Functional suitability of commercially milled rice bran in India for use in different food products.

Science.gov (United States)

Sekhon, K S; Dhillon, S S; Singh, N; Singh, B

1997-01-01

The effect of blending of commercially available full fat and defatted rice brans in India from modern multistage rice mills with parboiling/stabilizing facilities in different food products in comparison to those obtained from laboratory milling of rice is reported. Bread volume and cookie spread decreased but muffin volume increased with the addition of different types of bran to wheat flour, however, the cookie spread factor was not affected by addition of full fat rice bran. The yields of the extrudate were increased by the blending of full fat rice bran but were decreased by the addition of defatted rice bran. Rice brans could be added to different food products to the extent of 5-10%. However, the full fat rice bran could not be used for production of extruded snack food.

Mycoflora and aflatoxigenic species in derivatives of milled rice

Directory of Open Access Journals (Sweden)

LIMA Carlos A. P.

2000-01-01

Full Text Available Thirty samples of rough rice stored for 6, 12 and 24 months in government authorized warehouses of the state of Rio Grande do Sul, Brazil, were simultaneously collected. After milling of the product, 90 samples (30 of polished rice, 30 of rice bran and 30 of rice hull were evaluated for their mycoflora, aflatoxigenic species and aflatoxin contamination. The following fungi, listed in decreasing order of frequency, were isolated on Potato-Dextrose Agar: Aspergillus spp., Nigrospora spp., Penicillium spp.; Fusarium spp.; Mucor spp.; Cladosporium spp.; Trichosporon spp. and non-sporulated fungi. The degree of fungal contamination (colony forming units per gram of product was lowest in polished rice, increasing progressively in samples of rice bran and rice hull. Among the Aspergillus species, A. flavus and A. candidus were isolated most frequently. Of the A. flavus isolates, 52.6% strains were found to be toxigenic and produced only Group B aflatoxins. Analysis of the 90 samples did not reveal the presence of aflatoxins in the rice derivatives.

Consumer Acceptance and Preference Study [CAPS] on Brown and Under Milled Indian Rice Varieties in Chennai, India

Science.gov (United States)

Sudha, Vasudevan; Spiegelman, Donna; Hong, Biling; Malik, Vasanti; Jones, Clara; Wedick, Nicole M.; Hu, Frank B.; Willett, Walter; Bai, Mookambika Ramya; Ponnalagu, Muthu Mariyammal; Arumugam, Kokila; Mohan, Viswanathan

2013-01-01

Objectives To study consumer acceptance of unmilled brown and under milled rice among urban south Indians. Methods Overweight and normal weight adults living in slum and non-slum residences in Chennai participated (n=82). Bapatla (BPT) and Uma (red pigmented) rice varieties were chosen. These rice varieties were dehusked (unmilled, 0% polish) and further milled to 2.3% and 4.4% polishing (under milled). Thus nine rice samples in both raw and parboiled forms were provided for consumer tasting over a period of three days. A hedonic 7-point scale was used to rate the consumer preferences. A validated questionnaire was used to collect demographic, anthropometric, medical history, physical activity, dietary intake data and willingness of the consumers to switch over to brown rice. Results Consumers reported that the color, appearance, texture, taste and overall quality of the 4.4% polished rice was strongly preferred in both varieties and forms. Ratings for 0% polished (brown rice) were substantially lower than those of 2.3% polished rice, which were intermediate in ratings between 0% and 4.4% polishing. However, most of the consumers (93%) expressed willingness to substitute brown or 2.3% polished rice if affordable after the taste tests and education on nutritional and health benefits of whole grains. Conclusion While most consumers’ preferred polished white rice, education regarding health benefits may help this population switch to brown or under milled rice. Cooking quality and appearance of the grains were perceived as the most important factors to consider when purchasing rice among Chennai urban adults. PMID:24015699

Occupational hearing loss of market mill workers in the city of Accra, Ghana.

Science.gov (United States)

Kitcher, Emmanuel D; Ocansey, Grace; Abaidoo, Benjamin; Atule, Alidu

2014-01-01

Noise induced hearing loss (NIHL) is an irreversible sensorineural hearing loss associated with exposure to high levels of excessive noise. Prevention measures are not well established in developing countries. This comparative cross sectional study aims to determine the prevalence of hearing loss in both a group of high risk workers and a control group and to assess their knowledge of the effects of noise on hearing health. A total of 101 market mill workers and 103 controls employed within markets in the city of Accra, Ghana, were evaluated using a structured questionnaire and pure tone audiometry. The questionnaire assessed factors including self-reported hearing loss, tinnitus, knowledge on the effects of noise on hearing health and the use of hearing protective devices. Pure tone audiometric testing was conducted for both mill workers and controls. Noise levels at the work premises of the mill workers and controls were measured. Symptoms of hearing loss were reported by 24 (23.76%) and 8 (7.7%) mill workers and controls respectively. Fifty-five (54.5%) and fifty-four (52.37%) mill workers and controls exhibited knowledge of the effects of noise on hearing health. Five (5.0%) mill workers used hearing protective devices. There was significant sensorineural hearing loss and the presence of a 4 kHz audiometric notch among mill workers when compared with controls for the mean thresholds of 2 kHz, 3 kHz and 4 kHz (P = 0. 001). The prevalence of hearing loss in the better hearing ears of the mill workers and controls was 24.8% and 4.8% respectively (P hearing loss, which may be characteristic of NIHL in the better hearing ears of the mill workers and controls was 24.8% and 4.8% respectively. The majority of mill workers did not use hearing protection.

Occupational hearing loss of market mill workers in the city of Accra, Ghana

Directory of Open Access Journals (Sweden)

Emmanuel D Kitcher

2014-01-01

Full Text Available Noise induced hearing loss (NIHL is an irreversible sensorineural hearing loss associated with exposure to high levels of excessive noise. Prevention measures are not well established in developing countries. This comparative cross sectional study aims to determine the prevalence of hearing loss in both a group of high risk workers and a control group and to assess their knowledge of the effects of noise on hearing health. A total of 101 market mill workers and 103 controls employed within markets in the city of Accra, Ghana, were evaluated using a structured questionnaire and pure tone audiometry. The questionnaire assessed factors including self-reported hearing loss, tinnitus, knowledge on the effects of noise on hearing health and the use of hearing protective devices. Pure tone audiometric testing was conducted for both mill workers and controls. Noise levels at the work premises of the mill workers and controls were measured. Symptoms of hearing loss were reported by 24 (23.76% and 8 (7.7% mill workers and controls respectively. Fifty-five (54.5% and fifty-four (52.37% mill workers and controls exhibited knowledge of the effects of noise on hearing health. Five (5.0% mill workers used hearing protective devices. There was significant sensorineural hearing loss and the presence of a 4 kHz audiometric notch among mill workers when compared with controls for the mean thresholds of 2 kHz, 3 kHz and 4 kHz (P = 0. 001. The prevalence of hearing loss in the better hearing ears of the mill workers and controls was 24.8% and 4.8% respectively (P < 0.5. The prevalence of hearing loss, which may be characteristic of NIHL in the better hearing ears of the mill workers and controls was 24.8% and 4.8% respectively. The majority of mill workers did not use hearing protection.

Effect of extrusion on phytochemical profiles in milled fractions of black rice.

Science.gov (United States)

Ti, Huihui; Zhang, Ruifen; Zhang, Mingwei; Wei, Zhencheng; Chi, Jianwei; Deng, Yuanyuan; Zhang, Yan

2015-07-01

The phytochemical profile and antioxidant activities of unprocessed and extruded milled fractions of black rice were investigated. Extrusion increased the free phenolics, anthocyanins and oxygen radical absorbance capacity (ORAC) and decreased the bound forms. The total phenolics, anthocyanins and ORAC increased by 12.6%, 5.4% and 19.7%, respectively, in bran. Extrusion decreased both free and bound phenolics and anthocyanins while ORAC values decreased by 46.5%, 88.4% and 33.1%, respectively, in polished rice and by 71.2%, 87.9% and 14.7%, respectively, in brown rice. A total of seven phenolics, gallic, chlorogenic, vanillic, caffeic, syringic, p-coumaric and ferulic acids, were detected in both forms. Cyanidin 3-glucoside (Cy-3-G), cyanidin 3-rutinoside and peonidin 3-glucoside were also detected with Cy-3-G found in the highest amounts in unprocessed and extruded rice bran. These results provide the basis for the development of different milled fractions of extruded black rice with balanced nutritional characteristics for today's functional food markets. Copyright © 2015. Published by Elsevier Ltd.

Determination of sixteen elements and arsenic species in brown, polished and milled rice.

Science.gov (United States)

Narukawa, Tomohiro; Matsumoto, Eri; Nishimura, Tsutomu; Hioki, Akiharu

2014-01-01

The concentrations of 16 elements in 10 rice flour samples and the distribution of the elements in the rice grains from which the flour were made were determined by ICP-MS and ICP-OES after microwave-assisted digestion of the samples. Arsenic speciation analysis was carried out by HPLC-ICP-MS following heat-assisted extraction of the sample. The concentrations of inorganic As (As(III) and As(V)), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) and their distribution in the rice grains were determined. Portions of the brown rice were polished/milled to different degrees to yield milled off samples and polished rice samples. All samples were powdered and analyzed for 16 elements and for As species. The recoveries and mass balances for all elements in all samples showed good agreements with the starting materials. As(III), As(V), MMAA and DMAA were detected, and the sums of the concentrations of all species in the extract were 86-105% of the total As concentration in each case.

Genotypic differences in arsenic, mercury, lead and cadmium in milled rice (Oryza sativa L.).

Science.gov (United States)

Jiang, Shuli; Shi, Chunhai; Wu, Jianguo

2012-06-01

The contents of arsenic, mercury, lead and cadmium in milled rice were determined. Among 216 genotypes, the As, Hg, Pb and Cd contents were ranged from 5.06 to 296.45, 2.46 to 65.85, 4.16 to 744.95 and 5.91 to 553.40 ng/g, respectively. Six genotypes with lower contents of toxic metal elements were selected. The averages of As and Pb contents for indica rice were higher than those of japonica rice, while the averages of Hg and Cd contents were in contrast. Compared with white brown rice, the milled rice from black and red brown rice contained lower contents of four elements. Significant negative correlation was found between As content and alkaline spread value. Significant correlations were observed between As and aspartic acid (Asp) content, Hg and Asp or leucine contents, Pb and cysteine or methionine contents. Cd content was significantly negatively correlated with protein and 14 amino acid contents.

Seasonal Patterns of Stored-Product Insects at a Rice Mill.

Science.gov (United States)

McKay, Tanja; White, Amanda L; Starkus, Laura A; Arthur, Frank H; Campbell, James F

2017-06-01

The temporal and spatial patterns in flight activity outside of a rice mill were evaluated for the lesser grain borer [Rhyzopertha dominica (F.)], warehouse beetle [Trogoderma variabile Ballion], cigarette beetle [Lasioderma serricorne (F.)], and Indian meal moth [Plodia interpunctella (Hüϋbner)] to determine critical times of year when the mill would be vulnerable to invasion. Insect activity was monitored using pheromone-baited glue traps (N = 99) from June 2008 to October 2010. Traps were placed along exterior walls of all major buildings and along the fence around the perimeter of the facility. Trogoderma variabile was the most abundant species, with flight activity between mid-March and November. No activity of T. variabile was observed during December through March. Rhyzopertha dominica was also abundant, with activity in mid-April through October. A few adult R. dominica were captured in traps during winter months in the first year of study. Trap captures for all four species increased with an increase in temperature and can be described by linear equations. Knowing seasonal patterns in insect activity allows rice facilities to better understand when facilities are most vulnerable to pest activity. However, this study demonstrates that more research is needed to address how insects are immigrating and emigrating within and around a rice mill. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

An update on the use of co-products from the milling of rice in value added food products

Science.gov (United States)

Because of the huge quantity of rice produced annually, milled-rice co-products; such as, rice bran, rice oil, rice wax, rice flour, and rice hull are plentiful and readily available. These co-products could be valuable sources of food ingredients, but they have been vastly under-utilized. Rice bra...

Grain dust and respiratory health in South African milling workers.

Science.gov (United States)

Bachmann, M; Myers, J E

1991-01-01

Respiratory health was investigated in 224 grain milling workers. The likelihood of respiratory symptoms and chronic airflow limitation was raised for workers exposed to dust independent of the effects of smoking. Smokers were more likely than non-smokers to respond to a bronchodilator at the end of the working week. Dust was more strongly associated with most abnormal outcomes than was smoking. Subjective categories of exposure to dust were more strongly associated with most abnormal outcomes than were objective categories. The prevalence of all symptoms at the time of a survey conducted at the mill six years before was higher in workers who subsequently left the mill than in those who remained employed although the differences were not significant. PMID:1931723

Radiation exposure of uranium mill workers

International Nuclear Information System (INIS)

Jha, Giridhar; Saha, S.C.

1982-01-01

The uranium mill workers at Jaduguda were covered by a regular film badge service from 1969 onwards. Since the log normal plot is useful in interpreting occupational exposure, a statistical analysis of the radiation exposure data was attempted. Exposure data for each year has been plotted as cumulative percentage and worker's population with exposure levels in different class intervals. The plot for each of the year under investigation shows an occupational exposure distribution more or less consistent with the log normal distribution function. The analysis shows that more than 98% of radiation workers received less than 200 mrem (2 mSv). (author)

76 FR 2145 - International Paper Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2011-01-12

... Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From Railserve, Franklin, VA..., applicable to workers and former workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin... follows: All workers International Paper Company, Franklin Pulp & Paper Mill, including on-site leased...

Milling, Nutritional, Physical and Cooking Properties of Four Basmati Rice Varieties

Directory of Open Access Journals (Sweden)

Pravin Ojha

2018-05-01

Full Text Available Rice is one of the most popular staple foods produced contributing higher most in agriculture gross domestic production in Nepal. Thus, nutritional, physicochemical, and cooking properties of rice might interplay important roles in their production and farming practice, therefore, it is inevitable to understand these characteristic features. However, there has been only limited information available on such properties, therefore we aimed to examine nutritional, physicochemical and cooking properties of four Basmati varieties of rice namely Red Basmati, White Basmati, Black Basmati and Pokhareli Basmati. These rice varieties were purchased from different places in Nepal in paddy form. In this study various parameters associated with milling, nutritional, physical and cooking properties were evaluated. To measure protein contents in rice, Kjeldal method was implied. Among the varieties, the protein content was maximum in Red Basmati (7.74% and minimum in Black Basmati (6.51%. The milled rice percentage and head rice recovery were maximum in Pokhareli Basmati represented by 72.02±0.10 and 67.46±0.42, respectively, while and minimum in White Basmati represented by 68.17±0.50 and 65.11±0.28, respectively. The kernel elongation ratio and volume expansion ratio was maximum in Red Basmati represented by 1.62 and 2.85 respectively. Water uptake ratio was maximum 3.11 in Black Basmati and minimum of 2.18 in Red Basmati. Gruel loss was found lowest 1.05% in Red Basmati and highest represented by 2.40% in Black Basmati. The highest starch iodine blue value of 0.21 was observed in Red Basmati and lowest of 0.12 in Black Basmati. The Red Basmati was found to have the better cooking quality among all varieties.

77 FR 70477 - Verso Paper Corporation, Sartell Mill Division, Including On-Site Leased Workers From Securitas...

Science.gov (United States)

2012-11-26

..., Sartell Mill Division, Including On-Site Leased Workers From Securitas Security Services, Manpower, Inc..., applicable to workers and former workers of Verso Paper Corporation, Sartell Mill Division, Sartell... to TA-W-81,210 is hereby issued as follows: All workers of Verso Paper Corporation, Sartell Mill...

Morphological and starch structural characteristics of the Japonica rice mutant variety Seolgaeng for dry-milled flour

Science.gov (United States)

Producing fine, good quality rice flour is more difficult than wheat flour because the rice grain is harder. In this study, we analyzed the relationship between the morphology and starch of kernels from genetically different rice varieties that can be used to make dry-milled flour. The non-glutinous...

Training manual for uranium mill workers on health protection from uranium

International Nuclear Information System (INIS)

McElroy, N.; Brodsky, A.

1986-01-01

This report provides information for uranium mill workers to help them understand the radiation safety aspects of working with uranium as it is processed from ore to yellowcake at the mills. The report is designed to supplement the radiation safety training provided by uranium mills to their workers. It is written in an easily readable style so that new employees with no previous experience working with uranium or radiation can obtain a basic understanding of the nature of radiation and the particular safety requirements of working with uranium. The report should be helpful to mill operators by providing training material to support their radiation safety training programs

Evaluation of Dust Exposure among the Workers in Agricultural Industries in North-East India.

Science.gov (United States)

Dewangan, Krishna N; Patil, Mahesh R

2015-11-01

This study aims to quantify dust exposure among the workers in four different industrial settings: rice mills, flour mills, oil mills, and tea factories and to compare the obtained data with the permissible exposure limit (PEL) of Indian Union Ministry of Labour as well as to compare the dust exposure across activities and seasons. RespiCon(TM) particle sampler was used for collecting dust concentration in the breathing zone of the workers. In total, 149 workers participated in the study and 204 samples were collected. Samples were collected in the vicinity of different processing operations. Samples in the rice mills were collected for two consecutive years in two seasons; however samples from other industries were collected for 1 year. The results indicate that geometric mean (GM) of dust exposure was significantly (P workers are exposed to higher level of respirable dust as compared to the PEL, while total dust exposure to all the workers were higher than the PEL; thus, immediate reduction of dust exposure among the workers is necessary for preventing respiratory system impairment. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

75 FR 26794 - International Paper Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From...

Science.gov (United States)

2010-05-12

... Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From Railserve, Franklin, VA; Amended... workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin, Virginia. The notice was... Pulp & Paper Mill. The Department has determined that these workers were sufficiently under the control...

75 FR 69471 - Smurfit-Stone Container Corporation, Containerboard Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2010-11-12

... Corporation, Containerboard Mill, Including On-Site Leased Workers From KMW Enterprises, Ontonagon, MI... to workers of Smurfit-Stone Container Corporation, Containerboard Mill, Ontonagon, Michigan. The... Ontonagon, Michigan location of Smurfit-Stone Container Corporation, Containerboard Mill. The Department has...

77 FR 40637 - Smurfit-Stone Container Corporation, Containerboard Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2012-07-10

... Corporation, Containerboard Mill, Including On-Site Leased Workers From KMW Enterprises and General Security... Assistance on May 6, 2010, applicable to workers of Smurfit-Stone Container Corporation, Containerboard Mill... Ontonagon, Michigan location of Smurfit-Stone Container Corporation, Containerboard Mill, Ontonagon...

Preliminary Study on Non-Fatal Occupational Injury among Operational Workers in Malaysia Palm Oil Mill

Directory of Open Access Journals (Sweden)

Ruslan Rumaizah

2017-01-01

Full Text Available Non-fatal occupational injury had becoming major global concern and its consequences to safety and health would be heavily burdening. The aim of this preliminary study was to investigate the distribution of non-fatal occupational injury among specific group of workers in palm oil mill and to acknowledge potential factors of injury causation. A questionnaire survey was designed to assess injury involvement during the employment period among operational workers of palm oil mill located in Southern Peninsular Malaysia. Thirty three (n= 33 workers volunteered and completed the questionnaire. Prevalence of injury among palm oil mill workers was 39.4% with sprain and burn were the common types of injury reported. Press Plant workers reported to have high cases of injuries. Majority of workers (78.8% stated noise was the main hazard in the palm oil mill, followed by heat hazard. Press Plant was identified as one of the specific risk group in palm oil mill based on the rate of injury occurrences reported by the workers. Exposure to noise hazard was estimated to be one of the potential factors of injury causation and further study should be made to measure the risk of hazard.

Oxidative Role of Aflatoxin B1 on the Liver of Wheat Milling Workers

Directory of Open Access Journals (Sweden)

Amal Saad-Hussein

2014-03-01

Full Text Available Aim: The study aimed to estimate oxidative role of aflatoxin B1 (AFB1 on the liver in wheat milling workers. Materials and Methods: Case-control study was conducted to compare between the levels of AFB1/albumin (AFB1/alb, liver enzymes (ALT, AST, GGT, and ALP, P53, MDA, GST, SOD, zinc and vitamin C in 35 wheat milling workers and 40 control subjects. Results: Statistical analysis revealed that ALT, AST, GGT, ALP, P53, MDA, GST and SOD in workers were significantly elevated compared to their controls. In the milling workers, there were significant correlations between MDA levels and the levels of AST, GGT, and P53, while, P53 was inversely correlated with GST and SOD activities. There were significant correlations between Zn levels and GGT, GST and SOD activities, between vitamin C and GST activities, and vitamin C inversely correlated with MDA. Conclusion: The present study concluded that the oxidative stress of AFB1 elevated the MDA and the liver enzymes in wheat milling workers. GST has a crucial role in the detoxification of aflatoxin and SOD as a scavenger antioxidant increased in the workers to overcome the oxidative toxic effects of AFB1 on the liver of the workers, and roles of Zn and vitamin C were significant in activation of these processes.

A case-referent study of cancer mortality among sulfate mill workers in Sweden.

Science.gov (United States)

Andersson, E; Hagberg, S; Nilsson, T; Persson, B; Wingren, G; Torén, K

2001-05-01

To investigate whether workers in Swedish sulfate mills have an increased risk of death from certain malignancies that have previously been linked to the pulping process. Subjects of the study (n=2480) were men aged 40-75 at death during 1960-89 in the parishes surrounding four sulfate mills. Exposure assessment was based on information from the personnel files in the mills- 35% of the subjects were recognised there, and work categories were created. Among all sulfate mill workers, the odds ratio (OR) (90% confidence interval (90% CI)) for death from lung cancer was 1.6 (1.1 to 2.3), pleural mesotheliomas 9.5 (1.9 to 48), brain tumours 2.6 (1.2 to 5.3), and liver or biliary tract cancer 2.3 (1.0 to 5.2). There was an increased mortality from leukaemia among workers in the soda recovery plant (5.9 (2.6 to 13)) and bleaching plant and digester house (2.8 (1.0 to 7.5)). Sulfate mill workers were at increased risk of dying from lung cancer and pleural mesotheliomas, probably due to exposure to asbestos. Increased risks of brain tumours and cancers of the liver or biliary tract were also found but the aetiology is not obvious.

Development of Rice Reprocessing to Strengthen Small Scale Rice Mills in Indramayu West Java

Science.gov (United States)

Firdaus, Y. R.; Hasbullah, R.; Djohar, S.

2018-05-01

Small Rice Mill (SRM) has a very important role in rice production of strong institutional relationships to farmers and rice markets. Nevertheless, the rice produced in low quality and changing consumer preferences cause SRM to have difficulty in maintaining the role. Development of a reprocessing business - called Rice to Rice Processing Plant (R2RP) - as a separate business unit will support their role and existence. This study aimed at analyzing the feasibility of R2RP business that integrates SRM and market as an independent business unit and determines mutual partnership pattern. The study was conducted with special reference to West Java Province. The qualitative method used for non-financial aspects analysis includes raw material, market, technical-technological, management and regulation and partnership pattern. The financial aspect used the quantitative method of Net Present Value (NPV), Net Benefit Cost Ratio (Net B/C), Internal Rate of Return (IRR), Payback Period (PP) and Switching Value to check their sensitivity.The results showed R2R business is feasible for non-financially, technical-technological and financial aspects. Technology has evolved to produce various qualities (premium or medium) after the quality of raw materials (low quality or off-grade rice) using profit optimization. Value of the financial parameters was NPV of Rp 137 billion, Net B/C of 5.80, IRR of 84.27 percent and PP of 2.18 years at capacity of 19,800 tons/year with total investment of Rp 30 billion (Rp 13,500/USD). The switching value analysis showed that a decrease in product prices is sensitively influencing the financial feasibility. To strengthen cooperation that enhancing mutually beneficial relationship, R2R assists equipment investment in and buy raw material from SRM at a rational agreed price.

Mortality patterns among a retrospective cohort of uranium mill workers

International Nuclear Information System (INIS)

Waxweiler, R.J.; Archer, V.E.; Roscoe, R.J.; Watanabe, A.; Thun, M.J.

1983-01-01

The long-term health effects associated with the milling of uranium ore are of interest particularly because of exposures to uranium and thorium-230. Excess risks of pulmonary and lymphatic malignancies have been suggested by previous epdiemiologic studies of persons milling or smelting uranium ores, and nephrotoxic effects of uranium have been reported in both man and animals. To test these three previously reported associations and to assess all cause-specific mortality patterns among uranium mill workers, we carried out a retrospective cohort study of 2002 uranium millers employed in any of seven mills at least one year before 1972. Ninety-eight percent (98%) followup of the cohort through 1977 resulted in 533 deaths observed versus 605 expected from US White male mortality rates. Mortality from most causes was lower than expected. Significant excess risks were found only for nonmalignant respiratory disease and miscellaneous accidents but not for any of the three diseases of a priori interest. However, nonsignificant excesses were found for lymphatic malignancies after 20 years latency and for death due to chronic nephritis among short-term workers

Physical, milling, cooking, and pasting characteristics of different rice varieties grown in the valley of Kashmir India

Directory of Open Access Journals (Sweden)

Tanveer Ahmad Rather

2016-12-01

Full Text Available In the present study, three different rice varieties, namely frome chena (FC, safaid chena (SC, and barkat chena (BC, were evaluated for various quality aspects in terms of physical, milling, cooking, and pasting characteristics. Among the three rice varieties SC had the highest thousand kernel weight and length breadth ratio (L/B. While as, BC had the lowest thousand kernel weight and FC had lowest L/B. Bulk density was found to be highest for FC followed by SC and BC. FC had density of 769.01 kg/m3. Milling characteristic in terms of broken percentage and head rice yield showed non-significant difference between the varieties. Head rice yield was below 70% in all the three varieties. All the three varieties took similar time to cook and cooking time varied non-significantly between 23.66 and 25.83 min. L/B ratio after cooking was found to be highest for FC followed by BC and SC. Elongation ratio of rice after cooking did not varied significantly between varieties. Elongation ratio after cooking ranged from 1.60 to 1.70. Pasting profile of rice flour was determined using rapid visco analyzer. Significant difference was observed in pasting profile of studied rice varieties.

Shift work and sleep disorder among textile mill workers in Bahir Dar, northwest Ethiopia.

Science.gov (United States)

Abebe, Y; Fantahun, M

1999-07-01

To assess the length and quality of sleep among shift workers at Bahir Dar textile mill. A cross sectional study using structured questionnaire that contained sociodemographic variables, duration of work, work schedule, number of sleeping hours, sleep disorders, and associated reasons for such disorders. A textile mill in Bahir Dar, northwest Ethiopia. Three-hundred ninety four random sample of production workers of the mill. Sleep disorders, and the impact of external and home environment on sleep. The mean duration of work in the factory was 25.4 +/- 7.1 years. Ninety-seven per cent of the study population work in a rotating eight hourly shift system. The mean number of hours a worker sleeps after a worked shift was 5.1 +/- 2.3. Two hundred thirty (58.4%) claimed to experience a sleep disorder. Sleep disturbance was significantly associated with rotating shift work, external environmental noise, and working in the spinning department. The majority of the workers in Bahir Dar textile mill experienced sleep disturbances as detailed in the study methodology.

Milling of rice grains. The degradation on three structural levels of starch in rice flour can be independently controlled during grinding.

Science.gov (United States)

Tran, Thuy T B; Shelat, Kinnari J; Tang, Daniel; Li, Enpeng; Gilbert, Robert G; Hasjim, Jovin

2011-04-27

Whole polished rice grains were ground using cryogenic and hammer milling to understand the mechanisms of degradation of starch granule structure, whole (branched) molecular structure, and individual branches of the molecules during particle size reduction (grinding). Hammer milling caused greater degradation to starch granules than cryogenic milling when the grains were ground to a similar volume-median diameter. Molecular degradation of starch was not evident in the cryogenically milled flours, but it was observed in the hammer-milled flours with preferential cleavage of longer (amylose) branches. This can be attributed to the increased grain brittleness and fracturability at cryogenic temperatures, reducing the mechanical energy required to diminish the grain size and thus reducing the probability of chain scission. The results indicate, for the first time, that branching, whole molecule, and granule structures of starch can be independently altered by varying grinding conditions, such as grinding force and temperature.

Toward the complete utilization of rice straw: Methane fermentation and lignin recovery by a combinational process involving mechanical milling, supporting material and nanofiltration.

Science.gov (United States)

Sasaki, Kengo; Okamoto, Mami; Shirai, Tomokazu; Tsuge, Yota; Fujino, Ayami; Sasaki, Daisuke; Morita, Masahiko; Matsuda, Fumio; Kikuchi, Jun; Kondo, Akihiko

2016-09-01

Rice straw was mechanically milled using a process consuming 1.9MJ/kg-biomass, and 10g/L of unmilled or milled rice straw was used as the carbon source for methane fermentation in a digester containing carbon fiber textile as the supporting material. Milling increased methane production from 226 to 419mL/L/day at an organic loading rate of 2180mg-dichromate chemical oxygen demand/L/day, corresponding to 260mLCH4/gVS. Storage of the fermentation effluent at room temperature decreased the weight of the milled rice straw residue from 3.81 to 1.00g/L. The supernatant of the effluent was subjected to nanofiltration. The black concentrates deposited on the nanofiltration membranes contained 53.0-57.9% lignin. Solution nuclear magnetic resonance showed that lignin aromatic components such as p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S) were retained primarily, and major lignin interunit structures such as the β-O-4-H/G unit were absent. This combinational process will aid the complete utilization of rice straw. Copyright © 2016. Published by Elsevier Ltd.

Broken rice kernels and the kinetics of rice hydration and texture during cooking.

Science.gov (United States)

Saleh, Mohammed; Meullenet, Jean-Francois

2013-05-01

During rice milling and processing, broken kernels are inevitably present, although to date it has been unclear as to how the presence of broken kernels affects rice hydration and cooked rice texture. Therefore, this work intended to study the effect of broken kernels in a rice sample on rice hydration and texture during cooking. Two medium-grain and two long-grain rice cultivars were harvested, dried and milled, and the broken kernels were separated from unbroken kernels. Broken rice kernels were subsequently combined with unbroken rice kernels forming treatments of 0, 40, 150, 350 or 1000 g kg(-1) broken kernels ratio. Rice samples were then cooked and the moisture content of the cooked rice, the moisture uptake rate, and rice hardness and stickiness were measured. As the amount of broken rice kernels increased, rice sample texture became increasingly softer (P hardness was negatively correlated to the percentage of broken kernels in rice samples. Differences in the proportions of broken rice in a milled rice sample play a major role in determining the texture properties of cooked rice. Variations in the moisture migration kinetics between broken and unbroken kernels caused faster hydration of the cores of broken rice kernels, with greater starch leach-out during cooking affecting the texture of the cooked rice. The texture of cooked rice can be controlled, to some extent, by varying the proportion of broken kernels in milled rice. © 2012 Society of Chemical Industry.

75 FR 56911 - Request for Public Comment on the United States Standards for Rough Rice, Brown Rice for...

Science.gov (United States)

2010-09-17

... for Rough Rice, Brown Rice for Processing, and Milled Rice AGENCY: Grain Inspection, Packers and... reviewing the United States Standards and grading procedures for Rough Rice, Brown Rice for Processing, and Milled Rice under the Agriculture Marketing Act of 1946 (AMA). Since the standards were last revised...

Risk factors for respiratory work disability in a cohort of pulp mill workers exposed to irritant gases

Directory of Open Access Journals (Sweden)

Torén Kjell

2011-09-01

Full Text Available Abstract Background The association between chronic respiratory diseases and work disability has been demonstrated a number of times over the past 20 years, but still little is known about work disability in occupational cohorts of workers exposed to respiratory irritants. This study investigated job or task changes due to respiratory problems as an indicator of work disability in pulp mill workers occupationally exposed to irritants. Methods Data about respiratory symptoms and disease diagnoses, socio-demographic variables, occupational exposures, gassing episodes, and reported work changes due to respiratory problems were collected using a questionnaire answered by 3226 pulp mill workers. Information about work history and departments was obtained from personnel files. Incidence and hazard ratios for respiratory work disability were calculated with 95% confidence intervals (CI. Results The incidence of respiratory work disability among these pulp mill workers was 1.6/1000 person-years. The hazard ratios for respiratory work disability were increased for workers reporting gassings (HR 5.3, 95% CI 2.7-10.5 and for those reporting physician-diagnosed asthma, chronic bronchitis, and chronic rhinitis, when analyzed in the same model. Conclusions This cohort study of pulp mill workers found that irritant peak exposure during gassing episodes was a strong predictor of changing work due to respiratory problems, even after adjustment for asthma, chronic bronchitis, and chronic rhinitis.

Isotopic tracer aided studies of fenvalerate residues in stored rice

International Nuclear Information System (INIS)

Varca, L.M.; Sanchez, T.E.; Magallona, E.D.

1990-01-01

Following application of 14 C-fenvalerate to milled rice and paddy rice at a concentration of 0.33 mg/kg, only insignificant losses were measured after 9 months. Distribution patterns in surface, methanol extractable and bound residues were studied. Paddy rice contained less extractable residues than milled rice, with the major part being found in the husk. Bound residues in both milled and paddy rice decreased also with length of storage; as much as 30% was found as bound residues after nine months. Cooking reduced the insecticide residues in milled rice by 33-40% and residues in paddy rice by 58%. (author). 8 refs, 1 fig., 4 tabs

Efficacy of Chlorella pyrenoidosa and Scenedesmus abundans for Nutrient Removal in Rice Mill Effluent (Paddy Soaked Water).

Science.gov (United States)

Abinandan, S; Bhattacharya, Ribhu; Shanthakumar, S

2015-01-01

Microalgae are product of sustainable development owing to its ability to treat variety of wastewater effluents and thus produced biomass can serve as value added product for various commercial applications. This paper deals with the cultivation of microalgae species namely Chlorella pyrenoidosa and Scenedesmus abundans in rice mill effluent (i.e., paddy soaked water) for nutrient removal. In order to investigate the nutrient removal capability, microalgae are subjected to cultivation in both raw and autoclaved samples. The maximum phosphate removal by Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 98.3% and 97.6%, respectively, whereas, the removal of ammoniacal nitrogen by Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 92% and 90.3%, respectively. The growth (measured in terms of chlorophyll content) of Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 3.88 mg/l and 5.55 mg/l, respectively. The results indicate the suitability of microalgae cultivation in rice mill effluent treatment for nutrient removal.

Glycaemic indices of different varieties of rice grown in Sri Lanka.

Science.gov (United States)

Hettiarachchi, P; Jiffry, M T; Jansz, E R; Wickramasinghe, A R; Fernando, D J

2001-03-01

Varieties of red raw rice are widely believed to have a better nutritional quality. The physiological effects of consuming different varieties of rice may not be so. The glycaemic index has been developed as an indicator of the physiological effect of foods. It is the glycaemic response of a 50 g carbohydrate portion of food expressed as a percentage of that of a standard. The objective of this study was to determine the glycaemic indices of different varieties of rice grown in Sri Lanka. Digestible carbohydrate content of 11 varieties of rice flour and bread were determined. Fasting blood samples followed by half-hourly samples for two hours were drawn after giving portions of either cooked rice or bread containing 50 g carbohydrate each. Fibre mill in Gampaha district. Twenty-two fibre mill workers aged between 25 and 50 years. The area under the blood glucose curve (AUC) for varieties of rice for a subject was calculated. Average AUC of 3 values for bread were calculated. Glycaemic index of each variety of rice was determined from the above variables. Glycaemic indices of varieties of rice differ. The glycaemic indices of varieties of red raw rice varied between 56 and 73 and the variety Bg 350 had the lowest glycaemic index. There was no significant difference between mean glycaemic index of varieties of white raw and some varieties of red raw rice (p = 0.2). Parboiled varieties of red raw rice had a significantly lower glycaemic index than white raw rice (p = 0.04) and some of the red raw rice (p = 0.005). The glycaemic index cannot be predicted from the colour of the rice grain. Red parboiled varieties of rice and Bg 350 can be recommended for patients with diabetes.

75 FR 20386 - Auburn Hosiery Mills, Inc., Currently Known as Delta Galil, Including On-Site Leased Workers From...

Science.gov (United States)

2010-04-19

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,321] Auburn Hosiery Mills, Inc... Auburn Hosiery Mills, Inc., including on-site leased workers from Quality Personnel, Auburn, Kentucky... related to apparel. Information shows that Auburn Hosiery Mills was merged into its parent company, Delta...

Effect of polishing time and pressure on quality characteristics of rice grain

International Nuclear Information System (INIS)

Karim, M.A.

2002-01-01

Since totally unpolished rice has poor cooking quality, a certain amount of polishing for the removal of the outermost bran layers is essential. To determine the best combination of polishing time and pressure with respect to obtaining optimum quantity/quality, the brown rice (head grains) of a rice strain 4048 was milled for 10, 20, 30 and 40 seconds against 1,2,3,4 and 5 lbs pressure in a Burrows McGill Polisher No. 3. the quality characteristics studied were: total milling recovery, head rice recovery, whiteness of milled rice, protein content of grain, grain length and bursting upon cooking. Both, total milled rice and head rice reduced while the whiteness of milled rice improved significantly with an increase in polishing time and or pressure. The protein content decreased gradually with an increase in time and pressure of milling but the effect was non significant. The cooked grain length increased with an increase in milling degree up to a stage, beyond which it declined. The increase in bursting of grains on cooking. A combination of 20 seconds polishing time with 2 lbs pressure or 20 seconds polishing time with 3 lbs pressure was found to be the best combination of obtaining the optimum quality as well as the quality of milled rice.(author)

75 FR 71463 - Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration

Science.gov (United States)

2010-11-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration By application dated July 22... regarding the eligibility of workers and former workers of Woodland Mills Corporation, Mill Spring, North...

Grain, milling, and head rice yields as affected by nitrogen rate and bio-fertilizer application

Directory of Open Access Journals (Sweden)

Saeed FIROUZI

2015-11-01

Full Text Available To evaluate the effects of nitrogen rate and bio-fertilizer application on grain, milling, and head rice yields, a field experiment was conducted at Rice Research Station of Tonekabon, Iran, in 2013. The experimental design was a factorial treatment arrangement in a randomized complete block with three replicates. Factors were three N rates (0, 75, and 150 kg ha-1 and two bio-fertilizer applications (inoculation and uninoculation with Nitroxin, a liquid bio-fertilizer containing Azospirillum spp. and Azotobacter spp. bacteria. Analysis of variance showed that rice grain yield, panicle number per m2, grain number per panicle, flag leaves area, biological yield, grains N concentration and uptake, grain protein concentration, and head rice yield were significantly affected by N rate, while bio-fertilizer application had significant effect on rice grain yield, grain number per panicle, flag leaves area, biological yield, harvest index, grains N concentration and uptake, and grain protein concentration. Results showed that regardless of bio-fertilizer application, rice grain and biological yields were significantly increased as N application rate increased from 0 to 75 kg ha-1, but did not significantly increase at the higher N rate (150 kg ha-1. Grain yield was significantly increased following bio-fertilizer application when averaged across N rates. Grains N concentration and uptake were significantly increased as N rate increased up to 75 kg ha-1, but further increases in N rate had no significant effect on these traits. Bio-fertilizer application increased significantly grains N concentration and uptake, when averaged across N rates. Regardless of bio-fertilizer application, head rice yield was significantly increased from 56 % to 60 % when N rate increased from 0 to 150 kg ha-1. Therefore, this experiment illustrated that rice grain and head yields increased with increasing N rate, while bio-fertilizer application increased only rice grain

Blood glucose lowering effects of brown rice in normal and diabetic subjects.

Science.gov (United States)

Panlasigui, Leonora N; Thompson, Lilian U

2006-01-01

Carbohydrate foods, which produce low glycemic responses, have been shown to be beneficial in the dietary management of chronic diseases such as diabetes and hyperlipidemia. This study determined the starch digestion rate in vitro and, in a randomised crossover design, the postprandial blood glucose response of 10 healthy and nine type 2 diabetic volunteers to brown rice compared to milled rice from the same batch and variety. The total sugar released in vitro was 23.7% lower in brown rice than in milled rice. In healthy volunteers, the glycemic area and glycemic index were, respectively, 19.8% and 12.1% lower (p brown rice than milled rice, while in diabetics, the respective values were 35.2% and 35.6% lower. The effect was partly due to the higher amounts of phytic acid, polyphenols, dietary fiber and oil in brown compared to milled rice and the difference in some physicochemical properties of the rice samples such as minimum cooking time and degree of gelatinisation. In conclusion, brown rice is a more health beneficial food for diabetics and hyperglycemic individuals than milled rice.

Load Handling and Repetitive Movements Are Associated with Chronic Low Back Pain among Jute Mill Workers in India

Directory of Open Access Journals (Sweden)

S. Goswami

2016-01-01

Full Text Available Introduction. WHO recognizes low back pain as one of the most important ergonomic stressors. Therefore, the present study was designed to find out the magnitude of the problem among jute mill workers in India and identify possible associations. Methodology. This cross-sectional workplace based study was conducted among eight (8 selected jute mills of India. Subjects with self-reported back pain for at least last 12 weeks were included and n=717 male jute mill workers actively engaged in work entered the study and completed all assessments. Results. Among all participants 55% (n=392 had current chronic low back pain. Age was an important association with subjects in the age group of 40–59 years more likely to have pain (p=0.02, OR 1.44. Regarding ergonomic risk factors lifting of load of more than 20 kg (p=0.04, OR 1.42 and repetitive movements of limbs (p=0.03, OR 0.67 were significant associations of chronic low back pain. Conclusion. This study identified a significant prevalence of current chronic low back pain among jute mill workers. Regarding ergonomic risk factors the present study has identified two significant associations: lifting of load above 20 kg and repetitive movements of limbs. Therefore, this study has identified need for workplace interventions in this occupational group employing approximately 3,50,000 workers in India.

Load Handling and Repetitive Movements Are Associated with Chronic Low Back Pain among Jute Mill Workers in India

Science.gov (United States)

Goswami, S.; Dasgupta, S.; Samanta, A.; Talukdar, G.; Chanda, A.; Ray Karmakar, P.; Bhattacharya, D.

2016-01-01

Introduction. WHO recognizes low back pain as one of the most important ergonomic stressors. Therefore, the present study was designed to find out the magnitude of the problem among jute mill workers in India and identify possible associations. Methodology. This cross-sectional workplace based study was conducted among eight (8) selected jute mills of India. Subjects with self-reported back pain for at least last 12 weeks were included and n = 717 male jute mill workers actively engaged in work entered the study and completed all assessments. Results. Among all participants 55% (n = 392) had current chronic low back pain. Age was an important association with subjects in the age group of 40–59 years more likely to have pain (p = 0.02, OR 1.44). Regarding ergonomic risk factors lifting of load of more than 20 kg (p = 0.04, OR 1.42) and repetitive movements of limbs (p = 0.03, OR 0.67) were significant associations of chronic low back pain. Conclusion. This study identified a significant prevalence of current chronic low back pain among jute mill workers. Regarding ergonomic risk factors the present study has identified two significant associations: lifting of load above 20 kg and repetitive movements of limbs. Therefore, this study has identified need for workplace interventions in this occupational group employing approximately 3,50,000 workers in India. PMID:27563463

Effects of exposure to flour dust on respiratory symptoms and pulmonary function of mill workers

Directory of Open Access Journals (Sweden)

Hamdy A. Mohammadien

2013-10-01

Conclusion: Flour mill workers in Sohag Governorate, like grain workers elsewhere, were at an increased risk of developing pulmonary symptoms, a strong association exists between exposure to flour dust and the prevalence of respiratory symptoms and functional impairments of the lungs. The result has implications for improved dust control measures in the grain industry in Egypt.

Relações granulométricas no processo de brunimento de arroz Granulometry relationship in the rice milling process

Directory of Open Access Journals (Sweden)

Carlos A. S. Luz

2005-04-01

Full Text Available O brunimento é uma das etapas de beneficiamento do arroz que tem grande importância sobre o rendimento de engenho. Neste trabalho, analisaram-se relações granulométricas de frações de grãos na massa de arroz e seus efeitos sobre o rendimento de engenho, durante o processo de brunimento. As amostras usadas foram 78 g de arroz descascado, tendo essas partido de amostras originais de 100 g. Foram testadas cinco relações de composição de amostras a serem brunidas, variando as quantidades de grãos quebrados e de quirera que acompanhavam a massa de grãos inteiros, que foram: 1 somente grãos inteiros; 2 6,16 g de quebrados e 1,04 g de quirera, conforme amostra original; 3 3,60 g de quebrados e 3,60 g de quirera adicionados aos inteiros; 4 7,20 g de quebrados adicionados aos inteiros, e 5 7,20 g de quirera adicionada aos inteiros. Os procedimentos foram executados com uso de engenho de provas e com classificação manual. O rendimento de engenho foi significativamente superior, após a operação de brunimento de arroz, quando existem, na massa a ser brunida, grãos quebrados e quirera, variando entre 3,60 g a 7,20 g e 1,04 g a 7,20 g, respectivamente, comparada ao brunimento da massa composta por 100% de grãos inteiros.Milling yield using five different rates of broken and head rice was tested. The samples were arranged to have different amounts of big and small broken kernels in the mass of grains. The size of each fraction of broken grains was established according to the Brazilian Rules of Rice Classification. The paddy sample had 100 g and the brown rice sample had 78 g. The brown rice was milled by adding different proportions of broken kernels to make five treatments as follows: 1 only whole kernels; 2 6.16 g of big broken kernels and 1.04 g of small broken kernels were used as they appear in the original lot; 3 3.6 g of big broken kernels and 3.6 g of small broken kernels were added to the whole kernels; 4 7.2 g of big broken

Occupational hearing loss of market mill workers in the city of Accra, Ghana

OpenAIRE

Emmanuel D Kitcher; Grace Ocansey; Benjamin Abaidoo; Alidu Atule

2014-01-01

Noise induced hearing loss (NIHL) is an irreversible sensorineural hearing loss associated with exposure to high levels of excessive noise. Prevention measures are not well established in developing countries. This comparative cross sectional study aims to determine the prevalence of hearing loss in both a group of high risk workers and a control group and to assess their knowledge of the effects of noise on hearing health. A total of 101 market mill workers and 103 controls employed within m...

Rice fissure resistance QTLs from ‘Saber’ complement those from ‘Cypress’

Science.gov (United States)

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce grain breakage during the dehusking and milling processes. One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it enters ...

Milling of rice grains: effects of starch/flour structures on gelatinization and pasting properties.

Science.gov (United States)

Hasjim, Jovin; Li, Enpeng; Dhital, Sushil

2013-01-30

Starch gelatinization and flour pasting properties were determined and correlated with four different levels of starch structures in rice flour, i.e. flour particle size, degree of damaged starch granules, whole molecular size, and molecular branching structure. Onset starch-gelatinization temperatures were not significantly different among all flour samples, but peak and conclusion starch-gelatinization temperatures were significantly different and were strongly correlated with the flour particle size, indicating that rice flour with larger particle size has a greater barrier for heat transfer. There were slight differences in the enthalpy of starch gelatinization, which are likely associated with the disruption of crystalline structure in starch granules by the milling processes. Flours with volume-median diameter ≥56 μm did not show a defined peak viscosity in the RVA viscogram, possibly due to the presence of native protein and/or cell-wall structure stabilizing the swollen starch granules against the rupture caused by shear during heating. Furthermore, RVA final viscosity of flour was strongly correlated with the degree of damage to starch granules, suggesting the contribution of granular structure, possibly in swollen form. The results from this study allow the improvement in the manufacture and the selection criteria of rice flour with desirable gelatinization and pasting properties. Copyright © 2012 Elsevier Ltd. All rights reserved.

Radiation protection of workers in the mining and milling of radioactive ores. Code of practice and technical addendum. 1983 ed

International Nuclear Information System (INIS)

1983-01-01

This Code of Practice sets forth the means of ensuring protection against ionizing radiation for workers engaged in mining and milling of radioactive ores: general provisions outlining the responsibilities of the employer and the worker, limits of radiation exposure, administrative organization of radiation protection, radiation surveillance, engineering and administrative protective measures and medical surveillance. It is designed to facilitate the preparation and adoption of national and local regulations and factory rules for radiation protection in mining and milling of radioactive ores.

Economic and accounting evaluation of rice milled production chains in Rio Grande do Sul (Brazil and Uruguay with application of the Policy Analysis Matrix

Directory of Open Access Journals (Sweden)

Ângela Rozane Leal de Souza

Full Text Available ABSTRACT: Rice is the basis of diet for almost half of the world population, and its culture is one of the strategic agroindustrial production chains in the agribusiness environment, in both economic and social levels. Thus, the comparative analysis between the production chains of rice milled in Rio Grande do Sul (RS, Brazil, and Uruguay was mainly motivated by the interest in knowing the differences in the business environment and public policies that impact the competitiveness of this chain in both study regions. Therefore, the objective of this study was to assess the economic efficiency, competitiveness, and effects of public policies of the rice production chain of milled rice in RS (Brazil relative to Uruguay. The data collected in this study are from the 2011-2012 harvests and indicators were calculated by applying the concepts of the policy analysis matrix (PAM. Results showed that the chains in both study regions were competitive under the existing market and policy conditions, revealed comparative advantage, transferred a high load of resources to other sectors of the economy, and satisfactorily remuneration of the domestic production factors. However, the competitiveness and comparative advantage shown in this study were not due to the encouraging intervention policies, as both production systems pay high taxes.

Newly isolated Penicillium oxalicum A592-4B secretes enzymes that degrade milled rice straw with high efficiency.

Science.gov (United States)

Aoyama, Akihisa; Kurane, Ryuichiro; Matsuura, Akira; Nagai, Kazuo

2015-01-01

An enzyme producing micro-organism, which can directly saccharify rice straw that has only been crushed without undergoing the current acid or alkaline pretreatment, was found. From the homology with the ITS, 28S rDNA sequence, the strain named A592-4B was identified as Penicillium oxalicum. Activities of the A592-4B enzymes and commercial enzyme preparations were compared by Novozymes Cellic CTec2 and Genencore GC220. In the present experimental condition, activity of A592-4B enzymes was 2.6 times higher than that of CTec2 for degrading milled rice straw. Furthermore, even when a quarter amount of A592-4B enzyme was applied to the rice straw, the conversion rate was still higher than that by CTec2. By utilizing A592-4B enzymes, improved lignocellulose degradation yields can be achieved without pre-treatment of the substrates; thus, contributing to cost reduction as well as reducing environmental burden.

New market opportunities for rice grains

Science.gov (United States)

Breeding efforts for rice have been focusing on increasing yield and improving quality (milling yield and grain quality), while maintaining cooked rice sensory properties to meet consumer preferences. These breeding targets will no doubt continue as the main foci for the rice industry. However, the ...

21 CFR 137.350 - Enriched rice.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Enriched rice. 137.350 Section 137.350 Food and... Related Products § 137.350 Enriched rice. (a) The foods for which definitions and standards of identity are prescribed by this section are forms of milled rice (except rice coated with talc and glucose and...

