WorldWideScience

Sample records for richardson-zaki hindered settling

  1. On the hindered settling of suspensions of mud and mud-sand mixtures

    NARCIS (Netherlands)

    Dankers, P.J.T.

    2006-01-01

    Highly concentrated suspensions are present in many natural environments. When the concentration becomes large enough, particles start to interfere with each other and their settling velocity reduces. This is called hindered settling. As a result of the reduced settling velocity, particles remain in

  2. The hyperturbid state of the water column in estuaries and rivers: the importance of hindered settling

    Science.gov (United States)

    Dijkstra, Yoeri M.; Schuttelaars, Henk M.; Winterwerp, Johan C.

    2018-03-01

    Over the last few decades, some estuaries have undergone a transition to a hyperturbid state, characterised by suspended sediment concentrations of several grammes per litre averaged over the water column. To improve our understanding of this transition and of naturally hyperturbid estuaries, we systematically identify the processes allowing for high suspended sediment concentrations using a water column (1DV) model. Under a range of realistic forcing conditions, the state of the water column can be characterised by one of two equilibrium states. The first is an erosion-limited state, in which there still is sediment available for erosion at the bed. We find that this state only occurs with relatively low concentrations. The second is a supply-limited state, in which all erodable sediment is in suspension. The concentration in this state depends entirely on the amount of sediment in the system and can potentially be very high. We identify the conditions under which the state of the water column can jump from a low to a high concentration and identify hysteresis in the transition between the two states. The mechanism responsible for this hysteresis is hindered settling. It thus follows that hyperturbidity is only possible in a supply-limited state. From this observation we derive a necessary condition for an estuarine system to make the transition from low turbidity to hyperturbidity in a 1DV context. This is an important step towards understanding why some estuaries are hyperturbid and assessing the risk that particular estuaries may become hyperturbid in the future.

  3. A numerical investigation of fine sediment resuspension in the wave boundary layer - effect of hindered settling and bedforms

    Science.gov (United States)

    Hsu, T. J.; Cheng, Z.; Yu, X.

    2016-02-01

    The wave bottom boundary layer is a major conduit delivering fine terrestrial sediments to the continental margin. Hence, studying the fine sediment resuspension in the wave boundary layer is crucial to the understanding of various components of the earth system, such as carbon cycle. By assuming the settling velocity to be a constant in each simulation, previous turbulence-resolving numerical simulations reveal the existence of three transport modes in the wave boundary layer associated with the sediment availability. As the sediment availability and hence the sediment-induced stable stratification increase, a sequence of transport modes, namely, (I) well-mixed transport, (II) formulation of lutocline resembling a two-layer system, and (III) completely laminarized transport are observed. In general, the settling velocity is a flow variable due to the floc dynamics and hindered settling. This study further investigate the effect of hindered settling. Particularly, for flocs with lower gelling concentrations, the hindered settling effect can play a key role in sustaining large amount of suspended sediment load and results in the laminarized transport (III). For the simulation with a very significant hindered settling effect due to a low gelling concentration, results also indicate the occurrence of gelling ignition, a state in which the erosion rate is always higher than the deposition rate. A condition for the occurrence of gelling ignition is proposed for a range of wave intensities as a function of sediment/floc properties and erodibility parameters. These aforementioned studies are limited to fine sediment transport over a flat bed. However, recent field and laboratory observation show that a small amount of sand fraction can lead to the formation of small bedforms, which can armor the bed while in the meantime enhance near bed turbulence. Preliminary investigation on the effect of bedforms on the resulting transport modes will also be presented.

  4. Reprint of: A numerical investigation of fine sediment resuspension in the wave boundary layer-Uncertainties in particle inertia and hindered settling

    Science.gov (United States)

    Cheng, Zhen; Yu, Xiao; Hsu, Tian-Jian; Balachandar, S.

    2016-05-01

    The wave bottom boundary layer is a major conduit delivering fine terrestrial sediments to continental margins. Hence, studying fine sediment resuspensions in the wave boundary layer is crucial to the understanding of various components of the earth system, such as carbon cycles. By assuming the settling velocity to be a constant in each simulation, previous turbulence-resolving numerical simulations reveal the existence of three transport modes in the wave boundary layer associated with sediment availabilities. As the sediment availability and hence the sediment-induced stable stratification increases, a sequence of transport modes, namely, (I) well-mixed transport, (II) formulation of lutocline resembling a two-layer system, and (III) completely laminarized transport are observed. In general, the settling velocity is a flow variable due to hindered settling and particle inertia effects. Present numerical simulations including the particle inertia suggest that for a typical wave condition in continental shelves, the effect of particle inertia is negligible. Through additional numerical experiments, we also confirm that the particle inertia tends (up to the Stokes number St = 0.2) to attenuate flow turbulence. On the other hand, for flocs with lower gelling concentrations, the hindered settling can play a key role in sustaining a large amount of suspended sediments and results in the laminarized transport (III). For the simulation with a very significant hindered settling effect due to a low gelling concentration, results also indicate the occurrence of gelling ignition, a state in which the erosion rate is always higher than the deposition rate. A sufficient condition for the occurrence of gelling ignition is hypothesized for a range of wave intensities as a function of sediment/floc properties and erodibility parameters.

  5. Edward Settle | NREL

    Science.gov (United States)

    Settle Photo of Edward Settle Edward Settle Senior Project Leader - Financing Edward.Settle energy microgrid project. He has more than 25 years of experience providing leadership and advisory projects. Research Interests Energy project finance Energy project tax matters Microgrids Resiliency

  6. A new settling velocity model to describe secondary sedimentation

    DEFF Research Database (Denmark)

    Ramin, Elham; Wágner, Dorottya Sarolta; Yde, Lars

    2014-01-01

    Secondary settling tanks (SSTs) are the most hydraulically sensitive unit operations in biological wastewater treatment plants. The maximum permissible inflow to the plant depends on the efficiency of SSTs in separating and thickening the activated sludge. The flow conditions and solids...... distribution in SSTs can be predicted using computational fluid dynamics (CFD) tools. Despite extensive studies on the compression settling behaviour of activated sludge and the development of advanced settling velocity models for use in SST simulations, these models are not often used, due to the challenges...... associated with their calibration. In this study, we developed a new settling velocity model, including hindered, transient and compression settling, and showed that it can be calibrated to data from a simple, novel settling column experimental set-up using the Bayesian optimization method DREAM...

  7. Pharmacy settles suit.

    Science.gov (United States)

    1998-10-02

    A suit was filed by an HIV-positive man against a pharmacy that inadvertently disclosed his HIV status to his ex-wife and children. His ex-wife tried to use the information in a custody battle for their two children. The suit against the pharmacy was settled, but the terms of the settlement remain confidential.

  8. A new settling velocity model to describe secondary sedimentation.

    Science.gov (United States)

    Ramin, Elham; Wágner, Dorottya S; Yde, Lars; Binning, Philip J; Rasmussen, Michael R; Mikkelsen, Peter Steen; Plósz, Benedek Gy

    2014-12-01

    Secondary settling tanks (SSTs) are the most hydraulically sensitive unit operations in biological wastewater treatment plants. The maximum permissible inflow to the plant depends on the efficiency of SSTs in separating and thickening the activated sludge. The flow conditions and solids distribution in SSTs can be predicted using computational fluid dynamics (CFD) tools. Despite extensive studies on the compression settling behaviour of activated sludge and the development of advanced settling velocity models for use in SST simulations, these models are not often used, due to the challenges associated with their calibration. In this study, we developed a new settling velocity model, including hindered, transient and compression settling, and showed that it can be calibrated to data from a simple, novel settling column experimental set-up using the Bayesian optimization method DREAM(ZS). In addition, correlations between the Herschel-Bulkley rheological model parameters and sludge concentration were identified with data from batch rheological experiments. A 2-D axisymmetric CFD model of a circular SST containing the new settling velocity and rheological model was validated with full-scale measurements. Finally, it was shown that the representation of compression settling in the CFD model can significantly influence the prediction of sludge distribution in the SSTs under dry- and wet-weather flow conditions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Numerical Modelling of Flow and Settling in Secondary Settling Tanks

    DEFF Research Database (Denmark)

    Dahl, Claus Poulsen

    This thesis discusses the development of a numerical model for the simulation of secondary settling tanks. In the first part, the status on the development of numerical models for settling tanks and a discussion of the current design practice are presented. A study of the existing numerical models...... and design practice proved a demand for further development to include numerical models in the design of settling tanks, thus improving the future settling tanks....

  10. What is 'settled Science'?

    Science.gov (United States)

    Brown, M.

    2013-12-01

    Republican strategist Frank Luntz famously advised party leaders to emphasize the lack of ';scientific certainty' about global warming because, once the public became convinced of a scientific consensus on global warming, they would accept it and policies responding to it. But philosophical work on scientific methodology puts absolute certainty out of reach. Today almost all philosophers are fallibilists, holding that every belief is subject to correction. Does it follow that an honest report of what science has to say about any topic cannot claim that the matter is settled? I defend a more confident view: much of what science has to say about the world is settled. On this view, settled science doesn't require philosophical certainty. Instead, it is based on stable agreement and practical reliability--values central to C.S. Peirce's account of the scientific method. Defending this position requires care over changes in theory that can undermine the language in which these settled points were initially expressed. It also requires epistemic modesty, since our confidence in any claim, including observational claims, depends on a kind of induction, and could, in principle, be undermined. Interestingly, this line of thought also suggests many of the central claims the historical sciences make about our world are more stable and reliable than the more theory-dependent claims we think of as central to the foundations of physics. David Hume undermined philosophical certainty about causal laws when he argued that, no matter how many times we make observations confirming a law, it could still fail the next test. This point is sometimes confused with healthy scientific skepticism, but Hume's worry has a much broader scope than scientific skepticism. For Hume each instance of a causal relation was doubtful, no matter how similar to previous instances. But scientists are diffident about applying a well-tested law only when the circumstances differ. For instance, particle

  11. Microthrix parvicella abundance associates with activated sludge settling velocity and rheology - Quantifying and modelling filamentous bulking.

    Science.gov (United States)

    Wágner, Dorottya S; Ramin, Elham; Szabo, Peter; Dechesne, Arnaud; Plósz, Benedek Gy

    2015-07-01

    The objective of this work is to identify relevant settling velocity and rheology model parameters and to assess the underlying filamentous microbial community characteristics that can influence the solids mixing and transport in secondary settling tanks. Parameter values for hindered, transient and compression settling velocity functions were estimated by carrying out biweekly batch settling tests using a novel column setup through a four-month long measurement campaign. To estimate viscosity model parameters, rheological experiments were carried out on the same sludge sample using a rotational viscometer. Quantitative fluorescence in-situ hybridisation (qFISH) analysis, targeting Microthrix parvicella and phylum Chloroflexi, was used. This study finds that M. parvicella - predominantly residing inside the microbial flocs in our samples - can significantly influence secondary settling through altering the hindered settling velocity and yield stress parameter. Strikingly, this is not the case for Chloroflexi, occurring in more than double the abundance of M. parvicella, and forming filaments primarily protruding from the flocs. The transient and compression settling parameters show a comparably high variability, and no significant association with filamentous abundance. A two-dimensional, axi-symmetrical computational fluid dynamics (CFD) model was used to assess calibration scenarios to model filamentous bulking. Our results suggest that model predictions can significantly benefit from explicitly accounting for filamentous bulking by calibrating the hindered settling velocity function. Furthermore, accounting for the transient and compression settling velocity in the computational domain is crucial to improve model accuracy when modelling filamentous bulking. However, the case-specific calibration of transient and compression settling parameters as well as yield stress is not necessary, and an average parameter set - obtained under bulking and good settling

  12. Settling of fixed erythrocyte suspension droplets

    Science.gov (United States)

    Omenyi, S. N.; Snyder, R. S.

    1983-01-01

    It is pointed out that when particles behave collectively rather than individually, the fractionation of micron-size particles on the basis of size, density, and surface characteristics by centrifugation and electrophoresis is hindered. The formation and sedimentation of droplets containing particles represent an extreme example of collective behavior and pose a major problem for these separation methods when large quantities of particles need to be fractionated. Experiments are described that measure droplet sizes and settling rates for a variety of particles and droplets. Expressions relating the particle concentration in a drop to measurable quantities of the fluids and particles are developed. The number of particles in each droplet is then estimated, together with the effective droplet density. Red blood cells from different animals fixed in glutaraldehyde provide model particle groups.

  13. Numerical Modelling and Measurement in a Test Secondary Settling Tank

    DEFF Research Database (Denmark)

    Dahl, C.; Larsen, Torben; Petersen, O.

    1994-01-01

    sludge. Phenomena as free and hindered settling and the Bingham plastic characteristic of activated sludge suspensions are included in the numerical model. Further characterisation and test tank experiments are described. The characterisation experiments were designed to measure calibration parameters...... for model description of settling and density differences. In the test tank experiments, flow velocities and suspended sludge concentrations were measured with different tank inlet geomotry and hydraulic and sludge loads. The test tank experiments provided results for the calibration of the numerical model......A numerical model and measurements of flow and settling in activated sludge suspension is presented. The numerical model is an attempt to describe the complex and interrelated hydraulic and sedimentation phenomena by describing the turbulent flow field and the transport/dispersion of suspended...

  14. Flocculent Settling of Food Wastes.

    Science.gov (United States)

    Chowdhury, Mohammad Monirul Islam; Kim, Mingu; Haroun, Basem Mikhaeil; Nakhla, George; Keleman, Michael

    2016-07-01

    This study evaluated the flocculent settling in water and municipal wastewater (MWW) in a 10.6 ft deep column. A total of eight runs at three different testing conditions involving MWW alone, food waste (FW) alone, and FW in MWW (FW+MWW) were conducted. Total suspended solid (TSS), total BOD (TBOD), total COD (TCOD), total nitrogen (TN), and total phosphorous (TP) removal efficiencies after 3 hours of settling were 62%, 46%, 49%, 46% and 62% for FW, and 50%, 43%, 39%, 37% and 24% for MWW. Removal efficiencies of particulate COD (PCOD) and particulate BOD (PBOD) at the lowest surface overflow rate (SOR) of 1.1 m3/m2/hr corresponding to the longest settling time of 3 hours were 59% and 64% for FW, and 65% and 70% for FW with MWW samples. On the other hand, no significant variation between FW and FW with MWW was observed for PN removal after 3 hours of settling.

  15. Settling velocities in batch sedimentation

    International Nuclear Information System (INIS)

    Fricke, A.M.; Thompson, B.E.

    1982-10-01

    The sedimentation of mixtures containing one and two sizes of spherical particles (44 and 62 μm in diameter) was studied. Radioactive tracing with 57 Co was used to measure the settling velocities. The ratio of the settling velocity U of uniformly sized particles to the velocity predicted to Stokes' law U 0 was correlated to an expression of the form U/U 0 = epsilon/sup α/, where epsilon is the liquid volume fraction and α is an empirical constant, determined experimentally to be 4.85. No effect of viscosity on the ratio U/U 0 was observed as the viscosity of the liquid medium was varied from 1x10 -3 to 5x10 -3 Pa.s. The settling velocities of particles in a bimodal mixture were fit by the same correlation; the ratio U/U 0 was independent of the concentrations of different-sized particles

  16. Microthrix parvicella abundance associates with activated sludge settling velocity and rheology - Quantifying and modelling filamentous bulking

    DEFF Research Database (Denmark)

    Wágner, Dorottya Sarolta; Ramin, Elham; Szabo, Peter

    2015-01-01

    The objective of this work is to identify relevant settling velocity and rheology model parameters and to assess the underlying filamentous microbial community characteristics that can influence the solids mixing and transport in secondary settling tanks. Parameter values for hindered, transient...... and compression settling velocity functions were estimated by carrying out biweekly batch settling tests using a novel column setup through a four-month long measurement campaign. To estimate viscosity model parameters, rheological experiments were carried out on the same sludge sample using a rotational...... viscometer. Quantitative fluorescence in-situ hybridisation (qFISH) analysis, targeting Microthrix parvicella and phylum Chloroflexi, was used. This study finds that M. parvicella - predominantly residing inside the microbial flocs in our samples - can significantly influence secondary settling through...

  17. Concentration-driven models revisited: towards a unified framework to model settling tanks in water resource recovery facilities.

    Science.gov (United States)

    Torfs, Elena; Martí, M Carmen; Locatelli, Florent; Balemans, Sophie; Bürger, Raimund; Diehl, Stefan; Laurent, Julien; Vanrolleghem, Peter A; François, Pierre; Nopens, Ingmar

    2017-02-01

    A new perspective on the modelling of settling behaviour in water resource recovery facilities is introduced. The ultimate goal is to describe in a unified way the processes taking place both in primary settling tanks (PSTs) and secondary settling tanks (SSTs) for a more detailed operation and control. First, experimental evidence is provided, pointing out distributed particle properties (such as size, shape, density, porosity, and flocculation state) as an important common source of distributed settling behaviour in different settling unit processes and throughout different settling regimes (discrete, hindered and compression settling). Subsequently, a unified model framework that considers several particle classes is proposed in order to describe distributions in settling behaviour as well as the effect of variations in particle properties on the settling process. The result is a set of partial differential equations (PDEs) that are valid from dilute concentrations, where they correspond to discrete settling, to concentrated suspensions, where they correspond to compression settling. Consequently, these PDEs model both PSTs and SSTs.

  18. Measuring and modeling the magnetic settling of superparamagnetic nanoparticle dispersions.

    Science.gov (United States)

    Prigiobbe, Valentina; Ko, Saebom; Huh, Chun; Bryant, Steven L

    2015-06-01

    In this paper, we present settling experiments and mathematical modeling to study the magnetic separation of superparamagnetic iron-oxide nanoparticles (SPIONs) from a brine. The experiments were performed using SPIONs suspensions of concentration between 3 and 202g/L dispersed in water and separated from the liquid under the effect of a permanent magnet. A 1D model was developed in the framework of the sedimentation theory with a conservation law for SPIONs and a mass flux function based on the Newton's law for motion in a magnetic field. The model describes both the hindering effect of suspension concentration (n) during settling due to particle collisions and the increase in settling rate due to the attraction of the SPIONs towards the magnet. The flux function was derived from the settling experiments and the numerical model validated against the analytical solution and the experimental data. Suspensions of SPIONs were of 2.8cm initial height, placed on a magnet, and monitored continuously with a digital camera. Applying a magnetic field of 0.5T of polarization, the SPION's velocity was of approximately 3·10(-5)m/s close to the magnet and decreases of two orders of magnitude across the domain. The process was characterized initially by a classical sedimentation behavior, i.e., an upper interface between the clear water and the suspension slowly moving towards the magnet and a lower interface between the sediment layer and the suspension moving away from the magnet. Subsequently, a rapid separation of nanoparticle occured suggesting a non-classical settling phenomenon induced by magnetic forces which favor particle aggregation and therefore faster settling. The rate of settling decreased with n and an optimal condition for fast separation was found for an initial n of 120g/L. The model agrees well with the measurements in the early stage of the settling, but it fails to describe the upper interface movement during the later stage, probably because of particle

  19. Research advances and challenges in one-dimensional modeling of secondary settling tanks--a critical review.

    Science.gov (United States)

    Li, Ben; Stenstrom, M K

    2014-11-15

    Sedimentation is one of the most important processes that determine the performance of the activated sludge process (ASP), and secondary settling tanks (SSTs) have been frequently investigated with the mathematical models for design and operation optimization. Nevertheless their performance is often far from satisfactory. The starting point of this paper is a review of the development of settling theory, focusing on batch settling and the development of flux theory, since they played an important role in the early stage of SST investigation. The second part is an explicit review of the established 1-D SST models, including the relevant physical law, various settling behaviors (hindered, transient, and compression settling), the constitutive functions, and their advantages and disadvantages. The third part is a discussion of numerical techniques required to solve the governing equation, which is usually a partial differential equation. Finally, the most important modeling challenges, such as settleability description, settling behavior understanding, are presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Sedimentation process and design of settling systems

    CERN Document Server

    De, Alak

    2017-01-01

    This book is designed to serve as a comprehensive source of information of sedimentation processes and design of settling systems, especially as applied to design of such systems in civil and environmental engineering. The book begins with an introduction to sedimentation as a whole and goes on to cover the development and details of various settling theories. The book traces the chronological developments of the comprehensive knowledge of settling studies and design of settling systems from 1889.A new concept of 'Velocity Profile Theorem', tool for settling problem analysis, has been employed to the analysis of the phenomenon of short circuiting. Complete theory of tube settling has been developed and its application to the computation of residual solids from the assorted solids through the same has been demonstrated. Experimental verification of the tube settling theory has also been presented. Field-oriented compatible design and operation methodology of settling system has been developed from the detailed...

  1. Contrast settling in cerebral aneurysm angiography

    International Nuclear Information System (INIS)

    Wang Zhijie; Hoffmann, Kenneth R; Guterman, Lee R; Wang Zhou; Rudin, Stephen; Meng Hui

    2005-01-01

    During angiography, blood flow is visualized with a radiopaque contrast agent, which is denser than blood. In complex vasculature, such as cerebral saccular aneurysms, the density difference may produce an appreciable gravity effect, where the contrast material separates from blood and settles along the gravity direction. Although contrast settling has been occasionally reported before, the fluid mechanics behind it have not been explored. Furthermore, the severity of contrast settling in cerebral aneurysms varies significantly from case to case. Therefore, a better understanding of the physical principles behind this phenomenon is needed to evaluate contrast settling in clinical angiography. In this study, flow in two identical groups of sidewall aneurysm models with varying parent-vessel curvature was examined by angiography. Intravascular stents were deployed into one group of the models. To detect contrast settling, we used lateral view angiography. Time-intensity curves were analysed from the angiographic data, and a computational fluid dynamic analysis was conducted. Results showed that contrast settling was strongly related to the local flow dynamics. We used the Froude number, a ratio of flow inertia to gravity force, to characterize the significance of gravity force. An aneurysm with a larger vessel curvature experienced higher flow, which resulted in a larger Froude number and, thus, less gravitational settling. Addition of a stent reduced the aneurysmal flow, thereby increasing the contrast settling. We found that contrast settling resulted in an elevated washout tail in the time-intensity curve. However, this signature is not unique to contrast settling. To determine whether contrast settling is present, a lateral view should be obtained in addition to the anteroposterior (AP) view routinely used clinically so as to rule out contrast settling and hence to enable a valid time-intensity curve analysis of blood flow in the aneurysm

  2. On time discretizations for the simulation of the batch settling-compression process in one dimension.

    Science.gov (United States)

    Bürger, Raimund; Diehl, Stefan; Mejías, Camilo

    2016-01-01

    The main purpose of the recently introduced Bürger-Diehl simulation model for secondary settling tanks was to resolve spatial discretization problems when both hindered settling and the phenomena of compression and dispersion are included. Straightforward time integration unfortunately means long computational times. The next step in the development is to introduce and investigate time-integration methods for more efficient simulations, but where other aspects such as implementation complexity and robustness are equally considered. This is done for batch settling simulations. The key findings are partly a new time-discretization method and partly its comparison with other specially tailored and standard methods. Several advantages and disadvantages for each method are given. One conclusion is that the new linearly implicit method is easier to implement than another one (semi-implicit method), but less efficient based on two types of batch sedimentation tests.

  3. Dynamic of Mud Banks In French Guiana : An Experimental Investigation of Sediment Settling Processes

    Science.gov (United States)

    Gratiot, N.; Lefebvre, J. P.

    The coast of French Guiana is characterized by the periodic northwestward migration of mud banks originated from the Amazone mouth. From previous studies, the char- acteristical size of banks has been estimated by remote sensing processing as well as their mean rate of alongshore transport. However, the physical mecanisms leading to their displacements are not yet fully quantified. The present work aimed at investigating different processes known to be involved in coastal and estuarine dynamics and expected to occur during the migration of mud banks. The relative magnitudes of flocculation, hindered settling and consolidation have been determined. The material tested has been sampled during a field survey of the french National Pro- gram of Coastal Environment (PNEC-Chantier Guyane). Settling column experiments have been performed under quiescent condition for various mean sediment concen- trations in the range of 2-110g/l. The time dependent vertical profiles of suspended sediment concentration were monitored by mean of a 32 pre-calibrated optical sen- sors device. The corresponding settling velocity was deduced from the conservation of mass equation. This study yields usefull information for a better understanding of settling processes related to the fluid mud layer observed on the forepart of the bank. Time scales of hindering and consolidation processes are larger than these of mixing mecanisms such as tides or propagating waves. Therefore, it prevents any consolidation to occur. At the opposite, the individual floc settling velocity is too small to counterbalance the turbulent mixing induced by breaking waves. The experiments also pointed out that additional flocculation by differential settling should enhance sedimentation during slack water conditions.

  4. Simulation of sediment settling in reduced gravity

    Science.gov (United States)

    Kuhn, Nikolaus; Kuhn, Brigitte; Rüegg, Hans-Rudolf; Gartmann, Andres

    2015-04-01

    Gravity has a non-linear effect on the settling velocity of sediment particles in liquids and gases due to the interdependence of settling velocity, drag and friction. However, Stokes' Law or similar empirical models, the common way of estimating the terminal velocity of a particle settling in a gas or liquid, carry the notion of a drag as a property of a particle, rather than a force generated by the flow around the particle. For terrestrial applications, this simplifying assumption is not relevant, but it may strongly influence the terminal velocity achieved by settling particles on other planetary bodies. False estimates of these settling velocities will, in turn, affect the interpretation of particle sizes observed in sedimentary rocks, e.g. on Mars and the search for traces of life. Simulating sediment settling velocities on other planets based on a numeric simulation using Navier-Stokes equations and Computational Fluid Dynamics requires a prohibitive amount of time and lacks measurements to test the quality of the results. The aim of the experiments presented in this study was therefore to quantify the error incurred by using settling velocity models calibrated on Earth at reduced gravities, such as those on the Moon and Mars. In principle, the effect of lower gravity on settling velocity can be achieved by reducing the difference in density between particle and liquid. However, the use of such analogues creates other problems because the properties (i.e. viscosity) and interaction of the liquids and sediment (i.e. flow around the boundary layer between liquid and particle) differ from those of water and mineral particles. An alternative for measuring the actual settling velocities of particles under reduced gravity, on Earth, is offered by placing a settling tube on a reduced gravity flight and conduct settling velocity measurements within the 20 to 25 seconds of Martian gravity that can be simulated during such a flight. In this presentation, the results

  5. Particle Settling in Low Energy Turbulence

    Science.gov (United States)

    Allen, Rachel; MacVean, Lissa; Tse, Ian; Mazzaro, Laura; Stacey, Mark; Variano, Evan

    2014-11-01

    Particle settling velocities can be altered by turbulence. In turbulence, dense particles may get trapped in convergent flow regions, and falling particles may be swept towards the downward side of turbulent eddies, resulting in enhanced settling velocities. The degree of velocity enhancement may depend on the Stokes number, the Rouse number, and the turbulent Reynolds number. In a homogeneous, isotropic turbulence tank, we tested the effects of particle size and type, suspended sediment concentration, and level of turbulence on the settling velocities of particles typically found in muddy estuaries. Two Acoustic Doppler Velocimeters (ADVs), separated vertically, measured turbulent velocities and suspended sediment concentrations, which yield condition dependent settling velocities, via ∂/á C ñ ∂ t = -∂/∂ z (ws á C ñ + á w ' C ' ñ) . These results are pertinent to fine sediment transport in estuaries, where high concentrations of suspended material are transported and impacted by low energy turbulence.

  6. Manipulation of Cash-Settled Futures Contracts.

    OpenAIRE

    Pirrong, Craig

    2001-01-01

    Replacement of delivery settlement of futures contracts with cash settlement is frequently proposed to reduce the frequency of market manipulation. This article shows that it is always possible to design a delivery-settled futures contract that is less susceptible to cornering by a large long than any given cash-settled contract. Such a contract is more susceptible to manipulation by large shorts, however. Therefore, cash settlement does not uniformly dominate delivery settlement as a means o...

  7. An analysis of multiple particle settling for LMR backup shutdown systems

    International Nuclear Information System (INIS)

    Brock, R.W.

    1992-05-01

    Backup shutdown systems proposed for future LMRs may employ discreet absorber particles to provide the negative reactivity insertion. When actuated, these systems release a dense packing of particles from an out-of-core region to settle into an in-core region. The multiple particle settling behavior is analyzed by the method of continuity waves. This method provides predictions of the dynamic response of the system including the average particle velocity and volume fraction of particles vs. time. Although hindered settling problems have been previously analyzed using continuity wave theory, this application represents an extension of the theory to conditions of unrestrained settling. Typical cases are analyzed and numerical results are calculated based on a semi-empirical drift-flux model. For 1/4-inch diameter boron-carbide particles in hot liquid sodium, the unrestrained settling problem assumes a steady-state solution when the average volume fraction of particles is 0.295 and the average particle velocity is 26.0 cm/s

  8. Survivors of Downsizing: Helpful and Hindering Experiences

    Science.gov (United States)

    Amundson, Norman E.; Borgen, William A.; Jordan, Sharalyn; Erlebach, Anne C.

    2004-01-01

    Thirty-one downsizing survivors from both the private and public sector were interviewed to determine incidents that either helped or hindered their transition through 1 or more organizational downsizings. A critical incident technique was used to analyze and organize the data around themes that emerged, themes were represented by both positive…

  9. When Higher Working Memory Capacity Hinders Insight

    Science.gov (United States)

    DeCaro, Marci S.; Van Stockum, Charles A., Jr.; Wieth, Mareike B.

    2016-01-01

    Higher working memory capacity (WMC) improves performance on a range of cognitive and academic tasks. However, a greater ability to control attention sometimes leads individuals with higher WMC to persist in using complex, attention-demanding approaches that are suboptimal for a given task. We examined whether higher WMC would hinder insight…

  10. Settling and sedimentation behavior of fine-grained materials

    OpenAIRE

    Nam, Sookie

    2005-01-01

    Channeling has already been an observed phenomenon that often occurs during settling and sedimentation processes of finer materials. However, it has been regarded as a minor factor affecting settling process, e.g. settling velocity or consolidation rate. In this study, settling behaviors of talcs, kaolins and attapulgite were reviewed by experiments with small and large settling columns with special focus on channel formation during sedimentation. The large settling column is equipped with tw...

  11. A Novel Model for the Entire Settling-Thickening Process in a Secondary Settling Tank.

    Science.gov (United States)

    He, Zhijiang; Zhang, Yuankai; Wang, Hongchen; Qi, Lu; Yin, Xunfei; Zhang, Xiaojun; Wen, Yang

    2016-12-01

      Sludge settling and thickening occur simultaneously in secondary settling tanks (SSTs). The ability to accurately calculate the settling and thickening capacity of activated sludge was of great importance. Despite extensive studies on the development of settling velocity models for use with SSTs, these models have not been applied due to the difficulty in calibrating the related parameters. Additionally, there have been some studies of the thickening behavior of the activated sludge in SSTs. In this study, a novel settling and thickening model for activated sludge was developed, and the model was validated using experimental data (R2 = 0.830 to 0.963, p settling and thickening behavior of the activated sludge in an SST. The application of these models requires only one critical parameter, namely, the stirred sludge volume index SSVI3.5, which is readily available in a water resource recovery facility.

  12. A numerical method for investigating crystal settling in convecting magma chambers

    Science.gov (United States)

    Verhoeven, J.; Schmalzl, J.

    2009-12-01

    Magma chambers can be considered as thermochemically driven convection systems. We present a new numerical method that describes the movement of crystallized minerals in terms of active spherical particles in a convecting magma that is represented by an infinite Prandtl number fluid. The main part focuses on the results we obtained. A finite volume thermochemical convection model for two and three dimensions and a discrete element method, which is used to model granular material, are combined. The new model is validated with floating experiments using particles of different densities and an investigation of single and multiparticle settling velocities. The resulting velocities are compared with theoretical predictions by Stokes's law and a hindered settling function for the multiparticle system. Two fundamental convection regimes are identified in the parameter space that is spanned by the Rayleigh number and the chemical Rayleigh number, which is a measure for the density of the particles. We define the T regime that is dominated by thermal convection. Here the thermal driving force is strong enough to keep all particles in suspension. As the particles get denser, they start settling to the ground, which results in a C regime. The C regime is characterized by the existence of a sediment layer with particle-rich material and a suspension layer with few particles. It is shown that the presence of particles can reduce the vigor of thermal convection. In the frame of a parameter study we discuss the change between the regimes that is systematically investigated. We show that the so-called TC transition fits a power law. Furthermore, we investigate the settling behavior of the particles in vigorous thermal convection, which can be linked to crystal settling in magma chambers. We develop an analytical settling law that describes the number of settled particles against time and show that the results fit the observations from numerical and laboratory experiments.

  13. Multiphase flow modelling of volcanic ash particle settling in water using adaptive unstructured meshes

    Science.gov (United States)

    Jacobs, C. T.; Collins, G. S.; Piggott, M. D.; Kramer, S. C.; Wilson, C. R. G.

    2013-02-01

    Small-scale experiments of volcanic ash particle settling in water have demonstrated that ash particles can either settle slowly and individually, or rapidly and collectively as a gravitationally unstable ash-laden plume. This has important implications for the emplacement of tephra deposits on the seabed. Numerical modelling has the potential to extend the results of laboratory experiments to larger scales and explore the conditions under which plumes may form and persist, but many existing models are computationally restricted by the fixed mesh approaches that they employ. In contrast, this paper presents a new multiphase flow model that uses an adaptive unstructured mesh approach. As a simulation progresses, the mesh is optimized to focus numerical resolution in areas important to the dynamics and decrease it where it is not needed, thereby potentially reducing computational requirements. Model verification is performed using the method of manufactured solutions, which shows the correct solution convergence rates. Model validation and application considers 2-D simulations of plume formation in a water tank which replicate published laboratory experiments. The numerically predicted settling velocities for both individual particles and plumes, as well as instability behaviour, agree well with experimental data and observations. Plume settling is clearly hindered by the presence of a salinity gradient, and its influence must therefore be taken into account when considering particles in bodies of saline water. Furthermore, individual particles settle in the laminar flow regime while plume settling is shown (by plume Reynolds numbers greater than unity) to be in the turbulent flow regime, which has a significant impact on entrainment and settling rates. Mesh adaptivity maintains solution accuracy while providing a substantial reduction in computational requirements when compared to the same simulation performed using a fixed mesh, highlighting the benefits of an

  14. Surface Topography Hinders Bacterial Surface Motility.

    Science.gov (United States)

    Chang, Yow-Ren; Weeks, Eric R; Ducker, William A

    2018-03-21

    We demonstrate that the surface motility of the bacterium, Pseudomonas aeruginosa, is hindered by a crystalline hemispherical topography with wavelength in the range of 2-8 μm. The motility was determined by the analysis of time-lapse microscopy images of cells in a flowing growth medium maintained at 37 °C. The net displacement of bacteria over 5 min is much lower on surfaces containing 2-8 μm hemispheres than on flat topography, but displacement on the 1 μm hemispheres is not lower. That is, there is a threshold between 1 and 2 μm for response to the topography. Cells on the 4 μm hemispheres were more likely to travel parallel to the local crystal axis than in other directions. Cells on the 8 μm topography were less likely to travel across the crowns of the hemispheres and were also more likely to make 30°-50° turns than on flat surfaces. These results show that surface topography can act as a significant barrier to surface motility and may therefore hinder surface exploration by bacteria. Because surface exploration can be a part of the process whereby bacteria form colonies and seek nutrients, these results help to elucidate the mechanism by which surface topography hinders biofilm formation.

  15. A consistent modelling methodology for secondary settling tanks: a reliable numerical method.

    Science.gov (United States)

    Bürger, Raimund; Diehl, Stefan; Farås, Sebastian; Nopens, Ingmar; Torfs, Elena

    2013-01-01

    The consistent modelling methodology for secondary settling tanks (SSTs) leads to a partial differential equation (PDE) of nonlinear convection-diffusion type as a one-dimensional model for the solids concentration as a function of depth and time. This PDE includes a flux that depends discontinuously on spatial position modelling hindered settling and bulk flows, a singular source term describing the feed mechanism, a degenerating term accounting for sediment compressibility, and a dispersion term for turbulence. In addition, the solution itself is discontinuous. A consistent, reliable and robust numerical method that properly handles these difficulties is presented. Many constitutive relations for hindered settling, compression and dispersion can be used within the model, allowing the user to switch on and off effects of interest depending on the modelling goal as well as investigate the suitability of certain constitutive expressions. Simulations show the effect of the dispersion term on effluent suspended solids and total sludge mass in the SST. The focus is on correct implementation whereas calibration and validation are not pursued.

  16. Investigating the settling dynamics of cohesive silt particles with particle-resolving simulations

    Science.gov (United States)

    Sun, Rui; Xiao, Heng; Sun, Honglei

    2018-01-01

    The settling of cohesive sediment is ubiquitous in aquatic environments, and the study of the settling process is important for both engineering and environmental reasons. In the settling process, the silt particles show behaviors that are different from non-cohesive particles due to the influence of inter-particle cohesive force. For instance, the flocs formed in the settling process of cohesive silt can loosen the packing, and thus the structural densities of cohesive silt beds are much smaller than that of non-cohesive sand beds. While there is a consensus that cohesive behaviors depend on the characteristics of sediment particles (e.g., Bond number, particle size distribution), little is known about the exact influence of these characteristics on the cohesive behaviors. In addition, since the cohesive behaviors of the silt are caused by the inter-particle cohesive forces, the motions of and the contacts among silt particles should be resolved to study these cohesive behaviors in the settling process. However, studies of the cohesive behaviors of silt particles in the settling process based on particle-resolving approach are still lacking. In the present work, three-dimensional settling process is investigated numerically by using CFD-DEM (Computational Fluid Dynamics-Discrete Element Method). The inter-particle collision force, the van der Waals force, and the fluid-particle interaction forces are considered. The numerical model is used to simulate the hindered settling process of silt based on the experimental setup in the literature. The results obtained in the simulations, including the structural densities of the beds, the characteristic lines, and the particle terminal velocity, are in good agreement with the experimental observations in the literature. To the authors' knowledge, this is the first time that the influences of non-dimensional Bond number and particle polydispersity on the structural densities of silt beds have been investigated separately

  17. Non-Markovianity hinders Quantum Darwinism

    Science.gov (United States)

    Galve, Fernando; Zambrini, Roberta; Maniscalco, Sabrina

    2016-01-01

    We investigate Quantum Darwinism and the emergence of a classical world from the quantum one in connection with the spectral properties of the environment. We use a microscopic model of quantum environment in which, by changing a simple system parameter, we can modify the information back flow from environment into the system, and therefore its non-Markovian character. We show that the presence of memory effects hinders the emergence of classical objective reality, linking these two apparently unrelated concepts via a unique dynamical feature related to decoherence factors.

  18. Competing jurisdictions : settling land claims in Africa

    NARCIS (Netherlands)

    Evers, S.; Spierenburg, M.; Wels, H.

    2005-01-01

    The papers included in this volume were earlier presented at a conference on the settlement of land claims in Africa, which was held in Amsterdam in September 2003. The papers are written primarily from an anthropological perspective. Contributions: Introduction: competing jurisdictions: settling

  19. Melting Can Hinder Impact-Induced Adhesion

    Science.gov (United States)

    Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A.; Schuh, Christopher A.

    2017-10-01

    Melting has long been used to join metallic materials, from welding to selective laser melting in additive manufacturing. In the same school of thought, localized melting has been generally perceived as an advantage, if not the main mechanism, for the adhesion of metallic microparticles to substrates during a supersonic impact. Here, we conduct the first in situ supersonic impact observations of individual metallic microparticles aimed at the explicit study of melting effects. Counterintuitively, we find that under at least some conditions melting is disadvantageous and hinders impact-induced adhesion. In the parameter space explored, i.e., ˜10 μ m particle size and ˜1 km /s particle velocity, we argue that the solidification time is much longer than the residence time of the particle on the substrate, so that resolidification cannot be a significant factor in adhesion.

  20. Segregation and differential settling in flocculated tailings

    Energy Technology Data Exchange (ETDEWEB)

    Farinato, R.S.; Mahmoudkhani, A.; Fenderson, T.; Watson, P. [Kemira, Atlanta, GA (United States)

    2010-07-01

    Untreated oil sands tailings have a high solids content, have poor dewaterability, and contain no aggregates. This PowerPoint presentation investigated segregation and differential settling in flocculated tailings. Tailings were treated with gypsum and various polymers. Cylinder settling, dynamic rheometry, particle size analysis, and microscopy techniques were used to characterize the composite tailings. The particles sizes of the samples were evaluated in relation to shear rate, bed depth, and treatment. The study showed that the gypsum-treated tailings had small aggregates, size stratification, a high solids content, and poor dewaterability. The polymer N-treated tailings had the lowest solids content, good dewaterability, and weak aggregates. The polymer A-treated tailings had a low solids content, very good dewaterability, and strong aggregates. The addition of a coagulant to the polymer-A treated tailings provided weaker aggregates and a higher solids content. tabs., figs.

  1. System and technique for ultrasonic characterization of settling suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Greenwood, Margaret S [Richland, WA; Panetta, Paul D [Richland, WA; Bamberger, Judith A [Richland, WA; Pappas, Richard A [Richland, WA

    2006-11-28

    A system for determining properties of settling suspensions includes a settling container, a mixer, and devices for ultrasonic interrogation transverse to the settling direction. A computer system controls operation of the mixer and the interrogation devices and records the response to the interrogating as a function of settling time, which is then used to determine suspension properties. Attenuation versus settling time for dilute suspensions, such as dilute wood pulp suspension, exhibits a peak at different settling times for suspensions having different properties, and the location of this peak is used as one mechanism for characterizing suspensions. Alternatively or in addition, a plurality of ultrasound receivers are arranged at different angles to a common transmitter to receive scattering responses at a variety of angles during particle settling. Angular differences in scattering as a function of settling time are also used to characterize the suspension.

  2. The Settling and Compaction of Nuclear Waste Slurries

    International Nuclear Information System (INIS)

    MACLEAN, G.T.

    1999-01-01

    The settling and compaction of simulated and real nuclear waste slurries were extensively studied. Experiments were carried out with simulated wastes at laboratory and large-scale sizes, and the results compared. A model of settling was derived and a method developed to correlate and scale-up settling data for different slurries and vessel sizes

  3. Overlearned responses hinder S-R binding.

    Science.gov (United States)

    Moeller, Birte; Frings, Christian

    2017-01-01

    Two mechanisms that are important for human action control are the integration of individual action plans (see Hommel, Müsseler, Aschersleben, & Prinz, 2001) and the automatization of overlearned actions to familiar stimuli (see Logan, 1988). In the present study, we analyzed the influence of automatization on action plan integration. Integration with pronunciation responses were compared for response incompatible word and nonword stimuli. Stimulus-response binding effects were observed for nonwords. In contrast, words that automatically triggered an overlearned pronunciation response were not integrated with pronunciation of a different word. That is, automatized response retrieval hindered binding effects regarding the retrieving stimulus and a new response. The results are a first indication of the way that binding and learning processes interact, and might also be a first step to understanding the more complex interdependency of the processes responsible for stimulus-response binding in action control and stimulus-response associations in learning research. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  4. Convection and crystal settling in sills

    Science.gov (United States)

    Gibb, Fergus G. F.; Henderson, C. Michael B.

    1992-02-01

    It has been advocated that convective and crystal settling processes play significant, and perhaps crucial, roles in magmatic differentiation. The fluid dynamics of magma chambers have been extensively studied in recent years, both theoretically and experimentally, but there is disagreement over the nature and scale of the convection, over its bearing on fractionation and possibly over whether it occurs at all. The differential distribution of modal olivine with height in differentiated alkaline basic sills provides critical evidence to resolve this controversy, at least for small to medium-large magma chambers. Our own and others' published data for such sills show that, irrespective of overall olivine content, modal olivine contents tend to increase in a roughly symmetrical manner inwards from the upper and lower margins of the sill, i.e. the distribution patterns are more often approximately D-shaped rather than the classic S-shape generally ascribed to gravity settling. We concur with the majority of other authors that this is an original feature of the filling process which has survived more or less unchanged since emplacement. We therefore conclude that the magmas have not undergone turbulent convection and that gravity settling has usually played only a minor modifying role since the intrusion of these sills. We offer a possible explanation for the apparent contradiction between fluid dynamical theory and the petrological evidence by suggesting that such sills rarely fill by the rapid injection of a single pulse of magma. Rather, they form from a series of pulses or a continuous pulsed influx over a protracted interval during which marginal cooling severely limits the potential for thermal convection.

  5. Tank 4 Characterization, Settling, And Washing Studies

    International Nuclear Information System (INIS)

    Bannochie, C.; Pareizs, J.; Click, D.; Zamecnik, J.

    2009-01-01

    A sample of PUREX sludge from Tank 4 was characterized, and subsequently combined with a Tank 51 sample (Tank 51-E1) received following Al dissolution, but prior to a supernate decant by the Tank Farm, to perform a settling and washing study to support Sludge Batch 6 preparation. The sludge source for the majority of the Tank 51-E1 sample is Tank 12 HM sludge. The Tank 51-E1 sample was decanted by SRNL prior to use in the settling and washing study. The Tank 4 sample was analyzed for chemical composition including noble metals. The characterization of the Tank 51-E1 sample, used here in combination with the Tank 4 sample, was reported previously. SRNL analyses on Tank 4 were requested by Liquid Waste Engineering (LWE) via Technical Task Request (TTR) HLE-TTR-2009-103. The sample preparation work is governed by Task Technical and Quality Assurance Plan (TTQAP), and analyses were controlled by an Analytical Study Plan and modifications received via customer communications. Additional scope included a request for a settling study of decanted Tank 51-E1 and a blend of decanted Tank 51-E1 and Tank 4, as well as a washing study to look into the fate of undissolved sulfur observed during the Tank 4 characterization. The chemistry of the Tank 4 sample was modeled with OLI Systems, Inc. StreamAnalyzer to determine the likelihood that sulfate could exist in this sample as insoluble Burkeite (2Na 2 SO 4 · Na 2 CO 3 ). The OLI model was also used to predict the composition of the blended tank materials for the washing study. The following conclusions were drawn from the Tank 4 analytical results reported here: (1) Any projected blend of Tank 4 and the current Tank 51 contents will produce a SB6 composition that is lower in Ca and U than the current SB5 composition being processed by DWPF. (2) Unwashed Tank 4 has a relatively large initial S concentration of 3.68 wt% on a total solids basis, and approximately 10% of the total S is present as an insoluble or undissolved form

  6. A Method for Measuring Sludge Settling Characteristics in Turbulent Flows

    DEFF Research Database (Denmark)

    Rasmussen, Michael R.; Larsen, Torben

    1996-01-01

    A method for the determination of the settlilng velocity for sludge as a funktion of turbulence intensity and sludge concentration has been developed. The principle of the method is to continuously feed the top of a settling column with sludge so that a steady state and uniform concentration...... distribution occurs in the middle of the column. This eliminates time scale effects such as flocculation from the measurements, as the resulting settling velocity only can be found at steady state and uniform conditions. The method assumes that flocculated sludge settles faster than disintegratedsludge to make...... a mass balance involving concentration at the top and the middle of the column as well as the inlet sludge flow. The resulting mass balance is used to calculate a lokal settling velocity. The turbulence is introduced by an oscillating grid in the whole depth of the settling column. Settling velocities...

  7. A Combined Raindrop Aggregate Destruction Test-Settling Tube (RADT-ST Approach to Identify the Settling Velocity of Sediment

    Directory of Open Access Journals (Sweden)

    Liangang Xiao

    2015-10-01

    Full Text Available The use of sediment settling velocity based on mineral grain size distribution in erosion models ignores the effects of aggregation on settling velocity. The alternative approach, wet-sieved aggregate size distribution, on the other hand, cannot represent all destructive processes that eroded soils may experience under impacting raindrops. Therefore, without considering raindrop impact, both methods may lead to biased predictions of the redistribution of sediment and associated substances across landscapes. Rainfall simulation is an effective way to simulate natural raindrop impact under controlled laboratory conditions. However, very few methods have been developed to integrate rainfall simulation with the settling velocity of eroded sediment. This study aims to develop a new proxy, based on rainfall simulation, in order to identify the actual settling velocity distribution of aggregated sediment. A combined Raindrop Aggregate Destruction Test-Settling Tube (RADT-ST approach was developed to (1 simulate aggregate destruction under a series of simulated rainfalls; and (2 measure the actual settling velocity distribution of destroyed aggregates. Mean Weight Settling Velocity (MWSV of aggregates was used to investigate settling behaviors of different soils as rainfall kinetic energy increased. The results show the settling velocity of silt-rich raindrop impacted aggregates is likely to be underestimated by at least six times if based on mineral grain size distribution. The RADT-ST designed in this study effectively captures the effects of aggregation on settling behavior. The settling velocity distribution should be regarded as an evolving, rather than steady state parameter during erosion events. The combined RADT-ST approach is able to generate the quasi-natural sediment under controlled simulated rainfall conditions and is adequately sensitive to measure actual settling velocities of differently aggregated soils. This combined approach provides

  8. Prehistoric human settling on the Tibetan Plateau

    Science.gov (United States)

    Chen, F.; Zhang, D.; Dong, G.; Xia, H.

    2017-12-01

    When and where did human first settle down on the Tibetan Plateau is under hot debate among archaeologist, anthropologists, geneticist and paleo-geographers. Based on systematic archaeological, chronological and archaeo-botanical studies of 53 sites in Northeastern Tibetan Plateau, we propose that agriculture facilitated human permanent settlement on the Tibetan Plateau initially since 5200 years ago below 2500 masl and since 3600 years ago up to around 4000 masl, possibly assisted by domesticated animals (Chen et al. 2015). By redating the age of hand- and footprints in Chusang site in Tibet, Meyer et al. (2017) argue that hunter-gatherers permanently occupied central Tibetan Plateau in early Holocene (before 7.4 ka) without the help of agriculture. Except for the possible problem of dating, however, the limited hand- and footprints could only indicate the presence of prehistoric hunter-gatherers on the remote central Tibetan Plateau in the early Holocene, unable to support the permanent inhabitation assertion (Zhang et al., 2017). To better understand how human spread to, settle on and adapt to the Tibetan Plateau, we are closely working together with anthropologists, archaeologists and geneticists to do system Paleolithic surveys, full excavations, and genetic analysis of ancient and modern human, animals and plants. Our preliminary study show that human migrated to the Tibetan Plateau from the last Deglacial period to late Holocene mainly from North China via Yellow River valley and its tributary valleys in the Northeastern Tibetan Plateau (NETP). This migration is constituted of four stages (Upper Paleolithic, Epi-Paleolithic, Neolithic and Bronze Age) with different adaptation strategies, including microlithic technology, millet and barley farming, and sheep herding and so on (Zhang et al., 2016). In addition, our new finds in Tibet indicate that there are probably more migration routes from southeast and southwest Tibetan Plateau in the late Pleistocene or

  9. Mixing and settling in continuous metal production

    International Nuclear Information System (INIS)

    Richter, H.J.; Laaspere, J.T.; Fitzpatrick, J.M.

    1993-01-01

    Modern metallurgical processes produce metal from ore in a single converter operated in horizontal mode to permit staging of bath and oxygen potential by utilizing bottom-blowing of oxygen and fuel. The submerged injectors must create sufficient turbulence to provide excellent gas-liquid contact in order to maximize heat and mass transfer in the bath, but this turbulence must be selectively localized so as to provide adequate phase separation zones of metal and slag between the active turbulent zones. It is important to know the behavior of gas and liquids in the bubble plume, the nature and paths of liquids and entrainment into the plume, and separation phenomena including travel and behavior in the settling zones. Such knowledge is of fundamental value in designing reactors for continuous direct metal making. In this work the mixing caused by submerged injection of gas into a bath simulating a converter and subsequent phase separation of two immiscible liquids representing slag and metal respectively, are being studied experimentally and analytically. First results of experiments and of the numerical analysis are presented

  10. The Yukon settlement settled little enough

    Energy Technology Data Exchange (ETDEWEB)

    Sillars, L.

    1997-01-27

    Northern Cross, a small Alberta oil company has discovered the first promising petroleum prospect in the Yukon Territories in three decades. However, the company is unable to proceed with construction and production because the aboriginal community of Old Crow alleged that the project endangers the famous Porcupine Caribou Herd, has international implications, and infringes on traditional Gwitchin Indian territory. The wells in question were originally drilled in the 1960s, but abandoned due to lack of infrastructure, and ongoing negotiations with native groups. In 1993 the federal government indicated that land claim issues were settled. Northern Cross was the first company in to resume work on the wells, since the Dempster Highway, built in the meantime, makes getting the oil out a much more feasible proposition. The delay in approving Northern Cross`s application revolves around the dispute about the location of the wells,i.e. are they situated on tribal land or on Crown Land. The Department of Indian and Northern Affairs is investigating the rival claims, and promises to have a ruling within 12 months.

  11. Gravity settling of precipitated magnetite and ferric floc

    International Nuclear Information System (INIS)

    Holt, N.S.; Loft, P.R.

    1983-06-01

    A comparison is presented of the gravity settling performance of ferric floc and magnetite, both in batch settling tests, and on a continuous gravity settler. The precipitation of magnetite from solution on a continuous basis was also demonstrated, and the process was shown not to be significantly affected by the presence of a wide range of chemical species. (U.K.)

  12. Dateline USA: Settling the West, 1800-1900.

    Science.gov (United States)

    Chatton, Barbara; O'Laughlin, Michael

    1998-01-01

    Presents an annotated bibliography of titles related to the theme "Settling the West" which are appropriate for primary, elementary, and middle grades. Topics include overviews of Western history; early 19th century; the gold rush; the pony express; travelers by trail, rail, and ship; settling the West; cowboys and cattle; and the…

  13. Occurrence and distribution of heavy metals in indoor settled ...

    African Journals Online (AJOL)

    The results showed widespread heavy metals contamination especially Fe and Zn, which were present as the highest concentration while Cd was the lowest in the settled particles (dust). The order of occurrence of heavy metals in settled particles (dust) collected indoor in 2007 and 2008 respectively were as follows, ...

  14. Flocculation and Settling Velocity Estimates for Reservoir Sedimentation Analysis

    Science.gov (United States)

    2016-02-01

    viscosity ). Stokes’ law is commonly used to describe settling velocity of a single particle and is applicable when the particle Reynolds number (Rep...fluid viscosity , and ν is kinematic viscosity . Several researchers recognize that large, fast-settling particles disobey the laminar boundary...interparticle attraction caused by electrostatic and physiochemical forces. These properties give clays their stickiness and control essential

  15. Purification of drilling fluids by vibration-settling tanks

    Energy Technology Data Exchange (ETDEWEB)

    Bulatov, A.I.; Prokopov, L.I.; Proselkov, Yu.M.; Reznichenko, I.N.; Skvortsov, D.S.; Volkov, A.P.

    1982-01-01

    Results are presented of studies done by the authors of a prototype of a new tool for cleaning a drilling fluid, a vibration settling tank. It is indicated that the vibration settling tank has many advantages over the most advanced vibration screens VS-1. This makes it possible to recommend development and broad industrial testing of this apparatus.

  16. Coral larvae settle at a higher frequency on red surfaces

    Science.gov (United States)

    Mason, B.; Beard, M.; Miller, M. W.

    2011-09-01

    Although chemical cues serve as the primary determinants of larval settlement and metamorphosis, light is also known to influence the behavior and the settlement of coral planulae. For example, Porites astreoides planulae settle preferentially on unconditioned red substrata. In order to test whether this behavior was a response to color and whether other species also demonstrate color preference, settlement choice experiments were conducted with P. astreoides and Acropora palmata. In these experiments, larvae were offered various types of plastic substrata representing three to seven different color choices. Both species consistently settled on red (or red and orange) substrata at a higher frequency than other colors. In one experiment, P. astreoides settled on 100% of red, plastic cable ties but failed to settle on green or white substrata. In a second experiment, 24% of larvae settled on red buttons, more than settled on six other colors combined. A. palmata settled on 80% of red and of orange cables ties but failed to settle on blue in one experiment and settled on a greater proportion of red acrylic squares than on four other colors or limestone controls in a second experiment. The consistency of the response across a variety of plastic materials suggests the response is related to long-wavelength photosensitivity. Fluorescence and reflectance spectra of experimental substrata demonstrated that the preferred substrata had spectra dominated by wavelengths greater than 550 nm with little or no reflection or emission of shorter wavelengths. These results suggest that some species of coral larvae may use spectral cues for fine-scale habitat selection during settlement. This behavior may be an adaptation to promote settlement in crustose coralline algae (CCA)-dominated habitats facilitating juvenile survival.

  17. Settling rates of plutonium-bearing particles in Pond B

    International Nuclear Information System (INIS)

    Orlandini, K.A.; Bowling, J.W.; Pinder, J.E. III

    1986-01-01

    Research is being conducted in Pond B to determine the relative importances of (1) changes in particles settling rates, (2) changes in remobilization rates, and (3) the influence of the macrophytes on the annual cycle in /sup 239,240/Pu inventories. The initial research has emphasized (1) an evaluation of the importance of particle adherence to macrophytes in reducing Pu inventories in the water column and (2) measurements of particle settling rates at different times of the year. This report describes the research on measurements of particle settling rates. 3 figures, 1 table

  18. A phenomenological retention tank model using settling velocity distributions.

    Science.gov (United States)

    Maruejouls, T; Vanrolleghem, P A; Pelletier, G; Lessard, P

    2012-12-15

    Many authors have observed the influence of the settling velocity distribution on the sedimentation process in retention tanks. However, the pollutants' behaviour in such tanks is not well characterized, especially with respect to their settling velocity distribution. This paper presents a phenomenological modelling study dealing with the way by which the settling velocity distribution of particles in combined sewage changes between entering and leaving an off-line retention tank. The work starts from a previously published model (Lessard and Beck, 1991) which is first implemented in a wastewater management modelling software, to be then tested with full-scale field data for the first time. Next, its performance is improved by integrating the particle settling velocity distribution and adding a description of the resuspension due to pumping for emptying the tank. Finally, the potential of the improved model is demonstrated by comparing the results for one more rain event. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Factors influencing suspended solids concentrations in activated sludge settling tanks.

    Science.gov (United States)

    Kim, Y; Pipes, W O

    1999-05-31

    A significant fraction of the total mass of sludge in an activated sludge process may be in the settling tanks if the sludge has a high sludge volume index (SVI) or when a hydraulic overload occurs during a rainstorm. Under those conditions, an accurate estimate of the amount of sludge in the settling tanks is needed in order to calculate the mean cell residence time or to determine the capacity of the settling tanks to store sludge. Determination of the amount of sludge in the settling tanks requires estimation of the average concentration of suspended solids in the layer of sludge (XSB) in the bottom of the settling tanks. A widely used reference recommends averaging the concentrations of suspended solids in the mixed liquor (X) and in the underflow (Xu) from the settling tanks (XSB=0. 5{X+Xu}). This method does not take into consideration other pertinent information available to an operator. This is a report of a field study which had the objective of developing a more accurate method for estimation of the XSB in the bottom of the settling tanks. By correlation analysis, it was found that only 44% of the variation in the measured XSB is related to sum of X and Xu. XSB is also influenced by the SVI, the zone settling velocity at X and the overflow and underflow rates of the settling tanks. The method of averaging X and Xu tends to overestimate the XSB. A new empirical estimation technique for XSB was developed. The estimation technique uses dimensionless ratios; i.e., the ratio of XSB to Xu, the ratio of the overflow rate to the sum of the underflow rate and the initial settling velocity of the mixed liquor and sludge compaction expressed as a ratio (dimensionless SVI). The empirical model is compared with the method of averaging X and Xu for the entire range of sludge depths in the settling tanks and for SVI values between 100 and 300 ml/g. Since the empirical model uses dimensionless ratios, the regression parameters are also dimensionless and the model can be

  20. Determination of Settling Tanks Performance Using an Eulerian- Lagrangian Method

    OpenAIRE

    A Tamayol; B Firoozabadi; G Ahmadi

    2008-01-01

    Circulation regions always exist in settling tanks. These regions reduce the tank’s performance and decrease its effective volume. The recirculation zones would result in short-circuiting and high flow mixing problems. The inlet position would also affect the size and location of the recirculation region. Using a proper baffle configuration could substantially increase the performance of the settling tanks. A common procedure for the comparison of the performances of diffe...

  1. Gravity settling of Hanford single-shell tank sludges

    International Nuclear Information System (INIS)

    Brooks, K.P.; Rector, D.R.; Smith, P.A.

    1999-01-01

    The US Department of Energy plans to use gravity settling in million-gallon storage tanks while pretreating sludge on the Hanford site. To be considered viable in these large tanks, the supernatant must become clear, and the sludge must be concentrated in an acceptable time. These separations must occur over the wide range of conditions associated with sludge pretreatment. In the work reported here, gravity settling was studied with liter quantities of actual single-shell tank sludge from hanford Tank 241-C-107. Because of limited sludge availability, an approach was developed using the results of these liter-scale tests to predict full-scale operation. Samples were centrifuged at various g-forces to simulate compaction with higher layers of sludge. A semi-empirical settling model was then developed incorporating both the liter-scale settling data and the centrifuge compression results to describe the sludge behavior in a million-gallon tank. The settling model predicted that the compacted sludge solids would exceed 20 wt% in less than 30 days of settling in a 10-m-tall tank for all pretreatment steps

  2. Facilitating or hindering social cohesion? The impact of the ...

    African Journals Online (AJOL)

    However, we show in this article that that the impact of the CWP is not always positive and that the CWP may in some cases result in tensions and contradictions that hinder social cohesion and even cause violence. If not implemented in a consultative participatory manner, the CWP may be a source of conflict rather than of ...

  3. Challenges hindering female participation in politics as expressed ...

    African Journals Online (AJOL)

    The study challenges hindering female participation in politics as expressed by female politicians in the federal capital territory, Abuja, Nigeria. The research design adopted for this study was descriptive survey. The respondents were 210 female politicians selected from six Area Councils of the FCT using a proportionate ...

  4. Hydraulic evolution of high-density turbidity currents from the Brushy Canyon Formation, Eddy County, New Mexico inferred by comparison to settling and sorting experiments

    Science.gov (United States)

    Motanated, Kannipa; Tice, Michael M.

    2016-05-01

    Hydraulic transformations in turbidity currents are commonly driven by or reflected in changes in suspended sediment concentrations, but changes preceding transformations can be difficult to diagnose because they do not produce qualitative changes in resultant deposits. This study integrates particle settling experiments and in situ detection of hydraulically contrasting particles in turbidites in order to infer changes in suspended sediment concentration during deposition of massive (Bouma Ta) sandstone divisions. Because grains of contrasting density are differentially sorted during hindered settling from dense suspensions, relative grading patterns can be used to estimate suspended sediment concentrations and interpret hydraulic evolution of the depositing turbidity currents. Differential settling of dense particles (aluminum ballotini) through suspensions of hydraulically coarser light particles (silica ballotini) with volumetric concentration, Cv, were studied in a thin vessel by using particle-image-velocimetry. At high Cv, aluminum particles were less retarded than co-sedimenting silica particles, and effectively settled as hydraulically coarser grains. This was because particles were entrained into clusters dominated by the settling behavior of the silica particles. Terminal settling velocities of both particles converged at Cv ≥ 25%, and particle sorting was diminished. The results of settling experiments were applied to understand settling of analogous feldspar and zircon grains in natural turbidity flows. Distributions of light and heavy mineral grains in massive sandstones, Bouma Ta divisions, of turbidites from the Middle Permian Brushy Canyon Formation were observed in situ by X-ray fluorescence microscopy (μXRF). Hydraulic sorting of these grains resulted in characteristic patterns of zirconium abundance that decreased from base to top within Ta divisions. These profiles resulted from upward fining of zircon grains with respect to co

  5. Multiphase modeling of settling and suspension in anaerobic digester

    International Nuclear Information System (INIS)

    Yu, Liang; Ma, Jingwei; Frear, Craig; Zhao, Quanbao; Dillon, Robert; Li, Xiujin; Chen, Shulin

    2013-01-01

    Highlights: • Develop biowaste fluid dynamics for collision, aggregation and breakup of clusters. • Explore the mechanisms of settling and suspension in anaerobic digester. • Biowaste particles tended to have fluid properties. • Aided with CFD simulation, the scale-up effect was reduced. - Abstract: Effective suspension and settling are critical for controlling biomass retention in a bioreactor. In this paper, a multi-fluid model with kinetic theory of granular flow (KTGF) was established to describe these phenomena in the biowaste particles flow in anaerobic digesters. Solid retention time (SRT) was added as a parameter into anaerobic digestion No.1 (ADM1) model to evaluate its effect on the biogas productivity. The model was experimentally validated in a liquid–gas–solid column reactor with gas and solid volume fraction and granular temperature as the major variables. The wastewater residence time distribution was also determined through modeling and measurement to evaluate the mixing pattern in the pilot column reactor. The effect of restitution coefficient on flow behavior of biowaste particles, particles settling and suspension were predicted. Settling and suspension processes of anaerobic digesters were simulated for lab and pilot-scale reactors with comparisons made for reactor configuration and geometry model, respectively. This study demonstrated that the multi-fluid model with KTGF could provide better understanding of impact of suspension and settling upon retaining biomass particles in the anaerobic digesters

  6. Characterization of the variability of settling in wastewater treatment

    International Nuclear Information System (INIS)

    Cherif, Hayet; Touhami, Youssef; Shayeb, Hedi

    2009-01-01

    The processes of biological treatment of wastewater in activated sludge are complex dynamic processes are difficult to manage. The ability of the sludge settling is a key parameter for the overall effectiveness of pollution control process and for preserving the quality of the receiving environment. So for better management of wastewater treatment plants, a study of interactions between the couple reactor clarifier is necessary. A new management technique must notify the operator to problems related to sludge mainly to the loss of the sludge blanket which will have adverse effects on the environment. The approach is widely adopted and applied an approach aims to identify factors that may explain the observed phenomena in order to draw strategies that could improve the sludge settling on an industrial scale. The widely used approach is based on measuring Mohlman index and gives an impression, on the ability of the mud settling, but does not prevent the operator to anomalies that have places in the decanter.

  7. Settling-velocity specific SOC distribution on hillslopes

    DEFF Research Database (Denmark)

    Hu, Yaxian; Berhe, Asmeret Asefaw; Fogel, Marilyn L.

    The net effect of soil erosion by water, as a sink or source of atmospheric CO2, is determined by the spatial (re-)distribution and stability of eroded soil organic carbon (SOC). The depositional position of eroded SOC is a function of the transport distances of soil fractions where the SOC...... fractions. Eroding sandy soils and sediment were sampled after a series of rainfall events along a slope on a freshly seeded cropland in Jutland, Denmark. All the soil samples were fractionated into five settling classes using a settling tube apparatus. The spatial distribution of soil settling classes...... shows a coarsening effect immediately below the eroding slope, followed by a fining trend at the slope tail. The 13C values of soil fractions were more positive at the footslope than on the slope shoulder or at the slope tail, suggesting enhanced decomposition rate of fresh SOC input at the footslope...

  8. Hindered bacterial mobility in porous media flow enhances dispersion

    Science.gov (United States)

    Dehkharghani, Amin; Waisbord, Nicolas; Dunkel, Jörn; Guasto, Jeffrey

    2017-11-01

    Swimming bacteria live in porous environments characterized by dynamic fluid flows, where they play a crucial role in processes ranging from the bioremediation to the spread of infections. We study bacterial transport in a quasi-two-dimensional porous microfluidic device, which is complemented by Langevin simulations. The cell trajectories reveal filamentous patterns of high cell concentration, which result from the accumulation of bacteria in the high-shear regions of the flow and their subsequent advection. Moreover, the effective diffusion coefficient of the motile bacteria is severely hindered in the transverse direction to the flow due to decorrelation of the cells' persistent random walk by shear-induced rotation. The hindered lateral diffusion has the surprising consequence of strongly enhancing the longitudinal bacterial transport through a dispersion effect. These results demonstrate the significant role of the flow and geometry in bacterial transport through porous media with potential implications for understanding ecosystem dynamics and engineering bioreactors. NSF CBET-1511340, NSF CAREER-1554095.

  9. Synthesis and Properties of New Polymer Having Hindered Phenol Antioxidants

    International Nuclear Information System (INIS)

    Kim, Taek Hyeon; Song, Yi Rang; Kim, Jae Nyoung

    2003-01-01

    Polymeric antioxidants was successfully prepared by the copolymerization of monomeric maleimide with MMA. The copolymers possess some stabilizing effect against thermal oxidation with oven aging in air at 120 .deg. C for 5 days and also have the some resistance to water extraction. It is well known that the addition of antioxidants is the most convenient and effective way to block the thermal oxidation of polyolefins. Hindered phenol antioxidants, which contain the 2,6-di-tert-butylphenol functional group, are very effective primary antioxidants. However, low molecular weight (MW) antioxidants are easily lost from the polymers by the physical loss such as migration, evaporation, and extraction by liquid. The effectiveness of low MW antioxidants is limited. Therefore a new trend for antioxidant development is to prepare antioxidant with higher MW. The copolymerization or homopolymerization of the functional monomer bearing hindered phenol antioxidants is a conventional method for preparing polymeric antioxidants

  10. Relative importance of secondary settling tank models in WWTP simulations

    DEFF Research Database (Denmark)

    Ramin, Elham; Flores-Alsina, Xavier; Sin, Gürkan

    2012-01-01

    Results obtained in a study using the Benchmark Simulation Model No. 1 (BSM1) show that a one-dimensional secondary settling tank (1-D SST) model structure and its parameters are among the most significant sources of uncertainty in wastewater treatment plant (WWTP) simulations [Ramin et al., 2011......]. The sensitivity results consistently indicate that the prediction of sludge production is most sensitive to the variation of the settling parameters. In the present study, we use the Benchmark Simulation Model No. 2 (BSM2), a plant-wide benchmark, that combines the Activated Sludge Model No. 1 (ASM1...

  11. Teamwork in a coronary care unit: facilitating and hindering aspects

    Directory of Open Access Journals (Sweden)

    Bethania Ferreira Goulart

    2016-06-01

    Full Text Available Abstract OBJECTIVE To identify, within a multidisciplinary team, the facilitating and hindering aspects for teamwork in a coronary care unit. METHOD A descriptive study, with qualitative and quantitative data, was carried out in the coronary care unit of a public hospital. The study population consisted of professionals working in the unit for at least one year. Those who were on leave or who were not located were excluded. The critical incident technique was used for data collection, by means of semi-structured interviews. For data analysis, content analysis and the critical incident technique were applied. RESULTS Participants were 45 professionals: 29 nursing professionals; 11 physicians; 4 physical therapists; and 1 psychologist. A total of 49 situations (77.6% with negative references; 385 behaviors (54.2% with positive references; and 182 consequences emerged (71.9% with negative references. Positive references facilitate teamwork, whereas negative references hinder it. A collaborative/communicative interprofessional relationship was evidenced as a facilitator; whereas poor collaboration among agents/inadequate management was a hindering aspect. CONCLUSION Despite the prevalence of negative situations and consequences, the emphasis on positive behaviors reveals the efforts the agents make in order to overcome obstacles and carry out teamwork.

  12. Factors Motivating and Hindering Information and Communication Technologies Action Competence

    Directory of Open Access Journals (Sweden)

    Adile Aşkım Kurt

    2013-01-01

    Full Text Available Information and Communication Technologies Action Competence (ICTAC can be defined as “individuals’ motivation and capacity to voluntarily employ their ICT skills for initiating or taking part in civic actions”. Since academic staff and teachers in ICT related fields have crucial roles in training action-competent individuals, this study aimed to determine the views of preservice teachers and instructors in Computer Education and Instructional Technology (CEIT departments about the motivating and hindering factors regarding ICTAC. Researchers used purposeful sampling technique and identified seven instructors and 16 students attending outlier CEIT departments from four different Turkish state universities. Since there is no contemporary framework on factors motivating or hindering ICTAC, the study was conducted with a qualitative approach and the data were collected through semi-structured interviews. Factors motivating and hindering ICTAC were identified through a content analysis. Findings of the study are believed to guide ICT and ICT education professionals in training students with higher levels of ICTAC and guide the course developers to focus on relevant social responsibility issues

  13. SVOC partitioning between the gas phase and settled dust indoors

    DEFF Research Database (Denmark)

    Weschler, Charles J.; Nazaroff, W. W.

    2010-01-01

    Semivolatile organic compounds (SVOCs) are a major class of indoor pollutants. Understanding SVOC partitioning between the gas phase and settled dust is important for characterizing the fate of these species indoors and the pathways by which humans are exposed to them. Such knowledge also helps...

  14. SVOC partitioning between the gas phase and settled dust indoors

    Science.gov (United States)

    Weschler, Charles J.; Nazaroff, William W.

