RTA, a candidate G protein-coupled receptor: Cloning, sequencing, and tissue distribution

International Nuclear Information System (INIS)

Ross, P.C.; Figler, R.A.; Corjay, M.H.; Barber, C.M.; Adam, N.; Harcus, D.R.; Lynch, K.R.

1990-01-01

Genomic and cDNA clones, encoding a protein that is a member of the guanine nucleotide-binding regulatory protein (G protein)-coupled receptor superfamily, were isolated by screening rat genomic and thoracic aorta cDNA libraries with an oligonucleotide encoding a highly conserved region of the M 1 muscarinic acetylcholine receptor. Sequence analyses of these clones showed that they encode a 343-amino acid protein (named RTA). The RTA gene is single copy, as demonstrated by restriction mapping and Southern blotting of genomic clones and rat genomic DNA. RTA RNA sequences are relatively abundant throughout the gut, vas deferens, uterus, and aorta but are only barely detectable (on Northern blots) in liver, kidney, lung, and salivary gland. In the rat brain, RTA sequences are markedly abundant in the cerebellum. TRA is most closely related to the mas oncogene (34% identity), which has been suggested to be a forebrain angiotensin receptor. They conclude that RTA is not an angiotensin receptor; to date, they have been unable to identify its ligand

Ricin as a weapon of mass terror--separating fact from fiction.

Science.gov (United States)

Schep, Leo J; Temple, Wayne A; Butt, Grant A; Beasley, Michael D

2009-11-01

In recent years there has been an increased concern regarding the potential use of chemical and biological weapons for mass urban terror. In particular, there are concerns that ricin could be employed as such an agent. This has been reinforced by recent high profile cases involving ricin, and its use during the cold war to assassinate a high profile communist dissident. Nevertheless, despite these events, does it deserve such a reputation? Ricin is clearly toxic, though its level of risk depends on the route of entry. By ingestion, the pathology of ricin is largely restricted to the gastrointestinal tract where it may cause mucosal injuries; with appropriate treatment, most patients will make a full recovery. As an agent of terror, it could be used to contaminate an urban water supply, with the intent of causing lethality in a large urban population. However, a substantial mass of pure ricin powder would be required. Such an exercise would be impossible to achieve covertly and would not guarantee success due to variables such as reticulation management, chlorination, mixing, bacterial degradation and ultra-violet light. By injection, ricin is lethal; however, while parenteral delivery is an ideal route for assassination, it is not realistic for an urban population. Dermal absorption of ricin has not been demonstrated. Ricin is also lethal by inhalation. Low doses can lead to progressive and diffuse pulmonary oedema with associated inflammation and necrosis of the alveolar pneumocytes. However, the risk of toxicity is dependent on the aerodynamic equivalent diameter (AED) of the ricin particles. The AED, which is an indicator of the aerodynamic behaviour of a particle, must be of sufficiently low micron size as to target the human alveoli and thereby cause major toxic effects. To target a large population would also necessitate a quantity of powder in excess of several metric tons. The technical and logistical skills required to formulate such a mass of powder to

Characterization of Ricin and R. communis Agglutinin Reference Materials

Science.gov (United States)

Worbs, Sylvia; Skiba, Martin; Söderström, Martin; Rapinoja, Marja-Leena; Zeleny, Reinhard; Russmann, Heiko; Schimmel, Heinz; Vanninen, Paula; Fredriksson, Sten-Åke; Dorner, Brigitte G.

2015-01-01

Ricinus communis intoxications have been known for centuries and were attributed to the toxic protein ricin. Due to its toxicity, availability, ease of preparation, and the lack of medical countermeasures, ricin attracted interest as a potential biological warfare agent. While different technologies for ricin analysis have been established, hardly any universally agreed-upon “gold standards” are available. Expert laboratories currently use differently purified in-house materials, making any comparison of accuracy and sensitivity of different methods nearly impossible. Technically challenging is the discrimination of ricin from R. communis agglutinin (RCA120), a less toxic but highly homologous protein also contained in R. communis. Here, we established both highly pure ricin and RCA120 reference materials which were extensively characterized by gel electrophoresis, liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI MS/MS), and matrix-assisted laser desorption ionization–time of flight approaches as well as immunological and functional techniques. Purity reached >97% for ricin and >99% for RCA120. Different isoforms of ricin and RCA120 were identified unambiguously and distinguished by LC-ESI MS/MS. In terms of function, a real-time cytotoxicity assay showed that ricin is approximately 300-fold more toxic than RCA120. The highly pure ricin and RCA120 reference materials were used to conduct an international proficiency test. PMID:26703723

Characterization of Ricin and R. communis Agglutinin Reference Materials

Directory of Open Access Journals (Sweden)

Sylvia Worbs

2015-11-01

Full Text Available Ricinus communis intoxications have been known for centuries and were attributed to the toxic protein ricin. Due to its toxicity, availability, ease of preparation, and the lack of medical countermeasures, ricin attracted interest as a potential biological warfare agent. While different technologies for ricin analysis have been established, hardly any universally agreed-upon “gold standards” are available. Expert laboratories currently use differently purified in-house materials, making any comparison of accuracy and sensitivity of different methods nearly impossible. Technically challenging is the discrimination of ricin from R. communis agglutinin (RCA120, a less toxic but highly homologous protein also contained in R. communis. Here, we established both highly pure ricin and RCA120 reference materials which were extensively characterized by gel electrophoresis, liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI MS/MS, and matrix-assisted laser desorption ionization–time of flight approaches as well as immunological and functional techniques. Purity reached >97% for ricin and >99% for RCA120. Different isoforms of ricin and RCA120 were identified unambiguously and distinguished by LC-ESI MS/MS. In terms of function, a real-time cytotoxicity assay showed that ricin is approximately 300-fold more toxic than RCA120. The highly pure ricin and RCA120 reference materials were used to conduct an international proficiency test.

An imaging flow cytometry method to assess ricin trafficking in A549 human lung epithelial cells.

Science.gov (United States)

Jenner, Dominic; Chong, Damien; Walker, Nicola; Green, A Christopher

2018-02-01

The endocytosis and trafficking of ricin in mammalian cells is an important area of research for those producing ricin anti-toxins and other ricin therapeutics. Ricin trafficking is usually observed by fluorescence microscopy techniques. This gives good resolution and leads to a detailed understanding of the internal movement of ricin within cells. However, microscopy techniques are often hampered by complex analysis and quantification techniques, and the inability to look at ricin trafficking in large populations of cells. In these studies we have directly labelled ricin and assessed if its trafficking can be observed using Imaging Flow Cytometry (IFC) both to the cytoplasmic region of cells and specifically to the Golgi apparatus. Using IDEAS® data analysis software the specific fluorescence location of the ricin within the cells was analysed. Then, using cytoplasmic masking techniques to quantify the number of cells with endocytosed cytoplasmic ricin or cells with Golgi-associated ricin, kinetic endocytosis curves were generated. Here we present, to the authors' knowledge, the first example of using imaging flow cytometry for evaluating the subcellular transport of protein cargo, using the trafficking of ricin toxin in lung cells as a model. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Turbine Based Combined/Combination Cycle/RTA Project Overview

Science.gov (United States)

Bartolotta, Paul A.; Quigley, Brian F.

2000-01-01

This viewgraph presentation gives an overview of the Revolutionary Turbine Accelerator (RTA) program. Details are given on the Single Stage To Orbit (SSTO) and Two Stage To Orbit (TSTO) aircraft, and the technological challenges associated with the RTA, SSTO, and TSTO.

Recommended Immunological Assays to Screen for Ricin-Containing Samples

Directory of Open Access Journals (Sweden)

Stéphanie Simon

2015-11-01

Full Text Available Ricin, a toxin from the plant Ricinus communis, is one of the most toxic biological agents known. Due to its availability, toxicity, ease of production and absence of curative treatments, ricin has been classified by the Centers for Disease Control and Prevention (CDC as category B biological weapon and it is scheduled as a List 1 compound in the Chemical Weapons Convention. An international proficiency test (PT was conducted to evaluate detection and quantification capabilities of 17 expert laboratories. In this exercise one goal was to analyse the laboratories’ capacity to detect and differentiate ricin and the less toxic, but highly homologuous protein R. communis agglutinin (RCA120. Six analytical strategies are presented in this paper based on immunological assays (four immunoenzymatic assays and two immunochromatographic tests. Using these immunological methods “dangerous” samples containing ricin and/or RCA120 were successfully identified. Based on different antibodies used the detection and quantification of ricin and RCA120 was successful. The ricin PT highlighted the performance of different immunological approaches that are exemplarily recommended for highly sensitive and precise quantification of ricin.

Forensic assays of ricin: development of snp assays to generate precise genetic signatures for mixed genotypes found in ricin preparations

Energy Technology Data Exchange (ETDEWEB)

Jackson, Paul J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hill, Karen K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2009-11-09

The results outlined in this report provide the information for needed to apply a SNP-based forensic analysis to diverse ricin preparations. The same methods could be useful in castor breeding programs that seek to reduce or eliminate ricin in oil-producing R. communis cultivars.

Märta Tikkanen’s gender and alcohol saga

DEFF Research Database (Denmark)

Mai, Anne-Marie

2017-01-01

to the relationship by alcoholism. The poetry collection became one of the most influential books in contemporary Nordic fiction, its themes on gender roles and alcohol abuse setting the trend in the Nordic discussion of women’s liberation. Märta Tikkanen’s courage to tell her own private story inspired other women...... to confess their gender equality problems to the public. The alcohol abuse of Märta Tikkanen’s husband Henrik Tikkanen was seen as an allegory for the more general problems in the relation between men and women. My essay introduces Märta Tikkanen’s poetry collection and discusses how the poems develop...... the theme of gender and alcohol. I will also compare her description of their marriage with Henrik Tikkanen’s self-portrait in his autobiographical novella Mariegatan 26, Kronohagen (1977). The analysis refers to contemporary research on gender and alcohol abuse and discusses how the poems contribute...

A novel swine model of ricin-induced acute respiratory distress syndrome

Directory of Open Access Journals (Sweden)

Shahaf Katalan

2017-02-01

Full Text Available Pulmonary exposure to the plant toxin ricin leads to respiratory insufficiency and death. To date, in-depth study of acute respiratory distress syndrome (ARDS following pulmonary exposure to toxins is hampered by the lack of an appropriate animal model. To this end, we established the pig as a large animal model for the comprehensive study of the multifarious clinical manifestations of pulmonary ricinosis. Here, we report for the first time, the monitoring of barometric whole body plethysmography for pulmonary function tests in non-anesthetized ricin-treated pigs. Up to 30 h post-exposure, as a result of progressing hypoxemia and to prevent carbon dioxide retention, animals exhibited a compensatory response of elevation in minute volume, attributed mainly to a large elevation in respiratory rate with minimal response in tidal volume. This response was followed by decompensation, manifested by a decrease in minute volume and severe hypoxemia, refractory to oxygen treatment. Radiological evaluation revealed evidence of early diffuse bilateral pulmonary infiltrates while hemodynamic parameters remained unchanged, excluding cardiac failure as an explanation for respiratory insufficiency. Ricin-intoxicated pigs suffered from increased lung permeability accompanied by cytokine storming. Histological studies revealed lung tissue insults that accumulated over time and led to diffuse alveolar damage. Charting the decline in PaO2/FiO2 ratio in a mechanically ventilated pig confirmed that ricin-induced respiratory damage complies with the accepted diagnostic criteria for ARDS. The establishment of this animal model of pulmonary ricinosis should help in the pursuit of efficient medical countermeasures specifically tailored to deal with the respiratory deficiencies stemming from ricin-induced ARDS.

Isolation of Anti-Ricin Protective Antibodies Exhibiting High Affinity from Immunized Non-Human Primates

Directory of Open Access Journals (Sweden)

Tal Noy-Porat

2016-03-01

Full Text Available Ricin, derived from the castor bean plant Ricinus communis, is one of the most potent and lethal toxins known, against which there is no available antidote. To date, the use of neutralizing antibodies is the most promising post-exposure treatment for ricin intoxication. The aim of this study was to isolate high affinity anti-ricin antibodies that possess potent toxin-neutralization capabilities. Two non-human primates were immunized with either a ricin-holotoxin- or subunit-based vaccine, to ensure the elicitation of diverse high affinity antibodies. By using a comprehensive set of primers, immune scFv phage-displayed libraries were constructed and panned. A panel of 10 antibodies (five directed against the A subunit of ricin and five against the B subunit was isolated and reformatted into a full-length chimeric IgG. All of these antibodies were found to neutralize ricin in vitro, and several conferred full protection to ricin-intoxicated mice when given six hours after exposure. Six antibodies were found to possess exceptionally high affinity toward the toxin, with KD values below pM (koff < 1 × 10−7 s−1 that were well correlated with their ability to neutralize ricin. These antibodies, alone or in combination, could be used for the development of a highly-effective therapeutic preparation for post-exposure treatment of ricin intoxication.

Synergistic autoactivation of the Epstein-Barr virus immediate-early BRLF1 promoter by Rta and Zta

International Nuclear Information System (INIS)

Liu Pingfan; Speck, Samuel H.

2003-01-01

Expression of two Epstein-Barr virus (EBV) immediate-early gene products, Zta (encoded by the BZLF1 gene) and Rta (encoded by the BRLF1 gene), are required for the switch from latent infection to virus replication. We have analyzed the regions of the BRLF1 gene promoter (Rp) that are required for Rta and Zta transactivation of Rp. Notably, significant synergy between the actions of Rta and Zta on Rp was observed in both a B cell line (DG75) and an epithelial cell line (293), suggesting that during induction of the viral lytic cycle low levels of these viral transactivators are likely sufficient to initiate the entire lytic cascade. However, while two Zta binding sites (ZREs) have been identified in Rp, the proximal ZRE was the dominant site for mediating Zta transactivation. Rta activation of Rp was diminished by mutation of the proximal Sp1 binding site, as previously reported (J. Virol. 75 (2001), 5240), but mutation of this site only had a modest impact on transactivation of Rp by Rta in the presence of Zta. Further deletion analyses of Rp failed to identify a critical site for Rta transactivation of Rp in the presence of Zta, with the exception of deleting the TATAA box of Rp, suggesting that a non-DNA binding mechanism may be involved in the observed activation of Rp by Rta. We also observed promiscuous activation of several reporter constructs by Rta, suggesting that Rta activation of gene expression may involve a general non-DNA binding mechanism. Decreasing the amount of transfected Rta expression vector reduced background Rta activation, while retaining specific activation of Rp

Forensic Applications of Light-Element Stable Isotope Ratios of Ricinus communis Seeds and Ricin Preparations

Energy Technology Data Exchange (ETDEWEB)

Kreuzer, Helen W.; West, Jason B.; Ehleringer, James

2013-01-01

Seeds of the castor plant Ricinus communis, also known as castor beans, are of forensic interest because they are the source of the poison ricin. We have tested whether stable isotope ratios of castor seeds and ricin prepared by various methods can be used as a forensic signature. We collected over 300 castor seed samples from locations around the world and measured the C, N, O, and H stable isotope ratios of the whole seeds, oil, and three types of ricin preparations. Our results demonstrate that N isotope ratios can be used to correlate ricin prepared by any of these methods to source seeds. Further, stable isotope ratios distinguished >99% of crude and purified ricin protein samples in pair-wise comparison tests. Stable isotope ratios therefore constitute a valuable forensic signature for ricin preparations.

RK-TBA studies at the RTA test facility

International Nuclear Information System (INIS)

Lidia, S.; Anderson, D.; Eylon, S.; Henestroza, E.; Houck, T.; Reginato, L.; Vanecek, D.; Westenskow, G.

1997-01-01

Construction of a prototype RF power source based on the RK-TBA concept, called the RTA, has commenced at the Lawrence Berkeley National Laboratory. This prototype will be used to study physics, engineering, and costing issues involved in the application of the RK-TBA concept to linear colliders. The status of the prototype is presented, specifically the 1-MV, 1.2-kA induction electron gun and the pulsed power system that are in assembly. The RTA program theoretical effort, in addition to supporting the development of the prototype, has been studying optimization parameters for the application of the RK-TBA concept to higher-energy linear colliders. An overview of this work is presented. copyright 1997 American Institute of Physics

Piezoresistive microcantilever aptasensor for ricin detection and kinetic analysis

Directory of Open Access Journals (Sweden)

Zhi-Wei Liu

2015-04-01

Full Text Available Up to now, there has been no report on target molecules detection by a piezoresistive microcantilever aptasensor. In order to evaluate the test performance and investigate the response dynamic characteristics of a piezoresistive microcantilever aptasensor, a novel method for ricin detection and kinetic analysis based on a piezoresistive microcantilever aptasensor was proposed, where ricin aptamer was immobilised on the microcantilever surface by biotin-avidin binding system. Results showed that the detection limit of ricin was 0.04μg L−1 (S/N ≥ 3. A linear relationship between the response voltage and the concentration of ricin in the range of 0.2μg L−1-40μg L−1 was obtained, with the linear regression equation of ΔUe = 0.904C + 5.852 (n = 5, R = 0.991, p < 0.001. The sensor showed no response for abrin, BSA, and could overcome the influence of complex environmental disruptors, indicating high specificity and good selectivity. Recovery and reproducibility in the result of simulated samples (simulated water, soil, and flour sample determination met the analysis requirements, which was 90.5∼95.5% and 7.85%∼9.39%, respectively. On this basis, a reaction kinetic model based on ligand-receptor binding and the relationship with response voltage was established. The model could well reflect the dynamic response of the sensor. The correlation coefficient (R was greater than or equal to 0.9456 (p < 0.001. Response voltage (ΔUe and response time (t0 obtained from the fitting equation on different concentrations of ricin fitted well with the measured values.

Simultaneous Detection of Ricin and Abrin DNA by Real-Time PCR (qPCR

Directory of Open Access Journals (Sweden)

Roman Wölfel

2012-08-01

Full Text Available Ricin and abrin are two of the most potent plant toxins known and may be easily obtained in high yield from the seeds using rather simple technology. As a result, both toxins are potent and available toxins for criminal or terrorist acts. However, as the production of highly purified ricin or abrin requires sophisticated equipment and knowledge, it may be more likely that crude extracts would be used by non-governmental perpetrators. Remaining plant-specific nucleic acids in these extracts allow the application of a real-time PCR (qPCR assay for the detection and identification of abrin or ricin genomic material. Therefore, we have developed a duplex real-time PCR assays for simultaneous detection of ricin and abrin DNA based on the OmniMix HS bead PCR reagent mixture. Novel primers and hybridization probes were designed for detection on a SmartCycler instrument by using 5′-nuclease technology. The assay was thoroughly optimized and validated in terms of analytical sensitivity. Evaluation of the assay sensitivity by probit analysis demonstrated a 95% probability of detection at 3 genomes per reaction for ricin DNA and 1.2 genomes per reaction for abrin DNA. The suitability of the assays was exemplified by detection of ricin and abrin contaminations in a food matrix.

Inactivation of Ricin Toxin by Nanosecond Pulsed Electric Fields Including Evidences from Cell and Animal Toxicity

Science.gov (United States)

Wei, Kai; Li, Wei; Gao, Shan; Ji, Bin; Zang, Yating; Su, Bo; Wang, Kaile; Yao, Maosheng; Zhang, Jue; Wang, Jinglin

2016-01-01

Ricin is one of the most toxic and easily produced plant protein toxin extracted from the castor oil plant, and it has been classified as a chemical warfare agent. Here, nanosecond pulsed electric fields (nsPEFs) at 30 kV/cm (pulse durations: 10 ns, 100 ns, and 300 ns) were applied to inactivating ricin up to 4.2 μg/mL. To investigate the efficacy, cells and mice were tested against the ricin treated by the nsPEFs via direct intraperitoneal injection and inhalation exposure. Results showed that nsPEFs treatments can effectively reduce the toxicity of the ricin. Without the nsPEFs treatment, 100% of mice were killed upon the 4 μg ricin injection on the first day, however 40% of the mice survived the ricin treated by the nsPEFs. Compared to injection, inhalation exposure even with higher ricin dose required longer time to observe mice fatality. Pathological observations revealed damages to heart, lung, kidney, and stomach after the ricin exposure, more pronounced for lung and kidney including severe bleeding. Sodium dodecyl sulfate polyacrylamide gel electrophoresis(SDS-PAGE) and circular dichroism (CD) analyses revealed that although the primary structure of ricin was not altered, its secondary structures (beta-sheet and beta-turn) underwent transition upon the nsPEFs treatment. PMID:26728251

Frequency, causes and human impact of motor vehicle-related road traffic accident (RTA) in Lubumbashi, Democratic Republic of Congo.

Science.gov (United States)

Nangana, Luzitu Severin; Monga, Ben; Ngatu, Nlandu Roger; Mbelambela, Etongola Papy; Mbutshu, Lukuke Hendrick; Malonga, Kaj Francoise

2016-09-01

Road traffic accident (RTA)-related trauma remains a public health issue. The aim of this study was to determine the frequency, causes and human impact of motor vehicle-related RTA in Lubumbashi, Democratic Republic of Congo. A prospective cross-sectional study was conducted in the first semester of the year 2015 in which 288 drivers (144 RTA-causing drivers and 144 control drivers who have been declared not guilty by road safety agents) involved in 144 motor vehicle-related RTA were interviewed, and only data on all RTA involving two motor vehicles with at least four wheels were recorded and analyzed. Results showed a total of 144 RTA that involved two motor vehicles with four wheels occurring during the study period which affected 104 people, including 93 injury and 11 fatality cases. The mean age of RTA-causing drivers was 33.8 ± 7.4, whereas it was 35 ± 8.8 for control drivers. The majority of RTA-causing drivers (53.4 %) did not attend a driving school. Over speeding (32 %), distracted driving (22 %), overtaking (16 %) and careless driving/risky maneuver (15 %) and driving under the influence of alcohol (9 %) were the main causes of RTA occurrence. In addition, the absence of a valid driving license [aOR = 12.74 (±2.71); 95 % CI 3.877-41.916; p = 0.015], unfastened seat belt for the RTA-causing driver [aOR = 1.85 (±0.62); 95 % CI 1.306-6.661; p = 0.048] and presence of damages on RTA-causing vehicle [aOR = 33.56 (24.01); 95 % CI 1.429-78.352; p = 0.029] were associated with the occurrence of RTA-related fatality. This study showed a relatively high frequency of RTA occurring in Lubumbashi and suggests the necessity to reinforce road traffic regulation.

Evaluation of a Ricin Vaccine Candidate for Human Toxicity Using an In Vitro Vascular Leak Model

National Research Council Canada - National Science Library

Porter, Aimee; Hale, Martha L; Pace, Amanda; Rosario, John-Michael; DaSilva, Luis

2004-01-01

Inhaling lethal doses of ricin (RT) causes pulmonary edema and results in death. In lower concentrations, ricin minimally causes tissue damage to the respiratory tract and lungs, which can incapacitate the individuals exposed to this toxin...

Calcium-activated-calcineurin reduces the In vitro and In vivo sensitivity of fluconazole to Candida albicans via Rta2p.

Directory of Open Access Journals (Sweden)

Yu Jia

Full Text Available Due to the emergence of drug-resistance, first-line therapy with fluconazole (FLC increasingly resulted in clinical failure for the treatment of candidemia. Our previous studies found that in vitro RTA2 was involved in the calcineurin-mediated resistance to FLC in C. albicans. In this study, we found that calcium-activated-calcineurin significantly reduced the in vitro sensitivity of C. albicans to FLC by blocking the impairment of FLC to the plasma membrane via Rta2p. Furthermore, we found that RTA2 itself was not involved in C. albicans virulence, but the disruption of RTA2 dramatically increased the therapeutic efficacy of FLC in a murine model of systemic candidiasis. Conversely, both re-introduction of one RTA2 allele and ectopic expression of RTA2 significantly reduced FLC efficacy in a mammalian host. Finally, we found that calcium-activated-calcineurin, through its target Rta2p, dramatically reduced the efficacy of FLC against candidemia. Given the critical roles of Rta2p in controlling the efficacy of FLC, Rta2p can be a potential drug target for antifungal therapies.

Rapid Detection of Ricin in Serum Based on Cu-Chelated Magnetic Beads Using Mass Spectrometry

Science.gov (United States)

Zhao, Yong-Qiang; Song, Jian; Wang, Hong-Li; Xu, Bin; Liu, Feng; He, Kun; Wang, Na

2016-04-01

The protein toxin ricin obtained from castor bean plant (Ricinus communis) seeds is a potent biological warfare agent due to its ease of availability and acute toxicity. In this study, we demonstrated a rapid and simple method to detect ricin in serum in vitro. The ricin was mixed with serum and digested by trypsin, then all the peptides were efficiently extracted using Cu-chelated magnetic beads and were detected with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The specific ricin peptides were identified by Nanoscale Ultra Performance liquid chromatography coupled to tandem mass spectrometry according to their sequences. The assay required 2.5 hours, and a characteristic peptide could be detected down to 4 ng/μl and used as a biomarker to detect ricin in serum. The high sensitivity and simplicity of the procedure makes it valuable in clinical practice.

Epstein-Barr virus (EBV Rta-mediated EBV and Kaposi's sarcoma-associated herpesvirus lytic reactivations in 293 cells.

Directory of Open Access Journals (Sweden)

Yen-Ju Chen

Full Text Available Epstein-Barr virus (EBV Rta belongs to a lytic switch gene family that is evolutionarily conserved in all gamma-herpesviruses. Emerging evidence indicates that cell cycle arrest is a common means by which herpesviral immediate-early protein hijacks the host cell to advance the virus's lytic cycle progression. To examine the role of Rta in cell cycle regulation, we recently established a doxycycline (Dox-inducible Rta system in 293 cells. In this cell background, inducible Rta modulated the levels of signature G1 arrest proteins, followed by induction of the cellular senescence marker, SA-β-Gal. To delineate the relationship between Rta-induced cell growth arrest and EBV reactivation, recombinant viral genomes were transferred into Rta-inducible 293 cells. Somewhat unexpectedly, we found that Dox-inducible Rta reactivated both EBV and Kaposi's sarcoma-associated herpesvirus (KSHV, to similar efficacy. As a consequence, the Rta-mediated EBV and KSHV lytic replication systems, designated as EREV8 and ERKV, respectively, were homogenous, robust, and concurrent with cell death likely due to permissive lytic replication. In addition, the expression kinetics of EBV lytic genes in Dox-treated EREV8 cells was similar to that of their KSHV counterparts in Dox-induced ERKV cells, suggesting that a common pathway is used to disrupt viral latency in both cell systems. When the time course was compared, cell cycle arrest was achieved between 6 and 48 h, EBV or KSHV reactivation was initiated abruptly at 48 h, and the cellular senescence marker was not detected until 120 h after Dox treatment. These results lead us to hypothesize that in 293 cells, Rta-induced G1 cell cycle arrest could provide (1 an ideal environment for virus reactivation if EBV or KSHV coexists and (2 a preparatory milieu for cell senescence if no viral genome is available. The latter is hypothetical in a transient-lytic situation.

Forensic determination of ricin and the alkaloid marker ricinine from castor bean extracts.

Science.gov (United States)

Darby, S M; Miller, M L; Allen, R O

2001-09-01

Liquid chromatography/mass spectrometry (LC/ MS) and matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS methods were developed for the presumptive identification of ricin toxin and the alkaloid marker ricinine from crude plant materials. Ricin is an extremely potent poison, which is of forensic interest due to its appearance in terrorism literature and its potential for use as a homicide agent. Difficulties arise in attempting to analyze ricin because it is a large heterogeneous protein with glycosylation. The general protein identification scheme developed uses LC/MS or MALDI-TOF for size classification followed by the use of the same instrumentation for the analysis of the tryptic digest. Fragments of the digest can be searched in an online database for tentative identification of the unknown protein and then followed by comparison to authentic reference materials. LC fractionation or molecular weight cutoff filtration was used for preparation of the intact toxin before analysis. Extracts from two types of castor beans were prepared using a terrorist handbook procedure and determined to contain 1% ricin. Additionally, a forensic sample suspected to contain ricin was analyzed using the presented identification scheme (data not shown). The identification of the alkaloid ricinine by GC/MS and LC/MS was shown to be a complementary technique for the determination of castor bean extracts.

Topical application of the synthetic triterpenoid RTA 408 activates Nrf2 and induces cytoprotective genes in rat skin.

Science.gov (United States)

Reisman, Scott A; Lee, Chun-Yue I; Meyer, Colin J; Proksch, Joel W; Ward, Keith W

2014-07-01

RTA 408 is a member of the synthetic oleanane triterpenoid class of compounds known to potently activate the cytoprotective transcription factor Nrf2. Because skin is constantly exposed to external oxidative stress, such as that from ultraviolet radiation, from chemical exposure, during improper wound healing, and throughout the course of cancer radiation therapy, it may benefit from activation of Nrf2. This study was conducted to evaluate the transdermal penetration properties and Nrf2 activation potential of RTA 408 in normal rat skin. RTA 408 (0.1, 1.0, or 3.0%) was applied topically to the shaved skin of male Sprague-Dawley rats twice daily for 4 days and once on Day 5. Topical application of RTA 408 resulted in transdermal penetration, with low but dose-dependent plasma exposure with AUC(0-24 h) values of 3.6, 26.0, and 41.1 h ng/mL for the 0.1, 1.0, and 3.0% doses, respectively. Further, topical application of RTA 408 resulted in increased translocation of Nrf2 to the nucleus, dose-dependent mRNA induction of Nrf2 target genes (e.g. Nqo1, Srxn1, Gclc, and Gclm), and induction of the protein expression of the prototypical Nrf2 target gene Nqo1 and increased total glutathione (GSH) in normal rat skin. Immunohistochemistry demonstrated that increased staining for Nqo1 and total GSH of structures in both the epidermis and dermis was consistent with the full transdermal penetration of RTA 408. Finally, topically administered RTA 408 was well tolerated with no adverse in-life observations and normal skin histology. Thus, the data support the further development of RTA 408 for the potential treatment of skin diseases.

Evaluation of Handheld Assays for the Detection of Ricin and Staphylococcal Enterotoxin B in Disinfected Waters

Directory of Open Access Journals (Sweden)

Mary Margaret Wade

2011-01-01

Full Text Available Development of a rapid field test is needed capable of determining if field supplies of water are safe to drink by the warfighter during a military operation. The present study sought to assess the effectiveness of handheld assays (HHAs in detecting ricin and Staphylococcal Enterotoxin B (SEB in water. Performance of HHAs was evaluated in formulated tap water with and without chlorine, reverse osmosis water (RO with chlorine, and RO with bromine. Each matrix was prepared, spiked with ricin or SEB at multiple concentrations, and then loaded onto HHAs. HHAs were allowed to develop and then read visually. Limits of detection (LOD were determined for all HHAs in each water type. Both ricin and SEB were detected by HHAs in formulated tap water at or below the suggested health effect levels of 455 ng/mL and 4.55 ng/mL, respectively. However, in brominated or chlorinated waters, LODs for SEB increased to approximately 2,500 ng/mL. LODs for ricin increased in chlorinated water, but still remained below the suggested health effect level. In brominated water, the LOD for ricin increased to approximately 2,500 ng/mL. In conclusion, the HHAs tested were less effective at detecting ricin and SEB in disinfected water, as currently configured.

Single domain antibody–quantum dot conjugates for ricin detection by both fluoroimmunoassay and surface plasmon resonance

Energy Technology Data Exchange (ETDEWEB)

Anderson, George P. [Center for Bio/Molecular Science and Engineering, Code 6900, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States); Glaven, Richard H. [Nova Research, Inc., 1900 Elkin Street, Suite 230, Alexandria, VA 22308 (United States); Algar, W. Russ [Center for Bio/Molecular Science and Engineering, Code 6900, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States); College of Science, George Mason University, Fairfax, VA 22030 (United States); Susumu, Kimihiro [Optical Sciences Division, Code 5600, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States); Sotera Defense Solutions, Annapolis Junction, MD 20701 (United States); Stewart, Michael H. [Optical Sciences Division, Code 5600, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States); Medintz, Igor L. [Center for Bio/Molecular Science and Engineering, Code 6900, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States); Goldman, Ellen R., E-mail: ellen.goldman@nrl.navy.mil [Center for Bio/Molecular Science and Engineering, Code 6900, U. S. Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 (United States)

2013-07-05

Graphical abstract: -- Highlights: •Anti-ricin single domain antibodies (sdAb) were self-assembled on quantum dots (QDs). •Conjugates were prepared using dihydrolipoic acid-capped CdSe–ZnS core–shell QDs. •The sdAb–QD conjugates functioned in fluoroimmunoassays for ricin detection. •The conjugates provided signal amplification in surface plasmon resonance assays. •Conjugates provided sensitive detection compared to unconjugated sdAb reporters. -- Abstract: The combination of stable biorecognition elements and robust quantum dots (QDs) has the potential to yield highly effective reporters for bioanalyses. Llama-derived single domain antibodies (sdAb) provide small thermostable recognition elements that can be easily manipulated using standard DNA methods. The sdAb was self-assembled on dihydrolipoic acid (DHLA) ligand-capped CdSe–ZnS core–shell QDs made in our laboratory through the polyhistidine tail of the protein, which coordinated to zinc ions on the QD surface. The sdAb–QD bioconjugates were then applied in both fluorometric and surface plasmon resonance (SPR) immunoassays for the detection of ricin, a potential biothreat agent. The sdAb–QD conjugates functioned in fluoroimmunoassays for the detection of ricin, providing equivalent limits of detection when compared to the same anti-ricin sdAb labeled with a conventional fluorophore. In addition, the DHLA-QD–sdAb conjugates were very effective reporter elements in SPR sandwich assays, providing more sensitive detection with a signal enhancement of ∼10-fold over sdAb reporters and 2–4 fold over full sized antibody reporters. Commercially prepared streptavidin-modified polymer-coated QDs also amplified the SPR signal for the detection of ricin when applied to locations where biotinylated anti-ricin sdAb was bound to target; however, we observed a 4-fold greater amplification when using the DHLA-QD–sdAb conjugates in this format.

Single domain antibody–quantum dot conjugates for ricin detection by both fluoroimmunoassay and surface plasmon resonance

International Nuclear Information System (INIS)

Anderson, George P.; Glaven, Richard H.; Algar, W. Russ; Susumu, Kimihiro; Stewart, Michael H.; Medintz, Igor L.; Goldman, Ellen R.

2013-01-01

Graphical abstract: -- Highlights: •Anti-ricin single domain antibodies (sdAb) were self-assembled on quantum dots (QDs). •Conjugates were prepared using dihydrolipoic acid-capped CdSe–ZnS core–shell QDs. •The sdAb–QD conjugates functioned in fluoroimmunoassays for ricin detection. •The conjugates provided signal amplification in surface plasmon resonance assays. •Conjugates provided sensitive detection compared to unconjugated sdAb reporters. -- Abstract: The combination of stable biorecognition elements and robust quantum dots (QDs) has the potential to yield highly effective reporters for bioanalyses. Llama-derived single domain antibodies (sdAb) provide small thermostable recognition elements that can be easily manipulated using standard DNA methods. The sdAb was self-assembled on dihydrolipoic acid (DHLA) ligand-capped CdSe–ZnS core–shell QDs made in our laboratory through the polyhistidine tail of the protein, which coordinated to zinc ions on the QD surface. The sdAb–QD bioconjugates were then applied in both fluorometric and surface plasmon resonance (SPR) immunoassays for the detection of ricin, a potential biothreat agent. The sdAb–QD conjugates functioned in fluoroimmunoassays for the detection of ricin, providing equivalent limits of detection when compared to the same anti-ricin sdAb labeled with a conventional fluorophore. In addition, the DHLA-QD–sdAb conjugates were very effective reporter elements in SPR sandwich assays, providing more sensitive detection with a signal enhancement of ∼10-fold over sdAb reporters and 2–4 fold over full sized antibody reporters. Commercially prepared streptavidin-modified polymer-coated QDs also amplified the SPR signal for the detection of ricin when applied to locations where biotinylated anti-ricin sdAb was bound to target; however, we observed a 4-fold greater amplification when using the DHLA-QD–sdAb conjugates in this format

The virion-associated open reading frame 49 of murine gammaherpesvirus 68 promotes viral replication both in vitro and in vivo as a derepressor of RTA.

Science.gov (United States)

Noh, Cheol-Woo; Cho, Hye-Jeong; Kang, Hye-Ri; Jin, Hyun Yong; Lee, Shaoying; Deng, Hongyu; Wu, Ting-Ting; Arumugaswami, Vaithilingaraja; Sun, Ren; Song, Moon Jung

2012-01-01

Replication and transcription activator (RTA), an immediate-early gene, is a key molecular switch to evoke lytic replication of gammaherpesviruses. Open reading frame 49 (ORF49) is conserved among gammaherpesviruses and shown to cooperate with RTA in regulating virus lytic replication. Here we show a molecular mechanism and in vivo functions of murine gammaherpesvirus 68 (MHV-68 or γHV-68) ORF49. MHV-68 ORF49 was transcribed and translated as a late gene. The ORF49 protein was associated with a virion, interacting with the ORF64 large tegument protein and the ORF25 capsid protein. Moreover, ORF49 directly bound to RTA and its negative cellular regulator, poly(ADP-ribose) polymerase-1 (PARP-1), and disrupted the interactions of RTA and PARP-1. Productive replication of an ORF49-deficient mutant virus (49S) was attenuated in vivo as well as in vitro. Likewise, latent infection was also impaired in the spleen of 49S-infected mice. Taken together, our results suggest that the virion-associated ORF49 protein may promote virus replication both in vitro and in vivo by providing an optimal environment in the early phase of virus infection as a derepressor of RTA.

