The Analysis of Motion Dynamics and Resistance of the Multipurpose Boat Operating in Shallow Water

OpenAIRE

Jan Kulczyk; Tomasz Gornicz

2014-01-01

Polish market of small boats has been developed very dynamically in recent years. Market competition forces the shipyards to build new more efficient hull forms and to cut the cost of production as well. This is why modern computer simulation programs are used more often by naval architects. Another trend is to design more universal ships that may be used by larger number of diversified customers. This paper presents project proposal of multipurpose boat hull form. The boat was design to f...

Navigation System Design and State Estimation for a Small Rigid Hull Inflatable Boat (RHIB)

Science.gov (United States)

2014-09-01

modulation to allow for variable motor speeds. The rudder controller utilizes a tuned proportional-integral-derivative controller with set...relative to the inertial frame, resolved along the body axes is defined as [ , , ]b Tbi p q r  , where p is the angular roll rate about 36 the x...parameter-estimation,” in 2001 IEEE International Conference on Acoustics, Speech , and Signal Processing, Salt Lake City, UT, 2001. [15] S. Julier

Convex Hull Aided Registration Method (CHARM).

Science.gov (United States)

Fan, Jingfan; Yang, Jian; Zhao, Yitian; Ai, Danni; Liu, Yonghuai; Wang, Ge; Wang, Yongtian

2017-09-01

Non-rigid registration finds many applications such as photogrammetry, motion tracking, model retrieval, and object recognition. In this paper we propose a novel convex hull aided registration method (CHARM) to match two point sets subject to a non-rigid transformation. First, two convex hulls are extracted from the source and target respectively. Then, all points of the point sets are projected onto the reference plane through each triangular facet of the hulls. From these projections, invariant features are extracted and matched optimally. The matched feature point pairs are mapped back onto the triangular facets of the convex hulls to remove outliers that are outside any relevant triangular facet. The rigid transformation from the source to the target is robustly estimated by the random sample consensus (RANSAC) scheme through minimizing the distance between the matched feature point pairs. Finally, these feature points are utilized as the control points to achieve non-rigid deformation in the form of thin-plate spline of the entire source point set towards the target one. The experimental results based on both synthetic and real data show that the proposed algorithm outperforms several state-of-the-art ones with respect to sampling, rotational angle, and data noise. In addition, the proposed CHARM algorithm also shows higher computational efficiency compared to these methods.

Air-Inflated Fabric Structures

National Research Council Canada - National Science Library

Cavallaro, Paul V; Sadegh, Ali M

2006-01-01

.... Examples include air ships, weather balloons, inflatable antennas and radomes, temporary shelters, pneumatic muscles and actuators, inflatable boats, temporary bridging, and energy absorbers such as automotive air bags...

Estimation of performance of a high-speed boat by using the Rankine source method; Kosokutei no rankinsosuho ni yoru seino suitei ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Eguchi, T [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

1997-10-01

This paper describes estimation of performance of a high-speed boat by using the Rankine source method. An orthogonal coordinate system is considered, which uses the center of a hull as the zero point, and is made dimensionless by using the hull length. The catamaran boat or the single hull boat being the subject of the discussion is supposed to have a transom stern, and to be sailing at a constant speed in the -X direction. A governing equation and a border condition were formulated using disturbance speed potential and X-direction speed differentiation. An inverse specular image was employed as a specular image system upon considering attitude change in the high-speed boat. As to the division of hull surface, the portions protruded above the static water surface were cut off from among the panel data of boat CAD. Considering a high speed condition in which the water surface is completely separated at the transom section, the water level at the transom section was supposed to be at the same height as at the rear end of the hull. Blow-out intensity at the water surface was derived in such a way that a CAD panel of the rear end of the hull is searched and wave height agrees with the height of the transom in the Z direction. A resistance curve may be obtained easily by using a personal computer. 4 refs., 8 figs.

Effects of Geometry on the Steady Performance of Planing Hulls

DEFF Research Database (Denmark)

Wagner, M. K.; Andersen, Poul

2003-01-01

A vortex-lattice method is applied to planing hull forms. The geometry of the jet surfaces next to the wetted hull is estimated on the basis of the hull geometry while its sidewise extent has been found numerically applying a non-linear free-surface pressure condition in the jet region. The method...... is applied to practical hull forms with chines spray rails and with varying deadrise over the length of the boat. The deadrise variation has a large influence on lift and drag. For a design situation, where the total lift and centre of effort is given, the influence on the total drag is less due to change...

Design of Fishing Boat for Pelabuhanratu Fishermen as One of Effort to Increase Production of Capture Fisheries

Science.gov (United States)

Nur, Iswadi; Joko Suranto, Purwo

2018-02-01

Design of fishing boat for Pelabuhanratu fisherman as one of effort to increase production of capture fisheries. The fishing boat should be proper for the characteristic of its service area, as; capacity of fishing boat up to 60 GT, the fishing boat has minimum 6 fish holds and location of fish hold in the middle body, the fishing boat hull has the bilge keel plate, and the material of hull fishing boat to be made of wooden, steel, aluminium, or fiberglass. Main dimesion of fishing boat is Length Over All = 25.436 m, Breadth = 4.55 m, Draft = 1.6 m, Speed = 12.5 knots. The research had been known every thing that will be supporting the production of capture fisheries like ; amount of fish production = 25.030 ton per day, the fishing port capacity approximately 268.957GT per day, the area of fishing port industry had not completed, therefore all data research result less than standard of Oceanic Fising Port. So Pelabuhanratu National Fishing Port can not be changed to Oceanic Fishing Port.

46 CFR 199.175 - Survival craft and rescue boat equipment.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat equipment. 199.175....175 Survival craft and rescue boat equipment. (a) All lifeboat and rescue boat equipment— (1) Must be... craft or rescue boat; or (iii) Overload the launching appliance. (b) Each lifeboat, rigid liferaft, and...

Technology & Mechanics Overview of Air-Inflated Fabric Structures

National Research Council Canada - National Science Library

Cavallaro, Paul V

2006-01-01

.... Examples include air ships, weather balloons, inflatable radomes, shelters, pneumatic muscles, inflatable boats, bridging, and energy absorbers such as automotive air bags and landing cushions for space vehicles...

Boat Hull Blisters: Repair Techniques and Long Term Effects on Hull Degradation

Science.gov (United States)

1988-08-01

X 12’ waxed glass mold. Orthophthalic Acid/ Neopentyl glycol based gel coat was used in the R, RA, RA and RD series. Isophthalic acid/keopentyl glycol ...a boat manufacturer. The gel coat was isophthalic acid and / neopentyl glycol based. The laminating resin used was isophthalic acid/propylene glycol ...something present in the resin itself. We have reported blistering vhen sorbitol is added to the resin. Pritchard has reported on the role of excess glycol

Morphing hull implementation for unmanned underwater vehicles

International Nuclear Information System (INIS)

Miller, Timothy F; Gandhi, Farhan; Rufino, Russell J

2013-01-01

There has been much interest and work in the area of morphing aircraft since the 1980s. Morphing could also potentially benefit unmanned underwater vehicles (UUVs). The current paper envisions a UUV with an interior pressure hull and a variable diameter outer flexible hull with fuel stored in the annulus between, and presents a mechanism to realize diameter change of the outer hull. The outer hull diameter of UUVs designed for very long endurance/range could be progressively reduced as fuel was consumed, thereby reducing drag and further increasing endurance and range capability. Diameter morphing could also be advantageous for compact storage of UUVs. A prototype is fabricated to represent an axial section of such a morphing diameter UUV. Diameter change is achieved using eight morphing trusses arranged equidistant around the circumference of the representative interior rigid hull. Each morphing truss has a lower rail (attached to the rigid hull) and an upper rail with V-linkages between, at either ends of the rail. Horizontal motion of the feet of the V-linkages (sliding in the lower rail) results in vertical motion of the upper rail which in turn produces diameter change of the outer hull. For the prototype built and tested, a 63% increase in outer diameter from 12.75″ to 20.75″ was achieved. The introduction of a stretched latex representative flexible skin around the outer rails increased actuation force requirement and led to a propensity for the wheel-in-track sliders in the morphing truss to bind. It is anticipated that this could be overcome with higher precision manufacturing. In addition to symmetric actuation of the morphing trusses resulting in diameter change, the paper also shows that with asymmetric actuation the hull cross-section shape can be changed (for example, from a circular section for underwater operation to a V-section for surface operations). (paper)

Morphing hull implementation for unmanned underwater vehicles

Science.gov (United States)

Miller, Timothy F.; Gandhi, Farhan; Rufino, Russell J.

2013-11-01

There has been much interest and work in the area of morphing aircraft since the 1980s. Morphing could also potentially benefit unmanned underwater vehicles (UUVs). The current paper envisions a UUV with an interior pressure hull and a variable diameter outer flexible hull with fuel stored in the annulus between, and presents a mechanism to realize diameter change of the outer hull. The outer hull diameter of UUVs designed for very long endurance/range could be progressively reduced as fuel was consumed, thereby reducing drag and further increasing endurance and range capability. Diameter morphing could also be advantageous for compact storage of UUVs. A prototype is fabricated to represent an axial section of such a morphing diameter UUV. Diameter change is achieved using eight morphing trusses arranged equidistant around the circumference of the representative interior rigid hull. Each morphing truss has a lower rail (attached to the rigid hull) and an upper rail with V-linkages between, at either ends of the rail. Horizontal motion of the feet of the V-linkages (sliding in the lower rail) results in vertical motion of the upper rail which in turn produces diameter change of the outer hull. For the prototype built and tested, a 63% increase in outer diameter from 12.75″ to 20.75″ was achieved. The introduction of a stretched latex representative flexible skin around the outer rails increased actuation force requirement and led to a propensity for the wheel-in-track sliders in the morphing truss to bind. It is anticipated that this could be overcome with higher precision manufacturing. In addition to symmetric actuation of the morphing trusses resulting in diameter change, the paper also shows that with asymmetric actuation the hull cross-section shape can be changed (for example, from a circular section for underwater operation to a V-section for surface operations).

News/High speed oil defense boat

Energy Technology Data Exchange (ETDEWEB)

1978-01-01

An oil defense boat that can travel at 30 knots to the scene of a spill and surround the polluted area or protect a nearby beach or harbor, with a 200 m floating plastic barrier within 20 minutes, has been developed by Vator Oy of Helsinki in association with the Finnish Board of Navigation. The Vator 18T boat, which can carry a crew of three or four, has a trimaran glass reinforced plastic hull. The floating plastic barrier (Nokia SUP Spillbooms) is produced by the Oy Nokia A.B., Cable Works Division of Helsinki and is made of a PVC-coated fabric enclosing floats of polyethylene foam and either chain ballast or iron sinkers.

Macroalgal Introductions by Hull Fouling on Recreational Vessels: Seaweeds and Sailors

Science.gov (United States)

Mineur, Frédéric; Johnson, Mark P.; Maggs, Christine A.

2008-10-01

Macroalgal invasions in coastal areas have been a growing concern during the past decade. The present study aimed to assess the role of hull fouling on recreational yachts as a vector for macroalgal introductions. Questionnaire and hull surveys were carried out in marinas in France and Spain. The questionnaires revealed that the majority of yacht owners are aware of seaweed introductions, usually undertake short range journeys, dry dock their boat at least once a year, and use antifouling paints. The hull survey showed that many in-service yachts were completely free of macroalgae. When present, fouling assemblages consisted mainly of one to two macroalgal species. The most commonly found species was the tolerant green seaweed Ulva flexuosa. Most of the other species found are also cosmopolitan and opportunistic. A few nonnative and potentially invasive Ceramiales (Rhodophyta) were found occasionally on in-service yachts. On the basis of the information gathered during interviews of yacht owners in the surveyed area, these occurrences are likely to be uncommon. However they can pose a significant risk of primary or secondary introductions of alien macroalgal species, especially in the light of the increase in yachting activities. With large numbers of recreational yachts and relatively rare occurrences of nonnative species on hulls, comprehensive screening programs do not seem justified or practical. The risks of transferring nonnative species may, however, be minimized by encouraging the behaviors that prevent fouling on hulls and by taking action against neglected boats before they can act as vectors.

Inflation is Always and Everywhere an Interest-Rate Phenomenon

OpenAIRE

Belanger, Gilles

2016-01-01

Following an earlier paper, I investigate an economy where nominal interest rates are rigid, but aggregate prices are not. Though the title exaggerates, interest rates rigidity does account for an uncanny number of stylized facts about inflation. This paper shows that previously shown results are robust to changes in the specification of interest rate rigidity. Results investigated include: (1) the procyclicality of inflation, (2) inflation control through interest rate manipulation,(3) the ...

The Analysis of Motion Dynamics and Resistance of the Multipurpose Boat Operating in Shallow Water

Directory of Open Access Journals (Sweden)

Jan Kulczyk

2014-09-01

Full Text Available Polish market of small boats has been developed very dynamically in recent years. Market competition forces the shipyards to build new more efficient hull forms and to cut the cost of production as well. This is why modern computer simulation programs are used more often by naval architects. Another trend is to design more universal ships that may be used by larger number of diversified customers. This paper presents project proposal of multipurpose boat hull form. The boat was design to fulfil the requirements imposed by public services like water police, fire brigades, and border guards. It is supposed to be operated on unexplored floodplains and other type shallow waters. The analysis of boat’s motion was based on computer simulations. The resistance curve was evaluated with two methods: comparison study of model test results of similar ships and CFD methods. The results obtained from Ansys Fluent and FINE/Marine systems were compared in this paper. It was shown that taking into consideration dynamic trim and sinkage has a significant impact on free surface capture and resistance values.

Finite-volume simulation of the flow around a sailing boat with unsteady motion; Hiteijo undo wo okonau hansotei no yuten taisekiho ni yoru simulation

Energy Technology Data Exchange (ETDEWEB)

Akimoto, H. [Tottori University, Tottori (Japan). Faculty of Engineering

1997-06-01

A new simulation code WISDAM-7 is developed to simulate performance of a sailing boat moving three-dimensionally on a free surface. It adequately predicts forces acting on each element, such as hull, sail, keel and rudder, and use them as the inputs to solve equations of hull motion of 6 freedoms. Its major features are the grid system fit for both free and hull surfaces, generation of discrete space by the finite-volume method, handling of the velocity vectors directly as those in the Descartes system, velocity and pressure placed at the cell center, use of the moving grid system for free and object surfaces, and use of equations of hull motion of 6 freedoms. It is confirmed by comparing simulated motion of an IACC class yacht with the observed surface pressure distributions in the test tank that the new method satisfies the basic requirements for simulation of sailing boat motion and expands the applicable range of CFD to general motion conditions. 8 refs., 18 figs.

Wave-induced Ship Hull Vibrations in Stochastic Seaways

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher; Dogliani, M.

1996-01-01

A theoretical Study is undertaken on the determination of wave-induced loads in flexible ship hulls. The calculations are performed within the framework of a non-linear, quadratic strip theory formulated in the frequency domain. Included are non-linear effects due to changes in added mass......, hydrodynamic damping and water line breadth with sectional immersion in waves. The study is limited to continuous excitations from the waves and thus transient so-called whipping vibrations due to slamming loads are not considered.Because of the non-linearities the ship hull responses become non...... to the large separation between dominating wave frequencies and the lowest two-node frequency of the hull beam. Both extreme value predictions and fatigue damage are considered.For a fast container ship the rigid body and two-node (springing) vertical wave-induced bending moments amidship are calculated...

On the wave induced responses for a high-speed hydrofoil catamaran. Part 2. Cabin connected to hull by spring and response to vibration; Suichuyokutsuki kosoku sodotei no harochu oto ni tsuite. 2. Dokuritsu kozogata cabin to yodo oto

Energy Technology Data Exchange (ETDEWEB)

Nobukawa, H; Kitamura, M; Kawamura, T [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

1996-04-10

A high-speed hydrofoil catamaran under development has such a structure that an independent cabin is mounted on catamaran hulls, the cabin is connected with the hulls by using four soft springs, and hydrofoils are attached to the front and rear of the cabin. The structural design conception was as follows: the self-weight of the cabin is supported by lifting power of the hydrofoils while the boat is cruising; longitudinal motions of the catamaran hulls are absorbed by soft spring struts to make the motions more difficult to be transmitted into the cabin; and vibration excited by engines rotating at high speeds, attached to rear of the catamaran hulls, is not transmitted directly to the cabin structurally. A towing experiment was carried out by using divided models of about 1/10 scale in counter waves and regular waves to investigate their vibration response characteristics in waves. Furthermore, an experimental boat made of aluminum alloy with about 1/3 scale of the design boat was attached with composite structural struts made of springs and rubber parts to perform cruising experiments on an actual sea area. As a result, it was found that vibration excited by main engines in the catamaran hulls is transmitted very little to the cabin. 2 refs., 10 figs., 1 tab.

Alpha-Concave Hull, a Generalization of Convex Hull

OpenAIRE

Asaeedi, Saeed; Didehvar, Farzad; Mohades, Ali

2013-01-01

Bounding hull, such as convex hull, concave hull, alpha shapes etc. has vast applications in different areas especially in computational geometry. Alpha shape and concave hull are generalizations of convex hull. Unlike the convex hull, they construct non-convex enclosure on a set of points. In this paper, we introduce another generalization of convex hull, named alpha-concave hull, and compare this concept with convex hull and alpha shape. We show that the alpha-concave hull is also a general...

Modeling of steady motion and vertical-plane dynamics of a tunnel hull

Directory of Open Access Journals (Sweden)

Chaney Christopher S.

2014-06-01

Full Text Available High-speed marine vehicles can take advantage of aerodynamically supported platforms or air wings to increase maximum speed or transportation efficiency. However, this also results in increased complexity of boat dynamics, especially in the presence of waves and wind gusts. In this study, a mathematical model based on the fully unsteady aerodynamic extreme-ground-effect theory and the hydrodynamic added-mass strip theory is applied for simulating vertical-plane motions of a tunnel hull in a disturbed environment, as well as determining its steady states in calm conditions. Calculated responses of the boat to wind gusts and surface waves are demonstrated. The present model can be used as a supplementary method for preliminary estimations of performance of aerodynamically assisted marine craft.

Foam rigidized inflatable structural assemblies

Science.gov (United States)

Tinker, Michael L. (Inventor); Schnell, Andrew R. (Inventor)

2010-01-01

An inflatable and rigidizable structure for use as a habitat or a load bearing structure is disclosed. The structure consists of an outer wall and an inner wall defining a containment member and a bladder. The bladder is pressurized to erect the structure from an initially collapsed state. The containment member is subsequently injected with rigidizable fluid through an arrangement of injection ports. Exhaust gases from the curing rigidizable fluid are vented through an arrangement of exhaust ports. The rate of erection can be controlled by frictional engagement with a container or by using a tether. A method for fabricating a tubular structure is disclosed.

On the global ship hull bending energy in ship collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Li, Yujie

2009-01-01

During ship collisions part of the kinetic energy of the involved vessels immediately prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can...... be stored in elastic hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non-trivial part of the energy released for structural deformation during the collision can be absorbed as elastic...... energy in global ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship–ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing...

Tile-based rigidization surface parametric design study

Science.gov (United States)

Giner Munoz, Laura; Luntz, Jonathan; Brei, Diann; Kim, Wonhee

2018-03-01

Inflatable technologies have proven useful in consumer goods as well as in more recent applications including civil structures, aerospace, medical, and robotics. However, inflatable technologies are typically lacking in their ability to provide rigid structural support. Particle jamming improves upon this by providing structures which are normally flexible and moldable but become rigid when air is removed. Because these are based on an airtight bladder filled with loose particles, they always occupy the full volume of its rigid state, even when not rigidized. More recent developments in layer jamming have created thin, compact rigidizing surfaces replacing the loose volume of particles with thinly layered surface materials. Work in this area has been applied to several specific applications with positive results but have not generally provided the broader understanding of the rigidization performance as a function of design parameters required for directly adapting layer rigidization technology to other applications. This paper presents a parametric design study of a new layer jamming vacuum rigidization architecture: tile-based vacuum rigidization. This form of rigidization is based on layers of tiles contained within a thin vacuum bladder which can be bent, rolled, or otherwise compactly stowed, but when deployed flat, can be vacuumed and form a large, flat, rigid plate capable of supporting large forces both localized and distributed over the surface. The general architecture and operation detailing rigidization and compliance mechanisms is introduced. To quantitatively characterize the rigidization behavior, prototypes rigidization surfaces are fabricated and an experimental technique is developed based on a 3-point bending test. Performance evaluation metrics are developed to describe the stiffness, load-bearing capacity, and internal slippage of tested prototypes. A set of experimental parametric studies are performed to better understand the impact of

The interaction of extreme waves with hull elements

Science.gov (United States)

Galiev, Shamil; Flay, Richard

2010-05-01

The problem of the impact of a rogue wave onto a deformable marine structure is formulated in a few publications (see, for example, a short review in http://researchspace.auckland.ac.nz/handle/2292/4474). In this paper the results from numerical and experimental investigations of the effect of cavitation on the deformation of a hull element, loaded by a wall of water, generated by an extreme ocean surface wave are considered. The hull element is modelled as a circular metal plate with the edge of the plate rigidly clamped. The plate surface is much smaller than the surface of the wave front, so that at the initial moment of the interaction, the pressure is constant on the plate surface. At the next instant, because of the plate deformation, axisymmetric loading of the plate occurs. The influences of membrane forces and plastic deformations are ignored, and therefore, the equation of plate motion has the following classical form Eh3(wrrrr+2r -1wrrrr- r-2wrr+r-3wr) = - 121- ν2)[ρhwtt+ δ(r,t)(p+ ρ0a0wt)]. Here w is the plate displacement, subscripts t and rindicate derivatives with respect to time and the radial coordinate, PIC is the plate material density, his the plate thickness, Eis Young's modulus, PIC is Poisson's ratio and p is the pressure of the incident surface wave measured on the wall, PIC is the water density, PIC is the speed of sound in water, and PIC is the normal velocity of the plate. The term PIC takes into account the effect of the deformability of the plate. Obviously, the hull of a vessel is not rigid like a solid wall, but starts to deform and to move. This motion produces a reflected pressure wave, which travels from the hull into the water wave with a magnitude equal to PIC . The normal velocity is positive so the reflected pressure PIC is negative (tensile wave). If the fluid pressure drops below some critical value pk, the wet plate surface separates from the water, and cavitation may be generated. The function δ(r,t) takes into account

On the Global Ship Hull Bending Energy in Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Li, Y.

2004-01-01

During ship collisions part of the kinetic energy of the involved vessels prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can be stored in elastic...... hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non trivial part of the energy released for structural deformation during the collision can be absorbed as elastic energy in global...... ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship-ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing is confined...

Biofouling and Design of a Biomimetic Hull-Grooming Tool

Science.gov (United States)

2007-09-14

have barred the use of organotin compounds such as tributyltin ( TBT ) and copper-based paints, which are currently used by the Navy and have become...copper into the water, killing the fouling organisms. There is new research in biomimetic polymers that deter fouling, but are non- toxic . These polymers...is new research in biomimetic polymers that deter fouling, but are non- toxic . These polymers are rigidly attached to the hull surface extending

Boat sampling

International Nuclear Information System (INIS)

Citanovic, M.; Bezlaj, H.

1994-01-01

This presentation describes essential boat sampling activities: on site boat sampling process optimization and qualification; boat sampling of base material (beltline region); boat sampling of weld material (weld No. 4); problems accompanied with weld crown varieties, RPV shell inner radius tolerance, local corrosion pitting and water clarity. The equipment used for boat sampling is described too. 7 pictures

Incorporating Financial Stability in Inflation Targeting Frameworks

OpenAIRE

Burcu Aydin; Engin Volkan

2011-01-01

The global financial crisis has exposed the limitations of a conventional inflation targeting (IT) framework in insulating an economy from shocks, and demonstrated that its rigid application may aggravate the effect of shocks on output and inflation. Accordingly, we investigate possible refinements to the IT framework by incorporating financial stability considerations. We propose a small open economy DSGE model, calibrated for Korea during the period of 2003 - 07, with real and financial fri...

Large inflated-antenna system

Science.gov (United States)

Hinson, W. F.; Keafer, L. S.

1984-01-01

It is proposed that for inflatable antenna systems, technology feasibility can be demonstrated and parametric design and scalability (scale factor 10 to 20) can be validated with an experiment using a 16-m-diameter antenna attached to the Shuttle. The antenna configuration consists of a thin film cone and paraboloid held to proper shape by internal pressure and a self-rigidizing torus. The cone and paraboloid would be made using pie-shaped gores with the paraboloid being coated with aluminum to provide reflectivity. The torus would be constructed using an aluminum polyester composite that when inflated would erect to a smooth shell that can withstand loads without internal pressure.

On the Influence of Hull Girder Flexibility on the Wave

DEFF Research Database (Denmark)

Seng, Sopheak; Andersen, Ingrid Marie Vincent; Jensen, Jørgen Juncher

2012-01-01

Numerical predictions and model test results of the wave induced bending moments in a 9,400 TEU post-Panamax container vessel are presented for two regular wave scenarios. Different numerical procedures have been applied: a linear and non-linear time-domain strip theory and a direct calculation (...... (CFD) solving the Navier-Stokes equations with the free surface captured by a volume-of-fluid (VOF) method. In all procedures the flexibility of the hull girder is modelled as a non-uniform Timoshenko beam. It is observed that the non-linear models agree well with the model tests...... and as there is no occurrence of severe slamming in the cases considered, the inexpensive non-linear strip theory is as accurate as the direct CFD calculation method. In a comparison with the results using the rigid body assumption, the increase in the vertical bending moment (VBM) amidships due to the flexibility of the hull...... girder is found to be approximately 7% (peak-to-peak amplitude) in general. The non-linear responses, however, contain over-harmonic frequencies which may coincide with the natural frequency of the two-node vertical bending mode inducing resonance. In that case the hull girder flexibility causes...

Inflatable Re-Entry Vehicle Experiment (IRVE) Design Overview

Science.gov (United States)

Hughes, Stephen J.; Dillman, Robert A.; Starr, Brett R.; Stephan, Ryan A.; Lindell, Michael C.; Player, Charles J.; Cheatwood, F. McNeil

2005-01-01

Inflatable aeroshells offer several advantages over traditional rigid aeroshells for atmospheric entry. Inflatables offer increased payload volume fraction of the launch vehicle shroud and the possibility to deliver more payload mass to the surface for equivalent trajectory constraints. An inflatable s diameter is not constrained by the launch vehicle shroud. The resultant larger drag area can provide deceleration equivalent to a rigid system at higher atmospheric altitudes, thus offering access to higher landing sites. When stowed for launch and cruise, inflatable aeroshells allow access to the payload after the vehicle is integrated for launch and offer direct access to vehicle structure for structural attachment with the launch vehicle. They also offer an opportunity to eliminate system duplication between the cruise stage and entry vehicle. There are however several potential technical challenges for inflatable aeroshells. First and foremost is the fact that they are flexible structures. That flexibility could lead to unpredictable drag performance or an aerostructural dynamic instability. In addition, durability of large inflatable structures may limit their application. They are susceptible to puncture, a potentially catastrophic insult, from many possible sources. Finally, aerothermal heating during planetary entry poses a significant challenge to a thin membrane. NASA Langley Research Center and NASA's Wallops Flight Facility are jointly developing inflatable aeroshell technology for use on future NASA missions. The technology will be demonstrated in the Inflatable Re-entry Vehicle Experiment (IRVE). This paper will detail the development of the initial IRVE inflatable system to be launched on a Terrier/Orion sounding rocket in the fourth quarter of CY2005. The experiment will demonstrate achievable packaging efficiency of the inflatable aeroshell for launch, inflation, leak performance of the inflatable system throughout the flight regime, structural

Rigidity-tuning conductive elastomer

Science.gov (United States)

Shan, Wanliang; Diller, Stuart; Tutcuoglu, Abbas; Majidi, Carmel

2015-06-01

We introduce a conductive propylene-based elastomer (cPBE) that rapidly and reversibly changes its mechanical rigidity when powered with electrical current. The elastomer is rigid in its natural state, with an elastic (Young’s) modulus of 175.5 MPa, and softens when electrically activated. By embedding the cPBE in an electrically insulating sheet of polydimethylsiloxane (PDMS), we create a cPBE-PDMS composite that can reversibly change its tensile modulus between 37 and 1.5 MPa. The rigidity change takes ˜6 s and is initiated when a 100 V voltage drop is applied across the two ends of the cPBE film. This magnitude of change in elastic rigidity is similar to that observed in natural skeletal muscle and catch connective tissue. We characterize the tunable load-bearing capability of the cPBE-PDMS composite with a motorized tensile test and deadweight experiment. Lastly, we demonstrate the ability to control the routing of internal forces by embedding several cPBE-PDMS ‘active tendons’ into a soft robotic pneumatic bending actuator. Selectively activating the artificial tendons controls the neutral axis and direction of bending during inflation.

Rigidity-tuning conductive elastomer

International Nuclear Information System (INIS)

Shan, Wanliang; Diller, Stuart; Tutcuoglu, Abbas; Majidi, Carmel

2015-01-01

We introduce a conductive propylene-based elastomer (cPBE) that rapidly and reversibly changes its mechanical rigidity when powered with electrical current. The elastomer is rigid in its natural state, with an elastic (Young’s) modulus of 175.5 MPa, and softens when electrically activated. By embedding the cPBE in an electrically insulating sheet of polydimethylsiloxane (PDMS), we create a cPBE–PDMS composite that can reversibly change its tensile modulus between 37 and 1.5 MPa. The rigidity change takes ∼6 s and is initiated when a 100 V voltage drop is applied across the two ends of the cPBE film. This magnitude of change in elastic rigidity is similar to that observed in natural skeletal muscle and catch connective tissue. We characterize the tunable load-bearing capability of the cPBE–PDMS composite with a motorized tensile test and deadweight experiment. Lastly, we demonstrate the ability to control the routing of internal forces by embedding several cPBE–PDMS ‘active tendons’ into a soft robotic pneumatic bending actuator. Selectively activating the artificial tendons controls the neutral axis and direction of bending during inflation. (paper)

Global embedding of fibre inflation models

Energy Technology Data Exchange (ETDEWEB)

Cicoli, Michele [Dipartimento di Fisica e Astronomia, Università di Bologna,via Irnerio 46, 40126 Bologna (Italy); INFN - Sezione di Bologna,viale Berti Pichat 6/2, 40127 Bologna (Italy); Abdus Salam ICTP,Strada Costiera 11, Trieste 34151 (Italy); Muia, Francesco [Rudolf Peierls Centre for Theoretical Physics, University of Oxford,1 Keble Rd., Oxford OX1 3NP (United Kingdom); Shukla, Pramod [Abdus Salam ICTP,Strada Costiera 11, Trieste 34151 (Italy)

2016-11-30

We present concrete embeddings of fibre inflation models in globally consistent type IIB Calabi-Yau orientifolds with closed string moduli stabilisation. After performing a systematic search through the existing list of toric Calabi-Yau manifolds, we find several examples that reproduce the minimal setup to embed fibre inflation models. This involves Calabi-Yau manifolds with h{sup 1,1}=3 which are K3 fibrations over a ℙ{sup 1} base with an additional shrinkable rigid divisor. We then provide different consistent choices of the underlying brane set-up which generate a non-perturbative superpotential suitable for moduli stabilisation and string loop corrections with the correct form to drive inflation. For each Calabi-Yau orientifold setting, we also compute the effect of higher derivative contributions and study their influence on the inflationary dynamics.

14 CFR 23.755 - Hulls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hulls. 23.755 Section 23.755 Aeronautics... Hulls § 23.755 Hulls. (a) The hull of a hull seaplane or amphibian of 1,500 pounds or more maximum weight must have watertight compartments designed and arranged so that the hull auxiliary floats, and...

33 CFR 110.31 - Hull Bay and Allerton Harbor at Hull, Mass.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Hull Bay and Allerton Harbor at Hull, Mass. 110.31 Section 110.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.31 Hull Bay and Allerton Harbor at...

The vibrations of a flexible planing craft: hydroelasticity, boat motion and noise

OpenAIRE

Halswell, Peter K.

2015-01-01

The Royal National Lifeboat Institution (RNLI) is the charity that aims to save lives at sea. The RNLI D-class is a five metre inflatable lifeboat that is used near the shore in waves and surf. Anecdotal evidence indicates that the D-class has improved performance due to its unique, flexible, fabric structure, and this flexibility is highly likely to affect the vibrations generated by the D-class. The boat motion is experienced by the on-board crew, and the air and water borne noise are heard...

Inflation, GDP growth and population change in the USA

OpenAIRE

Ivan Kitov

2005-01-01

Inflation in the USA between 1960 and 2004 is studied in the framework of the revealed rigidity of the personal income distribution normalized to the total nominal GDP. Inflation is found to be a mechanism, which prevents changes in the relative incomes induced by economic growth and population changes - both in number and age structure. A model is developed linking CPI to GDP growth rate and relative change of the number of people of some specific age. The GDP growth rate is characterized by...

14 CFR 25.755 - Hulls.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hulls. 25.755 Section 25.755 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.755 Hulls. (a) Each hull must have enough watertight compartments so that, with any two adjacent compartments flooded, the...

Flutter Instability of a Fluid-Conveying Fluid-Immersed Pipe Affixed to a Rigid Body

Science.gov (United States)

2011-01-01

rigid body, denoted by y in Fig. 4, is small. This is in addition to the Euler– Bernoulli beam assumption that the slope of the tail is small everywhere...here. These include the efficiency with which the prime mover can generate fluid momentum , pipe losses, and external drag acting on both the hull and the

New Russian Combat Small Boats

Directory of Open Access Journals (Sweden)

Aleksandr F. Mitrofanov

2016-12-01

Full Text Available The article presents an overview of small combat boats. The author provides a description and gives an analysis of the characteristics of the boat "Raptor", boat "BK-16", boat "Strizh-4-1 DSh", and assault boat "BK-10".

METHODOLOGY OF THE HYBRID PROPULSION SYSTEM (DMP & DEP FOR TRIMARAN TYPE FAST PATROL BOAT

Directory of Open Access Journals (Sweden)

Aulia Widyandari

2012-04-01

Full Text Available There are lot of research done to develop a patrol boat, from the modification of hull model until propulsion system equipment. For example the model ship type AMV (Advanced Marine Vehicle was developed starting from the Catamaran, Trimaran and  Pentamaran model. Everything is aimed at obtaining the ship design that has the speed and stability. In addition to achieving high-speed vessel must be equipped with propulsion (Main Power is great, that means the main engine dimensions, auxiliary equipments and fuel tanks is too large. Many Limitations of space on the ship's engine room trimaran vessel is the main obstacle in designing propulsion system. Beside that Patrol boat should have many missions speed, so propulsion system should be designed at that conditions.   Hybrid propulsion is a combination of Diesel Mechanical Propulsion (DMP with Diesel Electric Propulsion (DEP. DMP system is connected directly to the propeller shaft (or through a reduction-gear. DMP has provide more efficiency rate of 95%. While DEP is only able to provide efficiency by 85% - 89% is slightly lower than DMP, but the DEP offers many advantages such as simplicity and suitability in the rotational speed settings, control systems, engine power production Redundancy, Flexibility in the design of equipments layout in engine rooms, noise, vibration and fuel consumption efficiency which affects the lower pollution.   Design of Hybrid Propulsion system can be satisfied and achieved the Power requirements and optimally at all speed condition of patrol boat. Therefore the author made using modeling Maxsurf-11.12 software and carried out various optimization of the choice of main engine, propeller and system conditions for fast patrol boat cruise. 

STUDI KOMPARASI KINERJA HULL FORM METODE SCHELTEMA DENGAN HULL FORM KAPAL IKAN TRADISIONAL TIPE DAERAH BATANG

OpenAIRE

A.F. Zakki; Parlindungan Manik

2012-01-01

This study comparation of hull form performance was analysed becaused there was suggestion that a ship was built by hull form scheming this time (Scheltema, Formdata, NPL Series) is better than a ship that was built traditionally because there is no basic erudite calculation in hull form design. So hull form design was result of natural adaptation. Such performance are ship’s resistance, stability, and ship’s navigation.This research about hull form performance is expected can giv...

Real wage rigidity and the new Phillips curve: the Brazilian case

Directory of Open Access Journals (Sweden)

Antonio Alberto Mazali

2010-09-01

Full Text Available The new Keynesian Phillips curve has been criticized for not explaining the short-run inflation-output gap trade-off. Blanchard and Galí (2007 introduced real wage rigidity and derived a trade-off between stabilizing inflation and the gap between actual and efficient output. This paper estimates the new Phillips curve for the Brazilian economy, computes short-run trade-off, analyzes real wage rigidity, and tests theoretical restrictions imposed by the model. The GMM estimations fit the data very well and all theoretical restrictions are satisfied. There is strong real wage rigidity and a high output-gap cost to stabilize inflation in the short run.A curva de Phillips novo-keynesiana tem sido criticada por não explicar o trade-off de curto prazo entre inflação-hiato do produto. Blanchard e Galí (2007 introduziram a rigidez do salário real e derivaram um trade-off entre estabilizar inflação ou estabilizar hiato entre produto real e eficiente. Neste artigo estima-se essa nova curva para a economia brasileira, calcula-se o trade-off, analisa-se a rigidez do salário real e testa-se restrições teóricas do modelo. Estimações GMM adequam-se bem aos dados e todas as restrições teóricas são satisfeitas. Há forte rigidez do salário real e alto custo de hiato do produto para estabilizar inflação no curto prazo.

Toxicological assessment and management options for boat pressure-washing wastewater.

Science.gov (United States)

Gerić, Marko; Gajski, Goran; Oreščanin, Višnja; Kollar, Robert; Franekić, Jasna; Garaj-Vrhovac, Vera

2015-04-01

Boats are washed periodically for maintenance in order to remove biofoulants from hulls, which results in the generation of wastewater. This study aimed at evaluating the cyto/genotoxic and mutagenic properties of wastewater produced by pressure washing of boats. The chemical characterisation of this wastewater showed that Cu, Zn, V, Cr, Fe, Pb, and select organic contaminants exceeded the maximum allowable values from 1.7 up to 96 times. The wastewater produced negative effects on human lymphocytes resulting in decreased cell viability after 4 and 24h of exposure. Chromosome aberration, micronucleus, and comet assay parameters were significantly higher after 24h of exposure. At the same time, the Salmonella typhimurium test showed negative for both TA98 and TA100 strains at all of the concentrations tested. After the treatment of wastewater using electrochemical methods/ozonation during real scale treatment plant, removal rates of colour, turbidity and heavy metals ranged from 99.4% to 99.9%, while the removal of total organic carbon (TOC) and chemical oxygen demand (COD) was above 85%. This was reflected in the removal of the wastewater's cyto/genotoxicity, which was comparable to negative controls in all of the conducted tests, suggesting that such plants could be implemented in marinas to minimise human impact on marine systems. Copyright © 2015 Elsevier Inc. All rights reserved.

Financial Constraints and Nominal Price Rigidities

DEFF Research Database (Denmark)

Menno, Dominik Francesco; Balleer, Almut; Hristov, Nikolay

This paper investigates how financial market imperfections and the frequency of price adjustment interact. Based on new firm-level evidence for Germany, we document that financially constrained firms adjust prices more often than their unconstrained counterparts, both upwards and downwards. We show...... that these empirical patterns are consistent with a partial equilibrium menu-cost model with a working capital constraint. We then use the model to show how the presence of financial frictions changes profits and the price distribution of firms compared to a model without financial frictions. Our results suggest...... that tighter financial constraints are associated with higher nominal rigidities, higher prices and lower output. Moreover, in response to aggregate shocks, aggregate price rigidity moves substantially, the response of inflation is dampened, while output reacts more in the presence of financial frictions...

14 CFR 29.755 - Hull buoyancy.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull buoyancy. 29.755 Section 29.755... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.755 Hull buoyancy. Water-based and amphibian rotorcraft. The hull and auxiliary floats, if used, must have enough...

