risk analysis can identify the risks in detail and prevent as well as determine its handling, so that the risks can be minimized. Therefore, this study will analyze the risks of the production process with a case study in CV.XYZ. The method used in this research is the Fuzzy Failure Mode and Effect Analysis (fuzzy FMEA) and Fault Tree Analysis (FTA). The results showed that there are 6 risks from equipment variables, raw material variables, and process variables. Those risks include the critical risk, which is the risk of a lack of an aseptic process, more specifically if starter yogurt is damaged due to contamination by fungus or other bacteria and a lack of sanitation equipment. The results of quantitative analysis of FTA showed that the highest probability is the probability of the lack of an aseptic process, with a risk of 3.902%. The recommendations for improvement include establishing SOPs (Standard Operating Procedures), which include the process, workers, and environment, controlling the starter of yogurt and improving the production planning and sanitation equipment using hot water immersion.

  12. Risk-based analysis methods applied to nuclear power plant technical specifications

    International Nuclear Information System (INIS)

    Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

    1989-01-01

    A computer-aided methodology and practical applications of risk-based evaluation of technical specifications are described. The methodology, developed for use by the utility industry, is a part of the overall process of improving nuclear power plant technical specifications. The SOCRATES computer program uses the results of a probabilistic risk assessment or a system-level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at the plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns and decreasing labor requirements for test and maintenance activities, with no adverse impacts on risk. The methodology and the SOCRATES computer program have been used extensively toe valuate several actual technical specifications in case studies demonstrating the methods. Summaries of these applications demonstrate the types of results achieved and the usefulness of the risk-based evaluation in improving the technical specifications

  13. International Conference on Risk Analysis

    CERN Document Server

    Oliveira, Teresa; Rigas, Alexandros; Gulati, Sneh

    2015-01-01

    This book covers the latest results in the field of risk analysis. Presented topics include probabilistic models in cancer research, models and methods in longevity, epidemiology of cancer risk, engineering reliability and economical risk problems. The contributions of this volume originate from the 5th International Conference on Risk Analysis (ICRA 5). The conference brought together researchers and practitioners working in the field of risk analysis in order to present new theoretical and computational methods with applications in biology, environmental sciences, public health, economics and finance.

  14. A comparison of two prospective risk analysis methods: Traditional FMEA and a modified healthcare FMEA.

    Science.gov (United States)

    Rah, Jeong-Eun; Manger, Ryan P; Yock, Adam D; Kim, Gwe-Ya

    2016-12-01

    To examine the abilities of a traditional failure mode and effects analysis (FMEA) and modified healthcare FMEA (m-HFMEA) scoring methods by comparing the degree of congruence in identifying high risk failures. The authors applied two prospective methods of the quality management to surface image guided, linac-based radiosurgery (SIG-RS). For the traditional FMEA, decisions on how to improve an operation were based on the risk priority number (RPN). The RPN is a product of three indices: occurrence, severity, and detectability. The m-HFMEA approach utilized two indices, severity and frequency. A risk inventory matrix was divided into four categories: very low, low, high, and very high. For high risk events, an additional evaluation was performed. Based upon the criticality of the process, it was decided if additional safety measures were needed and what they comprise. The two methods were independently compared to determine if the results and rated risks matched. The authors' results showed an agreement of 85% between FMEA and m-HFMEA approaches for top 20 risks of SIG-RS-specific failure modes. The main differences between the two approaches were the distribution of the values and the observation that failure modes (52, 54, 154) with high m-HFMEA scores do not necessarily have high FMEA-RPN scores. In the m-HFMEA analysis, when the risk score is determined, the basis of the established HFMEA Decision Tree™ or the failure mode should be more thoroughly investigated. m-HFMEA is inductive because it requires the identification of the consequences from causes, and semi-quantitative since it allows the prioritization of high risks and mitigation measures. It is therefore a useful tool for the prospective risk analysis method to radiotherapy.

  15. Comparative risk analysis

    International Nuclear Information System (INIS)

    Niehaus, F.

    1988-01-01

    In this paper, the risks of various energy systems are discussed considering severe accidents analysis, particularly the probabilistic safety analysis, and probabilistic safety criteria, and the applications of these criteria and analysis. The comparative risk analysis has demonstrated that the largest source of risk in every society is from daily small accidents. Nevertheless, we have to be more concerned about severe accidents. The comparative risk analysis of five different energy systems (coal, oil, gas, LWR and STEC (Solar)) for the public has shown that the main sources of risks are coal and oil. The latest comparative risk study of various energy has been conducted in the USA and has revealed that the number of victims from coal is 42 as many than victims from nuclear. A study for severe accidents from hydro-dams in United States has estimated the probability of dam failures at 1 in 10,000 years and the number of victims between 11,000 and 260,000. The average occupational risk from coal is one fatal accident in 1,000 workers/year. The probabilistic safety analysis is a method that can be used to assess nuclear energy risks, and to analyze the severe accidents, and to model all possible accident sequences and consequences. The 'Fault tree' analysis is used to know the probability of failure of the different systems at each point of accident sequences and to calculate the probability of risks. After calculating the probability of failure, the criteria for judging the numerical results have to be developed, that is the quantitative and qualitative goals. To achieve these goals, several systems have been devised by various countries members of AIEA. The probabilistic safety ana-lysis method has been developed by establishing a computer program permit-ting to know different categories of safety related information. 19 tabs. (author)

  16. MATHEMATICAL RISK ANALYSIS: VIA NICHOLAS RISK MODEL AND BAYESIAN ANALYSIS

    Directory of Open Access Journals (Sweden)

    Anass BAYAGA

    2010-07-01

    Full Text Available The objective of this second part of a two-phased study was to explorethe predictive power of quantitative risk analysis (QRA method andprocess within Higher Education Institution (HEI. The method and process investigated the use impact analysis via Nicholas risk model and Bayesian analysis, with a sample of hundred (100 risk analysts in a historically black South African University in the greater Eastern Cape Province.The first findings supported and confirmed previous literature (KingIII report, 2009: Nicholas and Steyn, 2008: Stoney, 2007: COSA, 2004 that there was a direct relationship between risk factor, its likelihood and impact, certiris paribus. The second finding in relation to either controlling the likelihood or the impact of occurrence of risk (Nicholas risk model was that to have a brighter risk reward, it was important to control the likelihood ofoccurrence of risks as compared with its impact so to have a direct effect on entire University. On the Bayesian analysis, thus third finding, the impact of risk should be predicted along three aspects. These aspects included the human impact (decisions made, the property impact (students and infrastructural based and the business impact. Lastly, the study revealed that although in most business cases, where as business cycles considerably vary dependingon the industry and or the institution, this study revealed that, most impacts in HEI (University was within the period of one academic.The recommendation was that application of quantitative risk analysisshould be related to current legislative framework that affects HEI.

  17. Comparing 3 dietary pattern methods--cluster analysis, factor analysis, and index analysis--With colorectal cancer risk: The NIH-AARP Diet and Health Study.

    Science.gov (United States)

    Reedy, Jill; Wirfält, Elisabet; Flood, Andrew; Mitrou, Panagiota N; Krebs-Smith, Susan M; Kipnis, Victor; Midthune, Douglas; Leitzmann, Michael; Hollenbeck, Albert; Schatzkin, Arthur; Subar, Amy F

    2010-02-15

    The authors compared dietary pattern methods-cluster analysis, factor analysis, and index analysis-with colorectal cancer risk in the National Institutes of Health (NIH)-AARP Diet and Health Study (n = 492,306). Data from a 124-item food frequency questionnaire (1995-1996) were used to identify 4 clusters for men (3 clusters for women), 3 factors, and 4 indexes. Comparisons were made with adjusted relative risks and 95% confidence intervals, distributions of individuals in clusters by quintile of factor and index scores, and health behavior characteristics. During 5 years of follow-up through 2000, 3,110 colorectal cancer cases were ascertained. In men, the vegetables and fruits cluster, the fruits and vegetables factor, the fat-reduced/diet foods factor, and all indexes were associated with reduced risk; the meat and potatoes factor was associated with increased risk. In women, reduced risk was found with the Healthy Eating Index-2005 and increased risk with the meat and potatoes factor. For men, beneficial health characteristics were seen with all fruit/vegetable patterns, diet foods patterns, and indexes, while poorer health characteristics were found with meat patterns. For women, findings were similar except that poorer health characteristics were seen with diet foods patterns. Similarities were found across methods, suggesting basic qualities of healthy diets. Nonetheless, findings vary because each method answers a different question.

  18. Analysis of risk of nonconformities and applied quality inspection methods in the process of aluminium profiles coating based on FMEA results

    Directory of Open Access Journals (Sweden)

    Krzysztof Knop

    2017-10-01

    Full Text Available The article presents the results of risk analysis associated with nonconformities of aluminium profiles in the process of coating and quality inspection methods used to their detection. Analysis of risk was done based on results of FMEA method. Evaluated quality inspection methods were distinguished based on the term of inspection in the ISO 9000:2005 norm. Manufacturing process of aluminium profile in micro-technological approach was presented. Triple quantification of nonconformities risk based on the FMEA method by using three different approaches was conducted. Analysis of nonconformities risks associated with the use of specific quality inspection methods was done. In the last part the analysis of causes of critical nonconformities, proposals for improvement actions reducing the risk of the critical nonconformities and applied critical quality inspection method were showed.

  19. A background risk analysis. Vol. 1

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques, described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 1 contains a short history of risk analysis, and chapters on risk, failures, errors and accidents, and general procedures for risk analysis. (BP)

  20. A structured hazard analysis and risk assessment method for automotive systems—A descriptive study

    International Nuclear Information System (INIS)

    Beckers, Kristian; Holling, Dominik; Côté, Isabelle; Hatebur, Denis

    2017-01-01

    The 2011 release of the first version of the ISO 26262 standard for automotive systems demand the elicitation of safety goals following a rigorous method for hazard and risk analysis. Companies are struggling with the adoption of the standard due to ambiguities, documentation demands and the alignment of the standards demands to existing processes. We previously proposed a structured engineering method to deal with these problems developed in applying action research together with an OEM. In this work, we evaluate how applicable the method is for junior automotive software engineers by a descriptive study. We provided the method to 8 members of the master course Automotive Software Engineering (ASE) at the Technical University Munich. The participants have each been working in the automotive industry for 1–4 years in parallel to their studies. We investigated their application of our method to an electronic steering column lock system. The participants applied our method in a first round alone and afterwards discussed their results in groups. Our data analysis revealed that the participants could apply the method successfully and the hazard analysis and risk assessment achieved a high precision and productivity. Moreover, the precision could be improved significantly during group discussions.

  1. Risk-based security cost-benefit analysis: method and example applications - 59381

    International Nuclear Information System (INIS)

    Wyss, Gregory; Hinton, John; Clem, John; Silva, Consuelo; Duran, Felicia A.

    2012-01-01

    Document available in abstract form only. Full text of publication follows: Decision makers wish to use risk-based cost-benefit analysis to prioritize security investments. However, understanding security risk requires estimating the likelihood of attack, which is extremely uncertain and depends on unquantifiable psychological factors like dissuasion and deterrence. In addition, the most common performance metric for physical security systems, probability of effectiveness at the design basis threat [P(E)], performs poorly in cost-benefit analysis. It is extremely sensitive to small changes in adversary characteristics when the threat is near a systems breaking point, but very insensitive to those changes under other conditions. This makes it difficult to prioritize investment options on the basis of P(E), especially across multiple targets or facilities. To overcome these obstacles, a Sandia National Laboratories Laboratory Directed Research and Development project has developed a risk-based security cost-benefit analysis method. This approach characterizes targets by how difficult it would be for adversaries to exploit each targets vulnerabilities to induce consequences. Adversaries generally have success criteria (e.g., adequate or desired consequences and thresholds for likelihood of success), and choose among alternative strategies that meet these criteria while considering their degree of difficulty in achieving their successful outcome. Investments reduce security risk as they reduce the severity of consequences available and/or increase the difficulty for an adversary to successfully accomplish their most advantageous attack

  2. Dependent failure analysis research for the US NRC Risk Methods Integration and Evaluation Program

    International Nuclear Information System (INIS)

    Bohn, M.P.; Stack, D.W.; Campbell, D.J.; Rooney, J.J.; Rasmuson, D.M.

    1985-01-01

    The Risk Methods Integration and Evaluation Program (RMIEP), which is being performed for the Nuclear Regulatory Commission by Sandia National Laboratories, has the goals of developing new risk assessment methods and integrating the new and existing methods in a uniform procedure for performing an in-depth probabilistic risk assessment (PRA) with consistent levels of analysis for internal, external, and dependent failure scenarios. An important part of RMIEP is the recognition of the crucial importance of dependent common cause failures (CCFs) and the pressing need to develop effective methods for analyzing CCFs as part of a PRA. The NRC-sponsored Integrated Dependent Failure Methodology Program at Sandia is addressing this need. This paper presents a preliminary approach for analyzing CCFs as part of a PRA. A nine-step procedure for efficiently screening and analyzing dependent failure scenarios is presented, and each step is discussed

  3. Risk assessment in a foundry unit by energy trace and barrier analysis method (ETBA

    Directory of Open Access Journals (Sweden)

    S.A. Ayati

    2010-01-01

    Full Text Available Background and aimsAs a Development of Industrial process, human, environment,equipment, material and validity of system has been exposed to hazardous conditions. Regards of32.3 percent of occupations in industries, this study focused on risk assessment of foundry unit byenergy trace and barrier analysis (ETBA method and presented approaches to control of accident.Methodsthe recent study is as a case study one to risk assessment in a foundry unit in Qazvinindustrial city in1387. In this study risks were founded by ETBA method and evaluated by MILSTD-882B. Data were collected by direct observations, interview with workers and supervisorand engineers, walking-talking through method, documents investigation of operationalprocessors, preventive maintenances, equipment technical properties, accidental and medicaldocuments. Finally ETBA worksheets completed.Findingstotally 154 risks has been found. 40 from total are been unacceptable risk, 68unfavorable and also 46 acceptable but with remediation action. Casting workshop had risks morethan other workshops (with 74 identified risks.Potential and heat energies were founded as mosthazardous energies, with respectively 51 and 38 risk cases.ConclusionThis study recommended to be done actions for identification and control risk,such as: safety training, occupation training, preventive maintenance, contract safety, safetycommunication and safety audit group.

  4. Probabilistic risk analysis and terrorism risk.

    Science.gov (United States)

    Ezell, Barry Charles; Bennett, Steven P; von Winterfeldt, Detlof; Sokolowski, John; Collins, Andrew J

    2010-04-01

    Since the terrorist attacks of September 11, 2001, and the subsequent establishment of the U.S. Department of Homeland Security (DHS), considerable efforts have been made to estimate the risks of terrorism and the cost effectiveness of security policies to reduce these risks. DHS, industry, and the academic risk analysis communities have all invested heavily in the development of tools and approaches that can assist decisionmakers in effectively allocating limited resources across the vast array of potential investments that could mitigate risks from terrorism and other threats to the homeland. Decisionmakers demand models, analyses, and decision support that are useful for this task and based on the state of the art. Since terrorism risk analysis is new, no single method is likely to meet this challenge. In this article we explore a number of existing and potential approaches for terrorism risk analysis, focusing particularly on recent discussions regarding the applicability of probabilistic and decision analytic approaches to bioterrorism risks and the Bioterrorism Risk Assessment methodology used by the DHS and criticized by the National Academies and others.

  5. A background to risk analysis. Vol. 2

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 2 treats generic methods of qualitative failure analysis. (BP)

  6. Method of assessing a lipid-related health risk based on ion mobility analysis of lipoproteins

    Science.gov (United States)

    Benner, W. Henry; Krauss, Ronald M.; Blanche, Patricia J.

    2010-12-14

    A medical diagnostic method and instrumentation system for analyzing noncovalently bonded agglomerated biological particles is described. The method and system comprises: a method of preparation for the biological particles; an electrospray generator; an alpha particle radiation source; a differential mobility analyzer; a particle counter; and data acquisition and analysis means. The medical device is useful for the assessment of human diseases, such as cardiac disease risk and hyperlipidemia, by rapid quantitative analysis of lipoprotein fraction densities. Initially, purification procedures are described to reduce an initial blood sample to an analytical input to the instrument. The measured sizes from the analytical sample are correlated with densities, resulting in a spectrum of lipoprotein densities. The lipoprotein density distribution can then be used to characterize cardiac and other lipid-related health risks.

  7. Cancer risks, risk-cost-benefit analyses, and the scientific method

    International Nuclear Information System (INIS)

    Seiler, F.A.; Alvarez, J.L.

    1995-01-01

    Two main changes in risk analysis are increasingly beginning to influence the manner in which, in the perception of scientists, low-dose modeling of radiation carcinogenesis is supposed to be done. In the past, efforts to model radiation risks have been carried out under the banner of scientific endeavors. On closer inspection, however, it has become obvious that these efforts were not guided by the scientific method and that a change in approach is needed. We realize increasingly that risk analysis is not done in a vacuum and that any action taken due to the result of the analysis not only has a benefit in the form of a risk reduction but leads inevitably to an increase in cost and an increase in the risks of persons effecting the benefit. Thus, a risk-cost-benefit analysis should be done and show a clear-cut net benefit before a remedial action is taken

  8. Handbook of methods for risk-based analysis of technical specifications

    International Nuclear Information System (INIS)

    Samanta, P.K.; Kim, I.S.; Mankamo, T.; Vesely, W.E.

    1996-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operations (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analyses and engineering judgments. Improvements in these requirements are facilitated by the availability of plant-specific Probabilistic Risk Assessments (PRAs). The US Nuclear Regulatory Commission (USNRC) Office of Research sponsored research to develop systematic, risk-based methods to improve various aspects of TS requirements. A handbook of methods summarizing such risk-based approaches has been completed in 1994. It is expected that this handbook will provide valuable input to NRC's present work in developing guidance for using PRA in risk-informed regulation. The handbook addresses reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), managing plant configurations, and scheduling maintenance

  9. Generalized indices for radiation risk analysis

    International Nuclear Information System (INIS)

    Bykov, A.A.; Demin, V.F.

    1989-01-01

    A new approach to ensuring nuclear safety has begun forming since the early eighties. The approach based on the probabilistic safety analysis, the principles of acceptable risk, the optimization of safety measures, etc. has forced a complex of adequate quantitative methods of assessment, safety analysis and risk management to be developed. The method of radiation risk assessment and analysis hold a prominent place in the complex. National and international research and regulatory organizations ICRP, IAEA, WHO, UNSCEAR, OECD/NEA have given much attention to the development of the conceptual and methodological basis of those methods. Some resolutions of the National Commission of Radiological Protection (NCRP) and the Problem Commission on Radiation Hygiene of the USSR Ministry of Health should be also noted. Both CBA (cost benefit analysis) and other methods of radiation risk analysis and safety management use a system of natural and socio-economic indices characterizing the radiation risk or damage. There exist a number of problems associated with the introduction, justification and use of these indices. For example, the price, a, of radiation damage, or collective dose unit, is a noteworthy index. The difficulties in its qualitative and quantitative determination are still an obstacle for a wide application of CBA to the radiation risk analysis and management. During recent 10-15 years these problems have been a subject of consideration for many authors. The present paper also considers the issues of the qualitative and quantitative justification of the indices of radiation risk analysis

  10. A background to risk analysis. Vol. 3

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justifi- cation or evaluation, this is given in the form of a chapter appenix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 3 contains chapters on quantification of risk, failure and accident probability, risk analysis and design, and examles of risk analysis for process plant. (BP)

  11. Summary of EPA's risk assessment results from the analysis of alternative methods of low-level waste disposal

    International Nuclear Information System (INIS)

    Bandrowski, M.S.; Hung, C.Y.; Meyer, G.L.; Rogers, V.C.

    1987-01-01

    Evaluation of the potential health risk and individual exposure from a broad number of disposal alternatives is an important part of EPA's program to develop generally applicable environmental standards for the land disposal of low-level radioactive wastes (LLW). The Agency has completed an analysis of the potential population health risks and maximum individual exposures from ten disposal methods under three different hydrogeological and climatic settings. This paper briefly describes the general input and analysis procedures used in the risk assessment for LLW disposal and presents their preliminary results. Some important lessons learned from simulating LLW disposal under a large variety of methods and conditions are identified

  12. Uncertainty Analysis and Overtopping Risk Evaluation of Maroon Dam withMonte Carlo and Latin Hypercube Methods

    Directory of Open Access Journals (Sweden)

    J. M. Vali Samani

    2016-02-01

    Full Text Available Introduction: The greatest part of constructed dams belongs to embankment dams and there are many examples of their failures throughout history. About one-third of the world’s dam failures have been caused by flood overtopping, which indicates that flood overtopping is an important factor affecting reservoir projects’ safety. Moreover, because of a poor understanding of the randomness of floods, reservoir water levels during flood seasons are often lowered artificially in order to avoid overtopping and protect the lives and property of downstream residents. So, estimation of dam overtopping risk with regard to uncertainties is more important than achieving the dam’s safety. This study presents the procedure for risk evaluation of dam overtopping due to various uncertaintiess in inflows and reservoir initial condition. Materials and Methods: This study aims to present a practical approach and compare the different uncertainty analysis methods in the evaluation of dam overtopping risk due to flood. For this purpose, Monte Carlo simulation and Latin hypercube sampling methods were used to calculate the overtopping risk, evaluate the uncertainty, and calculate the highest water level during different flood events. To assess these methods from a practical point of view, the Maroon dam was chosen for the case study. Figure. 1 indicates the work procedure, including three parts: 1 Identification and evaluation of effective factors on flood routing and dam overtopping, 2 Data collection and analysis for reservoir routing and uncertainty analysis, 3 Uncertainty and risk analysis. Figure 1- Diagram of dam overtopping risk evaluation Results and Discussion: Figure 2 shows the results of the computed overtopping risks for the Maroon Dam without considering the wind effect, for the initial water level of 504 m as an example. As it is shown in Figure. 2, the trends of the risk curves computed by the different uncertainty analysis methods are similar

  13. Stochastic Drought Risk Analysis and Projection Methods For Thermoelectric Power Systems

    Science.gov (United States)

    Bekera, Behailu Belamo

    Combined effects of socio-economic, environmental, technological and political factors impact fresh cooling water availability, which is among the most important elements of thermoelectric power plant site selection and evaluation criteria. With increased variability and changes in hydrologic statistical stationarity, one concern is the increased occurrence of extreme drought events that may be attributable to climatic changes. As hydrological systems are altered, operators of thermoelectric power plants need to ensure a reliable supply of water for cooling and generation requirements. The effects of climate change are expected to influence hydrological systems at multiple scales, possibly leading to reduced efficiency of thermoelectric power plants. This study models and analyzes drought characteristics from a thermoelectric systems operational and regulation perspective. A systematic approach to characterize a stream environment in relation to extreme drought occurrence, duration and deficit-volume is proposed and demonstrated. More specifically, the objective of this research is to propose a stochastic water supply risk analysis and projection methods from thermoelectric power systems operation and management perspectives. The study defines thermoelectric drought as a shortage of cooling water due to stressed supply or beyond operable water temperature limits for an extended period of time requiring power plants to reduce production or completely shut down. It presents a thermoelectric drought risk characterization framework that considers heat content and water quantity facets of adequate water availability for uninterrupted operation of such plants and safety of its surroundings. In addition, it outlines mechanisms to identify rate of occurrences of the said droughts and stochastically quantify subsequent potential losses to the sector. This mechanism is enabled through a model based on compound Nonhomogeneous Poisson Process. This study also demonstrates how

  14. Is risk analysis scientific?

    Science.gov (United States)

    Hansson, Sven Ove; Aven, Terje

    2014-07-01

    This article discusses to what extent risk analysis is scientific in view of a set of commonly used definitions and criteria. We consider scientific knowledge to be characterized by its subject matter, its success in developing the best available knowledge in its fields of study, and the epistemic norms and values that guide scientific investigations. We proceed to assess the field of risk analysis according to these criteria. For this purpose, we use a model for risk analysis in which science is used as a base for decision making on risks, which covers the five elements evidence, knowledge base, broad risk evaluation, managerial review and judgment, and the decision; and that relates these elements to the domains experts and decisionmakers, and to the domains fact-based or value-based. We conclude that risk analysis is a scientific field of study, when understood as consisting primarily of (i) knowledge about risk-related phenomena, processes, events, etc., and (ii) concepts, theories, frameworks, approaches, principles, methods and models to understand, assess, characterize, communicate, and manage risk, in general and for specific applications (the instrumental part). © 2014 Society for Risk Analysis.

  15. Risk assessment theory, methods, and applications

    CERN Document Server

    Rausand, Marvin

    2011-01-01

    With its balanced coverage of theory and applications along with standards and regulations, Risk Assessment: Theory, Methods, and Applications serves as a comprehensive introduction to the topic. The book serves as a practical guide to current risk analysis and risk assessment, emphasizing the possibility of sudden, major accidents across various areas of practice from machinery and manufacturing processes to nuclear power plants and transportation systems. The author applies a uniform framework to the discussion of each method, setting forth clear objectives and descriptions, while also shedding light on applications, essential resources, and advantages and disadvantages. Following an introduction that provides an overview of risk assessment, the book is organized into two sections that outline key theory, methods, and applications. * Introduction to Risk Assessment defines key concepts and details the steps of a thorough risk assessment along with the necessary quantitative risk measures. Chapters outline...

  16. Analysis of risk of nonconformities and applied quality inspection methods in the process of aluminium profiles coating based on FMEA results

    OpenAIRE

    Krzysztof Knop

    2017-01-01

    The article presents the results of risk analysis associated with nonconformities of aluminium profiles in the process of coating and quality inspection methods used to their detection. Analysis of risk was done based on results of FMEA method. Evaluated quality inspection methods were distinguished based on the term of inspection in the ISO 9000:2005 norm. Manufacturing process of aluminium profile in micro-technological approach was presented. Triple quantification of nonconformities risk b...

  17. Comparative Analysis of Fuzzy Set Defuzzification Methods in the Context of Ecological Risk Assessment

    Directory of Open Access Journals (Sweden)

    Užga-Rebrovs Oļegs

    2017-12-01

    Full Text Available Fuzzy inference systems are widely used in various areas of human activity. Their most widespread use lies in the field of fuzzy control of technical devices of different kind. Another direction of using fuzzy inference systems is modelling and assessment of different kind of risks under insufficient or missing objective initial data. Fuzzy inference is concluded by the procedure of defuzzification of the resulting fuzzy sets. A large number of techniques for implementing the defuzzification procedure are available nowadays. The paper presents a comparative analysis of some widespread methods of fuzzy set defuzzification, and proposes the most appropriate methods in the context of ecological risk assessment.

  18. An improved method for risk evaluation in failure modes and effects analysis of CNC lathe

    Science.gov (United States)

    Rachieru, N.; Belu, N.; Anghel, D. C.

    2015-11-01

    Failure mode and effects analysis (FMEA) is one of the most popular reliability analysis tools for identifying, assessing and eliminating potential failure modes in a wide range of industries. In general, failure modes in FMEA are evaluated and ranked through the risk priority number (RPN), which is obtained by the multiplication of crisp values of the risk factors, such as the occurrence (O), severity (S), and detection (D) of each failure mode. However, the crisp RPN method has been criticized to have several deficiencies. In this paper, linguistic variables, expressed in Gaussian, trapezoidal or triangular fuzzy numbers, are used to assess the ratings and weights for the risk factors S, O and D. A new risk assessment system based on the fuzzy set theory and fuzzy rule base theory is to be applied to assess and rank risks associated to failure modes that could appear in the functioning of Turn 55 Lathe CNC. Two case studies have been shown to demonstrate the methodology thus developed. It is illustrated a parallel between the results obtained by the traditional method and fuzzy logic for determining the RPNs. The results show that the proposed approach can reduce duplicated RPN numbers and get a more accurate, reasonable risk assessment. As a result, the stability of product and process can be assured.

  19. Augmenting the Deliberative Method for Ranking Risks.

    Science.gov (United States)

    Susel, Irving; Lasley, Trace; Montezemolo, Mark; Piper, Joel

    2016-01-01

    The Department of Homeland Security (DHS) characterized and prioritized the physical cross-border threats and hazards to the nation stemming from terrorism, market-driven illicit flows of people and goods (illegal immigration, narcotics, funds, counterfeits, and weaponry), and other nonmarket concerns (movement of diseases, pests, and invasive species). These threats and hazards pose a wide diversity of consequences with very different combinations of magnitudes and likelihoods, making it very challenging to prioritize them. This article presents the approach that was used at DHS to arrive at a consensus regarding the threats and hazards that stand out from the rest based on the overall risk they pose. Due to time constraints for the decision analysis, it was not feasible to apply multiattribute methodologies like multiattribute utility theory or the analytic hierarchy process. Using a holistic approach was considered, such as the deliberative method for ranking risks first published in this journal. However, an ordinal ranking alone does not indicate relative or absolute magnitude differences among the risks. Therefore, the use of the deliberative method for ranking risks is not sufficient for deciding whether there is a material difference between the top-ranked and bottom-ranked risks, let alone deciding what the stand-out risks are. To address this limitation of ordinal rankings, the deliberative method for ranking risks was augmented by adding an additional step to transform the ordinal ranking into a ratio scale ranking. This additional step enabled the selection of stand-out risks to help prioritize further analysis. © 2015 Society for Risk Analysis.

  20. A background to risk analysis. Vol. 4

    International Nuclear Information System (INIS)

    Taylor, J.R.

    1979-01-01

    This 4-volumes report gives a background of ideas, principles, and examples which might be of use in developing practical methods for risk analysis. Some of the risk analysis techniques described are somewhat experimental. The report is written in an introductory style, but where some point needs further justification or evaluation, this is given in the form of a chapter appendix. In this way, it is hoped that the report can serve two purposes, - as a basis for starting risk analysis work and as a basis for discussing effectiveness of risk analysis procedures. The report should be seen as a preliminary stage, prior to a program of industrial trials of risk analysis methods. Vol. 4 treats human error in plant operation. (BP)

  1. Prediction Model of Collapse Risk Based on Information Entropy and Distance Discriminant Analysis Method

    Directory of Open Access Journals (Sweden)

    Hujun He

    2017-01-01

    Full Text Available The prediction and risk classification of collapse is an important issue in the process of highway construction in mountainous regions. Based on the principles of information entropy and Mahalanobis distance discriminant analysis, we have produced a collapse hazard prediction model. We used the entropy measure method to reduce the influence indexes of the collapse activity and extracted the nine main indexes affecting collapse activity as the discriminant factors of the distance discriminant analysis model (i.e., slope shape, aspect, gradient, and height, along with exposure of the structural face, stratum lithology, relationship between weakness face and free face, vegetation cover rate, and degree of rock weathering. We employ postearthquake collapse data in relation to construction of the Yingxiu-Wolong highway, Hanchuan County, China, as training samples for analysis. The results were analyzed using the back substitution estimation method, showing high accuracy and no errors, and were the same as the prediction result of uncertainty measure. Results show that the classification model based on information entropy and distance discriminant analysis achieves the purpose of index optimization and has excellent performance, high prediction accuracy, and a zero false-positive rate. The model can be used as a tool for future evaluation of collapse risk.

  2. Risk Analysis of Telecom Enterprise Financing

    Institute of Scientific and Technical Information of China (English)

    YU Hua; SHU Hua-ying

    2005-01-01

    The main research objects in this paper are the causes searching and risk estimating method for telecom enterprises' financial risks. The multi-mode financing for telecom enterprises makes it flexible to induce the capital and obtain the profit by corresponding projects. But there are also potential risks going with these financing modes. After making analysis of categories and causes of telecom enterprises' financing risk, a method by Analytic Hierarchy Process (AHP) is put forward to estimating the financing risk. And the author makes her suggestion and opinion by example analysis, in order to provide some ideas and basis for telecom enterprise's financing decision-making.

  3. Safety analysis, risk assessment, and risk acceptance criteria

    International Nuclear Information System (INIS)

    Jamali, K.

    1997-01-01

    This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities and that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, 'ensuring' plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is 'safe.' Use of RACs requires quantitative estimates of consequence frequency and magnitude

  4. Companies Credit Risk Assessment Methods for Investment Decision Making

    Directory of Open Access Journals (Sweden)

    Dovilė Peškauskaitė

    2017-06-01

    Full Text Available As the banks have tightened lending requirements, companies look for alternative sources of external funding. One of such is bonds issue. Unfortunately, corporate bonds issue as a source of funding is rare in Lithuania. This occurs because companies face with a lack of information, investors fear to take on credit risk. Credit risk is defined as a borrower’s failure to meet its obligation. Investors, in order to avoid credit risk, have to assess the state of the companies. The goal of the article is to determine the most informative methods of credit risk assessment. The article summarizes corporate lending sources, analyzes corporate default causes and credit risk assessment methods. The study based on the SWOT analysis shows that investors before making an investment decision should evaluate both the business risk,using qualitative method CAMPARI, and the financial risk, using financial ratio analysis.

  5. Advances in probabilistic risk analysis

    International Nuclear Information System (INIS)

    Hardung von Hardung, H.

    1982-01-01

    Probabilistic risk analysis can now look back upon almost a quarter century of intensive development. The early studies, whose methods and results are still referred to occasionally, however, only permitted rough estimates to be made of the probabilities of recognizable accident scenarios, failing to provide a method which could have served as a reference base in calculating the overall risk associated with nuclear power plants. The first truly solid attempt was the Rasmussen Study and, partly based on it, the German Risk Study. In those studies, probabilistic risk analysis has been given a much more precise basis. However, new methodologies have been developed in the meantime, which allow much more informative risk studies to be carried out. They have been found to be valuable tools for management decisions with respect to backfitting, reinforcement and risk limitation. Today they are mainly applied by specialized private consultants and have already found widespread application especially in the USA. (orig.) [de

  6. Adversarial risk analysis

    CERN Document Server

    Banks, David L; Rios Insua, David

    2015-01-01

    Flexible Models to Analyze Opponent Behavior A relatively new area of research, adversarial risk analysis (ARA) informs decision making when there are intelligent opponents and uncertain outcomes. Adversarial Risk Analysis develops methods for allocating defensive or offensive resources against intelligent adversaries. Many examples throughout illustrate the application of the ARA approach to a variety of games and strategic situations. The book shows decision makers how to build Bayesian models for the strategic calculation of their opponents, enabling decision makers to maximize their expected utility or minimize their expected loss. This new approach to risk analysis asserts that analysts should use Bayesian thinking to describe their beliefs about an opponent's goals, resources, optimism, and type of strategic calculation, such as minimax and level-k thinking. Within that framework, analysts then solve the problem from the perspective of the opponent while placing subjective probability distributions on a...

  7. Method for environmental risk analysis of marine terminals, process industry terminals, pipelines and shipping lanes

    Energy Technology Data Exchange (ETDEWEB)

    Nissen-Lie, Torild R.; Aspholm, Ole O. [DNV Energy, Oslo (Norway)

    2008-07-01

    The paper describes a quantitative method for analyzing the environmental risk of marine terminals, process industry terminals, pipelines and shipping lanes. The method has been used both in Norway and elsewhere in the world; calculating the risk for environmental resources as fish, seabirds and waterfowls, marine mammals, otters, sea turtles and salt marches and other shoreline/sub tidal habitats. The environmental risk is the product of the probability of acute releases and the environmental consequences. Consequences for vulnerable species and habitats are calculated based on oil drift modelling results and a consequence matrix consisting of 5-7 consequence parameter and five consequence levels of increasing seriousness. An average consequence level is calculated on basis of defined weighting factors to provide an overall consequence value for each spill scenario for each species/habitat. An environmental risk analysis highlights the hazards that have to be managed in order to run an environmentally sustainable operation and can also provide input to establish cost-effective oil spill response measures. (author)

  8. Unsharpness-risk analysis

    International Nuclear Information System (INIS)

    Preyssl, C.

    1986-01-01

    Safety analysis provides the only tool for evaluation and quantification of rare or hypothetical events leading to system failure. So far probability theory has been used for the fault- and event-tree methodology. The phenomenon of uncertainties constitutes an important aspect in risk analysis. Uncertainties can be classified as originating from 'randomness' or 'fuzziness'. Probability theory addresses randomness only. The use of 'fuzzy set theory' makes it possible to include both types of uncertainty in the mathematical model of risk analysis. Thus the 'fuzzy fault tree' is expressed in 'possibilistic' terms implying a range of simplifications and improvements. 'Human failure' and 'conditionality' can be treated correctly. Only minimum-maximum relations are used to combine the possibility distributions of events. Various event-classifications facilitate the interpretation of the results. The method is demonstrated by application to a TRIGA-research reactor. Uncertainty as an implicit part of 'fuzzy risk' can be quantified explicitly using an 'uncertainty measure'. Based on this the 'degree of relative compliance' with a quantizative safety goal can be defined for a particular risk. The introduction of 'weighting functionals' guarantees the consideration of the importances attached to different parts of the risk exceeding or complying with the standard. The comparison of two reference systems is demonstrated in a case study. It is concluded that any application of the 'fuzzy risk analysis' has to be free of any hypostatization when reducing subjective to objective information. (Author)

  9. Matching methods to produce maps for pest risk analysis to resources

    Directory of Open Access Journals (Sweden)

    Richard Baker

    2013-09-01

    Full Text Available Decision support systems (DSSs for pest risk mapping are invaluable for guiding pest risk analysts seeking to add maps to pest risk analyses (PRAs. Maps can help identify the area of potential establishment, the area at highest risk and the endangered area for alien plant pests. However, the production of detailed pest risk maps may require considerable time and resources and it is important to match the methods employed to the priority, time and detail required. In this paper, we apply PRATIQUE DSSs to Phytophthora austrocedrae, a pathogen of the Cupressaceae, Thaumetopoea pityocampa, the pine processionary moth, Drosophila suzukii, spotted wing Drosophila, and Thaumatotibia leucotreta, the false codling moth. We demonstrate that complex pest risk maps are not always a high priority and suggest that simple methods may be used to determine the geographic variation in relative risks posed by invasive alien species within an area of concern.

  10. Reliability and validity of risk analysis

    International Nuclear Information System (INIS)

    Aven, Terje; Heide, Bjornar

    2009-01-01

    In this paper we investigate to what extent risk analysis meets the scientific quality requirements of reliability and validity. We distinguish between two types of approaches within risk analysis, relative frequency-based approaches and Bayesian approaches. The former category includes both traditional statistical inference methods and the so-called probability of frequency approach. Depending on the risk analysis approach, the aim of the analysis is different, the results are presented in different ways and consequently the meaning of the concepts reliability and validity are not the same.

  11. Application of risk analysis and quality control methods for improvement of lead molding process

    Directory of Open Access Journals (Sweden)

    H. Gołaś

    2016-10-01

    Full Text Available The aim of the paper is to highlight the significance of implication of risk analysis and quality control methods for the improvement of parameters of lead molding process. For this reason, Fault Mode and Effect Analysis (FMEA was developed in the conceptual stage of a new product TC-G100-NR. However, the final product was faulty (a complete lack of adhesion of brass insert to leak regardless of the previously defined potential problem and its preventive action. It contributed to the recognition of root causes, corrective actions and change of production parameters. It showed how these methods, level of their organization, systematic and rigorous study affect molding process parameters.

  12. Evaluating the risks of clinical research: direct comparative analysis.

    Science.gov (United States)

    Rid, Annette; Abdoler, Emily; Roberson-Nay, Roxann; Pine, Daniel S; Wendler, David

    2014-09-01

    Many guidelines and regulations allow children and adolescents to be enrolled in research without the prospect of clinical benefit when it poses minimal risk. However, few systematic methods exist to determine when research risks are minimal. This situation has led to significant variation in minimal risk judgments, raising concern that some children are not being adequately protected. To address this concern, we describe a new method for implementing the widely endorsed "risks of daily life" standard for minimal risk. This standard defines research risks as minimal when they do not exceed the risks posed by daily life activities or routine examinations. This study employed a conceptual and normative analysis, and use of an illustrative example. Different risks are composed of the same basic elements: Type, likelihood, and magnitude of harm. Hence, one can compare the risks of research and the risks of daily life by comparing the respective basic elements with each other. We use this insight to develop a systematic method, direct comparative analysis, for implementing the "risks of daily life" standard for minimal risk. The method offers a way of evaluating research procedures that pose the same types of risk as daily life activities, such as the risk of experiencing anxiety, stress, or other psychological harm. We thus illustrate how direct comparative analysis can be applied in practice by using it to evaluate whether the anxiety induced by a respiratory CO2 challenge poses minimal or greater than minimal risks in children and adolescents. Direct comparative analysis is a systematic method for applying the "risks of daily life" standard for minimal risk to research procedures that pose the same types of risk as daily life activities. It thereby offers a method to protect children and adolescents in research, while ensuring that important studies are not blocked because of unwarranted concerns about research risks.

  13. Critical review of methods for risk ranking of food related hazards, based on risks for human health

    DEFF Research Database (Denmark)

    van der Fels-Klerx, H. J.; van Asselt, E. D.; Raley, M.

    2018-01-01

    This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science......, and the risk ranking method characterized. The methods were then clustered - based on their characteristics - into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years, multi......-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications. It was concluded there is no single best method for risk ranking...

  14. Standardised risk analysis as a communication tool

    International Nuclear Information System (INIS)

    Pluess, Ch.; Montanarini, M.; Bernauer, M.

    1998-01-01

    Full text of publication follows: several European countries require a risk analysis for the production, storage or transport a dangerous goods. This requirement imposes considerable administrative effort for some sectors of the industry. In order to minimize the effort of such studies, a generic risk analysis for an industrial sector proved to help. Standardised procedures can consequently be derived for efficient performance of the risk investigations. This procedure was successfully established in Switzerland for natural gas transmission lines and fossil fuel storage plants. The development process of the generic risk analysis involved an intense discussion between industry and authorities about methodology of assessment and the criteria of acceptance. This process finally led to scientific consistent modelling tools for risk analysis and to an improved communication from the industry to the authorities and the public. As a recent example, the Holland-Italy natural gas transmission pipeline is demonstrated, where this method was successfully employed. Although this pipeline traverses densely populated areas in Switzerland, using this established communication method, the risk problems could be solved without delaying the planning process. (authors)

  15. Recruitment Methods and Show Rates to a Prostate Cancer Early Detection Program for High-Risk Men: A Comprehensive Analysis

    Science.gov (United States)

    Giri, Veda N.; Coups, Elliot J.; Ruth, Karen; Goplerud, Julia; Raysor, Susan; Kim, Taylor Y.; Bagden, Loretta; Mastalski, Kathleen; Zakrzewski, Debra; Leimkuhler, Suzanne; Watkins-Bruner, Deborah

    2009-01-01

    Purpose Men with a family history (FH) of prostate cancer (PCA) and African American (AA) men are at higher risk for PCA. Recruitment and retention of these high-risk men into early detection programs has been challenging. We report a comprehensive analysis on recruitment methods, show rates, and participant factors from the Prostate Cancer Risk Assessment Program (PRAP), which is a prospective, longitudinal PCA screening study. Materials and Methods Men 35–69 years are eligible if they have a FH of PCA, are AA, or have a BRCA1/2 mutation. Recruitment methods were analyzed with respect to participant demographics and show to the first PRAP appointment using standard statistical methods Results Out of 707 men recruited, 64.9% showed to the initial PRAP appointment. More individuals were recruited via radio than from referral or other methods (χ2 = 298.13, p < .0001). Men recruited via radio were more likely to be AA (p<0.001), less educated (p=0.003), not married or partnered (p=0.007), and have no FH of PCA (p<0.001). Men recruited via referrals had higher incomes (p=0.007). Men recruited via referral were more likely to attend their initial PRAP visit than those recruited by radio or other methods (χ2 = 27.08, p < .0001). Conclusions This comprehensive analysis finds that radio leads to higher recruitment of AA men with lower socioeconomic status. However, these are the high-risk men that have lower show rates for PCA screening. Targeted motivational measures need to be studied to improve show rates for PCA risk assessment for these high-risk men. PMID:19758657

  16. Analysis of the LaSalle Unit 2 nuclear power plant: Risk Methods Integration and Evaluation Program (RMIEP)

    International Nuclear Information System (INIS)

    Wells, J.E.; Lappa, D.A.; Bernreuter, D.L.; Chen, J.C.; Chuang, T.Y.; Johnson, J.J.; Campbell, R.D.; Hashimoto, P.S.; Maslenikov, O.R.; Tiong, L.W.; Ravindra, M.K.; Kincaid, R.H.; Sues, R.H.; Putcha, C.S.

    1993-11-01

    This report describes the methodology used and the results obtained from the application of a simplified seismic risk methodology to the LaSalle County Nuclear Generating Station Unit 2. This study is part of the Level I analysis being performed by the Risk Methods Integration and Evaluation Program (RMIEP). Using the RMIEP developed event and fault trees, the analysis resulted in a seismically induced core damage frequency point estimate of 6.OE-7/yr. This result, combined with the component importance analysis, indicated that system failures were dominated by random events. The dominant components included diesel generator failures (failure to swing, failure to start, failure to run after started), and condensate storage tank

  17. Use of risk assessment methods for security design and analysis of nuclear and radioactive facilities

    International Nuclear Information System (INIS)

    Vasconcelos, Vanderley de; Andrade, Marcos C.; Jordao, Elizabete

    2011-01-01

    The objective of this work is to evaluate the applicability of risk assessment methods for analyzing the physical protection of nuclear and radioactive facilities. One of the important processes for physical protection in nuclear and radioactive facilities is the identifying of areas containing nuclear materials, structures, systems or components to be protected from sabotage, which could directly or indirectly lead to unacceptable radiological consequences. A survey of the international guidelines and recommendations about vital area identification, design basis threat (DBT), and the security of nuclear and radioactive facilities was carried out. The traditional methods used for quantitative risk assessment, like FMEA (Failure Mode and Effect Analysis), Event and Decision Trees, Fault and Success Trees, Vulnerability Assessment, Monte Carlo Simulation, Probabilistic Safety Assessment, Scenario Analysis, and Game Theory, among others, are highlighted. The applicability of such techniques to security issues, their pros and cons, the general resources needed to implement them, as data or support software, are analyzed. Finally, an approach to security design and analysis, beginning with a qualitative and preliminary examination to determine the range of possible scenarios, outcomes, and the systems to be included in the analyses, and proceeding to a progressively use of more quantitative techniques is presented. (author)

  18. Methods and models used in comparative risk studies

    International Nuclear Information System (INIS)

    Devooght, J.

    1983-01-01

    Comparative risk studies make use of a large number of methods and models based upon a set of assumptions incompletely formulated or of value judgements. Owing to the multidimensionality of risks and benefits, the economic and social context may notably influence the final result. Five classes of models are briefly reviewed: accounting of fluxes of effluents, radiation and energy; transport models and health effects; systems reliability and bayesian analysis; economic analysis of reliability and cost-risk-benefit analysis; decision theory in presence of uncertainty and multiple objectives. Purpose and prospect of comparative studies are assessed in view of probable diminishing returns for large generic comparisons [fr

  19. A Roadmap of Risk Diagnostic Methods: Developing an Integrated View of Risk Identification and Analysis Techniques

    National Research Council Canada - National Science Library

    Williams, Ray; Ambrose, Kate; Bentrem, Laura

    2004-01-01

    ...), which is envisioned to be a comprehensive reference tool for risk identification and analysis (RI AND A) techniques. Program Managers (PMs) responsible for developing or acquiring software-intensive systems typically identify risks in different ways...

  20. Risk analysis of a biomass combustion process using MOSAR and FMEA methods.

    Science.gov (United States)

    Thivel, P-X; Bultel, Y; Delpech, F

    2008-02-28

    Thermal and chemical conversion processes that convert in energy the sewage sludge, pasty waste and other pre-processed waste are increasingly common, for economic and ecological reasons. Fluidized bed combustion is currently one of the most promising methods of energy conversion, since it burns biomass very efficiently, and produces only very small quantities of sulphur and nitrogen oxides. The hazards associated with biomass combustion processes are fire, explosion and poisoning from the combustion gases (CO, etc.). The risk analysis presented in this paper uses the MADS-MOSAR methodology, applied to a semi-industrial pilot scheme comprising a fluidization column, a conventional cyclone, two natural gas burners and a continuous supply of biomass. The methodology uses a generic approach, with an initial macroscopic stage where hazard sources are identified, scenarios for undesired events are recognized and ranked using a grid of SeverityxProbability and safety barriers suggested. A microscopic stage then analyzes in detail the major risks identified during the first stage. This analysis may use various different tools, such as HAZOP, FMEA, etc.: our analysis is based on FMEA. Using MOSAR, we were able to identify five subsystems: the reactor (fluidized bed and centrifuge), the fuel and biomass supply lines, the operator and the environment. When we drew up scenarios based on these subsystems, we found that malfunction of the gas supply burners was a common trigger in many scenarios. Our subsequent microscopic analysis, therefore, focused on the burners, looking at the ways they failed, and at the effects and criticality of those failures (FMEA). We were, thus, able to identify a number of critical factors such as the incoming gas lines and the ignition electrode.

  1. Risk analysis of a biomass combustion process using MOSAR and FMEA methods

    International Nuclear Information System (INIS)

    Thivel, P.-X.; Bultel, Y.; Delpech, F.

    2008-01-01

    Thermal and chemical conversion processes that convert in energy the sewage sludge, pasty waste and other pre-processed waste are increasingly common, for economic and ecological reasons. Fluidized bed combustion is currently one of the most promising methods of energy conversion, since it burns biomass very efficiently, and produces only very small quantities of sulphur and nitrogen oxides. The hazards associated with biomass combustion processes are fire, explosion and poisoning from the combustion gases (CO, etc.). The risk analysis presented in this paper uses the MADS-MOSAR methodology, applied to a semi-industrial pilot scheme comprising a fluidization column, a conventional cyclone, two natural gas burners and a continuous supply of biomass. The methodology uses a generic approach, with an initial macroscopic stage where hazard sources are identified, scenarios for undesired events are recognized and ranked using a grid of Severity x Probability and safety barriers suggested. A microscopic stage then analyzes in detail the major risks identified during the first stage. This analysis may use various different tools, such as HAZOP, FMEA, etc.: our analysis is based on FMEA. Using MOSAR, we were able to identify five subsystems: the reactor (fluidized bed and centrifuge), the fuel and biomass supply lines, the operator and the environment. When we drew up scenarios based on these subsystems, we found that malfunction of the gas supply burners was a common trigger in many scenarios. Our subsequent microscopic analysis, therefore, focused on the burners, looking at the ways they failed, and at the effects and criticality of those failures (FMEA). We were, thus, able to identify a number of critical factors such as the incoming gas lines and the ignition electrode

  2. Transmission risk assessment of invasive fluke Fascioloides magna using GIS-modelling and multicriteria analysis methods

    Directory of Open Access Journals (Sweden)

    Juhásová L.

    2017-06-01

    Full Text Available The combination of multicriteria analysis (MCA, particularly analytic hierarchy process (AHP and geographic information system (GIS were applied for transmission risk assessment of Fascioloides magna (Trematoda; Fasciolidae in south-western Slovakia. Based on the details on F. magna life cycle, the following risk factors (RF of parasite transmission were determined: intermediate (RFIH and final hosts (RFFH (biological factors, annual precipitation (RFAP, land use (RFLU, flooded area (RFFA, and annual mean air temperature (RFAT (environmental factors. Two types of risk analyses were modelled: (1 potential risk analysis was focused on the determination of the potential risk of parasite transmission into novel territories (data on F. magna occurrence were excluded; (2 actual risk analysis considered also the summary data on F. magna occurrence in the model region (risk factor parasite occurrence RFPO included in the analysis. The results of the potential risk analysis provided novel distribution pattern and revealed new geographical area as the potential risk zone of F. magna occurrence. Although the actual risk analysis revealed all four risk zones of F. magna transmission (acceptable, moderate, undesirable and unacceptable, its outputs were significantly affected by the data on parasite occurrence what reduced the informative value of the actual transmission risk assessment.

  3. A method for scenario-based risk assessment for robust aerospace systems

    Science.gov (United States)

    Thomas, Victoria Katherine

    In years past, aircraft conceptual design centered around creating a feasible aircraft that could be built and could fly the required missions. More recently, aircraft viability entered into conceptual design, allowing that the product's potential to be profitable should also be examined early in the design process. While examining an aerospace system's feasibility and viability early in the design process is extremely important, it is also important to examine system risk. In traditional aerospace systems risk analysis, risk is examined from the perspective of performance, schedule, and cost. Recently, safety and reliability analysis have been brought forward in the design process to also be examined during late conceptual and early preliminary design. While these analyses work as designed, existing risk analysis methods and techniques are not designed to examine an aerospace system's external operating environment and the risks present there. A new method has been developed here to examine, during the early part of concept design, the risk associated with not meeting assumptions about the system's external operating environment. The risks are examined in five categories: employment, culture, government and politics, economics, and technology. The risks are examined over a long time-period, up to the system's entire life cycle. The method consists of eight steps over three focus areas. The first focus area is Problem Setup. During problem setup, the problem is defined and understood to the best of the decision maker's ability. There are four steps in this area, in the following order: Establish the Need, Scenario Development, Identify Solution Alternatives, and Uncertainty and Risk Identification. There is significant iteration between steps two through four. Focus area two is Modeling and Simulation. In this area the solution alternatives and risks are modeled, and a numerical value for risk is calculated. A risk mitigation model is also created. The four steps

  4. Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis

    Science.gov (United States)

    Dezfuli, Homayoon; Kelly, Dana; Smith, Curtis; Vedros, Kurt; Galyean, William

    2009-01-01

    This document, Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis, is intended to provide guidelines for the collection and evaluation of risk and reliability-related data. It is aimed at scientists and engineers familiar with risk and reliability methods and provides a hands-on approach to the investigation and application of a variety of risk and reliability data assessment methods, tools, and techniques. This document provides both: A broad perspective on data analysis collection and evaluation issues. A narrow focus on the methods to implement a comprehensive information repository. The topics addressed herein cover the fundamentals of how data and information are to be used in risk and reliability analysis models and their potential role in decision making. Understanding these topics is essential to attaining a risk informed decision making environment that is being sought by NASA requirements and procedures such as 8000.4 (Agency Risk Management Procedural Requirements), NPR 8705.05 (Probabilistic Risk Assessment Procedures for NASA Programs and Projects), and the System Safety requirements of NPR 8715.3 (NASA General Safety Program Requirements).

  5. Missing in space: an evaluation of imputation methods for missing data in spatial analysis of risk factors for type II diabetes.

    Science.gov (United States)

    Baker, Jannah; White, Nicole; Mengersen, Kerrie

    2014-11-20

    Spatial analysis is increasingly important for identifying modifiable geographic risk factors for disease. However, spatial health data from surveys are often incomplete, ranging from missing data for only a few variables, to missing data for many variables. For spatial analyses of health outcomes, selection of an appropriate imputation method is critical in order to produce the most accurate inferences. We present a cross-validation approach to select between three imputation methods for health survey data with correlated lifestyle covariates, using as a case study, type II diabetes mellitus (DM II) risk across 71 Queensland Local Government Areas (LGAs). We compare the accuracy of mean imputation to imputation using multivariate normal and conditional autoregressive prior distributions. Choice of imputation method depends upon the application and is not necessarily the most complex method. Mean imputation was selected as the most accurate method in this application. Selecting an appropriate imputation method for health survey data, after accounting for spatial correlation and correlation between covariates, allows more complete analysis of geographic risk factors for disease with more confidence in the results to inform public policy decision-making.

  6. Analysis and management of risks experienced in tunnel construction

    Directory of Open Access Journals (Sweden)

    Cagatay Pamukcu

    2015-12-01

    Full Text Available In this study, first of all, the definitions of "risk", "risk analysis", "risk assessment" and "risk management" were made to avoid any confusions about these terms and significance of risk analysis and management in engineering projects was emphasized. Then, both qualitative and quantitative risk analysis techniques were mentioned and within the scope of the study, Event Tree Analysis method was selected in order to analyze the risks regarding TBM (Tunnel Boring Machine operations in tunnel construction. After all hazards that would be encountered during tunnel construction by TBM method had been investigated, those hazards were undergoing a Preliminary Hazard Analysis to sort out and prioritize the risks with high scores. When the risk scores were taken into consideration, it was seen that the hazards with high risk scores could be classified into 4 groups which are excavation + support induced accidents, accidents stemming from geologic conditions, auxiliary works, and project contract. According to these four classified groups of initiating events, Event Tree Analysis was conducted by taking into care 4 countermeasures apart from each other. Finally, the quantitative and qualitative consequences of Event Tree Analyses, which were undertaken for all initiating events, were investigated and interpreted together by making comparisons and referring to previous studies.

  7. [Survival analysis with competing risks: estimating failure probability].

    Science.gov (United States)

    Llorca, Javier; Delgado-Rodríguez, Miguel

    2004-01-01

    To show the impact of competing risks of death on survival analysis. We provide an example of survival time without chronic rejection after heart transplantation, where death before rejection acts as a competing risk. Using a computer simulation, we compare the Kaplan-Meier estimator and the multiple decrement model. The Kaplan-Meier method overestimated the probability of rejection. Next, we illustrate the use of the multiple decrement model to analyze secondary end points (in our example: death after rejection). Finally, we discuss Kaplan-Meier assumptions and why they fail in the presence of competing risks. Survival analysis should be adjusted for competing risks of death to avoid overestimation of the risk of rejection produced with the Kaplan-Meier method.

  8. A two-stage method of quantitative flood risk analysis for reservoir real-time operation using ensemble-based hydrologic forecasts

    Science.gov (United States)

    Liu, P.

    2013-12-01

    Quantitative analysis of the risk for reservoir real-time operation is a hard task owing to the difficulty of accurate description of inflow uncertainties. The ensemble-based hydrologic forecasts directly depict the inflows not only the marginal distributions but also their persistence via scenarios. This motivates us to analyze the reservoir real-time operating risk with ensemble-based hydrologic forecasts as inputs. A method is developed by using the forecast horizon point to divide the future time into two stages, the forecast lead-time and the unpredicted time. The risk within the forecast lead-time is computed based on counting the failure number of forecast scenarios, and the risk in the unpredicted time is estimated using reservoir routing with the design floods and the reservoir water levels of forecast horizon point. As a result, a two-stage risk analysis method is set up to quantify the entire flood risks by defining the ratio of the number of scenarios that excessive the critical value to the total number of scenarios. The China's Three Gorges Reservoir (TGR) is selected as a case study, where the parameter and precipitation uncertainties are implemented to produce ensemble-based hydrologic forecasts. The Bayesian inference, Markov Chain Monte Carlo, is used to account for the parameter uncertainty. Two reservoir operation schemes, the real operated and scenario optimization, are evaluated for the flood risks and hydropower profits analysis. With the 2010 flood, it is found that the improvement of the hydrologic forecast accuracy is unnecessary to decrease the reservoir real-time operation risk, and most risks are from the forecast lead-time. It is therefore valuable to decrease the avarice of ensemble-based hydrologic forecasts with less bias for a reservoir operational purpose.

  9. Failure mode effect analysis and fault tree analysis as a combined methodology in risk management

    Science.gov (United States)

    Wessiani, N. A.; Yoshio, F.

    2018-04-01

    There have been many studies reported the implementation of Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) as a method in risk management. However, most of the studies usually only choose one of these two methods in their risk management methodology. On the other side, combining these two methods will reduce the drawbacks of each methods when implemented separately. This paper aims to combine the methodology of FMEA and FTA in assessing risk. A case study in the metal company will illustrate how this methodology can be implemented. In the case study, this combined methodology will assess the internal risks that occur in the production process. Further, those internal risks should be mitigated based on their level of risks.

