WorldWideScience

Sample records for ris design ow

  1. Ring Irrigation System (RIS design through customer preference representation

    Directory of Open Access Journals (Sweden)

    Ridwan Infandra I.Z.

    2018-01-01

    Full Text Available In agricultural field, irrigation is one of the most interesting considerations affecting the rate of plant growth and development. Micro-irrigation as the dripping or sprinkle method is one of the irrigation types that applies the small amount of water for fulfilling the humidity requirement. The most important factors affecting the demand of water for plants are soil conditions and effect of climatic factors. With less human labour required, to improve the irrigation method from the recent days, analyzing water used or water permeation automatically through the soil moisture has been raised as the interesting topic. Proposed in this research is the ring irrigation system (RIS which is introduced as an alternative channel for emitters that drip water directly onto the soil at the plant’s root zone where the soil conditions before and after watering can be quickly detected by the sensors. This RIS can be used for the potted plant, green house, or other small farm fields. Product design and development (PDD is applied in this research for assisting the designer to understand and create the RIS prototype properly according to the customer’s requirements where the suggested functions obtained will be added and tested.

  2. Design and verification of the Risø-B1 airfoil family for wind turbines

    DEFF Research Database (Denmark)

    Fuglsang, P.; Bak, C.; Gaunaa, M.

    2004-01-01

    This paper presents the design and experimental verification of the Risø-B1 airfoil family for MW-size wind turbines with variable speed and pitch control. Seven airfoils were designed with thickness-to-chord ratios between 15% and 53% to cover the entire span of a wind turbine blade. The airfoils...

  3. Design of a 21 m blade with Risø-A1 airfoils for active stall controlled wind turbines

    DEFF Research Database (Denmark)

    Fuglsang, Peter; Sangill, O.; Hansen, P.

    2002-01-01

    This is the final report, from the project, "Design of a Rotor/Airfoil Family for Active Stall-regulated Wind Turbines by Use of Multi-point Optimization". It describes the full scale testing of a 21 m wind turbine blade specially designed for active stallregulation. Design objectives were...... increased ratio of produced energy to turbine loads and more stable power control characteristics. Both were taken directly into account during the design of the blade using numerical optimization. The blade used theRisø-A1 airfoil family, which was specially designed for operation on wind turbine blades....... The new blade was designed to replace the LM 21.0P blade. A measurement campaign was carried out simultaneously on two identical adjacent wind turbines where onehad the new blades and the other had LM 21.0P blades. Power and loads including blade section moments for the new blades were measured to assess...

  4. The RITA spectrometer at Risø - design considerations and recent results

    Science.gov (United States)

    Clausen, K. N.; McMorrow, D. F.; Lefmann, K.; Aeppli, G.; Mason, T. E.; Schröder, A.; Issikii, M.; Nohara, M.; Takagi, H.

    In the new cold triple axis spectrometer RITA at Risø we have improved the front end by extensive use of state of the art optical elements and better shielding material. The analyser system is situated in one large open tank and consists of seven individually orientable PG(002) crystal analyser blades, and a 170 mm by 120 mm 2 areas sensitive micro-strip detector. In comparison to the old TAS6 spectrometer we have obtained a factor 2-5 gain in intensity on the sample, a substantially lower background, much more flexibility for optimising the instrument and the possibility to go beyond simple point-by-point inspection. The excellent performance of RITA in the standard TAS mode is exemplified by a study of the dynamics of ≈ 15 nm hematite (α-Fe 2O 3) nano-particles, and utilisation of horizontal and vertical focusing modes to study two dimensional systems is illustrated by a study of the spin fluctuations in the high Tc superconductor La 1.83Sr 0.17CuO 4.

  5. Application of D-optimal experimental design method to optimize the formulation of O/W cosmetic emulsions.

    Science.gov (United States)

    Djuris, J; Vasiljevic, D; Jokic, S; Ibric, S

    2014-02-01

    This study investigates the application of D-optimal mixture experimental design in optimization of O/W cosmetic emulsions. Cetearyl glucoside was used as a natural, biodegradable non-ionic emulsifier in the relatively low concentration (1%), and the mixture of co-emulsifiers (stearic acid, cetyl alcohol, stearyl alcohol and glyceryl stearate) was used to stabilize the formulations. To determine the optimal composition of co-emulsifiers mixture, D-optimal mixture experimental design was used. Prepared emulsions were characterized with rheological measurements, centrifugation test, specific conductivity and pH value measurements. All prepared samples appeared as white and homogenous creams, except for one homogenous and viscous lotion co-stabilized by stearic acid alone. Centrifugation testing revealed some phase separation only in the case of sample co-stabilized using glyceryl stearate alone. The obtained pH values indicated that all samples expressed mild acid value acceptable for cosmetic preparations. Specific conductivity values are attributed to the multiple phases O/W emulsions with high percentages of fixed water. Results of the rheological measurements have shown that the investigated samples exhibited non-Newtonian thixotropic behaviour. To determine the influence of each of the co-emulsifiers on emulsions properties, the obtained results were evaluated by the means of statistical analysis (ANOVA test). On the basis of comparison of statistical parameters for each of the studied responses, mixture reduced quadratic model was selected over the linear model implying that interactions between co-emulsifiers play the significant role in overall influence of co-emulsifiers on emulsions properties. Glyceryl stearate was found to be the dominant co-emulsifier affecting emulsions properties. Interactions between the glyceryl stearate and other co-emulsifiers were also found to significantly influence emulsions properties. These findings are especially important

  6. Development of strategies for effective communication of food risks and benefits across Europe: Design and conceptual framework of the FoodRisC project

    Science.gov (United States)

    2011-01-01

    Background European consumers are faced with a myriad of food related risk and benefit information and it is regularly left up to the consumer to interpret these, often conflicting, pieces of information as a coherent message. This conflict is especially apparent in times of food crises and can have major public health implications. Scientific results and risk assessments cannot always be easily communicated into simple guidelines and advice that non-scientists like the public or the media can easily understand especially when there is conflicting, uncertain or complex information about a particular food or aspects thereof. The need for improved strategies and tools for communication about food risks and benefits is therefore paramount. The FoodRisC project ("Food Risk Communication - Perceptions and communication of food risks/benefits across Europe: development of effective communication strategies") aims to address this issue. The FoodRisC project will examine consumer perceptions and investigate how people acquire and use information in food domains in order to develop targeted strategies for food communication across Europe. Methods/Design This project consists of 6 research work packages which, using qualitative and quantitative methodologies, are focused on development of a framework for investigating food risk/benefit issues across Europe, exploration of the role of new and traditional media in food communication and testing of the framework in order to develop evidence based communication strategies and tools. The main outcome of the FoodRisC project will be a toolkit to enable coherent communication of food risk/benefit messages in Europe. The toolkit will integrate theoretical models and new measurement paradigms as well as building on social marketing approaches around consumer segmentation. Use of the toolkit and guides will assist policy makers, food authorities and other end users in developing common approaches to communicating coherent messages to

  7. Development of strategies for effective communication of food risks and benefits across Europe: Design and conceptual framework of the FoodRisC project

    Directory of Open Access Journals (Sweden)

    Lima Luisa

    2011-05-01

    Full Text Available Abstract Background European consumers are faced with a myriad of food related risk and benefit information and it is regularly left up to the consumer to interpret these, often conflicting, pieces of information as a coherent message. This conflict is especially apparent in times of food crises and can have major public health implications. Scientific results and risk assessments cannot always be easily communicated into simple guidelines and advice that non-scientists like the public or the media can easily understand especially when there is conflicting, uncertain or complex information about a particular food or aspects thereof. The need for improved strategies and tools for communication about food risks and benefits is therefore paramount. The FoodRisC project ("Food Risk Communication - Perceptions and communication of food risks/benefits across Europe: development of effective communication strategies" aims to address this issue. The FoodRisC project will examine consumer perceptions and investigate how people acquire and use information in food domains in order to develop targeted strategies for food communication across Europe. Methods/Design This project consists of 6 research work packages which, using qualitative and quantitative methodologies, are focused on development of a framework for investigating food risk/benefit issues across Europe, exploration of the role of new and traditional media in food communication and testing of the framework in order to develop evidence based communication strategies and tools. The main outcome of the FoodRisC project will be a toolkit to enable coherent communication of food risk/benefit messages in Europe. The toolkit will integrate theoretical models and new measurement paradigms as well as building on social marketing approaches around consumer segmentation. Use of the toolkit and guides will assist policy makers, food authorities and other end users in developing common approaches to

  8. Development of strategies for effective communication of food risks and benefits across Europe: Design and conceptual framework of the FoodRisC project

    LENUS (Irish Health Repository)

    Barnett, Julie

    2011-05-13

    Abstract Background European consumers are faced with a myriad of food related risk and benefit information and it is regularly left up to the consumer to interpret these, often conflicting, pieces of information as a coherent message. This conflict is especially apparent in times of food crises and can have major public health implications. Scientific results and risk assessments cannot always be easily communicated into simple guidelines and advice that non-scientists like the public or the media can easily understand especially when there is conflicting, uncertain or complex information about a particular food or aspects thereof. The need for improved strategies and tools for communication about food risks and benefits is therefore paramount. The FoodRisC project ("Food Risk Communication - Perceptions and communication of food risks\\/benefits across Europe: development of effective communication strategies") aims to address this issue. The FoodRisC project will examine consumer perceptions and investigate how people acquire and use information in food domains in order to develop targeted strategies for food communication across Europe. Methods\\/Design This project consists of 6 research work packages which, using qualitative and quantitative methodologies, are focused on development of a framework for investigating food risk\\/benefit issues across Europe, exploration of the role of new and traditional media in food communication and testing of the framework in order to develop evidence based communication strategies and tools. The main outcome of the FoodRisC project will be a toolkit to enable coherent communication of food risk\\/benefit messages in Europe. The toolkit will integrate theoretical models and new measurement paradigms as well as building on social marketing approaches around consumer segmentation. Use of the toolkit and guides will assist policy makers, food authorities and other end users in developing common approaches to communicating

  9. XML specifications DanRIS

    DEFF Research Database (Denmark)

    2009-01-01

    XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now......XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now...

  10. Risø annual report 2001

    DEFF Research Database (Denmark)

    2002-01-01

    In this annual report, we present a small selection of Risø’s achievements in 2001. A more detailed review of Risø’s projects can be found in the Risø Annual Accounts for 2001 as well as in the annual progress reports prepared by the individual researchdepartments.......In this annual report, we present a small selection of Risø’s achievements in 2001. A more detailed review of Risø’s projects can be found in the Risø Annual Accounts for 2001 as well as in the annual progress reports prepared by the individual researchdepartments....

  11. Integrated RIS-PACS system

    International Nuclear Information System (INIS)

    Nishihara, Eitaro; Kura, Hiroyuki; Fukushima, Yuki

    1994-01-01

    We have developed an integrated RIS-PACS (radiology information system-picture archiving and communication system) system which supports examination, interpretation, and management in the diagnostic imaging department. The system was introduced in the Toshiba Hospital in May 1993, concurrently with the renewal of the hospital facilities. The integrated RIS-PACS system consists of a radiology information management system, and an image management system. The system supports wet (immediate) reading and chronological comparative reading using viewing workstation, enables routine operations to be performed in the diagnostic imaging department without film transportation, and contributes to the improvement of management efficiency in the department. (author)

  12. Risø årsberetning 2001

    DEFF Research Database (Denmark)

    2002-01-01

    I denne årsberetning præsenteres et lille udpluk af Risøs resultater i 2001. En mere detaljeret gennemgang af Risøs projekter findes i Risøs Virksomhedsregnskab for 2001 samt i forskningsafdelingernes egne årsberetninger....

  13. Development of strategies for effective communication of food risks and benefits across Europe: design and conceptual framework of the FoodRisC project.

    Science.gov (United States)

    Barnett, Julie; McConnon, Aine; Kennedy, Jean; Raats, Monique; Shepherd, Richard; Verbeke, Wim; Fletcher, Jon; Kuttschreuter, Margôt; Lima, Luisa; Wills, Josephine; Wall, Patrick

    2011-05-13

    European consumers are faced with a myriad of food related risk and benefit information and it is regularly left up to the consumer to interpret these, often conflicting, pieces of information as a coherent message. This conflict is especially apparent in times of food crises and can have major public health implications. Scientific results and risk assessments cannot always be easily communicated into simple guidelines and advice that non-scientists like the public or the media can easily understand especially when there is conflicting, uncertain or complex information about a particular food or aspects thereof. The need for improved strategies and tools for communication about food risks and benefits is therefore paramount. The FoodRisC project ("Food Risk Communication - Perceptions and communication of food risks/benefits across Europe: development of effective communication strategies") aims to address this issue. The FoodRisC project will examine consumer perceptions and investigate how people acquire and use information in food domains in order to develop targeted strategies for food communication across Europe. This project consists of 6 research work packages which, using qualitative and quantitative methodologies, are focused on development of a framework for investigating food risk/benefit issues across Europe, exploration of the role of new and traditional media in food communication and testing of the framework in order to develop evidence based communication strategies and tools. The main outcome of the FoodRisC project will be a toolkit to enable coherent communication of food risk/benefit messages in Europe. The toolkit will integrate theoretical models and new measurement paradigms as well as building on social marketing approaches around consumer segmentation. Use of the toolkit and guides will assist policy makers, food authorities and other end users in developing common approaches to communicating coherent messages to consumers in Europe. The

  14. Design of Cobalt Nanoparticles with Tailored Structural and Morphological Properties via O/W and W/O Microemulsions and Their Deposition onto Silica

    Directory of Open Access Journals (Sweden)

    Gabriella Di Carlo

    2015-03-01

    Full Text Available Cobalt nanostructures with different size and morphology, i.e., spherical nanoparticles, nanorods, and particles arranged into elongated structures, were prepared using micelles and microemulsions as confined reaction media. The syntheses were carried out using three types of systems: aqueous surfactant solutions, oil-in water (O/W, and water-in-oil (W/O microemulsions. The influence of the surfactant and the precipitating agent used for synthesis was also investigated. For this purpose, cobalt nanostructures were prepared using different non-ionic surfactants, namely Synperonic® 10/6, Pluronic® P123 and a mixture of SPAN 20–TWEEN 80. Three different precipitating agents were used: sodium borohydride, sodium hydroxide, and oxalic acid. Our findings revealed that by changing the type of reaction media as well as the precipitating agent it is possible to modify the shape and size of the cobalt nanostructures. Moreover, the use of O/W microemulsion generates better results in terms of colloidal stability and uniformity of particle size with respect to W/O microemulsion. The different cobalt nanostructures were supported on commercial and mesoporous silica; transmission electron microscopy (TEM images showed that after deposition the Co nanocrystals remain well dispersed on the silica supports. This behavior suggests their great potential in catalytic applications.

  15. Risø årsrapport 2003

    DEFF Research Database (Denmark)

    2004-01-01

    Risøs årsrapport 2003 er en opfølgning på planerne for Risøs virksomhed i 2003. Risøs bestyrelse skal som led i resultatkontrakten med Ministeriet for Videnskab, Teknologi og Udvikling aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav.Nærværende rapport indeholder data til brug...

  16. Risø årsrapport 2002

    DEFF Research Database (Denmark)

    2003-01-01

    Risøs årsrapport 2002 er en opfølgning på planerne for Risøs virksomhed i 2002. Risøs bestyrelse skal som led i resultatkontrakten med Ministeriet for Videnskab, Teknologi og Udvikling aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav.Nærværende rapport indeholder data til brug...

  17. Risø årsberetning 2002

    DEFF Research Database (Denmark)

    2003-01-01

    Risøs årsberetning markerer indledningen til en ny æra på Risø. I 2002 bekræftede regeringens gennemgang af sektorforskningen Risøs rolle som en af spydspidserne for fremtidsrettet energiforskning med spin-off til andre områder. Den nye æra understregesaf Folketingets beslutning i marts 2003 om a...

  18. Experimental investigation of re-entry aerodynamic phenomena - Development of non-intrusive ?ow diagnostics in a Ludwieg tube

    NARCIS (Netherlands)

    Schrijer, F.F.J.

    2010-01-01

    To further improve the design of hypersonic vehicles so that fully reusable systems become a reality, the detailed understanding of the ?ow ?eld that the vehicle generates is of paramount importance. The thesis deals with the aspects of experimental ?ow research which includes also the ?ow facility

  19. Risø annual report 1999

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2000-01-01

    Risø's purpose is to carry out research in the natural sciences and technology, affording Danish society new opportunities for technological development. The research is carried out in areas where Risø either has, or can achieve, an independent positionnationally, and international impact. Resear...

  20. Detection Limits Of The 125I Air Sampler ''RIS125''

    International Nuclear Information System (INIS)

    Belaish, I.; Levinson, S.; German, U.; Kravchik, T.

    1999-01-01

    A system for 125 I monitoring in air (RIS-125) was designed and manufactured at NRCN. The main features of the system are described elsewhere. The system can monitor 125 I air contamination in gaseous and aerosol forms. An air monitoring system should have a fast response and the lowest available Minimum Detectable Activity (MDA). The present work presents the characteristic MDA values of the system

  1. RIS4E Science Journalism Program

    Science.gov (United States)

    Whelley, N.; Bleacher, L.; Jones, A. P.; Bass, E.; Bleacher, J. E.; Firstman, R.; Glotch, T. D.; Young, K.

    2017-12-01

    NASA's Remote, In-Situ, and Synchrotron Studies for Science and Exploration (RIS4E) team addresses the goals of the Solar System Exploration Research Virtual Institute via four themes, one of which focuses on evaluating the role of handheld and portable field instruments for human exploration. The RIS4E Science Journalism Program highlights science in an innovative way: by instructing journalism students in the basics of science reporting and then embedding them with scientists in the field. This education program is powerful because it is deeply integrated within a science program, strongly supported by the science team and institutional partners, and offers an immersive growth experience for learners, exposing them to cutting edge NASA research and field technology. This program is preparing the next generation of science journalists to report on complex science accurately and effectively. The RIS4E Science Journalism Program consists of two components: a semester-long science journalism course and a reporting trip in the field. First, students participate in the RIS4E Science Journalism Practicum offered by the Stony Brook University School of Journalism. Throughout the semester, students learn about RIS4E science from interactions with the RIS4E science team, through classroom visits, one-on-one interviews, and tours of laboratories. At the conclusion of the course, several students, along with a professor and a teaching assistant, join the RIS4E team during the field season. The journalism students observe the entire multi-day field campaign, from set-up, to data collection and analysis, and investigation of questions that arise as a result of field discoveries. They watch the scientists formulate and test hypotheses in real time. The field component for the 2017 RIS4E Science Journalism Program took journalism students to the Potrillo Volcanic Field in New Mexico for a 10-day field campaign. Student feedback was overwhelmingly positive. They gained experience

  2. Risø årsberetning 2000

    DEFF Research Database (Denmark)

    2001-01-01

    År 2000 blev mere skelsættende for Risø, end man kunne forudse ved årets start. Den altoverskyggende begivenhed var beslutningen om at lukke forskningsreaktor DR3 og planerne om at videreføre forskningen ved det svejtsiske Paul Scherrer Institut. En andenvigtig begivenhed er planen om at overføre...

  3. Risø annual report 2000

    DEFF Research Database (Denmark)

    2001-01-01

    of Governors in November 2000. The new strategy serves as a beacon for the transformation process Risø is undergoing in 2001. This Annual Report shows that we produce ahealthy return on the research funds invested in us, and it is our ambition for this return to grow over the next few years....

  4. An academic radiology information system (RIS): a review of the commercial RIS systems, and how an individualized academic RIS can be created and utilized.

    Science.gov (United States)

    Tamm, E P; Kawashima, A; Silverman, P

    2001-06-01

    Current commercial radiology information systems (RIS) are designed for scheduling, billing, charge collection, and report dissemination. Academic institutions have additional requirements for their missions for teaching, research and clinical care. The newest versions of commercial RIS offer greater flexibility than prior systems. We sent questionnaires to Cerner Corporation, ADAC Health Care Information Systems, IDX Systems, Per-Se' Technologies, and Siemens Health Services regarding features of their products. All of the products we surveyed offer user customizable fields. However, most products did not allow the user to expand their product's data table. The search capabilities of the products varied. All of the products supported the Health Level 7 (HL-7) interface and the use of structured query language (SQL). All of the products were offered with an SQL editor for creating customized queries and custom reports. All products included capabilities for collecting data for quality assurance and included capabilities for tracking "interesting cases," though they varied in the functionality offered. No product offered dedicated functions for research. Alternatively, radiology departments can create their own client-server Windows-based database systems to supplement the capabilities of commercial systems. Such systems can be developed with "web-enabled" database products like Microsoft Access or Apple Filemaker Pro.

  5. ÜTRIS ja RIS / Ingmar Roos

    Index Scriptorium Estoniae

    Roos, Ingmar

    2010-01-01

    Maanteeamet on projekti „Ühistranspordi infosüsteemi arendamine“ (ÜTRIS) raames välja töötamas ühissõidukite reaalaja infosüsteemi (RIS). Nimetatud süsteemi abil tekib võimalus jälgida ühissõidukite sõiduplaani järgset teenindamist ning tuvastada kõrvalekalded plaanilisest sõidugraafikust

  6. RIs used in diagnosis and therapy in nuclear medicine and new manufacturing process of RIs

    International Nuclear Information System (INIS)

    Nagai, Yasuki; Hashimoto, Kazuyuki

    2014-01-01

    Although various types of RIs are utilized in the field of nuclear medicine, their stable supply in the future poses anxiety worldwide. Taking up Tc-99m, which is most widely used in diagnosis in nuclear medicine, as an example, this paper introduces the condition to make RIs available in nuclear medicine as well as the worldwide challenge to their stable supply. In the following step, this paper introduces the innovative manufacturing process of RIs that is under development in Japan, in which undermentioned various types of RIs are manufactured in an identical facility (accelerator), although both nuclear reactor and accelerator have been used for manufacturing/supplying various types of RIs up to now: (1) Mo-99 as the parent nuclide of Tc-99m, (2) Cu-67, whose manufacturing process is urgently desired as the RI to enable simultaneous diagnosis and therapy, and (3) Y-90, Cu-64, and Sc-47, which are expected for use in new nuclear medicine based on the creation of new medicines. It also describes the future challenge in Japan to the construction of a prototype accelerator. (A.O.)

  7. Economic impact of an integrated RIS/PACS system in a university hospital

    International Nuclear Information System (INIS)

    Kroeger, M.; Wetekam, V.; Nissen-Meyer, S.; Reiser, M.

    1999-01-01

    Problem: The goal of the current article is to demonstrate how qualitative and monetary effects resulting from an integrated RIS/PACS installation can be evaluated. Results: The sample analysis of a RIS/PACS solution specially designed for a university hospital demonstrates positive qualitative and monetary effects of the system. Under ideal conditions the payoff time of the investments is reached after 4 years of an assumed 8 years effective life of the system. Furthermore, under conservative assumptions, the risk analysis shows a probability of 0% for realising a negative net present value at the end of the payoff time period. Conclusion: It should be pointed out that the positive result of this sample analysis will not necessarily apply to other clinics or hospitals. However, the same methods may be used for the individual evaluation of the qualitative and monetary effects of a RIS/PACS installation in any clinic. (orig.) [de

  8. Spatial affects and imitations in OWS and Distortion

    DEFF Research Database (Denmark)

    Samson, Kristine

    the notions of affect (Thrift 2008, Ash & Amin 2002, Anderson & Holden 2008) and imitation (Tarde 1903), the paper will discuss recent urban crowd movements. OWS has spread a global social activist movement using affective bodily means of communication, whereas Distortion is a cultural street festival taking...... manner. For instance, both crowds do not merely gather and organize in terms of verbal communication, rather they organize virally, visually and through bodily affects and imitation. In that sense they appropriate urban space and its architectural design ”like viruses that hop between people, thereby...

  9. Risø publication activities in 1999. Risøs publikationsvirksomhed i 1999

    DEFF Research Database (Denmark)

    2000-01-01

    The report contains a list of references to the scientific and technical journal articles, books, reports, lectures published in full text, and to publications for a broader reader-ship authored by researchers at Risø National Laboratory and published in1999. If the publication mentioned in the r...

  10. RINAC, The Future Bridge to Operate with RIS

    NARCIS (Netherlands)

    Heijden, W.F.M. van der; Kerstjens, W.O.M.

    1999-01-01

    To operate in a RIS (River Information Services) environment certain 'tools' will be needed. RINAC deals with a concept of the bridge (wheel-house) of an inland navigation vessel, to operate in an RIS environment. RINAC stands for River Information, Navigation And Communication system, and describes

  11. Risøs årsplan 2005

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2005-01-01

    Årsplanen fastlægger rammerne for Forskningscenter Risøs virksomhed i 2005. Risø hører under Ministeriet for Videnskab, Teknologi og Udvikling og udfører naturvidenskabelig og teknisk-videnskabelig forskning. Formålet er at fremme en værdiskabende ogmiljømæssigt forsvarlig teknologisk udvikling i...

  12. Risøs årsplan 2002

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2001-01-01

    Denne årsplan fastlægger rammerne for Forskningscenter Risøs virksomhed i 2002. Risø hører under Ministeriet for Videnskab, Teknologi og Udvikling og udfører naturvidenskabelig og teknisk-videnskabelig forskning. Formålet er at fremme en værdiskabende ogmiljømæssigt forsvarlig teknologisk udvikli...

  13. Risøs årsplan 2004

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2003-01-01

    Årsplanen fastlægger rammerne for Forskningscenter Risøs virksomhed i 2004. Risø hører under Ministeriet for Videnskab, Teknologi og Udvikling og udfører naturvidenskabelig og teknisk-videnskabelig forskning. Formålet er at fremme en værdiskabende ogmiljømæssigt forsvarlig teknologisk udvikling i...

  14. Risøs årsplan 2001

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2000-01-01

    Denne årsplan fastlægger rammerne for Forskningscenter Risøs virksomhed i 2001. Risø hører under Forskningsministeriet og udfører naturvidenskabelig og teknisk-videnskabelig forskning. Formålet er at fremme en værdiskabende og miljømæssigt forsvarligteknologisk udvikling inden for sektorerne ener...

  15. Risøs årsplan 2003

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2002-01-01

    Årsplanen fastlægger rammerne for Forskningscenter Risøs virksomhed i 2003. Risø hører under Ministeriet for Videnskab, Teknologi og Udvikling og udfører naturvidenskabelig og teknisk-videnskabelig forskning. Formålet er at fremme en værdiskabende ogmiljømæssigt forsvarlig teknologisk udvikling i...

  16. Risøs årsplan 2006

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2005-01-01

    I 2006 fortsættes implementering af den nye strategi: Risøs strategi - Effekt i Samfundet. Vi øger formålsorienteringen af Risøs forskning, vi sikrer en bedre koordinering på tværs af afdelingerne, og vi fremmer samling om store projekter med eksternfinansiering. Overordnede markante tiltag i 200...

  17. Wind tunnel tests of Risø-B1-18 and Risø-B1-24

    DEFF Research Database (Denmark)

    Fuglsang, P.; Bak, Christian; Gaunaa, Mac

    2003-01-01

    This report contains 2D measurements of the Risø-B1-18 and Risø-B1-24 airfoils. The aerodynamic properties were derived from pressure measurements on the airfoil surface and in the wake. The measurements were conducted in the VELUX open jet wind tunnel,which has a background turbulence intensity...

  18. Workflow optimization beyond RIS and PACS

    International Nuclear Information System (INIS)

    Treitl, M.; Wirth, S.; Lucke, A.; Nissen-Meyer, S.; Trumm, C.; Rieger, J.; Pfeifer, K.-J.; Reiser, M.; Villain, S.

    2005-01-01

    Technological progress and the rising cost pressure on the healthcare system have led to a drastic change in the work environment of radiologists today. The pervasive demand for workflow optimization and increased efficiency of its activities raises the question of whether by employment of electronic systems, such as RIS and PACS, the potentials of digital technology are sufficiently used to fulfil this demand. This report describes the tasks and structures in radiology departments, which so far are only insufficiently supported by commercially available electronic systems but are nevertheless substantial. We developed and employed a web-based, integrated workplace system, which simplifies many daily tasks of departmental organization and administration apart from well-established tasks of documentation. Furthermore, we analyzed the effects exerted on departmental workflow by employment of this system for 3 years. (orig.) [de

  19. Risø energy report 8

    DEFF Research Database (Denmark)

    Sønderberg Petersen, Leif

    This report is volume 8 in a series started in 2002, and will take its point of reference in the need for the development of a highly flexible and intelligent energy system infrastructure which facilitates substantial higher amounts of renewable energy than today’s energy systems. This intelligent...... and flexible infrastructure is a prerequisite in achieving the goals set up by IPCC in 2007 on CO2 reductions as well as ensuring the future security of energy supply in all regions of the world. The report presents a generic approach for future infrastructure issues on local, regional and global scale...... with focus on the energy system. The report is based on chapters and updates from Risø Energy Report 1 – 7, as well as input from contributors to the DTU Climate Change Technology workshops and available international literature and reports....

  20. GrOW briefs: From research to policy | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-10-17

    Oct 17, 2017 ... ​For access to more GrOW findings and literature, visit the GrOW Research Series. Learn more about the GrOW program. What we do · Funding · Resources · About IDRC. Knowledge. Innovation. Solutions. Careers · Contact Us · Site map. Sign up now for IDRC news and views sent directly to your inbox ...

  1. Growth and Economic Opportunities for Women (GrOW) Frequently ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alejandra

    GrOW will take a broad perspective on the types of questions and evidence on ... question; (2) set the outcome in the broader context of the underlying programme theory, ... Communications from the GrOW team with applicants during the ... There are specific criteria and application processes for this call that should be.

  2. RIS modality interfaces. From proprietary solutions to DICOM worklist management

    International Nuclear Information System (INIS)

    Jaeger, D.; Kotter, E.; Langer, M.

    1999-01-01

    Radiologic information systems (RIS) and picture archiving and communication systems (PACS) are becoming increasingly widespread. This leads to new demands on the integration of the individual, formerly independent information systems (RIS, modalities, PACS). Possible ways of integrating individual systems are introduced. Besides the detailed description of different realizations of system communication, its role in the PACS at the university hospital in Freiburg is explained. The integration of different information systems still requires the use of proprietary interfaces. An appropriate integration generally has been realized in Freiburg. In the near future DICOM basic worklist management will standardize system integration and render an interdepartmental workflow concept possible. Even though an available communication standard exists, not all problems in the RIS-modality interface are solved. Different data models in the various RI systems and modalities demand certain degrees of freedom in the standard. Thus a satisfactory workflow cannot be guaranteed even when all involved systems conform with the standard. (orig.) [de

  3. Climatology of Wind Direction Fluctuations at Risø

    DEFF Research Database (Denmark)

    Kristensen, Leif; Panofsky, H. A.

    1976-01-01

    Standard deviations of wind direction fluctuations at 76 m at Risø for the first half year of 1975 have been analyzed as functions of wind speed and temperature lapse rate, either measured near the surface or near the level of the azimuth variations. Between 31 and 37% of the variance of the stan...

  4. List of Selected Publications 1983. Risø National Laboratory

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The list comprises a selection of scientific and technical publications of Risø National Laboratory and its staff during 1983. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Energy Supply and Supporting...... Technology, Environmental and Safety Research, Materials Research, Biotechnology and Radiation Research, Technical Support, General....

  5. Plastic solar cell research at Risø

    DEFF Research Database (Denmark)

    Krebs, Frederik C

    Plastiksolceller giver mulighed for direkte omdannelse af sol lys til elektrisk energi og består i sin enkelthed af et tyndt plastik lag der er lagt imellem to elektroder. På Risø forskes der i de grundlæggende principper for plastiksolceller samt ifremstillingsmetoder og stabiliteten under belys...

  6. Developing a self-learning training program for RIS computer skills.

    Science.gov (United States)

    Stike, R; Olivi, P

    2000-01-01

    The demonstration of competency by healthcare professionals remains a priority for hospital administrators, as well as for the Joint Commission on Accreditation of Healthcare Organizations (JCAHO). Unfortunately, staff members who have to complete competency exercises often describe the process as a burden. Ineffective training processes may be the culprit. Our teaching hospital developed a training program for the radiology information system (RIS) computer system used by an imaging department of more than 200 staff members. The emphasis of our training program was on the design phase and the contribution of subject-matter experts (SMEs) to the content and testing of training materials, which included a computer-assisted, self-learning manual (SLM) and a pocket guide. The first step in the design process was to identify subject matter experts (SMEs) within the imaging department. Seven SMEs were shadowed by the IT educator. The role of the SME was to demonstrate current practices with RIS, to state principles involved and to serve as a reference for questions during training development. The steps that followed planning and design were: training delivery, evaluation and ongoing training. These steps were implemented in a series of workshops, which included soliciting feedback about the training program. Feedback was used to revise the SLM. The RIS SLM training project was a huge success for everyone involved. The average score for the core-skills test was higher than 90 percent. Seventy-five percent of the current staff was trained in the first phase, including radiology students. Our yearly cost savings using SLM workshops instead of on-the-job training will be about $35,000. We attribute the success of this project to a detailed timeline, SME contributions, the pilot testing phase, and the positive attitude of the imaging staff.

  7. BGI-RIS: an integrated information resource and comparative analysis workbench for rice genomics

    DEFF Research Database (Denmark)

    Zhao, Wenming; Wang, Jing; He, Ximiao

    2004-01-01

    Rice is a major food staple for the world's population and serves as a model species in cereal genome research. The Beijing Genomics Institute (BGI) has long been devoting itself to sequencing, information analysis and biological research of the rice and other crop genomes. In order to facilitate....... Designed as a basic platform, BGI-RIS presents the sequenced genomes and related information in systematic and graphical ways for the convenience of in-depth comparative studies (http://rise.genomics.org.cn/). Udgivelsesdato: 2004-Jan-1...

  8. Grid enablement of OpenGeospatial Web Services: the G-OWS Working Group

    Science.gov (United States)

    Mazzetti, Paolo

    2010-05-01

    international projects investigated different aspects of this integration, developing demonstrators and Proof-of-Concepts; In this context, "gLite enablement of OpenGeospatial Web Services" (G-OWS) is an initiative started in 2008 by the European CYCLOPS, GENESI-DR, and DORII Projects Consortia in order to collect/coordinate experiences on the enablement of OWS on top of the gLite middleware [GOWS]. Currently G-OWS counts ten member organizations from Europe and beyond, and four European Projects involved. It broadened its scope to the development of Spatial Data and Information Infrastructures (SDI and SII) based on the Grid/Cloud capacity in order to enable Earth Science applications and tools. Its operational objectives are the following: i) to contribute to the OGC-OGF initiative; ii) to release a reference implementation as standard gLite APIs (under the gLite software license); iii) to release a reference model (including procedures and guidelines) for OWS Grid-ification, as far as gLite is concerned; iv) to foster and promote the formation of consortiums for participation to projects/initiatives aimed at building Grid-enabled SDIs To achieve this objectives G-OWS bases its activities on two main guiding principles: a) the adoption of a service-oriented architecture based on the information modelling approach, and b) standardization as a means of achieving interoperability (i.e. adoption of standards from ISO TC211, OGC OWS, OGF). In the first year of activity G-OWS has designed a general architectural framework stemming from the FP6 CYCLOPS studies and enriched by the outcomes of other projects and initiatives involved (i.e. FP7 GENESI-DR, FP7 DORII, AIST GeoGrid, etc.). Some proof-of-concepts have been developed to demonstrate the flexibility and scalability of such architectural framework. The G-OWS WG developed implementations of gLite-enabled Web Coverage Service (WCS) and Web Processing Service (WPS), and an implementation of a Shibboleth authentication for g

  9. Plateau iris Íris em platô

    Directory of Open Access Journals (Sweden)

    Alberto Diniz Filho

    2008-10-01

    Full Text Available The term plateau iris was first coined in 1958 to describe the iris configuration of a patient. Two years later the concept of plateau iris was published. In 1977, the plateau iris configuration was classically defined as presurgical changes of an eye with a relative normal central anterior chamber depth, flat iris by conventional biomicroscopy, but displaying an extremely narrow or closed angle on gonioscopic examination. On the other hand, the plateau iris syndrome was defined as an acute glaucoma crisis in one eye with a relative normal central anterior chamber depth and patent iridotomy on direct examination, presenting angle closure confirmed by gonioscopic examination after mydriasis. In 1992, the anatomic aspects of plateau iris were studied using ultrasound biomicroscopy. Finally, plateau iris has been considered an anatomic variant of iris structure in which the iris periphery angulates sharply forward from its insertion point and then again angulates sharply and centrally backward, along with an anterior positioning of the ciliary processes seen on ultrasound biomicroscopy. The clinical treatment of plateau iris syndrome is carried out with topical use of pilocarpine. However, the definitive treatment should be fulfilled by performing an argon laser peripheral iridoplasty.O termo íris em platô foi primeiramente inventado em 1958 para descrever a configuração da íris de um paciente. Dois anos depois o conceito de íris em platô foi publicado. Em 1977, a configuração de íris em platô foi classicamente definida como alterações pré-cirúrgicas de um olho com uma profundidade de câmara anterior relativamente normal, íris plana pela biomicroscopia convencional, mas mostrando um ângulo extremamente estreito ou fechado pela gonioscopia. Por outro lado, a síndrome de íris em platô foi definida como uma crise de glaucoma agudo em um olho com uma profundidade de câmara anterior relativamente normal e uma iridectomia patente ao

  10. Ring Irrigation System (RIS) design through customer preference representation

    OpenAIRE

    Ridwan Infandra I.Z.; Rianmora Suchada; Werawatganon Siwat

    2018-01-01

    In agricultural field, irrigation is one of the most interesting considerations affecting the rate of plant growth and development. Micro-irrigation as the dripping or sprinkle method is one of the irrigation types that applies the small amount of water for fulfilling the humidity requirement. The most important factors affecting the demand of water for plants are soil conditions and effect of climatic factors. With less human labour required, to improve the irrigation method from the recent ...

  11. LES of flow in the street canyon

    OpenAIRE

    Brechler Josef; Fuka Vladimír

    2012-01-01

    Results of computer simulation of flow over a series of street canyons are presented in this paper. The setup is adapted from an experimental study by [4] with two different shapes of buildings. The problem is simulated by an LES model CLMM (Charles University Large Eddy Microscale Model) and results are analysed using proper orthogonal decomposition and spectral analysis. The results in the channel (layout from the experiment) are compared with results with a free top boundary.

  12. LES of flow in the street canyon

    Directory of Open Access Journals (Sweden)

    Brechler Josef

    2012-04-01

    Full Text Available Results of computer simulation of flow over a series of street canyons are presented in this paper. The setup is adapted from an experimental study by [4] with two different shapes of buildings. The problem is simulated by an LES model CLMM (Charles University Large Eddy Microscale Model and results are analysed using proper orthogonal decomposition and spectral analysis. The results in the channel (layout from the experiment are compared with results with a free top boundary.

  13. RIS and reservoirs in the NW and central Himalayan foothills

    International Nuclear Information System (INIS)

    Agrawal, R.C.

    1989-02-01

    There are nine (impounded) and three (under construction) tall (height exceeding 100 m) and large (capacity exceeding 1 km 3 ) reservoirs located in the northwestern and central Himalayan foothills. Natural earthquakes having magnitude greater than 7 have occurred in their vicinity in the past but there are no reports of reservoir associated seismic activity from a few of these sites which are under seismic surveillance following the guidelines of Indian Standard IS: 4967-1968. Case study of monitoring the seismicity around one site points to the need for rewriting the Standard. Reasons for non-occurrence of RIS in this seismically active environment are discussed. (author). 18 refs, 4 figs, 3 tabs

  14. Progress in TL Dating at Risø

    DEFF Research Database (Denmark)

    Mejdahl, V.

    1972-01-01

    This article outlines the thermoluminescent dating technique employed at Risö. The intensity of beta and gamma radiation is determined by means of the TL phosphors CaSO4:Mn and CaSO4:Dy, and the determination of accumulated exposure is based on quartz and feldspar inclusions with a size of 0.......3–0.5 mm. Results are presented of a dating programme comprising sherds, bricks, burned stones and burned clay (from kilns) from seventeen excavation sites. The age of the sites ranged from a.d. 1600 to 4000 b.c....

  15. KIS-RIS-PACS integration: the Marburg approach

    International Nuclear Information System (INIS)

    Klose, K.J.; Schaefer, C.; Kail, S.; Roethke, M.; Zhang, L.

    2005-01-01

    When describing the development of data processing at the Department of Radiology at the Philipps University of Marburg, three phases can be identified covering the areas of patient care, education, and research as well as administrative and organizational aspects. The first phase (1987-1995) was centered on radiology and characterized by the early implementation of the radiology information system (RIS) and installation of a picture archiving and communication system (PACS). The experiences gained during this phase led to intensive discussion on application-oriented information processing. The second phase (1996-2000) describes the changes in the general framework brought by Internet technology and international standards. The course was set for the future of data processing in the hospital setting. The phase ended with implementation of a clinical workplace system (KAS) as the basis for a comprehensive electronic patient record and the switch in radiology to an integrated RIS solution. The third phase (2001-2006) addressed further implementation and development of clinical data management in which both regular documentation of patient data and information processing not related to patients are optimized by making use of Intranet/Internet technology. It includes the hospital wide implementation of PACS and the forthcoming phase of information processing increasingly shaped by workflow and decision support. (orig.) [de

  16. RisøScan 1.0 - User manual and toolset for retrospective validation

    DEFF Research Database (Denmark)

    Helt-Hansen, Jakob

    2004-01-01

    The RisøScan software is used for dose measurements with radiochromic films that color visibly. This report consists of two documents for use with the RisøScan software. The User Manual tells how to use the program and the Toolset for RetrospectiveValidation describes how to perform a retrospective...

  17. Risøs virksomhedsregnskab 1999. Opfølgning på planerne for året 1999

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2000-01-01

    Risøs Virksomhedsregnskab 1999 er en opfølgning på planerne for Risøs virksomhed i 1999. Risøs bestyrelse skal som led i resultatkontrakten med Forskningsministeriet aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav. Derudover gives engenerel overordnet rapportering af årets re...

  18. Risøs virksomhedsregnskab 2001. Opfølgning på planerne for året 2001

    DEFF Research Database (Denmark)

    2002-01-01

    Risøs Virksomhedsregnskab 2001 er en opfølgning på planerne for Risøs virksomhed i 2001. Risøs bestyrelse skal som led i resultatkontrakten med Ministeriet for Videnskab, Teknologi og Udvikling aflægge årlige rapporter om opfyldelsen af de fastlagteresultatkrav. Nærværende rapport indeholder data...

  19. Risøs virksomhedsregnskab 2000. Opfølgning på planerne for året 2000

    DEFF Research Database (Denmark)

    Rosendahl, L.; Aabling-Thomsen, E.; Kjems, J.K.(eds.)

    2001-01-01

    Risøs Virksomhedsregnskab 2000 er en opfølgning på planerne for Risøs virksomhed i 2000. Risøs bestyrelse skal som led i resultatkontrakten med IT- og Forskningsministeriet aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav. Nærværenderapport indeholder data til brug for denne v...

  20. Understanding sustainable seafood consumption behavior: an examination of the Ocean Wise (OW initiative in British Columbia

    Directory of Open Access Journals (Sweden)

    Katherine M. Dolmage

    2016-06-01

    Full Text Available Sustainable seafood labeling programs have been developed as one of several efforts to address the current dire trends in fish stocks. The Ocean Wise (OW program, started at the Vancouver Aquarium (Canada, works with restaurateurs and suppliers to simplify sustainable purchasing decisions. By aiding restaurateurs with responsible purchasing, OW hopes to shift demand to sustainable seafood products. OW has grown in numbers and spread across Canada quickly; we examine the factors associated with individual and organizational decisions to participate in the program, including personal, business, and program-related factors. These factors were examined in relation to OW membership by Vancouver restaurateurs. Results show that restaurateurs with greater knowledge of seafood issues and restaurants with greater commitment to a range of green initiatives are more likely to participate in the OW program. By focusing efforts on education and incorporating a range of green values into marketing, OW can maximize their limited resources to grow membership.

  1. Blood gas and serum biochemical RIs for healthy newborn Murrah buffaloes (Bubalus bubalis).

    Science.gov (United States)

    Santana, André M; Silva, Daniela G; Clemente, Virna; Pizauro, Lucas J L; Bernardes, Priscila A; Santana, Clarissa H; Eckersall, Peter D; Fagliari, José J

    2018-03-01

    There is a lack of published work on RIs for newborn buffaloes. Establishing blood gas and serum biochemical RIs for newborn buffaloes is important for monitoring health. This study establishes blood gas and serum biochemical RIs of newborn buffaloes. Twenty-eight newborn buffaloes, 10-30 days old, were selected. Thirty blood biochemical variables were analyzed. The Anderson-Darling test was used to assess the normality of the distribution. The Dixon test and the Tukey test were used to identify outliers. The RI and 90% CI were determined using standard and robust methods and the Box-Cox transformation. A total of 30 RIs for healthy buffalo calves have been reported in this study. RIs for blood gas variables were reported for pH, partial pressure of oxygen (pO 2 ), partial pressure of carbon dioxide (pCO 2 ), saturation of O 2 (SO 2 ), bicarbonate (cHCO 3 - ), base excess (BE), total carbon dioxide (ctCO 2 ), and anion gap (AG). RIs for serum biochemical variables were reported for glucose (GLU), direct bilirubin (DB), total bilirubin (TB), AST, ALP, GGT, CK, LDH, creatinine (CREA), urea, cholesterol (CHOL), triglycerides (TG), Ca, P, Mg, Na, K, iCa, Cl, iron, total protein (TP), and albumin (ALB). This is the first reported study covering complete serum chemistry and blood gas RIs for healthy 1-month-old Murrah buffaloes. © 2018 American Society for Veterinary Clinical Pathology.

  2. Making Growth Work for Women in Low-income Countries (GrOW ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project is part of the Growth and Economic Opportunities for Women (GrOW) program. GrOW is a five-year, multi-funder partnership with the UK's Department for International Development (DFID), The William ... In addition to 10 projects addressing the barriers to women's economic ... Careers · Contact Us · Site map.