The Evaluation of Cone Capsule as an Alternative Hull form for Portable Tsunami Lifeboat to Support Evacuation System in the Coastal Regions and Small Islands

Science.gov (United States)

Fauzan Zakki, Ahmad; Suharto; Windyandari, Aulia

2018-03-01

Several attempts have been made to reduce the risk of tsunami disasters such as the development of early warning systems, evacuation procedures training, coastal protection and coastal spatial planning. Although many efforts to mitigate the impact of the tsunami in Indonesia was made, no one has developed a portable disaster rescue vehicle/shelter as well as a lifeboat on ships and offshore building, which is always available when a disaster occurs. The aim of the paper is to evaluate the performance of cone capsule shaped hull form that would be used for the portable tsunami lifeboat. The investigation of the boat resistance, intact stability, and seakeeping characteristics was made. The numerical analysis results indicate that the cone capsule is reliable as an alternative hull form for the portable tsunami lifeboat.

Inflation targeting and core inflation

OpenAIRE

Julie Smith

2005-01-01

This paper examines the interaction of core inflation and inflation targeting as a monetary policy regime. Interest in core inflation has grown because of inflation targeting. Core inflation is defined in numerous ways giving rise to many potential measures; this paper defines core inflation as the best forecaster of inflation. A cross-country study finds before the start of inflation targeting, but not after, core inflation differs between non-inflation targeters and inflation targeters. Thr...

Technical note: In situ ruminal starch disappearance kinetics of hull-less barley, hulled barley, and corn grains.

Science.gov (United States)

Ferreira, G; Yang, Y; Teets, C L; Brooks, W S; Griffey, C A

2018-07-01

The objective of this study was to compare ruminal starch disappearance rates of hull-less barley, hulled barley, and corn grains. Five different genotypes were used for each of the 2 barley types. In addition, each of these genotypes was grown in 2 different locations and years, resulting 10 independent barley samples for each of the 2 barley grain types. Five different genotypes of corn grain were obtained from a commercial seed company. After being ground to pass through a 4-mm screen of a cutter mill, 3.6 g of each grain was placed into a porous bag, which was then incubated in the rumen of 2 ruminally cannulated cows for 0, 4, 8, 12, 24, and 48 h. Corn grains had greater instant ruminal starch disappearances than barley grains (22.4 and 8.2%, respectively). Instant ruminal starch disappearances did not differ between hulled and hull-less barley grains. Ruminal starch fractional disappearance rates were greatest for hulled barley grains, moderate for hull-less barley grains, and lowest for corn grains (15.3, 13.9, and 7.1%/h, respectively). Ruminal starch half-life was shortest for hulled and hull-less barley grains (4.4 h) and longest for corn grains (6.6 h). Ruminal starch half-life did not differ between hulled barley and hull-less barley grains. In conclusion, using a holistic experimental design and statistical analysis, this study showed that starch from hull-less barley grains has a ruminal half-life similar to that of hulled barley grains and shorter than that of corn grains. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

46 CFR 176.802 - Hull.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull. 176.802 Section 176.802 Shipping COAST GUARD... CERTIFICATION Material Inspections § 176.802 Hull. (a) At each initial and subsequent inspection for... ready for inspections of the hull structure and its appurtenances, including the following: (1...

46 CFR 45.129 - Hull fittings: General.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Hull fittings: General. 45.129 Section 45.129 Shipping... Assignment § 45.129 Hull fittings: General. Hull fittings must be securely mounted in the hull so as to avoid increases in hull stresses and must be protected from local damage caused by movement of equipment or cargo. ...

46 CFR 169.239 - Hull.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull. 169.239 Section 169.239 Shipping COAST GUARD... Certification Inspections § 169.239 Hull. At each inspection for certification and periodic inspection, the vessel must be afloat and ready for the following tests and inspections of the hull structure and its...

WORLD TRAINING SAILING BOATS

Directory of Open Access Journals (Sweden)

Svitlana Yeroshkina

2016-06-01

Full Text Available In scientific article is researched tendencies, which took place in historical process of the world segmentation of sailing tall ships and their influence on modern composition on whole word’s training sailing boats. By variety parameters modern composition of ships was done the estimation of most biggest tall sailing ships. Complete technical description of the powerful sailing tall ships was done on the present day. Identified and given the technical possibilities for further exploitation of  Ukrainian training sailing boats. Assesses the current state of the sailing fleet in terms of economic costs and expenses of Crimea’s occupation and continuous war on eastern region of Ukraine.Key words: training sailing boats, world segment of sailing boats, sailing boats. JEL: L 92

46 CFR 115.802 - Hull.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull. 115.802 Section 115.802 Shipping COAST GUARD....802 Hull. (a) At each initial and subsequent inspection for certification of a vessel, the owner or managing operator shall be prepared to conduct tests and have the vessel ready for inspections of the hull...

Dynamic Planar Convex Hull

DEFF Research Database (Denmark)

Brodal, Gerth Stølfting; Jacob, Rico

2002-01-01

In this paper we determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage of the d......In this paper we determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage...... of the data structure is O(n). The data structure supports extreme point queries in a given direction, tangent queries through a given point, and queries for the neighboring points on the convex hull in O(log n) time. The extreme point queries can be used to decide whether or not a given line intersects...... the convex hull, and the tangent queries to determine whether a given point is inside the convex hull. We give a lower bound on the amortized asymptotic time complexity that matches the performance of this data structure....

Identification of a novel SPLIT-HULL (SPH) gene associated with hull splitting in rice (Oryza sativa L.).

Science.gov (United States)

Lee, Gileung; Lee, Kang-Ie; Lee, Yunjoo; Kim, Backki; Lee, Dongryung; Seo, Jeonghwan; Jang, Su; Chin, Joong Hyoun; Koh, Hee-Jong

2018-07-01

The split-hull phenotype caused by reduced lemma width and low lignin content is under control of SPH encoding a type-2 13-lipoxygenase and contributes to high dehulling efficiency. Rice hulls consist of two bract-like structures, the lemma and palea. The hull is an important organ that helps to protect seeds from environmental stress, determines seed shape, and ensures grain filling. Achieving optimal hull size and morphology is beneficial for seed development. We characterized the split-hull (sph) mutant in rice, which exhibits hull splitting in the interlocking part between lemma and palea and/or the folded part of the lemma during the grain filling stage. Morphological and chemical analysis revealed that reduction in the width of the lemma and lignin content of the hull in the sph mutant might be the cause of hull splitting. Genetic analysis indicated that the mutant phenotype was controlled by a single recessive gene, sph (Os04g0447100), which encodes a type-2 13-lipoxygenase. SPH knockout and knockdown transgenic plants displayed the same split-hull phenotype as in the mutant. The sph mutant showed significantly higher linoleic and linolenic acid (substrates of lipoxygenase) contents in spikelets compared to the wild type. It is probably due to the genetic defect of SPH and subsequent decrease in lipoxygenase activity. In dehulling experiment, the sph mutant showed high dehulling efficiency even by a weak tearing force in a dehulling machine. Collectively, the results provide a basis for understanding of the functional role of lipoxygenase in structure and maintenance of hulls, and would facilitate breeding of easy-dehulling rice.

46 CFR 176.655 - Hull examination reports.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull examination reports. 176.655 Section 176.655... TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.655 Hull examination reports. (a) If you use only divers for the underwater survey portion of the Alternative Hull Examination (AHE...

46 CFR 154.174 - Transverse contiguous hull structure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Transverse contiguous hull structure. 154.174 Section... Equipment Hull Structure § 154.174 Transverse contiguous hull structure. (a) The transverse contiguous hull...) The transverse contiguous hull structure of a vessel having cargo containment systems with secondary...

Measurement of leached hulls

International Nuclear Information System (INIS)

Reilly, T.D.

1979-07-01

Leached hulls are the short lengths of fuel rod cladding and fuel element hardware which constitute a major waste product of a reprocessing plant employing a chop-and-leach head-end process. The small, undissolved fuel residue (0.1 to 1.0% of original fuel content) which is discarded with this waste must be measured for safeguards, material accountability, and process control reasons. This report gives a critical analysis of hull measurement techniques involving the analysis of fission product gamma rays, spontaneous fission neutrons from curium, and delayed neutron activation. Major emphasis is given to the measurement of 2186-keV gamma rays from 144 Ce-- 144 Pr. A detailed description of typical leached hull characteristics is presented at the beginning of the report. An extensive review of experience gained from existing hull measurement systems in the United Kingdom, France, Japan, Germany, Italy, and the United States is presented

Dynamic Planar Convex Hull

DEFF Research Database (Denmark)

Jacob, Riko

We determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage of the data structure...... is O(n). The data structure supports extreme point queries in a given direction, tangent queries through a given point, and queries for the neighboring points on the convex hull in O(log n) time. The extreme point queries can be used to decide whether or not a given line intersects the convex hull......, and the tangent queries to determine whether a given point is inside the convex hull. The space usage of the data structure is O(n). We give a lower bound on the amortized asymptotic time complexity that matches the performance of this data structure....

46 CFR 151.10-20 - Hull construction.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Hull construction. 151.10-20 Section 151.10-20 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Barge Hull Construction Requirements § 151.10-20 Hull construction. (a) Construction features. (1) Each barge hull shall be constructed with a suitable bow form...

46 CFR 115.655 - Hull examination reports.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull examination reports. 115.655 Section 115.655... CERTIFICATION Hull and Tailshaft Examinations § 115.655 Hull examination reports. (a) If you use only divers for the underwater survey portion of the Alternative Hull Examination (AHE), you must provide the Officer...

21 CFR 573.160 - Ammoniated rice hulls.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammoniated rice hulls. 573.160 Section 573.160... Additive Listing § 573.160 Ammoniated rice hulls. The food additive ammoniated rice hulls may be safely... obtained by the treatment of ground rice hulls with monocalcium phosphate and anhydrous ammonia at a...

Cost Benefit Analysis of Boat Lifts

Science.gov (United States)

2014-09-01

associated with commercial boat lifts were obtained through a market survey based on products advertised for sale to the general public. The information...from the market survey and knowledge of specific boat maintenance items susceptible to cost reduction using a boat lift were then compared to identify...transferred to the Boat Inventory Manager ( BIM ). Custodians are responsible for maintaining boats and small craft in good working order at all times

Exchange rate pass-through and the frequency of price adjustment across different inflation regimes

Directory of Open Access Journals (Sweden)

Petrović Pavle

2015-01-01

Full Text Available The paper explores the link between the inflationary environment and the size of the exchange rate pass-through (ERPT into domestic prices, as inflation descends from an extreme, second highest and second longest hyperinflation in the 20th century, to high and then moderate inflation in Serbia. We found that ERPT decreases with a decline in the inflation level, variability and persistence, thus supplementing findings previously acquired in panel studies across countries. Our findings can be explained by surging empirical evidence on state contingent behavior of pricing, which indicates a sharp increase in the frequency of price adjustment as one moves from moderate, via high to hyperinflation, suggesting that the degree of price rigidities is a key determinant of the size and speed of ERPT. ERPT estimates are embedded in careful analysis of inflation episodes in Serbia, showing that hyper and high inflation episodes subscribe to the same, fiscal explanation, as opposed to the moderate inflation ones, where supply and demand shocks have been the main inflation drivers.

46 CFR 199.262 - Rescue boats.

Science.gov (United States)

2010-10-01

... SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Cargo Vessels § 199.262 Rescue boats. (a) Each cargo vessel must carry at least one rescue boat. Each rescue boat must be approved under approval... 46 Shipping 7 2010-10-01 2010-10-01 false Rescue boats. 199.262 Section 199.262 Shipping COAST...

Rice Hulls as a Renewable Complex Material Resource

Directory of Open Access Journals (Sweden)

Irina Glushankova

2018-05-01

Full Text Available As a result of rice grain processing, a big amount of waste (up to 20% is produced. It is mainly rice hulls. The main components of rice hulls are cellulose, lignin and mineral ash. The mineral ash quantity in rice hulls varies from 15 up to 20%, by weight of the rice hulls. The mineral ash consists of amorphous silica (opal-type. Due to the high content of silica in rice hulls, the material burns with difficulty under natural conditions, and it is biodegradably destroyed only with difficulty, when composted. Utilization of rice hulls then becomes an ecological problem due to huge rice production and its continuous growth. At the same time, the annual quantity of silica content in rice hulls is comparable with the quantity of amorphous silica produced as a mineral resource. The issue of manufacturing cellular glass silica construction materials from rice hulls as a renewable resource is discussed in this paper. The utilization technology is based on an amorphous silicon oxide with the use of energy from the combustion of the organic component of rice hulls.

Motions and Hull-Induced Bridging-Structure Loads for a Small Waterplane Area, Twin-Hulled, Attack Aircraft Carrier in Waves

National Research Council Canada - National Science Library

Jones, Harry D; Gerzina, David M

1973-01-01

... small waterplane area, twin-hulled, attack aircraft carrier in waves. Motions of the model were measured, together with the forces and moments induced by the hulls on the cross structure spanning the two hulls...

Inflation and Inflation Uncertainty in Turkey

OpenAIRE

dogru, bulent

2014-01-01

Abstract: In this study, the relationship between inflation and inflation uncertainty is analyzed using Granger causality tests with annual inflation series covering the time period 1923 to 2012 for Turkish Economy. Inflation uncertainty is measured by Exponential Generalized Autoregressive Conditional Heteroskedastic model. Econometric findings suggest that although in long run the Friedman's hypothesis that high inflation increases inflation ...

Investigating the asymmetric relationship between inflation-output growth exchange rate changes

Science.gov (United States)

Chu, Jenq Fei; Sek, Siok Kun

2017-08-01

The relationship between inflation-output growth or output variation has long been studied. In this study, we extend the investigation under two exchange rate flexibility/regime in four Asian countries (Indonesia, Korea, Philippines and Thailand) that have experienced drastic exchange rate regime changes aftermath the financial crisis of 1997. These countries have switched from fixed/rigid exchange rate regime to flexible exchange rate and inflation targeting (IT) regime after the crisis. Our main objective is to compare the inflation-output trade-off relationship in the pre-IT and post-IT periods as a tool to evaluate the efficiency of monetary policy. A nonlinear autoregressive distributed lags (NARDL) model is applied to capture the asymmetric effects of exchange rate changes (increases and decreases). The data ranging from 1981M1 onwards till 2016M3. Our results show that exchange rate has asymmetric effect on inflation both short-run and long-run with larger impact in the post-IT period under flexible regime. Depreciation of exchange rate has leads to higher inflation. Furthermore, we find evidences on the relationship between inflation and growth in both short-run and long-run, but the trade-off only detected in the short run both in the pre- and post-IT periods.

Boat boarding ladder placement

Science.gov (United States)

1998-04-01

Presented in three volumes; 'Boat Boarding Ladder Placement,' which explores safety considerations including potential for human contact with a rotating propeller; 'Boat Handhold Placement,' which explores essential principles and methods of fall con...

46 CFR 115.645 - Alternative Hull Examination (AHE) Procedure.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Alternative Hull Examination (AHE) Procedure. 115.645... AND CERTIFICATION Hull and Tailshaft Examinations § 115.645 Alternative Hull Examination (AHE... underwater hull plating and a detailed examination of all hull welds, propellers, tailshafts, rudders, and...

46 CFR 154.176 - Longitudinal contiguous hull structure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Longitudinal contiguous hull structure. 154.176 Section... Equipment Hull Structure § 154.176 Longitudinal contiguous hull structure. (a) The longitudinal contiguous hull structure of a vessel having cargo containment systems without secondary barriers must meet the...

46 CFR 172.085 - Hull type.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull type. 172.085 Section 172.085 Shipping COAST GUARD... of This Chapter § 172.085 Hull type. If a cargo listed in Table 151.05 of part 151 of this chapter is to be carried, the tank barge must be at least the hull type specified in Table 151.05 of this...

Rocking the Boat: Damage to Eelgrass by Swinging Boat Moorings

Directory of Open Access Journals (Sweden)

Richard K. F. Unsworth

2017-07-01

Full Text Available Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carbon in sediments. Although boat moorings have been documented to impact seagrasses, studies to date have been conducted on the slow growing Posidonia species’ rather than the fast growing and rapidly reproducing Z. marina that may have a higher capacity to resist and recover from repeated disturbance. In the present study we examine swinging chain boat moorings in seagrass meadows across a range of sites in the United Kingdom to determine whether such moorings have a negative impact on the seagrass Zostera marina at the local and meadow scale. We provide conclusive evidence from multiple sites that Z. marina is damaged by swinging chain moorings leading to a loss of at least 6 ha of United Kingdom seagrass. Each swinging chain mooring was found to result in the loss of 122 m2 of seagrass. Loss is restricted to the area surrounding the mooring and the impact does not appear to translate to a meadow scale. This loss of United Kingdom seagrass from boat moorings is small but significant at a local scale. This is because it fragments existing meadows and ultimately reduces their resilience to other stressors. Boat moorings are prevalent in seagrass globally and it is likely this impairs their ecosystem functioning. Given the extensive ecosystem service value of seagrasses in terms of factors such as carbon storage and fish habitat such loss is of cause for concern. This indicates the need for the widespread use of seagrass friendly mooring systems in and around

Multi-purpose hull

International Nuclear Information System (INIS)

Taylor, W.C.; Horgan, J.B.G.; Downie, D.M.

1982-01-01

An 18 sided hull approximately 4 metres in diameter formed in prefabricated watertight sections from GRP has been designed for burying underground to withstand an overpressure of 12P.S.I above normal atmospheric pressure for human protection against a nuclear explosion and resultant radioactivity. The pre-fabricated sections are so designed to be stacked together prior to assembling and the assembled hulls can also be stacked together both vertically and horizontally in a honeycomb formation to form a multiple chamber. (author)

46 CFR 151.10-1 - Barge hull classifications.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Barge hull classifications. 151.10-1 Section 151.10-1... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Barge Hull Construction Requirements § 151.10-1 Barge hull classifications. (a) Each barge constructed or converted in conformance with this subpart shall be assigned a hull...

Round-trip boat on hydrogen

International Nuclear Information System (INIS)

Berends, A.M.; Van der Laag, P.C.

2005-08-01

The results of a feasibility study on a PEM (polymer-electrolyte membrane) fuel cell (FC) driven electric round-trip boat are presented and discussed. The study concerns the specification of a PEMFC system design, including a list of components. Also technical and environmental aspects are dealt with and compared with traditional battery-driven electric boats and diesel-driven boats [nl

46 CFR 45.153 - Through-hull piping: General.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Through-hull piping: General. 45.153 Section 45.153... Conditions of Assignment § 45.153 Through-hull piping: General. (a) All through-hull pipes required by this subpart must be made of steel or material equivalent to the hull in strength and fatigue resistance. (b...

Wave induced extreme hull girder loads on containerships

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher; Pedersen, Preben Terndrup; Shi, Bill

2009-01-01

This paper provides simple but rational procedures for prediction of extreme wave – induced sectional hull girder forces with reasonable engineering accuracy. The procedures take into account main ship hull characteristics such as: length, breadth, draught, block coefficient, bow flare coefficient......, forward speed and hull flexibility. The vertical hull girder loads are evaluated for specific operational profiles. Firstly a quadratic strip theory is presented which can give separate predictions for the hogging and sagging bending moments and shear forces and for hull girder loads. Then this procedure...... is based on rational methods it can be applied for novel single hull ship types not presently covered by the rules of the classification societies or to account for specific operational profiles....

46 CFR 154.516 - Piping: Hull protection.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Hull protection. 154.516 Section 154.516 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.516 Piping: Hull protection. A vessel's hull must be protected from...

Rocking the boat: damage to eelgrass by swinging boat moorings

OpenAIRE

Unsworth, Richard K. F.; Williams, Beth; Jones, Benjamin L.; Cullen-Unsworth, Leanne

2017-01-01

Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass) is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carb...

RANS simulation of cavitation and hull pressure fluctuation for marine propeller operating behind-hull condition

Science.gov (United States)

Paik, Kwang-Jun; Park, Hyung-Gil; Seo, Jongsoo

2013-12-01

Simulations of cavitation flow and hull pressure fluctuation for a marine propeller operating behind a hull using the unsteady Reynolds-Averaged Navier-Stokes equations (RANS) are presented. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. Simulations are performed in design and ballast draught conditions to study the effect of cavitation number. And two propellers with slightly different geometry are simulated to validate the detectability of the numerical simulation. All simulations are performed using a commercial CFD software FLUENT. Cavitation patterns of the simulations show good agreement with the experimental results carried out in Samsung CAvitation Tunnel (SCAT). The simulation results for the hull pressure fluctuation induced by a propeller are also compared with the experimental results showing good agreement in the tendency and amplitude, especially, for the first blade frequency.

46 CFR 91.25-25 - Hull equipment.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull equipment. 91.25-25 Section 91.25-25 Shipping COAST... CERTIFICATION Inspection for Certification § 91.25-25 Hull equipment. (a) At each inspection for certification and periodic inspection, the inspectors shall conduct the following tests and inspections of hull...

46 CFR 189.25-25 - Hull equipment.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull equipment. 189.25-25 Section 189.25-25 Shipping... CERTIFICATION Inspection for Certification § 189.25-25 Hull equipment. (a) At each inspection for certification and periodic inspection the inspector shall conduct the following tests and inspections of hull...

46 CFR 45.107 - Strength of hull.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Strength of hull. 45.107 Section 45.107 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Conditions of Assignment § 45.107 Strength of hull. The general structural strength of the hull must be sufficient for the...

46 CFR 71.25-25 - Hull equipment.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Hull equipment. 71.25-25 Section 71.25-25 Shipping COAST... Inspection § 71.25-25 Hull equipment. (a) At each annual inspection, the inspector shall conduct the following tests and inspections of hull equipment: (1) All subdivision bulkheads shall be examined to...

46 CFR 111.05-11 - Hull return.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull return. 111.05-11 Section 111.05-11 Shipping COAST... REQUIREMENTS Equipment Ground, Ground Detection, and Grounded Systems § 111.05-11 Hull return. (a) A vessel's hull must not carry current as a conductor except for the following systems: (1) Impressed current...

RANS simulation of cavitation and hull pressure fluctuation for marine propeller operating behind-hull condition

Directory of Open Access Journals (Sweden)

Kwang-Jun Paik

2013-12-01

Full Text Available Simulations of cavitation flow and hull pressure fluctuation for a marine propeller operating behind a hull using the unsteady Reynolds-Averaged Navier-Stokes equations (RANS are presented. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. Simulations are performed in design and ballast draught conditions to study the effect of cavitation number. And two propellers with slightly different geometry are simulated to validate the detectability of the numerical simulation. All simulations are performed using a commercial CFD software FLUENT. Cavitation patterns of the simulations show good agreement with the experimental results carried out in Samsung CAvitation Tunnel (SCAT. The simulation results for the hull pressure fluctuation induced by a propeller are also compared with the experimental results showing good agreement in the tendency and amplitude, especially, for the first blade frequency.

46 CFR 133.140 - Stowage of rescue boats.

Science.gov (United States)

2010-10-01

... SYSTEMS Requirements for All OSVs § 133.140 Stowage of rescue boats. (a) Rescue boats must be stowed as follows: (1) Each rescue boat must be ready for launching in not more than 5 minutes. (2) Each rescue boat... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of rescue boats. 133.140 Section 133.140...

Effective Hull IMMR plan

Energy Technology Data Exchange (ETDEWEB)

Franco, Mireille

2010-07-01

The objective of the Hull Inspection, Maintenance and Repair Plan is to ensure the total integrity of the Floating Production Unit. To be efficient, the Monitoring has to be part of the Hull Inspection, Monitoring, Maintenance and Repair Plan (IMMR). The IMMR Plan should be developed during the design and project phases and take into account the interfaces between the different systems and teams' tasks in operation. The IMMR is multidisciplinary and form part of the hand-over to ensure an efficient and early implementation. Implementation of such a complex plan requires: - Cross-functionality: take advantage of the synergies - Boldness: break the mould and think outside the box - Listening: be attentive, be available, - Mutual support: during good and bad times. This paper presents the way Total believe the Hull IMMR Plan shall be developed, implemented and followed up. (Author)

A new approach to hull consistency

Directory of Open Access Journals (Sweden)

Kolev Lubomir

2016-06-01

Full Text Available Hull consistency is a known technique to improve the efficiency of iterative interval methods for solving nonlinear systems describing steady-states in various circuits. Presently, hull consistency is checked in a scalar manner, i.e. successively for each equation of the nonlinear system with respect to a single variable. In the present poster, a new more general approach to implementing hull consistency is suggested which consists in treating simultaneously several equations with respect to the same number of variables.

46 CFR 133.135 - Rescue boats.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Rescue boats. 133.135 Section 133.135 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.135 Rescue boats. (a) Each OSV must carry at least one rescue boat. Each rescue...

46 CFR 154.178 - Contiguous hull structure: Heating system.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Heating system. 154.178... Equipment Hull Structure § 154.178 Contiguous hull structure: Heating system. The heating system for transverse and longitudinal contiguous hull structure must: (a) Be shown by a heat load calculation to have...

14 CFR 29.757 - Hull and auxiliary float strength.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and auxiliary float strength. 29.757... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.757 Hull and auxiliary float strength. The hull, and auxiliary floats if used, must withstand the...

Estimation of gamma dose rate from hulls and shield design for the hull transport cask of Fuel Reprocessing Plant (FRP)

International Nuclear Information System (INIS)

Chandrasekaran, S.; Rajagopal, V.; Jose, M.T.; Venkatraman, B.

2012-01-01

In Fuel Reprocessing Plant (FRP), un-dissolved clad of fuel pins known as hulls are the major sources of high level solid waste. Safe handling, transport and disposal require the estimation of radioactivity as a consequent of gamma dose rate from hulls in fast reactor fuel reprocessing plant in comparison with thermal reactor fuel. Due to long irradiation time and low cooling of spent fuel, the evolution of activation products 51 Cr, 58 Co, 54 Mn and 59 Fe present as impurities in the fuel clad are the major sources of gamma radiation. Gamma dose rate from hull container with hulls from Fuel Sub Assembly (FSA) and Radial Sub Assembly (RSA) of Fuel Reprocessing Plant (FRP) was estimated in order to design the hull transport cask. Shielding computations were done using point kernel code, IGSHIELD. This paper describes the details of source terms, estimation of dose rate and shielding design of hull transport cask in detail. (author)

46 CFR 199.202 - Rescue boats.

Science.gov (United States)

2010-10-01

... SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Passenger Vessels § 199.202 Rescue boats... 46 Shipping 7 2010-10-01 2010-10-01 false Rescue boats. 199.202 Section 199.202 Shipping COAST... least one rescue boat approved under approval series 160.156 that is equipped as specified in table 199...

46 CFR 32.75-5 - Hull requirements; general-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Hull requirements; general-TB/ALL. 32.75-5 Section 32.75..., AND HULL REQUIREMENTS Hull Requirements for Wood Hull Tank Vessels Constructed Prior to November 10, 1936 § 32.75-5 Hull requirements; general—TB/ALL. The scantlings, material, and workmanship, and the...

46 CFR 32.70-5 - Hull requirements; general-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Hull requirements; general-TB/ALL. 32.70-5 Section 32.70..., AND HULL REQUIREMENTS Hull Requirements for Steel Hull Tank Vessels Constructed Prior to November 10, 1936 § 32.70-5 Hull requirements; general—TB/ALL. The scantlings, material, and workmanship, the...

Heat-treated hull flour does not affect iron bioavailability in rats.

Science.gov (United States)

Martino, Hércia Stampini Duarte; Carvalho, Ariela Werneck de; Silva, Cassiano Oliveira da; Dantas, Maria Inês de Souza; Natal, Dorina Isabel Gomes; Ribeiro, Sônia Machado Rocha; Costa, Neuza Maria Brunoro

2011-06-01

In this study the chemical composition and iron bioavailability of hull and hull-less soybean flour from the new cultivar UFVTN 105AP was evaluated. The hemoglobin depletion-repletion method was used in Wistar rats. Soybean hull flour presented 37% more total dietary fiber and higher content of iron than hull-less soybean flour. The phytate:iron molar ratio, however, was 2-fold lower in the soybean hull flour in compared to the hull-less soybean flour. Animals fed soybean hull flour presented hemoglobin gains similar to those of the control diet group (p > 0.05). The Relative Biological Values of hull and hull-less soybean flour were 68.5% and 67.1%, respectively, compared to the control group. Heat-treated soybean hull flour (150 degrees C/30 minutes) showed high content of iron and low phytate, which favors the iron bioavailability. Thus, the soybean hull flour is a better source of dietary fiber and iron than hull-less soybean flour at comparable bioavailabilities.

46 CFR 154.188 - Membrane tank: Inner hull steel.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Membrane tank: Inner hull steel. 154.188 Section 154.188... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Hull Structure § 154.188 Membrane tank: Inner hull steel. For a vessel with membrane tanks, the inner hull...

CFD simulation on Kappel propeller with a hull wake field

DEFF Research Database (Denmark)

Shin, Keun Woo; Andersen, Poul; Møller Bering, Rasmus

2013-01-01

Marine propellers are designed not for the open-water operation, but for the operation behind a hull due to the inhomogeneous hull wake and thrust deduction. The adaptation for the hull wake is important for the propulsive efficiency and cavitation risk especially on single-screw ships. CFD...... simulations for a propeller with a hull model have showed acceptable agreement with a model test result in the thrust and torque (Larsson et al. 2010). In the current work, a measured hull wake is applied to the simulation instead of modelling a hull, because the hull geometry is mostly not available...... for propeller designers and the computational effort can be reduced by excluding the hull. The CFD simulation of a propeller flow with a hull wake is verified in order to use CFD as a propeller design tool. A Kappel propeller, which is an innovative tip-modified propeller, is handled. Kappel propellers...

46 CFR 154.180 - Contiguous hull structure: Welding procedure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Welding procedure. 154.180... Equipment Hull Structure § 154.180 Contiguous hull structure: Welding procedure. Welding procedure tests for contiguous hull structure designed for a temperature colder than −18 °C (0 °F) must meet § 54.05-15 and...

Strength Tests on Hulls and Floats

Science.gov (United States)

Matthaes, K

1942-01-01

The present report deals with strength tests on hulls and floats intended in part for the collection of construction data for the design of these components and in part for the stress analysis of the finished hulls and floats.

Dual long memory of inflation and test of the relationship between inflation and inflation uncertainty

OpenAIRE

LIU Jinquan; ZHENG Tingguo; SUI Jianli

2008-01-01

This paper uses the ARFIMA-FIGARCH model to investigate the China¡¯s monthly inflation rate from January 1983 to October 2005. It is found that both first moment and second moment of inflation have remarkable long memory, indicating the existence of long memory properties in both inflation level and inflation uncertainty. By the Granger-causality test on inflation rate and inflation uncertainty, it is shown that the inflation level affects the inflation uncertainty and so supports Friedman hy...

Feasibility of using Big Area Additive Manufacturing to Directly Manufacture Boat Molds

Energy Technology Data Exchange (ETDEWEB)

Post, Brian K. [ORNL; Chesser, Phillip C. [ORNL; Lind, Randall F. [ORNL; Sallas, Matthew R. [ORNL; Love, Lonnie J. [ORNL

2018-01-01

The goal of this project was to explore the feasibility of using Big Area Additive Manufacturing (BAAM) to directly manufacture a boat mold without the need for coatings. All prior tooling projects with BAAM required the use to thick coatings to overcome the surface finish limitations of the BAAM process. While the BAAM process significantly lowers the cost of building the mold, the high cost element rapidly became the coatings (cost of the material, labor on coating, and finishing). As an example, the time and cost to manufacture the molds for the Wind Turbine project with TPI Composites Inc. and the molds for the submarine project with Carderock Naval Warfare Systems was a fraction of the time and cost of the coatings. For this project, a catamaran boat hull mold was designed, manufactured, and assembled with an additional 0.15” thickness of material on all mold surfaces. After printing, the mold was immediately machined and assembled. Alliance MG, LLC (AMG), the industry partner of this project, experimented with mold release agents on the carbon-fiber reinforced acrylonitrile butadiene styrene (CF ABS) to verify that the material can be directly used as a mold (rather than needing a coating). In addition, for large molds (such as the wind turbine mold with TPI Composites Inc.), the mold only provided the target surface. A steel subframe had to be manufactured to provide structural integrity. If successful, this will significantly reduce the time and cost necessary for manufacturing large resin infusion molds using the BAAM process.

46 CFR 252.33 - Hull and machinery insurance.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 252.33 Section 252.33... Subsidy Rates § 252.33 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and machinery, increased value, excess general average...

Inflation persistence in African countries: Does inflation targeting matter?

OpenAIRE

Phiri, Andrew

2016-01-01

This study investigates inflation persistence in annual CPI inflation collected between 1994 and 2014 for 46 African countries. We group these countries into panels according to whether they are inflation targeters or not and conduct estimations for pre and post inflation targeting periods. Interestingly enough, we find that inflation persistence was much higher for inflation targeters in periods before adopting their inflation targeting regimes and inflation persistence dropped by 40 percent...

Approximate convex hull of affine iterated function system attractors

International Nuclear Information System (INIS)

Mishkinis, Anton; Gentil, Christian; Lanquetin, Sandrine; Sokolov, Dmitry

2012-01-01

Highlights: ► We present an iterative algorithm to approximate affine IFS attractor convex hull. ► Elimination of the interior points significantly reduces the complexity. ► To optimize calculations, we merge the convex hull images at each iteration. ► Approximation by ellipses increases speed of convergence to the exact convex hull. ► We present a method of the output convex hull simplification. - Abstract: In this paper, we present an algorithm to construct an approximate convex hull of the attractors of an affine iterated function system (IFS). We construct a sequence of convex hull approximations for any required precision using the self-similarity property of the attractor in order to optimize calculations. Due to the affine properties of IFS transformations, the number of points considered in the construction is reduced. The time complexity of our algorithm is a linear function of the number of iterations and the number of points in the output approximate convex hull. The number of iterations and the execution time increases logarithmically with increasing accuracy. In addition, we introduce a method to simplify the approximate convex hull without loss of accuracy.

Procurement guideline for oil recovery boats; Oeljyntorjuntaveneen hankintaohje

Energy Technology Data Exchange (ETDEWEB)

Pajala, J.

2011-12-15

These guidelines have been compiled to assist in the procurement of oil recovery boats, with the intention of ensuring that new boats meet the future needs of oil spill response operations and that procurement will be carried out in a manner that is economically sound and technologically well-founded. Furthermore, the guidelines are intended to encourage the development and adoption of new solutions for oil recovery boats. The issues covered by these guidelines include: Multiple uses of boats, classification of boats and class-specific requirements, the principle of sustainable development and the boats' lifecycle, qualification to be set for the crews, procurement timeline, regulations and guidelines, inspections and approvals. (orig.)

Experiment and numerical simulation on the characteristics of fluid–structure interactions of non-rigid airships

Directory of Open Access Journals (Sweden)

Xiaocui Wu

2015-11-01

Full Text Available Fluid–structure interaction is an important issue for non-rigid airships with inflated envelopes. In this study, a wind tunnel test is conducted, and a loosely coupled procedure is correspondingly established for numerical simulation based on computational fluid dynamics and nonlinear finite element analysis methods. The typical results of the numerical simulation and wind tunnel experiment, including the overall lift and deformation, are in good agreement with each other. The results obtained indicate that the effect of fluid–structure interaction is noticeable and should be considered for non-rigid airships. Flow-induced deformation can further intensify the upward lift force and pitching moment, which can lead to a large deformation. Under a wind speed of 15 m/s, the lift force of the non-rigid model is increased to approximately 60% compared with that of the rigid model under a high angle of attack.

Global Loads on FRP Ship Hulls

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup

1997-01-01

Fibre reinforced plastic (FRP) composites used for high-speed vessels have lower modulus of elasticity than the conventionally used steels.Therefore, for large fast ships the lowest natural frequencies of the global hull modes can be relatively low compared to the frequency of waveencounter....... As part of the NoKoS project it was decided to investigate the effect of hull flexibility on the wave-induced as well as accidental structural loads on high-speed ships.Especially it was decided to determine whether there is an upper size of FRP and aluminium mono-hulls caused by continuous wave action...

46 CFR 154.170 - Outer hull steel plating.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Outer hull steel plating. 154.170 Section 154.170... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Hull Structure § 154.170 Outer hull steel plating. (a) Except as required in paragraph (b) of this section, the...

46 CFR 154.172 - Contiguous steel hull structure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous steel hull structure. 154.172 Section 154.172... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Hull Structure § 154.172 Contiguous steel hull structure. (a) Except as allowed in paragraphs (b) and (c) of this...

46 CFR 282.23 - Hull and machinery insurance.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 282.23 Section 282.23... COMMERCE OF THE UNITED STATES Calculation of Subsidy Rates § 282.23 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and machinery...

46 CFR 71.50-29 - Hull examination reports.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Hull examination reports. 71.50-29 Section 71.50-29... CERTIFICATION Drydocking § 71.50-29 Hull examination reports. (a) If you use only divers for the underwater survey portion of the Alternative Hull Examination (AHE), you must provide the Officer in Charge, Marine...

46 CFR 71.50-1 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 71.50-1... INSPECTION AND CERTIFICATION Drydocking § 71.50-1 Definitions relating to hull examinations. As used in this part— Adequate hull protection system means a method of protecting the vessel's hull from corrosion. It...

PRICE RIGIDITY AND MONETARY NON-NEUTRALITY IN DEVELOPING COUNTRIES: EVIDENCE FROM NIGERIA

Directory of Open Access Journals (Sweden)

Nathaniel E. Urama

2013-04-01

Full Text Available In an attempt to find out the degree of monetary non-neutrality in Nigeria we started from finding out the size of price rigidity in the country. Computation with Ball and Romer method showed that price rigidity is optimal decision for firms in Nigeria only when the menu cost is well above 2.28% of the firm’s revenue which is on the high side, showing the likelihood of weak price rigidity in the country. Confirming this, the IRFs of the SVAR shows that the response of inflation to nominal shock has only one period lag. These combined results led to a small though persistent response of output to the nominal shock. The result of the study therefore points towards large nominal and small real effect of monetary policy in Nigeria and conclude that monetary policy will be a better option for contractionary plan but not for an expansionary plan.

46 CFR 185.602 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 185.602 Section 185.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.602 Hull markings. (a) Each vessel must be marked as required by part 67...

46 CFR 122.602 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 122.602 Section 122.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150....602 Hull markings. (a) Each vessel must be marked as required by part 67, subpart I, of this chapter...

76 FR 30495 - National Safe Boating Week, 2011

Science.gov (United States)

2011-05-25

... precautions and sensible behavior when spending time on the water. Safe boating is responsible boating. Individuals can prepare for excursions by taking boating safety courses and filing float plans with family...

46 CFR 32.63-5 - Barge hull classifications-B/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Barge hull classifications-B/ALL. 32.63-5 Section 32.63..., AND HULL REQUIREMENTS Hull and Cargo Tank Requirements for Tank Barges Constructed or Converted On or After July 1, 1964, and Carrying Certain Dangerous Bulk Cargoes § 32.63-5 Barge hull classifications—B...

Do inflation-linked bonds contain information about future inflation?

Directory of Open Access Journals (Sweden)

José Valentim Machado Vicente

2013-06-01

Full Text Available There is a widespread belief that inflation-linked bonds are a direct source of information about inflation expectations. In this paper we address this issue by analyzing the relationship between break-even inflation (the difference between nominal and real yields and future inflation. The dataset is extracted from Brazilian Treasury bonds covering the period from April 2005 to April 2011. We find that break-even inflation is an unbiased forecast only of the 3-month and 6-month ahead inflation. For medium horizons (12 and 18 months, break-even inflation has weak explanatory power of future inflation. Over long horizons (24 and 30 months, we report a significant, but counterintuitive, negative relationship between the break-even and realized inflation rates.

