WorldWideScience

Sample records for rice flour electronic

  1. Method of Converting Wheat Flour Quantity into Rice Flour Quantity in Cookies (Part-1)

    OpenAIRE

    村田,美穂子; 髙橋,由加

    2016-01-01

    A method of converting the wheat flour quantity of a recipe of wheat-flour cookies into the rice flour quantity of a recipe of rice-flour cookies used domestically for wheat-allergic children was studied. The proportion of the water content with respect to the flour content (the wheat or rice flour content) in cut cookies prepared according to a commercially available recipe was obtained. Next, four types of rice-flour cookies were prepared according to a recipe for wheat-flour cookies using ...

  2. Storage stability of flour-blasted brown rice

    Science.gov (United States)

    Brown rice was blasted with rice flour rather than sand in a sand blaster to make microscopic nicks and cuts so that water can easily penetrate into the brown rice endosperm and cook the rice in a shorter time. The flour-blasted American Basmati brown rice, long grain brown rice, and parboiled long...

  3. Characteristics of bread prepared from wheat flours blended with various kinds of newly developed rice flours.

    Science.gov (United States)

    Nakamura, S; Suzuki, K; Ohtsubo, K

    2009-04-01

    Characteristics of the bread prepared from wheat flour blended with the flour of various kinds of newly developed rice cultivars were investigated. Qualities of the bread made from wheat flour blended with rice flour have been reported to be inferior to those from 100% wheat flour bread. To improve its qualities, we searched for the new-characteristic rice flours among the various kinds of newly developed rice cultivars to blend with the wheat flour for the bread preparation. The most suitable new characteristic rices are combination of purple waxy rice, high-amylose rice, and sugary rice. Specific volume of the bread from the combination of wheat and these 3 kinds of rice flours showed higher specific volume (3.93) compared with the traditional wheat/rice bread (3.58). We adopted the novel method, continuous progressive compression test, to measure the physical properties of the dough and the bread in addition to the sensory evaluation. As a result of the selection of the most suitable rice cultivars and blending ratio with the wheat flour, we could develop the novel wheat/rice bread, of which loaf volume, physical properties, and tastes are acceptable and resistant to firming on even 4 d after the bread preparation. To increase the ratio of rice to wheat, we tried to add a part of rice as cooked rice grains. The specific volume and qualities of the bread were maintained well although the rice content of total flour increased from 30% to 40%.

  4. Quality assessment of dry noodles made from blend of mocaf flour, rice flour and corn flour

    Science.gov (United States)

    Afifah, N.; Ratnawati, L.

    2017-12-01

    Mocaf flour, rice flour, and corn flour in different concentrations were used to produce dry noodles. The aims of this study were to investigate physicochemical properties of the flours and the quality characteristics of dry noodles made from these flours. Dry noodles were prepared by gelatinization of blending flours followed by feeding the dough to extruder and drying overnight in room temperature. Flours were analyzed for chemical and pasting properties and noodle samples were evaluated for chemical, cooking, and texture properties. The results showed there were significant differences in protein content and elongation between noodles made from blending mocaf and rice flour with that of blending mocaf, rice, and corn flour. The moisture, ash, and protein content of noodle samples ranged from 10.98 to 14.18%, 1.23 to 1.39%, and 4.09 to 5.58%, respectively. Values of noodle cooking quality were ranging from 12.0 - 13.8 minutes, 10.6 to 14.3%, and 204 to 248%, respectively for cooking time, cooking loss, and cooking weight. The elongation, hardness, and adhesiveness of noodles ranged from 276 to 374%, 3,523 to 10,478 gf, and -81.99 to -52.49 g.sec.

  5. Effects of milling on functional properties of rice flour.

    Science.gov (United States)

    Kadan, R S; Bryant, R J; Miller, J A

    2008-05-01

    A commercial long-grain rice flour (CRF) and the flours made by using a pin mill and the Udy mill from the same batch of broken second-head white long-grain rice were evaluated for their particle size and functional properties. The purpose of this study was to compare the commercial rice flour milling method to the pin and Udy milling methods used in our laboratory and pilot plant. The results showed that pin milled flour had more uniform particle size than the other 2 milled flours. The chalky kernels found in broken white milled rice were pulverized more into fines in both Udy milled flour and CRF than in the pin milled flour. The excessive amount of fines in flours affected their functional properties, for example, WSI and their potential usage in the novel foods such as rice breads (RB). The RB made from CRF collapsed more than loaves made from pin milled Cypress long-grain flours.

  6. Physical and structural changes induced by high pressure on corn starch, rice flour and waxy rice flour.

    Science.gov (United States)

    Cappa, Carola; Lucisano, Mara; Barbosa-Cánovas, Gustavo V; Mariotti, Manuela

    2016-07-01

    The impact of high pressure (HP) processing on corn starch, rice flour and waxy rice flour was investigated as a function of pressure level (400MPa; 600MPa), pressure holding time (5min; 10min), and temperature (20°C; 40°C). Samples were pre-conditioned (final moisture level: 40g/100g) before HP treatments. Both the HP treated and the untreated raw materials were evaluated for pasting properties and solvent retention capacity, and investigated by differential scanning calorimetry, X-ray diffractometry and environmental scanning electron microscopy. Different pasting behaviors and solvent retention capacities were evidenced according to the applied pressure. Corn starch presented a slower gelatinization trend when treated at 600MPa. Corn starch and rice flour treated at 600MPa showed a higher retention capacity of carbonate and lactic acid solvents, respectively. Differential scanning calorimetry and environmental scanning electron microscopy investigations highlighted that HP affected the starch structure of rice flour and corn starch. Few variations were evidenced in waxy rice flour. These results can assist in advancing the HP processing knowledge, as the possibility to successfully process raw samples in a very high sample-to-water concentration level was evidenced. This work investigates the effect of high pressure as a potential technique to modify the processing characteristics of starchy materials without using high temperature. In this case the starches were processed in the powder form - and not as a slurry as in previously reported studies - showing the flexibility of the HP treatment. The relevance for industrial application is the possibility to change the structure of flour starches, and thus modifying the processability of the mentioned products. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. X-ray photoelectron spectroscopic analysis of rice kernels and flours: Measurement of surface chemical composition.

    Science.gov (United States)

    Nawaz, Malik A; Gaiani, Claire; Fukai, Shu; Bhandari, Bhesh

    2016-12-01

    The objectives of this study were to evaluate the ability of X-ray photoelectron spectroscopy (XPS) to differentiate rice macromolecules and to calculate the surface composition of rice kernels and flours. The uncooked kernels and flours surface composition of the two selected rice varieties, Thadokkham-11 (TDK11) and Doongara (DG) demonstrated an over-expression of lipids and proteins and an under-expression of starch compared to the bulk composition. The results of the study showed that XPS was able to differentiate rice polysaccharides (mainly starch), proteins and lipids in uncooked rice kernels and flours. Nevertheless, it was unable to distinguish components in cooked rice samples possibly due to complex interactions between gelatinized starch, denatured proteins and lipids. High resolution imaging methods (Scanning Electron Microscopy and Confocal Laser Scanning Microscopy) were employed to obtain complementary information about the properties and location of starch, proteins and lipids in rice kernels and flours. Copyright © 2016. Published by Elsevier Ltd.

  8. Fermented Brown Rice Flour as Functional Food Ingredient

    OpenAIRE

    Ilowefah, Muna; Chinma, Chiemela; Bakar, Jamilah; Ghazali, Hasanah; Muhammad, Kharidah; Makeri, Mohammad

    2014-01-01

    As fermentation could reduce the negative effects of bran on final cereal products, the utilization of whole-cereal flour is recommended, such as brown rice flour as a functional food ingredient. Therefore, this study aimed to investigate the effect of fermented brown rice flour on white rice flour, white rice batter and its steamed bread qualities. Brown rice batter was fermented using commercial baker?s yeast (Eagle brand) according to the optimum conditions for moderate acidity (pH 5.5) to...

  9. Effects of the components in rice flour on thermal radical generation under microwave irradiation.

    Science.gov (United States)

    Lin, Lufen; Huang, Luelue; Fan, Daming; Hu, Bo; Gao, Yishu; Lian, Huizhang; Zhao, Jianxin; Zhang, Hao; Chen, Wei

    2016-12-01

    The relationships between radical generation under microwave irradiation and the components of various types of rice flour were investigated. Electron paramagnetic resonance (EPR) spectroscopy was used to characterize the radicals found in rice flour samples. The EPR spectra revealed that several types of radical (carbon-centered, tyrosyl and semiquinone) were localized in the starch and protein fractions of the rice flour. The signal intensity of the free radicals was observed to increase exponentially with increasing microwave power and residence time. The rice bran samples exhibited the greatest free radical signal intensity, followed by the brown rice samples and the white rice samples. This finding was consistent for both the native and the microwaved samples. The ratio of rice starch to rice protein also played an important role in the generation of radicals. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Effect of Rice bran on the Quality of Rice Flour Breads (Gluten-free)

    OpenAIRE

    仲上, 晴世; 矢部, えん; Haruyo, Nakagami; En, Yabe

    2016-01-01

    Over recent years progress has been made in the development of substitute foods for allergy patients. One such is rice flour bread. However, typically rice flour bread uses polysaccharide thickener in substitution for the gluten in wheat. Most polysaccharide thickeners are of dietary fiber origin, and the nutritive value is poor. Therefore, in this study, I made rice flour bread adding rice bran in place of polysaccharide thickener. Various nutrients are included in rice bran, including vitam...

  11. Characteristics of Analog Rice From Potato Flour (Solanum Tuberosom L.) Corn Flour (Zea Mays L.) and Sago Flour (Arenga Microcarpa Beccari)

    OpenAIRE

    Korompis, Olga S; Mamuaja, Christine F; Mandey, Lucia C

    2016-01-01

    Potato (Solanum tuberosum L.), corn (Zea mays L.) and sago (Arenga microcarpa Beccari) are crops containing high carbohydrate, as source of calory food, and those can be made into rice analog. This study aimed: (1) to determine the formulations by organoleptic test in manufacture analog rice from potato flour, corn flour and sago flour, and (2) to analyze the physical properties, chemical properties of rice analog from potato flour with the addition of corn flour and sago flour. The research ...

  12. Fermented Brown Rice Flour as Functional Food Ingredient.

    Science.gov (United States)

    Ilowefah, Muna; Chinma, Chiemela; Bakar, Jamilah; Ghazali, Hasanah M; Muhammad, Kharidah; Makeri, Mohammad

    2014-02-12

    As fermentation could reduce the negative effects of bran on final cereal products, the utilization of whole-cereal flour is recommended, such as brown rice flour as a functional food ingredient. Therefore, this study aimed to investigate the effect of fermented brown rice flour on white rice flour, white rice batter and its steamed bread qualities. Brown rice batter was fermented using commercial baker's yeast (Eagle brand) according to the optimum conditions for moderate acidity (pH 5.5) to obtain fermented brown rice flour (FBRF). The FBRF was added to white rice flour at 0%, 10%, 20%, 30%, 40% and 50% levels to prepare steamed rice bread. Based on the sensory evaluation test, steamed rice bread containing 40% FBRF had the highest overall acceptability score. Thus, pasting properties of the composite rice flour, rheological properties of its batter, volume and texture properties of its steamed bread were determined. The results showed that peak viscosity of the rice flour containing 40% FBRF was significantly increased, whereas its breakdown, final viscosity and setback significantly decreased. Viscous, elastic and complex moduli of the batter having 40% FBRF were also significantly reduced. However, volume, specific volume, chewiness, resilience and cohesiveness of its steamed bread were significantly increased, while hardness and springiness significantly reduced in comparison to the control. These results established the effectiveness of yeast fermentation in reducing the detrimental effects of bran on the sensory properties of steamed white rice bread and encourage the usage of brown rice flour to enhance the quality of rice products.

  13. RHEOLOGICAL PROPERTIES AND THE ENERGETIC VALUE OF WHEAT FLOUR SUBSTITUTED BY DIFFERENT SHARES OF WHITE AND BROWN RICE FLOUR

    Directory of Open Access Journals (Sweden)

    Nada Nikolić

    2011-09-01

    Full Text Available In order to produce dough with a lower gluten content, more enriched with rice components and satisfactory rheological properties, the rheological properties, energetic value and cake baking properties of wheat and white or brown rice flour in shares from 3 to 30% (w/w were investigated in this paper. The water absorption in wheat-rice flour mixtures was lower and decreased to 53.5% and 54.0% along with the increase of the white and the brown rice flour share, respectively, than in wheat flour, where it was 58.8%. In the dough made from rice flour, a gluten network had thinner filaments, about 2 and 1 μm in width for white and brown rice flour, respectively, compared to those in the dough from wheat flour only, where it was about 7 μm. The dough from rice flour had almost twice higher gelatinization maximum than the gelatinization maximum of the wheat flour only. The energetic values of the dough from rice flour were smaller than the energetic value of the wheat flour, for only 1.32%. Based on Cluster analysis, the white or brown rice flour share of 20% was pointed out.

  14. Salinity alters the protein composition of rice endosperm and the physicochemical properties of rice flour.

    Science.gov (United States)

    Baxter, Graeme; Zhao, Jian; Blanchard, Christopher

    2011-09-01

    Salinity is one of the major threats to production of rice and other agricultural crops worldwide. Although numerous studies have shown that salinity can severely reduce rice yield, little is known about its impact on the chemical composition, processing and sensory characteristics of rice. The objective of the current study was to investigate the effect of salinity on the pasting and textural properties of rice flour as well as on the protein content and composition of rice endosperm. Rice grown under saline conditions had significantly lower yields but substantially higher protein content. The increase in protein content was mainly attributed to increases in the amount of glutelin, with lesser contributions from albumin. Salinity also altered the relative proportions of the individual peptides within the glutelin fraction. Flours obtained from rice grown under saline conditions showed significantly higher pasting temperatures, but lower peak and breakdown viscosities. Rice gels prepared from the flour showed significantly higher hardness and adhesiveness values, compared to the freshwater controls. Salinity can significantly affect the pasting and textural characteristics of rice flour. Although some of the effects could be attributed to changes in protein content of the rice flour, especially the increased glutelin level, the impact of salinity on the physicochemical properties of rice is rather complex and may involve the interrelated effects of other rice components such as starch and lipids. Copyright © 2011 Society of Chemical Industry.

  15. Physico-chemical properties of gluten-free pancakes from rice and sweet potato flours.

    Science.gov (United States)

    Gluten-free pancakes were prepared using rice flour, and rice flour replaced with various amounts, at 10, 20 and 40%, of sweet potato flour. The apparent viscosity of the pancake batter increased with increased sweet potato flour replacement. Texture properties of the cooked pancakes, such as, har...

  16. Evaluation of rice flour for use in vanilla ice cream.

    Science.gov (United States)

    Cody, T L; Olabi, A; Pettingell, A G; Tong, P S; Walker, J H

    2007-10-01

    The effects of varying concentrations (2, 4, and 6%) of 2 types of rice flours (RF 1 and RF 2) on the physicochemical properties and sensory characteristics of vanilla ice cream samples were assessed at different fat levels (0, 4, and 10%) and storage conditions (control vs. heat-shocked). Fat and total solids were measured as well as hardness, viscosity, and melting rate. Eight trained panelists conducted descriptive sensory analyses of the samples at 0 and 7 wk. The 2% rice flour level and to a certain extent the 4% usage level generally improved texture while affecting to a lesser extent the flavor characteristics of the samples compared with the control. The RF 2 generally had a more significant effect than RF 1, especially on the texture attributes. Although the rice flour reduced the negative impact of temperature abuse on textural properties, the samples still deteriorated in textural properties (more icy) under temperature abuse conditions. In addition, rice starch does lower perceived sweetness and can have a "flour flavor" at high usage levels. The use of rice flour appears to be most advantageous for low fat ice cream samples.

  17. Effect of Hydrothermal Treatment on the Physicochemical, Rheological, and Oil-Resistant Properties of Rice Flour

    Science.gov (United States)

    Rice flour was thermo-mechanically modified by steam jet-cooking and the physico-chemical and rheological properties of the resulting product were characterized. Then, its performance in frying batters was evaluated as an oil barrier. Compared to native rice flour, the steam jet-cooked rice flour ...

  18. Characterization of pre-gelatinized rice and bean flour

    Directory of Open Access Journals (Sweden)

    Ana Vânia Carvalho

    2013-06-01

    Full Text Available The objective of this study was to develop a pre-gelatinized flour using a mixture of broken rice and split beans by thermoplastic extrusion, and to evaluate the physicochemical, nutritional, and technological quality of the final product. The extrusion parameters were maintained using three heating zones with temperatures of 30 ºC, 40 ºC, and 70 ºC; screw speed of 177 rpm; feed rate of 257 g/m, and circular matrix of 3.85 mm. The following characterization analyses were performed: physicochemical, nutritional, water absorption index (WAI, water solubility index (WSI, and paste viscosity. The pre-gelatinized rice and bean flour had an intermediate value of WAI, 7.51 g/g, and high WSI value, 24.61%. Regarding proteins, it was verified an average content of 12.9% in the final product. The amino acid contents found in the pre-gelatinized flour indicate that the mixture has the essential amino acids. It was also found that the pre-gelatinized flour supplies more than 60% of the essential amino acids recommended for children aged one to three years old. The gelatinized flour composed of broken rice and split beans is an alternative to the use of these by-products of the manufacture process of rice and beans to obtain a product with viable technological characteristics and high nutritional value.

  19. Optimization of Bread Preparation from Wheat Flour and Malted Rice Flour

    Directory of Open Access Journals (Sweden)

    Subajiny VELUPPILLAI

    2010-03-01

    Full Text Available The feasibility of partially replacing wheat flour with malted rice flour in bread making was evaluated in several formulations, aiming to find a formulation for the production of malted rice-wheat bread with better nutritional quality and consumer acceptance. The whole grains of a local rice variety (Oryza sativa L. subsp. indica var. Mottaikaruppan were steeped in distilled water (12 h, 30°C and germinated for 3 days to obtain high content of soluble materials and amylase activity in bread making. The quality of bread was evaluated by considering the physical and sensorial parameters. When the wheat flour was substituted with malted rice flour, 35% substitution level and the malted rice flour from 3 days of germination was the best according to the physical and sensory qualities of bread. The quality of bread was improved by the addition of 20 g of margarine, 20 g of baking powder and 20 g of yeast in 1 kg of flour. Among different ratios of yeast and baking powder, 2:1 was the best. Bread improver containing amylases and oxidizing agents at the concentration of 40 g/kg was selected as the best concentration. When comparing the final formulation made in the bakery with wheat bread, malted rice-wheat bread contains more soluble dietary fiber (0.62%, insoluble dietary fiber (3.95%, total dietary fiber (4.57% and free amino acid content (0.64 g/kg than those in wheat bread (0.5%, 2.73%, 3.23% and 0.36 g/kg, respectively.

  20. Effects of Variety and Hydration of Rice Flour on Cake Making Properties

    OpenAIRE

    長沼, 誠子; NAGANUMA, Seiko

    1993-01-01

    The pysicochemical characteristics and sensory attributes of rice layer cake were investigated to study the effects of rice variety and rice flour treatment on cake making properties. The rice layer cake were made from rice flour ground from 4 rice varieties (Sasanishiki, Akitakomachi, Kiyonishiki and Akihikari), water, sugar, oil, and baking powder. The treatment of rice frour with water before adding other ingredients improved appearance, texture and palatability of the baking products. The...

  1. Effect of germination on the physicochemical and antioxidant characteristics of rice flour from three rice varieties from Nigeria.

    Science.gov (United States)

    Chinma, Chiemela Enyinnaya; Anuonye, Julian Chukwuemeka; Simon, Omotade Comfort; Ohiare, Raliat Ozavize; Danbaba, Nahemiah

    2015-10-15

    This study determined the effect of germination (48 h) on the physicochemical and antioxidant characteristics of rice flour from three rice varieties from Nigeria. Local rice varieties (Jamila, Jeep and Kwandala) were evaluated and compared to an improved variety (MR 219). Physicochemical and antioxidant properties of flours were determined using standard methods. Protein, magnesium, phosphorus, potassium and antioxidant properties of rice flours increased after germination while phytic acid and total starch contents decreased. Foaming capacity and stability of rice flours increased after germination. Germination resulted to changes in pasting and thermal characteristics of rice flours. Germinated rice flours had better physicochemical and antioxidant properties with reduced phytic acid and starch contents compared to MR 219, which can be utilized as functional ingredients in the preparation of rice-based products. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Quality characteristics of bread produced from wheat, rice and maize flours.

    Science.gov (United States)

    Rai, Sweta; Kaur, Amarjeet; Singh, Baljit; Minhas, K S

    2012-12-01

    Rice (Oryza sativa) flour and maize (Zea mays) meal substitution in wheat (Triticum aestivum) flour, from 0 to 100% each, for the production of bread was investigated. The proximate analysis, pasting properties, bread making qualities of raw materials and sensory evaluation of the bread samples were determined. The pasting temperature increased with increased percentage of rice flour and maize meal. But the other pasting characters decreased with the higher proportion of rice flour. The baking absorption was observed to increase with higher level of maize meal but it decreased when level of rice flour was increased. Loaf weight (g) decreased with progressive increase in the proportion of maize meal but increased when rice flour incorporation was increased. Loaf volume, loaf height and specific volume decreased for progressively higher level of maize meal and rice flour. The sensory evaluation revealed that 25% replacement of wheat flour was found to be more acceptable than control sample.

  3. Effect of Substituting Purple Rice Flour for Wheat Flour on Physicochemical Characteristics, In Vitro Digestibility, and Sensory Evaluation of Biscuits

    Directory of Open Access Journals (Sweden)

    Warinporn Klunklin

    2018-01-01

    Full Text Available Purple rice flour contains high levels of a number of antioxidant compounds; however, it has seldom been used as an ingredient in bakery products. The aim was to increase the nutritional value of biscuits by adding purple rice flour to a basic wheat flour biscuit. The substitution of purple rice flour in place of wheat flour modified the characteristics of the biscuits in terms of increasing the nutritional values. They contained high fiber, antioxidants, and antioxidant activities, while slightly changing the physical properties such as hardness and spread ratio. The study showed that the protein digestibility increased as the content of the purple rice flour was increased in the biscuit mix. The 100% purple rice flour biscuits had the lowest predicted glycemic index (pGI of all the biscuits. Sensory analysis showed that the overall acceptability of the blended flour biscuits at 25 and 50% substitution levels was slightly less than that of the control biscuits with only 9%; however, the scores were above 5 which means the panelists still liked the biscuits a lot. Overall, the inclusion of purple rice flour in biscuits mix increased crude protein content, protein digestibility, and bioactive compounds with acceptable sensory scores from consumers up to 50% substitution of purple rice.

  4. Physicochemical properties of gluten-free pancakes from rice and sweet potato flours

    Science.gov (United States)

    Gluten-free pancakes were prepared using rice flour and rice flour replaced with various amounts, at 10, 20 and 40%, of sweet potato flour. Textural properties of the cooked pancakes, such as hardness and chewiness generally increased with time after cooking, whereas they decreased with increased sw...

  5. Hydrophobicity of stored (15, 35 °C), or dry-heated (120 °C) rice flour and deteriorated breadmaking properties baked with these treated rice flour/fresh gluten flour.

    Science.gov (United States)

    Nakagawa, Mariko; Tabara, Aya; Ushijima, Yuki; Matsunaga, Kotaro; Seguchi, Masaharu

    2016-05-01

    Rice flour was stored at 15 °C/9 months, at 35 °C/14 days, or dry-heated at 120 °C/20 min. The breadmaking properties baked with this rice flour/fresh gluten flour deteriorated. In addition, the rice flour was mixed with oil in water vigorously, and oil-binding ability was measured. Every rice flour subjected to storage or dry-heated at 120 °C showed higher hydrophobicity, owing to changes in proteins. Then, proteins in the stored rice flour were excluded with NaOH solution, and bread baked with the deproteinized rice flour showed the same breadmaking properties as unstored rice flour/fresh gluten flour. The viscoelasticity of wheat glutenin fraction decreased after the addition of dry-heated rice flour in a mixograph profile. DDD staining increased Lab in color meter, which suggested an increase in SH groups in rice protein. The increase in SH groups caused a reduction in wheat gluten protein resulting in a deterioration of rice bread quality. .

  6. Development of instant noodles from high-iron rice and iron-fortified rice flour

    Directory of Open Access Journals (Sweden)

    Suparat Reungmaneepaitoon

    2008-08-01

    Full Text Available Instant high-iron noodles, prepared from wheat flour and high iron brown rice flour, were developed. Three varieties of rice flour, Suphan Buri 90 (SB, Homnin 313 (HW and Homnin 1000 (HP, containing amylose content of 30.40, 19.10 and 15.74% (w/w and iron content of 1.24, 2.04 and 2.22 (mg/100 g respectively, were used to replace wheat flour for instant fried noodle production. To determine the physicochemical properties and acceptability of instant fried noodles,different percentages (30, 40, 50% (w/w of each rice flour sample were used. The instant fried noodles were fortified with ferrous sulphate at levels of 0, 32, 64% iron of RDI per serving. Increasing amount of iron content in the mixtures decreased the L* value, b* value and increased a* value for the color of the instant fried noodle with brown rice flour. The texture characteristic of the noodles with 30, 40, 50% replacement with each variety of brown rice flour were significantly different from those of wheat noodle. Tensile force of the noodles decreased from 11.57±1.30 g to 6.38±1.45 g (SB, 8.36±0.96 g to 5.71±0.57 g (HP and 10.09±1.20 g to 5.46±1.31 g (HW as the rice flour content increased from 30 to 50%. The sensoryacceptability of the noodles made from each variety of 30% brown rice flour fortified with 32% iron of RDI had higher preference scores for elasticity, firmness, color and overall acceptability, than those with 64% iron of RDI. Instant fried noodles with HW and HP brown rice flour were subjected to consumer test using 100 rural primary school children. The frequency percent of the acceptability scores of the noodle with HP and HW were 88 and 84% respectively. Shelf life studyrevealed that the developed products were still acceptable up to 4 months. These products were claimed to be high iron noodle.

  7. Evaluation of the Hypoglycemic Effect of Composite Rice Flour in Diabetic Mice.

    Science.gov (United States)

    Ding, Zhigang; Gao, Hongmei; Du, Chuanlai; Zheng, Yimei; Guo, Yuanxin; Pan, Dongmei

    2016-03-01

    To study the hypoglycemic effect of composite rice flour, the diabetic mouse model was established through the intraperitoneal injection of alloxan saline (twice, 200 mg/kg bw). The mice were randomly divided into 4 groups: negative control, positive control, metformin medication group, and composite rice flour feed group. After 21 days, the fasting blood glucose levels were determined by glucose oxidase method and followed with a glucose tolerance test. The results show that the body weight growth rate of mice in the rice flour group was significantly higher than that of the medication group (P rice flour group were significantly lower, and the glucose tolerance was significantly increased in rice flour group (P rice flour has obvious hypoglycemic and protective effect for diabetic mouse model.

  8. Studies on the effect of brown rice and maize flour on the quality of bread

    OpenAIRE

    Islam, M.Z; Shams, M.

    2011-01-01

    Breads were prepared with various combinations of maize, brown rice and wheat flours in the basic formulation of bread. The baking properties and chemical composition of bread were evaluated and analysed, respectively. The bread volume decreased, where as bread weight and moisture content increased with the increasing level of maize and brown rice flour. The crumb and crust colour of breads were improved with addition of 8% maize and 8% brown rice flour in bread formulation. The protein conte...

  9. Germination conditions affect physicochemical properties of germinated brown rice flour.

    Science.gov (United States)

    Charoenthaikij, Phantipha; Jangchud, Kamolwan; Jangchud, Anuvat; Piyachomkwan, Kuakoon; Tungtrakul, Patcharee; Prinyawiwatkul, Witoon

    2009-01-01

    Germinated brown rice has been reported to be nutritious due to increased free gamma-aminobutyric acid (GABA). The physicochemical properties of brown rice (BR) and glutinous brown rice (GNBR) after germination as affected by different steeping times (24, 36, 48, and 72 h depending on the rice variety) and pHs of steeping water (3, 5, 7, and as-is) were determined and compared to those of the nongerminated one (control). As the steeping time increased or pH of steeping water decreased, germinated brown rice flours (GBRF) from both BR and GNBR had greater reducing sugar, free GABA and alpha-amylase activity; while the total starch and viscosity were lower than their respective controls. GBRFs from both BR and GNBR prepared after 24-h steeping time at pH 3 contained a high content of free GABA at 32.70 and 30.69 mg/100 g flour, respectively. The peak viscosity of GBRF obtained from both BR and GNBR (7.42 to 228.22 and 4.42 to 58.67 RVU, respectively) was significantly lower than that of their controls (255.46 and 190.17 RVU, respectively). The principal component analysis indicated that the important variables for discriminating among GBRFs, explained by the first 2 components at 89.82% of total explained variance, were the pasting profiles, alpha-amylase activity, and free GABA.

  10. Rice starch vs. rice flour: differences in their properties when modified by heat-moisture treatment.

    Science.gov (United States)

    Puncha-arnon, Santhanee; Uttapap, Dudsadee

    2013-01-02

    Starch and flour from the same rice grain source (with 20, 25 and 30% moisture content) were exposed to heat-moisture treatment (HMT) at 100 °C for 16 h in order to investigate whether there were differences in their susceptibility to modification by HMT and, if any, to determine the main causes of the differences. HMT had a far greater effect on paste viscosity of flour than of starch. A significant increase in paste viscosity after removal of proteins from HMT flour - as well as images of fast green-stained HMT flour gels - indicated that an important role was played by proteins in affecting properties of the modified samples. Greater effects of HMT on thermal parameters of gelatinization and gel hardness values of flours were observed - more so than those for starches. Following this observation, it was ascertained that components in rice flour other than rice starch granules also underwent alterations during HMT. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. [Extruded rice flour as a gluten substitute in the poduction of rice bread].

    Science.gov (United States)

    Clerici, Maria Teresa Pedrosa Silva; El-Dash, Ahmed A

    2006-09-01

    Research regarding the production of gluten-free bread (GFB) is very important nutritionally, technically and economically speaking, both to celiac patients and to developing countries who import wheat. The main technological problem in the production of GFB is obtaining a gluten substitute that is both inexpensive and capable of retaining gas during bread fermentation and baking. The use of gelatinized starch as an alternative for gluten seems promising. In this project, rice bread was made using pregelatinized extruded rice flour as a gluten substitute. Pre-gelatinized rice flours (PRF) were manufactured in a single screw Brabender extruder, varying extrusion temperature (108-192 degrees C) and the moisture of the raw material (19.2 - 24.8%), and were used in a proportion of 10 g for every 100 g of raw rice flour, in the production of gluten-free bread. Results showed that rice flour extruded at a high temperature (180 degrees) and low moisture content (20%), rendered bread with the best technological characteristics, presenting crust and crumb color similar to those of conventional wheat bread, although with volume and texture not as satisfactory in the same comparison.

  12. Production of glutinous rice flour from broken rice via ultrasonic assisted extraction of amylose.

    Science.gov (United States)

    Setyawati, Yohana Dwi; Ahsan, Sitti Faika; Ong, Lu Ki; Soetaredjo, Felycia Edi; Ismadji, Suryadi; Ju, Yi-Hsu

    2016-07-15

    In this study, a modified aqueous leaching method by complex formation of amylose with glycerol was employed for reducing the amylose content of starch in broken white rice to less than 2%, so that the resulting starch can be classified to that of glutinous rice flour. By employing ultrasonication in alkaline condition, extraction of amylose could be performed by washing at lower temperature in shorter time compared to the existing aqueous leaching method. The effects of glycerol concentration, alkali concentration, ultrasonication and treatment time on the amylose content of the treated starch were systematically investigated. Under optimum condition, amylose content of broken white rice starch can be reduced from 27.27% to 1.43% with a yield of 80.42%. The changes in the physicochemical properties of the rice flour before and after treatment were studied. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Influence of grain activation conditions on functional characteristics of brown rice flour.

    Science.gov (United States)

    Singh, Arashdeep; Sharma, Savita; Singh, Baljit

    2017-09-01

    Grain activation is a natural processing technique that can be used to produce modified flours without chemical modification. Functional characteristics of brown rice flour as influenced by grain activation time and temperatures were investigated. Germination temperatures at 25 ℃, 30 ℃ and 35 ℃ and time for 12, 24, 36 and 48 h significantly influenced the functional properties of flour with modification of starch, protein and high enzymatic activity. Significant decrease in the bulk density, water absorption and swelling power of brown rice flour was observed in comparison to non-germinated flour. Gel consistency and oil absorption capacity of brown rice flour increased as the grain activation time and temperature were increased. Native flour had lowest emulsion and foaming properties, while increase in grain activation time and temperature enhanced the emulsifying and foaming properties of flour. Paste clarity of native flour was 54% which was reduced to 25.17%; however, increase in germination time and temperature increased the % synersis values of germinated flour. Native flour had least gelation concentration of 12% which increased to 25% after 48 h of germination at 35 ℃. Overall, germination can be used as a natural way to modify the functional properties of brown rice flours for their utilization in variety food products.

  14. Morphological and starch structural characteristics of the Japonica rice mutant variety Seolgaeng for dry-milled flour

    Science.gov (United States)

    Producing fine, good quality rice flour is more difficult than wheat flour because the rice grain is harder. In this study, we analyzed the relationship between the morphology and starch of kernels from genetically different rice varieties that can be used to make dry-milled flour. The non-glutinous...

  15. Effect of Flour Concentration and Retrogradation Treatment on Physical Properties of Instant Sinlek Brown Rice

    OpenAIRE

    Supat Chaiyakul; Direk Sukkasem; Patnachapa Natthapanpaisith

    2016-01-01

    Sinlek rice flour beverage or instant product is a dietary supplement for dysphagia, or difficulty swallowing. It is also consumed by individuals who need to consume supplements to maintain their calorific needs. This product provides protein, fat, iron, and a high concentration of carbohydrate from rice flour. However, the application of native flour is limited due to its high viscosity. Starch modification by controlling starch retrogradation was used in this study. The research studies the...

  16. Photoluminescence and thermally stimulated luminescence characteristics of rice flour

    International Nuclear Information System (INIS)

    Murthy, K.V.R.; Rey, L.; Belon, P.

    2007-01-01

    The present paper reports the photoluminescence (PL) and the thermoluminescence (TL) characteristics of rice flour. This study is undertaken to consider storage of rice at low temperature and irradiation for disinfection. From the Indian market a few varieties of rice was bought. All the samples of rice was ground using an agate motor and pestle. Thereafter, the powder was sieved to the size of 140 μm using appropriate sieves. When comparing the PL characteristics of the different rice powders studied, it is interesting to note that the PL emission wavelength (around 445 nm) is nearly same for all the rice varieties studied even though the excitation wave length is different. TL characteristics are studied in the temperature range 77-230 K as well as 300-700 K. TL is recorded for the virgin samples and also on irradiation of the same by exposing it to X-ray at 77 K, beta at 300 K and gamma at 77 K. The two varieties are given an X-ray dose of 1 kGy. The TL is recorded for 200 mg rice powder. The TL displayed for the as-received 1 kGy X- ray dose peak is around 160 K with a broad shoulder around 120 K. Basmati variety is given a gamma dose of 12.5 kGy and the TL and TL emission is recorded. It is seen that a well-defined low-temperature TL peak around 119 K and a hump around 145 K are observed in the sample. The TL emission is around 430 nm.The TL peak observed in most of the rice samples above room temperature is around 558 K

  17. Effects of incorporating germinated brown rice on the antioxidant properties of wheat flour chapatti.

    Science.gov (United States)

    Gujral, H Singh; Sharma, P; Bajaj, R; Solah, V

    2012-02-01

    Brown rice after germinating for 24 and 48 h was milled into flour and incorporated in whole wheat flour at a level of 10% to prepare chapattis. The objective was to use chapatti as a delivery vehicle for germinated brown rice. The flour blends and chapattis made from the flour blends were evaluated for their antioxidant properties. Incorporating germinated brown rice flour increased the total phenolic content of the flour blend from 1897 to 2144 µg FAE/g. The total flavonoids content increased significantly from 632.3 to1770.9 µg CAE/g and metal chelating activity significantly increased by 71.62%. Antioxidant activity increased significantly by the addition of brown rice flour and addition of 24- and 48-h germinated brown rice flour further increased the antioxidant activity significantly. The total phenolic content and total flavonoids content decrease significantly in all the blends after baking the flour into chapatti. A decrease of 3% to 29% was observed in the total phenolic content and a decrease of 25% to 42% was observed in the total flavonoids content. However, baking of the flour blends into chapatti increased the reducing power, metal chelating activity by three folds and antioxidant activity from 64% to 104%.

  18. Nanocomposites of rice and banana flours blend with montmorillonite: Partial characterization

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez-Marín, María L.; Bello-Pérez, Luis A. [Centro de Desarrollo de Productos Bióticos, Instituto Politécnico Nacional, Km 6 carr Yautepec-Jojutla, Calle Ceprobi No. 8, Colonia San Isidro, Apartado Postal 24, C.P 62731, Yautepec, Morelos (Mexico); Yee-Madeira, Hernani [Departamento de Física, Escuela Superior de Física y Matemáticas-IPN, Edificio 9, U.P., ‘Adolfo López Mateos’ Col. Lindavista, C.P. 07738, México, D. F. (Mexico); Zhong, Qixin [Department of Food science and Technology, the University of Tennessee, Knoxville (United States); González-Soto, Rosalía A., E-mail: rsoto@ipn.mx [Centro de Desarrollo de Productos Bióticos, Instituto Politécnico Nacional, Km 6 carr Yautepec-Jojutla, Calle Ceprobi No. 8, Colonia San Isidro, Apartado Postal 24, C.P 62731, Yautepec, Morelos (Mexico)

    2013-10-15

    Rice and banana flours are inexpensive starchy materials that can form films with more improved properties than those made with their starch because flour and starch present different hydrophobicity. Montmorillonite (MMT) can be used to further improve the properties of starch-based films, which has not received much research attention for starchy flours. The aim of this work was to evaluate the mechanical and barrier properties of nanocomposite films of banana and rice flours as matrix material with addition of MMT as a nanofiller. MMT was modified using citric acid to produce intercalated structures, as verified by the X-ray diffraction pattern. The intercalated MMT was blended with flour slurries, and films were prepared by casting. Nanocomposite films of banana and rice flours presented an increase in the tensile at break and elongation percentage, respectively, more than their respective control films without MMT. This study showed that banana and rice flours could be alternative raw materials to use in making nanocomposite films. - Highlights: • Flour films presented adequate mechanical and barrier properties. • Addition of montmorillonite modified the mechanical and barrier properties of flour films. • The mechanical properties of the films were influenced by the different components of the flours. • The fiber of the banana flour improved the mechanical properties of the films.

  19. Nanocomposites of rice and banana flours blend with montmorillonite: Partial characterization

    International Nuclear Information System (INIS)

    Rodríguez-Marín, María L.; Bello-Pérez, Luis A.; Yee-Madeira, Hernani; Zhong, Qixin; González-Soto, Rosalía A.

    2013-01-01

    Rice and banana flours are inexpensive starchy materials that can form films with more improved properties than those made with their starch because flour and starch present different hydrophobicity. Montmorillonite (MMT) can be used to further improve the properties of starch-based films, which has not received much research attention for starchy flours. The aim of this work was to evaluate the mechanical and barrier properties of nanocomposite films of banana and rice flours as matrix material with addition of MMT as a nanofiller. MMT was modified using citric acid to produce intercalated structures, as verified by the X-ray diffraction pattern. The intercalated MMT was blended with flour slurries, and films were prepared by casting. Nanocomposite films of banana and rice flours presented an increase in the tensile at break and elongation percentage, respectively, more than their respective control films without MMT. This study showed that banana and rice flours could be alternative raw materials to use in making nanocomposite films. - Highlights: • Flour films presented adequate mechanical and barrier properties. • Addition of montmorillonite modified the mechanical and barrier properties of flour films. • The mechanical properties of the films were influenced by the different components of the flours. • The fiber of the banana flour improved the mechanical properties of the films

  20. The impact of germination on the characteristics of brown rice flour and starch.

    Science.gov (United States)

    Xu, Jie; Zhang, Hui; Guo, Xiaona; Qian, Haifeng

    2012-01-30

    In recent years, germinated brown rice as a functional food has received great attention with its improved sensory and nutritional properties. Particularly of interest are the high levels of γ-amino butyric acid (GABA) which can be obtained during germination. However, more studies are needed to fully understand the effect of germination on the physicochemical properties of brown rice. Germination altered the chemical composition of brown rice, resulting in an increase in reducing sugar and ash content, and a reduction in amylose. Solubility, paste viscosity, transition temperatures (T(o) , T(p) and T(c) ) and percentage of retrogradation (%Retrogradation) were decreased, while swelling power and turbidity were significantly increased. Scanning electron micrographs indicated that starch granules from germinated brown rice became smaller and less homogeneous. Moreover, germination shortened the chain length of amylopectin and amylose molecules. This investigation provides information on changes in the characteristics of rice flour and rice starch during germination, leading to a better understanding on the chemistry of brown rice germination. Copyright © 2011 Society of Chemical Industry.

  1. Elaboration of gluten free cupcakes from xanthosoma flours, taro, rice, cassava and their mixtures

    International Nuclear Information System (INIS)

    Quiros Alpizar, Silvia Maria

    2013-01-01

    The effect of taro flour, xanthosoma, cassava and rice, their possible mixtures and two different percentages of egg protein in cupcakes with total substitution of wheat flour are studied. Flours of xanthosoma and taro were elaborated and have utilized flours of cassava and rice existing in market. The moisture was evaluated and found that taro flour presents a lower water content compared to rice flour, xanthosoma and cassava in all flours. 22 formulations of cupcakes were elaborated using the flours (100% substitutions), flour mixture (substitution 50:50 of each flour) and wheat as control, also the egg content (standard content to egg and lower content to egg), to analyze their sensory characteristics and consumer preferences. The study data was carried out with two independents groups of people, a trained panel that has conducted the descriptive analysis and a consumer group that has made the study of acceptance. An analysis of variance was applied to data, test Fisher LSD and external preference mapping, an analysis of ''cluster '' for proof of acceptance, with witch were identified the three consumer groups, composed by 19, 51, 35 people. All three groups have preferred the control samples with wheat in groups 2 and 3 cupcakes with rice-cassava with content standard and less content of egg, and cassava with less egg, have showed without significant differences in preference (p [es

  2. Reducing retrogradation and lipid oxidation of normal and glutinous rice flours by adding mango peel powder.

    Science.gov (United States)

    Siriamornpun, Sirithon; Tangkhawanit, Ekkarat; Kaewseejan, Niwat

    2016-06-15

    Green and ripe mango peel powders (MPP) were added to normal rice flour (NRF) and glutinous rice flour (GRF) at three levels (400, 800 and 1200 ppm) and their effects on physicochemical properties and lipid oxidation inhibition were investigated. Overall, MPP increased the breakdown viscosity and reduced the final viscosity in rice flours when compared to the control. Decreasing in retrogradation was observed in both NRF and GRF with MPP added of all levels. MPP addition also significantly inhibited the lipid oxidation of all flours during storage (30 days). Retrogradation values were strongly negatively correlated with total phenolic and flavonoid contents, but not with fiber content. The hydrogen bonds and hydrophilic interactions between phenolic compounds with amylopectin molecule may be involved the decrease of starch retrogradation, especially GRF. We suggest that the addition of MPP not only reduced the retrogradation but also inhibited the lipid oxidation of rice flour. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Speciation and monitoring test for inorganic arsenic in white rice flour.

    Science.gov (United States)

    Narukawa, Tomohiro; Hioki, Akiharu; Chiba, Koichi

    2012-02-01

    A monitoring test for arsenic species in white rice flour was developed and applied to flours made from 20 samples of polished rice collected from locations all over Japan. The arsenic species in white rice flour made from five samples each of four types of rice were analyzed by HPLC-ICP-MS after a heat-assisted aqueous extraction. The total arsenic and major and minor element concentrations in the white rice flours were measured by ICP-MS and ICP-OES after microwave-assisted digestion. 91 ± 1% of the arsenic in the flours was extractable. Concentrations of arsenite [As(III)], arsenate [As(V)], and dimethylarsinic acid (DMAA) were closely positively correlated with the total arsenic concentrations. The total arsenic concentration in flours made from rice collected around Japan was 0.15 ± 0.07 mg kg(-1) (highest, 0.32 mg kg(-1)), which is very low. It was thus confirmed that the white rice flour samples collected in this experiment were not suffered from noticeable As contamination.

  4. Physicochemical functionality of 4-α-glucanotransferase-treated rice flour in food application.

    Science.gov (United States)

    Kim, Young-Lim; Mun, Saehun; Park, Kwan-Hwa; Shim, Jae-Yong; Kim, Yong-Ro

    2013-09-01

    The physicochemical properties of 4-α-glucanotransferase (4αGTase)-modified rice flours were examined by measuring the molecular weight distribution, moisture sorption isotherm, and melting enthalpy of ice crystals. The results obtained by measuring the moisture sorption isotherm and melting enthalpy of ice crystals revealed that 4αGTase-modified rice flours had high water binding capacity than that of control rice flour. When the textural properties of noodles containing 4αGTase-treated rice flours after freeze-thaw cycling were measured by texture profile analysis, the textural properties of control noodle deteriorated. However, those of noodle with 4αGTase-modified rice flours were retained. For the melting enthalpy of ice crystals formed within cooked noodles, 4αGTase-treated rice flour showed similar effect to sucrose for reducing the melting enthalpy of ice crystals, however, the texture and taste of noodle with sucrose was undesirable for consuming. 4αGTase-treated rice flour appeared to have good potential as a non-sweet cryoprotectant of frozen product. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. [Development of bakery products for greater adult consumption based on wheat and rice flour].

    Science.gov (United States)

    Reyes Aguilar, María José; Palomo, Patricia de; Bressani, Ricardo

    2004-09-01

    The present investigation was developed as a contribution to Guatemalan's elderly food and nutrition. Its main objective was to evaluate the chemical, nutritional and sensory quality of bread prepared from the partial substitution of wheat flour with rice flour. Wheat flour substitutions with rice flour in the order of 15, 20, 30, 40, 50 and 60% were evaluated. Differences with the control (100% wheat bread) were found during the process of preparation, as well as texture, volume, height, weight and specific volume. Important effects in dough handling were noted specifically in the 40, 50 and 60% rice bread. Thus, a sandy texture was found in breads of higher rice levels. The bread protein quality increased with the level of substitution; however the protein quality difference between the wheat bread and the bread with 60% rice flour did not achieve statistical significance. Based on a statistical analysis of the physical properties the bread with 30 and 40% rice flour was selected, and through a preference test between these last two, the 30% rice flour bread was selected as the sample best suited to the present study's purposes. This bread was not different to wheat bread in many nutritional parameters, although in others it showed to be superior. Each serving size of bread has a weight of 80 grams (2 slices) that contributes adequate quantity of calories, protein and sodium, although a little less dietary fiber than 100% wheat bread.

  6. Decontamination effect of milling by a jet mill on bacteria in rice flour.

    Science.gov (United States)

    Sotome, Itaru; Nei, Daisuke; Tsuda, Masuko; Mohammed, Sharif Hossen; Takenaka, Makiko; Okadome, Hiroshi; Isobe, Seiichiro

    2011-06-01

    The decontamination effect of milling by a jet mill was investigated by counting the number of bacteria in brown and white rice flour with mean particle diameters of 3, 20, and 40µm prepared by the jet mill. In the jet mill, the particles are crushed and reduced in size by the mechanical impact caused by their collision. Although the brown and white rice grains were contaminated with approximately 10(6) and 10(5) CFU/g bacteria, the microbial load of the rice flour decreased as the mean particle diameter decreased, ultimately decreasing to approximately 104 and 103 CFU/g in the brown and white rice flour. The temperature and pressure changes of the sample were not considered to have an effect on reducing the bacterial count during the milling. Hence, it was thought that the rice flour was decontaminated by other effects.

  7. Heat-assisted aqueous extraction of rice flour for arsenic speciation analysis.

    Science.gov (United States)

    Narukawa, Tomohiro; Chiba, Koichi

    2010-07-28

    A versatile heat-assisted pretreatment aqueous extraction method for the analysis of arsenic species in rice was developed. Rice flour certified reference materials NIST SRM1568a and NMIJ CRM 7503-a and a flour made from polished rice were used as samples, and HPLC-ICP-MS was employed for the determination of arsenic species. Arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) were detected in NIST SRM, and As(III), As(V) and DMAA were found in NMIJ CRM and the prepared polished rice flour. The sums of the concentrations of all species in each rice flour sample were 97-102% of the total arsenic concentration in each sample.

  8. The effect of moisture content on physicochemical properties of extruded waxy and non-waxy rice flour.

    Science.gov (United States)

    Jongsutjarittam, Ornpicha; Charoenrein, Sanguansri

    2014-12-19

    The properties of waxy rice flour (WRF) and non-waxy rice flour (RF) were modified using an extrusion process with different feeding material moisture contents. WRF was more affected by the thermomechanical stress from extrusion; consequently, it had a lower glass transition temperature but higher water solubility index (WSI) indicating higher molecular degradation than extruded RF. The lower moisture content of the feeding flour caused more severe flour damage (coarser surface of the extruded flour) and lowered relative crystallinity compared to higher moisture content processing. Moreover, low moisture content processing led to complete gelatinization, whereas, partial gelatinization occurred in the higher moisture content extrusion. Consequently, the extruded flours had a lower peak viscosity and gelatinization enthalpy but a higher water absorption index and WSI than native flour. In conclusion, the rice flour type and the moisture content of the extrusion feeding flour affected the physicochemical properties of the extruded flour. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Effect of fertiliser on functional properties of flour from four rice varieties grown in Sri Lanka.

    Science.gov (United States)

    Gunaratne, Anil; Sirisena, Nihal; Ratnayaka, Upul Kumari; Ratnayaka, Jennet; Kong, Xiangli; Vidhana Arachchi, Lal Peruma; Corke, Harold

    2011-05-01

    Fertiliser is an essential agro-chemical input in modern rice farming. Fertiliser affects the grain quality and yield of rice. Although much research has been carried out to investigate the influence of fertiliser (recommended NPK addition) on yield and quality of rice grain, little is known about the effect of fertiliser on thermal, pasting, gelling and retrogradation properties of rice flour. The aim of this study was to investigate the influence of recommended fertilisation on functional properties of rice flour from four popular high yielding rice varieties grown in Sri Lanka. Fertiliser (recommended NPK addition) increased the protein content but reduced the apparent amylose content in rice flour except in BG 357. Swelling power and amylose leaching were decreased by fertilizer. [corrected] Pasting onset temperature, cold paste viscosity and setback were increased but peak viscosity and granular breakdown decreased. In response to the fertiliser application, gelatinisation peak temperature was reduced in all varieties except BG 300. However, compared to pasting properties, gelatinisation parameters were not much affected by fertilisation. The extent of amylopectin retrogradation was decreased by fertiliser in BG 305 and BG 352 but unchanged in the other two varieties. Except in BG 305, fertiliser reduced the gel hardness of rice flour but increased the gel cohesiveness. It is apparent that the increased protein and reduced amylose content caused by fertiliser affect the functional properties of rice flour. Copyright © 2011 Society of Chemical Industry.

  10. Quality assessment of noodles made from blends of rice flour and canna starch.

    Science.gov (United States)

    Wandee, Yuree; Uttapap, Dudsadee; Puncha-arnon, Santhanee; Puttanlek, Chureerat; Rungsardthong, Vilai; Wetprasit, Nuanchawee

    2015-07-15

    Canna starch and its derivatives (retrograded, retrograded debranched, and cross-linked) were evaluated for their suitability to be used as prebiotic sources in a rice noodle product. Twenty percent of the rice flour was replaced with these tested starches, and the noodles obtained were analyzed for morphology, cooking qualities, textural properties, and capability of producing short-chain fatty acids (SCFAs). Cross-linked canna starch could increase tensile strength and elongation of rice noodles. Total dietary fiber (TDF) content of noodles made from rice flour was 3.0% and increased to 5.1% and 7.3% when rice flour was replaced with retrograded and retrograded debranched starches, respectively. Cooking qualities and textural properties of noodles containing 20% retrograded debranched starch were mostly comparable, while the capability of producing SCFAs and butyric acid was superior to the control rice noodles; the cooked noodle strips also showed fewer tendencies to stick together. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Characterization of bulk and shear properties of basmati and non-basmati rice flour.

    Science.gov (United States)

    Jan, Shumaila; Ghoroi, Chinmay; Saxena, Dharmesh Chandra

    2018-01-01

    Flours are often unstable in relation to their flow performance, which is evident when a free-flowing material ceases to flow and the processing, handling, and production parameters depend on the inherent powder characteristics and their bulk behaviour. The present study was conducted to compare the flowability of basmati and non-basmati rice flour affecting bulk handling, which could be related to its particle size, shape and surface roughness (measured by atomic force microscopy) as well as bulk and shear properties, depending upon the processing conditions. Particle size (171.1-171.9 μm) of both samples was not significantly different. However, the flowability of the non-basmati rice flour was significantly affected by its particle shape (circularity 0.487), surface roughness (124.23 nm) and compressibility (25.32%) in comparison to basmati rice flour (circularity 0.653, surface roughness 113.59 nm and compressibility 21.09%), making it more cohesive than basmati rice flour. Also, basic flow energy was significantly higher in non-basmati flour, thus requiring more energy (147.54 mJ) to flow than basmati rice flour (130.15 mJ). Overall, flowability was analysed by applying three different pressures (3, 6 and 9 kPa), among which non-basmati rice flour was found to be less flowable (flow function coefficient (FFC) 2.33 at 9 kPa) in comparison to basmati (FFC 3.35 at 9 kPa), making bulk handling difficult. This study could be useful in designing processing equipment, hoppers and silos for rice flour handling. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  12. Porous rice powder from precipitation of gelatinized flour or starch paste with ethanol

    Science.gov (United States)

    Hot paste obtained by autoclaving (130oC, 20 psi, 20-30 min) a 5-7% (w/w) rice flour or starch slurry, was precipitated with ethanol (three extractions) to produce a dry, porous, pregelatinized powder with an average particle size of 75.0µm (flour-derived powder), and 41.6µm (starch-derived powder)....

  13. Influence of physicochemical properties of rice flour on oil uptake of tempura frying batter.

    Science.gov (United States)

    Nakamura, Sumiko; Ohtsubo, Ken'ichi

    2010-01-01

    The physicochemical properties of rice flour and wheat flour influenced the oil uptake of tempura frying batter. Rice flour was better than wheat flour in the overall quality and crispness of the fried tempura batter. Rice flour resisted oil absorption more than wheat flour, and a higher level of apparent starch amylose and higher consistency/breakdown ratio of the pasting properties led to a lower oil uptake of the batter. Super hard EM10 rice showed the highest apparent amylose content and higher consistency/breakdown ratio than the other flour samples, the batter from EM10 revealing the lowest oil content after frying among all the batters examined. The apparent amylose content, consistency/breakdown ratio and oil absorption index are proposed as useful guides for oil absorption when frying from among the physicochemical properties that influence the oil content of fried batter. Our proposal for the "oil absorption index" could be a simple, although not perfect method for estimating the oil content of batter flour.

  14. Porous rice powder from the precipitation of gelatinized flour or starch paste with ethanol

    Science.gov (United States)

    Hot paste obtained by autoclaving (130oC, 20 psi, 20-30 min) a 5-7% (w/w) rice flour or starch slurry was precipitated with ethanol (three extractions) to produce a dry, porous, pregelatinized powder with an average particle size of 75.0µm (flour-derived powder), and 41.6µm (starch-derived powder). ...

  15. Milling of rice grains: effects of starch/flour structures on gelatinization and pasting properties.

    Science.gov (United States)

    Hasjim, Jovin; Li, Enpeng; Dhital, Sushil

    2013-01-30

    Starch gelatinization and flour pasting properties were determined and correlated with four different levels of starch structures in rice flour, i.e. flour particle size, degree of damaged starch granules, whole molecular size, and molecular branching structure. Onset starch-gelatinization temperatures were not significantly different among all flour samples, but peak and conclusion starch-gelatinization temperatures were significantly different and were strongly correlated with the flour particle size, indicating that rice flour with larger particle size has a greater barrier for heat transfer. There were slight differences in the enthalpy of starch gelatinization, which are likely associated with the disruption of crystalline structure in starch granules by the milling processes. Flours with volume-median diameter ≥56 μm did not show a defined peak viscosity in the RVA viscogram, possibly due to the presence of native protein and/or cell-wall structure stabilizing the swollen starch granules against the rupture caused by shear during heating. Furthermore, RVA final viscosity of flour was strongly correlated with the degree of damage to starch granules, suggesting the contribution of granular structure, possibly in swollen form. The results from this study allow the improvement in the manufacture and the selection criteria of rice flour with desirable gelatinization and pasting properties. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Effect of endogenous proteins and lipids on starch digestibility in rice flour.

    Science.gov (United States)

    Ye, Jiangping; Hu, Xiuting; Luo, Shunjing; McClements, David Julian; Liang, Lu; Liu, Chengmei

    2018-04-01

    The composition and structure of the food matrix can have a major impact on the digestion. The aim of this work was to investigate the effects of endogenous proteins and lipids on starch digestibility in rice flour, with an emphasis on establishing the underlying physicochemical mechanisms involved. Native long-grain indica rice flour and rice flour with the lipids and/or proteins removed were subjected to a simulated digestion in vitro. A significant increase in starch digestibility was observed after removal of proteins, lipids, or both. The starch digestibility of the rice flour without lipids was slightly lower than that without proteins, even though the proteins content was about 10-fold higher than the lipids content. Microstructural analysis suggested that the proteins and lipids were normally attached to the surfaces of the starch granules in the native rice flour, thus inhibiting their contact with digestive enzymes. Moreover, the proteins and lipids restricted the swelling of the starch granules, which may have decreased their digestion by reducing their surface areas. In addition, amylose-lipid complex was detected in the rice flour, which is also known to slow down starch digestion. These results have important implications for the design of foods with improved nutritional profiles. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Nanocomposites of rice and banana flours blend with montmorillonite: partial characterization.

    Science.gov (United States)

    Rodríguez-Marín, María L; Bello-Pérez, Luis A; Yee-Madeira, Hernani; Zhong, Qixin; González-Soto, Rosalía A

    2013-10-01

    Rice and banana flours are inexpensive starchy materials that can form films with more improved properties than those made with their starch because flour and starch present different hydrophobicity. Montmorillonite (MMT) can be used to further improve the properties of starch-based films, which has not received much research attention for starchy flours. The aim of this work was to evaluate the mechanical and barrier properties of nanocomposite films of banana and rice flours as matrix material with addition of MMT as a nanofiller. MMT was modified using citric acid to produce intercalated structures, as verified by the X-ray diffraction pattern. The intercalated MMT was blended with flour slurries, and films were prepared by casting. Nanocomposite films of banana and rice flours presented an increase in the tensile at break and elongation percentage, respectively, more than their respective control films without MMT. This study showed that banana and rice flours could be alternative raw materials to use in making nanocomposite films. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Tailoring rice flour structure by rubbery milling for improved gluten-free baked goods.

    Science.gov (United States)

    Brütsch, Linda; Tribolet, Liliane; Isabettini, Stéphane; Soltermann, Patrick; Baumann, Andreas; Windhab, Erich J

    2018-05-10

    Ever-growing demand for gluten-free products calls for the development of novel food processing techniques to widen the range of existing baked goods. Extensive research has been targeted towards recipe optimization, widely neglecting the tailoring potential of process-induced structuring of gluten-free raw materials. Herein, we address this shortcoming by demonstrating the potential of rubbery milling for the generation of structure and techno-functionality in breads obtained from a variety of rice flour types. Moisture and temperature induced state transitions during milling were exploited to tailor the physicochemical properties of the flour. Moisture addition during conditioning of the different rice varieties and milling in the rubbery state considerably decreased starch damage due to more gentle disintegration. The degree of starch damage dictated the water absorption capacity of the rice flour types. Flour types with reduced starch damage upon milling offered lower dough densities, yielding bread loafs with a higher volume and better appearance. The choice of rice variety enables fine-tuning of the final product quality by influencing the dough viscoelasticity, which defines the final loaf volume. Whole grain rice flour dramatically increased the loaf volume, whilst simultaneously offering nutritional benefits. Combining the proposed functionalised flour types with current and future advances in product recipes paves the way towards optimised gluten-free goods.

  19. Particle size distribution of rice flour affecting the starch enzymatic hydrolysis and hydration properties.

    Science.gov (United States)

    de la Hera, Esther; Gomez, Manuel; Rosell, Cristina M

    2013-10-15

    Rice flour is becoming very attractive as raw material, but there is lack of information about the influence of particle size on its functional properties and starch digestibility. This study evaluates the degree of dependence of the rice flour functional properties, mainly derived from starch behavior, with the particle size distribution. Hydration properties of flours and gels and starch enzymatic hydrolysis of individual fractions were assessed. Particle size heterogeneity on rice flour significantly affected functional properties and starch features, at room temperature and also after gelatinization; and the extent of that effect was grain type dependent. Particle size heterogeneity on rice flour induces different pattern in starch enzymatic hydrolysis, with the long grain having slower hydrolysis as indicated the rate constant (k). No correlation between starch digestibility and hydration properties or the protein content was observed. It seems that in intact granules interactions with other grain components must be taken into account. Overall, particle size fractionation of rice flour might be advisable for selecting specific physico-chemical properties. Copyright © 2013. Published by Elsevier Ltd.

  20. Germination conditions affect selected quality of composite wheat-germinated brown rice flour and bread formulations.

    Science.gov (United States)

    Charoenthaikij, Phantipha; Jangchud, Kamolwan; Jangchud, Anuvat; Prinyawiwatkul, Witoon; Tungtrakul, Patcharee

    2010-08-01

    Brown rice has been reported to be more nutritious after germination. Germinated brown rice flours (GBRFs) from different steeping conditions (in distilled water [DI, pH 6.8] or in a buffer solution [pH 3] for either 24 or 48 h at 35 degrees C) were evaluated in this study. GBRF obtained from brown rice steeped at pH 3 for 48 h contained the highest amount of free gamma aminobutyric acid (GABA; 67 mg/100 g flour). The composite flour (wheat-GBRF) at a ratio of 70 : 30 exhibited significantly lower peak viscosity (PV) (56.99 - 132.45 RVU) with higher alpha-amylase activity (SN = 696 - 1826) compared with those of wheat flour (control) (PV = 136.46 RVU and SN = 1976). Bread formulations, containing 30% GBRF, had lower loaf volume and greater hardness (P rice flour (BRF). Acceptability scores for aroma, taste, and flavor of breads prepared with or without GBRFs (30% substitution) were not significantly different, with the mean score ranging from 6.1 (like slightly) to 7 (like moderately). Among the bread formulations containing GBRF, the one with GBRF prepared after 24 h steeping at pH 3 had a slightly higher (though not significant) overall liking score (6.8). This study demonstrated that it is feasible to substitute wheat flour with up to 30% GBRF in bread formulation without negatively affecting sensory acceptance. Practical Application: Our previous study revealed that flours from germinated brown rice have better nutritional properties, particularly gamma-aminobutyric acid (GABA), than the nongerminated one. This study demonstrated feasibility of incorporating up to 30% germinated brown rice flour in a wheat bread formulation without negatively affecting sensory acceptance. In the current United States market, this type of bread may be sold as frozen bread which would have a longer shelf life. Further study is thus needed.

  1. Physicochemical Characteristics of Artificial Rice from Composite Flour: Modified Cassava Starch, Canavalia ensiformis and Dioscorea esculenta

    Science.gov (United States)

    Sumardiono, Siswo; Pudjihastuti, Isti; Handayani, Noer Abyor; Kusumayanti, Heny

    2018-02-01

    Indonesia is the third largest country on the global paddy rice production and also considered as a rice importer. Even, Indonesia has the biggest per capita consumption of paddy rice (140 kg of paddy rice per person per year). Product diversification using local commodities. Artificial rice is potential to be developed as a new value product using different types of grains. It is one of appropriate solutions for reducing imported rice rate. Artificial rice was produced using high nutrition composite flours (modified cassava starch, corn, Canavalian ensiformis, and Dioscorea esculenta). This study consists of three main stages, preparation of composite flour, formulation, and artificial rice production using hot extruder capacity 10 kg/day. The objectives of this studies were to investigate some formulation in compare with commercial paddy rice. Artificial rice has been successfully conducted using prototype of hot extruder with the temperature 95°C. Physical analyses (color and water absorption) were carried out to artificial rice product and commercial paddy rice. Chemical analyses (nutrition and amylose content) of product will be also presented in this study. The best formulation of artificial rice was achieved in 80% modified cassava starch, 10% Canavalian ensiformis, and 10% Dioscorea esculenta, respectively.

  2. Physicochemical Characteristics of Artificial Rice from Composite Flour: Modified Cassava Starch, Canavalia ensiformis and Dioscorea esculenta

    Directory of Open Access Journals (Sweden)

    Sumardiono Siswo

    2018-01-01

    Full Text Available Indonesia is the third largest country on the global paddy rice production and also considered as a rice importer. Even, Indonesia has the biggest per capita consumption of paddy rice (140 kg of paddy rice per person per year. Product diversification using local commodities. Artificial rice is potential to be developed as a new value product using different types of grains. It is one of appropriate solutions for reducing imported rice rate. Artificial rice was produced using high nutrition composite flours (modified cassava starch, corn, Canavalian ensiformis, and Dioscorea esculenta. This study consists of three main stages, preparation of composite flour, formulation, and artificial rice production using hot extruder capacity 10 kg/day. The objectives of this studies were to investigate some formulation in compare with commercial paddy rice. Artificial rice has been successfully conducted using prototype of hot extruder with the temperature 95°C. Physical analyses (color and water absorption were carried out to artificial rice product and commercial paddy rice. Chemical analyses (nutrition and amylose content of product will be also presented in this study. The best formulation of artificial rice was achieved in 80% modified cassava starch, 10% Canavalian ensiformis, and 10% Dioscorea esculenta, respectively.

  3. Extraction of fumonisins B1 and B2 from white rice flour and their stability in white rice flour, cornstarch, cornmeal, and glucose.

    Science.gov (United States)

    Kim, Eun-Kyung; Scott, Peter M; Lau, Ben P-Y; Lewis, David A

    2002-06-05

    To extract fumonisin B1 (FB1) and fumonisin B2 (FB2) from Thai white rice flour, different solvent mixtures, temperatures, pH values, and addition of enzymes or ethylenediaminetetraacetic acid disodium salt (Na2EDTA) were examined. Three extractions with 0.1 M Na2EDTA achieved the highest recoveries. Initial recoveries of fumonisins added to white rice flour, cornstarch, cornmeal, and glucose varied with commodity. Fumonisins disappeared in Thai white rice flour after 12 h, but 55% remained in another white rice flour. With cornstarch 20-30% fumonisins remained after 24 h; only 43% of 14C-labeled FB1 materials extracted from cornstarch was eluted with methanol from an immunoaffinity column. Fumonisins were stable in cornmeal for 24 h but only approximately 50% remained after 30 days. With glucose, 25% of FB1 and FB2 remained 24 h after addition; N-(1-deoxy-D-fructos-1-yl)FB(1) andN-(carboxymethyl)FB(1) were detected in lower amounts than residual FB(1) after 3 months.