Differentiation of ricin using rapd markers

International Nuclear Information System (INIS)

Vivodik, M.; Balazova, Z.

2015-01-01

The aim of this study was to assess genetic diversity within the set of 111 ricin genotypes using 13 RAPD primers. For differentiation of 111 ricin genotypes 13 RAPD primers were used. Amplification of genomic DNA of 111 genotypes using RAPD analysis yielded 102 fragments, with an average of 7.85 polymorphic fragments per primer. Number of amplified fragments with RAPD primers ranged from 3 to 13, with the size of amplicons ranging from 100 to 1500 bp. The polymorphism information content (PIC) value ranged from 0.491 to 0.898 with an average of 0.764 and diversity index (DI) value ranged from 0.576 to 0.900 with an average of 0.776. The dendrogram based on hierarchical cluster analysis using UPGMA algorithm was prepared. In dendrogram separated unique genotype RM-32 from other 110 genotypes which were further grouped into 3 subclusters (1, 2, 3). Only four genotypes were not distinguished. Using more polymorphic RAPD markers genetically close genotypes can be distinguished. Knowledge on the genetic diversity of castor can be used for future breeding programs for increased oil production to meet the ever increasing demand of castor oil for industrial uses as well as for biodiesel production. (author)

Crystallization and preliminary X-ray diffraction data of an LNA 7-mer duplex derived from a ricin aptamer

International Nuclear Information System (INIS)

Förster, Charlotte; Oberthuer, Dominik; Gao, Jiang; Eichert, André; Quast, Frederick G.; Betzel, Christian; Nitsche, Andreas; Erdmann, Volker A.; Fürste, Jens P.

2009-01-01

An all-LNA duplex was designed from the stem region of an RNA aptamer which has been generated against ricin. The LNA duplex was crystallized and preliminary X-ray diffraction analysis revealed diffraction to a resolution of up to 2.8 Å. Locked nucleic acids (LNAs) are modified nucleic acids which contain a modified sugar such as β-d-2′-O,4′-C methylene-bridged ribofuranose or other sugar derivatives in LNA analogues. The β-d-2′-O,4′-C methylene ribofuranose LNAs in particular possess high stability and melting temperatures, which makes them of interest for stabilizing the structure of different nucleic acids. Aptamers, which are DNAs or RNAs targeted against specific ligands, are candidates for substitution with LNAs in order to increase their stability. A 7-mer helix derived from the terminal part of an aptamer that was targeted against ricin was chosen. The ricin aptamer originally consisted of natural RNA building blocks and showed high affinity in ricin binding. For future stabilization of the aptamer, the terminal helix has been constructed as an ‘all-locked’ LNA and was successfully crystallized in order to investigate its structural properties. Optimization of crystal growth succeeded by the use of different metal salts as additives, such as CuCl 2 , MgCl 2 , MnCl 2 , CaCl 2 , CoCl 2 and ZnSO 4 . Preliminary X-ray diffraction data were collected and processed to 2.8 Å resolution. The LNA crystallized in space group P6 5 , with unit-cell parameters a = 50.11, b = 50.11, c = 40.72 Å. The crystals contained one LNA helix per asymmetric unit with a Matthews coefficient of 3.17 Å 3 Da −1 , which implies a solvent content of 70.15%

Application of Microwave Irradiation and Heat to Improve Gliadin Detection and Ricin ELISA Throughput with Food Samples

Directory of Open Access Journals (Sweden)

Eric A. E. Garber

2015-06-01

Full Text Available The utility of microwave irradiation to accelerate the onset of equilibrium and improve ELISA performance was examined using ELISAs for the detection of the plant toxin ricin and gliadin. The ricin ELISA normally requires several one hour incubations at 37 °C, a total assay time of approximately five hours, and employs a complex buffer containing PBS, Tween-20®, and non-fat milk. Different energy levels and pulse designs were compared to the use of abbreviated incubation times at 37 °C for the detection of ricin in food. The use of microwave irradiation had no significant advantage over the application of heat using an oven incubator and performed worse with some foods. In contrast, a gliadin ELISA that relied on 30 min incubation steps at room temperature and a salt-based buffer performed better upon irradiation but also displayed improvement upon incubating the microtiter plate at 37 °C. Whether microwave irradiation was advantageous compared to incubation in an oven was inconclusive. However, by abbreviating the incubation time of the ricin ELISA, it was possible to cut the assay time to less than 2 hours and still display LOD values < 10 ppb and recoveries of 78%–98%.

Produção de anticorpos policlonais anti-ricina Production of polyclonal anti-ricin antibodies

Directory of Open Access Journals (Sweden)

Roselayne Ferro Furtado

2011-02-01

Full Text Available A ricina é uma proteína bastante tóxica presente nas sementes de mamona que impossibilita o uso da torta de mamona "in natura", como ração. A torta de mamona destoxificada necessita ainda de métodos de análise que garantam a ausência de traços dessa proteína. Objetivou-se, neste trabalho, produzir e avaliar a sensibilidade e especificidade de anticorpos policlonais anti-ricina, para serem empregados como possíveis componentes de métodos sorológicos na detecção de ricina em torta de mamona destoxificada. Foram avaliadas três doses da proteína: 400, 180 e 100 µg cada uma dividida em duas aplicações em coelhos. A primeira dose foi injetada no animal no início do experimento e a segunda após 21 dias. O método de ELISA indicou que as duas doses menores (100 e 180 µg induziram respostas imunológicas primária e secundária com produção de anticorpos específicos. Enquanto a dose maior (400 µg de ricina apresentou uma resposta primária com elevação dos títulos de anticorpos, seguida de uma supressão da resposta. Esse perfil é sugestivo de tolerância imunológica. Pela técnica de Western blotting verificou-se que os anticorpos policlonais produzidos são bastante específicos para a ricina, no entanto, por detectarem ricina na forma nativa e desnaturada não são recomendados para o monitoramento de ricina em torta de mamona destoxificada por tratamento térmico.Ricin is a very toxic protein found in castor bean plants, making it impossible to use natural castor cake as animal food. The detoxificated castor cake needs to be analyzed by methods that ensure the absence of traces of this protein. This work had the objective to produce and to evaluate the sensitivity and specificity of anti-ricin polyclonal antibodies, to be employed as component of sorologic methods as the ELISA in the detection of ricin in detoxificated castor cake. Three doses of protein, 400, 180 and 100 µg were evaluated each one injected twice into

Production and Characterization of an Avian Ricin Antitoxin

Science.gov (United States)

1992-01-15

naturally -occurring plant and/or bacterial toxins as biological threat agents, effective antitoxins are needed for either piophylactic or causal...system, an avian antitoxin against the potent phytotoxin , ricin. will be developed and evaluated. The production of therapeutic antibodies in avian...Dynatech). PolyacrylmIde gel electrophoresis (PAGE): Acrylamide gels were prepared according to methods described by Laemmli ( Nature . 227. 1970) and

The novel triterpenoid RTA 408 protects human retinal pigment epithelial cells against H2O2-induced cell injury via NF-E2-related factor 2 (Nrf2 activation

Directory of Open Access Journals (Sweden)

Xiaobin Liu

2016-08-01

Full Text Available Oxidative stress-induced retinal pigment epithelial (RPE cell damage is an important factor in the pathogenesis of age-related macular degeneration (AMD. Previous studies have shown that RTA 408, a synthetic triterpenoid compound, potently activates Nrf2. This study aimed to investigate the protective effects of RTA 408 in cultured RPE cells during oxidative stress and to determine the effects of RTA 408 on Nrf2 and its downstream target genes. Primary human RPE cells were pretreated with RTA 408 and then incubated in 200 μM H2O2 for 6 h. Cell viability was measured with the WST-8 assay. Apoptosis was quantitatively measured by annexin V/propidium iodide (PI double staining and Hoechst 33342 fluorescent staining. Reduced (GSH and oxidized glutathione (GSSG were measured using colorimetric assays. Nrf2 activation and its downstream effects on phase II enzymes were examined by Western blot. Treatment of RPE cells with nanomolar ranges (10 and 100 nM of RTA 408 markedly attenuated H2O2-induced viability loss and apoptosis. RTA 408 pretreatment significantly protected cells from oxidative stress-induced GSH loss, GSSG formation and decreased ROS production. RTA 408 activated Nrf2 and increased the expression of its downstream genes, such as HO-1, NQO1, SOD2, catalase, Grx1, and Trx1. Consequently, the enzyme activities of NQO1, Grx1, and Trx1 were fully protected by RTA 408 pretreatment under oxidative stress. Moreover, knockdown of Nrf2 by siRNA significantly reduced the cytoprotective effects of RTA 408. In conclusion, our data suggest that RTA 408 protect primary human RPE cells from oxidative stress-induced damage by activating Nrf2 and its downstream genes.

Relativistic Klystron Two-Beam Accelerator studies at the RTA test facility

International Nuclear Information System (INIS)

Westenskow, G.A.; Houck, T.L.; Anderson, D.

1996-01-01

A prototype rf power source based on the Relativistic Klystron Two- Beam Accelerator (RK-TBA) concept is being constructed at LBNL to study physics, engineering, and costing issues. The prototype, called RTA, is described and compared to a full scale design appropriate for driving the Next Linear Collider. Specific details of the induction core test and pulsed power system are presented. Details of the 1-MeV, 1.2-kA induction gun currently under construction are described

Developing a precise questionnaire to elucidate risk factors and injury pattern in RTA victims

Directory of Open Access Journals (Sweden)

RK Singh

2013-12-01

Full Text Available Introduction: Road traffic injuries are a growing public health issue. Despite good numbers of traffic legislations/ law/bye-laws/ regulations/ policies at the national/ state level and various safety measures to prevent road accidents/ mishaps, awareness remains comparatively low in India. Till date no questionnaire has been suitably developed, standardized and positivised for determining association of causality with injury pattern and severity score. Objective: To design and develop a précised survey questionnaire determining association of causality with injury pattern along with severity score in RTA victims.  Methodology: Till date no such study has been ventured which has observed the inter relationship of these factors resulting in a specific injury. Designed questionnaire was based on literature review, and updated several times to ensure the precision and agreement with the help of institutional trauma expert team. As a pilot study, 30 RTA victims admitted in trauma centre of KG Medical University were enrolled and designed questionnaire was tested for easiness and doubts. The results were thoroughly analyzed for item difficulty, precision and internal consistency. Results: A significant agreement of question pertaining to speed (k=0.99, CI=0.95, visibility (k=0.87, alcohol (k=0.65 in the questionnaire. Questions related to environment, driver, vehicle and road factors show a significant consistency (p>0.05 as cause of accidents. Test of agreements done by Kappa showed in variables having value more than 0.60 except few variables. Discussion: The designed questionnaire is precise, reasonably reliable in perfect agreement. This questionnaire should emerge a useful tool in determining the association of risk factors with injury pattern and severity. 

Criblage in vitro des graines d'accessions locales de ricin ( Ricinus ...

African Journals Online (AJOL)

Le ricin (Ricinus communis L.) est une plante peu exigeante dont la culture offre d'énormes potentialités économiques pour les exploitants agricoles sénégalais. L'identification de génotypes performants avec des rendements acceptables en conditions de stress salin constitue une des solutions pour promouvoir cette ...

Data Set for the manuscript entitled, "Sample Processing Approach for Detection of Ricin in Surface Samples."

Data.gov (United States)

U.S. Environmental Protection Agency — Figure. This dataset is associated with the following publication: Shah, S., S. Kane, A.M. Erler, and T. Alfaro. Sample Processing Approach for Detection of Ricin in...

Developing a Model for Forecasting Road Traffic Accident (RTA) Fatalities in Yemen

Science.gov (United States)

Karim, Fareed M. A.; Abdo Saleh, Ali; Taijoobux, Aref; Ševrović, Marko

2017-12-01

The aim of this paper is to develop a model for forecasting RTA fatalities in Yemen. The yearly fatalities was modeled as the dependent variable, while the number of independent variables included the population, number of vehicles, GNP, GDP and Real GDP per capita. It was determined that all these variables are highly correlated with the correlation coefficient (r ≈ 0.9); in order to avoid multicollinearity in the model, a single variable with the highest r value was selected (real GDP per capita). A simple regression model was developed; the model was very good (R2=0.916); however, the residuals were serially correlated. The Prais-Winsten procedure was used to overcome this violation of the regression assumption. The data for a 20-year period from 1991-2010 were analyzed to build the model; the model was validated by using data for the years 2011-2013; the historical fit for the period 1991 - 2011 was very good. Also, the validation for 2011-2013 proved accurate.

Development of a bioassay to quantify the ricin toxin content of castor bean (Ricinus communis L. seeds=Desenvolvimento de um bioensaio para quantificar o teor da toxina ricina em sementes de mamona (Ricinus communis L.

Directory of Open Access Journals (Sweden)

Dick Auld

2012-10-01

Full Text Available In this study, we developed a bioassay to quantify the ricin toxin content of castor bean seeds. Existing quantification methods do not always reflect actual toxicity of the seeds analyzed, which may present lower ricin content even though they are more toxic than seeds presenting a higher content of ricin. This is because these methods actually measure the addition of ricin RCA, which is a compound less toxic than pure ricin. We decided to use in this study, the nematode Caenorhabditis elegans, which has been widely used by the pharmaceutical industry. We tested two strains of C. elegans using different methods in 8 experiments. We examined 4 methods of extracting the ricin complex and 3 methods of exposing the nematodes. Among the nematode strains and ricin extraction methods tested, we concluded that the best strain for testing ricin toxicity was the strain called N2 and that the best method for ricin extraction was a rotating bath followed by centrifugation and exposing the nematodes in 24 well plates with a solution of nematodes extracted from the media with destilated waterexposing the nematodes in 24-well plates This method is inexpensive, quick and adequate for the selection of offspring with lower RIP content.Foi desenvolvido um bioensaio para quantificar o teor de ricina nas sementes de mamona. Os métodos de quantificação existentes não refletem a toxidez real das sementes analizadas, que pode mostrar um resultado de menor teor de ricina e ainda assim ser mais toxico do que as sementes que apresentaram teores maiores. Isto ocorre por que estes métodos medem alem da ricina a RCA, que é um composto menos tóxico que a ricina pura. Foi decidido utilizar neste estudo o nematoide Caenorhabditis elegans, que tem sido amplamente utilizado na industria farmacêutica. Foram testadas duas estirpes de C.elegans usadas em diferentes métodos contando com 8 experimentos distintos. nós examinamos 4 métodos de extração de ricina e 3 m

Patients with alcohol use disorder: initial results from a prospective multicenter registry in the Spanish Network on Addiction Disorders. CohRTA Study.

Science.gov (United States)

Sanvisens, Arantza; Zuluaga, Paola; Rivas, Inmaculada; Rubio, Gabriel; Gual, Antoni; Torrens, Marta; Short, Antoni; Álvarez, Francisco Javier; Tor, Jordi; Farré, Magí; Rodríguez de Fonseca, Fernando; Muga, Roberto

2017-07-14

The Alcohol Program of the Spanish Network on Addictive Disorders-RTA requires a longitudinal study to address different research questions related to alcoholism. The cohort study (CohRTA) focuses on patients seeking treatment for alcohol use disorder, as a multicentre, collaborative research project aimed to improve secondary prevention and early diagnosis of pathological processes associated with the disorder. multicentre cohort study in adults (>18 years) seeking their first treatment of the disorder. Patients sign an informed consent and data is collected in an online platform specifically designed for the study; patients are also requested to provide biological samples that are stored in a biobank. Baseline and prospective, socio-demographic, epidemiological, clinical and treatment data are collected. Currently there are 10 participating centres that expect to recruit more than 1,000 patients. As of December 2015, 344 patients (77% men) were included. Median age at admission was 50 years (IQR: 43-55 years). Median age at the start of alcohol consumption was 15 years (IQR: 14-18 years) and 61% of cases reported antecedents of alcohol use disorder in the family. During the 30 days prior to admission, alcohol consumption amounted to 12.5 SDU/day (IQR: 7.1-20 SDU/day), 72% of the patients were tobacco smokers and 30% currently used cocaine. Organising an open cohort of patients with alcohol use disorder may be crucial to better understand the clinical consequences of alcoholism in Spain. This cohort may potentiate quantitative and qualitative research within the Spanish Network on Addictive Disorders-RTA/RETICS. Having a well-established, representative cohort of patients will increase translational research on consequences of alcoholism in our country.

Developing a Model for Forecasting Road Traffic Accident (RTA Fatalities in Yemen

Directory of Open Access Journals (Sweden)

Karim Fareed M. A.

2017-12-01

Full Text Available The aim of this paper is to develop a model for forecasting RTA fatalities in Yemen. The yearly fatalities was modeled as the dependent variable, while the number of independent variables included the population, number of vehicles, GNP, GDP and Real GDP per capita. It was determined that all these variables are highly correlated with the correlation coefficient (r ≈ 0.9; in order to avoid multicollinearity in the model, a single variable with the highest r value was selected (real GDP per capita. A simple regression model was developed; the model was very good (R2=0.916; however, the residuals were serially correlated. The Prais-Winsten procedure was used to overcome this violation of the regression assumption. The data for a 20-year period from 1991-2010 were analyzed to build the model; the model was validated by using data for the years 2011-2013; the historical fit for the period 1991 - 2011 was very good. Also, the validation for 2011-2013 proved accurate.

The yearly rate of Relative Thalamic Atrophy (yrRTA: a simple 2D/3D method for estimating deep gray matter atrophy in Multiple Sclerosis

Directory of Open Access Journals (Sweden)

Manuel eMenéndez-González

2014-08-01

Full Text Available Despite a strong correlation to outcome, the measurement of gray matter (GM atrophy is not being used in daily clinical practice as a prognostic factor and monitor the effect of treatments in Multiple Sclerosis (MS. This is mainly because the volumetric methods available to date are sophisticated and difficult to implement for routine use in most hospitals. In addition, the meaning of raw results from volumetric studies on regions of interest are not always easy to understand. Thus, there is a huge need of a methodology suitable to be applied in daily clinical practice in order to estimate GM atrophy in a convenient and comprehensive way. Given the thalamus is the brain structure found to be more consistently implied in MS both in terms of extent of atrophy and in terms of prognostic value, we propose a solution based in this structure. In particular, we propose to compare the extent of thalamus atrophy (TA with the extent of unspecific, global brain atrophy, represented by ventricular enlargement. We name this ratio the yearly rate of Relative Thalamic Atrophy (yrRTA. In this report we aim to describe the concept of yrRTA and the guidelines for computing it under 2D and 3D approaches and explain the rationale behind this method. We have also conducted a very short crossectional retrospective study to proof the concept of yrRTA. However, we do not seek to describe here the validity of this parameter since these researches are being conducted currently and results will be addressed in future publications.

The yearly rate of Relative Thalamic Atrophy (yrRTA): a simple 2D/3D method for estimating deep gray matter atrophy in Multiple Sclerosis.

Science.gov (United States)

Menéndez-González, Manuel; Salas-Pacheco, José M; Arias-Carrión, Oscar

2014-01-01

Despite a strong correlation to outcome, the measurement of gray matter (GM) atrophy is not being used in daily clinical practice as a prognostic factor and monitor the effect of treatments in Multiple Sclerosis (MS). This is mainly because the volumetric methods available to date are sophisticated and difficult to implement for routine use in most hospitals. In addition, the meanings of raw results from volumetric studies on regions of interest are not always easy to understand. Thus, there is a huge need of a methodology suitable to be applied in daily clinical practice in order to estimate GM atrophy in a convenient and comprehensive way. Given the thalamus is the brain structure found to be more consistently implied in MS both in terms of extent of atrophy and in terms of prognostic value, we propose a solution based in this structure. In particular, we propose to compare the extent of thalamus atrophy with the extent of unspecific, global brain atrophy, represented by ventricular enlargement. We name this ratio the "yearly rate of Relative Thalamic Atrophy" (yrRTA). In this report we aim to describe the concept of yrRTA and the guidelines for computing it under 2D and 3D approaches and explain the rationale behind this method. We have also conducted a very short crossectional retrospective study to proof the concept of yrRTA. However, we do not seek to describe here the validity of this parameter since these researches are being conducted currently and results will be addressed in future publications.

NAČRT TRŽENJA ROMANTIČNEGA HOTELA RENESANSE KOT DEL POSLOVNEGA NAČRTA

OpenAIRE

Božič, Tanja

2010-01-01

V diplomskem delu smo oblikovali marketinški načrt romantičnega hotela Renesanse. V prvem delu diplomskega dela proučujemo teoretična izhodišča v povezavi z marketinškim načrtom. Pojasnili smo integralno vlogo marketinškega načrta v poslovnem načrtu podjetja. Opredelili smo ga kot pot, načine, možnosti za doseganje načrtovane prodaje podjetniških učinkov (izdelkov in/ali storitev). V drugem, praktičnem delu diplomskega dela predstavljamo celostno marketinško strategijo hotela Renesan...

A STUDY ON PATTERN OF INJURIES FOLLOWING RTA

Directory of Open Access Journals (Sweden)

Jiju George

2016-09-01

Full Text Available BACKGROUND Around three lakh accidents occur in India every year injuring upto 3,40,000 people. Injuries to the pedestrian occur as a result of acceleration process. There can be an abrasion, contusion, laceration or fracture. Injuries can be grouped as  Primary Impact Injuries: This is the first contact of vehicle over the victim’s body. It can be an abrasion or contusion and may bear the design of the part of vehicle which struck the victim. The part of the body involved depends upon the position of the victim or the dimension of the offending vehicle.  Secondary Impact Injuries: Following the primary impact the victim can be scooped up and the vehicle can impact over other parts of his body producing injuries.  Secondary Injuries: These occur when the victim is knocked down following impact. These injuries are as a result of the victim striking the ground or any other intervening object.  Crush Injuries: these are seen when the victim is run over by the vehicle. The severity depends upon the weight of the vehicle. 2 In this study a sincere effort has been put to study the different types of injuries produced in a victim of road traffic accident. This study is intended to help the fellow orthopaedicians to identify quickly and act accordingly and thus prevent the consequences. MATERIALS AND METHODS  The present study was done in the Department of Orthopaedics, Travancore Medical College at Kollam.  The present study was done from March 2015 to march 2016.  A total of 196 cases of RTA were admitted in our hospital during the study period.  Gender distribution, age distribution, type of road user, time of the day when accidents occurred, part of the body injured, types of fracture and injuries sustained that followed was checked.  Detailed clinical history and examination was done and simultaneously noted. INCLUSION CRITERIA Nonfatal injuries was taken up for the study. EXCLUSION CRITERIA Patients who succumbed to

Electrochemical Aptamer Scaffold Biosensors for Detection of Botulism and Ricin Proteins.

Science.gov (United States)

Daniel, Jessica; Fetter, Lisa; Jett, Susan; Rowland, Teisha J; Bonham, Andrew J

2017-01-01

Electrochemical DNA (E-DNA) biosensors enable the detection and quantification of a variety of molecular targets, including oligonucleotides, small molecules, heavy metals, antibodies, and proteins. Here we describe the design, electrode preparation and sensor attachment, and voltammetry conditions needed to generate and perform measurements using E-DNA biosensors against two protein targets, the biological toxins ricin and botulinum neurotoxin. This method can be applied to generate E-DNA biosensors for the detection of many other protein targets, with potential advantages over other systems including sensitive detection limits typically in the nanomolar range, real-time monitoring, and reusable biosensors.

Expression and immunogenicity of M2e peptide of avian influenza virus H5N1 fused to ricin toxin B chain produced in duckweed plants

Science.gov (United States)

Firsov, Aleksey; Tarasenko, Irina; Mitiouchkina, Tatiana; Shaloiko, Lyubov; Kozlov, Oleg; Vinokurov, Leonid; Rasskazova, Ekaterina; Murashev, Arkadii; Vainstein, Alexander; Dolgov, Sergey

2018-02-01

The amino acid sequence of the extracellular domain of the virus-encoded M2 matrix protein (peptide M2e) is conserved among all subtypes of influenza A strains, enabling the development of a broad-range vaccine against them. We expressed M2e from avian influenza virus A/chicken/Kurgan/5/2005 (H5N1) in nuclear-transformed duckweed plants for further development of an avian influenza vaccine. The 30-amino acid N-terminal fragment of M2, including M2e (denoted M130), was selected for expression. The M2e DNA sequence fused in-frame to the 3’ end of ricin toxin B chain (RTB) was cloned under control of the CaMV 35S promoter into pBI121. The resulting plasmid was used for duckweed transformation, and 23 independent transgenic duckweed lines were obtained. Asialofetuin-binding ELISA of protein samples from the transgenic plants using polyclonal anti-RTB antibodies confirmed the expression of the RTB–M130 fusion protein in 20 lines. Quantitative ELISA of crude protein extracts from these lines showed RTB–M130 accumulation ranging from 0.25–2.5 µg/g fresh weight (0.0006–0.01% of total soluble protein). Affinity chromatography with immobilized asialofetuin and western blot analysis of protein samples from the transgenic plants showed expression of fusion protein RTB–M130 in the dimeric form with a molecular mass of about 70 kDa. Mice were immunized orally with a preparation of total soluble protein from transgenic plants, receiving four doses of 7 μg duckweed-derived RTB–M130 each, with no additional adjuvant. Specific IgG against M2e was detected in immunized mice, and the endpoint titer of anti-M2e IgG was 1024. It was confirmed that oral immunization with RTB-M2e induces production of specific antibodies against peptide M2e, one of the most conserved antigens of the influenza virus. These results may provide further information for the development of a duckweed-based expression system to produce a broad-range edible vaccine against avian influenza.

ANALYSIS OF RICIN TOXIN PREPARATIONS FOR CARBOHYDRATE AND FATTY ACID ABUNDANCE AND ISOTOPE RATIO INFORMATION

Energy Technology Data Exchange (ETDEWEB)

Wunschel, David S.; Kreuzer-Martin, Helen W.; Antolick, Kathryn C.; Colburn, Heather A.; Moran, James J.; Melville, Angela M.

2009-12-01

This report describes method development and preliminary evaluation for analyzing castor samples for signatures of purifying ricin. Ricin purification from the source castor seeds is essentially a problem of protein purification using common biochemical methods. Indications of protein purification will likely manifest themselves as removal of the non-protein fractions of the seed. Two major, non-protein, types of biochemical constituents in the seed are the castor oil and various carbohydrates. The oil comprises roughly half the seed weight while the carbohydrate component comprises roughly half of the remaining “mash” left after oil and hull removal. Different castor oil and carbohydrate components can serve as indicators of specific toxin processing steps. Ricinoleic acid is a relatively unique fatty acid in nature and is the most abundant component of castor oil. The loss of ricinoleic acid indicates a step to remove oil from the seeds. The relative amounts of carbohydrates and carbohydrate-like compounds, including arabinose, xylose, myo-inositol fucose, rhamnose, glucosamine and mannose detected in the sample can also indicate specific processing steps. For instance, the differential loss of arabinose relative to mannose and N-acetyl glucosamine indicates enrichment for the protein fraction of the seed using protein precipitation. The methods developed in this project center on fatty acid and carbohydrate extraction from castor samples followed by derivatization to permit analysis by gas chromatography-mass spectrometry (GC-MS). Method descriptions herein include: the source and preparation of castor materials used for method evaluation, the equipment and description of procedure required for chemical derivatization, and the instrument parameters used in the analysis. Two types of derivatization methods describe analysis of carbohydrates and one procedure for analysis of fatty acids. Two types of GC-MS analysis is included in the method development, one

Production and purification of immunologically active core protein p24 from HIV-1 fused to ricin toxin B subunit in E. coli

Directory of Open Access Journals (Sweden)

Gómez-Lim Miguel A

2009-02-01

Full Text Available Abstract Background Gag protein from HIV-1 is a polyprotein of 55 kDa, which, during viral maturation, is cleaved to release matrix p17, core p24 and nucleocapsid proteins. The p24 antigen contains epitopes that prime helper CD4 T-cells, which have been demonstrated to be protective and it can elicit lymphocyte proliferation. Thus, p24 is likely to be an integral part of any multicomponent HIV vaccine. The availability of an optimal adjuvant and carrier to enhance antiviral responses may accelerate the development of a vaccine candidate against HIV. The aim of this study was to investigate the adjuvant-carrier properties of the B ricin subunit (RTB when fused to p24. Results A fusion between ricin toxin B subunit and p24 HIV (RTB/p24 was expressed in E. coli. Affinity chromatography was used for purification of p24 alone and RTB/p24 from cytosolic fractions. Biological activity of RTB/p24 was determined by ELISA and affinity chromatography using the artificial receptor glycoprotein asialofetuin. Both assays have demonstrated that RTB/p24 is able to interact with complex sugars, suggesting that the chimeric protein retains lectin activity. Also, RTB/p24 was demonstrated to be immunologically active in mice. Two weeks after intraperitoneal inoculation with RTB/p24 without an adjuvant, a strong anti-p24 immune response was detected. The levels of the antibodies were comparable to those found in mice immunized with p24 alone in the presence of Freund adjuvant. RTB/p24 inoculated intranasally in mice, also elicited significant immune responses to p24, although the response was not as strong as that obtained in mice immunized with p24 in the presence of the mucosal adjuvant cholera toxin. Conclusion In this work, we report the expression in E. coli of HIV-1 p24 fused to the subunit B of ricin toxin. The high levels of antibodies obtained after intranasal and intraperitoneal immunization of mice demonstrate the adjuvant-carrier properties of RTB when

The medicinal chemistry of botulinum, ricin and anthrax toxins.

Science.gov (United States)

Hicks, Rickey P; Hartell, Mark G; Nichols, Daniel A; Bhattacharjee, Apurba K; van Hamont, John E; Skillman, Donald R

2005-01-01

The potential use of weapons of mass destruction (nuclear, biological or chemical) by terrorist organizations represents a major threat to world peace and safety. Only a limited number of vaccines are available to protect the general population from the medical consequences of these weapons. In addition there are major health concerns associated with a pre-exposure mass vaccination of the general population. To reduce or eliminate the impact of these terrible threats, new drugs must be developed to safely treat individuals exposed to these agents. A review of all therapeutic agents under development for the treatment of the illnesses and injuries that result from exposure to nuclear, biological or chemical warfare agents is beyond the scope of any single article. The intent here is to provide a focused review for medicinal and organic chemists of three widely discussed and easily deployed biological warfare agents, botulinum neurotoxin and ricin toxins and the bacteria Bacillus anthracis. Anthrax will be addressed because of its similarity in both structure and mechanism of catalytic activity with botulinum toxin. The common feature of these three agents is that they exhibit their biological activity via toxin enzymatic hydrolysis of a specific bond in their respective substrate molecules. A brief introduction to the history of each of the biological warfare agents is presented followed by a discussion on the mechanisms of action of each at the molecular level, and a review of current potential inhibitors under investigation.

Identification of the sodium-calcium exchanger as the major ricin-binding glycoprotein of bovine rod outer segments and its localization to the plasma membrane

International Nuclear Information System (INIS)

Reid, D.M.; Molday, R.S.; Friedel, U.; Cook, N.J.

1990-01-01

After neuraminidase treatment the Na + /Ca 2+ exchanger of bovine rod outer segments was found to specifically bind Ricinus communis agglutinin. SDS gel electrophoresis and Western blotting of ricin-binding proteins purified from rod outer segment membranes by lectin affinity chromatography revealed the existence of two major polypeptides of M r 215K and 103K, the former of which was found to specifically react with PMe 1B3, a monoclonal antibody specific for the 230-kDa non-neuraminidase-treated Na + /Ca 2+ exchanger. Reconstitution of the ricin affinity-purified exchanger into calcium-containing liposomes revealed that neuraminidase treatment had no significant effect on the kinetics of Na + /Ca 2+ exchange activation by sodium. The authors further investigated the density of the Na + /Ca 2+ exchanger in disk and plasma membrane preparations using Western blotting, radioimmunoassays, immunoelectron microscopy, and reconstitution procedures. The results indicate that the Na + /Ca 2+ exchanger is localized in the rod photoreceptor plasma membrane and is absent or present in extremely low concentrations in disk membranes, as they have previously shown to be the case for the cGMP-gated cation channel. Previous reports describing the existence of Na + /Ca 2+ exchange activity in rod outer segment disk membrane preparations may be due to the fusion of plasma membrane components and/or the presence of contaminating plasma membrane vesicles

Plant Ribosome-Inactivating Proteins: Progesses, Challenges and Biotechnological Applications (and a Few Digressions

Directory of Open Access Journals (Sweden)

Maria Serena Fabbrini

2017-10-01

Full Text Available Plant ribosome-inactivating protein (RIP toxins are EC3.2.2.22 N-glycosidases, found among most plant species encoded as small gene families, distributed in several tissues being endowed with defensive functions against fungal or viral infections. The two main plant RIP classes include type I (monomeric and type II (dimeric as the prototype ricin holotoxin from Ricinus communis that is composed of a catalytic active A chain linked via a disulphide bridge to a B-lectin domain that mediates efficient endocytosis in eukaryotic cells. Plant RIPs can recognize a universally conserved stem-loop, known as the α-sarcin/ ricin loop or SRL structure in 23S/25S/28S rRNA. By depurinating a single adenine (A4324 in 28S rat rRNA, they can irreversibly arrest protein translation and trigger cell death in the intoxicated mammalian cell. Besides their useful application as potential weapons against infected/tumor cells, ricin was also used in bio-terroristic attacks and, as such, constitutes a major concern. In this review, we aim to summarize past studies and more recent progresses made studying plant RIPs and discuss successful approaches that might help overcoming some of the bottlenecks encountered during the development of their biomedical applications.

Evaluation of monoclonal antibodies for the development of breast cancer immunotoxins

International Nuclear Information System (INIS)

Bjorn, M.J.; Ring, D.; Frankel, A.

1985-01-01

Eighty-five antibodies recognizing breast cancer-selective antigens were conjugated to ricin toxin A-chain using a disulfide linkage. The cytotoxicities of the resulting immunotoxins were determined on breast cancer cells and normal human fibroblasts. Twenty-four antibodies formed immunotoxins that were toxic to at least one breast cancer cell line at concentrations of 10 nM or less but were nontoxic to human fibroblast lines used as negative controls. Some of the breast tumor-selective immunotoxins were as toxic as a conjugate between monoclonal anti-transferrin receptor and ricin toxin A-chain (50% inhibition of cellular protein synthesis at approximately 0.1 nM). Another set of four immunotoxins were indiscriminately toxic to human breast tumor cell lines, two human fibroblast cell lines, and a human lymphoblastoid line. Several of the antibodies the toxin conjugates of which specifically killed breast cancer cell lines may be useful in cancer therapy, since they show a wide range of binding to individual breast tumors and cell lines and a limited range of binding to normal tissue types

Integration of gas chromatography mass spectrometry methods for differentiating ricin preparation methods.

Science.gov (United States)

Wunschel, David S; Melville, Angela M; Ehrhardt, Christopher J; Colburn, Heather A; Victry, Kristin D; Antolick, Kathryn C; Wahl, Jon H; Wahl, Karen L

2012-05-07

The investigation of crimes involving chemical or biological agents is infrequent, but presents unique analytical challenges. The protein toxin ricin is encountered more frequently than other agents and is found in the seeds of Ricinus communis, commonly known as the castor plant. Typically, the toxin is extracted from castor seeds utilizing a variety of different recipes that result in varying purity of the toxin. Moreover, these various purification steps can also leave or differentially remove a variety of exogenous and endogenous residual components with the toxin that may indicate the type and number of purification steps involved. We have applied three gas chromatography-mass spectrometry (GC-MS) based analytical methods to measure the variation in seed carbohydrates and castor oil ricinoleic acid, as well as the presence of solvents used for purification. These methods were applied to the same samples prepared using four previously identified toxin preparation methods, starting from four varieties of castor seeds. The individual data sets for seed carbohydrate profiles, ricinoleic acid, or acetone amount each provided information capable of differentiating different types of toxin preparations across seed types. However, the integration of the data sets using multivariate factor analysis provided a clear distinction of all samples based on the preparation method, independent of the seed source. In particular, the abundance of mannose, arabinose, fucose, ricinoleic acid, and acetone were shown to be important differentiating factors. These complementary tools provide a more confident determination of the method of toxin preparation than would be possible using a single analytical method.

Characterization of a translation inhibitory protein from Luffa aegyptiaca.

