WorldWideScience

Sample records for ribeye top loin

  1. Retail yields and palatability evaluations of individual muscles from wet-aged and dry-aged beef ribeyes and top sirloin butts that were merchandised innovatively.

    Science.gov (United States)

    Smith, A M; Harris, K B; Griffin, D B; Miller, R K; Kerth, C R; Savell, J W

    2014-05-01

    Paired ribeyes (n=24) and top sirloin butts (n=24) were dry-aged or wet-aged for 35 days before being merchandised as individual muscles: M. spinalis thoracis, M. longissimus thoracis, M. gluteobiceps, and M. gluteus medius. Wet-aged subprimals had greater saleable yields than dry-aged. Dry-aged M. spinalis thoracis and M. gluteobiceps received lower consumer overall like and flavor ratings than did wet-aged; interior muscles - M. longissimus thoracis and M. gluteus medius - did not differ. Trained panelists found higher musty and putrid flavors for dry-aged muscles closer to exterior surface. These flavors may have contributed to lower consumer overall like and flavor ratings for dry-aged M. spinalis thoracis and M. gluteobiceps. Using innovative styles to cut beef allows for greater merchandising options. However, development of undesirable flavor characteristics may be more pronounced when exterior muscles - M. spinalis thoracis and M. gluteobiceps - are exposed during dry-aging to extreme conditions and are consumed individually. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Effects of extended aging and modified atmospheric packaging on beef top loin steak color.

    Science.gov (United States)

    English, A R; Mafi, G G; VanOverbeke, D L; Ramanathan, R

    2016-04-01

    The objective of this study was to evaluate the effects of extended aging and modified atmospheric packaging on beef LM color. Using a randomized complete block design, each beef longissimus lumborum muscle ( = 10; USDA Choice, 3 d postmortem) was equally divided into 3 sections and randomly assigned to 1 of 3 aging periods (21, 42, or 62 d at 2°C). After respective aging, each loin section was cut into four 2.5-cm-thick steaks and randomly assigned to 1 of 3 packaging types (PVC, HiOx-MAP [80% oxygen and 20% carbon dioxide], or CO-MAP [0.4% carbon monoxide, 69.6% nitrogen, and 30% carbon dioxide]). The steaks were displayed under continuous fluorescent lighting for 6 d, and surface color was determined daily using a HunterLab Miniscan XE Plus spectrophotometer and a visual panel. The fourth steak was used to characterize oxygen consumption (OC), lipid oxidation, and metmyoglobin reducing activity (MRA) on 21, 42, and 62 d (before display). On d 6 display, MRA, OC, and lipid oxidation also were measured. An increase in aging time decreased ( packaging × display time interaction ( packaging types on d 6. At all aging periods, steaks packaged in CO-MAP had greater ( packaged in HiOx-MAP had the least MRA ( packaged in CO-MAP and displayed for 6 d. However, steaks packaged in HiOx-MAP and displayed 6 d had greater ( packaged in HiOx-MAP had a lower ( packaged in PVC and HiOx-MAP when aged for 21 d and displayed 6 d. The results indicate that extended aging is detrimental to color stability when packaged in PVC and HiOx-MAP. However, steaks in CO-MAP had stable red color during display. Decreased color stability in PVC and HiOx-MAP could be associated, in part, with decreased MRA and OC.

  3. Loin pain hematuria syndrome.

    Science.gov (United States)

    Taba Taba Vakili, Sahar; Alam, Tausif; Sollinger, Hans

    2014-09-01

    Loin pain hematuria syndrome is a rare disease with a prevalence of ∼0.012%. The most prominent clinical features include periods of severe intermittent or persistent unilateral or bilateral loin pain accompanied by either microscopic or gross hematuria. Patients with loin pain hematuria syndrome initially present with hematuria, flank pain, or most often both hematuria and flank pain. Kidney biopsies from patients with loin pain hematuria typically reveal only minor pathologic abnormalities. Further, loin pain hematuria syndrome is not associated with loss of kidney function or urinary tract infections. Loin pain hematuria syndrome-associated hematuria and pain are postulated to be linked to vascular disease of the kidney, coagulopathy, renal vasospasm with microinfarction, hypersensitivity, complement activation on arterioles, venocalyceal fistula, abnormal ureteral peristalsis, and intratubular deposition of calcium or uric acid microcrystals. Many patients with loin pain hematuria syndrome also meet criteria for a somatoform disorder, and analgesic medications, including narcotics, commonly are used to treat loin pain hematuria syndrome-associated pain. Interventional treatments include renal denervation, kidney autotransplantation, and nephrectomy; however, these methods should be used only as a last resort when less invasive measures have been tried unsuccessfully. In this review article, we discuss and critique current clinical practices related to loin pain hematuria syndrome pathophysiology, diagnosis, treatment, and prognosis. Copyright © 2014 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  4. Cross-Cultural Consumer Acceptability and Purchase Intent of Forage-Finished Rib-Eye Steaks.

    Science.gov (United States)

    Torrico, Damir Dennis; Wardy, Wisdom; Pujols, Kairy Dharali; Carabante, Kennet Mariano; Jirangrat, Wannita; Scaglia, Guillermo; Janes, Marlene E; Prinyawiwatkul, Witoon

    2015-10-01

    Rib-eye steaks, from 3 forage-finished systems (S1, S2, and S3) and 1 commercial steak (C), either cooked by 1-sided-grilling or 2-sided-grilling, were evaluated for sensory acceptability [overall appearance (ORA) and overall appearance of fat (OAF) for raw steaks; overall appearance (OCA), overall beef aroma (OBA), overall beef flavor (OBF), juiciness, tenderness and overall liking (OL) for cooked steaks] and purchase intent by Hispanic, Asian and U.S. consumers. They also indicated preferred degree of doneness and cooking methods. Cross-cultural differences in preferences and consumer acceptability of rib-eye steaks were observed. Grilling was the most preferred cooking method. Hispanics and Asians preferred medium and/or medium well, while U.S. consumers preferred medium and/or medium rare. For cooked steaks, the population effect was significant for all sensory attributes; Asians generally scored lower than did Hispanics and U.S. consumers. C and S3 generally had higher scores for all sensory attributes across 3 populations. Purchase intent for all forage-finished steaks was higher for Hispanics and U.S. consumers compared to Asians (50.0% to 77.8% compared with 43.2% to 65.9%). Attributes influencing purchase intent of forage-finished steaks differed among populations: tenderness (odds ratio = 1.4) for Hispanics, OCA (odds ratio = 1.5) for Asians, and OBF (odds ratio = 1.3) for U.S. consumers. Overall, this study demonstrated that the type of forage-finished system and ethnic differences influenced sensory acceptability and purchase intent of forage-finished rib-eye steaks. Demand for forage-finished beef has increased worldwide due to its potential health benefits. Little is known regarding the cross-cultural effects on the consumer acceptance of forage-finished beef. We evaluated sensory acceptance and purchase intent of raw and cooked forage-finished rib-eye steaks using Hispanic, Asian, and U.S. (White and African American) populations. This study

  5. An explorative study on pork loin recognition

    DEFF Research Database (Denmark)

    Larsen, Anders Boesen Lindbo; Hviid, Marchen Sonja; Larsen, Rasmus

    2013-01-01

    Bag-of-words (BoW) image description has shown good performance for a large variety of image recognition scenarios. We investigate approaches to alleviating a standard BoW image description pipeline representations for the specific task of recognizing pork loins. Specifically, we extend the Bo...

  6. HYPNOTHERAPY INTERVENTION FOR LOIN PAIN HEMATURIA: A CASE STUDY1

    Science.gov (United States)

    Elkins, Gary R.; Koep, Lauren L.; Kendrick, Cassie E.

    2012-01-01

    Loin pain hematuria is characterized by chronic loin pain, hematuria, and dysuria. There are no known effective treatments for loin pain hematuria and longer-term use of analgesics and surgical options are often ineffective or associated with negative side effects. This article reports on a 17-year-old female patient diagnosed with loin pain hematuria who presented with unilateral, uncontrolled loin pain following numerous unsuccessful attempts at controlling her symptoms with traditional medical interventions—including antibiotics, opioids, and renal denervation. The patient received 8 sessions of hypnotherapy. Baseline, end-point, and follow-up measures administered included the General Health Questionnaire, Hospital Anxiety and Depression Scale, McGill Pain Questionnaire, Pain Discomfort Scale, and visual analogue measures of pain, academic interference, and social interference. At follow-up, results indicated clinically significant decreases in pain, anxiety, and depression with nearly complete remission of presenting symptoms. PMID:22098573

  7. Clinical characteristics of acute renal failure with severe loin pain and patchy renal vasoconstriction

    Directory of Open Access Journals (Sweden)

    Jeonghwan Lee

    2012-09-01

    Conclusion: ARF with severe loin pain and PRV can present with loin or abdominal pain, even without a history of anaerobic exercise. Careful history taking and appropriate imaging studies are critical in the diagnosis and management of this syndrome.

  8. A national audit of retail lamb loin quality in Australia.

    Science.gov (United States)

    Safari, E; Channon, H A; Hopkins, D L; Hall, D G; van de Ven, R

    2002-07-01

    A retail audit of lamb loin tenderness was conducted over a 12-month period to determine the variation in tenderness of Australian lamb. Tenderness was objectively measured using Warner-Bratzler (WB) shear force. Muscle pH and cooking loss were determined on all samples and colour was measured on a sub-sample of loins. A total of 909 midloins from retail butcher shops and supermarkets located in four Australian capital cities (Sydney, Canberra, Melbourne, and Perth) were evaluated at four sampling times (December 1997 and March, June, and October 1998). Overall, 20.3% of all midloins purchased had a WB shear force value above the threshold level of 5 kg. Generic samples from Melbourne butcher shops were similar for WB shear force on average to the generic samples from Canberra and Sydney, whereas those from Melbourne supermarkets had significantly (Plamb had a greater WB shear force (Plamb. No relationship was found between price per kg and shear force (r=0.02) for loins purchased in Sydney (n=220). Price per kg differed between months (Plamb sold in the domestic market. A lamb eating quality assurance system, based on set protocols, is one approach that is currently being investigated in Australia to ensure the supply of consistently high eating quality lamb to consumers.

  9. Physicochemical and microbiological changes in irradiated fresh pork loins

    International Nuclear Information System (INIS)

    Dogbevi, M.K.; Vachon, C.; Lacroix, M.

    1999-01-01

    The effect of γ-irradiation on the physicochemical and microbiological properties of fresh pork was studied. Radiation treatments were carried out under air on fresh pork loins at doses of 2, 4 and 8 kGy and the loins were evaluated for deamidation, solubility, sulphydryl content and surface hydrophobicity. Deamidation was significantly (p⩽0.05) affected by the treatment with 98% deamidation at a dose of 8 kGy. No significant changes (p>0.05) were noted in sulphydryl content under the same conditions. The increase in deamidation resulted in a decrease in hydrophobicity and an increase in protein solubility. γ-irradiation also reduced the number of microorganisms in the meat. Mesophiles were more resistant to the irradiation treatment than psychrotrophs and Pseudomonas. All irradiated pork samples (1 or 3 kGy) had a bacterial count lower that 10(7) CFU/g after 15 days of storage. A minimal dose of 1 kGy was sufficient to increase the shelf life of fresh pork loins although variations in initial pork contamination was found to be the determining factor accounting for the effectiveness of the treatment

  10. Procedural Priorities of the Pork Loin Supply Chain

    Directory of Open Access Journals (Sweden)

    Matheus Dhein Dill

    2014-04-01

    Full Text Available The pork meat production industry is facing new challenges as a consequence of consumers’ expectations regarding the quality and safety of food products. For the present study, experts and consumers in Rio Grande do Sul State, Brazil were interviewed to identify the attributes of pork loin that need to be improved. Consumers have particular concerns about the juiciness, fibrousness, and portion size of the meat, the diversity of cuts and safety and animal welfare. The supply chain was also analyzed in order to verify the procedural priorities that need to be improved in order to meet the demands of consumers. Experts were interviewed using the quality function deployment methodology. The findings of the study indicate that, improvements must be made in the production sector in terms of animal handling and transportation. In the processing sector, improvements are required regarding slaughter control of PSE and DFD, the development of new packaging, and product fractionation. The requirements in the distribution sector relate to information campaigns for consumers to diffuse the nutritional characteristics of pork loin and in the product safety through sanitary inspection.

  11. Percutaneous renal sympathetic nerve ablation for loin pain haematuria syndrome.

    Science.gov (United States)

    Gambaro, Giovanni; Fulignati, Pierluigi; Spinelli, Alessio; Rovella, Valentina; Di Daniele, Nicola

    2013-09-01

    Loin pain haematuria syndrome (LPHS) is a severe renal pain condition of uncertain origin and often resistant to treatment. Nephrectomy and renal autotrasplantation have occasionally been performed in very severe cases. Its pathogenesis is controversial. A 40-year-old hypertensive lady was diagnosed with LPHS after repeated diagnostic imaging procedures had ruled out any renal, abdominal or spinal conditions to justify pain. Notwithstanding treatment with three drugs, she had frequent hypertensive crises during which the loin pain was dramatically exacerbated. Vascular causes of the pain and hypertension were investigated and excluded. Her renal function was normal. The patient was referred to a multidisciplinary pain clinic, but had no significant improvement in her pain symptoms despite the use of non-steroidal anti-inflammatory drugs, adjuvant antidepressants and opioid-like agents. The pain and the discomfort were so severe that her quality of life was very poor, and her social and professional activities were compromised. Nephrectomy and renal autotransplantation have occasionally been performed in these cases. Since visceral pain signals flow through afferent sympathetic fibres, we felt that percutaneous catheter-based radiofrequency ablation of the renal sympathetic nerve fibres (recently introduced for the treatment of drug-resistant hypertension) could be valuable for pain relief. We treated the patient with radiofrequency ablation (Medtronic Symplicity Catheter) applied only to the right renal artery. After a 6-month follow-up, the patient is pain free and normotensive with all drugs withdrawn. She has experienced no hypertensive crises in the meantime. This observation suggests that percutaneous sympathetic denervation could prove to be an effective mini-invasive strategy for the treatment of chronic renal pain, and LPHS in particular.

  12. Analysis of MRI by fractals for prediction of sensory attributes: A case study in loin

    DEFF Research Database (Denmark)

    Caballero, Daniel; Antequera, Teresa; Caro, Andrés

    2018-01-01

    This study investigates the use of fractal algorithms to analyse MRI of meat products, specifically loin, in order to determine sensory parameters of loin. For that, the capability of different fractal algorithms was evaluated (Classical Fractal Algorithm, CFA; Fractal Texture Algorithm, FTA...... was analysed. Results on this study firstly demonstrate the capability of fractal algorithms to analyse MRI from meat product. Different combinations of the analysed techniques can be applied for predicting most sensory attributes of loins adequately (R > 0.5). However, the combination of SE, OPFTA and MLR...... offered the most appropriate results. Thus, it could be proposed as an alternative to the traditional food technology methods....

  13. Pork loin quality is not indicative of fresh belly or fresh and cured ham quality.

    Science.gov (United States)

    Arkfeld, E K; Wilson, K B; Overholt, M F; Harsh, B N; Lowell, J E; Hogan, E K; Klehm, B J; Bohrer, B M; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

    2016-12-01

    The objective was to characterize the relationship between fresh loin quality with fresh belly or fresh and cured ham quality. Pigs raised in 8 barns representing 2 seasons [cold ( = 4,290) and hot ( = 3,394)] and 2 production focuses [lean ( = 3,627) and quality ( = 4,057)] were used. Carcass characteristics and other meat quality data were collected on 7,684 carcasses. All of the carcasses were evaluated for HCW, LM depth, tenth rib fat depth, leg (ham primal) weight, instrumental color on the gluteus medius and gluteus profundus of the ham face, and subjective loin quality. Instrumental loin color and ultimate pH (≥ 22 h postmortem) were collected on the ventral side of loins along with dimensions and firmness scores of fresh bellies from 50% of the carcasses. Ten percent of the boneless loins and fresh hams were evaluated for slice shear force (SSF) or cured ham characteristics. Correlation coefficients between traits were computed using the CORR procedure of SAS and considered significantly different from 0 at ≤ 0.05. Temperature decline, beginning at 31 min postmortem and concluding at 22 h postmortem, for the longissimus dorsi and semimembranosus muscles were evaluated on 10% of the carcasses. Ultimate loin pH was correlated with dimensional belly characteristics ( ≥ |0.07|; ham instrumental color ( ≥ |0.03|; ≤ 0.05), and semimembranosus ultimate pH ( = 0.33; hams. Instrumental L*on the ventral surface of the loin was related to L* on both muscles of the ham face ( ≤ 0.0001). Even though significant relationships between the loin, belly, and ham were detected, the variability in belly and ham quality explained by variability in loin quality was poor (≤ 22.09%). Compositional differences between the loin and belly may have contributed to those poor relationships. Additionally, differences in temperature declines during chilling between the loin and ham likely contributed to the weak nature of relationships. Equilibration of longissimus dorsi

  14. Effects of dietary magnesium and duration of refrigerated storage on the quality of vacuum-packaged, boneless pork loins.

    Science.gov (United States)

    Apple, J K; Davis, J R; Rakes, L K; Maxwell, C V; Stivarius, M R; Pohlman, F W

    2001-01-01

    Quality data were initially collected on 78 pork loins from crossbred pigs fed diets containing 0, 1.25 or 2.5% magnesium mica (MM). Loins were then vacuum-packaged, and randomly assigned to either 4 or 8 weeks of storage at 2°C. Dietary MM had no (P > 0.05) effect on moisture loss/retention or subjective and objective color measurements. Purge volume increased (Pwater-holding capacity of pork loins during storage, the data indicated inclusion of MM in swine diets may retard onset of oxidative rancidity in vacuum-packaged pork loins.

  15. Analysis of volatile organic compounds and sensory characteristics of pork loin samples irradiated to high doses

    International Nuclear Information System (INIS)

    Hou Zhengchi; Sun Dakuan; Qin Zongying; Jin Jiang; Zhu Liandi; Yao Side; Sheng Kanglong

    2005-01-01

    Fresh pork loin samples, protein enzyme inactivated at (72 ± 3) degree C and vacuum packaged, were irradiated to up to 45 kGy at -20 degree C by 60 Co γ-rays. The irradiated samples were examined by various kinds of method to study high dose irradiation effects of sensory changes (meat color and off-odor), transverse shearing strength, weight loss in steam cooking, volatile organic compounds, and lipid oxidation. The results showed that the high dose irradiation produced no serious effects to the pork loin samples, and volunteer responses showed fine acceptability to the irradiated meat. (authors)

  16. Effect of low dose irradiation of pork loins on the microflora, sensory characteristics and fat stability

    International Nuclear Information System (INIS)

    Mattison, M.L.; Kraft, A.A.; Olson, D.G.; Walker, H.W.; Rust, R.E.; James, D.B.

    1986-01-01

    The effects of low dose (100 krad) irradiation on microflora, sensory characteristics, and development of oxidative rancidity of vacuum packaged pork loins was investigated after irradiation and during low temperature (4 0 C) storage up to 21 days. Irradiation reduced numbers of mesophiles, psychrotrophs, anaerobic bacteria (P<0.01), and staphylococci (P<0.05), with the effect on mesophiles and psychrotrophic spoilage organisms the greatest. Effect of irradiation on sensory characteristics of pork loin was minimal with no detectable differences between irradiated and nonirradiated pork after 14 days of storage. Irradiation of pork did not affect cooking loss or thiobarbituric acid values

  17. Effect of the Programmed Nutrition Beef Program on moisture retention of cooked ground beef patties and enhanced strip loins.

    Science.gov (United States)

    2015-02-01

    This study evaluated the influence of the Programmed Nutrition Beef Program and exogenous growth promotants (ExGP) on water holding capacity characteristics of enhanced beef strip loins. Sixty, frozen strip loins, arranged in a 2 × 2 factorial treatment arrangement with dietary program serving as the first factor and use of ExGP as the second factor, were thawed, injected with an enhancement solution, and stored for 7 days. Loins from ExGP cattle possessed the ability to bind more (P water before pumping and bind less (P water after pumping and storage. Loin pH across treatments was similar (P > 0.10) before injection, but increased post-injection and after storage (P 0.10). The Programmed Nutrition Beef Program and use of ExGPs minimally impacted water holding capacity of enhanced frozen/thawed beef strip loins.

  18. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Science.gov (United States)

    Górska, Ewa; Nowicka, Katarzyna; Jaworska, Danuta; Przybylski, Wiesław; Tambor, Krzysztof

    2017-01-01

    Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME) and gas chromatography–mass spectrometry (GC–MS). For sensory assessment, the quantitative descriptive analysis (QDA) method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively). The dominant compounds were: aromatic hydrocarbon (toluene); alkanes (hexane, heptane, and 2,2,4-trimethylpentane); aldehyde (hexanal); alcohol (2-furanmethanol); ketone (3-hydroxy-2-butanone); phenol (guaiacol); and terpenes (eucalyptol, cymene, γ-terpinen, and limonene). Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production. PMID:27456422

  19. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Directory of Open Access Journals (Sweden)

    Ewa Górska

    2017-05-01

    Full Text Available Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME and gas chromatography–mass spectrometry (GC–MS. For sensory assessment, the quantitative descriptive analysis (QDA method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively. The dominant compounds were: aromatic hydrocarbon (toluene; alkanes (hexane, heptane, and 2,2,4-trimethylpentane; aldehyde (hexanal; alcohol (2-furanmethanol; ketone (3-hydroxy-2-butanone; phenol (guaiacol; and terpenes (eucalyptol, cymene, γ-terpinen, and limonene. Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production.

  20. Expression of porcine myosin heavy chain 1 gene in Berkshire loins ...

    African Journals Online (AJOL)

    Expression of porcine myosin heavy chain 1 gene in Berkshire loins with a high pH24 value. Jin Hun Kang, Woo Young Bang, Eun Jung Kwon, Yong Hwa Lee, Da Hye Park, Eun Seok Cho, Min Ji Kim, Jong-Soon Choi, Hwa Chun Park, Beom Young Park, Chul Wook Kim ...

  1. The Impact of Ripening Time on Technological Quality Traits, Chemical Change and Sensory Characteristics of Dry-cured Loin

    Directory of Open Access Journals (Sweden)

    Pil Nam Seong

    2015-05-01

    Full Text Available The effect of ripening time on the technological quality traits, fatty acid compositions and sensory characteristics of dry-cured loin was studied. Pork loins (n = 102 at 24 h post-mortem were used to produce dry-cured loins. The dry-cured loins were assessed at 30, 60, and 90 days of ripening for the aforementioned characteristics. Our results showed that the water activity (aw decreased (p<0.05 up to 60 days and did not change thereafter. The lipid oxidation and weight loss levels significantly (p<0.05 increased with increased ripening time. The Commission Internationale de l’Eclairage (CIE L* decreased for 90 days while CIE a* increased for 60 days and did not increase thereafter. More noticeably, the levels of most of unsaturated fatty acids and total polyunsaturated fatty acids significantly decreased as increasing ripening time up to 90 days. The 30 days-ripened loins had lower (p<0.05 color, flavor and overall acceptability scores than the loins ripened for 60 and 90 days, however, no differences in sensory traits occurred between the 60 and 90 day-ripened samples. Based on the results obtained in the present study, it is suggested that the ripening duration between 30 and 60 days could be more appropriate for producing dry-cured loin product with higher quality and economic benefits.

  2. Ekspedeerimisfirmade TOP

    Index Scriptorium Estoniae

    2008-01-01

    Ekspedeerimisfirmade TOP 57. Vt. samas: Tanel Raig. Majandus kukutab ekspedeerimisturgu. Diagramm: Väliskaubanduse statistika; Katrin Raie. Ekspedeerijad hakkavad rohkem koostööle rõhuma. Kommenteerib Jaan Lepp; Müügitulu TOP 10; Müügitulu kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Eestis registreeritud Vene hiiglane; Ekspedeerimisturu kasumiliider kaotas 20 miljonit; Küsimustele vastab OÜ Contimer juht Dmitri Redkin

  3. Effect of hot carcass weight on loin, ham, and belly quality from pigs sourced from a commercial processing facility,.

    Science.gov (United States)

    Harsh, B N; Arkfeld, E K; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

    2017-11-01

    The objective was to determine the predictive abilities of HCW for loin, ham, and belly quality of 7,684 pigs with carcass weights ranging from 53.2 to 129.6 kg. Carcass composition, subjective loin quality, and ham face color were targeted on all carcasses, whereas in-plant instrumental loin color and belly quality were assessed on 52.0 and 47.5% of carcasses, respectively. Loin chop slice shear force (SSF), cured ham quality, and adipose iodine value (IV) were evaluated on at least 10% of the population. The slope of regression lines and coefficients of determination between HCW and quality traits were computed using PROC REG of SAS and considered significant at ≤ 0.05. As HCW increased, boneless loins became darker and redder, evidenced by lower L* (β = -0.0243, color score (β = 0.0024, ham face color ( ham face L* values and 0.47% of the variability in a* values. Heavier carcasses produced thicker and firmer bellies, with HCW accounting for 37.81% of the variability in belly thickness (β = 0.0272, ham quality explained by HCW was poor (≤5.60%), suggesting that HCW is a poor predictor of the primal quality of pigs within this weight range. Nonetheless, HCW was a moderate predictor of belly quality traits. The findings of this study suggest that increasing HCW did not compromise loin, ham, or belly quality attributes.

  4. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin

    OpenAIRE

    Kim, Yiseul; Hong, Geun-Pyo

    2016-01-01

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4? for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4?. Despite that SSF was conducted with the ...

  5. Microbiological quality and safety of Skipjack tuna loins (Katsuwonus Pelamis intented for canning

    Directory of Open Access Journals (Sweden)

    Francesco Casalinuovo

    2018-03-01

    Full Text Available Tuna is a food widely consumed fresh and canned as well. After catching and filleting, a pre-cooking step is normally followed by freezing and shipping to canning industry as loins. The aim of this paper was to assess the microbiological quality and safety of tuna loins (50 samples imported by an Italian canned tuna producer from two different FAO fishing areas. Total bacterial count (TBC, Coliforms, Enterobacteriaceae, Escherichia coli, Listeria monocytogenes, Salmonella, Staphylococcus aureus, Vibrio parahaemolyticus, Vibrio cholera, pH measurement, S. aureus enterotoxin and histamine levels were evaluated. Significant differences were evidenced for TBC, Enterobacteriaceae, E. coli, Coliforms and pH between fishing areas. Staphylococcus aureus was detected in all the samples tested at 1 to 3 Log cfu/g; Staphylococcus warneri, S. saprophyticus, S. epidermidis, S. hominis, S. intermedius, S. vitulinus and S. sciuri were also identified. Listeria monocytogenes, Salmonella, Vibrio parahaemolyticus, Vibrio cholera and Staphylococcus aureus enterotoxin were not detected. Histamine ranged between 0 to 5 mg/kg. The tuna loins analysed in this paper have to be considered safe; staphylococci presence represents a possible concern and has to been taken in account when risk analysis is carried out.