  4. Effect of waxy rice flour and cassava starch on freeze-thaw stability of rice starch gels.

    Science.gov (United States)

    Charoenrein, Sanguansri; Preechathammawong, Nutsuda

    2012-10-01

    Repeatedly frozen and thawed rice starch gel affects quality. This study investigated how incorporating waxy rice flour (WF) and cassava starch (CS) in rice starch gel affects factors used to measure quality. When rice starch gels containing 0-2% WF and CS were subjected to 5 freeze-thaw cycles, both WF and CS reduced the syneresis in first few cycles. However CS was more effective in reducing syneresis than WF. The different composite arrangement of rice starch with WF or CS caused different mechanisms associated with the rice starch gel retardation of retrogradation, reduced the spongy structure and lowered syneresis. Both swollen granules of rice starch and CS caused an increase in the hardness of the unfrozen and freeze-thawed starch gel while highly swollen WF granules caused softer gels. These results suggested that WF and CS were effective in preserving quality in frozen rice starch based products. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Super-fine rice-flour production by enzymatic treatment with high hydrostatic pressure processing

    Science.gov (United States)

    Kido, Miyuki; Kobayashi, Kaneto; Chino, Shuji; Nishiwaki, Toshikazu; Homma, Noriyuki; Hayashi, Mayumi; Yamamoto, Kazutaka; Shigematsu, Toru

    2013-06-01

    In response to the recent expansion of rice-flour use, we established a new rice-flour manufacturing process through the application of high hydrostatic pressure (HP) to the enzyme-treated milling method. HP improved both the activity of pectinase, which is used in the enzyme-treated milling method and the water absorption capacity of rice grains. These results indicate improved damage to the tissue structures of rice grains. In contrast, HP suppressed the increase in glucose, which may have led to less starch damage. The manufacturing process was optimized to HP treatment at 200 MPa (40°C) for 1 h and subsequent wet-pulverization at 11,000 rpm. Using this process, rice flour with an exclusively fine mean particle size less than 20 μm and starch damage less than 5% was obtained from rice grains soaked in an enzyme solution and distilled water. This super-fine rice flour is suitable for bread, pasta, noodles and Western-style sweets.

  6. Cultivar difference in physicochemical properties of starches and flours from temperate rice of Indian Himalayas.

    Science.gov (United States)

    Mir, Shabir Ahmad; Bosco, Sowriappan John Don

    2014-08-15

    Starch and flour of seven temperate rice cultivars grown in Himalayan region were evaluated for composition, granule structure, crystallinity, Raman spectrometry, turbidity, swelling power, solubility, pasting properties and textural properties. The rice cultivars showed medium to high amylose content for starch (24.69-32.76%) and flour (17.78-24.86%). SKAU-382 showed the highest amount of amylose (32.76%). Rice starch showed polyhedral granule shapes and differences in their mean granule size (2.3-6.5 μm) were noted among the samples. The starch and flour samples showed type A-pattern with strong reflection at 15, 18, and 23. Pasting profile and textural analysis of rice starch and flour showed that all the cultivars differences, probably due to variation in amylose content. The present study can be used for identifying differences between rice genotypes for starch and flour quality and could provide guidance to possible industries for their end use. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Order of 4 November 1988 on treatment by ionizing radiation of rice flour and its products obtained by turbo-separation

    International Nuclear Information System (INIS)

    1988-01-01

    This Order fixes the conditions for the sale of rice flour and products obtained from its turbo-separation whose microbial decontamination was obtained through exposure to cobalt 60 or cesium 137 gamma-rays or accelerated electron beams with an energy below or equal to 10 Mev. (NEA) [fr

  8. Physical Characteristics of White Sweet Potato (Ipomoea batatas L.), Rice (Oryza sativa L.), and Tapioca (Manihot esculenta) Flours - Based Seasoning Composite Flour

    Science.gov (United States)

    Alfani, NNA; Ishartani, D.; Anam, C.; Praseptiangga, D.; Manuhara, G. J.

    2017-04-01

    The objective of this study was to determine the physical characteristics of seasoning composite flour that made from white sweet potato, rice, and tapioca flours, and determined the best formula of seasoning composite flour. A completely randomized design (CRD) with formula as the single factor was used. The data were analyzed by one-way ANOVA method and followed by Duncan Multiple Range Test (DMRT) at significance 5% if there was a significant difference. The best formula of seasoning composite flour was 30% tapioca flour, 30% rice flour, and 40% white sweet potato flour. The physical characteristics of the best formula were 5.689 ml/g of swelling power, 2.681 g/g of water absorption capacity, 0.887 ml/g of oil absorption capacity, and 22.03% cooking loss. Physical characteristics of the best seasoning composite flour were significantly different from the commercial seasoning flour and showed a better cooking loss, oil absorption capacity, and swelling power than commercial seasoning flour.

  9. Physical-chemical characterization of pre-cooked mixed rice flour and barley bagasse

    Directory of Open Access Journals (Sweden)

    Diego Palmiro Ramirez Ascheri

    2016-04-01

    Full Text Available The extrusion processing parameters, chemical composition and water content of the flour mixture may affect the structure of rice flour, leading to products with different rheological behavior and hygroscopicity. Therefore, this work aimed to study the rheological properties and water adsorption of mixed flours of broken rice and barley bagasse obtained by extrusion cooking. Samples were prepared from a mixture of grits/bagasse between 82/18 and 73/27 (w/w with water content between 18.04 and 26.96%, using a single screw extruder. The rheological properties of the extruded flour were determined by a rapid viscosity analyzer to evaluate the cooking profile of the pastes by observing the pasting temperature, maximum viscosity, breakdown and retrogradation. The adsorption process was performed by weighing the samples stored at temperatures of 25, 30, 35 and 45 °C with water activity between 0.112 and 0.973. The isotherms were fitted using the following mathematical models: Halsey, Oswin, Smith, GAB and Peleg. The extruded composite flours were characterized by their lack of initial viscosity. The pasting temperature (40-67 °C, maximum viscosity (690-1146 cP, breakdown viscosity (0-175 cP and retrogradation (613-1382 cP were lower than for raw rice flour. The Peleg equation fitted well to the water adsorption data and can be used to represent the sigmoidal type II shape of the water adsorption isotherms for the extruded mixed flours from rice grits and barley bagasse.

  10. Influence of moisture content and temperature on thermal conductivity and thermal diffusivity of rice flours

    Science.gov (United States)

    The thermal conductivity and thermal diffusivity of four types of rice flours and one type of rice protein were determine at temperatures ranging from 4.8 to 36.8 C, bulk densities 535 to 875.8 kg/m3, and moisture contents 2.6 to 16.7 percent (w.b.), using a KD2 Thermal Properties Analyzer. It was ...

  11. Effects of Dry-Milling and Wet-Milling on Chemical, Physical and Gelatinization Properties of Rice Flour

    Directory of Open Access Journals (Sweden)

    Jitranut Leewatchararongjaroen

    2016-09-01

    Full Text Available Rice flour from nine varieties, subjected to dry- and wet-milling processes, was determined for its physical and chemical properties. The results revealed that milling method had an effect on properties of flour. Wet-milling process resulted in flour with significantly lower protein and ash contents and higher carbohydrate content. Wet-milled flour also tended to have lower lipid content and higher amylose content. In addition, wet-milled rice flour contained granules with smaller average size compared to dry-milled samples. Swelling power at 90 °C of wet-milled samples was higher while solubility was significantly lower than those of dry-milled flour. Dry milling process caused the destruction of the crystalline structure and yielded flour with lower crystallinity compared to wet-milling process, which resulted in significantly lower gelatinization enthalpy.

  12. Effects of Different Grinding Methods on Morphological, Textural Properties and Pasting Profiles of MR220 Rice Flour

    International Nuclear Information System (INIS)

    Noorlaila Ahmad; Asmeda Rajab; Norziah Mohd Hani

    2016-01-01

    Three different grinding techniques (dry, semi-wet, and wet) were employed in rice flour production. Investigation on the effects of the grinding techniques on starch damage percentage, particle size distribution, pasting profiles, morphological and textural properties of rice flours produced were evaluated. Wet grinding resulted in significantly (p<0.05) has lower percentage of damaged starch (3.24 %) than other grinding methods. Morphological studies (microscopy and particle size analysis) have reflected significant differences among rice flours granule shapes. The granules displaying different shapes of polygonal, round and angular forms, with some as an individual granule while others tend to attached together. Wet grinding technique also yielded flour that exhibit significantly (p<0.05) with higher gel hardness (16.62 g). Pasting profiles showed that pasting temperature for rice flour produce using these three grinding methods varied between 80.15 - 80.42 degree Celcius. Results revealed that the three grinding techniques clearly affected the physicochemical properties of rice flour. The results from this study play an important role in the selection criteria of rice flour with desirable pasting and textural properties for manufacturing rice-based product. (author)

  13. Flour mixture of rice flour, corn and cassava starch in the production of gluten-free white bread

    Directory of Open Access Journals (Sweden)

    Ana Cristina Ballesteros López

    2004-03-01

    Full Text Available The use of rice flour corn and cassava starch was evaluated in several formulations aiming to find a flour mixture to replace wheat flour in the production of free-gluten white bread. Production parameters were evaluated through sensory analysis. The resulting breads were evaluated taking into account physical parameters (crumb appearance, specific volume and moisture and sensorial parameters (flavor, appearance, crumb texture, crust color and satisfaction. Regarding flavor and moisture, breads prepared with the three different ingredients were not statistically different at 5% probability by the Tuckey test. However, they differed significantly regarding the specific volume, crumb texture, crust color, degree of satisfaction and external appearance. Rice flour bread presented the best parameters, being preferred by the sensory evaluation panel, followed by corn starch bread and cassava starch bread. Breads prepared with rice flour resulted in a softer product, presenting a better consistency with small alveoli homogeneously distributed. As far as crumb texture was concerned, corn starch bread presented larger alveoli, while cassava starch resulted in bread with expandable and gummy crumb, with granulation without alveoli, and undesirable sensorial characteristics. Production parameters were established based on these results and a mixture of flours, composed by 45% rice flour, 35% corn starch and 20% cassava starch presented good results originating bread with crumb formed by uniform and well distributed cells, and pleasant flavor and appearance.Para desenvolver um sucedâneo para o pão de forma, isento de glúten, foram testadas as influências dos amidos de milho, de mandioca e da farinha de arroz, bem como das etapas de mistura, fermentação e assamento na qualidade do mesmo. Os parâmetros de fabricação foram determinados por meio de análises sensoriais durante a produção. As características sensoriais dos pães foram comparadas por

  14. Influence of waxy rice flour substitution for wheat flour on characteristics of batter and freeze-thawed cake.

    Science.gov (United States)

    Jongsutjarittam, Nisachon; Charoenrein, Sanguansri

    2013-09-12

    This study aimed to improve the freeze-thawed cake properties by10-20% waxy rice flour (WRF) substitution for wheat flour (WF). Viscosity of WRF-substituted batters was lower; consequently, trapped air was less uniformly distributed than WF batter. After five freeze-thaw cycles, firmness and enthalpy of melting retrograded amylopectin of WF- and WRF-substituted cakes increased and the matrix surrounding the air pores from SEM images was denser than in fresh-baked cakes. Sensory evaluation showed an increase in firmness and a decrease in firmness acceptability of freeze-thawed cakes. However, freeze-thawed cake with WRF substitution had significantly less firmness, less dense matrix and more acceptability than WF cake. This could have been due to a low amylose content of WRF and the spread of ruptured waxy rice starch granules around swollen wheat starch granules as observed by CLSM. Thus, WRF could be used for WF substitution to improve the firmness in freeze-thawed cake. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Comparative studies on flour proximate compositions and functional properties of selected Pakistani rice varieties

    International Nuclear Information System (INIS)

    Jamal, S.; Qazi, I.M.; Ahmed, I.

    2016-01-01

    The aim of this study was to evaluate the proximate and functional properties of flours obtained from various rice varieties, i.e., Super Basmati Shaheen, Super Basmati Kainat, Super Fine, JP5, Basmati 385, Fakhr-e-Malakand grown in different areas of Pakistan. Moisture content, ash content, crude protein, crude fat, water absorption index, water solubility and swelling power varied significantly (P<0.05) from each other. Moisture content, ash content, crude protein and crude fat of rice flour ranged from 5.46-7.08 percentage, 0.48-1.23 percentage, 8.02-9.85 percentage and 0.43-1.5 percentage, respectively. While, functional properties such as water absorption index, water solubility index and swelling power were found in the range of 5.38-6.26 (g/g), 1.95-4.94 percentage and 5.74-7.64 (g/g), respectively. The results showed that the functional properties of rice flour were greatly influenced by the compositional variations of various rice varieties. (author)

  16. Iron bioavailability in Wistar rats fed with fortified rice by Ultra Rice technology with or without addition of yacon flour (Smallanthus sonchifolius).

    Science.gov (United States)

    Della Lucia, Ceres M; Vaz Tostes, Maria das Graças; Silveira, Carlos Mário M; Bordalo, Lívia A; Rodrigues, Fabiana C; Pinheiro-Sant'Ana, Helena Maria; Martino, Hércia S D; Costa, Neuza Maria B

    2013-03-01

    This study aimed to evaluate iron (Fe) bioavailability in Wistar rats fed with rice fortified with micronized ferric pyrophosphate (FP) by Ultra Rice (UR) technology with or without addition of yacon flour as a source of 7.5% of fructooligosaccharides (FOS). Diets were supplied with 12 mg iron/kg from the following sources: ferrous sulfate (FS - control diet), fortified rice with micronized ferric pyrophosphate (Ultra Rice) (UR diet), ferrous sulfate + yacon flour (FS + Y diet) or Ultra Rice + yacon flour (UR + Y diet). Blood samples were collected at the end of depletion and repletion stages for determination of hemoglobin concentration and calculation of the relative biological value (RBV). Also, the content of short chain fatty acids (SCFA) (acetic, propionic and butyric acids) from animals' stools and caecum weight were determined. The UR diet showed high iron bioavailability (RBV = 84.7%). However, the addition of yacon flour in the diet containing fortified rice (UR + Y diet) decreased RBV (63.1%) significantly below the other three groups (p flour showed higher acetic acid values compared to those who did not. In conclusion, fortified UR with micronized ferric pyrophosphate showed high iron bioavailability but the addition of yacon flour at 7.5% FOS reduced iron bioavailability despite increased caecum weight and SCFA concentration.

  17. Effects of different heat-moisture treatments on the physicochemical properties of brown rice flour.

    Science.gov (United States)

    Nakamura, Sumiko; Okumura, Hisako; Sugawara, Masayoshi; Noro, Wataru; Homma, Noriyuki; Ohtsubo, Ken'ichi

    2017-12-01

    We evaluated the effect of heat-moisture treatment (HMT) on the main chemical components, physical properties, and enzyme activities of two types of brown rice flour: high-amylose Koshinokaori and normal-quality Koshiibuki. Five different HMTs using brown rice (moisture content was 12.0%) were assessed: 0.1 MPa/120 °C for 5 or 10 min, 0.2 MPa/134 °C for 5 or 10 min and 0.3 MPa/144 °C for 10 min. HMT, decreased the α-amylase and lipase activities, and fat acidity, and slightly increased the dietary fiber and resistant starch levels. After 2 months' storage at 35 °C, rice samples that were treated with 0.2 MPa/134 °C or 0.3 MPa/144 °C for 10 min had a lower fat acidity than untreated samples, which would be useful for long-term storage and export of rice flour. And HMT exhibited inhibition of retrogradation in the pasting and physical properties, which is profitable to promote the qualities of the rice products.

  18. Sorption Isotherm Modelling Of Fermented Cassava Flour by Red Yeast Rice

    Science.gov (United States)

    Cahyanti, M. N.; Alfiah, M. N.; Hartini, S.

    2018-04-01

    The objective of the study is to determine the characteristic of moisture sorption isotherm from fermented cassava flour by red yeast rice using various modeling. This research used seven salt solutions and storage temperature of 298K, 303K, and 308K. The models used were Brunauer-Emmet-Teller (BET), Guggenheim-Anderson-de Boer (GAB) and Caurie model. The monolayer moisture content was around 4.51 – 5.99% db. Constant related to absorption heat in the multilayer area of [GAB model was around 0.86-0,91. Constant related to absorption heat in the monolayer area of GAB model was around 4.67-5.97. Constant related to absorption heat in the monolayer area of BET model was around 4.83-7.04. Caurie constant was around 1.25-1.59. The equilibrium and monolayer moisture content on fermented cassava flour by red yeast rice was decreasing as increasing temperature. GAB constant value indicated that the process of moisture absorption on the fermented cassava flour by red yeast rice categorized in type II.

  19. Utilization of sorghum, rice, corn flours with potato starch for the preparation of gluten-free pasta.

    Science.gov (United States)

    Ferreira, Sila Mary Rodrigues; de Mello, Ana Paula; de Caldas Rosa dos Anjos, Mônica; Krüger, Cláudia Carneiro Hecke; Azoubel, Patrícia Moreira; de Oliveira Alves, Márcia Aurelina

    2016-01-15

    The aim of this study was to evaluate the use of mixture of sorghum-rice-corn flour and potato starch in the development of gluten-free pasta for celiac disease patients. The experiment was designed according to simplex-lattice method and different types of gluten-free flours were used, such as sorghum, rice, corn, and potato starch. The fifteen formulations were subjected to sensory analysis (Mixed Structured Scale - MSS) and seven formulations were selected in respect to taste and grittiness. These formulations were subjected to Quantitative Descriptive Analysis (QDA), which evaluated the attributes: appearance, color, odor, hardness, elasticity, stickiness, grittiness, taste, residual bitterness and overall quality. Results showed significant difference in appearance, color and hardness. The formulations that showed the best sensory results were submitted to chemical analysis and cooking quality of pasta. It was observed that the best results for mixing is sorghum flour, rice flour and potato starch. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Development and quality evaluation of hypoallergic complementary foods from rice incorporated with sprouted green gram flour

    Directory of Open Access Journals (Sweden)

    Rafiya Bazaz

    2016-12-01

    Full Text Available Rice flour and green gram flour (sprouted as well as unsprouted were blended in different proportions with apple pulp, sugar, milk and water for formulation of 12 hypoallergic diets. The formulations were studied for physico-chemical properties, antinutrient content (phytate and oxalate and in vitro protein digestibility. Blending and sprouting significantly affected all the studied parameters. Sprouting significantly (p ≤ 0.05 improved protein content and in vitro protein digestibility, while carbohydrate content and antinutrients decreased significantly. Nutrition profile of water-based diets met RDA guidelines only after addition of sprouted green gram flour and were comparable to control (commercial weaning food. Water-based formulation showed lower sensory score than milk-based diets; however, addition of sprouted green gram flour significantly (p ≤ 0.05 improved their overall acceptability. It could be concluded that by incorporating sprouted green gram flour, milk could be replaced with water for production of hypoallergic weaning foods without affecting the nutritional and sensory attributes of formulations and thereby making the production more economical, especially for underdeveloped countries.

  1. Comparative Study of the Phytoprostane and Phytofuran Content of indica and japonica Rice (Oryza sativa L.) Flours.

    Science.gov (United States)

    Pinciroli, M; Domínguez-Perles, R; Abellán, A; Guy, A; Durand, T; Oger, C; Galano, J M; Ferreres, F; Gil-Izquierdo, A

    2017-10-11

    Phytoprostanes and phytofurans (PhytoPs and PhytoFs, respectively) are nonenzymatic lipid peroxidation products derived from α-linolenic acid (C18:3 n-3), considered biomarkers of oxidative degradation in plant foods. The present work profiled these compounds in white and brown grain flours and rice bran from 14 rice cultivars of the subspecies indica and japonica by ultrahigh performance liquid chromatography coupled to electrospray ionization and triple quadrupole mass spectrometry. For PhytoPs, the average concentrations were higher in rice bran (0.01-9.35 ng g -1 ) than in white and brown grain flours (0.01-1.17 ng g -1 ). In addition, the evaluation of rice flours for the occurrence PhytoFs evidenced average values 1.77, 4.22, and 10.30 ng g -1 dw in rice bran, brown grain flour, and white grain flour, respectively. A significant correlation was observed between total and individual compounds. The concentrations retrieved suggest rice bran as a valuable source of PhytoPs and PhytoFs that should be considered in further studies on bioavailability and bioactivity of such compounds.

  2. Fermentation of Prefermented and Extruded Rice Flour by Lactic Acid Bacteria from Sikhae

    DEFF Research Database (Denmark)

    Lee, C. H.; Min, K. C.; Souane, M.

    1992-01-01

    of prefermentation of rice flour in solid-state with Bacillus laevolacticus and Saccharomyces cerevisiae, extrusion cooking and addition of soymilk as the substrate of lactic acid fermentation were tested. Extrusion cooking and prefermentation of rice increased the soluble solid and sugar contents before malt......The acid- and flavor-forming properties of Lactobacillus plantarum and Leuconostoc mesenteroides isolated from Sikhae, a Korean traditional lactic acid fermented fish product, were examined and compared to those of Lactobacillus casei and Lactococcus lactis subsp. diacetylactis DRC3. The effects...... digestion. The amount of sugar consumption during lactic fermentation varied with the type of bacteria. Leuconostoc mesenteroides(sikhae) and Lactobacillus plantarum(sikhae) increased up to 6 times of original cell number by 24 hrs of fermentation in rice + soymilk substrate, but Lactococcus lactis...

  3. Effect of gluten, egg and soy proteins on the rheological and thermo-mechanical properties of wholegrain rice flour.

    Science.gov (United States)

    Pătraşcu, Livia; Banu, Iuliana; Vasilean, Ina; Aprodu, Iuliana

    2017-03-01

    The effect of protein addition on the rheological, thermo-mechanical and baking properties of wholegrain rice flour was investigated. Gluten, powdered eggs and soy protein concentrate were first analyzed in terms of rheological properties, alone and in admixture with rice flour. The temperature ramp tests showed clear differences in the rheological behavior of the batters supplemented with different proteins. The highest thermal stability was observed in case of soy protein samples. Frequency sweep tests indicated significant improvements of the rheological properties of rice flour supplemented with 15% gluten or soy proteins. The thermo-mechanical tests showed that, due to the high fat contents and low level of free water, the dough samples containing powdered eggs exhibited the highest stability. Addition of gluten resulted in a significant decrease of the dough development time, whereas samples with powdered eggs and soy proteins were more difficult to hydrate. The incorporation of proteins into the rice flour-based dough formulations significantly affected starch behavior by decreasing the peak consistency values. Concerning the quality of the rice flour-based breads, soy protein addition resulted in lighter crumb color and increased texture attributes, samples with gluten had better resilience and adhesiveness, whereas breads with egg protein were less brittle.

  4. Optimisation of near-infrared reflectance model in measuring protein and amylose content of rice flour.

    Science.gov (United States)

    Xie, L H; Tang, S Q; Chen, N; Luo, J; Jiao, G A; Shao, G N; Wei, X J; Hu, P S

    2014-01-01

    Near-infrared reflectance spectroscopy (NIRS) has been used to predict the cooking quality parameters of rice, such as the protein (PC) and amylose content (AC). Using brown and milled flours from 519 rice samples representing a wide range of grain qualities, this study was to compare the calibration models generated by different mathematical, preprocessing treatments, and combinations of different regression algorithm. A modified partial least squares model (MPLS) with the mathematic treatment "2, 8, 8, 2" (2nd order derivative computed based on 8 data points, and 8 and 2 data points in the 1st and 2nd smoothing, respectively) and inverse multiplicative scattering correction preprocessing treatment was identified as the best model for simultaneously measurement of PC and AC in brown flours. MPLS/"2, 8, 8, 2"/detrend preprocessing was identified as the best model for milled flours. The results indicated that NIRS could be useful in estimation of PC and AC of breeding lines in early generations of the breeding programs, and for the purposes of quality control in the food industry. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Defatted flaxseed meal incorporated corn-rice flour blend based extruded product by response surface methodology.

    Science.gov (United States)

    Ganorkar, Pravin M; Patel, Jhanvi M; Shah, Vrushti; Rangrej, Vihang V

    2016-04-01

    Considering the evidence of flaxseed and its defatted flaxseed meal (DFM) for human health benefits, response surface methodology (RSM) based on three level four factor central composite rotatable design (CCRD) was employed for the development of DFM incorporated corn - rice flour blend based extruded snack. The effect of DFM fortification (7.5-20 %), moisture content of feed (14-20 %, wb), extruder barrel temperature (115-135 °C) and screw speed (300-330 RPM) on expansion ratio (ER), breaking strength (BS), overall acceptability (OAA) score and water solubility index (WSI) of extrudates were investigated using central composite rotatable design (CCRD). Significant regression models explained the effect of considered variables on all responses. DFM incorporation level was found to be most significant independent variable affecting on extrudates characteristics followed by extruder barrel temperature and then screw rpm. Feed moisture content did not affect extrudates characteristics. As DFM level increased (7.5 % to 20 %), ER and OAA value decreased. However, BS and WSI values were found to increase with increase in DFM level. Based on the defined criteria for numerical optimization, the combination for the production of DFM incorporated extruded snack with desired sensory attributes was achieved by incorporating 10 % DFM (replacing rice flour in flour blend) and by keeping 20 % moisture content, 312 screw rpm and 125 °C barrel temperature.

  6. Particle size fractionation of high-amylose rice (Goami 2) flour as an oil barrier in a batter-coated fried system

    Science.gov (United States)

    The particle size effects of high-amylose rice (Goami 2) flour on quality attributes of frying batters were characterized in terms of physicochemical, rheological, and oil-resisting properties. High-amylose rice flours were fractionated into four fractions (70, 198, 256, and 415 µm) of which morpho...

  7. Preparation and certification of rice flour reference materials for trace elements analysis

    International Nuclear Information System (INIS)

    Cho, Kyung Haeng; Park, Chang Joon; Woo, Jin Choon; Suh, Jung Ki; Han, Myung Sub; Lee, Jong Hae

    1998-01-01

    Rice flour reference materials were prepared from the unpolished rice grown in korea and certified for elemental composition. The reference materials consist of two samples containing normal and high level. The reference material at elevated level was prepared by spiking to the normal rice flour six toxic elements of As, Cd, Cu, Cr, Hg, Pb with 1.0μg/g on a dry weight basis. Homogeneity of the prepared materials was evaluated through the determination of Ca, Cu, Fe, Mn, Zn by instrumental neutron activation analysis (INAA) and atomic absorption spectrometry (AAS). Small variance of elemental composition among inter-bottled samples assured homogeneity of the prepared materials. The materials were decomposed by high pres-sure digestion and microwave digestion method. INAA, AAS, inductively coupled plasma-atomic absorption spectrometry (ICP-AES), ICP-mass spectrometry (MS) and vapour generation techniques were employed to analyze the reference materials. From this independent analytical results, the certified or reference values are determined for As, Ca, Cd, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, P, Pb, Se, Zn

  8. Extraction techniques for arsenic species in rice flour and their speciation by HPLC-ICP-MS.

    Science.gov (United States)

    Narukawa, Tomohiro; Suzuki, Toshihiro; Inagaki, Kazumi; Hioki, Akiharu

    2014-12-01

    The extraction of arsenic (As) species present in rice flour samples was investigated using different extracting solvents, and the concentration of each species was determined by HPLC-ICP-MS after heat-assisted extraction. The extraction efficiencies for total arsenic species and especially for arsenite [As(III)] and arsenate [As(V)] were investigated. As(III), As(V) and dimethylarsinic acid (DMAA) were found in the samples, and the concentration of DMAA did not vary with treatment conditions. However, the concentrations of extracted total arsenic and those of As(III) and As(V) depended on the extracting solvents. When an extracting solvent was highly acidic, the concentrations of extracted total arsenic were in good agreement with the total arsenic concentration determined by ICP-MS after microwave-assisted digestion, though a part of the As(V) was reduced to As(III) during the highly acidic extraction process. Extraction under neutral conditions increased the extracted As(V), but extracted total arsenic was decreased because a part of the As(III) could not be extracted. Optimum conditions for the extraction of As(III) and As(V) from rice flour samples are discussed to allow the accurate determinations of As(III), As(V) and DMAA in the rice flour samples. Heat block extraction techniques using 0.05 mol L(-1) HClO4 and silver-containing 0.15 mol L(-1) HNO3 were also developed. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Mixture design of rice flour, maize starch and wheat starch for optimization of gluten free bread quality.

    Science.gov (United States)

    Mancebo, Camino M; Merino, Cristina; Martínez, Mario M; Gómez, Manuel

    2015-10-01

    Gluten-free bread production requires gluten-free flours or starches. Rice flour and maize starch are two of the most commonly used raw materials. Over recent years, gluten-free wheat starch is available on the market. The aim of this research was to optimize mixtures of rice flour, maize starch and wheat starch using an experimental mixture design. For this purpose, dough rheology and its fermentation behaviour were studied. Quality bread parameters such as specific volume, texture, cell structure, colour and acceptability were also analysed. Generally, starch incorporation reduced G* and increased the bread specific volume and cell density, but the breads obtained were paler than the rice flour breads. Comparing the starches, wheat starch breads had better overall acceptability and had a greater volume than maize-starch bread. The highest value for sensorial acceptability corresponded to the bread produced with a mixture of rice flour (59 g/100 g) and wheat starch (41 g/100 g).

  10. Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion

    Directory of Open Access Journals (Sweden)

    Reginaldo Ferreira da Silva

    2013-03-01

    Full Text Available Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German and the effect of the extrusion process on the variables moisture content (16%, 18% and 20% and temperature in the third extruding zone (140 °C, 160 °C and 180 °C was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.

  11. Quantification and characterization of volatiles evolved during extrusion of rice and soy flours

    Science.gov (United States)

    Vodovotz, Y.; Zasypkin, D.; Lertsiriyothin, W.; Lee, T. C.; Bourland, C. T.

    2000-01-01

    NASA-Johnson Space Center is designing and building a habitat (Bioregenerative Planetary Life Support Systems Test Complex, BIO-Plex) intended for evaluating advanced life support systems developed for long-duration missions to the Moon or Mars where all consumables will be recycled and reused. A food system based on raw products obtained from higher plants (such as soybeans, rice, and wheat) may be a central feature of a biologically based Advanced Life Support System. To convert raw crops to edible ingredients or food items, multipurpose processing equipment such as an extruder is ideal. Volatile compounds evolved during the manufacturing of these food products may accumulate and reach toxic levels. Additionally, off-odors often dissipated in open-air environments without consequence may cause significant discomfort in the BIO-Plex. Rice and defatted soy flours were adjusted to 16% moisture, and triplicate samples were extruded using a tabletop single-screw extruder. The extrudate was collected in specially designed Tedlar bags from which air samples could be extracted. The samples were analyzed by GC-MS with special emphasis on compounds with Spacecraft Maximum Allowable Concentrations (SMACs). Results showed a combination of alcohols, aldehydes, ketones, and carbonyl compounds in the different flours. Each compound and its SMAC value, as well as its impact on the air revitalization system, was discussed.

  12. Reversed Phase Column HPLC-ICP-MS Conditions for Arsenic Speciation Analysis of Rice Flour.

    Science.gov (United States)

    Narukawa, Tomohiro; Matsumoto, Eri; Nishimura, Tsutomu; Hioki, Akiharu

    2015-01-01

    New measurement conditions for arsenic speciation analysis of rice flour were developed using HPLC-ICP-MS equipped with a reversed phase ODS column. Eight arsenic species, namely, arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), trimethylarsine oxide (TMAO), tetramethylarsonium (TeMA), arsenobetaine (AsB) and arsenocholine (AsC), were separated and determined under the proposed conditions. In particular, As(III) and MMAA and DMAA and AsB were completely separated using a newly proposed eluent containing ammonium dihydrogen phosphate. Importantly, the sensitivity changes, in particular those of As(V) and As(III) caused by coexisting elements and by complex matrix composition, which had been problematical in previously reported methods, were eliminated. The new eluent can be applied to C8, C18 and C30 ODS columns with the same effectiveness and with excellent repeatability. The proposed analytical method was successfully applied to extracts of rice flour certified reference materials.

  13. Multiresidue analysis of 47 pesticides in cooked wheat flour and polished rice by liquid chromatography with tandem mass spectrometry.

    Science.gov (United States)

    Lee, Sung Jung; Park, Hyeong Jin; Kim, Wooseong; Jin, Jong Sung; Abd El-Aty, A M; Shim, Jae-Han; Shin, Sung Chul

    2009-04-01

    Liquid chromatography in conjunction with tandem mass spectrometry was used to directly quantify of 47 pesticide residues from cooked wheat flour and polished rice, which are the most widely consumed cereals in the Republic of Korea. The sample clean-up was carried out according to the method established by the Korea Food and Drug Administration. The mobile phase for liquid chromatography separation consisted of water and 5 mm methanolic ammonium formate. Tandem mass spectroscopy experiments were performed in electrospray ionization positive mode and the multiple reaction monitoring mode. The matrix effects estimated for the 47 pesticides had a mean value of 99% and ranged from 45 to 147%. High recoveries (70-140%) and relative standard deviations (flour and polished rice samples. Of the screened pesticide residues, only tricyclazole and fenobucarb were found in polished rice samples. However, no samples contained residues above the MRL established by the Korea Food and Drug Administration.

  14. Physical properties and FTIR analysis of rice-oat flour and maize-oat flour based extruded food products containing olive pomace.

    Science.gov (United States)

    Ying, DanYang; Hlaing, Mya Myintzu; Lerisson, Julie; Pitts, Keith; Cheng, Lijiang; Sanguansri, Luz; Augustin, Mary Ann

    2017-10-01

    Olive pomace, a waste stream from olive oil processing, was fractionated by centrifugation to obtain a supernatant and a flesh-enriched fraction, and freeze dried to obtain a powder. The dried supernatant contained 5.8% moisture, 4.8% protein, 3.5% fat, 3.5% ash, 82.4% carbohydrate (including 17.2% dietary fiber) and polyphenols (2970mg gallic acid equivalents (GAE)/100g). The dried flesh-enriched fraction, contained 5.9% moisture, 13.4% protein, 14.2% fat, 3.5% ash, 63.1% carbohydrate (including 42.7% dietary fiber) and polyphenols (1960mg GAE/100g). The extruded products using rice-oat flour or maize-oat flour mixtures as the base were formulated to contain 5% or 10% olive pomace fractions (dry basis). The extruded products with added olive pomace fractions has higher fiber (2-7g/100g) and polyphenol contents (67-161mg GAE/100g) compared to the corresponding mixtures of rice-oat flour base (0.92g/100g fiber, 20mg GAE/100g) or maize-oat flour base (3.2g/100g fiber, 20mg GAE/100g) without olive pomace fractions. Addition of olive pomace fractions reduced the die pressure and specific mechanical energy during extrusion and resulted in lower radial expansion in the extruded product. The impact of the addition of olive pomace fraction on physical characteristics of the extruded product is higher for rice-oat flour base than maize-oat flour base. The underlining mechanism was explained by FTIR analysis. FTIR showed that there were significant changes in the carbohydrate components and the structure of the proteins on extrusion, with consequent effects on the expansion and density of the extruded product. This study showed the feasibility of preparing fiber and polyphenol enriched extruded products by incorporation of olive pomace. This shows the potential of recovery and diversion of edible components from waste streams of olive oil processing for formulation of extruded products. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. STORAGE, NUTRITIONAL AND SENSORY PROPERTIES OF HIGH-FAT FISH AND RICE FLOUR COEXTRUDATES

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Shahab Sokhansanj; Sukumar Bandyopadhyay; Amarender Singh Bawa

    2013-10-01

    The present research is on understanding the storage, nutritional and sensory characteristics of high-fat fish (khoira) and rice flour coextrudates at storage temperature of 30C. The extruder processing conditions used are barrel temperature (200C), screw speed (109 rpm), fish content of feed (44%) and feed moisture content (39%). Sorption isotherm data indicated that the safe aw level was about 0.4–0.7. Guggenheim -Anderson -de Boer model described the sorption data adequately with an r2 value of 0.99. During the initial 15 days of storage, there was a loss of vitamin A and total tocopherols by 64.4 and 20.6%, and an increase in peroxides and free fatty acid content by about 116 mg/kg and 21.7%. The nonlinear mathematical model developed has adequately described the changes in nutritional and storage properties. Sensory attributes indicated that the product fried for 15 s was most acceptable.

  16. Soybean-Enriched Snacks Based on African Rice

    Directory of Open Access Journals (Sweden)

    Mauro Marengo

    2016-05-01

    Full Text Available Snacks were produced by extruding blends of partially-defatted soybean flour with flours from milled or parboiled African-grown rice. The interplay between composition and processing in producing snacks with a satisfactory sensory profile was addressed by e-sensing, and by molecular and rheological approaches. Soybean proteins play a main role in defining the properties of the protein network in the products. At the same content in soybean flour, use of parboiled rice flour increases the snack’s hardness. Electronic nose and electronic tongue discriminated samples containing a higher amount of soybean flour from those with a lower soybean flour content.

  17. Soybean-Enriched Snacks Based on African Rice

    Science.gov (United States)

    Marengo, Mauro; Akoto, Hannah F.; Zanoletti, Miriam; Carpen, Aristodemo; Buratti, Simona; Benedetti, Simona; Barbiroli, Alberto; Johnson, Paa-Nii T.; Sakyi-Dawson, Esther O.; Saalia, Firibu K.; Bonomi, Francesco; Pagani, Maria Ambrogina; Manful, John; Iametti, Stefania

    2016-01-01

    Snacks were produced by extruding blends of partially-defatted soybean flour with flours from milled or parboiled African-grown rice. The interplay between composition and processing in producing snacks with a satisfactory sensory profile was addressed by e-sensing, and by molecular and rheological approaches. Soybean proteins play a main role in defining the properties of the protein network in the products. At the same content in soybean flour, use of parboiled rice flour increases the snack’s hardness. Electronic nose and electronic tongue discriminated samples containing a higher amount of soybean flour from those with a lower soybean flour content. PMID:28231133

  18. Functional Properties of Glutinous Rice Flour by Dry-Heat Treatment.

    Directory of Open Access Journals (Sweden)

    Yang Qin

    Full Text Available Glutinous rice flour (GRF and glutinous rice starch (GRS were modified by dry-heat treatment and their rheological, thermal properties and freeze-thaw stability were evaluated. Compared with the native GRF and GRS, the water-holding ability of modified GRF and GRS were enhanced. Both the onset and peak temperatures of the modified samples increased while the endothermic enthalpy change decreased significantly (p < 0.05. Meanwhile, dry heating remarkably increased the apparent viscosities of both GRF and GRS. Importantly, compared with GRS samples, the storage modulus (G' and loss modulus (G" values of modified GRF increased more greatly and the tanδ values decreased more remarkably, indicating that the dry-heat treatment showed more impact on the GRF and a higher viscoelasticity compared with GRS. Our results suggest the dry-heat treatment of GRF is a more effective method than that of GRS, which omits the complex and tedious process for purifying GRS, and thereby has more practical applications in the food industry.

  19. Functional Properties of Glutinous Rice Flour by Dry-Heat Treatment.

    Science.gov (United States)

    Qin, Yang; Liu, Chengzhen; Jiang, Suisui; Cao, Jinmiao; Xiong, Liu; Sun, Qingjie

    2016-01-01

    Glutinous rice flour (GRF) and glutinous rice starch (GRS) were modified by dry-heat treatment and their rheological, thermal properties and freeze-thaw stability were evaluated. Compared with the native GRF and GRS, the water-holding ability of modified GRF and GRS were enhanced. Both the onset and peak temperatures of the modified samples increased while the endothermic enthalpy change decreased significantly (p < 0.05). Meanwhile, dry heating remarkably increased the apparent viscosities of both GRF and GRS. Importantly, compared with GRS samples, the storage modulus (G') and loss modulus (G") values of modified GRF increased more greatly and the tanδ values decreased more remarkably, indicating that the dry-heat treatment showed more impact on the GRF and a higher viscoelasticity compared with GRS. Our results suggest the dry-heat treatment of GRF is a more effective method than that of GRS, which omits the complex and tedious process for purifying GRS, and thereby has more practical applications in the food industry.

  20. Rheology of Rice Flour Dough with Gum Arabic: Small and Large-Deformation Studies, Sensory Assessment and Modeling.

    Science.gov (United States)

    Shanthilal, J; Bhattacharya, Suvendu

    2015-08-01

    The absence of gluten protein makes the rice flour doughs difficult to handle when flattened/sheeted products are to be prepared. The rheological, sensory and microstructural changes in rice flour doughs having gum Arabic (0% to 5%, w/w) and moisture contents (44% to 50%) were studied for improving the dough handling characteristics. Rheological parameters like storage modulus (G') and complex viscosity (η*) decreased with an increase in moisture content while loss angle (δ) increased. A power-law type equation was suitable to relate angular frequency (ω) with G', G", and η* (0.814 ≤ r ≤ 0.999, P ≤ 0.01). An increase in gum and moisture contents increased δ from 6.9° to 15.5° but decreased the energy required for compression/flattening. The 6-element spring-dashpot model was suitable (r ≥ 0.991, P ≤ 0.01) for creep curves. The sensory panel had the opinion that dough with a low to moderate hardness between 3 and 4, and stickiness of ≤ 3.5 was suitable for the purpose of flattening in relation to the preparation of sheeted/flattened products; the appropriate condition for dough formulation was with the moisture and gum contents of 47.0% to 47.9% and 1.55% to 2.25%, respectively to offer the desirability index between 0.50 and 0.52. The microstructure of the rice flour dough in the absence of gum Arabic appeared to possess loosely bound flour particles. The presence of gum provided a coating on flour particles to yield dough having good cohesive microstructure. © 2015 Institute of Food Technologists®

  1. Chemical, physical, and sensory characteristics of analog rice developed from the mocaf, arrowroof, and red bean flour

    Science.gov (United States)

    Wahjuningsih, S. B.; Susanti, S.

    2018-01-01

    This research was aimed to analyze the chemical, physical, and sensory characteristics of the analog rice developed from a composite formula consisting of mocaf, arrowroot, and red bean flour. Experiment was designed into 5 different composition types i.e B1 (90%: 0%: 10%), B2 (80%:10%: 10%), B3 (70% : 20% : 10%), B4 (60%: 30%:10%), and B5 (50%: 40%: 10%) which in each type was repeated in 4 times. Carrageenan was used as a binder in the making process of those analog rice. Investigation procedure was carried out into several stages such as preparation and characterization of raw materials, production of analog rice in composite formula, then the testing of its chemical and sensory properties. Chemical characteristics were evaluated about the level of starch, amylose, dietary fiber, and resistant starch while sensory characteristics were examined about the texture, flavor, and aroma. The result showed that based on the sensory test, the best composite formula of rice analog was B2 (ratio flour of mocaf: Arrowroot: Red bean = 80:10:10). In addition, B2 formula possessed the chemical characteristics similar with the truth rice either in water content (12.18%), ash (2.63%), protein (6.17%), fat (1.31%), carbohydrate (89.88%), starch (73.29%), amylose (24.91%), total dietary fiber (7.04%), or resistant starch (6.71%). Furthermore, the higher of arrowroot flour proportion, the greater of amylose, dietary fiber and resistant starch containing in the rice analog. In the opposite, its starch content was getting down.

  2. Effects of different hydrocolloids on properties of gluten-free bread based on small broken rice berry flour.

    Science.gov (United States)

    Numfon, Rakkhumkaew

    2017-06-01

    Gluten-free bread formulations based on small broken rice berry using various types of hydrocolloids (xanthan gum, guar gum, and locust bean gum) at different concentrations (0, 1, 1.5, and 2 g/100 g) were tested in this study. The effects of hydrocolloid addition on the pasting properties of flour were also investigated, including the quality parameters of the breads. The pasting properties of small broken rice berry flour incorporated with guar gum were most affected. Gluten-free bread containing hydrocolloid showed improved qualities in terms of loaf specific volume, texture, sensory values, and microstructure. A 1 g/100 g of hydrocolloid addition was sufficient to improve the physical and chemical qualities of bread. The highest score of all attributes from the sensory evaluation was obtained by gluten-free bread containing 1 g/100 g guar gum.

  3. Exploitation of alfalfa seed (Medicago sativa L.) flour into gluten-free rice cookies: Nutritional, antioxidant and quality characteristics.

    Science.gov (United States)

    Giuberti, Gianluca; Rocchetti, Gabriele; Sigolo, Samantha; Fortunati, Paola; Lucini, Luigi; Gallo, Antonio

    2018-01-15

    In an effort to increase the nutritional value of common gluten-free (GF) cereal-based foods, GF cookies using alfalfa seed flour (ASF), at different substitution levels to common rice flour (0% as control, 15%, 30% and 45% w/w), were produced. Crude protein, total dietary fibre, total polyunsaturated, total n-3 and n-6 fatty acid contents increased linearly (p<0.05) by raising the substitution levels of rice with ASF. The hardness, the total phenolic content, the in vitro antioxidant capacity and the resistant starch increased linearly (p<0.05), whereas the starch hydrolysis index decreased linearly (p<0.05) by raising the substitution levels of rice flour with ASF. Despite the fact that ASF-substituted GF cookies had inferior sensory attributes compared to the control, the score given by the panellists remained at fairly good levels for all tested parameters, showing acceptability of the substituted GF cookies. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Total antioxidant capacity and starch digestibility of muffins baked with rice, wheat, oat, corn and barley flour.

    Science.gov (United States)

    Soong, Yean Yean; Tan, Seow Peng; Leong, Lai Peng; Henry, Jeya Kumar

    2014-12-01

    Muffins are a popular snack consumed in western and emerging countries. Increased glycemic load has been implicated in the aetiology of diabetes. This study examined the starch digestibility of muffins baked with rice, wheat, corn, oat and barley flour. Rapidly digested starch (RDS) was greatest in rice (445 mg/g) and wheat (444 mg/g) muffins, followed by oat (416 mg/g), corn (402 mg/g) and barley (387 mg/g). Total phenolic content was found to be positively correlated with total antioxidative capacity and inversely related to the RDS of muffins. The phenolic content was highest in muffin baked with barley flour (1,687 μg/g), followed by corn (1,454 μg/g), oat (945 μg/g), wheat (705 μg/g), and rice (675 μg/g) flour. Browning was shown not to correlate with free radical scavenging capacity and digestibility of muffins. The presence of high phenolic content and low RDS makes barley muffin an ideal snack to modulate glycemic response. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Investigation of process and product parameters for physicochemical properties of rice and mung bean (Vigna radiata) flour based extruded snacks.

    Science.gov (United States)

    Sharma, Chetan; Singh, Baljit; Hussain, Syed Zameer; Sharma, Savita

    2017-05-01

    PR 106 and SML 668 cultivars of rice and mung bean respectively, were studied for their potential to serve as a nutritious snack with improved protein quality and quantity. The effect of extrusion conditions, including feed moisture content (14-18%), screw speed (400-550 rpm) and barrel temperature (130-170°C) on the physicochemical properties (bulk density, water absorption index (WAI), water solubility index (WSI) and hardness) was investigated. The replacement of rice flour at 30% level with mung bean flour for making extruded snacks was evaluated. Pasting temperature increased (84-93 °C) while peak viscosity (2768-408 cP), hold viscosity (2018-369 cP), breakdown (750-39 cP), setback (2697-622 cP) and final viscosity (4715-991 cP) decreased with increasing mung bean flour addition. Increasing feed moisture lowered the specific mechanical energy (SME), WAI and WSI of extrudates whereas increased bulk density and hardness. Higher screw speed had linear positive effect on SME of extruder and negative linear effect on WAI. Positive curvilinear quadratic effect of screw speed was also observed on WSI and density. Higher barrel temperature linearly decreased the SME, density and hardness of extrudates. Developed extrusion cooked rice-mung bean snacks with increased protein content and improved protein quality along with higher dietary fibre and minerals have good potential in effectively delivering the nutrition to the population.

  6. Rheological and secondary structural characterization of rice flour-zein composites for noodles slit from gluten-free sheeted dough.

    Science.gov (United States)

    Jeong, Sungmin; Kim, Hee Won; Lee, Suyong

    2017-04-15

    Rice flour-zein composites in a hydrated viscoelastic state were utilized to compensate for the role of wheat gluten in gluten-free sheeted dough. The use of zein above its glass transition temperature was able to form a viscoelastic protein network of non-wheat dough with rice flour. The mixing stability and development time of the rice dough were positively increased with increasing levels of zein. The protein secondary structural analysis by FTIR spectroscopy demonstrated that the rice doughs with high levels of zein showed significant increases in β-sheet structures whose intensity was almost doubled by the use of 10% zein. The use of zein at more than 5% (w/w) successfully produced gluten-free dough sheets that could be slit into thin and long noodle strands. In addition, the composites were effective in improving the rheological characteristics of gluten-free noodle strands by increasing their maximum force to extension, compared to wheat-based noodles. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Multielement analysis of rice flour-unpolished reference material by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Suzuki, Shogo; Hirai, Shoji

    1990-01-01

    Trace elements in NIES certified reference material No. 10-a∼10-c Rice Flour-Unpolished, prepared by the National Institute for Environmental Studies of Japan (NIES), were determined by instrumental neutron activation analysis (INAA). A set of three samples with different Cd concentration levels was subjected to analyses. Portions of each sample (ca. 200∼1000 mg) were irradiated, either with thermal neutrons without cadmium filter or with epithermal neutrons with cadmium filter, in the Musashi Institute of Technology Research Reactor (MITRR). The activated samples were analyzed by the three methods; conventional γ-ray spectrometry using a coaxial Ge detector, anticoincidence counting spectrometry, and coincidence counting spectrometry using a coaxial Ge detector and a well type NaI(Tl) detector. Concentrations of 26∼28 elements were determined by these methods. The values obtained for many elements, except for Mg and K, were in good agreement with those of the NIES certified and reference. Concentrations of 10 elements (S, Sc, V, Ag, Sb, Cs, Ba, La, Sm, Th), whose certified or reference values are not available from NIES, were also determined in this work. (author)

  8. Relationships of damaged starch granules and particle size distribution with pasting and thermal profiles of milled MR263 rice flour.

    Science.gov (United States)

    Asmeda, R; Noorlaila, A; Norziah, M H

    2016-01-15

    This research was conducted to investigate the effects of different grinding techniques (dry, semi-wet and wet) of milled rice grains on the damaged starch and particle size distribution of flour produced from a new variety, MR263, specifically related to the pasting and thermal profiles. The results indicated that grinding techniques significantly (price flour. Wet grinding process yields flour with lowest percentage of starch damage (7.37%) and finest average particle size (8.52μm). Pasting and gelatinization temperature was found in the range of 84.45-89.63°C and 59.86-75.31°C, respectively. Dry ground flour attained the lowest pasting and gelatinization temperature as shown by the thermal and pasting profiles. Correlation analysis revealed that percentage of damaged starch granules had a significant, negative relationship with pasting temperature while average particle size distribution had a significant, strong negative relationship with gelatinization temperature. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Physicochemical Characteristics of Artificial Rice from Composite Flour: Modified Cassava Starch, Canavalia ensiformis and Dioscorea esculenta

    OpenAIRE

    Sumardiono Siswo; Pudjihastuti Isti; Abyor Handayani Noer; Kusumayanti Heny

    2018-01-01

    Indonesia is the third largest country on the global paddy rice production and also considered as a rice importer. Even, Indonesia has the biggest per capita consumption of paddy rice (140 kg of paddy rice per person per year). Product diversification using local commodities. Artificial rice is potential to be developed as a new value product using different types of grains. It is one of appropriate solutions for reducing imported rice rate. Artificial rice was produced using high nutrition c...

  10. Milling of rice grains. The degradation on three structural levels of starch in rice flour can be independently controlled during grinding.

    Science.gov (United States)

    Tran, Thuy T B; Shelat, Kinnari J; Tang, Daniel; Li, Enpeng; Gilbert, Robert G; Hasjim, Jovin

    2011-04-27

    Whole polished rice grains were ground using cryogenic and hammer milling to understand the mechanisms of degradation of starch granule structure, whole (branched) molecular structure, and individual branches of the molecules during particle size reduction (grinding). Hammer milling caused greater degradation to starch granules than cryogenic milling when the grains were ground to a similar volume-median diameter. Molecular degradation of starch was not evident in the cryogenically milled flours, but it was observed in the hammer-milled flours with preferential cleavage of longer (amylose) branches. This can be attributed to the increased grain brittleness and fracturability at cryogenic temperatures, reducing the mechanical energy required to diminish the grain size and thus reducing the probability of chain scission. The results indicate, for the first time, that branching, whole molecule, and granule structures of starch can be independently altered by varying grinding conditions, such as grinding force and temperature.

  11. Effect of parboiling on the formation of resistant starch, digestibility and functional properties of rice flour from different varieties grown in Sri Lanka.

    Science.gov (United States)

    Gunaratne, Anil; Kao, Wu; Ratnayaka, Jennet; Collado, Lilia; Corke, Harold

    2013-08-30

    Hydrothermal treatment used in parboiling could induce formation of novel starch properties having potential food applications. In the current work, functional, digestible and retrogradation properties of flour from non-parboiled and steamed parboiled six rice varieties with high amylose content of around 30% but differing in length and width ratio were investigated and compared. The parboiling process reduced swelling volume and amylose leaching in all tested varieties. Among the varieties studied, the resistant starch content ranged from 1.6% in AT 306 to 0.46% in BG 357. Parboiling reduced the resistant starch content in AT 306 by about 50%, but it did not significantly affect the resistant starch content of the other varieties. The amylose-lipid complex remained unchanged after parboiling. Amylopectin retrogradation was not observed in parboiled rice. Amylose retrogradation was not seen except for AT 306. Pasting behaviour of parboiled rice flours showed high pasting stability and low setback. Flours were more susceptible to enzymatic hydrolysis after parboiling. Partial gelatinisation during parboiling was sufficient to produce grains with excellent milling quality showing a head rice recovery that ranged from 98% to 100% among the varieties studied. Degree of gelatinisation is the most important factor that determines the high head rice recovery. High pasting stability and low setback of flour of parboiled rice indicate some potential food applications. © 2013 Society of Chemical Industry.

  12. Glycemic potency of muffins made with wheat, rice, corn, oat and barley flours: a comparative study between in vivo and in vitro.

    Science.gov (United States)

    Soong, Yean Yean; Quek, Rina Yu Chin; Henry, Christiani Jeyakumar

    2015-12-01

    Muffins made with wheat flour are a popular snack consumed in western and emerging countries. This study aimed to examine the content of amylose, glycemic response (GR) and glycemic index (GI) of muffins baked with refined wheat and rice flours, as well as wholegrain corn, oat and barley flours. This study adopted a randomized, controlled, crossover, non-blind design. Twelve healthy participants consumed wheat, rice, corn, oat and barley muffins once and the reference glucose solution three times in a random order on non-consecutive day. Capillary blood samples were taken every 15 min in the first 60 min and every 30 min for the remaining 60 min for blood glucose analysis. The Megazyme amylose/amylopectin assay procedure was employed to measure amylose content. The GR elicited from the consumption of wheat, rice and corn muffins was comparable between these samples but significantly greater when compared with oat and barley muffins. Consumption of wholegrain muffins, apart from corn muffin, blunted postprandial GR when compared with muffins baked with refined cereal flours. Muffins baked with wheat, rice, corn, oat and barley flours gave rise to GI values of 74, 79, 74, 53 and 55, respectively. The content of amylose was significantly higher in corn, oat and barley muffins than wheat and rice muffins. The greater content of amylose and fibre may play a part in the reduced glycemic potency of oat and barley muffins. Wheat flour can be substituted with oat and barley flours for healthier muffins and other bakery products.

  13. A rapid monitoring method for inorganic arsenic in rice flour using reversed phase-high performance liquid chromatography-inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Narukawa, Tomohiro; Chiba, Koichi; Sinaviwat, Savarin; Feldmann, Jörg

    2017-01-06

    A new rapid monitoring method by means of high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) following the heat-assisted extraction was developed for measurement of total inorganic arsenic species in rice flour. As(III) and As(V) eluted at the same retention time and completely separated from organoarsenic species by an isocratic elution program on a reversed phase column. Therefore, neither ambiguous oxidation of arsenite to arsenate nor the integration of two peaks were necessary to determine directly the target analyte inorganic arsenic. Rapid injection allowed measuring 3 replicates within 6min and this combined with a quantitative extraction of all arsenic species from rice flour by a 15min HNO 3 -H 2 O 2 extraction makes this the fastest laboratory based method for inorganic arsenic in rice flour. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Characterization of Gluten-free Bread Prepared From Maize, Rice and Tapioca Flours using the Hydrocolloid Seaweed Agar-Agar

    OpenAIRE

    Alvarenga, Nuno Bartolomeu; Cebola Lidon, Fernando; Belga, Elisa; Motrena, Patrícia; Guerreiro, Suse; Carvalho, Maria João; Canada, João

    2011-01-01

    Disponível em livre acesso no sítio do DOAJ em http://recent-science.com/index This work aims to check the rheological, physicochemical and sensory characteristics of gluten-free bread produced with corn, rice and tapioca flours, using the hydrocolloid seaweed agar-agar. Relatively to wheat bread, it was found that the pH was slightly lower in gluten-free bread. In the crust only the brightness remained significantly different between both bread types, but in the kernel, the parameters a*,...

  15. Effect of extrusion temperature and moisture content of corn flour on crystallinity and hardness of rice analogues

    Science.gov (United States)

    Budi, Faleh Setia; Hariyadi, Purwiyatno; Budijanto, Slamet; Syah, Dahrul

    2015-12-01

    Rice analogues are food products made of broken rice and/or any other carbohydrate sources to have similar texture and shape as rice. They are usually made by hot extrusion processing. The hot extrusion process may change the crystallinity of starch and influence the characteristic of rice analogues. Therefore, this research aimed to study the effect of moisture content of incoming dough and temperature of extrusion process on the crystallinity and hardness of resulting rice analogues. The dough's were prepared by mixing of corn starch-flour with ratio 10/90 (w/w) and moisture content of 35%, 40% and 45% (w/w) and extrusion process were done at temperature of 70, 80, 90°C by using of twin screw extruder BEX-DS-2256 Berto. The analyses were done to determine the type of crystal, degree of crystallinity, and hardness of the resulting rice analogues. Our result showed that the enhancement of extrusion temperature from 70 - 90°C increased degree of crystallinity from 5.86 - 15.00% to 10.70 - 18.87% and hardness from 1.71 - 4.36 kg to 2.05 - 5.70 kg. The raising of dough moisture content from 35 - 45% decreased degree of crystallinity from 15.00 - 18.87% to 5.86 - 10.70% and hardness from 4.36 - 5.70 kg to 1.71 - 2.05 kg. The increase of degree of crystallinity correlated positively with the increase of hardness of rice analogues (r = 0.746, p = 0.05).

  16. Quality characteristics of gluten-free cookies made of buckwheat, corn, and rice flour with/without transglutaminase.

    Science.gov (United States)

    Altındağ, Gülçin; Certel, Muharrem; Erem, Fundagül; İlknur Konak, Ülgen

    2015-04-01

    Buckwheat is one of the most valuable pseudo-cereals in terms of its nutritional composition, and it is suitable for celiac patients because of its gluten-free characteristic. However, gluten is the main structure-forming protein responsible for the development of structure in baked products. Therefore, it is a challenge to produce high-quality gluten-free products. Transglutaminase addition is a relatively common application used in the production of gluten-free baked goods. The objective of this study was to investigate the combination of buckwheat flour with rice and corn flour at different levels in gluten-free cookie formulations and the impact of transglutaminase on the quality of cookies. Quality parameters evaluated were proximal chemical composition, spread ratio, color, and textural parameters (hardness and fracturability). Spread ratio, protein, crude fiber, ash content, and also b* and hardness values were significantly (p flour combinations. Further, addition of transglutaminase resulted in increased moisture content, spread ratio, and fracturability but decreased hardness values. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  17. Effects of processing moisture on the physical properties and in vitro digestibility of starch and protein in extruded brown rice and pinto bean composite flours.

    Science.gov (United States)

    Sumargo, Franklin; Gulati, Paridhi; Weier, Steven A; Clarke, Jennifer; Rose, Devin J

    2016-11-15

    The influence of pinto bean flour and processing moisture on the physical properties and in vitro digestibility of rice-bean extrudates has been investigated. Brown rice: pinto bean flour (0%, 15%, 30%, and 45% bean flour) were extruded under 5 moisture conditions (17.2%, 18.1%, 18.3%, 19.5%, and 20.1%). Physical properties [bulk density, unit density, radial expansion, axial expansion, overall expansion, specific volume, hardness, color, water solubility index, and water absorption index] and in vitro starch and protein digestibilities were determined. Increasing bean flour and processing moisture increased density and hardness while decreasing expansion. Rapidly digestible starch decreased and resistant starch increased as bean substitution and processing moisture increased. In vitro protein digestibility increased with increasing bean flour or with decreasing processing moisture. Incorporating bean flour into extruded snacks can negatively affect physical attributes (hardness, density, and expansion) while positively affecting in vitro starch (decrease) and protein (increase) digestibilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Low temperature thermally stimulated luminescence characteristics of rice flour with and without H2O and D2O

    International Nuclear Information System (INIS)

    Murthy, K.V.R.; Rey, L.

    2008-01-01

    Thermo luminescence (TL) characteristics of rice flour are studied in the temperature range of 77 to 200K with and with out H 2 O and D 2 O. The TL is recorded for the virgin samples and also on irradiation of the same by exposing it to X-ray at 77K. The low temperature TL of X-ray irradiated two rice varieties Basmati and Gujarat-77 are discussed in this paper. The two varieties are given as X-ray dose of 1kGy. The TL is recorded for 200 mg rice powder, 200 mg rice powder + 0.5 cc of DM water, 200 mg rice powder + 0.5 cc of heavy water. The TL displayed for the 1kGy X-ray dose samples is around 113K with a broad shoulder around 153K. After adding DM water or heavy water as many as three new peaks are emerged. One main point to be noted is that the effect of water and heavy water on the specimens led to three more peaks one may be hump but the generation of 107K peak is interesting. The peak observed around 173K can be attributed to water and heavy water. The hump around 163K is the peak associated with rice. But the generation of other two peaks around 156K and 108K are to be analysed. It is also interesting to note that the 108K peak resolves well in water than that of heavy water. The initial results are interesting in nature. However the rice powder consists of many varieties of organic chemical constituents. Possible conclusions are drawn on comparing with the available literature on low temperature TL of rice powder. However, to pin point which chemical constituent of rice powder is absorbing/reacting with the added water and heavy water leads new LTTL peaks is very difficult at this stage. Table-1 is the LTTL peak temperatures and intensity of the studied samples. (author)

  19. Development of a highly precise ID-ICP-SFMS method for analysis of low concentrations of lead in rice flour reference materials.

    Science.gov (United States)

    Zhu, Yanbei; Inagaki, Kazumi; Yarita, Takashi; Chiba, Koichi

    2008-07-01

    Microwave digestion and isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-SFMS) has been applied to the determination of Pb in rice flour. In order to achieve highly precise determination of low concentrations of Pb, the digestion blank for Pb was reduced to 0.21 ng g(-1) after optimization of the digestion conditions, in which 20 mL analysis solution was obtained after digestion of 0.5 g rice flour. The observed value of Pb in a non-fat milk powder certified reference material (CRM), NIST SRM 1549, was 16.8 +/- 0.8 ng g(-1) (mean +/- expanded uncertainty, k = 2; n = 5), which agreed with the certified value of 19 +/- 3 ng g(-1) and indicated the effectiveness of the method. Analytical results for Pb in three brown rice flour CRMs, NIST SRM 1568a, NIES CRM 10-a, and NIES CRM 10-b, were 7.32 +/- 0.24 ng g(-1) (n = 5), 1010 +/- 10 ng g(-1) (n = 5), and 1250 +/- 20 ng g(-1) (n = 5), respectively. The concentration of Pb in a candidate white rice flour reference material (RM) sample prepared by the National Metrology Institute of Japan (NMIJ) was observed to be 4.36 +/- 0.28 ng g(-1) (n = 10 bottles).

  20. The effect of extrusion and drying on roller techniques concerning the rheological characteristics of rice-, corn-, sweet potato-, bean- and cassava root- and leaf- based composite flour

    Directory of Open Access Journals (Sweden)

    Johanna Aristizábal Galvis

    2013-01-01

    Full Text Available Promoting food security in Latin-America and the Caribbean is directly related to agricultural products. The region faces a food crisis which has reduced large population groups’ access to food. This work contributes to the study of obtaining precooked composite flour made from biofortified crops using protein, vitamin A and/or minerals. This study evaluated the effect of precooked flour’s composition and precooking on its solubility in water, water absorption capacity, consistency and viscosity; such flour was obtained by extrusion and drying on rollers. The composite flours were obtained from cassava roots, sweet potato tubers, corn, rice and bean grains and cassava leaves. Four composite flours were formulated taking four- to six-year-old children’s daily nutrient requirements (protein, iron, zinc and beta-carotenes as a basis. The extruder was operated at 90ºC, 300 rpm screw rotation speed, 17.64 g/min feed flow, with 30% moisture mixture. The dryer rollers were operated at 4 rpm roller rotation speed, 90ºC surface temperature and 1 mm separation between rollers. It was determined that flour dried on rollers led to more complete cooking and modified starch granule structure than precooking by extrusion, thereby producing flour having greater solubility in water, less water absorption, higher consistency and smaller viscosity, comparable to that of pattern flour.

  1. PENGARUH RASIO TEPUNG BERAS DAN AIR TERHADAP KARAKTERISTIK KULIT LUMPIA BASAH [Effect of Flour to Water Ratio on Characteristics of Fresh Rice-Based Spring Rolls Wrappers

    Directory of Open Access Journals (Sweden)

    Anna Ingani Widjajaseputra1*

    2011-12-01

    Full Text Available Flour to water ratio in batter compositions affected water availability which was needed to provide physical and chemical changes during fresh rice-based spring rolls wrappers processing, such as gel forming of starches and heat-induced gels, flour’s components interactions in batter systems. Degree of water-starch, water-protein and protein–starch-water interactions were depend on water amount, temperature and duration of heating. The mechanical strength of spring rolls wrappers is one of problems when it is being used. The wrappers could be torn apart due to moisture absorption from the filling and the environment. The goal of this study was to determine the optimum flour to water ratio in formulation of fresh rice-based spring rolls wrappers. The investigation was provided by Randomized Completely Block Design with single factor and three replicates. The factor was rice flour to water ratio in six levels (3.0:4.5; 3.0:5.0;3.0:5.5; 3.0:6.0; 3.0:6.5; and 3.0:7.0 the data were analyzed by Analysis of Variance with 95% degree of confident. Flour to water ratio greatly influenced elongation at break which is important in the utilization of fresh rice-based spring rolls wrappers. Its ratio also influenced the size of swelled rice starch granules, pores size and moisture content of the products. Optimal ratio flour to water is 3.0:6.0 which produced the highest elongation at break.