Region-of-interest volumetric visual hull refinement

KAUST Repository

Knoblauch, Daniel; Kuester, Falko

2010-01-01

This paper introduces a region-of-interest visual hull refinement technique, based on flexible voxel grids for volumetric visual hull reconstructions. Region-of-interest refinement is based on a multipass process, beginning with a focussed visual

14 CFR 23.533 - Hull and main float bottom pressures.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float bottom pressures. 23... Water Loads § 23.533 Hull and main float bottom pressures. (a) General. The hull and main float....00213; K2=hull station weighing factor, in accordance with figure 2 of appendix I of this part; VS1...

46 CFR 154.182 - Contiguous hull structure: Production weld test.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Production weld test. 154.182... Equipment Hull Structure § 154.182 Contiguous hull structure: Production weld test. If a portion of the contiguous hull structure is designed for a temperature colder than −34 °C (−30 °F) and is not part of the...

Morphologically intelligent underactuated robot for underwater hull cleaning

DEFF Research Database (Denmark)

Souto, Daniel; Faina, Andres; López-Peña, Fernando

2015-01-01

In this paper we discuss a new type of robot for underwater hull cleaning on ships with non-magnetic hulls. This robot is based on the concept that cleaning hulls regularly, without waiting to take them out of the water, will improve the efficiency of the ships and will permit a reduction...... in the use of the chemicals that are usually employed to prevent the growth of marine life on the hull and which are generally harmful to the environment. The robot described in this paper is an underactuated morphologically adapted robot that through an appropriate morphology and making use of the forces...... and constraints of the environment solves the most difficult problems that arise when moving along hulls. Some of these are changing planes, negotiating appendices, avoiding portholes, passing corners, and other elements. This greatly simplifies the control mechanisms that are required for its operation making...

Inflation and Inflation Uncertainty Revisited: Evidence from Egypt

Directory of Open Access Journals (Sweden)

Mesbah Fathy Sharaf

2015-07-01

Full Text Available The welfare costs of inflation and inflation uncertainty are well documented in the literature and empirical evidence on the link between the two is sparse in the case of Egypt. This paper investigates the causal relationship between inflation and inflation uncertainty in Egypt using monthly time series data during the period January 1974–April 2015. To endogenously control for any potential structural breaks in the inflation time series, Zivot and Andrews (2002 and Clemente–Montanes–Reyes (1998 unit root tests are used. The inflation–inflation uncertainty relation is modeled by the standard two-step approach as well as simultaneously using various versions of the GARCH-M model to control for any potential feedback effects. The analyses explicitly control for the effect of the Economic Reform and Structural Adjustment Program (ERSAP undertaken by the Egyptian government in the early 1990s, which affected inflation rate and its associated volatility. Results show a high degree of inflation–volatility persistence in the response to inflationary shocks. Granger-causality test along with symmetric and asymmetric GARCH-M models indicate a statistically significant bi-directional positive relationship between inflation and inflation uncertainty, supporting both the Friedman–Ball and the Cukierman–Meltzer hypotheses. The findings are robust to the various estimation methods and model specifications. The findings of this paper support the view of adopting inflation-targeting policy in Egypt, after fulfilling its preconditions, to reduce the welfare cost of inflation and its related uncertainties. Monetary authorities in Egypt should enhance the credibility of monetary policy and attempt to reduce inflation uncertainty, which will help lower inflation rates.

Flaxseed hull: Chemical composition and antioxidant activity during development.

Science.gov (United States)

Herchi, Wahid; Al Hujaili, Abdullah D; Sakouhi, Faouzi; Sebei, Khaled; Trabelsi, Hajer; Kallel, Habib; Boukhchina, Sadok

2014-01-01

Changes in the chemical composition and antioxidant activity of flaxseed hull during maturation were investigated. P129 hull variety was studied at four maturation stages (St1, St2, St3, and St4). Significant variation in proximate composition and flaxseed hull oil characteristics were observed. A significant increase in the carbohydrates content of the hull was observed during development. The main methyl esters were linolenic acid (48.95 - 51.52 %), oleic acid (20.27-23.41%) and linoleic acid (15.62-17.70%). The highest polyunsaturated fatty acids (PUFA) were found to be 67.14 % at the first stage of maturity (St1). Flaxseed hull oil was of good quality, containing an abundance of omega-3 essential fatty acids. The iodine value increased, while the saponification value of oil decreased during seed development. The decrease in ascorbic acid content was steady. The maximum level of total phenolic acid content (128.3 mg/100 g oil) was reached at 7 DAF. The antioxidant activity of oilseed was assessed by means of 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging assay. Radical scavenging activity for green hull was 52.74% and mature hull was 69.32%.

Inflation from field theory and string theory perspectives. Matter inflation and slow-walking inflation

International Nuclear Information System (INIS)

Halter, Sebastian

2012-01-01

This thesis is concerned with aspects of inflation both from a field theory and a string theory perspective. It aims at exploring new approaches to address the problem of moduli destabilization and the η-problem and to realize inflation in the matter sector. The first part is devoted to studying models of inflation in the framework of four-dimensional N=1 supergravity. We begin with investigating a new proposal to solve the problem of moduli destabilization, which seems to force us to choose between low-energy supersymmetry and high-scale inflation. This new approach is based on a particular way to couple the modulus to the F-term driving inflation. Using chaotic inflation with a shift symmetry as an example, we show that we can successfully combine low-energy supersymmetry and high-scale inflation. We construct a class of inflation models in N=1 supergravity where the inflaton resides in gauge non-singlet matter fields. These are extensions of a special class of hybrid inflation models, so-called tribrid inflation, where the η-problem can be solved by a Heisenberg symmetry. Compared to previously studied models, we have generalized our models with some inspiration from string theory. We investigate moduli stabilization during inflation and identify situations in which the inflaton slope is dominated by radiative corrections. We outline under which conditions this class of matter inflation models could be embedded into heterotic orbifold compactifications. In doing so, we suggest a new mechanism to stabilize some Kaehler moduli by F-terms for matter fields. In the second part, we consider models of warped D-brane inflation on a family of ten-dimensional supergravity backgrounds. We consider inflation along the radial direction near the tip of the warped throat and show that generically an inflection point arises for the inflaton potential, which is related to an inflection point of the dilaton profile. A universal scaling behaviour with the parameters of the

Inflation from field theory and string theory perspectives. Matter inflation and slow-walking inflation

Energy Technology Data Exchange (ETDEWEB)

Halter, Sebastian

2012-07-09

This thesis is concerned with aspects of inflation both from a field theory and a string theory perspective. It aims at exploring new approaches to address the problem of moduli destabilization and the η-problem and to realize inflation in the matter sector. The first part is devoted to studying models of inflation in the framework of four-dimensional N=1 supergravity. We begin with investigating a new proposal to solve the problem of moduli destabilization, which seems to force us to choose between low-energy supersymmetry and high-scale inflation. This new approach is based on a particular way to couple the modulus to the F-term driving inflation. Using chaotic inflation with a shift symmetry as an example, we show that we can successfully combine low-energy supersymmetry and high-scale inflation. We construct a class of inflation models in N=1 supergravity where the inflaton resides in gauge non-singlet matter fields. These are extensions of a special class of hybrid inflation models, so-called tribrid inflation, where the η-problem can be solved by a Heisenberg symmetry. Compared to previously studied models, we have generalized our models with some inspiration from string theory. We investigate moduli stabilization during inflation and identify situations in which the inflaton slope is dominated by radiative corrections. We outline under which conditions this class of matter inflation models could be embedded into heterotic orbifold compactifications. In doing so, we suggest a new mechanism to stabilize some Kaehler moduli by F-terms for matter fields. In the second part, we consider models of warped D-brane inflation on a family of ten-dimensional supergravity backgrounds. We consider inflation along the radial direction near the tip of the warped throat and show that generically an inflection point arises for the inflaton potential, which is related to an inflection point of the dilaton profile. A universal scaling behaviour with the parameters of the

Preparation and characterization of rice hull silica products

International Nuclear Information System (INIS)

Quirit, Leni L.; Llaguno, Elma C.; Pagdanganan, Fernando C.; Hernandez, Karen N.

2008-01-01

Rice hull is an abundant agricultural waste material which could be a renewable energy source when combusted. The combustion residue (called rice hull ash or RHA) contains a significant amount (20% of the hull) of potentially high grade silica. Silica gels prepared from rice hull were found to have properties comparable to two commercial desiccant silica gels (Blue Merck and FNG-A) in terms of chemical and amorphous structure, surface area, desiccant characteristics, microstructure and heats of adsorption. These properties were determined from water vapor adsorption measurements, electron microscopy, and from infrared and x-ray diffraction spectra. The acid treated rice hull gels were found to have fewer elemental impurities detected by qualitative x-ray fluorescence, compared to the commercial gels. Thermogravimetric analysis (TGA) data showed that this technique can also be used to indirectly compare impurity levels in the samples, in terms of the amorphous to crystalline phase transition. Using an improved acid treatment method, a silica gel sample was prepared from rice hull and compared to three commercial chromatographic silica gels using quantitative elemental x-ray fluorescence analysis. Elemental levels in the rice hull gel were within the range of levels or close to the detection limits of corresponding elements in the chromatographic gels. Water vapor adsorption, x-ray diffraction, infrared spectroscopy and scanning electron microscopy showed that the rice hull gel was similar to the commercial chromatographic silica gel Davison 12. Zeolites are crystalline aluminosilicates used as molecular sieves for purification and catalytic purposes. Zeolites X and Y were synthesized from rice hull silica gel and aluminum hydroxide. For comparison, controls were synthesized from commercial silica gel. The samples and controls exhibited characteristics infrared peaks corresponding to the vibrations of the TO 4 (T=Si, Al) of the zeolite framework. The x

Inflation, its Volatility and the Inflation-Growth Tradeoff in India

OpenAIRE

Raghbendra Jha; Varsha S. Kulkarni

2013-01-01

This paper amends the New Keynesian Phillips curve model to include inflation volatility. It provides results on the determinants of inflation volatility and expected inflation volatility for OLS and ARDL(1,1) models and for change in inflation volatility and change in expected inflation volatility using ECM models. Output gap affects change in expected inflation volatility alone (in the ECM model) and not in the other models. Major determinants of inflation volatility and expected inflation ...

The market introduction of solar boats

International Nuclear Information System (INIS)

Brandsma, M.

1997-01-01

There is a large potential (50 MWp) for photovoltaic electrically-driven boats in the Netherlands. A brief overview is given of the results of solar boat demonstration projects in the Netherlands so far

Towards a formal link between inflation perceptions and inflation ...

African Journals Online (AJOL)

This paper reports the finding of a survey of inflation perceptions and inflation expectations in South Africa undertaken in 2014. This survey posed questions on perceptions of past inflation (historic inflation) and expectations of future inflation to the same respondents and determined linkages between historic views and ...

46 CFR 308.107 - War risk hull insurance policy.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false War risk hull insurance policy. 308.107 Section 308.107 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Hull and Disbursements Insurance § 308.107 War risk hull insurance policy. Standard Form MA-240...

Calculation of Flows Over Underwater Bodies with Hull, Sail and Appendages

International Nuclear Information System (INIS)

Shoab, M.; Ayub, M.; Bilal, S.; Zahir, S.; Khan, M.A.

2004-01-01

A comprehensive study has been made for the hydrodynamic analysis of the submarine DARPA 2. The analysis was first performed for hull, then hull with sail on top and then for the complete submarine including hull, sail and appendages. A comparison of tangential velocity and pressure distribution for hull is accomplished using CFD flow solvers and published data. Further, the pressure distribution over the hull with sail is also analyzed. Finally, pressure distribution, forces and moments were calculated over the complete submarine including hull, sail and appendages. Comparison 01 pressure distribution and tangential velocity for the hull show a good agreement with published data. Pressure coefficient comparison for the hull with sail shows the good CFD-CFD agreement. Comparison of Normal force and pitching moment of complete submarine having hull, sail and appendages shows a reasonable agreement with the experimental results of DARPA 2. Both quantitative and qualitative analysis of the complete submarine estimates the required design force and moment at different angles of attack and also demonstrate the flow visualization. (author)

Apparatus for unloading nuclear fuel pellets from a sintering boat

International Nuclear Information System (INIS)

Bucher, G.D.; Raymond, T.E.

1987-01-01

An apparatus is described for unloading nuclear fuel pellets from a loaded sintering boat having an open top, comprising: (a) means for receiving the boat in an upright position with the pellets contained therein, the boat receiving means including a platform for supporting the loaded boat in the upright position, the boat supporting platform having first and second portions; (b) means for clamping the boat including a pair of plates disposed at lateral sides of the boat and being movable in a first direction relative to one another for applying clamping forces to the boat on the platform and in a second direction relative to one another for releasing the clamping forces from the boat. The pair of plates have inner surfaces facing toward one another, the first and second platform portions of the boat supporting platform being mounted to the plates on the respective facing surfaces thereof and disposed in a common plane. One of the plates and one of the platform portions mounted thereto are disposed in a stationary position and the other of the plates and the other of the platform portions mounted thereto are movable relative thereto in the first and second directions for applying and releasing clamping forces to and from the boat while the boat is supported in the upright position by the platform portions; (c) means for transferring the clamped boat from the upright position to an inverted position and then back to the upright position; and (d) means of receiving the pellets from the clamped boat as the boat is being transferred from the upright position to the inverted position

46 CFR 169.231 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 169.231... hull examinations. As used in the part— (a) Drydock examination means hauling out a vessel or placing a... and all through-hull fittings, sea chests, sea valves, sea strainers, and valves for the emergency...

Inflation Volatility and the Inflation-Growth Tradeoff in India

OpenAIRE

Raghbendra Jha; Varsha S. Kulkarni

2012-01-01

This paper amends the New Keynesian Phillips curve model to include inflation volatility and tests the determinants of such volatility for India. It provides results on the determinants of inflation volatility and expected inflation volatility for OLS and ARDL (1,1) models and for change in inflation volatility and change in expected inflation volatility using ECM models. Output gap affects change in expected inflation volatility along (in the ECM model) and not in the other models. Major det...

Eternal hilltop inflation

International Nuclear Information System (INIS)

Barenboim, Gabriela; Park, Wan-Il; Kinney, William H.

2016-01-01

We consider eternal inflation in hilltop-type inflation models, favored by current data, in which the scalar field in inflation rolls off of a local maximum of the potential. Unlike chaotic or plateau-type inflation models, in hilltop inflation the region of field space which supports eternal inflation is finite, and the expansion rate H EI during eternal inflation is almost exactly the same as the expansion rate H * during slow roll inflation. Therefore, in any given Hubble volume, there is a finite and calculable expectation value for the lifetime of the ''eternal'' inflation phase, during which quantum flucutations dominate over classical field evolution. We show that despite this, inflation in hilltop models is nonetheless eternal in the sense that the volume of the spacetime at any finite time is exponentially dominated by regions which continue to inflate. This is true regardless of the energy scale of inflation, and eternal inflation is supported for inflation at arbitrarily low energy scale.

46 CFR 115.630 - The Alternative Hull Examination (AHE) Program application.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false The Alternative Hull Examination (AHE) Program... PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.630 The Alternative Hull... hull examination date to the Officer in Charge, Marine Inspection (OCMI) who will oversee the survey...

46 CFR 32.63-20 - Hull structure-B/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Hull structure-B/ALL. 32.63-20 Section 32.63-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Hull and Cargo Tank Requirements for Tank Barges Constructed or Converted On or After July 1, 1964...

Evaluation of the biological activity of sunflower hull extracts

Energy Technology Data Exchange (ETDEWEB)

Taha, F. S.; Wagdy, S. M.; Hassanein, M. M. M.; Hamed, S. F.

2012-11-01

This work was planned with the aim of adding value to sunflower seed hulls, a waste product of the oil industry by preparing a sunflower hull phenolic extract rich in chlorogenic acid (CGA). In order to fulfill this goal, the optimization for the extraction of a phenolic extract from the hulls was investigated. The parameters studied were: type of solvent, solvent to water ratio and hull to solvent ratio. In addition, the solvent mixtures were also studied. The resulting phenolic extracts were evaluated for their biological activities. This included phenolic content determination, evaluation of the antioxidant and antimicrobial activities. Chlorogenic acid was determined in two chosen hull extracts using the UV spectrophotometric method and HPLC analysis. The anti carcinogenic activity of the two chosen extracts was tested on seven different cell line carcinomas. The results revealed that all the phenolic extracts of sunflower hull studied contain between 190-312.5 mg phenolics/ 100 g hulls. The highest phenolic extraction was achieved with 80% methanol (1:30, hull to solvent, w/v ratio) and methanol to ethanol to water (7:7:6 v/v/v) mixture with values of 312.5 and 306.5 mg phenolics/100 g hulls, respectively. The free radical scavenging activity and antioxidant activity of all the samples ranged from 33.6-72.6%. The highest antioxidant activity and free radical scavenging activity were achieved by the same extracts that possessed the highest phenolic content, namely methanol to ethanol to water extract and 80% methanol with values 71.8 and 72.6%, 68.2 and 70.9% respectively, compared to 77.9 and 76.9% respectively for TBHQ. All the phenolic extracts possessed antimicrobial activity but to different levels against different pathogenic bacteria. The two chosen extracts also possessed anti carcinogenic activity, which differed among varying cell line carcinomas. The HPLC analysis indicated that chlorogenic acid was the main phenolic acid in the extract. Thus it can

Inflation, inflation uncertainty and output growth in the USA

Science.gov (United States)

Bhar, Ramprasad; Mallik, Girijasankar

2010-12-01

Employing a multivariate EGARCH-M model, this study investigates the effects of inflation uncertainty and growth uncertainty on inflation and output growth in the United States. Our results show that inflation uncertainty has a positive and significant effect on the level of inflation and a negative and significant effect on the output growth. However, output uncertainty has no significant effect on output growth or inflation. The oil price also has a positive and significant effect on inflation. These findings are robust and have been corroborated by use of an impulse response function. These results have important implications for inflation-targeting monetary policy, and the aim of stabilization policy in general.

INFLATE: INFlate Landing Apparatus Technology

Science.gov (United States)

Koryanov, V. V. K.; Da-Poian, V. D. P.

2018-02-01

Our project, named INFLATE (INFlatable Landing Apparatus Technology), aims at reducing space landing risks and constraints and so optimizing space missions (reducing cost, mass, and risk and in the same time improving performance).

Inflation Aversion and the Optimal Inflation Tax

OpenAIRE

Gaowang Wang; Heng-fu Zou

2011-01-01

The optimal inflation tax is reexamined in the framework of dynamic second best economy populated by individuals with inflation aversion. A simple formula for the optimal inflation rate is derived. Different from the literature, it is shown that if the marginal excess burden of other distorting taxes approaches zero, Friedman's rule for optimum quantity of money is not optimal, and the optimal inflation tax is negative; if the marginal excess burden of other taxes is nonzero, the optimal infl...

Flavon inflation

International Nuclear Information System (INIS)

Antusch, S.; King, F.S.; Malinsky, M.; Velasco-Sevilla, L.; Zavala, I.

2008-04-01

We propose an entirely new class of particle physics models of inflation based on the phase transition associated with the spontaneous breaking of family symmetry responsible for the generation of the effective quark and lepton Yukawa couplings. We show that the Higgs fields responsible for the breaking of family symmetry, called flavons, are natural candidates for the inflation field in new inflation, or the waterfall fields in hybrid inflation. This opens up a rich vein of possible inflation models, all linked to the physics of flavour, with interesting cosmological and phenomenological implications. Out of these many possibilities we discuss two examples which realise flavon inflation: a model of new inflation based on the discrete non-Abelian family symmetry group A 4 or Δ 27 , and a model of hybrid inflation embedded in an existing flavour model with a continuous SU(3) family symmetry. With the inflation scale and family symmetry breaking scale below the Grand Unification Theory (GUT) scale, these classes of models are free of the monopole (and similar) problems which are often associated with the GUT phase transition. (author)

Estimation of penetration depth of fission products in cladding Hull

International Nuclear Information System (INIS)

Kim, Hee Moon; Jung, Yang Hong; Yoo, Byong Ok; Choo, Yong Sun; Hong, Kwon Pyo

2005-01-01

A disposal and a reprocessing for spent fuel rod with high burnup need de-cladding procedure. Pellet in this rod has been separated from a cladding hull to reduce a radioactivity of hull by chemical and mechanical methods. But fission products and actinides(U,Pu) still remain inside of cladding hull by chemical bonding and fission spike, which is called as 'contamination'. More specific removal of this contamination would have been considered. In this study, the sorts of fission products and penetration depth in hull were observed by EPMA test. To analyze this behavior, SRIM 2000 code was also used as energies of fission products and an oxide thickness of hull

14 CFR 29.519 - Hull type rotorcraft: Water-based and amphibian.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull type rotorcraft: Water-based and... § 29.519 Hull type rotorcraft: Water-based and amphibian. (a) General. For hull type rotorcraft, the... along and among the hull and auxiliary floats, if used, in a rational and conservative manner, assuming...

Swiss fuel cell passenger and pleasure boats

Energy Technology Data Exchange (ETDEWEB)

Affolter, J.-F.

2000-07-01

This paper published by the University of Applied Science in Yverdon-les-Bains, Switzerland, looks at the development of electrically driven small boats that are powered by fuel cells. The various implementations of the test boats are described. Starting with a 100-watt PEM fuel cell built by the Paul Scherrer Institute (PSI) and the University of Applied Science in Solothurn, Switzerland, for educational purposes, a small pedal-boat was electrified. The paper describes the development of four further prototypes and introduces a new project for a 6-passenger leisure boat powered by a 2 kW PEFC fuel cell. Apart from the fuel cells, various other components such as propellers and control electronics are discussed as are the remaining problems still to be solved before the cells and boats can be marketed. Since they were carried out at a technical university, these projects are said to have provided an excellent way of teaching new technologies to students.

Treatment of zircaloy cladding hulls by isostatic pressing

International Nuclear Information System (INIS)

Tegman, R.; Burstroem, M.

1984-12-01

A method for the treatment of Zircaloy fuel hulls is proposed. It involves hot isostatic pressing (HIP) for making large, completely densified metallic bodies of the waste. The hulls are packed into a bellows-shaped container of steel. On packing the fuel hulls give a filling factor of only 14%, which is too low for non-deformable compaction in a normal container, but by using a belloped container, a non-deformable compaction can be obtained without any pretreatment of the hulls. Fully dense and mechanically strong blocks of Zircaloy can be fabricated by holding them at temperatures of around 1000 degrees C for three hours. It is also feasible to incorporate the other metallic parts of the fuel bundle, such as top and bottom tie plates and spacers, in the pressing. The HIP-densified hulls provide an effective means of self-containment of radioactive waste due to the excellent corrosion resistance of Zircaloy. A waste loading factor of close to 100% can be realized. Futher, a volume reduction factor of 7 and a surface reduction factor of aout 250 for a 1-ton canister can be achieved. Equilibrium calculations have shown that tritium present in the hulls can quantitatively be contained in the HIPed block. A study has been made of a possible process for industrilscale use. (Author)

Decontamination of fast reactor hulls and properties of immobilised waste forms

International Nuclear Information System (INIS)

Biddle, P.; Brown, P.E.; Rees, J.H.

1986-01-01

The studies described in this Report have been carried out on five batches of stainless steel hulls resulting from the reprocessing of fuel from the Prototype Fast Reactor at Dounreay. Direct immobilisation in cement and decontamination have been examined as possible routes for treating the hulls. A number of low temperature chemical techniques have been used to remove actinides and fission products from the hulls. The levels of α-activity could be reduced to less than 0.3 Ci/te of hulls. Thus decontamination might permit cheaper disposal than would be the case for undecontaminated hulls. 10mm sections of hulls have been immobilised in two cements in which either sand or blast furnace slag was used to extend the ordinary Portland cement. The level of Cs-137 leached from hulls immobilised in either of the cement compositions was about an order of magnitude lower than that leached from the bare hulls. For Sr-90, the BFS/OPC matrix gave a tenfold better retention than the sand/OPC. Ru-106 and Sb-125 were leached from the sand/OPC but not from the BFS/OPC samples. The preliminary studies suggested that cement was a satisfactory matrix for immobilising hulls and that the BFS/OPC was the better formulation. 30 refs, 26 tabs, 23 figs

Inflation perceptions and inflation expectation in South Africa: trends ...

African Journals Online (AJOL)

This paper reports the results of a multinomial analysis of inflation perceptions and inflation expectations in South Africa. Inflation perceptions surveys among South African individuals have been undertaken since 2006. The introduction of these surveys followed on domestic inflation expectation surveys conducted in 2000, ...

Iron-59 absorption from soy hulls: intrinsic vs extrinsic labeling

International Nuclear Information System (INIS)

Lykken, G.I.; Mahalko, J.R.; Nielsen, E.J.; Dintzis, F.R.

1986-01-01

As part of an evaluation of the validity of the extrinsic labeling technique for measuring iron absorption, absorption from soy hulls extrinsically labeled ( 59 Fe added to bread dough) was compared with that from soy hulls intrinsically labeled ( 59 Fe incorporated into the soy plant during growth). Century soybeans were grown in a greenhouse. After pods had formed and were filling, each plant was stem injected twice, at 3 day intervals, with 22 μCi 59 Fe as FeCl 2 in 25 μl of 0.5 M HCl solution. After the plants had senesced, the soybeans were harvested, dried, shelled and the hulls removed. Standard meals containing 3.5 mg Fe/meal and up to 0.06 μCi 59 Fe in a soy hull bun were fed on 2 consecutive days to free-living volunteers in a crossover design. Absorption of 59 Fe was greater from intrinsically labeled soy hulls than from extrinsically labeled soy hulls, 20 +/- 20% vs 15 +/- 11% (n=14, p > 0.05 by paired t-test). Apparent absorption ranged from 1.3% to 77% from intrinsically labeled soy hulls and .5% to 29% from extrinsically labeled soy hulls with the highest absorption occurring in persons with low serum ferritin (S.F. < 8 ng/ml). These findings provide additional evidence that the extrinsic labeling method is a valid measure of iron bioavailability to humans

Inflation,Inflation Variability, and Output Performance. Venezuela 1951-2002

OpenAIRE

Olivo, Victor

2014-01-01

This paper explores the relationship between the level of inflation, inflation variability, and output performance in the Venezuelan economy for the period 1951-2002. The paper examines the mechanism through which higher inflation translates into lower non-oil real GDP growth. We find empirical evidence that supports Friedman's (1977) contention that higher inflation produces more inflation volatility /uncertainty that leads to relative price variability that in turn, is harmful for the prope...

Injuries in Competitive Dragon Boating.

Science.gov (United States)

Mukherjee, Swarup; Leong, Hin Fong; Chen, Simin; Foo, Yong Xiang Wayne; Pek, Hong Kiat

2014-11-01

Dragon boating is a fast-growing team water sport and involves forceful repetitive motions that predispose athletes to overuse injuries. Despite the rising popularity of the sport, there is a lack of studies on injury epidemiology in dragon boating. To investigate the injury epidemiology in competitive dragon boating athletes. Descriptive epidemiological study. A total of 95 dragon boaters (49 males, 46 females) representing their respective universities took part in this study. Data were collected retrospectively using a reliable and valid self-report questionnaire. The study period was from August 2012 to July 2013. A total of 104 musculoskeletal injuries were reported (3.82 injuries/1000 athlete-exposures), 99% of which occurred during training. The most commonly injured regions were the lower back (22.1%), shoulder (21.1%), and wrist (17.3%). The majority of injuries were due to overuse (56.3%), and incomplete muscle-tendon strain was the most prevalent type of injury (50.5%). The time loss from injuries varied. In addition, a significant majority of the dragon boating athletes incurred nonmusculoskeletal injuries, with abrasions (90.5%), blisters (78.9%), and sunburns (72.6%) being the most common. Competitive dragon boating has a moderately high injury incidence, and there seems to be a direct relationship between exposure time and injury rate. A majority of the injuries are overuse in nature, and the body parts most actively involved in paddling movement are at higher risk of injuries. The high incidence of nonmusculoskeletal injuries in dragon boaters suggested that these injuries are likely outcomes of participation in the sport.

Inspecting the inside of underwater hull

Science.gov (United States)

Valkovic, Vladivoj; Sudac, Davorin

2009-05-01

In order to demonstrate the possibility of identifying the material within ship's underwater hull, sunken ships and other objects on the sea floor tests with the 14 MeV sealed tube neutron generator incorporated inside a small submarine submerged in the test basin filled with sea water have been performed. Results obtained for inspection of diesel fuel and explosive presence behind single and double hull constructions are presented.

Region-of-interest volumetric visual hull refinement

KAUST Repository

Knoblauch, Daniel

2010-01-01

This paper introduces a region-of-interest visual hull refinement technique, based on flexible voxel grids for volumetric visual hull reconstructions. Region-of-interest refinement is based on a multipass process, beginning with a focussed visual hull reconstruction, resulting in a first 3D approximation of the target, followed by a region-of-interest estimation, tasked with identifying features of interest, which in turn are used to locally refine the voxel grid and extract a higher-resolution surface representation for those regions. This approach is illustrated for the reconstruction of avatars for use in tele-immersion environments, where head and hand regions are of higher interest. To allow reproducability and direct comparison a publicly available data set for human visual hull reconstruction is used. This paper shows that region-of-interest reconstruction of the target is faster and visually comparable to higher resolution focused visual hull reconstructions. This approach reduces the amount of data generated through the reconstruction, allowing faster post processing, as rendering or networking of the surface voxels. Reconstruction speeds support smooth interactions between the avatar and the virtual environment, while the improved resolution of its facial region and hands creates a higher-degree of immersion and potentially impacts the perception of body language, facial expressions and eye-to-eye contact. Copyright © 2010 by the Association for Computing Machinery, Inc.

Use of Jatropha curcas hull biomass for bioactive compost production

Energy Technology Data Exchange (ETDEWEB)

Sharma, D.K. [Division of Environmental Sciences, Indian Agricultural Research Institute, New Delhi 110012 (India); Pandey, A.K.; Lata [Division of Microbiology, Indian Agricultural Research Institute, New Delhi 110012 (India)

2009-01-15

The paper deals with utilization of biomass of Jatropha hulls for production of bioactive compost. In the process of Jatropha oil extraction, a large amount of hull waste is generated. It has been found that the direct incorporation of hull into soil is considerably inefficient in providing value addition to soil due to its unfavorable physicochemical characteristics (high pH, EC and phenolic content). An alternative to this problem is the bioconversion of Jatropha hulls using effective lignocellulolytic fungal consortium, which can reduce the phytotoxicity of the degraded material. Inoculation with the fungal consortium resulted in better compost of jatropha hulls within 1 month, but it takes nearly 4 months for complete compost maturation as evident from the results of phytotoxicity test. Such compost can be applied to the acidic soil as a remedial organic manure to help maintaining sustainability of the agro-ecosystem. Likewise, high levels of cellulolytic enzymes observed during bioconversion indicate possible use of fungi for ethanol production from fermentation of hulls. (author)

Flavon inflation

Energy Technology Data Exchange (ETDEWEB)

Antusch, S. [Max-Planck-Institut fuer Physik (Werner-Heisenberg-Institut), Foehringer Ring 6, D-80805 Muenchen (Germany); King, S.F.; Malinsky, M. [School of Physics and Astronomy, University of Southampton, Southampton, SO17 1BJ (United Kingdom); Velasco-Sevilla, L. [ICTP, Strada Costiera 11, Trieste 34014 (Italy)], E-mail: lvelasco@ictp.it; Zavala, I. [CPT and IPPP, Durham University, South Road, DH1 3LE, Durham (United Kingdom)

2008-08-14

We propose an entirely new class of particle physics models of inflation based on the phase transition associated with the spontaneous breaking of family symmetry responsible for the generation of the effective quark and lepton Yukawa couplings. We show that the Higgs fields responsible for the breaking of family symmetry, called flavons, are natural candidates for the inflaton field in new inflation, or the waterfall fields in hybrid inflation. This opens up a rich vein of possibilities for inflation, all linked to the physics of flavour, with interesting cosmological and phenomenological implications. Out of these, we discuss two examples which realise flavon inflation: a model of new inflation based on the discrete non-Abelian family symmetry group A{sub 4} or {delta}{sub 27}, and a model of hybrid inflation embedded in an existing flavour model with a continuous SU(3) family symmetry. With the inflation scale and family symmetry breaking scale below the Grand Unification Theory (GUT) scale, these classes of models are free of the monopole (and similar) problems which are often associated with the GUT phase transition.

Flavon inflation

International Nuclear Information System (INIS)

Antusch, S.; King, S.F.; Malinsky, M.; Velasco-Sevilla, L.; Zavala, I.

2008-01-01

We propose an entirely new class of particle physics models of inflation based on the phase transition associated with the spontaneous breaking of family symmetry responsible for the generation of the effective quark and lepton Yukawa couplings. We show that the Higgs fields responsible for the breaking of family symmetry, called flavons, are natural candidates for the inflaton field in new inflation, or the waterfall fields in hybrid inflation. This opens up a rich vein of possibilities for inflation, all linked to the physics of flavour, with interesting cosmological and phenomenological implications. Out of these, we discuss two examples which realise flavon inflation: a model of new inflation based on the discrete non-Abelian family symmetry group A 4 or Δ 27 , and a model of hybrid inflation embedded in an existing flavour model with a continuous SU(3) family symmetry. With the inflation scale and family symmetry breaking scale below the Grand Unification Theory (GUT) scale, these classes of models are free of the monopole (and similar) problems which are often associated with the GUT phase transition

A Study on the Radioactivity Reduction Method for the Decladding Hull

International Nuclear Information System (INIS)

Kim, Jong Ho; Jung, In Ha; Park, Jang Jin; Shin, Jin Myeong; Lee, Ho Hee; Yang, Myung Seung

1994-01-01

The cladding materials remaining after reprocessing process of the nuclear fuel, generally called as hulls, are classified as a high-level radioactive waste. They are usually packaged in the container for disposal after being compacted, melted, or solidified into the matrix. The efforts to fabricated a better ingot for a more favorable disposal to the environment have failed due to the technical difficulties encountered in the chemical decontamination method. In the early 1990s, the accumulation of radio-chemical data on hulls and the advent of new technology such as a laser or plasma have made the pre-treatment of the hulls mere efficient. This paper summarizes the information regarding the radio-chemical analysis of the hull through a literature survey and determines the characteristics of the hull and depth profile of the radio-nuclides within the hull thickness. The feasibility study was carried out to evaluate the reduction of the radioactivity by peeling off the surface of the hull with the application of laser technology

Soft inflation

Science.gov (United States)

Berkin, Andrew L.; Maeda, Kei-Ichi; Yokoyama, Junichi

1990-01-01

The cosmology resulting from two coupled scalar fields was studied, one which is either a new inflation or chaotic type inflation, and the other which has an exponentially decaying potential. Such a potential may appear in the conformally transformed frame of generalized Einstein theories like the Jordan-Brans-Dicke theory. The constraints necessary for successful inflation are examined. Conventional GUT models such as SU(5) were found to be compatible with new inflation, while restrictions on the self-coupling constant are significantly loosened for chaotic inflation.

14 CFR 25.533 - Hull and main float bottom pressures.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float bottom pressures. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.533 Hull and main float bottom pressures. (a) General. The hull and main float structure, including frames and bulkheads...

46 CFR 91.40-1 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 91.40-1... VESSELS INSPECTION AND CERTIFICATION Drydocking § 91.40-1 Definitions relating to hull examinations. As...-hull fittings. (b) Internal structural examination means an examination of the vessel while afloat or...

46 CFR 71.50-25 - Alternative Hull Examination (AHE) procedure.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Alternative Hull Examination (AHE) procedure. 71.50-25... INSPECTION AND CERTIFICATION Drydocking § 71.50-25 Alternative Hull Examination (AHE) procedure. (a) To complete the underwater survey you must— (1) Perform a general examination of the underwater hull plating...

14 CFR 25.529 - Hull and main float landing conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float landing conditions. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.529 Hull and main.... (b) Unsymmetrical landing for hull and single float seaplanes. Unsymmetrical step, bow, and stern...

46 CFR 189.40-1 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 189.40-1... VESSELS INSPECTION AND CERTIFICATION Drydocking § 189.40-1 Definitions relating to hull examinations. As...-hull fittings. (b) Internal structural examination means an examination of the vessel while afloat or...

Generalized Higgs inflation

Energy Technology Data Exchange (ETDEWEB)

Kamada, Kohei [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Kobayashi, Tsutomu [Kyoto Univ. (Japan). Hakubi Center; Kyoto Univ. (Japan). Dept. of Physics; Takahashi, Tomo [Saga Univ. (Japan). Dept. of Physics; Yamaguchi, Masahide [Tokyo Institute of Technology (Japan). Dept. of Physics; Yokoyama, Jun' ichi [Tokyo Univ. (JP). Research Center for the Early Universe (RESCEU); Tokyo Univ., Chiba (JP). Inst. for the Physics and Mathematics of the Universe (IPMU)

2012-03-15

We study Higgs inflation in the context of generalized G-inflation, i.e., the most general single-field inflation model with second-order field equations. The four variants of Higgs inflation proposed so far in the literature can be accommodated at one time in our framework. We also propose yet another class of Higgs inflation, the running Einstein inflation model, that can naturally arise from the generalized G-inflation framework. As a result, five Higgs inflation models in all should be discussed on an equal footing. Concise formulas for primordial fluctuations in these generalized Higgs inflation models are provided, which will be helpful to determine which model is favored from the future experiments and observations such as the Large Hadron Collider and the Planck satellite.

21 CFR 1240.95 - Sanitation of water boats.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Sanitation of water boats. 1240.95 Section 1240.95... DISEASES Source and Use of Potable Water § 1240.95 Sanitation of water boats. No vessel engaged in interstate traffic shall obtain water for drinking and culinary purposes from any water boat unless the tanks...

Development on the automatic separator of separation of residual powders from SF hulls

International Nuclear Information System (INIS)

Jung, Jae Hoo; Kim, Young Hwang; Kim, Ki Ho; Park, Byung Buk; Lee, Hyo Jik; Kim, Sung Hyun; Park, Hee Sung; Lee, Jong Kwang; Kim, Ho Dong

2009-12-01

At the previous process of auto hull separator, vol-oxidizer convert UO 2 pellets to U 3 O 8 powder, and in the next step, hulls and powders is collected into each part of two vessels. In order to enhance the recover rate, fine powders on the surface of hulls should be removed from hulls. Auto hulls separator for fine powders is a device which can separate fine powders from hulls. In order to design and manufacture this device, we analyzed fine powders which are remained on the surface of hulls for separation properties, and selected separation and operation methods. Also, the main mechanism is devised by using the design considerations. These main mechanism consists of rotation drum, parts feeder, hull conveyer, powders separator, air shower, and vessels. Design considerations for auto hulls separator as follows ; capacity : 100 kg HM/batch, rod-cut length : 50 mm, recovery rate for fine powders : 95 % and operation condition : over 12 hrs/batch. We considered connection methods of the vessel and high vacuum module which can join with the outlet of auto hulls separator. Also, by using the above results, we have manufactured auto hulls separator for fine powders, and conducted blank tests for operation condition. Here, hulls of 50 mm length for test are used with 20 kg HM/batch. We have conducted separation tests of 2 batches to collect fine powders with hulls of 10 kg HM/batch. Our goal of recovery rate was 95%, but in the test result, the recovery rate of fine powders on the surface of hulls was over 96 %

14 CFR 23.529 - Hull and main float landing conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float landing conditions. 23... Water Loads § 23.529 Hull and main float landing conditions. (a) Symmetrical step, bow, and stern... directed perpendicularly to the keel line. (b) Unsymmetrical landing for hull and single float seaplanes...

33 CFR 181.27 - Information displayed near hull identification number.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Information displayed near hull... displayed near hull identification number. With the exception of the characters “US-”, which constitute the... the 12-character hull identification number (HIN), that information must be separated from the HIN by...

46 CFR 167.15-27 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 167.15-27... PUBLIC NAUTICAL SCHOOL SHIPS Inspections § 167.15-27 Definitions relating to hull examinations. As used... slipway for an examination of all accessible parts of the vessel's underwater body and all through-hull...

Feasibility of Using Rice Hulls as Bedding for Laboratory Mice.