  3. Semantic Mediation via Access Broker: the OWS-9 experiment

    Science.gov (United States)

    Santoro, Mattia; Papeschi, Fabrizio; Craglia, Massimo; Nativi, Stefano

    2013-04-01

    Even with the use of common data models standards to publish and share geospatial data, users may still face semantic inconsistencies when they use Spatial Data Infrastructures - especially in multidisciplinary contexts. Several semantic mediation solutions exist to address this issue; they span from simple XSLT documents to transform from one data model schema to another, to more complex services based on the use of ontologies. This work presents the activity done in the context of the OGC Web Services Phase 9 (OWS-9) Cross Community Interoperability to develop a semantic mediation solution by enhancing the GEOSS Discovery and Access Broker (DAB). This is a middleware component that provides harmonized access to geospatial datasets according to client applications preferred service interface (Nativi et al. 2012, Vaccari et al. 2012). Given a set of remote feature data encoded in different feature schemas, the objective of the activity was to use the DAB to enable client applications to transparently access the feature data according to one single schema. Due to the flexible architecture of the Access Broker, it was possible to introduce a new transformation type in the configured chain of transformations. In fact, the Access Broker already provided the following transformations: Coordinate Reference System (CRS), spatial resolution, spatial extent (e.g., a subset of a data set), and data encoding format. A new software module was developed to invoke the needed external semantic mediation service and harmonize the accessed features. In OWS-9 the Access Broker invokes a SPARQL WPS to retrieve mapping rules for the OWS-9 schemas: USGS, and NGA schema. The solution implemented to address this problem shows the flexibility and extensibility of the brokering framework underpinning the GEO DAB: new services can be added to augment the number of supported schemas without the need to modify other components and/or software modules. Moreover, all other transformations (CRS

  4. The imperatorin derivative OW1, a new vasoactive compound, inhibits VSMC proliferation and extracellular matrix hyperplasia

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Zhang, Yu; Wang, Tao; He, Jianyu; He, Huaizhen; He, Langchong, E-mail: helc@mail.xjtu.edu.cn

    2015-04-15

    Chronic hypertension induces vascular remodeling. The most important factor for hypertension treatment is reducing the risk of cardiovascular disease. OW1 is a novel imperatorin derivative that exhibits vasodilative activity and antihypertensive effects in two-kidney one-clip (2K1C) renovascular hypertensive rats. It also inhibited vascular remodeling of the thoracic aorta in a previous study. Here, the inhibitory effects and mechanisms of OW1 on arterial vascular remodeling were investigated in vitro and in 2K1C hypertensive rats in vivo. OW1 (20 μM, 10 μM, 5 μM) inhibited Ang II-induced vascular smooth muscle cells (VSMCs) proliferation and ROS generation in vitro. OW1 also reversed the Ang II-mediated inhibition of α-SMA levels and stimulation of OPN levels. Histology results showed that treatment of 2K1C hypertensive rats with OW1 (20, 40, and 80 mg/kg per day, respectively for 5 weeks) in vivo significantly decreased the number of VSMCs, the aortic cross-sectional area (CSA), the media to lumen (M/L) ratio, and the content of collagen I and III in the mesenteric artery. Western blot results also revealed that OW1 stimulated the expression of α-SMA and inhibited the expression of collagen I and III on the thoracic aorta of 2K1C hypertensive rats. In mechanistic studies, OW1 acted as an ACE inhibitor and affected calcium channels. The suppression of MMP expression and the MAPK pathway may account for the effects of OW1 on vascular remodeling. OW1 attenuated vascular remodeling in vitro and in vivo. It could be a novel candidate for hypertension intervention. - Highlights: • OW1, an imperatorin derivative, attenuates vascular remodeling caused by hypertension. • OW1 inhibits VSMC proliferation and media layer hypertrophy. • OW1 acts as an ACE inhibitor and affects calcium channels. • Suppression of MMPs expression and MAPK pathway may account for the effects of OW1 on vascular remodeling.

  5. Tensile fracture behaviors of T-ZnOw/polyamide 6 composites

    International Nuclear Information System (INIS)

    Shi Jing; Wang Yong; Liu Li; Bai Hongwei; Wu Jun; Jiang Chongxi; Zhou, Zuowan

    2009-01-01

    As a part of serial work about the application of tetra-needle-shaped zinc oxide whisker (T-ZnOw) in polymer composites, this work is focused on the crystallization and tensile fracture behaviors of T-ZnOw/polyamide 6 (T-ZnOw/PA6) composites. Our results show that the addition of T-ZnOw improves the composites tensile strength greatly. For virgin PA6, the stress-strain curve exhibits double-yielding phenomenon. Surface modified T-ZnOw reinforced PA6 composites exhibit higher yield stress and smaller strain-to-fracture compared with virgin PA6. The morphologies of tensile-fractured surfaces show that, addition of T-ZnOw changes the fracture mode from crazing-tearing/brittle fracture mode of virgin PA6 into fibrillation/brittle fracture mode of PA6 composites. Especially, the fracture process of T-ZnOw in composites during the tensile test has been characterized by scanning electronic microscope (SEM) and the corresponding reinforcement mechanism has been discussed.

  6. RisQ: Recognizing Smoking Gestures with Inertial Sensors on a Wristband

    Science.gov (United States)

    Parate, Abhinav; Chiu, Meng-Chieh; Chadowitz, Chaniel; Ganesan, Deepak; Kalogerakis, Evangelos

    2015-01-01

    Smoking-induced diseases are known to be the leading cause of death in the United States. In this work, we design RisQ, a mobile solution that leverages a wristband containing a 9-axis inertial measurement unit to capture changes in the orientation of a person's arm, and a machine learning pipeline that processes this data to accurately detect smoking gestures and sessions in real-time. Our key innovations are fourfold: a) an arm trajectory-based method that extracts candidate hand-to-mouth gestures, b) a set of trajectory-based features to distinguish smoking gestures from confounding gestures including eating and drinking, c) a probabilistic model that analyzes sequences of hand-to-mouth gestures and infers which gestures are part of individual smoking sessions, and d) a method that leverages multiple IMUs placed on a person's body together with 3D animation of a person's arm to reduce burden of self-reports for labeled data collection. Our experiments show that our gesture recognition algorithm can detect smoking gestures with high accuracy (95.7%), precision (91%) and recall (81%). We also report a user study that demonstrates that we can accurately detect the number of smoking sessions with very few false positives over the period of a day, and that we can reliably extract the beginning and end of smoking session periods. PMID:26688835

  7. Strengthening your ties to referring physicians through RIS/PACS integration.

    Science.gov (United States)

    Worthy, Susan; Rounds, Karla C; Soloway, Connie B

    2003-01-01

    Many imaging centers are turning to technology solutions to increase refering physician satisfaction, implementing such enhancements as automated report distribution, picture archiving and communications system (PACS), radiology information systems (RIS), and web-based results access. However, without seamless integration, these technology investments don't address the challenge at its core: convenient and reliable, two-way communication and interaction with referring physicians. In an integrated RIS/PACS solution, patient tracking in the RIS and PACS study status are logged and available to users. The time of the patient's registration at the imaging center, the exam start and completion time, the patient's departure time from the imaging center, and results status are all tracked and logged. An integrated RIS/PACS solution provides additional support to the radiologist, a critical factor that can improve the turnaround time of results to referring physicians. The RIS/PACS enhances the interpretation by providing the patient's history, which gives the radiologist additional insight and decreases the likelihood of missing a diagnostic element. In a tightly integrated RIS/PACS solution, results information is more complete. Physicians can view reports with associated images selected by the radiologist. They will also have full order information and complete imaging history including prior reports and images. Referring physicians can access and view images and exam notes at the same time that the radiologist is interpreting the exam. Without the benefit of an integrated RIS/PACS system, the referring physician would have to wait for the signed transcription to be released. In a seamlessly integrated solution, film-tracking modules within the RIS are fused with digital imaging workflow in the PACS. Users can see at a glance if a historical exam is available on film and benefit when a complete study history--both film-based and digital--is presented with the current

  8. Qualifying the use of RIS data for patient dose by comparison with DICOM header data

    International Nuclear Information System (INIS)

    Wilde, R.; Charnock, P.; McDonald, S.; Moores, B. M.

    2011-01-01

    A system was developed in 2008 to calculate patient doses using Radiology Information System (RIS) data and presents these data as a patient dose audit. One of the issues with this system was the quality of user-entered data. It has been shown that Digital Imaging and Communication in Medicine (DICOM) header data can be used to perform dose audits with a high level of data accuracy. This study aims to show that using RIS data for dose audits is not only a viable alternative to using DICOM header data, but that it has advantages. A new system was developed to pull header data from DICOM images easily and was installed on a workstation within a hospital department. Data were recovered for a common set of examinations using both RIS and DICOM header data. The data were compared on a result-by-result basis to check for consistency of common fields between RIS and DICOM, as well as assessing the value of data fields uncommon to both systems. The study shows that whilst RIS is not as accurate as DICOM, it does provide enough accurate data and that it has other advantages over using a DICOM approach. These results suggest that a 'best of both worlds' may be achievable using Modality Performed Procedure Step (MPPS). (authors)

  9. A new luminescence detection and stimulation head for the Risø TL/OSL reader

    International Nuclear Information System (INIS)

    Lapp, T.; Kook, M.; Murray, A.S.; Thomsen, K.J.; Buylaert, J.-P.; Jain, M.

    2015-01-01

    A new automated Detection And Stimulation Head (DASH) has been developed for the Risø TL/OSL luminescence reader to provide easy access to new technologies, new signals and new measurement methods. The automated DASH includes a filter changer and a detector changer that makes it possible to change stimulation filters (4 × 4 filter combinations possible) and detectors (3 detectors possible) as part of a measurements sequence. The new automated DASH with dedicated driver electronics does not affect the use of other attachments, and can be retrospectively fitted to existing Risø TL/OSL readers. - Highlights: • A new detection and stimulation head for the Risø TL/OSL reader is described. • An example of the use of the filter changer is presented. • The power and spatial uniformity of blue, green and IR stimulation are characterised. • The potential of an EMCCD camera detector is described.

  10. Temperature distribution in Risø Flexhouse Room 3 with different heating control principles

    DEFF Research Database (Denmark)

    Simone, Angela; Rode, Carsten

    2009-01-01

    This report presents the measurements of local thermal conditions in one room (“Room 3”) of the so-called “Flexouse” located at Risø DTU. The house is part of Risø DTU’s SYSLAB facility used to study the interaction of different facilities that supply and use energy. The facility has been used in...... to predict the overall dynamic thermal properties of the building. The project is part of a wider complex of projects on predicting the electricity and heating energy consumption in dwellings....

  11. Radioactivity in the Risø District January-June 2010

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January - June 2010. The mean concentrations in air were: 0.99±1.11 μBq m–3 of 137Cs, 4.56±2.71 mBq m–3 of 7Be and 0.49±0.57 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the first half of 20...

  12. Radioactivity in the Risø District July-December 2014

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2014. The mean concentrations in air were: 0.31±0.24 μBq m–3 of 137Cs, 2.70±1.13 mBq m–3 of 7Be and 0.28±0.22 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  13. Radioactivity in the Risø District January-June 2011

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2010. The mean concentrations in air were: 0.34±0.26 μBq m–3 of 137Cs, 2.58±1.09 mBq m–3 of 7Be and 0.23±0.19 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  14. Radioactivity in the Risø District July-December 2011

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2011. The mean concentrations in air were: 0.25±0.19 μBq m–3 of 137Cs, 2.81±1.71 mBq m–3 of 7Be and 0.23±0.18 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  15. Radioactivity in the Risø District July-December 2010

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2010. The mean concentrations in air were: 0.34±0.26 μBq m–3 of 137Cs, 2.58±1.09 mBq m–3 of 7Be and 0.23±0.19 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  16. Radioactivity in the Risø District January-June 2014

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January-June 2014. The mean concentrations in air were: 0.47±0.45 μBq m–3 of 137Cs, 2.96±1.33 μBq m–3 of 7Be and 0.27±0.24 μBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the first half of 2013...

  17. Radioactivity in the Risø District July-December 2012

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2012. The mean concentrations in air were: 0.32±0.31 μBq m–3 of 137Cs, 3.04±0.99 mBq m–3 of 7Be and 0.22±0.18 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  18. Radioactivity in the Risø District January-June 2012

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January-June 2012. The mean concentrations in air were: 0.48±0.38 μBq m–3 of 137Cs, 3.69±1.79 mBq m–3 of 7Be and 0.21±0.20 mBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the first half of 2011...

  19. Radioactivity in the Risø District July-December 2015

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July-December 2015. The mean concentrations in air were: 0.24±0.18 μBq m–3 of 137Cs, 2.71±0.88 mBq m–3 of 7Be and 0.28±0.20 mBq m–3 of 210Pb (±1 S.D.). The depositions by precipitation at Risø in the second half of 2015 were:...

  20. Radioactivity in the Risø District January-June 2015

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January-June 2015. The mean concentrations in air were: 0.23±0.18 μBq m–3 of 137Cs, 2.19±0.91 μBq m–3 of 7Be and 0.13±0.05 μBq m–3 of 210Pb (±1 S.D.). The depositions by precipitation at Risø in the first half of 2015 were: 0...

  1. Radioactivity in the Risø District July-December 2013

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in July - December 2013. The mean concentrations in air were: 0.20±0.08 μBq m–3 of 137Cs, 2.23±0.64 μBq m–3 of 7Be and 0.16±0.08 μBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the second half of ...

  2. Radioactivity in the Risø District January-June 2016

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January-June 2016. The mean concentrations in air were: 0.28±0.17 μBq m–3 of 137Cs, 2.58±1.21 mBq m–3 of 7Be and 0.23±0.15 mBq m–3 of 210Pb (±1 S.D.). The depositions by precipitation at Risø in the first half of 2016 were: 0...

  3. Radioactivity in the Risø District January-June 2013

    DEFF Research Database (Denmark)

    Nielsen, Sven Poul; Andersson, Kasper Grann; Miller, Arne

    The environmental surveillance of the Risø environment was continued in January-June 2013. The mean concentrations in air were: 0.55±0.51 μBq m–3 of 137Cs, 2.96±1.18 μBq m–3 of 7Be and 0.26±0.25 μBq m–3 of 210Pb (±1 S.D.; N = 26). The depositions by precipitation at Risø in the first half of 2013...

  4. Interfacial (o/w) properties of naphthetic acids and metal naphthenates, naphtenic acid characterization and metal naphthenate inhibition

    Energy Technology Data Exchange (ETDEWEB)

    Brandal, Oeystein

    2005-07-01

    Deposition of metal naphthenates in process facilities is becoming a huge problem for petroleum companies producing highly acidic crudes. In this thesis, the main focus has been towards the oil-water (o/w) interfacial properties of naphthenic acids and their ability to react with different divalent cations across the interface to form metal naphthenates. The pendant drop technique was utilized to determine dynamic interfacial tensions (IFT) between model oil containing naphthenic acid, synthetic as well as indigenous acid mixtures, and pH adjusted water upon addition of different divalent cations. Changes in IFT caused by the divalent cations were correlated to reaction mechanisms by considering two reaction steps with subsequent binding of acid monomers to the divalent cation. The results were discussed in light of degree of cation hydration and naphthenic acid conformation, which affect the interfacial conditions and thus the rate of formation of 2:1 complexes of acid and cations. Moreover, addition of non-ionic oil-soluble surfactants used as basis compounds in naphthenate inhibitors was found to hinder a completion of the reaction through interfacial dilution of the acid monomers. Formation and stability of metal naphthenate films at o/w interfaces were studied by means of Langmuir technique with a trough designed for liquid-liquid systems. The effects of different naphthenic acids, divalent cations, and pH of the subphase were investigated. The results were correlated to acid structure, cation hydration, and degree of dissociation, which all affect the film stability against compression. Naphthenic acids acquired from a metal naphthenate deposit were characterized by different spectroscopic techniques. The sample was found to consist of a narrow family of 4-protic naphthenic acids with molecular weights around 1230 g/mol. These acids were found to be very o/w interfacially active compared to normal crude acids, and to form Langmuir monolayers with stability

  5. New Oils for Cosmetic O/W Emulsions: In Vitro/In Vivo Evaluation

    Directory of Open Access Journals (Sweden)

    Giovana Damasceno Sousa

    2018-01-01

    Full Text Available The aim of this study was to design new cosmetic formulations containing oils from catolé, licuri and spent coffee grounds, and to evaluate their immediate and long-term effects on skin barrier function and skin hydration. Nonionic oil-in-water (o/w emulsions were prepared and physicochemically characterized. The effects of the formulations were assessed by volunteers and by measuring the water content of the epidermis (WCE and transepidermal water loss (TEWL both two hours and 20 days after daily application. The irritation potential was evaluated using three different methods: the Hen’s egg chorioallantoic membrane test (HET-CAM; the observation of undesirable effects after skin formulation application, and by using the L*a*b* system to verify changes in skin coloring. The results obtained showed that the formulations containing 10% of these oils presented promising characteristics in the improvement of hydration and skin barrier function when compared to the baseline values and with the placebo cream. According to the sensory evaluation performed, all creams were found to have great acceptability.

  6. Write-up for the Diffractometer D1 at Risø

    DEFF Research Database (Denmark)

    Bundgaard, Jørgen; Krebs Larsen, F.; Lebech, Bente

    Manual for the crystallographic program system used to control the 4-circle neutron diffractometer D1/TASII at DR3, Risø. The mechanical part of the diffractometer consists of a monochromator part which allows an easy change of incident neutron wavelength and a four-circle HUBER goniostate consis...

  7. Betooniaeg - betoon interjööris / Maris Kerge, Kadri Kerge

    Index Scriptorium Estoniae

    Kerge, Maris

    2005-01-01

    Kolme näite varal - New Yorgi JFK lennujaama kuues terminal (arhitekt Eero Saarinen), City Plaza söökla (Pille Lausmäe sisearhitektuuribüroo), eramu Veskimöldres (arhitek Andres Alver) - betooni kasutusvõimalustest interjööris. 5 värv. ill

  8. Restorative Integral Support (RIS) for Older Adults Experiencing Co-Occurring Disorders

    Science.gov (United States)

    Larkin, Heather; MacFarland, Nicole S.

    2012-01-01

    The Restorative Integral Support (RIS) model is a whole person response that assists people to overcome adversity. The Adverse Childhood Experiences (ACE) Study conducted by Kaiser Permanente and the Centers for Disease Control and Prevention shows the association between stressors in childhood and multiple later-life health and social problems.…

  9. OSiRIS: a distributed Ceph deployment using software defined networking for multi-institutional research

    Science.gov (United States)

    McKee, Shawn; Kissel, Ezra; Meekhof, Benjeman; Swany, Martin; Miller, Charles; Gregorowicz, Michael

    2017-10-01

    We report on the first year of the OSiRIS project (NSF Award #1541335, UM, IU, MSU and WSU) which is targeting the creation of a distributed Ceph storage infrastructure coupled together with software-defined networking to provide high-performance access for well-connected locations on any participating campus. The projects goal is to provide a single scalable, distributed storage infrastructure that allows researchers at each campus to read, write, manage and share data directly from their own computing locations. The NSF CC*DNI DIBBS program which funded OSiRIS is seeking solutions to the challenges of multi-institutional collaborations involving large amounts of data and we are exploring the creative use of Ceph and networking to address those challenges. While OSiRIS will eventually be serving a broad range of science domains, its first adopter will be the LHC ATLAS detector project via the ATLAS Great Lakes Tier-2 (AGLT2) jointly located at the University of Michigan and Michigan State University. Part of our presentation will cover how ATLAS is using the OSiRIS infrastructure and our experiences integrating our first user community. The presentation will also review the motivations for and goals of the project, the technical details of the OSiRIS infrastructure, the challenges in providing such an infrastructure, and the technical choices made to address those challenges. We will conclude with our plans for the remaining 4 years of the project and our vision for what we hope to deliver by the projects end.

  10. Separation Properties of Wastewater Containing O/W Emulsion Using Ceramic Microfiltration/Ultrafiltration (MF/UF Membranes

    Directory of Open Access Journals (Sweden)

    Kanji Matsumoto

    2013-06-01

    Full Text Available Washing systems using water soluble detergent are used in electrical and mechanical industries and the wastewater containing O/W emulsion are discharged from these systems. Membrane filtration has large potential for the efficient separation of O/W emulsion for reuses of treated water and detergent. The separation properties of O/W emulsions by cross-flow microfiltration and ultrafiltration were studied with ceramic MF and UF membranes. The effects of pore size; applied pressure; cross-flow velocity; and detergent concentration on rejection of O/W emulsion and flux were systematically studied. At the condition achieving complete separation of O/W emulsion the pressure-independent flux was observed and this flux behavior was explained by gel-polarization model. The O/W emulsion tended to permeate through the membrane at the conditions of larger pore size; higher emulsion concentration; and higher pressure. The O/W emulsion could permeate the membrane pore structure by destruction or deformation. These results imply the stability of O/W emulsion in the gel-layer formed on membrane surface play an important role in the separation properties. The O/W emulsion was concentrated by batch cross-flow concentration filtration and the flux decline during the concentration filtration was explained by the gel- polarization model.

  11. Separation Properties of Wastewater Containing O/W Emulsion Using Ceramic Microfiltration/Ultrafiltration (MF/UF) Membranes

    Science.gov (United States)

    Nakamura, Kazuho; Matsumoto, Kanji

    2013-01-01

    Washing systems using water soluble detergent are used in electrical and mechanical industries and the wastewater containing O/W emulsion are discharged from these systems. Membrane filtration has large potential for the efficient separation of O/W emulsion for reuses of treated water and detergent. The separation properties of O/W emulsions by cross-flow microfiltration and ultrafiltration were studied with ceramic MF and UF membranes. The effects of pore size; applied pressure; cross-flow velocity; and detergent concentration on rejection of O/W emulsion and flux were systematically studied. At the condition achieving complete separation of O/W emulsion the pressure-independent flux was observed and this flux behavior was explained by gel-polarization model. The O/W emulsion tended to permeate through the membrane at the conditions of larger pore size; higher emulsion concentration; and higher pressure. The O/W emulsion could permeate the membrane pore structure by destruction or deformation. These results imply the stability of O/W emulsion in the gel-layer formed on membrane surface play an important role in the separation properties. The O/W emulsion was concentrated by batch cross-flow concentration filtration and the flux decline during the concentration filtration was explained by the gel- polarization model. PMID:24958621

  12. Rapid HIS, RIS, PACS Integration Using Graphical CASE Tools

    Science.gov (United States)

    Taira, Ricky K.; Breant, Claudine M.; Stepczyk, Frank M.; Kho, Hwa T.; Valentino, Daniel J.; Tashima, Gregory H.; Materna, Anthony T.

    1994-05-01

    We describe the clinical requirements of the integrated federation of databases and present our client-mediator-server design. The main body of the paper describes five important aspects of integrating information systems: (1) global schema design, (2) establishing sessions with remote database servers, (3) development of schema translators, (4) integration of global system triggers, and (5) development of job workflow scripts.

  13. Association Euratom - Risø National Laboratory, Technical University of Denmark - Annual Progress Report 2007

    DEFF Research Database (Denmark)

    Michelsen, Poul; Korsholm, Søren Bang; Juul Rasmussen, Jens

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the pla......The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction...... phased out during 2007. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2007....

  14. Ref2RIS: Importing Word-Processed Bibliographies into Bibliographic Management Software

    OpenAIRE

    Deborah Fitchett

    2012-01-01

    Many who would benefit the most from timesaving bibliographic managers hesitate to adopt the technology due to the difficulties in importing legacy bibliographies developed over years. Existing shortcuts rely on manual reformatting or on re-searching online databases for the records - often almost as laborious as retyping the references. Ref2RIS was developed to automate the task of converting a bibliography in specific citation styles from common word processing document formats into the wid...

  15. Changes of workflow in a radiolocigal department with RIS, PACS and flatpanel detectors implementation

    International Nuclear Information System (INIS)

    Imhof, H.; Dirisamer, A.; Fischer, H.; Grampp, S.; Heiner, L.; Kaderk, M.; Krestan, C.; Kainberger, F.

    2002-01-01

    Implementation of radiological information systems (RIS) and picture archiving and communicating systems (PACS) results in significant changes of workflow in a radiological department. Additional connection with flatpanel detectors leads to a shortening of the work process. RIS and PACS implementation alone reduces the complete workflow by 21-80%. With flatpanel technology the image production process is further shortened by 25-30%. The workflow-steps are changed from original 17-12 with the implementation of RIS and PACS and to 5 with the integrated use of flatpanels.This clearly recognizable advantages in the workflow need an according financial investment. Several studies could show that the capitalisationfactor calculated over eight years is positive, with a gain range between 5-25%. Whether the additional implementation of flatpanel detectors results also in a positive capitalisation over the years, cannot be estimated exactly, at the moment, because the experiences are too short. Particuarly critical are the interfaces, which needs a constant quality control. Our flatpanel detector-system is fixed, special images - as we have them in about 3-5% of all cases - need still conventional filmscreen or phosphorplate-systems. Full-spine and long-leg examinations cannot be performed with sufficient exactness. Without any questions implementation of integrated RIS, PACS and flatpanel detector-system needs excellent training of the employees, because of the changes in workflow etc. The main profits of such an integrated implementation are an increase in quality in image and report datas, easier handling - there are almost no more cassettes necessary - and excessive shortening of workflow. (orig.) [de

  16. Effects of quenched impurities on surface diffusion, spreading, and ordering of O/W(110)

    DEFF Research Database (Denmark)

    Nikunen, P.; Vattulainen, Ilpo Tapio; Ala-Nissila, T.

    2002-01-01

    We study how quenched impurities affect the surface diffusion and ordering of strongly interacting adsorbate atoms on surfaces. To this end, we carry out Monte Carlo simulations for a lattice-gas model of O/W(110), including small concentrations of immobile impurities which block their adsorption...

  17. Preparation, characterization and bioavailability by oral administration of O/W curcumin nanoemulsions stabilized with lysophosphatidylcholine.

    Science.gov (United States)

    Chávez-Zamudio, Rubi; Ochoa-Flores, Angélica A; Soto-Rodríguez, Ida; Garcia-Varela, Rebeca; García, Hugo Sergio

    2017-09-20

    Curcumin is the main and most abundant bioactive component in Curcuma longa L. with documented properties in the prevention and treatment of chronic degenerative and infectious diseases. However, curcumin has low solubility in aqueous media, hence low bioavailability when administered orally. The use of nanoemulsions as carriers can provide a partial solution to bioavailability restrictions. In our study, O/W nanoemulsions of curcumin were prepared using lysophosphatidylcholine, a phospholipid with proven emulsification capacity; nevertheless, such qualities have not been previously reported in the preparation of nanoemulsions. Lysophosphatidylcholine was obtained by enzymatic removal of one fatty acid residue from phosphatidylcholine. The objective of our work was to formulate stable curcumin nanoemulsions and evaluate their bioavailability in BALB/c mice plasma after oral administration. Formulated nanoemulsions had a droplet size mean of 154.32 ± 3.10 nm, a polydispersity index of 0.34 ± 0.07 and zeta potential of -10.43 ± 1.10 mV; stability was monitored for 12 weeks. Lastly, in vivo pharmacokinetic parameters, using BALB/c mice, were obtained; namely, C max of 610 ± 65.0 μg mL -1 and T max of 2 h. Pharmacokinetic data revealed a higher bioavailability of emulsified as opposed to free curcumin. Research regarding other potential emulsifiers that may provide better health benefits and carry nano-encapsulated bioactive compounds more effectively, is necessary. This study provides important data on the preparation and design of nanoencapsulated Curcumin using lysophosphatidylcholine as an emulsifier.

  18. The modified respiratory index score (RIS) guides resource allocation in acute bronchiolitis.

    Science.gov (United States)

    Chong, Shu-Ling; Teoh, Oon Hoe; Nadkarni, Nivedita; Yeo, Joo Guan; Lwin, Zaw; Ong, Yong-Kwang Gene; Lee, Jan Hau

    2017-07-01

    Bronchiolitis is a common disease in early childhood with increasing healthcare utilization. We aim to study how well a simple and improved respiratory score (the modified Respiratory Index Score [RIS]) would perform when predicting for a warranted admission. This is an observational prospective study, from June 2015 to December 2015 in a paediatric emergency department (ED) of a large tertiary hospital in Singapore. We included children aged less than 2 years old, presenting with typical symptoms and signs of bronchiolitis but excluded children with four or more previous wheezes, a gestation of hydration, and a hospital stay of 2 days or more. Among 1,818 patients, the median age was 10.8 months (IQR 7.2-15.9). The median modified RIS score was 4.0 (IQR 3.0-5.0). A total of 19 (1.0%) children required respiratory support, 101 (5.6%) received intravenous hydration, and 571 (31.4%) required a hospital stay of 2 days or more. After adjusting for age and duration of illness, a modified RIS score of >4 predicted significantly for a warranted admission (adjusted Odds Ratio: 3.28, 95% confidence interval: 2.62-4.12). The association remained significant among children presenting with their first wheeze. This simple respiratory tool predicts for the need for respiratory support, intravenous hydration, and a significant hospital stay of 2 days or more. Pediatr Pulmonol. 2017; 52:954-961. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  19. The guarantee of the consistency of patient information through modality worklist among PACS, RIS and imaging equipments

    International Nuclear Information System (INIS)

    Luo Min; Peng Chenglin; Wang Xiaolin; Luo Song; Lei Wenyong; Wang Kang; Wang Xuejian; Wen Hongyu; Wu Hongxing

    2003-01-01

    Objective: To realize the consistency of patient information through modality worklist among picture archiving and communication system (PACS), radiology information systems (RIS), and imaging equipments. Methods: Many digital modalities including GE Signa 1.5 T MR system, digital mammography, Agfa digital radiography, computed radiography, GE CT, and etc were installed in our hospital. Since the GE PACS system was in English version, the images were saved and the information was managed to PACS without a truly worklist. Two months later, while still using the previous PACS, the consistency of patient information was resolved through modality worklist by adopting the international advanced approach to realize thread worklist of digital imaging and communication in medicine. The information in Chinese will be transformed into information in English in RIS system and saved as the English information to worklist. Results: After the implementation and integration of PACS and RIS was achieved in my hospital, the consistency of patient information was guaranteed through modality worklist between RIS and imaging equipments and the first-rate effect was acquired. The patient information could be checked, edited, and created by using the Chinese RIS system on all diagnostic workstations. Conclusion: The consistency of patient information through modality worklist was realized among PACS, RIS, and imaging equipments, yet at present, the question of guarantee the consistency of patient information must be thought over in PACS building

  20. Stability of O/W Emulsion with Synthetic Perfumes Oxidized by Singlet Oxygen

    Directory of Open Access Journals (Sweden)

    Naoki Watabe

    2013-01-01

    Full Text Available We prepared O/W emulsion composed of a synthetic perfume, n-dodecane, protoporphyrin IX disodium salt (PpIX-2Na, sodium dodecyl sulfate, and water and investigated oxidative decomposition of the synthetic perfume in the emulsion and change in the stability of the emulsion by singlet oxygen (1O2 generated by photosensitization of PpIX-2Na. We used eugenol, linalool, benzyl acetate, α-ionone, α-hexylcinnamaldehyde, and d-limonene as a synthetic perfume. The stability of the O/W emulation including eugenol and linalool significantly decreased with increasing light irradiation time. The decrease in the emulsion stability may be attributable to oxidative decomposition of eugenol and linalool by 1O2 and enlargement of the oil droplet size.

  1. Risøs årsrapport 2004. Opfølgning på planerne for året 2004

    DEFF Research Database (Denmark)

    2005-01-01

    Risøs årsrapport 2004 er en opfølgning på planerne for Risøs virksomhed i 2003. Risøs bestyrelse skal som led i resultatkontrakten med Ministeriet for Videnskab, Teknologi og Udvikling aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav.Nærværende rapport indeholder data til brug...

  2. Association Euratom - Risø National Laboratory annual progress report 2002

    DEFF Research Database (Denmark)

    2003-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction withthe plasma equilibrium and particles....... The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology cover investigations ofradiation damage of fusion reactor materials. These activities contribute to the Next Step......, the Long-term and the Underlying Fusion Technology programme....

  3. Association Euratom - Risø National Laboratory annual progress report 2005

    DEFF Research Database (Denmark)

    2006-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction withthe plasma equilibrium and particles....... The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology cover investigations ofradiation damage of fusion reactor materials. These activities contribute to the Next Step......, the Long-term and the Underlying Fusion Technology programme. A summary is presented of the results obtained in the Research Unit during 2005....

  4. Association Euratom - Risø National Laboratory annual progress report 2000

    DEFF Research Database (Denmark)

    Lynov, Jens-Peter; Singh, Bachu Narain

    2001-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics group has activities within development of laser diagnostics forfusion plasmas and studies of nonlinear dynamical...... processes related to turbulence and turbulent transport in the edge region of magnetised fusion plasmas. The activities in technology cover investigations of radiation damage of fusion reactor materials. These activities contribute to the Next Step, the Long-term and the Underlying Fusion Technology...

  5. Association Euratom - Risø National Laboratory annual progress report 2003

    DEFF Research Database (Denmark)

    2004-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction withthe plasma equilibrium and particles....... The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology cover investigations ofradiation damage of fusion reactor materials. These activities contribute to the Next Step......, the Long-term and the Underlying Fusion Technology programme. A summary is presented of the results obtained in the Research Unit during 2003....

  6. Association Euratom - Risø National Laboratory annual progress report 2001

    DEFF Research Database (Denmark)

    2002-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction withthe plasma equilibrium and particles....... The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology cover investigations ofradiation damage of fusion reactor materials. These activities contribute to the Next Step......, the Long-term and the Underlying Fusion Technology programme. A summary is presented of the results obtained in the Research Unit during 2001....

  7. Association Euratom - Risø National Laboratory annual progress report 1999

    DEFF Research Database (Denmark)

    2001-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics group has activities within development of laser diagnostics forfusion plasmas and studies of nonlinear dynamical...... processes related to electrostatic turbulence and turbulent transport in magnetised plasmas. The activities in technology cover investigations of radiation damage of fusion reactor materials. Theseactivities contribute to the Next Step, the Long-term and the Underlying Fusion Technology programme. A summary...

  8. Implantation, evaluation and improvement of the diffusion code package developed by the RIS0 Research Center

    International Nuclear Information System (INIS)

    Koide, M.C.M.

    1983-01-01

    The evaluation and improvement of the diffusion code package developed by the RIS0 Research Center of Denmark have been performed. The improvements made in the package consisted in the presentation of their manuals. In order to reduce the process time of the codes an analitical boundary condition capable of representing the effects of the baffle and the reflector on the flux distribution has been calculated. Such boundary condition was obtained using a one-dimensional medium in the framework of the two group diffusion theory. The results showed that the application of this boundary condition produces very accurate results and an appreciable economy of processing time. (author) [pt

  9. Formulation and optimization of pH sensitive drug releasing O/W emulsions using Albizia lebbeck L. seed polysaccharide.

    Science.gov (United States)

    Varma, Chekuri Ashok Kumar; Jayaram Kumar, K

    2018-04-30

    Smart polymers, one of the class of polymers with extensive growth in the last few decades due to their wide applications in drug targeting and controlled delivery systems. With this in mind, the aim of the present study is to design and formulate smart releasing o/w emulsion by using Albizia lebbeck L. seed polysaccharide (ALPS). For this purpose, the physicochemical and drug release characteristics like emulsion capacity (EC), emulsion stability (ES), viscosity, microscopy, zeta potential, polydispersity index (PDI) and in-vitro drug release were performed. The EC and ES values were found to increase with an increased concentration of ALPS. The emulsion formulations were statistically designed by using 3 2 full factorial design. All the emulsions showed a shear-thinning behavior. The zeta potential and polydispersity index were found to be in the range of -35.83 mV to -19.00 mV and 0.232-1.000 respectively. Further, the percent cumulative drug release of the emulsions at 8 h was found to be in the range of 30.19-82.65%. The drug release profile exhibited zero order release kinetics. In conclusion, the ALPS can be used as a natural emulsifier and smart polymer for the preparation of pH sensitive emulsions in drug delivery systems. Copyright © 2018 Elsevier B.V. All rights reserved.

  10. Time analysis for optimization of radiology workflow in conventional radiology during RIS-PACS-integration

    Science.gov (United States)

    Falkensammer, Peter; Soegner, Peter I.; zur Nedden, Dieter

    2002-05-01

    The integration of RIS-PACS systems in radiology units are intended to reduce time consumption in radiology workflow and thus to increase radiologist productivity. Along with the RIS-PACS integration at the University Hospital Innsbruck we analyzed workflow from patient admission to release of final reports before implementation. The follow up study after six months of the implementation is currently in work. In this study we compared chest to skeletal x-ray examinations in 969 patients before the implementation. Drawing the admission-to-release-of-final-report period showed a two-peak diagram with the first peak corresponding to a release of final results on the same day and the second peak to a release on the following day. In the chest x-ray group, 57% were released the same day (mean value 4:02 hours) and 43% the next day (mean value 21:47 hours). Looking at the skeletal x-rays 40% were released the same day (mean value 3:58 hours) and 60% were released the next day (mean value 21:05 hours). Summarizing the results we should say, that the average chest x-ray requires less time than an skeletal x-ray, due to the fact that a greater percentage of reports is released the same day. The most important result is, that the most time consuming workstep is the exchange of data media between radiologist and secretary with at least 5 hours.

  11. High-Resolution Imaging System (HiRIS) based on H9500 PSPMT

    International Nuclear Information System (INIS)

    Trotta, C.; Massari, R.; Trinci, G.; Palermo, N.; Boccalini, S.; Scopinaro, F.; Soluri, A.

    2008-01-01

    The H8500 PhotoMultiplier Tube (PMT) from Hamamatsu has been used in the last years to assemble several scintigraphic devices in order to achieve high-resolution gamma cameras. If the detector is coupled to discrete scintillator with millimetric pixel size, the resulting charge distribution that emerges is not properly sampled by its anodes (6x6 mm 2 ). The new position sensitive PMT H9500, with its 3x3 mm 2 anodes, allows a better charge distribution sampling, improving both spatial resolution and linearity of the system. In this paper, we investigate the imaging performances of the H9500 PMT coupled with a CsI(Tl) array having 1 mm pixel size and compare the results with the same scintillator coupled with H8500 PMT. A portable imaging system named HiRIS (High-Resolution Imaging System) was then realized using a miniaturized readout electronic. Thanks to its lightness, it can be easily used in Medical Imaging. We used HiRIS, together with a rotating system, to carry out a tomographic reconstruction of the biodistribution of a radiopharmaceutical in rats

  12. Radiological reporting system developed with FileMakerPro. Cooperation with HIS, RIS, and PACS

    International Nuclear Information System (INIS)

    Kawakami, Satoshi

    2004-01-01

    This article briefly describes our original radiological reporting system. This system was developed with the widely used database software FileMakerPro (ver 5.5). The reporting system can obtain information about patients and examinations from a radiology information system (RIS) by the Open DataBase Connectivity (ODBC) technique. By clicking the button on the reporting system, the corresponding Digital Imaging and Communications in Medicine (DICOM) images can be displayed on a picture archiving and communication system (PACS) workstation monitor. Reference images in JPEG format can be easily moved from PACS to the reporting system. Reports produced by the reporting system are distributed to the hospital information system (HIS) in Portable Document Format (PDF), through another web server. By utilizing the capacity of FileMakerPro, the human-machine interface of the system has been able to be improved easily. In addition, cooperation with HIS, RIS, and PACS could be constructed. Therefore, this original system would contribute to increasing the efficiency of radiological diagnosis. (author)

  13. Association Euratom - Risø National Laboratory annual progress report for 1998

    DEFF Research Database (Denmark)

    Lynov, Jens-Peter; Singh, Bachu Narain

    1999-01-01

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics group has activities within development of laser diagnostics forfusion plasmas and studies of nonlinear dynamica....... The technology activities also include contibutions to macrotasks, which are carried out under the programme for Socio-Economic Research on Fusion(SERF). A summary is presented of the results obtained in the Research Unit during 1998.......The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory covers work in fusion plasma physics and in fusion technology. The fusion plasma physics group has activities within development of laser diagnostics forfusion plasmas and studies of nonlinear dynamical...... processes related to electrostatic turbulence and turbulent transport in magnetised plasmas. The activities in technology cover investigations of radiation damage of fusion reactor materials. Theseactivities contribute to the Next Step, the Long-term and the Underlying Fusion Technology programme...

  14. Toward Design, Modelling and Analysis of Dynamic Workflow Reconfigurations - A Process Algebra Perspective

    DEFF Research Database (Denmark)

    Mazzara, M.; Abouzaid, F.; Dragoni, Nicola

    2011-01-01

    This paper describes a case study involving the dynamic re- conguration of an oce work ow. We state the requirements on a sys- tem implementing the work ow and its reconguration, and describe the system's design in BPMN. We then use an asynchronous -calculus and Web1 to model the design and to ve......This paper describes a case study involving the dynamic re- conguration of an oce work ow. We state the requirements on a sys- tem implementing the work ow and its reconguration, and describe the system's design in BPMN. We then use an asynchronous -calculus and Web1 to model the design...

  15. Long-term stability investigation of o/w cosmetic creams stabilized by mixed emulsifier

    Directory of Open Access Journals (Sweden)

    Đekić Ljiljana M.

    2012-01-01

    Full Text Available Polyglyceryl-3 Methylglucose Distearate (PMD, TEGO® Care 450, Evonik, Germanyis natural (vegetable, non-ionic, PEG-free emulsifier, suitable for the formulation of oil-in-water (o/w cosmetic creams and lotions. The oil phase components can be selected from mineral oils, vegetable oils and synthetic esters, which enable different variety of application profile of these emulsions. It is possible to prepare stable emulsions using low-level concentration of the PMD (2-3% if lotions contain 10-25%, and creams 20-40 % of oil phase. PMD forms liquid crystal structure in the presence of stearic acid, glyceryl stearate, fatty alcohols, or their combinations. The o/w type creams, stabilized by these mixed emulsifiers are complex, multiphase systems. The aim of this work was to formulate, prepare and investigate long-term stability of the o/w creams stabilized by mixed emulsifier polyglyceryl-3 methylglucose distearate/glyceryl stearate/stearyl alcohol, depending on concentration levels of PMD (2% or 3% and oil:water phase ratio (20:80 and 30:70. The samples were prepared using hot/hot procedure. Organoleptic inspection, centrifugation test, rheological measurements, electric conductivity and pH value measurements were performed 72 h, 1, 3, 12 and 30 months after preparation. The prepared samples were apparently white and homogenous creams. The consistency and homogeneity were preserved after centrifugation of the creams after 72 h, 1, 3, 12 and 30 months storage, and no phase separation could be detected. The pH values obtained are suitable for skin application. Conductivity values (25.2-63.7 μS cm1, 72 h after preparation were attributed to the multiple phase o/w emulsions with high percentages of fixed water. Results of the rheological measurements have shown that the investigated creams exhibited non-Newtonian thyxotropic behavior. The concentration of emulsifier PMD and oil phase content had an influence on the rheological parameters of investigated

  16. Expression of bvg-repressed genes in Bordetella pertussis is controlled by RisA through a novel c-di-GMP signaling pathway

    Science.gov (United States)

    The BvgAS two component system of Bordetella pertussis controls virulence factor expression. In addition, BvgAS controls expression of the bvg-repressed genes through the action of the repressor, BvgR. The transcription factor RisA is inhibited by BvgR, and when BvgR is not expressed RisA induces th...

  17. Computational study of the Risø-B1-18 airfoil with a hinged flap providing variable trailing edge geometry

    DEFF Research Database (Denmark)

    Troldborg, Niels

    2005-01-01

    A comprehensive computational study, in both steady and unsteady flow conditions, has been carried out to investigate the aerodynamic characteristics of the Risø-B1.18 airfoil equipped with variable trailing edge geometry as produced by a hinged flap. The function of such flaps should...... on the baseline airfoil showed excellent agreement with measurements on the same airfoil with the same specified conditions. Furthermore, a more widespread comparison with an advanced potential theory code is presented. The influence of various key parameters, such as flap shape, flap size and oscillating...... frequencies, was investigated so that an optimum design can be suggested for application with wind turbine blades. It is concluded that a moderately curved flap with flap chord to airfoil curve ratio between 0.05 and 0.10 would be an optimum choice....

  18. Hematologic and plasma chemistry RIs for cultured Striped catfish (Pangasius hypophthalmus) in recirculating aquaculture systems.

    Science.gov (United States)

    Galagarza, Oscar A; Kuhn, David D; Smith, Stephen A; Hrubec, Terry C

    2017-09-01

    Striped catfish (Pangasius hypophthalmus) is a valuable aquaculture fish species produced primarily in Southeast Asia. In the United States, it is bred as an ornamental species. Striped catfish has high productivity and great demand in numerous countries around the world, yet little is known about its normal physiology. The objective of this study was to establish hematologic and blood chemistry RIs for healthy juvenile Striped catfish. Blood samples were collected from 70 Striped catfish raised in recirculating aquaculture systems. Whole blood and plasma samples were analyzed for multiple hematologic and chemistry variables using standard techniques. The RIs for hematology were as follows: PCV 23.5-35.9%, MCV 106.3-156.6 fL, RBC count 1.79-2.75 × 10 6 cells/μL, thrombocytes 26,318-73,333 cells/μL, total WBC count 36,294-94,286 cells/μL, total lymphocytes 18,997-59,998 cells/μL, small lymphocytes 13,763-51,490 cells/μL, large lymphocytes 715-21,200 cells/μL, granulocytes 4504-18,291 cells/μL, and monocytes 0-7549 cells/μL. Plasma chemistry RIs were the following: ALP 32.7-74.6 U/L, AST 20.3-1235.8 U/L, sodium 135.2-147.7 mmol/L, potassium 3.3-5.0 mmol/L, chloride 120.1-133.6 mmol/L, calcium 2.7-3.6 mmol/L, magnesium 0.9-1.3 mmol/L, phosphorous 1.4-2.7 mmol/L, glucose 4.6-7.6 mmol/L, cholesterol 2.8-5.3 mmol/L, total protein 30-42 g/L, albumin 7-11 g/L, globulin 22-32 g/L, albumin:globulin ratio 0.27-0.37, creatinine 0-8 μmol/L, and osmolality 251.8-327.9 mOsm/kg. Reference intervals reported here can help veterinarians and fish health specialists monitor the health status of Striped catfish under recirculating aquaculture conditions for research, exhibition, and production purposes. © 2017 American Society for Veterinary Clinical Pathology.