Science.gov (United States)

Ramakrishnan, S; Enghlid, J J; Bryant, H L; Xu, F J

1989-04-28

A protein with a molecular weight of about 30,000 was purified from the seeds of Luffa aegyptiaca. This protein inhibited cell free translation at pM concentrations. In spite of functional similarity to other ribosomal inhibitory proteins, the NH2-terminal analysis did not show any significant homology. Competitive inhibition studies indicate no immunological crossreactivity between the inhibitory protein from Luffa aegyptiaca, pokeweed antiviral protein (PAP) and recombinant ricin A chain. Chemical linkage of the protein to a monoclonal antibody reactive to transferrin receptor resulted in a highly cytotoxic conjugate.

Engineered toxins "zymoxins" are activated by the HCV NS3 protease by removal of an inhibitory protein domain.

Directory of Open Access Journals (Sweden)

Assaf Shapira

Full Text Available The synthesis of inactive enzyme precursors, also known as "zymogens," serves as a mechanism for regulating the execution of selected catalytic activities in a desirable time and/or site. Zymogens are usually activated by proteolytic cleavage. Many viruses encode proteases that execute key proteolytic steps of the viral life cycle. Here, we describe a proof of concept for a therapeutic approach to fighting viral infections through eradication of virally infected cells exclusively, thus limiting virus production and spread. Using the hepatitis C virus (HCV as a model, we designed two HCV NS3 protease-activated "zymogenized" chimeric toxins (which we denote "zymoxins". In these recombinant constructs, the bacterial and plant toxins diphtheria toxin A (DTA and Ricin A chain (RTA, respectively, were fused to rationally designed inhibitor peptides/domains via an HCV NS3 protease-cleavable linker. The above toxins were then fused to the binding and translocation domains of Pseudomonas exotoxin A in order to enable translocation into the mammalian cells cytoplasm. We show that these toxins exhibit NS3 cleavage dependent increase in enzymatic activity upon NS3 protease cleavage in vitro. Moreover, a higher level of cytotoxicity was observed when zymoxins were applied to NS3 expressing cells or to HCV infected cells, demonstrating a potential therapeutic window. The increase in toxin activity correlated with NS3 protease activity in the treated cells, thus the therapeutic window was larger in cells expressing recombinant NS3 than in HCV infected cells. This suggests that the "zymoxin" approach may be most appropriate for application to life-threatening acute infections where much higher levels of the activating protease would be expected.

Engineered Toxins “Zymoxins” Are Activated by the HCV NS3 Protease by Removal of an Inhibitory Protein Domain

Science.gov (United States)

Shapira, Assaf; Gal-Tanamy, Meital; Nahary, Limor; Litvak-Greenfeld, Dana; Zemel, Romy; Tur-Kaspa, Ran; Benhar, Itai

2011-01-01

The synthesis of inactive enzyme precursors, also known as “zymogens,” serves as a mechanism for regulating the execution of selected catalytic activities in a desirable time and/or site. Zymogens are usually activated by proteolytic cleavage. Many viruses encode proteases that execute key proteolytic steps of the viral life cycle. Here, we describe a proof of concept for a therapeutic approach to fighting viral infections through eradication of virally infected cells exclusively, thus limiting virus production and spread. Using the hepatitis C virus (HCV) as a model, we designed two HCV NS3 protease-activated “zymogenized” chimeric toxins (which we denote “zymoxins”). In these recombinant constructs, the bacterial and plant toxins diphtheria toxin A (DTA) and Ricin A chain (RTA), respectively, were fused to rationally designed inhibitor peptides/domains via an HCV NS3 protease-cleavable linker. The above toxins were then fused to the binding and translocation domains of Pseudomonas exotoxin A in order to enable translocation into the mammalian cells cytoplasm. We show that these toxins exhibit NS3 cleavage dependent increase in enzymatic activity upon NS3 protease cleavage in vitro. Moreover, a higher level of cytotoxicity was observed when zymoxins were applied to NS3 expressing cells or to HCV infected cells, demonstrating a potential therapeutic window. The increase in toxin activity correlated with NS3 protease activity in the treated cells, thus the therapeutic window was larger in cells expressing recombinant NS3 than in HCV infected cells. This suggests that the “zymoxin” approach may be most appropriate for application to life-threatening acute infections where much higher levels of the activating protease would be expected. PMID:21264238

A viral transcriptional activator of Kaposi's sarcoma-associated herpesvirus (KSHV) induces apoptosis, which is blocked in KSHV-infected cells

International Nuclear Information System (INIS)

Nishimura, Ken; Ueda, Keiji; Sakakibara, Shuhei; Do, Eunju; Ohsaki, Eriko; Okuno, Toshiomi; Yamanishi, Koichi

2003-01-01

Replication and transcription activator (RTA), mostly encoded by Kaposi's sarcoma-associated herpesvirus (KSHV) open reading frame 50, is expressed in the immediate-early phase of reactivation and plays a critical role in inducing the viral lytic cycle in KSHV-infected cells. We established cell clones from BJAB cells and replication-deficient BCBL-1 cells in which KSHV RTA expression was controlled by an inducible promoter of the tetracycline-based Tet-Off expression system. In RTA-inducible BJAB cells, tetracycline removal induced the synthesis of RTA, resulting in cell death. DNA fragmentation, structural changes in the cell membrane, and poly(ADP-ribose) polymerase (PARP) cleavage were observed in the RTA-induced BJAB cells, indicating that RTA expression induced caspase activation and cell death by apoptosis. However, expression of RTA in RTA-inducible BCBL-1 cells did not undergo apoptosis and cell death. These results suggested that KSHV RTA is an apoptosis inducer that is opposed by an antiapoptotic pathway in infected cells

Ribosome-Inactivating Proteins from Plants: A Historical Overview

Directory of Open Access Journals (Sweden)

Andrea Bolognesi

2016-11-01

Full Text Available This review provides a historical overview of the research on plant ribosome-inactivating proteins (RIPs, starting from the first studies at the end of eighteenth century involving the purification of abrin and ricin, as well as the immunological experiments of Paul Erlich. Interest in these plant toxins was revived in 1970 by the observation of their anticancer activity, which has given rise to a large amount of research contributing to the development of various scientific fields. Biochemistry analyses succeeded in identifying the enzymatic activity of RIPs and allowed for a better understanding of the ribosomal machinery. Studies on RIP/cell interactions were able to detail the endocytosis and intracellular routing of ricin, thus increasing our knowledge of how cells handle exogenous proteins. The identification of new RIPs and the finding that most RIPs are single-chain polypeptides, together with their genetic sequencing, has aided in the development of new phylogenetic theories. Overall, the biological properties of these proteins, including their abortifacient, anticancer, antiviral and neurotoxic activities, suggest that RIPs could be utilized in agriculture and in many biomedical fields, including clinical drug development.

Distal renal tubular acidosis and amelogenesis imperfecta: A rare association

Directory of Open Access Journals (Sweden)

P Ravi

2013-01-01

Full Text Available Renal tubular acidosis (RTA is characterized by a normal anion gap with hyperchloremic metabolic acidosis. Primary distal RTA (type I is the most common RTA in children. Childhood presentation of distal RTA includes vomiting, failure to thrive, metabolic acidosis, and hypokalemia. Amelogenesis imperfecta (AI represents a condition where the dental enamel and oral tissues are affected in an equal manner resulting in the hypoplastic or hypopigmented teeth. We report a 10-year-old girl, previously asymptomatic presented with the hypokalemic paralysis and on work-up found out to have type I RTA. The discoloration of teeth and enamel was diagnosed as AI.

Renal Tubular Acidosis Secondary to FK506 in Living Donor Liver Transplantation: A Case Report

Directory of Open Access Journals (Sweden)

Keiko Ogita

2003-10-01

Full Text Available FK506 is an immunosuppressant that is thought to be less nephrotoxic than cyclosporine A. However, complications due to renal tubular acidosis (RTA have recently been reported. We report a case of RTA secondary to FK506 administration in liver transplantation. A 6-month-old girl was treated with FK506 after undergoing living donor liver transplantation for fulminant hepatitis. On postoperative day 17, she demonstrated hyperkalaemia and metabolic acidosis; she was diagnosed to have hyperkalaemic distal RTA with aldosterone deficiency (type IV. Intravenous sodium bicarbonate and furosemide, and intrarectal calcium polystyrenesulfonate were administered to correct the acidosis and promote potassium secretion. Thereafter, the FK506 concentration in whole blood gradually decreased, and the hyperkalaemia and metabolic acidosis following RTA improved. RTA is one type of nephrotoxicity induced by FK506, and it is reversible in mild cases when appropriately treated. The mechanism of RTA induced by FK506 has not yet been clearly elucidated. Surgeons and physicians should therefore be aware of the potential for RTA to occur with FK506 after any organ transplantation. The treatment for acidosis and hyperkalaemia should be started as soon as RTA is diagnosed, and the dosage of FK506 should also be reduced if possible.

A Novel Approach for Identification and Ranking of Road Traffic Accident Hotspots

Directory of Open Access Journals (Sweden)

Zahran El-Said M.M.

2017-01-01

Full Text Available Road Traffic Accidents (RTA are known to be one of the main causes of fatalities worldwide. One usef ul approach to improve road safety is through the identification of RT A hotspots along a road, so they can be prioritised and treated. This paper introduces an approach based on Geographical Information System (GI S to identify and prioritise RTA hotspots along a road network using historical RTA data. One particular urban road in Brunei with a historically high rate of RT As, Jalan Gadong, was selected as a case study. Five years of historical RTA data were acquired from the relevant authorities and input into a GIS database. GI S analysis was then used to identify the spatial extension of the RT A hotspots. The RT A hotspots were ranked according to three different schemes: frequency, severity and socio-economic impact of RTAs. A composite ranking scheme was also developed to combine these schemes; this enabled the prioritisation and development of intervention and maintenance programmes of the identified RTA hotspots. A visualisation method of the RTA spatial distribution within each identified RTA hotspot was also developed to determine the most risky road stretches within each hotspot, which is important for treatment prioritisation when limited resources are available.

Towards a Food Safety Knowledge Base Applicable in Crisis Situations and Beyond.

Science.gov (United States)

Falenski, Alexander; Weiser, Armin A; Thöns, Christian; Appel, Bernd; Käsbohrer, Annemarie; Filter, Matthias

2015-01-01

In case of contamination in the food chain, fast action is required in order to reduce the numbers of affected people. In such situations, being able to predict the fate of agents in foods would help risk assessors and decision makers in assessing the potential effects of a specific contamination event and thus enable them to deduce the appropriate mitigation measures. One efficient strategy supporting this is using model based simulations. However, application in crisis situations requires ready-to-use and easy-to-adapt models to be available from the so-called food safety knowledge bases. Here, we illustrate this concept and its benefits by applying the modular open source software tools PMM-Lab and FoodProcess-Lab. As a fictitious sample scenario, an intentional ricin contamination at a beef salami production facility was modelled. Predictive models describing the inactivation of ricin were reviewed, relevant models were implemented with PMM-Lab, and simulations on residual toxin amounts in the final product were performed with FoodProcess-Lab. Due to the generic and modular modelling concept implemented in these tools, they can be applied to simulate virtually any food safety contamination scenario. Apart from the application in crisis situations, the food safety knowledge base concept will also be useful in food quality and safety investigations.

Eeyarestatin 1 interferes with both retrograde and anterograde intracellular trafficking pathways.

Directory of Open Access Journals (Sweden)

Mina-Olga Aletrari

Full Text Available The small molecule Eeyarestatin I (ESI inhibits the endoplasmic reticulum (ER-cytosol dislocation and subsequent degradation of ERAD (ER associated protein degradation substrates. Toxins such as ricin and Shiga/Shiga-like toxins (SLTx are endocytosed and trafficked to the ER. Their catalytic subunits are thought to utilise ERAD-like mechanisms to dislocate from the ER into the cytosol, where a proportion uncouples from the ERAD process, recovers a catalytic conformation and destroys their cellular targets. We therefore investigated ESI as a potential inhibitor of toxin dislocation.Using cytotoxicity measurements, we found no role for ES(I as an inhibitor of toxin dislocation from the ER, but instead found that for SLTx, ESI treatment of cells was protective by reducing the rate of toxin delivery to the ER. Microscopy of the trafficking of labelled SLTx and its B chain (lacking the toxic A chain showed a delay in its accumulation at a peri-nuclear location, confirmed to be the Golgi by examination of SLTx B chain metabolically labelled in the trans-Golgi cisternae. The drug also reduced the rate of endosomal trafficking of diphtheria toxin, which enters the cytosol from acidified endosomes, and delayed the Golgi-specific glycan modifications and eventual plasma membrane appearance of tsO45 VSV-G protein, a classical marker for anterograde trafficking.ESI acts on one or more components that function during vesicular transport, whilst at least one retrograde trafficking pathway, that of ricin, remains unperturbed.

The triple-A supply chain.

Science.gov (United States)

Lee, Hau L

2004-10-01

Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

Mechanism of the protective effects of the combined treatment with rhynchophylla total alkaloids and sinapine thiocyanate against a prothrombotic state caused by vascular endothelial cell inflammatory damage.

Science.gov (United States)

Li, Yunlun; Zhang, Xinya; Yang, Wenqing; Li, Chao; Chu, Yanjun; Jiang, Haiqiang; Shen, Zhenzhen

2017-06-01

The aim of the present study was to investigate the effect and the underlying mechanism of the combined treatment of rhynchophylla total alkaloids (RTA) and sinapine thiocyanate for protection against a prothrombotic state (PTS) associated with the tumor necrosis factor-alpha (TNF-α)-induced inflammatory injury of vascular endothelial cells (VECs). A TNF-α-induced VEC inflammatory injury model was established, and cell morphology of VECs was evaluated using scanning electron microscopy. In addition, reverse transcription-quantitative polymerase chain reaction and western blot analysis were performed to examine the mRNA and protein expression of coagulation-related factors, including nuclear factor-κB (NF-κB), transforming growth factor-β1 (TGF-β1), tissue factor (TF), plasminogen activator inhibitor (PAI-1), protease-activation receptors (PAR-1) and protein kinase C (PKC-α) in VECs. Combined treatment with RTA and sinapine thiocyanate was demonstrated to reduce, to a varying extent, the mRNA and protein expression of NF-κB, TGF-β1, TF, PAR-1, PKC-α and PAI-1. Furthermore, combined treatment with RTA and sinapine thiocyanate was able to downregulate the expression of coagulation-related factors in injured VECs, thereby inhibiting the PTS induced by vascular endothelial injury. The underlying mechanism is partially associated with the TF-mediated activation of the thrombin-receptor signaling pathway that suppresses coagulation during inflammation and balances fibrinolysis in order to inhibit fibrin generation and deposition.

A Review of the Wood Pellet Value Chain, Modern Value/Supply Chain Management Approaches, and Value/Supply Chain Models

Directory of Open Access Journals (Sweden)

Natalie M. Hughes

2014-01-01

Full Text Available We reviewed 153 peer-reviewed sources to provide identification of modern supply chain management techniques and exploration of supply chain modeling, to offer decision support to managers. Ultimately, the review is intended to assist member-companies of supply chains, mainly producers, improve their current management approaches, by directing them to studies that may be suitable for direct application to their supply chains and value chains for improved efficiency and profitability. We found that information on supply chain management and modeling techniques in general is available. However, few Canadian-based published studies exist regarding a demand-driven modeling approach to value/supply chain management for wood pellet production. Only three papers were found specifically on wood pellet value chain analysis. We propose that more studies should be carried out on the value chain of wood pellet manufacturing, as well as demand-driven management and modeling approaches with improved demand forecasting methods.

Ricinus communis intoxications in human and veterinary medicine-a summary of real cases.

Science.gov (United States)

Worbs, Sylvia; Köhler, Kernt; Pauly, Diana; Avondet, Marc-André; Schaer, Martin; Dorner, Martin B; Dorner, Brigitte G

2011-10-01

Accidental and intended Ricinus communis intoxications in humans and animals have been known for centuries but the causative agent remained elusive until 1888 when Stillmark attributed the toxicity to the lectin ricin. Ricinus communis is grown worldwide on an industrial scale for the production of castor oil. As by-product in castor oil production ricin is mass produced above 1 million tons per year. On the basis of its availability, toxicity, ease of preparation and the current lack of medical countermeasures, ricin has gained attention as potential biological warfare agent. The seeds also contain the less toxic, but highly homologous Ricinus communis agglutinin and the alkaloid ricinine, and especially the latter can be used to track intoxications. After oil extraction and detoxification, the defatted press cake is used as organic fertilizer and as low-value feed. In this context there have been sporadic reports from different countries describing animal intoxications after uptake of obviously insufficiently detoxified fertilizer. Observations in Germany over several years, however, have led us to speculate that the detoxification process is not always performed thoroughly and controlled, calling for international regulations which clearly state a ricin threshold in fertilizer. In this review we summarize knowledge on intended and unintended poisoning with ricin or castor seeds both in humans and animals, with a particular emphasis on intoxications due to improperly detoxified castor bean meal and forensic analysis.

Failure to thrive and nephrocalcinosis due to distal renal tubular acidosis: A rare presentation of pediatric lupus nephritis.

Science.gov (United States)

Nandi, Madhumita; Das, Mrinal Kanti; Nandi, Sukanta

2016-01-01

A 9-year-old female child was initially diagnosed of having nephrocalcinosis with distal renal tubular acidosis (dRTA) while investigating for short stature. She later on developed features of nephrotic syndrome (NS) while on treatment for RTA. Investigation for the cause of NS revealed very strong serological evidence in favor of systemic lupus erythematosus (SLE). Histopathological confirmation could not be done due to bilateral severely contracted kidneys. There are a few case reports of dRTA as the presentation of SLE, but nephrocalcinosis with dRTA with subsequent manifestation of SLE has hitherto not been reported in literature.

Development of a rapid thermal annealing process for polycrystalline silicon thin-film solar cells on glass

Energy Technology Data Exchange (ETDEWEB)

Rau, B. [Helmholtz Centre Berlin for Materials and Energy, Kekulestr. 5, D-12489 Berlin (Germany)], E-mail: bjoern.rau@helmholtz-berlin.de; Weber, T.; Gorka, B.; Dogan, P.; Fenske, F.; Lee, K.Y.; Gall, S.; Rech, B. [Helmholtz Centre Berlin for Materials and Energy, Kekulestr. 5, D-12489 Berlin (Germany)

2009-03-15

In this report, we discuss the influence of rapid thermal annealing (RTA) on the performance of polycrystalline Si (poly-Si) thin-film solar cells on glass where the poly-Si layers are differently prepared. The first part presents a comprehensive study of RTA treatments on poly-Si thin-films made by solid phase crystallization (SPC) (standard material of CSG Solar AG, Thalheim). By varying both plateau temperature (up to 1050 deg. C) and duration (up to 1000 s) of the annealing profile, we determined the parameters for a maximum open-circuit voltage (V{sub OC}). In addition, we applied our standard plasma hydrogenation treatment in order to passivate the remaining intra-grain defects and grain boundaries by atomic hydrogen resulting in a further increase of V{sub OC}. We found, that the preceding RTA treatment increases the effect of hydrogenation already at comparable low RTA temperatures. The effect on hydrogenation increases significantly with RTA temperature. In a second step we investigated the effect of the RTA and hydrogenation on large-grained poly-Si films based on the epitaxial thickening of poly-Si seed layers.

Flux through a Markov chain

International Nuclear Information System (INIS)

Floriani, Elena; Lima, Ricardo; Ourrad, Ouerdia; Spinelli, Lionel

2016-01-01

Highlights: • The flux through a Markov chain of a conserved quantity (mass) is studied. • Mass is supplied by an external source and ends in the absorbing states of the chain. • Meaningful for modeling open systems whose dynamics has a Markov property. • The analytical expression of mass distribution is given for a constant source. • The expression of mass distribution is given for periodic or random sources. - Abstract: In this paper we study the flux through a finite Markov chain of a quantity, that we will call mass, which moves through the states of the chain according to the Markov transition probabilities. Mass is supplied by an external source and accumulates in the absorbing states of the chain. We believe that studying how this conserved quantity evolves through the transient (non-absorbing) states of the chain could be useful for the modelization of open systems whose dynamics has a Markov property.

A chain of FPU cells

NARCIS (Netherlands)

Verhulst, F.

2015-01-01

In contrast to the classical Fermi-Pasta-Ulam (FPU) chain, the inhomogeneous FPU chain shows nearly all the principal resonances. Using this fact, we can construct a periodic FPU chain of low dimension, for instance a FPU cell of four degrees-of-freedom, that can be used as a building block for a

Cellular corepressor TLE2 inhibits replication-and-transcription- activator-mediated transactivation and lytic reactivation of Kaposi's sarcoma-associated herpesvirus.

Science.gov (United States)

He, Zhiheng; Liu, Yunhua; Liang, Deguang; Wang, Zhuo; Robertson, Erle S; Lan, Ke

2010-02-01

Replication and transcription activator (RTA) encoded by open reading frame 50 (ORF50) of Kaposi's sarcoma-associated herpesvirus (KSHV) is essential and sufficient to initiate lytic reactivation. RTA activates its target genes through direct binding with high affinity to its responsive elements or by interaction with cellular factors, such as RBP-Jkappa, Ap-1, C/EBP-alpha, and Oct-1. In this study, we identified transducin-like enhancer of split 2 (TLE2) as a novel RTA binding protein by using yeast two-hybrid screening of a human spleen cDNA library. The interaction between TLE2 and RTA was confirmed by glutathione S-transferase (GST) binding and coimmunoprecipitation assays. Immunofluorescence analysis showed that TLE2 and RTA were colocalized in the same nuclear compartment in KSHV-infected cells. This interaction recruited TLE2 to RTA bound to its recognition sites on DNA and repressed RTA auto-activation and transactivation activity. Moreover, TLE2 also inhibited the induction of lytic replication and virion production driven by RTA. We further showed that the Q (Gln-rich), SP (Ser-Pro-rich), and WDR (Trp-Asp repeat) domains of TLE2 and the Pro-rich domain of RTA were essential for this interaction. RBP-Jkappa has been shown previously to bind to the same Pro-rich domain of RTA, and this binding can be subject to competition by TLE2. In addition, TLE2 can form a complex with RTA to access the cognate DNA sequence of the RTA-responsive element at different promoters. Intriguingly, the transcription level of TLE2 could be upregulated by RTA during the lytic reactivation process. In conclusion, we identified a new RTA binding protein, TLE2, and demonstrated that TLE2 inhibited replication and transactivation mediated by RTA. This provides another potentially important mechanism for maintenance of KSHV viral latency through interaction with a host protein.

Towards a Food Safety Knowledge Base Applicable in Crisis Situations and Beyond

Directory of Open Access Journals (Sweden)

Alexander Falenski

2015-01-01

Full Text Available In case of contamination in the food chain, fast action is required in order to reduce the numbers of affected people. In such situations, being able to predict the fate of agents in foods would help risk assessors and decision makers in assessing the potential effects of a specific contamination event and thus enable them to deduce the appropriate mitigation measures. One efficient strategy supporting this is using model based simulations. However, application in crisis situations requires ready-to-use and easy-to-adapt models to be available from the so-called food safety knowledge bases. Here, we illustrate this concept and its benefits by applying the modular open source software tools PMM-Lab and FoodProcess-Lab. As a fictitious sample scenario, an intentional ricin contamination at a beef salami production facility was modelled. Predictive models describing the inactivation of ricin were reviewed, relevant models were implemented with PMM-Lab, and simulations on residual toxin amounts in the final product were performed with FoodProcess-Lab. Due to the generic and modular modelling concept implemented in these tools, they can be applied to simulate virtually any food safety contamination scenario. Apart from the application in crisis situations, the food safety knowledge base concept will also be useful in food quality and safety investigations.

CHAINS-PC, Decay Chain Atomic Densities

International Nuclear Information System (INIS)

1994-01-01

1 - Description of program or function: CHAINS computes the atom density of members of a single radioactive decay chain. The linearity of the Bateman equations allows tracing of interconnecting chains by manually accumulating results from separate calculations of single chains. Re-entrant loops can be treated as extensions of a single chain. Losses from the chain are also tallied. 2 - Method of solution: The Bateman equations are solved analytically using double-precision arithmetic. Poles are avoided by small alterations of the loss terms. Multigroup fluxes, cross sections, and self-shielding factors entered as input are used to compute the effective specific reaction rates. The atom densities are computed at any specified times. 3 - Restrictions on the complexity of the problem: Maxima of 100 energy groups, 100 time values, 50 members in a chain

A Review of the Wood Pellet Value Chain, Modern Value/Supply Chain Management Approaches, and Value/Supply Chain Models

OpenAIRE

Hughes, Natalie M.; Shahi, Chander; Pulkki, Reino

2014-01-01

We reviewed 153 peer-reviewed sources to provide identification of modern supply chain management techniques and exploration of supply chain modeling, to offer decision support to managers. Ultimately, the review is intended to assist member-companies of supply chains, mainly producers, improve their current management approaches, by directing them to studies that may be suitable for direct application to their supply chains and value chains for improved efficiency and profitability. We found...

A remark on Dickey's stabilizing chain

International Nuclear Information System (INIS)

Svinin, Andrei K.

2011-01-01

We observe that Dickey's stabilizing chain can be naturally included into two-dimensional chain of infinitely many copies of equations of KP hierarchy. -- Highlights: → In this study we consider Dickey's stabilizing chain. → We construct two-dimensional chain of dressing truncated operators. → We show that Dickey's stabilizing chain can be included into two-dimensional chain of KP hierarchies.

Creative industries value chain: The value chain logic in supply chain relationships

OpenAIRE

Emilia Madudová

2017-01-01

The purpose of this paper is to provide a deeper look into value chain logic in supply chain relationships in a creative industries value chains. In recent years, value has been recognized as a key factor in better understanding of consumer behavior and gaining a competitive advantage. In a value chain, added value should be defined at every step of the chain. There should be defined activity which adds value as well as the activity that subtracts any value. The total value can be then calcul...

The composite supply chain efficiency model: A case study of the Sishen-Saldanha supply chain

Directory of Open Access Journals (Sweden)

Leila L. Goedhals-Gerber

2016-01-01

Full Text Available As South Africa strives to be a major force in global markets, it is essential that South African supply chains achieve and maintain a competitive advantage. One approach to achieving this is to ensure that South African supply chains maximise their levels of efficiency. Consequently, the efficiency levels of South Africa’s supply chains must be evaluated. The objective of this article is to propose a model that can assist South African industries in becoming internationally competitive by providing them with a tool for evaluating their levels of efficiency both as individual firms and as a component in an overall supply chain. The Composite Supply Chain Efficiency Model (CSCEM was developed to measure supply chain efficiency across supply chains using variables identified as problem areas experienced by South African supply chains. The CSCEM is tested in this article using the Sishen-Saldanda iron ore supply chain as a case study. The results indicate that all three links or nodes along the Sishen-Saldanha iron ore supply chain performed well. The average efficiency of the rail leg was 97.34%, while the average efficiency of the mine and the port were 97% and 95.44%, respectively. The results also show that the CSCEM can be used by South African firms to measure their levels of supply chain efficiency. This article concludes with the benefits of the CSCEM.

Prevalence of posttraumatic stress disorder among road traffic accident survivors: A PRISMA-compliant meta-analysis.

Science.gov (United States)

Lin, Wanli; Gong, Lina; Xia, Miaojuan; Dai, Wenjie

2018-01-01

Involvement in road traffic accidents (RTAs) may put individuals at increased risk for a wide range of psychiatric disorders, among which posttraumatic stress disorder (PTSD) presents a public health issue. However, a great disparity was observed among studies exploring the prevalence of PTSD among RTA survivors. This meta-analysis aimed to explore the pooled prevalence of PTSD among RTA survivors. Electronic databases of PubMed, Embase, Web of Science, PsycARTICLES, PsycINFO, and CINAHL were searched to identify relevant studies. Study selection and data extraction were conducted independently by 2 investigators, and a meta-analysis was performed to synthesize the data. Heterogeneity among studies was evaluated using the Cochran Q test and quantified using the I statistic. Subgroup analyses were performed to identify the source of the heterogeneity. The possibility of publication bias was assessed using Egger linear test. Fifteen eligible studies containing 6804 RTA survivors were identified in this meta-analysis, of which 1489 were identified with PTSD. The pooled prevalence of PTSD among RTA survivors was 22.25% (95% confidence interval: 16.71%-28.33%). A high degree of heterogeneity was observed across studies (I = 97.1%, P < .001), with reported PTSD prevalence ranging from 6.3% to 58.3%. Subgroup analyses found that the prevalence of PTSD among RTA survivors varied significantly across studies in relation to the instrument used to assess PTSD, country, race, gender, and education level (P < .05). The high pooled prevalence of PTSD among RTA survivors found in this study significantly underscores the need for providing timely and effective intervention strategies for RTA survivors. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

Rapid thermal annealing of InAs/GaAs quantum dots under a GaAs proximity cap

International Nuclear Information System (INIS)

Babinski, Adam; Jasinski, J.; Bozek, R.; Szepielow, A.; Baranowski, J. M.

2001-01-01

The effect of postgrowth rapid thermal annealing (RTA) on GaAs proximity-capped structures with self-assembled InAs/GaAs quantum dots (QDs) is investigated using transmission electron microscopy (TEM) and photoluminescence (PL). As can be seen from the TEM images, QDs increase their lateral sizes with increasing annealing temperature (up to 700 C). QDs cannot be distinguished after RTA at temperature 800 C or higher, and substantial thickening of the wetting layer can be seen instead. The main PL peak blueshifts as a result of RTA. We propose that in the as-grown sample as well, as in samples annealed at temperatures up to 700 C, the peak is due to the QDs. After RTA at 800 C and higher the PL peak is due to a modified wetting layer. Relatively fast dissolution of QDs is explained in terms of strain-induced lateral Ga/In interdiffusion. It is proposed that such a process may be of importance in proximity-capped RTA, when no group-III vacancy formation takes place at the sample/capping interface

Stochastic Simulation of a Full-Chain Reptation Model with Constraint Release, Chain-Length Fluctuations and Chain Stretching

DEFF Research Database (Denmark)

Neergaard, Jesper; Schieber, Jay D.

1999-01-01

A self-consistent reptation model that includes chain stretching, chain-length fluctuations, segment connectivity and constraint release is used to predict transient and steady flows. Quantitative comparisons are made with entangledsolution data. The model is able to capture quantitatively all...

Analysis of a quantum Markov chain

International Nuclear Information System (INIS)

Marbeau, J.; Gudder, S.

1990-01-01

A quantum chain is analogous to a classical stationary Markov chain except that the probability measure is replaced by a complex amplitude measure and the transition probability matrix is replaced by a transition amplitude matrix. After considering the general situation, we study a particular example of a quantum chain whose transition amplitude matrix has the form of a Dirichlet matrix. Such matrices generate a discrete analog of the usual continuum Feynman amplitude. We then compute the probability distribution for these quantum chains

USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

Directory of Open Access Journals (Sweden)

A.L.V. Raubenheimer

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

Prediction of the binding affinities of peptides to class II MHC using a regularized thermodynamic model

Directory of Open Access Journals (Sweden)

Mittelmann Hans D

2010-01-01

Full Text Available Abstract Background The binding of peptide fragments of extracellular peptides to class II MHC is a crucial event in the adaptive immune response. Each MHC allotype generally binds a distinct subset of peptides and the enormous number of possible peptide epitopes prevents their complete experimental characterization. Computational methods can utilize the limited experimental data to predict the binding affinities of peptides to class II MHC. Results We have developed the Regularized Thermodynamic Average, or RTA, method for predicting the affinities of peptides binding to class II MHC. RTA accounts for all possible peptide binding conformations using a thermodynamic average and includes a parameter constraint for regularization to improve accuracy on novel data. RTA was shown to achieve higher accuracy, as measured by AUC, than SMM-align on the same data for all 17 MHC allotypes examined. RTA also gave the highest accuracy on all but three allotypes when compared with results from 9 different prediction methods applied to the same data. In addition, the method correctly predicted the peptide binding register of 17 out of 18 peptide-MHC complexes. Finally, we found that suboptimal peptide binding registers, which are often ignored in other prediction methods, made significant contributions of at least 50% of the total binding energy for approximately 20% of the peptides. Conclusions The RTA method accurately predicts peptide binding affinities to class II MHC and accounts for multiple peptide binding registers while reducing overfitting through regularization. The method has potential applications in vaccine design and in understanding autoimmune disorders. A web server implementing the RTA prediction method is available at http://bordnerlab.org/RTA/.

Tomato bushy stunt virus (TBSV), a versatile platform for polyvalent display of antigenic epitopes and vaccine design

International Nuclear Information System (INIS)

Kumar, Shantanu; Ochoa, Wendy; Singh, Pratik; Hsu, Catherine; Schneemann, Anette; Manchester, Marianne; Olson, Mark; Reddy, Vijay

2009-01-01

Viruses-like particles (VLPs) are frequently being used as platforms for polyvalent display of foreign epitopes of interest on their capsid surface to improve their presentation enhancing the antigenicity and host immune response. In the present study, we used the VLPs of Tomato bushy stunt virus (TBSV), an icosahedral plant virus, as a platform to display 180 copies of 16 amino acid epitopes of ricin toxin fused to the C-terminal end of a modified TBSV capsid protein (NΔ52). Expression of the chimeric recombinant protein in insect cells resulted in spontaneous assembly of VLPs displaying the ricin epitope. Cryo-electron microscopy and image reconstruction of the chimeric VLPs at 22 A resolution revealed the locations and orientation of the ricin epitope exposed on the TBSV capsid surface. Furthermore, injection of chimeric VLPs into mice generated antisera that detected the native ricin toxin. The ease of fusing of short peptides of 15-20 residues and their ability to form two kinds (T = 1, T = 3) of bio-nanoparticles that result in the display of 60 or 180 copies of less constrained and highly exposed antigenic epitopes makes TBSV an attractive and versatile display platform for vaccine design.

The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

DEFF Research Database (Denmark)

Møller, Charles

2006-01-01

in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

A case report on ATP6V0A4 gene mutation: Forecast of familial ...

African Journals Online (AJOL)

... screening of recessive forms of dRTA independent of hearing status and offer suitable intervention to treat dRTA as well as diminish the influence of SNHL on the child's learning and communication in daily life. Keywords: Renal tubular acidosis, Homeostasis, Electrolytes, Hearing impairment, ATP6V0A4 gene, Mutation ...

Road safety in India: A Public Health Concern

Directory of Open Access Journals (Sweden)

Shradha S Parsekar

2015-06-01

Full Text Available Introduction: Road traffic accident (RTA is one of the major preventable public health problems and is on the rise which can be attributed to increase in the number of vehicles and lifestyle changes and risky attitudes. This paper is intended to search for available published information which in turn might help the policy makers as well as practitioners to make use of it. Methods: The information has been gathered from papers related to RTAs from various databases such as PubMed, Google scholar, government websites to get an overview in India for the last 15 years. Result and Conclusion: The burden of RTA was found to be considerably high globally as well as in India. RTA causes a number of effects which can be: economical, physical, psychological and social. The burden of RTA is on the rise which makes it necessary to take a multi-sectoral approach in its prevention and control

Equivalence of chain conformations in the surface region of a polymer melt and a single Gaussian chain under critical conditions.

Science.gov (United States)

Skvortsov, A M; Leermakers, F A M; Fleer, G J

2013-08-07

In the melt polymer conformations are nearly ideal according to Flory's ideality hypothesis. Silberberg generalized this statement for chains in the interfacial region. We check the Silberberg argument by analyzing the conformations of a probe chain end-grafted at a solid surface in a sea of floating free chains of concentration φ by the self-consistent field (SCF) method. Apart from the grafting, probe chain and floating chains are identical. Most of the results were obtained for a standard SCF model with freely jointed chains on a six-choice lattice, where immediate step reversals are allowed. A few data were generated for a five-choice lattice, where such step reversals are forbidden. These coarse-grained models describe the equilibrium properties of flexible atactic polymer chains at the scale of the segment length. The concentration was varied over the whole range from φ = 0 (single grafted chain) to φ = 1 (probe chain in the melt). The number of contacts with the surface, average height of the free end and its dispersion, average loop and train length, tail size distribution, end-point and overall segment distributions were calculated for a grafted probe chain as a function of φ, for several chain lengths and substrate∕polymer interactions, which were varied from strong repulsion to strong adsorption. The computations show that the conformations of the probe chain in the melt do not depend on substrate∕polymer interactions and are very similar to the conformations of a single end-grafted chain under critical conditions, and can thus be described analytically. When the substrate∕polymer interaction is fixed at the value corresponding to critical conditions, all equilibrium properties of a probe chain are independent of φ, over the whole range from a dilute solution to the melt. We believe that the conformations of all flexible chains in the surface region of the melt are close to those of an appropriate single chain in critical conditions, provided

A concept for collaborative supply chain planning

DEFF Research Database (Denmark)

Alfnes, E.; Dreyer, H.C.; Hvolby, Hans-Henrik

2012-01-01

The main challenge for many manufacturers is the increased complexity of the supply chain, and as supply chains get more complicated enterprises require better tools for supply chain planning and execution. Many vendors offer systems to plan and control in-house operations, whereas mainly large...... vendors such as Oracle, SAP and I2 offer supply chain planning systems. This limits the ability for SMEs to exploit the supply chain planning options. This paper is part of a research project carried out to develop a new supply chain add-on for Microsoft AX, a very common system for SMEs. The paper...... discusses current supply chain planning solutions and presents a more simple and adaptive concept to be used in both SMEs and larger enterprises....