  2. Consumer-based optimization of a third-generation product made from peanut and rice flour.

    Science.gov (United States)

    Choi, I-D; Phillips, R D; Resurreccion, A V A

    2007-09-01

    Indirectly puffed snacks were produced by an extrusion process with partially defatted (12% fat) peanut flour (30%, 40%, 50%) at different levels of screw speed (200, 300, 400 rpm) and feed rate (4, 5, 6 kg/h). Extrudates were dried to obtain half-products (11% to 12% MC) followed by puffing with deep-fat frying. The puffed snack prototypes were subjected to consumer acceptance test. Consumers rated higher than 6.0 (= like slightly) for all products produced within the experimental factor ranges on the attributes of crispness and texture, whereas consumer scores for appearance, color, flavor, and overall liking were lower than 6.0 for the product containing 50% peanut flour regardless of screw speed and feed rate. The product extruded with 50% peanut flour at screw speed of 400 rpm and feed rate of 6 kg/h received the lowest score of 5.5 on overall liking in a 9-point hedonic score. Predicted regression models indicated that feed rate had the largest effect on consumer attributes followed by peanut flour and screw speed. From the superimposed contour plot of individual contour plot of consumer attributes, the optimum region was identified as the area beginning at the 42.0% to 43.0% peanut flour and 4.0 kg/h feed rates, rising to a maximum at 45% peanut flour and 4.6 kg/h feed rates and decreasing to the 33.0% to 34.0% peanut flour and 6.0 kg/h feed rates. Verification confirmed the ability of predictive regression models to identify peanut-based snacks, which would be scored higher than 6.0 by consumer evaluation.

  3. Improvement of physical properties of gluten-free steamed cake based on black waxy rice flour using different hydrocolloids.

    Science.gov (United States)

    Itthivadhanapong, Pimchada; Jantathai, Srinual; Schleining, Gerhard

    2016-06-01

    This study aimed to compare the effects of 1 % addition of four selected hydrocolloids (xanthan, guar, hypdroxypropylmethylcellulose and carrageenan) on quality characteristics of batter and of black waxy rice steamed cake compared to a control without hydrocolloids. Dynamic frequency sweeps of the batters at 25 °C indicated that all formulations exhibited gel-like behaviour with storage moduli (G') higher than loss moduli (G″). Hydrocolloids increased the apparent viscosity and the thixotropic behaviour, depending on the type of hydrocolloids. Xanthan had the greatest effects on both moduli, whereas carrageenan had the smallest effects. During a storage period of 4 days the cakes with xanthan remained softer than control samples. The overall acceptability of cake with xanthan and guar were higher than control. This study is the first report on using black waxy rice flour as a main raw material in gluten free cake. The results of this study provided useful information for selection hydrocolloids as ingredients that can help to improve the physical properties of waxy rice steamed cake.

  4. Accurate Measurement of Pasting Temperature by the Rapid Visco-Analyser: a Case Study Using Rice Flour

    Directory of Open Access Journals (Sweden)

    Jin-song BAO

    2008-03-01

    Full Text Available Pasting properties are among the most important characteristics of starch, determining its applications in food processing and other industries. Pasting temperature derived from the Rapid Visco-analyser (RVA (Newport Scientific, in most cases, is overestimated by the Thermocline for Windows software program. Here, two methods facilitating accurate measurement of pasting temperature by RVA were described. One is to change parameter setting to ‘screen’ the true point where the pasting viscosity begins to increase, the other is to manually record the time (T1 when the pasting viscosity begins to increase and calculate the pasting temperature with the formula of (45/3.8×(T1–1+50 for rice flour. The latter method gave a manually determined pasting temperature which was significantly correlated with the gelatinization temperature measured by differential scanning calorimetry.

  5. Complexation of rice starch/flour and maize oil through heat moisture treatment: Structural, in vitro digestion and physicochemical properties.

    Science.gov (United States)

    Chen, Xu; He, Xiaowei; Fu, Xiong; Zhang, Bin; Huang, Qiang

    2017-05-01

    This study investigated structural, in vitro digestion and physicochemical properties of normal rice starch (NRS)/flour (NRF) complexed with maize oil (MO) through heat-moisture treatment (HMT). The NRS-/NRF-MO complex displayed an increased pasting temperature and a decreased peak viscosity. After HMT, less ordered Maltese and more granule fragments were observed for NRS-/NRF-MO complex. Meanwhile, more aggregation was observed in the HMT samples with higher moisture contents. We found that higher onset temperature, lower enthalpy change and relative crystallinity of the NRS-/NRF-MO complex were associated with a higher moisture content of HMT samples. The higher moisture content of HMT was also favorable for the amylose-lipid complex formation. Differences in starch digestion properties were found for NRS-MO and NRF-MO complex. All of the NRS/NRF complexed MO after cooking showed lower rapidly digestible starch (RDS) contents compared with the control sample, therein NRS-/NRF- MO 20% exhibited the highest sum of the slowly digestible starch and resistant starch contents. In general, HMT had a greater impact on the in vitro digestion and physicochemical properties of flour samples compared with starch counterparts. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Enzymatic hydrolysis of Amaranth flour - differential scanning calorimetry and scanning electron microscopy studies

    Energy Technology Data Exchange (ETDEWEB)

    Barba de la Rosa, A.P.; Paredes-Lopez, O.; Carabez-Trejo, A.; Ordorica-Falomir, C. (Instituto Politecnico Nacional, Irapuato (Mexico). Centro de Investigacion y de Estudios Avanzados)

    1989-11-01

    High-protein amaranth flour (HPAF) and carbohydrate rich fraction (CRF) were produced from raw flour in a single-step process using a heat-stable alpha-amylase preparation. Protein content of flour increased from 15 to about 30 or 39% at liquefaction temperatures of 70 or 90{sup 0}C, respectively and 30 min hydrolysis time. CRF exhibited 14-22 DE. Enzymatic action at 70{sup 0}C increased endotherm temperature and gelatinization enthalpy of HPAF, in relation to gelatinized flour, as assessed by differential scanning calorimetry (DSC). Hydrolysis at 90{sup 0}C did not affect significantly (P > 0.05) DSC peak temperature. It is suggested that these changes in DSC performance might result from differences in amount and type of low-molecular weight carbohydrates and residual starch. Scanning electron microscopy (SEM) demonstrated that hydrolysis temperature changed substantially the structural appearance of flour particles. HPAF and CRF might find applications as dry milk extender and sweetener, respectively. (orig.).

  7. [Obtention and evaluation of a precooked flour of auyama (Cucurbita maxima) and rice, enriched with oleaginous proteins and/or skim milk].

    Science.gov (United States)

    Garrido de Cayuela, R; Guaipo, B; Villavicencio, D

    1988-03-01

    The purpose of the present study was the production of a precooked blend made of pumpkin squash and rice flour (PRB), processed with drum dyer. The blend was supplemented with different protein sources: soy, sesame and deffated milk. The following formulations were obtained: I) PRB + 10.5% deffated soy flour; II) PRB + 15% deffated milk; III) PRB + 5% deffated sesame flour + 10% deffated milk; IV) PRB + 5% deffated soy flour + 10% deffated sesame flour, and V) PRB + 9.5% deffated soy flour + 9.5% deffated milk. All formulations were submitted to physico-chemical, nutritional and sensorial evaluation. The protein content of the formulations varied from 14.6% to 17.9%. Rat assays gave satisfactory net protein ratio values. Soups prepared with the formulations were qualified as having good organoleptic characteristics. The production of some of the formulations described above, would contribute to a larger utilization of pumpkin, as it would allow the easy preparation of salted and sweet dishes (soups, cakes, etc).

  8. Electrothermal vaporization inductively coupled plasma-mass spectrometry for the determination of Cr, Cu, Cd, Hg and Pb in rice flour

    International Nuclear Information System (INIS)

    Li, P.-C.; Jiang, S.-J.

    2003-01-01

    Ultrasonic slurry sampling (USS)-electrothermal vaporization (ETV) dynamic reaction cell TM (DRC) inductively coupled plasma-mass spectrometry (ICP-MS) has been applied to determine Cr, Cu, Cd, Hg and Pb in rice samples. The influences of instrument operating conditions and slurry preparation on the ion signals were reported. Ascorbic acid was used as a modifier to enhance the ion signals. The background ions at the chromium masses were reduced in intensity significantly by using 0.4 ml min -1 NH 3 as reaction cell gas in the dynamic reaction cell while a q value of 0.6 was used. Since the sensitivities of Cr, Cu, Cd, Hg and Pb in rice flour slurry and aqueous solution were quite different, standard addition and isotope dilution methods were used for the determination of Cr, Cu, Cd, Hg and Pb in these rice samples. This method has been applied to the determination of Cr, Cu, Cd, Hg and Pb in NIST SRM 1568a rice flour reference material and two rice samples purchased from the market. The analytical results for the reference material agreed with the certified values. The results for the rice samples for which no reference values were available were also found to be in good agreement between the isotope dilution and standard addition methods. The method's detection limits estimated from the standard addition plots were about 0.44, 1.7, 0.4, 0.53 and 0.69 ng g -1 for Cr, Cu, Cd, Hg and Pb, respectively, in the original rice flour

  9. red flour beetle

    African Journals Online (AJOL)

    STORAGESEVER

    2009-12-01

    Dec 1, 2009 ... 2Institute of Biochemistry and Biotechnology, University of the Punjab, Lahore, Pakistan. 3Department of ... most important energy source around the globe ... T. castaneum (red flour beetle) samples were collected from rice.

  10. Active biodegradable films produced with blends of rice flour and poly(butylene adipate co-terephthalate): effect of potassium sorbate on film characteristics.

    Science.gov (United States)

    Sousa, G M; Soares Júnior, M S; Yamashita, F

    2013-08-01

    The objective of work was to produce and characterize biodegradable films from rice flour, poly(butylene adipate co-terephthalate) (PBAT), glycerol and potassium sorbate, for application as active packaging for fresh lasagna pasta. The films were evaluated with respect to their optical, water vapor barrier, mechanical and microstructural properties. The mechanical properties and microstructure were evaluated after use as packaging material for fresh pasta for 45 days at 7°C. The blends of rice flour, PBAT, glycerol and potassium sorbate showed good processability and allowed for the pilot scale production of films by blow extrusion process. The addition of 1 to 5% potassium sorbate as plasticizer agent of films in place of glycerol did not alter the film mechanical properties and a sorbate concentration greater or equal than 3% reduced the opacity, although increasing the water vapor permeability. The films could be used as active packaging for fresh food pasta, since they remained integral and easy to handle after application. The rice flour was shown to be an excellent material for the formulation of biodegradable films, since it is a low-cost raw material from a renewable source. The addition of potassium sorbate did not affect the extrusion process, and could be used in the production of packaging for use with foods. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. CCQM-K108.2014: determination of arsenic species and total arsenic in brown rice flour

    Science.gov (United States)

    Inagaki, K.; Narukawa, T.; Hioki, A.; Miyashita, S.; Long, S. E.; Ellisor, M. B.; Peng, S. L.; Dewi, F.; Shin, R.; Kapp, T.; Wai-hong, F.; Hei-shing, C.; Chao, W.; Kaewkhomdee, N.; Taebunpakul, S.; Thiengmanee, U.; Yafa, C.

    2017-01-01

    The key comparison CCQM-K108.2014 was organised by the Inorganic Analysis Working Group (IAWG) of CCQM to test the abilities of the national metrology institutes (NMIs) or the designated institutes (DIs) to measure the mass fractions of inorganic arsenic (i-As, sum of the amount of arsenite [As(III)] and arsenate [As(V)]), dimethylarsinic acid (DMAA), and total arsenic (total As) in brown rice flour. This was the follow-up comparison for the CCQM-K108 & CCQM-P147 (Cd, As, inorganic arsenic, and DMAA in brown rice flour). For total As, no strong outliers among the reported values were observed, and the distribution of the results was narrow, within 3% around the median. For i-As and DMAA, the distributions of the results were slightly wider than that for total arsenic, but no strong outliers among the reported values of i-As and DMAA were observed. Two potentially bias sources, an extraction efficiency of As species (the ratio of the sum of i-As and DMAA to total As) and the quality of primary standard of DMAA, were discussed. The extraction efficiency was estimated as the ratio of the sum of i-As and DMAA to total As. In the previous comparison (CCQM-K108 & CCQM-P147), the extraction efficiency was one of the largest bias sources for i-As and DMAA. However, in this study, all the extraction efficiencies estimated from the reported values were close to 100 %. Regarding the quality of the primary standard solutions, no significant difference was observed among the primary standard solution used by the participants. These results suggest the two potential bias sources mentioned above would not have been majors in this study, and then the technical issues in the previous comparison had been overcome. Accounting for relative expanded uncertainty, a comparability of measurement was successfully demonstrated by the participating NMIs and DIs for the measurement of total As at the level of less than 0.7 mg/kg, i-As at the level of less than 0.6 mg/kg, and DMAA at the level

  12. Effect of glutinous rice flour and dried egg white in fabrication of porous cordierite by gel casting method

    Directory of Open Access Journals (Sweden)

    A. Kamil Fakhruddin

    Full Text Available Abstract In this study, cordierite was produced using MgO, SiO2 and Al2O3 as raw materials through glass route method. The raw materials were mixed for 6 h and the mixture was melted at 1550 °C and then water quenched. The glass produced was milled for 5 h to obtain fine powder, which was used to prepare porous cordierite through gel casting method. The effect of addition of different natural binders, glutinous rice flour (GRF and dried egg white (DEW, on porous cordierite was investigated. GRF and DEW were added to the slurry during mixing. The synthesized cordierite powder was analyzed by X-ray diffraction. Porous cordierite was characterized through Archimedes method, morphological analysis, and compression test. The porosity level varied from 60.6% to 78.7% depending on the amount of natural binder added. Compression test results showed that the compressive strength of porous cordierite increased with increasing amount of natural binder added.

  13. Response surface methodology for evaluation and optimization of process parameter and antioxidant capacity of rice flour modified by enzymatic extrusion.

    Science.gov (United States)

    Xu, Enbo; Pan, Xiaowei; Wu, Zhengzong; Long, Jie; Li, Jingpeng; Xu, Xueming; Jin, Zhengyu; Jiao, Aiquan

    2016-12-01

    For the purpose of investigating the effect of enzyme concentration (EC), barrel temperature (BT), moisture content (MC), and screw speed (SS) on processing parameters (product temperature, die pressure and special mechanical energy (SME)) and product responses (extent of gelatinization (GE), retention rate of total phenolic content (TPC-RR)), rice flour extruded with thermostable α-amylase was analyzed by response surface methodology. Stepwise regression models were computed to generate response surface and contour plots, revealing that both TPC-RR and GE increased as increasing MC while expressed different sensitivities to BT during enzymatic extrusion. Phenolics preservation was benefited from low SME. According to multiple-factor optimization, the conditions required to obtain the target SME (10kJ/kg), GE (100%) and TPC-RR (85%) were: EC=1.37‰, BT=93.01°C, MC=44.30%, and SS=171.66rpm, with the actual values (9.49kJ/kg, 99.96% and 87.10%, respectively) showing a good fit to the predicted values. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  14. Development and Validation of a Multiresidue Method for the Determination of Pesticides in Dry Samples (Rice and Wheat Flour) Using Liquid Chromatography/Triple Quadrupole Tandem Mass Spectrometry.

    Science.gov (United States)

    Grande-Martínez, Ángel; Arrebola, Francisco Javier; Moreno, Laura Díaz; Vidal, José Luis Martínez; Frenich, Antonia Garrido

    2015-01-01

    A rapid and sensitive multiresidue method was developed and validated for the determination of around 100 pesticides in dry samples (rice and wheat flour) by ultra-performance LC coupled to a triple quadrupole mass analyzer working in tandem mode (UPLC/QqQ-MS/MS). The sample preparation step was optimized for both matrixes. Pesticides were extracted from rice samples using aqueous ethyl acetate, while aqueous acetonitrile extraction [modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) method] was used for wheat flour matrixes. In both cases the extracts were then cleaned up by dispersive solid phase extraction with MgSO4 and primary secondary amine+C18 sorbents. A further cleanup step with Florisil was necessary to remove fat in wheat flour. The method was validated at two concentration levels (3.6 and 40 μg/kg for most compounds), obtaining recoveries ranging from 70 to 120%, intraday and interday precision values≤20% expressed as RSDs, and expanded uncertainty values≤50%. The LOQ values ranged between 3.6 and 20 μg/kg, although it was set at 3.6 μg/kg for the majority of the pesticides. The method was applied to the analysis of 20 real samples, and no pesticides were detected.

  15. Rheoviscometric measurements on starch, flour and black pepper treated by electron-beam and microwaves

    International Nuclear Information System (INIS)

    Ferdes, O.S.; Tirlea, A.; Badea, M.; Casandroiu, T.; Oprita, N.

    1998-01-01

    Irradiation was performed with an ALIN-7 linac within the dose range of 0 to 16 kGy at a dose rate of approximately 1.5 kGy/min. The samples were accommodated in a cavity which was also used for the microwave treatment. The microwave irradiation was carried out inside a special designed system using a 2.45 GHz CW magnetron of 850 W maximum output power. The samples were treated using various power values for irradiation periods varying between 10 and 120 s. Combined treatment by both methods was also applied. The rheoviscometric measurements were carried out on gelified suspensions of starch, flour and black pepper in equivalent starch concentration conditions. For the black pepper suspensions the pH value was adjusted to more than 12 units by adding 33 % NaOH solution. The effects of electromagnetic field and irradiation on starch, flour and pepper were described in terms of apparent viscosity and shear stress. All the samples investigated exhibited similar rheoviscometric behaviour, which can be attributed to starch degradation caused by microwave and electron-beam irradiation, the latter having a more significant effect on the rheological properties. Some consideration were also made concerning the thermal and non-thermal effects of microwaves and of the combined (e-beam and microwave) treatments of starch, flour and pepper

  16. Processing and characterization of extruded breakfast meal formulated with broken rice and bean flour

    OpenAIRE

    Ana Vânia Carvalho; Rafaella de Andrade Mattietto; Priscila Zaczuk Bassinello; Selma Nakamoto Koakuzu; Alessandro de Oliveira Rios; Renan de Almeida Maciel; Rosangela Nunes Carvalho

    2012-01-01

    The objective of this work was to develop an extruded breakfast product containing broken rice and split old beans and to verify the influence of the extrusion process on their physicochemical, technological, and sensory characteristic. The final product had a protein content of 9.9 g.100 g-1, and therefore it can be considered a good source of proteins for children and teenagers. The dietary fiber content of the final edible product was 3.71 g.100 g-1. Therefore, the breakfast meal may be co...

  17. Processing and characterization of extruded breakfast meal formulated with broken rice and bean flour

    Directory of Open Access Journals (Sweden)

    Ana Vânia Carvalho

    2012-09-01

    Full Text Available The objective of this work was to develop an extruded breakfast product containing broken rice and split old beans and to verify the influence of the extrusion process on their physicochemical, technological, and sensory characteristic. The final product had a protein content of 9.9 g.100 g-1, and therefore it can be considered a good source of proteins for children and teenagers. The dietary fiber content of the final edible product was 3.71 g.100 g-1. Therefore, the breakfast meal may be considered as a source of dietary fiber according to Brazilian law . As for the technological properties, the extruded product presented an expansion index of 8.89 and apparent density of 0.25 g.cm-3. With regard to the sensory analysis, the acceptance average was ranked between 6.8 and 7.7, corresponding to the categories "liked slightly" and "liked very much". With regard to purchase intention, 79% of the panelists said they would certainly or possibly purchase the product. Broken rice and split old beans are interesting alternatives for the elaboration of extruded breakfast products presenting good nutritional, technological, and sensory qualities.

  18. Simultaneous and rapid determination of deoxynivalenol and its acetylate derivatives in wheat flour and rice by ultra high performance liquid chromatography with photo diode array detection.

    Science.gov (United States)

    Xu, Jiao-Jiao; Zhou, Jian; Huang, Bai-Fen; Cai, Zeng-Xuan; Xu, Xiao-Min; Ren, Yi-Ping

    2016-06-01

    A simple and reliable method of ultra high performance liquid chromatography coupled with photo-diode array detection has been proposed for the simultaneous determination of deoxynivalenol and its acetylated derivatives in wheat flour and rice, especially focusing on the optimization of sample extraction, cleanup, and chromatographic separation conditions. Sample pretreatment consisted of a first step using a quick, easy, cheap, effective, rugged, and safe based extraction procedure and a subsequent cleanup step based on solid-phase extraction. The method was extensively validated in wheat flour and rice, obtaining satisfactory analytical performance with good linearity (R(2) ≥ 0.999), acceptable recoveries (80.0-104.4%), and repeatability (RSDs 1.3-10.7%). The limits of detection (21.7-57.4 μg/kg) and quantitation (72.3-191.4 μg/kg) for deoxynivalenols were lower than those usually permitted by various countries' legislation in these food matrices. The method was applied to 34 wheat and rice samples. The results were further compared with results of ultra high performance liquid chromatography with electrospray ionization tandem mass spectrometry. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Analysis of radicals induced in irradiated cereal flour using ESR

    International Nuclear Information System (INIS)

    Kawamura, Shoei; Kishita, Keigo; Ukai, Mitsuko; Kikuchi, Masahiro; Kobayashi, Yasuhiko

    2013-01-01

    Using electron spin resonance (ESR) spectroscopy, we revealed radicals induced in cereal flour irradiated with gamma-ray or electron beam. Sample was wheat and rice. We detected a broad singlet signal at g = 2.0. It consists of a singlet signal and a triplet signal. It suggested that the singlet signal is originated from organic free radicals and the triplet signal is from 14 N. There were no differences of ESR spectra between irradiated wheat flour and rice flour. The signal intensity of radiation induced radical was tend to increase following with the increase of radiation dose level. After radiation treatment, relaxation time of radiation induced radical was changed during storage. T 1 was decreased and T 2 was increased. In this study, the relaxation time is calculated using the parameters obtained from the ESR signal. It is necessary to analyze the relaxation time directly with pulsed ESR spectroscopy in future. (author)

  20. PENGARUH FORMULASI PASTA LABU KUNING DAN TEPUNG BERAS KETAN PUTIH TERHADAP SIFAT KIMIA DAN SENSORI DODOL [The Effect of Formulation Pumpkin Paste and White Glutinous Rice Flour on Chemical and Sensory Properties Dodol

    OpenAIRE

    Hadi Hanggara; Sussi Astuti; Sri Setyani

    2016-01-01

    The objective of this research was to study the effect formulation between pumpkin pasta and white glutinous rice flour on chemical and sensory properties of dodol. The research was a single factor, arranged in a Complete Randomized Design with six replications. The factor was the formulation of pumpkin pasta and white glutinous rice flour consisted of four levels, i.e. 10 : 90 (L1); 20 : 80 (L2); 30 : 70 (L3); 40 : 60 (L4); 50 : 50 (L5); and 60 : 40 (L6).  The data were analyzed by using ANO...

  1. PENGARUH FORMULASI PASTA LABU KUNING DAN TEPUNG BERAS KETAN PUTIH TERHADAP SIFAT KIMIA DAN SENSORI DODOL [The Effect of Formulation Pumpkin Paste and White Glutinous Rice Flour on Chemical and Sensory Properties Dodol

    Directory of Open Access Journals (Sweden)

    Hadi Hanggara

    2016-03-01

    Full Text Available The objective of this research was to study the effect formulation between pumpkin pasta and white glutinous rice flour on chemical and sensory properties of dodol. The research was a single factor, arranged in a Complete Randomized Design with six replications. The factor was the formulation of pumpkin pasta and white glutinous rice flour consisted of four levels, i.e. 10 : 90 (L1; 20 : 80 (L2; 30 : 70 (L3; 40 : 60 (L4; 50 : 50 (L5; and 60 : 40 (L6.  The data were analyzed by using ANOVA and were further tested with LSD test at 5% level of significant. The results showed that the ratio of pumpkin paste and white glutinous rice flour significantly affected the chemical (moisture and sucrose contents and  sensory properties (texture, color, taste, flavor and overall acceptance of dodol.  The best formulation was found on dodol produced from 50% pumpkin paste and 50% white glutinous rice flour (L5 with the moisture content of 22,51%, sucrose content of 33,67%, total carotenoids content of 1,16 µg/g, fat content of 23,12%, with the texture score of 2,71 (rather elastic, color score of  3,97 (yellow-brown, taste score of 3,75 (feel pumpkin, flavor score of 3,50 (flavorful pumpkin and the overall acceptance of 3,51 (like. Keywords:  dodol, pumpkin, white glutinous rice

  2. Changes in Moisture, Protein, and Fat Content of Fish and Rice Flour Coextrudates during Single-Screw Extrusion Cooking

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Shahab Sokhansanj; Sukumar Bandyopadhyay; A. S. Bawa

    2013-02-01

    Changes in proximate composition of fish and rice flour coextrudates like moisture, protein, and fat content were studied with respect to extrusion process v ariables like barrel temperature, x1 (100–200 degrees C); screw speed, x2 (70–110 rpm); fish content of the feed, x3 (5–45 percent); and feed moisture content, x4 (20–60 percent). Experiments were conducted at five levels of the process variables based on rotatable experimental design. Response surface models (RSM) were developed that adequately described the changes in moisture, protein, and fat content of the extrudates based on the coeff icient of determination (R2) values of 0.95, 0.99, and 0.94. ANOVA analysis indicated that extrudate moisture content was influenced by x4, protein content by x1 and x3, and fat content by x3 and x4 at P < 0.001. Trends based on response surf ace plots indicated that the x1 of about 200 degrees C, x2 of about 90 rpm, x3 of about 25%, and x4 of about 20% minimized the moisture in the extrudates. Protein content was maximized at x1 of 100 degrees C, x2 > 80 rpm, x3 of about 45 percent, and x4 > 50 percent, and fat content was minimized at x1 of about 200 degrees C, x2 of about 85–95 rpm, x3 < 15 percent, and x4 of about >50 percent. Optimized process variables based on a genetic algorithm (GA) for minimum moisture and fat content and maximum protein content were x1 = 199.86, x2 = 109.86, x3 = 32.45, x4 = 20.03; x1 = 199.71, x2 = 90.09, x3 = 15.27, x4 = 58.47; and x1 = 102.97, x2 = 107.67, x3 = 44.56, x4 = 59.54. The predicted values were 17.52 percent, 0.57 percent, and 46.65 percent. Based on the RSM and GA analy sis, extrudate moisture and protein content was influenced by x1, x3, and x4 and fat content by x2, x3, and x4.

  3. Modificação enzimática da farinha de arroz visando a produção de amido resistente Enzymatic modification on rice flour seeking the production of resitant starch

    Directory of Open Access Journals (Sweden)

    Márcio Garcia Severo

    2010-01-01

    Full Text Available The aim of this work was to study the enzymatic modification on rice flour using lipase pancreatic and amyloglucosidase to obtain resistant starch. For this, Response Surface Methodology (RSM was used to determine the best operating conditions for each enzyme. For lypase pancreatic, the highest value for resistant starch (45% was achieved within 2 h reaction at pH 7 using an enzyme/substrate ratio of 4% (w/w and Dp= 100/200 tyler. For amyloglucosidase, optima conditions corresponded to an enzyme/substrate ratio of 0,006 mL/g and Dp= 100/200 tyler at 45 ºC, yielding 57% of resistant starch in 2 h reaction. These results show the potential of using both enzymes to modified rice flour, increasing the resistant starch in about 5.7 folds in relation to the flour without treatment (resistant starch=10.6%.

  4. Optimization of process parameters for extrusion cooking of low amylose rice flour blended with seeded banana and carambola pomace for development of minerals and fiber rich breakfast cereal.

    Science.gov (United States)

    Borah, Anjan; Lata Mahanta, Charu; Kalita, Dipankar

    2016-01-01

    The low-amylose rice flour, seeded banana (Musa balbisiana, ABB) and carambola (Averrhoa carambola L.) pomace blends were extruded to prepare ready to eat breakfast cereal in a single-screw extruder. Response surface methodology using a central composite design was used to evaluate effect of independent variables, namely blend ratio (80:10:10 - 60:30:10 of low-amylose rice flour, seeded banana and carambola pomace), screw speed (200 - 400 rpm), barrel temperature (90 - 130 (°)C) and feed moisture content (9 - 21 g/100 g, wet basis) on product responses. Quadratic polynomial equations were also obtained by multiple regression analysis. The predicted models were adequate based on lack-of-fit test and coefficient of determination obtained. The feed moisture content had critical effect on all response variables. The compromised optimal conditions obtained by numerical integration for development of extrudates were: screw speed of 350 rpm, barrel temperature of 120 (°)C, feed moisture content of 12 g/100 g and 65:25:10 of blend ratio of feed. In the optimized condition low-amylose rice blend is found to have better physicochemical properties (water absorption index of 481.79 g/100 g; water solubility index of 44.13 g/100 g) and dietary fiber content of 21.35 g/100 g respectively. The developed breakfast cereal showed considerable amount of minerals (Mg and K) and overall acceptability was found to be 7.8.

  5. Effects of rice batter on oil uptake and sensory quality coated fried okra.

    Science.gov (United States)

    Okra was coated and deep-fat fried with batters of flour sources, including rice flour, a mixture of rice flour, and small amounts of pregelatinized rice flour (PGRF), and, as a control, the traditional wheat flour. The addition of PGRF, up to 8%, enhanced batter viscosity and the coating properties...

  6. Evaluation of the effect of yellow konjac flour-κ-carrageenan mixed gels and red koji rice extracts on the properties of restructured meat using response surface methodology.

    Science.gov (United States)

    Widjanarko, Simon Bambang; Amalia, Qory; Hermanto, Mochamad Bagus; Mubarok, Ahmad Zaki

    2018-05-01

    In the present study, the effect of two independent variables, yellow konjac flour-κ-carrageenan (KFC) mixed gels and red koji rice (RKR) extracts for the development of restructured meat product, was investigated using central composite design of response surface methodology (RSM). The assessed physical characteristics were hardness, water holding capacity (WHC), and color (° hue ) of the restructured meat products. The second order regression models with high R 2 value were significantly fitted to predict the changes in hardness, WHC and color. The results showed that the predicted optimum formula of restructured meat were the addition of KFC mixed gels at 10.21% and RKR extracts at 6.11%. The experiments results validate these optimum formula and found to be not statistically different at 5% level. Thus, the RSM was successfully employed and can be used to optimize the formulation of restructured meat.

  7. Optimization of the production conditions of the lipase produced by Bacillus cereus from rice flour through Plackett-Burman Design (PBD) and response surface methodology (RSM).

    Science.gov (United States)

    Vasiee, Alireza; Behbahani, Behrooz Alizadeh; Yazdi, Farideh Tabatabaei; Moradi, Samira

    2016-12-01

    In this study, the screening of lipase positive bacteria from rice flour was carried out by Rhodamin B agar plate method. Bacillus cereus was identified by 16S rDNA method. Screening of the appropriate variables and optimization of the lipase production was performed using Plackett-Burman design (PBD) and response surface methodology (RSM). Among the isolated bacteria, an aerobic Bacillus cereus strain was recognized as the best lipase-producing bacteria (177.3 ± 20 U/ml). Given the results, the optimal enzyme production conditions were achieved with coriander seed extract (CSE)/yeast extract ratio of 16.9 w/w, olive oil (OO) and MgCl 2 concentration of 2.37 g/L and 24.23 mM, respectively. In these conditions, the lipase activity (LA) was predicted 343 U/mL that was approximately close to the predicted value (324 U/mL), which was increased 1.83 fold LA compared with the non-optimized lipase. The kinetic parameters of V max and K m for the lipase were measured 0.367 μM/min.mL and 5.3 mM, respectively. The lipase producing Bacillus cereus was isolated and RSM was used for the optimization of enzyme production. The CSE/yeast extract ratio of 16.9 w/w, OO concentration of 2.37 g/L and MgCl 2 concentration of 24.23 mM, were found to be the optimal conditions of the enzyme production process. LA at optimal enzyme production conditions was observed 1.83 times more than the non-optimal conditions. Ultimately, it can be concluded that the isolated B. cereus from rice flour is a proper source of lipase. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Report of the key comparison CCQM-K108 determination of arsenic species, total arsenic and cadmium in brown rice flour

    Science.gov (United States)

    Hioki, Akiharu; Narukawa, Tomohiro; Inagaki, Kazumi; Miyashita, Shinichi; Kotzeva, Boriana; Kakoulides, Elias; Sxoina, Vasiliki; Fung, W. H.; Choi, Y. Y.; Yau, H. P.; Tsoi, Y. T.; Lee, C. L.; Kong, M. F.; Shin, Richard; Juan, Wang; Sin Yee, Ng; Uribe, Christian; Marques Rodrigues, Janaína; Caciano de Sena, Rodrigo; Silva Dutra, Emily; Bergamaschi, Luigi; Giordani, Laura; D'Agostino, Giancarlo; Valiente, Liliana; Horvat, Milena; Jacimovic, Radojko; Oduor Okumu, Tom; Kang'Iri, Jacqueline; Owiti Orwa, Tabitha; Chao, Wei; Jingbo, Chao; Taebunpakul, Sutthinun; Yafa, Charun; Kaewkhomdee, Nattikarn; Chailap, Benjamat; Pharat, Yanee; Phukphattanachai, Pranee; Turk, Gregory C.; Long, Stephen; Murphy, K. E.; Davis, Clay; Ellisor, Michael; Merrick, Jeffrey; White, Ian; Saxby, David; Linsky, S. M.; Barzev, A.; Botha, A.

    2015-01-01

    The CCQM-K108 key comparison was organised by the Inorganic Analysis Working Group (IAWG) of CCQM to test the abilities of national metrology institutes (NMIs) or designated institutes (DIs) to measure the mass fractions of arsenic species, total arsenic and cadmium in brown rice flour. The National Metrology Institute of Japan (NMIJ) acted as the coordinating laboratory. The participants used different measurement methods, though most of them used inductively coupled plasma mass spectrometry (ICP-MS) or isotope-dilution inductively coupled plasma mass spectrometry (ID-ICP-MS) for Cd and ICP-MS for total arsenic. Regarding arsenic speciation, all participants used ICP-MS coupled with liquid chromatography (LC). Accounting for relative expanded uncertainty, comparability of measurement results for each of total arsenic and cadmium was successfully demonstrated by the participating NMIs or DIs for the measurement of the measurand at the level of less than 0.5 mg/kg. Regarding arsenic species (inorganic arsenic and dimethylarsinic acid (DMAA)), there was, however, a measurement problem still to be solved and that part of CCQM-K108 will be repeated. It is expected that arsenic, cadmium and other metals at mass fractions greater than approximately 0.1 mg/kg in rice flour can be determined by each participant using the same technique(s) employed for this key comparison to achieve similar uncertainties mentioned in the present report. Furthermore, the results of this key comparison can be utilised along with the IAWG core capability approach. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  9. Relationship between population growth of the red flour beetle Tribolium castaneum and protein and carbohydrate content in flour and starch.

    Science.gov (United States)

    Wong, Nellie; Lee, Chow-Yang

    2011-12-01

    The effects of eight diets (atta flour, wheat flour, self-rising flour, rice flour, custard powder, corn flour, tapioca starch, and potato starch) on the development of the red flour beetle, Tribolium castaneum (Herbst), reared at 29-31 degrees C and 66-70% RH were assessed. Five pairs of male and female T. castaneum were reared on the respective diets for 28 d before the experimental setup was dismantled and adult counts were recorded. In another experiment, the insects were allowed to mate and oviposit in each flour or starch type over a period of 7 d before being removed. The counting of pupae and adult emergence began on the day of emergence and was continued on a daily basis until day 140. Proximate analysis was performed for chemical composition of each diet, and the numbers of new adults that developed were found to be positively correlated (r2 = 0.97; P flour > wheat flour > self-rising flour > rice flour > custard powder > corn flour > tapioca starch > potato starch. T. castaneum larval development to the pupal and adult stages developed significantly faster in atta flour (P flour. Fewer adults emerged from wheat flour, self-rising flour, and rice flour, and no new emergences were recorded for the remaining diets. Developmental rate was much slower in beetles reared on diets in which a low number in progeny was produced. These data illustrate that different diets can influence the sustainability of these insects and affect their development and growth.

  10. Development of a certified reference material (NMIJ CRM 7531-a) for the determination of trace cadmium and other elements in brown rice flour.

    Science.gov (United States)

    Miyashita, Shin-ichi; Inagaki, Kazumi; Narukawa, Tomohiro; Zhu, Yanbei; Kuroiwa, Takayoshi; Hioki, Akiharu; Chiba, Koichi

    2012-01-01

    A certified reference material (CRM) for trace cadmium and other elements in brown rice flour was developed at the National Metrology Institute of Japan (NMIJ). The CRM was provided as a dry powder after drying and frozen pulverization of fresh brown rice obtained from a Japanese domestic market. Characterization of the property value for each element was carried out exclusively by NMIJ with at least two independent analytical methods, including inductively coupled plasma mass spectrometry (ICP-MS), ICP high-resolution mass spectrometry, isotope-dilution ICP-MS, ICP optical emission spectrometry, and graphite-furnace atomic-absorption spectrometry. Property values were provided for six elements (Mn, Fe, Cu, Zn, As, and Cd). The concentration range of the property values was from 0.280 mg kg(-1) of As to 31.8 mg kg(-1) of Zn. The combined relative standard uncertainties of the property values were estimated by considering the uncertainties of the homogeneity, characterization, difference among analytical methods, dry-mass correction factor, and calibration standard. The range of the relative combined standard uncertainties was from 1.1% of Zn to 1.6% of As.

  11. Production of lipopeptides by Bacillus amyloliquefaciens XZ-173 in solid state fermentation using soybean flour and rice straw as the substrate.

    Science.gov (United States)

    Zhu, Zhen; Zhang, Guoyi; Luo, Yi; Ran, Wei; Shen, Qirong

    2012-05-01

    This work was aimed to produce lipopeptides by Bacillus amyloliquefaciens XZ-173 in solid state fermentation using agro-industrial byproducts. A central composite design was used to get the highest lipopeptides production. Results revealed that the optimal conditions for maximum lipopeptides production were 1.79% starch and 1.91% yeast extract by employing 5.58 g soybean flour and 3.67 g rice straw as the solid substrate with initial pH 7.5, moisture content 55% and a 10% inoculum level at 30°C for 2 days. Under these conditions, the experimental yield of lipopeptides reached 50.01 mg/gds, which was very close to the predicted value (49.91 mg/gds). At high concentration, the lipopeptides extracted from fermented substrates showed strong antibiotic activity against Rhizoctonia solani and Ralstonia solanacearum and certain emulsification but good emulsion stability. This is the first report on lipopeptides production that uses rice straw as a major substrate. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. The impact of extrusion on the nutritional composition, dietary fiber and in vitro digestibility of gluten-free snacks based on rice, pea and carob flour blends.

    Science.gov (United States)

    Arribas, C; Cabellos, B; Sánchez, C; Cuadrado, C; Guillamón, E; Pedrosa, M M

    2017-10-18

    Consumers and the food industry are demanding healthier products. Expanded snacks with a high nutritional value were developed from different rice, pea and carob flour blends. The proximate composition, starch (total and resistant), amylose and amylopectin, dietary fiber (soluble and insoluble) contents, and the in vitro protein digestibility of different rice-legume formulations, were evaluated before and after the extrusion process. Compared with the corresponding non-extruded blends (control), the extrusion treatment did not change the total protein content, however, it reduced the soluble protein (61-86%), the fat (69-92%) and the resistant starch contents (100%). The total starch content of all studied blends increased (2-19%) after extrusion. The processing increased the in vitro protein digestibility, reaching values around 88-95% after extrusion. Total dietary fiber was reduced around 30%, and the insoluble fraction was affected to a larger extent than the soluble fraction by the extrusion process. Because of its balanced nutritional composition, high dietary fiber content, as well as low energy density, these novel gluten-free snack-like foods could be considered as functional foods and a healthier alternative to commercially available gluten-containing or gluten-free and low nutritional value snacks.

  13. A study on flexural and water absorption of surface modified rice husk flour/E-glass/polypropylene hybrid composite

    Science.gov (United States)

    Rassiah, K.; Sin, T. W.; Ismail, M. Z.

    2016-10-01

    This work is to study the effects of rice husk (RH)/E-Glass (EG)/polypropylene (PP) hybrid composites in terms of flexural and water absorption properties. The tests conducted are the flexural test and also the water absorption test using two types of water: distilled and sea water. The hybrid composites are prepared with various ratios of fibre weight fractions and the rice husk is treated using 2% Sodium Hydroxide (NaOH) to improve interaction and adhesion between the non-polar matrix and the polar lignocellulosic fibres. It was found that the content of rice husk/E-Glass fillers affected the structural integrity and flexural properties of hybrid composites. In addition, a higher ratio of rice husk contributes to higher water absorption in the hybrid composites.

  14. Characterization of peeled and unpeeled almond (Prunus amygdalus) flour after electron beam processing

    Science.gov (United States)

    Lanza, C. M.; Mazzaglia, A.; Paladino, R.; Auditore, L.; Barnà, R. C.; Loria, D.; Trifirò, A.; Trimarchi, M.; Bellia, G.

    2013-05-01

    Flours of unpeeled and peeled almond seeds have been irradiated with ionising radiation at 1.5 kGy dose by means of 5 MeV energy electron beam. The effects of ionising radiation have been studied concerning microbiological parameters, such as total mesophilic counts, mould, yeast, enterobacters, coliform bacteria, as well as physicochemical parameters, free fatty acid, peroxide number, humidity, activity water, aflatoxin, pesticides, and sensory evaluation of attributes regarding only appearance, olfactory and rheological aspects in accordance with the prescription of Italian laws about the consumption of irradiated food. The results, compared with non-irradiated samples from the same supply, show a sharp decrease of pathogen loads while no significant variations of physicochemical parameters and sensory descriptors have been noticed. These results indicate that irradiation at 1.5 kGy dose, lower than values usually reported in literature, seems to be still a suitable sanitation treatment to extend the shelf-life of this kind of foodstuff while maintaining its nutritional, safe and sensory characteristics.

  15. Characterization of peeled and unpeeled almond (Prunus amygdalus) flour after electron beam processing

    International Nuclear Information System (INIS)

    Lanza, C.M.; Mazzaglia, A.; Paladino, R.; Auditore, L.; Barnà, R.C.; Loria, D.; Trifirò, A.; Trimarchi, M.; Bellia, G.

    2013-01-01

    Flours of unpeeled and peeled almond seeds have been irradiated with ionising radiation at 1.5 kGy dose by means of 5 MeV energy electron beam. The effects of ionising radiation have been studied concerning microbiological parameters, such as total mesophilic counts, mould, yeast, enterobacters, coliform bacteria, as well as physicochemical parameters, free fatty acid, peroxide number, humidity, activity water, aflatoxin, pesticides, and sensory evaluation of attributes regarding only appearance, olfactory and rheological aspects in accordance with the prescription of Italian laws about the consumption of irradiated food. The results, compared with non-irradiated samples from the same supply, show a sharp decrease of pathogen loads while no significant variations of physicochemical parameters and sensory descriptors have been noticed. These results indicate that irradiation at 1.5 kGy dose, lower than values usually reported in literature, seems to be still a suitable sanitation treatment to extend the shelf-life of this kind of foodstuff while maintaining its nutritional, safe and sensory characteristics. - Highlights: ► Examine physical chemical and sensory changes on irradiated almond. ► Increase the information on irradiation treatment at low doses. ► Contribute to broaden the use of this technology in the food

  16. Sensory, digestion, and texture quality of commercial gluten-free bread: Impact of broken rice flour type.

    Science.gov (United States)

    Feizollahi, Ehsan; Mirmoghtadaie, Leila; Mohammadifar, Mohammad Amin; Jazaeri, Sahar; Hadaegh, Haleh; Nazari, Bahman; Lalegani, Sajjad

    2018-02-08

    This research investigated the effects of two varieties of broken rice (Khouzestan and Lenjan) from warm and dry regions, and two (Hashemi and Tarom) from mild and humid regions on different parameters including dough rheology, digestibility, and quality (color, specific volume, textural properties, and sensorial properties) of a commercial gluten-free bread (GFB). Furthermore, the rice varieties' hydration properties, gelatinization temperatures, and starch-granule morphology were assessed. Significant differences were observed in the varieties' proximate composition and hydration properties from both climate zones. The granules' average size was 3.17-4.9 µm. The specific volume of the breads showed no correlation with either the damaged starch content or the amylose content, but had a significant negative correlation with hardness (r = -.923, p production. Moreover, it was determined that the rice varieties currently used in commercial manufacture of gluten-free bread do not necessarily yield the highest-quality bread. Gluten-free breads (GFBs) are generally used by Coeliac patients. In comparison to wheat bread, the quality of GFBs is lower. Rice is one of the main ingredients of GFBs' formulation, thence by determining the quality-related features of the rice, improvement in the final product could be achieved. In addition, by implementing the cheap and the broken rice variety, the price of the final product could be decreased and be more affordable for the patients. © 2018 Wiley Periodicals, Inc.

  17. 'The effect of inulin addition on structural and textural properties of extruded products under several extrusion conditions': The effect of inulin addition on structural and textural properties of rice flour extrudates.

    Science.gov (United States)

    Tsokolar-Tsikopoulos, Konstantinos C; Katsavou, Ioanna D; Krokida, Magdalini K

    2015-10-01

    The growing consumer demand for healthy snacks has turned the interest of industry and research in the development of new ready-to-eat products, enriched with dietary fibers. Inulin is a soluble fiber with a neutral taste that promotes the good function of the intestine. Rice flour extrudates were produced under various extrusion temperatures, screw speeds, feed moisture concentrations and inulin replacement levels. The objective of this study was to investigate the effect of the material characteristics and the extrusion conditions on the structural and textural properties of the extrudates. Simple mathematical models were used for properties correlation with process conditions and through regression analysis it was revealed that there is a significant effect of extrusion temperature, screw speed, feed moisture content and inulin concentration on the final properties. Both density and maximum stress increased when moisture content and inulin concentration increased, while they decreased when extrusion temperature and screw speed increased. These results were also strengthened by scanning electron microscopy. The highest expansion ratio was presented when decreasing all process conditions apart from screw speed.

  18. Sensory, Digestion and Texture Quality of Commercial Gluten-Free Bread: Impact of Broken Rice Flour Type

    DEFF Research Database (Denmark)

    Feizollahi, Ehsan; Mirmoghtadaie, Leila; Mohammadifar, Mohammad Amin

    2018-01-01

    This research investigated the effects of two varieties of broken rice (Khouzestan and Lenjan) from warm and dry regions, and two (Hashemi and Tarom) from mild and humid regions on different parameters including dough rheology, digestibility and quality (color, specific volume, textural propertie...

  19. DNA comet assay for rice seeds treated with low energy electrons ('soft-electrons')

    International Nuclear Information System (INIS)

    Todoriki, Setsuko; Hayashi, Toru

    1999-01-01

    As rice seeds are sometimes contaminated with phytopathogenic organisms such as blast disease fungi and nematodes, a novel non-chemical disinfection method for rice seeds is highly required. In order to develop a disinfection method, the effect of low energy electron ('soft-electrons') on seed DNA was examined by using the neutral comet assay. Rice seeds (whole grain) were treated with electrons of different acceleration voltages (180 kV to 1 MV) at a dose of 5 kGy. Nucleus suspensions were prepared from whole brown rice and subjected to electrophoresis. DNA from un-irradiated (control) seeds relaxed and produced comets with a short tail, most of the comets distributed within the range of comet length between 30 μm to 70 μm. In the case of seeds treated with electrons at acceleration voltages up to 190 kV, cells without seed coats were not damaged and the frequency histograms of comet length showed almost the same pattern as that for control. At acceleration voltages higher than 200 kV, the cells were distributed into two categories; DNA comets with a short tail (with little DNA damages, less than 70 μm in the comet length) and DNA comets with long tails (with sever strand breaks, more than 130 μm in the comet length). The ratios of damaged cells increased with increasing acceleration voltage. The growths of rice seedlings were not affected by the treatment with electrons at up to 200 kV. On the contrary, the cells of gamma-irradiated seed showed small variations in the comet length, and which were depending on radiation dose. The individual cells of gamma-irradiated seeds at 1 kGy showed shorter comet than the damaged cells with soft electron, seed treated with gamma rays (1-5 kGy) did not shoot nor root. (author)

  20. Studies on the Preparation of Aglutenic Foam Type of Pastry Product Using Different Flour Combinations

    Directory of Open Access Journals (Sweden)

    Simona Man

    2014-11-01

    Full Text Available The study aimed to obtain a mechanically loose gluten free pastry (leaf roulade by using gluten-free flour: corn flour and rice flour and cornstarch. The samples obtained were compared with a control sample of only wheat flour. To optimize the recipe were made ​​four experimental variants, flour and starch is used in different proportions. Version 1 (control sample who used wheat flour WF in 100%, Version 2 consisting of 20% maize flour (MF, 16 % rice flour (RF, 64% corn starch (CS; Version 3 consisting of: 10% of maize flour (MF, 10% of rice flour (RF, 80% corn starch (CS. The experimental variants was analyzed for physico-chemical: length, width, thickness, specific gravity, moisture and carbohydrates. The sensory attributes, were evaluated by a group of un-trained panellists, using a 9-point Hedonic scale.

  1. Effects of whey protein concentrate, feed moisture and temperature on the physicochemical characteristics of a rice-based extruded flour.

    Science.gov (United States)

    Teba, Carla da Silva; Silva, Erika Madeira Moreira da; Chávez, Davy William Hidalgo; Carvalho, Carlos Wanderlei Piler de; Ascheri, José Luis Ramírez

    2017-08-01

    The influence of whey protein concentrate (WPC), feed moisture and temperature on the physicochemical properties of rice-based extrudates has been investigated. WPC (0.64-7.36g/100g rice) was extruded under 5 moisture (16.64-23.36g/100g) and 5 temperature (106.36-173.64°C) established by a 3 2 central composite rotational design. Physicochemical properties [color, porosimetry, crystallinity, water solubility and absorption, pasting properties, reconstitution test, proximate composition, amino acids, minerals and electrophoresis] were determined. WPC and feed moisture increased redness, yellowness and decreased luminosity. Feed moisture and temperature increased density and total volume pore. WPC and moisture increased crystallinity, but only WPC increased solubility and decrease the retrogradation tendency. Increasing temperature increased the viscosity of the extrudates. The addition of WPC improved the nutritional composition of the extrudates, especially proteins. It is suggested that the extrusion process positively affected the retention of most of the polypeptides chains. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Processamento e caracterização de snack extrudado a partir de farinhas de quirera de arroz e de bandinha de feijão Processing and characterization of an extruded snack made from broken rice flour and broken common bean flour

    Directory of Open Access Journals (Sweden)

    Ana Vânia Carvalho

    2012-03-01

    Full Text Available Este trabalho teve por objetivo desenvolver nova formulação de snack por extrusão termoplástica a partir de mistura de farinhas de quirera de arroz e de bandinha de feijão, bem como avaliar o potencial nutricional, tecnológico e sensorial do novo produto. A farinha de bandinha de feijão carioca foi incorporada à farinha de quirera de arroz na proporção de 30%. O snack foi produzido em extrusora monorrosca, escala piloto. Os parâmetros de extrusão foram fixos, utilizando-se três zonas de extrusão com temperaturas de 40, 60 e 85 °C; velocidade do parafuso de 177 rpm; taxa de alimentação de 292 g.min-1, e matriz circular de 3,85 mm de diâmetro. A amostra de snack foi submetida a caracterizações fisicoquímica, tecnológica e sensorial. Observou-se efeito significativo da farinha de bandinha de feijão no aumento dos teores proteico e de fibras no snack obtido, quando comparada à farinha de quirera de arroz. Em relação às características tecnológicas do produto, obteve-se 0,17 g.cm-3 para densidade aparente, 7,75 para o índice de expansão e 435, g.f para a dureza instrumental. A formulação estudada foi aceita sensorialmente, com índice de aceitação para impressão global de 76%. Conclui-se que é possível produzir snacks por extrusão a partir da incorporação de 30% de farinha de bandinha de feijão à farinha de quirera de arroz, resultando em produto aceito sensorialmente e com adequado valor nutricional.The objective of this work was to develop a new formulation for a snack made by thermoplastic extrusion from a mixture of broken rice flour and broken common bean flour, and assess the nutritional, sensory and technological potential of the new product. The broken common bean flour was added to the broken rice flour at a rate of 30%, and the snack was produced in a pilot scale single screw extruder. The extrusion parameters were fixed using three extrusion zones (at 40, 60 and 85 °C; screw speed of 177 rpm

  3. Extração enzimática das proteínas da farinha de arroz Enzymatic extraction of proteins from rice flour

    Directory of Open Access Journals (Sweden)

    Claudia Regina Vieira

    2008-09-01

    Full Text Available O presente trabalho teve como objetivo extrair enzimaticamente as proteínas de uma farinha comercial de arroz. Visando aumentar o Rendimento de Extração Protéica (REP, os seguintes parâmetros foram avaliados: tipo de enzima (protease alcalina e neutra; temperatura (40, 50 e 60 °C; pH (9,5, 10,5 e 11,0; tratamento físico da amostra (sem tratamento, ultra-turrax a 16.000 rpm e ultra-som a 120 W, ambos por 5, 10 e 15 minutos; relação Enzima:Substrato (E:S de 5:100 e 10:100; e concentração inicial de matéria-prima (1:3, 1:5 e 1:10 p/v. Os teores de proteínas da farinha de arroz e dos resíduos foram determinados para o cálculo do REP. Os resultados mostraram que a melhor condição de extração protéica, que levou ao maior REP, foi a que empregou a concentração inicial de matéria-prima a 1:10 (p/v, sem tratamento físico, com pH 10,5, com a protease alcalina na relação E:S de 10:100, a 50 °C, tendo atingido um REP de 63,4%.The enzymatic extraction of proteins from a commercial rice flour was studied in this work. In order to increase the Protein Extraction Yield (PEY, the following parameters were evaluated: enzyme type (alkaline and neutral protease; temperature (40, 50 and 60 °C; pH (9.5, 10.5 and 11.0; physical treatment of the sample (no treatment; Ultra-Turrax at 16.000 rpm and ultrasound at 120 W, both for 5, 10 and 15 minutes; enzyme:substrate ratio (E:S of 5:100 and 10:100 and initial concentration of raw material (1:3, 1:5 and 1:10 w/v. The PEY was calculated using the protein contents of rice flour and the extraction residues. The results showed that the best condition for protein extraction, which gave the highest PEY (63.4%, was that using an initial concentration of raw material of 1:10 (w/v, no physical treatment, pH 10.5, the alkaline protease, an E:S of 10:100, at 50 °C.

  4. Physico-mechanical Properties of Electron Beam Irradiated Particle boards Based on Wood flour/ Polyethylene/Cement Kiln Dust Impregnated with Unsaturated Polyester

    International Nuclear Information System (INIS)

    Abdel-Rahman, H.A.; Khattab, M.M.; Ismail, M.R.

    2010-01-01

    Particle boards were fabricated by mixing wood flour (WF), low density polyethylene (LDPE) and cement kiln dust (CKD) under hot pressure; and then impregnated in unsaturated polyester resin. These impregnated particle boards were subjected to various doses of electron beam irradiation up to 50 kGy. The physico-mechanical properties were characterized in terms of flexural strength, impact strength, water absorption, thickness swelling, and the thermal stability. The results showed that the partial replacement of wood flour with cement kiln dust up to 20% by weight improved the values of flexural strength, and impact strength. However, the water absorption percentage and thickness swelling values decreased with increasing the CKD ratio up to 40%. Furthermore, the treatment with electron beam irradiation doses improved the physico-mechanical properties of the impregnated particle boards up to 50 kGy. The improved results were confirmed by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA)

  5. Identifying irradiated flour by photo-stimulated luminescence technique

    International Nuclear Information System (INIS)

    Ros Anita Ahmad Ramli; Muhammad Samudi Yasir; Zainon Othman; Wan Saffiey Wan Abdullah

    2013-01-01

    Full-text: The photo-stimulated luminescence technique is recommended by European Committee for standardization for the detection food irradiation (EN 13751:2009). This study shows on luminescence technique to identify gamma irradiated five types of flour (corn flour, tapioca flour, wheat flour, glutinos rice flour and rice flour) at three difference dose levels in the range 0.2 - 1 kGy. The signal level is compare with two thresholds (700 and 5000). The majority of irradiated samples produce a strong signal above the upper threshold (5000 counts/ 60 s). All the control samples gave negative screening result while the signals below the lower threshold (700 counts/ 60s) suggest that the sample has not been irradiated. A few samples show the signal levels between the two thresholds (intermediate signals) suggest that further investigation. Reported procedure was also tested over 60 days, confirming the applicability and feasibility of proposed methods. (author)

  6. An update on the use of co-products from the milling of rice in value added food products

    Science.gov (United States)

    Because of the huge quantity of rice produced annually, milled-rice co-products; such as, rice bran, rice oil, rice wax, rice flour, and rice hull are plentiful and readily available. These co-products could be valuable sources of food ingredients, but they have been vastly under-utilized. Rice bra...

  7. seed flour

    African Journals Online (AJOL)

    ONOS

    2010-09-06

    Sep 6, 2010 ... and with a nice taste, used for cooking or as lamp oil. The fatty acid ... Pra seeds were obtained from a local market in Nakhon Si Thammarat. Page 2. Table 1. Proximate composition of pra seed flour. Constituent. Percentage ...

  8. Impact of Quince Flour on Gluten-free Muffins Production

    Directory of Open Access Journals (Sweden)

    Adriana PAUCEAN

    2017-05-01

    Full Text Available This study aimed to obtain gluten free muffins, with increased nutritional and sensorial value by adding quince flour into a composite flour. To optimize the recipe, four experimental variants using rice, soy, quince flours and starch in different proportions have been proposed. Quince is a rich source of vitamins, minerals, polyphenolic compounds and fibres. The quince flour addition led to muffins with increased content in minerals and very good sensorial properties in terms of taste, flavour, texture and general acceptance. It could be concluded that quince flour is a suitable source for obtaining gluten free muffins. Quince flour addition in aglutenic muffin composite flour up to 10% did not affect negatively their phisico-chemical and sensorial  properties.

  9. Flour pads: devices to improve CHESS fat suppression.

    Science.gov (United States)

    Moriya, Susumu; Miki, Yukio; Miyati, Tosiaki; Kanagaki, Mitsunori; Yokobayashi, Tsuneo

    2014-01-01

    We compared the suppression of lingering fat signals in chemical shift selective (CHESS) images by pads filled with flour and pads filled with rice in a phantom and human subjects. First, we prepared a phantom by creating an empty space in a mass of lard and filling the space with air, rice, or flour. Then, we obtained MR images of the phantoms in the center of the magnetic field and at a position 8 cm to the left (off-center) to compare lingering fat signals. MR images of the knee were obtained in 10 healthy volunteers using CHESS after placing a polyurethane sponge pillow, rice pad, or flour pad in the popliteal space under the flexed knee. We visually assessed the number of areas with lingering fat signals and the statistical differences among the groups were assessed using Tukey's test. Similarly to rice, flour clearly decreased lingering fat signals in the phantom study. A similar effect was obtained in the off-center images. In the volunteer study, the mean number of areas with lingering fat signals was 2.5 with a sponge pillow, 0.5 with the rice pad, and 0.3 with the flour pad. Those numbers were significantly different using flour pad and rice pad compared with sponge pillow (P CHESS images.

  10. Evaluation of Mechanical Properties and Morphological Studies of Rice Husk (Treated/Untreated)-CaCO3 Reinforced Epoxy Hybrid Composites

    Science.gov (United States)

    Verma, Deepak; Joshi, Garvit; Gupta, Ayush

    2016-10-01

    Natural fiber reinforced composites are a very popular area of research because of the easy availability and biodegradability of these fibers. The manufacturing of natural fiber composite is done by reinforcing fibers in the particulate form, fiber form or in woven mat form. Natural fiber composites also utilize industrial wastes as a secondary reinforcements like fly ash, sludge etc. By keeping all these point of views in the present investigation the effect of rice husk flour (chemically treated/untreated) and micro sized calcium carbonate with epoxy resin have been evaluated. The diameter of rice husk flour was maintained at 600 µm through mechanical sieving machine. The husk flour was chemically treated with NaOH (5 % w/v). Mechanical properties like hardness, flexural impact and compression strength were evaluated and found to be superior in modified or chemically treated flour as compared to unmodified or untreated flour reinforced composites. Scanning electron microscopy (SEM) study was also undertaken for the developed composites. SEM study shows the distribution of the rice husk flour and calcium carbonate over the matrix.

  11. Discrimination of Rice with Different Pretreatment Methods by Using a Voltammetric Electronic Tongue

    Directory of Open Access Journals (Sweden)

    Li Wang

    2015-07-01

    Full Text Available In this study, an application of a voltammetric electronic tongue for discrimination and prediction of different varieties of rice was investigated. Different pretreatment methods were selected, which were subsequently used for the discrimination of different varieties of rice and prediction of unknown rice samples. To this aim, a voltammetric array of sensors based on metallic electrodes was used as the sensing part. The different samples were analyzed by cyclic voltammetry with two sample-pretreatment methods. Discriminant Factorial Analysis was used to visualize the different categories of rice samples; however, radial basis function (RBF artificial neural network with leave-one-out cross-validation method was employed for prediction modeling. The collected signal data were first compressed employing fast Fourier transform (FFT and then significant features were extracted from the voltammetric signals. The experimental results indicated that the sample solutions obtained by the non-crushed pretreatment method could efficiently meet the effect of discrimination and recognition. The satisfactory prediction results of voltammetric electronic tongue based on RBF artificial neural network were obtained with less than five-fold dilution of the sample solution. The main objective of this study was to develop primary research on the application of an electronic tongue system for the discrimination and prediction of solid foods and provide an objective assessment tool for the food industry.

  12. Mudanças funcionais de farinha de arroz torrada com micro-ondas em função do teor de umidade e do tempo de processamento Functional changes of rice flour roasted with microwave as a function of moisture content and processing time

    Directory of Open Access Journals (Sweden)

    July-Ana Souza Tavares

    2012-06-01

    Full Text Available O Brasil está entre os dez maiores produtores de arroz do mundo. Devido ao beneficiamento, boa parte dos grãos é quebrada, gerando um subproduto de baixo valor comercial. A farinha de arroz normalmente é produzida a partir de grãos quebrados e é utilizada em produtos manufaturados devido a suas propriedades funcionais. Visando à obtenção de farinhas com propriedades funcionais diferenciadas e assim ampliar sua utilização como ingrediente em diferentes aplicações na indústria de alimentos, o objetivo deste trabalho foi avaliar o efeito da umidade e do tempo de torra (variáveis independentes, em micro-ondas, sobre as características funcionais de farinhas de arroz da cultivar 'IRGA 417'. Utilizou-se delineamento experimental composto central. A variação do teor de amilose (TA entre as farinhas de arroz torradas foi de 16-30g (100g-1, sendo que nos menores tempos de torra (até 13,3min e umidade acima de 18,5g (100g-1 observaram-se os maiores TA. Ocorreu elevação do índice de absorção de água (IAA à medida que aumentou o tempo de torra das farinhas de arroz. Os valores mais elevados de índice de solubilidade em água (ISA (25% foram encontrados para as farinhas de arroz com umidade acima de 22g (100g-1. Com o aumento do tempo de torra, ocorreu diminuição do pico de viscosidade, viscosidade final e de tendência a retrogradação das farinhas torradas. O contrário foi observado para a quebra de viscosidade. Conclui-se que a torração em micro-ondas pode ampliar as aplicações da farinha de arroz na indústria de alimentos em função das mudanças funcionais resultantes.Brazil is among the ten largest producers of rice in the world. Due to processing, most of the grains is broken, causing a by-product of low commercial value. Rice flour is usually produced from broken grains and used in manufactured products because of their functional properties. Aiming to obtain flours with different functional properties and thus

  13. An update on the use of rice in value-added food products.

    Science.gov (United States)

    Because of the huge quantity of rice produced annually, milled-rice co-products; such as, rice flour, rice bran, rice wax, and rice hull are plentiful and readily available. These co-products could be valuable sources of food ingredients, but they have been vastly under-utilized. This is a report ...

  14. Effects of a treatment with Se-rich rice flour high in resistant starch on enteric dysbiosis and chronic inflammation in diabetic ICR mice.

    Science.gov (United States)

    Yuan, Huaibo; Wang, Wenjuan; Chen, Deyi; Zhu, Xiping; Meng, Lina

    2017-05-01

    Enteric dysbiosis is associated with chronic inflammation and interacts with obesity and insulin resistance. Obesity and diabetes are induced in ICR (Institute of Cancer Research) mice fed a high-fat diet and administered a streptozocin injection. These mice were treated with normal rice (NR), normal rice with a high resistant starch content (NRRS) or Se-rich rice (selenium-enriched rice) with a high resistant starch content (SRRS). Faecal cell counts of Bifidobacterium, Lactobacillus and Enterococcus were significantly higher in SRRS-treated mice than in diabetic controls, while Enterobacter cloacae were lower. Similar results were also found in NRRS-treated mice. In contrast, no significant difference was found between NR-treated and diabetic control groups. The treatments with SRRS and NRRS reduced the faecal pH values of the diabetic mice. Regarding the inflammatory factor levels, lower levels of serum C-reactive protein (CRP), tumour necrosis factor-α (TNF-α), interleukin-6 (IL-6), nuclear factor-k-gene binding (NF-κB) and leptin (LEP) and higher adiponutrin (ADPN) levels were found in the SRRS and NRRS-treated mice compared with the diabetic and NR-treated mice. In addition, the CRP, IL-6 and NF-κB levels in the SRRS-treated mice were significantly reduced compared with those observed in the NRRS-treated mice. The reverse transcription-PCR (RT-PCR) results showed that the SRRS and NRRS-treated mice presented higher expression levels of orphan G protein-coupled receptor 41 (GPR41) and orphan G protein-coupled receptor 43 (GPR43) proteins compared with diabetic mice and NR-treated mice. These results indicate that treatments with rice high in RS exert beneficial effects by improving enteric dysbiosis and chronic inflammation. In addition, selenium and RS may exert synergistic effects on chronic inflammation. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  15. Visualized attribute analysis approach for characterization and quantification of rice taste flavor using electronic tongue

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Lin; Hu, Xianqiao [Rice Product Quality Supervision and Inspection Center, Ministry of Agriculture, China National Rice Research Institute, Hangzhou 310006 (China); Tian, Shiyi; Deng, Shaoping [College of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou 310035 (China); Zhu, Zhiwei, E-mail: 615834652@qq.com [Rice Product Quality Supervision and Inspection Center, Ministry of Agriculture, China National Rice Research Institute, Hangzhou 310006 (China)

    2016-05-05

    This paper deals with a novel visualized attributive analysis approach for characterization and quantification of rice taste flavor attributes (softness, stickiness, sweetness and aroma) employing a multifrequency large-amplitude pulse voltammetric electronic tongue. Data preprocessing methods including Principal Component Analysis (PCA) and Fast Fourier Transform (FFT) were provided. An attribute characterization graph was represented for visualization of the interactive response in which each attribute responded by specific electrodes and frequencies. The model was trained using signal data from electronic tongue and attribute scores from artificial evaluation. The correlation coefficients for all attributes were over 0.9, resulting in good predictive ability of attributive analysis model preprocessed by FFT. This approach extracted more effective information about linear relationship between electronic tongue and taste flavor attribute. Results indicated that this approach can accurately quantify taste flavor attributes, and can be an efficient tool for data processing in a voltammetric electronic tongue system. - Graphical abstract: Schematic process for visualized attributive analysis approach using multifrequency large-amplitude pulse voltammetric electronic tongue for determination of rice taste flavor attribute. (a) sample; (b) sensors in electronic tongue; (c) excitation voltage program and response current signal from MLAPS; (d) similarity data matrix by data preprocessing and similarity extraction; (e) feature data matrix of attribute; (f) attribute characterization graph; (g) attribute scores predicted by the model. - Highlights: • Multifrequency large-amplitude pulse voltammetric electronic tongue was used. • A visualized attributive analysis approach was created as an efficient tool for data processing. • Rice taste flavor attribute was determined and predicted. • The attribute characterization graph was represented for visualization of the

  16. Disinfestation of stored rice and corn grains by gamma irradiation. 3. Survival values for irradiated rice weevil and flour beetle and comparison of gamma irradiation and fumigation of weevil infested grains

    International Nuclear Information System (INIS)

    Manoto, E.C.; Villarcarlos, L.T.