  19. Increase in productivity by implementation of RIS and PACS throughout a clinic: a case study

    International Nuclear Information System (INIS)

    Nissen-Meyer, S.; Holzknecht, N.; Wieser, B.; Francke, M.; Kuettner, B.; Weber, J.; Reiser, M.; Adelhard, K.; Villain, S.

    2002-01-01

    Problem. How are improvements in productivity in connection with RIS/PACS to be defined? What do they cost? To limit the problem to the relevant topics, we first describe the objectives of a radiology department and the identified bottlenecks in the workflow. How to define and assess the improvements is discussed.Methods. The case in question for this study is the RIS/PACS project at the ''Klinikum der Universitaet Muenchen, Campus Grosshadern''. The goals of the project and its present status are reviewed. The project is not yet completed, so this is a ''midterm'' report.Results and discussion. We describe the status of the achieved and not yet achieved goals and of the eliminated bottlenecks. On the plus side, for example, nearly 100% of all digitally generated images (except mammogramms) are digitally archived. They are accessible to the same percentage in radiology via PACS and in the hospital via the webbased intranet image distribution system when needed. In some radiology areas, such as multislice CT, already the reporting can no longer be performed without softcopy image interpretation. However, the full elimination of hardcopy images is still not reality, since the distribution to DICOM viewers for selected requesters with demands for almost reporting quality, high cost image displays is still in the testphase. To reduce film costs, images are being printed on a high resolution paper printer in addition to the intranet distribution during this transition period. On the negative side, due to a lack of job positions in the transcription rooms, about 40% of the reports are still being handwritten by radiologists. Furthermore, the dictated and transcribed reports are usually still not available early enough in the RIS and thereby in the intranet report distribution of the hospital. Here only a speech recognition system can remedy the situation. As soon as this problem is solved and the image distribution to the DICOM viewers works routinely, the reports and

  20. Risøs årsrapport 2005. Opfølgning på planerne for året 2005

    DEFF Research Database (Denmark)

    2006-01-01

    Risøs årsrapport 2005 er en opfølgning på planerne for Risøs virksomhed i 2005. Risøs bestyrelse skal som led i resultatkontrakten med Ministeriet for Videnskab, Teknologi og Udvikling aflægge årlige rapporter om opfyldelsen af de fastlagte resultatkrav.Nærværende rapport indeholder data til brug...... for denne vurdering. Derudover gives et billede af Risøs økonomi og faglige aktiviteter, der relateres til Risøs mission, vision og strategi. Rapportering af årets resultater er baseret på det interneplanlægnings- og opfølgningssystem, og rapporten er opbygget efter Økonomistyrelsens nye koncept...... for årsrapporter....

  1. The RITA spectrometer at Risø - Design considerations and recent results

    DEFF Research Database (Denmark)

    Clausen, K.N.; McMorrow, D.F.; Lefmann, K.

    1998-01-01

    In the new cold triple axis spectrometer RITA at Riso we have improved the front end by extensive use of state of the art optical elements and better shielding material. The analyser system is situated in one large open tank and consists of seven individually orientable PC(002) crystal analyser b...... by a study of the spin fluctuations in the high T-c superconductor La1.83Sr0.17CuO4. (C) 1998 Elsevier Science B.V. All rights reserved....

  2. Encapsulation of carotenoids extracted from halophilic Archaea in oil-in-water (O/W) micro- and nano-emulsions.

    Science.gov (United States)

    Chaari, Marwa; Theochari, Ioanna; Papadimitriou, Vassiliki; Xenakis, Aristotelis; Ammar, Emna

    2018-01-01

    Carotenoids extracted from halophilc Archaea have potential health benefits. Their poor water-solubility and low bioavailability is a challenge to their incorporation into foods. The aim of this work was the carotenoids encapsulation into two oil-in-water (O/W) dispersions, to increase their use as functional food applications. A nanoemulsion produced by high pressure homogenization and a spontaneously formed microemulsion were conceived. The limonene was the dispersed oil phase, and mixtures of Triton X-100/Tween-80 (3:1) as emulsifiers and of water/glycerol (2:1) as the continuous aqueous phase. The microemulsion monophasic area was determined through the pseudo-ternary phase diagram. Dynamic Light Scattering was used for the structural characterization of the nano- and micro-emulsions in the presence of the carotenoids. Moreover, the radical scavenging activity of the encapsulated carotenoids was examined by Electron Paramagnetic Resonance spectroscopy. The results confirmed the delivery systems design effectiveness to encapsulate and stabilize the carotenoids for food applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Development of pulsed stimulation and Photon Timer attachments to the Risø TL/OSL reader

    DEFF Research Database (Denmark)

    Lapp, Torben; Jain, Mayank; Ankjærgaard, Christina

    2009-01-01

    in the OSL/IRSL process, a Photon Timer attachment to the Risø reader has been developed which measures data at 100 ps resolution. Furthermore a post-processing program has been developed to present the data in a compressed 3D form that gives a useful overview of the data before further analysis of relevant...

  4. Mesoscale modelling in China: Risø DTU numerical wind atlas calculation for NE China (Dongbei)

    DEFF Research Database (Denmark)

    Badger, Jake; Larsén, Xiaoli Guo; Hahmann, Andrea N.

    of the wind resource for Dongbei south of 50oN. The results of the numerical wind atlas show a wind resource over the region of interest modulated mainly by topographic features. These are principally elevated terrain features, giving high resources on exposed ridges and lower resources adjacent to the low......This document reports on the methods and findings of project “A01 Mesoscale Modelling”, part of the CMA component of the Wind Energy Development (WED) programme, focusing mainly on the methods and work undertaken by Risø DTU. The KAMM/WAsP methodology for numerical wind atlas calculation....... The major new aspects of the project were the large number of KAMM/WAsP sensitivity studies, comparison with WRF, and the CMA’s numerical wind atlas method (WERAS). Additionally, the reliability of the input data for the methodology, and the wave-number spectra properties of the output data were...

  5. Sintetização de imagens de íris com ruído

    OpenAIRE

    Gaspar, Miguel Alexandre de Campos

    2009-01-01

    O recurso a tecnologia biométrica está a revolucionar a forma como nos identificamos. Ao contrário de códigos, passwords, cartões ou chaves, a biometria permite uma identificação substancialmente mais segura e prática, uma vez que identifica o utilizador a partir das suas características físicas únicas e intransmissíveis, como a impressão digital, a íris, a voz ou a face. Com a evolução da biometria existe a necessidade de criar e testar novos algoritmos, mas existe um inconveniente, que e a...

  6. Calculation Of Aerosol Transport Efficiency For The Airborne Radioiodine Monitoring System - ''RIS125''

    International Nuclear Information System (INIS)

    Kravchik, T.; Levinson, L.; Mazor, Y.; Dolev, E.; German, U.

    1999-01-01

    Radioactive iodine is a typical fission product in nuclear power reactors. Of the many iodine isotopes that can be generated in nuclear reactors only four are considered as radiobiological significant. These are: 125 1 (T 1/2 =60 days), '1 31 I (T 1/2 =8d), 133 I (T 1/2 =21h) and I35 I (T 1/2 7h). The chemical forms that have been identified in heavy water reactors are I 2 (elemental), organic iodides (CH 3 I), Inorganic iodides (HOI, HI) and LiI. Radioiodine is, generally, released as a gas but can be adsorbed on air particulates to form radioiodine contained aerosols. Therefore. its monitoring has to include both gas and aerosol sampling. A new monitoring system, RIS (Radioactive iodine Sampler), has been developed at the NRCN to monitor radioactive iodine (gas and aerosol) on-line in workplaces. This system samples radioiodine at a 60 L/min rate through a transport line connected to a filter holder. The filter consists of a cartridge containing activated charcoal with TEDA for iodine gas adsorption with a membrane for aerosols' retention in from of it. The radioiodine filter cartridge (F and J product code: TE2C) has a diameter of 2 1/4 inch and height of 1 inch . The gas adsorbent is coconut shell carbon type activated charcoal with 5% (by weight) TEDA impregnation and has 30x50 mesh size. This paper presents the aerosols' sampling characteristics of the RIS system including their transport in the sampling line and filter holder. The adsorption of iodine gas on the transport system components is negligible

  7. Dispersion Stability of O/W Emulsions with Different Oil Contents Under Various Freezing and Thawing Conditions.

    Science.gov (United States)

    Katsuki, Kazutaka; Miyagawa, Yayoi; Nakagawa, Kyuya; Adachi, Shuji

    2017-07-01

    Freezing and thawing of oil-in-water (O/W) emulsion-type foods bring about oil-water separation and deterioration; hence, the effects of freezing and thawing conditions on the destabilization of O/W emulsions were examined. The freezing rate and thawing temperature hardly affected the stability of the O/W emulsion. O/W emulsions having different oil fractions were stored at temperatures ranging from -30 to -20 °C and then thawed. The stability after thawing depended on the storage temperature, irrespective of the oil fraction of the emulsion. A good correlation was found between the time at which the stability began to decrease and the time taken for the oil to crystalize. These results indicated that the dominant cause for the destabilization of the O/W emulsion during freezing and thawing is the crystallization of the oil phase and that the effects of the freezing and thawing rates on the stability are insignificant. © 2017 Institute of Food Technologists®.

  8. Effective Surfactants Blend Concentration Determination for O/W Emulsion Stabilization by Two Nonionic Surfactants by Simple Linear Regression.

    Science.gov (United States)

    Hassan, A K

    2015-01-01

    In this work, O/W emulsion sets were prepared by using different concentrations of two nonionic surfactants. The two surfactants, tween 80(HLB=15.0) and span 80(HLB=4.3) were used in a fixed proportions equal to 0.55:0.45 respectively. HLB value of the surfactants blends were fixed at 10.185. The surfactants blend concentration is starting from 3% up to 19%. For each O/W emulsion set the conductivity was measured at room temperature (25±2°), 40, 50, 60, 70 and 80°. Applying the simple linear regression least squares method statistical analysis to the temperature-conductivity obtained data determines the effective surfactants blend concentration required for preparing the most stable O/W emulsion. These results were confirmed by applying the physical stability centrifugation testing and the phase inversion temperature range measurements. The results indicated that, the relation which represents the most stable O/W emulsion has the strongest direct linear relationship between temperature and conductivity. This relationship is linear up to 80°. This work proves that, the most stable O/W emulsion is determined via the determination of the maximum R² value by applying of the simple linear regression least squares method to the temperature-conductivity obtained data up to 80°, in addition to, the true maximum slope is represented by the equation which has the maximum R² value. Because the conditions would be changed in a more complex formulation, the method of the determination of the effective surfactants blend concentration was verified by applying it for more complex formulations of 2% O/W miconazole nitrate cream and the results indicate its reproducibility.

  9. Hydrophilic Surface Modification of PDMS Microchannel for O/W and W/O/W Emulsions

    Directory of Open Access Journals (Sweden)

    Shazia Bashir

    2015-09-01

    Full Text Available A surface modification method for bonded polydimethylsiloxane (PDMS microchannels is presented herein. Polymerization of acrylic acid was performed on the surface of a microchannel using an inline atmospheric pressure dielectric barrier microplasma technique. The surface treatment changes the wettability of the microchannel from hydrophobic to hydrophilic. This is a challenging task due to the fast hydrophobic recovery of the PDMS surface after modification. This modification allows the formation of highly monodisperse oil-in-water (O/W droplets. The generation of water-in-oil-in-water (W/O/W double emulsions was successfully achieved by connecting in series a hydrophobic microchip with a modified hydrophilic microchip. An original channel blocking technique to pattern the surface wettability of a specific section of a microchip using a viscous liquid comprising a mixture of honey and glycerol, is also presented for generating W/O/W emulsions on a single chip.

  10. Transdermal delivery of hydrophobic and hydrophilic local anesthetics from o/w and w/o Brij 97-based microemulsions

    DEFF Research Database (Denmark)

    Junyaprasert, Varaporn Buraphacheep; Boonme, Prapaporn; Songkro, Sarunyoo

    2007-01-01

    To characterize the physicochemical properties of drug-loaded oil-in-water (o/w) and water-in-oil (w/o) Brij 97-based microemulsions in comparison to their blank counterparts and to investigate the influence of microemulsion type on in vitro skin permeation of model hydrophobic drugs...

  11. extrap: Software to assist the selection of extrapolation methods for moving-boat ADCP streamflow measurements

    Science.gov (United States)

    Mueller, David S.

    2013-01-01

    Selection of the appropriate extrapolation methods for computing the discharge in the unmeasured top and bottom parts of a moving-boat acoustic Doppler current profiler (ADCP) streamflow measurement is critical to the total discharge computation. The software tool, extrap, combines normalized velocity

  12. Effect of gelation of inner dispersed phase on stability of (w1/o/w2) multiple emulsions

    NARCIS (Netherlands)

    Oppermann, A.K.L.; Renssen, M.; Schuch, A.; Stieger, M.A.; Scholten, E.

    2015-01-01

    The use of water-in-oil-in-water (w1/o/w2) multiple emulsions offers a method for the reduction of oil in foods. In this study we investigated the influence of osmotic pressure tailoring and gelation of the inner dispersed w1 water droplets on the stability and yield of multiple emulsions. Yield is

  13. Physical characteristic and irritation index of Syzigium aromaticum essential oil in O/W and W/O creams

    Science.gov (United States)

    Safriani, R.; Sugihartini, N.; Yuliani, S.

    2017-11-01

    Essential oil of Syzigium aromaticum has been formulated in O/W and W/O creams as anti-inflammatory dosage form. The purpose of this study was to evaluate the physical characteristic and irritation index of S. aromaticum essential oil in O/W and W/O creams. The creams were made by fusion method. The creams then were evaluated the physical characteristic including pH, viscosity, spreadability and adhesivity. The irritation index was obtained by irritation skin test in male rabbit. The results showed that the W/O and O/W creams have the value of pH: 6.3 and 6.27; spreadability: 3,18 and 4.17 cm2; adhesivity: 5.59 and 0.07 minutes; viscosity: 4.43 and 2.88 Pa.S, respectively. The irritation test showed that the control enhancer caused mild irritation in both of W/O and O/W creams. These findings indicated that type of cream might influence the physical characteristic and irritation index of S. aromaticum essential oil cream.

  14. Validation of a 10-item care-related regret intensity scale (RIS-10) for health care professionals.

    Science.gov (United States)

    Courvoisier, Delphine S; Cullati, Stéphane; Haller, Chiara S; Schmidt, Ralph E; Haller, Guy; Agoritsas, Thomas; Perneger, Thomas V

    2013-03-01

    Regret after one of the many decisions and interventions that health care professionals make every day can have an impact on their own health and quality of life, and on their patient care practices. To validate a new care-related regret intensity scale (RIS) for health care professionals. Retrospective cross-sectional cohort study with a 1-month follow-up (test-retest) in a French-speaking University Hospital. A total of 469 nurses and physicians responded to the survey, and 175 answered the retest. RIS, self-report questions on the context of the regret-inducing event, its consequences for the patient, involvement of the health care professionals, and changes in patient care practices after the event. We measured the impact of regret intensity on health care professionals with the satisfaction with life scale, the SF-36 first question (self-reported health), and a question on self-esteem. On the basis of factor analysis and item response analysis, the initial 19-item scale was shortened to 10 items. The resulting scale (RIS-10) was unidimensional and had high internal consistency (α=0.87) and acceptable test-retest reliability (0.70). Higher regret intensity was associated with (a) more consequences for the patient; (b) lower life satisfaction and poorer self-reported health in health care professionals; and (c) changes in patient care practices. Nurses reported analyzing the event and apologizing, whereas physicians reported talking preferentially to colleagues, rather than to their supervisor, about changing practices. The RIS is a valid and reliable measure of care-related regret intensity for hospital-based physicians and nurses.

  15. Risø 1978: Further Investigations into the Effects of Local Terrain Irregularties on Tower-Measured Wind Profiles

    DEFF Research Database (Denmark)

    Peterson, E. W.; Taylor, P. A.; Højstrup, Jørgen

    1980-01-01

    Observations of flow over complex terrain taken at Risø during June–July 1978 and numerical studies confirm earlier findings that small variations in surface elevation have significant effects on mean wind profiles. Measured shear stresses in the nonequilibrium region of the flow are consistent w...... with theory but quite different from those obtained assuming simple flux-profile relationships. These findings imply that flux-profile relationships can be quite complicated over other than simple homogeneous terrain....

  16. Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark - Annual Progress Report 2009

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Michelsen, Poul; Juul Rasmussen, Jens

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its...... superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009....

  17. Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark - Annual Progress Report 2008

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Michelsen, Poul; Juul Rasmussen, Jens

    The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its...... been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008....

  18. L'innovation au service d'économies du savoir caractérisées par l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'innovation au service d'économies du savoir caractérisées par l'inclusion en Asie - phase II. Learning Initiatives for Network Economies in Asia (LIRNEasia) cherche à cerner les obstacles institutionnels à l'utilisation efficace des technologies de l'information et de la communication (TIC) pour améliorer les conditions de ...

  19. Integration of radiology and hospital information systems (RIS, HIS) with PACS

    International Nuclear Information System (INIS)

    Mosser, H.; Urban, M.; Hruby, W.; Duerr, M.; Rueger, W.

    1992-01-01

    PACS development has now reached a stage where it can clearly be stated that the technology for storage, networking and display in a fully digital environment is available. This is reflected by an already large and rapidly increasing number of PACS installations in USA, Western Europe and Japan. Such installations consist of a great variety of information systems, more or less interconnected, like PACS, HIS, RIS and other departmental systems, differing in both hardware and software. Various data -even if they only concern one person- are stored in different systems distributed in the hospital. The integration of all digital systems into a functional unit is determined by the radiologist's need of quick access to all relevant information regardless where it is stored. The interconnection and functional integration of all digital systems in the hospital determine the clinical benefits of PACS. This paper describes the radiologist's requirements concerning this integration, and presents some realistic solutions such as the Siemens ISI (Information System Interface), and a mobile viewing station for the wards (visitBox). (author). 9 refs., 4 figs

  20. Investigation of CT scan frequency in children based on RIS in a hospital

    International Nuclear Information System (INIS)

    Sun Yinping; Chen Junbo; Xiao Guobing; Sun Quanfu; Niu Haowei; Fu Yinghua

    2014-01-01

    Objective: To ascertain the frequency distribution of CT examinations in children. Method: A wide range of information was collected through the radiology information system (RIS), including ID, sex, birth date, examination time, the examined part of body and other relevant ones related to children who underwent CT examinations between Jan 1, 2012 and Dec 31, 2012. The SAS software was used for data processing and statistical analysis. Results: A total of 1 542 children underwent 1 670 examinations, of which 67% were male. Head CT examination was the most frequent,accounting for 71.9% of all CT examinations, and followed by the abdomen/pelvis examinations. The number of examinations of children undergoing the repetitive examination accounted for 6.4%; 51.7% of the examinations was for trauma. The positive rate of CT examination was 51%, dependent upon the age and examined body parts to some extent. The younger patients had lower positive rate, and the positive rate of head CT examination was lower than those in other parts. Conclusions: To reduce the possible cancer risk to be induced by the ionizing radiation from CT, justification of CT examination should be considered for children. (authors)

  1. Clinical results of HIS, RIS, PACS integration using data integration CASE tools

    Science.gov (United States)

    Taira, Ricky K.; Chan, Hing-Ming; Breant, Claudine M.; Huang, Lu J.; Valentino, Daniel J.

    1995-05-01

    Current infrastructure research in PACS is dominated by the development of communication networks (local area networks, teleradiology, ATM networks, etc.), multimedia display workstations, and hierarchical image storage architectures. However, limited work has been performed on developing flexible, expansible, and intelligent information processing architectures for the vast decentralized image and text data repositories prevalent in healthcare environments. Patient information is often distributed among multiple data management systems. Current large-scale efforts to integrate medical information and knowledge sources have been costly with limited retrieval functionality. Software integration strategies to unify distributed data and knowledge sources is still lacking commercially. Systems heterogeneity (i.e., differences in hardware platforms, communication protocols, database management software, nomenclature, etc.) is at the heart of the problem and is unlikely to be standardized in the near future. In this paper, we demonstrate the use of newly available CASE (computer- aided software engineering) tools to rapidly integrate HIS, RIS, and PACS information systems. The advantages of these tools include fast development time (low-level code is generated from graphical specifications), and easy system maintenance (excellent documentation, easy to perform changes, and centralized code repository in an object-oriented database). The CASE tools are used to develop and manage the `middle-ware' in our client- mediator-serve architecture for systems integration. Our architecture is scalable and can accommodate heterogeneous database and communication protocols.

  2. Designing the robot inclusive space challenge

    Directory of Open Access Journals (Sweden)

    Rajesh Elara Mohan

    2015-11-01

    Full Text Available A novel robotic challenge, namely the robot inclusive spaces (RIS challenge, is proposed in this paper, which is a cross disciplinary and design focused initiative. It aims to foster the roboticists, architects, and designers towards realizing robot friendly social spaces. Contrary to conventional robotics competitions focusing on designing robots and its component technologies, robot inclusive spaces challenge adopts an interdisciplinary “design for robots” strategy to overcome the traditional research problem in real world deployments of social robots. In order to realize the RIS, various architectural elements must be adapted including: design principles for inclusive spaces, lighting schemes, furniture choices and arrangement, wall and floor surfaces, pathways among others. This paper introduces the format and design principles of RIS challenge, presents a first run of the challenge, and gives the corresponding analysis.

  3. The KnowRISK project - Know your city, Reduce seISmic risK through non-structural elements

    Science.gov (United States)

    Sousa Oliveria, Carlos; Amaral Ferreira, Mónica; Lopez, Mário; Sousa Silva, Delta; Musacchio, Gemma; Rupakhety, Rajesh; Falsaperla, Susanna; Meroni, Fabrizio; Langer, Horst

    2016-04-01

    Historically, there is a tendency to focus on seismic structural performance of buildings, neglecting the potential for damage of non-structural elements. In particular, non-structural elements of buildings are their architectural parts (i.e. partitions, ceilings, cladding), electrical and mechanical components (i.e., distribution panels, piping, plumbing), and contents (e.g., furniture, bookcases, computers and desktop equipment). Damage of these elements often contributes significantly to earthquake impacts. In the 1999 Izmit Earthquake, Turkey, 50% of the injuries and 3% of human losses were caused by non-structural failures. In the 2010-2011 Christchurch Earthquakes (New Zealand), 40% of building damage was induced by non-structural malfunctions. Around 70%-85% of construction cost goes into these elements, and their damage can strongly influence the ability of communities to cope with and recover from earthquakes. The project Know your city, Reduce seISmic risK through non-structural elements (KnowRISK) aims at facilitating local communities' access to expert knowledge on non-structural seismic protection solutions. The project will study seismic scenarios critical for non-structural damage, produce a portfolio of non-structural protection measures and investigate the level of awareness in specific communities. We will implement risk communication strategies that will take into account the social and cultural background and a participatory approach to raise awareness in local communities. The paradox between the progress of scientific knowledge and the ongoing increase of losses from natural disasters worldwide is a well-identified gap in the UN Hyogo Framework for Action 2005-2015, in which one of the main priorities is the investment on "knowledge use, innovation and education to build a culture of safety and resilience". The KnowRISK is well aligned with these priorities and will contribute to participatory action aimed at: i) transferring expert knowledge

  4. Impact of a PACS/RIS-integrated speech recognition system on radiology reporting time and report availability

    International Nuclear Information System (INIS)

    Trumm, C.G.; Glaser, C.; Paasche, V.; Kuettner, B.; Francke, M.; Nissen-Meyer, S.; Reiser, M.; Crispin, A.; Popp, P.

    2006-01-01

    Purpose: Quantification of the impact of a PACS/RIS-integrated speech recognition system (SRS) on the time expenditure for radiology reporting and on hospital-wide report availability (RA) in a university institution. Material and Methods: In a prospective pilot study, the following parameters were assessed for 669 radiographic examinations (CR): 1. time requirement per report dictation (TED: dictation time (s)/number of images [examination] x number of words [report]) with either a combination of PACS/tape-based dictation (TD: analog dictation device/minicassette/transcription) or PACS/RIS/speech recognition system (RR: remote recognition/transcription and OR: online recognition/self-correction by radiologist), respectively, and 2. the Report Turnaround Time (RTT) as the time interval from the entry of the first image into the PACS to the available RIS/HIS report. Two equal time periods were chosen retrospectively from the RIS database: 11/2002-2/2003 (only TD) and 11/2003-2/2004 (only RR or OR with speech recognition system [SRS]). The midterm (≥24 h, 24 h intervals) and short-term (< 24 h, 1 h intervals), RA after examination completion were calculated for all modalities and for Cr, CT, MR and XA/DS separately. The relative increase in the mid-term RA (RIMRA: related to total number of examinations in each time period) and increase in the short-term RA (ISRA: ratio of available reports during the 1st to 24th hour) were calculated. Results: Prospectively, there was a significant difference between TD/RR/OR (n=151/257/261) regarding mean TED (0.44/0.54/0.62 s [per word and image]) and mean RTT (10.47/6.65/1.27 h), respectively. Retrospectively, 37 898/39 680 reports were computed from the RIS database for the time periods of 11/2002-2/2003 and 11/2003-2/2004. For CR/CT there was a shift of the short-term RA to the first 6 hours after examination completion (mean cumulative RA 20% higher) with a more than three-fold increase in the total number of available

  5. Development of O/W emulsions containing Euterpe oleracea extract and evaluation of photoprotective efficacy

    Directory of Open Access Journals (Sweden)

    Cláudia Cecilio Daher

    2014-09-01

    Full Text Available Euterpe oleraceaMart. is a palm tree popularly known as açai, which is primarily found in northern Brazil. The açai's fruits contain anthocyanins, a class of polyphenols to which antioxidant properties have been attributed. The aim of this work was to develop O/W sunscreens emulsions containing açai glycolic extract (AGE and to evaluate both their physical stability and photoprotective efficacy. Emulsions containing AGE and sunscreens were formulated using different types and concentrations of polymeric surfactant (acrylates/C 10-30 alkyl acrylate crosspolymer and sodium polyacrylate. The influence of two rheology modifiers (polyacrylamide (and C13-14/isoparaffin (and Laureth-7 and Carbomer on the stability was also investigated. Physical stability was evaluated by preliminary and accelerated studies. Emulsions with 1.0% sodium polyacrylate were stable and exhibited non-newtonian pseudoplastic behavior and thixotropy. Photoprotective efficacy was evaluated by in vivo Sun Protection Factor (SPF and determination of Protection Factor of UVA (PF-UVA. When AGE was added to the sunscreen emulsion, no significant increase in the in vivo SPF value was observed. The emulsion containing AGE showed PF-UVA = 14.97, 1.69 of the SPF/PF-UVA ratio and a critical wavelength value of 378 nm, and may therefore be considered a sunscreen with UVA and UVB protection.

  6. Rheology and microstructure of gluten and soya-based o/w emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Bengoechea, Carlos; Cordobes, Felipe; Guerrero, Antonio [Universidad de Sevilla, Departamento de Ingenieria Quimica, Sevilla (Spain)

    2006-10-15

    Highly concentrated oil-in-water (o/w) emulsion stabilised by means of gluten and soya protein isolate (SPI) at low pH have been characterized by means of linear dynamic viscoelasticity and droplet size distribution analysis (DSD). The microstructure of these emulsions has been characterized at a colloidal level by using confocal laser scanning microscopy (CLSM) and light microscopy (LM). These emulsions always exhibited a behaviour characteristic of highly flocculated emulsions with a mechanical spectrum showing a well-developed plateau region. DSD results generally showed log normal bimodal profiles. Microstructure images revealed occurrence of a close packing of droplets with a broad distribution of sizes participating in the formation of a three dimensional flocculated network. The Mason model of elasticity of compressed emulsions has been used to correlate viscoelastic and microstructural parameters giving adequate fitting but underestimating the elastic properties obtained for the highest concentration of gluten. These deviations may be explained in terms of an enhancement of the elastic network formed in the aqueous phase in which the glutenin fraction must play an important role. (orig.)

  7. Effects of subsoil compaction on hydraulic properties and preferential flow in a Swedish clay soil

    DEFF Research Database (Denmark)

    Mossadeghi-Björklund, M; Arvidsson, J.; Keller, Thomas

    2016-01-01

    in saturated hydraulic conductivity, air permeability and number of macropores at the second site. At this site, the traffic also significantly reduced the strength of preferential flow, presumably due to compaction-induced disruption of macropore continuity. In apparent contrast, some previous studies have shown......Soil compaction by vehicular traffic modifies the pore structure and soil hydraulic properties. These changes potentially influence the occurrence of preferential flow, which so far has been little studied. Our aim was to study the effect of compaction on soil hydraulic and transport properties...... transport derived from non-reactive tracer breakthrough curves and measurements of saturated hydraulic conductivity (Ks) and air permeability at the field moisture content (Ka). Although the traffic treatment did not cause any compaction effects at one of the two sites, it did result in significant reductions...

  8. Productive interactions for societal impact: Developing a research information system for agriculture (RIS-Agric) at Stellenbosch University, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Boshoff, N.; Esterhuyse, H.

    2016-07-01

    Assessments of the societal impact of research rely on primary data as input to the relevant indicators. In the current project, the data collection for indicator construction is guided by the SIAMPI approach to societal impact assessment. According to SIAMPI, the achievement of societal impact involves two elements: stakeholders and productive interactions. The latter includes three kinds of interactions: direct personal interactions; indirect interactions where contact is mediated by a material or human ‘carrier’; and financial interactions that refer to the economic exchanges between researchers and stakeholders. The question to be explored is whether the assessment of the societal impact of research can be facilitated by capturing any direct, indirect and financial interactions between researchers and societal stakeholders in a research information system. CREST/SciSTIP is developing such a system, called RIS-Agric, in cooperation with the Faculty of AgriSciences at Stellenbosch University and four agricultural research funders in South Africa that represent different agricultural commodities. A RIS with productive interactions at its core – and the funded research project as the unit of observation – will produce the necessary data for indicators linked to the societal impact of research, in addition to generating insights about the ‘pathway’ from research to societal impact. The indicators need to be ‘socially robust’ in the sense that their validation processes should include the research beneficiaries and their representatives. In doing so, RIS-Agric will produce a useful, standardised measurement mechanism that is aligned across the different commodities. The focus on productive interactions will be supplemented by other methods in order to enable the quantification of societal impact in the form of ‘impact scores’. (Author)

  9. Application of a statistical software package for analysis of large patient dose data sets obtained from RIS

    International Nuclear Information System (INIS)

    Fazakerley, J.; Charnock, P.; Wilde, R.; Jones, R.; Ward, M.

    2010-01-01

    For the purpose of patient dose audit, clinical audit and radiology workload analysis, data from Radiology Information Systems (RIS) at many hospitals are collected using a database and the analysis was automated using a statistical package and Visual Basic coding. The database is a Structured Query Language database, which can be queried using an off-the-shelf statistical package, Statistica. Macros were created to automatically format the data to a consistent format between different hospitals ready for analysis. These macros can also be used to automate further analysis such as detailing mean kV, mAs and entrance surface dose per room and per gender. Standard deviation and standard error of the mean are also generated. Graphs can also be generated to illustrate the trends in doses between different variables such as room and gender. Collectively, this information can be used to generate a report. A process that once could take up to 1 d to complete now takes around 1 h. A major benefit in providing the service to hospital trusts is that less resource is now required to report on RIS data, making the possibility of continuous dose audit more likely. Time that was spent on sorting through data can now be spent on improving the analysis to provide benefit to the customer. Using data sets from RIS is a good way to perform dose audits as the huge numbers of data available provide the bases for very accurate analysis. Using macros written in Statistica Visual Basic has helped sort and consistently analyse these data. Being able to analyse by exposure factors has provided a more detailed report to the customer. (authors)

  10. Abstract Book of the NKS Workshop on Radioanalytical Chemistry, Risø, Roskilde, Denmark, 2-6th Sept. 2013

    DEFF Research Database (Denmark)

    from Germany, France, Slovenia, Korea, Turkey, and China. The workshop consists two part, 3 days lab practices and 2 days lectures/presentation. 3 lab practices were organized, i.e. (1) Radiochemical separation of Pu and ICP-MS measurement of Pu isotopes; (2) Radiochemical separation of 210Po and 226Ra......This report compiled all abstracts presented in the NKS Workshop on Radioanalytical Chemistry at Risø, Roskilde, Denmark in 2-6th Sept. 2013. Total 35 participants registered to the workshop, among them 18 from Sweden, 5 from Denmark, 3 from Finland, and 3 from Norway, there are also 6 participants...

  11. Development and Evaluation of Photoprotective O/W Emulsions Containing Hydroalcoholic Extract of Neoglaziovia variegata (Bromeliaceae

    Directory of Open Access Journals (Sweden)

    Raimundo Gonçalves de Oliveira-Júnior

    2017-01-01

    Full Text Available Neoglaziovia variegata is a Bromeliaceae plant species widely found in Brazil with several pharmacological properties, including photoprotective activity. Although herbal-based active ingredients have been applied in cosmetic products, especially for skin treatment, its application in sunscreen formulations remains unexplored. The aim of this work is to evaluate the photoprotective effect of cosmetic formulations containing hydroalcoholic extract of N. variegata (Nv-HA. Initially, the phenolic and flavonoid total content of Nv-HA were determined. The photoprotective activity of Nv-HA was subsequently assessed using a spectrophotometric method. Nv-HA was incorporated in O/W emulsions in the presence or absence of synthetic filters and their photoprotective efficacy was evaluated by spectrophotometric SPF determination. Finally, the stability study of the formulations was performed through the freezing/defrosting method. Nv-HA showed significant phenolic and flavonoids content (61.66±5.14 mg GAE/g and 90.27±5.03 mg CE/g, resp.. Nv-HA showed SPF values of 5.43±0.07 and 11.73±0.04 for the concentrations of 0.5 and 1.0% (v/v, respectively. It was verified that Nv-HA potentiated the photoprotective effect of formulations containing only synthetic filters. Furthermore, the formulations have remained stable at the end of the preliminary stability study. According to the results, it was concluded that Nv-HA can be used as a chemical filter in cosmetic formulations.

  12. Development and Evaluation of Photoprotective O/W Emulsions Containing Hydroalcoholic Extract of Neoglaziovia variegata (Bromeliaceae).

    Science.gov (United States)

    de Oliveira-Júnior, Raimundo Gonçalves; Souza, Grasielly Rocha; Ferraz, Christiane Adrielly Alves; de Oliveira, Ana Paula; Araújo, Camila de Souza; de Lima-Saraiva, Sarah Raquel Gomes; Reis, Silvio Alan Gonçalves Bomfim; Gonçalves, Talita Mota; Rolim, Larissa Araújo; Rolim-Neto, Pedro José; César, Francine Celise Siqueira; Almeida, Jackson Roberto Guedes da Silva

    2017-01-01

    Neoglaziovia variegata is a Bromeliaceae plant species widely found in Brazil with several pharmacological properties, including photoprotective activity. Although herbal-based active ingredients have been applied in cosmetic products, especially for skin treatment, its application in sunscreen formulations remains unexplored. The aim of this work is to evaluate the photoprotective effect of cosmetic formulations containing hydroalcoholic extract of N. variegata (Nv-HA). Initially, the phenolic and flavonoid total content of Nv-HA were determined. The photoprotective activity of Nv-HA was subsequently assessed using a spectrophotometric method. Nv-HA was incorporated in O/W emulsions in the presence or absence of synthetic filters and their photoprotective efficacy was evaluated by spectrophotometric SPF determination. Finally, the stability study of the formulations was performed through the freezing/defrosting method. Nv-HA showed significant phenolic and flavonoids content (61.66 ± 5.14 mg GAE/g and 90.27 ± 5.03 mg CE/g, resp.). Nv-HA showed SPF values of 5.43 ± 0.07 and 11.73 ± 0.04 for the concentrations of 0.5 and 1.0% (v/v), respectively. It was verified that Nv-HA potentiated the photoprotective effect of formulations containing only synthetic filters. Furthermore, the formulations have remained stable at the end of the preliminary stability study. According to the results, it was concluded that Nv-HA can be used as a chemical filter in cosmetic formulations.

  13. Incorporation of water-in-oil-in-water (W1/O/W2) double emulsion in a set-type yogurt model.

    Science.gov (United States)

    Lalou, Sofia; Kadri, Hani El; Gkatzionis, Konstantinos

    2017-10-01

    The effect of W 1 /O/W 2 emulsion incorporation in set-type yogurt on the acidification process, physicochemical properties, bacterial growth kinetics and structural characteristics was investigated. The W 1 /O/W 2 emulsion was formed by using a two-step homogenisation process and milk as the W 1 and W 2 phases, and stability was monitored with optical microscopy and cryo-SEM. Adding the W 1 /O/W 2 emulsions reduced the acidification rate, viscosity and water retention capacity. Texture (adhesiveness, cohesiveness, hardness, and gumminess) differed in yogurts containing W 1 /O/W 2 emulsion compared to controls during the acidification process, however, trends became stable during storage. The growth of S. thermophilus during the acidification process of yogurt was reduced in the presence of W 1 /O/W 2 emulsion while L. bulgaricus trended higher during storage. This study shows that yogurts containing W 1 /O/W 2 emulsion are feasible subject to processing modification. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Preparation, characterization and relative bioavailability of oral elemene o/w microemulsion

    Science.gov (United States)

    Zeng, Zhaowu; Zhou, Guanglin; Wang, Xiaoli; Huang, Eric Zhijian; Zhan, Xiaori; Liu, Jun; Wang, Shuling; Wang, Anming; Li, Haifeng; Pei, Xiaolin; Xie, Tian

    2010-01-01

    The objective was to develop an elemene oil/water (o/w) microemulsion and evaluate its characteristics and oral relative bioavailability in rats. Elemene was used as the oil phase and drug, polysorbate 80 as a surfactant along with ethanol, propylene glycol, and glycerol as the cosurfactants. The microemulsion was prepared by mixing method, or ultrasonication method in an ultrasonic bath. Its three-dimensional response surface diagram was drawn by Mathcad software. The microemulsion was characterized by visual observation, cross-polarized microscopy, size, zeta potential, acidity, viscosity, and surface tension measurement. The drug content and entrapment efficiency were determined by ultra fast liquid chromatography (UFLC) and liquid surface method. Blood was drawn from rats at different time points after oral administration of an elemene microemulsion or a commercial elemene emulsion for measurement of the drug in plasma by UFLC to establish the pharmacokinetic parameters and relative bioavailability. The elemene microemulsion as a clarified and isotropic system containing 1% elemene (w/v), 5% ethanol (v/v), 15% propylene glycol (v/v), 15% glycerol (v/v), and 5% polysorbate 80 (w/v), was characterized as (57.7 ± 2.8) nm in size, 0.485 ± 0.032 in polydispersity index, (3.2 ± 0.4) mv in zeta potential, (5.19 ± 0.08) in pH, 6 mpa·s in viscosity, (31.8 ± 0.3) mN·m−1 in surface tension, (8.273 ± 0.018) mg·mL−1 in content of β-elemene, and (99.81 ± 0.24)% in average entrapment efficiency. The area under the concentration-time curves from 0 h to 24 h (AUC0→24h) of the elemene microemulsion and commercial elemene emulsion were integrated to be 3.092 mg·h·L−1 and 1.896 mg·h·L−1 respectively, yielding a relative bioavailability of 163.1%. The present study demonstrates the elemene microemulsion as a new formulation with ease of preparation, high entrapment efficiency, excellent clarity, good stability, and improved bioavailability. PMID:20856831

  15. Preparation, characterization and relative bioavailability of oral elemene o/w microemulsion

    Directory of Open Access Journals (Sweden)

    Zhaowu Zeng

    2010-08-01

    Full Text Available Zhaowu Zeng1, Guanglin Zhou1, Xiaoli Wang2, Eric Zhijian Huang1, Xiaori Zhan1, Jun Liu1, Shuling Wang1, Anming Wang1, Haifeng Li1, Xiaolin Pei1, Tian Xie11Research Center for Biomedicine and Health, Hangzhou Normal University, Hangzhou, Zhejiang, China; 2Yichun University of Jiangxi Province, Yichun, Jiangxi, ChinaAbstract: The objective was to develop an elemene oil/water (o/w microemulsion and evaluate its characteristics and oral relative bioavailability in rats. Elemene was used as the oil phase and drug, polysorbate 80 as a surfactant along with ethanol, propylene glycol, and glycerol as the cosurfactants. The microemulsion was prepared by mixing method, or ultrasonication method in an ultrasonic bath. Its three-dimensional response surface diagram was drawn by Mathcad software. The microemulsion was characterized by visual observation, cross-polarized microscopy, size, zeta potential, acidity, viscosity, and surface tension measurement. The drug content and entrapment efficiency were determined by ultra fast liquid chromatography (UFLC and liquid surface method. Blood was drawn from rats at different time points after oral administration of an elemene microemulsion or a commercial elemene emulsion for measurement of the drug in plasma by UFLC to establish the pharmacokinetic parameters and relative bioavailability. The elemene microemulsion as a clarified and isotropic system containing 1% elemene (w/v, 5% ethanol (v/v, 15% propylene glycol (v/v, 15% glycerol (v/v, and 5% polysorbate 80 (w/v, was characterized as (57.7 ± 2.8 nm in size, 0.485 ± 0.032 in polydispersity index, (3.2 ± 0.4 mv in zeta potential, (5.19 ± 0.08 in pH, 6 mpa•s in viscosity, (31.8 ± 0.3 mN•m-1 in surface tension, (8.273 ± 0.018 mg•mL-1 in content of ß-elemene, and (99.81 ± 0.24% in average entrapment efficiency. The area under the concentration-time curves from 0 h to 24 h (AUC0→24h of the elemene microemulsion and commercial elemene emulsion were

  16. Preparation, characterization and relative bioavailability of oral elemene o/w microemulsion.

    Science.gov (United States)

    Zeng, Zhaowu; Zhou, Guanglin; Wang, Xiaoli; Huang, Eric Zhijian; Zhan, Xiaori; Liu, Jun; Wang, Shuling; Wang, Anming; Li, Haifeng; Pei, Xiaolin; Xie, Tian

    2010-09-07

    The objective was to develop an elemene oil/water (o/w) microemulsion and evaluate its characteristics and oral relative bioavailability in rats. Elemene was used as the oil phase and drug, polysorbate 80 as a surfactant along with ethanol, propylene glycol, and glycerol as the cosurfactants. The microemulsion was prepared by mixing method, or ultrasonication method in an ultrasonic bath. Its three-dimensional response surface diagram was drawn by Mathcad software. The microemulsion was characterized by visual observation, cross-polarized microscopy, size, zeta potential, acidity, viscosity, and surface tension measurement. The drug content and entrapment efficiency were determined by ultra fast liquid chromatography (UFLC) and liquid surface method. Blood was drawn from rats at different time points after oral administration of an elemene microemulsion or a commercial elemene emulsion for measurement of the drug in plasma by UFLC to establish the pharmacokinetic parameters and relative bioavailability. The elemene microemulsion as a clarified and isotropic system containing 1% elemene (w/v), 5% ethanol (v/v), 15% propylene glycol (v/v), 15% glycerol (v/v), and 5% polysorbate 80 (w/v), was characterized as (57.7 ± 2.8) nm in size, 0.485 ± 0.032 in polydispersity index, (3.2 ± 0.4) mv in zeta potential, (5.19 ± 0.08) in pH, 6 mpa·s in viscosity, (31.8 ± 0.3) mN·m(-1) in surface tension, (8.273 ± 0.018) mg·mL(-1) in content of β-elemene, and (99.81 ± 0.24)% in average entrapment efficiency. The area under the concentration-time curves from 0 h to 24 h (AUC(0→24h)) of the elemene microemulsion and commercial elemene emulsion were integrated to be 3.092 mg·h·L(-1) and 1.896 mg·h·L(-1) respectively, yielding a relative bioavailability of 163.1%. The present study demonstrates the elemene microemulsion as a new formulation with ease of preparation, high entrapment efficiency, excellent clarity, good stability, and improved bioavailability.

  17. Risøs treårsplan 2000-2002. Rullende 3-årsplan med hovedlinier for året 2000 og perspektiver for årene 2001 og 2002

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    2000-01-01

    Denne treårsplan fastlægger rammerne for Forskningscenter Risøs virksomhed i perioden 2000 - 2002. Risø hører under Forskningsministeriet og driver naturvidenskabelig og teknisk-videnskabelig forskning med det formål at skabe nye udviklingsmuligheder forerhvervsliv og samfund rettet mod anvendels...

  18. Risøs treårsplan 1999-2001. Rullende 3-årsplan med hovedlinier for året 1999 og perspektiver for årene 2000 og 2001

    DEFF Research Database (Denmark)

    Forskningscenter Risø, Roskilde

    1999-01-01

    Denne treårsplan fastlægger rammerne for Forskningscenter Risøs virksomhed i perioden 1999-2001. Risø hører under Forskningsministeriet og driver naturvidenskabelig og teknisk-videnskabelig forskning med det formål at skabe nye udviklingsmuligheder forerhvervsliv og samfund rettet mod anvendelse ...