  6. Prediction of pork loin quality using online computer vision system and artificial intelligence model.

    Science.gov (United States)

    Sun, Xin; Young, Jennifer; Liu, Jeng-Hung; Newman, David

    2018-06-01

    The objective of this project was to develop a computer vision system (CVS) for objective measurement of pork loin under industry speed requirement. Color images of pork loin samples were acquired using a CVS. Subjective color and marbling scores were determined according to the National Pork Board standards by a trained evaluator. Instrument color measurement and crude fat percentage were used as control measurements. Image features (18 color features; 1 marbling feature; 88 texture features) were extracted from whole pork loin color images. Artificial intelligence prediction model (support vector machine) was established for pork color and marbling quality grades. The results showed that CVS with support vector machine modeling reached the highest prediction accuracy of 92.5% for measured pork color score and 75.0% for measured pork marbling score. This research shows that the proposed artificial intelligence prediction model with CVS can provide an effective tool for predicting color and marbling in the pork industry at online speeds. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Effect of Mixing Ratio between Pork Loin and Chicken Breast on Textural and Sensory Properties of Emulsion Sausages

    Science.gov (United States)

    2014-01-01

    This study is conducted to evaluate the effects of the mixing ratio between pork loin and chicken breast for textural and sensory properties of emulsion sausages. Meat homogenates are prepared by using five mixing ratios between pork loin and chicken breast (100:0, 70:30, 50:50, 30:70, and 0:100), and the emulsion sausages are also formulated with five mixing ratios. The additions of chicken breast increase the salt soluble protein solubility due to high pH levels of chicken breast, thereby resulting in the reduction of cooking losses. In addition, the apparent viscosity of meat homogenates increase with increasing amounts of chicken breast. In terms of emulsion sausages formulated with pork loin and chicken breast, the addition of chicken breast above 50% may contribute to a softer and more flexible texture of emulsion sausages. For sensory evaluations, an increase in the added amount of chicken breast contributes to a rich umami taste and deeper flavor within the emulsion sausages, resulting in the high overall acceptance score for the formulation of 0-30% pork loin and 70-100% chicken breast. Therefore, the optimal mixing ratios between pork loin and chicken breast are 0-30% and 70-100% for enhancing the textural and sensory properties of emulsion sausages. PMID:26760930

  8. Changes in microflora and other characteristics of vacuum-packaged pork loins irradiated at 3.0 kGy

    International Nuclear Information System (INIS)

    Lebepe, S.; Molins, R.A.; Charoen, S.P.; Farrar, H. IV; Skowronski, R.P.

    1990-01-01

    Effects of 3.0-kGy irradiation on microflora and other attributes of fresh, vacuum-packaged pork loins were examined during storage (2-4 degrees C, 98 days) and mishandling (24-25 degrees C, 24 and 48 hr). Shelf life of pork chops from irradiated loins was determined at 5 degrees C. Irradiated loins kept at 2-4 degrees C tested negative for Salmonella spp., Campylobacter spp., Clostridium perfringens and Staphylococcus aureus. Yersinia spp., was detected in pork chops held at 5 degrees C; this organism, C. perfringens and Aeromonas spp. were present in abused samples. In two irradiated samples Listeria monocytogenes was found. Irradiation reduced aerobic, anaerobic and Aeromonas spp. counts; lactobacilli were least affected. Chemical spoilage began after 91 days at 2-4 degrees C. With irradiation, TBA values were unaffected but Hunter a color values increased

  9. The effect of sex, carcass mass, back fat thickness and lean meat content on pork ham and loin characteristics

    Directory of Open Access Journals (Sweden)

    D. Knecht

    2016-01-01

    P  ≤ 0.01. Half-carcass mass showed a strong negative correlation with bone content in ham and loin (r = −0.35 and r = −0.21, respectively. Back fat thickness and meat content strongly and inversely correlated with the content of ham and loin in half-carcasses (r = −0.41 and r = 0.59 for back fat thickness; r = 0.66 and r = −0.57 for lean meat content. Close and inverse correlations of back fat thickness and lean meat content were observed with regard to their content in ham and loin (P  ≤ 0.01.

  10. Kinnisvarafirmade TOP 90

    Index Scriptorium Estoniae

    2002-01-01

    TOP 90. Kinnisvara valdkondade TOP 5. Käibe TOP 30. Käibe kasvu TOP 30. Rentaabluse TOP 30. Kasumi TOP 30. Kasumi kasvu TOP 30. Varade tootlikkuse TOP 30. Kinnisvarafirmade üldandmed. Kinnisvarafirmade finantsandmed

  11. Volatile compound profile of sous-vide cooked lamb loins at different temperature-time combinations.

    Science.gov (United States)

    Roldán, Mar; Ruiz, Jorge; Del Pulgar, José Sánchez; Pérez-Palacios, Trinidad; Antequera, Teresa

    2015-02-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60 and 80°C) and time (6 and 24h) to assess the effect on the volatile compound profile. Major chemical families in cooked samples were aliphatic hydrocarbons and aldehydes. The volatile compound profile in sous-vide cooked lamb loin was affected by the cooking temperature and time. Volatile compounds arising from lipid oxidation presented a high abundance in samples cooked at low or moderate cooking conditions (60°C for 6 and 24h, 80°C for 6h), while a more intense time and temperature combination (80°C for 24h) resulted on a higher concentration of volatile compounds arising from Strecker degradations of amino acids, as 2-methylpropanal and 3-methylbutanal. Therefore, sous-vide cooking at moderately high temperatures for long times would result in the formation of a stronger meaty flavor and roast notes in lamb meat. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Science.gov (United States)

    García-Márquez, I.; Ordóñez, J. A.; Cambero, M. I.; Cabeza, M. C.

    2012-01-01

    The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse) has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C), the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing. PMID:23227053

  13. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Directory of Open Access Journals (Sweden)

    I. García-Márquez

    2012-01-01

    Full Text Available The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C, the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing.

  14. Kinnisvarafirmade TOP 90

    Index Scriptorium Estoniae

    2003-01-01

    Kinnisvarafirmade TOP 90. Rentaabluse TOP 30. Käibe TOP 30. Käibe kasvu TOP 30. Kasumi TOP 30. Kasumi kasvu TOP 30. Varade tootlikkuse TOP 30. Kinnisvarafirmade üldandmed. Kinnisvarafirmade finantsandmed

  15. Teedeehitusfirmade TOP 24

    Index Scriptorium Estoniae

    2006-01-01

    Teedeehitusfirmade TOP. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi Kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Teedeehitusfirmade üld- ja finantsandmed

  16. Koolitusfirmade TOP 50

    Index Scriptorium Estoniae

    2006-01-01

    Koolitusfirmade TOP. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Majandustegevuse kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Koolitusfirmade üld- ja finantsandmed

  17. Telekommunikatsiooni TOP aastal 2003

    Index Scriptorium Estoniae

    2004-01-01

    Telekommunikatsiooni TOP aastal 2003. Käibe TOP 10. Käibe kasvu TOP 10. Rentaabluse TOP 10. Kasumi TOP 10. Kasumi kasvu TOP 10. Omakapitali tootlikkuse TOP 10. Telekommunikatsioonifirmade üldandmed. Telekommunikatsioonifirmade finantsandmed

  18. Põllumajandustootjate TOP 50

    Index Scriptorium Estoniae

    2006-01-01

    Põllumajandustootjate TOP. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Majandustegevuse kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Põllumajandustootjate üld- ja finantsandmed

  19. Ehitusmaterjalitootjate TOP 95

    Index Scriptorium Estoniae

    2006-01-01

    Ehitusmaterjalitootjate TOP. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Ehitusmaterjalitootjate üld- ja finantsandmed

  20. Effect of the type of frying culinary fat on volatile compounds isolated in fried pork loin chops by using SPME-GC-MS.

    Science.gov (United States)

    Ramírez, María Rosario; Estévez, Mario; Morcuende, David; Cava, Ramón

    2004-12-15

    The effect of the type of frying culinary fat (olive oil, sunflower oil, butter, and pig lard) on volatile compounds isolated from fried pork loin chops (m. Longissimus dorsi) was measured by SPME-GC-MS. Frying modified the fatty acid composition of lipids from pork loin chops, which tended to be similar to that of the culinary fat used to fry. Volatile compounds formed from the oxidation of fatty acids increased, such as aldehydes, ketones, alcohols, and hydrocarbons. Besides, each culinary fat used modified the volatile profiles in fried meat differently. Sunflower oil-fried pork loin chops presented the highest aldehyde aliphatic content, probably due to their highest content of polyunsaturated acids. Hexanal, the most abundant aldehyde in fried samples, presented the most elevated content in sunflower oil-fried pork loin chops. In addition, these samples presented more heterocyclic compounds from the Maillard reaction than other fried samples. Volatiles detected in olive oil-fried pork loin chops were mainly lipid-derived compounds such as pentan-1-ol, hexanal, hept-2-enal, nonanal, decanal, benzaldehyde, and nonan-2-one. Butter-fried pork loins were abundant in ketones with a high number of carbons (heptan-2-one, nonan-2-one, undecan-2-one, tridecanone, and heptadecan-2-one). Pig lard-fried pork loin chops presented some Strecker aldehydes isolated in only these samples, such as 2-methylbutanal and 3-(methylthio)propanal, and a sulfur compound (dimethyl disulfide) related to Strecker aldehydes.

  1. Prediction of intramuscular fat levels in Texel lamb loins using X-ray computed tomography scanning.

    Science.gov (United States)

    Clelland, N; Bunger, L; McLean, K A; Conington, J; Maltin, C; Knott, S; Lambe, N R

    2014-10-01

    For the consumer, tenderness, juiciness and flavour are often described as the most important factors for meat eating quality, all of which have a close association with intramuscular fat (IMF). X-ray computed tomography (CT) can measure fat, muscle and bone volumes and weights, in vivo in sheep and CT predictions of carcass composition have been used in UK sheep breeding programmes over the last few decades. This study aimed to determine the most accurate combination of CT variables to predict IMF percentage of M. longissimus lumborum in Texel lambs. As expected, predicted carcass fat alone accounted for a moderate amount of the variation (R(2)=0.51) in IMF. Prediction accuracies were significantly improved (Adj R(2)>0.65) using information on fat and muscle densities measured from three CT reference scans, showing that CT can provide an accurate prediction of IMF in the loin of purebred Texel sheep. Copyright © 2014. Published by Elsevier Ltd.

  2. The effect of branding on consumer palatability ratings of beef strip loin steaks.

    Science.gov (United States)

    Wilfong, A K; McKillip, K V; Gonzalez, J M; Houser, T A; Unruh, J A; Boyle, E A E; O'Quinn, T G

    2016-11-01

    The objective of this study was to determine the influence of knowing the brand or USDA grade on consumer palatability ratings of beef strip loin steaks. Strip loins were selected to represent 5 USDA grades and brands, USDA Select, Choice, Prime, Certified Angus Beef (CAB; upper 2/3 Choice), and Select, from carcasses of cattle classified as Angus on the basis of phenotype. After 21 d of aging, 2.5-cm-thick steaks were cut, consecutively cut steaks were paired for consumer evaluation. Consumer panelists ( = 112) evaluated samples for tenderness, juiciness, flavor liking, and overall liking. Additionally, consumers rated each palatability trait as either acceptable or unacceptable. Samples were fed in 2 rounds on the same day: blind and informed testing. In the first round, blind testing, consumers were served 1 sample from each treatment, with no product information provided. In the second round, consumers were informed of the brand or quality grade prior to sampling. During blind testing, CAB rated similar ( > 0.05) to Choice for all palatability traits; however, CAB rated greater ( 0.05) for all traits when tested blind, but Angus Select was rated greater ( brand was declared. When comparing blind and informed ratings, Angus Select and CAB had greater ( brand disclosure. However, ratings for Choice and Select samples were unaffected ( > 0.05) when brand was disclosed. Brand knowledge increased ( 0.05) in the percentage of Choice and Select samples rated as acceptable for all palatability traits. These data indicate that Prime, CAB, and Angus Select steaks receive an increase in consumer palatability perception, or "brand lift," which does not occur for Choice and Select beef.

  3. Top Earners

    DEFF Research Database (Denmark)

    Badel, Alejandro; Daly, Moira; Huggett, Mark

    of the earnings distribution becomes thicker with age, and (3) the growth rate of earnings over the working lifetime is larger for groups with higher lifetime earnings. Models of top earners should account for these qualitative patterns and, importantly, for how they quantitatively differ across countries....

  4. Effect of different temperature-time combinations on lipid and protein oxidation of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldan, Mar; Antequera, Teresa; Armenteros, Monica; Ruiz, Jorge

    2014-04-15

    Forty-five lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70 and 80 °C) and time (6, 12 and 24 h) to assess the effect on the oxidative stability of lipids and proteins. Heating induced both lipid and protein oxidation in lamb loins. Higher cooking temperature-time combinations increased conjugated dienes and decreased thiobarbituric reactive substances (TBARS) values and hexanal. Total protein carbonyls increased throughout time at all cooking temperatures considered, while α-aminoadipic (AAS) and γ-glutamic semialdehydes (GGS) increased when cooking at 60 °C but not at 80 °C. Links between the decrease in secondary compounds from lipid oxidation due to cooking at higher temperatures and for longer times with the increased levels of 3-methylbutanal and greater differences between total protein carbonyls and AAS plus GGS were hypothesised. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Sensory and consumer evaluation of pork loins from crossbreeds between Danish Landrace, Yorkshire, Duroc, Iberian and Mangalitza

    DEFF Research Database (Denmark)

    Straadt, Ida Krestine; Aaslyng, Margit Dall; Bertram, Hanne Christine S.

    2013-01-01

    Iberian (I) and Mangalitza (M) boars were crossed with Duroc (D) and Landrace/Yorkshire (LY) sows and compared with the traditional crossbreed DLY. The sensory attributes were analysed, and consumers evaluated the fried loins. Gas chromatography (GC) aroma analysis was performed on the fried meat......, and fatty acid composition was determined on the loin and the subcutaneous fat, respectively. No marked differences were found in odour, appearance or flavour/taste between the alternative crossbreeds and DLY; however, the alternative crossbreeds had improved textural properties. Consumer evaluation...... revealed that the alternative crossbreeds obtained positive associations compared with DLY, and MD was ranked best or second best by almost 60% of the consumers. No pronounced differences were found in the aroma compounds between the different crossbreeds. Correlations were found between the fatty acid...

  6. Updated estimates of HAL n and RN- effects on pork quality: fresh and processed loin and ham.

    Science.gov (United States)

    Cherel, P; Glénisson, J; Figwer, P; Pires, J; Damon, M; Franck, M; Le Roy, P

    2010-12-01

    A 1000-pig F2 intercross QTL detection experimental population was generated using two commercial sire lines. Independent carriers of HAL n and RN- mutations (10% and 14%, respectively) were included in this population as control genotypes. The effects of HAL n and RN- heterozygous genotypes on fresh and transformed loins and hams were estimated using a mixed model methodology. The results document the unfavorable effects of both mutations on meat quality. Smaller effects of HAL Nn genotype compared to HAL nn or RN-rn+ genotypes were estimated. Interestingly, effects of HAL Nn genotype on meat pH and loin color could be insignificant at 24-h postmortem, but translate into higher water losses on storage and cooking, and result in tougher cooked loin. Using the same methodology, significant effects of the PRKAG3 (RN) I199 allele on ultimate pH values but not on glycolytic potential were observed. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  7. Autotranspordifirmade TOP 100

    Index Scriptorium Estoniae

    2006-01-01

    Ilmunud ka: Delovõje Vedomosti : Transport i Logistika 29. nov. lk. 10-11. Autofirmade TOP 100. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Majandustegevuse kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Autotranspordifirmade üld- ja finantsandmed. Delovõje Vedomosti : Transport i Logistika sisaldab tabelit Autofirmade TOP 100

  8. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin

    Science.gov (United States)

    2016-01-01

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat. PMID:27857541

  9. Stability of lamb loin stored under refrigeration and packed in different modified atmosphere packaging systems.

    Science.gov (United States)

    Fernandes, Rafaella de Paula Paseto; Freire, Maria Teresa de Alvarenga; de Paula, Elisa Silva Maluf; Kanashiro, Ana Livea Sayuri; Catunda, Fernanda Antunes Pinto; Rosa, Alessandra Fernandes; Balieiro, Júlio Cesar de Carvalho; Trindade, Marco Antonio

    2014-01-01

    The aim of the present study was to evaluate the effect of different modified atmosphere packaging (MAP) systems (vacuum, 75% O2+25% CO2 and 100% CO2) on the stability of lamb loins stored at 1±1°C for 28 days. Microbiological (counts of aerobic and anaerobic psychrotrophic microorganisms, coliform at 45°C, coagulase-positive staphylococci and lactic acid bacteria and presence of Salmonella), physical and chemical (thiobarbituric acid reactive substances [TBARS], objective color, pH, water loss from cooking [WLC] and shear force), sensory (acceptance testing using a 9-point hedonic scale) and gas composition analyses were performed. Lamb meat remained stable with respect to the majority of the evaluated physical and chemical indexes and within the standards established by Brazilian legislation for pathogenic microorganisms throughout the storage period in all three packaging systems. However, with respect to psychrotrophic microorganisms, 100% CO2 packaging system provided increased stability despite presenting lower appearance preference. © 2013.

  10. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin.

    Science.gov (United States)

    Kim, Yiseul; Hong, Geun-Pyo

    2016-10-31

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

  11. Autotranspordi TOP aastal 2007

    Index Scriptorium Estoniae

    2008-01-01

    TOP 50. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Marika Roomere. Täisteenuse pakkumine kergitas tulemusi; Jupiter Plus otsib järjest uusi kasvuvõimalusi; EST-Trans Kaubaveod teenib kasumit toiduvedamisega

  12. Koolitusfirmade TOP aastal 2007

    Index Scriptorium Estoniae

    2008-01-01

    Koolitusfirmade TOP. Vt. samas: Käibe TOP 10; Käibekasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Signe Sillasoo. Invicta tahab lähiaastail laieneda Eestis ja mujalgi; Ketlin Priilinn. Addenda kasutas ära majanduse soodsa seisu. Kommenteerib Heli Sõmer. Juhtide hoiakute muutmisega tõus esikolmikusse

  13. Audiitorfirmade TOP aastal 2007

    Index Scriptorium Estoniae

    2008-01-01

    Audiitorfirmade TOP 51. Vt. samas: Urve Vilk. Audiitoriteni pole majanduslangus jõudnud; Intervjuu I.S. Audiitorteenuste OÜ omaniku Irina Somovaga; Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10

  14. Koolitusfirmade TOP aastal 2006

    Index Scriptorium Estoniae

    2007-01-01

    Koolitusfirmade TOP. Vt. samas: Käibe TOP10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Varade tootlikkuse TOP 10; Pille Rõivas. Võtmetegur meeskond; Vain & Partnerid: uudsus peitub sisus; Kristo Kiviorg. Teel Baltimaade koolitajate tippu

  15. Top reconstruction and boosted top experimental overview

    CERN Document Server

    Skinnari, Louise

    2015-01-01

    An overview of techniques used to reconstruct resolved and boosted top quarks is presented. Techniques for resolved top quark reconstruction include kinematic likelihood fitters and pseudo- top reconstruction. Many tools and methods are available for the reconstruction of boosted top quarks, such as jet grooming techniques, jet substructure variables, and dedicated top taggers. Different techniques as used by ATLAS and CMS analyses are described and the performance of different variables and top taggers are shown.

  16. Non-destructive analysis of sensory traits of dry-cured loins by MRI-computer vision techniques and data mining.

    Science.gov (United States)

    Caballero, Daniel; Antequera, Teresa; Caro, Andrés; Ávila, María Del Mar; G Rodríguez, Pablo; Perez-Palacios, Trinidad

    2017-07-01

    Magnetic resonance imaging (MRI) combined with computer vision techniques have been proposed as an alternative or complementary technique to determine the quality parameters of food in a non-destructive way. The aim of this work was to analyze the sensory attributes of dry-cured loins using this technique. For that, different MRI acquisition sequences (spin echo, gradient echo and turbo 3D), algorithms for MRI analysis (GLCM, NGLDM, GLRLM and GLCM-NGLDM-GLRLM) and predictive data mining techniques (multiple linear regression and isotonic regression) were tested. The correlation coefficient (R) and mean absolute error (MAE) were used to validate the prediction results. The combination of spin echo, GLCM and isotonic regression produced the most accurate results. In addition, the MRI data from dry-cured loins seems to be more suitable than the data from fresh loins. The application of predictive data mining techniques on computational texture features from the MRI data of loins enables the determination of the sensory traits of dry-cured loins in a non-destructive way. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  17. La subjugation des femmes musulmanes et la sororité dans Loin de Médine par Assia Djebar

    Directory of Open Access Journals (Sweden)

    Rachel van Deventer

    2010-05-01

    Full Text Available Cet article porte sur les premières femmes musulmanes telles qu’elles sont représentées dans l’oeuvre d’Assia Djebar, Loin de Médine, récit situé au tout début de l’histoire de l’Islam. A travers les parcours narratifs de plusieurs femmes marquantes de l’histoire de l’Islam, l’auteur identifie la sororité comme arme unique contre toute oppression. Une lecture critique invite non seulement les lectrices mais aussi les lecteurs contemporains à examiner le statut actuel des femmes musulmanes.

  18. Comparison of different image analysis algorithms on MRI to predict physico-chemical and sensory attributes of loin

    DEFF Research Database (Denmark)

    Caballero, Daniel; Caro, Andrés; Dahl, Anders Bjorholm

    2018-01-01

    -chemical and sensory analysis. CFA reached low relationship for the quality parameters of loins, the remaining algorithms achieved correlation coefficients higher than 0.5 noting OPFTA that reached the highest correlation coefficients in all cases except for the L* coordinate color that GLCM obtained the highest...... correlation coefficient. These high correlation coefficients confirm the new algorithm as an alternative to the other computer vision approaches in order to compute the physico chemical and sensory parameters of meat products in a non-destructive and efficient way....

  19. Genetic variation of loin and ham quality in Finnish Landrace and Large White pigs

    Directory of Open Access Journals (Sweden)

    M-L. SEVÓN-AIMONEN

    2008-12-01

    Full Text Available Selection potential for meat quality of economically important loin (longissimus and ham muscles (adductor, semimembranosus, biceps femoris has been assessed. Ultimate pH (pHu, meat colour (lightness, redness and yellowness, drip loss and two visually scored colour traits were recorded from 483 Finnish Landrace and 494 Finnish Large White station test pigs in a half-sib design. A univariate restricted maximum likelihood procedure was used to estimate variance components. The statistical model contained age at beginning of test, sex and time lapse from slaughter to dissection as fixed effects and slaughter batch, common environment of littermates and additive genetic effect of the animal as random effects. The average pHu values in adductor and semispinalis were between 5.6 and 6.1. The pHu were on average 5.4 and 5.5 in longissimus and semimembranosus respectively, with the latter two being lower than optimum values of 5.6 to 5.9. Lightness for semimembranosus turned to be clearly lighter (62 than for other muscles. Lightness for longissimus (56 was slightly lighter than optimum (from 48 to 54. The heritability varied from zero to 0.45 for pHu, from 0.02 to 0.34 for lightness, from 0.17 to 0.56 for redness, from zero to 0.28 for yellowness and from 0.05 to 0.16 for drip loss. Heritability for redness values was considerably higher than heritability for other meat quality traits. The heritability of quality traits spoke for possibilities for genetic improvement of meat quality. Genetic correlations between quality traits (pHu and lightness and average daily gain varied strongly among breeds and muscles. Genetic correlations between meat-% and pHu were in most cases high and unfavourable (rg from –0.36 to –0.68 except in longissimus, where it was 0.11. Genetic correlations between meat-% and lightness were unfavourable in Finnish Large White (from 0.47 to 0.92 but in Finnish Landrace estimates varied among muscles (from –0.40 to 0.47. Due to

  20. The effect of a high monounsaturated fat diet on body weight, back fat and loin muscle growth in high and medium-lean pig genotypes

    Energy Technology Data Exchange (ETDEWEB)

    Mas, G.; Soler, J.; Llavall, M.; Tibau, J.; Roca, R.; Coll, D.; Fabrega, E.

    2012-11-01

    The objective of this study was to evaluate whether the use of a diet rich in oleic acid could have an effect on daily weight gain, backfat and loin muscle (Longissimus thoracis) depth. One hundred and ninety-two barrows and gilts, from two genotypes were fed a grain and soy diet (CONTROL with 28% C18:1) or a similar diet enriched with oleic acid (HO with 43% C18:1, Greedy-Grass OLIVA). The pigs were housed in 16 pens in groups of 12 according to their sex, diet and genotype. From 75 days of age every three weeks, the pigs were weighed and the backfat and loin muscle depth were ultrasonically recorded (PIGLOG). The inclusion of the dietary fat had no significant effect on the growth variables nor on the backfat and loin muscle depth measurements taken. However, the barrows resulted in higher live weight and backfat compared to the gilts at the end of the trial. Conversely, the gilts showed higher loin depth. Moreover, York-sired pigs were heavier than Pietrain-sired pigs during the whole trial and showed higher backfat at the last two measurements. Pietrain-sired pigs had higher loin muscle depth at the last measurements. The results of the present study suggest that the addition of a dietary fat into diets aiming at modifying the meat fatty acid profile has no detrimental effects on performance variables, or on backfat and loin muscle growth and thus, no negative economic impact for producers. (Author) 37 refs.

  1. Estimation of Sensory Pork Loin Tenderness Using Warner-Bratzler Shear Force and Texture Profile Analysis Measurements.

    Science.gov (United States)

    Choe, Jee-Hwan; Choi, Mi-Hee; Rhee, Min-Suk; Kim, Byoung-Chul

    2016-07-01

    This study investigated the degree to which instrumental measurements explain the variation in pork loin tenderness as assessed by the sensory evaluation of trained panelists. Warner-Bratzler shear force (WBS) had a significant relationship with the sensory tenderness variables, such as softness, initial tenderness, chewiness, and rate of breakdown. In a regression analysis, WBS could account variations in these sensory variables, though only to a limited proportion of variation. On the other hand, three parameters from texture profile analysis (TPA)-hardness, gumminess, and chewiness-were significantly correlated with all sensory evaluation variables. In particular, from the result of stepwise regression analysis, TPA hardness alone explained over 15% of variation in all sensory evaluation variables, with the exception of perceptible residue. Based on these results, TPA analysis was found to be better than WBS measurement, with the TPA parameter hardness likely to prove particularly useful, in terms of predicting pork loin tenderness as rated by trained panelists. However, sensory evaluation should be conducted to investigate practical pork tenderness perceived by consumer, because both instrumental measurements could explain only a small portion (less than 20%) of the variability in sensory evaluation.