  10. Advanced uncertainty modelling for container port risk analysis.

    Science.gov (United States)

    Alyami, Hani; Yang, Zaili; Riahi, Ramin; Bonsall, Stephen; Wang, Jin

    2016-08-13

    Globalization has led to a rapid increase of container movements in seaports. Risks in seaports need to be appropriately addressed to ensure economic wealth, operational efficiency, and personnel safety. As a result, the safety performance of a Container Terminal Operational System (CTOS) plays a growing role in improving the efficiency of international trade. This paper proposes a novel method to facilitate the application of Failure Mode and Effects Analysis (FMEA) in assessing the safety performance of CTOS. The new approach is developed through incorporating a Fuzzy Rule-Based Bayesian Network (FRBN) with Evidential Reasoning (ER) in a complementary manner. The former provides a realistic and flexible method to describe input failure information for risk estimates of individual hazardous events (HEs) at the bottom level of a risk analysis hierarchy. The latter is used to aggregate HEs safety estimates collectively, allowing dynamic risk-based decision support in CTOS from a systematic perspective. The novel feature of the proposed method, compared to those in traditional port risk analysis lies in a dynamic model capable of dealing with continually changing operational conditions in ports. More importantly, a new sensitivity analysis method is developed and carried out to rank the HEs by taking into account their specific risk estimations (locally) and their Risk Influence (RI) to a port's safety system (globally). Due to its generality, the new approach can be tailored for a wide range of applications in different safety and reliability engineering and management systems, particularly when real time risk ranking is required to measure, predict, and improve the associated system safety performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. The Use of Object-Oriented Analysis Methods in Surety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

    1999-05-01

    Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automatic model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.

  12. Integrated Risk-Capability Analysis under Deep Uncertainty : An ESDMA Approach

    NARCIS (Netherlands)

    Pruyt, E.; Kwakkel, J.H.

    2012-01-01

    Integrated risk-capability analysis methodologies for dealing with increasing degrees of complexity and deep uncertainty are urgently needed in an ever more complex and uncertain world. Although scenario approaches, risk assessment methods, and capability analysis methods are used, few organizations

  13. RISK ANALYSIS IN INFORMATION TECHNOLOGY AND COMMUNICATION OUTSOURCING

    Directory of Open Access Journals (Sweden)

    Edmir Parada Vasques Prado

    2011-12-01

    Full Text Available This research aims at evaluating the risk analysis process in Information Technology and Communication (ICT outsourcing conducted by organizations of the private sector. The research is characterized by being a descriptive, quantitative and transversal type study, which was used the survey method. Data were collected through questionnaire, the sample is not random and we used a convenience sampling process. The research made contributions to understanding the risk analysis process in ICT services outsourcing, and identified statistically significant relationships between risk analysis, organization's size and its industry, and between risk analysis and diversity of outsourced services

  14. Study Of The Risks Arising From Natural Disasters And Hazards On Urban And Intercity Motorways By Using Failure Mode Effect Analysis (FMEA) Methods

    Science.gov (United States)

    DELİCE, Yavuz

    2015-04-01

    Highways, Located in the city and intercity locations are generally prone to many kind of natural disaster risks. Natural hazards and disasters that may occur firstly from highway project making to construction and operation stages and later during the implementation of highway maintenance and repair stages have to be taken into consideration. And assessment of risks that may occur against adverse situations is very important in terms of project design, construction, operation maintenance and repair costs. Making hazard and natural disaster risk analysis is largely depending on the definition of the likelihood of the probable hazards on the highways. However, assets at risk , and the impacts of the events must be examined and to be rated in their own. With the realization of these activities, intended improvements against natural hazards and disasters will be made with the utilization of Failure Mode Effects Analysis (FMEA) method and their effects will be analyzed with further works. FMEA, is a useful method to identify the failure mode and effects depending on the type of failure rate effects priorities and finding the most optimum economic and effective solution. Although relevant measures being taken for the identified risks by this analysis method , it may also provide some information for some public institutions about the nature of these risks when required. Thus, the necessary measures will have been taken in advance in the city and intercity highways. Many hazards and natural disasters are taken into account in risk assessments. The most important of these dangers can be listed as follows; • Natural disasters 1. Meteorological based natural disasters (floods, severe storms, tropical storms, winter storms, avalanches, etc.). 2. Geological based natural disasters (earthquakes, tsunamis, landslides, subsidence, sinkholes, etc) • Human originated disasters 1. Transport accidents (traffic accidents), originating from the road surface defects (icing

  15. The Total Risk Analysis of Large Dams under Flood Hazards

    Directory of Open Access Journals (Sweden)

    Yu Chen

    2018-02-01

    Full Text Available Dams and reservoirs are useful systems in water conservancy projects; however, they also pose a high-risk potential for large downstream areas. Flood, as the driving force of dam overtopping, is the main cause of dam failure. Dam floods and their risks are of interest to researchers and managers. In hydraulic engineering, there is a growing tendency to evaluate dam flood risk based on statistical and probabilistic methods that are unsuitable for the situations with rare historical data or low flood probability, so a more reasonable dam flood risk analysis method with fewer application restrictions is needed. Therefore, different from previous studies, this study develops a flood risk analysis method for large dams based on the concept of total risk factor (TRF used initially in dam seismic risk analysis. The proposed method is not affected by the adequacy of historical data or the low probability of flood and is capable of analyzing the dam structure influence, the flood vulnerability of the dam site, and downstream risk as well as estimating the TRF of each dam and assigning corresponding risk classes to each dam. Application to large dams in the Dadu River Basin, Southwestern China, demonstrates that the proposed method provides quick risk estimation and comparison, which can help local management officials perform more detailed dam safety evaluations for useful risk management information.

  16. Risk management method for small photovoltaic plants

    Directory of Open Access Journals (Sweden)

    Kirova Milena

    2016-09-01

    Full Text Available Risk management is necessary for achieving the goals of the organization. There are many methods, approaches, and instruments in the literature concerning risk management. However, these are often highly specialized and transferring them to a different field can prove difficult. Therefore, managers often face situations where they have no tools to use for risk management. This is the case with small photovoltaic plants (according to a definition by the Bulgarian State Energy and Water Regulatory Commission small applies to systems with a total installed power of 200 kWp. There are some good practices in the energy field for minimizing risks, but they offer only partial risk prevention and are not sufficient. Therefore a new risk management method needs to be introduced. Small photovoltaic plants offer plenty of advantages in comparison to the other renewable energy sources which makes risk management in their case more important. There is no classification of risks for the exploitation of small photovoltaic systems in the available literature as well as to what degree the damages from those risks could spread. This makes risk analysis and evaluation necessary for obtaining information which could aid taking decisions for improving risk management. The owner of the invested capital takes a decision regarding the degree of acceptable risk for his organization and it must be protected depending on the goals set. Investors in small photovoltaic systems need to decide to what degree the existing risks can influence the goals previously set, the payback of the investment, and what is the acceptable level of damages for the investor. The purpose of this work is to present a risk management method, which currently does not exist in the Bulgaria, so that the risks and the damages that could occur during the exploitation of small photovoltaic plants could be identified and the investment in such technology – justified.

  17. Critical review of methods for risk ranking of food-related hazards, based on risks for human health.

    Science.gov (United States)

    Van der Fels-Klerx, H J; Van Asselt, E D; Raley, M; Poulsen, M; Korsgaard, H; Bredsdorff, L; Nauta, M; D'agostino, M; Coles, D; Marvin, H J P; Frewer, L J

    2018-01-22

    This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science and socio-economic sciences. The review used a predefined search protocol, and covered the bibliographic databases Scopus, CAB Abstracts, Web of Sciences, and PubMed over the period 1993-2013. All references deemed relevant, on the basis of predefined evaluation criteria, were included in the review, and the risk ranking method characterized. The methods were then clustered-based on their characteristics-into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years (HALY), multi-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications. It was concluded there is no single best method for risk ranking. The method to be used should be selected on the basis of risk manager/assessor requirements, data availability, and the characteristics of the method. Recommendations for future use and application are provided.

  18. Comprehensive safeguards evaluation methods and societal risk analysis

    International Nuclear Information System (INIS)

    Richardson, J.M.

    1982-03-01

    Essential capabilities of an integrated evaluation methodology for analyzing safeguards systems are discussed. Such a methodology must be conceptually meaningful, technically defensible, discriminating and consistent. A decompostion of safeguards systems by function is mentioned as a possible starting point for methodology development. The application of a societal risk equation to safeguards systems analysis is addressed. Conceptual problems with this approach are discussed. Technical difficulties in applying this equation to safeguards systems are illustrated through the use of confidence intervals, information content, hypothesis testing and ranking and selection procedures

  19. Multivariate survival analysis and competing risks

    CERN Document Server

    Crowder, Martin J

    2012-01-01

    Multivariate Survival Analysis and Competing Risks introduces univariate survival analysis and extends it to the multivariate case. It covers competing risks and counting processes and provides many real-world examples, exercises, and R code. The text discusses survival data, survival distributions, frailty models, parametric methods, multivariate data and distributions, copulas, continuous failure, parametric likelihood inference, and non- and semi-parametric methods. There are many books covering survival analysis, but very few that cover the multivariate case in any depth. Written for a graduate-level audience in statistics/biostatistics, this book includes practical exercises and R code for the examples. The author is renowned for his clear writing style, and this book continues that trend. It is an excellent reference for graduate students and researchers looking for grounding in this burgeoning field of research.

  20. Comparison of methods for prioritizing risk in radiation oncology

    International Nuclear Information System (INIS)

    Biazotto, Bruna; Tokarski, Marcio

    2016-01-01

    Proactive risk management tools, such as Failure Mode and Effect Analysis (FEMA), were imported from engineering and have been widely used in Radiation Oncology. An important step in this process is the risk prioritization and there are many methods to do that. This paper compares the risk prioritization of computerized planning phase in interstitial implants with high dose rate brachytherapy performed with Health Care Failure Mode and Effect Analysis (HFMEA) and FMEA with guidelines given by the Task Group 100 (TG 100) of the American Association of Physicists in Medicine. Out of the 33 possible failure modes of this process, 21 require more attention when evaluated by HFMEA and 22, when evaluated by FMEA TG 100. Despite the high coincidence between the methods, the execution of HFMEA was simpler. (author)

  1. Quantitative risk assessment using the capacity-demand analysis

    International Nuclear Information System (INIS)

    Morgenroth, M.; Donnelly, C.R.; Westermann, G.D.; Huang, J.H.S.; Lam, T.M.

    1999-01-01

    The hydroelectric industry's recognition of the importance of avoiding unexpected failure, or forced outages, led to the development of probabilistic, or risk-based, methods in order to attempt to quantify exposures. Traditionally, such analysis has been carried out by qualitative assessments, relying on experience and sound engineering judgment to determine the optimum time to maintain, repair or replace a part or system. Depending on the nature of the problem, however, and the level of experience of those included in the decision making process, it is difficult to find a balance between acting proactively and accepting some amount of risk. The development of a practical means for establishing the probability of failure of any part or system, based on the determination of the statistical distribution of engineering properties such as acting stresses, is discussed. The capacity-demand analysis methodology, coupled with probablistic, risk-based analysis, permits all the factors associated with a decision to rehabilitate or replace a part, including the risks associated with the timing of the decision, to be assessed in a transparent and defendable manner. The methodology does not eliminate judgment altogether, but does move it from the level of estimating the risk of failure to the lower level of estimating variability in material properties, uncertainty in loading, and the uncertainties inherent in any engineering analysis. The method was successfully used in 1998 to carry out a comprehensive, economic risk analysis for the entire water conveyance system of a 90 year old hydropower station. The analysis included a number of diverse parts ranging from rock slopes and aging steel and concrete conduits, and the method allowed a rational assessment of the risks associated with reach of these varied parts to be determined, permitting the essential remedial works to be prioritized. 14 refs., 4 figs

  2. Fuzzy Risk Evaluation in Failure Mode and Effects Analysis Using a D Numbers Based Multi-Sensor Information Fusion Method.

    Science.gov (United States)

    Deng, Xinyang; Jiang, Wen

    2017-09-12

    Failure mode and effect analysis (FMEA) is a useful tool to define, identify, and eliminate potential failures or errors so as to improve the reliability of systems, designs, and products. Risk evaluation is an important issue in FMEA to determine the risk priorities of failure modes. There are some shortcomings in the traditional risk priority number (RPN) approach for risk evaluation in FMEA, and fuzzy risk evaluation has become an important research direction that attracts increasing attention. In this paper, the fuzzy risk evaluation in FMEA is studied from a perspective of multi-sensor information fusion. By considering the non-exclusiveness between the evaluations of fuzzy linguistic variables to failure modes, a novel model called D numbers is used to model the non-exclusive fuzzy evaluations. A D numbers based multi-sensor information fusion method is proposed to establish a new model for fuzzy risk evaluation in FMEA. An illustrative example is provided and examined using the proposed model and other existing method to show the effectiveness of the proposed model.

  3. Applying quantitative benefit-risk analysis to aid regulatory decision making in diagnostic imaging: methods, challenges, and opportunities.

    Science.gov (United States)

    Agapova, Maria; Devine, Emily Beth; Bresnahan, Brian W; Higashi, Mitchell K; Garrison, Louis P

    2014-09-01

    Health agencies making regulatory marketing-authorization decisions use qualitative and quantitative approaches to assess expected benefits and expected risks associated with medical interventions. There is, however, no universal standard approach that regulatory agencies consistently use to conduct benefit-risk assessment (BRA) for pharmaceuticals or medical devices, including for imaging technologies. Economics, health services research, and health outcomes research use quantitative approaches to elicit preferences of stakeholders, identify priorities, and model health conditions and health intervention effects. Challenges to BRA in medical devices are outlined, highlighting additional barriers in radiology. Three quantitative methods--multi-criteria decision analysis, health outcomes modeling and stated-choice survey--are assessed using criteria that are important in balancing benefits and risks of medical devices and imaging technologies. To be useful in regulatory BRA, quantitative methods need to: aggregate multiple benefits and risks, incorporate qualitative considerations, account for uncertainty, and make clear whose preferences/priorities are being used. Each quantitative method performs differently across these criteria and little is known about how BRA estimates and conclusions vary by approach. While no specific quantitative method is likely to be the strongest in all of the important areas, quantitative methods may have a place in BRA of medical devices and radiology. Quantitative BRA approaches have been more widely applied in medicines, with fewer BRAs in devices. Despite substantial differences in characteristics of pharmaceuticals and devices, BRA methods may be as applicable to medical devices and imaging technologies as they are to pharmaceuticals. Further research to guide the development and selection of quantitative BRA methods for medical devices and imaging technologies is needed. Copyright © 2014 AUR. Published by Elsevier Inc. All rights

  4. System risk evolution analysis and risk critical event identification based on event sequence diagram

    International Nuclear Information System (INIS)

    Luo, Pengcheng; Hu, Yang

    2013-01-01

    During system operation, the environmental, operational and usage conditions are time-varying, which causes the fluctuations of the system state variables (SSVs). These fluctuations change the accidents’ probabilities and then result in the system risk evolution (SRE). This inherent relation makes it feasible to realize risk control by monitoring the SSVs in real time, herein, the quantitative analysis of SRE is essential. Besides, some events in the process of SRE are critical to system risk, because they act like the “demarcative points” of safety and accident, and this characteristic makes each of them a key point of risk control. Therefore, analysis of SRE and identification of risk critical events (RCEs) are remarkably meaningful to ensure the system to operate safely. In this context, an event sequence diagram (ESD) based method of SRE analysis and the related Monte Carlo solution are presented; RCE and risk sensitive variable (RSV) are defined, and the corresponding identification methods are also proposed. Finally, the proposed approaches are exemplified with an accident scenario of an aircraft getting into the icing region

  5. Risk-averse formulations and methods for a virtual power plant

    KAUST Repository

    Lima, Ricardo M.; Conejo, Antonio J.; Langodan, Sabique; Hoteit, Ibrahim; Knio, Omar M.

    2017-01-01

    In this paper we address the optimal operation of a virtual power plant using stochastic programming. We consider one risk-neutral and two risk-averse formulations that rely on the conditional value at risk. To handle large-scale problems, we implement two decomposition methods with variants using single- and multiple-cuts. We propose the utilization of wind ensembles obtained from the European Centre for Medium Range Weather Forecasts (ECMWF) to quantify the uncertainty of the wind forecast. We present detailed results relative to the computational performance of the risk-averse formulations, the decomposition methods, and risk management and sensitivities analysis as a function of the number of scenarios and risk parameters. The implementation of the two decomposition methods relies on the parallel solution of subproblems, which turns out to be paramount for computational efficiency. The results show that one of the two decomposition methods is the most efficient.

  6. Risk-averse formulations and methods for a virtual power plant

    KAUST Repository

    Lima, Ricardo M.

    2017-12-15

    In this paper we address the optimal operation of a virtual power plant using stochastic programming. We consider one risk-neutral and two risk-averse formulations that rely on the conditional value at risk. To handle large-scale problems, we implement two decomposition methods with variants using single- and multiple-cuts. We propose the utilization of wind ensembles obtained from the European Centre for Medium Range Weather Forecasts (ECMWF) to quantify the uncertainty of the wind forecast. We present detailed results relative to the computational performance of the risk-averse formulations, the decomposition methods, and risk management and sensitivities analysis as a function of the number of scenarios and risk parameters. The implementation of the two decomposition methods relies on the parallel solution of subproblems, which turns out to be paramount for computational efficiency. The results show that one of the two decomposition methods is the most efficient.

  7. DEVELOPMENT OF A RISK SCREENING METHOD FOR CREDITED OPERATOR ACTIONS

    International Nuclear Information System (INIS)

    HIGGINS, J.C.; O'HARA, J.M.; LEWIS, P.M.; PERSENSKY, J.; BONGARRA, J.

    2002-01-01

    DEVELOPMENT OF A RISK SCREENING METHOD FOR CREDITED OPERATOR ACTIONS. THE U.S. NUCLEAR REGULATORY COMMISSION (NRC) REVIEWS THE HUMAN FACTORS ASPECTS OF PROPOSED LICENSE AMENDMENTS THAT IMPACT HUMAN ACTIONS THAT ARE CREDITED IN A PLANTS SAFETY ANALYSIS. THE STAFF IS COMMITTED TO A GRADED APPROACH TO THESE REVIEWS THAT FOCUS RESOURCES ON THE MOST RISK IMPORTANT CHANGES. THEREFORE, A RISK INFORMED SCREENING METHOD WAS DEVELOPED BASED ON AN ADAPTATION OF EXISTING GUIDANCE FOR RISK INFORMED REGULATION AND HUMAN FACTORS. THE METHOD USES BOTH QUANTITATIVE AND QUALITATIVE INFORMATION TO DIVIDE THE AMENDMENT REQUESTS INTO DIFFERENT LEVELS OF REVIEW. THE METHOD WAS EVALUATED USING A VARIETY OF TESTS. THIS PAPER WILL SUMMARIZE THE DEVELOPMENT OF THE METHODOLOGY AND THE EVALUATIONS THAT WERE PERFORMED TO VERIFY ITS USEFULNESS

  8. Integrate life-cycle assessment and risk analysis results, not methods.

    Science.gov (United States)

    Linkov, Igor; Trump, Benjamin D; Wender, Ben A; Seager, Thomas P; Kennedy, Alan J; Keisler, Jeffrey M

    2017-08-04

    Two analytic perspectives on environmental assessment dominate environmental policy and decision-making: risk analysis (RA) and life-cycle assessment (LCA). RA focuses on management of a toxicological hazard in a specific exposure scenario, while LCA seeks a holistic estimation of impacts of thousands of substances across multiple media, including non-toxicological and non-chemically deleterious effects. While recommendations to integrate the two approaches have remained a consistent feature of environmental scholarship for at least 15 years, the current perception is that progress is slow largely because of practical obstacles, such as a lack of data, rather than insurmountable theoretical difficulties. Nonetheless, the emergence of nanotechnology presents a serious challenge to both perspectives. Because the pace of nanomaterial innovation far outstrips acquisition of environmentally relevant data, it is now clear that a further integration of RA and LCA based on dataset completion will remain futile. In fact, the two approaches are suited for different purposes and answer different questions. A more pragmatic approach to providing better guidance to decision-makers is to apply the two methods in parallel, integrating only after obtaining separate results.

  9. TU-FG-201-11: Evaluating the Validity of Prospective Risk Analysis Methods: A Comparison of Traditional FMEA and Modified Healthcare FMEA

    Energy Technology Data Exchange (ETDEWEB)

    Lah, J [Myongji Hospital, Goyang-si (Korea, Republic of); Manger, R; Kim, G [University of California, San Diego, La Jolla, CA (United States)

    2016-06-15

    Purpose: To examine the ability of traditional Failure mode and effects analysis (FMEA) and a light version of Healthcare FMEA (HFMEA), called Scenario analysis of FMEA (SAFER) by comparing their outputs in terms of the risks identified and their severity rankings. Methods: We applied two prospective methods of the quality management to surface image guided, linac-based radiosurgery (SIG-RS). For the traditional FMEA, decisions on how to improve an operation are based on risk priority number (RPN). RPN is a product of three indices: occurrence, severity and detectability. The SAFER approach; utilized two indices-frequency and severity-which were defined by a multidisciplinary team. A criticality matrix was divided into 4 categories; very low, low, high and very high. For high risk events, an additional evaluation was performed. Based upon the criticality of the process, it was decided if additional safety measures were needed and what they comprise. Results: Two methods were independently compared to determine if the results and rated risks were matching or not. Our results showed an agreement of 67% between FMEA and SAFER approaches for the 15 riskiest SIG-specific failure modes. The main differences between the two approaches were the distribution of the values and the failure modes (No.52, 54, 154) that have high SAFER scores do not necessarily have high FMEA RPN scores. In our results, there were additional risks identified by both methods with little correspondence. In the SAFER, when the risk score is determined, the basis of the established decision tree or the failure mode should be more investigated. Conclusion: The FMEA method takes into account the probability that an error passes without being detected. SAFER is inductive because it requires the identification of the consequences from causes, and semi-quantitative since it allow the prioritization of risks and mitigation measures, and thus is perfectly applicable to clinical parts of radiotherapy.

  10. TU-FG-201-11: Evaluating the Validity of Prospective Risk Analysis Methods: A Comparison of Traditional FMEA and Modified Healthcare FMEA

    International Nuclear Information System (INIS)

    Lah, J; Manger, R; Kim, G

    2016-01-01

    Purpose: To examine the ability of traditional Failure mode and effects analysis (FMEA) and a light version of Healthcare FMEA (HFMEA), called Scenario analysis of FMEA (SAFER) by comparing their outputs in terms of the risks identified and their severity rankings. Methods: We applied two prospective methods of the quality management to surface image guided, linac-based radiosurgery (SIG-RS). For the traditional FMEA, decisions on how to improve an operation are based on risk priority number (RPN). RPN is a product of three indices: occurrence, severity and detectability. The SAFER approach; utilized two indices-frequency and severity-which were defined by a multidisciplinary team. A criticality matrix was divided into 4 categories; very low, low, high and very high. For high risk events, an additional evaluation was performed. Based upon the criticality of the process, it was decided if additional safety measures were needed and what they comprise. Results: Two methods were independently compared to determine if the results and rated risks were matching or not. Our results showed an agreement of 67% between FMEA and SAFER approaches for the 15 riskiest SIG-specific failure modes. The main differences between the two approaches were the distribution of the values and the failure modes (No.52, 54, 154) that have high SAFER scores do not necessarily have high FMEA RPN scores. In our results, there were additional risks identified by both methods with little correspondence. In the SAFER, when the risk score is determined, the basis of the established decision tree or the failure mode should be more investigated. Conclusion: The FMEA method takes into account the probability that an error passes without being detected. SAFER is inductive because it requires the identification of the consequences from causes, and semi-quantitative since it allow the prioritization of risks and mitigation measures, and thus is perfectly applicable to clinical parts of radiotherapy.

  11. Methods for external event screening quantification: Risk Methods Integration and Evaluation Program (RMIEP) methods development

    International Nuclear Information System (INIS)

    Ravindra, M.K.; Banon, H.

    1992-07-01

    In this report, the scoping quantification procedures for external events in probabilistic risk assessments of nuclear power plants are described. External event analysis in a PRA has three important goals; (1) the analysis should be complete in that all events are considered; (2) by following some selected screening criteria, the more significant events are identified for detailed analysis; (3) the selected events are analyzed in depth by taking into account the unique features of the events: hazard, fragility of structures and equipment, external-event initiated accident sequences, etc. Based on the above goals, external event analysis may be considered as a three-stage process: Stage I: Identification and Initial Screening of External Events; Stage II: Bounding Analysis; Stage III: Detailed Risk Analysis. In the present report, first, a review of published PRAs is given to focus on the significance and treatment of external events in full-scope PRAs. Except for seismic, flooding, fire, and extreme wind events, the contributions of other external events to plant risk have been found to be negligible. Second, scoping methods for external events not covered in detail in the NRC's PRA Procedures Guide are provided. For this purpose, bounding analyses for transportation accidents, extreme winds and tornadoes, aircraft impacts, turbine missiles, and chemical release are described

  12. Multiple Sclerosis Increases Fracture Risk: A Meta-Analysis

    Directory of Open Access Journals (Sweden)

    Guixian Dong

    2015-01-01

    Full Text Available Purpose. The association between multiple sclerosis (MS and fracture risk has been reported, but results of previous studies remain controversial and ambiguous. To assess the association between MS and fracture risk, a meta-analysis was performed. Method. Based on comprehensive searches of the PubMed, Embase, and Web of Science, we identified outcome data from all articles estimating the association between MS and fracture risk. The pooled risk ratios (RRs with 95% confidence intervals (CIs were calculated. Results. A significant association between MS and fracture risk was found. This result remained statistically significant when the adjusted RRs were combined. Subgroup analysis stratified by the site of fracture suggested significant associations between MS and tibia fracture risk, femur fracture risk, hip fracture risk, pelvis fracture risk, vertebrae fracture risk, and humerus fracture risk. In the subgroup analysis by gender, female MS patients had increased fracture risk. When stratified by history of drug use, use of antidepressants, hypnotics/anxiolytics, anticonvulsants, and glucocorticoids increased the risk of fracture risk in MS patients. Conclusions. This meta-analysis demonstrated that MS was significantly associated with fracture risk.

  13. Instability risk analysis and risk assessment system establishment of underground storage caverns in bedded salt rock

    Science.gov (United States)

    Jing, Wenjun; Zhao, Yan

    2018-02-01

    Stability is an important part of geotechnical engineering research. The operating experiences of underground storage caverns in salt rock all around the world show that the stability of the caverns is the key problem of safe operation. Currently, the combination of theoretical analysis and numerical simulation are the mainly adopts method of reserve stability analysis. This paper introduces the concept of risk into the stability analysis of underground geotechnical structure, and studies the instability of underground storage cavern in salt rock from the perspective of risk analysis. Firstly, the definition and classification of cavern instability risk is proposed, and the damage mechanism is analyzed from the mechanical angle. Then the main stability evaluating indicators of cavern instability risk are proposed, and an evaluation method of cavern instability risk is put forward. Finally, the established cavern instability risk assessment system is applied to the analysis and prediction of cavern instability risk after 30 years of operation in a proposed storage cavern group in the Huai’an salt mine. This research can provide a useful theoretical base for the safe operation and management of underground storage caverns in salt rock.

  14. How to Perform an Ethical Risk Analysis (eRA).

    Science.gov (United States)

    Hansson, Sven Ove

    2018-02-26

    Ethical analysis is often needed in the preparation of policy decisions on risk. A three-step method is proposed for performing an ethical risk analysis (eRA). In the first step, the people concerned are identified and categorized in terms of the distinct but compatible roles of being risk-exposed, a beneficiary, or a decisionmaker. In the second step, a more detailed classification of roles and role combinations is performed, and ethically problematic role combinations are identified. In the third step, further ethical deliberation takes place, with an emphasis on individual risk-benefit weighing, distributional analysis, rights analysis, and power analysis. Ethical issues pertaining to subsidiary risk roles, such as those of experts and journalists, are also treated in this phase. An eRA should supplement, not replace, a traditional risk analysis that puts emphasis on the probabilities and severities of undesirable events but does not cover ethical issues such as agency, interpersonal relationships, and justice. © 2018 Society for Risk Analysis.

  15. Impact Analysis for Risks in Informatics Systems

    OpenAIRE

    Baicu, Floarea; Baches, Maria Alexandra

    2013-01-01

    In this paper are presented methods of impact analysis on informatics system security accidents, qualitative and quantitative methods, starting with risk and informational system security definitions. It is presented the relationship between the risks of exploiting vulnerabilities of security system, security level of these informatics systems, probability of exploiting the weak points subject to financial losses of a company, respectively impact of a security accident on the company. Herewit...

  16. Environmental risk assessment of low density polyethylene unit using the method of failure mode and effect analysis

    Directory of Open Access Journals (Sweden)

    Salati Parinaz

    2012-01-01

    Full Text Available The ninth olefin plan of Arya Sasol Petrochemical Company (A.S.P.C. is regarded the largest gas Olefin Unit located on Pars Special Economic Energy Zone (P.S.E.E.Z. Considering the importance of the petrochemical unit, its environmental assessment seems necessary to identify and reduce potential hazards. For this purpose, after determining the scope of the study area, identification and measurement of the environmental parameters, environmental risk assessment of the unit was carried out using Environment Failure Mode and Effect Analysis (EFMEA. Using the noted method, sources causing environmental risks were identified, rated and prioritized. Beside, the impacts of the environmental aspects derived from the unit activities as well as their consequences were also analyzed. Furthermore, the identified impacts were prioritized based on Risk Priority Number (RPN and severity level of the consequences imposed on the affected environment. After performing statistical calculations, it was found that the environmental aspects owing the risk priority number higher than 15 have a high level of risk. Results obtained from Low Density Polyethylene Unit revealed that the highest risk belongs to the emergency vent system with risk priority number equal to 48. It is occurred due to imperfect performance of the reactor safety system leading to the emissions of ethylene gas, particles, and radioactive steam as well as air and noise pollutions. Results derived from secondary assessment of the environmental aspects, through difference in calculated RPN and activities risk levels showed that employing modern methods and risk assessment are have remarkably reduced the severity of risk and consequently detracted the damages and losses incurred on the environment.

  17. Applications of probabilistic risk analysis in nuclear criticality safety design

    International Nuclear Information System (INIS)

    Chang, J.K.

    1992-01-01

    Many documents have been prepared that try to define the scope of the criticality analysis and that suggest adding probabilistic risk analysis (PRA) to the deterministic safety analysis. The report of the US Department of Energy (DOE) AL 5481.1B suggested that an accident is credible if the occurrence probability is >1 x 10 -6 /yr. The draft DOE 5480 safety analysis report suggested that safety analyses should include the application of methods such as deterministic safety analysis, risk assessment, reliability engineering, common-cause failure analysis, human reliability analysis, and human factor safety analysis techniques. The US Nuclear Regulatory Commission (NRC) report NRC SG830.110 suggested that major safety analysis methods should include but not be limited to risk assessment, reliability engineering, and human factor safety analysis. All of these suggestions have recommended including PRA in the traditional criticality analysis

  18. Risk-benefit analysis and public policy: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Clark, E.M.; Van Horn, A.J.

    1976-11-01

    Risk-benefit analysis has been implicitly practiced whenever decision-makers are confronted with decisions involving risks to life, health, or to the environment. Various methodologies have been developed to evaluate relevant criteria and to aid in assessing the impacts of alternative projects. Among these have been cost-benefit analysis, which has been widely used for project evaluation. However, in many cases it has been difficult to assign dollar costs to those criteria involving risks and benefits which are not now assigned explicit monetary values in our economic system. Hence, risk-benefit analysis has evolved to become more than merely an extension of cost-benefit analysis, and many methods have been applied to examine the trade-offs between risks and benefits. In addition, new scientific and statistical techniques have been developed for assessing current and future risks. The 950 references included in this bibliography are meant to suggest the breadth of those methodologies which have been applied to decisions involving risk.

  19. Risk-benefit analysis and public policy: a bibliography

    International Nuclear Information System (INIS)

    Clark, E.M.; Van Horn, A.J.

    1976-11-01

    Risk-benefit analysis has been implicitly practiced whenever decision-makers are confronted with decisions involving risks to life, health, or to the environment. Various methodologies have been developed to evaluate relevant criteria and to aid in assessing the impacts of alternative projects. Among these have been cost-benefit analysis, which has been widely used for project evaluation. However, in many cases it has been difficult to assign dollar costs to those criteria involving risks and benefits which are not now assigned explicit monetary values in our economic system. Hence, risk-benefit analysis has evolved to become more than merely an extension of cost-benefit analysis, and many methods have been applied to examine the trade-offs between risks and benefits. In addition, new scientific and statistical techniques have been developed for assessing current and future risks. The 950 references included in this bibliography are meant to suggest the breadth of those methodologies which have been applied to decisions involving risk

  20. Methodology for risk-based analysis of technical specifications

    International Nuclear Information System (INIS)

    Vesely, W.E.; Gaertner, J.P.; Wagner, D.P.

    1985-01-01

    Part of the effort by EPRI to apply probabilistic risk assessment methods and results to the solution of utility problems involves the investigation of methods for risk-based analysis of technical specifications. The culmination of this investigation is the SOCRATES computer code developed by Battelle's Columbus Laboratories to assist in the evaluation of technical specifications of nuclear power plants. The program is designed to use information found in PRAs to re-evaluate risk for changes in component allowed outage times (AOTs) and surveillance test intervals (STIs). The SOCRATES program is a unique and important tool for technical specification evaluations. The detailed component unavailability model allows a detailed analysis of AOT and STI contributions to risk. Explicit equations allow fast and inexpensive calculations. Because the code is designed to accept ranges of parameters and to save results of calculations that do not change during the analysis, sensitivity studies are efficiently performed and results are clearly displayed

  1. Probabilistic risk analysis in chemical engineering

    International Nuclear Information System (INIS)

    Schmalz, F.

    1991-01-01

    In risk analysis in the chemical industry, recognising potential risks is considered more important than assessing their quantitative extent. Even in assessing risks, emphasis is not on the probability involved but on the possible extent. Qualitative assessment has proved valuable here. Probabilistic methods are used in individual cases where the wide implications make it essential to be able to assess the reliability of safety precautions. In this case, assessment therefore centres on the reliability of technical systems and not on the extent of a chemical risk. 7 figs

  2. Kaplan-Meier Survival Analysis Overestimates the Risk of Revision Arthroplasty: A Meta-analysis.

    Science.gov (United States)

    Lacny, Sarah; Wilson, Todd; Clement, Fiona; Roberts, Derek J; Faris, Peter D; Ghali, William A; Marshall, Deborah A

    2015-11-01

    Although Kaplan-Meier survival analysis is commonly used to estimate the cumulative incidence of revision after joint arthroplasty, it theoretically overestimates the risk of revision in the presence of competing risks (such as death). Because the magnitude of overestimation is not well documented, the potential associated impact on clinical and policy decision-making remains unknown. We performed a meta-analysis to answer the following questions: (1) To what extent does the Kaplan-Meier method overestimate the cumulative incidence of revision after joint replacement compared with alternative competing-risks methods? (2) Is the extent of overestimation influenced by followup time or rate of competing risks? We searched Ovid MEDLINE, EMBASE, BIOSIS Previews, and Web of Science (1946, 1980, 1980, and 1899, respectively, to October 26, 2013) and included article bibliographies for studies comparing estimated cumulative incidence of revision after hip or knee arthroplasty obtained using both Kaplan-Meier and competing-risks methods. We excluded conference abstracts, unpublished studies, or studies using simulated data sets. Two reviewers independently extracted data and evaluated the quality of reporting of the included studies. Among 1160 abstracts identified, six studies were included in our meta-analysis. The principal reason for the steep attrition (1160 to six) was that the initial search was for studies in any clinical area that compared the cumulative incidence estimated using the Kaplan-Meier versus competing-risks methods for any event (not just the cumulative incidence of hip or knee revision); we did this to minimize the likelihood of missing any relevant studies. We calculated risk ratios (RRs) comparing the cumulative incidence estimated using the Kaplan-Meier method with the competing-risks method for each study and used DerSimonian and Laird random effects models to pool these RRs. Heterogeneity was explored using stratified meta-analyses and

  3. An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change

    Energy Technology Data Exchange (ETDEWEB)

    Hollnagel, Erik [MINES ParisTech Crisis and Risk Research Centre (CRC), Sophia Antipolis Cedex (France)

    2012-11-15

    The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering focuses on the common functions and processes that provide the basis for both successes and failures. Resilience engineering more precisely proposes that failures represent the flip side of the adaptations necessary to cope with the real world complexity rather than a failure of normal system functions and that a safety assessment therefore should focus on how functions are carried out rather than on how they may fail. The objective of this study was not to evaluate the current approach to risk assessment used by the organisation in question. The current approach has nevertheless been used as a frame of reference, but in a non-evaluative manner. The author has demonstrated through the selected case that FRAM can be used as an alternative approach to organizational changes. The report provides the reader with details to consider when making a decision on what analysis approach to use. The choice of which approach to use must reflect priorities and concerns of the organisation and the author makes no statement about which approach is better. It is clear that the choice of an analysis approach is not so simple to make and there are many things to take into account such as the larger working environment, organisational culture, regulatory requirements, etc.

  4. An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change

    International Nuclear Information System (INIS)

    Hollnagel, Erik

    2012-11-01

    The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering focuses on the common functions and processes that provide the basis for both successes and failures. Resilience engineering more precisely proposes that failures represent the flip side of the adaptations necessary to cope with the real world complexity rather than a failure of normal system functions and that a safety assessment therefore should focus on how functions are carried out rather than on how they may fail. The objective of this study was not to evaluate the current approach to risk assessment used by the organisation in question. The current approach has nevertheless been used as a frame of reference, but in a non-evaluative manner. The author has demonstrated through the selected case that FRAM can be used as an alternative approach to organizational changes. The report provides the reader with details to consider when making a decision on what analysis approach to use. The choice of which approach to use must reflect priorities and concerns of the organisation and the author makes no statement about which approach is better. It is clear that the choice of an analysis approach is not so simple to make and there are many things to take into account such as the larger working environment, organisational culture, regulatory requirements, etc

  5. Stress Analysis in Managing the Region’s Budget Risks

    Directory of Open Access Journals (Sweden)

    Natalya Pavlovna Pazdnikova

    2014-09-01

    Full Text Available The article addresses the implementation of budget risk management methods into the practices of governmental authorities. Drawing on the example of a particular region the article aims to demonstrate the possible methods of budget risk management. The authors refine the existing approaches to the notion of risk in its relation to budget system by introducing the notion of “budget risk.” Here the focus is the risk of default of budget spending in full which causes underfunding of territories and decrease in quality of life in the region. The authors have particularized the classification of budget risks and grouped together the criteria and factors which significantly influence the assessment and choice of method to manage budget risks. They hypothesize that budget risk is a financial risk. Therefore, the methods of financial risks management can be applied to budget risks management. The authors suggest a methodological approach to risk assessment based on correlation and regression analysis of program financing. The application of Kendall rank correlation coefficient allowed to assess the efficiency of budget spending on the implementation of state programs in Perm Krai. Two clusters — “Nature management and infrastructure” and “Public security” — turned out to be in the zone of high budget risk. The method of stress analysis, which consists in calculating Value at Risk (VaR, was applied to budget risks that in terms of probability are classified as critical. In order to assess risk as probability rate, the amount of Perm Krai deficit budget was calculated as induced variable from budget revenues and spending. The results demonstrate that contemporary management of public resources in the regions calls for the implementation of new management tools of higher quality and budget risk management is one of them.

  6. Maritime transportation risk analysis: Review and analysis in light of some foundational issues

    International Nuclear Information System (INIS)

    Goerlandt, Floris; Montewka, Jakub

    2015-01-01

    Many methods and applications for maritime transportation risk analysis have been presented in the literature. In parallel, there is a recent focus on foundational issues in risk analysis, with calls for intensified research on fundamental concepts and principles underlying the scientific field. This paper presents a review and analysis of risk definitions, perspectives and scientific approaches to risk analysis found in the maritime transportation application area, focusing on applications addressing accidental risk of shipping in a sea area. For this purpose, a classification of risk definitions, an overview of elements in risk perspectives and a classification of approaches to risk analysis science are applied. Results reveal that in the application area, risk is strongly tied to probability, both in definitions and perspectives, while alternative views exist. A diffuse situation is also found concerning the scientific approach to risk analysis, with realist, proceduralist and constructivist foundations co-existing. Realist approaches dominate the application area. Very few applications systematically account for uncertainty, neither concerning the evidence base nor in relation to the limitations of the risk model in relation to the space of possible outcomes. Some suggestions are made to improve the current situation, aiming to strengthen the scientific basis for risk analysis. - Highlights: • Risk analyses in maritime transportation analysed in light of foundational issues. • Focus on definitions, perspectives and scientific approaches to risk analysis. • Probability-based definitions and realist approaches dominate the field. • Findings support calls for increased focus on foundational issues in risk research. • Some suggestions are made to improve the current situation

  7. A Model of Risk Analysis in Analytical Methodology for Biopharmaceutical Quality Control.

    Science.gov (United States)

    Andrade, Cleyton Lage; Herrera, Miguel Angel De La O; Lemes, Elezer Monte Blanco

    2018-01-01

    One key quality control parameter for biopharmaceutical products is the analysis of residual cellular DNA. To determine small amounts of DNA (around 100 pg) that may be in a biologically derived drug substance, an analytical method should be sensitive, robust, reliable, and accurate. In principle, three techniques have the ability to measure residual cellular DNA: radioactive dot-blot, a type of hybridization; threshold analysis; and quantitative polymerase chain reaction. Quality risk management is a systematic process for evaluating, controlling, and reporting of risks that may affects method capabilities and supports a scientific and practical approach to decision making. This paper evaluates, by quality risk management, an alternative approach to assessing the performance risks associated with quality control methods used with biopharmaceuticals, using the tool hazard analysis and critical control points. This tool provides the possibility to find the steps in an analytical procedure with higher impact on method performance. By applying these principles to DNA analysis methods, we conclude that the radioactive dot-blot assay has the largest number of critical control points, followed by quantitative polymerase chain reaction, and threshold analysis. From the analysis of hazards (i.e., points of method failure) and the associated method procedure critical control points, we conclude that the analytical methodology with the lowest risk for performance failure for residual cellular DNA testing is quantitative polymerase chain reaction. LAY ABSTRACT: In order to mitigate the risk of adverse events by residual cellular DNA that is not completely cleared from downstream production processes, regulatory agencies have required the industry to guarantee a very low level of DNA in biologically derived pharmaceutical products. The technique historically used was radioactive blot hybridization. However, the technique is a challenging method to implement in a quality

  8. Foundations of Risk Analysis

    CERN Document Server

    Aven, Terje

    2012-01-01

    Foundations of Risk Analysis presents the issues core to risk analysis - understanding what risk means, expressing risk, building risk models, addressing uncertainty, and applying probability models to real problems. The author provides the readers with the knowledge and basic thinking they require to successfully manage risk and uncertainty to support decision making. This updated edition reflects recent developments on risk and uncertainty concepts, representations and treatment. New material in Foundations of Risk Analysis includes:An up to date presentation of how to understand, define and

  9. Towards risk-based structural integrity methods for PWRs

    International Nuclear Information System (INIS)

    Chapman, O.J.V.; Lloyd, R.B.

    1992-01-01

    This paper describes the development of risk-based structural integrity assurance methods and their application to Pressurized Water Reactor (PWR) plant. In-service inspection is introduced as a way of reducing the failure probability of high risk sites and the latter are identified using reliability analysis; the extent and interval of inspection can also be optimized. The methodology is illustrated by reference to the aspect of reliability of weldments in PWR systems. (author)

  10. Risk analysis methods: their importance for safety assessment of practices using radiation

    International Nuclear Information System (INIS)

    Dumenigo, C; Vilaragut, J.J.; Ferro, R.; Guillen, A.; Ramirez, M.L.; Ortiz Lopez, P.; Rodriguez, M.; McDonnell, J.D.; Papadopulos, S.; Pereira, P.P.; Goncalvez, M.; Morales, J.; Larrinaga, E.; Lopez Morones, R.; Sanchez, R.; Delgado, J.M.; Sanchez, C.; Somoano, F.

    2008-01-01

    Radiation safety has been based for many years on verification of compliance with regulatory requirements, codes of practice and international standards, which can be considered prescriptive methods. Accident analyses have been published, lessons have been learned and safety assessments have incorporated the need to check whether a facility is ready to avoid accidents similar to the reported ones. These approaches can be also called 'reactive methods'. They have in common the fundamental limitation of being restricted to reported experience, but do not take into account other potential events, which were never published or never happened, i.e. latent risks. Moreover, they focus on accident sequences with major consequences and low probability but may not pay enough attention to other sequences leading to lower, but still significant consequences with higher probability. More proactive approaches are, therefore, needed, to assess risk in radiation facilities. They aim at identifying all potential equipment faults and human error, which can lead to predefined unwanted consequences and are based on the general risk equation: Risk = Probability of occurrence of an accidental sequence * magnitude of the consequences. In this work, a review is given of the experience obtained by the countries of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, by applying proactive methods to radiotherapy practice. In particular, probabilistic safety assessment (PSA) used for external beam treatments with linear electron accelerators and two studies, on cobalt 60 therapy and brachytherapy using the risk-matrix approach are presented. The work has identified event sequences, their likelihood of occurrence, the consequences, the efficiency of interlocks and control checks and the global importance in terms of overall risk, to facilitate decision making and implementation of preventive measures. A comparison is presented of advantages and limitations of

  11. Computational Aspects of Dam Risk Analysis: Findings and Challenges

    Directory of Open Access Journals (Sweden)

    Ignacio Escuder-Bueno

    2016-09-01

    Full Text Available In recent years, risk analysis techniques have proved to be a useful tool to inform dam safety management. This paper summarizes the outcomes of three themes related to dam risk analysis discussed in the Benchmark Workshops organized by the International Commission on Large Dams Technical Committee on “Computational Aspects of Analysis and Design of Dams.” In the 2011 Benchmark Workshop, estimation of the probability of failure of a gravity dam for the sliding failure mode was discussed. Next, in 2013, the discussion focused on the computational challenges of the estimation of consequences in dam risk analysis. Finally, in 2015, the probability of sliding and overtopping in an embankment was analyzed. These Benchmark Workshops have allowed a complete review of numerical aspects for dam risk analysis, showing that risk analysis methods are a very useful tool to analyze the risk of dam systems, including downstream consequence assessments and the uncertainty of structural models.

  12. Risk Assessment of Total Coliform in X WTP’s Water Production Using Failure Mode And Effect Analysis Method

    Directory of Open Access Journals (Sweden)

    Bella Apriliani Amanda

    2017-07-01

    Full Text Available The greatest risk of drinking water supply is a failure to provide safe drinking water for communities. Based on IPA Kedunguling testing report on March 2016 noted that sample exceeding the quality standart of Peraturan Menteri Kesehatan RI No 492/2010 for the total coliform quality standart. The presence of total coliforms indicating water contamination by pathogen means the water is not safe to consume. The disinfection process has an importance rule in pathogen inactivation. Disinfectant performance is influenced by temperature, pH, turbidity, and the presence of organic materials. One way to control the quality of water produced by using a risk management approach Failure Modes and Effect Analysis (FMEA methods. The potential risks should be measured to determine causes of the problems and find the appropriate risk reduction. The risk assessment is using Risk Priority Number (RPN scale as a basis prioritization of remedial action on issues. Based on identification and risk analysis using FMEA known that the greatest risk of failure is the stipulation of chlorine dose and organic substances (category of high risk level; residual chlorine (category of moderate risk level; turbidity and pH (very low risk level category. Improvement proposal that can be done to reduce total coliforms presence in IPA Kedunguling is by increasing residual chlorine to 0.6 mg/l, set a daily chlorine level, controlling DBPs forming by lowering the concentration of organic precursor using granular activated carbon (GAC or aeration, by lowering the dose of disinfectant, set aside DBPs after the compound is formed using granular activated carbon (GAC, turbidity and pH monitoring, and regularly washing the filters

  13. Sensitivity Analysis of Launch Vehicle Debris Risk Model

    Science.gov (United States)

    Gee, Ken; Lawrence, Scott L.

    2010-01-01

    As part of an analysis of the loss of crew risk associated with an ascent abort system for a manned launch vehicle, a model was developed to predict the impact risk of the debris resulting from an explosion of the launch vehicle on the crew module. The model consisted of a debris catalog describing the number, size and imparted velocity of each piece of debris, a method to compute the trajectories of the debris and a method to calculate the impact risk given the abort trajectory of the crew module. The model provided a point estimate of the strike probability as a function of the debris catalog, the time of abort and the delay time between the abort and destruction of the launch vehicle. A study was conducted to determine the sensitivity of the strike probability to the various model input parameters and to develop a response surface model for use in the sensitivity analysis of the overall ascent abort risk model. The results of the sensitivity analysis and the response surface model are presented in this paper.

  14. WE-B-BRC-02: Risk Analysis and Incident Learning

    International Nuclear Information System (INIS)

    Fraass, B.

    2016-01-01

    Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

  15. WE-B-BRC-02: Risk Analysis and Incident Learning

    Energy Technology Data Exchange (ETDEWEB)

    Fraass, B. [Cedars Sinai Medical Center (United States)

    2016-06-15

    Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

  16. Cable Hot Shorts and Circuit Analysis in Fire Risk Assessment

    International Nuclear Information System (INIS)

    LaChance, Jeffrey; Nowlen, Steven P.; Wyant, Frank

    1999-01-01

    Under existing methods of probabilistic risk assessment (PRA), the analysis of fire-induced circuit faults has typically been conducted on a simplistic basis. In particular, those hot-short methodologies that have been applied remain controversial in regards to the scope of the assessments, the underlying methods, and the assumptions employed. To address weaknesses in fire PRA methodologies, the USNRC has initiated a fire risk analysis research program that includes a task for improving the tools for performing circuit analysis. The objective of this task is to obtain a better understanding of the mechanisms linking fire-induced cable damage to potentially risk-significant failure modes of power, control, and instrumentation cables. This paper discusses the current status of the circuit analysis task

  17. Handbook of methods for risk-based analyses of technical specifications

    International Nuclear Information System (INIS)

    Samanta, P.K.; Kim, I.S.; Mankamo, T.; Vesely, W.E.

    1994-12-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while a few may not be conducive to safety. The US Nuclear Regulatory Commission (USNRC) Office of Research has sponsored research to develop systematic risk-based methods to improve various aspects of TS requirements. This handbook summarizes these risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), scheduled or preventive maintenance, action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), and management of plant configurations resulting from outages of systems, or components. For each topic, the handbook summarizes analytic methods with data needs, outlines the insights to be gained, lists additional references, and gives examples of evaluations

  18. Handbook of methods for risk-based analyses of technical specifications

    Energy Technology Data Exchange (ETDEWEB)

    Samanta, P.K.; Kim, I.S. [Brookhaven National Lab., Upton, NY (United States); Mankamo, T. [Avaplan Oy, Espoo (Finland); Vesely, W.E. [Science Applications International Corp., Dublin, OH (United States)

    1994-12-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while a few may not be conducive to safety. The US Nuclear Regulatory Commission (USNRC) Office of Research has sponsored research to develop systematic risk-based methods to improve various aspects of TS requirements. This handbook summarizes these risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), scheduled or preventive maintenance, action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), and management of plant configurations resulting from outages of systems, or components. For each topic, the handbook summarizes analytic methods with data needs, outlines the insights to be gained, lists additional references, and gives examples of evaluations.

  19. Applying the partitioned multiobjective risk method (PMRM) to portfolio selection.

    Science.gov (United States)

    Reyes Santos, Joost; Haimes, Yacov Y

    2004-06-01

    The analysis of risk-return tradeoffs and their practical applications to portfolio analysis paved the way for Modern Portfolio Theory (MPT), which won Harry Markowitz a 1992 Nobel Prize in Economics. A typical approach in measuring a portfolio's expected return is based on the historical returns of the assets included in a portfolio. On the other hand, portfolio risk is usually measured using volatility, which is derived from the historical variance-covariance relationships among the portfolio assets. This article focuses on assessing portfolio risk, with emphasis on extreme risks. To date, volatility is a major measure of risk owing to its simplicity and validity for relatively small asset price fluctuations. Volatility is a justified measure for stable market performance, but it is weak in addressing portfolio risk under aberrant market fluctuations. Extreme market crashes such as that on October 19, 1987 ("Black Monday") and catastrophic events such as the terrorist attack of September 11, 2001 that led to a four-day suspension of trading on the New York Stock Exchange (NYSE) are a few examples where measuring risk via volatility can lead to inaccurate predictions. Thus, there is a need for a more robust metric of risk. By invoking the principles of the extreme-risk-analysis method through the partitioned multiobjective risk method (PMRM), this article contributes to the modeling of extreme risks in portfolio performance. A measure of an extreme portfolio risk, denoted by f(4), is defined as the conditional expectation for a lower-tail region of the distribution of the possible portfolio returns. This article presents a multiobjective problem formulation consisting of optimizing expected return and f(4), whose solution is determined using Evolver-a software that implements a genetic algorithm. Under business-as-usual market scenarios, the results of the proposed PMRM portfolio selection model are found to be compatible with those of the volatility-based model

  20. Dynamic risk analysis using bow-tie approach

    International Nuclear Information System (INIS)

    Khakzad, Nima; Khan, Faisal; Amyotte, Paul

    2012-01-01

    Accident probability estimation is a common and central step to all quantitative risk assessment methods. Among many techniques available, bow-tie model (BT) is very popular because it represent the accident scenario altogether including causes and consequences. However, it suffers a static structure limiting its application in real-time monitoring and probability updating which are key factors in dynamic risk analysis. The present work is focused on using BT approach in a dynamic environment in which the occurrence probability of accident consequences changes. In this method, on one hand, failure probability of primary events of BT, leading to the top event, are developed using physical reliability models, and constantly revised as physical parameters (e.g., pressure, velocity, dimension, etc) change. And, on the other hand, the failure probability of safety barriers of the BT are periodically updated using Bayes’ theorem as new information becomes available over time. Finally, the resulting, updated BT is used to estimate the posterior probability of the consequences which in turn results in an updated risk profile. - Highlights: ► A methodology is proposed to make bow-tie method adapted for dynamic risk analysis. ► Physical reliability models are used to revise the top event. ► Bayes’ theorem is used to update the probability of safety barriers. ► The number of accidents in sequential time intervals is used to form likelihood function. ► The risk profile is updated for varying physical parameters and for different times.

  1. Aspects of the risk analysis in the process engineering industry

    International Nuclear Information System (INIS)

    Hennings, W.; Madjar, M.; Mock, R.; Reer, B.

    1996-01-01

    This document is the result of a multi-discipline working group of a portion of a project called Risk analysis for chemical plants. Within the framework of the project, only selected methods and tools of risk analysis, thus, aspects of method, were able to be discussed and developed further. Case examples from the chemical industry are dealt with in order to discuss the application of a computer assisted quantitative error analysis in this industrial sector. Included is also a comprehensive documentation of the data and results utilised in the examples. figs., tabs., refs

  2. Key attributes of the SAPHIRE risk and reliability analysis software for risk-informed probabilistic applications

    International Nuclear Information System (INIS)

    Smith, Curtis; Knudsen, James; Kvarfordt, Kellie; Wood, Ted

    2008-01-01

    The Idaho National Laboratory is a primary developer of probabilistic risk and reliability analysis (PRRA) tools, dating back over 35 years. Evolving from mainframe-based software, the current state-of-the-practice has led to the creation of the SAPHIRE software. Currently, agencies such as the Nuclear Regulatory Commission, the National Aeronautics and Aerospace Agency, the Department of Energy, and the Department of Defense use version 7 of the SAPHIRE software for many of their risk-informed activities. In order to better understand and appreciate the power of software as part of risk-informed applications, we need to recall that our current analysis methods and solution methods have built upon pioneering work done 30-40 years ago. We contrast this work with the current capabilities in the SAPHIRE analysis package. As part of this discussion, we provide information for both the typical features and special analysis capabilities, which are available. We also present the application and results typically found with state-of-the-practice PRRA models. By providing both a high-level and detailed look at the SAPHIRE software, we give a snapshot in time for the current use of software tools in a risk-informed decision arena

  3. Comparison of two occurrence risk assessment methods for collapse gully erosion ——A case study in Guangdong province

    Science.gov (United States)

    Sun, K.; Cheng, D. B.; He, J. J.; Zhao, Y. L.

    2018-02-01

    Collapse gully erosion is a specific type of soil erosion in the red soil region of southern China, and early warning and prevention of the occurrence of collapse gully erosion is very important. Based on the idea of risk assessment, this research, taking Guangdong province as an example, adopt the information acquisition analysis and the logistic regression analysis, to discuss the feasibility for collapse gully erosion risk assessment in regional scale, and compare the applicability of the different risk assessment methods. The results show that in the Guangdong province, the risk degree of collapse gully erosion occurrence is high in northeastern and western area, and relatively low in southwestern and central part. The comparing analysis of the different risk assessment methods on collapse gully also indicated that the risk distribution patterns from the different methods were basically consistent. However, the accuracy of risk map from the information acquisition analysis method was slightly better than that from the logistic regression analysis method.

  4. Environmental modeling and health risk analysis (ACTS/RISK)

    National Research Council Canada - National Science Library

    Aral, M. M

    2010-01-01

    ... presents a review of the topics of exposure and health risk analysis. The Analytical Contaminant Transport Analysis System (ACTS) and Health RISK Analysis (RISK) software tools are an integral part of the book and provide computational platforms for all the models discussed herein. The most recent versions of these two softwa...

  5. Risk and safety analysis of nuclear systems

    National Research Council Canada - National Science Library

    Lee, John C; McCormick, Norman J

    2011-01-01

    .... The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used...

  6. Risk Analysis for Performance Improvement in a Romanian Pharmaceutical Company

    Directory of Open Access Journals (Sweden)

    Dana Corina Deselnicu

    2018-05-01

    Full Text Available The paper presents risk management analysis carried out to investigate the operations of a Romanian company dealing with the distribution of pharmaceutical products. The main risks challenging the company were identified, described and classified, providing a scientific base for further analysis. Then, the identified inherent risks were evaluated using tools as the risk index method and the risk matrix in order to emphasize their tolerance level. According to the results of the evaluation, risk mitigation strategies and measures were advanced for the management of the analysed risks. Relevant conclusions were drawn from the experience.

  7. The application of CFD to hydrogen risk analysis in nuclear power plants

    International Nuclear Information System (INIS)

    Wang Hui; Han Xu; Chang Meng; Wang Xiaofeng; Wang Shuguo; Lu Xinhua; Wu Lin

    2013-01-01

    Status of the hydrogen risk analysis method is systemically summarized in this paper and the advantages and limits of CFD (Computational Fluid Dynamic) in hydrogen risk analysis is discussed. The international experimental programs on the CFD hydrogen risk analysis are introduced in this paper. The application of CFD to nuclear power plant (NPP) hydrogen risk analysis is introduced in detail by taking EPR and Ling'ao NPP for example. In these bases, the CFD development prospect of hydrogen risk analysis is also summarized in this paper. (authors)

  8. Comprehensive risk assessment method of catastrophic accident based on complex network properties

    Science.gov (United States)

    Cui, Zhen; Pang, Jun; Shen, Xiaohong

    2017-09-01

    On the macro level, the structural properties of the network and the electrical characteristics of the micro components determine the risk of cascading failures. And the cascading failures, as a process with dynamic development, not only the direct risk but also potential risk should be considered. In this paper, comprehensively considered the direct risk and potential risk of failures based on uncertain risk analysis theory and connection number theory, quantified uncertain correlation by the node degree and node clustering coefficient, then established a comprehensive risk indicator of failure. The proposed method has been proved by simulation on the actual power grid. Modeling a network according to the actual power grid, and verified the rationality of the proposed method.