Science.gov (United States)

Carbone, Elizabeth T; Kass, Philip H; Evans, Kristin D

2016-01-01

Factors that are considered when selecting laboratory mouse bedding include animal health and comfort, cost, effects on personnel, and bioactive properties. Corncob is economical and facilitates low intracage ammonia but has undesirable influences on some endocrine studies. Rice hulls are an economical material that has not been well characterized as a bedding substrate. In this pilot study, we compared various aspects of bedding performance of rice hulls and other materials. On a per-volume basis, rice hulls were less absorbent than was corncob bedding. Rice hulls had higher odds than did corncob or reclaimed wood pulp of having moisture present at the bedding surface. The results of the absorbency tests coupled with the results of preliminary monitoring of intracage ammonia raised concern about the ability of rice hulls to control ammonia levels sufficiently in cages with high occupancy. However, ammonia was negligible when cages contained 5 young adult female mice. The relative expression of 3 cytochrome p450 genes was compared among mice housed on rice hulls, corncob, reclaimed wood pulp, or pine shavings. The expression of Cyp1a2 was 1.7 times higher in the livers of mice housed on rice hulls than on pine shavings, but other differences were not statistically significant. This study provides information on the merits of rice hulls as laboratory mouse bedding. Their relatively poor moisture control is a major disadvantage that might preclude their widespread use.

46 CFR 78.50-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Hull markings. 78.50-5 Section 78.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings on Vessels § 78.50-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter. [CGD 72...

46 CFR 196.40-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 196.40-5 Section 196.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Markings on Vessels § 196.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter...

46 CFR 97.40-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 97.40-5 Section 97.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Markings on Vessels § 97.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this...

Inflation Forecast Contracts

OpenAIRE

Gersbach, Hans; Hahn, Volker

2012-01-01

We introduce a new type of incentive contract for central bankers: inflation forecast contracts, which make central bankers’ remunerations contingent on the precision of their inflation forecasts. We show that such contracts enable central bankers to influence inflation expectations more effectively, thus facilitating more successful stabilization of current inflation. Inflation forecast contracts improve the accuracy of inflation forecasts, but have adverse consequences for output. On balanc...

Diatom community structure on in-service cruise ship hulls.

Science.gov (United States)

Hunsucker, Kelli Zargiel; Koka, Abhishek; Lund, Geir; Swain, Geoffrey

2014-10-01

Diatoms are an important component of marine biofilms found on ship hulls. However, there are only a few published studies that describe the presence and abundance of diatoms on ships, and none that relate to modern ship hull coatings. This study investigated the diatom community structure on two in-service cruise ships with the same cruise cycles, one coated with an antifouling (AF) system (copper self-polishing copolymer) and the other coated with a silicone fouling-release (FR) system. Biofilm samples were collected during dry docking from representative areas of the ship and these provided information on the horizontal and vertical zonation of the hull, and intact and damaged coating and niche areas. Diatoms from the genera Achnanthes, Amphora and Navicula were the most common, regardless of horizontal ship zonation and coating type. Other genera were abundant, but their presence was more dependent on the ship zonation and coating type. Samples collected from damaged areas of the hull coating had a similar community composition to undamaged areas, but with higher diatom abundance. Diatom fouling on the niche areas differed from that of the surrounding ship hull and paralleled previous studies that investigated differences in diatom community structure on static and dynamically exposed coatings; niche areas were similar to static immersion and the hull to dynamic immersion. Additionally, diatom richness was greater on the ship with the FR coating, including the identification of several new genera to the biofouling literature, viz. Lampriscus and Thalassiophysa. These results are the first to describe diatom community composition on in-service ship hulls coated with a FR system. This class of coatings appears to have a larger diatom community compared to copper-based AF systems, with new diatom genera that have the ability to stick to ship hulls and withstand hydrodynamic forces, thus creating the potential for new problematic species in the biofilm.

36 CFR 3.2 - Do other boating laws and regulations apply to me when I operate my boat on park waters?

Science.gov (United States)

2010-07-01

... regulations apply to me when I operate my boat on park waters? 3.2 Section 3.2 Parks, Forests, and Public... boating laws and regulations apply to me when I operate my boat on park waters? (a) In addition to the.... NPS applies the adopted laws and regulations to vessels and their operation on all waters (navigable...

''Old'' locked inflation

International Nuclear Information System (INIS)

Liu, Yang; Piao, Yun-Song; Si, Zong-Guo

2009-01-01

In this paper, we revisit the idea of locked inflation, which does not require a potential satisfying the normal slow-roll condition, but suffers from the problems associated with ''saddle inflation''. We propose a scenario based on locked inflation, however, with an alternative evolution mechanism of the ''waterfall field'' φ. Instead of rolling down along the potential, the φ field will tunnel to end the inflation stage like in old inflation, by which the saddle inflation could be avoided. Further, we study a cascade of old locked inflation, which can be motivated by the string landscape. Our model is based on the consideration of making locked inflation feasible so as to give a working model without slow roll; It also can be seen as an effort to embed the old inflation in string landscape

Traditional boat-building and navigational techniques of southern Orissa

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.

of the region. No written records on ancient boatbuilding and navigational aids of the region are available for the reconstruction of the technique of boat-building. Boats of this area have been classified into two categories, namely planked and log boats...

78 FR 33856 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2013-06-05

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... public teleconference of the Sport Fishing and Boating Partnership Council (Council). DATES... announce that Sport Fishing and Boating Partnership Council will hold a teleconference. Background The...

Soybean hulls as an iron source for bread enrichment

International Nuclear Information System (INIS)

Johnson, C.D.; Berry, M.F.; Weaver, C.M.

1985-01-01

Soybean hulls, a concentrated source of iron, may have potential as a source of iron fortification in baked products. Retention of 59 Fe in rats from white bread containing intrinsically labeled soybean hulls did not differ significantly (p<0.05) from extrinsically labeled white bread fortified with bakery grade ferrous sulfate (70.4 and 63.1%, respectively). Physical and sensory evaluations of bread containing up to 5% soybean hulls did not differ from white bread in loaf volume, cross-sectional area, tenderness or overall acceptance. These results suggest that soybean hulls are a good source of available iron and may be added to bakery products without deleterious effects in baking performance and sensory acceptability

37 CFR 212.5 - Recordation of distinctive identification of vessel hull designer.

Science.gov (United States)

2010-07-01

... identification of vessel hull designer. 212.5 Section 212.5 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES PROTECTION OF VESSEL HULL DESIGNS § 212.5 Recordation of distinctive identification of vessel hull designer. (a) General. Any owner of a vessel hull may...

Properties of the histogram location approach and the extent and change of downward nominal wage rigidity in the EU

Directory of Open Access Journals (Sweden)

Andreas Behr

2006-06-01

Full Text Available The histogram location approach has been proposed by Kahn (1997 to estimate the fraction of wage cuts prevented by downward nominal wage rigidity. In this paper, we analyze the validity of the approach by means of a simulation study which yielded evidence of unbiasedness but also of potential underestimation of rigidity parameter uncertainty and therefore of potential anticonservative inference. We apply the histogram location approach to estimate the extent of downward nominal wage rigidity across the EU for 1995-2001. Our data base is the User Data Base (UDB of the European Community Household Panel (ECHP. The results show wide variation in the fraction of wage cuts prevented by nominal wage rigidity across the EU. The lowest rigidity parameters are found for the UK, Spain and Ireland, the largest for Portugal and Italy. Analyzing the change of rigidity between sub periods 1995-1997 and 1999-2001 even shows an widening of the differences in nominal wage rigidity. Due to the finding of large differences across the EU, the results imply that the costs of low inflation policies across the EU differ substantially.

14 CFR 23.531 - Hull and main float takeoff condition.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float takeoff condition. 23.531 Section 23.531 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Water Loads § 23.531 Hull and main float takeoff condition. For the wing and its attachment to the hull...

33 CFR 80.135 - Hull, MA to Race Point, MA.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Hull, MA to Race Point, MA. 80... INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Atlantic Coast § 80.135 Hull, MA to Race Point, MA. (a... the east coast of Massachusetts from the easternmost radio tower at Hull, charted in approximate...

14 CFR 25.527 - Hull and main float load factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float load factors. 25.527... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.527 Hull and main... 1=empirical hull station weighing factor, in accordance with figure 2 of appendix B. (7) r x=ratio...

14 CFR 25.531 - Hull and main float takeoff condition.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float takeoff condition. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.531 Hull and main float takeoff condition. For the wing and its attachment to the hull or main float— (a) The aerodynamic...

First-order inflation

International Nuclear Information System (INIS)

Kolb, E.W.

1991-01-01

In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been reviewed. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result if inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. (orig.)

Characterisation of the activities associated with fast reactor cladding hulls

International Nuclear Information System (INIS)

Biddle, P.; Rees, J.H.

1987-01-01

Four batches of hulls from the reprocessing of fuel from the Prototype Fast Reactor at Dounreay have been examined visually and photographically. The appearance of the hulls (shiny or black) depended on the original location in the fuel pin. The total fissile activities measured corresponded to less than 0.1% or the original fuel. The α-emitter, fission product and activation product activities have been determined from dissolution studies. Profile diagrams have been constructed for the distribution of the principal activities along lengths of seventeen hulls. The evidence obtained suggested that much of the activity on the hulls arose through deposition from the dissolver liquors. The deposits included insoluble particulate material which was thought to be responsible for the wide variations in activity across short lengths of some of the hulls. (orig.)

76 FR 1628 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2011-01-11

...] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior. ACTION... teleconference of the Sport Fishing and Boating Partnership Council (Council). DATE(S): We will hold the... sport fishing, boating, and conservation communities and is organized to enhance partnerships among...

Radio-controlled boat for measuring water velocities and bathymetry

Science.gov (United States)

Vidmar, Andrej; Bezak, Nejc; Sečnik, Matej

2016-04-01

Radio-controlled boat named "Hi3" was designed and developed in order to facilitate water velocity and bathymetry measurements. The boat is equipped with the SonTek RiverSurveyor M9 instrument that is designed for measuring open channel hydraulics (discharge and bathymetry). Usually channel cross sections measurements are performed either from a bridge or from a vessel. However, these approaches have some limitations such as performing bathymetry measurements close to the hydropower plant turbine or downstream from a hydropower plant gate where bathymetry changes are often the most extreme. Therefore, the radio-controlled boat was designed, built and tested in order overcome these limitations. The boat is made from a surf board and two additional small balance support floats. Additional floats are used to improve stability in fast flowing and turbulent parts of rivers. The boat is powered by two electric motors, steering is achieved with changing the power applied to left and right motor. Furthermore, remotely controlled boat "Hi3" can be powered in two ways, either by a gasoline electric generator or by lithium batteries. Lithium batteries are lighter, quieter, but they operation time is shorter compared to an electrical generator. With the radio-controlled boat "Hi3" we can perform measurements in potentially dangerous areas such as under the lock gates at hydroelectric power plant or near the turbine outflow. Until today, the boat "Hi3" has driven more than 200 km in lakes and rivers, performing various water speed and bathymetry measurements. Moreover, in future development the boat "Hi3" will be upgraded in order to be able to perform measurements automatically. The future plans are to develop and implement the autopilot. With this approach the user will define the route that has to be driven by the boat and the boat will drive the pre-defined route automatically. This will be possible because of the very accurate differential GPS from the Sontek River

Evaluation of Composite-Hull Ships Operating in Arctic Ice

Science.gov (United States)

2016-06-01

COMPOSITE- HULL SHIPS OPERATING IN ARCTIC ICE by Ryan M. Tran June 2016 Thesis Advisor: Young W. Kwon Co-Advisor: Jarema M. Didoszak THIS...Master’s thesis 4. TITLE AND SUBTITLE EVALUATION OF COMPOSITE- HULL SHIPS OPERATING IN ARCTIC ICE 5. FUNDING NUMBERS 6. AUTHOR Ryan M. Tran 7...melting ice caps. Extensive research is thus being conducted to determine the interaction between ice and steel- hulls in anticipation of opening sea

Hull loss accident model for narrow body commercial aircraft

Directory of Open Access Journals (Sweden)

Somchanok Tiabtiamrat

2010-10-01

Full Text Available Accidents with narrow body aircraft were statistically evaluated covering six families of commercial aircraft includingBoeing B737, Airbus A320, McDonnell Douglas MD80, Tupolev TU134/TU154 and Antonov AN124. A risk indicator for eachflight phase was developed based on motion characteristics, duration time, and the presence of adverse weather conditions.The estimated risk levels based on these risk indicators then developed from the risk indicator. Regression analysis indicatedvery good agreement between the estimated risk level and the accident ratio of hull loss cases per number of delivered aircraft.The effect of time on the hull loss accident ratio per delivered aircraft was assessed for B737, A320 and MD80. Equationsrepresenting the effect of time on hull loss accident ratio per delivered aircraft were proposed for B737, A320, and MD80,while average values of hull loss accident ratio per delivered aircraft were found for TU134, TU154, and AN 124. Accidentprobability equations were then developed for each family of aircraft that the probability of an aircraft in a hull loss accidentcould be estimated for any aircraft family, flight phase, presence of adverse weather factor, hour of day, day of week, monthof year, pilot age, and pilot flight hour experience. A simplified relationship between estimated hull loss accident probabilityand unsafe acts by human was proposed. Numerical investigation of the relationship between unsafe acts by human andfatality ratio suggested that the fatality ratio in hull loss accident was dominated primarily by the flight phase media.

First-order inflation

International Nuclear Information System (INIS)

Kolb, E.W.; Chicago Univ., IL

1990-09-01

In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result in inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. 58 refs., 3 figs

14 CFR 23.527 - Hull and main float load factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float load factors. 23.527... Water Loads § 23.527 Hull and main float load factors. (a) Water reaction load factors nw must be...=seaplane landing weight in pounds. (6) K1=empirical hull station weighing factor, in accordance with figure...

7 CFR 319.8-9 - Hull fiber and gin trash.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Hull fiber and gin trash. 319.8-9 Section 319.8-9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION... Importation and Entry of Cotton and Covers § 319.8-9 Hull fiber and gin trash. (a) Entry of hull fiber will be...

Recreational Boating Accidents and the Contribution of Boating Under the Influence

Data.gov (United States)

Department of Homeland Security — This report includes statistical information for the fifty states, five U.S. territories, and the District of Columbia on recreational boating accident data and the...

Safety Evaluation for Hull Waste Treatment Process in JNC

International Nuclear Information System (INIS)

Kojima, H.; Kurakata, K.

2002-01-01

Hull wastes and some scrapped equipment are typical radioactive wastes generated from reprocessing process in Tokai Reprocessing Plant (TRP). Because hulls are the wastes remained in the fuel shearing and dissolution, they contain high radioactivity. Japan Nuclear Cycle Development Institute (JNC) has started the project of Hull Waste Treatment Facility (HWTF) to treat these solid wastes using compaction and incineration methods since 1993. It is said that Zircaloy fines generated from compaction process might burn and explode intensely. Therefore explosive conditions of the fines generated in compaction process were measured. As these results, it was concluded that the fines generated from the compaction process were not hazardous material. This paper describes the outline of the treatment process of hulls and results of safety evaluation

77 FR 61626 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2012-10-10

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... meeting of the Sport Fishing and Boating Partnership Council (Council). A Federal advisory committee, the... Sport Fishing and Boating Partnership Council will hold a meeting. Background The Council was formed in...

76 FR 47606 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2011-08-05

...] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior. ACTION... Sport Fishing and Boating Partnership Council (Council). DATES: The meeting will be held on Wednesday... Advisory Committee Act, 5 U.S.C. App., we announce that the Sport Fishing and Boating Partnership Council...

Does boat traffic cause displacement of fish in estuaries?

Science.gov (United States)

Becker, Alistair; Whitfield, Alan K; Cowley, Paul D; Järnegren, Johanna; Næsje, Tor F

2013-10-15

Estuaries are increasingly under threat from a variety of human impacts. Recreational and commercial boat traffic in urban areas may represent a significant disturbance to fish populations and have particularly adverse effects in spatially restricted systems such as estuaries. We examined the effects of passing boats on the abundance of different sized fish within the main navigation channel of an estuary using high resolution sonar (DIDSON). Both the smallest (100-300 mm) and largest (>501 mm) size classes had no change in their abundance following the passage of boats. However, a decrease in abundance of mid-sized fish (301-500 mm) occurred following the passage of boats. This displacement may be attributed to a number of factors including noise, bubbles and the rapidly approaching object of the boat itself. In highly urbanised estuarine systems, regular displacement by boat traffic has the potential to have major negative population level effects on fish assemblages. Copyright © 2013 Elsevier Ltd. All rights reserved.

"We're All in the Same Boat": A Review of the Benefits of Dragon Boat Racing for Women Living with Breast Cancer.

Science.gov (United States)

Harris, Susan R

2012-01-01

This narrative review summarizes findings from quantitative and qualitative research literature that has been published over the past 15 years since an initial, community-based pilot study first challenged the long-held medical belief that vigorous, upper-body exercise would lead to lymphedema in women who were at risk due to treatments for breast cancer. Dragon boat racing originated in China more than 2000 years ago and has become a popular recreational and competitive support around the world. From the advent of the world's first breast cancer survivor dragon boat team, Abreast in a Boat launched in Vancouver, British Columbia, in 1996, there are now more than 140 breast cancer survivor dragon boat teams paddling and competing in 12 different countries. The wealth of quantitative and qualitative research that has ensued since that pilot study further supports the initial hypothesis that resistance exercise, for example, dragon boat paddling, is not only safe for women recovering from conventional breast cancer therapies but also shows that dragon boating has been embraced as a complementary exercise therapy by the cancer survivors participating in this magical sport.

78 FR 61866 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2013-10-04

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... meeting of the Sport Fishing and Boating Partnership Council (Council). A Federal advisory committee, the... Advisory Committee Act, 5 U.S.C. App., we announce that the Sport Fishing and Boating Partnership Council...

78 FR 23587 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2013-04-19

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... meeting of the Sport Fishing and Boating Partnership Council (Council). A Federal advisory committee, the... the Federal Advisory Committee Act, 5 U.S.C. App., we announce that the Sport Fishing and Boating...

46 CFR 176.630 - The Alternative Hull Examination (AHE) Program application.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false The Alternative Hull Examination (AHE) Program... PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.630 The Alternative Hull Examination (AHE) Program application. If your vessel meets the eligibility...

46 CFR 108.133 - Hull superstructure, structural bulkheads, decks, and deckhouses.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull superstructure, structural bulkheads, decks, and deckhouses. 108.133 Section 108.133 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A... Protection § 108.133 Hull superstructure, structural bulkheads, decks, and deckhouses. Each hull...

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

Macroeconomic variables and food price inflation, nonfood price inflation and overall inflation: A case of an emerging market

Directory of Open Access Journals (Sweden)

Raphael T Mpofu

2017-03-01

Full Text Available The paper analyses the association between certain macroeconomic variables and food price inflation, non-food price inflation and overall inflation in Zimbabwe, and also seeks to determine the level of association between these variables, given food security implications and overall well-being of its citizens. The study reveals that during the 2010 to 2016 period, Zimbabwe experienced stable food prices—annual food price inflation for food and non-alcoholic beverages averaged a relatively low growth rate of 0.12% monthly, while non-food inflation monthly growth rate was 0.09% and overall inflation growth rate was 0.11%. Although inflation from 2010 had been declining, of late, the increase in annual inflation has been underpinned by a rise in non-food inflation. Zimbabwe’s annual inflation remains lower than inflation rates in other countries in the region. Despite the increases lately in overall inflation, it remained below zero in January 2016, mostly driven by the depreciation of the South African rand and declining international oil prices. It should also be noted that domestic demand continued to decline in 2015, leading to the observed decline in both food and non-food prices. While food inflation has remained relatively low, it should be noted that non-food expenditures is significant component of the household budget and the rising prices result often lead to declining purchasing power and force households to make difficult choices in terms of their purchases. The findings of the study are food inflation has a low association with the independent variables under study; Zimbabwe broad money supply, rand-dollar exchange rates and the South Africa food inflation. There is, however, a very strong association between non-food inflation and these independent variables, as well as between overall inflation and the independent variables. Given the mostly rural population and the high level of unemployment in Zimbabwe, it can be surmised that

Technical Note: Does Core Inflation Help Forecast Total Inflation? Evidence from Colombia

OpenAIRE

John Thornton

1998-01-01

In Colombia core and total inflation are both (1) series, and core inflation is cointegrated with total inflation. Granger causality tests using error correction methodology indicate that divergence of total inflation from core inflation is quickly revers

Euro area Inflation as a Predictor of National Inflation Rates

OpenAIRE

Antonella Cavallo; Antonio Ribba

2013-01-01

The stability of inflation differentials is an important condition for the smooth working of a currency area, such as the European Economic and Monetary Union. In the presence of stability, changes in national inflation rates, while holding Euro-area inflation fixed contemporaneously, should be only transitory. If this is the case, the rate of inflation of the whole area can also be interpreted as a predictor, at least in the long run, of the different national inflation rates. However, in th...

46 CFR 91.15-1 - Standards in inspection of hulls, boilers, and machinery.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the..., respecting material and inspection of hulls, boilers, and machinery, and the certificate of classification...

46 CFR 189.15-1 - Standards in inspection of hulls, boilers, and machinery.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... inspection of hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels... chapter, respecting material and construction of hulls, boilers, and machinery, and certificate of...

Measurement of dose rate and estimation of beta activity in zircaloy hull drum

International Nuclear Information System (INIS)

Pandey, J.P.N.; Kumar, Pankaj; Shinde, A.M.; Purohit, R.G.; Sarkar, P.K.

2012-01-01

Fuel Reprocessing Plant is designed for the processing of spent fuel from reactor for the recovery of plutonium and uranium as PuO 2 and U 3 O 8 respectively. Zircaloy is used as cladding material of natural uranium fuel pins used in the reactors. In reprocessing plants chop and leach method is used to remove the zircaloy clad from the fuel matrix during Head End Treatment. Initially spent fuel bundles are chopped into pieces and collected in perforated baskets kept in dissolvers. All chopped pieces are dissolved in HNO 3 in the dissolvers followed by heating and boiling. Dissolved solutions are transferred to Filtrate Tank (FT) leaving behind un-dissolved zircoloy hull pieces in the dissolver baskets. Un-dissolved and almost dry hull pieces are transferred in hull drum from the dissolver baskets using the Hull Tilting Facility. Hull drums are made of stainless steel having 500 litre capacity and two third of its volume is filled with zircoloy pieces. Hull drums filled with hull pieces are loaded in Hull Removal Cask (HRC) and transported to SWMF (Solid Waste Management Facility) site for interim storage/disposal in tile holes. Hull pieces are high active solid wastes which contain significant amount of fission products. Radiation levels on hull drums are in the range of few hundreds of mGy/h which has high potential of external hazards if not handled properly. Therefore hull drums are handled remotely in specially designed lead shielded cask

Alternative Design of Boat Fenders

DEFF Research Database (Denmark)

Banke, Lars

1996-01-01

for the installation of the fender and perhaps for removing it if new oil-risers are to be initialled. The use of crane boats is expensive and weather-dependent.With these effect sin mind, a study of the energy absorption in the fender system, i.e. the fender itself and the frame, is needed for further development......On offshore platforms the purpose of fenders is to protect the oil-risers against minor accidental collisions with supply vessels. Normally, the fender is designed by use of thin-walled tubes. However, the tube itself is not capable of resisting the impact load of the boat. Therefore, alternative...... designs are searched for the fender.Today, an often used improvement of the fender is to fill it with grout or concrete. However, this improvement is not optimal since the fillings increase the weight of the fender beyond the crane capacity of the platform. Thus, crane boats are needed...

Design of boat powered photovoltaic systems

International Nuclear Information System (INIS)

Syafaruddin; Galla, D; Ajami, W.A.F.A.

2014-01-01

The solar energy has high potential applications in Indonesia since the country is located close to the equatorial region that makes the sun is almost bright along the day. In this paper, the boat power photovoltaic system is proposed. Such design may promote new innovations technically and economically in water transportation system since the country demography is almost 75% surrounded by water. The electricity energy is harvested from the sun through the PV panel then stored in the battery by solar charge control mechanism in order to rotate the prime mover of the boat by means the DC motor. The shaft of the DC motor is directly connected to the boat propeller and the speed motor is regulated by the pulse width modulation (PWM) technique generated from the AVR microcontroller ATmega16. The final design is obtained that for the boat with the total weight of 531.1758 kg, it may operate for 1.26 hours with the knot speed of 3.11 when 2 PV panels of 50 W, 2 DC motor of 0.3 kW and battery of 100 Ah capacity are used with the overall efficiency performance not less than 87.4%. (author)

Warm natural inflation

International Nuclear Information System (INIS)

Mishra, Hiranmaya; Mohanty, Subhendra; Nautiyal, Akhilesh

2013-01-01

In warm inflation models there is the requirement of generating large dissipative couplings of the inflation with radiation, while at the same Âătime, not de-stabilising the flatness of the inflation potential due to radiative corrections. One way to achieve this without fine tuning unrelated couplings is by supersymmetry. In this talk we will discuss warm inflation with Pseudo-Nambu-Goldstone Bosons (PNGB). In this case inflation and other light fields are PNGB. So, the radiative corrections to the potential are suppressed and the thermal Âăcorrections are small as long as the temperature is below the symmetry breaking scale. In such models it is possible to fulfill the contrary requirements of an inflation potential which is stable under radiative corrections and the generation of a large dissipative coupling of the inflation field with other light fields. This warm inflation model with PNGB gives the observed CMB-anisotropy amplitude and spectral index having the symmetry breaking scale at the GUT scale. (author)

Grounding-Induced Sectional Forces and Residual Strength of Grounded Ship Hulls

DEFF Research Database (Denmark)

Paik, Jeom Kee; Pedersen, Preben Terndrup

1996-01-01

The aim of the present study is to determine the sectional forces induced by ship grounding and also to assess the residual strength of groundedship hulls. An analytical approach is used to estimate the grounding-induced sectional forces of ships. The extent and location of structural damage due...... to grounding is defined based on the ABS Safe Hull guide. The residual strength of damaged hulls is calculated by using a simple analytical formula. The method is applied to residual strength assessment of a damaged double hull tanker of 38,400 dwt due to grounding....

Biofibres from biofuel industrial byproduct-Pongamia pinnata seed hull.

Science.gov (United States)

Manjula, Puttaswamy; Srinikethan, Govindan; Shetty, K Vidya

2017-01-01

Biodiesel production using Pongamia pinnata (P. pinnata) seeds results in large amount of unused seed hull. These seed hulls serve as a potential source for cellulose fibres which can be exploited as reinforcement in composites. These seed hulls were processed using chlorination and alkaline extraction process in order to isolate cellulose fibres. Scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR) analysis demonstrated the morphological changes in the fibre structure. Cellulose microfibres of diameter 6-8 µm, hydrodynamic diameter of 58.4 nm and length of 535 nm were isolated. Thermal stability was enhanced by 70 °C and crystallinity index (CI) by 19.8% ensuring isolation of crystalline cellulose fibres. The sequential chlorination and alkaline treatment stemmed to the isolation of cellulose fibres from P. pinnata seed hull. The isolated cellulose fibres possessed enhanced morphological, thermal, and crystalline properties in comparison with P. pinnata seed hull. These cellulose microfibres may potentially find application as biofillers in biodegradable composites by augmenting their properties.

Hull-Propeller Interaction and Its Effect on Propeller Cavitation

DEFF Research Database (Denmark)

Regener, Pelle Bo

In order to predict the required propulsion power for a ship reliably and accurately, it is not sufficient to only evaluate the resistance of the hull and the propeller performance in open water alone. Interaction effects between hull and propeller can even be a decisive factor in ship powering...... prediction and design optimization. The hull-propeller interaction coefficients of effective wake fraction, thrust deduction factor, and relative rotative efficiency are traditionally determined by model tests. Self-propulsion model tests consistently show an increase in effective wake fractions when using...... velocities. This offers an opportunity for additional insight into hull-propeller interaction and the propeller’s actual operating condition behind the ship, as the actual (effective) inflow is computed. Self-propulsion simulations at model and full scale were carried out for a bulk carrier, once...

46 CFR 45.135 - Hull openings at or below freeboard deck.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Hull openings at or below freeboard deck. 45.135 Section 45.135 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Conditions of Assignment § 45.135 Hull openings at or below freeboard deck. Closures for hull...

Dynamics of a Camphoric Acid boat at the air-water interface

OpenAIRE

Akella, V. S.; Singh, D. K.; Mandre, S.; Bandi, M. M.

2017-01-01

We report experiments on an agarose gel tablet loaded with camphoric acid (c-boat) set into self-motion by interfacial tension gradients at the air-water interface. We observe three distinct modes of c-boat motion: harmonic mode where the c-boat speed oscillates sinusoidally in time, a steady mode where the c-boat maintains constant speed, and a relaxation oscillation mode where the c-boat maintains near-zero speed between sudden jumps in speed and position at regular time intervals. Whereas ...

A demand-based management option to address boat congestion at ...

African Journals Online (AJOL)

2015-07-04

speed boating and jet skiing represent. 20%, 65%, 7.5% and 7.5%, respectively. This implies 4.6 angling boats, 48.75 leisure boats, 0.675 water skiers or speed boaters ..... Theory and Application to Travel Demand. MIT Press ...

Multiple inflation

International Nuclear Information System (INIS)

Murphy, P.J.

1987-01-01

The Theory of Inflation, namely, that at some point the entropy content of the universe was greatly increased, has much promise. It may solve the puzzles of homogeneity and the creation of structure. However, no particle physics model has yet been found that can successfully drive inflation. The difficulty in satisfying the constraint that the isotropy of the microwave background places on the effective potential of prospective models is immense. In this work we have codified the requirements of such models in a most general form. We have carefully calculated the amounts of inflation the various problems of the Standard Model need for their solution. We have derived a completely model independent upper bond on the inflationary Hubble parameter. We have developed a general notation with which to probe the possibilities of Multiple Inflation. We have shown that only in very unlikely circumstances will any evidence of an earlier inflation, survive the de Sitter period of its successor. In particular, it is demonstrated that it is most unlikely that two bouts of inflation will yield high amplitudes of density perturbations on small scales and low amplitudes on large. We conclude that, while multiple inflation will be of great theoretical interest, it is unlikely to have any observational impact

Preconditioning 2D Integer Data for Fast Convex Hull Computations.

Science.gov (United States)

Cadenas, José Oswaldo; Megson, Graham M; Luengo Hendriks, Cris L

2016-01-01

In order to accelerate computing the convex hull on a set of n points, a heuristic procedure is often applied to reduce the number of points to a set of s points, s ≤ n, which also contains the same hull. We present an algorithm to precondition 2D data with integer coordinates bounded by a box of size p × q before building a 2D convex hull, with three distinct advantages. First, we prove that under the condition min(p, q) ≤ n the algorithm executes in time within O(n); second, no explicit sorting of data is required; and third, the reduced set of s points forms a simple polygonal chain and thus can be directly pipelined into an O(n) time convex hull algorithm. This paper empirically evaluates and quantifies the speed up gained by preconditioning a set of points by a method based on the proposed algorithm before using common convex hull algorithms to build the final hull. A speedup factor of at least four is consistently found from experiments on various datasets when the condition min(p, q) ≤ n holds; the smaller the ratio min(p, q)/n is in the dataset, the greater the speedup factor achieved.

78 FR 53156 - Sport Fishing and Boating Partnership Council; Teleconference

Science.gov (United States)

2013-08-28

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council; Teleconference AGENCY: Fish and Wildlife... (Service), announce a public teleconference of the Sport Fishing and Boating Partnership Council (Council.... App., we announce that Sport Fishing and Boating Partnership Council will hold a teleconference...

Use of designated boat operators and designated drivers among college students.

Science.gov (United States)

Cheong, JeeWon; Hall, Nicole M; MacKinnon, David P

2006-07-01

Prior research has shown that designated drivers (DD) are widely used as a preventive measure for driving under the influence. Despite the prevalence of alcohol involvement in boating accidents, much less is known about the use of a designated boat operator (DBO). The current study investigated the prevalence of DBO use in recreational boating and compared the characteristics of DD users and DBO users. Several survey questionnaires were distributed to a group of undergraduate students at a large southwestern university for the purpose of investigating demographic characteristics, alcohol-use pattern, and other alcohol-related problem behaviors, such as driving and boating under the influence. Approximately 45% of the boaters reported they had drunk alcohol while boating, and approximately 70% had used a DBO in the most recent boating event. The DBO users were found to be similar to the DD users in terms of drinking pattern, age of drinking onset, and driving behaviors. High rates of alcohol use in recreational boating suggest the need for prevention strategies. Furthermore, future studies are needed to investigate the selection process of the DBOs and the differences between passengers and boat operators, which could shed light on strategies to prevent alcohol- involved boating injuries.

77 FR 33229 - Sport Fishing and Boating Partnership Council Charter

Science.gov (United States)

2012-06-05

... DEPARTMENT OF THE INTERIOR Office of the Secretary Sport Fishing and Boating Partnership Council... Secretary of the Interior has renewed the Sport Fishing and Boating Partnership Council (Council) charter... and support for the Sport Fish Restoration and Boating Trust Fund. d. Recommending policies or...

Business opportunities of new energy systems for boats; Veneiden uusien energiajearjestelmien liiketoimintamahdollisuudet

Energy Technology Data Exchange (ETDEWEB)

Koskinen, O.; Hyyppae, P.; Enkvist, D.

2010-07-01

During the last years the principal theme for many international boat events has been new energy solutions and Green Boating. Within this topic there are several open questions, like how rapidly will the industry follow the trend of the car industry towards electrical and hybrid engine solutions. One of the key questions in the boat branch is how customers will embrace these new energy solutions and how strong the demand will be. This project, mainly financed by Tekes, has as an objective to study what business opportunities these new energy solutions can offer to boat manufactures and to other actors within the business. The research began on Helsinki Boatshow 2010 where 135 visitors answered the survey. After this 18 boat industry actors in Ostrobothnia region were interviewed about how they see the possibilities of new energy systems. Both boaters and boat industry considered that green values will boost the sales, albeit there were some surprising differences e.g. between age groups of consumers (the biggest gap between group under 30 years and the age group 30-45 years). The overall results of this study claim that Finnish boat industry is quite customer oriented and there was no big difference between the boat owners' thoughts and the thinking of boat branch representatives. Instead there was a clear difference between tho motor and sail boat sectors according to both boaters and companies within boat field. Sail boat owners and sail boat manufactures had a clearly more positive attitude toward propulsion by electricity and hybrid engines or the usage of solar panels than the motor boat owners or manufacturer had. Finnish boat owners consider that electrical engines suit well in small boats (under 4 meters), but this is offering very limited new business opportunities because it is hard to compete with the existing Asian manufacturing and the supply chain of these products is in Finland already comprehensive. According to this research Finnish boat

As the climatic disasters came. Hydrogen world view contra inflation of hypotheses; Als die Klimakatastrophen kamen. Wasserstoff-Weltbild kontra Hypothesen-Inflation

Energy Technology Data Exchange (ETDEWEB)

Gottfried, Rudolf J.

2009-07-01

The author of the contribution under consideration addresses to all persons which are interested scientifically and also are ready for leaving the well-trodden paths of conventional conceptions occasionally if it is shown that the paths mislead when continuing. In particular, here it is a matter of the controversy of the hydrogen conception of the world against hypothesis inflation. This book does not set up new hypotheses which are arranged in the numerously existing hypotheses according to the picture of the world. It is time to deliver the secured facts from the crusts of rigid hypotheses in order to look for new realizations without prejudices and in order to arrange the hypotheses meaningfully.

DECONTAMINATION OF ZIRCALOY SPENT FUEL CLADDING HULLS

International Nuclear Information System (INIS)

Rudisill, T; John Mickalonis, J

2006-01-01

The reprocessing of commercial spent nuclear fuel (SNF) generates a Zircaloy cladding hull waste which requires disposal as a high level waste in the geologic repository. The hulls are primarily contaminated with fission products and actinides from the fuel. During fuel irradiation, these contaminants are deposited in a thin layer of zirconium oxide (ZrO 2 ) which forms on the cladding surface at the elevated temperatures present in a nuclear reactor. Therefore, if the hulls are treated to remove the ZrO 2 layer, a majority of the contamination will be removed and the hulls could potentially meet acceptance criteria for disposal as a low level waste (LLW). Discard of the hulls as a LLW would result in significant savings due to the high costs associated with geologic disposal. To assess the feasibility of decontaminating spent fuel cladding hulls, two treatment processes developed for dissolving fuels containing zirconium (Zr) metal or alloys were evaluated. Small-scale dissolution experiments were performed using the ZIRFLEX process which employs a boiling ammonium fluoride (NH 4 F)/ammonium nitrate (NH 4 NO 3 ) solution to dissolve Zr or Zircaloy cladding and a hydrofluoric acid (HF) process developed for complete dissolution of Zr-containing fuels. The feasibility experiments were performed using Zircaloy-4 metal coupons which were electrochemically oxidized to produce a thin ZrO 2 layer on the surface. Once the oxide layer was in place, the ease of removing the layer using methods based on the two processes was evaluated. The ZIRFLEX and HF dissolution processes were both successful in removing a 0.2 mm (thick) oxide layer from Zircaloy-4 coupons. Although the ZIRFLEX process was effective in removing the oxide layer, two potential shortcomings were identified. The formation of ammonium hexafluorozirconate ((NH 4 ) 2 ZrF 6 ) on the metal surface prior to dissolution in the bulk solution could hinder the decontamination process by obstructing the removal of

An integrated pusher-guide-boat for ship nuclear propulsion

International Nuclear Information System (INIS)

Baujat, Jacques.

1974-01-01

The pusher guide-boat is characterized in that it comprises a streamlined enclosure with a front surface and an upper surface, containing a nuclear-power generating plant and means for converting the thus-generated power into mechanical energy used for actuating the pusher-boat propelling parts situated rearwardly, and in that the streamlined enclosure comprises, on its front surface and on at least a portion of its upper surface, areas for the contact thereof with respective portions of the vessel driven by said pusher-boat and means for fastening the latter to the vessel, said pusher-boat being also provided with water-ballasts [fr

Non-destructive assay of leached hulls in a nuclear fuel reprocessing plant

International Nuclear Information System (INIS)

Hofstetter, K.J.; Henderson, B.C.; Gray, J.H.; Huff, G.A.

1978-01-01

The hull monitor at the Barnwell Nuclear Fuels Plant (BNFP) will be a remotely controlled, fully automated system designed to quantitatively assay leached hulls for undissolved U and Pu. The hull monitor will assay the hulls from one metric ton of fuel per dissolver basket with the design goal of detecting 0.1% undissolved fuel and yet remain within the framework of the BNFP materials flow of five hull baskets per day. The non-destructive assay will be accomplished using a computer-based gamma-ray pulse height analysis system employing a 5 x 5 inch NaI(Tl) scintillation detector. The intense radiations from the fission product isotopes and the activation product isotopes produced in the reactor prevent direct assay of the undissolved fuel left in the hulls. The measurement will be made indirectly by demonstrating a correlation between the amount of 144 Ce undissolved and the remaining U. The isotope 144 Ce is a direct fission product with high cumulative yield. The daughter isotope 144 Pr has a gamma ray at 2.18 MeV well above other predominant radiations in the spectrum from the major interferences 60 Co, 58 Co, 95 Zr( 95 Nb), 137 Cs and 106 Ru( 106 Rh). Segmented scanning operation of the hull monitor is accomplished by rotation and vertical transversal of the hulls container past the detector station. Proper collimation and absorbers are required to maximize the 144 Ce( 144 Pr) to background ratio. A basket indexer is provided which monitors the scanning rate and ensures repositioning. The leached hull monitor system will be interfaced to a computer-based multichannel analyzer for ease of operation and data handling. A calibration basket has been fabricated to accomodate radioactive sources and inactive Zircaloy hulls

Automated Visual Inspection of Ship Hull Surfaces Using the Wavelet Transform

Directory of Open Access Journals (Sweden)

Carlos Fernández-Isla

2013-01-01

Full Text Available A new online visual inspection technique is proposed, based on a wavelet reconstruction scheme over images obtained from the hull. This type of visual inspection to detect defects in hull surfaces is commonly carried out at shipyards by human inspectors before the hull repair task starts. We propose the use of Shannon entropy for automatic selection of the band for image reconstruction which provides a low decomposition level, thus avoiding excessive degradation of the image, allowing more precise defect segmentation. The proposed method here is capable of on-line assisting to a robotic system to perform grit blasting operations over damage areas of ship hulls. This solution allows a reliable and cost-effective operation for hull grit spot blasting. A prototype of the automated blasting system has been developed and tested in the Spanish NAVANTIA shipyards.