  2. Arvutifirmade TOP 101 aastal 2004

    Index Scriptorium Estoniae

    2005-01-01

    Arvutifirmade TOP 101; Käibe TOP 20; Käibe kasvu TOP 15; Kasumi TOP 15; Rentaabluse TOP 20; Kasumi kasvu TOP 15; Omakapiali tootlikkuse TOP 15; Eesti arvutifirmade finantsandmed; Arvutifirmade üldandmed

  3. Jaekaubanduse TOP 100 aastal 2001

    Index Scriptorium Estoniae

    2002-01-01

    TOP 100. Käibe TOP 30. Käibe kasvu TOP 30. Kasumi TOP 30. Kasumi kasvu TOP 30. Rentaabluse TOP 30. Varade tootlikkuse TOP 30. Jaekaubandusettevõtete finantsseadmed. Jaekaubandusettevõtete üldandmed

  4. Jaekaubandusettevõtete TOP 70

    Index Scriptorium Estoniae

    2005-01-01

    Jaekaubandusettevõtete TOP 70; Käibe TOP 25; Kasumi TOP 25; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Jaekaubandusettevõtete üld- ja finantsandmed

  5. Majutusasutuste TOP 40 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Majutusasutuste TOP 40 aastal 2002. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Majutusasutuste üldandmed. Majutusasutuste finantsandmed

  6. Does this case hold the answer to one of the worse types of pain in medicine--that of loin pain haematuria syndrome (LPHS).

    Science.gov (United States)

    Russell, Alan; Chatterjee, Suman; Seed, Michael

    2015-04-26

    A patient with loin pain haematuria syndrome suffering chronic throbbing pulsing pain overlaid with prolonged periods of incapacitating colic and overnight vomiting was presented 10 months following diagnosis. Ultrasound was normal. No renal or ureteral stones, or filling defects were seen on CT. At cytoscopy, bladder and urethra were normal, and bloody urine effluxed from the left ureteric orifice. The ureters were normal at diagnosis, and developed new abutting non-penetrating calcifications by 8 months. Pain episodes of complete incapacitating intensity of 2-4 h duration were reduced to 10 min with 5 mg crushed tadalafil administered at onset. If tadalafil was delayed to after onset, the original course of agony resulted. Daily tadalafil reduced loin pain intensity, but not the exacerbations. Tadalafil efficacy may indicate that the pain exacerbations are due to spasm of ureter smooth muscle. 5 mg tadalafil taken at onset alleviated severe loin pain exacerbations in this case of loin pain haematuria syndrome. 2015 BMJ Publishing Group Ltd.

  7. Reisifirmade TOP 40 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Reisifirmade TOP 40 aastal 2002. Reisifirmade TOP-i esikümme. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Reisifirmade üldandmed. Reisifirmade finantsandmed. Tehnilise käibe alusel arvutatud edetabelid: Reisifirmade TOP 25; Käibe TOP 40; Rentaabluse TOP 10; Käibe kasvu TOP 10

  8. Intergenerational Top Income Persistence

    DEFF Research Database (Denmark)

    Munk, Martin D.; Bonke, Jens; Hussain, M. Azhar

    2016-01-01

    In this paper, we investigate intergenerational top earnings and top income mobility in Denmark. Access to administrative registers allowed us to look at very small fractions of the population. We find that intergenerational mobility is lower in the top when including capital income in the income...... measure— for the rich top 0.1% fathers and sons the elasticity is 0.466. Compared with Sweden, however, the intergenerational top income persistence is about half the size in Denmark....

  9. Top quark property measurements in single top

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00386283; The ATLAS collaboration

    2016-01-01

    A review of the recent results on measurements of top quark properties in single top quark processes, performed at the LHC by ATLAS and CMS is presented. The measurements are in good agreement with predictions and no deviations from Standard Model expectations have been observed.

  10. Effect of packaging type during postmortem aging and degree of doneness on pork chop sensory traits of loins selected to vary in color and marbling.

    Science.gov (United States)

    Klehm, B J; King, D A; Dilger, A C; Shackelford, S D; Boler, D D

    2018-05-04

    The objective was to determine the interactions between packaging type and degree of doneness on sensory traits of pork loins classified based on the newly proposed USDA quality grades. A total of 144 loins were selected from 2 groups of pigs (lean growth or meat quality production focus) to represent as much variation in visual color and marbling as possible. Selection was achieved with a VQG grading camera. The ventral surface of the loins was evaluated for loin quality traits at 1 d postmortem. At 2 d postmortem loins were sliced into 28-mm-thick chops. Chop within each loin was randomly assigned to either individual vacuum packages or to individual Styrofoam trays and overwrapped in polyvinyl chloride (PVC) oxygen permeable film. Overwrapped PVC packages were then placed in bulk packages and flushed with a gas mixture that contained approximately 0.4% carbon monoxide, 30% carbon dioxide, and 80% nitrogen. Vacuum-packaged chops were aged until 14 d postmortem. Chops packaged in PVC overwrap were aged until 9 d postmortem in the bulk packages, then placed on simulated retail display until 14 d postmortem. Chops from each packaging type were cooked to an internal temperature of either 63 °C or 71 °C for the evaluation of slice shear force (SSF) or for evaluation of tenderness, juiciness, and flavor by a trained panel. Data were analyzed as split-split plot design with production focus of the pigs, proposed USDA quality grade, packaging type, and degree of doneness as fixed effects. While there were main effect differences between production focuses, there were no interactions with production focus. There were also no 3-way (P ≥ 0.19) interactions and only one 2-way interaction among quality grade, packaging type, or degree of doneness. There were no differences in sensory tenderness (P = 0.30), juiciness (P = 0.49), flavor (P = 0.89), SSF (P = 0.13), or cook loss (P = 0.06) among USDA quality grades. There were no differences in sensory tenderness (P = 0

  11. Audiitorfirmade TOP 50 aastal 2000

    Index Scriptorium Estoniae

    2001-01-01

    Audiitorfirmade käibe TOP 50, käibe kasvu TOP 25, käibe languse TOP 15, kasumi TOP 50, kasumi kasvu TOP 10, kasumi languse TOP 10, audiitorfirmade finantsnäitajad. Rentaabluse TOP 50, varade tootlikkuse TOP 50

  12. Top Production at LHCb

    CERN Multimedia

    Santana Rangel, Murilo

    2015-01-01

    Single and pair top production in the forward direction at the LHC allows for precision tests of the Standard Model. The observation of top quarks in 7 and 8 TeV data and prospects for precision measurements are shown.

  13. Selected nutrient contents, fatty acid composition, including conjugated linoleic acid, and retention values in separable lean from lamb rib loins as affected by external fat and cooking method.

    Science.gov (United States)

    Badiani, Anna; Montellato, Lara; Bochicchio, Davide; Anfossi, Paola; Zanardi, Emanuela; Maranesi, Magda

    2004-08-11

    Proximate composition and fatty acid profile, conjugated linoleic acid (CLA) isomers included, were determined in separable lean of raw and cooked lamb rib loins. The cooking methods compared, which were also investigated for cooking yields and true nutrient retention values, were dry heating of fat-on cuts and moist heating of fat-off cuts; the latter method was tested as a sort of dietetic approach against the more traditional former type. With significantly (P cooking losses, dry heating of fat-on rib-loins produced slightly (although only rarely significantly) higher retention values for all of the nutrients considered, including CLA isomers. On the basis of the retention values obtained, both techniques led to a minimum migration of lipids into the separable lean, which was higher (P cooking of the class of CLA isomers (including that of the nutritionally most important isomer cis-9,trans-11) was more similar to that of the monounsaturated than the polyunsaturated fatty acids.

  14. Changes in the phospholipid fraction of intramuscular fat from pork loin (fresh and marinated) with different irradiation and packaging during storage

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Marquez, I.; Narvaez-Rivas, M.; Gallardo, E.; Cabeza, C. M.; Leon-Camacho, M.

    2013-05-01

    A study on the effect of E-beam (1 and 2 kGy) on the phospholipid classes of fresh and marinated pork loin stored at 4 degree centigrade and 8 degree centigrade under different atmospheres (air, vacuum and carbon dioxide enriched atmospheres) has been conducted. This is the first time that a study of this kind has been carried out on these types of samples. The combined statistical treatment of the distinct variables shows that minor changes (cardiol pin and sphingomyelin between both types of loin, cardiolipin vs storage temperatures and phosphatidylethanolamine vs the modified atmospheres) are produced in the individual phospholipids subjected to the different selected conditions. The more relevant result was that no effect of the irradiation doses on the phospholipids classes was found, so the E-beam can be considered a useful tool to extend the shelf-life of fresh meat without changes in the phospholipid fraction. (Author) 24 refs.

  15. Top Physics at Atlas

    CERN Document Server

    Romano, M; The ATLAS collaboration

    2013-01-01

    This talk is an overview of recent results on top-quark physics obtained by the ATLAS collaboration from the analysis of p-p collisions at 7 and 8 TeV at the Large Hadron Collider. Total and differential top pair cross section, single top cross section and mass measurements are presented.

  16. Physical properties of Gelidium corneum-gelatin blend films containing grapefruit seed extract or green tea extract and its application in the packaging of pork loins.

    Science.gov (United States)

    Hong, Y-H; Lim, G-O; Song, K B

    2009-01-01

    Edible Gelidium corneum-gelatin (GCG) blend films containing grapefruit seed extract (GFSE) or green tea extract (GTE) were manufactured, and the quality of pork loins packed with the film during storage was determined. Tensile strength (TS) and water vapor permeability (WVP) of the films containing GFSE or GTE were better than those of the control. The film's antimicrobial activity against Escherichia coli O157:H7 and Listeria monocytogenes increased with increasing antimicrobial concentration, resulting in a decrease in the populations of bacteria by 0.77 to 2.08 and 0.91 to 3.30 log CFU/g, respectively. Pork loin samples were inoculated with E. coli O157:H7 and L. monocytogenes. The samples packed with the GCG film containing GFSE (0.08%) or GTE (2.80%) had a decrease in the populations of E. coli O157:H7 and L. monocytogenes of 0.69 to 1.11 and 1.05 to 1.14 log CFU/g, respectively, compared to the control after 4 d of storage. The results showed that the quality of pork loins during storage could be improved by packaging them with the GCG film containing GFSE or GTE.

  17. Severe loin pain following renal biopsy in a high-risk patient: A case report of a rare combination of pseudoaneurysm and arterio-venous fistula

    Directory of Open Access Journals (Sweden)

    Desai Madhav

    2011-01-01

    Full Text Available We report a 50-year-old male patient with diabetes mellitus and hypertension who presented with low-grade fever, anuria and renal failure. He had no prior history of nephropathy and retinopathy. Since anuria persisted, a renal biopsy was performed using automated gun, under ultrasound guidance. Two hours after the renal biopsy was performed, the patient developed severe left loin pain that required analgesics and sedatives. Ultrasound of the abdomen performed immediately, two hours and four hours after the biopsy, did not reveal any hematoma. The hemoglobin was stable when the patient developed loin pain, but after eight hours decreased to 9.1 g/dL, and computed tomography scan of the abdomen revealed a big peri-nephric hematoma around the left kidney. He was managed with blood transfusions and a selective angiogram was done. It revealed a pseudoaneurysm and arterio-venous fistula from the segmental artery of lower pole of the left kidney; both were closed by using microcoils and liquid embolic agent N-butyl-cyanoacrylate (NBCA. The only risk factor the patient had at the time of renal biopsy was severe renal failure. Our case suggests that severe loin pain immediately after renal biopsy in a patient with renal failure warrants careful follow-up of hemoglobin and imaging, even if initial imaging is normal. Further fall of hemoglobin necessitates early evaluation with angiogram, which helps in diagnosing the treatable, although rare, complications like pseudoaneurysm and arterio-venous fistula.

  18. CDF Top Physics

    Science.gov (United States)

    Tartarelli, G. F.; CDF Collaboration

    1996-05-01

    The authors present the latest results about top physics obtained by the CDF experiment at the Fermilab Tevatron collider. The data sample used for these analysis (about 110 pb{sup{minus}1}) represents almost the entire statistics collected by CDF during four years (1992--95) of data taking. This large data size has allowed detailed studies of top production and decay properties. The results discussed here include the determination of the top quark mass, the measurement of the production cross section, the study of the kinematics of the top events and a look at top decays.

  19. Effect of added phosphate and type of cooking method on physico-chemical and sensory features of cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Pérez-Palacios, Trinidad; Ruiz, Jorge

    2014-05-01

    This study evaluated the effect of brining with phosphates on the physico-chemical and sensory features of sous-vide and roasted cooked lamb. Lamb loins (n=48) were injected with either 10% w/w of distilled water or a solution containing 0.2% or 0.4% (w/v) of a mixture of phosphate salts. After injection, samples were either sous-vide cooked (12h-60°C) or oven roasted (180°C until 73°C of core temp.). Expressible moisture, cooking loss, instrumental color, pH, water holding capacity, instrumental texture and sensory properties were evaluated. Brining with phosphates led to lower cooking loss in both sous-vide and oven roasted samples, but only the former showed significantly higher moisture content. Phosphates increased instrumental hardness and shear force values in sous-vide samples, while this effect was not as evident in roasted ones. Toughness was reduced and juiciness was improved as a consequence of phosphate addition. Overall, injection of a phosphate solution appears as a potential procedure for improving sensory textural features of cooked lamb whole cuts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Influence of PA6 nanocomposite films on the stability of vacuum-aged beef loins during storage in modified atmospheres.

    Science.gov (United States)

    Picouet, P A; Fernandez, A; Realini, C E; Lloret, E

    2014-01-01

    A masterbatch of polyamide 6 (PA6) containing dispersed nanoclays, was used to fabricate a novel multilayer film for vacuum packed meat. Performance of the nanocomposite was compared to a control PA6 multilayer and a high barrier commercial film. Addition of nanoclays improved oxygen barrier properties, UV-blocking capability and stiffness. Beef loins were vacuum-aged using the three films for 0 7, 14 and 21 days at 2°C. After each ageing time, beef steaks were packaged in commercial trays and high oxygen atmosphere and stored at 4°C for 9 days. Beef quality parameters and gas content were studied during display time in MAP (1, 3, 6 and 9 d). Beef quality parameters were not influenced by the packaging materials used during ageing and the performance of nanocomposites was comparable to high barrier films. Ageing had a positive impact on the stabilization of redness up to day 6 in MAP. Thereafter, oxymyoglobin content and oxidation levels were negatively influenced by ageing. © 2013.

  1. Stability of Antiradical Activity of Protein Extracts and Hydrolysates from Dry-Cured Pork Loins with Probiotic Strains of LAB

    Directory of Open Access Journals (Sweden)

    Paulina Kęska

    2018-04-01

    Full Text Available The application of starter cultures to improve quality and safety has become a very common practice in the meat industry. Probiotic strains of lactic acid bacteria (LAB can also bring health benefits by releasing bioactive peptides. The aim of this work was to evaluate the stability of antiradical activity of protein extracts from LAB-inoculated dry-cured pork loins during long-term aging and evaluate their hydrolysates after simulated gastrointestinal digestion. Analyses of hydrolysates by using liquid chromatography-tandem mass spectrometry (LC-MS/MS were strengthened with in silico analysis. The highest antiradical activity of the protein extracts was observed after 180 days of aging. The influence of the strain used (LOCK, BAUER, or BB12 on the inactivation ability of ABTS radicals varied during long-term aging. The IC50 values indicated the higher antiradical properties of salt-soluble (SSF compared to water-soluble fraction (WSF of proteins. The peptides generated by in vitro digestion have MW between 700 and 4232 Da and their length ranged from 5 to 47 amino acids in a sequence where Leu, Pro, Lys, Glu, and His had the largest share. This study demonstrates that the degradation of pork muscle proteins during gastrointestinal digestion may give rise to a wide variety of peptides with antiradical properties.

  2. Turismifirmade 2000. a. TOP 30

    Index Scriptorium Estoniae

    2001-01-01

    Turismiettevõtete üldandmed: turismiettevõtete finantsnäitajad; käibe TOP 30; käibe kasvu TOP 10; kasumi TOP 20; kasumi kasvu TOP 10; kasumi languse TOP; rentaabluse TOP 10; varade tootlikkuse TOP 10

  3. Ehitusmaterjalitootjate TOP 70 aastal 2003

    Index Scriptorium Estoniae

    2004-01-01

    Ilmunud ka: Delovõje Vedomosti : Stroitelstvo, 29. sept. 2004, lk. 2,4. Ehitusmaterjalitootjate TOP 70; Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP. Ehitusmaterjalitootjate üldandmed

  4. TOP LINAC design; Progetto del TOP LINAC

    Energy Technology Data Exchange (ETDEWEB)

    Picardi, L; Ronsivalle, C; Vignati, A [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione

    1997-11-01

    The report describes a linear accelerator for protons named TOP LINAC designed for the TOP (Terapia Oncologica con Protoni, Oncological Protontherapy) project launched by the Italian National Institute of Health (Istituto Superiore di Sanita`, ISS) to explore in collaboration with the biggest Oncological Hospital in Rome (Istituto Regina Elena, IRE) the potentialities of the therapy with accelerated protons and establish guide lines for the application of this new type of radiotherapy in comparison with the more traditional electron and x-rays radiotherapy. The concept of a compact accelerator for protontherapy applications bore within the Italian Hadrontherapy Collaboration (TERA Collaboration) with the aim to diffuse the protontherapy on the National territory. The ISS program plans to use the TOP linac proton beam also for production of PET (Positron Emission Tomography) radioisotopes and radiobiology studies. Official agreements are in course between ISS and ENEA which provides its experience in the industrial and medical accelerators for the design and the construction of the TOP linac. The accelerator that will be the first 3 GHz proton linac in the world, will be composed of a 428.3 MHz 7 Me V RFQ + DTL injector followed by a 7-65 Me V section of a 3 GHz SCDTL structure and a 65 - 200 Me V variable energy SCL 3 GHz structure. In particular the SCDTL section uses a highly innovative accelerating structure patented by ENEA. In this report the clinical and physical requests are discussed and a preliminary design of the whole machine is given.

  5. Ekspedeerimisettevõtete TOP 50

    Index Scriptorium Estoniae

    2006-01-01

    Ilmunud ka: Delovõje Vedomosti : Transport i Logistika nr. 11, 29. nov. lk. 32-35. Ekspedeerimisettevõtete TOP. Vt. samas: Käibe TOP 10; Käibekasvu TOP 10; Kasumi TOP 10; Kasumikasvu TOP 10; Rentaabluse TOP 10; ROE TOP 10; Ekspedeerimisettevõtete üld- ja finantsandmed. Ajal. Delovõje Vedomosti : Transport i Logistika toodud ainult Ekspedeerimisettevõtete TOP 50

  6. Characterization and functional inferences of a genome-wide DNA methylation profile in the loin ( muscle of swine

    Directory of Open Access Journals (Sweden)

    Woonsu Kim

    2018-01-01

    Full Text Available Objective DNA methylation plays a major role in regulating the expression of genes related to traits of economic interest (e.g., weight gain in livestock animals. This study characterized and investigated the functional inferences of genome-wide DNA methylome in the loin (longissimus dorsi muscle (LDM of swine. Methods A total of 8.99 Gb methylated DNA immunoprecipitation sequence data were obtained from LDM samples of eight Duroc pigs (four pairs of littermates. The reference pig genome was annotated with 78.5% of the raw reads. A total of 33,506 putative methylated regions (PMR were identified from methylated regions that overlapped at least two samples. Results Of these, only 3.1% were commonly observed in all eight samples. DNA methylation patterns between two littermates were as diverse as between unrelated individuals (p = 0.47, indicating that maternal genetic effects have little influence on the variation in DNA methylation of porcine LDM. The highest density of PMR was observed on chromosome 10. A major proportion (47.7% of PMR was present in the repeat regions, followed by introns (21.5%. The highest conservation of PMR was found in CpG islands (12.1%. These results show an important role for DNA methylation in species- and tissue-specific regulation of gene expression. PMR were also significantly related to muscular cell development, cell-cell communication, cellular integrity and transport, and nutrient metabolism. Conclusion This study indicated the biased distribution and functional role of DNA methylation in gene expression of porcine LDM. DNA methylation was related to cell development, cell-cell communication, cellular integrity and transport, and nutrient metabolism (e.g., insulin signaling pathways. Nutritional and environmental management may have a significant impact on the variation in DNA methylation of porcine LDM.

  7. Top Quark Physics

    International Nuclear Information System (INIS)

    Larios, F.

    2006-01-01

    We give an overview of the physics of the Top quark, from the experimental discovery to the studies of its properties. We review some of the work done on the Electroweak and Flavor Changing couplings associated with the Top quark in the Standard Model and beyond. We will focus on the specific contribution of phycisits working in Mexico and Mexican physicists working abroad

  8. Top quark theory

    NARCIS (Netherlands)

    Laenen, E.

    2012-01-01

    The theoretical aspects of a number of top quark properties such as its mass and its couplings are reviewed. Essential aspects in the theoretical description of top quark production, singly, in pairs and in association, as well as its decay related to spin and angular correlations are discussed.

  9. Top physics at CDF

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, R.E. [Univ. of Rochester, NY (United States)

    1997-01-01

    We report on top physics results using a 100 pb{sup -1} data sample of p{bar p} collisions at {radical}s = 1.8 TeV collected with the Collider Detector at Fermilab (CDF). We have identified top signals in a variety of decay channels, and used these channels to extract a measurement of the top mass and production cross section. A subset of the data (67 pb{sup -1}) is used to determine M{sub top} = 176 {+-} 8(stat) {+-} 10(syst) and {sigma}(tt) = 7.6 {sub -2.0}{sup +2.4} pb. We present studies of the kinematics of t{bar t} events and extract the first direct measurement of V{sub tb}. Finally, we indicate prospects for future study of top physics at the Tevatron.

  10. Top Quark Mass

    CERN Document Server

    Mulders, Martijn

    2016-01-01

    Ever since the discovery of the top quark at the Tevatron collider in 1995 the measurement of its mass has been a high priority. As one of the fundamental parameters of the Standard Theory of particle physics, the precise value of the top quark mass together with other inputs provides a test for the self-consistency of the theory, and has consequences for the stability of the Higgs field that permeates the Universe. In this review I will briefly summarize the experimental techniques used at the Tevatron and the LHC experiments throughout the years to measure the top quark mass with ever improving accuracy, and highlight the recent progress in combining all measurements in a single world average combination. As experimental measurements became more precise, the question of their theoretical interpretation has become important. The difficulty of relating the measured quantity to the fundamental top mass parameter has inspired alternative measurement methods that extract the top mass in complementary ways. I wil...

  11. Top quark mass measurement

    International Nuclear Information System (INIS)

    Maki, Tuula; Helsinki Inst. of Phys.; Helsinki U. of Tech.

    2008-01-01

    The top quark is the heaviest elementary particle. Its mass is one of the fundamental parameters of the standard model of particle physics, and an important input to precision electroweak tests. This thesis describes three measurements of the top-quark mass in the dilepton decay channel. The dilepton events have two neutrinos in the final state; neutrinos are weakly interacting particles that cannot be detected with a multipurpose experiment. Therefore, the signal of dilepton events consists of a large amount of missing energy and momentum carried off by the neutrinos. The top-quark mass is reconstructed for each event by assuming an additional constraint from a top mass independent distribution. Template distributions are constructed from simulated samples of signal and background events, and parameterized to form continuous probability density functions. The final top-quark mass is derived using a likelihood fit to compare the reconstructed top mass distribution from data to the parameterized templates. One of the analyses uses a novel technique to add top mass information from the observed number of events by including a cross-section-constraint in the likelihood function. All measurements use data samples collected by the CDF II detector

  12. Top physics in WHIZARD

    Energy Technology Data Exchange (ETDEWEB)

    Reuter, Juergen; Chokoufe Nejad, Bijan [DESY, Hamburg (Germany). Theory Group; Bach, Fabian [European Commission, Eurostat, Luxembourg (Luxembourg); Hoang, Andre [Vienna Univ. (Austria). Faculty of Physics; Vienna Univ. (Austria). Erwin Schroedinger International Inst. for Mathematical Physics; Kilian, Wolfgang [Siegen Univ. (Germany); Stahlhofen, Maximilian [Mainz Univ. (Germany). PRISMA Cluster of Excellence; Teubner, Thomas [Liverpool Univ. (United Kingdom). Dept. of Mathematical Sciences; Weiss, Christian [DESY, Hamburg (Germany). Theory Group; Siegen Univ. (Germany)

    2016-03-15

    In this talk we summarize the top physics setup in the event generator WHIZARD with a main focus on lepton colliders. This includes full six-, eight- and ten-fermion processes, factorized processes and spin correlations. For lepton colliders, QCD NLO processes for top quark physics are available and discussed. A special focus is on the top-quark pair threshold, where a special implementation combines a non-relativistic effective field theory calculation augmented by a next-to-leading threshold logarithm resummation with a continuum relativistic fixed-order QCD NLO simulation.

  13. Top physics in WHIZARD

    International Nuclear Information System (INIS)

    Reuter, Juergen; Chokoufe Nejad, Bijan; Hoang, Andre; Stahlhofen, Maximilian

    2016-03-01

    In this talk we summarize the top physics setup in the event generator WHIZARD with a main focus on lepton colliders. This includes full six-, eight- and ten-fermion processes, factorized processes and spin correlations. For lepton colliders, QCD NLO processes for top quark physics are available and discussed. A special focus is on the top-quark pair threshold, where a special implementation combines a non-relativistic effective field theory calculation augmented by a next-to-leading threshold logarithm resummation with a continuum relativistic fixed-order QCD NLO simulation.

  14. Top quark discovered

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Nine months after a careful announcement of tentative evidence for the long-awaited sixth 'top' quark, physicists from the CDF and DO experiments at Fermilab's Tevatron proton-antiproton collider declared on 2 March that they had finally discovered the top quark. Last year (June 1994, page 1), the CDF experiment at the Tevatron reported a dozen candidate top events. These, said CDF, had all the characteristics expected of top, but the difficulties of extracting the tiny signal from a trillion proton-antiproton collisions made them shy of claiming a discovery. For its part, the companion DO Tevatron experiment reported a few similar events but were even more guarded about their interpretation as top quarks. Just after these hesitant announcements, performance at the Tevatron improved dramatically last summer. After the commissioning of a new linear accelerator and a magnet realignment, the machine reached a new world record proton-antiproton collision luminosity of 1.28 x 10 31 per sq cm per s, ten times that originally planned. Data began to pour in at an unprecedented rate and the data sample grew to six trillion collisions. Luminosity has subsequently climbed to 1.7 x 10 31 . The top quark is the final letter in the alphabet of Standard Model particles. According to this picture, all matter is composed of six stronglyinteracting subnuclear particles, the quarks, and six weakly interacting particles, the leptons. Both sextets are neatly arranged as three pairs in order of increasing mass. The fifth quark, the 'beauty' or 'b' quark, was also discovered at Fermilab, back in 1977. Since then physicists have been eagerly waiting for the top to turn up, but have been frustrated by its heaviness - the top is some 40 times the mass of its 'beautiful' partner. Not only is the top quark the heaviest by far, but it is the only quark which has been actively hunted. After the quarry was glimpsed last year, the net has now been

  15. KILT (Kidney and IVC Abnormalities with Leg Thrombosis) Syndrome in a 41-Years-Old Man with Loin Pain and Fever.

    Science.gov (United States)

    Fung, James Kiujing; Yeung, Victor Hip Wo; Chu, Sau Kwan; Man, Chi Wan

    2017-05-01

    KILT syndrome is a rare condition composing the triad of kidney and inferior vena cava anomaly and extensive venous thrombosis. We present a case of newly diagnosed KILT syndrome in a 41-years-old gentleman presenting with loin pain and fever. Reviewing previous case reports, KILT syndrome is usually an incidental finding on imaging studies and there is a wide scope of initial clinical presentations. However, recent evidence suggests IVC anomaly may have caused subsequent renal hypoplasia. Identification of the underlying etiology may be helpful in planning early vascular intervention to treat the condition.