    1976-02-01

    Survival values for Sitophilus oryzae and Tribolium castaneum adults were studied using gamma radiation dosage of 25, 50, 100 and 150 krad. Results with the two species seemed similar, although the rice weevil appeared the more sensitive. Rice and corn grains were artificially infested with Sitophilus oryzae and then treated with gamma radiation or fumigation. Both treatment reduced or eliminated adult emergence although fumigation left some insecticidal residues in corn. Sterility in the adult weevils was induced by 15 or 25 krad treatment of gamma radiation. A practical control level for bulk irradiation of rice or corn grains could probably be achieved by a 25 krad treatment although complete disinfestation should be achieved by a 50 krad treatment

  17. FLUORIDE LEVELS IN COMMERCIALLY AVAILABLE RICE IN ...

    African Journals Online (AJOL)

    Preferred Customer

    2013-05-05

    May 5, 2013 ... Rice is one of the commonly consumed cereals for more than half of the ... also used as flour, for making rice wine, as ingredient for beer and liquor, ... Fluoride is a necessary element to human health, and a moderate amount of fluoride intake ... For Ethiopian red rice (ERR) Fogera was selected to collect.

  18. Optimisation and Evaluation of the Effect of Bambara Groundnut Addition on the Nutritional Quality and Functional Properties of Amaranth Grain-Based Composite Flour

    Directory of Open Access Journals (Sweden)

    Awolu Olugbenga Olufemi

    2017-12-01

    Full Text Available Nutritional quality and functional properties of composite flour consisting amaranth grain, bambara groundnut, carrot and rice bran flours were evaluated. The dependent variables were optimized using optimal mixture model of response surface methodology. Amaranth grain flour (70 – 80.75%, bambara groundnut flour (15-25%, carrot flour (2-5% and rice bran (2-10% were the independent variables. From the results, very high protein content (about 40% was obtained when the bambara content inclusion was 25%. Bambara groundnut flour inclusion up to 15% also resulted in high protein contents (≤ 37%. Supplementation of the composite flour with high carrot flour content (up to 10% also enhanced the protein content when the bambara groundnut content was low. High carrot flour inclusion had the highest positive effect on the crude fibre content (3.7-3.9% followed by rice bran and bambara groundnut flours in that order. Bambara groundnut had highest positive effect on the ash content; followed by carrot and rice flours. While amaranth grain, carrot and rice bran significantly (p≤0.05 affect the proximate and functional compositions, bambara groundnut had the highest and best effect on the proximate, functional, mineral properties as well as the amino acid profile of the composite flour.

  19. Characterization of Chinese rice wine taste attributes using liquid chromatographic analysis, sensory evaluation, and an electronic tongue.

    Science.gov (United States)

    Yu, HaiYan; Zhao, Jie; Li, Fenghua; Tian, Huaixiang; Ma, Xia

    2015-08-01

    To evaluate the taste characteristics of Chinese rice wine, wine samples sourced from different vintage years were analyzed using liquid chromatographic analysis, sensory evaluation, and an electronic tongue. Six organic acids and seventeen amino acids were measured using high performance liquid chromatography (HPLC). Five monosaccharides were measured using anion-exchange chromatography. The global taste attributes were analyzed using an electronic tongue (E-tongue). The correlations between the 28 taste-active compounds and the sensory attributes, and the correlations between the E-tongue response and the sensory attributes were established via partial least square discriminant analysis (PLSDA). E-tongue response data combined with linear discriminant analysis (LDA) were used to discriminate the Chinese rice wine samples sourced from different vintage years. Sensory evaluation indicated significant differences in the Chinese rice wine samples sourced from 2003, 2005, 2008, and 2010 vintage years in the sensory attributes of harmony and mellow. The PLSDA model for the taste-active compounds and the sensory attributes showed that proline, fucose, arabinose, lactic acid, glutamic acid, arginine, isoleucine, valine, threonine, and lysine had an influence on the taste characteristic of Chinese rice wine. The Chinese rice wine samples were all correctly classified using the E-tongue and LDA. The electronic tongue was an effective tool for rapid discrimination of Chinese rice wine. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Farinha de mandioca enriquecida com bioproteínas (Saccharomyces cerevisiae, em associação ao feijão e arroz, na dieta de ratos em crescimento Cassava flour enriched with yeast (Saccharomyces cerevisiae protein, in association with beans and rice, in the diet of growing rats

    Directory of Open Access Journals (Sweden)

    Anastácia Cavalcanti Metri

    2003-01-01

    Full Text Available Avaliou-se o efeito da mistura de feijão, arroz e farinha de mandioca enriquecida com bioproteína (Saccharomyces cerevisiae, em ratos wistar machos recém-desmamados (n=60, durante 28 dias. Foram utilizadas as seguintes dietas: experimentais (feijão, arroz e farinha de mandioca enriquecida com leveduras; feijão, arroz e farinha de mandioca comum; controle (farinha de mandioca enriquecida com levedura; e padrão (caseína. Determinaram-se os testes biológicos. Os orgãos foram removidos para análise de pesos úmido e seco (rim esquerdo, baço e amostras do fígado e cérebro, teor de proteína (fígado e cérebro e histopatologia (fígado, coração e rim direito. Foram ainda quantificados os lipídios totais da carcaça dos animais. Os dados foram estatisticamente avaliados pelo teste Não Paramétrico de Kruskal-Wallis e pelo teste de Comparações Múltiplas (pThe effect of a mixture of beans, rice and cassava flour enriched with yeast (Saccharomyces cerevisiae protein was assessed in weanling male Wistar rats (n=60, during 28 days. The following diets were used: experimental (beans, rice and manioc flour with yeast protein; beans, rice and cassava flour without yeast protein; control (cassava flour with yeast protein; and standard (casein. The biological test were determined. The organs were removed for evaluation of wet and dry weights (left kidney, spleen and liver and brain samples, protein levels (liver and brain, and histopathology (heart, right kidney and liver. Carcass total lipids were also recorded. Results were statistically analyzed by the Nonparametric Test of Kruskal-Wallis and the Test of Multiple Comparisons (p<0.05. The highest values for all investigated parameters were found in the casein-fed group, followed by the experimental groups. Data suggest that flour enriched with yeast protein can be recommended as a dietary supplement to eradicate the nutritional deficiency in the poor population.

  1. Características tecnológicas de farinhas de arroz pré-gelatinizadas obtidas por extrusão termoplástica Technological properties of pre-gelatinized rice flour obtained by thermoplastic extrusion

    Directory of Open Access Journals (Sweden)

    Maria Teresa Pedrosa Silva Clerici

    2008-10-01

    Full Text Available A farinha de arroz tem sido um ingrediente atrativo para a indústria de extrusados, devido à suas qualidades como sabor suave, cor branca e hipoalergenicidade. Objetivou-se, neste trabalho, produzir e analisar farinha de arroz pré-gelatinizada (FPG por extrusão termoplástica. As FPG foram produzidas num extrusor termoplástico monorosca Brabender, variando-se a umidade (19,2 a 24,8% e a temperatura de extrusão (108 a 192ºC. As características de torque, índice de expansão, propriedades viscoamilográficas, índice de absorção em água (IAA e índice de solubilidade em água (ISA das FPG foram analisadas por metodologia de superfície de resposta (MRS e análise de componentes principais (ACP. Os resultados analisados por MRS e ACP indicaram que o torque e o índice de expansão dos extrusados apresentaram os maiores valores quando foram usados os menores teores de umidade. As FPG apresentaram, dentro das propriedades viscoamilográficas, a viscosidade inicial de pasta maior em temperaturas mais altas, já a viscosidade a 95ºC e a 50ºC foram maiores quando temperatura e umidade estavam em extremos opostos. O IAA foi menor quando se usaram baixas temperaturas e maiores teores de umidades; no entanto, o ISA, quando analisado pela MRS, não apresentou influência da temperatura e umidade, mas quando analisado pela ACP, foi maior quando as temperaturas estavam entre 120 - 150ºC e os teores de umidade entre 19,2 e 22%. Concluindo, as análises de MRS e de ACP mostraram que a variação das propriedades tecnológicas das FPG foram relacionadas aos extremos de temperatura e/ou umidade utilizados durante o processo de extrusão, e a ACP foi capaz de complementar a análise feita através da MRS.The rice flour has become an attractive ingredient in the extrusion industry due to its unique attributes such as bland taste, white color and hypoallergenicity. The purpose of this research was to produce and analyze pre-gelatinized rice flour (GRF

  2. Effect of gamma irradiation on rice and its food products

    International Nuclear Information System (INIS)

    Sung, W.-C.

    2005-01-01

    Two milled indica rice varieties were exposed to gamma radiation with doses ranging from 0 to 1.0 kGy. The effects of gamma irradiation on rice flour pasting properties and the qualities of its food product, rice curd, were compared to the effects of storage. A dose of 1 kGy can decrease the flour paste viscosity and tenderize the texture of the rice curd to similar levels as those obtained after 12 months of storage. It was thus shown that gamma irradiation could shorten the indica rice aging time and improve the processing stability and quality of rice products

  3. Effect of gamma irradiation on rice and its food products

    Energy Technology Data Exchange (ETDEWEB)

    Sung, W.-C. [Department of Hotel and Restaurant Management, Chia Nan University of Pharmacy and Science, 60 Erh-Jen Road, Sec. 1, Pao-An, Jen-Te Hsiang, Tainan 717, Taiwan (China)]. E-mail: sungwilliam2001@yahoo.com.tw

    2005-07-01

    Two milled indica rice varieties were exposed to gamma radiation with doses ranging from 0 to 1.0 kGy. The effects of gamma irradiation on rice flour pasting properties and the qualities of its food product, rice curd, were compared to the effects of storage. A dose of 1 kGy can decrease the flour paste viscosity and tenderize the texture of the rice curd to similar levels as those obtained after 12 months of storage. It was thus shown that gamma irradiation could shorten the indica rice aging time and improve the processing stability and quality of rice products.

  4. Cake Flour Is Not Just Any Old White Powder: A Fun Take-Home Experiment

    Science.gov (United States)

    McMullen, Kevin; Rasmus, C.; Virtue, Melinda; Slik, Kate; Wrigley, Colin

    2014-01-01

    Baking cakes with different recipes can provide an exercise in the application of the scientific method, illustrating the need to vary only one ingredient at a time for correct derivation of conclusions. This experiment, most likely to be performed at home, compares a cake flour with flours from durum wheat, rice and cornflour (gluten-free…

  5. Degradation and detection of transgenic Bacillus thuringiensis DNA and proteins in flour of three genetically modified rice events submitted to a set of thermal processes.

    Science.gov (United States)

    Wang, Xiaofu; Chen, Xiaoyun; Xu, Junfeng; Dai, Chen; Shen, Wenbiao

    2015-10-01

    This study aimed to investigate the degradation of three transgenic Bacillus thuringiensis (Bt) genes (Cry1Ab, Cry1Ac, and Cry1Ab/Ac) and the corresponding encoded Bt proteins in KMD1, KF6, and TT51-1 rice powder, respectively, following autoclaving, cooking, baking, or microwaving. Exogenous Bt genes were more stable than the endogenous sucrose phosphate synthase (SPS) gene, and short DNA fragments were detected more frequently than long DNA fragments in both the Bt and SPS genes. Autoclaving, cooking (boiling in water, 30 min), and baking (200 °C, 30 min) induced the most severe Bt protein degradation effects, and Cry1Ab protein was more stable than Cry1Ac and Cry1Ab/Ac protein, which was further confirmed by baking samples at 180 °C for different periods of time. Microwaving induced mild degradation of the Bt and SPS genes, and Bt proteins, whereas baking (180 °C, 15 min), cooking and autoclaving led to further degradation, and baking (200 °C, 30 min) induced the most severe degradation. The findings of the study indicated that degradation of the Bt genes and proteins somewhat correlated with the treatment intensity. Polymerase chain reaction, enzyme-linked immunosorbent assay, and lateral flow tests were used to detect the corresponding transgenic components. Strategies for detecting transgenic ingredients in highly processed foods are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Effect of enzymatic (thermostable α-amylase) treatment on the physicochemical and antioxidant properties of extruded rice incorporated with soybean flour.

    Science.gov (United States)

    Xu, Enbo; Wu, Zhengzong; Pan, Xiaowei; Long, Jie; Wang, Fang; Xu, Xueming; Jin, Zhengyu; Jiao, Aiquan

    2016-04-15

    In order to determine the effect of enzymatic extrusion on the physicochemical and antioxidant properties of rice/soybean mixture, different mass ratios (100/0, 95/5, 85/15, 70/30, 50/50 and 25/75%, w/w) were treated with thermostable α-amylase. The reduced special mechanical energy and the enhanced product temperature were closely and regularly linked with the increase of soybean content. The bulk density and water solubility index increased, and the water absorption index and viscosities decreased remarkably after enzymatic extrusion, however, the modification caused by α-amylase were dramatically eliminated with the increase of soybean content to ∼50%. Moreover, the addition of enzyme exhibited an improvement of the total phenolic/flavonoid content (TPC/TFC) and antioxidant capacities compared to traditional extrusion. The TPC/TFC retention of extrudate (ratios of 85/15 and 70/30%) attained over 90%, but dramatically decreased (72.91 and 67.81%, respectively) with soybean added to 75%, probably due to the great reduction of starch substrate for enzymatic hydrolysis. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  7. Rice varieties in relation to rice bread quality.

    Science.gov (United States)

    Han, Hye Min; Cho, Jun Hyeon; Kang, Hang Won; Koh, Bong Kyung

    2012-05-01

    It is difficult to predict rice bread quality only from the amylose content (AC) or dough characteristics of new lines produced by rice breeding programmes. This study investigated the AC relative to bread baking quality of rice varieties developed in Korea, and identified specific characteristics that contribute to rice bread quality. Manmibyeo, Jinsumi, Seolgaeng and Hanareumbyeo were classified as low AC, YR24088 Acp9, Suweon517, Chenmaai and Goamibyeo as intermediate AC and Milyang261 as high AC. Suweon517, Milyang261 and Manmibyeo had a high water absorption index (WAI), while Goamibyeo, YR24088 Acp9, Jinsumi, Seolgaeng, Hanareumbyeo and Chenmaai had a low WAI. The gelatinisation enthalpy of flour varied from 9.2 J g(-1) in Milyang261 to 14.8 J g(-1) in YR24088 Acp9. After 7 days of storage the rate of flour retrogradation and crumb firmness were weakly correlated, with the exception of Jinsumi. Bread volumes of Jinsumi, Chenmaai, YR24088 Acp9 and Goamibyeo were comparable to that of wheat flour, but the rest were unsuited to bread making because of their low volume and hard crumb texture. Based on volume, texture and crumb firmness ratio, Chenmaai and Goamibyeo were the most appropriate varieties for making bread. An intermediate AC and low WAI were the primary indicators of rice bread flour quality. Copyright © 2011 Society of Chemical Industry.

  8. A BIODEGRADABLE FILM FROM JACKFRUIT (ARTOCARPUS HETEROPHYLLUS AND DURIAN (DURIO ZIBETHINUS SEED FLOURS

    Directory of Open Access Journals (Sweden)

    Diah S. Retnowati

    2016-02-01

    Full Text Available The jackfruit (Artocarpus heterophyllus and durian (Durio zibethinus seeds contain high portion of amylose, which makes them potential materials for biodegradable films. The objective of this study is to develop biodegradable films composed of jackfruit and durian seed flours and glycerol as plasticizer. The films were prepared by dispersing flours in water, adding glycerol, heating the mixture, casting the solution on an acrylic plate, and drying the films at 50 ºC for 20 hours. Glycerol contributes to the flexibility of the film, while reduces the strength of the film. The Young’s modulus, tensile strength, and elongation at break increase as the ratio of jackfruit to durian seed flour increases. The films made from jackfruit and durian seed flours in this work are stronger than the film made from rice flour obtained by other researcher. Therefore, jackfruit and durian seed flours are potential raw material for biodegradable films.

  9. Wood, Flour, Journal: How the Electronic Turn Has Affected the Way Journals are Found, Used, and Read

    Directory of Open Access Journals (Sweden)

    Jeffrey Garrett

    2009-11-01

    Full Text Available The repercussions of the recent dramatic shift in journal publication from a print to a digital platform – a shift termed by the author “the electronic turn” - are far-reaching. Delivered originally as a part of a panel discussion, this essay marks out the profound changes around journal content: how academic libraries purchase it, in how they provide access to it, and in how people use it. Factors contributing to the process include the growth of technological capacity, new publishing models, economic necessity, user preference, and changes in the way people prefer to read. The “electronic turn” is viewed as at the same time unavoidable and calling for corresponding changes in the mindsets of libraries, of publishers, and of researchers.

  10. Properties of duck meat sausages supplemented with cereal flours.

    Science.gov (United States)

    Yang, H S; Ali, M S; Jeong, J Y; Moon, S H; Hwang, Y H; Park, G B; Joo, S T

    2009-07-01

    Duck meat sausages were prepared using 10% beef fat (FDS) and 10% hydrated cereal flours including rice (RDS), wheat, corn, millet, and barley to replace fat. Control duck sausages (DS) were also prepared only with duck meat and duck meat plus 10% beef fat. Results showed that protein and fat contents significantly decreased and total expressible fluid reduced with the addition of cereal flours in duck sausage batters. The FDS had higher fat content and lower pH compared with others. Duck sausages with 10% supplemented wheat flour showed the lowest cooking loss among sausages and had similar redness and chroma values to FDS and DS. Texture analysis indicated that hardness of duck sausage significantly decreased when cereal flours and beef fat were added. In particular, RDS showed the lowest values for all texture measurements compared with others. Result of moisture absorption capacity suggested that the decrease in hardness in RDS was due to higher moisture retention for rice flour treatment. Sensory evaluation indicated that DS had significantly lower overall acceptability than RDS, due to its off-flavor, whereas RDS had higher overall acceptability than DS.

  11. Ultrasonic analysis to discriminate bread dough of different types of flour

    Science.gov (United States)

    García-Álvarez, J.; Rosell, C. M.; García-Hernández, M. J.; Chávez, J. A.; Turó, A.; Salazar, J.

    2012-12-01

    Many varieties of bread are prepared using flour coming from wheat. However, there are other types of flours milled from rice, legumes and some fruits and vegetables that are also suitable for baking purposes, used alone or in combination with wheat flour. The type of flour employed strongly influences the dough consistency, which is a relevant property for determining the dough potential for breadmaking purposes. Traditional methods for dough testing are relatively expensive, time-consuming, off-line and often require skilled operators. In this work, ultrasonic analysis are performed in order to obtain acoustic properties of bread dough samples prepared using two different types of flour, wheat flour and rice flour. The dough acoustic properties can be related to its viscoelastic characteristics, which in turn determine the dough feasibility for baking. The main advantages of the ultrasonic dough testing can be, among others, its low cost, fast, hygienic and on-line performance. The obtained results point out the potential of the ultrasonic analysis to discriminate doughs of different types of flour.

  12. Ultrasonic analysis to discriminate bread dough of different types of flour

    International Nuclear Information System (INIS)

    García-Álvarez, J; García-Hernández, M J; Chávez, J A; Turó, A; Salazar, J; Rosell, C M

    2012-01-01

    Many varieties of bread are prepared using flour coming from wheat. However, there are other types of flours milled from rice, legumes and some fruits and vegetables that are also suitable for baking purposes, used alone or in combination with wheat flour. The type of flour employed strongly influences the dough consistency, which is a relevant property for determining the dough potential for breadmaking purposes. Traditional methods for dough testing are relatively expensive, time-consuming, off-line and often require skilled operators. In this work, ultrasonic analysis are performed in order to obtain acoustic properties of bread dough samples prepared using two different types of flour, wheat flour and rice flour. The dough acoustic properties can be related to its viscoelastic characteristics, which in turn determine the dough feasibility for baking. The main advantages of the ultrasonic dough testing can be, among others, its low cost, fast, hygienic and on-line performance. The obtained results point out the potential of the ultrasonic analysis to discriminate doughs of different types of flour.

  13. Gluten-free dough-making of specialty breads: Significance of blended starches, flours and additives on dough behaviour.

    Science.gov (United States)

    Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio

    2015-10-01

    The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined

  14. Quinoa flour in baked products.

    Science.gov (United States)

    Lorenz, K; Coulter, L

    1991-07-01

    The performance of quinoa-wheat flour blends (5/95, 10/90, 20/80, 30/70) were evaluated in breads, cakes and cookies. Breads baked with 5% and 10% quinoa flour were of good quality. Loaf volume decreased, crumb grain became more open and the texture slightly harsh at higher usage levels of quinoa flour. A bitter after taste was noted at the 30% level. Cake quality was acceptable with 5% and 10% of quinoa flour. Cake grain became more open and the texture less silky as the level of quinoa substitution increased. Cake taste improved with either 5% or 10% quinoa flour in the blend. Cookie spread and top grain scores decreased with increasing levels of quinoa flour blended with high-spread cookie flour. Flavor improved up to 20% quinoa flour in the blend. Cookie spread and cookie appearance was improved with a quinoa/low-spread flour blend by using 2% lecithin.

  15. Improved algorithms for the classification of rough rice using a bionic electronic nose based on PCA and the Wilks distribution.

    Science.gov (United States)

    Xu, Sai; Zhou, Zhiyan; Lu, Huazhong; Luo, Xiwen; Lan, Yubin

    2014-03-19

    Principal Component Analysis (PCA) is one of the main methods used for electronic nose pattern recognition. However, poor classification performance is common in classification and recognition when using regular PCA. This paper aims to improve the classification performance of regular PCA based on the existing Wilks Λ-statistic (i.e., combined PCA with the Wilks distribution). The improved algorithms, which combine regular PCA with the Wilks Λ-statistic, were developed after analysing the functionality and defects of PCA. Verification tests were conducted using a PEN3 electronic nose. The collected samples consisted of the volatiles of six varieties of rough rice (Zhongxiang1, Xiangwan13, Yaopingxiang, WufengyouT025, Pin 36, and Youyou122), grown in same area and season. The first two principal components used as analysis vectors cannot perform the rough rice varieties classification task based on a regular PCA. Using the improved algorithms, which combine the regular PCA with the Wilks Λ-statistic, many different principal components were selected as analysis vectors. The set of data points of the Mahalanobis distance between each of the varieties of rough rice was selected to estimate the performance of the classification. The result illustrates that the rough rice varieties classification task is achieved well using the improved algorithm. A Probabilistic Neural Networks (PNN) was also established to test the effectiveness of the improved algorithms. The first two principal components (namely PC1 and PC2) and the first and fifth principal component (namely PC1 and PC5) were selected as the inputs of PNN for the classification of the six rough rice varieties. The results indicate that the classification accuracy based on the improved algorithm was improved by 6.67% compared to the results of the regular method. These results prove the effectiveness of using the Wilks Λ-statistic to improve the classification accuracy of the regular PCA approach. The results

  16. Quality evaluation of irradiated wheat flours

    International Nuclear Information System (INIS)

    Cattani, M.M.; Mastro, N.L. del; Rigoni, V.H.

    1995-01-01

    Co-60 irradiated wheat flour samples in the range of 0.2-30 kGy have been analysed by the ESR technique. (Electron Spin Resonance). Tests of color, stability and Falling Number were also performed. The observed ESR signals showed complex but similar behavior for all samples. The intensity of the ESR signal showed a linear dependence with dose up to 30 kGy. Tests of color, stability and Falling Number showed that up to the dose recommended to destroy plagues (1 kGy), the intrinsic properties of flours are preserved being the product in perfect conditions to be commercialized. (author). 7 refs, 5 figs, 1 tab

  17. Degree of roasting of carob flour affecting the properties of gluten-free cakes and cookies.

    Science.gov (United States)

    Román, Laura; González, Ana; Espina, Teresa; Gómez, Manuel

    2017-06-01

    Carob flour is a product rich in fibre obtained from by-products of the locust bean gum extraction processing. The flour is commercialised with different degrees of roasting in order to improve its organoleptic characteristics. In this study, carob flour with three different roasting degrees was used to replace rice flour (15%) in gluten-free cakes and cookies. The influence of this replacement was studied on the psychochemical characteristics and acceptability of the final products. The incorporation of carob flour increased the viscosity of cake batters and increased the solid elastic-like behaviour of the cookie doughs, indicating a stronger interaction among the formula ingredients. The inclusion of carob flour, with a low time of roasting, did not lead to any significant differences in the specific volume and hardness of the cakes, but reduced cake staling and the thickness and width of the cookies. Darker colours were obtained when carob flour was incorporated into the product. The acceptability of cakes was only reduced with the addition of highly roasted carob flour, while in the case of cookies there was a decline in the acceptability of all carob flour cookies, which was mostly perceived with the highest roasting degree, something mainly attributed to the bitter taste of the products.

  18. Catering Gluten-Free When Simultaneously Using Wheat Flour.

    Science.gov (United States)

    Miller, Kathryn; McGough, Norma; Urwin, Heidi

    2016-02-01

    A European law on gluten-free (GF) labeling came into force in 2012, covering foods sold prepacked and in food service establishments, and a similar U.S. Food and Drug Administration (FDA) regulation covers GF labeling from August 2014. Gluten is found in the grains wheat, rye, and barley. A common source of gluten in the kitchen is wheat flour. This research aimed to determine variables that have a significant effect on gluten contamination in commercial kitchens when wheat flour is in use and to establish controls necessary to assure GF production. A pilot study was used to test the following hypotheses: (i) increasing duration of exposure to wheat flour would increase gluten contamination, (ii) increasing distance between the site of preparation and the site of wheat flour would reduce gluten contamination, (iii) the use of a ventilation hood would decrease gluten contamination, and (iv) the use of a barrier segregating the site of preparation of a GF meal and the use of wheat flour would decrease gluten contamination. Petri dishes containing GF rice pudding were placed in three directions at increasing distances (0.5 to 2 m) from a site of wheat flour use. A barrier was in place between a third of samples and the site of wheat flour. After wheat flour was handled for 0.5 and 4.0 h, petri dishes were sealed and the contents were analyzed for gluten. The experiment was duplicated with the ventilation hood on and off. The pilot study revealed that a distance of 2 m from the use of wheat flour was required to control gluten contamination at ≤20 ppm if wheat flour had been in use for 4.0 h. The identified control of distance was tested in five different study sites. In each of the study sites, a test meal was prepared a minimum of 2 m away from the site of wheat flour use. Although kitchens vary and must be considered individually, the established control of a minimum 2 m distance, along with good hygiene practices, was found to be effective in preparing GF meals

  19. Identifying irradiated flours by photo-stimulated luminescence technique

    Energy Technology Data Exchange (ETDEWEB)

    Ramli, Ros Anita Ahmad; Yasir, Muhamad Samudi [Faculty of Science and Technology, National University of Malaysia, Bangi, 43000 Kajang, Selangor (Malaysia); Othman, Zainon; Abdullah, Wan Saffiey Wan [Malaysian Nuclear Agency, Bangi 43000 Kajang, Selangor (Malaysia)

    2014-02-12

    Photo-stimulated luminescence (PSL) technique was used in this study to detect gamma irradiation treatment of five types of flours (corn, rice, tapioca, wheat and glutinous rice) at four different doses 0, 0.2, .05 and 1kGy. The signal level was compared with two threshold values (700 and 5000). With the exception of glutinous rice, all irradiated samples produced a strong signal above the upper threshold (5000 counts/60s). All control samples produced negative result with the signals below the lower threshold (700 counts/60s) suggesting that the samples have not been irradiated. Irradiated glutinous rice samples produced intermediate signals (700 - 5000 counts/60s) which were subsequently confirmed using calibrated PSL. The PSL signals remained stable after 90 days of storage. The findings of this study will be useful to facilitate control of food irradiation application in Malaysia.

  20. Identifying irradiated flours by photo-stimulated luminescence technique

    International Nuclear Information System (INIS)

    Ramli, Ros Anita Ahmad; Yasir, Muhamad Samudi; Othman, Zainon; Abdullah, Wan Saffiey Wan

    2014-01-01

    Photo-stimulated luminescence (PSL) technique was used in this study to detect gamma irradiation treatment of five types of flours (corn, rice, tapioca, wheat and glutinous rice) at four different doses 0, 0.2, .05 and 1kGy. The signal level was compared with two threshold values (700 and 5000). With the exception of glutinous rice, all irradiated samples produced a strong signal above the upper threshold (5000 counts/60s). All control samples produced negative result with the signals below the lower threshold (700 counts/60s) suggesting that the samples have not been irradiated. Irradiated glutinous rice samples produced intermediate signals (700 - 5000 counts/60s) which were subsequently confirmed using calibrated PSL. The PSL signals remained stable after 90 days of storage. The findings of this study will be useful to facilitate control of food irradiation application in Malaysia

  1. Cereal bars produced with banana peel flour: evaluation of acceptability and sensory profile.

    Science.gov (United States)

    Carvalho, Vania Silva; Conti-Silva, Ana Carolina

    2018-01-01

    A mixture design was used to investigate the effects of banana peel flour, rice flakes and oat flour on sensory acceptability of cereal bars, with subsequent evaluation of sensory profile of products identified as having high acceptability. Regions of greater response for acceptability of the cereal bars, which are dependent on the three investigated components, were found. Although having good acceptability, sensory profiles of cereal bars were different. A cereal bar with the lowest quantity of banana peel flour was described as having a higher amount of rice flakes, chewiness and crispness, while formulations with intermediate and highest quantities of banana peel flour were described by darker color, higher banana aroma and bitter taste. Contrary to expectations, banana flavor of cereal bar with highest quantity of banana peel flour was lower than cereal bars with intermediate quantities. Cereal bars were not different in terms of hardness and adhesiveness and they also had a similar sweet taste and oat flavor. The use of banana peel flour in production of cereal bars is feasible and, even with different sensory profiles, cereal bars with banana peel flour are acceptable, which may favor the development of new products for different market niches. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  2. Efeito dos parâmetros de extrusão termoplástica sobre as propriedades tecnológicas de farinhas pré-cozidas elaboradas com arroz e feijão Effect of the thermoplastic extrusion parameters on the technological properties of pre-cooked flours prepared with rice and beans

    Directory of Open Access Journals (Sweden)

    Ana Vânia Carvalho

    2012-12-01

    pré-gelatinizada mista de arroz e feijão apresenta as melhores características tecnológicas quando processada sob temperatura de 70 °C, 21% de umidade e com adição de 30% de farinha de feijão à mistura.The objective of this study was to obtain a pre-gelatinized flour from a mixed rice and bean flour, and to evaluate the influence of the formulations and processing conditions on the technological properties and protein content of the final product. A complete 2³ factorial design was adopted with central and axial points to prepare the mixed pre-gelatinized flour, varying the following parameters: percent of bean flour, moisture content and processing temperature. The responses were: protein content (Y1, water absorption index (Y2 and water solubility index (Y3. The formulations were processed in a single screw extruder. The temperature in zone 3 of the extruder varied between 46 and 114 °C, according to the experimental design. The processed products were dried in an air circulating oven at 50 °C for about 15 hours, presenting a final moisture between 4 and 6%, and were then ground in a knife mill and packed into polyethylene bags until analysed. For the protein content, only the percent bean flour was significant and with a positive effect, that is, the higher the bean flour content, the higher the protein content of the final product, independent of the processing conditions - temperature or moisture. For the water absorption index (WAI, the moisture content, temperature and moisture and temperature interaction were significant. Higher WAI values were observed at intermediate temperatures (60 to 80 °C and high moisture contents (17 to 20%. For the water solubility index (WSI, the moisture content, temperature and moisture e temperature interaction were again significant, higher WSI values being observed at higher temperatures (100 °C and lower moisture contents (14%. According to the experimental design, the pre-gelatinized mixed rice and bean flour

  3. Effects of Rice Husk Modification with Liquid Natural Rubber and Exposure to Electron Beam Radiation on the Mechanical Properties of NR/ HDPE/ Rice Husk Composites

    International Nuclear Information System (INIS)

    Lane, C.E.; Ishak Ahmad; Ibrahim Abdullah; Dahlan Mohd

    2011-01-01

    Rice husk (RH) powder is a natural fibre capable of reinforcing natural rubber thermoplastic (TPNR) NR/ HDPE composites on specific modification of the particle surface. In this study the modification of RH powder involved pre-treatment with 5 % sodium hydroxide (NaOH) solution, soaking in LNR solution and exposure of LNR coated RH to electron beam (EB) irradiation. Preparation of NR/ HDPE/ RH composites was via melt-mixing in an internal mixer at predetermined conditions. Morphology study of the composites using scanning electron microscope (SEM) showed a homogeneous distribution of modified RH particles and particle-matrix interaction in the composite. Modified RH filled composites exhibited a significant change in mechanical properties. The maximum stress and impact strength were 6.7 MPa and 13.2 kJ/ m 2 , respectively at 20 kGy radiation, while the tensile modulus was 79 MPa at 30 kGy dose. The interfacial RH-TPNR interaction for the LNR-EB treated RH particles had improved in the EB dosage range of 20-30 kGy. However, over exposure to radiation caused degradation of rubber coat and interaction between particles to increase. Agglomeration of filler particles would occur and caused inhomogeneous distribution of filler in the composite. (author)

  4. Preparation and characterization of electron-beam treated HDPE composites reinforced with rice husk ash and Brazilian clay

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, A.V., E-mail: angelortiz@ipen.br [Nuclear and Energy Research Institute, IPEN-CNEN/SP Av. Prof. Lineu Prestes 2242, São Paulo, SP 05508-000 (Brazil); Teixeira, J.G.; Gomes, M.G.; Oliveira, R.R. [Nuclear and Energy Research Institute, IPEN-CNEN/SP Av. Prof. Lineu Prestes 2242, São Paulo, SP 05508-000 (Brazil); Díaz, F.R.V. [Metallurgical and Materials Engineering Department, Polytechnic School, University of São Paulo Av. Prof. Mello de Morais 2463, São Paulo, SP 05508-900 (Brazil); Moura, E.A.B. [Nuclear and Energy Research Institute, IPEN-CNEN/SP Av. Prof. Lineu Prestes 2242, São Paulo, SP 05508-000 (Brazil)

    2014-08-15

    Highlights: • We examine changes in HDPE properties when waste and clay are used as reinforcement. • The addition of only 3% of clay leads to important gains in HDPE properties. • The use of electron-beam contributes to greater improvements in material properties. • We observe 85% of cross-linking degree for the HDPE when treated with e-beam. - Abstract: This work evaluates the morphology, mechanical and thermo-mechanical properties of high density polyethylene (HDPE) composites. HDPE reinforced with rice husk ashes (80:20 wt%), HDPE reinforced with clay (97:3 wt%) and HDPE reinforced with both rice husk ashes and clay(77:20:3 wt%) were obtained. The Brazilian bentonite chocolate clay was used in this study. This Brazilian smectitic clay is commonly used to produce nanocomposites. The composites were produced by melting extrusion process and then irradiation was carried out in a 1.5 MeV electron-beam accelerator (room temperature, presence of air). Comparisons using the irradiated and non-irradiated neat polymer, and the irradiated and non-irradiated composites were made. The materials obtained were submitted to tensile, flexural and impact tests. Additionally HDT, SEM and XRD analyses were carried out along with the sol–gel analysis which aimed to assess the cross-linking degree of the irradiated materials. Results showed great improvement in most HDPE properties and a high cross-linking degree of 85% as a result of electron-beam irradiation of the material.

  5. Study of process frozen dough of steamed bread added black rice

    International Nuclear Information System (INIS)

    Liu Shuang; Wang Chonglin

    2014-01-01

    The aim of the present work is to extent the storage period of wheat steamed bread added black rice. Based on index of sensory evaluation steamed bread. Effects of the use of film, Effects of electron beam irradiation on processing characteristics of wheat flour, yeast content, fermentation time before frozen, second fermentation time before steaming, combination of differerent additives on bread properties of frozen dough were investigate. The result showed that: the best frozen dough recipe were film processing, l% yeast, 1 h fermentation time before frozen , 45 min second fermentation time before steaming, 0.075% CMC, O.21 % Vc, 0.35% GMS. (authors)

  6. Use of gamma irradiation for microbial inactivation of buckwheat flour and products, 8

    International Nuclear Information System (INIS)

    Muramatu, Nobuyuki; Ohinata, Hiroshi; Karasawa, Hideyuki; Oike, Terutake; Ito, Hitoshi; Ishigaki, Isao.

    1991-01-01

    Effects of irradiation at 3.0-7.0 kGy with 2 MeV electron beams were investigated on the number of microorganisms and quality of buckwheat flour. Electron beams and gamma-rays were compared in terms of the effects on the quality of buckwheat flour. The results were as follows. (1) Electron beams at 3 kGy reduced the number of microorganisms almost to the same level as gamma-rays. Oxygen content in buckwheat flour had no effect on inactivation of microorganisms by irradiation with electron beams and gamma-rays. (2) Peroxide-value (POV) of lipid in buckwheat flour increased with absorbed dose of gamma-rays and electron beams. The increase of POV was suppressed by the usage of oxygen absorber. The color change of buckwheat flour was suppressed by the usage of oxygen absorber as well. Acid-value (AV) of lipid in buckwheat flour was not changed by irradiation at high dose with gamma-rays or electron beams. (3) Maximum torque in Farinograph test of dough prepared from irradiated buckwheat flour decreased with increase of absorbed dose of electron beams. However, oxygen absorber suppressed the change of these properties induced by irradiation. (4) The usage of oxygen absorber resulted in a high sensory score of noodles from irradiated buckwheat flour with small changes of color, flavor and texture. (author)

  7. Texture development in gluten-free breads: Effect of different enzymes and extruded flour

    OpenAIRE

    Martínez, Mario M.; Marcos, Pablo; Gómez, Manuel

    2013-01-01

    Producción Científica One of the main problems with gluten-free breads is their texture and their rapid staling. In this work the influence of different enzymes (one protease, one lipase and two amylases) and of extruded rice flour on rice-bread texture and texture development was studied. For this purpose, the development of firmness, cohesiveness, resilience, springiness and chewiness was modelled and the parameters that define the initial values and the development of these characterist...

  8. THE INFLUENCE OF GLUTEN - FREE FLOURS ON THE QUALITY INDICATORS OF BISCUIT SEMI - FINISHED PRODUCTS

    Directory of Open Access Journals (Sweden)

    К. G. IORGACHOVA

    2016-12-01

    Full Text Available The article is devoted to the research of applicability of gluten-free flours from cereal crops and from by-products of cereal crop processing - ground crumbs sifted out in a process of flake production from rice, corn and millet during the production of biscuit semi-finished products. Taking into account that viscosity is an important technological characteristic of foam-like biscuit dough, as it determines foam strength and dispersed medium stability, the influence of gluten-free flours on the structural and rheological properties of biscuit dough was studied. It is determined that the substitution of wheat flour for cereal flours leads to viscosity reduction of the dough as a consequence of absence of gluten-forming proteins in them. A comparative analysis of changes in viscous properties of biscuit dough based on flour from flakes crumb while warming it up to 60°C with dough based on cereal flours and dough based on wheat flour was held. It is shown that the presence of partially gelatinized starch granules in flour from flake crumb, as a result of technological peculiarities of their extraction, promotes greater demonstration of thickening properties already at the initial stage of baking than in cereal flours. This leads to an increase of dough viscosity and formation of desired rheological characteristics, which provide the porous structure of finished products. To provide the high quality of gluten-free biscuit semi-finished products, the recipe composition of gluten-free biscuit semi-finished product, based on flour mixture from millet flakes crumb, corn and rice flour, was optimized by using the method of mathematical design of experiments.  The porosity indicator was chosen as the criteria for the evaluation of influence of proportion of gluten-free flours on the quality of biscuit semi-finished products. The response surfaces of dependency of biscuit porosity from mass ratio of recipe components in the composite mixture were

  9. Identification of the Rice Wines with Different Marked Ages by Electronic Nose Coupled with Smartphone and Cloud Storage Platform.

    Science.gov (United States)

    Wei, Zhebo; Xiao, Xize; Wang, Jun; Wang, Hui

    2017-10-31

    In this study, a portable electronic nose (E-nose) was self-developed to identify rice wines with different marked ages-all the operations of the E-nose were controlled by a special Smartphone Application. The sensor array of the E-nose was comprised of 12 MOS sensors and the obtained response values were transmitted to the Smartphone thorough a wireless communication module. Then, Aliyun worked as a cloud storage platform for the storage of responses and identification models. The measurement of the E-nose was composed of the taste information obtained phase (TIOP) and the aftertaste information obtained phase (AIOP). The area feature data obtained from the TIOP and the feature data obtained from the TIOP-AIOP were applied to identify rice wines by using pattern recognition methods. Principal component analysis (PCA), locally linear embedding (LLE) and linear discriminant analysis (LDA) were applied for the classification of those wine samples. LDA based on the area feature data obtained from the TIOP-AIOP proved a powerful tool and showed the best classification results. Partial least-squares regression (PLSR) and support vector machine (SVM) were applied for the predictions of marked ages and SVM (R² = 0.9942) worked much better than PLSR.

  10. Identification of the Rice Wines with Different Marked Ages by Electronic Nose Coupled with Smartphone and Cloud Storage Platform

    Directory of Open Access Journals (Sweden)

    Zhebo Wei

    2017-10-01

    Full Text Available In this study, a portable electronic nose (E-nose was self-developed to identify rice wines with different marked ages—all the operations of the E-nose were controlled by a special Smartphone Application. The sensor array of the E-nose was comprised of 12 MOS sensors and the obtained response values were transmitted to the Smartphone thorough a wireless communication module. Then, Aliyun worked as a cloud storage platform for the storage of responses and identification models. The measurement of the E-nose was composed of the taste information obtained phase (TIOP and the aftertaste information obtained phase (AIOP. The area feature data obtained from the TIOP and the feature data obtained from the TIOP-AIOP were applied to identify rice wines by using pattern recognition methods. Principal component analysis (PCA, locally linear embedding (LLE and linear discriminant analysis (LDA were applied for the classification of those wine samples. LDA based on the area feature data obtained from the TIOP-AIOP proved a powerful tool and showed the best classification results. Partial least-squares regression (PLSR and support vector machine (SVM were applied for the predictions of marked ages and SVM (R2 = 0.9942 worked much better than PLSR.

  11. Effect of wood flour content on the optical color, surface chemistry, mechanical and morphological properties of wood flour/recycled high density polyethylene (rHDPE) composite

    Science.gov (United States)

    Sheng, Chan Kok; Amin, Khairul Anuar Mat; Kee, Kwa Bee; Hassan, Mohd Faiz; Ali, E. Ghapur E.

    2018-05-01

    In this study, effect of wood flour content on the color, surface chemistry, mechanical properties and surface morphology of wood-plastic composite (WPC) on different mixture ratios of recycled high density polyethylene (rHDPE) and wood flour were investigated in detail. The presence of wood flour in the composite indicates a significant total color change and a decrease of lightness. Functional groups of wood flour in WPC can be seen clearer from the Fourier transform infrared (FTIR) spectra as the wood flour content increases. The mechanical tensile testing shows that the tensile strength of Young's modulus is improved, whereas the strain and elongation at break were reduced by the addition of wood flour. The gap between the wood flour microvoid fibre and rHDPE matrix becomes closer when the wood flour content is increased as observed by scanning electron microscope (SEM) image. This finding implies a significant improvement on the interaction of interfacial adhesion between the rHDPE matrix and wood flour filler in the present WPC.

  12. Efeito da extrusão sobre a adsorção de água de farinhas mistas pré-gelatinizadas de arroz e bagaço de jabuticaba Effect of extrusion on the water adsorption of pre-gelatinized flours from rice and jabuticaba bagasse

    Directory of Open Access Journals (Sweden)

    Diego P.R. Ascheri

    2006-06-01

    farinhas extrusadas.It was studied the effect of extrusion variables on the water absorption characteristics of pre-gelatinized flours (FME resulting from the extrusion of white rice (FAP and jabuticaba (Myrciaria jaboticaba dried bagasse flour (FBJ. Response surface methodology (RSM type 2³ was used as a predictive mathematical model to evaluate the flour stability. The experimental design was used to study the effect of two levels of FBJ replacement as a fiber source (15 and 25%, two levels of screw speed (100 and 200 rpm and two temperatures of the 3rd heating zone (120 and 180ºC resulting in eight treatments. The water absorption of FME, FAP and FBJ were compared by analysing the absorption isotherms water activity (Aw, which varied from 0.113 to 0.973 at 25ºC. The isotherms experimental data were adjusted to GAB mathematical model, which generated the Xm (equilibrium moisture of the monolayer coefficient applied to RSM as a variable response to evaluate the stability of the pre-gelatinized flours. The results showed the importance of the three variables during the extrusion process. The isotherms curves presented a typical surface hydrophilic characteristic having a sigmoidal type II shape. The region of intermediate moisture revealed that FAP adsorbed higher water content per unit of Aw, followed by FME. FBJ showed the lowest hygroscopic character. Concerning the stability of pre-gelatinized flour, the three extrusion variables were statiscally significant. The stability increased with the increase of FBJ flour content and also with the extruder temperature, whereas it decreased as the screw speed reduced, although with lower effect. The combination of high temperature and FBJ content improves the stability of the extruded flours.

  13. The studies on the preparation of instant noodles from wheat flour supplementing withs weet potato flour

    OpenAIRE

    Taneya, M.L.J.; Biswas, M.M.H.; Shams-Ud-Din, M.

    2014-01-01

    The study reports on the effect of composite flours consisting of wheat and sweet potato flour on the physicochemical and sensory properties of instant noodles. Sweet potato flour was incorporated into wheat flour at flour replacement levels of 0, 10, 20 and 30%. The levels of sweet potato flours increased in the formulations of instant noodle that increased ash, starch, crude fiber and total carbohydrate contents but decreased level of protein. The instant noodles with 20% sweet potato flour...

  14. Impact of variety type and particle size distribution on starch enzymatic hydrolysis and functional properties of tef flours.

    Science.gov (United States)

    Abebe, Workineh; Collar, Concha; Ronda, Felicidad

    2015-01-22

    Tef grain is becoming very attractive in the Western countries since it is a gluten-free grain with appreciated nutritional advantages. However there is little information of its functional properties and starch digestibility and how they are affected by variety type and particle size distribution. This work evaluates the effect of the grain variety and the mill used on tef flour physico-chemical and functional properties, mainly derived from starch behavior. In vitro starch digestibility of the flours by Englyst method was assessed. Two types of mills were used to obtain whole flours of different granulation. Rice and wheat flours were analyzed as references. Protein molecular weight distribution and flour structure by SEM were also analyzed to justify some of the differences found among the cereals studied. Tef cultivar and mill type exhibited important effect on granulation, bulking density and starch damage, affecting the processing performance of the flours and determining the hydration and pasting properties. The color was darker although one of the white varieties had a lightness near the reference flours. Different granulation of tef flour induced different in vitro starch digestibility. The disc attrition mill led to higher starch digestibility rate index and rapidly available glucose, probably as consequence of a higher damaged starch content. The results confirm the adequacy of tef flour as ingredient in the formulation of new cereal based foods and the importance of the variety and the mill on its functional properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Formulation of gluten-free flour culinary products of high nutritional value

    Directory of Open Access Journals (Sweden)

    Y. P. Dombrovskaya

    2016-01-01

    Full Text Available The article is devoted to the production of gluten-free foods that are necessary for people suffering from this disease as celiac disease. The article reveals the relevance of developing recipes for gluten-free foods, which are not inferior to traditional in many respects. Classic recipes gluten-free bakery products, mainly based on rice, buckwheat, corn flour, which have little nutritional value. In this regard, the current development of technologies and formulations pastry dishes with use of nonconventional vegetable raw materials rich in dietary fibers, proteins and other beneficial substances that improve the biological and nutritional value of these products. The paper describes the formulation of gluten-free muffins, was based on the recipe of the cake "Capital". The main raw material for the new compositions of selected rice flour, and as enriching additives – flax flour and flour from the eggshell. Was conducted baking tests on the basis of which was chosen percentage of the input substances and the assessment of quality of semifinished and finished products. The quality of semi-finished products was evaluated by such indicators as humidity and the microstructure of the test. The quality of finished products was assessed using organoleptic and physical-chemical parameters, the results presented in the tables. Investigated the antioxidant activity of products. Produced sensometrical evaluation of aroma of control and experimental samples. Calculated chemical composition. The content of protein, vitamins, mineral substances in the experimental sample is significantly increased compared to control. Making flour egg shell has achieved the ratio of Ca-Mg-P as close to a perfect 1:0,39:1,53 Replacement of wheat flour with flaxseed and rice flour and the introduction of egg shell improve the amino acid composition of the product. The biological value increased by 2.3%.

  16. Effect of amaranth flour (Amaranthus mantegazzianus) on the technological and sensory quality of bread wheat pasta.

    Science.gov (United States)

    Martinez, Cristina S; Ribotta, Pablo D; Añón, María Cristina; León, Alberto E

    2014-03-01

    The technological and sensory quality of pasta made from bread wheat flour substituted with wholemeal amaranth flour (Amaranthus mantegazzianus) at four levels, 15, 30, 40 and 50% w/w was investigated. The quality of the resulted pasta was compared to that of control pasta made from bread wheat flour. The flours were analyzed for chemical composition and pasting properties. Cooking behavior, color, raw and cooked pasta texture, scanning electron microscopy and sensory evaluation were determined on samples. The pasta obtained from amaranth flour showed some detriment of the technological and sensory quality. So, a maximum substitution level of 30% w/w was defined. This is an equilibrium point between an acceptable pasta quality and the improved nutritional and functional properties from the incorporation of amaranth flour.

  17. Changes in the texture and viscoelastic properties of bread containing rice porridge during storage.

    Science.gov (United States)

    Tsai, Chia-Ling; Sugiyama, Junichi; Shibata, Mario; Kokawa, Mito; Fujita, Kaori; Tsuta, Mizuki; Nabetani, Hiroshi; Araki, Tetsuya

    2012-01-01

    The objective of this study was to investigate the effects of rice porridge on the texture and viscoelastic properties of bread during storage. Three types of bread, wheat flour bread, 15% rice flour bread, and 15% rice porridge bread, were prepared. After baking and storing the bread for 24 h, 48 h, and 72 h at room temperature, we measured the texture and viscoelastic properties of the bread crumbs by texture profile analysis (TPA) and creep test. The 15% rice porridge bread showed a significantly higher specific volume and maintained softer crumbs than the other two types (pbread crumbs during storage.

  18. Influence of maize flour particle size on gluten-free breadmaking.

    Science.gov (United States)

    de la Hera, Esther; Talegón, María; Caballero, Pedro; Gómez, Manuel

    2013-03-15

    Maize, one of the suitable grains for coeliac consumption, is, together with rice, the most cultivated cereal in the world. However, the inclusion of maize flour in gluten-free bread is a minority and studies are scarce. This paper analyses the influence of different maize flour types and their particle sizes on the quality of two types of bread without gluten (80% and 110% water in the formulation) obtained from them. We also analysed the microstructure of the dough and its behaviour during the fermentation. Finer flours had a lower dough development during fermentation in all cases. Among the different types of flour, those whose microstructure revealed compact particles were those which had higher specific bread volume, especially when the particle size was greater. Among the formulations, the dough with more water gave breads with higher specific volume, an effect that was more important in more compact flours. The higher volume breads had lower values of hardness and resilience. The type of corn flour and mainly its particle size influence significantly the dough development of gluten-free bread during fermentation and therefore the final volume and texture of the breads obtained. The flours having coarser particle size are the most suitable for making gluten-free maize bread. © 2012 Society of Chemical Industry.

  19. Committed effective dose determination in southern Brazilian cereal flours.

    Science.gov (United States)

    Scheibel, V; Appoloni, C R

    2013-01-01

    The health impact of radionuclide ingestion from foodstuffs was evaluated by the committed effective doses determined in eight commercial samples of South-Brazilian cereal flours (soy, wheat, cornmeal, cassava, rye, oat, barley and rice flours). The radioactivity traces of (228)Th, (228)Ra, (226)Ra, (40)K, (7)Be and (137)Cs were measured by gamma-ray spectrometry employing an HPGe detector of 66 % relative efficiency. The efficiency curve has taken into account the differences in densities and chemical composition between the matrix and the certified sample. The highest concentration levels of (228)Th and (40)K were 3.5±0.4 and 1469±17 Bq kg(-1) for soy flour, respectively, within the 95 % confidence level. The lower limit of detection for (137)Cs ranged from 0.04 to 0.4 Bq kg(-1). The highest committed effective dose was 0.36 μSv.y(-1) for (228)Ra in cassava flour (adults). All committed effective doses determined at the present work were lower than the International Atomic Energy Agency dose limit of 1 mSv.y(-1), to the public exposure.

  20. Committed effective dose determination in southern Brazilian cereal flours

    International Nuclear Information System (INIS)

    Scheibel, V.; Appoloni, C. R.

    2013-01-01

    The health impact of radionuclide ingestion from foodstuffs was evaluated by the committed effective doses determined in eight commercial samples of South-Brazilian cereal flours (soy, wheat, cornmeal, cassava, rye, oat, barley and rice flours). The radioactivity traces of 228 Th, 228 Ra, 226 Ra, 40 K, 7 Be and 137 Cs were measured by gamma-ray spectrometry employing an HPGe detector of 66 % relative efficiency. The efficiency curve has taken into account the differences in densities and chemical composition between the matrix and the certified sample. The highest concentration levels of 228 Th and 40 K were 3.5±0.4 and 1469±17 Bq kg -1 for soy flour, respectively, within the 95 % confidence level. The lower limit of detection for 137 Cs ranged from 0.04 to 0.4 Bq kg -1 . The highest committed effective dose was 0.36 μSv.y -1 for 228 Ra in cassava flour (adults). All committed effective doses determined at the present work were lower than the International Atomic Energy Agency dose limit of 1 mSv.y -1 , to the public exposure. (authors)

  1. Reinforcement of natural rubber/high density polyethylene blends with electron beam irradiated liquid natural rubber-coated rice husk

    Energy Technology Data Exchange (ETDEWEB)

    Chong, E.L.; Ahmad, Ishak [Polymer Research Center (PORCE), School of Chemical Science and Food Technology, Universiti Kebangsaan Malaysia 4, 43600 UKM Bangi, Selangor Darul Ehsan (Malaysia); Dahlan, H.M. [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang, Selangor Darul Ehsan (Malaysia); Abdullah, Ibrahim, E-mail: dia@ukm.m [Polymer Research Center (PORCE), School of Chemical Science and Food Technology, Universiti Kebangsaan Malaysia 4, 43600 UKM Bangi, Selangor Darul Ehsan (Malaysia)

    2010-08-15

    Coating of rice husk (RH) surface with liquid natural rubber (LNR) and exposure to electron beam irradiation in air were studied. FTIR analysis on the LNR-coated RH (RHR) exposed to electron beam (EB) showed a decrease in the double bonds and an increase in hydroxyl and hydrogen bonded carbonyl groups arising from the chemical interaction between the active groups on RH surface with LNR. The scanning electron micrograph showed that the LNR formed a coating on the RH particles which transformed to a fine and clear fibrous layer at 20 kGy irradiation. The LNR film appeared as patches at 50 kGy irradiation due to degradation of rubber. Composites of natural rubber (NR)/high density polyethylene (HDPE)/RHR showed an optimum at 20-30 kGy dosage with the maximum stress, tensile modulus and impact strength of 6.5, 79 and 13.2 kJ/m{sup 2}, respectively. The interfacial interaction between the modified RH and TPNR matrix had improved on exposure of RHR to e-beam at 20-30 kGy dosage.

  2. 21 CFR 137.175 - Phosphated flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Phosphated flour. 137.175 Section 137.175 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Related Products § 137.175 Phosphated flour. Phosphated flour, phosphated white flour, and phosphated...

  3. Cyclic electron flow may provide some protection against PSII photoinhibition in rice (Oryza sativa L.) leaves under heat stress.

    Science.gov (United States)

    Essemine, Jemaa; Xiao, Yi; Qu, Mingnan; Mi, Hualing; Zhu, Xin-Guang

    2017-04-01

    Previously we have shown that a quick down-regulation in PSI activity compares to that of PSII following short-term heat stress for two rice groups including C4023 and Q4149, studied herein. These accessions were identified to have different natural capacities in driving cyclic electron flow (CEF) around PSI; i.e., low CEF (lcef) and high CEF (hcef) for C4023 and Q4149, respectively. The aim of this study was to investigate whether these two lines have different mechanisms of protecting photosystem II from photodamage under heat stress. We observed a stepwise alteration in the shape of Chl a fluorescence induction (OJIP) with increasing temperature treatment. The effect of 44°C treatment on the damping in Chl a fluorescence was more pronounced in C4023 than in Q4149. Likewise, we noted a disruption in the I-step, a decline in the F v due to a strong damping in the F m , and a slight increase in the F 0 . Normalized data demonstrated that the I-step seems more susceptible to 44°C in C4023 than in Q4149. We also measured the redox states of plastocyanin (PC) and P 700 by monitoring the transmission changes at 820nm (I 820 ), and observed a disturbance in the oxidation/reduction kinetics of PC and P 700 . The decline in the amplitude of their oxidation was shown to be about 29% and 13% for C4023 and Q4149, respectively. The electropotential component (Δφ) of ms-DLE appeared more sensitive to temperature stress than the chemical component (ΔpH), and the impact of heat was more evident and drastic in C4023 than in Q4149. Under heat stress, we noticed a concomitant decline in the primary photochemistry of PSII as well as in both the membrane energization process and the lumen protonation for both accessions, and it is evident that heat affects these parameters more in C4023 than in Q4149. All these data suggest that higher CET can confer higher photoprotection to PSII in rice lines, which can be a desirable trait during rice breeding, especially in the context of a

  4. The effects of water and sucrose contents on the physicochemical properties of non-directly expanded rice flour extrudates Os efeitos do teor de água e de sacarose nas propriedades físico-químicas de extrusados não expandidos de arroz

    Directory of Open Access Journals (Sweden)

    Marcia Cristina da Silva

    2009-09-01

    Full Text Available Rice flour was processed by extrusion cooking in the presence of variable contents of water and sucrose. The process was carried out in a twin-screw extruder under the conditions given by a centre rotational experimental design of second order. The effects of the independent variables, water content (27.9 to 42.1%, and sucrose content (0.1 to 19.9% on the physicochemical properties of the extrudates were investigated. The water absorption index (WAI, water solubility index (WSI, volumetric expansion index (VEI, and bulk density (BD were determined as dependent variables. BD was determined for samples before and after frying. An increase in water contents resulted in higher WAI and VEI, and lower WSI and BD for extrudates before and after frying. Higher sucrose levels led to increased values of WAI and VEI and to reduced values of WSI and BD. Both independent variables had significant influence on the physicochemical properties of rice flour extrudates. However, the sucrose content was the most significant. The interaction between these two independent variables and their quadratic effect were also important for the responses studied.A farinha de arroz foi extrusada em presença de diferentes teores de água e sacarose. O processamento foi realizado em extrusora dupla-rosca, sob condições fornecidas por um delineamento experimental rotacional de segunda ordem. Os efeitos das variáveis independentes, teor de água (27,9 a 42,1% e teor de sacarose (0,1 a 19,9%, sobre as propriedades físico-químicas dos extrusados, foram estudados. As variáveis dependentes avaliadas foram o índice de absorção de água (WAI, o índice de solubilidade em água (WSI, o índice de expansão volumétrica (VEI e a densidade aparente (BD. A densidade aparente (BD foi determinada para os extrusados antes e depois do processo de fritura. O aumento no teor de água resultou em maiores valores de WAI e VEI e menores valores de WSI e de BD (para as amostras fritas e n

  5. Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion Caracterização tecnológica de misturas pré-cozidas de arroz com café por extrusão termoplástica

    Directory of Open Access Journals (Sweden)

    Reginaldo Ferreira da Silva

    2013-03-01

    Full Text Available Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German and the effect of the extrusion process on the variables moisture content (16%, 18% and 20% and temperature in the third extruding zone (140 °C, 160 °C and 180 °C was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.O Brasil é um país de tradição na produção e consumo de café, porém, parte do consumo do café é na forma de bebida. O objetivo deste estudo foi elaborar uma farinha mista instantânea de pó de café com arroz para uso no preparo de bebidas e produtos panificáveis como bolos e biscoitos tipo cookies com sabor de café. Misturas nas proporções de 900:100, 850:150 e 800:200 g de arroz e café, respectivamente, foram processadas em uma extrusora Brabender DS-20 (Duisburg, Alemanha de parafuso simples, e foi estudado o efeito do processo de extrusão das variáveis umidade da mistura (16%, 18% e 20% e temperatura na 3° zona (140, 160 e 180 °C. Os resultados observados para as variáveis respostas,

  6. Effect of soaking and phytase treatment on phytic acid, calcium, iron and zinc in rice fractions

    NARCIS (Netherlands)

    Liang, J.; Han, B.Z.; Nout, M.J.R.; Hamer, R.J.

    2009-01-01

    With the aim to maximise phytic acid removal and minimise losses of dry matter and minerals (Ca, Fe, Zn) in rice, three products (whole kernels and flour milled from white and brown rice; and bran, all from the same batch of variety Kenjian 90-31) were soaked in demineralized water at 10 °C (SDW),

  7. 21 CFR 137.200 - Whole wheat flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Whole wheat flour. 137.200 Section 137.200 Food... Flours and Related Products § 137.200 Whole wheat flour. (a) Whole wheat flour, graham flour, entire wheat flour is the food prepared by so grinding cleaned wheat, other than durum wheat and red durum...

  8. Physical-chemical characterization of quinoa (Chenopodium quinoa Willd., amaranth (Amaranthus caudatus L., and chia (Salvia hispanica L. flours and seeds

    Directory of Open Access Journals (Sweden)

    Olga Lucía Torres Vargas

    2018-04-01

    Full Text Available Quinoa, amaranth, and chia flours have considerable amounts of protein, starch, dietary fiber, lipids, minerals, vitamins, and bioactive components, which provide in them exceptional properties for human nutrition. The aim of this research was the physical-chemical characterization of quinoa, amaranth, and chia flours and seeds through proximal, optical, functional, thermal, and structural analyses. From the results obtained during the proximal analysis, considerable proportions were determined of protein and fiber for the three flours, with the highest values in chia flour at 28.56% and 39.8%, respectively. These results were corroborated by optical microscopy analysis performed on longitudinal cuts in the three types of seeds. Thermal parameters indicated that the three flours presented irreversible thermal degradation processes and glass transition change for amaranth and chia flours at temperatures above 100ºC. Structural characterization of the flours via FTIR have allowed detecting differences in protein and lipid characteristic absorption bands. Diffraction patterns of type A starch were identified for quinoa and amaranth flours, while the chia flour had two crystalline peaks corresponding to calcium and magnesium. Scanning electron microscopy images showed starch aggregates in the quinoa flour, a complex structure composed of spherical proteins that surround the starches in amaranth flour and fibrous structures and spherical proteins in chia flour.

  9. Assaying total carotenoids in flours of corn and sweet potato flours by laser photoacoustic spectroscopy

    NARCIS (Netherlands)

    Luterotti, S.; Bicanic, D.D.; Kijak, K.; Grbesa, D.; Martinez, E.; Spruijt, R.B.

    2011-01-01

    This study describes the application of the laser photoacoustic spectroscopy (PAS) for quantification of total carotenoids (TC) in corn flours and sweetpotato flours. Overall, thirty-three different corn flours and nine sweetpotato flours were investigated. All PAS measurements were performed at

  10. Physical and chemical characterization of composite flour from canna flour (Canna edulis) and lima bean flour (Phaseolus lunatus)

    Science.gov (United States)

    Praseptiangga, Danar; Tryas, Anisha Ayuning; Affandi, Dian Rachmawanti; Atmaka, Windi; Ariyantoro, Achmad Ridwan; Minardi, Slamet

    2018-02-01

    The diversity of Indonesian local food sources has potential to be developed for supporting food security based development of local food diversification. Canna tubers (Canna edulis) and lima beans (Phaseolus lunatus) are two local commodities in Indonesia which under is utilization and has limited assessment to its characteristics. This study aimed at determining the best formula of composite flour based on physical and chemical properties of composite flour produced. There were three formulas, F1 for 85% of canna flour and 15%of lima beans flour, F2 for 70% of canna flour and 30% of lima beans flour and F3 for 55% of canna flour and 45% of lima beans flour. Physical and chemical analyses were conducted and completely randomized design was used. De Garmo analysis was then used to determine the highest effectiveness index from the three formulas developed in this study and F3 demonstrated the highest effectiveness index (0.545) among three formulas evaluated. Thus, formula (F3) was selected as the best composite of the flour developed from canna flour and lima beans flour.

  11. Effect of different flours on quality of legume cakes to be baked in microwave-infrared combination oven and conventional oven.

    Science.gov (United States)

    Ozkahraman, Betul Canan; Sumnu, Gulum; Sahin, Serpil

    2016-03-01

    The objective of this study was to compare the quality of legume cakes baked in microwave-infrared combination (MW-IR) oven with conventional oven. Legume cake formulations were developed by replacing 10 % wheat flour by lentil, chickpea and pea flour. As a control, wheat flour containing cakes were used. Weight loss, specific volume, texture, color, gelatinization degree, macro and micro-structure of cakes were investigated. MW-IR baked cakes had higher specific volume, weight loss and crust color change and lower hardness values than conventionally baked cakes. Larger pores were observed in MW-IR baked cakes according to scanning electron microscope (SEM) images. Pea flour giving the hardest structure, lowest specific volume and gelatinization degree was determined to be the least acceptable legume flour. On the other hand, lentil and chickpea flour containing cakes had the softest structure and highest specific volume showing that lentil and chickpea flour can be used to produce functional cakes.

  12. [Cooking quality of pastas supplemented with rice bran].

    Science.gov (United States)

    Sangronis, E; Cafiero, J; Mosqueda, M

    1997-06-01

    The purpose of this study was to evaluate the quality during and after cooking of four pastas spaghetti type. Rice bran was used as ingredient in order to increase protein and dietetic fiber content. In two of the four formulation, semolina durum was supplemented with 10 and 20% rice bran. In the other two formulation granular flour was supplemented with 10 and 20% rice bran. Time cooking, water absorbtion, solid loss, color and hardness, (instrumental and sensory), Protein Efficiency Ratio (PER) and Apparent Digestibility in vivo were determined. Acceptability was evaluated by a 35-member consumer panel. Rice bran improved solid loss during cooking and increased cooking time, PERs were not affected significantly but Apparent Digestibility decreased when rice bran was increased. Sensory quality was affected because rice bran made pastas hard and dark but they were comparable to high fiber pasta existing in market.

  13. Rice microstructure

    Science.gov (United States)

    An understanding of plant structure is desirable to obtain a clear idea of the overall impact of a crop. A mature rice plant consists of leafy components (left in the field post-harvest) and paddy rice (collected). The rice plant is supported by a hollow stem (culm) with leaf sheaths attached to nod...