    2010-09-01

    Semivolatile organic compounds (SVOCs) are a major class of indoor pollutants. Understanding SVOC partitioning between the gas phase and settled dust is important for characterizing the fate of these species indoors and the pathways by which humans are exposed to them. Such knowledge also helps in crafting measurement programs for epidemiological studies designed to probe potential associations between exposure to these compounds and adverse health effects. In this paper, we analyze published data from nineteen studies that cumulatively report measurements of dustborne and airborne SVOCs in more than a thousand buildings, mostly residences, in seven countries. In aggregate, measured median data are reported in these studies for 66 different SVOCs whose octanol-air partition coefficients ( Koa) span more than five orders of magnitude. We use these data to test a simple equilibrium model for estimating the partitioning of an SVOC between the gas phase and settled dust indoors. The results demonstrate, in central tendency, that a compound's octanol-air partition coefficient is a strong predictor of its abundance in settled dust relative to its gas phase concentration. Using median measured results for each SVOC in each study, dustborne mass fractions predicted using Koa and gas-phase concentrations correlate reasonably well with measured dustborne mass fractions ( R2 = 0.76). Combined with theoretical understanding of SVOC partitioning kinetics, the empirical evidence also suggests that for SVOCs with high Koa values, the mass fraction in settled dust may not have sufficient time to equilibrate with the gas phase concentration.

  15. Geochemistry of suspended and settling solids in two freshwater lakes.

    NARCIS (Netherlands)

    Koelmans, A.A.

    1998-01-01

    This study describes the 1987–1992 time variationof the bulk chemical composition, levels of heavymetals, arsenic, nitrogen and phosporous insuspended and settling solids in Lake Volkerak andLake Zoom (The Netherlands). Suspended and setlingsolids were collected with continuous flowcentrifuges and

  16. Modelling and test of aeration tank settling (ATS)

    DEFF Research Database (Denmark)

    Nielsen, M. K.; Bechmann, H.; Henze, Mogens

    2000-01-01

    The use of aeration tank settling during high hydraulic loads on large wastewater treatment plants has previously been demonstrated as a reliable technique and proven valuable. The paper proposes a simplified deterministic model to predict the efficiency of the method. It is shown...

  17. 37 CFR 10.67 - Settling similar claims of clients.

    Science.gov (United States)

    2010-07-01

    ... clients. 10.67 Section 10.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE... Office Code of Professional Responsibility § 10.67 Settling similar claims of clients. A practitioner who represents two or more clients shall not make or participate in the making of an aggregate settlement of the...

  18. Settling of a cylindrical particle in a stagnant fluid

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Rosendahl, Lasse; Yin, Chungen

    The objective of this work is to collect data and develop models for cylindrical particles which could be used in numerical multiphase flow modeling. Trajectories of cylindrical particles settling in stagnant water are filmed from two directions in order to derive detailed information on their mo...

  19. A layered model for inclined pipe flow of settling slurry

    Czech Academy of Sciences Publication Activity Database

    Matoušek, Václav; Krupička, Jan; Kesely, Mikoláš

    2018-01-01

    Roč. 333, June (2018), s. 317-326 ISSN 0032-5910 R&D Projects: GA ČR GA17-14271S Institutional support: RVO:67985874 Keywords : inclined pipe * settling slurry * pressure drop * flow stratification * laboratory loop Impact factor: 2.942, year: 2016

  20. Study of settling of peat on channel banks

    Energy Technology Data Exchange (ETDEWEB)

    Amaryan, L S; Bazin, Ye T; Stepanichev, V G

    1983-01-01

    Results are presented of studies of settling of the peat formation of the upper type on banks of drying channels. A technique is presented for forecasting evaluation in the decrease in depth of the channels because of packing of the peat on the sides of the dryers.

  1. Aggregate Settling Velocities in San Francisco Estuary Margins

    Science.gov (United States)

    Allen, R. M.; Stacey, M. T.; Variano, E. A.

    2015-12-01

    One way that humans impact aquatic ecosystems is by adding nutrients and contaminants, which can propagate up the food web and cause blooms and die-offs, respectively. Often, these chemicals are attached to fine sediments, and thus where sediments go, so do these anthropogenic influences. Vertical motion of sediments is important for sinking and burial, and also for indirect effects on horizontal transport. The dynamics of sinking sediment (often in aggregates) are complex, thus we need field data to test and validate existing models. San Francisco Bay is well studied and is often used as a test case for new measurement and model techniques (Barnard et al. 2013). Settling velocities for aggregates vary between 4*10-5 to 1.6*10-2 m/s along the estuary backbone (Manning and Schoellhamer 2013). Model results from South San Francisco Bay shoals suggest two populations of settling particles, one fast (ws of 9 to 5.8*10-4 m/s) and one slow (ws of Brand et al. 2015). While the open waters of San Francisco Bay and other estuaries are well studied and modeled, sediment and contaminants often originate from the margin regions, and the margins remain poorly characterized. We conducted a 24 hour field experiment in a channel slough of South San Francisco Bay, and measured settling velocity, turbulence and flow, and suspended sediment concentration. At this margin location, we found average settling velocities of 4-5*10-5 m/s, and saw settling velocities decrease with decreasing suspended sediment concentration. These results are consistent with, though at the low end of, those seen along the estuary center, and they suggest that the two population model that has been successful along the shoals may also apply in the margins.

  2. Urban search mobile platform modeling in hindered access conditions

    Science.gov (United States)

    Barankova, I. I.; Mikhailova, U. V.; Kalugina, O. B.; Barankov, V. V.

    2018-05-01

    The article explores the control system simulation and the design of the experimental model of the rescue robot mobile platform. The functional interface, a structural functional diagram of the mobile platform control unit, and a functional control scheme for the mobile platform of secure robot were modeled. The task of design a mobile platform for urban searching in hindered access conditions is realized through the use of a mechanical basis with a chassis and crawler drive, a warning device, human heat sensors and a microcontroller based on Arduino platforms.

  3. Photovoltaic System Regulation Based on a PID Fuzzy Controller to Ensure a Fixed Settling Time

    Directory of Open Access Journals (Sweden)

    Paula A. Ortiz-Valencia

    2013-11-01

    Full Text Available The main objective of the controllers in photovoltaic systems (PV is to ensure the maximum extraction of the available power. Those controllers usually combine the action of a maximum power point tracking algorithm (MPPT with a voltage regulator, which has the function of rejecting disturbances at the panel terminals. Such controllers are commonly based on PI and PID structures, it requiring linearized models at an operating point. But, due to disturbances generated by the environment and the load, the operating point of the system changes drastically, which hinder to obtain the desired system performance. This paper proposes to regulate the PV system using a Fuzzy PID controller, which adapts to changes in solar irradiance and load oscillations. This characteristic guarantees a constant settling time, which is required to precisely define the period of the MPPT algorithm. In the case of classical linear controllers, the period of the MPPT algorithm is set to the worst case (longest period which generates additional power losses by slowing down the tracking of the optimal operating point. Therefore, the solution proposed in this paper improves the overall system efficiency. Finally, such a solution is validated through simulations in Matlab®.

  4. Factors Hindering the Integration of CALL in a Tertiary Institution

    Directory of Open Access Journals (Sweden)

    Izaham Shah Ismail

    2008-12-01

    Full Text Available The field of Computer Assisted Language Learning (CALL is a field that is constantly evolving as it is very much dependent on the advancement of computer technologies. With new technologies being invented almost every day, experts in the field are looking for ways to apply these new technologies in the language classroom. Despite that, teachers are said to be slow at adopting technology in their classrooms and language teachers, whether at schools or tertiary institutions, are no exception. This study attempts to investigate the factors that hinder ESL instructors at an institution of higher learning from integrating CALL in their lessons. Interviews were conducted with five ESL instructors and results revealed that factors which hinder them from integrating CALL in their teaching are universal factors such as knowledge in technology and pedagogy, computer facilities and resources, absence of exemplary integration of CALL, personal beliefs on language teaching, views on the role of a computers as teacher, and evaluation of learning outcomes.

  5. Factors controlling floc settling velocity along a longitudinal estuarine transect

    Science.gov (United States)

    Manning, A.J.; Schoellhamer, D.H.

    2013-01-01

    A 147 km longitudinal transect of flocculated cohesive sediment properties in San Francisco Bay (SFB) was conducted on June 17th, 2008. Our aim was to determine the factors that control floc settling velocity along the longitudinal axis of the estuary. The INSSEV-LF video system was used to measure floc diameters and settling velocities at 30 stations at a distance of 0.7 m above the estuary bed. Floc sizes (D) ranged from 22 μm to 639 μm and settling velocities (Ws) ranged between 0.04 mm·s− 1 and 15.8 mm·s− 1 during the longitudinal transect. Nearbed turbulent shear stresses throughout the transect duration were within the 0.2–0.5 Pa range which typically stimulates flocculation growth. The individual D–Ws–floc density plots suggest the suspended sediments encountered throughout SFB were composed of both muddy cohesive sediment and mixed sediments flocs. Mass-weighted population mean settling velocity (Wsmass) ranged from 0.5 mm·s− 1 to 10 mm·s− 1. The macrofloc and microfloc (demarcation at 160 μm) sub-populations demonstrated parameterised settling velocities which spanned nearly double the range of the sample mean settling velocities (Wsmean). The macroflocs tended to dominate the suspended mass (up to 77% of the ambient suspended solid concentration; SSC) from San Pablo Bay to Carquinez Strait (the vicinity of the turbidity maximum zone). Microfloc mass was particularly significant (typically 60–100% of the SSC) in the northern section of South Bay and most of Central Bay. The transect took eleven hours to complete and was not fully synoptic. During slack tide, larger and faster settling flocs deposited, accounting for most of the longitudinal variability. The best single predictor of settling velocity was water velocity 39 min prior to sampling, not suspended-sediment concentration or salinity. Resuspension and settling lags are likely responsible for the lagged response of settling velocity to water velocity. The distribution of

  6. Numerical simulation of particle settling and cohesion in liquid

    Energy Technology Data Exchange (ETDEWEB)

    Johno, Y; Nakashima, K; Shigematsu, T; Ono, B [SASEBO National College of Technology, 1-1 Okishin, Sasebo, Nagasaki, 857-1193 (Japan); Satomi, M, E-mail: yjohno@post.cc.sasebo.ac.j [Sony Semiconductor Kyushu Corporation, Kikuchigun, Kumamoto (Japan)

    2009-02-01

    In this study, the motions of particles and particle clusters in liquid were numerically simulated. The particles of two sizes (Dp=40mum and 20mum) settle while repeating cohesion and dispersion, and finally the sediment of particles are formed at the bottom of a hexahedron container which is filled up with pure water. The flow field was solved with the Navier-Stokes equations and the particle motions were solved with the Lagrangian-type motion equations, where the interaction between fluid and particles due to drag forces were taken into account. The collision among particles was calculated using Distinct Element Method (DEM), and the effects of cohesive forces by van der Waals force acting on particle contact points were taken into account. Numerical simulations were performed under conditions in still flow and in shear flow. It was found that the simulation results enable us to know the state of the particle settling and the particle condensation.

  7. Stochastic growth of cloud droplets by collisions during settling

    Science.gov (United States)

    Madival, Deepak G.

    2018-04-01

    In the last stage of droplet growth in clouds which leads to drizzle formation, larger droplets begin to settle under gravity and collide and coalesce with smaller droplets in their path. In this article, we shall deal with the simplified problem of a large drop settling amidst a population of identical smaller droplets. We present an expression for the probability that a given large drop suffers a given number of collisions, for a general statistically homogeneous distribution of droplets. We hope that our approach will serve as a valuable tool in dealing with droplet distribution in real clouds, which has been found to deviate from the idealized Poisson distribution due to mechanisms such as inertial clustering.

  8. Coating degradation at tank bottomdue to settled water

    International Nuclear Information System (INIS)

    Majeed, U.; Rizvi, M.A.; Khan, I.H.

    2008-01-01

    In the present work, coating degradation as a result of settled water on fuel storage tank bottoms has been reported with the help of electrochemical impedance spectroscopy (EIS), blister analysis and gravimetric analysis (water uptake). Blistering occurs underneath the coating at the tank bottom due to direct contact with settled water. Degradation behavior of polyamide epoxy coatings on mild steel has been reported in term of coating resistance at the start of the experiments, after 96 hours and at the end of EIS experiments. Coating degradation in terms of shift in phase angle (theta) at high frequency as a function of exposure time has also been reported. The blister formation and gravimetric analysis data has also been reported in support of EIS result. (author)

  9. Geodesic Monitoring of Settling in Vertical Fuel Tanks

    Directory of Open Access Journals (Sweden)

    Luis Enrique Acosta-González

    2017-07-01

    Full Text Available The behavior of the settling in a vertical tank used for fuel storage was studied. Monitoring was conducted using the geodesic model for the geometric leveling of high accuracy category II. The original project varied during construction by replacing deep foundations with a surface one applying compaction techniques to improve soil resistance. The deformation values obtained provided valuable information on the implementation of the proposed foundation alternative depending on time and loads. The maximum settling was reported to be 132,6 mm. The displacements in the control points located in the perimeter of the tank had a distinct nature with a maximum of 44,2 mm, which caused the foundation structure to crack.

  10. Mobilization and mixing of settled solids in horizontal storage tanks

    International Nuclear Information System (INIS)

    Cummins, R.L.

    1995-01-01

    Studies were conducted using submerged jets for the mobilization and mixing of settled solids to form a suspension that can easily be removed from storage tanks. These studies focus on the specific problems relating to horizontal, cylindrical storage tanks. Of primary consideration are the storage tanks located at the Oak Ridge National Laboratory which are used for the collection of remote-handled, radioactive liquid wastes. These wastes are in two phases. A layer of undissolved, settled solids varying from 2 to 4 feet in depth under a layer of supernate. Using a surrogate of the tank contents and an approximate 2/3 dimensional scale tank, tests were performed to determine the optimum design and location of suction and discharge nozzles as well as the minimum discharge velocity required to achieve complete mobilization of the solids in the tank

  11. Grey-box modelling of aeration tank settling.

    Science.gov (United States)

    Bechman, Henrik; Nielsen, Marinus K; Poulsen, Niels Kjølstad; Madsen, Henrik

    2002-04-01

    A model of the concentrations of suspended solids (SS) in the aeration tanks and in the effluent from these during Aeration tank settling (ATS) operation is established. The model is based on simple SS mass balances, a model of the sludge settling and a simple model of how the SS concentration in the effluent from the aeration tanks depends on the actual concentrations in the tanks and the sludge blanket depth. The model is formulated in continuous time by means of stochastic differential equations with discrete-time observations. The parameters of the model are estimated using a maximum likelihood method from data from an alternating BioDenipho waste water treatment plant (WWTP). The model is an important tool for analyzing ATS operation and for selecting the appropriate control actions during ATS, as the model can be used to predict the SS amounts in the aeration tanks as well as in the effluent from the aeration tanks.

  12. Effect of Ionic Strength on Settling of Activated Sludge

    OpenAIRE

    M Ahmadi Moghadam, M Soheili, MM Esfahani

    2005-01-01

    Structural properties of activated sludge flocs were found to be sensitive to small changes in ionic strength. This study investigates the effect of ionic strength on settling of activated sludge. Samples were taken from activated sludge process of Ghazvin Sasan soft drink wastewater treatment plant, then treated with different ionic strengths of KCl and CaCl2 solution, after that the turbidity of supernatant was measured. The results indicated that low ionic strength resulted in a steeper sl...

  13. Directions for improving the design of horizontal settling tanks

    Energy Technology Data Exchange (ETDEWEB)

    Basev, V A; Vaseva, V N

    1979-01-01

    Basic trends are presented for improving the design of horizontal settling tanks in recent years in order to increase hydraulic load on them and their efficient operation. An analysis is made of the suggested different designs of feed and uptake water-distributors, systems of concentrated recovery of clarified water and fine-layer elements. The most advanced of them was selected. The latter was recommended for practical use or experimental verification during purification of mine waters from suspended substances.

  14. Polymer aids for settling and filtration of oil sands tailings

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering; Energy Resources Conservation Board, Calgary, AB (Canada). Oil Sands Section; Xu, Z.; Masliyah, J.H. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering

    2008-07-01

    Oil sand tailings are segregated into coarse and fine tailings. High volumes of toxic fluids and tailings are created in the process. Tailings ponds are an environmental risk with high operating and maintenance costs. Current commercial technologies uses chemical additions to create recycled water and composite tailings (CT). Researchers are now investigating centrifuged and dry mature fine tailings (MFT). Filtration processes with flocculants are used to separate the tailings into warm recycle water and dried cakes that can be used in reclamation processes. Studies are being conducted to find a polymer than can effectively flocculate and filter whole oil sands tailings. The filtration procedure uses pressure to produce released water. Polymers include magnafloc and Al-PAM polymer concentrations are used in slurry masses. Tests have been conducted to determine the settling rates of the polymers. The tests showed that Al-PAM filtered the tailings effectively. Paraffinic froth treatment tests have also been conducted to determine settling rates. A cake produced with froth treatment tailings of Al-PAM 400 ppm had a water content 42.5 wt per cent. The tests showed that while Magnafloc 1011 is a good settling aid, but a poor filtration addition. Al-PAM aided in both the flocculation and filtration processes. Higher Al-PAM dosages are needed for froth treatment tailings processes. It was concluded that dry cakes are produced with the addition of Al-PAM. tabs., figs.

  15. Grain-resolving simulations of settling cohesive sediment

    Science.gov (United States)

    Vowinckel, Bernhard; Whithers, Jade; Meiburg, Eckart; Luzzatto-Fegiz, Paolo

    2017-11-01

    Cohesive sediment is ubiquitous in natural environments such as rivers, lakes and coastal ecosystems. For this type of sediment, we can no longer ignore the short-range attractive forces that result in flocculation of aggregates much larger than the individual grain size. Hence, understanding the complex dynamics of the interplay between flocculated sediment and the ambient fluid is of prime interest for managing aquatic environments, although a comprehensive understanding of these phenomena is still lacking. In the present study, we address this issue by carrying out grain-resolved simulations of cohesive particles settling under gravity using the Immersed Boundary Method. We present a computational model formulation to accurately resolve the process of flocculation. The cohesive model is then applied to a complex test case. A randomly distributed ensemble of 1261 polydisperse particles is released in a tank of quiescent fluid. Subsequently, particles start to settle, thereby replacing fluid at the bottom of the tank, which induces a counter flow opposing the settling direction. This mechanism will be compared to experimental studies from the literature, as well as to the non-cohesive counterpart to assessthe impact of flocculation on sedimentation.

  16. Social prejudice hindering proper use of car safety seats.

    Science.gov (United States)

    Kanburoglu, Mehmet Kenan; Cizmeci, Mehmet Nevzat; Akelma, Ahmet Zulfikar; Orun, Emel; Yesilyurt, Kubra; Tatli, Mustafa Mansur

    2013-12-01

    The compliance of parents with child passenger safety (CPS) has been mainly explained by their level of knowledge. Social, ethnic and cultural factors have not been investigated in detail. This study investigated the rate of compliance of parents with CPS guidelines, as well as the factors hindering it. Parents of infants aged 2-10 days were enrolled. The proportions of families obtaining a car safety seat (CSS; 57%) and complying with CPS recommendations (2%) were very low. Most of the parents thought CSS were harmful for infants (mother, 57%; father, 63%), despite having already purchased one. Parents believed their children to be too small to use CSS and cannot sit in CSS because they should lie flat on their backs at all times. These prejudices may be due to the social and cultural circumstances specific to Turkey, or corresponding findings may be found in countries with similar socioeconomic status. © 2013 The Authors. Pediatrics International © 2013 Japan Pediatric Society.

  17. Dynamic modeling of sludge compaction and consolidation processes in wastewater secondary settling tanks

    NARCIS (Netherlands)

    Abusam, A.; Keesman, K.J.

    2009-01-01

    The double exponential settling model is the widely accepted model for wastewater secondary settling tanks. However, this model does not estimate accurately solids concentrations in the settler underflow stream, mainly because sludge compression and consolidation processes are not considered. In

  18. Endangered river fish: factors hindering conservation and restoration

    Science.gov (United States)

    Cooke, Steven J.; Paukert, Craig P.; Hogan, Zeb

    2012-01-01

    Globally, riverine fish face many anthropogenic threats including riparian and flood plain habitat degradation, altered hydrology, migration barriers, fisheries exploitation, environmental (climate) change, and introduction of invasive species. Collectively, these threats have made riverine fishes some of the most threatened taxa on the planet. Although much effort has been devoted to identifying the threats faced by river fish, there has been less effort devoted to identifying the factors that may hinder our ability to conserve and restore river fish populations and their watersheds. Therefore, we focus our efforts on identifying and discussing 10 general factors (can also be viewed as research and implementation needs) that constrain or hinder effective conservation action for endangered river fish: (1) limited basic natural history information; (2) limited appreciation for the scale/extent of migrations and the level of connectivity needed to sustain populations; (3) limited understanding of fish/river-flow relationships; (4) limited understanding of the seasonal aspects of river fish biology, particularly during winter and/or wet seasons; (5) challenges in predicting the response of river fish and river ecosystems to both environmental change and various restoration or management actions; (6) limited understanding of the ecosystem services provided by river fish; (7) the inherent difficulty in studying river fish; (8) limited understanding of the human dimension of river fish conservation and management; (9) limitations of single species approaches that often fail to address the broader-scale problems; and (10) limited effectiveness of governance structures that address endangered river fish populations and rivers that cross multiple jurisdictions. We suggest that these issues may need to be addressed to help protect, restore, or conserve river fish globally, particularly those that are endangered.

  19. Sludge Settling Rate Observations and Projections at the Savannah River Site - 13238

    Energy Technology Data Exchange (ETDEWEB)

    Gillam, Jeffrey M.; Shah, Hasmukh B.; Keefer, Mark T. [Savannah River Remediation LLC, Aiken SC 29808 (United States)

    2013-07-01

    Since 2004, sludge batches have included a high percentage of stored sludge generated from the H- modified (HM) process. The slow-settling nature of HM sludge means that the settling is often the major part of the washing tank quiescent period between required pump runs to maintain flammability control. Reasonable settling projections are needed to wash soluble salts from sludge in an efficient manner, to determine how much sludge can be washed in a batch within flammability limits, and to provide composition projections for batch qualification work done in parallel with field preparation. Challenges to providing reasonably accurate settling projections include (1) large variations in settling behavior from tank-to-tank, (2) accounting for changing initial concentrations, sludge masses, and combinations of different sludge types, (3) changing the settling behavior upon dissolving some sludge compounds, and (4) sludge preparation schedules that do not allow for much data collection for a particular sludge before washing begins. Scaling from laboratory settling tests has provided inconsistent results. Several techniques have been employed to improve settling projections and therefore the overall batch preparation efficiency. Before any observations can be made on a particular sludge mixture, projections can only be made based on historical experience with similar sludge types. However, scaling techniques can be applied to historical settling models to account for different sludge masses, concentrations, and even combinations of types of sludge. After sludge washing/settling cycles begin, the direct measurement of the sludge height, once generally limited to a single turbidity meter measurement per settle period, is now augmented by examining the temperature profile in the settling tank, to help determine the settled sludge height over time. Recently, a settling model examined at PNNL [1,2,3] has been applied to observed thermocouple and turbidity meter readings to

  20. The impact of the adult blue mussel (Mytilus edulis) population on settling of conspecific larvae

    DEFF Research Database (Denmark)

    Dolmer, Per; Stenalt, Ea

    2010-01-01

    The choice of a mussel bed as a settling locality by conspecific mussel larvae is a trade-off between reduced fitness due to an increased risk of larval predation and post-settling food competition with the filtering adults and the benefit from a reduced post-settling mortality. This reduced post...

  1. 16 CFR 1209.4 - Test procedures for determining settled density.

    Science.gov (United States)

    2010-01-01

    ... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

  2. Settling for less out of fear of being single.

    Science.gov (United States)

    Spielmann, Stephanie S; MacDonald, Geoff; Maxwell, Jessica A; Joel, Samantha; Peragine, Diana; Muise, Amy; Impett, Emily A

    2013-12-01

    The present research demonstrates that fear of being single predicts settling for less in romantic relationships, even accounting for constructs typically examined in relationship research such as anxious attachment. Study 1 explored the content of people's thoughts about being single. Studies 2A and 2B involved the development and validation of the Fear of Being Single Scale. Study 2C provided preliminary support for the hypothesis that fear of being single predicts settling for less in ongoing relationships, as evidenced by greater dependence in unsatisfying relationships. Study 3 replicated this effect in a longitudinal study demonstrating that fear of being single predicts lower likelihood of initiating the dissolution of a less satisfying relationship. Studies 4A and 4B explored the predictive ability of fear of being single for self-reported dating standards. Across both samples, fear of being single was unrelated to self-reported standards for a mate, with the exception of consistently higher standards for parenting. Studies 5 and 6 explored romantic interest in targets that were manipulated to vary in responsiveness and physical attractiveness. These studies found that fear of being single consistently predicted romantic interest in less responsive and less attractive dating targets. Study 7 explored fear of being single during a speed-dating event. We found that fear of being single predicted being less selective in expressing romantic interest but did not predict other daters' romantic interest. Taken together, the present research suggests that fear of being single is a meaningful predictor of settling for less in relationships. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  3. Decontamination technology of contaminated water with flocculating and settling technology

    International Nuclear Information System (INIS)

    Aritomi, Masanori; Adachi, Toshihiro; Watanabe, Noriyuki; Hosobuchi, Shigeki

    2012-01-01

    In the joint research and development of treatment systems of cooling water for cutting asphalt pavement surface with our authors' group, the liquid-solid separation technology by flocculating and settling technology, and the flocculants for the use of systems were developed. In this paper, the developed flocculating and settling technology and the flocculants are discussed first. Next, the demonstration tests of decontamination technology on the contaminated water in swimming pools in an elementary school located at Motomiya City, Fukushima Prefecture had been conducted by use of the stationary purification system of contaminated water and the flocculants compounding with or without iron ferrocianide developed by the preliminary test. It was clarified from the results that ionized cesium (Cs) rarely exists in the stagnant water in pools, ponds, lakes and so on at the time when nine months have passed since Fukushima Dai-ichi nuclear power plant accidents. Further, it is necessary to use the flocculants compounding iron ferrocianide in the case where ionized Cs exists in water. From the above-mentioned results, the following problems were pointed out: One problem was cyanide dissolution in the purified water and the other one was the dissolution from the dehydration sludge. Finally, the high-performance mobile purification units of contaminated water which is capable for carrying with trucks have been developed, and the demonstration test was performed in Minami-soma City, Fukushima Prefecture to purify the contaminated water in a pond and generated by the high-pressure water washing in a Public Hall. From the test results, it was made clear that the dehydration sludge separated by liquid-solid settling of the contaminated water of around 1,000Bq/l became a high radiation dose of about 185,000Bq/l. (author)

  4. DUST TRANSPORT IN PROTOSTELLAR DISKS THROUGH TURBULENCE AND SETTLING

    International Nuclear Information System (INIS)

    Turner, N. J.; Carballido, A.; Sano, T.

    2010-01-01

    We apply ionization balance and magnetohydrodynamical (MHD) calculations to investigate whether magnetic activity moderated by recombination on dust grains can account for the mass accretion rates and the mid-infrared spectra and variability of protostellar disks. The MHD calculations use the stratified shearing-box approach and include grain settling and the feedback from the changing dust abundance on the resistivity of the gas. The two-decade spread in accretion rates among solar-mass T Tauri stars is too large to result solely from variations in the grain size and stellar X-ray luminosity, but can plausibly be produced by varying these parameters together with the disk magnetic flux. The diverse shapes and strengths of the mid-infrared silicate bands can come from the coupling of grain settling to the distribution of the magnetorotational turbulence, through the following three effects. First, recombination on grains 1 μm or smaller yields a magnetically inactive dead zone extending more than two scale heights from the midplane, while turbulent motions in the magnetically active disk atmosphere overshoot the dead zone boundary by only about one scale height. Second, grains deep in the dead zone oscillate vertically in wave motions driven by the turbulent layer above, but on average settle at the rates found in laminar flow, so that the interior of the dead zone is a particle sink and the disk atmosphere will become dust-depleted unless resupplied from elsewhere. Third, with sufficient depletion, the dead zone is thinner and mixing dredges grains off the midplane. The last of these processes enables evolutionary signatures such as the degree of settling to sometimes decrease with age. The MHD results also show that the magnetic activity intermittently lifts clouds of small grains into the atmosphere. Consequently the photosphere height changes by up to one-third over timescales of a few orbits, while the extinction along lines of sight grazing the disk surface

  5. Mobility and settling rate of agglomerates of polydisperse nanoparticles

    Science.gov (United States)

    Spyrogianni, Anastasia; Karadima, Katerina S.; Goudeli, Eirini; Mavrantzas, Vlasis G.; Pratsinis, Sotiris E.

    2018-02-01

    Agglomerate settling impacts nanotoxicology and nanomedicine as well as the stability of engineered nanofluids. Here, the mobility of nanostructured fractal-like SiO2 agglomerates in water is investigated and their settling rate in infinitely dilute suspensions is calculated by a Brownian dynamics algorithm tracking the agglomerate translational and rotational motion. The corresponding friction matrices are obtained using the HYDRO++ algorithm [J. G. de la Torre, G. del Rio Echenique, and A. Ortega, J. Phys. Chem. B 111, 955 (2007)] from the Kirkwood-Riseman theory accounting for hydrodynamic interactions of primary particles (PPs) through the Rotne-Prager-Yamakawa tensor, properly modified for polydisperse PPs. Agglomerates are generated by an event-driven method and have constant mass fractal dimension but varying PP size distribution, mass, and relative shape anisotropy. The calculated diffusion coefficient from HYDRO++ is used to obtain the agglomerate mobility diameter dm and is compared with that from scaling laws for fractal-like agglomerates. The ratio dm/dg of the mobility diameter to the gyration diameter of the agglomerate decreases with increasing relative shape anisotropy. For constant dm and mean dp, the agglomerate settling rate, us, increases with increasing PP geometric standard deviation σp,g (polydispersity). A linear relationship between us and agglomerate mass to dm ratio, m/dm, is revealed and attributed to the fast Brownian rotation of such small and light nanoparticle agglomerates. An analytical expression for the us of agglomerates consisting of polydisperse PPs is then derived, us=(1/-{ρf/ρp})g 3 π μ m/dm (ρf is the density of the fluid, ρp is the density of PPs, μ is the viscosity of the fluid, and g is the acceleration of gravity), valid for agglomerates for which the characteristic rotational time is considerably shorter than their settling time. Our calculations demonstrate that the commonly made assumption of monodisperse PPs

  6. Mobility and settling rate of agglomerates of polydisperse nanoparticles.

    Science.gov (United States)

    Spyrogianni, Anastasia; Karadima, Katerina S; Goudeli, Eirini; Mavrantzas, Vlasis G; Pratsinis, Sotiris E

    2018-02-14

    Agglomerate settling impacts nanotoxicology and nanomedicine as well as the stability of engineered nanofluids. Here, the mobility of nanostructured fractal-like SiO 2 agglomerates in water is investigated and their settling rate in infinitely dilute suspensions is calculated by a Brownian dynamics algorithm tracking the agglomerate translational and rotational motion. The corresponding friction matrices are obtained using the HYDRO++ algorithm [J. G. de la Torre, G. del Rio Echenique, and A. Ortega, J. Phys. Chem. B 111, 955 (2007)] from the Kirkwood-Riseman theory accounting for hydrodynamic interactions of primary particles (PPs) through the Rotne-Prager-Yamakawa tensor, properly modified for polydisperse PPs. Agglomerates are generated by an event-driven method and have constant mass fractal dimension but varying PP size distribution, mass, and relative shape anisotropy. The calculated diffusion coefficient from HYDRO++ is used to obtain the agglomerate mobility diameter d m and is compared with that from scaling laws for fractal-like agglomerates. The ratio d m /d g of the mobility diameter to the gyration diameter of the agglomerate decreases with increasing relative shape anisotropy. For constant d m and mean d p , the agglomerate settling rate, u s , increases with increasing PP geometric standard deviation σ p,g (polydispersity). A linear relationship between u s and agglomerate mass to d m ratio, m/d m , is revealed and attributed to the fast Brownian rotation of such small and light nanoparticle agglomerates. An analytical expression for the u s of agglomerates consisting of polydisperse PPs is then derived, u s =1-ρ f ρ p g3πμmd m (ρ f is the density of the fluid, ρ p is the density of PPs, μ is the viscosity of the fluid, and g is the acceleration of gravity), valid for agglomerates for which the characteristic rotational time is considerably shorter than their settling time. Our calculations demonstrate that the commonly made assumption of

  7. An experimental study of low concentration sludge settling velocity under turbulent condition.

    Science.gov (United States)

    Guo, Lisha; Zhang, Daijun; Xu, Danyu; Chen, Yuan

    2009-05-01

    Particle Image Velocimetry (PIV) was used to study the settling of activated sludge flocs under turbulent flow conditions. Experimental results showed that a larger particle diameter led to a higher settling velocity while the higher turbulence intensity led to lower settling velocity. Based on the measurements a mathematical relation has been derived which correlates the settling velocity for individual sludge flocs under turbulent conditions through a modified Vesilind equation. Settling velocity shows a power-type relation to sludge particle diameter and an exponential-type relation with turbulence intensity and sludge concentration.

  8. Does Teaching Grammar Really Hinder Students' Speaking Abilities?

    Institute of Scientific and Technical Information of China (English)

    Kazumi Araki

    2015-01-01

    In the history of formal English education in Japan, grammar used to be the mainstream. In the secondary education system, teachers used to spend many hours teaching grammar to the students. However, it has been replaced by the aural/oral method of teaching a foreign language. There was even a remark that teaching grammar hinders students from communicating fluently. Literally, there was a time when grammar was set aside in formal English education. However, the author noticed that in grammar classes, the students speak English more loudly and confidently without much hesitation than in other types of English classes. One of the reasons is that they are not worried about the contents of the speeches. They are simply concentrating on the forms. They are not afraid of making major mistakes, and the errors they make are minor so they do not feel embarrassed in public. The atmosphere of the grammar classes is very positive and the students enjoy speaking English. In this paper, the author shows how grammar classes can contribute to the acquisition of the students' speaking abilities and manners. "Learning grammar was a precious experience", one student reported after the course.

  9. Is Urban Planning in Australia Hindered by Poor Metropolitan Governance?

    Directory of Open Access Journals (Sweden)

    Paul Burton

    2017-11-01

    Full Text Available There are many calls for urban planning in Australia to be reformed, although often in contradictory ways. For example, some argue it should be capable of delivering greater certainty to developers while others call for more flexibility in processes of urban development regulation; some would like to roll back its regulatory impact while others argue for a renewal of planning’s commitment to promoting social and spatial justice. The Australian planning system is also held to be hindered by a comparative lack of planning at and for the metropolitan scale. This is connected to the absence of well-developed structures of metropolitan governance in what is a three-tier federal system, with most power over planning concentrated at the State and Territory government scale. The paper explores this putative hindrance by considering three important issues in Australian urban policy debates about the efficacy of contemporary multi-level governance arrangements: spatial scale; identity and legitimacy; and efficiency and effectiveness. It includes some analysis of the case made for a more explicit and rigorous national urban policy and how this might relate to lower level planning regimes. The paper focuses on recent urban policy and planning initiatives in South East Queensland, one of Australia’s fastest growing metropolitan regions, and concludes that while incremental but nonetheless significant improvements in planning policy and practice are possible, these are unlikely to satisfy those calling for more radical changes to improve the Australian planning system.

  10. Settling of virgin olive oil from horizontal screw solid bowl in static conditions.

    Science.gov (United States)

    Gila, Abraham M; Bejaoui, Mohamed A; Beltrán, Gabriel; Jiménez, Antonio

    2017-08-01

    This work was aimed to study the clarification efficiency of natural decantation in settling tank on virgin olive oil obtained from a two-ways continuous process. For this purpose, the impurities content of the virgin olive oil were monitored during settling process in settling tank at two different depths. Efficiency of purging system was determined for two days. The experiments were performed at industrial scale during three crop years. During the first minutes of settling was observed an ascent of the smaller organic particles of the oil. Then, most of the virgin olive oil impurities were settled at 300 min, independently of the initial content of virgin olive oil. Finally, oil decantation showed slower rate. Higher clarification values were obtained for those decanter oils with higher impurities content, achieving clarification percentages between of 62.69 and 95.91% at 48 h of settling. The highest settling efficiency was observed for those decanter oils with initial higher impurities content. The purging system used in the settling tanks was not able to remove the most of settled impurities since a considerable amount of the impurities remained in the tank after 48 h, between 13.6 and 71.41% for the studied oils. In the tank purges was observed important oil losses. Therefore, decantation was not an efficient system for oil clarification since its settling capacity varied depending on the initial impurities content and due to the settled impurities can not be removed fully by purging system.

  11. Improving Settling Dynamics of Activated Sludge by Adding Fine Talc Powder

    DEFF Research Database (Denmark)

    Rasmussen, Michael R.; Larsen, Torben; Clauss, F.

    1996-01-01

    The effect of adding varying mixtures of talc and chlorite powder to activated sludge in order to improve the settling characteristic has been studied. The powder is found to improve the settling velocity of the sludge, strictly by increasing the average density of the sludge floc aggregate. The ....... The settling velocity was measured with a recirculated settling column under different concentrations and turbulence levels. Numerical simulation of a secondary settling tank indicates that adding fine powder will improve the overall performance considerably.......The effect of adding varying mixtures of talc and chlorite powder to activated sludge in order to improve the settling characteristic has been studied. The powder is found to improve the settling velocity of the sludge, strictly by increasing the average density of the sludge floc aggregate...

  12. Heavy metal concentration of settled surface dust in residential building

    International Nuclear Information System (INIS)

    Nor Aimi abdul Wahab; Fairus Muhamad Darus; Norain Isa; Siti Mariam Sumari; Nur Fatihah Muhamad Hanafi

    2012-01-01

    The concentrations of heavy metals (Cu, Ni, Pb and Zn) in settled surface dust were collected from nine residential buildings in different areas in Seberang Prai Tengah District, Pulau Pinang. The samples of settled surface dust were collected in 1 m 2 area by using a polyethylene brush and placed in the dust pan by sweeping the living room floor most accessible to the occupants. Heavy metals concentrations were determined by using inductively coupled plasma optical emission spectrometer (ICP-OES) after digestion with nitric acid and sulphuric acid. The results show that the range of heavy metals observed in residential buildings at Seberang Prai Tengah were in the range of 2.20-14.00 mg/ kg, 1.50-32.70 mg/ kg, 1.50-76.80 mg/ kg and 14.60-54.40 mg/ kg for Cu, Ni, Pb and Zn respectively. The heavy metal concentration in the investigated areas followed the order: Pb > Zn > Ni > Cu. Statistical analysis indicates significant correlation between all the possible pairs of heavy metal. The results suggest a likely common source for the heavy metal contamination, which could be traced most probably to vehicular emissions, street dust and other related activities. (author)

  13. Characterizing the effects of cell settling on bioprinter output

    International Nuclear Information System (INIS)

    Pepper, Matthew E; Burg, Timothy C; Burg, Karen J L; Groff, Richard E; Seshadri, Vidya

    2012-01-01

    The time variation in bioprinter output, i.e. the number of cells per printed drop, was studied over the length of a typical printing experiment. This variation impacts the cell population size of bioprinted samples, which should ideally be consistent. The variation in output was specifically studied in the context of cell settling. The bioprinter studied is based on the thermal inkjet HP26A cartridge; however, the results are relevant to other cell delivery systems that draw fluid from a reservoir. A simple mathematical model suggests that the cell concentration in the bottom of the reservoir should increase linearly over time, up to some maximum, and that the cell output should be proportional to this concentration. Two studies were performed in which D1 murine stem cells and similarly sized polystyrene latex beads were printed. The bead output profiles were consistent with the model. The cell output profiles initially followed the increasing trend predicted by the settling model, but after several minutes the cell output peaked and then decreased. The decrease in cell output was found to be associated with the number of use cycles the cartridge had experienced. The differing results for beads and cells suggest that a biological process, such as adhesion, causes the decrease in cell output. Further work will be required to identify the exact process. (communication)

  14. Analysis of suspended solids transport processes in primary settling tanks.

    Science.gov (United States)

    Patziger, Miklós; Kiss, Katalin

    2015-01-01

    The paper shows the results of a long-term research comprising FLUENT-based numerical modeling, in situ measurements and laboratory tests to analyze suspended solids (SS) transport processes in primary settling tanks (PSTs). The investigated PST was one of the rectangular horizontal flow PSTs at a large municipal wastewater treatment plant (WWTP) of a capacity of 500,000 population equivalent. Many middle-sized and large WWTPs are equipped with such PSTs. The numerical PST model was calibrated and validated based on the results of comprehensive in situ flow and SS concentration measurements from low (5 m/h) up to quite high surface overflow rates of 9.5 and 13.0 m/h and on settling and other laboratory tests. The calibrated and validated PST model was also successfully used for evaluation of some slight modifications of the inlet geometry (removing lamellas, installing a flocculation 'box', shifting the inlet into a 'bottom-near' or into a 'high' position), which largely affect PST behavior and performance. The investigations provided detailed insight into the flow and SS transport processes within the investigated PST, which strongly contributes to hydrodynamically driven design and upgrading of PSTs.

  15. Mixing-settling apparatus for liquid-liquid extraction

    International Nuclear Information System (INIS)

    Skolokin, L.I.; Leif, V.E.; Sednev, J.M.

    1989-01-01

    A mixing-settling apparatus for liquid-liquid extraction comprises a casing. A first partition is mounted along its longitudinal axis and above an overflow device. The mixing device is connected to a means of feeding at least one of the phases and is shaped as at least one hollow element mounted essentially perpendicularly to the longitudinal axis of the casing. The walls of the hollow element are provided with openings, the outlet cross-sections of which are directed to the first partition. The first partition is provided with a means for regulating the height of the layer of the mixed phases M in the mixing zone, said means being located in the partition at the point most distant from the means for feeding phases L, S in the longitudinal direction. A second transporting device is mounted in the settling zone. It is fixed on to the casing and is located after the overflow device in the direction of movement of the light phase l. (author) 10 figs

  16. Metal-Free Approaches to Sterically-Hindered Bonds

    Science.gov (United States)

    Dunham, Veronica Vin-yi

    Developing methods to perform cross coupling reactions by means of catalysis is highly desirable in chemistry. Many industries in today's society, such as the petroleum, agriculture, pharmaceutical, electronics, and polymer industry, use catalysis to some extent whether it is to make molecules that offer crop protection or toward the synthesis of the active ingredient of a medication. It is noteworthy that over 90% of chemicals are made through catalytic processes and that the catalyst market reached $17 billion in 2014, which demonstrates the demand for such methods. While transition metal catalysts have advantages such as low catalyst loading, broad reactivity, and that they have been well studied, some disadvantages are that they can be relatively expensive and sometimes air sensitive which can make them challenging to use. Organocatalysis, specifically noncovalent catalysis operating through hydrogen bond donating interactions, offers an environmentally-friendly alternative to transition metal catalysis. Our lab utilizes organocatalysis as a strategy to synthesize challenging, sterically-hindered bonds. Nitrimines have been identified as powerful coupling partners for the sustainable construction of new sterically congested carbon-carbon and carbon-heteroatom bonds. Using urea catalysis, a metal-free method to synthesize previously inaccessible enamines has been developed. Conventional routes to synthesize enamines as important building blocks toward target molecules generally require Lewis/Bronsted acids or expensive transition metals; however, these methods are often unsuccessful when stericallyhindered substrates are used. To address this synthetic challenge, it was hypothesized that hydrogen bonding interactions between a urea organocatalyst and nitrimine would generate a reactive species suited for the effective carbon-nitrogen coupling with amines to give the desired enamine products. This reaction provides high yields (up to 99%) of enamines using a

  17. SNARE zippering is hindered by polyphenols in the neuron

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yoosoo [Department of Genetic Engineering and Center for Human Interface Nanotechnology, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Biomedical Research Institute, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Kim, Se-Hyun; Heo, Paul; Kong, Byoungjae; Shin, Jonghyeok; Jung, Young-Hun; Yoon, Keejung; Chung, Woo-Jae [Department of Genetic Engineering and Center for Human Interface Nanotechnology, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Shin, Yeon-Kyun [Biomedical Research Institute, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Department of Biochemistry, Biophysics, and Molecular Biology, Iowa State University, Ames, IA 50011 (United States); Kweon, Dae-Hyuk, E-mail: dhkweon@skku.edu [Department of Genetic Engineering and Center for Human Interface Nanotechnology, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of)

    2014-07-18

    Highlights: • Membrane fusion driven by SNARE complex is hindered by several polyphenols. • Distinctive inhibitory effect of each polyphenol on SNARE zippering in neuron was examined. • FRET between fluorescence protein-tagged SNAREs probed well SNARE zippering in PC12 cells. • Delphinidin and cyanidin inhibit N-terminal SNARE nucleation in Ca{sup 2+}-independent manner. • Myricetin inhibits Ca{sup 2+}-dependent transmembrane association of SNARE complex. - Abstract: Fusion of synaptic vesicles with the presynaptic plasma membrane in the neuron is mediated by soluble N-ethylmaleimide-sensitive fusion protein-attachment protein receptor (SNARE) proteins. SNARE complex formation is a zippering-like process which initiates at the N-terminus and proceeds to the C-terminal membrane-proximal region. Previously, we showed that this zippering-like process is regulated by several polyphenols, leading to the arrest of membrane fusion and the inhibition of neuroexocytosis. In vitro studies using purified SNARE proteins reconstituted in liposomes revealed that each polyphenol uniquely regulates SNARE zippering. However, the unique regulatory effect of each polyphenol in cells has not yet been examined. In the present study, we observed SNARE zippering in neuronal PC12 cells by measuring the fluorescence resonance energy transfer (FRET) changes of a cyan fluorescence protein (CFP) and a yellow fluorescence protein (YFP) fused to the N-termini or C-termini of SNARE proteins. We show that delphinidin and cyanidin inhibit the initial N-terminal nucleation of SNARE complex formation in a Ca{sup 2+}-independent manner, while myricetin inhibits Ca{sup 2+}-dependent transmembrane domain association of the SNARE complex in the cell. This result explains how polyphenols exhibit botulinum neurotoxin-like activity in vivo.

  18. Quantitative detection of settled coal dust over green canopy

    Science.gov (United States)

    Brook, Anna; Sahar, Nir

    2017-04-01

    The main task of environmental and geoscience applications are efficient and accurate quantitative classification of earth surfaces and spatial phenomena. In the past decade, there has been a significant interest in employing spectral unmixing in order to retrieve accurate quantitative information latent in in situ data. Recently, the ground-truth and laboratory measured spectral signatures promoted by advanced algorithms are proposed as a new path toward solving the unmixing problem in semi-supervised fashion. This study presents a practical implementation of field spectroscopy as a quantitative tool to detect settled coal dust over green canopy in free/open environment. Coal dust is a fine powdered form of coal, which is created by the crushing, grinding, and pulverizing of coal. Since the inelastic nature of coal, coal dust can be created during transportation, or by mechanically handling coal. Coal dust, categorized at silt-clay particle size, of particular concern due to heavy metals (lead, mercury, nickel, tin, cadmium, mercury, antimony, arsenic, isotopes of thorium and strontium) which are toxic also at low concentrations. This hazard exposes risk on both environment and public health. It has been identified by medical scientist around the world as causing a range of diseases and health problems, mainly heart and respiratory diseases like asthma and lung cancer. It is due to the fact that the fine invisible coal dust particles (less than 2.5 microns) long lodge in the lungs and are not naturally expelled, so long-term exposure increases the risk of health problems. Numerus studies reported that data to conduct study of geographic distribution of the very fine coal dust (smaller than PM 2.5) and related health impacts from coal exports, is not being collected. Sediment dust load in an indoor environment can be spectrally assessed using reflectance spectroscopy (Chudnovsky and Ben-Dor, 2009). Small amounts of particulate pollution that may carry a signature

  19. Hydrodynamic characteristics of high speed settling clarifiers by radiotracer method

    International Nuclear Information System (INIS)

    Griffith Martinez, J.; Flores Juan, P.; Cuesta Borges, J.; Damera Martinez, A.; Ramos Espinosa, K. A

    2005-01-01

    Results achieved in the evaluation of two high-speed settling cane juice Clarifiers, one denominated ICINAZ The Express and the other one with Low Residence Time (BTR), both located at the sugar factory Orlando Gonzalez employing the well established radiotracer method (Tc-99m) are presented. Several trials performed at the two Clarifiers demonstrated that the one identified as BTR was capable to assimilate the whole flow capacity of the factory with adequate characteristic of the pattern flux and residence time in the environment of 1 hour. In the other side, ICINAZ The Express Clarifier could only work at relative low flow capacity of the factory with residence time closely to the two hours and achieving occasionally a pattern flux seriously affected by fluctuations in the milling process. The radiotracer method was able to detect certain differences between the two clear juice outlet of the BTR Clarifier, probably due some problems in the construction of this equipment

  20. Estimate of Hanford Waste Rheology and Settling Behavior

    International Nuclear Information System (INIS)

    Poloski, Adam P.; Wells, Beric E.; Tingey, Joel M.; Mahoney, Lenna A.; Hall, Mark N.; Thomson, Scott L.; Smith, Gary Lynn; Johnson, Michael E.; Meacham, Joseph E.; Knight, Mark A.; Thien, Michael G.; Davis, Jim J.; Onishi, Yasuo

    2007-01-01

    The U.S. Department of Energy (DOE) Office of River Protection's Waste Treatment and Immobilization Plant (WTP) will process and treat radioactive waste that is stored in tanks at the Hanford Site. Piping, pumps, and mixing vessels have been selected to transport, store, and mix the high-level waste slurries in the WTP. This report addresses the analyses performed by the Rheology Working Group (RWG) and Risk Assessment Working Group composed of Pacific Northwest National Laboratory PNNL, Bechtel National Inc. (BNI), CH2M HILL, DOE Office of River Protection (ORP) and Yasuo Onishi Consulting, LLC staff on data obtained from documented Hanford waste analyses to determine a best-estimate of the rheology of the Hanford tank wastes and their settling behavior. The actual testing activities were performed and reported separately in referenced documentation. Because of this, many of the required topics below do not apply and are so noted

  1. Experiments in reduced gravity sediment settling on Mars

    CERN Document Server

    Kuhn, Nikolaus

    2014-01-01

    Experiments in Reduced Gravity: Sediment Settling on Mars is the first book to be published that reflects experiments conducted on Martian geomorphology in reduced gravity. This brief yet important book on sediment experiments assesses the theoretical and empirical foundation of the models used to analyze the increasing information we have on the past geography on Mars. The book also evaluates the need to develop new methods for analyzing new information by providing a conceptual outline and a case study on how experiments can be used to test current theoretical considerations. The conceptual approach to identifying the need for and role of experiments will be of interest to planetary scientists and geoscientists not necessarily involved with Mars, but those using experiments in their research who can apply the book's concepts. Includes figures, diagrams, illustrations, and photographs to vividly explore experiments and outcomes in reduced gravity Provides an outline of planned experiments and questions relat...

  2. M-Area Settling Basin and vicinity: Environmental information document

    International Nuclear Information System (INIS)

    Pickett, J.B.; Colven, W.P.; Bledsoe, H.W.

    1986-12-01

    This document provides environmental information on postulated closure options for the M-Area Settling Basin and vicinity at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a closure plan or other regulatory document to comply with required federal or state environmental regulations

  3. Preparation of air-settled, roll-thinned phosphorus targets

    CERN Document Server

    Lozowski, W R

    1999-01-01

    Red sup 3 sup 1 P targets of 2.6 and 2.9 mg/cm sup 2+-0.1 mg/cm sup 2 with 1-cmx2-cm side dimensions were prepared for a nuclear mass measurement which required good thickness uniformity. The thinner target, with 50 mu g/cm sup 2 of gold flashed on both surfaces, withstood a 173-MeV alpha beam of 175 nA for 18 h. Adaptations will be described for an Indiana University Cyclotron Facility air-settling method used to distribute phosphorus powder, as well as the methods developed for subsequent pressing, roll thinning, and dry release to obtain self-supporting targets. An envelope of gold foil, in contact with the phosphorus during each step, was instrumental in the process.

  4. Development of a new model for batch sedimentation and application to secondary settling tanks design.

    Science.gov (United States)

    Karamisheva, Ralica D; Islam, M A

    2005-01-01

    Assuming that settling takes place in two zones (a constant rate zone and a variable rate zone), a model using four parameters accounting for the nature of the water-suspension system has been proposed for describing batch sedimentation processes. The sludge volume index (SVI) has been expressed in terms of these parameters. Some disadvantages of the SVI application as a design parameter have been pointed out, and it has been shown that a relationship between zone settling velocity and sludge concentration is more consistent for describing the settling behavior and for design of settling tanks. The permissible overflow rate has been related to the technological parameters of secondary settling tank by simple working equations. The graphical representations of these equations could be used to optimize the design and operation of secondary settling tanks.

  5. Relationship structure-antioxidant activity of hindered phenolic compounds

    Directory of Open Access Journals (Sweden)

    Weng, X. C.

    2014-12-01

    Full Text Available The relationship between the structure and the antioxidant activity of 21 hindered phenolic compounds was investigated by Rancimat and DPPH· tests. 3-tert-butyl-5-methylbenzene-1,2-diol is the strongest antioxidant in the Rancimat test but not in the DPPH· test because its two hydroxyl groups have very strong steric synergy. 2,6-Ditert-butyl-4-hydroxy-methylphenol exhibits a strong antioxidant activity as 2,6-ditertbutyl- 4-methoxyphenol does in lard. 2,6-Ditert-butyl-4- hydroxy-methylphenol also exhibits stronger activity than 2-tert-butyl-4- methoxyphenol. The methylene of 2,6-ditert-butyl-4-hydroxy-methylphenol can provide a hydrogen atom to active free radicals like a phenolic hydroxyl group does because it is greatly activated by both the aromatic ring and hydroxyl group. Five factors affect the antioxidant activities of the phenolic compounds: how stable the phenolic compound free radicals are after providing hydrogen atoms; how many hy drogen atoms each of the phenolic compounds can provide; how fast the phenolic compounds provide hydrogen atoms; how easily the phenolic compound free radicals can combine with more active free radicals, and whether or not a new antioxidant can form after the phenolic compound provides hydrogen atoms.La relación entre estructura y la actividad antioxidante de 21 compuestos fenólicos con impedimentos estéricos fue investigado mediante ensayos con Rancimat y DPPH·. El 3-terc-butil-5-metilbenceno-1,2-diol es el antioxidante más potente en los ensayos mediante Rancimat pero no mediante ensayos con DPPH·, porque sus dos grupos hidroxilo tienen una fuerte sinergia estérica. El 2,6-Di-terc-butil-4-hidroxi-metil-fenol mostró una actividad antioxidante tan fuerte como el 2,6-di-ter-butil-4-metoxifenol en ensayos con manteca de cerdo. El 2,6-di-terc-butil-4-hidroxi-metilfenol también mostró una actividad más fuerte que el 2-terc-butil-4-metoxifenol. El grupo metileno del 2,6-di-ter-butil-4-hidroxi

  6. Computational Fluid Dynamics Modelling of Hydraulics and Sedimentation in Process Reactors during Aeration Tank Settling

    DEFF Research Database (Denmark)

    Jensen, M.D.; Ingildsen, P.; Rasmussen, Michael R.

    2006-01-01

    Aeration tank settling is a control method allowing settling in the process tank during highhydraulic load. The control method is patented. Aeration tank settling has been applied in several wastewater treatment plants using the present design of the process tanks. Some process tank designs...... and outletcausing a disruption of the sludge blanket at the outlet and thereby reducing the retention of sludge in theprocess tank. The model has allowed us to establish a clear picture of the problems arising at the plantduring aeration tank settling. Secondly, several process tank design changes have been...

  7. Characterization of the settling process for wastewater from a combined sewer system.

    Science.gov (United States)

    Piro, P; Carbone, M; Penna, N; Marsalek, J

    2011-12-15

    Among the methods used for determining the parameters necessary for design of wastewater settling tanks, settling column tests are used most commonly, because of their simplicity and low costs. These tests partly mimic the actual settling processes and allow the evaluation of total suspended solids (TSS) removal by settling. Wastewater samples collected from the Liguori Channel (LC) catchment in Cosenza (Italy) were subject to settling column tests, which yielded iso-removal curves for both dry and wet-weather flow conditions. Such curves were approximated well by the newly proposed power law function containing two empirical parameters, a and b, the first of which is the particle settling velocity and the second one is a flocculation factor accounting for deviations from discrete particle settling. This power law function was tested for both the LC catchment and literature data and yielded a very good fit, with correlation coefficient values (R(2)) ranging from 0.93 to 0.99. Finally, variations in the settling tank TSS removal efficiencies with parameters a and b were also analyzed and provided insight for settling tank design. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Optimization of the static occlusion by "occlusal surface settling" in the Cerec 3D software.

    Science.gov (United States)

    Späth, C; Kordass, B

    2006-04-01

    The adjustment of the static occlusion can be automated in computer-based systems. The Cerec 3D software makes it possible to take preformed occlusal surfaces from a database and adapt them to the antagonist. In this adaptation (settling), the CAD occlusal surface "settles" as whole or each cusp individually into the occlusal surface of the antagonist until stable occlusion is reached. Two occlusal surface shapes were compared: Vita Physiodens and Lee Culp. An index was formed from the number, quality, and position of the occlusal contacts for 35 model cases (25 molars, 10 premolars). With regard to the settling of the total occlusal surfaces, there were no differences between the two occlusal surface shapes. In "cusp settling" of the molars, Vita Physiodens performed significantly better. In the comparison of the 1st with the 3rd settling process, significant improvements occurred the 3rd time in many cases when settling individual cusps, but in clearly fewer cases in the settling process of the total occlusal surface. The Lee Culp tooth occlusion improved especially after the 3rd settling process of individual cusps. It is therefore expedient to combine both settling versions with one another.

  9. Quantitative detection of settled dust over green canopy

    Science.gov (United States)

    Brook, Anna

    2016-04-01

    The main task of environmental and geoscience applications are efficient and accurate quantitative classification of earth surfaces and spatial phenomena. In the past decade, there has been a significant interest in employing hyperspectral unmixing in order to retrieve accurate quantitative information latent in hyperspectral imagery data. Recently, the ground-truth and laboratory measured spectral signatures promoted by advanced algorithms are proposed as a new path toward solving the unmixing problem of hyperspectral imagery in semi-supervised fashion. This paper suggests that the sensitivity of sparse unmixing techniques provides an ideal approach to extract and identify dust settled over/upon green vegetation canopy using hyperspectral airborne data. Atmospheric dust transports a variety of chemicals, some of which pose a risk to the ecosystem and human health (Kaskaoutis, et al., 2008). Many studies deal with the impact of dust on particulate matter (PM) and atmospheric pollution. Considering the potential impact of industrial pollutants, one of the most important considerations is the fact that suspended PM can have both a physical and a chemical impact on plants, soils, and water bodies. Not only can the particles covering surfaces cause physical distortion, but particles of diverse origin and different chemistries can also serve as chemical stressors and cause irreversible damage. Sediment dust load in an indoor environment can be spectrally assessed using reflectance spectroscopy (Chudnovsky and Ben-Dor, 2009). Small amounts of particulate pollution that may carry a signature of a forthcoming environmental hazard are of key interest when considering the effects of pollution. According to the most basic distribution dynamics, dust consists of suspended particulate matter in a fine state of subdivision that are raised and carried by wind. In this context, it is increasingly important to first, understand the distribution dynamics of pollutants, and

  10. Bilateral patching in retinal detachment: fluid mechanics and retinal "settling".

    Science.gov (United States)

    Foster, William J

    2011-07-20

    When a patient suffers a retinal detachment and surgery is delayed, it is known clinically that bilaterally patching the patient may allow the retina to partially reattach or "settle." Although this procedure has been performed since the 1860s, there is still debate as to how such a maneuver facilitates the reattachment of the retina. Finite element calculations using commercially available analysis software are used to elucidate the influence of reduction in eye movement caused by bilateral patching on the flow of subretinal fluid in a physical model of retinal detachment. It was found that by coupling fluid mechanics with structural mechanics, a physically consistent explanation of increased retinal detachment with eye movements can be found in the case of traction on the retinal hole. Large eye movements increase vitreous traction and detachment forces on the edge of the retinal hole, creating a subretinal vacuum and facilitating increased subretinal fluid. Alternative models, in which intraocular fluid flow is redirected into the subretinal space, are not consistent with these simulations. The results of these simulations explain the physical principles behind bilateral patching and provide insight that can be used clinically. In particular, as is known clinically, bilateral patching may facilitate a decrease in the height of a retinal detachment. The results described here provide a description of a physical mechanism underlying this technique. The findings of this study may aid in deciding whether to bilaterally patch patients and in counseling patients on pre- and postoperative care.

  11. Hydrodynamic characteristics of high speed settling clarifiers by radiotracer method

    International Nuclear Information System (INIS)

    Griffith Martinez, Jose; Damera Martinez, A.; Ramos Espinosa, K.

    2003-01-01

    Results achieved in the evaluation of two high-speed settling cane juice Clarifiers, one denominated ICINAZ The Express and the other one a modified SRI, both located at the sugar factory Orlando Gonzalez employing the well established radiotracer method (Tc-99m) are presented Several trials performed simultaneously at the two Clarifiers demonstrated that the modified SRI was capable to assimilate the whole flow capacity of the factory with adequate characteristic of the pattern flux and residence time in the environment of 1 hour. In the other side, ICINAZ The Express Clarifier could only work at relative low flow capacity of the factory with residence time closely to the two hours and achieving occasionally a pattern flux seriously affected by fluctuations in the milling process. The non-availability of a flow meter did not allow to extract more information related to some pattern flux anomalies, nevertheless, the radiotracer method was able to detect certain differences between the two clear juice outlet of the modified SRI Clarifier, probably due some problems in the construction of this equipment. This fact so as other goals achieved in this work, show once more the potentiality of the radiotracer method for this type of study related to the hydrodynamic characteristics of industrial facilities. (Author)

  12. Spheres settling in an Oldroyd-B fluid

    Science.gov (United States)

    Pan, Tsorng-Whay; Glowinski, Roland

    2017-11-01

    In this talk we present a numerical study of the dynamics of balls settling in a vertical channel with a square cross-section filled with an Oldroyd-B fluid. For the case of two balls, two typical kinds of particle dynamics are obtained: (i) periodic interaction between two balls and (ii) the formation of a vertical chain of two balls. For the periodic interaction of two balls occurred at lower values of the elasticity number, two balls draft, kiss and break away periodically and the chain is not formed due to not strong enough elastic force. For slightly higher values of the elasticity number, two balls draft, kiss and break away a couple times first and then form a chain. Such chain finally becomes a vertical one after the oscillation damps out. For higher values of the elasticity number, two balls draft, kiss and form a vertical chain right away. The formation of three ball chain can be obtained at higher values of the elasticity number. This work was supported by NSF (Grant DMS-1418308).

  13. Time to settle the tax issue for the resource industry

    International Nuclear Information System (INIS)

    Mintz, J.M.

    2001-01-01

    This report presented a brief comment on policy issues concerning taxes imposed on the resource industry. It was suggested that if the resource industry in Canada is to remain competitive beyond the current boom, the federal government should provide a more stable tax environment for investment in the longer run. With the current internationally competitive tax rates and high neutrality among energy sectors, there is presently a unique opportunity to settle this issue and to improve the tax system as a whole. It was suggested that the federal corporate income tax rate on resource profits should be reduced from 28 per cent to 21 per cent as it is in other sectors. It was also suggested that the resource allowance should be replaced with deductibility for resource royalties as payment for the cost of using provincially owned resources. This report also described other changes that could be implemented to improve the tax system and to enhance the competitiveness of the resource sector. It was noted that the changes could result in a single corporate income tax rate on all industrial activities by 2005

  14. THE EPOCH OF DISK SETTLING: z ∼ 1 TO NOW

    International Nuclear Information System (INIS)

    Kassin, Susan A.; Gardner, Jonathan P.; Weiner, Benjamin J.; Willmer, C. N. A.; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Coil, Alison L.; Cooper, Michael C.; Devriendt, Julien; Dutton, Aaron A.; Metevier, A. J.; Noeske, Kai G.; Primack, Joel R.

    2012-01-01

    We present evidence from a sample of 544 galaxies from the DEEP2 Survey for evolution of the internal kinematics of blue galaxies with stellar masses ranging 8.0 * (M ☉ ) g ). It is unlike the typical pressure-supported velocity dispersion measured for early type galaxies and galaxy bulges. Because both seeing and the width of our spectral slits comprise a significant fraction of the galaxy sizes, σ g integrates over velocity gradients on large scales which can correspond to non-ordered gas kinematics. We compile measurements of galaxy kinematics from the literature over 1.2 < z < 3.8 and do not find any trends with redshift, likely for the most part, because these data sets are biased toward the most highly star-forming systems. In summary, over the last ∼8 billion years since z = 1.2, blue galaxies evolve from disordered to ordered systems as they settle to become the rotation-dominated disk galaxies observed in the universe today, with the most massive galaxies being the most evolved at any time.

  15. 45 CFR 2554.48 - Can the administrative complaint be settled voluntarily?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Can the administrative complaint be settled voluntarily? 2554.48 Section 2554.48 Public Welfare Regulations Relating to Public Welfare (Continued... Appeals § 2554.48 Can the administrative complaint be settled voluntarily? (a) Parties may make offers of...

  16. Heavy Metal and PAH Concentrations in Highway Runoff Deposits Fractionated on Settling Velocities

    DEFF Research Database (Denmark)

    Bentzen, Thomas Ruby; Larsen, Torben

    2009-01-01

    The correlation between settling velocity and associated pollutant concentrations is of major importance for best management practice in designing, redesigning, or evaluation of the efficiency of existing pond facilities for retaining unwanted pollutants. The prospect of this note is to state...... the relationship between the settling velocity of the runoff particles and the corresponding metal and polyaromatic hydrocarbon (PAH) concentration directly instead of dealing with two unknowns-the density and the shape of a single particle fraction in a settling velocity calculations. The measurements show...... and copper and there is no significant correlation between PAH concentration and settling velocity. The largest mass of metals and PAH within each pond can be found on the particle fraction with a settling velocity of 5.5-2.5 mm/s....

  17. Numerical Investigation of Effects of Inlet Placement and Characteristics of Baffles in Settling Tanks

    Directory of Open Access Journals (Sweden)

    Hamid Shamloo

    2012-12-01

    Full Text Available Settling tanks are one of the main parts of treatment plants and different parameters are effective in the settling tank performance. In this study effects of some of these parameters such as the situation of the inlet opening as well as the existence and position of baffles in the tanks are investigated.  2D numerical simulations of primary settling tanks are carried out using 2D Fluent software and the best position for the  inlet to enhance  the  their performance found  to be in the middle of the tank  with optimum size  of the baffle about 30% the height of settling tank  at a distance about 5-10% settling tank's length.

  18. Experimental analysis of turbulence effect in settling velocity of suspended sediments

    Directory of Open Access Journals (Sweden)

    H. Salinas–Tapia

    2008-01-01

    Full Text Available Settling velocities of sediment particles for different size ranges were measured in this work using PIV with the help of discriminatory filters. An experimental channel 10x15 cm cross section was used in order to obtain two set of turbulent characteristics corresponding with two different flow rates. The purpose was to analyze the effect of turbulence on the solids settling velocity. The technique allowed us to measure the individual settling velocity of the particles and the flow velocity field of the fluid. Capture and image analysis was performed with digital cameras (CCD using the software Sharp–provision PIV and the statistical cross correlation technique. Results showed that settling velocity of particles is affected by turbulence which enhances the fluid drag coefficient. Physical explanation of this phenomenon is related with the magnitude of the vertical fluctuating velocity of the fluid. However, more research is needed in order to define settling velocity formulas that takes into account this effect

  19. Temporal variation of floc size and settling velocity in the Dollard estuary

    Science.gov (United States)

    Van der Lee, Willem T. B.

    2000-09-01

    Temporal changes in floc size and settling velocity were measured in the Dollard estuary with an under water video camera. The results show that the flocs in the Dollard are very heterogeneous and that larger flocs have much lower effective densities than smaller flocs. Due to this density decrease, floc settling velocities show only a minor increase with increasing floc size. Floc sizes and settling velocities correlate with the suspended sediment concentration (SSC) on a tidal time scale, but not on a seasonal time scale. On a seasonal time scale floc sizes depend on the binding properties of the sediment, while floc settling velocities show hardly any variation, as an increase in floc size is mainly counterbalanced by a decrease in floc density. Tidal variations in settling velocity occur but cannot be modeled solely as a function of SSC, as the relation between floc size/settling velocity and SSC constantly changes in time and space. Settling velocity variations throughout the tide can however be expressed as a function of tidal phase.

  20. A protocol for amide bond formation with electron deficient amines and sterically hindered substrates

    DEFF Research Database (Denmark)

    Due-Hansen, Maria E; Pandey, Sunil K; Christiansen, Elisabeth

    2016-01-01

    A protocol for amide coupling by in situ formation of acyl fluorides and reaction with amines at elevated temperature has been developed and found to be efficient for coupling of sterically hindered substrates and electron deficient amines where standard methods failed.......A protocol for amide coupling by in situ formation of acyl fluorides and reaction with amines at elevated temperature has been developed and found to be efficient for coupling of sterically hindered substrates and electron deficient amines where standard methods failed....

  1. Development and validation of a novel monitoring system for batch flocculant solids settling process

    DEFF Research Database (Denmark)

    Valverde Pérez, Borja; Zhang, Xueqian; Penkarski-Rodon, Elena

    2017-01-01

    system able to monitor batch settling tests by tracking the sludge blanket height and solid concentration along the column in the range of 1 to 8 g L-1. The system could be efficiently applied to monitor the batch settling tests of several full scale treatment plants run under different operational......Secondary sedimentation is the main hydraulic bottleneck of effective pollution control WWTP under wetweather flow conditions. Therefore, online monitoring tools are required for control and optimization of the settling process under dynamic conditions. In this work we propose a novel monitoring...

  2. Computational Fluid Dynamics Modelling of Hydraulics and Sedimentation in Process Reactors During Aeration Tank Settling

    DEFF Research Database (Denmark)

    Dam Jensen, Mette; Ingildsen, Pernille; Rasmussen, Michael R.

    2005-01-01

    Aeration Tank Settling is a control method alowing settling in the process tank during high hydraulic load. The control method is patented. Aeration Tank Settling has been applied in several waste water treatment plant's using present design of the process tanks. Some process tank designs have...... shown to be more effective than others. To improve the design of less effective plants Computational Fluid Dynamics (CFD) modelling of hydraulics and sedimentation has been applied. The paper discusses the results at one particular plant experiencing problems with partly short-circuiting of the inlet...

  3. Feeling hindered by health problems and functional capacity at 60 years and above.

    Science.gov (United States)

    Fagerström, Cecilia; Holst, Göran; Hallberg, Ingalill R

    2007-01-01

    It is common to use activities of daily living (ADL) rating scales to identify the impact of health problems such as diseases, impaired eyesight or hearing on daily life. However, for various reasons people with health problems might feel hindered in daily life before limitations in ability to perform ADL have occurred. In addition, there is sparse knowledge of what makes people feel hindered by health problems in relation to their ADL capacity. The aim was to investigate feeling hindered by health problems among 1297 people aged 60-89 living at home in relation to ADL capacity, health problems, life satisfaction, self-esteem, and social and financial resources, using a self-reported questionnaire, including questions from Older Americans' Resources and Services schedule (OARS), Rosenberg's self-esteem and Life Satisfaction Index Z (LSIZ). People feeling greatly hindered by health problems rarely had anyone who could help when they needed support, had lower life satisfaction and self-esteem than those not feeling hindered. Feeling hindered by health problems appeared to take on a different meaning depending on ADL capacity, knowledge that seems essential to include when accomplishing health promotion and rehabilitation interventions, especially at the early stages of reduced ADL capacity.

  4. Accumulation of Settling Particles in Some Coral Reef Areas of Peninsular Malaysia

    International Nuclear Information System (INIS)

    Lee, J.N.; Che Abdul Rahim Mohamed

    2011-01-01

    The aim of this study was to determine the accumulation of settling particles in coral reefs of Peninsular Malaysia. Settling particles were collected from the coral reefs of Port Dickson, Pulau Langkawi, Pulau Tioman, Pulau Redang and Pulau Tinggi from 2005 to 2008. The average total settling particles in Pulau Langkawi and Port Dickson was 49.8 mg/ cm 2 / day, while for Pulau Tioman, Pulau Redang, and Pulau Tinggi was 3.5 mg/ cm 2 / day. The results showed that accumulations rate in west coast were higher than east coast of Peninsular Malaysia. However, Pulau Tioman in the east coast received high accumulations rate of settling particles in certain times of the year due to sediment resuspension at shallow reefs caused by high energy seasonal yearly wave and monsoon. (author)

  5. Dynamic modeling of sludge compaction and consolidation processes in wastewater secondary settling tanks.

    Science.gov (United States)

    Abusam, A; Keesman, K J

    2009-01-01

    The double exponential settling model is the widely accepted model for wastewater secondary settling tanks. However, this model does not estimate accurately solids concentrations in the settler underflow stream, mainly because sludge compression and consolidation processes are not considered. In activated sludge systems, accurate estimation of the solids in the underflow stream will facilitate the calibration process and can lead to correct estimates of particularly kinetic parameters related to biomass growth. Using principles of compaction and consolidation, as in soil mechanics, a dynamic model of the sludge consolidation processes taking place in the secondary settling tanks is developed and incorporated to the commonly used double exponential settling model. The modified double exponential model is calibrated and validated using data obtained from a full-scale wastewater treatment plant. Good agreement between predicted and measured data confirmed the validity of the modified model.