  16. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors

    DEFF Research Database (Denmark)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia

    2015-01-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied....... FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more...

  17. Audiitorite TOP 50 aastal 2005

    Index Scriptorium Estoniae

    2006-01-01

    Audiitorite TOP. Vt. samas: Käibe TOP 10; Käibe kasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; ROE TOP 10; Ketlin Priilinn. Kasvu tagavad lojaalsed kliendid; Klient on audiitori parim müügimees; Teeli Remmelg. Kliendid vaatavad pigem kvaliteeti kui madalat hinda. Kommenteerivad Signe Keernik ja Kalle Lahe. Tabel: Audiitoriettevõtete üld- ja finantsandmed

  18. Jõgevamaa ettevõtete TOP 55

    Index Scriptorium Estoniae

    2004-01-01

    Jõgevamaa ettevõtete TOP 55 aastal 2003. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Jõgevamaa firmade üld- ja finantsandmed

  19. Põlvamaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2004-01-01

    Ettevõtete TOP 50. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Põlvamaa firmade üldandmed. Põlvamaa firmade finantsandmed

  20. Viljandimaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Viljandimaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Viljandimaa ettevõtete üld- ja finantsandmed

  1. Jõgevamaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Jõgevamaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Jõgevamaa ettevõtete üld- ja finantsandmed

  2. Boosted tops at ATLAS

    CERN Document Server

    Villaplana, M; The ATLAS collaboration

    2011-01-01

    A sample of candidate events for highly boosted top quarks is selected following the standard ATLAS selection for semi-leptonic ttbar events plus a requirement that the invariant mass of the reconstructed ttbar pair is greater than 700 GeV. Event displays are presented for the most promising candidates, as well as quantitative results for observables designed to isolate a boosted top quark signal.

  3. Telekommunikatsiooni & arvutitootjate TOP

    Index Scriptorium Estoniae

    2006-01-01

    Telekommunikatsiooni TOP 30. Tabelid. Vt. samas: Indrek Kald. Elisa ka tänavu esikohal; Väike Tele2 võidab paindlikkusest; Kernel läks üle piiri. Diagrammid. Arvutifirmade TOP 100. Tabelid. Vt. samas: Enn Heinsoo. Esikoha tõi kontori müük; Proeksperdil suund välisturgudele;¡ Ida-Eesti turg arenevale firmale kitsas. Diagrammid. Nimekiri: Omanikud

  4. Biochemical, Oxidative, and Lipolytic Changes during Vacuum-Packed Storage of Dry-Cured Loin: Effect of Chestnuts Intake by Celta Pigs

    Directory of Open Access Journals (Sweden)

    María Gómez

    2018-01-01

    Full Text Available The effect of the inclusion of chestnuts in the finishing diet of Celta pig breed on the characteristics of dry-cured loin, a traditional Spanish dry-cured meat product, after the manufacturing process and the vacuum-packed storage was studied. In general, no significant differences between the diets (chestnut, mixed, and concentrate diet were obtained for physicochemical (moisture, intramuscular fat, and titratable acidity and lipolytic parameters. Lower pH and higher values for oxidation parameters (peroxide and TBA values were obtained in loins from pigs fed with chestnuts. However, no differences were found for fatty acids from the different lipid fractions when diets were compared, with the exception of some minor fatty acids. Free fatty acids represented over 2.7% of the fat in the final product. The distinction between diets was procured when a discriminant canonical analysis was performed for fatty acid contents. After vacuum-packed storage, only a slight evolution of the studied parameters was obtained.

  5. Physicochemical and microbiological changes during the refrigerated storage of lamb loins sous-vide cooked at different combinations of time and temperature.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Hernández, Alejandro; Ruiz, Jorge

    2015-10-01

    This study aimed to determine the influence of cooking temperature (either 60 ℃ or 80 ℃) and time (6 h or 24 h) on the physicochemical (weight loss, moisture content, instrumental color, instrumental texture, lipid and protein oxidation) and microbiological changes underwent by sous-vide cooked lamb loins during refrigerated storage for 30 days. There was a slight trend to decreasing weight losses in some of the cooking treatments, but only in samples cooked at 60 ℃ for 6 h it was paralleled with an increase in moisture content. The only noteworthy oxidative change was a marked decrease in conjugated dienes after two weeks of storage in samples cooked at 80 ℃ for 24 h. Neither instrumental texture nor color showed noticeable variations during the storage. Microbial population remained quite low during the whole refrigerated storage. Overall, most of the studied parameters showed only scarce changes throughout 30 days of refrigerated storage that most likely would not influence the quality of sous-vide cooked loin lambs. © The Author(s) 2014.

  6. Prediction of intramuscular fat content and shear force in Texel lamb loins using combinations of different X-ray computed tomography (CT) scanning techniques.

    Science.gov (United States)

    Clelland, N; Bunger, L; McLean, K A; Knott, S; Matthews, K R; Lambe, N R

    2018-06-01

    Computed tomography (CT) parameters, including spiral computed tomography scanning (SCTS) parameters, intramuscular fat (IMF) and mechanically measured shear force were derived from two previously published studies. Purebred Texel (n = 377) of both sexes, females (n = 206) and intact males (n = 171) were used to investigate the prediction of IMF and shear force in the loin. Two and three dimensional CT density information was available. Accuracies in the prediction of shear force and IMF ranged from R 2 0.02 to R 2 0.13 and R 2 0.51 to R 2 0.71 respectively, using combinations of SCTS and CT scan information. The prediction of mechanical shear force could not be achieved at an acceptable level of accuracy employing SCTS information. However, the prediction of IMF in the loin employing information from SCTS and additional information from standard CT scans was successful, providing evidence that the prediction of IMF and related meat eating quality (MEQ) traits for Texel lambs in vivo can be achieved. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

    2013-03-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Toujours plus loin

    CERN Multimedia

    2004-01-01

    La Suisse Assurances has the pleasure to have CERN rank amongst its clients. The largest particle physics laboratory in the world celebrates its 50th anniversary this year. For this occasion, La Suisse had the opportunity to learn more about the accelerator and detectors (2 pages)

  9. TOP2017 Experimental summary

    CERN Document Server

    Giammanco, Andrea

    2017-01-01

    Thanks to the unprecedentedly fast accumulation of high-energy data at the LHC during the ongoing Run~2, most of the traditional top-quark analyses are experiencing the luxury of having to worry about how to punch through the ``Systematics Wall'', and think about new ways to maximize the utility of their data. New processes involving top quarks are being studied for the first time, and the good old pair-production processes are being explored in unusual settings, such as collisions involving heavy ions, or ``reference data'' collected by the LHC at relatively low centre-of-mass energy. The TOP2017 conference featured 37 talks delivered by experimental physicists, including seven in the ``Young Scientists Forum'' where young colleagues were given the opportunity to elaborate more deeply than usual on their own work. As it is impossible to do justice to all the experimental resu...

  10. Top-ophilia

    Energy Technology Data Exchange (ETDEWEB)

    Quigg, Chris; /Fermilab

    2008-01-01

    Almost from the moment in June 1977 when the discovery of the Upsilon resonance revealed the existence of what we now call the bottom quark, physicists began searching for its partner. Through the years, as we established the electric charge and weak isospin of the b-quark, and detected the virtual influence of its mate, it became clear that the top quark must exist. Exactly at what mass, we couldn't say, but we knew just how top events would look. We also knew that top events would be rare--if the Tevatron could make them at all--and that picking out the events would pose a real challenge for the experimenters and their detectors.

  11. TOP LINAC design

    International Nuclear Information System (INIS)

    Picardi, L.; Ronsivalle, C.; Vignati, A.

    1997-11-01

    The report describes a linear accelerator for protons named TOP LINAC designed for the TOP (Terapia Oncologica con Protoni, Oncological Protontherapy) project launched by the Italian National Institute of Health (Istituto Superiore di Sanita', ISS) to explore in collaboration with the biggest Oncological Hospital in Rome (Istituto Regina Elena, IRE) the potentialities of the therapy with accelerated protons and establish guide lines for the application of this new type of radiotherapy in comparison with the more traditional electron and x-rays radiotherapy. The concept of a compact accelerator for protontherapy applications bore within the Italian Hadrontherapy Collaboration (TERA Collaboration) with the aim to diffuse the protontherapy on the National territory. The ISS program plans to use the TOP linac proton beam also for production of PET (Positron Emission Tomography) radioisotopes and radiobiology studies. Official agreements are in course between ISS and ENEA which provides its experience in the industrial and medical accelerators for the design and the construction of the TOP linac. The accelerator that will be the first 3 GHz proton linac in the world, will be composed of a 428.3 MHz 7 Me V RFQ + DTL injector followed by a 7-65 Me V section of a 3 GHz SCDTL structure and a 65 - 200 Me V variable energy SCL 3 GHz structure. In particular the SCDTL section uses a highly innovative accelerating structure patented by ENEA. In this report the clinical and physical requests are discussed and a preliminary design of the whole machine is given

  12. Top emitting white OLEDs

    Energy Technology Data Exchange (ETDEWEB)

    Freitag, Patricia; Luessem, Bjoern; Leo, Karl [Technische Universitaet Dresden, Institut fuer Angewandte Photophysik, George-Baehr-Strasse 1, 01069 Dresden (Germany)

    2009-07-01

    Top emitting organic light emitting diodes (TOLEDs) provide a number of interesting opportunities for new applications, such as the opportunity to fabricate ITO-free devices by using opaque substrates. This makes it possible to manufacture low cost OLEDs for signage and lighting applications. A general top emitting device consists of highly reflecting metal contacts as anode and semitransparent cathode, the latter one for better outcouling reasons. In between several organic materials are deposited as charge transporting, blocking, and emission layers. Here, we show a top emitting white organic light emitting diode with silver electrodes arranged in a p-i-n structure with p- and n-doped charge transport layers. The centrical emission layer consists of two phosphorescent (red and green) and one fluorescent (blue) emitter systems separated by an ambipolar interlayer to avoid mutual exciton quenching. By adding an additional dielectric capping layer on top of the device stack, we achieve a reduction of the strong microcavity effects which appear due to the high reflection of both metal electrodes. Therefore, the outcoupled light shows broad and nearly angle-independent emission spectra, which is essential for white light emitting diodes.

  13. Top quark theory

    Indian Academy of Sciences (India)

    2012-10-04

    Oct 4, 2012 ... The theoretical aspects of a number of top quark properties such as ... to the quadratic divergences of the Higgs self-energy, while yet, ..... given in the literature, each with the aim of recovering a well-behaved expansion in αs.

  14. Top quark properties

    Indian Academy of Sciences (India)

    eter for the tests of the electroweak theory, since radiative corrections to many ... The uncertainty due to jet energy scale (JES) is the dominating systematic .... In the Standard Model, the charge of the top quark is predicted to be that of a normal up- ..... non-negative and f+ + f0 < 1, and the star marks the expectation from the ...

  15. Anomalous top magnetic couplings

    Indian Academy of Sciences (India)

    2012-11-09

    Nov 9, 2012 ... Corresponding author. E-mail: remartinezm@unal.edu.co. Abstract. The real and imaginary parts of the one-loop electroweak contributions to the left and right tensorial anomalous couplings of the tbW vertex in the Standard Model (SM) are computed. Keywords. Top; anomalous. PACS Nos 14.65.Ha; 12.15 ...

  16. CPT analysis with top physics

    Energy Technology Data Exchange (ETDEWEB)

    Cembranos, Jose A. R., E-mail: cembra@fis.ucm.es [Universidad Complutense de Madrid, Departamento de Fisica Teorica I (Spain)

    2013-03-15

    We discuss the possibility of observing CPT violation from top anti-top production in hadronic colliders. We study a general approach by analyzing constraints on the mass difference between the top and anti-top quarks. We present current bounds from Tevatron data, and comment on the prospects for improving these bounds at the LHC and the ILC.

  17. Top Quark Properties at Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Lysák, Roman [Prague, Inst. Phys.

    2017-11-27

    The latest CDF and D0 experiment measurements of the top quark properties except the top quark mass are presented. The final combination of the CDF and D0 forward-backward asymmetry measurements is shown together with the D0 measurements of the inclusive top quark pair cross-section as well as the top quark polarization.

  18. Landfill Top Covers

    DEFF Research Database (Denmark)

    Scheutz, Charlotte; Kjeldsen, Peter

    2011-01-01

    The purpose of the final cover of a landfill is to contain the waste and to provide for a physical separation between the waste and the environment for protection of public health. Most landfill covers are designed with the primary goal to reduce or prevent infiltration of precipitation...... into the landfill in order to minimize leachate generation. In addition the cover also has to control the release of gases produced in the landfill so the gas can be ventilated, collected and utilized, or oxidized in situ. The landfill cover should also minimize erosion and support vegetation. Finally the cover...... is landscaped in order to fit into the surrounding area/environment or meet specific plans for the final use of the landfill. To fulfill the above listed requirements landfill covers are often multicomponent systems which are placed directly on top of the waste. The top cover may be placed immediately after...

  19. Computing Z-top

    International Nuclear Information System (INIS)

    Kashani-Poor, A.K.

    2014-01-01

    The topological string presents an arena in which many features of string theory proper, such as the interplay between world-sheet and target space descriptions or open-closed duality, can be distilled into computational techniques which yield results beyond perturbation theory. In this thesis, I will summarize my research activity in this area. The presentation is organized around computations of the topological string partition function Z-top based on various perspectives on the topological string. (author)

  20. Top of the list

    International Nuclear Information System (INIS)

    Cameron, A.; Vries, E. de

    2006-01-01

    In this article the authors look at how the major turbine suppliers fared in the year 2005, and look forward to 2006 which could be the best ever for the wind industry. The world wind turbine market continues to be dominated by ten major companies, who together account for almost 100% of the total global market. Although there are some new companies on the horizon it is the ten major companies that the authors concentrate on, in particular the top three, Vestas, Gamesa and Enercon who between them control 66% of the market. They give their overall report on business in 2005 and give their predictions for 2006. By far the leading wind turbine supplier is the Danish Company Vestas, accounting for over 30% of the global market. However all of the top ten companies report a successful year and all are expecting an even better 2006. This paper also reports on potential newcomers to the industry, one of these is California-based Clipper Windpower which commenced manufacturing the 2.5 MW Liberty turbine in Iowa. Chinese manufacturer Goldwind is also looking to enter the market having acquired a licence to produce the Vensys 1.2 MW turbine. It may well be that changes are on the way, there will be jockeying for position at the top and newcomers will want to make an impression on the market

  1. Effects of modified atmosphere, associated with masterpack transport packaging, and refrigerated storage time on the quality characteristics of pork loin cuts

    Directory of Open Access Journals (Sweden)

    Alessandra F. Rosa

    2013-10-01

    Full Text Available The objective of this research was to study the effects of modified atmosphere, associated with masterpack transport packaging, and refrigerated storage time on the quality characteristics of pork loin cuts. Cuts of pork loin were packaged in trays, covered with poly(vinyl chloride film. The trays were placed in a masterpack (MP, containing three gas compositions:  A 75% O2 : 25% CO2, B 50% O2 : 50% CO2 or C 100% CO2, and stored at 2 °C. Samples were taken after 1, 8, 15, and 22 days of storage, and evaluated for numerous shelf life traits. The development of Psychrotrophic aerobic bacteria and Pseudomonas spp. was found from the 15th day of storage. There was a significant treatment effect for some of the considered parameters, such as pH (P < 0.05 and color [L* (P < 0.07, a* (P < 0.07 and b* (P < 0.01]. There was a significant interaction (P < 0.01 for the TBARS values. It can be concluded, from the microbiological point of view, that the use of modified atmospheres containing 25% to 100% CO2 promotes the conservation of meat for up to 15 days of storage under refrigeration. From the point of view of color, atmospheres containing 75% O2 : 25% CO2 and 50% O2 : 50% CO2 ensure the color of packaged pork meat when stored at 2 °C for up to 15 days. From the point of view of lipid oxidation, packages with 100% CO2 are recommended for storage periods of more than 15 days, whereas those with 75% O2 : 25% CO2 are recommended for storage periods of up to 8 days.

  2. Effects of feeding ractopamine hydrochloride (Paylean) to physical and immunological castrates (Improvest) in a commercial setting on carcass cutting yields and loin quality.

    Science.gov (United States)

    Lowe, B K; Gerlemann, G D; Carr, S N; Rincker, P J; Schroeder, A L; Petry, D B; McKeith, F K; Allee, G L; Dilger, A C

    2014-08-01

    Effects of feeding ractopamine (RAC; 5 mg/kg) to physically castrated (PC) and immunologically castrated (IC) pigs on carcass characteristics, cutting yields, and loin quality were evaluated using 285 carcasses. Male pigs were randomly assigned to sex treatments (PC and IC) at birth and fed the same nursery diets before allotment into 32 pens with 22 pigs per pen in a grow-finish barn. Pigs in the PC group were physically castrated at approximately 5 d of age, and pigs in the IC group were administered Improvest at 11 and 18 wk of age. Diet treatments (control or RAC) were initiated on study d 87. Pigs were marketed at 12 d (4.5 wk post-second Improvest dose), 19 d (5.5 wk post-second Improvest dose), and 33 d (7.5 wk post-second Improvest dose) following the start of final diet treatments. Three carcasses per pen were selected for evaluation of cutting yields and loin quality. Data were analyzed using PROC MIXED in SAS with fixed effects of sex, diet, market group, and their interaction; carcass (N = 285) was the experimental unit. Carcasses from RAC-fed pigs were heavier (P cutting yields, RAC-fed carcasses had greater (P ≤ 0.03) bone-in lean and total carcass cutting yields than control-fed carcasses while there were no differences (P > 0.05) between RAC-fed and control-fed carcasses when evaluating LM color, marbling, firmness, pH, drip loss, and tenderness. Carcasses from IC pigs had greater (P cutting yields than PC carcasses. There were minimal differences (P cutting yields, LM color, marbling and firmness scores, pH, purge loss, composition, and tenderness. The results from this study indicated RAC and immunological castration were additive in terms of improving carcass cutting yields while having minimal effects on pork quality.

  3. Top quark measurements at ATLAS

    CERN Document Server

    Grancagnolo, Sergio; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, this gives us the unique opportunity to probe the properties of bare quarks at the Large Hadron Collider. This talk will present highlights of a few recent precision measurements by the ATLAS Collaboration of the top quark using 13 TeV and 8 TeV collision data: top-quark pair and single top production cross sections including differential distributions will be presented alongside top quark properties measurements. These measurements, including results using boosted top quarks, probe our understanding of top quark production in the TeV regime. Measurements of the top quark mass and searches for rare top quark decays are also presented.

  4. Top quark measurements at ATLAS

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00041686; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, it allows us to probe the properties of bare quarks at the Large Hadron Collider. Highlights of a few recent precision measurements by the ATLAS Collaboration of the top quark using 13 TeV and 8 TeV collision data will be presented: top-quark pair and single top production cross sections including differential distributions will be presented alongside measurements of top-quark properties, including results using boosted top quarks, probe our understanding of top-quark production in the TeV regime. Measurements of the top-quark mass and searches for rare top quark decays are also presented.

  5. Naisjuhtidega ettevõtete TOP 100

    Index Scriptorium Estoniae

    2004-01-01

    Naisjuhtidega ettevõtete TOP 100. Käibe TOP 20. Käibe kasvu TOP 20. Kasumi TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Riigi- ja kohaliku omavalitsuse asutuste naisjuhtide TOP 25. Riigi- ja kohaliku omavalitsuse asutuste eelarve TOP 25. Riigi- ja kohaliku omavalitsuse asutuste töötajate arvu TOP 25. Riigi- ja kohaliku omavalitsuse asutuste naisjuhtide palga TOP 25

  6. Study of top and anti-top mass difference

    CERN Document Server

    Leedumrongwatthanakun, Saroch

    2013-01-01

    The invariance of the standard model under CPT transformations leads to the equality of particle and antiparticle masses. The recent measurements performed by the CMS experiment on the top anti-top mass difference are a test of such symmetry. In this work non-perturbative QCD effects, which may eventually lead to an apparent difference in the mass of a top and anti-top quark, are studied.

  7. Tekstiilitööstuse TOP 47

    Index Scriptorium Estoniae

    2005-01-01

    Tekstiilitööstuse TOP 47; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Varade tootlikkuse TOP 20; Tekstiilitööstuse TOP-i firmade üld- ja finantsandmed

  8. Rõivatööstuse TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Rõivatööstuse TOP 50; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Rõivatööstuse TOP-i firmade üld- ja finantsandmed

  9. Eesti Ettevõtete TOP 100

    Index Scriptorium Estoniae

    2002-01-01

    TOP 100. Käibe TOP 500. Käibe kasvu TOP 100. Kasumi TOP 100. Kasumi kasvu TOP 100. Rentaabluse TOP 100. Omakapitali tootlikkuse TOP 100. Eesti edukamate ettevõtete üldandmed. Eesti edukamate ettevõtete finantsnäitajad. Valdkonna ja maakonna TOP-ide edukamate ettevõtete finantsnäitajad

  10. Treasury Offset Program (TOP) MI

    Data.gov (United States)

    Social Security Administration — The TOP MI helps OPSOS coordinate TOP case processing in the regions. The MI also helped communicate our progress and findings to BFQM and ORDP, as well as the ACOSS.

  11. Top Quark Physics with CMS

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Higgs mechanism. There are various hints at deviations from the Standard Model expectation which have been observed recently by Tevatron experiments in top final states. Several signatures of new physics accessible at the LHC either suffer from top-quark production as a significant background or contain top quarks themselves. In this talk, we present results on top quark physics obtained from the first LHC data collected by the CMS experiment.They include measurements of the top pair production cross section in various channels and their combination, measurements of the top quark mass, the single top cross section, a search for new particles decaying into top pairs, and a first look at the charge asymmetry.

  12. Top production at hadron colliders

    Indian Academy of Sciences (India)

    New results on top quark production are presented from four hadron collider experiments: CDF and D0 at the Tevatron, and ATLAS and CMS at the LHC. Cross-sections for single top and top pair production are discussed, as well as results on the top–antitop production asymmetry and searches for new physics including ...

  13. Single top t-channel

    CERN Document Server

    Faltermann, Nils

    2017-01-01

    The production of single top quarks allows to study the interplay of top quark physics and the electroweak sector of the standard model. Deviations from predictions can be a hint for physics beyond the standard model. The t-channel is the dominant production mode for single top quarks at the LHC. This talk presents the latest measurements from the ATLAS and CMS collaborations.

  14. Forward Top Physics at LHCb

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    The first Run 2 measurement of top pair production in the dilepton channel at 13 TeV will be presented, along with previous Run 1 measurements in final states accessible to both single top and top pair production. Heavy flavour tagging strategies at LHCb will also be discussed.

  15. The top ten.

    Science.gov (United States)

    Davis, C

    1985-10-01

    3 lists were compiled to answer the question of what countries have experienced the most population growth from World War II to the present. The 1st list includes the 10 countries which accounted for the largest gain in world population. The 2nd list shows the 10 countries with the highest growth rates of the 150 or so most populous countries in the world. The last list also shows countries ranked by growth rate but is limited to those with a current population of at least 10 million. To deal with the fact that some countries did not exist at 1 of the reference points, a set of estimates for 1940 provided a convenient starting point. China and India headed the list of countries ranked by absolute gains. They contributed half again as much growth as the next 8 nations combined. Altogether Asia, home to almost 60% of the world's population, captured 5 of the top 10 slots. The US and the USSR are the only developed countries on the list. The Soviet Union also presents the 1st case on the list of a country with a lower ranking in population gain (6th) than in absolute size in 1985 (3rd). Many of the population giants of 1940 (Japan, Great Britain, Germany, France, and Italy) are not on the list. Despite large base populations, their growth has been slow in the intervening years. All of the countries with the highest growth rates experienced over 3% annual average growth during the last 45 years: Kuwait, United Arab Emirates, Libya, Venezuela, Costa Rica, Kenya, Ivory Coast, Mexico, Honduras, and Syria. The influence of immigration is much in evidence in this list and explains otherwise unachievable rates of growth. The top 4 countries in annual rates of growth are all oil exporters. The top 3 countries in the 3rd list -- Venezuela, Kenya, and Mexico -- are carried over from the 2nd list, sharing the characteristics of rapid population growth and substantial base populations. The geographic mix of this list is notable. Asia, Africa, and Latin America each have at least

  16. Top quark physics

    International Nuclear Information System (INIS)

    Menzione, A.

    1995-10-01

    Most of the material presented in this report, comes from contributions to the parallel session PL20 of this conference. We summarise the experimental results of direct production of Top quarks, coming from the CDF and C0 Collaborations at Fermilab, and compare these results to what one expects within current theoretical understanding. Particular attention is given to new results such as all hadronic modes of t bar t decay. As far as the mass is concerned, a comparison is made with precision measurements of related quantities, coming from LEP and other experiments. An attempt is made to look at the medium-term future and understand which variables and with what accuracy one can measure them with increased integrated luminosity

  17. Top quark pair production and top quark properties at CDF

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Chang-Seong [INFN, Pisa

    2016-06-02

    We present the most recent measurements of top quark pairs production and top quark properties in proton-antiproton collisions with center-of-mass energy of 1.96 TeV using CDF II detector at the Tevatron. The combination of top pair production cross section measurements and the direct measurement of top quark width are reported. The test of Standard Model predictions for top quark decaying into $b$-quarks, performed by measuring the ratio $R$ between the top quark branching fraction to $b$-quark and the branching fraction to any type of down quark is shown. The extraction of the CKM matrix element $|V_{tb}|$ from the ratio $R$ is discussed. We also present the latest measurements on the forward-backward asymmetry ($A_{FB}$) in top anti-top quark production. With the full CDF Run II data set, the measurements are performed in top anti-top decaying to final states that contain one or two charged leptons (electrons or muons). In addition, we combine the results of the leptonic forward-backward asymmetry in $t\\bar t$ system between the two final states. All the results show deviations from the next-to-leading order (NLO) standard model (SM) calculation.