  19. Do oil-in-water (O/W) nano-emulsions have an effect on survival and growth of bacteria?

    Science.gov (United States)

    Kadri, Hani El; Devanthi, Putu Virgina Partha; Overton, Tim W; Gkatzionis, Konstantinos

    2017-11-01

    Nano-emulsions (typically droplet diameternano-emulsions even in reference to similar microbial species and formulations. Following up, this study aimed to investigate the effect of nano-emulsions on four bacterial species (Staphylococcus epidermidis, Bacillus cereus, Lactobacillus acidophilus and five Escherichia coli strains) possessing different surface charge and hydrophobicity. Model oil-in-water (O/W) emulsions with different size of oil droplets were prepared with sunflower oil stabilised by polysorbate 80 (Tween80) emulsifier (hydrophilic), using high shear mixing followed by ultrasonication. The viability of bacteria was monitored by culture, membrane integrity was assessed with flow cytometric analysis with propidium iodide (PI) staining and fluorescence microscopy monitored the spatial distribution of cells within the O/W emulsions. The stability of the nano-O/W emulsions in the presence of bacteria was assessed by monitoring the droplet size [D (4, 3)] and creaming height. In contrast to other reports the survival and growth of bacteria was not affected by the size of the oil droplets, no damage to the bacterial membrane was evident with flow cytometry and emulsion stability was not affected by the presence of bacteria during 7days of storage. Furthermore, the antimicrobial activity of caprylic acid (CA) was compared between O/W coarse and nano-emulsions while varying the concentration of the hydrophilic surfactant Tween80. The activity of CA was similar in nano-emulsion and coarse emulsion; however, it was higher than in bulk oil and was reduced with increasing Tween80 concentration, suggesting that its efficacy is dictated by formulation rather than oil droplet size. The results demonstrated no enhanced antimicrobial activity due to nano-sized oil droplets and that conclusions on nano-emulsions should be taken with caution. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. CelOWS: an ontology based framework for the provision of semantic web services related to biological models.

    Science.gov (United States)

    Matos, Ely Edison; Campos, Fernanda; Braga, Regina; Palazzi, Daniele

    2010-02-01

    The amount of information generated by biological research has lead to an intensive use of models. Mathematical and computational modeling needs accurate description to share, reuse and simulate models as formulated by original authors. In this paper, we introduce the Cell Component Ontology (CelO), expressed in OWL-DL. This ontology captures both the structure of a cell model and the properties of functional components. We use this ontology in a Web project (CelOWS) to describe, query and compose CellML models, using semantic web services. It aims to improve reuse and composition of existent components and allow semantic validation of new models.

  1. FORMULASI MIKROEMULSI MINYAK DALAM AIR (O/W YANG STABIL MENGGUNAKAN KOMBINASI TIGA SURFAKTAN NON IONIK DENGAN NILAI HLB RENDAH, TINGGI DAN SEDANG Stable O/W Microemulsion Formulation Using Combination of Three Nonionic Surfactants with Low, High and Med

    Directory of Open Access Journals (Sweden)

    Sih Yuwanti

    2012-05-01

    Full Text Available The aim of this research was to determine the proportion of oil, surfactant and water which could produce a stable O/W microemulsion using combination of three nonionic surfactants with low, high and medium HLB values; and to determine the role of surfactant with a medium HLB value in O/W microemulsion formulation. The first group of microemulsions were prepared using combination of Tween 80, Span 80 and Span 40 (80 %:10 %:10 % with dif- ferent proportions of VCO:surfactant (1:3, 1:3.5 dan 1:4.  The second goups of microemulsion were prepared using combination of Tween 80, Span 80 and Span 40 (90 %:5 %:5 % with different proportions of VCO:surfactant 1:4,1:4.5 dan 1:5.  The stability of microemulsion was determined during storage at room temperature and after being ovened at 105 0C 5 hours and centrifuged at 2300 g 15 minutes. Microemulsion stability was determined by measur- ing absorbance of the microemulsion at 502 nm and then converted to turbidity (%.  In order to determine the role of surfactant with a medium HLB value in the formulation of O/W microemulsion, one set microemulsions were made without surfactant with a medium HLB value, and another set of microemulsions were prepared with different ratios of low and medium HLB surfactant (1:1, 2:1 and 1:2. The most stable microemulsion was achieved when the proportion of VCO:surfactant:water was 4:20:76 and combination of Tween 80:Span 80:Span 40 with the ratio of 90:3.33:6.67. A more stable O/W microemulsion could be obtained when surfactant with a medium HLB value was added to O/W microemulsion formulation. Surfactant with a medium HLB value would link the oil phase and water phase with sur- factant layer, interaction of surfactant-oil and surfactant-water increased. It provided a smooth transition between oil phase and water phase, and the microemulsion became more stable. ABSTRAK Tujuan dari penelitian ini adalah untuk menentukan proporsi minyak, surfaktan dan air yang dapat

  2. Cyclic di-GMP regulation of the bvg-repressed genes and the orphan response regulator RisA in Bordetella pertussis

    Science.gov (United States)

    Expression of Bordetella pertussis virulence factors is activated by the BvgAS two-component system. Under modulating growth conditions BvgAS indirectly represses another set of genes through the action of BvgR, a bvg-activated protein. BvgR blocks activation of the response regulator RisA which is ...

  3. In vivo postprandial bioavailability of interesterified-lipids in sodium-caseinate or chitosan based O/W emulsions.

    Science.gov (United States)

    Farfán, M; Villalón, M J; Ortíz, M E; Nieto, S; Bouchon, P

    2015-03-15

    Recent studies have shown that it should be possible to control lipid bioavailability through food structural approaches. Nevertheless, the gastrointestinal-tract physiological conditions must also be considered. To get a better understanding of this phenomenon, we evaluated the effect of emulsification, as well as the use of sodium caseinate or chitosan, on the postprandial bioavailability of interesterified-lipids in O/W emulsions after oral gastric feeding Sprague-Dawley rats. We verified that emulsification may increase lipid absorption, as determined after feeding sodium-caseinate emulsions. However, this result could not be generalised. Interesterified-lipids that were emulsified with chitosan were equally absorbed as those contained in non-emulsified interesterified-lipids/distilled-water blends. Copyright © 2014. Published by Elsevier Ltd.

  4. Comparing image search behaviour in the ARRS GoldMiner search engine and a clinical PACS/RIS.

    Science.gov (United States)

    De-Arteaga, Maria; Eggel, Ivan; Do, Bao; Rubin, Daniel; Kahn, Charles E; Müller, Henning

    2015-08-01

    Information search has changed the way we manage knowledge and the ubiquity of information access has made search a frequent activity, whether via Internet search engines or increasingly via mobile devices. Medical information search is in this respect no different and much research has been devoted to analyzing the way in which physicians aim to access information. Medical image search is a much smaller domain but has gained much attention as it has different characteristics than search for text documents. While web search log files have been analysed many times to better understand user behaviour, the log files of hospital internal systems for search in a PACS/RIS (Picture Archival and Communication System, Radiology Information System) have rarely been analysed. Such a comparison between a hospital PACS/RIS search and a web system for searching images of the biomedical literature is the goal of this paper. Objectives are to identify similarities and differences in search behaviour of the two systems, which could then be used to optimize existing systems and build new search engines. Log files of the ARRS GoldMiner medical image search engine (freely accessible on the Internet) containing 222,005 queries, and log files of Stanford's internal PACS/RIS search called radTF containing 18,068 queries were analysed. Each query was preprocessed and all query terms were mapped to the RadLex (Radiology Lexicon) terminology, a comprehensive lexicon of radiology terms created and maintained by the Radiological Society of North America, so the semantic content in the queries and the links between terms could be analysed, and synonyms for the same concept could be detected. RadLex was mainly created for the use in radiology reports, to aid structured reporting and the preparation of educational material (Lanlotz, 2006) [1]. In standard medical vocabularies such as MeSH (Medical Subject Headings) and UMLS (Unified Medical Language System) specific terms of radiology are often

  5. EPA Office of Water (OW): 305(b) Assessed Waters NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The 305(b) program system provide assessed water data and assessed water features for river segments, lakes, and estuaries designated under Section 305(b) of the...

  6. EPA Office of Water (OW): 305(b) Waters as Assessed NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The 305(b) program system provide assessed water data and assessed water features for river segments, lakes, and estuaries designated under Section 305(b) of the...

  7. EPA Office of Water (OW): Impaired Waters with TMDLs NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Total Maximum Daily Load (TMDL) Tracking System contains information on waters that are Not Supporting their designated uses. These waters are listed by the...

  8. EPA Office of Water (OW): 303(d) Listed Impaired Waters NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The 303(d) Listed Impaired Waters program system provides impaired water data and impaired water features reflecting river segments, lakes, and estuaries designated...

  9. EPA Office of Water (OW): TMDLs on Impaired Waters NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Total Maximum Daily Load (TMDL) Tracking System contains information on waters that are Not Supporting their designated uses. These waters are listed by the...

  10. Religião e sociedade no Egito antigo: do mito de Ísis e Osíris na obra de Plutarco (I d.C.)

    OpenAIRE

    Santos, Poliane Vasconi dos [UNESP

    2003-01-01

    Osíris foi um dos deuses mais importantes dentro do panteão da civilização egípcia. Encontramos alusões ao seu mito desde o começo da era dinástica até o período greco-romano, onde temos a síntese realizada por Plutarco (45-120 d.C.) no seu tratado sobre Ísis e Osíris. Através da análise desse mito, tal como narrado por Plutarco, pode-se perceber que sua influência foi muito profunda e marcante na história do Egito abrangendo questões referentes aos aspectos principais dessa sociedade. Seu mi...

  11. Rosa em policromia: cores, eros e íris (um arco de sexualidade entre Magma e Grande sertão: veredas

    Directory of Open Access Journals (Sweden)

    Wilberth Clayton Ferreira Salgueiro

    2005-10-01

    Full Text Available Numa  passagem de Grande sertão: veredas,  Riobaldo fala de uma "sonhice" que teve: "Diadorim  passando por debaixo do a rco-íris". Vinte anos antes,  em Magma,  Rosa esc reveu  um con junto de sete poemas, cujos  títu los  denunciam  a presen ça do arco-íris  e ativam sentidos que tal fenômeno carrega. Entender alguns destes sentidos, mostrando como as cores funcionam  na vida e na lite ratura, é o que quer o prese nte artigo. Para isso, analisam-se o poema "Ve rmelho" e a referida passagem-sonho como indicadores de um pensamento sobre a sexualidade.

  12. Embedding visual routines in AnaFocus' Eye-RIS Vision Systems for closing the perception to action loop in roving robots

    Science.gov (United States)

    Jiménez-Marrufo, A.; Caballero-García, D. J.

    2011-05-01

    The purpose of the current paper is to describe how different visual routines can be developed and embedded in the AnaFocus' Eye-RIS Vision System on Chip (VSoC) to close the perception to action loop within the roving robots developed under the framework of SPARK II European project. The Eye-RIS Vision System on Chip employs a bio-inspired architecture where image acquisition and processing are truly intermingled and the processing itself is carried out in two steps. At the first step, processing is fully parallel owing to the concourse of dedicated circuit structures which are integrated close to the sensors. At the second step, processing is realized on digitally-coded information data by means of digital processors. All these capabilities make the Eye-RIS VSoC very suitable for the integration within small robots in general, and within the robots developed by the SPARK II project in particular. These systems provide with image-processing capabilities and speed comparable to high-end conventional vision systems without the need for high-density image memory and intensive digital processing. As far as perception is concerned, current perceptual schemes are often based on information derived from visual routines. Since real world images are quite complex to be processed for perceptual needs with traditional approaches, more computationally feasible algorithms are required to extract the desired features from the scene in real time, to efficiently proceed with the consequent action. In this paper the development of such algorithms and their implementation taking full advantage of the sensing-processing capabilities of the Eye-RIS VSoC are described.

  13. Status of Development and Manufacture of Solid Oxide Fuel Cell at Topsoe Fuel Cell A/S and Risø/DTU

    DEFF Research Database (Denmark)

    Christiansen, Niels; Holm-Larsen, Helge; Jørgensen, Mette Juel

    2009-01-01

    Laboratory (Risø/DTU) which includes material synthesis and cost effective ceramic manufacturing methods for anode and metal supported flat planar cells in addition to multilayer assembling for compact stacks with metallic interconnects. The development is focussing on high electrochemical performance...... in SOFC technology includes system development in collaboration with system partners and development and manufacturing of integrated stack assemblies called PowerCore. ©2009 COPYRIGHT ECS - The Electrochemical Society...

  14. Composable Dynamic Voltage and Frequency Scaling and Power Management for Dataflow Applications

    NARCIS (Netherlands)

    Goossens, Kees; She, Dongrui; Milutinovic, A.; Molnos, Anca; Lopez, S.

    2010-01-01

    Composability means that the behaviour of an application, including its timing, is not affected by the absence or presence of other applications. It is required to be able to design, test, and verify applications independently. In this paper we de﬿ne composable dynamic voltage and frequency scaling

  15. Added flexibility in triple axis spectrometers: The two RITAs at Risø

    DEFF Research Database (Denmark)

    Lefmann, K.; McMorrow, D.F.; Rønnow, H.M.

    2000-01-01

    The cold-neutron triple-axis spectrometer RITA-I at Rise has been operational for about three years, and in the near future an improved version, RITA-2 will replace the existing triple-axis instrument TAS7. We review the performance of RITA-1 and the operation modes of its flexible secondary...... spectrometer, giving examples of a few key experiments, and describe the software developed for running it. Further, the design of the new RITA-2 instrument is presented. The two RITA spectrometers are compared with their sister instrument SPINS at NIST and with similar instruments planned elsewhere. (C) 2000...

  16. Testing of environmental radiation monitors using the Risø low-level radiation measurement stations

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.

    2000-01-01

    June, 1999. The chief aims of such experiments are to allow the participants to check their home calibrations of their detectors and to compare the responses of the individual environmental radiation measurement systems used in the different EU member states and making a link between the different...... a simulation of a radioactive plume passing over the monitors during a certain time was made using a specially designed source set up in the field that was able to vary the air kerma rate from low activity Cs-137 sources additional to the natural air kerma rate. It is demonstrated that a typical environmental...

  17. Thermodynamic compatibility and interactions between Speckled Sugar bean protein and xanthan gum for production of multilayer O/W emulsion.

    Science.gov (United States)

    Rahmati, Nazanin Fatemeh; Koocheki, Arash; Varidi, Mehdi; Kadkhodaee, Rassoul

    2018-03-01

    Thermodynamic compatibility and probable interactions between Speckled Sugar been protein (SSBP) and xanthan gum for production of multilayer O/W emulsion (30% oil) were investigated. Different interactions were observed between SSBP and xanthan at different pH (3-7) including electrostatic interactions and hydrogen bonding. These interactions were predominant at pH 3. When low xanthan gum concentration (0.1%) was used, phase separation and complex coacervation observed at this pH (negative effect of interactions). However, at pH 5, only 0.1% xanthan was enough to drastically reduce non-dissolved protein and its precipitation which normally occurs at this pH. In addition, incompatibility or segregative phase behavior which normally occurs when protein and polysaccharide have same charges was not observed (positive effects of interactions). Protein-gum interactions influenced emulsion properties (zeta potential, particle size, PDI, rheology, emulsion capacity, heat stability and creaming rate). Interactions had considerable influence on emulsion shelf life and produced completely stable emulsions at all pH values. Results confirmed that SSBP-xanthan gum mixture has a high potential for production of multilayer emulsions.

  18. Utilisation of water-in-oil-water (W1/O/W2) double emulsion in a set-type yogurt model for the delivery of probiotic Lactobacillus paracasei.

    Science.gov (United States)

    El Kadri, Hani; Lalou, Sofia; Mantzouridou, FaniTh; Gkatzionis, Konstantinos

    2018-05-01

    W 1 /O/W 2 emulsion in set-type yogurt has the potential to segregate probiotics in order to avoid interference with the starter culture as well as protection against harsh processing and digestion conditions. Lactobacillus paracasei subsp. paracasei DC 412 probiotic cells in milk-based W 1 /O/W 2 emulsions were incorporated in yogurt, in addition to starter cultures Lactobacillus bulgaricus and Streptococcus thermophilus, and the effect on the fermentation, bacterial growth kinetics, physicochemical properties, and structural characteristics was investigated. Stability of W 1 /O/W 2 was monitored with optical microscopy and cryo-SEM and localisation of encapsulated L. paracasei in yogurt was monitored using fluorescent microscopy. During fermentation, starter culture was not affected by introduction of L. paracasei and/or W 1 /O/W 2 emulsion. The viability of L. paracasei encapsulated in W 1 /O/W 2 emulsion was enhanced during storage and after exposure to simulated gastrointestinal conditions. L. paracasei remained within the inner W 1 phase till the end of the storage period (28 days at 4 °C). Moreover, W 1 /O/W 2 emulsion altered physicochemical and textural properties; however, these were within acceptable range. These results demonstrate the capability of W 1 /O/W 2 emulsion to be utilised for probiotic fortification of yogurt to increase functionality without interfering with starter culture and fermentation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Aerodynamic design of horizontal axis wind turbine with innovative local linearization of chord and twist distributions

    DEFF Research Database (Denmark)

    Tahani, Mojtaba; Kavari, Ghazale; Masdari, Mehran

    2017-01-01

    This study is aimed to aerodynamically design a 1 mega-Watt horizontal axis wind turbine in order to obtain the maximum power coefficient by linearizing the chord and twist distributions. A new linearization method has been used for chord and twist distributions by crossing tangent line through...... the geometry of the blades determines the power generated by rotor, designing the blade is a very important issue. Herein, calculations are done for different types of airfoil families namely Risø-A1-21, Risø-A1-18, S809, S814 and Du 93-W-210. Hence, the effect of selecting different airfoil families is also...

  20. Phase behavior and formation of o/w nano-emulsion in vegetable oil/ mixture of polyglycerol polyricinoleate and polyglycerin fatty acid ester/water systems.

    Science.gov (United States)

    Wakisaka, Satoshi; Nakanishi, Masami; Gohtani, Shoichi

    2014-01-01

    It is reported that mixing polyglycerol polyricinoleate (PGPR) and polyglycerol laurilester has a great emulsifying capacity, and consequently fine oil-in-water (o/w) emulsions can be formed. However, the role of PGPR is not clear. The objective of this research is to investigate the phase behavior of vegetable oil/mixture of PGPR and polyglycerol fatty acid ester/water systems, and to clarify the role of PGPR in making a fine emulsion. Phase diagrams were constructed to elucidate the optimal process for preparing fine emulsions. In all the systems examined in this study, the phases, including the liquid crystal phase (L(c)) and sponge phase (L(3)), spread widely in the phase diagrams. We examined droplet size of the emulsions prepared from each phase and found that o/w nano-emulsions with droplet sizes as small as 50 nm were formed by emulsifying either from a single L(3) phase or a two-phase region, L(c) + L(3). These results indicate that a sponge phase L(3) or liquid crystal phase L(c) or both is necessary to form an o/w nano-emulsion whose average droplet diameter is less than 50 nm for PGPR and polyglycerin fatty acid ester mixtures used as surfactant.

  1. Shear flow behaviour and emulsion-stabilizing effect of natural polysaccharide-protein gum in aqueous system and oil/water (O/W) emulsion.

    Science.gov (United States)

    Amid, Bahareh Tabatabaee; Mirhosseini, Hamed

    2013-03-01

    The main objective of the current work was to characterize the shear rheological flow behaviour and emulsifying properties of the natural biopolymer from durian seed. The present study revealed that the extraction condition significantly affected the physical and functional characteristics of the natural biopolymer from durian seed. The dynamic oscillatory test indicated that the biopolymer from durian seed showed more gel (or solid) like behaviour than the viscous (or liquid) like behaviour (G'>G″) at a relatively high concentration (20%) in the fixed frequency (0.1 Hz). This might be explained by the fact that the gum coils disentangle at low frequencies during the long period of oscillation, thus resulting in more gel like behaviour than the viscous like behaviour. The average droplet size of oil in water (O/W) emulsions stabilized by durian seed gum significantly varied from 0.42 to 7.48 μm. The results indicated that O/W emulsions showed significant different stability after 4 months storage. This might be interpreted by the considerable effect of the extraction condition on the chemical and molecular structure of the biopolymer, thus affecting its emulsifying capacity. The biopolymer extracted by using low water to seed (W/S) ratio at the low temperature under the alkaline condition showed a relatively high emulsifying activity in O/W emulsion. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Oil encapsulation in core-shell alginate capsules by inverse gelation II: comparison between dripping techniques using W/O or O/W emulsions.

    Science.gov (United States)

    Martins, Evandro; Poncelet, Denis; Rodrigues, Ramila Cristiane; Renard, Denis

    2017-09-01

    In the first part of this article, it was described an innovative method of oil encapsulation from dripping-inverse gelation using water-in-oil (W/O) emulsions. It was noticed that the method of oil encapsulation was quite different depending on the emulsion type (W/O or oil-in-water (O/W)) used and that the emulsion structure (W/O or O/W) had a high impact on the dripping technique and the capsules characteristics. The objective of this article was to elucidate the differences between the dripping techniques using both emulsions and compare the capsule properties (mechanical resistance and release of actives). The oil encapsulation using O/W emulsions was easier to perform and did not require the use of emulsion destabilisers. However, capsules produced from W/O emulsions were more resistant to compression and showed the slower release of actives over time. The findings detailed here widened the knowledge of the inverse gelation and gave opportunities to develop new techniques of oil encapsulation.

  3. Repercusiones sobre el bienestar y la calidad de la carne del manejo previo sacrificio de la trucha arcoíris

    OpenAIRE

    Bermejo Poza, Rubén

    2016-01-01

    La acuicultura es un sistema de producción animal en continuo crecimiento, llegando a superar a la producción de la pesca en los últimos años. Dentro de la producción acuícola, el cultivo de la trucha arcoíris (Oncorhynchus mykiss) es el tercero más importante a nivel mundial. Sin embargo, el bienestar animal y la calidad de la carne, íntimamente ligados entre sí, han cobrado una mayor importancia en acuicultura tanto en los productores como en los consumidores, siendo necesaria una investiga...

  4. NKS/SOS-1 Seminar on Safety analysis. Report from a seminar held on 22-23 March 2000 Risø National Laboratory, Roskilde, DK

    DEFF Research Database (Denmark)

    The report describes presentations and discussions at a seminar held at Risø on March 22-23, 2000. The title of the seminar was NKS/SOS-1 – Safety Analysis. It dealt with issues of relevance for the safety analysis for the entire nuclear safety field (notably reactors and nuclear waste repositories......). Such issues were: objectives of safety analysis, risk criteria, decision analysis, expert judgement and risk communication. In addition, one talk dealt with criteria for chemical industries in Europe. The seminar clearly showed that the concept of risk is multi-dimensional, which makes clarity...

  5. GrOW brochure

    International Development Research Centre (IDRC) Digital Library (Canada)

    Canada's International Development Research Centre (IDRC). It is housed within ... latory frameworks that restrict women's opportunities to engage fully in markets and ... growth could be harnessed to close persistent gender gaps in opportunities ... out policy implications, identifying what works and what does not work in ...

  6. OW COADS Climatology

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — COADS (Comprehensive Ocean-Atmosphere Data Set) is a ocean-atmosphere data set generated by means of in-situ (ship) measurements and reports from around the world's...

  7. OW Levitus Climatology

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset consists of global temperature and salinity climatologies with a spatial resolution of 1x1 degree, and consists of 19 levels (surface - 5000m). It was...

  8. Estimation of dose to the unborn child at diagnostic X-ray examinations based on data registered in RIS/PACS

    International Nuclear Information System (INIS)

    Helmrot, Ebba; Pettersson, Haakan; Sandborg, Michael; Alten, Jonas Nilsson

    2007-01-01

    The aim of this work was to determine mean absorbed doses to the unborn child in common conventional X-ray and computed tomography (CT) examinations and to find an approach for estimating foetal dose based on data registered in the Radiological Information System/Picture Archive and Communication System (RIS/PACS). The kerma-area product (KAP) and CT dose index (CTDI vol ) in common examinations were registered using a human-shaped female dosimetry phantom. Foetal doses, D f , were measured using thermoluminescent dosimeters placed inside the phantom and compared with calculated values. Measured foetal doses were given in relation to the KAP and the CTDI vol values, respectively. Conversion factor D f /KAP varies between 0.01 and 3.8 mGy/Gycm 2 , depending on primary beam position, foetus age and beam quality (tube voltage and filtration). Conversion factors D f /CTDI vol are in the range 0.02 - 1.2 mGy/mGy, in which the foetus is outside or within the primary beam. We conclude that dose conversion factors based on KAP or CTDI vol values automatically generated by the RIS/PACS system can be used for rapid estimations of foetal dose for common examination techniques. (orig.)

  9. Stabilizing effect of cetostearyl alcohol and glyceryl monostearate as co-emulsifiers on hydrocarbon-free O/W glyceride creams.

    Science.gov (United States)

    Ballmann, C; Mueller, B W

    2008-01-01

    The structure of a stable O/W cream is characterized by a more or less pronounced mixed crystal bilayer. The addition of co-emulsifiers in order to achieve a soft formulation often leads to a mixed crystal bilayer network of high viscosity and even phase separation. In order to ovoid this components of different chemical identities are used which often are not inert or harmless if they are absorbed. For this reason it seems to be interesting to use only components from one chemical family, e.g. to use only glycerides and their derivatives because in the case of absorption they are metabolized. The disadvantages of glyceride creams are, however, their low viscosity. The aim of this investigation was to find the optimum amount of co-emulsifier as consistency excipient for the basic formulation of an O/W glyceride cream. This was achieved by using differential scanning calorimetry; thermogravimetry, oscillation rheology and various stress tests. The amount of co-emulsifier used should not be too high, as it would crystallize increasingly during storage which gives the preparation an optical inhomogenity and a lack in softness which is needed for a suitable cosmetic acceptance. A slightly higher concentration than is necessary for the mixed emulsifier system can be advantageous, as the formation of a separate crystalline lipophilic network in the preparation increases its viscosity which will lead to a higher physico-chemical stability of the formulation. These results were obtained with the co-emulsifiers glyceryl monostearate (Imwitor 900), cetylstearyl alcohol (Lanette O), and PEG-20-glycerolstearate (Tagat S2) as O/W emulsifier. As oil phase a mixture of Miglyol 812 (caprylic/capric triglyceride) and Avocado oil was used.

  10. A novel method to produce solid lipid nanoparticles using n-butanol as an additional co-surfactant according to the o/w microemulsion quenching technique.

    Science.gov (United States)

    Mojahedian, Mohammad M; Daneshamouz, Saeid; Samani, Soliman Mohammadi; Zargaran, Arman

    2013-09-01

    Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) are novel medicinal carriers for controlled drug release and drug targeting in different roots of administration such as parenteral, oral, ophthalmic and topical. These carriers have some benefits such as increased drug stability, high drug payload, the incorporation of lipophilic and hydrophilic drugs, and no biotoxicity. Therefore, due to the cost-efficient, proportionally increasable, and reproducible preparation of SLN/NLC and the avoidance of organic solvents used, the warm microemulsion quenching method was selected from among several preparation methods for development in this research. To prepare the warm O/W microemulsion, lipids (distearin, stearic acid, beeswax, triolein alone or in combination with others) were melted at a temperature of 65°C. After that, different ratios of Tween60 (10-22.5%) and glyceryl monostearate (surfactant and co-surfactant) and water were added, and the combination was stirred. Then, 1-butanol (co-surfactant) was added dropwise until a clear microemulsion was formed and titration continued to achieve cloudiness (to obtain the microemulsion zone). The warm o/w microemulsions were added dropwise into 4°C water (1:5 volume ratio) while being stirred at 400 or 600 rpm. Lipid nanosuspensions were created upon the addition of the warm o/w microemulsion to the cold water. The SLN were obtained over a range of concentrations of co-surfactants and lipids and observed for microemulsion stability (clearness). For selected preparations, characterization involved also determination of mean particle size, polydispersity and shape. According to the aim of this study, the optimum formulations requiring the minimum amounts of 1-butanol (1.2%) and lower temperatures for creation were selected. Mono-disperse lipid nanoparticles were prepared in the size range 77 ± 1 nm to 124 ± 21 nm according to a laser diffraction particle size analyzer and transmission electron

  11. Developing novel one-step processes for obtaining food-grade O/W emulsions from pressurized fluid extracts: processes description, state of the art and perspectives

    OpenAIRE

    SANTOS, Diego Tresinari; MEIRELES, Maria Angela de Almeida

    2015-01-01

    Abstract In this work, a novel on-line process for production of food-grade emulsions containing oily extracts, i.e. oil-in-water (O/W) emulsions, in only one step is presented. This process has been called ESFE, Emulsions from Supercritical Fluid Extraction. With this process, emulsions containing supercritical fluid extracts can be obtained directly from plant materials. The aim in the conception of this process is to propose a new rapid way to obtain emulsions from supercritical fluid extr...

  12. Aplicación de microondas en el tratamiento de emulsiones del tipo agua en aceite (w/o) y aceite en agua (o/w).

    OpenAIRE

    PÉREZ PÁEZ, ROCIO

    2011-01-01

    Las emulsiones del tipo agua en aceite (w/o) y aceite en agua (o/w) están compuestas por una mezcla de aceite, agua, lodo y otros agentes. Se pueden encontrar en el proceso y/o en los vertidos de diferentes tipos de industrias, tales como refinerías de petróleo, plantas procesadoras de aceite de consumo, industrias farmacéuticas, industrias de alimentos, etc. El calentamiento de un material a una frecuencia de microondas depende de la frecuencia de la onda electromagnética y de las propie...

  13. Integração RIS/PACS no Hospital das Clínicas de Ribeirão Preto: uma solução baseada em "web" RIS/PACS integration at "Hospital das Clínicas de Ribeirão Preto": a web based solution

    Directory of Open Access Journals (Sweden)

    Paulo Mazzoncini de Azevedo-Marques

    2005-02-01

    Full Text Available OBJETIVO: Integração dos Sistemas de Informação em Radiologia (RIS - "Radiology Information System" e de Arquivamento e Comunicação de Imagens (PACS - "Picture Archiving and Communication System" no Serviço de Radiodiagnóstico do Hospital das Clínicas da Faculdade de Medicina de Ribeirão Preto da Universidade de São Paulo, para possibilitar a consulta remota de laudos e imagens associadas. MATERIAIS E MÉTODOS: A integração RIS/PACS implementada é feita em tempo real, no momento da consulta, utilizando tecnologias "web" e técnicas de programação para "intranet/internet". RESULTADOS: A aplicação "web" permite a consulta pela "intranet" do hospital dos laudos de exames e imagens associadas através de nome, sobrenome, número de registro hospitalar dos pacientes ou por modalidade, dentro de um determinado período. O visualizador possibilita que o usuário navegue pelas imagens, podendo realizar algumas funções básicas como "zoom", controle de brilho e contraste e visualização de imagens lado a lado. CONCLUSÃO: A integração RIS/PACS diminui o risco de inconsistências, através da redução do número de interfaces entre bases de dados com grande redundância de informação, proporcionando um ambiente de trabalho rápido e seguro para consulta de laudos radiológicos e visualização de imagens associadas.OBJECTIVE: Integration of the Radiology Information System (RIS and the Picture Archiving and Communication System (PACS of the Radiodiagnosis Service of "Hospital das Clínicas de Ribeirão Preto da Universidade de São Paulo", Brazil, to allow remote access to reports and associated images. MATERIALS AND METHODS: RIS/PACS integration occurs in real time at the moment of consultation, using web technologies and programming techniques for intranet/internet. RESULTS: This web application allows reports and associated images viewing through the medical center intranet. Search is based on the patients' first name, last

  14. Flux footprints for a tall tower in a land–water mosaic area: A case study of the area around the Risø tower

    DEFF Research Database (Denmark)

    Sogachev, Andrey; Dellwik, Ebba

    2017-01-01

    in the area surrounding the 122-m tower at Risø (Denmark), which is a mosaic of water, agricultural areas and forests. These heterogeneities are clearly reflected in the tower-based observations of the turbulence statistics from a profile of six sonic anemometers and are also reproduced by the flow model....... Using the two-dimensional mode of the model, in combination with the footprint estimator, we calculate the scalar flux footprints for the 122m eddy-covariance location and compare these results to analytical footprint estimators, which are only valid for homogeneous terrain, but are commonly applied...... also for heterogeneous terrain. Whereas the results by the analytical footprint estimator indicate smooth source areas regardless of the surface heterogeneities, the footprint estimator based on the micro-scale model indicates source hotspots, which have a stronger weight in the footprint. The hotspots...

  15. Effectiveness of water-air and octanol-air partition coefficients to predict lipophilic flavor release behavior from O/W emulsions.

    Science.gov (United States)

    Tamaru, Shunji; Igura, Noriyuki; Shimoda, Mitsuya

    2018-01-15

    Flavor release from food matrices depends on the partition of volatile flavor compounds between the food matrix and the vapor phase. Thus, we herein investigated the relationship between released flavor concentrations and three different partition coefficients, namely octanol-water, octanol-air, and water-air, which represented the oil, water, and air phases present in emulsions. Limonene, 2-methylpyrazine, nonanal, benzaldehyde, ethyl benzoate, α-terpineol, benzyl alcohol, and octanoic acid were employed. The released concentrations of these flavor compounds from oil-in-water (O/W) emulsions were measured under equilibrium using static headspace gas chromatography. The results indicated that water-air and octanol-air partition coefficients correlated with the logarithms of the released concentrations in the headspace for highly lipophilic flavor compounds. Moreover, the same tendency was observed over various oil volume ratios in the emulsions. Our findings therefore suggest that octanol-air and water-air partition coefficients can be used to predict the released concentration of lipophilic flavor compounds from O/W emulsions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Holdup of O/W emulsion in a packed column for liquid membrane separation of hydrocarbon; Tankasuiso no ekimaku bunri ni okeru jutento nai no emarushon horudo appu

    Energy Technology Data Exchange (ETDEWEB)

    Egashira, R.; Sugimoto, T.; Kawasaki, J. [Tokyo Inst. of Technology, Tokyo (Japan). Faculty of Engineering

    1993-07-10

    Liquid membrane separation of hydrocarbon is an energy saving separation method that is expected of practical use. If the method uses a packed column, the holdup of O/W emulsion affects the effective contact area and residence time of the emulsion. Therefore, this paper describes an attempt to correlate the dynamic emulsion holdup in a packed column in liquid membrane separation of hydrocarbon with property values of the emulsion and external oil phase, and operation variables. The experiment used a mixture of toluene + n - heptane + n - decane for oil phase in the O/W emulsion and saponin aqueous solution for liquid phase (liquid membrane phase). The packed column with an inner diameter of 37 mm used stainless steel McMahon packing. As a result of the experiment, the dynamic emulsion holdup showed a correlation according to the Reynolds number and Galilei number, regardless of whether the emulsion permeates the liquid membrane. The correlation made it possible to estimate in a simple manner the emulsion holdup in the packed column when this separation method is used. 5 refs., 3 figs., 3 tabs.

  17. Ignition et oxydation des particules de combustible solide pulvérisé Ignition and Oxidation of Pulverized Solid Fuel

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    Full Text Available On présente dans cet article, en utilisant la méthode du ruban chauffé, une étude de la compétition entre (1 la dévolatilisation et l'oxydation consécutive des produits de pyrolyse et (2 l'ignition de la matrice solide et sa combustion rapide. La comparaison entre le moment de l'ignition et le début de la pyrolyse permet de déterminer en fonction de la température, de la taille des particules et de la concentration en oxygène, le domaine dans lequel l'ignition d'un combustible solide pyrolysable est du type whole coal ignition (c'est-à-dire lorsque l'ignition intervient avant que la pyrolyse devienne mesurable. Les résultats suggèrent que ce type d'ignition doit s'effectuer en règle générale dans les conditions de mise en oeuvre des combustibles solides pulvérisés dans les flammes industrielles. Dans le cas de l'ignition whole coal , la vitesse de combustion de la matrice solide est inhibée dans la période qui suit l'ignition. Cette inhibition est due d'une part à la difficulté pour l'oxygène de diffuser dans les pores pendant la sortie des produits de pyrolyse, et d'autre part à la consommation préférentielle de l'oxygène dans l'oxydation des produits de pyrolyse, principalement dans le cas où cette oxydation se développe sous forme de flamme. Ce n'est que lorsque la pyrolyse s'achève que la vitesse de combustion hétérogène peut atteindre sa valeur stationnaire normale, qui est alors pratiquement identique à celle du coke. Aux températures situées entre la température d'ignition du combustible solide et la température d'extinction du coke résiduel, la combustion est incomplète, une extinction intervenant à un degré de dévolatilisation d'autant plus grande que la température est élevée. Ce phénomène s'explique qualitativement par la théorie classique d'ignition thermique lorsqu'on l'applique au cas particulier des combustibles solides pyrolysables. Les températures d'ignition ainsi que les d

  18. The influence of alkali fatty acids on the properties and the stability of parenteral O/W emulsions modified with solutol HS 15.

    Science.gov (United States)

    Buszello, K; Harnisch, S; Müller, R H; Müller, B W

    2000-03-01

    Arachis oil based parenteral O/W emulsions were prepared using soya bean phosphatidylcholine (SPC) and different combinations of co-emulsifiers containing polyethylene glycol fatty acid esters (Solutol HS 15) and alkali fatty acids (sodium laurate, sodium stearate). The parameters measured were droplet size (both by photon correlation spectroscopy and laser diffractometry), pH and zeta potential. All emulsions were subjected to autoclaving. The addition of polyethylene glycol 12-hydroxy stearate (Solutol HS 15) led to a significant decrease of mean oil droplet size. For long-term stability the amount added turned out to be the most important factor. With increased amounts of Solutol HS 15 the packing density of the emulsifier layer and the zeta potential decreased leading to instability. The optimum load of Solutol HS 15 was found to be 15 micromol/ml. Alkali fatty acids markedly improved the physical stability of the emulsions. Improved stability properties conferred to emulsions by alkali fatty acids could be attributed to the zeta potential increase even in the presence of Solutol HS 15. Consequently a mixed emulsifier film was established in which the ionized fatty acids determined the interface charge. In addition to this a strengthening of the molecular interactions occurring between phospholipid and Solutol HS 15 emulsifier in the presence of ionized fatty acids at the O/W interface can be assumed (L. Rydhag, The importance of the phase behaviour of phospholipids for emulsion stability, Fette Seifen Anstrichm. 81 (1979) 168-173). Different co-emulsifier mixtures were shown to have a pronounced impact on the plasma protein adsorption onto emulsion droplets.

  19. Consolidation and Decomposition of APR1400 NRC Design Certification Processes for Collaborative and Accelerated Processing

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Chul [FNC Technology Co., Yongin (Korea, Republic of); Kang, Deog Ji [KNHP, Daejeon (Korea, Republic of)

    2016-05-15

    KEPCO and KHNP are conducting APR1400 Design Certification from NRC. For the proper management of processes and information, a system called RIS (Regulatory Information management System) has been implemented by FNC from 2014, and it is on the final stage. In retaining the certification from NRC, RIS will be a very essential role by providing platform for collaborative and accelerated processing of responses to RAI (Request of Additional Information). Preparation of responses to RAI with this kind of systematic approach may be the first in the world. Westinghouse is doing manually and using MS Excel to collect the processing status. Where as, RIS will enable each member can do his own job and collect the status automatically. In this paper, how collaborative and accelerated processing of responses to RAI can be enabled will be described, and further enhancements will also be discussed. It handles MS Word directory with the help of VSTO. And with the help of Aspose.Total for .NET, the prepared response to RAI meets NRC's requirements. Through some further work and direct integration with requirement management solution, RIS can be expanded to cover a prior impact notice in case of DCD being altered.

  20. LIBERDADE, DIVERSIDADE E EXCESSOS SOB AS CORES DO ARCO-ÍRIS: REFLEXÕES SOBRE A RAINBOW FEST JUIZ DE FORA

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Santos Maia

    2012-12-01

    Full Text Available A liberdade e a diversidade assentadas em excessos são constitutivas das paradas do orgulho gay, ou paradas LGBT, em sentido mais amplo. Destacamos tais aspectos na Rainbow Fest em Juiz de Fora (MG, na qualocorrem, além da parada, palestras, shows com artistas e DJs, exposições, peças teatrais e exibição de filmes com temática LGBT. Durante a semana da Rainbow Fest, notamos que a cidade aparentemente “se veste” com as cores do arco-íris, e espaços regidos pela égide da heteronormatividade rompem com tal padrão e agregam símbolos da cultura LGBT. As reflexões, portanto, abordam a Rainbow Fest juizforana e suas relações com a cidade, examinando a maneira como liberdade e diversidade, permeadas de excessos, demarcam aespacialidade festiva. Metodologicamente, foram consultados material bibliográfico e reportagens de jornais locais, e realizou-se o trabalho de campo com emprego de entrevistas e tomadas de fotografias.

  1. Dzīves stila reklāma žurnālā "Cosmopolitan" (2008. gada janvāris - 2008. gada decembris)

    OpenAIRE

    Millere, Katrīna

    2009-01-01

    Bakalaura darbs “Dzīves stila reklāma žurnālā “Cosmopolitan” (2008.gada janvāris – 2008. gada decembris)” pievēršas tādai masu komunikācijas tēmai kā dzīves stila reklāma. Mūsdienu reklāmas pasaule ir tik dažāda un bagātīga ar patērētāju piesaistīšanas paņēmieniem. Tomēr ir reklāmas formāts, kas pārdod nevis preci, bet gan dzīves stilu. Patērētājs, iegādājoties kādu preci iedomājas, ka iegūst sev jaunu statusu. Tomēr vai tas tā ir? Vai arī reklāma meistarīgi spēlē ar cilvēku prātiem? Ba...

  2. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  3. Icterícia de íris após rabdomiólise por esforço em um equino Icterus iris after exertional rhabdomyolysis syndrome in a horse

    Directory of Open Access Journals (Sweden)

    Ubiratan Pereira de Melo

    2009-10-01

    Full Text Available Neste trabalho, é descrito um caso de icterícia de íris em equino da raça Paint. Ao exame clínico, foram observados tremores, dor muscular, relutância em andar, taquicardia, taquipnéia e icterícia de íris. As concentrações séricas de creatina cinase, aspartato aminotransferase, lactato desidrogenase e bilirrubina indireta estavam marcadamente elevadas. Com base na anamnese, sintomatologia clínica e bioquimica sérica, diagnosticou-se síndrome da rabdomiólise por esforço. Foram instituídos os seguintes tratamentos: terapia analgésica, fluidoterapia e restrição de exercício. Após seis dias, houve a remissão dos sinais clínicos e o retorno da coloração original da íris.One case of icterus iris diagnosed in an American Paint Horse is described. Stiffness, painful muscle, reluctance to move, elevated respiratory and heart rates, and icterus iris were observed in the clinical examination. Creatine kinase, aspartate aminotransferase, lactate dehydrogenase, alkaline phosphatase, and bilirubin levels were markedly elevated. Exertional rhabdomyolysis syndrome was diagnosed. Analgesic therapy, fluid therapy, and limited exercise were prescribed. After six days there was a remission of clinical signs and return the original color of the iris.

  4. Solid Oxide Fuel Cell Development at Topsoe Fuel Cell A/S and Risø National Laboratory

    DEFF Research Database (Denmark)

    Christiansen, Niels; Hansen, J B.; Larsen, H H.

    2007-01-01

    The consortium of Topsoe Fuel Cell A/S and Riso National Laboratory has up-scaled its production capacity of anode-supported cells to about 1100 per week. Stacks are based on a compact thin plate multilayer design with metallic interconnects and 12x12 cm(2) or 18x18 cm(2) foot print. Larger (500 ...... to include ethanol and coal syngas by development of a new coke resistant catalyst suitable for future SOFC technology....

  5. Hierarchical Network Design

    DEFF Research Database (Denmark)

    Thomadsen, Tommy

    2005-01-01

    Communication networks are immensely important today, since both companies and individuals use numerous services that rely on them. This thesis considers the design of hierarchical (communication) networks. Hierarchical networks consist of layers of networks and are well-suited for coping...... with changing and increasing demands. Two-layer networks consist of one backbone network, which interconnects cluster networks. The clusters consist of nodes and links, which connect the nodes. One node in each cluster is a hub node, and the backbone interconnects the hub nodes of each cluster and thus...... the clusters. The design of hierarchical networks involves clustering of nodes, hub selection, and network design, i.e. selection of links and routing of ows. Hierarchical networks have been in use for decades, but integrated design of these networks has only been considered for very special types of networks...

  6. Developing novel one-step processes for obtaining food-grade O/W emulsions from pressurized fluid extracts: processes description, state of the art and perspectives

    Directory of Open Access Journals (Sweden)

    Diego Tresinari SANTOS

    2015-01-01

    Full Text Available AbstractIn this work, a novel on-line process for production of food-grade emulsions containing oily extracts, i.e. oil-in-water (O/W emulsions, in only one step is presented. This process has been called ESFE, Emulsions from Supercritical Fluid Extraction. With this process, emulsions containing supercritical fluid extracts can be obtained directly from plant materials. The aim in the conception of this process is to propose a new rapid way to obtain emulsions from supercritical fluid extracts. Nowadays the conventional emulsion formulation method is a two-step procedure, i.e. first supercritical fluid extraction for obtaining an extract; secondly emulsion formulation using another device. Other variation of the process was tested and successfully validated originating a new acronymed process: EPFE (Emulsions from Pressurized Fluid Extractions. Both processes exploit the supercritical CO2-essential oils miscibility, in addition, EPFE process exploits the emulsification properties of saponin-rich pressurized aqueous plant extracts. The feasibility of this latter process was demonstrated using Pfaffia glomerata roots as source of saponin-rich extract, water as extracting solvent and clove essential oil, directly extracted using supercritical CO2, as a model dispersed phase. In addition, examples of pressurized fluid-based coupled processes applied for adding value to food bioactive compounds developed in the past five years are reviewed.

  7. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    Design - proces & metode iBog®  er enestående i sit fokus på afmystificering og operationalisering af designprocessens flygtige og komplekse karakter. Udgivelsen går bag om designerens daglige arbejde og giver et indblik i den kreative skabelsesproces, som designeren er en del af. Udover et bredt...... indblik i designerens arbejdsmetoder og designparametre giver Design - proces & metode en række eksempler fra anerkendte designvirksomheder, der gør det muligt at komme helt tæt på designerens virkelighed....