  14. Committed effective dose determination in cereal flours by gamma-ray spectrometry

    International Nuclear Information System (INIS)

    Scheibel, Viviane

    2006-01-01

    The health impact from radionuclides ingestion of foodstuffs was evaluated by the committed effective doses determined in commercial samples of South-Brazilian cereal flours (soy, wheat, corn, manioc, rye, oat, barley and rice flour). The radioactivity traces of 228 Th, 228 Ra, 226 Ra, 40 K, 7 Be and 137 Cs were measured by gamma-ray spectrometry employing a 66% relative efficiency HPGe detector. The energy resolution for the 1332.46 keV line of 60 Co was 2.03 keV. The committed effective doses were calculated with the activities analyzed in the present flour samples, the foodstuff rates of consumption (Brazilian Institute of Geography and Statistics) and the ingestion dose coefficients (International Commission of Radiological Protection). The reliability median activities were verified with χ 2 tests, assuring the fittings quality. The highest concentration levels of 228 Th and 40 K were 3.5 ± 0.4 and 1469 ± 17 Bq.kg -1 for soy flour, respectively, with 95% of confidence level. The lower limit of detection for 137 Cs ranged from 0.04 to 0.4 Bq.kg -1 . The highest committed effective dose was 0.36 μSv.y -1 for 228 Ra in manioc flour (adults). All committed effective doses determined at the present work were lower than the UNSCEAR limits of 140 μSv.y -1 and much lower than the ICRP (1991) limits of 1 mSv.y -1 , for general public. There are few literature references for natural and artificial radionuclides in foodstuffs and mainly for committed effective doses. This work brings the barley flour data, which is not present at the literature and 7 Be data which is not encountered in foodstuffs at the literature, besides all the other flours data information about activities and committed effective doses. (author)

  15. Effect of rice bran supplementation on cookie baking quality

    International Nuclear Information System (INIS)

    Younis, A.; Bhatti, M.S.; Ahmed, A

    2011-01-01

    Rice bran, a by-product obtained during polishing of un-milled rice, contains a large quantity of essential nutrients such as minerals, vitamins, fiber, amino acids and antioxidants. Supplementation of rice bran in cookies can improve their nutritional value. In the present study, cookies were prepared from wheat flour with supplementation of rice bran at the rate of 5, 10, 15 and 20 percent. The rice bran was stabilized with acid and dry heat treatment before supplementation. Chemical analysis of the cookies revealed that there was no significant difference in chemical and physical properties of cookies supplemented with acid stabilized rice bran (ASRB) and heat stabilized rice bran (HSRB). The moisture, crude protein, fat and mineral contents were significantly increased with the increment of rice bran. Average width, thickness and spread factor of cookies also increased with the increase in percentage of rice bran. Sensory evaluation of cookies showed that scores for color of cookies decreased significantly with increase in level of rice bran and sensory scores were significantly higher in the cookies prepared with HSRB. However the decrease was non-significant at 10 percent level of substitution. Highest scores for overall acceptability of supplemented cookies was recorded at 15 percent level of substitution as compared to other treatments. Hence it is concluded from the results that supplementation of HSRB at the rate of 10 percent is more suitable for production of rice bran supplemented cookies. (author)

  16. Pasta quality as impacted by the type of flour and starch and the level of egg addition.

    Science.gov (United States)

    Saleh, Mohammed; Al-Ismail, Khalid; Ajo, Radwan

    2017-10-01

    This study investigated the effects of substituting wheat flour with fractions of different starch types and egg levels on pasta quality. First order mixture response surface model was used where the effects of various starch types and egg levels on pasta quality were evaluated. Coefficients of estimation were determined and fractional contribution of wheat, starch type and egg levels were evaluated. Egg levels negatively (p egg level from 33 to 0%. Flow behavior index of treatments solution with various fractions of starch types and egg level ranged from 0.34 to 1.42 and was significantly (p cooked pasta quality including firmness, stickiness, cooking loss, and water uptake, keeping with consumer acceptability through varying starch type and egg level. Results show that flour and starch type and egg level interaction play significant role in pasta blends formulation. Moreover, substitution of wheat flour with acorn, native or modified corn and potato starches fractions, as well as with lupine, rice, tapioca, and stabilized rice bran flours would have significant effects on the physical properties and acceptability of various cereal products. For instance, the use of rice bran in potentially developed products would enhance the consumption of whole grain foods, resulting in improved intake of fiber and other healthy components. © 2016 Wiley Periodicals, Inc.

  17. 21 CFR 137.215 - Yellow corn flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Yellow corn flour. 137.215 Section 137.215 Food... Flours and Related Products § 137.215 Yellow corn flour. Yellow corn flour conforms to the definition and standard of identity prescribed by § 137.211 for white corn flour except that cleaned yellow corn is used...

  18. 21 CFR 137.205 - Bromated whole wheat flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bromated whole wheat flour. 137.205 Section 137... Cereal Flours and Related Products § 137.205 Bromated whole wheat flour. Bromated whole wheat flour... of ingredients, prescribed for whole wheat flour by § 137.200, except that potassium bromate is added...

  19. Correlation of concentration of modified cassava flour for banana fritter flour using simple linear regression

    Science.gov (United States)

    Herminiati, A.; Rahman, T.; Turmala, E.; Fitriany, C. G.

    2017-12-01

    The purpose of this study was to determine the correlation of different concentrations of modified cassava flour that was processed for banana fritter flour. The research method consists of two stages: (1) to determine the different types of flour: cassava flour, modified cassava flour-A (using the method of the lactid acid bacteria), and modified cassava flour-B (using the method of the autoclaving cooling cycle), then conducted on organoleptic test and physicochemical analysis; (2) to determine the correlation of concentration of modified cassava flour for banana fritter flour, by design was used simple linear regression. The factors were used different concentrations of modified cassava flour-B (y1) 40%, (y2) 50%, and (y3) 60%. The response in the study includes physical analysis (whiteness of flour, water holding capacity-WHC, oil holding capacity-OHC), chemical analysis (moisture content, ash content, crude fiber content, starch content), and organoleptic (color, aroma, taste, texture). The results showed that the type of flour selected from the organoleptic test was modified cassava flour-B. Analysis results of modified cassava flour-B component containing whiteness of flour 60.42%; WHC 41.17%; OHC 21.15%; moisture content 4.4%; ash content 1.75%; crude fiber content 1.86%; starch content 67.31%. The different concentrations of modified cassava flour-B with the results of the analysis provides correlation to the whiteness of flour, WHC, OHC, moisture content, ash content, crude fiber content, and starch content. The different concentrations of modified cassava flour-B does not affect the color, aroma, taste, and texture.

  20. Functional suitability of commercially milled rice bran in India for use in different food products.

    Science.gov (United States)

    Sekhon, K S; Dhillon, S S; Singh, N; Singh, B

    1997-01-01

    The effect of blending of commercially available full fat and defatted rice brans in India from modern multistage rice mills with parboiling/stabilizing facilities in different food products in comparison to those obtained from laboratory milling of rice is reported. Bread volume and cookie spread decreased but muffin volume increased with the addition of different types of bran to wheat flour, however, the cookie spread factor was not affected by addition of full fat rice bran. The yields of the extrudate were increased by the blending of full fat rice bran but were decreased by the addition of defatted rice bran. Rice brans could be added to different food products to the extent of 5-10%. However, the full fat rice bran could not be used for production of extruded snack food.

  1. [Quality of pastas supplemented with rice bran].

    Science.gov (United States)

    Sangronis, E; Rebolledo, M A

    1997-06-01

    The objective of this research was to investigate the potential of using rice bran as an ingredient in pastas spaghetti type. Two of the pastas were made with semolina from durum as raw material, supplemented with 10 and 20% rice bran. The other two were made with granular flour and the same percentage of rice bran. Proximate composition of raw material was analyzed. Pastas were elaborated in a local industry. Composition, proximal, color, texture, and sensorial quality of pastas were determined. Protein content (13.9-15.0%), ash (1.47-3.09%) and dietary fiber (6.71-8.45%) of pastas increased according to the percentage of rice bran added. The hardest pastas were those elaborated with semolina from durum wheat and with a 10% of substitution. Also, they were the most yellow. The sensory panel found differences in quality among the pastas evaluated. Pastas with 10% rice bran had the best quality. The results demonstrated that is possible to elaborate pastas with 20% as maximum of rice bran resulting products with high protein, ash and dietetic fiber content, but some undesirable characteristics were given by the rice bran as white spots, wrinkles and color changes.

  2. Hydrothermal synthesis of zinc oxide nanoparticles using rice as soft biotemplate.

    Science.gov (United States)

    Ramimoghadam, Donya; Bin Hussein, Mohd Zobir; Taufiq-Yap, Yun Hin

    2013-01-01

    Rice as a renewable, abundant bio-resource with unique characteristics can be used as a bio-template to synthesize various functional nanomaterials. Therefore, the effect of uncooked rice flour as bio-template on physico-chemical properties, especially the morphology of zinc oxide nanostructures was investigated in this study. The ZnO particles were synthesized through hydrothermal-biotemplate method using zinc acetate-sodium hydroxide and uncooked rice flour at various ratios as precursors at 120°C for 18 hours. The results indicate that rice as a bio-template can be used to modify the shape and size of zinc oxide particles. Different morphologies, namely flake-, flower-, rose-, star- and rod-like structures were obtained with particle size at micro- and nanometer range. Pore size and texture of the resulting zinc oxide particles were found to be template-dependent and the resulting specific surface area enhanced compared to the zinc oxide synthesized without rice under the same conditions. However, optical property particularly the band gap energy is generally quite similar. Pure zinc oxide crystals were successfully synthesized using rice flour as biotemplate at various ratios of zinc salt to rice. The size- and shape-controlled capability of rice to assemble the ZnO particles can be employed for further useful practical applications.

  3. Flour production from shrimp by-products and sensory evaluation of flour-based products

    Directory of Open Access Journals (Sweden)

    Thiago Mendes Fernandes

    2013-08-01

    Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

  4. Antioxidant Capacity, Mineral Content and Sensory Properties of Gluten-Free Rice and Buckwheat Cookies

    Directory of Open Access Journals (Sweden)

    Mladenka Pestorić

    2015-01-01

    Full Text Available Light buckwheat flour was used to substitute rice fl our at the level of 10, 20 and 30 % to produce gluten-free cookies. The substitution of gluten-free cookie formulation with light buckwheat fl our contributed to the signifi cantly higher mineral content, especially magnesium, potassium, iron and copper, in comparison with the control rice cookies (p<0.05. Gluten-free cookies made with rice fl our and buckwheat fl our exhibited signifi cantly higher total phenolic and rutin content, scavenging activity against 1,1-diphenyl 2-picrylhydrazyl radicals (DPPH•, antioxidant activity and reducing power than the control cookies (p<0.05. Comparing all evaluated sensory properties, cookies containing 20 % of light buckwheat flour had the most acceptable sensory properties. The obtained results of principal component analysis showed that the cookies with 20 and 30 % buckwheat flour had better antioxidant and sensory properties in comparison with other two cookie samples.

  5. Antioxidant activity of wheat and buckwheat flours

    Directory of Open Access Journals (Sweden)

    Sedej Ivana J.

    2010-01-01

    Full Text Available Antioxidative activities of wheat flours (type 500 and wholegrain and buckwheat flours (light and wholegrain were tested using 1,1-diphenyl-2-picrylhydrazyl (DPPH·-scavenging activity, reducing power and chelating activity on Fe2+. Also, the content of the total phenolics of ethanolic extracts was estimated. Polyphenolics content (expressed as gallic acid equivalent, GAE in wheat flours varied between 37.1 and 137.2 μg GAE/g extract, while its content in buckwheat flour were at least four time higher and ranged between 476.3 and 618.9μg GAE/g extract. Ethanolic extracts of buckwheat flours exhibited higher antioxidant activities in all the assays, except for chelating activity. Regarding all the obtained results, it can be concluded that bakery products produced with buckwheat flour could be regarded as potential functional foods.

  6. Influence of mango mesocarp flour supplement to micronutrient ...

    African Journals Online (AJOL)

    Influence of mango mesocarp flour supplement to micronutrient, physical and organoleptic qualities of wheat-based bread. ... Mango mesocarp flour was incorporated into wheat flour at 15, 20 and 30% levels to ... HOW TO USE AJOL.

  7. Development beer technology with amaranth flour

    Directory of Open Access Journals (Sweden)

    M. M. Danina

    2016-01-01

    Full Text Available At the present time, the urgent problem is the development of product range of beer and the reduction of production costs. We used amaranth flour: "protein" and "carbohydrate", is designed and experimentally obtained from seeds of amaranth and made available for research "Agros" company (Kaliningrad region. The article discusses the effects of different concentrations of flour on the process of mashing, fermentation and the quality of beer. Prepared in the ratio of light barley malt:amaranth flour 90:10 and 80:20, respectively. Experimental were chosen of mashing barley malt with the addition of flour. The mashing process started with a temperature of 40 or 500C. Cytolytic pause was 30 min, protein-25 min, malt pause was increased up to 30 min. Using 20% of flour in the total grain charge leads to the increase of first wort extract content to 12.2%. By increasing the amount of flour in the grist of grain products increases the saccharification of the mash. The time of saccharification when you make 20% of the "protein" flour and the initial temperature of mashing 500C is 26 minutes, and "carbohydrate" flour -18min., therefore, when developing technology of new beer, from the point of view of reducing the cost of production, it is advisable to use "carbohydrate" amaranth flour in the amount of 20% in the total grain products. We estimated the impact of concentrations used flour on organoleptic indicators of finished beer on a 25 point scale. The aroma of the beer was felt citrus and malt undertones. Total score of beer with 10% amaranth flour is 18 points, and 20% amaranth flour is 20 points.

  8. Characterization of cookies made from wheat flour blended with buckwheat flour and effect on antioxidant properties.

    Science.gov (United States)

    Jan, Ulfat; Gani, Adil; Ahmad, Mudasir; Shah, Umar; Baba, Waqas N; Masoodi, F A; Maqsood, Sajid; Gani, Asir; Wani, Idress Ahmed; Wani, S M

    2015-10-01

    Buckwheat flour was incorporated into wheat flour at different levels (0, 20, 40, 60, 80, and 100 %) and the physicochemical, functional and antioxidant properties of the blended flour were studied. This study also investigated the effect of buckwheat on the retention of antioxidant properties of cookies during baking. The results showed significant variation in physicochemical and functional properties of the blended flour. The addition of buckwheat flour into wheat flour also increased the antioxidant properties of blended flour proportionally, but metal chelating properties decreased. The incorporation of buckwheat in wheat flour helped in better retention of antioxidant potential of cookies during baking process as buckwheat cookies (100 % buckwheat) showed greater percentage increase in antioxidant properties than control (100 % wheat). Quality characteristics of cookies such as hardness and spread ratio decreased, while as non-enzymatic browning (NEB) increased significantly with increase in the proportion of buckwheat flour in wheat flour. The Overall acceptability of cookies by sensory analysis was highest at 40 % level of blending. This study concluded that addition of buckwheat in wheat flour, may not only improve the physico-chemical and functional properties of the blended flour but may also enhance the nutraceutical potential of the product prepared from it.

  9. Optimization of mold wheat bread fortified with soy flour, pea flour and whey protein concentrate.

    Science.gov (United States)

    Erben, Melina; Osella, Carlos A

    2017-07-01

    The objective of this work was to study the effect of replacing a selected wheat flour for defatted soy flour, pea flour and whey protein concentrate on both dough rheological characteristics and the performance and nutritional quality of bread. A mixture design was used to analyze the combination of the ingredients. The optimization process suggested that a mixture containing 88.8% of wheat flour, 8.2% of defatted soy flour, 0.0% of pea flour and 3.0% of whey protein concentrate could be a good combination to achieve the best fortified-bread nutritional quality. The fortified bread resulted in high protein concentration, with an increase in dietary fiber content and higher calcium levels compared with those of control (wheat flour 100%). Regarding protein quality, available lysine content was significantly higher, thus contributing with the essential amino acid requirement.

  10. Enrichment of gluten-free cakes with lupin (Lupinus albus L.) or buckwheat (Fagopyrum esculentum M.) flours.

    Science.gov (United States)

    Levent, Hacer; Bilgiçli, Nermin

    2011-11-01

    In the present study, the effect of debittered lupin flour (LF) and whole buckwheat flour (BF) on the nutritional and sensory quality of gluten-free cake was studied. LF (10, 20, 30 and 40%) and BF (5, 10, 15 and 20%) were partially replaced with corn starch and rice flour mixture (1:1 w/w) in the gluten-free cake recipe. LF increased the protein, calcium, iron, manganese, phosphorus and zinc contents of the cakes, while BF caused a significant increase (P cakes. According to the overall acceptability rating, it was concluded that gluten-free cake could be produced with satisfactory results by the addition of LF and BF up to 30% and 10%, respectively.

  11. Optimization of barrel temperature and kidney bean flour percentage based on various physical properties of extruded snacks.

    Science.gov (United States)

    Agathian, G; Semwal, A D; Sharma, G K

    2015-07-01

    The aim of the experiment was to optimize barrel temperature (122 to 178 ± 0.5 °C) and red kidney bean flour percentage (KBF) (12 to 68 ± 0.5 %) based on physical properties of extrudates like flash off percentage, water absorption index (WAI), water solubility index (WSI), bulk density (BD), radial expansion ratio (RER) and overall acceptability (OAA) using single screw extruder. The study was carried out by central composite rotatable design (CCRD) using Response surface methodology (RSM) and moisture content of feed was kept as constant 16.0 ± 0.5 % throughout experiments. Mathematical models for various responses were found to fit significantly (P Extruded snack prepared with rice flour (80 %) and kidney bean flour (20 %) at optimized conditions was accepted by the taste panellists and above 20 % KB incorporation was found to decrease overall acceptability score.

  12. Puffing of okara/rice blends using a rice cake machine.

    Science.gov (United States)

    Xie, M; Huff, H; Hsieh, F; Mustapha, A

    2008-10-01

    Okara is the insoluble byproduct of soymilk and tofu manufactures. It is cheap, high in nutrients, and possesses great potential to be applied to functional human foods. In this study, a puffed okara/rice cake product was developed with blends of okara pellets and parboiled rice. Consumer preference and acceptance tests were conducted for the product. Okara pellets were prepared by grinding the strands obtained from extruding a mixture of dried okara and rice flour (3:2, w/w) with a twin-screw extruder. Okara pellets and parboiled rice were blended in 4 ratios, 90:10, 70:30, 40:60, and 0:100 (w/w), and tempered to 14% and 17% moisture. The blends were puffed at 221, 232, and 243 degrees C for 4, 5, or 6 s. The okara/rice cakes were evaluated for specific volume (SPV), texture, color, and percent weight loss after tumbling. Overall, the decrease in okara content and increase in moisture, heating temperature and time led to greater specific volume (SPV) and hardness, lighter color, and lower percent weight loss after tumbling. The consumer tests indicated that the okara/rice cake containing 70% okara pellets was preferred and the 90% one was liked the least. The possible drivers of liking for the puffed okara/rice cakes could be the okara content, hardness, SPV, bright color, and percent weight loss after tumbling.

  13. Development and analysis of composite flour bread.

    Science.gov (United States)

    Menon, Lakshmi; Majumdar, Swarnali Dutta; Ravi, Usha

    2015-07-01

    The study elucidates the effect of utilizing cereal-pulse-fruit seed composite flour in the development and quality analysis of leavened bread. The composite flour was prepared using refined wheat flour (WF), high protein soy flour (SF), sprouted mung bean flour (MF) and mango kernel flour (MKF). Three variations were formulated such as V-I (WF: SF: MF: MKF = 85:5:5:5), V-II (WF: SF: MF: MKF = 70:10:10:10), and V-III (WF: SF: MF: MKF = 60:14:13:13). Pertinent functional, physico-chemical and organoleptic attributes were studied in composite flour variations and their bread preparations. Physical characteristics of the bread variations revealed a percentage decrease in loaf height (14 %) and volume (25 %) and 20 % increase in loaf weight with increased substitution of composite flour. The sensory evaluation of experimental breads on a nine-point hedonic scale revealed that V-I score was 5 % higher than the standard bread. Hence, the present study highlighted the nutrient enrichment of bread on incorporation of a potential waste material mango kernel, soy and sprouted legume. Relevant statistical tests were done to analyze the significance of means for all tested parameters.

  14. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    The intent of this article is to demonstrate how wood waste called sawdust or wood flour can be transformed by plastic moulding machine into items of economic value. Wood flour is wood reduced to very fine particle form. It can be waste product from saw mills, wood working plants or produced from selected dry wood by ...

  15. WHIPPED FLOUR CONFECTIONERY BASED UPON WHOLE GRAIN GROUND FLOUR

    Directory of Open Access Journals (Sweden)

    G. O. Magomedov

    2014-01-01

    Full Text Available Summary. Flour confectionery products for the Russian market are the traditional products and their sales occupy the 1st place among all types of confectionery. Therefore, it is especially important to conduct research aimed at developing biscuits with increased food and biological value, meeting the existing in the human body requirements in nutrients. The use of flour from whole grain rye, wheat and amaranth allows to receive a quality product with a fine pore structure, pleasant taste and aroma and of high nutritional value. Using a mechanical method for dough loosening reduces operating costs, significantly intensifies the whole technological process, greatly reduces production area of enterprise, the duration of the entire technological process of biscuit production is reduced by 40%. In the developed biscuits protein content increases in 1,5 times; fiber in 6 times, potassium in 10.8 times, calcium in 11 times, phosphorus in 3 times, iron in 3.3 times, vitamin the B6 in4.1 times; B12 in 2.4 times, B9 in 12.4 times.

  16. PROFIL GELATINISASI BEBERAPA FORMULASI TEPUNG-TEPUNGAN UNTUK PENDUGAAN SIFAT PEMASAKAN (GELATINISATION PROFILE OF SEVERAL FLOUR FORMULATIONS FOR ESTIMATING COOKING BEHAVIOUR

    Directory of Open Access Journals (Sweden)

    Nelis Imanningsih

    2012-06-01

    Full Text Available ABSTRACT The combination of starch from various sources, salt and protein, are the basic formulation often found in the Indonesian traditional food. The different composition of amylopectine-amylose and the interactions among the ingredients in the formulation, determines pasting properties in order gain a suitable texture characteristics. The aim of the research is to study the interactions of severals kinds of flours with water, white egg protein, and salt and its influences to the cooking behaviour of semi-solid food. There are four formulations for each kind of flour (rice, glutenniuos rice, wheat and cassava that are: (1 water: flour = 25 : 3 g; (2 water :  flour : salt  =  25 : 3 : 0.28 g; (3 water : flour : albumen = 25 : 3 : 0.3 g; and (4 water : flour : salt : albumen = 25 : 3 : 0.28 : 0.3 g. The flours are analysed for proximate, particle size distribution and amylose-amylopectine composition. Pasting behaviour is measured using Rapid Visco Analizer (RVA to determine peak viscosity, peak temperature, and peak time gelatinisation. Rice, glutinous rice, wheat and cassava flours have different gelatinization profiles that depend on starches structural origin and amylose and amylopectin composition. Wheat flour has the lowest peak viscosity among four type of flour examined, whether cassava flour has the highest. Salt in starch-water system delays peak time. Egg white protein raises peak viscosity of starches, the addition of salt and egg white protein simultaneously into the system increases peak viscosity and causes the peak occurs earlier. In food processing, tapioca flour can be used to give viscosity at short time cooking but it could not give a sufficient viscosity to the cold products. Rice flour needs a long time cooking to give a suitable viscosity to the products, however this viscosity can hold well in cold temperature. Keywords: flour, salt, protein, gelatinisation, viscosity   ABSTRAK Kombinasi berbagai macam tepung dengan

  17. Studies on the properties of rice-husk-filled-PP composites: effect of maleated PP

    Directory of Open Access Journals (Sweden)

    Simone Maria Leal Rosa

    2009-09-01

    Full Text Available Rice husk is a by-product of rice milling process that usually finds inadequate final disposal (burning, land filling. Thermoplastics composites filled with rice husk flour are materials that offer an alternative for using this agricultural resource viewing the production of low dense materials with some specific properties. In this work composites of polypropylene (PP and rice husk flour (RHF were prepared by melt extrusion. Maleic anhydride-modified PP (MAPP was added as a coupling agent. It was verified that tensile strength decreased with filler loading. The presence of MAPP improved this property showing a strong dependence on the MAPP/RHF ratio (MAPP/RHF = 0.03 produced the best results. The density of the composites slightly increased with filler and coupling agent in comparison to pure PP. The presence of MAPP diminished more than 20% water uptake in highly-loaded composites.

  18. Optimisation of wheat-sprouted soybean flour bread using response ...

    African Journals Online (AJOL)

    The effect of sprouted soybean flour on wheat bread was studied. Sprouting significantly increased the vitamin C content of soybean flour from 2.0 mg kg-1 to 3.25 mg kg-1. The sprouted soybean flour resulted in increased loaf volume, a firmer, spongy and more elastic loaf. However, increasing the sprouted soybean flour ...

  19. Effects of Defatted Jack Bean Flour and Jack Bean Protein ...

    African Journals Online (AJOL)

    This study evaluated the effects of substituting wheat flour with defatted Jack bean flour and Jack bean protein concentrate on bread quality. Jack bean flour milled from the seed nibs was defatted with n-hexane and part of the defatted flour (DJF) extracted in acid medium (pH; 4.5) for protein concentrate (JPC). Both the DJF ...

  20. Composite Flours for Baked Products and Possible Challenges – A ...

    African Journals Online (AJOL)

    It contains some suggestions on how to reduce the high import bills of wheat by using composite flours or blends of wheatless flours in place of wheat flour for making leavened and unleavened products. Some studies on the quality characteristics of leavened and unleavened products made from composite flours or blends ...

  1. Application to Food of Lentinus edodes Flour with Extrusion Cooking

    OpenAIRE

    岡村, 徳光; 上杉, 誓子; 星野, 由紀子; 奥田, 展子; 大杉, 匡弘; Tokumitsu, Okamura; Seiko, Uesugi; Yukiko, Hoshino; Nobuko, Okuda; Masahiro, Ohsugi

    1997-01-01

    We report the application to food using Lentinus edodes (Shiitake) flour, which is a good vegetable for health, rich in protein, fiber and vitamins (B_1, B_2, niacin). The wheat flour contained Lentinus edodes flour was expansed and textured by a twin screw extruder. The snack contained 1% Lentinus edodes flour was most prefered in the points of taste, flavor, color and appearance.

  2. Correlation of pasting behaviors with total phenolic compounds and starch digestibility of indigenous pigmented rice grown in upper Northern Thailand

    Directory of Open Access Journals (Sweden)

    Jirapa Ponjanta

    2016-03-01

    Full Text Available Background: Thailand has one of the most important rice genetic resources with white, light brown, brown, red, and purple rice bran colors. The latter believed to have potential for health benefits due to their phenolic content. Recently researchers have indicated that starch digestive enzymes, including salivary and pancreatic α-amylases and α-glucosidases, can be inhibited by phenolic compounds. Although pasting properties of rice flour are key determinants of quality significantly impacting the final product texture, there is no in-depth study on their correlation with phenolic compound and starch digestibility. Methods: Rice flour from twelve varieties, three from each of five bran colors (white, brown, red, and purple, were evaluated for pasting properties (RVA-3D, total phenolic compounds, amylose content, resistant starch and estimated glycemic index. Simple correlation coefficients were calculated for the relationships between pasting properties (final viscosity, breakdown, setback and pasting temperature and total phenolic compounds, resistant starch and estimated glycemic index. Results: Within each rice variety, red and purple pigmented flours had higher total phenolic compounds (TPC and more resistant starch than that of white flours. The TPC and resistant starch content of the flours ranged between 7.83- 47.3 mg/L and 2.44–10.50% respectively, and producing 60-80 of estimated glycemic index. Viscosity behavior showed that pigmented with low amylose rice had lower viscosity temperature than that of pigmented with high amylose rice flour, but higher in peak viscosity. Correlation coefficients of pasting temperature, final viscosity, break down and setback with TCP was observed to be inversely related to glycemic index. However, it was positively correlated to the resistant starch and amylose content. Conclusions: Pigmented rice flour is a better source of TPC and resistant starch which in turn provides low glycemic index. This

  3. Highly phosphorylated functionalized rice starch produced by transgenic rice expressing the potato GWD1 gene

    DEFF Research Database (Denmark)

    Chen, Yaling; Sun, Xiao-Feng; Zhou, Xin

    2017-01-01

    Starch phosphorylation occurs naturally during starch metabolism in the plant and is catalysed by glucan water dikinases (GWD1) and phosphoglucan water dikinase/glucan water dikinase 3 (PWD/GWD3). We generated six stable individual transgenic lines by over-expressing the potato GWD1 in rice....... Transgenic rice grain starch had 9-fold higher 6-phospho (6-P) monoesters and double amounts of 3-phospho (3-P) monoesters, respectively, compared to control grain. The shape and topography of the transgenic starch granules were moderately altered including surface pores and less well defined edges...... content was positively correlated with short chains of DP6-12. The starch pasting temperature, peak viscosity and the breakdown were lower but the setback was higher for transgenic rice flour. The 6-P content was negatively correlated with texture adhesiveness but positively correlated...

  4. Highly phosphorylated functionalized rice starch produced by transgenic rice expressing the potato GWD1 gene

    DEFF Research Database (Denmark)

    Chen, Yaling; Sun, Xiao; Zhou, Xin Mao

    2017-01-01

    Starch phosphorylation occurs naturally during starch metabolism in the plant and is catalysed by glucan water dikinases (GWD1) and phosphoglucan water dikinase/glucan water dikinase 3 (PWD/GWD3). We generated six stable individual transgenic lines by over-expressing the potato GWD1 in rice....... Transgenic rice grain starch had 9-fold higher 6-phospho (6-P) monoesters and double amounts of 3-phospho (3-P) monoesters, respectively, compared to control grain. The shape and topography of the transgenic starch granules were moderately altered including surface pores and less well defined edges....... The gelatinization temperatures of both rice flour and extracted starch were significantly lower than those of the control and hence negatively correlated with the starch phosphate content. The 6-P content was positively correlated with amylose content and relatively long amylopectin chains with DP25-36, and the 3-P...

  5. Combination of near infrared spectroscopy and chemometrics for authentication of taro flour from wheat and sago flour

    International Nuclear Information System (INIS)

    Rachmawati; Rohaeti, E; Rafi, M

    2017-01-01

    Taro flour on the market is usually sold at higher price than wheat and sago flour. This situation could be a cause for adulteration of taro flour from wheat and sago flour. For this reason, we will need an identification and authentication. Combination of near infrared (NIR) spectrum with multivariate analysis was used in this study to identify and authenticate taro flour from wheat and sago flour. The authentication model of taro flour was developed by using a mixture of 5%, 25%, and 50% of adulterated taro flour from wheat and sago flour. Before subjected to multivariate analysis, an initial preprocessing signal was used namely normalization and standard normal variate to the NIR spectrum. We used principal component analysis followed by discriminant analysis to make an identification and authentication model of taro flour. From the result obtained, about 90.48% of the taro flour mixed with wheat flour and 85% of taro flour mixed with sago flour were successfully classified into their groups. So the combination of NIR spectrum with chemometrics could be used for identification and authentication of taro flour from wheat and sago flour. (paper)

  6. Combination of near infrared spectroscopy and chemometrics for authentication of taro flour from wheat and sago flour

    Science.gov (United States)

    Rachmawati; Rohaeti, E.; Rafi, M.

    2017-05-01

    Taro flour on the market is usually sold at higher price than wheat and sago flour. This situation could be a cause for adulteration of taro flour from wheat and sago flour. For this reason, we will need an identification and authentication. Combination of near infrared (NIR) spectrum with multivariate analysis was used in this study to identify and authenticate taro flour from wheat and sago flour. The authentication model of taro flour was developed by using a mixture of 5%, 25%, and 50% of adulterated taro flour from wheat and sago flour. Before subjected to multivariate analysis, an initial preprocessing signal was used namely normalization and standard normal variate to the NIR spectrum. We used principal component analysis followed by discriminant analysis to make an identification and authentication model of taro flour. From the result obtained, about 90.48% of the taro flour mixed with wheat flour and 85% of taro flour mixed with sago flour were successfully classified into their groups. So the combination of NIR spectrum with chemometrics could be used for identification and authentication of taro flour from wheat and sago flour.

  7. A preliminary study on identification of Thai rice samples by INAA and statistical analysis

    Science.gov (United States)

    Kongsri, S.; Kukusamude, C.

    2017-09-01

    This study aims to investigate the elemental compositions in 93 Thai rice samples using instrumental neutron activation analysis (INAA) and to identify rice according to their types and rice cultivars using statistical analysis. As, Mg, Cl, Al, Br, Mn, K, Rb and Zn in Thai jasmine rice and Sung Yod rice samples were successfully determined by INAA. The accuracy and precision of the INAA method were verified by SRM 1568a Rice Flour. All elements were found to be in a good agreement with the certified values. The precisions in term of %RSD were lower than 7%. The LODs were obtained in range of 0.01 to 29 mg kg-1. The concentration of 9 elements distributed in Thai rice samples was evaluated and used as chemical indicators to identify the type of rice samples. The result found that Mg, Cl, As, Br, Mn, K, Rb, and Zn concentrations in Thai jasmine rice samples are significantly different but there was no evidence that Al is significantly different from concentration in Sung Yod rice samples at 95% confidence interval. Our results may provide preliminary information for discrimination of rice samples and may be useful database of Thai rice.

  8. QUALITY OF GLUTEN-FREE BUCKWHEAT-RICE BREAD

    Directory of Open Access Journals (Sweden)

    Petra Dvořáková

    2013-02-01

    Full Text Available In case of celiac disease the products containing gluten must be excluded from the nutrition. The offer of gluten-free products (especially pastry is low and in addition the gluten-free breads are typical of dry crust and crumb and higher firmness in comparison with wheat bread. This work deals with gluten-free mixtures prepared from buckwheat and rice flour and the effect of rising amount of these flours on bread quality, crumb hardness, elasticity, chewiness and gumminess. With rising portion of buckwheat flour in the mixture the bread volume, dough and bread yield increased. The biggest improvement was found for mean bread volume (30% between the samples FO 1090 (166.7 cm3 and FO 9010 (216.7 cm3. The texture analysis showed positive effect of rice flour on hardness, chewiness and gumminess. Hardness decreased from 114.5 N (F 100 to 91.3 N (FO 1090. Very similar results showed chewiness and gumminess. Chewiness of F 100 (314.0 was reduced by 32.5% to 212.2 at the sample FO 1090. Gumminess was improved almost linearly through the samples, the biggest difference (44.3% was found between the check sample F 100 (88.3 and FO 1090 (49.7.

  9. Assessment of the quality of bran and bran oil produced from some Egyptian rice varieties.

    Science.gov (United States)

    Salem, Eglal G; El Hissewy, Ahmed; Agamy, Neveen F; Abd El Barry, Doaa

    2014-04-01

    Rice (Oryza sativa L.) is one of the leading food crops of the world, the staple food of over half the world's population. The bran, which is an important byproduct obtained during rice milling, constitutes about 1/10 of the weight of the rice grain. Rice bran is the outer brown layer including the rice germ that is removed during the milling process of brown grain. This milling byproduct is reported to be high in natural vitamins and minerals, particularly vitamin E. The present study was conducted to determine the chemical composition of bran and bran oil of 13 different rice varieties commonly produced in Egypt, to study the utilization of rice bran in bread production, and to assess the quality and acceptance of the rice bran edible oil produced. Rice bran was produced from 13 Egyptian varieties of recently harvested rice as well as from paddy rice stored for 1 year. The extracted bran was immediately stabilized then subjected to chemical analysis (such as moisture content, protein, fat, carbohydrates, fiber, and ash) as well as trace and heavy metals determination (P, K, Na, Ca, Fe, Zn, Cu, and Mg). Bread was produced by adding Giza172 rice bran at three different concentrations to wheat flour then subjected to chemical analysis, caloric content, and organoleptic examination. Bran oil was extracted from the different varieties of rice bran (recently harvested and stored) then subjected to chemical and organoleptic examinations as well as vitamin E and oryzanol determination. The percentage of rice bran of newly harvested Egyptian rice was 11.68% and was 10.97% in stored rice. The analysis showed mean values of 5.91 and 5.53% for moisture, 14.60 and 14.40% for crude protein, 14.83 and 15.20% for fat, 44.77 and 45.40% for carbohydrates, 6.55 and 7.06% for crude fiber, and 8.87 and 8.50% for ash for newly harvested and stored rice bran, respectively. Bread containing 15% rice bran showed the highest score percentages for organoleptic quality compared with the

  10. Effect of Iron Fortified Wheat Flour on the Biology and Physiology of Red Flour Beetle, (Herbst

    Directory of Open Access Journals (Sweden)

    Sohail Ahmed

    2010-01-01

    Full Text Available Iron overload in the fortified flour can influence the life stages and physiology of the insects. The present study was carried out to evaluate the effect of commercially available premix iron fortified flour as well as effect of different concentrations of post-mix iron fortified flour (30–5 ppm on biology of red flour beetle, Tribolium castaneum (Hebrst.. Larval and pupal duration, total developmental time, fecundity and larval weights in two consecutive generations of beetle were compared with control treatment. Amylase and protease activities of gut of the beetle were also measured in premix and postmix flours. Results showed that larval mortality increased in two sources of premix iron flour when compared with control. Larval weight was reduced in first generation only. The larval mortality was significantly higher in 30 ppm postmix iron fortified flour than in other postmix concentrations and control treatment. The larvae of T. castaneum fed on two sources of premix and in various concentrations of postmix iron fortified flour revealed an increase in amylases and decrease in protease activities.

  11. Bread making properties of wheat flour supplemented with thermally processed hypoallergenic lupine flour

    Energy Technology Data Exchange (ETDEWEB)

    Guillamon, E.; Cuadrado, C.; Pedrosa, M. M.; Varela, A.; Cabellos, B.

    2010-07-01

    In recent years there has been increased interest in using lupine for human nutrition due to its nutritional properties and health benefits. Moreover, lupine is used as an ingredient in bread making because of its functional and technological properties. However, a higher number of allergic reactions to this legume have recently been reported as a consequence of a more widespread consumption of lupine-based foods. In a previous study, several thermal treatments were applied to lupine seeds and flours resulting in reduced allergenicity. In order to study how this thermal processing (autoclaving and boiling) affects the bread making properties, raw and thermally processed lupine flours were used to replace 10% of wheat flour. The effect of supplementing wheat flour with lupine flour on physical dough properties, bread structure and sensory characteristics were analysed. The results indicated that thermally-treated lupine flours, had similar bread making and sensorial properties as untreated lupine flour. These thermal treatments could increase the potential use of lupine flour as a food ingredient while reducing the risk to provoke allergic reactions. (Author) 36 refs.

  12. FORMULASI TEPUNG PENYALUT BERBASIS TEPUNG JAGUNG DAN PENENTUAN UMUR SIMPANNYA DENGAN PENDEKATAN KADAR AIR KRITIS [Formulation of Corn Flour-Based Batter and Prediction of Its Shelf Life using Critical Moisture Approach

    Directory of Open Access Journals (Sweden)

    Sugiyono1*

    2010-12-01

    Full Text Available The objectives of this study were to obtain the best formula for corn flour-based batter and to predict its shelf life using critical moisture approach. According to a hedonic test, the best batter formula was composed of 60% corn flour, 12.5% rice flour, 12.5% tapioca starch, and 15% glutinous rice flour. Addition of glutinous rice flour in the formula changed the proportion of amylose and amylopectin in the batter. As a result, the retrogradation of the batter decreased and the texture of its fried product was preferred. A critical moisture approach was used to predict the shelf life of the batter. The critical moisture content of the batter was 0.16 g H2O/g solid.The isotherm sorption phenomenon of the batter was best described using Hasley model. The shelf life of the product was 7 months when packaged in polypropylene (0,07 g/m2day.mmHg at 85% RH.

  13. Flour sodium dodecyl sulfate (SDS)-extractable protein level as a cookie flour quality indicator.

    Science.gov (United States)

    Pareyt, Bram; Bruneel, Charlotte; Brijs, Kristof; Goesaert, Hans; Delcour, Jan A

    2010-01-13

    Flour characteristics of laboratory-milled flour fractions of two wheat cultivars were related to their cookie-baking performance. Cultivar (cv.) Albatros wheat milling yielded fractions with lower damaged starch (DS) and arabinoxylan levels and higher sodium dodecyl sulfate-extractable protein (SDSEP) levels than did cv. Meunier wheat milling. During baking, cv. Albatros flour doughs spread faster and set later than their cv. Meunier counterparts and, hence, resulted in larger cookie diameters. DS levels negatively affected spread rate during both cv. Albatros (R2=0.68) and cv. Meunier (R2=0.51) cookie baking. SDSEP levels also influenced cookie quality. The use of flour heat-treated to reduce its SDSEP levels to different degrees led to reduction of the set time (R2=0.90). It was deduced that larger gluten polymer sizes limit dough spread time during baking and that, apart from DS level, the SDSEP level is an indicator for cookie flour quality.

  14. Utilization of Durian Seed Flour as Filler Ingredient of Meatball

    Directory of Open Access Journals (Sweden)

    D. R. Malini

    2016-12-01

    Full Text Available Durian seed flour contains starch consisted of amylose and amylopectin like tapioca flour, so it can be utilized as a filler in meatball production. The purposes of this research were to evaluate the nutrient content and quality of durian seed flour, the best level of durian seed flour addition to the meatball production, and the quality of beef meatball during storage in room temperature and refrigerator. Complete randomized design (CRD was used with 3 treatments and 3 replications. The treatments used different filler ingredients consisted of: 1 100% tapioca, 2 50% tapioca + 50% durian seed flour, and 3 100% durian seed flour utilization. The results showed that durian seed flour could affect the protein levels and hardness of beef meatballs. In the organoleptic test, the addition of durian seed flour had no effect on the appearance of the color, flavor, aroma, and texture. The meatballs with 100% durian seed flour had the lowest hardness. The protein content of the meatballs with 100% durian seed flour was the highest. The used of 50% durian seed flour gave the best effect to beef meatball during storage. Meatball could be stored up to 8 h in room temperature while refrigerator could keep it longer up to 12 d. It was concluded that the addition 50% durian seed flour may substitute tapioca flour as filler ingredient of beef meatball.

  15. (PGMS) rice

    African Journals Online (AJOL)

    user

    2011-04-18

    Apr 18, 2011 ... tics, led us to predict that pollen cell abortion in this type of rice when ... averages of natural day-light-lengths and temperatures were used. A natural long ... blocks were allowed to grow under natural growth conditions (which.

  16. Evaluation of the effects of ionizing radiations on flour: Review article

    International Nuclear Information System (INIS)

    Sá, Ana Paula Nunes de; Villavicencio, Anna Lucia Casanas Haasis

    2017-01-01

    The radiation is an efficient alternative, of great technological value in employment of 10 kGy doses up to dry, dehydrated foods and low in fat. The objective of this research is accomplishing through bibliographical survey on existing work with purpose flours and technology available in the literature for medium and high doses of radiation. The study was based on data from Brazilian and international bases, such as: Google Scholar, Science Direct, Pubmed, SciELO, Web of Science. Results were collected from the period since 1980, in flour from maize, cassava, wheat, beans, rice, nuts, cornmeal and banana. Fpreach used keywords in both Portuguese and English: food irradiation; irradiated meal and technological aspects of irradiated meal; food, irradiation technology aspects of irradiated flour. Search results/search showed that doses vary from plant application to higher doses related to technological features. 10 works were found about phytosanitary purposes (0.1 to 1.0 kGy) and 20 with the technological features (doses up to 1 kGy to 10 kGy). In this work related studies have been observed with microbiological load reduction, nutritional composition, organoleptic changes and increased ratio of acid value present in cornmeal/Brown and also a tendency of improvement as a means of improving the production of baking in some articles. In this way, based on the literature, we concluded that food irradiation technologies with medium doses present advantages and improve the features in production of breads. (author)

  17. [Effect of extrusion on protein and starch bioavailability in corn and lima bean flour blends].

    Science.gov (United States)

    Pérez-Navarrete, Cecilia; Betancur-Ancona, David; Casotto, Meris; Carmona, Andrés; Tovar, Juscelino

    2007-09-01

    Extrusion is used to produce crunchy expanded foods, such as snacks. The nutritional impact of this process has not been studied sufficiently. In this study, in vitro and in vivo protein and starch bioavailability was evaluated in both raw and extruded corn (Zea mays)(C) and lima bean (Phaseolus lunatus)(B) flour blends, prepared in 75C/25B and 50C/ 50B (p/p) proportions. These were processed with a Brabender extruder at 160 degrees C, 100 rpm and 15.5% moisture content. Proximate composition showed that in the extruded products protein and ash contents increased whereas the fat level decreased. In vitro protein digestibility was higher in the extrudates (82%) than in the raw flours (77%). Potentially available starch and resistant starch contents decreased with extrusion. The in vitro assays indicated that extrusion improved protein and starch availability in the studied blends. In vivo bioavailability was evaluated using the rice weevil (Sithophilus oryzae) as a biological model. The most descriptive biomarkers of the changes suggested by the in vivo tests were body protein content (increased by extrusion) and intestinal a-amylase activity (decreased by processing). Overall, results suggest that extrusion notably increases the nutritional quality of corn and lima bean flour blends.

  18. Studies on Production of Arabic Bread From Irradiated and Stored Potato Flour as Partial Substitute of Wheat Flour

    International Nuclear Information System (INIS)

    Al-Kuraieef, A.N.

    2012-01-01

    The present study was carried out to evaluate Arabic bread produced from potato flour and wheat flour. Potato flour was prepared from Diamont cultivar of potato tubers after irradiation with 50 and 150 Gy. The ratios of potato flour were 5, 10 and 15% and the flour was stored for six months and taken for analysis every three months. Amino acids, protein, carbohydrate, baking and staling tests were applied to study the effect of adding potato flour extracts from tubers of non-irradiated and irradiated potato to wheat flour in Arabic bread making. Amino acids in potato and wheat were studied. The flour of wheat was found to be poor in lysine while potato flour contained about twice of these amino acids. Protein content was decreased with increasing the ratios of potato flour. The addition of potato flour to the Arabic bread increased the percentage of essential amino acids. Moreover, the addition of potato flour during storage periods had an improving effect on the quality of Arabic bread. Water retention capacity (the staling rate) was increased progressively with increasing the percentage as potato flour in the bread which was effective in keeping bread fresh and organoleptic properties

  19. Use of radiation disinfestation in the control of rice insect pests during storage

    International Nuclear Information System (INIS)

    El-Kady, E.A.

    1981-01-01

    Rice weevil (Sitophilus oryzae), red flour beetle (Tribolium castaeneum), saw-toothed grain beetle (Oryzaephilus surinamensis), and flour moth (Ephestia kuehniella) are commonly found in Egyptian stored rice. The aim of this project is to carry out a study of a pilot-scale radiation disinfestation of these rice insect pests in an amount large enough to extrapolate data for later commercial practice. Fumigation treatments with phostoxin, methyl bromide and a combination treatment (methyl bromide + 7.5 krad) were also performed as a comparison to reveal the most effective way to control these rice pests. The most effective of all treatments tested was the 50-krad treatment. Complete sterility for the adults of these pests was obtained after treating rice directly, while complete mortality was reached within 30-60 days. Regarding fumigation treatments - phostoxin, methylbromide and combined treatment (methylbromide + 7.5 krad), the living stages of the four insect pests in rice varied during the storage period. However, the combination treatment gave the best results. Adults of the three Coleopteran species appeared in rice after four months because the 7.5-krad dose was not enough to kill the eggs which might have been laid by young females before being killed by fumigants. (author)

  20. Elucidating potential utilization of Portuguese common bean varieties in rice based processed foods.

    Science.gov (United States)

    Carbas, Bruna; Pathania, Shivani; Castanho, Ana; Lourenço, Diana; Veiga, Isabel Mota; Patto, Maria Carlota Vaz; Brites, Carla

    2018-03-01

    The present study was aimed at studying the physico-chemical and functional properties of 31 Portuguese common bean varieties. In addition, the whole bean flours (WBF) and starch isolates (SI) of three representative bean varieties and their rice: bean blends (70:30; 50:50) were assessed for amylose content, thermal and pasting properties in view of supplementation in rice based processed foods. Bean varieties showed significant differences in protein content (20.78-27.10%), fat content (1.16-2.18%), hydration capacity (95.90-149.30%), unhydrated seeds (4.00-40.00%), γ tocopherol (3.20-98.05 mg/100 g fat), δ tocopherol (0.06-4.72 mg/100 g fat) and pasting behavior. Amylose content of WBF (11.4-20.2%) was significantly lower than rice flour (23.51%) whereas SI of beans (40.00-47.26%) had significantly higher amylose content than SI of rice (28.13%). DSC results showed that WBF (11.4-20.2 °C) had significantly broader and lower gelatinization temperature range (∆Tr) than corresponding SI (20.9-23.1 °C). WBF had significantly lower pasting viscosity due to low starch content and compositional matrix effect as compared to SI. Setback viscosities of WBF and rice: bean blends was lower than rice flour. Low setback viscosities of rice:bean blends may be used to prevent syneresis and stabilizing the quality of frozen foods in rice based processed foods.

  1. Utilization of Durian Seed Flour as Filler Ingredient of Meatball

    OpenAIRE

    D. R. Malini; I. I. Arief; H. Nuraini

    2016-01-01

    Durian seed flour contains starch consisted of amylose and amylopectin like tapioca flour, so it can be utilized as a filler in meatball production. The purposes of this research were to evaluate the nutrient content and quality of durian seed flour, the best level of durian seed flour addition to the meatball production, and the quality of beef meatball during storage in room temperature and refrigerator. Complete randomized design (CRD) was used with 3 treatments and 3 replications. The tre...

  2. Development of Wet Noodles Based on Cassava Flour

    OpenAIRE

    Akhmad Z. Abidin; Cinantya Devi; Adeline

    2013-01-01

    Cassava is one of Indonesia's original commodities and contains good nutrition and has high productivity and a relatively low price. Cassava flour has a high potential as a substitute for imported wheat flour that is widely used in noodle production. The main purpose of this research was to develop wet noodles from cassava flour that can compete with wet noodles from wheat flour. The research consisted of experiments with several variations of composition and production method for producing c...

  3. Glycaemic indices of different varieties of rice grown in Sri Lanka.

    Science.gov (United States)

    Hettiarachchi, P; Jiffry, M T; Jansz, E R; Wickramasinghe, A R; Fernando, D J

    2001-03-01

    Varieties of red raw rice are widely believed to have a better nutritional quality. The physiological effects of consuming different varieties of rice may not be so. The glycaemic index has been developed as an indicator of the physiological effect of foods. It is the glycaemic response of a 50 g carbohydrate portion of food expressed as a percentage of that of a standard. The objective of this study was to determine the glycaemic indices of different varieties of rice grown in Sri Lanka. Digestible carbohydrate content of 11 varieties of rice flour and bread were determined. Fasting blood samples followed by half-hourly samples for two hours were drawn after giving portions of either cooked rice or bread containing 50 g carbohydrate each. Fibre mill in Gampaha district. Twenty-two fibre mill workers aged between 25 and 50 years. The area under the blood glucose curve (AUC) for varieties of rice for a subject was calculated. Average AUC of 3 values for bread were calculated. Glycaemic index of each variety of rice was determined from the above variables. Glycaemic indices of varieties of rice differ. The glycaemic indices of varieties of red raw rice varied between 56 and 73 and the variety Bg 350 had the lowest glycaemic index. There was no significant difference between mean glycaemic index of varieties of white raw and some varieties of red raw rice (p = 0.2). Parboiled varieties of red raw rice had a significantly lower glycaemic index than white raw rice (p = 0.04) and some of the red raw rice (p = 0.005). The glycaemic index cannot be predicted from the colour of the rice grain. Red parboiled varieties of rice and Bg 350 can be recommended for patients with diabetes.

  4. Effect of quinoa and potato flours on the thermomechanical and breadmaking properties ofwheat flour

    Directory of Open Access Journals (Sweden)

    E. Rodriguez-Sandoval

    2012-09-01

    Full Text Available The thermomechanical properties of dough and the physical characteristics of bread from quinoa-wheat and potato-wheat composite flours at 10 and 20% substitution level were evaluated. The functional properties of flours were measured by the water absorption index (WAI, water solubility index (WSI and swelling power (SP. The thermomechanical properties of wheat and composite flours were assessed using a Mixolab and the baking quality characteristics of breads were weight, height, width, and specific volume. The results showed that the higher values of WAI (4.48, WSI (7.45%, and SP (4.84 were for potato flour. The quinoa-wheat composite flour presented lower setback and cooking stability data, which are a good indicator of shelf life of bread. On the other hand, the potato-wheat composite flour showed lower stability, minimum torque and peak torque, and higher water absorption. Weight, height, width, and specific volume of wheat bread were most similar to samples of potato-wheat composite flour at 10% substitution level.

  5. Tempeh flour as a substitute for soybean flour in coconut cookies

    Directory of Open Access Journals (Sweden)

    Rodrigo Santos Leite

    2013-12-01

    Full Text Available The objective of this study was to prepare roasted and lyophilized tempeh flour with soybean cultivar BRS 267 to apply them in the formulation of coconut biscuits. The cookies produced with whole soy flour and mixed flour of soybean and tempeh were evaluated for proximate composition, fatty acid profile, and isoflavone aglycones in order to verify the effects of inoculation with the fungus Rhizopus oligosporus and those of the drying processes of roasting and lyophilization on the chemical characteristics of the final product. Sensory acceptance and purchase intention of the formulated products were also evaluated. The results indicate the maintenance of linolenic acid, which is important in the prevention of coronary diseases, and an increase in the aglycones levels when the tempeh flour was used. Lipids and proteins showed differences, and the sensory analyses demonstrated similarity between the cookies with satisfactory scores for aroma, flavor, texture, and overall acceptability for both samples. when compared to the control. Purchase intent was also positive for the lyophilized and toasted tempeh flours, thus enabling the use of the roasting process as a simple drying method, for processing tempeh and obtaining a flour rich in proteins and aglycones that can be used as a partial substitute for soy flour in cookies and other bakery products.

  6. Quality characteristics of wheat flour dough and bread containing grape pomace flour.

    Science.gov (United States)

    Šporin, Monika; Avbelj, Martina; Kovač, Boris; Možina, Sonja Smole

    2018-04-01

    Wheat bread was enriched with 6%, 10% and 15% dried and milled grape pomace flour from two grape cultivars: 'Merlot' and 'Zelen'. Rheological, textural, sensory and antioxidant properties of the enriched dough and bread were evaluated, and compared to control samples. Grape cultivar had significant impact on the rheological characteristics of the dough, and on the sensory and antioxidant properties of the final bread. Development time and dough stability were longer when 'Merlot' grape pomace flour was added compared to 'Zelen' grape pomace flour and the control. Grape pomace flour addition affected bread volume, firmness, crumb and crust colour, and odour and taste intensity. Moreover, grape pomace flour addition resulted in a stickier and less springy crumb texture, and some negative sensorial properties, such as increased intensity of aftertaste and sand feeling in the mouth. The phenolic content and antioxidant activity of bread were positively correlated with grape pomace flour addition ( r = 0.987, p = 0.01 and r = 0.941, p = 0.01 between phenolic content and ferric reducing antioxidant power and phenolic content and 2,2-diphenyl-1-picrylhydrazyl, respectively). The highest total phenolic contents were 5.92 mg gallic acid equivalents (GAE)/g dw for 'Merlot' and 3.65 mg gallic acid equivalents /g dw for 'Zelen', which were seen for the bread prepared with the highest grape pomace flour addition (15%). The highest antioxidant activity determined by the 2,2-diphenyl-1-picrylhydrazyl and ferric reducing antioxidant power assays were seen for the bread prepared with the highest 'Merlot' grape pomace flour addition (15%). Dough characteristic and sensory profile are strongly influenced by cultivar of grape pomace flour. Based on results of sensory profiling, the variety 'Zelen' is suggested for use.

  7. Laser-induced breakdown spectroscopy (LIBS) for rapid analysis of ash, potassium and magnesium in gluten free flours.

    Science.gov (United States)

    Markiewicz-Keszycka, Maria; Casado-Gavalda, Maria P; Cama-Moncunill, Xavier; Cama-Moncunill, Raquel; Dixit, Yash; Cullen, Patrick J; Sullivan, Carl

    2018-04-01

    Gluten free (GF) diets are prone to mineral deficiency, thus effective monitoring of the elemental composition of GF products is important to ensure a balanced micronutrient diet. The objective of this study was to test the potential of laser-induced breakdown spectroscopy (LIBS) analysis combined with chemometrics for at-line monitoring of ash, potassium and magnesium content of GF flours: tapioca, potato, maize, buckwheat, brown rice and a GF flour mixture. Concentrations of ash, potassium and magnesium were determined with reference methods and LIBS. PCA analysis was performed and presented the potential for discrimination of the six GF flours. For the quantification analysis PLSR models were developed; R 2 cal were 0.99 for magnesium and potassium and 0.97 for ash. The study revealed that LIBS combined with chemometrics is a convenient method to quantify concentrations of ash, potassium and magnesium and present the potential to classify different types of flours. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Optimisation of wheat-sprouted soybean flour bread using response ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-11-16

    Nov 16, 2009 ... which may be added include flours of other cereals, fat, malt flour, soya flour, ... but its protein is of lower nutritional quality than milk, soy, pea and lupin proteins as its ... improvers from local raw materials. It is thought that the.

  9. Effects on respiratory system due to exposure to wheat flour

    Directory of Open Access Journals (Sweden)

    Adel Mohammed Said

    2017-07-01

    Conclusions: Exposure to wheat flour increases the risk of developing respiratory symptoms; it also causes reduction in the pulmonary function parameters, as regards spirometry and DLCOSB. Exposure to wheat flour causes interstitial lung disease as detected by HRCT chest. Smoking augments the wheat flour induced lung disease.

  10. Effect of Cassava Flour Processing Methods and Substitution Level ...

    African Journals Online (AJOL)

    The consumption of bread is globally increasing. However, due to increased costs associated with production of bread from 100% wheat flour especially in developing countries, other cereal based flours are now being blended with wheat flour to produce bread. This study was carried out to assess the effect of using two ...

  11. Effect od Soybean/Cassava Flour Blend in the Proximate ...

    African Journals Online (AJOL)

    Cassava tubers were also peeled, chopped, dried and milled in a similar fashion. Eventually, the soybean and cassava flour samples were blended individually with the quality protein maize flour in three different proportions: 5:95, 10:90 and 15:85, respectively. Normal maize flour was used as a control for the quality ...

  12. Electron beam treatment parameters for control of stored product insects

    International Nuclear Information System (INIS)

    Cleghorn, D.A.; Nablo, S.V.; Ferro, D.N.; Hagstrum, D.W.

    2002-01-01

    The fluidized bed process (EBFB) has been evaluated for the disinfestation of cereal grains. The various life stages from egg to adult have been studied on the 225 kV pilot as a function of surface dose. Three of the most common pests were selected: the rice weevil (S. oryzae), the lesser grain borer (R. dominica) and the red flour beetle (T. castaneum). The major challenge to this process lies in those 'protected' life-stages active deeply within the endosperm of the grain kernel. The rice weevil is such an internal feeder in which the larvae develop through several molts during several weeks before pupation and adult emergence. Product velocities up to 2000 m/min have been used for infested hard winter wheat at dose levels up to 1000 Gy. Detailed depth of penetration studies at three life stages of S. oryzae larvae were conducted at 225-700 kV and demonstrated effective mortality at 400 kVx200 Gy. Mortality data are also presented for the radiation labile eggs of these insects as well as the (sterile) adults, which typically lived for several weeks before death. These results are compared with earlier 60 Co gamma-ray studies on these same insects. Based upon these studies, the effectiveness of the fluidized bed process employing self-shielded electron beam equipment for insect control in wheat/rice at sub-kilogray dose levels has been demonstrated

  13. Study of mechanical and thermal properties of soy flour elastomers

    Science.gov (United States)

    Allen, Kendra Alicia

    Bio-based plastics are becoming viable alternatives to petroleum-based plastics because they decrease dependence on petroleum derivatives and are more environmentally friendly. Raw materials such as soy flour are widely available, low cost, lightweight, stiffness and have high strength characteristics, but weak interfacial adhesion between the soy flour and the polymer poses a challenge. In this study, soy flour was utilized as a filler in thermoplastic elastomer composites. A surface modification called acetylation was investigated at soy flour concentrations of 10 wt%, 15 wt% and 20 wt%. The mechanical properties of the composites were then compared to that of elastomers without a filler. Chemical characterization of the acetylated soy flour was attempted in order to understand what occurs during the reaction and after completion. In the range of tests, soy flour loadings were observed to be inversely proportional to tensile strength for both the untreated and treated soy flour. However, the acetylated soy flour at 10 wt% concentration performed comparable to that of the neat rubber and resulted in an increase in tensile strength. Unexpectedly, the acetylation reaction increased elongation, which reduced stress within the composite and is believed to increase the adhesion of the soy flour to that of the elastomer. In the nuclear magnetic resonance (SS-NMR), the intensity for the treated soy flour was larger than that of the untreated soy flour for the acetyl groups that were attached to the soy flour, particularly, the carbonyl function group next to the deprotonated oxygen and the methyl group next to the carbonyl. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) indicated that the acetylated soy flour is slightly more thermally stable than the untreated soy flour. The treated soy flour also increased the decomposition temperature of the composite.

  14. Technological characteristics of bread containing integral irradiated flours

    International Nuclear Information System (INIS)

    Teixeira, Christian A.H.M.; Mastro, Nelida L. del

    2011-01-01

    Wheat is normally used to make bread, pasta, and noodles, because among the cereal flours, only wheat flour has the ability to form cohesive dough upon hydration. For that reason, only partial substitution of wheat flour can be recommended. In this work, pan breads were prepared with 30% content of irradiated whole wheat, whole rye and coarse cornmeal and the influence of blending on bread making capabilities investigated through some technological characteristics. All-brand wheat, rye and cornmeal flours were irradiated with 0, 1, 3 and 9 kGy in a 60 Co and the deformation force, height and weight of breads prepared with those blends were then determined. Breads prepared with irradiated whole wheat flour showed an increase in the deformation force with the increase of radiation dose. The bread height presented also an increase for the doses of 1 and 3 kGy. Breads prepared with refined wheat flour blended with irradiated whole rye flour showed an increased deformation force for radiation doses of 1 and 3 kGy and an increase in weight for samples irradiated with 1 kGy. Coarse cornmeal blended flour showed a great increase of the deformation force upon irradiation, and an increase in weight for samples irradiated with 3 kGy. The results indicate that the addition of irradiated integral flour, whole wheat, whole rye flour and cornmeal to wheat flour may confer changes in physical properties beside an increment in nutritional value. (author)

  15. Development of Wet Noodles Based on Cassava Flour

    Directory of Open Access Journals (Sweden)

    Akhmad Z. Abidin

    2013-04-01

    Full Text Available Cassava is one of Indonesia’s original commodities and contains good nutrition and has high productivity and a relatively low price. Cassava flour has a high potential as a substitute for imported wheat flour that is widely used in noodle production. The main purpose of this research was to develop wet noodles from cassava flour that can compete with wet noodles from wheat flour. The research consisted of experiments with several variations of composition and production method for producing cassava flour-based wet noodles. The best result was then examined for its nutritional value, economical value, and market response, and also a comparison was made between the prepared wet noodles and the standard noodles made from wheat flour. The analysis was based on five characteristics: taste, texture, chewiness, aroma, and appearance. Relations between these characteristics with composition, materials used, and methods applied are discussed. The developed cassava flour-based wet noodle meets physical, nutritional, and economical standards. Raw materials of the noodle were cassava flour and a wheat flour composite with a 5:1 ratio, egg, gluten, soda-ash, water, and vegetable oil, while the process was completed in multiple stages. Market response showed that the cassava flour-based wet noodles were 80% similar to wheat-flour noodles.

  16. Improvement of Tagliatelle Quality by Addition of Red Quinoa Flour

    Directory of Open Access Journals (Sweden)

    Anamaria Pop

    2014-11-01

    Full Text Available In order to diversification of tagliatelle pasta and increasing segment of consumers it was intended to improvement of tagliatelle pasta quality by addition of red quinoa flour. The products obtained at Bakery Pilot Station of University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca was the result of original recipe. To optimize the recipe were made four experimental variants, white flour and red quinoa flour is used in different proportions: Variant 1 – plain tagliatelle pasta (control sample who used white flour WF in 100%, Variant 2 consisting of 15% red quinoa flour (15 QF, Variant 3 consisting of 30 % red quinoa flour (30 QF and Variant 4 consisting of 50 % red quinoa flour (50 RQF. The experimental variants was analyzed for physico-chemical: moisture content, protein content and acidity. The sensory attributes, were evaluated by using a 9-point Hedonic scale. Present study indicated that the variant 3 were most accepted by consumers.

  17. CHEMICAL COMPOSITION AND FUNCTIONAL PROPERTIES OF RICE PROTEIN CONCENTRATES

    Directory of Open Access Journals (Sweden)

    V. V. Kolpakova

    2015-01-01

    Full Text Available Traditionally rice and products of its processing are used to cook porridge, pilaf, lettuce, confectionery, fish, dairy and meat products. At the same time new ways of its processing with releasing of protein products for more effective using, including the use of a glutenfree diet, are developing. The task of this study was a comparative research of nutrition and biological value and functional properties of protein and protein-calcium concentrates produced from rice flour milled from white and brown rice. The traditional and special methods were used. Concentrates were isolated with enzyme preparations of xylanase and amylolytic activity with the next dissolution of protein in diluted hydrochloric acid. Concentrates differed in the content of mineral substances (calcium, zinc, iron and other elements, amino acids and functional properties. The values of the functional properties and indicators of the nutritional value of concentrates from white rice show the advisability of their using in food products, including gluten-free products prepared on the basis of the emulsion and foam systems, and concentrates from brown rice in food products prepared on the basis of using of the emulsion systems. Protein concentrates of brown rice have a low foaming capacity and there is no foam stability at all.

  18. Fungi species and red flour beetle in stored wheat flour under Jazan region conditions.

    Science.gov (United States)

    Bosly, Hanan AbuAlQasem; Kawanna, Maha Adel

    2014-05-01

    Infection of stored wheat flour with insects and toxic fungi can be an extremely serious problem. This study was conducted to isolate and identify the fungal species and insects in different stages, which infested and contaminated the stored flour under Jazan region conditions and changed its color and flavor. The obtained results revealed that the isolated insect was the red flour beetle Tribolium castaneum. Live adult, larvae and cast skin were isolated. Four Aspergillus species were isolated from stored wheat flour; the isolated species prevalence being A. flavus > A. niveus > A. terreus > A. niger by rate 44.5%, 37.8%, 10.9% and 6.7%, respectively. The same fungal species isolated from flour were also isolated from different insect stages. A. flavus was the most common fungus and A. niger was isolated with a lower rate. The results about the isolated fungi either from the suspension of adult insects, larvae or cast skins may confirm the role of T. castaneum to carry and distribute fungi in different parts of the stored flour.

  19. Evaluation of replacing wheat flour with chia flour (Salvia hispanica L. in pasta

    Directory of Open Access Journals (Sweden)

    Matheus Rodrigues Oliveira

    2015-08-01

    Full Text Available In recent years, chia (Salvia hispanica L. has become increasingly more prevalent in the Brazilian diet and has triggered the interests of many researchers due to its functional properties and associated health benefits. The objective of this study was to develop pasta with different percentages of chia flour in lieu of wheat flour, and to evaluate the impact of chia on the nutritional, technological, and sensory properties of pasta. Pastas were prepared by replacing 7.5% (T1, 15% (T2, and 30% (T3 of wheat flour with chia flour relative to the control formulation (C. The quality of the pastas were evaluated through cooking tests (increase in weight and volume, cooking time, and loss of solids in the cooking water, chemical composition (moisture, fat, fiber, protein, ash, and carbohydrates, and color, using a Minolta colorimeter and sensory analysis by means of acceptance testing. Pasta made with chia flour had higher nutritional value and superior technological characteristics than did the control. Sensory analysis results showed that pasta with 7.5% chia flour had higher rates of acceptability in terms of the flavor, while the control pasta prevailed in terms of color and texture.