  18. Toitlustusettevõtete TOP 30 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Toitlustusettevõtete TOP 30 aastal 2002. Käibe TOP 30. Kasumi TOP 30. Käibe kasvu TOP 30. Kasumi kasvu TOP 30. Rentaabluse TOP 30. Omakapitali tootlikkuse TOP 30. Toitlustusettevõtete üldandmed. Toitlustusettevõtete finantsandmed

  19. Hiiumaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Hiiumaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Hiiumaa ettevõtete üld- ja finantsandmed; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20. Vt samas: Teeli Remmalg: Hiiumaal jätkub plastitööstuse võidumarss

  20. The search for the top quark

    International Nuclear Information System (INIS)

    Barbaro-Galtieri, A.

    1989-03-01

    This paper discusses the following topics: top search in the near future, general remarks, top search at HERA, searching for the top quarks at the Z 0 machines, finding the top at Lep II, top search in UA2, top search in UA1, and top search at CDF. 58 refs., 38 figs

  1. Toiduainetööstuste TOP 100

    Index Scriptorium Estoniae

    2006-01-01

    Toiduainetööstuse TOP. Vt. samas: Käibe TOP 10; Käibekasvu TOP 10; Kasumi TOP 10; Kasumi kasvu TOP 10; Rentaabluse TOP 10; Omakapitali tootlikkuse TOP 10; Toiduainetööstuse üld- ja finantsandmed

  2. Online-kaubanduse TOP aastal 2003

    Index Scriptorium Estoniae

    2004-01-01

    Online-kaubanduse TOP aastal 2003. Käibe TOP 5. Käibe kasvu TOP 5. Rentaabluse TOP 5. Kasumi TOP 5. Kasumi kasvu TOP 5. Omakapitali tootlikkuse TOP 5. Lisa: TOPi koostamise metoodika. Online-kaubanduse firmade üldandmed. Online kaubanduse firmade finantsandmed

  3. TopView - ATLAS top physics analysis package

    CERN Document Server

    Shibata, A

    2007-01-01

    TopView is a common analysis package which is widely used in the ATLAS top physics working group. The package is fully based on the official ATLAS software Athena and EventView and playing a central role in the collaborative analysis model. It is a functional package which accounts for a broad range issues in implementing physics analysis. As well as being a modular framework suitable as a common workplace for collaborators, TopView implements numerous analysis tools including a complete top-antitop reconstruction and single top reconstruction. The package is currently used to produce common ntuple from Monte Carlo production and future use cases are under rapid development. In this paper, the design and ideas behind TopView and the performance of the analyses implemented in the package are presented with detailed documentation of the contents and instruction for using the package.

  4. Effects of Housing Systems and the Diet Supplements on the Slaughter Value and Concentration of Mineral Elements in the Loin Muscle of Lambs

    Directory of Open Access Journals (Sweden)

    M. Gabryszuk

    2014-05-01

    Full Text Available The objective of this study was to investigate the effect of maintenance system as well as the effect of Se, Zn, and vitamin E supplementation of ram-lambs on the slaughter value and concentration of mineral elements in the loin muscle of lambs. The experiment was conducted on 72 Polish Merino ram-lambs divided into three groups: group C, indoor with no supplement, 19 lambs; S, indoor with supplement, 23 lambs; G, outdoor with no supplement, 30 lambs. From birth all the lambs were maintained indoor with their dams and then weaned at the age of 8 weeks. The rams from group C and S were placed in individual straw-bedded pens and fattened individually with concentrate mixture offered ad libitum until the age of 16 weeks. The lambs from group G were grazed every day from May to July (2 months. During the fattening period each lamb from the supplemented group S was administered per os 1 mL 0.1% Na2SeO4 (Se, 0.42 mg, 3 mL 10% ZnSO4 (Zn, 68 mg, and 1 mL premix protect vitamin E (0.1 g α-tocopherol, 5 mg lysine, 5 mg methionine daily. A comparison of half carcasses across the groups has shown no difference between the control group and the one with supplements, while the weight of half carcasses in the grazing group was smaller in comparison with groups C and S (p<0.001. The meat content in the pelvic limb showed no differences across all groups under study. The pelvic limb of grazing lambs contained less fat compared to the control and supplemented groups (p<0.001. The concentrations of Se and Zn in the blood plasma of ram-lambs from the supplemented group were significantly higher than for the control and grazing lambs. Inorganic Se and Zn supplementation with vitamin E to the diet of lambs increased Se and Zn levels in loin muscle (p<0.001 to 0.46 μg/g and 32.9 μg/g in fresh tissue, respectively.

  5. Naisjuhtidega ettevõtete TOP 70

    Index Scriptorium Estoniae

    2003-01-01

    Naisjuhtidega ettevõtete TOP 70. Käibe TOP 30. Käibe kasvu TOP 30. Kasumi TOP 30. Kasumi kasvu TOP 30. Rentaabluse TOP 30. Omakapitali tootlikkuse TOP 30. Nais- ja meesjuhtidega ettevõtted 2001. aasta 500 edukama ettevõtte hulgas. Naistegevjuhtidega firmade TOP 2001 ja 2002. Riigi- ja kohaliku omavalitsuse asutuste naisjuhtide TOP 20. Riigi- ja kohaliku omavalitsuse asutuste eelarve TOP 20. Riigi- ja kohaliku omavalitsuse asutuste töötajate arvu TOP 20. Naistegevjuhtidega firmade osakaal 2001. aastal. Riigi- ja kohaliku omavalitsuse asutuste naisjuhtide aastapalga TOP 20. Kommenteerib Tiina Raitviir.

  6. Financial top 100

    International Nuclear Information System (INIS)

    Jaremko, G.

    1999-01-01

    The way in which the oil industry has rebounded from a difficult financial year was discussed. In 1998, oil prices fell by about 30 per cent from 1997 prices to average US$14.40. In the second quarter of 1999, the rebounding international markets raised oil prices by about one-third to an average US$17.60. Recent surveys have shown that the oil and gas industry will experience major changes in the decade ahead. It was forecasted that in 25 years, total Canadian oil production could near three million barrels per day, an increase of 36 per cent from today's 2.2 million. However, as conventional reserves are running out, production of conventional oil is expected to be diminished by about two-thirds. Naturally-occurring, light refinery-ready oil is forecasted to come mostly from the east coast, whereas western output will be dominated by oil sands. Natural gas will continue to be a huge growth opportunity in the west because of new pipeline expansions and exports to the United States. This paper presented a list of Canada's financial top 100 oil and gas companies which emerged with the best endurance. The list included statistics from 1997 and 1998 for gross revenues, total assets, net income, cash/operating activities, capital expenditures, closing share prices (with percentage change), and market capitalization. 1 fig., 1 tab

  7. Our top priority

    CERN Multimedia

    2012-01-01

    After three years of LHC running, we are still at the beginning of a long research programme with our flagship facility, and hopefully 4 July 2012 will go down in history as the date of one of many landmark discoveries spanning several years. CERN’s top priority for the next decade and more is the full exploitation of the LHC. With speculation about potential future facilities mounting in the light of the discovery of a new Higgs-like particle, it’s important to state that most clearly. Of course, this will rely on continued global collaboration, and it’s important that CERN engage constructively with other regions.   It is important to plan ahead, particularly since the lead times for new projects in particle physics are long, and our field is increasingly global in nature. That’s why the European particle physics community is currently engaged in updating its long-term strategy. Planning ahead allowed us to be ready technologically to build the LHC whe...

  8. Participative Design With Top Management

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    2004-01-01

    meetings aimed at aligning top management with the supplier’s analysis. The article describes the MUST method’s anchoring principle and the technique of problem mapping supporting this principle. This participatory approach resulted in mutual learning processes with top management which is rarely reported...... on in the PD community. Top management participated by reviewing, challenging, and reformulating the IT designers’ central suppositions, assumptions, and hypotheses related to the causal relation between identified problems and suggested solutions....

  9. Boosted top: experimental tools overview

    CERN Document Server

    Usai, Emanuele

    2015-01-01

    An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

  10. Could stops lighten the top?

    International Nuclear Information System (INIS)

    Bilal, A.; Ellis, J.; Fogli, G.L.

    1990-01-01

    The analysis of the presently available electroweak data including radiative corrections in the standard model suggests that the top quark weighs more than the Z 0 . We examine whether squark loops in the minimal supersymmetric model, particularly those involving stops (partners of the top quark), could reduce substantially the preferred range of top quark masses. Given the present lower bounds on squark masses, we find that stop effects can reduce the central value of m t by at most a few GeV, although they do make a very heavy top quark increasingly unlikely. (orig.)

  11. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors.

    Science.gov (United States)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia; Henle, Thomas; Antequera, Teresa; Ruiz-Carrascal, Jorge

    2015-02-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied. FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more markedly than in roasted ones. FES added meat showed higher contents of furosine; 1,2-dicarbonyl compounds and 5-hydroxymethylfurfural did not reach detectable levels. N-ε-carboxymethyllysine amounts were rather low and not influenced by the studied factors. Cooked meat seems to be a minor dietary source of MR products, regardless the presence of reducing sugars and the cooking method. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. The effects of atmospheric pressure cold plasma treatment on microbiological, physical-chemical and sensory characteristics of vacuum packaged beef loin.

    Science.gov (United States)

    Bauer, A; Ni, Y; Bauer, S; Paulsen, P; Modic, M; Walsh, J L; Smulders, F J M

    2017-06-01

    Effects on vacuum packaged and non-packaged beef longissimus samples exposed to atmospheric cold plasma (ACP) generated at different powers were studied over a 10day period of vacuum-, and a subsequent 3day period of aerobic storage. Exposure of non-covered beef samples under high power ACP conditions resulted in increased a*, b*, Chroma and Hue values, but ACP treatment of packaged loins did not impact colour (L*, a*, b*, Chroma, Hue), lipid peroxidation, sarcoplasmic protein denaturation, nitrate/nitrite uptake, or myoglobin isoform distribution. Colour values measured after 3days of aerobic storage following unpackaging (i.e. 20days post-mortem) were similar and all compliant with consumer acceptability standards. Exposure to ACP of the polyamide-polyethylene packaging film inoculated with Staphylococcus aureus, Listeria monocytogenes and two Escherichia coli strains resulted in >2 log reduction without affecting the integrity of the packaging matrix. Results indicate that ACP can reduce microbial numbers on surfaces of beef packages without affecting characteristics of the packaged beef. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Wave Engine Topping Cycle Assessment

    Science.gov (United States)

    Welch, Gerard E.

    1996-01-01

    The performance benefits derived by topping a gas turbine engine with a wave engine are assessed. The wave engine is a wave rotor that produces shaft power by exploiting gas dynamic energy exchange and flow turning. The wave engine is added to the baseline turboshaft engine while keeping high-pressure-turbine inlet conditions, compressor pressure ratio, engine mass flow rate, and cooling flow fractions fixed. Related work has focused on topping with pressure-exchangers (i.e., wave rotors that provide pressure gain with zero net shaft power output); however, more energy can be added to a wave-engine-topped cycle leading to greater engine specific-power-enhancement The energy addition occurs at a lower pressure in the wave-engine-topped cycle; thus the specific-fuel-consumption-enhancement effected by ideal wave engine topping is slightly lower than that effected by ideal pressure-exchanger topping. At a component level, however, flow turning affords the wave engine a degree-of-freedom relative to the pressure-exchanger that enables a more efficient match with the baseline engine. In some cases, therefore, the SFC-enhancement by wave engine topping is greater than that by pressure-exchanger topping. An ideal wave-rotor-characteristic is used to identify key wave engine design parameters and to contrast the wave engine and pressure-exchanger topping approaches. An aerodynamic design procedure is described in which wave engine design-point performance levels are computed using a one-dimensional wave rotor model. Wave engines using various wave cycles are considered including two-port cycles with on-rotor combustion (valved-combustors) and reverse-flow and through-flow four-port cycles with heat addition in conventional burners. A through-flow wave cycle design with symmetric blading is used to assess engine performance benefits. The wave-engine-topped turboshaft engine produces 16% more power than does a pressure-exchanger-topped engine under the specified topping

  14. Status of the top quark: Top production cross section and top properties

    Energy Technology Data Exchange (ETDEWEB)

    Boisvert, V.; /Rochester U.

    2006-08-01

    This report describes the latest cross section and property measurements associated with the top quark at the Tevatron Run II. The largest data sample used is 760 pb{sup -1} of integrated luminosity. Due to its large mass, the top quark might be involved in the process of electroweak symmetry breaking, making it a useful probe for signs of new physics.

  15. New directions in top physics

    Energy Technology Data Exchange (ETDEWEB)

    Schell, Torben Karl

    2017-02-01

    The top quark plays an important role for many aspects of particle physics. The coupling of the Higgs boson to top quarks is a key parameter to probe electroweak symmetry breaking and is important for the evolution of the Higgs potential to high energies. In addition, many models of physics beyond the Standard Model predict heavy particles that decay to top-quark pairs. Furthermore, the unexplained hierarchy of fermion masses culminates in the large top-quark mass. In this thesis, we consider resonance searches based on top quarks in the fully hadronic final state. We employ multivariate techniques in form of boosted decision trees and add several improvements to the original HEPTopTagger algorithm. These modifications and extensions result in the new HEPTopTagger2. The achieved improvements are used to estimate the precision to which the top Yukawa coupling can be measured at a future 100 TeV proton-proton collider in the fully hadronic final state of t anti tH production. We find that at such a collider a precision measurement of the top Yukawa coupling to 1% should be possible. The statistical precision is backed up by demonstrating that in the ratio σ(t anti tH)/σ(t anti tZ) theoretical uncertainties cancel to below-percent level. Finally, we propose a Froggatt-Nielsen-type model to address the hierarchy of fermion masses in the Standard Model and determine current and projected bounds on the available parameter space.

  16. Genome Wide Association Studies (GWAS Identify QTL on SSC2 and SSC17 Affecting Loin Peak Shear Force in Crossbred Commercial Pigs.

    Directory of Open Access Journals (Sweden)

    Chunyan Zhang

    Full Text Available Of all the meat quality traits, tenderness is considered the most important with regard to eating quality and market value. In this study we have utilised genome wide association studies (GWAS for peak shear force (PSF of loin muscle as a measure of tenderness for 1,976 crossbred commercial pigs, genotyped for 42,721 informative SNPs using the Illumina PorcineSNP60 Beadchip. Four 1 Mb genomic regions, three on SSC2 (at 4 Mb, 5 Mb and 109 Mb and one on SSC17 (at 20 Mb, were detected which collectively explained about 15.30% and 3.07% of the total genetic and phenotypic variance for PSF respectively. Markers ASGA0008566, ASGA0008695, DRGA0003285 and ASGA0075615 in the four regions were strongly associated with the effects. Analysis of the reference genome sequence in the region with the most important SNPs for SSC2_5 identified FRMD8, SLC25A45 and LTBP3 as potential candidate genes for meat tenderness on the basis of functional annotation of these genes. The region SSC2_109 was close to a previously reported candidate gene CAST; however, the very weak LD between DRGA0003285 (the best marker representing region SSC2_109 and CAST indicated the potential for additional genes which are distinct from, or interact with, CAST to affect meat tenderness. Limited information of known genes in regions SSC2_109 and SSC17_20 restricts further analysis. Re-sequencing of these regions for informative animals may help to resolve the molecular architecture and identify new candidate genes and causative mutations affecting this trait. These findings contribute significantly to our knowledge of the genomic regions affecting pork shear force and will potentially lead to new insights into the molecular mechanisms regulating meat tenderness.

  17. Top quark properties at ATLAS

    CERN Document Server

    Dilip, Jana

    2008-01-01

    The ATLAS potential for the study of the top quark properties and physics beyond the Standard Model in the top quark sector, is described. The measurements of the top quark charge, the spin and spin correlations, the Standard Model decay (t-> bW), rare top quark decays associated to flavour changing neutral currents (t-> qX with X = gluon, Z, photon) and ttbar resonances are discussed. The sensitivity of the ATLAS experiment is estimated for an expected luminosity of 1fb-1 at the LHC. The full simulation of the ATLAS detector is used. For the Standard Model measurements the expected precision is presented. For the tests of physics beyond the Standard Model, the 5 sigma discovery potential (in the presence of a signal) and the 95% Confidence Level (CL) limit (in the absence of a signal) are given.

  18. Võrumaa ettevõtete TOP 50 aastal 2003

    Index Scriptorium Estoniae

    2004-01-01

    Võrumaa ettevõtete TOP 50 aastal 2003. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Võrumaa firmade üld- ja finantsandmed

  19. Uncovering the single top: observation of electroweak top quark production

    Energy Technology Data Exchange (ETDEWEB)

    Benitez, Jorge Armando [Michigan State Univ., East Lansing, MI (United States)

    2009-01-01

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as 'Single Top'. Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element Vtb, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb-1 of Data collected with the D0 detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: (1) σ(p$\\bar{p}$→ tb + X, tqb + X) = 3.74-0.74+0.95 pb, where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10-6. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: (2) σ(p$\\bar{p}$ → tb + X, tqb + X) = 3.94 ± 0.88 pb, and the corresponding measurement significance is 5.0 standard deviations.

  20. Search for Top in TOTEM

    CERN Document Server

    Corrales, Alonso

    2017-01-01

    The work assigned to me during this summer (from June 19th to August 11th) was in the "Search for Top in TOTEM" project, a CMG project in collaboration with TOTEM, under the supervision of Martijn Mulders and Laurent Forthomme. The goal is to determine physical properties of the top anti top quark pair (tt) created by central exclusive processes, particularly the invariant mass. For that it is necessary to relate the measurements of the reconstructed top pair kinematics in the central detector of CMS with the detected protons in the Roman Pots of TOTEM just outside the interaction site, about 200 m from it. CMS only considers decay products from the proton collision, it does not regard the forward protons that participated in the collision. On the contrary, TOTEM does consider these protons. In this research measurements of both TOTEM and CMS were combined Figure 1 shows a diagram of the production of the top anti top pair from the interaction of the two protons. A central exclusive process occurs when the pr...

  1. The theory of the top

    CERN Document Server

    Klein, Felix; Nagem, Raymond J; Sandri, Guido

    The Theory of the Top. Volume IV. Technical Applications of the Theory of the Top is the fourth and final volume in a series of self-contained English translations of the classic and definitive treatment of rigid body motion. Key features: * Complete and unabridged presentation with recent advances and additional notes; * Annotations by the translators provide insights into the nature of science and mathematics in the late 19th century; * Each volume interweaves theory and applications. The Theory of the Top was originally presented by Felix Klein as an 1895 lecture at Göttingen University that was broadened in scope and clarified as a result of collaboration with Arnold Sommerfeld.  Graduate students and researchers interested in theoretical and applied mechanics will find this series of books a thorough and insightful account.  Other volumes in the series include Introduction to the Kinematics and Kinetics of the Top, Development of the Theory in the Case of the Heavy Symmetric Top, and Perturbation...

  2. Kinematic top analyses at CDF

    Energy Technology Data Exchange (ETDEWEB)

    Grassmann, H.; CDF Collaboration

    1995-03-01

    We present an update of the top quark analysis using kinematic techniques in p{bar p} collisions at {radical}s = 1.8 TeV with the Collider Detector at Fermilab (CDF). We reported before on a study which used 19.3 pb{sup {minus}1} of data from the 1992--1993 collider run, but now we use a larger data sample of 67 pb{sup {minus}1}. First, we analyze the total transverse energy of the hard collision in W+{ge}3 jet events, showing the likely presence of a t{bar t} component in the event sample. Next, we compare in more detail the kinematic structure of W+ {ge}3 jet events with expectations for top pair production and with background processes, predominantly direct W+ jet production. We again find W+ {ge} 3 jet events which cannot be explained in terms of background, but show kinematic features as expected from top. These events also show evidence for beauty quarks, in agreement with expectations from top, but not compatible with expectations from backgrounds. The findings confirm the observation of top events made earlier in the data of the 1992--1993 collider run.

  3. WordPress Top Plugins

    CERN Document Server

    Corbin, Brandon

    2010-01-01

    Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

  4. Climbing back to the top

    Energy Technology Data Exchange (ETDEWEB)

    Curry, Lynn

    2010-07-01

    California - the top wind producer in the US since the 1980s lost its lead in 2008 in the face of intense competition from other states. But backed by strong financial and political support from the government, California's wind energy sector is slowly making a comeback. (orig.)

  5. Kowalevski top in quantum mechanics

    International Nuclear Information System (INIS)

    Matsuyama, A.

    2013-01-01

    The quantum mechanical Kowalevski top is studied by the direct diagonalization of the Hamiltonian. The spectra show different behaviors depending on the region divided by the bifurcation sets of the classical invariant tori. Some of these spectra are nearly degenerate due to the multiplicity of the invariant tori. The Kowalevski top has several symmetries and symmetry quantum numbers can be assigned to the eigenstates. We have also carried out the semiclassical quantization of the Kowalevski top by the EBK formulation. It is found that the semiclassical spectra are close to the exact values, thus the eigenstates can be also labeled by the integer quantum numbers. The symmetries of the system are shown to have close relations with the semiclassical quantum numbers and the near-degeneracy of the spectra. -- Highlights: •Quantum spectra of the Kowalevski top are calculated. •Semiclassical quantization is carried out by the EBK formulation. •Quantum states are labeled by the semiclassical integer quantum numbers. •Multiplicity of the classical torus makes the spectra nearly degenerate. •Symmetries, quantum numbers and near-degenerate spectra are closely related

  6. Top production at hadron colliders

    Indian Academy of Sciences (India)

    mulated by the summer of 2010, the first top quark event candidates were observed and ..... Result of combined fit to data in the exclusive three-jet bin, the exclusive .... Figure 7 shows the results of a model-independent measurement of.

  7. TEMAC, Top Event Sensitivity Analysis

    International Nuclear Information System (INIS)

    Iman, R.L.; Shortencarier, M.J.

    1988-01-01

    1 - Description of program or function: TEMAC is designed to permit the user to easily estimate risk and to perform sensitivity and uncertainty analyses with a Boolean expression such as produced by the SETS computer program. SETS produces a mathematical representation of a fault tree used to model system unavailability. In the terminology of the TEMAC program, such a mathematical representation is referred to as a top event. The analysis of risk involves the estimation of the magnitude of risk, the sensitivity of risk estimates to base event probabilities and initiating event frequencies, and the quantification of the uncertainty in the risk estimates. 2 - Method of solution: Sensitivity and uncertainty analyses associated with top events involve mathematical operations on the corresponding Boolean expression for the top event, as well as repeated evaluations of the top event in a Monte Carlo fashion. TEMAC employs a general matrix approach which provides a convenient general form for Boolean expressions, is computationally efficient, and allows large problems to be analyzed. 3 - Restrictions on the complexity of the problem - Maxima of: 4000 cut sets, 500 events, 500 values in a Monte Carlo sample, 16 characters in an event name. These restrictions are implemented through the FORTRAN 77 PARAMATER statement

  8. Top mass measurement at CDF

    International Nuclear Information System (INIS)

    Rolli, S.

    1996-06-01

    We present the measurement of the top quark mass using L = 110 pb -1 data sample of pp collisions at √s = 1.8 TeV collected with the Collider Detector at Fermilab (CDF). We show the results for the different channels and discuss with some emphasis the determination of the systematic uncertainties. 7 refs., 10 figs., 5 tabs

  9. Observation of the Top Quark

    Science.gov (United States)

    Kim, S. B.

    1995-08-01

    Top quark production is observed in{bar p}p collisions at{radical}s= 1.8 TeV at the Fermilab Tevatron. The Collider Detector at Fermilab (CDF) and D{O} observe signals consistent with t{bar t} to WWb{bar b}, but inconsistent with the background prediction by 4.8{sigma} (CDF), 4.6a (D{O}). Additional evidence for the top quark Is provided by a peak in the reconstructed mass distribution. The kinematic properties of the excess events are consistent with the top quark decay. They measure the top quark mass to be 176{plus_minus}8(stat.){plus_minus}10(sys.) GeV/c{sup 2} (CDF), 199{sub -21}{sup+19}(stat.){plus_minus}22(sys.) GeV/c{sup 2} (D{O}), and the t{bar t} production cross section to be 6.8{sub -2.4}{sup+3.6}pb (CDF), 6.4{plus_minus}2.2 pb (D{O}).

  10. Tree compression with top trees

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li; Landau, Gad M.

    2013-01-01

    We introduce a new compression scheme for labeled trees based on top trees [3]. Our compression scheme is the first to simultaneously take advantage of internal repeats in the tree (as opposed to the classical DAG compression that only exploits rooted subtree repeats) while also supporting fast...

  11. Tree compression with top trees

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li; Landau, Gad M.

    2015-01-01

    We introduce a new compression scheme for labeled trees based on top trees. Our compression scheme is the first to simultaneously take advantage of internal repeats in the tree (as opposed to the classical DAG compression that only exploits rooted subtree repeats) while also supporting fast...

  12. Top Jets at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, L.G.; Lee, S.J.; Perez, G.; Sung, I.; Virzi, J.

    2008-10-06

    We investigatethe reconstruction of high pT hadronically-decaying top quarksat the Large Hadron Collider. One of the main challenges in identifying energetictop quarks is that the decay products become increasingly collimated. This reducesthe efficacy of conventional reconstruction methods that exploit the topology of thetop quark decay chain. We focus on the cases where the decay products of the topquark are reconstructed as a single jet, a"top-jet." The most basic"top-tag" methodbased on jet mass measurement is considered in detail. To analyze the feasibility ofthe top-tagging method, both theoretical and experimental aspects of the large QCDjet background contribution are examined. Based on a factorization approach, wederive a simple analytic approximation for the shape of the QCD jet mass spectrum.We observe very good agreement with the Monte Carlo simulation. We consider high pT tt bar production in the Standard Model as an example, and show that our theoretical QCD jet mass distributions can efficiently characterize the background via sideband analyses. We show that with 25 fb-1 of data, our approach allows us to resolve top-jets with pT _> 1 TeV, from the QCD background, and about 1.5 TeV top-jets with 100 fb-1, without relying on b-tagging. To further improve the significancewe consider jet shapes (recently analyzed in 0807.0234 [hep-ph]), which resolve thesubstructure of energy flow inside cone jets. A method of measuring the top quarkpolarization by using the transverse momentum of the bottom quark is also presented.The main advantages of our approach are: (i) the mass distributions are driven byfirst principle calculations, instead of relying solely on Monte Carlo simulation; (ii) for high pT jets (pT _> 1 TeV), IR-safe jet shape variables are robust against detectorresolution effects. Our analysis can be applied to other boosted massive particlessuch as the electroweak gauge bosons and the Higgs.

  13. Travailler loin de son domicile

    OpenAIRE

    Bonnet, Estelle; Verley, Elise; Ries, Tammy

    2017-01-01

    Résumé : La mobilité géographique liée à un lieu de travail éloigné du domicile – supposant soit de longs trajets quotidiens, soit de dormir en dehors du domicile – s’inscrit à l’articulation de la sphère professionnelle et de la sphère privée. Elle met à l’épreuve le couple et la distribution des rôles sexués en son sein. Cet article interroge les divisions sexuées inhérentes à cette articulation selon que l’on se place du point de vue d’une mobilité féminine ou masculine. Il examine en quoi...