CFD investigation of pentamaran ship model with chine hull form on the resistance characteristics

Science.gov (United States)

Yanuar; Sulistyawati, W.

2018-03-01

This paper presents an investigation of pentamaran hull form with chine hull form to the effects of outriggers position, asymmetry, and deadrise angles on the resistance characteristics. The investigation to the resistance characteristics by modelling pentamaran hull form using chine with symmetrical main hull and asymmetric outboard on the variation deadrise angles: 25°, 30°, 35° and Froude number 0,1 to 0,7. On calm water resistance characteristics of six pentamaran models with chine-hull form examined by variation of deadrise angles by using CFD. Comparation with Wigley hull form, the maximum resistance drag reduction of the chine hull form was reduced by 15.81% on deadrise 25°, 13.8% on deadrise 30°, and 20.38% on deadrise 35°. While the smallest value of total resistance coefficient was generated from chine 35° at R/L:1/14 and R/L:1/7. Optimum hull form for minimum resistance has been obtained, so it is interesting to continue with angle of entrance and stem angle of hull for further research.

Antioxidant constituents of almond [Prunus dulcis (Mill.) D.A. Webb] hulls.

Science.gov (United States)

Takeoka, Gary R; Dao, Lan T

2003-01-15

Almond hulls (Nonpareil variety) were extracted with methanol and analyzed by reversed phase HPLC with diode array detection. The extract contained 5-O-caffeoylquinic acid (chlorogenic acid), 4-O-caffeoylquinic acid (cryptochlorogenic acid), and 3-O-caffeoylquinic acid (neochlorogenic acid) in the ratio 79.5:14.8:5.7. The chlorogenic acid concentration of almond hulls was 42.52 +/- 4.50 mg/100 g of fresh weight (n = 4; moisture content = 11.39%). Extracts were tested for their ability to inhibit the oxidation of methyl linoleate at 40 degrees C. At an equivalent concentration (10 microg/1 g of methyl linoleate) almond hull extracts had higher antioxidant activity than alpha-tocopherol. At higher concentrations (50 microg/1 g of methyl linoleate) almond hull extracts showed increased antioxidant activity that was similar to chlorogenic acid and morin [2-(2,4-dihydroxyphenyl)-3,5,7-trihydroxy-4H-1-benzopyran-4-one] standards (at the same concentrations). These data indicate that almond hulls are a potential source of these dietary antioxidants. The sterols (3beta,22E)-stigmasta-5,22-dien-3-ol (stigmasterol) and (3beta)-stigmast-5-en-3-ol (beta-sitosterol) (18.9 mg and 16.0 mg/100 g of almond hull, respectively) were identified by GC-MS of the silylated almond hull extract.

Topology Model of the Flow around a Submarine Hull Form

Science.gov (United States)

2015-12-01

UNCLASSIFIED Topology Model of the Flow around a Submarine Hull Form S.-K. Lee Maritime Division Defence Science and Technology Group DST-Group–TR...3177 ABSTRACT A topology model constructed from surface-streamer visualisation describes the flow around a generic conventional submarine hull form at...pure yaw angles of 0 ◦, 10 ◦ and 18 ◦. The model is used to develop equations for sway-force and yaw-moment coefficients which relate to the hull - form

Refined universal laws for hull volumes and perimeters in large planar maps

International Nuclear Information System (INIS)

Guitter, Emmanuel

2017-01-01

We consider ensembles of planar maps with two marked vertices at distance k from each other, and look at the closed line separating these vertices and lying at distance d from the first one ( d   <   k ). This line divides the map into two components, the hull at distance d which corresponds to the part of the map lying on the same side as the first vertex and its complementary. The number of faces within the hull is called the hull volume, and the length of the separating line the hull perimeter. We study the statistics of the hull volume and perimeter for arbitrary d and k in the limit of infinitely large planar quadrangulations, triangulations and Eulerian triangulations. We consider more precisely situations where both d and k become large with the ratio d / k remaining finite. For infinitely large maps, two regimes may be encountered: either the hull has a finite volume and its complementary is infinitely large, or the hull itself has an infinite volume and its complementary is of finite size. We compute the probability for the map to be in either regime as a function of d / k as well as a number of universal statistical laws for the hull perimeter and volume when maps are conditioned to be in one regime or the other. (paper)

76 FR 7757 - Hull Identification Numbers for Recreational Vessels

Science.gov (United States)

2011-02-11

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2007-29236] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Follow-up to request for... expanded hull identification number (HIN). The Coast Guard's decision-making process included consideration...

Management of waste cladding hulls. Part II. An assessment of zirconium pyrophoricity and recommendations for handling waste hulls

International Nuclear Information System (INIS)

Kullen, B.J.; Levitz, N.M.; Steindler, M.J.

1977-11-01

This report reviews experience and research related to the pyrophoricity of zirconium and zirconium alloys. The results of recent investigations of the behavior of Zircaloy and some observations of industrial handling and treatment of Zircaloy tubing and scrap are also discussed. A model for the management of waste Zircaloy cladding hulls from light water reactor fuel reprocessing is offered, based on an evaluation of the reviewed information. It is concluded that waste Zircaloy cladding hulls do not constitute a pyrophoric hazard if, following the model flow sheet, finely divided metal is oxidized during the management procedure. Steps alternative to the model are described which yield zirconium in deactivated form and also accomplish varying degrees of transuranic decontamination. Information collected into appendixes is (1) a collation of zirconium pyrophoricity data from the literature, (2) calculated radioactivity contents in Zircaloy cladding hulls from spent LWR fuels, and (3) results of a laboratory study on volatilization of zirconium from Zircaloy using HCl or Cl 2

Remote inflation as hybrid-like sneutrino/MSSM inflation

International Nuclear Information System (INIS)

Matsuda, Tomohiro

2009-01-01

A new scenario of hybrid-like inflation is considered for sneutrino and MSSM fields. Contrary to the usual hybrid inflation model, the direct coupling between a trigger field and the sneutrino/MSSM inflaton field is not necessary for the scenario. The dissipation and the radiation from the sneutrino/MSSM inflaton can be written explicitly by using the Yukawa couplings. Remote inflation does not require the shift symmetry or cancellation in solving the η problem.

Dynamics of a camphoric acid boat at the air-water interface

Science.gov (United States)

Akella, V. S.; Singh, Dhiraj K.; Mandre, Shreyas; Bandi, M. M.

2018-05-01

We report experiments on an agarose gel tablet loaded with camphoric acid (c-boat) spontaneously set into motion by surface tension gradients on the water surface. We observe three distinct modes of c-boat motion: harmonic mode where the c-boat speed oscillates sinusoidally in time, a steady mode where the c-boat maintains constant speed, and an intermittent mode where the c-boat maintains near-zero speed between sudden jumps in speed. Whereas all three modes have been separately reported before in different systems, controlled release of Camphoric Acid (CA) from the agarose gel matrix allowed the observation of all the three modes in the same system. These three modes are a result of a competition between the driving (surface tension gradients) and drag forces acting on the c-boat. Moreover we suggest that there exist two time scales corresponding to spreading of CA and boat motion and the mismatch of these two time scales give rise to the three modes in boat motion. We reproduced all the modes of motion by varying the air-water interfacial tension using Sodium Dodecyl Sulfate (SDS).

Pseudosmooth tribrid inflation

International Nuclear Information System (INIS)

Antusch, Stefan; Nolde, David; Rehman, Mansoor Ur

2012-01-01

We explore a new class of supersymmetric models of inflation where the inflaton is realised as a combination of a Higgs field and (gauge non-singlet) matter fields, using a ''tribrid'' structure of the superpotential. Inflation is associated with a phase transition around GUT scale energies. The inflationary trajectory already preselects the later vacuum after inflation, which has the advantage of automatically avoiding the production of dangerous topological defects at the end of inflation. While at first sight the models look similar to smooth inflation, they feature a waterfall and are therefore only pseudosmooth. The new class of models offers novel possibilities for realising inflation in close contact with particle physics, for instance with supersymmetric GUTs or with supersymmetric flavour models based on family symmetries

Pseudosmooth tribrid inflation

Science.gov (United States)

Antusch, Stefan; Nolde, David; Rehman, Mansoor Ur

2012-08-01

We explore a new class of supersymmetric models of inflation where the inflaton is realised as a combination of a Higgs field and (gauge non-singlet) matter fields, using a ``tribrid'' structure of the superpotential. Inflation is associated with a phase transition around GUT scale energies. The inflationary trajectory already preselects the later vacuum after inflation, which has the advantage of automatically avoiding the production of dangerous topological defects at the end of inflation. While at first sight the models look similar to smooth inflation, they feature a waterfall and are therefore only pseudosmooth. The new class of models offers novel possibilities for realising inflation in close contact with particle physics, for instance with supersymmetric GUTs or with supersymmetric flavour models based on family symmetries.

The behavioural response of Australian fur seals to motor boat noise.

Directory of Open Access Journals (Sweden)

Joy S Tripovich

Full Text Available Australian fur seals breed on thirteen islands located in the Bass Strait, Australia. Land access to these islands is restricted, minimising human presence but boat access is still permissible with limitations on approach distances. Thirty-two controlled noise exposure experiments were conducted on breeding Australian fur seals to determine their behavioural response to controlled in-air motor boat noise on Kanowna Island (39°10'S, 146°18'E. Our results show there were significant differences in the seals' behaviour at low (64-70 dB versus high (75-85 dB sound levels, with seals orientating themselves towards or physically moving away from the louder boat noise at three different sound levels. Furthermore, seals responded more aggressively with one another and were more alert when they heard louder boat noise. Australian fur seals demonstrated plasticity in their vocal responses to boat noise with calls being significantly different between the various sound intensities and barks tending to get faster as the boat noise got louder. These results suggest that Australian fur seals on Kanowna Island show behavioural disturbance to high level boat noise. Consequently, it is recommended that an appropriate level of received boat sound emissions at breeding fur seal colonies be below 74 dB and that these findings be taken into account when evaluating appropriate approach distances and speed limits for boats.

Inflation Protected Investment Strategies

Directory of Open Access Journals (Sweden)

Mirco Mahlstedt

2016-03-01

Full Text Available In this paper, a dynamic inflation-protected investment strategy is presented, which is based on traditional asset classes and Markov-switching models. Different stock market, as well as inflation regimes are identified, and within those regimes, the inflation hedging potential of stocks, bonds, real estate, commodities and gold are investigated. Within each regime, we determine optimal investment portfolios driven by the investment idea of protection from losses due to changing inflation if inflation is rising or high, but decoupling the performance from inflation if inflation is low. The results clearly indicate that these asset classes behave differently in different stock market and inflation regimes. Whereas in the long-run, we agree with the general opinion in the literature that stocks and bonds are a suitable hedge against inflation, we observe for short time horizons that the hedging potential of each asset class, especially of real estate and commodities, depend strongly on the state of the current market environment. Thus, our approach provides a possible explanation for different statements in the literature regarding the inflation hedging properties of these asset classes. A dynamic inflation-protected investment strategy is developed, which combines inflation protection and upside potential. This strategy outperforms standard buy-and-hold strategies, as well as the well-known 1 N -portfolio.

Construct-a-Boat. Science by Design Series.

Science.gov (United States)

Baroway, William

This book is one of four books in the Science-by-Design Series created by TERC and funded by the National Science Foundation (NSF). It challenges high school students to investigate the physics of boat performance and work with systems and modeling. Through research, design, testing, and evaluation of a model boat, students experience the…

Grene and Hull on types and typological thinking in biology.

Science.gov (United States)

Honenberger, Phillip

2015-04-01

Marjorie Grene (1910-2009) and David Hull (1935-2010) were among the most influential voices in late twentieth-century philosophy of biology. But, as Grene and Hull pointed out in published discussions of one another's work over the course of nearly forty years, they disagreed strongly on fundamental issues. Among these contested issues is the role of what is sometimes called "typology" and "typological thinking" in biology. In regard to taxonomy and the species problem, Hull joined Ernst Mayr's construal of typological thinking as a backward relic of pre-Darwinian science that should be overcome. Grene, however, treated the suspicion of typological thinking that characterized Hull's views, as well as those of other architects of the New Evolutionary Synthesis, as itself suspicious and even unsustainable. In this paper I review three debates between Grene and Hull bearing on the question of the validity of so-called typological thinking in biology: (1) a debate about the dispensability of concepts of "type" within evolutionary theory, paleontology, and taxonomy; (2) a debate about whether species can be adequately understood as individuals, and thereby independently of those forms of thinking Hull and Mayr had construed as "typological"; and (3) a debate about the prospects of a biologically informed theory of human nature. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sintering boat transport system for the SAF line

International Nuclear Information System (INIS)

Egli, W.; Bogart, R.L.

1983-10-01

The Secure Automated Fabrication (SAF) line will be a remotely operated process for the manufacture of breeder reactor fuel pins. The sintering boat transport system will service the pellet operations. Since the Boat Transport System will be the major link between several subsystem operations, reliability and ease of maintenance are prime requirements for the design. A prototypic version of the Boat Transport System was designed, built and tested to verify the operability of the selected approach. Extensive testing provided valuable input to the final design and substantiated the soundness of the concept

Recreational Boating Statistics 2012

Data.gov (United States)

Department of Homeland Security — Every year, the USCG compiles statistics on reported recreational boating accidents. These statistics are derived from accident reports that are filed by the owners...

Recreational Boating Statistics 2013

Data.gov (United States)

Department of Homeland Security — Every year, the USCG compiles statistics on reported recreational boating accidents. These statistics are derived from accident reports that are filed by the owners...

Recreational Boating Statistics 2011

Data.gov (United States)

Department of Homeland Security — Every year, the USCG compiles statistics on reported recreational boating accidents. These statistics are derived from accident reports that are filed by the owners...

46 CFR 174.225 - Hull penetrations and shell connections.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull penetrations and shell connections. 174.225 Section 174.225 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY... § 174.225 Hull penetrations and shell connections. Each overboard discharge and shell connection except...

75 FR 13294 - National Boating Safety Advisory Council

Science.gov (United States)

2010-03-19

... the strategic planning process and any new issues or factors that could impact, or contribute to, the...) Recreational Boating Safety Strategic Planning Subcommittee meeting. Saturday, April 17, 2010: (12) Recreational Boating Safety Strategic Planning Subcommittee meeting (Cont.). (13) Prevention through People...

46 CFR 71.50-19 - The Alternative Hull Examination (AHE) Program application.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false The Alternative Hull Examination (AHE) Program...) PASSENGER VESSELS INSPECTION AND CERTIFICATION Drydocking § 71.50-19 The Alternative Hull Examination (AHE... apply to the AHE Program. You must submit an application at least 90 days before the requested hull...

77 FR 29251 - Safety Zone; Carnival Fireworks Display, Nantasket Beach, Hull, MA

Science.gov (United States)

2012-05-17

...-AA00 Safety Zone; Carnival Fireworks Display, Nantasket Beach, Hull, MA AGENCY: Coast Guard, DHS... zone on the navigable waters off of Nantasket Beach in the vicinity of Hull, MA for a Carnival... spectators and vessels from the hazards associated with fireworks displays. Discussion of Proposed Rule Hull...

Pseudosmooth tribrid inflation

Energy Technology Data Exchange (ETDEWEB)

Antusch, Stefan; Nolde, David; Rehman, Mansoor Ur, E-mail: stefan.antusch@unibas.ch, E-mail: david.nolde@unibas.ch, E-mail: mansoor-ur.rehman@unibas.ch [Department of Physics, University of Basel, Klingelbergstr. 82, CH-4056 Basel (Switzerland)

2012-08-01

We explore a new class of supersymmetric models of inflation where the inflaton is realised as a combination of a Higgs field and (gauge non-singlet) matter fields, using a ''tribrid'' structure of the superpotential. Inflation is associated with a phase transition around GUT scale energies. The inflationary trajectory already preselects the later vacuum after inflation, which has the advantage of automatically avoiding the production of dangerous topological defects at the end of inflation. While at first sight the models look similar to smooth inflation, they feature a waterfall and are therefore only pseudosmooth. The new class of models offers novel possibilities for realising inflation in close contact with particle physics, for instance with supersymmetric GUTs or with supersymmetric flavour models based on family symmetries.

Is Inflation in India an Attractor of Inflation in Nepal?

OpenAIRE

Edimon Ginting

2007-01-01

The paper attempts to answer some important questions around the inflationary process in Nepal, particularly the transmission of inflation from India. Because the Nepali currency is pegged to the Indian rupee and the two countries share an open border, price developments in Nepal would be expected to mirror to those in India. The results show that inflation in India and inflation in Nepal tend to converge in the long run. Our estimates indicate that the passthrough of inflation from India to ...

46 CFR 45.143 - Hull openings above freeboard deck.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Hull openings above freeboard deck. 45.143 Section 45.143 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Conditions of Assignment § 45.143 Hull openings above freeboard deck. Closures for openings above...

Effect of boat noise and angling on lake fish behaviour

DEFF Research Database (Denmark)

Jacobsen, Lene; Baktoft, Henrik; Jepsen, Niels

2014-01-01

or (2) boating in short intervals combined with angling with artificial lures between engine runs. The response of the fish species was evaluated by high-resolution tracking using an automatic acoustic telemetry system and transmitters with sub-minute burst rates. Rutilus rutilus swimming speed......The effects of disturbances from recreational activities on the swimming speed and habitat use of roach Rutilus rutilus, perch Perca fluviatilis and pike Esox lucius were explored. Disturbances were applied for 4h as (1) boating in short intervals with a small outboard internal combustion engine...... the two types of disturbances (boating with and without angling), indicating that boating was the primary source of disturbance. This study highlights species-specific responses to recreational boating and may have implications for management of human recreational activities in lakes...

46 CFR 111.95-7 - Wiring of boat winch components.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Wiring of boat winch components. 111.95-7 Section 111.95... SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Boat Winches § 111.95-7 Wiring of boat winch... electric installation from all sources of potential. The switch must be in series with and on the supply...

Fluxbrane Inflation

CERN Document Server

Hebecker, Arthur; Lust, Dieter; Steinfurt, Stephan; Weigand, Timo

2012-01-01

As a first step towards inflation in genuinely F-theoretic setups, we propose a scenario where the inflaton is the relative position of two 7-branes on holomorphic 4-cycles. Non-supersymmetric gauge flux induces an attractive inter-brane potential. The latter is sufficiently flat in the supergravity regime of large volume moduli. Thus, in contrast to brane-antibrane inflation, fluxbrane inflation does not require warping. We calculate the inflaton potential both in the supergravity approximation and via an open-string one-loop computation on toroidal backgrounds. This leads us to propose a generalisation to genuine Calabi-Yau manifolds. We also comment on competing F-term effects. The end of inflation is marked by the condensation of tachyonic recombination fields between the 7-branes, triggering the formation of a bound state described as a stable extension along the 7-brane divisor. Hence our model fits in the framework of hybrid D-term inflation. We work out the main phenomenological properties of our D-te...

Free-surface flow around an appended hull

International Nuclear Information System (INIS)

Lungu, A; Pacuraru, F

2010-01-01

The prediction of the total drag experienced by an advancing ship is a complicated problem which requires a thorough understanding of the hydrodynamic forces acting on the hull, the physical processes from which these forces arise as well as their mutual interaction. A general numerical method to predict the hydrodynamic performance of a twin-propeller combatant ship is presented in the paper, which describes the solution of a RANS solver coupled with a body force method as an attempt in investigating the flow features around the ship hull equipped with rotating propellers and rudders. A special focus is made on the propeller non-symmetrical inflow field, aimed at obtaining the necessary data for the propulsive performances evaluation as well as for the propeller final design. The reported work allows not only the performance evaluation for the overall performances of a hull, but also leads to the development, implementation and validation of new concepts in modeling the turbulent vortical flows, with direct connection to the ship propulsion problem.

46 CFR 42.09-30 - Additional survey requirements for steel-hull vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Additional survey requirements for steel-hull vessels...-30 Additional survey requirements for steel-hull vessels. (a) In addition to the requirements in § 42...) When the vessel is in drydock, the hull plating, etc., shall be examined. (c) The holds, 'tween decks...

Estimating core inflation : the role of oil price shocks and imported inflation

OpenAIRE

Bjørnland, Hilde Christiane

1997-01-01

This paper calculates core inflation, by imposing long run restrictions on a structural vector autoregression (VAR) model containing the growth rate of output, inflation and oil prices. Core inflation is identified as that component in inflation that has no long run effect on output. No restrictions are placed on the response of output and inflation to the oil price shocks. The analysis is applied to Norway and the United Kingdom, both oil producing OECD countries. A model that ...

Structural Testing of a 6m Hypersonic Inflatable Aerodynamic Decelerator System

Science.gov (United States)

Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.

2015-01-01

NASA is developing low ballistic coefficient technologies to support the Nations long-term goal of landing humans on Mars. Current entry, decent, and landing technologies are not practical for this class of payloads due to geometric constraints dictated by current and future launch vehicle fairing limitations. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are being developed to circumvent this limitation and are now considered a leading technology to enable landing of heavy payloads on Mars. At the beginning of 2014, a 6m diameter HIAD inflatable structure with an integrated flexible thermal protection system (TPS) was subjected to a static load test series to verify its structural performance under flight-relevant loads. The inflatable structure was constructed into a 60 degree sphere-cone configuration using nine inflatable torus segments composed of fiber-reinforced thin films. The inflatable tori were joined together using adhesives and high-strength textile woven structural straps. These straps help distribute the load throughout the inflatable structure. The 6m flexible TPS was constructed using multiple layers of high performance materials that are designed to protect the inflatable structure from heat loads that would be seen in flight during atmospheric entry. A custom test fixture was constructed to perform the static load test series. The fixture consisted of a round structural tub with enough height and width to allow for displacement of the HIAD test article as loads were applied. The bottom of the tub rim had an airtight seal with the floor. The rigid centerbody of the HIAD was mounted to a pedestal in the center of the structural tub. Using an impermeable membrane draped over the HIAD test article, an airtight seal was created with the top rim of the static load tub. This seal allowed partial vacuum to be pulled beneath the HIAD resulting in a uniform static pressure load applied to the outer surface. Using this technique, the test article

Development of hull compaction system for nuclear recycle facility

International Nuclear Information System (INIS)

Manole, A.A.; Karkhanis, P.P.; Agarwal, Kailash; Basu, Sekhar

2013-01-01

India has adopted closed fuel cycle strategy for efficient management of available resources to meet long term energy requirements. Nuclear Recycle Facility (NRF) provides a vital link in three-stage Indian nuclear power programme. In a NRF for PHWR fuel cycle, reprocessing of spent fuel bundles from PHWRs is carried out using a chop-leach process where the spent fuel bundles are chopped into small pieces using a spent fuel chopper and the contents inside the zircaloy clad are dissolved using concentric nitric acid. This process generates empty zircaloy shells called 'hulls'. The present practice followed for management of hulls is to transfer them into SS drums and store these drums in underground RCC tile holes at a Waste Management Facility (WMF). This waste needs to be stored in an engineered WMF for at least 30-60 years before transferred to a final repository. The storage volumes required for this hull waste will keep increasing as the reprocessing capacity is being enhanced multi-folds. Compaction of hull waste has been employed internationally to reduce the volume required for storage. Hence indigenous development of hull compaction system was initiated by NRB to meet the future requirements. This is being achieved through a set of experiments and analysis with the available resources within the country. This paper describes the process of compaction, conceptualization of the system and benefits accrued from it. (author)

Eternal extended inflation and graceful exit from old inflation without Jordan-Brans-Dicke

International Nuclear Information System (INIS)

Linde, A.

1990-01-01

Recently a possible solution to the graceful exit problem of the old inflation was proposed in the context of the Jordan-Brans-Dicke theory (extended inflation). In this paper we will argue that inflation in this theory occurs in a most natural way if it starts near the Planck density, as in the standard version of chaotic inflation. With most natural initial conditions, the inflationary universe in the JBD theory enters the stage of permanent reproduction of new inflationary domains (eternal extended inflation). In order to realize the extended inflation scenario at least two classical scalar fields driving inflation are necessary, as distinct from the simplest versions of new and chaotic inflation. It is shown that in the theory of two scalar fields one can solve the graceful exit problem even without modifying the Einstein gravity theory, due to the possibility that the decay rate of the false vacuum in old inflation depends on the value of the second scalar field and hence on time. (orig.)

On Rational Design of Double Hull Tanker Structures against Collision

DEFF Research Database (Denmark)

Paik, Jeom Kee; Chung, Jang Young; Choe, Ich Hung

1999-01-01

This paper is a summary of recent research and development in areas related to the design technology for double hull tanker structures against low energy collision, jointly undertaken by the Hyundai Heavy Industries, the American Bureau of Shipping, the Technical University of Denmark and the Pusan...... in the present study were (i) developing a framework for the collision design procedure for double hull tanker structures, (ii) experimental investigation of the structural crashworthiness of the collided vessels in collision or stranding, using double skinned structural models, (iii) validation of the special...... investigation of the energy absorption capability characteristics of a collided double hull VLCC side structure in collision, and (vi) development of a new modified Minorsky method for double hull tanker side structures. The tools developed and the results and insights obtained by the present study should...

A Fast Algorithm of Convex Hull Vertices Selection for Online Classification.

Science.gov (United States)

Ding, Shuguang; Nie, Xiangli; Qiao, Hong; Zhang, Bo

2018-04-01

Reducing samples through convex hull vertices selection (CHVS) within each class is an important and effective method for online classification problems, since the classifier can be trained rapidly with the selected samples. However, the process of CHVS is NP-hard. In this paper, we propose a fast algorithm to select the convex hull vertices, based on the convex hull decomposition and the property of projection. In the proposed algorithm, the quadratic minimization problem of computing the distance between a point and a convex hull is converted into a linear equation problem with a low computational complexity. When the data dimension is high, an approximate, instead of exact, convex hull is allowed to be selected by setting an appropriate termination condition in order to delete more nonimportant samples. In addition, the impact of outliers is also considered, and the proposed algorithm is improved by deleting the outliers in the initial procedure. Furthermore, a dimension convention technique via the kernel trick is used to deal with nonlinearly separable problems. An upper bound is theoretically proved for the difference between the support vector machines based on the approximate convex hull vertices selected and all the training samples. Experimental results on both synthetic and real data sets show the effectiveness and validity of the proposed algorithm.

Lightweight hull surface self-design vertical parameterization method based on NURBS

Directory of Open Access Journals (Sweden)

ZHANG Yanru

2017-10-01

Full Text Available [Objectives] At present, conventional design is limited to parent ship design space, and cannot drive ship hull design using as few parameters as possible. In order to solve the above problems, [Methods] by combining the draught function with NURBS, a ship hull surface self-design method based on vertical parameterization is proposed. In this method, the waterline is designated as the basic design unit; the bottom flat end line, designed waterline, stem and stern contours, side flat end line and maximum section line are designated as the characteristic constraints of the ship hull; and the draught function values corresponding to the characteristic parameters are designated as the design objectives. In this way, a waterline approximation model is built, and an evolutionary algorithm can be used to solve the approximation model. Finally, the ship hull surface is generated on the basis of the waterline using the NURBS skinning technique.[Results] The design examples of the characteristic curves of the full-scale ship hull surface indicate the practicable and advanced nature of this method.[Conclusions] The hull surface can be designed with as little data as possible using this method, making it much more suitable for the self-design of new ship forms.

The study on radioactivity reduction of spent PWR cladding hull

International Nuclear Information System (INIS)

Jung, I. H.; Kim, J. H.; Park, C. J.; Jung, Y. H.; Song, K. C.; Lee, J. W.; Park, J. J.; Yang, M. S.

2003-01-01

Hull arising from the spent PWR fuel elements is classified as a high-level radioactive waste. This report describes the radio-chemical characteristics of the hull-from PWR spent fuel of 32,000MWd/tU burn-up and 15 years cooling, discharged from Gori Unit I cycled 4-7-by examination and literature survey. On the basis of the results, a method of degradation to middle and low-level radioactive waste was proposed by dry process such as laser or plasma technique with removing the nuclides deposited on the surface of the hull

Corn fiber hulls as a food additive or animal feed

Science.gov (United States)

Abbas, Charles; Beery, Kyle E.; Cecava, Michael J.; Doane, Perry H.

2010-12-21

The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

Double inflation

International Nuclear Information System (INIS)

Silk, J.; Turner, M.S.

1986-04-01

The Zel'dovich spectrum of adiabatic density perturbations is a generic prediction of inflation. There is increasing evidence that when the spectrum is normalized by observational data on small scales, there is not enough power on large scales to account for the observed large-scale structure in the Universe. Decoupling the spectrum on large and small scales could solve this problem. As a means of decoupling the large and small scales we propose double inflation (i.e., two episodes of inflation). In this scenario the spectrum on large scales is determined by the first episode of inflation and those on small scales by a second episode of inflation. We present three models for such a scenario. By nearly saturating the large angular-scale cosmic microwave anisotropy bound, we can easily account for the observed large-scale structure. We take the perturbations on small scales to be very large, deltarho/rho approx. = 0.1 to 0.01, which results in the production of primordial black holes (PBHs), early formation of structure, reionization of the Universe, and a rich array of astrophysical events. The Ω-problem is also addressed by our scenario. Allowing the density perturbations produced by the second episode of inflation to be large also lessens the fine-tuning required in the scalar potential and makes reheating much easier. We briefly speculate on the possibility that the second episode of inflation proceeds through the nucleation of bubbles, which today manifest themselves as empty bubbles whose surfaces are covered with galaxies. 37 refs., 1 fig

Nuclear fuel pellet sintering boat unloading apparatus and method

International Nuclear Information System (INIS)

Huggins, T.B.; Widener, W.H.; Klapper, K.K.

1990-01-01

This patent describes a method for unloading nuclear fuel pellets from a sintering boat having an open top. It comprises: pivoting a transfer housing loaded with the boat filled with nuclear fuel pellets about a generally horizontal axis from an upright position remote from a pellet deposit surface to an inverted position adjacent to the deposit surface to move the boat from an upright to inverted orientation with the pellets retained within the boat by a latched lid in a closed condition on the housing; unlatching the lid of the housing as the housing reaches its inverted position but engaging the unlatched lid with the deposit surface to retain it in its closed condition; and reverse pivoting the housing from its inverted position back toward its upright position to permit the unlatched lid to pivot from the closed condition to an opened condition thereby allowing pellets to slide out of the open top of the inverted boat and down the opened lid of the housing to the deposit site

77 FR 17084 - National Boating Safety Advisory Council

Science.gov (United States)

2012-03-23

... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2010-0164] National Boating Safety..., Virginia, to discuss issues relating to recreational boating safety. The meetings will be open to the... Arlington, 4610 N. Fairfax Drive, Arlington, VA 22203. The hotel's Web site is: http://www.hiarlington.com...

A Fiber-Optic Tether for the Hull Search UUV System Documentation

National Research Council Canada - National Science Library

Buescher, J. G

2006-01-01

...) conducting ship hull inspection missions, defines the required specifications that will allow the integration and installation of a FO tether system on UUVs with ship hull inspection capability...

Of Curriculum Conceptions, Orientations, and Cultures: A Rejoinder to John E. Hull

Science.gov (United States)

Van Brummelen, Harro

2009-01-01

In this article, the author presents a rejoinder to John E. Hull. Van Brummelen first states his appreciation of John Hull's thoughtful evaluation of his views of curriculum, views in which many Christian educators have played a part. It has been several decades since the author spelled out what Hull calls an "education for discipleship"…

46 CFR 199.160 - Rescue boat embarkation, launching and recovery arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Rescue boat embarkation, launching and recovery...) LIFESAVING APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Requirements for All Vessels § 199.160 Rescue boat embarkation, launching and recovery arrangements. (a) Each rescue boat must...

Formation of ferric flocks for the removal of Zn and Cu from dockyard wastewater

DEFF Research Database (Denmark)

Ottosen, Lisbeth M.; Arevalo, Edurado; Stichnothe, Heinz

2006-01-01

Wastewater from wash down of boat hulls contains typically Cu, Zn and organometallic biocides, e.g. tributyltin (TBT). In some cases this wastewater is led directly into the marine system. In the present paper a cheap flocculation method (iron flocculants) for removal of Cu and Zn from the wastew......Wastewater from wash down of boat hulls contains typically Cu, Zn and organometallic biocides, e.g. tributyltin (TBT). In some cases this wastewater is led directly into the marine system. In the present paper a cheap flocculation method (iron flocculants) for removal of Cu and Zn from...

Dating the Bibong-ri Neolithic site in Korea: Excavating the oldest ancient boat

International Nuclear Information System (INIS)

Park, Gyujun; Kim, Jong-Chan; Youn, Minyoung; Yun, Chongcheol; Kang, Jin; Song, Yong-Mi; Song, Su-Jin; Noh, Hye-Jin; Kim, Do-Kyun; Im, Hack-Jong

2010-01-01

The remains of an ancient wooden boat were unearthed at the Bibong-ri shell mound site. The site was located at Bibong-ri, Bugog-myeon, Changnyeong-gun, Gyeongsangnam-do in South Korea. A substantial fragment of the vessel was discovered in the lowest layer of the site. We collected 17 samples of charcoal and wood from pebble, sand, and shell layers. Sample preparation extracted the carbon from each sample material and converted it into graphite for AMS radiocarbon dating. Radiocarbon dates of the samples indicate that they belong to the Neolithic period and that the boat dates from ca. 5700 BC. To this point, the oldest known boat in the world has been a wooden boat dating from ca. 5500 BC in China. Other ancient boats from around the world include a logboat dating from ca. 3600 BC in Japan and a fleet of wooden boats dating from ca. 3000 BC in Egypt. The Bibong-ri boat is the first boat from the Neolithic period ever found in South Korea and must represent one of the world's oldest known boats.

Inflation targeting and inflation performance : a comparative analysis

NARCIS (Netherlands)

Samarina, Anna; De Haan, Jakob; Terpstra, M.

2014-01-01

This article examines how the impact of inflation targeting on inflation performance depends on the choice of country samples, adoption dates, time periods and methodological approaches. We apply two different estimation methods - difference-in-differences and propensity score matching - for our

46 CFR 115.660 - Continued participation in the Alternative Hull Examination (AHE) Program.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Continued participation in the Alternative Hull... MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.660 Continued participation in the Alternative Hull Examination (AHE) Program. (a) To continue to participate in...

46 CFR 176.660 - Continued participation in the Alternative Hull Examination (AHE) Program.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Continued participation in the Alternative Hull... (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.660 Continued participation in the Alternative Hull Examination (AHE) Program. (a) To...

In-Water Hull Cleaning & Filtration System

Science.gov (United States)

George, Dan

2015-04-01

Dan George R & D Mining Technology LinkedIn GRD Franmarine have received the following prestigious awards in 2014 for their research & development of an in-water hull cleaning and filtration system "The Envirocart: Golden Gecko Award for Environmental Excellence; WA Innovator of the Year - Growth Sector; Department of Fisheries - Excellence in Marine Biosecurity Award - Innovation Category; Lloyd's List Asia Awards - Environmental Award; The Australian Innovation Challenge - Environment, Agriculture and Food Category; and Australian Shipping and Maritime Industry Award - Environmental Transport Award. The Envirocart developed and patented by GRD Franmarine is a revolutionary new fully enclosed capture and containment in-water hull cleaning technology. The Envirocart enables soft Silicon based antifouling paints and coatings containing pesticides such as Copper Oxide to be cleaned in situ using a contactless cleaning method. This fully containerised system is now capable of being deployed to remote locations or directly onto a Dive Support Vessel and is rated to offshore specifications. This is the only known method of in-water hull cleaning that complies with the Department of Agriculture Fisheries and Forestry (DAFF) and Department of Fisheries WA (DoF) Guidelines. The primary underwater cleaning tool is a hydraulically powered hull cleaning unit fitted with rotating discs. The discs can be fitted with conventional brushes for glass or epoxy based coatings or a revolutionary new patented blade system which can remove marine biofouling without damaging the antifouling paint (silicone and copper oxide). Additionally there are a patented range of fully enclosed hand cleaning tools for difficult to access niche areas such as anodes and sea chests, providing an innovative total solution that enables in-water cleaning to be conducted in a manner that causes no biological risk to the environment. In full containment mode or when AIS are present, material is pumped

Eternal extended inflation and graceful exit from old inflation without Jordan-Brans-Dicke

Science.gov (United States)

Linde, Andrei

1990-10-01

Recently a possible solution to the graceful exit problem of the old inflation was proposed in the context of the Jordan-Brans-Dicke theory (extended inflation). In this paper we will argue that inflation in this theory occurs in a most natural way if it starts near the Planck density, as in the standard version of chaotic inflation. With most natural initial conditions, the inflationary universe in the JBD theory enters the stage of permanent reproduction of new inflationary domains (eternal extended inflation). In order to realize the extended inflation scenario at least two classical scalar fields driving inflation are necessary, as distinct from the simplest versions of new and chaotic inflation. It is shown that in the theory of two scalar fields one can solve the graceful exit problem even without modifying the Einstein gravity theory, due to the possibility that the decay rate of the false rate vacuum in old inflation depends on the value of the second scalar field and hence on time. Address after 1 September 1990: Physics Department, Stanford University, Varian Building, Stanford, CA 94305, USA.

Solid-state fermentation of Mortierella isabellina for lipid production from soybean hull.

Science.gov (United States)

Zhang, Jianguo; Hu, Bo

2012-02-01

Soybean hull, generated from soybean processing, is a lignocellulosic material with limited industrial applications and little market value. This research is exploring a new application of soybean hull to be converted to fungal lipids for biodiesel production through solid-state fermentation. Mortierella isabellina was selected as the oil producer because of its high lipid content at low C/N ratio. Several cultivation factors were investigated, including moisture content, inoculums size, fungal spore age, and nutrient supplements, in an attempt to enhance the lipid production of the solid-state fermentation process. The results showed that lipid production with the increase of the moisture content and the spore age, while decreased as the size of inoculums increased. Nutrients addition (KH₂PO₄ 1.2 mg and MgSO₄ 0.6 mg/g soybean hull) improved the lipid production. The total final lipid reached 47.9 mg lipid from 1 g soybean hull after the conversion, 3.3-fold higher than initial lipid reserve in the soybean hull. The fatty acid profile analysis indicated that fatty acid content consisted of 30.0% of total lipid, and 80.4% of total fatty acid was C16 and C18. Therefore, lipid production from soybean hull is a possible option to enable soybean hull as a new resource for biodiesel production and to enhance the overall oil production from soybeans.

Management of cladding hulls and fuel hardware

International Nuclear Information System (INIS)

1985-01-01

The reprocessing of spent fuel from power reactors based on chop-leach technology produces a solid waste product of cladding hulls and other metallic residues. This report describes the current situation in the management of fuel cladding hulls and hardware. Information is presented on the material composition of such waste together with the heating effects due to neutron-induced activation products and fuel contamination. As no country has established a final disposal route and the corresponding repository, this report also discusses possible disposal routes and various disposal options under consideration at present

Determination of digestibility of almond hull in sheep | Yalchi ...

African Journals Online (AJOL)

Chemical compositions of almond hull and alfalfa hay were determined. The crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) of almond hull were lower than those of alfalfa hay but the non fibrous carbohydrate (NFC) was more than that of alfalfa hay (3.5 times) (P < 0.01). The dry matter ...