A novel Nrf2 activator from microbial transformation inhibits radiation-induced dermatitis in mice

International Nuclear Information System (INIS)

Nakagami, Yasuhiro; Masuda, Kayoko

2016-01-01

Nuclear factor erythroid 2-related factor 2 (Nrf2) is a transcriptional factor that regulates many antioxidants, and we have recently succeeded in obtaining a novel Nrf2 activator, RS9, from microbial transformation. RS9 is categorized as a triterpenoid, and well-known triterpenoids such as RTA 402 (bardoxolone methyl) and RTA 408 have been tested in clinical trials. RTA 408 lotion is currently being tested in patients at risk for radiation dermatitis. This prompted us to study the profiles of RS9 in the skin. All the above triterpenoids increased the level of an Nrf2-targeted gene, NADPH:quinone oxidoreductase-1, in normal human epidermal keratinocytes. Among them, the activity of RS9 was prominent; furthermore, the cellular toxicity was less compared with RTA compounds. BALB/c mice were irradiated with 30 Gy/day on Day 0, and compounds were topically applied on the back once daily from Day 1 to Day 30. Dermatitis scores peaked on Day 18, with a score of 2.6 in vehicle-treated mice, and topical applications of 0.1% RTA 402, RTA 408 and RS9 reduced the scores to 1.8, 2.0 and 1.4, respectively. Moreover, the percentage of animals with scores ≥2 was analyzed, and 0.1% RS9 suppressed the percentage from 100% to 47%. These results imply that RS9 has potential efficacy for treating radiation dermatitis.

Real time alert system: a disease management system leveraging health information exchange.

Science.gov (United States)

Anand, Vibha; Sheley, Meena E; Xu, Shawn; Downs, Stephen M

2012-01-01

Rates of preventive and disease management services can be improved by providing automated alerts and reminders to primary care providers (PCPs) using of health information technology (HIT) tools. Using Adaptive Turnaround Documents (ATAD), an existing Health Information Exchange (HIE) infrastructure and office fax machines, we developed a Real Time Alert (RTA) system. RTA is a computerized decision support system (CDSS) that is able to deliver alerts to PCPs statewide for recommended services around the time of the patient visit. RTA is also able to capture structured clinical data from providers using existing fax technology. In this study, we evaluate RTA's performance for alerting PCPs when their patients with asthma have an emergency room visit anywhere in the state. Our results show that RTA was successfully able to deliver "just in time" patient-relevant alerts to PCPs across the state. Furthermore, of those ATADs faxed back and automatically interpreted by the RTA system, 35% reported finding the provided information helpful. The PCPs who reported finding information helpful also reported making a phone call, sending a letter or seeing the patient for follow up care. We have successfully demonstrated the feasibility of electronically exchanging important patient related information with the PCPs statewide. This is despite a lack of a link with their electronic health records. We have shown that using our ATAD technology, a PCP can be notified quickly of an important event such as a patient's asthma related emergency room admission so further follow up can happen in near real time.

Interaction of a novel Tn (GalNAc alpha 1-->Ser/Thr) glycoprotein with Gal, GalNAc and GlcNAc specific lectins.

Science.gov (United States)

Wu, A M; Wu, J H; Shen, F

1994-01-14

A naturally occurring Tn glycoprotein (Native ASG-Tn) with GalNAc alpha 1-->Ser/Thr as the only carbohydrate side chains, has been prepared from armadillo submandibular glands. In a quantitative precipitin assay, this glycoprotein completely precipitated Maclura pomifera (MPA), Vicia villosa B4 (VVL-B4) and Artocarpus integrifolia (Jacalin, AIL). It also reacted well with Helix pomatia (HPL) and Wistaria floribunda (WFL) and precipitated over 75% of the lectin nitrogen added, but poorly with Ricinus communis agglutinin (RCA1), ricin, peanut (Arachis hypogaea, PNA), Abrus precatorius agglutinin (APA) and Triticum vulgaris (WGA). This finding suggests that this novel Tn-glycoprotein may serve as a useful reagent for differentiating Tn and T specific monoclonal antibodies and lectins.

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

Science.gov (United States)

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

Standard handbook of chains chains for power transmission and material handling

CERN Document Server

2005-01-01

A BRIEF HISTORY OF THE DEVELOPMENT OF CHAINEarly DevelopmentsCog ChainCast Detachable ChainCast Pintle ChainPrecision Roller ChainEngineering Steel ChainSilent ChainFlat-Top ChainTerminologyA CHAIN OVERVIEW: USES AND ADVANTAGESGeneralTypes of ChainScope of Chains CoveredStyles and Forms of ChainsStraight and Offset Link ChainsChains With and Without RollersUses of ChainStandard Chains and Their UsesThe Advantages of Chains in ApplicationsAdvantages of Roller Chains in DrivesAdvantages of Silent Chain Drives

Diffusion of chains in a periodic potential

Science.gov (United States)

Terranova, G. R.; Mártin, H. O.; Aldao, C. M.

2017-09-01

We studied the diffusion of 1D rigid chains in a square wave potential of period T. We considered chains of type A (composed of N particles A) and chains of type A-B (composed of N/2 particles A and N/2 particles B). The square wave potential represents domains, a lamellar structure observed for block copolymers, in which the repulsive δ energy between each A particle (B particle) of the chain and B particles (A particles) of the medium where the chains diffuse. From Monte Carlo simulations and analytical results it is found that the normalized diffusivity D, for N\\ll T , presents a universal behavior as a function of X  =  Nδ for chains of type A and X  =  (Nδ  -  lnT 2) for chains of type A-B, with and exponential decay for large values of X. For fixed values of δ and T, D is a periodic function of N with period T and 2T for chains of type A and type A-B, respectively.

Llama-Derived Single Domain Antibodies Specific for Abrus Agglutinin

Science.gov (United States)

Goldman, Ellen R.; Anderson, George P.; Zabetakis, Dan; Walper, Scott; Liu, Jinny L.; Bernstein, Rachael; Calm, Alena; Carney, James P.; O’Brien, Thomas W.; Walker, Jennifer L.; Garber, Eric A. E.

2011-01-01

Llama derived single domain antibodies (sdAb), the recombinantly expressed variable heavy domains from the unique heavy-chain only antibodies of camelids, were isolated from a library derived from llamas immunized with a commercial abrin toxoid preparation. Abrin is a potent toxin similar to ricin in structure, sequence and mechanism of action. The selected sdAb were evaluated for their ability to bind to commercial abrin as well as abrax (a recombinant abrin A-chain), purified abrin fractions, Abrus agglutinin (a protein related to abrin but with lower toxicity), ricin, and unrelated proteins. Isolated sdAb were also evaluated for their ability to refold after heat denaturation and ability to be used in sandwich assays as both capture and reporter elements. The best binders were specific for the Abrus agglutinin, showing minimal binding to purified abrin fractions or unrelated proteins. These binders had sub nM affinities and regained most of their secondary structure after heating to 95 °C. They functioned well in sandwich assays. Through gel analysis and the behavior of anti-abrin monoclonal antibodies, we determined that the commercial toxoid preparation used for the original immunizations contained a high percentage of Abrus agglutinin, explaining the selection of Abrus agglutinin binders. Used in conjunction with anti-abrin monoclonal and polyclonal antibodies, these reagents can fill a role to discriminate between the highly toxic abrin and the related, but much less toxic, Abrus agglutinin and distinguish between different crude preparations. PMID:22174977

The Financial Supply Chain Management: a New Solution for Supply Chain Resilience

Directory of Open Access Journals (Sweden)

Virgil Popa

2013-02-01

Full Text Available In the present article, the author aims to find solutions to optimize the supply chain for the cash flow – a flow of products reversed from the physical one and the two-ways flow of information. In the last 15-20 years, academics and practitioners were oriented towards increasing the speed, cost reduction on supply chain material’s flow, oriented towards 3RP (3 Resource Planning logistics solutions and management solutions such as outsourcing or collaborative management. In terms of information flow, there has been a real revolution with the rise of the Internet and information technology standards introduced by the VICS (Voluntary Interindustry Commerce Standards, CSCMP (Council of Supply Chain Management Professionals, SCC (Supply Chain Council şi ECR Europe (Efficient Consumer Respons. The objective of this paper is to identify new ways of working together on supply chain financial flows. Methods used are the documentation in the literature and the practices of transnational companies under recession. Results refer to the identification of new solutions such as reverse factoring. A comparative analysis regarding the european and national regulations gets us to the conclusion that Romania is still tributary to traditional commercial credit. We propose that the Collaborative management, as a modus vivendi in a globalized and super computerized world, must be included within all Romanian organizations life, within the Supply Chain, but also those which are 3PL (Third Part Logistics and 4PL (Four Part Logistics organizations, where not only information services are included, but also financial services (banks and specialized financial institutions.

Chain and network science: A research framework

NARCIS (Netherlands)

Omta, S.W.F.; Trienekens, J.H.; Beers, G.

2001-01-01

In this first article of the Journal on Chain and Network Science the base-line is set for a discussion on contents and scope of chain and network theory. Chain and network research is clustered into four main ‘streams’: Network theory, social capital theory, supply chain management and business

Development Value Chains meet Business Supply Chains : The concept of Global Value Chains unraveled

NARCIS (Netherlands)

S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen); S.R. Vellema (Sietze)

2011-01-01

textabstractValue chain promotion is considered a key element of private sector development strategies and pro-poor growth. However, (value) chain concepts are rather complex and unclear. This paper unravels the concept of global value chains and studies the diversity of key value chain-related

SUPPLY CHAIN STRATEGIES IN THE CONTEXT OF AN E-COMMERCE CHAIN (E-CHAIN

Directory of Open Access Journals (Sweden)

João Gilberto Mendes do Reis

2014-05-01

Full Text Available This paper purpose to explore the relationships between supply chain strategies and product performance in retail e-commerce. In this case, we concern that in current, in order to bear up under competition, organizations have to manage their supply chains so that they meet the needs of their final customers. With this concept in mind, the research presented in this study focuses on establishing the right strategy for supply chains according to their product segment. Thus, after a Literature Review, the paper explain a methodology based in different authors studies. Finally the article focuses on a pratical case in e-commerce retail that describes its application in this field. The research shows that it is possible to use a methodology for classifying supply chains using chain strategies and product features. The use of the right strategy for supply chains will improve the competitive advantage of businesses. One limitation is that the methodology study focuses on only two e-commerce segment; future studies may go further in refining the proposed framework for other segments. The aim of this research is to offer businesses a model for evaluating supply chains, allowing them to improve the performance of their products and services by using the right strategy for supply chains. The classification proposal of this paper presents an original model for classification of supply chains based on different studies on the theme.

Leading a supply chain turnaround.

Science.gov (United States)

Slone, Reuben E

2004-10-01

Just five years ago, salespeople at Whirlpool were in the habit of referring to their supply chain organization as the "sales disablers." Now the company excels at getting products to the right place at the right time--while managing to keep inventories low. How did that happen? In this first-person account, Reuben Slone, Whirlpool's vice president of Global Supply Chain, describes how he and his colleagues devised the right supply chain strategy, sold it internally, and implemented it. Slone insisted that the right focal point for the strategy was the satisfaction of consumers at the end of the supply chain. Most supply chain initiatives do the opposite: They start with the realities of a company's manufacturing base and proceed from there. Through a series of interviews with trade customers large and small, his team identified 27 different capabilities that drove industry perceptions of Whirlpool's performance. Knowing it was infeasible to aim for world-class performance across all of them, Slone weighed the costs of excelling at each and found the combination of initiatives that would provide overall competitive advantage. A highly disciplined project management office and broad training in project management were key to keeping work on budget and on benefit. Slone set an intense pace--three "releases" of new capabilities every month--that the group maintains to this day. Lest this seem like a technology story, however, Slone insists it is just as much a "talent renaissance." People are proud today to be part of Whirlpool's supply chain organization, and its new generation of talent will give the company a competitive advantage for years to come.

Probabilistic Chain Teleportation of a Qutrit-State

International Nuclear Information System (INIS)

Wang Meiyu; Yan Fengli

2010-01-01

We investigate chain teleportation of a qutrit-state via the non-maximally two-qutrit entangled channels. For the case of four parties, the efficiencies of two chain teleportation protocols, the separate chain teleportation protocol (SCTP), and the global chain teleportation protocol (GCTP), are calculated. In SCTP the errors are corrected between every step while in GCTP the errors are corrected only at the end. Furthermore, we present a piecewise global chain teleportation protocol (PGCTP) for keeping away from the inconvenience of error-correction of GCTP. We show that PGCTP is more efficient than SCTP. (general)

The influence of power in supply chain innovation; a case-study of the Dutch wheat chain

NARCIS (Netherlands)

Pol, Hanneke; Visscher, Klaasjan

2010-01-01

The purpose of this article is to clarify the relation between the power structure of a supply chain and the possibilities to realize supply chain innovations. In an in-depth case study of the faltering start of an innovation trajectory in the Dutch wheat supply chain, we show that supply chain

A scaling analysis of a cat and mouse Markov chain

NARCIS (Netherlands)

Litvak, Nelli; Robert, Philippe

2012-01-01

If ($C_n$) a Markov chain on a discrete state space $S$, a Markov chain ($C_n, M_n$) on the product space $S \\times S$, the cat and mouse Markov chain, is constructed. The first coordinate of this Markov chain behaves like the original Markov chain and the second component changes only when both

Fusion chain reaction - a chain reaction with charged particles

International Nuclear Information System (INIS)

Peres, A.; Shvarts, D.

1975-01-01

When a DT-plasma is compressed to very high density, the particles resulting from nuclear reactions give their energy mostly to D and T ions, by nuclear collisions, rather than to electrons as usual. Fusion can thus proceed as a chain reaction, without the need of thermonuclear temperatures. In this paper, we derive relations for the suprathermal ion population created by a fusion reaction. Numerical integration of these equations shows that a chain reaction can proceed in a cold infinite DT-plasma at densities above 8.4x10 27 ions.cm -3 . Seeding the plasma with a small amount of 6 Li reduces the critical density to 7.2x10 27 ions.cm -3 (140000times the normal solid density). (author)

The value of Retrospective and Concurrent Think Aloud in formative usability testing of a physician data query tool.

Science.gov (United States)

Peute, Linda W P; de Keizer, Nicolette F; Jaspers, Monique W M

2015-06-01

To compare the performance of the Concurrent (CTA) and Retrospective (RTA) Think Aloud method and to assess their value in a formative usability evaluation of an Intensive Care Registry-physician data query tool designed to support ICU quality improvement processes. Sixteen representative intensive care physicians participated in the usability evaluation study. Subjects were allocated to either the CTA or RTA method by a matched randomized design. Each subject performed six usability-testing tasks of varying complexity in the query tool in a real-working context. Methods were compared with regard to number and type of problems detected. Verbal protocols of CTA and RTA were analyzed in depth to assess differences in verbal output. Standardized measures were applied to assess thoroughness in usability problem detection weighted per problem severity level and method overall effectiveness in detecting usability problems with regard to the time subjects spent per method. The usability evaluation of the data query tool revealed a total of 43 unique usability problems that the intensive care physicians encountered. CTA detected unique usability problems with regard to graphics/symbols, navigation issues, error messages, and the organization of information on the query tool's screens. RTA detected unique issues concerning system match with subjects' language and applied terminology. The in-depth verbal protocol analysis of CTA provided information on intensive care physicians' query design strategies. Overall, CTA performed significantly better than RTA in detecting usability problems. CTA usability problem detection effectiveness was 0.80 vs. 0.62 (pusability problems of a moderate (0.85 vs. 0.7) and severe nature (0.71 vs. 0.57). In this study, the CTA is more effective in usability-problem detection and provided clarification of intensive care physician query design strategies to inform redesign of the query tool. However, CTA does not outperform RTA. The RTA

The role of the supply chain executive in supply chain integration: a behavioral approach

OpenAIRE

ELENA REVILLA; LUIS GOMEZ - MEJIA

2008-01-01

Applying a behavioural approach of agency theory, this paper aimed to identify the most appropriate employment and compensation system (ECS) for supply chain executives in order to foster supply chain integration. We attempted to develop a novel approach of how encourages supply chain integration from the perspective of managerial incentives, an enabler that has not been analyzed in the literature. The paper presents the analysis of three sources of risk bearing - compensation risk, employmen...

Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

OpenAIRE

Templar, Simon; Hofmann, Erik; Findlay, Charles

2016-01-01

Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

A Three Level Framework for Closed-Loop Supply Chain Management—Linking Society, Chain and Actor Level

Directory of Open Access Journals (Sweden)

Stefan Seuring

2011-04-01

Full Text Available Supply chain management and closed-loop supply chain management (CLSCM have developed into established concepts in recent years. The related material cycles and product returns form an important part of all related processes with high potential for reducing environmental burden. The paper proposes a framework for (environmentally triggered closed-loop supply chain management, spanning three different levels: the societal or governance, the chain and the actor level. Within each level, a set of activities or processes can be identified. Taken together, the levels allow a comprehensive analysis of a closed-loop supply chain system. This is illustrated building on two case studies in the textile and apparel industry, where closed-loop supply chains have been designed to take specific apparel products back. The case studies are analyzed against all three levels and allow exemplification of related challenges and interrelations among the three levels. The three levels contribute to the further comprehension of the multiple issues having to be taken into account for successfully implementing closed-loop supply chains.

Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

Science.gov (United States)

Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

2010-02-01

Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

Road traffic accidents: a lifetime financial blow the victim cripples under

Directory of Open Access Journals (Sweden)

Preeti Verma

2015-06-01

Full Text Available Introduction: WHO states that the proportion of deaths and casualty registrations of RTA cases represents only the tip of the iceberg. A similar tip of the iceberg phenomenon exists between the visible expenses incurred due to the accidents and the much larger invisible losses are there that imperceptibly disable the family budget. Objective: (1 To estimate the total expenditure on treatment of RTA cases  and its proportion to their monthly family income on treatment.(2 To estimate the loss of wages of  RTA cases and project the other losses.(3 To enquire reimbursement of losses of RTA cases. Materials and methods: A hospital based cross sectional study, conducted at ED and Hospital of S.N. Medical College, Agra. Data were collected by using semi structured questionnaire from RTA cases or their attendants. Results: Out of 425 admitted RTA cases, 318 (74.8% had spent Rs > 5,000 on the treatment and 304(71.5% had lost their wages Rs >1, 000.  73.2% had incurred hospital expenses from 1to10 times or even more of their monthly family income. About 1/4th cases recovered completely and 64.01% recovered with temporary physical deficit. 3.5% had health insurance. 75.8% cases had remained hospitalized for more than1 week or up to a month duration and a strong positive correlation (r = 0.83 was found between the length of stay in the hospital and the amount spent on the treatment. Conclusion: The financial assault suffered by the road traffic accident cases and their families even if they are treated in Government Hospital are so huge that cannot be ignored.

Investigations of model polymers: Dynamics of melts and statics of a long chain in a dilute melt of shorter chains

International Nuclear Information System (INIS)

Bishop, M.; Ceperley, D.; Frisch, H.L.; Kalos, M.H.

1982-01-01

We report additional results on a simple model of polymers, namely the diffusion in concentrated polymer systems and the static properties of one long chain in a dilute melt of shorter chains. It is found, for the polymer sizes and time scales amenable to our computer calculations, that there is as yet no evidence for a ''reptation'' regime in a melt. There is some indication of reptation in the case of a single chain moving through fixed obstacles. No statistically significant effect of the change, from excluded volume behavior of the long chain to ideal behavior as the shorter chains grow, is observed

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

Directory of Open Access Journals (Sweden)

Dikky Indrawan

2018-05-01

Full Text Available Despite extensive efforts to control the highly pathogenic avian influenza (HPAI, it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA, focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

Science.gov (United States)

Indrawan, Dikky; Rich, Karl M.; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective.

Science.gov (United States)

Indrawan, Dikky; Rich, Karl M; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper

Distal renal tubular acidosis

Science.gov (United States)

... this disorder. Alternative Names Renal tubular acidosis - distal; Renal tubular acidosis type I; Type I RTA; RTA - distal; Classical RTA Images Kidney anatomy Kidney - blood and urine flow References Bose A, Monk RD, Bushinsky DA. Kidney ...

The public health threat of road traffic accidents in Nigeria: A call to ...

African Journals Online (AJOL)

Do RTA constitute a public health problem in Nigeria? If so, is there a pragmatic approach to combat this problem? A systematic literature search using the advanced features of various databases such as PubMed, Scopus, Embase, Google, and directory of open access journals was carried out using the key words “ RTA, ...

Heavy Chain Diseases

Science.gov (United States)

... of heavy chain produced: Alpha Gamma Mu Alpha Heavy Chain Disease Alpha heavy chain disease (IgA heavy ... the disease or lead to a remission. Gamma Heavy Chain Disease Gamma heavy chain disease (IgG heavy ...

Renal Tubular Acidosis after Jejunoileal Bypass for Morbid Obesity: role of secondary hyperparathyroidism

DEFF Research Database (Denmark)

Andersen, NN; Ladefoged, NN

1991-01-01

The effect of calcium infusion was studied in patients with renal tubular acidosis (RTA) and secondary hyperparathyroidism. Both developed after jejunoileal bypass operation (JIB) for morbid obesity. In three of four cases the acidification defect was abolished, probably due to a decrease of serum...... parathyroid hormone. As we found RTA in 9% (95% confidence limits 2-21%) of our patients, screening for acidosis is recommended in obesity patients after malabsorptive operations. RTA can be verified through an ammonium loading test. Before deciding on re-establishing bowel continuity due to RTA, we suggest...... and vitamin D supplementation. If RTA can be abolished through correction of calcium homeostasis, reoperation may be avoided. Before deciding on re-establishing bowel continuity in JIB patients with RTA, we therefore suggest that patients be evaluated for secondary hyperparathyroidism and any calcium...

A proposal for a green supply chain strategy

Directory of Open Access Journals (Sweden)

Carola Pinto Taborga

2018-05-01

Findings: The paper identifies some specific steps for developing a Green Supply Chain Strategy. The case study developed, demonstrates the importance of following a proper methodology based on a set of steps, it also demonstrates that some alternatives focus on improving the supply chain, such as the facilities location, can also improve the key performance indicator related with carbon emission.  Originality/value: The study provides guidance for manufacturing companies in implementing their Green Supply Chain Strategy.

A scaling analysis of a cat and mouse Markov chain

NARCIS (Netherlands)

Litvak, Nelli; Robert, Philippe

Motivated by an original on-line page-ranking algorithm, starting from an arbitrary Markov chain $(C_n)$ on a discrete state space ${\\cal S}$, a Markov chain $(C_n,M_n)$ on the product space ${\\cal S}^2$, the cat and mouse Markov chain, is constructed. The first coordinate of this Markov chain

Decision-Making for Supply Chain Integration Supply Chain Integration

CERN Document Server

Lettice, Fiona; Durowoju, Olatunde

2012-01-01

Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

Port supply chain integration : analyzing biofuel supply chains

NARCIS (Netherlands)

Stevens, Leonie C. E.; Vis, Iris F. A.

2016-01-01

This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role,

Epidemiology, clinical management, and outcomes of dogs involved in road traffic accidents in the United Kingdom (2009-2014).

Science.gov (United States)

Harris, Georgina L; Brodbelt, David; Church, David; Humm, Karen; McGreevy, Paul D; Thomson, Peter C; O'Neill, Dan

2018-03-01

To estimate the prevalence and risk factors for road traffic accidents (RTA) in dogs and describe the management and outcome of these dogs attending primary-care veterinary practices in the United Kingdom. Retrospective cross-sectional study. Primary-care veterinary practices in the United Kingdom. The study population included 199,464 dogs attending 115 primary-care clinics across the United Kingdom. Electronic patient records of dogs attending practices participating in the VetCompass Programme were assessed against selection criteria used to define RTA cases. Cases identified as RTAs were identified and manually verified to calculate prevalence. Univariable and multivariable logistic regression methods were used to evaluate associations between risk factors and RTA. The prevalence of RTA was 0.41%. Of the RTA cases, 615 (74.9%) were purebred, 322 (39.2%) were female, and 285 (54.8%) were insured. The median age at RTA was 2.5 years. After accounting for the effects of other factors, younger dogs had increased odds of an RTA event: dogs aged under 3 years showed 2.9 times the odds and dogs aged between 6-9 years showed 1.8 times the odds of an RTA event compared with dogs aged over 14 years. Males had 1.4 times the odds of an RTA event compared with females. Overall, 22.9% of cases died from a cause associated with RTA. Of dogs with information available, 34.0% underwent diagnostic imaging, 29.4% received intravenous fluid-therapy, 71.1% received pain relief, 46.0% were hospitalized, and 15.6% had surgery performed under general anesthetic. This study identified important demographic factors associated with RTA in dogs, notably being young and male. © Veterinary Emergency and Critical Care Society 2018.

Renal tubular acidosis complicated with hyponatremia due to cortisol insufficiency

OpenAIRE

Izumi, Yuichiro; Nakayama, Yushi; Onoue, Tomoaki; Inoue, Hideki; Mukoyama, Masashi

2015-01-01

Adrenocortical insufficiency such as occurs in Addison's disease causes hyponatremia and renal tubular acidosis (RTA). Hyponatremia results from both aldosterone and cortisol insufficiency. RTA is due to aldosterone insufficiency. The involvement of cortisol in RTA is unclear. Here, we report a woman in her 70s who was admitted to our hospital with severe hyponatremia (106 mEq/l) and RTA. The patient exhibited low plasma cortisol levels with little response to rapid adrenocorticotropic hormon...

Auto component supply chain: a path to global India

OpenAIRE

Kale, Shailendra; Palacios Fernández, Miguel; Tafur Segura, José Javier; Jarad, Rajendra; Chitale, C.M.

2011-01-01

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to m...

Use of the emotional Stroop to assess psychological trauma following traumatic brain injury.

Science.gov (United States)

Coates, Richard C

2008-04-01

A modified Stroop task was used to investigate the hypothesis that implicit memory may be a possible mechanism for the development of acute stress disorder (ASD) in patients who have suffered a closed head injury. Three groups of hospital patients were compared within 1 month post-trauma: road traffic accident (RTA) patients with a brain injury (n = 15), RTA patients without a brain injury (n = 13) and a control group of orthopaedic and plastics patients (n = 15). Participants named colours of five types of words: RTA-related words, words related to hospitalization, obsessive-compulsive disorder (OCD) words, positive words and neutral words. Participants were also administered the Acute Stress Disorder Interview and the State-Trait Anxiety Inventory. Both RTA patients with and without a brain injury demonstrated significant interference on words related to an RTA. Significant interference was unexpectedly observed for OCD words in RTA patients. Control patients did not display significant interference effects. Findings suggested that patients, both with and without explicit recall for an RTA, responded similarly on a task involving implicit memory for trauma. Possible implications for ASD and Post-traumatic Stress Disorder are discussed.

Falling chains

OpenAIRE

Wong, Chun Wa; Yasui, Kosuke

2005-01-01

The one-dimensional fall of a folded chain with one end suspended from a rigid support and a chain falling from a resting heap on a table is studied. Because their Lagrangians contain no explicit time dependence, the falling chains are conservative systems. Their equations of motion are shown to contain a term that enforces energy conservation when masses are transferred between subchains. We show that Cayley's 1857 energy nonconserving solution for a chain falling from a resting heap is inco...

In vivo therapy of a murine B cell tumor (BCL1) using antibody-ricin A chain immunotoxins

International Nuclear Information System (INIS)

Krolick, K.A.; Uhr, J.W.; Slavin, S.; Vitetta, E.S.

1982-01-01

Prolonged remissions were induced in mice bearing advanced BCL1 tumors by the combined approach of nonspecific cytoreductive therapy and administration of a tumor-reactive immunotoxin. Thus, the vast majority of the tumor cells (approximately 95%) were first killed by nonspecific cytoreductive therapy using total lymphoid irradiation (TLI) and splenectomy. The residual tumor cells were then eliminated by intravenous administration of an anti-delta immunotoxin. In three of four experiments, all animals treated in the above fashion appeared tumor free 12-16 wk later. In one experiment, blood cells from the mice in remission were transferred to normal BALB/c recipients, and the latter animals have not developed detectable tumor for the 6 mo of observation. Because 1-10 adoptively transferred BCL1 cells will cause tumor in normal BALB/c mice by 12 wk, the inability to transfer tumor to recipients might indicate that the donor animals were tumor free. In the remainder of the animals treated with the tumor-reactive immunotoxin there was a substantial remission in all animals, but the disease eventually reappeared. In contrast, all mice treated with the control immunotoxin or antibody alone relapsed significantly earlier

A dynamic game on Green Supply Chain Management

OpenAIRE

Mehrnoosh Khademi; Massimiliano Ferrara; Bruno Pansera; Mehdi Salimi

2015-01-01

In this paper, we establish a dynamic game to allocate CSR (Corporate Social Responsibility) to the members of a supply chain. We propose a model of three-tier supply chain in decentralized state that is including supplier, manufacturer and retailer. For analyzing supply chain performance in decentralized state and the relationships between the members of supply chain, we use Stackelberg game and we consider in this paper a hierarchical equilibrium solution for a two-level game. Specially, we...

A possibility for generation of two species of charge carriers along main-chain and side-chains for a π-conjugated polymer

International Nuclear Information System (INIS)

Kudo, Yuki; Kawabata, Kohsuke; Goto, Hiromasa

2013-01-01

Iodide doping produces charge carriers in π-conjugated polymers. Solitons can be generated in the case of polyacetylene, and polarons in the case of aromatic-type conjugated polymers. We synthesized a conjugated main-chain/side-chain polymer, which consists of polyene in the main-chain and aromatic-type conjugated units in the side-chains. Based on the SSH (Su, Schrieffer, Heeger) theoretical model of solitons in one-dimensional conjugated polymers, we experimentally carried out chemical doping to the main-chain/side-chains conjugated polymer. Generation of the charge carriers was examined by electron spin resonance spectroscopy. This study may lead to realization of a dual doping system of solitons and polarons in π-conjugation expanded to two-dimensional directions in polymers.

Supply chain design approaches for supply chain resilience: A qualitative study of South African fast-moving consumer goods grocery manufacturers

Directory of Open Access Journals (Sweden)

Assilah Agigi

2016-10-01

Full Text Available Orientation: In today’s globalised and complex business environment, firms are ever more vulnerable to supply chain disruptions, originating both internally and externally from the supply chain. Supply chain resilience minimises the impact of a disruption through design approaches, which allows the supply chain to respond appropriately to disruptive events. Research purpose: This article investigated the supply chain risks faced by grocery manufacturers in the South African fast-moving consumer goods (FMCG industry and explored supply chain design approaches that enable supply chain resilience. Motivation for the study: South African grocery manufacturers are faced with distinct risks. Whilst supply chain risk management studies have provided firms with certain guidelines to mitigate risk, supply chains are still vulnerable to unanticipated risks. Literature on supply chain resilience in the South African context is scant. The concept of supply chain resilience provides firms with strategies that are built into the supply chain that allow firms to react and recover swiftly from disruptions. Furthermore, supply chain resilience strategies assist firms in becoming less vulnerable to possible disruptions. Research design approach and method: This study was conducted by using a descriptive qualitative research design. Data were collected through semi-structured interviews with senior supply chain practitioners specifically within the South African FMCG grocery manufacturing industry. Main findings: The study found that labour unrest is the most common risk faced by the industry. Furthermore, strategic stock and supply chain mapping are of the most useful design approaches to enhance supply chain resilience. Practical/managerial implications: The study provides managers with new insights in guiding supply chain design decisions for resilient supply chains. Through the identification of risks and appropriate solutions linked to the various risks

Ernst Chain: a great man of science.

Science.gov (United States)

Kardos, Nelson; Demain, Arnold L

2013-08-01

This paper is a tribute to the scientific accomplishments of Ernst Chain and the influence he exerted over the fields of industrial microbiology and biotechnology. Chain is the father of the modern antibiotic era and all the benefits that these therapeutic agents have brought, i.e., longer life spans, greater levels of public health, widespread modern surgery, and control of debilitating infectious diseases, including tuberculosis, gonorrhea, syphilis, etc. Penicillin was the first antibiotic to become commercially available, and its use ushered in the age of antibiotics. The discovery of penicillin's bactericidal action had been made by Alexander Fleming in London in 1928. After publishing his observations in 1929, no further progress was made until the work was picked up in 1939 by scientists at Oxford University. The group was headed by Howard Florey, and Chain was the group's lead scientist. Chain was born and educated in Germany, and he fled in 1933 as a Jewish refugee from Nazism to England. Other important members of the Oxford research team were Norman Heatley and Edward Abraham. The team was able to produce and isolate penicillin under conditions of scarce resources and many technical challenges. Sufficient material was collected and tested on mice to successfully demonstrate penicillin's bactericidal action on pathogens, while being nontoxic to mammals. Chain directed the microbiological methods for producing penicillin and the chemical engineering methods to extract the material. This technology was transferred to US government facilities in 1941 for commercial production of penicillin, becoming an important element in the Allied war effort. In 1945, the Nobel Prize for medicine was shared by Fleming, Florey, and Chain in recognition of their work in developing penicillin as a therapeutic agent. After World War II, Chain tried to persuade the British government to fund a new national antibiotic industry with both research and production facilities. As

Newtonian Analysis of a Folded Chain Drop

Science.gov (United States)

Mungan, Carl E.

2018-05-01

Consider a chain of length L that hangs in a U shape with end A fixed to a rigid support and free end E released from rest starting from the same initial height (call it y = 0) as A. Figure 1 sketches the chain after end E has fallen a distance y. Points O and A are assumed to be close enough to each other and the chain flexible enough that the radius of curvature r at the bottom point C can be taken to be negligibly small (compared to the length of the chain). The problem is to compare the speed of descent v(y) = dy/dt of the free end E of the chain to the speed vfree(y )=√{2 g y } of a free-falling point mass that has descended the same distance y. If v(y) > vfree (y) for all y > 0, then, in a race to fall any arbitrary distance Y (where 0 < Y < L), the chain end E will always beat a simultaneously released point mass, because the fall time t for E will be shorter than tfree for the point mass, t = ∫0 Y d/y v (y ) a "Veritasium" video.

A protein-dependent side-chain rotamer library.

KAUST Repository

Bhuyan, M.S.; Gao, Xin

2011-01-01

Protein side-chain packing problem has remained one of the key open problems in bioinformatics. The three main components of protein side-chain prediction methods are a rotamer library, an energy function and a search algorithm. Rotamer libraries summarize the existing knowledge of the experimentally determined structures quantitatively. Depending on how much contextual information is encoded, there are backbone-independent rotamer libraries and backbone-dependent rotamer libraries. Backbone-independent libraries only encode sequential information, whereas backbone-dependent libraries encode both sequential and locally structural information. However, side-chain conformations are determined by spatially local information, rather than sequentially local information. Since in the side-chain prediction problem, the backbone structure is given, spatially local information should ideally be encoded into the rotamer libraries. In this paper, we propose a new type of backbone-dependent rotamer library, which encodes structural information of all the spatially neighboring residues. We call it protein-dependent rotamer libraries. Given any rotamer library and a protein backbone structure, we first model the protein structure as a Markov random field. Then the marginal distributions are estimated by the inference algorithms, without doing global optimization or search. The rotamers from the given library are then re-ranked and associated with the updated probabilities. Experimental results demonstrate that the proposed protein-dependent libraries significantly outperform the widely used backbone-dependent libraries in terms of the side-chain prediction accuracy and the rotamer ranking ability. Furthermore, without global optimization/search, the side-chain prediction power of the protein-dependent library is still comparable to the global-search-based side-chain prediction methods.

A protein-dependent side-chain rotamer library.

KAUST Repository

Bhuyan, M.S.

2011-12-14

Protein side-chain packing problem has remained one of the key open problems in bioinformatics. The three main components of protein side-chain prediction methods are a rotamer library, an energy function and a search algorithm. Rotamer libraries summarize the existing knowledge of the experimentally determined structures quantitatively. Depending on how much contextual information is encoded, there are backbone-independent rotamer libraries and backbone-dependent rotamer libraries. Backbone-independent libraries only encode sequential information, whereas backbone-dependent libraries encode both sequential and locally structural information. However, side-chain conformations are determined by spatially local information, rather than sequentially local information. Since in the side-chain prediction problem, the backbone structure is given, spatially local information should ideally be encoded into the rotamer libraries. In this paper, we propose a new type of backbone-dependent rotamer library, which encodes structural information of all the spatially neighboring residues. We call it protein-dependent rotamer libraries. Given any rotamer library and a protein backbone structure, we first model the protein structure as a Markov random field. Then the marginal distributions are estimated by the inference algorithms, without doing global optimization or search. The rotamers from the given library are then re-ranked and associated with the updated probabilities. Experimental results demonstrate that the proposed protein-dependent libraries significantly outperform the widely used backbone-dependent libraries in terms of the side-chain prediction accuracy and the rotamer ranking ability. Furthermore, without global optimization/search, the side-chain prediction power of the protein-dependent library is still comparable to the global-search-based side-chain prediction methods.