  6. Settling and survival profile of enteric pathogens in the swine effluent for water reuse purpose.

    Science.gov (United States)

    Fongaro, G; Kunz, A; Magri, M E; Schissi, C D; Viancelli, A; Philippi, L S; Barardi, C R M

    2016-11-01

    The present study evaluated the pathogens persistence and settling profile in swine effluent. We determined the enteric pathogens settling characteristics, their survival and inactivation profile in swine effluent (for water reuse purpose) and in sludge (generated after aerobic treatment - during secondary settling process). The study was performed in laboratorial-scale and in full-scale (manure treatment plant). Enteric viruses and enteric bacteria were used as biomarkers. Results showed that these enteric pathogens were significantly reduced from swine effluent during secondary settling process, and enteric viruses removal was correlated with the suspended solids decantation. The design of secondary settlers can be adapted to improve pathogens removal, by diminishing the solids loading rate per area and time, ending in higher hydraulic retention times. Copyright © 2016 Elsevier GmbH. All rights reserved.

  7. The Effect of Low Energy Turbulence in Estuary Margins on Fine Sediment Settling

    Science.gov (United States)

    Allen, R. M.; MacVean, L. J.; Tse, I.; Mazzaro, L. J.; Stacey, M. T.; Variano, E. A.

    2014-12-01

    Sediment dynamics in estuaries and near shore regions control the growth or erosion of the bed and fringing wetlands, determine the spread of sediment-associated contaminants, and limit the light availability for primary productivity through turbidity. In estuaries such as San Francisco Bay, this sediment is often cohesive, and can flocculate. Changes to the composition of the sediment and waters, the suspended sediment concentration, and the turbulence can all affect the flocculation of suspended sediment. In turn, flocculation controls the particle diameter, settling velocity, density, and particle inertia. These sediment properties drive the turbulent diffusivity, which balances with the settling velocity to impact the vertical distribution of sediment in the water column. The vertical profile strongly affects how sediment is transported through the estuary by lateral flow. Turbulence may also impact settling velocity in non-cohesive particles. In turbulence, dense particles may get trapped in convergent flow regions, thus particles are more likely to get swept along the downward side of a turbulent eddy than the upward side, resulting in enhanced settling velocities. We isolated the impacts of turbulence level, particle size and type, and suspended sediment concentration on particle settling velocities using uniform grain size particles in homogeneous isotropic turbulence. Controlling the turbulence in a well-defined turbulence tank, we used Two Acoustic Doppler Velocimeters, separated vertically, to measure turbulent velocities (w') and suspended sediment concentrations (C), which yield condition dependent settling velocities (ws), via equation 1. Lab characterization of particle settling velocities help to validate the method for measuring settling velocities in the field, and will serve as a foundation for an extensive field experiment in San Francisco Bay. Characterizing the velocity enhancement relative to the Stokes number, the Rouse number, and the

  8. Food Poverty Profile in Settled Pastrol Households of Lowland Marsabit: Evidence from Micro Data

    International Nuclear Information System (INIS)

    Nyamori, B.

    2002-01-01

    Frequent and severe droughts experienced in ASALs push pastoralists out of the traditional livestock monoculture, which together with the growing human population lead to increasing settlement. Unlike nomads who access traditional livestock foods at all times, settled households have limited access, which does not guarantee their food security. To achieve the food security the settled households supplement limited livestock foods with market foods. High demand for market foods increases demand for money and since pastoral communities have limited income-generating opportunities, many households are relegated to below food poverty line. Most studies on food security in ASALs focus on livestock productivity without considering that settled households depend, to a small extent, on livestock foods. Since settled households experience a lot of socio-economic changes,their food security status needs to be appropriately evaluated. The aim of this study t is to establish the food poverty profile of the settled households and recommend appropriate measures for attaining food security in the settled households

  9. Turbulent particle transport in streams: can exponential settling be reconciled with fluid mechanics?

    Science.gov (United States)

    McNair, James N; Newbold, J Denis

    2012-05-07

    Most ecological studies of particle transport in streams that focus on fine particulate organic matter or benthic invertebrates use the Exponential Settling Model (ESM) to characterize the longitudinal pattern of particle settling on the bed. The ESM predicts that if particles are released into a stream, the proportion that have not yet settled will decline exponentially with transport time or distance and will be independent of the release elevation above the bed. To date, no credible basis in fluid mechanics has been established for this model, nor has it been rigorously tested against more-mechanistic alternative models. One alternative is the Local Exchange Model (LEM), which is a stochastic advection-diffusion model that includes both longitudinal and vertical spatial dimensions and is based on classical fluid mechanics. The LEM predicts that particle settling will be non-exponential in the near field but will become exponential in the far field, providing a new theoretical justification for far-field exponential settling that is based on plausible fluid mechanics. We review properties of the ESM and LEM and compare these with available empirical evidence. Most evidence supports the prediction of both models that settling will be exponential in the far field but contradicts the ESM's prediction that a single exponential distribution will hold for all transport times and distances. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. In situ determination of flocculated suspended material settling velocities and characteristics using a floc camera

    Science.gov (United States)

    Schoellhamer, David H.; Haught, Dan; Manning, Andrew

    2012-01-01

    Estimates of suspended sediment settling are necessary for numerical sediment models, water quality studies, and rehabilitation of coastal ecosystems. Settling of cohesive sediment, which is common in estuaries, is more difficult to quantify than noncohesive sediment because of flocculation. Flocs are composed of an aggregation of finer silts, clays, and organic material. Floc characteristics, such as the diameter, density, porosity, and water content determine floc settling velocities. A floc camera provides the ability to capture the settling velocities and other desired characteristics of individual flocs in situ. Water samples taken using a Van Dorn sampler are immediately subsampled using a pipette and transferred to the floc camera. The Perspex settling column is outfitted with a LED backlighting to distinguish flocs. The floc camera’s high pixel and temporal resolution allows image analysis software to detect individual flocs and process floc statistics per image. Observed changes in floc location with respect to time presents a way of calculating settling velocities. This work presents results of validation tests with known sediment size distributions and of deployment of the camera during a field study.

  11. CHARACTERIZATION AND SETTLING TESTS WITH TANK 51H SLURRY SAMPLES HTF-076-081

    International Nuclear Information System (INIS)

    HAY, MICHAEL

    2006-01-01

    Sludge Batch 4 (SB4) is the next sludge batch being prepared for feed to the Defense Waste Processing Facility (DWPF). SB4 includes sludge from Tanks 5F, 6F, and 11H and heels from Tanks 7F and 51H. In preparation of SB4, sludge was transferred from Tank 11H to Tank 51H. The sludge currently in Tank 51H has been found to settle at slower rates than previous sludge batches. The slow sludge settling in Tank 51H impacts the ability to wash SB4 to the desired final weight percent insoluble solids and sodium endpoint. This could impact the ability to have SB4 ready on time to support DWPF and result in increased recycle back to the Tank Farm, reduced waste loading at DWPF, and lengthened cycle time in the DWPF Chemical Processing Cell (CPC) Sludge Receipt and Adjustment Tank (SRAT). The Savannah River National Laboratory (SRNL) was requested to characterize and investigate the slower settling rate with six slurry dip samples of Tank 51H sludge. The filtered supernate and the total dried solids of the sludge were analyzed and summaries of the results published in the references listed below. The sludge composition was found to be consistent with H-Area high aluminum sludge. Difficulties were encountered with dissolving all of the material in the dried sludge solids. An analysis of the undissolved material from the digestions found the main constituent was Boehmite (AlO(OH)). This report provides all of the compositional data and an analysis of the data with recommended values to use for the composition of the Tank 51H composite sample. Tables 3-2 through 3-4 provide the composition of the Tank 51H composite sample. Settling tests conducted with the Tank 51H sludge showed a much slower settling rate than with the sludge in Sludge Batch 3 (SB3). A mixture of Tank 51H and sludge from SB3 was prepared to mimic the projected final composition of Sludge Batch 4 (SB4). The mixture showed minimal improvement in the settling rate versus Tank 51H sludge alone. An attempt to

  12. Sludge settling processes in SBR-related sewage treatment plants according to the Biocos method.

    Science.gov (United States)

    Meusel, S; Englert, R

    2004-01-01

    This paper describes the investigations in a sedimentation and circulation reactor (SU-reactor) of a three-phase Biocos plant. The aim of these investigations was the determination of the temporal and depth-dependent distribution of suspended solid contents, as well as describing the sludge sedimentation curves. The calculated results reveal peculiarities of the Biocos method with regard to sedimentation processes. In the hydraulically uninterrupted (pre-)settling phase, a sludge level depth was observed, which remained constant over the reactor surface and increased linearly according to the sludge volume. The settling and the thickening processes of this phase corresponded to a large extent to the well-known settling test in a one-litre measuring cylinder. During the discharge phase, the investigated settling rate was overlaid by the surface loading rate and the sludge level changed depending on the difference between those two parameters. The solid distribution of the A-phase indicated a formation of functional zones, which were influenced by the surface loading. The formation was comparable to the formation of layers in secondary settling tanks with vertical flow. The concentration equalisation between the biological reactor and the SU-reactor proved to be problematic during the circulation phase, because a type of internal sludge circulation occurred in the SU-reactor. A permanent sludge recirculation seems to be highly recommendable.

  13. Effects of Phytoplankton Growth Phase on Delayed Settling Behavior of Marine Snow Aggregates at Sharp Density Transitions

    Science.gov (United States)

    Proctor, K. W.; Montgomery, Q. W.; Prairie, J. C.

    2016-02-01

    Marine snow aggregates play a fundamental role in the marine carbon cycle. Since marine snow aggregates are larger and thus sink faster than individual phytoplankton, aggregates often dominate carbon flux. Previous studies have shown that marine snow aggregates will significantly decrease their settling velocity when passing through sharp density transitions within the ocean, a phenomenon defined as delayed settling. Given the importance of aggregate settling to carbon export, these small-scale changes in aggregate settling dynamics may have significant impacts on the efficiency of the biological pump. However, there is still a lack of knowledge about how different physical properties of aggregates can affect this delayed settling. In this study, we investigated the effect of phytoplankton growth phase on delayed settling behavior. Using phytoplankton cultures stopped at four different growth phases, we formed marine snow aggregates in the laboratory in rotating cylindrical tanks. We then observed individual aggregates as they settled through a stratified tank. We will present data which illustrates that aggregates experience greatly reduced settling rates when passing through sharp density gradients and that the growth phase of the phytoplankton used to form these aggregates has a significant effect on this delayed settling behavior. A thorough understanding of the impact of phytoplankton growth phase on the delayed settling behavior of marine snow will offer insight into the way phytoplankton growth phase may influence the efficiency of the biological pump, carbon flux, and the carbon cycle as a whole.

  14. Helpful and Hindering Multicultural Events in Group Supervision: Climate and Multicultural Competence

    Science.gov (United States)

    Kaduvettoor, Anju; O'Shaughnessy, Tiffany; Mori, Yoko; Beverly, Clyde, III; Weatherford, Ryan D.; Ladany, Nicholas

    2009-01-01

    This study examines the relationship between multicultural events in group supervision, group climate, and supervisee multicultural competence using a mixed qualitative/quantitative design. The discovery-oriented approach yielded 196 helpful and hindering multicultural events among 136 participants. The most common events included multicultural…

  15. The Experience of Unemployment for Fishery Workers in Newfoundland: What Helps and Hinders.

    Science.gov (United States)

    Borgen, William A.; Amundson, Norman E.; McVicar, Jonathan

    2002-01-01

    Explores the unemployment experience of people involved in the fishery and living in the outports of Newfoundland and Labrador. Fifty-three critical incident interviews were conducted by community outreach workers. These interviews yielded important information about the factors that facilitated or hindered the unemployment experience. (Contains…

  16. Factors that Promote or Hinder Young Disabled People in Work Participation: A Systematic Review

    NARCIS (Netherlands)

    Achterberg, T. J.; Wind, H.; de Boer, A. G. E. M.; Frings-Dresen, M. H. W.

    2009-01-01

    Introduction The aim of this systematic review was to study factors which promote or hinder young disabled people entering the labor market. Methods We systematically searched PubMed (by means of MESH and text words), EMBASE, PsycINFO, Web of Science and CINAHL for studies regarding (1) disabled

  17. Settling properties of aerobic granular sludge (AGS) and aerobic granular sludge molasses (AGSM)

    Science.gov (United States)

    Mat Saad, Azlina; Aini Dahalan, Farrah; Ibrahim, Naimah; Yasina Yusuf, Sara; Aqlima Ahmad, Siti; Khalil, Khalilah Abdul

    2018-03-01

    Aerobic granulation technology is applied to treat domestic and industrial wastewater. The Aerobic granular sludge (AGS) cultivated has strong properties that appears to be denser and compact in physiological structure compared to the conventional activated sludge. It offers rapid settling for solid:liquid separation in wastewater treatment. Aerobic granules were developed using sequencing batch reactor (SBR) with intermittent aerobic - anaerobic mode with 8 cycles in 24 hr. This study examined the settling velocity performance of cultivated aerobic granular sludge (AGS) and aerobic granular sludge molasses (AGSM). The elemental composition in both AGS and AGSM were determined using X-ray fluorescence (XRF). The results showed that AGSM has higher settling velocity 30.5 m/h compared to AGS.

  18. Nodalisation of the Marviken pressuriser and inter-volume gravitational settling

    International Nuclear Information System (INIS)

    Williams, D.A.

    1989-04-01

    A long-standing issue in the calculation of aerosol transport phenomena is the treatment of gravitational sedimentation in volumes which have no real settling surfaces. The VICTORIA primary circuit computer code has been extended to model inter-volume settling, and has been used to evaluate the importance of this mechanism for Marviken test 2b. The main conclusion of this study is that the neglect of inter-volume settling may result in the distortion of predicted deposition profiles and aerosol size distributions under certain conditions. These errors in the predicted aerosol behaviour may then give rise to further complications downstream. The results of the VICTORIA calculations are in good agreement with the data from test 2b. (author)

  19. Hydrodynamics of a continuous vertical settling tank of the plate type with separation of extractive emulsions

    International Nuclear Information System (INIS)

    Muratov, V.M.; Lyubimov, V.K.; Rakovets, S.M.; Kucharina, G.G.

    1987-01-01

    The authors present the results of an investigation of the continuous process of separation of extractive emulsion in a long vertical plate-like settling tank used in mixing-settling extractors. The object of study consisted of a section of the mixer-settler with pulsational mixing and a platelike settler 60 mm wide, 1000 mm long, and 300 mm high, made of acrylic plastic. The setup was used to demonstrate the circulation of each of the reagents (phases) in its own contour; they were injected into the mixing chamber by submersible centrifugal pumps, one placed in the volume with the light phase and the other in the volume with the heavy phase. After separation in the settling tank the liquid phases were each continuously poured into their own volume

  20. Formulation and Validation of an Efficient Computational Model for a Dilute, Settling Suspension Undergoing Rotational Mixing

    Energy Technology Data Exchange (ETDEWEB)

    Sprague, Michael A.; Stickel, Jonathan J.; Sitaraman, Hariswaran; Crawford, Nathan C.; Fischer, Paul F.

    2017-04-11

    Designing processing equipment for the mixing of settling suspensions is a challenging problem. Achieving low-cost mixing is especially difficult for the application of slowly reacting suspended solids because the cost of impeller power consumption becomes quite high due to the long reaction times (batch mode) or due to large-volume reactors (continuous mode). Further, the usual scale-up metrics for mixing, e.g., constant tip speed and constant power per volume, do not apply well for mixing of suspensions. As an alternative, computational fluid dynamics (CFD) can be useful for analyzing mixing at multiple scales and determining appropriate mixer designs and operating parameters. We developed a mixture model to describe the hydrodynamics of a settling cellulose suspension. The suspension motion is represented as a single velocity field in a computationally efficient Eulerian framework. The solids are represented by a scalar volume-fraction field that undergoes transport due to particle diffusion, settling, fluid advection, and shear stress. A settling model and a viscosity model, both functions of volume fraction, were selected to fit experimental settling and viscosity data, respectively. Simulations were performed with the open-source Nek5000 CFD program, which is based on the high-order spectral-finite-element method. Simulations were performed for the cellulose suspension undergoing mixing in a laboratory-scale vane mixer. The settled-bed heights predicted by the simulations were in semi-quantitative agreement with experimental observations. Further, the simulation results were in quantitative agreement with experimentally obtained torque and mixing-rate data, including a characteristic torque bifurcation. In future work, we plan to couple this CFD model with a reaction-kinetics model for the enzymatic digestion of cellulose, allowing us to predict enzymatic digestion performance for various mixing intensities and novel reactor designs.

  1. Sedimentation from flocculated suspensions in the presence of settling-driven gravitational interface instabilities

    Science.gov (United States)

    Rouhnia, Mohamad; Strom, Kyle

    2015-09-01

    We experimentally examine sedimentation from a freshwater suspension of clay flocs overlying saltwater in the presence of gravitational instabilities. The study seeks to determine: (1) if flocculation hampers or alters interface instability formation; (2) how the removal rates of sediment from the buoyant layer compare to those predicted by individual floc settling; and (3) whether or not it is possible to develop a model for effective settling velocity. The experiments were conducted in a tank at isothermal conditions. All experiments were initially stably stratified but later developed instabilities near the interface that grew into downward convecting plumes of fluid and sediment. Throughout, we measured sediment concentration in the upper and lower layers, floc size, and plume descent rates. The data showed that flocculation modifies the mixture settling velocity, and therefore shifts the mode of interface instability from double-diffusive (what one would expect from unflocculated clay) to settling-driven leaking and Rayleigh-Taylor instability formation. Removal rates of sediment from the upper layer in the presence of these instabilities were on the same order of magnitude as those predicted by individual floc settling. However, removal rates were found to better correlate with the speed of the interface plumes. A simple force-balance model was found to be capable of reasonably describing plume velocity based on concentration in the buoyant layer. This relation, coupled with a critical Grashof number and geometry relations, allowed us to develop a model for the effective settling velocity of the mixture based solely on integral values of the upper layer.

  2. Depth-variable settlement patterns and predation influence on newly settled reef fishes (Haemulon spp., Haemulidae.

    Directory of Open Access Journals (Sweden)

    Lance K B Jordan

    Full Text Available During early demersal ontogeny, many marine fishes display complex habitat-use patterns. Grunts of the speciose genus Haemulon are among the most abundant fishes on western North Atlantic coral reefs, with most species settling to shallow habitats (≤12 m. To gain understanding into cross-shelf distributional patterns exhibited by newly settled stages of grunts (<2 cm total length, we examined: 1 depth-specific distributions of congeners at settlement among sites at 8 m, 12 m, and 21 m, and 2 depth-variable predation pressure on newly settled individuals (species pooled. Of the six species identified from collections of newly settled specimens (n = 2125, Haemulon aurolineatum (tomtate, H. flavolineatum (French grunt, and H. striatum (striped grunt comprised 98% of the total abundance; with the first two species present at all sites. Prevalence of H. aurolineatum and H. flavolineatum decreased substantially from the 8-m site to the two deeper sites. In contrast, H. striatum was absent from the 8-m site and exhibited its highest frequency at the 21-m site. Comparison of newly settled grunt delta density for all species on caged (predator exclusion and control artificial reefs at the shallowest site (8-m revealed no difference, while the 12-m and 21-m sites exhibited significantly greater delta densities on the caged treatment. This result, along with significantly higher abundances of co-occurring piscivorous fishes at the deeper sites, indicated lower predation pressure at the 8-m site. This study suggests habitat-use patterns of newly settled stages of some coral reef fishes that undergo ontogenetic shifts are a function of depth-variable predation pressure while, for at least one deeper-water species, proximity to adult habitat appears to be an important factor affecting settlement distribution.

  3. Differences in in vitro dissolution properties of settled and airborne uranium material

    International Nuclear Information System (INIS)

    Scripsick, R.C.; Crist, K.C.; Tillery, M.I.; Soderholm, S.C.

    1984-01-01

    The dissolution behavior of settled and airborne uranium material produced by firing of depleted uranium munitions was studied using an in vitro dissolution technique. Differences in the composition of bulk and respirable fraction samples of these materials were observed. Dissolution analysis results suggest that under some conditions a rapidly dissolving uranium fraction may be formed. This fraction may play an important role in determining hazard potential associated with inhalation exposure to uranium materials. The fact that a larger rapidly dissolving fraction was observed in the airborne material than in the settled material indicates that dissolution analysis should be performed on appropriate size fraction samples. 20 references, 3 figures, 4 tables

  4. Settling distances of benthic invertebrates in a sediment mobilization simulation in semi-natural flumes

    Directory of Open Access Journals (Sweden)

    Maria Cristina Bruno

    2015-10-01

    Full Text Available Drift time and distance depend on the ability of the drifting invertebrates to alter their body posture or by swimming, and these behaviors may change according to the local hydraulic environment, resulting in different distances travelled before exiting the drift. Such drift and settlement mediated invertebrate movement determine dispersal processes and ultimately generates distribution patterns within streams. We conducted an experiment in an open-air, artificial flume system directly fed by an Alpine stream, where we disturbed the sediment in the flumes, inducing catastrophic drift in the benthic community, and then assessed the settlement distances of benthic invertebrates. For each flume, we collected drift samples by disturbing the substrate at 1.5 m intervals, at increasing distance from the downstream end, for a total of 7 disturbances and a maximum settling distance of 10 m in each flume, with five replicates (i.e., five flumes for each disturbance. The disturbances induced a massive catastrophic drift in Ephemeroptera, Plecoptera and Trichoptera, always higher than the behaviorally-occurring basedrift. The Settling Index calculated over the total drift collected at each distance increased with increasing distance, and after 10 m, 90% of the drifting animals had settled. Evenness and taxa richness progressively decrease with increasing settling distance. All drifting taxa were represented mainly by young instars. We used the drift collected at 1 m from the disturbance to standardize the remaining samples, based on the assumption that 1 m is not a distance long enough to allow animals to settle at that water velocity. We calculated the percentage of possible drifters which settled by computing a Settling Index for each taxon. The drifting taxa listed by decreasing Settling Index scores were Epeorus sp., Rhithrogena semicolorata, Isoperla spp., Sericostoma spp., Ecdyonurus spp., Nemoura spp., Leuctra spp., Baetis spp., Hydropsyche spp

  5. Gravitational settling of a highly concentrated system of solid spherical particles

    Science.gov (United States)

    Arkhipov, V. A.; Usanina, A. S.

    2017-09-01

    In the present paper, we report on the results of an experimental study of the process of gravity sedimentation of a cloud of monodispersed solid spherical particles with initial volume concentration C > 0.03, which was performed in a wide range of Reynolds numbers. An analytical estimate of the settling regimes of spherical particle clouds is presented. A new method for creating a spherical particle cloud with a high concentration of particles is proposed. A qualitative picture of the settling process of a highly concentrated particle cloud under gravity is revealed. A criterial dependence for the drag coefficient of a sedimenting spherical particle cloud as an entity is obtained.

  6. Estimation of settling velocity of sediment particles in estuarine and coastal waters

    Science.gov (United States)

    Nasiha, Hussain J.; Shanmugam, Palanisamy

    2018-04-01

    A model for estimating the settling velocity of sediment particles (spherical and non-spherical) in estuarine and coastal waters is developed and validated using experimental data. The model combines the physical, optical and hydrodynamic properties of the particles and medium to estimate the sediment settling velocity. The well-known Stokes law is broadened to account for the influencing factors of settling velocity such as particle size, shape and density. To derive the model parameters, laboratory experiments were conducted using natural flaky seashells, spherical beach sands and ball-milled seashell powders. Spectral light backscattering measurements of settling particles in a water tank were made showing a distinct optical feature with a peak shifting from 470-490 nm to 500-520 nm for particle populations from spherical to flaky grains. This significant optical feature was used as a proxy to make a shape determination in the present model. Other parameters experimentally determined included specific gravity (ΔSG) , Corey shape factor (CSF) , median grain diameter (D50) , drag coefficient (Cd) and Reynolds number (Re) . The CSF values considered ranged from 0.2 for flaky to 1.0 for perfectly spherical grains and Reynolds numbers from 2.0 to 105 for the laminar to turbulent flow regimes. The specific gravity of submerged particles was optically derived and used along with these parameters to estimate the sediment settling velocity. Comparison with the experiment data showed that the present model estimated settling velocities of spherical and non-spherical particles that were closely consistent with the measured values. Findings revealed that for a given D50, the flaky particles caused a greater decrease in settling velocity than the spherical particles which suggests that the particle shape factor has a profound role in influencing the sediment settling velocity and drag coefficients, especially in transitional and turbulent flow regimes. The present model can

  7. Concentration-driven models revisited: towards a unified framework to model settling tanks in water resource recovery facilities

    OpenAIRE

    Torfs, Elena; Marti, M. Carmen; Locatelli, Florent; Balemans, Sophie; Burger, Raimund; Diehl, Stefan; Laurent, Julien; Vanrolleghem, Peter A.; Francois, Pierre; Nopens, Ingmar

    2017-01-01

    A new perspective on the modelling of settling behaviour in water resource recovery facilities is introduced. The ultimate goal is to describe in a unified way the processes taking place both in primary settling tanks (PSTs) and secondary settling tanks (SSTs) for a more detailed operation and control. First, experimental evidence is provided, pointing out distributed particle properties (such as size, shape, density, porosity, and flocculation state) as an important common source of distribu...

  8. Competences for enhancing interprofessional collaboration in a paediatrics setting: Enabling and hindering factors.

    Science.gov (United States)

    Solevåg, Anne Lee; Karlgren, Klas

    2016-01-01

    In 2011 an interprofessional educational programme called "Pediatric systematic assessment and communication for preventing emergencies" designed to increase clinical staff's competence in treating sick children was introduced in one paediatrics department in Norway. To elicit an in-depth understanding of the perceptions of clinical staff about the programme and enact adjustments according to identified enabling and hindering factors for learning, nurses and paediatricians were invited to participate in focus group interviews. The interviews were analysed by content analysis. Enabling factors for learning included improved interprofessional collaboration and positive feedback on performance. Hindering factors included perceptions that the programme was redundant and the fact that collaborating departments, such as the surgical departments, were not familiar with the programme. Peer learning, more interprofessional learning activities, and the fostering of a learning organization were suggestions for sustained learning. Based on the results of the study we have now included collaborating departments in the programme.

  9. Fusion hindrance in reactions with very heavy ions: Border between normal and hindered fusion

    International Nuclear Information System (INIS)

    Shen Caiwan; Li Qingfeng; Boilley, David; Shen Junjie; Abe, Yasuhisa

    2011-01-01

    The fusion hindrance in heavy-ion collisions is studied in the framework of the two-center liquid drop model. It appears that the neck and the radial degrees of freedom might both be hampered by an inner potential barrier on their path between the contact configuration to the compound nucleus. Heavy-ion reactions with and without the two kinds of fusion hindrance are classified through systematic calculations. It is found that the number of reactions without radial fusion hindrance is much smaller than that without neck fusion hindrance, and for both kinds of fusion hindrance the number of reactions without fusion hindrance at small mass-asymmetry parameter α is smaller than that at large α. In the formation of a given compound nucleus, if a reaction with α c is not hindered, then other reactions with α>α c are also not hindered, as is well known experimentally.

  10. Helmint eggs elimination performance during lammelar settling and sand filters in Beniel WWTP (Murcia, Spain)

    International Nuclear Information System (INIS)

    Simon Andreu, P. J.; Cardin Mifsut, C.; Pacheco Ballarin, S.; Martinez Muro, M. A.; Vicente Gonzalez, J. A.; Llosar Llacer, C.

    2010-01-01

    With this study, it was observed Ascaris suum eggs elimination yield of tertiary treatment in Beniel wastewater treatment plant (WWTP) in Murcia Region (Spain). It was inoculated a sample of Ascaris suum eggs in the treatment in maximum flow conditions and it was calculated the retention yield of the lamellar settling and sand filters. (Author) 3 refs.

  11. Factors controlling the field settling velocity of cohesive sediment in estuaries

    DEFF Research Database (Denmark)

    Pejrup, Morten; Mikkelsen, Ole

    2010-01-01

    in the correlation of the description of W-50 and the controlling parameters from each area can be obtained. A generic algorithm describing the data from all the investigated areas is suggested. It works well within specific tidal areas but fails to give a generic description of the field settling velocity....

  12. Recognizing the ‘sparsely settled forest’: Multi-decade socioecological change dynamics and community exemplars

    Science.gov (United States)

    Derek B. Van Berkel; Bronwyn Rayfield; Sebastián Martinuzzi; Martin J. Lechowicz; Eric White; Kathleen P. Bell; Chris R. Colocousis; Kent F. Kovacs; Anita T. Morzillo; Darla K. Munroe; Benoit Parmentier; Volker C. Radeloff; Brian J. McGill

    2018-01-01

    Sparsely settled forests (SSF) are poorly studied, coupled natural and human systems involving rural communities in forest ecosystems that are neither largely uninhabited wildland nor forests on the edges of urban areas. We developed and applied a multidisciplinary approach to define, map, and examine changes in the spatial extent and structure of both the landscapes...

  13. 13 CFR 142.38 - Can the administrative complaint be settled voluntarily?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can the administrative complaint be settled voluntarily? 142.38 Section 142.38 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 142.38 Can the administrative...

  14. 45 CFR 681.42 - Can the administrative complaint be settled voluntarily?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Can the administrative complaint be settled voluntarily? 681.42 Section 681.42 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 681.42 Can the...

  15. Integrated real time control of influent pumping station and primary settling tanks at WWTP Eindhoven

    NARCIS (Netherlands)

    van Daal-Rombouts, P.M.M.; de Jonge, J; Langeveld, J.G.; Clemens, F.H.L.R.

    2016-01-01

    This research deals with the design and implementation of an integrated control for the WWTP of Eindhoven. The control influences the operation of the primary settling tanks and influent pumping station to reduce reduce ammonia peaks in the WWTP effluent. The control takes into account the treatment

  16. Measuring water and sediment discharge from a road plot with a settling basin and tipping bucket

    Science.gov (United States)

    Thomas A. Black; Charles H. Luce

    2013-01-01

    A simple empirical method quantifies water and sediment production from a forest road surface, and is well suited for calibration and validation of road sediment models. To apply this quantitative method, the hydrologic technician installs bordered plots on existing typical road segments and measures coarse sediment production in a settling tank. When a tipping bucket...

  17. Computational fluid dynamics modelling of hydraulics and sedimentation in process reactors during aeration tank settling.

    Science.gov (United States)

    Jensen, M D; Ingildsen, P; Rasmussen, M R; Laursen, J

    2006-01-01

    Aeration tank settling is a control method allowing settling in the process tank during high hydraulic load. The control method is patented. Aeration tank settling has been applied in several waste water treatment plants using the present design of the process tanks. Some process tank designs have shown to be more effective than others. To improve the design of less effective plants, computational fluid dynamics (CFD) modelling of hydraulics and sedimentation has been applied. This paper discusses the results at one particular plant experiencing problems with partly short-circuiting of the inlet and outlet causing a disruption of the sludge blanket at the outlet and thereby reducing the retention of sludge in the process tank. The model has allowed us to establish a clear picture of the problems arising at the plant during aeration tank settling. Secondly, several process tank design changes have been suggested and tested by means of computational fluid dynamics modelling. The most promising design changes have been found and reported.

  18. Endotoxin levels in settled airborne dust in European schools : The HITEA school study

    NARCIS (Netherlands)

    Jacobs, J. H.; Krop, E. J M; Borras-Santos, A.; Zock, J. P.; Taubel, M.; Hyvarinnen, A.; Pekkanen, J.; Doekes, G.; Heederik, D. J J

    2014-01-01

    Indoor exposure to microbial agents is known to influence respiratory health. Besides home exposure, exposure in schools can affect respiratory health. In this study, we measured endotoxin in settled dust in primary schools in three European countries from three different geographical regions with

  19. Extended characterization of M-Area settling basin and vicinity. Technical data summary. Revision

    Energy Technology Data Exchange (ETDEWEB)

    Pickett, J B

    1985-10-01

    The Savannah River Plant M-Area settling basin, an unlined surface impoundment, has received process effluents from the M-Area fuel and target fabrication facilities since 1958. The waste effluents have contained metal degreasing agents (chlorinated hydrocarbons), acids, caustics, and heavy metals. Data analyses are provided.

  20. Particle imaging velocimetry experiments and lattice-Boltzmann simulations on a single sphere settling under gravity

    NARCIS (Netherlands)

    Ten Cate, A.; Nieuwstad, C.H.; Derksen, J.J.; Van den Akker, H.E.A.

    2002-01-01

    A comparison is made between experiments and simulations on a single sphere settling in silicon oil in a box. Cross-correlation particle imaging velocimetry measurements were carried out at particle Reynolds numbers ranging from 1.5 to 31.9. The particle Stokes number varied from 0.2 to 4 and at

  1. 3D Numerical Investigation of the Flow Pattern in Settling Basins by SSIIM2 Software

    Directory of Open Access Journals (Sweden)

    Edris Merufinia

    2017-01-01

    Full Text Available Settling basins are considered as a major and important component in conventional water treatment processes. The high cost of constructing these basins accounts for approximately 30% of the total capital investment of water treatment plants. Hence, it is essential to model and optimize their performance beforehand. In settling and sedimentation basins, different areas of flow including secondary and rotational flows occur due to the velocity gradient. Such phenomena cause short paths, increase flow stationary and dead zones, and change the mixing rates of the flow, which collectively prevent laminar conditions to be created for the sedimentation process, and thereby reduce process efficiency. The remedy is to reduce as far as possible the dead zones in the flow. The first step to optimize a settling basin is to calculate accurately the velocity field and the volume of rotation zones. The present study presents the numerical simulation of a flow in a rectangular basin. Continuity and Navier-Stokes equations are solved using finite volume method. A 3D flow simulation is performed using the standard k-ε turbulence model for settling basins with and without baffles. Finally, the numerical results obtained are compared with experimental results reported elsewhere.

  2. Help or hinder? : Journalists affecting the future of female genital mutilation in a patriarchal society

    OpenAIRE

    Hallonsten, Sofia

    2016-01-01

    Is it possible to cover an issue as a journalist to the extent that you are practically a human rights activist, and still contribute to its continuation by unconsciously upholding the values causing the issue? This study asks the question if journalists help or hinder the elimination of female genital mutilation (FGM), and puts forth the thesis that journalists as a collective in fact are affecting the development more negatively through their attitudes than positively through their actions....

  3. Helpful and Hindering Factors in Psychodrama Field Training: A Longitudinal Mixed Methods Study of Student Development

    Directory of Open Access Journals (Sweden)

    Bracha Azoulay

    2018-02-01

    Full Text Available Although the literature indicates that students in mental health professions start to form their professional identity and competence in graduate school, there are few studies on the in-training experience of creative arts therapies students. This mixed methods study examined how five first-year students in a psychodrama master’s degree program in Israel experienced their field training, with the aim of identifying the factors likely to promote or hinder the development of their professional identity and sense of professional ability. Longitudinal data were collected weekly throughout the 20-week field training experience. The students reported qualitatively on helpful and hindering factors and were assessed quantitatively on questionnaires measuring professional identity, perceived demands-abilities fit, client involvement, and therapy session evaluations. A thematic analysis of the students’ reports indicated that a clear and defined setting and structure, observing the instructor as a role model, actively leading parts of the session, and observing fellow students were all helpful factors. The hindering factors included role confusion, issues related to coping with client resistance and disciplinary problems, as well as school end-of-year activities that disrupted the continuity of therapy. The quantitative results indicated that students’ professional identity did not significantly change over the year, whereas a U-shaped curve trajectory characterized the changes in demands-abilities fit and other measures. Students began their field training with an overstated sense of ability that soon declined and later increased. These findings provide indications of which helping and hindering factors should be maximized and minimized, to enhance students’ field training.

  4. Helpful and Hindering Factors in Psychodrama Field Training: A Longitudinal Mixed Methods Study of Student Development.

    Science.gov (United States)

    Azoulay, Bracha; Orkibi, Hod

    2018-01-01

    Although the literature indicates that students in mental health professions start to form their professional identity and competence in graduate school, there are few studies on the in-training experience of creative arts therapies students. This mixed methods study examined how five first-year students in a psychodrama master's degree program in Israel experienced their field training, with the aim of identifying the factors likely to promote or hinder the development of their professional identity and sense of professional ability. Longitudinal data were collected weekly throughout the 20-week field training experience. The students reported qualitatively on helpful and hindering factors and were assessed quantitatively on questionnaires measuring professional identity, perceived demands-abilities fit, client involvement, and therapy session evaluations. A thematic analysis of the students' reports indicated that a clear and defined setting and structure, observing the instructor as a role model, actively leading parts of the session, and observing fellow students were all helpful factors. The hindering factors included role confusion, issues related to coping with client resistance and disciplinary problems, as well as school end-of-year activities that disrupted the continuity of therapy. The quantitative results indicated that students' professional identity did not significantly change over the year, whereas a U-shaped curve trajectory characterized the changes in demands-abilities fit and other measures. Students began their field training with an overstated sense of ability that soon declined and later increased. These findings provide indications of which helping and hindering factors should be maximized and minimized, to enhance students' field training.

  5. Statin Use and Self-Reported Hindering Muscle Complaints in Older Persons: A Population Based Study.

    Directory of Open Access Journals (Sweden)

    Milly A van der Ploeg

    Full Text Available Statins are widely used by older persons in primary and secondary prevention of cardiovascular disease. Although serious adverse events are rare, many statin users report mild muscle pain and/or muscle weakness. It's unclear what impact statins exert on a patient's daily life. Research on statin related side effects in older persons is relatively scarce. We therefore investigated the relation between statin use and self-reported hindering muscle complaints in older persons in the general population.The present research was performed within the Integrated Systematic Care for Older Persons (ISCOPE study in the Netherlands (Netherlands trial register, NTR1946. All registered adults aged ≥ 75 years from 59 participating practices (n = 12,066 were targeted. Information about the medical history and statin use at baseline and after 9 months was available for 4355 participants from the Electronic Patient Records of the general practitioners. In the screening questionnaire at baseline we asked participants: 'At the moment, which health complaints limit you the most in your day-to-day life?' Answers indicating muscle or musculoskeletal complaints were coded as such. No specific questions about muscle complaints were asked.The participants had a median age of 80.3 (IQR 77.6-84.4 years, 60.8% were female and 28.5% had a history of CVD. At baseline 29% used a statin. At follow-up, no difference was found in the prevalence of self-reported hindering muscle complaints in statin users compared to non-statin users (3.3% vs. 2.5%, OR 1.39, 95% CI 0.94-2.05; P = 0.98. Discontinuation of statin use during follow-up was independent of self-reported hindering muscle complaints.Based on the present findings, prevalent statin use in this community-dwelling older population is not associated with self-reported hindering muscle complaints; however, the results might be different for incident users.

  6. Statin Use and Self-Reported Hindering Muscle Complaints in Older Persons: A Population Based Study.

    Science.gov (United States)

    van der Ploeg, Milly A; Poortvliet, Rosalinde K E; van Blijswijk, Sophie C E; den Elzen, Wendy P J; van Peet, Petra G; de Ruijter, Wouter; Blom, Jeanet W; Gussekloo, Jacobijn

    2016-01-01

    Statins are widely used by older persons in primary and secondary prevention of cardiovascular disease. Although serious adverse events are rare, many statin users report mild muscle pain and/or muscle weakness. It's unclear what impact statins exert on a patient's daily life. Research on statin related side effects in older persons is relatively scarce. We therefore investigated the relation between statin use and self-reported hindering muscle complaints in older persons in the general population. The present research was performed within the Integrated Systematic Care for Older Persons (ISCOPE) study in the Netherlands (Netherlands trial register, NTR1946). All registered adults aged ≥ 75 years from 59 participating practices (n = 12,066) were targeted. Information about the medical history and statin use at baseline and after 9 months was available for 4355 participants from the Electronic Patient Records of the general practitioners. In the screening questionnaire at baseline we asked participants: 'At the moment, which health complaints limit you the most in your day-to-day life?' Answers indicating muscle or musculoskeletal complaints were coded as such. No specific questions about muscle complaints were asked. The participants had a median age of 80.3 (IQR 77.6-84.4) years, 60.8% were female and 28.5% had a history of CVD. At baseline 29% used a statin. At follow-up, no difference was found in the prevalence of self-reported hindering muscle complaints in statin users compared to non-statin users (3.3% vs. 2.5%, OR 1.39, 95% CI 0.94-2.05; P = 0.98). Discontinuation of statin use during follow-up was independent of self-reported hindering muscle complaints. Based on the present findings, prevalent statin use in this community-dwelling older population is not associated with self-reported hindering muscle complaints; however, the results might be different for incident users.

  7. Heat-conserving postures hinder escape: a thermoregulation–predation trade-off in wintering birds

    OpenAIRE

    Jennie M. Carr; Steven L. Lima

    2012-01-01

    Wintering birds may conserve body heat by adopting postures with minimal leg exposure or significant ptiloerection. However, maximally heat-conserving postures may hinder a bird's ability to escape attack, leading to a trade-off between predation risk and thermoregulation. Such a trade-off implies that birds should use the most heat-conserving postures only at very cold temperatures. Feeding in a relatively low-risk environment should also facilitate the use of such heat-conserving postures. ...

  8. RHEOLOGY OF SETTLED SOLIDS IN THE SMALL COLUMN ION EXCHANGE PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, M.; Ferguson, C.; Koopman, D.

    2011-01-27

    The Small Column Ion Exchange (SCIX) process is being developed to remove cesium, strontium, and actinides from Savannah River Site (SRS) Liquid Waste using an existing waste tank (i.e., Tank 41H) to house the process. This process adds monosodium titanate (MST) to a waste tank containing salt solution (and entrained sludge solids). While the process is operating, the solid particles will begin to settle at temperatures up to 45 C. Previous testing has shown that sludge-MST slurries that sit for extended periods (i.e., 1-61 days) at elevated temperatures (i.e., 23-80 C) can develop large shear strengths which could make them difficult to resuspend and remove from the tank. The authors are conducting rheological testing of mixtures containing various concentrations of sludge, MST, and crystalline silicotitanate (CST, ground and unground) that have been aged at different times (i.e., 0 to 13 weeks) and isothermally heated to 30, 45, or 60 C. Additional tests are being conducted that will allow the solid particles to settle at 45 C for 6, 12, and 24 months. The objectives of this task are to determine the impact of settling time and temperature on the shear strength, yield stress, and consistency of the slurries and to determine the impact of radiation on slurry rheology. The testing will determine the relative impact of these parameters rather than predict the shear strength, yield stress, and consistency as a function of feed and operating conditions. This document describes the rheology of slurries containing MST and simulated sludge that sat at elevated temperatures (i.e., up to 60 C) for up to 13 weeks. Rheology of CST-containing slurries, as well as results of the long term settling (6, 12, and 24 months) and irradiation tests (10 and 100 MRad), will be reported later. The conclusions from this analysis follow: (1) MST only slurries that sat at elevated temperatures had larger shear strength, yield stress, and consistency than MST plus sludge slurries that

  9. Rheology Of Settled Solids In The Small Column Ion Exchange Process

    International Nuclear Information System (INIS)

    Poirier, M.; Ferguson, C.; Koopman, D.

    2011-01-01

    The Small Column Ion Exchange (SCIX) process is being developed to remove cesium, strontium, and actinides from Savannah River Site (SRS) Liquid Waste using an existing waste tank (i.e., Tank 41H) to house the process. This process adds monosodium titanate (MST) to a waste tank containing salt solution (and entrained sludge solids). While the process is operating, the solid particles will begin to settle at temperatures up to 45 C. Previous testing has shown that sludge-MST slurries that sit for extended periods (i.e., 1-61 days) at elevated temperatures (i.e., 23-80 C) can develop large shear strengths which could make them difficult to resuspend and remove from the tank. The authors are conducting rheological testing of mixtures containing various concentrations of sludge, MST, and crystalline silicotitanate (CST, ground and unground) that have been aged at different times (i.e., 0 to 13 weeks) and isothermally heated to 30, 45, or 60 C. Additional tests are being conducted that will allow the solid particles to settle at 45 C for 6, 12, and 24 months. The objectives of this task are to determine the impact of settling time and temperature on the shear strength, yield stress, and consistency of the slurries and to determine the impact of radiation on slurry rheology. The testing will determine the relative impact of these parameters rather than predict the shear strength, yield stress, and consistency as a function of feed and operating conditions. This document describes the rheology of slurries containing MST and simulated sludge that sat at elevated temperatures (i.e., up to 60 C) for up to 13 weeks. Rheology of CST-containing slurries, as well as results of the long term settling (6, 12, and 24 months) and irradiation tests (10 and 100 MRad), will be reported later. The conclusions from this analysis follow: (1) MST only slurries that sat at elevated temperatures had larger shear strength, yield stress, and consistency than MST plus sludge slurries that

  10. What hinders implementation of the WHO FCTC Article 5.3? - The case of South Korea.

    Science.gov (United States)

    Lee, Sungkyu

    2016-10-01

    The aims of this study are to identify what hinders implementation of the WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 in Korea, and to provide suggestions for the implementation of Article 5.3. Official governmental documents on tobacco control were reviewed. We also searched news articles for data triangulation. There were three factors that hindered the implementation of Article 5.3 in Korea. Firstly, there has been legal conflict between two tobacco-related laws, one of which is designed to promote the tobacco industry. The other is designed to promote public health. Secondly, the government has had economic interests in the tobacco industry, and its lack of action to effectively regulate the tobacco industry's corporate social responsibility (CSR) practices has hindered the implementation of Article 5.3. Thirdly, the tobacco industry's lobby and active interference in the policy-making process has been a barrier. To fully implement Article 5.3, this study suggests: defusing legal conflict between tobacco-related laws; not considering tobacco industry as a stakeholder; regulating tobacco industry's CSR activities; raising awareness of tobacco industry interference; securing transparency between the government and tobacco industry; and establishing a core group or a committee under the government to implement Article 5.3.

  11. Factors that promote or hinder young disabled people in work participation: a systematic review.

    Science.gov (United States)

    Achterberg, T J; Wind, H; de Boer, A G E M; Frings-Dresen, M H W

    2009-06-01

    The aim of this systematic review was to study factors which promote or hinder young disabled people entering the labor market. We systematically searched PubMed (by means of MESH and text words), EMBASE, PsycINFO, Web of Science and CINAHL for studies regarding (1) disabled patients diagnosed before the age of 18 years and (2) factors of work participation. Out of 1,268 retrieved studies and 28 extended studies from references and four from experts, ten articles were included. Promoting factors are male gender, high educational level, age at survey, low depression scores, high dispositional optimism and high psychosocial functioning. Female and low educational level gives high odds of unemployment just like low IQ, inpatient treatment during follow up, epilepsy, motor impairment, wheelchair dependency, functional limitations, co-morbidity, physical disability and chronic health conditions combined with mental retardation. High dose cranial radiotherapy, type of cancer, and age of diagnosis also interfered with employment. Of the promoting factors, education appeared to be important, and several physical obstructions were found to be hindering factors. The last mentioned factors can be influenced in contrast to for instance age and gender. However, to optimize work participation of this group of young disabled it is important to know the promoting or hindering influence for employment.

  12. Colloidal stability of suspended and agglomerate structures of settled carbon nanotubes in different aqueous matrices.

    Science.gov (United States)

    Schwyzer, Irène; Kaegi, Ralf; Sigg, Laura; Nowack, Bernd

    2013-08-01

    Carbon nanotubes (CNTs) are often processed in suspended form and therefore a release of CNT-suspensions into the aquatic environment is plausible. In this study, the behaviour of two physico-chemically very different CNT types in the presence of varying, environmentally relevant calcium-containing media was investigated, including the long-term colloidal stability and the sedimentary structures of settled CNTs. Calcium induced CNT flocculation, however, the stability of the CNTs in the medium did not monotonously decrease with increasing calcium concentration. At intermediate calcium concentrations (0.5-1.5 mM Ca) pre-dispersed CNTs were stabilized in humic acid medium to similar, temporarily even to higher degree than in the absence of calcium. Between pH 5 and 8 only at the highest pH an influence on CNT stability was observed by either promoting flocculation or stabilisation depending on the CNT type. Humic acid stabilized CNTs much better than fulvic acid. Generally, the colloidal stability of the long, thick CNTs with higher surface oxygen content was less affected by the media composition. An investigation of the settled CNT material using analytical electron microscopy revealed the presence of spheroidal, bundle-like and net like CNT-agglomerate structures. Calcium possibly acted as bridging agent linking CNTs in a network like manner, temporarily increasing the CNT concentrations stabilized in the supernatants due to the low density of these structures. With increasing settling time the CNTs formed a fluffy sediment layer at the bottom of the reaction vessels. Bundle-like CNT agglomerates were also observed within that layer of settled CNTs, possibly caused by calcium neutralizing the surface charges. Furthermore, the CNT suspensions contained spheroidal CNT agglomerates, most likely residues from the original dry powder that were not disaggregated. The analysis of settled CNT material is a novelty and illustrates CNT agglomerate structures possibly

  13. Resuspension and settling of helminth eggs in water: Interactions with cohesive sediments.

    Science.gov (United States)

    Sengupta, Mita E; Andersen, Thorbjørn J; Dalsgaard, Anders; Olsen, Annette; Thamsborg, Stig M

    2012-08-01

    Helminth parasite eggs in low quality water represent main food safety and health hazards and are therefore important indicators used to determine whether such water can be used for irrigation. Through sedimentation helminth eggs accumulate in the sediment, however resuspension of deposited helminth eggs will lead to increased concentration of suspended eggs in the water. Our study aimed to determine the erodibility (erosion rate and erosion threshold) and settling velocity of Ascaris and Trichuris eggs as well as cohesive sediment at different time points after incorporation into the sediment. Cohesive sediment collected from a freshwater stream was used to prepare a sediment bed onto which helminth eggs were allowed to settle. The erodibility of both sediment and helminth eggs was found to decrease over time indicating that the eggs were incorporated into the surface material of the bed and that this material was stabilized through time. This interaction between eggs and bulk sediment was further manifested in an increased settling velocity of suspended eggs when sediment was present in the suspension as compared to a situation with settling in clean water. The incorporation into the sediment bed and the aggregation with sediment particles decrease the mobility of both helminth egg types. Our findings document that helminth eggs should not be viewed as single entities in water systems when modelling the distribution of eggs since both erodibility and settling velocity of eggs are determined by mobility of the sediment present in the water stream. Recalculation of the erosion threshold for helminth eggs and sediment showed that even at relatively low current velocities i.e. 0.07-0.12ms(-1) newly deposited eggs will be mobile in open irrigation channels. These environmental factors affecting resuspension must be taken into account when developing models for sedimentation of helminth eggs in different water systems. Copyright © 2012 Elsevier Ltd. All rights

  14. Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions

    DEFF Research Database (Denmark)

    Ramin, Elham; Sin, Gürkan; Mikkelsen, Peter Steen

    2014-01-01

    Current research focuses on predicting and mitigating the impacts of high hydraulic loadings on centralized wastewater treatment plants (WWTPs) under wet-weather conditions. The maximum permissible inflow to WWTPs depends not only on the settleability of activated sludge in secondary settling tanks...... (SSTs) but also on the hydraulic behaviour of SSTs. The present study investigates the impacts of ideal and non-ideal flow (dry and wet weather) and settling (good settling and bulking) boundary conditions on the sensitivity of WWTP model outputs to uncertainties intrinsic to the one-dimensional (1-D...... of settling parameters to the total variance of the key WWTP process outputs significantly depends on the influent flow and settling conditions. The magnitude of the impact is found to vary, depending on which type of 1-D SST model is used. Therefore, we identify and recommend potential parameter subsets...

  15. Exploring bikeability in a metropolitan setting: stimulating and hindering factors in commuting route environments

    Directory of Open Access Journals (Sweden)

    Wahlgren Lina

    2012-03-01

    Full Text Available Abstract Background Route environments may influence people's active commuting positively and thereby contribute to public health. Assessments of route environments are, however, needed in order to better understand the possible relationship between active commuting and the route environment. The aim of this study was, therefore, to assess the potential associations between perceptions of whether the route environment on the whole hinders or stimulates bicycle commuting and perceptions of environmental factors. Methods The Active Commuting Route Environment Scale (ACRES was used for the assessment of bicycle commuters' perceptions of their route environments in the inner urban parts of Greater Stockholm, Sweden. Bicycle commuters (n = 827 were recruited by advertisements in newspapers. Simultaneous multiple regression analyses were used to assess the relation between predictor variables (such as levels of exhaust fumes, noise, traffic speed, traffic congestion and greenery and the outcome variable (hindering - stimulating route environments. Two models were run, (Model 1 without and (Model 2 with the item traffic: unsafe or safe included as a predictor. Results Overall, about 40% of the variance of hindering - stimulating route environments was explained by the environmental predictors in our models (Model 1, R2 = 0.415, and Model 2, R 2= 0.435. The regression equation for Model 1 was: y = 8.53 + 0.33 ugly or beautiful + 0.14 greenery + (-0.14 course of the route + (-0.13 exhaust fumes + (-0.09 congestion: all types of vehicles (p ≤ 0.019. The regression equation for Model 2 was y = 6.55 + 0.31 ugly or beautiful + 0.16 traffic: unsafe or safe + (-0.13 exhaust fumes + 0.12 greenery + (-0.12 course of the route (p ≤ 0.001. Conclusions The main results indicate that beautiful, green and safe route environments seem to be, independently of each other, stimulating factors for bicycle commuting in inner urban areas. On the other hand, exhaust

  16. Trichothecene mycotoxins and their determinants in settled dust related to grain production.

    Science.gov (United States)

    Nordby, Karl-Christian; Halstensen, Anne Straumfors; Elen, Oleif; Clasen, Per-Erik; Langseth, Wenche; Kristensen, Petter; Eduard, Wijnand

    2004-01-01

    We hypothesise that inhalant exposure to mycotoxins causes developmental outcomes and certain hormone-related cancers that are associated with grain farming in an epidemiological study. The aim of the present study was to identify and validate determinants of measured trichothecene mycotoxins in grain dust as work environmental trichothecene exposure indicators. Settled grain dust was collected in 92 Norwegian farms during seasons of 1999 and 2000. Production characteristics and climatic data were studied as determinants of trichothecenes in settled dust samples obtained during the production of barley (N = 59), oats (N = 32), and spring wheat (N = 13). Median concentrations of trichothecenes in grain dust were grain dust in this study. Differences in cereal species, production properties and districts contributed less to explain mycotoxin concentrations. Fungal forecasts are validated as indicators of mycotoxin exposure of grain farmers and their use in epidemiological studies may be warranted.

  17. Characteristics and settling behaviour of particles from blast furnace flue gas washing.

    Science.gov (United States)

    Kiventerä, Jenni; Leiviskä, Tiina; Keski-Ruismäki, Kirsi; Tanskanen, Juha

    2016-05-01

    A lot of particles from iron-making are removed with blast furnace off-gas and routed to the gas cleaning system. As water is used for cleaning the gas, the produced wash water contains a large amount of particles such as valuable Fe and C. However, the presence of zinc prevents recycling. In addition, the high amount of calcium results in uncontrolled scaling. Therefore, the properties of the wash water from scrubber and sludge, from the Finnish metal industry (SSAB Raahe), were evaluated in this study. Size fractionation of wash water revealed that Fe, Zn, Al, Mn, V, Cr and Cd appeared mainly in the larger fractions (>1.2 μm) and Na, Mg, Si, Ni, K, Cu and As appeared mainly in the smaller fractions (<1.2 μm) or in dissolved form. Calcium was found both in the larger fractions and dissolved (∼60 mg/L). Most of the particles in wash water were included in the 1.2-10 μm particle size and were settled effectively. However, a clear benefit was observed when using a chemical to enhance particle settling. In comparison to 2.5 h of settling without chemical, the turbidity was further decreased by about 94%, iron 85% and zinc 50%. Coagulation-flocculation experiments indicated that both low and high molecular weight cationic polymers could provide excellent purification results in terms of turbidity. Calcium should be removed by other methods. The particles in sludge were mostly in the 2-4 μm or 10-20 μm fractions. Further sludge settling resulted in high solids removal. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Characterization and radionuclides sorption of suspended particulate matters in freshwater according to their settling kinetics

    International Nuclear Information System (INIS)

    Brach-Papa, C.; Boyer, P.; Amielh, M.; Anselmet, F.

    2004-01-01

    In freshwater, the transfers of radionuclides depend both on exchanges between liquid and solid phases and on mass transfers between suspended matter and bottom sediment. Whereas the former ones depend on chemical processes (such as sorption/desorption, complexation, the latter ones are regulated by hydrological and sedimentary considerations (dispersion, erosion, deposit closely related to the interactions between flow, suspended matter and bed sediment. Some of our previous studies highlight the need to consider the matter heterogeneity and its specific sediment dynamics to correctly report the inhomogeneity of fluxes in time and in space. These considerations lead us to develop experimental methods to distinguish the different matter classes, present in natural water, mainly according to their erosion threshold and settling kinetics. In this context, this paper presents the experimental protocol TALISMEN to characterize a natural bulk suspension according the identification of its main settling kinetics groups. In a first step, this identification is achieved by the use of a settling tank, that allows the monitoring of the suspended solid concentration at various depths, combined to a vertical mono-dimensional settling model applying a multi-class approach. In a second step, the particle groups are isolated and their physico-chemical properties are determined ( i.e mineral composition, specific surface area, particulate organic carbon, in order to fully characterized them. In a last one, the sorption property of each group toward radionuclides is determined by the measurements of its distribution coefficients (Kd). The results confirm the interest to consider these heterogeneities for the modelling of the radionuclides transfer in freshwater. From one group to other, these heterogeneities appear at two levels: 1) their sediment dynamics and 2) their radionuclides sorption properties. These conclusions can be equally applying to others xenobiotics as heavy metals

  19. Tank 21 and Tank 24 Blend and Feed Study: Blending Times, Settling Times, and Transfers

    International Nuclear Information System (INIS)

    Lee, S.; Leishear, R.; Poirier, M.

    2012-01-01

    The Salt Disposition Integration (SDI) portfolio of projects provides the infrastructure within existing Liquid Waste facilities to support the startup and long term operation of the Salt Waste Processing Facility (SWPF). Within SDI, the Blend and Feed Project will equip existing waste tanks in the Tank Farms to serve as Blend Tanks where salt solutions of up to 1.2 million gallons will be blended in 1.3 million gallon tanks and qualified for use as feedstock for SWPF. In particular, Tanks 21 and 24 are planned to be used for blending and transferring to the SDI feed tank. These tanks were evaluated here to determine blending times, to determine a range of settling times for disturbed sludge, and to determine that the SWPF Waste Acceptance Criteria that less than 1200 mg/liter of solids will be entrained in salt solutions during transfers from the Tank 21 and Tank 24 will be met. Overall conclusions for Tank 21 and Tank 24 operations include: (1) Experimental correction factors were applied to CFD (computational fluid dynamics) models to establish blending times between approximately two and five hours. As shown in Phase 2 research, blending times may be as much as ten times greater, or more, if lighter fluids are added to heavier fluids (i.e., water added to salt solution). As the densities of two salt solutions converge this effect may be minimized, but additional confirmatory research was not performed. (2) At the current sludge levels and the presently planned operating heights of the transfer pumps, solids entrainment will be less than 1200 mg/liter, assuming a conservative, slow settling sludge simulant. (3) Based on theoretical calculations, particles in the density range of 2.5 to 5.0 g/mL must be greater than 2-4 (micro)m in diameter to ensure they settle adequately in 30-60 days to meet the SWPF feed criterion ( 60 days) settling times in Tank 21.

  20. Effects of Turbulence on Settling Velocities of Synthetic and Natural Particles

    Science.gov (United States)

    Jacobs, C.; Jendrassak, M.; Gurka, R.; Hackett, E. E.

    2014-12-01

    For large-scale sediment transport predictions, an important parameter is the settling or terminal velocity of particles because it plays a key role in determining the concentration of sediment particles within the water column as well as the deposition rate of particles onto the seabed. The settling velocity of particles is influenced by the fluid dynamic environment as well as attributes of the particle, such as its size, shape, and density. This laboratory study examines the effects of turbulence, generated by an oscillating grid, on both synthetic and natural particles for a range of flow conditions. Because synthetic particles are spherical, they serve as a reference for the natural particles that are irregular in shape. Particle image velocimetry (PIV) and high-speed imaging systems were used simultaneously to study the interaction between the fluid mechanics and sediment particles' dynamics in a tank. The particles' dynamics were analyzed using a custom two-dimensional tracking algorithm used to obtain distributions of the particle's velocity and acceleration. Turbulence properties, such as root-mean-square turbulent velocity and vorticity, were calculated from the PIV data. Results are classified by Stokes number, which was based-on the integral scale deduced from the auto-correlation function of velocity. We find particles with large Stokes numbers are unaffected by the turbulence, while particles with small Stokes numbers primarily show an increase in settling velocity in comparison to stagnant flow. The results also show an inverse relationship between Stokes number and standard deviation of the settling velocity. This research enables a better understanding of the interdependence between particles and turbulent flow, which can be used to improve parameterizations in large-scale sediment transport models.

  1. Escherichia coli in settled-dust and air samples collected in residential environments in Mexico City.

    OpenAIRE

    Rosas, I; Salinas, E; Yela, A; Calva, E; Eslava, C; Cravioto, A

    1997-01-01

    Escherichia coli, an important indicator of the presence of fecal material, was isolated from indoor and outdoor environments in Mexico City. The heterogeneity of E. coli was represented by 89 serotypes, most of them coming from settled-dust indoor samples; 21% of them presented antibiotic multiresistance. The numbers of plasmids were higher among the antibiotic-resistant strains. The results of this study suggest that intestinal infections produced by environmental strains could be of more e...

  2. Closure plan for the M-Area settling basin and vicinity at the Savannah River Plant

    International Nuclear Information System (INIS)

    Colven, W.P.; Pickett, J.B.

    1985-07-01

    The areas addressed in this closure plan include a process sewer line, surface impoundment (settling basin), overflow ditch, seepage area, and a Carolina Bay known as Lost Lake. Since it is proposed that the basin and vicinity be closed with the hazardous wastes placed and stabilized in the basin, it will be closed pursuant to regulations for closing a hazardous waste landfill. No free liquids will remain in the impoundment after closure is completed

  3. Settling Payments Fast and Private: Efficient Decentralized Routing for Path-Based Transactions

    OpenAIRE

    Roos, Stefanie; Moreno-Sanchez, Pedro; Kate, Aniket; Goldberg, Ian

    2017-01-01

    Path-based transaction (PBT) networks, which settle payments from one user to another via a path of intermediaries, are a growing area of research. They overcome the scalability and privacy issues in cryptocurrencies like Bitcoin and Ethereum by replacing expensive and slow on-chain blockchain operations with inexpensive and fast off-chain transfers. In the form of credit networks such as Ripple and Stellar, they also enable low-price real-time gross settlements across different currencies. F...

  4. Settling fluxes and ecotoxicological risk assessment of fine sedimentary metals in Tema Harbour (Ghana).

    Science.gov (United States)

    Botwe, Benjamin O; Nyarko, Elvis; Lens, Piet N L

    2018-01-01

    Sediment traps were deployed in the Tema Harbour to estimate the settling fluxes of silt-clay particles and associated metals (Fe, Mn, Pb, Cr, Cu, Zn, Ni, Hg, Sn and As) and characterise their potential ecotoxicological risks. The mean daily settling fluxes of the silt-clay particles and associated metals ranged from 42.7 to 85.0gm -2 d -1 and 1.3×10 -2 to 49.4mgm -2 d -1 , respectively, and were characterised by large fluctuations at each station. The silt-clay and metal fluxes strongly correlated, indicating the important role of the silt-clay particles in metal transport and distribution in the harbour. Geochemical indices indicated anthropogenic influences on the harbour as the Pb, Cr, Zn, Hg, Sn and As content in the settling silt-clay particles exceeded their average crustal concentrations. Sediment quality guidelines indicated these metals pose appreciable ecotoxicological risks, particularly As. Increasing temporal trends in As necessitates increased pollution control efforts at the harbour. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Settling time of dental x-ray tube head after positioning

    International Nuclear Information System (INIS)

    Yun, Suk Ja; Kang, Byung Cheol; Wang, Se Myung; Koh, Chang Sung

    2002-01-01

    The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X-axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 11 seconds for the mobile-types. Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after xray tube head positioning for better radiographic resolution.

  6. Settling time of dental x-ray tube head after positioning

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Suk Ja; Kang, Byung Cheol [Department of Oral and Maxillofacial Radiology, Chonnam National University, Gwangju (Korea, Republic of); Wang, Se Myung; Koh, Chang Sung [Department of Mechatronics, Kwangju Institute of Science and Technology, Gwangju (Korea, Republic of)

    2002-09-15

    The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X-axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 11 seconds for the mobile-types. Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after xray tube head positioning for better radiographic resolution.

  7. Low power fast settling multi-standard current reusing CMOS fractional-N frequency synthesizer

    Institute of Scientific and Technical Information of China (English)

    Lou Wenfeng; Feng Peng; Wang Haiyong; Wu Nanjian

    2012-01-01

    A low power fast settling multi-standard CMOS fractional-N frequency synthesizer is proposed.The current reusing and frequency presetting techniques are adopted to realize the low power fast settling multi-standard fractional-N frequency synthesizer.An auxiliary non-volatile memory (NVM) is embedded to avoid the repetitive calibration process and to save power in practical application.This PLL is implemented in a 0.18μm technology.The frequency range is 0.3 to 2.54 GHz and the settling time is less than 5μs over the entire frequency range.The LC-VCO with the stacked divide-by-2 has a good figure of merit of-193.5 dBc/Hz.The measured phase noise of frequency synthesizer is about -115 dBc/Hz at 1 MHz offset when the carrier frequency is 2.4 GHz and the reference spurs are less than -52 dBc.The whole frequency synthesizer consumes only 4.35 mA @ 1.8 V.

  8. Study of virgin olive oil clarification by settling under dynamic conditions.

    Science.gov (United States)

    Gila, Abraham; Bejaoui, Mohamed Aymen; Beltrán, Gabriel; Aguilera, María Paz; Jiménez, Antonio

    2018-04-16

    Vertical centrifugation is the main method for virgin olive oil (VOO) clarification. However, in recent years, settling tanks are also being used to clarify the oils from decanters. They can operate under static or dynamic conditions. In this work, vertical centrifugation and settling under dynamic conditions for VOO clarification and their effects on VOO characteristics were compared. VOO quality parameters were not affected by the clarification systems studied. The vertical centrifugal separator (VCS) showed higher clarification efficiency, giving clarified oils with higher phenol content and better sensory characteristics. VOOs clarified by dynamic settling showed notable losses of phenols and worse sensory characteristics, since the tank purge system was not efficient, with most of the impurities remaining in the tanks. The VCS with minimal water addition is a quick operation with low water consumption and is a better option to produce VOOs of improved quality, especially in terms of longer shelf life and preservation of positive sensory notes. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  9. Low power fast settling multi-standard current reusing CMOS fractional-N frequency synthesizer

    International Nuclear Information System (INIS)

    Lou Wenfeng; Feng Peng; Wang Haiyong; Wu Nanjian

    2012-01-01

    A low power fast settling multi-standard CMOS fractional-N frequency synthesizer is proposed. The current reusing and frequency presetting techniques are adopted to realize the low power fast settling multi-standard fractional-N frequency synthesizer. An auxiliary non-volatile memory (NVM) is embedded to avoid the repetitive calibration process and to save power in practical application. This PLL is implemented in a 0.18 μm technology. The frequency range is 0.3 to 2.54 GHz and the settling time is less than 5 μs over the entire frequency range. The LC-VCO with the stacked divide-by-2 has a good figure of merit of −193.5 dBc/Hz. The measured phase noise of frequency synthesizer is about −115 dBc/Hz at 1 MHz offset when the carrier frequency is 2.4 GHz and the reference spurs are less than −52 dBc. The whole frequency synthesizer consumes only 4.35 mA and 1.8 V. (semiconductor integrated circuits)

  10. Data versus Spock: lay theories about whether emotion helps or hinders.

    Science.gov (United States)

    Karnaze, Melissa M; Levine, Linda J

    2018-05-01

    The android Data from Star Trek admired human emotion whereas Spock viewed emotion as irrational and maladaptive. The theory that emotions fulfil adaptive functions is widely accepted in academic psychology but little is known about laypeople's theories. The present study assessed the extent to which laypeople share Data's view of emotion as helpful or Spock's view of emotion as a hindrance. We also assessed how help and hinder theory endorsement were related to reasoning, emotion regulation, and well-being. Undergraduates (N = 630) completed a stressful timed reasoning task and questionnaires that assessed their theories of emotion, emotion regulation strategies, happiness, and social support. Overall, participants viewed emotion more as a help than a hindrance. The more they endorsed the view that emotion helps, the better their reasoning scores. Endorsing a help theory also predicted the use of reappraisal which, in turn, predicted greater happiness and social support. In contrast, endorsing the view that emotion hinders was associated with emotion suppression and less social support. Thus, people's theories about the functionality of emotion may have important implications for their reasoning and emotional well-being.

  11. Factors hindering clinical training of students in selected nursing educational institutions in Southeastern Nigeria.

    Science.gov (United States)

    Anarado, Agnes N; Agu, Grace U; Nwonu, Eunice I

    2016-05-01

    Clinical training is an integral part of professional nursing education as it equips students with the required knowledge, skills, attitudes, and values needed for optimal practice in real-life situations. Inappropriate professional attributes have been observed among nursing graduates, while challenges to acquisition of clinical skills have been understudied in Nigeria. This study investigated system factors related to the provision of infrastructure/equipment, training/supervisory activities, and students' factors that may hinder clinical training of nursing students in two selected institutions in Southeastern Nigeria. This cross-sectional descriptive study purposively enlisted 283 students from a diploma and a degree nursing education program. Data were collected with researchers' developed questionnaire and analyzed in percentages, and means, with a mean decision criterion of valueprogram students had significantly less opportunity for return demonstration under supervision and independent practice in the laboratory; the diploma program students had significantly fewer teachers in their school and patients in their clinical area, clinical nurses as role models were not following the standard procedures in practice and students were not evaluated by supervisors at the end of each clinical experience. Identified factors in these training environments could hinder learners' interest and acquisition of professional attributes. Rectifying these situations could enhance the acquisition and display of appropriate professional performance behavior in practice by nursing graduates. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Fragmentation approach to the point-island model with hindered aggregation: Accessing the barrier energy

    Science.gov (United States)

    González, Diego Luis; Pimpinelli, Alberto; Einstein, T. L.

    2017-07-01

    We study the effect of hindered aggregation on the island formation process in a one- (1D) and two-dimensional (2D) point-island model for epitaxial growth with arbitrary critical nucleus size i . In our model, the attachment of monomers to preexisting islands is hindered by an additional attachment barrier, characterized by length la. For la=0 the islands behave as perfect sinks while for la→∞ they behave as reflecting boundaries. For intermediate values of la, the system exhibits a crossover between two different kinds of processes, diffusion-limited aggregation and attachment-limited aggregation. We calculate the growth exponents of the density of islands and monomers for the low coverage and aggregation regimes. The capture-zone (CZ) distributions are also calculated for different values of i and la. In order to obtain a good spatial description of the nucleation process, we propose a fragmentation model, which is based on an approximate description of nucleation inside of the gaps for 1D and the CZs for 2D. In both cases, the nucleation is described by using two different physically rooted probabilities, which are related with the microscopic parameters of the model (i and la). We test our analytical model with extensive numerical simulations and previously established results. The proposed model describes excellently the statistical behavior of the system for arbitrary values of la and i =1 , 2, and 3.

  13. Size matters for violent discharge height and settling speed of Sphagnum spores: important attributes for dispersal potential.