Processing Conditions, Rice Properties, Health and Environment

Directory of Open Access Journals (Sweden)

Nobutaka Nakamura

2011-06-01

Full Text Available Rice is the staple food for nearly two-thirds of the world’s population. Food components and environmental load of rice depends on the rice form that is resulted by different processing conditions. Brown rice (BR, germinated brown rice (GBR and partially-milled rice (PMR contains more health beneficial food components compared to the well milled rice (WMR. Although the arsenic concentration in cooked rice depends on the cooking methods, parboiled rice (PBR seems to be relatively prone to arsenic contamination compared to that of untreated rice, if contaminated water is used for parboiling and cooking. A change in consumption patterns from PBR to untreated rice (non-parboiled, and WMR to PMR or BR may conserve about 43–54 million tons of rice and reduce the risk from arsenic contamination in the arsenic prone area. This study also reveals that a change in rice consumption patterns not only supply more food components but also reduces environmental loads. A switch in production and consumption patterns would improve food security where food grains are scarce, and provide more health beneficial food components, may prevent some diseases and ease the burden on the Earth. However, motivation and awareness of the environment and health, and even a nominal incentive may require for a method switching which may help in building a sustainable society.

Hazardous gases and oxygen depletion in a wet paddy pile: an experimental study in a simulating underground rice mill pit, Thailand.

Science.gov (United States)

Yenjai, Pornthip; Chaiear, Naesinee; Charerntanyarak, Lertchai; Boonmee, Mallika

2012-01-01

During the rice harvesting season in Thailand, large amounts of fresh paddy are sent to rice mills immediately after harvesting due to a lack of proper farm storage space. At certain levels of moisture content, rice grains may generate hazardous gases, which can replace oxygen (O(2)) in the confined spaces of underground rice mill pits. This phenomenon has been observed in a fatal accident in Thailand. Our study aimed to investigate the type of gases and their air concentrations emitted from the paddy piles at different levels of moisture content and duration of piling time. Four levels of moisture content in the paddy piles were investigated, including dry paddy group (Gases emitted were measured with an infrared spectrophotometer and a multi-gas detector every 12 h for 5 days throughout the experiment. The results revealed high levels of carbon dioxide (CO(2)) (range 5,864-8,419 ppm) in all wet paddy groups, which gradually increased over time. The concentration of carbon monoxide (CO), methane (CH(4)), nitromethane (CH(3)NO(2)) and nitrous oxide (N(2)O) in all wet paddy groups increased with piling time and with moisture content, with ranges of 11-289; 2-8; 36-374; and 4-26 ppm, respectively. The highest levels of moisture content in the paddy piles were in the range 28-30%wb. Nitrogen dioxide (NO(2)) concentrations were low in all paddy groups. The percentage of O(2) in the wet paddy groups decreased with piling time and moisture content (from 18.7% to 4.1%). This study suggested that hazardous gases could be emitted in moist paddy piles, and their concentrations could increase with increasing moisture content and piling time period.

Dose response effect of cement dust on respiratory muscles competence in cement mill workers.

Science.gov (United States)

Meo, Sultan A; Azeem, Muhammad A; Qureshi, Aijaz A; Ghori, G Moinudin; Al-Drees, Abdul Majeed; Feisal Subhan, Mirza Muhammad

2006-12-01

Electromyography (EMG) of respiratory muscles is a reliable method of assessing the ventilatory muscle function, but still its use has not been fully utilized to determine the occupational and environmental hazards on respiratory muscles. Therefore, EMG of intercostal muscles was performed to determine the dose response effect of cement dust on respiratory muscles competence. Matched cross-sectional study of EMG in 50 non-smoking cement mill workers with an age range of 20 - 60 years, who worked without the benefit of cement dust control ventilation or respiratory protective devices. EMG was performed by using surface electrodes and chart recorder. Significant reduction was observed in number of peaks (p competence and stratification of results shows a dose-effect of years of exposure in cement mill.

Physical and Chemical Properties of Some Selected Rice Varieties

African Journals Online (AJOL)

User

Physical and chemical properties of nine rice varieties grown and processed in Ebonyi .... Therefore, one tonne of a slender variety of rice will need more storage space than the ..... during washing and boiling of milled rice Starch 36:386-390.

Studies on mineral nutrition and safety of wild rice (Oryza L.).

Science.gov (United States)

Jiang, Shuli; Shi, Chunhai; Wu, Jianguo

2009-01-01

Mineral element contents of five wild rice were analyzed, including mineral nutrient elements such as phosphorus (P), potassium (K), calcium (Ca), sodium (Na), magnesium (Mg), iron (Fe), zinc (Zn), copper (Cu), manganese (Mn) and selenium (Se), and the potential toxic elements arsenic (As), mercury (Hg), lead (Pb) and cadmium (Cd). The results showed that the contents of K, Mg, Fe, Zn, Cu, Mn and Se in five wild rice materials were much higher than the cultivate variety Zhou 903 in both brown and milled rice. Wild rice also had lower potential toxic element contents of Hg, Pb and Cd compared with Zhou 903 in brown rice and milled rice, respectively. Among five wild rice samples, WR-3 from Uganda had the highest level of P, K, Ca, Na, Mg, Fe, Zn, Mn and Se, and the lowest contents of Hg, Pb and Cd.

An update on the use of rice in value-added food products.

Science.gov (United States)

Because of the huge quantity of rice produced annually, milled-rice co-products; such as, rice flour, rice bran, rice wax, and rice hull are plentiful and readily available. These co-products could be valuable sources of food ingredients, but they have been vastly under-utilized. This is a report ...

Effect of Interplanting with Zero Tillage and Straw Manure on Rice Growth and Rice Quality

Directory of Open Access Journals (Sweden)

Shi-ping LIU

2007-09-01

Full Text Available The interplanting with zero-tillage of rice, i.e. direct sowing rice 10–20 days before wheat harvesting, and remaining about 30-cm high stubble after cutting wheat or rice with no tillage, is a new cultivation technology in wheat-rice rotation system. To study the effects of interplanting with zero tillage and straw manure on rice growth and quality, an experiment was conducted in a wheat-rotation rotation system. Four treatments, i.e. ZIS (Zero-tillage, straw manure and rice interplanting, ZI (Zero-tillage, no straw manure and rice interplanting, PTS (Plowing tillage, straw manure and rice transplanting, and PT (Plowing tillage, no straw manure and rice transplanting, were used. ZIS reduced plant height, leaf area per plant and the biomass of rice plants, but the biomass accumulation of rice at the late stage was quicker than that under conventional transplanting cultivation. In the first year (2002, there was no significant difference in rice yield among the four treatments. However, rice yield decreased in interplanting with zero-tillage in the second year (2003. Compared with the transplanting treatments, the number of filled grains per panicle decreased but 1000-grain weight increased in interplanting with zero-tillage, which were the main factors resulting in higher yield. Interplanting with zero-tillage improved the milling and appearance qualities of rice. The rates of milled and head rice increased while chalky rice rate and chalkiness decreased in interplanting with zero-tillage. Zero-tillage and interplanting also affected rice nutritional and cooking qualities. In 2002, ZIS showed raised protein content, decreased amylose content, softer gel consistency, resulting in improved rice quality. In 2003, zero-tillage and interplanting decreased protein content and showed similar amylose content as compared with transplanting treatments. Moreover, protein content in PTS was obviously increased in comparison with the other three treatments

Physico-chemical changes in grains of some advance lines/ varieties of rice (oryza sativa l.) after parboiling

International Nuclear Information System (INIS)

Akhter, M.; Haider, Z.

2014-01-01

Some of the advance lines/varieties developed at Rice Research Institute, Kala Shah Kaku, including approved fragrant (Basmati) rice variety i.e., Basmati-2000, were used to assess interactive efficacy of parboiling on these varieties/lines and practical expediency of using standardized parboiling technique for improving nutritional, milling and cooking qualities of these lines/varieties. For this purpose, white milled and parboiled rice samples of ten lines/varieties were analyzed for nutritional quality parameters such as ash, dry matter, crude fat, crude protein, crude fiber, vitamin B6; milling quality parameters such as total milling recovery, head rice recovery, ratio of broken grains and cooking quality parameters such as curling, bursting and cooked grain length. The study showed significant variation in efficacy of parboiling to different varieties/lines. The results clearly showed average increase in mineral contents in terms of ash% increase, dry matter, longer cooked grain length and considerable rise in vitamin B6 contents, higher total milling recovery and head rice recovery in almost all the samples. While crude fiber, crude protein and crude fat decreased non-significantly. Furthermore, quality reducing factors such as number of broken grains, bursting and curling percentage of cooked rice were also reduced significantly in parboiled samples. It may, therefore, be suggested that parboiling offers a better alternative to conserve and increase nutritional, milling and cooking quality values of rice varieties/lines. Less percentage of broken, burst and curled grains may result in augmented net income. (author)

Effects of soaking and acidification on physicochemical properties of calcium-fortified rice.

Science.gov (United States)

Sirisoontaralak, Porntip; Limboon, Pailin; Jatuwong, Sujitra; Chavanalikit, Arusa

2016-06-01

Calcium-fortified rice was prepared by soaking milled rice in calcium lactate solution, steaming and drying, and physicochemical properties were determined to evaluate effects of calcium concentration (0, 30, 50 g L(-1) ), soaking temperature (ambient temperature, 40 °C, 60 °C) and acidification. Calcium-fortified rice had less lightness. More total solid loss was observed, especially at high soaking temperature. Harder texture was detected with increased calcium concentration. Calcium fortification lowered pasting viscosity of milled rice. Panelists accepted all fortified rice; however, only rice soaked at 50 g L(-1) concentration could be claimed as a good source of calcium. Increasing of soaking temperature induced more penetration of calcium to rice kernels but calcium was lost more easily after washing. With addition of acetic acid to the soaking solution, enriched calcium content was comparable to that of high soaking temperature but with better retention after washing and calcium solubility was improved. Acid induced reduction of lightness and cooked rice hardness but increased total solid loss and pasting viscosity. Although the taste of acetic acid remained, panelists still accepted the fortified rice. Calcium-fortified rice (190.47-194.3 mg 100 g(-1) ) could be successfully produced by soaking milled rice in 50 g L(-1) calcium lactate solution at 40 °C or at ambient temperature with acidification. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Rice mill wastewater treatment in microbial fuel cells fabricated using proton exchange membrane and earthen pot at different pH.

Science.gov (United States)

Behera, Manaswini; Jana, Partha S; More, Tanaji T; Ghangrekar, M M

2010-10-01

Performance of microbial fuel cells (MFCs), fabricated using an earthen pot (MFC-1) and a proton exchange membrane (MFC-2), was evaluated while treating rice mill wastewater at feed pH of 8.0, 7.0 and 6.0. A third MFC (MFC-3), fabricated using a proton exchange membrane (PEM), was operated as control without pH adjustment of the acidic raw wastewater. Maximum chemical oxygen demand (COD) removal efficiencies of 96.5% and 92.6% were obtained in MFC-1 and MFC-2, respectively, at feed pH of 8.0. MFC-3 showed maximum COD removal of 87%. The lignin removal was 84%, 79%, and 77% and the phenol removal was 81%, 77%, and 76% in MFC-1, MFC-2, and MFC-3, respectively. Maximum sustainable volumetric power was obtained at feed pH of 8.0, and it was 2.3 W/m(3) and 0.53 W/m(3), with 100 ohm external resistance, in MFC-1 and MFC-2, respectively. The power was lower at lower feed pH. MFC-3 generated lowest volumetric power (0.27 W/m(3)) as compared to MFC-1 and MFC-2. More effective treatment of rice mill wastewater and higher energy recovery was demonstrated by earthen pot MFC as compared to MFC incorporated with PEM. 2010 Elsevier B.V. All rights reserved.

An overview of global rice production, supply, trade, and consumption.

Science.gov (United States)

Muthayya, Sumithra; Sugimoto, Jonathan D; Montgomery, Scott; Maberly, Glen F

2014-09-01

Rice is the staple food for over half the world's population. Approximately 480 million metric tons of milled rice is produced annually. China and India alone account for ∼50% of the rice grown and consumed. Rice provides up to 50% of the dietary caloric supply for millions living in poverty in Asia and is, therefore, critical for food security. It is becoming an important food staple in both Latin America and Africa. Record increases in rice production have been observed since the start of the Green Revolution. However, rice remains one of the most protected food commodities in world trade. Rice is a poor source of vitamins and minerals, and losses occur during the milling process. Populations that subsist on rice are at high risk of vitamin and mineral deficiency. Improved technologies to fortify rice have the potential to address these deficiencies and their associated adverse health effects. With the rice industry consolidating in many countries, there are opportunities to fortify a significant share of rice for distribution or for use in government safety net programs that target those most in need, especially women and children. Multisectoral approaches are needed for the promotion and implementation of rice fortification in countries. © 2014 New York Academy of Sciences.

Work-related allergy and asthma in spice mill workers - The impact of processing dried spices on IgE reactivity patterns.

Science.gov (United States)

van der Walt, Anita; Lopata, Andreas L; Nieuwenhuizen, Natalie E; Jeebhay, Mohamed F

2010-01-01

Three spice mill workers developed work-related allergy and asthma after prolonged exposure to high levels (>10 mg/m(3)) of inhalable spice dust. Patterns of sensitization to a variety of spices and putative allergens were identified. Work-related allergy and asthma were assessed on history, clinical evaluation, pulmonary function and fractional exhaled nitric oxide. Specific IgE reactivity to a range of common inhalant, food and spice allergens was evaluated using ImmunoCAP and allergen microarray. The presence of non-IgE-mediated reactions was determined by basophil stimulation (CAST-ELISA). Specific allergens were identified by immunoblotting to extracts of raw and dried processed garlic, onion and chili pepper. Asthma was confirmed in all 3 subjects, with work-related patterns prominent in worker 1 and 3. Sensitization to multiple spices and pollen was observed in both atopic workers 1 and 2, whereas garlic and chili pepper sensitization featured in all 3 workers. Microarray analysis demonstrated prominent profilin reactivity in atopic worker 2. Immunoblotting demonstrated a 50-kDa cross-reactive allergen in garlic and onion, and allergens of approximately 40 and 52 kDa in chili pepper. Dry powdered garlic and onion demonstrated greater IgE binding. This study demonstrated IgE reactivity to multiple spice allergens in workers exposed to high levels of inhalable spice dust. Processed garlic and onion powder demonstrated stronger IgE reactivity than the raw plant. Atopy and polysensitization to various plant profilins, suggesting pollen-food syndrome, represent additional risk factors for sensitizer-induced work-related asthma in spice mill workers. 2010 S. Karger AG, Basel.

Variation in Yield and Physicochemical Quality Traits among Mutants of Japonica Rice Cultivar Wuyujing 3

OpenAIRE

Abacar, Jose Daniel; Zhao-miao, Lin; Xin-cheng, Zhang; Cheng-qiang, Ding; She, Tang; Zheng-hui, Liu; Shao-hua, Wang; Yan-feng, Ding

2016-01-01

To select elite germplasms, 112 mutants derived from japonica rice cultivar Wuyujing 3 were evaluated. The yield components such as panicle number per square meter, grain number per panicle, and grain weight were measured. The quality traits such as percentage of chalky grains (PCG), brown rice yield (BRY), milled rice yield (MRY), degree of milling (DM), amylose content (AC), protein content (PC), and relationships among traits were inverstigated. Results showed that grain yield ranged from ...

77 FR 44678 - Kimberly-Clark Worldwide, Inc., a Subsidiary of Kimberly-Clark Corporation, Everett Mill...

Science.gov (United States)

2012-07-30

..., Inc.,a Subsidiary of Kimberly-Clark Corporation,Everett Mill,Including On-Site Leased Workers From... workers of Kimberly-Clark Worldwide, Inc., a subsidiary of Kimberly-Clark Corporation, Everett Mill... Kimberly-Clark Corporation, Everett Mill. The Department has determined that these workers were...

Super-fine rice-flour production by enzymatic treatment with high hydrostatic pressure processing

Science.gov (United States)

Kido, Miyuki; Kobayashi, Kaneto; Chino, Shuji; Nishiwaki, Toshikazu; Homma, Noriyuki; Hayashi, Mayumi; Yamamoto, Kazutaka; Shigematsu, Toru

2013-06-01

In response to the recent expansion of rice-flour use, we established a new rice-flour manufacturing process through the application of high hydrostatic pressure (HP) to the enzyme-treated milling method. HP improved both the activity of pectinase, which is used in the enzyme-treated milling method and the water absorption capacity of rice grains. These results indicate improved damage to the tissue structures of rice grains. In contrast, HP suppressed the increase in glucose, which may have led to less starch damage. The manufacturing process was optimized to HP treatment at 200 MPa (40°C) for 1 h and subsequent wet-pulverization at 11,000 rpm. Using this process, rice flour with an exclusively fine mean particle size less than 20 μm and starch damage less than 5% was obtained from rice grains soaked in an enzyme solution and distilled water. This super-fine rice flour is suitable for bread, pasta, noodles and Western-style sweets.

Using Check-All-That-Apply (CATA) method for determining product temperature-dependent sensory-attribute variations: A case study of cooked rice.

Science.gov (United States)

Pramudya, Ragita C; Seo, Han-Seok

2018-03-01

Temperatures of most hot or cold meal items change over the period of consumption, possibly influencing sensory perception of those items. Unlike temporal variations in sensory attributes, product temperature-induced variations have not received much attention. Using a Check-All-That-Apply (CATA) method, this study aimed to characterize variations in sensory attributes over a wide range of temperatures at which hot or cold foods and beverages may be consumed. Cooked milled rice, typically consumed at temperatures between 70 and 30°C in many rice-eating countries, was used as a target sample in this study. Two brands of long-grain milled rice were cooked and randomly presented at 70, 60, 50, 40, and 30°C. Thirty-five CATA terms for cooked milled rice were generated. Eighty-eight untrained panelists were asked to quickly select all the CATA terms that they considered appropriate to characterize sensory attributes of cooked rice samples presented at each temperature. Proportions of selection by panelists for 13 attributes significantly differed among the five temperature conditions. "Product temperature-dependent sensory-attribute variations" differed with two brands of milled rice grains. Such variations in sensory attributes, resulted from both product temperature and rice brand, were more pronounced among panelists who more frequently consumed rice. In conclusion, the CATA method can be useful for characterizing "product temperature-dependent sensory attribute variations" in cooked milled-rice samples. Further study is needed to examine whether the CATA method is also effective in capturing "product temperature-dependent sensory-attribute variations" in other hot or cold foods and beverages. Published by Elsevier Ltd.

Uji Alat Penggiling Tipe Flat Burr Mill pada Komoditas Beras, Ketan Putih dan Ketan Hitam

OpenAIRE

Rahmadan, Endra

2014-01-01

Changing the form of rice, white sticky rice and black sticky rice into flour is one way to increase the sale value or economic value of the material, in which rice flour, white sticky rice flour and black sticky rice flour are widely used as a raw material in the manufacture of foodstuffs. This study was a test of flat burr mill grinder on the commodity of rice, white sticky rice and black sticky rice. The study was conducted with literature study, experiment, observation and testing of equi...

Rice Bran Stabilization And G-Oryzanol Content Of Two Local Paddy Varieties Ir 64 And Cisadane Muncul

Directory of Open Access Journals (Sweden)

Evy Damayanthi

2001-04-01

Full Text Available An autoclaving procedure was developed to produce stable rice bran from two local paddy varieties IR 64 and Cisadane Muncul. The stable rice bran showed no significant increase in free fatty acid content for 144 hours at 37oC. In the optimum wet heating process, rice bran was heated at 121oC and held for 3 minutes before cooling for both varieties. Stable rice bran contained 3.8 % moisture and the content of total tocopherol was not much changed by heating process, i.e., 209.8 mg/100 g rice bran oil and 279.8 for control (without heating process of IR 64 variety and 227.4 mg/100 g rice bran oil and 248.8 for control of Cisadane Muncul variety, respectively. The content of g-oryzanol varied and was depended on the degree of milling ranged from 39.1 to 147.7 mg/100 g rice bran oil for both of IR 64 and Cisadane Muncul rice varieties. The content of soluble dietary fiber varied and was depended on the degree of milling which ranged from 3.56 to 8.76 % for both of IR 64 and Cisadane Muncul rice varieties. The content of insoluble dietary fiber varied and was depended on the degree of milling which ranged from 15.00 to 25.38 % for both of IR 64 and Cisadane Muncul rice varieties.

Energy utilization and environmental aspects of rice processing industries in Bangladesh

International Nuclear Information System (INIS)

Ahiduzzaman, M.; Sadrul Islam, A. K. L.

2009-01-01

In this study, the energy utilization and environmental aspects of the rice processing industries in Bangladesh was analyzed. Rice husk, a milling by-product of rice, is used as a source of thermal energy to produce steam for parboiling of raw rice. The rice is mostly dried on a concrete floor under the sunshine. In mechanical drying, rice husks are used as a source of primary energy. In Bangladesh, the annual estimated energy used in 2000 for the drying of rice by sunshine was 10.7 million GJ and for drying and parboiling by rice husks it was 48.2 million GJ. These amounts will increase to 20.5 and 92.5 million GJ in 2030, respectively. Electrical energy consumption for mechanical drying and milling of rice was calculated as 1.83 million GJ e and 3.51 million GJ e in 2000 and in 2030, respectively... Biogenic carbon dioxide emission from burning of rice husk is renewed every year by the rice plant. Both the biogenic and non-biogenic carbon dioxide emissions in 2000 were calculated as 5.7 and 0.4 million tonnes, respectively, which will increase to 10.9 and 0.7 million tonnes in 2030. The demand of energy for rice processing increases every year, therefore, energy conservation in rice processing industries would be a viable option to reduce the intensity of energy by increasing the efficiency of rice processing systems which leads to a reduction in emissions and an increased supply of rice husk energy to other sectors as well. (author)

Energy Utilization and Environmental Aspects of Rice Processing Industries in Bangladesh

Directory of Open Access Journals (Sweden)

Mohammed Ahiduzzaman

2009-03-01

Full Text Available In this study, the energy utilization and environmental aspects of the rice processing industries in Bangladesh was analyzed. Rice husk, a milling by-product of rice, is used as a source of thermal energy to produce steam for parboiling of raw rice. The rice is mostly dried on a concrete floor under the sunshine. In mechanical drying, rice husks are used as a source of primary energy. In Bangladesh, the annual estimated energy used in 2000 for the drying of rice by sunshine was 10.7 million GJ and for drying and parboiling by rice husks it was 48.2 million GJ. These amounts will increase to 20.5 and 92.5 million GJ in 2030, respectively. Electrical energy consumption for mechanical drying and milling of rice was calculated as 1.83 million GJe and 3.51 million GJe in 2000 and in 2030, respectively. Biogenic carbon dioxide emission from burning of rice husk is renewed every year by the rice plant. Both the biogenic and non-biogenic carbon dioxide emissions in 2000 were calculated as 5.7 and 0.4 million tonnes, respectively, which will increase to 10.9 and 0.7 million tonnes in 2030. The demand of energy for rice processing increases every year, therefore, energy conservation in rice processing industries would be a viable option to reduce the intensity of energy by increasing the efficiency of rice processing systems which leads to a reduction in emissions and an increased supply of rice husk energy to other sectors as well.

Energy utilization and environmental aspects of rice processing industries in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Ahiduzzaman, M. [Farm Machinery and Postharvest Technology Division, Bangladesh Rice Research Institute, Gazipur-1701 (Bangladesh); Sadrul Islam, A. K. L. [Department of Mechanical and Chemical Engineering, Islamic University of Technology, Organization of the Islamic Conference (OIC), Board Bazar, Gazipur-1704 (Bangladesh)

2009-07-01

In this study, the energy utilization and environmental aspects of the rice processing industries in Bangladesh was analyzed. Rice husk, a milling by-product of rice, is used as a source of thermal energy to produce steam for parboiling of raw rice. The rice is mostly dried on a concrete floor under the sunshine. In mechanical drying, rice husks are used as a source of primary energy. In Bangladesh, the annual estimated energy used in 2000 for the drying of rice by sunshine was 10.7 million GJ and for drying and parboiling by rice husks it was 48.2 million GJ. These amounts will increase to 20.5 and 92.5 million GJ in 2030, respectively. Electrical energy consumption for mechanical drying and milling of rice was calculated as 1.83 million GJ{sub e} and 3.51 million GJ{sub e} in 2000 and in 2030, respectively... Biogenic carbon dioxide emission from burning of rice husk is renewed every year by the rice plant. Both the biogenic and non-biogenic carbon dioxide emissions in 2000 were calculated as 5.7 and 0.4 million tonnes, respectively, which will increase to 10.9 and 0.7 million tonnes in 2030. The demand of energy for rice processing increases every year, therefore, energy conservation in rice processing industries would be a viable option to reduce the intensity of energy by increasing the efficiency of rice processing systems which leads to a reduction in emissions and an increased supply of rice husk energy to other sectors as well. (author)

Testing and evaluation of existing techniques for identifying uptakes and measuring retention of uranium in mill workers

International Nuclear Information System (INIS)

1983-03-01

Preliminary tests and evaluations of existing bio-analytical techniques for identifying uptakes and measuring retention of uranium in mill workers were made at two uranium mills. Urinalysis tests were found to be more reliable indicators of uranium uptakes than personal air sampling. Static air samples were not found to be good indicators of personal uptakes. In vivo measurements of uranium in lung were successfully carried out in the presence of high and fluctuating background radiation. Interference from external contamination was common during end of shift measurements. A full scale study to evaluate model parameters for the uptake, retention and elimination of uranium should include, in addition to the above techniques, particle size determination of airborne uranium, solubility in simulated lung fluid, uranium analysis in faeces and bone and minute volume measurements for each subject

Effect of gamma irradiation on rice and its food products

International Nuclear Information System (INIS)

Sung, W.-C.

2005-01-01

Two milled indica rice varieties were exposed to gamma radiation with doses ranging from 0 to 1.0 kGy. The effects of gamma irradiation on rice flour pasting properties and the qualities of its food product, rice curd, were compared to the effects of storage. A dose of 1 kGy can decrease the flour paste viscosity and tenderize the texture of the rice curd to similar levels as those obtained after 12 months of storage. It was thus shown that gamma irradiation could shorten the indica rice aging time and improve the processing stability and quality of rice products

Effect of gamma irradiation on rice and its food products

Energy Technology Data Exchange (ETDEWEB)

Sung, W.-C. [Department of Hotel and Restaurant Management, Chia Nan University of Pharmacy and Science, 60 Erh-Jen Road, Sec. 1, Pao-An, Jen-Te Hsiang, Tainan 717, Taiwan (China)]. E-mail: sungwilliam2001@yahoo.com.tw

2005-07-01

Two milled indica rice varieties were exposed to gamma radiation with doses ranging from 0 to 1.0 kGy. The effects of gamma irradiation on rice flour pasting properties and the qualities of its food product, rice curd, were compared to the effects of storage. A dose of 1 kGy can decrease the flour paste viscosity and tenderize the texture of the rice curd to similar levels as those obtained after 12 months of storage. It was thus shown that gamma irradiation could shorten the indica rice aging time and improve the processing stability and quality of rice products.

Review on Parameters Influencing the Rice Breakage and Rubber Roll Wear in Sheller

Directory of Open Access Journals (Sweden)

Prabhakaran P.

2017-09-01

Full Text Available The present review deals with parameters influencing the rice breakage during rice milling operations and the effect of rubber roll Sheller in rice husk removal process. The main objective of rice milling system is to remove the husk and bran layer to produce the white rice. In this process, rubber roll sheller is used to remove husk from the grains by friction process. If the rubber material is too soft, there may not be sufficient shear force to husk the paddy. Wear will be minimum for rubber material with high hardness but indeed it pronounce the breakage of rice. Hence, for efficient husking the rubber roll material should possess the balance of physico-mechanical properties. Rice breakage depends on several other parameters like the type of harvest, drying temperature, drying methods, physical characteristics of paddy, husking characteristics, paddy moisture content, rubber roller speed, rubber roll pressure, paddy feed rate and fissures. Rubber roll wear depends on the type of rubber material attached to the roller, feed rate, roller speed, pressure etc.

Technological, physicochemical and sensory changes of upland rice in soaking step of the parboiling process

Directory of Open Access Journals (Sweden)

Flávia de Araújo Fonseca

2014-09-01

Full Text Available The aim of this study was to evaluate the effect of combinations of soaking temperature and time during the parboiling on the technological, physicochemical and sensory quality of two upland rice cultivars. The milling degree for BRS Primavera and BRS Sertaneja cultivars ranged from 7.11 to 8.89 g100 g-1 and 7.62 to 8.91 g 100 g-1and the head yield from 63.77 to 69.26 g 100 g-1 and from 73.22 to 75.40 g 100 g-1, respectively. The ash content for parboiled BRS Sertaneja increased up to 68%; regarding protein, the content increased up to 10% and for lipids, the values increased up to 86%, approximately, after processing. The higher the soaking temperature, the lower the milling degree and head yield. The parboiled rice BRS Primavera achieved higher contents of ash and lipid in relation to non-parboiled milled rice, while the BRS Sertaneja obtained higher ash, protein, lipid, and crude fiber contents. Parboiled rice samples had higher yield and cooking time than milled rice samples. The condition of soaking at 65°C for 60 min. and 60oC for 112 min. was sufficient for the acceptance of all sensory attributes evaluated in BRS Primavera, and 65oC for 420 min. in BRS Sertaneja.

77 FR 8279 - Kimberly-Clark Worldwide, Inc., a Subsidiary of Kimberly-Clark Corporation, Everett Mill...

Science.gov (United States)

2012-02-14

..., Inc., a Subsidiary of Kimberly-Clark Corporation, Everett Mill, Including On-Site Leased Workers From...-Clark Worldwide, Inc., a subsidiary of Kimberly-Clark Corporation, Everett Mill, including on-site... subsidiary of Kimberly- Clark Corporation, Everett Mill. The Department has determined that these workers...

Assessment of the quality of bran and bran oil produced from some Egyptian rice varieties.

Science.gov (United States)

Salem, Eglal G; El Hissewy, Ahmed; Agamy, Neveen F; Abd El Barry, Doaa

2014-04-01

Rice (Oryza sativa L.) is one of the leading food crops of the world, the staple food of over half the world's population. The bran, which is an important byproduct obtained during rice milling, constitutes about 1/10 of the weight of the rice grain. Rice bran is the outer brown layer including the rice germ that is removed during the milling process of brown grain. This milling byproduct is reported to be high in natural vitamins and minerals, particularly vitamin E. The present study was conducted to determine the chemical composition of bran and bran oil of 13 different rice varieties commonly produced in Egypt, to study the utilization of rice bran in bread production, and to assess the quality and acceptance of the rice bran edible oil produced. Rice bran was produced from 13 Egyptian varieties of recently harvested rice as well as from paddy rice stored for 1 year. The extracted bran was immediately stabilized then subjected to chemical analysis (such as moisture content, protein, fat, carbohydrates, fiber, and ash) as well as trace and heavy metals determination (P, K, Na, Ca, Fe, Zn, Cu, and Mg). Bread was produced by adding Giza172 rice bran at three different concentrations to wheat flour then subjected to chemical analysis, caloric content, and organoleptic examination. Bran oil was extracted from the different varieties of rice bran (recently harvested and stored) then subjected to chemical and organoleptic examinations as well as vitamin E and oryzanol determination. The percentage of rice bran of newly harvested Egyptian rice was 11.68% and was 10.97% in stored rice. The analysis showed mean values of 5.91 and 5.53% for moisture, 14.60 and 14.40% for crude protein, 14.83 and 15.20% for fat, 44.77 and 45.40% for carbohydrates, 6.55 and 7.06% for crude fiber, and 8.87 and 8.50% for ash for newly harvested and stored rice bran, respectively. Bread containing 15% rice bran showed the highest score percentages for organoleptic quality compared with the

The quiet revolution in Asia's rice value chains.

Science.gov (United States)

Reardon, Thomas; Chen, Kevin Z; Minten, Bart; Adriano, Lourdes; Dao, The Anh; Wang, Jianying; Gupta, Sunipa Das

2014-12-01

There is a rapid transformation afoot in the rice value chain in Asia. The upstream is changing quickly-farmers are undertaking capital-led intensification and participating in burgeoning markets for land rental, fertilizer and pesticides, irrigation water, and seed, and shifting from subsistence to small commercialized farms; in some areas landholdings are concentrating. Midstream, in wholesale and milling, there is a quiet revolution underway, with thousands of entrepreneurs investing in equipment, increasing scale, diversifying into higher quality, and the segments are undergoing consolidation and vertical coordination and integration. Mills, especially in China, are packaging and branding, and building agent networks in wholesale markets, and large mills are building direct relationships with supermarkets. The downstream retail segment is undergoing a "supermarket revolution," again with the lead in change in China. In most cases the government is not playing a direct role in the market, but enabling this transformation through infrastructural investment. The transformation appears to be improving food security for cities by reducing margins, offering lower consumer rice prices, and increasing quality and diversity of rice. This paper discusses findings derived from unique stacked surveys of all value chain segments in seven zones, more and less developed, around Bangladesh, China, India, and Vietnam. © 2014 New York Academy of Sciences.

Practitioner Profile: An Interview With Amanda Mills

Directory of Open Access Journals (Sweden)

Amanda Mills

2012-01-01

Full Text Available For more than 25 years, Amanda Mills has been working with arts organizations across Canada and with artists of all kinds to assist them in achieving financial sanity. She has taught business management at the University of Victoria and has prepared thousands of tax returns for writers, visual artists, choreographers, actors, filmmakers, broadcasters, and creative entrepreneurs. Ten years ago, bringing together her work on trauma, with twenty years of business management, Mills founded Loose Change Financial Therapy – the place where money and feelings meet. Mills has presented Loose Change workshops for social workers, teachers, psychotherapists, artists, anti-poverty activists, sex trade workers, women’s groups, and the general public.  She has been a guest on major Canadian radio and television broadcasts and profiled in many major Canadian newspapers and periodicals. Mills is also a crisis counselor and co-wrote a bestselling book on recovering from trauma. A tax professional and business manager, she is certified as a financial counselor under the Bankruptcy and Insolvency Act. Mills is also currently completing a certificate in mediation.

Correlation analysis of first phase monitoring results for uranium mill workers

International Nuclear Information System (INIS)

Davis, M.W.

1983-05-01

This report describes the determination of the existence and extent of correlations in data obtained during the first phase study of urinalysis, personal air sampling and lung burden measurements of uranium mill workers. It was shown that uranium excretions in urine as determined from spot urine samples at the end of the shift were correlated with intakes calculated from personal air sampling data at the 90 percent confidence level. When there are large variations in the rate of urine production, the time rate or uranium elimination was shown to be a more reliable indicator of uranium excretion than the uranium concentration in urine. Based on correlations between phantom and subject lung burden measurements in the presence of changing background radiation levels, a comparative lung burden measurement technique was developed. The sensitivity and accuracy of the method represent a significant improvement and the method is as applicable to females as to males

Production of surfactin from rice mill polishing residue by submerged fermentation using Bacillus subtilis MTCC 2423.

Science.gov (United States)

Gurjar, Jigar; Sengupta, Bina

2015-08-01

Rice mill polishing residue (RMPR), an abundant and cheap agro residue, was used as substrate for microbial growth of Bacillus subtilis MTCC 2423 by submerged fermentation process to produce surfactin. Nutrients present in the residue were sufficient to sustain the growth of the microorganism. Multi stage foam fractionation followed by acid precipitation was used to concentrate and recover the product. Recoverable yield of surfactin was 4.17 g/kg residue. Product recovered in the foamate accounted for 69% of the total yield. The residual broth containing ∼ 30% surfactin exhibited biological oxygen demand and chemical oxygen demand values of 23 and 69 mg/L respectively. The microbial growth data was correlated using three parameter sigmoid models. Surfactin synthesized had a predominance of molecular weight 1076 Da. Foam separation of copper using surfactin resulted in a maximum removal of 72.5%. Copyright © 2015 Elsevier Ltd. All rights reserved.

Health physics program for the Edgemont Uranium Mill decommissioning project

International Nuclear Information System (INIS)

Polehn, J.L.; Wallace, R.G.; Reed, R.P.; Wilson, G.T.

1986-01-01

The Tennessee Valley Authority (TVA) is actively involved in decommissioning a uranium mill located near the town of Edgemont, South Dakota. The Edgemont Mill Decommissioning Project, which is unique in many respects, will involve dismantlement of the old inactive mill building and excavation and transportation of several million tons of uranium mill tailings to a permanent disposal site. To ensure that workers are adequately protected from radiation exposure during decommissioning operations, a health physics program appropriate for the decommissioning situation was developed. The Edgemont Mill Decommissioning Project Health Physics Manual (HPM) gives the programmatic requirements for worker radiation protection. The requirements of the HPM are implemented by means of detailed onsite operating procedures. The Edgemont project health physics program was developed using currently available regulations and guidance for an operating uranium mill with appropriate modifications for decommissioning. This paper discusses the development, implementation, and documentation of that program

Studies on development of new functional natural materials from agricultural products - Technology developments for ceramic powders and materials from rice phytoliths

Energy Technology Data Exchange (ETDEWEB)

Kang, Dae Kap; Kim, Yong Ik [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Yoon, Nang Kyu; Seong, Seo Yong [Myongseong Ceramics Com., Taejon (Korea, Republic of); Ryu, Sang Eun [Bae Jae Univ., Taejon (Korea, Republic of); Lee, Jae Chun [Myungji Univ., Seoul (Korea, Republic of)

1995-08-01

Based on an estimation of annual rice production of 5.2 million tons, rice husks by-production reaches to 1.17 million tons per year in Korea. Distinguished to other corns, rice contains a lot of Si; 10-20% by weight in rice husks calculated as silica. The aim of this research project is to develop technologies for ceramic powders and materials utilizing the silica in rice husks called phytoliths. In this first year research, researches of the following subjects were performed; material properties of rice husks, milling of rice husks, acid treatments, oxidations at low and high temperatures, sintering and crystalization of amorphous silica, low temperature carburization, formation of silicon carbide whiskers, and brick lightening method using milled rice husks. 11 tabs., 49 figs., 75 refs. (Author).

Studies on the Ecological Adaptability of Growing Rice with Floating Bed on the Dilute Biogas Slurry

Science.gov (United States)

Du, Qi; Cheng, Bowen; Liao, Zhiqi; Sun, Chengcheng

2016-01-01

This study aimed to explore the ecological adaptability and the possibility of growing rice with floating bed on the dilute biogas slurry. The results of the experiments show that the growth stage, rice plant height, and rice yield and quality were significantly affected by multiple dilutions; rice plants cultivated with 45 multiple dilutions had better ecological adaptability than others. In the 45 multiple dilutions' group, the yield of rice was 13.3 g/bucket (8 rice plants), milled rice rate was 63.1%, and the content of crude protein in the rice was 6.3%. The concentrations of heavy metals in the rice cultivated with 30 multiple dilutions' slurry, such as total lead, cadmium, mercury, chromium, and arsenic, were all below the national standard. The study shows that it is possible and safe to cultivate rice plants with no soil but diluted biogas slurry. In the experiments, the yield, milled rice rate, and crude protein of the rice cultivated with slurry were not as much as those of rice cultivated with regular way in soil. This study provides the basic theoretical support for the development of biogas projects and the potential achievement of organic farming in special agricultural facilities and circular economy. PMID:27882324

Studies on the Ecological Adaptability of Growing Rice with Floating Bed on the Dilute Biogas Slurry.

Science.gov (United States)

Kang, Qun; Li, Rui; Du, Qi; Cheng, Bowen; Liao, Zhiqi; Sun, Chengcheng; Li, Zhaohua

2016-01-01

This study aimed to explore the ecological adaptability and the possibility of growing rice with floating bed on the dilute biogas slurry. The results of the experiments show that the growth stage, rice plant height, and rice yield and quality were significantly affected by multiple dilutions; rice plants cultivated with 45 multiple dilutions had better ecological adaptability than others. In the 45 multiple dilutions' group, the yield of rice was 13.3 g/bucket (8 rice plants), milled rice rate was 63.1%, and the content of crude protein in the rice was 6.3%. The concentrations of heavy metals in the rice cultivated with 30 multiple dilutions' slurry, such as total lead, cadmium, mercury, chromium, and arsenic, were all below the national standard. The study shows that it is possible and safe to cultivate rice plants with no soil but diluted biogas slurry. In the experiments, the yield, milled rice rate, and crude protein of the rice cultivated with slurry were not as much as those of rice cultivated with regular way in soil. This study provides the basic theoretical support for the development of biogas projects and the potential achievement of organic farming in special agricultural facilities and circular economy.

Assessment and genetic analysis of heavy metal content in rice grain using an Oryza sativa × O. rufipogon backcross inbred line population.

Science.gov (United States)

Huang, De-Run; Fan, Ye-Yang; Hu, Biao-Lin; Xiao, Ye-Qing; Chen, Da-Zhou; Zhuang, Jie-Yun

2018-03-01

Heavy metal accumulation in rice is a growing concern for public health. Backcross inbred lines derived from an interspecific cross of Oryza sativa × O. rufipogon were grown in two distinct ecological locations (Hangzhou and Lingshui, China). The objective of this study was to characterise the contents of heavy metal in rice grains, and to identify quantitative trait loci (QTLs) for heavy metal contents. The contents of Ni, As, Pb, Cr and Hg in milled rice showed a significant decline as compared with those in brown rice, whereas the content of Cd showed little change. The concentration of heavy metal in rice grain varied greatly between the two environments. A total of 24 QTLs responsible for heavy metal contents were detected, including two for both the brown and milled rice, 13 for brown rice only, and nine for milled rice only. All the QTLs except two had the enhancing alleles derived from O. rufipogon. Sixteen QTLs were clustered in six chromosomal regions. Environmental variation plays an important role in the heavy metal contents in rice grain. QTLs detected in this study might be useful for breeding rice varieties with low heavy metal content. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Bioassay for uranium mill tailings

International Nuclear Information System (INIS)

Tschaeche, A.N.

1986-01-01

Uranium mill tailings are composed of fine sand that contains, among other things, some uranium (U/sup 238/ primarily), and all of the uranium daughters starting with /sup 230/Th that are left behind after the usable uranium is removed in the milling process. Millions of pounds of tailings are and continue to be generated at uranium mills around the United States. Discrete uranium mill tailings piles exist near the mills. In addition, the tailings materials were used in communities situated near mill sites for such purposes as building materials, foundations for buildings, pipe runs, sand boxes, gardens, etc. The Uranium Mill Tailings Remedial Action Project (UMTRAP) is a U.S. Department of Energy Program designed with the intention of removing or stabilizing the mill tailings piles and the tailings used to communities so that individuals are not exposed above the EPA limits established for such tailings materials. This paper discusses the bioassay programs that are established for workers who remove tailings from the communities in which they are placed

75 FR 39051 - Desoto Mills LLC, Fort Payne, AL; Notice of Negative Determination Regarding Application for...

Science.gov (United States)

2010-07-07

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,416] Desoto Mills LLC, Fort... applicable to workers and former workers at Desoto Mills, LLC, a Subsidiary of Fruit of the Loom, Fort Payne... * * * locations outside the Desoto Mills Plant.'' The petitioner compares the situation at this location with...

Radiological health aspects of uranium milling

International Nuclear Information System (INIS)

Fisher, D.R.; Stoetzel, G.A.

1983-05-01

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized

Radiological health aspects of uranium milling

Energy Technology Data Exchange (ETDEWEB)

Fisher, D.R.; Stoetzel, G.A.

1983-05-01

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized.

Study on work load and work-related musculoskeletal disorders amongst male jute mill workers of West Bengal, India.

Science.gov (United States)

Sett, Moumita; Sahu, Subhashis

2012-01-01

Work-related problems, many of which could be prevented with proper ergonomic techniques are particularly common in developing countries. The aim of this study was to evaluate the work stress and the development of the work-related musculoskeletal disorders (WRMSDs) of workers employed in the jute mills of India. About 219 male workers engaged in different departments of three jute industries in 24-Parganas (North) and Hooghly districts of West Bengal, India volunteered for this study. Questionnaires along with direct observation of work postures were conducted. Physical parameters such as body weight, height; physiological parameters like heart rate response, blood pressure and psycho-physiological parameters such as perceived exertion rating were studied during different tasks performed by them. It was observed that the 'hacklers' are mostly stressed. Analyses of working postures (OWAS) suggested that their adopted awkward postures were very stressful. A large number of hacklers (92.5% suffer from intense pain in different body parts as compared to workers in other departments of the jute industries. Workers report that the pain even lasts many hours after work. Since most of the workers perform repetitive tasks, so both the workplace as well as the work-rest schedule must be reorganized.

Radiation health and safety aspects in uranium milling

International Nuclear Information System (INIS)

Smart, B.C.

1982-01-01

This presentation deals mainly with radiation levels associated with the uranium milling operations, including yellowcake production. The regulation of uranium mills has not received much attention in the past because radiation levels have been generally low, and uranium milling has been substantially free of occupational illness. More attention is being directed towards minimizing exposures, and the Canadian Atomic Energy Control Board is working on new regulations which will reflect the recommendations of various hearings and the International Commission on Radiological Protection. Emphasis is now being placed on improving monitoring methods. At the beginning of 1982 a gamma dosimetry program will be put into effect for all uranium mine and mill workers. An improved method is also being sought to determine radon daughter exposures more accurately. It is expected that a better knowledge of monitoring and assessing thoron daughter levels in mine and mill facilities will be obtained soon. This radiation contribution will be included when calculating a combined radiation exposure factor for individual workers. Programs are underway to better monitor and assess uranium dust inhalation. Initial studies indicate that the present precautions taken to avoid dust inhalation at the mills are effective. A more complete study will be undertaken in 1982

An outbreak of Koro among 19 workers in a jute mill in south Bengal

Directory of Open Access Journals (Sweden)

Suddhendu Chakraborty

2011-01-01

Full Text Available Koro is a culture-bound syndrome that is characterized by the belief of retraction of genitals into the abdomen. It was initially reported in Asian countries, as having a usual acute and brief course. Two case clusters have been described in this article. Both occurred in the same jute mill in southern West Bengal among the workers. The case clusters depict unique socioeconomic factors and interesting health-seeking behavior toward koro. All the cases had a self-limiting course and reasonably good outcome. The case cluster yet again confirms that koro is not as rare as it is thought of and social and economic factors continue to play an important role in the etiology of the disease.

Assessment of Air Pollution and its Effects on Health of Workers of Steel Re-Rolling Mills in Hyderabad

Directory of Open Access Journals (Sweden)

Altaf Alam Noonari

2016-04-01

Full Text Available The SRRMs (Steel Re-Rolling Mills are being releasing air pollutants in the environment. In order to evaluate their effect on the health of the workers, health and safety issues were analyzed by first measuring the concentrations of SO x (OIxides of Sulphur, NO x (Oxides of Nitrogen, CO (Carbon Monoxide and O2 (Oxygen produced in the three SRRMs located in SITE area Hyderabad. The mean concentration of SO x , NO x and CO were in the order of 0.35, 0.280, 6.333 ppm, respectively, whereas the mean concentration of O 2 was 203.53 thousand ppm. As per results, the concentration ofair pollutants, including SOx and NO x were significantly higher than to the NEQS (National Environmental Quality Standards and NAAQS (National Ambient Air Quality Standards. The concentration ofCO was lower than to the NAAQS, but higher than to the NEQs, while the concentration of O2 was slightly lower than to the standard value. The workers who were exposed to these air pollutants are being suffering from chronic diseases related to breathing and allergies. Moreover, labour staff was lifting heavy loads manually, which causes them to muscular and joint problems. In all the SRRMs under study, the electrical and mechanical equipments were used without any safety. The MSDS were not displayed on the workstations, the housekeeping was inadequate and most of the workers were performing their jobs without personal protective equipment. In addition to these, the other serious issues related to the occupational health and safety were an unhygienic supply of water, higher noise level, placement of explosive cylinders in the open atmosphere and unavailability of the first aid facilities in the Mill premises.

Glufosinate herbicide-tolerant (LibertyLink) rice vs. conventional rice in diets for growing-finishing swine.

Science.gov (United States)

Cromwell, G L; Henry, B J; Scott, A L; Gerngross, M F; Dusek, D L; Fletcher, D W

2005-05-01

Genetically modified (GM) rice (LibertyLink, event LLRICE62) that is tolerant to glufosinate ammonium (Liberty) herbicide was compared with a near-isogenic (NI) conventional medium-grain brown rice (cultivar, Bengal) and a commercially milled long-grain brown rice in diets for growing-finishing pigs. The GM and NI rice were grown in 2000. The GM rice was from fields treated (GM+) or not treated (GM-) with glufosinate herbicide. The GM- and NI rice were grown using herbicide regimens typical of southern United States rice production practices. The four rice grains were similar in composition. Growing-finishing pigs (n = 96) were fed fortified rice-soybean meal diets containing the four different rice grains from 25 to 106 kg BW. Diets contained 0.99% lysine initially (growing phase), with lysine decreased to 0.80% (early finishing phase) and 0.65% (late finishing phase), when pigs reached 51 and 77 kg, respectively. The percentage of rice in the four diets was constant during each of the three phases (72.8, 80.0, and 85.8% for the growing, early-finishing, and late-finishing phases, respectively). There were six pen replicates (three pens of barrows and three pens of gilts) and four pigs per pen for each dietary treatment. All pigs were slaughtered at the termination of the study to collect carcass data. At the end of the 98-d experiment, BW gain, feed intake (as-fed basis), and feed:gain ratio did not differ (P > 0.05) for pigs fed the GM+ vs. conventional rice diets, but growth performance traits of pigs fed the GM+ rice diets were superior (P glufosinate herbicide-tolerant rice was similar in composition and nutritional value to conventional rice for growing-finishing pigs.

[Response of rice grain quality traits to free-air CO2 enrichment].

Science.gov (United States)

Dong, Guichun; Wang, Yulong; Huang, Jianye; Yang, Hongjian; Gu, Hui; Peng, Bin; Ju, Jing; Yang, Lianxin; Zhu, Jianguo; Shan, Yuhua

2004-07-01

The study showed that under field condition, when the CO2 concentration was elevated 200 micromol x mol(-1) above control, the average brown rice rate of japonica variety Wuxiangjing 14 was 1.4% higher, while lead milled rice rate was 12.3% lower than control. The brown rice rate increased at lower nitrogen supply level (LN), while lead milled rice rate increased at higher nitrogen supply level (HN). The percentage of chalky grain was 11.9% higher, and chalkiness degree was 2.8% higher than control, but no obvious difference was found in chalkiness area between the FACE and the control. The chalkiness area, percentage of chalky grain and chalkiness degree decreased at HN plus higher phosphorus supply level (HP). The gelatinization temperature was elevated 0.52 degrees C, gel consistency increased, while amylose content was not statistically significant. The amylose content decreased at HN plus HP, while gel consistency and gelatinization temperature decreased at LN plus HP and at LN, respectively. The protein content was decreased 0.6% under FACE treatment and at LN plus lower phosphorus supply level.

Rice Husk as Filler in the Production of Bricks Using Gboko Clay ...

African Journals Online (AJOL)

Farmers and rice millers normally burn the rice husk (RH)as fuel in milling which leads to air pollution. This study looked at ways of converting the husk into materials for the construction industry. Chemical composition of RH and Gboko clay soil were investigated using X-ray diffraction test. Four grades (75, 150, 300, 425 ...

76 FR 30397 - Faribault Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of...

Science.gov (United States)

2011-05-25

... Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of Faribault Woolen Mill... December 9, 2009, applicable to workers of Faribault Woolen Mill Company, Faribault, Minnesota. The notice... Mill Company, a retail outlet store for the subject firm, Faribault Woolen Mill Company. Accordingly...