  8. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  9. Estabilidad a la congelación descongelación de emulsiones o/w preparadas con aislados de soja nativos y desnaturalizados con diferente solubilidad

    Directory of Open Access Journals (Sweden)

    Gonzalo Palazolo

    2011-05-01

    Full Text Available En este trabajo se evaluó la estabilidad a la congelación de emulsiones modelo aceite en agua (o/w preparadas con cuatro aislados de soja: dos nativos (ASN-1 y ASN-2, de similar composición pero diferente solubilidad, >90% y ~75%, respectivamente y dos desnaturalizados (ASD-1 y ASD-2, resultantes de calentar los respectivos aislados nativos (90 ‹C, 5 minutos. Las emulsiones preparadas con dispersiones acuosas al 2% p/v de ASN o ASD y aceite de girasol refinado (ƒ³ =0,25, se congelaron a -20 ‹C por 24 horas y luego se descongelaron a 20 ‹C. La estabilidad se evaluo a partir de medidas de distribución de tamano de partícula (difraccion laser y aceite liberado (AL, metodo de dilucion del colorante. Las emulsiones preparadas con ASN-2 y ASD-2 resultaron muy inestables despues de ser congeladas y descongeladas, resultadoque se evidenció por el aumento del tamano de partícula y un AL>25%. Al usar el aislado ASN-1 de mayor solubilidad, las emulsiones fueron mas estables y se observó un marcado incremento de la estabilidad cuando sus proteínas eran desnaturalizadas (ASD-1, no observándose prácticamente coalescencia ni aceite separado. En conclusión, la solubilidad y la desnaturalización proteíca de los aislados de soja son factores decisivos en la estabilidad de emulsiones frente a la congelación-descongelación.

  10. Caracterización de coproductos de la industria del fileteado de tilapia nilótica (oreochromis niloticus) y trucha arcoíris (oncorhynchus mykiss) en colombia

    OpenAIRE

    Osorio, A.; Wills, A.; Muñoz, A. P.

    2013-01-01

    La industria del fileteado de tilapia y trucha genera cantidades significativas de coproductos de los cuales no existe suficiente información disponible sobre su composición y calidad. Esta investigación determinó algunos componentes nutricionales y microbiológicos de coproductos obtenidos en plantas exportadoras de filetes de tilapia nilótica y trucha arcoíris en Colombia. El esqueleto mostró el mayor aporte de cenizas (tilapia: 14,12 ± 0,16%; trucha: 6,18 ± 0,06%), calcio (tilapia: 5,7...

  11. Rechnungsgrundlagen und Prämien in der Personen- und Schadenversicherung – Aktuelle Ansätze, Möglichkeiten und Grenzen. Proceedings zum 3. FaRis & DAV Symposium am 7. Dezember 2012 in Köln

    OpenAIRE

    Strobel, Jürgen; Nießen, Gero; Herrmann, Richard; Pasdika, Ulrich

    2013-01-01

    Die Prämienbestimmung ist nicht nur vor dem Hintergrund von Unisex ein über viele Versicherungssparten aktuell diskutiertes Thema. Häufige Veränderungen des Rechtsrahmens, die stete Entwicklung neuer Produkte, Weiterentwicklungen der Methoden und geänderte Anforderungen des Marktes beeinflussen die Wahl der Rechnungsgrundlagen als Basis der Prämienkalkulation. Einigen ausgewählten Fragestellungen aus diesem Umfeld ist das 3. FaRis & DAV-Symposium nachge-gangen. Dazu wurden Sterblichkeit und L...

  12. CARACTERIZACIÓN DE COPRODUCTOS DE LA INDUSTRIA DEL FILETEADO DE TILAPIA NILÓTICA (Oreochromis niloticus Y TRUCHA ARCOÍRIS (Oncorhynchus mykiss EN COLOMBIA

    Directory of Open Access Journals (Sweden)

    A. Osorio

    2013-01-01

    Full Text Available La industria del fileteado de tilapia y trucha genera cantidades significativas de coproductos de los cuales no existe suficiente información disponible sobre su composición y calidad. Esta investigación determinó algunos componentes nutricionales y microbiológicos de coproductos obtenidos en plantas exportadoras de filetes de tilapia nilótica y trucha arcoíris en Colombia. El esqueleto mostró el mayor aporte de cenizas (tilapia: 14,12 ± 0,16%; trucha: 6,18 ± 0,06%, calcio (tilapia: 5,70 ± 0,04%; trucha: 1,72 ± 0,08% y fósforo (tilapia: 1,89 ± 0,06%; trucha: 0,84 ± 0,03%, mientras que los recortes presentaron la mayor concentración de extracto etéreo (tilapia: 30,10 ± 0,58%; trucha: 17,50 ± 0,51% y la carne mecánicamente separada, los mayores contenidos de humedad (tilapia: 70,38 ± 0,18%; trucha: 72,93 ± 0,3% y proteína (tilapia: 14,32 ± 0,03%; trucha: 18,88 ± 0,05%. El mayor aporte de ácidos grasos polinsaturados (AGPI, como porcentaje del total de ácidos grasos identificados, se encontró en esqueleto de tilapia (17,27% y en recortes de trucha (38,68%, con relaciones n6/n3 de 2,67 y 0,71, respectivamente. En general, los coproductos estudiados cumplieron con los estándares microbiológicos exigidos por la normatividad colombiana (Resolución 122 de 2012 del Ministerio de Salud y Protección Social que establece los requisitos fisicoquímicos y microbiológicos que deben cumplir los productos de la pesca, en particular pescados, moluscos y crustáceos para consumo humano. Los resultados muestran que los coproductos estudiados contienen un importante aporte de proteína, cenizas, ácidos grasos poli-insaturados y adecuada calidad microbiológica, con potencial para alimentación humana o animal.

  13. OW CCMP Ocean Surface Wind

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Cross-Calibrated Multi-Platform (CCMP) Ocean Surface Wind Vector Analyses (Atlas et al., 2011) provide a consistent, gap-free long-term time-series of monthly...

  14. OW ASCAT Ocean Surface Winds

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Advanced Scatterometer (ASCAT) sensor onboard the EUMETSAT MetOp polar-orbiting satellite provides ocean surface wind observations by means of radar...

  15. Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Pettiway, Keon

    2017-01-01

    In this chapter, Ole B. Jensen takes a situational approach to mobilities to examine how ordinary life activities are structured by technology and design. Using “staging mobilities” as a theoretical approach, Jensen considers mobilities as overlapping, actions, interactions and decisions by desig...... by providing ideas about future research for investigating mobilities in situ as a kind of “staging,” which he notes is influenced by the “material turn” in social sciences....... with a brief description of how movement is studied within social sciences after the “mobilities turn” versus the idea of physical movement in transport geography and engineering. He then explains how “mobilities design” was derived from connections between traffic and architecture. Jensen concludes...

  16. Aspects chimiques de la combustion du charbon pulvérisé. Première partie Chemical Aspects of the Combustion of Pulverized Coal. Part One

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    Full Text Available II n'est pas facile de parvenir à une vue complète des multiples phénomènes chimiques dont la flamme de charbon pulvérisé est le siège. La présente étude bibliographique s'efforce de donner plus qu'une juxtaposition des données de la littérature récente, en risquant une tentative de présentation cohérente des mécanismes chimiques clés qui s'affrontent dans cette combustion. Ces mécanismes font intervenir des réactions en phase gazeuse relativement rapides (combustion des produits gazeux de pyrolyse, formation d'oxydes d'azote à partir de l'azote organique ainsi qu'un certain nombre de réactions hétérogènes très importantes (dévolatilisation pyrolysante rapide, oxydation du coke, réduction hétérogène d'oxydes d'azote qui peuvent se dérouler de façon beaucoup plus lente. En ce qui concerne ces dernières, le régime non isotherme, auquel les soumet l'existence de gradients de température dans la flamme industrielle, entraîne souvent des conséquences non négligeables pour le déroulement de ces mécanismes cinétiques complexes : ainsi la quantité et la composition des produits de pyrolyse est fortement tributaire de ces conditions non isothermes. Carrefour de plusieurs mécanismes chimiques complexes, la flamme de charbon est caractérisée chimiquement par un grand nombre de cas de compétition : a compétition entre différentes voies réactionnelles à l'intérieur d'un mécanisme donné ; à titre d'exemple typique : la pyrolyse du charbon ; b compétition entre phénomènes chimiques et physiques, également à l'intérieur d'un même mécanisme, entraînant la transition éventuellement réversible d'un régime cinétique vers un régime diffusionnel, comme c'est le cas dans l'oxydation du coke, avec des conséquences sensibles pour la vitesse réactionnelle globale et sa dépendance par rapport à la température, pouvant même aller jusqu'à l'extinction de la combustion du coke ; c compétition entre

  17. Speciation of 127I and 129I in atmospheric aerosols at Risø, Denmark: insight into sources of iodine isotopes and their species transformations

    Directory of Open Access Journals (Sweden)

    L. Zhang

    2016-02-01

    Full Text Available Speciation analysis of iodine in aerosols is a very useful approach for understanding geochemical cycling of iodine in the atmosphere. In this study, overall iodine species, including water-soluble iodine species (iodide, iodate and water-soluble organic iodine, NaOH-soluble iodine, and insoluble iodine have been determined for 129I and 127I in the aerosols collected at Risø, Denmark, during March and May 2011 (shortly after the Fukushima nuclear accident and in December 2014. The measured concentrations of total iodine are in the range of 1.04–2.48 ng m−3 for 127I and (11.3–97.0  ×  105 atoms m−3 for 129I, corresponding to 129I ∕ 127I atomic ratios of (17.8–86.8  ×  10−8. The contribution of Fukushima-derived 129I (peak value of 6.3  ×  104 atoms m−3 is estimated to be negligible (less than 6 % compared to the total 129I concentration in northern Europe. The concentrations and species of 129I and 127I in the aerosols are found to be strongly related to their sources and atmospheric pathways. Aerosols that were transported over the contaminated seas contained higher concentrations of 129I than aerosols transported over the European continent. The high 129I concentrations of the marine aerosols are attributed to secondary emission of marine discharged 129I in the contaminated seawater in the North Sea, North Atlantic Ocean, English Channel, Kattegat, etc., rather than direct gaseous release from the European nuclear reprocessing plants (NRPs. Water-soluble iodine was found to be a minor fraction to the total iodine for both 127I (7.8–13.7 % and 129I (6.5–14.1 % in ocean-derived aerosols, but accounted for 20.2–30.3 % for 127I and 25.6–29.5 % for 129I in land-derived aerosols. Iodide was the predominant form of water-soluble iodine, accounting for more than 97 % of the water-soluble iodine. NaOH-soluble iodine seems to be independent of the sources of aerosols. The significant

  18. Relationship between concentration of surfactant and pressure for droplet creation, and effect on droplet size in microchannel O/W emulsification; Maikurochaneru ni yoru O/W nyukaho ni okeru kaimen kasseizai nodo to ekiteki seisei atsuryoku no kankei, oyobi koreraga ekitekikei ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Kawakatsu, T.; Komori, H.; Oda, N.; Yonemoto, T. [Tohoku Univ., Sendai (Japan). Graduate School of Engineering

    1998-03-01

    O/W (oil in water) emulsion is produced by micro-channel emulsification method, and the effects of surfactant concentration on the pressures at which droplet generation starts and stops are evaluated in connection with the water phase and oil phase interfacial tension. In addition, the effects of surfactant concentration and operational pressure on the droplet size are investigated by measuring the generated droplet distribution, mean droplet size, standard deviation, geometrical standard deviation, and the possibility of producing mono-dispersion emulsion whose droplet size is large than 10 micron. The breakthrough pressure and the minimum pressure for droplet generation become low with the increase of SDS (sodium lauryl sulfate) concentration. The surfactant concentration, however, is found to have no effect on the breakthrough pressure and the minimum pressure for droplet generation when the SDS concentration exceeds the critical micelle concentration. It is true also for a system added with NaCl. As regards droplet size, uniform 20{mu}m droplet is obtained irrespective of the surfactant concentration and pressure. 13 refs., 10 figs., 2 tabs.

  19. A flow-first route-next heuristic for liner shipping network design

    DEFF Research Database (Denmark)

    Krogsgaard, Alexander; Pisinger, David; Thorsen, Jesper

    2018-01-01

    Having a well-designed liner shipping network is paramount to ensure competitive freight rates, adequate capacity on trade-lanes, and reasonable transportation times.The most successful algorithms for liner shipping network design make use of a two-phase approach, where they first design the routes...... different operators are used to modify the network. Since each iteration of the local search method involves solving a very complex multi-commodity flow problem to route the containers through the network, the flow problem is solved heuristically by use of a fast Lagrange heuristic. Although the Lagrange...... heuristic for flowing containers is 2–5% from the optimal solution, the solution quality is sufficiently good to guide the variable neighborhood search method in designing the network. Computational results are reported, showing that the developed heuristic is able to find improved solutions for large...

  20. Évaluation des esters méthyliques de tournesol isomérisés comme substitut de solvants (COV dans le domaine des peintures et vernis et assimilés

    Directory of Open Access Journals (Sweden)

    Chiên Hoang Lê

    2003-09-01

    Full Text Available L’étude a été consacrée à l’évaluation des performances techniques d’esters méthyliques isomérisés dans des applications ciblées de l’industrie des peintures et vernis où les solvants à remplacer sont des composés organiques volatils en grandes proportions, ce sont : les lasures (55 à 65 %, les vernis (45 à 55 %, les peintures laquées (35 à 40 %, les peintures satinées (40 à 45 % et les peintures anticorrosion (30 à 40 % de COV. Les esters méthyliques étudiés sont : -- les esters méthyliques de tournesol classique isomérisés cis-trans, -- les esters méthyliques de tournesol classique isomérisés trans-trans. Les résultats de cette étude ont démontré que les esters méthyliques conjugués de tournesol classique peuvent remplacer les solvants organiques volatils (white spirit par exemple des peintures murales (brillantes et satinées et des lasures. Ces esters jouent non seulement le rôle de solvant mais aussi celui d’un réactif de siccativation. En effet, ils participent à la formation du film de peinture ou de lasure au cours du séchage. En formulation de vernis et de lasures, les résultats montrent qu’il est possible d’incorporer des taux d’esters méthyliques de tournesol conjugués à hauteur de 10 %, ce qui permet de ramener le taux de COV de 550-650 g\\\\l à moins de 400 g\\\\l. En formulation de peintures laquées, la performance des esters méthyliques dépend non seulement du type de laque étudiée « brillante » ou « satinée » et surtout du système résine\\\\ETI (Esters de Tournesol Isomérisés. Les esters méthyliques conjugués peuvent être utilisés plus favorablement dans les laques brillantes, jusqu’à une concentration de 2,5 % en substitution des solvants hydrocarbonés habituels (white spirit D40 ou D60. Ils permettent dans ce cas d’augmenter sensiblement l’extrait sec, tout en restant conforme aux objectifs fixés par le CEPE pour les

  1. Research on Control Strategies of an Open-End Winding Permanent Magnet Synchronous Driving Motor (OW-PMSM-Equipped Dual Inverter with a Switchable Winding Mode for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Liang Chu

    2017-05-01

    Full Text Available An open-end winding permanent magnet synchronous motor (PMSM has a larger range of speed regulation than normal PMSM with the same DC voltage, and the control method is more flexible. It can also manage energy distribution between two power sources without a DC/DC converter. This paper aims at an electric vehicle equipped with OW-PMSM drive system with dual power sources and dual inverters; based on analyzing the external characteristics of each winding mode, we propose a winding mode switching strategy whose torque saturation judgmental algorithm, which is insensitive to motor’s parameters, could automatically realize upswitching of the winding mode. The proposed multi-level current hysteresis modulation algorithm could set the major power source and switch it at any time in independent mode, which accomplishes energy distribution between two power sources; its two control methods, low switching frequency method and high power difference method, could achieve different energy distribution effects. Simulation results confirm the validity and effectiveness of the winding mode switching strategy and current modulation method. They also show that an electric vehicle under the proposed control methods has better efficiency than one equipped with a traditional OW-PMSM drive system under traditional control.

  2. Método rápido para la cuantificación de leucocitos sanguíneos y su utilidad en la evaluación del estado de salud en trucha arcoíris Oncorhynchus mykiss

    Directory of Open Access Journals (Sweden)

    Libertad Alzamora-Gonzales

    2015-11-01

    Full Text Available El análisis de la proporción y cantidad de células sanguíneas es una forma muy confiable de evaluar el estado de salud en humanos y otras especies. El objetivo fue estandarizar una metodología para la cuantificación rápida de poblaciones de leucocitos sanguíneos de Oncorhynchus mykiss (trucha arcoíris. Se procesaron muestras de leucocitos obtenidos de la sangre de un grupo de truchas juveniles saludables mantenidas en el laboratorio. Las muestras fueron analizadas empleando el minicitómetro Scepter™ y los resultados fueron contrastados con los obtenidos por citometría de flujo. Los histogramas generados por ambos métodos mostraron un máximo correspondiente a la población de linfocitos/trombocitos y otro a la de monocitos/neutrófilos. No se encontraron diferencias significativas entre los resultados de ambos métodos (P > 0,05. El método con el minicitómetro se utilizó para evaluar muestras de truchas procedentes de una piscigranja, el perfil obtenido mostró la disminución significativa de neutrófilos compatible con los signos clínicos de enfermedad observados en los especímenes evaluados. Estos resultados indican que la metodología aplicada es válida y útil para determinar las concentraciones y proporciones celulares en muestras de sangre en trucha arcoíris y permiten el análisis rápido de su estado de salud.

  3. Cistos primários do epitélio pigmentar da íris e corpo ciliar: aspectos de biomicroscopia ultra-sônica Primary cysts of the iris and ciliary body pigment epithelium: ultrasound biomicroscopy features

    Directory of Open Access Journals (Sweden)

    Bernadete Ayres

    2000-10-01

    Full Text Available Objetivo: Descrever as características, incidência e distribuição dos cistos primários de epitélio pigmentar de íris e corpo ciliar ao exame de biomicroscopia ultra-sônica, que devem ser diferenciados de lesões sólidas. Métodos: Foram estudados de modo retrospectivo os prontuários de 73 pacientes, 82 olhos, com diagnóstico ecográfico de cisto primário de íris ou corpo ciliar durante o período de janeiro/97 a dezembro/99. Utilizou-se o biomicroscópio ultra-sônico, aplicando técnicas padronizadas de imersão. Resultados: À biomicroscopia ultra-sônica os cistos caracterizaram-se por apresentarem paredes finas e regulares, e conteúdo anecóico. Quarenta e oito pacientes (65,7% eram do sexo feminino. A maior incidência (28,8% ocorreu para o grupo incluído no intervalo de 20 a 29 anos de idade. Observou-se uma característica distribuição, predominantemente nos quadrantes temporais inferiores. Conclusões: A biomicroscopia ultra-sônica mostrou-se útil no diagnóstico de cistos primários do epitélio pigmentar da íris e do corpo ciliar, auxiliando na diferenciação de patologias tumorais e avaliando possíveis complicações. O conhecimento dos critérios ecográficos e da distribuição epidemiológica facilitam o diagnóstico destas lesões.Purpose: To describe the ultrasound biomicroscopic characteristics, incidence, distribution and location of primary cysts of the iris and ciliary body pigment epithelium, and to differentiate them from solid lesions. Methods: A retrospective study was performed through a review of charts of 73 patients, 82 eyes, with echographic diagnosis of primary cysts of the iris and ciliary body pigment epithelium during a 36-month period (January/97 through December/99. All examinations were performed using an ultrasound biomicroscope applying standard immersion techniques. Results: Ultrasound biomicroscopy revealed typical findings of the primary cysts of the pigment epithelium such as thin

  4. Speciation of 127I and 129I in atmospheric aerosols at Risø, Denmark: insight into sources of iodine isotopes and their species transformations

    DEFF Research Database (Denmark)

    Zhang, Luyuan; Hou, Xiaolin; Xu, Sheng

    2016-01-01

    iodine have been determined for 129I and 127I in the aerosols collected at Risø, Denmark, between March and May 2011 (shortly after the Fukushima nuclear accident) and in December 2014. The measured concentrations of total iodine are in the range of 1.04–2.48 ng m−3 for 127I and (11.3–97.0) × 105 atoms m...... in the aerosols are found to be strongly related to their sources and atmospheric pathways. Aerosols that were transported over the contaminated ocean, contained higher amounts of 129I than aerosols transported over the European continent. The high 129I concentrations of the marine aerosols are attributed...... to secondary emission from heavily 129I-contaminated seawater rather than primary gaseous release from nuclear reprocessing plants. Water-soluble iodine was found to be a minor fraction to total iodine for both 127I (7.8–13.7 %) and 129I (6.5–14.1 %) in ocean-derived aerosols, but accounted for 20...

  5. Speciation of 127I and 129I in atmospheric aerosols at Risø, Denmark: insight into sources of iodine isotopes and their species transformations

    DEFF Research Database (Denmark)

    Zhang, Luyuan; Hou, Xiaolin; Xu, Sheng

    2015-01-01

    iodine have been determined for 129I and 127I in the aerosols collected at Risø, Denmark, between March and May 2011 (shortly after the Fukushima nuclear accident) and in December 2014. The measured concentrations of total iodine are in the range of 1.04–2.48 ng m−3 for 127I and (11.3–97.0) × 105 atoms m...... in the aerosols are found to be strongly related to their sources and atmospheric pathways. Aerosols that were transported over the contaminated ocean, contained higher amounts of 129I than aerosols transported over the European continent. The high 129I concentrations of the marine aerosols are attributed...... to secondary emission from heavily 129I-contaminated seawater rather than primary gaseous release from nuclear reprocessing plants. Water-soluble iodine was found to be a minor fraction to total iodine for both 127I (7.8–13.7 %) and 129I (6.5–14.1 %) in ocean-derived aerosols, but accounted for 20...

  6. A cluster-randomised, parallel group, controlled intervention study of genetic prostate cancer risk assessment and use of PSA tests in general practice--the ProCaRis study

    DEFF Research Database (Denmark)

    Kirkegaard, Pia; Vedsted, Peter; Edwards, Adrian

    2013-01-01

    PSA-testen er det bedste og mest anvendte værktøj til at opspore prostatacancer. Testen er dog behæftet med fejlkilder, som kan føre til overflødig udredning, diagnosticering og behandling. Ved udredning tages biopsier med risiko for behandlingskrævende infektion. Behandlingen for prostatacancer...... fører ofte til vandladningsproblemer og impotens, og den har ikke vist sig specielt effektiv i behandling af den aggressive prostatacancer. Risikoen for overdiagnostik og overbehandling betyder, at PSA-testen ikke anvendes til generel screening for prostatakræft. Alligevel får mange patienter taget en...... PSA-test - ofte flere gange - måske fordi de ser sig selv som værende i særlig risiko. I ProCaRis-studiet får udvalgte praksis i Region Midtjylland mulighed for at tilbyde en genetisk risikovurdering for prostatakræft til patienter, som skal have en PSA-test. Den genetiske risikovurdering kan afgøre...

  7. Desenvolvimento e estudos de estabilidade preliminares de emulsões O/A contendo Cetoconazol 2,0% = Development and Preliminary Stability Evaluations of O/W emulsion containing Ketoconazole 2.0%

    Directory of Open Access Journals (Sweden)

    Vanessa Catalá Casteli

    2008-07-01

    Full Text Available O objetivo deste trabalho foi desenvolver emulsões O/A contendo Cetoconazol 2,0% e avaliar sua estabilidade preliminar por meio da análise de suas características físicoquímicas, tais como homogeneidade, formação de agregados, floculação, cremeação ecoalescência. As emulsões foram formuladas utilizando diferentes bases autoemulsionantes, compostas por álcool cetoestearílico, álcool etoxilado, álcool graxos superiores, ácido esteárico, lanolina e outros. As emulsões foram submetidas aos testes de centrifugação,estresse térmico e ciclo gela-degela, e suas características organolépticas e físico-químicas foram avaliadas no início e no final de cada ensaio. Todas as amostras mantiveram sua homogeneidade após o teste de centrifugação, mas somente os sistemas preparados comceras autoemulsionáveis constituídas por álcool graxos superiores (Polawax NF® e Copolímero de Amônio Acriloil dimetiltaurato VP, Trilauril 4 fosfato, Sesquisosterato de metil glicose, Óleo de flores de verão e Tetradibutil pentaeritritil hidroxihidrocinamato deGlicerina (Hostacerin NCB® mantiveram sua estabilidade após testes de estresse térmico e ciclo gela-degela.The objective of this work was the development of O/W emulsions containing Ketoconazole 2.0% and to evaluate their preliminary stability by analyzing physical-chemical characteristics such as homogeneity, aggregation formation, flocculation, creaming and coalescence. The emulsions were formulated using different self-emulsifying bases, composed of cetearyl alcohol, ethoxylalcohol, higher fatty alcohol, stearic acid, lanolin and others. The O/W emulsions were evaluated by centrifugation test, thermal stress test, and freezing/defrosting cycles, and its organoleptic and physical-chemistry characteristics were analyzed before and after eachassay. All samples maintained their homogeneity after the centrifugation test, but only the systems prepared with self emulsifying composed of

  8. Design and simulation of the rotating test rig in the INDUFLAP project

    DEFF Research Database (Denmark)

    Barlas, Thanasis K.; Aagaard Madsen, Helge; Løgstrup Andersen, Tom

    The general description and objectives of the rotating test rig at the Risø campus of DTU are presented, as used for the aeroelastic testing of a controllable rubber trailing edge flap (CRTEF) system in the INDUFLAP project. The design of all new components is presented, including the electrical...... drive, the pitch system, the boom, and the wing/flap section. The overall instrumentation of the components used for the aeroelastic testing is described. Moreover, the aeroelastic model simulating the setup is described, and predictions of steady and dynamic loading along with the aeroelastic analysis...

  9. The influence of asphaltenes of the petroleum on the rheology of O/W (Oil/Water) emulsions; Influencia de asfaltenos do petroleo sobre a reologia de emulsoes O/A (Oleo/Agua)

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Ronaldo Goncalves dos; Mohamed, Rahoma Sadeg; Loh, Watson; Bannwart, Antonio Carlos [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil)

    2004-07-01

    Heavy oils represent a large fraction of the Brazilian petroleum reserves and display a great potential for application as substitute to the conventional oils, provided a suitable technology for their transportation is available. The high viscosity of these heavy oils leads to high flow resistance and increase in the recovery and transportation costs. Methodologies employed to reduce these problems involve application of heat of addition of diluents or lighter oils, but are associated with high costs. Formation of low viscosity oil-in-water emulsions has been proposed as an alternative for the transportation of heavy oils, as investigated in this work. Preliminary results indicate significant viscosity decreases upon emulsification of heavy oils (viscosities greater than 1,000 cP) forming o/w emulsions with high oil content (between 50-65 vol. %), which display viscosities within 4-25 cP. Additionally, the effect of different surfactants, methodology of preparation and oil asphaltene content on the emulsion stability was also evaluated. These results confirm the potential of emulsification as a viable methodology for heavy oil transportation. (author)

  10. Bioaccessibility and Cellular Uptake of β-Carotene Encapsulated in Model O/W Emulsions: Influence of Initial Droplet Size and Emulsifiers

    Directory of Open Access Journals (Sweden)

    Wei Lu

    2017-09-01

    Full Text Available The effects of the initial emulsion structure (droplet size and emulsifier on the properties of β-carotene-loaded emulsions and the bioavailability of β-carotene after passing through simulated gastrointestinal tract (GIT digestion were investigated. Exposure to GIT significantly changed the droplet size, surface charge and composition of all emulsions, and these changes were dependent on their initial droplet size and the emulsifiers used. Whey protein isolate (WPI-stabilized emulsion showed the highest β-carotene bioaccessibility, while sodium caseinate (SCN-stabilized emulsion showed the highest cellular uptake of β-carotene. The bioavailability of emulsion-encapsulated β-carotene based on the results of bioaccessibility and cellular uptake showed the same order with the results of cellular uptake being SCN > TW80 > WPI. An inconsistency between the results of bioaccessibility and bioavailability was observed, indicating that the cellular uptake assay is necessary for a reliable evaluation of the bioavailability of emulsion-encapsulated compounds. The findings in this study contribute to a better understanding of the correlation between emulsion structure and the digestive fate of emulsion-encapsulated nutrients, which make it possible to achieve controlled or potential targeted delivery of nutrients by designing the structure of emulsion-based carriers.

  11. Externally predictive single-descriptor based QSPRs for physico-chemical properties of polychlorinated-naphthalenes: Exploring relationships of log S{sub W}, log K{sub OA}, and log K{sub OW} with electron-correlation

    Energy Technology Data Exchange (ETDEWEB)

    Chayawan; Vikas, E-mail: qlabspu@pu.ac.in

    2015-10-15

    Highlights: • Aqueous solubility and partition coefficient are modelled using single-parameter. • Electron-correlation observed as a vital predictorof physico-chemical properties. • For octanol-air partition coefficient, energy and polarizability yield best models. • Dipole-moment is found to be worst single-descriptor for the properties analysed. - Abstract: Quantitative structure–property relationships (QSPRs), based only on a single-parameter, are proposed for the prediction of physico-chemical properties, namely, aqueous solubility (log S{sub W}), octanol–water partition coefficient (log K{sub OW}) and octanol–air partition coefficient (log K{sub OA}) of polychloronaphthalenes (PCNs) including all the 75 chloronaphthalene congeners. The QSPR models are developed using molecular descriptors computed through quantum mechanical methods including ab-initio as well as advanced semi-empirical methods. The predictivity of the developed models is tested through state-of-the-art external validation procedures employing an external prediction set of compounds. To analyse the role of instantaneous interactions between electrons (the electron-correlation), the models are also compared with those developed using only the electron-correlation contribution of the quantum chemical descriptor. The electron-correlation contribution towards the chemical hardness and the LUMO energy are observed to be the best predictors for octanol–water partition coefficient, whereas for the octanol–air partition coefficient, the total electronic energy and electron-correlation energy are found to be reliable descriptors, in fact, even better than the polarisability. For aqueous solubility of PCNs, the absolute electronegativity is observed to be the best predictor. This work suggests that the electron-correlation contribution of a quantum-chemical descriptor can be used as a reliable indicator for physico-chemical properties, particularly the partition coefficients.

  12. Modélisation et automatisation des procédés d’écriture et de production de supports de formation numérisés - Le modèle M.A.Ï.HEU.T.I.C. de la CCI de Paris

    Directory of Open Access Journals (Sweden)

    José Martin

    2005-01-01

    Full Text Available Cet article expose les conclusions d’un projet de recherche de la Direction de l’Enseignement de la Chambre de Commerce et d’Industrie de Paris (CCIP, mené de 2003 à 2005, dont l’aboutissement est un modèle didactique de production de contenus de cours numérisés, baptisé M.A.Ï.HEU.T.I.C.[[ M.A.Ï.HEU.T.I.C. : Modèle Appliqué d’Interprétation Heuristique des Technologies de l’Information et de la Communication.

  13. Isolation and characterization of hemolytic bacteria Fish disc and Neon RainbowIsolamento e caracterização de bactérias hemolíticas de Acará Disco e Neon Arco-Íris

    Directory of Open Access Journals (Sweden)

    José Luiz Pedreira Mouriño

    2012-05-01

    Full Text Available The aim of this study was to isolate, identify and determine the ability of potential pathogenic bacteria hemolytic mite Disco (Symphysodon discus and Neon Rainbow (Melanotaenia praecox, and define which of the antibiotic Trimethoprim, Florfenicol, Chloramphenicol, Norfloxacin, Erythromycin, Bacitracin, Enrofloxacin, Tetracycline, and Furazolidone Clindamycin has better inhibitory effect in vitro, and determine the minimum inhibitory concentration (MIC for Chloramphenicol, Norfloxacin, Erythromycin and Enrofloxacin. In an outbreak of ornamental fish deaths were isolated nine strains of Gram negative, hemolytic where 3 were identified, two as Vibrio cholerae and one as Citrobacter braakii. With these strains were performed antibiogram and was determined the minimum inhibitory concentration at two different temperatures (22 and 30 ° C. Antibiotics Enrofloxacin, Norfloxacin, florfenicol, chloramphenicol and trimethoprim showed the best results in vitro inhibition against the Vibrio cholerae, and Citrobacter braakii. The MIC increased in 30 ° C for erythromycin and enrofloxacin against pathogens, while for Florfenicol and norfloxacin the MIC was not influenced by temperature.O objetivo deste estudo foi isolar, identificar e determinar a capacidade hemolítica de possíveis bactérias patogênicas do Acará Disco (Symphysodon discus e Neon Arco-íris (Melanotaenia praecox, e definir qual o antibiótico entre Trimetoprim, Florfenicol, Cloranfenicol, Norfloxacina, Eritromicina, Bacitracina, Enrofloxacina, Tetraciclina, Furazolidona e Clindamicina possui melhor efeito inibitório in vitro, e determinar a concentração inibitória mínima (MIC para Cloranfenicol, Norfloxacina, Eritromicina e Enrofloxacina. Em um surto de mortalidade de peixes ornamentais foram isoladas nove cepas de bactérias Gram negativas, onde três hemolíticas foram identificadas, duas como Vibrio cholerae e uma como Citrobacter braakii. Com estas foram realizados antibiogramas

  14. Energy management in Japan. Consequences for RIs

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Japan is eager to host the ILC, the International Linear Collider Project. One of the issues in realizing such a large accelerator facility in Japan would be assuring a satisfactory supply of electrical power. As is well known, after the Tohoku - Pacific Ocean Earthquake in March 11, 2011, most Japanese nuclear power plants have been off-line. Prior to that, up to 30% of the demand on the electrical grid was supplied by nuclear power. While there is no prospect for resumption of reactor operations, a rapid increase of the generation capacity of fossil fuel plants has allowed Japanese industries and domestic life to survive without major disruption, thought it has worsened the trade imbalance. In any case, we must be realistic in preparing an energy management plan for our Research Institutes where large-scale energy consumers are. Already for many years laboratories such as TRISTAN, KEKB and J-PARC have scheduled their operations so that they could contract to draw minimal power during the summer cooling sea...

  15. Basic demands for radiological information systems (RIS)

    International Nuclear Information System (INIS)

    Traupe, H.; Purgold, S.

    1993-01-01

    One of the most important problems in medicine today is quality control and the achievement of a cost-benefit analysis in the areas of both treatment and diagnosis. With modern software techniques, complex relations between medical and aministrative data can be shown up and analysed. Preconditions are a vocabulary that can be processed by computer for medical facts and decisions and a database system capable of collecting a large amount of heterogeneous data and costing everything precisely. We have developed an object description language and, on the basis of the relational database approach, a complex system covering most aspects of medical and administrative data handling in radiology. The basic demands and elements of modern information handling in radiology are described and discussed. (orig.) [de

  16. OW NOAA GOES Sea-Surface Temperature

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains satellite-derived sea-surface temperature measurements collected by means of the Geostationary Orbiting Environmental Satellite. The data is...

  17. OW NASA SeaWIFS Ocean Color

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains satellite-derived sea-surface ocean color (chlorophyll-a) measurements collected by means of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS)...

  18. OW NASA MODIS Aqua Ocean Color

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains satellite-derived sea-surface ocean color (chlorophyll-a) measurements collected by means of the Moderate Resolution Imaging Spectroradiometer...

  19. OW FREQUENCY ULTRASOUND APPLICATION IN KNEE ARTHROSCOPY

    Directory of Open Access Journals (Sweden)

    V. V. Pedder

    2016-01-01

    Full Text Available Purpose: in vitro study of ultrasound dissection devices' impact on meniscus and knee cartilage as well as comparison of outcomes with familiar arthroscopic techniques.Materials and methods. Meniscus and joint cartilage specimen obtained during total knee replacement were placed in a normal saline. All experiments were conducted no later than in 2 hours after obtaining and followed by histology of biopsy specimens. In the first series of experiment the authors performed meniscus dissection with ultrasound instrument «Scalpel», cold plasm ablator and surgical scalpel.Results. The first series of experiments demonstrated disruption of fibers orientation on meniscus rim after dissection with scalpel; necrosis depth after coblation is 0,7-0,8 mm. Ultrasound dissection devices leave necrosis depth of 0,1-0,2 mm and smooth cartilage surface. The second series of experiments proved that after shaver application cartilage surface was coarse; certain necrosis sections of 16-90 nm were observed on relatively smooth cartilage surface after coblation. Application of ultrasound «Miller» device leaves smooth cartilage surface with no fibers, no signs of cartilage thinning and necrosis not exceeding 15 nm.Conclusion. The results of experiments confirm that use of low frequency ultrasound dissection devices is advantageous as compared to mechanical and ablation cutting techniques while ensuring histologically proven atraumatic handling of biopsy specimens of meniscus and hyaline cartilage.

  20. Yield and approximate composition of in natura and pre-cooked rainbow trout (Oncorhynchus mykiss (Wallbaum fillets of different weight Rendimento e composição centesimal de filés in natura e pré-cozido em truta arco-íris, Oncorhynchus mykiss (Wallbaum

    Directory of Open Access Journals (Sweden)

    Elisabete Maria Macedo-Viegas

    2002-04-01

    Full Text Available The aim of this work was to evaluate the weight classes (CP and processing form (FP effects on rainbow trout Oncorhynchus mykiss (Wallbaum (Salmoniformes, Salmonidae yield and approximate composition. The assays were carried out in a completely randomized factorial design. The analyzed variables were weight classes (CP1=300 up to 345g; CP2= 350 up to 395g and CP3= 400 up to 445g and processing form (FP1= iin natura fillet and FP2= pre-cooked fillet. The CP and FP showed significant effect on fillet yield, but they didn’t show interaction effect (p > 0.05. The CP2 class showed higher fillet yield (44.81% than CP1 (41.70% and CP3 (42.81%. Regarding the processing form, the yield of in natura fillet (44.51% was higher (p in natura fillet (6.16% with p 0.05 among the analyzed CP. The approximate composition in the CP showed significant effect (p 1= 73.25%, CP2= 72.19% e CP3= 73.03%. The FP analysis of in natura fillets showed higher values (p in natura fillets from classes CP1 (74.86% and CP3 (73.90%, although no difference was observed in the pre-cooked class. The contents of crude protein (19.05% and ash (1.16% were lower (p Com o objetivo de avaliar o efeito da classe de peso (CP e forma de processamento (FP da truta arco-íris, Oncorhynchus mykiss (Wallbaum (Salmoniformes, Salmonidae sobre o rendimento e a composição centesimal dos filés, foi realizado o experimento em um delineamento inteiramente casualizado, em um esquema fatorial 3x2 (três classes de peso, CP1= 300 a 345g, CP2= 350 a 395g e CP3= 400 a 445g e duas formas de processamento, FP1 = filé in natura, e FP2= filé pré-cozido. As CP e FP tiveram influência significativa sobre o rendimento de filés, porém, não houve interação (p > 0,05 entre esses parâmetros. A classe CP2 apresentou maior rendimento de filé (44,81% em relação à CP1 (41,70% e CP3 (42,81%. Quanto às formas de processamento, o rendimento dos filés in natura (44,51% foi superior (p in natura (6

  1. Optical Design of Porous ZnO/TiO2 Films for Highly Transparent Glasses with Broadband Ultraviolet Protection

    Directory of Open Access Journals (Sweden)

    Han Sung Song

    2017-01-01

    Full Text Available We present a design of a bilayer porous film structure on a glass substrate for the highly efficient ultraviolet (UV protection with high visible-light transparency. To effectively block UVB (280–315 nm and UVA (315–400 nm, titanium dioxide (TiO2 and zinc oxide (ZnO are used as absorbing layers having the appropriate coverages in different UV ranges with extinction coefficients, respectively. We show the process of refractive index (RI matching by controlling porosity (Pr. Effective RIs of porous media with TiO2 and ZnO were calculated based on volume averaging theory. Transmittances of the designed films with different effective RIs were calculated using rigorous coupled-wave analysis method. Using admittance loci method, the film thickness was optimized in center wavelengths from 450 to 550 nm. The results show that the optimal design provides high UV shielding performance at both UVA and UVB with high transparency in the visible range. We also analyze electrical field distributions in each layer and angle dependency with 3D HSV color map.

  2. Design of a micro-irrigation system based on the control volume method

    Directory of Open Access Journals (Sweden)

    Chasseriaux G.

    2006-01-01

    Full Text Available A micro-irrigation system design based on control volume method using the back step procedure is presented in this study. The proposed numerical method is simple and consists of delimiting an elementary volume of the lateral equipped with an emitter, called « control volume » on which the conservation equations of the fl uid hydrodynamicʼs are applied. Control volume method is an iterative method to calculate velocity and pressure step by step throughout the micro-irrigation network based on an assumed pressure at the end of the line. A simple microcomputer program was used for the calculation and the convergence was very fast. When the average water requirement of plants was estimated, it is easy to choose the sum of the average emitter discharge as the total average fl ow rate of the network. The design consists of exploring an economical and effi cient network to deliver uniformly the input fl ow rate for all emitters. This program permitted the design of a large complex network of thousands of emitters very quickly. Three subroutine programs calculate velocity and pressure at a lateral pipe and submain pipe. The control volume method has already been tested for lateral design, the results from which were validated by other methods as fi nite element method, so it permits to determine the optimal design for such micro-irrigation network

  3. Estimation of Most Favorable Optical Window Position Subject to Achieve Finest Optical Control of Lateral DDR IMPATT Diode Designed to Operate at W-Band

    Directory of Open Access Journals (Sweden)

    A. Acharyya

    2014-06-01

    Full Text Available The optimum position of the optical window (OW of illuminated lateral double-drift region (DDR impact avalanche transit time (IMPATT device has been determined subject to achieve the finest optical control of both DC and RF properties of the device. The OW is a tiny hole that has to be created on the oxide layer through which the light energy of appropriate wavelength can be coupled to the space charge region of the device. A non-sinusoidal voltage is assumed to be applied across the diode and the corresponding terminal current response is obtained from a two-dimensional (2-D large-signal (L-S simulation technique developed by the authors for illuminated lateral DDR IMPATT diode. Both the DC and L-S properties of the illuminated device based on Si, designed to operate at W-band frequencies (75 – 110 GHz are obtained from the said L-S simulation. Simulation is carried out for different incident optical power levels of different wavelengths (600 – 1000 nm by varying the position of the fixed sized OW on the oxide layer along the direction of electrical conduction of the device. Results show that, the most favorable optical tuning can be achieved when the OW is entirely created over the p-type depletion layer, i.e. when the photocurrent is purely electron dominated. Also the 700 nm wavelength is found to be most suitable wavelength for obtaining the maximum optical modulation of both DC and RF properties of the device.

  4. Biomicroscopia ultra-sônica (UBM no planejamento cirúrgico e acompanhamento pós-operatório de melanomas malignos de íris e corpo ciliar Ultrasound biomicroscopy (UBM in the surgical planning and postoperative follow-up of iris and ciliary body melanomas

    Directory of Open Access Journals (Sweden)

    Zélia Maria da Silva Corrêa

    2003-08-01

    Full Text Available OBJETIVO: Estudar os achados da biomicroscopia ultra-sônica (UBM em melanomas malignos primários da íris e corpo ciliar antes e depois da resecção cirúrgica e correlacionar a extensão do tumor (revelado pela biomicroscopia ultra-sônica aos achados histopatológicos. MÉTODOS: Estudo prospectivo de 5 pacientes com diagnóstico clínico de tumor de íris e/ou corpo ciliar. Estes pacientes foram avaliados pela biomicroscopia ultra-sônica antes e após iridociclectomia ou iridectomia. Os espécimens foram enviados para estudo histopatológico. Os pacientes foram acompanhados por período mínimo de 6 meses quando foi realizada nova biomicroscopia ultra-sônica. RESULTADOS: Neste grupo de 5 pacientes, 3 eram do sexo feminino e 2, do masculino, variação de idade de 32 e 64 anos. Todos os casos eram unilaterais. Quatro pacientes apresentaram massa iridociliar e um apresentou lesão limitada à íris. Em todos os casos a biomicroscopia ultra-sônica auxiliou o planejamento cirúrgico para a ressecção tumoral com margens livres. A biomicroscopia ultra-sônica no pós-operatório revelou ausência de crescimento tumoral em todos os casos, sendo que 2 pacientes apresentaram vítreo na incisão cirúrgica, 1 deles com tração vítrea leve, mas sem sinais de descolamento de retina. CONCLUSÃO: A biomicroscopia ultra-sônica pareceu ser método auxiliar confiável para diagnosticar tumores de íris e corpo ciliar, planejar o tratamento cirúrgico e o acompanhamento pós-operatório.PURPOSE: To study pre-operatively and post-operatively ultrasound biomicroscopy (UBM findings of iris and ciliary body melanomas and correlate tumor extension (revealed by ultrasound biomicroscopy with histopathology findings. METHODS: Prospective study of 5 patients with a clinical diagnosis of iris and ciliary body tumors. These patients were evaluated by ultrasound biomicroscopy before and after treatment with iridectomy or iridociclectomy. All specimens were sent

  5. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  6. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  7. Designing Communication Design

    DEFF Research Database (Denmark)

    Løvlie, Anders Sundnes

    2016-01-01

    Innovating in the field of new media genres requires methods for producing designs that can succeed in being disseminated and used outside of design research labs. This article uses the author's experiences with the development of university courses in communication design to address the research...... question: How can we design courses to give students the competencies they need to work as designers of new media? Based on existing approaches from UX design and other fields, I present a model that has demonstrated its usefulness in the development of commercial products and services. The model...

  8. Design Criteria for the Future of Flight Controls. Proceedings of the Flight Dynamics Laboratory Flying Qualities and Flight Control Symposium 2-5 March 1982.

    Science.gov (United States)

    1982-07-01

    launch platform . But as a transport, obviously, long duration flights must be accomplished without undue crew fatigue. Underlying all this is an...Modes a weapons platforme throah sore effective flight listed in Figure 1. control design. VII. Sugestd Frthr Research Rfrne There are certain...A KIat KiOW CC~~i at Pilot m1A~ MloU. ftm of a h m ad ftf trn* weD kqr~&~ m Wix a I -n ** Wuma of Am 1 Tbalam, ad axazw Dpi c Fwa PltwsAp ad A

  9. Temperature profiles from MBT casts from the DUANE from Ocean Weather Station B (OWS-B), C (OWS-C), D (OWS-D), E (OWS-E), H (OWS-H), J (OWS-J), and K (OWS-K) in the North Atlantic Ocean from 1955-04-07 to 1968-02-15 (NODC Accession 7500471)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathythermograph data were collected from the DUANE within a 1-mile radius of Ocean Weather Station B (5630N 05100W), C (5245N 03530W), D (4400N 04100W), E (3500N...