  9. Use of risk-matrix methods in the radiation safety analysis of PET/CT facilities

    International Nuclear Information System (INIS)

    Calderón Marín, Carlos F.; González González, Joaquín J.; Quesada Cepero, Waldo; Sinconegui Gómez, Belkys; Solá Rodríguez, Yeline; Duménigo Ámbar, Cruz; Guerrero Cancio, Mayka

    2016-01-01

    Introduction. Radiological safety is essential during clinical applications of ionizing radiations. Cuban legislation considers it mandatory to carry out risk analysis during safety assessments of facilities where Nuclear Medicine practices are performed. The Risk Matrix (R-M) method has been used in risk assessments in Radiotherapy and some experiences in Nuclear Medicine have been reported. In the present work the results of the safety evaluation, using the M-R method, of the first PET / CT center constructed at the Institute of Oncology and Radiobiology in Havana, are shown. The facilities will work as a satellite center and the production of radioactive drugs of 68 Ga will be conceived. The images will be acquired with a Philips Gemini TF64 scanner. Several stages and sub-stages were considered, including the design of the facility, quality control programs, review of the relevance of study requests, radiopharmaceutical reception and fractionation, 68 Ga radiopharmaceuticals production, management of Patient during the administration of radiopharmaceuticals and patient positioning. Initiating events (IEs), available barriers, as well as measures for the reduction of frequency (RFMs) of IEs and consequences (RCMs) were identified. In addition, IEs sequences are considered for CT scans. The incidence of risk reduction was assessed by the ratio of the number of times they were used and the total number of IEs. The calculation of the R-M was made by modeling the practice with the SEVRRA code R iskAssessmentSystem . Results. As a result, 76 IEs were identified with a distribution of 72% affecting patients, 7.9% in the Public and 19.7% on Occupationally Exposed Workers (TOEs). 89.5% of IEs are caused by human errors. Barriers and consequences and frequency reducers produced a risk distribution of 2.6% of high risk IEs, 64.5% medium risk and 32.9% low risk. The high-risk IEs are related to errors in the calculation of the shielding requirements of the facility that

  10. The watchdog role of risk analysis

    International Nuclear Information System (INIS)

    Reijen, G. van; Vinck, W.

    1983-01-01

    The reason why the risks of large-scale technology attract more attention lies in the fact that accidents would have more disastrous results and in the fact that it is probably more attractive to study the risks of some large projects than to do the same for a greater number of smaller projects. Within this presentation there will be some opening remarks on the Role of the Commission of the European Community with regard to accident prevention. The development of the concept of quantitative risks is dealt with. This development leads to a combinded of deterministic and probabilistic methods. The presentation concludes with some critical remarks on quantitative risk analysis and its use. (orig./HP) [de

  11. CONSIDERATIONS ON APPLYING THE ANALYSIS MATRIX METHODS OF THE RISKS WITHIN THE AUDIT OF THE PROCUREMENT-PAYMENT CYCLE

    Directory of Open Access Journals (Sweden)

    Svetlana SLOBODEANU

    2014-07-01

    Full Text Available In the article hereby we analyse the matrix method of analysis of the risks for fraud and error at the level of the procurement-payments cycle. The risk of presentation of certain fraudulent information regarding the accounts of the procurement-payments cycle becomes more and more accentuated in the enhancement of the administration’s wish to present financial indicators of performance. In these conditions, the auditor is to necessarily quantify the involvement of this phenomenon for the report of audit. As a consequence, the auditor is to evaluate the risk for fraud and apply additional audit procedures for identifying all the possible indicators for „remaking” the financial situations on the side of the accounts of suppliers, activity, as a last consequence of which may be a qualified opinion on audit.

  12. ProRisk : risk analysis instrument : developed for William properties

    NARCIS (Netherlands)

    van Doorn, W.H.W.; Egeberg, Ingrid; Hendrickx, Kristoff; Kahramaner, Y.; Masseur, B.; Waijers, Koen; Weglicka, K.A.

    2005-01-01

    This report presents a Risk Analysis Instrument developed for William Properties. Based on the analysis, it appears that the practice of Risk Analysis exists within the organization, yet rather implicit. The Risk Analysis Instrument comes with a package of four components: an activity diagram, a

  13. Quantitative risk analysis of a space shuttle subsystem

    International Nuclear Information System (INIS)

    Frank, M.V.

    1989-01-01

    This paper reports that in an attempt to investigate methods for risk management other than qualitative analysis techniques, NASA has funded pilot study quantitative risk analyses for space shuttle subsystems. The authors performed one such study of two shuttle subsystems with McDonnell Douglas Astronautics Company. The subsystems were the auxiliary power units (APU) on the orbiter, and the hydraulic power units on the solid rocket booster. The technology and results of the APU study are presented in this paper. Drawing from a rich in-flight database as well as from a wealth of tests and analyses, the study quantitatively assessed the risk of APU-initiated scenarios on the shuttle during all phases of a flight mission. Damage states of interest were loss of crew/vehicle, aborted mission, and launch scrub. A quantitative risk analysis approach to deciding on important items for risk management was contrasted with the current NASA failure mode and effects analysis/critical item list approach

  14. Observations on risk analysis

    International Nuclear Information System (INIS)

    Thompson, W.A. Jr.

    1979-11-01

    This paper briefly describes WASH 1400 and the Lewis report. It attempts to define basic concepts such as risk and risk analysis, common mode failure, and rare event. Several probabilistic models which go beyond the WASH 1400 methodology are introduced; the common characteristic of these models is that they recognize explicitly that risk analysis is time dependent whereas WASH 1400 takes a per demand failure rate approach which obscures the important fact that accidents are time related. Further, the presentation of a realistic risk analysis should recognize that there are various risks which compete with one another for the lives of the individuals at risk. A way of doing this is suggested

  15. Integrating Household Risk Mitigation Behavior in Flood Risk Analysis: An Agent-Based Model Approach.

    Science.gov (United States)

    Haer, Toon; Botzen, W J Wouter; de Moel, Hans; Aerts, Jeroen C J H

    2017-10-01

    Recent studies showed that climate change and socioeconomic trends are expected to increase flood risks in many regions. However, in these studies, human behavior is commonly assumed to be constant, which neglects interaction and feedback loops between human and environmental systems. This neglect of human adaptation leads to a misrepresentation of flood risk. This article presents an agent-based model that incorporates human decision making in flood risk analysis. In particular, household investments in loss-reducing measures are examined under three economic decision models: (1) expected utility theory, which is the traditional economic model of rational agents; (2) prospect theory, which takes account of bounded rationality; and (3) a prospect theory model, which accounts for changing risk perceptions and social interactions through a process of Bayesian updating. We show that neglecting human behavior in flood risk assessment studies can result in a considerable misestimation of future flood risk, which is in our case study an overestimation of a factor two. Furthermore, we show how behavior models can support flood risk analysis under different behavioral assumptions, illustrating the need to include the dynamic adaptive human behavior of, for instance, households, insurers, and governments. The method presented here provides a solid basis for exploring human behavior and the resulting flood risk with respect to low-probability/high-impact risks. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  16. A new tool for risk analysis and assessment in petrochemical plants

    Directory of Open Access Journals (Sweden)

    El-Arkam Mechhoud

    2016-09-01

    Full Text Available The aim of our work was the implementation of a new automated tool dedicated to risk analysis and assessment in petrochemical plants, based on a combination of two analysis methods: HAZOP (HAZard and OPerability and FMEA (Failure Mode and Effect Analysis. Assessment of accident scenarios is also considered. The principal advantage of the two analysis methods is to speed-up hazard identification and risk assessment and forecast the nature and impact of such accidents. Plant parameters are analyzed under a graphical interface to facilitate the exploitation of our developed approach. This automated analysis brings out the different deviations of the operating parameters of any system in the plant. Possible causes of these deviations, their consequences and preventive actions are identified. The result is risk minimization and dependability enhancement of the considered system.

  17. Implementing the Bayesian paradigm in risk analysis

    International Nuclear Information System (INIS)

    Aven, T.; Kvaloey, J.T.

    2002-01-01

    The Bayesian paradigm comprises a unified and consistent framework for analyzing and expressing risk. Yet, we see rather few examples of applications where the full Bayesian setting has been adopted with specifications of priors of unknown parameters. In this paper, we discuss some of the practical challenges of implementing Bayesian thinking and methods in risk analysis, emphasizing the introduction of probability models and parameters and associated uncertainty assessments. We conclude that there is a need for a pragmatic view in order to 'successfully' apply the Bayesian approach, such that we can do the assignments of some of the probabilities without adopting the somewhat sophisticated procedure of specifying prior distributions of parameters. A simple risk analysis example is presented to illustrate ideas

  18. Analysis of parameter uncertainties in the assessment of seismic risk for nuclear power plants

    International Nuclear Information System (INIS)

    Yucemen, S.M.

    1981-04-01

    Probabilistic and statistical methods are used to develop a procedure by which the seismic risk at a specific site can be systematically analyzed. The proposed probabilistic procedure provides a consisted method for the modelling, analysis and updating of uncertainties that are involved in the seismic risk analysis for nuclear power plants. Methods are proposed for including these uncertainties in the final value of calculated risks. Two specific case studies are presented in detail to illustrate the application of the probabilistic method of seismic risk evaluation and to investigate the sensitivity of results to different assumptions

  19. Developing strategies to reduce the risk of hazardous materials transportation in iran using the method of fuzzy SWOT analysis

    Directory of Open Access Journals (Sweden)

    A. S. Kheirkhah

    2009-12-01

    Full Text Available An increase in hazardous materials transportation in Iran along with the industrial development and increase of resulted deadly accidents necessitate the development and implementation of some strategies to reduce these incidents. SWOT analysis is an efficient method for developing strategies, however, its structural problems, including a lack of prioritizing internal and external factors and inability to consider two sided factors reducing its performance in the situations where the number of internal and external factors affecting the risk of hazardous materials is relatively high and some factors are two sided in nature are presented in the article. Fuzzy SWOT analysis is a method the use of which helps with solving these problems and is the issue of employing an effective methodology. Also, the article compares the resulted strategies of the fuzzy method with the strategies developed following SWOT in order to show the relative supremacy of the new method.

  20. Risk analysis within environmental impact assessment of proposed construction activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-15

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  1. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  2. SWOT ANALYSIS ON SAMPLING METHOD

    Directory of Open Access Journals (Sweden)

    CHIS ANCA OANA

    2014-07-01

    Full Text Available Audit sampling involves the application of audit procedures to less than 100% of items within an account balance or class of transactions. Our article aims to study audit sampling in audit of financial statements. As an audit technique largely used, in both its statistical and nonstatistical form, the method is very important for auditors. It should be applied correctly for a fair view of financial statements, to satisfy the needs of all financial users. In order to be applied correctly the method must be understood by all its users and mainly by auditors. Otherwise the risk of not applying it correctly would cause loose of reputation and discredit, litigations and even prison. Since there is not a unitary practice and methodology for applying the technique, the risk of incorrectly applying it is pretty high. The SWOT analysis is a technique used that shows the advantages, disadvantages, threats and opportunities. We applied SWOT analysis in studying the sampling method, from the perspective of three players: the audit company, the audited entity and users of financial statements. The study shows that by applying the sampling method the audit company and the audited entity both save time, effort and money. The disadvantages of the method are difficulty in applying and understanding its insight. Being largely used as an audit method and being a factor of a correct audit opinion, the sampling method’s advantages, disadvantages, threats and opportunities must be understood by auditors.

  3. New algorithm for risk analysis in radiotherapy

    International Nuclear Information System (INIS)

    Torres, Antonio; Montes de Oca, Joe

    2015-01-01

    Risk analyses applied to radiotherapy treatments have become an undeniable necessity, considering the dangers generated by the combination of using powerful radiation fields on patients and the occurrence of human errors and equipment failures during these treatments. The technique par excellence to execute these analyses has been the risk matrix. This paper presents the development of a new algorithm to execute the task with wide graphic and analytic potentialities, thus transforming it into a very useful option for risk monitoring and the optimization of quality assurance. The system SECURE- MR, which is the basic software of this algorithm, has been successfully used in risk analysis regarding different kinds of radiotherapies. Compared to previous methods, It offers new possibilities of analysis considering risk controlling factors as the robustness of reducers of initiators frequency and its consequences. Their analytic capacities and graphs allow novel developments to classify risk contributing factors, to represent information processes as well as accidental sequences. The paper shows the application of the proposed system to a generic process of radiotherapy treatment using a lineal accelerator. (author)

  4. An integrated probabilistic risk analysis decision support methodology for systems with multiple state variables

    International Nuclear Information System (INIS)

    Sen, P.; Tan, John K.G.; Spencer, David

    1999-01-01

    Probabilistic risk analysis (PRA) methods have been proven to be valuable in risk and reliability analysis. However, a weak link seems to exist between methods for analysing risks and those for making rational decisions. The integrated decision support system (IDSS) methodology presented in this paper attempts to address this issue in a practical manner. In consists of three phases: a PRA phase, a risk sensitivity analysis (SA) phase and an optimisation phase, which are implemented through an integrated computer software system. In the risk analysis phase the problem is analysed by the Boolean representation method (BRM), a PRA method that can deal with systems with multiple state variables and feedback loops. In the second phase the results obtained from the BRM are utilised directly to perform importance and risk SA. In the third phase, the problem is formulated as a multiple objective decision making problem in the form of multiple objective reliability optimisation. An industrial example is included. The resultant solutions of a five objective reliability optimisation are presented, on the basis of which rational decision making can be explored

  5. Research on the method of information system risk state estimation based on clustering particle filter

    Directory of Open Access Journals (Sweden)

    Cui Jia

    2017-05-01

    Full Text Available With the purpose of reinforcing correlation analysis of risk assessment threat factors, a dynamic assessment method of safety risks based on particle filtering is proposed, which takes threat analysis as the core. Based on the risk assessment standards, the method selects threat indicates, applies a particle filtering algorithm to calculate influencing weight of threat indications, and confirms information system risk levels by combining with state estimation theory. In order to improve the calculating efficiency of the particle filtering algorithm, the k-means cluster algorithm is introduced to the particle filtering algorithm. By clustering all particles, the author regards centroid as the representative to operate, so as to reduce calculated amount. The empirical experience indicates that the method can embody the relation of mutual dependence and influence in risk elements reasonably. Under the circumstance of limited information, it provides the scientific basis on fabricating a risk management control strategy.

  6. Research on the method of information system risk state estimation based on clustering particle filter

    Science.gov (United States)

    Cui, Jia; Hong, Bei; Jiang, Xuepeng; Chen, Qinghua

    2017-05-01

    With the purpose of reinforcing correlation analysis of risk assessment threat factors, a dynamic assessment method of safety risks based on particle filtering is proposed, which takes threat analysis as the core. Based on the risk assessment standards, the method selects threat indicates, applies a particle filtering algorithm to calculate influencing weight of threat indications, and confirms information system risk levels by combining with state estimation theory. In order to improve the calculating efficiency of the particle filtering algorithm, the k-means cluster algorithm is introduced to the particle filtering algorithm. By clustering all particles, the author regards centroid as the representative to operate, so as to reduce calculated amount. The empirical experience indicates that the method can embody the relation of mutual dependence and influence in risk elements reasonably. Under the circumstance of limited information, it provides the scientific basis on fabricating a risk management control strategy.

  7. Vulnerabilities, Influences and Interaction Paths: Failure Data for Integrated System Risk Analysis

    Science.gov (United States)

    Malin, Jane T.; Fleming, Land

    2006-01-01

    We describe graph-based analysis methods for identifying and analyzing cross-subsystem interaction risks from subsystem connectivity information. By discovering external and remote influences that would be otherwise unexpected, these methods can support better communication among subsystem designers at points of potential conflict and to support design of more dependable and diagnosable systems. These methods identify hazard causes that can impact vulnerable functions or entities if propagated across interaction paths from the hazard source to the vulnerable target. The analysis can also assess combined impacts of And-Or trees of disabling influences. The analysis can use ratings of hazards and vulnerabilities to calculate cumulative measures of the severity and importance. Identification of cross-subsystem hazard-vulnerability pairs and propagation paths across subsystems will increase coverage of hazard and risk analysis and can indicate risk control and protection strategies.

  8. Tutorial: Parallel Computing of Simulation Models for Risk Analysis.

    Science.gov (United States)

    Reilly, Allison C; Staid, Andrea; Gao, Michael; Guikema, Seth D

    2016-10-01

    Simulation models are widely used in risk analysis to study the effects of uncertainties on outcomes of interest in complex problems. Often, these models are computationally complex and time consuming to run. This latter point may be at odds with time-sensitive evaluations or may limit the number of parameters that are considered. In this article, we give an introductory tutorial focused on parallelizing simulation code to better leverage modern computing hardware, enabling risk analysts to better utilize simulation-based methods for quantifying uncertainty in practice. This article is aimed primarily at risk analysts who use simulation methods but do not yet utilize parallelization to decrease the computational burden of these models. The discussion is focused on conceptual aspects of embarrassingly parallel computer code and software considerations. Two complementary examples are shown using the languages MATLAB and R. A brief discussion of hardware considerations is located in the Appendix. © 2016 Society for Risk Analysis.

  9. Approaches and methods of risk assessment

    International Nuclear Information System (INIS)

    Rowe, W.D.

    1983-01-01

    The classification system of risk assessment includes the categories: 1) risk comparisons, 2) cost-effectiveness of risk reduction, 3) balancing of costs, risks and benefits against one another, 4. Metasystems. An overview of methods and systems reveals that no single method can be applied to all cases and situations. The visibility of the process and the absolute consideration of all aspects of judging are, however, of first and fore most importance. (DG) [de

  10. Reinterpretation of the results of a pooled analysis of dietary carotenoid intake and breast cancer risk by using the interval collapsing method

    Directory of Open Access Journals (Sweden)

    Jong-Myon Bae

    2016-06-01

    Full Text Available OBJECTIVES: A pooled analysis of 18 prospective cohort studies reported in 2012 for evaluating carotenoid intakes and breast cancer risk defined by estrogen receptor (ER and progesterone receptor (PR statuses by using the “highest versus lowest intake” method (HLM. By applying the interval collapsing method (ICM to maximize the use of the estimated information, we reevaluated the results of the previous analysis in order to reinterpret the inferences made. METHODS: In order to estimate the summary effect size (sES and its 95% confidence interval (CI, meta-analyses with the random-effects model were conducted for adjusted relative risks and their 95% CI from the second to the fifth interval according to five kinds of carotenoids and ER/PR status. RESULTS: The following new findings were identified: α-Carotene and β-cryptoxanthin have protective effects on overall breast cancer. All five kinds of carotenoids showed protective effects on ER− breast cancer. β-Carotene level increased the risk of ER+ or ER+/PR+ breast cancer. α-Carotene, β-carotene, lutein/zeaxanthin, and lycopene showed a protective effect on ER−/PR+ or ER−/PR− breast cancer. CONCLUSIONS: The new facts support the hypothesis that carotenoids that show anticancer effects with anti-oxygen function might reduce the risk of ER− breast cancer. Based on the new facts, the modification of the effects of α-carotene, β-carotene, and β-cryptoxanthin should be evaluated according to PR and ER statuses.

  11. Pressure Systems Stored-Energy Threshold Risk Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Paulsen, Samuel S.

    2009-08-25

    Federal Regulation 10 CFR 851, which became effective February 2007, brought to light potential weaknesses regarding the Pressure Safety Program at the Pacific Northwest National Laboratory (PNNL). The definition of a pressure system in 10 CFR 851 does not contain a limit based upon pressure or any other criteria. Therefore, the need for a method to determine an appropriate risk-based hazard level for pressure safety was identified. The Laboratory has historically used a stored energy of 1000 lbf-ft to define a pressure hazard; however, an analytical basis for this value had not been documented. This document establishes the technical basis by evaluating the use of stored energy as an appropriate criterion to establish a pressure hazard, exploring a suitable risk threshold for pressure hazards, and reviewing the methods used to determine stored energy. The literature review and technical analysis concludes the use of stored energy as a method for determining a potential risk, the 1000 lbf-ft threshold, and the methods used by PNNL to calculate stored energy are all appropriate. Recommendations for further program improvements are also discussed

  12. RAMS (Risk Analysis - Modular System) methodology

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, R.D.; Strenge, D.L.; Buck, J.W. [and others

    1996-10-01

    The Risk Analysis - Modular System (RAMS) was developed to serve as a broad scope risk analysis tool for the Risk Assessment of the Hanford Mission (RAHM) studies. The RAHM element provides risk analysis support for Hanford Strategic Analysis and Mission Planning activities. The RAHM also provides risk analysis support for the Hanford 10-Year Plan development activities. The RAMS tool draws from a collection of specifically designed databases and modular risk analysis methodologies and models. RAMS is a flexible modular system that can be focused on targeted risk analysis needs. It is specifically designed to address risks associated with overall strategy, technical alternative, and `what if` questions regarding the Hanford cleanup mission. RAMS is set up to address both near-term and long-term risk issues. Consistency is very important for any comparative risk analysis, and RAMS is designed to efficiently and consistently compare risks and produce risk reduction estimates. There is a wide range of output information that can be generated by RAMS. These outputs can be detailed by individual contaminants, waste forms, transport pathways, exposure scenarios, individuals, populations, etc. However, they can also be in rolled-up form to support high-level strategy decisions.

  13. Investment appraisal using quantitative risk analysis.

    Science.gov (United States)

    Johansson, Henrik

    2002-07-01

    Investment appraisal concerned with investments in fire safety systems is discussed. Particular attention is directed at evaluating, in terms of the Bayesian decision theory, the risk reduction that investment in a fire safety system involves. It is shown how the monetary value of the change from a building design without any specific fire protection system to one including such a system can be estimated by use of quantitative risk analysis, the results of which are expressed in terms of a Risk-adjusted net present value. This represents the intrinsic monetary value of investing in the fire safety system. The method suggested is exemplified by a case study performed in an Avesta Sheffield factory.

  14. Geostatistical methods for radiological evaluation and risk analysis of contaminated premises

    International Nuclear Information System (INIS)

    Desnoyers, Y.; Jeannee, N.; Chiles, J.P.; Dubot, D.

    2009-01-01

    Full text: At the end of process equipment dismantling, the complete decontamination of nuclear facilities requires the radiological assessment of residual activity levels of building structures. As stated by the IAEA, 'Segregation and characterization of contaminated materials are the key elements of waste minimization'. From this point of view, the set up of an appropriate evaluation methodology is of primordial importance. The radiological characterization of contaminated premises can be divided into three steps. First, the most exhaustive facility analysis provides historical, functional and qualitative information. Then, a systematic (exhaustive or not) control of the emergent signal is performed by means of in situ measurement methods such as surface control device combined with in situ gamma spectrometry. Besides, in order to assess the contamination depth, samples can be collected from boreholes at several locations within the premises and analyzed. Combined with historical information and emergent signal maps, such data improve and reinforce the preliminary waste zoning. In order to provide reliable estimates while avoiding supplementary investigation costs, there is therefore a crucial need for sampling optimization methods together with appropriate data processing techniques. The relevance of the geostatistical methodology relies on the presence of a spatial continuity for radiological contamination. In this case, geostatistics provides reliable methods for activity estimation, uncertainty quantification and risk analysis, which are essential decision-making tools for decommissioning and dismantling projects of nuclear installations. Besides, the ability of this geostatistical framework to provide answers to several key issues that generally occur during the clean-up preparation phase is discussed: How to optimise the investigation costs? How to deal with data quality issues? How to consistently take into account auxiliary information such as historical

  15. Earthquake Hazard Analysis Methods: A Review

    Science.gov (United States)

    Sari, A. M.; Fakhrurrozi, A.

    2018-02-01

    One of natural disasters that have significantly impacted on risks and damage is an earthquake. World countries such as China, Japan, and Indonesia are countries located on the active movement of continental plates with more frequent earthquake occurrence compared to other countries. Several methods of earthquake hazard analysis have been done, for example by analyzing seismic zone and earthquake hazard micro-zonation, by using Neo-Deterministic Seismic Hazard Analysis (N-DSHA) method, and by using Remote Sensing. In its application, it is necessary to review the effectiveness of each technique in advance. Considering the efficiency of time and the accuracy of data, remote sensing is used as a reference to the assess earthquake hazard accurately and quickly as it only takes a limited time required in the right decision-making shortly after the disaster. Exposed areas and possibly vulnerable areas due to earthquake hazards can be easily analyzed using remote sensing. Technological developments in remote sensing such as GeoEye-1 provide added value and excellence in the use of remote sensing as one of the methods in the assessment of earthquake risk and damage. Furthermore, the use of this technique is expected to be considered in designing policies for disaster management in particular and can reduce the risk of natural disasters such as earthquakes in Indonesia.

  16. Risk analysis

    International Nuclear Information System (INIS)

    Baron, J.H.; Nunez McLeod, J.; Rivera, S.S.

    1997-01-01

    This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field [es

  17. The JPL Cost Risk Analysis Approach that Incorporates Engineering Realism

    Science.gov (United States)

    Harmon, Corey C.; Warfield, Keith R.; Rosenberg, Leigh S.

    2006-01-01

    This paper discusses the JPL Cost Engineering Group (CEG) cost risk analysis approach that accounts for all three types of cost risk. It will also describe the evaluation of historical cost data upon which this method is based. This investigation is essential in developing a method that is rooted in engineering realism and produces credible, dependable results to aid decision makers.

  18. Ergonomic lumbar risk analysis of construction workers by NIOSH method

    Directory of Open Access Journals (Sweden)

    Cinara Caetano Pereira

    2015-09-01

    Full Text Available Work in construction has tasks directly connected with manual transport. One of the body segments suffering greater demand in works with these characteristics is the lumbar spine segment. The aim of this study was to analyze the level of risk of lumbar construction workers in the shipment of materials. The sample was composed of 74 construction workers. Were used as a research tool: the NIOSH method for lumbar risk verification expressed by weight limit recommended (WPR and the lifting Index (IL, Visual analogue scale (VAS for the evaluation of pain intensity, the e-1 Corlett.0 for the mapping of the pain and Borg to the subjective perception of the intensity of physical exertion. The present study identified the weight limit (WP of 8.707 for management activity of bags of cement for the load of 8.194 wheelbarrows used. These findings are 6 times under actual weights handled during the activities that revolve around 50 kg with the sacks and averaged 49.72 kg stands with mass. The dimensional settings found in the search are at high risk for ergonomic lumbar region, and measures of reconfiguration of workplaces and operation of auxiliary devices for lifting, transporting and unloading are fundamental, in addition to the need for reflection about the current logistical problems that induce producers to supply the cement sacks with 50 kg.

  19. Safety analysis and risk assessment handbook

    International Nuclear Information System (INIS)

    Peterson, V.L.; Colwell, R.G.; Dickey, R.L.

    1997-01-01

    This Safety Analysis and Risk Assessment Handbook (SARAH) provides guidance to the safety analyst at the Rocky Flats Environmental Technology Site (RFETS) in the preparation of safety analyses and risk assessments. Although the older guidance (the Rocky Flats Risk Assessment Guide) continues to be used for updating the Final Safety Analysis Reports developed in the mid-1980s, this new guidance is used with all new authorization basis documents. With the mission change at RFETS came the need to establish new authorization basis documents for its facilities, whose functions had changed. The methodology and databases for performing the evaluations that support the new authorization basis documents had to be standardized, to avoid the use of different approaches and/or databases for similar accidents in different facilities. This handbook presents this new standardized approach. The handbook begins with a discussion of the requirements of the different types of authorization basis documents and how to choose the one appropriate for the facility to be evaluated. It then walks the analyst through the process of identifying all the potential hazards in the facility, classifying them, and choosing the ones that need to be analyzed further. It then discusses the methods for evaluating accident initiation and progression and covers the basic steps in a safety analysis, including consequence and frequency binning and risk ranking. The handbook lays out standardized approaches for determining the source terms of the various accidents (including airborne release fractions, leakpath factors, etc.), the atmospheric dispersion factors appropriate for Rocky Flats, and the methods for radiological and chemical consequence assessments. The radiological assessments use a radiological open-quotes templateclose quotes, a spreadsheet that incorporates the standard values of parameters, whereas the chemical assessments use the standard codes ARCHIE and ALOHA

  20. Methods for risk estimation in nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Gauvenet, A [CEA, 75 - Paris (France)

    1979-01-01

    The author presents methods for estimating the different risks related to nuclear energy: immediate or delayed risks, individual or collective risks, risks of accidents and long-term risks. These methods have attained a highly valid level of elaboration and their application to other industrial or human problems is currently under way, especially in English-speaking countries.

  1. Advanced methods for a probabilistic safety analysis of fires. Development of advanced methods for performing as far as possible realistic plant specific fire risk analysis (fire PSA)

    International Nuclear Information System (INIS)

    Hofer, E.; Roewekamp, M.; Tuerschmann, M.

    2003-07-01

    In the frame of the research project RS 1112 'Development of Methods for a Recent Probabilistic Safety Analysis, Particularly Level 2' funded by the German Federal Ministry of Economics and Technology (BMWi), advanced methods, in particular for performing as far as possible realistic plant specific fire risk analyses (fire PSA), should be developed. The present Technical Report gives an overview on the methodologies developed in this context for assessing the fire hazard. In the context of developing advanced methodologies for fire PSA, a probabilistic dynamics analysis with a fire simulation code including an uncertainty and sensitivity study has been performed for an exemplary scenario of a cable fire induced by an electric cabinet inside the containment of a modern Konvoi type German nuclear power plant taking into consideration the effects of fire detection and fire extinguishing means. With the present study, it was possible for the first time to determine the probabilities of specified fire effects from a class of fire events by means of probabilistic dynamics supplemented by uncertainty and sensitivity analyses. The analysis applies a deterministic dynamics model, consisting of a dynamic fire simulation code and a model of countermeasures, considering effects of the stochastics (so-called aleatory uncertainties) as well as uncertainties in the state of knowledge (so-called epistemic uncertainties). By this means, probability assessments including uncertainties are provided to be used within the PSA. (orig.) [de

  2. Evaluation of Contamination Inspection and Analysis Methods through Modeling System Performance

    Science.gov (United States)

    Seasly, Elaine; Dever, Jason; Stuban, Steven M. F.

    2016-01-01

    Contamination is usually identified as a risk on the risk register for sensitive space systems hardware. Despite detailed, time-consuming, and costly contamination control efforts during assembly, integration, and test of space systems, contaminants are still found during visual inspections of hardware. Improved methods are needed to gather information during systems integration to catch potential contamination issues earlier and manage contamination risks better. This research explores evaluation of contamination inspection and analysis methods to determine optical system sensitivity to minimum detectable molecular contamination levels based on IEST-STD-CC1246E non-volatile residue (NVR) cleanliness levels. Potential future degradation of the system is modeled given chosen modules representative of optical elements in an optical system, minimum detectable molecular contamination levels for a chosen inspection and analysis method, and determining the effect of contamination on the system. By modeling system performance based on when molecular contamination is detected during systems integration and at what cleanliness level, the decision maker can perform trades amongst different inspection and analysis methods and determine if a planned method is adequate to meet system requirements and manage contamination risk.

  3. A comparison of radiological risk assessment methods for environmental restoration

    International Nuclear Information System (INIS)

    Dunning, D.E. Jr.; Peterson, J.M.

    1993-01-01

    Evaluation of risks to human health from exposure to ionizing radiation at radioactively contaminated sites is an integral part of the decision-making process for determining the need for remediation and selecting remedial actions that may be required. At sites regulated under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), a target risk range of 10 -4 to 10 -6 incremental cancer incidence over a lifetime is specified by the US Environmental Protection Agency (EPA) as generally acceptable, based on the reasonable maximum exposure to any individual under current and future land use scenarios. Two primary methods currently being used in conducting radiological risk assessments at CERCLA sites are compared in this analysis. Under the first method, the radiation dose equivalent (i.e., Sv or rem) to the receptors of interest over the appropriate period of exposure is estimated and multiplied by a risk factor (cancer risk/Sv). Alternatively, incremental cancer risk can be estimated by combining the EPA's cancer slope factors (previously termed potency factors) for radionuclides with estimates of radionuclide intake by ingestion and inhalation, as well as radionuclide concentrations in soil that contribute to external dose. The comparison of the two methods has demonstrated that resulting estimates of lifetime incremental cancer risk under these different methods may differ significantly, even when all other exposure assumptions are held constant, with the magnitude of the discrepancy depending upon the dominant radionuclides and exposure pathways for the site. The basis for these discrepancies, the advantages and disadvantages of each method, and the significance of the discrepant results for environmental restoration decisions are presented

  4. Use-related risk analysis for medical devices based on improved FMEA.

    Science.gov (United States)

    Liu, Long; Shuai, Ma; Wang, Zhu; Li, Ping

    2012-01-01

    In order to effectively analyze and control use-related risk of medical devices, quantitative methodologies must be applied. Failure Mode and Effects Analysis (FMEA) is a proactive technique for error detection and risk reduction. In this article, an improved FMEA based on Fuzzy Mathematics and Grey Relational Theory is developed to better carry out user-related risk analysis for medical devices. As an example, the analysis process using this improved FMEA method for a certain medical device (C-arm X-ray machine) is described.

  5. Risk assessment of water pollution sources based on an integrated k-means clustering and set pair analysis method in the region of Shiyan, China.

    Science.gov (United States)

    Li, Chunhui; Sun, Lian; Jia, Junxiang; Cai, Yanpeng; Wang, Xuan

    2016-07-01

    Source water areas are facing many potential water pollution risks. Risk assessment is an effective method to evaluate such risks. In this paper an integrated model based on k-means clustering analysis and set pair analysis was established aiming at evaluating the risks associated with water pollution in source water areas, in which the weights of indicators were determined through the entropy weight method. Then the proposed model was applied to assess water pollution risks in the region of Shiyan in which China's key source water area Danjiangkou Reservoir for the water source of the middle route of South-to-North Water Diversion Project is located. The results showed that eleven sources with relative high risk value were identified. At the regional scale, Shiyan City and Danjiangkou City would have a high risk value in term of the industrial discharge. Comparatively, Danjiangkou City and Yunxian County would have a high risk value in terms of agricultural pollution. Overall, the risk values of north regions close to the main stream and reservoir of the region of Shiyan were higher than that in the south. The results of risk level indicated that five sources were in lower risk level (i.e., level II), two in moderate risk level (i.e., level III), one in higher risk level (i.e., level IV) and three in highest risk level (i.e., level V). Also risks of industrial discharge are higher than that of the agricultural sector. It is thus essential to manage the pillar industry of the region of Shiyan and certain agricultural companies in the vicinity of the reservoir to reduce water pollution risks of source water areas. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Simple probabilistic method for relative risk evaluation of nuclear terrorism events

    International Nuclear Information System (INIS)

    Zhang Songbai; Wu Jun

    2006-01-01

    On the basis of the event-tree and probability analysis methods, a probabilistic method of nuclear terrorism risk was built, and the risk of terrorism events was analyzed. With the statistical data for and hypothetical data for relative events, the relative probabilities of the four kinds of nuclear terrorism events were obtained, as well as the relative risks of these four kinds of nuclear terrorism events were calculated by using this probabilistic method. The illustrated case show that the descending sequence of damages from the four kinds of nuclear terrorism events for single event is as following: nuclear explosive and improvised nuclear explosive, nuclear facility attacked, and 'dirty bomb'. Under the hypothetical condition, the descending sequence of possibilities for the four kinds of nuclear terrorism events is as following: 'dirty bomb', nuclear facility attacked, improvised nuclear explosive and nuclear explosive, but the descending sequence of risks is as following: 'dirty bomb', improvised nuclear explosive, nuclear facility attacked, and nuclear explosive . (authors)

  7. Software Tool Implementing the Fuzzy AHP Method in Ecological Risk Assessment

    Directory of Open Access Journals (Sweden)

    Radionovs Andrejs

    2017-12-01

    Full Text Available Due to the increased spread of invasive animals and plants in the territory of Latvia, the necessity of ecological risk assessment related to such kind of spread has grown lately. In cases with sufficient statistical data, the risk assessment may be successfully performed on the basis of statistical methods. The amount of statistical data in the context of spread of invasive animals and plants is pretty poor; therefore, the only method of ecological risk assessment remains subjective judgements of experts. The present paper proposes using a programming tool for ecological risk analysis elaborated by the authors. With the help of this programming tool the method of Fuzzy Analytical Hierarchical Process is implemented. The elements of the pairwise comparison matrix are allowed to be expressed by triangular and trapezoidal fuzzy sets. The presented tool makes it possible to design the fuzzy pair-wise comparison matrix and process the results in a user-friendly way.

  8. The SOBANE risk management strategy and the Déparis method for the participatory screening of the risks.

    Science.gov (United States)

    Malchaire, J B

    2004-08-01

    The first section of the document describes a risk-prevention strategy, called SOBANE, in four levels: screening, observation, analysis and expertise. The aim is to make risk prevention faster, more cost effective, and more effective in coordinating the contributions of the workers themselves, their management, the internal and external occupational health (OH) practitioners and the experts. These four levels are: screening, where the risk factors are detected by the workers and their management, and obvious solutions are implemented; observation, where the remaining problems are studied in more detail, one by one, and the reasons and the solutions are discussed in detail; analysis, where, when necessary, an OH practitioner is called upon to carry out appropriate measurements to develop specific solutions; expertise, where, in very sophisticated and rare cases, the assistance of an expert is called upon to solve a particular problem. The method for the participatory screening of the risks (in French: Dépistage Participatif des Risques), Déparis, is proposed for the first level screening of the SOBANE strategy. The work situation is systematically reviewed and all the aspects conditioning the easiness, the effectiveness and the satisfaction at work are discussed, in search of practical prevention measures. The points to be studied more in detail at level 2, observation, are identified. The method is carried out during a meeting of key workers and technical staff. The method proves to be simple, sparing in time and means and playing a significant role in the development of a dynamic plan of risk management and of a culture of dialogue in the company.

  9. The Intersectoral Collaboration Document for Cancer Risk Factors Reduction: Method and Stakeholder Analysis

    Directory of Open Access Journals (Sweden)

    Ali-Asghar Kolahi

    2016-03-01

    Full Text Available Background and Objective: Cancers are one of the most important public health issues and the third leading cause of mortality after cardiovascular diseases and injuries in Iran. The most common cancers reported in the recent years have been included skin, stomach, breast, colon, bladder, leukemia, and esophagus respectively. Control of cancer as one of the three main health system priorities of Iran, needs a specific roadmap and clear task definition for involved organizations. This study provides stakeholder analysis include determining the roles of Ministry of Health and Medical Education as the custodian of the national health and the duties of other beneficiary organizations to reduce the risk of cancer for cooperation with a scientific approach and systematic methodology.Materials and Methods: This health system research project was performed by participation of Social Determinants of Health Research Center of Shahid Beheshti University of Medical Sciences, Office of the Non-Communicable Diseases of the Ministry of Health and Medical Education and other stakeholders in 2013. At first, the strategic committee was established and the stakeholders were identified and analyzed. Then the quantitative data were collected by searching in national database concern incidence, prevalence, and burden of all types of cancers. At the last with the qualitative approach, a systematic review of the studies, documents and reports was conducted as well as conversing for the national strategic plans of Iran and other countries and the experts’ views regarding management of the cancer risk factors. In practice, role and responsibilities of each stakeholder were practically analyzed. Then the risk factors identified and the effective evidence-based interventions were determined for each cancer and finally the role of the Ministry of Health were set as the responsible or co-worker and also the role of the other organizations separately clarified in each

  10. Methods development to evaluate the risk of upgrading to DCS: The human factor

    Energy Technology Data Exchange (ETDEWEB)

    Ostrom, L.T.; Wilhelmsen, C.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-04-01

    The NRC recognizes that a more complete technical basis for understanding and regulating advanced digital technologies in commercial nuclear power plants is needed. A concern is that the introduction of digital safety systems may have an impact on risk. There is currently no standard methodology for measuring digital system reliability. A tool currently used to evaluate NPP risk in analog systems is the probabilistic risk assessment (PRA). The use of this tool to evaluate the digital system risk was considered to be a potential methodology for determining the risk. To test this hypothesis, it was decided to perform a limited PRA on a single dominant accident sequence. However, a review of existing human reliability analysis (HRA) methods showed that they were inadequate to analyze systems utilizing digital technology. A four step process was used to adapt existing HRA methodologies to digital environments and to develop new techniques. The HRA methods were then used to analyze an NPP that had undergone a backfit to digital technology in order to determine, as a first step, whether the methods were effective. The very small-break loss of coolant accident sequence was analyzed to determine whether the upgrade to the Eagle-21 process protection system had an effect on risk. The analysis of the very small-break LOCA documented in the Sequoyah PRA was used as the basis of the analysis. The analysis of the results of the HRA showed that the mean human error probabilities for the Eagle-21 PPS were slightly less than those for the analog system it replaced. One important observation from the analysis is that the operators have increased confidence steming from the better level of control provided by the digital system. The analysis of the PRA results, which included the human error component and the Eagle-21 PPS, disclosed that the reactor protection system had a higher failure rate than the analog system, although the difference was not statistically significant.

  11. An introductory guide to uncertainty analysis in environmental and health risk assessment

    International Nuclear Information System (INIS)

    Hoffman, F.O.; Hammonds, J.S.

    1992-10-01

    To compensate for the potential for overly conservative estimates of risk using standard US Environmental Protection Agency methods, an uncertainty analysis should be performed as an integral part of each risk assessment. Uncertainty analyses allow one to obtain quantitative results in the form of confidence intervals that will aid in decision making and will provide guidance for the acquisition of additional data. To perform an uncertainty analysis, one must frequently rely on subjective judgment in the absence of data to estimate the range and a probability distribution describing the extent of uncertainty about a true but unknown value for each parameter of interest. This information is formulated from professional judgment based on an extensive review of literature, analysis of the data, and interviews with experts. Various analytical and numerical techniques are available to allow statistical propagation of the uncertainty in the model parameters to a statement of uncertainty in the risk to a potentially exposed individual. Although analytical methods may be straightforward for relatively simple models, they rapidly become complicated for more involved risk assessments. Because of the tedious efforts required to mathematically derive analytical approaches to propagate uncertainty in complicated risk assessments, numerical methods such as Monte Carlo simulation should be employed. The primary objective of this report is to provide an introductory guide for performing uncertainty analysis in risk assessments being performed for Superfund sites

  12. Analysis of risk factors and risk assessment for ischemic stroke recurrence

    Directory of Open Access Journals (Sweden)

    Xiu-ying LONG

    2016-08-01

    Full Text Available Objective To screen the risk factors for recurrence of ischemic stroke and to assess the risk of recurrence. Methods Essen Stroke Risk Score (ESRS was used to evaluate the risk of recurrence in 176 patients with ischemic stroke (96 cases of first onset and 80 cases of recurrence. Univariate and multivariate stepwise Logistic regression analysis was used to screen risk factors for recurrence of ischemic stroke.  Results There were significant differences between first onset group and recurrence group on age, the proportion of > 75 years old, hypertension, diabetes, coronary heart disease, peripheral angiopathy, transient ischemic attack (TIA or ischemic stroke, drinking and ESRS score (P < 0.05, for all. First onset group included one case of ESRS 0 (1.04%, 8 cases of 1 (8.33%, 39 cases of 2 (40.63%, 44 cases of 3 (45.83%, 4 cases of 4 (4.17%. Recurrence group included 2 cases of ESRS 3 (2.50%, 20 cases of 4 (25% , 37 cases of 5 (46.25% , 18 cases of 6 (22.50% , 3 cases of 7 (3.75% . There was significant difference between 2 groups (Z = -11.376, P = 0.000. Logistic regression analysis showed ESRS > 3 score was independent risk factor for recurrence of ischemic stroke (OR = 31.324, 95%CI: 3.934-249.430; P = 0.001.  Conclusions ESRS > 3 score is the independent risk factor for recurrence of ischemic stroke. It is important to strengthen risk assessment of recurrence of ischemic stroke. To screen and control risk factors is the key to secondary prevention of ischemic stroke. DOI: 10.3969/j.issn.1672-6731.2016.07.011

  13. Methodology for flood risk analysis for nuclear power plants

    International Nuclear Information System (INIS)

    Wagner, D.P.; Casada, M.L.; Fussell, J.B.

    1984-01-01

    The methodology for flood risk analysis described here addresses the effects of a flood on nuclear power plant safety systems. Combining the results of this method with the probability of a flood allows the effects of flooding to be included in a probabilistic risk assessment. The five-step methodology includes accident sequence screening to focus the detailed analysis efforts on the accident sequences that are significantly affected by a flood event. The quantitative results include the flood's contribution to system failure probability, accident sequence occurrence frequency and consequence category occurrence frequency. The analysis can be added to existing risk assessments without a significant loss in efficiency. The results of two example applications show the usefulness of the methodology. Both examples rely on the Reactor Safety Study for the required risk assessment inputs and present changes in the Reactor Safety Study results as a function of flood probability

  14. Network theory-based analysis of risk interactions in large engineering projects

    International Nuclear Information System (INIS)

    Fang, Chao; Marle, Franck; Zio, Enrico; Bocquet, Jean-Claude

    2012-01-01

    This paper presents an approach based on network theory to deal with risk interactions in large engineering projects. Indeed, such projects are exposed to numerous and interdependent risks of various nature, which makes their management more difficult. In this paper, a topological analysis based on network theory is presented, which aims at identifying key elements in the structure of interrelated risks potentially affecting a large engineering project. This analysis serves as a powerful complement to classical project risk analysis. Its originality lies in the application of some network theory indicators to the project risk management field. The construction of the risk network requires the involvement of the project manager and other team members assigned to the risk management process. Its interpretation improves their understanding of risks and their potential interactions. The outcomes of the analysis provide a support for decision-making regarding project risk management. An example of application to a real large engineering project is presented. The conclusion is that some new insights can be found about risks, about their interactions and about the global potential behavior of the project. - Highlights: ► The method addresses the modeling of complexity in project risk analysis. ► Network theory indicators enable other risks than classical criticality analysis to be highlighted. ► This topological analysis improves project manager's understanding of risks and risk interactions. ► This helps project manager to make decisions considering the position in the risk network. ► An application to a real tramway implementation project in a city is provided.

  15. The development of the risk-based cost-benefit analysis framework for risk-informed regulation

    International Nuclear Information System (INIS)

    Yang, Z. A.; Hwang, M. J.; Lee, K. S.

    2001-01-01

    US NRC (Nuclear Regulatory Committee) introduces the Risk-informed Regulation (RIR) to allocate the resources of NRC effectively and to reduce the unnecessary burden of utilities. This approach inherently includes the cost-benefit analysis (CBA) concept. The CBA method has been widely used for many problems in order to support the decision making by analyzing the effectiveness of the proposed plan and/or activity in the aspect of cost and benefit. However, in general, the conventional CBA method does not use the information such as risk that is the essential element of RIR. So, we developed a revised CBA framework that incorporates the risk information in analyzing the cost and benefit of the regulatory and/or operational activities in nuclear industry

  16. Risk factors for radiation-induced hypothyroidism: A Literature-Based Meta-Analysis

    DEFF Research Database (Denmark)

    Vogelius, Ivan R; Bentzen, Søren; Maraldo, Maja V

    2011-01-01

    BACKGROUND: A systematic overview and meta-analysis of studies reporting data on hypothyroidism (HT) after radiation therapy was conducted to identify risk factors for development of HT. METHODS: Published studies were identified from the PubMed and Embase databases and by hand-searching published...... reviews. Studies allowing the extraction of odds ratios (OR) for HT in 1 or more of several candidate clinical risk groups were included. A meta-analysis of the OR for development of HT with or without each of the candidate risk factors was performed. Furthermore, studies allowing the extraction......% risk of HT at a dose of 45 Gy but with considerable variation in the dose response between studies. Chemotherapy and age were not associated with risk of HT in this analysis. CONCLUSIONS: Several clinical risk factors for HT were identified. The risk of HT increases with increasing radiation dose...

  17. Joint analysis of site-specific cancer risks for the atomic bomb survivors

    International Nuclear Information System (INIS)

    Pierce, D.A.; Preston, D.L.

    1993-01-01

    Statistical methods are presented for joint analysis of site-specific cancer risks for the atomic-bomb survivors. Previous analyses of these data, aside from those on leukemia, have been made either without regard to cancer type, or separately for types or classes of cancers. Clearly, analyses without regard to cancer type are less than satisfactory. The primary advantages of joint, rather than separate, analyses are that (1) models can be fitted with parameters common to cancer types, which can allow more-precise estimation of effects of interest, (2) significance tests can be used to compare type-specific risks, and (3) a clearer understanding may be obtained of risk-modification factors such as sex, age at exposure, and time since exposure. Joint analysis is straightforward, entailing primarily the incorporation of another factor for cancer type in the usual cross-tabulation of the data for analysis. The use of these methods is illustrated in an analysis of the three categories of cancer studied by the fifth Advisory Committee on the Biological Effects of Ionizing Radiation (BEIR V): digestive, respiratory, and other solid tumors. Based on this analysis, some criticism is made of the BEIR V-preferred models. Since the proposed methods are applicable to models for either relative or absolute risks, some comments on the use of explicit models for the absolute excess risk are also given. Although some of the gains from joint analysis are apparent from the results here, it will be important to use these methods with a more suitable choice of cancer classes and for cancer incidence data in which the diagnoses are more accurate. (author)

  18. Risk analysis: opening the process

    International Nuclear Information System (INIS)

    Hubert, Ph.; Mays, C.

    1998-01-01

    This conference on risk analysis took place in Paris, 11-14 october 1999. Over 200 paper where presented in the seven following sessions: perception; environment and health; persuasive risks; objects and products; personal and collective involvement; assessment and valuation; management. A rational approach to risk analysis has been developed in the three last decades. Techniques for risk assessment have been thoroughly enhanced, risk management approaches have been developed, decision making processes have been clarified, the social dimensions of risk perception and management have been investigated. Nevertheless this construction is being challenged by recent events which reveal how deficits in stakeholder involvement, openness and democratic procedures can undermine risk management actions. Indeed, the global process most components of risk analysis may be radically called into question. Food safety has lately been a prominent issue, but now debates appear, or old debates are revisited in the domains of public health, consumer products safety, waste management, environmental risks, nuclear installations, automobile safety and pollution. To meet the growing pressures for efficiency, openness, accountability, and multi-partner communication in risk analysis, institutional changes are underway in many European countries. However, the need for stakeholders to develop better insight into the process may lead to an evolution of all the components of risks analysis, even in its most (technical' steps. For stakeholders of different professional background, political projects, and responsibilities, risk identification procedures must be rendered understandable, quantitative risk assessment must be intelligible and accommodated in action proposals, ranging from countermeasures to educational programs to insurance mechanisms. Management formats must be open to local and political input and other types of operational feedback. (authors)

  19. Risk analysis methodologies for the transportation of radioactive materials

    International Nuclear Information System (INIS)

    Geffen, C.A.

    1983-05-01

    Different methodologies have evolved for consideration of each of the many steps required in performing a transportation risk analysis. Although there are techniques that attempt to consider the entire scope of the analysis in depth, most applications of risk assessment to the transportation of nuclear fuel cycle materials develop specific methodologies for only one or two parts of the analysis. The remaining steps are simplified for the analyst by narrowing the scope of the effort (such as evaluating risks for only one material, or a particular set of accident scenarios, or movement over a specific route); performing a qualitative rather than a quantitative analysis (probabilities may be simply ranked as high, medium or low, for instance); or assuming some generic, conservative conditions for potential release fractions and consequences. This paper presents a discussion of the history and present state-of-the-art of transportation risk analysis methodologies. Many reports in this area were reviewed as background for this presentation. The literature review, while not exhaustive, did result in a complete representation of the major methods used today in transportation risk analysis. These methodologies primarily include the use of severity categories based on historical accident data, the analysis of specifically assumed accident sequences for the transportation activity of interest, and the use of fault or event tree analysis. Although the focus of this work has generally been on potential impacts to public groups, some effort has been expended in the estimation of risks to occupational groups in transportation activities

  20. The Application of DEA Method in Evaluating Credit Risk of Companies

    Directory of Open Access Journals (Sweden)

    Anna Feruś

    2010-12-01

    Full Text Available The subject of the present article is a new procedure forecasting credit risk of companies in Polish economy environment. What favors the suggested approach is the fact that in Poland, unlike in western countries, DEA method has not yet been implemented in order to assess credit risk that companies face. The research described in the article has been conducted on the basis of comparison of suggested DEA method with currently used procedures, namely point method, discriminative analysis and linear regression. Considering the research, it can be concluded that DEA method facilitates forecasting financial problems, including bankruptcy of companies in Polish economic conditions, and its effectiveness is comparable or even greater than approaches implemented so far.  

  1. Risk analysis local grids. Mapping and reduction of risks in electric power grids; Riskanalysmetod lokalnaet. Kartlaeggning och reduktion av risker i elnaet

    Energy Technology Data Exchange (ETDEWEB)

    Kylefors, Martin; Fredholm, Lotta; Sandstroem, Cecilia

    2007-11-15

    The objective of the project has been to contribute to development of risk analysis applications that correspond to the need of investments as an effect of new regulation. The aim has been to develop a method for screening and assessing risks, and for ranking risk reducing measures in order of priority. Phase 1 has consisted of an overview of methods, selection of appropriate methods, and development of principles regarding application suitable for power distribution companies. Phase 2 has consisted of adjustments and tests of the method. The method focuses on risks associated with power failures, with a duration exceeding 12 hours, in medium voltage local networks. Stations are excluded. The suggested method is based on principles of Preliminary Hazard Analysis and Cost-Benefit Analysis. Risks are suggested to be assessed based on three main factors (load, exposure and alternative supply). The quota between the highest and lowest value is 20 for each factor. Each factor is assessed by underlying factors such as type of cable/wire, number of customers and average power consumption. By multiplying the factors a resulting risk level is obtained in the range of 0.05 to 400. The level determines the need for further investments. Appropriate risk reducing measure is selected by putting the risk reduction (benefit) in relation to the total costs for investment and maintenance, for each alternative measure. There is a further need for development of a method for stations. There is also a further need for development of a priority model in city networks where power failures less than 12 hours are taken into account. Finally there is a need to turn the functional requirement (no power failures exceeding 24 hours) into an acceptable risk level

  2. Dietary patterns and colorectal cancer risk: a meta-analysis.

    Science.gov (United States)

    Feng, Yu-Liang; Shu, Long; Zheng, Pei-Fen; Zhang, Xiao-Yan; Si, Cai-Juan; Yu, Xiao-Long; Gao, Wei; Zhang, Lun

    2017-05-01

    The analysis of dietary patterns has recently drawn considerable attention as a method of investigating the association between the overall whole diet and the risk of colorectal cancer. However, the results have yielded conflicting findings. Here, we carried out a meta-analysis to identify the association between dietary patterns and the risk of colorectal cancer. A total of 40 studies fulfilled the inclusion criteria and were included in this meta-analysis. The highest category of 'healthy' dietary pattern compared with the lowest category was apparently associated with a decreased risk for colorectal cancer [odds ratio (OR)=0.75; confidence interval (CI): 0.68-0.83; Pcolorectal cancer was shown for the highest compared with the lowest category of a 'western-style' dietary pattern (OR=1.40; CI: 1.26-1.56; Pcolorectal cancer in the highest compared with the lowest category of 'alcohol-consumption' pattern (OR=1.44; CI: 1.13-1.82; P=0.003). The results of this meta-analysis indicate that a 'healthy' dietary pattern may decrease the risk of colorectal cancer, whereas 'western-style' and 'alcohol-consumption' patterns may increase the risk of colorectal cancer.

  3. Design of Process Displays based on Risk Analysis Techniques

    DEFF Research Database (Denmark)

    Paulsen, Jette Lundtang

    -tions. On the basis of her experience with the design of display systems; with risk analysis methods and from 8 years, as an engi-neer-on-shift at a research reactor, the author developed a method to elicit necessary information to the operator. The method, a combination of a Goal-Tree and a Fault-Tree, is described...

  4. Challenges in the vulnerability and risk analysis of critical infrastructures

    International Nuclear Information System (INIS)

    Zio, Enrico

    2016-01-01

    The objective of this paper is to provide a systematic view on the problem of vulnerability and risk analysis of critical infrastructures. Reflections are made on the inherent complexities of these systems, related challenges are identified and possible ways forward for their analysis and management are indicated. Specifically: the framework of vulnerability and risk analysis is examined in relation to its application for the protection and resilience of critical infrastructures; it is argued that the complexity of these systems is a challenging characteristic, which calls for the integration of different modeling perspectives and new approaches of analysis; examples of are given in relation to the Internet and, particularly, the electric power grid, as representative of critical infrastructures and the associated complexity; the integration of different types of analyses and methods of system modeling is put forward for capturing the inherent structural and dynamic complexities of critical infrastructures and eventually evaluating their vulnerability and risk characteristics, so that decisions on protections and resilience actions can be taken with the required confidence. - Highlights: • The problem of the protection and resilience of CIs is the focus of the work. • The vulnerability and risk analysis framework for this is critically examined. • The complexity of CIs is presented as a challenge for system modeling and analysis. • The integration of different modeling perspectives of analysis is put forward as a solution. • The extension of the analysis framework to new methods for dealing with surprises and black swans is advocated.

  5. APPROPRIATE ALLOCATION OF CONTINGENCY USING RISK ANALYSIS METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Andi Andi

    2004-01-01

    Full Text Available Many cost overruns in the world of construction are attributable to either unforeseen events or foreseen events for which uncertainty was not appropriately accommodated. It is argued that a significant improvement to project management performance may result from greater attention to the process of analyzing project risks. The objective of this paper is to propose a risk analysis methodology for appropriate allocation of contingency in project cost estimation. In the first step, project risks will be identified. Influence diagramming technique is employed to identify and to show how the risks affect the project cost elements and also the relationships among the risks themselves. The second step is to assess the project costs with regards to the risks under consideration. Using a linguistic approach, the degree of uncertainty of identified project risks is assessed and quantified. The problem of dependency between risks is taken into consideration during this analysis. For the final step, as the main purpose of this paper, a method for allocating appropriate contingency is presented. Two types of contingencies, i.e. project contingency and management reserve are proposed to accommodate the risks. An illustrative example is presented at the end to show the application of the methodology.

  6. Introduction to cost-effectiveness analysis of risk reduction measures in energy systems

    International Nuclear Information System (INIS)

    1986-07-01

    The aim of this report is to introduce readers to methods of cost-effectiveness analysis and their application in risk reduction, especially in connection with the energy-producing industries. The background to the assessment of risk and the problems in estimating it quantitatively are outlined. The methodology of cost-effectiveness analysis is then described, particular attention being given to the way in which results are derived and the overall use that can be made of them. This is followed by a discussion of quantitative applications and an outline of the methods that may be used to derive estimates both of risk and the cost of reducing it. The use of cost-effectiveness analysis is illustrated in an appendix, which gives as a worked example a case study on the reduction of public risk associated with radioactive releases during normal operation of a PWR. After drawing some general conclusions the report recommends that such analyses should normally be used as an aid to risk management whenever several alternative risk reduction measures are under consideration

  7. Risk and Interdependencies in Critical Infrastructures A Guideline for Analysis

    CERN Document Server

    Utne, Ingrid; Vatn, Jørn

    2012-01-01

    Today’s society is completely dependent on critical networks such as  water supply, sewage, electricity, ICT and transportation. Risk and vulnerability analyses are needed to grasp the impact of threats and hazards. However, these become quite complex as there are strong interdependencies both within and between infrastructure systems. Risk and Interdependencies in Critical Infrastructures: A  guideline for analysis provides methods for analyzing risks and interdependencies of critical infrastructures.  A number of analysis approaches are described and are adapted to each of these infrastructures. Various approaches are also revised, and all are supported by several examples and illustrations. Particular emphasis is given to the analysis of various interdependencies that often exist between the infrastructures.  Risk and Interdependencies in Critical Infrastructures: A  guideline for analysis provides a good tool to identify the hazards that are threatening your infrastructures, and will enhance the un...

  8. A novel method of fuzzy fault tree analysis combined with VB program to identify and assess the risk of coal dust explosions.

    Directory of Open Access Journals (Sweden)

    Hetang Wang

    Full Text Available Coal dust explosions (CDE are one of the main threats to the occupational safety of coal miners. Aiming to identify and assess the risk of CDE, this paper proposes a novel method of fuzzy fault tree analysis combined with the Visual Basic (VB program. In this methodology, various potential causes of the CDE are identified and a CDE fault tree is constructed. To overcome drawbacks from the lack of exact probability data for the basic events, fuzzy set theory is employed and the probability data of each basic event is treated as intuitionistic trapezoidal fuzzy numbers. In addition, a new approach for calculating the weighting of each expert is also introduced in this paper to reduce the error during the expert elicitation process. Specifically, an in-depth quantitative analysis of the fuzzy fault tree, such as the importance measure of the basic events and the cut sets, and the CDE occurrence probability is given to assess the explosion risk and acquire more details of the CDE. The VB program is applied to simplify the analysis process. A case study and analysis is provided to illustrate the effectiveness of this proposed method, and some suggestions are given to take preventive measures in advance and avoid CDE accidents.