    Science.gov (United States)

    Sundberg, Sebastian

    2010-02-01

    Initial release height and settling speed of diaspores are biologically controlled components which are key to modelling wind dispersal. Most Sphagnum (peat moss) species have explosive spore liberation. In this study, how capsule and spore sizes affect the height to which spores are propelled were measured, and how spore size and spore number of discharged particles relate to settling speed in the aspherical Sphagnum spores. Spore discharge and spore cloud development were filmed in a closed chamber (nine species). Measurements were taken from snapshots at three stages of cloud development. Settling speed of spores (14 species) and clusters were timed in a glass tube. The maximum discharge speed measured was 3.6 m s(-1). Spores reached a maximum height of 20 cm (average: 15 cm) above the capsule. The cloud dimensions at all stages were related positively to capsule size (R(2) = 0.58-0.65). Thus species with large shoots (because they have large capsules) have a dispersal advantage. Half of the spores were released as singles and the rest as clusters (usually two to four spores). Single spores settled at 0.84-1.86 cm s(-1), about 52 % slower than expected for spherical spores with the same diameters. Settling speed displayed a positive curvilinear relationship with spore size, close to predictions by Stokes' law for spherical spores with 68 % of the actual diameters. Light-coloured spores settled slower than dark spores. Settling speed of spore clusters agrees with earlier studies. Effective spore discharge and small, slowly settling spores appear particularly important for species in forested habitats. The spore discharge heights in Sphagnum are among the greatest for small, wind-dispersed propagules. The discharge heights and the slow settling of spores affect dispersal distances positively and may help to explain the wide distribution of most boreal Sphagnum species.

  14. TANK 21 AND TANK 24 BLEND AND FEED STUDY: BLENDING TIMES, SETTLING TIMES, AND TRANSFERS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.; Leishear, R.; Poirier, M.

    2012-05-31

    The Salt Disposition Integration (SDI) portfolio of projects provides the infrastructure within existing Liquid Waste facilities to support the startup and long term operation of the Salt Waste Processing Facility (SWPF). Within SDI, the Blend and Feed Project will equip existing waste tanks in the Tank Farms to serve as Blend Tanks where salt solutions of up to 1.2 million gallons will be blended in 1.3 million gallon tanks and qualified for use as feedstock for SWPF. In particular, Tanks 21 and 24 are planned to be used for blending and transferring to the SDI feed tank. These tanks were evaluated here to determine blending times, to determine a range of settling times for disturbed sludge, and to determine that the SWPF Waste Acceptance Criteria that less than 1200 mg/liter of solids will be entrained in salt solutions during transfers from the Tank 21 and Tank 24 will be met. Overall conclusions for Tank 21 and Tank 24 operations include: (1) Experimental correction factors were applied to CFD (computational fluid dynamics) models to establish blending times between approximately two and five hours. As shown in Phase 2 research, blending times may be as much as ten times greater, or more, if lighter fluids are added to heavier fluids (i.e., water added to salt solution). As the densities of two salt solutions converge this effect may be minimized, but additional confirmatory research was not performed. (2) At the current sludge levels and the presently planned operating heights of the transfer pumps, solids entrainment will be less than 1200 mg/liter, assuming a conservative, slow settling sludge simulant. (3) Based on theoretical calculations, particles in the density range of 2.5 to 5.0 g/mL must be greater than 2-4 {micro}m in diameter to ensure they settle adequately in 30-60 days to meet the SWPF feed criterion (<1200 mg/l). (4) Experimental tests with sludge batch 6 simulant and field turbidity data from a recent Tank 21 mixing evolution suggest the solid

  15. Characterization and modeling of sediment settling, consolidation, and suspension to optimize coastal Louisiana restoration

    Science.gov (United States)

    Sha, X.; Xu, K.; Bentley, S. J.; Robichaux, P. A.

    2018-04-01

    Many research efforts have been undertaken over many decades in the field of Louisiana coastal restoration, but long-term experiments for sediment suspension and consolidation in diversion-receiving basins are still limited, despite significance of this topic to ongoing restoration strategies. Sediment samples were collected from two active diversions on the Mississippi River: West Bay, a semi-enclosed bay located on the Mississippi River Delta and fed by the West Bay Diversion, and from Big Mar pond, a receiving basin of the Caernarvon freshwater diversion from the lower Mississippi River, Louisiana, USA. A dual-core Gust Erosion Microcosm System was used to measure time-series (0.5, 1, 2, 3, 4, 5, and 6-months after initial settling) erodibility at seven shear stress regimes (0.01-0.60 Pa) using experimental cores prepared with two initial sediment concentrations (60 and 120 kg m-3). A 230-cm tall settling column with nine sampling ports was used to measure the consolidation rates for initial sediment concentrations ranging from fluid mud (10 kg m-3) to dredge effluent (120 kg m-3), in combination with two levels of salinity (1 and 5). The erodibility of West Bay sediment decreased with increasing time of consolidation. The critical shear stress for resuspension increased from 0.2 Pa after 2 months to 0.45 Pa after 4 months of consolidation. The consolidation rates were inversely and exponentially related to initial sediment concentrations. Consolidation tests in salinity of 1 generally settled faster than that in salinity of 5, and consolidation tests with low sediment concentration tests generally settled faster than high-concentration tests. An exponential coefficient was added in the Sanford (2008) model to better predict the consolidation profile of both rapid early settling and slow self-weight consolidation processes. Our study suggests that enclosed basin, low salinity, relatively low sediment concentration and minimized disturbance for 4 months all favor

  16. Multi-layer foil web hindering radiation, particularly radioactive radiation. Strahlung, insbesondere radioaktive Strahlung hemmende mehrschichtige Folienbahn

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1987-02-19

    The invention concerns surfaces hindering radiation, which contain lead or other heavy material, which have a layer containing heavy material particles, particularly lead particles, for use as protective clothing.

  17. Studi Numerik Karakterisasi Aliran 3 Dimensi Multifase (Gas-Solid) Pada Gravity Settling Chamber Dengan Variasi Kecepatan Inlet Dan Diameter Partikel Pada Aliran Dilute Phase

    OpenAIRE

    Isa’i, Adi Mochammad; Widodo, Wawan Aries

    2013-01-01

    Kegiatan pemilahan pada aktivitas produksi merupakan salah satu kegiatan yang banyak dilakukan pada dunia industri. Penggunaan gravity settling chamber merupakan teknologi pemilahan partikel yang paling sedehana dan murah. Maka dalam perancangan suatu gravity settling chamber perlu diketahui parameter yang mempengaruhi kinerja dari alat tersebut. Analisa karakteristik aliran pada gravity settling chamber dilakukan dengan metode simulasi numerik menggunakan persamaan Eularian-Lagrangian. Sebu...

  18. Studi Numerik Karakterisasi Aliran 3 Dimensi Multifase (Gas-Solid) Pada Gravity Settling Chamber Dengan Variasi Kecepatan Inlet Dan Diameter Partikel Pada Aliran Dilute Phase

    OpenAIRE

    Adi Mochammad Isa’i; Wawan Aries Widodo

    2013-01-01

    Kegiatan  pemilahan pada aktivitas produksi merupakan salah satu kegiatan yang banyak dilakukan pada dunia industri. Penggunaan gravity settling chamber merupakan teknologi pemilahan partikel yang paling sedehana dan murah. Maka dalam perancangan suatu gravity settling chamber perlu diketahui parameter yang mempengaruhi kinerja dari alat tersebut. Analisa karakteristik aliran pada gravity settling chamber dilakukan dengan metode simulasi numerik menggunakan persamaan Eularian-Lagrangian. Sebu...

  19. Larvae of the Commercial Tropical Oyster Crassostrea belcheri (Sowerby) are induced to settle by Pheromones from the Adults

    DEFF Research Database (Denmark)

    Bussarawit, Somchai; Cedhagen, Tomas

    2012-01-01

    Pediveliger larvae of the commercial tropical oyster Crassostrea belcheri were allowed to settle under different conditions. Two types of seawater were used for the experiments: aged seawater (1 month) and aged seawater conditioned by the presence of adult oysters for 24 hours. Two groups of five...... other species within the same genus or from a different genus. Settling frequency was increased by the presence of living oysters together with soaked spatfall collectors in commercial aquaculture. The fact that larvae are induced to settle by pheromones released from the adults is an important...... mechanism that favours the gregariousness of the oysters in nature. Settling behaviour of oyster larvae was observed and the behaviour of the three main stages was described: free swimming searching stage, crawling stage and cementing stage....

  20. Monitoring and troubleshooting of non-filamentous settling and dewatering problems in an industrial activated sludge treatment plant

    DEFF Research Database (Denmark)

    Kjellerup, B. V.; Keiding, Kristian; Nielsen, Per Halkjær

    2001-01-01

    dewaterability. The monitoring program revealed that a deterioration of the floc strength and the settling properties in the process tanks was closely connected to downstream dewatering problems and poor effluent quality. Particularly severe problems were observed a few weeks after the production at the factory......A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order...... to characterise the changes in floc properties that led to settling and dewatering problems and to find reasons for this taking place, a comprehensive monitoring program was conducted during more than one year. The monitoring program included various measurements of floc settleability, floc strength and sludge...

  1. Nitroxyl free radicals formed from hindered amine light stabilizers under 60Co γ-ray irradiation

    International Nuclear Information System (INIS)

    Wang Huiliang; Chen Wenxiu

    2006-01-01

    Nitroxyl free radicals formed from several low molecular weight (LMW) hindered amine light stabilizers (HALS) under 60 Co γ-ray irradiation was studied with electron spin resonance (ESR) spectroscopy. All the HALSs irradiated in air formed nitroxyl free radicals under irradiation in air. For most of the HALSs, concentration of the nitroxyl free radicals increased linearly and quickly with absorbed dose in 0-10 kGy range, but increased slowly, or even kept constant, with doses of greater than 10 kGy. Concentration of nitroxyl free radicals formed from LMW HALS was usually higher than high molecular weight HALS. Tetramethyl HALS was easier to form nitroxyl free radicals than pentamethyl HLAS. Concentration of nitroxyl free radicals formed from the samples irradiated in oxygen was about two times higher than that the samples irradiated in air. Mechanisms of the nitroxyl free radical formation from the γ-ray irradiated HALSs were was discussed. (authors)

  2. What Hinders the Implementation of the Supply Chain Risk Management Process Into Practice Organizations?

    DEFF Research Database (Denmark)

    Gredal, Pauline; Panyi, Zsófia; Kinra, Aseem

    2017-01-01

    Supply chain risk management process (SCRMP) is being advanced as a systematic and structured approach for identifying, assessing, mitigating, and monitoring all risks arising from complex supply chains. However, while the literature deems it necessary to implement such a process as the solution ...... indicate that the unavailability of information and lack of proper data management hinders the implementation of SCRMP in the context global supply chains.......Supply chain risk management process (SCRMP) is being advanced as a systematic and structured approach for identifying, assessing, mitigating, and monitoring all risks arising from complex supply chains. However, while the literature deems it necessary to implement such a process as the solution...... to the increasing vulnerability companies face, there is a lack of empirical evidence on whether the process model can be implemented. This paper shows possible hindrances in the implementation of SCRMP for companies with global supply chains based on the findings of an in-depth case study. Our empirical findings...

  3. In vitro circumvention of cisplatin resistance by the novel sterically hindered platinum complex AMD473.

    Science.gov (United States)

    Holford, J.; Sharp, S. Y.; Murrer, B. A.; Abrams, M.; Kelland, L. R.

    1998-01-01

    A novel sterically hindered platinum complex, AMD473 [cis-aminedichloro(2-methylpyridine) platinum (II)], has been selected for phase I clinical trials due to commence in 1997. AMD473 was rationally designed to react preferentially with nucleic acids over sulphur ligands such as glutathione. This report documents the in vitro circumvention of acquired cisplatin resistance mechanisms in human ovarian carcinoma (HOC) cell lines by AMD473. In a panel of 11 HOC cell lines, AMD473 showed intermediate growth inhibition potency (mean IC50 of 8.1 microM) in comparison to cisplatin (mean IC50 of 2.6 microM) and carboplatin (mean IC50 of 20.3 microM). AMD473 showed only a 30.7-fold increase in IC50 value from the most sensitive to the most resistant HOC cell line, whereas for cisplatin it was 117.9-fold and for carboplatin 119.7-fold. AMD473 also showed significantly (P or = 14 h for AMD473) after equitoxic doses were exposed to HOC cells for 2 h. AMD473 ICLs in the CH1 HOC cell line were slowly formed and showed no visible signs of being repaired 24 h after removal of drug. This was paralleled by a slower, longer lasting induction of p53 protein by equitoxic doses of AMD473 in HOC cell lines with wild-type p53. This new class of sterically hindered platinum compound, selected for clinical trial in 1997, may therefore elicit improved clinical response in intrinsically and acquired cisplatin-resistant tumours in the clinic. Images Figure 9 PMID:9472630

  4. INVESTIGATING DEPRESSION SITUTATION OF THE STUDENTS WHO HAVE SETTLED WITH CENTRAL EXAMINATION SYSTEM AND PRIVATE ABILITY EXAM TO UNIVERSITY

    OpenAIRE

    Ercüment ERDOĞAN, Levent ÖZDEMİR

    2018-01-01

    The most often seen psychological problem is found as a depression in universty students. It causes to lose his fertility, to lose quality of his life. In addition this must be under debate as a public health problem. We aimed in our works to compare depression level of students who are settled in Cumhuriyet University with Central Exam System with students who are settled in Cumhuriyet University with Private Ability Exam. Also we aimed to explain the relation with socio demography depressio...

  5. Influence of sludge properties and hydraulic loading on the performance of secondary settling tanks--full-scale operational results.

    Science.gov (United States)

    Vestner, R J; Günthert, F Wolfgang

    2004-01-01

    Full-scale investigations at a WWTP with a two-stage secondary settling tank process revealed relationships between significant operating parameters and performance in terms of effluent suspended solids concentration. Besides common parameters (e.g. surface overflow rate and sludge volume loading rate) feed SS concentration and flocculation time must be considered. Concentration of the return activated sludge may help to estimate the performance of existing secondary settling tanks.

  6. Factors governing the ability of clean-up plant to remove settling particles from contaminants: theory for stable particles

    International Nuclear Information System (INIS)

    Longworth, J.P.

    1979-11-01

    Consideration is given to the processes by which particles are removed from fluid systems. In particular, it is noted that in tank, as opposed to loop, systems the natural process of gravitational settling competes with engineered removal systems. Calculational methods are given for estimating the relative amounts of settling and removal to clean-up plant for well-mixed fluids, unmixed fluids with horizontal or vertical flow, and turbulent diffusion with incomplete mixing. The criteria for complete mixing are discussed. (author)

  7. Heat exchanger operation in the externally heated air valve engine with separated settling chambers

    International Nuclear Information System (INIS)

    Kazimierski, Zbyszko; Wojewoda, Jerzy

    2014-01-01

    The crucial role in the externally heated air valve engine is played by its heat exchangers which work in a closed cycle. These are: a heater and a cooler and they are subject to a numerical analysis in the paper. Both of them are equipped with fixed volumes that are separate settling chambers causing that heat exchangers behave as almost stationary recuperators and analysis of the stationary behaviour is the main goal of the paper. Power and efficiency of the engine must be not lower than their averaged values for the same engine working in unsteady conditions. The results of calculations confirm such a statement. The pressure drop in the exchanger is another natural phenomenon presented. It has been overcome by use of additional blowers and the use of them is an additional focus of the presented analysis. A separation of settling chambers and additional blowers is a novelty in the paper. There is also a pre-heater applied in the engine which does not differ from well-known heat exchangers met in energy generation devices. The main objective of the paper is to find the behaviour of the engine model under stationary conditions of the heat exchangers and compare it with the non-stationary ones. - Highlights: • Externally heated air engine combined with forced working gas flow (supercharging). • Separate settling chambers allow for achieving stable and constant heat exchange parameters. • Pressure drop in heat exchangers overcome by additional blowers. • Reciprocating piston air engine, cam governing system, standard lubrication for externally heated engine. • Different fuels: oil, coal, gas, biomass also solar or nuclear energy

  8. Effects of rotation on crystal settling in a terrestrial magma ocean: Spherical shell model

    Science.gov (United States)

    Maas, C.; Hansen, U.

    2015-12-01

    Like Moon or Mars, Earth experienced one or several deep magma ocean periods of globalextent in a later stage of its accretion. The crystallization of these magma oceans is of keyimportance for the chemical structure of Earth, the mantle evolution and the onset of platetectonics. Due to the fast rotation of early Earth and the small magma viscosity, rotationprobably had a profound effect on differentiation processes. For example, Matyska et al.[1994] propose that the distribution of heterogeneities like the two large low shear velocityprovinces (LLSVP) at the core mantle boundary is influenced by rotational dynamicsof early Earth. Further Garnero and McNamara [2008] suggest that the LLSVPs arevery long-living anomalies, probably reaching back to the time of differentiation andsolidification of Earth. However, nearly all previous studies neglect the effects of rotation.In our previous work using a Cartesian model, a strong influence of rotation as well asof latitude on the differentiation processes in an early magma ocean was revealed. Weshowed that crystal settling in an early stage of magma ocean crystallization cruciallydepends on latitude as well as on rotational strength and crystal density.In order to overcome the restrictions as to the geometry of the Cartesian model, we arecurrently developing a spherical model to simulate crystal settling in a rotating sphericalshell. This model will allow us not only to investigate crystal settling at the poles andthe equator, but also at latitudes in-between these regions, as well as the migration ofcrystals between poles and equator. ReferencesE. J. Garnero and A. K. McNamara. Structure and dynamics of earth's lower mantle.Science, 320(5876):626-628, 2008.C. Matyska, J. Moser, and D. A. Yuen. The potential influence of radiative heat transferon the formation of megaplumes in the lower mantle. Earth and Planetary ScienceLetters, 125(1):255-266, 1994.

  9. Settling characteristics of nursery pig manure and nutrient estimation by the hydrometer method.

    Science.gov (United States)

    Zhu, Jun; Ndegwa, Pius M; Zhang, Zhijian

    2003-05-01

    The hydrometer method to measure manure specific gravity and subsequently relate it to manure nutrient contents was examined in this study. It was found that this method might be improved in estimation accuracy if only manure from a single growth stage of pigs was used (e.g., nursery pig manure used here). The total solids (TS) content of the test manure was well correlated with the total nitrogen (TN) and total phosphorus (TP) concentrations in the manure, with highly significant correlation coefficients of 0.9944 and 0.9873, respectively. Also observed were good linear correlations between the TN and TP contents and the manure specific gravity (correlation coefficients: 0.9836 and 0.9843, respectively). These correlations were much better than those reported by past researchers, in which lumped data for pigs at different growing stages were used. It may therefore be inferred that developing different linear equations for pigs at different ages should improve the accuracy in manure nutrient estimation using a hydrometer. Also, the error of using the hydrometer method to estimate manure TN and TP was found to increase, from +/- 10% to +/- 50%, with the decrease in TN (from 700 ppm to 100 ppm) and TP (from 130 ppm to 30 ppm) concentrations in the manure. The estimation errors for TN and TP may be larger than 50% if the total solids content is below 0.5%. In addition, the rapid settling of solids has long been considered characteristic of swine manure; however, in this study, the solids settling property appeared to be quite poor for nursery pig manure in that no conspicuous settling occurred after the manure was left statically for 5 hours. This information has not been reported elsewhere in the literature and may need further research to verify.

  10. A consistent modelling methodology for secondary settling tanks in wastewater treatment.

    Science.gov (United States)

    Bürger, Raimund; Diehl, Stefan; Nopens, Ingmar

    2011-03-01

    The aim of this contribution is partly to build consensus on a consistent modelling methodology (CMM) of complex real processes in wastewater treatment by combining classical concepts with results from applied mathematics, and partly to apply it to the clarification-thickening process in the secondary settling tank. In the CMM, the real process should be approximated by a mathematical model (process model; ordinary or partial differential equation (ODE or PDE)), which in turn is approximated by a simulation model (numerical method) implemented on a computer. These steps have often not been carried out in a correct way. The secondary settling tank was chosen as a case since this is one of the most complex processes in a wastewater treatment plant and simulation models developed decades ago have no guarantee of satisfying fundamental mathematical and physical properties. Nevertheless, such methods are still used in commercial tools to date. This particularly becomes of interest as the state-of-the-art practice is moving towards plant-wide modelling. Then all submodels interact and errors propagate through the model and severely hamper any calibration effort and, hence, the predictive purpose of the model. The CMM is described by applying it first to a simple conversion process in the biological reactor yielding an ODE solver, and then to the solid-liquid separation in the secondary settling tank, yielding a PDE solver. Time has come to incorporate established mathematical techniques into environmental engineering, and wastewater treatment modelling in particular, and to use proven reliable and consistent simulation models. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. A comparison of BNR activated sludge systems with membrane and settling tank solid-liquid separation.

    Science.gov (United States)

    Ramphao, M C; Wentzel, M C; Ekama, G A; Alexander, W V

    2006-01-01

    Installing membranes for solid-liquid separation into biological nutrient removal (BNR) activated sludge (AS) systems makes a profound difference not only to the design of the membrane bio-reactor (MBR) BNR system itself, but also to the design approach for the whole wastewater treatment plant (WWTP). In multi-zone BNR systems with membranes in the aerobic reactor and fixed volumes for the anaerobic, anoxic and aerobic zones (i.e. fixed volume fractions), the mass fractions can be controlled (within a range) with the inter-reactor recycle ratios. This zone mass fraction flexibility is a significant advantage of MBR BNR systems over BNR systems with secondary settling tanks (SSTs), because it allows changing the mass fractions to optimise biological N and P removal in conformity with influent wastewater characteristics and the effluent N and P concentrations required. For PWWF/ADWF ratios (fq) in the upper range (fq approximately 2.0), aerobic mass fractions in the lower range (f(maer) settling and long sludge age). However, the volume reduction compared with equivalent BNR systems with SSTs will not be large (40-60%), but the cost of the membranes can be offset against sludge thickening and stabilisation costs. Moving from a flow unbalanced raw wastewater system to a flow balanced (fq = 1) low (usually settled) wastewater strength system can double the ADWF capacity of the biological reactor, but the design approach of the WWTP changes away from extended aeration to include primary sludge stabilisation. The cost of primary sludge treatment then has to be offset against the savings of the increased WWTP capacity.

  12. Synthesis, autoxidation and photooxidation of hindered pyrrole derivatives. Hindered pyrrolic nitroxide radicals; Synthese, autoxydation et photoxidation de pyrroles encombres radicaux nitroxydes pyrroliques encombres

    Energy Technology Data Exchange (ETDEWEB)

    Ramasseul, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    2,5-di-t-butyl and 2,3,5-tri-t-butyl pyrrole are prepared from pinacoline and their structure is confirmed by comparison with 2,5-di-t-butyl furan and thiophene (I.R., U.V. and N.M.R. {sup 13}C satellites observation giving J{sub 13{sub C-H}} and J{sub H{sub 3}-H{sub 4}}). The sensitized photooxidation of these hindered pyrroles gives corresponding hydroperoxides which most likely structure is determined using physical and chemical methods. Oxidation of 2,5-di-t-butyl and 2,3,5-tri-t-butyl pyrrole by hydrogen peroxide in presence of inorganic per-acid of by p-nitro-perbenzoic acid does not give the pyrrolic nitroxides in contrast with secondary amines. Some N-hydroxypyrroles are then prepared from pinacoline and ethyl pivaloyl-acetate. Their oxidation by lead dioxide gives the corresponding pyrrolic nitroxides. 2,5-di-t-butyl 3,4-di-ethoxycarbonyl pyrryl 1-oxy is isolated and studied spectroscopically (visible and U.V., E.P.R.). In marked contrast with ordinary nitroxides it does not show solvent effect. It can be compared with 2,4-di-t-butyl cyclopentadienone, a carbon analog. For both, the long wave length transition does not show the usual n - {pi}* behaviour; that is confirmed by E.P.R. Using Huckel method for pyrrolic nitroxide skeleton, it is possible to have a good interpretation of experimental data. (author) [French] Les di-t-butyl 2,5 et tri-t-butyl-2,3,5 pyrrole sont synthetises a partir de la pinacoline et leur structure confirmee par comparaison avec les di-t-butyl-2,5 furanne et thiophene (I.R., U.V. et R.M.N.: observation des satellites {sup 13}C conduisant a la mesure des J{sub 13{sub C-H}} et J{sub H{sub 3}{sub -H{sub 4}}). La photoxydation sensibilisee de ces pyrroles encombres conduit aux hydroperoxydes correspondants dont la structure la plus probable est determinee par les methodes physicochimiques. L'oxydation des di-t-butyl-2,5 et tri-t-butyl-2,3,5 pyrrole par l'eau oxygenee en presence de peracide mineral ou par l'acide p

  13. The treatment of low level effluents by flocculation and settling at the Chooz nuclear power plant

    International Nuclear Information System (INIS)

    Petteau, J.L.; Roofthooft, R.

    1989-01-01

    At the Chooz plant, radioactive effluents were formerly treated by evaporation, but because throughput was low, another method was studied. After laboratory tests, a 500 L/h flocculation and settling pilot plant was constructed, followed later by a 5 m 3 /h installation. The main isotopes eliminated are caesium-134 and caesium-137. Flocculation with copper ferrocyanide reduces the total activity to less than 500 Bq/L. The installation described in the paper was commissioned in 1984 and has been in industrial operation since 1985, processing all types of effluent. The evaporator can be set aside for boric acid recovery. (author). 3 figs, 1 tab

  14. Novel instrumentation for online monitoring of stationary beds and their height for settling slurries

    CSIR Research Space (South Africa)

    Ilgner, Hartmut J

    2016-06-01

    Full Text Available stream_source_info Ilgner_2016.pdf.txt stream_content_type text/plain stream_size 1057 Content-Encoding UTF-8 stream_name Ilgner_2016.pdf.txt Content-Type text/plain; charset=UTF-8 10th North American Conference... on Multiphase Technology 2016, Banff, Canada 8 – 10 June 2016 Novel instrumentation for online monitoring of stationary beds and their height for settling slurries H J Ilgner ABSTRACT: Novel instrumentation has been developed to detect stationary...

  15. ["The severe degree of negligence" and its application in the settle of medical malpractice].

    Science.gov (United States)

    Wang, You-Min; Zhang, Qin-Chu

    2006-04-01

    To found the quantifiable index of "The severe degree of negligence" in describing the general severity degree of medical malpractice or medical dispute. "The severe degree of negligence" can be calculated by the way of multiplying the coefficient of medical malpractice's grade by the coefficient of responsibility degree. There are 15 grades of "The severe degree of negligence" through calculation, from the severest degree of 1 to the lightest degree of 20. "The severe degree of negligence" can give an order of severe degree to different grade and different responsibility of medical malpractice. According to this order, the operation of medical malpractice and medical dispute settle will be easier and more rationality.

  16. Dispersal of volcaniclasts during deep-sea eruptions: Settling velocities and entrainment in buoyant seawater plumes

    Science.gov (United States)

    Barreyre, Thibaut; Soule, S. Adam; Sohn, Robert A.

    2011-08-01

    We use tank experiments to measure settling rates of deep-sea volcaniclastic material recovered from the Arctic (85°E Gakkel Ridge) and Pacific (Juan de Fuca Ridge, Loihi seamount) Oceans. We find that clast size and shape exert a strong influence on settling velocity, with velocities of ~ 30 cm/s for large (~ 8 mm), blocky clasts, compared to velocities of ~ 2.5 cm/s for small (Pele) entrained in a megaplume could be advected as far as a few kilometers from a source region. These results indicate that entrainment in buoyant seawater plumes during an eruption may play an important role in clast dispersal, but it is not clear if this mechanism can explain the distribution of volcaniclastic material at the sites on the Gakkel and Juan de Fuca Ridges where our samples were acquired. In order to understand the dispersal of volcaniclastic material in the deep-sea it will be necessary to rigorously characterize existing deposits, and develop models capable of incorporating explosive gas phases into the eruption plume.

  17. Behavior of aerosols undergoing Brownian coagulation, Brownian diffusion and gravitational settling in a closed chamber

    International Nuclear Information System (INIS)

    Okuyama, Kikuo; Kousaka, Yasuo; Yoshida, Tetsuo

    1976-01-01

    The behavior of aerosols undergoing Brownian coagulation. Brownian diffusion and gravitational settling in a closed chamber was studied by solving the basic equation, the so-called population balance equation, numerically for a polydisperse aerosol system and analytically for a monodisperse system, and then the results were examined by experiment. In solving the basic equation, two dimensionless parameters, which are determined by the initial properties of an aerosol and the chamber dimension and also characterize the relative effects of Brownian coagulation and Brownian diffusion to gravitational settling, were introduced in order to generalize the behavior under arbitrary conditions. The calculated results, the time-dependent changes in particle number concentration and particle size distribution for a polydisperse system, were presented graphically by using the above two parameters. And further using these parameters, the domains of the three controlling factors were mapped to show the extent of each effect of these factors under various conditions for a monodisperse system. Some of the calculated results were compared with the experimental results obtained by the ultramicroscopic size analysis previously developed by the authors. (auth.)

  18. Respiratory and reproductive characteristics of eastern mosquitofish (Gambusia holbrooki) inhabiting a coal ash settling basin

    Energy Technology Data Exchange (ETDEWEB)

    Staub, B.P.; Hopkins, W.A.; Novak, J.; Congdon, J.D. [University of Georgia, Aiken, SC (United States). Savannah River Ecology Lab.

    2004-01-01

    Coal fly ash and effluent from coal ash settling basins negatively affects metabolism and reproduction in a variety of organisms, including a number of fish species. Some species, most notably the eastern mosquitofish (Gambusia holbrooki), are known to maintain viable populations in areas contaminated by coal ash. While eastern mosquitofish are present in these systems, their degree of tolerance to coal ash has not been investigated using sublethal metrics of exposure. It is possible that eastern mosquitofish persist in habitats affected by coal ash, but experience significant costs such as changes in metabolism and fecundity. Thus, we investigated the effects of coal ash on standard metabolic rate and reproduction of eastern mosquitofish inhabiting a coal-ash contaminated settling basin. Standard metabolic rates of mosquitofish from the ash contaminated site and a reference site were not significantly different. Despite elevated contaminant concentrations in ash basin females (selenium, arsenic, copper, and cadmium) and their offspring (selenium), brood sizes and offspring viability did not differ between clutches collected from ash basin and reference site females. Our data provide further evidence of the high degree of tolerance of eastern mosquitofish to exposure to aquatic coal ash disposal generated by power plants. However, the basis for such tolerance to ash remains unclear. Further investigations are required to determine whether such tolerance is a result of species-specific characteristics or population characteristics due to local adaptation.

  19. Cell structures caused by settling particles in turbulent Rayleigh-Bénard convection

    Science.gov (United States)

    Lee, Changhoon; Park, Sangro

    2016-11-01

    Turbulent thermal convection is an important phenomenon frequently found in nature and industrial processes, often with laden particles. In the last several decades, the vast majority of studies have addressed single phase convective flow with focus on the scaling relation of flow parameters associated with heat transfer. Particle-laden Rayleigh-Bénard convection, however, has not been sufficiently studied. In this study, modulation of cell structures by settling particles in turbulent Rayleigh-Bénard convection in a doubly periodic square channel is investigated using direct numerical simulation with a point particle approach. Flow parameters are fixed at Rayleigh number=106, Prandtl number=0.7, the aspect ratio=6, and Froude number=0.19. We report from the simulations that settling heavy particles modulate irregular large-scale thermal plume structures into organized polygonal cell structures. Different shapes of flow structures are obtained for different particle diameters and mass loadings. We found that polygonal cell structures arise due to asymmetric feedback force exerted by particles onto hot and cold plumes. Increasing the number of particles augments the asymmetry and the polygonal cell structures become smaller, eventually going to the hexagonal structures.

  20. Endotoxins in indoor air and settled dust in primary schools in a subtropical climate.

    Science.gov (United States)

    Salonen, Heidi; Duchaine, Caroline; Létourneau, Valérie; Mazaheri, Mandana; Clifford, Sam; Morawska, Lidia

    2013-09-03

    Endotoxins can significantly affect the air quality in school environments. However, there is currently no reliable method for the measurement of endotoxins, and there is a lack of reference values for endotoxin concentrations to aid in the interpretation of measurement results in school settings. We benchmarked the "baseline" range of endotoxin concentration in indoor air, together with endotoxin load in floor dust, and evaluated the correlation between endotoxin levels in indoor air and settled dust, as well as the effects of temperature and humidity on these levels in subtropical school settings. Bayesian hierarchical modeling indicated that the concentration in indoor air and the load in floor dust were generally (EU/m(3) and EU/m(2), respectively. Exceeding these levels would indicate abnormal sources of endotoxins in the school environment and the need for further investigation. Metaregression indicated no relationship between endotoxin concentration and load, which points to the necessity for measuring endotoxin levels in both the air and settled dust. Temperature increases were associated with lower concentrations in indoor air and higher loads in floor dust. Higher levels of humidity may be associated with lower airborne endotoxin concentrations.

  1. CHEMISTRY OF A PROTOPLANETARY DISK WITH GRAIN SETTLING AND Lyα RADIATION

    International Nuclear Information System (INIS)

    Fogel, Jeffrey K. J.; Bethell, Thomas J.; Bergin, Edwin A.; Calvet, Nuria; Semenov, Dmitry

    2011-01-01

    We present results from a model of the chemical evolution of protoplanetary disks. In our models, we directly calculate the changing propagation and penetration of a high energy radiation field with Lyα radiation included. We also explore the effect on our models of including dust grain settling. We find that, in agreement with earlier studies, the evolution of dust grains plays a large role in determining how deep the UV radiation penetrates into the disk. Significant grain settling at the midplane leads to much smaller freeze-out regions and a correspondingly larger molecular layer, which leads to an increase in column density for molecular species such as CO, CN, and SO. The inclusion of Lyα radiation impacts the disk chemistry through specific species that have large photodissociation cross sections at 1216 A. These include HCN, NH 3 , and CH 4 , for which the column densities are decreased by an order of magnitude or more due to the presence of Lyα radiation in the UV spectrum. A few species, such as CO 2 and SO, are enhanced by the presence of Lyα radiation, but rarely by more than a factor of a few.

  2. In situ holographic measurements of the sizes and settling rates of oceanic particulates

    Science.gov (United States)

    Carder, Kendall L.; Steward, Robert G.; Betzer, Peter R.

    1982-07-01

    A free-floating sediment trap equipped with a holographic particle velocimeter (HPV) was deployed for 14.4 hours at a depth of 30 m in the western North Atlantic Ocean. The system recorded the in situ sizes, shapes, orientations, and settling rates of microscopic particles moving through the laser beam. The primary data reduction revealed particles from the system's lower limit of resolution, 15 micrometers in diameter, to 250 micrometers in diameter with settling velocities ranging from 0.0190 to 0.2302 cm/s (16-198 m/day). Individual particle densities, calculated from a modified Stokes equation, ranged from 1.37 to 5.10 g/ml. The presence of high density particles was independently corroborated through individual particle analysis of the trapped material with a computer-controlled, scanning electron microscope equipped with an energy dispersive X-ray analyzer. In the future, in situ holographic systems might be used to further our understanding of primary productivity, sediment erosion/deposition, and particle aggregation/disruption/dissolution.

  3. Processed kaolin affects the probing and settling behavior of Diaphorina citri (Hemiptera: Lividae).

    Science.gov (United States)

    Miranda, Marcelo P; Zanardi, Odimar Z; Tomaseto, Arthur F; Volpe, Haroldo Xl; Garcia, Rafael B; Prado, Ernesto

    2018-03-05

    Alternative methods that have the potential to reduce the entry of Diaphorina citri Kuwayama (Hemiptera: Liviidae), the major citrus pest worldwide, into commercial groves could be a viable approach for huanglongbing management. Kaolin is an aluminum silicate that when sprayed on plants forms a white particle film that interferes with host recognition by the insects. Diaphorina citri orients towards the host plants by visual and olfactory cues. The purpose of the study was to determine the effect of processed kaolin on D. citri settling (no-choice) and probing behavior [electrical penetration graph (EPG) technique] under laboratory conditions, and to study its host plant finding ability and dispersal under field conditions in the absence and presence of young shoots. Under laboratory conditions, kaolin caused an overall reduction of 40% in the number of psyllids settled on treated seedlings; furthermore, the proportion of individuals that were able to reach the phloem was 50% lower on kaolin-treated plants than on untreated plants. In the field, the plant finding ability of D. citri was disrupted on kaolin-treated trees (overall reduction of 96%), regardless of the vegetative condition, and psyllid dispersal was slower in kaolin-treated plots than in the untreated control. This study clearly demonstrates that processed kaolin interferes negatively with different aspects of the host plant finding ability of D. citri. These findings suggest that processed kaolin has a high potential to reduce huanglongbing primary infection. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  4. Floc Size and Settling Velocity Observations From Three Contrastingly Different Natural Environments in the USA

    Science.gov (United States)

    Manning, Andrew; Schoellhamer, David; Mehta, Ashish; Nover, Daniel; Schladow, Geoffrey

    2010-05-01

    Environmentally, monitoring the movement of suspended cohesive sediments is highly desirable in both estuaries and lakes. When modelling cohesive sediment transport and mass settling fluxes, the settling speed of the suspended matter is a key parameter. In contrast to purely non-cohesive sandy sediments, mud can flocculate and this poses a serious complication to the modelling of sediment pathways. As flocs grow in size they become more porous and significantly less dense, but their settling speeds continue to rise due to a Stokes' Law relationship. Much research has been conducted on the flocculation characteristics of suspended muddy sediments in saline/brackish tidal conditions, where electrostatic particle bonding can occur. However very little is known about freshwater floc dynamics. This is primarily due to flocs being extremely delicate entities and are thus very difficult to observe in situ. This paper primarily describes a recently developed, portable, low intrusive instrument INSSEV_LF, which permits the direct, in situ measurement of both floc size (D) and settling velocity (Ws), simultaneously. Examples of floc spectra observed from three different environments within the USA are presented and compared. The first site was the turbidity maximum zone in San Francisco Bay, where the suspended solids concentration (SSC) was 170 mg.l-1 and many low density macroflocs up to 400 μm in diameter, settling at speeds of 4-8 mm.s-1 were observed. The second location was the shallow (1.7 m mean depth), freshwater environment of Lake Apopka in Florida. It is highly eutrophic, and demonstrates a turbid SSC of 750 mg.l-1 within a benthic suspension layer. These conditions resulted in D from 45 μm up to 1,875 μm; 80% of the floc were > 160 μm (i.e. macroflocs). Present theories for the settling of flocs rely on fractal theory of self-similarity, but this does not appear to be applicable to the Lake Apopka flocs because they do not possess any basic geometric unit

  5. Preschoolers' social and moral judgments of third-party helpers and hinderers align with infants' social evaluations.

    Science.gov (United States)

    Van de Vondervoort, Julia W; Hamlin, J Kiley

    2017-12-01

    Two experiments explored preschoolers' social preferences and moral judgments of prosocial and antisocial others. In Experiment 1, 3- to 5-year-olds (N=74) observed helping and hindering scenarios previously used to explore sociomoral evaluation in preverbal infants. Whereas 3-year-olds in Experiment 1 did not reliably distinguish between the helper and hinderer when reporting social preferences or moral judgments, both 4- and 5-year-olds preferred the helper, judged the helper to be "nicer" than the hinderer, selectively allocated punishment to the hinderer, and were able to justify their punishment allocations. A simplified procedure and the addition of comprehension questions in Experiment 2 (N=24) improved 3-year-olds' performance, suggestive that their performance in Experiment 1 was likely due to processing or memory difficulties rather than an inability to engage in explicit social and moral evaluation. These studies reveal that young children readily interpret helping and hindering scenarios as socially and morally relevant. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Comparing Fear of Death of the Elderly Settled in Elderly’s Home and Inhabited in City Houses of Isfahan

    Directory of Open Access Journals (Sweden)

    Esmat Nouhi

    2014-01-01

    Full Text Available Objectives: On the one hand, increased growth of the elderly population and on the other hand, social– economic changes, personal and family lifestyles have caused an increased number of the elderly protecting centres. The aim of the present survey is to compare the fear of death among the elderly settled in elderly home and inhabited in city houses of Isfahan. Methods & Materials: This study is an analysis – cross sectional study and statistical population are all of the elderly over 60 years inhabited in 14 – fold zones of Isfahan and the ones settled in Sadeghieh elderly home. Participants in this survey were 300 elderly people that 102 people settled in the elderly home (31 males and 71 females and 198 people inhabited in the community (97 males and 101 females. The elderly inhabited in the community were selected through a cluster sampling method and the ones settled in the elderly home through available sampling method and evaluated through a questionnaire of Collett-Lester Fear of Death. In order to analyse collected data, parametric statistical methods of K–Square test and independent–T have been used . Results: The finding of this survey showed that fear of death total score mean was 70.5±15.5 in the elderly group inhabited in houses that significantly was more than that the elderly group settled in the elderly home (P=0.001. Conclusion: The results of this survey showed that fear of death in the elderly group settled in city houses is higher than elderly settled in the elderly’s home. It is necessary that the authorities pay more attention to the sanitary systems in all levels, evaluate the causes and, try to get the aids of the relevant organizations in order to Reduced fear of death of elderly people.

  7. Hinder för utomhusundervisning med fokus på årskurs 4-6

    OpenAIRE

    Petersson, Essi; Carstensen, Linnea

    2018-01-01

    I den här studien har vi tagit fram de hinder som begränsar möjligheterna för utomhusundervisning för elever i grundskolan, med fokus på årskurs 4-6 och middle school. Syftet med studien var att synliggöra vilka hinder som kan stå i vägen för utomhusundervisning samt visa på behov av vidare forskning i området. Forskningsfrågan som vi har försökt svara på är: Vad utgör hinder för utomhusundervisning med elever i grundskolan, med fokus på årskurs 4-6 och middle school? Studien bygger på den pr...

  8. Anomalous diffusion due to hindering by mobile obstacles undergoing Brownian motion or Orstein-Ulhenbeck processes.

    Science.gov (United States)

    Berry, Hugues; Chaté, Hugues

    2014-02-01

    In vivo measurements of the passive movements of biomolecules or vesicles in cells consistently report "anomalous diffusion," where mean-squared displacements scale as a power law of time with exponent αmovement hindrance by obstacles is often invoked. However, our understanding of how hindered diffusion leads to subdiffusion is based on diffusion amidst randomly located immobile obstacles. Here, we have used Monte Carlo simulations to investigate transient subdiffusion due to mobile obstacles with various modes of mobility. Our simulations confirm that the anomalous regimes rapidly disappear when the obstacles move by Brownian motion. By contrast, mobile obstacles with more confined displacements, e.g., Orstein-Ulhenbeck motion, are shown to preserve subdiffusive regimes. The mean-squared displacement of tracked protein displays convincing power laws with anomalous exponent α that varies with the density of Orstein-Ulhenbeck (OU) obstacles or the relaxation time scale of the OU process. In particular, some of the values we observed are significantly below the universal value predicted for immobile obstacles in two dimensions. Therefore, our results show that subdiffusion due to mobile obstacles with OU type of motion may account for the large variation range exhibited by experimental measurements in living cells and may explain that some experimental estimates are below the universal value predicted for immobile obstacles.

  9. Synthesis and characterization of copolymers from hindered amines and vinyl monomers

    Directory of Open Access Journals (Sweden)

    Marcelo Aparecido Chinelatto

    2014-01-01

    Full Text Available New copolymers from hindered amines and vinyl monomers were synthesized by radical chain polymerization. To obtain polymeric HALS, acrylamide-(1ATP and acrylate-(4ATP monomers, derivatives from 2,2,6,6-tetramethylpiperidine and 2,2,6,6-tetramethyl-4-piperidinol were synthesized. The radical chain polymerization of 1ATP with styrene (Sty using 1-butanethiol (BTN resulted in a copolymer with 95 units of Sty and 15 units of 1ATP. The radical chain polymerization of 1ATP and vinyl acetate (VAc has produced only 1ATP homopolymer. In the chain polymerization of 4ATP with Sty or VAc, the hydrogen atom bonded to the nitrogen of 4ATP is labile enough to originate another radical at this site. The steric hindrance imposed by methyl groups on this bonding site hampers its reaction with other propagating species and the formation of a copolymer or network structure will be dependent on the size of the pendent group in the vinyl monomer.

  10. Natural rubber/nitrile butadiene rubber/hindered phenol composites with high-damping properties

    Directory of Open Access Journals (Sweden)

    Xiuying Zhao

    2015-10-01

    Full Text Available New natural rubber (NR/nitrile butadiene rubber (NBR/hindered phenol (AO-80 composites with high-damping properties were prepared in this study. The morphological, structural, and mechanical properties were characterized by atomic force microscopy (AFM, polarized Fourier transform infrared spectrometer (FTIR, dynamic mechanical thermal analyzer (DMTA, and a tensile tester. Each composite consisted of two phases: the NR phase and the NBR/AO-80 phase. There was partial compatibility between the NR phase and the NBR/AO-80 phase, and the NR/NBR/AO-80 (50/50/20 composite exhibited a co-continuous morphology. Strain-induced crystallization occurred in the NR phase at strains higher than 200%, and strain-induced orientation appeared in the NBR/AO-80 phase with the increase of strain from 100% to 500%. The composites had a special stress–strain behavior and mechanical properties because of the simultaneous strain-induced orientation and strain-induced crystallization. In the working temperature range of a seismic isolation bearing, the composites (especially the NR/NBR/AO-80 (50/50/20 composite presented a high loss factor, high area of loss peak (TA, and high hysteresis energy. Therefore, the NR/NBR/AO-80 rubber composites are expected to have important application as a high-performance damping material for rubber bearing.

  11. Local characterization of hindered Brownian motion by using digital video microscopy and 3D particle tracking

    Energy Technology Data Exchange (ETDEWEB)

    Dettmer, Simon L.; Keyser, Ulrich F.; Pagliara, Stefano [Cavendish Laboratory, University of Cambridge, 19 J J Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2014-02-15

    In this article we present methods for measuring hindered Brownian motion in the confinement of complex 3D geometries using digital video microscopy. Here we discuss essential features of automated 3D particle tracking as well as diffusion data analysis. By introducing local mean squared displacement-vs-time curves, we are able to simultaneously measure the spatial dependence of diffusion coefficients, tracking accuracies and drift velocities. Such local measurements allow a more detailed and appropriate description of strongly heterogeneous systems as opposed to global measurements. Finite size effects of the tracking region on measuring mean squared displacements are also discussed. The use of these methods was crucial for the measurement of the diffusive behavior of spherical polystyrene particles (505 nm diameter) in a microfluidic chip. The particles explored an array of parallel channels with different cross sections as well as the bulk reservoirs. For this experiment we present the measurement of local tracking accuracies in all three axial directions as well as the diffusivity parallel to the channel axis while we observed no significant flow but purely Brownian motion. Finally, the presented algorithm is suitable also for tracking of fluorescently labeled particles and particles driven by an external force, e.g., electrokinetic or dielectrophoretic forces.

  12. Water Sorption and Hindered Diffusion with Different Chain Stiffness of Superabsorbent Polymer

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Myung-Suk; Lee, Dae-Young [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

    2015-01-15

    Water sorption and diffusion are essential physicochemical properties of a high-performance superabsorbent polymer (SAP). We combine the Park model with the obstruction-scaling model and the water clustering in confined spaces of the polymer hydrogel. Special attention is focused on elucidating the effect of chain stiffness by considering the conformation of the polymer chain. Theoretical model parameters are determined from the best fits by simultaneous nonlinear regressions for both sorption and corrected diffusion data based on previous experiments with poly(acrylamide-co-sodium acrylate) hydrogel. Predictions show that the hindered water diffusivity leads to a sigmoid curve with relative humidity a{sub w}, where it increases monotonically up to aw{sub ≅} 0.6 due to the swelling but decreases at higher a{sub w} caused by water clustering. Water diffusion decreases with increasing chain stiffness, and the larger persistence length provides a smaller opening radius in void spaces regarding the weak elastic deformation of hydrogel under the applied stress.

  13. Observation/confirmation of hindered E2 strength in {sup 18}C/{sup 16}C

    Energy Technology Data Exchange (ETDEWEB)

    Ong, H.J. [Osaka University, RCNP, Ibaraki, Osaka (Japan); Imai, N. [KEK, Tsukuba, Ibaraki (Japan); Suzuki, D.; Iwasaki, H.; Onishi, T.K.; Suzuki, M.K.; Nakao, T.; Ichikawa, Y. [University of Tokyo, Department of Physics, Bunkyo,Tokyo (Japan); Sakurai, H.; Takeuchi, S.; Kondo, Y.; Aoi, N.; Baba, H.; Bishop, S.; Ishihara, M.; Kubo, T.; Motobayashi, T.; Yanagisawa, Y. [RIKEN, RIKEN Nishina Center, Wako, Saitama (Japan); Ota, S. [University of Tokyo, RIKEN Campus, CNS, Wako, Saitama (Japan); Togano, Y.; Kurita, K. [Rikkyo University, Department of Physics, Toshima, Tokyo (Japan); Nakamura, T.; Okumura, T. [Tokyo Institute of Technology, Department of Physics, Meguro, Tokyo (Japan)

    2009-12-15

    We have measured the lifetime of the first excited 2{sup +} state in {sup 18}C using an upgraded recoil shadow method to determine the electric quadrupole transition. The measured mean lifetime is 18.9{+-}0.9 (stat){+-}4.4 (syst) ps, corresponding to B(E2;2{sub 1} {sup +}{yields} 0{sup +} {sub gs}) = 4.3{+-}0.2{+-}1.0 e{sup 2}fm{sup 4}, or about 1.5 Weisskopf units. The mean lifetime of the first 2{sup +} state in {sup 16}C was remeasured to be 18.3{+-}1.4{+-}4.8 ps, about four times shorter than the value reported previously. The discrepancy is explained by incorporating the {gamma} -ray angular distribution obtained in this work into the previous measurement. The observed transition strengths in {sup 16,18}C are hindered compared to the empirical values, indicating that the anomalous E2 strength observed in {sup 16}C persists in {sup 18}C. (orig.)

  14. Doxorubicin hinders DNA condensation promoted by the protein bovine serum albumin (BSA).

    Science.gov (United States)

    Lima, C H M; de Paula, H M C; da Silva, L H M; Rocha, M S

    2017-12-01

    In this work, we have studied the interaction between the anticancer drug doxorubicin (doxo) and condensed DNA, using optical tweezers. To perform this task, we use the protein bovine serum albumin (BSA) in the working buffer to mimic two key conditions present in the real intracellular environment: the condensed state of the DNA and the abundant presence of charged macromolecules in the surrounding medium. In particular, we have found that, when doxo is previously intercalated in disperse DNA, the drug hinders the DNA condensation process upon the addition of BSA in the buffer. On the other hand, when bare DNA is firstly condensed by BSA, doxo is capable to intercalate and to unfold the DNA condensates at relatively high concentrations. In addition, a specific interaction between BSA and doxo was verified, which significantly changes the chemical equilibrium of the DNA-doxo interaction. Finally, the presence of BSA in the buffer stabilizes the double-helix structure of the DNA-doxo complexes, preventing partial DNA denaturation induced by the stretching forces. © 2017 Wiley Periodicals, Inc.

  15. The Heisenberg-Weyl algebra on the circle and a related quantum mechanical model for hindered rotation.

    Science.gov (United States)

    Kouri, Donald J; Markovich, Thomas; Maxwell, Nicholas; Bodmann, Bernhard G

    2009-07-02

    We discuss a periodic variant of the Heisenberg-Weyl algebra, associated with the group of translations and modulations on the circle. Our study of uncertainty minimizers leads to a periodic version of canonical coherent states. Unlike the canonical, Cartesian case, there are states for which the uncertainty product associated with the generators of the algebra vanishes. Next, we explore the supersymmetric (SUSY) quantum mechanical setting for the uncertainty-minimizing states and interpret them as leading to a family of "hindered rotors". Finally, we present a standard quantum mechanical treatment of one of these hindered rotor systems, including numerically generated eigenstates and energies.

  16. An Approach to Understanding Cohesive Slurry Settling, Mobilization, and Hydrogen Gas Retention in Pulsed Jet Mixed Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Gauglitz, Phillip A.; Wells, Beric E.; Fort, James A.; Meyer, Perry A.

    2009-05-22

    The Hanford Waste Treatment and Immobilization Plant (WTP) is being designed and built to pretreat and vitrify a large portion of the waste in Hanford’s 177 underground waste storage tanks. Numerous process vessels will hold waste at various stages in the WTP. Some of these vessels have mixing-system requirements to maintain conditions where the accumulation of hydrogen gas stays below acceptable limits, and the mixing within the vessels is sufficient to release hydrogen gas under normal conditions and during off-normal events. Some of the WTP process streams are slurries of solid particles suspended in Newtonian fluids that behave as non-Newtonian slurries, such as Bingham yield-stress fluids. When these slurries are contained in the process vessels, the particles can settle and become progressively more concentrated toward the bottom of the vessels, depending on the effectiveness of the mixing system. One limiting behavior is a settled layer beneath a particle-free liquid layer. The settled layer, or any region with sufficiently high solids concentration, will exhibit non-Newtonian rheology where it is possible for the settled slurry to behave as a soft solid with a yield stress. In this report, these slurries are described as settling cohesive slurries.

  17. A laboratory investigation of the suspension, transport, and settling of silver carp eggs using synthetic surrogates

    Science.gov (United States)

    Garcia, Tatiana; Zuniga Zamalloa, Carlo; Jackson, P. Ryan; Murphy, Elizabeth A.; Garcia, Marcelo H.

    2015-01-01

    Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter) as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this research study

  18. A Laboratory Investigation of the Suspension, Transport, and Settling of Silver Carp Eggs Using Synthetic Surrogates.

    Directory of Open Access Journals (Sweden)

    Tatiana Garcia

    Full Text Available Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this

  19. A Laboratory Investigation of the Suspension, Transport, and Settling of Silver Carp Eggs Using Synthetic Surrogates.

    Science.gov (United States)

    Garcia, Tatiana; Zuniga Zamalloa, Carlo; Jackson, P Ryan; Murphy, Elizabeth A; Garcia, Marcelo H

    2015-01-01

    Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter) as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this research study

  20. A Laboratory Investigation of the Suspension, Transport, and Settling of Silver Carp Eggs Using Synthetic Surrogates

    Science.gov (United States)

    Garcia, Tatiana; Zuniga Zamalloa, Carlo; Jackson, P. Ryan; Murphy, Elizabeth A.; Garcia, Marcelo H.

    2015-01-01

    Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter) as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this research study

  1. Conflict management strategies in settling workplace disputes: The case of air Zimbabwe

    Directory of Open Access Journals (Sweden)

    Sandiso Ngcobo

    2015-09-01

    Full Text Available The aim of this article is to conduct the analysis of the conflict management strategies that Air Zimbabwe, a service delivery company in Zimbabwe in Southern Africa, employs in settling workplace disputes between it and its employees. The research approach relies mainly on a survey questionnaire that is completed by both the employees and management. The analysis of data is descriptive. The respondents indicate that strategies can move from a positive to a negative approach within a short space of time. The results are often detrimental to the quality of service that the company provides to its clientele. It is recommended that the parties should rely on negotiation and mediation to arrest conflicts before they escalate.

  2. Utilization of C-14 settled urease for diagnosing Campylobacter Pylori in the stomach

    International Nuclear Information System (INIS)

    Chausson, Y.; Coelho, L.G.V.

    1990-01-01

    A new method for diagnosing the Campylobacter Pylori in the stomach is described, using C-14 settled urease. Campylobacter Pylori is now being considered the most probable causative agent of antral chronic gastritis, pepitic ulcer and non-ulcerous dyspepsia. The technique is based on ingestion of the tracer, its recovery by exhalation in etanol hyamine solution, followed by counting and dates evaluation. The test was applied to forty two voluntary male and female patients, after their written acquiescence. Their ages varied from 19 to 62 years old. Thirty of the results were positive and twelve negative. All of them were comproved by microbiological (cultura) and hystologycal studies of gastric biopsy gotten by gastroscopy. They were performed at the Gastroentherology Departament of the 'Hospital das Clinicas' that belongs to the Federal University of Minas Gerais. Repetitivity of the breath test was confirmed by repetition of the results in five positive patients and five negative ones. (author) [pt

  3. The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

    International Nuclear Information System (INIS)

    Shilton, Vaughan; Giess, Paul; Mitchell, David; Williams, Craig

    2002-01-01

    Settled dust has been collected inside the main foyers oft hree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a street canyon used almost exclusively by heavy duty diesel vehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis by scanning electron microscope and energy dispersive X-ray analysis. Using these analytical techniques, individual particle analysis was undertaken for morphology and chemistry. Seasonal variations and variations due to location were observed in both the morphological measurements and chemical analysis. Many of the differences appear attributable to the influence of road traffic, in particular, the heavy duty diesel vehicles, travelling along the street canyon

  4. JURISTIC OBSTACLE IN DECLARING BANKRUPTCY AGAINST INSURANCE COMPANY WHICH FAIL TO SETTLE ITS DEBT LIABILITY

    Directory of Open Access Journals (Sweden)

    Ali Imron

    2017-03-01

    Full Text Available Legal obligation to pay compensation of an insurance company arise immediatelyafter the evenement occurred, if this obligation not being settled right away it can becategorized as “fall due debt” and “claimable”, and this can be used as a reason to proposebankruptcy application. The creditor’s fundamental rights practically impeded by Section 2article (5 of Insolvency Act, which give absolute authority to Minister of Finance in proposingbankruptcy application for insurance company. This authority is attached to the status of Ministerof Finance as the guider and supervisor of insurance institution in Indonesia, but this authorityoften might reduce people’s trust to insurance institution itself if it is not used carefully andwisely. For the sake of law and justice, Minister of Finance should acts proportionally if thebankruptcy application doesn’t have enough reason, according to Minister’s authority in thecase of bankruptcy application for insurance company against their insured and other creditors.

  5. Dynamic one-dimensional modeling of secondary settling tanks and system robustness evaluation.

    Science.gov (United States)

    Li, Ben; Stenstrom, M K

    2014-01-01

    One-dimensional secondary settling tank models are widely used in current engineering practice for design and optimization, and usually can be expressed as a nonlinear hyperbolic or nonlinear strongly degenerate parabolic partial differential equation (PDE). Reliable numerical methods are needed to produce approximate solutions that converge to the exact analytical solutions. In this study, we introduced a reliable numerical technique, the Yee-Roe-Davis (YRD) method as the governing PDE solver, and compared its reliability with the prevalent Stenstrom-Vitasovic-Takács (SVT) method by assessing their simulation results at various operating conditions. The YRD method also produced a similar solution to the previously developed Method G and Enquist-Osher method. The YRD and SVT methods were also used for a time-to-failure evaluation, and the results show that the choice of numerical method can greatly impact the solution. Reliable numerical methods, such as the YRD method, are strongly recommended.

  6. Closure plan for the M-Area settling basin and vicinity at the Savannah River Plant

    International Nuclear Information System (INIS)

    Colven, W.P.; Pickett, J.B.; Muska, C.F.; Boone, L.F.

    1988-03-01

    The closure plan for the M-Area settling basin and vicinity was originally submitted to the South Carolina Department of Health and Environmental Control (SCDHEC) Bureau of Solid and Hazardous Waste Management in September 1984. The plan was revised in July and November 1985 in response to SCDHEC comments. After public comment in April through July 1986, the closure plan was conditionally approved by SCDHEC in March 1987. The conditions included (1) providing a temporary wastewater treatment facility to process the water remaining in the basin, (2) using a burn box to limit ash emissions from burning in the basin, (3) obtaining SCDHEC approval prior to operating the leach field, and (4) completing all closure activities within three years of the startup date

  7. Demonstration test on decontamination of contaminated pool water using liquid-solid settling technology with flocculants

    International Nuclear Information System (INIS)

    Aritomi, Masanori; Adachi, Toshihiro; Watanabe, Noriyuki; Tagawa, Akihiro; Hosobuchi, Shigeki; Takanashi, Junko

    2013-01-01

    For the purpose of supplying agricultural water, a stationary purification system for contaminated water had been developed on the basis of the liquid-solid settling technology using flocculants. Two kinds of flocculants had been developed on the basis of preliminary tests: one that compounds iron ferrocyanide and the other that does not. With the use of this system and flocculants, a demonstration test was conducted to apply the decontamination technology on contaminated water in two swimming pools in an elementary school located at Motomiya City, Fukushima Prefecture, Japan. It is proved from the results that both the developed purification system and the flocculants can be established as a practicable decontamination technology for contaminated water: the treatment rate was 10 m 3 /hour and the elimination factor of radioactive materials was higher than 99%. (author)

  8. Impacts of Sediments on Coral Energetics: Partitioning the Effects of Turbidity and Settling Particles

    Science.gov (United States)

    Junjie, Reef K.; Browne, Nicola K.; Erftemeijer, Paul L. A.; Todd, Peter A.

    2014-01-01

    Sediment loads have long been known to be deleterious to corals, but the effects of turbidity and settling particles have not previously been partitioned. This study provides a novel approach using inert silicon carbide powder to partition and quantify the mechanical effects of sediment settling versus reduced light under a chronically high sedimentary regime on two turbid water corals commonly found in Singapore (Galaxea fascicularis and Goniopora somaliensis). Coral fragments were evenly distributed among three treatments: an open control (30% ambient PAR), a shaded control (15% ambient PAR) and sediment treatment (15% ambient PAR; 26.4 mg cm−2 day−1). The rate of photosynthesis and respiration, and the dark-adapted quantum yield were measured once a week for four weeks. By week four, the photosynthesis to respiration ratio (P/R ratio) and the photosynthetic yield (Fv/Fm) had fallen by 14% and 3–17% respectively in the shaded control, contrasting with corals exposed to sediments whose P/R ratio and yield had declined by 21% and 18–34% respectively. The differences in rates between the shaded control and the sediment treatment were attributed to the mechanical effects of sediment deposition. The physiological response to sediment stress differed between species with G. fascicularis experiencing a greater decline in the net photosynthetic yield (13%) than G. somaliensis (9.5%), but a smaller increase in the respiration rates (G. fascicularis = 9.9%, G. somaliensis = 14.2%). These different physiological responses were attributed, in part, to coral morphology and highlighted key physiological processes that drive species distribution along high to low turbidity and depositional gradients. PMID:25197883

  9. Impacts of sediments on coral energetics: partitioning the effects of turbidity and settling particles.

    Directory of Open Access Journals (Sweden)

    Reef K Junjie

    Full Text Available Sediment loads have long been known to be deleterious to corals, but the effects of turbidity and settling particles have not previously been partitioned. This study provides a novel approach using inert silicon carbide powder to partition and quantify the mechanical effects of sediment settling versus reduced light under a chronically high sedimentary regime on two turbid water corals commonly found in Singapore (Galaxea fascicularis and Goniopora somaliensis. Coral fragments were evenly distributed among three treatments: an open control (30% ambient PAR, a shaded control (15% ambient PAR and sediment treatment (15% ambient PAR; 26.4 mg cm(-2 day(-1. The rate of photosynthesis and respiration, and the dark-adapted quantum yield were measured once a week for four weeks. By week four, the photosynthesis to respiration ratio (P/R ratio and the photosynthetic yield (Fv/Fm had fallen by 14% and 3-17% respectively in the shaded control, contrasting with corals exposed to sediments whose P/R ratio and yield had declined by 21% and 18-34% respectively. The differences in rates between the shaded control and the sediment treatment were attributed to the mechanical effects of sediment deposition. The physiological response to sediment stress differed between species with G. fascicularis experiencing a greater decline in the net photosynthetic yield (13% than G. somaliensis (9.5%, but a smaller increase in the respiration rates (G. fascicularis = 9.9%, G. somaliensis  = 14.2%. These different physiological responses were attributed, in part, to coral morphology and highlighted key physiological processes that drive species distribution along high to low turbidity and depositional gradients.

  10. Helping or hindering: the role of nurse managers in the transfer of practice development learning.

    Science.gov (United States)

    Currie, Kay; Tolson, Debbie; Booth, Jo

    2007-09-01

    This paper reports selected findings from a recent PhD study exploring how graduates from a BSc Specialist Nursing programme, with an NMC-approved Specialist Practitioner Qualification, engage in practice development during their subsequent careers. The UKCC (1998) defines specialist practice as requiring higher levels of judgement, discretion and decision-making, with leadership in clinical practice development forming a core dimension of this level of practice. However, there is little evidence in the published literature that describes or evaluates the practice development role of graduate specialist practitioners. This study applied a modified Glaserian approach to grounded theory methods. A preliminary descriptive survey questionnaire was posted to all graduates from the programme, response rate of 45% (n=102). From these respondents, theoretical sampling decisions directed the selection of 20 participants for interview, permitting data saturation. The grounded theory generated by this study discovered a basic social process labelled 'making a difference', whereby graduate specialist practitioners are increasingly able to impact in developing patient care at a strategic level by coming to own the identity of an expert practitioner (Currie, 2006). Contextual factors strongly influence the practitioner journey, with organizational position and other people presenting enabling or blocking conditions. The line manager plays a crucial role in helping or hindering graduate specialist practitioners to transfer their learning to the clinical setting and become active in practice development. Recommendations to enhance managerial support for the practice development role of graduate specialist practitioners are proposed. ADDING TO CURRENT KNOWLEDGE: This work adds to currently limited knowledge of the graduate specialist practitioners' role in the leadership of clinical practice development. In addition, the findings emphasize the potential influence of the workplace

  11. Decline of Phosphotransfer and Substrate Supply Metabolic Circuits Hinders ATP Cycling in Aging Myocardium.

    Directory of Open Access Journals (Sweden)

    Emirhan Nemutlu

    Full Text Available Integration of mitochondria with cytosolic ATP-consuming/ATP-sensing and substrate supply processes is critical for muscle bioenergetics and electrical activity. Whether age-dependent muscle weakness and increased electrical instability depends on perturbations in cellular energetic circuits is unknown. To define energetic remodeling of aged atrial myocardium we tracked dynamics of ATP synthesis-utilization, substrate supply, and phosphotransfer circuits through adenylate kinase (AK, creatine kinase (CK, and glycolytic/glycogenolytic pathways using 18O stable isotope-based phosphometabolomic technology. Samples of intact atrial myocardium from adult and aged rats were subjected to 18O-labeling procedure at resting basal state, and analyzed using the 18O-assisted HPLC-GC/MS technique. Characteristics for aging atria were lower inorganic phosphate Pi[18O], γ-ATP[18O], β-ADP[18O], and creatine phosphate CrP[18O] 18O-labeling rates indicating diminished ATP utilization-synthesis and AK and CK phosphotransfer fluxes. Shift in dynamics of glycolytic phosphotransfer was reflected in the diminished G6P[18O] turnover with relatively constant glycogenolytic flux or G1P[18O] 18O-labeling. Labeling of G3P[18O], an indicator of G3P-shuttle activity and substrate supply to mitochondria, was depressed in aged myocardium. Aged atrial myocardium displayed reduced incorporation of 18O into second (18O2, third (18O3, and fourth (18O4 positions of Pi[18O] and a lower Pi[18O]/γ-ATP[18 O]-labeling ratio, indicating delayed energetic communication and ATP cycling between mitochondria and cellular ATPases. Adrenergic stress alleviated diminished CK flux, AK catalyzed β-ATP turnover and energetic communication in aging atria. Thus, 18O-assisted phosphometabolomics uncovered simultaneous phosphotransfer through AK, CK, and glycolytic pathways and G3P substrate shuttle deficits hindering energetic communication and ATP cycling, which may underlie energetic

  12. Driving and hindering factors for rural electrification in developing countries: Lessons from Bangladesh

    International Nuclear Information System (INIS)

    Rahman, Md. Mizanur; Paatero, Jukka V.; Poudyal, Aditya; Lahdelma, Risto

    2013-01-01

    Rural electrification is essential for bringing about social and economic developments, but the progress is distressingly slow in most developing countries. The Bangladesh Rural Electrification Program (BREP) has been highlighted as a positive case among developing countries, but from 2006 onwards there have been doubts about the program's chances of success. In this paper, we examine the rural electrification practices in Bangladesh and evaluate the claim that, whereas they were successful up to 2005, they then began to decline in terms of their performance. This study determines the factors behind the initial success of the program as well as those that account for the recent downturn in BREP. We found that the BREP was a clear success in terms of its growth and progress; however, its performance has been declining since 2006. The key driving factors for the success of this program had to do with prioritizing system investment, community involvement, anti-corruption features, standardized practices and performance-based incentives while excluding political parties. The major issues accounting for the decline were the lack of organizational autonomy, a shortage of funding, unrealistic tariffs, and power supply shortages. Renewable-based, off-grid technologies have been successfully supplementing the on-grid program in remote areas. - Highlights: • Rural electrification is essential for bringing about socio-economic developments. • The pace of rural electrification in the developing countries has been very slow. • A multitude of issues plays behind in making the task a success or a failure. • Lack of policy reforms, unrealistic tariffs are the main hinderers. • Rural electrification cannot be successful by sticking to a rigid model

  13. What hinders the development of small businesses: the view of the Murmansk Oblast entrepreneurs

    Directory of Open Access Journals (Sweden)

    Tat’yana Igorevna Barasheva

    2014-07-01

    Full Text Available In recent years there has been a slowdown in the growth rate of Russia’s sector of small and medium entrepreneurship; this issue once again brings to the fore the search for new ways and mechanisms in the management of its subjects. A necessary condition for such a search consists in focusing on the problems that hinder the development of this sector and that can be revealed exclusively in the formation of valuable and accurate information – the collective views of its representatives. In this regard, the information base for the analysis was found in the results of several studies initiated by the all-Russian public organization “OPORA Rossii” (Moscow, its regional branch in Murmansk and the Northern Chamber of Commerce and Industry; the results were obtained in the course of the questionnaire survey, which was conducted among entrepreneurs with the purpose of revealing their assessment of the terms of doing business. The generalization of the research results and information obtained by the author in cooperation with representatives of small business and workers of the Prosecutor’s Office has identified the main problems, their causes and consequences of their impact on the activity of the Murmansk Oblast business sector. In the opinion of a significant part of businessmen, such factor as business climate plays a decisive role in the creation and development of the sector in the region. Despite the complexity of the situation, entrepreneurs do not lose hope of solving their problems and see the solution to the problem in efficient work of the regional and municipal authorities. The author’s conclusions may become a reference point for further reforms in the sphere of management of small enterprises in the Murmansk Oblast

  14. Significance of uncertainties derived from settling tank model structure and parameters on predicting WWTP performance - A global sensitivity analysis study

    DEFF Research Database (Denmark)

    Ramin, Elham; Sin, Gürkan; Mikkelsen, Peter Steen

    2011-01-01

    Uncertainty derived from one of the process models – such as one-dimensional secondary settling tank (SST) models – can impact the output of the other process models, e.g., biokinetic (ASM1), as well as the integrated wastewater treatment plant (WWTP) models. The model structure and parameter...... and from the last aerobic bioreactor upstream to the SST (Garrett/hydraulic method). For model structure uncertainty, two one-dimensional secondary settling tank (1-D SST) models are assessed, including a first-order model (the widely used Takács-model), in which the feasibility of using measured...... uncertainty of settler models can therefore propagate, and add to the uncertainties in prediction of any plant performance criteria. Here we present an assessment of the relative significance of secondary settling model performance in WWTP simulations. We perform a global sensitivity analysis (GSA) based...

  15. Application of radionuclides in water management. I. Sedimentation of industrial and municipal waste waters in settling basing

    Energy Technology Data Exchange (ETDEWEB)

    Blaha, L; Thyn, J [Ustav pro Vyzkum, Vyrobu a Vyuziti Radioisotopu, Prague (Czechoslovakia); Spilowski, S; Strzelczak, G [Institute of Nuclear Research, Warsaw (Poland)

    1978-04-01

    Methods are described of measurement and processing of the pulse response of liquids obtained inside and on the outlet of industrial settling tanks of the DORRA type. The results are used for determining the hydrodynamic characteristics, for estimating the internal recycle and the efficient volume of the tank and for determining the mean flow rates between measuring points. The /sup 82/Br nuclide was used for the determination of the pulse response. A radiotracer (/sup 198/Au) was used for labelling suspended solid particles in determining sedimentation curves in a vertical glass tube. The sedimentation curves and the pulse response of the device were used for the evaluation of the settling process. On the basis of these measurements, the variation of the critical depth of sedimentation and the effective volume of the settling tank were determined as a function of the suspension flow rate in the device (2 to 10 m/sup 3/min/sup -1/).

  16. Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions.