  10. Desenvolvimento e estudos de estabilidade preliminares de emulsões O/A contendo Cetoconazol 2,0% - DOI: 10.4025/actascihealthsci.v30i2.812 Development and Preliminary Stability Evaluations of O/W emulsion containing Ketoconazole 2.0% - DOI: 10.4025/actascihealthsci.v30i2.812

    Directory of Open Access Journals (Sweden)

    Márcio Augusto Leite de Campos

    2008-12-01

    Full Text Available O objetivo deste trabalho foi desenvolver emulsões O/A contendo Cetoconazol 2,0% e avaliar sua estabilidade preliminar por meio da análise de suas características físico-químicas, tais como homogeneidade, formação de agregados, floculação, cremeação e coalescência. As emulsões foram formuladas utilizando diferentes bases autoemulsionantes, compostas por álcool cetoestearílico, álcool etoxilado, álcool graxos superiores, ácido esteárico, lanolina e outros. As emulsões foram submetidas aos testes de centrifugação, estresse térmico e ciclo gela-degela, e suas características organolépticas e físico-químicas foram avaliadas no início e no final de cada ensaio. Todas as amostras mantiveram sua homogeneidade após o teste de centrifugação, mas somente os sistemas preparados com ceras autoemulsionáveis constituídas por álcool graxos superiores (Polawax NF® e Copolímero de Amônio Acriloil dimetiltaurato VP, Trilauril 4 fosfato, Sesquisosterato de metil glicose, Óleo de flores de verão e Tetradibutil pentaeritritil hidroxihidrocinamato de Glicerina (Hostacerin NCB® ; mantiveram sua estabilidade após testes de estresse térmico e ciclo gela-degelaThe objective of this work was the development of O/W emulsions containing Ketoconazole 2.0% and to evaluate their preliminary stability by analyzing physical-chemical characteristics such as homogeneity, aggregation formation, flocculation, creaming and coalescence. The emulsions were formulated using different self-emulsifying bases, composed of cetearyl alcohol, ethoxyl alcohol, higher fatty alcohol, stearic acid, lanolin and others. The O/W emulsions were evaluated by centrifugation test, thermal stress test, and freezing/defrosting cycles, and its organoleptic and physical-chemistry characteristics were analyzed before and after each assay. All samples maintained their homogeneity after the centrifugation test, but only the systems prepared with self emulsifying

  11. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research suggest that engineering designers need assistance to understand what information is relevant for their particular design problem. They require guidance in formulating their queries and also to understand what information is relevant for them. This paper presents an approach to pr...

  12. Study of Formulation Variables Influencing Polymeric Microparticles by Experimental Design

    Directory of Open Access Journals (Sweden)

    Jitendra B. Naik

    2014-04-01

    Full Text Available The objective of this study was to prepare diclofenac sodium loaded microparticles by single emulsion [oil-in-water (o/w] solvent evaporation method. The 22 experimental design methodology was used to evaluate the effect of two formulation variables on microspheres properties using the Design-Expert® software and evaluated for their particle size, morphology, and encapsulation efficiency and in vitro drug release. The graphical and mathematical analysis of the design showed that the independent variables were a significant effect on the encapsulation efficiency and drug release of microparticles. The low magnitudes of error and significant values of R2 prove the high prognostic ability of the design. The microspheres showed high encapsulation efficiency with an increase in the amount of polymer and decrease in the amount of PVA in the formulation. The particles were found to be spherical with smooth surface. Prolonged drug release and enhancement of encapsulation efficiency of polymeric microparticles can be successfully obtained with an application of experimental design technique.

  13. A identificação da ansiedade por meio da análise da íris: uma possibilidade La identificación de la ansiedad a través del análisis de iris: una posibilidad The identification of anxiety through the analysis of the iris: a possibility

    Directory of Open Access Journals (Sweden)

    Léia Fortes Salles

    2012-03-01

    Full Text Available A ansiedade é um comportamento relacionado com doenças psicossomáticas. Por meio da avaliação da íris é possível determinar características de personalidade e intervir precocemente para evitar que algum comportamento mal adaptativo colabore para o desenvolvimento de uma doença. Os anéis de tensão sugerem predisposição para ansiedade. O objetivo deste trabalho foi verificar a correlação dos anéis de tensão presentes na íris com o Inventário de Diagnóstico da Ansiedade Traço-Estado (IDATE. Após aprovação pelo Comitê de Ética e Pesquisa, o estudo foi realizado com 62 funcionários do Centro de Aperfeiçoamento em Ciências da Saúde da Fundação Zerbini entre maio e julho de 2010. O coeficiente de correlação de Spearman mostrou correlação positiva e significativa entre o escore do IDATE e a quantidade dos anéis de tensão, sugerindo que a presença destes sinais indicam maior predisposição para ansiedade. Com a identificação precoce deste comportamento temos chances de diminuir o desenvolvimento de doenças.La ansiedad es uno de los comportamientos asociados a las enfermedades psicosomáticas. A través de la evaluación del iris es posible determinar los rasgos de personalidad y de intervención temprana para prevenir una mala conducta y evitar desarrollar una enfermedad. Los anillos de tensión sugieren una predisposición a la ansiedad. El objetivo de este estudio fue evaluar la correlación de los anillos de estrés presentes en el iris con el Inventario Diagnóstico de Ansiedad Rasgo-Estado (IDATE. Después de la aprobación por el Colegio de Ética e Investigación, la encuesta se llevó a cabo con 62 funcionarios del Centro para el Avance de las Ciencias de la Salud Fundación Zerbini entre mayo y julio de 2010. El coeficiente de correlación de Spearman mostró una correlación positiva y significativa entre la puntuación del IDATE y la cantidad de anillos de tensión, lo que sugiere que la presencia de

  14. Winged design; Befluegeltes Design

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Tilman

    2013-10-15

    Today the wind rotor blades are about 80 meter long. To keep them light and transportable designers and material scientists come up with a number of ideas. Will the carbon fiber prevail against the glass fiber? [German] Ueber 80 Meter messen die laengsten Rotorblaetter heute. Um sie leicht und transportfaehig zu halten, lassen sich Designer und Materialforscher einiges einfallen. Wird sich die Kohlefaser gegen die Glasfaser durchsetzen?.

  15. Dansk Design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  16. VLSI design

    CERN Document Server

    Chandrasetty, Vikram Arkalgud

    2011-01-01

    This book provides insight into the practical design of VLSI circuits. It is aimed at novice VLSI designers and other enthusiasts who would like to understand VLSI design flows. Coverage includes key concepts in CMOS digital design, design of DSP and communication blocks on FPGAs, ASIC front end and physical design, and analog and mixed signal design. The approach is designed to focus on practical implementation of key elements of the VLSI design process, in order to make the topic accessible to novices. The design concepts are demonstrated using software from Mathworks, Xilinx, Mentor Graphic

  17. Noored etlejad võistlesid Jüris / Kristina Amor

    Index Scriptorium Estoniae

    Amor, Kristina

    2008-01-01

    Jüri Gümnaasiumis toimunud Eesti VIII õpilasetlejate konkursi Harjumaa voorust. Žüriisse kuulusid: Maret Oomer, Lilian Urba, Ingrid Pukk. 4.-6. klasside arvestuses sai I koha Kenneth Norden, II koha Merilin Mölder ja III koha Loora-Eliisabet Lomp. 7.-9. klasside arvestuses sai I koha Indrek Jõe, II koha Raul Kuldvee, III koha Birgit Luht. 10.-12. klasside arvestues sai I koha Ilja Massalov

  18. Risø energy report 3. Hydrogen and its competitors

    DEFF Research Database (Denmark)

    Larsen, Hans Hvidtfeldt; Sønderberg Petersen, Leif

    2004-01-01

    Interest in the hydrogen economy has grown rapidly in recent years. Those countries with long traditions of activity in hydrogen research and development have now been joined by a large number of newcomers. The main reason for this surge of interest isthat the hydrogen economy may be an answer to...... and international organisations including the European Union, the International Energy Agency and the United Nations...... to the two main challenges facing the world in the years to come: climate change and the need for security of energy supplies. Both these challenges require the development of new, highly-efficient energytechnologies that are either carbon-neutral or low emitting technologies. Alternative fuels could serve...

  19. Terror määris klantspildi verega / Kaarel Kaas

    Index Scriptorium Estoniae

    Kaas, Kaarel, 1978-

    2005-01-01

    9. novembril toimunud pommiplahvatustes Jordaania pealinna Ammani kolmes hotellis hukkus ligi 60 inimest. Siiani on Jordaania suutnud tänu tõhusale julgeolekusüsteemile terroriaktidest hoiduda. Lisa, kaart: Plahvatused Jordaanias. Vt. samas: Al-Qaeda võitleja tappis Bagdadis 35 inimest

  20. Assessment of dose measurement uncertainty using RisøScan

    DEFF Research Database (Denmark)

    Helt-Hansen, J.; Miller, A.

    2006-01-01

    The dose measurement uncertainty of the dosimeter system RisoScan, office scanner and Riso B3 dosimeters has been assessed by comparison with spectrophotometer measurements of the same dosimeters. The reproducibility and the combined uncertainty were found to be approximately 2% and 4%, respectiv......%, respectively, at one standard deviation. The subroutine in RisoScan for electron energy measurement is shown to give results that are equivalent to the measurements with a scanning spectrophotometer. (c) 2006 Elsevier Ltd. All rights reserved....

  1. RisøScan - a new dosimetry software

    DEFF Research Database (Denmark)

    Helt-Hansen, J.; Miller, A.

    2004-01-01

    RisoScan is a software package that is used for analysis of images of visibly coloured dosimeter films. The image is created by scanning the dosimeter film on a flatbed scanner. RisoScan is based on LabView(R), and it is useful for analysis of dose distributions and depth dose curves. Measurement...

  2. Dollariafääris otsustav kohus / Jaanus Piirsalu

    Index Scriptorium Estoniae

    Piirsalu, Jaanus, 1973-

    2001-01-01

    Ühispank loodab täna New Yorgis algaval kohtuprotsessil saavutada soodsa otsuse 10 milj. dollari tagasisaamiseks USA pangalt Bankers Trust Company. 1994.a. S. Kallase juhitud Eesti Palgast alguse saanud dollariskandaal

  3. Distance constant of the Risø cup anemometer

    DEFF Research Database (Denmark)

    Kristensen, L.; Frost Hansen, O.

    2002-01-01

    The theory for cup-anemometer dynamics is presented in some detail and two methods of obtaining the distance constant lo are discussed. The first method is based on wind tunnel measurements: with a constant wind speed the cup anemometer is released from alocked position of the rotor...... and the increasing rotation rate recorded. It is concluded that the rapid increase in rotation rate makes the method very inaccurate. The second method consists of an analysis of turbulent, atmospheric of wind speed asmeasured by the cup anemometer and a fast-responding sonic anemometer with a spatial eddy...... resolution which is significantly better than that which can be obtained by a cup anemometer. The ratio between the measured power spectra of the horizontal windspeed by the two instruments contains the necessary information for determining the response characteristics of the cup anemometer and thereby lo...

  4. Perekonnaportree interjööris / Aare Ermel

    Index Scriptorium Estoniae

    Ermel, Aare, 1957-2013

    2005-01-01

    Lühiseriaal Mannide kirjanikedünastia saatusest 1930-1940-ndail aastail "Mannide perekond" ("Die Manns") : stsenaristid Heinrich Breloer ja Horst Königstein : režissöör Heinrich Breloer : Saksamaa 2001

  5. OW NOAA AVHRR-GAC Sea-Surface Temperature

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains satellite-derived sea-surface temperature measurements collected by means of the Advanced Very High Resolution Radiometer - Global Area Coverage...

  6. Solving the Extended Tree Knapsack Problem with xed cost ow ...

    African Journals Online (AJOL)

    Parts of the Local Access Telecommunication Network planning problem may be modelled as an Extended Tree Knapsack Problem. The Local Access Telecommunication Network can contribute up to 60% of the total network costs. This paper presents partitioning algorithms that use standard o-the-shelf software coupled ...

  7. OW NOAA GOES-POES Sea Surface Temperature

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains blended satellite-derived sea-surface temperature measurements collected by means of the Geostationary Orbiting Environmental Satellites (GOES)...

  8. OW AVISO Sea-Surface Height & Niiler Climatology

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains satellite-derived sea-surface height measurements collected by means of the TOPEX/Poseidon/ERS, JASON-1/Envisat, and Jason-2/Envisat satellite...

  9. Supplementary data: Wheat k erneldimensions: h ow do they ...

    Indian Academy of Sciences (India)

    do they contribute to kernelweight at an. individualQ. TL level? Fa. Cui,. Anming. Ding,. Jun. L i,. Chunhua. Zhao,. X ingfeng. L i,. Deshun. Feng,. Xiuqin. W ang,. Lin. W ang,. Jurong. Gao and. Honggang. W ang. J. Genet. 90. ,. 409–425. Ta b le. 1 . Unconditional. Q. TL with significant additive effects for thousand-kernel.

  10. EPA Office of Water (OW): Water Infrastructure Needs

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data layer mashup using Census data: U.S. States (Generalized) represents the 50 states and the District of Columbia of the United State. This shapefile was enhanced...

  11. EPA Office of Water (OW): Pollutant Discharge Permit Status

    Data.gov (United States)

    U.S. Environmental Protection Agency — U.S. States (Generalized) represents the 50 states and the District of Columbia of the United States joined with data from the NPDES Permit Backlog Report for the...

  12. EPA Office of Water (OW): Water Quality Assessment Information

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data layer mashup in a kmz format using Census data: U.S. States (Generalized) represents the 50 states and the District of Columbia of the United State. This...

  13. EPA Office of Water (OW): Beaches NHDPlus Indexed Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Beaches Environmental Assessment and Coastal Health (BEACH) Program focuses on the following five areas to meet the goals of improving public health and...

  14. Traditional Islamic cities unveiled: the quest for urban design regularity

    Directory of Open Access Journals (Sweden)

    Jorge Correia

    2015-08-01

    Full Text Available Traditional Islamic cities have generally gathered orientalized gazes and perspectives, picking up from misconceptions and stereotypes that during the second half af the 19th century andwere perpectuated by colonialism. More recent scholarship has shed light on the urban organizationand composition of such tissues; most of them confined to old quarters or historical centres ofthriving contemporary cities within the Arab-Muslim world. In fact, one of the most striking featureshas been the unveiling of layered urban assemblages where exterior agents have somehowlaunched or interrupted an apparent islamicized continuum. Primarly, this paper wishes to search forexternal political factors that have designed regularly geometrized patterns in medium-sized Arabtowns. For that, two case studies from different geographies - Maghreb and the Near East - will bemorphologically analysed through updated urban surveys. Whereas Nablus (Palestine ows the urbanmatrix of its old town to its Roman past, in Azemmour’s medina (Morocco it is still possible to trackthe thin European early-modern colonial stratum. However, both cases show how regularity patternschallenge Western concepts of geometrical design to embrace levels of rationality related to tradionalIslamic urban forms, societal configurations and built environment. Urban morphology becomes afundamental tool for articulating the history with me processes of sedimentation and evolution in orderto read current urban prints and dynamics. Thus, the paper will also interpret alternative logics ofrational urban display in Azemmour and Nablus, linked to ways of living within the Islamic sphere.

  15. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Kjærsgaard, Mette Gislev

    2015-01-01

    This focus section explores the opportunities of design anthropology in participatory design as an approach to research and design in an increasingly global and digital world. Traditionally, ethnography has been used in Participatory design to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to addressing societal challenges and change, and a way for anthropologists and designers to engage in participatory research and design that extend beyond the empirical....

  16. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Gislev Kjærsgaard, Mette

    2014-01-01

    In this workshop we explore the opportunities of ethnography and design anthropology in Participatory Design (PD) as an approach to design in an increasingly global and digital world. Traditionally, ethnography has been used in PD to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to societal challenges, and a way for anthropologists and designers to engage in design that extends beyond the empirical....

  17. Evidensbaseret design

    DEFF Research Database (Denmark)

    Pagh, Jesper

    2013-01-01

    Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens.......Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens....

  18. Temperature profiles from MBT casts from the BIBB from Ocean Weather Station B (OWS-B), C (OWS-C), D (OWS-D), E (OWS-E), H (OWS-H), and J (OWS-J) in the North Atlantic Ocean from 1955-03-26 to 1966-10-13 (NODC Accession 7600309)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathythermograph data were collected from the YAKUTAT within a 1-mile radius of Ocean Weather Station B (5630N 05100W), C (5245N 03530W), D (4400N 04100W), E (3500N...

  19. FPGA design

    CERN Document Server

    Simpson, Philip

    2010-01-01

    This book describes best practices for successful FPGA design. It is the result of the author's meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book's content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design t

  20. Design Games

    DEFF Research Database (Denmark)

    Johansson, Martin Wetterstrand

    2007-01-01

    In this paper design games are discussed as an approach to managing design sessions. The focus is on the collaborative design session and more particular on how to set up the collaboration and reinsure progress. Design games have the advantage of framing the collaborative assignment at hand....... Experiments can be set up to explore possible futures and design games has the qualities of elegantly focus the work at the same time as it lessens the burden for the process facilitator. The present paper goes into detail about how design games can be set up to facilitate collaboration and how the design...

  1. Design What?%

    DEFF Research Database (Denmark)

    Engholm, Ida

    2017-01-01

    processes, which require specific development methods across a wide range of disciplines, from industrial design over graphic communication to service and digital design and strategic corporate development. The book addresses both established methods and recent research in design processes at leading design...... idea to the end-result. The goal for this graphic non-fiction project is to document and present both historical and current developments in design methodology, from the early attempts at documenting procedures for design process management at the Bauhaus School in the 1920s to contemporary design...

  2. VLSI design

    CERN Document Server

    Basu, D K

    2014-01-01

    Very Large Scale Integrated Circuits (VLSI) design has moved from costly curiosity to an everyday necessity, especially with the proliferated applications of embedded computing devices in communications, entertainment and household gadgets. As a result, more and more knowledge on various aspects of VLSI design technologies is becoming a necessity for the engineering/technology students of various disciplines. With this goal in mind the course material of this book has been designed to cover the various fundamental aspects of VLSI design, like Categorization and comparison between various technologies used for VLSI design Basic fabrication processes involved in VLSI design Design of MOS, CMOS and Bi CMOS circuits used in VLSI Structured design of VLSI Introduction to VHDL for VLSI design Automated design for placement and routing of VLSI systems VLSI testing and testability The various topics of the book have been discussed lucidly with analysis, when required, examples, figures and adequate analytical and the...

  3. Design Accountability

    DEFF Research Database (Denmark)

    Koskinen, Ilpo; Krogh, Peter

    2015-01-01

    When design research builds on design practice, it may contribute to both theory and practice of design in ways richer than research that treats design as a topic. Such research, however, faces several tensions that it has to negotiate successfully in order not to lose its character as research....... This paper looks at constructive design research which takes the entanglement of theory and practice as its hallmark, and uses it as a test case in exploring how design researchers can work with theory, methodology, and practice without losing their identity as design researchers. The crux of practice based...... design research is that where classical research is interested in singling out a particular aspect and exploring it in depth, design practice is characterized by balancing numerous concerns in a heterogenous and occasionally paradoxical product. It is on this basis the notion of design accountability...

  4. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  5. Konceptuelt design og udvikling af Intergomus

    DEFF Research Database (Denmark)

    Ellebæk, P.; Pedersen, T.; Stendal, Karsten

    1999-01-01

    Denne rapport gennemgår udviklingsforløbet af et træningsapparat til genoptræning af læderede fingre. Rapporten omhandler kun den mekaniske del af udstyret. Opgaven er blevet løst i samarbejde med Ergoterapien på Køge Amtssygehus, Procare, Centret forAvanceret Teknologi og flere afdelinger på RIS...

  6. Memory design

    DEFF Research Database (Denmark)

    Tanderup, Sisse

    by cultural forms, often specifically by the concept of memory in philosophy, sociology and psychology, while Danish design traditionally has been focusing on form and function with frequent references to the forms of nature. Alessi's motivation for investigating the concept of memory is that it adds......Mind and Matter - Nordik 2009 Conference for Art Historians Design Matters Contributed Memory design BACKGROUND My research concerns the use of memory categories in the designs by the companies Alessi and Georg Jensen. When Alessi's designers create their products, they are usually inspired...... a cultural dimension to the design objects, enabling the objects to make an identity-forming impact. Whether or not the concept of memory plays a significant role in Danish design has not yet been elucidated fully. TERMINOLOGY The concept of "memory design" refers to the idea that design carries...

  7. Business design or Creative design

    DEFF Research Database (Denmark)

    Sørensen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller

    2008-01-01

    Business design is about turning good ideas into future business, but it requires a great entrepreneurial opportunity to be exploited via a valid strategic and organizational design. The literature says much about how entrepreneurs design strategies and organizations, but how do they design...

  8. An evaluation of a diagnostic test to identify the sex of farmed rainbow trout, using sex-specific molecular markers Evaluación de un test diagnóstico para identificar el sexo en truchas arcoíris por medio de marcadores moleculares específicos

    Directory of Open Access Journals (Sweden)

    María E López

    2012-11-01

    Full Text Available In trout farming males exhibits lower growth rate and precocious sexual maturation in contrast to females. Since these traits are detrimental for intensive production, all females populations are most appreciated by fish farmers. Molecular markers sex-specific have been developed for rainbow trout that can be useful to diagnose the phenotypic sex of individuals. We evaluated the use of two SCAR markers (OmyP9 & Omy163, which show polymorphisms between males and females in rainbow trout as a diagnostic test for sexing farmed trout. Adult trout (n = 131 were genotyped to assess the association of the SCAR markers with phenotypic sex. To evaluate the correct performance of the SCAR marker in sex diagnosis, each marker and both were analyzed to estimate its specificity (the proportion of males that are correctly identified, sensitivity (the proportion of females that are correctly identified and predictive value (the probability of the correct positive or negative female identification. Significant associations with phenotypic sex of both SCAR markers with sex were found. The sensitivity and predictive (positive and negative indexes show higher values when both SCAR markers were considered (95.7, 77.4 and 94.4%, respectively. For joined SCAR markers a likelihood ratio (LR+ of 3.43 was obtained indicating its utility to establish a diagnostic test for sexing trout by use of marker-based analysis.En el cultivo de truchas los individuos del sexo masculino presentan menor tasa de crecimiento y maduración sexual precoz, características que no presentan las hembras. Debido a estos rasgos indeseables para el cultivo intensivo, el uso de poblaciones todo hembra es una práctica habitual en el cultivo de truchas. Para trucha arcoíris se han desarrollado marcadores moleculares sexo específico que pueden utilizarse en el diagnóstico temprano del sexo, en condiciones de cultivo. Se evaluó la aplicación de dos marcadores SCAR (OmyP9 y Omy163, que muestran

  9. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  10. Influence of the formulation type (o/w, w/o/w emulsions and ointment on the topical delivery of paromomycin Influência da forma farmacêutica (emulsão múltipla A/O/A, emulsão O/A e pomada sobre a permeação e retenção cutânea da paromomicina

    Directory of Open Access Journals (Sweden)

    Sérgio Fernandes de Oliveira Gomes

    2004-09-01

    Full Text Available Ointments containing paromomycin (PA have been used for topical treatment of cutaneous leishmaniasis. Although influence of the vehicle on skin permeation is crucial for optimization of formulations containing PA, this aspect has not been investigated experimentally. In this study, we have evaluated the influence of the formulation type [oil-in-water (o/w, water-in-oil-in-water (w/o/w emulsions and ointment] on in vitro release and skin permeation of PA and experiments were carried out on cellulose acetate membrane and skin biopsies from hairless mice, respectively. PA release from o/w emulsion (51.7% ± 0.9 of dose applied was faster than that observed for w/o/w emulsion (3.0% ± 0.5. PA absorption from o/w emulsion (87.1% ± 3.9 through stripped skin was 5 to 6 times higher than that observed for w/o/w multiple emulsion (14.7% ± 0.5 and ointment (16.6% ± 0.1. PA permeation through intact (normal skin was negligible for all tested formulations. Skin uptake from o/w emulsion (0.9% ± 0.1 was greater than that observed for w/o/w multiple emulsion (0.3% ± 0.1 and ointment (0.1% ± 0.1. These results suggest that a hydrophilic vehicle (o/w emulsion could be an interesting alternative to improve topical delivery of PA.Pomadas contendo paromomicina (PA são utilizadas no tratamento tópico da leishmaniose cutânea. Embora a influência do veículo seja crucial para otimização de formulações contendo PA, este aspecto não tem sido investigado experimentalmente. Neste estudo, nós avaliamos a influência do tipo de formulação [emulsões óleo-em-água (o/a, múltipla água-em-óleo-em-água (a/o/a e pomadas] sobre a liberação e permeação cutânea in vitro da PA e os experimentos foram conduzidos sobre membranas de acetato de celulose e biópsias de pele de camundongos glabros, respectivamente. A liberação de PA a partir da emulsão o/a (51,7% da dose aplicada foi mais rápida do que aquela observada a partir da emulsão múltipla a

  11. Design Anthropology

    DEFF Research Database (Denmark)

    Gunn, Wendy

    Design anthropology is a call for a different way of involving anthropology and participatory observation within practices of designing technologies, services, policies and infrastructure that does not aim towards changing human behavior. Here design is considered the process and not the object...... of inquiry. The paper presents a short history of design anthropology, its theoretical underpinnings and methodologies. Theoretically, the emerging field is influenced by processual, critical and action orientated approaches in anthropology. I argue that by combining anthropological methodology and knowledge...... with the future orientated imaginative praxis of design skill and collaborative design processes, anthropology and design could learn from each other. I conclude by referring to what theories, methods, and approaches are in use by practitioners of design anthropology....

  12. Danish design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    2001-01-01

    Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne......Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne...

  13. Designing motivation

    DEFF Research Database (Denmark)

    How can products be designed to change our habits for the better? What is some of the leading research that designers can draw on to create new systems that motivate people towards healthier behaviour? Designing Motivation is an edited collection of ‘industrialist cheat sheets’: 22 single......-page summaries of research articles relating to technology design, motivation, and behaviour change. Ranging across the fields of economics, sociology, design research and behavioural science, each summary draws out the design implications of the research. It is intended as a resource for designers who...... are grappling with how to create motivating products, and as a primer for students who want a brief introduction to some of the relevant theories, findings and design interventions in these fields. The editor's introduction raises a number of issues encountered when we try to apply behavioural research...

  14. Research Design

    DEFF Research Database (Denmark)

    2019-01-01

    Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... Scott Reinbacher: Multidisciplinary Research Designs in Problem Based Research. The case of an european project on chronical diseases, the Tandem project (Training Alternmative Networking Skills in Diabetes Management). 15p Niels Nørgaard Kristensen: A qualitative bottom up approach to post modern...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...

  15. Repository design

    Energy Technology Data Exchange (ETDEWEB)

    John, C M

    1982-01-01

    Various technical issues of radioactive waste design are addressed in this paper. Two approaches to repository design considered herein are: (1) design to minimize the disturbance of the hot rock; and (2) designs that intentionally modify the hot rock to insure better containment of the wastes. The latter designs range from construction of a highly impermeable barrier around a spherical cavern to creating a matrix of tunnels and boreholes to form a cage within which the hydraulic pressure is nearly constant. Examples of these design alternatives are described in some detail. It is concluded that proposed designs for repositories illustrate that performance criteria considered acceptable for such facilities can be met by appropriate site selection and repository engineering. With these technically feasible design concepts, it is also felt that socioeconomic and institutional issues can be better resolved. (BLM)

  16. Breakwater design

    OpenAIRE

    Verhagen, H.J.; van den Bos, J.P.

    2017-01-01

    For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic approach starts at the functional description of breakwaters, system analysis including side-effects and derivation of boundary conditions and continues to the actual design, first of the main armour ...

  17. Design typology and design organisation

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Wognum, N.; McAloone, Timothy Charles

    2002-01-01

    research society has recognised normative procedural models of designing as being a reasonable answer to the question: How do designing proceed? The reasoning behind the models, from which the design methodology model by [Pahl & Beitz 1995], may be seen as a characteristic one, was a mix of human problem......The idea of focusing upon the creation of a design typology was articulated by [Andreasen & Wognum 2000] and detailed by [Andreasen & Wognum 2001]. The aim was to propose a typology, which could serve as identification of design types and design research contributions. For a long period the design...... solving-, design management-, and artefact nature-reasoning. Critique has been raised to that type of models as being neither explanatory nor instructive. If we accept these models as merely being pragmatically "stepping-stone" explanations of what happens during designing, it is interesting to observe...

  18. Design Processes

    DEFF Research Database (Denmark)

    Ovesen, Nis

    2009-01-01

    Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...... and emerging production methods....

  19. Radiopharmacy design

    International Nuclear Information System (INIS)

    Lazarus, C.R.

    1985-01-01

    The factors which should be considered when designing a radiopharmacy are examined. These include the levels and types of radioactivity and the functions, location, size and layout of the radiopharmacy. Aspects of the design process including environmental cleanliness in enclosed spaces and microbiological safety cabinets are also discussed. Finally the current publications available on recommendations and guidelines for radiopharmacy designs are briefly reviewed. (UK)

  20. Breakwater design

    NARCIS (Netherlands)

    Verhagen, H.J.; van den Bos, J.P.

    For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic

  1. Design Aspects

    International Nuclear Information System (INIS)

    Hillary, J.J.

    1974-01-01

    Summarizing part of a seminar on iodide filter testing the author classifies the design information on iodine filters which was presented at the meeting in terms of design requirements - species to be trapped sorption materials and engineering factors -, design evaluation, applications and operational experience

  2. Design of MgB2 superconducting dipole magnet for particle beam transport in accelerators

    OpenAIRE

    Abrahamsen, A.B.; Zangenberg, N.; Baurichter, A.; Grivel, Jean-Claude; Andersen, Niels Hessel

    2006-01-01

    A comprehensive analysis of the innovation potential of superconductivity at Risø was performed in February 2004 by the main author of this report [1]. Several suggestions for new products and new markets were formulated by the superconductivity group andexamined by the innovation staff at Risø. The existing markets of superconducting technology is within highly specialized scientific areas such as magnetic confinement in fusion energy, sample environment in neutron scattering and large scale...

  3. Design for low-power and reliable flexible electronics

    Science.gov (United States)

    Huang, Tsung-Ching (Jim)

    Flexible electronics are emerging as an alternative to conventional Si electronics for large-area low-cost applications such as e-paper, smart sensors, and disposable RFID tags. By utilizing inexpensive manufacturing methods such as ink-jet printing and roll-to-roll imprinting, flexible electronics can be made on low-cost plastics just like printing a newspaper. However, the key elements of exible electronics, thin-film transistors (TFTs), have slower operating speeds and less reliability than their Si electronics counterparts. Furthermore, depending on the material property, TFTs are usually mono-type -- either p- or n-type -- devices. Making air-stable complementary TFT circuits is very challenging and not applicable to most TFT technologies. Existing design methodologies for Si electronics, therefore, cannot be directly applied to exible electronics. Other inhibiting factors such as high supply voltage, large process variation, and lack of trustworthy device modeling also make designing larger-scale and robust TFT circuits a significant challenge. The major goal of this dissertation is to provide a viable solution for robust circuit design in exible electronics. I will first introduce a reliability simulation framework that can predict the degraded TFT circuits' performance under bias-stress. This framework has been validated using the amorphous-silicon (a-Si) TFT scan driver for TFT-LCD displays. To reuse the existing CMOS design ow for exible electronics, I propose a Pseudo-CMOS cell library that can make TFT circuits operable under low supply voltage and which has post-fabrication tunability for reliability and performance enhancement. This cell library has been validated using 2V self-assembly-monolayer (SAM) organic TFTs with a low-cost shadow-mask deposition process. I will also demonstrate a 3-bit 1.25KS/s Flash ADC in a-Si TFTs, which is based on the proposed Pseudo-CMOS cell library, and explore more possibilities in display, energy, and sensing

  4. Design Research

    DEFF Research Database (Denmark)

    Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

  5. Design spaces

    DEFF Research Database (Denmark)

    2005-01-01

    Digital technologies and media are becoming increasingly embodied and entangled in the spaces and places at work and at home. However, our material environment is more than a geometric abstractions of space: it contains familiar places, social arenas for human action. For designers, the integration...... of digital technology with space poses new challenges that call for new approaches. Creative alternatives to traditional systems methodologies are called for when designers use digital media to create new possibilities for action in space. Design Spaces explores how design and media art can provide creative...... alternatives for integrating digital technology with space. Connecting practical design work with conceptual development and theorizing, art with technology, and usesr-centered methods with social sciences, Design Spaces provides a useful research paradigm for designing ubiquitous computing. This book...

  6. Design Research as Conceptual Designing

    DEFF Research Database (Denmark)

    Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail

    2015-01-01

    define conceptual designing as a constructive framing and re-framing activity, which is mediated by and targeted at the creation of new design concepts. Conceptual designing as an approach is valuable for addressing the fuzziness and ambiguity typical of research that explores novel areas with new...... partners, methods and resources. It is by no means a new phenomenon, and the main contribution of the article is the clarification of conceptual designing as a particular approach to designing and researching. The approach embraces openness, resource-construction and collaboration. We conclude...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...

  7. Comparison of various spring analogy related mesh deformation techniques in two-dimensional airfoil design optimization

    Science.gov (United States)

    Yang, Y.; Özgen, S.

    2017-06-01

    During the last few decades, CFD (Computational Fluid Dynamics) has developed greatly and has become a more reliable tool for the conceptual phase of aircraft design. This tool is generally combined with an optimization algorithm. In the optimization phase, the need for regenerating the computational mesh might become cumbersome, especially when the number of design parameters is high. For this reason, several mesh generation and deformation techniques have been developed in the past decades. One of the most widely used techniques is the Spring Analogy. There are numerous spring analogy related techniques reported in the literature: linear spring analogy, torsional spring analogy, semitorsional spring analogy, and ball vertex spring analogy. This paper gives the explanation of linear spring analogy method and angle inclusion in the spring analogy method. In the latter case, two di¨erent solution methods are proposed. The best feasible method will later be used for two-dimensional (2D) Airfoil Design Optimization with objective function being to minimize sectional drag for a required lift coe©cient at di¨erent speeds. Design variables used in the optimization include camber and thickness distribution of the airfoil. SU2 CFD is chosen as the §ow solver during the optimization procedure. The optimization is done by using Phoenix ModelCenter Optimization Tool.

  8. ECO DESIGN IN DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2014-05-01

    Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

  9. Design Education

    DEFF Research Database (Denmark)

    Brandt, Eva

    2007-01-01

    In resent years the two main design schools in Denmark (Danmarks Designskole and Designskolen Kolding ) undergo many changes. The overall goal for both is to obtain status as a university, and they will be evaluated in this regard in 2010. Transforming a vocational school with long handicraft...... traditions into a research based institution for higher education is demanding. Danmarks Designskole is in the middle of this process, many activities are initiated, both employees and students are involved, and from outside representatives from various design professions. The design process has many...... stakeholders with various interests and opinions. The aim it is not to design a computer system, a service or product but re-designing curriculum, work procedures, self images etc. which support educating designers of the future. This paper reports on two investigations that have been carried through as part...

  10. Cooperative design

    DEFF Research Database (Denmark)

    Schmidt, Kjeld

    1998-01-01

    In the contemporary world, engineers and designers face huge challenges as they shift towards novel organizational concepts such as ‘concurrent engineering’ in order to manage increasing product diversity so as to satisfy customer demands while trying to accelerate the design process to deal...... they are facing. On one hand, designers need highly flexible ‘coordination mecha-nisms’ that can support horizontal coordination of large-scale distributed design projects, and on the other hand design organizations require versatile and ubiquitous infrastructures to be able to manage their ‘common informa...... with the competitive realities of a global market and decreasing product life cycles. In this environment, the coordination and integration of the myriads of interdependent and yet distributed and concurrent design activities becomes enormously complex. It thus seems as if CSCW technologies may be indispensable...

  11. Workspace Design

    DEFF Research Database (Denmark)

    Seim, Rikke

    Arbejdsmiljø adresseres sjældent i den klassike tekniske tilgang til arbejdspladsdesign. Workspace Design konceptet er et alternativ tilgang til design eller re-design af arbejdspladser, baseret på en socio-teknisk systemforståelse, hvor hovedprincipperne er 1) transformation af...... arbejdsmiljørådgiveren til facilitator af arbejdspladsdesignprocessen og 2) transformation af medarbejderne til co-designere af deres egen arbejdsplads. Dette ph.d.-projekt er en del af Workspace Design forskningsprogrammet som har udviklet og testet Workspace Design konceptet og de tilhørende metoder ved intervention i...... arbejdspladsdesignprocesser i tre virksomheder tilhørende henholdsvis industri-, service- og sundhedssektoren. Ph.d.-projektet har belyst hvordan en medarbejderinvolverende designproces kan iscenesættes og faciliteres af arbejdsmiljøprofessionelle ved hjælp af kreative, visuelle metoder inspireret af Participatory Design...

  12. Design culture and design education

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Bang, Anne Louise

    2014-01-01

    to change the education of future designers. This is an emerging field at a number of design schools across the world, among these Design School Kolding in Denmark. In this paper we understand and discuss design education as part of a cultural phenomenon. The aim of our research is to develop new dialogue...... tools for teaching fashion and textile students in order to stimulate new ways of thinking and engaging with users. By employing participatory design methods in the field of fashion and textiles, we seek to develop an alternative transformational strategy that may further the design of products....... In this paper we discuss ways in which design education might contribute in changing the current professional culture in order to meet the need for more sustainable futures....

  13. Integrated Design

    DEFF Research Database (Denmark)

    Jørgensen, Michael; Nielsen, M. W.; Strømann-Andersen, Jakob Bjørn

    2011-01-01

    and describe the decision process. Specific attention is given to how the engineering input was presented and how it was able to facilitate the design development. Site and context, building shape, organization of functions and HVAC-systems were all included to obtain a complete picture of the building......, low-energy consumption, and high-quality indoor environment. We use this case study to investigate how technical knowledge about building performance can be integrated into the conceptual design stage. We have selected certain points during the design process that represented design challenges...

  14. Design Diversity

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2014-01-01

    . The exhibition is oriented along disciplines such as inclusive design, which calls for products to be designed in such a way that they are equally attractive to people of all ages. Despite the existence of innovative design concepts, the number of well-designed products available on the market is low. While many...... courageous projects for "best agers" and "golden agers" never get beyond the prototype stage, products that paint a more "beige" picture of everyday life can be found in large numbers. This fact raises some key questions: Does the existing product culture reflect today's views on old age? Do contemporary...

  15. Team designing

    DEFF Research Database (Denmark)

    Denise J. Stokholm, Marianne

    2012-01-01

    Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and gi...... thinking and communication in design. Trying to answer the question: How can visual system models facilitate learning in design thinking and team designing?......Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and give...... in relation to a design-engineering education at Aalborg University. It will exemplify how the model has been used in workshops on team designing, challenged design learning and affected design competence. In specific it will investigate the influence of visual models of the perception of design, design...

  16. Design Compass

    DEFF Research Database (Denmark)

    Stokholm, Marianne Denise J.

    2006-01-01

    Design is moreover recognised as an important strategic tool in achieving competitive business´, products and services in a global market. As design becomes a more complex matter, due to a general increase in knowledge, requirements and internationalisation, more professions are involved....... As such it acts a managing tool for both leaders and participants in the design process. This paper builds on long term practical experiment with development and use of a simple tool to support management of complex design matters in diverse groups. Concerning education it has supported the development of new...

  17. Designated Places

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  18. Design theory

    CERN Document Server

    2009-01-01

    This book deals with the basic subjects of design theory. It begins with balanced incomplete block designs, various constructions of which are described in ample detail. In particular, finite projective and affine planes, difference sets and Hadamard matrices, as tools to construct balanced incomplete block designs, are included. Orthogonal latin squares are also treated in detail. Zhu's simpler proof of the falsity of Euler's conjecture is included. The construction of some classes of balanced incomplete block designs, such as Steiner triple systems and Kirkman triple systems, are also given.

  19. Cryostat Design

    Energy Technology Data Exchange (ETDEWEB)

    Parma, V [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    This paper aims to give non-expert engineers and scientists working in the domain of accelerators a general introduction to the main disciplines and technologies involved in the design and construction of accelerator cryostats. Far from being an exhaustive coverage of these topics, an attempt is made to provide simple design and calculation rules for a preliminary design of cryostats. Recurrent reference is made to the Large Hadron Collider magnet cryostats, as most of the material presented is taken from their design and construction at CERN.

  20. Design and simulation of a control system for a run-off-river power plant; Entwurf und Simulation einer Staustufenregelung

    Energy Technology Data Exchange (ETDEWEB)

    Ott, C.

    2000-07-01

    In run-off-river plants with low discharge and under head-control, changes of inflow lead to amplified changes of outflow. In this thesis a frequency-domain-based design-procedure is introduced, which allows to add an inflow-dependent signal to the head-controller of conventional combined head- and flow-controllers. This efficiently minimizes the discharge amplification. The non-linearity of the channel-reach is taken into consideration by adapting the settings of the controller to the actual discharge. The development of a time-domain-based program system, taking into account all nonlinearities of a run-off-river-plant, is described. Using different test-functions, the capability of the improved combined head- and flow-control can be demonstrated. In both the time- and the frequency-domain it is shown, that the quality of control is not influenced to a significant extent by the inevitable inaccuracies in the description of the channel-reach and in the measurement of the actual inflow and outflow. (orig.) [German] Die Arbeit bietet eine Loesung fuer das Problem, dass im Niedrigwasserbereich wasserstandsgeregelter Staustufen Zuflussaenderungen durch die Staustufe verstaerkt an den Unterlieger weitergegeben werden. Als Problemloesung wird ein frequenzbereichsgestuetztes Entwurfsverfahren vorgestellt, mit dem die gebraeuchliche OW-Q-Regelung um eine zuflussabhaengige Aufschaltung auf den Pegelregler erweitert werden kann. Zusammen mit der Aufschaltung des Zuflusses auf den Abflussregler wird damit die Durchflussverstaerkung deutlich reduziert. Die Nichtlinearitaet der Regelstrecke 'Stauraum' wird durch eine Parameteradaption an den Staustufendurchfluss beruecksichtigt. Weiterhin wird die Entwicklung eines Programmsystems zur nichtlinearen Simulation einer Staustufenkette im Zeitbereich beschrieben. Damit kann anhand verschiedener Lastfaelle die Leistungsfaehigkeit der verbesserten OW-Q-Regelung nachgewiesen werden. Es wird im Zeit- und Frequenzbereich

  1. Interior Design.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This document contains teacher's materials for an eight-unit secondary education vocational home economics course on interior design. The units cover period styles of interiors, furniture and accessories, surface treatments and lighting, appliances and equipment, design and space planning in home and business settings, occupant needs, acquisition…

  2. Opportunity Design

    DEFF Research Database (Denmark)

    Løwe Nielsen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller

    2013-01-01

    design”. The framework explains how opportunities intentionally and pro-actively can be designed from methods and processes of moving-in and moving-out. An illustrative case of opportunity design within the area of sustainable energy and electric cars is presented to link the theoretical discussion...

  3. Publication Design.

    Science.gov (United States)

    Nelson, Roy Paul

    This book is designed to solve the problem of coordinating art and typography with content in publications. Through text and illustrations, this book suggests ways to make pages and spreads in magazines, newspapers, and books attractive and readable. As a book of techniques, it is directed at potential and practicing art directors, designers, and…

  4. Designing friends

    NARCIS (Netherlands)

    Heylen, Dirk K.J.; Nijholt, Antinus; Stronks, B.; van der Vet, P.E.; Rosenberg, D.

    2003-01-01

    Embodied Conversational Agents are virtual humans that can interact with humans using verbal and non-verbal forms of communication. In most cases, they have been designed for short interactions. This paper asks the question how one would start to design synthetic characters that can become your

  5. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  6. Integrated Design

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    1999-01-01

    A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)......A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)...

  7. Persuasive Design

    DEFF Research Database (Denmark)

    Gram-Hansen, Sandra Burri

    2013-01-01

    of the specific context. This paper argues that the claim of persuasive design may not be the ability to change the user’s attitude or behaviour towards a given subject, but rather on the ability to create designs, which adapt the context in a way, which facilitates the ability to act within the opportune moment....

  8. Japansk design

    DEFF Research Database (Denmark)

    Kural, René

    2005-01-01

    Artiklen udspringer af interviews med ti af Japans bedste møbeldesignere, grafikere, arkitekter og designfirmaer. Efter samtalerne var der tre træk ved japansk design, som trådte frem: god økonomi, fantasi og vovemod. Det bedste japanske design fusionerer vovemod med den unikke japanske kultur med...

  9. Intelligent Design

    DEFF Research Database (Denmark)

    Hjorth, Poul G.

    2005-01-01

    Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig.......Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig....

  10. Performance Design

    DEFF Research Database (Denmark)

    Svabo, Connie

    Contribution to conference: Art and Presence The emerging field of Performance Design is unfolded as a bastard form of research/art/design/practice, with shapeshifting, monstruous, hybrid and transformational qualities. The potential for presencing, which emerges out of momentarily transgressing...

  11. Design law

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen; Riis, Thomas

    2017-01-01

    This book chapter describes, analyses and discusses the development of and the challenges to the legal protection og designs in Scandinavia and the EU......This book chapter describes, analyses and discusses the development of and the challenges to the legal protection og designs in Scandinavia and the EU...

  12. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  13. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix; Wind, Simon

    2016-01-01

    In this paper, we identify the nexus between design (architecture, urban design, service design, etc.) and mobilities as a new and emerging research field. In this paper, we apply a “situational mobilities” perspective and take point of departure in the pragmatist question: “What design decisions...... and interventions affords this particular mobile situation?” The paper presents the contours of an emerging research agenda within mobilities research. The advent of “mobilities design” as an emerging research field points towards a critical interest in the material as well as practical consequences of contemporary......-making. The paper proposes that increased understanding of the material affordances facilitated through design provides important insight to planning and policymaking that at times might be in risk of becoming too detached from the everyday life of the mobile subject within contemporary mobilities landscapes....

  14. ARE INCLUSIVE DESIGNERS DESIGNING INCLUSIVELY?

    DEFF Research Database (Denmark)

    Herriott, Richard

    2013-01-01

    of activity conforming to an authoritative design method. Analysis of the result showed that of the 66 cases, 4.5% reported carrying out all six categories of activity. 39.3% carried out or reported just one step. The study also found that the predominant focus of reported design activity is in the initial...