  20. INSECT AND MYCOFLORA INTERACTIONS IN MAIZE FLOUR ...

    African Journals Online (AJOL)

    Fusarium moniliforme had the highest occurrence of 36.7%, 28.1% and 33.3% while Aspergillus flavus/parasiticus had a frequency of 3.2%, 3.1% and 3% on primary isolation media of czapek dox agar (CDA), potato dextrose agar (PDA) and sabouraud dextrose agar (SDA) respectively, in maize flour without T. castaneum.

  1. Multigrain bread processing with extruded flours

    Directory of Open Access Journals (Sweden)

    María José Crosa Balestra

    2014-12-01

    Full Text Available The effect in bread quality of a new bread making process and two replacement levels (20%, 36% of refined wheat flour by extrusion precooked prepared based on combination of oats, soybeans and wheat bran was studied. Composite flour was characterized according to its functional properties (water absorption index, grain size and nutritional properties (protein, total fiber, soluble fiber, ash, fat. The volume, whiteness index, rheological measurements (hardness, cohesiveness, springiness and chewiness of the bread were monitored. No significant changes were recorded in hardness, elasticity and chewiness of bread according to the level of substitution of composite flour; bread with 36% substitution was 7% less cohesive, with 27% less volume bread with 20% substitution. The process conditions caused greatest impact on the quality of bread. The new process resulted in a 37% increase in volume, 6% elasticity, 15% of cohesiveness and 44% decrease in hardness and 34% in chewiness, compared to the traditional process. This trend continued in the four days following the date of processing. The substitution level of composite flour did not cause significant changes in hardness, elasticity and chewiness of bread, but changes were observed in cohesiveness and volume. Bread with 36% substitution was 7% less cohesive, with 27% less volume than the 20% substitution.

  2. 21 CFR 137.165 - Enriched flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Enriched flour. 137.165 Section 137.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... riboflavin, 24 milligrams of niacin, 0.7 milligrams of folic acid, and 20 milligrams of iron. (b) It may...

  3. Committed effective dose determination in cereal flours by gamma-ray spectrometry; Determinacao das doses efetivas por ingestao de farinhas de cereais atraves da espectrometria de raios gama

    Energy Technology Data Exchange (ETDEWEB)

    Scheibel, Viviane

    2006-07-01

    The health impact from radionuclides ingestion of foodstuffs was evaluated by the committed effective doses determined in commercial samples of South-Brazilian cereal flours (soy, wheat, corn, manioc, rye, oat, barley and rice flour). The radioactivity traces of {sup 228}Th, {sup 228}Ra, {sup 226}Ra, {sup 40}K, {sup 7}Be and {sup 137}Cs were measured by gamma-ray spectrometry employing a 66% relative efficiency HPGe detector. The energy resolution for the 1332.46 keV line of {sup 60}Co was 2.03 keV. The committed effective doses were calculated with the activities analyzed in the present flour samples, the foodstuff rates of consumption (Brazilian Institute of Geography and Statistics) and the ingestion dose coefficients (International Commission of Radiological Protection). The reliability median activities were verified with {chi}{sup 2} tests, assuring the fittings quality. The highest concentration levels of {sup 228}Th and {sup 40}K were 3.5 {+-} 0.4 and 1469 {+-} 17 Bq.kg{sup -1} for soy flour, respectively, with 95% of confidence level. The lower limit of detection for {sup 137}Cs ranged from 0.04 to 0.4 Bq.kg{sup -1}. The highest committed effective dose was 0.36 {mu}Sv.y{sup -1} for {sup 228}Ra in manioc flour (adults). All committed effective doses determined at the present work were lower than the UNSCEAR limits of 140 {mu}Sv.y{sup -1} and much lower than the ICRP (1991) limits of 1 mSv.y{sup -1}, for general public. There are few literature references for natural and artificial radionuclides in foodstuffs and mainly for committed effective doses. This work brings the barley flour data, which is not present at the literature and {sup 7}Be data which is not encountered in foodstuffs at the literature, besides all the other flours data information about activities and committed effective doses. (author)

  4. Determination of lead in rice grains by solid sampling HR-CS GFAAS.

    Science.gov (United States)

    Gunduz, Sema; Akman, Suleyman

    2013-12-01

    A study was performed for the determination of lead in rice grains directly by solid sampling high resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GFAAS) without digesting sample. The effects of sample amount, pyrolysis/atomization temperatures on the determination of lead in rice were investigated and optimized using a certificated rice flour. The lead concentrations were determined applying 800 °C of pyrolysis and 1800 °C of atomization temperatures without modifier. LOD (N=10, 3σ) and characteristic mass were 2.3 μg kg(-1) and 8.1 pg, respectively. The certified lead value of a rice flour CRM was found in its uncertainity limits. The lead contents of various rice samples obtained from markets in Turkey were between 0.009 and 0.162 mg kg(-1) which are in acceptable range. The average lead concentrations in various rice grains taken from the same package were significantly different from each other. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Lead enrichment in different genotypes of rice grains.

    Science.gov (United States)

    Chen, Gang; Sun, Guo-rong; Liu, Ai-ping; Zhou, Wei-dong

    2008-03-01

    Using environmental scanning electron microscopy and X-ray electron probe microanalysis, the lead content was studied in inner and outer surface of rice glume, surface of caryopsis, center of caryopsis, near aleuronic layer and aleuronic layer in 21 genotypes of rice grains. The results showed that the lead content in different part of 21 genotypes of rice grains changed as inner surface of rice glume > aleuronic layer > near aleuronic layer > surface of caryopsis > outer surface of rice glume > center of caryopsis. There were genetic differences in lead enrichment in different genotypes of rice grains, which reflected as the differences of lead content in the same part and different part of rice grains. In different genotypes of rice grains, there were significant non-linear correlations between lead content in the inner surface of rice glume, center of caryopsis, aleuronic layer and that in the other parts of rice grain. The results also indicated that the lead enrichment in the center of caryopsis regulated by glume and aleuronic layer. In addition, in different genotypes of rice grains, there were differences in regulation of lead enrichment among different parts, which changed non-linearly.

  6. Variation in cooking and eating quality traits in Japanese rice germplasm accessions.

    Science.gov (United States)

    Hori, Kiyosumi; Suzuki, Keitaro; Iijima, Ken; Ebana, Kaworu

    2016-03-01

    The eating quality of cooked rice is important and determines its market price and consumer acceptance. To comprehensively describe the variation of eating quality in 183 rice germplasm accessions, we evaluated 33 eating-quality traits including amylose and protein contents, pasting properties of rice flour, and texture of cooked rice grains. All eating-quality traits varied widely in the germplasm accessions. Principal-components analysis (PCA) revealed that allelic differences in the Wx gene explained the largest proportion of phenotypic variation of the eating-quality traits. In 146 accessions of non-glutinous temperate japonica rice, PCA revealed that protein content and surface texture of the cooked rice grains significantly explained phenotypic variations of the eating-quality traits. An allelic difference based on simple sequence repeats, which was located near a quantitative trait locus (QTL) on the short arm of chromosome 3, was associated with differences in the eating quality of non-glutinous temperate japonica rice. These results suggest that eating quality is controlled by genetic factors, including the Wx gene and the QTL on chromosome 3, in Japanese rice accessions. These genetic factors have been consciously selected for eating quality during rice breeding programs in Japan.

  7. Food supplementation for workers: flour enriched with omega -3

    Directory of Open Access Journals (Sweden)

    Adriana Nery de Oliveira

    2015-01-01

    Full Text Available The objective of this study was preparing a product (omega-3 flour to increase the nutritional value of the food for workers concerning the content of omega-3 fatty acids (n-3 FA. The omega-3 flour was prepared using waste (head sardines and leaves of carrot, flaxseed flour, manioc flour and spices. The fatty acids (FA concentration was analyzed by gas chromatography. A total of 28 FA were identified in the omega-3 flour. The concentration of eicosapentaenoic acid (EPA and docosahexaenoic acid (DHA were 329.23mg EPA 100 g-1 omega-3 flour and 545.35 mg DHA 100 g-1 omega-3 flour. To meet the minimum requirements of omega -3, it is necessary the intake 2.5 to 3 tablespoons (soup of omega-3 flour day-1.There were analyzed two meals (A and B generally consumed by workers without and with the addition of the omega-3 flour (1 and 2 tablespoons to verify if there was an increase of n-3 FA. It was concluded that there was a significant increase of these FA in both meals. It was found that the omega-3 flour is constituted of a good nutritional value, especially the n-3 FA, so the product can be used as a supplement in the feeding of the workers as well as in other segments.

  8. Formulation and characterization of bread using coconut-pulp flour and wheat flour composite with addition of xanthan-gum

    Science.gov (United States)

    Erminawati; Sidik, W.; Listanti, R.; Zulfakar, H.

    2018-01-01

    Coconut-pulp flour is coconut flour made from by-product of coconut-milk based food products. The flour contains no gluten and high fibre, which can be considered as functional potential food. Bread made from composite-flour of coconut-pulp flour and wheat flour was studied for its physic-chemical and sensory characteristics. Addition of hydrocolloid, like xanthan-gum, was aimed to provide viscoelasticity for the dough which is essential for baked product. Composite-flour proportion used in this study was; 10CPF/90WF, 15CPF/85WF and 20CPF/80WF; and xanthan gum to total flour of 0,1% and 0,4%. Variable observed were; crumb-texture, crumb-colour, taste of coconut, preference and flavour; moisture, ash, fiber and soluble-protein contents. The research showed that addition of coconut-pulp flour in the composite-flour decreased specific volume value and increased the bread texture produced. It also increased the bread moisture-content, ash-content, fibre-content and soluble protein-content. Moreover, the xanthan-gum addition resulted in decreased specific-volume value and increased texture and fiber-content of the bread produced. Overall, the sensory characteristic of crumb colour, flavour and panellist preference revealed better than control bread made from wheat flour, however its crumb texture harder compare to control bread made from wheat flour. This study showed that coconut-pulp flour potential to be developed for production of functional food.

  9. Effect of environmental conditions on the mechanical properties and fungal degradation of polycaprolactone/microcrystalline cellulose/wood flour composites

    Science.gov (United States)

    Ronald Sabo; Liwei Jin; Nicole Stark; Rebecca E. Ibach

    2013-01-01

    Polycaprolactone (PCL) filled with microcrystalline cellulose (MCC), wood flour (WF), or both were characterized before and after exposure to various environmental conditions for 60 days. PCL/WF composites had the greatest tensile strength and modulus compared to neat PCL or PCL composites containing MCC. Electron microscopy indicated better adhesion between WF...

  10. Characteristics of mutant lines of sweet potato flour

    International Nuclear Information System (INIS)

    Aryanti

    2012-01-01

    Research on mutation induction of sweet potato Sari variety has been conducted. Flour mutant lines were obtained from selection of M1V5 tubers irradiated by gamma rays at the dose of 10 Gy. Flour was made by peeling of tubers, then dried, blended and sieved. The quality test of flour have been done by measuring degree of whiteness, proximate, amylose contents, water content, soluble water, swelling power, and flour characteristics. The result of this work showed that flour of C6.26.13 mutant line had higher protein content than the parent plant with concentration of 3.62 % and its amylose content was also higher than the other mutant lines. The soluble water value of mutant lines were significant different compared to the parent plant from 1.82 to 2.25 % and swelling power from 4.28 to 5.55 %. The flour granule of the mutant line was different compared to the parent plant. (author)

  11. Evaluation of some properties of wheat-brewers' spent cassava flour ...

    African Journals Online (AJOL)

    brewers' spent cassava flour blends and that it has a lot of potential in the food industry especially its use as thickener and binding agent in the food systems. Keywords: Brewers' spent cassava flour, wheat flour, proximate, functional properties.

  12. A NOVEL FIRE RETARDANT AFFECTS FIRE PERFORMANCE AND MECHANICAL PROPERTIES OF WOOD FLOUR-HIGH DENSITY POLYETHYLENE COMPOSITES

    Directory of Open Access Journals (Sweden)

    Mingzhu Pan,

    2012-02-01

    Full Text Available Wood flour-high density polyethylene (HDPE composites were prepared to investigate the effects of ammonium polyphosphate based fire retardant content (2, 4, 6, 8, and 10-wt%, on the flammability, mechanical, and morphological properties of the wood flour-HDPE composites in this study. Cone calorimetry analysis showed that the addition of fire retardant could decrease the heat release rate (HRR and total smoke release of wood flour-HDPE composites, while it had no obviously effects on effective heat of combustion. Most of the decrease of the HRR occurred with the concentration of the fire retardant up to 4-wt%. With addition of fire retardant, the composites showed a decrease in tensile elongation at break and impact strength, and had no obvious effect on tensile and flexural strength. The scanning electron microscopy observation on the fracture surface of the composites indicated that fire retardant had a uniform dispersion in the wood flour-HDPE composites. However, interfacial bonding would be suggested to improve in wood flour-HDPE composites with ammonium polyphosphate based fire retardant.

  13. Solvent Retention Capacities of Oat Flour

    Directory of Open Access Journals (Sweden)

    Qianwen Niu

    2017-03-01

    Full Text Available This study measured the solvent retention capacities (SRCs of flours from eight oat varieties and one wheat variety against different solvents to explore the swelling volume of oat flour with different solvents, and thus provide a theoretical basis for quick β-glucan analysis. The SRC profile consists of water SRC (WSRC, 50% sucrose SRC (SSRC, 5% lactic acid SRC (LASRC, 5% Na2CO3 SRC (SCASRC, NaCl SRC (SCSRC, CaCl2 SRC (CCSRC, FeCl3 SRC (FCSRC, sodium cholate SRC (SCHSRC, NaOH (pH 10 SRC (SHSRC, Na2CO3 (pH 10 SRC (SCABSRC and SDS (pH 10 SRC (SDSSRC values, and a Chopin SRC kit was used to measure the SRC value. SRCs of the oat flours increased when the solvents turned from neutral (water and NaCl to acidic (5% lactic acid or alkaline (5% Na2CO3, CaCl2, FeCl3, NaOH and pH 10 Na2CO3, and rose as the metal ion valencies of the metal salts (NaCl, CaCl2 and FeCl3 increased. The β-glucan contents were significantly positively correlated with the SCSRC (0.83**, CCSRC (0.82**, SCHSRC (0.80** and FCSRC (0.78*. SRC measurements of β-glucan in oat flours revealed that the CCSRC values were related with β-glucan (0.64* but not related with protein and starch. CaCl2 could therefore potentially be exploited as a reagent for β-glucan assay.

  14. Radiosensitivity of red flour beetle tribolium castaneum

    International Nuclear Information System (INIS)

    Sattar, A.; Khattak, S.; Hamed, M.

    1992-07-01

    In this report radiosensitivity of red beetle has been discussed. Red flour beetle is the most injurious pest causing great losses to stored grain. Radiation is one of the best tools of insect control. Different radiation doses (50 to 200 krads) were employed for different age groups from 1 to 60 days. It is concluded from these results that 200 krad radiation dose caused 100% mortality in red beetle in all age group. (A.B.)

  15. Compositional Study for Improving Wheat Flour with Functional Ingredients

    Directory of Open Access Journals (Sweden)

    Livia Apostol

    2015-11-01

    Full Text Available Helianthus tuberosus L. is cultivated widely across for its edible tuber. As a source of inulin with aperient, cholagogue and tonic effects, its tubers have been used for the treatment of diabetes. Also, the leaves of Helianthus tuberosus L. show antipyretic, analgesic effects and are therefore used for the treatment of bone fracture, skin wound and pain. The main aim of this study is to establish the optimum dose from rheological and nutritional point of view of Helianthus tuberosus L. tuber flour and leaves flour used as functional ingredient in bakery products industry. The types of mixtures of flours used in this study was: P1–100% wheat flour; P2-93% wheat flour + 7% Helianthus tuberosus (5% tuber + 2% leaves; P3-92% wheat flour + 8% Helianthus tuberosus (5% tuber + 3% leaves; P4- 90% wheat flour + 10%  Helianthus tuberosus (5% tuber + 5% leaves; P5 -100% Helianthus tuber; P6- Helianthus leaves. The potential functional of wheat flour enriched with the Helianthus tuberosus, in different proportions, was evaluated concerning chemical composition and rheological behaviour of the doughs. Adding of the Helianthus tuberosus L. tuber and leaves provoked an effect increasing the levels of inulin, minerals and fiber in wheat flour. The rheological properties of dough showed that P2, kept the rheological parameters for the technological behavior in order to obtain an acceptable quality of the bakery products. 

  16. Physical and biochemical properties of green banana flour.

    Science.gov (United States)

    Suntharalingam, S; Ravindran, G

    1993-01-01

    Banana flour prepared from two cooking banana varieties, namely 'Alukehel' and 'Monthan', were evaluated for their physical and biochemical characteristics. The yields of flour averaged 31.3% for 'Alukehel' and 25.5% for 'Monthan'. The pH of the flour ranged from 5.4 to 5.7. The bulk density and particle size distribution were also measured. The average chemical composition (% dry matter) of the flours were as follows: crude protein, 3.2; crude fat, 1.3; ash, 3.7; neutral detergent fiber, 8.9; acid detergent fiber, 3.8; cellulose, 3.1; lignin, 1.0 and hemicellulose, 5.0. Carbohydrate composition indicated the flour to contain 2.8% soluble sugars, 70.0% starch and 12.0% non-starch polysaccharides. Potassium is the predominant mineral in banana flour. Fresh green banana is a good source of vitamin C, but almost 65% is lost during the preparation of flour. Oxalate content (1.1-1.6%) of banana flour is probably nutritionally insignificant. The overall results are suggestive of the potential of green bananas as a source of flour.

  17. Bioactivity of flours of seeds of leguminous crops Pisum sativum ...

    African Journals Online (AJOL)

    Bioactivity of flours of seeds of leguminous crops Pisum sativum, Phaseolus vulgaris and Glycine max used as botanical insecticides against Sitophilus oryzae Linnaeus (Coleoptera: Curculionidae) on sorghum grains.

  18. RESTRUKTURISASI MENIR MENJADI BERAS BERKALSIUM TINGGI DENGAN METODE EKSTRUSI Restructured Fine Grain Rice to High Calcium Rice by Extrusion Method

    Directory of Open Access Journals (Sweden)

    Chatarina Wariyah

    2012-05-01

    Full Text Available Indonesian calcium intake is still low. So, calcium fortification  in such as rice is important. Rice fortification by extru- sion method was conducted by mixing rice flour with fortificant solution, molding and drying. The rice that was resulted from this process is called ultra rice. Menir (finely ground grain rice will be used as raw material of ultra rice. The purposed of this research was to produce high calcium extrusion rice or ultra rice with physical, organoleptic properties and cooking  quality  as normal rice. The specific purposes were to evaluate the effect of the type and amount of binder(gluten and tapioca on the characteristics of ultra rice, to determine type and amount of binder that resulted high cal- cium ultra rice with high acceptability. The result showed that high calcium ultra rice with tapioca as binder had colour,texture and organoleptic properties as normal rice. The ultra rice texture tended harder than IR-64, but cooked-ultra ricewas softer. The colour of ultra rice with tapioca as binder was similar with IR-64, but ultra rice with gluten as binderwas more yellowness. The cooking quality of ultra rice was less acceptable than IR-64. The high acceptability of ultra rice  was made with 4 % tapioca as binder, and the characterictics of this ultra rice were : hardness 140.43N, deforma- tion 63.70 %, the colour with lightness (L 71.08,  yellowness (b 11.00, redness (a -0.27 and good cooking quality. ABSTRAK Angka kecukupan asupan kalsium masyarakat Indonesia saat ini masih rendah. Untuk itu perlu dilakukan fortifikasi pada pangan yang umum  dikonsumsi  masyarakat luas seperti beras. Salah satu cara fortifikasi beras adalah dengan metode ekstrusi yaitu mencampur larutan fortifikan dengan tepung beras, kemudian dicetak dan dikeringkan.  Berasyang dihasilkan sering disebut sebagai beras ultra. Untuk meningkatkan kemanfaatan hasil samping penggilingan padi,maka digunakan menir sebagai bahan baku beras ultra

  19. Control of insect pests with electrons

    International Nuclear Information System (INIS)

    Hayashi, Toru; Imamura, Taro; Miyanoshita, Akihiro; Todoriki, Setsuko

    2003-01-01

    Effects of electron beams with an energy of 2.5 MeV on insect pests were slightly smaller than those of gamma-rays. Electron beams at 400 Gy inactivated all the pests for cut flowers tested; spider mite (Tetraychus urticae), mealybug (Pseudococcus comstocki), leaf miner (Liriomyza trifolii), thrips (Thrips palmi, and Thrips tabaci), cutworm (Spodoptera litura) and aphid (Myzus persicae). Carnation, alstromeria, gladiolus, tulip, statice, stock, dendrobium, prairie gentian, oncidium, campanula, gloriosa, fern, gypsophila, freesia, lobelia, triteleia and gerbera were tolerant to electron beams at 400-600 Gy, while chrysanthemum, rose, lily, calla, antherium, sweet pea and iris were intolerant. Radiation-induced deterioration of chrysanthemum could be prevented by post-irradiation treatment with commercial preservative solutions or sugar solutions. Soft-electrons at 60 keV effectively inactivated eggs, larvae and pupae of red flour beetle (Tribolium castaneum) and Indian meal moth (Plodia interpunctella) and eggs of adzuki bean weevil (Callosobruchus chinensis) at a dose of 1 kGy. The adults of T. castaneum and P. interpunctella were inactivated by electron treatment at 5.0 kGy and 7.5 kGy, respectively. Adults of C. chinensis survived at 7.5 kGy, but were inactivated having lost ability to walk at 2.5 kGy. Soft-electrons at 60 keV could not completely inactivate the larvae of C. chinensis and smaller larvae (2nd instar) of maize weevil (Stiophilus zeamais) inside beans and grains, because the electrons with low penetration did not reach the larvae due to the shield of beans or grains. However, soft-electrons at 60 keV inactivated eggs, larger larvae (4th instar) and pupae of S. zeamais in rice grains, which indicated that S. zeamais was exposed to electrons even inside the grains. (author)

  20. Effect of Gamma Irradiation on Water Uptake Rate and Gelatinization of Brown Rice

    International Nuclear Information System (INIS)

    Shu, C.S.; Lee, J.W.; Lee, Y.S.; Byun, M.W.

    2004-01-01

    Effects of gamma irradiation on brown rice quality were evaluated. Brown rice was irradiated at absorbed dose of 1, 3 or 5 kGy, and ground. Water uptake, pasting properties, and physicochemical characteristics of flour samples were tested. Water uptake rates of irradiated samples were higher than that of control, and were dose-dependent. Hydration capacity decreased in sample irradiated at 5 kGy due to leaching out of soluble compounds, whereas no differences were observed among other irradiated samples and control

  1. The viscoelastic properties of the protein-rich materials from the fermented hard wheat, soft wheat and barley flours

    Science.gov (United States)

    The linear and non-linear rheological properties of the suspensions for the hard red spring wheat (HRS) flour, soft wheat (Pastry) flour, barley flour, as well as the remain residues of HRS flour, Pastry flour, and barley flour after fermentation were investigated. The linear and non-linear rheologi...

  2. Partial replacement of wheat flour by pumpkin seed flour in the production of cupcakes filled with carob

    OpenAIRE

    BATISTA, Jaqueline Eduarda Rodrigues; BRAGA, Lucas Pereira; OLIVEIRA, Renata Corrêa de; SILVA, Edson Pablo; DAMIANI, Clarissa

    2018-01-01

    Abstract Pumpkin seeds are considered waste and its composition has high protein content, being feasible for human consumption, also reducing costs in waste treatment. In this work we provided an alternative to reuse the wastes of pumpkin seed applied in cupcakes formulation as a complementary source to wheat flour. Four formulations with different proportions of pumpkin seed flour were investigated. The effects of partial wheat flour substitution were evaluated using the parameters texture, ...

  3. Determination of sixteen elements and arsenic species in brown, polished and milled rice.

    Science.gov (United States)

    Narukawa, Tomohiro; Matsumoto, Eri; Nishimura, Tsutomu; Hioki, Akiharu

    2014-01-01

    The concentrations of 16 elements in 10 rice flour samples and the distribution of the elements in the rice grains from which the flour were made were determined by ICP-MS and ICP-OES after microwave-assisted digestion of the samples. Arsenic speciation analysis was carried out by HPLC-ICP-MS following heat-assisted extraction of the sample. The concentrations of inorganic As (As(III) and As(V)), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) and their distribution in the rice grains were determined. Portions of the brown rice were polished/milled to different degrees to yield milled off samples and polished rice samples. All samples were powdered and analyzed for 16 elements and for As species. The recoveries and mass balances for all elements in all samples showed good agreements with the starting materials. As(III), As(V), MMAA and DMAA were detected, and the sums of the concentrations of all species in the extract were 86-105% of the total As concentration in each case.

  4. Impact of Emulsifiers Addition on the Retrogradation of Rice Gels during Low-Temperature Storage

    Directory of Open Access Journals (Sweden)

    Zhe Yang

    2017-01-01

    Full Text Available Rice and its products are widely consumed in Asian countries; however, starch retrogradation decreases the quality and shortens the shelf-life of rice foods particularly at low temperature. In this study sucrose ester (SE, glycerol monostearate (GMS, and sodium stearoyl lactylate (SSL were added to rice flour and corresponding rice gels. Then, gelatinization properties, retrogradation characteristics, texture, and water content of these rice gels were investigated at 4°C and −20°C storage, respectively. The results demonstrated that the rice gels with 0.2% GMS had the lowest retrogradation index (ΔHr/ΔHg (11.84% and hardness (1359 g at 4°C for a 10 d period, which was significantly lower in comparison to control and the other two emulsifiers (P<0.05. Adhesiveness and water content were increased compared to the other samples. Furthermore, the retrogradation of rice gels stored at 4°C was comparatively rapid compared to gels stored at −20°C. Gel samples stored at −20°C were still acceptable for more than 15 days. Thus it was revealed that GMS has the potential to retard starch retrogradation and produce high-quality rice products in preservation.

  5. Processing and characterization of an extruded snack made from broken rice flour and broken common bean flour

    OpenAIRE

    CARVALHO, Ana Vânia; BASSINELLO, Priscila Zaczuk; MATTIETTO, Rafaella de Andrade; CARVALHO, Rosângela Nunes; RIOS, Alessandro de Oliveira; SECCADIO, Lara Lima

    2012-01-01

    Este trabalho teve por objetivo desenvolver nova formulação de snack por extrusão termoplástica a partir de mistura de farinhas de quirera de arroz e de bandinha de feijão, bem como avaliar o potencial nutricional, tecnológico e sensorial do novo produto. A farinha de bandinha de feijão carioca foi incorporada à farinha de quirera de arroz na proporção de 30%. O snack foi produzido em extrusora monorrosca, escala piloto. Os parâmetros de extrusão foram fixos, utilizando-se três zonas de extru...

  6. Acceptance and purchase intent of US consumers for nonwheat rice butter cakes.

    Science.gov (United States)

    Sae-Eaw, A; Chompreeda, P; Prinyawiwatkul, W; Haruthaithanasan, V; Suwonsichon, T; Saidu, J E; Xu, Z

    2007-03-01

    This study evaluated consumer acceptance and purchase intent of nonwheat butter cake formulations prepared with Thai jasmine rice flour. Three nonwheat rice butter cakes were prepared with varying amounts of powdered emulsifier (propylene glycol ester:diacetyl tartaric acid ester of monoglyceride, 8:2) at 0% (product A), 7.5% (product B), and 15% (product C) of the margarine content (15%) in the cake formulation. A commercial wheat-based butter cake served as the control. Consumers (n= 400) evaluated acceptability of 9 sensory attributes using a 9-point hedonic scale. Overall acceptance and purchase intent were determined with a binomial (yes/no) scale. At least 81% of consumers accepted products B and C, of which 42.1% and 47%, respectively, would purchase the products if commercially available. Product A was neither liked nor disliked with an overall liking score of 5.39. The butter cake products were differentiated by textural acceptability (overall texture, softness, and moistness) with a canonical correlation of 0.71 to 0.79. Overall liking and taste influenced overall acceptance and purchase intent. Odor influenced purchase intent (P= 0.0014), but not overall acceptance. The odds ratio of overall liking was 3.462 for purchase intent, indicating the probability of the product being purchased is 3.462 times higher (than not being purchased, P flour with Thai jasmine rice flour for production of butter cake products acceptable to American consumers.

  7. The cadmium and lead content of the grain produced by leading Chinese rice cultivars.

    Science.gov (United States)

    Xie, L H; Tang, S Q; Wei, X J; Shao, G N; Jiao, G A; Sheng, Z H; Luo, J; Hu, P S

    2017-02-15

    The cadmium (Cd) and lead (Pb) content in both white and wholemeal flour milled from 110 leading rice cultivars was assessed. The white flour Cd content ranged from <0.0025 to 0.2530mg/kg (geometric mean (GM)=0.0150mg/kg), while its Pb content ranged from <0.0250 to 0.3830mg/kg (GM=0.0210mg/kg). The indica types took up higher amounts of Cd and Pb than did the japonica types. Although the heavy metal content of wholemeal flour tended to higher than that of white flour, nevertheless 84.5% (Cd) and 95.4% (Pb) of the entries were compliant with the national maximum allowable concentration of 0.2000mg/kg of each contaminant. An analysis of the Cd content in the white flour of three indica type cultivars grown in two consecutive years at two locations indicated that Cd content may be significantly affected by the conditions prevailing in the growing season. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Rice peasants and rice research in Colombia

    NARCIS (Netherlands)

    Spijkers, P.A.N.M.

    1983-01-01

    Rice has been grown as a food crop in Latin America from early colonial times. In Colombia rice became a prominent subsistence crop especially on the north coast where it has been grown since the 17th century, sometimes also as a commercial crop. During the last twenty years there has been a sharp

  9. Substituting Normal and Waxy-Type Whole Wheat Flour on Dough and Baking Properties

    Science.gov (United States)

    Choi, Induck; Kang, Chun-Sik; Cheong, Young-Keun; Hyun, Jong-Nae; Kim, Kee-Jong

    2012-01-01

    Normal (cv. Keumkang, KK) and waxy-type (cv. Shinmichal, SMC) whole wheat flour was substituted at 20 and 40% for white wheat flour (WF) during bread dough formulation. The flour blends were subjected to dough and baking property measurement in terms of particle size distribution, dough mixing, bread loaf volume and crumb firmness. The particle size of white wheat flour was the finest, with increasing coarseness as the level of whole wheat flour increased. Substitution of whole wheat flour decreased pasting viscosity, showing all RVA parameters were the lowest in SMC40 composite flour. Water absorption was slightly higher with 40% whole wheat flour regardless of whether the wheat was normal or waxy. An increased mixing time was observed when higher levels of KK flour were substituted, but the opposite reaction occurred when SMC flour was substituted at the same levels. Bread loaf volume was lower in breads containing a whole wheat flour substitution compared to bread containing only white wheat flour. No significant difference in bread loaf volume was observed between normal and waxy whole flour, but the bread crumb firmness was significantly lower in breads containing waxy flour. The results of these studies indicate that up to 40% whole wheat flour substitution could be considered a practical option with respect to functional qualities. Also, replacing waxy whole flour has a positive effect on bread formulation over normal whole wheat flour in terms of improving softness and glutinous texture. PMID:24471084

  10. Sensitization to lupine flour: is it clinically relevant?

    NARCIS (Netherlands)

    de Jong, N. W.; van Maaren, M. S.; Vlieg-Boersta, B. J.; Dubois, A. E. J.; de Groot, H.; Gerth van Wijk, R.

    2010-01-01

    Lupinus angustifolius (blue lupine) is used for human and animal consumption. Currently, the lupine content in bread varies from 0% to 10% and from 0.5% to 3% in pastry. Although lupine flour is present in many products, anaphylaxis on lupine flour is rarely seen. The aim of our study was to

  11. Sensitization to lupine flour : is it clinically relevant?

    NARCIS (Netherlands)

    de Jong, N. W.; van Maaren, M. S.; Vlieg-Boersta, B. J.; Dubois, A. E. J.; de Groot, H.; van Wijk, R. Gerth

    2010-01-01

    Background Lupinus angustifolius (blue lupine) is used for human and animal consumption. Currently, the lupine content in bread varies from 0% to 10% and from 0.5% to 3% in pastry. Although lupine flour is present in many products, anaphylaxis on lupine flour is rarely seen. Objective The aim of our

  12. Functional properties of processed pigeon pea ( Cajanus cajan ) flour

    African Journals Online (AJOL)

    Germination increased water absorption capacity, bulk density, oil absorption capacity, foaming capacity, foaming stability, emulsion activity, nitrogen solubility and decreased gelatin and wetability of the pigeon pea flour. Germinated pigeon pea flour has great potentials in food prperations that require hydration to improve ...

  13. Gamma radiation influence on technological characteristics of wheat flour

    Science.gov (United States)

    Teixeira, Christian A. H. M.; Inamura, Patricia Y.; Uehara, Vanessa B.; Mastro, Nelida L. d.

    2012-08-01

    This study aimed at determining the influence of gamma radiation on technological characteristics of wheat (Triticum sativum) flour and physical properties of pan breads made with this flour. The bread formulation included wheat flour, water, milk, salt, sugar, yeast and butter. The α-amylase activity of wheat flour irradiated with 1, 3 and 9 kGy in a Gammacell 220 (AECL), one day, five days and one month after irradiation was evaluated. Deformation force, height and weight of breads prepared with the irradiated flour were also determined. The enzymatic activity increased—reduction of falling number time—as radiation dose increased, their values being 397 s (0 kGy), 388 s (1 kGy), 343 s (3 kGy) and 293 s (9 kGy) respectively, remaining almost constant over the period of one month. Pan breads prepared with irradiated wheat flour showed increased weight. Texture analysis showed that bread made of irradiated flour presented an increase in maximum deformation force. The results indicate that wheat flour ionizing radiation processing may confer increased enzymatic activity on bread making and depending on the irradiation dose, an increase in weight, height and deformation force parameters of pan breads made of it.

  14. Rheological and qualitative characteristics of pea flour incorporated cracker biscuits

    Directory of Open Access Journals (Sweden)

    Jolana Karovičová

    2013-01-01

    Full Text Available The suitability of pea flour for cracker biscuits production was investigated in this study. Pea flour was characterised by high protein (21.46 % and ash (3.11 % content and exhibited relatively high emulsifying (37.50 ml/100 ml and foaming (53.50 ml/100 ml capacity. The effect of pea flour incorporation to wheat dough (substitution levels 0, 10, 20 and 30 % on the rheological properties, physical characteristics and sensory parameters of cracker biscuits were also evaluated. Farinographic measurements showed that pea flour addition resulted in increasing of water absorption (from 58.90 to 61.80 % and dough development time (from 3.55 to 4.50 min, whereas dough stability was decreased (from 6.69 to 3.50 min. It was also found that incorporation of pea flour to cracker biscuits modified physical properties of final products by different ways (decreasing of volume index, width and spread ratio, increasing of thickness. From the sensory evaluation revealed that cracker biscuits prepared from blend flour contained 10 % pea flour showed no significant differences from wheat cracker biscuits. Higher levels of pea flour in the products adversely affected the odour, taste, firmness, colour and overall acceptance of final products.

  15. [Effect of soybean lipoxygenae on baking properties of wheat flour].

    Science.gov (United States)

    Permiakova, M D; Trufanov, V A

    2011-01-01

    Changes in bread-baking properties of wheat flour caused by soybean lipoxygenase and polyunsaturated fatty acids were studied. A positive effect of soybean flour added during dough kneading in an amount of 2% was demonstrated. A method for dough fermentation increasing the loaf volume and improving organoleptic characteristics and total bread-baking estimate is recommended.

  16. Production and evaluation of noodles from flour blends of cocoyam ...

    African Journals Online (AJOL)

    Flour blends were prepared from two cultivars of cocoyam ( and . ), African breadfruit ( ) and wheat ( ) at different proportions and extruded into noodles with a locally fabricated and manually operated singlescrew extruder. Proximate composition and the functional properties of the different flour blends were evaluated. The

  17. "Fufu" flour processing in Ghana: Costs, returns and institutional ...

    African Journals Online (AJOL)

    The introduction of "fufu" flour is an innovative business venture that young entrepreneurs should explore. However, the level of costs and returns as well as institutional support to sustain the industry is not well understood. This study was conducted to determine the profitability of "fufu" flour and the strength of the ...

  18. optimizing soybean flour., whey powder. and colostrum ratios for ...

    African Journals Online (AJOL)

    l4 days. If preserved colostrum could be supplemented with reconstituted soybean flour and whey powder, the period of colostrum feeding could be extended to 4 weeks. Various researchers reported the successful inclusion of soybean flour and/or soybean protein concentrate in milk replacers (Schmutz, Cravens, Soldner ...

  19. Quality assessment of flour and bread from sweet potato wheat ...

    African Journals Online (AJOL)

    This study was to assess the quality of the flour and bread produced from sweet potato wheat composite flour blends. Matured and freshly harvested sweet potato (Ipomea batatas L.) was obtained from a local market in Akure, Nigeria. The tubers were thoroughly washed, peeled, washed again, drained, chipped, oven dried, ...

  20. Bread Making Potential of Composite Flour of Wheat-Acha ...

    African Journals Online (AJOL)

    Bread-making potentials of composite flours containing 90% wheat and 10% acha enriched with 0-15% cowpea flour were investigated. Proximate composition and functional properties of the blends were studied using AOAC standard methods. Bread loaves were prepared from the blends using the straight dough method ...

  1. TESTING FOR RISK PREMIUMS IN THE WHEAT-FLOUR SUBSECTOR

    OpenAIRE

    Cotterill, Ronald W.; Salih, Hachim M.

    1992-01-01

    This paper specifies a model of wholesale flour price determination that incorporates risk measures for input prices (wheat) and a joint output price (millfeed). Tests using daily price data for a Buffalo flour miller indicate that risk premiums do exist. Moreover, these premiums persist in a model that incorporates hedging.

  2. Acetylated starch of Ofada rice as a sustained polymer in ...

    African Journals Online (AJOL)

    Objectives: To formulate and evaluate repaglinide microspheres using acetylated starch of the indigenous rice species Oryza glaberrima Steud (Ofada) as polymer. Materials and Methods: Ofada rice starch was acetylated with acetic anhydride in pyridine (DS 2.68) and characterized for morphology (Scanning electron ...

  3. The production of Pleurotus sajor-caju in peach palm leaves (Bactris gasipaes and evaluation of its use to enrich wheat flour

    Directory of Open Access Journals (Sweden)

    Paula Fernanda Bomfim Oliveira Cogorni

    2014-06-01

    Full Text Available The aim of this study was to evaluate of Pleurotus sajor-caju production in peach palm leaves and the addition of different fractions of mushroom powder to wheat flour to increase its nutritional value without changing its characteristics. The best yield (48.4%, biologic efficiency (4.5%, and Pr (0.36 g/day values were obtained using 20% inoculum fraction and 10% rice bran fraction. The Pleurotus sajor-caju fruiting body cultivated under these conditions had the following composition in 100 g: 29.91 g (carbohydrates, 42.92 g (proteins, 1.24 g (lipids, 15.93 g (fibers, 7.42 g (ashes, 1.6 g (phosphorus, 2.7 g (potassium, 8.73 mg (iron, 23.75 mg (sodium, 0.34 mg (thiamine, and 0.57 mg (riboflavin. The wheat flour with mushroom powder had reduced sugar content, but it did not have increased fat content. The fiber, protein, phosphorus, potassium, iron, and riboflavin contents were increased mainly when 10% mushroom powder was added to the wheat flour. Furthermore, this flour does not undergo drastic alterations in its physicochemical characteristics such as in moisture, wet gluten, color, and falling number.

  4. KAJIAN FORMULASI BISKUIT JAGUNG DALAM RANGKA SUBSTITUSI TEPUNG TERIGU [Study on Corn Biscuit Formulation to Subtitute of wheat Flour

    Directory of Open Access Journals (Sweden)

    Cynthia Gracia C.L1*

    2009-06-01

    Full Text Available The research was conducted to study the formulation of substitute by corn flour. The flour used roasted corn flour and unroasted corn flour. Results showed that biscuit’s made of 80 gr corn flour and 20 gr wheat flour were accepted by panelist’s and the best formulation was 80 gr corn flour, 20 gr wheat flour, 50 gr margarine, 50 gr sugar and 10 gr yellow egg both of two corn flour. Roasting treatment of corn flour significantly affected fat content, carbohydrate content and digestibility of protein of the biskuit.

  5. Rheology of Potato flour Mixes and Wheat to Make Bread

    Directory of Open Access Journals (Sweden)

    Ely Fernando Sacón-Vera

    2016-07-01

    Full Text Available Evaluate the rheological properties of flour mixes Ipomoea batata and Triticum vulgare for the preparation of bread dough, was the goal of this research for it a completely randomized design, as treatments sweet potato flour was used varieties are used: Toquecita, Guayaco Purple, Purple Ecuador, Brazil and Ina Purple in a 30/70 ratio (sweet potato flour / wheat flour respectively. The rheological variables: water absorption, development time, weakening of the dough stability, water absorption index (C1, mixing rate (C2, gluten strength index (C3, gel viscosity (C4, resistance index amylase (C5 and starch retro gradation index (C6 were evaluated with Mixolab equipment. The results showed that the variety Purple Brazil showed better characteristics of flours recommended premixes for the baking process in response to these indices

  6. Chilean prosopis mesocarp flour: phenolic profiling and antioxidant activity.

    Science.gov (United States)

    Schmeda-Hirschmann, Guillermo; Quispe, Cristina; Soriano, Maria Del Pilar C; Theoduloz, Cristina; Jiménez-Aspée, Felipe; Pérez, Maria Jorgelina; Cuello, Ana Soledad; Isla, Maria Inés

    2015-04-17

    In South America, the mesocarp flour of Prosopis species plays a prominent role as a food resource in arid areas. The aim of this work was the characterization of the phenolic antioxidants occurring in the pod mesocarp flour of Chilean Prosopis. Samples were collected in the Copiapo, Huasco and Elqui valleys from the north of Chile. The samples of P. chilensis flour exhibited a total phenolic content ranging between 0.82-2.57 g gallic acid equivalents/100 g fresh flour weight. The highest antioxidant activity, measured by the DPPH assay, was observed for samples from the Huasco valley. HPLC-MS/MS analysis allowed the tentative identification of eight anthocyanins and 13 phenolic compounds including flavonol glycosides, C-glycosyl flavones and ellagic acid derivatives. The antioxidant activity and the phenolic composition in the flour suggest that this ancient South American resource may have potential as a functional food.

  7. Chilean Prosopis Mesocarp Flour: Phenolic Profiling and Antioxidant Activity

    Directory of Open Access Journals (Sweden)

    Guillermo Schmeda-Hirschmann

    2015-04-01

    Full Text Available In South America, the mesocarp flour of Prosopis species plays a prominent role as a food resource in arid areas. The aim of this work was the characterization of the phenolic antioxidants occurring in the pod mesocarp flour of Chilean Prosopis. Samples were collected in the Copiapo, Huasco and Elqui valleys from the north of Chile. The samples of P. chilensis flour exhibited a total phenolic content ranging between 0.82–2.57 g gallic acid equivalents/100 g fresh flour weight. The highest antioxidant activity, measured by the DPPH assay, was observed for samples from the Huasco valley. HPLC-MS/MS analysis allowed the tentative identification of eight anthocyanins and 13 phenolic compounds including flavonol glycosides, C-glycosyl flavones and ellagic acid derivatives. The antioxidant activity and the phenolic composition in the flour suggest that this ancient South American resource may have potential as a functional food.

  8. Expansion of the whole wheat flour extrusion

    DEFF Research Database (Denmark)

    Cheng, Hongyuan; Friis, Alan

    2008-01-01

    A new model framework is proposed to describe the expansion of extrudates with extruder operating conditions based on dimensional analysis principle. The Buckingham pi dimensional analysis method is applied to form the basic structure of the model from extrusion process operational parameters. Us....... Using the Central Composite Design (CCD) method, whole wheat flour was processed in a twin-screw extruder with 16 trials. The proposed model can well correlate the expansion of the 16 trials using 3 regression parameters. The average deviation of the correlation is 5.9%....

  9. Processing and characterization of extruded breakfast meal formulated with broken rice and bean flour Processamento e caracterização de refeição matinal extrusada formulada com farinha de grãos quebrados de arroz e feijão

    Directory of Open Access Journals (Sweden)

    Ana Vânia Carvalho

    2012-09-01

    Full Text Available The objective of this work was to develop an extruded breakfast product containing broken rice and split old beans and to verify the influence of the extrusion process on their physicochemical, technological, and sensory characteristic. The final product had a protein content of 9.9 g.100 g-1, and therefore it can be considered a good source of proteins for children and teenagers. The dietary fiber content of the final edible product was 3.71 g.100 g-1. Therefore, the breakfast meal may be considered as a source of dietary fiber according to Brazilian law . As for the technological properties, the extruded product presented an expansion index of 8.89 and apparent density of 0.25 g.cm-3. With regard to the sensory analysis, the acceptance average was ranked between 6.8 and 7.7, corresponding to the categories "liked slightly" and "liked very much". With regard to purchase intention, 79% of the panelists said they would certainly or possibly purchase the product. Broken rice and split old beans are interesting alternatives for the elaboration of extruded breakfast products presenting good nutritional, technological, and sensory qualities.O objetivo deste trabalho foi elaborar um produto matinal extrusado de quirera de arroz e bandinha de feijão, além de verificar a influência do processo de extrusão nas suas características físico-químicas, nutricionais, tecnológicas e sensoriais. O produto final apresentou teor considerável de proteínas (9,9 g.100 g-1, podendo ser considerado uma boa fonte desse nutriente para crianças e adolescentes. Para a fibra alimentar, observou-se teor de 3,71 g.100 g-1 do produto pronto para o consumo. Dessa forma, o floco matinal de arroz e feijão pode receber a alegação de alimento fonte de fibras, de acordo com a legislação brasileira. Com relação às propriedades tecnológicas, o extrusado estudado apresentou índice de expansão de 8,89 e densidade aparente de 0,25 g.cm-3. Quanto à an

  10. Induced Mutations in Thai Rice

    International Nuclear Information System (INIS)

    Klakhaeng, Kanchana

    2014-01-01

    Rice is the primary source of food for more than half of the world's population. It benefits greatly from technological inputs in the area of breeding such as induced mutation. Induced mutation can produce mutants with significant improvement in plant type, maturity, yields and protein ratio when compared to the parent. These improved traits enable the mutants to fit into farming systems with either shorter or longer growing seasons. Three induced mutant rice varieties, including RD6, RD10 and RD15, are well accepted by farmers and consumers in Thailand. RD6 and RD15 were aromatic, photosensitive varieties which were derived from KDML105 by acute irradiation of 20 and 15 kilorad gamma ray, respectively. After induced mutation, pedigree selection was applied. RD6 showed drought tolerance and also good grain quality including softness and good aroma with a higher average yield than the famous glutinous variety, San-Pah-Tong. Additionally, it was resistant to blast and brown spot diseases with an average yield of 4.19 tons/ha. RD15 showed drought tolerance and resistance to brown spot disease with the highest yield of 3.5 tons/ha. These two mutant varieties are currently the most famous aromatic rice varieties in Thailand. On the other hand, RD10 is a glutinous, photoperiod insensitive rice variety which was derived from RD1 by irradiation of 1 kilorad fast neutrons. RD10 showed good grain quality such as softness and stickiness with the yield of 4.25 tons/ha. As an on-going project, recommended rice varieties were irradiated with electron beam for anaerobic germination ability, submergence tolerance, stagnant-flood tolerance and also internode elongation.

  11. Obtaining high purity silica from rice hulls

    Directory of Open Access Journals (Sweden)

    José da Silva Júnior

    2010-01-01

    Full Text Available Many routes for extracting silica from rice hulls are based on direct calcining. These methods, though, often produce silica contaminated with inorganic impurities. This work presents the study of a strategy for obtaining silica from rice hulls with a purity level adequate for applications in electronics. The technique is based on two leaching steps, using respectively aqua regia and Piranha solutions, which extract the organic matrix and inorganic impurities. The material was characterized by Fourier-transform infrared spectroscopy (FTIR, powder x-ray diffraction (XRD, x-ray fluorescence (XRF, scanning electron microscopy (SEM, particle size analysis by laser diffraction (LPSA and thermal analysis.

  12. Changes in total carbohydrate and total antioxidant activity induced by gamma irradiation of wheat flour

    International Nuclear Information System (INIS)

    Manupriya, B.R.; Shenoy, K. Bhasker; Patil, Shrikant L.; Somashekarappa, H.M.

    2015-01-01

    Wheat is a staple food grain in India after rice and occupies number one position in the world. The wheat crop not only gives food grains but also gives fodder for animals. Among many preservation methods irradiation is a current technique used to overcome infestation, contamination and spoilage of stored grains. The present study is aimed to check the changes in composition of irradiated wheat flour. Wheat flour was exposed to five different irradiation doses (0.25 KGy, 0.5KGy, 1KGy, 5KGy and 10 KGy) by using 60 Co gamma-irradiation chamber. Irradiated flour was stored in air sealed polyethylene pouch and plastic container at room temperature for different time intervals (0 th day, 1 month and 3 months). The stored flour was checked for total antioxidant activity by phosphomolybdate method and total carbohydrates concentration by phenol-sulphuric acid method. On 0 th day total antioxidant activity and total carbohydrate concentration was found to be increased at 0.5KGy (0.113 mg/ml and 0.045 mg/ml respectively) when compared to control (0.79 mg/ml and 39.5 mg/ml). Similarly for 1 month stored samples of air sealed polyethylene pouch total antioxidant activity and total carbohydrate concentration was observed to be increased at 0.5KGy (0.117 mg/ml and 0.045mg/ml respectively) when compared to control (0.096 mg/ml and 0.035 mg/ml). But in case of stored samples of plastic container total antioxidant activity increased at 0.25KGy (0.060 mg/ml) and total carbohydrate increased at 5KGy (0.051 mg/ml). Increased and decreased values were found in both factors for 3 months stored samples of air sealed polyethylene pouch and plastic container. Total antioxidant activity increased at 5KGy (0.072 mg/ml) for polyethylene bag samples and at 0.5KGy (0.137 mg/ml) for plastic container sample. Same way total carbohydrate concentration increased at 0.25KGy (0.046 mg/ml) and at 1KGy (0.045 mg/ml) respectively. This increase is due to affects of γ-irradiation on biomolecules by

  13. Radiation disinfection of rice-straw products

    International Nuclear Information System (INIS)

    Ito, Hitoshi; Ishigaki, Isao; Ohki, Yumi.

    1991-01-01

    For the quarantine treatment of rice-straw products from foreign countries, irradiation effects of gamma-rays and electron beams on plant pathogenic microorganisms especially on fungi were investigated. The total aerobic bacteria in rice-straw was determined to be 3x10 7 - 3x10 8 per gram which consisted mainly of Pseudomonas, Flavobacterium, Arthrobacter and Erwinia. The principal bacteria in rice-straw could be eliminated with 5 kGy of gamma irradiation. Deinococcus proteolyticus and Pseudomonas radiora were the main survivors at 5 to 12 kGy of irradiation. Saprophytic fungus which belongs to Dimorphospora also survived up to 8 kGy of irradiation. The D 10 values of 26 strains of fungi isolated from rice-straw were 1.1 to 2.5 times higher in the dry condition compared to the values when irradiated in 0.067 M phosphate buffer solution. The induction dose in the dry condition also increased from 1.5 to 10 times than that in the wet condition. In the case of electron beam irradiation of fungi under dry conditions, D 10 values were about 1.3 times higher than that of gamma irradiation. From this study, the dose necessary to reduce the plant pathogenic fungi in rice-straw at a level below 10 -4 per gram was estimated to be as 7-8 kGy for gamma-irradiation and 10 kGy for electron beam irradiation. (author)

  14. Substitution of wheat flour with “acha” ( Digitaria exilis ) for bread ...

    African Journals Online (AJOL)

    Effect of wheat flour (WF) substitution with 'Acha' flour (AF) on the quality attributes in bread making was investigated using the following composite blends ratios 85:15, 80:20, 75:25, 70:30, 100:0 (AF) with 100% wheat flour as control. Proximate analysis on both composite flours and their bread products, as well as sensory ...

  15. Fundamental and empirical rheological behaviour of wheat flour doughs and comparison with bread making performance

    NARCIS (Netherlands)

    Janssen, A. M.; vanVliet, T; Vereijken, JM

    The rheological characteristics of wheat flour doughs from the cultivars Obelisk and Katepwa and of biscuit flour doughs, and also of biscuit flour doughs containing glutens isolated from cv. Obelisk and cv. Katepwa flour, were compared and discussed in relation to bread making performance. Four

  16. Effect of partial substitution of dried plantain flour on the sensory and ...

    African Journals Online (AJOL)

    Effect of partial substitution of dried plantain flour on the sensory and functional properties of maize flour based snack ( Kokoro ) ... It is concluded that plantain flour can be successfully blended with maize flour for the production of good kokoro product. Recommendation is made for the large scale production of fortified ...

  17. Determination of stable cesium and strontium in rice samples by inductively coupled plasma mass spectrometry

    Science.gov (United States)

    Srinuttrakul, W.; Yoshida, S.

    2017-06-01

    For long-term radiation dose assessment models, food ingestion is one of the major exposure pathways to human. In general, the stable isotopes can serve as analogues of radioisotopes. In this study, rice samples were collected from 30 paddy fields in Si Sa Ket, Yasothon and Roi Et in the northeast of Thailand in November 2014. The concentrations of stable cesium (Cs-133) and strontium (Sr-88) in polished rice were determined by inductively coupled plasma mass spectrometry (ICP-MS). The standard reference material of rice flour (NIST 1568a) with spiked Cs and Sr was used to validate the analytical method. The concentration of Cs in polished rice from Si Sa Ket, Yasothon and Roi Et was 0.158 ± 0.167 mg kg-1, 0.090 ± 0.117 mg kg-1 and 0.054 ± 0.031 mg kg-1, respectively. The concentration of Sr in polished rice from Si Sa Ket, Yasothon and Roi Et was 0.351 ± 0.108 mg kg-1, 0.364 ± 0.215 mg kg-1 and 0.287 ± 0.102 mg kg-1, respectively. Comparison of the results with Japanese data before the Fukushima Di-ichi nuclear power plant accident showed that the concentrations of both Cs and Sr for Thai rice were higher than those for Japanese rice.

  18. Determination of stable cesium and strontium in rice samples by inductively coupled plasma mass spectrometry

    International Nuclear Information System (INIS)

    Srinuttrakul, W; Yoshida, S

    2017-01-01

    For long-term radiation dose assessment models, food ingestion is one of the major exposure pathways to human. In general, the stable isotopes can serve as analogues of radioisotopes. In this study, rice samples were collected from 30 paddy fields in Si Sa Ket, Yasothon and Roi Et in the northeast of Thailand in November 2014. The concentrations of stable cesium (Cs-133) and strontium (Sr-88) in polished rice were determined by inductively coupled plasma mass spectrometry (ICP-MS). The standard reference material of rice flour (NIST 1568a) with spiked Cs and Sr was used to validate the analytical method. The concentration of Cs in polished rice from Si Sa Ket, Yasothon and Roi Et was 0.158 ± 0.167 mg kg -1 , 0.090 ± 0.117 mg kg -1 and 0.054 ± 0.031 mg kg -1 , respectively. The concentration of Sr in polished rice from Si Sa Ket, Yasothon and Roi Et was 0.351 ± 0.108 mg kg -1 , 0.364 ± 0.215 mg kg -1 and 0.287 ± 0.102 mg kg -1 , respectively. Comparison of the results with Japanese data before the Fukushima Di-ichi nuclear power plant accident showed that the concentrations of both Cs and Sr for Thai rice were higher than those for Japanese rice. (paper)

  19. Storage changes in the quality of sound and sprouted flour.

    Science.gov (United States)

    Sur, R; Nagi, H P; Sharma, S; Sekhon, K S

    1993-07-01

    Sound and sprouted flours (24 and 48 hr) from bread wheat (WL-1562), durum wheat (PBW-34) and triticale (TL-1210) were stored at room temperature (34.8 degrees C) and relative humidity (66.7%) for 0, 45, 90 and 135 days to assess the changes in physico-chemical and baking properties. Protein, gluten, sedimentation value, starch and crude fat decreased during storage in all the samples; however, the decrease was more in sprouted flours. Free amino acids, proteolytic activity, diastatic activity and damaged starch decreased with increase in storage period. Total sugars and free fatty acids increased more rapidly in the flours of sprouted wheats during 135 days of storage. Loaf volume of breads decreased during storage in both sound and sprouted flour but the mean percent decrease in loaf volume was more in stored sound flours. Aging of sprouted flour for 45 days improved the cookie and cake making properties but further storage was of no value for these baked products. Chapati making properties of stored sound and sprouted flour were inferior to that of fresh counterparts.

  20. Classification of whole wheat flour using a dimensionless number.

    Science.gov (United States)

    Sehn, Georgia Ane Raquel; Steel, Caroline Joy

    2017-11-01

    The rheological standards currently used for classifying refined wheat flour for technological quality of bread are also used for whole wheat flours. The aim of this study was to evaluate the rheological and technological behavior of different whole wheat flours, as well as pre-mixes of refined wheat flour with different replacement levels of wheat bran, to develop a dimensionless number that assigns a numerical scale using results of rheological parameters to solve this problem. Through farinograph and extensograph results, most whole wheat flours evaluated presented parameters recommended for bread making, according to the current classification. However, the specific volume of breads elaborated with these flours was not suitable, that is, the rheological analyses were not able to predict the specific volume of pan bread. The development of the Sehn-Steel dimensionless number allowed establishing a classification of whole wheat flours as "suitable" (Sehn-Steel dimensionless number between 62 and 200) or "unsuitable" for the production of pan bread (Sehn-Steel dimensionless number lower than 62). Moreover, an equation that can predict the specific volume of whole pan bread through this dimensionless number was developed.

  1. Flow-specific physical properties of coconut flours

    Science.gov (United States)

    Manikantan, Musuvadi R.; Kingsly Ambrose, Rose P.; Alavi, Sajid

    2015-10-01

    Coconut milk residue and virgin coconut oil cake are important co-products of virgin coconut oil that are used in the animal feed industry. Flour from these products has a number of potential human health benefits and can be used in different food formulations. The objective of this study was to find out the flow-specific physical properties of coconut flours at three moisture levels. Coconut milk residue flour with 4.53 to 8.18% moisture content (w.b.) had bulk density and tapped density of 317.37 to 312.65 and 371.44 to 377.23 kg m-3, respectively; the corresponding values for virgin coconut oil cake flour with 3.85 to 7.98% moisture content (wet basis) were 611.22 to 608.68 and 663.55 to 672.93 kg m-3, respectively. The compressibility index and Hausner ratio increased with moisture. The angle of repose increased with moisture and ranged from 34.12 to 36.20 and 21.07 to 23.82° for coconut milk residue flour and virgin coconut oil cake flour, respectively. The coefficient of static and rolling friction increased with moisture for all test surfaces, with the plywood offering more resistance to flow than other test surfaces. The results of this study will be helpful in designing handling, flow, and processing systems for coconut milk residue and virgin coconut oil cake flours.

  2. Effectiveness of Selected Entomopathogenic Fungi in Packed Rice Grain at Room Temperature Against Corcyra Cephalonica Stainton

    Directory of Open Access Journals (Sweden)

    Hendrawan Samodra

    2017-11-01

    Full Text Available Eight isolates of entomopathogenic fungi were evaluated as dried conidia against the rice moth,  Corcyra cephalonica. In bioassays two isolates of Beauveria bassiana (BbGc and BbPs and one isolate of Metarhizium anisopliae (MaPs consistently gave high mortality to C. cephalonica larvae. Formulations in either kaolin, talc or tapioca flour (20 % w/w a.i. thoroughly mixed with long grain rice in plastic cups (8 cm diameter by 5 cm gave complete larval mortality by the 12th day of treatment. However, in general those formulated in kaolin and talc were more efficacious and faster to kill compared to those formulated in tapioca flour or the unformulated control. Even at the lowest rate of 0.05 g BbGc in kaolin provided 100% mortality 7 days after introduction compared with other dust formulations. Isolate BbGc in kaolin and talc administered at 0.4 g a.i. in 200 g rice packed in plastic kept at room temperature provided protection against the rice moth up to 4 months of storage. Larval mortality in excess of 90% was obtained 15 days after introduction. Formulations of MaPs was effective only within the first month of storage beyond which infectivity rapidly declined.

  3. Gamma radiation influence on technological characteristics of wheat flour

    International Nuclear Information System (INIS)

    Teixeira, Christian A.H.M.; Inamura, Patricia Y.; Uehara, Vanessa B.; Mastro, Nelida L.d.

    2012-01-01

    This study aimed at determining the influence of gamma radiation on technological characteristics of wheat (Triticum sativum) flour and physical properties of pan breads made with this flour. The bread formulation included wheat flour, water, milk, salt, sugar, yeast and butter. The α-amylase activity of wheat flour irradiated with 1, 3 and 9 kGy in a Gammacell 220 (AECL), one day, five days and one month after irradiation was evaluated. Deformation force, height and weight of breads prepared with the irradiated flour were also determined. The enzymatic activity increased—reduction of falling number time—as radiation dose increased, their values being 397 s (0 kGy), 388 s (1 kGy), 343 s (3 kGy) and 293 s (9 kGy) respectively, remaining almost constant over the period of one month. Pan breads prepared with irradiated wheat flour showed increased weight. Texture analysis showed that bread made of irradiated flour presented an increase in maximum deformation force. The results indicate that wheat flour ionizing radiation processing may confer increased enzymatic activity on bread making and depending on the irradiation dose, an increase in weight, height and deformation force parameters of pan breads made of it. - Highlights: ► We study the influence of gamma radiation on wheat flour and properties of breads. ► Falling number decreased with radiation remaining almost constant up to one month. ► Ionizing radiation may confer an increase in texture parameters, weight and height on the bread.

  4. Soybean flour asthma: detection of allergens by immunoblotting

    International Nuclear Information System (INIS)

    Bush, R.K.; Schroeckenstein, D.; Meier-Davis, S.; Balmes, J.; Rempel, D.

    1988-01-01

    A 43-year-old woman developed asthma 6 years after beginning work in a food-processing plant in which soybean flour was used as a protein extender. Symptoms of sneezing, coughing, and wheezing would begin within minutes of exposure to soybean flour and resolve 2 hours after exposure ceased. Skin tests were positive to a soy extract prepared from the flour. Airway hyperreactivity was confirmed by a positive bronchial challenge to methacholine. Bronchial challenge with soybean flour produced an immediate increase in specific airway resistance from 5.0 to 22.7 L. cm of H2O/L/sec. There was no response to challenge with lactose. The patient's allergic response to soy-flour extract was further characterized by several immunologic methods. IgE binding to soy-flour protein by direct RAST was 5.98 times that of a normal control serum. The soy-flour extract was separated by dodecyl sulfate-polyacrylamide gel electrophoresis. Twenty-four protein bands were detected in the crude soy-flour extract. After immunoblotting and subsequent autoradiography, nine proteins with molecular weights ranging from 54,500 to 14,875 were found. Cross-reactivity studies with other legumes demonstrated apparent immunologic identity between a component in green pea extract and a soybean protein with a molecular weight of 17,000. The clinical significance of this cross-reactivity is not known. We conclude that in this case of occupational asthma to soybean flour, multiple allergens were involved. Immunoblotting may be useful in identifying the allergens involved in occupational asthma

  5. [Determination of aluminium in flour foods with photometric method].

    Science.gov (United States)

    Ma, Lan; Zhao, Xin; Zhou, Shuang; Yang, Dajin

    2012-05-01

    To establish a determination method for aluminium in flour foods with photometric method. After samples being treated with microwave digestion and wet digestion, aluminium in staple flour foods was determined by photometric method. There was a good linearity of the result in the range of 0.25 - 5.0 microg/ml aluminium, r = 0.9998; limit of detection (LOD) : 2.3 ng/ml; limit of quantitation (LOQ) : 7 ng/ml. This method of determining aluminium in flour foods is simple, rapid and reliable.

  6. Predatory Aptness of Ants Against Red Flour Beetle, Tribolium Castaneum Herbst (Tenebrionidae: Coleoptera) in Wheat Flour

    International Nuclear Information System (INIS)

    Shaheen, F.A.; Parveen, S.; Qadir, G.

    2016-01-01

    The red flour beetle (RFB), Tribolium castaneum is one of the most destructive pests of stored grains and other food products including wheat flour. Due to its severe infestation, the flour gets mouldy, turns yellowish, gets pungent odour and becomes unhealthy for human consumption. The infested samples of wheat flour by T. castaneum were collected from different localities and its culture was maintained in laboratory. Three ant species namely, Dorylus labiatus, Camponotus rufipes and Monomorium minimum were collected from forest and non-forest habitats and compared for their predation against different life stages of RFB. Results showed D. labiatus of forest habitat as an efficient pupal predator that consumed 91.66% pupae of RFB. It was significantly different from non-forest ant population and control with 73.33% and 11.66% pupal predation, respectively. C. rufipes from forest habitat showed maximum adult predation (25%), which was significantly higher than non-forest ant population and control jar with 15% and 3.33% adult predation, respectively. The forest population of M. minimum exhibited 56.66% larval predation that was significantly different from non-forest population with 41.66% larval consumption. Pupal stage was the highest vulnerable stage to the ant predation and was extremely predated by D. labiatus collected from forest habitats. The lowest predation was observed at larval stage by forest population of M. minimum (1.66%) that was significantly different from all the susceptible stages of RFB. These results indicate that ants could be used as biological control agents against RFB. (author)

  7. Analysis on The Substitution Ability of Mocaf Flour Toward Wheat Flour, its Business Feasibility, and its Industry Multiple Effects

    Directory of Open Access Journals (Sweden)

    Muhammad Riza Firdaus

    2017-07-01

    Full Text Available The production of mocaf flour in MSME scale in South Kalimantan area was not feasible considered from its business feasibility hence the multiple effect was unmeasured based on its industry existence. Mocaf flour production derived from cassava, which is a plant that not only match on dry land but also in the wetlands of South Kalimantan, can not be oriented consumer as a substitute for wheat flour for common food products in the society. Therefore, further research refers to aspects mocaf flour premium for health. This objective of this research was to increase the society consumption of mocaf flour for the healthy reason related to the trend on negative effect from high level of gluten in wheat flour. The laboratory test showed the result that supports mocaf product for health. With this consideration then mocaf processed product have potentials to bedeveloped though serious marketing effort is required due to infamiliarity of the mocaf flour especially in South Kalimantan area. Difference test result showed that prospects, indeed, haveintention to purchase mocaf-based processed products for healthy reason.