    Science.gov (United States)

    Ramin, Elham; Sin, Gürkan; Mikkelsen, Peter Steen; Plósz, Benedek Gy

    2014-10-15

    Current research focuses on predicting and mitigating the impacts of high hydraulic loadings on centralized wastewater treatment plants (WWTPs) under wet-weather conditions. The maximum permissible inflow to WWTPs depends not only on the settleability of activated sludge in secondary settling tanks (SSTs) but also on the hydraulic behaviour of SSTs. The present study investigates the impacts of ideal and non-ideal flow (dry and wet weather) and settling (good settling and bulking) boundary conditions on the sensitivity of WWTP model outputs to uncertainties intrinsic to the one-dimensional (1-D) SST model structures and parameters. We identify the critical sources of uncertainty in WWTP models through global sensitivity analysis (GSA) using the Benchmark simulation model No. 1 in combination with first- and second-order 1-D SST models. The results obtained illustrate that the contribution of settling parameters to the total variance of the key WWTP process outputs significantly depends on the influent flow and settling conditions. The magnitude of the impact is found to vary, depending on which type of 1-D SST model is used. Therefore, we identify and recommend potential parameter subsets for WWTP model calibration, and propose optimal choice of 1-D SST models under different flow and settling boundary conditions. Additionally, the hydraulic parameters in the second-order SST model are found significant under dynamic wet-weather flow conditions. These results highlight the importance of developing a more mechanistic based flow-dependent hydraulic sub-model in second-order 1-D SST models in the future. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Professionals' Perspectives on Organizational Factors that Support or Hinder the Successful Implementation of Family-Centered Practice

    Science.gov (United States)

    Wright, Alexandra; Hiebert-Murphy, Diane; Trute, Barry

    2010-01-01

    This article presents findings from an exploratory, qualitative study whose objective was to identify professionals' perceptions of organizational factors that support or hinder the implementation of family-centered practice (FCP). Two disability services organizations in Manitoba, Canada, were selected as the research sites. In 2002, all staff…

  18. How Perspective-Taking Helps and Hinders Group-Based Guilt as a Function of Group Identification

    NARCIS (Netherlands)

    Zebel, Sven; Doosje, Bertjan; Spears, Russell

    In two studies we hypothesized that outgroup perspective-taking promotes group-based guilt among weakly identified perpetrator group members, but hinders it among higher identifiers. In Study 1, native Dutch participants (N = 153) confronted their group's past mistreatment of outgroups, while

  19. Preventing the settling of salts of calcium and magnesium in oil production on the Boka oil field

    Energy Technology Data Exchange (ETDEWEB)

    Katincic, Z

    1972-01-01

    The results are given of laboratory and plant tests of the influence of sodium hexametaphosphate on the prevention of separation and settling of the salts of calcium and magnesium in the pipelines of the Boka oil field. All the former methods of fighting the salts consisted in dissolving the sediments of salt and paraffin in pipelines and the obligatory holding up of production, which required a loss in production in addition to material costs. By using the sodium hexametaphosphate, the settling of Ca and Mg salts in pipelines was prevented without holding up the production at considerably smaller cost.

  20. Metal coordination by sterically hindered heterocyclic ligands, including 2-vinylpyridine, assessed by investigation of cobaloximes.

    Science.gov (United States)

    Siega, Patrizia; Randaccio, Lucio; Marzilli, Patricia A; Marzilli, Luigi G

    2006-04-17

    Structural and 1H NMR data have been obtained for cobaloximes with the bulkiest substituted pyridines reported so far. We have isolated in noncoordinating solvents the complexes CH3Co(DH)2L (methylcobaloxime, where DH = the monoanion of dimethylglyoxime) with L = sterically hindered N-donor ligands: quinoline, 4-CH3quinoline, 2,4-(CH3)2pyridine, and 2-R-pyridine (R = CH3, OCH3, CH2CH3, CH=CH2). We have found that the Co-N(ax) bond is very long in the structurally characterized complexes. In particular, CH3Co(DH)2(4-CH3quinoline) has a longer Co-N(ax) bond (2.193(3) A) than any reported for methylcobaloximes. The main cause of the long bonds is unambiguously identified as the steric bulk of L by the fairly linear relationship found for Co-N(ax) distance vs CCA (calculated cone angle, CCA, a computed measure of bulk) over an extensive series of methylcobaloximes. The linear relationship improves if L basicity (quantified by pKa) is taken into account. In anhydrous CDCl3 at 25 degrees C, all complexes except the 2-aminopyridine adduct exhibit 1H NMR spectra consistent with partial dissociation of L to form the methylcobaloxime dimer. 1H NMR experiments at -20 degrees C allowed us to assess qualitatively the relative binding ability of L as follows: 2,4-(CH3)2pyridine > 4-CH3quinoline approximately = quinoline approximately = 2-CH3pyridine > 2-CH3Opyridine > 2-CH3CH2pyridine > 2-CH2=CHpyridine. The broadness of the 1H NMR signals at 25 degrees C suggests a similar order for the ligand exchange rate. The lack of dissociation by 2-aminopyridine is attributed to an intramolecular hydrogen bond between the NH2 group and an oxime O atom. The weaker than expected binding of 2-vinylpyridine relative to the Co-N(ax) bond length is attributed to rotation of the 2-vinyl group required for this bulky ligand to bind to the metal center, a conclusion supported by pronounced changes in 2-vinylpyridine signals upon coordination.

  1. Influence of secondary settling tank performance on suspended solids mass balance in activated sludge systems.

    Science.gov (United States)

    Patziger, M; Kainz, H; Hunze, M; Józsa, J

    2012-05-01

    Secondary settling is the final step of the activated sludge-based biological waste water treatment. Secondary settling tanks (SSTs) are therefore an essential unit of producing a clear effluent. A further important function of SSTs is the sufficient thickening to achieve highly concentrated return sludge and biomass within the biological reactor. In addition, the storage of activated sludge is also needed in case of peak flow events (Ekama et al., 1997). Due to the importance of a high SST performance the problem has long been investigated (Larsen, 1977; Krebs, 1991; Takács et al., 1991; Ekama et al., 1997; Freimann, 1999; Patziger et al., 2005; Bürger et al., 2011), however, a lot of questions are still to solve regarding e.g. the geometrical features (inflow, outflow) and operations (return sludge control, scraper mechanism, allowable maximum values of surface overflow rates). In our study we focused on SSTs under dynamic load considering both the overall unsteady behaviour and the features around the peaks, investigating the effect of various sludge return strategies as well as the inlet geometry on SST performance. The main research tool was a FLUENT-based novel mass transport model consisting of two modules, a 2D axisymmetric SST model and a mixed reactor model of the biological reactor (BR). The model was calibrated and verified against detailed measurements of flow and concentration patterns, sludge settling, accompanied with continuous on-line measurement of in- and outflow as well as returned flow rates of total suspended solids (TSS) and water. As to the inlet arrangement a reasonable modification of the geometry could result in the suppression of the large scale flow structures of the sludge-water interface thus providing a significant improvement in the SST performance. Furthermore, a critical value of the overflow rate (q(crit)) was found at which a pronounced large scale circulation pattern develops in the vertical plane, the density current in

  2. Duration of residence and psychotropic drug use in recently settled refugees in Sweden - a register-based study

    DEFF Research Database (Denmark)

    Brendler-Lindqvist, Maria; Nørredam, Marie Louise; Hjern, Anders

    2014-01-01

    INTRODUCTION: Recently settled refugee populations have consistently been reported to have high rates of mental health problems, particularly Post-traumatic stress disorder, depression, and anxiety disorders. The aim of this study was to investigate psychotropic drug use among young adult refugee...

  3. 21 CFR 1404.635 - May the Office of National Drug Control Policy settle a debarment or suspension action?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false May the Office of National Drug Control Policy settle a debarment or suspension action? 1404.635 Section 1404.635 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 1404.635...

  4. Carbon isotope ratios of organic matter in Bering Sea settling particles. Extremely high remineralization of organic carbon derived from diatoms

    International Nuclear Information System (INIS)

    Yasuda, Saki; Akagi, Tasuku; Naraoka, Hiroshi; Kitajima, Fumio; Takahashi, Kozo

    2016-01-01

    The carbon isotope ratios of organic carbon in settling particles collected in the highly-diatom-productive Bering Sea were determined. Wet decomposition was employed to oxidize relatively fresh organic matter. The amount of unoxidised organic carbon in the residue following wet decomposition was negligible. The δ 13 C of organic carbon in the settling particles showed a clear relationship against SiO 2 /CaCO 3 ratio of settling particles: approximately -26‰ and -19‰ at lower and higher SiO 2 /CaCO 3 ratios, respectively. The δ 13 C values were largely interpreted in terms of mixing of two major plankton sources. Both δ 13 C and compositional data can be explained consistently only by assuming that more than 98% of diatomaceous organic matter decays and that organic matter derived from carbonate-shelled plankton may remain much less remineralized. A greater amount of diatom-derived organic matter is discovered to be trapped with the increase of SiO 2 /CaCO 3 ratio of the settling particles. The ratio of organic carbon to inorganic carbon, known as the rain ratio, therefore, tends to increase proportionally with the SiO 2 /CaCO 3 ratio under an extremely diatom-productive condition. (author)

  5. Modelling lateral entrapment of suspended sediment in estuaries : The role of spatial lags in settling and M4 tidal flow

    NARCIS (Netherlands)

    Yang, Zhongyong; de Swart, Huib E.; Cheng, Heqin; Jiang, Chenjuan; Valle-Levinson, Arnoldo

    2014-01-01

    The effect of the joint action of M2 and M4 tidal flow, residual flow and spatial settling lag on the lateral entrapment of sediment is examined in tidally dominated estuaries with an idealized model that assumes along-estuary uniform conditions. Approximate solutions are obtained for arbitrary

  6. Elevated hair cortisol concentrations in recently fled asylum seekers in comparison to permanently settled immigrants and non-immigrants.

    Science.gov (United States)

    Mewes, R; Reich, H; Skoluda, N; Seele, F; Nater, U M

    2017-03-07

    Recently fled asylum seekers generally live in stressful conditions. Their residency status is mostly insecure and, similar to other immigrants, they experience stress due to acculturation. Moreover, they often suffer from traumatization and posttraumatic stress disorder (PTSD). All of these factors can result in chronic maladaptive biological stress responses in terms of hyper- or hypocortisolism and, ultimately, illness. We believe the current study is the first to compare hair cortisol concentration (HCC) of recently fled asylum seekers with PTSD to those without PTSD, and to compare HCC of asylum seekers to HCC of permanently settled immigrants and non-immigrant individuals. HCC of the previous 2 months was compared between 24 asylum seekers without PTSD, 32 asylum seekers with PTSD, 24 permanently settled healthy Turkish immigrants and 28 non-immigrant healthy Germans as the reference group. Statistical comparisons were controlled for age, sex and body mass index. No significant difference in HCC was found between asylum seekers with and without PTSD. However, the asylum seekers showed a 42% higher HCC than the reference group. In contrast, the permanently settled immigrants exhibited a 23% lower HCC than the reference group. We found relative hypercortisolism in recently fled asylum seekers, but no difference between persons with and without PTSD. These findings add to the very few studies investigating HCC in groups with recent traumatization and unsafe living conditions. Contrary to the findings in asylum seekers, permanently settled immigrants showed relative hypocortisolism. Both hyper- and hypocortisolism may set the stage for the development of stress-related illnesses.

  7. Particle size: a missing factor in risk assessment of human exposure to toxic chemicals in settled indoor dust.

    Science.gov (United States)

    Cao, Zhi-Guo; Yu, Gang; Chen, Yong-Shan; Cao, Qi-Ming; Fiedler, Heidelore; Deng, Shu-Bo; Huang, Jun; Wang, Bin

    2012-11-15

    For researches on toxic chemicals in settled indoor dust, selection of dust fraction is a critical influencing factor to the accuracy of human exposure risk assessment results. However, analysis of the selection of dust fraction in recent studies revealed that there is no consensus. This study classified and presented researches on distribution of toxic chemicals according to dust particle size and on relationship between dust particle size and human exposure possibility. According to the literature, beyond the fact that there were no consistent conclusions on particle size distribution of adherent fraction, dust with particle size less than 100 μm should be paid more attention and that larger than 250 μm is neither adherent nor proper for human exposure risk assessment. Calculation results based on literature data show that with different selections of dust fractions, analytical results of toxic chemicals would vary up to 10-fold, which means that selecting dust fractions arbitrarily will lead to large errors in risk assessment of human exposure to toxic chemicals in settled dust. Taking into account the influence of dust particle size on risk assessment of human exposure to toxic chemicals, a new methodology for risk assessment of human exposure to toxic chemicals in settled indoor dust is proposed and human exposure parameter systems to settled indoor dust are advised to be established at national and regional scales all over the world. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Crystal accumulation in the Hanford Waste Treatment Plant high level waste melter. Preliminary settling and resuspension testing

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fowley, M. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Miller, D. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-05-01

    The full-scale, room-temperature Hanford Tank Waste Treatment and Immobilization Plant (WTP) High-Level Waste (HLW) melter riser test system was successfully operated with silicone oil and magnetite particles at a loading of 0.1 vol %. Design and construction of the system and instrumentation, and the selection and preparation of simulant materials, are briefly reviewed. Three experiments were completed. A prototypic pour rate was maintained, based on the volumetric flow rate. Settling and accumulation of magnetite particles were observed at the bottom of the riser and along the bottom of the throat after each experiment. The height of the accumulated layer at the bottom of the riser, after the first pouring experiment, approximated the expected level given the solids loading of 0.1 vol %. More detailed observations of particle resuspension and settling were made during and after the third pouring experiment. The accumulated layer of particles at the bottom of the riser appeared to be unaffected after a pouring cycle of approximately 15 minutes at the prototypic flow rate. The accumulated layer of particles along the bottom of the throat was somewhat reduced after the same pouring cycle. Review of the time-lapse recording showed that some of the settling particles flow from the riser into the throat. This may result in a thicker than expected settled layer in the throat.

  9. 29 CFR 1471.635 - May the Federal Mediation and Conciliation Service settle a debarment or suspension action?

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false May the Federal Mediation and Conciliation Service settle a...) FEDERAL MEDIATION AND CONCILIATION SERVICE GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 1471.635 May the Federal Mediation and...

  10. 31 CFR 19.635 - May the Department of the Treasury settle a debarment or suspension action?

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false May the Department of the Treasury settle a debarment or suspension action? 19.635 Section 19.635 Money and Finance: Treasury Office of the Secretary of the Treasury GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles...

  11. On The Settling And Response Times Of Underdamped Second-Order Systems

    Directory of Open Access Journals (Sweden)

    Abdul-Fattah Mohamed Ali

    2012-01-01

    Full Text Available The normalized settling time (ts/t values of oscillatory second order systems, when subjected to a step-change forcing function (SCFF, depend on the sensitivity of the measuring instrument employed to indicate the response (± x%. An attempt is made to mathematically relate ts/t to ± x% utilizing the exact, and a simplified, expression for the lower boundary of the decay envelope (LBDE. The two obtained relationships were tested against the actual ts/t values for a settling bands range of ±1% = ±x% = ±6%, covering a damping coefficient range of 0.1 = ? = 0.65. Although the relationships are not exact, their general trend is a marginal overestimation of ts/t. The relationship based on the simplified LBDE was chosen for being simpler and slightly more accurate of the two. This led to a suggested distinction between ts/t and the normalized response time (tR/t, with the latter assigned the value 5/ ? . The ratio ts/tR can thus be readily established for any ± x% value.ABSTRAK: Masa enapan ternormal (ts/t  nilai ayunan system terbit kedua, apabila fungsi memaksa ubah berperingkat (step-change forcing function (SCFF dijalankan ke atasnya, bergantung kepada kepekaan alat pengukur yang digunakan untuk mengukur respons (± x%. Satu percubaan dijalankan secara matematik untuk mengaitkan ts/t to ± x% dengan mempergunakan ekspresi yang tepat dan mudah, pada sempadan bawah sampul reputan (lower boundary of the decay envelope (LBDE. Dua hubungan yang diperolehi dikaji terhadap nilai ts/t sebenar untuk julat jalur enapan ±1% = ±x% = ±6%, melingkungi julat pekali redaman 0.1 = ? = 0.65. Walaupun hubungannya tidak tepat, trend umum merupakan penganggaran marginal ts/t. Hubungan berdasarkan LBDE adalah berdasarkan  LBDE yang telah dipermudahkan, ia dipilih kerana ianya senang dan agak tepat antara keduanya. Ini mendorong kepada perbezaan yang disarankan antara ts/t  dan waktu respons ternormal (tR/t, dengan nilai 5/ ? yang ditetapkan kemudiannya

  12. Investigation of hydrodynamic parameters in a novel expanded bed configuration: local axial dispersion characterization and an empirical correlation study

    Directory of Open Access Journals (Sweden)

    E. S. Taheri

    2012-12-01

    Full Text Available Study of liquid behavior in an expanded bed adsorption (EBA system is important for understanding, modeling and predicting nanobioproduct/biomolecule adsorption performance in such processes. In this work, in order to analyze the local axial dispersion parameters, simple custom NBG (Nano Biotechnology Group expanded bed columns with 10 and 26 mm inner diameter were modified by insertion of sampling holes. Based on this configuration, the particles and liquid can be withdrawn directly from various axial positions of the columns. Streamline DEAE particles were used as solid phase in this work. The effects of factors such as liquid velocity, viscosity, settled bed height and column diameter on the hydrodynamic parameters were investigated. Local bed voidages in different axial bed positions were measured by a direct procedure within the column with 26 mm diameter. Increasing trend of voidage with velocity at a certain position of the bed and with bed height at a certain degree of expansion was observed. Residence time distribution (RTD analysis at various bed points showed approximately uniform hydrodynamic behavior in the column with 10 mm diameter while a decreasing trend of mixing/dispersion along the bed height at a certain degree of expansion was seen in the column with 26 mm diameter. Also lower mixing/dispersion occured in the smaller diameter column. Finally, a combination of two empirical correlations proposed by Richardson-Zaki and Tong-Sun was successfully employed for identification of the bed voidage at various bed heights (RSSE=99.9%. Among the empirical correlations presented in the literatures for variation of the axial dispersion coefficient, the Yun correlation gave good agreement with our experimental data (RSSE=87% in this column.

  13. PARTITIONING TUNGSTEN BETWEEN MATRIX PRECURSORS AND CHONDRULE PRECURSORS THROUGH RELATIVE SETTLING

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Alexander, E-mail: ahubbard@amnh.org [American Museum of Natural History, New York, NY (United States)

    2016-08-01

    Recent studies of chondrites have found a tungsten isotopic anomaly between chondrules and matrix. Given the refractory nature of tungsten, this implies that W was carried into the solar nebula by at least two distinct families of pre-solar grains. The observed chondrule/matrix split requires that the distinct families were kept separate during the dust coagulation process, and that the two families of grain interacted with the chondrule formation mechanism differently. We take the co-existence of different families of solids in the same general orbital region at the chondrule-precursor size as given, and explore the requirements for them to have interacted with the chondrule formation process at significantly different rates. We show that this sorting of families of solids into chondrule- and matrix-destined dust had to have been at least as powerful a sorting mechanism as the relative settling of aerodynamically distinct grains at least two scale heights above the midplane. The requirement that the chondrule formation mechanism was correlated in some fashion with a dust-grain sorting mechanism argues strongly for spatially localized chondrule formation mechanisms such as turbulent dissipation in non-thermally ionized disk surface layers, and argues against volume-filling mechanisms such as planetesimal bow shocks.

  14. PARTITIONING TUNGSTEN BETWEEN MATRIX PRECURSORS AND CHONDRULE PRECURSORS THROUGH RELATIVE SETTLING

    International Nuclear Information System (INIS)

    Hubbard, Alexander

    2016-01-01

    Recent studies of chondrites have found a tungsten isotopic anomaly between chondrules and matrix. Given the refractory nature of tungsten, this implies that W was carried into the solar nebula by at least two distinct families of pre-solar grains. The observed chondrule/matrix split requires that the distinct families were kept separate during the dust coagulation process, and that the two families of grain interacted with the chondrule formation mechanism differently. We take the co-existence of different families of solids in the same general orbital region at the chondrule-precursor size as given, and explore the requirements for them to have interacted with the chondrule formation process at significantly different rates. We show that this sorting of families of solids into chondrule- and matrix-destined dust had to have been at least as powerful a sorting mechanism as the relative settling of aerodynamically distinct grains at least two scale heights above the midplane. The requirement that the chondrule formation mechanism was correlated in some fashion with a dust-grain sorting mechanism argues strongly for spatially localized chondrule formation mechanisms such as turbulent dissipation in non-thermally ionized disk surface layers, and argues against volume-filling mechanisms such as planetesimal bow shocks.

  15. Means to be settled on in case of a nuclear accident

    International Nuclear Information System (INIS)

    Nenot, J.C.

    1988-01-01

    The emergency plan must be based on a study of radiological consequences of radioactive releases in case of a reference accident. This plan must be flexible and adaptable to the real situations that often difer from the reference accident. The optimal method of the intervention in case of accidents depends on the comparison between the loss caused by the intervention and the advantage offered by the dose reduction. The emergency plans include three levels: The first one concerns the classical accidents, the second concerns the radiological accidents limited inside the nuclear installations site and the third concerns the events that can create a radiological risk outside the site. These emergency plans have been discussed in this paper. The protection population measures are various and numerous. The selection of the most appropriate measures depends on several parameters (demographic, ecological, geographical, socio-economical, meteorological...). So, it is necessary to consider all types of accident and to settle protection measures adaptable to each accidental situation. The essential protection measures have been defined and discussed. A radiological surveillance plan has also to be established. The international and inter-regional cooperation plays a large part in the reduction of the accident consequences. So, it is to be hoped that countries,in a same region, would establish mutual assistance conventions. 3 tabs., 11 refs.(author)

  16. Coal-tar-based parking lot sealcoat: An unrecognized source of PAH to settled house dust

    Science.gov (United States)

    Mahler, B.J.; Van Metre, P.C.; Wilson, J.T.; Musgrove, M.; Burbank, T.L.; Ennis, T.E.; Bashara, T.J.

    2010-01-01

    Despite much speculation, the principal factors controlling concentrations of polycyclic aromatic hydrocarbons (PAH) in settled house dust (SHD) have not yet been identified. In response to recent reports that dust from pavement with coaltar-based sealcoat contains extremely high concentrations of PAH, we measured PAH in SHD from 23 apartments and in dust from their associated parking lots, one-half of which had coal-tar-based sealcoat (CT). The median concentration of total PAH (T-PAH) in dust from CT parking lots (4760 ??g/g, n = 11) was 530 times higher than that from parking lots with other pavement surface types (asphalt-based sealcoat, unsealed asphalt, concrete [median 9.0 ??g/g, n = 12]). T-PAH in SHD from apartments with CT parking lots (median 129 ??g/g) was 25 times higher than that in SHD from apartments with parking lots with other pavement surface types (median 5.1 ??g/g). Presence or absence of CT on a parking lot explained 48% of the variance in log-transformed T-PAH in SHD. Urban land-use intensity near the residence also had a significant but weaker relation to T-PAH. No other variables tested, including carpeting, frequency of vacuuming, and indoor burning, were significant. ?? 2010 American Chemical Society.

  17. Performance of Africanized honeybee colonies settled by queens selected for different traits

    Directory of Open Access Journals (Sweden)

    Tânia Patrícia Schafaschek

    2016-01-01

    Full Text Available We evaluated varroa infestation and the performance of Africanized honeybee colonies with queens selected for honey and royal jelly production, and also unselected queens, correlating with climatic variables. In Campo Alegre, Santa Catarina State, Brazil, the experiment I used 10 Langstroth hives and in Mafra, Santa Catarina State, Brazil, the experiment II was performed with 15 Schenk hives. A mapping in areas of sealed and unsealed brood, honey and pollen was carried out on days zero, 45 and 90 days after the introduction of the queen. In the experiment I, there was interaction between the type of queen selection and the evaluation period for areas of sealed brood, honey, and total stored food. The group selected for royal jelly production presented larger sealed brood area and smaller honey area at 90 days. Varroa infestation was lower (p < 0.05 at 90 days. The type of queen selection and the evaluation period influenced the sealed brood area, the total brood and the total area occupied in the colony. The high relative humidity caused greater honey storage for the local group. The different groups of queens presented different behavior according to the environment in which they are settled.

  18. Settling of Spinel in A High-Level Waste Glass Melter

    International Nuclear Information System (INIS)

    Pavel Hrma; Pert Schill; Lubomir Nemec

    2002-01-01

    High-level nuclear waste is being vitrified, i.e., converted to a durable glass that can be stored in a safe repository for hundreds of thousands of years. Waste vitrification is accomplished in reactors call melters to which the waste is charged together with glass-forming additives. The mixture is electrically heated to a temperature as high as 1150 degree C (or even higher in advanced melters) to create a melt that becomes glass on cooling. This process is slow and expensive. Moreover, the melters that are currently in use or are going to be used in the U.S. are sensitive to clogging and thus cannot process melt in which solid particles are suspended. These particles settle and gradually accumulate on the melter bottom. Such particles, most often small crystals of spinel ( a mineral containing iron, nickel, chromium, and other minor oxides), inevitably occurred in the melt when the content of the waste in the glass (called waste loading) increases above a certain limit. To avoid the presence of solid particles in the melter, the waste loading is kept rather low, in average 15% lower than in glass formulated for more robust melters

  19. Preliminary Assessment of Health Risks of Potentially Toxic Elements in Settled Dust over Beijing Urban Area

    Directory of Open Access Journals (Sweden)

    Dejun Wan

    2016-05-01

    Full Text Available To examine levels, health risks, sources, and spatial distributions of potentially toxic elements in settled dust over Beijing urban area, 62 samples were collected mostly from residential building outdoor surfaces, and their <63 μm fractions were measured for 12 potentially toxic elements. The results show that V, Cr, Mn, Co, Ni, and Ba in dust are from predominantly natural sources, whereas Cu, Zn, As, Cd, Sb, and Pb mostly originate from anthropogenic sources. Exposure to these elements in dust has significant non-cancer risks to children but insignificant to adults. Cancer risks of Cr, Co, Ni, As, and Cd via inhalation and dermal contact are below the threshold of 10−6–10−4 but As via dust ingestion shows a tolerable risk. The non-cancer risks to children are contributed mainly (75% by As, Pb, and Sb, and dominantly (92% via dust ingestion, with relatively higher risks mainly occurring in the eastern and northeastern Beijing urban areas. Although Cd, Zn, and Cu in dust are heavily affected by anthropogenic sources, their health risks are insignificant. Source appointments suggest that coal burning emissions, the dominant source of As, are likely the largest contributors to the health risk, and traffic-related and industrial emissions are also important because they contribute most of the Pb and Sb in dust.

  20. Model of the hydrodynamic loads applied on a rotating halfbridge belonging to a circular settling tank

    Science.gov (United States)

    Dascalescu, A. E.; Lazaroiu, G.; Scupi, A. A.; Oanta, E.

    2016-08-01

    The rotating half-bridge of a settling tank is employed to sweep the sludge from the wastewater and to vacuum and sent it to the central collector. It has a complex geometry but the main beam may be considered a slender bar loaded by the following category of forces: concentrated forces produced by the weight of the scrapping system of blades, suction pipes, local sludge collecting chamber, plus the sludge in the horizontal sludge transporting pipes; forces produced by the access bridge; buoyant forces produced by the floating barrels according to Archimedes’ principle; distributed forces produced by the weight of the main bridge; hydrodynamic forces. In order to evaluate the hydrodynamic loads we have conceived a numerical model based on the finite volume method, using the ANSYS-Fluent software. To model the flow we used the equations of Reynolds Averaged Navier-Stokes (RANS) for liquids together with Volume of Fluid model (VOF) for multiphase flows. For turbulent model k-epsilon we used the equation for turbulent kinetic energy k and dissipation epsilon. These results will be used to increase the accuracy of the loads’ sub-model in the theoretical models, e. the finite element model and the analytical model.

  1. Dynamic one-dimensional modeling of secondary settling tanks and design impacts of sizing decisions.

    Science.gov (United States)

    Li, Ben; Stenstrom, Michael K

    2014-03-01

    As one of the most significant components in the activated sludge process (ASP), secondary settling tanks (SSTs) can be investigated with mathematical models to optimize design and operation. This paper takes a new look at the one-dimensional (1-D) SST model by analyzing and considering the impacts of numerical problems, especially the process robustness. An improved SST model with Yee-Roe-Davis technique as the PDE solver is proposed and compared with the widely used Takács model to show its improvement in numerical solution quality. The improved and Takács models are coupled with a bioreactor model to reevaluate ASP design basis and several popular control strategies for economic plausibility, contaminant removal efficiency and system robustness. The time-to-failure due to rising sludge blanket during overloading, as a key robustness indicator, is analyzed to demonstrate the differences caused by numerical issues in SST models. The calculated results indicate that the Takács model significantly underestimates time to failure, thus leading to a conservative design. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Finite elements model of a rotating half-bridge belonging to a circular settling tank

    Science.gov (United States)

    Dascalescu, A. E.; Lazaroiu, G.; Scupi, A. A.; Oanta, E.

    2016-08-01

    A circular settling tank is an open reservoir used for the gravitational separation of the sludge and of the clarified water which is discharged in the launder which is mounted at the periphery of the basin. The extraction of the sludge is done by the use of a rotating half-bridge which sweeps the sludge, vacuums it using a system of scrapping blades and suction pipes, collects it in some local sludge chambers and pour it in a central collecting tank. The rotating half-bridge is a complex structure under a complex system of loads, therefore advanced instruments of investigation are required to assess the state of strains and stresses in this structure. Until now an analytical model was developed based on the hypotheses specific to the strength of materials academic discipline. The numerical models presented in the paper use the finite element method to determine the displacements of the main beam loaded by the weight of the structure and by the Archimedes’ forces. The results of the models developed so far are conclusive for the future directions of research which aims a higher degree of accuracy of the models and of the according research methodology.

  3. Microbial communities in riparian soils of a settling pond for mine drainage treatment.

    Science.gov (United States)

    Fan, Miaochun; Lin, Yanbing; Huo, Haibo; Liu, Yang; Zhao, Liang; Wang, Entao; Chen, Weimin; Wei, Gehong

    2016-06-01

    Mine drainage leads to serious contamination of soil. To assess the effects of mine drainage on microbial communities in riparian soils, we used an Illumina MiSeq platform to explore the soil microbial composition and diversity along a settling pond used for mine drainage treatment. Non-metric multidimensional scaling analysis showed that the microbial communities differed significantly among the four sampling zones (influent, upstream, downstream and effluent), but not seasonally. Constrained analysis of principal coordinates indicated heavy metals (zinc, lead and copper), total sulphur, pH and available potassium significantly influenced the microbial community compositions. Heavy metals were the key determinants separating the influent zone from the other three zones. Lower diversity indices were observed in the influent zone. However, more potential indicator species, related to sulphur and organic matter metabolism were found there, such as the sulphur-oxidizing genera Acidiferrobacter, Thermithiobacillus, Limnobacter, Thioprofundum and Thiovirga, and the sulphur-reducing genera Desulfotomaculum and Desulfobulbus; the organic matter degrading genera, Porphyrobacter and Paucimonas, were also identified. The results indicated that more microorganisms related to sulphur- and carbon-cycles may exist in soils heavily contaminated by mine drainage. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. The mechanism of erythrocyte sedimentation. Part 2: The global collapse of settling erythrocyte network.

    Science.gov (United States)

    Pribush, A; Meyerstein, D; Meyerstein, N

    2010-01-01

    Results reported in the companion paper showed that erythrocytes in quiescent blood are combined into a network followed by the formation of plasma channels within it. This study is focused on structural changes in the settling dispersed phase subsequent to the channeling and the effect of the structural organization on the sedimentation rate. It is suggested that the initial, slow stage of erythrocyte sedimentation is mainly controlled by the gravitational compactness of the collapsed network. The lifetime of RBC network and hence the duration of the slow regime of erythrocyte sedimentation decrease with an increase in the intercellular pair potential and with a decrease in Hct. The gravitational compactness of the collapsed network causes its rupture into individual fragments. The catastrophic collapse of the network transforms erythrocyte sedimentation from slow to fast regime. The size of RBC network fragment is insignificantly affected by Hct and is mainly determined by the intensity of intercellular attractive interactions. When cells were suspended in the weak aggregating medium, the Stokes radius of fragments does not differ measurably from that of individual RBCs. The proposed mechanism provides a reasonable explanation of the effects of RBC aggregation, Hct and the initial height of the blood column on the delayed erythrocyte sedimentation.

  5. Leachability of solidified (Ba,Ra)SO/sub 4/ sediments in simulated settling ponds

    International Nuclear Information System (INIS)

    Constable, T.W.; Snodgrass, W.J.

    1988-01-01

    The decanted effluent from uranium tailings basins contains large amounts of dissolved Ra-226. To remove this Ra-226, the effluent is treated with barium chloride (BaCl/sub 2/) to precipitate barium-radium sulphate -(Ba,Ra)SO/sub 4/]. The sediments are stored on the bottom of the treatment pond and the treated effluent is discharged to a local water course. However, redissolution of Ra-226 fro these sediments may occur after the tailings area has been abandoned and thus cause contamination of receiving waters. This study was conducted to investigate the rate at which this dissolution occurred and to determine if this rate could be decreased by solidification of the sediments. Solidification (also referred to as chemical fixation or encapsulation) involves mixing the sediments with chemicals to produce a solid matrix analogous to concrete. The sediments used in the study were dredged in 1976 from the bottom of the North Nordic Lake settling pond in Elliot Lake, Ontario, which receives the effluent from the Nordic tailings area

  6. Individual consistency in the behaviors of newly-settled reef fish.

    Science.gov (United States)

    White, James R; Meekan, Mark G; McCormick, Mark I

    2015-01-01

    Flexibility in behavior is advantageous for organisms that transition between stages of a complex life history. However, various constraints can set limits on plasticity, giving rise to the existence of personalities that have associated costs and benefits. Here, we document a field and laboratory experiment that examines the consistency of measures of boldness, activity, and aggressive behavior in the young of a tropical reef fish, Pomacentrus amboinensis (Pomacentridae) immediately following their transition between pelagic larval and benthic juvenile habitats. Newly-settled fish were observed in aquaria and in the field on replicated patches of natural habitat cleared of resident fishes. Seven behavioral traits representing aspects of boldness, activity and aggression were monitored directly and via video camera over short (minutes), medium (hours), and long (3 days) time scales. With the exception of aggression, these behaviors were found to be moderately or highly consistent over all time scales in both laboratory and field settings, implying that these fish show stable personalities within various settings. Our study is the first to examine the temporal constancy of behaviors in both field and laboratory settings in over various time scales at a critically important phase during the life cycle of a reef fish.

  7. Access to childhood immunisation services and its determinants among recent and settled migrants in Delhi, India.

    Science.gov (United States)

    Kusuma, Y S; Kaushal, S; Sundari, A B; Babu, B V

    2018-03-27

    Childhood immunisation is one of the important public health interventions, and poor migrants are vulnerable to forego these services. The objective of the study is to understand the access of childhood immunisation services to the socio-economically disadvantaged migrants and the determinants of full immunisation uptake up to the age of 1 year. In a cross-sectional survey, 458 migrant households with a child aged up to 2 years were identified. Data on sociodemographics, migration history, receipt of various vaccines and maternal healthcare services were collected through interviewer-administered pretested questionnaires. Multiple logistic regression analysis was performed to identify the determinants of full immunisation status. Childhood immunisation coverage rates were low as only 31% of recent-migrant children and 53% of settled-migrant children were fully immunised against seven vaccine-preventable diseases (VPDs) by 12 months of age. Lack of awareness of the immunisation schedule and location of health facilities, mobility, illness of the child, fear of vaccines and side-effects were the main reasons for incomplete or no immunisation. Mother's educational attainment, TV viewership, hospital birth and receipt of information on childhood immunisation from the health workers during postnatal visits increased chances of getting the child fully immunised against seven VPDs by 1 year of age. The migrants, particularly the recent migrants, are at the risk of foregoing immunisation services because of livelihood insecurity, mobility and non-familiarity of services in the new urban environment. There is a need to deliver services with a focus on recent migrants. Investing in education and socio-economic development and providing secured livelihoods and equitable services are important to improve and sustain access to healthcare services in the long run. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  8. Contamination of settling ponds of coal mines caused by natural radionuclides

    International Nuclear Information System (INIS)

    Michalik, B.; Chalupnik, S.; Skubacz, K.; Wysocka, M.; Mielnikow, A.

    2002-01-01

    As a result of a discharge of the radium-bearing waters from coal mines into settlement ponds and later into rivers a significant increase of radium concentration in bottom sediments can be observed. Sometimes also a contamination of river banks, soils and vegetation occurs. Mine waters contain mainly radium isotopes i.e. 226 Ra from uranium series and 228 Ra from thorium series. Due to chemical properties of such brines, these waters contain usually no uranium, no thorium and rather seldom elevated concentration of other isotopes as lead ( 210 Pb) and polonium ( 210 Po). The deposition or adsorption of radium on bottom sediments may take place on a distance of several kilometers from the discharge points. After a deposition or adsorption of radium isotopes the built-up of the activity of their progeny begins. Therefore concentrations of radium isotopes are higher than the decay products. We are able to measure the disequilibrium in 226 Ra decay chain as well as in 228 Ra decay chain, which shows the approximate age of the deposit. The paper describes results of investigation of sediments with enhanced natural radioactivity occurring in settlement ponds, where mine waters have been dumped. The results of measurements show that these deposits contain mainly 226 Ra and 228 Ra and their progeny. Influence of bottom sediments with enhanced radium concentration on the natural environment in the vicinity of settlement ponds was studied on the example of two different water reservoirs where radium-bearing mine waters type A and B are released. The results show clearly enhanced radioactivity of bottom sediments and water in the settling ponds and in the rivers, but no evident enhancement was found in the adjacent land. Both coal mines are located in the drainage area of Vistula river, and bottom sediments with enhanced radium concentrations were found in Vistula up to 70 km downstream from the discharge point. (author)

  9. Toxigenic Fusarium spp. as determinants of trichothecene mycotoxins in settled grain dust.

    Science.gov (United States)

    Halstensen, Anne Straumfors; Nordby, Karl-Christian; Klemsdal, Sonja Sletner; Elen, Oleif; Clasen, Per-Erik; Eduard, Wijnand

    2006-12-01

    Trichothecenes are immunosuppressive mycotoxins produced mainly by Fusarium spp. and often are detected as natural contaminants of grain and other agricultural products. Exposure to trichothecenes through inhalation during grain work may represent possible health risks for grain farmers. We aimed, therefore, to investigate the level of Fusarium spp. and trichothecenes in settled grain dust collected during work on 92 Norwegian farms. Mycotoxins were determined by gas chromatography-mass spectrometry, whereas the Fusarium spp. were identified and quantified both by species-specific semiquantitative polymerase chain reaction (PCR) and by cultivation. All potential trichothecene-producing molds in the grain dust were quantified using a PCR assay specific for tri5, the gene coding for trichodiene synthase that catalyzes the first step in the trichothecene biosynthesis. We performed correlation analysis between mold-DNA and mycotoxins to assess whether the PCR-detected DNA could be used as indicators of the mycotoxins. The methodological problem of detecting small amounts of airborne mycotoxins during grain work may then be avoided. Whereas the trichothecene-producing Fusarium species in grain dust could not be identified or quantified to a sufficient extent by cultivation, all investigated Fusarium spp. could be specifically detected by PCR and quantified from the DNA agarose gel band intensities. Furthermore, we observed a strong correlation between the trichothecenes HT-2 toxin (HT-2) or T-2 toxin (T-2) and DNA specific for tri5 (r = 0.68 for HT-2 and r = 0.50 for T-2; p grain dust during work, but the use of Fusarium-DNA as indicators for trichothecenes should be used cautiously.

  10. Oyster larvae settle in response to habitat-associated underwater sounds.

    Science.gov (United States)

    Lillis, Ashlee; Eggleston, David B; Bohnenstiehl, DelWayne R

    2013-01-01

    Following a planktonic dispersal period of days to months, the larvae of benthic marine organisms must locate suitable seafloor habitat in which to settle and metamorphose. For animals that are sessile or sedentary as adults, settlement onto substrates that are adequate for survival and reproduction is particularly critical, yet represents a challenge since patchily distributed settlement sites may be difficult to find along a coast or within an estuary. Recent studies have demonstrated that the underwater soundscape, the distinct sounds that emanate from habitats and contain information about their biological and physical characteristics, may serve as broad-scale environmental cue for marine larvae to find satisfactory settlement sites. Here, we contrast the acoustic characteristics of oyster reef and off-reef soft bottoms, and investigate the effect of habitat-associated estuarine sound on the settlement patterns of an economically and ecologically important reef-building bivalve, the Eastern oyster (Crassostrea virginica). Subtidal oyster reefs in coastal North Carolina, USA show distinct acoustic signatures compared to adjacent off-reef soft bottom habitats, characterized by consistently higher levels of sound in the 1.5-20 kHz range. Manipulative laboratory playback experiments found increased settlement in larval oyster cultures exposed to oyster reef sound compared to unstructured soft bottom sound or no sound treatments. In field experiments, ambient reef sound produced higher levels of oyster settlement in larval cultures than did off-reef sound treatments. The results suggest that oyster larvae have the ability to respond to sounds indicative of optimal settlement sites, and this is the first evidence that habitat-related differences in estuarine sounds influence the settlement of a mollusk. Habitat-specific sound characteristics may represent an important settlement and habitat selection cue for estuarine invertebrates and could play a role in driving

  11. Oyster larvae settle in response to habitat-associated underwater sounds.

    Directory of Open Access Journals (Sweden)

    Ashlee Lillis

    Full Text Available Following a planktonic dispersal period of days to months, the larvae of benthic marine organisms must locate suitable seafloor habitat in which to settle and metamorphose. For animals that are sessile or sedentary as adults, settlement onto substrates that are adequate for survival and reproduction is particularly critical, yet represents a challenge since patchily distributed settlement sites may be difficult to find along a coast or within an estuary. Recent studies have demonstrated that the underwater soundscape, the distinct sounds that emanate from habitats and contain information about their biological and physical characteristics, may serve as broad-scale environmental cue for marine larvae to find satisfactory settlement sites. Here, we contrast the acoustic characteristics of oyster reef and off-reef soft bottoms, and investigate the effect of habitat-associated estuarine sound on the settlement patterns of an economically and ecologically important reef-building bivalve, the Eastern oyster (Crassostrea virginica. Subtidal oyster reefs in coastal North Carolina, USA show distinct acoustic signatures compared to adjacent off-reef soft bottom habitats, characterized by consistently higher levels of sound in the 1.5-20 kHz range. Manipulative laboratory playback experiments found increased settlement in larval oyster cultures exposed to oyster reef sound compared to unstructured soft bottom sound or no sound treatments. In field experiments, ambient reef sound produced higher levels of oyster settlement in larval cultures than did off-reef sound treatments. The results suggest that oyster larvae have the ability to respond to sounds indicative of optimal settlement sites, and this is the first evidence that habitat-related differences in estuarine sounds influence the settlement of a mollusk. Habitat-specific sound characteristics may represent an important settlement and habitat selection cue for estuarine invertebrates and could play a

  12. Bench-scale enhanced sludge washing and gravity settling of Hanford Tank C-106 Sludge

    International Nuclear Information System (INIS)

    Brooks, K.P.; Myers, R.L.; Rappe, K.G.

    1997-01-01

    This report summarizes the results of a bench-scale sludge pretreatment demonstration of the Hanford baseline flowsheet using liter-quantities of sludge from Hanford Site single-shell tank 241-C-106 (tank C-106). The leached and washed sludge from these tests provided Envelope D material for the contractors supporting Tank Waste Remediation System (TWRS) Privatization. Pretreatment of the sludge included enhanced sludge washing and gravity settling tests and providing scale-up data for both these unit operations. Initial and final solids as well as decanted supernatants from each step of the process were analyzed chemically and radiochemically. The results of this work were compared to those of Lumetta et al. (1996a) who performed a similar experiment with 15 grams of C-106, sludge. A summary of the results are shown in Table S.1. Of the major nonradioactive components, those that were significantly removed with enhanced sludge washing included aluminum (31%), chromium (49%), sodium (57%), and phosphorus (35%). Of the radioactive components, a significant amount of 137 Cs (49%) were removed during the enhanced sludge wash. Only a very small fraction of the remaining radionuclides were removed, including 90 Sr (0.4%) and TRU elements (1.5%). These results are consistent with those of the screening test. All of the supernatants (both individually and as a blend) removed from these washing steps, once vitrified as LLW glasses (at 20 wt% Na 2 O), would be less than NRC Class C in TRU elements and less than NRC Class B in 90 Sr

  13. Factors affecting settling, survival, and viability of black bears reintroduced to Felsenthal National Wildlife Refuge, Arkansas

    Science.gov (United States)

    Wear, B.J.; Eastridge, R.; Clark, J.D.

    2005-01-01

    We used radiotelemetry and population modeling techniques to examine factors related to population establishment of black bears (Ursus americanus) reintroduced to Felsenthal National Wildlife Refuge (NWR), Arkansas. Our objectives were to determine whether settling (i.e., establishment of a home range at or near the release site), survival, recruitment, and population viability were related to age class of reintroduced bears, presence of cubs, time since release, or number of translocated animals. We removed 23 adult female black bears with 56 cubs from their winter dens at White River NWR and transported them 160 km to man-made den structures at Felsenthal NWR during spring 2000–2002. Total movement and average circuity of adult females decreased from 1 month, 6 months, and 1 year post-emergence (F2,14 =19.7, P bears was 0.624 (SE = 0.110, SEinterannual = 0.144), and the survival rate of their cubs was 0.750 (SE = 0.088, SEinterannual = 0.109). The homing rate (i.e., the proportion of bears that returned to White River NWR) was 13%. Annual survival for female bears that remained at the release site and survived >1-year post-release increased to 0.909 (SE = 0.097, SEinterannual=0.067; Z=3.5, P bear population at Felsenthal NWR is at or above the number after which extinction risk declines dramatically, although additional releases of bears could significantly decrease time to population reestablishment. Poaching accounted for at least 3 of the 8 adult mortalities that we documented; illegal kills could be a significant impediment to population re-establishment at Felsenthal NWR should poaching rates escalate.

  14. Conditions for settling liquid levels by means of gamma-ray relay control

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, N [Kobe Univ. (Japan). Faculty of Engineering

    1976-03-01

    Using a control action which consists of infusion and exhaust at constant speeds and a neutral zone to maintain liquid levels within a given range, a gamma-ray source, a detector, and two relays at the upper and lower limits of the counting rate were provided. The optimum condition in this case is discussed and confirmed experimentally. Since a counting rate-meter has a time constant and its output is subject to the statistical fluctuation, the liquid level may overrun the opposite limit, move again after settling within the range, or drift far out of the range by a load before actuation of the relay. Formulas are derived providing the conditions such that these phenomena will not occur more frequently than a tolerant probability. These give the relations between the counting rates at the upper and lower limits, the time constant of the rate-meter, the multipliers of the standard deviations of the counting rates, the infusing and exhausting speeds, and the hysteresis widths of the limiting relays. Since it can be said that the first two of the five quantities should be smaller and the next two greater, the optimum condition can be determined from the formulas. When the infusing and exhausting speeds are the same and the hysteresis widths are equal, the formulas show that the optimum is a case where the ratio of the counting rates at the two limits, which is taken smaller than unity, is small, and where each hysteresis width is equal to 0.34 times the difference between the two counting rates, almost regardless of the value of their ratio. The above-mentioned deductions were examined in a system constructed with a backscattered gamma-ray type level gauge and a controller for infusion and exhaust of water. Its results almost agreed with those of the deductions when the multipliers of the standard deviations are substituted for by 2.

  15. Settling characteristics of fine-grained sediments used in Louisiana coastal land building and restoration projects

    Science.gov (United States)

    Ghose Hajra, M.

    2016-02-01

    Coastal property development, sea level rise, geologic subsidence, loss of barrier islands, increasing number and intensity of coastal storms and other factors have resulted in water quality degradation, wetlands loss, reduced storm and surge protection, ground settlement, and other challenges in coastal areas throughout the world. One of the goals towards reestablishing a healthy coastal ecosystem is to rebuild wetlands with river diversion or sediment conveyance projects that optimally manage and allocate sediments, minimally impact native flora and fauna, and positively affect the water quality. Engineering properties and material characteristics of the dredged material and foundation soils are input parameters in several mathematical models used to predict the long term behavior of the dredged material and foundation soil. Therefore, proper characterization of the dredged material and foundation soils is of utmost importance in the correct design of a coastal restoration and land reclamation project. The sedimentation and consolidation characteristics of the dredged material as well as their effects on the time rate of settlement of the suspended solid particles and underlying foundation soil depend, among other factors, on the (a) grain size distribution of the dredged material, (b) salinity (fresh, brackish, or saltwater environment) of the composite slurry, and (c) concentration of the solid particles in the slurry. This paper will present the results from column settling tests and self-weight consolidation tests performed on dredged samples obtained from actual restoration projects in Louisiana. The effects of salinity, grain size distribution, and initial particle concentration on the sedimentation and consolidation parameters of the dredged material will also be discussed.

  16. Action of peracetic acid on Escherichia coli and Staphylococcus aureus in suspension or settled on stainless steel surfaces

    Directory of Open Access Journals (Sweden)

    Kunigk Leo

    2001-01-01

    Full Text Available The efficiency of a commercial peracetic acid sanitizer on destruction of Staphylococcus aureus and Escherichia coli was evaluated using two distinct methods. The first method is the AOAC suspension test and the second is a method proposed by one of the authors in which the microbial cells are settled on a stainless steel surface and then treated with the sanitizer. The results showed that when in suspension S. aureus was more resistant to the sanitizer than E. coli. When S. aureus was settled on the stainless steel surface, the contact time between the sanitizer and the microorganisms to attain a 6.5 log reduction in the number of viable cells was three times greater than when the cells were in suspension.

  17. State and business co-operation in settling socio-economic issues: forward to sustainable development of ecologically unfavorable regions

    Science.gov (United States)

    Bashkirova, N. N.; Lessovaia, S. N.

    2018-01-01

    The complexity of socio-economic issues of mono-cities located in the ecologically unfavorable regions of Eurasia was disclosed. The economically strategic role of city-forming mining enterprises and their impact on ecological situation was revealed. The general conception of settling the socio-economic problems of mono-cities located in ecologically unfavorable regions was worked out. Various approached to the concentration of financial resources for economic and ecological sustainable development of the regions located on the north of Eurasia holding nature protection actions were submitted. Based on performed critical analysis of the positive international experience of ecological taxation some approaches to reforming current Russian system of ecological taxation were suggested. It was revealed that increasing the social responsibilities of business in the field of waste recycling, environmental protection and monitoring of ecological conditions of territories and state and business co-operation are the most efficient opportunities in settling socio-economic issues of ecologically unfavorable regions.

  18. Influence of tubificid worms on nutrient fluxes across water-sediment interface in fish farm settling ponds

    Directory of Open Access Journals (Sweden)

    Puigagut J.

    2014-04-01

    Full Text Available The influence of tubificid worms on nutrient translocation from water to fish farm sediments accumulating in settling ponds was addressed under laboratory conditions. Small microcosms of 0.5 L were filled up with 35 g of sludge from a fish farm settling pond and 0.15 L of filtered settling pond water. The experimental set up consisted of one control line (no worms added, a second experimental line with 1 mg of tubificid worms·g-1 fresh sediment (550 individuals·m-2 and a third experimental line with 40 mg of tubificid worms·g-1 fresh sediment (22 000 individuals·m-2. Nutrients translocation was determined by monitoring overlaying water concentration of ammonia, nitrate and phosphate for ten days. Results showed that abundances of 550 individuals·m-2 had no significant influence on the fluxes of nutrients here considered. However, the influence of higher abundances of tubificids (22 000 individuals·m-2 was of significant extent on the translocation of nitrate and phosphate. Accordingly, bioturbation of tubificids caused 55% lower nitrate uptake by the sediment when compared to control conditions. Phosphorus released by the sediments of the control condition was ca. 90% higher than that recorded under abundances of tubificids (22 000 individuals·m-2. Results obtained allowed us to estimate that fish farm settling ponds highly colonized by tubificid worms (22 000 individuals·m-2 may contribute to decrease phosphorus discharge (in terms of soluble phosphorus in ca. 5 g of P·ton-1 of fish produced.

  19. Elevated hair cortisol concentrations in recently fled asylum seekers in comparison to permanently settled immigrants and non-immigrants

    Science.gov (United States)

    Mewes, R; Reich, H; Skoluda, N; Seele, F; Nater, U M

    2017-01-01

    Recently fled asylum seekers generally live in stressful conditions. Their residency status is mostly insecure and, similar to other immigrants, they experience stress due to acculturation. Moreover, they often suffer from traumatization and posttraumatic stress disorder (PTSD). All of these factors can result in chronic maladaptive biological stress responses in terms of hyper- or hypocortisolism and, ultimately, illness. We believe the current study is the first to compare hair cortisol concentration (HCC) of recently fled asylum seekers with PTSD to those without PTSD, and to compare HCC of asylum seekers to HCC of permanently settled immigrants and non-immigrant individuals. HCC of the previous 2 months was compared between 24 asylum seekers without PTSD, 32 asylum seekers with PTSD, 24 permanently settled healthy Turkish immigrants and 28 non-immigrant healthy Germans as the reference group. Statistical comparisons were controlled for age, sex and body mass index. No significant difference in HCC was found between asylum seekers with and without PTSD. However, the asylum seekers showed a 42% higher HCC than the reference group. In contrast, the permanently settled immigrants exhibited a 23% lower HCC than the reference group. We found relative hypercortisolism in recently fled asylum seekers, but no difference between persons with and without PTSD. These findings add to the very few studies investigating HCC in groups with recent traumatization and unsafe living conditions. Contrary to the findings in asylum seekers, permanently settled immigrants showed relative hypocortisolism. Both hyper- and hypocortisolism may set the stage for the development of stress-related illnesses. PMID:28267148

  20. Concentrations of polycyclic aromatic hydrocarbons in resuspendable fraction of settled bus dust and its implications for human exposure

    International Nuclear Information System (INIS)

    Gao, Peng; Liu, Sa; Feng, Yujie; Lin, Nan; Lu, Binyu; Zhang, Zhaohan; Cui, Fuyi; Xing, Baoshan; Hammond, S. Katharine

    2015-01-01

    This preliminary study measured Polycyclic Aromatic Hydrocarbons (PAHs) concentrations in the resuspendable fraction of settled dust on 39 bus lines, to evaluate the impact of engine type (gasoline and compressed natural gas) on exposure for commuters and drivers. Benzo(b)fluoranthene(BbF) was the predominant PAH in resuspendable fraction of settled bus dust. The concentration of total PAHs was 92.90 ± 116.00 μg/g (range: 0.57–410) in gasoline buses and 3.97 ± 1.81 (range: 2.01–9.47) in compressed natural gas (CNG) buses. Based on Benzo[a]pyrene (BaP) equivalent concentrations for the sum of 16 PAHs, the average daily dose (ADD) via dust ingestion and dermal contact was calculated. The ADD of PAHs was higher for commuters and drivers in gasoline-powered buses than in buses using CNG buses. For both short and long duration journeys, young commuters were exposed to higher levels of PAHs via dust ingestion and dermal contact than adult commuters. - Highlights: • Resuspendable fraction of settled dust from microenvironment of buses in Harbin monitored for PAHs exposure assessment. • Higher levels of PAHs pollutants at gasoline-powered buses than at compressed natural gas-powered buses. • Non-occupational and occupational exposures in the microenvironment of buses are assessed. - Occupational and non-occupational exposure to PAHs from the microenvironment of bus

  1. Effects of oil dispersants on settling of marine sediment particles and particle-facilitated distribution and transport of oil components.

    Science.gov (United States)

    Cai, Zhengqing; Fu, Jie; Liu, Wen; Fu, Kunming; O'Reilly, S E; Zhao, Dongye

    2017-01-15

    This work investigated effects of three model oil dispersants (Corexit EC9527A, Corexit EC9500A and SPC1000) on settling of fine sediment particles and particle-facilitated distribution and transport of oil components in sediment-seawater systems. All three dispersants enhanced settling of sediment particles. The nonionic surfactants (Tween 80 and Tween 85) play key roles in promoting particle aggregation. Yet, the effects varied with environmental factors (pH, salinity, DOM, and temperature). Strongest dispersant effect was observed at neutral or alkaline pH and in salinity range of 0-3.5wt%. The presence of water accommodated oil and dispersed oil accelerated settling of the particles. Total petroleum hydrocarbons in the sediment phase were increased from 6.9% to 90.1% in the presence of Corexit EC9527A, and from 11.4% to 86.7% for PAHs. The information is useful for understanding roles of oil dispersants in formation of oil-sediment aggregates and in sediment-facilitated transport of oil and PAHs in marine eco-systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. The role of settling velocity formulation in the determination of gully pot trapping efficiency: comparison between analytical and experimental data.

    Science.gov (United States)

    Ciccarello, Annalisa; Bolognesi, Andrea; Maglionico, Marco; Artina, Sandro

    2012-01-01

    Roadside gully pots are the connecting points between surface runoff and the underground drainage network; therefore they can be considered as the most superficial component of urban drainage systems. Gully pots are supposed to trap particulate matter washed off the catchment surface, but also to collect and convey stormwater into the network. The continuous accumulation of particulate matter results in a progressive loss of the gully pot hydraulic conveyance, thereby increasing the probability of urban flooding during rainstorm events. This study has therefore the objective to determine which variables influence the gully pot capability of retaining solids (efficiency), both experimentally and analytically. Several laboratory tests have been performed on a simple plastic gully pot, with different inflow rates and using both mono and hetero-disperse particle samples. Particular attention has been given to the influence exerted by the way particle settling velocity is expressed: efficiency has been analytically determined by means of multiple settling velocity formulas proposed by various authors and eventually compared to experimental data. Results deriving from the adoption of each single settling velocity formula have been extensively analysed, showing fairly different outcomes.

  3. 210Pb and Mass Flux Imbalance Between the Settling Particulates and Sediments at a Sediment Trap

    Science.gov (United States)

    Wu, C.; Chung, Y.; Hung, G.

    2005-05-01

    In order to evaluate the mass balance problems between the settling particulates and the underlying sediments, sediment traps were deployed at M1 site (21o32¡¦N, 119o28¡¦E; 2948m) where a box core was taken recently. The sediment trap results were previously published (Chung et al., 2004: Continental Shelf Research). We report here the 210Pb profile measured on this box core by determining its daughter, 210Po, with alpha spectrometry, assuming the paired nuclides are in radioactive equilibrium. The box core (33 cm long, taken in June, 2004) was analyzed for the distributions of its water content, loss on ignition (LOI), and 210Pb. The water content decreases with depth and averages about 55 percent; the LOI as a measure of the total organic matter (TOM) is fairly constant at about 12 percent. The 210Pb profile shows a general exponential decrease with depth, yielding a maximum sedimentation rate of 0.26cm/y, applying a constant flux and constant sedimentation rate model. This rate translates to a mass flux of 0.31g/cm2/y or about 8.5g/m2/d with a dry bulk density of 1.2g/cm3. Based on the excess 210Pb inventory integrated over the core length, the 210Pb flux is estimated at about 19.2dpm/cm2/y or 526dpm/cm2/d assuming at steady state. The 210Pb and mass fluxes obtained from the deepest trap at M1 were only 129dpm/m2/d and 0.55g/m2/d, respectively. The large ¡excess¡" of the 210Pb and mass fluxes in the sediments over those measured from the sediment trap (4 times in 210Pb flux and 14 times in mass flux) suggests either the sedimentation rate was overestimated due to neglect of the mixing effect, and/or large additional particulates, as resuspended sediments which contain less 210Pb, have been transported laterally near the bottom from elsewhere.

  4. Comparison of the 1D flux theory with a 2D hydrodynamic secondary settling tank model.

    Science.gov (United States)

    Ekama, G A; Marais, P

    2004-01-01

    The applicability of the 1D idealized flux theory (1DFT) for design of secondary settling tanks (SSTs) is evaluated by comparing its predicted maximum surface overflow (SOR) and solids loading (SLR) rates with that calculated from the 2D hydrodynamic model SettlerCAD using as a basis 35 full scale SST stress tests conducted on different SSTs with diameters from 30 to 45m and 2.25 to 4.1 m side water depth, with and without Stamford baffles. From the simulations, a relatively consistent pattern appeared, i.e. that the 1DFT can be used for design but its predicted maximum SLR needs to be reduced by an appropriate flux rating, the magnitude of which depends mainly on SST depth and hydraulic loading rate (HLR). Simulations of the sloping bottom shallow (1.5-2.5 m SWD) Dutch SSTs tested by STOWa and the Watts et al. SST, all with doubled SWDs, and the Darvill new (4.1 m) and old (2.5 m) SSTs with interchanged depths, were run to confirm the sensitivity of the flux rating to depth and HLR. Simulations with and without a Stamford baffle were also done. While the design of the internal features of the SST, such as baffling, have a marked influence on the effluent SS concentration for underloaded SSTs, these features appeared to have only a small influence on the flux rating, i.e. capacity, of the SST, In the meantime until more information is obtained, it would appear that from the simulations so far that the flux rating of 0.80 of the 1DFT maximum SLR recommended by Ekama and Marais remains a reasonable value to apply in the design of full scale SSTs--for deep SSTs (4 m SWD) the flux rating could be increased to 0.85 and for shallow SSTs (2.5 m SWD) decreased to 0.75. It is recommended that (i) while the apparent interrelationship between SST flux rating and depth suggests some optimization of the volume of the SST, that this be avoided and that (ii) the depth of the SST be designed independently of the surface area as is usually the practice and once selected, the

  5. Understanding what helps or hinders asthma action plan use: a systematic review and synthesis of the qualitative literature.

    Science.gov (United States)

    Ring, Nicola; Jepson, Ruth; Hoskins, Gaylor; Wilson, Caroline; Pinnock, Hilary; Sheikh, Aziz; Wyke, Sally

    2011-11-01

    To understand better what helps and/or hinders asthma action plan use from the professionals and patients/carers perspective. Systematic review and qualitative synthesis (using meta-ethnography). Nineteen studies (20 papers) were included in an analysis of patients/carers' and professionals' views. Seven main influences on action plan implementation were identified including perceived un-helpfulness and irrelevance of the plans. Translation and synthesis of the original authors' interpretations suggested that action plan promotion and use was influenced by professional and patient/carers' asthma beliefs and attitudes and patient/carer experiences of managing asthma. Action plan use is hindered because professionals and patients/carers have different explanatory models of asthma, its management and their respective roles in the management process. Patients/carers, based on their experiential knowledge of their condition, perceive themselves as capable, effective in managing their asthma, but health professionals do not always share this view. Professionally provided medically focused action plans that do not 'fit' with and incorporate the patients'/carers' views of asthma, and their management strategies, will continue to be under-utilised. Professionals need to develop a more patient-centred, partnership-based, approach to the joint development and review of action plans, recognising the experiential asthma knowledge of patients/carers. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  6. Factors that hinder community participation in developing and implementing comprehensive council health plans in Manyoni District, Tanzania

    Directory of Open Access Journals (Sweden)

    Emmanuel G. Kilewo

    2015-06-01

    Full Text Available Background: Decentralization of public health planning is proposed to facilitate public participation in health issues. Health Sector Reform in Tanzania places emphasis on the participation of lower level health facilities and community in health planning process. Despite availability of policies, guidelines, and community representative organs, actual implementation of decentralization strategies is poorly achieved. This study intended to find out factors that hinder community participation in developing and implementing Comprehensive Council Health Plan (CCHP. Materials and methods: A qualitative approach was conducted in this study with key informants from Health Facility Governing Committees (HFGC, Council Health Service Board (CHSB, and Council Health Management Team (CHMT. Data were collected using in-depth interviews. Data generated were analyzed for themes and patterns. Results: Factors that hindered community participation included lack of awareness on the CCHP among HFGC members, poor communication and information sharing between CHMT and HFGC, unstipulated roles and responsibilities of HFGC, lack of management capacity among HFGC members, and lack of financial resources for implementing HFGC activities. Conclusions: The identified challenges call for policy makers to revisit the decentralization by devolution policy by ensuring that local governance structures have adequate resources as well as autonomy to participate in planning and managing CCHP in general and health facility plans in particular.

  7. Factors associated with mental disorders in long-settled war refugees: refugees from the former Yugoslavia in Germany, Italy and the UK

    NARCIS (Netherlands)

    Bogic, M.; Ajdukovic, D.; Bremner, S.; Franciskovic, T.; Galeazzi, G.M.; Kucukalic, A.; Lecic-Tosevski, D.; Morina, N.; Popovski, M.; Schützwohl, M.; Wang, D.; Priebe, S.

    2012-01-01

    Background Prevalence rates of mental disorders are frequently increased in long-settled war refugees. However, substantial variation in prevalence rates across studies and countries remain unexplained. Aims To test whether the same sociodemographic characteristics, war experiences and

  8. Hindering factors and suggestions related to organ donation decisions: perspective of the Taiwan Ali-Shan Tsou aboriginal tribe.

    Science.gov (United States)

    Chen, A N; Chen, K F; Chang, P C; Shih, F Jong; Chen, C R; Shih, F-Jin; Huang, C-Y

    2014-05-01

    Ali-San Tsou (AST) is one of leading aboriginal tribes in Taiwan with traditional godly beliefs related to life and death. Lacking related knowledge, health professionals (HPs) often failed to help them reach good dying or organ donation (OD). This study aimed to explore hindering factors and suggestions related to OD for good dying from Taiwan AST's own perspective. An explorative qualitative design was employed using a purposive sample of the AST tribes from Taiwan. Data were collected with AST residents by face-to-face interviews and analyzed by content analysis. Thirty AST residents (16 females and 14 males) with ages ranging from 28 to 78 (mean, 54.5) years completed interviews. Of them, 85% reported various diseases. In this study 73% were Catholics and Christians, 17% held traditional godly believes, and 10% had no religious affiliation. Eight hindering factors were reported: (1) limited information about organs and OD; (2) no qualified organs for donation; (3) worry about lack of forgiveness by ancestors; (4) tribe elders who might not accept concept of OD; (5) intact bodies were required at home during spirit-companion rituals; (6) earth burial with intact bodies was preferred; (7) bodies due to accidental and bad death were impermissible for OD; and (8) worry about possession by the donor's spirit. Seven suggestions were also reported for HPs to enhance AST's OD decisions: (1) starting with friendship and a caring relationship; (2) providing spiritual support from reverent religions; (3) stressing good deeds and honoring tribe folks by OD; (4) avoiding accidental/bad death; (5) providing relevant modern medical knowledge of human organs and OD; (6) introducing OD as part of a good-dying care plan; and (7) demonstrating a respectful discussion mindset about OD. Eight hindering factors and 7 types of suggestions for enhancing AST aboriginal people's OD decisions were first explored in this project. In the future, HPs are encouraged to invite AST to share

  9. Wave actions and topography determine the small-scale spatial distribution of newly settled Asari clams Ruditapes philippinarum on a tidal flat

    Science.gov (United States)

    Nambu, Ryogen; Saito, Hajime; Tanaka, Yoshio; Higano, Junya; Kuwahara, Hisami

    2012-03-01

    There are many studies on spatial distributions of Asari clam Ruditapes philippinarum adults on tidal flats but few have dealt with spatial distributions of newly settled Asari clam (physical/topographical conditions on tidal flats. We examined small-scale spatial distributions of newly settled individuals on the Matsunase tidal flat, central Japan, during the low spring tides on two days 29th-30th June 2007, together with the shear stress from waves and currents on the flat. The characteristics of spatial distribution of newly settled Asari clam markedly varied depending on both of hydrodynamic and topographical conditions on the tidal flat. Using generalized linear models (GLMs), factors responsible for affecting newly settled Asari clam density and its spatial distribution were distinguished between sampling days, with "crest" sites always having a negative influence each on the density and the distribution on both sampling days. The continuously recorded data for the wave-current flows at the "crest" site on the tidal flat showed that newly settled Asari clam, as well as bottom sediment particles, at the "crest" site to be easily displaced. Small-scale spatial distributions of newly settled Asari clam changed with more advanced benthic stages in relation to the wave shear stress.

  10. Settling and growth of D. polymorpha in the raw water circuits of the Cattenom nuclear power plant (Moselle, France)

    International Nuclear Information System (INIS)

    Moreteau, J.C.; Khalanski, M.

    1994-05-01

    A''biological profile'' of the zebra mussels which are infesting certain circuits of the Cattenom nuclear power plant has been provided by data collected during a three-year measurement programme (1991-1993). The larval settlement periods and the growth of settled mussels were monitored. A simple mathematical model, which calculates the shell growth on the long term, was calibrated with the field data. It is based on three functions representing the effect of the initial size, water temperature and fool availability (plankton chlorophyll a). (authors). 13 refs., 7 figs., 4 tabs

  11. U- and Th-series nuclides in settling particles: implications to sediment transport through surface waters and interior ocean

    International Nuclear Information System (INIS)

    Sarin, M.M.

    2012-01-01

    The Bay of Bengal is a unique ocean basin receiving large quantities of fresh water and sediment supply from several rivers draining the Indian subcontinent. The annual flux of suspended sediments discharged into the Bay of Bengal is one billion tons, about one-tenth of the global sediment discharge into the ocean. The water and sediment discharge to the Bay, show significant seasonal variation, with maximum transport coinciding with the SW-monsoon (July-September). Earlier studies on the distribution of clay minerals in sediments have led to the suggestion that the sediments of the western Bengal Fan are mainly derived from the Peninsular rivers, whereas rest of the Fan sediments is influenced by the Himalayan rivers. Settling fluxes of particulate matter through the water column of the Bay of Bengal show seasonal trends resulting from monsoon enhanced sediment supply via rivers and biological processes in the water column. It is, thus, important to understand the influence of the seasonally varying particle fluxes on the solute-particle interactions and chemical scavenging processes in the surface and deep waters of the Bay of Bengal. In this context, measurements of U- and Th-series nuclides in the settling particles are most relevant. The radionuclide fluxes ( 230 Th, 228 Th and 210 Pb) in the settling particles provide insight into the role of their removal by vertical particle flux and/or lateral transport (removal at the ocean boundaries). A study carried out in the Northern Bay of Bengal documents that the authigenic flux of 230 Th, as measured in sediment trap samples from deep waters, is balanced by its production in the overhead water column. The sediment mass flux, Al and 228 Th fluxes are similar in the settling particles through shallow and deep waters, suggesting predominant removal by vertical particle flux in the North Bay of Bengal. In the Central Bay, particulate mass, Al and 228 Th fluxes are higher in the trap material from deep waters relative

  12. Findings from a prospective cohort study evaluating the effects of International Health Advisors’ work on recently settled migrants’ health

    Directory of Open Access Journals (Sweden)

    Susanne Sundell Lecerof

    2017-04-01

    Full Text Available Abstract Background Several interventions have been carried out to tackle health inequalities between migrant groups, especially refugees, and native-born European populations. These initiatives are often address language or cultural barriers. One of them is the International Health Advisors (IHA in Sweden; a peer education intervention aimed at providing health information for recently settled migrants. It is known that social determinants, such as educational level and access to social capital, affect health. Social determinants may also affect how health information is received and transformed into practice. The aims of this study was to a assess the impact of the IHA on recently settled migrants’ self-reported health status, and received health information; b determine the moderating role of educational level and social capital; and c critically discuss the outcomes and suggest implications for health promotion practice. Methods The study was designed as a prospective cohort study. A postal questionnaire translated to Arabic was sent to recently settled Iraqi migrants in eight counties in Sweden, in May 2008 and May 2010. Two of the counties were exposed to the intervention, and six were used as references. Results The proportion of individuals who reported that they had received information on healthy diet and physical exercise was higher in the intervention group than in the non-intervention group (OR 2.31, 95% CI 1.02–5.22, after adjustments. Low social participation was negatively associated with deteriorated or unchanged health needs (OR 0.47, 95% CI 0.24–0.92. No other statistically significant differences in health outcomes could be observed between the groups. No signs of effect modification on this association by social capital or educational level could be found. Conclusions Health information provided by the IHA increased self-reported level of knowledge on healthy diet and physical exercise. The interpretation of the

  13. Findings from a prospective cohort study evaluating the effects of International Health Advisors' work on recently settled migrants' health.

    Science.gov (United States)

    Lecerof, Susanne Sundell; Stafström, Martin; Emmelin, Maria; Westerling, Ragnar; Östergen, Per-Olof

    2017-04-28

    Several interventions have been carried out to tackle health inequalities between migrant groups, especially refugees, and native-born European populations. These initiatives are often address language or cultural barriers. One of them is the International Health Advisors (IHA) in Sweden; a peer education intervention aimed at providing health information for recently settled migrants. It is known that social determinants, such as educational level and access to social capital, affect health. Social determinants may also affect how health information is received and transformed into practice. The aims of this study was to a) assess the impact of the IHA on recently settled migrants' self-reported health status, and received health information; b) determine the moderating role of educational level and social capital; and c) critically discuss the outcomes and suggest implications for health promotion practice. The study was designed as a prospective cohort study. A postal questionnaire translated to Arabic was sent to recently settled Iraqi migrants in eight counties in Sweden, in May 2008 and May 2010. Two of the counties were exposed to the intervention, and six were used as references. The proportion of individuals who reported that they had received information on healthy diet and physical exercise was higher in the intervention group than in the non-intervention group (OR 2.31, 95% CI 1.02-5.22), after adjustments. Low social participation was negatively associated with deteriorated or unchanged health needs (OR 0.47, 95% CI 0.24-0.92). No other statistically significant differences in health outcomes could be observed between the groups. No signs of effect modification on this association by social capital or educational level could be found. Health information provided by the IHA increased self-reported level of knowledge on healthy diet and physical exercise. The interpretation of the observed negative association between low social participation and

  14. Dependency links can hinder the evolution of cooperation in the prisoner's dilemma game on lattices and networks.

    Directory of Open Access Journals (Sweden)

    Xuwen Wang

    Full Text Available Networks with dependency links are more vulnerable when facing the attacks. Recent research also has demonstrated that the interdependent groups support the spreading of cooperation. We study the prisoner's dilemma games on spatial networks with dependency links, in which a fraction of individual pairs is selected to depend on each other. The dependency individuals can gain an extra payoff whose value is between the payoff of mutual cooperation and the value of temptation to defect. Thus, this mechanism reflects that the dependency relation is stronger than the relation of ordinary mutual cooperation, but it is not large enough to cause the defection of the dependency pair. We show that the dependence of individuals hinders, promotes and never affects the cooperation on regular ring networks, square lattice, random and scale-free networks, respectively. The results for the square lattice and regular ring networks are demonstrated by the pair approximation.