Exploring the possibility of using digital image processing technique to detect diseases of rice leaf

OpenAIRE

S. H Peyman; A Bakhshipour Ziaratgahi; A Jafari

2016-01-01

Introduction: Rice is a very important staple food crop provides more than half of the world caloric supply. Rice diseases lead to significant annual crop losses, have negative impacts on quality of the final product and destroy plant variety. Rice Blast is one of the most widespread and most destructive fungal diseases in tropical and subtropical humid areas, which causes significant decrease in the amount of paddy yield and quality of milled rice. Brown spot disease is another important ...

The effect of rice kernel microstructure on cooking behaviour: A combined µ-CT and MRI study

NARCIS (Netherlands)

Mohoric, A.; Vergeldt, F.J.; Gerkema, E.; Dalen, van G.; Doel, van den L.R.; Vliet, van L.J.; As, van H.; Duynhoven, van J.P.M.

2009-01-01

In order to establish the underlying structure-dependent principles of instant cooking rice, a detailed investigation was carried out on rice kernels that were processed in eight different manners. Milling, parboiling, wet-processing and extrusion were applied, with and without a subsequent puffing

Genetic Architecture of Grain Chalk in Rice and Interactions with a Low Phytic Acid Locus

Science.gov (United States)

Grain quality characteristics have a major impact on the value of the harvested rice crop. In addition to grain dimensions which determine rice grain market classes, translucent milled kernels are also important for assuring the highest grain quality and crop value. Over the last several years, ther...

Analysis of the Economic Potential for a Mercosur Rice Futures Market

Directory of Open Access Journals (Sweden)

Waldemar Antonio da Rocha de Souza

2015-08-01

Full Text Available World rice production reached 488.4 thousand tons, in 2012. Asian countries are the world’s largest rice producers, followed by Latinamerica, particularly Brazil, where rice is a basic food item. In spite of the clear economic benefits bestowed by commodity futures markets, neither Asia nor Mercosur have implemented a regional rice futures market. In sum, we propose to investigate the feasibility of a Brazilian rice futures contract to serve the Mercosur region by estimating Mercosur rice price dynamics and analyze basis risk and hedging effectiveness for rice market agents in the region, in a simulation framework using a hypothetical regional contract price. Sample data and period was non-probabilistic, for accessibility and convenience. Mercosur rice price dynamics expressed Argentina and Uruguay rice prices moving in synchrony. Brazil rice prices were on lower levels. Also, all three pairs of rice price series are cointegrated, with one cointegrating equation. Again, results can be largely attributed to the different price data used, in Brazil was rough rice, while in Uruguay and Argentina milled white rice with 5%. Despite that, there are preliminary evidences that a Mercosur rice futures market could be feasible.

Cadmium and lead contamination in japonica rice grains and its variation among the different locations in southeast China

International Nuclear Information System (INIS)

Cheng Fangmin; Zhao Ningchun; Xu Haiming; Li Yi; Zhang Wenfang; Zhu Zhiwei; Chen Mingxue

2006-01-01

On the basis of a large-scale survey with 269 sampling sites and a field experiment with 12 cultivars grown at 3 ecologically different locations, Cadmium (Cd) and lead (Pb) contamination in milled rice grains and its variation among different locations were investigated in the area of southeast China. The objective of this study was mainly to assess the present situation of Cd and Pb contamination in rice grains harvested locally and find out the variation of Cd and Pb background levels in rice grains among the diverse regional locations. The results showed that: a) Cd concentrations in milled rice grains ranged from trace (below 10 ng/g) to 340 ng/g, with the means of 81.4 ng/g (AM) and 55.2 ng/g (GM) for the 269 samples, whereas Pb concentrations ranged from trace (below 10 ng/g) to 1136 ng/g, with the means of 113.5 ng/g (AM) and 51.0 ng/g (GM), respectively. High frequency was observed for both the Cd and Pb concentrations ranging from trace to 200 ng/g, with 95.9% for Cd and 84.8% for Pb, respectively. b) ANOVA for the AMs and GMs among 269 sampling sites indicated that there were significant differences among the different spatial locations in Cd or Pb concentrations. c) The Cd concentrations in milled rice grains were poorly correlated with Pb concentration among the 269 sampling sites surveyed, and no significant difference (P > 0.05) in the AMs or GMs of Cd and Pb concentration was observed among different cities within a range of the same provinces, only with an exception for 1-2 provinces. d) Variance analysis of Cd, Pb concentrations for 12 rice cultivars grown in three locations showed that the great difference in coefficients of variation (CV) was observed both among cultivars grown in the same location and among locations of cultivars planted, in which locations showed much more contribution to the variation of Cd or Pb concentration in milled rice grains as compared with cultivars

Soybean-Enriched Snacks Based on African Rice

Science.gov (United States)

Marengo, Mauro; Akoto, Hannah F.; Zanoletti, Miriam; Carpen, Aristodemo; Buratti, Simona; Benedetti, Simona; Barbiroli, Alberto; Johnson, Paa-Nii T.; Sakyi-Dawson, Esther O.; Saalia, Firibu K.; Bonomi, Francesco; Pagani, Maria Ambrogina; Manful, John; Iametti, Stefania

2016-01-01

Snacks were produced by extruding blends of partially-defatted soybean flour with flours from milled or parboiled African-grown rice. The interplay between composition and processing in producing snacks with a satisfactory sensory profile was addressed by e-sensing, and by molecular and rheological approaches. Soybean proteins play a main role in defining the properties of the protein network in the products. At the same content in soybean flour, use of parboiled rice flour increases the snack’s hardness. Electronic nose and electronic tongue discriminated samples containing a higher amount of soybean flour from those with a lower soybean flour content. PMID:28231133

Assessment of suitability of selected rice varieties for production of expanded rice

Directory of Open Access Journals (Sweden)

Vijayalaxmi Kamaraddi

2015-12-01

Full Text Available Expanded rice, prepared from pre-gelatinized milled rice by sand roasting method, is a popular snack food of India. Five high-yielding rice varieties of Hill zone of Karnataka state, viz., IET-13901, KHP-2, KHP-5, KHP-10, and Intan were screened for puffing quality based on their physicochemical, functional, nutritional and organoleptic parameters with Rajamudi as local check. The effect of varietal differences on expansion/puffing quality parameters, in vitro digestibility of starch and protein as well as bioaccessibility of iron, zinc, and calcium were determined. Results indicated a strong positive correlation between amylose content and expansion ratio and a negative correlation between protein and amylose content, length expansion ratio and volume expansion ratio. Expansion characteristics showed that the varieties suitable for production of puffed rice were KHP-2, IET-13901 and Intan. Nutritional analysis showed following ranges of nutrient content in expanded rice: protein, 6.22–8.17%; fat, 0.06–0.14%; and as mg/100 g calcium, 20.5–23.5; iron, 2.01–2.72; zinc, 1.22–1.82; thiamine, 0.315–0.470; riboflavin, 0.051–0.069; and niacin, 3.18–4.68. Nearly 80.3–80.8% starch and 67.6–83.2% protein was digestible. Among all varieties, KHP-2 had lowest amount of rapidly digestible starch (61.4%. Mineral bioaccessibility ranged from 42.7 to 52.1%. Sensory analysis indicated that Intan and KHP-2 were superior and suited for production of expanded rice.

Radiation protection of workers from uranium mines and of the public living nearby uranium mining and milling facilities

International Nuclear Information System (INIS)

Kiselev, Mikhail; Romanov, Vladimir; Shandala, Nataliya; Gneusheva, Galina; Titov, Alex; Novikova, Natalia; Smith, Graham

2008-01-01

As part of the program of nuclear power development, the Russia Federation plans to increase uranium production and to improve supply from existing uranium mining and milling facilities. Moreover, development of new uranium ore deposits is also envisaged. A corollary of these developments is the placing of a high priority on environmental and human health protection Special attention should be paid to assurance of health protection both of workers and of the public living nearby such facilities. This paper reviews the status and development of understanding of facilities in the Russian Federation from a regulatory perspective. (author)

Rice breeding with induced mutations in France

Energy Technology Data Exchange (ETDEWEB)

Marie, R [Station d' Amelioration des Plantes, Institut National de Recherches Agronomiques, Montpellier (France)

1970-03-01

Mutation experiments with rice at Montpellier yielded strains with improved lodging resistance, grain size, maturing time, milling quality and other characters. The general performance of these mutant strains was tested in field trials. Further mutagenic treatments were made to improve the high-yielding short grain varieties with regard to grain quality and seed dormancy. (author)

Inorganic arsenic removal in rice bran by percolating cooking water.

Science.gov (United States)

Signes-Pastor, Antonio J; Carey, Manus; Meharg, Andrew A

2017-11-01

Rice bran, a by-product of milling rice, is highly nutritious but contains very high levels of the non-threshold carcinogen inorganic arsenic (i-As), at concentrations around 1mg/kg. This i-As content needs to be reduced to make rice bran a useful food ingredient. Evaluated here is a novel approach to minimizing rice bran i-As content which is also suitable for its stabilization namely, cooking bran in percolating arsenic-free boiling water. Up to 96% of i-As removal was observed for a range of rice bran products, with i-As removal related to the volume of cooking water used. This process reduced the copper, potassium, and phosphorus content, but had little effect on other trace- and macro-nutrient elements in the rice bran. There was little change in organic composition, as assayed by NIR, except for a decrease in the soluble sugar and an increase, due to biomass loss, in dietary fiber. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of Pig Slurry as Basal and Panicle Fertilizer on Trace Element Content and Grain Quality in Direct-Seeding Rice

Directory of Open Access Journals (Sweden)

Lifen Huang

2016-07-01

Full Text Available Direct-seeding rice has grown in popularity in recent years and is widespread in China. This study focused on the effects of pig slurry (PS on grain quality and safety in direct-seeding rice. Application of more than 210 m3·hm−2 increased rice yield and dry matter accumulation, compared with conventional chemical fertilizer treatment (CK2. At the heading and maturing stage, a high dosage of PS (T6, T8 and T9 treatments promoted uptake of Pb, Cu, Zn, Fe and Mn by rice plants and grain, but retarded uptake of Cr, Co and Ni, indicating an ability to alleviate toxicity of some heavy metals. Compared with CK2, PS alleviated the transfer of Pb, Cr, Co, Ni and Cu from straw to grain, but enhanced the transport of Zn, Fe and Mn. Although PS application slightly diminished the processing quality, including brown rice, milled rice and head milled rice, it significantly decreased the amylose content, optimized the starch profile, and improved the overall quality. The results confirmed the feasibility and safety of PS application to direct-seeding rice, and determined that PS basal and panicle fertilizer could increase yield and improve the rice quality when applied between 210 and 240 m3·hm−2.

Influence of aging on culinary and chemical properties of basmati 385 rice grain

International Nuclear Information System (INIS)

Ali, L.; Ali, A.; Karim, M.A.; Ali, S.S.; Hassan, G.

2004-01-01

The influence of aging of milled rice on physico-chemical characteristics was studied during 1989-90 and 1990-91. Rice from freshly harvested paddy was stored in a cloth bag at room temperature. Analysis of rice was done for 24-months, starting from zero at a uniform interval of one month. However the effect of aging on cooking time was not significant. Water absorption and volume expansion increased throughout the aging period. Similarly, cooked grain length was minimum (13.9 mm) in freshly milled rice, it increased gradually with the storage period and obtained a maximum value (15.5 mm) after 2-year storage. Bursting of grains during cooking decreased from 11.5% to 2.0% on storage. Loss of total solids in washing water and gruel was the highest (14.9%) at the beginning of the experiment which decreased significantly and reached the lowest value (3.2%) at the completion of the studies. The effect of aging on protein content, alkali spreading value and gel length was, however, non-significant. Amylose content decreased slightly during aging but remained in the intermediate amylose group. (author)

Soybean-Enriched Snacks Based on African Rice

Directory of Open Access Journals (Sweden)

Mauro Marengo

2016-05-01

Full Text Available Snacks were produced by extruding blends of partially-defatted soybean flour with flours from milled or parboiled African-grown rice. The interplay between composition and processing in producing snacks with a satisfactory sensory profile was addressed by e-sensing, and by molecular and rheological approaches. Soybean proteins play a main role in defining the properties of the protein network in the products. At the same content in soybean flour, use of parboiled rice flour increases the snack’s hardness. Electronic nose and electronic tongue discriminated samples containing a higher amount of soybean flour from those with a lower soybean flour content.

Using rice straw to manufacture ceramic bricks

Directory of Open Access Journals (Sweden)

Gorbunov German Ivanovich

2014-12-01

Full Text Available In the article, the co-authors offer their advanced and efficient methodologies for the recycling of the rice straw, as well as the novel approaches to the ceramic brick quality improvement through the application of the rice straw as the combustible additive and through the formation of amorphous silica in the course of the rice straw combustion. The co-authors provide characteristics of the raw materials, production techniques used to manufacture ceramic bricks, and their basic properties in the article. The co-authors describe the simulated process of formation of amorphous silica. The process in question has two independent steps (or options: 1 rice straw combustion and ash formation outside the oven (in the oxidizing medium, and further application of ash as the additive in the process of burning clay mixtures; 2 adding pre-treated rice straw as the combustible additive into the clay mixture, and its further burning in compliance with the pre-set temperature mode. The findings have proven that the most rational pre-requisite of the rice straw application in the manufacturing of ceramic bricks consists in feeding milled straw into the clay mixture to be followed by molding, drying and burning. Brick samples are highly porous, and they also demonstrate sufficient compressive strength. The co-authors have also identified optimal values of rice straw and ash content in the mixtures under research.

Effect of soaking and phytase treatment on phytic acid, calcium, iron and zinc in rice fractions

NARCIS (Netherlands)

Liang, J.; Han, B.Z.; Nout, M.J.R.; Hamer, R.J.

2009-01-01

With the aim to maximise phytic acid removal and minimise losses of dry matter and minerals (Ca, Fe, Zn) in rice, three products (whole kernels and flour milled from white and brown rice; and bran, all from the same batch of variety Kenjian 90-31) were soaked in demineralized water at 10 °C (SDW),

Development of Ozone Technology Rice Storage Systems (OTRISS) for Quality Improvement of Rice Production

International Nuclear Information System (INIS)

Nur, M; Kusdiyantini, E; Wuryanti, W; Winarni, T A; Widyanto, S A; Muharam, H

2015-01-01

This research has been carried out by using ozone to address the rapidly declining quality of rice in storage. In the first year, research has focused on the rice storage with ozone technology for small capacity (e.g., household) and the medium capacity (e.g., dormitories, hospitals). Ozone was produced by an ozone generator with Dielectric Barrier Discharge Plasma (DBDP). Ozone technology rice storage system (OTRISS) is using ozone charateristic which is a strong oxidizer. Ozone have a short endurance of existence and then decompose, as a result produce oxygen and radicals of oxygen. These characteristics could kill microorganisms and pests, reduce air humidity and enrich oxygen. All components used in SPBTO assembled using raw materials available in the big cities in Indonesia. Provider of high voltage (High Voltage Power Supply, 40-70 kV, 23 KH, AC) is one of components that have been assembled and tested. Ozone generator is assembled with 7 reactors of Dielectric Barrier Discharge Plasma (DBDP). Rice container that have been prepared for OTRISS have adjusted so can be integrated with generator, power supply and blower to blow air. OTRISS with a capacity of 75 kg and 100 kg have been made and tested. The ability of ozone to eliminate bacteria and fungi have been tested and resulted in a decrease of microorganisms at 3 log CFU/g. Testing in food chemistry showed that ozone treatment of rice had not changed the chemical content that still meet the standard of chemical content and nutritional applicable to ISO standard milled rice. The results of this study are very likely to be used as an alternative to rice storage systems in warehouse. Test and scale-up is being carried out in a mini warehouse whose condition is mimicked to rice in National Rice Storage of Indonesia (Bulog) to ensure quality. Next adaptations would be installed in the rice storage system in the Bulog. (paper)

Novel QTLs affecting rice kernel fissure resistance discovered in the cultivar ‘Saber’ augment those from ‘Cybonnet’

Science.gov (United States)

Kernel fissures in rice (Oryza sativa L.) caused by pre- or post-harvest stresses are the leading cause of breakage among milled rice. Such breakage causes economic losses for producers, millers, and marketers. Five QTLs for kernel fissure resistance (FR) were identified among a set of 275 RILs de...

Deciphering the Environmental Impacts on Rice Quality for Different Rice Cultivated Areas.

Science.gov (United States)

Li, Xiukun; Wu, Lian; Geng, Xin; Xia, Xiuhong; Wang, Xuhong; Xu, Zhengjin; Xu, Quan

2018-01-19

Rice (Oryza sativa L.) is cultivated in a wide range of climatic conditions, and is one of mankind's major staple foods. The interaction of environmental factors with genotype effects major agronomic traits such as yield, quality, and resistance in rice. However, studies on the environmental factors affecting agronomic traits are often difficult to conduct because most environmental factors are dynamic and constantly changing. A series of recombinant inbred lines (RILs) derived from an indica/japonica cross were planted into four typical rice cultivated areas arranging from latitude N22° to N42°. The environmental data from the heading to mature (45 days) stages were recorded for each RIL in the four areas. We determined that light, temperature, and humidity significantly affected the milling quality and cooking quality overall the four areas. Within each area, these environmental factors mainly affected the head rice ratio, grain length, alkali consumption, and amylose and protein content. Moreover, the effect of these environmental factors dynamically changed from heading to mature stage. Compared to light and humidity, temperature was more stable and predictable, and night temperature showed a stronger correlation efficiency to cooking quality than day temperature, and the daily temperature range had contrary effects compared to day and night temperature on grain quality. The present study evaluated the critical phase during the grain filling stage by calculating the dynamic changes of correlation efficiency between the quality traits and climate parameters. Our findings suggest that the sowing date could be adjusted to improve rice quality so as to adjust for environmental changes.

Effect of rice bran supplementation on cookie baking quality

International Nuclear Information System (INIS)

Younis, A.; Bhatti, M.S.; Ahmed, A

2011-01-01

Rice bran, a by-product obtained during polishing of un-milled rice, contains a large quantity of essential nutrients such as minerals, vitamins, fiber, amino acids and antioxidants. Supplementation of rice bran in cookies can improve their nutritional value. In the present study, cookies were prepared from wheat flour with supplementation of rice bran at the rate of 5, 10, 15 and 20 percent. The rice bran was stabilized with acid and dry heat treatment before supplementation. Chemical analysis of the cookies revealed that there was no significant difference in chemical and physical properties of cookies supplemented with acid stabilized rice bran (ASRB) and heat stabilized rice bran (HSRB). The moisture, crude protein, fat and mineral contents were significantly increased with the increment of rice bran. Average width, thickness and spread factor of cookies also increased with the increase in percentage of rice bran. Sensory evaluation of cookies showed that scores for color of cookies decreased significantly with increase in level of rice bran and sensory scores were significantly higher in the cookies prepared with HSRB. However the decrease was non-significant at 10 percent level of substitution. Highest scores for overall acceptability of supplemented cookies was recorded at 15 percent level of substitution as compared to other treatments. Hence it is concluded from the results that supplementation of HSRB at the rate of 10 percent is more suitable for production of rice bran supplemented cookies. (author)

Relationships of damaged starch granules and particle size distribution with pasting and thermal profiles of milled MR263 rice flour.

Science.gov (United States)

Asmeda, R; Noorlaila, A; Norziah, M H

2016-01-15

This research was conducted to investigate the effects of different grinding techniques (dry, semi-wet and wet) of milled rice grains on the damaged starch and particle size distribution of flour produced from a new variety, MR263, specifically related to the pasting and thermal profiles. The results indicated that grinding techniques significantly (price flour. Wet grinding process yields flour with lowest percentage of starch damage (7.37%) and finest average particle size (8.52μm). Pasting and gelatinization temperature was found in the range of 84.45-89.63°C and 59.86-75.31°C, respectively. Dry ground flour attained the lowest pasting and gelatinization temperature as shown by the thermal and pasting profiles. Correlation analysis revealed that percentage of damaged starch granules had a significant, negative relationship with pasting temperature while average particle size distribution had a significant, strong negative relationship with gelatinization temperature. Copyright © 2015 Elsevier Ltd. All rights reserved.

Engineering the provitamin A (beta-carotene) biosynthetic pathway into (carotenoid-free) rice endosperm.

Science.gov (United States)

Ye, X; Al-Babili, S; Klöti, A; Zhang, J; Lucca, P; Beyer, P; Potrykus, I

2000-01-14

Rice (Oryza sativa), a major staple food, is usually milled to remove the oil-rich aleurone layer that turns rancid upon storage, especially in tropical areas. The remaining edible part of rice grains, the endosperm, lacks several essential nutrients, such as provitamin A. Thus, predominant rice consumption promotes vitamin A deficiency, a serious public health problem in at least 26 countries, including highly populated areas of Asia, Africa, and Latin America. Recombinant DNA technology was used to improve its nutritional value in this respect. A combination of transgenes enabled biosynthesis of provitamin A in the endosperm.

Potassium hydroxide pulping of rice straw in biorefinery initiatives.

Science.gov (United States)

Jahan, M Sarwar; Haris, Fahmida; Rahman, M Mostafizur; Samaddar, Purabi Rani; Sutradhar, Shrikanta

2016-11-01

Rice straw is supposed to be one of the most important lignocellulosic raw materials for pulp mill in Asian countries. The major problem in rice straw pulping is silica. The present research is focused on the separation of silica from the black liquor of rice straw pulping by potassium hydroxide (KOH) and pulp evaluation. Optimum KOH pulping conditions of rice straw were alkali charge 12% as NaOH, cooking temperature 150°C for 2h and material to liquor ratio, 1:6. At this condition pulp yield was 42.4% with kappa number 10.3. KOH pulp bleached to 85% brightness by D0EpD1 bleaching sequences with ClO2 consumption of 25kg/ton of pulp. Silica and lignin were separated from the black liquor of KOH pulping. The amount of recovered silica, lignin and hemicelluloses were 10.4%, 8.4% and 13.0%. The papermaking properties of KOH pulp from rice straw were slightly better than those of corresponding NaOH pulp. Copyright © 2016 Elsevier Ltd. All rights reserved.

Radiation protection in uranium mining and milling industry

International Nuclear Information System (INIS)

Raghavayya, M.

2005-01-01

The first phase of the Nuclear Fuel Cycle is exploration for uranium and the next is mining and milling of uranium ore. This phase is mostly characterised by low levels of radioactivity and radiation exposure of the workers involved. Yet it is a paradoxical truth that incidence of cancer among the work force, especially miners, due to occupational radiation exposure (from radon and decay products) has been proved only in uranium mines in the entire Nuclear Fuel Cycle. Of course such incidence occurred before the detrimental effect of radiation exposure was realised and understood. Therefore it is important to familiarise oneself with the radiation hazards prevalent in the uranium mining and milling facilities so as to take appropriate remedial measures for the protection of not only the workers but also the public at large. There are both open cast and underground uranium mines around the world. Radiation hazards are considerably less significant in open cast mines than in underground mines unless the ore grade is very high. By default therefore the discussion which ensues relates mainly to radiation hazards in underground uranium mines and associated milling operations. The discussion gives a brief outline of typical uranium mine and mining and milling operations. This is followed by a description of the radiation hazards therein and protection measures that are to be taken to minimise radiation exposure. (author)

Variation in Yield and Physicochemical Quality Traits among Mutants of Japonica Rice Cultivar Wuyujing 3

Directory of Open Access Journals (Sweden)

Jose Daniel Abacar

2016-01-01

Full Text Available To select elite germplasms, 112 mutants derived from japonica rice cultivar Wuyujing 3 were evaluated. The yield components such as panicle number per square meter, grain number per panicle, and grain weight were measured. The quality traits such as percentage of chalky grains (PCG, brown rice yield (BRY, milled rice yield (MRY, degree of milling (DM, amylose content (AC, protein content (PC, and relationships among traits were inverstigated. Results showed that grain yield ranged from 2.15 to 12.49 t/hm2 with a mean of 6.4 t/hm2 and number of grains per square meter contributed for 94.64% in grain yield variation. For quality traits, all rice mutants had short size (grain length ≤ 5.5 mm and bold shape (grain length to width ratio = 1.10–2.00. Most of rice mutants (87.5% had PCG values below 20%. All mutants had MRY values above 50%, AC values below 20%, and PC values below 10%. Percentage of chalky grains was significantly negatively correlated with MRY and positively correlated with DM. BRY and MRY were significantly negatively correlated with DM. PC was significantly and positively correlated with MRY and negatively correlated with DM, while AC had no significant correlation with these quality traits. It was concluded that there were 25 rice mutants which fulfilled the major requirements of Jiangsu standard japonica rice such as low percentage of chalky grains, low amylose content, optimal protein content, and which could be used as elite germplasms. Thus the mutants identified may lead to significant progress in improvement of rice quality.

Fine mapping and introgressing qFIS1-2, a major QTL for kernel fissure resistance in rice (Oryza sativa L.)

Science.gov (United States)

Rice (Oryza sativa L.) kernel fissuring increases breakage during milling and decreases the value of processed rice. This study employed molecular gene tagging methods to fine-map a fissure resistance (FR) locus in ‘Cybonnet’, a semidwarf tropical japonica cultivar, as well as transfer this trait to...

Yield and Quality Traits of some Rice Mutant Lines as Affected by Different Nitrogen Levels

International Nuclear Information System (INIS)

Sobieh, S.El-S.S.

2007-01-01

Two field experiments were carried out during two growing seasons (2004 and 2005) at a farm located in Sahafa village, Sharkia Governorate, to evaluate newly rice mutants comparing with the local cultivar Sakha 104 for yield and quality characteristics as affected by nitrogen fertilizer levels. The obtained results showed that: 1- Rice grain yield and yield attributes were significantly increased with increasing N levels from 23 to 69 kg N fed '. 2- Both mutant MG 16 and MS 6 exhibited highly significant increases in mean values for yield attributes except for number of panicles/m2, as compared with the local cultivar Sakha 104. 3- Percentage of yield increases were 26.85 and 16.21 % for mutant MG16 and MS6 comparing with the local variety Sakha 104, respectively. Mutant MG 16 showed the highest mean values for plant height, panicle length, number of grains per panicle, panicle weight, 1000-grain weight, grain yield/fed, and straw yield/fed, as compared with the mutant MS 6 and Sakha 104. 4- Hulling and milling % were significantly increased as increasing of nitrogen levels from 23 to 69 kg N fed 1 , whereas head rice, gel consistency and amylose content were not significantly affect. 5- Significant differences were obtained between the three rice genotypes for hulling %, milling %, head rice %, amylose content and gel consistency

Rice Bran Oil: A Versatile Source for Edible and Industrial Applications.

Science.gov (United States)

Pal, Yogita P; Pratap, Amit P

2017-01-01

Rice bran oil (RBO) is healthy gift generously given by nature to mankind. RBO is obtained from rice husk, a byproduct of rice milling industry and is gaining lot of importance as cooking oil due to presence of important micronutrient, gamma oryzanol. Its high smoke point is beneficial for its use for frying and deep frying of food stuff. It is popular because of balanced fatty acid profile (most ideal ratio of saturated, monounsaturated and polyunsaturated fatty acids), antioxidant capacity, and cholesterollowering abilities. Rice bran wax which is secondary by-product obtained as tank settling from RBO is used as a substitute for carnauba wax in cosmetics, confectionery, shoe creams etc. It can be also used as a source for fatty acid and fatty alcohol. The article is intended to highlight for the importance of RBO and its applications.

Uranium mill tailings and risk estimation

International Nuclear Information System (INIS)

Marks, S.

1984-04-01

Work done in estimating projected health effects for persons exposed to mill tailings at vicinity properties is described. The effect of the reassessment of exposures at Hiroshima and Nagasaki on the risk estimates for gamma radiation is discussed. A presentation of current results in the epidemiological study of Hanford workers is included. 2 references

Human exposure to mercury in a compact fluorescent lamp manufacturing area: By food (rice and fish) consumption and occupational exposure

International Nuclear Information System (INIS)

Liang, Peng; Feng, Xinbin; Zhang, Chan; Zhang, Jin; Cao, Yucheng; You, Qiongzhi; Leung, Anna Oi Wah; Wong, Ming-Hung; Wu, Sheng-Chun

2015-01-01

To investigate human Hg exposure by food consumption and occupation exposure in a compact fluorescent lamp (CFL) manufacturing area, human hair and rice samples were collected from Gaohong town, Zhejiang Province, China. The mean values of total mercury (THg) and methylmercury (MeHg) concentrations in local cultivated rice samples were significantly higher than in commercial rice samples which indicated that CFL manufacturing activities resulted in Hg accumulation in local rice samples. For all of the study participants, significantly higher THg concentrations in human hair were observed in CFL workers compared with other residents. In comparison, MeHg concentrations in human hair of residents whose diet consisted of local cultivated rice were significantly higher than those who consumed commercial rice. These results demonstrated that CFL manufacturing activities resulted in THg accumulation in the hair of CFL workers. However, MeHg in hair were mainly affected by the sources of rice of the residents. - Highlights: • Rice samples were contaminated by Compact fluorescent lamp (CFL) manufacturing. • CFL manufacturing lead to THg accumulation in human hair. • MeHg in human hair were mainly affected by the sources of rice. • MeHg intake from fish consumption was lower than that from rice consumption. • PDI of MeHg by food consumption was below the guidelines for public health concern. - CFL manufacturing activities result in Hg accumulation in local rice samples and hair of CFL workers. However, MeHg in hair were mainly affected by sources of rice

Background paper for regulations related to the exposure of uranium mine and mill workers

International Nuclear Information System (INIS)

1978-01-01

The Atomic Energy Control Board is modifying the Atomic Energy Control Regulations to include a maximum permissible exposure to radon daughters for uranium mine and mill workers. In January 1976, after consultation with the uranium producers, union, and government regulatory bodies, the AECB issued a directive endorsing a maximum permissible annual occupational exposure to radon daughters of 4 Working Level Months (WLM). This exposure limit was an interim guideline to be applied for at least one year. The Board staff and members of the Mine Safety Advisory Committee have examined available evidence on the excess risk of lung cancer owing to exposure to radon daughters since then, and have assessed the arguments for both raising and lowering the exposure limit. The evidence is still not conclusive, and further studies, especially epidemiological ones, are needed. Nevertheless, the Board considers that the interim guideline is acceptable in the light of the present state of knowledge and that it should be incorporated into the regulations. This document explains why the Board has made this decision and discusses a number of related issues

Direct ethanol production from starch, wheat bran and rice straw by the white rot fungus Trametes hirsuta.

Science.gov (United States)

Okamoto, Kenji; Nitta, Yasuyuki; Maekawa, Nitaro; Yanase, Hideshi

2011-03-07

The white rot fungus Trametes hirsuta produced ethanol from a variety of hexoses: glucose, mannose, cellobiose and maltose, with yields of 0.49, 0.48, 0.47 and 0.47 g/g of ethanol per sugar utilized, respectively. In addition, this fungus showed relatively favorable xylose consumption and ethanol production with a yield of 0.44 g/g. T. hirsuta was capable of directly fermenting starch, wheat bran and rice straw to ethanol without acid or enzymatic hydrolysis. Maximum ethanol concentrations of 9.1, 4.3 and 3.0 g/l, corresponding to 89.2%, 78.8% and 57.4% of the theoretical yield, were obtained when the fungus was grown in a medium containing 20 g/l starch, wheat bran or rice straw, respectively. The fermentation of rice straw pretreated with ball milling led to a small improvement in the ethanol yield: 3.4 g ethanol/20 g ball-milled rice straw. As T. hirsuta is an efficient microorganism capable of hydrolyzing biomass to fermentable sugars and directly converting them to ethanol, it may represent a suitable microorganism in consolidated bioprocessing applications. Copyright © 2010 Elsevier Inc. All rights reserved.

Fabrication and characterization of rice husk charcoal bio briquettes

Science.gov (United States)

Suryaningsih, S.; Nurhilal, O.; Yuliah, Y.; Salsabila, E.

2018-02-01

Rice husk is the outermost part of the rice seed which is a hard layer and a waste material from rice milling. Rice husk includes biomass that can be exploited for various requirements such as industrial raw materials as well as energy sources or fuel but only a small group of people use it. This research is conducted utilizing the rice husk as an alternative fuel by making it as a charcoal briquette. To make the treatment easy, firstly the rice husk biomass was converted into charcoal powder by carbonization method using two kinds of furnace which have different heating behavior. The best carbonization results are obtained from the furnace, which has a constant temperature heating behavior. The process of making briquettes is prepared by adding tapioca starch of 6% concentration by weight as charcoal adhesive and then printed with the aid of pressing tools using loads at 1,000 kg/cm2. The resulting briquette has a calorific value about 3.126 cal/g, mass density is 0.86 g/cm3 and compressive strength is about 2.02 kg/cm2, so that the bio-briquette of charcoal produced can be used as alternative energy to replace the fossil fuel for domestic or household purposes.

CHEMICAL COMPOSITION AND FUNCTIONAL PROPERTIES OF RICE PROTEIN CONCENTRATES

Directory of Open Access Journals (Sweden)

V. V. Kolpakova

2015-01-01

Full Text Available Traditionally rice and products of its processing are used to cook porridge, pilaf, lettuce, confectionery, fish, dairy and meat products. At the same time new ways of its processing with releasing of protein products for more effective using, including the use of a glutenfree diet, are developing. The task of this study was a comparative research of nutrition and biological value and functional properties of protein and protein-calcium concentrates produced from rice flour milled from white and brown rice. The traditional and special methods were used. Concentrates were isolated with enzyme preparations of xylanase and amylolytic activity with the next dissolution of protein in diluted hydrochloric acid. Concentrates differed in the content of mineral substances (calcium, zinc, iron and other elements, amino acids and functional properties. The values of the functional properties and indicators of the nutritional value of concentrates from white rice show the advisability of their using in food products, including gluten-free products prepared on the basis of the emulsion and foam systems, and concentrates from brown rice in food products prepared on the basis of using of the emulsion systems. Protein concentrates of brown rice have a low foaming capacity and there is no foam stability at all.

Uptake of radionuclide thorium by twelve native plants grown in uranium mill tailings soils from south part of China

International Nuclear Information System (INIS)

Yan, Xun

2016-01-01

Highlights: • Screen dominant plants grown in uranium mill tailings soils. • Quantify the content of "2"3"2Th of soil samples from uranium mill tailings. • Quantify the transfer factor, bioconcentration factor and phytoremediation factor. • Screen out the plant species capable of remediating radionuclide contaminated soils. • Guide the reuse of study area in future. - Abstract: The concentrations of thorium ("2"3"2Th) in soil from a uranium mill tailings repository in South China were analyzed. The results showed that all the soil samples were acidic and the concentrations of "2"3"2Th in all the soil samples were more than the natural radionuclide content in soil of China. Through the field investigation, twelve kinds of dominant plants were discovered. The total quantity of "2"3"2Th in the whole plant is highest in rice flat sedge. We also found that Miscanthus floridulus has the greatest transfer factor (TF) for "2"3"2Th, rice flat sedge has the greatest bioconcentration factor (BF) for "2"3"2Th. At the mean time, M. floridulus has the greatest phytoremediation factor (PF) for "2"3"2Th. On the basis of the above conclusions and the definition for hyperaccumulator, rice flat sedge and M. floridulus could be the candidates of phytoremediation for radionuclide "2"3"2Th in the soil.

Uptake of radionuclide thorium by twelve native plants grown in uranium mill tailings soils from south part of China

Energy Technology Data Exchange (ETDEWEB)

Yan, Xun, E-mail: m13836295186@163.com

2016-08-01

Highlights: • Screen dominant plants grown in uranium mill tailings soils. • Quantify the content of {sup 232}Th of soil samples from uranium mill tailings. • Quantify the transfer factor, bioconcentration factor and phytoremediation factor. • Screen out the plant species capable of remediating radionuclide contaminated soils. • Guide the reuse of study area in future. - Abstract: The concentrations of thorium ({sup 232}Th) in soil from a uranium mill tailings repository in South China were analyzed. The results showed that all the soil samples were acidic and the concentrations of {sup 232}Th in all the soil samples were more than the natural radionuclide content in soil of China. Through the field investigation, twelve kinds of dominant plants were discovered. The total quantity of {sup 232}Th in the whole plant is highest in rice flat sedge. We also found that Miscanthus floridulus has the greatest transfer factor (TF) for {sup 232}Th, rice flat sedge has the greatest bioconcentration factor (BF) for {sup 232}Th. At the mean time, M. floridulus has the greatest phytoremediation factor (PF) for {sup 232}Th. On the basis of the above conclusions and the definition for hyperaccumulator, rice flat sedge and M. floridulus could be the candidates of phytoremediation for radionuclide {sup 232}Th in the soil.

Determination of total strontium in uruguayan rice by inductively coupled plasma optical emission spectrometry (ICP-OES

Directory of Open Access Journals (Sweden)

Mario E. Rivero Huguet

2011-04-01

Full Text Available Strontium (Sr is found naturally as a non-radioactive element and has 16 known isotopes. Naturally occurring Sr is found as four stable isotopes: Sr-84, -86, -87, and -88. Twelve other isotopes are radioactive. Sr-90 is the most important radioactive isotope in the environment, discovered mostly after the nuclear experiments conducted in the 1950s and 1960s. In the present work, 86 rice samples (Oryza saliva L. and 7 rice husk samples were digested by dry ashing for the purpose of determining the total Sr levels by ICP-OES. The mean concentrations found were: 0.281 µg g-1 for milled, 0.287 µg g-1 for parboiled milled, 0.564 µg g-1 for brown, 0.73 µg g-1 for parboiled brown, and 1.16 µg g-1 for paddy rice, and 3.44 µg g-1 for the rice husks. Validation of the method was conducted with a certified reference material, NIST CAM 8418 Wheat Gluten, and the recovery obtained ranged from 89-98%. As the outer layers (aleurone, pericarp of the grain are removed, the Sr concentration decreases. It can then be assumed that most of the Sr is stored in these layers. Although no extensive data exist for Sr levels in rice, the values obtained are in good agreement with the results reported for Sr in brown rice from Japan (0.25-0.72 µg g-1 and with non-contaminated foodstuffs from other parts of the world. Thus, the Uruguayan rice has Sr levels that match non-contaminated samples and its consumption presents no health threat.Publicado en: Atomic Spectroscopy.-- 2006, 27(3:80-85

Influence of rice straw polyphenols on cellulase production by Trichoderma reesei.

Science.gov (United States)

Zheng, Wei; Zheng, Qin; Xue, Yiyun; Hu, Jiajun; Gao, Min-Tian

2017-06-01

In this study, we found that during cellulase production by Trichoderma reesei large amounts of polyphenols were released from rice straw when the latter was used as the carbon source. We identified and quantified the phenolic compounds in rice straw and investigated the effects of the phenolic compounds on cellulase production by T. reesei. The phenolic compounds of rice straw mainly consisted of phenolic acids and tannins. Coumaric acid (CA) and ferulic acid (FA) were the predominant phenolic acids, which inhibited cellulase production by T. reesei. When the concentrations of CA and FA in the broth increased to 0.06 g/L, cellulase activity decreased by 23% compared with that in the control culture. Even though the rice straw had a lower tannin than phenolic acid content, the tannins had a greater inhibitory effect than the phenolic acids on cellulase production by T. reesei. Tannin concentrations greater than 0.3 g/L completely inhibited cellulase production. Thus, phenolic compounds, especially tannins are the major inhibitors of cellulase production by T. reesei. Therefore, we studied the effects of pretreatments on the release of phenolic compounds. Ball milling played an important role in the release of FA and CA, and hot water extraction was highly efficient in removing tannins. By combining ball milling with extraction by water, the 2-fold higher cellulase activity than in the control culture was obtained. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Release of Polyphenols Is the Major Factor Influencing the Bioconversion of Rice Straw to Lactic Acid.

Science.gov (United States)

Chen, Xingxuan; Xue, Yiyun; Hu, Jiajun; Tsang, Yiu Fai; Gao, Min-Tian

2017-11-01

In this study, we found that p-coumaric acid (p-CA), ferulic acid (FA), and condensed tannins were released from rice straw during saccharification. The presence of polyphenols prolonged the lag phase and lowered the productivity of lactic acid. p-CA was identified as a key inhibitor. Tannins had a lower inhibitory effect than p-CA; FA had little inhibitory effect. Acid, alkaline, and ball milling pretreatments elicited different levels of polyphenol release from rice straw. Due to the different levels of polyphenol release in the pretreatment step, the enzymatic hydrolysates contained different concentrations of polyphenols. Compared with fermentation with a synthetic medium, fermentation with the hydrolysates of ball-milled rice straw provided much lower productivity and yield of lactic acid due to the presence of polyphenols. Removal of these compounds played an important role in lactic acid fermentation. When rice straw was alkaline pretreated, the hydrolysates contained few phenolic compounds, resulting in high productivity and yield of lactic acid (1.8 g/L/h and 26.7 g/100 g straw), which were comparable to those in a synthetic medium. This indicates that there is a correlation between removal of phenolic compounds and efficiency in lactic acid fermentation.

Improved amylose content of rice (IR72) induced through gamma radiation

International Nuclear Information System (INIS)

Barrida, Adelaida C.; Rivera, Faye G.; Manrique, Mary Jayne C.; Dimaano, Arvin O.; Costimiano, Eduardo C.

2015-01-01

In general grain quality and quality preferences vary across rice growing countries and regions. Filipinos preferres translucent, well milled, long grain rice with aroma and minimal broken grains which is soft after cooling. The amylose content of rice starch is a major eating quality factor. The aim of this study is to develop rice mutants with good eating quality and low to intermediate amylose content through induced mutation using gamma radiation. Low to intermediate amylose content in rice were identified and selected among the advance generation lines irradiated with 200 and 300Gy dose of gamma radiation. Screening was done using qualitative method (Iodine staining method). Selected lines were analyzed quantitatively, to determine the percent amylose content. Percent amylose were group to several categories where; 0-6% is waxy, 6-12% is very low, 12-18% is low, 18-24% is intermediate and >25% is high. Results were further confirmed using molecular marker technique by looking at the waxy gene which code for granule bound starch synthase I (GBSSI) and controls amylose content in rice. Among the 30 lines selcted and anaylzes, 2 lines were confirmed to have a gene base mutation with a low to intermediate amylose content. Thus, induced mutation using gamma radiation has successfully improved amylose content in rice (IR72). (author)

Evaluation of Simultaneous Exposure to Flour Dust and Airborne Fungal Spores in Milling Plant

Directory of Open Access Journals (Sweden)

Alireza Dehdashti

2016-01-01

Full Text Available Background and Objectives: Wheat flour as an organic allergen particle has an extensive respiratory exposure in milling industry and related industries. Simultaneous exposure to flour dust and fungal spores causes infectious disease, cancers, and impaired pulmonary function tests. This research was carried out with the aim of assessing the concentration of respirable flour particles, determining the type, and concentration of fungal spores in breathing air of workers in milling industries. Methods: In this descriptive cross-sectional study, 42 area samples were collected on filter and analyzed gravimetrically. Using a specific sampling pump, sampling of bioaerosols and sabro dextrose agar medium of fungal spores, was performed. Microscopic analysis was applied to detect and quantify microorganisms as colony per cubic meter. Results: The mean and standard deviation of total respirable particles in the breathing air of workers was 6/57±1/69mg/m3, which exceeded occupational exposure limit. The concentration of fungal spores in workers’ breathing air ranged from 42 to 310 colony per cubic meter. The percentage of respirable to total dust particles produced in sieve vibration, bagging, and milling sections, were determined 67.83%, 32%, and 62.2%, respectively. Conclusion: The results of this study revealed that the concentration of respirable particles in wheat milling process exceeded the recommended level and the concentration of fungal spores was at the average level of occupational exposure according to ACGIH recommendation. Therefore, engineering controls are required in flour milling process to reduce the exposure of workers.

The protection and compensation of workers employed in the uranium mining industry in Australia

International Nuclear Information System (INIS)

McNamara, P.

1983-01-01

The hazards associated with uranium mining are outlined. The extent to which the law has provided for the protection of Australian uranium mine and mill workers from avoidable injury is examined. The single most significant step taken towards adequate protection of workers from the dangers of excessive exposure to ionising radiation was the approval of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980). The extent to which existing compensatory mechanisms, both common law and statutory, provide for the compensation of uranium mine and mill workers who sustain diseases peculiar to their employment is also examined. The capacity of the law to deal with cancers and other diseases of long latency periods is discussed

Physiological changes in largemouth bass exposed to paper mill effluents under laboratory and field conditions

Science.gov (United States)

Sepulveda, M.S.; Gallagher, E.P.; Gross, T.S.

2004-01-01

We report here on studies designed to asses the effects of paper mill effluents on non-reproductive functions of free-ranging and captive Florida largemouth bass (Micropterus salmoides floridanus) This was accomplished by conducting an outdoor tank study, in which fish were exposed to well water or to 10%, 20%, 40%, and 80% full strength effluent for 28 or 56 days, and by sampling largemouth bass from sites within the St. Johns River, Florida, upstream and downstream from a paper mill plant. Blood and plasma samples from fish from the tank study and from fish sampled from the ambient sites were analyzed for over 20 variables. We also determined liver and spleen weights and examined them histologically. The most significant finding from the tank study was an increase in the concentration of albumin and hepatosomatic index for bass exposed to ???20% effluents for 56 days. Spleenosomatic index and number of melanomacrophage centers were decreased in bass from effluent-dominated sites (Palatka and Rice Creek), whereas concentrations of calcium, phosphorous, glucose, and creatinine were elevated in fish from these sites, compared to fish from reference streams. Fish from Rice Creek also had fewer red blood cells, and male bass from Palatka had lower concentrations of cholesterol. Plasma concentrations of albumin and hepatic concentrations of glutathione were elevated in males from Palatka, and both females and males from Rice Creek had higher concentrations of globulin. These results indicate a complex pattern of effects of paper mill effluents on several physiological functions. However, despite the myriad of treatment and site-related effects, most physiological parameters fell within normal ranges when compared to reports on largemouth bass and other freshwater species.

Effect of Azolla Based - Organic Fertilizer, Rock Phosphate and Rice Hull Ash on Rice Yield and Chemical Properties of Alfisols

Directory of Open Access Journals (Sweden)

Sudadi

2014-07-01

Full Text Available The application of chemical fertilizer for long time may adverse soil environment. Organic agriculture, for example combination use of azolla based-organic fertilizer, phosphate rock and rice hull ash, was one of ways that able to recover it. Research was conducted in Sukosari, Jumantono, Karanganyar while soi chemical properties analysis was analysed in Soil Chemistry and Fertility Laboratory, Fac. of Agriculture, Sebelas Maret University April to November 2013. Research design used was RAKL with 5 treatments, each repeated 5 times. The treatments applied were P0 (control, P1 ( azola inoculum dosage 250 g/m2 + phosphate rock + rice hull ash equal to 150 kg/ha KCl, P2 (azola inoculum dosage 500 g/m2 + phosphate rock equal to 150kg/ha, SP-36 + rice hull ash equal to 100 kg/ha KCl, P3 (manure dosage of 5 ton/ha,P4 (Urea 250 kg/ha + SP-36 150 kg/ha + KCl 100 kg/ha. Data analysed statistically by F test (Fisher test with level of confident 95% followed by DMRT (Duncan Multiple Range Test if any significant differences. The result showed that the treatment combination of azolla, phosphate rock and rice hull ash increase soil organic matter content, cation exchange capacity, available-P and exchangeable-K as well as rice yield ( (at harvest-dry grain weight and milled-dry grain weight.

Breeding of a sake yeast mutant with enhanced ethyl caproate productivity in sake brewing using rice milled at a high polishing ratio.

Science.gov (United States)

Takahashi, Toshinari; Ohara, Yusuke; Sueno, Kazuo

2017-06-01

Sake yeast produces a fruity flavor known as ginjo-ko-which is mainly attributable to ethyl caproate and isoamyl acetate-during fermentation in sake brewing. The production of these flavor components is inhibited by unsaturated fatty acids derived from the outer layer of rice as raw material. We isolated three mutants (hec2, hec3, and hec6) with enhanced ethyl caproate productivity in sake brewing using rice milled at a high polishing ratio from a cerulenin-resistant mutant derived from the hia1 strain, which shows enhanced isoamyl acetate productivity. The hec2 mutant had the homozygous FAS2 mutation Gly1250Ser, which is known to confer high ethyl caproate productivity. When the homozygous FAS2 mutation Gly1250Ser was introduced into strain hia1, ethyl caproate productivity was increased but neither this nor intracellular caproic acid content approached the levels observed in the hec2 mutant, indicating that a novel mutation was responsible for the high ethyl caproate productivity. We also found that the expression of EEB1 encoding acyl-coenzyme A:ethanol O-acyltransferase (AEATase) and enzymatic activity were increased in the hec2 mutant. These results suggest that the upregulation of EEB1 expression and AEATase activity may also have contributed to the enhancement of ethyl caproate synthesis from ethanol and caproyl-CoA. Our findings are useful for the brewing of sake with improved flavor due to high levels of isoamyl acetate and ethyl caproate. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

A vertical ball mill as a new reactor design for biomass hydrolysis and fermentation process

DEFF Research Database (Denmark)

de Assis Castro, Rafael Cunha; Mussatto, Solange I.; Conceicao Roberto, Inês

2017-01-01

A vertical ball mill (VBM) reactor was evaluated for use in biomass conversion processes. The effects of agitation speed (100–200 rpm), number of glass spheres (0–30 units) and temperature (40–46 °C) on enzymatic hydrolysis of rice straw and on glucose fermentation by a thermotolerant Kluyveromyces...

A review of semi-pilot scale study on the irradiation of rice in Malaysia

International Nuclear Information System (INIS)

Norimah Yusof; Razley Mohamad Nordin.

1986-08-01

A semi-pilot scale study of milled-rice preservation using gamma irradiation project was started in 1984. The project was aimed to study the possibility of using irradiation in reducing losses during storage. Rice samples were subjected to doses ranging from 0.2 to kGy and stored in stack under conditions similar to a typical rice godown. Rice sampling was done every three to six months to determine the effect of gamma irradiation over 2 years of storage. After 9 months storage, radiation was found to reduce insect infestation with no effect on nutritional value (P 0.05) i.e. reducing sugar, water content, amino acid profile and fat acidity. However gel viscosity was markedly reduced with increase in radiation dose and storage time. Packaging materials (gunny sack, heavy duty plastic, woven laminated and woven non-laminated plastic) did not influence both chemical and physical quality of irradiated stored rice. (author)

The sorption of lead(II) ions on rice husk ash.