  8. Influence of xylanase addition on the characteristics of loaf bread prepared with white flour or whole grain wheat flour

    Directory of Open Access Journals (Sweden)

    Leandra Zafalon Jaekel

    2012-12-01

    Full Text Available The aim of this study was to verify the influence of the addition of the enzyme xylanase (four concentrations: 0, 4, 8, and 12 g.100 kg-1 flour on the characteristics of loaf bread made with white wheat flour or whole grain wheat flour. Breads made from white flour and added with xylanase had higher specific volumes than those of the control sample (no enzyme; however, the specific volume did not differ significantly (p < 0.05 among the breads with different enzyme concentrations. All formulations made from whole grain wheat flour and added with xylanase also had specific volumes significantly higher than those of the control sample, and the highest value was found for the 8 g xylanase.100 kg-1 flour formulation. With respect to moisture content, the formulations with different enzyme concentrations showed small significant differences when compared to the control samples. In general, breads made with the addition of 8 g enzyme.100 kg-1 flour had the lowest firmness values, thus presenting the best technological characteristics.

  9. Effect of Stewing in Cooking Step on Textural and Morphological Properties of Cooked Rice

    Directory of Open Access Journals (Sweden)

    E. GHASEMI

    2009-09-01

    Full Text Available Stewing of rice grains by steam after boiling in excess water can be used for cooking rice perfectly. The effects of this procedure in cooking of three varieties of Iranian rice (Sang Tarom, Domsiyah and Fajr on textural and morphological properties of cooked rice grains were investigated. The results showed that this step in rice cooking reduced the hardness and increased the adhesiveness of rice grains significantly. By the use of the scanning electron microscopy, it was shown that the outer surface of cooked rice stewed by steam had less porosity and closer pores due to the modification during cooking, and better gelatinization and more expansion of starch granules compared to non-stewed samples. The use of this procedure in rice cooking to provide a fully cooked and gelatinized, softer and stickier final product is recommended.

  10. Purification, crystallization and preliminary X-ray crystallographic analysis of rice bifunctional α-amylase/subtilisin inhibitor from Oryza sativa

    International Nuclear Information System (INIS)

    Lin, Yi-Hung; Peng, Wen-Yan; Huang, Yen-Chieh; Guan, Hong-Hsiang; Hsieh, Ying-Cheng; Liu, Ming-Yih; Chang, Tschining; Chen, Chun-Jung

    2006-01-01

    The crystallization of rice α-amylase/subtilisin bifunctional inhibitor is reported. Rice bifunctional α-amylase/subtilisin inhibitor (RASI) can inhibit both α-amylase from larvae of the red flour beetle (Tribolium castaneum) and subtilisin from Bacillus subtilis. The synthesis of RASI is up-regulated during the late milky stage in developing seeds. The 8.9 kDa molecular-weight RASI from rice has been crystallized using the hanging-drop vapour-diffusion method. According to 1.81 Å resolution X-ray diffraction data from rice RASI crystals, the crystal belongs to space group P2 1 2 1 2, with unit-cell parameters a = 79.99, b = 62.95, c = 66.70 Å. Preliminary analysis indicates two RASI molecules in an asymmetric unit with a solvent content of 44%

  11. ¬¬OPTIMASI PENGGUNAAN HIDROKOLOID TERHADAP PASTA MAKARONI BERBASIS BERAS BERAMILOSA TINGGI [Hydrocolloid Optimization on Maccaroni Pasta from High Amylose Rice

    Directory of Open Access Journals (Sweden)

    Eko Hari Purnomo

    2015-12-01

    Full Text Available Pasta is an extrusion product which is commonly produced from wheat flour. Gluten is key substance of wheat flour that affect quality of pasta, such as low cooking loss, low adhesiveness and firm pasta structure. However, gluten may cause health problem for consumers with celiac disease or gluten intolerance. Rice is safe for celiac disease sufferer, but it is technologically challenging to develop rice-based pasta. The objective of this research was to evaluate the effect of different ratio between xanthan gum and guar gum (2% on the physical characteristics of macaroni pasta from rice flour. This research consisted of several steps which include flour milling and characterization, formulation, and final product analysis. The result showed that different ratio of xanthan gum and guar gum had significant effect to cooking loss, adhesiveness, springiness and hue parameters (P0.05. The optimum formula was noodle by hydrocolloid ratio 2% of xanthan gum and 0 % of guar gum which had desirability value of 0.798. The selected formula was organoleptically accepted by panelists and containing 9.84 % of water, 1.65% of ash, 12.05% of protein, 1.41% of fat, 75.05% of carbohydrate, 24.49% of amylose, also 33.49 "μm" of pore size.

  12. Influence of Maleic Anhydride/Glycidyl Methacrylate Cografted Polylactic Acid on Properties of Wood Flour/PLA Composites

    Directory of Open Access Journals (Sweden)

    DU Jun

    2017-12-01

    Full Text Available Graft copolymers of PLA-g-MAH, PLA-g-GMA and PLA-co-MAH/GMA were prepared by means of melt grafting. The structure of the graft copolymers were characterized by FTIR.Wood flour/PLA composites were prepared by injection molding with three kinds of graft copolymers as compatibilizers, and the fractured morphology of composites was investigated by scanning electron microscope (SEM. Results show that there is no obvious phase interface between wood flour and PLA,which indicating the interfacial compatibility of wood flour/PLA composites is improved after adding different graft copolymers. The determination results of mechanical properties, processing flowability and dynamic rheological property of composites prepared with different graft copolymers reveal that, compared to the composite without compatibilizer, the tensile strength and impact strength of wood flour/PLA composites are increased by 9.54% and 7.23% respectively, and the equilibrium torque, shear heat, storage modulus and complex viscosity are all increased after adding maleic anhydride/glycidyl methacrylate cografted polylactic acid.

  13. Classification of Malaysia aromatic rice using multivariate statistical analysis

    International Nuclear Information System (INIS)

    Abdullah, A. H.; Adom, A. H.; Shakaff, A. Y. Md; Masnan, M. J.; Zakaria, A.; Rahim, N. A.; Omar, O.

    2015-01-01

    Aromatic rice (Oryza sativa L.) is considered as the best quality premium rice. The varieties are preferred by consumers because of its preference criteria such as shape, colour, distinctive aroma and flavour. The price of aromatic rice is higher than ordinary rice due to its special needed growth condition for instance specific climate and soil. Presently, the aromatic rice quality is identified by using its key elements and isotopic variables. The rice can also be classified via Gas Chromatography Mass Spectrometry (GC-MS) or human sensory panels. However, the uses of human sensory panels have significant drawbacks such as lengthy training time, and prone to fatigue as the number of sample increased and inconsistent. The GC–MS analysis techniques on the other hand, require detailed procedures, lengthy analysis and quite costly. This paper presents the application of in-house developed Electronic Nose (e-nose) to classify new aromatic rice varieties. The e-nose is used to classify the variety of aromatic rice based on the samples odour. The samples were taken from the variety of rice. The instrument utilizes multivariate statistical data analysis, including Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA) and K-Nearest Neighbours (KNN) to classify the unknown rice samples. The Leave-One-Out (LOO) validation approach is applied to evaluate the ability of KNN to perform recognition and classification of the unspecified samples. The visual observation of the PCA and LDA plots of the rice proves that the instrument was able to separate the samples into different clusters accordingly. The results of LDA and KNN with low misclassification error support the above findings and we may conclude that the e-nose is successfully applied to the classification of the aromatic rice varieties

  14. Classification of Malaysia aromatic rice using multivariate statistical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Abdullah, A. H.; Adom, A. H.; Shakaff, A. Y. Md; Masnan, M. J.; Zakaria, A.; Rahim, N. A. [School of Mechatronic Engineering, Universiti Malaysia Perlis, Kampus Pauh Putra, 02600 Arau, Perlis (Malaysia); Omar, O. [Malaysian Agriculture Research and Development Institute (MARDI), Persiaran MARDI-UPM, 43400 Serdang, Selangor (Malaysia)

    2015-05-15

    Aromatic rice (Oryza sativa L.) is considered as the best quality premium rice. The varieties are preferred by consumers because of its preference criteria such as shape, colour, distinctive aroma and flavour. The price of aromatic rice is higher than ordinary rice due to its special needed growth condition for instance specific climate and soil. Presently, the aromatic rice quality is identified by using its key elements and isotopic variables. The rice can also be classified via Gas Chromatography Mass Spectrometry (GC-MS) or human sensory panels. However, the uses of human sensory panels have significant drawbacks such as lengthy training time, and prone to fatigue as the number of sample increased and inconsistent. The GC–MS analysis techniques on the other hand, require detailed procedures, lengthy analysis and quite costly. This paper presents the application of in-house developed Electronic Nose (e-nose) to classify new aromatic rice varieties. The e-nose is used to classify the variety of aromatic rice based on the samples odour. The samples were taken from the variety of rice. The instrument utilizes multivariate statistical data analysis, including Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA) and K-Nearest Neighbours (KNN) to classify the unknown rice samples. The Leave-One-Out (LOO) validation approach is applied to evaluate the ability of KNN to perform recognition and classification of the unspecified samples. The visual observation of the PCA and LDA plots of the rice proves that the instrument was able to separate the samples into different clusters accordingly. The results of LDA and KNN with low misclassification error support the above findings and we may conclude that the e-nose is successfully applied to the classification of the aromatic rice varieties.

  15. Classification of Malaysia aromatic rice using multivariate statistical analysis

    Science.gov (United States)

    Abdullah, A. H.; Adom, A. H.; Shakaff, A. Y. Md; Masnan, M. J.; Zakaria, A.; Rahim, N. A.; Omar, O.

    2015-05-01

    Aromatic rice (Oryza sativa L.) is considered as the best quality premium rice. The varieties are preferred by consumers because of its preference criteria such as shape, colour, distinctive aroma and flavour. The price of aromatic rice is higher than ordinary rice due to its special needed growth condition for instance specific climate and soil. Presently, the aromatic rice quality is identified by using its key elements and isotopic variables. The rice can also be classified via Gas Chromatography Mass Spectrometry (GC-MS) or human sensory panels. However, the uses of human sensory panels have significant drawbacks such as lengthy training time, and prone to fatigue as the number of sample increased and inconsistent. The GC-MS analysis techniques on the other hand, require detailed procedures, lengthy analysis and quite costly. This paper presents the application of in-house developed Electronic Nose (e-nose) to classify new aromatic rice varieties. The e-nose is used to classify the variety of aromatic rice based on the samples odour. The samples were taken from the variety of rice. The instrument utilizes multivariate statistical data analysis, including Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA) and K-Nearest Neighbours (KNN) to classify the unknown rice samples. The Leave-One-Out (LOO) validation approach is applied to evaluate the ability of KNN to perform recognition and classification of the unspecified samples. The visual observation of the PCA and LDA plots of the rice proves that the instrument was able to separate the samples into different clusters accordingly. The results of LDA and KNN with low misclassification error support the above findings and we may conclude that the e-nose is successfully applied to the classification of the aromatic rice varieties.

  16. Determination of trace elements in Brazilian rice grains and in biological reference materials by neutron activation analysis

    International Nuclear Information System (INIS)

    Maihara, V.A.; Vasconcellos, M.B.A.

    1989-01-01

    Instrumental neutron activation analysis was applied to the determination of the elements Na, K, Br, As, Rb, Zn, Co, Fe and Sc in Brazilian rice samples and in biological standards. Hg and Se concentrations were determined by using a simple radiochemical separation. The chemical procedure was carried out by means of distillation of Hg and Se in HBr medium and subsequent precipitation of selenium by sodium methabissulfide and mercury by thioacetamide. The accuracy of the instrumental and radiochemical methods was evaluated by means of analysis of the Reference Materials NBS-Bovine Liver, Bowen's Kale and NBS-Rice Flour. (author) [pt

  17. Determination of trace elements in Brazilian rice grains and in biological reference materials by neutron activation analysis

    International Nuclear Information System (INIS)

    Maihara, V.A.; Vasconcellos, M.B.A.

    1989-01-01

    INAA was applied to the determination of the elements Na, K, Br, As, Rb, Zn, Co, Fe and Sc in Brazilian rice samples and in biological standards. Hg and Se concentrations were determined using a simple radiochemical separation. The chemical procedure was carried out by means of distillation of Hg and Se in HBr medium and subsequent precipitation of Se by sodium metabisulfite and Hg by thioacetamide. The accuracy of the instrumental and radiochemical methods was evaluated by means of analysis of the Reference Materials NBS-Bovine Liver, Bowen's Kale and NBS-Rice Flour. (author) 15 refs.; 5 tabs

  18. THE COMPARISON OF QUALITY AND CHEMICAL COMPOSITION OF BREADS BAKED WITH RESIDUAL AND COMMERCIAL OAT FLOURS AND WHEAT FLOUR

    OpenAIRE

    Dorota Litwinek; Halina Gambuś; Gabriela Zięć; Renata Sabat; Anna Wywrocka-Gurgul; Wiktor Berski

    2013-01-01

    The aim of the present work was to compare the quality and nutritional value of breads with 50% addition of oat flours of different origin (commercial and residual – a by-product obtained during production of β-glucan preparation) to standard wheat bread. Commercial wheat and oat flours and residual oat flour, as well as wheat and 50/50% wheat/oat breads were used as material in this research. Quality of breads was evaluated by their volume, baking yield and total baking loss. Bread crumb tex...

  19. Genetically modified rice Bt-Shanyou63 expressing Cry1Ab/c protein does not harm Daphnia magna.

    Science.gov (United States)

    Zhang, Li; Guo, Ruqing; Fang, Zhixiang; Liu, Biao

    2016-10-01

    The genetically modified (GM) rice Bt-ShanYou63 (Bt-SY63) received an official biosafety certificate while its safety remained in dispute. In a lifelong study, Daphnia magna were experimentally fed a basal diet of rice flours from Bt-SY63 or its parental rice ShanYou63 (SY63) at concentrations of 0.2mg, 0.3mg, or 0.4mgC (per individual per day). Overall the survival, body size, and reproduction of the animals were comparable between Bt-SY63 and ShanYou63.. The results showed that no significant differences were observed in growth and reproduction parameters between D. magna fed GM and non-GM flour and no dose-related changes occurred in all the values. Based on the different parameters assessed, the GM rice Bt-SY63 is a safe food source for D. magna that does not differ in quality from non-GM rice. Copyright © 2016. Published by Elsevier Inc.

  20. Cheese bread enriched with biofortified cowpea flour

    Directory of Open Access Journals (Sweden)

    Rodrigo Barbosa Monteiro Cavalcante

    2016-02-01

    Full Text Available ABSTRACT The development and enrichment of food are of great importance not only for the industry but also to improve the population's nutrition, where you can create new products or optimize existing ones. The consumption of fortified products in the diet is an option for the control of deficiency diseases. This study aimed to develop enriched cheese bread with whole biofortified cowpea flour and evaluate their acceptance and chemical composition. Two formulations, F1 and F2, were prepared containing 5.6 and 8% of cowpea flour as a substitute for starch, respectively. To check acceptance, three sensory tests were used (Hedonic Scale, Purchase Intent, and Paired Comparison, F1 being sensory viable according to assessors, being chemically analyzed. Minerals were determined by atomic emission spectrometry with inductively coupled plasma source. The moisture was determined by drying at 105 °C, ash by calcination in muffle at 550 °C, proteins by the macro-Kjeldahl method, and lipids by hot extraction in a Soxhlet extractor. Carbohydrates were obtained by difference and the calories were calculated. The addition of cowpea increased the amounts of copper, iron, phosphorus, magnesium, manganese, and zinc, as well as protein and carbohydrate values. On the other hand, there was a reduction of the moisture concerning lipids and the total caloric value compared to the standard formulation. It was concluded , therefore, that the cowpea, a regional raw material in market expansion is presented as an option for the enrichment of baked foods that do not contain gluten, such as cheese bread.

  1. effect of cassava flour processing methods and substitution level

    African Journals Online (AJOL)

    MASAMBA

    the diet. Incorporation of different proportions of flours from cereals and legumes in baked ... desirability of the sensory attributes under consideration. 2193 ... Package for Social Scientists (SPSS) for windows version 12.0 and index to volume.

  2. The effect of apricot kernel flour incorporation on the ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-01-05

    Jan 5, 2009 ... 2Department of Food Engineering, Erciyes University 38039, Kayseri, Turkey. Accepted 27 ... Key words: Noodle; apricot kernel, flour, cooking, sensory properties. ... their simple preparation requirement, desirable sensory.

  3. The performance of cassava flour as a water reducing admixture

    African Journals Online (AJOL)

    CHINYERE

    were then ground to a fine texture in a mill and the flour obtained sieved ... Figure 1: Effect of Water/cement Ratio Upon Slump and Compacting Factor. Saturated Density ... attributed to the bleeding and segregation observed in these mixes.

  4. Biofortification of maize flour with grain amaranth for improved nutrition

    African Journals Online (AJOL)

    Biofortification of maize flour with grain amaranth for improved nutrition. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE ... African Journal of Food, Agriculture, Nutrition and Development. Journal Home ...

  5. THE USE OF Orbignya speciosa FLOUR IN PLYWOOD ADHESIVE MIX

    Directory of Open Access Journals (Sweden)

    Vanessa Coelho Almeida

    2014-03-01

    Full Text Available http://dx.doi.org/10.5902/1980509813340The aim of this study was to evaluate the effect of the addition of babaçu flour on urea-formaldehyde adhesive properties and compare it to the adhesives produced with wheat flour, which is the extender usually used for plywood production. An amount of 0, 10, 20 and 30 parts of extender per weight of the adhesive were added. Ammonium sulfate was used as catalyst, in the proportion of 1.5% on dry weight of solid content. The following properties of the adhesive were determined: viscosity, nonvolatile content, gel time, working life and pH. The babaçu flour presented similar properties to wheat flour. Both, in general, although contributed to the increase of the adhesives viscosity, reduced its reactivity, as increased pH value, gel time and working life.

  6. INFLUENCE OF FOUR CEREAL FLOURS ON THE GROWTH OF ...

    African Journals Online (AJOL)

    Timothy Ademakinwa

    Department of Biology, Food Storage Technology Programme, Federal University of ... Host preference (choice and no-choice) studies revealed millet flour as the most preferred food ... cadavers thus reducing the palatability, rheological.

  7. Molecular genetic analysis of grain protein content and flour ...

    Indian Academy of Sciences (India)

    1Tai'an Academy of Agricultural Science, Tai'an 271000, People's Republic of China ... (GPC) and flour whiteness degree (FWD) are important qualitative traits in common wheat. ... The objectives of present study were to identify QTLs con-.

  8. Toxic effects of chlorinated cake flour in rats.

    Science.gov (United States)

    Cunningham, H M; Lawrence, G A; Tryphonas, L

    1977-05-01

    Four experiments were conducted using weanling Wistar rats to determine whether chlorinated cake flour or its constituents were toxic. Levels of 0.2 and 1.0% chlorine added to unbleached cake flour significantly (p less than 0.01) reduced growth rate by 20.7 and 85.2% and increased liver weight relative to body weight by 16.7 and 25.3%, respectively. Lipids extracted from flour chlorinated at the same levels had similar effects. Rat chow diets containing 0.2 and 0.6% chlorine in the form of chlorinated wheat gluten reduced growth rate and increased liver weight as a percentage of body weight. A rat chow diet containing 0.2% chlorine as chlorinated flour lipids increased absolute liver weight by 40%, kidney by 20%, and heart by 10% compared to pair-fed controls.

  9. Seed treatments affect functional and antinutritional properties of amaranth flours

    NARCIS (Netherlands)

    Gamel, T.H.; Linssen, J.P.H.; Mesallam, A.S.; Damir, A.A.; Shekib, L.A.

    2006-01-01

    The effects of seed treatments, including cooking, popping germination and flour air classification, on the functional properties and antinutritional factors of Amaranthus caudatus and Amaranthus cruentus seeds were studied. Thermal treatments increased the water absorption with a maximum value of

  10. Response of Chloroplast NAD(PH Dehydrogenase-Mediated Cyclic Electron Flow to a Shortage or Lack in Ferredoxin-Quinone Oxidoreductase-Dependent Pathway in Rice Following Short-Term Heat Stress

    Directory of Open Access Journals (Sweden)

    Jemaa eEssemine

    2016-03-01

    Full Text Available Cyclic electron flow around PSI can protect photosynthetic electron carriers under conditions of stromal over-reduction. The goal of the research reported in this paper was to investigate the responses of both PSI and PSII to a short-term heat stress in two rice lines with different capacities of cyclic electron transfer, i.e. Q4149 with a high capacity (hcef and C4023 with a low capacity (lcef. The absorbance change at 820 nm (ΔA820 was used here to assess the charge separation in the photosystem I (PSI reaction center (P700. The results obtained show that short-term heat stress abolishes the FQR-dependent CEF in rice and accelerates the initial rate of P700+ re-reduction. The P700+ amplitude was slightly increased at a moderate heat-stress (35°C because of a partial restriction of FQR but it was decreased following high heat-stress (42°C. Assessment of PSI and PSII activities shows that PSI is more susceptible to heat stress than photosystem II (PSII. Under high temperature, FQR-dependent CEF was completely removed and NDH-dependent CEF was up-regulated and strengthened to a higher extent in C4023 than in Q4149. Specifically, under normal growth temperature, hcef (Q4149 was characterized by higher FQR- and NDH-dependent CEF rates than lcef (C4023. Following thermal stress, the activation of NDH-pathway was 130% and 10% for C4023 and Q4149, respectively. Thus, the NDH-dependent CEF may constitute the second layer of plant protection and defence against heat stress after the main route, i.e. FQR-dependent CEF, reaches its capacity. We discuss the possibility that under high heat stress, the NDH pathway serves as a safety valve to dissipate excess energy by cyclic photophosphorylation and overcome the stroma over-reduction following inhibition of CO2 assimilation and any shortage or lack in the FQR pathway. The potential role of the NDH-dependent pathway during the evolution of C4 photosynthesis is briefly discussed.

  11. Thermal inactivation of eight Salmonella serotypes on dry corn flour.

    OpenAIRE

    VanCauwenberge, J E; Bothast, R J; Kwolek, W F

    1981-01-01

    Dry heat was used to inactivate Salmonella newington, Salmonella typhimurium, Salmonella anatum, Salmonella kentucky, Salmonella cubana, Salmonella seftenberg, Salmonella thompson, and Salmonella tennessee in corn flour at 10 and 15% moisture. The flour was spray inoculated at 10(5) Salmonella cells per g and then stored at 49 degrees C (120 degrees F); viable Salmonella cells were counted on Trypticase (BBL Microbiology Systems) soy agar plates every 30 min for the first 4 h and then at 4-h ...

  12. Protein extractability from defatted Moringa oleifera lam. seeds flour ...

    African Journals Online (AJOL)

    Protein extractability from defatted Moringa oleifera seed flour was studied under various conditions of pH (2-10), time (5-60 minutes), salts (NaCl and CaCl ), salt concentrations (0-2 M) and solvent to flour ratio (10:1-30:1). 2 Results showed that protein extractability was dependent on pH, type of salt, salt concentrations and ...

  13. Shelf life characteristics of bread produced from ozonated wheat flour.

    Science.gov (United States)

    Obadi, Mohammed; Zhu, Ke-Xue; Peng, Wei; Sulieman, Abdellatif A; Mahdi, Amer Ali; Mohammed, Khalid; Zhou, Hui-Ming

    2017-11-13

    The objective of this work was to study the effect of ozone treatment on the quality of bread and its shelf life. Flour was treated with ozone gas a rate of 5 L/min for 5, 15, 25, 35, and 45 min. Baking studies showed that bread made from flour treated with ozone for 15 min exhibited improved quality properties (in terms of specific volume, bread color, and crumb cell numbers). Exposure to ozone for shorter times did not cause obvious changes in the major volatile compounds of bread. A shelf life tests showed that ozone gas treatment influenced the extent of starch crystallinity. The relative starch crystallinity of bread made from flour treated with ozone for 15 min was lower than the control value, as were the hardness, springiness, and cohesiveness. Microscopic examination of crumb structure revealed remarkable differences between control and treated breads. Although ozone is a naturally occurring substance found in the atmosphere, ozone can also be produced synthetically. Recently, ozone has come to be regarded as a new treatment for flour. Especially in countries where the chlorination is forbidden, ozone treatment may be of a great interest if it were associated with significant and reliable changes in flour. Ozone treatment of wheat flour tends to improve bread shelf life and quality in terms of physiochemical, baking properties, X-ray diffraction data, volatile compound levels, crumb structure, and textural characteristics. Given such findings, desirable shelf life and bread qualities may be achieved when ozone is used as a flour oxidant prior to bread baking. Analyses of the effects of ozone gas on treatment of flour on bread shelf life and quality would aid the production of high quality and extend the shelf life of bread. © 2017 Wiley Periodicals, Inc.

  14. Comparing Soy Flour Wood Adhesives to Purified Soy Protein Adhesives

    Science.gov (United States)

    Charles R. Frihart; Linda F. Lorenz

    2013-01-01

    While economics dictate that soy-based wood adhesives be made with soy flour, much of the recent literature on soy-based wood adhesives has involved using soy protein isolate. The obvious assumption is that the additional carbohydrates in the flour but not in the isolate only serve as inert diluents. Our studies have shown that the isolate can provide 10 times the wet...

  15. Asymmetric Price Transmission in Indonesia's Wheat Flour Market

    OpenAIRE

    Varela, Gonzalo J.; Taniguchi, Kiyoshi

    2014-01-01

    Data indicate that its domestic price in Indonesia has been increasing regardless of movements in the international price of wheat. A test for asymmetric price transmission from international wheat to domestic wheat flour markets is conducted using an error correction model and find the presence of asymmetric price transmission. The upward adjustment in the domestic price of wheat flour is much faster than its adjustment downward when it deviates from long-run equilibrium. Our results are rob...

  16. Aceitabilidade de biscoitos e bolos à base de arroz com café extrusados Acceptability of biscuits and rice and extruded coffee-based cakes

    Directory of Open Access Journals (Sweden)

    Reginaldo Ferreira da Silva

    2009-12-01

    Full Text Available O objetivo deste trabalho foi avaliar a granulometria de farinha do trigo e de farinhas pré-cozidas por extrusão obtidas da mistura de arroz com pó de café (15 e 20%, bem como a aceitabilidade de biscoitos e bolos elaborados a partir da adição de 20 e 30% da farinha pré-cozida na mistura da massa (trigo. Os resultados obtidos mostraram que as farinhas extrusadas apresentaram maior granulometria que a farinha de trigo; à medida que se aumentou o percentual de farinha pré-cozida na mistura com o trigo, também aumentou a granulometria. Não houve diferença significativa entre as amostras tratadas com 15 e 20% de farinha pré-cozida quanto à preferência sensorial de aroma, textura, sabor e impressão global avaliados em bolos. Entretanto, os biscoitos elaborados com a farinha pré-cozida com 15% de pó de café na mistura com arroz apresentaram maior preferência para aroma e textura ao serem comparados com aqueles com 20%; a farinha pré-cozida de pó de café com arroz pode ser utilizada como ingrediente na mistura de bolos, biscoitos e outros produtos alimentícios em até 30%.The objective of this study was to evaluate the granulometry of wheat flour and flour precooked by extrusion obtained from the mixture of rice and coffee (15 and 20%, as well as the acceptability of biscuits and cakes prepared with 20 and 30% of precooked flour in the mixture of the dough (wheat. The results obtained show that the extruded flours presented thicker granulometry than the wheat flour. Granulometry increased with the increase of the content of precooked flour in the mixture with wheat. There were no significant differences among the samples treated with 15 and 20% of precooked flour as to the sensorial preference of aroma, texture, flavor, and global impression. However, the biscuits made with precooked flour with 15% of coffee in the mixture with rice presented greater preference of aroma and texture if compared with those with 20%. It can be said

  17. Navy Bean Flour Particle Size and Protein Content Affect Cake Baking and Batter Quality(1).

    Science.gov (United States)

    Singh, Mukti; Byars, Jeffrey A; Liu, Sean X

    2015-06-01

    Whole navy bean flour and its fine and coarse particle size fractions were used to completely replace wheat flour in cakes. Replacement of wheat flour with whole bean flour significantly increased the protein content. The protein content was adjusted to 3 levels with navy bean starch. The effect of navy bean flour and its fractions at 3 levels of protein on cake batter rheology and cake quality was studied and compared with wheat flour samples. Batters prepared from navy bean flour and its fractions had higher viscosity than the cake flour. Reducing the protein content by addition of starch significantly lowered the viscosity of cake batters. The whole navy bean flour and coarse bean fraction cakes were softer than cakes made with wheat flour but had reduced springiness. Principal component analysis showed a clear discrimination of cakes according to protein. It also showed that low protein navy bean flour cakes were similar to wheat flour cakes. Navy bean flour with protein content adjusted to the level of cake (wheat) flour has potential as a healthy alternative in gluten-free cakes. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  18. Thermoplastic starch materials prepared from rice starch

    International Nuclear Information System (INIS)

    Pontes, Barbara R.B.; Curvelo, Antonio A.S.

    2009-01-01

    Rice starch is a source still little studied for the preparation of thermoplastic materials. However, its characteristics, such as the presence of proteins, fats and fibers may turn into thermoplastics with a better performance. The present study intends the evaluation of the viability of making starch thermoplastic from rice starch and glycerol as plasticizer. The results of X-ray diffraction and scanning electronic microscopy demonstrate the thermoplastic acquisition. The increase of plasticizer content brings on more hydrophilic thermoplastics with less resistance to tension and elongation at break. (author)

  19. Process development and economic evaluation of recombinant human lactoferrin expressed in rice grain.

    Science.gov (United States)

    Nandi, Somen; Yalda, Dorice; Lu, Stephen; Nikolov, Zivko; Misaki, Ryo; Fujiyama, Kazuhito; Huang, Ning

    2005-06-01

    In this paper, we show that recombinant human lactoferrin (rhLF) has been stably expressed at 0.5% brown rice flour weight for nine generations. Process development indicates that rhLF can be efficiently extracted from rice flour in 20 mM phosphate buffer (pH 7.0) containing up to 0.5 M NaCl and at a ratio of 1 kg flour to 10 L buffer. After solid/liquid separation, the extract can then be loaded directly onto an ion-exchange column and rhLF can be eluted using 0.8 M NaCl. The resulting rhLF is about 95% pure. A range of biochemical and biophysical analyses were carried out and results indicated that the purified rhLF was identical to its native human counterpart other than its glycosylation. Economic analysis shows that at 600 kg/year scale, the cash cost to produce 1 g of rhLF of pharmaceutical grade is US$ 5.90. Analysis also indicates that the expression level has profound impact on costs related to planting, milling, extraction and purification, thus high level expression of recombinant protein in plants is one of the key parameters for the success of plant made pharmaceuticals.

  20. Mycopopulations of grain and flour of wheat, corn and buckwheat

    Directory of Open Access Journals (Sweden)

    Plavšić Dragana V.

    2017-01-01

    Full Text Available According to the nutritive characteristics, whole grain flour is a high quality product, due to its high vitamin, mineral, and dietary fiber content. However, the cereal grains are susceptible to the series of contamination during the ripening, harvesting, processing and storage. The aim of this work was to determine mold presence in grains and flour of wheat, corn and buckwheat. The determination of total number and identification of isolated genera and species of molds were the subject of this research. All samples were contaminated with the molds. The total number of molds per 100 cereal grains was between 60 cfu (wheat and 120 cfu (buckwheat. The total number of molds in the samples of flour ranged from 6.0x101 cfu/g in white wheat flour to 5.0 x102 cfu/g in buckwheat whole grain flour (DG18 medium. Eight fungal genera (Alternaria, Aspergillus, Cladosporium, Chrysonilia, Fusarium, Penicillium, Rhizopus and Scopulariopsis and fifteen species were isolated. The largest number of species of molds was isolated from the genus Aspergillus. About 66.7% of isolated fungi belonged to potentially toxigenic species. The results pointed out the necessity of grain surface treatment, preceding the milling of grains in wheat, corn and whole grain buckwheat flour production.

  1. Maize flour fortification in Africa: markets, feasibility, coverage, and costs.

    Science.gov (United States)

    Fiedler, John L; Afidra, Ronald; Mugambi, Gladys; Tehinse, John; Kabaghe, Gladys; Zulu, Rodah; Lividini, Keith; Smitz, Marc-Francois; Jallier, Vincent; Guyondet, Christophe; Bermudez, Odilia

    2014-04-01

    The economic feasibility of maize flour and maize meal fortification in Kenya, Uganda, and Zambia is assessed using information about the maize milling industry, households' purchases and consumption levels of maize flour, and the incremental cost and estimated price impacts of fortification. Premix costs comprise the overwhelming share of incremental fortification costs and vary by 50% in Kenya and by more than 100% across the three countries. The estimated incremental cost of maize flour fortification per metric ton varies from $3.19 in Zambia to $4.41 in Uganda. Assuming all incremental costs are passed onto the consumer, fortification in Zambia would result in at most a 0.9% increase in the price of maize flour, and would increase annual outlays of the average maize flour-consuming household by 0.2%. The increases for Kenyans and Ugandans would be even less. Although the coverage of maize flour fortification is not likely to be as high as some advocates have predicted, fortification is economically feasible, and would reduce deficiencies of multiple micronutrients, which are significant public health problems in each of these countries. © 2013 New York Academy of Sciences.

  2. BIOFILMS BASED ON CANIHUA FLOUR (Chenopodium Pallidicaule: DESIGN AND CHARACTERIZATION

    Directory of Open Access Journals (Sweden)

    Lady M. Salas-Valero

    2015-01-01

    Full Text Available This work aims to (1 produce and characterize the flour obtained from two varieties of canihua, cupi and illpa-inia, and (2 evaluate the ability of these flours to form biofilms. The flours produced contain proteins, starches, lipids, organic substances containing phenol groups, and high percentages of unsaturated fatty acids. Films produced from the illpa variety presented lower water vapor permeability and larger Young’s modulus values than the films formed from the cupi variety. Both films were yellowish and displayed a high light blocking ability (as compared with polyethylene films, which can be attributed to the presence of phenolic compounds. Furthermore, they showed lesser solubility and water permeability than other polysaccharide films, which may be the result of the higher protein (12%–13.8% and lipid (11% contents in canihua flours, as well as the formation of a larger number of S–S bonds. On the other hand, these films presented a single vitreous transition temperature at low temperatures (< 0 °C, crystallization of the A and Vh types, and an additional diffraction peak at 2 = 7.5º, ascribed to the presence of essential fatty acids in canihua flour. Canihua flour can form films with adequate properties and shows promise for potential applications in food packaging, because it acts as a good barrier to incident ultraviolet light.

  3. Rice (Oryza) hemoglobins

    Science.gov (United States)

    Hemoglobins (Hbs) corresponding to non-symbiotic (nsHb) and truncated (tHb) Hbs have been identified in rice (Oryza). This review discusses the major findings from the current studies on rice Hbs. At the molecular level, a family of the nshb genes, consisting of hb1, hb2, hb3, hb4 and hb5, and a sin...

  4. THE COMPARISON OF QUALITY AND CHEMICAL COMPOSITION OF BREADS BAKED WITH RESIDUAL AND COMMERCIAL OAT FLOURS AND WHEAT FLOUR

    Directory of Open Access Journals (Sweden)

    Dorota Litwinek

    2013-02-01

    Full Text Available The aim of the present work was to compare the quality and nutritional value of breads with 50% addition of oat flours of different origin (commercial and residual – a by-product obtained during production of β-glucan preparation to standard wheat bread. Commercial wheat and oat flours and residual oat flour, as well as wheat and 50/50% wheat/oat breads were used as material in this research. Quality of breads was evaluated by their volume, baking yield and total baking loss. Bread crumb texture profile was analyzed by texture analyzer TA.XT Plus. Organoleptic assesment was performed by 15 skilled pearson‘s panel. Moreover both in flours and breads protein, lipids, mineral compounds, dietary fiber (soluble and insoluble fraction and β-glucans content were analyzed by AOAC methods.

  5. Community-wise evaluation of rice beer prepared by some ethnic tribes of Tripura

    Directory of Open Access Journals (Sweden)

    Sushanta Ghosh

    2016-12-01

    Full Text Available Tripura is inhabited by many indigenous communities having unique ethno-socio-cultural lifestyle with age-old rice beer brewing techniques using wild herbs and local rice varieties popularly known as chuwak or zu. The present study is focused on comparative evaluation of brewing methods and nutritional aspects of rice beer among Debbarma, Jamatia, Koloi, and Molsom tribes of Tripura. Sample ingredients and plant species are properly identified before reporting. Rice beer is also prepared in laboratory conditions for comparative studies of qualitative and quantitative aspects. Thirteen different plant species are used by these four tribes for preparation of starter cultures using soaked rice flour. Markhamia stipulate (Wall. Seem. is common to all communities for starter cake preparation. Litsea monopetala (Roxb. Pers. is used by all three communities except Jamatia. The use of Ananus comosus Mill. is common among Debbarma and Jamatia tribes, whereas that of Artocarpus heterophyllus Lam. is common among Molsom and Koloi tribes. However, Aporusa diocia (Roxb. Muell., Combretum indicum (L. DeFilipps., and Citrus sinensis (L. Osbeck. are used only by Debbarma tribe for unique tangy flavor. The physicochemical properties of rice beer varied within tribes for its moisture content, carbohydrate content, reducing sugar, and alcohol percentage. The concentration of alcohol increases with aging and prolonged fermentation. The plants reported here are also reported for having nutritional and medicinal benefits for the metabolic stability in humans, which make the process more prospective for commercialization if a standard for maintaining a quality and associated risk can be determined.

  6. Dietary safety assessment of genetically modified rice EH rich in β-carotene.

    Science.gov (United States)

    Wu, Yangyang; Xu, Yan; Du, Yanan; Zhao, Xiao; Hu, Ruili; Fan, Xiaorui; Ren, Fangfang; Yao, Quanhong; Peng, Rihe; Tang, Xueming; Zhao, Kai

    2017-08-01

    This 90-day study aimed to assess the dietary safety of transgenic rice EH which is rich in β-carotene. Two experimental groups of Sprague-Dawley rats were fed diets containing 45% rice flour of Zhonghua 11 rice and transgenic rice EH rich in β-carotene, respectively. The reference group was fed a diet containing standard feed nutrition. During the trial period, each rat was weighed and the food intake was recorded twice a week. Their behaviors were observed daily. In the end, blood samples were obtained from all anesthetized rats to measure the hematologic and serum chemistry indicators. Growth performance, anatomy and pathology of all organs in each group were analyzed. Although a few parameters were found to be statistically significantly different across groups, they were within the normal reference range for this breed and age of rats. Therefore, the changes were not considered to be diet related. The results revealed that the transgenic rice EH rich in β-carotene was as nutritious as Zhonghua 11 rice and showed a lack of biologically meaningful unintended effects. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Effect of whole wheat flour on the quality, texture profile, and oxidation stability of instant fried noodles.

    Science.gov (United States)

    Cao, Xinlei; Zhou, Sumei; Yi, Cuiping; Wang, Li; Qian, Haifeng; Zhang, Hui; Qi, Xiguang

    2017-12-01

    The effects of whole wheat flour (WWF) on pasting properties of instant fried noodle dry mix and quality of final product were investigated in this research. Refined wheat flour in the recipe for instant-fried noodle was replaced by WWF at different levels. The peak and final viscosities were significantly and negatively correlated to WWF substitution level. With increasing WWF level, the hardness, cohesiveness, adhesiveness, and resilience values of instant fried noodles decreased by 11.63, 16.23, 16.67, 20.00%, respectively. WWF darkened noodle's surface color and increased its oil content (26.63%). A porous and less uniformed structure of the WWF instant fried noodles was observed by a scanning electron microscope. Moreover, the WWF incorporation lowered peroxide values of the instant fried noodles during storage. In conclusion, even though the oil content increased, WWF was helpful to inhibit the oil oxidation and produce instant fried noodles with softer texture and less sticky surface. Refined wheat flour in the recipe for instant-fried noodle was replaced by whole wheat flour (WWF), which is rich in dietary fibers, vitamins, and other bioactive compounds. The addition of WWF delayed the retrogradation tendency of starch in the dry mix. WWF-added instant noodles had softer texture, less sticky surface, and lower peroxide value. Based on the results of this study, the refined wheat flour in the recipe for instant-fried noodle could be partially replaced by WWF to make noodles with better texture profile and higher consumer acceptance. © 2017 Wiley Periodicals, Inc.

  8. PENAMBAHAN TEPUNG PORANG PADA PEMBUATAN MI DENGAN SUBSTITUSI TEPUNG MOCAF (Modified cassava FLOUR [Addition of Porang Flour in Noodle as Mocaf Substitution (Modified cassava Flour

    Directory of Open Access Journals (Sweden)

    Anni Faridah*

    2014-06-01

    Full Text Available Noodle is one of the staple foods that are widely consumed and preferred by the Asian. However, wet noodles with modified cassava flour (mocaf substitution resulted in lower quality compared to 100% wheat noodle. Addition of a certain amount of konjac glucomannan (Amorphophallus oncophyllus flour to wet noodle is strongly recommended due to the fact that the food additive has a health benefit. Porang or konjac flour, which was used in the research, has soluble fiber properties, low calorie content, and highly viscous. It forms a heat stable gel with a mild alkali, interacts with starch, and has a synergistic interaction with kappa carrageenan. In this research, konjac flour was added to study the optimum combination between konjac and water. As much as 2, 4 and 6% (w/w of konjac flour were combined with 35, 40, 45% (v/w of water. The results showed that treatments with combinations of konjac flour and water were significantly contributing to characteristics of cooking time, cooking loss, color brightness index, tensile strength, swelling volume and water absorption. The best treatment was at a combination of 4% konjac (w/w and 35% water (v/w. The best porang noodles have the characteristics of cooking time at 2.13 minutes, cooking loss of 35%, tensile strength of 0.14 N, water absorption of 201.58%, color brightness index of 51.41, swelling volume of 103.63%, moisture content of 31.77%, protein content of 5.87%, fat content of 2.13%, ash content of 0.85% and crude dietary fiber of 4.58%.

  9. Study on the Formulation of Squid (Loligosp) Nugget Added with Yellow Pumpkin (Curcubitamoschata) Flour

    OpenAIRE

    Nurharyati, Lisa; ', Suparmi; Sari, N Ira

    2017-01-01

    This study aimed to determine the squid nugget formulation with the addition of pumpkin flour. It was evaluated for the organoleptic value and the proximate composition. The method used was an experimental method and designed as non-factorial completely randomized design (CRD). The treatments were addition of pumpkin flour into the mix, consisting of four levels, namely: N0 (without the addition of pumpkin flour), N1 (pumpkin flour 50 g), N2 (pumpkin flour 75 g) and N3 (pumpkin flour 100 g).B...

  10. Upgrading of shamy wheat bread quality through supplement with flour of certain gamma irradiated legumes

    International Nuclear Information System (INIS)

    Nassef, A.E.

    1997-01-01

    Soybean flour,chick peas flour and lupines were irradiated at 0,5 and 10 kGy and individually used to replace 5,10 or 15% of wheat flour in shamy bread. The effect of supplementation of wheat flour with these legume flours on the major, chemical composition and nutritional quality of bread was studied. Results indicated that protein, ash and fiber contents of supplemented shamy bread were higher than the control. On the other hand, the amino acids of the shamy wheat bread supplemented irradiated legumes flour, improved the quality (water retention capacity, stailing rate and bread freshness) of bread

  11. Effect of incorporation of plantain and chickpea flours on the quality characteristics of biscuits

    OpenAIRE

    Yadav, Ritika B.; Yadav, Baljeet S.; Dhull, Nisha

    2011-01-01

    Blends of plantain and chickpea flours each with concentrations of 0, 10, 20, 30 and 40% along with of refined wheat flour were used for development of biscuits. The flours were evaluated for their chemical and functional properties. Plantain flour had highest crude fiber (3.6%) and carbohydrate content (80.8%), whereas chickpea flour had highest protein content (19.3%) and fat content (4.4%). Plantain flour showed highest water absorption (167.7%) whereas lowest oil absorption capacity (144....

  12. Effect of Different Flours on the Formation of Hydroxymethylfurfural, Furfural, and Dicarbonyl Compounds in Heated Glucose/Flour Systems

    Directory of Open Access Journals (Sweden)

    Marta Mesías

    2017-02-01

    Full Text Available Traditional cereal-based foods usually include wheat flour in their formulations; however, the search for new products with new ingredients providing different properties to foods is widely pursued by food companies. Replacement of wheat by other flours can modify both nutritional properties and organoleptic characteristics of the final baked food, but can also impact the formation of potentially harmful compounds. The effect of the type of flour on the formation of furfurals and dicarbonyl compounds was studied in a dough model system during baking that contains water or glucose in order to promote the Maillard reaction and caramelization. The formation of methylglyoxal and glyoxal was significantly reduced in spelt and teff formulations compared to wheat flour formulations, respectively. In contrast, samples formulated with oat, teff, and rye showed a significant increase in the levels of 3-deoxyglucosone. Similarly, spelt and teff formulations presented significantly higher concentrations of hydroxymethylfurfural, and spelt, teff, and rye presented higher concentrations of furfural. Therefore, the formation of process contaminants and undesirable compounds in new food products formulated with different flours replacing the traditional wheat flour should be considered carefully in terms of food safety.

  13. Use of Gamma Irradiation for the Control of the Red Flour Beetle (Tribolium castaneum Hrbst) in Bread Flour

    International Nuclear Information System (INIS)

    Kabbashi, E.E.B.M.; Ahmed, E.G.H.; Aljack, S.A.; Hamad, S.A.A.; Ahmed, M.E.; Elmamoun, K.

    2012-01-01

    Three doses of gamma irradiation (viz. 2, 2.5 and 3 KGy) were tested against the red flour beetle (Tribolium castaneum Hrbst) in bread flour in Khartoum, Sudan. Corresponding control exhibited two groups of infested and uninfested flours. The results obtained showed that all the doses used reduced the infestation in a range 46-100 % during a six month storage period. The 2 KGy mortality range, of the test insect, was 46 - 100%, whereas the corresponding readings for 2.5 KGy and 3 KGy were 90 - 100% and total kill (100%), respectively. However, a natural infestation occurred in all the treated flours and in the infested and uninfested controls as well. This may refer to the resistant eggs of this insect whose a smaller size than the major bulk flour particles and therefore not affected by the milling process and the irradiation doses used too.The treatment mortality in this test was corrected by the Abbott's formula. Moreover, the flour analyses results implied that all the chemical parameters (moisture %, ash % and protein %) and the quality parameters (wet gluten and falling number) are within the recommended levels of the Codex Alimentarius.It was also found that these doses used had no harmful effect on dough rheological properties.

  14. Effect of Different Flours on the Formation of Hydroxymethylfurfural, Furfural, and Dicarbonyl Compounds in Heated Glucose/Flour Systems.

    Science.gov (United States)

    Mesías, Marta; Morales, Francisco J

    2017-02-16

    Traditional cereal-based foods usually include wheat flour in their formulations; however, the search for new products with new ingredients providing different properties to foods is widely pursued by food companies. Replacement of wheat by other flours can modify both nutritional properties and organoleptic characteristics of the final baked food, but can also impact the formation of potentially harmful compounds. The effect of the type of flour on the formation of furfurals and dicarbonyl compounds was studied in a dough model system during baking that contains water or glucose in order to promote the Maillard reaction and caramelization. The formation of methylglyoxal and glyoxal was significantly reduced in spelt and teff formulations compared to wheat flour formulations, respectively. In contrast, samples formulated with oat, teff, and rye showed a significant increase in the levels of 3-deoxyglucosone. Similarly, spelt and teff formulations presented significantly higher concentrations of hydroxymethylfurfural, and spelt, teff, and rye presented higher concentrations of furfural. Therefore, the formation of process contaminants and undesirable compounds in new food products formulated with different flours replacing the traditional wheat flour should be considered carefully in terms of food safety.

  15. Nuclear analytical methods on ancient Thai rice

    International Nuclear Information System (INIS)

    Won-in, K.; Thongleurm, C.; Dararutana, P.

    2013-01-01

    For more than half of humanity, rice is life. Rice is a grain which has shaped the history, culture, diet and economy of billions of people in Asia. In Thailand, it is the essence of life. Archaeological evidence revealed that rice had been planted in northeastern area of Thailand more than 5,500 years ago which is earlier than in China and India. The ancient rice grains were found in various archaeological sites in Thailand such as Nakhon Nayok, Suphan Buri and Prachin Buri Provinces. In this work, the ancient black rice from Nakhon Nayok Province was elementally analyzed using scanning electron microscope coupled with energy dispersive X-ray fluorescence spectroscopy, proton induced X-ray emission spectroscopy and micro-beam energy dispersive X-ray fluorescence spectroscopy. Infrared (IR) spectroscopy was also used to study the chemical composition and bio-molecular structure. The grains were oblique in shape with a rough surface. Three major elements (Si, Ca and Al) and other trace elements were detected. The IR spectra provided some information about the presence of molecular bonds. (author)

  16. Elaboration and evaluation of gluten-free cookies made with rice bran and rice and soy flours

    OpenAIRE

    Mariani, Marieli Almeida; Oliveira, Viviani Ruffo de; Faccin, Rafaela; Rios, Alessandro de Oliveira; Venzke, Janaína Guimarães

    2015-01-01

    A exclusão do glúten da dieta é um grande desafio, pois muitos produtos que o contém fazem parte dos hábitos alimentares da população. Esse trabalho teve como objetivo avaliar as características físicas, químicas e sensoriais de biscoitos sem glúten, elaborados a partir de farinha de arroz, farelo de arroz e farinha de soja. Foram elaboradas quatro formulações: FT- padrão (trigo); FAFS- farinhas de arroz e de soja; FEFS- farelo de arroz e farinha de soja (1:1); FAFEFS- farinhas de arroz e de ...

  17. GROWTH RATE AND IDENTIFICATION OF YEASTS IN THREE DIFFERENT MEDIA: FLOUR, SPROUT OF CEREALS AND COMMERCIAL MEDIA

    Directory of Open Access Journals (Sweden)

    P DEHGHAN

    2002-12-01

    Full Text Available Introduction. The yeasts are a large group of fungi. In addition to their different uses in food industries and pharmacology they can also cause human and animal infections under predisposing factors. For investigating the yeast"s growth phases and diagnosis of the species, they should culture in media from natural sources like the seeds on the commercial media. According to yeast"s nutritinal requierments and considering the various nutritional materials of seeds like wheat, rice, barney and better use of these seed"s compounds during sprouting, this research was done with the aim of measurment of growth rate and yeasts characterization in such media. Methods. For making seeds media, a fixed quantity of seed"s flour or sprout"s flour was added to a certain amount of agar in acidotic condition (pH=5.8. The germination of seeds was done by Hus method and for colony counting Mc, Farland tubes were used and microscopic and macroscopic characteristics were investigated and compared in both synthetic and seed media Results. The results showed that the rate of yeasts growth in all germinated seeds was more than the seeds themeselves. Statistical analysis showed no significal difference between the growth rate of yeasts in both wheat and barney sprout compared to the commercial media. In the microscopic studies, the species of Candida albicans in wheat flour has produced more chlamydoconidia than the synthetic medium of corn meal agar. Also production of the capsule in C.neoformans in the seed"s media has been better than the synthetic media. Discussion. According to the promising results obtained from the present study regard to the growth rate and differentiation of the fungal species in such media, standardization and mass production of them in our country would seem to be an productive step towards self sufficiency.

  18. Characteristics and composition of watermelon, pumpkin, and paprika seed oils and flours.

    Science.gov (United States)

    El-Adawy, T A; Taha, K M

    2001-03-01

    The nutritional quality and functional properties of paprika seed flour and seed kernel flours of pumpkin and watermelon were studied, as were the characteristics and structure of their seed oils. Paprika seed and seed kernels of pumpkin and watermelon were rich in oil and protein. All flour samples contained considerable amounts of P, K, Mg, Mn, and Ca. Paprika seed flour was superior to watermelon and pumpkin seed kernel flours in content of lysine and total essential amino acids. Oil samples had high amounts of unsaturated fatty acids with linoleic and oleic acids as the major acids. All oil samples fractionated into seven classes including triglycerides as a major lipid class. Data obtained for the oils' characteristics compare well with those of other edible oils. Antinutritional compounds such as stachyose, raffinose, verbascose, trypsin inhibitor, phytic acid, and tannins were detected in all flours. Pumpkin seed kernel flour had higher values of chemical score, essential amino acid index, and in vitro protein digestibility than the other flours examined. The first limiting amino acid was lysine for both watermelon and pumpkin seed kernel flours, but it was leucine in paprika seed flour. Protein solubility index, water and fat absorption capacities, emulsification properties, and foam stability were excellent in watermelon and pumpkin seed kernel flours and fairly good in paprika seed flour. Flour samples could be potentially added to food systems such as bakery products and ground meat formulations not only as a nutrient supplement but also as a functional agent in these formulations.

  19. THE USE OF PSEUDO-CEREALS FLOURS IN BAKERY / UTILISATION DE FARINES DES PSEUDO-CEREALES DANS LA BOULANGERIE

    Directory of Open Access Journals (Sweden)

    ROMULUS MARIAN BURLUC

    2012-06-01

    Full Text Available Nowadays, a special attention should be given to the nutritional properties of foods. In the bakery industry there is a tendency to develop innovative range of bakery products by using the therapeutic role of cereals that are not used at their true potential (buckwheat, millet, rice, oats. Among bioactive components present in the pseudocereal flours, flavones group is highlighted, in particular rutine, the most important ramnoglicosid with multiple beneficial effects on health. The aims of this study were the obtention of different bakery products (bread, biscuits from raw materials with high therapeutic potential (fiber, antioxidant capacity, minerals, the optimization of process parameters and recipes, and the characterization of finished products in terms of sensory and physico-chemical properties. The results confirm that the use of unusual raw materials for the Romanian market led to obtaining high quality finished products with special therapeutic features.

  20. EFFECT OF THE ADDITION OF DEFATTED OKRA SEED (Abelmoschus esculentus FLOUR ON THE CHEMICAL COMPOSITION, FUNCTIONAL PROPERTIES AND Zn BIOAVAILABILITY OF PLANTAIN (Musa paradisiacal Linn FLOUR

    Directory of Open Access Journals (Sweden)

    Tesleem Ibrahim

    2012-08-01

    Full Text Available In Nigeria it is advised that nursing mothers should give their baby plantain flour paste “amala ogede” with ‘ewedu’ Corchorus olitorius soup during the process of weaning their baby. The over matured okra that cannot be cut with kitchen knife are thrown away in Nigeria, this lead to postharvest loss of okra. The seed in this okra could be utilised by processing into okra seed flour for the fortification of plantain flour. Since the okra seed flour is rich in oil and the oil contains cyclopropenoid fatty acids which cause some toxicity concerns therefore this work is to evaluate the chemical composition, the functional properties and Zn bioavailability of plantain flour mixed with defatted okra seed flour. The nutrient content increased significantly (P≤0.05, protein; 3.88 – 11.38 %, fibre; 3.03 – 16.30 % and ash; 2.72 – 5.77 % while the fat and carbohydrate content reduced significantly (P≤0.05 as the percentage of defatted okra seed flour increased. The bulk density of the plantain flour decreased significantly (P≤0.05 from 0.795 g/cm3 to 0.769 g/cm3 as the percentage of okra seed flour increased while the least gelation concentration increased significantly (P≤0.05 (10 to 20. The calculated [Ca][Phytate]/[Zn] molar ratio for the plantain flour mixed with defatted okra seed flour (0.02 – 0.04 mol/kg were below the critical level. The increase in the least gelation concentration coupled with increase in the protein content of the resultant flour from the blend means more of the protein will be available in the food made from the plantain flour mixed with defatted okra seed flour.

  1. Incorporation of buriti endocarp flour in gluten-free whole cookies as potential source of dietary fiber.

    Science.gov (United States)

    Becker, Fernanda Salamoni; Damiani, Clarissa; de Melo, Adriane Alexandre Machado; Borges, Paulo Rogério Siriano; Boas, Eduardo Valério de Barros Vilas

    2014-12-01

    Cookies were prepared by replacing a mixture of brown rice flour (70%) and corn starch (30%) (BRFCS) by buriti endocarp flour (BEF) (0, 5, 10, 15 or 20%). BEF figured as a potential source of dietary fiber (70.53 g 100 g(-1)), especially of insoluble fiber (67.50 g 100 g(-1)), and gluten-free whole cookies showed increased dietary fiber content by adding 5, 10, 15 and 20% BEF (8.58 to 20.02 g 100 g(-1)) when compared to control cookie (6.91 g 100 g(-1)). The addition of BEF affected diameter, spread ratio, color and texture of cookies. All cookies added with BEF were darker, harder and presented smaller diameter and smaller spread ratio than the control cookie. These difference increased proportionally to level of substitution of BRFSC by BEF. Gluten-free whole cookies with up to 15% BEF were well accepted by consumers. Therefore, the use of BEF in cookies may increase the availability of functional ingredients source of dietary fiber for celiac consumers, add economic value to buriti processing by-products and decrease environmental impacts due to the high amounts of waste generated by buriti processing industries.

  2. Preparation of a Breadfruit Flour Bar.

    Science.gov (United States)

    Nochera, Carmen L; Ragone, Diane

    2016-05-20

    Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar), test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk ( Artocarpus altilis × Artocarpus mariannensis ), was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

  3. [Product development on the basis of cereal and leguminous flours to coeliac disease in children between 6-24 months; I: formulation and acceptability].

    Science.gov (United States)

    Cerezal Mezquita, P; Urtuvia Gatica, V; Ramírez Quintanilla, V; Romero Palacios, N; Arcos Zavala, R

    2011-01-01

    The revaluation of the Andean cultivations, quinua (Chenopodium quinua Willd) and lupin (Lupinus albus L.), to be used in nutritional mixtures, with traditional cereals like corn (Zea mays L.) and rice (Oryza sativa L.), originate mixtures without gluten which constitute a good alternative for the nutrition of children under 24 months that suffer from celiac disease, since they improve the quality of the protein, by essential amino acids compensation, and also impacts in the product's diversification strategy. In the present work, the percentage composition of each flour in the mixture was determined by means of Linear Programming by means of the Solver form from the Excel spreadsheet. Prolamines were determined in the quinua and lupin flours by the ELISA test and the HPLC technique was used in both products obtained called "sweet mix" and "dessert mix", to define the quantity of amino acids with the purpose of providing around the 15% of the proteins required in the day. The flour mixtures selected as optimum, sweet mix, suitable for the preparation of sweet pancakes, as well as for the dessert mix, that by addition of water or milk produce a semi solid dessert, were evaluated after three months of storage, being acceptable their microbiological, bromatological and sensorial requirements, corroborating the results with the good acceptance of the products, prepared from the formulated mixtures, by the children of two Day Care centers of the City of Antofagasta-Chile.

  4. In vitro Starch Hydrolysis Rate, Physico-chemical Properties and Sensory Evaluation of Butter Cake Prepared Using Resistant Starch Type III Substituted for Wheat Flour.

    Science.gov (United States)

    Pongjanta, J; Utaipattanaceep, A; Naivikul, O; Piyachomkwan, K

    2008-09-01

    Resistant starch type III (RS III) derived from enzymatically debranched high amylose rice starch was prepared and used to make butter cake at different levels (0, 5, 10, 15 and 20%) in place of wheat flour. Physico-chemical properties, sensory evaluation, and in vitro starch hydrolysis rate of the developed butter cake were investigated. This study showed that the content of resistant starch in butter cake increased significantly (Pcake with RS III replacement had a significantly lower in vitro starch hydrolysis rate compared to the control cake (0% RS III). The rates of starch hydrolysis from 0 to 180 min digestion time for 0, 5, 10 15, and 20% RS III in place of wheat flour in butter cakes were 3.70 to 67.65%, 2.97 to 64.86%, 2.86 to 59.99%, 2.79 to 55.96 and 2.78 to 53.04% respectively. The physico-chemical properties of 5 to 10% RS III substituted with wheat flour in the butter cake were not significantly different from the control cake and were moderately accepted by panellists in the sensory evaluation test.

  5. The impact of elevated CO2 and temperature on grain quality of rice grown under open-air field conditions.

    Science.gov (United States)

    Jing, Liquan; Wang, Juan; Shen, Shibo; Wang, Yunxia; Zhu, Jianguo; Wang, Yulong; Yang, Lianxin

    2016-08-01

    Rising atmospheric CO2 is accompanied by global warming. However, interactive effects of elevated CO2 and temperature have not been well studied on grain quality of rice. A japonica cultivar was grown in the field using a free-air CO2 enrichment facility in combination with a canopy air temperature increase system in 2014. The gas fumigation (200 µmol mol(-1) above ambient CO2 ) and temperature increase (1 °C above ambient air temperature) were performed from tillering until maturity. Compared with the control (ambient CO2 and air temperature), elevated CO2 increased grain length and width as well as grain chalkiness but decreased protein concentrations. In contrast, the increase in canopy air temperature had less effect on these parameters except for grain chalkiness. The starch pasting properties of rice flour and taste analysis of cooked rice indicated that the palatability of rice was improved by CO2 and/or temperature elevation, with the combination of the two treatments showing the most significant changes compared with ambient rice. It is concluded that projected CO2 in 2050 may have larger effects on rice grain quality than the projected temperature increase. Although deterioration in milling suitability, grain appearance and nutritional quality can be expected, the taste of cooked rice might be better in the future environment. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  6. Physical, milling, cooking, and pasting characteristics of different rice varieties grown in the valley of Kashmir India

    Directory of Open Access Journals (Sweden)

    Tanveer Ahmad Rather

    2016-12-01

    Full Text Available In the present study, three different rice varieties, namely frome chena (FC, safaid chena (SC, and barkat chena (BC, were evaluated for various quality aspects in terms of physical, milling, cooking, and pasting characteristics. Among the three rice varieties SC had the highest thousand kernel weight and length breadth ratio (L/B. While as, BC had the lowest thousand kernel weight and FC had lowest L/B. Bulk density was found to be highest for FC followed by SC and BC. FC had density of 769.01 kg/m3. Milling characteristic in terms of broken percentage and head rice yield showed non-significant difference between the varieties. Head rice yield was below 70% in all the three varieties. All the three varieties took similar time to cook and cooking time varied non-significantly between 23.66 and 25.83 min. L/B ratio after cooking was found to be highest for FC followed by BC and SC. Elongation ratio of rice after cooking did not varied significantly between varieties. Elongation ratio after cooking ranged from 1.60 to 1.70. Pasting profile of rice flour was determined using rapid visco analyzer. Significant difference was observed in pasting profile of studied rice varieties.

  7. CHOICE OF EFFICIENT METHOD OF ADDING FLOUR FROM BUCKWHEAT BRAN

    Directory of Open Access Journals (Sweden)

    E. I. Ponomareva

    2015-01-01

    Full Text Available Nowadays the production of functional bakery products for therapeutic and preventive nutrition is of current importance. The problem of providing the population with functional products can be solved by enriching the recipes with vitamins, dietary fiber, micro and macronutrients. At the chair of "Technology of baking, confectionery, pasta and grain processing" of Voronezh State University of Engineering Technologies the recipe of no-salt bread from mixture of baker’s first grade wheat flour and whole-grain wheat with adding buckwheat bran flour, that increases the nutrition value of the product, has been developed. Flour from buckwheat bran is characterized by a high-scale balance of the content of essential amino acids, good digestibility, rich in vitamins (especially B vitamins, PP, dietary fiber, minerals (potassium, calcium, magnesium, iron. The use of buckwheat flour from the bran in bread production stimulates the creation of favorable intestinal microflora, normalizes blood sugar level, and excretes toxins, toxic salts and heavy metals from the body. We have conducted a research on how to make the rational choice of method of adding buckwheat bran flour enricher into dough from a mixture of first grade wheat flour and whole-grain wheat, compressed yeast and potable water, thus ensuring high and stable physical and chemical characteristics and the quality of the end product. Also, we have discovered that the bakery product prepared on tight sponge with addition of enricher has much better organoleptical properties in comparison with the others. Bread is characterized by a pleasant taste and flavour, elastic porous crumb. It has been found that the consumption of 100 g of a mixture of no-salt bread from first grade wheat flour and whole-grain with adding buckwheat bran flour will provide enough daily intake of protein 10.7%, fat 1.5%, carbohydrates 10.4% dietary fiber 16.3%, amino acids 2.5 14.0%. No-salt bread is recommended to people

  8. Comparative Evaluation of Functional Properties of Some Commonly Used Cereal and Legume Flours and Their Blends

    Directory of Open Access Journals (Sweden)

    Haq Nawaz

    2015-12-01

    Full Text Available Functional properties such as protein solubility, swelling capacity, water holding capacity, gelling ability, bulk density and foaming capacity of flours of some commonly used cereals and legume (wheat, refined wheat, maize and chickpea and their blends were studied. Blends of flours were prepared by mixing equal proportions of selected floors. Statistically significant difference  in studied functional properties except bulk density was observed among cereal flours and their blends. Chickpea flour was found to possess comparatively high water holding capacity, protein solubility index and swelling capacity. The functional properties of maize and wheat flours were found to be improved when blended with chickpea. Chickpea flour and its blends with cereal flours were found to possess good functional score and suggested as favorable candidates for use in the preparation of viscous foods and bakery products. The data provide guidelines regarding the improvement in functional properties of economically favorable cereal flours.

  9. Effect of wheat flour characteristics on sponge cake quality.

    Science.gov (United States)

    Moiraghi, Malena; de la Hera, Esther; Pérez, Gabriela T; Gómez, Manuel

    2013-02-01

    To select the flour parameters that relate strongly to cake-making performance, in this study the relationship between sponge cake quality, solvent retention capacity (SRC) profile and flour physicochemical characteristics was investigated using 38 soft wheat samples of different origins. Particle size average, protein, damaged starch, water-soluble pentosans, total pentosans, SRC and pasting properties were analysed. Sponge cake volume and crumb texture were measured to evaluate cake quality. Cluster analysis was applied to assess differences in flour quality parameters among wheat lines based on the SRC profile. Cluster 1 showed significantly higher sponge cake volume and crumb softness, finer particle size and lower SRC sucrose, SRC carbonate, SRC water, damaged starch and protein content. Particle size, damaged starch, protein, thickening capacity and SRC parameters correlated negatively with sponge cake volume, while total pentosans and pasting temperature showed the opposite effect. The negative correlations between cake volume and SRC parameters along with the cluster analysis results indicated that flours with smaller particle size, lower absorption capacity and higher pasting temperature had better cake-making performance. Some simple analyses, such as SRC, particle size distribution and pasting properties, may help to choose flours suitable for cake making. Copyright © 2012 Society of Chemical Industry.

  10. Radiation disinfection of rice-straw products

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Hitoshi; Ishigaki, Isao (Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment); Ohki, Yumi

    1991-11-01

    For the quarantine treatment of rice-straw products from foreign countries, irradiation effects of gamma-rays and electron beams on plant pathogenic microorganisms especially on fungi were investigated. The total aerobic bacteria in rice-straw was determined to be 3x10{sup 7} - 3x10{sup 8} per gram which consisted mainly of Pseudomonas, Flavobacterium, Arthrobacter and Erwinia. The principal bacteria in rice-straw could be eliminated with 5 kGy of gamma irradiation. Deinococcus proteolyticus and Pseudomonas radiora were the main survivors at 5 to 12 kGy of irradiation. Saprophytic fungus which belongs to Dimorphospora also survived up to 8 kGy of irradiation. The D{sub 10} values of 26 strains of fungi isolated from rice-straw were 1.1 to 2.5 times higher in the dry condition compared to the values when irradiated in 0.067 M phosphate buffer solution. The induction dose in the dry condition also increased from 1.5 to 10 times than that in the wet condition. In the case of electron beam irradiation of fungi under dry conditions, D{sub 10} values were about 1.3 times higher than that of gamma irradiation. From this study, the dose necessary to reduce the plant pathogenic fungi in rice-straw at a level below 10{sup -4} per gram was estimated to be as 7-8 kGy for gamma-irradiation and 10 kGy for electron beam irradiation. (author).