  9. Cardiovascular disease risk among breast cancer survivors: an evolutionary concept analysis

    Directory of Open Access Journals (Sweden)

    Vo JB

    2017-02-01

    Full Text Available Jacqueline B Vo,1 Timiya S Nolan,1 David E Vance,1 Patricia A Patrician,2 Karen Meneses1 1Office of Research and Scholarship, 2Department of Family, Community Health, and Systems, University of Alabama at Birmingham School of Nursing, Birmingham, AL, USA Background: More than 3.5 million breast cancer survivors are living in the US, and the overall five-year survival rate is approaching 90%. With increased survival and cancer treatment-related cardiotoxicities, there has been a rise in cardiovascular diseases among breast cancer survivors. Yet, cardiovascular disease risk among breast cancer survivors has not been well conceptualized. The purpose of this article was to analyze and define the concept of cardiovascular disease risk among breast cancer survivors. Methods: The databases CINAHL, EMBASE, and PubMed were used to identify articles that explored cardiovascular disease risk among breast cancer survivors. The search yielded 357 articles, which were reviewed for eligibility. Thirty articles were selected based on the inclusion/exclusion criteria. The concept of cardiovascular disease risk among breast cancer survivors was analyzed using Rodgers’ evolutionary concept analysis method. Results: The analysis suggests that cardiovascular disease risk among breast cancer survivors consists of several attributes: cancer treatment (chemotherapy, targeted therapies, radiation therapy, and endocrine therapy, modifiable risk factors (obesity, physical inactivity, poor diet, and smoking, and nonmodifiable risk factors (age, family history, and race. The antecedent identified includes breast cancer diagnosis and the consequence identified includes the development of cardiovascular disease. Conclusion: Findings suggest the need for increased education and understanding of ­cardiovascular disease risk among health care providers and patients. Survivorship care plans can incorporate cardiovascular disease risk monitoring and screening. Future research

  10. Bayesian-network-based safety risk analysis in construction projects

    International Nuclear Information System (INIS)

    Zhang, Limao; Wu, Xianguo; Skibniewski, Miroslaw J.; Zhong, Jingbing; Lu, Yujie

    2014-01-01

    This paper presents a systemic decision support approach for safety risk analysis under uncertainty in tunnel construction. Fuzzy Bayesian Networks (FBN) is used to investigate causal relationships between tunnel-induced damage and its influential variables based upon the risk/hazard mechanism analysis. Aiming to overcome limitations on the current probability estimation, an expert confidence indicator is proposed to ensure the reliability of the surveyed data for fuzzy probability assessment of basic risk factors. A detailed fuzzy-based inference procedure is developed, which has a capacity of implementing deductive reasoning, sensitivity analysis and abductive reasoning. The “3σ criterion” is adopted to calculate the characteristic values of a triangular fuzzy number in the probability fuzzification process, and the α-weighted valuation method is adopted for defuzzification. The construction safety analysis progress is extended to the entire life cycle of risk-prone events, including the pre-accident, during-construction continuous and post-accident control. A typical hazard concerning the tunnel leakage in the construction of Wuhan Yangtze Metro Tunnel in China is presented as a case study, in order to verify the applicability of the proposed approach. The results demonstrate the feasibility of the proposed approach and its application potential. A comparison of advantages and disadvantages between FBN and fuzzy fault tree analysis (FFTA) as risk analysis tools is also conducted. The proposed approach can be used to provide guidelines for safety analysis and management in construction projects, and thus increase the likelihood of a successful project in a complex environment. - Highlights: • A systemic Bayesian network based approach for safety risk analysis is developed. • An expert confidence indicator for probability fuzzification is proposed. • Safety risk analysis progress is extended to entire life cycle of risk-prone events. • A typical

  11. Comparison study on qualitative and quantitative risk assessment methods for urban natural gas pipeline network.

    Science.gov (United States)

    Han, Z Y; Weng, W G

    2011-05-15

    In this paper, a qualitative and a quantitative risk assessment methods for urban natural gas pipeline network are proposed. The qualitative method is comprised of an index system, which includes a causation index, an inherent risk index, a consequence index and their corresponding weights. The quantitative method consists of a probability assessment, a consequences analysis and a risk evaluation. The outcome of the qualitative method is a qualitative risk value, and for quantitative method the outcomes are individual risk and social risk. In comparison with previous research, the qualitative method proposed in this paper is particularly suitable for urban natural gas pipeline network, and the quantitative method takes different consequences of accidents into consideration, such as toxic gas diffusion, jet flame, fire ball combustion and UVCE. Two sample urban natural gas pipeline networks are used to demonstrate these two methods. It is indicated that both of the two methods can be applied to practical application, and the choice of the methods depends on the actual basic data of the gas pipelines and the precision requirements of risk assessment. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

  12. [Reliability theory based on quality risk network analysis for Chinese medicine injection].

    Science.gov (United States)

    Li, Zheng; Kang, Li-Yuan; Fan, Xiao-Hui

    2014-08-01

    A new risk analysis method based upon reliability theory was introduced in this paper for the quality risk management of Chinese medicine injection manufacturing plants. The risk events including both cause and effect ones were derived in the framework as nodes with a Bayesian network analysis approach. It thus transforms the risk analysis results from failure mode and effect analysis (FMEA) into a Bayesian network platform. With its structure and parameters determined, the network can be used to evaluate the system reliability quantitatively with probabilistic analytical appraoches. Using network analysis tools such as GeNie and AgenaRisk, we are able to find the nodes that are most critical to influence the system reliability. The importance of each node to the system can be quantitatively evaluated by calculating the effect of the node on the overall risk, and minimization plan can be determined accordingly to reduce their influences and improve the system reliability. Using the Shengmai injection manufacturing plant of SZYY Ltd as a user case, we analyzed the quality risk with both static FMEA analysis and dynamic Bayesian Network analysis. The potential risk factors for the quality of Shengmai injection manufacturing were identified with the network analysis platform. Quality assurance actions were further defined to reduce the risk and improve the product quality.

  13. Risk analysis of external radiation therapy

    International Nuclear Information System (INIS)

    Arvidsson, Marcus

    2011-09-01

    External radiation therapy is carried out via a complex treatment process in which many different groups of staff work together. Much of the work is dependent on and in collaboration with advanced technical equipment. The purpose of the research task has been to identify a process for external radiation therapy and to identify, test and analyze a suitable method for performing risk analysis of external radiation therapy

  14. An integral approach to the use of probabilistic risk assessment methods

    International Nuclear Information System (INIS)

    Schwarzblat, M.; Arellano, J.

    1987-01-01

    In this chapter some of the work developed at the Instituto de Investigaciones Electricas in the area of probabilistic risk analysis are presented. In this area, work has been basically focused in the following directions: development and implementation of methods, and applications to real systems. The first part of this paper describes the area of methods development and implementation, presenting an integrated package of computer programs for fault tree analysis. In the second part some of the most important applications developed for real systems are presented. (author)

  15. Methods of Financial Risk Management

    Directory of Open Access Journals (Sweden)

    Korzh Natalia

    2016-10-01

    Full Text Available The essence and nature of financial risks are investigated. Their classification is conducted. The features of financial risk management and the main methods of management are considered. The ways of risk compensation are identified. It is proved that the objective external risk basis is such market imperfections as externalities of enterprises and incomplete information about the operation of the business environment and internal objective basis risk – the objective function to maximise profits in a competitive environment. It is revealed that to compensate market imperfections business entities should develop a strategy that combines fill in missing information and neutralise or minimise externalities that tactically implemented in financial risk management programs.

  16. Business risks, functions, methods of assessment and ways to reduce risk

    Directory of Open Access Journals (Sweden)

    A.V. Mihalchuk

    2015-06-01

    Full Text Available For successful existence in a market economy entrepreneur have to take bold actions, and this increases the risk. The article describes the concept of entrepreneurship and business risk, positive and negative aspects of functions of risk in business. Therefore, it is necessary to assess the risk properly and be able to manage it to achieve the most effective results in the market. In market conditions the problem of assessing and accounting market becomes independent theoretical and practical significance as an important component of the theory and practice of management. Risk - a key element of business activities. Development of risk situations can lead to both the occurrence of adverse effects (losses, lost profits, and positive results for a company in the form of increased profit. This article describes: the concept of entrepreneurship, risk and business risks, characteristic of positive and negative aspects of risk functions in business, methods of assessment and risk reduction, shows formulae and examples you can use to assess risk in an enterprise. Analyzing already established methods of risk assessment a number of rules were proposed in order to reduce business risk.

  17. A method for risk analysis across governance systems: a Great Barrier Reef case study

    International Nuclear Information System (INIS)

    Dale, Allan; Vella, Karen; Potts, Ruth; Pressey, Robert L; Brodie, Jon; Yorkston, Hugh

    2013-01-01

    Healthy governance systems are key to delivering sound environmental management outcomes from global to local scales. There are, however, surprisingly few risk assessment methods that can pinpoint those domains and sub-domains within governance systems that are most likely to influence good environmental outcomes at any particular scale, or those if absent or dysfunctional, most likely to prevent effective environmental management. This paper proposes a new risk assessment method for analysing governance systems. This method is then tested through its preliminary application to a significant real-world context: governance as it relates to the health of Australia’s Great Barrier Reef (GBR). The GBR exists at a supra-regional scale along most of the north eastern coast of Australia. Brodie et al (2012 Mar. Pollut. Bull. 65 81–100) have recently reviewed the state and trend of the health of the GBR, finding that overall trends remain of significant concern. At the same time, official international concern over the governance of the reef has recently been signalled globally by the International Union for the Conservation of Nature (IUCN). These environmental and political contexts make the GBR an ideal candidate for use in testing and reviewing the application of improved tools for governance risk assessment. (letter)

  18. Cumulative Risk Assessment Toolbox: Methods and Approaches for the Practitioner

    Directory of Open Access Journals (Sweden)

    Margaret M. MacDonell

    2013-01-01

    Full Text Available The historical approach to assessing health risks of environmental chemicals has been to evaluate them one at a time. In fact, we are exposed every day to a wide variety of chemicals and are increasingly aware of potential health implications. Although considerable progress has been made in the science underlying risk assessments for real-world exposures, implementation has lagged because many practitioners are unaware of methods and tools available to support these analyses. To address this issue, the US Environmental Protection Agency developed a toolbox of cumulative risk resources for contaminated sites, as part of a resource document that was published in 2007. This paper highlights information for nearly 80 resources from the toolbox and provides selected updates, with practical notes for cumulative risk applications. Resources are organized according to the main elements of the assessment process: (1 planning, scoping, and problem formulation; (2 environmental fate and transport; (3 exposure analysis extending to human factors; (4 toxicity analysis; and (5 risk and uncertainty characterization, including presentation of results. In addition to providing online access, plans for the toolbox include addressing nonchemical stressors and applications beyond contaminated sites and further strengthening resource accessibility to support evolving analyses for cumulative risk and sustainable communities.

  19. Research on the Risk Early Warning Method of Material Supplier Performance in Power Industry

    Science.gov (United States)

    Chen, Peng; Zhang, Xi

    2018-01-01

    The early warning of supplier performance risk is still in the initial stage interiorly, and research on the early warning mechanism to identify, analyze and prevent the performance risk is few. In this paper, a new method aiming at marerial supplier performance risk in power industry is proposed, firstly, establishing a set of risk early warning indexes, Then use the ECM method to classify the indexes to form different risk grades. Then, improving Crock Ford risk quantization model by considering three indicators, including the stability of power system, economic losses and successful bid ratio to form the predictive risk grade, and ultimately using short board effect principle to form the ultimate risk grade to truly reflect the supplier performance risk. Finally, making empirical analysis on supplier performance and putting forward the counter measures and prevention strategies for different risks.

  20. The theoretical aspects of the methodology of risk analysis in chosen business enterprise

    Directory of Open Access Journals (Sweden)

    Josef Zrůst

    2010-01-01

    Full Text Available The risk, crisis, crisis management, crisis regulation and risk management are currently often used terms. It is late to search a cause of crisis in time, when the crisis had broken out and their destructive effects are displaying. It is more suitable to focus on preventive control of business assets. The goal of this article is to suggest a methodical process of risk analysis with focus on protection of carrying business assets. The suggested methodical process of the analysis comes out a persuasion that primary attention is needed to give a protection of carrying business assets. Carrying assets are those which create potentials of business success and in case of their destroying, damaging or loss will originate to subject major or even existence loss. To such chosen carrying business assets are identified threats coming out parts of macro environment (political, legal, economical, social, demographic, technical and technological, ecological and threats from an field environment. To the identification of threats in field environment is used an analysis of five forces model according Porter. As a final step of the suggested methodical process of risk analysis is a creation of a risk matrix to each carrying asset. In this matrix is drawn the risk, which is described with a qualified estimation of occurrence its proba­bility and with an estimation of amount of possible damage, which can be caused by risk. According location the identified risk in the risk matrix is suggested the way of the regulation single risks.It is possible to choose between five basic strategies: Strategy “Take”, Strategy of crisis plans, Strategy of risk treatment, Strategy of risk transfer and Strategy “Terminate”. Single strategies are possible to combine between each other. The combination is suitable in cases, when there is threaten a big loss with a high probability.

  1. Uncertainty Instability Risk Analysis of High Concrete Arch Dam Abutments

    Directory of Open Access Journals (Sweden)

    Xin Cao

    2017-01-01

    Full Text Available The uncertainties associated with concrete arch dams rise with the increased height of dams. Given the uncertainties associated with influencing factors, the stability of high arch dam abutments as a fuzzy random event was studied. In addition, given the randomness and fuzziness of calculation parameters as well as the failure criterion, hazard point and hazard surface uncertainty instability risk ratio models were proposed for high arch dam abutments on the basis of credibility theory. The uncertainty instability failure criterion was derived through the analysis of the progressive instability failure process on the basis of Shannon’s entropy theory. The uncertainties associated with influencing factors were quantized by probability or possibility distribution assignments. Gaussian random theory was used to generate random realizations for influence factors with spatial variability. The uncertainty stability analysis method was proposed by combining the finite element analysis and the limit equilibrium method. The instability risk ratio was calculated using the Monte Carlo simulation method and fuzzy random postprocessing. Results corroborate that the modeling approach is sound and that the calculation method is feasible.

  2. SPECIFIC METHOD OF RISK ASSESSMENT IN TOURISM ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Andreea ARMEAN

    2014-12-01

    Full Text Available The objective of this paper is to present an innovative method of risk assessment for tourism businesses. The contribution to literature is the novelty of this method of following paths: is an ante-factum assessment not post-factum; risk assessment is based on perception rather than results; is based on specific risks tourism enterprises not on the overall risks. Is an asset-research methodology and consists in generating its own method of risk assessment based on the ideas summarized from the literature studied. The aim established is tourism enterprises from Romania. The data necessary for the application of this method will result from applying to top level management of tourism enterprises, a questionnaire about risk perception. The results from this study will help identify and measure the risks specific to tourism enterprises. The applicability of the results is to improve risk management in these enterprises.

  3. Risk analysis of gravity dam instability using credibility theory Monte Carlo simulation model.

    Science.gov (United States)

    Xin, Cao; Chongshi, Gu

    2016-01-01

    Risk analysis of gravity dam stability involves complicated uncertainty in many design parameters and measured data. Stability failure risk ratio described jointly by probability and possibility has deficiency in characterization of influence of fuzzy factors and representation of the likelihood of risk occurrence in practical engineering. In this article, credibility theory is applied into stability failure risk analysis of gravity dam. Stability of gravity dam is viewed as a hybrid event considering both fuzziness and randomness of failure criterion, design parameters and measured data. Credibility distribution function is conducted as a novel way to represent uncertainty of influence factors of gravity dam stability. And combining with Monte Carlo simulation, corresponding calculation method and procedure are proposed. Based on a dam section, a detailed application of the modeling approach on risk calculation of both dam foundation and double sliding surfaces is provided. The results show that, the present method is feasible to be applied on analysis of stability failure risk for gravity dams. The risk assessment obtained can reflect influence of both sorts of uncertainty, and is suitable as an index value.

  4. Analysis of interactions among barriers in project risk management

    Science.gov (United States)

    Dandage, Rahul V.; Mantha, Shankar S.; Rane, Santosh B.; Bhoola, Vanita

    2018-03-01

    In the context of the scope, time, cost, and quality constraints, failure is not uncommon in project management. While small projects have 70% chances of success, large projects virtually have no chance of meeting the quadruple constraints. While there is no dearth of research on project risk management, the manifestation of barriers to project risk management is a less dwelt topic. The success of project management is oftentimes based on the understanding of barriers to effective risk management, application of appropriate risk management methodology, proactive leadership to avoid barriers, workers' attitude, adequate resources, organizational culture, and involvement of top management. This paper represents various risk categories and barriers to risk management in domestic and international projects through literature survey and feedback from project professionals. After analysing the various modelling methods used in project risk management literature, interpretive structural modelling (ISM) and MICMAC analysis have been used to analyse interactions among the barriers and prioritize them. The analysis indicates that lack of top management support, lack of formal training, and lack of addressing cultural differences are the high priority barriers, among many others.

  5. Ontological Analysis of the Project Risk Management Concept ‘Risk’

    Directory of Open Access Journals (Sweden)

    Uzulāns Juris

    2018-02-01

    Full Text Available The aim of the current research series is to examine the definitions of the concept ‘risk’ and analyze the concepts used in the definitions of ‘risk’ in the sources of these definitions in order to perform the ontological analysis of the concept of ‘risk’. Ontological and epistemological analysis of the concepts in the definition of the concept ‘risk’ was used to answer the question what ‘risk’ means in project management. This investigation represents a part of the research series where the ontological, epistemological and methodological analysis of project risk is performed with the aim to improve risk registers and risk management as a whole. In the previous studies the author analyzed the concept of ‘event’ that defines the content of the concept ‘risk’. The use of ‘event’ was analyzed in different sources to find out how the concept should be used. The ontological, epistemological and methodological analysis of the definitions of the concept ‘risk’ is the theoretical foundation for risk register creation because it is possible to create complete and understandable register for the participants of the project risk management process. The author believes that the conducted research helps establish confidence that ontological analysis is the method that together with the epistemological and methodological analysis provides opportunity to perform analysis of risk management sources aimed at improving risk management. The results of the study cannot be considered sufficient for deriving valid conclusions about project risk management and developing recommendations for improving risk management with regard to the content of the risk register. For valid conclusions and recommendations, a deeper research is needed which, first of all, would analyze a larger number of sources.

  6. RESEARCH ON RISK CLASSIFICATION METHOD OF ASSEMBLY OCCUPANCIES

    Directory of Open Access Journals (Sweden)

    Hao Yu

    2017-10-01

    Full Text Available Due to the densely population and mobility characteristics of the crowd, generally accidents happened in assembly occupancies will trigger a chain reaction, and then bring heavy casualties and property loss, and result disastrous consequences. In the context of safety regulation resources limited, building risk classification system of assembly occupancies is important for "scientific predicting, and hierarchical controlling” In this paper, a software with a graphical user interface is designed using MATLAB GUI to analyze and calculate risks of stampede accident caused by gathered crowds in the video. A velocity extraction method based on cross-correlation algorithm is adopted, and the risk characteristic parameters such as velocity variance is also applied. In this way, real-time analysis and early-warning for risks of stampede accident in time and space can be achieved. Also, the algorithm is applied to the surveillance video of the stampede in Shanghai and its feasibility is proved. Empirical research shows that, the assembly occupancies risk rating model built in this paper has good effectiveness, simplicity and practicability, applies to the government safety regulation and organization safety management, and can improve the safety situation of assembly occupancies effectively.

  7. Automated procedure for performing computer security risk analysis

    International Nuclear Information System (INIS)

    Smith, S.T.; Lim, J.J.

    1984-05-01

    Computers, the invisible backbone of nuclear safeguards, monitor and control plant operations and support many materials accounting systems. Our automated procedure to assess computer security effectiveness differs from traditional risk analysis methods. The system is modeled as an interactive questionnaire, fully automated on a portable microcomputer. A set of modular event trees links the questionnaire to the risk assessment. Qualitative scores are obtained for target vulnerability, and qualitative impact measures are evaluated for a spectrum of threat-target pairs. These are then combined by a linguistic algebra to provide an accurate and meaningful risk measure. 12 references, 7 figures

  8. Exergy based methods for economic and risk design optimization of energy systems: Application to a gas turbine

    International Nuclear Information System (INIS)

    Cassetti, G.; Rocco, M.V.; Colombo, E.

    2014-01-01

    Exergy based analyses are considered by the scientific community appropriate tools for the design and the performance evaluation and improvements of energy systems. Moreover, they are today recognized as proper instruments to assess economic, environmental and social externalities of energy systems. This paper presents the results of a study in which different exergy analysis methods are adopted to determine the optimal design configuration of a gas turbine operating in simple Joule Brayton cycle. Standard exergy and Thermoeconomic analyses are performed to identify the highest thermodynamic efficiency and minimum economic cost configurations of the system, while for the environmental analysis Authors propose an innovative method in which the exergy analysis is combined with a Risk Analysis. With this method the total risk associated to the system is used as objective function in the same way as monetary cost is for standard Thermoeconomic analysis. These three methods aims therefore to determine the optimal design configurations of the system with respect to their specific objective functions, respectively: exergy cost (J/J), monetary (exergoeconomic) cost (€/J) and risk (injured/J) of the product. Results lead to three different optimal design parameters for the system, according to the objective of each analysis procedure. - Highlights: • An original implementation of Thermoeconomic framework is proposed. • Standard Exergy and Thermoeconomic analysis are performed on a case study. • A new model using exergy as allocation criteria for Risk Analysis is performed. • Different optimal configurations are obtained and compared

  9. DORIAN, Bayes Method Plant Age Risk Analysis

    International Nuclear Information System (INIS)

    Atwood, C.L.

    2002-01-01

    1 - Description of program or function: DORIAN is an integrated package for performing Bayesian aging analysis of reliability data; e.g. for identifying trends in component failure rates and/or outage durations as a function of time. The user must specify several alternative hypothesized 'aging models' (i.e., possible trends) along prior probabilities indicating the subject probability that each trend is actually the correct one. DORIAN then uses component failure and/or repair data over time to update these prior probabilities and develop a posterior probability for each aging model, representing the probability that each model is the correct one in light of the observed data rather than a priori. Mean, median, and 5. and 95. percentile trends are also compiled from the posterior probabilities. 2 - Method of solution: DORIAN carries out a Bayesian analysis of failure data and a prior distribution on a time-dependent failure rate to obtain a posterior distribution on the failure rate. The form of the time-dependent failure rate is arbitrary, because DORIAN approximates the form by a step-function, constant within specified time intervals. Similarly, the parameters may have any prior distribution, because DORIAN uses a discrete distribution to approximate this. Likewise, the database file produced by DORIAN approximates the entire range of possible failure rates or outage durations developed by means of a discrete probability distribution containing no more than 20 distinct values with their probabilities. 3 - Restrictions on the complexity of the problem: Prior distribution is discrete with up to 25 values. Up to 60 times are accommodated in the discrete time history

  10. Source modelling in seismic risk analysis for nuclear power plants

    International Nuclear Information System (INIS)

    Yucemen, M.S.

    1978-12-01

    The proposed probabilistic procedure provides a consistent method for the modelling, analysis and updating of uncertainties that are involved in the seismic risk analysis for nuclear power plants. The potential earthquake activity zones are idealized as point, line or area sources. For these seismic source types, expressions to evaluate their contribution to seismic risk are derived, considering all the possible site-source configurations. The seismic risk at a site is found to depend not only on the inherent randomness of the earthquake occurrences with respect to magnitude, time and space, but also on the uncertainties associated with the predicted values of the seismic and geometric parameters, as well as the uncertainty in the attenuation model. The uncertainty due to the attenuation equation is incorporated into the analysis through the use of random correction factors. The influence of the uncertainty resulting from the insufficient information on the seismic parameters and source geometry is introduced into the analysis by computing a mean risk curve averaged over the various alternative assumptions on the parameters and source geometry. Seismic risk analysis is carried for the city of Denizli, which is located in the seismically most active zone of Turkey. The second analysis is for Akkuyu

  11. COGNITIVE MODELING AS A METHOD OF QUALITATIVE ANALYSIS OF IT PROJECTS

    Directory of Open Access Journals (Sweden)

    Інна Ігорівна ОНИЩЕНКО

    2016-03-01

    Full Text Available The example project implementing automated CRM-system demonstrated the possibility and features of cognitive modeling in the qualitative analysis of project risks to determine their additional features. Proposed construction of cognitive models of project risks in information technology within the qualitative risk analysis, additional assessments as a method of ranking risk to characterize the relationship between them. The proposed cognitive model reflecting the relationship between the risk of IT project to assess the negative and the positive impact of certain risks for the remaining risks of project implementation of the automated CRM-system. The ability to influence the risk of a fact of other project risks can increase the priority of risk with low impact on results due to its relationship with other project risks.

  12. Operational Implementation of a Pc Uncertainty Construct for Conjunction Assessment Risk Analysis

    Science.gov (United States)

    Newman, Lauri K.; Hejduk, Matthew D.; Johnson, Lauren C.

    2016-01-01

    Earlier this year the NASA Conjunction Assessment and Risk Analysis (CARA) project presented the theoretical and algorithmic aspects of a method to include the uncertainties in the calculation inputs when computing the probability of collision (Pc) between two space objects, principally uncertainties in the covariances and the hard-body radius. The output of this calculation approach is to produce rather than a single Pc value an entire probability density function that will represent the range of possible Pc values given the uncertainties in the inputs and bring CA risk analysis methodologies more in line with modern risk management theory. The present study provides results from the exercise of this method against an extended dataset of satellite conjunctions in order to determine the effect of its use on the evaluation of conjunction assessment (CA) event risk posture. The effects are found to be considerable: a good number of events are downgraded from or upgraded to a serious risk designation on the basis of consideration of the Pc uncertainty. The findings counsel the integration of the developed methods into NASA CA operations.

  13. Dealing with uncertainty and pursuing superior technology options in risk management-The inherency risk analysis

    International Nuclear Information System (INIS)

    Helland, Aasgeir

    2009-01-01

    Current regulatory systems focus on the state of scientific evidence as the predominant factor for how to handle risks to human health and the environment. However, production and assessment of risk information are costly and time-consuming, and firms have an intrinsic disincentive to produce and distribute information about risks of their products as this could endanger their production opportunities and sales. An emphasis on more or better science may result in insufficient thought and attention going into the exploration of technology alternatives, and that risk management policies miss out on the possible achievement of a more favorable set of consequences. In this article, a method is proposed that combines risk assessment with the search for alternative technological options as a part of the risk management procedure. The method proposed is the inherency risk analysis where the first stage focuses on the original agent subject to investigation, the second stage focuses on identifying technological options whereas the third stage reviews the different alternatives, searching for the most attractive tradeoffs between costs and inherent safety. This is then used as a fundament for deciding which technology option to pursue. This method aims at providing a solution-focused, systematic technology-based approach for addressing and setting priorities for environmental problems. By combining risk assessment with a structured approach to identify superior technology options within a risk management system, the result could very well be a win-win situation for both company and the environment.

  14. Project Portfolio Risk Identification and Analysis, Considering Project Risk Interactions and Using Bayesian Networks

    Directory of Open Access Journals (Sweden)

    Foroogh Ghasemi

    2018-05-01

    Full Text Available An organization’s strategic objectives are accomplished through portfolios. However, the materialization of portfolio risks may affect a portfolio’s sustainable success and the achievement of those objectives. Moreover, project interdependencies and cause–effect relationships between risks create complexity for portfolio risk analysis. This paper presents a model using Bayesian network (BN methodology for modeling and analyzing portfolio risks. To develop this model, first, portfolio-level risks and risks caused by project interdependencies are identified. Then, based on their cause–effect relationships all portfolio risks are organized in a BN. Conditional probability distributions for this network are specified and the Bayesian networks method is used to estimate the probability of portfolio risk. This model was applied to a portfolio of a construction company located in Iran and proved effective in analyzing portfolio risk probability. Furthermore, the model provided valuable information for selecting a portfolio’s projects and making strategic decisions.

  15. Semi-Competing Risks Data Analysis: Accounting for Death as a Competing Risk When the Outcome of Interest Is Nonterminal.

    Science.gov (United States)

    Haneuse, Sebastien; Lee, Kyu Ha

    2016-05-01

    Hospital readmission is a key marker of quality of health care. Notwithstanding its widespread use, however, it remains controversial in part because statistical methods used to analyze readmission, primarily logistic regression and related models, may not appropriately account for patients who die before experiencing a readmission event within the time frame of interest. Toward resolving this, we describe and illustrate the semi-competing risks framework, which refers to the general setting where scientific interest lies with some nonterminal event (eg, readmission), the occurrence of which is subject to a terminal event (eg, death). Although several statistical analysis methods have been proposed for semi-competing risks data, we describe in detail the use of illness-death models primarily because of their relation to well-known methods for survival analysis and the availability of software. We also describe and consider in detail several existing approaches that could, in principle, be used to analyze semi-competing risks data, including composite end point and competing risks analyses. Throughout we illustrate the ideas and methods using data on N=49 763 Medicare beneficiaries hospitalized between 2011 and 2013 with a principle discharge diagnosis of heart failure. © 2016 American Heart Association, Inc.

  16. Risk-based prioritization method for the classification of groundwater pesticide pollution from agricultural regions.

    Science.gov (United States)

    Yang, Yu; Lian, Xin-Ying; Jiang, Yong-Hai; Xi, Bei-Dou; He, Xiao-Song

    2017-11-01

    Agricultural regions are a significant source of groundwater pesticide pollution. To ensure that agricultural regions with a significantly high risk of groundwater pesticide contamination are properly managed, a risk-based ranking method related to groundwater pesticide contamination is needed. In the present paper, a risk-based prioritization method for the classification of groundwater pesticide pollution from agricultural regions was established. The method encompasses 3 phases, including indicator selection, characterization, and classification. In the risk ranking index system employed here, 17 indicators involving the physicochemical properties, environmental behavior characteristics, pesticide application methods, and inherent vulnerability of groundwater in the agricultural region were selected. The boundary of each indicator was determined using K-means cluster analysis based on a survey of a typical agricultural region and the physical and chemical properties of 300 typical pesticides. The total risk characterization was calculated by multiplying the risk value of each indicator, which could effectively avoid the subjectivity of index weight calculation and identify the main factors associated with the risk. The results indicated that the risk for groundwater pesticide contamination from agriculture in a region could be ranked into 4 classes from low to high risk. This method was applied to an agricultural region in Jiangsu Province, China, and it showed that this region had a relatively high risk for groundwater contamination from pesticides, and that the pesticide application method was the primary factor contributing to the relatively high risk. The risk ranking method was determined to be feasible, valid, and able to provide reference data related to the risk management of groundwater pesticide pollution from agricultural regions. Integr Environ Assess Manag 2017;13:1052-1059. © 2017 SETAC. © 2017 SETAC.

  17. Comparison of concepts in easy-to-use methods for MSD risk assessment.

    Science.gov (United States)

    Roman-Liu, Danuta

    2014-05-01

    This article presents a comparative analysis of easy-to-use methods for assessing musculoskeletal load and the risk for developing musculoskeletal disorders. In all such methods, assessment of load consists in defining input data, the procedure and the system of assessment. This article shows what assessment steps the methods have in common; it also shows how those methods differ in each step. In addition, the methods are grouped according to their characteristic features. The conclusion is that the concepts of assessing risk in different methods can be used to develop solutions leading to a comprehensive method appropriate for all work tasks and all parts of the body. However, studies are necessary to verify the accepted premises and to introduce some standardization that would make consolidation possible. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  18. Value-at-Risk analysis using ARMAX GARCHX approach for estimating risk of banking subsector stock return’s

    Science.gov (United States)

    Dewi Ratih, Iis; Sutijo Supri Ulama, Brodjol; Prastuti, Mike

    2018-03-01

    Value at Risk (VaR) is one of the statistical methods used to measure market risk by estimating the worst losses in a given time period and level of confidence. The accuracy of this measuring tool is very important in determining the amount of capital that must be provided by the company to cope with possible losses. Because there is a greater losses to be faced with a certain degree of probability by the greater risk. Based on this, VaR calculation analysis is of particular concern to researchers and practitioners of the stock market to be developed, thus getting more accurate measurement estimates. In this research, risk analysis of stocks in four banking sub-sector, Bank Rakyat Indonesia, Bank Mandiri, Bank Central Asia and Bank Negara Indonesia will be done. Stock returns are expected to be influenced by exogenous variables, namely ICI and exchange rate. Therefore, in this research, stock risk estimation are done by using VaR ARMAX-GARCHX method. Calculating the VaR value with the ARMAX-GARCHX approach using window 500 gives more accurate results. Overall, Bank Central Asia is the only bank had the estimated maximum loss in the 5% quantile.

  19. Methods and tools to support real time risk-based flood forecasting - a UK pilot application

    Directory of Open Access Journals (Sweden)

    Brown Emma

    2016-01-01

    Full Text Available Flood managers have traditionally used probabilistic models to assess potential flood risk for strategic planning and non-operational applications. Computational restrictions on data volumes and simulation times have meant that information on the risk of flooding has not been available for operational flood forecasting purposes. In practice, however, the operational flood manager has probabilistic questions to answer, which are not completely supported by the outputs of traditional, deterministic flood forecasting systems. In a collaborative approach, HR Wallingford and Deltares have developed methods, tools and techniques to extend existing flood forecasting systems with elements of strategic flood risk analysis, including probabilistic failure analysis, two dimensional flood spreading simulation and the analysis of flood impacts and consequences. This paper presents the results of the application of these new operational flood risk management tools to a pilot catchment in the UK. It discusses the problems of performing probabilistic flood risk assessment in real time and how these have been addressed in this study. It also describes the challenges of the communication of risk to operational flood managers and to the general public, and how these new methods and tools can provide risk-based supporting evidence to assist with this process.

  20. Risk analysis applied to the production of generators of Molybdenum-99/Technetium-99m

    International Nuclear Information System (INIS)

    Rodriguez, Daniel; Torres, Antonio; Henriquez, Jorge R.; Soria, Miguel A.; Ayra, Fernando E.

    2017-01-01

    Radionuclide Technetium-99m is the most used today, so that their production is vital to the branches of health and the economy of any country. Cuba currently producing generators for obtaining this radionuclide, and it is produce at the Center of Isotopes. Risk assessments of radiological hazard installations are a regulatory requirement in Cuba. Although there are several qualitative or quantitative methods to perform these studies, the existence of basis risk starting and analysis codes and simplicity of use has been privileged the risk matrix as a preferred semi-quantitative method. The investigation presents the application, for the first time, of this method on a complex installation with radiological hazard in Cuba. Using the SECURE - MR Ver. 2.0 code detailed risk analysis of the practice carried out, resulting in three accidental sequences with high-risk level and determining the importance of reducers and barriers related with human factors associated to sufficiency and personnel training. Among the derived applications are reported the novelties analysis capabilities and possibilities of risk monitoring. The risk model developed for the production process of generators of Molybdenum-99/Technetium-99m joined with capabilities review, analysis and documentation provided by the tool, allow obtaining a completely and coherent document with the model, which constitutes a valuable basis for understanding the safety of the installation knowledge. (author)

  1. Risk analysis applied to the production of generators of Molybdenum-99/Technetium-99m

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Daniel; Torres, Antonio; Henriquez, Jorge R.; Soria, Miguel A.; Ayra, Fernando E., E-mail: danivd1188@gmail.com, E-mail: rjorge@ufpe.br, E-mail: masguevara@centis.edu.cu, E-mail: feayra@centis.cu [Universidade Federal de Pernambuco (DEMEC/UFPE), Recife, PE (Brazil). Departamento de Engenharia Mecanica; Departamento de Ingenieria Nuclear, Instituto Superior de Tecnologias y Ciencias Aplicadas (DIN/InSTEC), La Habana (Cuba); Departamento de Proteccion Radiologica, Centro de Isotopos (DPR/CENTIS), La Habana (Cuba)

    2017-11-01

    Radionuclide Technetium-99m is the most used today, so that their production is vital to the branches of health and the economy of any country. Cuba currently producing generators for obtaining this radionuclide, and it is produce at the Center of Isotopes. Risk assessments of radiological hazard installations are a regulatory requirement in Cuba. Although there are several qualitative or quantitative methods to perform these studies, the existence of basis risk starting and analysis codes and simplicity of use has been privileged the risk matrix as a preferred semi-quantitative method. The investigation presents the application, for the first time, of this method on a complex installation with radiological hazard in Cuba. Using the SECURE - MR Ver. 2.0 code detailed risk analysis of the practice carried out, resulting in three accidental sequences with high-risk level and determining the importance of reducers and barriers related with human factors associated to sufficiency and personnel training. Among the derived applications are reported the novelties analysis capabilities and possibilities of risk monitoring. The risk model developed for the production process of generators of Molybdenum-99/Technetium-99m joined with capabilities review, analysis and documentation provided by the tool, allow obtaining a completely and coherent document with the model, which constitutes a valuable basis for understanding the safety of the installation knowledge. (author)

  2. Risk analysis of heat recovery steam generator with semi quantitative risk based inspection API 581

    Science.gov (United States)

    Prayogo, Galang Sandy; Haryadi, Gunawan Dwi; Ismail, Rifky; Kim, Seon Jin

    2016-04-01

    Corrosion is a major problem that most often occurs in the power plant. Heat recovery steam generator (HRSG) is an equipment that has a high risk to the power plant. The impact of corrosion damage causing HRSG power plant stops operating. Furthermore, it could be threaten the safety of employees. The Risk Based Inspection (RBI) guidelines by the American Petroleum Institute (API) 58 has been used to risk analysis in the HRSG 1. By using this methodology, the risk that caused by unexpected failure as a function of the probability and consequence of failure can be estimated. This paper presented a case study relating to the risk analysis in the HRSG, starting with a summary of the basic principles and procedures of risk assessment and applying corrosion RBI for process industries. The risk level of each HRSG equipment were analyzed: HP superheater has a medium high risk (4C), HP evaporator has a medium-high risk (4C), and the HP economizer has a medium risk (3C). The results of the risk assessment using semi-quantitative method of standard API 581 based on the existing equipment at medium risk. In the fact, there is no critical problem in the equipment components. Damage mechanisms were prominent throughout the equipment is thinning mechanism. The evaluation of the risk approach was done with the aim of reducing risk by optimizing the risk assessment activities.

  3. Risk analysis of heat recovery steam generator with semi quantitative risk based inspection API 581

    International Nuclear Information System (INIS)

    Prayogo, Galang Sandy; Haryadi, Gunawan Dwi; Ismail, Rifky; Kim, Seon Jin

    2016-01-01

    Corrosion is a major problem that most often occurs in the power plant. Heat recovery steam generator (HRSG) is an equipment that has a high risk to the power plant. The impact of corrosion damage causing HRSG power plant stops operating. Furthermore, it could be threaten the safety of employees. The Risk Based Inspection (RBI) guidelines by the American Petroleum Institute (API) 58 has been used to risk analysis in the HRSG 1. By using this methodology, the risk that caused by unexpected failure as a function of the probability and consequence of failure can be estimated. This paper presented a case study relating to the risk analysis in the HRSG, starting with a summary of the basic principles and procedures of risk assessment and applying corrosion RBI for process industries. The risk level of each HRSG equipment were analyzed: HP superheater has a medium high risk (4C), HP evaporator has a medium-high risk (4C), and the HP economizer has a medium risk (3C). The results of the risk assessment using semi-quantitative method of standard API 581 based on the existing equipment at medium risk. In the fact, there is no critical problem in the equipment components. Damage mechanisms were prominent throughout the equipment is thinning mechanism. The evaluation of the risk approach was done with the aim of reducing risk by optimizing the risk assessment activities.

  4. Risk analysis of heat recovery steam generator with semi quantitative risk based inspection API 581

    Energy Technology Data Exchange (ETDEWEB)

    Prayogo, Galang Sandy, E-mail: gasandylang@live.com; Haryadi, Gunawan Dwi; Ismail, Rifky [Department of Mechanical Engineering, Diponegoro University, Semarang (Indonesia); Kim, Seon Jin [Department of Mechanical & Automotive Engineering of Pukyong National University (Korea, Republic of)

    2016-04-19

    Corrosion is a major problem that most often occurs in the power plant. Heat recovery steam generator (HRSG) is an equipment that has a high risk to the power plant. The impact of corrosion damage causing HRSG power plant stops operating. Furthermore, it could be threaten the safety of employees. The Risk Based Inspection (RBI) guidelines by the American Petroleum Institute (API) 58 has been used to risk analysis in the HRSG 1. By using this methodology, the risk that caused by unexpected failure as a function of the probability and consequence of failure can be estimated. This paper presented a case study relating to the risk analysis in the HRSG, starting with a summary of the basic principles and procedures of risk assessment and applying corrosion RBI for process industries. The risk level of each HRSG equipment were analyzed: HP superheater has a medium high risk (4C), HP evaporator has a medium-high risk (4C), and the HP economizer has a medium risk (3C). The results of the risk assessment using semi-quantitative method of standard API 581 based on the existing equipment at medium risk. In the fact, there is no critical problem in the equipment components. Damage mechanisms were prominent throughout the equipment is thinning mechanism. The evaluation of the risk approach was done with the aim of reducing risk by optimizing the risk assessment activities.

  5. New challenges on uncertainty propagation assessment of flood risk analysis

    Science.gov (United States)

    Martins, Luciano; Aroca-Jiménez, Estefanía; Bodoque, José M.; Díez-Herrero, Andrés

    2016-04-01

    Natural hazards, such as floods, cause considerable damage to the human life, material and functional assets every year and around the World. Risk assessment procedures has associated a set of uncertainties, mainly of two types: natural, derived from stochastic character inherent in the flood process dynamics; and epistemic, that are associated with lack of knowledge or the bad procedures employed in the study of these processes. There are abundant scientific and technical literature on uncertainties estimation in each step of flood risk analysis (e.g. rainfall estimates, hydraulic modelling variables); but very few experience on the propagation of the uncertainties along the flood risk assessment. Therefore, epistemic uncertainties are the main goal of this work, in particular,understand the extension of the propagation of uncertainties throughout the process, starting with inundability studies until risk analysis, and how far does vary a proper analysis of the risk of flooding. These methodologies, such as Polynomial Chaos Theory (PCT), Method of Moments or Monte Carlo, are used to evaluate different sources of error, such as data records (precipitation gauges, flow gauges...), hydrologic and hydraulic modelling (inundation estimation), socio-demographic data (damage estimation) to evaluate the uncertainties propagation (UP) considered in design flood risk estimation both, in numerical and cartographic expression. In order to consider the total uncertainty and understand what factors are contributed most to the final uncertainty, we used the method of Polynomial Chaos Theory (PCT). It represents an interesting way to handle to inclusion of uncertainty in the modelling and simulation process. PCT allows for the development of a probabilistic model of the system in a deterministic setting. This is done by using random variables and polynomials to handle the effects of uncertainty. Method application results have a better robustness than traditional analysis

  6. Environmental risk analysis

    International Nuclear Information System (INIS)

    Lima-e-Silva, Pedro Paulo de

    1996-01-01

    The conventional Risk Analysis (RA) relates usually a certain undesired event frequency with its consequences. Such technique is used nowadays in Brazil to analyze accidents and their consequences strictly under the human approach, valuing loss of human equipment, human structures and human lives, without considering the damage caused to natural resources that keep life possible on Earth. This paradigm was developed primarily because of the Homo sapiens' lack of perception upon the natural web needed to sustain his own life. In reality, the Brazilian professionals responsible today for licensing, auditing and inspecting environmental aspects of human activities face huge difficulties in making technical specifications and procedures leading to acceptable levels of impact, furthermore considering the intrinsic difficulties to define those levels. Therefore, in Brazil the RA technique is a weak tool for licensing for many reasons, and of them are its short scope (only accident considerations) and wrong a paradigm (only human direct damages). A paper from the author about the former was already proposed to the 7th International Conference on Environmetrics, past July'96, USP-SP. This one discusses the extension of the risk analysis concept to take into account environmental consequences, transforming the conventional analysis into a broader methodology named here as Environmental Risk Analysis. (author)

  7. Practical Methods for Information Security Risk Management

    Directory of Open Access Journals (Sweden)

    Cristian AMANCEI

    2011-01-01

    Full Text Available The purpose of this paper is to present some directions to perform the risk man-agement for information security. The article follows to practical methods through question-naire that asses the internal control, and through evaluation based on existing controls as part of vulnerability assessment. The methods presented contains all the key elements that concurs in risk management, through the elements proposed for evaluation questionnaire, list of threats, resource classification and evaluation, correlation between risks and controls and residual risk computation.

  8. Indoor Soiling Method and Outdoor Statistical Risk Analysis of Photovoltaic Power Plants

    Science.gov (United States)

    Rajasekar, Vidyashree

    This is a two-part thesis. Part 1 presents an approach for working towards the development of a standardized artificial soiling method for laminated photovoltaic (PV) cells or mini-modules. Construction of an artificial chamber to maintain controlled environmental conditions and components/chemicals used in artificial soil formulation is briefly explained. Both poly-Si mini-modules and a single cell mono-Si coupons were soiled and characterization tests such as I-V, reflectance and quantum efficiency (QE) were carried out on both soiled, and cleaned coupons. From the results obtained, poly-Si mini-modules proved to be a good measure of soil uniformity, as any non-uniformity present would not result in a smooth curve during I-V measurements. The challenges faced while executing reflectance and QE characterization tests on poly-Si due to smaller size cells was eliminated on the mono-Si coupons with large cells to obtain highly repeatable measurements. This study indicates that the reflectance measurements between 600-700 nm wavelengths can be used as a direct measure of soil density on the modules. Part 2 determines the most dominant failure modes of field aged PV modules using experimental data obtained in the field and statistical analysis, FMECA (Failure Mode, Effect, and Criticality Analysis). The failure and degradation modes of about 744 poly-Si glass/polymer frameless modules fielded for 18 years under the cold-dry climate of New York was evaluated. Defect chart, degradation rates (both string and module levels) and safety map were generated using the field measured data. A statistical reliability tool, FMECA that uses Risk Priority Number (RPN) is used to determine the dominant failure or degradation modes in the strings and modules by means of ranking and prioritizing the modes. This study on PV power plants considers all the failure and degradation modes from both safety and performance perspectives. The indoor and outdoor soiling studies were jointly

  9. Analysis of risk factors for persistent infection of asymptomatic women with high-risk human papilloma virus.

    Science.gov (United States)

    Shi, Nianmin; Lu, Qiang; Zhang, Jiao; Li, Li; Zhang, Junnan; Zhang, Fanglei; Dong, Yanhong; Zhang, Xinyue; Zhang, Zheng; Gao, Wenhui

    2017-06-03

    This study aims to prevent persistentinfection, reduce the incidence of cervical cancer, and improve women's health by understanding the theoretical basis of the risk factors for continuous infection of asymptomatic women with high-risk human papilloma virus (HPV) strains via information collected, which includes the persistent infection rate and the most prevalent HPV strain types of high risk to asymptomatic women in the high-risk area of cervical cancer in Linfen, Shanxi Province. Based on the method of cluster sampling, locations were chosen from the industrial county and agricultural county of Linfen, Shanxi Province, namely the Xiangfen and Quwo counties. Use of the convenience sampling (CS) method enables the identification of women who have sex but without symptoms of abnormal cervix for analyzing risk factors of HPV-DNA detection and performing a retrospective questionnaire survey in these 2 counties. Firstly, cervical exfoliated cell samples were collected for thin-layer liquid-based cytology test (TCT), and simultaneously testing high-risk type HPV DNA, then samples with positive testing results were retested to identify the infected HPV types. The 6-month period of testing was done to derive the 6-month persistent infection rate. The retrospective survey included concepts addressed in the questionnaire: basic situation of the research objects, menstrual history, marital status, pregnancy history, sexual habits and other aspects. The questionnaire was divided into a case group and a comparison group, which are based on the high-risk HPV-DNA testing result to ascertain whether or not there is persistent infection. Statistical analysis employed Epidate3.1 software for date entry, SPSS17.0 for date statistical analysis. Select statistic charts, Chi-Square Analysis, single-factor analysis and multivariate Logistic regression analysis to analyze the protective factors and risk factors of high-risk HPV infection. Risk factors are predicted by using the

  10. Risk and safety analysis of nuclear systems

    CERN Document Server

    Lee, John C

    2011-01-01

    The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear a

  11. External event analysis methods for NUREG-1150

    International Nuclear Information System (INIS)

    Bohn, M.P.; Lambright, J.A.

    1989-01-01

    The US Nuclear Regulatory Commission is sponsoring probabilistic risk assessments of six operating commercial nuclear power plants as part of a major update of the understanding of risk as provided by the original WASH-1400 risk assessments. In contrast to the WASH-1400 studies, at least two of the NUREG-1150 risk assessments will include an analysis of risks due to earthquakes, fires, floods, etc., which are collectively known as eternal events. This paper summarizes the methods to be used in the external event analysis for NUREG-1150 and the results obtained to date. The two plants for which external events are being considered are Surry and Peach Bottom, a PWR and BWR respectively. The external event analyses (through core damage frequency calculations) were completed in June 1989, with final documentation available in September. In contrast to most past external event analyses, wherein rudimentary systems models were developed reflecting each external event under consideration, the simplified NUREG-1150 analyses are based on the availability of the full internal event PRA systems models (event trees and fault trees) and make use of extensive computer-aided screening to reduce them to sequence cut sets important to each external event. This provides two major advantages in that consistency and scrutability with respect to the internal event analysis is achieved, and the full gamut of random and test/maintenance unavailabilities are automatically included, while only those probabilistically important survive the screening process. Thus, full benefit of the internal event analysis is obtained by performing the internal and external event analyses sequentially

  12. ANALYSIS MODELS OF THE BANKRUPTCY RISK IN ROMANIA’S ENERGY SECTOR

    Directory of Open Access Journals (Sweden)

    MIRON VASILE CRISTIAN IOACHIM

    2015-12-01

    Full Text Available The risk, as a concept found in the economic sphere of business represents an analysis area often approached by researchers from the finance and accounting field. Although it is often seen, along with cost-effectiveness and value, as a fundamental element of finance (Stancu, I., 2007, the risk has often facets that make it useful also in analyzing other sides of the economic sphere of business, such as financial position and economic performance of it. From these meanings, we believe that the most suitable for this purpose is the one through which it is analyzed the ability of an entity to avoid bankruptcy. The present study has as main objectives the presentation of bankruptcy risk of an entity from a theoretical point of view and the analysis (from an empirical and comparative point of view through the scoring method of the implementation of various models for analyzing the risk of bankruptcy (Altman, Conan-holder, Taffler, Robertson in Romania’s energy sector, in order to issue an opinion regarding the optimal method for analyzing the bankruptcy risk in the energy sector. The results show that there are significant differences regarding the analysis of the bankruptcy risk through the appliction of different models, proposing the Conan-Holder model as the most appropriate for this sector.

  13. Predicting high risk births with contraceptive prevalence and contraceptive method-mix in an ecologic analysis

    Directory of Open Access Journals (Sweden)

    Jamie Perin

    2017-11-01

    Full Text Available Abstract Background Increased contraceptive use has been associated with a decrease in high parity births, births that occur close together in time, and births to very young or to older women. These types of births are also associated with high risk of under-five mortality. Previous studies have looked at the change in the level of contraception use and the average change in these types of high-risk births. We aim to predict the distribution of births in a specific country when there is a change in the level and method of modern contraception. Methods We used data from full birth histories and modern contraceptive use from 207 nationally representative Demographic and Health Surveys covering 71 countries to describe the distribution of births in each survey based on birth order, preceding birth space, and mother’s age at birth. We estimated the ecologic associations between the prevalence and method-mix of modern contraceptives and the proportion of births in each category. Hierarchical modelling was applied to these aggregated cross sectional proportions, so that random effects were estimated for countries with multiple surveys. We use these results to predict the change in type of births associated with scaling up modern contraception in three different scenarios. Results We observed marked differences between regions, in the absolute rates of contraception, the types of contraceptives in use, and in the distribution of type of birth. Contraceptive method-mix was a significant determinant of proportion of high-risk births, especially for birth spacing, but also for mother’s age and parity. Increased use of modern contraceptives is especially predictive of reduced parity and more births with longer preceding space. However, increased contraception alone is not associated with fewer births to women younger than 18 years or a decrease in short-spaced births. Conclusions Both the level and the type of contraception are important factors in

  14. Analysis of coastal protection under rising flood risk

    Directory of Open Access Journals (Sweden)

    Megan J. Lickley

    2014-01-01

    Full Text Available Infrastructure located along the U.S. Atlantic and Gulf coasts is exposed to rising risk of flooding from sea level rise, increasing storm surge, and subsidence. In these circumstances coastal management commonly based on 100-year flood maps assuming current climatology is no longer adequate. A dynamic programming cost–benefit analysis is applied to the adaptation decision, illustrated by application to an energy facility in Galveston Bay. Projections of several global climate models provide inputs to estimates of the change in hurricane and storm surge activity as well as the increase in sea level. The projected rise in physical flood risk is combined with estimates of flood damage and protection costs in an analysis of the multi-period nature of adaptation choice. The result is a planning method, using dynamic programming, which is appropriate for investment and abandonment decisions under rising coastal risk.

  15. Complex risk analysis for loss of electric power in liquid metal nuclear reactor by system dynamics (SD) method

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Tae Ho [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering

    2012-07-15

    The power stabilization of the nuclear power plants (NPPs) is investigated in the aspect of the liquid metal coolant. The quantification of the risk analysis is performed by the system dynamics (SD) method which is processed by the feedback and accumulation complex algorithms. The Vensim software package is used for the simulations, which is supported by the Monte-Carlo method. There are 2 kinds of considerations as the economic and safety properties. The result shows the stability of the operations when the power can be decided. This shows the higher efficiency of the reactor. The failure frequency is 16/60 = 27%. In the event of Power Stabilized, the failure event is in the quite lower frequency rate. The commercial use of the reactor is important in the operations. (orig.)

  16. Component of the risk analysis

    International Nuclear Information System (INIS)

    Martinez, I.; Campon, G.

    2013-01-01

    The power point presentation reviews issues like analysis of risk (Codex), management risk, preliminary activities manager, relationship between government and industries, microbiological danger and communication of risk

  17. The application of risk analysis methods for the evaluation of the KBS-II encapsulation plant

    International Nuclear Information System (INIS)

    Olshausen, K.D.

    1981-01-01

    Following a short description of the process of risk analysis and a definition of the objective, the encapsulation plant is described to the extent required. For certain systems, e.g. ventilation, the data was insufficient and some assumptions had to be made. A number of critical events were identified, and one of these, the release of radioactive substances through the ventilation system, was chosen for more detailed analysis. The plant was regarded as a system of barriers to which the substance had to be transported (TO), and through which the substance had to penetrate (THROUGH). The procedure is therefore called the TO/THROUGH method. Detailed fault trees with 'release via ventilation' as the critical event (top event) were drawn. As a numerical example two initiating events from the KBS-II report were treated; 1. degassing of previously damaged pins (2 per year); 2. fall of a fully loaded rack (1 per year). If either of these events coincides with failure of the ventilation system radioactive dust (aerosol) can be released to the atmosphere. The probability for this and the amount of radioactivity released are estimated. (JIW)

  18. Quantitative risk analysis for landslides ‒ Examples from Bíldudalur, NW-Iceland

    Directory of Open Access Journals (Sweden)

    R. Bell

    2004-01-01

    Full Text Available Although various methods to carry out quantitative landslide risk analyses are available, applications are still rare and mostly dependent on the occurrence of disasters. In Iceland, two catastrophic snow avalanches killed 34 people in 1995. As a consequence the Ministry of the Environment issued a new regulation on hazard zoning due to snow avalanches and landslides in 2000, which aims to prevent people living or working within the areas most at risk until 2010. The regulation requires to carry out landslide and snow avalanche risk analyses, however, a method to calculate landslide risk adopted to Icelandic conditions is still missing. Therefore, the ultimate goal of this study is to develop such a method for landslides, focussing on debris flows and rock falls and to test it in Bíldudalur, NW-Iceland. Risk analysis, beside risk evaluation and risk management, is part of the holistic concept of risk assessment. Within this study, risk analysis is considered only, focussing on the risks to life. To calculate landslide risk, the spatial and temporal probability of occurrence of potential damaging events, as well as the distribution of the elements at risk in space and time, considering also changing vulnerabilities, must be determined. Within this study, a new raster-based approach is developed. Thus, all existent vector data are transferred into raster data using a resolution of 1m x 1m. The specific attribute data are attributed to the grid cells, resulting in specific raster data layers for each input parameter. The calculation of the landslide risk follows a function of the input parameters hazard, damage potential of the elements at risk, vulnerability, probability of the spatial impact, probability of the temporal impact and probability of the seasonal occurrence. Finally, results are upscaled to a resolution of 20m x 20m and are presented as individual risk to life and object risk to life for each process. Within the quantitative

  19. Credit Risk Evaluation : Modeling - Analysis - Management

    OpenAIRE

    Wehrspohn, Uwe

    2002-01-01

    An analysis and further development of the building blocks of modern credit risk management: -Definitions of default -Estimation of default probabilities -Exposures -Recovery Rates -Pricing -Concepts of portfolio dependence -Time horizons for risk calculations -Quantification of portfolio risk -Estimation of risk measures -Portfolio analysis and portfolio improvement -Evaluation and comparison of credit risk models -Analytic portfolio loss distributions The thesis contributes to the evaluatio...

  20. Applying data envelopment analysis to preventive medicine: a novel method for constructing a personalized risk model of obesity.

    Directory of Open Access Journals (Sweden)

    Hiroto Narimatsu

    Full Text Available Data envelopment analysis (DEA is a method of operations research that has not yet been applied in the field of obesity research. However, DEA might be used to evaluate individuals' susceptibility to obesity, which could help establish effective risk models for the onset of obesity. Therefore, we conducted this study to evaluate the feasibility of applying DEA to predict obesity, by calculating efficiency scores and evaluating the usefulness of risk models. In this study, we evaluated data from the Takahata study, which was a population-based cohort study (with a follow-up study of Japanese people who are >40 years old. For our analysis, we used the input-oriented Charnes-Cooper-Rhodes model of DEA, and defined the decision-making units (DMUs as individual subjects. The inputs were defined as (1 exercise (measured as calories expended and (2 the inverse of food intake (measured as calories ingested. The output was defined as the inverse of body mass index (BMI. Using the β coefficients for the participants' single nucleotide polymorphisms, we then calculated their genetic predisposition score (GPS. Both efficiency scores and GPS were available for 1,620 participants from the baseline survey, and for 708 participants from the follow-up survey. To compare the strengths of the associations, we used models of multiple linear regressions. To evaluate the effects of genetic factors and efficiency score on body mass index (BMI, we used multiple linear regression analysis, with BMI as the dependent variable, GPS and efficiency scores as the explanatory variables, and several demographic controls, including age and sex. Our results indicated that all factors were statistically significant (p < 0.05, with an adjusted R2 value of 0.66. Therefore, it is possible to use DEA to predict environmentally driven obesity, and thus to establish a well-fitted model for risk of obesity.

  1. Adaptive Failure Identification for Healthcare Risk Analysis and Its Application on E-Healthcare

    Directory of Open Access Journals (Sweden)

    Kuo-Chung Chu

    2014-01-01

    Full Text Available To satisfy the requirement for diverse risk preferences, we propose a generic risk priority number (GRPN function that assigns a risk weight to each parameter such that they represent individual organization/department/process preferences for the parameters. This research applies GRPN function-based model to differentiate the types of risk, and primary data are generated through simulation. We also conduct sensitivity analysis on correlation and regression to compare it with the traditional RPN (TRPN. The proposed model outperforms the TRPN model and provides a practical, effective, and adaptive method for risk evaluation. In particular, the defined GRPN function offers a new method to prioritize failure modes in failure mode and effect analysis (FMEA. The different risk preferences considered in the healthcare example show that the modified FMEA model can take into account the various risk factors and prioritize failure modes more accurately. In addition, the model also can apply to a generic e-healthcare service environment with a hierarchical architecture.