Science.gov (United States)

Naiya, Tarun Kumar; Bhattacharya, Ashim Kumar; Mandal, Sailendranath; Das, Sudip Kumar

2009-04-30

Present study deals with the adsorption of Pb(II) from aqueous solution on rice husk ash. Rice husk is a by-product generally obtained from rice mill. Rice husk ash is a solid obtained after burning of rice husk. Batch studies were performed to evaluate the influences of various experimental parameters like pH, initial concentration, adsorbent dosage, contact time and the effect of temperature. Optimum conditions for Pb(II) removal were found to be pH 5, adsorbent dosage 5 g/L of solution and equilibrium time 1h. Adsorption of Pb(II) followed pseudo-second-order kinetics. The effective diffusion coefficient is of the order of 10(-10)m(2)/s. The equilibrium adsorption isotherm was better described by Freuindlich adsorption isotherm model. The adsorption capacity (q(max)) of rice husk ash for Pb(II) ions in terms of monolayer adsorption was 91.74 mg/g. The change of entropy (DeltaS(0)) and enthalpy (Delta H(0)) were estimated at 0.132 kJ/(mol K) and 28.923 kJ/mol respectively. The negative value of Gibbs free energy (Delta G(0)) indicates feasible and spontaneous adsorption of Pb(II) on rice husk ash. The value of the adsorption energy (E), calculated using Dubinin-Radushkevich isotherm, was 9.901 kJ/mol and it indicated that the adsorption process was chemical in nature. Application study was also carried out to find the suitability of the process in waste water treatment operation.

Characterization and Preparation of Broken Rice Proteins Modified by Proteases

Directory of Open Access Journals (Sweden)

Lixia Hou

2010-01-01

Full Text Available Broken rice is an underutilized by-product of milling. Proteins prepared from broken rice by treatments with alkaline protease and papain have been characterized with regard to nutritional and functional properties. The protein content and the protein recovery were 56.45 and 75.45 % for alkaline protease treatment, and 65.45 and 46.32 % for papain treatment, respectively. Protease treatment increased the lysine and valine content, leading to a more balanced amino acid profile. Broken rice proteins had high emulsifying capacity, 58.3–71.6 % at neutral pH, and adequate water holding capacity, ranging from 1.96 to 2.93 g/g of proteins. At pH=7.0, the broken rice protein had the highest water holding capacity and the best interfacial activities (emulsifying capacity, emulsifying stability, foaming capacity and foaming stability, which may be the result of the higher solubility at pH=7.0. The interfacial activities increased with the increase in the mass fraction of broken rice proteins. The proteins prepared by the papain treatment had higher water holding capacity (p>0.05, emulsifying capacity (p0.05 than alkaline protease treatment at the same pH or mass fraction. To test the fortification of food products with broken rice proteins, pork sausages containing the proteins were prepared. Higher yield of the sausages was obtained with the increased content of broken rice proteins, in the range of 2.0–9.0 %. The results indicate that broken rice proteins have potential to be used as the protein fortification ingredient for food products.

75 FR 28295 - Cummins Filtration, Including On-Site Leased Workers From Manpower and Spherion Staffing...

Science.gov (United States)

2010-05-20

.... The Department has determined that workers from Spherion Staffing were sufficiently under the control..., Including On-Site Leased Workers From Manpower and Spherion Staffing, Including On-Site Workers From Hagemeyer North America, Lake Mills, IA; Amended Certification Regarding Eligibility To Apply for Worker...

Selected properties of particleboard panels manufactured from rice straws of different geometries

Science.gov (United States)

Xianjun Li; Zhiyong Cai; Jerrold E. Winandy; Altaf H. Basta

2010-01-01

The objective is to evaluate the primary mechanical and physical properties of particleboard made from hammer-milled rice straw particles of six different categories and two types of resins. The results show the performance of straw particleboards is highly dependent upon the straw particle size controlled by the opening size of the perforated plate inside the hammer-...

Responses of Rapid Viscoanalyzer Profile and Other Rice Grain Qualities to Exogenously Applied Plant Growth Regulators under High Day and High Night Temperatures.

Directory of Open Access Journals (Sweden)

Shah Fahad

Full Text Available High-temperature stress degrades the grain quality of rice; nevertheless, the exogenous application of plant growth regulators (PGRs might alleviate the negative effects of high temperatures. In the present study, we investigated the responses of rice grain quality to exogenously applied PGRs under high day temperatures (HDT and high night temperatures (HNT under controlled conditions. Four different combinations of ascorbic acid (Vc, alpha-tocopherol (Ve, brassinosteroids (Br, methyl jasmonates (MeJA and triazoles (Tr were exogenously applied to two rice cultivars (IR-64 and Huanghuazhan prior to the high-temperature treatment. A Nothing applied Control (NAC was included for comparison. The results demonstrated that high-temperature stress was detrimental for grain appearance and milling qualities and that both HDT and HNT reduced the grain length, grain width, grain area, head rice percentage and milled rice percentage but increased the chalkiness percentage and percent area of endosperm chalkiness in both cultivars compared with ambient temperature (AT. Significantly higher grain breakdown, set back, consistence viscosity and gelatinization temperature, and significantly lower peak, trough and final viscosities were observed under high-temperature stress compared with AT. Thus, HNT was more devastating for grain quality than HDT. The exogenous application of PGRs ameliorated the adverse effects of high temperature in both rice cultivars, and Vc+Ve+MejA+Br was the best combination for both cultivars under high temperature stress.

Prospects of rice straw as a raw material for paper making.

Science.gov (United States)

Kaur, Daljeet; Bhardwaj, Nishi Kant; Lohchab, Rajesh Kumar

2017-02-01

Pulp and paper mills are indispensable for any nation as far as the growth of the nation is concerned. Due to fast growth in population, urbanization and industrialization, the demand and consumption of paper has increased tremendously. These put high load on our natural resources and force the industry to look for alternative raw material. Rice straw is a lignocellulosic material abundantly available in wood short countries like China, India, Bangladesh, etc. and can be used as raw material for this industry. Open burning of rice straw releases noxious green house gases to the air and poses serious threats to global air chemistry and human health. So, it is a dual benefit option (for farmers and industries) to use rice straw as a raw material in pulp and paper industry. Organosolv pulping using acids are the prominent choices of researchers to convert this residue into valuable pulp but in developed countries only. Developing world favours the soda and soda-AQ processes as these are economical. As a virtue of less lignin content in comparison to wood, rice straw requires less harsh conditions for cooking and can be easily pulped. Bleaching is a crucial step of paper making but also responsible for causing water pollution. Many studies revealed that during the process more than 500 chlorinated compounds are released that are highly toxic, bioaccumulative and carcinogenic in nature. Most of the industries over the globe switch on to the elemental chlorine free short sequence bleaching methods using chlorine dioxide, hypochlorite and hydrogen peroxide. This paper presented the effective need of ecofriendly, economically reliable pulping and bleaching sequences in case of rice straw to eliminate the problems of chlorinated compounds in wastewater of paper mills. Such approach of using waste as a raw material with its environmentally safe processing for making paper can prove to be valuable towards sustainable growth. Copyright © 2016 Elsevier Ltd. All rights reserved.

Self-enhancement of GABA in rice bran using various stress treatments.

Science.gov (United States)

Kim, Hyun Soo; Lee, Eun Jung; Lim, Seung-Taik; Han, Jung-Ah

2015-04-01

Gamma-aminobutyric acid (GABA) may be synthesized in plant tissues when the organism is under stressful conditions. Rice bran byproduct obtained from the milling of brown rice was treated under anaerobic storage with nitrogen at different temperatures (20-60 °C) and moisture contents (10-50%) up to 12h. For the GABA synthesis, the storage at 30% moisture content and 40 °C appeared optimal. Utilisation of an electrolyzed oxidizing water (EOW, pH 3.3) for moisture adjustment and addition of glutamic acid increased the GABA content in rice bran. The maximum GABA content in rice bran (523 mg/100g) could be achieved by the anaerobic storage at 30% EOW for 5h at 40 °C after an addition of glutamic acid (5mM). This amount was approximately 17 times higher than that in the control (30 mg/100g). The use of EOW also prevented bacterial growth by decreasing the colony counts almost by half. Copyright © 2014 Elsevier Ltd. All rights reserved.

Infrared stabilization of rice bran and its effects on γ-oryzanol content, tocopherols and fatty acid composition.

Science.gov (United States)

Yılmaz, Neşe; Tuncel, Necati Barış; Kocabıyık, Habib

2014-06-01

Rice bran is a nutritionally valuable by-product of paddy milling. In this study an experimental infrared (IR) stabilization system was developed to prevent rice bran rancidity. The free fatty acid content of raw and IR-stabilized rice bran samples was monitored every 15 days during 6 months of storage. In addition, energy consumption was determined. The free fatty acid content of rice bran stabilized at 600 W IR power for 5 min remained below 5% for 165 days. No significant change in γ-oryzanol content or fatty acid composition but a significant decrease in tocopherol content was observed in stabilized rice bran compared with raw bran. IR stabilization was found to be comparable to extrusion with regard to energy consumption. IR stabilization was effective in preventing hydrolytic rancidity of rice bran. By optimizing the operational parameters of IR stabilization, this by-product has the potential for use in the food industry in various ways as a value-added commodity. © 2013 Society of Chemical Industry.

Evaluating the genotoxic effects of workers exposed to lead using micronucleus assay, comet assay and TCR gene mutation test

International Nuclear Information System (INIS)

Chen Zhijian; Lou Jianlin; Chen Shijie; Zheng Wei; Wu Wei; Jin Lifen; Deng Hongping; He Jiliang

2006-01-01

To evaluate the genotoxic effects of lead (Pb) exposure, 25 workers in a workplace producing storage battery were monitored for three genetic end-points using micronucleus (MN) assay, comet assay and TCR gene mutation test. Twenty-five controls were matched with workers according to age, gender and smoking. The air Pb concentration in the workplace was 1.26 mg/m 3 . All subjects were measured for Pb concentration of blood by atom absorption spectrophotometry. The mean Pb concentration of blood in workers (0.32 mg/l) was significantly higher than that in controls (0.02 mg/l). The results of MN test showed that the mean micronuclei rate (MNR) and mean micronucleated cells rate (MCR) in workers were 9.04 ± 1.51 per mille and 7.76 ± 1.23 per mille , respectively, which were significantly higher than those (2.36 ± 0.42 per mille and 1.92 ± 0.31 per mille ) in controls (P -4 and 1.74 ± 0.17 x 10 -4 , respectively, there was no significant difference between workers and controls (P > 0.05). The results of our study indicated that the genetic damage was detectable in 25 workers occupationally exposed to lead

Production of sake from rice material exposed to γ-radiation and technical development for its production. Characterization of low-dose exposed rice and small-scale brewing with it

International Nuclear Information System (INIS)

Samuta, Takashi; Aramaki, Isao; Hashizume, Katsumi

1997-01-01

The effects of γ-ray radiation have been studied on rice materials for sake production. Previous studies showed that the radiation caused to decrease the viscosity as well as the gelatinization heat of those rice and also decrease the chain length of amylose in its endosperm starch. Therefore, it is possible that a new kind sake with excellent quality might be produced by exposing raw material to radiation at an appropriate dose. Here, it was demonstrated that even a low-dose radiation with γ-ray may change various properties of rice including milling characteristics, water absorbing capacity, digestibility, viscosity etc. However, the characteristics as to fermentation were not affected so much and significant changes were observed only in the degree of coloring of the products. The effects of radiation on the constituents of sake were found to be comparatively small. For the production of matured sake, γ-ray radiation was evaluated to be much effective, because the period of maturation was significantly shortened by using irradiated rice material. Thus, a fragrant matured-like sake could be easily produced from γ-ray radiated rice. There remains a trouble in the coloring of the product. (M.N.)

Studies on the properties of rice-husk-filled-PP composites: effect of maleated PP

Directory of Open Access Journals (Sweden)

Simone Maria Leal Rosa

2009-09-01

Full Text Available Rice husk is a by-product of rice milling process that usually finds inadequate final disposal (burning, land filling. Thermoplastics composites filled with rice husk flour are materials that offer an alternative for using this agricultural resource viewing the production of low dense materials with some specific properties. In this work composites of polypropylene (PP and rice husk flour (RHF were prepared by melt extrusion. Maleic anhydride-modified PP (MAPP was added as a coupling agent. It was verified that tensile strength decreased with filler loading. The presence of MAPP improved this property showing a strong dependence on the MAPP/RHF ratio (MAPP/RHF = 0.03 produced the best results. The density of the composites slightly increased with filler and coupling agent in comparison to pure PP. The presence of MAPP diminished more than 20% water uptake in highly-loaded composites.

Application of the Dose Limitation System to the Mining and Milling of Radioactive Ores

International Nuclear Information System (INIS)

1987-01-01

This publication is one of the Safety Guides to the Code of Practice on Radiation Protection of Workers in the Mining and Milling of Radioactive Ores, 1983 Edition, which was published as a joint IAEA/ILO/WHO publication (IAEA Safety Series No.26). This Safety Guide is intended to demonstrate as well as facilitate the application of the principles of optimization in the control of risk among the workers engaged in the mining and milling of radioactive ores and to give some guidance on suitable technology. The International Atomic Energy Agency, jointly with the World Health Organization, the International Labour Organisation and the OECD Nuclear Energy Agency, published the Basic Safety Standards for Radiation Protection, 1982 Edition (IAEA Safety Series No. 9). The Basic Safety Standards outline the principles of radiation protection and also the basic requirements to be followed in the implementation of radiation protection control. These principles are further developed in the case of mining and milling of radioactive ores in the joint IAEA/ILO/WHO Code of Practice on Radiation Protection of Workers in the Mining and Milling of Radioactive Ores (IAEA Safety Series No. 26). This Safety Guide on the Application of the Dose Limitation System to the Mining and Milling of Radioactive Ores was prepared by an Advisory Group which met for the first time in Portoroz, Yugoslavia, from 22 to 26 August 1983, and then again from 6 to 10 August 1984, in Vienna. Following the second Advisory Group meeting the draft was further reviewed by A. Dory from Canada who also was a participant of the two Advisory Group meetings held earlier. After the consultant's review the draft was circulated among the members of the Advisory Group for a further check. The final version of the draft was prepared by the Secretariat with the help of a consultant

Effect of Cold-Water Irrigation on Grain Quality Traits in japonica Rice Varieties from Yunnan Province, China

Directory of Open Access Journals (Sweden)

Guo-zhen ZHAO

2009-09-01

Full Text Available The response of grain quality traits to cold-water irrigation and its correlation with cold tolerance were studied in 11 japonica rice varieties from Yunnan Province, China. The results indicated that the response of grain quality traits to the cold-water stress varied with rice varieties and grain quality traits. Under the cold-water stress, grain width, chalky rice rate, whiteness, 1000-grain weight, brown rice rate, taste meter value, peak viscosity, trough viscosity, breakdown viscosity and final viscosity significantly decreased, whereas grain length-width ratio, head rice rate, alkali digestion value, protein content and setback viscosity markedly increased. However, the other traits such as grain length, amylose content, milled rice rate, peak viscosity time and pasting temperature were not significantly affected by the cold-water stress. Significant correlations were discovered between phenotypic acceptability and cold response indices of taste meter value, protein content, peak viscosity and breakdown viscosity. Therefore, it would be very important to improve the cold tolerance of Yunnan rice varieties in order to stabilize and improve their eating quality.

EFFECTS OF VARIOUS STABILIZATION TECHNIQUES ON THE NUTRITIONAL QUALITY AND ANTIOXIDANT POTENTIAL OF BREWER’S RICE

Directory of Open Access Journals (Sweden)

NIK NOR ADILAH MUHAMAD NORDIN

2014-06-01

Full Text Available Brewer’s rice is a nutritionally rich by-product of rice milling industries but remained unutilized due to its high susceptibility to lipid oxidation. Thus, it is desirable to develop certain strategies to stabilize the brewer’s rice for food application. In the present study, the effects of microwave heating, gamma irradiation, and chemical (hydrochloric acid treatments in stabilizing brewer’s rice were investigated. Result showed that microwave-heated brewer’s rice contained lower FFA content as compared with control and irradiation. However, FFA content in brewer’s rice increased significantly (p < 0.05 during storage for all methods, except for hydrochloric acid (HCl treatment. All the stabilizations methods showed non-significant (p < 0.05 effect on protein, fat, and ash content. However, microwave and chemical treatment significantly (p < 0.05 reduced moisture content. All methods showed no significant (p < 0.05 reduction on phenolic contents but significantly (p < 0.05 reduced the γ-oryzanol and α-tocopherol contents. Microwave heating was able to reduce the oxidation of brewer’s rice without affecting other bioactive molecules present in brewer’s rice. Therefore, microwave heating can be considered as the most suitable technique for stabilizing brewer’s rice.

Radiation hazards of uranium mining and milling

International Nuclear Information System (INIS)

Fry, R.M.

1975-09-01

This paper examines each of the radiological problems that arise in these processes and explains their scientific background. The major operational requirement is to ensure that exposure of miners over their working lives to radon and its daughter products does not lead to an unacceptable increase in their chance of contracting lung cancer. Studies on the incidence of lung cancer amongst underground uranium miners indicate that this risk will be small if lifetime exposures are kept below about 120 'working level months', even amongst underground miners who smoke cigarettes. The risk is much smaller again for miners who do not smoke cigarettes. Other hazards that must be controlled are exposure of miners and mill workers to external radiation and to dusts containing long-lived radioactive alpha emitting isotopes. Finally, the solid waste products from the mill (the tailings) which contain most of the naturally occurring radioactivity, must be properly impounded and after closure of the mill, stabilized to ensure long-term containment. Access by the public to the stabilized tailings must be controlled and habitation within the controlled area prohibited. (author)

Radioactive cesium deposition on rice, wheat, peach tree and soil after nuclear accident in Fukushima

International Nuclear Information System (INIS)

Nakanishi, T.M.; Kobayashi, N.I.; Tanoi, K.

2013-01-01

We present how radioactive Cs was deposited on wheat, rice, peach tree and soil after nuclear accident in Fukushima. The deposition of radioactive Cs was found as spots at the surface of the leaves, branch or trunk of the trees, as well as in soil using one of the imaging method, autoradiography. The deposited radioactive Cs was not easily washed out, even with the treatment of acid solution. When the wheat was harvested 2 months after the accident, high radioactivity of Cs was found only on the leaves developed and expanded at the time of the accident. In the case of the rice grain, most of the radioactivity was found in bran and the radioactivity was drastically reduced in milled rice. Most of the radioactive Cs accumulation in rice plants was estimated from the absorption of the Cs ion dissolved in water, rather than Cs adsorbed in soil. (author)

Performance, Economics and Potential Impact of Perennial Rice PR23 Relative to Annual Rice Cultivars at Multiple Locations in Yunnan Province of China

Directory of Open Access Journals (Sweden)

Guangfu Huang

2018-04-01

Full Text Available Perennial grain crops hold the promise of stabilizing fragile lands, while contributing grain and grazing in mixed farming systems. Recently, perennial rice was reported to successfully survive, regrow, and yield across a diverse range of environments in Southern China and Laos, with perennial rice PR23 being identified as a prime candidate for release to farmers. This paper reports the evaluation of PR23 for release, by (1 comparing its survival, regrowth, performance, and adaptation with preferred annual rices across nine ecological regions in southern Yunnan Province of China; (2 examining the economic costs and benefits of perennial versus annual rice there; and (3 discussing the evidence for the release of PR23 as a broadly adapted and acceptable cultivar for farmers. Overall, the grain yield of PR23 was similar to those of the preferred annual rice cultivars RD23 and HXR7, but the economic analysis indicated substantial labour savings for farmers by growing the perennial instead of the annual. PR23 was comparable to the annuals in phenology, plant height, grain yield, and grain size, and was acceptable in grain and cooking quality. Farmers were keen to grow it because of reduced costs and especially savings in labour. PR23 is proposed for release to farmers because of its comparable grain yields to annual rices, its acceptable grain and milling quality, its cost and labour savings, and the likely benefits to soil stability and ecological sustainability, along with more flexible farming systems.

Exposure-response relations of alpha-amylase sensitisation in British bakeries and flour mills

OpenAIRE

Nieuwenhuijsen, M. J.; Heederik, D.; Doekes, G.; Venables, K. M.; Newman, T

1999-01-01

OBJECTIVES: To describe the levels of exposure to fungal alpha-amylase in British bakeries and flour mills, and to describe the relation between exposure to alpha-amylase and sensitisation to fungal alpha- amylase. METHODS: 495 personal flour dust samples were taken in seven British bakeries and flour mills and analysed for alpha-amylase with an immunoassay. Workers at the sites were asked to fill out questionnaires on work related symptoms, smoking history, and work history, and they w...

The prevalence of byssinosis among cotton workers in the north of Benin.

Science.gov (United States)

Hinson, A V; Schlünssen, V; Agodokpessi, G; Sigsgaards, T; Fayomi, B

2014-10-01

Cotton is the main agricultural export product in Benin. Cotton dust is thus present in the air during the handling and processing of cotton. This dust contains a mixture of substances including ground up plant matter, fibres, bacteria, fungi, soil, pesticides, noncotton matter, and other contaminants. While cotton processing is decreasing in industrialized countries, it is increasing in developing countries. Cotton processing, particularly in the early processes of spinning, can cause byssinosis. To determine the respiratory effects of cotton dust exposure among cotton mill workers in Benin. In a cross-sectional study, 109 workers exposed to cotton dust and 107 unexposed workers were studied. The International Commission on Occupational Health (ICOH) questionnaire was used for data collection on respiratory symptoms. For each worker, crossshift pulmonary function was performed with a dry spirometer. Based on the severity of respiratory symptoms and spirometry byssinosis was defined and classified according to the criteria of Schilling, et al. The mean ± SD age of the exposed and unexposed workers was 46.3 ± 7.8 and 37.0 ± 8.3 years, respectively (pcotton mill workers in Benin is high and needs prompt attention of health care workers and policymakers.

Consumer Acceptance and Preference Study (CAPS) on brown and undermilled Indian rice varieties in Chennai, India.

Science.gov (United States)

Sudha, Vasudevan; Spiegelman, Donna; Hong, Biling; Malik, Vasanti; Jones, Clara; Wedick, Nicole M; Hu, Frank B; Willett, Walter; Bai, Mookambika Ramya; Ponnalagu, Muthu Mariyammal; Arumugam, Kokila; Mohan, Viswanathan

2013-01-01

To study consumer acceptance of unmilled brown and undermilled rice among urban south Indians. Overweight and normal weight adults living in slum and nonslum residences in Chennai participated (n = 82). Bapatla (BPT) and Uma (red pigmented) rice varieties were chosen. These rice varieties were dehusked (unmilled, 0% polish) and further milled to 2.3% and 4.4% polishing (undermilled). Thus, 9 rice samples in both raw and parboiled forms were provided for consumer tasting over a period of 3 days. A 7-point hedonic scale was used to rate consumer preferences. A validated questionnaire was used to collect demographic, anthropometric, medical history, physical activity, dietary intake data, and willingness of the consumers to switch over to brown rice. Consumers reported that the color, appearance, texture, taste, and overall quality of the 4.4% polished rice was strongly preferred in both varieties and forms. Ratings for 0% polished (brown rice) were substantially lower than those of 2.3% polished rice, which were intermediate in ratings between 0% and 4.4% polishing. However, most of the consumers (93%) expressed a willingness to substitute brown or 2.3% polished rice, if affordable, after the taste tests and education on nutritional and health benefits of whole grains. Though most consumers preferred polished white rice, education regarding health benefits may help this population switch to brown or undermilled rice. Cooking quality and appearance of the grains were perceived as the most important factors to consider when purchasing rice among Chennai urban adults.

Genetic improvement of rice (oryza sativa l.) by induced mutations

International Nuclear Information System (INIS)

Suarez, E.; Deus, J. E.; Perez, R.; Alfonso, R.; Hernandez, R.; Avila, J.; Hernandez, J. L.; Puldon, Violeta; Duany, A.; Reinoso, J.; Mesa, H.; Rodriguez, S.

2001-01-01

In 1989 was initiated at Rice Research Institute of Cuba, a mutation breeding programme, in order to obtain new germoplasm with improved characters such as milling quality, earliness, resistance to the Hoja Blanca virus disease and salt tolerance. Seven varieties has been irradiated and two different sources of radiation were used: gamma rays from 60Co and fast neutrons of a 14 MeV neutron generator. In 1995, was released the variety IACuba 23 for low inputs conditions. Another four varieties IACuba 21, IACuba 22, IACuba 27 and IACuba 28 are in validation trials in rice production areas under irrigated condition. The last two have showed resistance to Steneotarsonemus spinki. Also, a group of mutants was selected to be used as parents. These mutants have been used in 953 crosses

Effects of Low Light on Agronomic and Physiological Characteristics of Rice Including Grain Yield and Quality

Directory of Open Access Journals (Sweden)

Qi-hua LIU

2014-09-01

Full Text Available Light intensity is one of the most important environmental factors that determine the basic characteristics of rice development. However, continuously cloudy weather or rainfall, especially during the grain-filling stage, induces a significant loss in yield and results in poor grain quality. Stress caused by low light often creates severe meteorological disasters in some rice-growing regions worldwide. This review was based on our previous research and related research regarding the effects of low light on rice growth, yield and quality as well as the formation of grain, and mainly reviewed the physiological metabolism of rice plants, including characteristics of photosynthesis, activities of antioxidant enzymes in rice leaves and key enzymes involved in starch synthesis in grains, as well as the translocations of carbohydrate and nitrogen. These characteristics include various grain yield and rice quality components (milling and appearance as well as cooking, eating and nutritional qualities under different rates of shading imposed at the vegetative or reproductive stages of rice plants. Furthermore, we discussed why grain yield and quality are reduced under the low light environment. Next, we summarized the need for future research that emphasizes methods can effectively improve rice grain yield and quality under low light stress. These research findings can provide a beneficial reference for rice cultivation management and breeding program in low light environments.

Evaluation of rice husk ash as filler in tread compounds

International Nuclear Information System (INIS)

Fernandes, M. R. S.; Furtado, C. R. G.; Sousa, A. M. F. de

2014-01-01

Rice which is one of the largest agriculture crops produces around 22% of rice rusk during its milling process. This material is mainly used as fuel for energy generation, which results in an ash, which disposal represents an environmental issue. The rice husk ash (RHA) contains over than 70% of silica in an amorphous form and a lot of applications is being developed for it all over the world. The use of silica as a filler in the tire industry is growing since it contributes significantly to the reduction of fuel consumption of the automobiles, allowing at the same time better traction (safety). This paper presents an evaluation of the use of RHA as filler in rubber tread compounds prepared in lab scale and compares its performance with compounds prepared with commercial silica and carbon black, the fillers normally used in tire industry. Mechanical and rheological properties are evaluated, with emphasis for tan delta as an indicator of tread performance related with rolling resistance (fuel consumption) and wet grip/traction (safety)

Evaluation of rice husk ash as filler in tread compounds

Energy Technology Data Exchange (ETDEWEB)

Fernandes, M. R. S., E-mail: monica.fernandes@lanxess.com [Lanxess Elastômeros do Brasil S.A., Brasil and Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ) (Brazil); Furtado, C. R. G., E-mail: russi@globo.com, E-mail: ana.furtado.sousa@gmail.com; Sousa, A. M. F. de, E-mail: russi@globo.com, E-mail: ana.furtado.sousa@gmail.com [Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ) (Brazil)

2014-05-15

Rice which is one of the largest agriculture crops produces around 22% of rice rusk during its milling process. This material is mainly used as fuel for energy generation, which results in an ash, which disposal represents an environmental issue. The rice husk ash (RHA) contains over than 70% of silica in an amorphous form and a lot of applications is being developed for it all over the world. The use of silica as a filler in the tire industry is growing since it contributes significantly to the reduction of fuel consumption of the automobiles, allowing at the same time better traction (safety). This paper presents an evaluation of the use of RHA as filler in rubber tread compounds prepared in lab scale and compares its performance with compounds prepared with commercial silica and carbon black, the fillers normally used in tire industry. Mechanical and rheological properties are evaluated, with emphasis for tan delta as an indicator of tread performance related with rolling resistance (fuel consumption) and wet grip/traction (safety)

Optimisation of near-infrared reflectance model in measuring protein and amylose content of rice flour.

Science.gov (United States)

Xie, L H; Tang, S Q; Chen, N; Luo, J; Jiao, G A; Shao, G N; Wei, X J; Hu, P S

2014-01-01

Near-infrared reflectance spectroscopy (NIRS) has been used to predict the cooking quality parameters of rice, such as the protein (PC) and amylose content (AC). Using brown and milled flours from 519 rice samples representing a wide range of grain qualities, this study was to compare the calibration models generated by different mathematical, preprocessing treatments, and combinations of different regression algorithm. A modified partial least squares model (MPLS) with the mathematic treatment "2, 8, 8, 2" (2nd order derivative computed based on 8 data points, and 8 and 2 data points in the 1st and 2nd smoothing, respectively) and inverse multiplicative scattering correction preprocessing treatment was identified as the best model for simultaneously measurement of PC and AC in brown flours. MPLS/"2, 8, 8, 2"/detrend preprocessing was identified as the best model for milled flours. The results indicated that NIRS could be useful in estimation of PC and AC of breeding lines in early generations of the breeding programs, and for the purposes of quality control in the food industry. Copyright © 2013 Elsevier Ltd. All rights reserved.

Romanian regulatory framework for uranium mining and milling (present and future)

International Nuclear Information System (INIS)

Rodna, A.L.; Dumitrescu, N.

2002-01-01

In Romania, all operations in the nuclear field, including uranium mining and milling, are regulated by Law no. 111/1996 (republished in 1998), regarding the safe conduct of nuclear activities. These activities can be performed only on the basis of an authorization released by the national regulatory authority, i.e. the National Commission for Nuclear Activities Control. The specific requirements which must be carried out by the owner of an operating licence for a uranium mining and milling operation are stipulated by the Republican Nuclear Safety Norms for Geological Research, Mining and Milling of Nuclear Raw Materials. These regulatory requirements have been in force since 1975. The regulatory norms include provisions that the effective dose limit for workers should not exceed 50 mSv/year and also that liquid effluents released into surface waters must have a content of natural radioactive elements that meets the standards for drinking water. The norms do not contain provisions concerning the conditions under which the mining sites and the uranium processing facilities can be shut down and decommissioned. The norms also do not contain requirements regarding either the rehabilitation of environments affected by abandoned mining and milling activities, nor criteria for the release of the rehabilitated sites for alternative uses. To implement the provisions of Council Directive 96/29 EURATOM in Romania, new Fundamental Radiological Protection Norms have been approved and will soon be published in the 'Monitorul Official' (Official Gazette of Romania). One of the main provisions of these norms is the reduction of the effective dose limit for the workers to 20 mSv/year. Changes in the Republican Nuclear Safety Norms for Geological Research, Mining and Milling of Nuclear Raw Materials, are also planned; these changes will be consistent with the Fundamental Radiological Protection Norms. To cover existing gaps, the new norms for uranium mining and milling will include

Scientific Evidence of Rice By-Products for Cancer Prevention: Chemopreventive Properties of Waste Products from Rice Milling on Carcinogenesis In Vitro and In Vivo

Directory of Open Access Journals (Sweden)

Bee Ling Tan

2017-01-01

Full Text Available Cancer is a significant global health concern affecting men and women worldwide. Although current chemopreventive drugs could inhibit the growth of cancer cells, they exert many adverse side effects. Dietary factor plays a crucial role in the management of cancers and has drawn the attention of researchers to be used as an option to combat this disease. Both in vitro and in vivo studies showed that rice and its by-products display encouraging results in the prevention of this disease. The mechanism of anticancer effect is suggested partly through potentiation of bioactive compounds like vitamin E, phytic acid, γ-aminobutyric acid (GABA, γ-oryzanol, and phenolics. Nevertheless, the bioactivity of rice and its by-products is still incompletely understood. In this review, we present the findings from a preclinical study both in in vitro and in animal experiments on the promising role of rice by-products with focus on cancer prevention.

Contamination of rice (Oryza sativa L) with Cadmium and Arsenic by irrigation with the Bogota River water in rice soils of the Lower Basin

International Nuclear Information System (INIS)

Montenegro, Omar; Mejia L

2001-01-01

In this study, field and greenhouse experiments were simultaneously carried out with rice (oryza sativa l., variedad oryzica-1) in soils of the Bogota River lower basin (Los Manueles Series, a member of the clayed, mixed, isohipertermic family of the Fluventic Vertic Haplustepts) to evaluate the effect of Cd and As content of the irrigation waters (of the Bogota River and greenhouse) on soils and: 1) rice growth physiological parameters; 2) Cd and As accumulated in different parts of rice plants; 3) yields and other aspects and properties of rice crop. The results lead to the following conclusions: 1) The Cd and As content of the Bogota River water, increased during the driest months and was minimum in those with the highest precipitation; Cd and As concentrations in both seasons surpassed the maximum permissible limits. 2) Rice height was highest when irrigation water does have neither Cd nor As. Effects of both elements showed an inverse lineal tendency. 3) The gradual increase of Cd in irrigation water reduced in 12.5% the number of grains per panicle; the increase of As induced a 10% reduction. 4) The highest concentration of Cd and As in irrigation waters significantly reduced yields; maximum yields l were obtained when Cd and As were absent from irrigation waters. 5) For any concentration of As in irrigation water the highest concentration of Cd was accumulated in rice leafs when concentration of Cd 2 was 2mg/l; above this value Cd accumulation in leafs el decreased with the gradual increase of As concentration. 6) Cd and As accumulated in rice grains increased with the gradual increment of both elements in the irrigation waters; Cd and As accumulated were respectively 50 and 15 times higher than the maximum critical levels proposed for rice grains. 7) Cd and As accumulated progressively on soils with gradual increase of both elements in irrigation waters 8) Cd and As concentration in irrigation waters apparently does not affect the rice mill behavior

Importance Role of Low-Cost Sorbent Produced from rice husk in Separation of zirconium from yttrium

International Nuclear Information System (INIS)

Kandil, S.A.

2013-01-01

The agricultural waste, rice husk, was used as a precursor for the production of low-cost sorbent. Rice husk, a by-product of the rice milling industry, accounts for about 20 % of the whole rice. The argro-residue sorbent extracted from rice husk was employed in separation of zirconium from yttrium. The separation of Zr from the binary systems (Zr-Y) was achieved in batch and column modes. In a batch mode, the adsorption behavior was studied in deferent media, namely, hydrochloric acid, 0.1 M citrate buffer and 0.1 M acetate buffer. In addition, other factors affecting the sorption process of each metal e.g. ph-value of the medium and metal ion concentration were also studied. The breakthrough experiments were carried in the form of mini-column with different bed depths of sorbent at flow rates of 20 ml/min and 40 ml/min. These studies were performed to elucidate the valuable of use of locally, available, agro-residue for separation of Zr from Y target as a promising sorbent for purification of 88 Zr, 89 Zr from Y.

Radiation risk, medical surveillance programme and radiation protection in mining and milling of uranium ores

International Nuclear Information System (INIS)

Rakshit, A.K.

1991-01-01

Mining and milling of uranium ores comprise multiple operations such as developement, drilling, blasting, handling, crushing, grinding, leaching of the ore and concentration, drying, packaging and storing of the concentrate product. Apart from the hazards of any metal mining and milling operations due to dust, noise, chemicals, accidents etc there are radiation risks also resulting from exposure to airborne radioactivity and external radiation. The inhalation risk is of more concern in underground mines than in open pit mines. The objective of a Medical Surveillance Programme (an occupational Health Programme) is to ensure a healthy work force. It should ultimately lead to health maintenance and improvement, less absenteeism increased productivity and the achievement of worker and corporate goals. The programme includes prevention, acute care, counselling and rehabilitation. Radiological workers require special monitoring for their work-related radiation exposure effect by film monitoring service, whole body counting and bioassay. Radiation protection in the mining and milling of Uranium ores include the use of personal protective equipment, work station protection, personal hygiene and house keeping. (author). 15 refs

Preparation of Silicon by Calcium Reduction of Purified Rice Husk Ash

International Nuclear Information System (INIS)

Swe Zin Tun

2011-12-01

This research has studied on the possibility of production and preparation of silicon powder from rice husk ash (RHA) as raw material. RHA from gasifier, a waste product of the rice mill is rich in silica which contains 90.43% of silica. RHAs were purified by precipitation method using 1.5N, 2N, 2.5N and 3N of sodium hydroxide solution and 4.5N, 5N, 5.5N and 6.5N of sulphuric acid solution. The highest yield percent of silica was given by using 2.5N sodium hydroxide solution and 5N sulphuric acid solution X-ray fluoresence (XRF), X-rays diffraction (HRD) and Fourier transform infrared (FTRI) spectra were applied for determination of mineral content and chemical bonding in extracted silica and rice husk ash. Metallothermic reduction of purified extracted silica with calcium was investigated within the temperacture range of 700-900 C. The reduction product was characterized by XRD, XRF and scanning electron microcopy (SEM). The effect of temperature and reaction time in which reduction process was studied in this research.

Effect of black rice husk ash on the physical and rheological properties of bitumen

Science.gov (United States)

Romastarika, Raissa; Jaya, Ramadhansyah Putra; Yaacob, Haryati; Nazri, Fadzli Mohamed; Agussabti, Ichwana, Jayanti, Dewi Sri

2017-08-01

Black rice husk ash (BRHA) waste product is inexpensive and can be obtained from rice mills. Reuse of waste product is ideal to reduce pollution, because disposal is decreased or eliminated. The commercial value of BRHA has increased, and it is suitable for use in road construction. In this study, BRHA waste was ground using a grinding ball mill for 120 min to form fine powder. BRHA was then sieved to less than 75 µm. At the laboratory, BRHA was mixed with bitumen to replace 2%, 4%, and 6% of the total weight, whereas 0% represented the control sample. The penetration, softening point, dynamic shear rheometer (DSR) and rolling thin film oven (RTFO) were investigated in this study. Results showed that bitumen became harder, whereas the rate of penetration decreased when the replacement amount of BRHA increased. Softening point test of bitumen also revealed an increase. The short-term aging test revealed that modification of bitumen could relieve the effect of aging. BRHA waste added into bitumen improved the performance of bitumen. Therefore, the usage of BRHA could help improve the performance of road pavement and reduce the rutting effect.

Environmental factors associated with baseline and serial changes in fractional exhaled nitric oxide (FeNO) in spice mill workers.

Science.gov (United States)

Van der Walt, Anita; Baatjies, Roslynn; Singh, Tanusha; Jeebhay, Mohamed F

2016-09-01

This study evaluated the determinants of high fractional exhaled nitric oxide (FeNO; >50 ppb) and serial changes in FeNO over a 24-hour period in spice mill workers at risk of work-related allergic respiratory disease and asthma. A cross-sectional study of 150 workers used European Community Respiratory Health Survey (ECRHS) questionnaires, Phadiatop, serum-specific IgE (garlic, chilli pepper, wheat; Phadia, ImmunoCAP), spirometry and FeNO. A hand-held portable nitric oxide sampling device (NIOX MINO, Aerocrine AB) measured FeNO before and after the 8-hour shift and after 24 hours from baseline. The mean age of workers was 33 years; 71% were male, 46% current smokers and 45% atopic. Among workers with garlic sensitisation, 13% were monosensitised and 6% were co-sensitised to chilli pepper. Baseline preshift FeNO geometric mean (GM=14.9 ppb) was similar to the mean change across shift (GM=15.4 ppb) and across the 24-hour period (GM=15.8 ppb). In multivariate linear models, smoking (β=-0.507) and atopy (β=0.433) were strongly associated with FeNO. High FeNO (>50 ppb) was significantly associated with asthma-like symptoms due to spice dust (OR=5.38, CI 1.01 to 28.95). Sensitisation to chilli pepper was more strongly correlated with FeNO (r=0.32) and FeNO>50 ppb (OR=17.04, p=0.005) than garlic. FeNO increase (>12%) across 24 hours demonstrated a strong association with elevated exposures to spice dust particulate (OR=3.77, CI 1.01 to 14.24). This study suggests that chilli pepper sensitisation is associated with high FeNO (>50 ppb), more strongly compared with garlic, despite the low prevalence of sensitisation to chilli. Elevated inhalant spice dust particulate is associated with a delayed elevation of FeNO across the 24-hour period. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill

International Nuclear Information System (INIS)

Ksiazek, K; Wacke, S; Gorecki, T; Gorecki, Cz

2007-01-01

The effect of the milling parameters (rotation speed of the milling device and duration of milling) on the phase composition of the products of milling of fully crystalline selenium has been investigated. The milling was conducted using a planetary micromill and the phase composition of the milling products was determined by differential thermal analysis. It has been found that ball milling leads to the partial amorphization of the starting crystalline material. The content of amorphous phase in the milling products depends, in a rather complicated way, on the milling parameters. At the milling parameters adopted in the present study, the milling product was never fully amorphous. The complicated way the milling parameters affect the content of amorphous phase in the milling products is a result of competition of two processes: amorphization due to deformation and refinement of grains of milled material and crystallization of the already produced amorphous material at the cost of heat evolved in the milling vial during the milling process

Advocacy Week: A Model to Prepare Clinical Social Workers for Lobby Day

Science.gov (United States)

Kilbane, Teresa; Pryce, Julia; Hong, Philip Young P.

2013-01-01

Legislative advocacy is an important and long-standing skill in social work. However, this role cannot be left solely to social workers who specialize in macro and policy practice. Rather, clinical social workers who assist clients as they face "private" troubles (Mills, 1959) also need to face the structural barriers that contribute to…

Effect of Intermittent Drying Conditions on Fissuring Percentage and Process Duration of Long and Medium Rough Rice Varieties

Directory of Open Access Journals (Sweden)

A. Ghasemi

2016-02-01

Full Text Available One of the factors which affect the quality of rice during milling is internal fissures created during and after drying operation. In many industrial countries intermittent drying method is hired to reduce the moisture content of rough rice in order to reduce the drying time and maintain the quality of the final product. A high percentage of rice breakage during milling process, at least in Iran, necessitates performing the intermittent drying process and optimize it for Iranian varieties. In this study, the effect of this method (drying-tempering and continuous drying method (no tempering on fissuring percentage of Hashemi (long grain and Koohsar (medium grain varieties was investigated. The experiments were carried out at constant drying and tempering temperature of 60 °C, drying durations of 20, 40 and 60 min, and tempering durations of 0 (continuous drying, 40, 80, 120, 160, 200, 240 min. The results revealed that the tempering process significantly reduced the drying time and fissured kernels percentage. Moreover, for both varieties it was observed that the rice fissuring decreased significantly by continuing the tempering process until certain durations. Overall, for optimization of intermittent drying process in terms of the considered qualitative parameters, i.e. reducing energy consumption and losses, conducting 160 and 200 min tempering process after 40 min drying was found appropriate for Hashemi and Koohsar varieties, respectively. In addition, according to the higher fissuring for Koohsar (medium grain compared to Hashemi (long grain, it can be concluded that physical properties such as kernel slenderness ratio is effective on its fissuring.

FEV 1 , FVC, FEV 1 /FVVC as predictors of rhinitis among saw mill ...

African Journals Online (AJOL)

Data on sociodemographic variables, symptoms of rhinitis, etc was obtained using a modified semi structured British medical research council questionnaire while respiratory function data was measured using a spirometry. Result: A total of 400 responds comprising of 200 saw mill workers and 200 controls participated in ...

Effects of incorporating germinated brown rice on the antioxidant properties of wheat flour chapatti.

Science.gov (United States)

Gujral, H Singh; Sharma, P; Bajaj, R; Solah, V

2012-02-01

Brown rice after germinating for 24 and 48 h was milled into flour and incorporated in whole wheat flour at a level of 10% to prepare chapattis. The objective was to use chapatti as a delivery vehicle for germinated brown rice. The flour blends and chapattis made from the flour blends were evaluated for their antioxidant properties. Incorporating germinated brown rice flour increased the total phenolic content of the flour blend from 1897 to 2144 µg FAE/g. The total flavonoids content increased significantly from 632.3 to1770.9 µg CAE/g and metal chelating activity significantly increased by 71.62%. Antioxidant activity increased significantly by the addition of brown rice flour and addition of 24- and 48-h germinated brown rice flour further increased the antioxidant activity significantly. The total phenolic content and total flavonoids content decrease significantly in all the blends after baking the flour into chapatti. A decrease of 3% to 29% was observed in the total phenolic content and a decrease of 25% to 42% was observed in the total flavonoids content. However, baking of the flour blends into chapatti increased the reducing power, metal chelating activity by three folds and antioxidant activity from 64% to 104%.

Transfer of gaseous iodine from atmosphere to rough rice, brown rice and polished rice

International Nuclear Information System (INIS)

Sumiya, Misako; Uchida, Shigeo; Muramatsu, Yasuyuki; Ohmomo, Yoichiro; Yamaguchi, Shuho; Obata, Hitoshi.

1987-01-01

Experiments were carried out in order to obtain information required for establishing transfer coefficients of gaseous iodine (I 2 ) to rough rice, brown rice and polished rice. The gaseous iodine deposited on young rice plants before the heading period was scarcely found in the rough rice harvested at the full ripe stage. The biological half life of iodine in hull, however, was much slower than that in leaves of 14 days. The translocation of iodine from leaves and stalks to rough rice was not clearly recognized. Therefore, it was deduced that iodine found in brown rice mainly should originate from that deposited on the hull. The distribution ratios of iodine between rough rice and brown rice, and between brown rice and polished rice were 100:4 and 100:30 on 100 grains basis, respectively. If average normalized deposition velocity (V d(m) ) or derived deposition velocity (V s ) are given, the transfer coefficients of gaseous iodine to rough rice (TF r ), brown rice (TF b ) and polished rice (TF p ) could be calculated. (author)

Survey on Urinary Levels of Aflatoxins in Professionally Exposed Workers

Directory of Open Access Journals (Sweden)

Fulvio Ferri

2017-03-01

Full Text Available Feed mill workers may handle or process maize contaminated with aflatoxins (AFs. This condition may lead to an unacceptable intake of toxins deriving from occupational exposure. This study assessed the serological and urinary levels of AFs in workers exposed to potentially contaminated dusts in two mills. From March to April 2014, blood and urine samples were collected, on Monday and Friday morning of the same working week from 29 exposed workers and 30 non-exposed controls. AFs (M1, G2, G1, B1, B2 and aflatoxicol (AFOH A were analyzed. Each subject filled in a questionnaire to evaluate potential food-borne exposures to mycotoxins. AFs contamination in environmental dust was measured in both plants. No serum sample was found to be positive. Seventy four percent of urine samples (73.7% revealed AFM1 presence. AFM1 mean concentration was 0.035 and 0.027 ng/mL in exposed and non-exposed workers, respectively (p = 0.432; the concentration was slightly higher in Friday’s than in Monday’s samples, in exposed workers, 0.040 versus (vs. 0.031 and non-exposed controls (0.030 vs. 0.024, p = 0.437. Environmental AFs contamination ranged from 7.2 to 125.4 µg/kg. The findings of this study reveal the presence of higher AFs concentration in exposed workers than in non-exposed controls, although these differences are to be considered consistent with random fluctuations.

Development of Nutritious Snack from rice industry waste using twin screw extrusion

Directory of Open Access Journals (Sweden)

Sharma Renu

2016-01-01

Full Text Available Deoiled rice bran, a byproduct of rice milling industry was transformed into highly nutritious snack by the application of twin screw extrusion process. Response Surface Methodology (RSM with four- factor- five level central composite rotatable design (CCRD was employed to investigate the effects of extrusion conditions including moisture content of different raw flours, feed composition, barrel temperature and screw speed of extruder on properties of extrudates was studied. Second order quadratic regression model fitted adequately in the variation. The significance was established at P ≤ 0.05. The regression models can be used to interpret the effect of feed composition, moisture content, screw speed and barrel temperature on the properties of the final product. It was shown that higher rice bran in feed composition showed in minimum water absorption index and maximum water solubility index. Numerical optimization technique resulted in 123.83°C of barrel temperature, 294.68 rpm of screw speed, 13.94 % of feed moisture and 17.73 % of deoiled rice bran. The responses predicted for these optimum process conditions resulted water absorption index, 5.91468 g/g and water solubility index of 18.5553 % for the development of value added product with health benefits.

Preparation, aroma characteristics and volatile compounds of flavorings from enzymatic hydrolyzed rice bran protein concentrate.

Science.gov (United States)

Arsa, Supeeraya; Theerakulkait, Chockchai

2018-02-19

Rice bran is a by-product obtained from the rice milling industry. The aims of this research were to add value to rice bran by preparation of enzymatic hydrolyzed rice bran protein concentrate (HRPC) as a flavoring agent and the flavoring which was produced by HRPC has not been investigated. Different drying methods (freeze-drying and spray-drying) and fructose additions were studied for improvement of rice bran protein sensorial aroma characteristics. The most abundant amino acids in liquid HRPC (LH) were glutamic acid, arginine, aspartic acid and leucine. The intensity of desirable aromas, such as cereal-like, nut-like, milk-powder-like, sweet, and cocoa-like aroma, were higher in spray-dried HRPC powder (SHP) than in LH and freeze-dried HRPC. Volatile compounds, such as aldehydes, pyrazines and ketones, were significantly increased in HRPC powders in which fructose was added before spray-drying (SHP-F). Higher amounts of 2-methylbutanal, 3-methylbutanal, phenylacetaldehyde, 2,5-dimethylpyrazine, vanillin, 2-acetylpyrrole and maltol were detected in SHP-F. Moreover, these compounds had high odor active values, which accounted for the cocoa-like, sweet, nut-like, and milk-powder-like characteristics of SHP-F. These findings could lead to the creation of desirable aroma characteristics of rice bran protein concentrate by different preparation methods. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Estimating Inorganic Arsenic Exposure from U.S. Rice and Total Water Intakes.

Science.gov (United States)

Mantha, Madhavi; Yeary, Edward; Trent, John; Creed, Patricia A; Kubachka, Kevin; Hanley, Traci; Shockey, Nohora; Heitkemper, Douglas; Caruso, Joseph; Xue, Jianping; Rice, Glenn; Wymer, Larry; Creed, John T

2017-05-30

Among nonoccupationally exposed U.S. residents, drinking water and diet are considered primary exposure pathways for inorganic arsenic (iAs). In drinking water, iAs is the primary form of arsenic (As), while dietary As speciation techniques are used to differentiate iAs from less toxic arsenicals in food matrices. Our goal was to estimate the distribution of iAs exposure rates from drinking water intakes and rice consumption in the U.S. population and ethnic- and age-based subpopulations. The distribution of iAs in drinking water was estimated by population, weighting the iAs concentrations for each drinking water utility in the Second Six-Year Review data set. To estimate the distribution of iAs concentrations in rice ingested by U.S. consumers, 54 grain-specific, production-weighted composites of rice obtained from U.S. mills were extracted and speciated using both a quantitative dilute nitric acid extraction and speciation (DNAS) and an in vitro gastrointestinal assay to provide an upper bound and bioaccessible estimates, respectively. Daily drinking water intake and rice consumption rate distributions were developed using data from the What We Eat in America (WWEIA) study. Using these data sets, the Stochastic Human Exposure and Dose Simulation (SHEDS) model estimated mean iAs exposures from drinking water and rice were 4.2 μg/day and 1.4 μg/day, respectively, for the entire U.S. population. The Tribal, Asian, and Pacific population exhibited the highest mean daily exposure of iAs from cooked rice (2.8 μg/day); the mean exposure rate for children between ages 1 and 2 years in this population is 0.104 μg/kg body weight (BW)/day. An average consumer drinking 1.5 L of water daily that contains between 2 and 3 ng iAs/mL is exposed to approximately the same amount of iAs as a mean Tribal, Asian, and Pacific consumer is exposed to from rice. https://doi.org/10.1289/EHP418. Among nonoccupationally exposed U.S. residents, drinking water and diet are considered

The Prevalence of Byssinosis among Cotton Workers in the North of Benin

Directory of Open Access Journals (Sweden)

AV Hinson

2014-09-01

Full Text Available Background: Cotton is the main agricultural export product in Benin. Cotton dust is thus present in the air during the handling and processing of cotton. This dust contains a mixture of substances including ground up plant matter, fibres, bacteria, fungi, soil, pesticides, noncotton matter, and other contaminants. While cotton processing is decreasing in industrialized countries, it is increasing in developing countries. Cotton processing, particularly in the early processes of spinning, can cause byssinosis. Objective: To determine the respiratory effects of cotton dust exposure among cotton mill workers in Benin. Methods: In a cross-sectional study, 109 workers exposed to cotton dust and 107 unexposed workers were studied. The International Commission on Occupational Health (ICOH questionnaire was used for data collection on respiratory symptoms. For each worker, crossshift pulmonary function was performed with a dry spirometer. Based on the severity of respiratory symptoms and spirometry byssinosis was defined and classified according to the criteria of Schilling, et al. Results: The mean±SD age of the exposed and unexposed workers was 46.3±7.8 and 37.0±8.3 years, respectively (p<0.001. The mean FEV1 predicted value for the exposed and unexposed workers was 76.3% and 77.3%, respectively. The prevalence of grade 3 byssinosis was 21.1% (95% CI: 13.4–28.9 in exposed workers and 8.4% (95% CI: 3.1–13.7 in unexposed workers (p=0.006. On Mondays, the exposed workers had more respiratory symptoms than unexposed workers; for grade 3 byssinosis, the prevalence was 13.8% in exposed and 4.7% in unexposed workers (p=0.011. Conclusion: The prevalence of respiratory symptoms and byssinosis among cotton mill workers in Benin is high and needs prompt attention of health care workers and policymakers.