Integration of vaccine supply chains with other health commodity supply chains: a framework for decision making.

Science.gov (United States)

Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel

2014-11-28

One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developing green supply chain management strategies: A taxonomic approach

Directory of Open Access Journals (Sweden)

Michael Mutingi

2013-06-01

Full Text Available Purpose: The objective of this research is to explore the empirical green supply chain activities found in literature, and to develop a taxonomic framework that can be used for formulating appropriate strategies for green supply chains, based on characteristic dimensions for the green supply chain. Design/methodology/approach: The taxonomic framework is developed through (i analysis of green supply chain activities found in existing empirical work or case studies recorded in literature, (ii identification of key dimensions that influence green supply chain management strategies, and (iii development of a taxonomic scheme for selecting or developing green strategies. Findings: The paper finds that this study yielded: a set of three characteristic dimensions that influence strategic green supply chain management, and a guided structured approach selecting appropriate green strategies, providing managerial insights. Research limitations/implications: This paper shows that future work includes development of specific performance management indices according to the taxonomy of green strategies developed in this study. Practical implications: This research provided a practical guided approach that enhances appropriate formulation of green strategies for green supply chain management, while providing sound managerial insights for the supply chain decision maker. The choice of supply chain strategy directly impacts the overall environmental, economic and operations performance of the supply chain. Originality/value: This study presents to supply chain decision makers a new taxonomic framework that simplifies and enhances the formulation of green strategies, and to researchers a comparative understanding of various strategies applicable to green supply chains.

A conceptual framework for supply chain governance: An application to agri-food chains in China

NARCIS (Netherlands)

Zhang, X.Y.; Aramyan, L.H.

2009-01-01

Purpose - Chinese agri-food chains consist of the millions of small scale farmers, who are not well structured and organized in the supply chain. Owing to market liberalization and globalization, one of the most challenging issues along agri-food chains in China is becoming the issue of how to link

Responsiveness and flexibility in a Decentralized Supply Chain

DEFF Research Database (Denmark)

Petersen, Kristian Rasmus; Bilberg, Arne; Hadar, Ronen

Today’s supply chains are not capable of managing the instabilities that is the case in the market. Instead, there is a need to develop supply chains that are capable of adapting to changes. Through a case study of LEGO, the authors suggest a possible solution: a decentralized supply chain serving...... independent and self-sufficient local factories. The decentralized supply chain is provided with materials, parts and pre-assembled elements from local suppliers and supplies the local market in return. Keywords: Decentralize, Responsiveness, Flexibility...

Interplay between toxin transport and flotillin localization

DEFF Research Database (Denmark)

Pust, Sascha; Dyve, Anne Berit; Torgersen, Maria L

2010-01-01

The flotillin proteins are localized in lipid domains at the plasma membrane as well as in intracellular compartments. In the present study, we examined the importance of flotillin-1 and flotillin-2 for the uptake and transport of the bacterial Shiga toxin (Stx) and the plant toxin ricin and we...... for flotillin-1 or -2. However, the Golgi-dependent sulfation of both toxins was significantly reduced in flotillin knockdown cells. Interestingly, when the transport of ricin to the ER was investigated, we obtained an increased mannosylation of ricin in flotillin-1 and flotillin-2 knockdown cells. The toxicity...... of both toxins was twofold increased in flotillin-depleted cells. Since BFA (Brefeldin A) inhibits the toxicity even in flotillin knockdown cells, the retrograde toxin transport is apparently still Golgi-dependent. Thus, flotillin proteins regulate and facilitate the retrograde transport of Stx and ricin....

Gushing metal chain

Science.gov (United States)

Belyaev, Alexander; Sukhanov, Alexander; Tsvetkov, Alexander

2016-03-01

This article addresses the problem in which a chain falls from a glass from some height. This phenomenon demonstrates a paradoxical rise of the chain over the glass. To explain this effect, an initial hypothesis and an appropriate theory are proposed for calculating the steady fall parameters of the chain. For this purpose, the modified Cayley's problem of falling chain given its rise due to the centrifugal force of upward inertia is solved. Results show that the lift caused by an increase in linear density at the part of chain where it is being bent (the upper part) is due to the convergence of the chain balls to one another. The experiments confirm the obtained estimates of the lifting chain.

The Supply Chain, a Strategic Marketing Approach

Directory of Open Access Journals (Sweden)

Ştefan Claudiu Căescu

2013-02-01

Full Text Available The main objective of this article is to integrate strategic marketing instruments within the supply chain in relationship with the suppliers. In order to integrate the commercial and economic activities at the supply chain level there is a need of developing tight relationships between the customer and the supplier. Thus, it is justified to approach the supply chain from a strategic perspective and the strategic marketing tools are perfectly applicable on the business-to-business market. Our research, has led us to the conclusion that, especially on business to business markets, organizations focus their marketing activities not only on the relationship with their customers, but on the relationship with their suppliers as well. In the supply chain, companies appear as buyers and as clients for the suppliers of goods, financial resources and of work force. Starting from this, we have developed a quantitative marketing research, interviewing 60 organizations from the business-to-business Romanian market, with the purpose of identifying the way in which companies from the B2b market integrate strategic marketing in their supply-chain.

Logistic chain modelling

NARCIS (Netherlands)

Slats, P.A.; Bhola, B.; Evers, J.J.M.; Dijkhuizen, G.

1995-01-01

Logistic chain modelling is very important in improving the overall performance of the total logistic chain. Logistic models provide support for a large range of applications, such as analysing bottlenecks, improving customer service, configuring new logistic chains and adapting existing chains to

Tip stabilizer for a chain saw. Final report

Energy Technology Data Exchange (ETDEWEB)

Morabit, V.D.

1993-09-10

Prior to receiving the grant, Utilitip was faced with an idea that truly worked, however only a very limited line of component parts would fit various types of chain saws on the market. It also suffered from a severe problem when engaged in the ground of soil penetrating the saw chain area, thus eliminating one of the major benefits of keeping the chain sharp. Consequently, the grant funding was directed towards extending the tooling capabilities to produce parts for a much wider variety of chain saws that are on the market, and further by developing an effective flexible soil shield to prevent abrasive soil entry into the saw chain. Utilitip was able to complete a full set of design for a wide variety of large and small chain saws. This incorporated a design and fabrication of a small Utilitip, as well as a small anti-kickback device. In addition, tooling was also further developed for the large Utilitip and the large anti-kickback device. Accordingly, multiple tools are available for all combinations, as well as back-up provisions. Utilitip, Inc. invented a special, flexible attachment to be glued and/or molded to the tip guard. The soil shield prevents abrasive soil from coming into the chain area. In addition, it allows a flexible arrangement to allow the chain saw to be released from brush without binding. Otherwise, a larger, rigid soil shield would hold or restrict the saw in heavy brush. The rubber shield will flex out of the say and reduce, if not eliminate, this harmful binding.

Decisive Markov Chains

OpenAIRE

Abdulla, Parosh Aziz; Henda, Noomene Ben; Mayr, Richard

2007-01-01

We consider qualitative and quantitative verification problems for infinite-state Markov chains. We call a Markov chain decisive w.r.t. a given set of target states F if it almost certainly eventually reaches either F or a state from which F can no longer be reached. While all finite Markov chains are trivially decisive (for every set F), this also holds for many classes of infinite Markov chains. Infinite Markov chains which contain a finite attractor are decisive w.r.t. every set F. In part...

A two-stage value chain model for vegetable marketing chain efficiency evaluation: A transaction cost approach

OpenAIRE

Lu Hualiang

2006-01-01

We applied a two-stage value chain model to investigate the effects of input application and occasional transaction costs on vegetable marketing chain efficiencies with a farm household-level data set. In the first stage, the production efficiencies with the combination of resource endowments, capital and managerial inputs, and production techniques were evaluated; then at the second stage, the marketing technical efficiencies were determined under the marketing value of the vegetables for th...

What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

OpenAIRE

Schwarz, Leroy B.

2008-01-01

A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

A Novel Algorithm for the Generation of Distinct Kinematic Chain

Science.gov (United States)

Medapati, Sreenivasa Reddy; Kuchibhotla, Mallikarjuna Rao; Annambhotla, Balaji Srinivasa Rao

2016-07-01

Generation of distinct kinematic chains is an important topic in the design of mechanisms for various industrial applications i.e., robotic manipulator, tractor, crane etc. Many researchers have intently focused on this area and explained various processes of generating distinct kinematic chains which are laborious and complex. It is desirable to enumerate the kinematic chains systematically to know the inherent characteristics of a chain related to its structure so that all the distinct chains can be analyzed in depth, prior to the selection of a chain for a purpose. This paper proposes a novel and simple method with set of rules defined to eliminate isomorphic kinematic chains generating distinct kinematic chains. Also, this method simplifies the process of generating distinct kinematic chains even at higher levels i.e., 10-link, 11-link with single and multiple degree of freedom.

[Protective effect of Uncaria rhynchophylla total alkaloids pretreatment on hippocampal neurons after acute hypoxia].

Science.gov (United States)

Liu, Wei; Zhang, Zhao-qin; Zhao, Xiao-min; Gao, Yun-sheng

2006-05-01

To investigate the effect of Uncaria rhynchophylla total alkaloids (RTA) pretreatment on the voltage-gated sodium currents of the rat hippocampal neurons after acute hypoxia. Primary cultured hippocampal neurons were divided into RTA pre-treated and non-pretreated groups. Patch clamp whole-cell recording was used to compare the voltage-gated sodium current amplitude and threshold with those before hypoxia. After acute hypoxia, sodium current amplitude was significantly decreased and its threshold was upside. RTA pretreatment could inhibit the reduction of sodium current amplitude. RTA pretreatment alleviates the acute hypoxia-induced change of sodium currents, which may be one of the mechanisms for protective effect of RTA on cells.

One long chain among shorter chains : the Flory approach revisited

OpenAIRE

Raphaël , E.; Fredrickson , G.; Pincus , P.

1992-01-01

We consider the mean square end-to-end distance of a long chain immersed in a monodisperse, concentrated solution of shorter, chemically identical chains. In contrast with the earlier work of Flory, no simplifying assumption on the wave vector dependence of the effective potential between segments is made. In order to obtain a closed form expression for the dimension of the long chain, we first derive a general expression for the mean square end-to-end distance of a flexible chain with arbitr...

Multi-chain Markov chain Monte Carlo methods for computationally expensive models

Science.gov (United States)

Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

2017-12-01

Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

Green supply chains: a new priority for supply chain managers

CSIR Research Space (South Africa)

Ittmann, H

2011-01-01

Full Text Available This article is not a comprehensive overview of green logistics. What it endeavours to do is to sensitise, in a very summarised way, those involved in logistics and supply chain management about the importance of green logistics and to highlight...

Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

OpenAIRE

Patalinghug, Epictetus E.

2015-01-01

Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

Effects of vacuum rapid thermal annealing on the electrical characteristics of amorphous indium gallium zinc oxide thin films

Science.gov (United States)

Lee, Hyun-Woo; Cho, Won-Ju

2018-01-01

We investigated the effects of vacuum rapid thermal annealing (RTA) on the electrical characteristics of amorphous indium gallium zinc oxide (a-IGZO) thin films. The a-IGZO films deposited by radiofrequency sputtering were subjected to vacuum annealing under various temperature and pressure conditions with the RTA system. The carrier concentration was evaluated by Hall measurement; the electron concentration of the a-IGZO film increased and the resistivity decreased as the RTA temperature increased under vacuum conditions. In a-IGZO thin-film transistors (TFTs) with a bottom-gate top-contact structure, the threshold voltage decreased and the leakage current increased as the vacuum RTA temperature increased. As the annealing pressure decreased, the threshold voltage decreased, and the leakage current increased. X-ray photoelectron spectroscopy indicated changes in the lattice oxygen and oxygen vacancies of the a-IGZO films after vacuum RTA. At higher annealing temperatures, the lattice oxygen decreased and oxygen vacancies increased, which suggests that oxygen was diffused out in a reduced pressure atmosphere. The formation of oxygen vacancies increased the electron concentration, which consequently increased the conductivity of the a-IGZO films and reduced the threshold voltage of the TFTs. The results showed that the oxygen vacancies and electron concentrations of the a-IGZO thin films changed with the vacuum RTA conditions and that high-temperature RTA treatment at low pressure converted the IGZO thin film to a conductor.

Branched-chain fatty acid biosynthesis in a branched-chain amino acid aminotransferase mutant of Staphylococcus carnosus

DEFF Research Database (Denmark)

Beck, Hans Christian

2005-01-01

Fatty acid biosynthesis by a mutant strain of Staphylococcus carnosus deficient in branched-chain amino acid aminotransferase (IlvE) activity was analysed. This mutant was unable to produce the appropriate branched-chain alpha-ketoacid precursors for branched-chain fatty acid biosynthesis from...... in rich medium and growth in defined medium supplemented with 2-methylpropanoic acid lead to extensive alteration of the fatty acid composition in the cell membrane. In rich medium, a change from 51.7% to 17.1% anteiso-C15:0, and from 3.6% to 33.9% iso-C14:0 fatty acids as compared to the wild-type strain...... for 2-methylpropanoic acid production, revealing that the IlvE protein plays an important, but not essential role in the biosynthesis of branched-chain fatty acids and secondary metabolites in S. carnosus....

Abnormal distal renal tubular acidification in patients with low bone mass: prevalence and impact of alkali treatment.

Science.gov (United States)

Sromicki, Jerzy Jan; Hess, Bernhard

2017-06-01

Chronic acid retention is known to promote bone dissolution. In this study, 23 % of patients with osteopenia/osteoporosis were diagnosed with abnormal distal renal tubular acidification (dRTA), a kidney dysfunction leading to chronic acid retention. Treating those patients with alkali-therapy shows improvement in bone density. To evaluate the prevalence of abnormal distal renal tubular acidification in patients with low bone mass (LBM) and the impact of additional alkali treatment on bone density in patients with concomitant LBM and dRTA,183 patients referred for metabolic evaluation of densitometrically proven low bone mass were screened for abnormal distal renal tubular acidification between 2006 and 2013. In all LBM urine pH (U-pH) was measured in the 2nd morning urines after 12 h of fasting. If U-pH was ≥5.80, LBM underwent a 1-day ammonium chloride loading, and U-pH was remeasured the next morning. If U-pH after acid loading did not drop below 5.45, patients were diagnosed with abnormal distal renal tubular acidification. Normal values were obtained from 21 healthy controls. All LBM with dRTA were recommended alkali citrate in addition to conventional therapy of LBM, and follow-up DXAs were obtained until 2014. 85 LBM underwent NH 4 Cl loading. 42 LBM patients were diagnosed with incomplete dRTA (idRTA; prevalence 23.0 %). During follow-up (1.6-8 years) of idRTA-LBM patients, subjects adhering to alkali treatment tended to improve BMD at all sites measured, whereas BMD of non-adherent idRTA patients worsened/remained unchanged. (1) About one out of four patients with osteopenia/osteoporosis has idRTA. (2) Upon NH 4 Cl loading, idRTA patients do not lower urine pH normally, but show signs of increased acid-buffering by bone dissolution. (3) In idRTA patients with low bone mass on conventional therapy, additional long-term alkali treatment improves bone mass at lumbar spine and potentially at other bone sites. (4) All patients with low bone mass undergoing

Transport properties of a ladder with two random dimer chains

International Nuclear Information System (INIS)

Hu Dong-Sheng; Zhu Chen-Ping; Zhang Yong-Mei

2011-01-01

We investigate the transport properties of a ladder with two random dimer (RD) chains. It is found that there are two extended states in the ladder with identical RD chains and a critical state regarded as an extended state in the ladder with pairing RD chains. Such a critical state is caused by the chiral symmetry. The ladder with identical RD chains can be decoupled into two isolated RD chains and the ladder with pairing RD chains can not. The analytic expressions of the extended states are presented for the ladder with identical RD chains. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Platelet-derived growth factor (PDGF) B-chain gene expression by activated blood monocytes precedes the expression of the PDGF A-chain gene

International Nuclear Information System (INIS)

Martinet, Y.; Jaffe, H.A.; Yamauchi, K.; Betsholtz, C.; Westermark, B.; Heldin, C.H.; Crystal, R.G.

1987-01-01

When activated, normal human blood monocytes are known to express the c-sis proto-oncogene coding for PDGF B-chain. Since normal human platelet PDGF molecules are dimers of A and B chains and platelets and monocytes are derived from the same marrow precursors, activated blood monocytes were simultaneously evaluated for their expression of PDGF A and B chain genes. Human blood monocytes were purified by adherence, cultured with or without activation by lipopolysaccharide and poly(A)+ RNA evaluated using Northern analysis and 32 P-labeled A-chain and B-chain (human c-sis) probes. Unstimulated blood monocytes did not express either A-chain or B-chain genes. In contrast, activated monocytes expressed a 4.2 kb mRNA B-chain transcript at 4 hr, but the B-chain mRNA levels declined significantly over the next 18 hr. In comparison, activated monocytes expressed very little A-chain mRNA at 4 hr, but at 12 hr 1.9, 2.3, and 2.8 kb transcripts were observed and persisted through 24 hr. Thus, activation of blood monocytes is followed by PDGF B-chain gene expression preceding PDGF A-chain gene expression, suggesting a difference in the regulation of the expression of the genes for these two chains by these cells

Sustainable Supply Chain Engagement in a Retail Environment

Directory of Open Access Journals (Sweden)

Anika Berning

2015-05-01

Full Text Available Sustainability is a key requirement for business success and is often regarded a competitive advantage if strategically managed. Sustainability-mature organisations look to their value chains where the retailer-supplier collaboration becomes critical in embedding sustainability. With this in mind, it is important to monitor retailer-supplier collaboration to determine whether it is effective. To facilitate this monitoring, the UN Global Compact Supply Chain Sustainability: A Guide for Continuous Improvement was consulted. The research question aimed to determine the progress of a prominent South African retailer regarding their sustainable supply chain management (SSCM and collaboration with suppliers. Therefore, this study attempts to apply the Supplier Engagement Continuum, extracted from the UN Global Compact Supply Chain Sustainability: A Guide for Continuous Improvement, in order to determine how the retailer is progressing in sustainable supply chain management. The qualitative and exploratory nature of the study necessitated a case study research design, while the technique of purposive sampling was used to select the sample of three suppliers. Data was collected by means of semi-structured interviews facilitated by an interview guide, and data analysis was conducted with Atlas.ti software. It was found that the retailer’s sustainable supply chain management can only be located on level one of the continuum. Supply chain sustainability in organisations lack the theoretical foundation of what sustainability really is. Therefore, the model was amended and an additional level was added to incorporate the education of sustainability.

A modeling framework for supply chain simulation

NARCIS (Netherlands)

van der Zee, D.J.; van der Vorst, J.G.A.J.

2002-01-01

In many industries logistic optimization on a company scale is no longer sufficient to meet the competition. Nowadays, competition takes place between supply chains. Intrinsic to the concept and success of a supply chain is the tuning of the activities of the companies involved. Given the complexity

A maturity model for industrial supply chains

NARCIS (Netherlands)

Hameri, A.P.; McKay, K.N.; Wiers, V.C.S.

2013-01-01

This article takes an evolutionary view of supply chains to suggest a series of distinct, contextual phases for supply chain execution and what maturity might mean at each phase. For example, what is best practice in a mature industry might not be best practice in a pioneering situation.Three

Supply chain design approaches for supply chain resilience: A qualitative study of South African fast-moving consumer goods grocery manufacturers

OpenAIRE

Assilah Agigi; Wesley Niemann; Theuns Kotzé

2016-01-01

Orientation: In today’s globalised and complex business environment, firms are ever more vulnerable to supply chain disruptions, originating both internally and externally from the supply chain. Supply chain resilience minimises the impact of a disruption through design approaches, which allows the supply chain to respond appropriately to disruptive events. Research purpose: This article investigated the supply chain risks faced by grocery manufacturers in the South African fast-moving co...

Lean Supply Chain Planning: A Performance Evaluation through Simulation

Directory of Open Access Journals (Sweden)

Rossini Matteo

2016-01-01

Full Text Available Nowadays companies look more and more for improving their efficiency to excel in the market. At the same time, the competition has moved from firm level to whole supply chain level. Supply chain are very complex systems and lacks of coordination among their members leads to inefficiency. Supply chain planning task is to improve coordination among supply chain members. Which is the best planning solution to improve efficiency is an open issue. On the other hand, Lean approach is becoming more and more popular among managers. Lean approach is recognize as efficiency engine for production systems, but effects of Lean implementation out of single firm boundaries is not clear. This paper aims at providing a theoretical and practical starting point for Lean implementation in supply chain planning issue. To reach it, a DES simulation model of a three-echelon and multi-product supply chain has been set. Lean management is a very broad topic and this paper focuses on two principles of “pull” and “create the flow”. Kanban system and setup-time and batch-size reductions are implemented in the lean-configured supply chain to apply “pull” and “create the flow” respectively. Lean principles implementations have been analyzed and compared with other supply chain planning policies: EOQ and information sharing (Visibility. Supported by the simulation study, this paper points Lean supply chain planning is a competitive planning policies to increase efficiency.

A targeted metabolomic protocol for short-chain fatty acids and branched-chain amino acids

OpenAIRE

Zheng, Xiaojiao; Qiu, Yunping; Zhong, Wei; Baxter, Sarah; Su, Mingming; Li, Qiong; Xie, Guoxiang; Ore, Brandon M.; Qiao, Shanlei; Spencer, Melanie D.; Zeisel, Steven H.; Zhou, Zhanxiang; Zhao, Aihua; Jia, Wei

2013-01-01

Research in obesity and metabolic disorders that involve intestinal microbiota demands reliable methods for the precise measurement of the short-chain fatty acids (SCFAs) and branched-chain amino acids (BCAAs) concentration. Here, we report a rapid method of simultaneously determining SCFAs and BCAAs in biological samples using propyl chloroformate (PCF) derivatization followed by gas chromatography mass spectrometry (GC-MS) analysis. A one-step derivatization using 100 µL of PCF in a reactio...

Needed: a strategic approach to supply chain management.

Science.gov (United States)

Kowalski, Jamie C

2009-06-01

When devising a supply chain strategic plan, consider these points: Frame the supply chain broadly to include all possible components and expenses. Recognize how each part of the supply chain affects other parts. Engage all parties and customers in strategic discussions. Educate all involved. Objectively assess the current state. Visualize an unencumbered future state. Quantify quality, productivity, and financial goals.

Coordinating a Two-Echelon Supply Chain under Carbon Tax

Directory of Open Access Journals (Sweden)

Wei Yu

2017-12-01

Full Text Available In this paper, we study the impact of carbon tax on carbon emission and retail price in a two-echelon supply chain consisting of a manufacturer and a retailer. Specifically, by adopting two types of contracts, i.e., the modified wholesale price (MW and the modified cost-sharing contract (MS, supply chain coordination is achieved, which promotes the supply chain efficiency. Our study shows that: (1 with the increase of carbon tax, both the optimal emission reduction level and the optimal retail price increase, and then keep unchanged; (2 neither MW nor MS benefits the manufacturer after the supply chain coordination; and (3 to effectively coordinate the supply chain, we propose an innovative supply chain contract that integrates the firms’ optimal decisions under MW or MS with a two part tariff contract (TPT and a fixed fee the retailer can pay to ensure a win–win solution.

Assessing responsiveness of a volatile and seasonal supply chain

DEFF Research Database (Denmark)

Wong, Chee Yew; Arlbjørn, Jan Stentoft; Hvolby, Hans Henrik

2006-01-01

‘‘market responsive’’ and ‘‘physically efficient’’ supply chains constitutes the backbone of this assessment. Four risk-influencing determinants—forecast uncertainty, demand variability, contribution margin, and time window of delivery are found suitable to assess the responsiveness of the toy supply chain......This paper describes a structural approach to assess the responsiveness of a volatile and seasonal supply chain. It is based on a case study in an international toy company. Fisher’s (Harvard Bus. Rev. 75(2) (1997) 105–117) Model of ‘‘innovative’’ and ‘‘functional’’ products and the corresponding...... with volatility, and to design for a responsive supply chain. These findings have also enabled the extension of Fisher’s Model to volatile supply chains. This new product differentiation model adds a physically responsive supply chain for ‘‘intermediate’’ products into the Fisher’s Model....

Determining chain digitisation maturity: a survey among Dutch CIOs.

NARCIS (Netherlands)

Plomp, M.G.A.; Batenburg, R.S.; Rooij, R.C.M. van

2012-01-01

Interorganisational or chain information systems have become a frequent subject of scientific research, but not often an empirical perspective on these systems is taken. In this study we develop a model for measuring the chain digitisation maturity of organisations (as a proxy for chains) and

ZnO nanorod arrays prepared by chemical bath deposition combined with rapid thermal annealing: structural, photoluminescence and field emission characteristics

International Nuclear Information System (INIS)

Chen, Hung-Wei; He, Hsin-Min; Lee, Yi-Mu; Yang, Hsi-Wen

2016-01-01

ZnO nanorod arrays were prepared by low temperature chemical bath deposition (CBD) combined with rapid thermal annealing (RTA) under different ambient conditions. The structure and morphology of the synthesized ZnO have been characterized by field-emission scanning electron microscopy (FESEM) and x-ray diffraction (XRD). The obtained ZnO samples are highly crystalline with a hexagonal wurtzite phase and also display well-aligned array structure. A pronounced effect on increased nanorod length was found for the RTA-treated ZnO as compared to the as-grown ZnO. Analysis of XRD indicates that the (0 0 2) feature peak of the as-grown ZnO was shifted towards a lower angle as compared to the peaks of RTA-treated ZnO samples due to the reduction of tensile strain along the c-axis by RTA. Photoluminescence (PL) studies reveal that the ZnO nanorod arrays receiving RTA in an O 2 environment have the sharpest UV emission band and greatest intensity ratio of near band-edge emission (NBE) to deep level emission (DLE). Additionally, the effects of RTA on the field emission properties were evaluated. The results demonstrate that RTA an O 2 environment can lower the turn-on field and improve the field enhancement factor. The stability of the field emission current was also tested for 4 h. (paper)

Rhynchophylla total alkaloid rescues autophagy, decreases oxidative stress and improves endothelial vasodilation in spontaneous hypertensive rats.

Science.gov (United States)

Li, Chao; Jiang, Feng; Li, Yun-Lun; Jiang, Yue-Hua; Yang, Wen-Qing; Sheng, Jie; Xu, Wen-Juan; Zhu, Qing-Jun

2018-03-01

Autophagy plays an important role in alleviating oxidative stress and stabilizing atherosclerotic plaques. However, the potential role of autophagy in endothelial vasodilation function has rarely been studied. This study aimed to investigate whether rhynchophylla total alkaloid (RTA) has a positive role in enhancing autophagy through decreasing oxidative stress, and improving endothelial vasodilation. In oxidized low-density lipoprotein (ox-LDL)-treated human umbilical vein endothelial cells (HUVECs), RTA (200 mg/L) significantly suppressed ox-LDL-induced oxidative stress through rescuing autophagy, and decreased cell apoptosis. In spontaneous hypertensive rats (SHR), administration of RTA (50 mg·kg -1 ·d -1 , ip, for 6 weeks) improved endothelin-dependent vasodilation of thoracic aorta rings. Furthermore, RTA administration significantly increased the antioxidant capacity and alleviated oxidative stress through enhancing autophagy in SHR. In ox-LDL-treated HUVECs, we found that the promotion of autophagy by RTA resulted in activation of the AMP-activated protein kinase (AMPK) signaling pathway. Our results show that RTA treatment rescues the ox-LDL-induced autophagy impairment in HUVECs and improves endothelium-dependent vasodilation function in SHR.

Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

OpenAIRE

Radanliev, Petar

2015-01-01

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

Diode characteristics and residual deep-level defects of p+n abrupt junctions fabricated by rapid thermal annealing of boron implanted silicon

International Nuclear Information System (INIS)

Usami, A.; Katayama, M.; Wada, T.; Tokuda, Y.

1987-01-01

p + n diodes were fabricated by rapid thermal annealing (RTA) of boron implanted silicon in the annealing temperature range 700-1100 0 C for around 7 s, and the RTA temperature dependence of electrical characteristics of these diodes was studied. Deep-level transient spectroscopy (DLTS) measurements were made to evaluate residual deep-level defects in the n-type bulk. Three electron traps were observed in p + n diodes fabricated by RTA at 700 0 C. It was considered that these three traps were residual point defects near the tail of the implantation damage after RTA. Residual defect concentrations increased in the range 700-900 0 C and decreased in the range 1000-1100 0 C. The growth of defects in the bulk was ascribed to the diffusion of defects from the implanted layer during RTA. Concentrations of electron traps observed in p + n diodes fabricated by RTA at 1100 0 C were approx. 10 12 cm -3 . It was found that these residual deep-level defects observed by DLTS were inefficient generation-recombination centres since the reverse current was independent of the RTA temperatures. (author)

Many-body formation and dissociation of a dipolar chain crystal

International Nuclear Information System (INIS)

You, Jhih-Shih; Wang, Daw-Wei

2014-01-01

We propose an experimental scheme to effectively assemble chains of dipolar gases with a uniform length in a multi-layer system. The obtained dipolar chains can form a chain crystal with the system temperature easily controlled by the initial lattice potential and the external field strength during processing. When the density of chains increases, we further observe a second order quantum phase transition for the chain crystal to be dissociated toward layers of 2D crystal, where the quantum fluctuation dominates the classical energy and the compressibility diverges at the phase boundary. The experimental implication of such a dipolar chain crystal and its quantum phase transition is also discussed. (paper)

A Research Agenda on Data Supply Chains (DSC)

OpenAIRE

Spanaki, K; Adams, R; Mulligan, C; Lupu, E

2016-01-01

Competition among organizations supports initiatives and collaborative use of data while creating value based on the strategy and best performance of each data supply chain. Supporting this direction, and building on the theoretical background of the supply chain, we propose the Data Supply Chain (DSC) as a novel concept to aid investigations for data-driven collaboration impacting organizational performance. In this study we initially propose a definition for the DSC paying particular attent...

Enhancement of Intranasal Vaccination in Mice with Deglycosylated Chain A Ricin by LTR72, a Novel Mucosal Adjuvant

National Research Council Canada - National Science Library

Kende, Meir; Del Giudice, Giuseppe; Rivera, Noelia; Hewetson, John

2006-01-01

.... However, in the presence of 4, 2, or 1 microg of the mucosal adjuvant LTR72, a mutant of the heat-labile enterotoxin of Escherichia coli, the low antibody response and protection were substantially enhanced...

Enhancement of Intranasal Vaccination in Mice with Deglycosylated Chain A Ricin by LTR72, a Novel Mucosal Adjuvant

National Research Council Canada - National Science Library

Kende, Meir; Del Giudice, Giuseppe; Rivera, Noelia; Hewetson, John

2006-01-01

.... However, in the presence of 4, 2, or 1 micro-gram of the mucosal adjuvant LTR72, a mutant of the heat-labile enterotoxin of Escherichia coli, the low antibody response and protection were substantially enhanced...

SdAb heterodimer formation using leucine zippers

Science.gov (United States)

Goldman, Ellen R.; Anderson, George P.; Brozozog-Lee, P. Audrey; Zabetakis, Dan

2013-05-01

Single domain antibodies (sdAb) are variable domains cloned from camel, llama, or shark heavy chain only antibodies, and are among the smallest known naturally derived antigen binding fragments. SdAb derived from immunized llamas are able to bind antigens with high affinity, and most are capable of refolding after heat or chemical denaturation to bind antigen again. We hypothesized that the ability to produce heterodimeric sdAb would enable reagents with the robust characteristics of component sdAb, but with dramatically improved overall affinity through increased avidity. Previously we had constructed multimeric sdAb by genetically linking sdAb that bind non-overlapping epitopes on the toxin, ricin. In this work we explored a more flexible approach; the construction of multivalent binding reagents using multimerization domains. We expressed anti-ricin sdAb that recognize different epitopes on the toxin as fusions with differently charged leucine zippers. When the initially produced homodimers are mixed the leucine zipper domains will pair to produce heterodimers. We used fluorescence resonance energy transfer to confirm heterodimer formation. Surface plasmon resonance, circular dichroism, enzyme linked immunosorbent assays, and fluid array assays were used to characterize the multimer constructs, and evaluate their utility in toxin detection.

Power-law creep behavior of a semiflexible chain.

Science.gov (United States)

Majumdar, Arnab; Suki, Béla; Rosenblatt, Noah; Alencar, Adriano M; Stamenović, Dimitrije

2008-10-01

Rheological properties of adherent cells are essential for their physiological functions, and microrheological measurements on living cells have shown that their viscoelastic responses follow a weak power law over a wide range of time scales. This power law is also influenced by mechanical prestress borne by the cytoskeleton, suggesting that cytoskeletal prestress determines the cell's viscoelasticity, but the biophysical origins of this behavior are largely unknown. We have recently developed a stochastic two-dimensional model of an elastically joined chain that links the power-law rheology to the prestress. Here we use a similar approach to study the creep response of a prestressed three-dimensional elastically jointed chain as a viscoelastic model of semiflexible polymers that comprise the prestressed cytoskeletal lattice. Using a Monte Carlo based algorithm, we show that numerical simulations of the chain's creep behavior closely correspond to the behavior observed experimentally in living cells. The power-law creep behavior results from a finite-speed propagation of free energy from the chain's end points toward the center of the chain in response to an externally applied stretching force. The property that links the power law to the prestress is the chain's stiffening with increasing prestress, which originates from entropic and enthalpic contributions. These results indicate that the essential features of cellular rheology can be explained by the viscoelastic behaviors of individual semiflexible polymers of the cytoskeleton.

Sustainable Supply Chain Design

DEFF Research Database (Denmark)

Bals, Lydia; Tate, Wendy

A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

Detection of defect states responsible for leakage current in ultrathin tantalum pentoxide (Ta2O5) films by zero-bias thermally stimulated current spectroscopy

International Nuclear Information System (INIS)

Lau, W.S.; Zhong, L.; Lee, A.; See, C.H.; Han, T.; Sandler, N.P.; Chong, T.C.

1997-01-01

Defect states responsible for leakage current in ultrathin (physical thickness 2 O 5 ) films were measured with a novel zero-bias thermally stimulated current technique. It was found that defect states A, whose activation energy was estimated to be about 0.2 eV, can be more efficiently suppressed by using N 2 O rapid thermal annealing (RTA) instead of using O 2 RTA for postdeposition annealing. The leakage current was also smaller for samples with N 2 O RTA than those with O 2 RTA for postdeposition annealing. Hence, defect states A are quite likely to be important in causing leakage current. copyright 1997 American Institute of Physics

Wal-Mart's Successfully Integrated Supply Chain and the Necessity of Establishing the Triple-A supply Chain in the 21st century

OpenAIRE

Ha Nguyen Thi Thu

2017-01-01

Aim/purpose - The main purposes of the paper are to analyze features creating a Wal-Mart's successful integrated supply chain that contributes its dominant position in the retail market and identify issues existing in Wal-Mart's supply chain. Then some suggestions will be mentioned for Wal-Mart to establish the Triple-A supply chain. Methodology - This paper is based on literature studies for reviewing Wal-Mart's integrated supply chain and designing an ideal Triple-A supply chain. Findings -...

A New Resilience Measure for Supply Chain Networks

Directory of Open Access Journals (Sweden)

Ruiying Li

2017-01-01

Full Text Available Currently, supply chain networks can span the whole world, and any disruption of these networks may cause economic losses, decreases in sales and unsustainable supplies. Resilience, the ability of the system to withstand disruption and return to a normal state quickly, has become a new challenge during the supply chain network design. This paper defines a new resilience measure as the ratio of the integral of the normalized system performance within its maximum allowable recovery time after the disruption to the integral of the performance in the normal state. Using the maximum allowable recovery time of the system as the time interval under consideration, this measure allows the resilience of different systems to be compared on the same relative scale, and be used under both scenarios that the system can or cannot restore in the given time. Two specific resilience measures, the resilience based on the amount of product delivered and the resilience based on the average delivery distance, are provided for supply chain networks. To estimate the resilience of a given supply chain network, a resilience simulation method is proposed based on the Monte Carlo method. A four-layered hierarchial mobile phone supply chain network is used to illustrate the resilience quantification process and show how network structure affects the resilience of supply chain networks.

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain.

Science.gov (United States)

Lee, Yumi; Song, Sang Hwa; Cheong, Taesu

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company's sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers.