  14. Measurements of Top Properties at the Tevatron

    International Nuclear Information System (INIS)

    Husemann, Ulrich; Yale U.

    2007-01-01

    The large data samples of thousands of top events collected at the Tevatron experiments CDF and D(O) allow for a variety of measurements to analyze the properties of the top quark. Guided by the question ''Is the top quark observed at the Tevatron really the top quark of the standard model,'' we present Tevatron analyses studying the top production mechanism including resonant t(bar t) production, the V -A structure of the t → Wb decay vertex, the charge of the top quark, and single-top production via flavor-changing neutral currents

  15. Properties of the Top Quark

    Energy Technology Data Exchange (ETDEWEB)

    Wicke, Daniel; /Wuppertal U., Dept. Math.

    2009-08-01

    The aim of particle physics is the understanding of elementary particles and their interactions. The current theory of elementary particle physics, the Standard Model, contains twelve different types of fermions which (neglecting gravity) interact through the gauge bosons of three forces. In addition a scalar particle, the Higgs boson, is needed for theoretical consistency. These few building blocks explain all experimental results found in the context of particle physics, so far. Nevertheless, it is believed that the Standard Model is only an approximation to a more complete theory. First of all the fourth known force, gravity, has withstood all attempts to be included until now. Furthermore, the Standard Model describes several features of the elementary particles like the existence of three families of fermions or the quantisation of charges, but does not explain these properties from underlying principles. Finally, the lightness of the Higgs boson needed to explain the symmetry breaking is difficult to maintain in the presence of expected corrections from gravity at high scales. This is the so called hierarchy problem. In addition astrophysical results indicate that the universe consists only to a very small fraction of matter described by the Standard Model. Large fractions of dark energy and dark matter are needed to describe the observations. Both do not have any correspondence in the Standard Model. Also the very small asymmetry between matter and anti-matter that results in the observed universe built of matter (and not of anti-matter) cannot be explained until now. It is thus an important task of experimental particle physics to test the predictions of the Standard Model to the best possible accuracy and to search for deviations pointing to necessary extensions or modifications of our current theoretical understanding. The top quark was predicted to exist by the Standard Model as the partner of the bottom quark. It was first observed in 1995 by the

  16. Properties of the Top Quark

    International Nuclear Information System (INIS)

    Wicke, Daniel

    2009-01-01

    The aim of particle physics is the understanding of elementary particles and their interactions. The current theory of elementary particle physics, the Standard Model, contains twelve different types of fermions which (neglecting gravity) interact through the gauge bosons of three forces. In addition a scalar particle, the Higgs boson, is needed for theoretical consistency. These few building blocks explain all experimental results found in the context of particle physics, so far. Nevertheless, it is believed that the Standard Model is only an approximation to a more complete theory. First of all the fourth known force, gravity, has withstood all attempts to be included until now. Furthermore, the Standard Model describes several features of the elementary particles like the existence of three families of fermions or the quantisation of charges, but does not explain these properties from underlying principles. Finally, the lightness of the Higgs boson needed to explain the symmetry breaking is difficult to maintain in the presence of expected corrections from gravity at high scales. This is the so called hierarchy problem. In addition astrophysical results indicate that the universe consists only to a very small fraction of matter described by the Standard Model. Large fractions of dark energy and dark matter are needed to describe the observations. Both do not have any correspondence in the Standard Model. Also the very small asymmetry between matter and anti-matter that results in the observed universe built of matter (and not of anti-matter) cannot be explained until now. It is thus an important task of experimental particle physics to test the predictions of the Standard Model to the best possible accuracy and to search for deviations pointing to necessary extensions or modifications of our current theoretical understanding. The top quark was predicted to exist by the Standard Model as the partner of the bottom quark. It was first observed in 1995 by the

  17. Toiduainetööstuse TOP 95 aastal 2003

    Index Scriptorium Estoniae

    2004-01-01

    Toiduainetööstuse TOP 95; Kasumi TOP 40; Käibe TOP 40; Kasumi kasvu TOP 30; Rentaabluse TOP 30; Alkoholitootjate TOP; Pagarite TOP; Käibe kasvu TOP 30; Omakapitali tootlikkuse TOP 30; Toiduainetööstuste üld- ja finantsandmed

  18. Top quark production at the Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Varnes, Erich W.; /Arizona U.

    2010-09-01

    The Fermilab Tevatron has, until recently, been the only accelerator with sufficient energy to produce top quarks. The CDF and D0 experiments have collected large samples of top quarks. We report on recent top quark production measurements of the single top and t{bar t} production cross sections, as well as studies of the t{bar t} invariant mass distribution and a search for highly boosted top quarks.

  19. Thermal design of top shield

    International Nuclear Information System (INIS)

    Raghupathy, S.; Velusamy, K.; Parthasarathy, U.; Ghosh, D.; Selvaraj, P.; Chellapandi, P.; Chetal, S.C.

    2005-01-01

    Full text of publication follows: Prototype Fast Breeder Reactor (PFBR) is a 500 MWe, sodium cooled, pool type fast reactor. The top shield forms the top cover for the main vessel (MV) and includes roof slab (RS), large rotatable plug (LRP), small rotatable plug (SRP) and control Plug (CP). RS, LRP and SRP are box type structures consisting of top and bottom plates stiffened by radial stiffeners and vertical penetration shells. TS is exposed to argon cover gas provided above sodium pool on the bottom side and reactor containment building air at the top. Heat transfer takes place through the argon cover gas to the bottom plate of TS. Annular gaps are formed between the components supported on TS and the component penetrations through which cellular convection takes place. A single thermal shield provided below TS reduces the heat flux to the bottom plate to 1.15 kW/m 2 . The MV (SS 316 LN) is welded to RS (carbon steel A48 P2) through a dissimilar metal weld. A step in RS and an anti convection barrier (ACB) outside RS are provided to limit the temperature at the MV-RS junction. The MV is surrounded by safety vessel (SV) and reactor vault made of concrete. Thermal insulation is provided outside SV to limit the heat transfer to the reactor vault. The design requirements of TS are to maintain the operating temperature at 383-393 K, limit the temperature difference (ΔT) across the height of TS to 20 / 100 K under normal operation/loss of cooling, provide minimum annular gap size at the component penetrations, provide a nearly linear temperature gradient in the CP portion within the height of TS, maintain the temperature of top plate of CP > 383 K, limit the ΔT across the top plate of CP to 2 K, limit the temperature near the inflatable / backup seal to 393 K, limit the temperature at the MV-RS junction and the heat flux to the reactor vault. The total heat transferred to TS is estimated to be 210 kW. A dedicated closed loop cooling system with a total flow rate of 10

  20. Top quark studies at hadron colliders

    Energy Technology Data Exchange (ETDEWEB)

    Sinervo, P.K. [Univ. of Toronto, Ontario (Canada)

    1997-01-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag b quark jets in candidate events. The most recent measurements of top quark properties by the CDF and DO Collaborations are reviewed, including the top quark cross section, mass, branching fractions, and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented.

  1. Top quark studies at hadron colliders

    International Nuclear Information System (INIS)

    Sinervo, P.K.

    1997-01-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag b quark jets in candidate events. The most recent measurements of top quark properties by the CDF and DO Collaborations are reviewed, including the top quark cross section, mass, branching fractions, and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented

  2. Top quark studies at hadron colliders

    International Nuclear Information System (INIS)

    Sinervo, P.K.

    1996-08-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag b quark jets in candidate events. The most recent measurements of top quark properties by the CDF and D null collaborations are reviewed, including the top quark cross section, mass, branching fractions and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented

  3. Toiduainetööstuse TOP 95 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Toiduainetööstuse TOP 95. Käibe TOP 50. Kasumi TOP 50. Rentaabluse TOP 25. Kasumi kasvu TOP 25. Omakapitali tootlikkuse TOP 25. Käibe kasvu TOP 25. Toiduainetööstuse TOP 95 ettevõtted 2002: üldandmed ja finantsandmed

  4. Ida-Virumaa ettevõtete TOP aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Ettevõtete TOP 55. TOP-i esikümme. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Ida-Virumaa firmade üldandmed. Ida-Virumaa firmade finantsandmed

  5. Table-top job analysis

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  6. Top-down cellular pyramids

    Energy Technology Data Exchange (ETDEWEB)

    Wu, A Y; Rosenfeld, A

    1983-10-01

    A cellular pyramid is an exponentially tapering stack of arrays of processors (cells), where each cell is connected to its neighbors (siblings) on its own level, to a parent on the level above, and to its children on the level below. It is shown that in some situations, if information flows top-down only, from fathers to sons, then a cellular pyramid may be no faster than a one-level cellular array; but it may be possible to use simpler cells in the pyramid case. 23 references.

  7. Top quark production at the LHC

    CERN Document Server

    Gilles, Geoffrey; The ATLAS collaboration

    2018-01-01

    The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, it gives us the unique opportunity to probe the properties of bare quarks at the Large Hadron Collider. This talk will present highlights of a few recent precision measurements of the top quark using 13 TeV and 8 TeV collision data: top-quark pair and single top production cross sections, including differential distributions and production in association with bosons, will be presented alongside top quark properties measurements. These measurements, including results using boosted top quarks, probe our understanding of top quark production in the TeV regime. Measurements of the top quark mass are also presented.

  8. Results on top-quark physics and top-quark-like signatures by CMS

    Science.gov (United States)

    Chabert, Eric; CMS Collaboration

    2017-07-01

    This report reviews the results obtained by the CMS Collaboration on top quark physics, focusing on the latest ones based on p-p collisions provided by the LHC at \\sqrt{s}=13{{TeV}} during Run II. It covers measurements of single-top, top quark pairs and associated productions as well as measurements of top quark properties. Finally several beyond the standard model searches involving top quark in the final states are presented, such as searches for supersymmetry in the third generation, heavy resonances decaying into a top quark pair, or dark matter produced in association to a single-top or a top quark pair.

  9. Foodservice yield and fabrication times for beef as influenced by purchasing options and merchandising styles.

    Science.gov (United States)

    Weatherly, B H; Griffin, D B; Johnson, H K; Walter, J P; De La Zerda, M J; Tipton, N C; Savell, J W

    2001-12-01

    Selected beef subprimals were obtained from fabrication lines of three foodservice purveyors to assist in the development of a software support program for the beef foodservice industry. Subprimals were fabricated into bone-in or boneless foodservice ready-to-cook portion-sized cuts and associated components by professional meat cutters. Each subprimal was cut to generate mean foodservice cutting yields and labor requirements, which were calculated from observed weights (kilograms) and processing times (seconds). Once fabrication was completed, data were analyzed to determine means and standard errors of percentage yields and processing times for each subprimal. Subprimals cut to only one end point were evaluated for mean foodservice yields and processing times, but no comparisons were made within subprimal. However, those traditionally cut into various end points were additionally compared by cutting style. Subprimals cut by a single cutting style included rib, roast-ready; ribeye roll, lip-on, bone-in; brisket, deckle-off, boneless; top (inside) round; and bottom sirloin butt, flap, boneless. Subprimals cut into multiple end points or styles included ribeye, lip-on; top sirloin, cap; tenderloin butt, defatted; shortloin, short-cut; strip loin, boneless; top sirloin butt, boneless; and tenderloin, full, side muscle on, defatted. Mean yields of portion cuts, and mean fabrication times required to manufacture these cuts differed (P < 0.05) by cutting specification of the final product. In general, as the target portion size of fabricated steaks decreased, the mean number of steaks derived from any given subprimal cut increased, causing total foodservice yield to decrease and total processing time to increase. Therefore, an inverse relationship tended to exist between processing times and foodservice yields. With a method of accurately evaluating various beef purchase options, such as traditional commodity subprimals, closely trimmed subprimals, and pre-cut portion

  10. Top mass in ATLAS and CMS

    CERN Document Server

    Castro, A.

    2017-01-01

    Top quarks are produced copiously at the LHC, and a variety of related measurements has been made in the recent years by the two collaborations ATLAS and CMS. The most recent measurements of the top quark mass by the two collaborations are reported here. The top quark mass has been measured with a relative uncertainty smaller than 0.3pct, making the top quark the most accurately measured quark.

  11. New Physics in Single-Top Production

    CERN Document Server

    Kind, OM; The ATLAS collaboration

    2013-01-01

    In this presentation for TOP 2013 the latest results on searches of physics beyond the Standard Model using single-top signatures from CDF, CMS, D0 and ATLAS are collected. This includes searches for unknown resonances like W' or b*, measurements of the W helicity fractions and top polarisation in single-top events, as well as tests for CP violation, FCNC or anomalous weak couplings.

  12. MHD Integrated Topping Cycle Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  13. Search for Single Top Production at LEP

    CERN Document Server

    Achard, P; Aguilar-Benítez, M; Alcaraz, J; Alemanni, G; Allaby, James V; Aloisio, A; Alviggi, M G; Anderhub, H; Andreev, V P; Anselmo, F; Arefev, A; Azemoon, T; Aziz, T; Bagnaia, P; Bajo, A; Baksay, G; Baksay, L; Baldew, S V; Banerjee, S; Banerjee, Sw; Barczyk, A; Barillère, R; Bartalini, P; Basile, M; Batalova, N; Battiston, R; Bay, A; Becattini, F; Becker, U; Behner, F; Bellucci, L; Berbeco, R; Berdugo, J; Berges, P; Bertucci, B; Betev, B L; Biasini, M; Biglietti, M; Biland, A; Blaising, J J; Blyth, S C; Bobbink, Gerjan J; Böhm, A; Boldizsar, L; Borgia, B; Bottai, S; Bourilkov, D; Bourquin, Maurice; Braccini, S; Branson, J G; Brochu, F; Burger, J D; Burger, W J; Cai, X D; Capell, M; Cara Romeo, G; Carlino, G; Cartacci, A M; Casaus, J; Cavallari, F; Cavallo, N; Cecchi, C; Cerrada, M; Chamizo-Llatas, M; Chang, Y H; Chemarin, M; Chen, A; Chen, G; Chen, G M; Chen, H F; Chen, H S; Chiefari, G; Cifarelli, Luisa; Cindolo, F; Clare, I; Clare, R; Coignet, G; Colino, N; Costantini, S; de la Cruz, B; Cucciarelli, S; van Dalen, J A; De Asmundis, R; Déglon, P L; Debreczeni, J; Degré, A; Dehmelt, K; Deiters, K; Della Volpe, D; Delmeire, E; Denes, P; De Notaristefani, F; De Salvo, A; Diemoz, M; Dierckxsens, M; Dionisi, C; Dittmar, M; Doria, A; Dova, M T; Duchesneau, D; Echenard, B; Eline, A; El-Mamouni, H; Engler, A; Eppling, F J; Ewers, A; Extermann, P; Falagán, M A; Falciano, S; Favara, A; Fay, J; Fedin, O; Felcini, M; Ferguson, T; Fesefeldt, H S; Fiandrini, E; Field, J H; Filthaut, Frank; Fisher, P H; Fisher, W; Fisk, I; Forconi, G; Freudenreich, Klaus; Furetta, C; Galaktionov, Yu; Ganguli, S N; García-Abia, P; Gataullin, M; Gentile, S; Giagu, S; Gong, Z F; Grenier, G; Grimm, O; Grünewald, M W; Guida, M; van Gulik, R; Gupta, V K; Gurtu, A; Gutay, L J; Haas, D; Hakobyan, R S; Hatzifotiadou, D; Hebbeker, T; Hervé, A; Hirschfelder, J; Hofer, H; Hohlmann, M; Holzner, G; Hou, S R; Hu, Y; Jin, B N; Jones, L W; de Jong, P; Josa-Mutuberria, I; Käfer, D; Kaur, M; Kienzle-Focacci, M N; Kim, J K; Kirkby, Jasper; Kittel, E W; Klimentov, A; König, A C; Kopal, M; Koutsenko, V F; Kräber, M H; Krämer, R W; Krenz, W; Krüger, A; Kunin, A; Ladrón de Guevara, P; Laktineh, I; Landi, G; Lebeau, M; Lebedev, A; Lebrun, P; Lecomte, P; Lecoq, P; Le Coultre, P; Le Goff, J M; Leiste, R; Levtchenko, M; Levchenko, P M; Li, C; Likhoded, S A; Lin, C H; Lin, W T; Linde, Frank L; Lista, L; Liu, Z A; Lohmann, W; Longo, E; Lü, Y S; Lübelsmeyer, K; Luci, C; Luminari, L; Lustermann, W; Ma Wen Gan; Malgeri, L; Malinin, A; Maña, C; Mangeol, D J J; Mans, J; Martin, J P; Marzano, F; Mazumdar, K; McNeil, R R; Mele, S; Merola, L; Meschini, M; Metzger, W J; Mihul, A; Milcent, H; Mirabelli, G; Mnich, J; Mohanty, G B; Muanza, G S; Muijs, A J M; Musicar, B; Musy, M; Nagy, S; Natale, S; Napolitano, M; Nessi-Tedaldi, F; Newman, H; Niessen, T; Nisati, A; Nowak, H; Ofierzynski, R A; Organtini, G; Palomares, C; Pandoulas, D; Paolucci, P; Paramatti, R; Passaleva, G; Patricelli, S; Paul, T; Pauluzzi, M; Paus, C; Pauss, Felicitas; Pedace, M; Pensotti, S; Perret-Gallix, D; Petersen, B; Piccolo, D; Pierella, F; Pioppi, M; Piroué, P A; Pistolesi, E; Plyaskin, V; Pohl, M; Pozhidaev, V; Pothier, J; Prokofiev, D O; Prokofev, D; Quartieri, J; Rahal-Callot, G; Rahaman, M A; Raics, P; Raja, N; Ramelli, R; Rancoita, P G; Ranieri, R; Raspereza, A V; Razis, P A; Ren, D; Rescigno, M; Reucroft, S; Riemann, S; Riles, K; Roe, B P; Romero, L; Rosca, A; Rosier-Lees, S; Roth, S; Rosenbleck, C; Roux, B; Rubio, Juan Antonio; Ruggiero, G; Rykaczewski, H; Sakharov, A; Saremi, S; Sarkar, S; Salicio, J; Sánchez, E; Sanders, M P; Schäfer, C; Shchegelskii, V; Schmidt-Kärst, S; Schmitz, D; Schopper, Herwig Franz; Schotanus, D J; Schwering, G; Sciacca, C; Servoli, L; Shevchenko, S; Shivarov, N; Shoutko, V; Shumilov, E; Shvorob, A V; Siedenburg, T; Son, D; Souga, C; Spillantini, P; Steuer, M; Stickland, D P; Stoyanov, B; Strässner, A; Sudhakar, K; Sultanov, G G; Sun, L Z; Sushkov, S V; Suter, H; Swain, J D; Szillási, Z; Tang, X W; Tarjan, P; Tauscher, Ludwig; Taylor, L; Tellili, B; Teyssier, D; Timmermans, C; Ting, Samuel C C; Ting, S M; Tonwar, S C; Tóth, J; Tully, C; Tung, K L; Ulbricht, J; Valente, E; Van de Walle, R T; Vásquez, R P; Veszpremi, V; Vesztergombi, G; Vetlitskii, I; Vicinanza, D; Viertel, Gert M; Villa, S; Vivargent, M; Vlachos, S; Vodopyanov, I; Vogel, H; Vogt, H; Vorobev, I; Vorobyov, A A; Wadhwa, M; Wallraff, W; Wang, X L; Wang, Z M; Weber, M; Wienemann, P; Wilkens, H; Wynhoff, S; Xia, L; Xu, Z Z; Yamamoto, J; Yang, B Z; Yang, C G; Yang, H J; Yang, M; Yeh, S C; Zalite, A; Zalite, Yu; Zhang, Z P; Zhao, J; Zhu, G Y; Zhu, R Y; Zhuang, H L; Zichichi, A; Zimmermann, B; Zöller, M

    2002-01-01

    Single top production in e^+e^- annihilations is searched for in data collected by the L3 detector at centre-of-mass energies from 189 to 209 GeV, corresponding to a total integrated luminosity of 634 pb-1. Investigating hadronic and semileptonic top decays, no evidence of single top production at LEP is obtained and upper limits on the single top cross section as a function of the centre-of-mass energy are derived. Limits on possible anomalous couplings, as well as on the scale of contact interactions responsible for single top production are determined.

  14. Single top quark production with CMS

    Directory of Open Access Journals (Sweden)

    Piccolo Davide

    2013-11-01

    Full Text Available Measurements of single top quark production performed using the CMS experiment [1] data collected in 2011 at centre-of-mass energies of 7 TeV and in 2012 at 8 TeV, are presented. The cross sections for the electroweak production of single top quarks in the t-channel and in association with W-bosons is measured and the results are used to place constraints on the CKM matrix element Vtb. Measurements of top quark properties in single top quark production are also presented. The results include the measurement of the charge ratio in the single top t-channel.

  15. CP Violation in Single Top Quark Production

    Energy Technology Data Exchange (ETDEWEB)

    Geng, Weigang [Michigan State Univ., East Lansing, MI (United States)

    2012-01-01

    We present a search for CP violation in single top quark production with the DØ experiment at the Tevatron proton-antiproton collider. CP violation in the top electroweak interaction results in different single top quark production cross sections for top and antitop quarks. We perform the search in the single top quark final state using 5.4 fb-1 of data, in the s-channel, t-channel, and for both combined. At this time, we do not see an observable CP asymmetry.

  16. Top quark physics at the LHC

    Directory of Open Access Journals (Sweden)

    Jeong Kim Tae

    2014-04-01

    Full Text Available In 2011, an integrated luminosity of more than 5 fb−1 at 7 TeV has been delivered by the LHC. The measurement of the cross section in top quark pair production and in single top quark production, top quark mass, top quark properties and new physics searches in top quark decays have been performed at the CMS experiment with various integrated luminosities. An overview of the latest results of these measurements and searches by the time of ICFP 2012 conference will be presented.

  17. Top flooding modeling with MAAP4 code

    International Nuclear Information System (INIS)

    Brunet-Thibault, E.; Marguet, S.

    2006-01-01

    An engineering top flooding model was developed in MAAP4.04d.4, the severe accident code used in EDF, to simulate the thermal-hydraulic phenomena that should take place if emergency core cooling (ECC) water was injected in hot leg during quenching. In the framework of the ISTC (International Science and Technology Centre), a top flooding test was proposed in the PARAMETER facility (Podolsk, Russia). The MAAP calculation of the PARAMETER top flooding test is presented in this paper. A comparison between top and bottom flooding was made on the bundle test geometry. According to this study, top flooding appears to cool quickly and effectively the upper plenum internals. (author)

  18. Searching for the top at UA2

    International Nuclear Information System (INIS)

    Unal, G.

    1990-10-01

    The projects conceived for searching the quark top, predicted by the Standard Model, are described. The required existence of the quark top from the Standard Model and its production from proton-antiproton collisions are reviewed. The UA2 experimental device is described. The method applied for the search of the top is explained. The analysis of the UA2 data does not allow to conclude the existence of the top. However, the low mass limit of 69 GeV/C 2 can be established for the top mass. The results of the analysis of the W decays into supersymmetric particles are included [fr

  19. Top down electroweak dipole operators

    Science.gov (United States)

    Fuyuto, Kaori; Ramsey-Musolf, Michael

    2018-06-01

    We derive present constraints on, and prospective sensitivity to, the electric dipole moment (EDM) of the top quark (dt) implied by searches for the EDMs of the electron and nucleons. Above the electroweak scale v, the dt arises from two gauge invariant operators generated at a scale Λ ≫ v that also mix with the light fermion EDMs under renormalization group evolution at two-loop order. Bounds on the EDMs of first generation fermion systems thus imply bounds on |dt |. Working in the leading log-squared approximation, we find that the present upper bound on |dt | is 10-19 e cm for Λ = 1 TeV, except in regions of finely tuned cancellations that allow for |dt | to be up to fifty times larger. Future de and dn probes may yield an order of magnitude increase in dt sensitivity, while inclusion of a prospective proton EDM search may lead to an additional increase in reach.

  20. Top Management Involvement in New Product Development

    DEFF Research Database (Denmark)

    Felekoglu, Burcu; Maier, Anja; Moultrie, James

    2010-01-01

    a broader conceptual space than this participation. This paper reviews the literature on top management involvement in new product development (NPD) and discusses relevance of different theoretical perspectives from other disciplines such as management, organisational behaviour and communication to analyse......Involvement of top managers in new product development (NPD) is a critical factor affecting NPD performance and frequently considered to be the participation of top management to certain activities in NPD or their NPD related behaviours. However, “Top management involvement in NPD” occupies...... antecedents, realisation and consequences of top management involvement in NPD. It is argued that top management has different involvement at different NPD levels: organisation level and project level. Resulting from this literature review, a tentative framework for top management involvement in NPD...

  1. Ravimimüüjate TOP 30 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Ravimimüüjate TOP 30 aastal 2002. Käibe TOP 30. Kasumi TOP 30. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Ravimimüüjad 2002: üld- ja finantsandmed

  2. Tekstiilitööstuse TOP 30 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Tekstiilitööstuse TOP 30. Kasumi TOP 30. Käibe TOP 30. Rentaabluse TOP 20. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Omakapitali tootlikkuse TOP 20. Tekstiilitööstuse ettevõtted 2002: üld- ja finantsandmed

  3. Trükitööstuste TOP 50

    Index Scriptorium Estoniae

    2002-01-01

    Trükitööstuste TOP 50. Käibe TOP 30. Käibe kasum TOP 30. Kasvu TOP 30. Kasumi kasvu TOP 30. Rentaabluse TOP. Varade tootlikkuse TOP. Trükitööstusettevõtete üldandmed. Trükitööstusettevõtete finantsandmed

  4. Rõivatööstuse TOP 40 aastal 2002

    Index Scriptorium Estoniae

    2003-01-01

    Rõivatööstuse TOP 40. Käibe TOP 40. Kasumi TOP 40. Käibe kasvu TOP 20. Kasumi kasvu TOP 20. Rentaabluse TOP 20. Omakapitali tootlikkuse TOP 20. Rõivatööstuse ettevõtted: üldandmed ja finantsandmed

  5. Läänemaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Läänemaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Läänemaa ettevõtete üld- ja finantsandmed

  6. Ida-Virumaa ettevõtete TOP 50

    Index Scriptorium Estoniae

    2005-01-01

    Ilmunud ka: Delovõje Vedomosti-Severo-Vostok 7. sept. lk. 4. Ida-Virumaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20; Ida-Virumaa ettevõtete üld- ja finantsandmed

  7. Toiduainetööstuse TOP 100 aastal 2001

    Index Scriptorium Estoniae

    2002-01-01

    TOP 100. Toiduainetööstuste rentaabluse TOP 40. Varade tootlikkuse TOP 40. Käibe TOP 50. Käibe kasvu TOP 50. Kasumi TOP 50. Kasumi kasvu TOP 50. Toiduainetööstuse finantsandmed aastal 2001. Toiduainetööstuse üldandmed aastal 2001

  8. Lääne-Virumaa TOP 100 aastal 2000

    Index Scriptorium Estoniae

    2001-01-01

    Lääne-Virumaa edukamad ettevõtted; Lääne-Virumaa käibe TOP 100; Käibe kasvu TOP 20; Käibe languse TOP 10; Kasumi TOP 20; Kasumi kasvu TOP 20; Rentabluse TOP 20; ROA TOP 20; Kasumi languse TOP 10; Kahjumi TOP 10; Lääne-Virumaa käibelt suuremate ettevõtete finantsandmed. Lääne-Virumaa ettevõtete üldandmed

  9. Top-of-Rail lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  10. Top medical news stories 2015

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2015-12-01

    Full Text Available No abstract available. Article truncated after 150 words. Here is our list of the top seven medical news stories for 2015 with special emphasis on the Southwest. 7. Wearable health devices: A wave of wearable computing devices such as Fitbit and UP wristbands have people keeping track of how much they sit, stand, walk, climb stairs and calories they consume (1. These fitness-tracking devices herald a series of devices that will detect and monitor serious diseases. However, these so-called medical-grade wearables require approval from the U.S. Food and Drug Administration, a regulatory hurdle avoided by the fitness-tracking devices which will likely slow their introduction. 6. Caitlyn Jenner: Caitlyn Jenner became the most famous transgender woman in the world following an interview published in Vanity Fair (2. The Vanity Fair website saw 11.6 million visits curious about the former Olympic athlete. Though Jenner publicly shared her gender identity, many transgender Americans do not-12% of gender non-conforming adults said they ...