  15. Designing Users/Designing Innovation

    DEFF Research Database (Denmark)

    The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law...... and competencies. Characteristic of these projects are the interplay between the social and the technical dimensions in the process of product development, and the students are expected to apply socio-technical methodologies in their strategies. The students’ need to inform the design through iteratively...... themes ranging from user-oriented design to product redesign and workspace design, etc. It is expected that some of the insights gained from these projects may be related outside of the immediate context of the classroom, to inform the notion of competencies in engineering design and sociotechnical...

  16. Investigating the impact of non-linear geometrical effects on wind turbine blades—Part 1: Current status of design and test methods and future challenges in design optimization

    DEFF Research Database (Denmark)

    Jensen, Find Mølholt; Puri, Amit S.; Dear, John P.

    2011-01-01

    This article is the first part of a three-article series and it deals with full-scale tests of a load-carrying box girder. The two other articles present more details on smaller sub-component levels as well as cap specimens (article 2) and shear webs (article 3). This article also links to the two...... may also have a significant impact on present wind turbine blades. In this article, a 34 m long load-carrying box girder has been tested in static flap-wise bending, and it has been demonstrated that, for this design, the Brazier effect is a critical phenomenon of great relevance for the ultimate...... failure strength. The box girder has been evaluated with and without a cap (wire) reinforcement. The cap reinforcement is one out of seven inventions Risø DTU published in 2008, which are all intended to result in a lighter and more reliable blade design. Copyright © 2010 John Wiley & Sons, Ltd....

  17. Design Anthropology

    DEFF Research Database (Denmark)

    This edited volume provides an introduction to the emerging field of design anthropology from the point of view of anthropologists engaging in its development. Contributors include young anthropologists with experience in the field and leading theoreticians, who combine to articulate the specific...... style of knowing involved in doing design anthropology. So far design anthropology has been developed mostly in the practice of industry and the public sector, in particular in Scandinavia and the US, and the sustained academic reflection to support this practice is still in its early stages. This book...... will contribute to this theoretical reflection and provide a reference for practitioners, teachers and students of anthropology, as well as design and innovation....

  18. Designing Organizations

    DEFF Research Database (Denmark)

    Book Description The design of organizations has been an ongoing concern of management theory and practice over the past several decades. Over this time, there has been little change in the fundamental theory, principles and concepts of Organization Design (OD). Recently organizational life has...... changed dramatically with the advent of: new communication systems, adaptive mechanisms, information technology, knowledge management systems, innovation processes and more. This book systemically examines these developments and their impact on OD with contributions from leading scholars in the area...... is a benchmark publication in the field of organization design. By focusing on recent developments in organization design, this book will help to create more thoughtful research and stronger empirical analyses in this important area of management and organization....

  19. Designing Organizations

    DEFF Research Database (Denmark)

    changed dramatically with the advent of: new communication systems, adaptive mechanisms, information technology, knowledge management systems, innovation processes and more. This book systemically examines these developments and their impact on OD with contributions from leading scholars in the area....... The individual chapters are organized into five sections: (1) Putting Contingency Theory in its Place, (2) Focus on Individuals who make up the Organization, (3) Innovation Processes and Organization Design, (4) Adaptation and Technology, and (5) Design for Performance. Each chapter examines aspects of the books...... is a benchmark publication in the field of organization design. By focusing on recent developments in organization design, this book will help to create more thoughtful research and stronger empirical analyses in this important area of management and organization....

  20. Design '82

    International Nuclear Information System (INIS)

    1982-01-01

    The papers in the symposium cover many aspects of the economy and effectiveness of chemical engineering design in industrial plants. Among the topics dealt with are the special problems associated with nuclear reprocessing plants. (U.K.)

  1. Persuasiv design

    DEFF Research Database (Denmark)

    Hasle, Per

    2011-01-01

    Purpose – The purpose of this paper is to introduce the theme issue on “Persuasive design”. Design/methodology/approach – This editorial describes the essential ideas and purposes of persuasive design (PD). PD's relation to other IT‐disciplines and rhetoric in general is discussed. A special...... to rhetoric and the concomitant implications for library and information systems is largely original (when compared with other discussions of PD)....

  2. Mechanical design

    Science.gov (United States)

    1976-01-01

    Design concepts for a 1000 mw thermal stationary power plant employing the UF6 fueled gas core breeder reactor are examined. Three design combinations-gaseous UF6 core with a solid matrix blanket, gaseous UF6 core with a liquid blanket, and gaseous UF6 core with a circulating blanket were considered. Results show the gaseous UF6 core with a circulating blanket was best suited to the power plant concept.

  3. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan......Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design...... using criteria such as size, performance parameters, operation environment, etc. Content: Understanding Mechanisms Design (2 weeks) Definitions, mechanisms representations, kinematic diagrams, the four bar linkage, mobility, applications of mechanisms, types of mechanisms, special mechanisms, the design......: equations for various mechanisms. At the end of this module you will be able to analyze existing mechanisms and to describe their movement. Designing mechanisms (7 weeks) Type synthesis and dimensional synthesis, function generation, path generation, three precision points in multi-loop mechanisms...

  4. Tank design

    International Nuclear Information System (INIS)

    Earle, F.A.

    1992-01-01

    This paper reports that aboveground tanks can be designed with innovative changes to complement the environment. Tanks can be constructed to eliminate the vapor and odor emanating from their contents. Aboveground tanks are sometimes considered eyesores, and in some areas the landscaping has to be improved before they are tolerated. A more universal concern, however, is the vapor or odor that emanates from the tanks as a result of the materials being sorted. The assertive posture some segments of the public now take may eventually force legislatures to classify certain vapors as hazardous pollutants or simply health risks. In any case, responsibility will be leveled at the corporation and subsequent remedy could increase cost beyond preventive measures. The new approach to design and construction of aboveground tanks will forestall any panic which might be induced or perceived by environmentalists. Recently, actions by local authorities and complaining residents were sufficient to cause a corporation to curtail odorous emissions through a change in tank design. The tank design change eliminated the odor from fuel oil vapor thus removing the threat to the environment that the residents perceived. The design includes reinforcement to the tank structure and the addition of an adsorption section. This section allows the tanks to function without any limitation and their contents do not foul the environment. The vapor and odor control was completed successfully on 6,000,000 gallon capacity tanks

  5. INFRASTRUCTURING DESIGN

    DEFF Research Database (Denmark)

    Ertner, Sara Marie

    The fact that the average citizen in Western societies is aging has significant implications for national welfare models. What some call ’the grey tsunami’ has resulted in suggestions for, and experiments in, re-designing healthcare systems and elderly care. In Denmark, one attempted solution...... that are imagined as the target group for welfare technology, and where are they located? Based on ethnographic explorations of ’welfare technology’ and related figures that include not only ’the elderly’, but also ’prototypes’ and ’partnership’ the dissertation analyses the processes and socio...... for collaborative design to happen. The implication of this is that technological design should not be imagined as the foundation for shaping more effective health care practices and better welfare. Instead, possibilities for improving practices through welfare technology emerge out of heterogeneous assemblages...

  6. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    are often still not engaged with in a sufficiently manner. Often social sciences keep distance to the physical and material as if the social was still to be understood as a realm separate of technology, architecture, and design (for a critique of this see; Latour 2005 and Urry 2000). This paper takes point......Within the so-called ‘mobilities turn’ (Adey 2010; Cresswell 2006; Urry 2007) much research has taken place during the last decade bringing mobilities into the centre of sociological analysis. However, the materiality and spatiality of artefacts, infrastructures, and sites hosting mobilities...... of departure in the sociological perspective termed ‘Staging Mobilities’ (Jensen 2013a) and utilizes this as an analytical frame for exploring cases of mobility design. The paper put focus on how the material shape, design and architectures of technologies, spaces and sites influence mobilities practices...

  7. Design thinking.

    Science.gov (United States)

    Brown, Tim

    2008-06-01

    In the past, design has most often occurred fairly far downstream in the development process and has focused on making new products aesthetically attractive or enhancing brand perception through smart, evocative advertising. Today, as innovation's terrain expands to encompass human-centered processes and services as well as products, companies are asking designers to create ideas rather than to simply dress them up. Brown, the CEO and president of the innovation and design firm IDEO, is a leading proponent of design thinking--a method of meeting people's needs and desires in a technologically feasible and strategically viable way. In this article he offers several intriguing examples of the discipline at work. One involves a collaboration between frontline employees from health care provider Kaiser Permanente and Brown's firm to reengineer nursing-staff shift changes at four Kaiser hospitals. Close observation of actual shift changes, combined with brainstorming and rapid prototyping, produced new procedures and software that radically streamlined information exchange between shifts. The result was more time for nursing, better-informed patient care, and a happier nursing staff. Another involves the Japanese bicycle components manufacturer Shimano, which worked with IDEO to learn why 90% of American adults don't ride bikes. The interdisciplinary project team discovered that intimidating retail experiences, the complexity and cost of sophisticated bikes, and the danger of cycling on heavily trafficked roads had overshadowed people's happy memories of childhood biking. So the team created a brand concept--"Coasting"--to describe a whole new category of biking and developed new in-store retailing strategies, a public relations campaign to identify safe places to cycle, and a reference design to inspire designers at the companies that went on to manufacture Coasting bikes.

  8. Dark Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    Any design idea or intervention in the world is based on an underpinning logic or a set of normative principles and values. At times such will be very explicit, at other times they will be unspoken and tacit. In this paper the underpinning values leading to power exercise, social exclusion, and d...... of technologies (e.g. Graham 2010). The paper re-works how inequalities are ‘staged’ through overt and covert design ideas and interventions shaping and re-shaping the social geography of a world increasingly marked by the rights, abilities, and opportunities to move freely – or not!...

  9. Design & Innovation

    DEFF Research Database (Denmark)

    Boelskifte, Per; Jørgensen, Ulrik

    2005-01-01

    The new design and innovation programme at DTU is challenging some of the standard concepts dominating most engineering educations. The programme, its background, context and basic educational ideas are presented and discussed in this paper. To build competences that match the need for innovative...... and design oriented engineers in industry and society has turned out to challenge a number of the standard – and often taken for granted – concepts in engineering education still dominated world wide by rather strict norms and concepts of learning that do not challenge the students creativity and innovative...

  10. Lighting Design

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine; Mullins, Michael

    2014-01-01

    of design developed from three experiments show how distinct qualitative and quantitative criteria in different disciplinary traditions can be integrated successfully, despite disparate technical/scientific, social scientific and art/humanities backgrounds. The model is applied to a pedagogical curriculum......Light as a multi-dimensional design element has fundamental importance for a sustainable environment. The paper discusses the need for an integration of scientific, technical and creative approaches to light and presents theory, methods and applications toward fulfilling this need. A theory...

  11. VLSI design

    CERN Document Server

    Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 14: VLSI Design presents a comprehensive exposition and assessment of the developments and trends in VLSI (Very Large Scale Integration) electronics. This volume covers topics that range from microscopic aspects of materials behavior and device performance to the comprehension of VLSI in systems applications. Each article is prepared by a recognized authority. The subjects discussed in this book include VLSI processor design methodology; the RISC (Reduced Instruction Set Computer); the VLSI testing program; silicon compilers for VLSI; and special

  12. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    How is the width of the pavement shaping the urban experience? How is the material design of transport infrastructure and mobile technology affording social interaction in everyday life spaces? How do people inhabit these spaces with their bodies and in accordance to social and cultural norms...

  13. Designed communities?

    DEFF Research Database (Denmark)

    Stender, Marie

    2013-01-01

    In current residential spaces there seem to be an increasing emphasis on small-scale communities. A number of new, high profiled residential complexes thus seek to promote new ways of social living by rethinking architectural design, typologies and concepts. In this paper I explore the emergence ...

  14. Design junctions

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2012-01-01

    . This case study illustrates how dominant regimes of practice, established through the conception of pathogen bacteria and antibacterial treatments and disinfection, are now creating signals that call into question fundamental design of hygiene practices. By examining the epistemic assumptions of scientific...

  15. Participatory Design

    DEFF Research Database (Denmark)

    Robertson, Toni; Simonsen, Jesper

    2012-01-01

    focus of later chapters. The target audience is identified, and the structure of the book explained. A short description of each chapter highlights its particular contributions as well as the associated challenges facing designers and researchers engaged in participatory approaches. The chapter...

  16. Designer's Identity

    DEFF Research Database (Denmark)

    Kunrath, Kamila; Cash, Philip; Li-Ying, Jason

    2016-01-01

    A designer’s professional identity (DPI) develops through both education and professional experience, building on core personality traits and innate skills. In this paper a systematic literature review and a secondary narrative review were developed in order to map personal attributes and design...

  17. Appraising design

    Science.gov (United States)

    2016-05-26

    Acronyms ADM Army Design Methodology AFRICOM Africa Command CAS Complex Adaptive System COCOM...the case studies. It does not analyze the moral forces of training, quality of troops, and readiness. It also does not analyze national strength in...Second Lebanese War.110 Issues included a lack of vests, medical equipment, radios, ammunition, night vision devices (NVD), and food and water for the

  18. Dwelling Designers

    Science.gov (United States)

    Szekely, George

    2012-01-01

    Children's inventions go far beyond track housing or Ethan Allen furniture; they foreshadow the most innovative ideas in building forms and interior designs. Children improvise with containers and find places in a home that suggest enticing dwellings. A drawer left open becomes a balcony, soap trays become cots, and the space between twin beds…

  19. Probabilistic Design

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.

    This chapter describes how partial safety factors can be used in design of vertical wall breakwaters and an example of a code format is presented. The partial safety factors are calibrated on a probabilistic basis. The code calibration process used to calibrate some of the partial safety factors...

  20. Intimate Design

    DEFF Research Database (Denmark)

    Søndergaard, Marie Louise Juul

    2017-01-01

    I examine how design can reflect on and critically discuss political and cultural issues of intimate technologies, such as gender and identity, embodied experiences, privacy, intimate data and sharing. In presenting my PhD project's background, research objectives, hypothesis and methodological...

  1. Collaborative Design

    Science.gov (United States)

    Broderick, Debora

    2014-01-01

    This practitioner research study investigates the power of multimodal texts within a real-world context and argues that a participatory culture focused on literary arts offers marginalized high school students opportunities for collaborative design and authoring. Additionally, this article invites educators to rethink the at-risk label. This…

  2. Integreret Design

    DEFF Research Database (Denmark)

    Helweg-Larsen, Klavs; Lenau, Torben Anker; Kristensen, Tore

    Integreret Design (ItD) var et tværdisciplinært kursus, der gennemførtes i samarbejde mellem Danmarks Designskole, Danmarks Tekniske Universitet og Handelshøjskolen i København i årene 1998 - 2001. Som støtte for undervisningen blev der udviklet et kompendium i bogform, som udgives af Danmarks...

  3. Didaktisk Design

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Levinsen, Karin

    projekter - Individuelle fordybelsesprojekter. Forfatterne introducerer begrebet elever som didaktiske designere og viser med konkrete eksempler fra dansk, matematik og tværfaglige forløb, hvordan læreren med et overordnet rammedesign kan understøtte elevernes design af deres egne læreprocesser og dermed...

  4. Safety design

    International Nuclear Information System (INIS)

    Kunitomi, Kazuhiko; Shiozawa, Shusaku

    2004-01-01

    JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs. This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R and D needs for establishing the safety philosophy for the future HTGRs are reported

  5. Design i Danmark = Danish Design?

    DEFF Research Database (Denmark)

    Lentz, Uffe

    2003-01-01

    Titlen på denne forelæsning har 3 led skønt det ser ud som om der er 4. Design i Danmark er en geografisk afgrænsning af et ikke særligt veldefineret begreb, der både kan dække over ting og aktiviteter, mens Danish Design er en fælles hat man har markedsført en række produkter under, for at få...... værdiopfattelse før fra det ene produkt til det andet. Et Brand ville det hedde i dag....

  6. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix

    Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the background of the ‘mobilities turn’ (e.g. Cresswell 2006, Urry 2007) this book articulates a new and emerging research field, namely that of ‘m......Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the background of the ‘mobilities turn’ (e.g. Cresswell 2006, Urry 2007) this book articulates a new and emerging research field, namely...... that of ‘mobilities design’. The book revolves around the following research question: How are design decisions and interventions staging mobilities? It builds upon the Staging Mobilities model (Jensen 2013) in an explorative inquiry into the problems and potentials of the design of mobilities. The exchange value...

  7. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix

    2016-01-01

    of life’ for billions of people in the everyday life. This paper is structured in three parts. After the general introduction we present the mobilities theory perspective of ‘staging mobilities’ and connects this to the empirical phenomenon of parking lots and their design. The paper ends in section three......Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the backgound of the ‘mobilities turn’ (for short review paper on this see; Sheller 2011, Vannini 2010) this paper proposes a further development...... of the perspective in the direction of a material and design oriented turn. In order to fulfill this purpose we articulate a new and emerging research field, namely that of ‘mobilities design’. In our understanding time has come to articulate ‘Mobilities Design’ as a dedicated research field in and of its own...

  8. Design Transformations

    DEFF Research Database (Denmark)

    Morrison, Ann; Knoche, Hendrik

    2014-01-01

    Purpose – Taking a case study approach, we synchronised two courses to focus on the students working with learning and applying tools in the one course and acting on understandings gained to produce artefacts in the other. Design/methodology/approach – Working with real users throughout all stages...... focused evaluation methods using tangible representations; identified the relationship from these findings for subsequent re-design rationales; and discussed and critiqued each other’s work using multiple feedback, teach-back and discursive strategies. Findings – We found that in-depth coverage...... of material, working with real data and users at all stages of assessment and producing visualisations from evaluations, naturally forced student motivation to act and redesign better solutions. We noted improved attendance and students reported high engagement and content appreciation. Research limitations...

  9. Organization Design

    OpenAIRE

    Milton Harris; Artur Raviv

    2002-01-01

    This paper attempts to explain organization structure based on optimal coordination of interactions among activities. The main idea is that each manager is capable of detecting and coordinating interactions only within his limited area of expertise. Only the CEO can coordinate company wide interactions. The optimal design of the organization trades off the costs and benefits of various configurations of managers. Our results consist of classifying the characteristics of activities and manager...

  10. Designing Privacy-by-Design

    NARCIS (Netherlands)

    Rest, J.H.C. van; Boonstra, D.; Everts, M.H.; Rijn, M. van; Paassen, R.J.G. van

    2014-01-01

    The proposal for a new privacy regulation d.d. January 25th 2012 introduces sanctions of up to 2% of the annual turnover of enterprises. This elevates the importance of mitigation of privacy risks. This paper makes Privacy by Design more concrete, and positions it as the mechanism to mitigate these

  11. Design livre: cannibalistic interaction design

    NARCIS (Netherlands)

    van Amstel, Frederick; Vassao, C.A.; Ferraz, G.B.; Formia, E.M.

    2012-01-01

    This paper provides a historical account of cannibalism as used to explain how Brazilians integrate foreign cultural influences into their own culture and introduces a design praxis based on it. From Modernism to Digital Culture, cannibalism is a recurring tactic used to overcome cultural traditions

  12. Mechanical Design

    Energy Technology Data Exchange (ETDEWEB)

    Shook, Richard; /Marquette U. /SLAC

    2010-08-25

    The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by [1]. It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x{sub 0}2{sup n} where n is the step of attenuation desired and x{sub 0} is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

  13. Mechanical Design

    International Nuclear Information System (INIS)

    2010-01-01

    The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by (1). It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x 0 2 n where n is the step of attenuation desired and x 0 is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

  14. Designed Places

    DEFF Research Database (Denmark)

    Stender, Marie

    The 2008 financial crisis has left traces in the built environment of Copenhagen like many other places: Building projects are left unfinished or their function or finish is changed due to new economic circumstances. An ethnographic exploration of these traces exposes central aspects of what is a......, and when the ceilings leak water, the residents suspect it to be a consequence of the crisis. The paper discusses how market forces interact with the material surroundings we inhabit and explores the relationship between controlled and uncontrollable in the design of places....

  15. Temperature profiles from MBT casts from the CAMPBELL from Ocean Weather Station B (OWS-B), C (OWS-C), D (OWS-D), E (OWS-E), and H (OWS-H) in the North Atlantic Ocean from 1953-10-23 to 1966-11-08 (NODC Accession 7500359)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathythermograph data were collected from the CAMPBELL within a 1-mile radius of Ocean Weather Station B (5630N 05100W), C (5245N 03530W), D (4400N 04100W), E (3500N...

  16. Pramana – Journal of Physics | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    ... volume and the gas volumetric flow were increased by increasing the electrode separation keeping the gas flow velocity constant. The discharge voltage too remained almost constant with the change of electrode separation at the same gas flow velocity. This necessitated revision of the scaling laws for designing this type ...

  17. Group Design Problems in Engineering Design Graphics.

    Science.gov (United States)

    Kelley, David

    2001-01-01

    Describes group design techniques used within the engineering design graphics sequence at Western Washington University. Engineering and design philosophies such as concurrent engineering place an emphasis on group collaboration for the solving of design problems. (Author/DDR)

  18. Democratic design experiments

    DEFF Research Database (Denmark)

    Ehn, Pelle; Brandt, Eva; Halse, Joachim

    2016-01-01

    Designers and design researchers are increasingly exploring societal challenges through engagements with issues that call forward new publics and new modes of democratic citizenship. Whatever this is called design activism, social design, adversarial design, participatory design or something else...

  19. Contract design

    International Nuclear Information System (INIS)

    Bradley, P.

    2006-01-01

    The current state of the electric power industry in Ontario was discussed with particular reference to the procurement of contracts and why the Ontario Power Authority (OPA) must be contracting to resolve many of Ontario's electricity issues. As Ontario increasingly relies on imports and natural gas-fired generation, the price of electricity continues to rise given that supply is at a low level. In addition to the generation gap, there are also several transmission constrained areas in Ontario, particularly in the Greater Toronto Area (GTA). The OPA announced 2 projects totalling 1900 MW to relieve congestion. According to the Independent Electricity System Operator (IESO), the total potential opportunity for new generation by 2015 is about 5,000 to 7,000 megawatts. OPA is expected to launch procurement processes for up to 1000 MW of cogeneration, 250 MW of province-wide conservation initiatives, 1900 MW of generation in the western part of the GTA, and 600 MW of generation in downtown Toronto. New nuclear capacity is also anticipated in addition to renewables and conservation/demand management (CDM) initiatives. The OPA's competitive procurement processes will include requests for expressions of interest, requests for qualifications and requests for proposals. The challenge of balancing the technical complexities and realities of procuring generation assets with the need for a fair procurement process was discussed. Contracts will be designed to react to market signals and will include 3 styles: tariff style, tolling style and standard offer contract. OPA will make every effort to balance generator and ratepayer interests. 6 figs

  20. Efecto del pH y de la adición de fosfatos de sodio sobre las propiedades de gelificación y emulsión de surimi de trucha arco-iris (Oncorhynchus mykiss Efeito do pH e da adição de fosfatos de sódio sobre as propriedades de gelificação e emulsão de surimi de truta arco-íris (Oncorhynchus mykiss

    Directory of Open Access Journals (Sweden)

    Juan Díaz-Vela

    2008-09-01

    Full Text Available Para la elaboración de surimi se han empleado distintas técnicas, sin embargo, es indispensable mantener la funcionalidad de las proteínas musculares durante su extracción, ya que son afectadas principalmente por el pH. La incorporación de fosfatos en productos cárnicos afecta el pH, teniendo como consecuencia una mejora en la capacidad de retención de agua de las proteínas musculares, alterando la funcionalidad de estos productos. Se utilizó la metodología de superficie de respuesta para determinar el efecto de cinco niveles de pH y cinco concentraciones de una mezcla de fosfatos de sodio comercial sobre la funcionalidad de surimi de trucha arco-iris, evaluada por su capacidad de emulsión y trabajo de emulsión, fuerza de gel y trabajo de penetración de geles de surimi. Los resultados obtenidos indican que el incremento en la concentración de fosfatos de sodio mejoró la funcionalidad del surimi y a pH alcalino las propiedades de emulsión mejoraron, pero se afectaron negativamente las propiedades de gelificación.Para a elaboração de surimi, diferentes técnicas podem ser usadas, mas é indispensável manter a funcionalidade das proteínas miofibrilares, afetadas principalmente pelo pH, durante o processo. A incorporação de fosfatos a produtos cárneos afeta o pH, tendo como conseqüência, principalmente, a melhoria da capacidade de retenção de água do músculo, alterando a funcionalidade destes produtos. A metodologia de superfície de resposta foi usada para determinar a influência de cinco níveis de pH e cinco concentrações de uma mistura comercial de fosfatos de sódio sobre a funcionalidade de surimi de truta arco-íris, avaliada através de sua capacidade de emulsificação e trabalho de emulsificação, força de gel e trabalho de penetração de géis de surimi. Os resultados obtidos indicam que o aumento na concentração dos fosfatos de sódio melhorou a funcionalidade do surimi e que o pH alcalino favoreceu

  1. Design Argumentation in Academic Design Education

    DEFF Research Database (Denmark)

    Dalsgaard, Peter; Dindler, Christian; Fritsch, Jonas

    2013-01-01

    We explore design argumentation as a resource when teaching interaction design in a university setting. We propose that design argumentation can help bridge between practice-based design education and theoretical issues from university curricula. In this paper, we outline the idea of design...

  2. Application of mixture experimental design to simvastatin apparent solubility predictions in the microemulsifion formed by self-microemulsifying.

    Science.gov (United States)

    Meng, Jian; Zheng, Liangyuan

    2007-09-01

    Self-microemulsifying drug delivery systems (SMEDDS) are useful to improve the bioavailability of poorly water-soluble drugs by increasing their apparent solubility through solubilization. However, very few studies, to date, have systematically examined the level of drug apparent solubility in o/w microemulsion formed by self-microemulsifying. In this study, a mixture experimental design was used to simulate the influence of the compositions on simvastatin apparent solubility quantitatively through an empirical model. The reduced cubic polynomial equation successfully modeled the evolution of simvastatin apparent solubility. The results were presented using an analysis of response surface showing a scale of possible simvastatin apparent solubility between 0.0024 ~ 29.0 mg/mL. Moreover, this technique showed that simvastatin apparent solubility was mainly influenced by microemulsion concentration and, suggested that the drug would precipitate in the gastrointestinal tract due to dilution by gastrointestinal fluids. Furthermore, the model would help us design the formulation to maximize the drug apparent solubility and avoid precipitation of the drug.

  3. Dansk design - English edition

    DEFF Research Database (Denmark)

    Dickson, Thomas

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  4. System design projects for undergraduate design education

    Science.gov (United States)

    Batill, S. M.; Pinkelman, J.

    1993-01-01

    Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

  5. Sharing the design intent between industrial designers and engineering designers

    DEFF Research Database (Denmark)

    Laursen, Esben Skov; Møller, Louise

    2016-01-01

    The aim of the paper is to understand the challenges sharing the product frame between industrial designers with the engineering designers. The study is based on six case studies. The analysis showed correspondence between industrial designers and engineering designers in their understanding...... of the key elements of the context and concept. However the analysis also showed a lack of correspondence between the industrial designers and engineering designers in regards to the product framing and thereby how the different elements of the product frame is connected and interrelated....

  6. Service design : Tuning the industrial design profession

    NARCIS (Netherlands)

    Sleeswijk Visser, F.

    2013-01-01

    Design is not only about the design and production of goods, but is increasingly addressing complex social issues nowadays. Roles of designers are becoming more and more varied, and at the same time other professionals are increasingly using design tools in their business, organizational or other

  7. Designing for critique, designing for reflection

    DEFF Research Database (Denmark)

    Løfgreen, Lars Bo

    2010-01-01

    litteraturliste og et stikordsregister. Bogen rummer kapitlerne: “Visual topography: analysing the visual context of an interactive interface” af Lise Agerbæk, “Designing (with) Creativity” af Heidi Philipsen, “Designing for critique, designing for reflection – the (re)emergence of aesthetics in current design...

  8. Designing interfaces patterns for effective interaction design

    CERN Document Server

    Tidwell, Jenifer

    2005-01-01

    This convenient resource offers advice on creating user-friendly interface designs--whether they're delivered on the Web, a CD, or a smart" devices like a cell phone. Solutions to common UI design problems are expressed as a collection of patterns--each one containing concrete examples, recommendations, and warnings. Intended for designers with basic UI design knowledge

  9. Enhancing biomedical design with design thinking.

    Science.gov (United States)

    Kemnitzer, Ronald; Dorsa, Ed

    2009-01-01

    The development of biomedical equipment is justifiably focused on making products that "work." However, this approach leaves many of the people affected by these designs (operators, patients, etc.) with little or no representation when it comes to the design of these products. Industrial design is a "user focused" profession which takes into account the needs of diverse groups when making design decisions. The authors propose that biomedical equipment design can be enhanced, made more user and patient "friendly" by adopting the industrial design approach to researching, analyzing, and ultimately designing biomedical products.

  10. Design methods and design theory for architectural design management

    NARCIS (Netherlands)

    Achten, H.H.; Otter, den A.F.H.J.; Achten, H.H.; Pels, H.J.

    2008-01-01

    Most parties that an architectural design manager meets in daily practice are engaged to some degree with design. What these parties are actually doing in a project is contingent with the concrete design project. Additionally, each party has some stake, and may employ different strategies to solve

  11. Managing collaborative design

    NARCIS (Netherlands)

    Sebastian, R.

    2007-01-01

    Collaborative design has been emerging in building projects everywhere. The more complex a building project becomes, the closer and more intensive collaboration between the design actors is required. This research focuses on collaborative design in the conceptual architecture design phase,

  12. Design for Accessibility

    DEFF Research Database (Denmark)

    Herriott, Richard

    2012-01-01

    A report on how nine rail builder, operators and transport designers deal with design for accessibility......A report on how nine rail builder, operators and transport designers deal with design for accessibility...

  13. Design is an Attitude

    DEFF Research Database (Denmark)

    Eriksen, Kaare Riise

    2005-01-01

    Arttiklen beskriver den mexicanske designer Rafael Davidsons arbejder gennem en menneskealder, samt hans visioner for mexicansk design i fremtiden.......Arttiklen beskriver den mexicanske designer Rafael Davidsons arbejder gennem en menneskealder, samt hans visioner for mexicansk design i fremtiden....

  14. Design Research between Design and Research

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Markussen, Thomas

    2011-01-01

    The discourse on architecture and design research in Denmark in the past thirty years has been stuck in a unproductive dichotomy between research through design on the one hand and a phantom image of academic and theoretical, word-based research on the other. Advocates of the research through...... design strand have argued, that architecture and design research must follow an architecture and design methodology – designing – and be communicated by means of architecture and design media – images and artefacts. Essentially, this view sees no difference between architecture and design research...... and practice, as expressed in the notion of research as ‘artistic innovation work’. On the other hand, the pressure to expand research in architecture and design has seen a movement towards adopting traditional research paradigms from the technical and social sciences and humanities. For many architects...

  15. Design Games for In-Situ Design

    DEFF Research Database (Denmark)

    Kristiansen, Erik

    2013-01-01

    The mobile culture has spawned a host of context-based products, like location-based and tag-based applications. This presents a new challenge for the designer. There is a need of design methods that acknowledge the context and allows it to influence the design ideas. This article focuses...... on a design problem where an in-situ design practice may further the early design process: the case of designing a pervasive game. Pervasive games are computer games, played using the city as a game board and often using mobile phones with GPS. Some contextual design methods exist, but we propose an approach...... sitestorming, is based on a game using Situationistic individual exploration of the site and different types of game cards, followed by a joint evaluation of the generated ideas. A series of evaluations showed that the designers found the method enjoyable to use, that the method motivated idea generation...

  16. Design of modern experiments

    International Nuclear Information System (INIS)

    Park, Sung Hweon

    1984-03-01

    This book is for researchers and engineers, which is written to focus on practical design of experiments. It gives descriptions of conception of design of experiments, basic statistics theory, one way design of experiment, two-way layout without repetition, two-way layout with repetition, partition, a correlation analysis and regression analysis, latin squares, factorial design, design of experiment by table of orthogonal arrays, design of experiment of response surface, design of experiment on compound, Evop, and design of experiment of taguchi.

  17. Computational Design Tools for Integrated Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    In an architectural conceptual sketching process, where an architect is working with the initial ideas for a design, the process is characterized by three phases: sketching, evaluation and modification. Basically the architect needs to address three areas in the conceptual sketching phase......: aesthetical, functional and technical requirements. The aim of the present paper is to address the problem of a vague or not existing link between digital conceptual design tools used by architects and designers and engineering analysis and simulation tools. Based on an analysis of the architectural design...... process different digital design methods are related to tasks in an integrated design process....

  18. Full factorial design optimization of anti-inflammatory drug release by PCL–PEG–PCL microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Azouz, L' Hachemi, E-mail: azouz.chimie@gmail.com [Laboratoire des Matériaux Organiques (LMO), Faculté des Sciences Exactes, Département de Chimie, Université de Bejaia, 06000 Bejaia Algérie (Algeria); Dahmoune, Farid, E-mail: farid.dahmoune@yahoo.fr [Laboratoire de Biomathématiques, Biophysique, Biochimie et Scientométrie (L3BS-Bejaia), Faculté des Sciences de la Nature et de la Vie et des Sciences de la Terre, Université de Bouira 10000 Bouira (Algeria); Rezgui, Farouk, E-mail: rezgui-farouk@netcourrier.com [Laboratoire des Matériaux Organiques (LMO), Faculté de Technologie, Département de Génie des Procédés, Université de Bejaia, 06000 Bejaia (Algeria); G' Sell, Christian, E-mail: gsell.christian@univ-lorraine.fr [Université de Lorraine, Pôle scientifique M4, Institut Jean Lamour - UMR CNRS-UL 7198, Département SI2M, 54000 Nancy (France)

    2016-01-01

    A biodegradable triblock poly(ε-caprolactone)–poly(ethylene glycol)–poly(ε-caprolactone) copolymer was successfully synthesized by ring-opening polymerization of ε-caprolactone, and was characterized by intrinsic viscosimetry, {sup 1}H nuclear magnetic resonance, infrared spectroscopy and X-ray diffraction. Copolymer microparticles loaded with ibuprofen were prepared by an oil-in-water (o/w) emulsion solvent evaporation process. They were carefully weighted and characterized through their zeta potential. In this work, 4 selected process parameters (shaking speed X{sub 1}, time of contact X{sub 2}, poly(vinyl alcohol) concentration X{sub 3}, and ibuprofen concentration X{sub 4}) were adjusted at 2 different values. For each of the 16 experimental conditions, repeated twice, the drug encapsulation efficiency of the microspheres was determined, according to the following definition: EE (X{sub 1}, X{sub 2}, X{sub 3}, X{sub 4}) = mass of encapsulated ibuprofen / total weight of ibuprofen. A “full factorial design method” was applied to analyze the results statistically according to a polynomial fit and to determine the optimal conditions for the microencapsulation of the ibuprofen through an accurate statistical protocol. The microparticles obtained exhibit a spherical shape as shown by electron microscopy. - Highlights: • PCEC copolymer was synthesized by ring-opening polymerization of ε-caprolactone. • 2{sup 4} experimental design was used to optimize the IBF encapsulation efficiency (EE). • 88.86% of ibuprofen (IBF) was encapsulated in PCEC microspheres. • EE significantly decreases with increasing shaking speed (antagonist effect). • EE significantly increases with increasing IBF concentration (synergetic effect).

  19. Full factorial design optimization of anti-inflammatory drug release by PCL–PEG–PCL microspheres

    International Nuclear Information System (INIS)

    Azouz, L'Hachemi; Dahmoune, Farid; Rezgui, Farouk; G'Sell, Christian

    2016-01-01

    A biodegradable triblock poly(ε-caprolactone)–poly(ethylene glycol)–poly(ε-caprolactone) copolymer was successfully synthesized by ring-opening polymerization of ε-caprolactone, and was characterized by intrinsic viscosimetry, 1 H nuclear magnetic resonance, infrared spectroscopy and X-ray diffraction. Copolymer microparticles loaded with ibuprofen were prepared by an oil-in-water (o/w) emulsion solvent evaporation process. They were carefully weighted and characterized through their zeta potential. In this work, 4 selected process parameters (shaking speed X 1 , time of contact X 2 , poly(vinyl alcohol) concentration X 3 , and ibuprofen concentration X 4 ) were adjusted at 2 different values. For each of the 16 experimental conditions, repeated twice, the drug encapsulation efficiency of the microspheres was determined, according to the following definition: EE (X 1 , X 2 , X 3 , X 4 ) = mass of encapsulated ibuprofen / total weight of ibuprofen. A “full factorial design method” was applied to analyze the results statistically according to a polynomial fit and to determine the optimal conditions for the microencapsulation of the ibuprofen through an accurate statistical protocol. The microparticles obtained exhibit a spherical shape as shown by electron microscopy. - Highlights: • PCEC copolymer was synthesized by ring-opening polymerization of ε-caprolactone. • 2 4 experimental design was used to optimize the IBF encapsulation efficiency (EE). • 88.86% of ibuprofen (IBF) was encapsulated in PCEC microspheres. • EE significantly decreases with increasing shaking speed (antagonist effect). • EE significantly increases with increasing IBF concentration (synergetic effect).

  20. Analog circuit design designing high performance amplifiers

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    The third volume Designing High Performance Amplifiers applies the concepts from the first two volumes. It is an advanced treatment of amplifier design/analysis emphasizing both wideband and precision amplification.

  1. Analog circuit design designing dynamic circuit response

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    This second volume, Designing Dynamic Circuit Response builds upon the first volume Designing Amplifier Circuits by extending coverage to include reactances and their time- and frequency-related behavioral consequences.

  2. Design rules for dynamic organization design

    DEFF Research Database (Denmark)

    Burton, Richard; Obel, Børge

    2013-01-01

    Organizational design rules are contingent if-then statements about what a good design should be for a given situation. Today’s challenge is to look forward to devise organization design rules for a different future with greater uncertainty and greater interdependency – all with dynamic performance...... demands. These new demands call for new design rules for coordination, incentives and leadership, among others. Our existing rules are mostly based upon past experience and empirical studies of what is. What might be – going beyond what we have observed and explained of yesterday and today to help design...... for a future new situation – is a disciplined response to examine the new contingencies of organizational design and their design consequences. Computational laboratories permit us to go beyond what is to develop and examine new design possibilities and boundaries to explore a future world of what might be. We...

  3. Money and Design

    Directory of Open Access Journals (Sweden)

    Artur Borcuch

    2015-01-01

    Full Text Available The purpose of this article is to analyze the influence of the money design on willingness to make purchases. In this paper, we focus on three aspects that structure the relation between money and design: the link between design and finance (in general, determinants of design and perspective of currency design. The main research problem explored in this paper is: Does the money design have influence on the willingness to make purchases by employees/employers at design studios, design students and students of economics/management? The main hypothesis is as follows – the more experience in design practice, the more important is money design.

  4. Design as Value Celebration: Rethinking Design Argumentation

    DEFF Research Database (Denmark)

    Halstrøm, Per Liljenberg

    2016-01-01

    This article introduces knowledge of the rhetorical genre of epideictic to design. The aim is to provide designers with concepts that stimulate their ability to deliberate about design choices and explore the arguments they may be making about the human-made world. The article begins with explora...

  5. Ergonomics in design or design in ergonomics

    DEFF Research Database (Denmark)

    Binder, Thomas

    2005-01-01

    Design in Scandinavia has a long tradition of participation in the development of society. Designers in the Nordic countries have taken pride in concerning themselves with problems of everyday living and the design communities at large have been committed proponents of a socially responsible appr...

  6. Design of a high altitude long endurance flying-wing solar-powered unmanned air vehicle

    Science.gov (United States)

    Alsahlani, A. A.; Johnston, L. J.; Atcliffe, P. A.

    2017-06-01

    The low-Reynolds number environment of high-altitude §ight places severe demands on the aerodynamic design and stability and control of a high altitude, long endurance (HALE) unmanned air vehicle (UAV). The aerodynamic efficiency of a §ying-wing configuration makes it an attractive design option for such an application and is investigated in the present work. The proposed configuration has a high-aspect ratio, swept-wing planform, the wing sweep being necessary to provide an adequate moment arm for outboard longitudinal and lateral control surfaces. A design optimization framework is developed under a MATLAB environment, combining aerodynamic, structural, and stability analysis. Low-order analysis tools are employed to facilitate efficient computations, which is important when there are multiple optimization loops for the various engineering analyses. In particular, a vortex-lattice method is used to compute the wing planform aerodynamics, coupled to a twodimensional (2D) panel method to derive aerofoil sectional characteristics. Integral boundary-layer methods are coupled to the panel method in order to predict §ow separation boundaries during the design iterations. A quasi-analytical method is adapted for application to flyingwing con¦gurations to predict the wing weight and a linear finite-beam element approach is used for structural analysis of the wing-box. Stability is a particular concern in the low-density environment of high-altitude flight for flying-wing aircraft and so provision of adequate directional stability and control power forms part of the optimization process. At present, a modified Genetic Algorithm is used in all of the optimization loops. Each of the low-order engineering analysis tools is validated using higher-order methods to provide con¦dence in the use of these computationally-efficient tools in the present design-optimization framework. This paper includes the results of employing the present optimization tools in the design of a

  7. Modelling of Water Cooled Fuel Including Design Basis and Severe Accidents. Proceedings of a Technical Meeting

    International Nuclear Information System (INIS)

    2015-11-01

    OECD Nuclear Energy Agency in Helsinki, Finland), 1983 (Risø, Denmark), 1986 (Vienna, Austria), 1988 (Preston, United Kingdom), 1992 (Pembroke, Canada), 1995 (Dimitrovgrad, Russian Federation), 2001 (Halden, Norway) and 2011 (Mito, Japan). The 2011 meeting, in Japan, focused on fuel behaviour and modelling under design basis accidents. Such a short interval of two years between these last two technical meetings emphasizes the importance of the subject and the urgency to accelerate the process of accident related fuel behaviour code development and verification. The meeting was attended by 30 specialists in fuel performance modelling and experimental support from 16 Member States, and the Joint Research Centre’s Institute for Transuranium Elements. A total of 21 papers were presented at three sessions

  8. Design and Development of Bioceramic Based Functionalized PLGA Nanoparticles of Risedronate for Bone Targeting: In-vitro Characterization and Pharmacodynamic Evaluation.

    Science.gov (United States)

    Rawat, Purnima; Manglani, Kapil; Gupta, Sarika; Kalam, Abul; Vohora, Divya; Ahmad, Farhan Jalees; Talegaonkar, Sushama

    2015-10-01

    Bioceramic(Hydroxyapatite) based Poly(D,L-lactide-co-glycolide) (PLGA) and polyethylene glycol (PEG) nanoparticles of Risedronate was prepared by dialysis method for bone-targeting. Risedronate, a targeting moiety that has a strong affinity for bone, was conjugated to PLGA via carbodiimide chemistry. Mono-methoxy PEG(mPEG)-PLGA block polymers were synthesized and used to impart surface hydrophilicity to nanoparticles to avoid its uptake by reticuloendothelial system (RES). The structure of prepared di block copolymers were characterized by FT-IR and NMR spectrometry. Risedronate was adsorbed on the surface of hydroxyapatite (RIS-HA) and it was conjugated with different ratios of mPEG-PLGA. The formation of surface-modified PLGA nanoparticle prepared with various ratios of risedronate as well as hydroxyapatite and mPEG was confirmed by (1)H NMR and FT-IR spectrometry. Size and % entrapment of the prepared nanoparticle was found to be 79.3 ± 2.3 nm and 93 ± 3.1%. Transmission electron microscopy (TEM) revealed that mPEG-PLGA-RIS-HA nanoparticles possess smooth and uniform surface. Pharmacodynamic study was performed on Dexamethasone (DEX) induced osteoporotic model. The effect of various formulations (mPEG-PLGA-RIS, mPEG-PLGA-RIS-HA and RISOFOS tablet) on bone was studied by Volume bone density (VBD) and by histopathological evaluation. Interestingly mPEG-PLGA-RIS-HA, showed a significant enhancement in bone micro-architecture when compared with other formulations. The results strongly implicated that mPEG-PLGA-RIS-HA has a therapeutic benefits over risedronate sodium monotherapy for the treatment of osteoporosis in a rat model.

  9. Eindhoven school for technological design : design education and design research

    NARCIS (Netherlands)

    Trum, H.M.G.J.; Oxman, R.M.; Bax, M.F.Th.

    1995-01-01

    Nine years after starting the two-year post-graduate programme on technological design [Ackermans and Trum, 1988], Eindhoven University of Technology (EUT) decided to enhance the development of synthesis-oriented engineering education by establishing a post-graduate school for technological design.

  10. Virtual Bridge Design Challenge

    Science.gov (United States)

    Mitts, Charles R.

    2013-01-01

    This design/problem-solving activity challenges students to design a replacement bridge for one that has been designated as either structurally deficient or functionally obsolete. The Aycock MS Technology/STEM Magnet Program Virtual Bridge Design Challenge is an authentic introduction to the engineering design process. It is a socially relevant…

  11. The Distributed Criterion Design

    Science.gov (United States)

    McDougall, Dennis

    2006-01-01

    This article describes and illustrates a novel form of the changing criterion design called the distributed criterion design, which represents perhaps the first advance in the changing criterion design in four decades. The distributed criterion design incorporates elements of the multiple baseline and A-B-A-B designs and is well suited to applied…

  12. Medicines by Design

    Science.gov (United States)

    ... Home > Science Education > Medicines By Design Medicines By Design Spotlight Nature's Medicine Cabinet A Medicine's Life Inside ... hunt for drugs of the future. Medicines By Design in PDF | E-PUB Tell Us What You ...

  13. Design Sea State

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    National codes of practice which specifies the design wave climate on a given location do not yet exist. Nevertheless, decision on the design wave climate is one of the most important tasks of the designer....

  14. Responsive web design workflow

    OpenAIRE

    LAAK, TIMO

    2013-01-01

    Responsive Web Design Workflow is a literature review about Responsive Web Design, a web standards based modern web design paradigm. The goals of this research were to define what responsive web design is, determine its importance in building modern websites and describe a workflow for responsive web design projects. Responsive web design is a paradigm to create adaptive websites, which respond to the properties of the media that is used to render them. The three key elements of responsi...