Uranium milling costs

International Nuclear Information System (INIS)

Coleman, R.B.

1980-01-01

Basic process flowsheets are reviewed for conventional milling of US ores. Capital costs are presented for various mill capacities for one of the basic processes. Operating costs are shown for various mill capacities for all of the basic process flowsheets. The number of mills using, or planning to use, a particular process is reviewed. A summary of the estimated average milling costs for all operating US mills is shown

Differences in Cellulosic Supramolecular Structure of Compositionally Similar Rice Straw Affect Biomass Metabolism by Paddy Soil Microbiota.

Directory of Open Access Journals (Sweden)

Tatsuki Ogura

Full Text Available Because they are strong and stable, lignocellulosic supramolecular structures in plant cell walls are resistant to decomposition. However, they can be degraded and recycled by soil microbiota. Little is known about the biomass degradation profiles of complex microbiota based on differences in cellulosic supramolecular structures without compositional variations. Here, we characterized and evaluated the cellulosic supramolecular structures and composition of rice straw biomass processed under different milling conditions. We used a range of techniques including solid- and solution-state nuclear magnetic resonance (NMR and Fourier transform infrared spectroscopy followed by thermodynamic and microbial degradability characterization using thermogravimetric analysis, solution-state NMR, and denaturing gradient gel electrophoresis. These measured data were further analyzed using an "ECOMICS" web-based toolkit. From the results, we found that physical pretreatment of rice straw alters the lignocellulosic supramolecular structure by cleaving significant molecular lignocellulose bonds. The transformation from crystalline to amorphous cellulose shifted the thermal degradation profiles to lower temperatures. In addition, pretreated rice straw samples developed different microbiota profiles with different metabolic dynamics during the biomass degradation process. This is the first report to comprehensively characterize the structure, composition, and thermal degradation and microbiota profiles using the ECOMICS toolkit. By revealing differences between lignocellulosic supramolecular structures of biomass processed under different milling conditions, our analysis revealed how the characteristic compositions of microbiota profiles develop in addition to their metabolic profiles and dynamics during biomass degradation.

A guide to ventilation requirements for uranium mines and mills. Regulatory guide G-221

International Nuclear Information System (INIS)

2003-06-01

The purpose of G-221 is to help persons address the requirements for the submission of ventilation-related information when applying for a Canadian Nuclear Safety Commission (CNSC) licence to site and construct, operate or decommission a uranium mine or mill. This guide is also intended to help applicants for a uranium mine or mill licence understand their operational and maintenance obligations with respect to ventilation systems, and to help CNSC staff evaluate the adequacy of applications for uranium mine and mill licences. This guide is relevant to any application for a CNSC licence to prepare a site for and construct, operate or decommission a uranium mine or mill. In addition to summarizing the ventilation-related obligations or uranium mine and mill licensee, the guide describes and discusses the ventilation-related information that licence applicants should typically submit to meet regulatory requirements. The guide pertains to any ventilation of uranium mines and mills for the purpose of assuring the radiation safety of workers and on-site personnel. This ventilation may be associated with any underground or surface area or premise that is licensable by the CNSC as part of a uranium mine or mill. These areas and premises typically include mine workings, mill buildings, and other areas or premises involving or potentially affected by radiation or radioactive materials. Some examples of the latter include offices, effluent treatment plants, cafeterias, lunch rooms and personnel change-rooms. (author)

Noise Induced Hearing Loss Among Cotton Textile and Carpet Mill Workers

OpenAIRE

ERTEM, Melikşah

1998-01-01

In industry increased mechanisation results in increased noise levels. Operation of textile machines carries a high risk of hearing loss. In this study the evaluation of textile worker's noise induced hearing loss was reviewed cross sectionally. The hearing of 260 textile workers exposed to noise levels between 85-95 dB(A) in carpet and cotton textile factories was assessed by means of air and bone conductance audiograms obtained. The subjects were grouped into five hearin...

Community-wise evaluation of rice beer prepared by some ethnic tribes of Tripura

Directory of Open Access Journals (Sweden)

Sushanta Ghosh

2016-12-01

Full Text Available Tripura is inhabited by many indigenous communities having unique ethno-socio-cultural lifestyle with age-old rice beer brewing techniques using wild herbs and local rice varieties popularly known as chuwak or zu. The present study is focused on comparative evaluation of brewing methods and nutritional aspects of rice beer among Debbarma, Jamatia, Koloi, and Molsom tribes of Tripura. Sample ingredients and plant species are properly identified before reporting. Rice beer is also prepared in laboratory conditions for comparative studies of qualitative and quantitative aspects. Thirteen different plant species are used by these four tribes for preparation of starter cultures using soaked rice flour. Markhamia stipulate (Wall. Seem. is common to all communities for starter cake preparation. Litsea monopetala (Roxb. Pers. is used by all three communities except Jamatia. The use of Ananus comosus Mill. is common among Debbarma and Jamatia tribes, whereas that of Artocarpus heterophyllus Lam. is common among Molsom and Koloi tribes. However, Aporusa diocia (Roxb. Muell., Combretum indicum (L. DeFilipps., and Citrus sinensis (L. Osbeck. are used only by Debbarma tribe for unique tangy flavor. The physicochemical properties of rice beer varied within tribes for its moisture content, carbohydrate content, reducing sugar, and alcohol percentage. The concentration of alcohol increases with aging and prolonged fermentation. The plants reported here are also reported for having nutritional and medicinal benefits for the metabolic stability in humans, which make the process more prospective for commercialization if a standard for maintaining a quality and associated risk can be determined.

Different Phosphorus Supplies Altered the Accumulations and Quantitative Distributions of Phytic Acid, Zinc, and Iron in Rice (Oryza sativa L.) Grains.

Science.gov (United States)

Su, Da; Zhou, Lujian; Zhao, Qian; Pan, Gang; Cheng, Fangmin

2018-02-21

Development of rice cultivars with low phytic acid (lpa) is considered as a primary strategy for biofortification of zinc (Zn) and iron (Fe). Here, two rice genotypes (XS110 and its lpa mutant) were used to investigate the effect of P supplies on accumulations and distributions of PA, Zn, and Fe in rice grains by using hydroponics and detached panicle culture system. Results showed that higher P level increased grain PA concentration on dry matter basis (g/kg), but it markedly decreased PA accumulation on per grain basis (mg/grain). Meanwhile, more P supply reduced the amounts and bioavailabilities of Zn and Fe both in milled grains and in brown grains. Comparatively, lpa mutant was more susceptive to exogenous P supply than its wild type. Hence, the appropriate P fertilizer application should be highlighted in order to increase grain microelement (Zn and Fe) contents and improve nutritional quality in rice grains.

Guidelines for the medical surveillance of atomic radiation workers

International Nuclear Information System (INIS)

1991-11-01

These guidelines are provided for the use and guidance of occupational physicians concerned with the medical surveillance of atomic radiation workers (ARWs). Persons employed in industries where there is exposure to ionizing radiation should be screened medically for fitness for certain jobs before starting such work and at appropriate intervals while employed. This includes workers at uranium mines, mills and refineries, nuclear fuel fabrication plants, nuclear power plants and research facilities, and facilities using radionuclides in an industrial setting. An important purpose of medical surveillance is to ensure that workers are fit both physically and psychologically to undertake the tasks they may be called upon to perform

Removal of Cd (II from Aqueous Media by Adsorption onto Chemically and Thermally Treated Rice Husk

Directory of Open Access Journals (Sweden)

María Camila Hoyos-Sánchez

2017-01-01

Full Text Available Chemically and thermally treated rice husks were evaluated as a potential decontaminant of toxic Cd (II in aqueous media. Rice husk (RH, a by-product from rice milling, was chemically treated with HCl and NaOH. Then, thermal treatments to 300, 500, and 700°C were applied. The chemical composition and morphological characteristics of RH were evaluated by different techniques. The specific surface area analysis of RH samples by BET nitrogen adsorption method provided specific surface areas ranging from 6 to 14 m2/g. SEM, FTIR, and EDX analyses of RH were carried out to determine the surface morphology, functional groups involved in metal binding mechanism, and C/O and C/Si ratios, respectively. The maximum Cd (II adsorption capacity was 28.27 mg/g at an optimum pH, 6.0. The kinetic studies revealed that adsorption process followed the pseudo-second-order kinetic model.

[The organization of the comprehensive prevention of urolithiasis among ferrous metallurgy workers].

Science.gov (United States)

Egorova, A M

2009-01-01

The purpose of study is to evaluate the effectiveness of the set of preventive measures as applied to 321 workers of basic ferrous metallurgy specialties (steel makers, mill men, hot metal shearers). During the clinical examination all the workers were divided on three groups: the workers without any pathology (11.83%, the first group), the workers with metabolic disorders only without urolitiasis (64.81%, the second group) and the workers with urolitiasis diagnosis approved by ultrasonography (23.36%, the third group). The effectiveness of rehabilitation measures was evaluated during half a year (diet therapy, drinking regimen, medicinal plants treatment). After the course of preventive measures was applied the overall health condition of most workers ameliorated and the number of workers with urolitiasis development risk factors reliably decreased up to 6-12%.

Lung health and heart rate variability changes in salt workers.

Science.gov (United States)

Glad Mohesh, M I; Sundaramurthy, A

2016-04-01

India is the third largest salt producing country in the World, with a global annual production of 230 million tonnes. Large number of salt workers get employed in these salt milling plants risking their life from the effects of salt. Recent foreign evidences reported that these salt workers are exposed to aerosol salt particles that disturb their lung and cardiovascular autonomic control. To compare the status of lung health, cardiovascular autonomic control and biochemical changes in a group of salt industry workers with that of the age-matched normal subjects. Volunteers of both sexes (25-35 years) were divided into Group I (n=10) controls and Group II (n=10) non-brine salt workers in salt milling plants. From fasting blood sample, complete blood count, plasma electrolyte and lipid profile estimation were done. After resting for 15min, blood pressure and lead II ECG were recorded. Spirometry was done using RMS Helios spirometer. Data collected were later analysed using GraphPad Prism 5.0 with statistical significance set at p4.0, 112.8±1.7, pindustry has shown a little or no impact on the respiratory system, however there are changes in the blood and cardiovascular system, which need to be further studied to understand the long-term influences of salt in this population. Copyright © 2015 Tuberculosis Association of India. Published by Elsevier B.V. All rights reserved.

Radiation protection of workers in mining and processing of uranium ore

International Nuclear Information System (INIS)

Khan, A.H.; Sahoo, S.K; Puranik, V.D.

2003-01-01

Low grade of uranium ore mined from three underground mines is processed in a mill at Jaduguda in eastern India to recover uranium concentrate in the form of yellow cake. Radiation protection of workers is given due importance at all stages of these operations. Dedicated Health Physics Units and Environmental Survey Laboratories established at the site regularly carry out in-plant and environmental surveillance to keep radiation exposure of workers and the members of public within the limits prescribed by the regulatory body. The limits set by the national regulatory body based on the international standards recommended by the ICRP and the IAEA are followed. In the uranium mines, external gamma radiation, radon and airborne activity due to radioactive dust are monitored. Similarly, in the uranium ore processing mill, gamma radiation and airborne radioactivity due to long-lived α-emitters are monitored. Personal dosimeters are also issued to workers. The total radiation exposure of workers from external and internal sources is evaluated from the area and personal monitoring data. It has been observed that the average radiation dose to workers has been below 10 mSvy -1 and all exposures are well below 20 mSvy -1 at all stages of operations. Adequate ventilation is provided during mining and ore processing operations to keep the concentrations of airborne radioactivity well below the derived limits. Workers use personal protective appliances, where necessary, as a supplementary means of control. The monitoring methodologies, results and control measures are presented in the paper. (author)

Manual on radiological safety in uranium and thorium mines and mills

International Nuclear Information System (INIS)

1976-01-01

The manual describes the personnel radiation hazards in uranium and thorium mines and mills. Measures which should be taken in order to protect the workers are outlined. The problems of air born radioactivity, external radiation, surface contamination and radioactive waste are treated. Safety standards in relation to the above mentioned subjects are given. An outline is given for monitoring programme. Monitoring methods, control methods and means of medical control are given

Mechanical alloying and reactive milling in a high energy planetary mill

International Nuclear Information System (INIS)

Jiang Xianjin; Trunov, Mikhaylo A.; Schoenitz, Mirko; Dave, Rajesh N.; Dreizin, Edward L.

2009-01-01

Powder refinement in a planetary mill (Retsch PM 400-MA) is investigated experimentally and analyzed using discrete element modeling (DEM). Refinement is defined as the average size of the individual components in a composite powder. The specific milling dose, defined as the product of charge ratio and milling time, is used as an experimental parameter tracking the progress of the material refinement. This parameter is determined experimentally for milling of boron and titanium powders, for which the time of initiation of a self-sustained reaction is measured under different milling conditions. It is assumed that the reaction becomes self-sustaining when the same powder refinement is achieved. The DEM calculations established that the milling balls primarily roll along the milling container's perimeter. The inverse of the rate of energy dissipation resulting from this rolling motion is used as the DEM analog of the specific milling dose. The results correlate well with experimental observations.

A preliminary study on the reduction of limonite ore by using rice husk as a reducing agent

Science.gov (United States)

Maksum, Ahmad; Husein, Michael Kelvin E.; Permana, Sulaksana; Rustandi, Andi; Wahyuadi Soedarsono, Johny

2018-03-01

The abundant of rice husk in Indonesia has encouraged researchers to study the feasibility of rice husk for substituting material that is more expensive or dangerous. In previous study, silica with a purity of 99.9% has been obtained from rice husk with calcinations process. Nevertheless, the gases resulting from the process were not used and left useless. Therefore, in this study, those gases derived from rice husk calcinations process were used as reducing agents during the ferronickel (Fe-Ni) production through a direct reduction process. The objective of this study was to investigate the effect of the amount of rice husk in the pellets on the increase of nickel content in the limonite reduction process. The limonite ore were crushed to the size of less than 150 mesh using disc-mill, and then were mixed with rice husk powder (10, 20, 30 in wt % mass) before being pelletized using bentonite as a binder. The resulted pellets were roasted at 500°C for 60 minutes and then quenched in water media. After drying process, the reduction process of 40g pellets was conducted at 1000°C for 90 minutes with 20g rice husk in furnace. The effects of additional rice husk on the direct reduction of limonite ore pellets were qualitatively analyzed by using X-ray powder diffraction (XRD) and quantitatively by Atomic absorption spectroscopy (AAS). Both analysis results showed that the reduction process followed the reaction scheme: Fe2O3→Fe3O4→FeO and NiO phase was detected in the sample with 20% rice husk addition. The optimum concentration of Ni 1.23% was obtained for 20% rice husk addition.

Biological characterization of radiation exposure and dose estimates for inhaled uranium milling effluents. Annual progress report April 1, 1982-March 31, 1983

International Nuclear Information System (INIS)

Eidson, A.F.

1984-05-01

The problems addressed are the protection of uranium mill workers from occupational exposure to uranium through routine bioassay programs and the assessment of accidental worker exposures. Comparisons of chemical properties and the biological behavior of refined uranium ore (yellowcake) are made to identify important properties that influence uranium distribution patterns among organs. These studies will facilitate calculations of organ doses for specific exposures and associated health risk estimates and will identify important bioassay procedures to improve evaluations of human exposures. A quantitative analytical method for yellowcake was developed based on the infrared absorption of ammonium diuranate and U 3 O 8 mixtures in KBr. The method was applied to yellowcake samples obtained from six operating mills. The composition of yellowcake from the six mills ranged from nearly pure ammonium diuranate to nearly pure U 3 O 8 . The composition of yellowcake samples taken from lots from the same mill was only somewhat less variable. Because uranium mill workers might be exposed to yellowcake either by contamination of a wound or by inhalation, a study of retention and translocation of uranium after subcutaneous implantation in rats was done. The results showed that 49% of the implanted yellowcake cleared from the body with a half-time (T sub 1/2) in the body of 0.3 days, and the remainder was cleared with a T sub 1/2 of 11 to 30 days. Exposures of Beagle dogs by nose-only inhalation to aerosols of commercial yellowcake were completed. Biochemical indicators of kidney dysfunction that appeared in blood and urine 4 to 8 days after exposure to the more soluble yellowcake showed significant changes in dogs, but levels returned to normal by 16 days after exposure. No biochemical evidence of kidney dysfunction was observed in dogs exposed to the less soluble yellowcake form. 18 figures, 9 tables

Energy and rice quality aspects during drying of freshly harvested paddy with industrial inclined bed dryer

International Nuclear Information System (INIS)

Sarker, M.S.H.; Ibrahim, M. Nordin; Ab. Aziz, N.; Mohd. Salleh, P.

2014-01-01

Highlights: • We presented performance evaluation approach for industrial inclined bed paddy dryer. • Specific electrical energy consumption was 1.44–1.95 MJ/kg water evaporated. • Specific thermal energy consumption was 2.77–3.47 MJ/kg water evaporated. • Dryer yielded 1–4% higher head rice at drying temperature of 38–39 °C than 41–42 °C. • Dryers should be operated at 38–39 °C for 1–4% higher head rice at reasonable energy. - Abstract: The performance evaluation of any industrial dryer regarding energy consumption and product quality should be assessed to check its present status and to suggest for further efficient operation. An investigation was carried out to evaluate the impact of drying temperature and air flow on energy consumption and quality of rice during paddy drying with industrial inclined bed dryer (IBD) with average holding capacity of 15 ton in the selected complexes of Padiberas Nasional Berhad (BERNAS)-the national paddy custodian of Malaysia. In reducing paddy moisture content (mc) from 22% to 23% wet basis (wb) down to around 12.5% wb, the final mc, the specific electrical (in terms of primary energy) and the specific thermal energy consumption were found to be varied between 1.44 to 1.95 MJ/kg water evaporated and 2.77 to 3.47 MJ/kg water evaporated, respectively. Analysis revealed that the specific electrical energy consumption was around 20% lesser and the specific thermal energy consumption of IBDs was around 10% higher during drying with air temperature of 41–42 °C than drying with 38–39 °C in reducing paddy mc from 22% to 23% (wb) down to around 12.5% (wb). However, paddy being with almost same initial mc dried using drying temperature of 38–39 °C, IBDs yielded 1–4% higher head rice yield while milling recovery and whiteness were comparable at acceptable milling degree and transparency. The bed air flows between 0.27 and 0.29 m 3 m −2 s −1 resulted in higher head rice yield slightly while its

Heat exposure, cardiovascular stress and work productivity in rice harvesters in India: implications for a climate change future.

Science.gov (United States)

Sahu, Subhashis; Sett, Moumita; Kjellstrom, Tord

2013-01-01

Excessive workplace heat exposures create well-known risks of heat stroke, and it limits the workers' capacity to sustain physical activity. There is very limited evidence available on how these effects reduce work productivity, while the quantitative relationship between heat and work productivity is an essential basis for climate change impact assessments. We measured hourly heat exposure in rice fields in West Bengal and recorded perceived health problems via interviews of 124 rice harvesters. In a sub-group (n = 48) heart rate was recorded every minute in a standard work situation. Work productivity was recorded as hourly rice bundle collection output. The hourly heat levels (WBGT = Wet Bulb Globe Temperature) were 26-32°C (at air temperatures of 30-38°C), exceeding international standards. Most workers reported exhaustion and pain during work on hot days. Heart rate recovered quickly at low heat, but more slowly at high heat, indicating cardiovascular strain. The hourly number of rice bundles collected was significantly reduced at WBGT>26°C (approximately 5% per°C of increased WBGT). We conclude that high heat exposure in agriculture caused heat strain and reduced work productivity. This reduction will be exacerbated by climate change and may undermine the local economy.

Synthesis of low-cost adsorbent from rice bran for the removal of reactive dye based on the response surface methodology

Science.gov (United States)

Hong, Gui-Bing; Wang, Yi-Kai

2017-11-01

Rice bran is a major by-product of the rice milling industry and is abundant in Taiwan. This study proposed a simple method for modifying rice bran to make it a low-cost adsorbent to remove reactive blue 4 (RB4) from aqueous solutions. The effects of independent variables such as dye concentration (100-500 ppm), adsorbent dosage (20-120 mg) and temperature (30-60 °C) on the dye adsorption capacity of the modified rice bran adsorbent were investigated by using the response surface methodology (RSM). The results showed that the dye maximum adsorption capacity of the modified rice bran adsorbent was 151.3 mg g-1 with respect to a dye concentration of 500 ppm, adsorbent dosage of 65.36 mg, and temperature of 60 °C. The adsorption kinetics data followed the pseudo-second-order kinetic model, and the isotherm data fit the Langmuir isotherm model well. The maximum monolayer adsorption capacity was 178.57-185.19 mg g-1, which was comparable to that of other agricultural waste adsorbents used to remove RB4 from aqueous solutions in the literature. The thermodynamics analysis results indicated that the adsorption of RB4 onto the modified rice bran adsorbent is an endothermic, spontaneous monolayer adsorption that occurs through a physical process.

Effects of Nitrogen Application Time on Caryopsis Development and Grain Quality of Rice Variety Yangdao 6

Directory of Open Access Journals (Sweden)

Fei XIONG

2008-03-01

Full Text Available A pot experiment was conducted to study the effects of different nitrogen application time (during the tillering or the booting stages with the same nitrogen rates on the caryopsis development and grain quality of rice variety Yangdao 6. The increased nitrogen fertilizer (urea, especially applied during the booting stage, could evidently increase the milled rice rate, head rice rate and protein content in rice grains compared with the control (no nitrogen application, and decrease chalky grain rate and amylose content. Moreover, the increased nitrogen fertilizer significantly affected the caryopsis development and enhanced the grain weight when nitrogen applied during the tillering and the booting stages, especially during the booting stage. During caryopsis development the increased nitrogen fertilizer applied during the tillering and booting stages could obviously decrease the total starch and amylose contents, but not obviously for the amylopectin content in rice grain. Increased topdressing of nitrogen fertilizer, especially applied during the booting stage, had significant effect on the development and structures of amyloplasts and proteinoplasts. That is, it could change the distribution, number and shape of amyloplasts and proteinoplasts in the endosperm cells especially in grain abdomen. Compared with the control the arrangements of amyloplasts and proteinoplasts were closer, with more numbers, higher density and less interspaces each ohter. Furthermore, most amyloplasts showed polyhedron under the increased nitrogen fertilizer level.

The impact of elevated CO2 and temperature on grain quality of rice grown under open-air field conditions.

Science.gov (United States)

Jing, Liquan; Wang, Juan; Shen, Shibo; Wang, Yunxia; Zhu, Jianguo; Wang, Yulong; Yang, Lianxin

2016-08-01

Rising atmospheric CO2 is accompanied by global warming. However, interactive effects of elevated CO2 and temperature have not been well studied on grain quality of rice. A japonica cultivar was grown in the field using a free-air CO2 enrichment facility in combination with a canopy air temperature increase system in 2014. The gas fumigation (200 µmol mol(-1) above ambient CO2 ) and temperature increase (1 °C above ambient air temperature) were performed from tillering until maturity. Compared with the control (ambient CO2 and air temperature), elevated CO2 increased grain length and width as well as grain chalkiness but decreased protein concentrations. In contrast, the increase in canopy air temperature had less effect on these parameters except for grain chalkiness. The starch pasting properties of rice flour and taste analysis of cooked rice indicated that the palatability of rice was improved by CO2 and/or temperature elevation, with the combination of the two treatments showing the most significant changes compared with ambient rice. It is concluded that projected CO2 in 2050 may have larger effects on rice grain quality than the projected temperature increase. Although deterioration in milling suitability, grain appearance and nutritional quality can be expected, the taste of cooked rice might be better in the future environment. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Growth performance and economics of sheep production with ...

African Journals Online (AJOL)

A twelve-week feeding trial was conducted using sixteen (16) growing Uda lambs to determine the growth performance of sheep fed varying levels of rice milling waste. Diets containing graded levels of rice milling waste replacing wheat offal at 15, 30 and 45% inclusion levels were formulated. Diet without rice milling waste ...

HS-SPME-GC-MS/MS Method for the Rapid and Sensitive Quantitation of 2-Acetyl-1-pyrroline in Single Rice Kernels.

Science.gov (United States)

Hopfer, Helene; Jodari, Farman; Negre-Zakharov, Florence; Wylie, Phillip L; Ebeler, Susan E

2016-05-25

Demand for aromatic rice varieties (e.g., Basmati) is increasing in the US. Aromatic varieties typically have elevated levels of the aroma compound 2-acetyl-1-pyrroline (2AP). Due to its very low aroma threshold, analysis of 2AP provides a useful screening tool for rice breeders. Methods for 2AP analysis in rice should quantitate 2AP at or below sensory threshold level, avoid artifactual 2AP generation, and be able to analyze single rice kernels in cases where only small sample quantities are available (e.g., breeding trials). We combined headspace solid phase microextraction with gas chromatography tandem mass spectrometry (HS-SPME-GC-MS/MS) for analysis of 2AP, using an extraction temperature of 40 °C and a stable isotopologue as internal standard. 2AP calibrations were linear between the concentrations of 53 and 5380 pg/g, with detection limits below the sensory threshold of 2AP. Forty-eight aromatic and nonaromatic, milled rice samples from three harvest years were screened with the method for their 2AP content, and overall reproducibility, observed for all samples, ranged from 5% for experimental aromatic lines to 33% for nonaromatic lines.

γ-Oryzanol, tocol and mineral compositions in different grain fractions of giant embryo rice mutants.

Science.gov (United States)

Jeng, Toong Long; Shih, Yi Ju; Ho, Pei Tzu; Lai, Chia Chi; Lin, Yu Wen; Wang, Chang Sheng; Sung, Jih Min

2012-05-01

Rice embryo is concentrated with lipid, protein and some bioactive chemicals. Two rice mutants IR64-GE and TNG71-GE (M7 generation) were characterised by an enlarged embryo compared with their wild types. In the present study, distributions of protein, lipid, total phenolics, γ-oryzanol, tocols and some essential minerals in these two giant embryo mutants and their respective normal embryo wild types IR64 and TNG71 were compared. The embryo dry weights of giant embryo mutants IR64-GE and TNG71-GE were 0.92 and 1.32 mg per seed respectively. These values were higher than those of their respective normal embryo genotypes (0.50 and 0.62 mg per seed). Large variations in protein, lipid, phenolic, γ-oryzanol, tocol and minerals levels were found between mutant and wild-type pairs. The brown rice of TNG71-GE had higher total γ-oryzanol (average of 24% increase) and total tocol (average of 75% increase) levels than TNG71, IR64 and IR64-GE. The embryo and bran parts of giant embryo mutant TNG71-GE were found to be good sources of vitamin E and γ-oryzanol. Therefore it could be used to produce high-value by-products from milled embryo and bran parts and as a genetic resource for rice improvement programmes. TNG71-GE can also be used as a nutrient-fortified rice cultivar. Copyright © 2011 Society of Chemical Industry.

Identification of genetic loci underlying the kernel fissure-resistance exhibited by 'cypress' and 'saber'

Science.gov (United States)

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce broken grains that result from the dehusking and milling processes One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it ...

Impacts of new environmental and safety regulations on uranium mining, milling and waste management in China

International Nuclear Information System (INIS)

Wang Yongping; Zheng Yuhui; Shi Xiangjun

2001-01-01

Nuclear power progress has triggered the development and innovation of nuclear fuel industries in China. At present the Chinese government has put more emphasis on industrial readjustment and technical innovation in uranium mining and milling in order to fuel the nuclear power development, satisfy environmental protection and improve economic efficiency of the industry. The current organizations and approval procedure for establishing regulations and the implementation and consequences of the regulations, technical polices and development strategies concerning uranium mining, milling, treatment of waste ores and mill tailings, and reduction of the workers' suffered exposure dose etc. in China are discussed and the economic, health and environmental impacts of the uranium mining and metallurgy with reformation achievement and the introduction of advanced technologies such as the in-situ leaching and heap leaching mining technologies are assessed in this paper. (author)

Spherical composite particles of rice starch and microcrystalline cellulose: A new coprocessed excipient for direct compression

OpenAIRE

Limwong, Vasinee; Sutanthavibul, Narueporn; Kulvanich, Poj

2004-01-01

Composite particles of rice starch (RS) and microcrystalline cellulose were fabricated by spray-drying technique to be used as a directly compressible excipient. Two size fractions of microcry stalline cellulose, sieved (MCS) and jet milled (MCJ), having volumetric mean diameter (D50) of 13.61 and 40.51 μm, respectively, were used to form composite particles with RS in various mixing ratios. The composite particles produced were evaluated for their powder and compression properties. Although ...

Uranium-mill appraisal program

International Nuclear Information System (INIS)

Everett, R.J.; Cain, C.L.

1982-08-01

The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

Prevention and control of tuberculosis in workplaces: how knowledgeable are the workers in Bangladesh?

Science.gov (United States)

Islam, Qazi Shafayetul; Islam, Md Akramul; Islam, Shayla; Ahmed, Syed Masud

2015-12-24

The National Tuberculosis (TB) Control Programme (NTP) of Bangladesh succeeded in achieving the dual targets of 70 % case detection and 85 % treatment completion as set by the World Health Organization. However, TB prevention and control in work places remained largely an uncharted area for NTP. There is dearth of information regarding manufacturing workers' current knowledge, attitudes and practices (KAP) on pulmonary TB which is essential for designing a TB prevention and control programme in the workplaces. This study aimed to fill-in this knowledge gap. This cross-sectional survey was done in multiple workplaces like garment factories, jute mills, bidi/tobacco factories, flour mills, and steel mills using a multi-stage sampling procedure. Data on workers' KAP related to pulmonary TB were collected from 4800 workers in face-to-face interview. The workers were quite knowledgeable about symptoms of pulmonary TB (72 %) and free- of-cost sputum test (86 %) and drug treatment (88 %), but possessed superficial knowledge regarding causation (4 %) and mode of transmission (48 %). Only 11 % knew about preventive measures e.g., taking BCG vaccine and/or refraining from spitting here and there. Knowledge about treatment duration (43 %) and consequences of incomplete treatment (11 %) was poor. Thirty-one percent were afraid of the disease, 21 % would feel embarrassed (and less dignified) if they would have TB, and 50 % were afraid of isolation if neighbours would come to know about it. Workers with formal education (AOR 1.92; 95 % CI 1.61, 2.29) and exposure to community health workers (CHW) (AOR 31.60; 95 % CI 18.75, 53.35) were more likely to have TB knowledge score ≥ mean. Workers with knowledge score ≥ mean (AOR = 1.91; 95 % CI:1.44, 2.53) and exposure to CHWs either alone (AOR = 42.4; 95 % CI: 9.94, 180.5) or in combination with print media (AOR = 37.35; 95 % CI: 9.1, 180.5) were more likely to go to DOTS centre for treatment

Investigating differences in light stable isotopes between Thai jasmine rice and Sungyod rice

Science.gov (United States)

Kukusamude, C.; Kongsri, S.

2017-10-01

We report the differences in light stable isotopes between two kinds of Thai rice (Thai jasmine and Sungyod rice). Thai jasmine rice and Sungyod rice were cultivated in the northeast and the south of Thailand. Light isotopes including 13C, 15N and 18O of Thai jasmine rice and Sungyod rice samples were carried out using isotope ratio mass spectrometry (IRMS). Thai jasmine rice (Khao Dawk Mali 105) was cultivated from Thung Kula Rong Hai area, whereas Sungyod rice was cultivated from Phathalung province. Hypothesis testing of difference of each isotope between Thai jasmine rice and Sungyod rice was also studied. The study was the feasibility test whether the light stable isotopes can be the variables to identify Thai jasmine rice and Sungyod rice. The result shows that there was difference in the isotope patterns of Thai jasmine rice and Sungyod rice. Our results may provide the useful information in term of stable isotope profiles of Thai rice.

Elemental and isotopic characterization of Japanese and Philippine polished rice samples using instrumental neutron activation analysis and isotope ratio mass spectrometry

International Nuclear Information System (INIS)

Pabroa, Preciosa Corazon B.; Sucgang, Raymond J.; Mendoza, Norman dS.; Ebihara, Mitsuru

2011-01-01

Rice is a staple food for most Asian countries such as the Philippines and Japan and as such its elemental and isotopic content are of interest to the consumers. Its elemental content may reflect the macro nutrient reduction during milling or probable toxic elements uptake. Three Japanese and four Philippine polished rice samples in his study mostly came from rice bought from supermarkets.These rice samples were washed, dried and ground to fine powder. Instrumental neutron activation analysis (INAA), a very sensitive non-destructive multi-element analytical technique, was used for the elemental analysis of the samples and isotope-ratio mass spectrometry (IRMS) was used to obtain the isotopic signatures of the samples. Results show that compared with the unpolished rice standard NIES CRM10b, the polished Japanese and Philippine rice sampled show reduced concentrations of elements by as much as 1/3 to 1/10 of Mg, Mn, K and Na. Levels of Ca and Zn are not greatly affected. Arsenic is found in all the Japanese rice tested at an average concentration of 0.103 μg/g and three out of four of the Philippine rice at an average concentration of 0.070 μg/g. Arsenic contamination may have been introduced from the fertilizer used in rice fields. Higher levels of Br are seen in two of the Philippine rice at 14 and 34 μg/g with the most probable source being the pesticide methyl bromide. Isotopic ratio of ae 13 C show signature of a C3 plant with possible narrow distinguishable signature of Japanese rice within -27.5 to -28.5 while Philippine rice within -29 to -30. More rice samples will be analyzed to gain better understanding of isotopic signatures to distinguish inter-varietal and/or geographical differences. Elemental composition of soil samples of rice samples sources will be determined for better understanding of uptake mechanisms. (author)

Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

DEFF Research Database (Denmark)

De Grave, Arnaud; Hansen, Hans Nørgaard; Andolfatto, Loic

2009-01-01

In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy...... by micro milling. Examples of test parts are shown and used as an experimental validation....

Determination of aerosol size distributions at uranium mill tailings remedial action project sites

International Nuclear Information System (INIS)

Newton, G.J.; Reif, R.H.; Hoover, M.D.

1994-01-01

The U.S. Department of Energy (DOE) has an ongoing program, the Uranium Mill Tailings Remedial Action (UMTRA) Project, to stabilize piles of uranium mill tailings in order to reduce the potential radiological hazards to the public. Protection of workers and the general public against airborne radioactivity during remedial action is a top priority at the UMTRA Project. The primary occupational radionuclides of concern are 230 Th, 226 Ra, 210 Pb, 210 Po, and the short-lived decay products of 222 Rn with 230 Th causing the majority of the committed effective dose equivalent (CEDE) from inhaling uranium mill tailings. Prior to this study, a default particle size of 1.0 μm activity median aerodynamic diameter (AMAD) was assumed for airborne radioactive tailings dust. Because of recent changes in DOE requirements, all DOE operations are now required to use the CEDE methodology, instead of the annual effective dose equivalent (AEDE) methodology, to evaluate internal radiation exposures. Under the transition from AEDE to CEDE, with a 1.0 μm AMAD particle size, lower bioassay action levels would be required for the UMTRA Project. This translates into an expanded internal dosimetry program where significantly more bioassay monitoring would be required at the UMTRA Project sites. However, for situations where the particle size distribution is known to differ significantly from 1.0 μm AMAD, the DOE allows for corrections to be made to both the estimated dose to workers and the derived air concentration (DAC) values. For particle sizes larger than 1.0 μm AMAD, the calculated CEDE from inhaling tailings would be relatively lower

Extraction of rice bran oil from local rice husk

International Nuclear Information System (INIS)

Anwar, J.; Zaman, W.; Salman, M.; Jabeen, N.

2006-01-01

Rice Bran Oil is widely used in pharmaceutical, food and chemical industries due to its unique properties and high medicinal value. In the present work, extraction of rice bran oil from different samples of rice husk collected from local rice shellers by solvent extraction method has been studied. Experiments were conducted using a soxhelt apparatus, to extract rice bran oil using hexane, petroleum ether, ethanol and methanol as the solvents and the yields obtained under different conditions were compared. Batch extraction tests showed that the rate of extraction decreases with time and the solution approaches saturation at an exponential rate. (author)

Uranium Mill Tailings Management

International Nuclear Information System (INIS)

Nelson, J.D.

1982-01-01

This book presents the papers given at the Fifth Symposium on Uranium Mill Tailings Management. Advances made with regard to uranium mill tailings management, environmental effects, regulations, and reclamation are reviewed. Topics considered include tailings management and design (e.g., the Uranium Mill Tailings Remedial Action Project, environmental standards for uranium mill tailings disposal), surface stabilization (e.g., the long-term stability of tailings, long-term rock durability), radiological aspects (e.g. the radioactive composition of airborne particulates), contaminant migration (e.g., chemical transport beneath a uranium mill tailings pile, the interaction of acidic leachate with soils), radon control and covers (e.g., radon emanation characteristics, designing surface covers for inactive uranium mill tailings), and seepage and liners (e.g., hydrologic observations, liner requirements)

Preliminary Test of Upgraded Conventional Milling Machine into PC Based CNC Milling Machine

International Nuclear Information System (INIS)

Abdul Hafid

2008-01-01

CNC (Computerized Numerical Control) milling machine yields a challenge to make an innovation in the field of machining. With an action job is machining quality equivalent to CNC milling machine, the conventional milling machine ability was improved to be based on PC CNC milling machine. Mechanically and instrumentally change. As a control replacing was conducted by servo drive and proximity were used. Computer programme was constructed to give instruction into milling machine. The program structure of consists GUI model and ladder diagram. Program was put on programming systems called RTX software. The result of up-grade is computer programming and CNC instruction job. The result was beginning step and it will be continued in next time. With upgrading ability milling machine becomes user can be done safe and optimal from accident risk. By improving performance of milling machine, the user will be more working optimal and safely against accident risk. (author)

RiceAtlas, a spatial database of global rice calendars and production.

Science.gov (United States)

Laborte, Alice G; Gutierrez, Mary Anne; Balanza, Jane Girly; Saito, Kazuki; Zwart, Sander J; Boschetti, Mirco; Murty, M V R; Villano, Lorena; Aunario, Jorrel Khalil; Reinke, Russell; Koo, Jawoo; Hijmans, Robert J; Nelson, Andrew

2017-05-30

Knowing where, when, and how much rice is planted and harvested is crucial information for understanding the effects of policy, trade, and global and technological change on food security. We developed RiceAtlas, a spatial database on the seasonal distribution of the world's rice production. It consists of data on rice planting and harvesting dates by growing season and estimates of monthly production for all rice-producing countries. Sources used for planting and harvesting dates include global and regional databases, national publications, online reports, and expert knowledge. Monthly production data were estimated based on annual or seasonal production statistics, and planting and harvesting dates. RiceAtlas has 2,725 spatial units. Compared with available global crop calendars, RiceAtlas is nearly ten times more spatially detailed and has nearly seven times more spatial units, with at least two seasons of calendar data, making RiceAtlas the most comprehensive and detailed spatial database on rice calendar and production.

The safe management of radioactive waste from mining and milling activities

International Nuclear Information System (INIS)

Reisenweaver, D.W.

2002-01-01

The IAEA is developing a Safety Guide for the management of radioactive waste from the mining and milling of uranium and thorium ores. This new Safety Guide will provide information that has been requested by Member States concerning the safe management of these wastes. The guide includes some new concepts, but they are intended to be reasonable and provide appropriate safety conditions for the workers, general public and the environment. The Regulatory Authorities of individual countries are responsible for establishing and implementing the regulatory framework through the development of appropriate rules, criteria and guidelines and establishing a licensing framework. The IAEA has issued a number of publications that provide requirements and guidance for the protection of workers, public and the environment. The overall objective and subsidiary principles developed explicitly for the management of radioactive waste should emphasize that the protection of the public from the beginning of operation to post-closure should be considered in its entity from the beginning of the design of the facility. The Safety Guide acknowledges that mining and milling wastes will contain non radiological hazards, in addition to the radiological hazards. The development of the waste management strategy is usually a complex process that aims to achieve a reasonable balance between the often conflicting goals - maximizing risk reduction versus minimizing financial expenditures. The evaluation criteria and procedures used to select the preferred option/and or development of the waste management strategy should be clearly defined and acceptable for the different parties interested in the project. This includes the public. A safety assessment should be performed to indicate how the design of the waste management facilities provides the optimum protection for the workers, public and environment using safety-type indicators. (author)

Ingestion of Bt rice pollen does not reduce the survival or hypopharyngeal gland development of Apis mellifera adults.

Science.gov (United States)

Wang, Yuanyuan; Dai, Pingli; Chen, Xiuping; Romeis, Jörg; Shi, Jianrong; Peng, Yufa; Li, Yunhe

2017-05-01

Because of its ecological and economic importance, the honey bee Apis mellifera is commonly used to assess the environmental risk of insect-resistant, genetically modified plants. In the present study, feeding-exposure experiments were used to determine whether pollen from transgenic rice harms A. mellifera worker bees. In 1 experiment, the survival and mean acinus diameter of hypopharyngeal glands of adult bees were similar when bees were fed on pollen from Bt rice lines or from a non-Bt rice line, but bee survival was significantly reduced when they received pollen that was mixed with potassium arsenate as a positive control. In a second experiment, bee survival and hypopharyngeal gland development were not reduced when adult bees were fed on non-Bt pollen and a sucrose solution supplemented with Cry2A at 400 µg/g, Cry1C at 50 µg/g, or bovine serum albumin (BSA) at 400 µg/g, but bee survival and hypopharyngeal gland development were reduced when the diet was supplemented with soybean trypsin inhibitor as a positive control. In both experiments, the uptake of Cry proteins by adult bees was confirmed. Overall, the results indicate that the planting of Bt rice lines expressing Cry2A or Cry1C protein poses a negligible risk to A. mellifera worker bees. Environ Toxicol Chem 2017;36:1243-1248. © 2016 SETAC. © 2016 SETAC.

Transgene Flow from Glufosinate-Resistant Rice to Improved and Weedy Rice in China

Directory of Open Access Journals (Sweden)

Yong-liang LU

2014-09-01

Full Text Available The development of transgenic rice with novel traits in China can increase rice productivity, but transgene flow to improved or weedy rice has become a major concern. We aimed to evaluate the potential maximum frequencies of transgene flow from glufosinate-resistant rice to improved rice cultivars and weedy rice. Treatments were arranged in randomized complete blocks with three replicates. Experiments were conducted between 2009 and 2010 at the Center for Environmental Safety Supervision and Inspection for Genetically Modified Plants, China National Rice Research Institute, Hangzhou, China. Glufosinate-resistant japonica rice 99-1 was the pollen donor. The pollen recipients were two inbred japonica rice (Chunjiang 016 and Xiushui 09, two inbred indica rice (Zhongzu 14 and Zhongzao 22, two indica hybrid rice (Zhongzheyou 1 and Guodao 1, and one weedy indica rice (Taizhou weedy rice. The offspring of recipients were planted in the field and sprayed with a commercial dose of glufosinate. Leaf tissues of survivors were analyzed by polymerase chain reaction to detect the presence of the transgene. The frequency of gene flow ranged from 0 to 0.488%. In 2009, the order of gene flow frequency was as follows: weedy rice > Chunjiang 016 > Xiushui 09 and Zhongzu 14 > Guodao 1, Zhongzheyou 1 and Zhongzao 22. Gene flow frequencies were generally higher in 2009 than in 2010, but did not differ significantly among rice materials. Gene flow frequency was the highest in weedy rice followed by the inbred japonica rice. The risk of gene flow differed significantly between years and year-to-year variance could mask risk differences among pollen recipients. Gene flow was generally lesser in taller pollen recipients than in shorter ones, but plant height only accounted for about 30% of variation in gene flow. When flowering synchrony was maximized, as in this study, low frequencies of gene flow occurred from herbicide-resistant japonica rice to other cultivars and

Analysis of uranium urinalysis and in vivo measurement results from eleven participating uranium mills

International Nuclear Information System (INIS)

Spitz, H.B.; Simpson, J.C.; Aldridge, T.L.

1984-05-01

Uranium urinalysis and in vivo examination results obtained from workers at eleven uranium mills between 1978 and 1980 were evaluated. The main purpose was to determine the degree of the mills' compliance with bioassay monitoring recommendations given in the draft NRC Regulatory Guide 8.22 (USNRC 1978). The effect of anticipated changes in the draft regulatory guidance, as expressed to PNL in May 1982, was also studied. Statistical analyses of the data showed that the bioassay results did not reliably meet the limited performance criteria given in the draft regulatory guide. Furthermore, quality control measurements of uranium in urine indicated that detection limits at α = β = 0.05 ranged from 13 μg/l to 29 μg/l, whereas the draft regulatory guidance suggests 5 μg/l as the detection limit. Recommendations for monitoring frequencies given in the draft guide were not followed consistently from mill to mill. The results of these statistical analyses indicate a need to include performance criteria for accuracy, precision, and confidence in revisions of the draft Regulatory Guide 8.22. Revised guidance should also emphasize the need for each mill to continually test the laboratory performing urinalyses by submitting quality control samples (i.e., blank and spiked urine samples as open and blind test) to insure that the performance criteria are being met. Recommendations for a bioassay audit program are also given. 25 references, 15 figures, 17 tables

Rice production in relation to soil quality under different rice-based cropping systems

Science.gov (United States)

Tran Ba, Linh; Sleutel, Steven; Nguyen Van, Qui; Thi, Guong Vo; Le Van, Khoa; Cornelis, Wim

2016-04-01

Soil quality of shallow paddy soils may be improved by introducing upland crops and thus a more diverse crop cultivation pattern. Yet, the causal relationship between crop performance and enhanced soil traits in rice-upland crop rotations remains elusive. The objectives of this study were to (i) find correlations among soil properties under different rice-upland crop systems and link selected soil properties to rice growth and yield, (ii) present appropriate values of soil parameters for sustainable rice productivity in heavy clay soil, (iii) evaluate the effect of rotating rice with upland crops on rice yield and economic benefit in a long-term experiment. A rice-upland crop rotational field experiment in the Vietnamese Mekong delta was conducted for 10 years using a randomized complete block design with four treatments and four replications. Treatments were: (i) rice-rice-rice (control - conventional system as farmers' practice), (ii) rice-maize-rice, (iii) rice-mung bean-rice, and (iv) rice-mung bean-maize. Soil and plant sampling were performed after harvest of the rice crop at the end of the final winter-spring cropping season (i.e. year 10). Results show differences in rice growth and yield, and economic benefit as an effect of the crop rotation system. These differences were linked with changes in bulk density, soil porosity, soil aggregate stability index, soil penetration resistance, soil macro-porosity, soil organic carbon, acid hydrolysable soil C and soil nutrient elements, especially at soil depth of 20-30 cm. This is evidenced by the strong correlation (P < 0.01) between rice plant parameters, rice yield and soil properties such as bulk density, porosity, penetration resistance, soil organic carbon and Chydrolysable. It turned out that good rice root growth and rice yield corresponded to bulk density values lower than 1.3 Mg m-3, soil porosity higher than 50%, penetration resistance below 1.0 MPa, and soil organic carbon above 25 g kg-1. The optimal

RPAN: rice pan-genome browser for ∼3000 rice genomes.

Science.gov (United States)

Sun, Chen; Hu, Zhiqiang; Zheng, Tianqing; Lu, Kuangchen; Zhao, Yue; Wang, Wensheng; Shi, Jianxin; Wang, Chunchao; Lu, Jinyuan; Zhang, Dabing; Li, Zhikang; Wei, Chaochun

2017-01-25

A pan-genome is the union of the gene sets of all the individuals of a clade or a species and it provides a new dimension of genome complexity with the presence/absence variations (PAVs) of genes among these genomes. With the progress of sequencing technologies, pan-genome study is becoming affordable for eukaryotes with large-sized genomes. The Asian cultivated rice, Oryza sativa L., is one of the major food sources for the world and a model organism in plant biology. Recently, the 3000 Rice Genome Project (3K RGP) sequenced more than 3000 rice genomes with a mean sequencing depth of 14.3×, which provided a tremendous resource for rice research. In this paper, we present a genome browser, Rice Pan-genome Browser (RPAN), as a tool to search and visualize the rice pan-genome derived from 3K RGP. RPAN contains a database of the basic information of 3010 rice accessions, including genomic sequences, gene annotations, PAV information and gene expression data of the rice pan-genome. At least 12 000 novel genes absent in the reference genome were included. RPAN also provides multiple search and visualization functions. RPAN can be a rich resource for rice biology and rice breeding. It is available at http://cgm.sjtu.edu.cn/3kricedb/ or http://www.rmbreeding.cn/pan3k. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Free and bound phenolic profiles and antioxidant activity of milled fractions of different indica rice varieties cultivated in southern China.

Science.gov (United States)

Ti, Huihui; Li, Qing; Zhang, Ruifen; Zhang, Mingwei; Deng, Yuanyuan; Wei, Zhencheng; Chi, Jianwei; Zhang, Yan

2014-09-15

This study quantified free and bound phytochemicals and their antioxidant activity in the endosperm and bran/embryo of different indica rice varieties. Phytochemicals mainly existed as free form in the bran/embryo and as both free and bound forms in the endosperm. The average values of total phenolic content, flavonoid content, FRAP, ABTS and ORAC values in the bran/embryo were 3.1, 10.4, 8.2, 11.2 and 11.4 times higher than those in the endosperm, respectively. In whole brown rice, the bran contributed 59.2%, 53.7%, 47.7%, 55.5% and 56.9% of total phenolics, flavonoids, FRAP, ABTS and ORAC values, respectively. Seven individual phenolics (gallic, protocatechuic, chlorogenic, caffeic, syringic, coumaric and ferulic acids) were detected with most coumaric and ferulic acids in the bran. All measurements exhibited varietal differences. These findings provide important information for improving human health by encouraging the consumption of whole brown rice and its use in food product development. Copyright © 2014 Elsevier Ltd. All rights reserved.