  11. Measurement of top properties in ATLAS

    CERN Document Server

    Veloso, F; The ATLAS collaboration

    2010-01-01

    The top quark may play a special role in the Standard Model of particle physics. It is, for instance, the heaviest fundamental particle known, with a mass close to the electroweak symmetry breaking scale. Millions of top quark pairs will be produced per year at the LHC at nominal luminosity. ATLAS will measure many of the top quark properties with unprecedented precision. The ATLAS sensitivity studies done with Monte Carlo for the measurements of the top quark mass, the top quark charge, rare top quark decays and flavour changing neutral currents, the $t\\bar t$ spin correlations and $W$ boson polarization, the anomalous couplings at the $Wtb$ vertex and $t\\bar t$ resonances are reviewed.

  12. Qinshan CANDU project open top construction method

    International Nuclear Information System (INIS)

    Petrunik, K.J.; Wittann, K.; Khan, A.; Ricciuti, R.; Ivanov, A.; Chen, S.

    2003-01-01

    The significant schedule reductions achieved on the Qinshan CANDU Project were due in large part to the incorporation of advanced construction technologies in project design and delivery. For the Qinshan Project, a number of key advantages were realized through the use of the 'Open Top' construction method. This paper discusses the Qinshan Phase III CANDU Project Open Top implementation method. The Open Top method allowed major equipment to be installed simply, via the use of a Very Heavy Lift (VHL) crane and permitted the use of large-scale modularization. The advantages of Open Top construction, such as simplified access, more flexible project scheduling, improved construction safety and quality, and reduced labours are presented. The large-scale modularization of the Reactor Building Dousing System and the Open Top installation method and advantages relative to traditional CANDU 6 construction practices are also presented. Finally, major improvements for future CANDU plant construction using the Open Top method are discussed. (author)

  13. The significance of the heavy top quark

    International Nuclear Information System (INIS)

    Simmons, Elizabeth H.

    1997-01-01

    Experiment shows that the top quark is far heavier than the other elementary fermions. This finding has stimulated research on theories of electroweak and flavor symmetry breaking that include physics beyond the standard model. Efforts to accommodate a heavy top quark within existing frameworks have revealed constraints on model-building. Other investigations have started from the premise that a large top quark mass could signal a qualitative difference between the top quark and other fermions, perhaps in the form of new interactions peculiar to the top quark. Such new dynamics may also help answer existing questions about electroweak and flavor physics. This talk explores the implications of the heavy top quark in the context of weakly-coupled (e.g., SUSY) and strongly-coupled (e.g., technicolor) theories of electroweak symmetry breaking

  14. Top quark mass measurements with CMS

    CERN Document Server

    Kovalchuk, Nataliia

    2017-01-01

    Measurements of the top quark mass are presented, obtained from CMS data collected in proton-proton collisions at the LHC at centre-of-mass energies of 7 TeV and 8 TeV. The mass of the top quark is measured using several methods and channels, including the reconstructed invariant mass distribution of the top quark, an analysis of endpoint spectra as well as measurements from shapes of top quark decay distributions. The dependence of the mass measurement on the kinematic phase space is investigated. The results of the various channels are combined and compared to the world average. The top mass and also $\\alpha_{\\textnormal S}$ are extracted from the top pair cross section measured at CMS.

  15. TOP500 Supercomputers for November 2004

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2004-11-08

    24th Edition of TOP500 List of World's Fastest Supercomputers Released: DOE/IBM BlueGene/L and NASA/SGI's Columbia gain Top Positions MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 24th edition of the TOP500 list of the worlds fastest supercomputers was released today (November 8, 2004) at the SC2004 Conference in Pittsburgh, Pa.

  16. TOP500 Supercomputers for June 2004

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2004-06-23

    23rd Edition of TOP500 List of World's Fastest Supercomputers Released: Japan's Earth Simulator Enters Third Year in Top Position MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 23rd edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2004) at the International Supercomputer Conference in Heidelberg, Germany.

  17. Top Quark Production at Hadron Colliders

    Energy Technology Data Exchange (ETDEWEB)

    Phaf, Lukas Kaj [Univ. of Amsterdam (Netherlands)

    2004-03-01

    This thesis describes both theoretical and experimental research into top quark production. The theoretical part contains a calculation of the single-top quark production cross section at hadron colliders, at Next to Leading Order (NLO) accuracy. The experimental part describes a measurement of the top quark pair production cross section in proton-antiproton collisions, at a center of mass energy of 1.96 TeV.

  18. A table top exercise and workshop

    International Nuclear Information System (INIS)

    Lakey, J.R.A.

    1992-01-01

    Table top exercises are widely applied in training for emergency preparedness and have long been a feature of Courses on Planning for Nuclear Emergencies. Experience of a large number of table top exercises is used to provide a classification of the types of exercise indicating the application and the disadvantages. The use of workshops is considered to be complementary rather than an alternative to teaching methods available from table top exercises. (author)

  19. Top Physics at CMS/LHC

    Directory of Open Access Journals (Sweden)

    Daskalakis Georgios

    2017-01-01

    Full Text Available Recent results on the inclusive and differential production cross sections of top-quark pair and single top-quark processes are presented, obtained using data from proton-proton collisions collected with the CMS detector at the LHC. The large centre-of-mass energies available at LHC allow for the copious production of top-quark pairs in association with other final state particles at high transverse momentum. Measurements of such processes as well as of the top-quark mass and other properties will be discussed. The results are compared with the most up-to-date standard model theory predictions.

  20. Differential Top Cross-section Measurements

    CERN Document Server

    Fenton, Michael James; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle. The measurement of the differential top-quark pair production cross-section provides a stringent test of advanced perturbative QCD calculations. The ATLAS collaboration has performed detailed measurements of those differential cross sections at a centre-of-mass energy of 13 TeV. This talk focuses on differential cross-section measurements in the lepton+jets final state, including using boosted top quarks to probe our understanding of top quark production in the TeV regime.

  1. Top quark production cross-section measurements

    CERN Document Server

    Chen, Ye; The ATLAS collaboration

    2017-01-01

    Measurements of the inclusive and differential cross-sections for top-quark pair and single top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at center-of-mass energies of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. These measurements, including results using boosted tops, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For the t-channel single top measurement, the single top-quark and anti-top-quark total production cross-sections, their ratio, as well as differential cross sections are also presented. A measurement of the production cross-section of a single top quark in association with a W boson, the second largest single-top production mode, is also presented. Finally, measurements of ...

  2. Scenario-based table top simulations

    DEFF Research Database (Denmark)

    Broberg, Ole; Edwards, Kasper; Nielsen, J.

    2012-01-01

    This study developed and tested a scenario-based table top simulation method in a user-driven innovation setting. A team of researchers worked together with a user group of five medical staff members from the existing clinic. Table top simulations of a new clinic were carried out in a simple model...

  3. Experimental results on SUSY searches with top

    CERN Document Server

    Eifert, Till

    2014-01-01

    Searches for supersymmetric partner particles of the top and bottom quarks at the Large Hadron Collider are reviewed. The focus is on the status of searches for a relatively light partner of the top quark performed by the CMS and ATLAS Collaborations. No excess beyond Standard Model expectations is observed and exclusion limits are set on the masses of supersymmetric particles.

  4. Top quark property measurements at the LHC

    CERN Document Server

    Hawkings, Richard; The ATLAS collaboration

    2014-01-01

    Measurements of top quark properties performed at the Large Hadron Collider are reviewed, with a particular emphasis on top-pair charge asymmetries, spin correlations and polarization measurements performed by the ATLAS and CMS collaborations. The measurements are generally in good agreement with predictions from next-to-leading-order QCD calculations, and no deviations from Standard Model expectations have been seen.

  5. Top quark distributions in hadronic collisions

    CERN Document Server

    Frixione, Stefano; Nason, P; Ridolfi, G; Frixione, S; Mangano, M L; Nason, P; Ridolfi, G

    1995-01-01

    We present kinematical distributions for top quark pairs produced at the Tevatron \\ppbar\\ Collider, as predicted within Next-to-Leading-Order QCD. We consider single and double-inclusive distributions, and compare our results to those obtained with the shower Monte Carlo HERWIG. We discuss the implications of our findings for experimental issues such as the measurement of the top quark mass.

  6. Top 12 Web Resources for 2012

    Science.gov (United States)

    Gonzales, Lisa; Vodicka, Devin

    2012-01-01

    In this article, the authors describe some of the top websites recommended by colleagues for the Association of California School Administrators. The Top 12 for 2012 are: (1) Facebook (facebook.com); (2) Twitter (twitter.com); (3) Tungle (tungle.me); (4) FCMAT (fcmat.org); (5) YouSendIt (yousendit.com); (6) Slideshare (slideshare.net); (7) QR…

  7. Latest ATLAS measurements on top quark properties

    CERN Document Server

    Derue, Frederic; The ATLAS collaboration

    2017-01-01

    The top quark is unique among the known quarks in that it decays before it has an opportunity to form hadronic bound states. This makes measurements of its properties particularly interesting as one can access directly the properties of a bare quark. The latest measurements of these properties with the ATLAS detector at the LHC are presented using 8 TeV and 13 TeV data, excluding results from single top production. Measurements of top quark spin observables in top-antitop events, each sensitive to a different coefficient of the spin density matrix, are presented and compared to the Standard Model predictions. The helicity of the W boson from the top decays and the production angles of the top quark are further discussed. New results on the measurment of color flow effects in $t{\\bar t}$ events are presented. Limits on the rate of flavour changing neutral currents in the production or decay of the top quark are reported. The cross-section measurement of photons produced in association with top-quark pairs is a...

  8. Thermal design of top shield for PFBR

    International Nuclear Information System (INIS)

    Gajapathy, R.; Jalaludeen, S.; Selvaraj, A.; Bhoje, S.B.

    1988-01-01

    India's Liquid Metal Cooled Fast Breeder Reactor programme started with the construction of loop type 13MW(e) Fast Breeder Test Reactor (FBTR) which attained criticality in October 1985. With the experience of FBTR, the design work on pool type 500 MW(e) Prototype Fast Breeder Reactor (PFBR) which will be a forerunner for future commercial fast breeder reactors, has been started. The Top Shield forms the cover for the main vessel which contains the primary circuit. Argon cover gas separates the Top Shield from the free level of hot sodium pool (803K). The Top Shield which is of box type construction consists of control plug, two rotatable plugs and roof slab, assembled together, which provide biological shielding, thermal shielding and leak tight containment at the top of the main vessel. Heat is transferred from the sodium pool to the Top Shield through argon cover gas and through components supported by it and dipped in the sodium pool. The Top Shield should be maintained at the desired operating temperature by incorporating a cooling system inside it. Insulation may be provided below the bottom plate to reduce the heat load to the cooling system, if required. The thermal design of Top Shield consists of estimation of heat transfer to the Top Shield, selection of operating temperature, assessment of insulation requirement, design of cooling system and evaluation of transient temperature changes

  9. SWFSC/MMTD/CCE: Tagging and Tracking of Physeter (T-TOP/T-TOP2) 1997

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This research was devoted to studying sperm whale (Physeter macrocephalus) behavior. The principal study area for T-TOP and T-TOP2 was the Pioneer Seamount, 50...

  10. Measuring top-quark polarization in top-pair + missing-energy events.

    Science.gov (United States)

    Berger, Edmond L; Cao, Qing-Hong; Yu, Jiang-Hao; Zhang, Hao

    2012-10-12

    The polarization of a top quark can be sensitive to new physics beyond the standard model. Since the charged lepton from top-quark decay is maximally correlated with the top-quark spin, it is common to measure the polarization from the distribution in the angle between the charged lepton and the top-quark directions. We propose a novel method based on the charged lepton energy fraction and illustrate the method with a detailed simulation of top-quark pairs produced in supersymmetric top squark pair production. We show that the lepton energy ratio distribution that we define is very sensitive to the top-quark polarization but insensitive to the precise measurement of the top-quark energy.

  11. Top quark mass measurement in dilepton channel

    International Nuclear Information System (INIS)

    Lysak, R.

    2007-01-01

    In this work, we measured the top quark mass in tt'-' events produced in pp'-' interactions at the center-of-mass energy 1.96 TeV using CDF detector. We used dilepton in tt'-' events where both W bosons from top quarks are decaying into leptons. The data sample corresponds to 340 pb -1 . We found there 33 tt'-' candidates while expecting 10.5 ± 1.9 background events. In the measurement, we reconstruct one, representative mass for each event using the assumption about longitudinal momentum of in tt'-' system, in order to be able to kinematically solve the under-constrained system. The mass distributions (templates) are created for simulated signal and background events. Templates are parametrized in order to obtain smooth probability density functions. Likelihood maximization which includes these parametrized templates is then performed on reconstructed masses obtained from data sample in order to obtain final top quark mass estimate. The result of applying this procedure on data events is top quark mass estimate 169.5 +7. 7 - 7.2 (stat.) ± 4.0(syst.) GeV/c 2 for 30 out of 33 candidates, where the solution for top quark mass was found. This measurement was a part of first top quark mass measurement in dilepton channel at CDF in Run II. The top quark mass measured here is consistent with the CDF measurement in dilepton channel from Run I M top = 167.4 ± 10.3(stat.) ± 4.8(syst.) GeV/c 2 . Moreover, the combined result of four top quark mass measurements in dilepton channel from Run II (one of these four measurements is our measurement) M top = 167.9 ± 5.2(stat.) ± 3.7(syst.) GeV/c 2 significantly (by ∼ 40%) improved the precision of top quark mass determination from Run I. It should be also noted, that this combined result is consistent with measurement obtained in 'lepton+jets' channel at CDF in Run II (M top = 173.5 +3.9 -3.8 GeV/c 2 ). So, we don't have yet any indication about new physics beyond the Standard Model. My main contribution in this analysis was

  12. Top quark studies with the ATLAS detector

    CERN Document Server

    Capua, Marcella; The ATLAS collaboration

    2015-01-01

    The latest top quark studies in proton-proton collisions at a centre-of-mass energy of 7 and 8 TeV with the ATLAS detector are reported. We present recent results on the top pair production inclusive cross-sections, top pair production differential cross-section in the resolved and boosted regimes, single top-quark production cross-sections measured in the t-channel, s-channel and W-boson associated processes, as well as the CKM matrix element $|V_{tb}|$ determination. The results are compared with theoretical expectations. Latest ATLAS results on top properties will be also shown in terms of direct and mass pole, spin correlations and charge asymmetry.

  13. Top quark studies with the ATLAS detector

    CERN Document Server

    Capua, Marcella; The ATLAS collaboration

    2015-01-01

    The latest studies of top quark production measurement in proton-proton collisions at a centre-of-mass energy of 7 and 8 TeV with the ATLAS detector are reported. The talk will present recent results on the top pair production inclusive cross sections, top pair production differential cross section in resolved and boosted regime, single top-quark productions cross sections measured for t-channel, s-channel and W-boson associated processes. as well as d the CKM matrix element |Vtb| determination. All the results are compared with theoretical expectations. Latest ATLAS results on top mass measurements will be also shown in terms of direct and mass pole results.

  14. TOP500 Supercomputers for June 2002

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2002-06-20

    19th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 19th edition of the TOP500 list of the worlds fastest supercomputers was released today (June 20, 2002). The recently installed Earth Simulator supercomputer at the Earth Simulator Center in Yokohama, Japan, is as expected the clear new number 1. Its performance of 35.86 Tflop/s (trillions of calculations per second) running the Linpack benchmark is almost five times higher than the performance of the now No.2 IBM ASCI White system at Lawrence Livermore National Laboratory (7.2 Tflop/s). This powerful leap frogging to the top by a system so much faster than the previous top system is unparalleled in the history of the TOP500.

  15. Top quark production at the LHC

    CERN Document Server

    Ferreira da Silva, Pedro

    2016-01-01

    Twenty years past its discovery, the top quark continues attracting great interest as experiments keep unveiling its properties. An overview of the latest measurements in the domain of top quark production, performed by the ATLAS and CMS experiments at the CERN LHC, is given. The latest measurements of top quark production rates via strong and electroweak processes are reported and compared to different perturbative QCD predictions. Fundamental properties, such as the mass or the couplings of the top quark, as well as re-interpretations seeking for beyond the standard model contributions in the top quark sector, are extracted from these measurements. In each case an attempt to highlight the first results and main prospects for the on-going Run 2 of the LHC is made.

  16. D OE top quark mass analysis

    International Nuclear Information System (INIS)

    Strovink, M.

    1995-07-01

    Based on (44-48 pb -1 ) of lepton + jets data, we review D0's initial analysis of the top quark mass. The result, M top = 199 ± 19/21 (stat.) ± 22 (syst.) GeV/c 2 , is insensitive to background normalization. The errors are based on ISAJET top Monte Carlo, with its more severe gluon radiation, and allow for ISAJET/HERWIG differences. Good progress is being made in reducing the systematic error. We present a new study based on two-dimensional distributions of reconstructed top quark vs. dijet mass. With 98.7% confidence we observe a peak in the top mass - dijet mass plane. The peak and its projections are similar both in shape and magnitude to expectations based on the decay sequence 1 → bW, W → jj

  17. Top quark production at the LHC (single top and tt-bar cross sections)

    International Nuclear Information System (INIS)

    Lange, J.

    2014-01-01

    With the large number of top quarks produced at the LHC, top quark physics enters an era of precision and properties measurements. This article reviews the recent advances in top quark cross section measurements performed by ATLAS and CMS using data recorded in 2011 with integrated luminosities up to 5 fb -1 . They include precision inclusive cross sections, the establishment of challenging channels, first differential cross section measurements and single top production. An overall good agreement with Standard Model predictions is observed

  18. Measurements and searches with top quarks

    International Nuclear Information System (INIS)

    Peters, Reinhild Yvonne

    2008-01-01

    In 1995 the last missing member of the known families of quarks, the top quark, was discovered by the CDF and D0 experiments at the Tevatron, a proton-antiproton collider at Fermilab near Chicago. Until today, the Tevatron is the only place where top quarks can be produced. The determination of top quark production and properties is crucial to understand the Standard Model of particle physics and beyond. The most striking property of the top quark is its mass--of the order of the mass of a gold atom and close to the electroweak scale--making the top quark not only interesting in itself but also as a window to new physics. Due to the high mass, much higher than of any other known fermion, it is expected that the top quark plays an important role in electroweak symmetry breaking, which is the most prominent candidate to explain the mass of particles. In the Standard Model, electroweak symmetry breaking is induced by one Higgs field, producing one additional physical particle, the Higgs boson. Although various searches have been performed, for example at the Large Electron Positron Collider (LEP), no evidence for the Higgs boson could yet be found in any experiment. At the Tevatron, multiple searches for the last missing particle of the Standard Model are ongoing with ever higher statistics and improved analysis techniques. The exclusion or verification of the Higgs boson can only be achieved by combining many techniques and many final states and production mechanisms. As part of this thesis, the search for Higgs bosons produced in association with a top quark pair (t(bar t)H) has been performed. This channel is especially interesting for the understanding of the coupling between Higgs and the top quark. Even though the Standard Model Higgs boson is an attractive candidate, there is no reason to believe that the electroweak symmetry breaking is induced by only one Higgs field. In many models more than one Higgs boson are expected to exist, opening even more channels

  19. Discovery of single top quark production

    Energy Technology Data Exchange (ETDEWEB)

    Gillberg, Dag [Simon Fraser Univ., Burnaby, BC (Canada)

    2009-04-01

    The top quark is by far the heaviest known fundamental particle with a mass nearing that of a gold atom. Because of this strikingly high mass, the top quark has several unique properties and might play an important role in electroweak symmetry breaking - the mechanism that gives all elementary particles mass. Creating top quarks requires access to very high energy collisions, and at present only the Tevatron collider at Fermilab is capable of reaching these energies. Until now, top quarks have only been observed produced in pairs via the strong interaction. At hadron colliders, it should also be possible to produce single top quarks via the electroweak interaction. Studies of single top quark production provide opportunities to measure the top quark spin, how top quarks mix with other quarks, and to look for new physics beyond the standard model. Because of these interesting properties, scientists have been looking for single top quarks for more than 15 years. This thesis presents the first discovery of single top quark production. An analysis is performed using 2.3 fb-1 of data recorded by the D0 detector at the Fermilab Tevatron Collider at centre-of-mass energy √s = 1.96 TeV. Boosted decision trees are used to isolate the single top signal from background, and the single top cross section is measured to be σ(p$\\bar{p}$ → tb + X, tqb + X) = 3.74-0.74+0.95 pb. Using the same analysis, a measurement of the amplitude of the CKM matrix element Vtb, governing how top and b quarks mix, is also performed. The measurement yields: |V{sub tb}|f1L| = 1.05 -0.12+0.13, where f1L is the left-handed Wtb coupling. The separation of signal from background is improved by combining the boosted decision trees with two other multivariate techniques. A new cross section measurement is performed, and the significance for the excess over the predicted background exceeds 5

  20. The Top Quark, QCD, And New Physics.

    Science.gov (United States)

    Dawson, S.

    2002-06-01

    The role of the top quark in completing the Standard Model quark sector is reviewed, along with a discussion of production, decay, and theoretical restrictions on the top quark properties. Particular attention is paid to the top quark as a laboratory for perturbative QCD. As examples of the relevance of QCD corrections in the top quark sector, the calculation of e{sup+}e{sup -}+ t{bar t} at next-to-leading-order QCD using the phase space slicing algorithm and the implications of a precision measurement of the top quark mass are discussed in detail. The associated production of a t{bar t} pair and a Higgs boson in either e{sup+}e{sup -} or hadronic collisions is presented at next-to-leading-order QCD and its importance for a measurement of the top quark Yulrawa coupling emphasized. Implications of the heavy top quark mass for model builders are briefly examined, with the minimal supersymmetric Standard Model and topcolor discussed as specific examples.

  1. Top Quark Mass Measurement in Dilepton Channel

    Energy Technology Data Exchange (ETDEWEB)

    Lysak, Roman [Inst. of Experimental Physics, Kosice (Slovak Republic)

    2007-06-01

    We present a measurement of the top quark mass from events produced in p$\\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using the Collider Detector at Fermilab. We identify t$\\bar{t}$ candidates where both W bosons from the top quarks decay into leptons (eν, µν, τν) from a data sample of 340 pb-1. The top quark mass is reconstructed in each event separately by the method which draw upon simulated distribution of t$\\bar{t}$ longitudinal momentum in order to extract probability distribution for the top quark mass. Representative distributions, or templates, are constructed from simulated samples of signal and background events, and parametrized to form continuous probability density functions. A likelihood fit incorporating these parametrized templates is then performed on the data sample masses in order to derive a final top quark mass. Measured top quark mass is Mtop = 169.5$+7.7\\atop{-7.2}$(stat.) ± 4.0(syst.) GeV/c2.

  2. Measurement of the top quark mass

    International Nuclear Information System (INIS)

    Blusk, Steven R.

    1998-01-01

    The first evidence and subsequent discovery of the top quark was reported nearly 4 years ago. Since then, CDF and D0 have analyzed their full Run 1 data samples, and analysis techniques have been refined to make optimal use of the information. In this paper, we report on the most recent measurements of the top quark mass, performed by the CDF and D0 collaborations at the Fermilab Tevatron. The CDF collaboration has performed measurements of the top quark mass in three decay channels from which the top quark mass is measured to be 175.5 ± 6.9 GeV=c 2 . The D0 collaboration combines measurements from two decay channels to obtain a top quark mass of 172.1 ± 7.1 GeV/c 2 . Combining the measurements from the two experiments, assuming a 2 GeV GeV/c 2 correlated systematic uncertainty, the measurement of the top quark mass at the Tevatron is 173.9 ± 5.2 GeV/c 2 . This report presents the measurements of the top quark mass from each of the decay channels which contribute to this measurement

  3. Hadronization systematics and top mass reconstruction

    Directory of Open Access Journals (Sweden)

    Corcella Gennaro

    2014-01-01

    Full Text Available I discuss a few issues related to the systematic error on the top mass mea- surement at hadron colliders, due to hadronization effects. Special care is taken about the impact of bottom-quark fragmentation in top decays, especially on the reconstruction relying on final states with leptons and J/Ψ in the dilepton channel. I also debate the relation between the measured mass and its theoretical definition, and report on work in progress, based on the Monte Carlo simulation of fictitious top-flavoured hadrons, which may shed light on this issue and on the hadronization systematics.

  4. TOP500 Supercomputers for June 2005

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2005-06-22

    25th Edition of TOP500 List of World's Fastest Supercomputers Released: DOE/L LNL BlueGene/L and IBM gain Top Positions MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 25th edition of the TOP500 list of the world's fastest supercomputers was released today (June 22, 2005) at the 20th International Supercomputing Conference (ISC2005) in Heidelberg Germany.

  5. Top quark pair production in ATLAS

    CERN Document Server

    Moreno Llacer, M; The ATLAS collaboration

    2010-01-01

    Top-quark pairs are expected to be produced at the LHC, even at the lower beam energy and luminosity in the first years of running. Establishing the top-pair signal and measuring the production cross-section are important benchmarks for ATLAS, and will help understand the detector performance for events with high-pT leptons, high jet multiplicity, missing transverse energy. The prospects for early top physics measurements will be shown, with a particular emphasis on the progress achieved with data so far.

  6. Search for top in UA2

    International Nuclear Information System (INIS)

    Repellin, J.P.