  15. What community characteristics help or hinder rural communities in becoming age-friendly? Perspectives from a Canadian prairie province.

    Science.gov (United States)

    Spina, John; Menec, Verena H

    2015-06-01

    Age-friendly initiatives are increasingly promoted as a policy solution to healthy aging, The primary objective of this article was to examine older adults' and key stakeholders' perceptions of the factors that either help or hinder a community from becoming age-friendly in the context of rural Manitoba, a Canadian prairie province. Twenty-four older adults and 17 key informants completed a qualitative interview. The findings show that contextual factors including size, location, demographic composition, ability to secure investments, and leadership influence rural communities' ability to become age-friendly. Government must consider the challenges these communities face in becoming more age-friendly and develop strategies to support communities. © The Author(s) 2013.

  16. Effect of montmorillonite on carboxylated styrene butadiene rubber/hindered phenol damping material with improved extraction resistance

    International Nuclear Information System (INIS)

    Gao, Yuan; Wang, Xiaoping; Liu, Meijun; Xi, Xue; Zhang, Xin; Jia, Demin

    2014-01-01

    Highlights: • MMT and XSBR display synergic effect on protecting HP1098 from being extracted. • A new hindered phenol HP1098 was used to prepare damping material. • Effects of three preparation methods on the material properties were studied. - Abstract: Three methods of blending, including direct blending, melt blending and latex blending, were introduced to disperse sodium based montmorillonite (Na-MMT) and N,N′-hexane-1,6-diylbis{3-(5-di-tert-butyl-4-hydroxyphenyl-propionamide)} (HP1098) into the carboxylated styrene butadiene (XSBR) matrix. Small angle X-ray Diffraction testing indicated that melting Na-MMT with HP1098 enlarged the d-spacing of Na-MMT, which was further enlarged by mechanical blending with XSBR, and this led to homogeneous dispersion of Na-MMT and HP1098, which was indicated by Transmission Electronic Microscopy; latex blending was found most advantageous in dispersing HP1098 which was essential for improved damping performance. Dynamic Mechanical Analysis was utilized to characterize damping properties, and enhanced static mechanical properties were presumably originated from molecule chains being intercalated into the enlarged galleries of Na-MMT by mechanical blending. Formation of hydrogen bonds was observed by Fourier Transformation Infrared Spectrum and was supposed to be responsible for exceptional damping performance at elevated temperature. Extraction measurement of XSBR/Na-MMT/HP1098 composite indicated that XSBR and Na-MMT showed synergic effect in protecting HP1098 molecules from being extracted, which is a promising method in preparing rubber/hindered phenol damping materials with improved extraction resistance, whereby increasing the performance stability and lifespan of the composite materials. Additional advantage of this type of materials is better processability and shortened vulcanization process

  17. Sterically hindered solvent extractants

    International Nuclear Information System (INIS)

    Solka, J.L.; Reis, A.H. Jr.; Mason, G.W.; Lewey, S.M.; Peppard, D.F.

    1978-01-01

    Di-t-pentylphosphinic acid, [C(CH 3 ) 2 (CH 2 CH 3 )] 2 PO(OH), H[Dt-PeP], has been shown by single-crystal X-ray diffraction data to be dimeric in the solid state. H[Dt-PeP] crystallizes in the centro-symmetric orthorhombic space group, Cmca, with unit cell parameters, a = 17.694(7), b = 11.021(4), and c = 13.073(5) A, and Z = 8, indicating that the molecule must conform to a crystallographic mirror plane or 2-fold axis. A measured density of 1.088 g/cm 3 is in good agreement with a calculated value of 1.074 g/cm 3 for a unit cell volume of 2549.3(A) 3 and a formula weight of 206.25 g. A total of 646 three-dimensional X-ray data were collected on an automated XRD-490 G.E. diffractometer. The structure was solved using a combination of direct methods, Patterson, Fourier, and least-squares refinement techniques. Refinement of the data indicates that H[Dt-PeP] is dimeric, and contains a mirror plane in which the hydrogen-bonded, eight-membered ring lies. A structural disorder involving principally the ethylene carbon but affecting the methyl carbons as well precluded a precise determination of the carbon positions and severely reduced the precision of the final refinement. In the liquid-liquid extraction system consisting of a solution of H[Dt-PeP] in benzene vs an acidic aqueous chloride phase, the extraction of UO 2 2+ follows the stoichiometry: UO 2 sub(A) 2+ + 2(HY) 2 subO = UO 2 (HY 2 ) 2 sub(O) + 2Hsub(A) + where (HY) 2 represents the dimer of H[Dt-PeP] and A and O represent the mutually equilibrated aqueous and organic phases. The expression for the distribution ratio, k, for UO 2 2+ is given. (author)

  18. When Trauma Hinders Learning

    Science.gov (United States)

    Barr, Donald A.

    2018-01-01

    Many kindergarten teachers have encountered children who enter school lacking the ability to control their behavior, but they may not understand the social and biological processes behind these children's disruptive behavior. The author reviews research into early childhood brain development to explain how trauma and chronic stress can make it…

  19. Where to settle--settlement preferences of Mytilus galloprovincialis and choice of habitat at a micro spatial scale.

    Directory of Open Access Journals (Sweden)

    Christina Carl

    Full Text Available The global mussel aquaculture industry uses specialised spat catching and nursery culture ropes made of multi-filament synthetic and natural fibres to optimise settlement and retention of mussels for on-growing. However, the settlement ecology and preferences of mussels are poorly understood and only sparse information exists in a commercial context. This study quantified the settlement preferences of pediveligers and plantigrades of Mytilus galloprovincialis on increasingly complex surfaces and settlement locations at a micro spatial scale on and within ropes under commercial hatchery operating conditions using optical microscopy and X-ray micro-computed tomography (µCT. M. galloprovincialis has clear settlement preferences for more complex materials and high selectivity for settlement sites from the pediveliger through to the plantigrade stage. Pediveligers of M. galloprovincialis initially settle inside specialised culture ropes. Larger pediveligers were located close to the exterior of ropes as they increased in size over time. In contrast, smaller individuals were located deeper inside of the ropes over time. This study demonstrates that X-ray µCT is an excellent non-destructive technique for mapping settlement and attachment sites of individuals as early as one day post settlement, and quantifies the number and location of settled individuals on and within ropes as a tool to understand and optimise settlement in complex multi-dimensional materials and environments.

  20. Chlorotic feeding injury by the black pecan aphid (hemiptera: aphididae) to pecan foliage promotes aphid settling and nymphal development.

    Science.gov (United States)

    Cottrell, Ted E; Wood, Bruce W; Ni, Xinzhi

    2009-04-01

    The nature of the interaction between the black pecan aphid, Melanocallis caryaefoliae (Davis) (Hemiptera: Aphididae), and the chlorosis it causes to foliage of its pecan [Carya illinoinensis (Wangenh.) K. Koch)] host is poorly understood. Laboratory experiments were conducted on the settling behavior of the black pecan aphid, when provided chlorotic pecan leaf discs resulting from previous black pecan aphid feeding and nonchlorotic leaf discs, under a normal photoperiod and constant dark. Additionally, aphid development from the first instar to the adult stage was examined when nymphs were either allowed to feed on the same leaf disc or moved daily to a new, nondamaged, same age leaf disc. After 24 h, a significantly higher percentage of black pecan aphids settled on chlorotic than on nonchlorotic leaf discs, regardless of photoperiod. When starting from the first instar, nymphs that were prevented from inducing leaf chlorosis by moving daily to new, same-age leaf discs took approximately 5 d longer to complete development, had a shorter body length, and had higher mortality than when aphids remained on the same leaf disc. These results show that black pecan aphid-induced leaf chlorosis plays an important role in the interaction of the black pecan aphid with its pecan host.

  1. Examination on rational disposal concept, layout, and methods of molding and settling for high level radioactive waste

    International Nuclear Information System (INIS)

    Toyota, Masatoshi

    1998-01-01

    As for the concept of disposing high level radioactive waste in the place of disposal, the method of securing safety by isolating the waste from human environment with the combination of artificial barriers and natural barriers has been adopted. At present in Japan, Power Reactor and Nuclear Fuel Development Corporation has considered the concept of disposal, but it is considered to be necessary to review it from the viewpoints of the uncertainty in safety characteristics, the possibility of realizing construction and settlement, economical efficiency and others. Recently, the investigation of the rational disposal concept has been advanced jointly with Dr. McKinley. The conditions to be considered for artificial barriers at the time of reviewing the disposal concept are described on bentonite buffer and carbon steel overpack enclosing glass-solidified body. As the disposal concept, the private plan of Toyota and that of Toyota and McKinley are shown. Also the layout for settling two modules each in horizontal adits on both sides of the connecting tunnel is proposed. The methods of molding and settling the engineered barrier system are explained. This disposal concept can reduce uncertainty, heighten safety and reduce the cost. (K.I.)

  2. Reynolds number and settling velocity influence for finite-release particle-laden gravity currents in a basin

    Science.gov (United States)

    Francisco, E. P.; Espath, L. F. R.; Laizet, S.; Silvestrini, J. H.

    2018-01-01

    Three-dimensional highly resolved Direct Numerical Simulations (DNS) of particle-laden gravity currents are presented for the lock-exchange problem in an original basin configuration, similar to delta formation in lakes. For this numerical study, we focus on gravity currents over a flat bed for which density differences are small enough for the Boussinesq approximation to be valid. The concentration of particles is described in an Eulerian fashion by using a transport equation combined with the incompressible Navier-Stokes equations, with the possibility of particles deposition but no erosion nor re-suspension. The focus of this study is on the influence of the Reynolds number and settling velocity on the development of the current which can freely evolve in the streamwise and spanwise direction. It is shown that the settling velocity has a strong influence on the spatial extent of the current, the sedimentation rate, the suspended mass and the shape of the lobe-and-cleft structures while the Reynolds number is mainly affecting the size and number of vortical structures at the front of the current, and the energy budget.

  3. On the design and operation of primary settling tanks in state of the art wastewater treatment and water resources recovery.

    Science.gov (United States)

    Patziger, Miklos; Günthert, Frank Wolfgang; Jardin, Norbert; Kainz, Harald; Londong, Jörg

    2016-11-01

    In state of the art wastewater treatment, primary settling tanks (PSTs) are considered as an integral part of the biological wastewater and sludge treatment process, as well as of the biogas and electric energy production. Consequently they strongly influence the efficiency of the entire wastewater treatment plant. However, in the last decades the inner physical processes of PSTs, largely determining their efficiency, have been poorly addressed. In common practice PSTs are still solely designed and operated based on the surface overflow rate and the hydraulic retention time (HRT) as a black box. The paper shows the results of a comprehensive investigation programme, including 16 PSTs. Their removal efficiency and inner physical processes (like the settling process of primary sludge), internal flow structures within PSTs and their impact on performance were investigated. The results show that: (1) the removal rates of PSTs are generally often underestimated in current design guidelines, (2) the removal rate of different PSTs shows a strongly fluctuating pattern even in the same range of the HRT, and (3) inlet design of PSTs becomes highly relevant in the removal efficiency at rather high surface overflow rates, above 5 m/h, which is the upper design limit of PSTs for dry weather load.

  4. Original analytical model of the hydrodynamic loads applied on the half-bridge of a circular settling tank

    Science.gov (United States)

    Oanta, Emil M.; Dascalescu, Anca-Elena; Sabau, Adrian

    2016-12-01

    The paper presents an original analytical model of the hydrodynamic loads applied on the half-bridge of a circular settling tank. The calculus domain is defined using analytical geometry and the calculus of the local dynamic pressure is based on the radius from the center of the settling tank to the current area, i.e. the relative velocity of the fluid and the depth where the current area is located, i.e. the density of the fluid. Calculus of the local drag forces uses the discrete frontal cross sectional areas of the submerged structure in contact with the fluid. In the last stage is performed the reduction of the local drag forces in the appropriate points belonging to the main beam. This class of loads is producing the flexure of the main beam in a horizontal plane and additional twisting moments along this structure. Taking into account the hydrodynamic loads, the results of the theoretical models, i.e. the analytical model and the finite element model, may have an increased accuracy.

  5. Concentrations of polycyclic aromatic hydrocarbons in resuspendable fraction of settled bus dust and its implications for human exposure.

    Science.gov (United States)

    Gao, Peng; Liu, Sa; Feng, Yujie; Lin, Nan; Lu, Binyu; Zhang, Zhaohan; Cui, Fuyi; Xing, Baoshan; Hammond, S Katharine

    2015-03-01

    This preliminary study measured Polycyclic Aromatic Hydrocarbons (PAHs) concentrations in the resuspendable fraction of settled dust on 39 bus lines, to evaluate the impact of engine type (gasoline and compressed natural gas) on exposure for commuters and drivers. Benzo(b)fluoranthene(BbF) was the predominant PAH in resuspendable fraction of settled bus dust. The concentration of total PAHs was 92.90 ± 116.00 μg/g (range: 0.57-410) in gasoline buses and 3.97 ± 1.81 (range: 2.01-9.47) in compressed natural gas (CNG) buses. Based on Benzo[a]pyrene (BaP) equivalent concentrations for the sum of 16 PAHs, the average daily dose (ADD) via dust ingestion and dermal contact was calculated. The ADD of PAHs was higher for commuters and drivers in gasoline-powered buses than in buses using CNG buses. For both short and long duration journeys, young commuters were exposed to higher levels of PAHs via dust ingestion and dermal contact than adult commuters. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Cow allergen (Bos d2) and endotoxin concentrations are higher in the settled dust of homes proximate to industrial-scale dairy operations.

    Science.gov (United States)

    Williams, D' Ann L; McCormack, Meredith C; Matsui, Elizabeth C; Diette, Gregory B; McKenzie, Shawn E; Geyh, Alison S; Breysse, Patrick N

    2016-01-01

    Airborne contaminants produced by industrial agricultural facilities contain chemical and biological compounds that can impact the health of residents living in close proximity. Settled dust can be a reservoir for these contaminants and can influence long-term exposures. In this study, we sampled the indoor- and outdoor-settled dust from 40 homes that varied in proximity to industrial-scale dairies (ISD; industrial-scale dairy, a term used in this paper to describe a large dairy farm and adjacent waste sprayfields, concentrated animal feeding operation or animal feeding operation, that uses industrial processes) in the Yakima Valley, Washington. We analyzed settled dust samples for cow allergen (Bos d2, a cow allergen associated with dander, hair, sweat and urine, it is a member of the lipocalin family of allergens associated with mammals), mouse allergen (Mus m1; major mouse allergen, a mouse urinary allergen, in the lipocalin family), dust mite allergens (Der p1 (Dermatophagoides pteronissinus 1) and Der f1 (Dermatophagoides farinae 1)), and endotoxin (a component of the cell walls of gram negative bacteria, lipopolysaccharide, which can be found in air and dust and can produce a strong inflammatory response). A concentration gradient was observed for Bos d2 and endotoxin measured in outdoor-settled dust samples based on proximity to ISD. Indoor-settled dust concentrations of Bos d2 and endotoxin were also highest in proximal homes. While the associated health effects of exposure to cow allergen in settled dust is unknown, endotoxin at concentrations observed in these proximal homes (100 EU/mg) has been associated with increased negative respiratory health effects. These findings document that biological contaminants emitted from ISDs are elevated in indoor- and outdoor-settled dust samples at homes close to these facilities and extend to as much as three miles (4.8 km) away.

  7. A test of the ADV-based Reynolds flux method for in situ estimation of sediment settling velocity in a muddy estuary

    Science.gov (United States)

    Cartwright, Grace M.; Friedrichs, Carl T.; Smith, S. Jarrell

    2013-12-01

    Under conditions common in muddy coastal and estuarine environments, acoustic Doppler velocimeters (ADVs) can serve to estimate sediment settling velocity ( w s) by assuming a balance between upward turbulent Reynolds flux and downward gravitational settling. Advantages of this method include simple instrument deployment, lack of flow disturbance, and relative insensitivity to biofouling and water column stratification. Although this method is being used with increasing frequency in coastal and estuarine environments, to date it has received little direct ground truthing. This study compared in situ estimates of w s inferred by a 5-MHz ADV to independent in situ observations from a high-definition video settling column over the course of a flood tide in the bottom boundary layer of the York River estuary, Virginia, USA. The ADV-based measurements were found to agree with those of the settling column when the current speed at about 40 cm above the bed was greater than about 20 cm/s. This corresponded to periods when the estimated magnitude of the settling term in the suspended sediment continuity equation was four or more times larger than the time rate of change of concentration. For ADV observations restricted to these conditions, ADV-based estimates of w s (mean 0.48±0.04 mm/s) were highly consistent with those observed by the settling column (mean 0.45±0.02 mm/s). However, the ADV-based method for estimating w s was sensitive to the prescribed concentration of the non-settling washload, C wash. In an objective operational definition, C wash can be set equal to the lowest suspended solids concentration observed around slack water.

  8. What factors hinder the decision-making process for women with cancer and contemplating fertility preservation treatment?

    Science.gov (United States)

    Jones, Georgina; Hughes, Jane; Mahmoodi, Neda; Smith, Emily; Skull, Jonathan; Ledger, William

    2017-07-01

    Although fertility preservation (FP) treatment options have increased, the existing evidence suggests that many women with cancer do not feel well supported in making these decisions, but find them stressful and complex and fail to take up fertility care at this crucial time. Whilst existing reviews have all made important contributions to our understanding of the FP decision-making process, none of them examine solely and specifically these processes for women of reproductive age with a diagnosis of any cancer, leaving a gap in the knowledge base. Given the expectation that care is patient-centred, our review aims to address this gap which may be of help to those managing patients struggling to make difficult decisions in the often brief period before potentially sterilizing cancer treatment is started. Underpinning this narrative review was the question 'What factors hinder the decision-making process for women with any cancer and contemplating FP treatment?' Our objectives were to (i) assess and summarize this existing literature, (ii) identify the factors that hinder this decision-making process, (iii) explore to what extent these factors may differ for women choosing different methods of FP and (iv) make recommendations for service delivery and future research. A systematic search of the medical and social science literature from the 1 January 2005 up to the end of January 2016 was carried out using three electronic databases (Web of Science (PubMed), Ovid SP Medline and CINAHL via Ebsco). Included in the review were quantitative, qualitative and mixed-method studies. Reference lists of relevant papers were also hand searched. From the 983 papers identified, 46 papers were included. Quality assessment was undertaken using the Mixed Methods Appraisal Tool and thematic analysis was used to analyse the data. From the analysis, 6 key themes with 15 sub-themes emerged: (i) fertility information provision (lack of information, timing of the information, patient

  9. Studi Numerik Karakterisasi Aliran 3 Dimensi Multifase (Gas-Solid Pada Gravity Settling Chamber Dengan Variasi Kecepatan Inlet Dan Diameter Partikel Pada Aliran Dilute Phase

    Directory of Open Access Journals (Sweden)

    Adi Mochammad Isa’i

    2013-09-01

    Full Text Available Kegiatan  pemilahan pada aktivitas produksi merupakan salah satu kegiatan yang banyak dilakukan pada dunia industri. Penggunaan gravity settling chamber merupakan teknologi pemilahan partikel yang paling sedehana dan murah. Maka dalam perancangan suatu gravity settling chamber perlu diketahui parameter yang mempengaruhi kinerja dari alat tersebut. Analisa karakteristik aliran pada gravity settling chamber dilakukan dengan metode simulasi numerik menggunakan persamaan Eularian-Lagrangian. Sebuah aliran multifase udara  dan partikel abu terbang batu bara (fly ashberdiameter 100 μm mengalir melalui sebuah  gravity settling chamber dengan variasi diameter hidrolis saluran inlet sebesar 1/3 1/5 dan 1/7  kali dari diameter hidrolis  ruang pengendap dengan laju kapasitas aliran yang sama . Selain divariasikan kecepatan inlet aliran, juga dilakukan variasi distribusi diameter dengan ukuran partikel kurang dari 50 μm, ukuran 50 -100 μm dan ukuran 100-200 μm.  Hasil yang didapatkan dari penelitian ini adalah semakin kecil ukuran diameter partikel maka akan efisiensi partikel yang ditangkap oleh gravity settling chamber semakin rendah. Ukuran partikel tidak berpengaruh terhadap posisi jatuh dari partikel tersebut. Semakin besar kecepatan inlet tidak memiliki hubungan dengan efisiensi penangkapan partikel. Pressure drop yang terjadi akan semakin besar sebanding dengan rasio perbandingan diameter hidrolis inlet dan ruang pengendapan, serta jumlah dan posisi secondary flow berperan signifikan pada efisiensi penangkapan partikel.

  10. What hinders teachers in using computer and video games in the classroom? Exploring factors inhibiting the uptake of computer and video games.

    Science.gov (United States)

    Baek, Young Kyun

    2008-12-01

    The purpose of this study is to identify factors inhibiting teachers' use of computer and video games in the classroom setting and to examine the degree to which teaching experience and gender affect attitudes toward using games. Six factors that hinder teachers' use of games in the classroom were discovered: Inflexibility of curriculum, Negative effects of gaming, Students' lack of readiness, Lack of supporting materials, Fixed class schedules, and Limited budgets. Lack of supporting material, Fixed class schedules, and Limited budgets were factors that female teachers believed to be more serious obstacles to game use in the classroom than male teachers did. Experienced teachers, more so than inexperienced teachers, believed that adopting games in teaching was hindered by Inflexibility of curriculum and Negative effects of gaming. On the other hand, inexperienced teachers, more so than experienced teachers, believed that adopting games in teaching is less hindered by Lack of supporting materials and Fixed class schedules.

  11. Anodal tDCS to Right Dorsolateral Prefrontal Cortex Facilitates Performance for Novice Jazz Improvisers but Hinders Experts

    Science.gov (United States)

    Rosen, David S.; Erickson, Brian; Kim, Youngmoo E.; Mirman, Daniel; Hamilton, Roy H.; Kounios, John

    2016-01-01

    Research on creative cognition reveals a fundamental disagreement about the nature of creative thought, specifically, whether it is primarily based on automatic, associative (Type-1) or executive, controlled (Type-2) processes. We hypothesized that Type-1 and Type-2 processes make differential contributions to creative production that depend on domain expertise. We tested this hypothesis with jazz pianists whose expertise was indexed by the number of public performances given. Previous fMRI studies of musical improvisation have reported that domain expertise is characterized by deactivation of the right-dorsolateral prefrontal cortex (r-DLPFC), a brain area associated with Type-2 executive processing. We used anodal, cathodal, and sham transcranial direct current stimulation (tDCS) applied over r-DLPFC with the reference electrode on the contralateral mastoid (1.5 mA for 15 min, except for sham) to modulate the quality of the pianists' performances while they improvised over chords with drum and bass accompaniment. Jazz experts rated each improvisation for creativity, esthetic appeal, and technical proficiency. There was no main effect of anodal or cathodal stimulation on ratings compared to sham; however, a significant interaction between anodal tDCS and expertise emerged such that stimulation benefitted musicians with less experience but hindered those with more experience. We interpret these results as evidence for a dual-process model of creativity in which novices and experts differentially engage Type-1 and Type-2 processes during creative production. PMID:27899889

  12. What hinder the further development of wind power in China?—A socio-technical barrier study

    International Nuclear Information System (INIS)

    Zhao, Zhen-Yu; Chang, Rui-Dong; Chen, Yu-Long

    2016-01-01

    Promoting wind power is a long-term strategy of China to respond to both energy shortage and environmental pollution. Stimulated by various incentive policies, wind power generation in China has achieved tremendous growth, with the cumulative installed capacity being the largest worldwide for five consecutive years since 2010. However, obstructed by various barriers, wind power provides only 2.6% of national electricity generation in China, despite the strong support from the government. From a socio-technical transition perspective, this paper aims to systematically analyze the barriers hindering the further development of China's wind power. A wind power niche model is established to illustrate the complex interactions among actors in the wind power industry and electricity supply regime. Then, qualitative content analysis is adopted to process the related evidence and data, and four categories of socio-technical barriers are identified, including technology, governance, infrastructure and culture barriers. The study shows that various interrelated barriers form a blocking mechanism which prohibits the further development of wind power in China. Policy suggestions are proposed to eliminate the barriers and further empower the wind power niche. The lesson learned from China can offer useful references for other economies to promote wind power industries of their own. - Highlights: • Use wind power niche model to illustrate the interactions among actors in the industry. • Analyze technological, governance, infrastructural and cultural barriers. • Multidimensionality and interconnectedness of the barriers are illustrated. • Policy suggestions are proposed to deal with the wind power development barriers.

  13. Antivertiginous drug therapy does not hinder the efficacy of individualized vibrotactile neurofeedback training for vestibular rehabilitation - a randomized trial.

    Science.gov (United States)

    Basta, Dietmar; Borsellino, Liliana; Ernst, Arne

    2017-12-01

    Vestibular rehabilitation using individualized vibrotactile neurofeedback training (IVNT) can lead to significant improvement in the postural stability of patients with vestibular symptoms of different origins. However, some of these patients have complex, severe dizziness, meaning that a pharmacological pretreatment or parallel (to vestibular rehabilitation) treatment can help them perform the rehabilitation exercises. Hence, the present study investigated the influence of a pharmacological treatment on the efficacy of vibrotactile neurofeedback training in patients with chronic, noncompensated vestibulopathies. All participants performed IVNT for ∼10 min each day for 2 weeks. In addition, every second participant was selected randomly to receive oral medication (20 mg cinnarizine and 40 mg dimenhydrinate per tablet), taking three tables per day. Trunk and ankle sway and postural stability were measured. In addition, the dizziness handicap inventory was evaluated immediately before training on the last day of training and 6 months after training. After the 10-day period of IVNT, both groups showed a statistically significant improvement in all parameters tested. A follow-up analysis after 6 months showed a long-term efficacy for the IVNT, that is, the patients remained significantly improved in their postural stability. The antivertiginous therapy did not hinder the efficacy of the IVNT. The present results indicate that IVNT even in combination with an antivertiginous drug therapy is an effective treatment regime for patients with disabling vertigo of different origins.

  14. Student Academic Performance: The Role of Motivation, Strategies, and Perceived Factors Hindering Liberian Junior and Senior High School Students Learning

    Directory of Open Access Journals (Sweden)

    Charles Gbollie

    2017-01-01

    Full Text Available The nature of motivation and learning strategy use is vital to improving student learning outcomes. This study was intended to explore the motivational beliefs and learning strategy use by Liberian junior and senior high school students in connection with their academic performance. It also solicited students’ self-reports about presumed factors hindering their learning. Utilizing a cross-sectional quantitative research design, 323 participants took part in the study from 2 counties. Motivated Strategies for Learning Questionnaire (MSLQ was adapted and 12 potential learning hindrances were identified and used as instruments. Data analyses were conducted using SPSS 17.0. The results showed the motivational belief component of extrinsic goal orientation as the most preferred belief and test anxiety was the least possessed belief. Rehearsal strategies were found to be the most frequently used, while help seeking was reported to be the least strategy considered. The result also showed significant relationships between the two constructs. In addition, the study found some learning hindrances. A number of conclusions as well as some practical recommendations for action relative to the improvement of student performance have been advanced.

  15. Anodal tDCS to Right Dorsolateral Prefrontal Cortex Facilitates Performance for Novice Jazz Improvisers but Hinders Experts.

    Science.gov (United States)

    Rosen, David S; Erickson, Brian; Kim, Youngmoo E; Mirman, Daniel; Hamilton, Roy H; Kounios, John

    2016-01-01

    Research on creative cognition reveals a fundamental disagreement about the nature of creative thought, specifically, whether it is primarily based on automatic, associative (Type-1) or executive, controlled (Type-2) processes. We hypothesized that Type-1 and Type-2 processes make differential contributions to creative production that depend on domain expertise. We tested this hypothesis with jazz pianists whose expertise was indexed by the number of public performances given. Previous fMRI studies of musical improvisation have reported that domain expertise is characterized by deactivation of the right-dorsolateral prefrontal cortex (r-DLPFC), a brain area associated with Type-2 executive processing. We used anodal, cathodal, and sham transcranial direct current stimulation (tDCS) applied over r-DLPFC with the reference electrode on the contralateral mastoid (1.5 mA for 15 min, except for sham) to modulate the quality of the pianists' performances while they improvised over chords with drum and bass accompaniment. Jazz experts rated each improvisation for creativity, esthetic appeal, and technical proficiency. There was no main effect of anodal or cathodal stimulation on ratings compared to sham; however, a significant interaction between anodal tDCS and expertise emerged such that stimulation benefitted musicians with less experience but hindered those with more experience. We interpret these results as evidence for a dual-process model of creativity in which novices and experts differentially engage Type-1 and Type-2 processes during creative production.

  16. The Role of Organisational Phenomena in Software Cost Estimation: A Case Study of Supporting and Hindering Factors

    Directory of Open Access Journals (Sweden)

    Jurka Rahikkala

    2018-01-01

    Full Text Available Despite the fact that many researchers and practitioners agree that organisational issues are equally important as technical issues from the software cost estimation (SCE success point of view, most of the research focus has been put on the development of methods, whereas organisational factors have received surprisingly little academic scrutiny. This study aims to identify organisational factors that either support or hinder meaningful SCE, identifying their impact on estimation success. Top management’s role is specifically addressed. The study takes a qualitative and explorative case study based approach. In total, 18 semi-structured interviews aided the study of three projects in three organisations. Hence, the transferability of the results is limited. The results suggest that the role of the top management is important in creating prerequisites for meaningful estimation, but their day-to-day participation is not required for successful estimation. Top management may also induce undesired distortion in estimation. Estimation maturity and estimation success seem to have an interrelationship with software process maturity, but there seem to be no significant individual organisational factors, which alone would make estimation successful. Our results validate several distortions and biases reported in the previous studies, and show the SCE research focus has remained on methodologies and technical issues.

  17. Systematic review and meta-analysis of factors that help or hinder treatment decision-making capacity in psychosis.

    Science.gov (United States)

    Larkin, Amanda; Hutton, Paul

    2017-10-01

    Background The evidence on factors that may influence treatment decisional capacity ('capacity') in psychosis has yet to be comprehensively synthesised, which limits the development of effective strategies to improve or support it. Aims To determine the direction, magnitude and reliability of the relationship between capacity in psychosis and a range of clinical, demographic and treatment-related factors, thus providing a thorough synthesis of current knowledge. Method We conducted a systematic review, meta-analytical and narrative synthesis of factors that help or hinder treatment decision-making capacity in psychosis, assessing the direction, magnitude, significance and reliability of reported associations. Results We identified 23 relevant studies ( n = l823). Psychotic symptoms had small, moderate and strong associations with appreciation, understanding and reasoning respectively. Both verbal cognitive functioning and duration of education had small to moderate correlations with understanding and reasoning. Better capacity was also associated with better insight, better metacognitive ability, higher anxiety and lower perceived coercion. No linear relationship with depression was observed. Interventions linked to improved capacity over time were in-patient care, information simplification, shared decision-making and metacognitive training. Conclusions Although much is known about the role of symptoms and other clinical variables, effective and acceptable psychological interventions to support capacity in this group are lacking. © The Royal College of Psychiatrists 2017.

  18. Anodal tDCS to right dorsolateral prefrontal cortex facilitates performance for novice jazz improvisers but hinders experts

    Directory of Open Access Journals (Sweden)

    David S Rosen

    2016-11-01

    Full Text Available Research on creative cognition reveals a fundamental disagreement about the nature of creative thought, specifically, whether it is primarily based on automatic, associative (Type-1 or executive, controlled (Type-2 processes. We hypothesized that Type-1 and Type-2 processes make differential contributions to creative production that depend on domain expertise. We tested this hypothesis with jazz pianists whose expertise was indexed by the number of public performances given. Previous fMRI studies of musical improvisation have reported that domain expertise is characterized by deactivation of the right-dorsolateral prefrontal cortex (r-DLPFC, a brain area associated with Type-2 executive processing. We used anodal, cathodal, and sham transcranial direct-current stimulation (tDCS applied over r-DLPFC with the reference electrode on the contralateral mastoid (1.5mA for 15 min., except for sham to modulate the quality of the pianists’ performances while they improvised over chords with drum and bass accompaniment. Jazz experts rated each improvisation for creativity, aesthetic appeal, and technical proficiency. There was no main effect of anodal or cathodal stimulation on ratings compared to sham; however, a significant interaction between anodal tDCS and expertise emerged such that stimulation benefitted musicians with less experience but hindered those with more experience. We interpret these results as evidence for a dual-process model of creativity in which novices and experts differentially engage Type-1 and Type-2 processes during creative production.

  19. Kinetics and structure-activity relationship of dendritic bridged hindered phenol antioxidants to protect styrene against free radical induced peroxidation

    Science.gov (United States)

    Li, Cui-Qin; Guo, Su-Yue; Wang, Jun; Shi, Wei-Guang; Zhang, Zhi-Qiu; Wang, Peng-Xiang

    2017-12-01

    A series of dendritic poly(amido-amine) (PAMAM) bridged hindered phenols antioxidants were synthesized. The active antioxidant group (3-(3,5-di- tert-butyl-4-hydroxyphenyl)propionic acid) was attached to two generations of PAMAM dendrimers, and their structure was verified by nuclear magnetic resonance (NMR) and fourier transform infrared spectra (FT-IR). The antioxidant abilities of the dendritic phenols to inhibit the oxidation of styrene were evaluated and the relationships between the length of core, the generation of dendrimers and the antioxidant activities were established. The reaction kinetics of scavenging peroxyl radicals was followed by oxygen consumption. The inhibition time ( t inh) values showed the dendritic phenols had the ability of scavenging peroxyl radicals, and that the antioxidant ability increased with the increasing length of the core and the generation. The kinetic analysis demonstrated that dendritic phenols could slow the rate of styrene peroxidation induced by AIBN, as shown by the number of trapping ROO· ( n), and this role was in accordance with that of the t inh values.

  20. Ward social workers' views of what facilitates or hinders collaboration with specialist palliative care team social workers: A grounded theory.

    Science.gov (United States)

    Firn, Janice; Preston, Nancy; Walshe, Catherine

    2017-07-14

    Inpatient, generalist social workers in discharge planning roles work alongside specialist palliative care social workers to care for patients, often resulting in two social workers being concurrently involved in the same patient's care. Previous studies identifying components of effective collaboration, which impacts patient outcomes, care efficiency, professional job satisfaction, and healthcare costs, were conducted with nurses and physicians but not social workers. This study explores ward social workers' perceptions of what facilitates or hinders collaboration with palliative care social workers. Grounded theory was used to explore the research aim. In-depth qualitative interviews with masters trained ward social workers (n = 14) working in six hospitals located in the Midwest, United States were conducted between February 2014 and January 2015. A theoretical model of ward social workers' collaboration with palliative care social workers was developed. The emerging model of collaboration consists of: 1) trust, which is comprised of a) ability, b) benevolence, and c) integrity, 2) information sharing, and 3) role negotiation. Effective collaboration occurs when all elements of the model are present. Collaboration is facilitated when ward social workers' perceptions of trust are high, pertinent information is communicated in a time-sensitive manner, and a flexible approach to roles is taken. The theoretical model of collaboration can inform organisational policy and social work clinical practice guidelines, and may be of use to other healthcare professionals, as improvements in collaboration among healthcare providers may have a positive impact on patient outcomes.

  1. Limits on same-day billing in Medicaid hinders integration of behavioral health into the medical home model.

    Science.gov (United States)

    Roby, Dylan H; Jones, Erynne E

    2016-02-01

    The potential expansion of insurance coverage through the Patient Protection and Affordable Care Act of 2010 can facilitate the reduction of access barriers and improved quality for behavioral health care. More than 5 million of the newly insured are expected to have mental health and substance use disorders. In addition, state and federal efforts to integrate behavioral and medical health needs through patient-centered medical home models and innovations in payment strategies provide an unprecedented opportunity to use federal financial support to improve not only access to care, but also improve quality through active care coordination, use of interdisciplinary teams, colocating services, and engaging in warm hand-offs between providers in the same setting. These potential advances are hindered in 24 different states because of Medicaid payment policy, with 7 explicitly limiting the ability to reimburse for physical health and behavioral health services on the same day for all providers. Without the ability for providers to be reimbursed for different services on the same day to improve behavioral and medical health care coordination, these states could be limited in their ability to improve care via patient-centered approaches and interdisciplinary team-based care that would involve physicians, clinical psychologists, psychiatrists, and other mental health professionals. Limits on same-day billing in Medicaid programs could impact up to 36.7 million people in 24 states, which is approximately 52.6% of all Medicaid enrollees. (c) 2016 APA, all rights reserved).

  2. Analytical solution of settling behavior of a particle in incompressible Newtonian fluid by using Parameterized Perturbation Method

    Directory of Open Access Journals (Sweden)

    Reza Mohammadyari

    2015-08-01

    Full Text Available The problem of solid particle settling is a well known problem in mechanic of fluids. The parametrized Perturbation Method is applied to analytically solve the unsteady motion of a spherical particle falling in a Newtonian fluid using the drag of the form given by Oseen/Ferreira, for a range of Reynolds numbers. Particle equation of motion involved added mass term and ignored the Basset term. By using this new kind of perturbation method called parameterized perturbation method (PPM, analytical expressions for the instantaneous velocity, acceleration and position of the particle were derived. The presented results show the effectiveness of PPM and high rate of convergency of the method to achieve acceptable answers.

  3. Research on jet mixing of settled sludges in nuclear waste tanks at Hanford and other DOE sites: A historical perspective

    Energy Technology Data Exchange (ETDEWEB)

    Powell, M.R.; Onishi, Y.; Shekarriz, R.

    1997-09-01

    Jet mixer pumps will be used in the Hanford Site double-shell tanks to mobilize and mix the settled solids layer (sludge) with the tank supernatant liquid. Predicting the performance of the jet mixer pumps has been the subject of analysis and testing at Hanford and other U.S. Department of Energy (DOE) waste sites. One important aspect of mixer pump performance is sludge mobilization. The research that correlates mixer pump design and operation with the extent of sludge mobilization is the subject of this report. Sludge mobilization tests have been conducted in tanks ranging from 1/25-scale (3 ft-diameter) to full scale have been conducted at Hanford and other DOE sites over the past 20 years. These tests are described in Sections 3.0 and 4.0 of this report. The computational modeling of sludge mobilization and mixing that has been performed at Hanford is discussed in Section 5.0.

  4. Existence of both culturable and viable but non culturable (VNC) E. coli populations with distinct settling velocities in karst aquifer

    Science.gov (United States)

    Petit, F.; Ratajczak, M.; Massei, N.; Lafite, R.; Clermont, O.; Denamur, E.; Berthe, T.

    2012-12-01

    The karst aquifers are particularly vulnerable to contamination by faecal pathogens mainly during rainfall event. In groundwater, the fate of E. coli is dependent on their ability to overcome environmental stresses and on their association with particles. Moreover, some strains can survive leading to the emergence of a sub-population of E. coli which failed to grow on laboratory media, while they were still alive thus designated as viable but non culturable (VNC). The aim of this study was to investigate (i) the structure of culturable E. coli population based on the survival ability, the distribution in four main phylo-groups (A, B1, B2, D) and the phenotypic characteristics; and, (ii) the fate of culturable and VNC E. coli, according to their settling velocities. This work was carried out on a karstic workshop-site for which the microbial quality of water was impaired related to livestock density and septic tanks overflows. Particles characterisation was performed by estimation of their settling velocities combined with electronic microscopy observation, and solid phase cytometry (ChemScan®RDI) was carried out to quantify the viable E. coli, and thus VNC E. coli. In the karst, different populations of E. coli were coexisting related to their survival, their culturability, and their association to particles. At the sinkhole, during a rainfall event with pasture, E. coli rapidly losing their culturability after 2 days have been more frequently isolated. These isolates are mainly multiresistant to antibiotics and harbor several virulence factors. In the same time, a population of VNC E. coli (79%), associated to the "non settleable particles" (settling velocities ranging between 10-5 to 10-2 mm.s-1), mainly corresponding to colloids and organic or organo-mineral microflocs was injected in the karst system, probably corresponding to the runoff of attached-bacteria originating from cowpats. Once in the karst, the relative contribution of culturable and VNC E. coli

  5. Characterisation of raw sewage and performance assessment of primary settling tanks at Firle Sewage Treatment Works, Harare, Zimbabwe

    Science.gov (United States)

    Muserere, Simon Takawira; Hoko, Zvikomborero; Nhapi, Innocent

    The need for more stringent effluent discharge standards as prescribed by the Environmental Management Act 20:27 to protect the environment can be sustainably achieved with the aid of Activated Sludge Models. Thus, the researchers believe it is time to re-evaluate wastewater characteristics at Firle Sewage Treatment Works (STW) and make use of activated sludge simulators to address pollution challenges caused by the sewage plant. Therefore, this paper characterizes raw sewage and assesses settled and unsettled sewage in order to evaluate the performance of the primary treatment system and the suitability of the settled sewage for treatment by the subsequent Biological Nutrient Removal (BNR) system at Firle STW. Parameters studied included COD, BOD, TKN, TP, NH3, TSS, pH and Alkalinity. Composite samples were collected over a 9-day campaign period (27 June to 6 July 2012), hourly grab samples over 24 hrs and composite samples on 6 March 2012 which were then analysed in the lab in accordance with Standard Methods for the Examination of Water and Wastewater to support the City of Harare 2004-2012 lab historical records. Concentrations for unsettled sewage in mg/L were COD (527 ± 32), BOD (297 ± 83) TKN (19.0 ± 2.0), TP (18 ± 3), NH3 (24.0 ± 12.9), TSS (219 ± 57), while pH was 7.0 ± 0 and Alkalinity 266 ± 36 mg/L. For settled sewage the corresponding values in mg/L were COD (522 ± 15), BOD (324 ± 102), TKN (21.0 ± 3.0), TP (19.0 ± 2.0), NH3 (25.6 ± 11.2), TSS (250 ± 66), while pH was 7.0 ± 0 and Alkalinity 271 ± 17 mg/L. The plant design values for raw sewage are COD (650 mg/L), BOD (200 mg/L), TKN (40 mg/L) and TP (11 mg/L). Thus, COD and nitrogen were within the plant design range while BOD and TP were higher. Treatability of sewage in BNR systems is often inferred from the levels of critical parameters and also the ratios of TKN/COD and COD/TP. The wastewater average settled COD/BOD, COD/TP and TKN/COD ratio were 1.7 ± 0.5, 27.1 ± 3.1 and 0.04 ± 0

  6. Research on jet mixing of settled sludges in nuclear waste tanks at Hanford and other DOE sites: A historical perspective

    International Nuclear Information System (INIS)

    Powell, M.R.; Onishi, Y.; Shekarriz, R.

    1997-09-01

    Jet mixer pumps will be used in the Hanford Site double-shell tanks to mobilize and mix the settled solids layer (sludge) with the tank supernatant liquid. Predicting the performance of the jet mixer pumps has been the subject of analysis and testing at Hanford and other U.S. Department of Energy (DOE) waste sites. One important aspect of mixer pump performance is sludge mobilization. The research that correlates mixer pump design and operation with the extent of sludge mobilization is the subject of this report. Sludge mobilization tests have been conducted in tanks ranging from 1/25-scale (3 ft-diameter) to full scale have been conducted at Hanford and other DOE sites over the past 20 years. These tests are described in Sections 3.0 and 4.0 of this report. The computational modeling of sludge mobilization and mixing that has been performed at Hanford is discussed in Section 5.0

  7. Adapted to change: The rapid development of symbiosis in newly settled, fast-maturing chemosymbiotic mussels in the deep sea.

    Science.gov (United States)

    Laming, Sven R; Duperron, Sébastien; Gaudron, Sylvie M; Hilário, Ana; Cunha, Marina R

    2015-12-01

    Symbioses between microbiota and marine metazoa occur globally at chemosynthetic habitats facing imminent threat from anthropogenic disturbance, yet little is known concerning the role of symbiosis during early development in chemosymbiotic metazoans: a critical period in any benthic species' lifecycle. The emerging symbiosis of Idas (sensu lato) simpsoni mussels undergoing development is assessed over a post-larval-to-adult size spectrum using histology and fluorescence in situ hybridisation (FISH). Post-larval development shows similarities to that of both heterotrophic and chemosymbiotic mussels. Data from newly settled specimens confirm aposymbiotic, planktotrophic larval development. Sulphur-oxidising (SOX) symbionts subsequently colonise multiple exposed, non-ciliated epithelia shortly after metamorphosis, but only become abundant on gills as these expand with greater host size. This wide-spread bathymodiolin recorded from sulphidic wood, bone and cold-seep habitats, displays a suite of adaptive traits that could buffer against anthropogenic disturbance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Parking lot runoff quality and treatment efficiencies of a hydrodynamic-settling device in Madison, Wisconsin, 2005-6

    Science.gov (United States)

    Horwatich, Judy A.; Bannerman, Roger T.

    2012-01-01

    A hydrodynamic-settling device was installed in 2004 to treat stormwater runoff from a roof and parking lot located at the Water Utility Administration Building in Madison, Wis. The U.S. Geological Survey, in cooperation with the Wisconsin Department of Natural Resources, the City of Madison, cities in the Waukesha Permit Group, Hydro International, Earth Tech, Inc., National Sanitation Foundation International, and the U.S. Environmental Protection Agency, monitored the device from November 2005 through September 2006 to evaluate it as part of the U.S. Environmental Protection Agency's Environmental Technology Verification Program. Twenty-three runoff events monitored for flow volume and water quality at the device's inlet and outlet were used to calculate the percentage of pollutant reduction for the device. The geometric mean concentrations of suspended sediment (SS), "adjusted" total suspended solids (TSS), total phosphorus (TP), dissolved phosphorus (DP), total recoverable zinc (TZn), and total recoverable copper (TCu) measured at the inlet were 107 mg/L (milligrams per liter), 92 mg/L, 0.17 mg/L, 0.05 mg/L, 38 μg/L (micrograms per liter), and 12 μg/L, respectively, and these concentrations are in the range of values observed in stormwater runoff from other parking lots in Wisconsin and Michigan. Efficiency of the settling device was calculated using the efficiency ratio and summation of loads (SOL) methods. Using the efficiency ratio method, the device reduced concentrations of SS, and DP, by 19, and 15, percent, respectively. Using the efficiency ratio method, the device increased "adjusted" TSS and TZn concentrations by 5 and 19, respectively. Bypass occurred for 3 of the 23 runoff events used in this assessment, and the bypass flow and water-quality concentrations were used to determine the efficiency of the bypass system. Concentrations of SS, "adjusted" TSS, and DP were reduced for the system by 18, 5, and 18, respectively; however, TZn increased by 5

  9. DUST AND GAS IN THE DISK OF HL TAURI: SURFACE DENSITY, DUST SETTLING, AND DUST-TO-GAS RATIO

    Energy Technology Data Exchange (ETDEWEB)

    Pinte, C.; Ménard, F. [UMI-FCA, CNRS/INSU, France (UMI 3386), and Dept. de Astronomía, Universidad de Chile, Santiago (Chile); Dent, W. R. F.; Hales, A.; Hill, T.; Cortes, P.; Gregorio-Monsalvo, I. de, E-mail: christophe.pinte@obs.ujf-grenoble.fr [Atacama Large Millimeter/Submillimeter Array, Joint ALMA Observatory, Alonso de Córdova 3107, Vitacura 763-0355, Santiago (Chile)

    2016-01-01

    The recent ALMA observations of the disk surrounding HL Tau reveal a very complex dust spatial distribution. We present a radiative transfer model accounting for the observed gaps and bright rings as well as radial changes of the emissivity index. We find that the dust density is depleted by at least a factor of 10 in the main gaps compared to the surrounding rings. Ring masses range from 10–100 M{sub ⊕} in dust, and we find that each of the deepest gaps is consistent with the removal of up to 40 M{sub ⊕} of dust. If this material has accumulated into rocky bodies, these would be close to the point of runaway gas accretion. Our model indicates that the outermost ring is depleted in millimeter grains compared to the central rings. This suggests faster grain growth in the central regions and/or radial migration of the larger grains. The morphology of the gaps observed by ALMA—well separated and showing a high degree of contrast with the bright rings over all azimuths—indicates that the millimeter dust disk is geometrically thin (scale height ≈1 AU at 100 AU) and that a large amount of settling of large grains has already occurred. Assuming a standard dust settling model, we find that the observations are consistent with a turbulent viscosity coefficient of a few 10{sup −4}. We estimate the gas/dust ratio in this thin layer to be of the order of 5 if the initial ratio is 100. The HCO{sup +} and CO emission is consistent with gas in Keplerian motion around a 1.7 M{sub ⊙} star at radii from ≤10–120 AU.

  10. Real-time PCR detection of toxigenic Fusarium in airborne and settled grain dust and associations with trichothecene mycotoxins.

    Science.gov (United States)

    Halstensen, Anne Straumfors; Nordby, Karl-Christian; Eduard, Wijnand; Klemsdal, Sonja Sletner

    2006-12-01

    Inhalation of immunomodulating mycotoxins produced by Fusarium spp. that are commonly found in grain dust may imply health risks for grain farmers. Airborne Fusarium and mycotoxin exposure levels are mainly unknown due to difficulties in identifying Fusarium and mycotoxins in personal aerosol samples. We used a novel real-time PCR method to quantify the fungal trichodiene synthase gene (tri5) and DNA specific to F. langsethiae and F. avenaceum in airborne and settled grain dust, determined the personal inhalant exposure level to toxigenic Fusarium during various activities, and evaluated whether quantitative measurements of Fusarium-DNA could predict trichothecene levels in grain dust. Airborne Fusarium-DNA was detected in personal samples even from short tasks (10-60 min). The median Fusarium-DNA level was significantly higher in settled than in airborne grain dust (p dust (r(s) = 0.20, p = 0.003). Both F. langsethiae-DNA and tri5-DNA were associated with HT-2 and T-2 toxins (r(s) = 0.24-0.71, p dust, and could thus be suitable as indicators for HT-2 and T-2. The median personal inhalant exposure to specific toxigenic Fusarium spp. was less than 1 genome m(-3), but the exposure ranged from 0-10(5) genomes m(-3). This study is the first to apply real-time PCR on personal samples of inhalable grain dust for the quantification of tri5 and species-specific Fusarium-DNA, which may have potential for risk assessments of inhaled trichothecenes.

  11. What a difference a bay makes: natural variation in dietary resources mediates growth in a recently settled herbivorous fish

    Science.gov (United States)

    Priest, Mark A.; Halford, Andrew R.; Clements, Kendall D.; Douglas, Emily; Abellana, Sheena L.; McIlwain, Jennifer L.

    2016-12-01

    Processes acting during the early stages of coral reef fish life cycles have a disproportionate influence on their adult abundance and community structure. Higher growth rates, for example, confer a major fitness advantage in larval and juvenile fishes, with larger fish undergoing significantly less mortality. The role of dietary resources in the size-structuring process has not been well validated, especially at the early post-settlement phase, where competition and predation are seen as preeminent drivers of juvenile fish assemblage structure. Here, we report on a size differential of 10-20% between recently settled Siganus spinus rabbitfish recruits from different bays around the Pacific island of Guam. This difference was maintained across multiple recruitment events within and between years. After confirming the validity of our observations through otolith increment analysis, subsequent investigation into the drivers of this variation revealed significant differences in the structure of algal assemblages between bays, congruent with the observed differences in size of the recently settled fish. Gut analyses showed a greater presence of algal types with higher levels of nitrogen and phosphorus in the stomachs of fish from Tanguisson, the bay with the largest observed recruits. To ensure this mechanism was one of causation and not correlation, we conducted a fully factorial experiment in which S. spinus recruits sampled from different bays were reared on all combinations of algal diets representative of the different bays. Recruits on the `Tanguisson' diet grew faster than recruits on other diets, regardless of their origin. We propose that the greater availability of high-quality dietary resources at this location is likely conferring benefits that impact on the population-level dynamics of this species. The spatial and temporal extent of this process clearly implicates food as a limiting resource, capable of mediating fish population dynamics at multiple

  12. Development of a flocculation sub-model for a 3-D CFD model based on rectangular settling tanks.

    Science.gov (United States)

    Gong, M; Xanthos, S; Ramalingam, K; Fillos, J; Beckmann, K; Deur, A; McCorquodale, J A

    2011-01-01

    To assess performance and evaluate alternatives to improve the efficiency of rectangular Gould II type final settling tanks (FSTs), New York City Department of Environmental Protection and City College of NY developed a 3D computer model depicting the actual structural configuration of the tanks and the current and proposed hydraulic and solids loading rates. Fluent 6.3.26™ was the base platform for the computational fluid dynamics (CFD) model, for which sub-models of the SS settling characteristics, turbulence, flocculation and rheology were incorporated. This was supplemented by field and bench scale experiments to quantify the coefficients integral to the sub-models. The 3D model developed can be used to consider different baffle arrangements, sludge withdrawal mechanisms and loading alternatives to the FSTs. Flocculation in the front half of the rectangular tank especially in the region before and after the inlet baffle is one of the vital parameters that influences the capture efficiency of SS. Flocculation could be further improved by capturing medium and small size particles by creating an additional zone with an in-tank baffle. This was one of the methods that was adopted in optimizing the performance of the tank where the CCNY 3D CFD model was used to locate the in-tank baffle position. This paper describes the development of the flocculation sub-model and the relationship of the flocculation coefficients in the known Parker equation to the initial mixed liquor suspended solids (MLSS) concentration X0. A new modified equation is proposed removing the dependency of the breakup coefficient to the initial value of X0 based on preliminary data using normal and low concentration mixed liquor suspended solids values in flocculation experiments performed.

  13. Influence of selecting secondary settling tank sub-models on the calibration of WWTP models – A global sensitivity analysis using BSM2

    DEFF Research Database (Denmark)

    Ramin, Elham; Flores Alsina, Xavier; Sin, Gürkan

    2014-01-01

    This study investigates the sensitivity of wastewater treatment plant (WWTP) model performance to the selection of one-dimensional secondary settling tanks (1-D SST) models with first-order and second-order mathematical structures. We performed a global sensitivity analysis (GSA) on the benchmark...... simulation model No.2 with the input uncertainty associated to the biokinetic parameters in the activated sludge model No. 1 (ASM1), a fractionation parameter in the primary clarifier, and the settling parameters in the SST model. Based on the parameter sensitivity rankings obtained in this study......, the settling parameters were found to be as influential as the biokinetic parameters on the uncertainty of WWTP model predictions, particularly for biogas production and treated water quality. However, the sensitivity measures were found to be dependent on the 1-D SST models selected. Accordingly, we suggest...

  14. Enhanced settling of nonheavy inertial particles in homogeneous isotropic turbulence: The role of the pressure gradient and the Basset history force.

    Science.gov (United States)

    van Hinsberg, M A T; Clercx, H J H; Toschi, F

    2017-02-01

    The Stokes drag force and the gravity force are usually sufficient to describe the behavior of sub-Kolmogorov-size (or pointlike) heavy particles in turbulence, in particular when the particle-to-fluid density ratio ρ_{p}/ρ_{f}≳10^{3} (with ρ_{p} and ρ_{f} the particle and fluid density, respectively). This is, in general, not the case for smaller particle-to-fluid density ratios, in particular not for ρ_{p}/ρ_{f}≲10^{2}. In that case the pressure gradient force, added mass effects, and the Basset history force also play important roles. In this study we focus on the understanding of the role of these additional forces, all of hydrodynamic origin, in the settling of particles in turbulence. In order to qualitatively elucidate the complex dynamics of such particles in homogeneous isotropic turbulence, we first focus on the case of settling of such particles in the flow field of a single vortex. After having explored this simplified case we extend our analysis to homogeneous isotropic turbulence. In general, we found that the pressure gradient force leads to a decrease in the settling velocity. This can be qualitatively understood by the fact that this force prevents the particles from sweeping out of vortices, a mechanism known as preferential sweeping which causes enhanced settling. Additionally, we found that the Basset history force can both increase and decrease the enhanced settling, depending on the particle Stokes number. Finally, the role of the nonlinear Stokes drag has been explored, confirming that it affects settling of inertial particles in turbulence, but only in a limited way for the parameter settings used in this investigation.

  15. Recycling silicon wire-saw slurries: separation of silicon and silicon carbide in a ramp settling tank under an applied electrical field.

    Science.gov (United States)

    Tsai, Tzu-Hsuan; Shih, Yu-Pei; Wu, Yung-Fu

    2013-05-01

    The growing demand for silicon solar cells in the global market has greatly increased the amount of silicon sawing waste produced each year. Recycling kerf Si and SiC from sawing waste is an economical method to reduce this waste. This study reports the separation of Si and SiC using a ramp settling tank. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. The agreement between experimental results and predicted results shows that the particles traveled a short distance to reach the collection port in the ramp tank. Consequently, the time required for tiny particles to hit the tank bottom decreased, and the interference caused by the dispersion between particles and the fluid motion during settling decreased. In the ramp tank, the highest purities of the collected SiC and Si powders were 95.2 and 7.01 wt%, respectively. Using a ramp tank, the recycling fraction of Si-rich powders (SiC tanks. Recycling Si and SiC abrasives from the silicon sawing waste is regarded as an economical solution to reduce the sawing waste. However, the separation of Si and SiC is difficult. This study reports the separation of Si and SiC using a ramp settling tank under an applied electrical field. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. Compared with the rectangular tanks, the recycling fraction of Si-rich powders using a ramp tank is greater, and the proposed ramp settling tank is more suitable for industrial applications.

  16. Effective delivery of sonication energy to fast settling and agglomerating nanomaterial suspensions for cellular studies: Implications for stability, particle kinetics, dosimetry and toxicity.

    Science.gov (United States)

    Cohen, Joel M; Beltran-Huarac, Juan; Pyrgiotakis, Georgios; Demokritou, Philip

    2018-04-01

    Typical in vitro assays used for high throughput toxicological screening and measuring nano-bio interactions are conducted by pipetting suspensions of engineered nanomaterials (ENMs) dispersed in nutrient-rich culture media directly onto cells. In order to achieve fairly monodisperse and stable suspensions of small agglomerates, ultrasonic energy is usually applied to break apart large agglomerates that can form upon suspension in liquid. Lack of standardized protocols and methods for delivering sonication energy can introduce variability in the ENM suspension properties ( e.g . agglomerate size, polydispersity, suspension stability over time), and holds significant implications for in vitro dosimetry, toxicity, and other nano-bio interactions. Careful assessment of particle transformations during dispersion preparation and sonication is therefore critical for accurate interpretation of in vitro toxicity studies. In this short communication, the difficulties of preparing stable suspensions of rapidly settling ENMs are presented. Furthermore, methods to optimize the delivery of the critical sonication energy required to break large agglomerates and prepare stable, fairly monodispersed suspensions of fast settling ENMs are presented. A methodology for the efficient delivery of sonication energy in a discrete manner is presented and validated using various rapidly agglomerating and settling ENMs. The implications of continuous vs. discrete sonication on average hydrodynamic diameter, and polydispersity was also assessed for both fast and slow settling ENMs. For the rapidly agglomerating and settling ENMs (Ag15%/SiO 2 , Ag and CeO 2 ), the proposed discrete sonication achieved a significant reduction in the agglomerate diameter and polydispersity. In contrast, the relatively slow agglomerating and settling Fe 2 O 3 suspension did not exhibit statistically significant differences in average hydrodynamic diameter or polydispersity between the continuous and discrete

  17. Do accountable care organizations (ACOs) help or hinder primary care physicians' ability to deliver high-quality care?

    Science.gov (United States)

    Berenson, Robert A; Burton, Rachel A; McGrath, Megan

    2016-09-01

    Many view advanced primary care models such as the patient-centered medical home as foundational for accountable care organizations (ACOs), but it remains unclear how these two delivery reforms are complementary and how they may produce conflict. The objective of this study was to identify how joining an ACO could help or hinder a primary care practice's efforts to deliver high-quality care. This qualitative study involved interviews with a purposive sample of 32 early adopters of advanced primary care and/or ACO models, drawn from across the U.S. and conducted in mid-2014. Interview notes were coded using qualitative data analysis software, permitting topic-specific queries which were then summarized. Respondents perceived many potential benefits of joining an ACO, including care coordination staff, data analytics, and improved communication with other providers. However, respondents were also concerned about added "bureaucratic" requirements, referral restrictions, and a potential inability to recoup investments in practice improvements. Interviewees generally thought joining an ACO could complement a practice's efforts to deliver high-quality care, yet noted some concerns that could undermine these synergies. Both the advantages and disadvantages of joining an ACO seemed exacerbated for small practices, since they are most likely to benefit from additional resources yet are most likely to chafe under added bureaucratic requirements. Our identification of the potential pros and cons of joining an ACO may help providers identify areas to examine when weighing whether to enter into such an arrangement, and may help ACOs identify potential areas for improvement. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. Friend or Foe: Variability in How Sea Ice Can Both Hinder and Enhance Phytoplankton Blooms Across the Southern Ocean

    Science.gov (United States)

    Rohr, T.

    2016-02-01

    Globally, a suite of physical and biogeochemical controls govern the structure, size, and timing of seasonal phytoplankton blooms. In the Southern Ocean, the introduction of seasonal sea ice provides an additional constraining factor. From a bottom-up perspective, a reduction in sea ice can both enhance bloom development by permitting greater levels of surface PAR uninhibited by ice and suppress a bloom when reduced fresh melt-water inputs and increased vulnerability to wind stress combine to create deeper mixed layers and decrease depth integrated light availability. Regions along the Western Antarctic Peninsula have already seen a contradictory response to reduced ice cover, with enhanced summertime chlorophyll concentrations in the South, and large declines to the North. This dichotomy is thought to arise from differences in the interannual mean sea ice state, with extensively ice covered regions benefiting from reduced coverage and more sparsely covered regions hindered by further reductions. The questions arises: 1) At what threshold does a reduction in sea ice transition from amplifying blooms to suppressing them? 2) How do additional environmental considerations such as nutrient availability and trophic interactions complicate this transition? Here, we combine remote sensing observations and in-situ data (from PAL LTER) with a hierarchy of 1-D water column and global general circulation (CESM) models to access the variability in how regional differences in mean ice state combine with other environmental forcings to dictate how interannual variability (or long term trends) in ice coverage will affect bloom structure, size and dynamics. In doing so we will gain a better understanding of how predicted changes in sea ice will effect Southern Ocean productivity, which of course will have important consequences in the global carbon cycle and sustainability of healthy marine ecosystems.

  19. Influence of a hindered amine stabilizer (HAS) and inorganic salt mixture on degradation of poly(methyl methacrylate)

    International Nuclear Information System (INIS)

    Silva, Williams B. da; Vasconcelos, Henrique M. de; Aquino, Katia Aparecida da S.; Araujo, Elmo S.

    2009-01-01

    Commercial poly(methyl methacrylate) (PMMA) is used as medical supplies, which is sterilized by gamma irradiation at 25 kGy dose. However, when the PMMA is exposed to gamma rays it undergoes main chain scissions with changes in its properties. Samples of commercial PMMA containing a Hindered Amine Stabilizer (PMMA-HAS) and samples containing a salt mixture of CuCl 2 /KI (PMMA-salt) both at 0.3wt% concentration were investigated. The PMMA samples were purified by re-precipitation in methanol. The samples were irradiated with gamma radiation ( 60 Co) at room temperature in air at dose range of 15-100 kGy. The viscosity- average molecular weight (M v ) was analyzed by viscosity technique. Comparison of viscosity results obtained before and after irradiation of PMMA showed a decrease in Mv values on irradiated samples with the increase in dose, reflecting the random scissions that occurred in the main chain. However the decrease on M v is less in PMMA-HAS samples than control PMMA. The G value (scissions/100 eV of energy transferred to the system) obtained by viscosity analysis were used to calculated the protection value of HAS on PMMA matrix. The HAS showed a protection of 61% on PMMA molecules exposed to gamma irradiation. No efficiency action of salt mixture was observed on radiolytic degradation of PMMA. On the other hand the CuCl 2 /KI mixture influenced the mechanical behavior of PMMA and the HAS additive increased the maximum thermal degradation temperature of PMMA matrix. (author)

  20. Treatment with paracetamol, ketorolac or etoricoxib did not hinder alveolar bone healing: a histometric study in rats

    Directory of Open Access Journals (Sweden)

    Ricardo Nogueira Fracon

    2010-12-01

    Full Text Available Prostaglandins control osteoblastic and osteoclastic function under physiological or pathological conditions and are important modulators of the bone healing process. The non-steroidal anti-inflammatory drugs (NSAIDs inhibit cyclooxygenase (COX activity and consequently prostaglandins synthesis. Experimental and clinical evidence has indicated a risk for reparative bone formation related to the use of non-selective (COX-1 and COX-2 and COX-2 selective NSAIDs. Ketorolac is a non-selective NSAID which, at low doses, has a preferential COX-1 inhibitory effect and etoricoxib is a new selective COX-2 inhibitor. Although literature data have suggested that ketorolac can interfere negatively with long bone fracture healing, there seems to be no study associating etoricoxib with reparative bone formation. Paracetamol/acetaminophen, one of the first choices for pain control in clinical dentistry, has been considered a weak anti-inflammatory drug, although supposedly capable of inhibiting COX-2 activity in inflammatory sites. OBJECTIVE: The purpose of the present study was to investigate whether paracetamol, ketorolac and etoricoxib can hinder alveolar bone formation, taking the filling of rat extraction socket with newly formed bone as experimental model. MATERIAL AND METHODS: The degree of new bone formation inside the alveolar socket was estimated two weeks after tooth extraction by a differential point-counting method, using an optical microscopy with a digital camera for image capture and histometry software. Differences between groups were analyzed by ANOVA after confirming a normal distribution of sample data. RESULTS AND CONCLUSIONS: Histometric results confirmed that none of the tested drugs had a detrimental effect in the volume fraction of bone trabeculae formed inside the alveolar socket.

  1. Increase of glucocorticoids is not required for the acquisition, but hinders the extinction, of lithium-induced conditioned taste aversion.

    Science.gov (United States)

    Kim, Kyu-Nam; Kim, Bom-Taeck; Kim, Young-Sang; Lee, Jong-Ho; Jahng, Jeong Won

    2014-05-05

    Lithium chloride at doses sufficient to induce conditioned taste aversion (CTA) causes c-Fos expression in the paraventricular nucleus and increases the plasma level of corticosterone with activation of the hypothalamic-pituitary-adrenal axis. This study was conducted to define the role of glucocorticoid in the acquisition and extinction of lithium-induced CTA. In experiment 1, Sprague-Dawley rats received dexamethasone (2mg/kg) or RU486 (20mg/kg) immediately after 5% sucrose access, and then an intraperitoneal injection of isotonic lithium chloride (12ml/kg) was followed with 30min interval. Rats had either 1 or 7 days of recovery period before the daily sucrose drinking tests. In experiment 2, rats were conditioned with the sucrose-lithium pairing, and then received dexamethasone or vehicle at 30min before each drinking test. In experiment 3, adrenalectomized (ADX or ADX+B) rats were subjected to sucrose drinking tests after the sucrose-lithium pairing. Dexamethasone, but not RU486, pretreatment blunted the formation of lithium-induced CTA memory. Dexamethasone prior to each drinking test suppressed sucrose consumption and prolonged the extinction of lithium-induced CTA. Sucrose consumption was significantly suppressed not only in ADX+B rats but also in ADX rats during the first drinking session; however, a significant decrease was found only in ADX rats on the fourth drinking session. These results reveal that glucocorticoid is not a necessary component in the acquisition, but an important player in the extinction, of lithium-induced CTA, and suggest that a pulse increase of glucocorticoid may hinder the extinction memory formation of lithium-induced CTA. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. DNA unwinding by ring-shaped T4 helicase gp41 is hindered by tension on the occluded strand.

    Science.gov (United States)

    Ribeck, Noah; Saleh, Omar A

    2013-01-01

    The replicative helicase for bacteriophage T4 is gp41, which is a ring-shaped hexameric motor protein that achieves unwinding of dsDNA by translocating along one strand of ssDNA while forcing the opposite strand to the outside of the ring. While much study has been dedicated to the mechanism of binding and translocation along the ssDNA strand encircled by ring-shaped helicases, relatively little is known about the nature of the interaction with the opposite, 'occluded' strand. Here, we investigate the interplay between the bacteriophage T4 helicase gp41 and the ss/dsDNA fork by measuring, at the single-molecule level, DNA unwinding events on stretched DNA tethers in multiple geometries. We find that gp41 activity is significantly dependent on the geometry and tension of the occluded strand, suggesting an interaction between gp41 and the occluded strand that stimulates the helicase. However, the geometry dependence of gp41 activity is the opposite of that found previously for the E. coli hexameric helicase DnaB. Namely, tension applied between the occluded strand and dsDNA stem inhibits unwinding activity by gp41, while tension pulling apart the two ssDNA tails does not hinder its activity. This implies a distinct variation in helicase-occluded strand interactions among superfamily IV helicases, and we propose a speculative model for this interaction that is consistent with both the data presented here on gp41 and the data that had been previously reported for DnaB.

  3. Zooplankton biomass (displacement and settled volume) data collected during the International Cooperative Investigations of the Tropical Atlantic EQUALANT I, EQUALANT II, and EQUALANT III projects from 1963-02-15 to 1964-07-09 (NODC Accession 0071432)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton biomass (displacement and settled volume) data collected during the International Cooperative Investigations of the Tropical Atlantic EQUALANT I,...

  4. Inflammatory potential in relation to the microbial content of settled dust samples collected from moisture domaged and reference schools: results of HITEA study.

    NARCIS (Netherlands)

    Huttunen, K.; Tirkkonen, J.; Täubel, M.; Krop, E.; Mikkonen, S.; Pekkanen, J.; Heederik, D.; Zock, J.P.; Hyvärinen, A.; Hirvonen, M.R.

    2016-01-01

    Aiming to identify factors causing the adverse health effects associated with moisture-damaged indoor environments, we analyzed immunotoxicological potential of settled dust from moisture-damaged and reference schools in relation to their microbiological composition. Mouse RAW264.7 macrophages were

  5. Common attributes in retired professional cricketers that may enhance or hinder quality of life after retirement: a qualitative study.

    Science.gov (United States)

    Filbay, Stephanie R; Bishop, Felicity; Peirce, Nicholas; Jones, Mary E; Arden, Nigel K

    2017-07-26

    Retired professional cricketers shared unique experiences and may possess specific psychological attributes with potential to influence quality of life (QOL). Additionally, pain and osteoarthritis can be common in retired athletes which may negatively impact QOL. However, QOL in retired athletes is poorly understood. This study explores the following questions from the personal perspective of retired cricketers: How do retired cricketers perceive and experience musculoskeletal pain and function in daily life? Are there any psychological attributes that might enhance or hinder retired cricketers' QOL? A qualitative study using semistructured interviews, which were subject to inductive, thematic analysis. A data-driven, iterative approach to data coding was employed. All participants had lived and played professional cricket in the UK and were living in the UK or abroad at the time of interview. Eighteen male participants, aged a mean 57±11 (range 34-77) years had played professional cricket for a mean 12±7 seasons and had been retired from professional cricket on average 23±9 years. Fifteen participants reported pain or joint difficulties and all but one was satisfied with their QOL. Most retired cricketers reflected on experiences during their cricket career that may be associated with the psychological attributes that these individuals shared, including resilience and a positive attitude. Additional attributes included a high sense of body awareness, an ability to self-manage pain and adapt lifestyle choices to accommodate physical limitations. Participants felt fortunate and proud to have played professional cricket, which may have further contributed to the high QOL in this group of retired cricketers. Most retired cricketers in this study were living with pain or joint difficulties. Despite this, all but one was satisfied or very satisfied with their QOL. This may be partly explained by the positive psychological attributes that these retired cricketers

  6. Fluidisation and dispersion behaviour of small high density pellicular expanded bed adsorbents

    DEFF Research Database (Denmark)

    Theodossiou, Irini; Elsner, H.D.; Thomas, Owen R. T.