Full scale leak test of the MEGAPIE containment hull

Energy Technology Data Exchange (ETDEWEB)

Samec, K

2006-07-15

The Full Scale Leak Test (FSLT) experiment is designed to replicate an accidental leak of Lead-Bismuth Eutectic (LBE) liquid metal from the MEGAPIE neutron spallation source. The neutron source is totally encased in an aluminum containment hull cooled by heavy water. Any liquid metal which would, in a hypothetical accident, leak into the helium-filled insulation gap between the source and the aluminum containment hull, would immediately impact the hull. Furthermore, during irradiation in the PSI SINQ facility, the LBE in the MEGAPIE Lower Liquid Metal Container (LLMC) accumulates radio-active substances which, in the event of a leak, must be cooled and contained under controlled conditions, as they may otherwise contaminate the facility. The FSLT experiment has been devised to fully test the structural integrity of the containment hull against a sudden liquid metal leak, and in addition, to resolve the peak temperature of he coolant, to validate the sensors used in detecting a leak and of proof-test the analytical methods used in predicting the consequences of a leak. The FSLT experiment has been analysed ahead of the test, and both thermal and structural aspects calculated using commercial codes. The predictions applied conservative assumptions to the analysis of the thermal shock so as to preclude the likelihood of an unforeseen failure of the hull. In this document, these initial predictions are compared to the temperature and strain data recorded in the experiment. Further analysis, to be published at a later stage, will focus on applying actual conditions realised in the experiment, as opposed to the envelope case used in the test predictions. The integrity of the containment hull under loads resulting from liquid metal-leak is therefore the focal point of the experiment described in the current document, and serves as a key reference test for the Iicensing of the facility. The data recorded during the SLT experiment shows that the MEGAPIE containment hull is

Full scale leak test of the MEGAPIE containment hull

International Nuclear Information System (INIS)

Samec, K.

2006-07-01

The Full Scale Leak Test (FSLT) experiment is designed to replicate an accidental leak of Lead-Bismuth Eutectic (LBE) liquid metal from the MEGAPIE neutron spallation source. The neutron source is totally encased in an aluminum containment hull cooled by heavy water. Any liquid metal which would, in a hypothetical accident, leak into the helium-filled insulation gap between the source and the aluminum containment hull, would immediately impact the hull. Furthermore, during irradiation in the PSI SINQ facility, the LBE in the MEGAPIE Lower Liquid Metal Container (LLMC) accumulates radio-active substances which, in the event of a leak, must be cooled and contained under controlled conditions, as they may otherwise contaminate the facility. The FSLT experiment has been devised to fully test the structural integrity of the containment hull against a sudden liquid metal leak, and in addition, to resolve the peak temperature of he coolant, to validate the sensors used in detecting a leak and of proof-test the analytical methods used in predicting the consequences of a leak. The FSLT experiment has been analysed ahead of the test, and both thermal and structural aspects calculated using commercial codes. The predictions applied conservative assumptions to the analysis of the thermal shock so as to preclude the likelihood of an unforeseen failure of the hull. In this document, these initial predictions are compared to the temperature and strain data recorded in the experiment. Further analysis, to be published at a later stage, will focus on applying actual conditions realised in the experiment, as opposed to the envelope case used in the test predictions. The integrity of the containment hull under loads resulting from liquid metal-leak is therefore the focal point of the experiment described in the current document, and serves as a key reference test for the Iicensing of the facility. The data recorded during the SLT experiment shows that the MEGAPIE containment hull is

46 CFR 71.15-1 - Standards in inspection of hulls, boilers, and machinery.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery..., boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the standards... and inspection of hulls, boilers, and machinery, and the certificate of classification referring...

46 CFR 176.650 - Alternative Hull Examination Program options: Divers or underwater ROV.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Alternative Hull Examination Program options: Divers or...) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.650 Alternative Hull Examination Program options: Divers or underwater ROV. To complete the...

46 CFR 133.160 - Rescue boat embarkation, launching and recovery arrangements.

Science.gov (United States)

2010-10-01

...) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.160 Rescue boat embarkation, launching and recovery arrangements. (a) Each davit for a rescue boat must be approved under approval series... 46 Shipping 4 2010-10-01 2010-10-01 false Rescue boat embarkation, launching and recovery...

Effect of ship hull form on the resistance penalty from biofouling.

Science.gov (United States)

Oliveira, Dinis; Larsson, Ann I; Granhag, Lena

2018-03-01

Hull biofouling is a well-known problem for the shipping industry, leading to increased resistance and fuel consumption. Considering that the effects of hull form on resistance are known to be higher for a less slender hull, it is hypothesised in this paper that the effect of biofouling roughness on resistance is also dependent on the hull form. To test this hypothesis, previously reported full-scale numerical results on a containership are re-analysed. Form effects on roughness penalties, corresponding to K ΔCT  = 0.058 ± 0.025, are observed at a low speed (19 knots, Re s  = 2.29 × 10 9 ), which are however cancelled out by traditionally neglected roughness effects on wave-making resistance at a higher speed (24 knots, Re s  = 2.89 × 10 9 ). It is concluded that hull form effects on biofouling penalties can be significant at low speeds, though not generalisable for higher speeds, namely when wave-making resistance corresponds to ≥ 29% of total resistance.

Quintessential inflation: A unified scenario of inflation and dark energy

Directory of Open Access Journals (Sweden)

Hossain Wali

2018-01-01

Full Text Available Quintessential inflation unifies inflation and late time acceleration by a single scalar field. Such a scenario, with canonical and non-canonical scalar fields, has been discussed. The scalar field behaves as an inflaton field during inflation and as a quintessence field during late time. Also the predictions of the models has been compared with the recent Planck data.

Blending Biodiesel in Fishing Boat Fuels for Improved Fuel Characteristics

International Nuclear Information System (INIS)

Lin, Cherng-Yuan

2014-01-01

Biodiesel is a renewable, clean, alternative energy source with advantages, such as excellent lubricity, superior biodegradability, and high combustion efficiency. Biodiesel is considered for mixing with fishing boat fuels to adjust their fuel characteristics so that toxic pollutants and greenhouse-effect gas emissions from such shipping might be reduced. The effects of blending fishing boat fuels A and B with various weight proportions of biodiesel are experimentally investigated in this study. The results show that biodiesel blending can significantly improve the inferior fuel properties of both fishing boat fuels and particularly fuel B. The flash points of both of these fuels increases significantly with the addition of biodiesel and thus enhances the safety of transporting and storing these blended fuels. The flash point of fishing boat fuel B even increases by 16% if 25 wt.% biodiesel is blended. The blending of biodiesel with no sulfur content is found to be one of the most effective ways to reduce the high sulfur content of fishing boat fuel, resulting in a reduction in the emission of sulfur oxides. The addition of only 25 wt.% biodiesel decreased the sulfur content of the fishing boat fuel by 37%. The high kinematic viscosity of fishing boat fuel B was also observed to be reduced by 63% with the blending of just 25 wt.% biodiesel. However, biodiesel blending caused a slight decrease in heating value around 1–4.5%.

Blending Biodiesel in Fishing Boat Fuels for Improved Fuel Characteristics

Energy Technology Data Exchange (ETDEWEB)

Lin, Cherng-Yuan, E-mail: lin7108@ntou.edu.tw [Department of Marine Engineering, National Taiwan Ocean University, Keelung, Taiwan (China)

2014-02-24

Biodiesel is a renewable, clean, alternative energy source with advantages, such as excellent lubricity, superior biodegradability, and high combustion efficiency. Biodiesel is considered for mixing with fishing boat fuels to adjust their fuel characteristics so that toxic pollutants and greenhouse-effect gas emissions from such shipping might be reduced. The effects of blending fishing boat fuels A and B with various weight proportions of biodiesel are experimentally investigated in this study. The results show that biodiesel blending can significantly improve the inferior fuel properties of both fishing boat fuels and particularly fuel B. The flash points of both of these fuels increases significantly with the addition of biodiesel and thus enhances the safety of transporting and storing these blended fuels. The flash point of fishing boat fuel B even increases by 16% if 25 wt.% biodiesel is blended. The blending of biodiesel with no sulfur content is found to be one of the most effective ways to reduce the high sulfur content of fishing boat fuel, resulting in a reduction in the emission of sulfur oxides. The addition of only 25 wt.% biodiesel decreased the sulfur content of the fishing boat fuel by 37%. The high kinematic viscosity of fishing boat fuel B was also observed to be reduced by 63% with the blending of just 25 wt.% biodiesel. However, biodiesel blending caused a slight decrease in heating value around 1–4.5%.

Squaraine rotaxanes with boat conformation macrocycles.

Science.gov (United States)

Fu, Na; Baumes, Jeffrey M; Arunkumar, Easwaran; Noll, Bruce C; Smith, Bradley D

2009-09-04

Mechanical encapsulation of fluorescent, deep-red bis(anilino)squaraine dyes inside Leigh-type tetralactam macrocycles produces interlocked squaraine rotaxanes. The surrounding macrocycles are flexible and undergo rapid exchange of chair and boat conformations in solution. A series of X-ray crystal structures show how the rotaxane co-conformational exchange process involves simultaneous lateral oscillation of the macrocycle about the center of the encapsulated squaraine thread. Rotaxane macrocycles with 1,4-phenylene sidewalls and 2,6-pyridine dicarboxamide bridging units are more likely to adopt boat conformations in the solid state than analogous squaraine rotaxane systems with isophthalamide-containing macrocycles. A truncated squaraine dye, with a secondary amine attached directly to the central C(4)O(2) core, is less electrophilic than the extended bis(anilino)squaraine analogue, but it is still susceptible to chemical and photochemical bleaching. Its stability is greatly enhanced when it is encapsulated as an interlocked squaraine rotaxane. An X-ray crystal structure of this truncated squaraine rotaxane shows the macrocycle in a boat conformation, and NMR studies indicate that the boat is maintained in solution. Encapsulation as a rotaxane increases the dye's brightness by a factor of 6. The encapsulation process appears to constrain the dye and reduce deformation of the chromophore from planarity. This study shows how mechanical encapsulation as a rotaxane can be used as a rational design parameter to fine-tune the chemical and photochemical properties of squaraine dyes.

Boat, wake, and wave real-time simulation

Science.gov (United States)

Świerkowski, Leszek; Gouthas, Efthimios; Christie, Chad L.; Williams, Owen M.

2009-05-01

We describe the extension of our real-time scene generation software VIRSuite to include the dynamic simulation of small boats and their wakes within an ocean environment. Extensive use has been made of the programmabilty available in the current generation of GPUs. We have demonstrated that real-time simulation is feasible, even including such complexities as dynamical calculation of the boat motion, wake generation and calculation of an FFTgenerated sea state.

Kaehler-driven tribrid inflation

International Nuclear Information System (INIS)

Antusch, Stefan; Nolde, David

2012-01-01

We discuss a new class of tribrid inflation models in supergravity, where the shape of the inflaton potential is dominated by effects from the Kaehler potential. Tribrid inflation is a variant of hybrid inflation which is particularly suited for connecting inflation with particle physics, since the inflaton can be a D-flat combination of charged fields from the matter sector. In models of tribrid inflation studied so far, the inflaton potential was dominated by either loop corrections or by mixing effects with the waterfall field (as in 'pseudosmooth' tribrid inflation). Here we investigate the third possibility, namely that tribrid inflation is dominantly driven by effects from higher-dimensional operators of the Kaehler potential. We specify for which superpotential parameters the new regime is realized and show how it can be experimentally distinguished from the other two (loop-driven and p seudosmooth ) regimes

Towards inflation targeting in Egypt: the relationship between exchange rate and inflation

Directory of Open Access Journals (Sweden)

Aliaa Khodeir

2012-08-01

Full Text Available Since the Egyptian economy has recently moved towards inflation targeting, it became very important to know whether exchange rate movements have serious inflationary implications or not. To investigate this subject, the study aims to analyse the relevance of inflation with the exchange rate by using the Granger-causality test. Two indicators of inflation will be used, the consumer price index (CPI and wholesale price index (WPI. In general, the results show a strong relationship between the two variables in a way that may give support to the application of ‘flexible inflation targeting regime instead of strict inflation targeting regime’.

Decontamination of fast reactor hulls and properties of immobilised waste forms

International Nuclear Information System (INIS)

Biddle, P.; Brown, P.E.; Rees, J.H.

1984-01-01

The objectives of this contract are threefold: (i) to characterise the activities associated with genuine hulls generated in reprocessing fuel from the Prototype Fast Reactor; (ii) to examine the feasibility of decontaminating the hulls by the use of simple low-temperature techniques; and (iii) to immobilise the hulls in cement and evaluate the products. Over the last year, work has concentrated in areas (i) and (ii), but the balance of the programme is now shifting more towards topic (iii). Progress is reported. (author)

David Hull's generalized natural selection as an explanation for scientific change

Science.gov (United States)

Little, Michelle Yvette

2001-10-01

Philosophers of science such as Karl Popper and Thomas Kuhn have employed evolutionary idiom in describing scientific change. In Science as a Process (1988) Hull makes evolutionary theory explanatorily applicable. He modifies key evolutionary terms in order that both biological evolution and scientific change are instances of a general selection process. According to Hull, because of naturally-existing competition for credit among researchers and the professional lineages they constitute, scientists are constrained to cooperate and collaborate. This process entails two important philosophical consequences. First, it allows for a natural justification of why the sciences can provide objective empirical knowledge. Second, appreciating its strength means that a philosophical analysis of scientific change is solidly difficult features to combine. I work on strengthening two weaknesses in Hull's arguments. First, operating in his analysis is an unexplicated notion of ``information'' running parallel to the equally opaque notion of genetic information. My third chapter provides a clear account of ``genetic information'' whose usefulness extends beyond the assistance it can render Hull as a clear concept is needed in biological contexts as well. The fourth and fifth chapters submit evidence of scientific change from radio astronomy. Hull insists on empirical backing for philosophical theses but his own book stands to suffer from selection effects as it offers cases drawn from a single subspecialty in the biological sciences. I found that in the main scientists and the change they propel accords well with Hull's explanation. However, instances of major change reveal credit- and resource-sharing to a degree contrary with what Hull would expect. My conclusion is that the naturalness of competition, instantiated during the course of standardized and relatively ``normal'' scientific research, is not the norm during periods of new research and its uncertain standards of

Dragon Boat Festival.

Science.gov (United States)

Lew, Gordon

This is one of a series of elementary readers written in Cantonese and English and designed to familiarize children with the traditional major Chinese festivals celebrated by the Chinese in America. This booklet describes the celebration of the Dragon Boat Festival, which marks the beginning of summer. A brief background to the festival is…

Hulled and hull-less barley grains with the genetic trait for low-phytic acid increased the apparent total-tract digestibility of phosphorus and calcium in diets for young swine.

Science.gov (United States)

Veum, T L; Raboy, V

2016-03-01

A 35-d experiment was conducted using 63 crossbred pigs (35 barrows and 28 gilts) with an initial average BW of 7.0 kg and age of 28 d to evaluate the efficacy of the low-phytic acid (LPA) genetic trait in hulled or hull-less barley in isocaloric diets. Hulled barleys were the normal barley (NB) cultivar Harrington and the near-isogenic LPA mutant 955 (M955) with P availabilities of 36 and 95%, respectively. Hull-less lines were produced by crossing NB and the LPA mutant 422 line with a hull-less line, producing hull-less NB (HNB) and hull-less mutant 422 (HM422) with P availabilities of 41 and 66%, respectively. Pigs were in individual metabolism cages or pens for Phase 1 (d 0 to 14) and Phase 2 (d 14 to 35). Diets defined as NB, HNB, HM422, or M955 with no added inorganic P (iP) had available P (aP) concentrations of 0.27, 0.28, 0.35, and 0.40% for Phase 1 and 0.15, 0.17, 0.23, and 0.31% for Phase 2, respectively. Only diet M955 was adequate in aP. Therefore, iP was added to the P-deficient diets to make diets NB + iP, HNB + iP, and HM422 + iP with aP equal to that in diet M955. Overall (d 0 to 35), ADG and G:F were greater ( hulled and hull-less barley in isocaloric diets fed to young pigs. Pigs fed the diet with LPA M955 consumed 31% less P and excreted 78% less fecal P and 30% less fecal Ca than pigs fed the diet with NB + iP that was equal to diet M955 in aP. Therefore, LPA barley, especially M955 with 95% aP, will reduce the use of iP in swine diets, reduce P pollution from swine manure, and support the goal of achieving global P sustainability.

Galileon inflation

Energy Technology Data Exchange (ETDEWEB)

Burrage, Clare [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Rham, Claudia de [Univ. de Geneve (Switzerland). Dept. de Physique Theorique; Seery, David [Sussex Univ., Brigthon (United Kingdom). Dept. of Physics and Astronomy; Tolley, Andrew J. [Case Western Reserve Univ., Cleveland, OH (United States). Dept. of Physics

2010-09-15

Galileon inflation is a radiatively stable higher derivative model of inflation. The model is determined by a finite number of relevant operators which are protected by a covariant generalization of the Galileon shift symmetry. We show that the nongaussianity of the primordial density perturbation generated during an epoch of Galileon inflation is a particularly powerful observational probe of these models and that, when the speed of sound is small, f{sub NL} can be larger than the usual result f{sub NL} {proportional_to} C{sup -2}{sub s}. (orig.)

The role of hull in germination and salinity tolerance in some ...

African Journals Online (AJOL)

hulled and dehulled) of sunflower seeds of Opal, Shelly (Confectionary) and Pactol (Oily) were tested to determine the effects of the hull on salinity tolerance during germination. Germination percentage (%), mean germination time (day), root and ...

Connectivity for underway Coast Guard patrol boats

OpenAIRE

Busch, Gregory C.

1997-01-01

Approved for public release; distribution is unlimited This thesis examines the US Coast Guard patrol boat's ability to effectively exchange operational data while underway. The patrol boat is currently unable to obtain tactical law enforcement information from the central Law Enforcement Information System 2 (LEIS 2) database while on patrol. LEIS 2 provides access to law enforcement information from Coast Guard, FBI, and state and local law enforcement agencies. Availability of this info...

Inflation expectations and inflation uncertainty in the Eurozone : Evidence from survey data

NARCIS (Netherlands)

Arnold, I.J.M.; Lemmen, J.J.G.

2006-01-01

This paper uses the European Commission's Consumer Survey to assess whether inflation expectations have converged and whether inflation uncertainty has diminished following the introduction of the Euro in Europe. Consumers' responses to the survey suggest that inflation expectations depend more on

Passive non destructive assay of hull waste by gross neutron counting method

International Nuclear Information System (INIS)

Andola, Sanjay; Sur, Amit; Rawool, A.M.; Sharma, B.; Kaushik, T.C.; Gupta, S.C.; Basu, Sekhar; Raman Kumar; Agarwal, K.

2014-01-01

The special nuclear material accounting (SNMA) is an important and necessary issue now in nuclear waste management. The hull waste generated from dissolution of spent fuel contains small amounts of Uranium and Plutonium and other actinides due to undissolved trapped material inside zircoalloy tubes. We report here on the development of a Passive Hull monitoring system using gross neutron counting technique and its implementation with semiautomatic instrumentation. The overall sensitivity of the 3 He detector banks placed at 75 cm from the centre of loaded hull cask comes out to 5.2 x 10 -3 counts per neutron (c/n) while with standard Pu-Be source placed in same position it comes out to be 3.1 x 10 3 c/n. The difference in the efficiency is mainly because of the differences in the geometry and size of hull cask as well as difference in the energy spectrum of hull waste and Pu-Be source. This is accounted through Monte Carlo computations. The Pu mass in solid waste comes out as expected and varies with the surface dose rate of drum in almost a proportional manner. Being simple and less time consuming, this setup has been installed for routine assay of solid Hull waste at NRB, Tarapur

Inflation expectations and inflation uncertainty in the eurozone : Evidence from survey data

NARCIS (Netherlands)

Arnold, I.J.M.; Lemmen, J.J.G.

2008-01-01

This paper uses the European Commission’s Consumer Survey to assess whether inflation expectations have converged and whether inflation uncertainty has diminished following the introduction of the euro in Europe. Consumers’ responses to the survey suggest that inflation expectations depend more on

News on Inflation and the Epidemiology of Inflation Expectations

DEFF Research Database (Denmark)

Pfajfar, Damjan; Santoro, Emiliano

2013-01-01

This paper examines the nexus between news coverage on inflation and households’ inflation expectations. In doing so, we test the epidemiological foundations of the sticky information model (Carroll ). We use both aggregate and household-level data from the Survey Research Center at the University...... of Michigan. We highlight a fundamental disconnection among news on inflation, consumers’ frequency of expectation updating, and the accuracy of their expectations. Our evidence provides at best weak support to the epidemiological framework, as most of the consumers who update their expectations do not revise...

46 CFR 31.10-20 - Definitions relating to hull examinations-T/B ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Definitions relating to hull examinations-T/B ALL. 31.10... CERTIFICATION Inspections § 31.10-20 Definitions relating to hull examinations—T/B ALL. As used in this part— (a... examination of all accessible parts of the vessel's underwater body and all through-hull fittings. (b...

Retrofitting models of inflation

International Nuclear Information System (INIS)

Kain, Ben

2009-01-01

I use the method of retrofitting, developed by Dine, Feng and Silverstein, to generate the scale of inflation dynamically, allowing it to be naturally small. This is a general procedure that may be performed on existing models of supersymmetric inflation. I illustrate this idea on two such models, one an example of F-term inflation and the other an example of D-term inflation.

46 CFR 176.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Hull and Tailshaft Examinations § 176.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an...

ISOLATION AND CHARACTERIZATION OF NANOFIBRILLATED CELLULOSE FROM OAT HULLS

Directory of Open Access Journals (Sweden)

Giovanni B. Paschoal

2015-05-01

Full Text Available The objectives of this work were to investigate the microstructure, crystallinity and thermal stability of nanofibrillated cellulose obtained from oat hulls using bleaching and acid hydrolysis at a mild temperature (45 ºC followed by ultrasonication. The oat hulls were bleached with peracetic acid, and after bleaching, the compact structure around the cellulosic fibers was removed, and the bundles became individualized. The extraction time (30 or 60 min did not affect the properties of the nanofibrillated cellulose, which presented a higher crystallinity index and thermal stability than the raw material (oat hulls. The nanocellulose formed interconnected webs of tiny fibers with diameters of 70-100 nm and lengths of several micrometers, producing nanofibers with a relatively high aspect ratio, thus indicating that these materials are suitable for polymer reinforcement.

46 CFR 115.650 - Alternative Hull Examination (AHE) Program options: Divers or underwater ROV.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Alternative Hull Examination (AHE) Program options... MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.650 Alternative Hull Examination (AHE) Program options: Divers or underwater ROV. To complete your underwater...

Treatment of stainless steels and zircaloy cladding hulls

International Nuclear Information System (INIS)

Jenkins, I.L.; Taylor, R.F.

1978-01-01

Results are reported on the fissile material content and the distribution of alpha and beta-gamma emitters in both types of cladding. Apart from very small amounts of residual fuel, fissile material is present as a deposit formed during the dissolution of fuel and also as material driven into the cladding by fission recoil. Alpha-emitters penetrate to depths of 1-2 μm into both S.S. and Zircaloy claddings. The surface deposits on individual hulls can be effectively removed by refluxing with nitric acid or by cleaning with nitric acid in an ultrasonic bath. The physical structural and handling behavior of hull assemblies are examined as being of key importance to the establishment of an efficient cleaning process. The reference leaching target is to extract residual fuel fragments and to remove surface deposits. Preferred routes for compaction, drumming, and encapsulation are briefly reviewed with regard to achieving a final package volume half that of the original hulls with associated hardware

Scale-invariant extended inflation

International Nuclear Information System (INIS)

Holman, R.; Kolb, E.W.; Vadas, S.L.; Wang, Y.

1991-01-01

We propose a model of extended inflation which makes use of the nonlinear realization of scale invariance involving the dilaton coupled to an inflaton field whose potential admits a metastable ground state. The resulting theory resembles the Jordan-Brans-Dicke version of extended inflation. However, quantum effects, in the form of the conformal anomaly, generate a mass for the dilaton, thus allowing our model to evade the problems of the original version of extended inflation. We show that extended inflation can occur for a wide range of inflaton potentials with no fine-tuning of dimensionless parameters required. Furthermore, we also find that it is quite natural for the extended-inflation period to be followed by an epoch of slow-rollover inflation as the dilaton settles down to the minimum of its induced potential

46 CFR 176.625 - Eligibility requirements for the Alternative Hull Examination (AHE) Program for certain passenger...

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Eligibility requirements for the Alternative Hull... CERTIFICATION Hull and Tailshaft Examinations § 176.625 Eligibility requirements for the Alternative Hull... if— (1) It is constructed of steel or aluminum; (2) It has an effective hull protection system; (3...

Genetic control of a transition from black to straw-white seed hull in rice domestication.

Science.gov (United States)

Zhu, Bo-Feng; Si, Lizhen; Wang, Zixuan; Zhou, Yan; Zhu, Jinjie; Shangguan, Yingying; Lu, Danfeng; Fan, Danlin; Li, Canyang; Lin, Hongxuan; Qian, Qian; Sang, Tao; Zhou, Bo; Minobe, Yuzo; Han, Bin

2011-03-01

The genetic mechanism involved in a transition from the black-colored seed hull of the ancestral wild rice (Oryza rufipogon and Oryza nivara) to the straw-white seed hull of cultivated rice (Oryza sativa) during grain ripening remains unknown. We report that the black hull of O. rufipogon was controlled by the Black hull4 (Bh4) gene, which was fine-mapped to an 8.8-kb region on rice chromosome 4 using a cross between O. rufipogon W1943 (black hull) and O. sativa indica cv Guangluai 4 (straw-white hull). Bh4 encodes an amino acid transporter. A 22-bp deletion within exon 3 of the bh4 variant disrupted the Bh4 function, leading to the straw-white hull in cultivated rice. Transgenic study indicated that Bh4 could restore the black pigment on hulls in cv Guangluai 4 and Kasalath. Bh4 sequence alignment of all taxa with the outgroup Oryza barthii showed that the wild rice maintained comparable levels of nucleotide diversity that were about 70 times higher than those in the cultivated rice. The results from the maximum likelihood Hudson-Kreitman-Aguade test suggested that the significant reduction in nucleotide diversity in rice cultivars could be caused by artificial selection. We propose that the straw-white hull was selected as an important visual phenotype of nonshattered grains during rice domestication.

76 FR 81959 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2011-12-29

...] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior. ACTION... Sport Fishing and Boating Partnership Council (Council). DATES: The meeting will be held on Wednesday... requirements of the Federal Advisory Committee Act, 5 U.S.C. App., we announce that the Sport Fishing and...

77 FR 26784 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2012-05-07

...-FVWF979209000005D-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... public teleconference of the Sport Fishing and Boating Partnership Council (Council). DATES... accordance with the requirements of the Federal Advisory Committee Act, 5 U.S.C. App., we announce that Sport...

78 FR 4161 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2013-01-18

...-FVWF97920900000-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... public teleconference of the Sport Fishing and Boating Partnership Council (Council). DATES... accordance with the requirements of the Federal Advisory Committee Act, 5 U.S.C. App., we announce that Sport...

News on Inflation and the Epidemiology of Inflation Expectations

NARCIS (Netherlands)

Pfajfar, D.; Santoro, E.

2012-01-01

Abstract: This paper examines the nexus between news coverage on inflation and households' inflation expectations. In doing so, we test the epidemiological foundations of the sticky information model (Carroll, 2003, 2006). We use both aggregate and household-level data from the Survey Research

46 CFR 71.50-31 - Continued participation in the Alternative Hull Examination (AHE) program.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Continued participation in the Alternative Hull... the Alternative Hull Examination (AHE) program. (a) To continue to participate in the AHE Program, vessel operators must conduct an annual hull condition assessment. At a minimum, vessel operators must...

Attractors, universality, and inflation

Science.gov (United States)

Downes, Sean; Dutta, Bhaskar; Sinha, Kuver

2012-11-01

Studies of the initial conditions for inflation have conflicting predictions from exponential suppression to inevitability. At the level of phase space, this conflict arises from the competing intuitions of CPT invariance and thermodynamics. After reviewing this conflict, we enlarge the ensemble beyond phase space to include scalar potential data. We show how this leads to an important contribution from inflection point inflation, enhancing the likelihood of inflation to a power law, 1/Ne3. In the process, we emphasize the attractor dynamics of the gravity-scalar system and the existence of universality classes from inflection point inflation. Finally, we comment on the predictivity of inflation in light of these results.

News on inflation and the epidemiology of inflation expectations

NARCIS (Netherlands)

Pfajfar, D.; Santoro, E.

2013-01-01

This paper examines the nexus between news coverage on inflation and households’ inflation expectations. In doing so, we test the epidemiological foundations of the sticky information model (Carroll 2003, 2006). We use both aggregate and household-level data from the Survey Research Center at the

Quagga and zebra mussel risk via veliger transfer by overland hauled boats

Directory of Open Access Journals (Sweden)

Larry B. Dalton

2013-04-01

Full Text Available Invasive quagga and zebra mussels (Dreissena rostriformis bugensis and Dreissena polymorpha, respectively pose a great threat to USwaters. Recreational boats constitute a significant risk for spreading the organisms. Recreational boats circulate large amounts of raw waterwhen in use, and if not drained and dried correctly can transport many mussel larvae, called veligers. Veligers experience very high mortality rates; however, the number of potentially transported veligers can be a serious risk to non-infested bodies of water, especially if multiple boats are involved. The risk of veliger transport was calculated for Lake Mead and Lake Michigan using boat capacities for water circulation and specific veliger density data. Results illustrate the importance of draining, drying, and/or decontaminating recreational boats after use.

Effects of biofouling development on drag forces of hull coatings for ocean-going ships: a review

DEFF Research Database (Denmark)

Lindholdt, Asger; Dam-Johansen, Kim; Olsen, S. M.

2015-01-01

This review presents a systematic overview of the literature and describes the experimental methods used to quantify the drag of hull coatings. It also summarizes the findings of hull coating's drag performance and identifies the main parameters impacting it. The advantages and disadvantages...... of the reported methods listed in this review provide an assessment of the most efficient methods to quantify the drag performance of hull coatings. This review determines that drag performance of hull coating technology varies depending on whether the coating condition is newly applied, after dynamic or static...... seawater exposure. The summarized data reveal that, while several methods have attempted to quantify drag performance of hull coatings, other methods must be explored in order to accurately measure the long-term drag performance of hull coatings in conditions mimicking those that ship hulls encounter...

Quasi-open inflation

CERN Document Server

García-Bellido, J; Montes, X; Garcia-Bellido, Juan; Garriga, Jaume; Montes, Xavier

1998-01-01

We show that a large class of two-field models of single-bubble open inflation do not lead to infinite open universes, as it was previously thought, but to an ensemble of very large but finite inflating `islands'. The reason is that the quantum tunneling responsible for the nucleation of the bubble does not occur simultaneously along both field directions and equal-time hypersurfaces in the open universe are not synchronized with equal-density or fixed-field hypersurfaces. The most probable tunneling trajectory corresponds to a zero value of the inflaton field; large values, necessary for the second period of inflation inside the bubble, only arise as localized fluctuations. The interior of each nucleated bubble will contain an infinite number of such inflating regions of comoving size of order $\\gamma^{-1}$, where $\\gamma$ depends on the parameters of the model. Each one of these islands will be a quasi-open universe. Since the volume of the hyperboloid is infinite, inflating islands with all possible values...

Obtaining high purity silica from rice hulls

Directory of Open Access Journals (Sweden)

José da Silva Júnior

2010-01-01

Full Text Available Many routes for extracting silica from rice hulls are based on direct calcining. These methods, though, often produce silica contaminated with inorganic impurities. This work presents the study of a strategy for obtaining silica from rice hulls with a purity level adequate for applications in electronics. The technique is based on two leaching steps, using respectively aqua regia and Piranha solutions, which extract the organic matrix and inorganic impurities. The material was characterized by Fourier-transform infrared spectroscopy (FTIR, powder x-ray diffraction (XRD, x-ray fluorescence (XRF, scanning electron microscopy (SEM, particle size analysis by laser diffraction (LPSA and thermal analysis.

Production of furfural and ethyl alcohol from cottonseed hulls

Energy Technology Data Exchange (ETDEWEB)

Bobovnikov, B M; Tsirlin, Yu A; Chepigo, S V; Shpuntova, M E

1957-01-01

Cottonseed hulls (8.3 tons per digester) and H/sub 2/SO/sub 4/ solution at temperature of 100/sup 0/ were added to the digester simultaneously. The final H/sub 2/SO/sub 4/ concentration of the charge was approximately 0.7%. The pentosans were hydrolyzed at 133/sup 0/ and 2 atmosphere for 6 hours and 15 minutes, then the temperature was raised to 179/sup 0/ at the top and to 150/sup 0/ at the bottom of the digester for 5 hours and 30 minutes. The hydrolytic products of pentosan were separated, neutralized, and transferred to a dehydration tank. The hexosans were then hydrolyzed at 179 to 187/sup 0/. Dry hulls gave 19.4% of pentose reducing sugars, of which 81.4% were fermented. One ton of dry hulls gave 74 to 79 l. of ethanol. The optimum condition for dehydration was at 165 to 175/sup 0/ for no longer than 4 to 4.5 hours. 2-Furaldehyde was produced in the following steps: the pentosan hydrolyzate was dehydrated with steam, the vapor-furaldehyde mixture was then reheated and finally distilled in a continuous column. The yield of furaldehyde was 36 to 37% of incoming pentoses (7% of dry hulls).

A comparison of inflation expectations and inflation credibility in South Africa: results from survey data

Directory of Open Access Journals (Sweden)

Jannie Rossouw

2011-08-01

Full Text Available This paper reports a comparison of South African household inflation expectations and inflation credibility surveys undertaken in 2006 and 2008. It tests for possible feed-through between inflation credibility and inflation expectations. It supplements earlier research that focused only on the 2006 survey results. The comparison shows that inflation expectations differed between different income groups in both 2006 and 2008. Inflation credibility differed between male and female respondents, but this difference did not feed through to inflation expectations. More periodic survey data will be required for developing final conclusions on the possibility of feed-through effects. To this end the structure of credibility surveys should be reconsidered, as a large percentage of respondents indicated that they ‘don’t know’ whether the historic rate of inflation is an accurate indication of price increases.

Preparing for the America's Cup: A technological and a human challenge

KAUST Repository

Fischer, Martin

2017-01-17

The America\\'s Cup is the pinnacle event in sailing and it is the oldest sports trophy in the world. The trophy was originally awarded in 1851 for a race around the Isle of Wight, which was won by the schooner ﾑAmericaﾒ. It was subsequently renamed after the yacht and was donated to the New York Yacht Club under the terms of the Deed of Gift, which made the Cup available for perpetual international competition. The 35th America\\'s Cup will be held in May / June 2017 in Bermuda. The races will be sailed in 50-ft foiling catamarans. Instead of a main sail the boats feature a rigid wing. These boats are capable of sailing 3 times the wind speed, with top speeds reaching 45 knots. The lecture describes the technological and human endeavor to develop and prepare the boat and the crew. Developing an America\\'s Cup boat is a multidisciplinary effort. Excellence is required in such different fields as aerodynamics, hydrodynamics, structural analysis, advanced composite engineering and building, design of mechanical control systems, hydraulics, electronics and flight control, to name the most important ones. Since automatic control systems (autopilots) are forbidden in the America\\'s Cup rules there is a strong two-way feedback between sailing practicalities and the technological choices being made. Combine this with the management of a very tight build schedule for hulls, beams, foils, rudders and the wing and you get an idea what it means to prepare for the America\\'s Cup.

77 FR 29359 - Sport Fishing and Boating Partnership Council

Science.gov (United States)

2012-05-17

...-FVWF979209000005D-XXX] Sport Fishing and Boating Partnership Council AGENCY: Fish and Wildlife Service, Interior... meeting of the Sport Fishing and Boating Partnership Council (Council). A Federal advisory committee, the... requirements of the Federal Advisory Committee Act, 5 U.S.C. App., we announce that the Sport Fishing and...

Convex Hull Abstraction in Specialisation of CLP Programs

DEFF Research Database (Denmark)

Peralta, J.C.; Gallagher, John Patrick

2003-01-01

We introduce an abstract domain consisting of atomic formulas constrained by linear arithmetic constraints (or convex hulls). This domain is used in an algorithm for specialization of constraint logic programs. The algorithm incorporates in a single phase both top-down goal directed propagation...... and bottom-up answer propagation, and uses a widening on the convex hull domain to ensure termination. We give examples to show the precision gained by this approach over other methods in the literature for specializing constraint logic programs. The specialization method can also be used for ordinary logic...

Does a Threshold Inflation Rate Exist? Quantile Inferences for Inflation and Its Variability

OpenAIRE

WenShwo Fang; Stephen M. Miller; Chih-Chuan Yeh

2009-01-01

Using quantile regressions and cross-sectional data from 152 countries, we examine the relationship between inflation and its variability. We consider two measures of inflation – the mean and median – and three different measures of inflation variability – the standard deviation, relative variation, and median deviation. All results from the mean and standard deviation, the mean and relative variation, or the median and the median deviation support both the hypothesis that higher inflation cr...

Flexibility Considerations on the Hydrodynamic Loading on a Vertical Wedge Drop

Science.gov (United States)

Ren, Zhongshu; Wang, Zhaoyuan; Judge, Carolyn; Stern, Fred; Ikeda, Christine

2017-11-01

High-speed craft operating at in waves frequently become airborne and slam into the water surface. This fluid-structure interaction problem is important to understand in order to increase the operating envelope of these craft. The goals of the current work are to investigate both the hydrodynamic loads and the resulting structural response on a planing hull. A V-shaped wedge is dropped vertically into calm water. The hydrodynamic pressure is measured using pressure sensors at discrete points on the hull. Two hulls are studied: one is rigid and one is flexible. Predictions of the hydrodynamic loading are made using Wagner's theory, Vorus's theory, and simulations in CFDShip Iowa. These predictions assume the structure is completely rigid. These predictions of the pressure coefficient match well with the rigid hull, as expected. The spray root is tracked in the rigid experimental set and compared with the theoretical and computational models. The pressure coefficient measured on the flexible hull shows discrepancies with the predictions due to the fluid-structure interaction. These discrepancies are quantified and interpreted in light of the structural flexibility. Funding for this work is from the Office of Naval Research Grant Number N00014-16-1-3188.

Nonminimally coupled hybrid inflation

International Nuclear Information System (INIS)

Koh, Seoktae; Minamitsuji, Masato

2011-01-01

We discuss the hybrid inflation model where the inflaton field is nonminimally coupled to gravity. In the Jordan frame, the potential contains φ 4 term as well as terms in the original hybrid inflation model. In our model, inflation can be classified into the type (I) and the type (II). In the type (I), inflation is terminated by the tachyonic instability of the waterfall field, while in the type (II) by the violation of slow-roll conditions. In our model, the reheating takes place only at the true minimum and even in the case (II) finally the tachyonic instability occurs after the termination of inflation. For a negative nonminimal coupling, inflation takes place in the vacuum-dominated region, in the large field region, or near the local minimum/maximum. Inflation in the vacuum-dominated region becomes either the type (I) or (II), resulting in a blue or red spectrum of the curvature perturbations, respectively. Inflation around the local maximum can be either the type (I) or the type (II), which results in the red spectrum of the curvature perturbations, while around the local minimum it must be the type (I), which results in the blue spectrum. In the large field region, to terminate inflation, potential in the Einstein frame must be positively tilted, always resulting in the red spectrum. We then numerically solve the equations of motion to investigate the whole dynamics of inflaton and confirm that the spectrum of curvature perturbations changes from red to blue ones as scales become smaller.