Structural elucidation and antioxidant activity of lignin isolated from rice straw and alkali‑oxygen black liquor.

Science.gov (United States)

Jiang, Bo; Zhang, Yu; Gu, Lihui; Wu, Wenjuan; Zhao, Huifang; Jin, Yongcan

2018-05-17

Alkali‑oxygen cooking of lignocellulose offers lignin many structural properties and bioactivities for biorefinery. In this work, milled wood lignin (MWL) and alkali‑oxygen lignin (AOL) were isolated from rice straw and alkali‑oxygen black liquor, respectively. The lignin structure was characterized by spectroscopy and wet chemistry. Antioxidant activity of lignins was assessed by DPPH·and ABTS scavenging ability assay. Results showed the oxidization and condensation of lignin occurred during alkali‑oxygen cooking. The p-hydroxyphenyl was more easily removed from rice straw than guaiacyl and syringyl units. The ester or ether linkages derived from hydroxycynnamic acids, and the main interunit linkages, i.e. β-O-4' bonds, were mostly cleaved. Lignin-xylan complex had high reactivity under alkali‑oxygen condition. Tricin, incorporated into lignin, was detected in MWL but was absent in AOL. Nitrobenzene oxidation showed MWL can well represent the protolignin of rice straw, and the products yield decreased dramatically after alkali‑oxygen cooking. AOL had higher radical scavenging ability than MWL indicating alkali‑oxygen cooking was an effective pathway for the enhancement of antioxidant activity of lignin. Copyright © 2018 Elsevier B.V. All rights reserved.

Investigation of the milling capabilities of the F10 Fine Grind mill using Box-Behnken designs.

Science.gov (United States)

Tan, Bernice Mei Jin; Tay, Justin Yong Soon; Wong, Poh Mun; Chan, Lai Wah; Heng, Paul Wan Sia

2015-01-01

Size reduction or milling of the active is often the first processing step in the design of a dosage form. The ability of a mill to convert coarse crystals into the target size and size distribution efficiently is highly desirable as the quality of the final pharmaceutical product after processing is often still dependent on the dimensional attributes of its component constituents. The F10 Fine Grind mill is a mechanical impact mill designed to produce unimodal mid-size particles by utilizing a single-pass two-stage size reduction process for fine grinding of raw materials needed in secondary processing. Box-Behnken designs were used to investigate the effects of various mill variables (impeller, blower and feeder speeds and screen aperture size) on the milling of coarse crystals. Response variables included the particle size parameters (D10, D50 and D90), span and milling rate. Milled particles in the size range of 5-200 μm, with D50 ranging from 15 to 60 μm, were produced. The impeller and feeder speeds were the most critical factors influencing the particle size and milling rate, respectively. Size distributions of milled particles were better described by their goodness-of-fit to a log-normal distribution (i.e. unimodality) rather than span. Milled particles with symmetrical unimodal distributions were obtained when the screen aperture size was close to the median diameter of coarse particles employed. The capacity for high throughput milling of particles to a mid-size range, which is intermediate between conventional mechanical impact mills and air jet mills, was demonstrated in the F10 mill. Prediction models from the Box-Behnken designs will aid in providing a better guide to the milling process and milled product characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

Effects of rice bran on sensory and physico-chemical properties of emulsified pork meatballs.

Science.gov (United States)

Huang, S C; Shiau, C Y; Liu, T E; Chu, C L; Hwang, D F

2005-08-01

Four kinds of bran, which are milled from important rice cultivators in Taiwan, have high contents of dietary fiber, fat and protein. The use of rice bran in Kung-wan, an emulsified pork meatball, was investigated. It was found that protein and fat contents, and white index of meatballs decreased as the amount of bran increased. A texture profile analysis (TPA) also indicated the hardness, gumminess and chewiness of the Kung-wan decreased. The sensory scores of taste, texture and overall acceptability of meatballs with less than 10% added bran showed no significant difference from those for meatballs without bran. However, the added amount of 15% enriched meatballs resulted in inferior sensory scores. The bran's particle size profoundly affected the sensory and physico-chemical properties of the meat products. Meatballs enriched with smaller bran particles possessed higher TPA indices and sensory scores than those added with larger ones. No significant differences in proximate composition, cooking yield, color and sensory quality were found among emulsified meatballs enriched with four different kinds of bran. Conclusively, the suitable amount of rice bran that should be added to emulsified pork meatballs was less than 10% and a smaller particle size would result in better quality.

Uranium mining and milling work force characteristics in the western US

International Nuclear Information System (INIS)

Rapp, D.A.

1980-12-01

This report presents the results of a survey of the socioeconomic characteristics associated with 11 uranium mine and mill operations in 5 Western States. Comparisons are made with the socioeconomic characteristics of construction and operating crews for coal mines and utility plants in eight Western States. Worker productivity also is compared with that in similar types of coal and uranium mining operations. We found that there existed no significant differences between the socioeconomic characteristics of construction and operating crews and the secondary employment impacts associated with uranium mines and mills when compared with those associated with coal mines and utility plants requiring similar skills at comparable locations. In addition, our survey includes a comparison of several characteristics associated with the households of basic and nonbasic work forces and concludes that significant changes have occurred in the last 5 yr. Accordingly, we recommend additional monitoring and updating of data used in several economic forecasting models to avoid unwarranted delays in achieving national energy goals

Analysis of rice purchase decision on rice consumer in Bandung city

Science.gov (United States)

Kusno, K.; Imannurdin, A.; Syamsiyah, N.; Djuwendah, E.

2018-03-01

This study was conducted at three kinds of purchase location which were traditional market, rice kiosk, and supermarket in Bandung City, with survey data of 108 respondents which were selected by systematic random sampling. The aim of this study is to (1) identify consumer characteristics, (2) identify which atribute is considered by consumer in buying rice, and (3) analyze the relationship between purchase decision and income class. Data were analyzed by descriptive analysis and Chi Square test. The results showed most consumers in the traditional market were middle-educated and lower middle-income, at the rice kiosk, the consumer were generally middle-educated and middle-income, and in the supermarkets, the majority were high-educated and upper middle-income consumers. “Kepulenan” be the first priority of most consumers, but for the lower-middle class, the main priority was price. Thus, in case of scarcity and rice price increase, the government should immediately arrange market operations which targeting to lower-middle class consumers. There was a significant relationship between (1) the quality of rice consumed, (2) the frequency of rice purchase per month, and (3) attitudes toward rice price increase; each with the income class. Although the price of rice increase, consumers of middle and upper-middle were remain loyal to the quality of rice they consumed. This indicates rice market in Bandung city is an ideal market for premium rice so that traders and producers are expected to maintain the quality of rice, such as keep using superior seeds and applying good cultivation based on Good Agricultural Practice (GAP) rules.

EVALUATION OF THE MICROCLIMATE DURING OLIVE OIL EXTRACTION OPERATIONS INSIDE OLIVE MILLS

Directory of Open Access Journals (Sweden)

Vittorio Panaro

2007-06-01

Full Text Available Some oil mills, among the most representative in the Puglia Region in terms of quality and productivity have been considered, and the temperature and humidity of the environment and the sensations of temperature felt by the workers were registered inside them during the process of oil extraction. Subsequently, a numerical code in MATLAB language was created, able to calculate the PMV and PPD and a study was carried out of the conditions of global comfort in the environment during the oil extraction process. The results of the surveys carried out in the mills show the importance of microclimate risk analysis in these workplaces, since the instrumental surveys and the calculations have shown that climatic conditions are not comfortable in the olive storage bays. On the other hand, the data from the oil extraction areas shows an acceptable condition of thermal well-being.

PhosphoRice: a meta-predictor of rice-specific phosphorylation sites

Directory of Open Access Journals (Sweden)

Que Shufu

2012-02-01

Full Text Available Abstract Background As a result of the growing body of protein phosphorylation sites data, the number of phosphoprotein databases is constantly increasing, and dozens of tools are available for predicting protein phosphorylation sites to achieve fast automatic results. However, none of the existing tools has been developed to predict protein phosphorylation sites in rice. Results In this paper, the phosphorylation site predictors, NetPhos 2.0, NetPhosK, Kinasephos, Scansite, Disphos and Predphosphos, were integrated to construct meta-predictors of rice-specific phosphorylation sites using several methods, including unweighted voting, unreduced weighted voting, reduced unweighted voting and weighted voting strategies. PhosphoRice, the meta-predictor produced by using weighted voting strategy with parameters selected by restricted grid search and conditional random search, performed the best at predicting phosphorylation sites in rice. Its Matthew's Correlation Coefficient (MCC and Accuracy (ACC reached to 0.474 and 73.8%, respectively. Compared to the best individual element predictor (Disphos_default, PhosphoRice archieved a significant increase in MCC of 0.071 (P Conclusions PhosphoRice is a powerful tool for predicting unidentified phosphorylation sites in rice. Compared to the existing methods, we found that our tool showed greater robustness in ACC and MCC. PhosphoRice is available to the public at http://bioinformatics.fafu.edu.cn/PhosphoRice.

Durability of conventional concretes containing black rice husk ash.

Science.gov (United States)

Chatveera, B; Lertwattanaruk, P

2011-01-01

In this study, black rice husk ash (BRHA) from a rice mill in Thailand was ground and used as a partial cement replacement. The durability of conventional concretes with high water-binder ratios was investigated including drying shrinkage, autogenous shrinkage, depth of carbonation, and weight loss of concretes exposed to hydrochloric (HCl) and sulfuric (H(2)SO(4)) acid attacks. Two different replacement percentages of cement by BRHA, 20% and 40%, and three different water-binder ratios (0.6, 0.7 and 0.8) were used. The ratios of paste volume to void content of the compacted aggregate (γ) were 1.2, 1.4, and 1.6. As a result, when increasing the percentage replacement of BRHA, the drying shrinkage and depth of carbonation reaction of concretes increased. However, the BRHA provides a positive effect on the autogenous shrinkage and weight loss of concretes exposed to hydrochloric and sulfuric acid attacks. In addition, the resistance to acid attack was directly varied with the (SiO(2) + Al(2)O(3) + Fe(2)O(3))/CaO ratio. Results show that ground BRHA can be applied as a pozzolanic material and also improve the durability of concrete. Copyright © 2010 Elsevier Ltd. All rights reserved.

Einstein-Yang-Mills from pure Yang-Mills amplitudes

Energy Technology Data Exchange (ETDEWEB)

Nandan, Dhritiman; Plefka, Jan [Institut für Physik and IRIS Adlershof, Humboldt-Universität zu Berlin,Zum Großen Windkanal 6, D-12489 Berlin (Germany); Schlotterer, Oliver [Max-Planck-Institut für Gravitationsphysik, Albert-Einstein-Institut,Am Mühlenberg 1, D-14476 Potsdam (Germany); Wen, Congkao [I.N.F.N. Sezione di Roma Tor Vergata,Via della Ricerca Scientifica, 00133 Roma (Italy)

2016-10-14

We present new relations for scattering amplitudes of color ordered gluons and gravitons in Einstein-Yang-Mills theory. Tree-level amplitudes of arbitrary multiplicities and polarizations involving up to three gravitons and up to two color traces are reduced to partial amplitudes of pure Yang-Mills theory. In fact, the double-trace identities apply to Einstein-Yang-Mills extended by a dilaton and a B-field. Our results generalize recent work of Stieberger and Taylor for the single graviton case with a single color trace. As the derivation is made in the dimension-agnostic Cachazo-He-Yuan formalism, our results are valid for external bosons in any number of spacetime dimensions. Moreover, they generalize to the superamplitudes in theories with 16 supercharges.

Effect of parboiling on the formation of resistant starch, digestibility and functional properties of rice flour from different varieties grown in Sri Lanka.

Science.gov (United States)

Gunaratne, Anil; Kao, Wu; Ratnayaka, Jennet; Collado, Lilia; Corke, Harold

2013-08-30

Hydrothermal treatment used in parboiling could induce formation of novel starch properties having potential food applications. In the current work, functional, digestible and retrogradation properties of flour from non-parboiled and steamed parboiled six rice varieties with high amylose content of around 30% but differing in length and width ratio were investigated and compared. The parboiling process reduced swelling volume and amylose leaching in all tested varieties. Among the varieties studied, the resistant starch content ranged from 1.6% in AT 306 to 0.46% in BG 357. Parboiling reduced the resistant starch content in AT 306 by about 50%, but it did not significantly affect the resistant starch content of the other varieties. The amylose-lipid complex remained unchanged after parboiling. Amylopectin retrogradation was not observed in parboiled rice. Amylose retrogradation was not seen except for AT 306. Pasting behaviour of parboiled rice flours showed high pasting stability and low setback. Flours were more susceptible to enzymatic hydrolysis after parboiling. Partial gelatinisation during parboiling was sufficient to produce grains with excellent milling quality showing a head rice recovery that ranged from 98% to 100% among the varieties studied. Degree of gelatinisation is the most important factor that determines the high head rice recovery. High pasting stability and low setback of flour of parboiled rice indicate some potential food applications. © 2013 Society of Chemical Industry.

Rice microstructure

Science.gov (United States)

An understanding of plant structure is desirable to obtain a clear idea of the overall impact of a crop. A mature rice plant consists of leafy components (left in the field post-harvest) and paddy rice (collected). The rice plant is supported by a hollow stem (culm) with leaf sheaths attached to nod...

Analisis Faktor Risiko kadar debu Organik di udara terhadap Gangguan fungsi Paru pada Pekerja Industri Penggilingan Padi di Demak

Directory of Open Access Journals (Sweden)

F. S. Nugraheni S.

2015-12-01

Full Text Available ABSTRACT Background: Industry will not only increase the prosperity of society, but also could bring on an effect of pollution, included rice mill industry at Demak Regency. The effect is air pollution, in which it would take along a disturbance on lung’s function of, especially, workers of the industry. The aim of this research is to find out risk factor of dust’s amount on air at working area to lung’s function of the workers inside, and also to measure the prevalence ratio of dust exposure’s effect to the disturbance of lung’s function on workers. Disturbance of lung’s function, on this research, is limited on lung function parameter, which are FVC, FEV1 and FEV1/FVC ratio and all are classified as dichotomy. Methods: This research is classified as survey analitic research with cross sectional approach. The population is workers on industry at Demak Regency. Research is carried on by measuring lung’s function parameter using Spirometer. The samples are 45 peoples of 3 (three rice mill industry. They are taken by Simple Random Sampling method of 85 existing workers. Results: The result shows that 34 of 45 respondents are working indoor with the amount of dust is bigger than Limiting Value. From the Statistical Test, we get that the incidence of disturbance of lung’s function on workers is influenced by the amount of dust on air at working area (p value = 0,002, and also strengthened by working duration (p value = 0,000, smoking habit (p value = 0,001, and the existence of history of lung disease (p value = 0,001. The prevalence ratios of each independent variables to the incidence of disturbance of lung’s function are : the amoung of organic dust on air (PR = 3,018, p value = 0.039, and also strengthened by the existence of history of lung disease (PR = 3.535, p value = 0.021, working duration (PR = 4.130, p value = 0.024. Meanwhile, the utilization of masker is proven not influencing in decreasing the incidence of

Farmers’ Preference for Rice Traits: Insights from Farm Surveys in Central Luzon, Philippines, 1966-2012

Science.gov (United States)

Laborte, Alice G.; Paguirigan, Neale C.; Moya, Piedad F.; Nelson, Andrew; Sparks, Adam H.; Gregorio, Glenn B.

2015-01-01

Many modern rice varieties (MVs) have been released but only a few have been widely adopted by farmers. To understand farmers’ preferences, we characterized MVs released in the Philippines from 1966 to 2013 and identified important characteristics of the varieties that were widely adopted in Central Luzon using farm surveys conducted in 1966–2012. We found that farmers adopt MVs that are high yielding, mature faster, and have long and slender grains, high milling recovery, and intermediate amylose content. The amylose content of adopted varieties has been declining, suggesting value in developing softer rice. To have a high potential for adoption, new MVs should have characteristics within the ranges of values observed for the adopted MVs. In addition, new MVs should have higher head rice recovery, less chalky grains, and better resistance to pests and diseases. Most MVs released in 2005–2013 compared poorly in these three traits. To reduce the risk of severe outbreaks, broad spectrum resistance should be incorporated into new MVs. This analysis of five decades of farm surveys provides insights into the varietal characteristics preferred by farmers which could contribute to the establishment of a product profile for developing improved MVs that are more targeted and, hence, would have high potential for adoption by farmers in Central Luzon and similar areas. We recommend a similar analysis be done in other major rice growing regions to aid the development of MVs that are more responsive to farmers’ needs and preferences. PMID:26317505

Radiation protection of workers in uranium mining, ore processing and fuel fabrication in India

International Nuclear Information System (INIS)

Khan, A. H.; Jha, G.; Jha, S.; Srivastava, G. K.; Sadasivan, S.; Raj, Venkat

2002-01-01

Low grade of uranium ore mined from three underground mines is processed in a mill at Jaduguda in eastern India to recover uranium concentrate in the form of yellow cake. This concentrate is further processed at the Nuclear Fuel Complex at Hyderabad, in southern India, to produce fuel for use in nuclear power plants. Radiation protection of workers is given due importance at all stages of these operations. Dedicated Health Physics Units and Environmental Survey Laboratories established at each site regularly carry out in-plant and environmental surveillance to keep radiation exposure of workers and the members of public within the limits prescribed by the regulatory body. The limits set by the national regulatory body are based on the international standards suggested by the ICRP and the IAEA. In the uranium mines external gamma radiation, radon and airborne activity due to radioactive dust is monitored. Similarly, in the uranium mill and the fuel fabrication plant gamma radiation and airborne radioactivity due to long-lived α -emitters are monitored. Personal dosimeters are also issued to workers. The total radiation exposure of workers from external and internal sources is evaluated from the personal monitoring and area monitoring data. It has been observed that the total radiation dose to workers has been well below 20 mSv.y 1 at all stages of operations. Adequate ventilation is provided during mining, ore processing and fuel fabrication operations to keep the concentrations of airborne radioactivity well below the derived limits. Workers use personal protective appliances, where necessary, as a supplementary means of control. The monitoring methodologies, results and control measures are presented in the paper

Radiation protection of workers in uranium mining, ore processing and fuel fabrication in India

International Nuclear Information System (INIS)

Khan, A.H.; Jha, G.; Jha, S.; Srivastava, G.K.; Sadasivan, S.; Venkat Raj, V.

2002-01-01

Full text: Low grade of uranium ore mined from three underground mines is processed in a mill at Jaduguda in eastern India to recover uranium concentrate in the form of yellow cake. This concentrate is further processed at the Nuclear Fuel Complex at Hyderabad, in southern India, to produce fuel for use in nuclear power plants. Radiation protection of workers is given due importance at all stages of these operations. Dedicated Health Physics Units and Environmental Survey Laboratories established at each site regularly carry out in-plant and environmental surveillance to keep radiation exposure of workers and the members of public within the limits prescribed by the regulatory body. The limits set by the national regulatory body are based on the international standards suggested by the ICRP and the IAEA. In the uranium mines external gamma radiation, radon and airborne activity due to radioactive dust is monitored. Similarly, in the uranium mill and the fuel fabrication plant gamma radiation and airborne radioactivity due to long-lived a- emitters are monitored. Personal dosimeters are also issued to workers. The total radiation exposure of workers from external and internal sources is evaluated from the personal monitoring and area monitoring data. It has been observed that the total radiation dose to workers has been well below 20 mSvy -1 at all stages of operations. Adequate ventilation is provided during mining, ore processing and fuel fabrication operations to keep the concentrations of airborne radioactivity well below the derived limits. Workers use personal protective appliances, where necessary, as a supplementary means of control. The monitoring methodologies, results and control measures are presented in the paper

Worker exposures from recycling surface contaminated radioactive scrap metal

International Nuclear Information System (INIS)

Kluk, A.; Phillips, J.W.; Culp, J.

1996-01-01

Current DOE policy permits release from DOE control of real property with residual levels of surficial radioactive contamination if the contamination is below approved guidelines. If the material contains contamination that is evenly distributed throughout its volume (referred to as volumetric contamination), then Departmental approval for release must be obtained in advance. Several DOE sites presently recycle surface contaminated metal, although the quantities are small relative to the quantities of metal processed by typical mini-mills, hence the potential radiation exposures to mill workers from processing DOE metals and the public from the processed metal are at present also a very small fraction of their potential value. The exposures calculated in this analysis are based on 100% of the scrap metal being processed at the maximum contamination levels and are therefore assumed to be maximum values and not likely to occur in actual practice. This paper examines the relationship between the surface contamination limits established under DOE Order 5400.5, open-quotes Radiation Protection of the Public and the Environment,close quotes and radiation exposures to workers involved in the scrap metal recycling process. The analysis is limited to surficial contamination at or below the guideline levels established in DOE Order 5400.5 at the time of release. Workers involved in the melting and subsequent fabrication of products are not considered radiation workers (no requirements for monitoring) and must be considered members of the public. The majority of the exposures calculated in this analysis range from tenths of a millirem per year (mrem/yr) to less than 5 mrem/yr. The incremental risk of cancer associated with these exposures ranges from 10 -8 cancers per year to 10 -6 cancers per year

[Nitrogen cycling in rice-duck mutual ecosystem during double cropping rice growth season].

Science.gov (United States)

Zhang, Fan; Chen, Yuan-Quan; Sui, Peng; Gao, Wang-Sheng

2012-01-01

Raising duck in paddy rice field is an evolution of Chinese traditional agriculture. In May-October 2010, a field experiment was conducted in a double cropping rice region of Hunan Province, South-central China to study the nitrogen (N) cycling in rice-duck mutual ecosystem during early rice and late rice growth periods, taking a conventional paddy rice field as the control. Input-output analysis method was adopted. The N output in the early rice-duck mutual ecosystem was 239.5 kg x hm(-2), in which, 12.77 kg x hm(-2) were from ducks, and the N output in the late rice-duck mutual ecosystem was 338.7 kg x hm(-2), in which, 23.35 kg x hm(-2) were from ducks. At the present N input level, there existed soil N deficit during the growth seasons of both early rice and late rice. The N input from duck sub-system was mainly from the feed N, and the cycling rate of the duck feces N recycled within the system was 2.5% during early rice growth season and 3.5% during late rice growth season. After late rice harvested, the soil N sequestration was 178.6 kg x hm(-2).

Liquidambar orientalis Mill.

African Journals Online (AJOL)

STORAGESEVER

2009-01-19

Jan 19, 2009 ... as in the chemical and cosmetic industry. Unfortunately ..... enzyme and random amplified polymorphic DNA loci in black spruce. Proc. Natl. Acad. Sci. USA. ... Preparation of DNA from single rice seedlings. Rice. Genet.

TECHNICAL ECONOMIC FEASIBILITY OF PADDY RICE FIELDS VARIETY OF APPROACH PTT SPECIFIC LOCATIONS IN PAPUA (Case Jayapura

Directory of Open Access Journals (Sweden)

Afrizal Malik

2013-01-01

Full Text Available Study aims to determine technical economically feasibility of irrigration rice in village of Sumbe, Namblong District, Jayapura on-farm research involving farmers with an area of 2.50 ha cooperators, July to November 2011. Technology introduced: PTT, 4:1 legowo systems, seed varieties Inpari labeled 1, 2, 4, 6, 7, 9, 10, and Sintanur. Fertilizer: urea 150 kg +100 kg +100 kg SP-36 Phonska KCl +50 kg per ha. Variables: height and number of tillers 35 and 65 dap, weight of 1000 seeds, productivity, input, and output. Data were analyzed descriptively. Highest productivity in varieties Inpari 7 (7.925 tonnes per ha Milled Rice (MR and lowest Sintanur varieties (4.625 tonnes per ha MR. Pest stand: rice leaffolder and stinky rice pest. Lowest expenditure on non-cooperators Ciherang farmers IDR 12.15 million per ha per Growing Season (GS and highest in varieties Inpari 7 (IDR 15,005,000 per ha per GS. Lowest Acceptance Ciherang farmers on non-cooperators, IDR 16.4 million per ha per GS and highest in varieties Inpari 7, IDR 27.7 million per ha per GS. If farmers apply recommendation technologies using Inpari 7 varieties, farmers receiving IDR 3,173,750 per month (greater than Regional Minimum Wage of Jayapura. Need government support in order to minimize dependence on outside

Distribution of radium-226 body burden among workers in an underground uranium mine in India

International Nuclear Information System (INIS)

Patnaik, R.L.; Srivastava, V.S.; Kumar, Rajesh; Shukla, A.K.; Tripathi, R.M.; Puranik, V.D.

2007-01-01

Workers are exposed to ore dust containing uranium and its daughter products during mining and processing of uranium ore. These radio nuclides may be an inhalation hazard to the workers during the course of their occupation. The most significant among these radio nuclides is 226 Ra. Measurement of radium body burden of uranium mine and mill workers are important to control the exposure of workers within the prescribed limit. Radon-in-breath measurement technique is used for measurement of radium body burden. Workers associated with different category of underground mining operations were monitored. The measurement results indicate that workers associated with different category of underground mining operations are having 226 Ra body burden ranging from 0.15 - 2.85 kBq. It was also observed that workers involved in timbering operation are having maximum average 226 Ra body burden of 0.97 ± 0.54 kBq. Overall average radium body burden observed for 683 workers is 0.80 kBq. (author)

Effects of Extraction Methods on Phytochemicals of Rice Bran Oils Produced from Colored Rice.

Science.gov (United States)

Mingyai, Sukanya; Srikaeo, Khongsak; Kettawan, Aikkarach; Singanusong, Riantong; Nakagawa, Kiyotaka; Kimura, Fumiko; Ito, Junya

2018-02-01

Rice bran oil (RBO) especially from colored rice is rich in phytochemicals and has become popular in food, cosmetic, nutraceutical and pharmaceutical applications owing to its offering health benefits. This study determined the contents of phytochemicals including oryzanols, phytosterols, tocopherols (Toc) and tocotrienols (T3) in RBOs extracted using different methods namely cold-press extraction (CPE), solvent extraction (SE) and supercritical CO 2 extraction (SC-CO 2 ). Two colored rice, Red Jasmine rice (RJM, red rice) and Hom-nin rice (HN, black rice), were studied in comparison with the popular Thai fragrant rice Khao Dawk Mali 105 (KDML 105, white rice). RBOs were found to be the rich source of oryzanols, phytosterols, Toc and T3. Rice varieties had a greater effect on the phytochemicals concentrations than extraction methods. HN rice showed the significantly highest concentration of all phytochemicals, followed by RJM and KDML 105 rice, indicating that colored rice contained high concentration of phytochemicals in the oil than non-colored rice. The RBO samples extracted by the CPE method had a greater concentration of the phytochemicals than those extracted by the SC-CO 2 and SE methods, respectively. In terms of phytochemical contents, HN rice extracted using CPE method was found to be the best.

Evaluation of End Mill Coatings

Energy Technology Data Exchange (ETDEWEB)

L. J. Lazarus; R. L. Hester,

2005-08-01

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

Study on the change and acculturation of dietary pattern of Southeast Asian workers living in South Korea.

Science.gov (United States)

Lee, Eun Jung; Lee, Kyung-Ran; Lee, Seung-Joo

2017-10-01

This study analyzed the dietary pattern of Southeast Asian workers (Vietnamese, Thais, Cambodians and Myanmar) living in South Korea in order to recognize the dietary changes after they moved to South Korea. Questionnaires were completed by 251 Southeast Asian workers living in South Korea. Using a self-administered questionnaire, we assessed the diets before and after living in the hometown and in South Korea. Significant changes observed in the Southeast Asian workers were decreased in consumption frequency of fresh fruits, cooked vegetables, rice noodles, green tea and glutinous rice, and increase in consumption of Kimchi, seaweed, milk, coffee and pizza. These changes were attributed to rapid dietary acculturation. The frequencies of eating homemade food were significantly decreased after they came to Korea except for Thais. Thais showed the highest frequencies of eating homemade food daily among others. 28.2% of respondents said their health condition had deteriorated after living in South Korea due to difficulties to adapt Korean food, increased frequencies of eating instant food, and lacking exercises. By providing understanding of the dietary patterns of Southeast Asian workers, these results can be used for preliminary data to develop a program for their Korean food adaptation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The normal mycoflora of commodities from Thailand. 2. Beans, rice, small grains and other commodities.

Science.gov (United States)

Pitt, J I; Hocking, A D; Bhudhasamai, K; Miscamble, B F; Wheeler, K A; Tanboon-Ek, P

1994-09-01

Part of a comprehensive study of fungi occurring in commodities in Thailand, this paper reports results from 276 samples of mung beans, rice, sorghum and soybeans as well as other minor crops. Samples for major commodities were taken from farmers' stocks, middlemen and retail outlets, while those for minor crops were mostly from retail. Each sample was divided into two portions, one being examined in Bangkok and the second at North Ryde. Mycological examinations were carried out by direct plating after surface disinfection in chlorine. Media used were dichloran rose bengal chloramphenicol agar, dichloran 18% glycerol agar, Aspergillus flavus and parasiticus agar and dichloran chloramphenicol peptone agar. Fungi were identified to species level and percentage infection of samples calculated. The dominant fungus found in mung beans was Fusarium semitectum, which was present in 40% of samples and at a high level (18% of all seeds) overall. Aspergillus flavus was also found in 40% of samples, but only in 2% of seeds overall. Lasiodiplodia theobromae was the only other fungus exceeding 1% total infection. The major fungi found in soybeans were A. flavus (67% of samples; 6% overall) and Cladosporium cladosporioides (49% of samples; 9% overall). Storage fungi were more common in soybeans than the other commodities, indicating longer or adverse storage. Paddy rice contained high levels of a wide variety of field fungi, notably Fusarium semitectum, Bipolaris oryzae, and Curvularia, Phoma and Colletotrichum species. However, probably due to the heat generated by milling, milled rice contained very few fungi, which were mostly of storage origin. Only 3% of particles examined contained internal fungi. Infection in sorghum was typical of oilseeds, dominated by Aspergillus flavus, which was present in 86% of samples, with an overall infection rate of 12%. Beans other than soybeans were infected by a wide range of field fungi, but at low levels, with less than half of seeds

Promissory rice mutants (Oryza sativa L.) obtained by Gamma Rays induction in Peru

International Nuclear Information System (INIS)

Heros, E.; Gomez, L.

2015-01-01

To improve the available rice cultivars in Peru under irrigated conditions, it was tried the rice seed Amazonas and Capirona, cultivars adapted to irrigated conditions in highland jungle, both characterized for late maturity (140-150 days). The doses were: 150-250-350 Gy that induced mutants with different characteristics to the original cultivar like: early maturity, shorter, high yield and milling quality. In Amazonas cultivar were selected 72 mutants of the M 2 generation with agronomy value and continue in evaluation only the mutant (M35-20). There were applied the same doses of gamma rays with the cultivar Capirona, there is much radiosensitivity at high doses, they were selected two early mutants (MC 35-21 and MC 35-123-3) with an early life cycle days (15 days) than parental cultivar. Two mutants tolerant to salinity (12 dSm). Six mutants are still under evaluation, two of them (MC 25-23-1 and MC 35-45-4) have better yields with performances of 9.1 t ha -1 versus 6.6 t ha -1 . These mutants show lodging and shattering resistance. (Author)

Polyhydroxyalcanoates of strains of Azospirillum spp. isolated of roots of Lycopersicon esculentum Mill. “tomato” and Oryza sativa L. “rice” in Lambayeque

Directory of Open Access Journals (Sweden)

Katty Baca

2010-12-01

Full Text Available In this work was determined the concentration of polyhydroxyalkanoates (PHAs of Azospirillum strains isolated from roots of Lycopersicon esculentum Mill "tomato" and Oryza sativa L. "rice" as an alternative to accumulation of petroleum-based plastics. Previously disinfected root were plated in Nfb semisolid medium where nitrogen-fixing bacteria were recognized by a whitish film on the surface and turn from green to blue. The genus Azospirillum was identified in Congo red agar medium, obtained 96 isolates of A. lipoferum and A. brasilense on tomato and rice. Batch fermentation was performed with broth Azotobacter modified feeding a saturated solution of malic acid every 12 hours and were stained with Sudan Black B. Strains were selected with the greatest number of PHAs granules (in tomato, 18 of A. lipoferum and 2 of A. brasilense; in rice, 10 of A. lipoferum and 10 of A. brasilense and quantified the biomass and PHAs. PHAs concentration reached 0.661 gL-1 in A. lipoferum KM(T-73 and 0.738 gL-1 in A. brasilense KM(T-19, both isolated from tomato. Strains of A. lipoferum and A. brasilense isolated from tomato reached a higher concentration of biomass and PHAs against the strains of rice.

Evaluation of long term radiological impact on population close to remediated uranium mill tailings storages

International Nuclear Information System (INIS)

Kerouanton, David; Delgove, Laure

2008-01-01

A methodology is elaborated in order to evaluate the long term radiological impact of remediated uranium mill tailings storage. Different scenarios are chosen and modelled to cover future evolution of the tailings storages. Radiological impact is evaluated for different population such as adults and children living in the immediate vicinity or directly on the storage, road workers or walkers on the storage. Equation and methods are detailed. (author)

Biomass torrefaction mill

Science.gov (United States)

Sprouse, Kenneth M.

2016-05-17

A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

DETERMINATION OF SPATIAL INTEGRATION AND SUBSTITUTION OF FOREIGN RICE FOR LOCAL RICE IN GHANA

Directory of Open Access Journals (Sweden)

Philip Kofi ADOM

2014-11-01

Full Text Available This study tested for spatial integration in the rice market and the substitution of imported rice for local rice in Ghana. It is established that the markets for domestic imported rice are well-integrated, but not complete. The imperfect spatial integration of domestic foreign rice markets implies that the market provides opportunities for arbitrage. Price leadership roles are found to be determined by the kind of sub-inter-regional-trade network defined. However, in all, the Accra market emerged as a dominant market leader in the domestic foreign rice market. There is evidence of significant regional substitution of foreign rice for local rice in the long run, but the result is mixed in the short run. The result that local rice is not a perfect substitute for imported rice implies that price disincentive measures such as increasing the import tariffs on foreign rice will only produce a mild effect on increasing the producer price faced by local rice farmers, but aggravate the burden on households’ budget.

[Effects of fish on field resource utilization and rice growth in rice-fish coculture].

Science.gov (United States)

Zhang, Jian; Hu, Liang Liang; Ren, Wei Zheng; Guo, Liang; Wu, Min Fang; Tang, Jian Jun; Chen, Xin

2017-01-01

Rice field can provide habitat for fish and other aquatic animals. Rice-fish coculture can increase rice yield and simultaneously reduce the use of chemicals through reducing rice pest occurrence and nutrient complementary use. However, how fish uses food sources (e.g. phytoplankton, weeds, duckweed, macro-algal and snail) from rice field, and whether the nutrients releasing from those food sources due to fish transforming can improve rice growth are still unknown. Here, we conducted two field experiments to address these questions. One was to investigate the pattern of fish activity in the field using the method of video recording. The other was to examine the utilization of field resources by fish using stable isotope technology. Rice growth and rice yield were also exa-mined. Results showed that fish tended to be more active and significantly expanded the activity range in the rice-fish coculture compared to fish monoculture (fish not living together with rice plants). The contributions of 3 potential aquatic organisms (duckweed, phytoplankton and snail) to fish dietary were 22.7%, 34.8% and 30.0% respectively under rice-fish coculture without feed. Under the treatment with feed, however, the contributions of these 3 aquatic organisms to the fish die-tary were 8.9%, 5.9% and 1.6% respectively. The feed contribution was 71.0%. Rice-fish coculture significantly increased the nitrogen concentration in rice leaves, prolonged tillering stage by 10-12 days and increased rice spike rate and yield. The results suggested that raising fish in paddy field may transform the nutrients contained in field resources to bioavailable for rice plants through fish feeding activity, which can improve rice growth and rice yield.

Evaluation of the Dehulling Efficiency of Soybean Using Attrition and ...

African Journals Online (AJOL)

Conditioned seeds were dehulled in the huller section of commercial rice milling machine and attrition milling machine. A dehulling efficiency (e) value of 55%, which corresponded to an extraction yield (E) of 44% was achieved using the huller section of a commercial rice milling machine, while 90% dehulling efficiency (e), ...

Detection of fungi from rice black bug Paraeucosmetus pallicornis Dallas (Hemiptera: Lygaeidae) and inhibition with crude extract of Calatropis gigantea (Asclepiadaceae)

Science.gov (United States)

Sjam, S.; Surapati, U.; Adiwena; Syatri, A.; Dewi, V. S.; Rosmana, A.

2018-05-01

Rice black bug (P. palicornis) is one of the pests that attack the rice plants in the generative phase that causes the rice easily destroyed when milled and tasted bitter after cooking hence reduces the quality and quantity of rice. The bitter taste in rice may be due to the fungus associated with rice black bug. The aimed of this research was to detect the associated fungi with rice black bug P. pallicornis using some sterilization methods and inhibition with of leaf crude extract of C. gigatea. Detection of fungi from P. pallicornis was conducted using three sterilization methods and control (without sterilization) namely: (1) sterilization with aquades + alcohol 70% (5, 10, 15 and 20 times dipping) + aquades; (2) aquades + alcohol 70% (10 and 20 times dipping); (3) Aquades + alcohol 90 %+ NaCl 0.5 % +alcohol 90 % + aquades. Inhibition of fungi from P. pallicornis with crude extract of C. gigantea obtained by maceration method and then made some concentration to see the effect of its inhibition on the fungi associated with the P. pallicornis. The results showed that without sterilization, four microbe were obtained: Gliocladium sp., Aspergillus sp., black hyphae fungus and white hyphae fungus, sterilization method of Aquades + alcohol 70% with 5 times dipping in alcohol obtained Gliocladium sp., 10 and 20 times dipping found Aspergillus sp. and Gliocladium sp and 15 times dipping found Aspergillus sp. Sterilization with 10 and 20 times dipping in alcohol 70% then washing 2 times with aquades found Gliogladium sp. and Aspergillus sp. Sterilization with Aquades + alcohol 90 % + NaCl 0.5% + alcohol 90% + aquades found Gliocladium sp. Crude extract of C. gigantea had the potential to inhibit fungi Aspergillus sp. and Gliocladium sp. from rice black bug.

Effects of White Rice, Brown Rice and Germinated Brown Rice on Antioxidant Status of Type 2 Diabetic Rats

OpenAIRE

Imam, Mustapha Umar; Musa, Siti Nor Asma; Azmi, Nur Hanisah; Ismail, Maznah

2012-01-01

Oxidative stress is implicated in the pathogenesis of diabetic complications, and can be increased by diet like white rice (WR). Though brown rice (BR) and germinated brown rice (GBR) have high antioxidant potentials as a result of their bioactive compounds, reports of their effects on oxidative stress-related conditions such as type 2 diabetes are lacking. We hypothesized therefore that if BR and GBR were to improve antioxidant status, they would be better for rice consuming populations inst...

Differences among Thai Agricultural Workers' Health, Working Conditions, and Pesticide Use by Farm Type.

Science.gov (United States)

Kongtip, Pornpimol; Nankongnab, Noppanun; Mahaboonpeeti, Redeerat; Bootsikeaw, Sasivimol; Batsungnoen, Kiattisak; Hanchenlaksh, Chalalai; Tipayamongkholgul, Mathuros; Woskie, Susan

2018-02-13

More than 11 million Thai people (38%) work in agriculture, but since most are in the informal sector, government enforcement and support are very limited. As a result, working conditions on Thai farms vary greatly, putting the health of many agricultural workers at risk. A cross-sectional study in three Thai provinces collected information on the work activities and conditions of 424 farmers representing five farm types: rice, vegetable, flower, rice/vegetable, and flower/vegetable. The agricultural workers were mainly women (60%); their average age was 53 but ranged from 18 to 87 years. More than 64% worked more than 5 days/week. Seventy-four percent of them had only primary school education. A number of the health and hazardous working conditions surveyed were significantly different by farm type. Rice farmers were found to have the highest prevalence of allergies, nasal congestion, wheezing, and acute symptoms after pesticide use, while flower farmers had the lowest prevalence of these health outcomes. Rice farmers reported the highest prevalence of hazardous working conditions including high noise levels, working on slippery surfaces, sitting or standing on a vibrating machine, spills of chemicals/pesticides, and sharp injuries. The lowest prevalence of these working conditions (except noise) was reported by flower farmers. Vegetable farmers reported the highest prevalence knee problems, while rice farmers had the lowest prevalence. Among these farmers, more than 27 different types of pesticides were reported in use during the past year, with the majority reporting use once a month. The flower/vegetable farming group reported the highest frequency of good exposure prevention practices during pesticide use. They were the most likely to report using cotton or rubber gloves or a disposable paper masks during insecticide spraying. Those farmers who only grew vegetables had the lowest frequency of good exposure prevention practices, including use of personal

Mutant-inducing effect of γ-ray irradiation for hybrid rice F1 derived from cross of black glutinous rice x wild rice

International Nuclear Information System (INIS)

Mao Dezhi; Tang Yilan

1998-01-01

The hybrid rice F 1 plant derived from the back crossing of glutinous rice x wild rice was irradiated with γ-ray. The result of investigation to the induced mutant showed that through the selection and backcross, a black glutinous rice strain with the short stem, cold tolerance and high yield was developed. The analysis of the ability of heredity variance showed that the selection was effective for the husk colour, black glutinous and black Indica rice, but ineffective for the white Indica rice and seed setting

Australian wild rice reveals pre-domestication origin of polymorphism deserts in rice genome.

Science.gov (United States)

Krishnan S, Gopala; Waters, Daniel L E; Henry, Robert J

2014-01-01

Rice is a major source of human food with a predominantly Asian production base. Domestication involved selection of traits that are desirable for agriculture and to human consumers. Wild relatives of crop plants are a source of useful variation which is of immense value for crop improvement. Australian wild rices have been isolated from the impacts of domestication in Asia and represents a source of novel diversity for global rice improvement. Oryza rufipogon is a perennial wild progenitor of cultivated rice. Oryza meridionalis is a related annual species in Australia. We have examined the sequence of the genomes of AA genome wild rices from Australia that are close relatives of cultivated rice through whole genome re-sequencing. Assembly of the resequencing data to the O. sativa ssp. japonica cv. Nipponbare shows that Australian wild rices possess 2.5 times more single nucleotide polymorphisms than in the Asian wild rice and cultivated O. sativa ssp. indica. Analysis of the genome of domesticated rice reveals regions of low diversity that show very little variation (polymorphism deserts). Both the perennial and annual wild rice from Australia show a high degree of conservation of sequence with that found in cultivated rice in the same 4.58 Mbp region on chromosome 5, which suggests that some of the 'polymorphism deserts' in this and other parts of the rice genome may have originated prior to domestication due to natural selection. Analysis of genes in the 'polymorphism deserts' indicates that this selection may have been due to biotic or abiotic stress in the environment of early rice relatives. Despite having closely related sequences in these genome regions, the Australian wild populations represent an invaluable source of diversity supporting rice food security.

Australian wild rice reveals pre-domestication origin of polymorphism deserts in rice genome.

Directory of Open Access Journals (Sweden)

Gopala Krishnan S

Full Text Available BACKGROUND: Rice is a major source of human food with a predominantly Asian production base. Domestication involved selection of traits that are desirable for agriculture and to human consumers. Wild relatives of crop plants are a source of useful variation which is of immense value for crop improvement. Australian wild rices have been isolated from the impacts of domestication in Asia and represents a source of novel diversity for global rice improvement. Oryza rufipogon is a perennial wild progenitor of cultivated rice. Oryza meridionalis is a related annual species in Australia. RESULTS: We have examined the sequence of the genomes of AA genome wild rices from Australia that are close relatives of cultivated rice through whole genome re-sequencing. Assembly of the resequencing data to the O. sativa ssp. japonica cv. Nipponbare shows that Australian wild rices possess 2.5 times more single nucleotide polymorphisms than in the Asian wild rice and cultivated O. sativa ssp. indica. Analysis of the genome of domesticated rice reveals regions of low diversity that show very little variation (polymorphism deserts. Both the perennial and annual wild rice from Australia show a high degree of conservation of sequence with that found in cultivated rice in the same 4.58 Mbp region on chromosome 5, which suggests that some of the 'polymorphism deserts' in this and other parts of the rice genome may have originated prior to domestication due to natural selection. CONCLUSIONS: Analysis of genes in the 'polymorphism deserts' indicates that this selection may have been due to biotic or abiotic stress in the environment of early rice relatives. Despite having closely related sequences in these genome regions, the Australian wild populations represent an invaluable source of diversity supporting rice food security.

Ethanol production from rice on radioactively contaminated field toward sustainable rice farming

International Nuclear Information System (INIS)

Yokoyama, Shinya; Izumi, Bintaro; Oki, Kazuo

2011-01-01

Radioactive species such as 137 Cs were discharged from Fukushima Daiichi Nuclear Power Plant which was severely damaged by the enormous earthquake and tsunami. Cropland has been radioactively contaminated by 137 Cs etc. and it seems impossible to plant rice due to the non-suitability for food. According to the reports, 137 Cs transferred into the rice from soil is less than 1% on the average. Therefore, it is expected that the concentration of 137 Cs in bioethanol will be well below the tentative restriction value even if bioethanol could be produced from the rice. It is proposed that the rice field should be filled with water to avoid the flow of runoff contaminated by radioactive cesium compounds because they are insoluble in aqueous phase and that bioethanol should be produced from the rice in order to maintain the multifunction of rice field and to continue the agriculture. If rice farming is halted and neglected, agricultural function of rice field as well as local community will be permanently destroyed. (author)

Guidelines for the medical surveillance of atomic radiation workers at uranium mines, mills and refineries

International Nuclear Information System (INIS)

1981-01-01

Personnel employed in the mining, milling and refining of uranium ores must, according to Atomic Energy Control Board regulations, be medically examined before beginning employment, at appropriate intervals during their employment, and upon termination. These guidelines are provided for the use of occupational physicians and give advice on procedures to be performed at each type of examination and on the maintenance of medical records. (L.L.)

Prevalence of Rice Yellow Mottle Virus (RYMV) on Rice Plants ...

African Journals Online (AJOL)

Abstract. Incidence of Rice yellow mottle virus (RYMV) on rice plants (ofada) grown in two local government areas (LGAs) of Ogun State had been evaluated during a two year field survey. Six month old rice plants were observed for symptom expression and leaf samples collected for serological indexing. Of the 60 leaf ...

Influence of temperature on hydrogen production from bread mill wastewater by sewage sludge

Energy Technology Data Exchange (ETDEWEB)

Tang, G.L.; Huang, J.; Li, Y.Y.; Sun, Z.J. [China Agricultural Univ., Beijing (China). College of Resources and Environmental Sciences; Tang, Q.Q. [Nanjing Univ., Nanjing (China). Medical School

2008-07-01

Hydrogen (H{sub 2}) energy has been touted as a sustainable and clean energy source that can solve environmental problems such as acid rain, greenhouse gases and transboundary pollution. While most hydrogen is currently produced from nonrenewable sources such as oil, natural gas, and coal, these processes are energy-intensive and costly. The biological production of hydrogen using fermentative bacteria is an environmentally friendly and energy-saving process which has recently attracted much attention as an effective way of converting biomass into H{sub 2}. Waste-based H{sub 2} production processes mainly include wastewater from paper mills, municipal solid waste, rice winery wastewater, and food wastewater from cafeterias. This study investigated the use of bread mill wastewater for biological production of hydrogen due to its high production potential. Annual bread production in China is estimated to be over 1.5 million tons, producing 10 m{sup 3} of wastewater per ton of bread. The wastewater has high chemical oxygen demand and carbohydrate concentrations and is therefore suitable for anaerobic treatment processes. This study evaluated the effect of temperature on H{sub 2} production from bread mill wastewater by sewage sludge in lab-scale experiments. H{sub 2} production, the distribution of volatile fatty acids and the lag-phase time were influenced by temperature. H{sub 2} production and H{sub 2} yield increased with increasing temperature. The optimal temperature for H{sub 2} production was 50 degrees C. Butyrate, acetate and alcohol were the main by-products of H{sub 2} fermentation. According to 16S rDNA analysis, the dominant microflora was Clostridium, but the microbial species varied with temperature. The activation energy for H{sub 2} production was estimated to be 92 kJ per mol for bread mill wastewater. It was concluded that bread mill wastewater could potentially serve as a substrate for H{sub 2} production. This research provides a means of

An overview of the sustainability of rice agroecosystem through rice-fish integration

International Nuclear Information System (INIS)

Ahyaudin Ali

2002-01-01

Rice-fish integration in the rice agroecosystem has been introduced and is expanding in Malaysia. This type of farm integration has resulted in land optimization, thus enabling farmers to grow both fish and rice in one farming system. Introducing fish into the ricefield has also increased seasonal income as well as reduced pesticide use. Although basic ecological knowledge on rice-fish integration has allowed rice-fish integration to be introduced, further research is required to allow for fine tuning of the methodologies used. Thus research on the ecology, management, production methods and the characterization of rice-fish farming system of Malaysia is needed. Further characterization and description is needed on the ecology of the rice-fish farming system of Malaysia in terms of production, food webs, nutrient flow and system diversity. To increase the sustainability efficiency and productivity of the system, implementation of management techniques formulated through research is required. (Author)

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

OpenAIRE

Garc?a Nieto, Paulino Jos?; Garc?a-Gonzalo, Esperanza; Ord??ez Gal?n, Celestino; Bernardo S?nchez, Antonio

2016-01-01

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism i...

Objective evaluation of whiteness of cooked rice and rice cakes using a portable spectrophotometer.

Science.gov (United States)

Goto, Hajime; Asanome, Noriyuki; Suzuki, Keitaro; Sano, Tomoyoshi; Saito, Hiroshi; Abe, Yohei; Chuba, Masaru; Nishio, Takeshi

2014-03-01

The whiteness of cooked rice and rice cakes was evaluated using a portable spectrophotometer with a whiteness index (WI). Also, by using boiled rice for measurement of Mido values by Mido Meter, it was possible to infer the whiteness of cooked rice without rice cooking. In the analysis of varietal differences of cooked rice, 'Tsuyahime', 'Koshihikari' and 'Koshinokaori' showed high whiteness, while 'Satonoyuki' had inferior whiteness. The whiteness of rice cakes made from 'Koyukimochi' and 'Dewanomochi' was higher than the whiteness of those made from 'Himenomochi' and 'Koganemochi'. While there was a significant correlation (r = 0.84) between WI values and whiteness scores of cooked rice by the sensory test, no correlation was detected between the whiteness scores and Mido values, indicating that the values obtained by a spectrophotometer differ from those obtained by a Mido Meter. Thus, a spectrophotometer may be a novel device for measurement of rice eating quality.

Beneficial uses of paper mill residuals for New York State`s recycled-paper mills. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This report evaluates the New York paper mill industry in terms of the productive management and treatment of solid wastes. It identifies current efforts by recycling mills to beneficially use paper mill residuals (often called sludge) and suggests additional options that should be considered by the industry in general and individual mills in particular. It also examines the regulations and economics affecting the mills and suggests actions that could improve the industry`s ability to convert wastes to value-added products. The report recommends that the mills should continue measures to reduce fiber and filler clay losses, promote the transfer of usable fiber and clay to mills able to use them, upgrade sludge dewatering capabilities, and take a more regional approach to solid waste disposal problems. State agencies are urged to support these efforts, encourage the development and commercialization of new beneficial use technologies, and reduce regulatory barriers whenever possible.