Effects of vacuum rapid thermal annealing on the electrical characteristics of amorphous indium gallium zinc oxide thin films

Directory of Open Access Journals (Sweden)

Hyun-Woo Lee

2018-01-01

Full Text Available We investigated the effects of vacuum rapid thermal annealing (RTA on the electrical characteristics of amorphous indium gallium zinc oxide (a-IGZO thin films. The a-IGZO films deposited by radiofrequency sputtering were subjected to vacuum annealing under various temperature and pressure conditions with the RTA system. The carrier concentration was evaluated by Hall measurement; the electron concentration of the a-IGZO film increased and the resistivity decreased as the RTA temperature increased under vacuum conditions. In a-IGZO thin-film transistors (TFTs with a bottom-gate top-contact structure, the threshold voltage decreased and the leakage current increased as the vacuum RTA temperature increased. As the annealing pressure decreased, the threshold voltage decreased, and the leakage current increased. X-ray photoelectron spectroscopy indicated changes in the lattice oxygen and oxygen vacancies of the a-IGZO films after vacuum RTA. At higher annealing temperatures, the lattice oxygen decreased and oxygen vacancies increased, which suggests that oxygen was diffused out in a reduced pressure atmosphere. The formation of oxygen vacancies increased the electron concentration, which consequently increased the conductivity of the a-IGZO films and reduced the threshold voltage of the TFTs. The results showed that the oxygen vacancies and electron concentrations of the a-IGZO thin films changed with the vacuum RTA conditions and that high-temperature RTA treatment at low pressure converted the IGZO thin film to a conductor.

Ricin

Science.gov (United States)

... Marburg virus hemorrhagic fever Melioidosis ( Burkholderia pseudomallei ) Plague ( Yersinia pestis ) FAQ About Plague (as a bioweapon) Facts About ... Ebola, Marburg] and arenaviruses [e.g., Lassa, Machupo]) Yersinia pestis (plague) Fact Sheets Case Definitions Training Surveillance Preparation & ...

Green supply chain management : a study of green supply chain management within the pulp and paper industry

OpenAIRE

Anker-Rasch, Trine-Lise; Sørgard, Siri Daviknes

2011-01-01

The objective of this thesis is to create a framework that can be used by supply chains, in particular supply chains from the pulp and paper industry, to identify internal strengths and weaknesses and external opportunities and threats to develop environmental strategies. To identify which questions to use in the environmental strategy framework, we first identified the environmental picture which the pulp and paper industry is facing. We then used this and the theory of green supply chain...

CHAIN 2

International Nuclear Information System (INIS)

Bailey, D.

1998-04-01

The Second Processing Chain (CHAIN2) consists of a suite of ten programs which together provide a full local analysis of the bulk plasma physics within the JET Tokamak. In discussing these ten computational models this report is intended to fulfil two broad purposes. Firstly it is meant to be used as a reference source for any user of CHAIN2 data, and secondly it provides a basic User Manual sufficient to instruct anyone in running the CHAIN2 suite of codes. In the main report text each module is described in terms of its underlying physics and any associated assumptions or limitations, whilst deliberate emphasis is put on highlighting the physics and mathematics of the calculations required in deriving each individual datatype in the standard module PPF output. In fact each datatype of the CHAIN2 PPF output listed in Appendix D is cross referenced to the point in the main text where its evaluation is discussed. An effort is made not only to give the equation used to derive a particular data profile but also to explicitly define which external data sources are involved in the computational calculation

Supply Chain Sustainability: a Retailer Perspective

OpenAIRE

ROWELL, James

2011-01-01

Since the publication of 'The Greening of Wal-Mart's Supply Chain' (Plambeck, 2007) the subject of sustainability has gained a clear focus in organisations' supply chain activities. (The Sustainable Business, EFMD, 2010) In fact the 2007 paper reported on Walmart's ambitions as outlined by CEO Lee Scott, in 2005. That plan was titled Sustainability 360. Based on information published by Walmart since 2007, this article discusses the organisational context of these initiatives and focuses on t...

Novel scenario of the folding transition of a single chain

International Nuclear Information System (INIS)

Yoshikawa, Kenichi; Yoshinaga, Natsuhiko

2005-01-01

Unique characteristics of a single polymer chain with the effects of stiffness and charge are discussed. It has been well established that a flexible polymer chain undergoes a continuous transition from an elongated coil to a compact globule, corresponding to the transition between disordered gas-like and disordered liquid-like states. Here, we will show that a semiflexible chain exhibits a discrete transition from coil to compact states, corresponding to a disorder-order transition to an ordered crystalline state. We will propose a novel strategy to obtain various kinds of nano-ordered structures from single chains connecting a pair of chains of different stiffness. We will also discuss the effect of charge, putting emphasis on intramolecular segregation in a single polyelectrolyte chain

A semiflexible alternating copolymer chain adsorption on a flat and a fluctuating surface

International Nuclear Information System (INIS)

Mishra, Pramod Kumar

2010-01-01

A lattice model of a directed self-avoiding walk is used to investigate adsorption properties of a semiflexible alternating copolymer chain on an impenetrable flat and fluctuating surface in two (square, hexagonal and rectangular lattice) and three dimensions (cubic lattice). In the cubic lattice case the surface is two-dimensional impenetrable flat and in two dimensions the surface is a fluctuating impenetrable line (hexagonal lattice) and also flat impenetrable line (square and rectangular lattice). Walks of the copolymer chains are directed perpendicular to the plane of the surface and at a suitable value of monomer surface attraction, the copolymer chain gets adsorbed on the surface. To calculate the exact value of the monomer surface attraction, the directed walk model has been solved analytically using the generating function method to discuss results when one type of monomer of the copolymer chain has attractive, repulsive or no interaction with the surface. Results obtained in the flat surface case show that, for a stiffer copolymer chain, adsorption transition occurs at a smaller value of monomer surface attraction than a flexible copolymer chain while in the case of a fluctuating surface, the adsorption transition point is independent of bending energy of the copolymer chain. These features are similar to that of a semiflexible homopolymer chain adsorption.

A semiflexible alternating copolymer chain adsorption on a flat and a fluctuating surface.

Science.gov (United States)

Mishra, Pramod Kumar

2010-04-21

A lattice model of a directed self-avoiding walk is used to investigate adsorption properties of a semiflexible alternating copolymer chain on an impenetrable flat and fluctuating surface in two (square, hexagonal and rectangular lattice) and three dimensions (cubic lattice). In the cubic lattice case the surface is two-dimensional impenetrable flat and in two dimensions the surface is a fluctuating impenetrable line (hexagonal lattice) and also flat impenetrable line (square and rectangular lattice). Walks of the copolymer chains are directed perpendicular to the plane of the surface and at a suitable value of monomer surface attraction, the copolymer chain gets adsorbed on the surface. To calculate the exact value of the monomer surface attraction, the directed walk model has been solved analytically using the generating function method to discuss results when one type of monomer of the copolymer chain has attractive, repulsive or no interaction with the surface. Results obtained in the flat surface case show that, for a stiffer copolymer chain, adsorption transition occurs at a smaller value of monomer surface attraction than a flexible copolymer chain while in the case of a fluctuating surface, the adsorption transition point is independent of bending energy of the copolymer chain. These features are similar to that of a semiflexible homopolymer chain adsorption.

Hotel chains: survival strategies for a dynamic future

Directory of Open Access Journals (Sweden)

Brendan Richard

2017-04-01

Full Text Available Purpose – The purpose of this paper is to better understand the future of hotel chains by exploring the evolving expectations of guests, potential innovations, emerging opportunities, and likely future scenarios. Design/methodology/approach – A literature review consisting of current events, industry reports, and recent trends is utilized to summarize and categorize the challenges and opportunities facing hotel chains. Findings – The future of hotel chains will be driven by the convergence of an increasingly competitive landscape, along with a diverse evolving customer base seeking out unique and individualized experiences. In order to survive in the future hotel chains will have to: listen to and learn from guests incorporating big data insights, go beyond segments to provide personalized services, continuously develop the brand through signature experiences, utilize collaboration and open innovation to maintain an edge in technology and service, and through total revenue management generate ancillary revenues and maximize guest spend. Originality/value – This paper provides a comprehensive set of recommendations to hotel chains highlighting opportunities related to: financing, revenue generation, personalization, and co-creation.

A tactical supply chain planning model with multiple flexibility options

DEFF Research Database (Denmark)

Esmaeilikia, Masoud; Fahimnia, Behnam; Sarkis, Joeseph

2016-01-01

Supply chain flexibility is widely recognized as an approach to manage uncertainty. Uncertainty in the supply chain may arise from a number of sources such as demand and supply interruptions and lead time variability. A tactical supply chain planning model with multiple flexibility options...... incorporated in sourcing, manufacturing and logistics functions can be used for the analysis of flexibility adjustment in an existing supply chain. This paper develops such a tactical supply chain planning model incorporating a realistic range of flexibility options. A novel solution method is designed...

Hotel chains: survival strategies for a dynamic future

OpenAIRE

Brendan Richard

2017-01-01

Purpose – The purpose of this paper is to better understand the future of hotel chains by exploring the evolving expectations of guests, potential innovations, emerging opportunities, and likely future scenarios. Design/methodology/approach – A literature review consisting of current events, industry reports, and recent trends is utilized to summarize and categorize the challenges and opportunities facing hotel chains. Findings – The future of hotel chains will be driven by the convergence of...

A Supply Chain Design Problem Integrated Facility Unavailabilities Management

Directory of Open Access Journals (Sweden)

Fouad Maliki

2016-08-01

Full Text Available A supply chain is a set of facilities connected together in order to provide products to customers. The supply chain is subject to random failures caused by different factors which cause the unavailability of some sites. Given the current economic context, the management of these unavailabilities is becoming a strategic choice to ensure the desired reliability and availability levels of the different supply chain facilities. In this work, we treat two problems related to the field of supply chain, namely the design and unavailabilities management of logistics facilities. Specifically, we consider a stochastic distribution network with consideration of suppliers' selection, distribution centres location (DCs decisions and DCs’ unavailabilities management. Two resolution approaches are proposed. The first approach called non-integrated consists on define the optimal supply chain structure using an optimization approach based on genetic algorithms (GA, then to simulate the supply chain performance with the presence of DCs failures. The second approach called integrated approach is to consider the design of the supply chain problem and unavailabilities management of DCs in the same model. Note that, we replace each unavailable DC by performing a reallocation using GA in the two approaches. The obtained results of the two approaches are detailed and compared showing their effectiveness.

Investigation of Near-Surface Defects Induced by Spike Rapid Thermal Annealing in c-SILICON Solar Cells

Science.gov (United States)

Liu, Guodong; Ren, Pan; Zhang, Dayong; Wang, Weiping; Li, Jianfeng

2016-01-01

The defects induced by a spike rapid thermal annealing (RTA) process in crystalline silicon (c-Si) solar cells were investigated by the photoluminescence (PL) technique and the transmission electron microscopy (TEM), respectively. Dislocation defects were found to form in the near-surface junction region of the monocrystalline Si solar cell after a spike RTA process was performed at 1100∘C. Photo J-V characteristics were measured on the Si solar cell before and after the spike RTA treatments to reveal the effects of defects on the Si cell performances. In addition, the Silvaco device simulation program was used to study the effects of defects density on the cell performances by fitting the experimental data of RTA-treated cells. The results demonstrate that there was an obvious degradation in the Si solar cell performances when the defect density after the spike RTA treatment was above 1×1013cm-3.

A New GMRES(m Method for Markov Chains

Directory of Open Access Journals (Sweden)

Bing-Yuan Pu

2013-01-01

Full Text Available This paper presents a class of new accelerated restarted GMRES method for calculating the stationary probability vector of an irreducible Markov chain. We focus on the mechanism of this new hybrid method by showing how to periodically combine the GMRES and vector extrapolation method into a much efficient one for improving the convergence rate in Markov chain problems. Numerical experiments are carried out to demonstrate the efficiency of our new algorithm on several typical Markov chain problems.

Market orientation seen in a value chain perspective

DEFF Research Database (Denmark)

Sonne, Anne-Mette; Stacey, Julia; Grunert, Klaus G.

2002-01-01

Market orientation is regarded as a prerequisite for a company's ability to create customer value and higher profits. Market orientation is usually regarded as something, which characterises a company. However, companies are part of value chains, and a lot of competition taking place...... in international markets is between the different value chains rather than between the individual companies. This is the reason why it makes more sense to look at the degree of market orientation in a complete value chain rather than the degree of market orientation of a single company....

Equivalence of chain conformations in the surface region of a polymer melt and a single Gaussian chain nder critical conditions

NARCIS (Netherlands)

Skvortsov, A.M.; Leermakers, F.A.M.; Fleer, G.J.

2013-01-01

In the melt polymer conformations are nearly ideal according to Flory's ideality hypothesis. Silberberg generalized this statement for chains in the interfacial region. We check the Silberberg argument by analyzing the conformations of a probe chain end-grafted at a solid surface in a sea of

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR)

OpenAIRE

Rizki Wahyuniardi; Moh. Syarwani; Ryan Anggani

2017-01-01

PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR) approach. The initial hierarchy model of performance measurement is tailored to the company's condi...

Chain Assembly and Disassembly Processes Differently Affect the Conformational Space of Ubiquitin Chains.

Science.gov (United States)

Kniss, Andreas; Schuetz, Denise; Kazemi, Sina; Pluska, Lukas; Spindler, Philipp E; Rogov, Vladimir V; Husnjak, Koraljka; Dikic, Ivan; Güntert, Peter; Sommer, Thomas; Prisner, Thomas F; Dötsch, Volker

2018-02-06

Ubiquitination is the most versatile posttranslational modification. The information is encoded by linkage type as well as chain length, which are translated by ubiquitin binding domains into specific signaling events. Chain topology determines the conformational space of a ubiquitin chain and adds an additional regulatory layer to this ubiquitin code. In particular, processes that modify chain length will be affected by chain conformations as they require access to the elongation or cleavage sites. We investigated conformational distributions in the context of chain elongation and disassembly using pulsed electron-electron double resonance spectroscopy in combination with molecular modeling. Analysis of the conformational space of diubiquitin revealed conformational selection or remodeling as mechanisms for chain recognition during elongation or hydrolysis, respectively. Chain elongation to tetraubiquitin increases the sampled conformational space, suggesting that a high intrinsic flexibility of K48-linked chains may contribute to efficient proteasomal degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hybrid Control of Supply Chains: a Structured Exploration from a Systems Perspective

Directory of Open Access Journals (Sweden)

Paul W. P. J. Grefen

2013-07-01

Full Text Available Supply chains are becoming increasingly complex these days, both in the structure of the chains and in the need for fine-grained, real-time control. This development occurs in many industries, such as manufacturing, logistics, and the service industry. The increasing structural complexity is caused by larger numbers of participating companies in supply chains because of increasing complexity of products and services. Increasing requirements to control are caused by developments like mass-customization, pressure on delivery times, and smaller margins for waste. Maintaining well-structured strategic, tactic, and operational control over these complex supply chains is not an easy task – certainly as they are pressured by end-to-end synchronization requirements and just-in-time demands. Things become even more complex when chains need to be flexible to react to changing requirements to the products or services they deliver. To enable design of well-structured control, clear models of control topologies are required. In this paper, we address this need by exploring supply chain control topologies in an organized fashion. The exploration is based on integrating a supply chain model and a control model in two alternative ways to obtain two extreme models for supply chain control. These two models are next combined to obtain a hybrid chain control model in which control parameters can be adapted to accommodate different circumstances, hence facilitating agility in supply chains and networks. We apply the developed model to a number of case studies to show its usability. The contribution of this paper is the structured analysis of the design space for chain-level control models - not the description of individual new models.

Geographic analysis of road accident severity index in Nigeria.

Science.gov (United States)

Iyanda, Ayodeji E

2018-05-28

Before 2030, deaths from road traffic accidents (RTAs) will surpass cerebrovascular disease, tuberculosis, and HIV/AIDS. Yet, there is little knowledge on the geographic distribution of RTA severity in Nigeria. Accident Severity Index is the proportion of deaths that result from a road accident. This study analysed the geographic pattern of RTA severity based on the data retrieved from Federal Road Safety Corps (FRSC). The study predicted a two-year data from a historic road accident data using exponential smoothing technique. To determine spatial autocorrelation, global and local indicators of spatial association were implemented in a geographic information system. Results show significant clusters of high RTA severity among states in the northeast and the northwest of Nigeria. Hence, the findings are discussed from two perspectives: Road traffic law compliance and poor emergency response. Conclusion, the severity of RTA is high in the northern states of Nigeria, hence, RTA remains a public health concern.

A Dynamic Stackelberg Game of Supply Chain for a Corporate Social Responsibility

Directory of Open Access Journals (Sweden)

Massimiliano Ferrara

2017-01-01

Full Text Available In this paper, we establish a dynamic game to allocate CSR (Corporate Social Responsibility to the members of a supply chain. We propose a model of a supply chain in a decentralized state which includes a supplier and a manufacturer. For analyzing supply chain performance in decentralized state and the relationships between the members of the supply chain, we formulate a model that crosses through multiperiods with the help of a dynamic discrete Stackelberg game which is made under two different information structures. We obtain an equilibrium point at which both the profits of members and the level of CSR taken up by supply chains are maximized.

Self-lacing atom chains

International Nuclear Information System (INIS)

Zandvliet, Harold J W; Van Houselt, Arie; Poelsema, Bene

2009-01-01

The structural and electronic properties of self-lacing atomic chains on Pt modified Ge(001) surfaces have been studied using low-temperature scanning tunnelling microscopy and spectroscopy. The self-lacing chains have a cross section of only one atom, are perfectly straight, thousands of atoms long and virtually defect free. The atomic chains are composed of dimers that have their bonds aligned in a direction parallel to the chain direction. At low temperatures the atomic chains undergo a Peierls transition: the periodicity of the chains doubles from a 2 x to a 4 x periodicity and an energy gap opens up. Furthermore, at low temperatures (T<80 K) novel quasi-one-dimensional electronic states are found. These quasi-one-dimensional electronic states originate from an electronic state of the underlying terrace that is confined between the atomic chains.

VBDO Responsible Supply Chain Benchmark 2012. A comparative investigation into CSR in the supply chain of 40 multinationals

Energy Technology Data Exchange (ETDEWEB)

Bres, C.; Cotterell, P.; Kaya, R.; Verbunt, S.

2012-11-15

This benchmark is a qualitative (partly quantitative), comparative investigation among 40 Dutch publicly listed companies, aiming to inform stakeholders on responsible supply chain management. These stakeholders are company executives, investors, academia, NGOs, government and society at large. Rather than concentrate on the nature of a company's activities, this benchmark focuses on the company's supply chain governance and management thereof. This makes it possible to compare, to a reasonable degree, the responsible supply chain policies of companies across different sectors.

Distal renal tubular acidosis in two children with acquired hypothyroidism.

Science.gov (United States)

Guerra-Hernández, Norma E; Ordaz-López, Karen V; Vargas-Poussou, Rosa; Escobar-Pérez, Laura; García-Nieto, Víctor M

2018-04-28

Two cases of children diagnosed with renal tubular acidosis (RTA) associated with autoimmune hypothyroidism are presented. Case 1 developed an intestinal ileus at the age of five in the context of a respiratory problem. The tests performed confirmed metabolic acidosis, hyperchloraemia, hypokalaemia and nephrocalcinosis. Case 2 was diagnosed with hypothyroidism at the age of 11, and with RTA two years later. In both patients, the diagnosis of RTA was verified when decreased maximum urinary pCO 2 was found. In case 2, a proximal bicarbonate leak (type 3 RTA) was also confirmed. This was the first case to be published on the topic. The causes of RTA in patients with hypothyroidism are reviewed. The deleterious effect on the kidneys may be due to the absence of thyroid hormone and/or autoantibodies in the cases of autoimmune hypothyroidism. Copyright © 2018 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

A REVIEW: POTENSI RISIKO PADA SUPPLY CHAIN RISK MANAGEMENT

Directory of Open Access Journals (Sweden)

Dwi Iryaning Handayani

2016-04-01

Full Text Available Supply Chain Risk Management merupakan risiko yang terjadi pada aliran produk, informasi, bahan baku sampai pengiriman produk akhir yang mengancam keseluruhan supply chain dari pemasok awal hingga sampai konsumen. Sedangkan Supply chain disruptions (gangguan rantai pasok adalah peristiwa tak terencana yang terjadi dalam rantai pasok yang bisa mempengaruhi aliran bahan dan komponen. Kejadian risiko yang terjadi didalam supply chain telah banyak dilakukan oleh beberapa peneliti sehingga perlu dilakukan review untuk mengetahui potensi risiko yang terjadi pada supply chain. Risiko yang terjadi pada supply chain berdasarkan hasil penelitian sebelumya terdapat 120 jenis risiko. Kesamaan risiko yang terjadi pada supply chain menghasilkan 17 jenis risiko yang sama pada supply chain dan terdapat 3 risiko yang sering terjadi yaitu risiko demand, keterlambatan bahan baku, Bencana alam (discruption, sedangkan 14 risiko lainnya yaitu , kwalitas supplier, kwalitas produk, sistem informasi, harga, suplai, produk rusak digudang, finansial, ketergantungan supplier, penundaan, kapasitas produksi, persediaan, kekurangan bahan baku, selisih stok dan politik. Adapun mitigasi yang dapat dilakukan dalam mengatasi gangguan supply chain ada 9 strategi yaitu: postponement, strategy stock, flexible supply base. make and buy, economic supply incentives, flexible transportation. revenue management via dynamic pricing and promotion, assortment planning. silent product rollover.

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain

Science.gov (United States)

Lee, Yumi; Song, Sang Hwa

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company’s sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers. PMID:29547625

A Bullet-Block Experiment that Explains the Chain Fountain

Science.gov (United States)

Pantaleone, J.; Smith, R.

2018-05-01

It is common in science for two phenomena to appear to be very different, but in fact follow from the same basic principles. Here we consider such a case, the connection between the chain fountain and a bullet-block collision experiment. When an upward moving bullet strikes a wooden block resting on a horizontal table, the block will rise to a higher height when the bullet strikes near the end of the block. This is because the quickly rotating block experiences an additional upward "reaction" force from its contact with the table. Such a reaction force also explains the chain fountain. When a chain falls from a pile in a container to the floor below, the chain rises up above the container. This rise occurs because the quickly rotating links in the container push off of the surface beneath them. We derive a model that accurately describes our measurements in the bullet-block experiment, and then use this same model to calculate an approximate expression for the distance the chain rises above the container. More extensive discussions of the chain fountain are available elsewhere.

Analysis of a complex shape chain plate using Transmission Photoelasticity

Directory of Open Access Journals (Sweden)

Dasari N.

2010-06-01

Full Text Available Most chains are an assembly [1] of five parts namely, outer plate, inner plate, bush, pin and roller. Two inner plates are press fitted with two bushes to form an inner block assembly. The outer plates are press fitted with pins after keeping the pins through the assembled bushes of the inner block. Roller is a rotating member and placed over the bush during inner block assembly. Inner block assembly is the load transfer member from sprocket tooth. The outer block assembly helps in holding and also to pull the inner block over the sprocket teeth. If a chain length is in odd number of pitches, it requires an offset plate as shown in Figure 1 to connect two ends of the chain together to make chain endless. When the chain is assembled with an offset plate, the chain fatigue life was observed only 20 to 25% of the total life of a chain, assembled without an offset plate. The holes in the offset plate are of the same size as in the outer and inner plates respectively and it is a complex in shape chain plate. A inbuilt thinning zone at the centre of the chain plate as shown in Figure 1 is unavoidable. The stresses and its distribution in this complex shape chain plate geometry play a critical role in the fatigue life performance of a chain assembly. However, it is difficult identify the stress distribution and stress concentration zones precisely using only the conventional industrial friendly tools such as routine quality control test, breaking load test and numerical computations. In this context the transmission photoelastic technique has made it possible to identify the stress distribution, its concentration and also to quantify the stress and strain [2-3] at any point in the chain plate. This paper explains how transmission photoelastic technique is used to estimate the stress distribution and its concentration zones in a complex chain plate when it isloaded. An epoxy chain plate model was made through the casting method using a Perspex mould [2

Enhancing electron transport in Si:P delta-doped devices by rapid thermal anneal

International Nuclear Information System (INIS)

Goh, K. E. J.; Augarten, Y.; Oberbeck, L.; Simmons, M. Y.

2008-01-01

We address the use of rapid thermal anneal (RTA) to enhance electron mobility and phase coherent transport in Si:P δ-doped devices encapsulated by low temperature Si molecular beam epitaxy while minimizing dopant diffusion. RTA temperatures of 500-700 deg. C were applied to δ-doped layers encapsulated at 250 deg. C. From 4.2 K magnetotransport measurements, we find that the improved crystal quality after RTA increases the mobility/mean free path by ∼40% and the phase coherence length by ∼25%. Our results suggest that the initial capping layer has near optimal crystal quality and transport improvement achieved by a RTA is limited

Electric properties of La2O3/SiO2/4H-SiC MOS capacitors with different annealing temperatures

Directory of Open Access Journals (Sweden)

Yucheng Wang

2015-08-01

Full Text Available In this work, we describe a rapid thermal annealing (RTA process for the La2O3/SiO2/4H-SiC interface and investigate its effect on the material’s electrical properties. Our results indicate that the trap charge density and interface state density (Dit are reduced as the RTA temperature increases due to the termination of residual carbon and dangling bonds. We demonstrate that the sample obtained after RTA at 500 °C has the highest breakdown electric field (Efb (7 MV/cm due to a decrease in the trap charge density and an improvement in the interfacial properties. However, when the RTA temperature reaches 600 °C or higher, a lower Efb value (1.2 MV/cm is obtained due to leakage routes generated by the crystallization of La2O3. Based on our results, we conclude that the ideal choice for the RTA temperature is 500 °C.

Single-Chain Folding of Synthetic Polymers: A Critical Update.

Science.gov (United States)

Altintas, Ozcan; Barner-Kowollik, Christopher

2015-11-23

The current contribution serves as a critical update to a previous feature article from us (Macromol. Rapid Commun. 2012, 33, 958-971), and highlights the latest advances in the preparation of single chain polymeric nanoparticles and initial-yet promising-attempts towards mimicking the structure of natural biomacromolecules via single-chain folding of well-defined linear polymers via so-called single chain selective point folding and repeat unit folding. The contribution covers selected examples from the literature published up to ca. September 2015. Our aim is not to provide an exhaustive review but rather highlight a selection of new and exciting examples for single-chain folding based on advanced macromolecular precision chemistry. Initially, the discussion focuses on the synthesis and characterization of single-chain folded structures via selective point folding. The second part of the feature article addresses the folding of well-defined single-chain polymers by means of repeat unit folding. The current state of the art in the field of single-chain folding indicates that repeat unit folding-driven nanoparticle preparation is well-advanced, while initial encouraging steps towards building selective point folding systems have been taken. In addition, a summary of the-in our view-open key questions is provided that may guide future biomimetic design efforts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Integrated supply chain risk management

OpenAIRE

Riaan Bredell; Jackie Walters

2007-01-01

Integrated supply chain risk management (ISCRM) has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly ...

Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

OpenAIRE

Radanliev, P

2015-01-01

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

Effective food supply chains : generating, modelling and evaluating supply chain scenarios

NARCIS (Netherlands)

Vorst, van der J.G.A.J.

2000-01-01

Logistical co-ordination in FMCG supply chains

The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to

VBDO Responsible Supply Chain Benchmark 2012. A comparative investigation into CSR in the supply chain of 40 multinationals

Energy Technology Data Exchange (ETDEWEB)

Bres, C.; Cotterell, P.; Kaya, R.; Verbunt, S.

2012-11-15

This benchmark is a qualitative (partly quantitative), comparative investigation among 40 Dutch publicly listed companies, aiming to inform stakeholders on responsible supply chain management. These stakeholders are company executives, investors, academia, NGOs, government and society at large. Rather than concentrate on the nature of a company's activities, this benchmark focuses on the company's supply chain governance and management thereof. This makes it possible to compare, to a reasonable degree, the responsible supply chain policies of companies across different sectors.

A great start for the whole CERN accelerator chain

CERN Multimedia

2016-01-01

With physics data-taking under way this week at the LHC, I’d like to take a look at what’s been happening at the rest of the CERN accelerator chain.   The LHC tends to dominate the news from CERN for all kinds of reasons, beech martens included, but we should not forget that there is a unique chain of accelerators upstream of the LHC, tended to and operated by an incredible group of people. If our whole accelerator chain does not work perfectly, nor can the LHC, and in addition to forming the LHC’s injector chain, our upstream accelerators support their own experiments, bringing great diversity to the CERN research programme. The chain begins with the proton source and Linac2, which have been faithfully delivering beams since 1978. This year, Linac2 accelerated its first beams on 29 February. Beams were then passed on to the PS Booster and the veteran PS, the linchpin of the CERN accelerator complex and in operation since 1959. The final link in the chain before the ...

Levels & Barriers to Supply Chain Integration: A conceptual model of Supply Chain Performance

OpenAIRE

RajaIrfan Sabir; Muhammad Irfan

2014-01-01

In modern business scenario Supply chain has become the back bone for every business organization. All supply chain partners are joined together in value delivery network of company that no one can perform better without support of other. The ultimate objective of this cohesive relationship is to deliver value to customers and gets desired state of customer satisfaction & loyalty for the organization. For this purpose it is necessary to integrate the internal and external partners of Supply c...

Information transmission and control in a chaotically kicked spin chain

International Nuclear Information System (INIS)

Aubourg, Lucile; Viennot, David

2016-01-01

We study spin chains submitted to disturbed kick trains described by classical dynamical processes. The spin chains are coupled by Heisenberg and Ising-Z models. We consider chaotic processes by using the kick irregularity in the multipartite system (the spin chain). We show that both couplings transmit the chaos disorder differently along the spin chain but conserve the horizon of coherence (when the disorder into the kick bath is transmitted to the spin chain). An example of information transmission between the spins of the chain coupled by a Heisenberg interaction shows the interest of the horizon of coherence. The use of some chosen stationary kicks disturbed by a chaotic environment makes it possible to modify the information transmission between the spins and to perform a free control during the horizon of coherence. (paper)

The synergistic and complementary effects of supply chain justice and integration practices on supply chain performance: A conceptual framework and research propositions

Directory of Open Access Journals (Sweden)

Muhammad Ziaullah

2015-11-01

Full Text Available In recent years, firms have been using their supply chain integration (SCI as a competitive weapon in the intensive, globalised competitive arena. The contingent perspective in supply chain management maintains that it is necessary to observe the interaction between SCI practices and supply chain justice. A critical issue to be resolved is whether this fit leads to synergistic and complementary effects on supply chain performance. In order to contribute to this research problem, we analysed supply chain justice instances in order to determine the importance of supply chain justice, as well as highlights complementary role in SCI and its influences on supply chain performance. A conceptual framework has been developed and five propositions established to verify the contents of a theoretical study. Accordingly, balancing the adoption of SCI practices and supply chain justice will lead to the generation of greater benefits relative to the effect of both independent driving forces on supply chain performance. Furthermore, the proposed framework has been analysed in order to examine its applicability in the South African context. The study thereby suggests the empirical research guidelines and the paper concludes with a discussion of future research.

Supply chain planning classification

Science.gov (United States)

Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

2001-10-01

Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

How manufacturers can use their reverse supply chain: a typology of reverse supply chain roles

DEFF Research Database (Denmark)

Larsen, Samuel; Jacobsen, Peter

2014-01-01

While traditional forward supply chains end with customer markets, the reverse supply chain (RSC) both begins and ends with the firm’s markets. The study applies the prevalent conceptual RSC‐description in the theoretical field by Guide and Van Wassenhove (2009). In the description, the RSC begins...... is not explicitly part of the description, this study does include them as disposition strategies. Although some RSC topics have been fairly well‐addressed in extant literature (e.g. product acquisition, inventory models and product disassembly), the RSC‐topic remains under‐explored (Pohkarel and Mutha, 2009...... the reverse logistical processes required for supporting a liberal return policy, etc. Based on extant literature from the supply chain management and OM fields, this study develops a conceptual typology of what roles the RSC can play in the firm’s efforts of achieving higher overall economic profits. Each...

Duplex quantum communication through a spin chain

Science.gov (United States)

Wang, Zhao-Ming; Bishop, C. Allen; Gu, Yong-Jian; Shao, Bin

2011-08-01

Data multiplexing within a quantum computer can allow for the simultaneous transfer of multiple streams of information over a shared medium thereby minimizing the number of channels needed for requisite data transmission. Here, we investigate a two-way quantum communication protocol using a spin chain placed in an external magnetic field. In our scheme, Alice and Bob each play the role of a sender and a receiver as two states, cos((θ1)/(2))0+sin((θ1)/(2))eiφ11 and cos((θ2)/(2))0+sin((θ2)/(2))eiφ21, are transferred through one channel simultaneously. We find that the transmission fidelity at each end of a spin chain can usually be enhanced by the presence of a second party. This is an important result for establishing the viability of duplex quantum communication through spin chain networks.

Supply-Chain Optimization Template

Science.gov (United States)

Quiett, William F.; Sealing, Scott L.

2009-01-01

The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

Collisionless magnetic reconnection in a plasmoid chain

Directory of Open Access Journals (Sweden)

S. Markidis

2012-02-01

Full Text Available The kinetic features of plasmoid chain formation and evolution are investigated by two dimensional Particle-in-Cell simulations. Magnetic reconnection is initiated in multiple X points by the tearing instability. Plasmoids form and grow in size by continuously coalescing. Each chain plasmoid exhibits a strong out-of plane core magnetic field and an out-of-plane electron current that drives the coalescing process. The disappearance of the X points in the coalescence process are due to anti-reconnection, a magnetic reconnection where the plasma inflow and outflow are reversed with respect to the original reconnection flow pattern. Anti-reconnection is characterized by the Hall magnetic field quadrupole signature. Two new kinetic features, not reported by previous studies of plasmoid chain evolution, are here revealed. First, intense electric fields develop in-plane normally to the separatrices and drive the ion dynamics in the plasmoids. Second, several bipolar electric field structures are localized in proximity of the plasmoid chain. The analysis of the electron distribution function and phase space reveals the presence of counter-streaming electron beams, unstable to the two stream instability, and phase space electron holes along the reconnection separatrices.

Critical Casimir effect in a polymer chain in supercritical solvents.

Science.gov (United States)

Sumi, Tomonari; Imazaki, Nobuyuki; Sekino, Hideo

2009-03-01

Density fluctuation effects on the conformation of a polymer chain in a supercritical solvent were investigated by performing a multiscale simulation based on the density-functional theory. We found (a) a universal swelling of the polymer chain near the critical point, irrespective of whether the polymer chain is solvophilic or solvophobic, and (b) a characteristic collapse of the polymer chain having a strong solvophilicity at a temperature slightly higher than the critical point, where the isothermal compressibility becomes less than the ideal one.

SUPPLY CHAIN RISKS: LITERATURE REVIEW AND A NEW CATEGORIZATION

OpenAIRE

Er Kara, Merve; Oktay Fırat, Seniye Ümit

2017-01-01

Identification of risks is the first step to build a resilient and sustainable supply chain and develop proactive risk management strategies. Supply chains contain numerous risks with different forms, probabilities and impacts. Supply chain risks have a multi-dimensional nature and can result from a wide variety of sources including demand and supply variability, poor performing suppliers, price fluctuations, dynamic consumer markets, global economic uncertainty, and even unexpected events su...

A Bayesian model for binary Markov chains

Directory of Open Access Journals (Sweden)

Belkheir Essebbar

2004-02-01

Full Text Available This note is concerned with Bayesian estimation of the transition probabilities of a binary Markov chain observed from heterogeneous individuals. The model is founded on the Jeffreys' prior which allows for transition probabilities to be correlated. The Bayesian estimator is approximated by means of Monte Carlo Markov chain (MCMC techniques. The performance of the Bayesian estimates is illustrated by analyzing a small simulated data set.

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR

Directory of Open Access Journals (Sweden)

Rizki Wahyuniardi

2017-12-01

Full Text Available PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR approach. The initial hierarchy model of performance measurement is tailored to the company's condition to measure its supply chain performance, while the normalization of Snorm De Boer serves to equalize the value of the matrix used as the measurement indicator. The level of importance of performance attributes is measured by weighting with subjective questionnaires. Value of performance attribute obtained reliability 19,74, responsiveness 16,91, agility 11,00; and asset management 12.26. The total performance score of 59.90. This value indicates that the performance of the supply chain is in an average position.

Quality in Construction- A Supply Chain Perspective

DEFF Research Database (Denmark)

Koch, Christian; Larsen, Casper Schultz

2006-01-01

be demonstrated by studying the emergence of failures occurring in the supply chain. The paper conceptualises the construction supply as a delivery network being partially stable, partially project specific and configured. It moreover develops a frame of understanding of the handling of quality issues...... in the delivery network, using operation management approaches. The paper presents case study work done in Danish construction. The method was observation of work at the construction site followed by interviews with actors backwards upstream the supply chain to the origin of the failure. The building project...... into the material stream. The paper proposes initiatives to strengthen partnerships in supply chains, especially at mixed stable and project configured types. The contradiction between permanent enterprise organisations potentially capable of handling purchasing and the role of the project manager is discussed...