    2002-01-01

    correlation for characterisation of expanded bed systems is questioned. Residence time distribution studies using acetone tracers, demonstrated that in comparison to existing commercial supports, the small pellicular prototype materials generally possessed far superior hydrodynamic properties, which augurs......, fluidisation behaviour was poorly predicted from the Richardson-Zaki correlation, with experimentally determined values of the expansion index being considerably higher than the theoretical values. The reasons for these discrepancies are discussed in detail and the validity of applying this widely used...

  7. An improved model for estimating fractal structure of silica nano-agglomerates in a vibro-fluidized bed

    OpenAIRE

    A Esmailpour; N Mostoufi; R Zarghami

    2016-01-01

    A study has been conducted to determine the effects of operating conditions such as vibration frequency, vibration amplitude on the fractal structure of silica (SiO2) nanoparticle agglomerate in a vibro-fluidized bed. An improved model was proposed by assimilation of fractal theory, Richardson-Zaki equation and mass balance. This model has been developed to predict the properties of nanoparticle agglomerate, such as fractal dimension and its size. It has been found out the vibration intensity...

  8. Contamination of settling ponds and rivers as a result of discharge of radium-bearing waters from Polish coal mines.

    Science.gov (United States)

    Chalupnik, S; Michalik, B; Wysocka, M; Skubacz, K; Mielnikow, A

    2001-01-01

    Saline waters from underground coal mines in Poland often contain natural radioactive isotopes, mainly 226Ra from the uranium decay series and 228Ra from the thorium series. Approximately 40% of the total amount of radium remains underground as radioactive deposits, but 225 MBq of 226Ra and 400 MBq of 228Ra are released daily into the rivers along with the other mine effluents from all Polish coal mines. Technical measures such as inducing the precipitation of radium in gobs, decreasing the amount of meteoric inflow water into underground workings, etc. have been undertaken in several coal mines, and as a result of these measures, the total amount of radium released to the surface waters has diminished by about 60% during the last 5-6 years. Mine water can have a severe impact on the natural environment, mainly due to its salinity. However, associated high levels of radium concentration in river waters, bottom sediments and vegetation have also been observed. Sometimes radium concentrations in rivers exceed 0.7 kBq/m3, which is the permitted level for waste waters under Polish law. The extensive investigations described here were carried out for all coal mines and on this basis the total radium balance in the effluents has been calculated. Measurements in the vicinity of mine settling ponds and in rivers have given us an opportunity to study radium behaviour in river waters and to assess the degree of contamination. Solid waste materials with enhanced natural radioactivity have been produced in huge amounts in the power and coal industries in Poland. As a result of the combustion of coal in power plants, low-radioactive waste materials are produced, with 226Ra concentration seldom exceeding a few hundreds of Bq/kg. A different situation is observed in coal mines, where, as a result of precipitation of radium from radium-bearing waters, highly radioactive deposits are formed. Sometimes the radioactivity of such materials is extremely high; precipitates from coal

  9. La/Yb and Th/Sc in settling particles: vertical and horizontal transport of lithogenic material in the western North Pacific

    International Nuclear Information System (INIS)

    Otosaka, Shigeyoshi; Noriki, Shinichiro; Honda, Makio C.

    2004-01-01

    In order to understand the origins and transport processes of lithogenic aluminosilicate in the western North Pacific, time-series traps were deployed at Stn. KNOT at 44degN 155degE (water depth: 5320 m). Annual mean content of aluminum (Al) which is a proxy of lithogenic material in settling particles was 0.38% at 1 km depth, 0.78% at 3 km depth and 1.14% at 5 km depth, respectively. Mass fluxes were corrected by 230 Th and 231 Pa activities in particles and seawater. Annual mean corrected Al fluxes at 1, 3 and 5 km depths were calculated to 0.45, 0.46 and 0.33 g/m 2 /year, respectively. Lanthanum/ytterbium (La/Yb) and thorium/scandium (Th/Sc) ratios were used as proxies for estimating the origin of lithogenic aluminosilicate in settling particles. Both La/Yb and Th/Sc ratios in settling particles increased with depth, and the seasonal variation was the smallest at 5 km depth. It was considered that variations of La/Yb and Th/Sc ratios in settling particles reflected the change of source material of lithogenic aluminosilicates. Origins of lithogenic materials in the settling particles were summarized using two end-members, loess from central Asian continent (AL) and basalts from the Kurile-Kamchatka Islands (KEK). Contributions of end-members in settling particles were estimated from the La/Yb and Th/Sc ratios. The contribution of KK particles in lithogenic materials was calculated to be 84% at 1 km depth, and 61% at 3 and 5 km depths, respectively. Although the KK material was the dominant constituent of the terrigenous component in settling particles at Stn. KNOT, the KK flux decreased with depth. On the other hand, the AL flux increased with depth and the significant increase of the AL flux was presumably due to the lateral import of AL particles to the deep layer at Stn. KNOT. From these results we conclude that the distribution of lithogenic materials recorded in sediments in the western North Pacific are influenced by the northward transport of AL within the

  10. Prediction of the Wall Factor of Arbitrary Particle Settling through Various Fluid Media in a Cylindrical Tube Using Artificial Intelligence

    Directory of Open Access Journals (Sweden)

    Mingzhong Li

    2014-01-01

    Full Text Available Considering the influence of particle shape and the rheological properties of fluid, two artificial intelligence methods (Artificial Neural Network and Support Vector Machine were used to predict the wall factor which is widely introduced to deduce the net hydrodynamic drag force of confining boundaries on settling particles. 513 data points were culled from the experimental data of previous studies, which were divided into training set and test set. Particles with various shapes were divided into three kinds: sphere, cylinder, and rectangular prism; feature parameters of each kind of particle were extracted; prediction models of sphere and cylinder using artificial neural network were established. Due to the little number of rectangular prism sample, support vector machine was used to predict the wall factor, which is more suitable for addressing the problem of small samples. The characteristic dimension was presented to describe the shape and size of the diverse particles and a comprehensive prediction model of particles with arbitrary shapes was established to cover all types of conditions. Comparisons were conducted between the predicted values and the experimental results.

  11. Prediction of the Wall Factor of Arbitrary Particle Settling through Various Fluid Media in a Cylindrical Tube Using Artificial Intelligence

    Science.gov (United States)

    Li, Mingzhong; Xue, Jianquan; Li, Yanchao; Tang, Shukai

    2014-01-01

    Considering the influence of particle shape and the rheological properties of fluid, two artificial intelligence methods (Artificial Neural Network and Support Vector Machine) were used to predict the wall factor which is widely introduced to deduce the net hydrodynamic drag force of confining boundaries on settling particles. 513 data points were culled from the experimental data of previous studies, which were divided into training set and test set. Particles with various shapes were divided into three kinds: sphere, cylinder, and rectangular prism; feature parameters of each kind of particle were extracted; prediction models of sphere and cylinder using artificial neural network were established. Due to the little number of rectangular prism sample, support vector machine was used to predict the wall factor, which is more suitable for addressing the problem of small samples. The characteristic dimension was presented to describe the shape and size of the diverse particles and a comprehensive prediction model of particles with arbitrary shapes was established to cover all types of conditions. Comparisons were conducted between the predicted values and the experimental results. PMID:24772024

  12. Preparation of New 2,3-Diphenylpropenoic Acid Esters – Good Yields Even for the More Hindered Z Isomers

    Directory of Open Access Journals (Sweden)

    István Pálinkó

    2004-03-01

    Full Text Available The potassium salt of E- and Z-2,3-diphenylpropenoic acids prepared in situ could be esterified efficiently in DMSO with the appropriate alkyl halides at room temperature. In this way 10 previously undescribed esters of these acids were synthesised and characterised. Excellent yields were observed for most of the E isomers and the more hindered Z esters were also obtained in good yields, far better than those obtained applying the classical acid-catalysed esterification reaction.

  13. Settling the Score

    Science.gov (United States)

    Askew, Jennifer; Gray, Ron

    2016-01-01

    British scientist John Dalton (1766-1844), French scientist Joseph Louis Gay-Lussac (1778-1850), and Italian scientist Amedeo Avogadro (1776-1856) are familiar to many chemistry students. Such students may understand the importance of Dalton's atomic theory, model how Gay-Lussac's law relates the pressure and the temperature of a gas, and use…

  14. The Dust Settles

    Institute of Scientific and Technical Information of China (English)

    DAVID SPARKES

    2010-01-01

    @@ I think my Beijing sleep patterns are nearly back to normal. It has taken a few weeks, but in the wake of the world's greatest sporting event, the need to pass entire work nights without slumber has be-come a distant memory.

  15. Reflectance spectroscopy of indoor settled dust in Tel Aviv, Israel: comparison between the spring and the summer seasons

    Directory of Open Access Journals (Sweden)

    A. A. Chudnovsky

    2007-07-01

    Full Text Available The influence of mineral and anthropogenic dust components on the VIS-NIR-SWIR spectral reflectance of artificial laboratory dust mixtures was evaluated and used in combination with Partial Least Squares (PLS regression to construct a model that correlates the dust content with its reflectance. Small amounts of dust (0.018–0.33 mg/cm2 were collected using glass traps placed in different indoor environments in Tel Aviv, Israel during the spring and summer of 2005. The constructed model was applied to reflectance spectroscopy measurements derived from the field dust samples to assess their mineral content. Additionally, field samples were examined using Principal Component Analysis (PCA to identify the most representative spectral pattern for each season. Across the visible range of spectra two main spectral shapes were observed, convex and concave, though spectra exhibiting hybrid shapes were also seen. Spectra derived from spring season dust samples were characterized mostly by a convex shape, which indicates a high mineral content. In contrast, the spectra generated from summer samples were characterized generally by a concave shape, which indicates a high organic matter content. In addition to this seasonal variation in spectral patterns, spectral differences were observed associated with the dwelling position in the city. Samples collected in the city center showed higher organic content, whereas samples taken from locations at the city margins, near the sea and next to open areas, exhibited higher mineral content. We conclude that mineral components originating in the outdoor environment influence indoor dust loads, even when considering relatively small amounts of indoor settled dust. The sensitive spectral-based method developed here has potentially many applications for environmental researchers and policy makers concerned with dust pollution.

  16. Distributions of Heterocyst Glycolipids in Settling Particulate Matter Record Ecological and Environmental Parameters in a Tropical Lake

    Science.gov (United States)

    Meegan Kumar, D.; Hopmans, E.; S Sinninghe Damsté, J.; Schouten, S.; Bauersachs, T.; Werne, J. P.

    2017-12-01

    Temperature is a critical component of paleoenvironmental reconstructions, yet it is notoriously difficult to measure in terrestrial archives. Presented here is an investigation of unique glycolipids produced by heterocystous cyanobacteria, so-called heterocyst glycolipids (HGs), in the water column of Lake Malawi (East Africa). The goal of the study is to evaluate the potential of HGs to function as a paleotemperature proxy in tropical lacustrine environments. HGs in Lake Malawi were extracted from settling particulate matter (SPM) collected at bi-monthly intervals from 2011 - 2013. Sediment traps were moored in the metalimnion of both the north and south basins of the lake in order to evaluate the spatial and the temporal trends in lipid production and export. This study is the first to analyze HGs in SPM and contains the longest time-series of HG production in a natural environment to date. HGs are consistently present throughout the three-year study period, but maximum fluxes occur annually in December, coincident with the timing of cyanobacterial blooms in the lake. HGs in SPM appear to be sourced from living cyanobacteria populations, indicating rapid export of the lipids through the water column. Temperatures reconstructed with published HG-based indices, which are derived from the relative abundances of HG diols and triols to HG keto-(di)ols, do not accurately reflect the seasonal variability in measured surface water temperatures. Rather, the production of C28 HG keto-ols appears to be related to the timing of heterocyst differentiation. Heterocystous cyanobacteria in Lake Malawi may instead respond to growth temperatures by elongating the alkyl side chain of HG diols, as indicated by increases in the abundance of the C28 HG diol relative to the C26 HG diol with warmer surface water temperatures. Distributions of HGs thus may indeed provide a novel tool for paleotemperature reconstructions in tropical lakes.

  17. The interaction with suspended and settled sedimentary materials of long-lived radionuclides discharged into United Kingdom coastal waters

    Science.gov (United States)

    Pentreath, R. J.

    1987-11-01

    Low-level liquid radioactive wastes are routinely discharged under authorization into United Kingdom coastal waters from nuclear reactor sites, from nuclear fuel reprocessing and fabrication plants, and from other facilities connected with the nuclear industries. The effluents contain a wide range of radionuclides, with greatly varying half-lives and in different chemical forms. The receiving environments are also markedly different. All of these factors need to be taken into account in order that the authorizations for discharge are based on a sound knowledge of the underlying environmental science as well as meeting the objectives of radiological protection. The largest research effort has been expended on the longer-lived nuclides discharged from the BNFL plant at Sellafield into the Irish Sea. These studies have focused on such aspects as the nature of the effluent, the dispersion of the soluble nuclides out of the Irish Sea, the retention of other nuclides within it, and the incorporation of radionuclides into settled sediments. Some comparisons have also been made between other sites by observing the concentrations of radionuclides in similar materials, at similar distances, per unit rate of discharge. Although these studies are useful in developing an understanding of the dynamics of radionuclides in coastal environments, it is essential to have a wider and more general knowledge if the long-term consequences of discharging radionuclides—or any other chemical waste—into coastal waters are to be fully evaluated. These consequences are assessed by the use of models which have, necessarily, to simplify many of the processes involved. It is therefore all the more important that the underlying science relating to the nature and behaviour of the wastes, and of the receiving environment, is fully explored, and that the assumptions used in the models can be satisfactorily validated.

  18. Development of the preoptic area: time and site of origin, migratory routes, and settling patterns of its neurons

    International Nuclear Information System (INIS)

    Bayer, S.A.; Altman, J.

    1987-01-01

    Neurogenesis and morphogenesis in the rat preoptic area were examined with [ 3 H]thymidine autoradiography. For neurogenesis, the experimental animals were the offspring of pregnant females given an injection of [ 3 H]thymidine on two consecutive gestational days. Nine groups were exposed to [ 3 H]thymidine on embryonic days E13-E14, E14-E15, E21-E22, respectively. On postnatal day P5, the percentage of labeled cells and the proportion of cells originating during 24-hr periods were quantified at four anteroposterior levels in the preoptic area. Throughout most of the preoptic area there is a lateral to medial neurogenetic gradient. Neurons originate between E12-E15 in the lateral preoptic area, between E13-E16 in the medial preoptic area, between E14-E17 in the medial preoptic nucleus, and between E15-E18 in the periventricular nucleus. These structures also have intrinsic dorsal to ventral neurogenetic gradients. There are two atypical structures: (1) the sexually dimorphic nucleus originates exceptionally late (E15-E19) and is located more lateral to the ventricle than older neurons; (2) in the median preoptic nucleus, where older neurons (E13-E14) are located closer to the third ventricle than younger neurons (E14-E17). For an autoradiographic study of morphogenesis, pregnant females were given a single injection of [ 3 H]thymidine during gestation, and their embryos were removed either two hrs later (short survival) or in successive 24-hr periods (sequential survival). Short-survival autoradiography was used to locate the putative neuroepithelial sources of preoptic nuclei, and sequential survival autoradiography was used to trace the migratory waves of young neurons and their final settling locations. The preoptic neuroepithelium is located anterior to and in the front wall of the optic recess

  19. Prolonged sojourn of developing pyramidal cells in the intermediate zone of the hippocampus and their settling in the stratum pyramidale

    International Nuclear Information System (INIS)

    Altman, J.; Bayer, S.A.

    1990-01-01

    In radiograms of rat embryos that received a single dose of [3H]thymidine between days E16 and E20 and were killed 24 hours after the injection, the heavily labeled cells (those that ceased to multiply soon after the injection) form a horizontal layer in the intermediate zone of the hippocampus, called the inferior band. The fate of these heavily labeled cells was traced in radiograms of the dorsal hippocampus in embryos that received [3H]thymidine on day E18 and were killed at different intervals thereafter. Two hours after injection the labeled proliferative cells are located in the Ammonic neuroepithelium. The heavily labeled cells that leave the neuroepithelium and aggregate in the inferior band 1 day after the injection become progressively displaced toward the stratum pyramidale 2-3 days later, and penetrate the stratum pyramidale of the CA1 region on the 4th day. In the stratum pyramidale of the CA3 region, farther removed from the Ammonic neuroepithelium, the heavily labeled cells are still sojourning in the intermediate zone 4 days after labeling. Observations in methacrylate sections suggest that two morphogenetic features of the developing hippocampus may contribute to the long sojourn of young pyramidal cells in the intermediate zone: the way in which the stratum pyramidale forms and the way in which the alveolar channels develop. The stratum pyramidale of the CA1 region forms before that of the CA3 region, which is the reverse of the neurogenetic gradient in the production of pyramidal cells. We hypothesize that this is so because the pyramidal cells destined to settle in the CA3 region, which will be contacted by granule cells axons (the mossy fibers), have to await the formation of the granular layer on days E21-E22

  20. [Analysis of carbon balance and study on mechanism in anoxic-oxic-settling-anaerobic sludge reduction process].

    Science.gov (United States)

    Zhai, Xiao-Min; Gao, Xu; Zhang, Man-Man; Jia, Li; Guo, Jin-Song

    2012-07-01

    In order to deeply explore the mechanism of sludge reduction in OSA system, carbon balance was performed in an anoxic-oxic-settling-anaerobic (A + OSA) system and a reference AO system to investigate effects of inserting a sludge holding tank in sludge cycle line on the sludge reduction process. Meanwhile, carbon mass change in each reaction unit was identified in terms of solid, liquid and gas phases. The causes of excess sludge reduction in A + OSA system were deduced. The carbon balance results show that when the hydraulic retention time in the sludge holding tank is 7.14 h, carbon percent in solid phase of the sludge reduction system is nearly 50% higher than that of the reference system, supporting the consequence that sludge reduction rate of 49.98% had been achieved. The insertion of a sludge holding tank in the sludge return circuit can be effective in sludge reduction. Carbon changes in each unit reveal that the amount of carbon consumed for biosynthesis in the anoxic and oxic tanks (main reaction zone) of the sludge reduction system is higher than in that of the reference system. Sludge decay is observed in the sludge holding tank. Furthermore, CH4 released from the sludge holding tank is significantly higher than that from the main reaction zone. The DGGE profiles show that there are hydrolytic-fermentative bacteria in the sludge holding tank related to sludge decay. The excess sludge reduction in the A + OSA system could be a result of the combination of sludge decay in the sludge holding tank and sludge compensatory growth in the main reaction cell.

  1. Spatial and Temporal Variability of Channel Retention in a Lowland Temperate Forest Stream Settled by European Beaver (Castor fiber

    Directory of Open Access Journals (Sweden)

    Mateusz Grygoruk

    2014-09-01

    Full Text Available Beaver ponds remain a challenge for forest management in those countries where expansion of beaver (Castor fiber is observed. Despite undoubted economic losses generated in forests by beaver, their influence on hydrology of forest streams especially in terms of increasing channel retention (amount of water stored in the river channel, is considered a positive aspect of their activity. In our study, we compared water storage capacities of a lowland forest stream settled by beaver in order to unravel the possible temporal variability of beaver’s influence on channel retention. We compared distribution, total damming height, volumes and areas of beaver ponds in the valley of Krzemianka (Northeast Poland in the years 2006 (when a high construction activity of beaver was observed and in 2013 (when the activity of beaver decreased significantly. The study revealed a significant decrease of channel retention of beaver ponds from over 15,000 m3 in 2006 to 7000 m3 in 2013. The total damming height of the cascade of beaver ponds decreased from 6.6 to 5.6 m. Abandoned beaver ponds that transferred into wetlands, where lost channel retention was replaced by soil and groundwater retention, were more constant over time and less vulnerable to the external disturbance means of water storage than channel retention. We concluded that abandoned beaver ponds played an active role in increasing channel retention of the river analyzed for approximately 5 years. We also concluded that if the construction activity of beaver was used as a tool (ecosystem service in increasing channel retention of the river valley, the permanent presence of beaver in the riparian zone of forest streams should have been assured.

  2. Effect of settling particles on the stability of a particle-laden flow in a vertical plane channel

    Science.gov (United States)

    Boronin, S. A.; Osiptsov, A. N.

    2018-03-01

    The stability of a viscous particle-laden flow in a vertical plane channel in the presence of the gravity force is studied. The flow is described using a two-fluid "dusty-gas" model with negligibly small volume fraction of fines and two-way coupling of the phases. Two different profiles of the particle number density in the main flow are considered: homogeneous and non-homogeneous in the form of two layers symmetric about the channel axis. The novel element of the linear-stability problem formulation is a particle velocity slip in the main flow caused by the gravity-induced settling of the dispersed phase. The eigenvalue problem for a linearized system of governing equations is solved using the orthonormalization and QZ algorithms. For a uniform particle number density distribution, it is found that there exists a domain in the plane of Froude and Stokes numbers, in which the two-phase flow in a vertical channel is stable for an arbitrary Reynolds number. This stability domain corresponds to relatively small-inertia particles and large velocity-slip in the main flow. In contrast to the flow with a uniform particle number density distribution, the stratified dusty-gas flow in a vertical channel is unstable over a wide range of governing parameters. The instability at small Reynolds numbers is determined by the gravitational mode characterized by small wavenumbers (long-wave instability), while at larger Reynolds numbers the instability is dominated by the shear mode with the time-amplification factor larger than that of the gravitational mode. The results of the study can be used for optimization of a large number of technological processes, including those in riser reactors, pneumatic conveying in pipeline systems, hydraulic fracturing, and well cementing.

  3. Dye stability and performances of dye-sensitized solar cells with different nitrogen additives at elevated temperatures - Can sterically hindered pyridines prevent dye degradation?

    Energy Technology Data Exchange (ETDEWEB)

    Tuyet Nguyen, Phuong; Lund, Torben [Department of Science, Systems and Models, Roskilde University, 4000 Roskilde (Denmark); Rand Andersen, Anders [University of Southern Denmark, Institute of Sensors, Signals and Electrotechnics (SENSE), Niels Bohrs Alle 1, 5230 Odense M (Denmark); Danish Technological Institute, Plastics Technology, Gregersensvej 2630 Taastrup (Denmark); Morten Skou, Eivind [University of Southern Denmark, Department of Chemical Engineering, Biotechnology and Enviromental Technology, Niels Bohrs Alle 1, 5230 Odense M (Denmark)

    2010-10-15

    The homogeneous kinetics of the nucleophilic substitution reactions between the ruthenium dye N719 and eight pyridines and 1-methylbenzimidazole have been investigated in 3-methoxypropionitrile at 100 C. The half lives of N719 with the additives 4-tert-butylpyridine (0.5 M) and 1-methylbenzimidazole (0.5 M) were 57 and 160 h, respectively. Sterically hindered pyridines like 2,6-lutidine did not react with N719. The efficiencies of dye-sensitized solar cells (DSC, area=8.0 cm{sup 2}) prepared with 1-methylbenzimidazole (MBI), 4-tert-butylpyridine (4-TBP), 2,6-lutidine and without any additive were 7.1%, 6.2%, 6.0% and 4.8%, respectively. The cells were stored in dark at 85 C and their I-V curves and impedance spectra were measured at regular time intervals. The N719 dye degradation in the cells were monitored by a new dye extraction protocol combined with analysis of the dye extract by HPLC coupled to mass spectrometry. After 300 h storage in dark at 85 C 40% of the initial amount of N719 dye was degraded in DSC cells prepared with MBI and the efficiency was decreased to 40% of its initial value. DSC cells prepared with 2,6-lutidine or no additives showed smaller thermal dye and efficiency stability at elevated temperatures than DSC cells prepared with the none sterically hindered additives MBI and 4-TBP. In the cells prepared with 2,6-lutidine or no additive higher contents of the iodo products [RuL{sub 2}(NCS)(iodide)]{sup +} and [RuL{sub 2}(3-MPN)(iodide)]{sup +} were found than in cells prepared with 4-TBP and MBI. It is suggested that sterically hindered pyridines have smaller complexation constants with I{sub 3}{sup -} than unsterically hindered additives. This may explain the observed faster nucleophilic substitution rates of uncomplexed I{sub 3}{sup -} with N719 in DSC cells prepared with sterically hindered pyridines. The EIS analysis showed that the lifetime of the injected electrons in the TiO{sub 2}{tau}{sub eff} is reduced by a thermally induced change

  4. An assessment of hopanes in settled dust and air as indicators of exposure to traffic-related air pollution in Windsor, Ontario

    Science.gov (United States)

    Curran, Jason

    Traffic-related air pollution (TRAP) has been linked with several adverse health effects. We investigated hopanes, markers of primary particle emissions from gasoline and diesel engines, in house dust as an alternative approach for assessing exposure to TRAP in Windsor, Ontario. Settled house dust was collected from the homes of 28 study participants (10 -- 13 yrs). The dust was then analyzed for a suite of hopanes by gas chromatography-mass spectrometry. We calculated correlations between dust hopane concentrations and estimates of annual average NO2 concentrations derived from an existing LUR model. Hopanes were consistently present in detectable quantities in house dust. Annual average outdoor NO2 estimated was moderately correlated with hopanes in house dust (r = 0.46; pefficiency or the presence of an attached garage. Hopanes measured in settled house dust show promise as an indicator of long-term exposure to traffic-related air pollution. Keywords: hopane; air pollution; traffic; dust; exposure; TRAP.

  5. Practical selection and method of operation of the sedimentation settling tanks in the clay mining industry; Praktische Auswahl und Betriebsart der Sedimentationsklaerbecken im Tonbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Groborz, Withold-Simon [Sibelco Deutschland GmbH, Ransbach-Baumbach (Germany)

    2009-10-22

    The application of the ''linear principles as optimisation basis for the technical planning of the sedimentation tanks in the clay mining industry'' described in GLUeCKAUF 143 (2007), No. 10 permits rapid and simplified planning of the settling tanks required for this purpose, which is fully dependent on the size of the dirty water pump used. The geometrical tank size is specified in advance. The course of the sedimentation process can be clearly improved, if there is more than one settling tank in operation, whereby selection of the method of operation of the tanks can basically be left to the mine operator. Nevertheless practical experience in this field has proved that connection of the tanks in series can be regarded as more effective for the sedimentation process. (orig.)

  6. Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Peng [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States); Liu, Sa [Environmental Health Sciences Division, School of Public Health, University of California, Berkeley, CA, 94720-7360 (United States); Ye, Wenyuan [Department of Chemical Engineering, KU Leuven, Willem de Croylaan 46, B-3001 Heverlee (Belgium); Lin, Nan; Meng, Ping [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Feng, Yujie, E-mail: yujief@hit.edu.cn [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Zhang, Zhaohan; Cui, Fuyi; Lu, Binyu [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Xing, Baoshan [Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States)

    2015-03-01

    Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level.

  7. Examination of the potential problems resulting from the settling of U5 procedure (filtered venting of the containment) on French PWR'S

    International Nuclear Information System (INIS)

    L'Homme, A.; Serviere, G.

    1988-06-01

    A filtered venting system of the containment including a sand bed (U5 procedure) is now settled on french PWR's. In this paper, one reviews the problems which are raised, concerning either the efficiency of the system or the safety of the nuclear unit. Two types of situations are examined: design situations, for which the U5 procedure is not used, and hypothetical accidental situations, for which the U5 procedure could be used

  8. Dopamine receptor genetic polymorphisms and body composition in undernourished pastoralists: An exploration of nutrition indices among nomadic and recently settled Ariaal men of northern Kenya

    Directory of Open Access Journals (Sweden)

    Gray Peter B

    2008-06-01

    Full Text Available Abstract Background Minor alleles of the human dopamine receptor polymorphisms, DRD2/TaqI A and DRD4/48 bp, are related to decreased functioning and/or numbers of their respective receptors and have been shown to be correlated with body mass, height and food craving. In addition, the 7R minor allele of the DRD4 gene is at a higher frequency in nomadic compared to sedentary populations. Here we examine polymorphisms in the DRD2 and DRD4 genes with respect to body mass index (BMI and height among men in two populations of Ariaal pastoralists, one recently settled (n = 87 and the other still nomadic (n = 65. The Ariaal live in northern Kenya, are chronically undernourished and are divided socially among age-sets. Results Frequencies of the DRD4/7R and DRD2/A1 alleles were 19.4% and 28.2%, respectively and did not differ between the nomadic and settled populations. BMI was higher in those with one or two DRD4/7R alleles in the nomadic population, but lower among the settled. Post-hoc analysis suggests that the DRD4 differences in BMI were due primarily to differences in fat free body mass. Height was unrelated to either DRD2/TaqI A or DRD4/48 bp genotypes. Conclusion Our results indicate that the DRD4/7R allele may be more advantageous among nomadic than settled Ariaal men. This result suggests that a selective advantage mediated through behaviour may be responsible for the higher frequency of the 7R alleles in nomadic relative to sedentary populations around the world. In contrast to previous work, we did not find an association between DRD2 genotypes and height. Our results support the idea that human phenotypic expression of genotypes should be rigorously evaluated in diverse environments and genetic backgrounds.

  9. DUST PROPERTIES AND DISK STRUCTURE OF EVOLVED PROTOPLANETARY DISKS IN Cep OB2: GRAIN GROWTH, SETTLING, GAS AND DUST MASS, AND INSIDE-OUT EVOLUTION

    International Nuclear Information System (INIS)

    Sicilia-Aguilar, Aurora; Henning, Thomas; Dullemond, Cornelis P.; Bouwman, Jeroen; Sturm, Bernhard; Patel, Nimesh; Juhász, Attila

    2011-01-01

    We present Spitzer/Infrared Spectrograph spectra of 31 T Tauri stars (TTS) and IRAM/1.3 mm observations for 34 low- and intermediate-mass stars in the Cep OB2 region. Including our previously published data, we analyze 56 TTS and 3 intermediate-mass stars with silicate features in Tr 37 (∼4 Myr) and NGC 7160 (∼12 Myr). The silicate emission features are well reproduced with a mixture of amorphous (with olivine, forsterite, and silica stoichiometry) and crystalline grains (forsterite, enstatite). We explore grain size and disk structure using radiative transfer disk models, finding that most objects have suffered substantial evolution (grain growth, settling). About half of the disks show inside-out evolution, with either dust-cleared inner holes or a radially dependent dust distribution, typically with larger grains and more settling in the innermost disk. The typical strong silicate features nevertheless require the presence of small dust grains, and could be explained by differential settling according to grain size, anomalous dust distributions, and/or optically thin dust populations within disk gaps. M-type stars tend to have weaker silicate emission and steeper spectral energy distributions than K-type objects. The inferred low dust masses are in a strong contrast with the relatively high gas accretion rates, suggesting global grain growth and/or an anomalous gas-to-dust ratio. Transition disks in the Cep OB2 region display strongly processed grains, suggesting that they are dominated by dust evolution and settling. Finally, the presence of rare but remarkable disks with strong accretion at old ages reveals that some very massive disks may still survive to grain growth, gravitational instabilities, and planet formation.

  10. Modeling Precipitating Tub (Settling Basin) For Reduction Sedimentation Effect in Irrigation Channel at Micro Hydro Power (Case Study At Gorontalo Province Irrigation Channel)

    OpenAIRE

    Arifin Matoka; Nadjamuddin H; Salama M; M. Arsyad T

    2016-01-01

    Potential irrigation channels widely in Indonesia and suitable for turbine type Plopeler Open Flume. From observation this sedimentation processes was effect on turbin and quality electric power generated. This study was determine the relationship effect of sedimentation on parameter MHP and modeling sedimentation basin to reduce its influence. The settling basin modeling into 3 design models and 2 codition,. MHP conditions in the rain without modeling with the data voltage dev...

  11. Settling of abutments into implants and changes in removal torque in five different implant-abutment connections. Part 1: Cyclic loading.

    Science.gov (United States)

    Kim, Ki-Seong; Han, Jung-Suk; Lim, Young-Jun

    2014-01-01

    The aim of this study was to evaluate and compare the settling of abutments into implants and the removal torque values (RTVs) before and after cyclic loading. Five different implant-abutment connections were tested: Ext = external butt joint + two-piece abutment; Int-H2 = internal hexagon + two-piece abutment; Int-H1 = internal hexagon + one-piece abutment; Int-O2 = internal octagon + two-piece abutment; and Int-O1 = internal octagon + one-piece abutment. Ten abutments from each group were secured to their corresponding implants (total n = 50). All samples were tested in a universal testing machine with a vertical load of 250 N for 100,000 cycles of 14 Hz. The amount of settling of the abutment into the implant was calculated from the change in the total length of the implant-abutment sample before and after loading, as measured with an electronic digital micrometer. The RTV after cyclic loading was compared to the initial RTV with a digital torque gauge. Statistical analysis was performed at a 5% significance level. A multiple-comparison test showed specific significant differences in settling values in each group after 250 N cyclic loading (Int-H1, Ext abutment type and related to the design characteristics of the implant-abutment connection.

  12. Electrostatic settling of catalyst particles in hydrogenation of methyl benzoate. Denkai chinkoho ni yoru ansokukosan mechiru suisoka hannoeki kara no shokubai ryushi bunri

    Energy Technology Data Exchange (ETDEWEB)

    Kato, K. (Japan Energy Corp., Tokyo (Japan). Central Research Lab.)

    1994-03-01

    As benzyl alcohol (BA), which is one of the simplest alcohol having aromatic ring, has been used widely for the fields related to soap, perfume and chemicals industry, its usage has not always been so much because of its expensiveness. Authors developed previously a new process technique to produce cheaper and higher purity BA not through chlorination process using toluene as its raw materials. The BA can be obtained by hydrogenating methyl benzoate (MB) at a dispersion babble tower using cupper-chromium type powder catalyst in mixed solvent of methanol and toluene. The catalyst becomes much fine particles after the reaction. In this study, it is examined to separate MB hydrogenation reaction solution obtained by electrostatic settling into solid and liquid phases as an aim to improve the BA production process. Rate of electrostatic settling does not depend upon solid concentration, slurry forming conditions, electrode materials, specific resistance of slurry layer and others, but is in proportion to electric field intensity. Furthermore, process of the electrostatic settling is expressed by an equation. 9 refs., 9 figs., 3 tabs.

  13. Settling of isolated particles and of suspensions in a shear-thinning medium; Sedimentation de particules isolees et de suspensions en milieu rheofluidifiant

    Energy Technology Data Exchange (ETDEWEB)

    Daugan, S.

    2002-11-01

    After drawing up a balance sheet of current knowledge of settling of particles and suspensions in Newtonian and non Newtonian fluids, we introduce the characterisation of the fluid-particles system and especially the shear-thinning behavior of Xanthan solutions. This experimental study is organised into two parts. First of all, we study the settling behavior of a few particles falling along their line of centres. The conditions for particles aggregation with respect to the rheological properties of the suspending fluid are systematically reported. To that extent, rheological relaxation experiments are performed. Once aggregated, the particles velocities are much more important that the velocity of a single one. We show that a simple model, based on the Newtonian case, allows to predict the position and the velocity of each particle with respect to the initial separation distance between them. The second part of this work is devoted to the study of the settling behavior of spherical and monodisperse particles suspensions according to the particles volume fraction, the polymer concentration of the suspending fluid and the geometry of the sedimenting cell. From a model giving the particle volume fraction as a function of the luminous intensity transmitted by the suspension, we show that three regimes of different kinetics occur. During the second regime, the particle volume fraction decreases exponentially with time and the observed phenomena are very fast. Finally, we study the spatial structuration of the suspension and we link it to the topography of the sediment obtained at the end of the sedimentation. (author)

  14. Dynamics of two disks settling in a two-dimensional narrow channel: From periodic motion to vertical chain in Oldroyd-B fluid

    Science.gov (United States)

    Pan, Tsorng-Whay; Glowinski, Roland

    2016-11-01

    In this talk we present a numerical study of the dynamics of two disks settling in a narrow vertical channel filled with an Oldroyd-B fluid. Two kinds of particle dynamics are obtained: (i) periodic interaction between two disks and (ii) the formation of the chain of two disks. For the periodic interaction of two disks, two different motions are obtained: (a) two disks stay far apart and interact is periodically, which is similar to one of the motions of two disks settling in a narrow channel filled with a Newtonian fluid discussed by Aidun & Ding and (b) two disks draft, kiss and break away periodically and the chain is not formed due to not strong enough elastic force. For the formation of two disk chain occurred at higher values of the elasticity number, it is either a tilted chain or a vertical chain. The tilted chain can be obtained for either that the elasticity number is less than the critical value for having the vertical chain or that the Mach number is greater than the critical value for a long body to fall broadside-on, which is consistent with the results for the elliptic particles settling in Oldroyd-B fluids. NSF.

  15. Extracellular polymeric substances (EPS) producing bacterial strains of municipal wastewater sludge: isolation, molecular identification, EPS characterization and performance for sludge settling and dewatering.

    Science.gov (United States)

    Bala Subramanian, S; Yan, S; Tyagi, R D; Surampalli, R Y

    2010-04-01

    Wastewater treatment plants often face the problems of sludge settling mainly due to sludge bulking. Generally, synthetic organic polymer and/or inorganic coagulants (ferric chloride, alum and quick lime) are used for sludge settling. These chemicals are very expensive and further pollute the environment. Whereas, the bioflocculants are environment friendly and may be used to flocculate the sludge. Extracellular polymeric substances (EPS) produced by sludge microorganisms play a definite role in sludge flocculation. In this study, 25 EPS producing strains were isolated from municipal wastewater treatment plant. Microorganisms were selected based on EPS production properties on solid agar medium. Three types of EPS (slime, capsular and bacterial broth mixture of both slime and capsular) were harvested and their characteristics were studied. EPS concentration (dry weight), viscosity and their charge (using a Zetaphoremeter) were also measured. Bioflocculability of obtained EPS was evaluated by measuring the kaolin clay flocculation activity. Six bacterial strains (BS2, BS8, BS9, BS11, BS15 and BS25) were selected based on the kaolin clay flocculation. The slime EPS was better for bioflocculation than capsular EPS and bacterial broth. Therefore, extracted slime EPS (partially purified) from six bacterial strains was studied in terms of sludge settling [sludge volume index (SVI)] and dewatering [capillary suction time (CST)]. Biopolymers produced by individual strains substantially improved dewaterability. The extracted slime EPS from six different strains were partially characterized. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  16. Geochemistry of mercury and other constituents in subsurface sediment—Analyses from 2011 and 2012 coring campaigns, Cache Creek Settling Basin, Yolo County, California

    Science.gov (United States)

    Arias, Michelle R.; Alpers, Charles N.; Marvin-DiPasquale, Mark C.; Fuller, Christopher C.; Agee, Jennifer L.; Sneed, Michelle; Morita, Andrew Y.; Salas, Antonia

    2017-10-31

    Cache Creek Settling Basin was constructed in 1937 to trap sediment from Cache Creek before delivery to the Yolo Bypass, a flood conveyance for the Sacramento River system that is tributary to the Sacramento–San Joaquin Delta. Sediment management options being considered by stakeholders in the Cache Creek Settling Basin include sediment excavation; however, that could expose sediments containing elevated mercury concentrations from historical mercury mining in the watershed. In cooperation with the California Department of Water Resources, the U.S. Geological Survey undertook sediment coring campaigns in 2011–12 (1) to describe lateral and vertical distributions of mercury concentrations in deposits of sediment in the Cache Creek Settling Basin and (2) to improve constraint of estimates of the rate of sediment deposition in the basin.Sediment cores were collected in the Cache Creek Settling Basin, Yolo County, California, during October 2011 at 10 locations and during August 2012 at 5 other locations. Total core depths ranged from approximately 4.6 to 13.7 meters (15 to 45 feet), with penetration to about 9.1 meters (30 feet) at most locations. Unsplit cores were logged for two geophysical parameters (gamma bulk density and magnetic susceptibility); then, selected cores were split lengthwise. One half of each core was then photographed and archived, and the other half was subsampled. Initial subsamples from the cores (20-centimeter composite samples from five predetermined depths in each profile) were analyzed for total mercury, methylmercury, total reduced sulfur, iron speciation, organic content (as the percentage of weight loss on ignition), and grain-size distribution. Detailed follow-up subsampling (3-centimeter intervals) was done at six locations along an east-west transect in the southern part of the Cache Creek Settling Basin and at one location in the northern part of the basin for analyses of total mercury; organic content; and cesium-137, which was

  17. Reflections on the role of consultant radiographers in the UK: The perceived impact on practice and factors that support and hinder the role

    International Nuclear Information System (INIS)

    Henwood, S.; Booth, L.; Miller, P.K.

    2016-01-01

    Study context: This paper is the third paper arising from a two year long, in-depth case study exploring various components of the role of consultant radiographers in the UK. This paper focuses particularly upon the perceived impact of the role and factors that support and hinder the role in practice. Methods: A longitudinal case study method was used to explore the role of consultant radiographers. Interviewing was informed and guided by a phenomenological approach to promote a deeper understanding of consultants' experiences in the role. Eight consultant radiographers participated, with six involved throughout the whole study. Over an 18 month period each of those six consultants was interviewed three times. Two consultants only participated in the first interview; these interviews are also reported here. A total of 20 interviews were conducted. Findings: Interviews explored the impact of the consultant role as perceived by consultants themselves, and encouraged individual reflection on factors which had both supported and hindered success therein. Analysis demonstrated that there was substantial variation in the experiences communicated yet, and without any exception, all consultants reported that the introduction of their role had been beneficial to service delivery and quality of patient care. A number of obstacles were outlined, as well as a range of support mechanisms. Recommendations are thus made as to how the consultant role might be more effectively supported in the future. - Highlights: • The perceived impact of the consultant radiographer role in practice. • Reflections upon what supported the consultants in their role. • Reflections upon what hindered the consultants in their role.

  18. The Attitude of Math Teachers toward Cooperative Learning and Institutional Elements that May Help or Hinder its Use as a Teaching Methodology

    Directory of Open Access Journals (Sweden)

    Luis Gerardo Meza-Cascante

    2015-01-01

    Full Text Available This paper presents the results of research conducted in high schools in the central region of the Cartago province, Costa Rica. The goal of the research was to determine the attitude of high school math teachers toward cooperative learning in math and identify factors in secondary education institutions that can help or hinder the implementation of cooperative learning as a strategy for teaching mathematics. The research was conducted with 39 secondary education math teachers, who participated in a workshop on cooperative learning in mathematics. The attitude toward this methodology was measured by using semantic differential. This information was triangulated with data obtained from non-participant observation. A combination of in-depth interviews and non-participant observation was used to access data that identifies institutional factors helping or hindering the implementation of math cooperative learning. Findings suggest a positive attitude from teachers toward integrating cooperative work as a teaching strategy to promote math learning and toward the role played by school principals in the adoption of educational innovations. It also reveals that high schools have adequate material conditions to implement the methodology, although the need for training is considered. This finding should be taken into account by the proponents of this methodological option.

  19. The inhibition of lactate dehydrogenase A hinders the transcription of histone 2B gene independently from the block of aerobic glycolysis

    International Nuclear Information System (INIS)

    Brighenti, Elisa; Carnicelli, Domenica; Brigotti, Maurizio; Fiume, Luigi

    2017-01-01

    Most cancer cells use aerobic glycolysis to fuel their growth and many efforts are made to selectively block this metabolic pathway in cancer cells by inhibiting lactate dehydrogenase A (LDHA). However, LDHA is a moonlighting protein which exerts functions also in the nucleus as a factor associated to transcriptional complexes. Here we found that two small molecules which inhibit the enzymatic activity of LDHA hinder the transcription of histone 2B gene independently from the block of aerobic glycolysis. Moreover, we observed that silencing this gene reduces cell replication, hence suggesting that the inhibition of LDHA can also affect the proliferation of normal non-glycolysing dividing cells. - Highlights: • Blocking aerobic glycolysis is an approach to impair proliferation of cancer cells. • Small inhibitors of LDHA block aerobic glycolysis. • LDHA is also involved in the transcription of histone 2B gene. • LDHA inhibitors block histone 2B transcription. • LDHA inhibitors can hinder the proliferation also of non-glycolysing normal cells.

  20. Examination of near-wall hindered Brownian diffusion of nanoparticles: Experimental comparison to theories by Brenner (1961) and Goldman et al. (1967)

    International Nuclear Information System (INIS)

    Choi, C. K.; Margraves, C. H.; Kihm, K. D.

    2007-01-01

    Multilayered distributions of hindered mean square displacement (MSD) for nanoparticles are measured in the near-wall region within 500 nm from the solid surface using total internal reflection fluorescence microscopy, an evanescent wave microscopic imaging technique. Examined particles are yellow-green (505/515) polystyrene fluorescent nanospheres of 100, 250, and 500 nm radii with a specific gravity of 1.055. To ensure the measurement accuracy, special care is taken to minimize photobleaching of fluorescent particles by adding neutral density filters to optimally reduce the excitation power. The experimental results for parallel MSDs to the solid surface validate the theory of hindered diffusion [A. J. Goldman, R. G. Cox, and H. Brenner, 'Slow viscous motion of a sphere parallel to a plane - I: Motion through a quiescent fluid', Chem. Eng. Sci. 22, 637 (1967)] of spheres based on viscous slow-down in the near-wall region. It is also reported that the effect of adding sodium chloride up to 10 mM to the solution has little effect on the parallel diffusive motion of the tested nanoparticles. Experimental evidence shows that normal MSDs, for submicroscopic charged nanoparticles, are substantially different from Einstein's 2DΔt due to the deterministic motion arising from electrostatic forces

  1. Field estimates of floc dynamics and settling velocities in a tidal creek with significant along-channel gradients in velocity and SPM

    Science.gov (United States)

    Schwarz, C.; Cox, T.; van Engeland, T.; van Oevelen, D.; van Belzen, J.; van de Koppel, J.; Soetaert, K.; Bouma, T. J.; Meire, P.; Temmerman, S.

    2017-10-01

    A short-term intensive measurement campaign focused on flow, turbulence, suspended particle concentration, floc dynamics and settling velocities were carried out in a brackish intertidal creek draining into the main channel of the Scheldt estuary. We compare in situ estimates of settling velocities between a laser diffraction (LISST) and an acoustic Doppler technique (ADV) at 20 and 40 cm above bottom (cmab). The temporal variation in settling velocity estimated were compared over one tidal cycle, with a maximum flood velocity of 0.46 m s-1, a maximum horizontal ebb velocity of 0.35 m s-1 and a maximum water depth at high water slack of 2.41 m. Results suggest that flocculation processes play an important role in controlling sediment transport processes in the measured intertidal creek. During high-water slack, particles flocculated to sizes up to 190 μm, whereas at maximum flood and maximum ebb tidal stage floc sizes only reached up to 55 μm and 71 μm respectively. These large differences indicate that flocculation processes are mainly governed by turbulence-induced shear rate. In this study, we specifically recognize the importance of along-channel gradients that places constraints on the application of the acoustic Doppler technique due to conflicts with the underlying assumptions. Along-channel gradients were assessed by additional measurements at a second location and scaling arguments which could be used as an indication whether the Reynolds-flux method is applicable. We further show the potential impact of along-channel advection of flocs out of equilibrium with local hydrodynamics influencing overall floc sizes.

  2. The effects of gamma irradiation on the fate of hindered phenol antioxidants in food contact polymers. Analytical and 14C-labelling studies

    International Nuclear Information System (INIS)

    Allen, D.W.; Leathard, D.A.; Smith, C.

    1991-01-01

    The extractable levels of two hindered phenol antioxidants (Irganox 1076 and Irganox 1010) present in PVC, polyethylene and polypropylene have been monitored by HPLC techniques following progressive exposure of the polymers to 60 Co(gamma) radiation. There is a gradual diminution in the extractable levels of each antioxidant as irradiation progresses as a result of transformation of the antioxidants in the oxidation reactions ensuing during irradiation. Experiments involving the use of a 14 C-labelled sample of Irganox 1076 in polyolefins have provided evidence of covalent binding of antioxidant degradation products to the polymer following gamma irradiation. However, there is also evidence of the formation of extractable degradation products, the identity of which is as yet unknown. (author)

  3. The effects of gamma irradiation on the fate of hindered phenol antioxidants in food contact polymers. Analytical and 14C-labelling studies

    Science.gov (United States)

    Allen, David W.; Leathard, David A.; Smith, Christine

    The extractable levels of two hindered phenol antioxidants (Irganox 1076 and Irganox 1010) present in PVC, polyethylene and polypropylene, have been monitored by HPLC techniques following progressive exposure of the polymers to 60Co γ radiation. There is a gradual diminution in the extractable levels of each antioxidant as irradiation progresses as a result of transformation of the antioxidants in the oxidation reactions ensuing during irradiation. Experiments involving the use of a 14C-labelled sample of Irganox 1076 in polyolefins have provided evidence of covalent binding of antioxidant degradation products to the polymer following gamma irradiation. However, there is also evidence of the formation of extractable degradation products, the identity of which is as yet unknown.

  4. Highly efficient aerobic oxidation of alcohols by using less-hindered nitroxyl-radical/copper catalysis: optimum catalyst combinations and their substrate scope.

    Science.gov (United States)

    Sasano, Yusuke; Kogure, Naoki; Nishiyama, Tomohiro; Nagasawa, Shota; Iwabuchi, Yoshiharu

    2015-04-01

    The oxidation of alcohols into their corresponding carbonyl compounds is one of the most fundamental transformations in organic chemistry. In our recent report, 2-azaadamantane N-oxyl (AZADO)/copper catalysis promoted the highly chemoselective aerobic oxidation of unprotected amino alcohols into amino carbonyl compounds. Herein, we investigated the extension of the promising AZADO/copper-catalyzed aerobic oxidation of alcohols to other types of alcohol. During close optimization of the reaction conditions by using various alcohols, we found that the optimum combination of nitroxyl radical, copper salt, and solution concentration was dependent on the type of substrate. Various alcohols, including highly hindered and heteroatom-rich ones, were efficiently oxidized into their corresponding carbonyl compounds under mild conditions with lower amounts of the catalysts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Septin 7 reduces nonmuscle myosin IIA activity in the SNAP23 complex and hinders GLUT4 storage vesicle docking and fusion

    Energy Technology Data Exchange (ETDEWEB)

    Wasik, Anita A.; Dumont, Vincent [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland); Tienari, Jukka [Department of Pathology, University of Helsinki and Helsinki University Hospital, 00290 Helsinki, 05850 Hyvinkää (Finland); Nyman, Tuula A. [Institute of Biotechnology, University of Helsinki, 00014 Helsinki (Finland); Fogarty, Christopher L.; Forsblom, Carol; Lehto, Markku [Folkhälsan Institute of Genetics, Folkhälsan Research Center, 00290 Helsinki (Finland); Abdominal Center Nephrology, University of Helsinki and Helsinki University Hospital, 000290 Helsinki (Finland); Diabetes& Obesity Research Program, Research Program´s Unit, 00014 University of Helsinki (Finland); Lehtonen, Eero [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland); Laboratory Animal Centre, University of Helsinki, 00014 Helsinki (Finland); Groop, Per-Henrik [Folkhälsan Institute of Genetics, Folkhälsan Research Center, 00290 Helsinki (Finland); Abdominal Center Nephrology, University of Helsinki and Helsinki University Hospital, 000290 Helsinki (Finland); Diabetes& Obesity Research Program, Research Program´s Unit, 00014 University of Helsinki (Finland); Baker IDI Heart & Diabetes Institute, 3004 Melbourne (Australia); Lehtonen, Sanna, E-mail: sanna.h.lehtonen@helsinki.fi [Department of Pathology, University of Helsinki, 00014 Helsinki (Finland)

    2017-01-15

    Glomerular epithelial cells, podocytes, are insulin responsive and can develop insulin resistance. Here, we demonstrate that the small GTPase septin 7 forms a complex with nonmuscle myosin heavy chain IIA (NMHC-IIA; encoded by MYH9), a component of the nonmuscle myosin IIA (NM-IIA) hexameric complex. We observed that knockdown of NMHC-IIA decreases insulin-stimulated glucose uptake into podocytes. Both septin 7 and NM-IIA associate with SNAP23, a SNARE protein involved in GLUT4 storage vesicle (GSV) docking and fusion with the plasma membrane. We observed that insulin decreases the level of septin 7 and increases the activity of NM-IIA in the SNAP23 complex, as visualized by increased phosphorylation of myosin regulatory light chain. Also knockdown of septin 7 increases the activity of NM-IIA in the complex. The activity of NM-IIA is increased in diabetic rat glomeruli and cultured human podocytes exposed to macroalbuminuric sera from patients with type 1 diabetes. Collectively, the data suggest that the activity of NM-IIA in the SNAP23 complex plays a key role in insulin-stimulated glucose uptake into podocytes. Furthermore, we observed that septin 7 reduces the activity of NM-IIA in the SNAP23 complex and thereby hinders GSV docking and fusion with the plasma membrane. - Highlights: • Septin 7, nonmuscle myosin heavy chain IIA (NMHC-IIA) and SNAP23 form a complex. • Knockdown of septin 7 increases NM-IIA activity in the SNAP23 complex. • Insulin decreases septin 7 level and increases NM-IIA activity in the SNAP23 complex. • Septin 7 hinders GSV docking/fusion by reducing NM-IIA activity in the SNAP23 complex.

  6. Septin 7 reduces nonmuscle myosin IIA activity in the SNAP23 complex and hinders GLUT4 storage vesicle docking and fusion

    International Nuclear Information System (INIS)

    Wasik, Anita A.; Dumont, Vincent; Tienari, Jukka; Nyman, Tuula A.; Fogarty, Christopher L.; Forsblom, Carol; Lehto, Markku; Lehtonen, Eero; Groop, Per-Henrik; Lehtonen, Sanna

    2017-01-01

    Glomerular epithelial cells, podocytes, are insulin responsive and can develop insulin resistance. Here, we demonstrate that the small GTPase septin 7 forms a complex with nonmuscle myosin heavy chain IIA (NMHC-IIA; encoded by MYH9), a component of the nonmuscle myosin IIA (NM-IIA) hexameric complex. We observed that knockdown of NMHC-IIA decreases insulin-stimulated glucose uptake into podocytes. Both septin 7 and NM-IIA associate with SNAP23, a SNARE protein involved in GLUT4 storage vesicle (GSV) docking and fusion with the plasma membrane. We observed that insulin decreases the level of septin 7 and increases the activity of NM-IIA in the SNAP23 complex, as visualized by increased phosphorylation of myosin regulatory light chain. Also knockdown of septin 7 increases the activity of NM-IIA in the complex. The activity of NM-IIA is increased in diabetic rat glomeruli and cultured human podocytes exposed to macroalbuminuric sera from patients with type 1 diabetes. Collectively, the data suggest that the activity of NM-IIA in the SNAP23 complex plays a key role in insulin-stimulated glucose uptake into podocytes. Furthermore, we observed that septin 7 reduces the activity of NM-IIA in the SNAP23 complex and thereby hinders GSV docking and fusion with the plasma membrane. - Highlights: • Septin 7, nonmuscle myosin heavy chain IIA (NMHC-IIA) and SNAP23 form a complex. • Knockdown of septin 7 increases NM-IIA activity in the SNAP23 complex. • Insulin decreases septin 7 level and increases NM-IIA activity in the SNAP23 complex. • Septin 7 hinders GSV docking/fusion by reducing NM-IIA activity in the SNAP23 complex.

  7. Thiamethoxam and imidacloprid drench applications on sweet orange nursery trees disrupt the feeding and settling behaviour of Diaphorina citri (Hemiptera: Liviidae).

    Science.gov (United States)

    Miranda, Marcelo P; Yamamoto, Pedro T; Garcia, Rafael B; Lopes, João Pa; Lopes, João Rs

    2016-09-01

    Chemical control is the method most used for management of Diaphorina citri, the vector of the phloem-limited bacteria associated with citrus huanglongbing (HLB) disease. The objectives of this study were to determine the influence of soil-drench applications of neonicotinoids (thiamethoxam and imidacloprid) on the probing behaviour of D. citri on citrus nursery trees, using the electrical penetration graph (EPG) technique, and to measure the D. citri settling behaviour after probing on citrus nursery trees that had received these neonicotinoid treatments. The drench applications of neonicotinoids on citrus nursery trees disrupt D. citri probing, mainly for EPG variables related to phloem sap ingestion, with a significant reduction (≈90%) in the duration of this activity compared with untreated plants in all assessment periods (15, 35 and 90 days after application). Moreover, both insecticides have a repellent effect on D. citri, resulting in significant dispersal of psyllids from treated plants. This study clearly demonstrates the interference of soil-applied neonicotinoids on the feeding and settling behaviour of D. citri on citrus nursery trees, mainly during the phloem ingestion phase. These findings reinforce the recommendation of drench application of neonicotinoids before planting nursery trees as a useful strategy for HLB management. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  8. Stability of engineered nanomaterials in complex aqueous matrices: Settling behaviour of CeO{sub 2} nanoparticles in natural surface waters

    Energy Technology Data Exchange (ETDEWEB)

    Van Koetsem, Frederik, E-mail: Frederik.VanKoetsem@UGent.be [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Verstraete, Simon [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Van der Meeren, Paul [Particle and Interfacial Technology Group, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Du Laing, Gijs, E-mail: Gijs.DuLaing@UGent.be [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium)

    2015-10-15

    The stability of engineered nanoparticles (ENPs) in complex aqueous matrices is a key determinant of their fate and potential toxicity towards the aquatic environment and human health. Metal oxide nanoparticles, such as CeO{sub 2} ENPs, are increasingly being incorporated into a wide range of industrial and commercial applications, which will undoubtedly result in their (unintentional) release into the environment. Hereby, the behaviour and fate of CeO{sub 2} ENPs could potentially serve as model for other nanoparticles that possess similar characteristics. The present study examined the stability and settling of CeO{sub 2} ENPs (7.3±1.4 nm) as well as Ce{sup 3+} ions in 10 distinct natural surface waters during 7 d, under stagnant and isothermal experimental conditions. Natural water samples were collected throughout Flanders (Belgium) and were thoroughly characterized. For the majority of the surface waters, a substantial depletion (>95%) of the initially added CeO{sub 2} ENPs was observed just below the liquid surface of the water samples after 7 d. In all cases, the reduction was considerably higher for CeO{sub 2} ENPs than for Ce{sup 3+} ions (<68%). A first-order kinetics model was able to describe the observed time-dependant removal of both CeO{sub 2} ENPs (R{sup 2}≥0.998) and Ce{sup 3+} ions (R{sup 2}≥0.812) from the water column, at least in case notable sedimentation occurred over time. Solution-pH appeared to be a prime parameter governing nanoparticle colloidal stability. Moreover, the suspended solids (TSS) content also seemed to be an important factor affecting the settling rate and residual fraction of CeO{sub 2} ENPs as well as Ce{sup 3+} ions in natural surface waters. Correlation results also suggest potential association and co-precipitation of CeO{sub 2} ENPs with aluminium- and iron-containing natural colloidal material. The CeO{sub 2} ENPs remained stable in dispersion in surface water characterized by a low pH, ionic strength (IS), and

  9. Personal interests hinder Rail Baltica

    Index Scriptorium Estoniae

    2011-01-01

    Läti seimi liige Janis Reirs leiab, et Rail Baltica ehitus on Moskva ja Riia vahelise raudtee ehitusest prioriteetsem, kuna esimest võib potentsiaalselt finantseerida Euroopa Liit. Transpordiminister Uldis Augulis kohtub oma Venemaa kolleegi Igor Levitiniga 7. aprillil. Peaminister Valdis Dombrovskise sõnul vajavad mõlemad projektid majandusanalüüsi

  10. Study of the diversity of microbial communities in a sequencing batch reactor oxic-settling-anaerobic process and its modified process.

    Science.gov (United States)

    Sun, Lianpeng; Chen, Jianfan; Wei, Xiange; Guo, Wuzhen; Lin, Meishan; Yu, Xiaoyu

    2016-05-01

    To further reveal the mechanism of sludge reduction in the oxic-settling-anaerobic (OSA) process, the polymerase chain reaction - denaturing gradient gel electrophoresis protocol was used to study the possible difference in the microbial communities between a sequencing batch reactor (SBR)-OSA process and its modified process, by analyzing the change in the diversity of the microbial communities in each reactor of both systems. The results indicated that the structure of the microbial communities in aerobic reactors of the 2 processes was very different, but the predominant microbial populations in anaerobic reactors were similar. The predominant microbial population in the aerobic reactor of the SBR-OSA belonged to Burkholderia cepacia, class Betaproteobacteria, while those of the modified process belonged to the classes Alphaproteobacteria, Betaproteobacteria, and Gammaproteobacteria. These 3 types of microbes had a cryptic growth characteristic, which was the main cause of a greater sludge reduction efficiency achieved by the modified process.

  11. Seasonal and interannual variations of biological performances of newly settled juvenile plaice Pleuronectes platessa during the spring period on an intertidal sandy beach

    Directory of Open Access Journals (Sweden)

    Rachid Amara

    2015-10-01

    Full Text Available Habitat quality of an intertidal nursery ground in the eastern Channel for 0-group plaice Pleuronectes platessa was investigated by following settlement, condition and growth during seven years (2005 to 2007 and 2010 to 2013 between March to June. Plaice settlement period extended from mid-March to late May and both date of pic of settlement and plaice densities varied between years. Fulton K, RNA:DNA and recent otolith growth indices were above the established baseline value for nutritional stress, indicating that newly settled plaice were in relatively high condition and that food was not a limiting factor. We did not observe density-dependent growth at our study site, and the relatively high growth rates observed each year suggest minimal competition for food. Our study indicate that the Sainte Cécile nursery areas provide suitable conditions for growth and survival of early juvenile stages.

  12. Exchange of current BPA surplus power for future power from certain companies' share of WNP-3 to settle a dispute over construction delay. Record of decision. Volume I

    International Nuclear Information System (INIS)

    1985-01-01

    This Record of Decision (ROD) sets forth the Bonneville Power Administration's (BPA) reasons for settling litigation over the delay in constructing Washington Public Power Supply System (Supply System) Nuclear Project No. 3 (WNP-3). The litigation concerns the decision in May 1983 to defer construction until financing becomes available to the Supply System and a demonstrable need for the Project is established. The construction deferral was made at the request of the Administrator of BPA, a federal power marketing agency in the Pacific Northwest. BPA is obligated to pay principal and interest on bonds sold by the Supply System to finance 70 percent of the project. The construction delay was opposed by the project's minority owners, four Northwest investor-owned utilities (companies) which collectively own 30 percent of the project

  13. Final Report - Crystal Settling, Redox, and High Temperature Properties of ORP HLW and LAW Glasses, VSL-09R1510-1, Rev. 0, dated 6/18/09

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Albert A.; Wang, C.; Gan, H.; Pegg, I. L.; Chaudhuri, M.; Kot, W.; Feng, Z.; Viragh, C.; McKeown, D. A.; Joseph, I.; Muller, I. S.; Cecil, R.; Zhao, W.

    2013-11-13

    The radioactive tank waste treatment programs at the U. S. Department of Energy (DOE) have featured joule heated ceramic melter technology for the vitrification of high level waste (HLW). The Hanford Tank Waste Treatment and Immobilization Plant (WTP) employs this same basic technology not only for the vitrification of HLW streams but also for the vitrification of Low Activity Waste (LAW) streams. Because of the much greater throughput rates required of the WTP as compared to the vitrification facilities at the West Valley Demonstration Project (WVDP) or the Defense Waste Processing Facility (DWPF), the WTP employs advanced joule heated melters with forced mixing of the glass pool (bubblers) to improve heat and mass transport and increase melting rates. However, for both HLW and LAW treatment, the ability to increase waste loadings offers the potential to significantly reduce the amount of glass that must be produced and disposed and, therefore, the overall project costs. This report presents the results from a study to investigate several glass property issues related to WTP HLW and LAW vitrification: crystal formation and settling in selected HLW glasses; redox behavior of vanadium and chromium in selected LAW glasses; and key high temperature thermal properties of representative HLW and LAW glasses. The work was conducted according to Test Plans that were prepared for the HLW and LAW scope, respectively. One part of this work thus addresses some of the possible detrimental effects due to considerably higher crystal content in waste glass melts and, in particular, the impact of high crystal contents on the flow property of the glass melt and the settling rate of representative crystalline phases in an environment similar to that of an idling glass melter. Characterization of vanadium redox shifts in representative WTP LAW glasses is the second focal point of this work. The third part of this work focused on key high temperature thermal properties of

  14. Three-Dimensional Sediment Dynamics in Well-Mixed Estuaries: Importance of the Internally Generated Overtide, Spatial Settling Lag, and Gravitational Circulation

    Science.gov (United States)

    Wei, Xiaoyan; Kumar, Mohit; Schuttelaars, Henk M.

    2018-02-01

    To investigate the dominant sediment transport and trapping mechanisms, a semi-analytical three-dimensional model is developed resolving the dynamic effects of salt intrusion on sediment in well-mixed estuaries in morphodynamic equilibrium. As a study case, a schematized estuary with a converging width and a channel-shoal structure representative for the Delaware estuary is considered. When neglecting Coriolis effects, sediment downstream of the estuarine turbidity maximum (ETM) is imported into the estuary through the deeper channel and exported over the shoals. Within the ETM region, sediment is transported seaward through the deeper channel and transported landward over the shoals. The largest contribution to the cross-sectionally integrated seaward residual sediment transport is attributed to the advection of tidally averaged sediment concentrations by river-induced flow and tidal return flow. This contribution is mainly balanced by the residual landward sediment transport due to temporal correlations between the suspended sediment concentrations and velocities at the M2 tidal frequency. The M2 sediment concentration mainly results from spatial settling lag effects and asymmetric bed shear stresses due to interactions of M2 bottom velocities and the internally generated M4 tidal velocities, as well as the salinity-induced residual currents. Residual advection of tidally averaged sediment concentrations also plays an important role in the landward sediment transport. Including Coriolis effects hardly changes the cross-sectionally integrated sediment balance, but results in a landward (seaward) sediment transport on the right (left) side of the estuary looking seaward, consistent with observations from literature. The sediment transport/trapping mechanisms change significantly when varying the settling velocity and river discharge.

  15. Factors associated with mental disorders in long-settled war refugees: refugees from the former Yugoslavia in Germany, Italy and the UK.

    Science.gov (United States)

    Bogic, Marija; Ajdukovic, Dean; Bremner, Stephen; Franciskovic, Tanja; Galeazzi, Gian Maria; Kucukalic, Abdulah; Lecic-Tosevski, Dusica; Morina, Nexhmedin; Popovski, Mihajlo; Schützwohl, Matthias; Wang, Duolao; Priebe, Stefan

    2012-03-01

    Prevalence rates of mental disorders are frequently increased in long-settled war refugees. However, substantial variation in prevalence rates across studies and countries remain unexplained. To test whether the same sociodemographic characteristics, war experiences and post-migration stressors are associated with mental disorders in similar refugee groups resettled in different countries. Mental disorders were assessed in war-affected refugees from the former Yugoslavia in Germany, Italy and the UK. Sociodemographic, war-related and post-migration characteristics were tested for their association with different disorders. A total of 854 war refugees were assessed (≥ 255 per country). Prevalence rates of mental disorders varied substantially across countries. A lower level of education, more traumatic experiences during and after the war, more migration-related stress, a temporary residence permit and not feeling accepted were independently associated with higher rates of mood and anxiety disorders. Mood disorders were also associated with older age, female gender and being unemployed, and anxiety disorders with the absence of combat experience. Higher rates of post-traumatic stress disorder (PTSD) were associated with older age, a lower level of education, more traumatic experiences during and after the war, absence of combat experience, more migration-related stress, and a temporary residence permit. Only younger age, male gender and not living with a partner were associated with substance use disorders. The associations did not differ significantly across the countries. War-related factors explained more variance in rates of PTSD, and post-migration factors in the rates of mood, anxiety and substance use disorder. Sociodemographic characteristics, war experiences and post-migration stressors are independently associated with mental disorders in long-settled war refugees. The risk factors vary for different disorders, but are consistent across host countries

  16. Currently used organophosphate flame retardants determined in the settled dust of masjids and hotels of Saudi Arabia, a new insight into human health implications of dust exposure.

    Science.gov (United States)

    Ali, Nadeem; Ibrahim Ismail, Iqbal Mohammad; Kadi, Mohammad W; Salem Ali Albar, Hussain Mohammed

    2018-05-23

    Indoor settled dust particles are considered as an important source of human exposure to chemicals such as organophosphate flame retardants (PFRs). In recent decades the Kingdom of Saudi Arabia (KSA) has experienced tremendous growth in population, as a result the number of masjids has also increased significantly to provide sufficient space for the public to offer prayers. The hospitality industry in KSA is also expanding to cater for the ever-increasing number of pilgrims visiting the two holy cities of the kingdom. However, limited data are available on the indoor pollution of masjids and hotels. In this study, PFRs were analyzed in the settled dust collected from various hotels and masjids of Jeddah, KSA. Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) and tris(1-chloro-2-propyl) phosphate (TCPP) were the major PFRs in masjid (median = 2490 and 2055 ngg-1) and hotel (median = 2360 and 3315 ngg-1) dust, respectively. A public health risk assessment was carried out by determining the incremental lifetime cancer risk (ILCR), and daily exposure via dust ingestion, inhalation, and dermal contact of PFRs. The calculated daily exposure via dust ingestion was well below the reference dose (RfD) values, and also the calculated hazardous quotient (HQ) and carcinogenic risk were well below the risk mark. However, the ILCR for PFRs was below the reference values of USEPA, which suggested that long-term exposure to these chemicals has a limited cause for concern. The study showed that the general public is exposed to PFRs in the studied microenvironments and the major exposure routes are dermal contact and ingestion.

  17. Bench-scale feasibility testing of pulsed-air technology for in-tank mixing of dry cementitious solids with tank liquids and settled solids

    International Nuclear Information System (INIS)

    Whyatt, G.A.; Hymas, C.R.

    1997-09-01

    This report documents the results of testing performed to determine the feasibility of using a pulsed-air mixing technology (equipment developed by Pulsair Systems, Inc., Bellevue, WA) to mix cementitious dry solids with supernatant and settled solids within a horizontal tank. The mixing technology is being considered to provide in situ stabilization of the open-quotes Vclose quotes tanks at the Idaho National Engineering and Environmental Laboratory (INEEL). The testing was performed in a vessel roughly 1/6 the scale of the INEEL tanks. The tests used a fine soil to simulate settled solids and water to simulate tank supernatants. The cementitious dry materials consisted of Portland cement and Aquaset-2H (a product of Fluid Tech Inc. consisting of clay and Portland cement). Two scoping tests were conducted to allow suitable mixing parameters to be selected. The scoping tests used only visual observations during grout disassembly to assess mixing performance. After the scoping tests indicated the approach may be feasible, an additional two mixing tests were conducted. In addition to visual observations during disassembly of the solidified grout, these tests included addition of chemical tracers and chemical analysis of samples to determine the degree of mixing uniformity achieved. The final two mixing tests demonstrated that the pulsed-air mixing technique is capable of producing slurries containing substantially more cementitious dry solids than indicated by the formulations suggested by INEEL staff. Including additional cement in the formulation may have benefits in terms of increasing mobilization of solids, reducing water separation during curing, and increasing the strength of the solidified product. During addition to the tank, the cementitious solids had a tendency to form clumps which broke down with continued mixing

  18. Manganese and lead levels in settled dust in elementary schools are correlated with biomarkers of exposure in school-aged children.

    Science.gov (United States)

    Rodrigues, Juliana L G; Bandeira, Matheus J; Araújo, Cecília F S; Dos Santos, Nathália R; Anjos, Ana Laura S; Koin, Ng Lai; Pereira, Laiz C; Oliveira, Sérgio S P; Mergler, Donna; Menezes-Filho, José A

    2018-05-01

    Previously, we showed that manganese (Mn) levels in settled dust in elementary schools increased at a rate of 34.1% per km closer to a ferro-manganese alloy plant in the rainy season. In this study, we investigated how this environmental pollution indicator varied in the dry season and if there was an association with Mn biomarker levels in school-aged children. Dust samples were collected with passive samplers (disposable Petri dishes) placed in interior and exterior environments of 14 elementary schools. Occipital hair, toenails and blood samples were collected from 173 students aged 7-12 years from three of these schools, with varying distance from the industrial plant. Mn and lead (Pb) levels were measured by graphite furnace atomic absorption spectrometry. Mn concentration geometric means (GM) in dust fall accumulation in interior environments of schools located at 2, 4, 6 and > 6 km-radii from the plant were 2212, 584, 625 and 224 μg Mn/m 2 /30 days, respectively. The modelled rate of change of dust Mn levels decreases by 59.8% for each km further from the plant. Pb levels in settled dust varied between 18 and 81 μg/m 2 /30 days with no association with distance from the plant. Blood lead levels median (range) were 1.2 μg/dL (0.2-15.6), of which 97.8% were children's age; and also with log MnTn (β = 2.31 × 10 -5 , p children exposure to Mn, independently of age, increases significantly with school proximity to the ferro-manganese alloy plant. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Hindered rotational energy barriers of BH4- tetrahedra in β-Mg(BH4)2 from quasielastic neutron scattering and DFT calculations

    DEFF Research Database (Denmark)

    Blanchard, Didier; Maronsson, Jon Bergmann; Riktor, M.D.