31 CFR Appendix A to Part 538 - Bulk Agricultural Commodities

Science.gov (United States)

2010-07-01

... Rice in the husk (paddy or rough) 1006.20 Husked (brown) Rice 1006.30 Semi-milled or wholly milled Rice....91 Sugar Beets, fresh, chilled, frozen or dried 1212.92 Sugar Cane, fresh, chilled, frozen or dried 1701.11 Cane Sugar, raw, solid form 1701.12 Beet Sugar, raw, solid form 1701.91 Cane or Beet Sugar...

31 CFR Appendix B to Part 560 - Bulk Agricultural Commodities

Science.gov (United States)

2010-07-01

... Rice in the husk (paddy or rough) 1006.20 Husked (brown) Rice 1006.30 Semi-milled or wholly milled Rice....91 Sugar Beets, fresh, chilled, frozen or dried 1212.92 Sugar Cane, fresh, chilled, frozen or dried 1701.11 Cane Sugar, raw, solid form 1701.12 Beet Sugar, raw, solid form 1701.91 Cane or Beet Sugar...

Puffing of okara/rice blends using a rice cake machine.

Science.gov (United States)

Xie, M; Huff, H; Hsieh, F; Mustapha, A

2008-10-01

Okara is the insoluble byproduct of soymilk and tofu manufactures. It is cheap, high in nutrients, and possesses great potential to be applied to functional human foods. In this study, a puffed okara/rice cake product was developed with blends of okara pellets and parboiled rice. Consumer preference and acceptance tests were conducted for the product. Okara pellets were prepared by grinding the strands obtained from extruding a mixture of dried okara and rice flour (3:2, w/w) with a twin-screw extruder. Okara pellets and parboiled rice were blended in 4 ratios, 90:10, 70:30, 40:60, and 0:100 (w/w), and tempered to 14% and 17% moisture. The blends were puffed at 221, 232, and 243 degrees C for 4, 5, or 6 s. The okara/rice cakes were evaluated for specific volume (SPV), texture, color, and percent weight loss after tumbling. Overall, the decrease in okara content and increase in moisture, heating temperature and time led to greater specific volume (SPV) and hardness, lighter color, and lower percent weight loss after tumbling. The consumer tests indicated that the okara/rice cake containing 70% okara pellets was preferred and the 90% one was liked the least. The possible drivers of liking for the puffed okara/rice cakes could be the okara content, hardness, SPV, bright color, and percent weight loss after tumbling.

Diversity of some endophytic fungi associated with rice black bug Paraeucosmetus pallicornis on rice plant

OpenAIRE

Nur, Amin; La Daha; Nurariaty, Agus; Ade, Rosmana; Muh., Fadlan

2015-01-01

A new rice insect pest was sighted in some rice producing areas of South Sulawesi Province, Indonesia. This pest is rice black bugs Paraeucosmetus pallicornis. The research aimed to isolation of fungi associated with rice black bugs Paraeucosmetus pallicornis, so as to know the cause of a bitter taste to the rice. The isolation of the fungi consist of three kinds of treatment, namely rice black bugs without sterilization, with sterilization and rice black bugs cut and sterilized. The resul...

Effect of paddy drying depth using open-sun drying on drying time ...

African Journals Online (AJOL)

The smallholder rice farmers in the Uganda dry their paddy using open-sun drying method. In most cases the paddy is badly dried and has very high fissure levels. Such paddy on milling contributes to low levels of mill recovery and whole grain in the milled rice. This study was therefore done to find a recommendable ...

RiceAtlas, a spatial database of global rice calendars and production

NARCIS (Netherlands)

Laborte, Alice G.; Gutierrez, Mary Anne; Balanza, Jane Girly; Saito, Kazuki; Zwart, Sander; Boschetti, Mirco; Murty, M. V.R.; Villano, Lorena; Aunario, Jorrel Khalil; Reinke, Russell; Koo, Jawoo; Hijmans, Robert J.; Nelson, Andrew

2017-01-01

Knowing where, when, and how much rice is planted and harvested is crucial information for understanding the effects of policy, trade, and global and technological change on food security. We developed RiceAtlas, a spatial database on the seasonal distribution of the world's rice production. It

The Potency of White Rice (Oryza sativa), Black Rice (Oryza sativa L. indica), and Red Rice (Oryza nivara) as Antioxidant and Tyrosinase Inhibitor

Science.gov (United States)

Batubara, I.; Maharni, M.; Sadiah, S.

2017-04-01

Rice is known to have many beneficial biological activities and is often used as “bedak dingin”, a face powder. The content of vitamins, minerals, fiber, and several types of antioxidants, such as ferulic acid, phytic acid, tocopherol, and oryzanols [1-2] are predicted to be potential as a tyrosinase inhibitor. The purpose of this study is to determine the potency of extracts from there types of rice, namely white, red, and black rice as an antioxidant and tyrosinase inhibitor. The rice was extracted with three different solvents, n-hexane, ethyl acetate, and methanol. The results showed that the highest antioxidant activity using 1,1-diphenyl-2-picrylhydrazyl method was found in the methanol extract of black rice (IC50 290 μg/mL). Meanwhile, ethyl acetate extract of white rice has the highest antioxidant activity withphosphomolybdic acid method (41 mmol α-tocopherol equivalents/g sample). Thus, methanol extract of black rice and ethyl acetate extract of white rice are potential as an antioxidant. For tyrosinase inhibitor, n-hexane extract of red rice (IC50 3156 μg/mL) was the most active extract. The active component for radical scavenging is polar compound and for antioxidant by phosphomolybdate method is less polar compounds in black rice methanol extract based on TLC bioautogram. In conclusion, the black rice is the most potent in antioxidant while red rice is for tyrosinase inhibition.

Effect of Rice bran on the Quality of Rice Flour Breads (Gluten-free)

OpenAIRE

仲上, 晴世; 矢部, えん; Haruyo, Nakagami; En, Yabe

2016-01-01

Over recent years progress has been made in the development of substitute foods for allergy patients. One such is rice flour bread. However, typically rice flour bread uses polysaccharide thickener in substitution for the gluten in wheat. Most polysaccharide thickeners are of dietary fiber origin, and the nutritive value is poor. Therefore, in this study, I made rice flour bread adding rice bran in place of polysaccharide thickener. Various nutrients are included in rice bran, including vitam...

Rice peasants and rice research in Colombia

NARCIS (Netherlands)

Spijkers, P.A.N.M.

1983-01-01

Rice has been grown as a food crop in Latin America from early colonial times. In Colombia rice became a prominent subsistence crop especially on the north coast where it has been grown since the 17th century, sometimes also as a commercial crop. During the last twenty years there has been a sharp

Leaf development of cultivated rice and weedy red rice under elevated temperature scenarios

OpenAIRE

Streck,Nereu A.; Uhlmann,Lilian O.; Gabriel,Luana F.

2013-01-01

The objective of this study was to simulate leaf development of cultivated rice genotypes and weedy red rice biotypes in climate change scenarios at Santa Maria, RS, Brazil. A leaf appearance (LAR) model adapted for rice was used to simulate the accumulated leaf number, represented by the Haun Stage, from crop emergence to flag leaf appearance (EM-FL). Three cultivated rice genotypes and two weedy red rice biotypes in six emergence dates were used. The LAR model was run for each emergence dat...

Airborne effluent control at uranium mills

International Nuclear Information System (INIS)

Sears, M.B.

1976-01-01

The Oak Ridge National Laboratory has made an engineering cost--environmental benefit study of radioactive waste treatment systems for decreasing the amount of radioactive materials released from uranium ore processing mills. This paper summarizes the results of the study which pertain to the control and/or abatement of airborne radioactive materials from the mill processes. The tailings area is not included. Present practices in the uranium milling industry, with particular emphasis on effluent control and waste management, have been surveyed. A questionnaire was distributed to each active mill in the United States. Replies were received from about 75 percent of the mill operators. Visits were made to six operating uranium mills that were selected because they represented the different processes in use today and the newest, most modern in mill designs. Discussions were held with members of the Region IV Office of NRC and the Grand Junction Office of ERDA. Nuclear Science Abstracts, as well as other sources, were searched for literature pertinent to uranium mill processes, effluent control, and waste management

FM Interviews: Stephanie Mills

OpenAIRE

Valauskas, Edward

2002-01-01

Stephanie Mills is an author, editor, lecturer and ecological activist who has concerned herself with the fate of the earth and humanity since 1969, when her commencement address at Mills College in Oakland, Calif., drew the attention of a nation. Her speech, which the New York Times called "perhaps the most anguished statement" of the year's crop of valedictory speeches, predicted a bleak future. According to Mills, humanity was destined for suicide, the result of overpopulation and overuse ...

Nutritional test of rice in rats

International Nuclear Information System (INIS)

Horii, Masaji; Yoshikawa, Seiji

1980-01-01

Behaviors on N derived from rice were followed up by means of 15 N-labeled rice. In the first test, the single unpolished rice diet and the diet of rice and bean lecithin (4.5%) produced urinary excretion of 10 - 12% of 15 N, and that of rice and mannan from devil's tongue (3%), 16 - 20%. The single unpolished rice diet showed slightly more urinary excretion of 15 N, and the other 2 diets showed a similar proportion of 15 N in 3 days. The results indicated that the diet containing mannan from devil's tongue resulted in a poor N absorption by rice, a large quantity of N being excreted over a long period of time. This suggested differences and time lags in the excretion of rice N into the stool and urine depending on the diet constitution. With the unpolished rice diet, a small quantity of rice protein was not absorbed, but was excreted. In the 2nd test with 15 N-polished rice, the urinary excretion rate was 11.44% for a single rice diet, 11.16% for a mixed diet of rice and bean (1:1 in protein), 10.99% for rice and egg yolk, 9.66% for rice, bean and egg yolk and 8.10% for rice and bean lecithin. This decrease in urinary excretion indicated a corresponding increase in absorption of rice protein. (Chiba, N.)

Rough mill simulator version 3.0: an analysis tool for refining rough mill operations

Science.gov (United States)

Edward Thomas; Joel Weiss

2006-01-01

ROMI-3 is a rough mill computer simulation package designed to be used by both rip-first and chop-first rough mill operators and researchers. ROMI-3 allows users to model and examine the complex relationships among cutting bill, lumber grade mix, processing options, and their impact on rough mill yield and efficiency. Integrated into the ROMI-3 software is a new least-...

Basic studies on the efficacy of gamma irradiation as insect disinfestation and sterilising techniques for stored rice insects

International Nuclear Information System (INIS)

Abdul Rahim Muda.

1987-01-01

Basic laboratory evaluations on the efficacy of gamma irradiation on the insect sitophilus zeamais, Motch. showed this method of insect control is effective to disinfest both internal and surface infestations in stored milled rice, and substantially reduced reproductive potentials of the weevil. Adult emergence of treated larvae developing within the rice kernel reduced by an average of 82% for treatment doses of 0.05 to 1 kGy. All emerged adults died within 16 days upon emergence at all tested doses. Radiated adult insects showed 100% mortality within 18 days at doses above 0.15 kGy; 26 days at 0.1 kGy and 33 days at 0.05 kGy. However none of the tested doses recorded total immediate mortality after treatment. Significant sterility effects through 93% reduction in F 1 progenies can be achieved by sterilising both parents; but none of the tested doses showed potential for employment as male sterilising technique alone. (author)

Asian wild rice is a hybrid swarm with extensive gene flow and feralization from domesticated rice.

Science.gov (United States)

Wang, Hongru; Vieira, Filipe G; Crawford, Jacob E; Chu, Chengcai; Nielsen, Rasmus

2017-06-01

The domestication history of rice remains controversial, with multiple studies reaching different conclusions regarding its origin(s). These studies have generally assumed that populations of living wild rice, O. rufipogon , are descendants of the ancestral population that gave rise to domesticated rice, but relatively little attention has been paid to the origins and history of wild rice itself. Here, we investigate the genetic ancestry of wild rice by analyzing a diverse panel of rice genomes consisting of 203 domesticated and 435 wild rice accessions. We show that most modern wild rice is heavily admixed with domesticated rice through both pollen- and seed-mediated gene flow. In fact, much presumed wild rice may simply represent different stages of feralized domesticated rice. In line with this hypothesis, many presumed wild rice varieties show remnants of the effects of selective sweeps in previously identified domestication genes, as well as evidence of recent selection in flowering genes possibly associated with the feralization process. Furthermore, there is a distinct geographical pattern of gene flow from aus , indica , and japonica varieties into colocated wild rice. We also show that admixture from aus and indica is more recent than gene flow from japonica , possibly consistent with an earlier spread of japonica varieties. We argue that wild rice populations should be considered a hybrid swarm, connected to domesticated rice by continuous and extensive gene flow. © 2017 Wang et al.; Published by Cold Spring Harbor Laboratory Press.

An Economic Risk Analysis of Weed Suppressive Rice Cultivars in Rice Production

Science.gov (United States)

Weeds are a major constraint to rice production. In the United States, most rice cultivars are not inherently weed-suppressive and require substantial herbicide inputs to achieve agronomic and economic viability. Intensive herbicide application in rice also has many potential drawbacks, resulting in...

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data.

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-28

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC-MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc . Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC-MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Directory of Open Access Journals (Sweden)

Paulino José García Nieto

2016-01-01

Full Text Available Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC in combination with multivariate adaptive regression splines (MARS technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-01

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed. PMID:28787882

Effect of milling time on microstructure and properties of Nano-titanium polymer by high-energy ball milling

Science.gov (United States)

Wang, Bo; Wei, Shicheng; Wang, Yujiang; Liang, Yi; Guo, Lei; Xue, Junfeng; Pan, Fusheng; Tang, Aitao; Chen, Xianhua; Xu, Binshi

2018-03-01

Nano-titanium (Nano-Ti) was prepared by high-energy ball milling from pure Ti power and grinding agents (Epoxy resin) at room temperature. The effect of milling time on structure and properties of Nano-Ti polymer were investigated systematically. The results show that high-energy ball milling is an effective way to produce Nano-Ti polymer. The dispersion stability and compatibility between Ti power and grinding agents are improved by prolonging the milling time at a certain degree, that is to say, the optimization milling time is 240 min. The particle size of Ti powder and the diffraction peaks intensity of Ti decrease obviously as the milling time increases due to the compression stress, shear friction and other mechanical forces are formed during ball milling. FT-IR result displays that the wavenumber of all the bands move to lower wavenumber after ball milling, and the epoxy ring is open. The system internal energy rises owing to the broken epoxy group and much more Nano-Ti is formed to promote the grafting reaction between Nano-Ti and epoxy resin. The results from TEM and XPS also prove that. And the grafting ration is maximum as the milling time is 240 min, the mass loss ratio is 17.53%.

Soil to rice transfer factors for 210Pb: a study on rice grown in India

International Nuclear Information System (INIS)

Karunakara, N.; Rao, Chetan; Ujwal, P.; Yashodhara, I.; Sudeep Kumara; Somashekarappa, H.M.; Bhaskara Shenoy, K.; Ravi, P.M.

2013-01-01

India is the second largest producer of rice (Oryza sativa L.) in the world and rice is the essential component of the diet for the majority of the population of India. However, detailed studies aimed at evaluation of radionuclide transfer factors (F v ) for rice grown in India are almost non-existent. This paper presents soil to rice transfer factors for 210 Pb for rice grown in natural field conditions on the West Coast of India. A rice field was developed very close to the Kaiga nuclear power plant for the field studies. For a comparative study of radionuclide transfer factors, rice samples were also collected from the rice fields of nearby villages. The soil to un-hulled rice grain 210 Pb varied in the range <1.2 x10 -2 to 8.1 x 10 -1 with a mean of 1.4 x 10 -1 . The mean values of un-hulled grain to white rice processing retention factors (F r ) was 0.03 for 210 Pb. Using the processing retention factors the soil to white rice transfer factor was estimated and found to have the mean value of 4.2 x 10 -3 . The study has shown that the transfer of 210 Pb was retained in the root and its transfer to above ground organs of rice plant is significantly lower. (author)

A comparative study of competitiveness between different genotypes of weedy rice (Oryza sativa) and cultivated rice.

Science.gov (United States)

Dai, Lei; Dai, Weimin; Song, Xiaoling; Lu, Baorong; Qiang, Sheng

2014-01-01

Competition from weedy rice can cause serious yield losses to cultivated rice. However, key traits that facilitate competitiveness are still not well understood. To explore the mechanisms behind the strong growth and competitive ability, replacement series experiments were established with six genotypes of weedy rice from different regions and one cultivated rice cultivar. (1) Weedy rice from southern China had the greatest impact on growth and yield of cultivated rice throughout the entire growing season. Weedy rice from the northeast was very competitive during the early vegetative stage while the competitive effects of eastern weedy rice were more detrimental at later crop-growth stages. (2) As the proportion of weedy rice increased, plant height, tillers, above-ground biomass, and yield of cultivated rice significantly declined; the crop always being at disadvantage regardless of proportion. (3) Weedy biotypes with greater diversity as estimated by their Shannon indexes were more detrimental to the growth and yield of cultivated rice. Geographic origin (latitude) of weedy rice biotype, its mixture proportion under competition with the crop and its genetic diversity are determinant factors of the outcome of competition and the associated decline in the rice crop yield. © 2013 Society of Chemical Industry. © 2013 Society of Chemical Industry.

Focused ion beam milling of carbon fibres

International Nuclear Information System (INIS)

Huson, Mickey G.; Church, Jeffrey S.; Hillbrick, Linda K.; Woodhead, Andrea L.; Sridhar, Manoj; Van De Meene, Allison M.L.

2015-01-01

A focused ion beam has been used to mill both individual carbon fibres as well as fibres in an epoxy composite, with a view to preparing flat surfaces for nano-indentation. The milled surfaces have been assessed for damage using scanning probe microscopy nano-indentation and Raman micro-probe analysis, revealing that FIB milling damages the carbon fibre surface and covers surrounding areas with debris of disordered carbon. The debris is detected as far as 100 μm from the milling site. The energy of milling as well as the orientation of the beam was varied and shown to have an effect when assessed by Raman spectroscopy. - Highlights: • Focused ion beam (FIB) milling was used to mill flat surfaces on carbon fibres. • Raman spectroscopy showed amorphous carbon was generated during FIB milling. • The amorphous debris is detected as far as 100 μm from the milling site. • This surface degradation was confirmed by nano-indentation experiments.

Diversity of global rice markets and the science required for consumer-targeted rice breeding

Science.gov (United States)

With the ever-increasing global demand for high quality rice in both local production regions and with Western consumers, we have a strong desire to understand better the importance of different quality traits that make up the rice grain and obtain a full picture of rice quality demographics. Rice ...

Laboratory Screening for Resistance in Rice to Rice Stem Borer Chilo Suppressalis Walker

International Nuclear Information System (INIS)

Singgih Sutrisno

2004-01-01

Rice stem borer Chilo suppressalis Walker is one of the major insect pests in rice in Indonesia. The use of insect pest resistant variety of rice is one of the effective techniques against pests. Breeding of resistance to insect pests rice crops often faced difficulties in obtaining a lot of insect amounts due to the unavailability of enough number insects pests in the field so that a laboratory bioassay is needed. In this experiments five rice varieties were used: a Pelita I/1, Atomita I, Cisadane, Cisanggarung, and IR 36. Rice seedling 7 days of age were put in 1 liter plastic vials for rice resistance test against the attack of insect pest C. suppressalis. The parameters observed were larval and pupal viability, pupal weight, and eggs production. The larval and pupal viability which were reared on of Pelita I/1 and Atomita I rice seedlings were 68.5 % - 55.5 % and 57.3 % - 46.7 % respectively. The respective lowest percentages were found in IR 36 which was about 41.3 % - 29.8 % .The experiment results on the parameters of pupal weight and egg production showed similar results to that on the parameters of larval and pupal viability. Rice variety of IR 36 showed more resistance to the other varieties, while Pelita I/1 and Atomita I showed the most susceptible to the attack of insect pest C. suppressalis. (author)

Creation of transgenic rice plants producing small interfering RNA of Rice tungro spherical virus.

Science.gov (United States)

Le, Dung Tien; Chu, Ha Duc; Sasaya, Takahide

2015-01-01

Rice tungro spherical virus (RTSV), also known as Rice waika virus, does not cause visible symptoms in infected rice plants. However, the virus plays a critical role in spreading Rice tungro bacilliform virus (RTBV), which is the major cause of severe symptoms of rice tungro disease. Recent studies showed that RNA interference (RNAi) can be used to develop virus-resistance transgenic rice plants. In this report, we presented simple procedures and protocols needed for the creation of transgenic rice plants capable of producing small interfering RNA specific against RTSV sequences. Notably, our study showed that 60 out of 64 individual hygromycin-resistant lines (putative transgenic lines) obtained through transformation carried transgenes designed for producing hairpin double-stranded RNA. Northern blot analyses revealed the presence of small interfering RNA of 21- to 24-mer in 46 out of 56 confirmed transgenic lines. Taken together, our study indicated that transgenic rice plants carrying an inverted repeat of 500-bp fragments encoding various proteins of RTSV can produce small interfering RNA from the hairpin RNA transcribed from that transgene. In light of recent studies with other viruses, it is possible that some of these transgenic rice lines might be resistant to RTSV.

A Non-destructive and Continuous Measurement of Gelatinization of Rice in Rice Cooking Process

OpenAIRE

Hagura, Yoshio; Suzuki, Kanichi

2002-01-01

A non-destructive and continuous method to measure gelatinization of rice samples in a rice-water system during rice cooking process was examined. An aluminum pot and a lid of a rice cooker were used as two electrode plates, and changes in dielectric properties (capacitance : C, and dielectric dissipation factor : tan δ) of the samples in the rice cooking process were measured by a capacitance meter. Differential scanning calorimetry (DSC) was used to measure gelatinization enthalpy and to de...

Guide to the bioassay of uranium at uranium mine-mill facilities

International Nuclear Information System (INIS)

1981-01-01

As a result of occupational exposure, uranium may be taken into the body by inhalation, ingestion or absorption through skin wounds. The organs at risk are the lung, kidney, and bones. Analysis of urine samples for uranium is recommended on a regular monthly basis, before and after a rest period, and it is suggested that a worker be removed from a working area if a level above 300 μg/l is found before a rest period, or 150 μg/l after a rest period. Background information on the development of a bioassay program is given, and a recommended program for uranium mine and mill facilities is included. (L.L.)

Rice mutants obtained through sodium azide (NaN3) treatment

International Nuclear Information System (INIS)

Silva, E.F.; Ando, A.; Tulmann Neto, A.

2001-01-01

The successful utilization of sodium azide to generate genetic variability in plant breeding has been reported in barley, rice, and other crops. Rice seeds of 'Dourado Precoce', Brazilian upland cultivar, were treated with 5x10 -3 M of sodium azide, prepared in buffer solution of pH 3,0, for 8 hours at laboratory temperature. Ten short culm mutant lines were selected in the M 2 , M 3 and M 4 generations. In the M 5 generation, the mutant lines were evaluated for flowering and maturing cycles, tiller number per plant, plant height, panicle number per m 2 , panicle length, fertility of panicle, weight of 1.000 grains, productivity, percentage of intact grains after milling, width and thickness of peeled and polished grains and length/width grain ratio. The experiment was conducted in the Centro Experimental of Instituto Agronomico, Campinas, Sao Paulo, Brazil, during the period of 1993/94, utilizing randomized block design with four replications. Each experimental plot consisted of five rows of four meters in length, 50 cm between rows, with 75 seeds sown per meter. The cultivar 'IAC 201' and the original Dourado Precoce were planted as checks. All observations were made on the three central rows of each experimental plot. The data was analysed by the SANEST statistical program and the mean values were discriminated by the Tukey's test at the level 5% of probability

Rice varieties in relation to rice bread quality.

Science.gov (United States)

Han, Hye Min; Cho, Jun Hyeon; Kang, Hang Won; Koh, Bong Kyung

2012-05-01

It is difficult to predict rice bread quality only from the amylose content (AC) or dough characteristics of new lines produced by rice breeding programmes. This study investigated the AC relative to bread baking quality of rice varieties developed in Korea, and identified specific characteristics that contribute to rice bread quality. Manmibyeo, Jinsumi, Seolgaeng and Hanareumbyeo were classified as low AC, YR24088 Acp9, Suweon517, Chenmaai and Goamibyeo as intermediate AC and Milyang261 as high AC. Suweon517, Milyang261 and Manmibyeo had a high water absorption index (WAI), while Goamibyeo, YR24088 Acp9, Jinsumi, Seolgaeng, Hanareumbyeo and Chenmaai had a low WAI. The gelatinisation enthalpy of flour varied from 9.2 J g(-1) in Milyang261 to 14.8 J g(-1) in YR24088 Acp9. After 7 days of storage the rate of flour retrogradation and crumb firmness were weakly correlated, with the exception of Jinsumi. Bread volumes of Jinsumi, Chenmaai, YR24088 Acp9 and Goamibyeo were comparable to that of wheat flour, but the rest were unsuited to bread making because of their low volume and hard crumb texture. Based on volume, texture and crumb firmness ratio, Chenmaai and Goamibyeo were the most appropriate varieties for making bread. An intermediate AC and low WAI were the primary indicators of rice bread flour quality. Copyright © 2011 Society of Chemical Industry.

Salinity alters the protein composition of rice endosperm and the physicochemical properties of rice flour.

Science.gov (United States)

Baxter, Graeme; Zhao, Jian; Blanchard, Christopher

2011-09-01

Salinity is one of the major threats to production of rice and other agricultural crops worldwide. Although numerous studies have shown that salinity can severely reduce rice yield, little is known about its impact on the chemical composition, processing and sensory characteristics of rice. The objective of the current study was to investigate the effect of salinity on the pasting and textural properties of rice flour as well as on the protein content and composition of rice endosperm. Rice grown under saline conditions had significantly lower yields but substantially higher protein content. The increase in protein content was mainly attributed to increases in the amount of glutelin, with lesser contributions from albumin. Salinity also altered the relative proportions of the individual peptides within the glutelin fraction. Flours obtained from rice grown under saline conditions showed significantly higher pasting temperatures, but lower peak and breakdown viscosities. Rice gels prepared from the flour showed significantly higher hardness and adhesiveness values, compared to the freshwater controls. Salinity can significantly affect the pasting and textural characteristics of rice flour. Although some of the effects could be attributed to changes in protein content of the rice flour, especially the increased glutelin level, the impact of salinity on the physicochemical properties of rice is rather complex and may involve the interrelated effects of other rice components such as starch and lipids. Copyright © 2011 Society of Chemical Industry.

Assessing the impacts of climate change on rice yields in the main rice areas of China

International Nuclear Information System (INIS)

Yao, Fengmei; Xu, Yinglong; Lin, Erda; Yokozawa, Masayuki; Zhang, Jiahua

2007-01-01

This paper assesses the impact of climate change on irrigated rice yield using B2 climate change scenario from the Regional Climate Model (RCM) and CERES-rice model during 2071--2090. Eight typical rice stations ranging in latitude, longitude, and elevation that are located in the main rice ecological zones of China are selected for impact assessment. First, Crop Estimation through Resource and Environment Synthesis (CERES)-rice model is validated using farm experiment data in selected stations. The simulated results represent satisfactorily the trend of flowering duration and yields. The deviation of simulation within ± 10% of observed flowering duration and ± 15% of observed yield. Second, the errors of the outputs of RCM due to the difference of topography between station point and grid point is corrected. The corrected output of the RCM used for simulating rice flowering duration and yield is more reliable than the not corrected. Without CO2 direct effect on crop, the results from the assessment explore that B2 climate change scenario would have a negative impact on rice yield at most rice stations and have little impacts at Fuzhou and Kunming. To find the change of inter-annual rice yield, a preliminary assessment is made based on comparative cumulative probability at low and high yield and the coefficient variable of yield between the B2 scenario and baseline. Without the CO2 direct effect on rice yield, the result indicates that frequency for low yield would increase and it reverses for high yield, and the variance for rice yield would increase. It is concluded that high frequency at low yield and high variances of rice yield could pose a threat to rice yield at most selected stations in the main rice areas of China. With the CO2 direct effect on rice yield, rice yield increase in all selected stations

Assessing the impacts of climate change on rice yields in the main rice areas of China

Energy Technology Data Exchange (ETDEWEB)

Yao, Fengmei [College of Earth Sciences, The Graduate University of the Chinese Academy of Sciences, 19A, Yuquan Road, Beijing, 100049 (China); Xu, Yinglong; Lin, Erda [Agricultural Environment and Sustainable Development Institute, Chinese Academy of Agricultural Sciences, Beijing, 100081 (China); Yokozawa, Masayuki [National Institute for Agro-environmental Sciences, Tsukuba 305-8604 (Japan); Zhang, Jiahua [Chinese Academy of Meteorological Sciences, Beijing, 100081 (China)

2007-02-15

This paper assesses the impact of climate change on irrigated rice yield using B2 climate change scenario from the Regional Climate Model (RCM) and CERES-rice model during 2071--2090. Eight typical rice stations ranging in latitude, longitude, and elevation that are located in the main rice ecological zones of China are selected for impact assessment. First, Crop Estimation through Resource and Environment Synthesis (CERES)-rice model is validated using farm experiment data in selected stations. The simulated results represent satisfactorily the trend of flowering duration and yields. The deviation of simulation within {+-} 10% of observed flowering duration and {+-} 15% of observed yield. Second, the errors of the outputs of RCM due to the difference of topography between station point and grid point is corrected. The corrected output of the RCM used for simulating rice flowering duration and yield is more reliable than the not corrected. Without CO2 direct effect on crop, the results from the assessment explore that B2 climate change scenario would have a negative impact on rice yield at most rice stations and have little impacts at Fuzhou and Kunming. To find the change of inter-annual rice yield, a preliminary assessment is made based on comparative cumulative probability at low and high yield and the coefficient variable of yield between the B2 scenario and baseline. Without the CO2 direct effect on rice yield, the result indicates that frequency for low yield would increase and it reverses for high yield, and the variance for rice yield would increase. It is concluded that high frequency at low yield and high variances of rice yield could pose a threat to rice yield at most selected stations in the main rice areas of China. With the CO2 direct effect on rice yield, rice yield increase in all selected stations.

Surface Quality of Staggered PCD End Mill in Milling of Carbon Fiber Reinforced Plastics

Directory of Open Access Journals (Sweden)

Guangjun Liu

2017-02-01

Full Text Available Machined surface quality determines the reliability, wear resistance and service life of carbon fiber reinforced plastic (CFRP workpieces. In this work, the formation mechanism of the surface topography and the machining defects of CFRPs are proposed, and the influence of milling parameters and fiber cutting angles on the surface quality of CFRPs is obtained, which can provide a reference for extended tool life and good surface quality. Trimming and slot milling tests of unidirectional CFRP laminates are performed. The surface roughness of the machined surface is measured, and the influence of milling parameters on the surface roughness is analyzed. A regression model for the surface roughness of CFRP milling is established. A significance test of the regression model is conducted. The machined surface topography of milling CFRP unidirectional laminates with different fiber orientations is analyzed, and the effect of fiber cutting angle on the surface topography of the machined surface is presented by using a digital super depth-of-field microscope and scanning electron microscope (SEM. To study the influence of fiber cutting angle on machining defects, the machined topography under different fiber orientations is analyzed. The slot milling defects and their formation mechanism under different fiber cutting angles are investigated.

Radiation disinfestation of Basmati rice

International Nuclear Information System (INIS)

Rao, V.S.; Gholap, A.S.; Adhikari, H.R.; Nair, P.M.

1994-01-01

Effect of low dose γ-radiation on prepackaged Basmati rice was studied in order to achieve disinfestation of rice. Basmati rice procured from local market was repacked in 1 kg pouches made from high density polyethylene (HDP) and biaxially oriented polypropylene: low density polyethylene (BOPP/LDP) laminate and irradiated at doses from 0.25-1.0 kGy. Within one month of storage at room temperature, unirradiated (control) Basmati rice developed heavy infestation. No infestation was observed in any of the irradiated samples even at 0.25 kGy and the rice could be stored for 6 months in a clean state. Irradiation (at 0.25 kGy) did not alter the moisture content of the rice. Likewise, no significant change was noted due to irradiation in the functional properties of rice such as swelling index and water absorption and in total volatile components responsible for flavour of Basmati rice. In organoleptic evaluation, no significant difference was found between the acceptability of irradiated (0.25 kGy) and control rice. These results are significant in view of the high export potential of Basmati rice and the transit losses at present due to infestation. (author). 24 refs., 5 tabs., 1 fig

Cytoplasmic-genetic male sterility gene provides direct evidence for some hybrid rice recently evolving into weedy rice

Science.gov (United States)

Zhang, Jingxu; Lu, Zuomei; Dai, Weimin; Song, Xiaoling; Peng, Yufa; Valverde, Bernal E.; Qiang, Sheng

2015-01-01

Weedy rice infests paddy fields worldwide at an alarmingly increasing rate. There is substantial evidence indicating that many weedy rice forms originated from or are closely related to cultivated rice. There is suspicion that the outbreak of weedy rice in China may be related to widely grown hybrid rice due to its heterosis and the diversity of its progeny, but this notion remains unsupported by direct evidence. We screened weedy rice accessions by both genetic and molecular marker tests for the cytoplasmic male sterility (CMS) genes (Wild abortive, WA, and Boro type, BT) most widely used in the production of indica and japonica three-line hybrid rice as a diagnostic trait of direct parenthood. Sixteen weedy rice accessions of the 358 tested (4.5%) contained the CMS-WA gene; none contained the CMS-BT gene. These 16 accessions represent weedy rices recently evolved from maternal hybrid rice derivatives, given the primarily maternal inheritance of this trait. Our results provide key direct evidence that hybrid rice can be involved in the evolution of some weedy rice accessions, but is not a primary factor in the recent outbreak of weedy rice in China. PMID:26012494

Cytoplasmic-genetic male sterility gene provides direct evidence for some hybrid rice recently evolving into weedy rice.

Science.gov (United States)

Zhang, Jingxu; Lu, Zuomei; Dai, Weimin; Song, Xiaoling; Peng, Yufa; Valverde, Bernal E; Qiang, Sheng

2015-05-27

Weedy rice infests paddy fields worldwide at an alarmingly increasing rate. There is substantial evidence indicating that many weedy rice forms originated from or are closely related to cultivated rice. There is suspicion that the outbreak of weedy rice in China may be related to widely grown hybrid rice due to its heterosis and the diversity of its progeny, but this notion remains unsupported by direct evidence. We screened weedy rice accessions by both genetic and molecular marker tests for the cytoplasmic male sterility (CMS) genes (Wild abortive, WA, and Boro type, BT) most widely used in the production of indica and japonica three-line hybrid rice as a diagnostic trait of direct parenthood. Sixteen weedy rice accessions of the 358 tested (4.5%) contained the CMS-WA gene; none contained the CMS-BT gene. These 16 accessions represent weedy rices recently evolved from maternal hybrid rice derivatives, given the primarily maternal inheritance of this trait. Our results provide key direct evidence that hybrid rice can be involved in the evolution of some weedy rice accessions, but is not a primary factor in the recent outbreak of weedy rice in China.

Asian wild rice is a hybrid swarm with extensive gene flow and feralization from domesticated rice

OpenAIRE

Wang, Hongru; Garrett Vieira, Filipe Jorge; Crawford, Jacob E.; Chu, Chengcai; Nielsen, Rasmus

2017-01-01

The domestication history of rice remains controversial, with multiple studies reaching different conclusions regarding its origin(s). These studies have generally assumed that populations of living wild rice, O. rufipogon, are descendants of the ancestral population that gave rise to domesticated rice, but relatively little attention has been paid to the origins and history of wild rice itself. Here, we investigate the genetic ancestry of wild rice by analyzing a diverse panel of rice genome...

Yang-Mills gravity in biconformal space

International Nuclear Information System (INIS)

Anderson, Lara B; Wheeler, James T

2007-01-01

We write a gravity theory with Yang-Mills-type action using the biconformal gauging of the conformal group. We show that the resulting biconformal Yang-Mills gravity theories describe 4-dim, scale-invariant general relativity in the case of slowly changing fields. In addition, we systematically extend arbitrary 4-dim Yang-Mills theories to biconformal space, providing a new arena for studying flat-space Yang-Mills theories. By applying the biconformal extension to a 4-dim pure Yang-Mills theory with conformal symmetry, we establish a 1-1, onto mapping between a set of gravitational gauge theories and 4-dim, flat-space gauge theories

Coverage of Adequately Iodized Salt Is Suboptimal and Rice Fortification Using Public Distribution Channels Could Reach Low-Income Households: Findings from a Cross-Sectional Survey of Anganwadi Center Catchment Areas in Telangana, India.

Directory of Open Access Journals (Sweden)

James P Wirth

Full Text Available Food fortification is a cost-effective approach to prevent and control of micronutrient deficiencies in India. A cross-sectional survey of children 0-35 months of age residing in the catchment areas of anganwadi centers in the state of Telangana was conducted to assess the coverage of adequately iodized salt and the potential for rice fortification. Salt samples were collected and tested for iodine concentration using iodometric titration. Information on demographics, household rice consumption, and Telangana's rice sector was collected and interpreted. In households of selected children, 79% of salt samples were found to be adequately iodized. Salt brand and district were significant predictors of inadequately iodized salt. Daily rice consumption among children and women averaged 122 grams and 321 grams per day, respectively. Approximately 28% of households reported consuming rice produced themselves or purchased from a local farmer, 65% purchased rice from a market or shop, 6% got rice from a public distribution system site, and 2% obtained it from a rice mill. In the catchment areas of Telangana's anganwadi centers, there is significant variation in the coverage of adequately iodized salt by district. Future surveys in Telangana should measure the coverage of salt iodization in the general population using quantitative methods. Nonetheless, increasing the adequacy of iodization of smaller salt manufacturers would help achieve universal salt iodization in Telangana. Despite high consumption of rice, our findings suggest that large-scale market-based rice fortification is not feasible in Telangana due to a large proportion of households producing their own rice and highly fragmented rice distribution. Distributing fortified rice via Telangana's public distribution system may be a viable approach to target low-income households, but would only reach a small proportion of the population in Telangana.

Coverage of Adequately Iodized Salt Is Suboptimal and Rice Fortification Using Public Distribution Channels Could Reach Low-Income Households: Findings from a Cross-Sectional Survey of Anganwadi Center Catchment Areas in Telangana, India.

Science.gov (United States)

Wirth, James P; Leyvraz, Magali; Sodani, Prahlad R; Aaron, Grant J; Sharma, Narottam D; Woodruff, Bradley A

2016-01-01

Food fortification is a cost-effective approach to prevent and control of micronutrient deficiencies in India. A cross-sectional survey of children 0-35 months of age residing in the catchment areas of anganwadi centers in the state of Telangana was conducted to assess the coverage of adequately iodized salt and the potential for rice fortification. Salt samples were collected and tested for iodine concentration using iodometric titration. Information on demographics, household rice consumption, and Telangana's rice sector was collected and interpreted. In households of selected children, 79% of salt samples were found to be adequately iodized. Salt brand and district were significant predictors of inadequately iodized salt. Daily rice consumption among children and women averaged 122 grams and 321 grams per day, respectively. Approximately 28% of households reported consuming rice produced themselves or purchased from a local farmer, 65% purchased rice from a market or shop, 6% got rice from a public distribution system site, and 2% obtained it from a rice mill. In the catchment areas of Telangana's anganwadi centers, there is significant variation in the coverage of adequately iodized salt by district. Future surveys in Telangana should measure the coverage of salt iodization in the general population using quantitative methods. Nonetheless, increasing the adequacy of iodization of smaller salt manufacturers would help achieve universal salt iodization in Telangana. Despite high consumption of rice, our findings suggest that large-scale market-based rice fortification is not feasible in Telangana due to a large proportion of households producing their own rice and highly fragmented rice distribution. Distributing fortified rice via Telangana's public distribution system may be a viable approach to target low-income households, but would only reach a small proportion of the population in Telangana.

Transcriptional changes of rice in response to rice black-streaked dwarf virus.

Science.gov (United States)

Ahmed, Mohamed M S; Ji, Wen; Wang, Muyue; Bian, Shiquan; Xu, Meng; Wang, Weiyun; Zhang, Jiangxiang; Xu, Zhihao; Yu, Meimei; Liu, Qiaoquan; Zhang, Changquan; Zhang, Honggen; Tang, Shuzhu; Gu, Minghong; Yu, Hengxiu

2017-09-10

Rice black-streaked dwarf virus (RBSDV), a member of the genus Fijivirus in the family Reoviridae, causes significant economic losses in rice production in China and many other Asian countries. Although a great deal of effort has been made to elucidate the interactions among the virus, insect vectors, host and environmental conditions, few RBSDV proteins involved in pathogenesis have been identified, and the biological basis of disease development in rice remains largely unknown. Transcriptomic information associated with the disease development in rice would be helpful to unravel the biological mechanism. To determine how the rice transcriptome changes in response to RBSDV infection, we carried out RNA-Seq to perform a genome-wide gene expression analysis of a susceptible rice cultivar KTWYJ3. The transcriptomes of RBSDV-infected samples were compared to those of RBSDV-free (healthy) at two time points (time points are represented by group I and II). The results derived from the differential expression analysis in RBSDV-infected libraries vs. healthy ones in group I revealed that 102 out of a total of 281 significant differentially expressed genes (DEGs) were up-regulated and 179 DEGs were down-regulated. Of the 2592 identified DEGs in group II, 1588 DEGs were up-regulated and 1004 DEGs were down-regulated. A total of 66 DEGs were commonly identified in both groups. Of these 66 DEGs, expression patterns for 36 DEGs were similar in both groups. Our analysis demonstrated that some genes related to disease defense and stress resistance were up-regulated while genes associated with chloroplast were down-regulated in response to RBSDV infection. In addition, some genes associated with plant-height were differentially expressed. This result indicates those genes might be involved in dwarf symptoms caused by RBSDV. Taken together, our results provide a genome-wide transcriptome analysis for rice plants in response to RBSDV infection which may contribute to the

Integrated rice-duck farming mitigates the global warming potential in rice season.

Science.gov (United States)

Xu, Guochun; Liu, Xin; Wang, Qiangsheng; Yu, Xichen; Hang, Yuhao

2017-01-01

Integrated rice-duck farming (IRDF), as a mode of ecological agriculture, is an important way to realize sustainable development of agriculture. A 2-year split-plot field experiment was performed to evaluate the effects of IRDF on methane (CH 4 ) and nitrous oxide (N 2 O) emissions and its ecological mechanism in rice season. This experiment was conducted with two rice farming systems (FS) of IRDF and conventional farming (CF) under four paddy-upland rotation systems (PUR): rice-fallow (RF), annual straw incorporating in rice-wheat rotation system (RWS), annual straw-based biogas residues incorporating in rice-wheat rotation system (RWB), and rice-green manure (RGM). During the rice growing seasons, IRDF decreased the CH 4 emission by 8.80-16.68%, while increased the N 2 O emission by 4.23-15.20%, when compared to CF. Given that CH 4 emission contributed to 85.83-96.22% of global warming potential (GWP), the strong reduction in CH 4 emission led to a significantly lower GWP of IRDF as compared to CF. The reason for this trend was because IRDF has significant effect on dissolved oxygen (DO) and soil redox potential (Eh), which were two pivotal factors for CH 4 and N 2 O emissions in this study. The IRDF not only mitigates the GWP, but also increases the rice yield by 0.76-2.43% compared to CF. Moreover, compared to RWS system, RF, RWB and RGM systems significantly reduced CH 4 emission by 50.17%, 44.89% and 39.51%, respectively, while increased N 2 O emission by 10.58%, 14.60% and 23.90%, respectively. And RWS system had the highest GWP. These findings suggest that mitigating GWP and improving rice yield could be simultaneously achieved by the IRDF, and employing suitable PUR would benefit for relieving greenhouse effect. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessing green-processing technologies for wet milling freshly hulled and germinated brown rice, leading to naturally fortified plant-based beverages

Science.gov (United States)

Rice milk beverages can well balanced nutrition. With healthier nutrition in consumer’s minds, national. Worldwide consumption/production of plant-based milk beverages are increasing. Much past research and invention was based on enzymatic conversion processes for starch that were uncomplicated be...

Engineered Dwarf Male-Sterile Rice: A Promising Genetic Tool for Facilitating Recurrent Selection in Rice.

Science.gov (United States)

Ansari, Afsana; Wang, Chunlian; Wang, Jian; Wang, Fujun; Liu, Piqing; Gao, Ying; Tang, Yongchao; Zhao, Kaijun

2017-01-01

Rice is a crop feeding half of the world's population. With the continuous raise of yield potential via genetic improvement, rice breeding has entered an era where multiple genes conferring complex traits must be efficiently manipulated to increase rice yield further. Recurrent selection is a sound strategy for manipulating multiple genes and it has been successfully performed in allogamous crops. However, the difficulties in emasculation and hand pollination had obstructed efficient use of recurrent selection in autogamous rice. Here, we report development of the dwarf male-sterile rice that can facilitate recurrent selection in rice breeding. We adopted RNAi technology to synergistically regulate rice plant height and male fertility to create the dwarf male-sterile rice. The RNAi construct pTCK-EGGE, targeting the OsGA20ox2 and OsEAT1 genes, was constructed and used to transform rice via Agrobacterium -mediated transformation. The transgenic T0 plants showing largely reduced plant height and complete male-sterile phenotypes were designated as the dwarf male-sterile plants. Progenies of the dwarf male-sterile plants were obtained by pollinating them with pollens from the wild-type. In the T1 and T2 populations, half of the plants were still dwarf male-sterile; the other half displayed normal plant height and male fertility which were designated as tall and male-fertile plants. The tall and male-fertile plants are transgene-free and can be self-pollinated to generate new varieties. Since emasculation and hand pollination for dwarf male-sterile rice plants is no longer needed, the dwarf male-sterile rice can be used to perform recurrent selection in rice. A dwarf male-sterile rice-based recurrent selection model has been proposed.

Influence of milling process on efavirenz solubility

Directory of Open Access Journals (Sweden)

Erizal Zaini

2017-01-01

Full Text Available Introduction: The aim of this study was to investigate the influence of the milling process on the solubility of efavirenz. Materials and Methods: Milling process was done using Nanomilling for 30, 60, and 180 min. Intact and milled efavirenz were characterized by powder X-ray diffraction, scanning electron microscopy (SEM, spectroscopy infrared (IR, differential scanning calorimetry (DSC, and solubility test. Results: The X-ray diffractogram showed a decline on peak intensity of milled efavirenz compared to intact efavirenz. The SEM graph depicted the change from crystalline to amorphous habit after milling process. The IR spectrum showed there was no difference between intact and milled efavirenz. Thermal analysis which performed by DSC showed a reduction on endothermic peak after milling process which related to decreasing of crystallinity. Solubility test of intact and milled efavirenz was conducted in distilled water free CO2with 0.25% sodium lauryl sulfate media and measured using high-performance liquid chromatography method with acetonitrile: distilled water (80:20 as mobile phases. The solubility was significantly increased (P < 0.05 after milling processes, which the intact efavirenz was 27.12 ± 2.05, while the milled efavirenz for 30, 60, and 180 min were 75.53 ± 1.59, 82.34 ± 1.23, and 104.75 ± 0.96 μg/mL, respectively. Conclusions: Based on the results, the solubility of efavirenz improved after milling process.

Tool Wear Analysis on Five-Axis Flank Milling for Curved Shape Part – Full Flute and Ground Shank End Mill

Directory of Open Access Journals (Sweden)

Syahrul Azwan Sundi

2017-01-01

Full Text Available This paper is a study on full flute (extra-long tool and ground shank end mill wear analysis by utilizing five-axis CNC to implement flank milling strategy on curved shape part. Five-axis machining eases the user to implement variations of strategy such as flank milling. Flank milling is different from point milling. Point milling cuts materials by using the tip of the tool whereas the flank milling uses the cutting tool body to cut material. The type of cutting tool used was end mill 10 mm diameter with High Speed Steel (HSS material. One factor at a time was utilized to analyze the overall data. Feed rate and spindle speed were the two main factors that been set up equally for both full flute and ground shank end mill. At the end of this research, the qualitative analysis based on tool wear between full flute and ground shank end mill is observed. Generally, both types of cutting tools showed almost the same failure indication such as broken edge or chipped off edge, formation of pinned hole on the surface and serration formation or built-up edge (BUE on the primary flute. However, the results obtained from the enlarged images which were captured by Optical Microscope indicated that, the ground shank end mill is better than the full flute end mill.

Particle deformation during stirred media milling

Science.gov (United States)

Hamey, Rhye Garrett

Production of high aspect ratio metal flakes is an important part of the paint and coating industry. The United States Army also uses high aspect ratio metal flakes of a specific dimension in obscurant clouds to attenuate infrared radiation. The most common method for their production is by milling a metal powder. Ductile metal particles are initially flattened in the process increasing the aspect ratio. As the process continues, coldwelding of metal flakes can take place increasing the particle size and decreasing the aspect ratio. Extended milling times may also result in fracture leading to a further decrease in the particle size and aspect ratio. Both the coldwelding of the particles and the breakage of the particles are ultimately detrimental to the materials performance. This study utilized characterization techniques, such as, light scattering and image analysis to determine the change in particle size as a function of milling time and parameters. This study proved that a fundamental relationship between the milling parameters and particle deformation could be established by using Hertz's theory to calculate the stress acting on the aluminum particles. The study also demonstrated a method by which milling efficiency could be calculated, based on the amount of energy required to cause particle deformation. The study found that the particle deformation process could be an energy efficient process at short milling times with milling efficiency as high as 80%. Finally, statistical design of experiment was used to obtain a model that related particle deformation to milling parameters, such as, rotation rate and milling media size.

Learning Activity Packets for Milling Machines. Unit I--Introduction to Milling Machines.

Science.gov (United States)

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to identify parts and attachments of vertical and horizontal milling machines, identify work-holding devices, state safety rules, and…

Comparisons of protein, lipid, phenolics, γ-oryzanol, vitamin E, and mineral contents in bran layer of sodium azide-induced red rice mutants.

Science.gov (United States)

Jeng, Toong Long; Ho, Pei Tzu; Shih, Yi Ju; Lai, Chia Chi; Wu, Min Tze; Sung, Jih Min

2011-06-01

The bran part of red rice grain is concentrated with many phytochemicals, including proanthocyanidins, oryzanol and vitamin E, that exert beneficial effects on human health, but it contains low levels of essential minerals such as Fe and Zn. In the present study, the protein, lipid, phytochemicals and mineral contents in bran samples were compared among red rice SA-586 and its NaN₃-induced mutants. The plant heights of NaN₃-induced mutants were decreased. The contents of protein, lipid, total phenolics, total flavonoids, total anthocyanins, total proanthocyanidins, total γ-oryzanol, total tocopherols and total tocotrienols also varied among the tested mutants. The brans of mutants M-18, M-56 and M-50 contained more proanthocyanidins, γ-oryzanol, vitamin E than that of SA-586, respectively. M-54 accumulated more Fe content (588.7 mg kg⁻¹ bran dry weight) than SA-586 (100.1 mg kg⁻¹ bran dry weight). The brans of M-18, M-50 and M-56 are good sources of proanthocyanidins, vitamin E and γ-oryzanol, respectively, while the bran of M-54 is rich in Fe. Thus these mutants could be used to produce high-value phytochemicals or Fe byproducts from bran during rice grain milling or as genetic resources for rice improvement programs. Copyright © 2011 Society of Chemical Industry.