  11. The molecular biology and biochemistry of rice endosperm α-globulin

    International Nuclear Information System (INIS)

    Shorrosh, B.S.

    1989-01-01

    The author's first objective was to isolate a cDNA clone that encodes the rice endosperm α-globulin. Purified antibodies against a rice storage protein, α-globulin, were used to screen a λgt11 cDNA expression library constructed from immature rice seed endosperm. The cDNA insert of clone 4A1 (identified by antibody screening) was used as a probe to identify long cDNA inserts in the library. The deduced amino acid sequence of clone A3-12 cDNA insert (identified by cDNA screening) contained the amino acid sequences of three cyanogen bromide peptides fragment of α-globulin. The calculated molecular weight and amino acid composition of the deduced amino acid sequence were similar to the α-globulin protein. Northern blot analysis indicated that mRNA of one size, approximately 1.0 kb, is expressed. Southern genomic blot analysis revealed one band with EcoRI or Hind III digestion. Cell-free translation and immunoprecipitation showed that the initial translation product is approximately 2,000 daltons larger than the mature protein. The amino acid sequence of α-globulin revealed limited regions of similarities with wheat storage proteins. The author concludes that the cDNA insert in clone A3-12 contained the entire coding region of α-globulin protein and that α-globulin is encoded by a single gene. My second objective was to inhibit the degradation of α-globulin in the salt extract of rice flour. The salt extract of rice flour contained an acid protease whose optimal pH was 3 for 3 H-casein hydrolysis. A polypeptide with molecular weight of 20,000 was immunologically reactive with α-globulin antibodies and is produced by limited proteolysis in the extract. Pepstatin inhibited the proteolysis of 3H-casein and slowed the proteolysis of α-globulin

  12. Sensory optimization of broken-rice based snacks fortified with protein and fiber.

    Science.gov (United States)

    Sriwattana, S; Laokuldilok, N; Prinyawiwatkul, W

    2008-08-01

    A 3-component mixture experiment was used to optimize the formulation of broken-rice based snack fortified with protein and fiber based on consumer sensory acceptability. Soy protein isolate and guar gum were used as a good source of protein and fiber, respectively, according to DRV (daily reference value) based on a 2000-calorie diet. A consumer panel evaluated sensory acceptability of color, crispness, and flavor, and overall liking of 12 experimental broken-rice based snack formulations. Predicted models derived from the restricted nonintercept regression analysis were used to plot mixture response surfaces (MRS) of each sensory attribute. Areas within the MRS plots having predicted acceptability scores of at least 6.5 (on a 9-point hedonic scale) for color, crispness, flavor, and overall liking were selected to derive a predicted optimum formulation range. Flavor acceptability was a limiting factor in attaining the optimum formulation range, which consisted of 40% to 48% broken-rice flour, 8% to 16% guar gum, and 20% to 33% soy protein isolate. To verify the obtained predicted models, the formulation containing 48% broken-rice flour, 8% guar gum, and 20% soy protein isolate, which was located in the optimum area, was chosen to support our effort to utilize and add value to broken rice. Selected physicochemical measurements of the chosen optimized formulation were determined. One serving size (30 g) of the chosen optimized snack product provided 6.58 g protein and 3.80 g dietary fiber, which met the US FDA definition of a good source of protein and dietary fiber.

  13. Variations in U.S. Consumers' Acceptability of Korean Rice Cake, Seolgitteok, with respect to Sensory Attributes and Nonsensory Factors.

    Science.gov (United States)

    Cho, Sungeun; Yoon, Suk Hoo; Min, Jieun; Lee, Suji; Tokar, Tonya; Lee, Sun-Ok; Seo, Han-Seok

    2016-01-01

    Because the Korean rice cake, Seolgitteok, is mainly prepared with rice flour containing no gluten-protein associated with celiac disease, it can be considered for inclusion in a gluten-free diet. However, Western consumers may be unlikely to enjoy the plain flavor and chewy texture of Seolgitteok. This study aimed to determine both sensory and nonsensory factors that might affect U.S. consumers' acceptability of Seolgitteok. A total of 119 U.S. consumers rated 5 Seolgitteok samples, differentiated by descriptive sensory analysis, with respect to hedonic impression and just-about-right aspects of sensory attributes. Nonsensory factors such as demographic profile, innovativeness, social representation, sensation-seeking, and personality traits were also assessed. Addition levels of brown rice flour (0% to 100%) and sugar (5% to 20%) not only enriched flavor, but also lessened chewiness of Seolgitteok, thereby increasing an overall hedonic impression. Moreover, consumer acceptability of Seolgitteok varied with respect to nonsensory factors. Seolgitteok was more appreciated by males, sensation seekers, and individuals constrained by social desirability than by other groups. In conclusion, these findings demonstrate that U.S. consumers' acceptability of Seolgitteok varies not only by sensory attributes such as rice flavor, sweetness, and chewiness, but also by nonsensory factors such as gender, sensation-seeking characteristics, and personality traits. © 2015 Institute of Food Technologists®

  14. A 90-day subchronic feeding study of genetically modified rice expressing Cry1Ab protein in Sprague-Dawley rats.

    Science.gov (United States)

    Song, Huan; He, Xiaoyun; Zou, Shiying; Zhang, Teng; Luo, Yunbo; Huang, Kunlun; Zhu, Zhen; Xu, Wentao

    2015-04-01

    Bacillus thuringiensis (Bt) transgenic rice line (mfb-MH86) expressing a synthetic cry1Ab gene can be protected against feeding damage from Lepidopteran insects, including Sesamia inferens, Chilo suppressalis, Tryporyza incertulas and Cnaphalocrocis medinalis. Rice flour from mfb-MH86 and its near-isogenic control MH86 was separately formulated into rodent diets at concentrations of 17.5, 35 and 70 % (w/w) for a 90-day feeding test with rats, and all of the diets were nutritionally balanced. In this study, the responses of rats fed diets containing mfb-MH86 were compared to those of rats fed flour from MH86. Overall health, body weight and food consumption were comparable between groups fed diets containing mfb-MH86 and MH86. Blood samples were collected prior to sacrifice and a few significant differences (p < 0.05) were observed in haematological and biochemical parameters between rats fed genetically modified (GM) and non-GM diets. However, the values of these parameters were within the normal ranges of values for rats of this age and sex, thus not considered treatment related. In addition, upon sacrifice a large number of organs were weighed, macroscopic and histopathological examinations were performed with only minor changes to report. In conclusion, these results demonstrated that no toxic effect was observed in the conditions of the experiment, based on the different parameters assessed. GM rice mfb-MH86 is as safe and nutritious as non-GM rice.

  15. Karakterisasi Mutu dan Nilai Gizi Nasi Mocaf dari Beras Analog - (Characterization of Quality and Nutrition Value of Cooked Rice Mocaf from Rice Analog

    Directory of Open Access Journals (Sweden)

    Enny Hawani Loebis

    2017-06-01

    Full Text Available Dependence on rice consumption needs to be reduced to overcome the problems of rice supply and health problems. Alternative proposed is producing mocaf-based rice analog. This research aims to study the quality characterization and nutritional value of mocaf-based rice analog. Rice mocaf was made based on mixture of mocaf, rice flour, water and palm oil using variable: 50, 60 and 70% mocaf.  Mocaf rice then cooked by using rice cooker, steamer or microwave. The results showed mocaf rice 60% yield highest calorific value.  The best cooking method  was steaming that resulted nutrient content and calorific value consisting of 49.15% water; 2.05% fat; 2.09% protein; 46.45% carbohydrate; 35.8 mg/kg of iron; 403.4 mg/kg of potassium; 193.8 mg/kg of calcium, 2.0 mg/kg of vitamin B1 and 212.53 ca/100 g calorific value.Keywords: mocaf, nutritional value, quality characterisation, rice ABSTRAKKetergantungan pada konsumsi beras perlu dikurangi untuk mengatasi permasalahan pasokan beras dan masalah kesehatan. Alternatif yang dapat diusulkan adalah dengan pembuatan beras analog berbasis mocaf. Penelitian ini bertujuan mempelajari karakterisasi mutu dan nilai gizi nasi mocaf dari beras analog. Beras mocaf dibuat berdasarkan campuran mocaf, tepung beras, air dan minyak goreng sawit, dengan komposisi mocaf  50, 60 dan 70%. Beras mocaf kemudian dimasak dengan cara menggunakan rice cooker, pengukusan atau microwave. Hasil penelitian menunjukkan beras mocaf 60% menghasilkan nasi mocaf dengan nilai kalori tertinggi. Pemasakan terbaik adalah dengan cara pengukusan dengan kandungan gizi dan nilai kalori yang dihasilkan terdiri dari 49,15%  air; 2,05% lemak; 2,09% protein; 46,45% karbohidrat; 35,8 mg/kg besi; 403,4 mg/kg kalium; 193,8 mg/kg kalsium, 2,0 mg/kg vitamin B1 dan 212,53 kal/100 g nilai kalori.Kata kunci: beras, karakterisasi mutu, mocaf, nilai gizi

  16. Effects of uniquely processed cowpea and plantain flours on wheat bread properties

    Science.gov (United States)

    The effect of incorporating uniquely processed whole-seed cowpeas or plantain flours at 10 or 20 g/100 g in all-purpose flour on paste viscosity and bread-baking properties in model bread was determined. Flours from plantains processed as follows: unblanched plantains dried at 60 degrees C (PLC), so...

  17. Biological resistance of polyethylene composites made with chemically modified fiber or flour

    Science.gov (United States)

    Rebecca E. Ibach; Craig M. Clemons

    2002-01-01

    The role of moisture in the biological decay of wood-plastic composites was investigated. Southern pine wood fiber and ponderosa pine wood flour were chemically modified using either acetic anhydride (AA), butylene oxide (BO), or propylene oxide (PO). A 50:50 mixture of high density polyethylene and either chemically modified fiber or flour, or untreated fiber or flour...

  18. Quality evaluation of cassava-pigeon pea composite flour and the ...

    African Journals Online (AJOL)

    Cassava flour (CF) and pigeon pea flours (PF) were respectively produced and blended in the ratios of 100:0, 95:5, 90:10, 85:15 and 80:20. The flour blends were subjected to proximate, functional and anti-nutrient analysis after which they were used to produce cookies. The sensory and physical characteristics were ...

  19. Milked flours in Spain (I: 1865-1965

    Directory of Open Access Journals (Sweden)

    Josep Boatella

    2013-12-01

    Full Text Available The paper deals with an historical review of the origin of milked flours, and their introduction in Spain. Commercial products are described and a list of main factories producing and distributing them (until 1965 is included. Product composition shows a high level of variability, mainly due to the quick evolution in the use of different ingredients (increase of soluble carbohydrates and blended flours, fortification with minerals and vitamins, etc.. Ingredients and composition were changing along the years according to the increasing knowledge in nutrition sciences and food technology. Regarding the factories producing milked flours, we can observe a concentration trend during 20’s and 30’s. In contrast, in further decades new producers appeared in the market and some of them are still actives at this moment.

  20. Dielectric properties of wheat flour mixed with oat meal

    Science.gov (United States)

    Łuczycka, D.; Czubaszek, A.; Fujarczuk, M.; Pruski, K.

    2013-03-01

    Possibilities of using electric methods for determining admixtures of oat meal to wheat flour, type 650 are presented. In wheat flour, oat meal and mixtures containing 10, 20 and 30% of the oat meal, moisture, protein, starch and ash content, sedimentation value, yield and softening of wet gluten were determined. In samples containing 0, 5, 10, 15, 20, 25, 30 and 100% of oat meal, the dielectric loss factor and conductivity were determined using an impedance analyzer for electromagnetic field frequency ranging from 0.1-20 kHz. It was found that the dielectric loss factor varied for tested material. The best distinguishing between tested mixtures was obtained at the measuring electromagnetic field frequency of 20 kHz. The loss factor was significantly correlated with the yield of wet gluten and the sedimentation value, parameters indicating the amount and quality of gluten proteins in flour.

  1. Rheological and microbiological study of flour treated by irradiation

    International Nuclear Information System (INIS)

    Laabidi, Othmen

    2007-01-01

    the aim this work is to study the effectiveness of radio treatment and its effect on the conservation of flour and their various parameters (physico-chemical and rheological). The flour has been treated with different doses (0, 0.75, 1.5 and 3 kGy), physico-chemical, rheological, microbiological and sensory analyses were made.The results show that the irradiation as a treatment for decontamination gave a highly effective. Indeed, a dose of 1.5 kGy allows a total destruction of yeasts and molds. Thus, from the point of view physico-chemical, increasing the dose of radiation causes a change in physical and chemical properties and rheological of flour. for the characteristics of bread, increasing the dose of radiation affects the quality of bread. (Author). 38 refs

  2. Development of newly enriched bread with quinoa flour and whey

    Science.gov (United States)

    Salazar, D. M.; Naranjo, M.; Pérez, L. V.; Valencia, A. F.; Acurio, L. P.; Gallegos, L. M.; Alvarez, F. C.; Amancha, P. I.; Valencia, M. P.; Rodriguez, C. A.; Arancibia, M. Y.

    2017-07-01

    Ecuador, Bolivia, and Peru are countries with the highest amount of quinoa production in the world due to the proximity to the Andes. Further, Ecuador has a high production of dairy products, particularly fresh cheese of which production gives a high volume of whey, without further use, with the consequent loss of their nutritional value. The present study was performed to develop a new fortified bread through the incorporation of quinoa flour and whey at three different concentrations. The use of quinoa and whey improved the texture, shelf life and sensory characteristics of bread, compared to those prepared with wheat flour. This study shows the potential of quinoa flour and whey as ingredients in the development of baked products.

  3. Physical properties of snacks made from cassava leaf flour

    Directory of Open Access Journals (Sweden)

    Adriana Cristina Ferrari

    2014-02-01

    Full Text Available The food industry is continually growing with new products becoming available every year. Extrusion combines a number of unit operations in one energy efficient rapid continuous process and can be used to produce a wide variety of snacks foods. The objective of this study was to evaluate the effect of extrusion temperature, screw speed, and amount of cassava leaf flour mixed with cassava starch on the physical properties of extruded snacks processed using a single screw extruder. A central composite rotational design, including three factors with 20 treatments, was used in the experimental design. Dependent variables included the expansion index, specific volume, color, water absorption index, and water solubility index. Among the parameters examined, the amount of cassava leaf flour and extrusion temperature showed significant effects on extruded snack characteristics. Mixtures containing 10% of cassava leaf flour extruded at 100°C and 255 rpm shows favorable levels of expansion, color, water absorption index, and water solubility index.

  4. Transfer of gaseous iodine from atmosphere to rough rice, brown rice and polished rice

    International Nuclear Information System (INIS)

    Sumiya, Misako; Uchida, Shigeo; Muramatsu, Yasuyuki; Ohmomo, Yoichiro; Yamaguchi, Shuho; Obata, Hitoshi.

    1987-01-01

    Experiments were carried out in order to obtain information required for establishing transfer coefficients of gaseous iodine (I 2 ) to rough rice, brown rice and polished rice. The gaseous iodine deposited on young rice plants before the heading period was scarcely found in the rough rice harvested at the full ripe stage. The biological half life of iodine in hull, however, was much slower than that in leaves of 14 days. The translocation of iodine from leaves and stalks to rough rice was not clearly recognized. Therefore, it was deduced that iodine found in brown rice mainly should originate from that deposited on the hull. The distribution ratios of iodine between rough rice and brown rice, and between brown rice and polished rice were 100:4 and 100:30 on 100 grains basis, respectively. If average normalized deposition velocity (V d(m) ) or derived deposition velocity (V s ) are given, the transfer coefficients of gaseous iodine to rough rice (TF r ), brown rice (TF b ) and polished rice (TF p ) could be calculated. (author)

  5. Endophytic Colonization and In Planta Nitrogen Fixation by a Herbaspirillum sp. Isolated from Wild Rice Species

    Science.gov (United States)

    Elbeltagy, Adel; Nishioka, Kiyo; Sato, Tadashi; Suzuki, Hisa; Ye, Bin; Hamada, Toru; Isawa, Tsuyoshi; Mitsui, Hisayuki; Minamisawa, Kiwamu

    2001-01-01

    Nitrogen-fixing bacteria were isolated from the stems of wild and cultivated rice on a modified Rennie medium. Based on 16S ribosomal DNA (rDNA) sequences, the diazotrophic isolates were phylogenetically close to four genera: Herbaspirillum, Ideonella, Enterobacter, and Azospirillum. Phenotypic properties and signature sequences of 16S rDNA indicated that three isolates (B65, B501, and B512) belong to the Herbaspirillum genus. To examine whether Herbaspirillum sp. strain B501 isolated from wild rice, Oryza officinalis, endophytically colonizes rice plants, the gfp gene encoding green fluorescent protein (GFP) was introduced into the bacteria. Observations by fluorescence stereomicroscopy showed that the GFP-tagged bacteria colonized shoots and seeds of aseptically grown seedlings of the original wild rice after inoculation of the seeds. Conversely, for cultivated rice Oryza sativa, no GFP fluorescence was observed for shoots and only weak signals were observed for seeds. Observations by fluorescence and electron microscopy revealed that Herbaspirillum sp. strain B501 colonized mainly intercellular spaces in the leaves of wild rice. Colony counts of surface-sterilized rice seedlings inoculated with the GFP-tagged bacteria indicated significantly more bacterial populations inside the original wild rice than in cultivated rice varieties. Moreover, after bacterial inoculation, in planta nitrogen fixation in young seedlings of wild rice, O. officinalis, was detected by the acetylene reduction and 15N2 gas incorporation assays. Therefore, we conclude that Herbaspirillum sp. strain B501 is a diazotrophic endophyte compatible with wild rice, particularly O. officinalis. PMID:11679357

  6. Effect of Different Diets of Flour Moth on its Parasitoid Wasp Fitness, Trichogramma brassicae (Hym.:Trichogrammatidae

    Directory of Open Access Journals (Sweden)

    Paria Soltaninejad

    2017-03-01

    lowest daily oviposition were found for treatment II (0.77±0.07 and IV (0.42±0.06, respectively. The treatment III and II meaningfully caused the longest parasitoid lifetime in the second (12.31 ± 0.09 days and forth generation (12.36±0.03 days, respectively. Nevertheless, no significant variation in lifetime of the parasitoid between the other treatments was found in the second and forth generations, separately. Several biotic and abiotic factors can influence T. brassicae lifetime such as temperature, adult feeding, humidity, the quality of the host egg and the size of parasitoids. Also, the proportion of wasps surviving at time x (lx were almost similar among all treatments in the second and forth generations, separately. The survival rate fluctuations of T. brassicae reared on eggs of Ch. suppressalis, were similar on different rice varieties and after eight days all adults were dead which was similar to our results. Conclusion: By referring to the results, treatment II, included wheat flour, wheat bran, barley flour, bread yeast and glycerin (ratios: 41.5: 2: 43.5: 3: 10%, respectively is proposed to optimize mass rearing of the parasitoid wasp, T. brassicae as an important biological control agent. The treatment II caused to increase the life span and parasitism rate of T. brassicae and is suitable for mass production of the parasitoid to promote the quality of biological control programs.

  7. Prevalence of Rice Yellow Mottle Virus (RYMV) on Rice Plants ...

    African Journals Online (AJOL)

    Abstract. Incidence of Rice yellow mottle virus (RYMV) on rice plants (ofada) grown in two local government areas (LGAs) of Ogun State had been evaluated during a two year field survey. Six month old rice plants were observed for symptom expression and leaf samples collected for serological indexing. Of the 60 leaf ...

  8. Bambara-wheat composite flour: rheological behavior of dough and functionality in bread.

    Science.gov (United States)

    Erukainure, Ochuko L; Okafor, Jane N C; Ogunji, Akinyele; Ukazu, Happiness; Okafor, Ebele N; Eboagwu, Ijeoma L

    2016-11-01

    The rheological behavior and functional properties of doughs from bambara-wheat composite flour was investigated. Bambara-wheat composite flour was prepared by substituting wheat with 0%, 10%, 15%, and 20% of bambara flour. The rheological behavior of their dough was analyzed with Mixolab. Breads produced from the flour were analyzed for physical characteristics. Organoleptic analysis was carried out by 20 panelists. Mixolab analysis revealed, except for stability time, depreciating values for dough consistency (C1), protein weakening (C2), starch gelatinization (C3), amylase activity (C4), and retrogradation (C5) as the inclusion of bambara flour increased. Physical characteristics of the loaves revealed significant ( P  baking characteristics.

  9. Production and quality evaluation of extruded snack from blends of bambara groundnut flour, cassava starch, and corn bran flour

    OpenAIRE

    Ogunmuyiwa, O. H.; Adebowale, A. A.; Sobukola, O. P.; Onabanjo, O. O.; Obadina, A. O.; Adegunwa, M. O.; Kajihausa, O. E.; Sanni, L. O.; Tomlins, Keith

    2017-01-01

    Protein dense, fiber-rich extruded snacks were produced from blend of bambara groundnut flour, cassava starch, and corn bran flour using a single screw cooking extruder. The snacks were analyzed for their physical properties and proximate composition using standard laboratory procedures. The expansion ratio, specific volume, breaking force, and breaking strength index (BSI) of the snacks ranged from 0.85 to 1.22, 0.75 to 1.30 g/cm3, 3.95 to 36.45 N, and 0.99 to 9.11 N/mm, respectively. The br...

  10. Development of Defatted Soy Flour-Based Adhesives by Acid Hydrolysis of Carbohydrates

    Directory of Open Access Journals (Sweden)

    Peitao Zheng

    2017-04-01

    Full Text Available Soy-based adhesives are attracting increasing attention in recent years because they are a renewable and environmentally friendly raw material. Defatted soy flour (DSF, comprised of 50% protein and 40% carbohydrate, is the most widely used raw material for the preparation of soy-based adhesives that are unfortunately hampered by poor gluability and water resistance. In the present study, we developed a self-crosslinking approach to prepare a formaldehyde-free defatted soy flour-based adhesive (SBA. Carbohydrates in the DSF were hydrolyzed with 0% (controls, 0.5%, 1.0%, 2.0%, 3.0% and 5.0% hydrochloric acid, and cross-linked with proteins to prepare the SBA. The effect of hydrolyzed carbohydrates on the performance of the SBA was investigated, and hydrolyzed carbohydrates significantly increased the amount of reducing sugars, but decreased insoluble substances. Fourier transform infrared spectroscopy (FTIR and X-ray photoelectron spectroscopy (XPS analyses revealed an enhanced cross-linking structure with fewer hydrophilic groups in cured SBAs. Maillard reactions between hydrolyzed carbohydrates and proteins resulted in SBAs with better gluability, rheological properties and thermal stability than controls. Scanning electron microscopy (SEM images showed that plywood bonded with SBA had a higher wood failure rate than controls. This approach has potential for preparing bio-adhesives with enhanced properties from other natural resources with a similar polysaccharides and protein composition.

  11. Electronics

    Science.gov (United States)

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  12. New strategy for the determination of gliadins in maize- or rice-based foods matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: fractionation of gliadins from maize or rice prolamins by acidic treatment.

    Science.gov (United States)

    Hernando, Alberto; Valdes, Israel; Méndez, Enrique

    2003-08-01

    A procedure for determining small quantities of gliadins by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) in gluten-free foods containing relatively large amounts of prolamin proteins from maize or rice is described. We report for the first time that gliadins, the ethanol-soluble wheat prolamin fraction, can be quantitatively solubilized in 1.0 M acetic acid, while the corresponding ethanol-soluble maize or rice prolamin fraction remains insoluble in acetic acid. We describe a methodology for the detection of gliadins in maize and rice foods based on a two-step procedure of extraction (60% aqueous ethanol followed by 1 M acetic acid). Subsequent MALDI-TOFMS analysis of the resulting acidic extract from these gluten-free foods clearly confirms the presence of a typical mass pattern corresponding to gliadin components, ranging from 30 to 45 kDa. Depending on the percentages of maize or rice flours employed in the elaboration of these foods, the combined procedure enables levels of gliadins from 100 to 400 ppm to be detected. The efficiency of this combined procedure corroborates enzyme-linked immunosorbent assay data for a large number of maize/rice gluten-free foods by means of direct visualization of the characteristic gliadin mass pattern in maize or rice foods. Copyright 2003 John Wiley & Sons, Ltd.

  13. Influence of corn flour as pore forming agent on porous ceramic material based mullite: Morphology and mechanical properties

    Directory of Open Access Journals (Sweden)

    Ayala-Landeros J.G.

    2016-01-01

    Full Text Available Porous material was processed by the mixing, molding and pressing the ceramic material, afterward burnout and sintering; through the forming porous, using corn flour at different concentration (10, 15 and 20 wt.% as a pore forming agent; in order to determinate the influence of porous on the mechanical, morphological and structural properties. The effect of the volume fraction of corn flour in the mullite matrix, at various sintering temperature from 1100, 1200, 1300 and 1500°C were tested by Diffraction X ray, showing changes in crystalline phases of mullite (3Al2O3-2SiO2, as result of sintered temperatures. Presence of talcum powder in formula, also cause the formation of the cordierite and cristobalite crystalline phases, giving stability and adhesion to the structure of ceramic material. When sintering at temperatures between 1300 to 1500°C, and it was used the concentration of corn flour 15-20 wt.% as forming agent porous, it was found the better mechanical properties. The scanning electron microscopy analysis shows the presence of open porosity and anisotropy.

  14. Improving properties of sweet potato composite flour: Influence of lactic fermentation

    Science.gov (United States)

    Yuliana, Neti; Nurdjanah, Siti; Setyani, Sri; Novianti, Dini

    2017-06-01

    The use of locally grown crops such as sweet potato as raw material for composite flour is considered advantageous as it reduces the importation of wheat flour. However the use of native sweetpotato flour has drawback properties when applied in the food. This study was aimed to modify sweet potato flour through six methods of lactic fermentation (spontaneous, pickle brine, Lb plantarum, Lc mesentereoides, a mixed of Lb plantarum and Lc mesentereoides, and mixed of Lb plantarum, Lc mesentereoides and yeast) to increase its properties in composite flour. Composite flours were obtained after fermentation of sweet potato slices for 48h in the proportion of 50% sweet potatoes flour and 50% wheat flour. pH, moisture content, swelling power, solubility, and pasting properties were determined for the fermented and unfermented composite flours. The results indicated that the composite fermented flours had better properties than those of non fermented flour. Fermentation increased swelling power, moisture content, meanwhile, solubility, and pH, deacresed. Amylose leaching, however, was not significantly affected by the fermentation process.

  15. 7 CFR 868.310 - Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice...

    Science.gov (United States)

    2010-01-01

    ... Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also Â... Milled Rice Principles Governing Application of Standards § 868.310 Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice...

  16. Extraction of rice bran oil from local rice husk

    International Nuclear Information System (INIS)

    Anwar, J.; Zaman, W.; Salman, M.; Jabeen, N.

    2006-01-01

    Rice Bran Oil is widely used in pharmaceutical, food and chemical industries due to its unique properties and high medicinal value. In the present work, extraction of rice bran oil from different samples of rice husk collected from local rice shellers by solvent extraction method has been studied. Experiments were conducted using a soxhelt apparatus, to extract rice bran oil using hexane, petroleum ether, ethanol and methanol as the solvents and the yields obtained under different conditions were compared. Batch extraction tests showed that the rate of extraction decreases with time and the solution approaches saturation at an exponential rate. (author)

  17. Evaluation of the suitability of cassava and sweetpotato flours for ...

    African Journals Online (AJOL)

    The results showed that water binding capacity, solubility and swelling power affect the overall quality of pasta. Pasta made from sweetpotato composite flour was too brittle and crumbled easily when pressed between the fingers. Pasta made from 50% cassava (Abasafita)/50% hard wheat performed better and showed no ...

  18. 8474 APPLICATION OF THE FLOUR OF FOUR LEGUMINOUS ...

    African Journals Online (AJOL)

    2014-03-01

    Mar 1, 2014 ... However, due to poor post-harvest technologies, more than 35% of annual crop yield is often lost ... seed flours is evaluated 50 days after application. ..... (Harris) and induced effects on the structure of midgut epithelial cells. J.

  19. CD 121 - cultivar with flour characteristics for cookie baking

    OpenAIRE

    Marchioro, Volmir Sergio; Franco, Francisco de Assis; Dalla Nora, Tatiane; Schuster, Ivan; Evangelista, Adriel; Lima, Fábio Junior Alcântara de; Polo, Mateus

    2013-01-01

    CD 121 is indicated for wheat regions with the classification Value for Cultivation and Use 1 and 2, in the states of PR, SC and RS. The cultivar is tolerant to leaf rust, has good agronomic traits, flour suited for cookie baking and an average grain yield of 3.622 kg ha-1.

  20. CD 121 - Cultivar with flour characteristics for cookie baking

    Directory of Open Access Journals (Sweden)

    Volmir Sergio Marchioro

    2013-06-01

    Full Text Available CD 121 is indicated for wheat regions with the classification Value for Cultivation and Use 1 and 2, in the states of PR,SC and RS. The cultivar is tolerant to leaf rust, has good agronomic traits, flour suited for cookie baking and an average grain yieldof 3.622 kg ha-1.

  1. Utilization of sweetpotato starches and flours as composites with ...

    African Journals Online (AJOL)

    Hussein

    2015-01-07

    Jan 7, 2015 ... Also, blends of wheat and sweet potato starch were developed in the ratios 80:20 ... Functional properties of wheat: sweet potato composite flour ..... 32: 115-119. Ulm SG (1988) The effect of Storage Condition on Selected.

  2. Molecular genetic analysis of grain protein content and flour ...

    Indian Academy of Sciences (India)

    Grain protein content (GPC) and flour whiteness degree (FWD) are important qualitative traits in common wheat. Quantitativetrait locus (QTL) mapping for GPC and FWD was conducted using a set of 131 recombinant-inbred lines derived fromthe cross 'Chuan 35050. ×Shannong 483' in six environmental conditions. A total ...

  3. Quality Attributes of Tapioca Meal Fortified With Defatted Soy Flour

    African Journals Online (AJOL)

    be processed to a variety of products such as soy flour, soy milk, soy yoghurt, soy .... Values are means of triplicate determinations on fresh weight basis; means ... of the sensory analysis is shown in Table 2 and it is based on the perception of.

  4. Adoption and impact of high quality bambara flour (HQBF ...

    African Journals Online (AJOL)

    Adoption and impact of high quality bambara flour (HQBF) technology in the ... consumer acceptability/quality of products, credit, availability of raw materials, and ... as a result of 12.5 per cent increase in demand for bambara-based products.

  5. Effects of submerged and anaerobic fermentations on cassava flour ...

    African Journals Online (AJOL)

    Cassava tubers for processing into cassava flour, Lafun a Nigerian locally fermented product was subjected to two different types of fermentations: submerged and anaerobic fermentation for 72 h. Physicochemical changes that occurred during fermentation and their influence on the functional, rheological and sensory ...

  6. Inclusion of sweet sorghum flour in bread formulations

    African Journals Online (AJOL)

    User

    2015-05-13

    May 13, 2015 ... Inclusion of sweet sorghum flour in bread formulations. Veronica Freitas Pires Araujo1, Wellingthon da Silva Guimaraes Junnyor1, Marco Antonio. Pereira da Silva1* ..... Revista Brasileira de Saúde e. Produção Animal.

  7. Effect of pigeon pea flour addition on the chemical, antinunutrional ...

    African Journals Online (AJOL)

    Background: Gurundi is a popular snack among the school-age children in Oyo town and it is produced by mixing wheat flour with coconut water, grated coconut and sugar. However, gurundi is a carbohydrate food which will be more beneficial to the consumers if its protein content is improved with locally available and ...

  8. Instrumental methods for analysis of some elements in flour

    International Nuclear Information System (INIS)

    Zagrodzki, P.; Dutkiewicz, E.M.; Malec, P.; Krosniak, M.; Knap, W.

    1993-10-01

    For ten various brands of flour contents of chosen (heavy) elements were determined by means of ICP, GF-AAS, PIXE and ASV/CSV methods. General performance of participating laboratories as well as pros and cons of different analytical methods were compared and discussed. (author). 6 refs, 6 figs, 7 tabs

  9. Quality of fermented cassava flour processed into placali | Koko ...

    African Journals Online (AJOL)

    Fermented cassava flour was obtained from Yace variety. Cassava roots were washed, peeled and ground. After adding cassava inoculums at 8% (m/m), the pulp was allowed to ferment for 72 hours at ambient temperature. The fermented dough was removed, squeezed and oven-dried for 48 hours at 55 °C. The dried ...

  10. Fungal contamination of produced wheat flour in West Azerbaijan, northwest of Iran

    Directory of Open Access Journals (Sweden)

    Jafar Asadzadeh

    2014-09-01

    Full Text Available Objective: To investigate fungal contamination of produced wheat flours in West Azarbaijan Province, located in the North West of Iran as wheat flour is one of the most important food and nutrient in the Iranians diet. Methods: This descriptive study was performed during March 2011 to April 2013 in flour mills of West Azerbaijan province. A total of 17 samples of produced wheat flour in Azerbaijan Province of Iran were tested for mold contamination based on Iran National Standard Method No. 2393. Results: Presence of molds in all collected 151 samples from flour factories of Azerbaijan Province were at the limit based on Iranian national standard. Conclusions: The obtained results showed that the process of flour production was hygienic quietly. Bread is staple ingredient of Iranian diet, and strict control on its processing of wheat flour, maintenance and distribution results nonpolluting or reduction of fungal contamination. Objective: To investigate fungal contamination of produced wheat flours in West Azarbaijan Province, located in the North West of Iran as wheat flour is one of the most important food and nutrient in the Iranians diet. Methods: This descriptive study was performed during March 2011 to April 2013 in flour mills of West Azerbaijan province. A total of 17 samples of produced wheat flour in Azerbaijan Province of Iran were tested for mold contamination based on Iran National Standard Method No. 2393. Results: Presence of molds in all collected 151 samples from flour factories of Azerbaijan Province were at the limit based on Iranian national standard. Conclusions: The obtained results showed that the process of flour production was hygienic quietly. Bread is staple ingredient of Iranian diet, and strict control on its processing of wheat flour, maintenance and distribution results nonpolluting or reduction of fungal contamination.

  11. Determination of trace and toxic elements in Koran rice CRM by INAA, ICP and AAS

    International Nuclear Information System (INIS)

    Yong Sam Chung; Young Ju Chung; Kyung Haeng Cho; Joung Hae Lee

    1997-01-01

    Trace and toxic elements in Certified Reference Material (CRM) made of Korean rice at the Korea Research Institute of Standards and Science have been analyzed by Instrumental Neutron Activation Analysis (INAA). Data intercomparison from the measurement with those of Atomic Absorption Spectrometry (AAS) and Induced Coupled Plasma Spectrometry (ICPS) has been studied. The powdered samples were sterilized at 1.5 x 10 6 rad in the bottles using a 60 Co source after sieving and spiking to specific elements such as As, Cd, Cr, Cu and Hg and then the homogeneity of samples was assessed. Rice flour (SRM 1568a) and standard solutions made by the National Institute of Standards Technology (NIST) were used to construct the calibration curves for the INAA and the chemical methods, respectively. The uncertainties and concentration of constituent elements were determined and the possibility of their use for analytical quality control was considered. (author)

  12. Instrumental and sensory properties of pea protein-fortified extruded rice snacks.

    Science.gov (United States)

    Philipp, Claudia; Buckow, Roman; Silcock, Pat; Oey, Indrawati

    2017-12-01

    Characteristic attributes of pea-protein fortified, extruded rice snacks were evaluated by mechanical, acoustic and descriptive sensory analysis. The addition of pea protein isolate (0 to 45% (w/w)) to rice flour and extruder screw speed strongly affected the expansion behaviour and therefore, textural attributes of extruded snack products. The sensory panel described the texture of highly expanded extrudates as crisp, while low expanded extrudates were perceived as hard, crunchy and non-crisp. Results of the instrumental and sensory analysis were compared and showed a high correlation between mechanical and sensory hardness (r=0.98), as well as acoustic and sensory crispness (r=0.88). However, poor and/or negative correlations between acoustic and sensory hardness and crunchiness were observed (r=-0.35 and -0.84, respectively). Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Effect of processing techniques on nutritional composition and antioxidant activity of fenugreek (Trigonella foenum-graecum) seed flour

    OpenAIRE

    Pandey, Hemlata; Awasthi, Pratima

    2013-01-01

    Fenugreek (Pusa Early Bunching) seeds were processed by using different processing methods viz. soaking, germination and roasting. Raw and processed fenugreek seed flours were analyzed for nutritional composition, anti- nutritional, and antioxidant activity. Raw fenugreek seed flour contained higher amount of dietary fiber (45.4 %) followed by 41.7 % in soaked seed flour, 40.9 % in roasted fenugreek seed flour and 31.3 % in germinated fenugreek seed flour. Processing of fenugreek seeds improv...

  14. Influence of rice straw-based polyols on the morphology, thermal ...

    African Journals Online (AJOL)

    replacement of rice straw-based polyols produced closed cell structures suitable for insulation material as revealed in Scanning electron microscope images. Higher percentage of rice straw-based polyols replacement will trigger cell wall structure rapturing that will deteriorate the properties of polyurethane foam.

  15. Preparation and characterization of rice hull silica products

    International Nuclear Information System (INIS)

    Quirit, Leni L.; Llaguno, Elma C.; Pagdanganan, Fernando C.; Hernandez, Karen N.

    2008-01-01

    Rice hull is an abundant agricultural waste material which could be a renewable energy source when combusted. The combustion residue (called rice hull ash or RHA) contains a significant amount (20% of the hull) of potentially high grade silica. Silica gels prepared from rice hull were found to have properties comparable to two commercial desiccant silica gels (Blue Merck and FNG-A) in terms of chemical and amorphous structure, surface area, desiccant characteristics, microstructure and heats of adsorption. These properties were determined from water vapor adsorption measurements, electron microscopy, and from infrared and x-ray diffraction spectra. The acid treated rice hull gels were found to have fewer elemental impurities detected by qualitative x-ray fluorescence, compared to the commercial gels. Thermogravimetric analysis (TGA) data showed that this technique can also be used to indirectly compare impurity levels in the samples, in terms of the amorphous to crystalline phase transition. Using an improved acid treatment method, a silica gel sample was prepared from rice hull and compared to three commercial chromatographic silica gels using quantitative elemental x-ray fluorescence analysis. Elemental levels in the rice hull gel were within the range of levels or close to the detection limits of corresponding elements in the chromatographic gels. Water vapor adsorption, x-ray diffraction, infrared spectroscopy and scanning electron microscopy showed that the rice hull gel was similar to the commercial chromatographic silica gel Davison 12. Zeolites are crystalline aluminosilicates used as molecular sieves for purification and catalytic purposes. Zeolites X and Y were synthesized from rice hull silica gel and aluminum hydroxide. For comparison, controls were synthesized from commercial silica gel. The samples and controls exhibited characteristics infrared peaks corresponding to the vibrations of the TO 4 (T=Si, Al) of the zeolite framework. The x

  16. Gasification of rice husks

    Energy Technology Data Exchange (ETDEWEB)

    Marzetti, P. (ENEA, Rome (Italy). Dipt. Fonti Alternative e Risparmio Energetico)

    The paper outlines the thermochemical processes and equipment involved in the gasification of rice husks. An assessment is made of the feasibility (availability, technology requirements, economics of production and marketing) of this renewable energy source. Results, reported here in tabular form, of experimental trials at an Italian pilot plant (producing, with the use of 165 kg/h of rice husks, 350,000 kcal/h of gas with a conversion yield of 70%) indicated good feasibility. More research is required to improve the combustion qualities of the final product.

  17. Functional and sensory properties of cookies prepared from wheat flour supplemented with cassava and water chestnut flours

    Directory of Open Access Journals (Sweden)

    Anu Bala

    2015-12-01

    Full Text Available Functional and sensory properties of cookies prepared by supplementing different proportions of cassava flour (CF and water chestnut flour (WCF blends (0–100% to wheat flour (WF were studied. Seven formulations of cookies were prepared from (a Control (100% WF, (b 30% WF, 35% WCF and 35% CF, (c 27% WF, 37.5% WCF and 37.5% CF, (d 20% WF, 40% WCF and 40% CF, (e 15% WF, 42.5% WCF and 42.5% CF, (f 10% WF, 45% WCF and 45% CF, and (g 0% WF, 50% WCF and 50% CF. Cookies were subjected to physical analysis (cookie diameter, cookie thickness, spread ratio, bulk volume, bulk density, breaking strength, and color analysis and evaluated for consumer acceptance by descriptive sensory analysis. Cookies prepared from water chestnut and cassava flour had low moisture content (5.63%, low fat (24.87%, higher spread ratio (8.148, decreased L, a and b values (dark color, and low breaking strength than control ones. Sensory evaluation established that cookies prepared from 50% WCF and 50% CF were more acceptable than cookies prepared from other formulations.

  18. Effect of 60Co γ-rays irradiation on rice straw fibre structure and enzyme hydrolyzation

    International Nuclear Information System (INIS)

    Chen Jingping; Li Wenge; Peng Ling; Wang Keqin; Xiong Xingyao

    2008-01-01

    The effect of improving enzyme hydrolyze of rice straw was estimated with treating dry rice straw and raw fiber by 60 Co γ-rays irradiation. the water-soluble deoxidize carbohydrate and total carbohydrate of 60 Co γ-rays irradiated rice straw and raw fibres were measured by DNS method and vitrol-phenol method. The changes of deoxidize carbohydrate groups of irradiated hydrolyzing rice straw were analyzed by gas chromatography. The organism structures of irradiated rice straw were scanned by electron microscope, the results showed that 1000-1500 kGy 60 Co γ-irradiation doses effectively destroyed rice straw's organism structures, especially the silicon crystal structures, and along with irradiation doses increased the breakage degree enlarged significantly. The contents of the water-soluble deoxidize carbohydrate and total carbohydrate of rice straw increased significantly. treated by both irradiation and enzyme, the cellulose transform rate of rice straw was 88.7%, which is better than that only treated by 60 Co γ-irradiation or enzyme. The content of water-solubility deoxidize carbohydrate of the treated rice straw was 214.4 mg/g and the total carbohydrate of straw was 758.5 mg/g. The contents of mannose, galactose, glucose, arabinose and xylose increased significantly, among those carbohydrate, the glucose's increment was the largest and account for 62.64%, and mannose's increments was the second. The contents of lignin of the rice straw were not influenced obviously by irradiation treatment. (authors)

  19. Development of functional cookies with wheat flour, banana flour (Musa paradisiaca, sesame seeds (Sesamum indicum and storage stability

    Directory of Open Access Journals (Sweden)

    Angélica Loza

    2017-01-01

    Full Text Available Functional cookies were developed using banana flour (BF and sesame seeds (SS. Protein, moisture and ash w ere determined , and farinographic analyzes of flours were performed. The attributes odor, color, flavor, crunch and the IC 50 value of the cookies were determined. The results were evaluated with the C omplete R andomized D esign and the Tukey and Kruskall Wallis test. The flour mixture presented higher protein (10.2%, humidity (14.40 % than BF, but lower than wheat flour. C ookies with 10 % , 15 % and 20% BF and 8% sesame seeds were selected. Flours with 10 % , 15 % and 20% BF had similar values of water absorption (≤ 60% and different values statistically (p ≤ 0.05 for development time, mass stability and degree of softening. Cook ies with 20% BF and 8% SS (SC had IC 50 = 17.52 ± 0.25 mg / mL, with moisture, protein, fat, crude fiber, ash and carbohydrates of 1.88 % , 10.65 % , 22.01 % , 1.01 % , 1.54 % and 62.91%, respectively. SC did not present sensorial statistical differences (p ≤ 0.05 the first two months, the third month decreased the acceptability of the crunch and flavor. In ninety days of storage the IC50 value (29.07 ± 0.92 mg / mL, reducing sugars (1.20 ± 0.02 and pH (5.24 ± 0.01 decreased and humidity (3.83 ± 0.03 increased.

  20. Study of the effect of ionizing radiation on composites of wood flour in polypropylene matrix using barium titanate as coupling agent

    International Nuclear Information System (INIS)

    Ulloa, Maritza Eliza Perez

    2007-01-01

    The purpose of this work was to study the effects of ionizing radiation on the properties of wood flour composites in polypropylene matrix, using barium titanate as a coupling agent and the reactive monomer tripropylene glycol diacrylate (TPDGA). An electron accelerator was used in the study as the radiation source. The physical properties of virgin compounds and of the polypropylene/wood flour composite, with and without barium titanate and TPDGA addition, were investigated. The composites were developed from the load treatment, which first consisted of incorporating additives to the wood flour reinforcement and after that, the fusion process of polypropylene and composite mixing in a 'calander'. Subsequently, the samples to be irradiated and submitted to thermal and mechanical assays were molded by injection. The mechanical properties (hardness, impact resistance and molten fluidity index (MFI)), as well as the thermal properties (HDT and Vicat) of the composites were determined. The investigated compositions consisted of polypropylene/wood flour, polypropylene/wood flour with barium titanate and polypropylene/wood flour with barium titanate and TPDGA, using different wood flour concentrations of 10 por cent, 15 por cent and 20 por cent in the polypropylene matrix. The samples were separated in groups and irradiated to doses of 10 kGy and 20 kGy in the samples of the essays of traction. Besides these doses, it was also used doses of 15 kGy and 25 kGy to be observed the behavior of the sample of the sample due to the increase of the radiation. These doses were chosen to show that with low doses the composite material presents reticulation, what represents a viable commercial option. There was a reduction of the flow rate for the composites containing wood flour, being this reduction more effective in the presence of TiBa. The superficial treatment using TPDGA monomer influence in the composite samples because it acted as a plastic additive becoming the sample

  1. Heat-treated hull flour does not affect iron bioavailability in rats.

    Science.gov (United States)

    Martino, Hércia Stampini Duarte; Carvalho, Ariela Werneck de; Silva, Cassiano Oliveira da; Dantas, Maria Inês de Souza; Natal, Dorina Isabel Gomes; Ribeiro, Sônia Machado Rocha; Costa, Neuza Maria Brunoro

    2011-06-01

    In this study the chemical composition and iron bioavailability of hull and hull-less soybean flour from the new cultivar UFVTN 105AP was evaluated. The hemoglobin depletion-repletion method was used in Wistar rats. Soybean hull flour presented 37% more total dietary fiber and higher content of iron than hull-less soybean flour. The phytate:iron molar ratio, however, was 2-fold lower in the soybean hull flour in compared to the hull-less soybean flour. Animals fed soybean hull flour presented hemoglobin gains similar to those of the control diet group (p > 0.05). The Relative Biological Values of hull and hull-less soybean flour were 68.5% and 67.1%, respectively, compared to the control group. Heat-treated soybean hull flour (150 degrees C/30 minutes) showed high content of iron and low phytate, which favors the iron bioavailability. Thus, the soybean hull flour is a better source of dietary fiber and iron than hull-less soybean flour at comparable bioavailabilities.

  2. Rheological, thermo-mechanical, and baking properties of wheat-millet flour blends.

    Science.gov (United States)

    Aprodu, Iuliana; Banu, Iuliana

    2015-07-01

    Millet has long been known as a good source of fiber and antioxidants, but only lately started to be exploited by food scientists and food industry as a consequence of increased consumer awareness. In this study, doughs and breads were produced using millet flour in different ratios (10, 20, 30, 40, and 50%) to white, dark, and whole wheat flour. The flour blends were evaluated in terms of rheological and thermo-mechanical properties. Fundamental rheological measurements revealed that the viscosity of the flour formulations increases with wheat flour-extraction rate and decreases with the addition of millet flour. Doughs behavior during mixing, overmixing, pasting, and gelling was established using the Mixolab device. The results of this bread-making process simulation indicate that dough properties become critical for the flour blends with millet levels higher than 30%. The breads were evaluated for volume, texture, and crumb-grain characteristics. The baking test and sensory evaluation results indicated that substitution levels of up to 30% millet flour could be used in composite bread flour. High levels of millet flour (40 and 50%) negatively influenced the loaf volume, crumb texture, and taste. © The Author(s) 2014.

  3. Wheat-water chestnut flour blends: effect of baking on antioxidant properties of cookies.

    Science.gov (United States)

    Shafi, Musarat; Baba, Waqas N; Masoodi, Farooq Ahmad; Bazaz, Rafiya

    2016-12-01

    Proximate composition, mineral content, functional, pasting and antioxidant properties of water chestnut flour (WCF) were compared with refined wheat flour. WCF showed higher phenolic (4.25 gGAE/1000 g), flavonoid (1.92 g QE/1000 g) and mineral content (K, Mg, Zn, Cu) than wheat flour. WCF showed greater retrogradation tendency but lower peak viscosity than wheat flour. Wheat flour - WCF blends and cookies were evaluated for water activity, physical & textural properties. Water activity of cookies decreased significantly (0.415-0.311) with increase in level of WCF in wheat flour. Total phenolic content, flavonoid content and antioxidant activity (DPPH• scavenging capacity, FRAP) of WCF - wheat flour blends as well as their cookies was also determined. Baking led to a greater increase in DPPH• scavenging capacity of WCF cookies (33.8%) than WF cookies (25%). Baking had a similar effect on FRAP value. Wheat flour cookies showed a decrease of 51%, and 62% while WCF cookies showed a decrease of 36%, and 34% in TPC and TFC values respectively. WCF cookies thus showed better retention of antioxidant activities suggesting greater stability of WC phenolics than wheat phenolics. Sensory analysis showed cookies made from water chestnut (100%) had fair acceptability due to their characteristic flavor. Thus, water chestnut flour serves both as a gluten free as well as antioxidant rich flour for production of cookies.

  4. Evaluation of dry heat treatment of soft wheat flour for the production of high ratio cakes.

    Science.gov (United States)

    Keppler, S; Bakalis, S; Leadley, C E; Sahi, S S; Fryer, P J

    2018-05-01

    An accurate method to heat treat flour samples has been used to quantify the effects of heat treatment on flour functionality. A variety of analytical methods has been used such as oscillatory rheology, rheomixer, solvent retention capacity tests, and Rapid Visco Analysis (RVA) in water and in aqueous solutions of sucrose, lactic acid, and sodium carbonate. This work supports the hypothesis that heat treatment facilitates the swelling of starch granules at elevated temperature. Results furthermore indicated improved swelling ability and increased interactions of flour polymers (in particular arabinoxylans) of heat treated flour at ambient conditions. The significant denaturation of the proteins was indicated by a lack of gluten network formation after severe heat treatments as shown by rheomixer traces. Results of these analyses were used to develop a possible cake flour specification. A method was developed using response surfaces of heat treated flour samples in the RVA using i) water and ii) 50% sucrose solution. This can uniquely characterise the heat treatment a flour sample has received and to establish a cake flour specification. This approach might be useful for the characterisation of processed samples, rather than by baking cakes. Hence, it may no longer be needed to bake a cake after flour heat treatment to assess the suitability of the flour for high ratio cake production, but 2 types of RVA tests suffice. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. Microbiological Control of Flour-Manufacture: Dissemination of Mycotoxins Producing Fungi in Cereal Products

    Directory of Open Access Journals (Sweden)

    T.D. Doolotkeldieva

    2010-01-01

    Full Text Available Wheat grain and its products are widely consumed as fodder and basic daily food stuffs in Kyrgyzstan. Mycobiota is known to produce hazardous effects to a consumer since it produces mycotoxins. Henceforth, mycobiota starting from the field stage to flour, grain and flour samples were selected for mycological analysis from eight sites of flour manufacture: grain stored in storehouses before milling, mechanically cleaned grain, washed grain, grain dried and prepared for mill, roughly-milled flour, first grade flour and high grade flour. The samples were analyzed using classical mycological and immunoassay methods in order to detect mycotoxins producing fungi species. We isolated overall 27 species belonging to 7 genera. Mycotoxins producing species like Aspergillus flavus, Aspergillus ochraceus and Penicillium cyclopium were detected in the stored grains and in mechanically-cleaned grains. The species of Penicillium, Alternaria and Fusarium genera dominated in roughly-milled flour samples, so this site of flour manufacture still has a risk and danger of contamination with mycotoxins producing fungus. Only the final product i.e. the high grade flour lacked any fungal contamination. We recommend to scrutinize flour samples at the last stages of processing, particularly in the mills like B1, C1 and C4.

  6. Changes in protein and starch digestibility in sorghum flour during heat-moisture treatments.

    Science.gov (United States)

    Vu, Thanh-Hien; Bean, Scott; Hsieh, Chao-Feng; Shi, Yong-Cheng

    2017-11-01

    Heat-moisture treatment (HMT) has been used to modify properties of sorghum starches. However, information is limited on the effects of HMT on the digestibility of starch and the concurrent changes in protein in sorghum flour. The objectives of this research were to identify heat-moisture conditions to increase the resistant starch (RS) content of sorghum flour and investigate changes in sorghum proteins and starch structure. Sorghum flours with different moisture contents (0, 125, 200, and 300 g kg -1 w.b.) were heated at three temperatures (100, 120 and 140 °C) and times (1, 2 and 4 h). HMT of sorghum flour increased its RS level. The flour treated at 200 g kg -1 moisture and 100 °C for 4 h had a high RS content (221 g kg -1 vs. 56 g kg -1 for the untreated flour). Starch was not gelatinized when sorghum flours heated at moisture content of 200 g kg -1 or below. Sorghum protein digestibility and solubility decreased during HMT. The increase in RS of sorghum flour upon HMT was attributed to enhanced amylose-lipid complexes and heat induced structural changes in its protein fraction. HMT can be used to increase RS content in sorghum flour without gelatinizing its starch, thereby providing sorghum flour with unique food applications. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  7. Development and characterization of ice cream enriched with different formulations flour jabuticaba bark (Myrciaria cauliflora

    Directory of Open Access Journals (Sweden)

    Marina Leopoldina Lamounier

    2015-09-01

    Full Text Available The aim was to perform the physicochemical characterization of the flour from the bark of jabuticaba, as well as developing three ice cream formulations (enriched with 0, 5 and 10% of this flour and evaluate the physicochemical and sensory characteristics. Fruits were pulped, the peels were dehydrated, dried, crushed and sieved to obtain the flour that was analyzed for physicochemical levels. Then, three ice cream formulations were developed (with 0%, 5% and 10% flour from the bark of jabuticaba, considering the physicochemical and sensorial characteristics. The results showed that the flour from the bark of jabuticaba showed high ash and fiber. The ice creams showed differences (p < 0.05 for pH, titratable acidity, moisture and ash due to the incorporation of flour from the bark of jabuticaba. The only attribute that did not differ (p > 0.05 was soluble solid. The overrun was ecreasing with increasing addition of flour. In the sensory evaluation, only attributes that differ (p < 0.05 were flavor, texture and overall appearance of the formulation with 10% flour from the bark of jabuticaba, which represents that incorporation of 5% flour from the bark of jabuticaba did not affect the cceptability of ice creams. It can be concluded that the enrichment of blemish bark flour provides edible ice increase in nutritional value without affecting the sensory characteristics at the level of 5% added.

  8. Technological and nutritional aspect of different hemp types addition: Comparison of flour and wholemeal effect

    Directory of Open Access Journals (Sweden)

    Marie Hrušková

    2015-01-01

    Full Text Available Addition of non-traditional raw-materials and flours into wheat flour follows contemporary trend of manufacturing nutritionally healthier fermented bakery products. Aim of the study follows this tendency, evaluating nutritional improvement of composite flour and baking potential of prepared wheat-hemp flour composites. Hemp products addition significantly increased both protein and dietary fibre contents. Between five types of hemp flour, differences were observed according to incorporated amount (wheat flour substitution from 5% to 20%. In composites containing 20% of hemp flour and dehulled hemp wholemeal, protein content increased to 14.9% and to 15.7%, respectively (compared to 12.5% proteins in control wheat flour. Dietary fibre content change was governed unequivocally by addition level for both hemp flour and hemp wholemeal. Hemp wholemeal affected the solvent retention capacity (SRC profile of the wheat flour used in a broader extent than hemp flour done, interacting moreover with addition level applied. Significant diminishing was measured for the sucrose and the lactic acid SRC, which describe physicochemical stage of starch and proteins in prepared composites. Addition of 5% and 20% of dehulled hemp wholemeal decreased the formed SRC from 112.0% to 102.3% and to 64.1%, and the latter SRC from 182.6% to 108.0 and to 78.3%, respectively. Smaller bread volume and worse shape were evaluated as the amount of hemp flour gradually increased; wholemeal form had more or less a positive effect. Correspondingly to that, crumb firmness measured by penetration test was found approximately half for hemp flour composite bread than for the hemp wholemeal ones.

  9. Sorbents based on carbonized rice peel

    International Nuclear Information System (INIS)

    Mansurova, R. M.; Taipova, R. A.; Zhylybaeva, N. K.; Mansurov, Z. A.; Bijsenbaev, M. A.

    2004-01-01

    The process receiving of sorbents based on carbonized rice peel (RP) was received and their sorption properties were investigated. Processing carbonization of samples leading on station, this was developed in laboratory of hybrid technology. Carbonization of samples was realized in nitric atmosphere on 400-8000 deg. C. On raising temperature of carbonization content of carbon in samples is rice, hydrogen and oxygen is reduce as a result isolation of volatility products is discover. The samples carbonized on 650 deg. C (910 m 2 /g) owners with maximum removed surface is discover. On carbonization temperature 600-800 deh. C the sorption of ions, which carbonized by sorbents based on rice peel is run to 95-100 %. Electron-microscopic investigation of samples leaded on EM-125 mechanism by accelerating pressure 100 kV. From electron-microscopic print of original samples of RP it is evident, that sample consists of carbonic fractions of different species: carbonic fiber of rounded fractions, fractions of ellipsoid form and of more thickly carbonic structure. Increasing sizes of pores and modification structure of synthesized sorbent is occur during carbonization process. The RP-samples, which carbonized by 650 deg. C has the higher specific surface. Samples consist of thin carbonic scum and reducing specific surface, by higher temperature

  10. Rice as commodity and anti-commodity

    NARCIS (Netherlands)

    Richards, P.

    2016-01-01

    On the Upper West Africa coast rice belongs to two species — African rice (Oryza glaberrima Steud.) and Asian rice (Oryza sativa L.). African rice was domesticated in the region, perhaps three millennia ago, from a presumed wild ancestor, O. barthii. Asian rice was introduced via trans-Saharan

  11. Diseases of wild rice

    Science.gov (United States)

    Diseases are much more pronounced in cultivated wild rice than in natural stands, most likely due to the narrower genetic base of the populations, plant stress due to high planting density and floodwater removal prior to harvest, and high relative humidity in the plant canopy. Yield losses occur as ...

  12. Promising rice mutants

    International Nuclear Information System (INIS)

    Hakim, L.; Azam, M.A.; Miah, A.J.; Mansur, M.A.; Akanda, H.R.

    1988-01-01

    Two induced mutants namely, Mut NS 1 (tall) and Mut NS 5 (semi-dwarf) derived from rice variety Nizersail were evaluated for various agronomic characters at four locations in Bangladesh. Both the mutants matured about three weeks earlier and yielded significantly higher than the parent variety Nizersail. (author). 3 tabs., 9 refs

  13. Quality characteristics of northern-style Chinese steamed bread prepared from soft red winter wheat flours with waxy wheat flour substitution

    Science.gov (United States)

    Quality characteristics of Chinese steamed bread (CSB) prepared from two soft red winter (SRW) wheat flours blended with 0-30% waxy wheat flour (WWF) were determined to estimate the influence of starch amylose content. The increased proportion of WWF in blends raised mixograph absorption with insign...

  14. Hard Winter Wheat and Flour Properties in Relation to Breadmaking Quality of Straight-dough Bread: Flour Particle Size and Bread Crumb Grain

    Institute of Scientific and Technical Information of China (English)

    S H Park; O K Chung; P A Seib

    2006-01-01

    Samples of 12 hard winter wheats and their flours that produced breads varying in crumb grain scores were studied for 38 quality parameters including: wheat physical and chemical characteristics; flour ash and protein contents, starch damage,swelling power, pasting characteristics, and flour particle size distribution; dough properties determined by a mixograph; and breadmaking properties for pup loaves (100g flour). Only two parameters, the protein content of wheat and the granulation of flour, showed significant correlations with bread crumb grain scores. Protein content of wheat ranging 12.9%~ 14.5% determined by an NIR method showed a weak inverse relationship (r =-0.61, p < 0.05) with bread crumb grain score. Flour particle size distribution measured by both Alpine Air Jet Sieve and NIR methods revealed that the weight wt % of particles less than 38μ m in size and representing 9.6%~ 19.3% of the flour weights was correlated positively (r =0.78, p < 0.01) with crumb grain score, whereas wt % of flour particles larger than 125μm had an inverse relationship (r =-0.60, p<0.05) with crumb grain score.

  15. White Whole-Wheat Flour Can Be Partially Substituted for Refined-Wheat Flour in Pizza Crust in School Meals without Affecting Consumption

    Science.gov (United States)

    Chan, Hing Wan; Burgess Champoux, Teri; Reicks, Marla; Vickers, Zata; Marquart, Len

    2008-01-01

    Objectives: Recent dietary guidance recommends that children consume at least three servings of whole-grains daily. This study examined whether white whole-wheat (WWW) flour can be partially substituted for refined-wheat (RW) flour in pizza crust without affecting consumption by children in a school cafeteria. Methods: Subjects included first to…

  16. Protein interactions during flour mixing using wheat flour with altered starch.

    Science.gov (United States)

    Wang, Xiaolong; Appels, Rudi; Zhang, Xiaoke; Diepeveen, Dean; Torok, Kitti; Tomoskozi, Sandor; Bekes, Ferenc; Ma, Wujun; Sharp, Peter; Islam, Shahidul

    2017-09-15

    Wheat grain proteins responses to mixing and thermal treatment were investigated using Mixolab-dough analysis systems with flour from two cultivars, Ventura-26 (normal amylose content) and Ventura-19 (reduced amylose content). Size exclusion high performance liquid chromatography (SE-HPLC) and two-dimensional gel electrophoresis (2-DGE) analysis revealed that, stress associated and metabolic proteins largely interacted with dough matrix of Ventura-26 after 26min (56°C); gliadins, avenin-like b proteins, LMW-GSs, and partial globulins showed stronger interactions within the dough matrix of Ventura-26 at 32min/C3 (80°C), thereafter, however, stronger protein interactions were observed within the dough matrix of Ventura-19 at 38min/C4 (85°C) and 43min (80°C). Thirty-seven proteins associated with changes in dough matrix due to reduced amylose content were identified by mass spectrometry and mainly annotated to the chromosome group 1, 4, and 6. The findings provide new entry points for modifying final product attributes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Comparison of nutritional properties of Stinging nettle (Urtica dioica) flour with wheat and barley flours.

    Science.gov (United States)

    Adhikari, Bhaskar Mani; Bajracharya, Alina; Shrestha, Ashok K

    2016-01-01

    Stinging nettle (Urtica dioica. L) is a wild, unique herbaceous perennial flowering plant with Stinging hairs. It has a long history of use as a food sources as a soup or curries, and also used as a fiber as well as a medicinal herb. The current aim was to analyze the composition and bioactive compounds in Nepalese Stinging nettle. Chemical analysis showed the relatively higher level of crude protein (33.8%), crude fiber (9.1%), crude fat (3.6%), total ash (16.2%), carbohydrate (37.4%), and relatively lower energy value (307 kcal/100 g) as compared to wheat and barley flours. Analysis of nettle powder showed significantly higher level of bioactive compounds: phenolic compounds as 129 mg Gallic acid equivalent/g; carotenoid level 3497 μg/g; tannin 0.93 mg/100 g; anti-oxidant activity 66.3 DPPH inhibition (%), as compared to wheat and barley. This study further established that nettle plants as very good source of energy, proteins, high fiber, and a range of health benefitting bioactive compounds.

  18. Investigating differences in light stable isotopes between Thai jasmine rice and Sungyod rice

    Science.gov (United States)

    Kukusamude, C.; Kongsri, S.

    2017-10-01

    We report the differences in light stable isotopes between two kinds of Thai rice (Thai jasmine and Sungyod rice). Thai jasmine rice and Sungyod rice were cultivated in the northeast and the south of Thailand. Light isotopes including 13C, 15N and 18O of Thai jasmine rice and Sungyod rice samples were carried out using isotope ratio mass spectrometry (IRMS). Thai jasmine rice (Khao Dawk Mali 105) was cultivated from Thung Kula Rong Hai area, whereas Sungyod rice was cultivated from Phathalung province. Hypothesis testing of difference of each isotope between Thai jasmine rice and Sungyod rice was also studied. The study was the feasibility test whether the light stable isotopes can be the variables to identify Thai jasmine rice and Sungyod rice. The result shows that there was difference in the isotope patterns of Thai jasmine rice and Sungyod rice. Our results may provide the useful information in term of stable isotope profiles of Thai rice.

  19. Optimization of corn, rice and buckwheat formulations for gluten-free wafer production.

    Science.gov (United States)

    Dogan, Ismail Sait; Yildiz, Onder; Meral, Raciye

    2016-07-01

    Gluten-free baked products for celiac sufferers are essential for healthy living. Cereals having gluten such as wheat and rye must be removed from the diet for the clinical and histological improvement. The variety of gluten-free foods should be offered for the sufferers. In the study, gluten-free wafer formulas were optimized using corn, rice and buckwheat flours, xanthan and guar gum blend as an alternative product for celiac sufferers. Wafer sheet attributes and textural properties were investigated. Considering all wafer sheet properties in gluten-free formulas, better results were obtained by using 163.5% water, 0.5% guar and 0.1% xanthan in corn formula; 173.3% water, 0.45% guar and 0.15% xanthan gum in rice formula; 176% water, 0.1% guar and 0.5% xanthan gum in buckwheat formula. Average desirability values in gluten-free formulas were between 0.86 and 0.91 indicating they had similar visual and textural profiles to control sheet made with wheat flour. © The Author(s) 2015.

  20. Radiation disinfestation of Basmati rice

    International Nuclear Information System (INIS)

    Rao, V.S.; Gholap, A.S.; Adhikari, H.R.; Nair, P.M.

    1994-01-01

    Effect of low dose γ-radiation on prepackaged Basmati rice was studied in order to achieve disinfestation of rice. Basmati rice procured from local market was repacked in 1 kg pouches made from high density polyethylene (HDP) and biaxially oriented polypropylene: low density polyethylene (BOPP/LDP) laminate and irradiated at doses from 0.25-1.0 kGy. Within one month of storage at room temperature, unirradiated (control) Basmati rice developed heavy infestation. No infestation was observed in any of the irradiated samples even at 0.25 kGy and the rice could be stored for 6 months in a clean state. Irradiation (at 0.25 kGy) did not alter the moisture content of the rice. Likewise, no significant change was noted due to irradiation in the functional properties of rice such as swelling index and water absorption and in total volatile components responsible for flavour of Basmati rice. In organoleptic evaluation, no significant difference was found between the acceptability of irradiated (0.25 kGy) and control rice. These results are significant in view of the high export potential of Basmati rice and the transit losses at present due to infestation. (author). 24 refs., 5 tabs., 1 fig