  2. Value at risk (VaR in uncertainty: Analysis with parametric method and black & scholes simulations

    Directory of Open Access Journals (Sweden)

    Humberto Banda Ortiz

    2014-07-01

    Full Text Available VaR is the most accepted risk measure worldwide and the leading reference in any risk management assessment. However, its methodology has important limitations which makes it unreliable in contexts of crisis or high uncertainty. For this reason, the aim of this work is to test the VaR accuracy when is employed in contexts of volatility, for which we compare the VaR outcomes in scenarios of both stability and uncertainty, using the parametric method and a historical simulation based on data generated with the Black & Scholes model. VaR main objective is the prediction of the highest expected loss for any given portfolio, but even when it is considered a useful tool for risk management under conditions of markets stability, we found that it is substantially inaccurate in contexts of crisis or high uncertainty. In addition, we found that the Black & Scholes simulations lead to underestimate the expected losses, in comparison with the parametric method and we also found that those disparities increase substantially in times of crisis. In the first section of this work we present a brief context of risk management in finance. In section II we present the existent literature relative to the VaR concept, its methods and applications. In section III we describe the methodology and assumptions used in this work. Section IV is dedicated to expose the findings. And finally, in Section V we present our conclusions.

  3. The role of risk analysis in control of complex plants' safety operation

    International Nuclear Information System (INIS)

    Dumitrescu, Maria; Preda, Irina Aida; Lazar, Roxana Elena; Carcadea, Elena

    1999-01-01

    The problem of risk estimation, assessment and control is necessary to be discussed at every decision level of an activity. In this way the performances of a system, action or technology are qualitatively assessed by indicating the possible consequences on environmental, people or property. The paper presents methodologies of risk assessment successfully applied on isotopic separation plants. The quantitative methodologies presented use fault tree and event tree to determine the accident states frequency and physical models to analyse the dispersion in atmosphere of dangerous substances. The qualitative methodologies use fuzzy models for the multi-criteria decision making, models based on risk matrix built on the basis of a combination between severity and probability of maximum admissible consequence. These methodologies present the following steps for applying: familiarising with the activity in study, establishing the adequate method of risk assessment, realising of the model of risk assessment for the activity or objective in study, developing of application of the proposed model. Applying this methodology to isotopic separation plants has led to: analysis of operation events and establishing of principal types of events potentially dangerous, analysis of human error in these plants operation and operating experience assessment, technical specifications optimisation by probabilistic safety assessment, reliability analysis and development of reliability and exploitation events database, post accident events analysis (releases, fires, explosions) and mathematical modelling of dispersion in atmosphere of dangerous substances. The risk concept being complex and with multiple implications, it is not the case of a rigid approaching neither of existence of some methods universally valid. Because of these reasons choosing of the most appropriate method for the risk assessment of an activity, leads to solution in due time, of some problems with economic, social

  4. The role of risk analysis in control of complex plant safe operation

    International Nuclear Information System (INIS)

    Dumitrescu, Maria; Preda, Irina Aida; Lazar, Roxana Elena; Carcadea, Elena

    1999-01-01

    The problem of risk estimation assessment and control is necessary to be discussed in every decision making level of an activity. Performances of a system, action or technology, by indicating the possible consequences on environment, people or property should be qualitatively assessed. The paper presents methodologies of risk assessment successful applied on isotopic separation plants. The quantitative methodologies presented, use fault tree and event tree to determine the accident states frequency, physical models to analyse the dispersion in atmosphere of dangerous substances. The qualitative methodologies use the fuzzy models for the multicriterial decision making, models based on risk matrix build on the base of combination between the severity and the probability of maximum admissible consequence. These methodologies present the following steps for applying: familiarising with the activity in study, establishing the adequate method of risk assessment, building the model of risk assessment for the activity or objective in study, developing the applications of the proposed model. Applying this methodology to isotopic separation plants have led to: analysis of operation events and establishing of principal types of events potentially dangerous, analysis of human error in these plant operations and operating experience assessment, technical specifications for optimisation by probabilistic safety assessment, reliability analysis and development of reliability and exploitation of events database, post accident events analysis (releases, fires, explosions) and mathematical modelling of dispersion in atmosphere of dangerous substances. The risk concept being complex and with multiple implications, is not the case of a rigid approaching neither of existence of some methods universally valid. Because of these reasons, choosing of the most appropriate method for the risk assessment of an activity, leads to a solution in useful time, of some problems with economic, social

  5. Risk analysis of warehouse operation in a power plant through a Modified FMEA

    Directory of Open Access Journals (Sweden)

    Indrawati Sri

    2018-01-01

    Full Text Available Currently, electricity becomes basic needs for human’s life sustainability. Most of activities require electricity. Some power plant are demanded to be able to fulfil above necessity by distributing electricity as it required within time. Therefore, to accommodate good performance, it needs assessment on risk analysis, specifically at the warehousing division. A risk analysis is needed for assuring a good performance warehouse. A Modified FMEA method is used to analyse the risk. This method id done by identifying sources and root causes of a problem based on the value of risk priority number (RPN. The research is conducted in an Indonesian power plant, located in West Java. There are 10 types of failure modes. The result shows that the failure mode priority is inventory discrepancies. There are no difference ranking on the most impacted failure to be prioritized using FMEA and modified FMEA method.

  6. Risk analysis by FMEA as an element of analytical validation.

    Science.gov (United States)

    van Leeuwen, J F; Nauta, M J; de Kaste, D; Odekerken-Rombouts, Y M C F; Oldenhof, M T; Vredenbregt, M J; Barends, D M

    2009-12-05

    We subjected a Near-Infrared (NIR) analytical procedure used for screening drugs on authenticity to a Failure Mode and Effects Analysis (FMEA), including technical risks as well as risks related to human failure. An FMEA team broke down the NIR analytical method into process steps and identified possible failure modes for each step. Each failure mode was ranked on estimated frequency of occurrence (O), probability that the failure would remain undetected later in the process (D) and severity (S), each on a scale of 1-10. Human errors turned out to be the most common cause of failure modes. Failure risks were calculated by Risk Priority Numbers (RPNs)=O x D x S. Failure modes with the highest RPN scores were subjected to corrective actions and the FMEA was repeated, showing reductions in RPN scores and resulting in improvement indices up to 5.0. We recommend risk analysis as an addition to the usual analytical validation, as the FMEA enabled us to detect previously unidentified risks.

  7. Risk Analysis in Road Tunnels – Most Important Risk Indicators

    DEFF Research Database (Denmark)

    Berchtold, Florian; Knaust, Christian; Thöns, Sebastian

    2016-01-01

    Methodologies on fire risk analysis in road tunnels consider numerous factors affecting risks (risk indicators) and express the results by risk measures. But only few comprehensive studies on effects of risk indicators on risk measures are available. For this reason, this study quantifies...... the effects and highlights the most important risk indicators with the aim to support further developments in risk analysis. Therefore, a system model of a road tunnel was developed to determine the risk measures. The system model can be divided into three parts: the fire part connected to the fire model Fire...... Dynamics Simulator (FDS); the evacuation part connected to the evacuation model FDS+Evac; and the frequency part connected to a model to calculate the frequency of fires. This study shows that the parts of the system model (and their most important risk indicators) affect the risk measures in the following...

  8. Risk analysis in radiosurgery treatments using risk matrices

    International Nuclear Information System (INIS)

    Delgado, J. M.; Sanchez Cayela, C.; Ramirez, M. L.; Perez, A.

    2011-01-01

    The aim of this study is the risk analysis process stereotactic single-dose radiotherapy and evaluation of those initiating events that lead to increased risk and a possible solution in the design of barriers.

  9. Applied decision analysis and risk evaluation

    International Nuclear Information System (INIS)

    Ferse, W.; Kruber, S.

    1995-01-01

    During 1994 the workgroup 'Applied Decision Analysis and Risk Evaluation; continued the work on the knowledge based decision support system XUMA-GEFA for the evaluation of the hazard potential of contaminated sites. Additionally a new research direction was started which aims at the support of a later stage of the treatment of contaminated sites: The clean-up decision. For the support of decisions arising at this stage, the methods of decision analysis will be used. Computational aids for evaluation and decision support were implemented and a case study at a waste disposal site in Saxony which turns out to be a danger for the surrounding groundwater ressource was initiated. (orig.)

  10. A Method for Dynamic Risk Assessment and Management of Rockbursts in Drill and Blast Tunnels

    Science.gov (United States)

    Liu, Guo-Feng; Feng, Xia-Ting; Feng, Guang-Liang; Chen, Bing-Rui; Chen, Dong-Fang; Duan, Shu-Qian

    2016-08-01

    Focusing on the problems caused by rockburst hazards in deep tunnels, such as casualties, damage to construction equipment and facilities, construction schedule delays, and project cost increase, this research attempts to present a methodology for dynamic risk assessment and management of rockbursts in D&B tunnels. The basic idea of dynamic risk assessment and management of rockbursts is determined, and methods associated with each step in the rockburst risk assessment and management process are given, respectively. Among them, the main parts include a microseismic method for early warning the occurrence probability of rockburst risk, an estimation method that aims to assess potential consequences of rockburst risk, an evaluation method that utilizes a new quantitative index considering both occurrence probability and consequences for determining the level of rockburst risk, and the dynamic updating. Specifically, this research briefly describes the referenced microseismic method of warning rockburst, but focuses on the analysis of consequences and associated risk assessment and management of rockburst. Using the proposed method of risk assessment and management of rockburst, the occurrence probability, potential consequences, and the level of rockburst risk can be obtained in real-time during tunnel excavation, which contributes to the dynamic optimisation of risk mitigation measures and their application. The applicability of the proposed method has been verified by those cases from the Jinping II deep headrace and water drainage tunnels at depths of 1900-2525 m (with a length of 11.6 km in total for D&B tunnels).

  11. Methods to estimate the genetic risk

    International Nuclear Information System (INIS)

    Ehling, U.H.

    1989-01-01

    The estimation of the radiation-induced genetic risk to human populations is based on the extrapolation of results from animal experiments. Radiation-induced mutations are stochastic events. The probability of the event depends on the dose; the degree of the damage dose not. There are two main approaches in making genetic risk estimates. One of these, termed the direct method, expresses risk in terms of expected frequencies of genetic changes induced per unit dose. The other, referred to as the doubling dose method or the indirect method, expresses risk in relation to the observed incidence of genetic disorders now present in man. The advantage of the indirect method is that not only can Mendelian mutations be quantified, but also other types of genetic disorders. The disadvantages of the method are the uncertainties in determining the current incidence of genetic disorders in human and, in addition, the estimasion of the genetic component of congenital anomalies, anomalies expressed later and constitutional and degenerative diseases. Using the direct method we estimated that 20-50 dominant radiation-induced mutations would be expected in 19 000 offspring born to parents exposed in Hiroshima and Nagasaki, but only a small proportion of these mutants would have been detected with the techniques used for the population study. These methods were used to predict the genetic damage from the fallout of the reactor accident at Chernobyl in the vicinity of Southern Germany. The lack of knowledge for the interaction of chemicals with ionizing radiation and the discrepancy between the high safety standards for radiation protection and the low level of knowledge for the toxicological evaluation of chemical mutagens will be emphasized. (author)

  12. Case studies: Risk-based analysis of technical specifications

    International Nuclear Information System (INIS)

    Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

    1987-01-01

    The SOCRATES computer program uses the results of a Probabilistic Risk Assessment (PRA) or a system level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at a plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns with no adverse impacts on risk. Three summaries of case study applications are included to demonstrate the types of results that can be achieved through risk-based evaluation of technical specifications. (orig.)

  13. The Functional Resonance Analysis Method for a systemic risk based environmental auditing in a sinter plant: A semi-quantitative approach

    International Nuclear Information System (INIS)

    Patriarca, Riccardo; Di Gravio, Giulio; Costantino, Francesco; Tronci, Massimo

    2017-01-01

    Environmental auditing is a main issue for any production plant and assessing environmental performance is crucial to identify risks factors. The complexity of current plants arises from interactions among technological, human and organizational system components, which are often transient and not easily detectable. The auditing thus requires a systemic perspective, rather than focusing on individual behaviors, as emerged in recent research in the safety domain for socio-technical systems. We explore the significance of modeling the interactions of system components in everyday work, by the application of a recent systemic method, i.e. the Functional Resonance Analysis Method (FRAM), in order to define dynamically the system structure. We present also an innovative evolution of traditional FRAM following a semi-quantitative approach based on Monte Carlo simulation. This paper represents the first contribution related to the application of FRAM in the environmental context, moreover considering a consistent evolution based on Monte Carlo simulation. The case study of an environmental risk auditing in a sinter plant validates the research, showing the benefits in terms of identifying potential critical activities, related mitigating actions and comprehensive environmental monitoring indicators. - Highlights: • We discuss the relevance of a systemic risk based environmental audit. • We present FRAM to represent functional interactions of the system. • We develop a semi-quantitative FRAM framework to assess environmental risks. • We apply the semi-quantitative FRAM framework to build a model for a sinter plant.

  14. The Functional Resonance Analysis Method for a systemic risk based environmental auditing in a sinter plant: A semi-quantitative approach

    Energy Technology Data Exchange (ETDEWEB)

    Patriarca, Riccardo, E-mail: riccardo.patriarca@uniroma1.it; Di Gravio, Giulio; Costantino, Francesco; Tronci, Massimo

    2017-03-15

    Environmental auditing is a main issue for any production plant and assessing environmental performance is crucial to identify risks factors. The complexity of current plants arises from interactions among technological, human and organizational system components, which are often transient and not easily detectable. The auditing thus requires a systemic perspective, rather than focusing on individual behaviors, as emerged in recent research in the safety domain for socio-technical systems. We explore the significance of modeling the interactions of system components in everyday work, by the application of a recent systemic method, i.e. the Functional Resonance Analysis Method (FRAM), in order to define dynamically the system structure. We present also an innovative evolution of traditional FRAM following a semi-quantitative approach based on Monte Carlo simulation. This paper represents the first contribution related to the application of FRAM in the environmental context, moreover considering a consistent evolution based on Monte Carlo simulation. The case study of an environmental risk auditing in a sinter plant validates the research, showing the benefits in terms of identifying potential critical activities, related mitigating actions and comprehensive environmental monitoring indicators. - Highlights: • We discuss the relevance of a systemic risk based environmental audit. • We present FRAM to represent functional interactions of the system. • We develop a semi-quantitative FRAM framework to assess environmental risks. • We apply the semi-quantitative FRAM framework to build a model for a sinter plant.

  15. Risk analysis of Odelouca cofferdam

    OpenAIRE

    Pimenta, L.; Caldeira, L.; Maranha das Neves, E.

    2009-01-01

    In this paper we present the risk analysis of Odelouca Cofferdam, using an event tree analysis. The initializing events, failure modes and analysed limit states are discussed based on an influence diagram. The constructed event trees and their interpretation are presented. The obtained risk values are represented in an FN plot superimposed to the acceptability and tolerability risk limits proposed for Portuguese dams. Initially, particular emphasis is placed on the main characteristic...

  16. Modified risk evaluation method

    International Nuclear Information System (INIS)

    Udell, C.J.; Tilden, J.A.; Toyooka, R.T.

    1993-08-01

    The purpose of this paper is to provide a structured and cost-oriented process to determine risks associated with nuclear material and other security interests. Financial loss is a continuing concern for US Department of Energy contractors. In this paper risk is equated with uncertainty of cost impacts to material assets or human resources. The concept provides a method for assessing the effectiveness of an integrated protection system, which includes operations, safety, emergency preparedness, and safeguards and security. The concept is suitable for application to sabotage evaluations. The protection of assets is based on risk associated with cost impacts to assets and the potential for undesirable events. This will allow managers to establish protection priorities in terms of the cost and the potential for the event, given the current level of protection

  17. Risk evaluation method for faults by engineering approach. (2) Application concept of margin analysis utilizing accident sequences

    International Nuclear Information System (INIS)

    Kamiya, Masanobu; Kanaida, Syuuji; Kamiya, Kouichi; Sato, Kunihiko; Kuroiwa, Katsuya

    2016-01-01

    The influence of the fault displacement on the facility should to be evaluated not only by the activity of the fault but also by obtaining risk information by considering scenarios including such as the frequency and the degree of the hazard, which should be an appropriate approach for nuclear safety. An applicable concept of margin analysis utilizing accident sequences for evaluating the influence of the fault displacement is proposed. By use of this analysis, we can evaluate of the safety functions and margin for core damage, verify the efficiency of equipment of portable type and make a decision to take additional measures to reduce the risk by using obtained risk information. (author)

  18. Country risk analysis

    International Nuclear Information System (INIS)

    David, A.

    1992-01-01

    This paper reports that the oil industry has been an internationally based industry that has been heavily dependent on outside financing sources. Historically, financing came from investment houses that, in most cases, participated in the projects as equity investors. However, investment companies can no longer satisfy the capital requirements of the current high level of exploration and development activities. The current trend is to involve commercial banks on a purely lending basis. Commercial banks, by their nature, are risk averse. In the case of oil and gas exploration and production they are asked to take not only technical risk and price risk but geopolitical risk as well. Methods have been developed by commercial banks to reduce technical and price risks to point which enables them to be comfortable with a loan. However, geopolitical risks are more difficult to assess. The risk associated with many countries are the nationalization of the investment, new tax restrictions, restriction of currency movements, and/or revisions to the production sharing agreements

  19. Analysis of labour risks in the Spanish industrial aerospace sector

    Directory of Open Access Journals (Sweden)

    JUAN LAGUARDIA

    Full Text Available ABSTRACT Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

  20. Analysis of labour risks in the Spanish industrial aerospace sector.

    Science.gov (United States)

    Laguardia, Juan; Rubio, Emilio; Garcia, Ana; Garcia-Foncillas, Rafael

    2016-01-01

    Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA) was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS) using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS) were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation) of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G) or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

  1. Risk D and D Rapid Prototype: Scenario Documentation and Analysis Tool

    International Nuclear Information System (INIS)

    Unwin, Stephen D.; Seiple, Timothy E.

    2009-01-01

    Report describes process and methodology associated with a rapid prototype tool for integrating project risk analysis and health and safety risk analysis for decontamination and decommissioning projects. The objective of the Decontamination and Decommissioning (D and D) Risk Management Evaluation and Work Sequencing Standardization Project under DOE EM-23 is to recommend or develop practical risk-management tools for decommissioning of nuclear facilities. PNNL has responsibility under this project for recommending or developing computer-based tools that facilitate the evaluation of risks in order to optimize the sequencing of D and D work. PNNL's approach is to adapt, augment, and integrate existing resources rather than to develop a new suite of tools. Methods for the evaluation of H and S risks associated with work in potentially hazardous environments are well-established. Several approaches exist which, collectively, are referred to as process hazard analysis (PHA). A PHA generally involves the systematic identification of accidents, exposures, and other adverse events associated with a given process or work flow. This identification process is usually achieved in a brainstorming environment or by other means of eliciting informed opinion. The likelihoods of adverse events (scenarios) and their associated consequence severities are estimated against pre-defined scales, based on which risk indices are then calculated. A similar process is encoded in various project risk software products that facilitate the quantification of schedule and cost risks associated with adverse scenarios. However, risk models do not generally capture both project risk and H and S risk. The intent of the project reported here is to produce a tool that facilitates the elicitation, characterization, and documentation of both project risk and H and S risk based on defined sequences of D and D activities. By considering alternative D and D sequences, comparison of the predicted risks can

  2. Risks Analysis of Logistics Financial Business Based on Evidential Bayesian Network

    Directory of Open Access Journals (Sweden)

    Ying Yan

    2013-01-01

    Full Text Available Risks in logistics financial business are identified and classified. Making the failure of the business as the root node, a Bayesian network is constructed to measure the risk levels in the business. Three importance indexes are calculated to find the most important risks in the business. And more, considering the epistemic uncertainties in the risks, evidence theory associate with Bayesian network is used as an evidential network in the risk analysis of logistics finance. To find how much uncertainty in root node is produced by each risk, a new index, epistemic importance, is defined. Numerical examples show that the proposed methods could provide a lot of useful information. With the information, effective approaches could be found to control and avoid these sensitive risks, thus keep logistics financial business working more reliable. The proposed method also gives a quantitative measure of risk levels in logistics financial business, which provides guidance for the selection of financing solutions.

  3. Dysphonic Voice Pattern Analysis of Patients in Parkinson’s Disease Using Minimum Interclass Probability Risk Feature Selection and Bagging Ensemble Learning Methods

    Directory of Open Access Journals (Sweden)

    Yunfeng Wu

    2017-01-01

    Full Text Available Analysis of quantified voice patterns is useful in the detection and assessment of dysphonia and related phonation disorders. In this paper, we first study the linear correlations between 22 voice parameters of fundamental frequency variability, amplitude variations, and nonlinear measures. The highly correlated vocal parameters are combined by using the linear discriminant analysis method. Based on the probability density functions estimated by the Parzen-window technique, we propose an interclass probability risk (ICPR method to select the vocal parameters with small ICPR values as dominant features and compare with the modified Kullback-Leibler divergence (MKLD feature selection approach. The experimental results show that the generalized logistic regression analysis (GLRA, support vector machine (SVM, and Bagging ensemble algorithm input with the ICPR features can provide better classification results than the same classifiers with the MKLD selected features. The SVM is much better at distinguishing normal vocal patterns with a specificity of 0.8542. Among the three classification methods, the Bagging ensemble algorithm with ICPR features can identify 90.77% vocal patterns, with the highest sensitivity of 0.9796 and largest area value of 0.9558 under the receiver operating characteristic curve. The classification results demonstrate the effectiveness of our feature selection and pattern analysis methods for dysphonic voice detection and measurement.

  4. Enhancing local action planning through quantitative flood risk analysis: a case study in Spain

    Science.gov (United States)

    Castillo-Rodríguez, Jesica Tamara; Escuder-Bueno, Ignacio; Perales-Momparler, Sara; Ramón Porta-Sancho, Juan

    2016-07-01

    This article presents a method to incorporate and promote quantitative risk analysis to support local action planning against flooding. The proposed approach aims to provide a framework for local flood risk analysis, combining hazard mapping with vulnerability data to quantify risk in terms of expected annual affected population, potential injuries, number of fatalities, and economic damages. Flood risk is estimated combining GIS data of loads, system response, and consequences and using event tree modelling for risk calculation. The study area is the city of Oliva, located on the eastern coast of Spain. Results from risk modelling have been used to inform local action planning and to assess the benefits of structural and non-structural risk reduction measures. Results show the potential impact on risk reduction of flood defences and improved warning communication schemes through local action planning: societal flood risk (in terms of annual expected affected population) would be reduced up to 51 % by combining both structural and non-structural measures. In addition, the effect of seasonal population variability is analysed (annual expected affected population ranges from 82 to 107 %, compared with the current situation, depending on occupancy rates in hotels and campsites). Results highlight the need for robust and standardized methods for urban flood risk analysis replicability at regional and national scale.

  5. Toward a risk assessment of the spent fuel and high-level nuclear waste disposal system. Risk assessment requirements, literature review, methods evaluation: an interim report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, L.D.; Hill, D.; Rowe, M.D.; Stern, E.

    1986-04-01

    This report provides background information for a risk assessment of the disposal system for spent nuclear fuel and high-level radioactive waste (HLW). It contains a literature review, a survey of the statutory requirements for risk assessment, and a preliminary evaluation of methods. The literature review outlines the state of knowledge of risk assessment and accident consequence analysis in the nuclear fuel cycle and its applicability to spent fuel and HLW disposal. The survey of statutory requirements determines the extent to which risk assessment may be needed in development of the waste-disposal system. The evaluation of methods reviews and evaluates merits and applicabilities of alternative methods for assessing risks and relates them to the problems of spent fuel and HLW disposal. 99 refs.

  6. Toward a risk assessment of the spent fuel and high-level nuclear waste disposal system. Risk assessment requirements, literature review, methods evaluation: an interim report

    International Nuclear Information System (INIS)

    Hamilton, L.D.; Hill, D.; Rowe, M.D.; Stern, E.

    1986-04-01

    This report provides background information for a risk assessment of the disposal system for spent nuclear fuel and high-level radioactive waste (HLW). It contains a literature review, a survey of the statutory requirements for risk assessment, and a preliminary evaluation of methods. The literature review outlines the state of knowledge of risk assessment and accident consequence analysis in the nuclear fuel cycle and its applicability to spent fuel and HLW disposal. The survey of statutory requirements determines the extent to which risk assessment may be needed in development of the waste-disposal system. The evaluation of methods reviews and evaluates merits and applicabilities of alternative methods for assessing risks and relates them to the problems of spent fuel and HLW disposal. 99 refs

  7. Development of innovative methods for risk assessment in high-rise construction based on clustering of risk factors

    Science.gov (United States)

    Okolelova, Ella; Shibaeva, Marina; Shalnev, Oleg

    2018-03-01

    The article analyses risks in high-rise construction in terms of investment value with account of the maximum probable loss in case of risk event. The authors scrutinized the risks of high-rise construction in regions with various geographic, climatic and socio-economic conditions that may influence the project environment. Risk classification is presented in general terms, that includes aggregated characteristics of risks being common for many regions. Cluster analysis tools, that allow considering generalized groups of risk depending on their qualitative and quantitative features, were used in order to model the influence of the risk factors on the implementation of investment project. For convenience of further calculations, each type of risk is assigned a separate code with the number of the cluster and the subtype of risk. This approach and the coding of risk factors makes it possible to build a risk matrix, which greatly facilitates the task of determining the degree of impact of risks. The authors clarified and expanded the concept of the price risk, which is defined as the expected value of the event, 105 which extends the capabilities of the model, allows estimating an interval of the probability of occurrence and also using other probabilistic methods of calculation.

  8. Structural reliability analysis applied to pipeline risk analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gardiner, M. [GL Industrial Services, Loughborough (United Kingdom); Mendes, Renato F.; Donato, Guilherme V.P. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Quantitative Risk Assessment (QRA) of pipelines requires two main components to be provided. These are models of the consequences that follow from some loss of containment incident, and models for the likelihood of such incidents occurring. This paper describes how PETROBRAS have used Structural Reliability Analysis for the second of these, to provide pipeline- and location-specific predictions of failure frequency for a number of pipeline assets. This paper presents an approach to estimating failure rates for liquid and gas pipelines, using Structural Reliability Analysis (SRA) to analyze the credible basic mechanisms of failure such as corrosion and mechanical damage. SRA is a probabilistic limit state method: for a given failure mechanism it quantifies the uncertainty in parameters to mathematical models of the load-resistance state of a structure and then evaluates the probability of load exceeding resistance. SRA can be used to benefit the pipeline risk management process by optimizing in-line inspection schedules, and as part of the design process for new construction in pipeline rights of way that already contain multiple lines. A case study is presented to show how the SRA approach has recently been used on PETROBRAS pipelines and the benefits obtained from it. (author)

  9. Nuclear risk analysis of the Ulysses mission

    International Nuclear Information System (INIS)

    Bartram, B.W.; Vaughan, F.R.; Englehart, D.R.W.

    1991-01-01

    The use of a radioisotope thermoelectric generator fueled with plutonium-238 dioxide on the Space Shuttle-launched Ulysses mission implies some level of risk due to potential accidents. This paper describes the method used to quantify risks in the Ulysses mission Final Safety Analysis Report prepared for the U.S. Department of Energy. The starting point for the analysis described herein is following input of source term probability distributions from the General Electric Company. A Monte Carlo technique is used to develop probability distributions of radiological consequences for a range of accident scenarios thoughout the mission. Factors affecting radiological consequences are identified, the probability distribution of the effect of each factor determined, and the functional relationship among all the factors established. The probability distributions of all the factor effects are then combined using a Monte Carlo technique. The results of the analysis are presented in terms of complementary cumulative distribution functions (CCDF) by mission sub-phase, phase, and the overall mission. The CCDFs show the total probability that consequences (calculated health effects) would be equal to or greater than a given value

  10. RISK LEVEL ANALYSIS ON THE PREVENTIVE EROSION CAPACITY OF BRIDGES

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Deficiency of the Preventive Erosion Capacity (PEC) of a bridge pier is the main factor leading to bridge failures. In this paper, the PEC of bridge piers was analyzed using the stochastic analysis method. The definitions of the reliability and risk level of a bridge pier subjected to water erosion were proposed and a computational model for erosion depth and risk level in was suggested.

  11. Predicting high risk births with contraceptive prevalence and contraceptive method-mix in an ecologic analysis.

    Science.gov (United States)

    Perin, Jamie; Amouzou, Agbessi; Walker, Neff

    2017-11-07

    Increased contraceptive use has been associated with a decrease in high parity births, births that occur close together in time, and births to very young or to older women. These types of births are also associated with high risk of under-five mortality. Previous studies have looked at the change in the level of contraception use and the average change in these types of high-risk births. We aim to predict the distribution of births in a specific country when there is a change in the level and method of modern contraception. We used data from full birth histories and modern contraceptive use from 207 nationally representative Demographic and Health Surveys covering 71 countries to describe the distribution of births in each survey based on birth order, preceding birth space, and mother's age at birth. We estimated the ecologic associations between the prevalence and method-mix of modern contraceptives and the proportion of births in each category. Hierarchical modelling was applied to these aggregated cross sectional proportions, so that random effects were estimated for countries with multiple surveys. We use these results to predict the change in type of births associated with scaling up modern contraception in three different scenarios. We observed marked differences between regions, in the absolute rates of contraception, the types of contraceptives in use, and in the distribution of type of birth. Contraceptive method-mix was a significant determinant of proportion of high-risk births, especially for birth spacing, but also for mother's age and parity. Increased use of modern contraceptives is especially predictive of reduced parity and more births with longer preceding space. However, increased contraception alone is not associated with fewer births to women younger than 18 years or a decrease in short-spaced births. Both the level and the type of contraception are important factors in determining the effects of family planning on changes in distribution of

  12. Information Security Risk Analysis

    CERN Document Server

    Peltier, Thomas R

    2010-01-01

    Offers readers with the knowledge and the skill-set needed to achieve a highly effective risk analysis assessment. This title demonstrates how to identify threats and then determine if those threats pose a real risk. It is suitable for industry and academia professionals.

  13. Application to risk analysis of Monte Carlo method

    International Nuclear Information System (INIS)

    Mihara, Takashi

    2001-01-01

    Phased mission analysis code, PHAMMON by means of monte carlo method is developed for reliability assessment of decay heat removal system in LMFBR. Success criteria and grace periods of the decay heat removal system which has long mission times (∼1 week or ∼1 month) change as a function of time. It is necessary to divide mission time into some phases. In probability safety assessment (PSA) of real systems, it usually happens that the mean time to component failure (MTTF) is considerably long (1000-10 6 hours) and the mean time to component repair (MTTR) is short (∼10 hours). The failure probability of the systems, therefore, is extremely small (10 -6 -10 -9 ). Suitable variance reduction techniques are needed. The PHAMMON code involved two kinds of variance reduction techniques: (1) forced time transitions, and (2) failure biasing. For further reducing the variance of the result from the PHAMMON code execution, a biasing method of the transitions towards the closest cut set incorporating a new distance concept is introduced to the PHAMMON code. Failure probability and it's fractional standard deviation for the decay heat removal system are calculated by the PHAMMON code under the conditions of various success criteria over 168hrs after reactor shutdown. The biasing of the transition towards the closet cut set is an effective means of reducing the variance. (M. Suetake)

  14. Creating a spatially-explicit index: a method for assessing the global wildfire-water risk

    Science.gov (United States)

    Robinne, François-Nicolas; Parisien, Marc-André; Flannigan, Mike; Miller, Carol; Bladon, Kevin D.

    2017-04-01

    The wildfire-water risk (WWR) has been defined as the potential for wildfires to adversely affect water resources that are important for downstream ecosystems and human water needs for adequate water quantity and quality, therefore compromising the security of their water supply. While tools and methods are numerous for watershed-scale risk analysis, the development of a toolbox for the large-scale evaluation of the wildfire risk to water security has only started recently. In order to provide managers and policy-makers with an adequate tool, we implemented a method for the spatial analysis of the global WWR based on the Driving forces-Pressures-States-Impacts-Responses (DPSIR) framework. This framework relies on the cause-and-effect relationships existing between the five categories of the DPSIR chain. As this approach heavily relies on data, we gathered an extensive set of spatial indicators relevant to fire-induced hydrological hazards and water consumption patterns by human and natural communities. When appropriate, we applied a hydrological routing function to our indicators in order to simulate downstream accumulation of potentially harmful material. Each indicator was then assigned a DPSIR category. We collapsed the information in each category using a principal component analysis in order to extract the most relevant pixel-based information provided by each spatial indicator. Finally, we compiled our five categories using an additive indexation process to produce a spatially-explicit index of the WWR. A thorough sensitivity analysis has been performed in order to understand the relationship between the final risk values and the spatial pattern of each category used during the indexation. For comparison purposes, we aggregated index scores by global hydrological regions, or hydrobelts, to get a sense of regional DPSIR specificities. This rather simple method does not necessitate the use of complex physical models and provides a scalable and efficient tool

  15. Bias in risk-benefit analysis

    International Nuclear Information System (INIS)

    Mazur, A.

    1985-01-01

    Risk-benefit analysis has become popular in the past decade as a means of improving decision making, especially in the area of technology policy. Here risk-benefit analysis is compared to other (equally defensible) approaches to decision making, showing how it favors some political interests more than others, and suggesting why it has recently come to the fore as a tool of political analysis. A considerable portion of the discussion concerns nuclear power. 6 references

  16. Revealing the underlying drivers of disaster risk: a global analysis

    Science.gov (United States)

    Peduzzi, Pascal

    2017-04-01

    Disasters events are perfect examples of compound events. Disaster risk lies at the intersection of several independent components such as hazard, exposure and vulnerability. Understanding the weight of each component requires extensive standardisation. Here, I show how footprints of past disastrous events were generated using GIS modelling techniques and used for extracting population and economic exposures based on distribution models. Using past event losses, it was possible to identify and quantify a wide range of socio-politico-economic drivers associated with human vulnerability. The analysis was applied to about nine thousand individual past disastrous events covering earthquakes, floods and tropical cyclones. Using a multiple regression analysis on these individual events it was possible to quantify each risk component and assess how vulnerability is influenced by various hazard intensities. The results show that hazard intensity, exposure, poverty, governance as well as other underlying factors (e.g. remoteness) can explain the magnitude of past disasters. Analysis was also performed to highlight the role of future trends in population and climate change and how this may impacts exposure to tropical cyclones in the future. GIS models combined with statistical multiple regression analysis provided a powerful methodology to identify, quantify and model disaster risk taking into account its various components. The same methodology can be applied to various types of risk at local to global scale. This method was applied and developed for the Global Risk Analysis of the Global Assessment Report on Disaster Risk Reduction (GAR). It was first applied on mortality risk in GAR 2009 and GAR 2011. New models ranging from global assets exposure and global flood hazard models were also recently developed to improve the resolution of the risk analysis and applied through CAPRA software to provide probabilistic economic risk assessments such as Average Annual Losses (AAL

  17. LANDSAFE: LANDING SITE RISK ANALYSIS SOFTWARE FRAMEWORK

    Directory of Open Access Journals (Sweden)

    R. Schmidt

    2012-08-01

    Full Text Available The European Space Agency (ESA is planning a Lunar Lander mission in the 2018 timeframe that will demonstrate precise soft landing at the polar regions of the Moon. To ensure a safe and successful landing a careful risk analysis has to be carried out. This is comprised of identifying favorable target areas and evaluating the surface conditions in these areas. Features like craters, boulders, steep slopes, rough surfaces and shadow areas have to be identified in order to assess the risk associated to a landing site in terms of a successful touchdown and subsequent surface operation of the lander. In addition, global illumination conditions at the landing site have to be simulated and analyzed. The Landing Site Risk Analysis software framework (LandSAfe is a system for the analysis, selection and certification of safe landing sites on the lunar surface. LandSAfe generates several data products including high resolution digital terrain models (DTMs, hazard maps, illumination maps, temperature maps and surface reflectance maps which assist the user in evaluating potential landing site candidates. This paper presents the LandSAfe system and describes the methods and products of the different modules. For one candidate landing site on the rim of Shackleton crater at the south pole of the Moon a high resolution DTM is showcased.

  18. A probabilistic method for computing quantitative risk indexes from medical injuries compensation claims.

    Science.gov (United States)

    Dalle Carbonare, S; Folli, F; Patrini, E; Giudici, P; Bellazzi, R

    2013-01-01

    The increasing demand of health care services and the complexity of health care delivery require Health Care Organizations (HCOs) to approach clinical risk management through proper methods and tools. An important aspect of risk management is to exploit the analysis of medical injuries compensation claims in order to reduce adverse events and, at the same time, to optimize the costs of health insurance policies. This work provides a probabilistic method to estimate the risk level of a HCO by computing quantitative risk indexes from medical injury compensation claims. Our method is based on the estimate of a loss probability distribution from compensation claims data through parametric and non-parametric modeling and Monte Carlo simulations. The loss distribution can be estimated both on the whole dataset and, thanks to the application of a Bayesian hierarchical model, on stratified data. The approach allows to quantitatively assessing the risk structure of the HCO by analyzing the loss distribution and deriving its expected value and percentiles. We applied the proposed method to 206 cases of injuries with compensation requests collected from 1999 to the first semester of 2007 by the HCO of Lodi, in the Northern part of Italy. We computed the risk indexes taking into account the different clinical departments and the different hospitals involved. The approach proved to be useful to understand the HCO risk structure in terms of frequency, severity, expected and unexpected loss related to adverse events.

  19. Movement recognition technology as a method of assessing spontaneous general movements in high risk infants

    Directory of Open Access Journals (Sweden)

    Claire eMarcroft

    2015-01-01

    Full Text Available Preterm birth is associated with increased risks of neurological and motor impairments such as cerebral palsy. The risks are highest in those born at the lowest gestations. Early identification of those most at risk is challenging meaning that a critical window of opportunity to improve outcomes through therapy-based interventions may be missed. Clinically, the assessment of spontaneous general movements is an important tool which can be used for the prediction of movement impairments in high risk infants.Movement recognition aims to capture and analyze relevant limb movements through computerized approaches focusing on continuous, objective, and quantitative assessment. Different methods of recording and analyzing infant movements have recently been explored in high risk infants. These range from camera-based solutions to body-worn miniaturized movement sensors used to record continuous time-series data that represent the dynamics of limb movements. Various machine learning methods have been developed and applied to the analysis of the recorded movement data. This analysis has focused on the detection and classification of atypical spontaneous general movements. This paper aims to identify recent translational studies using movement recognition technology as a method of assessing movement in high risk infants. The application of this technology within pediatric practice represents a growing area of inter-disciplinary collaboration which may lead to a greater understanding of the development of the nervous system in infants at high risk of motor impairment.

  20. Risk analysis related to dangerous materials transport and storage in urban areas

    International Nuclear Information System (INIS)

    Lombard, J.; Hubert, P.; Pages, P.

    1989-12-01

    Risk management in an urban areas not always an easy task and the selection of appropriate prevention measure is often difficult. Consequences of an accident can be multiple (mortality, destruction, pollution, interruption of supplies, economic losses, traffic difficulties), and preventive measures are difficult to compare. The objective of this report is to present different methods applicable for decision making emphasising the criteria for their intercomparison and their limitations. In any case a more sophisticated analysis is needed for risk management in urban areas. Principals of methods needed for decision making are presented. These methods are based on a single criteria (regular constraint), on a few criteria that can be measured (cost-benefit), or a number of criteria at choice. These rather general methods should be adaptable to be applied for specific domain. For risk management the following adaptation are presented: identifying the limit of maximum individual risk (generalisation of regular constraint); adoption of different values of human life as a function of nature of consequences (generalisation of cost-benefit method), application of risk avoidance factors. These different developments predict versions of tools for decision making which can be applicable to risk management in urban areas [fr

  1. Ecological risk assessment of hydropower dam construction based on ecological network analysis

    OpenAIRE

    Chen, Shaoqing; Fath, Brian D.; Chen, Bin

    2010-01-01

    Dam construction is regarded as one of the major factors contributing to significant modifications of the river ecosystems, and the ecological risk (ER) assessment of dam construction has received growing attention in recent years. In the present study, we explored the potential ecological risk caused by dam project based on the general principles of the ecological risk assessment. Ecological network analysis was proposed as the usable analytic method for the implement of ecological risk asse...

  2. AGROFOREST SYSTEM INVESTMENT ANALYSIS UNDER RISK

    Directory of Open Access Journals (Sweden)

    Luiz Moreira Coelho Junior

    2008-12-01

    Full Text Available Agroforestry System is the ecological and economical interaction of the use of the land, with the combination ofagriculture, livestock and forest production, in temporary sequence and in a simultaneous way. The studies of investments in projectsassume the existence of risks and uncertainties. An alternative to reduce the risk in the forest investment is the association with theagricultural. This work analyzed the situations of risk of a system agroflorestal. Monte Carlo s method comes from the theory ofsimulations and stands out as a powerful and useful tool to provide a distribution of probabilities for the analysis of decision. A totalof 10,000 interactions of the Net Present Value (VPL, of Internal Rate of Return (TIR and of the Equivalent Periodic Benefit (BPEwere made in order to establish the probability distribution. The results presented 78.65% of chance of VPL being US$ 1,410.00;77.56% of chance of TIR being 36.36%, and; 75.39% of chance of BPE being US$ 309.70; the agroforestry system presented lowinvestment risk; and the livestock is the main product of the agrossilvopastoril system, followed by charcoal.

  3. Advanced risk analysis of systems endangered by ESD

    International Nuclear Information System (INIS)

    Kiss, Istvan; Szedenik, Norbert; Nemeth, Balint; Gulyas, Attila; Berta, Istvan

    2008-01-01

    Evaluation of industrial processes to determine risk of fire or explosion caused by electrostatic discharge (ESD) is even nowadays qualitative in most cases. Although qualitative analysis significantly helps to make an industrial process safer, it is based on the survey of the process and strongly subjective, depending on the estimation of an expert. Fault tree analysis is a traditional method to quantify the risk; it helps to select optimal protection. However, determination of top event, secondary events and basic events of the fault tree is difficult, especially the quantification of the probabilities of the basic events. In several cases no statistical information is available for most of the events. Using fuzzy membership functions instead of simple numbers for the quantification of probabilities makes it possible to take this uncertainty into consideration. Fuzzy logic based fault tree analysis of chemical processes were made to determine the effect of basic events on the probability of the top event (explosion or fire) and its reliability.

  4. The analysis of financial risk management application for NPP project in Indonesia

    International Nuclear Information System (INIS)

    Imam Bastori; Moch Djoko Birmano

    2012-01-01

    NPP Project is one of full dynamic, risky and challenging business. Application of financial risk management t in Nuclear Power Plant (NPP) project becomes one alternative to be considered carefully. This paper explains an analysis to make a decision in the risk management application so that it can be applied in the NPP's construction in Indonesia. As case study, is NPP of conventional PWR type of class 1150 MWe. To calculate the economics and financing of NPP is used Spreadsheet INOVASI, further the decision of financial risk management were analyzed using a Model of Cash Flow Adjustment, which developed by Richard Fairchild. The analysis showed that the Method of Cash Flow Adjustment developed by Richard Fairchild is better than the method of NPV Adjustment on a NPP project, because it have included the aspects of financial risk management. NPP project can only be executed if the NPV 2 0 and decision to execute the financial risk management should be based on NPVrm > NPV. The application of financial risk management in NPP project is not needed if an insurance premium more expensive than all costs of financial distress, unless the insurance company can give discount of at least 20%. (author)

  5. Barrier and operational risk analysis of hydrocarbon releases (BORA-Release)

    International Nuclear Information System (INIS)

    Sklet, Snorre; Vinnem, Jan Erik; Aven, Terje

    2006-01-01

    This paper presents results from a case study carried out on an offshore oil and gas production platform with the purpose to apply and test BORA-Release, a method for barrier and operational risk analysis of hydrocarbon releases. A description of the BORA-Release method is given in Part I of the paper. BORA-Release is applied to express the platform specific hydrocarbon release frequencies for three release scenarios for selected systems and activities on the platform. The case study demonstrated that the BORA-Release method is a useful tool for analysing the effect on the release frequency of safety barriers introduced to prevent hydrocarbon releases, and to study the effect on the barrier performance of platform specific conditions of technical, human, operational, and organisational risk influencing factors (RIFs). BORA-Release may also be used to analyse the effect on the release frequency of risk reducing measures

  6. Analysis and Assessment of Operation Risk for Hybrid AC/DC Power System based on the Monte Carlo Method

    Science.gov (United States)

    Hu, Xiaojing; Li, Qiang; Zhang, Hao; Guo, Ziming; Zhao, Kun; Li, Xinpeng

    2018-06-01

    Based on the Monte Carlo method, an improved risk assessment method for hybrid AC/DC power system with VSC station considering the operation status of generators, converter stations, AC lines and DC lines is proposed. According to the sequential AC/DC power flow algorithm, node voltage and line active power are solved, and then the operation risk indices of node voltage over-limit and line active power over-limit are calculated. Finally, an improved two-area IEEE RTS-96 system is taken as a case to analyze and assessment its operation risk. The results show that the proposed model and method can intuitively and directly reflect the weak nodes and weak lines of the system, which can provide some reference for the dispatching department.

  7. Analysis and Assessment of Operation Risk for Hybrid AC/DC Power System based on the Monte Carlo Method

    Directory of Open Access Journals (Sweden)

    Hu Xiaojing

    2018-01-01

    Full Text Available Based on the Monte Carlo method, an improved risk assessment method for hybrid AC/DC power system with VSC station considering the operation status of generators, converter stations, AC lines and DC lines is proposed. According to the sequential AC/DC power flow algorithm, node voltage and line active power are solved, and then the operation risk indices of node voltage over-limit and line active power over-limit are calculated. Finally, an improved two-area IEEE RTS-96 system is taken as a case to analyze and assessment its operation risk. The results show that the proposed model and method can intuitively and directly reflect the weak nodes and weak lines of the system, which can provide some reference for the dispatching department.

  8. ESTIMATING RISK ON THE CAPITAL MARKET WITH VaR METHOD

    Directory of Open Access Journals (Sweden)

    Sinisa Bogdan

    2015-06-01

    Full Text Available The two basic questions that every investor tries to answer before investment are questions about predicting return and risk. Risk and return are generally considered two positively correlated sizes, during the growth of risk it is expected increase of return to compensate the higher risk. The quantification of risk in the capital market represents the current topic since occurrence of securities. Together with estimated future returns it represents starting point of any investment. In this study it is described the history of the emergence of VaR methods, usefulness in assessing the risks of financial assets. Three main Value at Risk (VaR methodologies are decribed and explained in detail: historical method, parametric method and Monte Carlo method. After the theoretical review of VaR methods it is estimated risk of liquid stocks and portfolio from the Croatian capital market with historical and parametric VaR method, after which the results were compared and explained.

  9. Train integrity detection risk analysis based on PRISM

    Science.gov (United States)

    Wen, Yuan

    2018-04-01

    GNSS based Train Integrity Monitoring System (TIMS) is an effective and low-cost detection scheme for train integrity detection. However, as an external auxiliary system of CTCS, GNSS may be influenced by external environments, such as uncertainty of wireless communication channels, which may lead to the failure of communication and positioning. In order to guarantee the reliability and safety of train operation, a risk analysis method of train integrity detection based on PRISM is proposed in this article. First, we analyze the risk factors (in GNSS communication process and the on-board communication process) and model them. Then, we evaluate the performance of the model in PRISM based on the field data. Finally, we discuss how these risk factors influence the train integrity detection process.

  10. The prostate cancer risk stratification (ProCaRS) project: Recursive partitioning risk stratification analysis

    International Nuclear Information System (INIS)

    Rodrigues, George; Lukka, Himu; Warde, Padraig; Brundage, Michael; Souhami, Luis; Crook, Juanita; Cury, Fabio; Catton, Charles; Mok, Gary; Martin, Andre-Guy; Vigneault, Eric; Morris, Jim; Warner, Andrew; Gonzalez Maldonado, Sandra; Pickles, Tom

    2013-01-01

    Background: The Genitourinary Radiation Oncologists of Canada (GUROC) published a three-group risk stratification (RS) system to assist prostate cancer decision-making in 2001. The objective of this project is to use the ProCaRS database to statistically model the predictive accuracy and clinical utility of a proposed new multi-group RS schema. Methods: The RS analyses utilized the ProCaRS database that consists of 7974 patients from four Canadian institutions. Recursive partitioning analysis (RPA) was utilized to explore the sub-stratification of groups defined by the existing three-group GUROC scheme. 10-fold cross-validated C-indices and the Net Reclassification Index were both used to assess multivariable models and compare the predictive accuracy of existing and proposed RS systems, respectively. Results: The recursive partitioning analysis has suggested that the existing GUROC classification system could be altered to accommodate as many as six separate and statistical unique groups based on differences in BFFS (C-index 0.67 and AUC 0.70). GUROC low-risk patients would be divided into new favorable-low and low-risk groups based on PSA ⩽6 and PSA >6. GUROC intermediate-risk patients can be subclassified into low-intermediate and high-intermediate groups. GUROC high-intermediate-risk is defined as existing GUROC intermediate-risk with PSA >=10 AND either T2b/c disease or T1T2a disease with Gleason 7. GUROC high-risk patients would be subclassified into an additional extreme-risk group (GUROC high-risk AND (positive cores ⩾87.5% OR PSA >30). Conclusions: Proposed RS subcategories have been identified by a RPA of the ProCaRS database

  11. Application of adversarial risk analysis model in pricing strategies with remanufacturing

    Directory of Open Access Journals (Sweden)

    Liurui Deng

    2015-01-01

    Full Text Available Purpose: Purpose: This paper mainly focus on the application of adversarial risk analysis (ARA in pricing strategy with remanufacturing. We hope to obtain more realistic results than classical model. Moreover, we also wish that our research improve the development of ARA in pricing strategy of manufacturing or remanufacturing. Approach: In order to gain more actual research, combining adversarial risk analysis, we explore the pricing strategy with remanufacturing based on Stackelberg model. Especially, we build OEM’s 1-order ARA model and further study on manufacturers and remanufacturers’ pricing strategy. Findings: We find the OEM’s 1-order ARA model for the OEM’s product cost C. Besides, we get according manufacturers and remanufacturers’ pricing strategies. Besides, the pricing strategies based on 1-order ARA model have advantage over than the classical model regardless of OEMs and remanufacturers. Research implications: The research on application of ARA imply that we can get more actual results with this kind of modern risk analysis method and ARA can be extensively in pricing strategies of supply chain. Value: Our research improves the application of ARA in remanufacturing industry. Meanwhile, inspired by this analysis, we can also create different ARA models for different parameters. Furthermore, some results and analysis methods can be applied to other pricing strategies of supply chain.

  12. Risks, costs and benefits analysis for exhumation of buried radioactive materials at a nuclear fuel fabrication facility

    International Nuclear Information System (INIS)

    Kirk, J.S.; Moore, R.A.; Huston, T.E.

    1996-01-01

    A Risks, Costs and Benefits analysis provides a tool for selecting a cost-effective remedial action alternative. This analysis can help avoid transferring risks to other populations and can objectively measure the benefits of a specific remedial action project. This paper describes the methods and results of a Risks, Costs and Benefits analysis performed at a nuclear fuel fabrication facility. The analysis examined exhuming and transporting radioactive waste to an offsite disposal facility. Risks evaluated for the remedial action project were divided into two categories: risks posed to the worker and risks posed to public health. Risks to workers included exposure to radioactive contaminants during excavation and packaging of waste materials and the use of heavy machinery. Potential public health risks included exposure to radioactive materials during transport from the exhumation site to the disposal facility. Methods included use of site-specific and published data, and existing computer models. Occupational risks were quantified using data from similar onsite remedial action projects. Computer modeling was used to evaluate public health risks from transporting radioactive materials; the consequences or probability of traffic accidents; and radiation exposure to potential inhabitants occupying the site considering various land use scenarios. A costs analysis was based on data obtained from similar onsite remedial action projects. Scenarios used to identify benefits resulting from the remedial action project included (1) an evaluation of reduction in risks to human health; (2) cost reductions associated with the unrestricted release of the property; and (3) benefits identified by evaluating regulatory mandates applicable to decommissioning. This paper will provide an overview of the methods used and a discussion of the results of a Risks, Costs and Benefits analysis for a site-specific remedial action scenario

  13. Environmental risk analysis for offshore oil and gas activities

    Energy Technology Data Exchange (ETDEWEB)

    Brude, Odd Willy; Aspholm, Ole O.; Rudberg, Anders [Det Norske Veritas (Brazil)

    2008-07-01

    Offshore oil and gas activities always have a risk for environmental impact due to potential accidental releases of oil and gas. The environmental risk can be calculated as a combination of the frequency of such accidents to occur and their environmental consequences in terms of environmental damage to habitats or populations. A method for conducting environmental risk analysis has been in use in Norwegian offshore waters for a decade, with a continuously refinement of methodology over the past years. This paper outlines the principles in the MIRA method and gives examples and discussions regarding use in different environmental compartments. The risk assessment starts with identification of oil spill scenarios with frequencies of potential release rates and spill durations. The next step is to model the oil drift for each accidental oil spill scenario. Drift and fate of oil is modeled probabilistic. Based on the oil spill scenarios and their probability of oil pollution, the potential environmental damage is quantified for each scenario. The endpoint of environmental damage is reduction of a population and the resulting recovery time (in years) for various species and habitats. Environmental risk levels are then evaluated against the operating companies' environmental acceptance criteria. (author)

  14. Analysis of dependent failures in risk assessment and reliability evaluation

    International Nuclear Information System (INIS)

    Fleming, K.N.; Mosleh, A.; Kelley, A.P. Jr.; Gas-Cooled Reactors Associates, La Jolla, CA)

    1983-01-01

    The ability to estimate the risk of potential reactor accidents is largely determined by the ability to analyze statistically dependent multiple failures. The importance of dependent failures has been indicated in recent probabilistic risk assessment (PRA) studies as well as in reports of reactor operating experiences. This article highlights the importance of several different types of dependent failures from the perspective of the risk and reliability analyst and provides references to the methods and data available for their analysis. In addition to describing the current state of the art, some recent advances, pitfalls, misconceptions, and limitations of some approaches to dependent failure analysis are addressed. A summary is included of the discourse on this subject, which is presented in the Institute of Electrical and Electronics Engineers/American Nuclear Society PRA Procedures Guide

  15. Flood risk perceptions and spatial multi-criteria analysis : an exploratory research for hazard mitigation

    NARCIS (Netherlands)

    Krywkow, J.; Raaijmakers, Ruud; Krywkow, Jörg; van der Veen, A.

    2007-01-01

    The conventional method of risk analysis (with risk as a product of probability and consequences) does not allow for a pluralistic approach that includes the various risk perceptions of stakeholders or lay people within a given social system. This article introduces a methodology that combines the

  16. Flood risk perceptions and spatial multi - criteria analysis : an exploratory research for hazard mitigation

    NARCIS (Netherlands)

    Raaijmakers, R.; Raaijmakers, Ruud; Krywkow, Jorg; van der Veen, A.

    2008-01-01

    The conventional method of risk analysis (with risk as a product of probability and consequences) does not allow for a pluralistic approach that includes the various risk perceptions of stakeholders or lay people within a given social system. This article introduces a methodology that combines the

  17. Flood risk perceptions and spatial multi-criteria analysis: an exploratory research for hazard mitigation

    NARCIS (Netherlands)

    Raaijmakers, R.; Raaijmakers, Ruud; Krywkow, Jorg; van der Veen, A.

    2008-01-01

    The conventional method of risk analysis (with risk as a product of probability and consequences) does not allow for a pluralistic approach that includes the various risk perceptions of stakeholders or lay people within a given social system. This article introduces a methodology that combines the

  18. WIPP fire hazards and risk analysis

    International Nuclear Information System (INIS)

    1991-05-01

    The purpose of this analysis was to conduct a fire hazards risk analysis of the Transuranic (TRU) contact-handled waste receipt, emplacement, and disposal activities at the Waste Isolation Pilot Plant (WIPP). The technical bases and safety envelope for these operations are defined in the approved WIPP Final Safety Analysis Report (FSAR). Although the safety documentation for the initial phase of the Test Program, the dry bin scale tests, has not yet been approved by the Department of Energy (DOE), reviews of the draft to date, including those by the Advisory Committee on Nuclear Facility Safety (ACNFS), have concluded that the dry bin scale tests present no significant risks in excess of those estimated in the approved WIPP FSAR. It is the opinion of the authors and reviewers of this analysis, based on sound engineering judgment and knowledge of the WIPP operations, that a Fire Hazards and Risk Analysis specific to the dry bin scale test program is not warranted prior to first waste receipt. This conclusion is further supported by the risk analysis presented in this document which demonstrates the level of risk to WIPP operations posed by fire to be extremely low. 15 refs., 41 figs., 48 tabs

  19. Risk Characterization uncertainties associated description, sensitivity analysis

    International Nuclear Information System (INIS)

    Carrillo, M.; Tovar, M.; Alvarez, J.; Arraez, M.; Hordziejewicz, I.; Loreto, I.

    2013-01-01

    The power point presentation is about risks to the estimated levels of exposure, uncertainty and variability in the analysis, sensitivity analysis, risks from exposure to multiple substances, formulation of guidelines for carcinogenic and genotoxic compounds and risk subpopulations

  20. Arenal-type pyroclastic flows: A probabilistic event tree risk analysis

    Science.gov (United States)

    Meloy, Anthony F.

    2006-09-01

    A quantitative hazard-specific scenario-modelling risk analysis is performed at Arenal volcano, Costa Rica for the newly recognised Arenal-type pyroclastic flow (ATPF) phenomenon using an event tree framework. These flows are generated by the sudden depressurisation and fragmentation of an active basaltic andesite lava pool as a result of a partial collapse of the crater wall. The deposits of this type of flow include angular blocks and juvenile clasts, which are rarely found in other types of pyroclastic flow. An event tree analysis (ETA) is a useful tool and framework in which to analyse and graphically present the probabilities of the occurrence of many possible events in a complex system. Four event trees are created in the analysis, three of which are extended to investigate the varying individual risk faced by three generic representatives of the surrounding community: a resident, a worker, and a tourist. The raw numerical risk estimates determined by the ETA are converted into a set of linguistic expressions (i.e. VERY HIGH, HIGH, MODERATE etc.) using an established risk classification scale. Three individually tailored semi-quantitative risk maps are then created from a set of risk conversion tables to show how the risk varies for each individual in different areas around the volcano. In some cases, by relocating from the north to the south, the level of risk can be reduced by up to three classes. While the individual risk maps may be broadly applicable, and therefore of interest to the general community, the risk maps and associated probability values generated in the ETA are intended to be used by trained professionals and government agencies to evaluate the risk and effectively manage the long-term development of infrastructure and habitation. With the addition of fresh monitoring data, the combination of both long- and short-term event trees would provide a comprehensive and consistent method of risk analysis (both during and pre-crisis), and as such

  1. Integration of risk matrix and event tree analysis: a natural stone ...

    Indian Academy of Sciences (India)

    M Kemal Özfirat

    2017-09-27

    Sep 27, 2017 ... Different types of accidents may occur in natural stone facilities during movement, dimensioning, cutting ... are numerous risk analysis methods such as preliminary ..... machine type and maintenance (MM) event, block control.

  2. Advances in Risk Analysis with Big Data.

    Science.gov (United States)

    Choi, Tsan-Ming; Lambert, James H

    2017-08-01

    With cloud computing, Internet-of-things, wireless sensors, social media, fast storage and retrieval, etc., organizations and enterprises have access to unprecedented amounts and varieties of data. Current risk analysis methodology and applications are experiencing related advances and breakthroughs. For example, highway operations data are readily available, and making use of them reduces risks of traffic crashes and travel delays. Massive data of financial and enterprise systems support decision making under risk by individuals, industries, regulators, etc. In this introductory article, we first discuss the meaning of big data for risk analysis. We then examine recent advances in risk analysis with big data in several topic areas. For each area, we identify and introduce the relevant articles that are featured in the special issue. We conclude with a discussion on future research opportunities. © 2017 Society for Risk Analysis.

  3. Economic analysis of alternative LLW disposal methods

    International Nuclear Information System (INIS)

    Foutes, C.E.