Characteristics of plutonium, curium and uranium in hulls of FUGEN MOX spent fuel by destructive analysis

International Nuclear Information System (INIS)

Iijima, Shizuka; Goto, Yuichi; Samoto, Hirotaka; Shichi, Ryo; Shimizu, Takenori

2011-01-01

We have been developing a non-destructive assay system called hulls monitor for nuclear fuel materials retained in hulls at the Tokai Reprocessing Plant (TRP). The hulls monitor is based on a passive neutron measurement method, so its applicability should be evaluated by a destructive analysis of hulls that are recovered from the reprocessing process. In this study, hulls came from the Advanced Thermal Reactor (ATR) FUGEN were taken from the dissolution process of TRP and destructively analyzed. Two kinds of hulls from ATR-MOX spent fuel assemblies and from ATR-UO 2 spent fuel assemblies were taken and soaked with nitric acid then fused with ammonium hydrogen sulfate, followed by Pu, 244 Cm, U mass determination by alpha spectrometry and ICP-AES. The characteristics of hulls came from MOX spent fuel assemblies were revealed by comparison of ATR-MOX spent fuel with ATR-UO 2 spent fuel. (author)

CRA Grade Inflation

OpenAIRE

Kenneth H. Thomas

2000-01-01

Community Reinvestment Act of 1977 (CRA) ratings and performance evaluations are the only bank and thrift exam findings disclosed by financial institution regulators. Inflation of CRA ratings has been alleged by community activists for two decades, but there has been no quantification or empirical investigation of grade inflation. Using a unique grade inflation methodology on actual ratings and evaluation data for 1,407 small banks and thrifts under the revised CRA regulations, this paper con...

Consolidation of cladding hulls from the electrometallurgical treatment of spent fuel

International Nuclear Information System (INIS)

Keiser, D.D. Jr.

1998-01-01

To consolidate metallic waste that is residual from Argonne National Laboratory's electrometallurgical treatment of spent nuclear fuel, waste ingots are currently being cast using an induction furnace located in a hot cell. These ingots, which have been developed to serve as final waste forms destined for repository disposal, are stainless steel (SS)-Zr alloys (the Zr is very near 15 wt.%). The charge for the alloys consists of stainless steel cladding hulls, Zr from the fuel being treated, noble metal fission products, and minor amounts of actinides that are present with the cladding hulls. The actual in-dated cladding hulls have been characterized before they were melted into ingots, and the final as-cast ingots have been characterized to determine the degree of consolidation of the charge material. It has been found that ingots can be effectively cast from irradiated cladding hulls residual from the electrometallurgical treatment process by employing an induction furnace located in a hot cell

Assessing inflation persistence: micro evidence on an inflation targeting economy

Czech Academy of Sciences Publication Activity Database

Babecký, Jan; Coricelli, F.; Horváth, R.

-, č. 353 (2008), s. 1-37 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z70850503 Keywords : inflation dynamics * persistence * inflation targeting Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp353.pdf

Preheating in new inflation

International Nuclear Information System (INIS)

Desroche, Mariel; Felder, Gary N.; Kratochvil, Jan M.; Linde, Andrei

2005-01-01

During the last ten years a detailed investigation of preheating was performed for chaotic inflation and for hybrid inflation. However, nonperturbative effects during reheating in the new inflation scenario remained practically unexplored. We investigate preheating in new inflation, using a combination of analytical and numerical methods. We find that the decay of the homogeneous component of the inflaton field and the resulting process of spontaneous symmetry breaking in the simplest models of new inflation usually occurs almost instantly: for the new inflation on the GUT scale it takes only about 5 oscillations of the field distribution. The decay of the homogeneous inflaton field is so efficient because of a combined effect of tachyonic preheating and parametric resonance. At that stage, the homogeneous oscillating inflaton field decays into a collection of waves of the inflaton field, with a typical wavelength of the order of the inverse inflaton mass. This stage usually is followed by a long stage of decay of the inflaton field into other particles, which can be described by the perturbative approach to reheating after inflation. The resulting reheating temperature typically is rather low

33 CFR Appendix G to Part 157 - Timetables for Application of Double Hull Requirements

Science.gov (United States)

2010-07-01

... Double Hull Requirements G Appendix G to Part 157 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Application of Double Hull Requirements 1. Source. These timetables conform to 46 U.S.C. 3703a(c). 2... double hull or with a double containment system determined by the Coast Guard to be as effective as a...

Yeast hulls: effect on spontaneous fermentation in different vinification conditions

Directory of Open Access Journals (Sweden)

Rosa López

2000-09-01

Full Text Available The effect of the addition of yeast hulls in vinification was investigated during three consecutive years. The study was carried out in the experimental winery of C.I.D.A in La Rioja (Spain with free running white grape juice of the Viura variety. Four different vinifications were studied. In two of these vinifications, stuck fermentations were detected. In all the studies, the addition of yeast hulls (yeast ghosts improved the fermentation kinetics, increasing the number of viable yeasts at the end of the exponential stage and decreasing the final content of reducing sugars. This work revealed a new effect of yeast hull addition which had not been identified previously; their selection effect on the wild yeast strain in spontaneous fermentation.

Inflation persistence and flexible prices

OpenAIRE

Robert Dittmar; William T. Gavin; Finn E. Kydland

2004-01-01

If the central bank follows an interest rate rule, then inflation is likely to be persistence, even when prices are fully flexible. Any shock, whether persistent or not, may lead to inflation persistence. In equilibrium, the dynamics of inflation are determined by the evolution of the spread between the real interest rate and the central bank’s target. Inflation persistence in U.S. data can be characterized by a vector autocorrelation function relating inflation and deviations of output from ...

Small-boat Cetacean Surveys Database

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The database contains multiple spreadsheets that hold data collected during each small-boat survey project conducted by the PIFSC CRP. This includes a summary of the...

Interest in the glenoid hull method for analyzing humeral subluxation in primary glenohumeral osteoarthritis.

Science.gov (United States)

Bouacida, Soufyane; Gauci, Marc-Olivier; Coulet, Bertrand; Lazerges, Cyril; Cyteval, Catherine; Boileau, Pascal; Chammas, Michel

2017-07-01

Posterior humeral subluxation is the main cause of failure of total shoulder arthroplasty. We aimed to compare humeral head subluxation in various reference planes and to search for a correlation with retroversion, inclination, and glenoid wear. We included 109 computed tomography scans of primary glenohumeral osteoarthritis and 97 of shoulder problems unrelated to shoulder osteoarthritis (controls); all computed tomography scans were reconstructed in the anatomic scapular plane and the glenoid hull plane that we defined. In both planes, we measured retroversion, inclination, glenohumeral offset (Walch index), and scapulohumeral offset. Retroversion in the scapular plane (Friedman method) was lower than that in the glenoid hull plane for controls and for arthritic shoulders. The threshold of scapulohumeral subluxation was 60% and 65% in the scapular plane and glenoid hull plane, respectively. The mean upward inclination was lower in the scapular plane (Churchill method) than in the glenoid hull plane (Maurer method). In the glenoid hull plane, 35% of type A2 glenoids showed glenohumeral offset greater than 75%, with mean retroversion of 25.6° ± 6° as compared with 7.5° ± 7.2° for the "centered" type A2 glenoids (P hull plane and r = 0.59 in the scapular plane (P hull plane may be more accurate than in the scapular plane. Thus, the glenoid hull method allows for better understanding type B3 of the modified Walch classification. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Flooding and schools: experiences in Hull in 2007.

Science.gov (United States)

Convery, Ian; Carroll, Bob; Balogh, Ruth

2015-01-01

Hull, a city in the East Riding of Yorkshire, United Kingdom, suffered severe flooding in June 2007, affecting some 8,600 households and most schools. Despite the potential for damage in such disasters, no studies of the effects of floods on teachers and schools in the UK appear to have been published previously. This study analysed the impacts of the floods on teachers in Hull in two stages: first through correspondence with Hull City Council and a mailed questionnaire to 91 head teachers of primary, secondary, and special schools; and second, through in-depth interviews with head teachers from six flooded schools, representing different degrees of flood experience, and a questionnaire completed by eight teachers from the same schools. The findings reveal the importance and the complexity of the role of the school in the wider community in a time of crisis. The study highlights issues concerning preparedness for floods, support for schools, and flood protection for schools. © 2014 The Author(s). Disasters © Overseas Development Institute, 2014.

Modulus D-term inflation

Science.gov (United States)

Kadota, Kenji; Kobayashi, Tatsuo; Saga, Ikumi; Sumita, Keigo

2018-04-01

We propose a new model of single-field D-term inflation in supergravity, where the inflation is driven by a single modulus field which transforms non-linearly under the U(1) gauge symmetry. One of the notable features of our modulus D-term inflation scenario is that the global U(1) remains unbroken in the vacuum and hence our model is not plagued by the cosmic string problem which can exclude most of the conventional D-term inflation models proposed so far due to the CMB observations.

Boat sampling technique for assessment of ageing of components

International Nuclear Information System (INIS)

Kumar, Kundan; Shyam, T.V.; Kayal, J.N.; Rupani, B.B.

2006-01-01

Boat sampling technique (BST) is a surface sampling technique, which has been developed for obtaining, in-situ, metal samples from the surface of an operating component without affecting its operating service life. The BST is non-destructive in nature and the sample is obtained without plastic deformation or without thermal degradation of the parent material. The shape and size of the sample depends upon the shape of the cutter and the surface geometry of the parent material. Miniature test specimens are generated from the sample and the specimens are subjected to various tests, viz. Metallurgical Evaluation, Metallographic Evaluation, Micro-hardness Evaluation, sensitisation test, small punch test etc. to confirm the integrity and assessment of safe operating life of the component. This paper highlights design objective of boat sampling technique, description of sampling module, sampling cutter and its performance evaluation, cutting process, boat samples, operational sequence of sampling module, qualification of sampling module, qualification of sampling technique, qualification of scooped region of the parent material, sample retrieval system, inspection, testing and examination to be carried out on the boat samples and scooped region. (author)

Racetrack inflation and cosmic strings

Energy Technology Data Exchange (ETDEWEB)

Brax, P. [CEA-Saclay, Gif sur Yvette (France). CEA/DSM/SPhT, Unite de Recherche Associee au CNRS, Service de Physique Theorique; Bruck, C. van de [Sheffield Univ. (United Kingdom). Dept. of Applied Mathematics; Davis, A.C.; Davis, S.C. [Cambridge Univ. (United Kingdom). DAMTP, Centre for Mathematical Sciences; Jeannerot, R. [Instituut-Lorentz for Theoretical Physics, Leiden (Netherlands); Postma, M. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Nationaal Inst. voor Kernfysica en Hoge-Energiefysica (NIKHEF), Amsterdam (Netherlands)

2008-05-15

We consider the coupling of racetrack inflation to matter fields as realised in the D3/D7 brane system. In particular, we investigate the possibility of cosmic string formation in this system. We find that string formation before or at the onset of racetrack inflation is possible, but they are then inflated away. Furthermore, string formation at the end of inflation is prevented by the presence of the moduli sector. As a consequence, no strings survive racetrack inflation. (orig.)

Racetrack inflation and cosmic strings

International Nuclear Information System (INIS)

Brax, P.; Postma, M.

2008-05-01

We consider the coupling of racetrack inflation to matter fields as realised in the D3/D7 brane system. In particular, we investigate the possibility of cosmic string formation in this system. We find that string formation before or at the onset of racetrack inflation is possible, but they are then inflated away. Furthermore, string formation at the end of inflation is prevented by the presence of the moduli sector. As a consequence, no strings survive racetrack inflation. (orig.)

Kähler-driven tribrid inflation

Science.gov (United States)

Antusch, Stefan; Nolde, David

2012-11-01

We discuss a new class of tribrid inflation models in supergravity, where the shape of the inflaton potential is dominated by effects from the Kähler potential. Tribrid inflation is a variant of hybrid inflation which is particularly suited for connecting inflation with particle physics, since the inflaton can be a D-flat combination of charged fields from the matter sector. In models of tribrid inflation studied so far, the inflaton potential was dominated by either loop corrections or by mixing effects with the waterfall field (as in "pseudosmooth" tribrid inflation). Here we investigate the third possibility, namely that tribrid inflation is dominantly driven by effects from higher-dimensional operators of the Kähler potential. We specify for which superpotential parameters the new regime is realized and show how it can be experimentally distinguished from the other two (loop-driven and "pseudosmooth") regimes.

Characterization of whole assembly hulls produced by industrial reprocessing of LWR fuels

International Nuclear Information System (INIS)

Gue, J.P.; Isaac, M.

1987-03-01

The characterization program for Obrigheim and Stade PWR hulls sampled at La Hague was conducted in the CEA hot cells (Coquenstock program operating on whole assembly hulls). A description of the appearance of these hulls, recovered on the industrial scale and after severe damage, is followed by a review of the results of the different radiochemical characterization operations (neutron emission measurements, gamma scanning, alpha and mass spectrometry after dissolution of several samples, determination of the retention of tritium and other gaseous fission products occluded in the zircalloy clads etc). The alpha contamination of these hulls proved to be rather high, but it demonstrated that a large part (90 to 95%) was labile and could be removed by simple rinsing with cold 3N nitric acid. By contrast, contamination by fission products such as Cs 137, Ce 144 and Eu 154, remains high and relatively unaffected by nitriacid rinsing. Based on the results obtained and the observations recorded, an analysis is carried out of the origins of alpha contamination of these hulls treated on an industrial scale, among which the chief source is certainly the limited effectiveness of rinsing

Characterization of whole assembly hulls produced by industrial reprocessing of LWR fuels

International Nuclear Information System (INIS)

Gue, J.P.; Isaac, M.; Hebel, W.

1987-01-01

The characterization program for Obrigheim and Stade PWR hulls sampled at La Hague was conducted in the CEA hot cells (Coquenstock program operating on whole assembly hulls). A description of the appearance of these hulls, recovered on the industrial scale and after severe damage, is followed by a review of the results of the different radiochemical characterization operations (neutron emission measurements, gamma scanning, alpha and mass spectrometry after dissolution of several samples, determination of the retention of tritium and other gaseous fission products occluded in the zircalloy clads, etc.). The alpha contamination of these hulls proved to be rather high, but it demonstrated that a large part (90 to 95%) was labile and could be removed by simple rinsing with cold 3N nitric acid. By contrast, contamination by fission products such as Cs 137, Ce 144 and Eu 154, remains high and relatively unaffected by nitric acid rinsing. Based on the results obtained and the observations recorded, an analysis is carried out of the origins of alpha contamination of these hulls treated on an industrial scale, among which the chief source is certainly the limited effectiveness of rinsing

Entry Descent and Landing Workshop Proceedings. Volume 1; Inflatable Reentry Vehicle Experiment-3 (IRVE-3) Project Overview & Instrumentation

Science.gov (United States)

Dillman, Robert

2015-01-01

Entry mass at Mars is limited by the payload size that can be carried by a rigid capsule that can fit inside the launch vehicle fairing. Landing altitude at Mars is limited by ballistic coefficient (mass per area) of entry body. Inflatable technologies allow payload to use full diameter of launch fairing, and deploy larger aeroshell before atmospheric interface, landing more payload at a higher altitude. Also useful for return of large payloads from Low Earth Orbit (LEO).

Inflation with Fayet-Iliopoulos terms

International Nuclear Information System (INIS)

Wieck, Clemens; Winkler, Martin Wolfgang

2014-08-01

Two of the most attractive realizations of inflation in supergravity are based upon the presence of a constant Fayet-Iliopoulos (FI) term. In D-term hybrid inflation it is the FI term itself which sets the energy scale of inflation. Alternatively, the breaking of a U(1) symmetry induced by the FI term can dynamically generate the quadratic potential of chaotic inflation. The purpose of this note is to study the possible UV embedding of these schemes in terms of the 'field-dependent FI term' related to a string modulus field which is stabilized by a non-perturbative superpotential. We find that in settings where the FI term drives inflation, gauge invariance prevents a decoupling of the modulus from the inflationary dynamics. The resulting inflation models generically contain additional dynamical degrees of freedom compared to D-term hybrid inflation. However, the dynamical realization of chaotic inflation can be obtained in complete analogy to the case of a constant FI term. We present a simple string-inspired toy model of this type.

Double hull oil tankers - how effective are they?

International Nuclear Information System (INIS)

Keith, V.F.

1993-01-01

The groundings of the Exxon Valdez on Bligh Reef in Prince William Sound, spilling more than 10 million gallons of Alaska North Slope crude, and the American Trader off Huntington Beach, spilling almost 400,000 gallons of Alaska North Slope crude, suggest that the construction of oil tankers be re-examined with respect to a design which could reduce both the number and magnitude of oil spills. This paper discusses state-of-the-art tanker technology with respect to spill prevention, effectiveness, and cost. The design features include double hulls, centralized bunker tankers, vacuum-retaining valves, cargo control systems, auxiliary thrusters, electronic charting, and the retransmission of the ship's position. Double hulls provide the highest probability of surviving damage, either from a collision or grounding, with no loss of cargo. Use of double hulls can reduce oil spill incidence by 90 percent in grounding situations and by 75 percent in collisions. The oil spill from the AmericanTrader could have been completely avoided by double hull construction. The arrangement provides spaces below the cargo tanks and on the vessel's sides solely for the carriage of ballast water when the tanker is in ballast condition. These tanks are empty when the tanker is loaded and then also act as the first line of defense in the event of structural damage to the cargo tanks. Tanker design is integrated with port safety measures, including vessel monitoring systems, in this total spill prevention analysis. All aspects of the tanker transportation system are considered

Anisotropic inflation from charged scalar fields

International Nuclear Information System (INIS)

Emami, Razieh; Firouzjahi, Hassan; Movahed, S.M. Sadegh; Zarei, Moslem

2011-01-01

We consider models of inflation with U(1) gauge fields and charged scalar fields including symmetry breaking potential, chaotic inflation and hybrid inflation. We show that there exist attractor solutions where the anisotropies produced during inflation becomes comparable to the slow-roll parameters. In the models where the inflaton field is a charged scalar field the gauge field becomes highly oscillatory at the end of inflation ending inflation quickly. Furthermore, in charged hybrid inflation the onset of waterfall phase transition at the end of inflation is affected significantly by the evolution of the background gauge field. Rapid oscillations of the gauge field and its coupling to inflaton can have interesting effects on preheating and non-Gaussianities

78 FR 57063 - Special Local Regulations; Jacksonville Dragon Boat Festival; St. Johns River; Jacksonville, FL

Science.gov (United States)

2013-09-17

... 1625-AA08 Special Local Regulations; Jacksonville Dragon Boat Festival; St. Johns River; Jacksonville... Jacksonville Dragon Boat Festival, a series of paddle boat races. The event is scheduled to take place on... States during the Jacksonville Dragon Boat Festival. C. Discussion of the Final Rule On Saturday...

Rudder Based Roll Control via host-computer of A Robotic Boat

OpenAIRE

Bao, Xinping; Yu, Zhenyu; Nonami, Kenzo

2009-01-01

Rudder based roll control of a small-sized robotic boat is a key technique for the devices on board to achieve good performance. This paper introduces a host-based robotic boat capable of performing basic movement operations. The course keeping and roll reduction are studied via rudder based method in simulations and sea trials. The boat dynamic model is built with the combination of mathematical analysis and system identification technique. A mixed sensitivity H control method design is sele...

No-scale inflation

Science.gov (United States)

Ellis, John; Garcia, Marcos A. G.; Nanopoulos, Dimitri V.; Olive, Keith A.

2016-05-01

Supersymmetry is the most natural framework for physics above the TeV scale, and the corresponding framework for early-Universe cosmology, including inflation, is supergravity. No-scale supergravity emerges from generic string compactifications and yields a non-negative potential, and is therefore a plausible framework for constructing models of inflation. No-scale inflation yields naturally predictions similar to those of the Starobinsky model based on R+{R}2 gravity, with a tilted spectrum of scalar perturbations: {n}s∼ 0.96, and small values of the tensor-to-scalar perturbation ratio r\\lt 0.1, as favoured by Planck and other data on the cosmic microwave background (CMB). Detailed measurements of the CMB may provide insights into the embedding of inflation within string theory as well as its links to collider physics.

No-Scale Inflation

CERN Document Server

Ellis, John; Nanopoulos, Dimitri V.; Olive, Keith A.

2016-01-01

Supersymmetry is the most natural framework for physics above the TeV scale, and the corresponding framework for early-Universe cosmology, including inflation, is supergravity. No-scale supergravity emerges from generic string compactifications and yields a non-negative potential, and is therefore a plausible framework for constructing models of inflation. No-scale inflation yields naturally predictions similar to those of the Starobinsky model based on $R + R^2$ gravity, with a tilted spectrum of scalar perturbations: $n_s \\sim 0.96$, and small values of the tensor-to-scalar perturbation ratio $r < 0.1$, as favoured by Planck and other data on the cosmic microwave background (CMB). Detailed measurements of the CMB may provide insights into the embedding of inflation within string theory as well as its links to collider physics.

Hull's Diploma in Teaching of Adults

Science.gov (United States)

Styler, W. E.

1971-01-01

A diploma in the Teaching of Adults for part-time students was introduced in the University of Hull in 1966 as a fully recognized university diploma. Article discusses the three major parts of the course, examinations, and requirements. (RB)

Guam Boat-based Creel Survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Similar to other boat-based survey in basic design, this system is run by the Div. of Aquatic and Wildlife Resources (DAWR) and has been in operation since about...

Drag Reduction trough Special paints Coated on the hull

OpenAIRE

Izaguirre Alza, Patricia; Pérez Rojas, Luis; Núñez Basáñez, José Fernando

2010-01-01

The economic recession, the environmental impact as well as the continuous fossil fuel consumption encourage actions that focus on saving energy. In the vessels sector, one of the main objectives has always been to reach a hydro-dynamically optimum hull which gave the desired speed with minimum power. Hydrodynamic drag is basically divided into two parts: a) the friction between the water and the hull, and b) the wave generation due to the free-surface air-water. Presented in this paper...

The technology applying of inflatable devices to access adaptation, movement and landing descent vehicle from Martian environment to the Earth conditions

Science.gov (United States)

Koryanov, Vsevolod V.; Kazakovtsev, Victor P.

2017-07-01

At present, the idea has emerged to use special inflatable braking device (IBD) which permits to implement the landing vehicle (LV) "soft" landing on the planet's surface without a parachute system. Braking device (BD) unfolds still at the extra-atmospheric flight stage to provide the LV passive stabilisation, and the entire apparatus together with the braking device is twisted around its longitudinal axis. The advantage of an inflatable BD over traditional non-rigid brakes - parachutes is that it can be used at the atmospheric stage of the descent, starting from hypersonic speeds, and ending subsonic ones. These main theses are implemented in the project MetNet and its sequel project RITD, using Entry, Descent and Landing System (EDLS) system [1].

Ecological boat using the renewable energies

International Nuclear Information System (INIS)

Cazacu, Mircea Dimitrie; Mihaiescu, Gheorghe Mihai; Nicolaie, Sergiu

2007-01-01

One presents an ecological boat, proper to biosphere reservation Danube Delta in Romania, using the solar energy cached by the photovoltaic cells for the propulsion, as well as the river kinetic energy for the additional loading of the electric storage batteries. One gives details concerning the original design method for the screw, to realize the maximum propulsion force, as well as its location place in the view of the rudder elimination. At the same time, one presents the design and realization of the hydro-power unit, constituted by an axial hydro turbine, direct coupled with a submersed electric generator endowed with permanent magnets, for the supplementary loading of the electric storage batteries while the boat is anchored. (authors)

Development and application of α-hull and Voronoi diagrams in the assessment of roundness error

International Nuclear Information System (INIS)

Li, Xiuming; Liu, Hongqi; Li, Wei

2011-01-01

Computational geometry has been used to select effective data points from the measured data points for evaluating the roundness error to improve the computational complexity. However, for precision parts most of the measured points are on the vertices of the convex hull; it cannot have any effect on improving the computational complexity with the Voronoi diagrams. In this paper the roundness error is evaluated with α-hull and the Voronoi diagram instead of convex hull. An approach for constructing α-hull with the minimum radius separation is presented to determine the vertices of the Voronoi diagram. The experimental results showed that the roundness error of the minimum zone circle could be solved efficiently with α-hull and the Voronoi diagram

Finite element analysis of an inflatable torus considering air mass structural element

Science.gov (United States)

Gajbhiye, S. C.; Upadhyay, S. H.; Harsha, S. P.

2014-01-01

Inflatable structures, also known as gossamer structures, are at high boom in the current space technology due to their low mass and compact size comparing to the traditional spacecraft designing. Internal pressure becomes the major source of strength and rigidity, essentially stiffen the structure. However, inflatable space based membrane structure are at high risk to the vibration disturbance due to their low structural stiffness and material damping. Hence, the vibration modes of the structure should be known to a high degree of accuracy in order to provide better control authority. In the past, most of the studies conducted on the vibration analysis of gossamer structures used inaccurate or approximate theories in modeling the internal pressure. The toroidal shaped structure is one of the important key element in space application, helps to support the reflector in space application. This paper discusses the finite-element analysis of an inflated torus. The eigen-frequencies are obtained via three-dimensional small-strain elasticity theory, based on extremum energy principle. The two finite-element model (model-1 and model-2) have cases have been generated using a commercial finite-element package. The structure model-1 with shell element and model-2 with the combination of the mass of enclosed fluid (air) added to the shell elements have been taken for the study. The model-1 is computed with present analytical approach to understand the convergence rate and the accuracy. The convergence study is made available for the symmetric modes and anti-symmetric modes about the centroidal-axis plane, meeting the eigen-frequencies of an inflatable torus with the circular cross section. The structural model-2 is introduced with air mass element and analyzed its eigen-frequency with different aspect ratio and mode shape response using in-plane and out-plane loading condition are studied.

Assessment of a Boat Fractured Steering Wheel

Directory of Open Access Journals (Sweden)

Vukelic Goran

2016-09-01

Full Text Available During regular use of the steering wheel mounted on a boat, two cracks emanating from a fastener hole were noticed which, consequently, caused final fracture of the wheel. To determine the behavior of a boat steering wheel with cracks present, assessment of a fractured wheel was performed. Torque moments of the fasteners were measured prior to removing the steering wheel from the boat. Visual and dye penetrant inspection followed along with the material detection. Besides using experimental procedures, assessment of the fractured wheel was performed using finite element analysis, i.e. stress intensity factor values were numerically determined. Variation of stress intensity factor with crack length is presented. Possible causes of crack occurrence are given and they include excessive values of fastener torque moments coupled with fretting between fastener and fastener hole that was poorly machined. Results obtained by this assessment can be taken for predicting fracture behavior of a cracked steering wheel and as a reference in the design, mounting and exploitation process of steering wheels improving that way their safety in transportation environment.

19 CFR 148.32 - Vehicles, aircraft, boats, teams and saddle horses taken abroad.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Vehicles, aircraft, boats, teams and saddle horses... for Returning Residents § 148.32 Vehicles, aircraft, boats, teams and saddle horses taken abroad. (a) Admission free of duty. Automobiles and other vehicles, aircraft, boats, teams and saddle horses, together...

The role of Bh4 in parallel evolution of hull colour in domesticated and weedy rice.

Science.gov (United States)

Vigueira, C C; Li, W; Olsen, K M

2013-08-01

The two independent domestication events in the genus Oryza that led to African and Asian rice offer an extremely useful system for studying the genetic basis of parallel evolution. This system is also characterized by parallel de-domestication events, with two genetically distinct weedy rice biotypes in the US derived from the Asian domesticate. One important trait that has been altered by rice domestication and de-domestication is hull colour. The wild progenitors of the two cultivated rice species have predominantly black-coloured hulls, as does one of the two U.S. weed biotypes; both cultivated species and one of the US weedy biotypes are characterized by straw-coloured hulls. Using Black hull 4 (Bh4) as a hull colour candidate gene, we examined DNA sequence variation at this locus to study the parallel evolution of hull colour variation in the domesticated and weedy rice system. We find that independent Bh4-coding mutations have arisen in African and Asian rice that are correlated with the straw hull phenotype, suggesting that the same gene is responsible for parallel trait evolution. For the U.S. weeds, Bh4 haplotype sequences support current hypotheses on the phylogenetic relationship between the two biotypes and domesticated Asian rice; straw hull weeds are most similar to indica crops, and black hull weeds are most similar to aus crops. Tests for selection indicate that Asian crops and straw hull weeds deviate from neutrality at this gene, suggesting possible selection on Bh4 during both rice domestication and de-domestication. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

Fabrication of renewable biocomposites from soy hull and bioplastics

Science.gov (United States)

Nanda, Malaya Ranjan

This is an investigation for fabrication of biocomposites from soy hull and bioplastics like polylactide (PLA) and polyhydroxy butyrate-co- valerate (PHBV). The study was divided into three parts; the first was the development of a suitable PHBV/PLA blend. The second part involved the fabrication of composites from soy hull and PHBV/PLA blend and its comparison with polypropylene (PP)/soy hull composites. The third part was the effect of compatibilizer on the performance of the composites. From tensile study, the elongation of an optimized blend was found to be improved by 148 and 250% over the virgin polymers PHBV and PLA respectively. Scanning electron microscope revealed a stronger fiber-matrix interaction in PHBV/PLA composites over PP composites. Furthermore, the compatibilizer improved the impact and flexural strength by 56 and 32% respectively over the un-compatibilized counterpart; more significantly the resulting compatibilized composites showed improved hydrophobicity by more than 22% over un-compatibilized counterpart.

Gamma radiation effects on phenolics, antioxidants activity and in vitro digestion of pistachio (Pistachia vera) hull

Energy Technology Data Exchange (ETDEWEB)

Behgar, M [Agricultural, Medical and Industrial Research School, P.O. Box 31485498, Karaj (Iran, Islamic Republic of); Ghasemi, S; Naserian, A [Faculty of Agriculture, Excellence Center in Animal Science, Ferdowsi University of Mashhad, P.O. Box 917751163, Mashhad (Iran, Islamic Republic of); Borzoie, A; Fatollahi, H [Agricultural, Medical and Industrial Research School, P.O. Box 31485498, Karaj (Iran, Islamic Republic of)

2011-09-15

The effect of gamma radiation (10, 20, 30, 40, 50 and 60 kGy) on tannin, total phenolics, antioxidants activity and in vitro digestion of pistachio hulls has been investigated in this study. The possibility of using the radial diffusion method based on software measurement of the rings area has also been investigated in this study. The software based method in radial diffusion method showed a higher r{sup 2} (0.995) value when compared to the traditional method. Irradiation reduced the tannin content (P<0.01) and activity of antioxidants (P<0.05) of pistachio hull extracts but increased the total phenolic content (P<0.05). There was no effect of gamma irradiation on the in vitro digestion of the pistachio hull. Irradiation decreased the digestion rate of the pistachio hull at the dose of 40 kGy when compared to the control. This study showed that gamma irradiation decreased tannin and antioxidants activity of pistachio hull. - Highlights: > we investigate the effects of gamma irradiation on pistachio hull. > We examine changes in phenolics, antioxidant and digestion of pistachio hull. > Computerized radial diffusion method gives precise regression for standard curve. > Gamma irradiation will decrease tannin and antioxidants of pistachio hull extracts.

Gamma radiation effects on phenolics, antioxidants activity and in vitro digestion of pistachio (Pistachia vera) hull

International Nuclear Information System (INIS)

Behgar, M.; Ghasemi, S.; Naserian, A.; Borzoie, A.; Fatollahi, H.

2011-01-01

The effect of gamma radiation (10, 20, 30, 40, 50 and 60 kGy) on tannin, total phenolics, antioxidants activity and in vitro digestion of pistachio hulls has been investigated in this study. The possibility of using the radial diffusion method based on software measurement of the rings area has also been investigated in this study. The software based method in radial diffusion method showed a higher r 2 (0.995) value when compared to the traditional method. Irradiation reduced the tannin content (P<0.01) and activity of antioxidants (P<0.05) of pistachio hull extracts but increased the total phenolic content (P<0.05). There was no effect of gamma irradiation on the in vitro digestion of the pistachio hull. Irradiation decreased the digestion rate of the pistachio hull at the dose of 40 kGy when compared to the control. This study showed that gamma irradiation decreased tannin and antioxidants activity of pistachio hull. - Highlights: → we investigate the effects of gamma irradiation on pistachio hull. → We examine changes in phenolics, antioxidant and digestion of pistachio hull. → Computerized radial diffusion method gives precise regression for standard curve. → Gamma irradiation will decrease tannin and antioxidants of pistachio hull extracts.

Extended inflation with induced gravity

International Nuclear Information System (INIS)

Accetta, F.S.; Trester, J.J.; Department of Physics, Yale University, New Haven, Connecticut 06520)

1989-01-01

We consider a recently proposed extended model of inflation which improves upon the original old inflation scenario by achieving a graceful exit from the false-vacuum phase. In this paper extended inflation is generalized to include a potential V(phi) for the Brans-Dicke-type field phi. We find that whereas a graceful exit can still be had, the inclusion of a potential places constraints on the percolation time scale for exiting the inflationary phase. Additional constraints on V(phi) and the false-vacuum energy density rho /sub F/ from density and gravitational-wave perturbations are discussed. For initially small values of phi the false vacuum undergoes power-law inflation, while for initially large values of phi the expansion is exponential. Within true-vacuum regions slow-rolling inflation can occur. As a result, this model generically leads to multiple episodes of inflation. We discuss the significance these multiple episodes of inflation may have on the formation of large-scale structure and the production of voids

Inflation Rate Modelling in Indonesia

Directory of Open Access Journals (Sweden)

Rezzy Eko Caraka

2016-10-01

Full Text Available The purposes of this research were to analyse: (i Modelling the inflation rate in Indonesia with parametric regression. (ii Modelling the inflation rate in Indonesia using non-parametric regression spline multivariable (iii Determining the best model the inflation rate in Indonesia (iv Explaining the relationship inflation model parametric and non-parametric regression spline multivariable. Based on the analysis using the two methods mentioned the coefficient of determination (R2 in parametric regression of 65.1% while non-parametric amounted to 99.39%. To begin with, the factor of money supply or money stock, crude oil prices and the rupiah exchange rate against the dollar is significant on the rate of inflation. The stability of inflation is essential to support sustainable economic development and improve people's welfare. In conclusion, unstable inflation will complicate business planning business activities, both in production and investment activities as well as in the pricing of goods and services produced.DOI: 10.15408/etk.v15i2.3260

Quantum fluctuations and inflation

International Nuclear Information System (INIS)

Bardeen, J.M.; Bublik, G.J.

1986-05-01

We study the effect of quantum fluctuations on the roll-down rate of the inflation field in a semiclassical approximation; this is done by treating the inflation field as a classical random field. The quantum fluctuations are simulated by a noise term in the equation of motion. We consider two different inflationary scenarios (new and chaotic inflation) and find that the roll-down rate of the median value of the inflation field is increased by the quantum fluctuations. Non-linear effects may become important in the later stages of the inflationary regime. 8 refs., 2 figs

Quantum fluctuations and inflation

International Nuclear Information System (INIS)

Bardeen, J.M.; Bublik, G.J.

1987-01-01

The authors study the effect of quantum fluctuations on the roll-down rate of the inflation field in a semiclassical approximation; this is done by treating the inflation field as a classical random field. The quantum fluctuations are simulated by a noise term in the equation of motion. Two different inflationary scenarios (new and chaotic inflation) are considered and it is found that the roll-down rate of the median value of the inflation field is increased by the quantum fluctuations. Non-linear effects may become important in the later stages of the inflationary regime. (author)

Power Product Equipment Technician: Outboard-Engine Boat Systems. Teacher Edition [and] Student Edition.

Science.gov (United States)

Hilley, Robert

This curriculum guide contains teacher and student materials for a course on outboard-engine boat systems for power product equipment technician occupations. The course contains the following three units of instruction: (1) Orientation to Outboard-Engine Boat Systems and Rigging; (2) Trailers and Safe Towing and Boat Operation; and (3) Seasonal…

Core inflation indicators for Saudi Arabia

Directory of Open Access Journals (Sweden)

Alkhareif Ryadh M.

2015-01-01

Full Text Available This paper constructs and analyzes core inflation indicators for Saudi Arabia for the period of March 2012 to May 2014 using two alternative approaches: the exclusion method (ex food and housing/rent and the statistical method. The findings of the analysis suggest that the ex food and housing/ rent inflation is more volatile than the overall CPI inflation over the sample period. In contrast, the statistical core inflation is relatively more stable and less volatile. Moreover, the ex food and housing/rent inflation is only weakly correlated with headline inflation, whereas the statistical core inflation exhibits a stronger correlation. This combination of lower volatility and higher correlation with headline inflation makes the statistical method a much better choice for policymakers. From a monetary policy standpoint, using a bundle of core inflation measures, including both properly constructed exclusion and statistical methods, is more desirable, especially when variation across measures is widespread, as is the case in Saudi Arabia.

78 FR 50335 - Double Hull Tanker Escorts on the Waters of Prince William Sound, Alaska

Science.gov (United States)

2013-08-19

...-AB96 Double Hull Tanker Escorts on the Waters of Prince William Sound, Alaska AGENCY: Coast Guard, DHS... mandates two tug escorts for double hull tankers over 5,000 gross tons transporting oil in bulk in PWS. The... tug escort requirements apply to certain double hull tankers. DATES: This interim rule is effective...

What Drives China's Food-Price Inflation and How does It Affect the Aggregate Inflation?

OpenAIRE

Wenlang Zhang; Daniel Law

2010-01-01

It is typically argued that China's food-price inflation has been mainly driven by supply-side shocks including natural disasters. Our research, however, shows that demand pressures have played a more important role from a medium-term perspective. This suggests surging food prices may call for policy reactions even if non-food-price inflation is tame. Meanwhile, we find food-price inflation has not generated significant second-round effects on non-food-price inflation. In particular, while fo...

Effect of rice hull mulch on nutrient concentration of fertilized irrigation water

Science.gov (United States)

Parboiled rice hulls are an effective mulch for controlling weeds in nursery containers. A layer of rice hulls between 1.25 and 2.5 cm deep has been shown to provide effective control of liverwort (Marchantia polymorpha), bittercress (Cardamine flexuosa), and creeping woodsorrel (Oxalis corniculata...

THE ACTUAL IMPLICATIONS OF INFLATION

Directory of Open Access Journals (Sweden)

Murăriţa Ilie

2011-12-01

Full Text Available The authors have started from the idea that inflationary phenomenon is a companion, the cause and the effect of the globalization of poverty in the broader context of world economy globalization. Therefore, starting from a common definition of inflation, the first objective was to identify causal relationships that singularize contemporary inflationary process. After that, attention was focused on the implications of inflation in the current stage, bearing in mind that monetary financial theory and practice are operating with perfectly anticipated inflation or imperfectly anticipated inflation. Inflation has great implications on the long-term contracts and wage contracts.

Alchemical inflation: inflaton turns into Higgs

Science.gov (United States)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-11-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field.

Alchemical inflation: inflaton turns into Higgs

International Nuclear Information System (INIS)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-01-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field

Effects of feeding hulled and hull-less barley with low- and high-forage diets on lactation performance, nutrient digestibility, and milk fatty acid composition of lactating dairy cows.