Rice as commodity and anti-commodity

NARCIS (Netherlands)

Richards, P.

2016-01-01

On the Upper West Africa coast rice belongs to two species — African rice (Oryza glaberrima Steud.) and Asian rice (Oryza sativa L.). African rice was domesticated in the region, perhaps three millennia ago, from a presumed wild ancestor, O. barthii. Asian rice was introduced via trans-Saharan

Nanocrystalline TiAl powders synthesized by high-energy ball milling: effects of milling parameters on yield and contamination

International Nuclear Information System (INIS)

Bhattacharya, Prajina; Bellon, Pascal; Averback, Robert S.; Hales, Stephen J.

2004-01-01

High-energy ball milling was employed to produce nanocrystalline Ti-Al powders. As sticking of the powders can be sufficiently severe to result in a near zero yield, emphasis was placed on varying milling conditions so as to increase the yield, while avoiding contamination of the powders. The effects of milling parameters such as milling tools, initial state of the powders and addition of process control agents (PCA's) were investigated. Cyclohexane, stearic acid and titanium hydride were used as PCA's. Milling was conducted either in a Cr-steel vial with C-steel balls, or in a tungsten carbide (WC) vial with WC balls, using either elemental or pre-alloyed powders. Powder samples were characterized using X-ray diffraction, scanning and transmission electron microscopy. In the absence of PCA's mechanical alloying in a WC vial and attrition milling in a Cr-steel vial were shown to lead to satisfactory yields, about 65-80%, without inducing any significant contamination of the powders. The results suggest that sticking of the powders on to the milling tools is correlated with the phase evolution occurring in these powders during milling

RICD: A rice indica cDNA database resource for rice functional genomics

Directory of Open Access Journals (Sweden)

Zhang Qifa

2008-11-01

Full Text Available Abstract Background The Oryza sativa L. indica subspecies is the most widely cultivated rice. During the last few years, we have collected over 20,000 putative full-length cDNAs and over 40,000 ESTs isolated from various cDNA libraries of two indica varieties Guangluai 4 and Minghui 63. A database of the rice indica cDNAs was therefore built to provide a comprehensive web data source for searching and retrieving the indica cDNA clones. Results Rice Indica cDNA Database (RICD is an online MySQL-PHP driven database with a user-friendly web interface. It allows investigators to query the cDNA clones by keyword, genome position, nucleotide or protein sequence, and putative function. It also provides a series of information, including sequences, protein domain annotations, similarity search results, SNPs and InDels information, and hyperlinks to gene annotation in both The Rice Annotation Project Database (RAP-DB and The TIGR Rice Genome Annotation Resource, expression atlas in RiceGE and variation report in Gramene of each cDNA. Conclusion The online rice indica cDNA database provides cDNA resource with comprehensive information to researchers for functional analysis of indica subspecies and for comparative genomics. The RICD database is available through our website http://www.ncgr.ac.cn/ricd.

Physicochemical and Antioxidant Properties of Rice Bran Oils Produced from Colored Rice Using Different Extraction Methods.

Science.gov (United States)

Mingyai, Sukanya; Kettawan, Aikkarach; Srikaeo, Khongsak; Singanusong, Riantong

2017-06-01

This study investigated the physicochemical and antioxidant properties of rice bran oil (RBO) produced from the bran of three rice varities; Khao Dawk Mali 105 (white rice), Red Jasmine rice (red rice) and Hom-nin rice (black rice) using three extraction methods including cold-press extraction (CPE), solvent extraction (SE) and supercritical CO 2 extraction (SC-CO 2 ). Yields, color, acid value (AV), free fatty acid (FFA), peroxide value (PV), iodine value (IV), total phenolic compound (TPC), γ-oryzanol, α-tocopherol and fatty acid profile were analyzed. It was found that the yields obtained from SE, SC-CO 2 and CPE extractions were 17.35-20.19%, 14.76-18.16% and 3.22-6.22%, respectively. The RBO from the bran of red and black rice samples exhibited high antioxidant activities. They also contained higher amount of γ-oryzanol and α-tocopherol than those of white rice sample. In terms of extraction methods, SC-CO 2 provided better qualities of RBO as evidenced by their physicochemical and antioxidant properties. This study found that RBO produced from the bran of black rice samples using SC-CO 2 extraction method showed the best physicochemical and antioxidant properties.

Dynamic viscoelasticity of protease-treated rice batters for gluten-free rice bread making.

Science.gov (United States)

Honda, Yuji; Inoue, Nanami; Sugimoto, Reina; Matsumoto, Kenji; Koda, Tomonori; Nishioka, Akihiro

2018-03-01

Papain (cysteine protease), subtilisin (Protin SD-AY10, serine protease), and bacillolysin (Protin SD-NY10, metallo protease) increased the specific volume of gluten-free rice breads by 19-63% compared to untreated bread. In contrast, Newlase F (aspartyl protease) did not expand the volume of the rice bread. In a rheological analysis, the viscoelastic properties of the gluten-free rice batters also depended on the protease categories. Principal component analysis (PCA) analysis suggested that the storage and loss moduli (G' and G″, respectively) at 35 °C, and the maximum values of G' and G″, were important factors in the volume expansion. Judging from the PCA of the viscoelastic parameters of the rice batters, papain and Protin SD-AY10 improved the viscoelasticity for gluten-free rice bread making, and Protin SD-NY effectively expanded the gluten-free rice bread. The rheological properties differed between Protin SD-NY and the other protease treatments.

The progress in the researches for uranium mill tailings cleaning treatment and no-waste uranium ore milling processes

International Nuclear Information System (INIS)

Wang Jintang

1990-01-01

The production of uranium mill tailings and their risk assessment are described. The moethods of uranium mill tailings disposal and management are criticized and the necessity of the researches for uranium mill tailings cleaning treatment and no-wasle uranium ore milling process are demonstrated. The progress for these researches in China and other countries with uranium production is reviewed, and the corresponding conclusions are reported

Migrant Workers in Agriculture: A View from Thailand.

Science.gov (United States)

Thetkathuek, Anamai; Daniell, William

2016-01-01

There has been a dramatic increase in the global movement of workers during the last few decades. As Thailand has developed rapidly over the past 20 years, it has attracted laborers (both authorized and unauthorized) from the neighboring countries of Myanmar, People's Democratic Republic of Lao (Lao PDR), and Cambodia. Given that agriculture has been Thailand's most important industry, its continued growth has been dependent on migrant workers. Both crop agriculture and animal-production agriculture have employed migrant labor. Migrants have been hired to plant, weed, fertilize, spray pesticides, and harvest crops such as rice, corn, sugar cane, and cassava. They have worked at rubber and coffee plantations, as well as in the production of ornamental crops. Also, migrants have labored on pig, beef, and duck farms. There have been numerous documented health problems among migrant workers, including acute diarrhea, malaria, and fever of unknown causes. Occupational illness and injury have been a significant concern, and there has been limited health and safety training. This article reviewed the demographic changes in Thailand, studied the agricultural crops and animal production that are dependent on migrant labor, discussed the health status and safety challenges pertaining to migrant workers in agriculture, and described several recommendations. Among the recommendations, the conclusions of this study have suggested that addressing the cost for health care and solutions to health care access for migrant labor are needed.

75 FR 49524 - Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding...

Science.gov (United States)

2010-08-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated July 22, 2010, petitioners requested administrative [[Page 49525

Characterization of Volatile Flavor Compounds in Chinese Rice Wine Fermented from Enzymatic Extruded Rice.

Science.gov (United States)

Xu, Enbo; Long, Jie; Wu, Zhengzong; Li, Hongyan; Wang, Fang; Xu, Xueming; Jin, Zhengyu; Jiao, Aiquan

2015-07-01

Enzymatic extrusion, instead of traditional steam cooking, to treat rice is an efficient and alternative pretreatment for Chinese rice wine fermentation. In order to determine the formation of volatiles in enzymatic extrusion-processed rice wine (EE), and to confirm its characteristic flavor compounds, headspace solid-phase micro-extraction followed by GC-MS was used. A total of 66 volatile compounds were identified in EE. During fermentation, most volatiles generated from enzymatic extruded rice had the similar trends with those from steam-cooked rice, but the differences in the concentration of volatiles indicated a changed balance of flavors release caused by enzymatic extrusion. Besides, the concentrations and sorts of volatiles in EEs fermented from different rice particle sizes, were not dramatically different. By principal component analysis, EE could be distinctly separated from other traditional Chinese rice wines according to its characteristic volatiles, namely, 2-heptanol, 1-octen-3-ol, ethyl 4-hydroxybenzoate, methylpentyl 2-propenoate, γ-hexalactone, and 4-vinylguaiacol. Enzymatic extrusion liquefaction has been a popular thermal treatment for cereals, and gradually being applied in fermentation and liquor-making industry all over the world. The characterization of volatile flavor compounds in Chinese rice wine processed by enzymatic extrusion liquefaction pretreatment, might be made use not only for a better understanding of this new-type rice wine, but for the further utilization of enzymatic extrusion in other wine or alcohol production as well. © 2015 Institute of Food Technologists®

PREDICTION OF DROUGHT IMPACT ON RICE PADDIES IN WEST JAVA USING ANALOGUE DOWNSCALING METHOD

Directory of Open Access Journals (Sweden)

Elza Surmaini

2015-09-01

Full Text Available Indonesia consistently experiences dry climatic conditions and droughts during El Niño, with significant consequences for rice production. To mitigate the impacts of such droughts, robust, simple and timely rainfall forecast is critically important for predicting drought prior to planting time over rice growing areas in Indonesia. The main objective of this study was to predict drought in rice growing areas using ensemble seasonal prediction. The skill of National Oceanic and Atmospheric Administration’s (NOAA’s seasonal prediction model Climate Forecast System version 2 (CFSv2 for predicting rice drought in West Java was investigated in a series of hindcast experiments in 1989-2010. The Constructed Analogue (CA method was employed to produce downscaled local rainfall prediction with stream function (y and velocity potential (c at 850 hPa as predictors and observed rainfall as predictant. We used forty two rain gauges in northern part of West Java in Indramayu, Cirebon, Sumedang and Majalengka Districts. To be able to quantify the uncertainties, a multi-window scheme for predictors was applied to obtain ensemble rainfall prediction. Drought events in dry season planting were predicted by rainfall thresholds. The skill of downscaled rainfall prediction was assessed using Relative Operating Characteristics (ROC method. Results of the study showed that the skills of the probabilistic seasonal prediction for early detection of rice area drought were found to range from 62% to 82% with an improved lead time of 2-4 months. The lead time of 2-4 months provided sufficient time for practical policy makers, extension workers and farmers to cope with drought by preparing suitable farming practices and equipments.

Black holes with Yang-Mills hair

International Nuclear Information System (INIS)

Kleihaus, B.; Kunz, J.; Sood, A.; Wirschins, M.

1998-01-01

In Einstein-Maxwell theory black holes are uniquely determined by their mass, their charge and their angular momentum. This is no longer true in Einstein-Yang-Mills theory. We discuss sequences of neutral and charged SU(N) Einstein-Yang-Mills black holes, which are static spherically symmetric and asymptotically flat, and which carry Yang-Mills hair. Furthermore, in Einstein-Maxwell theory static black holes are spherically symmetric. We demonstrate that, in contrast, SU(2) Einstein-Yang-Mills theory possesses a sequence of black holes, which are static and only axially symmetric

Pulp mill as an energy producer

International Nuclear Information System (INIS)

Kaulamo, O.

1998-01-01

The recovery boilers of pulp mills are today the most significant producers of wood energy. The power-to-heat ratio of the power plant process, i.e., power yield, is poor in existing applications. In the study, an alternative of improving the power yield of conventional pulp mills significantly was studied by applying solutions used in power plants to a pulp mill. Extensive conversion of wood energy into electricity is possible only in the recovery boiler of the pulp mill and in a large combustion boiler of bark, wood waste and wood chips integrated to this boiler. Hence, the harvest and transports of wood raw materials, i.e. pulp wood and energy wood, are integrated, and the fraction going to cook and the energy wood fraction are separated at the pulp mill. The method guarantees competitive supply of energy wood. As a result a SELLUPOWER mill was designed, where the recovery boiler combusting black liquor and the large power plant boiler combusting energy wood are integrated to one unit and constructed to a power plant process with a high power-to-heat ratio. Necessary technical solutions, project costs and economical feasibility compared to a conventional pulp mill were determined, and the effect of different production-economical parameters was also studied. (orig.)

Rice Cluster I, an Important Group of Archaea Producing Methane in Rice Fields

Science.gov (United States)

Conrad, R.

2006-12-01

Rice fields are an important source for the greenhouse gas methane. Methane is a major degradation product of organic matter in the anoxic soil, is partially oxidized in the rhizosphere and is emitted into the atmosphere through the aerenchyma system of the plants. Anaerobic degradation of organic matter by fermenting bacteria eventually results in the production of acetate and hydrogen, the two major substrates for microbial methanogenesis. The community of methanogenic archaea consists of several major orders or families including hydrogen-utilizing Rice Cluster-I (RC-I). Environmental conditions affect the methanogenic degradation process and the community structure of the methanogenic archaea in soil and rhizosphere. For example, populations of acetoclastic Methanosaetaceae and Methanosarcinaceae are enhanced by low and high acetate concentrations, respectively. Stable isotope probing of 16S rRNA showed that RC-I methanogens are mainly active on rice roots and at low H2 concentrations. Growth and population size is largely consistent with energetic conditions. RC-I methanogens on roots seem to be responsible for methane production from plant photosynthates that account for a major part of the emitted methane. Populations of RC-I methanogens in rice field soil are also enhanced at elevated temperatures (40-50°C). Moderately thermophilic members of RC-I methanogens or other methanogenic families were found to be ubiquitously present in soils from rice fields and river marshes. The genome of a RC-I methanogen was completely sequenced out of an enrichment culture using a metagenome approach. Genes found are consistent with life in the rhizosphere and in temporarily drained, oxic soil. We found that the methanogenic community structure on the rice roots is mainly determined by the respective community structure of the soil, but is in addition affected by the rice cultivar. Rice microcosms in which soil and rice roots are mainly colonized by RC-I methanogens produce

Colorado's prospectus on uranium milling

International Nuclear Information System (INIS)

Hazle, A.J.; Franz, G.A.; Gamewell, R.

1982-01-01

The first part of this paper will discuss Colorado's control of uranium mill tailings under Titles I and II of the Uranium Mill Tailings Radiation Control Act of 1978. Colorado has a legacy of nine inactive mill sites requiring reclamation under Title I, and two presently active plus a number of new mill proposals which must be regulated in accordance with Title II. Past failures in siting and control on the part of federal jurisdictions have left the state with a heavy legacy requiring extensive effort to address impacts to the state's environment and population. The second part of this paper will discuss the remedial action programme authorized under Public Law 92-314 for Mesa Country, where lack of federal control led to the dispersal of several hundred thousand tons of uranium mill tailings on thousands of properties, including hundreds of homes, schools and other structures. Successful completion of the State efforts under both programmes will depend on a high level of funding and on the maintenance of adequate regulatory standards. (author)

Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines.

Science.gov (United States)

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

The dental milling machine is an important device in the dental CAD/CAM chain. Nowadays, dental numerical controlled (NC) milling machines are available for dental surgeries (chairside solution). This article provides a mechanical engineering approach to NC milling machines to help dentists understand the involvement of technology in digital dentistry practice. First, some technical concepts and definitions associated with NC milling machines are described from a mechanical engineering viewpoint. The technical and economic criteria of four chairside dental NC milling machines that are available on the market are then described. The technical criteria are focused on the capacities of the embedded technologies of these milling machines to mill both prosthetic materials and types of shape restorations. The economic criteria are focused on investment costs and interoperability with third-party software. The clinical relevance of the technology is assessed in terms of the accuracy and integrity of the restoration.

Logistic Regression Analysis on Factors Affecting Adoption of Rice-Fish Farming in North Iran

Directory of Open Access Journals (Sweden)

Seyyed Ali NOORHOSSEINI-NIYAKI

2012-06-01

Full Text Available We evaluated the factors influencing the adoption of rice-fish farming in the Tavalesh region near the Caspian Sea in northern Iran. We conducted a survey with open-ended questions. Data were collected from 184 respondents (61 adopters and 123 non-adopters randomly sampled from selected villages and analyzed using logistic regression and multi-response analysis. Family size, number of contacts with an extension agent, participation in extension-education activities, membership in social institutions and the presence of farm workers were the most important socio-economic factors for the adoption of rice-fish farming system. In addition, economic problems were the most common issue reported by adopters. Other issues such as lack of access to appropriate fish food, losses of fish, lack of access to high quality fish fingerlings and dehydration and poor water quality were also important to a number of farmers.

Process development and economic evaluation of recombinant human lactoferrin expressed in rice grain.

Science.gov (United States)

Nandi, Somen; Yalda, Dorice; Lu, Stephen; Nikolov, Zivko; Misaki, Ryo; Fujiyama, Kazuhito; Huang, Ning

2005-06-01

In this paper, we show that recombinant human lactoferrin (rhLF) has been stably expressed at 0.5% brown rice flour weight for nine generations. Process development indicates that rhLF can be efficiently extracted from rice flour in 20 mM phosphate buffer (pH 7.0) containing up to 0.5 M NaCl and at a ratio of 1 kg flour to 10 L buffer. After solid/liquid separation, the extract can then be loaded directly onto an ion-exchange column and rhLF can be eluted using 0.8 M NaCl. The resulting rhLF is about 95% pure. A range of biochemical and biophysical analyses were carried out and results indicated that the purified rhLF was identical to its native human counterpart other than its glycosylation. Economic analysis shows that at 600 kg/year scale, the cash cost to produce 1 g of rhLF of pharmaceutical grade is US$ 5.90. Analysis also indicates that the expression level has profound impact on costs related to planting, milling, extraction and purification, thus high level expression of recombinant protein in plants is one of the key parameters for the success of plant made pharmaceuticals.

Effect of waxy rice flour and cassava starch on freeze-thaw stability of rice starch gels.

Science.gov (United States)

Charoenrein, Sanguansri; Preechathammawong, Nutsuda

2012-10-01

Repeatedly frozen and thawed rice starch gel affects quality. This study investigated how incorporating waxy rice flour (WF) and cassava starch (CS) in rice starch gel affects factors used to measure quality. When rice starch gels containing 0-2% WF and CS were subjected to 5 freeze-thaw cycles, both WF and CS reduced the syneresis in first few cycles. However CS was more effective in reducing syneresis than WF. The different composite arrangement of rice starch with WF or CS caused different mechanisms associated with the rice starch gel retardation of retrogradation, reduced the spongy structure and lowered syneresis. Both swollen granules of rice starch and CS caused an increase in the hardness of the unfrozen and freeze-thawed starch gel while highly swollen WF granules caused softer gels. These results suggested that WF and CS were effective in preserving quality in frozen rice starch based products. Copyright © 2012 Elsevier Ltd. All rights reserved.

Evidence for Non-Transmission of Rice Yellow Mottle Virus (RYMV through Rice Seed

Directory of Open Access Journals (Sweden)

Sy, AA.

2004-01-01

Full Text Available An indexing of the organs (radicle and plumule and components (husk, endosperm and embryo of rice seeds using Enzyme Linked Immunosorbent Assay (ELISA was carried out to detect Rice yellow mottle virus (RYMV and establish the exact location of the virus in the rice seed. RYMV was detected only in the husk (seed coat but not in the endosperm, plumule, radicle, nor embryo. None of the seedlings raised from the seeds expressed RYMV symptoms. No virus particle was detected by the ELISA test in the leaves of the screenhouse-reared plants obtained from seeds of infected plants. The results indicate that RYMV is apparently not transmitted through rice seed probably because the virus is seed-borne in the husk (seed coat of mature rice seeds.

John Stuart Mill: utilitarismo e liberalismo = John Stuart Mill: utilitarianism and liberalism

Directory of Open Access Journals (Sweden)

Simões, Mauro Cardoso

2013-01-01

Full Text Available Meu objetivo, neste trabalho, é investigar a compatibilidade das teses utilitaristas e liberais de John Stuart Mill. Apresentarei, inicialmente, os principais críticos da filosofia moral e política de Mill, para os quais o discípulo de Bentham teria abandonado o utilitarismo ou, ainda, não esclarecido suficientemente seu princípio da liberdade, o que o tornaria um pensador assistemático e inconsistente. Minha tese é contrária a tais interpretações, uma vez que sustenta ser Mill consistente. Em seguida, defenderei uma interpretação do princípio da liberdade e da individualidade, procurando demonstrar que seu utilitarismo é compatível com seu liberalismo

Impact of bio-processing on rice

Directory of Open Access Journals (Sweden)

ANCA NICOLAU

2011-07-01

Full Text Available The usual way of preparing rice is boiling, thermal process that gives it a lower digestibility as compared to instantiation, extrusion or expandation. Having in view this fact, the possibility to biotechnologically improve the boiled rice digestibility was investigated in a laboratory study. In this respect, boiled rice wassolid state fermented using a strain of Saccharomycopsis fibuligera, an amylase producing yeast originating from ragi. Fermented rice was then analyzed from the point of view of its content in easily assimilable sugars, protein, amino-acids, phosphorus and vitamins from B group. Biochemical analyses revealed that the fermented rice has a ten times higher content of reducing sugars than boiled rice, due to starch hydrolysis, while chromatographic studies proved that the fermented rice contains glucose, maltose, maltotriose and maltotetrose that are easily assimilable carbohydrates.Fermented rice has a protein content that is two times higher than that of boiled rice because it contains the yeast biomass, and is enriched in vitamins from B group (B1, B2, and B6 that are synthesized by the yeast. Inorganic phosphorus present in rice doubles its concentration in fermented rice, which means thatphosphorus bioavailability is increased.The sensorial profile of boiled rice is also improved by fermentation.This study proves the possibility to have a processing method which is relatively cheap, practical and of which the resulting product has good nutritive qualities and does not pose safety problems due to pure culture utilization as starter.

Storage stability of flour-blasted brown rice

Science.gov (United States)

Brown rice was blasted with rice flour rather than sand in a sand blaster to make microscopic nicks and cuts so that water can easily penetrate into the brown rice endosperm and cook the rice in a shorter time. The flour-blasted American Basmati brown rice, long grain brown rice, and parboiled long...

Mapping paddy rice planting area in rice-wetland coexistent areas through analysis of Landsat 8 OLI and MODIS images.

Science.gov (United States)

Zhou, Yuting; Xiao, Xiangming; Qin, Yuanwei; Dong, Jinwei; Zhang, Geli; Kou, Weili; Jin, Cui; Wang, Jie; Li, Xiangping

2016-04-01

Accurate and up-to-date information on the spatial distribution of paddy rice fields is necessary for the studies of trace gas emissions, water source management, and food security. The phenology-based paddy rice mapping algorithm, which identifies the unique flooding stage of paddy rice, has been widely used. However, identification and mapping of paddy rice in rice-wetland coexistent areas is still a challenging task. In this study, we found that the flooding/transplanting periods of paddy rice and natural wetlands were different. The natural wetlands flood earlier and have a shorter duration than paddy rice in the Panjin Plain, a temperate region in China. We used this asynchronous flooding stage to extract the paddy rice planting area from the rice-wetland coexistent area. MODIS Land Surface Temperature (LST) data was used to derive the temperature-defined plant growing season. Landsat 8 OLI imagery was used to detect the flooding signal and then paddy rice was extracted using the difference in flooding stages between paddy rice and natural wetlands. The resultant paddy rice map was evaluated with in-situ ground-truth data and Google Earth images. The estimated overall accuracy and Kappa coefficient were 95% and 0.90, respectively. The spatial pattern of OLI-derived paddy rice map agrees well with the paddy rice layer from the National Land Cover Dataset from 2010 (NLCD-2010). The differences between Rice Landsat and Rice NLCD are in the range of ±20% for most 1-km grid cell. The results of this study demonstrate the potential of the phenology-based paddy rice mapping algorithm, via integrating MODIS and Landsat 8 OLI images, to map paddy rice fields in complex landscapes of paddy rice and natural wetland in the temperate region.

International tourist preference of Lodok Rice Field natural elements, the cultural rice field from Manggarai - Indonesia

Science.gov (United States)

March Syahadat, Ray; Trie Putra, Priambudi; Nuraini; Nailufar, Balqis; Fatmala Makhmud, Desy

2017-10-01

Lodok Rice Field or usually known as spiderweb rice field is a system of land division. It cultural rice field only found on Manggarai, Province of East Nusa Tenggara, Indonesia. The landscape of Lodok Rice Field was aesthetic and it has big potential for tourism development. The aim of this study was to know the perception of natural elements of Lodok Rice Field landscape that could influence international tourist to visited Lodok Rice Field. If we know the elements that could influenced the international tourist, we could used the landscape image for tourism media promotion. The methods of this study used scenic beauty estimation (SBE) by 85 respondents from 34 countries and Kruskal Wallis H test. The countries grouped by five continents (Asia, America, Europe, Africa, and Oceania). The result showed that the Asian respondents liked the elements of sky, mountain, and the rice field. Then, the other respondent from another continent liked the elements of sunshine, mountain, and the rice field. Although the Asian had different perception about landscape elements of rice field’s good view, it’s not differ significantly by Kruskal Wallis H test.

Defensive Responses of Rice Genotypes for Resistance Against Rice Leaffolder Cnaphalocrocis medinalis

Directory of Open Access Journals (Sweden)

M. PUNITHAVALLI

2013-09-01

Full Text Available The experiment was carried out to assess the reaction of different categories of rice genotypes viz., resistant, susceptible, hybrid, scented, popular and wild in response to the infestation by rice leaffolder (RLF, Cnaphalocrocis medinalis (Guenee and to explore the possible use of these genotypes in developing RLF-resistant rice varieties. The changes of various biochemical constituents such as leaf soluble protein, phenol, ortho-dihydroxy phenol, tannin and enzymes viz., peroxidase, phenyl alanine ammonia lyase (PAL were assessed spectrophotometrically in all the rice genotypes before and after RLF infestation. The protein profile was analyzed using sodium dodecyl sulphate-poly acrylamide gel electrophoresis (SDS-PAGE method. A significant constituent of biochemical content such as tannin, phenol and ortho-dihydroxy phenol has been increased along with enzyme activities of peroxidase and PAL in the infested resistant (Ptb 33, TKM6 and LFR831311 and wild rice genotypes (Oryza minuta and O. rhizomatis. A decrease in leaf protein content was evident invariably in all the infested rice genotypes. It is also evident that the contents of biochemicals such as phenol, ortho-dihydroxy phenol and tannin were negatively correlated with leaffolder damage. However, leaf protein content was positively correlated with the damage by rice leaffolder. SDS-PAGE analysis for total protein profiling of healthy and C. medinalis-infested genotypes revealed the enhanced expression of a high molecular weight (> 97 kDa protein in all the genotypes. Besides, there was also an increased induction of a 38 kDa protein in C. medinalis infested resistant genotypes, which was absent in uninfested plants. The present investigation proved that the elevated levels of biochemicals and enzymes may play a vital role in rice plants resistance to RLF.

Lead in rice: analysis of baseline lead levels in market and field collected rice grains.

Science.gov (United States)

Norton, Gareth J; Williams, Paul N; Adomako, Eureka E; Price, Adam H; Zhu, Yongguan; Zhao, Fang-Jie; McGrath, Steve; Deacon, Claire M; Villada, Antia; Sommella, Alessia; Lu, Ying; Ming, Lei; De Silva, P Mangala C S; Brammer, Hugh; Dasgupta, Tapash; Islam, M Rafiqul; Meharg, Andrew A

2014-07-01

In a large scale survey of rice grains from markets (13 countries) and fields (6 countries), a total of 1578 rice grain samples were analysed for lead. From the market collected samples, only 0.6% of the samples exceeded the Chinese and EU limit of 0.2 μg g(-1) lead in rice (when excluding samples collected from known contaminated/mine impacted regions). When evaluating the rice grain samples against the Food and Drug Administration's (FDA) provisional total tolerable intake (PTTI) values for children and pregnant women, it was found that only people consuming large quantities of rice were at risk of exceeding the PTTI from rice alone. Furthermore, 6 field experiments were conducted to evaluate the proportion of the variation in lead concentration in rice grains due to genetics. A total of 4 of the 6 field experiments had significant differences between genotypes, but when the genotypes common across all six field sites were assessed, only 4% of the variation was explained by genotype, with 9.5% and 11% of the variation explained by the environment and genotype by environment interaction respectively. Further work is needed to identify the sources of lead contamination in rice, with detailed information obtained on the locations and environments where the rice is sampled, so that specific risk assessments can be performed. Copyright © 2014 Elsevier B.V. All rights reserved.

Historical context and workers lifestyle in Mexico: San Rafael paper mill (1894-1940

Directory of Open Access Journals (Sweden)

José Gustavo Becerril Montero

2014-12-01

Full Text Available This article aims to describe the main features of the constructions made by the factories, mainly in the center and around the city of Mexico, since the late nineteenth century to the twentieth. The factories of Mexico in the nineteenth century were characterized by various constructive and technological elements that were giving them a unique profile within the productive landscape of the country. To observe the process of construction, mainly of spaces for the workers, the case of one of the most important factories attached role in Mexico, paper and addressed San Rafael. The San Rafael Company, established in the state of Mexico in the late nineteenth century, pursued since its founding supply the paper market. To achieve this goal, he implemented an ambitious production system, I need to build large apartments for the production of paper, and at the same time to concentrate spaces and ensure their workforce. So, in a few years he managed to develop an advanced, for the time, labor and industrial complex, giving their workers from living rooms to recreation and leisure spaces.

Optimization of FIB milling for rapid NEMS prototyping

DEFF Research Database (Denmark)

Malm, Bjarke; Petersen, Dirch Hjorth; Lei, Anders

2011-01-01

We demonstrate an optimized milling technique to focused ion beam (FIB) milling in template silicon membranes for fast prototyping of nanoelectromechanical systems (NEMS). Using a single-pass milling strategy the highly topology dependent sputtering rate is boosted and shorter milling time...... is achieved. Drift independence is obtained for small critical features using a radial scan strategy, and a back scan routine ensures minimal line width deviation removing redeposited material. Milling a design similar to a nano four-point probe with a pitch down to 400nm we display what optimized FIB milling...

Genomic dissection of small RNAs in wild rice (Oryza rufipogon): lessons for rice domestication.

Science.gov (United States)

Wang, Yu; Bai, Xuefei; Yan, Chenghai; Gui, Yiejie; Wei, Xinghua; Zhu, Qian-Hao; Guo, Longbiao; Fan, Longjiang

2012-11-01

The lack of a MIRNA set and genome sequence of wild rice (Oryza rufipogon) has prevented us from determining the role of MIRNA genes in rice domestication. In this study, a genome, three small RNA populations and a degradome of O. rufipogon were sequenced by Illumina platform and the expression levels of microRNAs (miRNAs) were investigated by miRNA chips. A de novo O. rufipogon genome was assembled using c. 55× coverage of raw sequencing data and a total of 387 MIRNAs were identified in the O. rufipogon genome based on c. 5.2 million unique small RNA reads from three different tissues of O. rufipogon. Of these, O. rufipogon MIRNAs, 259 were not found in the cultivated rice, suggesting a loss of these MIRNAs in the cultivated rice. We also found that 48 MIRNAs were novel in the cultivated rice, suggesting that they were potential targets of domestication selection. Some miRNAs showed significant expression differences between wild and cultivated rice, suggesting that expression of miRNA could also be a target of domestication, as demonstrated for the miR164 family. Our results illustrated that MIRNA genes, like protein-coding genes, might have been significantly shaped during rice domestication and could be one of the driving forces that contributed to rice domestication. © 2012 The Authors. New Phytologist © 2012 New Phytologist Trust.

Do rice water weevils and rice stem borers compete when sharing a host plant?

Science.gov (United States)

Shi, Sheng-Wei; He, Yan; Ji, Xiang-Hua; Jiang, Ming-Xing; Cheng, Jia-An

2008-07-01

The rice water weevil (RWW) Lissorhoptrus oryzophilus Kuschel (Coleoptera: Curculionidae) is an invasive insect pest of rice Oryza sativa L. in China. Little is known about the interactions of this weevil with indigenous herbivores. In the present study, adult feeding and population density of the weevil, injury level of striped stem borer Chilo suppressalis (Walker) (Lepidoptera: Pyralidae) and pink stem borer Sesamia inferens (Walker) (Lepidoptera: Noctuidae) to rice, as well as growth status of their host plants were surveyed in a rice field located in Southeastern Zhejiang, China, in 2004 with the objective to discover interspecific interactions on the rice. At tillering stage, both adult feeding of the weevil and injury of the stem borers tended to occur on larger tillers (bearing 5 leaves) compared with small tillers (bearing 2~4 leaves), but the insects showed no evident competition with each other. At booting stage, the stem borers caused more withering/dead hearts and the weevil reached a higher density on the plants which had more productive tillers and larger root system; the number of weevils per tiller correlated negatively with the percentage of withering/dead hearts of plants in a hill. These observations indicate that interspecific interactions exist between the rice water weevil and the rice stem borers with negative relations occurring at booting or earlier developmental stages of rice.

Do rice water weevils and rice stem borers compete when sharing a host plant?*

Science.gov (United States)

Shi, Sheng-wei; He, Yan; Ji, Xiang-hua; Jiang, Ming-xing; Cheng, Jia-an

2008-01-01

The rice water weevil (RWW) Lissorhoptrus oryzophilus Kuschel (Coleoptera: Curculionidae) is an invasive insect pest of rice Oryza sativa L. in China. Little is known about the interactions of this weevil with indigenous herbivores. In the present study, adult feeding and population density of the weevil, injury level of striped stem borer Chilo suppressalis (Walker) (Lepidoptera: Pyralidae) and pink stem borer Sesamia inferens (Walker) (Lepidoptera: Noctuidae) to rice, as well as growth status of their host plants were surveyed in a rice field located in Southeastern Zhejiang, China, in 2004 with the objective to discover interspecific interactions on the rice. At tillering stage, both adult feeding of the weevil and injury of the stem borers tended to occur on larger tillers (bearing 5 leaves) compared with small tillers (bearing 2~4 leaves), but the insects showed no evident competition with each other. At booting stage, the stem borers caused more withering/dead hearts and the weevil reached a higher density on the plants which had more productive tillers and larger root system; the number of weevils per tiller correlated negatively with the percentage of withering/dead hearts of plants in a hill. These observations indicate that interspecific interactions exist between the rice water weevil and the rice stem borers with negative relations occurring at booting or earlier developmental stages of rice. PMID:18600788

Yang-Mills theory for non-semisimple groups

CERN Document Server

Nuyts, J; Nuyts, Jean; Wu, Tai Tsun

2003-01-01

For semisimple groups, possibly multiplied by U(1)'s, the number of Yang-Mills gauge fields is equal to the number of generators of the group. In this paper, it is shown that, for non-semisimple groups, the number of Yang-Mills fields can be larger. These additional Yang-Mills fields are not irrelevant because they appear in the gauge transformations of the original Yang-Mills fields. Such non-semisimple Yang-Mills theories may lead to physical consequences worth studying. The non-semisimple group with only two generators that do not commute is studied in detail.

Chevron's Panna Maria mill process description

International Nuclear Information System (INIS)

Anon.

1979-01-01

Key features of Chevron's Uranium Mill located near Panna Maria, Texas, are described. The mill is designed to process a nominal 2500 dry tons/day of uranium bearing ore containing 15% uncombined moisture. The following operations at the mill are highlighted: ore receiving, grinding, leaching, countercurrent decantation and tailings disposal, filtering, solvent extraction, solvent stripping, precipitation, drying, and packaging

VOC Control in Kraft Mills; FINAL

International Nuclear Information System (INIS)

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-01-01

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA)

IMPROVEMENT OF RICE GROWTH AND PRODUCTIVITY THROUGH BALANCE APPLICATION OF INORGANIC FERTILIZER AND BIOFERTILIZER IN INCEPTISOL SOIL OF LOWLAND SWAMP AREA

Directory of Open Access Journals (Sweden)

Neni Marlina

2014-02-01

Full Text Available The objective of this study was to obtain a proper balance dose between biofertilizer and inorganic fertilizer in order to increase the growth and yield of rice in Inceptisol soil of lowland swamp origin. Biofertilizer was made by enriching straw compost with N2 interceptor bacteria, phosphate solvent bacteria and growth stimulator bacteria isolated from swamp lowland in South Sumatra. This study was conducted from November 2012 to March 2013 in a greenhouse. The design used was completely randomized design (CRD factorial, with two treatment factors consisting of inorganic fertilizer (0,25, 50, 75 and 100% recommended dosage and biofertilizer (0, 100, 200, 300, 400 and 500 kg.ha-1. The results showed that the best treatment in term of plant height at 8 weeks after planting (WAP, the maximum number of tillers, number of productive tillers, number of grains per panicle and weight of milled dry rice were obtained in combination of 75% inorganic fertilizer and 300 - 400 kg.ha-1biofertilizer.

Galilean Yang-Mills theory

Energy Technology Data Exchange (ETDEWEB)

Bagchi, Arjun [Center for Theoretical Physics, Massachusetts Institute of Technology,77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Basu, Rudranil [Saha Institute of Nuclear Physics,Block AF, Sector 1, Bidhannagar, Kolkata 700068 (India); Kakkar, Ashish [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Mehra, Aditya [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Van Swinderen Institute for Particle Physics and Gravity, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands)

2016-04-11

We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

Galilean Yang-Mills theory

International Nuclear Information System (INIS)

Bagchi, Arjun; Basu, Rudranil; Kakkar, Ashish; Mehra, Aditya

2016-01-01

We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

Effect of acetic acid on rice seeds coated with rice husk ash

Directory of Open Access Journals (Sweden)

Lizandro Ciciliano Tavares

2013-06-01

Full Text Available Flooded rice cultivation promotes anaerobic conditions, favoring the formation of short chain organic acids such as acetic acid, which may be toxic to the crop. The objective of this study was to evaluate the effect of acetic acid on rice seeds coated with rice husk ash. The experiment was arranged in a 2 x 5 x 5 factorial randomized design, with two cultivars (IRGA 424 and BRS Querência, five doses of coating material (0, 2, 3,4 e 5 g kg-1 seed and five concentrations of acetic acid (0, 3, 6, 9 and 12 mM, with 4 replications, totaling 50 treatments. The variables first count of germination, germination, shoot and root length, dry weight of shoots and roots were recorded. The results showed that coating rice seeds with rice husk ash up to 5 g kg-1 seed does not influence the performance of rice seeds of cultivars IRGA 424 and BRS Querência when exposed to concentrations of 12 mM acetic acid. The presence of acetic acid in the substrates used for seed germination reduced the vigor and viability of seeds of cultivars IRGA 424 and BRS Querência, as well as seedling development, affecting mainly the roots of BRS Querência.

Texture formation in iron particles using mechanical milling with graphite as a milling aid

Energy Technology Data Exchange (ETDEWEB)

Motozuka, S.; Hayashi, K. [Department of Mechanical Engineering, Gifu National College of Technology, 2236-2 Kamimakuwa, Motosu, Gifu 501-0495 (Japan); Tagaya, M. [Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Morinaga, M. [Toyota Physical and Chemical Research Institute, 41-1, Yokomichi, Nagakute, Aichi 480-1192 (Japan)

2015-09-15

Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method.

Texture formation in iron particles using mechanical milling with graphite as a milling aid

International Nuclear Information System (INIS)

Motozuka, S.; Hayashi, K.; Tagaya, M.; Morinaga, M.

2015-01-01

Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method

The impact of herbicide-resistant rice technology on phenotypic diversity and population structure of United States weedy rice.

Science.gov (United States)

Burgos, Nilda Roma; Singh, Vijay; Tseng, Te Ming; Black, Howard; Young, Nelson D; Huang, Zhongyun; Hyma, Katie E; Gealy, David R; Caicedo, Ana L

2014-11-01

The use of herbicide-resistant (HR) Clearfield rice (Oryza sativa) to control weedy rice has increased in the past 12 years to constitute about 60% of rice acreage in Arkansas, where most U.S. rice is grown. To assess the impact of HR cultivated rice on the herbicide resistance and population structure of weedy rice, weedy samples were collected from commercial fields with a history of Clearfield rice. Panicles from each weedy type were harvested and tested for resistance to imazethapyr. The majority of plants sampled had at least 20% resistant offspring. These resistant weeds were 97 to 199 cm tall and initiated flowering from 78 to 128 d, generally later than recorded for accessions collected prior to the widespread use of Clearfield rice (i.e. historical accessions). Whereas the majority (70%) of historical accessions had straw-colored hulls, only 30% of contemporary HR weedy rice had straw-colored hulls. Analysis of genotyping-by-sequencing data showed that HR weeds were not genetically structured according to hull color, whereas historical weedy rice was separated into straw-hull and black-hull populations. A significant portion of the local rice crop genome was introgressed into HR weedy rice, which was rare in historical weedy accessions. Admixture analyses showed that HR weeds tend to possess crop haplotypes in the portion of chromosome 2 containing the ACETOLACTATE SYNTHASE gene, which confers herbicide resistance to Clearfield rice. Thus, U.S. HR weedy rice is a distinct population relative to historical weedy rice and shows modifications in morphology and phenology that are relevant to weed management. © 2014 American Society of Plant Biologists. All Rights Reserved.

Comparison of various pretreatments for ethanol production enhancement from solid residue after rumen fluid digestion of rice straw.

Science.gov (United States)

Zhang, Haibo; Zhang, Panyue; Ye, Jie; Wu, Yan; Liu, Jianbo; Fang, Wei; Xu, Dong; Wang, Bei; Yan, Li; Zeng, Guangming

2018-01-01

The rumen digested residue of rice straw contains high residual carbohydrates, which makes it a potential cellulosic ethanol feedstock. This study evaluated the feasibility and effectiveness of applying microwave assisted alkali (MAP), ultrasound assisted alkali (UAP), and ball milling pretreatment (BMP) to enhance ethanol production from two digested residues (2.5%-DR and 10%-DR) after rumen fluid digestion of rice straw at 2.5% and 10.0% solid content. Results revealed that 2.5%-DR and 10%-DR had a cellulose content of 36.4% and 41.7%, respectively. MAP and UAP improved enzymatic hydrolysis of digested residue by removing the lignin and hemicellulose, while BMP by decreasing the particle size and crystallinity. BMP was concluded as the suitable pretreatment, resulting in an ethanol yield of 116.65 and 147.42mgg -1 for 2.5%-DR and 10%-DR, respectively. The integrated system including BMP for digested residue at 2.5% solid content achieved a maximum energy output of 7010kJkg -1 . Copyright © 2017 Elsevier Ltd. All rights reserved.

Use of air sampling data from uranium mills to estimate respiratory tract deposition rates for inhaled yellowcake

International Nuclear Information System (INIS)

Eidson, A.F.

1982-01-01

Uranium aerosols generated during normal yellowcake packaging operations were sampled at four uranium mills. Samplers located in the packaging area were operated before, during and after drums of dried yellowcake were filled and sealed. Mediar aerosol concentrations ranged from 0.04 μg U/l to 0.34 μg U/1 during the routine packaging operations at the four mills. The aerosols were heterogeneous and included a broad range of particle sizes. Both the concentrations and particle size distributions varied with time. Aerosol characteristics could often be related to individual packaging steps. Sampling of yellowcake by hand from a filled open drum to measure the yellowcake moisture content need not pose a unique hazard to the operator. The combined results show that appreciable amounts of airborne uranium would be expected to deposit in the nasopharyngeal compartment of the respiratory tract if inhaled by a worker not wearing respiratory protection

Residues and accumulation of molinate in rice crops and aquatic weeds in the MUDA rice agroecosystem

International Nuclear Information System (INIS)

Nashriyah Mat; Sabri Junoh; Nuriati Nurdin; Ramli Ishak

2002-01-01

Plant and soil residue levels and its accumulation in rice crops and rice aquatic weed plants were studied. Molinate residue levels in rice, weeds and soil were not significantly different between the recycled and the non-recycled area, even though they were higher in the non-recycled area. In the rice plant, the residue level at 10 DAT (days after treatment) was significantly higher than 30 DAT in the recycled area. In rice aquatic weed plants, the residue level was significantly higher at 10 DAT as compared to 30 DAT in the non-recycled area. Molinate residue levels in soil at 10 DAT and 30 DAT were similar. Molinate accumulated (ratio of molinate concentration in plant over soil) more in the rice crop as compared to rice aquatic weeds at 10 DAT, in both the recycled and the non-recycled areas. (Author)

Arsenic accumulation in rice: Consequences of rice genotypes and management practices to reduce human health risk.

Science.gov (United States)

Islam, Shofiqul; Rahman, Mohammad Mahmudur; Islam, M R; Naidu, Ravi

2016-11-01

Rice is an essential staple food and feeds over half of the world's population. Consumption of rice has increased from limited intake in Western countries some 50years ago to major dietary intake now. Rice consumption represents a major route for inorganic arsenic (As) exposure in many countries, especially for people with a large proportion of rice in their daily diet as much as 60%. Rice plants are more efficient in assimilating As into its grains than other cereal crops and the accumulation may also adversely affect the quality of rice and their nutrition. Rice is generally grown as a lowland crop in flooded soils under reducing conditions. Under these conditions the bioavailability of As is greatly enhanced leading to excessive As bioaccumulation compared to that under oxidizing upland conditions. Inorganic As species are carcinogenic to humans and even at low levels in the diet pose a considerable risk to humans. There is a substantial genetic variation among the rice genotypes in grain-As accumulation as well as speciation. Identifying the extent of genetic variation in grain-As concentration and speciation of As compounds are crucial to determining the rice varieties which accumulate low inorganic As. Varietal selection, irrigation water management, use of fertilizer and soil amendments, cooking practices etc. play a vital role in reducing As exposure from rice grains. In the meantime assessing the bioavailability of As from rice is crucial to understanding human health exposure and reducing the risk. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Effects of rice cleaning and cooking process on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice].

Science.gov (United States)

Satoh, Motoaki; Sakaguchi, Masayuki; Kobata, Masakazu; Sakaguchi, Yoko; Tanizawa, Haruna; Miura, Yuri; Sasano, Ryoichi; Nakanishi, Yutaka

2003-02-01

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.

Molecular evolution of the rice blast resistance gene Pi-ta in invasive weedy rice in the USA.

Directory of Open Access Journals (Sweden)

Seonghee Lee

Full Text Available The Pi-ta gene in rice has been effectively used to control rice blast disease caused by Magnaporthe oryzae worldwide. Despite a number of studies that reported the Pi-ta gene in domesticated rice and wild species, little is known about how the Pi-ta gene has evolved in US weedy rice, a major weed of rice. To investigate the genome organization of the Pi-ta gene in weedy rice and its relationship to gene flow between cultivated and weedy rice in the US, we analyzed nucleotide sequence variation at the Pi-ta gene and its surrounding 2 Mb region in 156 weedy, domesticated and wild rice relatives. We found that the region at and around the Pi-ta gene shows very low genetic diversity in US weedy rice. The patterns of molecular diversity in weeds are more similar to cultivated rice (indica and aus, which have never been cultivated in the US, rather than the wild rice species, Oryza rufipogon. In addition, the resistant Pi-ta allele (Pi-ta found in the majority of US weedy rice belongs to the weedy group strawhull awnless (SH, suggesting a single source of origin for Pi-ta. Weeds with Pi-ta were resistant to two M. oryzae races, IC17 and IB49, except for three accessions, suggesting that component(s required for the Pi-ta mediated resistance may be missing in these accessions. Signatures of flanking sequences of the Pi-ta gene and SSR markers on chromosome 12 suggest that the susceptible pi-ta allele (pi-ta, not Pi-ta, has been introgressed from cultivated to weedy rice by out-crossing.

Molecular Evolution of the Rice Blast Resistance Gene Pi-ta in Invasive Weedy Rice in the USA

Science.gov (United States)

Lee, Seonghee; Jia, Yulin; Jia, Melissa; Gealy, David R.; Olsen, Kenneth M.; Caicedo, Ana L.

2011-01-01

The Pi-ta gene in rice has been effectively used to control rice blast disease caused by Magnaporthe oryzae worldwide. Despite a number of studies that reported the Pi-ta gene in domesticated rice and wild species, little is known about how the Pi-ta gene has evolved in US weedy rice, a major weed of rice. To investigate the genome organization of the Pi-ta gene in weedy rice and its relationship to gene flow between cultivated and weedy rice in the US, we analyzed nucleotide sequence variation at the Pi-ta gene and its surrounding 2 Mb region in 156 weedy, domesticated and wild rice relatives. We found that the region at and around the Pi-ta gene shows very low genetic diversity in US weedy rice. The patterns of molecular diversity in weeds are more similar to cultivated rice (indica and aus), which have never been cultivated in the US, rather than the wild rice species, Oryza rufipogon. In addition, the resistant Pi-ta allele (Pi-ta) found in the majority of US weedy rice belongs to the weedy group strawhull awnless (SH), suggesting a single source of origin for Pi-ta. Weeds with Pi-ta were resistant to two M. oryzae races, IC17 and IB49, except for three accessions, suggesting that component(s) required for the Pi-ta mediated resistance may be missing in these accessions. Signatures of flanking sequences of the Pi-ta gene and SSR markers on chromosome 12 suggest that the susceptible pi-ta allele (pi-ta), not Pi-ta, has been introgressed from cultivated to weedy rice by out-crossing. PMID:22043312

Genome-wide analysis of Dongxiang wild rice (Oryza rufipogon Griff.) to investigate lost/acquired genes during rice domestication.

Science.gov (United States)

Zhang, Fantao; Xu, Tao; Mao, Linyong; Yan, Shuangyong; Chen, Xiwen; Wu, Zhenfeng; Chen, Rui; Luo, Xiangdong; Xie, Jiankun; Gao, Shan

2016-04-26

It is widely accepted that cultivated rice (Oryza sativa L.) was domesticated from common wild rice (Oryza rufipogon Griff.). Compared to other studies which concentrate on rice origin, this study is to genetically elucidate the substantially phenotypic and physiological changes from wild rice to cultivated rice at the whole genome level. Instead of comparing two assembled genomes, this study directly compared the Dongxiang wild rice (DXWR) Illumina sequencing reads with the Nipponbare (O. sativa) complete genome without assembly of the DXWR genome. Based on the results from the comparative genomics analysis, structural variations (SVs) between DXWR and Nipponbare were determined to locate deleted genes which could have been acquired by Nipponbare during rice domestication. To overcome the limit of the SV detection, the DXWR transcriptome was also sequenced and compared with the Nipponbare transcriptome to discover the genes which could have been lost in DXWR during domestication. Both 1591 Nipponbare-acquired genes and 206 DXWR-lost transcripts were further analyzed using annotations from multiple sources. The NGS data are available in the NCBI SRA database with ID SRP070627. These results help better understanding the domestication from wild rice to cultivated rice at the whole genome level and provide a genomic data resource for rice genetic research or breeding. One finding confirmed transposable elements contribute greatly to the genome evolution from wild rice to cultivated rice. Another finding suggested the photophosphorylation and oxidative phosphorylation system in cultivated rice could have adapted to environmental changes simultaneously during domestication.