    1987-01-01

    The Environmental Protection Agency (EPA) has evaluated the costs and benefits of alternative disposal technologies as part of its program to develop generally applicable environmental standards for the land disposal of low-level radioactive waste (LLW). Costs, population health effects and Critical Population Group (CPG) exposures resulting from alternative waste treatment and disposal methods were developed and input into the analysis. The cost-effectiveness analysis took into account a number of waste streams, hydrogeologic and climatic region settings, and waste treatment and disposal methods. Total costs of each level of a standard included costs for packaging, processing, transportation, and burial of waste. Benefits are defined in terms of reductions in the general population health risk (expected fatal cancers and genetic effects) evaluated over 10,000 years. A cost-effectiveness ratio, was calculated for each alternative standard. This paper describes the alternatives considered and preliminary results of the cost-effectiveness analysis

  4. Overcoming barriers to integrating economic analysis into risk assessment.

    Science.gov (United States)

    Hoffmann, Sandra

    2011-09-01

    Regulatory risk analysis is designed to provide decisionmakers with a clearer understanding of how policies are likely to affect risk. The systems that produce risk are biological, physical, and social and economic. As a result, risk analysis is an inherently interdisciplinary task. Yet in practice, risk analysis has been interdisciplinary in only limited ways. Risk analysis could provide more accurate assessments of risk if there were better integration of economics and other social sciences into risk assessment itself. This essay examines how discussions about risk analysis policy have influenced the roles of various disciplines in risk analysis. It explores ways in which integrated bio/physical-economic modeling could contribute to more accurate assessments of risk. It reviews examples of the kind of integrated economics-bio/physical modeling that could be used to enhance risk assessment. The essay ends with a discussion of institutional barriers to greater integration of economic modeling into risk assessment and provides suggestions on how these might be overcome. © 2011 Society for Risk Analysis.

  5. Fault trees and the impact of human variability on probabilistic risk analysis

    International Nuclear Information System (INIS)

    1983-01-01

    It has long been recognized that human reliability is an important factor in probabilistic risk analysis. In the field, this is true in a direct operational sense as well as in the areas of installation and maintenance. The interest in quantification arises from the desire to achieve optimum design in the human factors sense (operability-maintainability) and from the need to include human reliability considerations in probabilistic risk analysis to achieve complete and valid risk evaluation. In order to integrate human reliability into the system analysis, it is necessary to consider two questions. These relate to the way that human functions fit into the existing analytical models and methods as well as the nature of human failure mechanisms, modes and failure (error) rates

  6. A utility/cost analysis of breast cancer risk prediction algorithms

    Science.gov (United States)

    Abbey, Craig K.; Wu, Yirong; Burnside, Elizabeth S.; Wunderlich, Adam; Samuelson, Frank W.; Boone, John M.

    2016-03-01

    Breast cancer risk prediction algorithms are used to identify subpopulations that are at increased risk for developing breast cancer. They can be based on many different sources of data such as demographics, relatives with cancer, gene expression, and various phenotypic features such as breast density. Women who are identified as high risk may undergo a more extensive (and expensive) screening process that includes MRI or ultrasound imaging in addition to the standard full-field digital mammography (FFDM) exam. Given that there are many ways that risk prediction may be accomplished, it is of interest to evaluate them in terms of expected cost, which includes the costs of diagnostic outcomes. In this work we perform an expected-cost analysis of risk prediction algorithms that is based on a published model that includes the costs associated with diagnostic outcomes (true-positive, false-positive, etc.). We assume the existence of a standard screening method and an enhanced screening method with higher scan cost, higher sensitivity, and lower specificity. We then assess expected cost of using a risk prediction algorithm to determine who gets the enhanced screening method under the strong assumption that risk and diagnostic performance are independent. We find that if risk prediction leads to a high enough positive predictive value, it will be cost-effective regardless of the size of the subpopulation. Furthermore, in terms of the hit-rate and false-alarm rate of the of the risk prediction algorithm, iso-cost contours are lines with slope determined by properties of the available diagnostic systems for screening.

  7. [Modular risk analysis for assessing multiple waste sites]: Proceedings

    International Nuclear Information System (INIS)

    Whelan, G.

    1994-01-01

    This document contains proceedings from the Integrated Planning Workshop from Strategic Planning to Baselining and Other Objectives. Topics discussed include: stakeholder involvement; regulations; future site use planning; site integration and baseline methods; risk analysis in decision making; land uses; and economics in decision making. Individual records have been processed separately for the database

  8. Methods for cost-benefit-risk analysis of material-accounting upgrades

    International Nuclear Information System (INIS)

    Fishbone, L.G.; Gordon, D.M.; Higinbotham, W.; Keisch, B.

    1988-01-01

    The authors have developed a cost-benefit-risk methodology for evaluating material-accounting upgrades at key measurement points in nuclear facilities. The focus of this methodology is on nuclear-material measurements and their effects on inventory differences and shipper/receiver differences. The methodology has three main components: cost, benefits, and risk factors. The fundamental outcome of the methodology is therefore cost-benefit ratios characterizing the proposed upgrades, with the risk factors applied as necessary to the benefits. Examples illustrate the methodology's use

  9. Dealing with poor data quality of OSINT data in fraud risk analysis

    NARCIS (Netherlands)

    van Keulen, Maurice

    2015-01-01

    Governmental organizations responsible for keeping certain types of fraud under control, often use data-driven methods for both immediate detection of fraud, or for fraud risk analysis aimed at more effectively targeting inspections. A blind spot in such methods, is that the source data often

  10. Integrating risk analysis and multi-criteria decision support under uncertainty in electricity distribution system asset management

    International Nuclear Information System (INIS)

    Catrinu, M.D.; Nordgard, D.E.

    2011-01-01

    Asset managers in electricity distribution companies generally recognize the need and the challenge of adding structure and a higher degree of formal analysis into the increasingly complex asset management decisions. This implies improving the present asset management practice by making the best use of the available data and expert knowledge and by adopting new methods for risk analysis and decision support and nevertheless better ways to document the decisions made. This paper discusses methods for integrating risk analysis and multi-criteria decision support under uncertainty in electricity distribution system asset management. The focus is on how to include the different company objectives and risk analyses into a structured decision framework when deciding how to handle the physical assets of the electricity distribution network. This paper presents an illustrative example of decision support for maintenance and reinvestment strategies based, using expert knowledge, simplified risk analyses and multi-criteria decision analysis under uncertainty.

  11. Application of a risk analysis method to different technologies for producing a monoclonal antibody employed in hepatitis B vaccine manufacturing.

    Science.gov (United States)

    Milá, Lorely; Valdés, Rodolfo; Tamayo, Andrés; Padilla, Sigifredo; Ferro, Williams

    2012-03-01

    CB.Hep-1 monoclonal antibody (mAb) is used for a recombinant Hepatitis B vaccine manufacturing, which is included in a worldwide vaccination program against Hepatitis B disease. The use of this mAb as immunoligand has been addressed into one of the most efficient steps of active pharmaceutical ingredient purification process. Regarding this, Quality Risk Management (QRM) provides an excellent framework for the risk management use in pharmaceutical manufacturing and quality decision-making applications. Consequently, this study sought applying a prospective risk analysis methodology Failure Mode Effects Analysis (FMEA) as QRM tool for analyzing different CB.Hep-1 mAb manufacturing technologies. As main conclusions FMEA was successfully used to assess risks associated with potential problems in CB.Hep-1 mAb manufacturing processes. The severity and occurrence of risks analysis evidenced that the percentage of very high severe risks ranged 31.0-38.7% of all risks and the huge majority of risks have a very low occurrence level (61.9-83.3%) in all assessed technologies. Finally, additive Risk Priority Number, was descending ordered as follow: transgenic plants (2636), ascites (2577), transgenic animals (2046) and hollow fiber bioreactors (1654), which also corroborated that in vitro technology, should be the technology of choice for CB.Hep-1 mAb manufacturing in terms of risks and mAb molecule quality. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  12. Probabilistic risk analysis for nuclear power plants

    International Nuclear Information System (INIS)

    Hauptmanns, U.

    1988-01-01

    Risk analysis is applied if the calculation of risk from observed failures is not possible, because events contributing substantially to risk are too seldom, as in the case of nuclear reactors. The process of analysis provides a number of benefits. Some of them are listed. After this by no means complete enumeration of possible benefits to be derived from a risk analysis. An outline of risk studiesd for PWR's with some comments on the models used are given. The presentation is indebted to the detailed treatment of the subject given in the PRA Procedures Guide. Thereafter some results of the German Risk Study, Phase B, which is under way are communicated. The paper concludes with some remarks on probabilistic considerations in licensing procedures. (orig./DG)

  13. 31 CFR 223.11 - Limitation of risk: Protective methods.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Limitation of risk: Protective methods. 223.11 Section 223.11 Money and Finance: Treasury Regulations Relating to Money and Finance... BUSINESS WITH THE UNITED STATES § 223.11 Limitation of risk: Protective methods. The limitation of risk...

  14. SU-F-T-243: Major Risks in Radiotherapy. A Review Based On Risk Analysis Literature

    Energy Technology Data Exchange (ETDEWEB)

    López-Tarjuelo, J; Guasp-Tortajada, M; Iglesias-Montenegro, N; Monasor-Denia, P [Servicio de Radiofísica y Protección Radiológica, Consorcio Hospitalario Provincial de Castellón, Castellón de la Plana, España/Spain (Spain); Bouché-Babiloni, A; Morillo-Macías, V; Ferrer-Albiach, C [Servicio de Oncología Radioterápica, Consorcio Hospitalario Provincial de Castellón, Castellón de la Plana, España/Spain (Spain)

    2016-06-15

    Purpose: We present a literature review of risk analyses in radiotherapy to highlight the most reported risks and facilitate the spread of this valuable information so that professionals can be aware of these major threats before performing their own studies. Methods: We considered studies with at least an estimation of the probability of occurrence of an adverse event (O) and its associated severity (S). They cover external beam radiotherapy, brachytherapy, intraoperative radiotherapy, and stereotactic techniques. We selected only the works containing a detailed ranked series of elements or failure modes and focused on the first fully reported quartile as much. Afterward, we sorted the risk elements according to a regular radiotherapy procedure so that the resulting groups were cited in several works and be ranked in this way. Results: 29 references published between 2007 and February 2016 were studied. Publication trend has been generally rising. The most employed analysis has been the Failure mode and effect analysis (FMEA). Among references, we selected 20 works listing 258 ranked risk elements. They were sorted into 31 groups appearing at least in two different works. 11 groups appeared in at least 5 references and 5 groups did it in 7 or more papers. These last sets of risks where choosing another set of images or plan for planning or treating, errors related with contours, errors in patient positioning for treatment, human mistakes when programming treatments, and planning errors. Conclusion: There is a sufficient amount and variety of references for identifying which failure modes or elements should be addressed in a radiotherapy department before attempting a specific analysis. FMEA prevailed, but other studies such as “risk matrix” or “occurrence × severity” analyses can also lead professionals’ efforts. Risk associated with human actions ranks very high; therefore, they should be automated or at least peer-reviewed.

  15. SU-F-T-243: Major Risks in Radiotherapy. A Review Based On Risk Analysis Literature

    International Nuclear Information System (INIS)

    López-Tarjuelo, J; Guasp-Tortajada, M; Iglesias-Montenegro, N; Monasor-Denia, P; Bouché-Babiloni, A; Morillo-Macías, V; Ferrer-Albiach, C

    2016-01-01

    Purpose: We present a literature review of risk analyses in radiotherapy to highlight the most reported risks and facilitate the spread of this valuable information so that professionals can be aware of these major threats before performing their own studies. Methods: We considered studies with at least an estimation of the probability of occurrence of an adverse event (O) and its associated severity (S). They cover external beam radiotherapy, brachytherapy, intraoperative radiotherapy, and stereotactic techniques. We selected only the works containing a detailed ranked series of elements or failure modes and focused on the first fully reported quartile as much. Afterward, we sorted the risk elements according to a regular radiotherapy procedure so that the resulting groups were cited in several works and be ranked in this way. Results: 29 references published between 2007 and February 2016 were studied. Publication trend has been generally rising. The most employed analysis has been the Failure mode and effect analysis (FMEA). Among references, we selected 20 works listing 258 ranked risk elements. They were sorted into 31 groups appearing at least in two different works. 11 groups appeared in at least 5 references and 5 groups did it in 7 or more papers. These last sets of risks where choosing another set of images or plan for planning or treating, errors related with contours, errors in patient positioning for treatment, human mistakes when programming treatments, and planning errors. Conclusion: There is a sufficient amount and variety of references for identifying which failure modes or elements should be addressed in a radiotherapy department before attempting a specific analysis. FMEA prevailed, but other studies such as “risk matrix” or “occurrence × severity” analyses can also lead professionals’ efforts. Risk associated with human actions ranks very high; therefore, they should be automated or at least peer-reviewed.

  16. Single-shell tank interim stabilization risk analysis

    International Nuclear Information System (INIS)

    Basche, A.D.

    1998-01-01

    The purpose of the Single-Shell Tank (SST) Interim Stabilization Risk Analysis is to provide a cost and schedule risk analysis of HNF-2358, Rev. 1, Single-Shell Tank Interim Stabilization Project Plan (Project Plan) (Ross et al. 1998). The analysis compares the required cost profile by fiscal year (Section 4.2) and revised schedule completion date (Section 4.5) to the Project Plan. The analysis also evaluates the executability of the Project Plan and recommends a path forward for risk mitigation

  17. Framework for generating expert systems to perform computer security risk analysis

    International Nuclear Information System (INIS)

    Smith, S.T.; Lim, J.J.

    1985-01-01

    At Los Alamos we are developing a framework to generate knowledge-based expert systems for performing automated risk analyses upon a subject system. The expert system is a computer program that models experts' knowledge about a topic, including facts, assumptions, insights, and decision rationale. The subject system, defined as the collection of information, procedures, devices, and real property upon which the risk analysis is to be performed, is a member of the class of systems that have three identifying characteristics: a set of desirable assets (or targets), a set of adversaries (or threats) desiring to obtain or to do harm to the assets, and a set of protective mechanisms to safeguard the assets from the adversaries. Risk analysis evaluates both vulnerability to and the impact of successful threats against the targets by determining the overall effectiveness of the subject system safeguards, identifying vulnerabilities in that set of safeguards, and determining cost-effective improvements to the safeguards. As a testbed, we evaluate the inherent vulnerabilities and risks in a system of computer security safeguards. The method considers safeguards protecting four generic targets (physical plant of the computer installation, its hardware, its software, and its documents and displays) against three generic threats (natural hazards, direct human actions requiring the presence of the adversary, and indirect human actions wherein the adversary is not on the premises-perhaps using such access tools as wiretaps, dialup lines, and so forth). Our automated procedure to assess the effectiveness of computer security safeguards differs from traditional risk analysis methods

  18. An evaluation of risk methods for prioritizing fire protection features: a procedure for fire barrier penetration seals

    International Nuclear Information System (INIS)

    Dey, M.K.

    2004-01-01

    This paper generally evaluates risk methods available for prioritizing fire protection features. Risk methods involving both the use of qualitative insights, and quantitative results from a fire probabilistic risk analysis are reviewed. The applicability of these methods to develop a prioritized list of fire barrier penetration seals in a plant based on risk significance is presented as a procedure to illustrate the benefits of the methods. The paper concludes that current fire risk assessment methods can be confidently used to prioritize plant fire protection features, specifically fire barrier penetration seals. Simple prioritization schemes, using qualitative assessments and insights from fire PRA methodology may be implemented without the need for quantitative results. More elaborate prioritization schemes that allow further refinements to the categorization process may be implemented using the quantitative results of the screening processes in good fire PRAs. The use of the quantitative results from good fire PRAs provide several benefits for risk prioritization of fire protection features at plants, mainly from the plant systems analyses conducted for a fire PRA

  19. Natural disaster risk analysis for critical infrastructure systems: An approach based on statistical learning theory

    International Nuclear Information System (INIS)

    Guikema, Seth D.

    2009-01-01

    Probabilistic risk analysis has historically been developed for situations in which measured data about the overall reliability of a system are limited and expert knowledge is the best source of information available. There continue to be a number of important problem areas characterized by a lack of hard data. However, in other important problem areas the emergence of information technology has transformed the situation from one characterized by little data to one characterized by data overabundance. Natural disaster risk assessments for events impacting large-scale, critical infrastructure systems such as electric power distribution systems, transportation systems, water supply systems, and natural gas supply systems are important examples of problems characterized by data overabundance. There are often substantial amounts of information collected and archived about the behavior of these systems over time. Yet it can be difficult to effectively utilize these large data sets for risk assessment. Using this information for estimating the probability or consequences of system failure requires a different approach and analysis paradigm than risk analysis for data-poor systems does. Statistical learning theory, a diverse set of methods designed to draw inferences from large, complex data sets, can provide a basis for risk analysis for data-rich systems. This paper provides an overview of statistical learning theory methods and discusses their potential for greater use in risk analysis

  20. Risk Analysis for Road Tunnels – A Metamodel to Efficiently Integrate Complex Fire Scenarios

    DEFF Research Database (Denmark)

    Berchtold, Florian; Knaust, Christian; Arnold, Lukas

    2018-01-01

    Fires in road tunnels constitute complex scenarios with interactions between the fire, tunnel users and safety measures. More and more methodologies for risk analysis quantify the consequences of these scenarios with complex models. Examples for complex models are the computational fluid dynamics...... complex scenarios in risk analysis. To face this challenge, we improved the metamodel used in the methodology for risk analysis presented on ISTSS 2016. In general, a metamodel quickly interpolates the consequences of few scenarios simulated with the complex models to a large number of arbitrary scenarios...... used in risk analysis. Now, our metamodel consists of the projection array-based design, the moving least squares method, and the prediction interval to quantify the metamodel uncertainty. Additionally, we adapted the projection array-based design in two ways: the focus of the sequential refinement...

  1. A Bayesian approach to probabilistic sensitivity analysis in structured benefit-risk assessment.

    Science.gov (United States)

    Waddingham, Ed; Mt-Isa, Shahrul; Nixon, Richard; Ashby, Deborah

    2016-01-01

    Quantitative decision models such as multiple criteria decision analysis (MCDA) can be used in benefit-risk assessment to formalize trade-offs between benefits and risks, providing transparency to the assessment process. There is however no well-established method for propagating uncertainty of treatment effects data through such models to provide a sense of the variability of the benefit-risk balance. Here, we present a Bayesian statistical method that directly models the outcomes observed in randomized placebo-controlled trials and uses this to infer indirect comparisons between competing active treatments. The resulting treatment effects estimates are suitable for use within the MCDA setting, and it is possible to derive the distribution of the overall benefit-risk balance through Markov Chain Monte Carlo simulation. The method is illustrated using a case study of natalizumab for relapsing-remitting multiple sclerosis. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. A Proposal of Operational Risk Management Method Using FMEA for Drug Manufacturing Computerized System

    Science.gov (United States)

    Takahashi, Masakazu; Nanba, Reiji; Fukue, Yoshinori

    This paper proposes operational Risk Management (RM) method using Failure Mode and Effects Analysis (FMEA) for drug manufacturing computerlized system (DMCS). The quality of drug must not be influenced by failures and operational mistakes of DMCS. To avoid such situation, DMCS has to be conducted enough risk assessment and taken precautions. We propose operational RM method using FMEA for DMCS. To propose the method, we gathered and compared the FMEA results of DMCS, and develop a list that contains failure modes, failures and countermeasures. To apply this list, we can conduct RM in design phase, find failures, and conduct countermeasures efficiently. Additionally, we can find some failures that have not been found yet.

  3. Case study on the use of PSA methods: Station blackout risk at Millstone Unit 3

    International Nuclear Information System (INIS)

    1991-04-01

    In Westinghouse pressurized water reactors, severe accidents sequences resulting from station blackout have been recognized to be significant contributors to risk of core damage and public consequences. To properly quantify the risk of station blackout it is necessary to consider all possible types of core damage scenarios. Having obtained an accurate representation of the types of core damage scenarios involved specific areas of vulnerability can be pinpointed for further improvement. In performing this analysis it was decided to use time dependent probabilistic safety assessment method to provide a more realistic treatment of time dependent failure and recovery. Overview of the analysis, calculation procedures and methods, interpretation of the results are discussed. Peer review process is described. 13 refs, 19 figs

  4. Risk-benefit analysis and cost-effectiveness analysis of lung cancer screening by spiral CT

    International Nuclear Information System (INIS)

    Iinuma, Takeshi

    1999-01-01

    Mass screening of lung cancer has been widely performed using indirect chest X-ray method in Japan. However reduction of the mortality for lung cancer is questioned. We have proposed that recently developed spiral CT should be adopted for the screening of lung cancer, since CT has an excellent detectability for small nodule. Lung Cancer Screening CT (LSCT) has been developed by author's group using spiral CT with low dose and light weight in order to make a mobile unit. In this paper risk-benefit analysis and cost-effectiveness analysis are described for the LSCT screening of lung cancer. As a risk, radiation carcinogenesis due to exposure from LSCT are compared with gain of life-expectancy by screening and men of 40 years or more and women of 45 years or more are justified. The cost per person-year is estimated for LSCT screening which is better than that of present method, although total cost is higher. The LSCT screening could be recommended if total cost is affordable. (author)

  5. Computational methods in the pricing and risk management of modern financial derivatives

    Science.gov (United States)

    Deutsch, Hans-Peter

    1999-09-01

    In the last 20 years modern finance has developed into a complex mathematically challenging field. Very complicated risks exist in financial markets which need very advanced methods to measure and/or model them. The financial instruments invented by the market participants to trade these risk, the so called derivatives are usually even more complicated than the risks themselves and also sometimes generate new riks. Topics like random walks, stochastic differential equations, martingale measures, time series analysis, implied correlations, etc. are of common use in the field. This is why more and more people with a science background, such as physicists, mathematicians, or computer scientists, are entering the field of finance. The measurement and management of all theses risks is the key to the continuing success of banks. This talk gives insight into today's common methods of modern market risk management such as variance-covariance, historical simulation, Monte Carlo, “Greek” ratios, etc., including the statistical concepts on which they are based. Derivatives are at the same time the main reason for and the most effective means of conducting risk management. As such, they stand at the beginning and end of risk management. The valuation of derivatives and structured financial instruments is therefore the prerequisite, the condition sine qua non, for all risk management. This talk introduces some of the important valuation methods used in modern derivatives pricing such as present value, Black-Scholes, binomial trees, Monte Carlo, etc. In summary this talk highlights an area outside physics where there is a lot of interesting work to do, especially for physicists. Or as one of our consultants said: The fascinating thing about this job is that Arthur Andersen hired me not ALTHOUGH I am a physicist but BECAUSE I am a physicist.

  6. Campylobacter Risk Analysis

    DEFF Research Database (Denmark)

    Nauta, Maarten

    In several countries quantitative microbiological risk assessments (QMRAs) have been performed for Campylobacter in chicken meat. The models constructed for this purpose provide a good example of the development of QMRA in general and illustrate the diversity of available methods. Despite...... the differences between the models, the most prominent conclusions of the QMRAs are similar. These conclusions for example relate to the large risk of highly contaminated meat products and the insignificance of contamination from Campylobacter positive flocks to negative flocks during slaughter and processing...

  7. Analysis of the LaSalle Unit 2 Nuclear Power Plant, Risk Methods Integration and Evaluation Program (RMIEP)

    International Nuclear Information System (INIS)

    Ferrell, W.L.; Payne, A.C. Jr.; Daniel, S.L.

    1992-10-01

    This report is a description of the internal flood analysis performed on the LaSalle County Nuclear Generating Station, Unit 2. A more detailed integration with the internal events analysis than in prior flood risk assessments was accomplished. The same system fault trees used for the internal events analysis were also used for the flood analysis, which included modeling of components down to the contact pair level. Subsidiary equations were created to map the effects of pipe failures. All component locations were traced and mapped into the fault trees. The effects of floods were then mapped directly onto the internal plant model and their relative importance was evaluated. A detailed screening analysis was performed which showed that most plant areas had a negligible contribution to the flood-induced core damage frequency. This was influenced strongly by the fact that the LaSalle plant was designed with a high level of concern about the effects of external events such as fire and flood and significant separation was maintained between systems in the original design. Detailed analysis of the remaining flood scenarios identified only two that contributed significantly to risk. The flood analysis resulted in a total (mean) core damage frequency of 3.23E-6 per year

  8. Issues in benchmarking human reliability analysis methods: A literature review

    International Nuclear Information System (INIS)

    Boring, Ronald L.; Hendrickson, Stacey M.L.; Forester, John A.; Tran, Tuan Q.; Lois, Erasmia

    2010-01-01

    There is a diversity of human reliability analysis (HRA) methods available for use in assessing human performance within probabilistic risk assessments (PRA). Due to the significant differences in the methods, including the scope, approach, and underlying models, there is a need for an empirical comparison investigating the validity and reliability of the methods. To accomplish this empirical comparison, a benchmarking study comparing and evaluating HRA methods in assessing operator performance in simulator experiments is currently underway. In order to account for as many effects as possible in the construction of this benchmarking study, a literature review was conducted, reviewing past benchmarking studies in the areas of psychology and risk assessment. A number of lessons learned through these studies is presented in order to aid in the design of future HRA benchmarking endeavors.

  9. Issues in benchmarking human reliability analysis methods : a literature review.

    Energy Technology Data Exchange (ETDEWEB)

    Lois, Erasmia (US Nuclear Regulatory Commission); Forester, John Alan; Tran, Tuan Q. (Idaho National Laboratory, Idaho Falls, ID); Hendrickson, Stacey M. Langfitt; Boring, Ronald L. (Idaho National Laboratory, Idaho Falls, ID)

    2008-04-01

    There is a diversity of human reliability analysis (HRA) methods available for use in assessing human performance within probabilistic risk assessment (PRA). Due to the significant differences in the methods, including the scope, approach, and underlying models, there is a need for an empirical comparison investigating the validity and reliability of the methods. To accomplish this empirical comparison, a benchmarking study is currently underway that compares HRA methods with each other and against operator performance in simulator studies. In order to account for as many effects as possible in the construction of this benchmarking study, a literature review was conducted, reviewing past benchmarking studies in the areas of psychology and risk assessment. A number of lessons learned through these studies are presented in order to aid in the design of future HRA benchmarking endeavors.

  10. New methods for fall risk prediction.

    Science.gov (United States)

    Ejupi, Andreas; Lord, Stephen R; Delbaere, Kim

    2014-09-01

    Accidental falls are the leading cause of injury-related death and hospitalization in old age, with over one-third of the older adults experiencing at least one fall or more each year. Because of limited healthcare resources, regular objective fall risk assessments are not possible in the community on a large scale. New methods for fall prediction are necessary to identify and monitor those older people at high risk of falling who would benefit from participating in falls prevention programmes. Technological advances have enabled less expensive ways to quantify physical fall risk in clinical practice and in the homes of older people. Recently, several studies have demonstrated that sensor-based fall risk assessments of postural sway, functional mobility, stepping and walking can discriminate between fallers and nonfallers. Recent research has used low-cost, portable and objective measuring instruments to assess fall risk in older people. Future use of these technologies holds promise for assessing fall risk accurately in an unobtrusive manner in clinical and daily life settings.

  11. Migraine Headache and Ischemic Stroke Risk: An Updated Meta-analysis

    Science.gov (United States)

    Spector, June T.; Kahn, Susan R.; Jones, Miranda R.; Jayakumar, Monisha; Dalal, Deepan; Nazarian, Saman

    2010-01-01

    Background Observational studies, including recent large cohort studies which were unavailable for prior meta-analysis, have suggested an association between migraine headache and ischemic stroke. We performed an updated meta-analysis to quantitatively summarize the strength of association between migraine and ischemic stroke risk. Methods We systematically searched electronic databases, including MEDLINE and EMBASE, through February 2009 for studies of human subjects in the English language. Study selection using a priori selection criteria, data extraction, and assessment of study quality were conducted independently by reviewer pairs using standardized forms. Results Twenty-one (60%) of 35 studies met the selection criteria, for a total of 622,381 participants (13 case-control, 8 cohort studies) included in the meta-analysis. The pooled adjusted odds ratio of ischemic stroke comparing migraineurs to non-migraineurs using a random effects model was 2.30 (95% confidence interval [CI], 1.91-2.76). The pooled adjusted effect estimates for studies that reported relative risks and hazard ratios, respectively, were 2.41 (95% CI, 1.81-3.20) and 1.52 (95% CI, 0.99-2.35). The overall pooled effect estimate was 2.04 (95% CI, 1.72-2.43). Results were robust to sensitivity analyses excluding lower quality studies. Conclusions Migraine is associated with increased ischemic stroke risk. These findings underscore the importance of identifying high-risk migraineurs with other modifiable stroke risk factors. Future studies of the effect of migraine treatment and modifiable risk factor reduction on stroke risk in migraineurs are warranted. PMID:20493462

  12. A modified risk evaluation method of slope failure in a heavy rain. For application to slopes in widespread area

    International Nuclear Information System (INIS)

    Suenaga, Hiroshi; Tanaka, Shiro; Kobayakawa, Hiroaki

    2015-01-01

    A risk evaluation method of slope failure has developed to combine gas-liquid two phase flow analysis as a rainfall infiltration analysis and elastic-plastic finite element analysis as a slope stability analysis and has applied to a slope field. This method, however, had a difficulty to apply to many slopes since it needed many parameters to calculate the risk of the slope failure. The method was simplified to lessen input parameters which included an inclination and length of a slope, a depth of bedrock and a rainfall pattern assuming that hydraulic properties and mechanical properties were similar for the same geological unit. The method was also modified to represent a water collection structure, a surface runoff, an existence of a forest road and a water level variation of a downward river / pond which could affect infiltration phenomena. Results of the simplification and the modification made it possible to enhance a prediction precision of the method and create a hazard map of slopes in widespread area. (author)

  13. 38 CFR 75.115 - Risk analysis.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Risk analysis. 75.115 Section 75.115 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) INFORMATION SECURITY MATTERS Data Breaches § 75.115 Risk analysis. If a data breach involving sensitive personal information that is processed or...

  14. Improved Methods for Fire Risk Assessment in Low-Income and Informal Settlements

    Directory of Open Access Journals (Sweden)

    John Twigg

    2017-02-01

    Full Text Available Fires cause over 300,000 deaths annually worldwide and leave millions more with permanent injuries: some 95% of these deaths are in low- and middle-income countries. Burn injury risk is strongly associated with low-income and informal (or slum settlements, which are growing rapidly in an urbanising world. Fire policy and mitigation strategies in poorer countries are constrained by inadequate data on incidence, impacts, and causes, which is mainly due to a lack of capacity and resources for data collection, analysis, and modelling. As a first step towards overcoming such challenges, this project reviewed the literature on the subject to assess the potential of a range of methods and tools for identifying, assessing, and addressing fire risk in low-income and informal settlements; the process was supported by an expert workshop at University College London in May 2016. We suggest that community-based risk and vulnerability assessment methods, which are widely used in disaster risk reduction, could be adapted to urban fire risk assessment, and could be enhanced by advances in crowdsourcing and citizen science for geospatial data creation and collection. To assist urban planners, emergency managers, and community organisations who are working in resource-constrained settings to identify and assess relevant fire risk factors, we also suggest an improved analytical framework based on the Haddon Matrix.

  15. Improved Methods for Fire Risk Assessment in Low-Income and Informal Settlements.

    Science.gov (United States)

    Twigg, John; Christie, Nicola; Haworth, James; Osuteye, Emmanuel; Skarlatidou, Artemis

    2017-02-01

    Fires cause over 300,000 deaths annually worldwide and leave millions more with permanent injuries: some 95% of these deaths are in low- and middle-income countries. Burn injury risk is strongly associated with low-income and informal (or slum) settlements, which are growing rapidly in an urbanising world. Fire policy and mitigation strategies in poorer countries are constrained by inadequate data on incidence, impacts, and causes, which is mainly due to a lack of capacity and resources for data collection, analysis, and modelling. As a first step towards overcoming such challenges, this project reviewed the literature on the subject to assess the potential of a range of methods and tools for identifying, assessing, and addressing fire risk in low-income and informal settlements; the process was supported by an expert workshop at University College London in May 2016. We suggest that community-based risk and vulnerability assessment methods, which are widely used in disaster risk reduction, could be adapted to urban fire risk assessment, and could be enhanced by advances in crowdsourcing and citizen science for geospatial data creation and collection. To assist urban planners, emergency managers, and community organisations who are working in resource-constrained settings to identify and assess relevant fire risk factors, we also suggest an improved analytical framework based on the Haddon Matrix.

  16. Segmented Poincaré plot analysis for risk stratification in patients with dilated cardiomyopathy.

    Science.gov (United States)

    Voss, A; Fischer, C; Schroeder, R; Figulla, H R; Goernig, M

    2010-01-01

    The prognostic value of heart rate variability in patients with dilated cardiomyopathy (DCM) is limited and does not contribute to risk stratification although the dynamics of ventricular repolarization differs considerably between DCM patients and healthy subjects. Neither linear nor nonlinear methods of heart rate variability analysis could discriminate between patients at high and low risk for sudden cardiac death. The aim of this study was to analyze the suitability of the new developed segmented Poincaré plot analysis (SPPA) to enhance risk stratification in DCM. In contrast to the usual applied Poincaré plot analysis the SPPA retains nonlinear features from investigated beat-to-beat interval time series. Main features of SPPA are the rotation of cloud of points and their succeeded variability depended segmentation. Significant row and column probabilities were calculated from the segments and led to discrimination (up to pplot analysis of heart rate variability was able to contribute to risk stratification in patients suffering from DCM.

  17. Common approach of risks analysis

    International Nuclear Information System (INIS)

    Noviello, L.; Naviglio, A.

    1996-01-01

    Although, following the resolutions of the High German Court, the protection level of the human beings is an objective which can change in time, it is obvious that it is an important point when there is a risk for the population. This is true more particularly for the industrial plants whose possible accidents could affect the population. The accidents risk analysis indicates that there is no conceptual difference between the risks of a nuclear power plant and those of the other industrial plants as chemical plants, the gas distribution system and the hydraulic dams. A legislation analysis induced by the Seveso Directive for the industrial risks give some important indications which should always be followed. This work analyses more particularly the legislative situation in different European countries and identifies some of the most important characteristics. Indeed, for most of the countries, the situation is different and it is a later difficulties source for nuclear power plants. In order to strengthen this reasoning, this paper presents some preliminary results of an analysis of a nuclear power plant following the approach of other industrial plants. In conclusion, it will be necessary to analyse again the risks assessment approach for nuclear power plants because the real protection level of human beings in a country is determined by the less regulated of the dangerous industrial plants existing at the surroundings. (O.M.)

  18. Risk and dose assessment methods in gamma knife QA

    International Nuclear Information System (INIS)

    Banks, W.W.; Jones, E.D.; Rathbun, P.

    1992-10-01

    Traditional methods used in assessing risk in nuclear power plants may be inappropriate to use in assessing medical radiation risks. The typical philosophy used in assessing nuclear reactor risks is machine dominated with only secondary attention paid to the human component, and only after critical machine failure events have been identified. In assessing the risk of a misadministrative radiation dose to patients, the primary source of failures seems to stem overwhelmingly, from the actions of people and only secondarily from machine mode failures. In essence, certain medical misadministrations are dominated by human events not machine failures. Radiological medical devices such as the Leksell Gamma Knife are very simple in design, have few moving parts, and are relatively free from the risks of wear when compared with a nuclear power plant. Since there are major technical differences between a gamma knife and a nuclear power plant, one must select a particular risk assessment method which is sensitive to these system differences and tailored to the unique medical aspects of the phenomena under study. These differences also generate major shifts in the philosophy and assumptions which drive the risk assessment (Machine-centered vs Person-centered) method. We were prompted by these basic differences to develop a person-centered approach to risk assessment which would reflect these basic philosophical and technological differences, have the necessary resolution in its metrics, and be highly reliable (repeatable). The risk approach chosen by the Livermore investigative team has been called the ''Relative Risk Profile Method'' and has been described in detail by Banks and Paramore, (1983)

  19. Risk analysis for autonomous underwater vehicle operations in extreme environments.

    Science.gov (United States)

    Brito, Mario Paulo; Griffiths, Gwyn; Challenor, Peter

    2010-12-01

    Autonomous underwater vehicles (AUVs) are used increasingly to explore hazardous marine environments. Risk assessment for such complex systems is based on subjective judgment and expert knowledge as much as on hard statistics. Here, we describe the use of a risk management process tailored to AUV operations, the implementation of which requires the elicitation of expert judgment. We conducted a formal judgment elicitation process where eight world experts in AUV design and operation were asked to assign a probability of AUV loss given the emergence of each fault or incident from the vehicle's life history of 63 faults and incidents. After discussing methods of aggregation and analysis, we show how the aggregated risk estimates obtained from the expert judgments were used to create a risk model. To estimate AUV survival with mission distance, we adopted a statistical survival function based on the nonparametric Kaplan-Meier estimator. We present theoretical formulations for the estimator, its variance, and confidence limits. We also present a numerical example where the approach is applied to estimate the probability that the Autosub3 AUV would survive a set of missions under Pine Island Glacier, Antarctica in January-March 2009. © 2010 Society for Risk Analysis.

  20. PROOF OF CONCEPT FOR A HUMAN RELIABILITY ANALYSIS METHOD FOR HEURISTIC USABILITY EVALUATION OF SOFTWARE

    International Nuclear Information System (INIS)

    Ronald L. Boring; David I. Gertman; Jeffrey C. Joe; Julie L. Marble

    2005-01-01

    An ongoing issue within human-computer interaction (HCI) is the need for simplified or ''discount'' methods. The current economic slowdown has necessitated innovative methods that are results driven and cost effective. The myriad methods of design and usability are currently being cost-justified, and new techniques are actively being explored that meet current budgets and needs. Recent efforts in human reliability analysis (HRA) are highlighted by the ten-year development of the Standardized Plant Analysis Risk HRA (SPAR-H) method. The SPAR-H method has been used primarily for determining human centered risk at nuclear power plants. The SPAR-H method, however, shares task analysis underpinnings with HCI. Despite this methodological overlap, there is currently no HRA approach deployed in heuristic usability evaluation. This paper presents an extension of the existing SPAR-H method to be used as part of heuristic usability evaluation in HCI

  1. Introduction of the risk analysis

    International Nuclear Information System (INIS)

    Campon, G.; Martinez, I.

    2013-01-01

    An introduction of risks analysis was given in the exposition which main issues were: food innocuousness, world, regional and national food context,change of paradigms, health definition, risk, codex, standardization, food chain role, trade agreement, codex alimentarius, food transmission diseases cost impact

  2. On the use of judgement in probabilistic risk analysis

    Energy Technology Data Exchange (ETDEWEB)

    Apostolakis, G

    1986-05-01

    The extensive use of judgement in risk studies creates several issues related to the perception of probabilities and the value of formal theories for uncertainty analysis. The direct assessment of probability distributions may lead to biased curves that do not represent the state of knowledge of the assessors. The use of formal methods and the calibration of the analysts help alleviate some of these biases. Case studies involving the assessment of probability distributions for human error rates and for failure rates of components exemplify the importance of the careful use of expert opinions in risk studies.

  3. Risk Analysis Group annual progress report 1984

    International Nuclear Information System (INIS)

    1985-06-01

    The activities of the Risk Analysis Group at Risoe during 1984 are presented. These include descriptions in some detail of work on general development topics and risk analysis performed as contractor. (author)

  4. Risk-benefit analysis of 18FDG PET cancer screening

    International Nuclear Information System (INIS)

    Murano, Takeshi; Daisaki, Hiromitsu; Terauchi, Takashi; Iinuma, Takeshi; Tateno, Yukio; Tateishi, Ukihide; Kato, Kazuaki; Inoue, Tomio

    2008-01-01

    The benefits of 18 F-fluorodeoxyglucose ( 18 FDG) positron emission tomography (PET) cancer screening are expected to include a large population of examinees and are intended for a healthy group. Therefore, we attempted to determine the benefit/risk ratio, estimated risk of radiation exposure, and benefit of cancer detection. We used software that embodied the method of the International Commission on Radiological Protection (ICRP) to calculate the average duration of life of radiation exposure. We calculated the lifesaving person years of benefit to be obtained by 18 FDG PET cancer screening detection. We also calculated the benefit/risk ratio using life-shortening and lifesaving person years. According to age, the benefit/risk ratio was more than 1 at 35-39 years old for males and 30-34 years old for females. 18 FDG PET cancer screening also is effective for examinees older than this. A risk-benefit analysis of 18 FDG-PET/computed tomography (CT) cancer screening will be necessary in the future. (author)

  5. Failure Mode and Effect Analysis using Soft Set Theory and COPRAS Method

    Directory of Open Access Journals (Sweden)

    Ze-Ling Wang

    2017-01-01

    Full Text Available Failure mode and effect analysis (FMEA is a risk management technique frequently applied to enhance the system performance and safety. In recent years, many researchers have shown an intense interest in improving FMEA due to inherent weaknesses associated with the classical risk priority number (RPN method. In this study, we develop a new risk ranking model for FMEA based on soft set theory and COPRAS method, which can deal with the limitations and enhance the performance of the conventional FMEA. First, trapezoidal fuzzy soft set is adopted to manage FMEA team membersr linguistic assessments on failure modes. Then, a modified COPRAS method is utilized for determining the ranking order of the failure modes recognized in FMEA. Especially, we treat the risk factors as interdependent and employ the Choquet integral to obtain the aggregate risk of failures in the new FMEA approach. Finally, a practical FMEA problem is analyzed via the proposed approach to demonstrate its applicability and effectiveness. The result shows that the FMEA model developed in this study outperforms the traditional RPN method and provides a more reasonable risk assessment of failure modes.

  6. A classification scheme for risk assessment methods.

    Energy Technology Data Exchange (ETDEWEB)

    Stamp, Jason Edwin; Campbell, Philip LaRoche

    2004-08-01

    This report presents a classification scheme for risk assessment methods. This scheme, like all classification schemes, provides meaning by imposing a structure that identifies relationships. Our scheme is based on two orthogonal aspects--level of detail, and approach. The resulting structure is shown in Table 1 and is explained in the body of the report. Each cell in the Table represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. This report imposes structure on the set of risk assessment methods in order to reveal their relationships and thus optimize their usage.We present a two-dimensional structure in the form of a matrix, using three abstraction levels for the rows and three approaches for the columns. For each of the nine cells in the matrix we identify the method type by name and example. The matrix helps the user understand: (1) what to expect from a given method, (2) how it relates to other methods, and (3) how best to use it. Each cell in the matrix represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. The matrix, with type names in the cells, is introduced in Table 2 on page 13 below. Unless otherwise stated we use the word 'method' in this report to refer to a 'risk assessment method', though often times we use the full phrase. The use of the terms 'risk assessment' and 'risk management' are close enough that we do not attempt to distinguish them in this report. The remainder of this report is organized as follows. In

  7. A ubiquitous method for street scale spatial data collection and analysis in challenging urban environments: mapping health risks using spatial video in Haiti.

    Science.gov (United States)

    Curtis, Andrew; Blackburn, Jason K; Widmer, Jocelyn M; Morris, J Glenn

    2013-04-15

    Fine-scale and longitudinal geospatial analysis of health risks in challenging urban areas is often limited by the lack of other spatial layers even if case data are available. Underlying population counts, residential context, and associated causative factors such as standing water or trash locations are often missing unless collected through logistically difficult, and often expensive, surveys. The lack of spatial context also hinders the interpretation of results and designing intervention strategies structured around analytical insights. This paper offers a ubiquitous spatial data collection approach using a spatial video that can be used to improve analysis and involve participatory collaborations. A case study will be used to illustrate this approach with three health risks mapped at the street scale for a coastal community in Haiti. Spatial video was used to collect street and building scale information, including standing water, trash accumulation, presence of dogs, cohort specific population characteristics, and other cultural phenomena. These data were digitized into Google Earth and then coded and analyzed in a GIS using kernel density and spatial filtering approaches. The concentrations of these risks around area schools which are sometimes sources of diarrheal disease infection because of the high concentration of children and variable sanitary practices will show the utility of the method. In addition schools offer potential locations for cholera education interventions. Previously unavailable fine scale health risk data vary in concentration across the town, with some schools being proximate to greater concentrations of the mapped risks. The spatial video is also used to validate coded data and location specific risks within these "hotspots". Spatial video is a tool that can be used in any environment to improve local area health analysis and intervention. The process is rapid and can be repeated in study sites through time to track spatio

  8. A structured elicitation method to identify key direct risk factors for the management of natural resources

    Directory of Open Access Journals (Sweden)

    Michael Smith

    2015-11-01

    Full Text Available The high level of uncertainty inherent in natural resource management requires planners to apply comprehensive risk analyses, often in situations where there are few resources. In this paper, we demonstrate a broadly applicable, novel and structured elicitation approach to identify important direct risk factors. This new approach combines expert calibration and fuzzy based mathematics to capture and aggregate subjective expert estimates of the likelihood that a set of direct risk factors will cause management failure. A specific case study is used to demonstrate the approach; however, the described methods are widely applicable in risk analysis. For the case study, the management target was to retain all species that characterise a set of natural biological elements. The analysis was bounded by the spatial distribution of the biological elements under consideration and a 20-year time frame. Fourteen biological elements were expected to be at risk. Eleven important direct risk factors were identified that related to surrounding land use practices, climate change, problem species (e.g., feral predators, fire and hydrological change. In terms of their overall influence, the two most important risk factors were salinisation and a lack of water which together pose a considerable threat to the survival of nine biological elements. The described approach successfully overcame two concerns arising from previous risk analysis work: (1 the lack of an intuitive, yet comprehensive scoring method enabling the detection and clarification of expert agreement and associated levels of uncertainty; and (2 the ease with which results can be interpreted and communicated while preserving a rich level of detail essential for informed decision making.

  9. New method for assessing risks of email

    Science.gov (United States)

    Raja, Seyyed H.; Afrooz, Farzad

    2013-03-01

    E-mail technology, has become one of the requirements of human lives for correspondence between individuals. Given this, the important point is that the messages, server and client of e-mail and correspondences that exchanged between different people have acceptable security, to make people sure to use of this technology. In the information age, many of financial and non financial transactions are done electronically, data exchange takes place via the internet and theft and manipulation of data can make exorbitant cost in terms of integrity, financial, political, economic and culture. E-mail correspondence in there is same and it is very important. With review took place, a method that will focus on email system for risks assessment is not provided. We are examining ways of assessing for other systems and their strengths and weaknesses, then we use Mr Convery method for assessing email risks which it is for assessing network risks. At the end of paper we have offered special table for email risk assessment.

  10. Statistically based uncertainty assessments in nuclear risk analysis

    International Nuclear Information System (INIS)

    Spencer, F.W.; Diegert, K.V.; Easterling, R.G.

    1987-01-01

    Over the last decade, the problems of estimation and uncertainty assessment in probabilistics risk assessment (PRAs) have been addressed in a variety of NRC and industry-sponsored projects. These problems have received attention because of a recognition that major uncertainties in risk estimation exist, which can be reduced by collecting more and better data and other information, and because of a recognition that better methods for assessing these uncertainties are needed. In particular, a clear understanding of the nature and magnitude of various sources of uncertainty is needed to facilitate descision-making on possible plant changes and research options. Recent PRAs have employed methods of probability propagation, sometimes involving the use of Bayes Theorem, and intended to formalize the use of ''engineering judgment'' or ''expert opinion.'' All sources, or feelings, of uncertainty are expressed probabilistically, so that uncertainty analysis becomes simply a matter of probability propagation. Alternatives to forcing a probabilistic framework at all stages of a PRA are a major concern in this paper, however

  11. An Updated Meta-Analysis of Risk of Multiple Sclerosis following Infectious Mononucleosis

    Science.gov (United States)

    Handel, Adam E.; Williamson, Alexander J.; Disanto, Giulio; Handunnetthi, Lahiru; Giovannoni, Gavin; Ramagopalan, Sreeram V.

    2010-01-01

    Background Multiple sclerosis (MS) appears to develop in genetically susceptible individuals as a result of environmental exposures. Epstein-Barr virus (EBV) infection is an almost universal finding among individuals with MS. Symptomatic EBV infection as manifested by infectious mononucleosis (IM) has been shown in a previous meta-analysis to be associated with the risk of MS, however a number of much larger studies have since been published. Methods/Principal Findings We performed a Medline search to identify articles published since the original meta-analysis investigating MS risk following IM. A total of 18 articles were included in this study, including 19390 MS patients and 16007 controls. We calculated the relative risk of MS following IM using a generic inverse variance with random effects model. This showed that the risk of MS was strongly associated with IM (relative risk (RR) 2.17; 95% confidence interval 1.97–2.39; pmononucleosis significantly increases the risk of multiple sclerosis. Future work should focus on the mechanism of this association and interaction with other risk factors. PMID:20824132

  12. Risk-based decision analysis for groundwater operable units

    International Nuclear Information System (INIS)

    Chiaramonte, G.R.

    1995-01-01

    This document proposes a streamlined approach and methodology for performing risk assessment in support of interim remedial measure (IRM) decisions involving the remediation of contaminated groundwater on the Hanford Site. This methodology, referred to as ''risk-based decision analysis,'' also supports the specification of target cleanup volumes and provides a basis for design and operation of the groundwater remedies. The risk-based decision analysis can be completed within a short time frame and concisely documented. The risk-based decision analysis is more versatile than the qualitative risk assessment (QRA), because it not only supports the need for IRMs, but also provides criteria for defining the success of the IRMs and provides the risk-basis for decisions on final remedies. For these reasons, it is proposed that, for groundwater operable units, the risk-based decision analysis should replace the more elaborate, costly, and time-consuming QRA

  13. Prioritizing the risk of plant pests by clustering methods; self-organising maps, k-means and hierarchical clustering

    Directory of Open Access Journals (Sweden)

    Susan Worner

    2013-09-01

    Full Text Available For greater preparedness, pest risk assessors are required to prioritise long lists of pest species with potential to establish and cause significant impact in an endangered area. Such prioritization is often qualitative, subjective, and sometimes biased, relying mostly on expert and stakeholder consultation. In recent years, cluster based analyses have been used to investigate regional pest species assemblages or pest profiles to indicate the risk of new organism establishment. Such an approach is based on the premise that the co-occurrence of well-known global invasive pest species in a region is not random, and that the pest species profile or assemblage integrates complex functional relationships that are difficult to tease apart. In other words, the assemblage can help identify and prioritise species that pose a threat in a target region. A computational intelligence method called a Kohonen self-organizing map (SOM, a type of artificial neural network, was the first clustering method applied to analyse assemblages of invasive pests. The SOM is a well known dimension reduction and visualization method especially useful for high dimensional data that more conventional clustering methods may not analyse suitably. Like all clustering algorithms, the SOM can give details of clusters that identify regions with similar pest assemblages, possible donor and recipient regions. More important, however SOM connection weights that result from the analysis can be used to rank the strength of association of each species within each regional assemblage. Species with high weights that are not already established in the target region are identified as high risk. However, the SOM analysis is only the first step in a process to assess risk to be used alongside or incorporated within other measures. Here we illustrate the application of SOM analyses in a range of contexts in invasive species risk assessment, and discuss other clustering methods such as k

  14. PRA and Risk Informed Analysis

    International Nuclear Information System (INIS)

    Bernsen, Sidney A.; Simonen, Fredric A.; Balkey, Kenneth R.

    2006-01-01

    The Boiler and Pressure Vessel Code (BPVC) of the American Society of Mechanical Engineers (ASME) has introduced a risk based approach into Section XI that covers Rules for Inservice Inspection of Nuclear Power Plant Components. The risk based approach requires application of the probabilistic risk assessments (PRA). Because no industry consensus standard existed for PRAs, ASME has developed a standard to evaluate the quality level of an available PRA needed to support a given risk based application. The paper describes the PRA standard, Section XI application of PRAs, and plans for broader applications of PRAs to other ASME nuclear codes and standards. The paper addresses several specific topics of interest to Section XI. Important consideration are special methods (surrogate components) used to overcome the lack of PRA treatments of passive components in PRAs. The approach allows calculations of conditional core damage probabilities both for component failures that cause initiating events and failures in standby systems that decrease the availability of these systems. The paper relates the explicit risk based methods of the new Section XI code cases to the implicit consideration of risk used in the development of Section XI. Other topics include the needed interactions of ISI engineers, plant operating staff, PRA specialists, and members of expert panels that review the risk based programs

  15. Uncertainty Analysis on the Health Risk Caused by a Radiological Terror

    International Nuclear Information System (INIS)

    Jeong, Hyojoon; Hwang, Wontae; Kim, Eunhan; Han, Moonhee

    2010-01-01

    Atmospheric dispersion modeling and uncertainty analysis were carried out support the decision making in case of radiological emergency events. The risk caused by inhalation is highly dependent on air concentrations for radionuclides, therefore air monitoring and dispersion modeling have to be performed carefully to reduce the uncertainty of the health risk assessment for the public. When an intentional release of radioactive materials occurs in an urban area, air quality for radioactive materials in the environment is of great importance to take action for countermeasures and environmental risk assessments. Atmospheric modeling is part of the decision making tasks and that it is particularly important for emergency managers as they often need to take actions quickly on very inadequate information. In this study, we assume an 137 Cs explosion of 50 TBq using RDDs in the metropolitan area of Soul, South Korea. California Puff Model is used to calculate an atmospheric dispersion and transport for 137 Cs, and environmental risk analysis is performed using the Monte Carlo method

  16. Survey of probabilistic methods in safety and risk assessment for nuclear power plant licensing

    International Nuclear Information System (INIS)

    1984-04-01

    After an overview about the goals and general methods of probabilistic approaches in nuclear safety the main features of probabilistic safety or risk assessment (PRA) methods are discussed. Mostly in practical applications not a full-fledged PRA is applied but rather various levels of analysis leading from unavailability assessment of systems over the more complex analysis of the probable core damage stages up to the assessment of the overall health effects on the total population from a certain practice. The various types of application are discussed in relation to their limitation and benefits for different stages of design or operation of nuclear power plants. This gives guidance for licensing staff to judge the usefulness of the various methods for their licensing decisions. Examples of the application of probabilistic methods in several countries are given. Two appendices on reliability analysis and on containment and consequence analysis provide some more details on these subjects. (author)

  17. Gis-Based Multi-Criteria Decision Analysis for Forest Fire Risk Mapping

    Science.gov (United States)

    Akay, A. E.; Erdoğan, A.

    2017-11-01

    The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage), topographic features (slope and aspect), and climatic parameters (temperature, wind). In this study, GIS-based Multi-Criteria Decision Analysis (MCDA) method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP) method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

  18. Obesity as a risk factor for developing functional limitation among older adults: A conditional inference tree analysis

    Science.gov (United States)

    Objective: To examine the risk factors of developing functional decline and make probabilistic predictions by using a tree-based method that allows higher order polynomials and interactions of the risk factors. Methods: The conditional inference tree analysis, a data mining approach, was used to con...

  19. Engineering risks

    International Nuclear Information System (INIS)

    Hauptmanns, U.; Werner, W.

    1991-01-01

    The book describes the methods of risk analysis and explains the procedures and results of a number of studies including the German Risk Study, Phase B and NUREG-1150. After defining basic concepts the methods of risk analysis are treated. In the field of nuclear energy studies for light water, fast breeder and high temperature reactors and for the nuclear fuel cycle are discussed; their relevant results are presented. Additionally, precursors to severe accidents are dealt with. Risk studies for process plants are described; their objectives and methods of analysis are examined. Furthermore, their approaches are compared with that of the German Risk Study, Phase A. Risk comparisons for nuclear, conventional and renewable energy sources are critically examined. Technical and legal aspects of the safety evaluation for nuclear power plants in the FRG and the potential of the combined use of the deterministic and probabilistic approaches are discussed. The book concludes with an overview of probabilistic safety goals in different countries. (orig.) With 52 figs

  20. Dietary Fat Intake and Risk of Gastric Cancer: A Meta-Analysis of Observational Studies

    Science.gov (United States)

    Liu, Xiao; Meng, Qingyang; Xi, Qiulei; Zhuang, Qiulin; Han, Yusong; Gao, Ying; Ding, Qiurong; Wu, Guohao

    2015-01-01

    Background and Objectives Consumption of dietary fat has been reported to be associated with gastric cancer risk, but the results of epidemiologic studies remain inconsistent. We conducted a meta-analysis to summarize the evidence regarding the association between dietary fat intake and gastric cancer risk. Methods A comprehensive search of PubMed and EMBASE was performed to identify observational studies providing quantitative estimates between dietary fat and gastric cancer risk. Random effects model was used to calculate the summary relative risk(SRR) in the highest versus lowest analysis. Categorical dose-response analysis was conducted to quantify the association between dietary fat intake and gastric cancer risk. Heterogeneity among studies was evaluated using I2 and tau2(between study variance)statistics. Subgroup analysis and publication bias analysis were also performed. Results Twenty-two articles were included in the meta-analysis. The SRR for gastric cancer was 1.18 for individuals with highest intake versus lowest intake of total fat (95% confidence interval [CI]: 0.999–1.39; n = 28; Pgastric cancer risk were observed. Conclusions Our results suggest that intake of total fat is potentially positively associated with gastric cancer risk, and specific subtypes of fats account for different effects. However, these findings should be confirmed by further well-designed cohort studieswith detailed dietary assessments and strict control of confounders. PMID:26402223

  1. DEPEND-HRA-A method for consideration of dependency in human reliability analysis

    International Nuclear Information System (INIS)

    Cepin, Marko

    2008-01-01

    A consideration of dependencies between human actions is an important issue within the human reliability analysis. A method was developed, which integrates the features of existing methods and the experience from a full scope plant simulator. The method is used on real plant-specific human reliability analysis as a part of the probabilistic safety assessment of a nuclear power plant. The method distinguishes dependency for pre-initiator events from dependency for initiator and post-initiator events. The method identifies dependencies based on scenarios, where consecutive human actions are modeled, and based on a list of minimal cut sets, which is obtained by running the minimal cut set analysis considering high values of human error probabilities in the evaluation. A large example study, which consisted of a large number of human failure events, demonstrated the applicability of the method. Comparative analyses that were performed show that both selection of dependency method and selection of dependency levels within the method largely impact the results of probabilistic safety assessment. If the core damage frequency is not impacted much, the listings of important basic events in terms of risk increase and risk decrease factors may change considerably. More efforts are needed on the subject, which will prepare the background for more detailed guidelines, which will remove the subjectivity from the evaluations as much as it is possible

  2. Use of a risk assessment method to improve the safety of negative pressure wound therapy.

    Science.gov (United States)

    Lelong, Anne-Sophie; Martelli, Nicolas; Bonan, Brigitte; Prognon, Patrice; Pineau, Judith

    2014-06-01

    To conduct a risk analysis of the negative pressure wound therapy (NPWT) care process and to improve the safety of NPWT, a working group of nurses, hospital pharmacists, physicians and hospital managers performed a risk analysis for the process of NPWT care. The failure modes, effects and criticality analysis (FMECA) method was used for this analysis. Failure modes and their consequences were defined and classified as a function of their criticality to identify priority actions for improvement. By contrast to classical FMECA, the criticality index (CI) of each consequence was calculated by multiplying occurrence, severity and detection scores. We identified 13 failure modes, leading to 20 different consequences. The CI of consequences was initially 712, falling to 357 after corrective measures were implemented. The major improvements proposed included the establishment of 6-monthly training cycles for nurses, physicians and surgeons and the introduction of computerised prescription for NPWT. The FMECA method also made it possible to prioritise actions as a function of the criticality ranking of consequences and was easily understood and used by the working group. This study is, to our knowledge, the first to use the FMECA method to improve the safety of NPWT. © 2012 The Authors. International Wound Journal © 2012 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  3. On the benefits of multi-attribute risk analysis in nuclear emergency management

    International Nuclear Information System (INIS)

    Haemaelaeinen, R.P.; Lindstedt, M.