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective

Science.gov (United States)

Su, Shong-Iee Ivan

2017-01-01

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective

Directory of Open Access Journals (Sweden)

Zhisong Chen

2017-11-01

Full Text Available In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to

Dual Competing Photovoltaic Supply Chains: A Social Welfare Maximization Perspective.

Science.gov (United States)

Chen, Zhisong; Su, Shong-Iee Ivan

2017-11-20

In the past decades, the inappropriate subsidy policies in many nations have caused problems such as serious oversupply, fierce competition and subpar social welfare in the photovoltaic (PV) industry in many nations. There is a clear shortage in the PV industry literature regarding how dual supply chains compete and the key decision issues regarding the competition between dual PV supply chains. It is critical to develop effective subsidy policies for the competing PV supply chains to achieve social welfare maximization. This study has explored the dual PV supply chain competition under the Bertrand competition assumption by three game-theoretical modeling scenarios (or supply chain strategies) considering either the public subsidy or no subsidy from a social welfare maximization perspective. A numerical analysis complemented by two sensitivity analyses provides a better understanding of the pricing and quantity decision dynamics in the dual supply chains under three different supply chain strategies and the corresponding outcomes regarding the total supply chain profits, the social welfare and the required total subsidies. The key findings disclose that if there are public subsidies, the dual PV supply chains have the strongest intention to pursue the decentralized strategy to achieve their maximal returns rather than the centralized strategy that would achieve the maximal social welfare; however, the government would need to pay for the maximal subsidy budget. Thus, the best option for the government would be to encourage the dual PV supply chains to adopt a centralized strategy since this will not only maximize the social welfare but also, at the same time, minimize the public subsidy. With a smart subsidy policy, the PV industry can make the best use of the subsidy budget and grow in a sustainable way to support the highly demanded solar power generation in many countries trying very hard to increase the proportion of their clean energy to combat the global

Understanding your supply chain to reduce the risk of supply chain disruption.

Science.gov (United States)

Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

2012-01-01

Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

Managing Consumer Referrals in a Chain Network

OpenAIRE

Maria Arbatskaya; Hideo Konishi

2014-01-01

We consider the optimal pricing and referral strategy of a monopoly that uses a simple consumer communication network (a chain) to spread product information. The first-best policy with fully discriminatory position-based referral fees involves standard monopoly pricing and referral fees that provide consumers with strictly positive referral incentives. Effective price discrimination among consumers based on their positions in the chain occurs in both the first-best solution and the second-be...

Integrated supply chain risk management

Directory of Open Access Journals (Sweden)

Riaan Bredell

2007-11-01

Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

Requirements of supply chain management in differentiating European pork chains.

Science.gov (United States)

Trienekens, Jacques; Wognum, Nel

2013-11-01

This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

Measuring performance at the supply chain level: the role of the chain director

Directory of Open Access Journals (Sweden)

Job A.C. De Haan

2016-05-01

The findings show when an attempt to implement a PMS at the supply chain level might be appropriate and effective (if a chain exists and has a director, and how the system’s content should be focused on what is needed to improve chain performance (with end customers’ demands as a starting point. The paper highlights the benefits obtained by the other partners if they comply with the best informed supply chain member in the development of the chain’s PMS, as well as how a PMS cannot be developed when none of the partners can be labelled as chain director.

Switching Markov chains for a holistic modeling of SIS unavailability

International Nuclear Information System (INIS)

Mechri, Walid; Simon, Christophe; BenOthman, Kamel

2015-01-01

This paper proposes a holistic approach to model the Safety Instrumented Systems (SIS). The model is based on Switching Markov Chain and integrates several parameters like Common Cause Failure, Imperfect Proof testing, partial proof testing, etc. The basic concepts of Switching Markov Chain applied to reliability analysis are introduced and a model to compute the unavailability for a case study is presented. The proposed Switching Markov Chain allows us to assess the effect of each parameter on the SIS performance. The proposed method ensures the relevance of the results. - Highlights: • A holistic approach to model the unavailability safety systems using Switching Markov chains. • The model integrates several parameters like probability of failure due to the test, the probability of not detecting a failure in a test. • The basic concepts of the Switching Markov Chains are introduced and applied to compute the unavailability for safety systems. • The proposed Switching Markov Chain allows assessing the effect of each parameter on the chemical reactor performance

Redshift and blueshift of GaNAs/GaAs multiple quantum wells induced by rapid thermal annealing

Science.gov (United States)

Sun, Yijun; Cheng, Zhiyuan; Zhou, Qiang; Sun, Ying; Sun, Jiabao; Liu, Yanhua; Wang, Meifang; Cao, Zhen; Ye, Zhi; Xu, Mingsheng; Ding, Yong; Chen, Peng; Heuken, Michael; Egawa, Takashi

2018-02-01

The effects of rapid thermal annealing (RTA) on the optical properties of GaNAs/GaAs multiple quantum wells (MQWs) grown by chemical beam epitaxy (CBE) are studied by photoluminescence (PL) at 77 K. The results show that the optical quality of the MQWs improves significantly after RTA. With increasing RTA temperature, PL peak energy of the MQWs redshifts below 1023 K, while it blueshifts above 1023 K. Two competitive processes which occur simultaneously during RTA result in redshift at low temperature and blueshift at high temperature. It is also found that PL peak energy shift can be explained neither by nitrogen diffusion out of quantum wells nor by nitrogen reorganization inside quantum wells. PL peak energy shift can be quantitatively explained by a modified recombination coupling model in which redshift nonradiative recombination and blueshift nonradiative recombination coexist. The results obtained have significant implication on the growth and RTA of GaNAs material for high performance optoelectronic device application.

Supply chain components

OpenAIRE

Vieraşu, T.; Bălăşescu, M.

2011-01-01

In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Chain transitivity in hyperspaces

International Nuclear Information System (INIS)

Fernández, Leobardo; Good, Chris; Puljiz, Mate; Ramírez, Ártico

2015-01-01

Given a non-empty compact metric space X and a continuous function f: X → X, we study the dynamics of the induced maps on the hyperspace of non-empty compact subsets of X and on various other invariant subspaces thereof, in particular symmetric products. We show how some important dynamical properties transfer across induced systems. These amongst others include, chain transitivity, chain (weakly) mixing, chain recurrence, exactness by chains. From our main theorem we derive an ε-chain version of Furstenberg’s celebrated 2 implies n Theorem. We also show the implications our results have for dynamics on continua.

Building supply chain communication systems: a review of methods and techniques

Directory of Open Access Journals (Sweden)

A F Cutting-Decelle

2006-06-01

Full Text Available With the increasing importance of computer-based communication technologies, communication networks are becoming crucial in supply chain management. Given the objectives of the supply chain, supply chain management is situated at the intersection of different professional sectors, each of them with its own vocabulary, its own knowledge and rules. This paper provides a review of the main approaches to supply chain communications through the analysis of different ways of modelling a supply chain and the presentation of new semantic-based approaches that have been and are being developed to improve the quality of the information exchanges within the supply chain.

Sustainable supply chain design: a configurational approach.

Science.gov (United States)

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

Science.gov (United States)

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

Markov Tail Chains

OpenAIRE

janssen, Anja; Segers, Johan

2013-01-01

The extremes of a univariate Markov chain with regularly varying stationary marginal distribution and asymptotically linear behavior are known to exhibit a multiplicative random walk structure called the tail chain. In this paper we extend this fact to Markov chains with multivariate regularly varying marginal distributions in Rd. We analyze both the forward and the backward tail process and show that they mutually determine each other through a kind of adjoint relation. In ...

Supply Chain Management Practices in Toy Supply Chains

DEFF Research Database (Denmark)

Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

2005-01-01

Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

Mesoscale simulation of semiflexible chains. I. Endpoint distribution and chain dynamics

Science.gov (United States)

Groot, Robert D.

2013-06-01

The endpoint distribution and dynamics of semiflexible fibers are studied by numerical simulation. A brief overview is given over the analytical theory of flexible and semiflexible polymers. In particular, a closed expression is given for the relaxation spectrum of wormlike chains, which determines polymer diffusion and rheology. Next a simulation model for wormlike chains with full hydrodynamic interaction is described, and relations for the bending and torsion modulus are given. Two methods are introduced to include torsion stiffness into the model. The model is validated by simulating single chains in a heat bath, and comparing the endpoint distribution of the chains with established Monte Carlo results. It is concluded that torsion stiffness leads to a slightly shorter effective persistence length for a given bending stiffness. To further validate the simulation model, polymer diffusion is studied for fixed persistence length and varying polymer length N. The diffusion constant shows crossover from Rouse (D ∝ N-1) to reptation behaviour (D ∝ N-2). The terminal relaxation time obtained from the monomer displacement is consistent with the theory of wormlike chains. The probability for chain crossing has also been studied. This probability is so low that it does not influence the present results.

The Complementary Perspective of System of Systems in Collaboration, Integration, and Logistics: A Value-Chain Based Paradigm of Supply Chain Management

Directory of Open Access Journals (Sweden)

Raed Jaradat

2017-10-01

Full Text Available The importance and complexity of the problems associated with coordinating multiple organizations to configure value propositions for customers has drawn the attention of multiple disciplines. In an effort to clarify and consolidate terms, this conceptual research examines both supply chain management (SCM and system of systems (SoS literature to postulate, from a value-chain perspective, what roles integration and collaboration play in helping supply chains satisfy customer requirements. A literature review analysis was used to identify the commonalities and differences between supply chain management and system of systems approaches to examining interfirm coordination of value creation efforts. Although a framework of integration and collaboration roles in value creation is proposed, further empirical testing of the concept is required to substantiate initial conclusions. The concepts proposed may help clarify where strategic and operational managers need to focus their efforts in coordinating supply chain member firms. The incorporation of SoS engineering into the supply chain field will draw the linkage between the constituent principles, and concepts of Systems Theory as appropriate for the supply chain management field. This is the first effort to reconcile two separate but parallel scholarship streams examining the coordination of multiple organizations in value creation. This research shows that there are some methodologies, principles, and methods from the SoS field that can supplement supply chain management research. Mainly due to a unit of analysis issue, systems based approaches have not been in the mainstream of supply chain management field development.

Supply chain components

Directory of Open Access Journals (Sweden)

Vieraşu, T.

2011-01-01

Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Supply Chain Management og Supply Chain costing

DEFF Research Database (Denmark)

Nielsen, Steen; Mortensen, Ole

2002-01-01

Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

The Global Value Chain

DEFF Research Database (Denmark)

Sørensen, Olav Jull

The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool......The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool...

Slow magnetic relaxation in a cobalt magnetic chain.

Science.gov (United States)

Yang, Chen-I; Chuang, Po-Hsiang; Lu, Kuang-Lieh

2011-04-21

A homospin ladder-like chain, [Co(Hdhq)(OAc)](n) (1; H(2)dhq = 2,3-dihydroxyquinoxaline), shows a single-chain-magnet-like (SCM-like) behavior with the characteristics of frequency dependence of the out-of-phase component in alternating current (ac) magnetic susceptibilities and hysteresis loops. © The Royal Society of Chemistry 2011

An intelligent traceability system: Efficient tool for a supply chain sustainability

Science.gov (United States)

Bougdira, Abdesselam; Ahaitouf, Abdelaziz; Akharraz, Ismail

2016-07-01

The supply chain sustainability becomes a necessity for a smooth, a rapid and a fluid economic transaction. To reach a sustainable supply chain, we propose to focus attention on products and their lifecycle. So, we consider the traceability as a major success key to ensure the supply chain sustainability. For that, we consider a supply chain design that use an intelligent products traced by an intelligent traceability system. This system identifies, restores history and properties of a product, besides it tracks, in real-time a product. This solution can, also, bring, in the product environment, appropriate adjustments to prevent any risk of threatening qualities for the product. So, it helps supply chain contributors making the sustainable adjustments and the instant benchmark of the supply chain sustainability.

The Use of Supply Chains and Supply Chain Management in the ...

African Journals Online (AJOL)

Dr Peter Schmitz

supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

A Framework of Sustainable Service Supply Chain Management: A Literature Review and Research Agenda

Directory of Open Access Journals (Sweden)

Weihua Liu

2017-03-01

Full Text Available In recent years, the interdisciplinary research of supply chains and sustainability has received extensive, yet gradual, attention; when compared to the rapid economic growth of the service industry, however, sustainable supply chain management has not been systematically explored yet. It has not only great theoretical significance, but also positive practical significance to provide a framework for the operation of a sustainable service supply chain from a sustainable development point of view. Based on the triple bottom line (TBL, we have analyzed related sustainable supply chain management research between 2006 and 2015, reviewed papers involving two or three bottom lines as well, and then introduced some classical frameworks for manufacturing supply chain management and service supply chain management. Afterward, by analyzing the differences between the manufacturing and service industries, we propose a framework of sustainable service supply chain management (SSSCM. Based on the impacts of sustainable development TBL on service supply chain participants, we have finally made a framework for sustainable operation facing triads service supply chain and proposed a future research agenda.

Fresh fish distribution chains: An analysis of three Danish and three Australian chains

DEFF Research Database (Denmark)

Frederiksen, Marco Thorup; Bremner, Allan

2001-01-01

. Traceability is a most important issue in the high value product chains in Australia. No information technology methods, were in evidence. In the Danish chains, nearly all traceability was lost after the collector/auction stage and the only evaluation of quality parameters was by inspection.......Information on traceability was gathered for three domestic Danish fish chains typical of the current trading practices in fresh seafood and for three chains exporting products from Australia to Japan. The same standard questionnaires, coupled with personal interviews, were used in all six chains...

Razjašnjenje definisanja transportnog lanca / Clarification of a term transport chain

Directory of Open Access Journals (Sweden)

Aleksandar B. Cakić

2010-01-01

Full Text Available U radu je pregledno prikazano na koji način se u savremenoj naučnoj praksi definiše pojam transportnog lanca i njegova optimizacija. Radi pojašnjenja dato je poređenje sa logističkim i snabdevačkim lancem, i definisane su razlike i sličnosti u ovim pojmovima radi razgraničenja različitog definisanja pojmova. Takođe, upoređeni su pojmovi optimizacije transportnih i optimizacije logističkih lanaca i danas vrlo prisutnog pojma upravljanja snabdevačkim lancima - supply chain management (SCM. / INTRODUCTION This paper describes a few different approaches to define the terms 'transport chain' and 'supply chain' aiming at their clarification. TERM TRANSPORT CHAIN The author gives a survey of 'transport' definitions from international, civilian and military, and national literature. Then he gives his definition of a transport chain as a sequence of overall operations, necessary for exchange of goods in time and space within the framework of goods flow during transit from the source to the consumption point. The transport chain is connected neither with the limits of production organizations, particular industrial branches nor other structures of national economy. Transport chains also exist in the Army of Serbia (AS. Optimization of transport chains during peace time has a goal to enable easy and fast selection of an optimal transportation chain. DIFFERENCES AND SIMILARITIES IN DEFINING THE TERMS OF LOGISTIC, SUPPLY AND TRANSPORT CHAIN Modern authors define differently the terms which generally represent similar processes and activities while having almost an identical function. These terms are logistic chain, supply chain and transport chain. For better clarification, these terms are compared herein. Term supply chain The terms supply and supply chain dominate in world literature, as well as supply chain management (SCM, as a specific scientific field. This field is subject to special attention due to its importance in decision

DataComm in Flight Deck Surface Trajectory-Based Operations

Science.gov (United States)

Bakowski, Deborah L.; Foyle, David C.; Hooey, Becky L.; Meyer, Glenn R.; Wolter, Cynthia A.

2012-01-01

The purpose of this pilot-in-the-loop aircraft taxi simulation was to evaluate a NextGen concept for surface trajectory-based operations (STBO) in which air traffic control (ATC) issued taxi clearances with a required time of arrival (RTA) by Data Communications (DataComm). Flight deck avionics, driven by an error-nulling algorithm, displayed the speed needed to meet the RTA. To ensure robustness of the algorithm, the ability of 10 two-pilot crews to meet the RTA was tested in nine experimental trials representing a range of realistic conditions including a taxi route change, an RTA change, a departure clearance change, and a crossing traffic hold scenario. In some trials, these DataComm taxi clearances or clearance modifications were accompanied by 'preview' information, in which the airport map display showed a preview of the proposed route changes, including the necessary speed to meet the RTA. Overall, the results of this study show that with the aid of the RTA speed algorithm, pilots were able to meet their RTAs with very little time error in all of the robustness-testing scenarios. Results indicated that when taxi clearance changes were issued by DataComm only, pilots required longer notification distances than with voice communication. However, when the DataComm was accompanied by graphical preview, the notification distance required by pilots was equivalent to that for voice.

DataComm in Flight Deck Surface Trajectory-Based Operations. Chapter 20

Science.gov (United States)

Bakowski, Deborah L.; Foyle, David C.; Hooey, Becky L.; Meyer, Glenn R.; Wolter, Cynthia A.

2012-01-01

The purpose of this pilot-in-the-loop aircraft taxi simulation was to evaluate a NextGen concept for surface trajectory-based operations (STBO) in which air traffic control (ATC) issued taxi clearances with a required time of arrival (RTA) by Data Communications (DataComm). Flight deck avionics, driven by an error-nulling algorithm, displayed the speed needed to meet the RTA. To ensure robustness of the algorithm, the ability of 10 two-pilot crews to meet the RTA was tested in nine experimental trials representing a range of realistic conditions including a taxi route change, an RTA change, a departure clearance change, and a crossing traffic hold scenario. In some trials, these DataComm taxi clearances or clearance modifications were accompanied by preview information, in which the airport map display showed a preview of the proposed route changes, including the necessary speed to meet the RTA. Overall, the results of this study show that with the aid of the RTA speed algorithm, pilots were able to meet their RTAs with very little time error in all of the robustness-testing scenarios. Results indicated that when taxi clearance changes were issued by DataComm only, pilots required longer notification distances than with voice communication. However, when the DataComm was accompanied by graphical preview, the notification distance required by pilots was equivalent to that for voice.

Teaching Supply Chain Management Complexities: A SCOR Model Based Classroom Simulation

Science.gov (United States)

Webb, G. Scott; Thomas, Stephanie P.; Liao-Troth, Sara

2014-01-01

The SCOR (Supply Chain Operations Reference) Model Supply Chain Classroom Simulation is an in-class experiential learning activity that helps students develop a holistic understanding of the processes and challenges of supply chain management. The simulation has broader learning objectives than other supply chain related activities such as the…

1652-IJBCS-Article-Samba Ndiaye

African Journals Online (AJOL)

hp

Ricinus communis L (ricin) figure parmi les espèces du Programme biocarburant au Sénégal. Sa culture sur des terrains incultes (terres salées) constitue une alternative pour éviter une concurrence sur les terres à vocation agricole. C'est pourquoi le taux de germination (TG) de sept accessions de graines de ricin a été.

Extreme event statistics in a drifting Markov chain

Science.gov (United States)

Kindermann, Farina; Hohmann, Michael; Lausch, Tobias; Mayer, Daniel; Schmidt, Felix; Widera, Artur

2017-07-01

We analyze extreme event statistics of experimentally realized Markov chains with various drifts. Our Markov chains are individual trajectories of a single atom diffusing in a one-dimensional periodic potential. Based on more than 500 individual atomic traces we verify the applicability of the Sparre Andersen theorem to our system despite the presence of a drift. We present detailed analysis of four different rare-event statistics for our system: the distributions of extreme values, of record values, of extreme value occurrence in the chain, and of the number of records in the chain. We observe that, for our data, the shape of the extreme event distributions is dominated by the underlying exponential distance distribution extracted from the atomic traces. Furthermore, we find that even small drifts influence the statistics of extreme events and record values, which is supported by numerical simulations, and we identify cases in which the drift can be determined without information about the underlying random variable distributions. Our results facilitate the use of extreme event statistics as a signal for small drifts in correlated trajectories.

Development and application of the european cold chain database as a tool for cold chain management

OpenAIRE

Gogou , E.; Katsaros , G.; Derens , E.; Li , L.; Alvarez , G.; Taoukis , P.

2013-01-01

2nd IIR International Conference on Sustainability and the Cold Chain, Paris, FRA, 02-/04/2013 - 04/04/2013; International audience; Storage and distribution are the weakest links in the food management. Their effective control is important for their commercial viability, since they often deviate from specifications. FRISBEE (http://frisbee - project.eu) is a Food Refrigeration Innovation for Cold Chain research IP European project. Within FRISBEE a web - based platform (hosted in the link ht...

A review on green supply chain aspects and practices

Directory of Open Access Journals (Sweden)

Islam Shamimul

2017-03-01

Full Text Available The field of green supply chain is expanding rapidly, and new authors are venturing in this field to conduct further research. Although some literature reviews have beeen conducted over time, a complete list of green supply chain practices is not available. Hence, the objective of this study is to present an up-to-date list of green supply chain practices. To achieve this, the study employed structured review process, as well as critically examined the contents to ensure that the data are filtered from high-quality peer-reviewed journals and from influential authors in this field. 91 high-quality papers were selected from top ten journals in GSCM area to produce the list. A total of 58 green supply chain practices comprising 15 aspects were featured, e.g. reverse logistics, industrial symbiosis, green information technology, green design, carbon management etc. This paper contributes to the existing literature by providing a comprehensive list of aspects and practices of the green supply chain. Finally, limitations and directions for future studies are provided in the conclusion section.

Analysis of Supply Chain Risk Management Strategies: Case Study of Supply Chain Disruptions

OpenAIRE

Marcelo Dias Carvalho; Leticia Ishikawa

2016-01-01

Supply Chain Risk Management refers to a set of strategies used by companies to avoid supply chain disruption caused by damage at production facilities, natural disasters, capacity issues, inventory problems, incorrect forecasts, and delays. Many companies use the techniques of the Toyota Production System, which in a way goes against a better management of supply chain risks. This paper studies key events in some multinationals to analyze the trade-off between the best supply chain risk mana...

The Mechanics of a Chain or Ring of Spherical Magnets

KAUST Repository

Hall, Cameron L.; Vella, Dominic; Goriely, Alain

2013-01-01

Strong magnets, such as neodymium-iron-boron magnets, are increasingly being manufactured as spheres. Because of their dipolar characters, these spheres can easily be arranged into long chains that exhibit mechanical properties reminiscent of elastic strings or rods. While simple formulations exist for the energy of a deformed elastic rod, it is not clear whether or not they are also appropriate for a chain of spherical magnets. In this paper, we use discrete-to-continuum asymptotic analysis to derive a continuum model for the energy of a deformed chain of magnets based on the magnetostatic interactions between individual spheres. We find that the mechanical properties of a chain of magnets differ significantly from those of an elastic rod: while both magnetic chains and elastic rods support bending by change of local curvature, nonlocal interaction terms also appear in the energy formulation for a magnetic chain. This continuum model for the energy of a chain of magnets is used to analyze small deformations of a circular ring of magnets and hence obtain theoretical predictions for the vibrational modes of a circular ring of magnets. Surprisingly, despite the contribution of nonlocal energy terms, we find that the vibrations of a circular ring of magnets are governed by the same equation that governs the vibrations of a circular elastic ring. Copyright © by SIAM.

A comparison of radionuclide thyroid angiography, 99mTc-MIBI scintigraphy and power Doppler ultrasonography in the differential diagnosis of solitary cold thyroid nodules

International Nuclear Information System (INIS)

Demirel, Koray; Kapucu, Oezlem; Yuecel, Cem; Oezdemir, Hakan; Ayvaz, Goeksun; Taneri, Ferit

2003-01-01

We prospectively studied 43 patients with solitary cold thyroid nodules greater than 1.5 cm in diameter to determine the comparative diagnostic value of radionuclide thyroid angiography (RTA), technetium-99m methoxyisobutylisonitrile ( 99m Tc-MIBI) scintigraphy and power Doppler ultrasonography (PDUS) in the differentiation of benign and malignant thyroid nodules. Perfusion of the nodules in RTA was compared with the perfusion in the surrounding normal thyroid tissue and classified as follows: 0, avascular; 1, hypovascular; 2, isovascular; 3, hypervascular. 99m Tc-MIBI uptake in the nodules compared with that in surrounding thyroid tissue was scored for both early and delayed images as follows: 0, cold; 1, decreased; 2, equal; 3, increased. PDUS patterns were classified as nodule vascularisation patterns. The malignancy criteria were set as follows: hypervascular nodule with rapid washout in RTA; complex ring sign with anarchic structure or delta sign in PDUS, and positive retention and increased uptake in the nodule in the early and delayed 99m Tc-MIBI images. These data were compared with the histopathological results. Histology revealed thyroid carcinoma in nine patients (five cases of papillary carcinoma, three of follicular carcinoma and one of medullary carcinoma) and benign conditions in 34 patients (30 cases of nodular goitre, three of lymphocytic thyroiditis and one of follicular adenoma). Sensitivity, specificity and accuracy were, respectively, 0.89, 1.00 and 0.97 for RTA, 1.00, 0.76 and 0.81 for PDUS, and 0.67, 0.91 and 0.86 for 99m Tc-MIBI scintigraphy (when nodules with increased uptake in both the early and the delayed images and a positive retention index were considered as malignant). RTA, 99m Tc-MIBI scintigraphy and PDUS could be helpful in the preoperative assessment of solitary cold thyroid nodules. In this study, RTA was found to be the most accurate and specific method for differentiation of malignant from benign thyroid nodules. (orig.)

The role of supply chain collaboration in supply chain risk mitigation

OpenAIRE

Chen, Jie

2017-01-01

In the last two decades, supply chain operations have changed drastically. Globalization of the market, shortened product life cycle, global outsourcing and offshoring, and increasing complexity of the supply base has resulted in modern supply chains becoming more vulnerable than ever. There are also more frequent natural or man-made disasters which disrupt the supply chain operations. All these have led to higher exposure of risks of supply chains and the failure to manage the...

Chained learning architectures in a simple closed-loop behavioural context

DEFF Research Database (Denmark)

Kulvicius, Tomas; Porr, Bernd; Wörgötter, Florentin

2007-01-01

are very simple and consist of single learning unit. The current study is trying to solve this problem focusing on chained learning architectures in a simple closed-loop behavioural context. METHODS: We applied temporal sequence learning (Porr B and Wörgötter F 2006) in a closed-loop behavioural system...... where a driving robot learns to follow a line. Here for the first time we introduced two types of chained learning architectures named linear chain and honeycomb chain. We analyzed such architectures in an open and closed-loop context and compared them to the simple learning unit. CONCLUSIONS...

A chain-retrieval model for voluntary task switching.

Science.gov (United States)

Vandierendonck, André; Demanet, Jelle; Liefooghe, Baptist; Verbruggen, Frederick

2012-09-01

To account for the findings obtained in voluntary task switching, this article describes and tests the chain-retrieval model. This model postulates that voluntary task selection involves retrieval of task information from long-term memory, which is then used to guide task selection and task execution. The model assumes that the retrieved information consists of acquired sequences (or chains) of tasks, that selection may be biased towards chains containing more task repetitions and that bottom-up triggered repetitions may overrule the intended task. To test this model, four experiments are reported. In Studies 1 and 2, sequences of task choices and the corresponding transition sequences (task repetitions or switches) were analyzed with the help of dependency statistics. The free parameters of the chain-retrieval model were estimated on the observed task sequences and these estimates were used to predict autocorrelations of tasks and transitions. In Studies 3 and 4, sequences of hand choices and their transitions were analyzed similarly. In all studies, the chain-retrieval model yielded better fits and predictions than statistical models of event choice. In applications to voluntary task switching (Studies 1 and 2), all three parameters of the model were needed to account for the data. When no task switching was required (Studies 3 and 4), the chain-retrieval model could account for the data with one or two parameters clamped to a neutral value. Implications for our understanding of voluntary task selection and broader theoretical implications are discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

Supply Chain Simulation : A Survey

NARCIS (Netherlands)

Kleijnen, J.P.C.

2003-01-01

This paper provides a survey of simulation in supply chain management.It reviews four types of simulation, namely spreadsheet simulation, system dynamics, discreteevent simulation, and business games.Which simulation type should be applied, depends on the type of managerial question to be answered

Soliton Analysis in Complex Molecular Systems: A Zig-Zag Chain

Science.gov (United States)

Christiansen, P. L.; Savin, A. V.; Zolotaryuk, A. V.

1997-06-01

A simple numerical method for seeking solitary wavesolutions of a permanent profile in molecular systems of big complexity is presented. The method is essentially based on the minimization of a finite-dimensional function which is chosen under an appropriate discretization of time derivatives in equations of motion. In the present paper, it is applied to a zig-zag chain backbone of coupled particles, each of which has twodegrees of freedom (longitudinal and transverse). Both topological and nontopological soliton solutions are treated for this chain when it is (i) subjected to a two-dimensional periodic substrate potential or (ii) considered as an isolated object, respectively. In the first case, which may be considered as a zig-zag generalization of the Frenkel-Kontorova chain model, two types of kink solutions with different topological charges, describing vacancies of one or two atoms (I- or II-kinks) and defects with excess one or two atoms in the chain (I- or II-antikinks), have been found. The second case (isolated chain) is a generalization of the well-known Fermi-Pasta-Ulam chain model, which takes into account transverse degrees of freedom of the chain molecules. Two types of stable nontopological soliton solutions which describe either (i) a supersonic solitary wave of longitudinal stretching accompanied by transverse slendering or (ii) supersonic pulses of longitudinal compression propagating together with localized transverse thickening (bulge) have been obtained.

A comparison of radionuclide thyroid angiography, {sup 99m}Tc-MIBI scintigraphy and power Doppler ultrasonography in the differential diagnosis of solitary cold thyroid nodules

Energy Technology Data Exchange (ETDEWEB)

Demirel, Koray; Kapucu, Oezlem [Department of Nuclear Medicine, Gazi University School of Medicine, Ankara (Turkey); Yuecel, Cem; Oezdemir, Hakan [Department of Radiology, Gazi University School of Medicine, Ankara (Turkey); Ayvaz, Goeksun [Department of Endocrinology and Metabolic Diseases, Gazi University School of Medicine, Ankara (Turkey); Taneri, Ferit [Department of Surgery, Gazi University School of Medicine, Ankara (Turkey)

2003-05-01

We prospectively studied 43 patients with solitary cold thyroid nodules greater than 1.5 cm in diameter to determine the comparative diagnostic value of radionuclide thyroid angiography (RTA), technetium-99m methoxyisobutylisonitrile ({sup 99m}Tc-MIBI) scintigraphy and power Doppler ultrasonography (PDUS) in the differentiation of benign and malignant thyroid nodules. Perfusion of the nodules in RTA was compared with the perfusion in the surrounding normal thyroid tissue and classified as follows: 0, avascular; 1, hypovascular; 2, isovascular; 3, hypervascular. {sup 99m}Tc-MIBI uptake in the nodules compared with that in surrounding thyroid tissue was scored for both early and delayed images as follows: 0, cold; 1, decreased; 2, equal; 3, increased. PDUS patterns were classified as nodule vascularisation patterns. The malignancy criteria were set as follows: hypervascular nodule with rapid washout in RTA; complex ring sign with anarchic structure or delta sign in PDUS, and positive retention and increased uptake in the nodule in the early and delayed {sup 99m}Tc-MIBI images. These data were compared with the histopathological results. Histology revealed thyroid carcinoma in nine patients (five cases of papillary carcinoma, three of follicular carcinoma and one of medullary carcinoma) and benign conditions in 34 patients (30 cases of nodular goitre, three of lymphocytic thyroiditis and one of follicular adenoma). Sensitivity, specificity and accuracy were, respectively, 0.89, 1.00 and 0.97 for RTA, 1.00, 0.76 and 0.81 for PDUS, and 0.67, 0.91 and 0.86 for {sup 99m}Tc-MIBI scintigraphy (when nodules with increased uptake in both the early and the delayed images and a positive retention index were considered as malignant). RTA, {sup 99m}Tc-MIBI scintigraphy and PDUS could be helpful in the preoperative assessment of solitary cold thyroid nodules. In this study, RTA was found to be the most accurate and specific method for differentiation of malignant from benign

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

Science.gov (United States)

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

Economy system and operation of a selected retail chain

OpenAIRE

KALUSOVÁ, Monika

2011-01-01

The goal of the thesis Economy system and operation of a selected retail chain is to explore and analyze the sphere in which the retailer chain operates, and evaluate their financial situation. At the same time, the selected retail chain will compare with the selected sectoral competition. The first part of thesis covers the theoretical information about issues, in particular the definition of basic terms of trade and retail. The second part of thesis includes application theoretical knowledg...

DOS cones along atomic chains

International Nuclear Information System (INIS)

Kwapiński, Tomasz

2017-01-01

The electron transport properties of a linear atomic chain are studied theoretically within the tight-binding Hamiltonian and the Green’s function method. Variations of the local density of states (DOS) along the chain are investigated. They are crucial in scanning tunnelling experiments and give important insight into the electron transport mechanism and charge distribution inside chains. It is found that depending on the chain parity the local DOS at the Fermi level can form cone-like structures (DOS cones) along the chain. The general condition for the local DOS oscillations is obtained and the linear behaviour of the local density function is confirmed analytically. DOS cones are characterized by a linear decay towards the chain which is in contrast to the propagation properties of charge density waves, end states and Friedel oscillations in one-dimensional systems. We find that DOS cones can appear due to non-resonant electron transport, the spin–orbit scattering or for chains fabricated on a substrate with localized electrons. It is also shown that for imperfect chains (e.g. with a reduced coupling strength between two neighboring sites) a diamond-like structure of the local DOS along the chain appears. (paper)

DOS cones along atomic chains

Science.gov (United States)

Kwapiński, Tomasz

2017-03-01

The electron transport properties of a linear atomic chain are studied theoretically within the tight-binding Hamiltonian and the Green’s function method. Variations of the local density of states (DOS) along the chain are investigated. They are crucial in scanning tunnelling experiments and give important insight into the electron transport mechanism and charge distribution inside chains. It is found that depending on the chain parity the local DOS at the Fermi level can form cone-like structures (DOS cones) along the chain. The general condition for the local DOS oscillations is obtained and the linear behaviour of the local density function is confirmed analytically. DOS cones are characterized by a linear decay towards the chain which is in contrast to the propagation properties of charge density waves, end states and Friedel oscillations in one-dimensional systems. We find that DOS cones can appear due to non-resonant electron transport, the spin-orbit scattering or for chains fabricated on a substrate with localized electrons. It is also shown that for imperfect chains (e.g. with a reduced coupling strength between two neighboring sites) a diamond-like structure of the local DOS along the chain appears.

The design of supply chains

DEFF Research Database (Denmark)

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature studyAbstract Argues stability is a design objective for supply chain design alongside cost, leadtime and responsiveness. Performs an extensive literature study on supply chain design,identifies methods, theories and objectives...... in the existing literature. Describes the conceptexternal specificity and how it's used to design supply chains. Using the concept upstream,archetypes of risk minimal and maximal design are identified. Downstream the conceptdescribes two viable scenarios, one minimizing the impact, the other minimizing...... theprobability of (intended) departure of a supply chain partner. Finally, principles for supplychain design are described and managerial outlined....

Method of identification of unbranched chain reaction with cross termination of chain

International Nuclear Information System (INIS)

Poluehktov, V.A.; Begishev, I.R.

1977-01-01

Gas-phase chlorination of unsymmetrical difluoroethane initiated by gamma quanta of Co 60 has been studied. At decreased temperatures the only hydrogen is replaced by a chlorine atom. Over a wide range of ratios of the initial reagents, the reaction occurs with a chain rupture. An analysis of the kinetics of such a reaction provides a method for identification of an unbranched chain reaction with a cross-rupture of the chain

Identification and expression analysis of a novel R-type lectin from the coleopteran beetle, Tenebrio molitor.

Science.gov (United States)

Kim, Dong Hyun; Patnaik, Bharat Bhusan; Seo, Gi Won; Kang, Seong Min; Lee, Yong Seok; Lee, Bok Luel; Han, Yeon Soo

2013-11-01

We have identified novel ricin-type (R-type) lectin by sequencing of random clones from cDNA library of the coleopteran beetle, Tenebrio molitor. The cDNA sequence is comprised of 495 bp encoding a protein of 164 amino acid residues and shows 49% identity with galectin of Tribolium castaneum. Bioinformatics analysis shows that the amino acid residues from 35 to 162 belong to ricin-type beta-trefoil structure. The transcript was significantly upregulated after early hours of injection with peptidoglycans derived from Gram (+) and Gram (-) bacteria, beta-1, 3 glucan from fungi and an intracellular pathogen, Listeria monocytogenes suggesting putative function in innate immunity. Copyright © 2013 Elsevier Inc. All rights reserved.