  15. Design of chemical plant

    International Nuclear Information System (INIS)

    Lee, Dong Il; Kim, Seung Jae; Yang, Jae Ho; Ryu, Hwa Won

    1993-01-01

    This book describes design of chemical plant, which includes chemical engineer and plan for chemical plant, development of chemical process, cost engineering pattern, design and process development, general plant construction plan, project engineering, foundation for economy on assets and depreciation, estimation for cost on capital investment and manufacturing cost, design with computers optimal design and method like fluid mechanics design chemical device and estimation for cost, such as dispatch of material and device writing on design report and appendixes.

  16. Analog circuit design

    CERN Document Server

    Dobkin, Bob

    2012-01-01

    Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are being challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions aids engineers with elegant and practical design techniques that focus on common analog challenges. The book's in-depth application examples provide insight into circuit design and application solutions that you can apply in today's demanding designs. <

  17. The Communication Between Designer and Design Receiver

    DEFF Research Database (Denmark)

    Dai, Zheng; Dai, Yan

    2009-01-01

    When people think about a product,the first impression always mainly influences the result.Product is the medium of communication between designer and designer receiver.Because both of them have varied different experience and background,the information would be biased during the transferring...... process.The common symbols which can be recognized by both of designer and receiver are the key tools for communication.In some case,the same symbol in one product would be leads to different receiver impression.Generally,impression includes 3 aspects:aesthetics,function, and emotion.Designer needs...... to create an attractive and accurate impression in product from these 3 aspects.For facing the dilemma of communication,some experimental approaches can help designer deal with unique and diversity situations.Solving the detail problem in each step could keep the original meaning of designer....

  18. Integrated circuit design using design automation

    International Nuclear Information System (INIS)

    Gwyn, C.W.

    1976-09-01

    Although the use of computer aids to develop integrated circuits is relatively new at Sandia, the program has been very successful. The results have verified the utility of the in-house CAD design capability. Custom IC's have been developed in much shorter times than available through semiconductor device manufacturers. In addition, security problems were minimized and a saving was realized in circuit cost. The custom CMOS IC's were designed at less than half the cost of designing with conventional techniques. In addition to the computer aided design, the prototype fabrication and testing capability provided by the semiconductor development laboratory and microelectronics computer network allows the circuits to be fabricated and evaluated before the designs are transferred to the commercial semiconductor manufacturers for production. The Sandia design and prototype fabrication facilities provide the capability of complete custom integrated circuit development entirely within the ERDA laboratories

  19. Structured Analog CMOS Design

    CERN Document Server

    Stefanovic, Danica

    2008-01-01

    Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The proposed transistor-level design procedure is based on the EKV modeling approach and relies on the device inversion level as a fundament

  20. Design for Play

    DEFF Research Database (Denmark)

    Feder, Karen

    2017-01-01

    Abstract The purpose of the new Design for Play initiative is to inspire and educate designers to design for the future of play. To create “play ambassadors” equipped with excellent tools, methods, approaches and mind-sets to design for the playful human being in an ever-changing world. To teach...... and inspire children to grow up to be creative designers of their own life and the world around them. The Design for Play research team will study the interplay between people, processes and products in design for play and support the development of playful designers, playful solutions and playful experiences...

  1. Analyses for designing objects in mechanical design

    International Nuclear Information System (INIS)

    Nakajima, Norihiro; Miyamura, Hiroko N.; Kawakami, Yoshiaki; Kawamura, Takuma

    2015-01-01

    Defining factors to induce the damage that can be assumed in the mechanical structures, it is a loaded work to analyze a damage possibility point derived by the assumption phenomenon that can occur is, but it is the important designing process. Taking factors caused by the earthquake as an example, and simulating the phenomenon that can be assumed, the computational result was analyzed with information visualization. A damage possibility point by analyzing the result mathematically. The illustration of analytical results may give points to designers as means for a designer to recognize a damage possibility point from the sensitivity of the designer. (author)

  2. Performative Urban Design

    DEFF Research Database (Denmark)

    Samson, Kristine

    2011-01-01

    visitors and participants to engage and interact with the city. Inspired by Lefebvre statement that "the most beautiful cities were those where festivals were not planned in advance” (Lefebvre 1987:36), I will discuss how urban designers can design engaging spaces, where the potentials of the city can...... unfold. Is it, for instance, the formal aesthetics of the design or rather the socio-cultural codes of the existing urban space that engage people? The paper engages in three urban performance designs: 1) The 10th Avenue Plaza at the Highline in New York 2) The temporary installations at Boble Plads......Urban design has come to mean many things. From the architectural masterplans to the informal urban design in temporary spaces and event designs. The paper will focus on urban designs engaging urban designs. Engaging urban design can broadly be understood as temporary design installations inviting...

  3. Solar Design Workbook

    Energy Technology Data Exchange (ETDEWEB)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  4. Caffeic Acid-PLGA Conjugate to Design Protein Drug Delivery Systems Stable to Irradiation

    Directory of Open Access Journals (Sweden)

    Francesca Selmin

    2015-01-01

    Full Text Available This work reports the feasibility of caffeic acid grafted PLGA (g-CA-PLGA to design biodegradable sterile microspheres for the delivery of proteins. Ovalbumin (OVA was selected as model compound because of its sensitiveness of γ-radiation. The adopted grafting procedure allowed us to obtain a material with good free radical scavenging properties, without a significant modification of Mw and Tg of the starting PLGA (Mw PLGA = 26.3 ± 1.3 kDa vs. Mw g-CA-PLGA = 22.8 ± 0.7 kDa; Tg PLGA = 47.7 ± 0.8 °C vs. Tg g-CA-PLGA = 47.4 ± 0.2 °C. By using a W1/O/W2 technique, g-CA-PLGA improved the encapsulation efficiency (EE, suggesting that the presence of caffeic residues improved the compatibility between components (EEPLGA = 35.0% ± 0.7% vs. EEg-CA-PLGA = 95.6% ± 2.7%. Microspheres particle size distribution ranged from 15 to 50 µm. The zeta-potential values of placebo and loaded microspheres were −25 mV and −15 mV, respectively. The irradiation of g-CA-PLGA at the dose of 25 kGy caused a less than 1% variation of Mw and the degradation patterns of the non-irradiated and irradiated microspheres were superimposable. The OVA content in g-CA-PLGA microspheres decreased to a lower extent with respect to PLGA microspheres. These results suggest that g-CA-PLGA is a promising biodegradable material to microencapsulate biological drugs.

  5. OPTIMIZATION OF OPTIMIZATION OF DESIGN FORMULA DESIGN ...

    African Journals Online (AJOL)

    User

    Keywords: reinforced concrete slabs, flexure, m. 1. Introduction ntroduction ntroduction. An evaluation of the flexural resistance of reinforced concrete solid slabs with the optimu weight required for structural safety a economy and as stated in design codes. 5] is presented. It is a well-known fact by many design enginee.

  6. Reframing Design: Design Thinking and Mediation Theory

    NARCIS (Netherlands)

    Verbeek, Peter P.C.C.

    2015-01-01

    Design Thinking’ has proven to be a fruitful way to deal with societal problems and challenges. But what does it in fact mean to approach problems as design problems? What does it imply for our ways to understand societal challenges, and for the ways in which we address them? In order to answer

  7. Design Thinking Pedagogy: The Educational Design Ladder

    Science.gov (United States)

    Wrigley, Cara; Straker, Kara

    2017-01-01

    As global industries change and technology advances, traditional education systems might no longer be able to supply companies with graduates who possess an appropriate mix of skills and experience. The recent increased interest in Design Thinking as an approach to innovation has resulted in its adoption by non-design-trained professionals. This…

  8. Ethical Design Fiction

    DEFF Research Database (Denmark)

    Jensen, Thessa; Vistisen, Peter

    2017-01-01

    In this paper we examine how ethical challenges can be approached in and through design fiction. To do so, we develop a new framework for analysis as well as creation of design fictions. Our main focus will be on design fiction within a strategical setting, connecting the notion of design fiction...

  9. Empirical research through design

    NARCIS (Netherlands)

    Keyson, D.V.; Bruns, M.

    2009-01-01

    This paper describes the empirical research through design method (ERDM), which differs from current approaches to research through design by enforcing the need for the designer, after a series of pilot prototype based studies, to a-priori develop a number of testable interaction design hypothesis

  10. Delimiting Inclusive Design

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    This paper was written as an answer to the question raised by my PhD dissertation on accessibility through user-centred and Inclusive Design (ID) methods: can Inclusive Design be delimited? The literature on Inclusive Design deals almost entrirely with consumer product design and assistive...

  11. Design, Desire, and Difference

    Science.gov (United States)

    Leander, Kevin M.; Boldt, Gail

    2018-01-01

    In response to the rise in popularity of concepts of "design" in education research, pedagogy, and curriculum design, in this article we consider how the New London Group conceived of the role of student design practices as an outcome of pedagogy, as well as the parallel role of design in teaching practices. In this descriptive analysis,…

  12. Designing Healthcare Solutions

    Directory of Open Access Journals (Sweden)

    Devorah E. Klein

    2009-11-01

    Full Text Available Innovation is generated when designers collaborate with scientists and clinicians. Who are designers? Professionals trained to uncover people’s spoken and unspoken needs (human factors researchers, to generate tangible products and services that address these needs in new and better ways (industrial and graphic designers, and to ensure that the design intent is preserved in the final manufactured form (engineers.

  13. Analysis of Design Documentation

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp

    1998-01-01

    In design practice a process where a satisfactory solution is created within limited resources is required. However, since the design process is not well understood, research into how engineering designers actually solve design problems is needed. As a contribution to that end a research project...

  14. Design as Gesamtkunstwerk

    DEFF Research Database (Denmark)

    Munch, Anders V.

    Three texts on the historical development of ideas of total design: "The Art of Transgression" on contemporary projects between art, design and architecture; "Design as Gesamtkunstwerk" on the early modern total designs from Morris to Gropius (but mirrored in Panton) & "Throughout any Scale...

  15. Instant responsive web design

    CERN Document Server

    Simmons, Cory

    2013-01-01

    A step-by-step tutorial approach which will teach the readers what responsive web design is and how it is used in designing a responsive web page.If you are a web-designer looking to expand your skill set by learning the quickly growing industry standard of responsive web design, this book is ideal for you. Knowledge of CSS is assumed.

  16. DOE handbook: Design considerations

    International Nuclear Information System (INIS)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

  17. CBETA Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Hoffstaetter, G. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trbojevic, D. [Brookhaven National Lab. (BNL), Upton, NY (United States); Mayes, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-06-08

    This Design Report describes the baseline design of the Cornell-BNL ERL Test Accelerator, as it exists on the date of its publication in June 2017. The Design Report will not change frequently in the future. In contrast, the parameter sheets that summarize the CBETA design will respond as quickly and as thoroughly as necessary to maintain con guration control.

  18. CBETA Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Hoffstaetter, G. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trbojevic, D. [Brookhaven National Lab. (BNL), Upton, NY (United States); Mayes, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-06-08

    This Design Report describes the baseline design of the Cornell-BNL ERL Test Accelerator, as it exists on the date of its publication in June 2017. The Design Report will not change frequently in the future. In contrast, the parameter sheets that summarize the CBETA design will respond as quickly and as thoroughly as necessary to maintain configuration control.

  19. Early Building Design

    DEFF Research Database (Denmark)

    Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

    2017-01-01

    Highlights •Development of a design methodology that can handle the vast design space in early building design. •A global design space is modelled from extensive Monte Carlo simulations. •Sensitivity analysis methods applied to guide decision-makers. •Interactive visualizations help the multi-act...

  20. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  1. Design of canals

    CERN Document Server

    Swamee, P K

    2015-01-01

    The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

  2. Design and Iconic Brands

    Directory of Open Access Journals (Sweden)

    2015-11-01

    Full Text Available The VW Beetle, Apple, Porsche … many iconic brands have reached their status with groundbreaking designs. But what makes these designs so special? And is it really the design factor that accounts for the overall success of a brand? Dr. Walter de Silva shares with us his thoughts on iconic designs, the design process and the role of design in branding. Open your heart and mind to his extensive experience in developing designs for Volkswagen, Audi and other brands of the Volkswagen Group

  3. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    Kwon, Yeong Guk

    1996-09-01

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  4. Organizing design work

    DEFF Research Database (Denmark)

    Scheuer, John Damm

    2016-01-01

    The aim of this paper is to demonstrate the importance of the kind of understanding of organizing that is implied by design theories for project managers' understanding and organizing of design work. Five theories and their organizing consequences for project managers organizing of design work...... are analyzed. The paper contributes to design research and organization studies by putting the organizing of design projects on the research agenda. It also contributes by demonstrating the importance of being aware of the ontological and epistemological assumptions and organizing consequences of different...... design theories. The selected theories of design thus represent different views on what design is, address different design areas and are based on different ontological and epistemological assumptions that influence their views on how design processes should be organized....

  5. Designing For Democracy

    DEFF Research Database (Denmark)

    Knutz, Eva; Markussen, Thomas; Mårbjerg Thomsen, Signe

    2014-01-01

    there are already a number of approaches available which in one way or the other address the relationship between design, democracy and power. We provide an account of participatory design, adversarial design and design activism thereby pointing towards design?s potential for re-distributing power and authority......n this paper we focus on ?patient-democracy? and ?shared decision-making? seen from the perspective of design practice and design research. In the research on democracy in healthcare it is rarely questioned what forms of democracy underlies these concepts. We have examined three different theories...... of democracy and the democratic practices that belong to each of these. For designers working to increase patient democracy it is of vital importance to be able to distinguish different structures underlying democratic practices and to work out methods for prototyping democracy. In design research...

  6. Conceptualizing Aesthetics in Design

    DEFF Research Database (Denmark)

    Folkmann, Mads Nygaard

    2018-01-01

    The aim of this chapter is to introduce and discuss aesthetics as an approach to understand how design frames experience. In doing so, the chapter combines two philosophical interests in design, design phenomenology and design aesthetics, in order to promote a framework for discussing the impact...... of aesthetic meaning construction on experience. First, the chapter raises the phenomenological question of the relationship between design and experience, specifically, how design conditions experience. Second, in looking at aesthetics in terms of a) the sensual appeal of design, b) design objects...... as aesthetic media that frame modes of understanding, and c) contextual factors, such as media, influencing what is regarded as aesthetic, it is the thesis of the chapter that a reflective concept of design aesthetics can be employed to differentiate between three different ways in which design frame our...

  7. Participatory workspace design

    DEFF Research Database (Denmark)

    Seim, Rikke; Broberg, Ole

    2010-01-01

    Ergonomics are rarely addressed directly in the design and re-design of workspaces in Denmark. Often architects, engineers and other actors design the workspaces on the basis of for example spatial, technological or finan-cial considerations, thereby making ergonomics a by-product of the design...... process. However, by introducing ergonomists in the role of ‘workspace de-signers’ early in the design process, ergonomic considerations as well as the involvement of employees, can be integrated in the design process. In this article we demonstrate the use of the workspace design approach in a case study...... where an industrial manufacturer is undergoing a major technological change: going from labour intensive manual work to a highly automated production. The workspace design team, which included the company’s OHS consultant, designed the intervention as a participatory design process by using visually...

  8. Reliable Design Versus Trust

    Science.gov (United States)

    Berg, Melanie; LaBel, Kenneth A.

    2016-01-01

    This presentation focuses on reliability and trust for the users portion of the FPGA design flow. It is assumed that the manufacturer prior to hand-off to the user tests FPGA internal components. The objective is to present the challenges of creating reliable and trusted designs. The following will be addressed: What makes a design vulnerable to functional flaws (reliability) or attackers (trust)? What are the challenges for verifying a reliable design versus a trusted design?

  9. Managing collaborative design

    OpenAIRE

    Sebastian, R.

    2007-01-01

    Collaborative design has been emerging in building projects everywhere. The more complex a building project becomes, the closer and more intensive collaboration between the design actors is required. This research focuses on collaborative design in the conceptual architecture design phase, especially during the elaboration of the masterplan and the development of the preliminary building designs. This research is descriptive and has two aims. First, it aims at describing the characteristics a...

  10. Video Design Games

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Christensen, Kasper Skov; Iversen, Ole Sejer

    We introduce Video Design Games to train educators in teaching design. The Video Design Game is a workshop format consisting of three rounds in which participants observe, reflect and generalize based on video snippets from their own practice. The paper reports on a Video Design Game workshop...... in which 25 educators as part of a digital fabrication and design program were able to critically reflect on their teaching practice....

  11. Designing Futures in Indonesia

    OpenAIRE

    Alexandra Crosby

    2016-01-01

    Design is a wide reaching and unruly idea, often associated with seamless global mobility, ubiquitous consumerism, elite urban tastes, and fast paced economic growth. But design is also increasingly understood to be operating at edges, as a necessary response to the ethical and political challenges of advanced global capitalism. Design is both the problem and the solution, and effects everything. As Tony Fry writes ‘Design–the designer and designed objects, images, systems and things–shapes t...

  12. Mechanizing Exploratory Game Design

    OpenAIRE

    Smith, Adam Marshall

    2012-01-01

    Game design is an art form that deals with inherently interactive artifacts. Game designers craft games (assembled from rule systems and content), but they really seek to manipulate play: the interaction between games and players. When developing new games that are similar to past games, a designer may rely on previous experience with related designs and relatively easy access to players familiar with conventional design choices. When exploratorily venturing into uncharted territory, uncoveri...

  13. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  14. Design professional activity analysis in design management

    Directory of Open Access Journals (Sweden)

    Claudia de Souza Libanio

    2013-08-01

    Full Text Available Design use perception, as an essential element for achieving competitive advantage, also suggests the need to manage the design activities in companies. However, a few is discussed about the activity of these design professionals who participate in this process, their roles, functions and competencies, including  their connections to a company and other involved sectors. This article aims to analyze, during the design management processes, the work relations of design professionals connected to organizations both internal and externally, in order to comprehend the structure and intervenient factors on the activity of these professionals, as well as the interactions with their main coworkers. The methodology was exploratory and qualitative, using in-depth interviews with three design professionals. Subsequently, the responses were analyzed allowing the comparison of these obtained data to the theoretical bases researched. Through this case study, it was possible to realize the aspects and the structure of the design professional activity, connected intern and externally to organizations, as well as its relations with the main coworkers.

  15. Digital Interior Design by Stailia Design Oy

    OpenAIRE

    Lindroos, Jaana

    2017-01-01

    The objective of the thesis work is to research and create a web based service in a field of interior design. With my project, I am hoping to find out whether this kind of web service in the field of interior design can work in general and that the process together with the actual order form on internet is smooth from both customer and company point of view. The company has interior design related services but none entirely executed on the web. The target is to create a totally new service/pr...

  16. Database modeling and design logical design

    CERN Document Server

    Teorey, Toby J; Nadeau, Tom; Jagadish, HV

    2011-01-01

    Database systems and database design technology have undergone significant evolution in recent years. The relational data model and relational database systems dominate business applications; in turn, they are extended by other technologies like data warehousing, OLAP, and data mining. How do you model and design your database application in consideration of new technology or new business needs? In the extensively revised fifth edition, you'll get clear explanations, lots of terrific examples and an illustrative case, and the really practical advice you have come to count on--with design rules

  17. Database modeling and design logical design

    CERN Document Server

    Teorey, Toby J; Nadeau, Tom; Jagadish, HV

    2005-01-01

    Database systems and database design technology have undergone significant evolution in recent years. The relational data model and relational database systems dominate business applications; in turn, they are extended by other technologies like data warehousing, OLAP, and data mining. How do you model and design your database application in consideration of new technology or new business needs? In the extensively revised fourth edition, you'll get clear explanations, lots of terrific examples and an illustrative case, and the really practical advice you have come to count on--with design rul

  18. Fast wake measurements with LiDAR at Risø test field

    DEFF Research Database (Denmark)

    Bingöl, Ferhat; Trujillo, J.J.; Mann, Jakob

    2008-01-01

    . Downstream wind speed can be quantified spatially in one and two dimensions. Data analysis allows us to identify the wake transversal position, thus enabling us to quantify the wake meandering as well as the instantaneous wake expansion expressed in a meandering frame of reference. The experimental results...

  19. Sihtrühmade mentaalsust tuleb äris ja reklaamis tunda / Mihhail Kremez

    Index Scriptorium Estoniae

    Kremez, Mihhail

    2005-01-01

    Autor väidab, et teisele rahvusele mõeldud reklaami looja peaks lisaks PR-i ja reklaami hariduse omamisele olema kas selle rahva esindaja, kaht keelt emakeele tasemel valdav inimene, võõrkeele filoloog või selle kultuuri teadlane. Vastasel juhul ei pruugi sõnum olla sihtrühmale arusaadav ja õigesti mõistetav

  20. Risø energy report 4. The future energy system - distributed production and use

    DEFF Research Database (Denmark)

    Larsen, Hans Hvidtfeldt; Sønderberg Petersen, Leif

    2005-01-01

    technologies or fuel cells. Furthermore the following developments are expected: -closer link between supply and end-use -closer link between the various energy carriers distributed through grids such aselectricity, heat, natural gas and maybe hydrogen in the future -increased energy trade across national...... and the distribution of energy through grids such as those used for natural gas, electricity, districtheating and hydrogen. The focus is on industrialised countries, but the report also deals with specific points relevant to developing countries, such as isolated energy systems. The transport sector is discussed only...

  1. Decommissioning of the nuclear facilities at Risø National Laboratory. Descriptions and cost assessment

    DEFF Research Database (Denmark)

    Lauridsen, K.

    2001-01-01

    and the costs incurred. Three decommissioning scenarios were considered with decay times of 10, 25 and 40 years for the DR 3 reactor. The assessments conclude, however, that there will not be much to gain by allowing forthe longer decay periods; some operations still will need to be performed remotely....... Furthermore, the report describes some of the legal and licensing framework for the decommissioning and gives an assessment of the amounts of radioactive waste to betransferred to a Danish repository. For a revision of the cost estimate for the decommissioning of the research Reactor DR 3 please consult...

  2. Ettevaatust! Sünnib Eesti esimene päris telenovela / Mart Niineste

    Index Scriptorium Estoniae

    Niineste, Mart, 1983-

    2008-01-01

    Produtsent Kristian Taska filmib Jüri tehnopargis Kalev Spordis näitamiseks Venezuela seebiseriaali Eesti oludele mugandust "Kalevi naised" (lavastaja Ingomar Vihman, osades Maria Avdjuško, Toomas Zupping, Jan Uuspõld, Britta Vahur, Ken Saan jt). Filmivõtetelt

  3. Wikipedia : sama täpne kui päris teatmeteos / Aivar Õepa

    Index Scriptorium Estoniae

    Õepa, Aivar, 1967-

    2005-01-01

    2001. aastal asutatud Wikipedia (www.wikipedia.org) on vabatahtlike tööl põhinev interneti-teatmeteos. Wikipediat ja Encyclopedia Britannicat võrrelnud teadlased leidsid, et veebientsüklopeedia ei jää täpsuses EB-le alla

  4. Kulikov : Vene kinnisvaraäris toob edu enesekindlus ning lai silmaring / Krister Paris

    Index Scriptorium Estoniae

    Paris, Krister, 1977-

    2004-01-01

    Vene kinnisvaraärimehest Jevgeni Kulikovist, kes on Eestis toimuval rahvusvahelisel konverentsil "Kinnisvara 2004" peaesineja. Lisad: Kompanii MIEL; Vene kinnisvaraturg; Grigori Kulikov - Vene hinnatuim

  5. THE RIS K OF EDUCATIONAL SINGULARITY RISE: TENDENCIES AND THE FEASIBLE CONSEQUENCES

    Directory of Open Access Journals (Sweden)

    Yu. V. Voronenko

    2013-05-01

    Full Text Available There are considered the peculiarities of transition of the system of education from industrial to postindustrial model (informational society. Expert conclusions about the risks of technological and informative singularity are analysed. The prevention problems of technological and informative singularity on the base of newest technologies development, in particular post-graduate medical education are discussed.

  6. ARCO-ÍRIS NO CAMPO: ETNOGRAFIA DA “HOMOSSEXUALIDADE” MASCULINA NO AMBIENTE RURAL

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Azevedo

    2015-08-01

    Full Text Available O ambiente rural caracteriza-se por uma região não urbanizada. É o campo em contraponto com a cidade. A zona rural sempre foi classificada como um ambiente repressor e conservador, já a cidade tem como características o anonimato e a liberdade. Na lógica que a heterossexualidade é normatizada em todos os ambientes, uma comunidade campal tem enraizada questões como o machismo e a heteronormatividade de forma mais intensa que o ambiente urbano, por conta de questões geográficas e de valores socioculturais. Contudo, existe uma alegação que em comunidades rurais há uma consumação de práticas sexuais entre adolescentes homens, ou seja, uma prática sexual gay durante a puberdade masculina. A pesquisa em tela busca comprovar a existência destas práticas “homossexuais”, bem como interpretar a dinâmica que as envolvem a fim de compreender como se performatiza a identidade social destes moços. Tendo por base a etnografia, foi realizada uma pesquisa de campo, nos moldes tradicionais da observação participante de cunho antropológico, durante três meses de intenso convívio social na comunidade camponesa Olhos Cristais (nome fictício do município de Baraúna/RN, em que se observou toda a conjuntura expressa através do cotidiano por diversos momentos e espaços de sociabilidade. Também foram realizadas conversas individuais com quatro rapazes. Os rapazes tinham de 19 a 23 anos de idade, e através da história oral fizeram todo um resgate do aspecto estudado, no que diz respeito à vivencia particular de cada um. De fato, as práticas sexuais e afetivas entre rapazes da zona rural existem e não estão concentradas apenas na adolescência, pois se expressam também até a fase adulta da vida, como foi perceptível. Pensar estas práticas é compreender um mundo de dupla face, onde o âmbito particular e o público assumem formas muitas vezes contrastantes, demonstrando um poder influente e coercitivo da sociedade no processo de construção performativa da identidade deles, em que os rapazes se moldam aos valores e costumes nativos a fim de obter uma convivência pacífica e longe de preconceitos, assumindo uma identidade às vezes contraditória, mas nunca deixando de usufruir dos variados prazeres da vida.

  7. Rain Sepp - kontorita juht ülemaailmses äris / Riina Kallas

    Index Scriptorium Estoniae

    Kallas, Riina

    2005-01-01

    Mobiiltelefonilogosid ning -helinaid müüva Jipii! portaali rahvusvahelise võrgu juht Rain Sepp ettevõtte arengust ja teenustest, tööst rahvusvahelise võrgu juhina, töö spetsiifilisusest, Eesti meeskonnast ning Läti, Leedu, Soome ja Londoni tiimis valitseva tööõhkkonna erinevustest. Vt. samas: 10% muusikarahast tuleb helinast; iTouch plc; www.jippii.ee

  8. Diagnostikakeskuse suurosaluse omandas veeäris tegutsenud Janek Ottis / Peeter Raidla

    Index Scriptorium Estoniae

    Raidla, Peeter, 1955-

    2004-01-01

    Tallinna Diagnostikakeskuse aktsiate müügitehingust, keskuses suurosaluse omandanud OÜ Diagnostic Family omaniku Janek Ottise ja keskuse nõukogu liikme Theo Raudsepaga seotud äridest. Vt. samas: Ottis meditsiiniga seotud

  9. Research to Advance the Development of River Information Services (RIS) Technologies

    Science.gov (United States)

    2016-12-01

    understaffed1. This bears the high risk that money , time and know-how is being lost and that the initial goals will not be fully achieved. 3.2 Applicability...Examples are the management of (virtual) AIS AtoN, the mo - nitoring of dredging operations as well as numbers and performance of usage of the

  10. The UNEP Risø Centre – multi-faceted sustainability

    DEFF Research Database (Denmark)

    Rasmussen, M.A.; Trærup, S.L.M.

    2006-01-01

    After many years of debate, researchers and politicians worldwide are now acknowledging the fact that the climate is changing as a result of human activities, especially emissions of greenhouse gasses from energy production.......After many years of debate, researchers and politicians worldwide are now acknowledging the fact that the climate is changing as a result of human activities, especially emissions of greenhouse gasses from energy production....

  11. Risø energy report 2. New and emerging bioenergy technologies

    DEFF Research Database (Denmark)

    2003-01-01

    of covering a considerable part of the world’s energy needs, increasing the security of energy supply through the use of indigenous resources, and improving localemployment and land use. To make these promises a reality, however, requires further R&D. This report provides a critical examination of modern...

  12. R.I.S.-125 {sup 125}I air monitor system

    Energy Technology Data Exchange (ETDEWEB)

    Belaish, I; Levinson, S; German, U; Pelled, O; Laichter, Y; Wangrovitz, U; Tirosh, D; Barak, D [Israel Atomic Energy Commission, Beersheba (Israel). Nuclear Research Center-Negev

    1996-12-01

    We have developed at NRCN a prototype of a continuous K-Ray air monitoring (CAM) system called `R.1.S.-125` (Radioactive Isotope Sampler for {sup 125}I). The system. was checked according to ANSI N42.17B -1989 (authors).

  13. Kass ja poisid kinnisvaraäris / Inno Tähismaa

    Index Scriptorium Estoniae

    Tähismaa, Inno, 1970-

    2004-01-01

    Supermodell Carmen Kass arendab koos kolme koolivennaga kinnisvaraäri Eestis, Lätis ja Leedus. Diagrammid: OÜ Kvaliteetvara majandusnäitajad; Portfelli jaotus. Lisad: Carmen Kassi tähelend; Carmen Kassi ärid Eestis

  14. Risø energy report 1. New and emerging technologies - options for the future

    DEFF Research Database (Denmark)

    Larsen, Hans Hvidtfeldt; Sønderberg Petersen, Leif

    2002-01-01

    National Laboratory. The global energy developments are presented based on the latestavailable information from authoritative sources like IEA, WEC, World Energy Assessment etc. Some of the major challenges are presented in terms of the changing energy markets in all regions, the focus on environmental...

  15. "Allakäigu" Adolf Hitler paistab päris inimese moodi / Andres Laasik

    Index Scriptorium Estoniae

    Laasik, Andres, 1960-2016

    2004-01-01

    Mängufilm, kus peategelaseks on Adolf Hitler - "Allakäik" ("Der Untergang") : stsenarist ja produtsent Bernd Eichinger : režissöör Oliver Hirschbiegel : Saksamaa 2004. Lisa "Pimedad Ööd tahavad Hitlerit"

  16. Võlgade sissenõudmine rahvusvahelises äris / Jaan Õmblus

    Index Scriptorium Estoniae

    Õmblus, Jaan, 1971-

    1996-01-01

    Võlgade sissenõudmisel enamlevinud meetodid: ähvardused, vastavalt spetsialiseerunud firmade teenused, vara arestimine, võlanõuete turustamine, juriidilise kompetentsuse näitamine, vahendaja kasutamine, seaduslikud sunnimeetmed, võlgade ümbervormistamine ja juhtimisvõtete kasutamine

  17. SANS-II at SINQ: Installation of the former Risø-SANS facility

    DEFF Research Database (Denmark)

    Strunz, P.; Mortensen, K.; Janssen, S.

    2004-01-01

    SANS-II facility at SINQ (Paul Scherrer Institute)-the reinstalled former Riso small-angle neutron scattering instrument-is presented. Its operational characteristics are listed. Approaches for precise determination of wavelength, detector dead time and attenuation factors are described as well. (C...

  18. Uuendused rõivaäris - muudki kui internet ja uued materjalid / Erik Aru

    Index Scriptorium Estoniae

    Aru, Erik

    2010-01-01

    Umberto Angeloni asutatud Umani kaubamärgiga ülikondi valmistatakse vaid viies mõõdus. Firmal puudub veebileht, kuid üldine suund on, et internetti läheb ka aina rohkem luksuskaupu. Ühest kiirema kasvuga rõivatööstuse firmast, Jaapani ettevõttest Fast Retailing. Uuest kangast, milles on traadita biosensorid

  19. Kõik ei ole päris nii, nagu paistab / Reet Varblane

    Index Scriptorium Estoniae

    Varblane, Reet, 1952-

    2007-01-01

    Hiina nüüdiskunsti näitus "Linnailmed / City Expressions" (koostööprojekt Guangzhou kunstiakadeemia muuseumiga) Tallinna Kunstihoones kuni 28. I ja aafrika nüüdiskunsti näitus "Aafrika. Taassegu / Africa. Remix" Stockholmi Moderna Museet'is kuni 14. I

  20. Hindsight and foresight - A view from the Risø Peninsula

    DEFF Research Database (Denmark)

    Busch, N.E.; Kristensen, L.

    2002-01-01

    Some 40 years of planetary boundary-layer research is briefly reviewed with Riso National Laboratory as the vantage point. The evolution of descriptions of atmospheric boundary layers including boundary-layer turbulence, its parameterization, interactions with larger scale phenomena, and engineer......Some 40 years of planetary boundary-layer research is briefly reviewed with Riso National Laboratory as the vantage point. The evolution of descriptions of atmospheric boundary layers including boundary-layer turbulence, its parameterization, interactions with larger scale phenomena...

  1. The design explorer project

    DEFF Research Database (Denmark)

    Pejtersen, Annelise Mark; Sonnenwald, Diane H.; Buur, Jacob

    1997-01-01

    the 'Design Explorer' research project whose goal is to specify requirements for an information system that will effectively help design team members from different domains and organizational cultures to locate and utilize diverse information sources and interact more effectively throughout the design process....... The project introduces a new approach to support of design; instead of design guidelines, support is given by creating a transparent information environment in which designers can navigate freely according to their individual preferences. The project is based on a framework that structures the dimensions......, or categories, of domain information which need to be available for a system or product designer/design team in order to determine the characteristics of the artefact, or object of design. These dimensions include information about the different work domains in which the product plays a role during its lifetime...

  2. The interactive design collaboratorium

    DEFF Research Database (Denmark)

    Bødker, Susanne; Petersen, Marianne Graves; Krogh, Peter Gall

    2001-01-01

    This paper reports on experimental process in which a prototype was developed of an interactive design collaboatorium, in cooperation with a group of usability designers. In a longterm research cooperation, this usability group has changed its work practice in order to work in the design...... collaboratorium. The design collaboratorium was developed to move usability design away from a lab towards an open physical and organizational space where designer, users and engineers meet and collaborate, or work alongside each other. The cooperation between researchers and the usability gruop has resulted...... in practical experimentation in projects and in design of an experimental design collaboratorium emploing electronic whiteboards, 3D design documentation, etc. This experimental prototype has been evaluated in cooperative workshops. We report on the results of this evaluation....

  3. Building theory through design

    DEFF Research Database (Denmark)

    Markussen, Thomas

    2017-01-01

    This chapter deals with a fundamental matter of concern in research through design: how can design work lead to the building of new theory? Controversy exists about the balance between theory and design work in research through design. While some researchers see theory production as the scientific...... hallmark of this type of research, others argue for design work being the primary achievement, with theory serving the auxiliary function of inspiring new designs. This paper demonstrates how design work and theory can be appreciated as two equally important outcomes of research through design. To set...... the scene, it starts out by briefly examining ideas on this issue presented in existing research literature. Hereafter, it introduces three basic forms in which design work can lead to theory that is referred to as extending theories, scaffolding theories and blending theories. Finally, it is discussed how...

  4. Understanding representations in design

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1998-01-01

    Representing computer applications and their use is an important aspect of design. In various ways, designers need to externalize design proposals and present them to other designers, users, or managers. This article deals with understanding design representations and the work they do in design....... The article is based on a series of theoretical concepts coming out of studies of scientific and other work practices and on practical experiences from design of computer applications. The article presents alternatives to the ideas that design representations are mappings of present or future work situations...... and computer applications. It suggests that representations are primarily containers of ideas and that representation is situated at the same time as representations are crossing boundaries between various design and use activities. As such, representations should be carriers of their own contexts regarding...

  5. Radiological design guide

    International Nuclear Information System (INIS)

    Evans, R.A.

    1994-01-01

    The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design

  6. Can design science be used for design?

    DEFF Research Database (Denmark)

    Rose, Jeremy; Markfoged, Kim; Andersen, Jesper Lund

    2010-01-01

    software development projects. They studied the literature, chose appropriate starting theories, designed their own development processes, used them to build small mobile applications, documented their experiences and evaluated those experiences by writing research articles. A more experienced researcher...

  7. Parametric Design Strategies for Collaborative Urban Design

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Yıldırım, Miray Baş; Özkar, Mine

    2013-01-01

    to the collaboration between professionals, participation by different non-professional stakeholders, such as residents, local authorities, non-governmental organizations and investors, is another important component of collaborative urban design processes. The involvement of community in decision making process...... implications of planning and design decisions, unless they are presented with relatively detailed architectural models, whether physical or virtual. This however, typically presents steep demands in terms of time and resources. As a foundation for our work with parametric urban design lies the hypothesis...... to solve different scripting challenges. The paper is organized into an introduction, three main sections and closing section with conclusions and perspectives. The first section of the paper gives a theoretical discussion of the notion of collaborative design and the challenges of collaborative urban...

  8. The circuit designer's companion

    CERN Document Server

    Williams, Tim

    1991-01-01

    The Circuit Designer's Companion covers the theoretical aspects and practices in analogue and digital circuit design. Electronic circuit design involves designing a circuit that will fulfill its specified function and designing the same circuit so that every production model of it will fulfill its specified function, and no other undesired and unspecified function.This book is composed of nine chapters and starts with a review of the concept of grounding, wiring, and printed circuits. The subsequent chapters deal with the passive and active components of circuitry design. These topics are foll

  9. Handbook of optical design

    CERN Document Server

    Malacara-Hernández, Daniel

    2013-01-01

    Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

  10. Professional ASPNET Design Patterns

    CERN Document Server

    Millett, Scott

    2010-01-01

    Professional ASP.NET Design Patterns will show you how to implement design patterns in real ASP.NET applications by introducing you to the basic OOP skills needed to understand and interpret design patterns. A sample application used throughout the book is an enterprise level ASP.NET website with multi-tiered, SOA design techniques that can be applied to your future ASP.NET projects. Read about each design pattern in detail, including how to interpret the UML design, how to implement it in ASP.NET, its importance for ASP.NET development, and how it's integrated into the final project.

  11. Introduction to combinatorial designs

    CERN Document Server

    Wallis, WD

    2007-01-01

    Combinatorial theory is one of the fastest growing areas of modern mathematics. Focusing on a major part of this subject, Introduction to Combinatorial Designs, Second Edition provides a solid foundation in the classical areas of design theory as well as in more contemporary designs based on applications in a variety of fields. After an overview of basic concepts, the text introduces balanced designs and finite geometries. The author then delves into balanced incomplete block designs, covering difference methods, residual and derived designs, and resolvability. Following a chapter on the e

  12. Optimal Hospital Layout Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine

    foundation. The basis of the present study lies in solving the architectural design problem in order to respond to functionalities and performances. The emphasis is the practical applicability for architects, engineers and hospital planners for assuring usability and a holistic approach of functionalities...... a correlation matrix. The correlation factor defines the framework for conceptual design, whereby the design considers functionalities and their requirements and preferences. It facilitates implementation of evidence-based design as it is prepared for ongoing update and it is based on actual data. Hence......, this contribution is a model for hospital design, where design derives as a response to the defined variables, requirements and preferences....

  13. REDOing Design Education

    DEFF Research Database (Denmark)

    Morelli, Nicola; Götzen, Amalia De

    2017-01-01

    that are being developed in design education and research. The value in use, the infrastructuring and the governance levels are explained with the specific tools and approaches required according to the specific aim of the design activity: that is, whether it is about understanding, transforming or communicating......Service design education is still young and it is still interpreted in many different ways, according to the design programs where it usually plays a minor role. Very few education schemes provide a complete curriculum on service design, facing the challenge of equipping a designer who will want...

  14. Microwave circulator design

    CERN Document Server

    Linkhart, Douglas K

    2014-01-01

    Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

  15. Investigation of the effect of different parameters on the phase inversion temperature O/W nanoemulsions

    Directory of Open Access Journals (Sweden)

    D. Kaviani

    2016-01-01

    Full Text Available Objective(s: Nanoemulsions are a kind of emulsions that can be transparent, translucent (size range 50-200 nm or “milky” (up to 500 nm. Nanoemulsions are adequatly effective for transfer of active component through skin which facilitate the entrance of the active component . The transparent nature of the system and lack of the thickener and fluidity are among advantages of nanoemulsion. Materials and Methods: In this study, a nanoemulsion of lemon oil in water was prepared by the phase inversion temperature (PIT emulsification method in which the tween 40 was used as surfactant. The effect of concentration of NaCl in aqueous phase, pH and weight percent of surfactant and aqueous on the PIT and droplet size were investigated. Results: The results showed that with increasing of concentration of NaCl from 0.05 M to 1 M, PIT decrease from 72 to 50. The average droplet sizes, for 0.1, 0.5 and 1 M of NaCl in 25 ºC are 497.3, 308.1 and 189.9 nm, respectively and the polydispersity indexes are 0.348, 0.334 and 0.307, respectively. Conclusion: Considering the characteristics of nanoemulsions such as being transparent, endurance of solution and droplet size can provide suitable reaction environment for polymerization process used in making hygienic and medical materials.

  16. Exotic Vegetable Oils for Cosmetic O/W Nanoemulsions: In Vivo Evaluation

    OpenAIRE

    Tatiana A. Pereira; Carolina M. Guerreiro; Monica Maruno; Marcio Ferrari; Pedro Alves Rocha-Filho

    2016-01-01

    Oil-in-water nanoemulsions are stable systems with droplet sizes in the 20–200 nm range. The physicochemical properties of these systems may be influenced by the addition of additives. Thus, the influence of ethoxylated (EL) and acetylated lanolin (AL) addition on the droplet size, pH values, electrical conductivity and stability of nanoemulsions was investigated. Then, effect of nano-emulsions additives with EL (NE-EL) or AL (NE-AL) in hydration, oiliness and pH of the skin were evaluated. N...

  17. Exotic Vegetable Oils for Cosmetic O/W Nanoemulsions: In Vivo Evaluation.

    Science.gov (United States)

    Pereira, Tatiana A; Guerreiro, Carolina M; Maruno, Monica; Ferrari, Marcio; Rocha-Filho, Pedro Alves

    2016-02-24

    Oil-in-water nanoemulsions are stable systems with droplet sizes in the 20-200 nm range. The physicochemical properties of these systems may be influenced by the addition of additives. Thus, the influence of ethoxylated (EL) and acetylated lanolin (AL) addition on the droplet size, pH values, electrical conductivity and stability of nanoemulsions was investigated. Then, effect of nano-emulsions additives with EL (NE-EL) or AL (NE-AL) in hydration, oiliness and pH of the skin were evaluated. Nanoemulsion safety was evaluated through the observation of no undesirable effects after skin formulation application. Both additives caused changes in droplet size and electrical conductivity, but not in pH values. Nanoemulsions containing up to 6.0% ethoxylated lanolin and 2.0% acetylated lanolin remained stable after centrifugation tests. Higher concentrations of the additives made the nanoemulsions unstable. Stability tests showed that ethoxylated lanolin produced more stable nanoemulsions then acetylated lanolin and that the major instability phenomenon occurring in these systems is coalescence at elevated temperatures. Nanoemulsion-based lanolin derivatives increased skin hydration and oiliness and did not change cutaneous pH values. These formulations are non-toxic since they did not cause any irritation on the skin surface after nanoemulsion application, showing potential as carriers for pharmaceuticals and cosmetic applications.

  18. Exotic Vegetable Oils for Cosmetic O/W Nanoemulsions: In Vivo Evaluation

    Directory of Open Access Journals (Sweden)

    Tatiana A. Pereira

    2016-02-01

    Full Text Available Oil-in-water nanoemulsions are stable systems with droplet sizes in the 20–200 nm range. The physicochemical properties of these systems may be influenced by the addition of additives. Thus, the influence of ethoxylated (EL and acetylated lanolin (AL addition on the droplet size, pH values, electrical conductivity and stability of nanoemulsions was investigated. Then, effect of nano-emulsions additives with EL (NE-EL or AL (NE-AL in hydration, oiliness and pH of the skin were evaluated. Nanoemulsion safety was evaluated through the observation of no undesirable effects after skin formulation application. Both additives caused changes in droplet size and electrical conductivity, but not in pH values. Nanoemulsions containing up to 6.0% ethoxylated lanolin and 2.0% acetylated lanolin remained stable after centrifugation tests. Higher concentrations of the additives made the nanoemulsions unstable. Stability tests showed that ethoxylated lanolin produced more stable nanoemulsions then acetylated lanolin and that the major instability phenomenon occurring in these systems is coalescence at elevated temperatures. Nanoemulsion-based lanolin derivatives increased skin hydration and oiliness and did not change cutaneous pH values. These formulations are non-toxic since they did not cause any irritation on the skin surface after nanoemulsion application, showing potential as carriers for pharmaceuticals and cosmetic applications.

  19. Interrogation in Owé Yorùbá: A preliminary investigation | Medubi ...

    African Journals Online (AJOL)

    The Obaro is the paramount ruler of Kaba and these satellites. Okun derives its legitimacy from the specialmutual linguistic intelligibility amongst the various dialects that form it, distancing them from other Yorùbá dialect groups, and the denominatory cultural dynamics recognizable in the various peoples' living and beliefs.

  20. Alkyl caffeates as antioxidants in O/W emulsions: Impact of emulsifier type and endogenous tocopherols

    DEFF Research Database (Denmark)

    Sørensen, Ann-Dorit Moltke; Villeneuve, Pierre; Jacobsen, Charlotte

    2017-01-01

    , the aim was to evaluate the impact of emulsifiers (Citrem and Tween80) and presence of endogenous tocopherols on the efficacies of caffeic acid and caffeates (C1–C20) as antioxidants in emulsions. Lipid oxidation was evaluated during storage and partitioning of caffeic acid and caffeates was estimated...... by measuring their concentrations in the aqueous phase. Partitioning of caffeic acid and caffeates was influenced by emulsifier type and the presence of endogenous tocopherols. Caffeic acid was the most efficient antioxidant in Citrem and Tween stabilized emulsions in the presence of endogenous tocopherol....... In contrast, for Tween stabilized emulsions, caffeic acid acted as a prooxidant and the evaluated caffeates acted as strong antioxidants in the absence of endogenous tocopherol. Thus, when endogenous tocopherol was present lipophilization of caffeic acid did not increase its efficacy as an antioxidant...