Science.gov (United States)

Yang, Y; Ferreira, G; Teets, C L; Corl, B A; Thomason, W E; Griffey, C A

2018-04-01

The objective of this study was to evaluate lactation performance, nutrient digestibility, and milk fatty acid composition of high-producing dairy cows consuming diets containing hulled or hull-less barley as the grain source when feeding low-forage (LF) or high-forage (HF) diets. Eight primiparous (610 ± 40 kg of body weight and 72 ± 14 d in milk) and 16 multiparous (650 ± 58 kg of body weight and 58 ± 16 d in milk) Holstein cows were randomly assigned to 1 of 4 diets in a replicated 4 × 4 Latin square design with a 2 × 2 factorial arrangement of treatments and 21-d periods. Cows were assigned to squares based on parity (1, 2, and ≥3) and days in milk. Diets were formulated to contain on a dry matter basis (1) 45% forage and hulled barley as the sole grain source, (2) 65% forage and hulled barley as the sole grain source, (3) 45% forage and hull-less barley as the sole grain source, and (4) 65% forage and hull-less barley as the sole grain source. Dry matter intake tended to be lower for the diet with 65% forage and hulled barley than for the rest of the diets (24.4 vs. 26.6 kg/d). Neither the type of barley nor the forage-to-concentrate ratio affected milk yield (41.7 kg/d). Barley type did not affect milk fat or protein concentrations. Feeding LF diets decreased milk fat concentration from 3.91% to 3.50%. This decrease was less than anticipated and resulted in a 7% decrease in milk fat yield relative to cows consuming HF diets (1.60 and 1.49 kg/d for HF and LF diets, respectively). Feeding LF diets increased the concentration of C18:1 trans-10 in milk fat, suggesting that feeding LF diets may have marginally altered rumen function. In conclusion, LF diets containing barley grains can marginally decrease milk fat concentration. Overall, and based on the conditions of this study, there is limited evidence to anticipate a dramatic or acute milk fat depression when feeding hull-less barley as the grain source in diets for high-producing dairy cows. Copyright

Deployment of Lightweight Shock Mitigating Boat Manufacturing Innovation

Science.gov (United States)

2012-12-21

hull and deck of the 11M prototype with the forward hatches temporally secured. Lift hardware was installed. The craft was loaded per the figure...35.9262 25.8100- 25.8100 36.0443 34.3043 l- EAD Wf.IG G (Pi’-\\ A r IMJ<HEAO WING E (P) r !MJ<HEAOWING O(P) ul lll ld II lll rnr Il l II I llll Il l...ii ~ "’ 57 11M- Hull Drawings – Fiberglass Design / ?--/ - ~ L 10 1&116" ______..j_j DETAIL B-50 BU~ EAD WING A OET AIL C-50 BULKHEAD

Heterogeneous inflation expectations and learning

OpenAIRE

Madeira, Carlos; Zafar, Basit

2012-01-01

Using the panel component of the Michigan Survey of Consumers, we estimate a learning model of inflation expectations, allowing for heterogeneous use of both private information and lifetime inflation experience. “Life-experience inflation” has a significant impact on individual expectations, but only for one-year-ahead inflation. Public information is substantially more relevant for longer-horizon expectations. Even controlling for life-experience inflation and public information, idiosyncra...

Onboard monitoring of fatigue damage rates in the hull girder

DEFF Research Database (Denmark)

Nielsen, Ulrik Dam; Jensen, Jørgen Juncher; Pedersen, Preben Terndrup

2011-01-01

Most new advanced ships have extensive data collection systems to be used for continuous monitoring of engine and hull performance, for voyage performance evaluation etc. Such systems could be expanded to include also procedures for stress monitoring and for decision support, where the most...... critical wave-induced ship extreme responses and fatigue damage accumulation can be estimated for hypothetical changes in ship course and speed in the automatically estimated wave environment.The aim of this paper is to outline a calculation procedure for fatigue damage rate prediction in hull girders...... taking into account whipping stresses. It is conceptually shown how such a method, which integrates onboard estimation of sea states, can be used to deduce decision support with respect to the accumulated fatigue damage in the hull girder.The paper firstly presents a set of measured full-scale wave...

Treatment of cladding hulls by the HIPOW process

International Nuclear Information System (INIS)

Larker, H.T.; Tegman, R.

1981-01-01

The conditions for densifying and bonding Zircaloy cladding hulls from spent LWR fuel to blocks by the HIPOW (hot isostatic pressing of waste) process have been studied. Fully dense and mechanically strong blocks of Zircaloy can be made without additives at temperatures around 1000 0 C. A volume reduction of about seven times and surface area reduction of more than 300 times, compared to typical loose-filled cladding hulls remaining after the chop-leach operations in a reprocessing plant, can be obtained. A study of a possible process for industrial scale has been made. Handling under water can prevent any fire hazard in the preparation sequence. The use of a special hermetically sealed double-wall metal container encasing the hulls during the densification in the hot isostatic press virtually eliminates the problem of lasting contamination of this equipment, thus greatly simplifying service and maintenance. One hot isostatic press can serve a reprocessing line with an LWR fuel capacity of 800 tons/year. Fines (residues) from fuel dissolution and alpha-contaminated ashes from incinerated organic materials in the plant may also be incorporated in the Zircaloy blocks. Tritium can quantitatively be contained in these blocks

Dual Inflation

CERN Document Server

García-Bellido, J

1998-01-01

We propose a new model of inflation based on the soft-breaking of N=2 supersymmetric SU(2) Yang-Mills theory. The advantage of such a model is the fact that we can write an exact expression for the effective scalar potential, including non-perturbative effects, which preserves the analyticity and duality properties of the Seiberg-Witten solution. We find that the scalar condensate that plays the role of the inflaton can drive a long period of cosmological expansion, produce the right amount of temperature anisotropies in the microwave background, and end inflation when the monopole acquires a vacuum expectation value. Duality properties relate the weak coupling Higgs region where inflation takes place with the strong coupling monopole region, where reheating occurs, creating particles corresponding to the light degrees of freedom in the true vacuum.

PAUT-based defect detection method for submarine pressure hulls

Directory of Open Access Journals (Sweden)

Min-jae Jung

2018-03-01

Full Text Available A submarine has a pressure hull that can withstand high hydraulic pressure and therefore, requires the use of highly advanced shipbuilding technology. When producing a pressure hull, periodic inspection, repair, and maintenance are conducted to maintain its soundness. Of the maintenance methods, Non-Destructive Testing (NDT is the most effective, because it does not damage the target but sustains its original form and function while inspecting internal and external defects. The NDT process to detect defects in the welded parts of the submarine is applied through Magnetic particle Testing (MT to detect surface defects and Ultrasonic Testing (UT and Radiography Testing (RT to detect internal defects. In comparison with RT, UT encounters difficulties in distinguishing the types of defects, can yield different results depending on the skills of the inspector, and stores no inspection record. At the same time, the use of RT gives rise to issues related to worker safety due to radiation exposure. RT is also difficult to apply from the perspectives of the manufacturing of the submarine and economic feasibility. Therefore, in this study, the Phased Array Ultrasonic Testing (PAUT method was applied to propose an inspection method that can address the above disadvantages by designing a probe to enhance the precision of detection of hull defects and the reliability of calculations of defect size. Keywords: Submarine pressure hull, Non-destructive testing, Phased array ultrasonic testing

Cosmic strings and inflation

International Nuclear Information System (INIS)

Vishniac, E.T.

1987-01-01

We examine the compatibility of inflation with the cosmic string theory for galaxy formation. There is a general conflict between having sufficient string tension to effect galaxy formation, and reheating after inflation to a high enough temperature that strings may form in a thermal phase transition. To escape this conflict, we propose a class of models where the inflation is coupled to the string-producing field. The strings are formed late in inflation as the inflaton rolls towards its zero-temperature value. A large subset of these models have a novel large-scale distribution of galaxies that is fractal, displays biasing without dynamics or feedback mechanisms, and contains voids. (orig.)

49 CFR 38.177 - Ferries, excursion boats and other vessels. [Reserved

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Ferries, excursion boats and other vessels... DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems § 38.177 Ferries, excursion boats and other vessels. [Reserved] ...

Cross Matching of VIIRS Boat Detection and Vessel Monitoring System Tracks

Science.gov (United States)

Hsu, F. C.; Elvidge, C.; Zhizhin, M. N.; Baugh, K.; Ghosh, T.

2016-12-01

One approach to commercial fishing is to use use bright lights at night to attract catch. This is a widely used practice in East and Southeast Asia, but can also be found in other fisheries. In some cases, the deployed lighting exceeds 100,000 watts. Such lighting is distinctive in dark ocean and can even be seen from space with sensor such as Visible Infrared Imaging Radiometer Suite Day/Night Band (VIIRS-DNB). We have developed a VIIRS Boat Detection (VBD) system, which outputs lists of boat locations in near real time. One of the standard methods fishery agencies use to collect geospatial data on fishing boats is to require boats to carry Vessel Monitoring System beacons. We developed an algorithm to cross-match VBD data with VMS tracks. With this we are able to identify fishing boats that do not carry VMS beacons. In certain situations, this is an indicator of illegal fishing. The other application for this cross-matching is to define the VIIRS detection limits and developing a calibration to estimate deployed wattage. Here we demonstrate results of cross matching VBD and VMS for Indonesia as example to showcase its potential.

46 CFR 71.50-3 - Drydock examination, internal structural examination, underwater survey, and alternate hull exam...

Science.gov (United States)

2010-10-01

..., underwater survey, and alternate hull exam intervals. 71.50-3 Section 71.50-3 Shipping COAST GUARD...-3 Drydock examination, internal structural examination, underwater survey, and alternate hull exam... wooden hulls must undergo two drydock and two internal structural examinations within any five year...

46 CFR 115.625 - Eligibility requirements for the Alternative Hull Examination (AHE) Program for certain passenger...

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Eligibility requirements for the Alternative Hull... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.625 Eligibility requirements for the Alternative Hull Examination (AHE) Program for certain...

Dual-chamber inflatable oil boom

International Nuclear Information System (INIS)

Blair, R.M.; Tedeschi, E.T.

1993-01-01

An elongated floating material containment boom section is described having a normally vertical ballasted skirt depending from flotation means, and convertible from a flattened collapsed condition to a deployable condition wherein buoyancy chamber means extending along the upper edge of said skirt are inflated to expanded buoyant configuration, including: a gas-impervious sleeve extending along the upper edge of said normally vertical skirt forming a first outer collapsible and inflatable flotation chamber, a first inflation valve connecting the interior of said sleeve with the ambient atmosphere, through which gas under pressure may be introduced into said sleeve to inflate said first buoyant outer flotation chamber, elongated gas-impervious tube means positioned inside said outer flotation chamber and forming second collapsible and inflatable internal flotation bladder chamber means, second inflation valve means connecting the interior of said bladder means through said outer flotation chamber to the ambient atmosphere through which gas under pressure may be introduced into said bladder means to inflate it forming said second flotation chamber means inside said outer flotation chamber

Inflation targeting and the anchoring of inflation expectations in the CEE countries

Directory of Open Access Journals (Sweden)

Nedeljković Milan

2017-01-01

Full Text Available This paper studies the time evolution in the degree and level of anchoring of inflation expectations in four Central and Eastern European inflation targeting countries. The results suggest that the degree of anchoring of inflation expectations increased gradually in all countries over the last decade, while the level of implied inflation targets moved towards the official target. The extent of anchoring increased more strongly in the first years following the IT adoption and more gradually over the later period. We also find that smooth changes of the official target had a positive impact on anchoring. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 47028: Advancing Serbia’s Competitiveness in the Process of EU Accession

Findings from Matching VIIRS Boat Detection and VMS Data

Science.gov (United States)

Hsu, F. C.; Elvidge, C.; Zhizhin, M. N.; Baugh, K.; Ghosh, T.

2017-12-01

With the superior nigthtime sensitivity and spatial resolution provided by VIIRS Day Night Band, we had developed algorithm known as VIIRS Boat Detection (VBD) to detect fishing vessels active at night using light to attract schools of fish. While VBD is effective in finding bright boats, little is known on the nature of boats that emits such bright lights. To complement the missing attribute of VBD detections, the authors find aid from Vessel Monitoring System (VMS) data. VMS is widely used in monitoring fishing vessels logging their coordinate nominally every hour, along with vessel specifications such as tonnage, size, and gear type. This study matches VMS records with VBD detections, broadening the understanding of the lighting streategy used by fisherman, and provide valuable assumption on possible vessel types for VBD detections.

46 CFR 167.15-25 - Inspection standards for hulls, boilers and machinery.

Science.gov (United States)

2010-10-01

... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Inspections § 167.15-25 Inspection standards for hulls, boilers and... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection standards for hulls, boilers and machinery... inspection. These rules may be purchased from the American Bureau of Shipping (ABS), ABS Plaza, 16855...

46 CFR 71.50-27 - Alternative Hull Examination (AHE) program options: Divers or underwater remotely operated...

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Alternative Hull Examination (AHE) program options...-27 Alternative Hull Examination (AHE) program options: Divers or underwater remotely operated vehicle... operations; (2) Provide permanent hull markings, a temporary grid system of wires or cables spaced not more...

46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative...

Understanding geological processes: Visualization of rigid and non-rigid transformations

Science.gov (United States)

Shipley, T. F.; Atit, K.; Manduca, C. A.; Ormand, C. J.; Resnick, I.; Tikoff, B.

2012-12-01

Visualizations are used in the geological sciences to support reasoning about structures and events. Research in cognitive sciences offers insights into the range of skills of different users, and ultimately how visualizations might support different users. To understand the range of skills needed to reason about earth processes we have developed a program of research that is grounded in the geosciences' careful description of the spatial and spatiotemporal patterns associated with earth processes. In particular, we are pursuing a research program that identifies specific spatial skills and investigates whether and how they are related to each other. For this study, we focus on a specific question: Is there an important distinction in the geosciences between rigid and non-rigid deformation? To study a general spatial thinking skill we employed displays with non-geological objects that had been altered by rigid change (rotation), and two types of non-rigid change ("brittle" (or discontinuous) and "ductile" (or continuous) deformation). Disciplinary scientists (geosciences and chemistry faculty), and novices (non-science faculty and undergraduate psychology students) answered questions that required them to visualize the appearance of the object before the change. In one study, geologists and chemists were found to be superior to non-science faculty in reasoning about rigid rotations (e.g., what an object would look like from a different perspective). Geologists were superior to chemists in reasoning about brittle deformations (e.g., what an object looked like before it was broken - here the object was a word cut into many fragments displaced in different directions). This finding is consistent with two hypotheses: 1) Experts are good at visualizing the types of changes required for their domain; and 2) Visualization of rigid and non-rigid changes are not the same skill. An additional important finding is that there was a broad range of skill in both rigid and non-rigid

The Flavour of Inflation

International Nuclear Information System (INIS)

Zavala, I.

2008-01-01

A new class of particle physics models of inflation based on the phase transition associated with the spontaneous breaking of family symmetry is proposed. The Higgs fields responsible for the breaking of family symmetry, the flavons, are natural inflaton candidates or waterfall fields in hybrid inflation. This opens up a rich vein of possible inflation models, all linked to the physics of flavour, with several interesting cosmological implications.

Topological defects in extended inflation

International Nuclear Information System (INIS)

Copeland, E.J.; Kolb, E.W.; Chicago Univ., IL; Liddle, A.R.

1990-04-01

We consider the production of topological defects, especially cosmic strings, in extended inflation models. In extended inflation, the Universe passes through a first-order phase transition via bubble percolation, which naturally allows defects to form at the end of inflation. The correlation length, which determines the number density of the defects, is related to the mean size of bubbles when they collide. This mechanism allows a natural combination of inflation and large-scale structure via cosmic strings. 18 refs

Topological defects in extended inflation

International Nuclear Information System (INIS)

Copeland, E.J.; Kolb, E.W.; Liddle, A.R.

1990-01-01

We consider the production of topological defects, especially cosmic strings, in extended-inflation models. In extended inflation, the Universe passes through a first-order phase transition via bubble percolation, which naturally allows defects to form at the end of inflation. The correlation length, which determines the number density of the defects, is related to the mean size of the bubbles when they collide. This mechanism allows a natural combination of inflation and large-scale structure via cosmic strings

Accidental inflation from Kaehler uplifting

International Nuclear Information System (INIS)

Ben-Dayan, Ido; Westphal, Alexander; Wieck, Clemens; Jing, Shenglin; Toronto Univ., ON

2013-09-01

We analyze the possibility of realizing inflation with a subsequent dS vacuum in the Kaehler uplifting scenario. The inclusion of several quantum corrections to the 4d effective action evades previous no-go theorems and allows for construction of simple and successful models of string inflation. The predictions of several benchmark models are in accord with current observations, i.e., a red spectral index, negligible non-gaussianity, and spectral distortions similar to the simplest models of inflation. A particularly interesting subclass of models are ''left-rolling'' ones, where the overall volume of the compactified dimensions shrinks during inflation. We call this phenomenon ''inflation by deflation'' (IBD), where deflation refers to the internal manifold. This subclass has the appealing features of being insensitive to initial conditions, avoiding the overshooting problem, and allowing for observable running α -5 . The latter results differ significantly from many string inflation models.

33 CFR 187.321 - What are the hull identification number (HIN) provisions?

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the hull identification number (HIN) provisions? 187.321 Section 187.321 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Vessel Titling Systems § 187.321 What are the hull identification number (HIN) provisions? A State must...

Unitarizing Higgs Inflation

CERN Document Server

Giudice, Gian F

2011-01-01

We consider a simple extension of the Standard Model Higgs inflation with one new real scalar field which preserves unitarity up to the Planck scale. The new scalar field (called sigma) completes in the ultraviolet the theory of Higgs inflation by linearizing the Higgs kinetic term in the Einstein frame, just as the non-linear sigma model is unitarized into its linear version. The unitarity cutoff of the effective theory, obtained by integrating out the sigma field, varies with the background value of the Higgs field. In our setup, both the Higgs field and the sigma field participate in the inflationary dynamics, following the flat direction of the potential. We obtain the same slow-roll parameters and spectral index as in the original Higgs inflation but we find that the Hubble rate during inflation depends not only on the Higgs self-coupling, but also on the unknown couplings of the sigma field.

Unitarizing Higgs inflation

International Nuclear Information System (INIS)

Giudice, Gian F.; Lee, Hyun Min

2011-01-01

We consider a simple extension of the Standard Model Higgs inflation with one new real scalar field which preserves unitarity up to the Planck scale. The new scalar field (called sigma) completes in the ultraviolet the theory of Higgs inflation by linearizing the Higgs kinetic term in the Einstein frame, just as the non-linear sigma model is unitarized into its linear version. The unitarity cutoff of the effective theory, obtained by integrating out the sigma field, varies with the background value of the Higgs field. In our setup, both the Higgs field and the sigma field participate in the inflationary dynamics, following the flat direction of the potential. We obtain the same slow-roll parameters and spectral index as in the original Higgs inflation but we find that the Hubble rate during inflation depends not only on the Higgs self-coupling, but also on the unknown couplings of the sigma field.

Extended inflation with nonminimally coupled inflation field

International Nuclear Information System (INIS)

Panchapakesan, N.; Sethi, S.K.

1992-01-01

In this paper, an extended inflation model, in which the inflation field is nonminimally coupled to the gravity, is discussed. It is shown that the nucleation rate of bubbles, during a phase transition in the inflaton field, can increase as the transition proceeds for a wide range of parameters of the inflaton potential. The bounce action for three possible cases - the strong gravity regime, the thick-walled Coleman-DeLuccia bubbles and the thin-walled bubbles - is evaluated. The resulting bubble distribution for all the cases is shown to be in conformity with cosmological constraints for ω < 500

"Keisri hull" on viimast korda laval

Index Scriptorium Estoniae

2010-01-01

Neli hooaega Ugala repertuaaris olnud Jaan Krossi romaani põhjal lavastatud draama "Keisri hull" etendub viimast korda 10. veebruaril. Viimane etendus on pühendatud Jaan Krossi 90. sünniaastapäevale, mis on 19. veebruaril. Lavastajad Peeter Tammearu ja Jaak Allik. Peaosas Peeter Tammearu

Development of aluminium pleasure boats; Arumisei pleasure boat no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Tsuzuki, A. [Toyota Motor Corp., Aichi (Japan)

1999-10-01

In February 1997, Toyota entered the marine business, a new business sector for it, by marketing a 28-foot cabin cruiser PONAM-28, developed by utilizing its automotive technologies. When Toyota began studying the possibility of entering the marine vessel industry in 1990, its main focus was on the environment. Therefore, in terms of materials procurement for the designs, Toyota refrained from using thermosetting resins, as much as possible. Instead, the decision was made to use an easily recyclable aluminum alloy for the hull which amounts to one-fourth of the vessel's total weight. (author)

Ship with a double hull used to transport liquefied gases

Energy Technology Data Exchange (ETDEWEB)

1968-07-18

A ship with a double hull is described which is used to transport liquefied gases in reservoirs which are held inside the inner hull by a glide support and surrounded by insulation. Troughs are situated at the bottom and along the adjacent ends of the side walls to catch leakage from the reservoirs. These catchers are made of a material which is tough when chilled. The catchers have a suction installation to remove the leaked fluid. (5 claims)

Tribrid Inflation in Supergravity

Science.gov (United States)

Antusch, Stefan; Dutta, Koushik; Kostka, Philipp M.

We propose a novel class of F-term hybrid inflation models in supergravity (SUGRA) where the η-problem is resolved using either a Heisenberg symmetry or a shift symmetry of the Kähler potential. In addition to the inflaton and the waterfall field, this class (referred to as tribrid inflation) contains a third "driving" field which contributes the large vacuum energy during inflation by its F-term. In contrast to the "standard" hybrid scenario, it has several attractive features due to the property of vanishing inflationary superpotential (Winf = 0) during inflation. Quantum corrections induced by symmetry breaking terms in the superpotential generate a slope of the potential and lead to a spectral tilt consistent with recent WMAP observations.

Stochastic effects in hybrid inflation

Science.gov (United States)

Martin, Jérôme; Vennin, Vincent

2012-02-01

Hybrid inflation is a two-field model where inflation ends due to an instability. In the neighborhood of the instability point, the potential is very flat and the quantum fluctuations dominate over the classical motion of the inflaton and waterfall fields. In this article, we study this regime in the framework of stochastic inflation. We numerically solve the two coupled Langevin equations controlling the evolution of the fields and compute the probability distributions of the total number of e-folds and of the inflation exit point. Then, we discuss the physical consequences of our results, in particular, the question of how the quantum diffusion can affect the observable predictions of hybrid inflation.

A two-states Markov-switching model of inflation in France and the USA: credible target VS inflation spiral

OpenAIRE

B. HEITZ

2005-01-01

This paper seeks to apply the general framework of Markov-switching models to inflation in France and in the USA. We propose a model where inflation can, alternatively, follow two regimes: the first one, where inflation is stationary, is interpreted as a situation where there exists a credible inflation target, even if it is not explicit; the second one where inflation is integrated. Moreover, observing that the two oil shocks were followed by accelerating inflation periods, we allow dependen...

Inhibition of α-glucosidase by polysaccharides from the fruit hull of Camellia oleifera Abel.

Science.gov (United States)

Zhang, Sheng; Li, Xiang-Zhou

2015-01-22

We isolated and purified polysaccharides from the Camellia oleifera Abel. fruit hull and studied its hypoglycemic potential. Our results revealed six polysaccharides (CFPA-1-5 & CFPB) from the aqueous extract from the defatted C. oleifera fruit hull. Purified polysaccharides (purity >90%) were investigated for the inhibition of α-glucosidase activity in vitro. Two polysaccharides, CFPB and CFPA-3 were present in high concentration in the fruit hull and showed a dose-dependent inhibition of α-glucosidase activity, with IC50 concentrations of 11.80 and 10.95 μg/mL, respectively. This result suggests that polysaccharides (CFP) extracted from the fruit hull of C. oleifera may have potential as functional foods with featuring a hypoglycemic effect. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Effect of Material and Side Walls on Hull Deflection during a Blast Event

Science.gov (United States)

2017-12-13

ARL-CR-0822 ● DEC 2017 US Army Research Laboratory The Effect of Material and Side Walls on Hull Deflection during a Blast Event...Army Research Laboratory The Effect of Material and Side Walls on Hull Deflection during a Blast Event prepared by Danielle Abell SURVICE...Walls on Hull Deflection during a Blast Event 5a. CONTRACT NUMBER W911QX-16-D-0014 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S

Rigid multibody system dynamics with uncertain rigid bodies

Energy Technology Data Exchange (ETDEWEB)

Batou, A., E-mail: anas.batou@univ-paris-est.fr; Soize, C., E-mail: christian.soize@univ-paris-est.fr [Universite Paris-Est, Laboratoire Modelisation et Simulation Multi Echelle, MSME UMR 8208 CNRS (France)

2012-03-15

This paper is devoted to the construction of a probabilistic model of uncertain rigid bodies for multibody system dynamics. We first construct a stochastic model of an uncertain rigid body by replacing the mass, the center of mass, and the tensor of inertia by random variables. The prior probability distributions of the stochastic model are constructed using the maximum entropy principle under the constraints defined by the available information. The generators of independent realizations corresponding to the prior probability distribution of these random quantities are further developed. Then several uncertain rigid bodies can be linked to each other in order to calculate the random response of a multibody dynamical system. An application is proposed to illustrate the theoretical development.

Effects of quinoa hull meal on piglet performance and intestinal epithelial physiology

DEFF Research Database (Denmark)

Carlson, Dorthe; Fernandez, J.A.; Poulsen, H.D.

2012-01-01

Saponin-containing feed additives have shown positive effects on pig performance. Quinoa hull has high saponin content and may be of interest as a feed additive. This study aimed to evaluate quinoa hull meal (QHM) as a feed additive in a pig diet. The effects of QHM were assessed for three dosages...

46 CFR 42.09-35 - Additional survey requirements for wood-hull vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Additional survey requirements for wood-hull vessels. 42.09-35 Section 42.09-35 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES... Additional survey requirements for wood-hull vessels. (a) In addition to the requirements in § 42.09-25, the...

THE INFLATION IMPACT OF SELECTED EUROPEAN UNION MEMBERS ON POLISH INFLATION

Directory of Open Access Journals (Sweden)

Jarosław Czaja

2012-06-01

Full Text Available The article aims at determining the inflation influence between Poland and selected EU member states. Although for some time the general inflation level in those countries was definitely controllable, the problem seems to be returning. That is why in this article, using the model of Vector AutoRegression (VAR and Granger causality test, we are attempting to determine inflation influences on Poland. The study confirmed the impact of the selected countries on Polish inflation, expressed the general HICP index. However, in the case of Germany, the method has not proved the existence of such interactions. For this reason, it is made an attempt to clarify the reasons for non-compliance findings with data showing Germany as a Polish main trading partner for more than two decades. The authors try to show that lack of influence can be seen in the excessive generality of the main HICP index and predict that the chosen method confirm the effect of foreign trade indices in the HICP.

Changes in Inflation Dynamics under Inflation Targeting? Evidence from Central European Countries

Czech Academy of Sciences Publication Activity Database

Baxa, Jaromír; Plašil, M.; Vašíček, B.

2013-01-01

Roč. 11, č. 1 (2013), s. 2-5 ISSN 1803-7089 Institutional support: RVO:67985556 Keywords : Inflation Dynamics * Inflation Targeting? Subject RIV: AH - Economics http://library.utia.cas.cz/separaty/2013/E/baxa-0395372.pdf

46 CFR 199.220 - Survival craft and rescue boat embarkation arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft and rescue boat embarkation arrangements... APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Additional Requirements for Passenger Vessels § 199.220 Survival craft and rescue boat embarkation arrangements. (a) Survival craft...

Supersymmetric Majoron inflation

Energy Technology Data Exchange (ETDEWEB)

King, Stephen F.; Ludl, Patrick Otto [School of Physics and Astronomy, University of Southampton,Southampton, SO17 1BJ (United Kingdom)

2017-03-31

We propose supersymmetric Majoron inflation in which the Majoron field Φ responsible for generating right-handed neutrino masses may also be suitable for giving low scale “hilltop” inflation, with a discrete lepton number ℤ{sub N} spontaneously broken at the end of inflation, while avoiding the domain wall problem. In the framework of non-minimal supergravity, we show that a successful spectral index can result with small running together with small tensor modes. We show that a range of heaviest right-handed neutrino masses can be generated, m{sub N}∼10{sup 1}−10{sup 16} GeV, consistent with the constraints from reheating and domain walls.

Numerical Simulation of Galvanic Corrosion Caused by Shaft Grounding Systems in Steel Ship Hulls

National Research Council Canada - National Science Library

Wang, Y

2005-01-01

.... This led to the accelerated corrosion of the exposed steel ship hull on paint holidays because of the substantial difference of the electric potentials between the steel ship hull and the nickel...

Pre-inflation physics and scalar perturbations

International Nuclear Information System (INIS)

Hirai, Shiro

2005-01-01

The effect of pre-inflation physics on the power spectrum of scalar perturbations is investigated. Considering various pre-inflation models with radiation-dominated or matter-dominated periods before inflation, the power spectra of curvature perturbations for large scales are calculated, and the spectral index and running spectral index are derived. It is shown that pre-inflation models in which the length of inflation is near 60 e-folds may reproduce some key properties implied by the Wilkinson microwave anisotropy probe data

Design of Hybrid Solar and Wind Energy Harvester for Fishing Boat

Science.gov (United States)

Banjarnahor, D. A.; Hanifan, M.; Budi, E. M.

2017-07-01

In southern beach of West Java, Indonesia, there are many villagers live as fishermen. They use small boats for fishing, in one to three days. Therefore, they need a fish preservation system. Fortunately, the area has high potential of solar and wind energy. This paper presents the design of a hybrid solar and wind energy harvester to power a refrigerator in the fishing boat. The refrigerator should keep the fish in 2 - 4 °C. The energy needed is 720 Wh daily. In the area, the daily average wind velocity is 4.27 m/s and the sun irradiation is 672 W/m2. The design combined two 100W solar panels and a 300W wind turbine. The testing showed that the solar panels can harvest 815 - 817 Wh of energy, while the wind turbine can harvest 43 - 62 Wh of energy daily. Therefore, the system can fulfil the energy requirement in fishing boat, although the solar panels were more dominant. To install the wind turbine on the fishing-boat, a computational design had been conducted. The boat hydrostatic dimension was measured to determine its stability condition. To reach a stable equilibrium condition, the wind turbine should be installed no more than 1.7 m of height.

First aid kits for recreational dive boats, what should they contain?

Science.gov (United States)

Pye, Jacqueline; Greenhalgh, Trisha

2010-09-01

Well-equipped first-aid kits are necessary but not always provided on recreational dive boats. We aimed to review the types of illness and injury likely to be encountered on such boats and inform a content list for such kits. We conducted a 3-round Delphi study by email using a volunteer panel of 18 experts drawn from diving, dive medicine and nursing. In round 1, panellists shared examples of illnesses and injuries they had come across personally. These scenarios were circulated along with findings from a literature review, including existing recommendations. In rounds 2 and 3, the list of kit for dive boats in different settings was iteratively refined through online discussion and feedback. Passengers and crew on recreational dive boats may encounter a range of medical problems from minor injuries to serious accidents and non-dive-related illnesses. Recommended kit varied depending on context and setting (e.g. distance from land, qualifications and experience of crew). Consensus was quickly reached on key first-aid items but experts' views on emergency medicines differed. The study highlights the diversity of medical problems encountered on recreational dive boats. We offer preliminary guidance on the content of suitable first-aid kits and suggest areas for further research. Copyright © 2010 Elsevier Ltd. All rights reserved.

Static analysis of the hull plate using the finite element method

Science.gov (United States)

Ion, A.

2015-11-01

This paper aims at presenting the static analysis for two levels of a container ship's construction as follows: the first level is at the girder / hull plate and the second level is conducted at the entire strength hull of the vessel. This article will describe the work for the static analysis of a hull plate. We shall use the software package ANSYS Mechanical 14.5. The program is run on a computer with four Intel Xeon X5260 CPU processors at 3.33 GHz, 32 GB memory installed. In terms of software, the shared memory parallel version of ANSYS refers to running ANSYS across multiple cores on a SMP system. The distributed memory parallel version of ANSYS (Distributed ANSYS) refers to running ANSYS across multiple processors on SMP systems or DMP systems.

IAS15 inflation adjustments and EVA: empirical evidence from a highly variable inflation regime

Directory of Open Access Journals (Sweden)

Pierre Erasmus

2011-08-01

Full Text Available Inflation can have a pronounced effect on the financial performance of a firm. This study makes inflation adjustments to a firm’s cost of sales, depreciation, level of gearing and assets in line with International Accounting Standard 15 (IAS15 in order to calculate an inflation-adjusted version of the economic value added (EVA measure. The study was conducted using data from South African industrial firms during a period characterised by highly variable inflation levels (1991-2005. The results indicate that during this period there were significant differences between the nominal and real values of the firms’ EVAs

Classification of Fusarium-Infected Korean Hulled Barley Using Near-Infrared Reflectance Spectroscopy and Partial Least Squares Discriminant Analysis

Directory of Open Access Journals (Sweden)

Jongguk Lim

2017-09-01

Full Text Available The purpose of this study is to use near-infrared reflectance (NIR spectroscopy equipment to nondestructively and rapidly discriminate Fusarium-infected hulled barley. Both normal hulled barley and Fusarium-infected hulled barley were scanned by using a NIR spectrometer with a wavelength range of 1175 to 2170 nm. Multiple mathematical pretreatments were applied to the reflectance spectra obtained for Fusarium discrimination and the multivariate analysis method of partial least squares discriminant analysis (PLS-DA was used for discriminant prediction. The PLS-DA prediction model developed by applying the second-order derivative pretreatment to the reflectance spectra obtained from the side of hulled barley without crease achieved 100% accuracy in discriminating the normal hulled barley and the Fusarium-infected hulled barley. These results demonstrated the feasibility of rapid discrimination of the Fusarium-infected hulled barley by combining multivariate analysis with the NIR spectroscopic technique, which is utilized as a nondestructive detection method.

Numerical Investigation of Resistance Reduction of Fishing Boat by Improving Stern Part

OpenAIRE

Baso, Suandar

2013-01-01

In recent years, to achieve a goal of reducing greenhouse gas, a fishing boat which is very economical on gas should be needed. Over the last two decades, improvements of bow part in fishing boat have been researched to reduce water resistance. Moreover, stern End Bulb research took place mostly in Japan. No one finds universal knowledge for reducing drag resistance because many fishing boats run with individual catching styles for each fish. It is also difficult to appropriate some technique...

Gamma radiation effects on phenolics, antioxidants activity and in vitro digestion of pistachio ( Pistachia vera) hull

Science.gov (United States)

Behgar, M.; Ghasemi, S.; Naserian, A.; Borzoie, A.; Fatollahi, H.

2011-09-01

The effect of gamma radiation (10, 20, 30, 40, 50 and 60 kGy) on tannin, total phenolics, antioxidants activity and in vitro digestion of pistachio hulls has been investigated in this study. The possibility of using the radial diffusion method based on software measurement of the rings area has also been investigated in this study. The software based method in radial diffusion method showed a higher r2 (0.995) value when compared to the traditional method. Irradiation reduced the tannin content ( Ppistachio hull extracts but increased the total phenolic content ( Ppistachio hull. Irradiation decreased the digestion rate of the pistachio hull at the dose of 40 kGy when compared to the control. This study showed that gamma irradiation decreased tannin and antioxidants activity of pistachio hull.

''Old'' locked inflation

Energy Technology Data Exchange (ETDEWEB)

Liu, Yang; Piao, Yun-Song [College of Physical Sciences, Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Si, Zong-Guo, E-mail: liuyangbyf@mail.sdu.edu.cn, E-mail: yspiao@gucas.ac.cn, E-mail: zgsi@sdu.edu.cn [Department of Physics, Shandong University, Jinan 250100 (China)

2009-05-15

In this paper, we revisit the idea of locked inflation, which does not require a potential satisfying the normal slow-roll condition, but suffers from the problems associated with ''saddle inflation''. We propose a scenario based on locked inflation, however, with an alternative evolution mechanism of the ''waterfall field'' {phi}. Instead of rolling down along the potential, the {phi} field will tunnel to end the inflation stage like in old inflation, by which the saddle inflation could be avoided. Further, we study a cascade of old locked inflation, which can be motivated by the string landscape. Our model is based on the consideration of making locked inflation feasible so as to give a working model without slow roll; It also can be seen as an effort to embed the old inflation in string landscape.

The Effect of Hull Biofouling on Parameters Characterising Ship Propulsion System Efficiency

Directory of Open Access Journals (Sweden)

Tarełko Wiesła

2015-01-01

Full Text Available One of most important issues concerning technical objects is the increase of their operating performance. For a ship this performance mainly depends on the efficiency of its main pro-pulsion system and the resistance generated during its motion on water. The overall ship re-sistance, in turn, mainly depends on the hull friction resistance, closely related with the pres-ence of different types of roughness on the hull surface, including underwater part biofouling. The article analyses the effect of hull biofouling on selected parameters characterising the efficiency of the ship propulsion system with adjustable propeller. For this purpose a two-year research experiment was performed on a sailing vessel during its motor navigation phases. Based on the obtained results, three groups of characteristics were worked out for different combinations of engine rotational speed and adjustable propeller pitch settings. The obtained results have revealed that the phenomenon of underwater hull biofouling affects remarkably the parameters characterising propulsion system efficiency. In particular, the development of the biofouling layer leads to significant reduction of the speed of navigation.

Estimating Venezuelas Latent Inflation

OpenAIRE

Juan Carlos Bencomo; Hugo J. Montesinos; Hugo M. Montesinos; Jose Roberto Rondo

2011-01-01

Percent variation of the consumer price index (CPI) is the inflation indicator most widely used. This indicator, however, has some drawbacks. In addition to measurement errors of the CPI, there is a problem of incongruence between the definition of inflation as a sustained and generalized increase of prices and the traditional measure associated with the CPI. We use data from 1991 to 2005 to estimate a complementary indicator for Venezuela, the highest inflation country in Latin America. Late...

Tubing erosion of an inflatable penile prosthesis long after implantation.

Science.gov (United States)

Morales, Alvaro

2014-06-01

Erosion through skin of connecting tubing of an inflatable penile prosthesis (IPP) has not been previously reported. The aim of this study was to present a case of tubing erosion, review the pertinent literature, and discuss the possible causes and management options, including preservation of the device and its components. A 42-year-old male failing to respond to medical treatment for erectile dysfunction underwent insertion of an AMS 700 IPP in 1986. Six years later, a revision was necessary because of a leak in the right cylinder and 4 years after, the pump was replaced. Fourteen years after the original implant, he presented with a portion of the tube connecting the pump to the right cylinder eroding through the skin. There was no infection. The skin area involved was resected and the original pump and tubing were buried in a new scrotal pocket after thorough irrigation. The IPP remained in place, allowing vaginal penetration and without infection for another 11 years. Three years later, it was de-functionalized, converted into a fixed volume device. It eventually was replaced 25 years after originally implanted with a semirigid prosthesis because it did not provide sufficient rigidity and because of concerns about the presence of "screws" detected during pelvic imaging. Mechanical failures in the early IPP models, as illustrated in this case, were expected. However, the long survival of the device is remarkable. Erosion of the connecting tubing through the skin is unique and, under exceptional circumstances, may be managed conservatively without replacing components of the IPP. Clinicians unfamiliar with procedures involving inflatable devices need to be aware of "foreign bodies" visible in radiological examinations in men who have had revisions of an IPP. Morales A. Tubing erosion of an inflatable penile prosthesis long after implantation. Sex Med 2014;2:103-106.

12 CFR 19.240 - Inflation adjustments.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Inflation adjustments. 19.240 Section 19.240... PROCEDURE Civil Money Penalty Inflation Adjustments § 19.240 Inflation adjustments. (a) The maximum amount... Civil Penalties Inflation Adjustment Act of 1990 (28 U.S.C. 2461 note) as follows: ER10NO08.001 (b) The...

Boat And Shore Oracle Data Tables

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Oracle Tables To Provide Boat and Shore Data which contains the object of this system is to provide an inventory of vessels that answer two fundamental questions:...

Mutated hilltop inflation revisited

Science.gov (United States)

Pal, Barun Kumar

2018-05-01

In this work we re-investigate pros and cons of mutated hilltop inflation. Applying Hamilton-Jacobi formalism we solve inflationary dynamics and find that inflation goes on along the {W}_{-1} branch of the Lambert function. Depending on the model parameter mutated hilltop model renders two types of inflationary solutions: one corresponds to small inflaton excursion during observable inflation and the other describes large field inflation. The inflationary observables from curvature perturbation are in tune with the current data for a wide range of the model parameter. The small field branch predicts negligible amount of tensor to scalar ratio r˜ O(10^{-4}), while the large field sector is capable of generating high amplitude for tensor perturbations, r˜ O(10^{-1}). Also, the spectral index is almost independent of the model parameter along with a very small negative amount of scalar running. Finally we find that the mutated hilltop inflation closely resembles the α -attractor class of inflationary models in the limit of α φ ≫ 1.