    1999-01-01

    The radiation protection authorities have seen a need to apply multi-attribute risk analysis in the nuclear emergency management and planning processes to deal with the conflicting objectives, different parties involved and uncertainties. This type of an approach is expected to help in at least the following three areas; to ensure that all the relevant attributes are considered in the decision making, to enhance communication between concerned parties including the population, and to provide a method for including risk analysis explicitly in the process. A MAUT analysis was used to select a strategy for protecting the population after a simulated nuclear accident. A value-focused approach and the use of a neutral facilitator were seen as very useful

  4. Risk-oriented analysis on the German prototype fast breeder reactor SNR-300

    International Nuclear Information System (INIS)

    Bayer, A.; Koeberlein, K.; Gesellschaft fuer Reaktorsicherheit, Garching, Germany)

    1984-01-01

    On request of a fact-finding committee of the German Federal Parliament, a risk-oriented analysis on the SNR-300, the German prototype fast breeder reactor, has been performed to allow a pragmatic safety comparison of the SNR-300 and a modern light-water reactor. Results of the technical plant analysis have been summarized in seven release categories. Accident consequences have been calculated for the actual site at Kalkar/Rhine. The results indicate that for the SNR-300 both the frequency of major accidents and the consequences of accidents are smaller than for the pressurized-water reactor analyzed in the German Risk Study. This article summarizes the methods and main results of the analysis of the SNR-300

  5. On the benefits of multi-attribute risk analysis in nuclear emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Haemaelaeinen, R.P.; Lindstedt, M. [Helsinki Univ. of Technology (Finland). Systems Analysis Lab.; Sinkko, K. [The Radiation and Nuclear Safety Authority, Helsinki (Finland)

    1999-12-01

    The radiation protection authorities have seen a need to apply multi-attribute risk analysis in the nuclear emergency management and planning processes to deal with the conflicting objectives, different parties involved and uncertainties. This type of an approach is expected to help in at least the following three areas; to ensure that all the relevant attributes are considered in the decision making, to enhance communication between concerned parties including the population, and to provide a method for including risk analysis explicitly in the process. A MAUT analysis was used to select a strategy for protecting the population after a simulated nuclear accident. A value-focused approach and the use of a neutral facilitator were seen as very useful.

  6. Risk Assessment of Defect Occurrences in Engine Piston Castings by FMEA Method

    Directory of Open Access Journals (Sweden)

    Piątkowski J.

    2017-09-01

    Full Text Available The FMEA (Failure Mode and Effects Analysis method consists in analysis of failure modes and evaluation of their effects based on determination of cause-effect relationships for formation of possible product or process defects. Identified irregularities which occur during the production process of piston castings for internal combustion engines were ordered according to their failure rates, and using Pareto-Lorenz analysis, their per cent and cumulated shares were determined. The assessments of risk of defects occurrence and their causes were carried out in ten-point scale of integers, while taking three following criteria into account: significance of effects of the defect occurrence (LPZ, defect occurrence probability (LPW and detectability of the defect found (LPO. A product of these quantities constituted the risk score index connected with a failure occurrence (a so-called “priority number,” LPR. Based on the observations of the piston casting process and on the knowledge of production supervisors, a set of corrective actions was developed and the FMEA was carried out again. It was shown that the proposed improvements reduce the risk of occurrence of process failures significantly, translating into a decrease in defects and irregularities during the production of piston castings for internal combustion engines.

  7. Metal speciation: survey of environmental methods of analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mach, M.H.; Nott, B.; Scott, J.W.; Maddalone, R.F.; Whiddon, N.T. [TRW, Redondo Beach, CA (United States). Chemistry Technology Dept.

    1996-07-01

    As part of a recent task under the EPRI Analytical Methods Qualification Program (RP 1851), TRW has surveyed the methods available for monitoring metal species in typical utility aqueous discharge streams. Methods for determining the individual species of these metals can become important in a regulatory sense as the EPA transitions to assessment of environmental risk based on bioavailability. For example, EPA considers methyl mercury and Cr(VI) much more toxic to the aquatic environment than inorganic mercury or Cr(III). The species of a given element can also differ in their transport and bioaccumulation. Methods for speciation generally include a selective separation step followed by standard metals analysis. Speciation, therefore, is mainly derived from the separation step and not from the method of final quantisation. Examples of separation/analysis include: selective extraction followed by graphite furnace atomic absorption or ICP-MS; separation by GC followed by metals detection; chelation and/or direct separation by LC followed by UV measurement or metals detection; and ion chromatography with conductivity, UV, or metals detection. There are a number of sampling issues associated with metal species such as stabilization (maintaining oxidation state), absorption, and filtration that need to be addressed in order to obtain and maintain a representative sample for analysis. 45 refs., 1 tab.

  8. A stable systemic risk ranking in China's banking sector: Based on principal component analysis

    Science.gov (United States)

    Fang, Libing; Xiao, Binqing; Yu, Honghai; You, Qixing

    2018-02-01

    In this paper, we compare five popular systemic risk rankings, and apply principal component analysis (PCA) model to provide a stable systemic risk ranking for the Chinese banking sector. Our empirical results indicate that five methods suggest vastly different systemic risk rankings for the same bank, while the combined systemic risk measure based on PCA provides a reliable ranking. Furthermore, according to factor loadings of the first component, PCA combined ranking is mainly based on fundamentals instead of market price data. We clearly find that price-based rankings are not as practical a method as fundamentals-based ones. This PCA combined ranking directly shows systemic risk contributions of each bank for banking supervision purpose and reminds banks to prevent and cope with the financial crisis in advance.

  9. Fuzzy Risk Analysis for a Production System Based on the Nagel Point of a Triangle

    Directory of Open Access Journals (Sweden)

    Handan Akyar

    2016-01-01

    Full Text Available Ordering and ranking fuzzy numbers and their comparisons play a significant role in decision-making problems such as social and economic systems, forecasting, optimization, and risk analysis problems. In this paper, a new method for ordering triangular fuzzy numbers using the Nagel point of a triangle is presented. With the aid of the proposed method, reasonable properties of ordering fuzzy numbers are verified. Certain comparative examples are given to illustrate the advantages of the new method. Many papers have been devoted to studies on fuzzy ranking methods, but some of these studies have certain shortcomings. The proposed method overcomes the drawbacks of the existing methods in the literature. The suggested method can order triangular fuzzy numbers as well as crisp numbers and fuzzy numbers with the same centroid point. An application to the fuzzy risk analysis problem is given, based on the suggested ordering approach.

  10. Uncertainties in Cancer Risk Coefficients for Environmental Exposure to Radionuclides. An Uncertainty Analysis for Risk Coefficients Reported in Federal Guidance Report No. 13

    Energy Technology Data Exchange (ETDEWEB)

    Pawel, David [U.S. Environmental Protection Agency; Leggett, Richard Wayne [ORNL; Eckerman, Keith F [ORNL; Nelson, Christopher [U.S. Environmental Protection Agency

    2007-01-01

    Federal Guidance Report No. 13 (FGR 13) provides risk coefficients for estimation of the risk of cancer due to low-level exposure to each of more than 800 radionuclides. Uncertainties in risk coefficients were quantified in FGR 13 for 33 cases (exposure to each of 11 radionuclides by each of three exposure pathways) on the basis of sensitivity analyses in which various combinations of plausible biokinetic, dosimetric, and radiation risk models were used to generate alternative risk coefficients. The present report updates the uncertainty analysis in FGR 13 for the cases of inhalation and ingestion of radionuclides and expands the analysis to all radionuclides addressed in that report. The analysis indicates that most risk coefficients for inhalation or ingestion of radionuclides are determined within a factor of 5 or less by current information. That is, application of alternate plausible biokinetic and dosimetric models and radiation risk models (based on the linear, no-threshold hypothesis with an adjustment for the dose and dose rate effectiveness factor) is unlikely to change these coefficients by more than a factor of 5. In this analysis the assessed uncertainty in the radiation risk model was found to be the main determinant of the uncertainty category for most risk coefficients, but conclusions concerning the relative contributions of risk and dose models to the total uncertainty in a risk coefficient may depend strongly on the method of assessing uncertainties in the risk model.

  11. Flood Risk Assessment Based On Security Deficit Analysis

    Science.gov (United States)

    Beck, J.; Metzger, R.; Hingray, B.; Musy, A.

    Risk is a human perception: a given risk may be considered as acceptable or unac- ceptable depending on the group that has to face that risk. Flood risk analysis of- ten estimates economic losses from damages, but neglects the question of accept- able/unacceptable risk. With input from land use managers, politicians and other stakeholders, risk assessment based on security deficit analysis determines objects with unacceptable risk and their degree of security deficit. Such a risk assessment methodology, initially developed by the Swiss federal authorities, is illustrated by its application on a reach of the Alzette River (Luxembourg) in the framework of the IRMA-SPONGE FRHYMAP project. Flood risk assessment always involves a flood hazard analysis, an exposed object vulnerability analysis, and an analysis combing the results of these two previous analyses. The flood hazard analysis was done with the quasi-2D hydraulic model FldPln to produce flood intensity maps. Flood intensity was determined by the water height and velocity. Object data for the vulnerability analysis, provided by the Luxembourg government, were classified according to their potential damage. Potential damage is expressed in terms of direct, human life and secondary losses. A thematic map was produced to show the object classification. Protection goals were then attributed to the object classes. Protection goals are assigned in terms of an acceptable flood intensity for a certain flood frequency. This is where input from land use managers and politicians comes into play. The perception of risk in the re- gion or country influences the protection goal assignment. Protection goals as used in Switzerland were used in this project. Thematic maps showing the protection goals of each object in the case study area for a given flood frequency were produced. Com- parison between an object's protection goal and the intensity of the flood that touched the object determine the acceptability of the risk and the

  12. Using Enterprise Architecture for Analysis of a Complex Adaptive Organization's Risk Inducing Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Salguero, Laura Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huff, Johnathon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Matta, Anthony R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Collins, Sue S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    Sandia National Laboratories is an organization with a wide range of research and development activities that include nuclear, explosives, and chemical hazards. In addition, Sandia has over 2000 labs and over 40 major test facilities, such as the Thermal Test Complex, the Lightning Test Facility, and the Rocket Sled Track. In order to support safe operations, Sandia has a diverse Environment, Safety, and Health (ES&H) organization that provides expertise to support engineers and scientists in performing work safely. With such a diverse organization to support, the ES&H program continuously seeks opportunities to improve the services provided for Sandia by using various methods as part of their risk management strategy. One of the methods being investigated is using enterprise architecture analysis to mitigate risk inducing characteristics such as normalization of deviance, organizational drift, and problems in information flow. This paper is a case study for how a Department of Defense Architecture Framework (DoDAF) model of the ES&H enterprise, including information technology applications, can be analyzed to understand the level of risk associated with the risk inducing characteristics discussed above. While the analysis is not complete, we provide proposed analysis methods that will be used for future research as the project progresses.

  13. Comparison of cluster-based and source-attribution methods for estimating transmission risk using large HIV sequence databases.

    Science.gov (United States)

    Le Vu, Stéphane; Ratmann, Oliver; Delpech, Valerie; Brown, Alison E; Gill, O Noel; Tostevin, Anna; Fraser, Christophe; Volz, Erik M

    2018-06-01

    Phylogenetic clustering of HIV sequences from a random sample of patients can reveal epidemiological transmission patterns, but interpretation is hampered by limited theoretical support and statistical properties of clustering analysis remain poorly understood. Alternatively, source attribution methods allow fitting of HIV transmission models and thereby quantify aspects of disease transmission. A simulation study was conducted to assess error rates of clustering methods for detecting transmission risk factors. We modeled HIV epidemics among men having sex with men and generated phylogenies comparable to those that can be obtained from HIV surveillance data in the UK. Clustering and source attribution approaches were applied to evaluate their ability to identify patient attributes as transmission risk factors. We find that commonly used methods show a misleading association between cluster size or odds of clustering and covariates that are correlated with time since infection, regardless of their influence on transmission. Clustering methods usually have higher error rates and lower sensitivity than source attribution method for identifying transmission risk factors. But neither methods provide robust estimates of transmission risk ratios. Source attribution method can alleviate drawbacks from phylogenetic clustering but formal population genetic modeling may be required to estimate quantitative transmission risk factors. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  14. Neural Network-Based Coronary Heart Disease Risk Prediction Using Feature Correlation Analysis

    Directory of Open Access Journals (Sweden)

    Jae Kwon Kim

    2017-01-01

    Full Text Available Background. Of the machine learning techniques used in predicting coronary heart disease (CHD, neural network (NN is popularly used to improve performance accuracy. Objective. Even though NN-based systems provide meaningful results based on clinical experiments, medical experts are not satisfied with their predictive performances because NN is trained in a “black-box” style. Method. We sought to devise an NN-based prediction of CHD risk using feature correlation analysis (NN-FCA using two stages. First, the feature selection stage, which makes features acceding to the importance in predicting CHD risk, is ranked, and second, the feature correlation analysis stage, during which one learns about the existence of correlations between feature relations and the data of each NN predictor output, is determined. Result. Of the 4146 individuals in the Korean dataset evaluated, 3031 had low CHD risk and 1115 had CHD high risk. The area under the receiver operating characteristic (ROC curve of the proposed model (0.749 ± 0.010 was larger than the Framingham risk score (FRS (0.393 ± 0.010. Conclusions. The proposed NN-FCA, which utilizes feature correlation analysis, was found to be better than FRS in terms of CHD risk prediction. Furthermore, the proposed model resulted in a larger ROC curve and more accurate predictions of CHD risk in the Korean population than the FRS.

  15. Analysis of risk management during AP1000 equipment technology transfer and localization

    International Nuclear Information System (INIS)

    Gao Yongjun; Guan Rui

    2009-01-01

    This article analyzes the risk factors existing in AP1000 equipment technology transfer and localization process by describing the invitation for bid, tender evaluation and contract negotiation process of the third-generation nuclear power plant technology introduction project of China and discusses the classification, evaluation and analysis methods of risks, and puts forward some referential suggestions for the successful introduction of equipment technology for AP1000 nuclear project. (authors)

  16. Comparison of methods for prioritizing risk in radiation oncology; Comparacao entre metodos de priorizacao de riscos em radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Biazoto, Bruna; Tokarski, Marcio, E-mail: bruna@ceb.unicamp.br [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Centro de Engenharia Biomedica

    2016-07-01

    Proactive risk management tools, such as Failure Mode and Effect Analysis (FEMA), were imported from engineering and have been widely used in Radiation Oncology. An important step in this process is the risk prioritization and there are many methods to do that. This paper compares the risk prioritization of computerized planning phase in interstitial implants with high dose rate brachytherapy performed with Health Care Failure Mode and Effect Analysis (HFMEA) and FMEA with guidelines given by the Task Group 100 (TG 100) of the American Association of Physicists in Medicine. Out of the 33 possible failure modes of this process, 21 require more attention when evaluated by HFMEA and 22, when evaluated by FMEA TG 100. Despite the high coincidence between the methods, the execution of HFMEA was simpler. (author)

  17. Current imaging methods for evaluation of metabolic risk in pediatric patients

    International Nuclear Information System (INIS)

    Balev, B.; Lateva, M.; Popova, R.; Teneva, Ts.; Iotova, V.

    2013-01-01

    Full text: Introduction: The incidence of cardio - metabolic diseases increase in an increasingly early age is one of the challenges of the 21st century. This phenomenon is attributed largely of the obesity epidemic, it is particularly significant when the obesity occurs in childhood - obese children have a greater probability of developing cardiovascular disease and diabetes earlier. What you will learn: The significance of the obesity epidemic in childhood and metabolic risk increase; The compartment of adipose tissue and their role in maintaining metabolic balance and its breach; The importance of imaging methods in recent studies related to obesity and cardio - metabolic diseases in children; New imaging methods for proofing of pathological fat accumulation in other tissues and organs and their role in the study of metabolic disorders. Discussion: Various studies of pathology at obesity prove that obesity indicators are not sufficient for individualized assessment of cardio - metabolic risk. Only by imaging methods, information about the accumulated fat in metabolically more active visceral and ectopic adipose tissue depots has been obtained. The most common imaging techniques for analysis of body composition and adiposity in children - dual-energy X-ray absorptiometry (DXA), ultrasound , computed tomography ( CT) scan , magnetic resonance imaging ( MRI), magnetic resonance spectroscopy (MRS) will be presented. Conclusion: The imaging methods are widely used in the obesity and metabolic risk studies, as the trend is to be applied increasingly into practice. The results from Imaging studies affect not only to therapeutic approach, but also to the motivation of parents and patients to comply prescribed measures

  18. Risk analysis for working with an analyzer for gamma cameras diagnostic

    International Nuclear Information System (INIS)

    Oramas Polo, Ivon; Figueroa del Valle, Diana G.

    2014-01-01

    In this work, an analysis of the risks for working with an analyzer for gamma cameras diagnostic was made. The method employed is based on determining the Hazard Rating Number (HRN). The results showed that the risks with higher value of HRN are electrocution with 100 and touch source container with hands with 75. These risks were classified as 'Very High' and 'High' respectively. The following risks were classified as 'Important': Fall of the source container (HRN = 25), high dose of the sample in the container (HRN = 20) and fracture of glass detector (HRN = 30). The wrong shielding of the source container (HRN = 10) is a risk that was classified as L ow . Safety rules for use of the system are indicated. An action plan for risk management is also presented. (author)

  19. Dairy product consumption and risk of hip fracture: a systematic review and meta-analysis

    OpenAIRE

    Bian, Shanshan; Hu, Jingmin; Zhang, Kai; Wang, Yunguo; Yu, Miaohui; Ma, Jie

    2018-01-01

    Background Dairy product consumption may affect the risk of hip fracture, but previous studies have reported inconsistent findings. The primary aim of our meta-analysis was to examine and quantify the potential association of dairy product consumption with risk of hip fracture. Methods We searched the databases of PubMed and EMBASE for relevant articles from their inception through April 17, 2017. The final analysis included 10 cohort studies and 8 case-control studies. Random-effects models ...

  20. Balancing precision and risk: should multiple detection methods be analyzed separately in N-mixture models?

    Directory of Open Access Journals (Sweden)

    Tabitha A Graves

    Full Text Available Using multiple detection methods can increase the number, kind, and distribution of individuals sampled, which may increase accuracy and precision and reduce cost of population abundance estimates. However, when variables influencing abundance are of interest, if individuals detected via different methods are influenced by the landscape differently, separate analysis of multiple detection methods may be more appropriate. We evaluated the effects of combining two detection methods on the identification of variables important to local abundance using detections of grizzly bears with hair traps (systematic and bear rubs (opportunistic. We used hierarchical abundance models (N-mixture models with separate model components for each detection method. If both methods sample the same population, the use of either data set alone should (1 lead to the selection of the same variables as important and (2 provide similar estimates of relative local abundance. We hypothesized that the inclusion of 2 detection methods versus either method alone should (3 yield more support for variables identified in single method analyses (i.e. fewer variables and models with greater weight, and (4 improve precision of covariate estimates for variables selected in both separate and combined analyses because sample size is larger. As expected, joint analysis of both methods increased precision as well as certainty in variable and model selection. However, the single-method analyses identified different variables and the resulting predicted abundances had different spatial distributions. We recommend comparing single-method and jointly modeled results to identify the presence of individual heterogeneity between detection methods in N-mixture models, along with consideration of detection probabilities, correlations among variables, and tolerance to risk of failing to identify variables important to a subset of the population. The benefits of increased precision should be weighed

  1. Analysis of related risk factors for pancreatic fistula after pancreaticoduodenectomy

    Directory of Open Access Journals (Sweden)

    Qi-Song Yu

    2016-08-01

    Full Text Available Objective: To explore the related risk factors for pancreatic fistula after pancreaticoduodenectomy to provide a theoretical evidence for effectively preventing the occurrence of pancreatic fistula. Methods: A total of 100 patients who were admitted in our hospital from January, 2012 to January, 2015 and had performed pancreaticoduodenectomy were included in the study. The related risk factors for developing pancreatic fistula were collected for single factor and Logistic multi-factor analysis. Results: Among the included patients, 16 had pancreatic fistula, and the total occurrence rate was 16% (16/100. The single-factor analysis showed that the upper abdominal operation history, preoperative bilirubin, pancreatic texture, pancreatic duct diameter, intraoperative amount of bleeding, postoperative hemoglobin, and application of somatostatin after operation were the risk factors for developing pancreatic fistula (P<0.05. The multi-factor analysis showed that the upper abdominal operation history, the soft pancreatic texture, small pancreatic duct diameter, and low postoperative hemoglobin were the dependent risk factors for developing pancreatic fistula (OR=4.162, 6.104, 5.613, 4.034, P<0.05. Conclusions: The occurrence of pancreatic fistula after pancreaticoduodenectomy is closely associated with the upper abdominal operation history, the soft pancreatic texture, small pancreatic duct diameter, and low postoperative hemoglobin; therefore, effective measures should be taken to reduce the occurrence of pancreatic fistula according to the patients’ own conditions.

  2. Relative risk analysis of several manufactured nanomaterials: an insurance industry context.

    Science.gov (United States)

    Robichaud, Christine Ogilvie; Tanzil, Dicksen; Weilenmann, Ulrich; Wiesner, Mark R

    2005-11-15

    A relative risk assessment is presented for the industrial fabrication of several nanomaterials. The production processes for five nanomaterials were selected for this analysis, based on their current or near-term potential for large-scale production and commercialization: single-walled carbon nanotubes, bucky balls (C60), one variety of quantum dots, alumoxane nanoparticles, and nano-titanium dioxide. The assessment focused on the activities surrounding the fabrication of nanomaterials, exclusive of any impacts or risks with the nanomaterials themselves. A representative synthesis method was selected for each nanomaterial based on its potential for scaleup. A list of input materials, output materials, and waste streams for each step of fabrication was developed and entered into a database that included key process characteristics such as temperature and pressure. The physical-chemical properties and quantities of the inventoried materials were used to assess relative risk based on factors such as volatility, carcinogenicity, flammability, toxicity, and persistence. These factors were first used to qualitatively rank risk, then combined using an actuarial protocol developed by the insurance industry for the purpose of calculating insurance premiums for chemical manufacturers. This protocol ranks three categories of risk relative to a 100 point scale (where 100 represents maximum risk): incident risk, normal operations risk, and latent contamination risk. Results from this analysis determined that relative environmental risk from manufacturing each of these five materials was comparatively low in relation to other common industrial manufacturing processes.

  3. RISK ASSESSMENT IN PROJECT PLANNING USING FMEA AND CRITICAL PATH METHOD

    Directory of Open Access Journals (Sweden)

    Sandra Milena CHOLES ARVILLA

    2014-10-01

    Full Text Available This paper is based upon the research undertaken for the development of the doctoral thesis “Management of software projects based on object-oriented technology”. The study examines the existing risk management practices commonly used for classic software development. The goal is to integrate the elements of the traditional risk management methodologies to create a new agile risk management methodology. The thesis focuses on techniques that can be easily implemented in extreme programming (XP and SCRUM. This study is motivated by the following research questions: What are the elements of existing quality assurance tools that could meet the principles of agile development? And is it possible to use risk estimation for improving quality in agile projects? The thesis presents a synthesis of the most common risk management techniques, as well as an introduction to agile methods XP and SCRUM. The proposal integrates the concepts of Failure Mode and Effect Analysis into the iterative life cycle of an agile software project. The thesis presents a metamodel which integrates the concepts of agile development methodologies: SCRUM and XP with the FMEA concepts for risk quantification. The model was partly implemented into a real development project. Partial results show the improvement in early identification of failures and allowed to reconsider the Sprint plan.

  4. Association of OPN rs11730582 polymorphism with cancer risk: a meta-analysis

    Directory of Open Access Journals (Sweden)

    He LL

    2016-03-01

    Full Text Available Lanlan He,1,* Yong Wang2,* 1Emergency Department, Zhenjiang First People’s Hospital, Zhenjiang, People’s Republic of China; 2Department of Interventional Radiology and Vascular Surgery, Zhongda Hospital, Southeast University, Nanjing, Jiangsu, People’s Republic of China *Both authors contributed equally to this work Purpose: Several molecular epidemiological studies have investigated the association between OPN rs11730582 C>T polymorphism and cancer risk, but the results are inconsistent. Hence, a meta-analysis was conducted to determine the association of this polymorphism with cancer risk. Materials and methods: The related articles were searched in PubMed, Embase, and Chinese National Knowledge Infrastructure databases. Pooled odds ratios and 95% confidence intervals were calculated to evaluate the strength of the associations. A random-effects model or fixed-effects model was employed depending on the heterogeneity. Results: A total of ten case-control studies involving 2,749 cancer cases and 3,398 controls were included in the meta-analysis. In overall analysis, OPN rs11730582 C>T polymorphism was not associated with cancer risk. In a stratified analysis by cancer type, no significant association was found between OPN rs11730582 C>T polymorphism and the risk of glioma, gastric cancer, and other cancers. Conclusion: This meta-analysis suggests that OPN rs11730582 C>T polymorphism is not associated with cancer susceptibility. Keywords: osteopontin, polymorphism, cancer, risk 

  5. Risk Analysis and Decision-Making Software Package (1997 Version) User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Chung, F.T.H.

    1999-02-11

    This manual provides instructions for using the U.S. Department of Energy's (DOE) risk analysis and decision making software (1997 version) developed at BDM Petroleum Technologies by BDM-Oklahoma, Inc. for DOE, under contract No. DE-AC22-94PC91OO8. This software provides petroleum producers with a simple, handy tool for exploration and production risk analysis and decision-making. It collects useful risk analysis tools in one package so that users do not have to use several programs separately. The software is simple to use, but still provides many functions. The 1997 version of the software package includes the following tools: (1) Investment risk (Gambler's ruin) analysis; (2) Monte Carlo simulation; (3) Best fit for distribution functions; (4) Sample and rank correlation; (5) Enhanced oil recovery method screening; and (6) artificial neural network. This software package is subject to change. Suggestions and comments from users are welcome and will be considered for future modifications and enhancements of the software. Please check the opening screen of the software for the current contact information. In the future, more tools will be added to this software package. This manual includes instructions on how to use the software but does not attempt to fully explain the theory and algorithms used to create it.

  6. The Use of Nonparametric Kernel Regression Methods in Econometric Production Analysis

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard

    and nonparametric estimations of production functions in order to evaluate the optimal firm size. The second paper discusses the use of parametric and nonparametric regression methods to estimate panel data regression models. The third paper analyses production risk, price uncertainty, and farmers' risk preferences...... within a nonparametric panel data regression framework. The fourth paper analyses the technical efficiency of dairy farms with environmental output using nonparametric kernel regression in a semiparametric stochastic frontier analysis. The results provided in this PhD thesis show that nonparametric......This PhD thesis addresses one of the fundamental problems in applied econometric analysis, namely the econometric estimation of regression functions. The conventional approach to regression analysis is the parametric approach, which requires the researcher to specify the form of the regression...

  7. 49 CFR 260.17 - Credit risk premium analysis.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Credit risk premium analysis. 260.17 Section 260... Financial Assistance § 260.17 Credit risk premium analysis. (a) When Federal appropriations are not available to cover the total subsidy cost, the Administrator will determine the Credit Risk Premium...

  8. Assessing risk of draft survey by AHP method

    Science.gov (United States)

    Xu, Guangcheng; Zhao, Kuimin; Zuo, Zhaoying; Liu, Gang; Jian, Binguo; Lin, Yan; Fan, Yukun; Wang, Fei

    2018-04-01

    The paper assesses the risks of vessel floating in the seawater for draft survey by using the analytic hierarchy process. On this basis, the paper established draft survey risk index from the view of draft reading, ballast water, fresh water, and calculation process and so on. Then the paper proposes the method to deal with risk assessment using one concrete sample.

  9. Spatial epidemiology of cancer: a review of data sources, methods and risk factors

    Directory of Open Access Journals (Sweden)

    Rita Roquette

    2017-05-01

    Full Text Available Cancer is a major concern among chronic diseases today. Spatial epidemiology plays a relevant role in this matter and we present here a review of this subject, including a discussion of the literature in terms of the level of geographic data aggregation, risk factors and methods used to analyse the spatial distribution of patterns and spatial clusters. For this purpose, we performed a websearch in the Pubmed and Web of Science databases including studies published between 1979 and 2015. We found 180 papers from 63 journals and noted that spatial epidemiology of cancer has been addressed with more emphasis during the last decade with research based on data mostly extracted from cancer registries and official mortality statistics. In general, the research questions present in the reviewed papers can be classified into three different sets: i analysis of spatial distribution of cancer and/or its temporal evolution; ii risk factors; iii development of data analysis methods and/or evaluation of results obtained from application of existing methods. This review is expected to help promote research in this area through the identification of relevant knowledge gaps. Cancer’s spatial epidemiology represents an important concern, mainly for public health policies design aimed to minimise the impact of chronic disease in specific populations.

  10. AN ANALYSIS OF RISK EVENTS IN THE OIL-TANKER MAINTENANCE BUSINESS

    Directory of Open Access Journals (Sweden)

    Roque Rabechini Junior

    2012-12-01

    Full Text Available This work presents the results of an investigation into risk events and their respective causes, carried out in ship maintenance undertakings in the logistical sector of the Brazilian oil industry. Its theoretical, conceptual positioning lies in those aspects related to risk management of the undertakings as instruments of support in decision making by executives in the tanker-maintenance business. The case-study method was used as an alternative methodology with a qualitative approach of an exploratory nature and, for the presentation of data, a descriptive format was chosen. Through the analysis of 75 risk events in projects of tanker docking it was possible to extract eight of the greatest relevance. The risk analysis facilitated the identification of actions aimed at their mitigation. As a conclusion it was possible to propose a risk-framework model in four categories, HSE (health, safety and the environment, technicians, externalities and management, designed to provide tanker-docking business executives and administrators, with evidence of actions to assist in their decision-making processes. Finally, the authors identified proposals for further study as well as showing the principal limitations of the study.

  11. Using Quantitative Data Analysis Techniques for Bankruptcy Risk Estimation for Corporations

    Directory of Open Access Journals (Sweden)

    Ştefan Daniel ARMEANU

    2012-01-01

    Full Text Available Diversification of methods and techniques for quantification and management of risk has led to the development of many mathematical models, a large part of which focused on measuring bankruptcy risk for businesses. In financial analysis there are many indicators which can be used to assess the risk of bankruptcy of enterprises but to make an assessment it is needed to reduce the number of indicators and this can be achieved through principal component, cluster and discriminant analyses techniques. In this context, the article aims to build a scoring function used to identify bankrupt companies, using a sample of companies listed on Bucharest Stock Exchange.

  12. Design of process displays based on risk analysis techniques

    International Nuclear Information System (INIS)

    Lundtang Paulsen, J.

    2004-05-01

    This thesis deals with the problems of designing display systems for process plants. We state the reasons why it is important to discuss information systems for operators in a control room, especially in view of the enormous amount of information available in computer-based supervision systems. The state of the art is discussed: How are supervision systems designed today and why? Which strategies are used? What kind of research is going on? Four different plants and their display systems, designed by the author, are described and discussed. Next we outline different methods for eliciting knowledge of a plant, particularly the risks, which is necessary information for the display designer. A chapter presents an overview of the various types of operation references: constitutive equations, set points, design parameters, component characteristics etc., and their validity in different situations. On the basis of her experience with the design of display systems; with risk analysis methods and from 8 years, as an engineer-on-shift at a research reactor, the author developed a method to elicit necessary information to the operator. The method, a combination of a Goal-Tree and a Fault-Tree, is described in some detail. Finally we address the problem of where to put the dot and the lines: when all information is on the table, how should it be presented most adequately. Included, as an appendix is a paper concerning the analysis of maintenance reports and visualization of their information. The purpose was to develop a software tool for maintenance supervision of components in a nuclear power plant. (au)

  13. COMPARATIVE ANALYSIS OF ESTIMATION METHODS OF PHARMACY ORGANIZATION BANKRUPTCY PROBABILITY

    Directory of Open Access Journals (Sweden)

    V. L. Adzhienko

    2014-01-01

    Full Text Available A purpose of this study was to determine the probability of bankruptcy by various methods in order to predict the financial crisis of pharmacy organization. Estimating the probability of pharmacy organization bankruptcy was conducted using W. Beaver’s method adopted in the Russian Federation, with integrated assessment of financial stability use on the basis of scoring analysis. The results obtained by different methods are comparable and show that the risk of bankruptcy of the pharmacy organization is small.

  14. Perceived Risks Associated with Contraceptive Method Use among Men and Women in Ibadan and Kaduna, Nigeria.

    Science.gov (United States)

    Schwandt, Hilary M; Skinner, Joanna; Hebert, Luciana E; Saad, Abdulmumin

    2015-12-01

    Research shows that side effects are often the most common reason for contraceptive non-use in Nigeria; however, research to date has not explored the underlying factors that influence risk and benefit perceptions associated with specific contraceptive methods in Nigeria. A qualitative study design using focus group discussions was used to explore social attitudes and beliefs about family planning methods in Ibadan and Kaduna, Nigeria. A total of 26 focus group discussions were held in 2010 with men and women of reproductive age, disaggregated by city, sex, age, marital status, neighborhood socioeconomic status, and--for women only--family planning experience. A discussion guide was used that included specific questions about the perceived risks and benefits associated with the use of six different family planning methods. A thematic content analytic approach guided the analysis. Participants identified a spectrum of risks encompassing perceived threats to health (both real and fictitious) and social concerns, as well as benefits associated with each method. By exploring Nigerian perspectives on the risks and benefits associated with specific family planning methods, programs aiming to increase contraceptive use in Nigeria can be better equipped to highlight recognized benefits, address specific concerns, and work to dispel misperceptions associated with each family planning method.

  15. The evolution of credit risk: phenomena, methods and management

    OpenAIRE

    George A. Christodoulakis

    2007-01-01

    This paper summarizes the proceedings of a conference at the Bank of Greece on credit risk. The papers presented focused on innovations in risk management methods which contribute to systemic financial stability, calculation of capital adequacy in financial institutions as well as the validation of credit rating methods in the context of Basel II.

  16. Breast Cancer Risk From Modifiable and Non-Modifiable Risk Factors among Women in Southeast Asia: A Meta-Analysis

    Science.gov (United States)

    Nindrea, Ricvan Dana; Aryandono, Teguh; Lazuardi, Lutfan

    2017-12-28

    Objective: The aim of this study was to determine breast cancer risk from modifiable and non-modifiable factors among women in Southeast Asia. Methods: This meta-analysis was performed on research articles on breast cancer risk factors in PubMed, ProQuest and EBSCO databases published between 1997 and October 2017. Pooled odds ratios (OR) are calculated using fixed and random-effect models. Data were processed using Review Manager 5.3 (RevMan 5.3). Results: From a total of 1,211 articles, 15 studies (1 cohort and 14 case control studies) met the criteria for systematic review. Meta-analysis results showed that of the known modifiable risk factors for breast cancer, parity (nulipara) had the highest odd ratio (OR = 1.85 [95% CI 1.47-2.32]) followed by body mass index (overweight) (OR = 1.61 [95% CI 1.43-1.80]) and use of oral contraceptives (OR = 1.27 [95% CI 1.07-1.51]). Of non-modifiable risk factors, family history of breast cancer had the highest odd ratio (OR = 2.53 [95% CI 1.25-5.09]), followed by age (≥ 40 years) (OR = 1.53 [95% CI 1.34-1.76]) and menopausal status (OR = 1.44 [95% CI 1.26-1.65]). Conclusion: This analysis confirmed associations between both modifiable risk factors (parity, body mass index and use of oral contraceptives) and non-modifiable risk factors (family history of breast cancer, age and menopausal status) with breast cancer. Creative Commons Attribution License

  17. Frequency-Risk and Duration-Risk Relationships between Aspirin Use and Gastric Cancer: A Systematic Review and Meta-Analysis

    Science.gov (United States)

    Gao, Yanhui; Liu, Li; Chen, Sidong

    2013-01-01

    Background Although previous meta-analyses have suggested an association between aspirin use and risk of gastric cancer, current evidence is inconsistent. Additionally, it remains unclear whether there are frequency-risk and duration-risk relationships and if a threshold of effect exists. Methods We identified studies by searching MEDLINE and PUBMED databases and reviewing relevant articles. We derived the summary risk estimates using fixed-effects or random-effects model based on homogeneity analysis. The dose-response meta-analysis was performed by linear trend regression and restricted cubic spline regression. Potential heterogeneity was tested using the Q statistic and quantified with the I 2 statistic. Subgroup analyses and Galbraith plots were used to explore the potential sources of heterogeneity. Publication bias was evaluated with funnel plots and quantified by the Begg's and Egger's test. Results Fifteen studies were included in this meta-analysis. There was an overall 29% reduced risk of gastric cancer corresponding to aspirin use (RR  = 0.71, 95% CI 0.60–0.82). We found there are nonlinear frequency-risk and linear duration-risk relations between aspirin use and gastric cancer. A monotonically decreasing relation was observed only for low-frequency (≤4.5 times/week) aspirin intake (10% decreased risk for once/week, 19% for twice/week and 29% for 4.5 times/week), and the frequency threshold of aspirin use is 4.5 times per week. Regarding those with duration of aspirin use, there was a tendency towards stronger risk reduction of gastric cancer for longer aspirin use (10% decreased risk for 4 years, 19% for 8 years and 28% for 12 years), and no duration threshold was observed. Conclusion Our findings suggest that long-term (≥4 years) and low-frequency (1–4.5 times per week) aspirin use is associated with a statistically significant, dose-dependent reduction in the risk of gastric cancer. PMID:23936269

  18. Frequency-risk and duration-risk relationships between aspirin use and gastric cancer: a systematic review and meta-analysis.

    Directory of Open Access Journals (Sweden)

    Xiaohua Ye

    Full Text Available BACKGROUND: Although previous meta-analyses have suggested an association between aspirin use and risk of gastric cancer, current evidence is inconsistent. Additionally, it remains unclear whether there are frequency-risk and duration-risk relationships and if a threshold of effect exists. METHODS: We identified studies by searching MEDLINE and PUBMED databases and reviewing relevant articles. We derived the summary risk estimates using fixed-effects or random-effects model based on homogeneity analysis. The dose-response meta-analysis was performed by linear trend regression and restricted cubic spline regression. Potential heterogeneity was tested using the Q statistic and quantified with the I (2 statistic. Subgroup analyses and Galbraith plots were used to explore the potential sources of heterogeneity. Publication bias was evaluated with funnel plots and quantified by the Begg's and Egger's test. RESULTS: Fifteen studies were included in this meta-analysis. There was an overall 29% reduced risk of gastric cancer corresponding to aspirin use (RR  = 0.71, 95% CI 0.60-0.82. We found there are nonlinear frequency-risk and linear duration-risk relations between aspirin use and gastric cancer. A monotonically decreasing relation was observed only for low-frequency (≤4.5 times/week aspirin intake (10% decreased risk for once/week, 19% for twice/week and 29% for 4.5 times/week, and the frequency threshold of aspirin use is 4.5 times per week. Regarding those with duration of aspirin use, there was a tendency towards stronger risk reduction of gastric cancer for longer aspirin use (10% decreased risk for 4 years, 19% for 8 years and 28% for 12 years, and no duration threshold was observed. CONCLUSION: Our findings suggest that long-term (≥4 years and low-frequency (1-4.5 times per week aspirin use is associated with a statistically significant, dose-dependent reduction in the risk of gastric cancer.

  19. Noninvasive non Doses Method for Risk Stratification of Breast Diseases

    Directory of Open Access Journals (Sweden)

    I. A. Apollonova

    2014-01-01

    Full Text Available The article concerns a relevant issue that is a development of noninvasive method for screening diagnostics and risk stratification of breast diseases. The developed method and its embodiment use both the analysis of onco-epidemiologic tests and the iridoglyphical research.Widely used onco-epidemiologic tests only reflect the patient’s subjective perception of her own life history and sickness. Therefore to confirm the revealed factors, modern objective and safe methods are necessary.Iridoglyphical research may be considered as one of those methods, since it allows us to reveal changes in iris’ zones in real time. As these zones are functionally linked with intern organs and systems, in this case mammary glands, changes of iris’ zones may be used to assess risk groups for mammary gland disorders.The article presents results of research conducted using a prototype of the hardwaresoftware complex to provide screening diagnostics and risk stratification of mammary gland disorders.Research has been conducted using verified materials, provided by the Biomedical Engineering Faculty and the Scientific Biometry Research and Development Centre of Bauman Moscow State Technical University, the City of Moscow’s GUZ Clinical and Diagnostic Centre N°4 of the Western Administrative District and the First Mammology (Breast Care Centre of the Russian Federation’s Ministry of Health and Social Development.The information, obtained as a result of onco-epidemiological tests and iridoglyphical research, was used to develop a procedure of quantitative diagnostics aimed to assess mammary gland cancer risk groups. The procedure is based on Bayes conditional probability.The task of quantitative diagnostics may be formally divided into the differential assessment of three states. The first, D1, is the norm, which corresponds to the population group with a lack of risk factors or changes of the mammary glands. The second, D2, is the population group

  20. Hydroproject risk analysis

    International Nuclear Information System (INIS)

    Murdock, R.V.; Gulliver, J.S.

    1991-01-01

    Traditionally, economic feasibility studies performed for potential hydropower plant sites have included either no uncertainty or at best an ad hoc value associated with estimated benefits. However, formal methods for analyzing uncertainty do exist and have been outlined in the past. An application of these methods is demonstrated through conversion of a hydropower survey program, HYFEAS, to run on LOTUS 1-2-3, using the add-in software package RISK. In this paper the program principals are outlined and a case study of it's application to a hydropower site is presented

  1. [Risk stratification of patients with diabetes mellitus undergoing coronary artery bypass grafting--a comparison of statistical methods].

    Science.gov (United States)

    Arnrich, B; Albert, A; Walter, J

    2006-01-01

    Among the coronary bypass patients from our Datamart database, we found a prevalence of 29.6% of diagnosed diabetics. 5.2% of the patients without a diagnosis of diabetes mellitus and a fasting plasma glucose level > 125 mg/dl were defined as undiagnosed diabetics. The objective of this paper was to compare univariate methods and techniques for risk stratification to determine, whether undiagnosed diabetes is per se a risk factor for increased ventilation time and length of ICU stay, and for increased prevalence of resuscitation, reintubation and 30-d mortality for diabetics in heart surgery. Univariate comparisons reveals that undiagnosed diabetics needed resuscitation significantly more often and had an increased ventilation time, while the length of ICU stay was significantly reduced. The significantly different distribution between the diabetics groups of 11 from 32 attributes examined, demands the use of methods for risk stratification. Both risk adjusted methods regression and matching confirm that undiagnosed diabetics had an increased ventilation time and an increased prevalence of resuscitation, while the length of ICU stay was not significantly reduced. A homogeneous distribution of the patient characteristics in the two diabetics groups could be achieved through a statistical matching method using the propensity score. In contrast to the regression analysis, a significantly increased prevalence of reintubation in undiagnosed diabetics was found. Based on an example of undiagnosed diabetics in heart surgery, the presented study reveals the necessity and the possibilities of techniques for risk stratification in retrospective analysis and shows how the potential of data collection from daily clinical practice can be used in an effective way.

  2. Putting problem formulation at the forefront of GMO risk analysis.

    Science.gov (United States)

    Tepfer, Mark; Racovita, Monica; Craig, Wendy

    2013-01-01

    When applying risk assessment and the broader process of risk analysis to decisions regarding the dissemination of genetically modified organisms (GMOs), the process has a tendency to become remarkably complex. Further, as greater numbers of countries consider authorising the large-scale dissemination of GMOs, and as GMOs with more complex traits reach late stages of development, there has been increasing concern about the burden posed by the complexity of risk analysis. We present here an improved approach for GMO risk analysis that gives a central role to problem formulation. Further, the risk analysis strategy has been clarified and simplified in order to make rigorously scientific risk assessment and risk analysis more broadly accessible to diverse stakeholder groups.

  3. Streamlining project delivery through risk analysis.

    Science.gov (United States)

    2015-08-01

    Project delivery is a significant area of concern and is subject to several risks throughout Plan Development : Process (PDP). These risks are attributed to major areas of project development, such as environmental : analysis, right-of-way (ROW) acqu...

  4. Insomnia and risk of dementia in older adults: Systematic review and meta-analysis.

    Science.gov (United States)

    de Almondes, Katie Moraes; Costa, Mônica Vieira; Malloy-Diniz, Leandro Fernandes; Diniz, Breno Satler

    2016-06-01

    There are cross-sectional evidences of an association between sleep disorders and cognitive impairment on older adults. However, there are no consensus by means of longitudinal studies data on the increased risk of developing dementia related to insomnia. We conduct a systematic review and meta-analysis to evaluate the risk of incident all-cause dementia in individuals with insomnia in population-based prospective cohort studies. Five studies of 5.242 retrieved references were included in the meta-analysis. We used the generic inverse variance method with a random effects model to calculate the pooled risk of dementia in older adults with insomnia. We assessed heterogeneity in the meta-analysis by means of the Q-test and I2 index. Study quality was assessed with the Newcastle-Ottawa Scale The results showed that Insomnia was associated with a significant risk of all-cause dementia (RR = 1.53 CI95% (1.07-2.18), z = 2.36, p = 0.02). There was evidence for significant heterogeneity in the analysis (q-value = 2.4, p < 0.001 I2 = 82%). Insomnia is associated with an increased risk for dementia. This results provide evidences that future studies should investigate dementia prevention among elderly individuals through screening and proper management of insomnia. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Development of A Standard Method for Human Reliability Analysis of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Jung, Won Dea; Kang, Dae Il; Kim, Jae Whan

    2005-12-01

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method

  6. Development of A Standard Method for Human Reliability Analysis of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Won Dea; Kang, Dae Il; Kim, Jae Whan

    2005-12-15

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method.

  7. Abstract analysis method facilitates filtering low-methodological quality and high-bias risk systematic reviews on psoriasis interventions.

    Science.gov (United States)

    Gómez-García, Francisco; Ruano, Juan; Aguilar-Luque, Macarena; Alcalde-Mellado, Patricia; Gay-Mimbrera, Jesús; Hernández-Romero, José Luis; Sanz-Cabanillas, Juan Luis; Maestre-López, Beatriz; González-Padilla, Marcelino; Carmona-Fernández, Pedro J; García-Nieto, Antonio Vélez; Isla-Tejera, Beatriz

    2017-12-29

    Article summaries' information and structure may influence researchers/clinicians' decisions to conduct deeper full-text analyses. Specifically, abstracts of systematic reviews (SRs) and meta-analyses (MA) should provide structured summaries for quick assessment. This study explored a method for determining the methodological quality and bias risk of full-text reviews using abstract information alone. Systematic literature searches for SRs and/or MA about psoriasis were undertaken on MEDLINE, EMBASE, and Cochrane database. For each review, quality, abstract-reporting completeness, full-text methodological quality, and bias risk were evaluated using Preferred Reporting Items for Systematic Reviews and Meta-analyses for abstracts (PRISMA-A), Assessing the Methodological Quality of Systematic Reviews (AMSTAR), and ROBIS tools, respectively. Article-, author-, and journal-derived metadata were systematically extracted from eligible studies using a piloted template, and explanatory variables concerning abstract-reporting quality were assessed using univariate and multivariate-regression models. Two classification models concerning SRs' methodological quality and bias risk were developed based on per-item and total PRISMA-A scores and decision-tree algorithms. This work was supported, in part, by project ICI1400136 (JR). No funding was received from any pharmaceutical company. This study analysed 139 SRs on psoriasis interventions. On average, they featured 56.7% of PRISMA-A items. The mean total PRISMA-A score was significantly higher for high-methodological-quality SRs than for moderate- and low-methodological-quality reviews. SRs with low-bias risk showed higher total PRISMA-A values than reviews with high-bias risk. In the final model, only 'authors per review > 6' (OR: 1.098; 95%CI: 1.012-1.194), 'academic source of funding' (OR: 3.630; 95%CI: 1.788-7.542), and 'PRISMA-endorsed journal' (OR: 4.370; 95%CI: 1.785-10.98) predicted PRISMA-A variability. Reviews with a

  8. Multi-hazard risk analysis for management strategies

    Science.gov (United States)

    Kappes, M.; Keiler, M.; Bell, R.; Glade, T.

    2009-04-01

    Risk management is very often operating in a reactive way, responding to an event, instead of proactive starting with risk analysis and building up the whole process of risk evaluation, prevention, event management and regeneration. Since damage and losses from natural hazards raise continuously more and more studies, concepts (e.g. Switzerland or South Tyrol-Bolozano) and software packages (e.g. ARMAGEDOM, HAZUS or RiskScape) are developed to guide, standardize and facilitate the risk analysis. But these approaches focus on different aspects and are mostly closely adapted to the situation (legislation, organization of the administration, specific processes etc.) of the specific country or region. We propose in this study the development of a flexible methodology for multi-hazard risk analysis, identifying the stakeholders and their needs, processes and their characteristics, modeling approaches as well as incoherencies occurring by combining all these different aspects. Based on this concept a flexible software package will be established consisting of ArcGIS as central base and being complemented by various modules for hazard modeling, vulnerability assessment and risk calculation. Not all modules will be developed newly but taken from the current state-of-the-art and connected or integrated into ArcGIS. For this purpose two study sites, Valtellina in Italy and Bacelonnette in France, were chosen and the hazards types debris flows, rockfalls, landslides, avalanches and floods are planned to be included in the tool for a regional multi-hazard risk analysis. Since the central idea of this tool is its flexibility this will only be a first step, in the future further processes and scales can be included and the instrument thus adapted to any study site.

  9. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

    Energy Technology Data Exchange (ETDEWEB)

    Tortorelli, J.P. [ed.] [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance.

  10. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

    International Nuclear Information System (INIS)

    Tortorelli, J.P.

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC's intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance

  11. Development of environmental risk assessment framework using index method

    International Nuclear Information System (INIS)

    Ali, M.W.; Wu, Y.

    2000-01-01

    This paper presents a newly developed framework for assessing the risk from events which are considered to be major accidents to the environment according to the classifications by the United Kingdom Department of Environment (DoE). The application of an environmental risk assessment framework using the newly developed index method is demonstrated by means of a case study. The framework makes use of Environmental Hazard Index (EHI) method by the United Kingdom AEA Technology for releases to river, but improves it by taking account to toxic dose rather than concentration; taking account of long-term effects including persistence and bio accumulation, not just short term effects; extending the method to all aspects of environment, not just rivers; and allowing account to be taken of design changes to mitigate the risk. The development of the framework has also led to a revision of the tolerability criteria to be used with the framework proposed earlier by weakness and recommend further work to improve this newly proposed environmental risk assessment framework. From the study, it is recommended that the environmental risk assessment framework be applied to a wide range of other case studies in order to further improve it. The framework should be modified to maintain consistency when the DoE revises its definitions of major accidents to the environment. Ease-of-use of the framework (and any other environmental framework) would be aided by the compilation of databases for environmental toxicity, river data and available consequence models. Further work could also be done to suggest methods of mitigating the risk and including them as numerical factors within method. (author)

  12. Chemical Mixtures Health Risk Assessment of Environmental Contaminants: Concepts, Methods, Applications

    Science.gov (United States)

    This problems-based, introductory workshop focuses on methods to assess health risks posed by exposures to chemical mixtures in the environment. Chemical mixtures health risk assessment methods continue to be developed and evolve to address concerns over health risks from multic...

  13. Alternative Testing Methods for Predicting Health Risk from Environmental Exposures

    Directory of Open Access Journals (Sweden)

    Annamaria Colacci

    2014-08-01

    Full Text Available Alternative methods to animal testing are considered as promising tools to support the prediction of toxicological risks from environmental exposure. Among the alternative testing methods, the cell transformation assay (CTA appears to be one of the most appropriate approaches to predict the carcinogenic properties of single chemicals, complex mixtures and environmental pollutants. The BALB/c 3T3 CTA shows a good degree of concordance with the in vivo rodent carcinogenesis tests. Whole-genome transcriptomic profiling is performed to identify genes that are transcriptionally regulated by different kinds of exposures. Its use in cell models representative of target organs may help in understanding the mode of action and predicting the risk for human health. Aiming at associating the environmental exposure to health-adverse outcomes, we used an integrated approach including the 3T3 CTA and transcriptomics on target cells, in order to evaluate the effects of airborne particulate matter (PM on toxicological complex endpoints. Organic extracts obtained from PM2.5 and PM1 samples were evaluated in the 3T3 CTA in order to identify effects possibly associated with different aerodynamic diameters or airborne chemical components. The effects of the PM2.5 extracts on human health were assessed by using whole-genome 44 K oligo-microarray slides. Statistical analysis by GeneSpring GX identified genes whose expression was modulated in response to the cell treatment. Then, modulated genes were associated with pathways, biological processes and diseases through an extensive biological analysis. Data derived from in vitro methods and omics techniques could be valuable for monitoring the exposure to toxicants, understanding the modes of action via exposure-associated gene expression patterns and to highlight the role of genes in key events related to adversity.

  14. Risk management guide

    International Nuclear Information System (INIS)

    Briscoe, G.J.

    1977-06-01

    Risk management requires an assessment or a knowledge of risk. This, in turn, requires identification of hazards (sources of risk) and a determination of risk (evaluation of the hazard degree). The hazard identification and risk analysis techniques presented in this Guide are, in general, based on the MORT concept that accidents result from unwanted energy flow in the absence of adequate controls and/or barriers. This Guide presents an analytical tree designed to prevent oversight of specific energy sources in risk identification. Hazard identification by field personnel is also discussed. Quantitative risk analysis is discussed in the following section. A method for summary of the risks for each energy classification is given. This method uses a graphical log-normal projection so that low probability events, which are not adequately represented in the experience data, are included in the risk assessment. This permits a more acceptable risk assessment since catastrophes are not ignored, even though the actual risk is only approximated. In addition, a few examples of risk analysis of specific hazards are given. Rudimentary probability and fault tree theory are used in these examples. Total risk assessment and resource allocation and safety performance trend analysis are discussed

  15. Environmental risk analysis of hazardous material rail transportation

    Energy Technology Data Exchange (ETDEWEB)

    Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Werth, Charles J.; Schaeffer, David [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Yoon, Hongkyu [Sandia National Laboratories, Albuquerque, NM 87123 (United States); Barkan, Christopher P.L. [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States)

    2014-01-15

    Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials.

  16. Environmental risk analysis of hazardous material rail transportation

    International Nuclear Information System (INIS)

    Saat, Mohd Rapik; Werth, Charles J.; Schaeffer, David; Yoon, Hongkyu; Barkan, Christopher P.L.

    2014-01-01

    Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials

  17. Proposal of a method for evaluating tsunami risk using response-surface methodology

    Science.gov (United States)

    Fukutani, Y.

    2017-12-01

    Information on probabilistic tsunami inundation hazards is needed to define and evaluate tsunami risk. Several methods for calculating these hazards have been proposed (e.g. Løvholt et al. (2012), Thio (2012), Fukutani et al. (2014), Goda et al. (2015)). However, these methods are inefficient, and their calculation cost is high, since they require multiple tsunami numerical simulations, therefore lacking versatility. In this study, we proposed a simpler method for tsunami risk evaluation using response-surface methodology. Kotani et al. (2016) proposed an evaluation method for the probabilistic distribution of tsunami wave-height using a response-surface methodology. We expanded their study and developed a probabilistic distribution of tsunami inundation depth. We set the depth (x1) and the slip (x2) of an earthquake fault as explanatory variables and tsunami inundation depth (y) as an object variable. Subsequently, tsunami risk could be evaluated by conducting a Monte Carlo simulation, assuming that the generation probability of an earthquake follows a Poisson distribution, the probability distribution of tsunami inundation depth follows the distribution derived from a response-surface, and the damage probability of a target follows a log normal distribution. We applied the proposed method to a wood building located on the coast of Tokyo Bay. We implemented a regression analysis based on the results of 25 tsunami numerical calculations and developed a response-surface, which was defined as y=ax1+bx2+c (a:0.2615, b:3.1763, c=-1.1802). We assumed proper probabilistic distribution for earthquake generation, inundation height, and vulnerability. Based on these probabilistic distributions, we conducted Monte Carlo simulations of 1,000,000 years. We clarified that the expected damage probability of the studied wood building is 22.5%, assuming that an earthquake occurs. The proposed method is therefore a useful and simple way to evaluate tsunami risk using a response

  18. Occlusal caries risk assessment using Cariogram analysis in student aged 11-12 years

    Directory of Open Access Journals (Sweden)

    Riana Wardani

    2017-03-01

    Full Text Available ABSTRACT   Introduction: Basic Health Research 2013 showed Dental Caries Index in school age student in West Java was lower than the expected target, with occlusal surface as most affected part. The purpose of this study was to determine the risk status of dental caries in school age student by using cariogram analysis. Methods: Observational research. Study was conducted on 30 student aged 11-12 years with caries high risk on occlusal surfaces. Purposive sampling was taken from students of SDN Cikawari and SDN Mekarjaya Bandung Regency with high DMF-S index. Inclusion criteria: male and female, aged 11-12 years, good systemic health, SDN Mekarjaya and SDN Cikawari Bandung Regency students. Exclusion criteria: suffering from systemic disorder, currently in long-term antibiotic therapy, orthodontic appliance usage. Case history, eating habits and intake of fluoride, caries experience, salivary volume and buffering capacity of each sample was examined using cariogram examination method. Results: The cariogram analysis showed 43% chance of caries avoidance. Diet control was 23.3%, includes two factors: sugary foods and eating frequency. Bacteria control was 11.9% by evaluating both bacterial factors (the amount of plaque and the bacteria Streptococcus mutans. Vulnerability control was 14.4%, including caries prevention by the continuation of fluorine program and other conditions control that affect salivary secretions. Conclusion: Based on cariogram analysis found that all samples who had occlusal surfaces caries were at a high risk category, but still having moderate potential of avoiding new caries occurrence by controlling risk factors. Keywords: Cariogram analysis, Occlusal caries, Aged 11-12 years

  19. A systematic review and appraisal of methods of developing and validating lifestyle cardiovascular disease risk factors questionnaires.

    Science.gov (United States)

    Nse, Odunaiya; Quinette, Louw; Okechukwu, Ogah

    2015-09-01

    Well developed and validated lifestyle cardiovascular disease (CVD) risk factors questionnaires is the key to obtaining accurate information to enable planning of CVD prevention program which is a necessity in developing countries. We conducted this review to assess methods and processes used for development and content validation of lifestyle CVD risk factors questionnaires and possibly develop an evidence based guideline for development and content validation of lifestyle CVD risk factors questionnaires. Relevant databases at the Stellenbosch University library were searched for studies conducted between 2008 and 2012, in English language and among humans. Using the following databases; pubmed, cinahl, psyc info and proquest. Search terms used were CVD risk factors, questionnaires, smoking, alcohol, physical activity and diet. Methods identified for development of lifestyle CVD risk factors were; review of literature either systematic or traditional, involvement of expert and /or target population using focus group discussion/interview, clinical experience of authors and deductive reasoning of authors. For validation, methods used were; the involvement of expert panel, the use of target population and factor analysis. Combination of methods produces questionnaires with good content validity and other psychometric properties which we consider good.

  20. IDENTIFYING HIGH-RISK POPULATIONS OF TUBERCULOSIS USING ENVIRONMENTAL FACTORS AND GIS BASED MULTI-CRITERIA DECISION MAKING METHOD

    Directory of Open Access Journals (Sweden)

    A. R. Abdul Rasam

    2016-09-01

    Full Text Available Development of an innovative method to enhance the detection of tuberculosis (TB in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1 to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

  1. Web Applications Vulnerability Management using a Quantitative Stochastic Risk Modeling Method

    Directory of Open Access Journals (Sweden)

    Sergiu SECHEL

    2017-01-01

    Full Text Available The aim of this research is to propose a quantitative risk modeling method that reduces the guess work and uncertainty from the vulnerability and risk assessment activities of web based applications while providing users the flexibility to assess risk according to their risk appetite and tolerance with a high degree of assurance. The research method is based on the research done by the OWASP Foundation on this subject but their risk rating methodology needed de-bugging and updates in different in key areas that are presented in this paper. The modified risk modeling method uses Monte Carlo simulations to model risk characteristics that can’t be determined without guess work and it was tested in vulnerability assessment activities on real production systems and in theory by assigning discrete uniform assumptions to all risk charac-teristics (risk attributes and evaluate the results after 1.5 million rounds of Monte Carlo simu-lations.

  2. Probabilistic risk analysis and its role in regulatory activity in a developing country

    International Nuclear Information System (INIS)

    Arredondo-Sanchez, C.