Proximity annealing of sulfur-implanted gallium arsenide using a strip heater

International Nuclear Information System (INIS)

Banerjee, S.; Baker, J.

1985-01-01

A graphite strip heater has been employed for rapid (-- 30 s) thermal annealing (RTA), at temperatures between 850 and 1150 0 C, of Cr-doped GaAs implanted with 120 keV 32 S + with doses between 10 13 and 10 15 cm -2 . In order to minimize the incongruent evaporation of As, proximity anneals were employed by protecting the implanted samples with GaAs cover pieces. RTA yields electrical activation and donor mobilities better than or comparable to furnace annealing, with less redistribution of the implanted S and background Cr. (author)

Force decay evaluation of thermoplastic and thermoset elastomeric chains: A mechanical design comparison.

Science.gov (United States)

Masoud, Ahmed I; Tsay, T Peter; BeGole, Ellen; Bedran-Russo, Ana K

2014-11-01

To compare the following over a period of 8 weeks: (1) force decay between thermoplastic (TP) and thermoset (TS) elastomeric chains; (2) force decay between light (200-g) and heavy (350-g) initial forces; and (3) force decay between direct chains and chain loops (stretched from one pin around the second pin and back to the first pin). TP and TS chains were obtained from American Orthodontics™ (AOTP, AOTS) and ORMCO™ (OrTP, OrTS). Each of the four chain groups was subdivided into four subgroups with 10 specimens per subgroup: (1) direct chains light force, (2) direct chains heavy force, (3) chain loops light force, and (4) chain loops heavy force. The experiment was performed in artificial saliva (pH of 6.75) at 37°C. A significant difference was found between TP and TS chains, with an average mean difference of around 20% more force decay found in the TP chains (P < .001, α  =  .05). There was no significant difference between direct chains and chain loops except in OrTP, in which direct chains showed more force decay. There was also no significant difference in force decay identified when using light vs heavy forces. TS chains decayed less than TP chains, and chain loop retraction was beneficial only when using OrTP chains. Contrary to the interchangeable use of TP and TS chains in the published literature and in clinical practice, this study demonstrates that they perform differently under stress and that a clear distinction should be made between the two.

Designing a new supply chain for competition against an existing supply chain

NARCIS (Netherlands)

Rezapour, S.; Farahani, R.Z.; Dullaert, W.E.H.; de Borger, B.

2014-01-01

We develop a bi-level model for designing an entrant supply chain (SC) in the presence of a pre-existing competing SC where demand is elastic with respect to price and distance. The model assumes dynamic competition between the new and pre-existing SCs in retailers' level and probabilistic

Coordinating a Supply Chain with a Loss-Averse Retailer and Effort Dependent Demand

Science.gov (United States)

Li, Liying

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights. PMID:25197696

Coordinating a supply chain with a loss-averse retailer and effort dependent demand.

Science.gov (United States)

Li, Liying; Wang, Yong

2014-01-01

This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights.

The Service-profit Chain

DEFF Research Database (Denmark)

Grønholdt, Lars; Martensen, Anne

2016-01-01

This paper examines the links between employee attitudes, customer loyalty and company profitability. From a conceptual point of view, this employee-customer-profit chain, also known as the service-profit chain, is well founded and generally accepted. But for many companies, it seems difficult...... to demonstrate such links, and several issues must be addressed to uncover the links. To investigate these links empirically, a hotel chain provided data matching employee and customer measures with measures of profitability. We have successfully employed a modeling approach, and the paper reports empirical...... evidence of the employee-customer-profit chain. As it is possible to estimate the links, we have demonstrated their effect on company profitability. The research findings provide a better understanding of the service-profit chain and may help practitioners in improving company financial performance....

Plastic value chains

DEFF Research Database (Denmark)

Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

2014-01-01

Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example......, plastics from WEEE is chosen as a Nordic case study. The project aims to propose a number of improvements for this value chain together with representatives from Nordic stakeholders. Based on the experiences made, a guide for other plastic value chains shall be developed....

Project Decision Chain

DEFF Research Database (Denmark)

Rolstadås, Asbjørn; Pinto, Jeffrey K.; Falster, Peter

2015-01-01

To add value to project performance and help obtain project success, a new framework for decision making in projects is defined. It introduces the project decision chain inspired by the supply chain thinking in the manufacturing sector and uses three types of decisions: authorization, selection......, and plan decision. A primitive decision element is defined where all the three decision types can be accommodated. Each task in the primitive element can in itself contain subtasks that in turn will comprise new primitive elements. The primitive elements are nested together in a project decision chain....

A chain of microphones

International Nuclear Information System (INIS)

1994-07-01

In order to discover a more accurate and selective measuring method for the identification of individual flow-noise pollution sources on wind turbines blades, measuring equipment based on a chain of microphones was developed. The principle underlying the design of this equipment is that signals from a number of microphones can be interpreted. Thus the microphones can register noise from sections of the rotary blade and unwished-for noise is eliminated. The gating technique ensures that noises from individual blades can be separated and that clarity is improved. In addition to this, noise can be determined close to the source. The chain consists of 8 microphones placed in a row at adjustable distances. Measurements are registered on tapes as are the trigger signals for the blade passage. The computer processes the measurement results and unnecessary noise is depressed. The listening angles can also be changed electronically so that the doppler effect can be corrected. Results confirmed that the equipment operated satisfactorily and could also be used in relation to noise pollution in power plants as it is especially effective in depressing excess, and cutting out outside, noise and registers accurately individual sources of noise helped by its ability to ''listen '' at varying angles to the source. (AB)

Plasmonic nanoparticle chain in a light field: a resonant optical sail.

Science.gov (United States)

Albaladejo, Silvia; Sáenz, Juan José; Marqués, Manuel I

2011-11-09

Optical trapping and driving of small objects has become a topic of increasing interest in multidisciplinary sciences. We propose to use a chain made of metallic nanoparticles as a resonant light sail, attached by one end point to a transparent object and propelling it by the use of electromagnetic radiation. Driving forces exerted on the chain are theoretically studied as a function of radiation's wavelength and chain's alignments with respect to the direction of radiation. Interestingly, there is a window in the frequency spectrum in which null-torque equilibrium configuration, with minimum geometric cross section, corresponds to a maximum in the driving force.

The design of supply chains

OpenAIRE

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature study Abstract Argues stability is a design objective for supply chain design alongside cost, lead time and responsiveness. Performs an extensive literature study on supply chain design, identifies methods, theories and objectives in the existing literature. Describes the concept external specificity and how it’s used to design supply chains. Using the concept upstream, archetypes of risk minimal and maximal desi...

Post-annealing effects on shallow-junction characteristics caused by 20 keV BGe molecular ion implantation

International Nuclear Information System (INIS)

Liang, J.H.; Sang, Y.J.; Wang, C.-H.; Wang, T.W.; Hsu, J.Y.; Niu, H.; Tseng, M.S.

2005-01-01

This study examines the post-annealing-dependent behaviors of the shallow junction produced by implanting 10 15 cm -2 20 keV BGe ions into n-type silicon specimens. Post-annealing treatments consisted of one- and two-step annealing including both furnace annealing (FA) and rapid thermal annealing (RTA). Comparison of the one-step FA at 550 deg. C and the one-step RTA at 1050 deg. C revealed that boron depth profiles were slightly diffused in the former but exhibited considerable transient-enhanced diffusion (TED) in the latter. However, both the one-step FA- and RTA-annealed germanium depth profiles barely diffused, while the latter diffusing slightly deeper than the former. The optimum value of junction depth (x j ) times sheet resistance (R s ) was obtained with one-step FA at 550 deg. C for 1 h. The two-step annealing (FA at 550 deg. C and RTA at 1050 deg. C) results showed that the RTA-induced TED in the boron depth profiles could be effectively retarded only when FA took place for more than 3 h. Again, germanium depth profiles are also barely diffused while the corresponding TEDs were larger than those in one-step FA but smaller than those in one-step RTA. Furthermore, the two-step annealing of FA at 550 deg. C for 3 h followed by RTA at 1050 deg. C for 30 s is suggested when attempting to obtain an optimum value of x j R s

Innovation in a multiple-stage, multiple-product food marketing chain

DEFF Research Database (Denmark)

Baker, Alister Derek; Christensen, Tove

A model of a 3-stage food marketing chain is presented for the case of two products. Its extension of existing work is its capacity to examine non-competitive input and output markets in two marketing chains at once, and have them related by demand and cost interactions. The simulated impacts...... of market power in a single chain generally reproduce those delivered by previous authors. The impacts of market power in related chains are found to depend on linkages between chains in terms of interactions in consumer demand. Interactions between products in costs (economies of scope) generate...... an interesting result in that a possible market failure is identified that may be offset by the exercise of market power. The generation of farm-level innovation is seen to be largely unaffected by market power, but where market power is exercised the benefits are extracted from farmers and consumers...

Pharmaceutical supply chain risks: a systematic review

Science.gov (United States)

2013-01-01

Introduction Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. Objective In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Methods Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Results Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. Conclusion It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies. PMID:24355166

Pharmaceutical supply chain risks: a systematic review.

Science.gov (United States)

Jaberidoost, Mona; Nikfar, Shekoufeh; Abdollahiasl, Akbar; Dinarvand, Rassoul

2013-12-19

Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies.

Fragmentation kinetics of a Morse oscillator chain under tension

International Nuclear Information System (INIS)

Stember, Joseph N.; Ezra, Gregory S.

2007-01-01

The bond dissociation kinetics of tethered atomic (Morse potential) chains under tensile stress is studied. Both RRKM (fully anharmonic, Monte Carlo) and RRK (harmonic appproximation) theory are applied to predict bond dissociation rate constants as a function of energy and tensile force. For chains with N ≥ 3 atoms a hybrid statistical theory is used involving a harmonic approximation for motion in the transition state for bond dissociation. For chains with N = 2-5 atoms, while the RRK approximation significantly overestimates the dissociation rate constant, the fully anharmonic RRKM rate is quite close to simulation results. For the N = 2 chain, a novel approach to the extraction of decay rate constants based on the classical spectral theorem is implemented. Good agreement between the RRKM and dynamical rate constants is obtained for N = 2 despite the fact that the reactant phase space contains a significant fraction of relatively short-lived trajectories

Soliton analysis in complex molecular systems: A zig-zag chain

International Nuclear Information System (INIS)

Christiansen, P.L.; Savin, A.V.; Zolotaryuk, A.V.

1997-01-01

A simple numerical method for seeking solitary wave solutions of a permanent profile in molecular systems of big complexity is presented. The method is essentially based on the minimization of a finite-dimensional function which is chosen under an appropriate discretization of time derivatives in equations of motion. In the present paper, it is applied to a zig-zag chain backbone of coupled particles, each of which has two degrees of freedom (longitudinal and transverse). Both topological and nontopological soliton solutions are treated for this chain when it is (i) subjected to a two-dimensional periodic substrate potential or (ii) considered as an isolated object, respectively. In the first case, which may be considered as a zig-zag generalization of the Frenkel-Kontorova chain model, two types of kink solutions with different topological charges, describing vacancies of one or two atoms (I- or II-kinks) and defects with excess one or two atoms in the chain (I- or II-antikinks), have been found. The second case (isolated chain) is a generalization of the well-known Fermi-Pasta-Ulam chain model, which takes into account transverse degrees of freedom of the chain molecules. Two types of stable nontopological soliton solutions which describe either (i) a supersonic solitary wave of longitudinal stretching accompanied by transverse slandering or supersonic pulses of longitudinal compression propagating together with localized transverse thickening (bulge) have been obtained. 32 refs., 11 figs

Value Chain Analysis in Interfirm Relationships: A Field Study.

NARCIS (Netherlands)

Dekker, H.C.

2003-01-01

Interfirm relationships introduce new challenges for management accounting. One such challenge is the provision of information for the coordination and optimization of activities across firms in a value chain. According to the literature, a value chain analysis (VCA) is a useful tool to meet this

Direct observation of the edge spin structure and chain length dependence of a finite haldane chain by high field ESR measurements

International Nuclear Information System (INIS)

Yoshida, Makoto; Ohta, Hitoshi; Ito, Toshimitsu; Ajiro, Yoshitami

2006-01-01

We have performed high field and multi-frequency ESR measurements of finite length S=1 antiferromagnetic chains in Y 2 BaNi 0.96 Mg 0.04 O 5 . Owing to the high spectral resolution by high fields and high frequencies, observed ESR signals can be separated into the contributions of the finite chains with various chain lengths. Our results clearly show that the edge spins actually interact with each other through the quantum spin chain and the interaction depends on the chain length N. (author)

Optimization of Markov chains for a SUSY fitter: Fittino

Energy Technology Data Exchange (ETDEWEB)

Prudent, Xavier [IKTP, Technische Universitaet, Dresden (Germany); Bechtle, Philip [DESY, Hamburg (Germany); Desch, Klaus; Wienemann, Peter [Universitaet Bonn (Germany)

2010-07-01

A Markov chains is a ''random walk'' algorithm which allows an efficient scan of a given profile and the search of the absolute minimum, even when this profil suffers from the presence of many secondary minima. This property makes them particularly suited to the study of Supersymmetry (SUSY) models, where minima have to be found in up-to 18-dimensional space for the general MSSM. Hence the SUSY fitter ''Fittino'' uses a Metropolis*Hastings Markov chain in a frequentist interpretation to study the impact of current low -energy measurements, as well as expected measurements from LHC and ILC, on the SUSY parameter space. The expected properties of an optimal Markov chain should be the independence of final results with respect to the starting point and a fast convergence. These two points can be achieved by optimizing the width of the proposal distribution, that is the ''average step length'' between two links in the chain. We developped an algorithm for the optimization of the proposal width, by modifying iteratively the width so that the rejection rate be around fifty percent. This optimization leads to a starting point independent chain as well as a faster convergence.

Value Chain Model for Steel Manufacturing Sector: A Case Study

OpenAIRE

S G Acharyulu; K Venkata Subbaiah; K Narayana Rao

2018-01-01

Michael E Porter developed a value chain model for manufacturing sector with five primary activities and four supporting activities. The value chain model developed by Porter is extended to a steel manufacturing sector due to expansions of steel plants has become a continual process for their growth and survival. In this paper a value chain model for steel manufacturing sector is developed considering five primary activities and six support activities.

Grazer-induced chain lenght plasticity reduces grazing risk in a marine diatom

DEFF Research Database (Denmark)

Bergkvist, Johanna; Thor, Peter; Jakobsen, Hans Henrik

2012-01-01

. marinoi was exposed to chemical cues from caged A. tonsa without physical contact with the responding cells. The reductions in chain length significantly reduced copepod grazing; grazing rates on chains (four cells or more) were several times higher compared to that of single cells. This suggests...... that chain length plasticity is a means for S. marinoi to reduce copepod grazing. In contrast, chain length was not suppressed in cultures exposed to the microzooplankton grazer Gyrodinium dominans. Size-selective predation may have played a key role in the evolution of chain formation and chain length...... plasticity in diatoms...

Concurrent Product & Supply Chain Creation

DEFF Research Database (Denmark)

Gubi, Ebbe

it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

EMPHASIZING SOCIAL ISSUES TOWARD SUSTAINABLE SUPPLY CHAIN: A BRAZILIAN PERSPECTIVE

Directory of Open Access Journals (Sweden)

Minelle Enéas da Silva

2015-06-01

Full Text Available From sustainability perspective, the supply chain management strategy can use different indicators related to Triple Bottom Line to improve its practices. Some studies in the topic have focused only environmental issues; however in some cases the social issues should be considered as a core of the sustainable strategies. Considering this view, the paper aims to highlight the relevance of social issues in the Brazilian context toward sustainable supply chain. Therefore, a theoretical essay was conducted using the literature about sustainable supply chain in relation to the Brazilian perspective to understand how it is possible to use new approaches for a more emphasis on social issues. The discussions indicates that to re-conceptualize the social relations in supply chains, it's necessary to use corporate social responsibility and social capital approaches to create a better discussion about sustainable supply chain. The proposal starts a discussion in the Brazilian context to stimulate new scholars to study this topic.

Newton's Cradle and Entanglement Transport in a Flexible Rydberg Chain

International Nuclear Information System (INIS)

Wuester, S.; Ates, C.; Eisfeld, A.; Rost, J. M.

2010-01-01

In a regular, flexible chain of Rydberg atoms, a single electronic excitation localizes on two atoms that are in closer mutual proximity than all others. We show how the interplay between excitonic and atomic motion causes electronic excitation and diatomic proximity to propagate through the Rydberg chain as a combined pulse. In this manner entanglement is transferred adiabatically along the chain, reminiscent of momentum transfer in Newton's cradle.

Making Supply Chains Resilient to Floods Using a Bayesian Network

Science.gov (United States)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and

Chain Dynamics in Magnetorheological Suspensions

Science.gov (United States)

Gast, A. P.; Furst, E. M.

1999-01-01

Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between

Ground-state properties of a supersymmetric fermion chain

International Nuclear Information System (INIS)

Fendley, Paul; Hagendorf, Christian

2011-01-01

We analyze the ground state of a strongly interacting fermion chain with a supersymmetry. We conjecture a number of exact results, such as a hidden duality between weak and strong couplings. By exploiting a scale-free property of the perturbative expansions, we find exact expressions for the order parameters, yielding the critical exponents. We show that the ground state of this fermion chain and another model in the same universality class, the XYZ chain along a line of couplings, are both written in terms of the same polynomials. We demonstrate this explicitly for up to N = 24 sites and provide consistency checks for large N. These polynomials satisfy a recursion relation related to the Painlevé VI differential equation and, using a scale-free property of these polynomials, we derive a simple and exact formula for their N→∞ limit

Autoimmune Hepatitis with Distal Renal Tubular Acidosis and Small Bowel Partial Malrotation.

Science.gov (United States)

Kanaiyalal Modi, Tejas; Parikh, Hardik; Sadalge, Abhishek; Gupte, Amit; Bhatt, Pratin; Shukla, Akash

2015-01-01

Renal tubular acidosis (RTA) is not uncommon in patient with chronic autoimmune hepatitis (AIH), but usually remains latent. Here, we report a case of renal tubular acidosis RTA who presented with AIH. She was also diagnosed to have partial bowel malrotation. A 9-year-old girl, a case of distal RTA, presented with jaundice, abdominal distension and altered sensorium. She was diagnosed to be AIH, which was successfully treated with steroids and azathioprine. Coexistent midgut partial malrotation with volvulus was diagnosed during the treatment. She was treated successfully with anti-tuberculous treatment for cervical lymphadenitis. Autoimmune hepatitis should not be ruled out in each case of RTA presenting with jaundice. Modi TK, Parikh H, Sadalge A, Gupte A, Bhatt P, Shukla A. Autoimmune Hepatitis with Distal Renal Tubular Acidosis and Small Bowel Partial Malrotation. Euroasian J Hepato-Gastroenterol 2015;5(2):107-109.

THE ROLE OF SUPPLY CHAIN COLLABORATION ON SUSTAINABLE SUPPLY CHAIN MANAGEMENT PERFORMANCE

OpenAIRE

Ince, Huseyin; Ince, Andac Sahinbey

2015-01-01

Sustainable supply chain management and collaboration have taken big attention from academicians and practitioners. The extensive literature review is conducted to analyse the relationship between Sustainable Supply Chain Management and collaboration and its effects on performance of SSCM dimensions. Then, a framework is proposed to explain the relationship between sustainable supply chain management and collaboration. For further studies the proposed framework should be tested empirically.

On a Markov chain roulette-type game

International Nuclear Information System (INIS)

El-Shehawey, M A; El-Shreef, Gh A

2009-01-01

A Markov chain on non-negative integers which arises in a roulette-type game is discussed. The transition probabilities are p 01 = ρ, p Nj = δ Nj , p i,i+W = q, p i,i-1 = p = 1 - q, 1 ≤ W < N, 0 ≤ ρ ≤ 1, N - W < j ≤ N and i = 1, 2, ..., N - W. Using formulae for the determinant of a partitioned matrix, a closed form expression for the solution of the Markov chain roulette-type game is deduced. The present analysis is supported by two mathematical models from tumor growth and war with bargaining

Essentials of supply chain management

CERN Document Server

Hugos, Michael H

2011-01-01

The latest thinking, strategies, developments, and technologies to stay current in supply chain management Presenting the core concepts and techniques of supply chain management in a clear, concise and easily readable style, the Third Edition of Essentials of Supply Chain Management outlines the most crucial tenets and concepts of supply chain management.

Editorial: Supply Chain Management

Directory of Open Access Journals (Sweden)

Dimitrios Aidonis

2017-05-01

Full Text Available This special issue has followed up the 3rd Olympus International Conference on Supply Chains held on Athens Metropolitan Expo, November 7 & 8 2015, Greece. The Conference was organized by the Department of Logistics Technological Educational Institute of Central Macedonia, in collaboration with the: a Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH, b Greek Association of Supply Chain Management (EEL of Northern Greece and the c Supply Chain & Logistics Journal. During the 2-Days Conference more than 60 research papers were presented covering the following thematic areas: (i Transportation, (ii Best Practices in Logistics, (iii Information and Communication Technologies in Supply Chain Management, (iv Food Logistics, (v New Trends in Business Logistics, and (vi Green Supply Chain Management. Three keynote invited speakers addressed interesting issues for the Operational Research, the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

Science.gov (United States)

Coronado Mondragon, Adrian E.; Coronado, Etienne S.

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

Cultivating a disease management partnership: a value-chain model.

Science.gov (United States)

Murray, Carolyn F; Monroe, Wendy; Stalder, Sharon A

2003-01-01

Disease management (DM) is one of the health care industry's more innovative value-chain models, whereby multiple relationships are created to bring complex and time-sensitive services to market. The very nature of comprehensive, seamless DM provided through an outsourced arrangement necessitates a level of cooperation, trust, and synergy that may be lacking from more traditional vendor-customer relationships. This discussion highlights the experience of one health plan and its vendor partner and their approach to the development and delivery of an outsourced heart failure (HF) DM program. The program design and rollout are discussed within principles adapted from the theoretical framework of a value-chain model. Within the value-chain model, added value is created by the convergence and synergistic integration of the partners' discrete strengths. Although each partner brings unique attributes to the relationship, those attributes are significantly enhanced by the value-chain model, thus allowing each party to bring the added value of the relationship to their respective customers. This partnership increases innovation, leverages critical capabilities, and improves market responsiveness. Implementing a comprehensive, outsourced DM program is no small task. DM programs incorporate a broad array of services affecting nearly every department in a health plan's organization. When true seamless integration between multiple organizations with multiple stakeholders is the objective, implementation and ongoing operations can become even more complex. To effectively address the complexities presented by an HF DM program, the parties in this case moved beyond a typical purchaser-vendor relationship to one that is more closely akin to a strategic partnership. This discussion highlights the development of this partnership from the perspective of both organizations, as revealed through contracting and implementation activities. It is intended to provide insight into the program

Chain-modified radioiodinated fatty acids

International Nuclear Information System (INIS)

Otto, C.A.

1987-01-01

Several carbon chain manipulations have been studied in terms of their effects on myocardial activity levels and residence time. The manipulations examined included: chain length, chain branching, chain unsaturation, and carbon-iodine bond stabilization. It was found that chain length affects myocardial activity levels for both straight-chain alkyl acids and branched chain alkyl and aryl acids. Similar results have been reported for the straight-chain aryl acids. Generally, the longer chain lengths correlated with higher myocardial activity levels and longer residence times. This behavior is attributed to storage as triglycerides. Branched chain acids are designed to be anti-metabolites but only the aryl β-methyl acids possessed the expected time course of constant or very slowly decreasing activity levels. The alkyl β-methyl acids underwent rapid deiodination - a process apparently independent of β-oxidation. Inhibition of β-oxidation by incorporation of carbon-carbon double and triple bonds was studied. Deiodination of ω-iodo alkyl fatty acids prevented an assessment of suicide inhibition using an unsaturated alkynoic acid. Stabilization of the carbon-iodine bond by attachment of iodine to a vinylic or aryl carbon was studied. The low myocardial values and high blood values observed for an eleven carbon ω-iodo vinylic fatty acid were not encouraging but ω-iodo aryl fatty acids appear to avoid the problems of rapid deiodination. (Auth.)

Locations of Racism in Education: A Speech Act Analysis of a Policy Chain

Science.gov (United States)

Arneback, Emma; Quennerstedt, Ann

2016-01-01

This article explores how racism is located in an educational policy chain and identifies how its interpretation changes throughout the chain. A basic assumption is that the policy formation process can be seen as a chain in which international, national and local policies are "links"--separate entities yet joined. With Sweden as the…

Chain Networks as a Leverage for Innovation Capacity: The Case of Food SMEs

Directory of Open Access Journals (Sweden)

Bianka Kühne

2011-02-01

Full Text Available  Nowadays, innovation is no longer limited to the individual firm but involves increasingly the chain network in which the firm is embedded. The chain network is considered as the place where the internal and external resources of a firm are combined and transformed, leading to innovation capacity. In the increasingly globalizing market, innovation is an important strategic tool for small and medium sized enterprises (SMEs to achieve competitive advantage. However, SMEs are often confronted with barriers for developing and introducing innovations, such as the lack of economies of scale. Our paper investigates how the chain network is contributing to the enhancement of the innovation capacity and which chain network characteristics are crucial in this process. In contrast to previous studies at chain network level, in our research specific chain networks are investigated and compared to each other. Hence, data collection took place at different chain network levels, being the supplier, the food manufacturer and the customer, working together and consequently belonging to one specific and unique chain network.The analysis of innovation capacity at the chain network level is realized by means of cluster analysis. This results in a three-cluster solution dividing the sample into Non-innovator chain networks, Customer-driven innovator chain networks and food manufacturer-supplier-driven innovator chain networks. Next, the influence of the chain network on the innovation capacity is examined. Thereby, the three achieved clusters differ significantly related to certain chain network characteristics. The following characteristics form an important leverage for the innovation capacity: firm size, profitability and business growth of the chain network members, as well as higher dependency, and lower levels of integration, rewarding power, social satisfaction and collaboration. The distinction of Customer-driven and food manufacturer

Supply Chain Management

DEFF Research Database (Denmark)

Wieland, Andreas; Handfield, Robert B.

Supply chain management has made great strides in becoming a discipline with a standalone body of theories. As part of this evolution, researchers have sought to embed and integrate observed supply chain management phenomena into theoretical statements. In our review, we explore where we have been...

Assessing cold chain status in a metro city of India: an intervention ...

African Journals Online (AJOL)

... creation of a designated cold chain handler. The gaps lay in non-availability of non-electrical cold chain equipment and separate cold chain room, policy makers should stress. Cold chain handlers need reorientation training regarding heat & cold sensitive vaccines, preventive maintenance and correct contingency plan.

Molecular beam epitaxy growth of In0.52Al0.48As/In0.53Ga0.47As metamorphic high electron mobility transistor employing growth interruption and in situ rapid thermal annealing

International Nuclear Information System (INIS)

Ihn, Soo-Ghang; Jo, Seong June; Song, Jong-In

2006-01-01

We investigated the effects of high temperature (∼700 deg. C) in situ rapid thermal annealing (RTA) carried out during growth interruption between spacer and δ-doping layers of an In 0.52 Al 0.48 As/In 0.53 Ga 0.47 As metamorphic high electron mobility transistor (MHEMT) grown on a compositionally graded InGaAlAs buffer layer. The in situ RTA improved optical and structural properties of the MHEMT without degradation of transport property, while postgrowth RTA improved the structural property of the MHEMT but significantly degraded mobility due to the defect-assisted Si diffusion. The results indicate the potential of the in situ RTA for use in the growth of high-quality metamorphic epitaxial layers for optoelectronic applications requiring improved optical and electrical properties

Defining a Closed-Loop U.S. Aluminum Can Supply Chain Through Technical Design and Supply Chain Innovation

Science.gov (United States)

Buffington, Jack; Peterson, Ray

2013-08-01

The purpose of this study is to conduct a supply chain material flow analysis (MFA) for the U.S. aluminum can market, consistent with studies conducted for the overall worldwide aluminum industry. A technical definition of the use of alloys 5182 and 3104 is conducted by metallurgists for use in the "aluminum can" MFA. Four propositions are created: technical, economic, and supply chain factors are as important to secondary aluminum recycling in an aluminum can as higher recycling rates (P1); the development of a unialloy aluminum can will increase reuse rates, but recycling rates must increase for this to happen (P2); a closed-loop aluminum can supply chain is not able to be fully realized in today's environment but is very useful for understanding improvement through both supply and demand (P3); and UBC supply can improve through a "voluntary deposit-refund system" approach (P4).

Managing Risk in Supply Chain: A Model for the Classification of Potential Threats to Efficient Supply Chain Operation

OpenAIRE

H.P. Borgman; Wilfred Rachan

2009-01-01

This article resulted from our study of 3 manufacturing centric supply chain operations in Singapore through 4 iterations of Action Research (AR) guided by Gowin’s V (Rachan, 2007). Although, there is substantial volume of literature on the topic of Supply Chain Management, it came to our attention during the literature review stage of research process, that major concentration of literature was in SCM design and optimization or supply chain performance benchmarking. Almost all of the liter...

A Bayesian Network as a tool to measure Supply Chain Resilience

NARCIS (Netherlands)

Wagenberg, van C.P.A.; Aramyan, L.H.; Lauwere, de C.C.; Gielen-Meuwissen, M.P.M.; Timmer, M.J.; Willems, D.J.M.

2018-01-01

Resilience frameworks and tools are generally qualitative. The Diagnostic Tool presented in this paper provides a quantitative tool in the area of supply chain resilience. It is among the first tools to quantify the complex concept of resilience. We apply the tool to a sustainable pork chain in the

A Review of Supply Chain Management using Multi-Agent System

OpenAIRE

Vivek Kumar; S Srinivasan

2010-01-01

Supply chain consist of various components/ identities like supplier, manufacturer, factories, warehouses, distributions agents etc. These identities are involved for supplying raw materials, components which reassembles in factory to produce a finished product. With the increasing importance of computerbased communication technologies, communication networks are becoming crucial in supply chain management. Given the objectives of the supply chain: to have the right products in the right quan...

Properties of Confined Star-Branched and Linear Chains. A Monte Carlo Simulation Study

International Nuclear Information System (INIS)

Romiszowski, P.; Sikorski, A.

2004-01-01

A model of linear and star-branched polymer chains confined between two parallel and impenetrable surfaces was built. The polymer chains were restricted to a simple cubic lattice. Two macromolecular architectures of the chain: linear and star branched (consisted of f = 3 branches of equal length) were studied. The excluded volume was the only potential introduced into the model (the athermal system). Monte Carlo simulations were carried out using a sampling algorithm based on chain's local changes of conformation. The simulations were carried out at different confinement conditions: from light to high chain's compression. The scaling of chain's size with the chain length was studied and discussed. The influence of the confinement and the macromolecular architecture on the shape of a chain was studied. The differences in the shape of linear and star-branched chains were pointed out. (author)

Radiation induced solid-state polymerization of long-chain acrylates containing fluorocarbon chain

International Nuclear Information System (INIS)

Shibasaki, Y.; Zhu, Zhi-Qin

1995-01-01

γ-Ray irradiation post-polymerizations of long-chain acrylates containing fluorocarbon chain, H(CF 2 ) 10 CH 2 OCOCH=CH 2 and H(CF 2 ) 8 CH 2 OCOCH=CH 2 , were investigated and also the structures and thermal properties of comb-like polymers obtained were studied. It was found that these monomers exhibited very high polymerizability at wide temperature ranges around the melting points. Because the fluorocarbon chains are less flexible and thicker than the hydrocarbon chains, it can be expected that the aggregation force among the monomer molecules is strong and the conformational freedom of functional group for polymerization is large. According to the DSC and the X-ray diffraction measurements of the comb-like polymers obtained, the fluorocarbon chains are aggregated in a mode of hexagonal packing in the lamellar crystals. This situation can be considered as an optimum condition for the γ-ray irradiation post-polymerization. (author)

DMFC Performance of Polymer Electrolyte Membranes Prepared from a Graft-Copolymer Consisting of a Polysulfone Main Chain and Styrene Sulfonic Acid Side Chains

Directory of Open Access Journals (Sweden)

Nobutaka Endo

2016-08-01

Full Text Available Polymer electrolyte membranes (PEMs for direct methanol fuel cell (DMFC applications were prepared from a graft-copolymer (PSF-g-PSSA consisting of a polysulfone (PSF main chain and poly(styrene sulfonic acid (PSSA side chains with various average distances between side chains (Lav and side chain lengths (Lsc. The polymers were synthesized by grafting ethyl p-styrenesulfonate (EtSS on macro-initiators of chloromethylated polysulfone with different contents of chloromethyl (CM groups, and by changing EtSS content in the copolymers by using atom transfer radical polymerization (ATRP. The DMFC performance tests using membrane electrode assemblis (MEAs with the three types of the PEMs revealed that: a PSF-g-PSSA PEM (SF-6 prepared from a graft copolymer with short average distances between side chains (Lav and medium Lsc had higher DMFC performance than PEMs with long Lav and long Lsc or with short Lav and short Lsc. SF-6 had about two times higher PDmax (68.4 mW/cm2 than Nafion® 112 at 30 wt % of methanol concentration. Furthermore, it had 58.2 mW/cm2 of PDmax at 50 wt % of methanol concentration because of it has the highest proton selectivity during DMFC operation of all the PSF-g-PSSA PEMs and Nafion® 112.

Supply chain dynamics in healthcare services.

Science.gov (United States)

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

Effects of rapid thermal annealing on the optical and electrical properties of InN epilayers

International Nuclear Information System (INIS)

Shu, G W; Wu, P F; Liu, Y W; Wang, J S; Shen, J L; Lin, T Y; Pong, P J; Chi, G C; Chang, H J; Chen, Y F; Lee, Y C

2006-01-01

We studied the optical and electrical properties of InN epilayers with rapid thermal annealing (RTA). The intensity of the photoluminescence (PL) and the carrier mobility were found to increase as the temperature of RTA was increased. We suggest that the formation of compensating acceptors (indium vacancies) after RTA is responsible for the improvement of the quality in InN. The dependence of the PL emission peak on carrier concentration provides a possible method for estimating the carrier concentration in degenerate InN. (letter to the editor)

Cold chain management in meat storage, distribution and retail: A review

Science.gov (United States)

Nastasijević, I.; Lakićević, B.; Petrović, Z.

2017-09-01

Meat is a perishable product with a short shelf life and therefore short selling times. Therefore, cold chain management in meat supply is of utmost importance for the maintenance of quality and safety of meat/meat products. Raw meat/meat products are likely to support the growth of pathogenic microorganisms and/or spoilage bacteria, and should be kept at temperatures that do not result in a risk to health. The cold chain should not be interrupted at all times along the meat distribution chain. The complexity of global meat supply chain, with frequently long distribution chains associated with transportation of the product within one country, from one to another country and from one to another continent, makes the solutions for the chilling and freezing regimes, as well as monitoring of time-temperature profiles, very important for the overall success in delivery of product which will be accepted by consumer for its freshness and safety levels. From recently, there are several available options for control and management of the cold chain, such as chilled and frozen storage combinations, superchilling, ionizing radiation, biopreservation, high hydrostatic pressure (HHP), active packaging, wireless sensors, supported with the software-based cold chain database (CCD).

Crystallisation and chain conformation of long chain n-alkanes

International Nuclear Information System (INIS)

Gorce, J.

2000-06-01

Hydrocarbon chains are a basic component in a number of systems as diverse as biological membranes, phospholipids and polymers. A better understanding of the physical properties of n-alkane chains should provide a better understanding of these more complex systems. With this aim, vibrational spectroscopy has been extensively used. This technique, sensitive to molecular details, is the only one able to both identify and quantify conformational disorder present in paraffinic systems. To achieve this, methyl deformations have been widely used as ''internal standards'' for the normalisation of peak areas. However, in the case of n-alkanes with short chain length, such as n-C 44 H 90 for example, the infrared spectra recorded at liquid nitrogen temperature and reported here show the sensitivity of these latter peaks to the various crystal structures formed. Indeed, the main frequencies of the symmetric methyl bending mode were found between 1384 cm -1 and 1368 cm -1 as a function of the crystal form. Changes in the frequency of the first order of the L.A.M. present in the Raman spectra were also observed. At higher temperatures, non all-trans conformers, inferred from different infrared bands present in the wagging mode region, were found to be essentially placed at the end of the n-alkane chains. At the monoclinic phase transition, the concentration of end-gauche conformers, proportional to the area of the infrared band at 1342 cm -1 , increases abruptly. On the contrary, in the spectra recorded at liquid nitrogen temperature no such band is observed. We also studied the degree of disorder in two purely monodisperse long chain n-alkanes, namely n-C 198 H 398 and n-C 246 H 494 . The chain conformation as well as the tilt angle of the chains from the crystal surfaces were determined by means of low frequency Raman spectroscopy and S.A.X.S. measurements on solution-crystallised samples. The increase in the number of end-gauche conformers which was expected to occur with

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

Science.gov (United States)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.