    2012-01-01

    , around the 2-fold (C2) and 3-fold (C3) axes were observed at temperatures from 120 to 440 K. The experimentally obtained activation energies (EaC2 = 39 and 76 meV and EaC3 = 214 meV) and mean residence times between reorientational jumps are comparable with the energy barriers obtained from DFT......In this work, hindered rotations of the BH4- tetrahedra in Mg(BH4)2 were studied by quasielastic neutron scattering, using two instruments with different energy resolution, in combination with density functional theory (DFT) calculations. Two thermally activated reorientations of the BH4- units...... calculations. A linear dependency of the energy barriers for rotations around the C2 axis parallel to the Mg-Mg axis with the distance between these two axes was revealed by the DFT calculations. At the lowest temperature (120 K) only 15% of the BH4- units undergo rotational motion and from comparison with DFT...

  20. What hinders healthcare professionals in promoting physical activity towards cancer patients? The influencing role of healthcare professionals' concerns, perceived patient characteristics and perceived structural factors.

    Science.gov (United States)

    Haussmann, Alexander; Gabrian, Martina; Ungar, Nadine; Jooß, Stefan; Wiskemann, Joachim; Sieverding, Monika; Steindorf, Karen

    2018-05-09

    Despite a large body of evidence showing that physical activity (PA) is beneficial to patients with cancer, healthcare professionals (HCPs) are promoting it too scarcely. Factors that hinder HCPs from promoting PA have remained understudied so far. Using a qualitative approach, this study aimed at a comprehensive description of influencing factors for HCPs' PA promotion behaviour and at identifying the reasons and mechanisms behind them. Semi-structured interviews with 30 HCPs were undertaken with a focus on concerns, patient characteristics and structural factors. Answers were analysed using thematic analysis. Results revealed that HCPs had concerns regarding a physical overexertion and psychological stress for patients with cancer. A patient's physical condition and the assumed interest in PA, often derived from former PA, turned out to be the most crucial patient characteristics influencing if PA is addressed. Structural factors relevant for PA promotion pertained to in-house structures, HCPs' workload, timing and coordination, information material for HCPs and patients and availability of exercise programs. In conclusion, this study revealed undetected concerns of HCPs and underlined the relevance of patient characteristics and structural conditions for HCPs' PA promotion towards patients with cancer. A broader perspective is needed to assess these factors in their influence on HCPs' PA promotion. © 2018 John Wiley & Sons Ltd.

  1. Arthritis patients' motives for (not) wanting to be involved in medical decision-making and the factors that hinder or promote patient involvement.

    Science.gov (United States)

    Nota, Ingrid; Drossaert, Constance H C; Taal, Erik; van de Laar, Mart A F J

    2016-05-01

    The aim of this study is to gain insight into arthritis patients' motives for (not) wanting to be involved in medical decision-making (MDM) and the factors that hinder or promote patient involvement. In-depth semi-structured interviews were conducted with 29 patients suffering from Rheumatoid Arthritis (RA). Many patients perceived the questions about involvement in MDM as difficult, mostly because they were unaware of having a choice. Shared decision-making (SDM) was generally preferred, but the preferred level of involvement varied between and within individuals. Preference regarding involvement may vary according to the type of treatment and the severity of the complaints. A considerable group of respondents would have liked more participation than they had experienced in the past. Perceived barriers could be divided into doctor-related (e.g. a paternalistic attitude), patient-related (e.g. lack of knowledge) and context-related (e.g. too little time to decide) factors. This study demonstrates the complexity of predicting patients' preferences regarding involvement in MDM: most RA patients prefer SDM, but their preference may vary according to the situation they are in and the extent to which they experience barriers in getting more involved. Unawareness of having a choice is still a major barrier for patient participation. The attending physician seems to have an important role as facilitator in enhancing patient participation by raising awareness and offering options, but implementing SDM is a shared responsibility; all parties need to be involved and educated.

  2. Solution-phase synthesis of a hindered N-methylated tetrapeptide using Bts-protected amino acid chlorides: efficient coupling and methylation steps allow purification by extraction.

    Science.gov (United States)

    Vedejs, E; Kongkittingam, C

    2000-04-21

    N-Benzothiazole-2-sulfonyl (Bts)-protected amino acid chlorides were used to prepare the hindered cyclosporin 8-11 tetrapeptide subunit 1. The synthesis was performed via 3a and the deprotected amines 5a, 13, and 19, including three repeated cycles involving N-methylation using iodomethane/potassium carbonate, deprotection of the Bts group, and N-acylation with a N-Bts-amino acid chloride such as 9b or 9c. Among three Bts cleavage methods compared (H3PO2/THF; NaBH4/EtOH; PhSH/K2CO3), the third gave somewhat higher overall yields. N-Acylation of 5a with the Bts-protected N-methylamino acid chloride 10b followed by deprotection was also highly efficient and could be used as an alternative route to 11. Each of the deprotected amines was isolated without chromatography using simple extraction methods to remove neutral byproducts. The tetrapeptide 1 was obtained in analytically pure form as the monohydrate.

  3. Skeletal muscle microRNA and messenger RNA profiling in cofilin-2 deficient mice reveals cell cycle dysregulation hindering muscle regeneration.

    Directory of Open Access Journals (Sweden)

    Sarah U Morton

    Full Text Available Congenital myopathies are rare skeletal muscle diseases presenting in early age with hypotonia and weakness often linked to a genetic defect. Mutations in the gene for cofilin-2 (CFL2 have been identified in several families as a cause of congenital myopathy with nemaline bodies and cores. Here we explore the global messenger and microRNA expression patterns in quadriceps muscle samples from cofillin-2-null mice and compare them with sibling-matched wild-type mice to determine the molecular pathways and mechanisms involved. Cell cycle processes are markedly dysregulated, with altered expression of genes involved in mitotic spindle formation, and evidence of loss of cell cycle checkpoint regulation. Importantly, alterations in cell cycle, apoptosis and proliferation pathways are present in both mRNA and miRNA expression patterns. Specifically, p21 transcript levels were increased, and the expression of p21 targets, such as cyclin D and cyclin E, was decreased. We therefore hypothesize that deficiency of cofilin-2 is associated with interruption of the cell cycle at several checkpoints, hindering muscle regeneration. Identification of these pathways is an important step towards developing appropriate therapies against various congenital myopathies.

  4. Distinctive role of income in the all-cause mortality among working age migrants and the settled population in Finland: A follow-up study from 2001 to 2014.

    Science.gov (United States)

    Patel, Kishan; Kouvonen, Anne; Koskinen, Aki; Kokkinen, Lauri; Donnelly, Michael; O'Reilly, Dermot; Vaananen, Ari

    2018-03-01

    Although income level may play a significant part in mortality among migrants, previous research has not focused on the relationship between income, migration and mortality risk. The aim of this register study was to compare all-cause mortality by income level between different migrant groups and the majority settled population of Finland. A random sample was drawn of 1,058,391 working age people (age range 18-64 years; 50.4% men) living in Finland in 2000 and linked to mortality data from 2001 to 2014. The data were obtained from Statistics Finland. Cox proportional hazards models were used to investigate the association between region of origin and all-cause mortality in low- and high-income groups. The risk for all-cause mortality was significantly lower among migrants than among the settled majority population (hazards ratio (HR) 0.57; 95% confidence interval (CI) 0.53-0.62). After adjustment for age, sex, marital status, employment status and personal income, the risk of mortality was significantly reduced for low-income migrants compared with the settled majority population with a low income level (HR 0.46; 95% CI 0.42-0.50) and for high-income migrants compared with the high-income settled majority (HR 0.81; 95% CI 0.69-0.95). Results comparing individual high-income migrant groups and the settled population were not significant. Low-income migrants from Africa, the Middle East and Asia had the lowest mortality risk of any migrant group studied (HR 0.32; 95% CI 0.27-0.39). Particularly low-income migrants seem to display a survival advantage compared with the corresponding income group in the settled majority population. Downward social mobility, differences in health-related lifestyles and the healthy migrant effect may explain this phenomenon.

  5. Helmint eggs elimination performance during lammelar settling and sand filters in Beniel WWTP (Murcia, Spain); Rendimiento en la eliminacion de huevos de helminto en la decantacion lamelar y filtracion por arena en la EDAR de Beniel (Murcia)

    Energy Technology Data Exchange (ETDEWEB)

    Simon Andreu, P. J.; Cardin Mifsut, C.; Pacheco Ballarin, S.; Martinez Muro, M. A.; Vicente Gonzalez, J. A.; Llosar Llacer, C.

    2010-07-01

    With this study, it was observed Ascaris suum eggs elimination yield of tertiary treatment in Beniel wastewater treatment plant (WWTP) in Murcia Region (Spain). It was inoculated a sample of Ascaris suum eggs in the treatment in maximum flow conditions and it was calculated the retention yield of the lamellar settling and sand filters. (Author) 3 refs.

  6. Aeration tank settling and real time control as a tool to improve the hydraulic capacity and treatment efficiency during wet weather: Results from 7 years' full-scale operational data

    DEFF Research Database (Denmark)

    Sharma, Anitha Kumari; Guildal, T.; Thomsen, H.A.R.

    2013-01-01

    This paper investigates the aeration tank settling (ATS) operation in combination with real time control (RTC) as a tool for increasing the hydraulic capacity and improving the treatment efficiency of a wastewater treatment plant (WWTP) during wet weather flows. Results from 7 years' full...

  7. Development of settling tube method to measure the particle size distribution for the steam explosion accident in the nuclear power plant

    International Nuclear Information System (INIS)

    Lee, Jae Young; Ahan, Kyung Mo; Ahan, Hyung Guyn; Kim, Man Woong

    2004-01-01

    the free falling particles in the liquid. If we provide a settling tube, the fine debris will settle down in different time scale according to their size

  8. Helpful and hindering factors for remission in dysthymia and panic disorder at 9-year follow-up: A mixed methods study

    Directory of Open Access Journals (Sweden)

    Lützen Kim

    2008-07-01

    Full Text Available Abstract Background A better understanding is needed of factors behind the long-term outcome of dysthymic and panic disorders. Combining patients' perceptions of factors that help and hind remission with objective assessments of outcome may give greater insight into mechanisms for maintaining recovery. Methods Twenty-three dysthymic and 15 panic disorder patients participated in a 9-year follow-up investigation of a naturalistic study with psychotherapy and antidepressants. Degree of remission was determined by reassessments with SCID-I & II interviews, self-reported symptoms and life-charting (aided by case records. Qualitative content analysis of in-depth interviews with all 38 patients was done to examine the phenomenon of enduring remission by exploring: 1 perceived helpful and hindering factors, 2 factors common to and specific for the diagnostic groups, 3 convergence between patients' subjective views on remission with objective diagnostic assessments. Results About 50% of the patients were in full or partial remission. Subjective and objective views on degree of remission generally converged, and remission was perceived as receiving 'Tools to handle life'. Common helpful factors were self-understanding, enhanced flexibility of thinking, and antidepressant medication, as well as confidence in the therapist and social support. The perceived main obstacle was difficulty in negotiating treatments. Remitted had overcome the obstacles, whereas many non-remitted had problems expressing their needs. Patients with dysthymia and panic disorder described specific helpful relationships with the therapist: 'As a parent' versus 'As a coach', and specific central areas for change: self-acceptance and resolution of relational problems versus awareness and handling of feelings. Conclusion A general model for recovery from dysthymic and panic disorders is proposed, involving: 1 understanding self and illness mechanisms, 2 enhanced flexibility of thinking

  9. Helpful and hindering factors for remission in dysthymia and panic disorder at 9-year follow-up: a mixed methods study.

    Science.gov (United States)

    Svanborg, Cecilia; Bäärnhielm, Sofie; Aberg Wistedt, Anna; Lützen, Kim

    2008-07-01

    A better understanding is needed of factors behind the long-term outcome of dysthymic and panic disorders. Combining patients' perceptions of factors that help and hind remission with objective assessments of outcome may give greater insight into mechanisms for maintaining recovery. Twenty-three dysthymic and 15 panic disorder patients participated in a 9-year follow-up investigation of a naturalistic study with psychotherapy and antidepressants. Degree of remission was determined by reassessments with SCID-I & II interviews, self-reported symptoms and life-charting (aided by case records). Qualitative content analysis of in-depth interviews with all 38 patients was done to examine the phenomenon of enduring remission by exploring: 1) perceived helpful and hindering factors, 2) factors common to and specific for the diagnostic groups, 3) convergence between patients' subjective views on remission with objective diagnostic assessments. About 50% of the patients were in full or partial remission. Subjective and objective views on degree of remission generally converged, and remission was perceived as receiving 'Tools to handle life'. Common helpful factors were self-understanding, enhanced flexibility of thinking, and antidepressant medication, as well as confidence in the therapist and social support. The perceived main obstacle was difficulty in negotiating treatments. Remitted had overcome the obstacles, whereas many non-remitted had problems expressing their needs. Patients with dysthymia and panic disorder described specific helpful relationships with the therapist: 'As a parent' versus 'As a coach', and specific central areas for change: self-acceptance and resolution of relational problems versus awareness and handling of feelings. A general model for recovery from dysthymic and panic disorders is proposed, involving: 1) understanding self and illness mechanisms, 2) enhanced flexibility of thinking, and 3) change from avoidance coping to approach coping; and

  10. Extraction of UO22+ by two highly sterically hindered (X1) (X2) PO(OH) extractants from an aqueous chloride phase

    International Nuclear Information System (INIS)

    Mason, G.W.; Lewey, S.M.; Gilles, D.M.; Peppard, D.F.

    1978-01-01

    The comparative extraction behaviour of tracer-level UO 2 2+ into benzene solutions of two highly sterically hindered extractants, di(2,6-di-iso-propylphenyl) phosphoric acid, HD(2,6-i-PPHI)P and di-tertiary-butyl phosphinic acid, H[Dt-BP], vs an aqueous 1.0 F (NaCl + HCl) phase was studied. The extraction of UO 2 2+ in both systems is directly second-power dependent upon extractant concentration and inversely second-power dependent upon hydrogen ion concentration, the stoichiometry of extraction being UOsub(2A) 2+ + 2(HY)sub(2O) = UO 2 (HY 2 )sub(2O) + 2Hsub(A) + . The expression for the distribution ratio, K is K = Ksub(s)F 2 /[H + ] 2 the general expression for the extraction of any metallic species being K - Ksub(s)Fsup(a)/[H + ]sup(b) where Ksub(s) is a constant characteristic of the system, F the concentration in formality units of extractant in the organic phase, [H + ] the concentration of hydrogen ion in the aqueous phase, and a and b the respective extractant and hydrogen-ion dependencies. Both extractants have a high degree of steric hindrance. The HD(2,6-i-PPHI)P is the more highly acidic, the pKsub(A) value, in 75% ethanol, being 3.2. The pKsub(A), previously reported, for H[Dt-BP] is 6.26. The Ksub(s) for UO 2 2+ in the system HY in benzene diluent vs an aqueous 1.0 F (NaCl + HCl) phase is 2 x 10 4 for H[Dt-BP] and 3 x 10 -1 for HD(2,6-i-PPHI)P; the ratio of the Ksub(s) values nearly 7 x 10 3 , favours the less acidic extractant. For comparative purposes, the Ksub(s) values for UO 2 2+ and for Am 3+ and Eu 3+ in other (X 1 )(X 2 )PO(OH), in benzene diluent, vs 1.0 F (NaCl + HCl) systems are presented. The variations are discussed in terms of the pKsub(A) of the extractant and the steric hindrance within the extractant. (author)

  11. The use of geotextile tube containers for dewatering the Restigouche open pit zinc mine and settling pond basin in New Brunswick, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Douheret [Terratube, Saint-Romuald, PQ (Canada)

    2010-07-01

    This PowerPoint presentation discussed the use of geotextile tube containers for the dewatering of an open pit zinc mine and settling pond in New Brunswick (NB). The zinc and lead mine closed in 1996 and will be re-opened in 2007. Remediation of the site has been challenged by severe discharge criteria for treated water, as well as by the different types of wastewater produced at the site, which is located in a mountainous area with no impermeable soil. The remediation projects include an open pit cleaning procedure where water is removed and the mine is then desludged. A wastewater treatment plant will then be installed. More than 32,000 m{sup 3} of sludge has accumulated at the bottom of the pit. The zinc content of the sludge was estimated at 2.5 ppm. The water management phase of the project will include batch treatments and the addition of 140 metric tonnes of lime to raise the pH and to precipitate metal ions. The sludge management program included the use of mechanical dewatering, the construction of a storage area, and the use of geocontainers for dewatering and temporary containment. Seventeen geotextile containers were used to reduce the zinc content of the water to less than the 250 ppb authorized by environmental agencies. The containers were changed once every 2 months. tabs., figs.

  12. Oral bioaccessibility of semi-volatile organic compounds (SVOCs) in settled dust: A review of measurement methods, data and influencing factors.

    Science.gov (United States)

    Raffy, Gaëlle; Mercier, Fabien; Glorennec, Philippe; Mandin, Corinne; Le Bot, Barbara

    2018-06-15

    Many semi-volatile organic compounds (SVOCs), suspected of reprotoxic, neurotoxic or carcinogenic effects, were measured in indoor settled dust. Dust ingestion is a non-negligible pathway of exposure to some of these SVOCs, and an accurate knowledge of the real exposure is necessary for a better evaluation of health risks. To this end, the bioaccessibility of SVOCs in dust needs to be considered. In the present work, bioaccessibility measurement methods, SVOCs' oral bioaccessibility data and influencing factors were reviewed. SVOC bioaccessibilities (%) ranged from 11 to 94, 8 to 100, 3 to 92, 1 to 81, 6 to 52, and 2 to 17, for brominated flame retardants, organophosphorus flame retardants, polychlorobiphenyls, phthalates, pesticides and polycyclic aromatic hydrocarbons, respectively. Measurements method produced varying results depending on the inclusion of food and/or sink in the model. Characteristics of dust, e.g., organic matter content and particle size, also influenced bioaccessibility data. Last, results were influenced by SVOC properties, such as octanol/water partition coefficient and migration pathway into dust. Factors related to dust and SVOCs could be used in prediction models. To this end, more bioaccessibility studies covering more substances should be performed, using methods that are harmonized and validated by comparison to in-vivo studies. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Steam condensation on finned tubes, in the presence of non-condensable gases and aerosols: Influence of impaction, diffusiophoresis and settling on aerosol deposition

    International Nuclear Information System (INIS)

    Munoz-Cobo, J.L.; Pena, J.; Herranz, L.E.; Perez-Navarro, A.

    2005-01-01

    This paper presents a mechanistic model to predict the steam condensation on containment finned tube heat exchangers in the presence of non-condensable gases (NC) and aerosols. The total thermal resistance from the bulk gas to the coolant is formulated as a parallel combination of the convective and condensation gas resistances coupled in series to those of condensate layer, the aerosol fouling layer, the wall, and the coolant. The condensate layer thermal resistance is calculated by means of an Adamek-based condensation model. The aerosol fouling layer is computed based on diffusiophoresis, settling and impaction mechanisms. The gas mixture (steam plus NC) thermal resistance is formulated based on a diffusion layer modeling. Finally, this paper presents a Montecarlo method implemented in the FORTRAN code TAEROSOL that is able to compute the amount of aerosol mass that is deposited by impaction on the top of the finned tubes. The model results are compared with the available experimental data of the CONGA European project

  14. Heavy Metal Pollution in Settled Dust Associated with Different Urban Functional Areas in a Heavily Air-Polluted City in North China

    Science.gov (United States)

    Wan, Dejun; Han, Zhangxiong; Yang, Jinsong; Yang, Guanglin; Liu, Xingqi

    2016-01-01

    Understanding variations of heavy metals in atmospheric particles between different functional areas is significant for pollution control and urban planning in cities. To reveal pollution and spatial distribution of heavy metals in atmospheric particles from different urban functional areas in Shijiazhuang in North China, 43 settled dust samples were collected over the main urban area and heavy metal concentrations were determined in their pollution indexes (IPIs) of the ten heavy metals are 2.7–13.6 (5.7 ± 2.2), suggesting high or very high pollution levels of most dust. Relatively lower IPIs occur mainly in the administration-education area, the commercial area, and other unclassified sites; while peaks occur mainly in the North Railway Station, the northeastern industrial area, and some sites near heavily trafficked areas, implying the significant influence of intensive industrial (including coal combustion) and traffic activities on atmospheric heavy metal accumulation. These results suggest a clear need of mitigating atmospheric heavy metal pollution via controlling emissions of toxic metals (especially Cd and Pb) from industrial and traffic sources in the city. PMID:27834903

  15. Effects of oxidation reduction potential in the bypass micro-aerobic sludge zone on sludge reduction for a modified oxic-settling-anaerobic process.

    Science.gov (United States)

    Li, Kexun; Wang, Yi; Zhang, Zhongpin; Liu, Dongfang

    2014-01-01

    Batch experiments were conducted to determine the effect of oxidation reduction potential (ORP) on sludge reduction in a bypass micro-aerobic sludge reduction system. The system was composed of a modified oxic-settling-anaerobic process with a sludge holding tank in the sludge recycle loop. The ORPs in the micro-aerobic tanks were set at approximately +350, -90, -150, -200 and -250 mV, by varying the length of aeration time for the tanks. The results show that lower ORP result in greater sludge volume reduction, and the sludge production was reduced by 60% at the lowest ORP. In addition, low ORP caused extracellular polymer substances dissociation and slightly reduced sludge activity. Comparing the sludge backflow characteristics of the micro-aerobic tank's ORP controlled at -250 mV with that of +350 mV, the average soluble chemical oxygen (SCOD), TN and TP increased by 7, 0.4 and 2 times, median particle diameter decreased by 8.5 μm and the specific oxygen uptake rate (SOUR) decreased by 0.0043 milligram O2 per gram suspended solids per minute. For the effluent, SCOD and TN and TP fluctuated around 30, 8.7 and 0.66 mg/L, respectively. Therefore, the effective assignment of ORP in the micro-aerobic tank can remarkably reduce sludge volume and does not affect final effluent quality.

  16. Critical modeling parameters identified for 3D CFD modeling of rectangular final settling tanks for New York City wastewater treatment plants.

    Science.gov (United States)

    Ramalingam, K; Xanthos, S; Gong, M; Fillos, J; Beckmann, K; Deur, A; McCorquodale, J A

    2012-01-01

    New York City Environmental Protection is in the process of incorporating biological nitrogen removal (BNR) in its wastewater treatment plants (WWTPs) which entails operating the aeration tanks with higher levels of mixed liquor suspended solids (MLSS) than a conventional activated sludge process. The objective of this paper is to discuss two of the important parameters introduced in the 3D CFD model that has been developed by the City College of New York (CCNY) group: (a) the development of the 'discrete particle' measurement technique to carry out the fractionation of the solids in the final settling tank (FST) which has critical implications in the prediction of the effluent quality; and (b) the modification of the floc aggregation (K(A)) and floc break-up (K(B)) coefficients that are found in Parker's flocculation equation (Parker et al. 1970, 1971) used in the CFD model. The dependence of these parameters on the predictions of the CFD model will be illustrated with simulation results on one of the FSTs at the 26th Ward WWTP in Brooklyn, NY.

  17. A capacitive DAC with custom 3-D 1-fF MOM unit capacitors optimized for fast-settling routing in high speed SAR ADCs

    International Nuclear Information System (INIS)

    Chen Chixiao; Xiang Jixuan; Chen Huabin; Xu Jun; Ye Fan; Li Ning; Ren Junyan

    2015-01-01

    Asynchronous successive approximation register (SAR) analog-to-digital converters (ADC) feature high energy efficiency but medium performance. From the point of view of speed, the key bottleneck is the unit capacitor size. In this paper, a small size three-dimensional (3-D) metal—oxide—metal (MOM) capacitor is proposed. The unit capacitor has a capacitance of 1-fF. It shapes as an umbrella, which is designed for fast settling consideration. A comparison among the proposed capacitor with other 3-D MOM capacitors is also given in the paper. To demonstrate the effectiveness of the MOM capacitor, a 6-b capacitive DAC is implemented in TSMC 1P9M 65 nm LP CMOS technology. The DAC consumes a power dissipation of 0.16 mW at the rate of 100 MS/s, excluding a source-follower based output buffer. Static measurement result shows that INL is less than ±1 LSB and DNL is less than ±0.5 LSB. In addition, a 100 MS/s 9-bit SAR ADC with the proposed 3-D capacitor is simulated. (paper)

  18. Heavy Metal Pollution in Settled Dust Associated with Different Urban Functional Areas in a Heavily Air-Polluted City in North China.

    Science.gov (United States)

    Wan, Dejun; Han, Zhangxiong; Yang, Jinsong; Yang, Guanglin; Liu, Xingqi

    2016-11-10

    Understanding variations of heavy metals in atmospheric particles between different functional areas is significant for pollution control and urban planning in cities. To reveal pollution and spatial distribution of heavy metals in atmospheric particles from different urban functional areas in Shijiazhuang in North China, 43 settled dust samples were collected over the main urban area and heavy metal concentrations were determined in their pollution indexes (IPIs) of the ten heavy metals are 2.7-13.6 (5.7 ± 2.2), suggesting high or very high pollution levels of most dust. Relatively lower IPIs occur mainly in the administration-education area, the commercial area, and other unclassified sites; while peaks occur mainly in the North Railway Station, the northeastern industrial area, and some sites near heavily trafficked areas, implying the significant influence of intensive industrial (including coal combustion) and traffic activities on atmospheric heavy metal accumulation. These results suggest a clear need of mitigating atmospheric heavy metal pollution via controlling emissions of toxic metals (especially Cd and Pb) from industrial and traffic sources in the city.

  19. Numerical Modelling of Flow and Settling in Secondary Settling Tanks

    OpenAIRE

    Dahl, Claus Poulsen

    1995-01-01

    Denne afhandling omhandler udviklingen af en numerisk model til simulering af efterklaringstanke. lndledningsvis er beskrevet status for udviklingen inden for numeriske modeller for efterklaring og den nuværende designpraksis. Resultatet af denne statusbeskrivelse er et behov for videre udvikling for at indføre numeriske modeller i design af efterklaringstanke og hermed forbedre efterklaringstanke i fremtiden. This thesis discusses the development of a numerical model for the simulation of...

  20. Leadership That Settled the Frontier

    Science.gov (United States)

    Boyd, Barry L.

    2014-01-01

    This idea brief explores the leadership lessons displayed by the characters of Louis L'Amour's western novels. Western fiction can be a powerful tool to engage students and demonstrate many leadership theories and models. This brief examines how L'Amour's characters can be used to illustrate Kouzes and Posner's Five Practices of Exemplary Leaders.…

  1. Settling in in the Netherlands

    NARCIS (Netherlands)

    Mérove Gijsberts; Marcel Lubbers

    2015-01-01

    Original title: Langer in Nederland What happens to the position of Poles and Bulgarians in the Netherlands in the first years following migration? This publication is based on information from a panel survey which tracks Polish and Bulgarian migrants in the first years after their entry in

  2. What factors help or hinder the achievement of low SES students? An international comparison using TIMSS 2011 8th grade science data

    Science.gov (United States)

    Bruner, Justin L.

    Focusing on science from a cross-country perspective, this study explores the relationship between 8th grade science achievement and student, teacher, and school characteristics. More specifically, this study will pay special attention to low socio-economic status (SES) students and seek to understand why some disadvantaged students are able to have higher than expected achievement in science given their SES while other disadvantaged students are not able to achieve beyond what would be expected given their background. This study will explore the multi-level relationship between the characteristics of students, their teachers, their schools, and student achievement in science. While looking at students in classrooms and in schools, this work will create as precise as possible a measure of student SES by drawing on recommendations of an expert panel commissioned by the National Association of Educational Progress (NAEP) study. The study uses the most recent cycle (2011) of the Trends in International Math and Science Study (TIMSS), to strategically select a six-country sample from the 45 participating countries. This six-country sample was selected by using the country level achievement and the standard deviation of that achievement. This will create a sample that has a range of equality in achievement and strength in achievement. This allows for making comparisons both across and within countries to better understand variations in the factors of student performance, especially for disadvantaged students. This paper builds on the existing research around socio-economic status (SES) and achievement by exploring in more detail the conditions in schools and classrooms around the world that might magnify or reduce the effect of SES on student achievement. The analysis looks at these questions: "What conditions help low SES students achieve higher than what would be expected given their SES?" and "What conditions hinder low SES students to achieve at or below what would

  3. Signal peptide prediction suggests Mycobacterium tuberculosis curli pilin subunit secretion via the Sec pathway may hinder MTP overexpression in Escherichia coli

    Energy Technology Data Exchange (ETDEWEB)

    Naidoo, N.; Pillay, B.; Bubb, M.; Kumar, A.; Chiliza, T.; Pillay, M.

    2017-07-01

    Introduction Mycobacterium tuberculosis curli pili (MTP) are novel, potential TB diagnostic biomarkers as they are important virulence attributes, unique to the M. tuberculosis complex (MTBC). The production of high quality recombinant transmembrane and secretory proteins that can serve as biomarkers may be challenging due to their secretion attributes. For example, the signal peptide of MTP governed by the classical secretion pathway may hinder the purification of the protein in E. coli systems. In this study, the secretion characteristics of MTP were determined and the cloning, expression and purification of MTP was attempted in E.coli. Materials and methods A fragment of MTP unique to MTBC was cloned into pet101 and pGEX-6P-1 vectors. The clones were confirmed by nucleotide sequencing and expression of the protein was attempted at IPTG concentrations ranging from 0.1mM to 1mM and at temperatures between 25 °C to 37 °C. The pGEX-6P-1/mtp clone expressed protein was purified, yielding a MTP-GST fusion protein and a free GST band that were analysed by LC/MS mass spectrometry. Inclusion body preparation attempted from the pet101/mtp clone yielded two bands at 10 kDa and below 10 kDa, both of which were analysed by LC/MS mass spectrometry. Transcription activity of both the clones was interrogated by real time PCR on the cDNA derived from the induced clones at various time points after induction with IPTG. The signal peptide and protein secretion characteristics of the MTP protein were determined by bioinformatics analysis of the amino acid sequence using publically available software. Results The truncated MTP fragments were successfully cloned in both the vectors as confirmed by nucleotide sequencing. Expression of the pGEX-6P-1/mtp clone using 0.5 mM IPTG at 27 °C demonstrated the presence of the expected fragment at approximately 35 kDa. This was confirmed by Western Blotting using anti-GST antibodies. However, purification of MTP in adequate quantities as a

  4. Signal peptide prediction suggests Mycobacterium tuberculosis curli pilin subunit secretion via the Sec pathway may hinder MTP overexpression in Escherichia coli

    International Nuclear Information System (INIS)

    Naidoo, N.; Pillay, B.; Bubb, M.; Kumar, A.; Chiliza, T.; Pillay, M.

    2017-01-01

    Introduction Mycobacterium tuberculosis curli pili (MTP) are novel, potential TB diagnostic biomarkers as they are important virulence attributes, unique to the M. tuberculosis complex (MTBC). The production of high quality recombinant transmembrane and secretory proteins that can serve as biomarkers may be challenging due to their secretion attributes. For example, the signal peptide of MTP governed by the classical secretion pathway may hinder the purification of the protein in E. coli systems. In this study, the secretion characteristics of MTP were determined and the cloning, expression and purification of MTP was attempted in E.coli. Materials and methods A fragment of MTP unique to MTBC was cloned into pet101 and pGEX-6P-1 vectors. The clones were confirmed by nucleotide sequencing and expression of the protein was attempted at IPTG concentrations ranging from 0.1mM to 1mM and at temperatures between 25 °C to 37 °C. The pGEX-6P-1/mtp clone expressed protein was purified, yielding a MTP-GST fusion protein and a free GST band that were analysed by LC/MS mass spectrometry. Inclusion body preparation attempted from the pet101/mtp clone yielded two bands at 10 kDa and below 10 kDa, both of which were analysed by LC/MS mass spectrometry. Transcription activity of both the clones was interrogated by real time PCR on the cDNA derived from the induced clones at various time points after induction with IPTG. The signal peptide and protein secretion characteristics of the MTP protein were determined by bioinformatics analysis of the amino acid sequence using publically available software. Results The truncated MTP fragments were successfully cloned in both the vectors as confirmed by nucleotide sequencing. Expression of the pGEX-6P-1/mtp clone using 0.5 mM IPTG at 27 °C demonstrated the presence of the expected fragment at approximately 35 kDa. This was confirmed by Western Blotting using anti-GST antibodies. However, purification of MTP in adequate quantities as a

  5. Set points, settling points and some alternative models: theoretical options to understand how genes and environments combine to regulate body adiposity

    Directory of Open Access Journals (Sweden)

    John R. Speakman

    2011-11-01

    Full Text Available The close correspondence between energy intake and expenditure over prolonged time periods, coupled with an apparent protection of the level of body adiposity in the face of perturbations of energy balance, has led to the idea that body fatness is regulated via mechanisms that control intake and energy expenditure. Two models have dominated the discussion of how this regulation might take place. The set point model is rooted in physiology, genetics and molecular biology, and suggests that there is an active feedback mechanism linking adipose tissue (stored energy to intake and expenditure via a set point, presumably encoded in the brain. This model is consistent with many of the biological aspects of energy balance, but struggles to explain the many significant environmental and social influences on obesity, food intake and physical activity. More importantly, the set point model does not effectively explain the ‘obesity epidemic’ – the large increase in body weight and adiposity of a large proportion of individuals in many countries since the 1980s. An alternative model, called the settling point model, is based on the idea that there is passive feedback between the size of the body stores and aspects of expenditure. This model accommodates many of the social and environmental characteristics of energy balance, but struggles to explain some of the biological and genetic aspects. The shortcomings of these two models reflect their failure to address the gene-by-environment interactions that dominate the regulation of body weight. We discuss two additional models – the general intake model and the dual intervention point model – that address this issue and might offer better ways to understand how body fatness is controlled.

  6. Quantification and economic valuation of the capture of CO2 for plantations of the Eucalyptus, genus, settled down by the PRECA in the carboniferous basins of Cesar, Cauca Valley, Cauca and Cundiboyacense Highland

    International Nuclear Information System (INIS)

    Diaz F, Sandra Ximena; Molano M, Miguel Angel

    2001-01-01

    In this study, the first measure is to quantify the tons of CO 2 captured by the increment in the biomass of forest plantations of the Eucalyptus genus, settled down by the PRECA of Ecocarbon in the carboniferous basins of the Cesar, Cauca Valley, Cauca and Cundiboyacense highland and in second measure to determine the economic value that the sale of this environmental service can represent for a developing country as Colombia. The results obtained for each one of the plantations settled down in each carboniferous basin are determined and statistical models that will allow to calculate the capture of CO 2 carried out by plantations of three different species of Eucalyptus (E. Camaldulensis, E. grandis and E. globulus)

  7. The formation of early settled villages and the emergence of leadership: A test of three theoretical models in the Rio Ilave, Lake Titicaca Basin, southern Peru

    Science.gov (United States)

    Craig, Nathan Mcdonald

    Despite obvious necessities for understanding later developments in the region, Preceramic cultures in the Titicaca Basin are poorly understood due to lacking empirical data. This dissertation focuses on examination of two processes occurring in the Rio Ilave drainage during the Late 5000--3100 B.C.E. (6000--4400 B.P.) and Terminal 3100--1500 B.C.E. Archaic (4400--3200 B.P.): the formation of settled villages and the emergence of leadership. These processes are tested against theoretical predictions derived from: population resource imbalance, human behavioral ecology, and agency theories. Resource imbalance theory predicts appearance of density dependent adaptive problems prior to major cultural transformations. Human behavioral ecology predicts increased dietary diversity and incorporation of greater processing costs occuring coincidentally with reduced residential mobility. Symbolic mate value advertising is a predicted leadership strategy. Agency theory predicts internal sources of social tension, potentially independent of external forces, as primary causes of cultural change. Feast hosting and the formation political economy are expected to be central to both social processes investigated from this perspective. Local paleoclimatic proxies suggest aridity from ca 4000--2000 B.C.E. Reanalysis of pedestrian survey data indicate population growth during the Late Archaic. Excavation and ground penetrating radar survey at Pirco and Jiskairumoko demonstrate reduced residential mobility and increased evidence for social differentiation appearing during the Late Archaic's (before 3000 B.C.E.) end. New cultural patterns include: pithouses, more groundstone, internal storage, costly non-local artifacts, domesticated plants and animals, costly grave goods, and use of ochre in symbolic contexts. No clear cut evidence for inter-community promotional feasting was identified but some finds suggest intra-community alliance feasts. By the end of the Terminal Archaic ca. 1500 B

  8. Assessing the applicability of the 1D flux theory to full-scale secondary settling tank design with a 2D hydrodynamic model.

    Science.gov (United States)

    Ekama, G A; Marais, P

    2004-02-01

    The applicability of the one-dimensional idealized flux theory (1DFT) for the design of secondary settling tanks (SSTs) is evaluated by comparing its predicted maximum surface overflow (SOR) and solids loading (SLR) rates with that calculated with the two-dimensional computational fluid dynamics model SettlerCAD using as a basis 35 full-scale SST stress tests conducted on different SSTs with diameters from 30 to 45m and 2.25-4.1m side water depth (SWD), with and without Stamford baffles. From the simulations, a relatively consistent pattern appeared, i.e. that the 1DFT can be used for design but its predicted maximum SLR needs to be reduced by an appropriate flux rating, the magnitude of which depends mainly on SST depth and hydraulic loading rate (HLR). Simulations of the Watts et al. (Water Res. 30(9)(1996)2112) SST, with doubled SWDs and the Darvill new (4.1m) and old (2.5m) SSTs with interchanged depths, were run to confirm the sensitivity of the flux rating to depth and HLR. Simulations with and without a Stamford baffle were also performed. While the design of the internal features of the SST, such as baffling, has a marked influence on the effluent SS concentration while the SST is underloaded, these features appeared to have only a small influence on the flux rating, i.e. capacity, of the SST. Until more information is obtained, it would appear from the simulations that the flux rating of 0.80 of the 1DFT maximum SLR recommended by Ekama and Marais (Water Pollut. Control 85(1)(1986)101) remains a reasonable value to apply in the design of full-scale SSTs-for deep SSTs (4m SWD) the flux rating could be increased to 0.85 and for shallow SSTs (2.5m SWD) decreased to 0.75. It is recommended that (i) while the apparent interrelationship between SST flux rating and depth suggests some optimization of the volume of the SST, this be avoided and (ii) the depth of the SST be designed independently of the surface area as is usually the practice and once selected, the

  9. Yielding the yield-stress analysis: a study focused on the effects of elasticity on the settling of a single spherical particle in simple yield-stress fluids.

    Science.gov (United States)

    Fraggedakis, D; Dimakopoulos, Y; Tsamopoulos, J

    2016-06-28

    The sedimentation of a single particle in materials that exhibit simultaneously elastic, viscous and plastic behavior is examined in an effort to explain phenomena that contradict the nature of purely yield-stress materials. Such phenomena include the loss of the fore-and-aft symmetry with respect to an isolated settling particle under creeping flow conditions and the appearance of the "negative wake" behind it. Despite the fact that similar observations have been reported in studies involving viscoelastic fluids, researchers conjectured that thixotropy is responsible for these phenomena, as the aging of yield-stress materials is another common feature. By means of transient calculations, we study the effect of elasticity on both the fluidized and the solid phase. The latter is considered to behave as an ideal Hookean solid. The material properties of the model are determined under the isotropic kinematic hardening framework via Large Amplitude Oscillatory Shear (LAOS) measurements. In this way, we are able to predict accurately the unusual phenomena observed in experiments with simple yield-stress materials, irrespective of the appearance of slip on the particle surface. Viscoelasticity favors the formation of intense shear and extensional stresses downstream of the particle, significantly changing the entrapment mechanism in comparison to that observed in viscoplastic fluids. Therefore, the critical conditions under which the entrapment of the particle occurs deviate from the well-known criterion established theoretically by Beris et al. (1985) and verified experimentally by Tabuteau et al. (2007) for similar materials under conditions that elastic effects are negligible. Our predictions are in quantitative agreement with published experimental results by Holenberg et al. (2012) on the loss of the fore-aft symmetry and the formation of the negative wake in Carbopol with well-characterized rheology. Additionally, we propose simple expressions for the Stokes drag

  10. Two Palladium-Catalyzed Domino Reactions from One Set of Substrates/Reagents: Efficient Synthesis of Substituted Indenes and cis-Stilbenoid Hydrocarbons from the Same Internal Alkynes and Hindered Grignard Reagents

    Science.gov (United States)

    Dong, Cheng-Guo; Yeung, Pik; Hu, Qiao-Sheng

    2008-01-01

    Two types of domino reactions from the same internal alkynes and hindered Grignard reagents based on carbopalladation, Pd-catalyzed cross-coupling reaction and C-H activation strategy are described. The realization of these domino reactions relied on the control of the use of the ligand and the reaction temperature. Our study provides an efficient access to useful polysubstituted indenes and cis-substituted stilbenes, and may offer new means to the development of tandem/domino reactions in a more efficient way. PMID:17217305

  11. Highway-runoff quality, and treatment efficiencies of a hydrodynamic-settling device and a stormwater-filtration device in Milwaukee, Wisconsin

    Science.gov (United States)

    Horwatich, Judy A.; Bannerman, Roger T.; Pearson, Robert

    2011-01-01

    The treatment efficiencies of two prefabricated stormwater-treatment devices were tested at a freeway site in a high-density urban part of Milwaukee, Wisconsin. One treatment device is categorized as a hydrodynamic-settling device (HSD), which removes pollutants by sedimentation and flotation. The other treatment device is categorized as a stormwater-filtration device (SFD), which removes pollutants by filtration and sedimentation. During runoff events, flow measurements were recorded and water-quality samples were collected at the inlet and outlet of each device. Efficiency-ratio and summation-of-load (SOL) calculations were used to estimate the treatment efficiency of each device. Event-mean concentrations and loads that were decreased by passing through the HSD include total suspended solids (TSS), suspended sediment (SS), total phosphorus (TP), total copper (TCu), and total zinc (TZn). The efficiency ratios for these constituents were 42, 57, 17, 33, and 23 percent, respectively. The SOL removal rates for these constituents were 25, 49, 10, 27, and 16 percent, respectively. Event-mean concentrations and loads that increased by passing through the HSD include chloride (Cl), total dissolved solids (TDS), and dissolved zinc (DZn). The efficiency ratios for these constituents were -347, -177, and 20 percent, respectively. Four constituents—dissolved phosphorus (DP), chemical oxygen demand (COD), total polycyclic aromatic hydrocarbon (PAH), and dissolved copper (DCu)—are not included in the list of computed efficiency ratio and SOL because the variability between sampled inlet and outlet pairs were not significantly different. Event-mean concentrations and loads that decreased by passing through the SFD include TSS, SS, TP, DCu, TCu, DZn, TZn, and COD. The efficiency ratios for these constituents were 59, 90, 40, 21, 66, 23, 66, and 18, respectively. The SOLs for these constituents were 50, 89, 37, 19, 60, 20, 65, and 21, respectively. Two constituents—DP and

  12. Settling and growth of D. polymorpha in the raw water circuits of the Cattenom nuclear power plant (Moselle, France); Fixation et croissance de D. Polymorpha dans les circuits d`eau brute de la centrale nucleaire de Cattenom

    Energy Technology Data Exchange (ETDEWEB)

    Moreteau, J C; Khalanski, M

    1994-05-01

    A``biological profile`` of the zebra mussels which are infesting certain circuits of the Cattenom nuclear power plant has been provided by data collected during a three-year measurement programme (1991-1993). The larval settlement periods and the growth of settled mussels were monitored. A simple mathematical model, which calculates the shell growth on the long term, was calibrated with the field data. It is based on three functions representing the effect of the initial size, water temperature and fool availability (plankton chlorophyll a). (authors). 13 refs., 7 figs., 4 tabs.

  13. Packaging conditions hindering fungal growth on cheese

    DEFF Research Database (Denmark)

    Nielsen, Per Væggemose; Haasum, Iben

    1997-01-01

    Fungal contamination is one of the most important quality deteriorating factors on cheese. During the last 5 years we have studied in detail the underlying factors controlling these unwanted processes in a collaborative project financed by the Danish Dairy Board and the Ministry of Agriculture...

  14. Technical Challenges Hindering Development of Robust Wireless ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... challenges remain to be resolved, in designing robust wireless networks that can deliver the performance ... demonstrated the first radio transmission from the Isle of ... distances with better quality, less power, and smaller ...

  15. Conformation of hindered piperidines: Spectroscopic evidence for ...

    Indian Academy of Sciences (India)

    Administrator

    presence of an equilibrium mixture of boat forms B1 and B2 for Z isomers of 5–8. For the E isomers of. 5–8, boat form B1 ... C NMR; conformational analysis; boat forms. 1. Introduction. Many piperidine derivatives are found to possess pharmacological activity and form an essential part of the molecular structure of important ...

  16. [What hinders the political participation of women?].

    Science.gov (United States)

    Ramirez, S

    1994-06-01

    Forty years after gaining the right to vote, Colombian women comprise scarcely 8% of persons recently elected to the Colombian Congress. At the municipal and departmental level, women occupy even fewer of the positions. Explanations of women's marginal political participation in terms of stereotypes such as their presumed disinterest or emotionalism reflect androcentric prejudices. Their lack of preparation and social conditioning is also a suspect argument, given that there are no objective forms of measuring preparation for political office, such as examinations or specific requirements. Centers for women's studies have sought explanation in terms of aspects of the social and political organization of society that impede access by women to positions of power. Laws assuring women their political rights have not been sufficient to allow them to participate under equal conditions. The assignment of responsibility for domestic labor exclusively to women is a powerful handicap to their full participation. Moreover, public life has become a costly career in terms of resources, time, and energy. The problem is not that women do not participate in politics, but that they are underrepresented in the centers of power. They comprise half of voters and the majority of members of community and civic associations dealing with problems of everyday life. But the number of women declines as the scale of power increases. Feminists suggest that the problem will not be solved by women assuming the behavior patterns of men. Rather, the governmental and civil elites must overcome norms and practices that perpetuate the subordination of women. Women achieving positions of power should maintain a gender perspective and assist in transforming conditions.

  17. China’s Bureaucracy Hinders Environmental Recovery

    Science.gov (United States)

    Lixin Guan; Ge Sun; Shixiong Cao

    2010-01-01

    Ecosystem restoration efforts have become a booming business in China. Billions of dollars are being spent annually to restore polluted waterways and ecosystems that have been degraded, fragmented, or paved over (Fu et al. 2007; Wang et al. 2007). However, China’s environmental sustainability index remains among the lowest in the world (World Bank 2009; Liu 2010). For...

  18. Undefined cellulase formulations hinder scientific reproducibility.

    Science.gov (United States)

    Himmel, Michael E; Abbas, Charles A; Baker, John O; Bayer, Edward A; Bomble, Yannick J; Brunecky, Roman; Chen, Xiaowen; Felby, Claus; Jeoh, Tina; Kumar, Rajeev; McCleary, Barry V; Pletschke, Brett I; Tucker, Melvin P; Wyman, Charles E; Decker, Stephen R

    2017-01-01

    In the shadow of a burgeoning biomass-to-fuels industry, biological conversion of lignocellulose to fermentable sugars in a cost-effective manner is key to the success of second-generation and advanced biofuel production. For the effective comparison of one cellulase preparation to another, cellulase assays are typically carried out with one or more engineered cellulase formulations or natural exoproteomes of known performance serving as positive controls. When these formulations have unknown composition, as is the case with several widely used commercial products, it becomes impossible to compare or reproduce work done today to work done in the future, where, for example, such preparations may not be available. Therefore, being a critical tenet of science publishing, experimental reproducibility is endangered by the continued use of these undisclosed products. We propose the introduction of standard procedures and materials to produce specific and reproducible cellulase formulations. These formulations are to serve as yardsticks to measure improvements and performance of new cellulase formulations.

  19. Utilization of C-14 settled urease for diagnosing Campylobacter Pylori in the stomach. Utilizacao de ureia marcada com carbono quatorze para diagnostico da presenca do Campylobacter Pylori no estomago

    Energy Technology Data Exchange (ETDEWEB)

    Chausson, Y; Coelho, L G.V. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)

    1990-01-01

    A new method for diagnosing the Campylobacter Pylori in the stomach is described, using C-14 settled urease. Campylobacter Pylori is now being considered the most probable causative agent of antral chronic gastritis, pepitic ulcer and non-ulcerous dyspepsia. The technique is based on ingestion of the tracer, its recovery by exhalation in etanol hyamine solution, followed by counting and dates evaluation. The test was applied to forty two voluntary male and female patients, after their written acquiescence. Their ages varied from 19 to 62 years old. Thirty of the results were positive and twelve negative. All of them were comproved by microbiological (cultura) and hystologycal studies of gastric biopsy gotten by gastroscopy. They were performed at the Gastroentherology Departament of the 'Hospital das Clinicas' that belongs to the Federal University of Minas Gerais. Repetitivity of the breath test was confirmed by repetition of the results in five positive patients and five negative ones. (author).

  20. Fed-batch hydrolysate addition and cell separation by settling in high cell density lignocellulosic ethanol fermentations on AFEX™ corn stover in the Rapid Bioconversion with Integrated recycling Technology process.

    Science.gov (United States)

    Sarks, Cory; Jin, Mingjie; Balan, Venkatesh; Dale, Bruce E

    2017-09-01

    The Rapid Bioconversion with Integrated recycling Technology (RaBIT) process uses enzyme and yeast recycling to improve cellulosic ethanol production economics. The previous versions of the RaBIT process exhibited decreased xylose consumption using cell recycle for a variety of different micro-organisms. Process changes were tested in an attempt to eliminate the xylose consumption decrease. Three different RaBIT process changes were evaluated in this work including (1) shortening the fermentation time, (2) fed-batch hydrolysate addition, and (3) selective cell recycling using a settling method. Shorting the RaBIT fermentation process to 11 h and introducing fed-batch hydrolysate addition eliminated any xylose consumption decrease over ten fermentation cycles; otherwise, decreased xylose consumption was apparent by the third cell recycle event. However, partial removal of yeast cells during recycle was not economical when compared to recycling all yeast cells.

  1. Analytic Morse/long-range potential energy surfaces and "adiabatic-hindered-rotor" treatment for a symmetric top-linear molecule dimer: A case study of CH3F-H2

    Science.gov (United States)

    Zhang, Xiao-Long; Ma, Yong-Tao; Zhai, Yu; Li, Hui

    2018-03-01

    A first effective six-dimensional ab initio potential energy surface (PES) for CH3F-H2 which explicitly includes the intramolecular Q3 stretching normal mode of the CH3F monomer is presented. The electronic structure computations have been carried out at the explicitly correlated coupled cluster level of theory [CCSD(T)-F12a] with an augmented correlation-consistent triple zeta basis set. Five-dimensional analytical intermolecular PESs for ν3(CH3F) = 0 and 1 are then obtained by fitting the vibrationally averaged potentials to the Morse/Long-Range (MLR) potential function form. The MLR function form is applied to the nonlinear molecule-linear molecule case for the first time. These fits to 25 015 points have root-mean-square deviations of 0.74 cm-1 and 0.082 cm-1 for interaction energies less than 0.0 cm-1. Using the adiabatic hindered-rotor approximation, three-dimensional PESs for CH3F-paraH2 are generated from the 5D PESs over all possible orientations of the hydrogen monomer. The infrared and microwave spectra for CH3F-paraH2 dimer are predicted for the first time. These analytic PESs can be used for modeling the dynamical behavior in CH3F-(H2)N clusters, including the possible appearance of microscopic superfluidity.

  2. MODIFICATION OF THE ANALYTIC HIERARCHY PROCESS (AHP METHOD USING FUZZY LOGIC: FUZZY AHP APPROACH AS A SUPPORT TO THE DECISION MAKING PROCESS CONCERNING ENGAGEMENT OF THE GROUP FOR ADDITIONAL HINDERING

    Directory of Open Access Journals (Sweden)

    Darko Božanić

    2015-11-01

    Full Text Available This paper presents the modification of the AHP method, which takes into account the degree of suspense of decision maker, that is it allows that decision maker, with a certain degree of conviction (which is usually less than 100%, defines which linguistic expression corresponds to optimality criteria comparison. To determine the criteria weights and alternative values, fuzzy numbers are used since they are very suitable for the expression of vagueness and uncertainty. In this way, after applying the AHP method, we obtained values of criterion functions for each of the examined alternatives, which corresponds to the value determined by the degree of conviction. This provides that for different values of the degree of conviction can be made generation of different sets of criterion functions values. The set model was tested on choosing directions of action of the Group for additional hindering, as a procedure wich is often accompanied by greater or lesser degree of uncertainty of criteria that are necessary in relevant decision making

  3. Accurate Prognostic Awareness Facilitates, Whereas Better Quality of Life and More Anxiety Symptoms Hinder End-of-Life Care Discussions: A Longitudinal Survey Study in Terminally Ill Cancer Patients' Last Six Months of Life.

    Science.gov (United States)

    Tang, Siew Tzuh; Chen, Chen Hsiu; Wen, Fur-Hsing; Chen, Jen-Shi; Chang, Wen-Cheng; Hsieh, Chia-Hsun; Chou, Wen-Chi; Hou, Ming-Mo

    2018-04-01

    Terminally ill cancer patients do not engage in end-of-life (EOL) care discussions or do so only when death is imminent, despite guidelines for EOL care discussions early in their disease trajectory. Most studies on patient-reported EOL care discussions are cross sectional without exploring the evolution of EOL care discussions as death approaches. Cross-sectional studies cannot determine the direction of association between EOL care discussions and patients' prognostic awareness, psychological well-being, and quality of life (QOL). We examined the evolution and associations of accurate prognostic awareness, functional dependence, physical and psychological symptom distress, and QOL with patient-physician EOL care discussions among 256 terminally ill cancer patients in their last six months by hierarchical generalized linear modeling with logistic regression and by arranging time-varying modifiable variables and EOL care discussions in a distinct time sequence. The prevalence of physician-patient EOL care discussions increased as death approached (9.2%, 11.8%, and 18.3% for 91-180, 31-90, and 1-30 days before death, respectively) but only reached significance in the last month. Accurate prognostic awareness facilitated subsequent physician-patient EOL care discussions, whereas better patient-reported QOL and more anxiety symptoms hindered such discussions. The likelihood of EOL care discussions was not associated with levels of physical symptom distress, functional dependence, or depressive symptoms. Physician-patient EOL care discussions for terminally ill Taiwanese cancer patients remain uncommon even when death approaches. Physicians should facilitate EOL care discussions by cultivating patients' accurate prognostic awareness early in their cancer trajectory when they are physically and psychologically competent, with better QOL, thus promoting informed and value-based EOL care decision making. Copyright © 2017 American Academy of Hospice and Palliative

  4. Prediction of settled water turbidity and optimal coagulant dosage in drinking water treatment plant using a hybrid model of k-means clustering and adaptive neuro-fuzzy inference system

    Science.gov (United States)

    Kim, Chan Moon; Parnichkun, Manukid

    2017-11-01

    Coagulation is an important process in drinking water treatment to attain acceptable treated water quality. However, the determination of coagulant dosage is still a challenging task for operators, because coagulation is nonlinear and complicated process. Feedback control to achieve the desired treated water quality is difficult due to lengthy process time. In this research, a hybrid of k-means clustering and adaptive neuro-fuzzy inference system ( k-means-ANFIS) is proposed for the settled water turbidity prediction and the optimal coagulant dosage determination using full-scale historical data. To build a well-adaptive model to different process states from influent water, raw water quality data are classified into four clusters according to its properties by a k-means clustering technique. The sub-models are developed individually on the basis of each clustered data set. Results reveal that the sub-models constructed by a hybrid k-means-ANFIS perform better than not only a single ANFIS model, but also seasonal models by artificial neural network (ANN). The finally completed model consisting of sub-models shows more accurate and consistent prediction ability than a single model of ANFIS and a single model of ANN based on all five evaluation indices. Therefore, the hybrid model of k-means-ANFIS can be employed as a robust tool for managing both treated water quality and production costs simultaneously.

  5. Anthropology with Activism: Settling Its Value

    Science.gov (United States)

    Hull, Glynda A.

    2014-01-01

    This response to Katherine Schultz's Presidential Address to the Council on Anthropology and Education explores the themes of temporality and reflexivity in activist scholarship, with Schultz's research as prime example. The need to take action to address a crisis, juxtaposed to the counter need to take time for scholarly reflection and…

  6. Dust settles at Dalrymple Bay Terminal

    International Nuclear Information System (INIS)

    2006-01-01

    With an annual loading capacity approaching 60Mt, Queensland's Dalrymple Bay Coal Terminal is one of the largest and most efficient coal export facilities in Australia. Each day, DBCT handles thousands of tonnes of coal transported directly from the Bowen Basin via an electrified railway and bound, ultimately, for out-loading onto bulk carrier ships. It is little wonder then that dust control and an accurate knowledge of coal moisture content are key priorities for DBCT. In early 2004, these priorities, together with an undertaking to the Co-ordinator General to reduce dust emissions, saw DBCT investigate the CSIRO-developed Low Frequency Microwave (LFM) Moisture Analyser. The LFM Analyser is specifically designed to deliver accurate, online measurements of moisture in continuous on-conveyor applications. At this stage, it was already enjoying significant success in the iron ore market with BHP Billiton Iron Ore investing in multiple units as part of its moisture control strategy for the Marra Mamba ore-types. The LFM Analysers, now being commercialised by spin-out company Intalysis, were commissioned in July 2004. Babcock and Brown Infrastructure (BBI), the company that holds the long-term leasehold of DBCT, was heavily involved in the analyser's commissioning. BBI's electrical supervisor Doug Mitchell says the analyser offers the means for DBCT to meet the environmental conditions of the terminal license while at the same time enabling it to meet its individual contract obligations with the terminal customers. 'This basically involves ensuring the moisture content for each coal type does not exceed that which has been agreed upon with terminal customer,' Mitchell says. DBCT has installed two analysers on the in loading conveyors, each about 100m from the coal discharge hoppers. They are fitted to steel cord belts at a nominal speed of around 6m/sec that carry the coal to either 4250tph or 5500tph yard stacking machines, depending on the string selected for stockpiling. The analysers deliver real-time measurements of coal moisture levels that DBCT then uses to guide its water addition needs for dust mitigation. 'The analysers were originally installed on the outloading system so that calibration checks could be carried out,' Mitchell says. This involved extensive ISO sampling, with individual calibrations obtained for 29 different coal types to ensure the best accuracy. The analysers delivered typical accuracies of between 0.2- 0.4%, one standard deviation, across the coal types. Measurements were achieved at the highest tonnage rates and auto-switching of calibration curves via a plant interface was effectively demonstrated. 'Extensive independent trials enabled the optimum dust extinction moisture (DEM) levels of each coal type handled at the terminal to be identified and agreed upon by DBCT and the individual terminal users,' Mitchell says. As such, DBCT is effectively using the analysers as an 'upper clamp' on the moisture added to the coal. BBI says customers of DBCT and the surrounding community will benefit greatly from the investment in the LFM Analysers. 'The real-time moisture measurements provided by the analysers will assist DBCT to manage contracted moisture content while at the same time enabling optimum DEM to be achieved,' Mitchell says. 'Through the increased understanding of the moisture levels of the coals handled, DBCT can optimise its dust control measures to ultimately help improve the terminal's environmental performance and relationship with the surrounding community.' Following the successful commissioning of the analysers, DBCT has begun the process of integrating them in its control loops for automated water addition. DBCT anticipates this will be complete by the end of May. DBCT also plans to invest in a third unit with the design of its new conveyor, Inloading No 3, including an LFM Analyser. Copyright (2006) Reed Business Information

  7. Joke as a means of conflict settling

    Directory of Open Access Journals (Sweden)

    Yana A. Sadovnikova

    2016-09-01

    Full Text Available The article is devoted to the use of jokes as one of the verbal means of deintensification of confrontation. The examples from modern English works of art illustrating the use of jokes at different stages of the conflict are presented. As a rule, a joke can be used in open and post-conflict phases, the latent phase of the conflict is not expressed. The use of jokes on the open stage of the conflict can create a kind of tipping point to change the course of the conflict, and thereby help to resolve it. On the post-conflict stage, a joke helps to build relationships that can be important preventing renewed conflict. The article draws attention to the combination of other means of deintensification confrontation with a joke to achieve the best result in the conflict settlement process. The verbal means can be referred to the apology and change of subject, non-verbal gestures and kisses, para-verbal — soothing tone. All of these funds, if used in conjunction with a joke, contribute to a successful resolution of the conflict. They can also enhance the effect of the joke, which is especially important in the case of non-verbal means. The author notes that the effectiveness of the joke depends on both sides — how well one of the interviewees apply the tool and how the second would take it. In the case of a failed joke, the conflict is likely to increase.

  8. VERO MODA Settles in Taobao Mall

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ In the wake of the successive opening up of Jack&Jones' and ONLY's official flagship stores in Taobao Mall, the Danish Bestseller Fashion Group's other brand, VERO MODA, landed the Mall on July 2nd. At present, the first two brands' online sales have exceeded 500 million yuan per month. Based on the encouraging sales figures, VERO MODA, as Bestseller's third-largest brand on Taobao platform, is expected to scale new network marketing miracle.

  9. Dust settles around election results / Karl Haljasmets

    Index Scriptorium Estoniae

    Haljasmets, Karl

    2011-01-01

    6. märtsil Eestis toimunud parlamendivalimiste tulemustest. Ajakirjanik Abdul Turay leiab, et kõik riigikokku pääsenud erakonnad võivad oma tulemustega rahul olla. Tõnis Saartsi, Jüri Ratase, Aleksei Lotmani, Urmas Kruuse ja Jorgen Siili arvamusi

  10. Job resumption status, hindering factors, and interpersonal relationship within post-heart transplant 1 to 4 years as perceived by heart transplant recipients in Taiwan: a between-method triangulation study.

    Science.gov (United States)

    Tseng, P H; Wang, S S; Chang, C L; Shih, F J

    2010-12-01

    This project examined heart transplant (HT) recipients' perspectives of (a) the changes in their working competence (WC), status for job resumption and related factors at 1- to 2-year, 2- to 3-year, and 3- to 4-year stages; and (b) impacts of HT on interpersonal relationships (IPR). We used a between-method triangulation (including qualitative and quantitative data) design. Quantitative data were collected using the Vertical Visual Analogue Scale and Taiwan's version of the World Health Organization Health-Related Quality-of-Life (HRQoL) questionnaire. Six qualitative semistructured questions were further applied to explore social and environmental domains. The Fifty subjects (86% males and 14% females) had an age range from 20 to 70 years old (mean, 47.68 years). Their post-HT time ranged from 1 to 4.1 years with 42%, 42%, and 16% at 1- to 2-, 2- to 3-, or 3- to 4-years post-HT, respectively. Within 6 months, 10% of administration or restaurant staff, and police resumed their jobs. At 6 to 12 months, 8% of administration, quality control, and design and planning staff resumed their jobs. At 12 months, 14% of educators, insurance personnel, managers, informatics engineers, and ironworkers resumed their jobs. Hindering factors to returning to work included (a) physical (ie, lack of energy, second heart attack, recurrence of rejection, physical discomforts of dizziness, memory lapses/lack of concentration or bone pain from osteoporosis); (b) psychological (ie, lack of confidence, worries about discrimination, being different, maladaptation); and (c) environmental (inadequate job opportunities due to poor socioeconomic conditions). Additionally, 34% reported worse IPR after HT due to diet limitations, slower pacing, less contacts with friends, and changes in personality. Reflections on both the meaning and value of life caused 10% to report better IPR with a better personality and positive mindset. By the end of the first postoperative year, the mean score of HRQoL in

  11. Closing the gaps to eliminate mothertochild transmission of HIV MTCT in South Africa: Understanding MTCT case rates factors that hinder the monitoring and attainment of targets and potential game changers

    Directory of Open Access Journals (Sweden)

    U Feucht

    2018-03-01

    Full Text Available Background. Ninety percent of the world’s HIV-positive pregnant women live in 22 countries. These 22 countries, including South Africa (SA have prioritised the elimination of mother-to-child transmission of HIV (EMTCT. Since 2016 all 22 countries recommend lifelong antiretroviral treatment for all HIV-positive pregnant and lactating women. To measure South African national, provincial and district-level progress towards attaining EMTCT, we analysed the number of in utero (IU paedatric HIV infections per 100 000 live births (IU case rate, and synthesised factors hindering the monitoring of EMTCT progress and attainment from the viewpoint of provincial and district-level healthcare managers and implementers. We highlight potential innovations to strengthen health systems and improve EMTCT programme delivery. Methods. We reviewed national-, provincial- and district-level birth HIV testing data from routine National Health Laboratory Services (NHLS records between April 2016 and March 2017. To obtain a qualitative perspective from healthcare managers and implementers, we synthesised information from the nine 2016 provincial-level EMTCT stock-taking workshops. These workshops involve key provincial and district-level staff, mentors and supporting partners. Lastly, we highlight potential innovations presented at these workshops to overcome operational challenges. Results. The national IU mother-to-child transmission (MTCT rate was 0.9%, which translated to an IU case rate of 245 HIV-positive neonates per 100 000 live births. Provincial IU percent MTCT risk ranged from 0.6% to 1.3%, with IU case rates ranging between 168 and 325 cases per 100 000 live births. District-level IU percent MTCT risk ranged from 0.4% to 1.9%. Potential game changers include: pre-conception counselling to optimise maternal-partner health, weekly dissemination of HIV polymerase chain reaction (PCR and viral load reports from the NHLS to specific individuals who

  12. Calculation of the settling zone of a mixing-settling extractor

    International Nuclear Information System (INIS)

    Karpacheva, S.M.

    1987-01-01

    An attempt is made to construct a parameter-sensitive model for the optimal dimensional configuration of a mixer-settler for the extraction of uranyl and other nitrates with various solutions of tributylphosphate as the solvent. The model accounts for the emulsion and hydraulic behavior of the phases of the starting solutions as well as electrostatic and surface tension considerations and is shown to be capable of incorporating and assessing the separation rate and time dependence accurately for a wide range of dimensions. Nitrates of sodium, aluminium, and ammonium are used as the test extractants

  13. Hindered El Transitions in Eu155 and Tb161

    International Nuclear Information System (INIS)

    Malmskog, Sven G.

    1965-02-01

    The absolute E1 transition probabilities from the 3/2 + (411), 5/2 - (532) and 7/2 - (523) single particle levels in Eu 155 and Tb 161 have been measured by the method of delayed coincidences. This gave half lives of T 1/2 1/2 = (1.38 ± 0.06) ns for the 104.4 and 246 keV levels in Eu 155 . T 1/2 = (0.84 ± 0.04) ns and T 1/2 161 . The result has been compared with the calculations of a single particle in a deformed potential made by Nilsson

  14. Ebola Policies That Hinder Epidemic Response by Limiting Scientific Discourse

    OpenAIRE

    Asgary, Ramin; Pavlin, Julie A.; Ripp, Jonathan A.; Reithinger, Richard; Polyak, Christina S.

    2015-01-01

    There is an unprecedented epidemic of Ebola virus disease (EVD) in west Africa. There has been a strong response from dedicated health professionals. However, there have also been irrational and fear-based responses that have contributed to misallocation of resources, stigma, and deincentivizing volunteers to combat Ebola at its source. Recently, the State of Louisiana Department of Health and Hospitals issued a ban on those coming from affected countries wishing to attend the annual meetings...

  15. Congressional Oversight of Homeland Security: Help or Hinderance?

    Science.gov (United States)

    2012-12-01

    1956, the SASC identified what they viewed as a duplication of efforts between the Army and the Air Force. The Army had sought to fund a Nike ...The “ Nike -Talos dispute” was only one of several disagreements between services Congress mediated in the late 1950s.218 As Thomas McNaugher wrote in

  16. Ethnic Minorities' Impression Management in the Interview: Helping or Hindering?

    Science.gov (United States)

    Derous, Eva

    2017-01-01

    Cross-cultural impression management (IM) has not been considered much, which is remarkable given the fast rate at which the labor market is becoming multicultural. This study investigated whether ethnic minorities and majorities differed in their preference for IM-tactics and how this affected ethnic minorities' interview outcomes. A preliminary study (focus groups/survey) showed that ethnic minorities (i.e., Arab/Moroccans) preferred 'entitlements' whereas majorities (i.e., Flemish/Belgians) preferred 'opinion conformity' as IM-tactics. An experimental follow-up study among 163 ethnic majority raters showed no main effect of IM-tactics on interview ratings. Ethnic minorities' use of IM-tactics only affected interview ratings if rater characteristics were considered. Specifically, interview ratings were higher when ethnic minorities used opinion conformity (i.e., majority-preferred IM-tactic) and lower when minorities used entitlements (i.e., minority-preferred IM-tactic) if recruiters were high in social dominance orientation, and when they felt more experienced/proficient with interviewing. IM-tactics are a human capital factor that might help applicants to increase their job chances on the labor market. It is concluded that ethnic minority applicants' preferences for certain IM-tactics might lead to bias even in structured interview settings, but that this depends on ethnic majority recruiters' interview experience and ingroup/outgroup attitudes. Implications for research and practice are discussed.

  17. High freight rates hinder oil markets' return to equilibrium

    International Nuclear Information System (INIS)

    Anon

    2005-01-01

    Hurricane damage to refineries in the US has created shortages of refined products there, boosting imports and sending freight rates across the Atlantic to record levels. The situation was made worse for a time by a strike at France's main oil terminals in the Mediterranean, which prevented some oil tankers from being rapidly redeployed to routes across the Atlantic. Worldscale (WS) rates for routes from the UK and Europe to the US Atlantic and Gulf Coasts rose well above WS500 for clean tonnage during October. High rates were nevertheless not simply confined to product tankers crossing the Atlantic. Rates for crude tankers to the US have also risen, and tightness has begun to appear in some other markets as well. The net result has been to slow down the movement of oil from regions of surplus to those of scarcity, depressing prices in the former and keeping them at high levels in the latter. Atlantic tanker markets look like remaining tight for the rest of the year and perhaps beyond. (author)

  18. Hindered protein dynamics in the presence of a cryoprotecting agent

    Energy Technology Data Exchange (ETDEWEB)

    Koeper, I. [Laboratoire Leon Brillouin, CEA Saclay, 91191 Gif-sur-Yvette (France); Physikdepartment E13, TU Muenchen, 85747 Garching (Germany); Bellissent-Funel, M.C. [Laboratoire Leon Brillouin, CEA Saclay, 91191 Gif-sur-Yvette (France)

    2002-07-01

    We present a study of the influence of trehalose, a well-known cryoprotecting disaccharide, on the dynamics of a protein, the C-phycocyanin. The dynamics is investigated in a time range from some picoseconds to several nanoseconds using different neutron-scattering techniques. Data obtained on samples containing hydrated powders of the protein in the presence of trehalose are compared to that of the protein alone, studied by neutron-scattering techniques as well as by molecular dynamics simulations. The analysis of time-of-flight data gives access to the geometry of the observed motions. These motions can be described via a model of a particle diffusing inside a sphere. We observe a slowing down of the movements of the protein due to the presence of trehalose of one to two orders of magnitude, while the geometry of the motions is conserved. (orig.)

  19. Corporal Punishment: Does It Hinder the Development of Children?

    Science.gov (United States)

    Chenoweth, T.; Just, H.

    Noting that parents' use of corporal punishment to discipline their children remains a strongly debated issue, this paper examines the impact of corporal punishment on children's development, focusing primarily on its long-term effectiveness. The paper presents the history of spanking in the United States, including public opinion on corporal…

  20. Action plans can interact to hinder or facilitate reach performance.

    Science.gov (United States)

    Fournier, Lisa R; Wiediger, Matthew D; Taddese, Ezana F

    2015-11-01

    Executing a reach action can be delayed while retaining another action in working memory (WM) if the two action plans partly overlap rather than do not overlap. This delay (partial repetition cost) occurs when reach responses are under cognitive control. In this study, we investigated whether facilitation (a partial repetition benefit) occurs when reach responses are automatic. We also examined whether the hemisphere controlling the limb or selection of the preferred limb (based on a free-reach task) influences reach performance when the actions partly overlap. Left- and right-handers reached to different stimulus locations to the left and right of body midline with their ipsilateral hand while maintaining an action plan in WM that required the same or the different hand. The results showed a partial repetition benefit for spatially compatible reaches to left and right stimulus locations far from the body midline, but not for those near the body midline. Also, no partial repetition cost was found at any of the stimulus-reach locations. This indicates that automatic reach responses that partly overlap with an action plan maintained in WM are not delayed, but instead can be facilitated (partial repetition benefit). The roles of hemisphere and reach-hand preference in action control and the importance of the degree of feature overlap in obtaining a partial repetition benefit (and cost) are discussed.