    1985-01-01

    The author discusses the criterion adopted for regulatory activity in a developing country with a nuclear power plant. He describes the problems that have to be overcome as a result of changes in the regulations during construction of the plant. There is discussion of the action taken by the regulatory body when introducing the method of probabilistic risk analysis. The part played by this form of analysis in quantifying the safety objectives proposed in the USA together with its limitations and the problems involved in this methodology are examined. Lastly, the author gives an opinion on the use that probabilistic risk analysis should be put to in developing countries such as Mexico. (author)

  3. Fracture risk in patients with type 2 diabetes mellitus and possible risk factors: a systematic review and meta-analysis

    Directory of Open Access Journals (Sweden)

    Moayeri A

    2017-04-01

    Full Text Available Ardeshir Moayeri,1 Mahmoud Mohamadpour,2 Seyedeh Fatemeh Mousavi,3 Ehsan Shirzadpour,2 Safoura Mohamadpour,3 Mansour Amraei4 1Department of Anatomy, 2Department of Biochemistry, Faculty of Medicine, 3Department of Epidemiology, Prevention of Psychosocial Injuries Research Center, 4Department of Physiology, Faculty of Medicine, Ilam University of Medical Sciences, Ilam, Iran Aim: Patients with type 2 diabetes mellitus (T2DM have an increased risk of bone fractures. A variable increase in fracture risk has been reported depending on skeletal site, diabetes duration, study design, insulin use, and so on. The present meta-analysis aimed to investigate the association between T2DM with fracture risk and possible risk factors.Methods: Different databases including PubMed, Institute for Scientific Information, and Scopus were searched up to May 2016. All epidemiologic studies on the association between T2DM and fracture risk were included. The relevant data obtained from these papers were analyzed by a random effects model and publication bias was assessed by funnel plot. All analyses were done by R software (version 3.2.1 and STATA (version 11.1.Results: Thirty eligible studies were selected for the meta-analysis. We found a statistically significant positive association between T2DM and hip, vertebral, or foot fractures and no association between T2DM and wrist, proximal humerus, or ankle fractures. Overall, T2DM was associated with an increased risk of any fracture (summary relative risk =1.05, 95% confidence interval: 1.04, 1.06 and increased with age, duration of diabetes, and insulin therapy.Conclusion: Our findings strongly support an association between T2DM and increased risk of overall fracture. These findings emphasize the need for fracture prevention strategies in patients with diabetes. Keywords: diabetes mellitus, fractures, bone, osteoporosis, risk factors, meta-analysis

  4. Selection of Investment Projects by Monte Carlo Method in Risk Condition

    Directory of Open Access Journals (Sweden)

    M. E.

    2017-12-01

    Full Text Available The Monte Carlo method (also known as the Monte Carlo simulation was proposed by Nicholas Metropolis, S. Ulam and Jhon Von Neiman in 50-th years of the past century. The method can be widely applied to analysis of investment projects due to the advantages recognized both by practitioners and the academic community. The balance model of a project with discounted financial flows has been implemented for Microsoft Excel and Google Docs spread-sheet solutions. The Monte Carlo method for project with low and high correlated net present value (NPV parameters in the environment of the electronic tables of MS Excel/Google Docs. A distinct graduation of risk was identified. A necessity of account of correlation effects and the use of multivariate imitation during the project selection has been demonstrated.

  5. Methods of currency risk management in foreign trade

    Directory of Open Access Journals (Sweden)

    V.V. Ksendzuk

    2016-03-01

    Full Text Available Development of the country’s market national economy is closely connected with international economic relations. Therefore national business entities are actively involved in foreign trade, and their positive results influence not only on the status and income of owners, but form the economic potential of the country. The survey describes the main indicators of foreign trade and the impact of export and import transactions on economic development of Ukraine, particularly on the gross domestic income of the country. Taking into account also the negative trends in foreign currency exchange rates, the article considers the types of currency risks that accompany international transactions and identifies the limits of the usefulness of currency risk management methods. The methods of currency risk management are also systematized, the benefits of their use for the enterprise are considered and the status and readiness of Ukraine’s financial market to ensure appropriate conditions for the functioning of the currency risk management in domestic enterprises are analyzed.

  6. The comparison of cardiovascular risk scores using two methods of substituting missing risk factor data in patient medical records

    Directory of Open Access Journals (Sweden)

    Andrew Dalton

    2011-07-01

    Conclusions A simple method of substituting missing risk factor data can produce reliable estimates of CVD risk scores. Targeted screening for high CVD risk, using pre-existing electronic medical record data, does not require multiple imputation methods in risk estimation.

  7. [The methods of assessment of health risk from exposure to radon and radon daughters].

    Science.gov (United States)

    Demin, V F; Zhukovskiy, M V; Kiselev, S M

    2014-01-01

    The critical analysis of existing models of the relationship dose-effect (RDE) for radon exposure on human health has been performed. Conclusion about the necessity and possibility of improving these models has been made. A new improved version ofthe RDE has been developed. A technique for assessing the human health risk of exposure to radon, including the method for estimating of exposure doses of radon, an improved model of RDE, proper methodology risk assessment has been described. Methodology is proposed for the use in the territory of Russia.

  8. Risk management for engineering projects procedures, methods and tools

    CERN Document Server

    Munier, Nolberto

    2014-01-01

    Many people see risk in engineering projects as an imprecise and nebulous problem - something that exists, is feared and is impossible to deal with. Nothing could be further from the truth. While risk is certainly ubiquitous, sometimes difficult to detect, and cannot always be completely avoided, it can generally be mitigated, reduced or prevented through timely analysis and action.   This book covers the entire process of risk management by providing methodologies for determining the sources of project risk, and once threats have been identified, managing them through:   ·         identification and assessment (probability, relative importance, variables, risk breakdown structure, etc.) ·         implementation of measures for their prevention, reduction or mitigation ·         evaluation of impacts and quantification of risks ·         establishment of control measures   It also considers sensitivity analysis to determine the influence of uncertain parameters values ...

  9. Risk Assessment for Water Supply Systems in Iran During Crises Using the RAMCAP Method

    Directory of Open Access Journals (Sweden)

    Jalal Nakhaei

    2017-09-01

    Full Text Available Heavy damages might be inflicted upon national infrastructure due to a variety of disasters caused by natural events or human activities. One example of such vital infrastructure at risk is the water supply system. At the time of crises, the water supply system is expected to continue supplying water to citizens, or the crisis will be augmented. This warrants the potential threats and their effects on the system to be identified and evaluated in an attempt to determine the vulnerable systems and sites toward proper solutions. In this study, the assets and the associated threats of the water supply are identified followed by a vulnerability analysis. The RAMCAP method is then employed to determine values for the risks associated with each of the assets including dams, water storage systems, pumping stations, treatment plants, water wells, and building units. Methods are proposed to reduce these risks before a crisis occurs. In addition, basic threats due to air-missile and Cyber attacks are also considered.

  10. RISK ANALYSIS APPLIED IN OIL EXPLORATION AND PRODUCTION

    African Journals Online (AJOL)

    ES Obe

    aDepartment of Civil Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria. ... The analysis in this work is ... risk analysis, oil field, risk management, projects, investment opportunity. 1. .... own merit but since the company has limited.

  11. Association among Dietary Flavonoids, Flavonoid Subclasses and Ovarian Cancer Risk: A Meta-Analysis

    Science.gov (United States)

    You, Ruxu; Yang, Yu; Liao, Jing; Chen, Dongsheng; Yu, Lixiu

    2016-01-01

    Background Previous studies have indicated that intake of dietary flavonoids or flavonoid subclasses is associated with the ovarian cancer risk, but presented controversial results. Therefore, we conducted a meta-analysis to derive a more precise estimation of these associations. Methods We performed a search in PubMed, Google Scholar and ISI Web of Science from their inception to April 25, 2015 to select studies on the association among dietary flavonoids, flavonoid subclasses and ovarian cancer risk. The information was extracted by two independent authors. We assessed the heterogeneity, sensitivity, publication bias and quality of the articles. A random-effects model was used to calculate the pooled risk estimates. Results Five cohort studies and seven case-control studies were included in the final meta-analysis. We observed that intake of dietary flavonoids can decrease ovarian cancer risk, which was demonstrated by pooled RR (RR = 0.82, 95% CI = 0.68–0.98). In a subgroup analysis by flavonoid subtypes, the ovarian cancer risk was also decreased for isoflavones (RR = 0.67, 95% CI = 0.50–0.92) and flavonols (RR = 0.68, 95% CI = 0.58–0.80). While there was no compelling evidence that consumption of flavones (RR = 0.86, 95% CI = 0.71–1.03) could decrease ovarian cancer risk, which revealed part sources of heterogeneity. The sensitivity analysis indicated stable results, and no publication bias was observed based on the results of Funnel plot analysis and Egger’s test (p = 0.26). Conclusions This meta-analysis suggested that consumption of dietary flavonoids and subtypes (isoflavones, flavonols) has a protective effect against ovarian cancer with a reduced risk of ovarian cancer except for flavones consumption. Nevertheless, further investigations on a larger population covering more flavonoid subclasses are warranted. PMID:26960146

  12. Cost-effectiveness analysis of risk reduction at nuclear power plants: What have we learned from experience

    International Nuclear Information System (INIS)

    Lochard, J.; Pages, P.

    1984-01-01

    Within the field of risk management techniques, cost-effectiveness analysis of risk reduction is now recognized as an adequate method for evaluating and defining the optimal allocation of protection and safety resources within large industrial systems. The paper considers some of the issues that arise in connection with cost-effectiveness analysis of risk reduction at nuclear power stations. Particular attention is called to both the interdependence between criteria that characterize risk reduction problems and the resulting aggregation and weighting procedures needed when the multidimensionality of criteria is explicitly taken into account. The discussion of these problems is illustrated with results of case studies on both public and occupational risk reduction at French PWRs during normal operation. (author)

  13. Private participation in infrastructure: A risk analysis of long-term contracts in power sector

    Science.gov (United States)

    Ceran, Nisangul

    The objective of this dissertation is to assess whether the private participation in energy sector through long term contracting, such as Build-Operate-Transfer (BOT) type investments, is an efficient way of promoting efficiency in the economy. To this end; the theoretical literature on the issue is discussed, the experience of several developing countries are examined, and a BOT project, which is undertaken by the Enron company in Turkey, has been studied in depth as a case study. Different risk analysis techniques, including sensitivity and probabilistic risk analysis with the Monte Carlo Simulation (MCS) method have been applied to assess the financial feasibility and risks of the case study project, and to shed light on the level of rent-seeking in the BOT agreements. Although data on rent seeking and corruption is difficult to obtain, the analysis of case study investment using the sensitivity and MCS method provided some information that can be used in assessing the level of rent-seeking in BOT projects. The risk analysis enabled to test the sustainability of the long-term BOT contracts through the analysis of projects financial feasibility with and without the government guarantees in the project. The approach of testing the sustainability of the project under different scenarios is helpful to understand the potential costs and contingent liabilities for the government and project's impact on a country's overall economy. The results of the risk analysis made by the MCS method for the BOT project used as the case study strongly suggest that, the BOT projects does not serve to the interest of the society and transfers substantial amount of public money to the private companies, implying severe governance problems. It is found that not only government but also private sector may be reluctant about full privatization of infrastructure due to several factors such as involvement of large sunk costs, very long time period for returns to be received, political and

  14. Statistical methods for site-specific analysis of cancer among the A-bomb survivors

    International Nuclear Information System (INIS)

    Pierce, D.A.; Preston, D.L.

    1992-01-01

    Statistical methods are presented for joint, or simultaneous, analysis of the risks of several types of cancer for the A-bomb survivors. Previous analyses have been made either for all cancers except leukemia together, or have been done separately by cancer type. Either of these approaches has serious limitations, and the aim of joint analysis is to overcome these, while taking advantage of the strengths of each. The primary advantage of joint analysis is that models for risks of various cancer types can have some parameters in common, and others which are type-specific. This serves to overcome difficulties due to the limited data on specific cancer types. It also provides for significant tests comparing both type-specific risks and type-specific effects of modifying factors such as sex and age. These methods are exemplified here by joint analysis of three classes of cancer considered by the BEIR-V committee: (i) respiratory, (ii) digestive, and (iii) other cancers, excluding leukemia and breast cancer. The primary aim is to illustrate the general advantages of joint analyses, but in addition some comparison is made between the results of such joint analyses and the conclusions drawn by BEIR-V committee from separate analyses. (author)

  15. A method of risk assessment for a multi-plant site

    International Nuclear Information System (INIS)

    White, R.F.

    1983-06-01

    A model is presented which can be used in conjunction with probabilistic risk assessment to estimate whether a site on which there are several plants (reactors or chemical plants containing radioactive materials) meets whatever risk acceptance criteria or numerical risk guidelines are applied at the time of the assessment in relation to various groups of people and for various sources of risk. The application of the multi-plant site model to the direct and inverse methods of risk assessment is described. A method is proposed by which the potential hazard rating associated with a given plant can be quantified so that an appropriate allocation can be made when assessing the risks associated with each of the plants on a site. (author)

  16. Fish intake and ovarian cancer risk: a meta-analysis of 15 case-control and cohort studies.

    Directory of Open Access Journals (Sweden)

    Pei-yue Jiang

    Full Text Available BACKGROUND: Previous epidemiological studies have shown that fish consumption may modify the risk of ovarian cancer. However, these studies yielded controversial results. The present meta-analysis was undertaken to evaluate the relationship between fish intake and ovarian cancer risk. METHODS: A literature search was carried out using Pubmed, Embase, and Cochrane Library Central database for all relevant studies up to August 2013. We pooled the relative risks (RR from individual studies using fixed-effect or random-effect model, and carried out heterogeneity and publication bias analyses. RESULTS: A total of 15 (ten case-control, and five cohort studies were included in the present meta-analysis, representing data for 889,033 female subjects and 6,087 ovarian cancer cases. We found that total fish intake was not significantly associated with the risk of ovarian cancer among cohort studies (RR = 1.04 95% CI [0.89, 1.22] as well as case-control studies (RR = 0.90, 95% CI [0.73,1.12]. There was no evidence of publication bias as suggested by Begg's test (P = 0.55 and Egger's test(P = 0.29. CONCLUSIONS: The present meta-analysis showed that total fish consumption was not significantly associated with the risk of ovarian cancer. Further analysis on different fish species and food preparation methods should be conducted in future studies.

  17. Analysis of risk factors in the development of retinopathy of prematurity

    Directory of Open Access Journals (Sweden)

    Knežević Sanja

    2011-01-01

    Full Text Available Introduction. Retinopathy of prematurity (ROP is a multifactorial disease that occurs most frequently in very small and very sick preterm infants, and it has been identified as the major cause of childhood blindness. Objective. The aim of this study was to evaluate ROP incidence and risk factors associated with varying degrees of illness. Methods. The study was conducted at the Centre for Neonatology, Paediatric Clinic of the Clinical Centre Kragujevac, Serbia, in the period from June 2006 to December 2008. Ophthalmologic screening was performed in all children with body weight lower than 2000 g or gestational age lower than 36 weeks. We analyzed eighteen postnatal and six perinatal risk factors and the group correlations for each of the risk factors. Results. Out of 317 children that were screened, 56 (17.7% developed a mild form of ROP, while 68 (21.5% developed a severe form. Univariate analysis revealed a large number of statistically significant risk factors for the development of ROP, especially the severe form. Multivariate logistical analysis further separated two independent risk factors: small birth weight (p=0.001 and damage of central nervous system (p=0.01. Independent risk factors for transition from mild to severe forms of ROP were identified as: small birth weight (p=0.05 and perinatal risk factors (p=0.02. Conclusion. Small birth weight and central nervous system damage were risk factors for the development of ROP, perinatal risk factors were identified as significant for transition from mild to severe form of ROP.

  18. Cyber Risk Management for Critical Infrastructure: A Risk Analysis Model and Three Case Studies.

    Science.gov (United States)

    Paté-Cornell, M-Elisabeth; Kuypers, Marshall; Smith, Matthew; Keller, Philip

    2018-02-01

    Managing cyber security in an organization involves allocating the protection budget across a spectrum of possible options. This requires assessing the benefits and the costs of these options. The risk analyses presented here are statistical when relevant data are available, and system-based for high-consequence events that have not happened yet. This article presents, first, a general probabilistic risk analysis framework for cyber security in an organization to be specified. It then describes three examples of forward-looking analyses motivated by recent cyber attacks. The first one is the statistical analysis of an actual database, extended at the upper end of the loss distribution by a Bayesian analysis of possible, high-consequence attack scenarios that may happen in the future. The second is a systems analysis of cyber risks for a smart, connected electric grid, showing that there is an optimal level of connectivity. The third is an analysis of sequential decisions to upgrade the software of an existing cyber security system or to adopt a new one to stay ahead of adversaries trying to find their way in. The results are distributions of losses to cyber attacks, with and without some considered countermeasures in support of risk management decisions based both on past data and anticipated incidents. © 2017 Society for Risk Analysis.

  19. Risk of herpes zoster and family history: A Meta-analysis of case–control studies

    Directory of Open Access Journals (Sweden)

    Yi Chun Lai

    2016-01-01

    Full Text Available Background: Herpes zoster (HZ results from the reactivation of latent varicella zoster virus (VZV residing in dorsal root and cranial nerve ganglia. Advanced age and dysfunctional cell-mediated immune responses are well-established risk factors for VZV reactivation. There have been recent interests in whether there is an increased risk of the disease associated with a positive family history. Aims and Objectives: We aimed to conduct a meta-analysis to evaluate the association between HZ infection and family history. In addition, we investigated the dose-response relationship between HZ infection and the number of relatives with a history of HZ. Materials and Methods: Observational studies were searched from MEDLINE, EMBASE, and Cochrane Central Register from inception to April 15, 2015. The Meta-analysis of Observational Studies in Epidemiology guidelines were followed in conducting this study. To estimate the pooled odds ratio, random-effects model of DerSimonian and Laird was used. Heterogeneity between studies was assessed using the I2 statistic. A dose-response meta-analysis with studies that reported appropriate data were done using the generalized least squares for trend method. Results: Five studies, yielding a total of 4169 subjects, were identified for meta-analysis. Cases with HZ were 3.03 (95% confidence interval [CI]: 1.86–4.94, P < 0.001 and 3.27 (95% CI: 1.75–6.10, P < 0.001 times more likely to report the first-degree relatives and total relatives with a history of HZ, respectively. A significant positive dose-response relationship between the risk of HZ infection and the number of relatives with a history of HZ was also demonstrated (P < 0.001. Conclusions: This meta-analysis demonstrated that family history is a significant risk factor for HZ infection. This risk has a dose-response relationship with the number of relatives with a history of HZ.

  20. A FTA-based method for risk decision-making in emergency response

    DEFF Research Database (Denmark)

    Liu, Yang; Li, Hongyan

    2014-01-01

    Decision-making problems in emergency response are usually risky and uncertain due to the limited decision data and possible evolvement of emergency scenarios. This paper focuses on a risk decisionmaking problem in emergency response with several distinct characteristics including dynamic...... evolvement process of emergency, multiple scenarios, and impact of response actions on the emergency scenarios. A method based on Fault Tree Analysis (FTA) is proposed to solve the problem. By analyzing the evolvement process of emergency, the Fault Tree (FT) is constructed to describe the logical relations...

  1. State of the art and risk analysis for CO2 storage in a saline aquifer. Investigation report

    International Nuclear Information System (INIS)

    Farret, R.; Gombert, P.; Hulot, C.; BOUR, Olivier; Thoraval, Alain

    2010-01-01

    This study deals with the impact of supercritical CO 2 injection in deep saline aquifer, but also addresses the case of depleted hydrocarbons fields. After a general presentation of the carbon capture and storage (CCS) technique, this report presents the main principles of risk analysis and defines an analysis method applicable to the whole CCS sector. It is based on practices coming from the field of industrial risk analysis, on the knowledge of underground processes, and on the state of the art of health risk analysis in the case of chemical species. The main considered risks are hydraulic risks (fluid pressurization), mechanical risks (cracking, soil rising and induced seismicity), CO 2 migration or leakages towards aquifers and surface, and migration of other species than CO 2 . The report addresses the characterisation of fluids and of possible geochemical evolutions, the characterisation of scenarios of fluid migration, and the hierarchy of health impacts related to fluid leakages

  2. Supplier Risk Assessment Based on Best-Worst Method and K-Means Clustering: A Case Study

    Directory of Open Access Journals (Sweden)

    Merve Er Kara

    2018-04-01

    Full Text Available Supplier evaluation and selection is one of the most critical strategic decisions for developing a competitive and sustainable organization. Companies have to consider supplier related risks and threats in their purchasing decisions. In today’s competitive and risky business environment, it is very important to work with reliable suppliers. This study proposes a clustering based approach to group suppliers based on their risk profile. Suppliers of a company in the heavy-machinery sector are assessed based on 17 qualitative and quantitative risk types. The weights of the criteria are determined by using the Best-Worst method. Four factors are extracted by applying Factor Analysis to the supplier risk data. Then k-means clustering algorithm is applied to group core suppliers of the company based on the four risk factors. Three clusters are created with different risk exposure levels. The interpretation of the results provides insights for risk management actions and supplier development programs to mitigate supplier risk.

  3. RISK LOAN PORTFOLIO OPTIMIZATION MODEL BASED ON CVAR RISK MEASURE

    Directory of Open Access Journals (Sweden)

    Ming-Chang LEE

    2015-07-01

    Full Text Available In order to achieve commercial banks liquidity, safety and profitability objective requirements, loan portfolio risk analysis based optimization decisions are rational allocation of assets.  The risk analysis and asset allocation are the key technology of banking and risk management.  The aim of this paper, build a loan portfolio optimization model based on risk analysis.  Loan portfolio rate of return by using Value-at-Risk (VaR and Conditional Value-at-Risk (CVaR constraint optimization decision model reflects the bank's risk tolerance, and the potential loss of direct control of the bank.  In this paper, it analyze a general risk management model applied to portfolio problems with VaR and CVaR risk measures by using Using the Lagrangian Algorithm.  This paper solves the highly difficult problem by matrix operation method.  Therefore, the combination of this paper is easy understanding the portfolio problems with VaR and CVaR risk model is a hyperbola in mean-standard deviation space.  It is easy calculation in proposed method.

  4. Urban flooding and health risk analysis by use of quantitative microbial risk assessment

    DEFF Research Database (Denmark)

    Andersen, Signe Tanja

    D thesis is to identify the limitations and possibilities for optimising microbial risk assessments of urban flooding through more evidence-based solutions, including quantitative microbial data and hydrodynamic water quality models. The focus falls especially on the problem of data needs and the causes......, but also when wading through a flooded area. The results in this thesis have brought microbial risk assessments one step closer to more uniform and repeatable risk analysis by using actual and relevant measured data and hydrodynamic water quality models to estimate the risk from flooding caused...... are expected to increase in the future. To ensure public health during extreme rainfall, solutions are needed, but limited knowledge on microbial water quality, and related health risks, makes it difficult to implement microbial risk analysis as a part of the basis for decision making. The main aim of this Ph...

  5. Why Map Issues? On Controversy Analysis as a Digital Method.

    Science.gov (United States)

    Marres, Noortje

    2015-09-01

    This article takes stock of recent efforts to implement controversy analysis as a digital method in the study of science, technology, and society (STS) and beyond and outlines a distinctive approach to address the problem of digital bias. Digital media technologies exert significant influence on the enactment of controversy in online settings, and this risks undermining the substantive focus of controversy analysis conducted by digital means. To address this problem, I propose a shift in thematic focus from controversy analysis to issue mapping. The article begins by distinguishing between three broad frameworks that currently guide the development of controversy analysis as a digital method, namely, demarcationist, discursive, and empiricist. Each has been adopted in STS, but only the last one offers a digital "move beyond impartiality." I demonstrate this approach by analyzing issues of Internet governance with the aid of the social media platform Twitter.

  6. Freight-train derailment rates for railroad safety and risk analysis.

    Science.gov (United States)

    Liu, Xiang; Rapik Saat, M; Barkan, Christopher P L

    2017-01-01

    Derailments are the most common type of train accident in the United States. They cause damage to infrastructure, rolling stock and lading, disrupt service, and have the potential to cause casualties, and harm the environment. Train safety and risk analysis relies on accurate assessment of derailment likelihood. Derailment rate - the number of derailments normalized by traffic exposure - is a useful statistic to estimate the likelihood of a derailment. Despite its importance, derailment rate analysis using multiple factors has not been previously developed. In this paper, we present an analysis of derailment rates on Class I railroad mainlines based on data from the U.S. Federal Railroad Administration and the major freight railroads. The point estimator and confidence interval of train and car derailment rates are developed by FRA track class, method of operation and annual traffic density. The analysis shows that signaled track with higher FRA track class and higher traffic density is associated with a lower derailment rate. The new accident rates have important implications for safety and risk management decisions, such as the routing of hazardous materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Deciding which chemical mixtures risk assessment methods work best for what mixtures

    International Nuclear Information System (INIS)

    Teuschler, Linda K.

    2007-01-01

    The most commonly used chemical mixtures risk assessment methods involve simple notions of additivity and toxicological similarity. Newer methods are emerging in response to the complexities of chemical mixture exposures and effects. Factors based on both science and policy drive decisions regarding whether to conduct a chemical mixtures risk assessment and, if so, which methods to employ. Scientific considerations are based on positive evidence of joint toxic action, elevated human exposure conditions or the potential for significant impacts on human health. Policy issues include legislative drivers that may mandate action even though adequate toxicity data on a specific mixture may not be available and risk assessment goals that impact the choice of risk assessment method to obtain the amount of health protection desired. This paper discusses three important concepts used to choose among available approaches for conducting a chemical mixtures risk assessment: (1) additive joint toxic action of mixture components; (2) toxicological interactions of mixture components; and (3) chemical composition of complex mixtures. It is proposed that scientific support for basic assumptions used in chemical mixtures risk assessment should be developed by expert panels, risk assessment methods experts, and laboratory toxicologists. This is imperative to further develop and refine quantitative methods and provide guidance on their appropriate applications. Risk assessors need scientific support for chemical mixtures risk assessment methods in the form of toxicological data on joint toxic action for high priority mixtures, statistical methods for analyzing dose-response for mixtures, and toxicological and statistical criteria for determining sufficient similarity of complex mixtures

  8. Understanding common risk analysis problems leads to better E and P decisions

    International Nuclear Information System (INIS)

    Smith, M.B.

    1994-01-01

    Many petroleum geologists, engineers and managers who have been introduced to petroleum risk analysis doubt that probability theory actually works in practice. Discovery probability estimates for exploration prospects always seem to be more optimistic than after-the-fact results. In general, probability estimates seem to be plucked from the air without any objective basis. Because of subtleties in probability theories, errors may result in applying risk analysis to real problems. Four examples have been selected to illustrate how misunderstanding in applying risk analysis may lead to incorrect decisions. Examples 1 and 2 show how falsely assuming statistical independence distorts probability calculations. Example 1 and 2 show how falsely assuming statistical independence distorts probability calculations. Example 3 discusses problems with related variable using the Monte Carlo method. Example 4 shows how subsurface data yields a probability value that is superior to a simple statistical estimate. The potential mistakes in the following examples would go unnoticed in analyses in most companies. Lack of objectivity and flawed theory would be blamed when fault actually would lies with incorrect application of basic probability principles

  9. Risk Analysis on Leakage Failure of Natural Gas Pipelines by Fuzzy Bayesian Network with a Bow-Tie Model

    OpenAIRE

    Shan, Xian; Liu, Kang; Sun, Pei-Liang

    2017-01-01

    Pipeline is the major mode of natural gas transportation. Leakage of natural gas pipelines may cause explosions and fires, resulting in casualties, environmental damage, and material loss. Efficient risk analysis is of great significance for preventing and mitigating such potential accidents. The objective of this study is to present a practical risk assessment method based on Bow-tie model and Bayesian network for risk analysis of natural gas pipeline leakage. Firstly, identify the potential...

  10. A resilience perspective to water risk management: case-study application of the adaptation tipping point method

    Science.gov (United States)

    Gersonius, Berry; Ashley, Richard; Jeuken, Ad; Nasruddin, Fauzy; Pathirana, Assela; Zevenbergen, Chris

    2010-05-01

    start the identification and analysis of adaptive strategies at the end of PSIR scheme: impact and examine whether, and for how long, current risk management strategies will continue to be effective under different future conditions. The most noteworthy application of this approach is the adaptation tipping point method. Adaptation tipping points (ATP) are defined as the points where the magnitude of change is such that the current risk management strategy can no longer meet its objectives. In the ATP method, policy objectives, determining aspirational functioning, are taken as the starting point. Also, the current measures to achieve these objectives are described. This is followed by a sensitivity analysis to determine the optimal and critical boundary conditions (state). Lastly, the state is related to pressures in terms of future change. It should be noted that in the ATP method the driver for adopting a new risk management strategy is not future change as such, but rather failing to meet the policy objectives. In the current paper, the ATP method is applied to the case study of an existing stormwater system in Dordrecht (the Netherlands). This application shows the potential of the ATP method to reduce the complexity of implementing a resilience-focused approach to water risk management. It is expected that this will help foster greater practical relevance of resilience as a perspective for the planning of water management structures.

  11. 12 CFR 327.9 - Assessment risk categories and pricing methods.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Assessment risk categories and pricing methods... OF GENERAL POLICY ASSESSMENTS In General § 327.9 Assessment risk categories and pricing methods. (a... and a weighted average of CAMELS component ratings will be multiplied by a corresponding pricing...

  12. Risks: diagnosing and eliminating

    Directory of Open Access Journals (Sweden)

    Yuriy A. Tikhomirov

    2016-01-01

    Full Text Available Objective to develop conceptual theoretical and legal provisions and scientific recommendations on the identification analysis and elimination of risk. Methods universal dialectic method of cognition as well as scientific and private research methods based on it. Results the system was researched of risks diagnostics in the legal sphere and mechanism of influencing the quotrisk situationsquot and their consequences damage to the environment and harm to society. The concept of risk in the legal sphere was formulated the author39s classification of risks in the legal sphere is presented. The rules of analysis evaluation and prevention of risks and the model risk management framework are elaborated. Scientific novelty the mechanism for the identification analysis and elimination of risk has been developed and introduced into scientific circulation the author has proposed the classification and types of risks the reasons and the conditions promoting the risk occurrence. Practical significance the provisions and conclusions of the article can be used in the scientific lawmaking and lawenforcement activity as well as in the educational process of higher educational establishments. nbsp

  13. Risk Analysis for Unintentional Slide Deployment During Airline Operations.

    Science.gov (United States)

    Ayra, Eduardo S; Insua, David Ríos; Castellanos, María Eugenia; Larbi, Lydia

    2015-09-01

    We present a risk analysis undertaken to mitigate problems in relation to the unintended deployment of slides under normal operations within a commercial airline. This type of incident entails relevant costs for the airline industry. After assessing the likelihood and severity of its consequences, we conclude that such risks need to be managed. We then evaluate the effectiveness of various countermeasures, describing and justifying the chosen ones. We also discuss several issues faced when implementing and communicating the proposed measures, thus fully illustrating the risk analysis process. © 2015 Society for Risk Analysis.

  14. Economic analysis of alternative LLW disposal methods

    International Nuclear Information System (INIS)

    Foutes, C.E.; Queenan, C.J. III

    1987-01-01

    The Environmental Protection Agency (EPA) has evaluated the costs and benefits of alternative disposal technologies as part of its program to develop generally applicable environmental standards for the land disposal of low-level radioactive waste (LLW). Costs, population health effects and Critical Population Group (CPG) exposures resulting from alternative waste treatment and disposal methods were evaluated both in absolute terms and also relative to a base case (current practice). Incremental costs of the standard included costs for packaging, processing, transportation, and burial of waste. Benefits are defined in terms of reductions in the general population health risk (expected fatal cancers and genetic effects) evaluated over 10,000 years. A cost-effectiveness ratio, defined as the incremental cost per avoided health effect, was calculated for each alternative standard. The cost-effectiveness analysis took into account a number of waste streams, hydrogeologic and climatic region settings, and waste treatment and disposal methods. This paper describes the alternatives considered and preliminary results of the cost-effectiveness analysis. 15 references, 7 figures, 3 tables

  15. A Comparative Analysis of Value at Risk Measurement on Emerging Stock Markets: Case of Montenegro

    Directory of Open Access Journals (Sweden)

    Cerović Julija

    2015-03-01

    Full Text Available Background: The concept of value at risk gives estimation of the maximum loss of financial position at a given time for a given probability. The motivation for this analysis lies in the desire to devote necessary attention to risks in Montenegro, and to approach to quantifying and managing risk more thoroughly. Objectives: This paper considers adequacy of the most recent approaches for quantifying market risk, especially of methods that are in the basis of extreme value theory, in Montenegrin emerging market before and during the global financial crisis. In particular, the purpose of the paper is to investigate whether extreme value theory outperforms econometric and quantile evaluation of VaR in emerging stock markets such as Montenegrin market. Methods/Approach: Daily return of Montenegrin stock market index MONEX20 is analyzed for the period January, 2004 - February, 2014. Value at Risk results based on GARCH models, quantile estimation and extreme value theory are compared. Results: Results of the empirical analysis show that the assessments of Value at Risk based on extreme value theory outperform econometric and quantile evaluations. Conclusions: It is obvious that econometric evaluations (ARMA(2,0- GARCH(1,1 and RiskMetrics proved to be on the lower bound of possible Value at Risk movements. Risk estimation on emerging markets can be focused on methodology using extreme value theory that is more sophisticated as it has been proven to be the most cautious model when dealing with turbulent times and financial turmoil.

  16. Mare Risk Analysis monitor

    International Nuclear Information System (INIS)

    Fuente Prieto, I.; Alonso, P.; Carretero Fernandino, J. A.

    2000-01-01

    The Nuclear Safety Council's requirement that Spanish power plants comply with the requirements of the Maintenance Rule associated with plant risk assessment during power operation, arising from the partial unavailability of systems due to the maintenance activities, has led to need for additional tools to facilitate compliance with said requirements. While the impact on risk produced by individual equipment unavailabilities can easily be evaluated, either qualitatively or quantitatively, the process becomes more complicated when un programmed unavailabilities simultaneously occur in various systems, making it necessary to evaluate their functional impact. It is especially complex in the case of support systems that can affect the functionality of multiple systems. In view of the above, a computer application has been developed that is capable of providing the operator with quick answers based on the specific plant model in order to allow fast risk assessment using the information compiled as part of the Probabilistic Safety Analysis. The paper describes the most important characteristics of this application and the basic design requirements of the MARE Risk Monitor. (Author)

  17. Methods of assessment and management of enterprise risks

    Directory of Open Access Journals (Sweden)

    I. A. Kiseleva

    2017-01-01

    Full Text Available The article is devoted to the actual topic of our time – the management of business risks. An integral part of professional risk management is to identify the nature of the object of management in the sphere of economy. Since the domestic theory of risk management is under development, the problem of a clear comprehensive definition of risk becomes now of particular relevance. The article discusses the basic concepts of risk management; studied its components in the business activities; reflected system and risk management principles; The basic types of risks in business. A organizational and economic mechanism of enterprise risk assessment. Practical advice on risk management. Entrepreneurship without risk does not exist. With the development of market economy the specific entrepreneur determines the methods that will work, and they all lead to entrepreneurial risks. The level of threats on the market today, above the level of potential profits. It is concluded that it is impossible to increase revenue without increasing the risk or reduce risk without reducing income. The lower range of the probability distribution of expected returns relative to its mean value, the lower the risk associated with this operation. Avoid risk in business is almost impossible, but you can reduce this risk. And it depends on how professionally and correctly operates the entrepreneur, what kind of strategy he will choose to reduce the appearance of risk.

  18. Uncertainty analysis in vulnerability estimations for elements at risk- a review of concepts and some examples on landslides

    Science.gov (United States)

    Ciurean, R. L.; Glade, T.

    2012-04-01

    Decision under uncertainty is a constant of everyday life and an important component of risk management and governance. Recently, experts have emphasized the importance of quantifying uncertainty in all phases of landslide risk analysis. Due to its multi-dimensional and dynamic nature, (physical) vulnerability is inherently complex and the "degree of loss" estimates imprecise and to some extent even subjective. Uncertainty analysis introduces quantitative modeling approaches that allow for a more explicitly objective output, improving the risk management process as well as enhancing communication between various stakeholders for better risk governance. This study presents a review of concepts for uncertainty analysis in vulnerability of elements at risk to landslides. Different semi-quantitative and quantitative methods are compared based on their feasibility in real-world situations, hazard dependency, process stage in vulnerability assessment (i.e. input data, model, output), and applicability within an integrated landslide hazard and risk framework. The resulted observations will help to identify current gaps and future needs in vulnerability assessment, including estimation of uncertainty propagation, transferability of the methods, development of visualization tools, but also address basic questions like what is uncertainty and how uncertainty can be quantified or treated in a reliable and reproducible way.

  19. A method for risk informing procedures at operating nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, P. F.; Martin del Campo, C., E-mail: pnelson_007@yahoo.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)

    2012-10-15

    The technical approach presented establishes a framework intended to provide the necessary elements for a deployable human performance monitoring program that incorporates insights from plant specific probabilistic risk assessments, human reliability analysis, as well as the development of plant specific human failure data. A human performance monitoring program of this structure would be used to provide the ability to risk inform procedures (e.g., operations or maintenance) to determine the operational risk significance of procedural performance (i.e., precautions, prerequisites, procedure steps), the likelihood of consequential human error dur the performance of the procedure, and the identification of procedure specific barriers to reduce or eliminate consequential human errors. The program would provide the means to assess procedures prior to execution and the means to record and trend human failure events leading to a plant specific human failure database for human activities characterized as pre-initiator. The technical methods and data processing for each of these areas are developed and presented, as well as an example application of an operational procedure error leading to a plant level event (i.e, plant trip). (Author)

  20. Cost Risk Analysis Based on Perception of the Engineering Process

    Science.gov (United States)

    Dean, Edwin B.; Wood, Darrell A.; Moore, Arlene A.; Bogart, Edward H.

    1986-01-01

    In most cost estimating applications at the NASA Langley Research Center (LaRC), it is desirable to present predicted cost as a range of possible costs rather than a single predicted cost. A cost risk analysis generates a range of cost for a project and assigns a probability level to each cost value in the range. Constructing a cost risk curve requires a good estimate of the expected cost of a project. It must also include a good estimate of expected variance of the cost. Many cost risk analyses are based upon an expert's knowledge of the cost of similar projects in the past. In a common scenario, a manager or engineer, asked to estimate the cost of a project in his area of expertise, will gather historical cost data from a similar completed project. The cost of the completed project is adjusted using the perceived technical and economic differences between the two projects. This allows errors from at least three sources. The historical cost data may be in error by some unknown amount. The managers' evaluation of the new project and its similarity to the old project may be in error. The factors used to adjust the cost of the old project may not correctly reflect the differences. Some risk analyses are based on untested hypotheses about the form of the statistical distribution that underlies the distribution of possible cost. The usual problem is not just to come up with an estimate of the cost of a project, but to predict the range of values into which the cost may fall and with what level of confidence the prediction is made. Risk analysis techniques that assume the shape of the underlying cost distribution and derive the risk curve from a single estimate plus and minus some amount usually fail to take into account the actual magnitude of the uncertainty in cost due to technical factors in the project itself. This paper addresses a cost risk method that is based on parametric estimates of the technical factors involved in the project being costed. The engineering

  1. Preliminary study of elemental analysis of hydroxyapatite used neutron activation analysis method

    International Nuclear Information System (INIS)

    Yustinus Purwamargapratala; Rina Mulyaningsih

    2010-01-01

    Preliminary study has been carried out elemental analysis of hydroxyapatite synthesized using the method of neutron activation analysis. Hydroxyapatite is the main component constituent of bones and teeth which can be synthesized from limestone and phosphoric acid. Hydroxyapatite can be used as a bone substitute material and human and animal teeth. Tests on the metal content is necessary to prevent the risk of damage to bones and teeth due to contamination. Results of analysis using neutron activation analysis method with samples irradiated at the neutron flux 10"3 n.det"-"1cm"-"2 for one minute, the impurities of Al (48.60±6.47 mg/kg), CI (38.00±7.47 mg/kg), Mn (1.05±0.19 mg/kg), and Mg (2095.30±203.66 mg/kg), were detected, whereas with irradiation time for 10 minutes and 40 minutes with a time decay of three days there were K (103.89 ± 26.82 mg/kg), Br (1617.06 ± 193.66 mg/kg), and Na (125.10±9.57 mg/kg). These results indicate that there is impurity Al, CI, Mn, Mg, Br, K and Na, although in very small amounts and do not cause damage to bones and teeth. (author)

  2. A Regional Decision Support Scheme for Pest Risk Analysis in Southeast Asia.

    Science.gov (United States)

    Soliman, T; MacLeod, A; Mumford, J D; Nghiem, T P L; Tan, H T W; Papworth, S K; Corlett, R T; Carrasco, L R

    2016-05-01

    A key justification to support plant health regulations is the ability of quarantine services to conduct pest risk analyses (PRA). Despite the supranational nature of biological invasions and the close proximity and connectivity of Southeast Asian countries, PRAs are conducted at the national level. Furthermore, some countries have limited experience in the development of PRAs, which may result in inadequate phytosanitary responses that put their plant resources at risk to pests vectored via international trade. We review existing decision support schemes for PRAs and, following international standards for phytosanitary measures, propose new methods that adapt existing practices to suit the unique characteristics of Southeast Asia. Using a formal written expert elicitation survey, a panel of regional scientific experts was asked to identify and rate unique traits of Southeast Asia with respect to PRA. Subsequently, an expert elicitation workshop with plant protection officials was conducted to verify the potential applicability of the developed methods. Rich biodiversity, shortage of trained personnel, social vulnerability, tropical climate, agriculture-dependent economies, high rates of land-use change, and difficulties in implementing risk management options were identified as challenging Southeast Asian traits. The developed methods emphasize local Southeast Asian conditions and could help support authorities responsible for carrying out PRAs within the region. These methods could also facilitate the creation of other PRA schemes in low- and middle-income tropical countries. © 2016 Society for Risk Analysis.

  3. On the validation of risk analysis-A commentary

    International Nuclear Information System (INIS)

    Rosqvist, Tony

    2010-01-01

    Aven and Heide (2009) [1] provided interesting views on the reliability and validation of risk analysis. The four validation criteria presented are contrasted with modelling features related to the relative frequency-based and Bayesian approaches to risk analysis. In this commentary I would like to bring forth some issues on validation that partly confirm and partly suggest changes in the interpretation of the introduced validation criteria-especially, in the context of low probability-high consequence systems. The mental model of an expert in assessing probabilities is argued to be a key notion in understanding the validation of a risk analysis.

  4. Development of A Standard Method for Human Reliability Analysis (HRA) of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kang, Dae Il; Jung, Won Dea; Kim, Jae Whan

    2005-12-01

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME and ANS PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME and ANS HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method

  5. Development of A Standard Method for Human Reliability Analysis (HRA) of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dae Il; Jung, Won Dea; Kim, Jae Whan

    2005-12-15

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME and ANS PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME and ANS HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method.

  6. Screening, sensitivity, and uncertainty for the CREAM method of Human Reliability Analysis

    International Nuclear Information System (INIS)

    Bedford, Tim; Bayley, Clare; Revie, Matthew

    2013-01-01

    This paper reports a sensitivity analysis of the Cognitive Reliability and Error Analysis Method for Human Reliability Analysis. We consider three different aspects: the difference between the outputs of the Basic and Extended methods, on the same HRA scenario; the variability in outputs through the choices made for common performance conditions (CPCs); and the variability in outputs through the assignment of choices for cognitive function failures (CFFs). We discuss the problem of interpreting categories when applying the method, compare its quantitative structure to that of first generation methods and discuss also how dependence is modelled with the approach. We show that the control mode intervals used in the Basic method are too narrow to be consistent with the Extended method. This motivates a new screening method that gives improved accuracy with respect to the Basic method, in the sense that (on average) halves the uncertainty associated with the Basic method. We make some observations on the design of a screening method that are generally applicable in Risk Analysis. Finally, we propose a new method of combining CPC weights with nominal probabilities so that the calculated probabilities are always in range (i.e. between 0 and 1), while satisfying sensible properties that are consistent with the overall CREAM method

  7. A Western Dietary Pattern Increases Prostate Cancer Risk: A Systematic Review and Meta-Analysis.

    Science.gov (United States)

    Fabiani, Roberto; Minelli, Liliana; Bertarelli, Gaia; Bacci, Silvia

    2016-10-12

    Dietary patterns were recently applied to examine the relationship between eating habits and prostate cancer (PC) risk. While the associations between PC risk with the glycemic index and Mediterranean score have been reviewed, no meta-analysis is currently available on dietary patterns defined by "a posteriori" methods. A literature search was carried out (PubMed, Web of Science) to identify studies reporting the relationship between dietary patterns and PC risk. Relevant dietary patterns were selected and the risks estimated were calculated by a random-effect model. Multivariable-adjusted odds ratios (ORs), for a first-percentile increase in dietary pattern score, were combined by a dose-response meta-analysis. Twelve observational studies were included in the meta-analysis which identified a "Healthy pattern" and a "Western pattern". The Healthy pattern was not related to PC risk (OR = 0.96; 95% confidence interval (CI): 0.88-1.04) while the Western pattern significantly increased it (OR = 1.34; 95% CI: 1.08-1.65). In addition, the "Carbohydrate pattern", which was analyzed in four articles, was positively associated with a higher PC risk (OR = 1.64; 95% CI: 1.35-2.00). A significant linear trend between the Western ( p = 0.011) pattern, the Carbohydrate ( p = 0.005) pattern, and the increment of PC risk was observed. The small number of studies included in the meta-analysis suggests that further investigation is necessary to support these findings.

  8. Risk of postpartum relapse in bipolar disorder and postpartum psychosis : A systematic review and meta-analysis

    NARCIS (Netherlands)

    Wesseloo, R.; Kamperman, A.M.; Munk-Olsen, T.; Pop, V.J.M.; Kushner, S.A.; Bergink, V.

    2016-01-01

    Objective: Women with a history of bipolar disorder, postpartum psychosis, or both are at high risk for postpartum relapse. The aim of this meta-analysis was to estimate the risk of postpartum relapse in these three patient groups. Method: A systematic literature search was conducted in all public

  9. A METEOROLOGICAL RISK ASSESSMENT METHOD FOR POWER LINES BASED ON GIS AND MULTI-SENSOR INTEGRATION

    Directory of Open Access Journals (Sweden)

    Z. Lin

    2016-06-01

    Full Text Available Power lines, exposed in the natural environment, are vulnerable to various kinds of meteorological factors. Traditional research mainly deals with the influence of a single meteorological condition on the power line, which lacks of comprehensive effects evaluation and analysis of the multiple meteorological factors. In this paper, we use multiple meteorological monitoring data obtained by multi-sensors to implement the meteorological risk assessment and early warning of power lines. Firstly, we generate meteorological raster map from discrete meteorological monitoring data using spatial interpolation. Secondly, the expert scoring based analytic hierarchy process is used to compute the power line risk index of all kinds of meteorological conditions and establish the mathematical model of meteorological risk. By adopting this model in raster calculator of ArcGIS, we will have a raster map showing overall meteorological risks for power line. Finally, by overlaying the power line buffer layer to that raster map, we will get to know the exact risk index around a certain part of power line, which will provide significant guidance for power line risk management. In the experiment, based on five kinds of observation data gathered from meteorological stations in Guizhou Province of China, including wind, lightning, rain, ice, temperature, we carry on the meteorological risk analysis for the real power lines, and experimental results have proved the feasibility and validity of our proposed method.

  10. Empirical analysis on future-cash arbitrage risk with portfolio VaR

    Science.gov (United States)

    Chen, Rongda; Li, Cong; Wang, Weijin; Wang, Ze

    2014-03-01

    This paper constructs the positive arbitrage position by alternating the spot index with Chinese Exchange Traded Fund (ETF) portfolio and estimating the arbitrage-free interval of futures with the latest trade data. Then, an improved Delta-normal method was used, which replaces the simple linear correlation coefficient with tail dependence correlation coefficient, to measure VaR (Value-at-risk) of the arbitrage position. Analysis of VaR implies that the risk of future-cash arbitrage is less than that of investing completely in either futures or spot market. Then according to the compositional VaR and the marginal VaR, we should increase the futures position and decrease the spot position appropriately to minimize the VaR, which can minimize risk subject to certain revenues.

  11. A scenario-driven approach for value, risk and cost analysis in system architecting for innovation

    NARCIS (Netherlands)

    Ionita, M.T.; America, P.H.M.; Hammer, D.K.; Obbink, J.H.; Trienekens, J.J.M.; Magee, J.; Szyperski, C.; Bosch, J.

    2004-01-01

    We present a quantitative method for scenario-driven value, risk, and cost analysis when proposing new system architectures for innovation projects. The method helps to articulate the relative benefits and/or disadvantages of the proposed set of scenarios in the early architecting phases of a new

  12. Stratospheric Aerosol and Gas Experiment, SAGE III on ISS, An Earth Science Mission on the International Space Station, Schedule Risk Analysis, A Project Perspective

    Science.gov (United States)

    Bonine, Lauren

    2015-01-01

    The presentation provides insight into the schedule risk analysis process used by the Stratospheric Aerosol and Gas Experiment III on the International Space Station Project. The presentation focuses on the schedule risk analysis process highlighting the methods for identification of risk inputs, the inclusion of generic risks identified outside the traditional continuous risk management process, and the development of tailored analysis products used to improve risk informed decision making.

  13. Alternative Testing Strategies for Nanomaterials: State of the Science and Considerations for Risk Analysis.

    Science.gov (United States)

    Shatkin, J A; Ong, K J

    2016-08-01

    The rapid growth of the nanotechnology industry has warranted equal progress in the nanotoxicology and risk assessment fields. In vivo models have traditionally been used to determine human and environmental risk for chemicals; however, the use of these tests has limitations, and there are global appeals to develop reliable alternatives to animal testing. Many have investigated the use of alternative (nonanimal) testing methods and strategies have quickly developed and resulted in the generation of large toxicological data sets for numerous nanomaterials (NMs). Due to the novel physicochemical properties of NMs that are related to surface characteristics, the approach toward toxicity test development has distinct considerations from traditional chemicals, bringing new requirements for adapting these approaches for NMs. The methodical development of strategies that combine multiple alternative tests can be useful for predictive NM risk assessment and help screening-level decision making. This article provides an overview of the main developments in alternative methods and strategies for reducing uncertainty in NM risk assessment, including advantages and disadvantages of in vitro, ex vivo, and in silico methods, and examples of existing comprehensive strategies. In addition, knowledge gaps are identified toward improvements for experimental and strategy design, specifically highlighting the need to represent realistic exposure scenarios and to consider NM-specific concerns such as characterization, assay interferences, and standardization. Overall, this article aims to improve the reliability and utility of alternative testing methods and strategies for risk assessment of manufactured NMs. © 2016 Society for Risk Analysis.

  14. A review of cyber security risk assessment methods for SCADA systems

    OpenAIRE

    Cherdantseva, Yulia; Burnap, Peter; Blyth, Andrew; Eden, Peter; Jones, Kevin; Soulsby, Hugh; Stoddart, Kristan

    2016-01-01

    This paper reviews the state of the art in cyber security risk assessment of Supervisory Control and Data Acquisition (SCADA) systems. We select and in-detail examine twenty-four risk assessment methods developed for or applied in the context of a SCADA system. We describe the essence of the methods and then analyse them in terms of aim; application domain; the stages of risk management addressed; key risk management concepts covered; impact measurement; sources of probabilistic data; evaluat...

  15. Climate Risk Informed Decision Analysis: A Hypothetical Application to the Waas Region

    Science.gov (United States)

    Gilroy, Kristin; Mens, Marjolein; Haasnoot, Marjolijn; Jeuken, Ad

    2016-04-01

    More frequent and intense hydrologic events under climate change are expected to enhance water security and flood risk management challenges worldwide. Traditional planning approaches must be adapted to address climate change and develop solutions with an appropriate level of robustness and flexibility. The Climate Risk Informed Decision Analysis (CRIDA) method is a novel planning approach embodying a suite of complementary methods, including decision scaling and adaptation pathways. Decision scaling offers a bottom-up approach to assess risk and tailors the complexity of the analysis to the problem at hand and the available capacity. Through adaptation pathway,s an array of future strategies towards climate robustness are developed, ranging in flexibility and immediacy of investments. Flexible pathways include transfer points to other strategies to ensure that the system can be adapted if future conditions vary from those expected. CRIDA combines these two approaches in a stakeholder driven process which guides decision makers through the planning and decision process, taking into account how the confidence in the available science, the consequences in the system, and the capacity of institutions should influence strategy selection. In this presentation, we will explain the CRIDA method and compare it to existing planning processes, such as the US Army Corps of Engineers Principles and Guidelines as well as Integrated Water Resources Management Planning. Then, we will apply the approach to a hypothetical case study for the Waas Region, a large downstream river basin facing rapid development threatened by increased flood risks. Through the case study, we will demonstrate how a stakeholder driven process can be used to evaluate system robustness to climate change; develop adaptation pathways for multiple objectives and criteria; and illustrate how varying levels of confidence, consequences, and capacity would play a role in the decision making process, specifically

  16. [COMPUTER TECHNOLOGY FOR ACCOUNTING OF CONFOUNDERS IN THE RISK ASSESSMENT IN COMPARATIVE STUDIES ON THE BASE OF THE METHOD OF STANDARDIZATION].

    Science.gov (United States)

    Shalaumova, Yu V; Varaksin, A N; Panov, V G

    2016-01-01

    There was performed an analysis of the accounting of the impact of concomitant variables (confounders), introducing a systematic error in the assessment of the impact of risk factors on the resulting variable. The analysis showed that standardization is an effective method for the reduction of the shift of risk assessment. In the work there is suggested an algorithm implementing the method of standardization based on stratification, providing for the minimization of the difference of distributions of confounders in groups on risk factors. To automate the standardization procedures there was developed a software available on the website of the Institute of Industrial Ecology, UB RAS. With the help of the developed software by numerically modeling there were determined conditions of the applicability of the method of standardization on the basis of stratification for the case of the normal distribution on the response and confounder and linear relationship between them. Comparison ofresults obtained with the help of the standardization with statistical methods (logistic regression and analysis of covariance) in solving the problem of human ecology, has shown that obtaining close results is possible if there will be met exactly conditions for the applicability of statistical methods. Standardization is less sensitive to violations of conditions of applicability.

  17. Risk analysis of industrial plants operation

    International Nuclear Information System (INIS)

    Hubert, Philippe

    1989-12-01

    This study examines the possibilities of systematic technology risk analysis in view of territorial management (city, urban community, region), including chronic and accidental risks. The objective was to relate this evaluation with those done for permanent water and air pollution. Risk management for pollution are done for a long time. A number of studies were done in urban communities and regions both for air and water pollution. The second objective is related to management of industrial risks: nuclear, petrochemical, transport of hazardous material, pipelines, etc. At the beginning, three possibilities of effects are taken into account: human health, economic aspect and water, and possibilities of evaluation are identified. Elements of risk identification are presented for quantification of results [fr

  18. ANALYSIS OF ROMANIAN SMALL AND MEDIUM ENTERPRISES BANKRUPTCY RISK

    Directory of Open Access Journals (Sweden)

    Kulcsar Edina

    2014-07-01

    Full Text Available Considering the fundamental role of small and medium enterprises in Romanian economy, this paper aims to quantify the level of their bankruptcy risk for 2009 and 2012 period, after debuting of financial crisis. The main reason of selecting this type of companies is that they represent the backbone of national economy. They have an indispensable role, because they offer jobs for great part of population and their contribution for GDP stimulation is considerable. In this paper it was applied two default risk models, namely the well known Altman’s Z-score model, based on five financial ratios and a bankruptcy predictor model developed by Teti et. al (2012 used firstly exclusively for Italian small and medium-sized enterprise for 2006-2009 period. The model proposed by Teti et. is based on the investigation of financially distressed and financially non-distressed Italian small and medium-sized enterprises during the financial crisis by using a discriminant analysis model. They conclude that there are four financial ratios, which characterized well the small and medium-sized enterprises bankruptcy risk. These variables are financial ratios, like: Debt/Total Assets, Return on Sales (ROS, EBIT/Interest Expenses and Working capital/EBIDTA. They consider that small and medium-sized enterprises require a particular approach in terms of bankruptcy risk analysis. In present study I try to compare the efficiency of traditional bankruptcy risk model with a small and medium-sized specific model. The necessary database for present analysis is ensured by simplified financial reports of 120 small and medium-sized enterprises registered in Bihor County. The selected enterprises are operating in manufacturing industry (21,67% and trading (78,33%. Present investigation has an important value in actual economic background, where the healthiness and sustainability of small and medium-sized enterprises is a great issue. The results of study shows contradictory

  19. Risk assessment of the emergency processes: Healthcare failure mode and effect analysis.

    Science.gov (United States)

    Taleghani, Yasamin Molavi; Rezaei, Fatemeh; Sheikhbardsiri, Hojat

    2016-01-01

    Ensuring about the patient's safety is the first vital step in improving the quality of care and the emergency ward is known as a high-risk area in treatment health care. The present study was conducted to evaluate the selected risk processes of emergency surgery department of a treatment-educational Qaem center in Mashhad by using analysis method of the conditions and failure effects in health care. In this study, in combination (qualitative action research and quantitative cross-sectional), failure modes and effects of 5 high-risk procedures of the emergency surgery department were identified and analyzed according to Healthcare Failure Mode and Effects Analysis (HFMEA). To classify the failure modes from the "nursing errors in clinical management model (NECM)", the classification of the effective causes of error from "Eindhoven model" and determination of the strategies to improve from the "theory of solving problem by an inventive method" were used. To analyze the quantitative data of descriptive statistics (total points) and to analyze the qualitative data, content analysis and agreement of comments of the members were used. In 5 selected processes by "voting method using rating", 23 steps, 61 sub-processes and 217 potential failure modes were identified by HFMEA. 25 (11.5%) failure modes as the high risk errors were detected and transferred to the decision tree. The most and the least failure modes were placed in the categories of care errors (54.7%) and knowledge and skill (9.5%), respectively. Also, 29.4% of preventive measures were in the category of human resource management strategy. "Revision and re-engineering of processes", "continuous monitoring of the works", "preparation and revision of operating procedures and policies", "developing the criteria for evaluating the performance of the personnel", "designing a suitable educational content for needs of employee", "training patients", "reducing the workload and power shortage", "improving team

  20. Assessing environmental risks for high intensity agriculture using the material flow analysis method--a case study of the Dongting Lake basin in South Central China.

    Science.gov (United States)

    Yin, Guanyi; Liu, Liming; Yuan, Chengcheng

    2015-07-01

    This study primarily examined the assessment of environmental risk in high intensity agricultural areas. Dongting Lake basin was taken as a case study, which is one of the major grain producing areas in China. Using data obtained from 1989 to 2012, we applied Material Flow Analysis (MFA) to show the material consumption, pollutant output and production storage in the agricultural-environmental system and assessed the environmental risk index on the basis of the MFA results. The results predicted that the status of the environmental quality of the Dongting Lake area is unsatisfactory for the foreseeable future. The direct material input (DMI) declined by 13.9%, the domestic processed output (DPO) increased by 28.21%, the intensity of material consumption (IMC) decreased by 36.7%, the intensity of material discharge (IMD) increased by 10%, the material productivity (MP) increased by 27 times, the environmental efficiency (EE) increased by 15.31 times, and the material storage (PAS) increased by 0.23%. The DMI and DPO was higher at rural places on the edge of cities, whereas the risk of urban agriculture has arisen due to the higher increasing rate of DMI and DPO in cities compared with the counties. The composite environmental risk index increased from 0.33 to 0.96, indicating that the total environmental risk changed gradually but seriously during the 24 years assessed. The driving factors that affect environmental risk in high intensity agriculture can be divided into five classes: social, economic, human, natural and disruptive incidents. This study discussed a number of effective measures for protecting the environment while ensuring food production yields. Additional research in other areas and certain improvements of this method in future studies may be necessary to develop a more effective method of managing and controlling agricultural-environmental interactions.