    1989-01-01

    A search for the top quark in the data collected during 1988 by the UA2 collaboration at the CERN proton-antiproton collider is presented. In UA2 the selected decay mode is t → eν-barb. The present report is limited to the study of topologies with an electron, a neutrino, and two or more jets. With an integrated luminosity of 2.5 pb -1 the data do not show any contribution from top and at this preliminary stage of the analysis a top mass between 30 and 60 GeV seems excluded. (K.A.) 9 refs.; 9 figs.; 2 tabs

  7. Precision Determination of the Top Quark Mass

    Energy Technology Data Exchange (ETDEWEB)

    Movilla Fernandez, Pedro A.; /LBL, Berkeley

    2007-05-01

    The CDF and D0 collaborations have updated their measurements of the mass of the top quark using proton-antiproton collisions at {radical}s = 1.96 TeV produced at the Tevatron. The uncertainties in each of the top-antitop decay channels have been reduced. The new Tevatron average for the mass of the top quark based on about 1 fb{sup -1} of data per experiment is 170.9 {+-} 1.8 GeV/c{sup 2}.

  8. Top quark mass measurement at the Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes da Costa, Joao; /Harvard U.

    2004-12-01

    The authors report on the latest experimental measurements of the top quark mass by the CDF and D0 Collaborations at the Fermilab Tevatron. They present a new top mass measurement using the t{bar t} events collected by the D0 Collaboration in Run I between 1994 and 1996. This result is combined with previous measurements to yield a new world top mass average. They also describe several preliminary results using up to 193 pb{sup -1} of t{bar t} events produced in {bar p}p collisions at {radical}s = 1.96 TeV during the Run II of the Tevatron.

  9. Global constraints on top quark anomalous couplings

    Science.gov (United States)

    Déliot, Frédéric; Faria, Ricardo; Fiolhais, Miguel C. N.; Lagarelhos, Pedro; Onofre, António; Pease, Christopher M.; Vasconcelos, Ana

    2018-01-01

    The latest results on top quark physics, namely single top quark production cross sections, W -boson helicity and asymmetry measurements are used to probe the Lorentz structure of the W t b vertex. The increase of sensitivity to new anomalous physics contributions to the top quark sector of the standard model is quantified by combining the relevant results from Tevatron and the Large Hadron Collider. The results show that combining an increasing set of available precision measurements in the search for new physics phenomena beyond the standard model leads to significant sensitivity improvements, especially when compared with the current expectation for the High Luminosity run at the LHC.

  10. The de Sitter relativistic top theory

    International Nuclear Information System (INIS)

    Armenta, J.; Nieto, J.A.

    2005-01-01

    We discuss the relativistic top theory from the point of view of the de Sitter (or anti-de Sitter) group. Our treatment rests on the Hanson-Regge spherical relativistic top Lagrangian formulation. We propose an alternative method for studying spinning objects via Kaluza-Klein theory. In particular, we derive the relativistic top equations of motion starting with the geodesic equation for a point particle in 4+N dimensions. We compare our approach with Fukuyama's formulation of spinning objects, which is also based on Kaluza-Klein theory. We also report a generalization of our approach to a 4+N+D dimensional theory

  11. New Physics in Single-Top Production

    CERN Document Server

    Lohse, T; The ATLAS collaboration

    2014-01-01

    In this paper an overview of recent results on the search for physics beyond the Standard Model in the electro-weak top-quark production from the ATLAS, D0 , CDF and CMS collaborations is given. This includes searches for W' and b$^∗$ resonances as well as measurements of CP violation, the W helicity fractions and the top-quark polarisation in single-top production. A brief review on the search for flavour-changing neutral currents and cross-section measurements with respect to the CKM matrix element $V_{tb}$ is given.

  12. Top physics in ATLAS and CMS

    CERN Document Server

    Diez, Carmen

    2018-01-01

    A selection of recent results of top quark production performed by the ATLAS and CMS Collaborations at the LHC is presented. The results include measurements of top quark pair production, including inclusive and differential cross sections, as well as cross sections for ${\\rm t\\bar{t}}$ production in association with additional heavy-quark jets or additional bosons. The production of single top quarks via t-channel, tW associated production, and in association with a Z boson is also discussed. The results discussed are mostly obtained using data collected in proton-proton collisions at centre-of-mass energies of 8 and 13 TeV.

  13. Women in Top Management and Firm Performance

    DEFF Research Database (Denmark)

    Smith, Nina; Smith, Valdemar; Verner, Mette

    -observations for all Danish firms with more than 50 employees over the period 1994-2003, the analysis suggests that the proportion of women in top management jobs has from none to positive influence on firm performance. However, the results show that the strength of the effects of women in top management depends...... on how top CEOs are defined and on the method of estimation of the model. Next, the results point towards a positive influence on firm performance of the staff representation in the supervisory board of the firm but more women representing the shareholders in the supervisory board of the firm seems...

  14. Toiduainetööstuse TOP 100 aastal 2000

    Index Scriptorium Estoniae

    2001-01-01

    Toiduainetööstuse käibe TOP 75; Toiduainetööstuse käibekasvu TOP 60; Toiduainetööstuse kasumi TOP 80; Kahjumi TOP 15; Toiduainetööstuse kasumi kasvu TOP 60; Rentaabluse TOP 50; varade tootlikkuse TOP 50; Toiduainetööstuse finantsandmed aastal 2000; Toiduainetööstuse üldandmed aastal 2000

  15. Giving top quark effective operators a boost

    CERN Document Server

    Englert, Christoph

    2016-01-01

    We investigate the prospects to systematically improve generic effective field theory-based searches for new physics in the top sector during LHC run 2 as well as the high luminosity phase. In particular, we assess the benefits of high momentum transfer final states on top EFT-fit as a function of systematic uncertainties in comparison with sensitivity expected from fully-resolved analyses focusing on $t\\bar t$ production. We find that constraints are typically driven by fully-resolved selections, while boosted top quarks can serve to break degeneracies in the global fit. This demystifies and clarifies the importance of high momentum transfer final states for global fits to new interactions in the top sector from direct measurements.

  16. Top 10 Myths about Cardiovascular Disease

    Science.gov (United States)

    ... Thromboembolism Aortic Aneurysm More Top 10 Myths about Cardiovascular Disease Updated:Mar 16,2018 How much do ... Healthy This content was last reviewed July 2015. Cardiovascular Conditions • Conditions Home • Arrhythmia and Atrial Fibrillation • Cardiac ...

  17. Queen's discovery lauded by top scientific journal

    CERN Multimedia

    McGrady, S

    2002-01-01

    A scientific breakthrough at Queen's University's Sudbury Neutrino Observatory has received major international recognition. The journal Science ranked the discovery that cracked the "neutrino problem" second, in the journal's top 10 scientific achievements of 2002 (1/2 page).

  18. Impact loads on the pressure vessel top

    International Nuclear Information System (INIS)

    Krieg, R.; Malmberg, T.; Messemer, G.

    1995-01-01

    A steam explosion can cause core melt to be bounced against the internal side of the RPV top. The bouncing velocity up to which the top can withstand the impact is to be determined. Plausible assumptions about a core melt mass of 80000 kg result in a tolerable maximum bouncing velocity of about 200 m/s. Reliable estimates are expected from the BERDA experiments simulating a pessimistic course of events on a 1:10 scale. (orig.)

  19. Search for single top production at HERA

    International Nuclear Information System (INIS)

    Brandt, G.

    2008-01-01

    A search for single top production in e p collisions using the complete high-energy data from HERA is presented. This search is based on the analysis of events containing isolated leptons (electronic or muons) and missing transverse momentum P T miss . In the absence of a signal, an upper limit on the top production cross-section σ ep→etX tuγ T miss and the measurements of W boson polarisation fractions.

  20. Search for the top quark with CDF

    International Nuclear Information System (INIS)

    Barbaro-Galtieri, A.

    1991-01-01

    During the 1988--89 Tevatron Collider run the CDF detector has collected data for an integrated luminosity of 4.4 pb -1 . The sample has been used to search for the top quark in several topologies. Preliminary results show that a top mass below 89 GeV is excluded at the 95% confidence level, thus extending the limit of 77 GeV previously published by CDF. 14 refs., 8 figs

  1. Single Top-Quark Production at CDF

    CERN Multimedia

    CERN. Geneva

    2008-01-01

    The main challenge of the single top-quark search at the Tevatron is the huge background from W+jets events and QCD events, which makes the use of advanced multivariate techniques essential. The recent single top analyses using either the matrix element method, neural networks, likelihood discriminants or boosted decision trees as well as the combination of the former three analyses will be presented...

  2. Top Production Properties in ATLAS & CMS

    CERN Document Server

    Neep, Thomas James; The ATLAS collaboration

    2017-01-01

    The large mass and short lifetime of the top quark mean that it decays before forming bound states. This allows the top quark to be studied as a bare quark and opens up the possibility to measure many properties that can not be probed using other quarks. Precise study of these properties, including spin correlations, polarisations and asymmetries, may shed light on possible physics beyond the Standard Model.

  3. The discovery of the top quark

    International Nuclear Information System (INIS)

    Sinervo, P.K.

    1995-12-01

    The top quark and the Higgs boson are the heaviest elementary particles predicted by the standard model. The four lightest quark flavours, the up, down, strange and charm quarks, were well-established by the mid-1970's. The discovery in 1977 of the Τ resonances, a new family of massive hadrons, required the introduction of the fifth quark flavour. Experimental and theoretical studies have indicated that this quark also has a heavier partner, the top quark

  4. The Discovery of the Top Quark

    Science.gov (United States)

    Sinervo, P.K.

    1995-12-01

    The top quark and the Higgs boson are the heaviest elementary particles predicted by the standard model. The four lightest quark flavours, the up, down, strange and charm quarks, were well-established by the mid-1970's. The discovery in 1977 of the {Tau} resonances, a new family of massive hadrons, required the introduction of the fifth quark flavour. Experimental and theoretical studies have indicated that this quark also has a heavier partner, the top quark.

  5. Anomalous couplings in single top and searches for rare top quark couplings with the ATLAS detector

    CERN Document Server

    Cabrera Urban, Susana; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle and probing its couplings with the other fundamental particle may open a window to physics beyond the Standard Model. Single top-quark production provides a unique window to study the coupling between the top quark, the W boson and the b quark, since it involves the $Wtb$ vertex in both production and decay. Measurements of angular correlations in single top quark events in the t-channel exchange of a W boson are presented based on the 8 TeV ATLAS dataset. Differential cross-sections are measured as a function of angular variables that are sensitive to anomalous contributions to the Wtb vertex and the top quark polarization. Searches for flavour-changing neutral current top-quark interactions are also discussed based on the 8 TeV and 13 TeV ATLAS dataset. Searches for rare top quark decays to Higgs and Z bosons are presented in top quark production, and searches for rare top quark interactions with gluons and Z bosons are presented in single top quark p...

  6. Recent top physics results from CMS

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    The top quark, discovered in 1995 at the Tevatron, is the heaviest known elementary particle. The largeness of its mass gives rise to a number of peculiar properties: top quarks decay before they would hadronize and the measurement of their decay products provides direct access to its properties such as spin, charge, or polarization. The top quark couples most strongly with the Higgs boson, and plays a key role in the electro-weak symmetry breaking and in many scenarios of physics beyond the Standard Model. With its large center-of-mass energy and luminosity, the LHC produces top quarks in copious quantities, giving access to many new precision measurements. In this seminar, I will present recent measurements from the CMS experiment. I will focus in particular on the results on single-top quark production, where results are available in all production modes, the t-, the s- and the tW-channels. Furthermore, I will present recent measurements of top quark properties as well as searches for anomalous couplings ...

  7. 5 CFR 1312.27 - Top secret control.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Top secret control. 1312.27 Section 1312... Classified Information § 1312.27 Top secret control. The EOP Security Officer serves as the Top Secret... Top Secret material. The ATSCOs will be responsible for the accountability and custodianship of Top...

  8. Prediction of top oil temperature for transformers

    Science.gov (United States)

    He, Qing

    2000-11-01

    When a transformer's winding gets too hot, either the load has to be reduced as a short-term solution or another transformer bay needs to be installed as a long-term plan. To decide on whether to deploy either of these two strategies, one should be able to predict the transformer temperature accurately. In this work, the traditional top-oil-rise model, top-oil model (which includes an ambient temperature) and semi-physical top-oil model are compared. The semi-physical top-oil model outperforms the other two models. Several attempts are also reported to improve the model used for top-oil temperature (TOT) prediction. It is shown that regardless of the order or complexity of the model, no model performs significantly better than the semi-physical top-oil model investigated; moreover, many models have performance measures that are approximately the same as the semi-physical model. Some of the sources of error that affect top-oil temperature prediction are studied here. Experimentation with various discretization schemes and models convinces the author that the semi-physical top-oil model used to predict transformer temperature is near optimal and that other sources of input-data error are frustrating the author's attempt to reduce the prediction error Further. The research demonstrates that the input error caused by database quantization, remote ambient temperature monitoring and low sampling rate accounts for about two-thirds of the error experienced with field data. The results of these simulations also show that the error caused by these sources is less than that obtained when using equivalent field data. It is the opinion of the author that most of this difference is due to the absence of significant driving variables, rather than the approximation used in constructing a semi-physical model. To further improve the error performance of the semi-physical top-oil model, three different neural network models including static neural network, temporal processing network

  9. Top-philic scalar Dark Matter with a vector-like fermionic top partner

    OpenAIRE

    Baek, Seungwon; Ko, Pyungwon; Wu, Peiwen

    2016-01-01

    We consider a simple extension of the Standard Model with a scalar top-philic Dark Matter (DM) $S$ coupling, apart from the Higgs portal, exclusively to the right-handed top quark $t_R$ and a colored vector-like top partner $T$ with a Yukawa coupling $y_{ST}$ which we call the topVL portal. When the Higgs portal is closed and $y_{ST}$ is perturbative $ (\\lesssim 1)$, $TS\\to (W^+b, gt)$, $SS\\to t\\bar{t}$ and $T\\bar{T}\\to (q\\bar{q},gg)$ provide the dominant (co)annihilation contributions to obt...

  10. Single top quarks and dark matter

    Science.gov (United States)

    Pinna, Deborah; Zucchetta, Alberto; Buckley, Matthew R.; Canelli, Florencia

    2017-08-01

    Processes with dark matter interacting with the standard model fermions through new scalars or pseudoscalars with flavor-diagonal couplings proportional to fermion mass are well motivated theoretically, and provide a useful phenomenological model with which to interpret experimental results. Two modes of dark matter production from these models have been considered in the existing literature: pairs of dark matter produced through top quark loops with an associated monojet in the event, and pair production of dark matter with pairs of heavy flavored quarks (tops or bottoms). In this paper, we demonstrate that a third, previously overlooked channel yields a non-negligible contribution to LHC dark matter searches in these models. In spite of a generally lower production cross section at LHC when compared to the associated top-pair channel, non-flavor violating single top quark processes are kinematically favored and can significantly increase the sensitivity to these models. Including dark matter production in association with a single top quark through scalar or pseudoscalar mediators, the exclusion limit set by the LHC searches for dark matter can be improved by 30% up to a factor of two, depending on the mass assumed for the mediator particle.

  11. Monotop signature from a fermionic top partner

    Science.gov (United States)

    Gonçalves, Dorival; Kong, Kyoungchul; Sakurai, Kazuki; Takeuchi, Michihisa

    2018-01-01

    We investigate monotop signatures arising from phenomenological models of fermionic top partners, which are degenerate in mass and decay into a bosonic dark matter candidate, either spin 0 or spin 1. Such a model provides a monotop signature as a smoking gun, while conventional searches with t t ¯ + missing transverse momentum are limited. Two such scenarios, (i) a phenomenological third generation extradimensional model with excited top and electroweak sectors, and (ii) a model where only a top partner and a dark matter particle are added to the standard model, are studied in the degenerate mass regime. We find that in the case of extra dimension a number of different processes give rise to effectively the same monotop final state, and a great gain can be obtained in the sensitivity for this channel. We show that the monotop search can explore top-partner masses up to 630 and 300 GeV for the third generation extradimensional model and the minimal fermionic top-partner model, respectively, at the high luminosity LHC.

  12. Top physics at CLIC and ILC

    CERN Document Server

    AUTHOR|(SzGeCERN)442572

    2016-11-11

    Measurements of top quark production at $e^+e^-$ colliders can provide a leap in precision in our knowledge of top quark properties and open a new window on physics beyond the Standard Model. In this contribution the top quark physics prospects of linear colliders is reviewed. Progress in detailed full-simulation studies is reported for the highlights of the program. We present the prospects for a measurement of the top quark mass and width in a scan of the beam energy through the pair production threshold, and discuss new studies of alternative measurements in continuum production, which are also capable of a precise determination of the mass in a rigorously defined mass scheme. A precision of 50 MeV on the $\\overline{MS}$ mass is expected when taking into account the dominant systematic uncertainties. Another key measurement is the study of the top quark couplings to electroweak gauge bosons, where form factors can be determined to 1% precision, an order of magnitude better than those from the full LHC prog...

  13. Consumer evaluation of palatability characteristics of a beef value-added cut compared to common retail cuts.

    Science.gov (United States)

    Lepper-Blilie, A N; Berg, E P; Germolus, A J; Buchanan, D S; Berg, P T

    2014-01-01

    The objectives of this study were to educate consumers about value-added beef cuts and evaluate their palatability responses of a value cut and three traditional cuts. Three hundred and twenty-two individuals participated in the beef value cut education seminar series presented by trained beef industry educators. Seminar participants evaluated tenderness, juiciness, flavor, and overall like of four samples, bottom round, top sirloin, ribeye, and a value cut (Delmonico or Denver), on a 9-point scale. The ribeye and the value cut were found to be similar in all four attributes and differed from the top sirloin and bottom round. Correlations and regression analysis found that flavor was the largest influencing factor for overall like for the ribeye, value cut, and top sirloin. The value cut is comparable to the ribeye and can be a less expensive replacement. © 2013.

  14. D-Zero top quark mass analysis

    International Nuclear Information System (INIS)

    Strovink, M.

    1996-10-01

    I report on D null's preliminary analyses of the top quark mass m t based on an exposure at √s = 1.8 TeV with integrated luminosity ∼100 pb -1 at the Fermilab Tevatron p anti p collider. From three e + μ + ≥ 2 jet events (with background 0.36 ± 0.09), using partly original methods, we obtain m t = 158 ± 24(stat) ± 10(syst) GeV/c 2 . From 30 e or μ + ±4 jets events (with background 17.4 ±2.2), we find m t = 170 ± 15(stat) ± 10(syst) GeV/c 2 . Recently, using multivariate methods based on particular kinematic variables, we have learned how to improve the background suppression in the latter sample without unduly distorting the reconstructed top mass spectra. Applying these methods should improve considerably the accuracy of our top quark mass determination

  15. Workshop: Waiting for the top quark

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The world of elementary particle physics is eagerly waiting for the top quark, probably the final element of the 'periodic table' of elementary particle constituents. This table consists of two families of weakly interacting particles (leptons) - one series carrying electric charge; the other being electrically neutral - together with a family of quarks carrying electric charge 2/3 (up, charm, top) and a family of charge -1/3 quarks (down, strange, beauty). It was then not surprising that the 1990 Theory Workshop at the DESY Laboratory in Hamburg in October, devoted this time to 'top physics', attracted some 200 physicists, substantially more than previous workshops in the series

  16. Top quark physics in ATLAS (CORFU 2014)

    CERN Document Server

    Moreno Llácer, M; The ATLAS collaboration

    2014-01-01

    The top quark is the heaviest elementary particle observed to date. Being heavier than a W boson, it is the only quark that decays weakly, i.e. into a real W boson and a b quark, before hadronization can occur. In addition, it is the only quark whose Yukawa coupling to the Higgs boson is order of unity. For these reasons the top quark plays a special role in the Standard Model of Particle Physics and in many of its extensions. An accurate knowledge of its properties (mass, couplings, production cross section, decay branching ratios, etc.) can bring key information on fundamental interactions at the electroweak breaking scale and beyond. In this talk the latest measurements of the characteristics of the top quark carried out in the ATLAS experiment at the Large Hadron Collider are presented.

  17. Anomalous creation and decay of top quarks

    CERN Document Server

    Hasegawa, S; The ATLAS collaboration

    2012-01-01

    Due to the top quark’s mass of 173.5 GeV/c2 which is around the energy scale of the spon- taneous symmetry breaking, appearance of new physics can be expected in its production and decay as an anomaly from the standard model expectation. The ATLAS and the CMS experiments have accumulated about 5 fb−1 of data of proton-proton collisions with 7 TeV center of mass energy in 2011, in which 800,000 top quarks pairs are expected. With this high statistics, the ATLAS and the CMS collaborations have investigated the top quark’s production and decay precisely and have reported the results consistent with the standard model.

  18. Optimal Taxation, Inequality and Top Incomes

    OpenAIRE

    Andrienko, Yuri; Apps, Patricia; Rees, Ray

    2014-01-01

    In a number of high-income countries over the past few decades there has been a large growth in income inequality and at the same time a shift in the burden of taxation from the top to the middle of the income distribution. This paper applies the theory of optimal piecewise linear taxation to the issue of the taxation of top incomes. Our results suggest that an appropriate response to rising inequality is a shift towards a more progressive multi-bracket income tax system, with a more differen...

  19. Boosted top production in ATLAS and CMS

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00237277; The ATLAS collaboration

    2017-01-01

    An overview of the boosted top production analyses using data collected by the ATLAS and CMS experiments at $\\sqrt{s}=$' 8 TeV and 13 TeV of proton-proton collisions at the LHC is presented. These analyses use techniques for the reconstruction of boosted objects to measure the production of top quarks at high transverse momenta. The measurements are optimized for the different final states and for different ranges of the transverse momenta of the particles involved, improving on measurements with traditional objects reconstruction based on the combination of resolved objects.

  20. New multigrid solver advances in TOPS

    International Nuclear Information System (INIS)

    Falgout, R D; Brannick, J; Brezina, M; Manteuffel, T; McCormick, S

    2005-01-01

    In this paper, we highlight new multigrid solver advances in the Terascale Optimal PDE Simulations (TOPS) project in the Scientific Discovery Through Advanced Computing (SciDAC) program. We discuss two new algebraic multigrid (AMG) developments in TOPS: the adaptive smoothed aggregation method (αSA) and a coarse-grid selection algorithm based on compatible relaxation (CR). The αSA method is showing promising results in initial studies for Quantum Chromodynamics (QCD) applications. The CR method has the potential to greatly improve the applicability of AMG

  1. TOP500 Supercomputers for November 2003

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-11-16

    22nd Edition of TOP500 List of World s Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 22nd edition of the TOP500 list of the worlds fastest supercomputers was released today (November 16, 2003). The Earth Simulator supercomputer retains the number one position with its Linpack benchmark performance of 35.86 Tflop/s (''teraflops'' or trillions of calculations per second). It was built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan.

  2. Understanding microelectronics a top-down approach

    CERN Document Server

    Maloberti, Franco

    2011-01-01

    The microelectronics evolution has given rise to many modern benefits but has also changed design methods and attitudes to learning. Technology advancements shifted focus from simple circuits to complex systems with major attention to high-level descriptions. The design methods moved from a bottom-up to a top-down approach. For today's students, the most beneficial approach to learning is this top-down method that demonstrates a global view of electronics before going into specifics. Franco Maloberti uses this approach to explain the fundamentals of electronics, such as processing functions,

  3. W/Top/Higgs-tagging in ATLAS

    CERN Document Server

    Norjoharuddeen, Nurfikri; The ATLAS collaboration

    2017-01-01

    We present updates of W, Top and Higgs tagging studies with the ATLAS detector. The performance of 2 variable taggers, HEPTopTagger and shower deconstruction are compared in Monte Carlo simulations. To asses the modelling of the taggers’ performance, the tagging efficiencies are measured, with the full 2015+2016 dataset, in semi-leptonic top quark pair events and the background rejections are measured in dijet and photon+jet topologies. Recent developments in subjet reconstruction techniques for high transverse momentum Higgs->bb tagging are also presented.

  4. TopN-Pareto Front Search

    Energy Technology Data Exchange (ETDEWEB)

    2016-12-21

    The JMP Add-In TopN-PFS provides an automated tool for finding layered Pareto front to identify the top N solutions from an enumerated list of candidates subject to optimizing multiple criteria. The approach constructs the N layers of Pareto fronts, and then provides a suite of graphical tools to explore the alternatives based on different prioritizations of the criteria. The tool is designed to provide a set of alternatives from which the decision-maker can select the best option for their study goals.

  5. Recent Results on Top Physics in CMS

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Top physics is a pillar of the physics programme at the LHC. It involves precision measurements, leading to constraints on standard model parameters, as well as many measurements of observables sensitive to new physics. In this seminar, an overview of measurements performed by the CMS experiment in the domain of top physics will be presented, based on pp data collected in 2011 at a center-of-mass energy of 7 TeV. The results will be compared to expectations from theory. Emphasis in will be given to more recent results and to the treatment of systematic uncertainties.

  6. Top and Electroweak Measurements at the Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Bartos, P. [Comenius U.

    2016-01-01

    In this report, we summarize the latest results of the top-quark mass and electroweak measurements from the Tevatron. Since the world combination of top-quark mass measurements was done, CDF and D0 experiments improved the precision of several results. Some of them reach the relative precition below 1% for a single measurement. From the electroweak results, we report on the WW and WZ production cross section, measurements of the weak mixing angle and indirect measurements of W boson mass. The Tevatron results of the weak mixing angle are still the most precise ones of hadron colliders.

  7. Single top quark production at LEP200?

    International Nuclear Information System (INIS)

    Boos, E.; Ishikawa, T.; Kaneko, T.; Kawabata, S.; Kurihara, Y.; Shimizu, Y.; Tanaka, H.

    1994-01-01

    A complete tree-level calculation of the reaction e + e - → e + ν e anti tb (e - anti ν e t anti b) in the electroweak standard theory in the LEP200 energy range is presented. For top quark masses in the range 130 to 190 GeV the cross sections are found to be in the order of 10 -5 to 10 -6 pb. Therefore, the number of single top quark events is expected to be negligible even with an integrated luminosity of L = 500 pb -1 . It is further demonstrated that the Weizsaecker-Williams approximation is approaching the accurate cross section calculations resonably well. (orig.)

  8. Lepton distribution in top decay: A probe of new physics and top ...

    Indian Academy of Sciences (India)

    it may become difficult to probe new physics couplings of top quark. However, if one can construct observables that are sensitive to production and decay mecha- nism independent of each other, the analysis can be greatly simplified. It has been shown that the angular distribution of the leptons from the decay of top quark is.

  9. An Efficiency Comparison of MBA Programs: Top 10 versus Non-Top 10

    Science.gov (United States)

    Hsu, Maxwell K.; James, Marcia L.; Chao, Gary H.

    2009-01-01

    The authors compared the cohort group of the top-10 MBA programs in the United States with their lower-ranking counterparts on their value-added efficiency. The findings reveal that the top-10 MBA programs in the United States are associated with statistically higher average "technical and scale efficiency" and "scale efficiency", but not with a…

  10. Determination of the top-quark mass from hadro-production of single top-quarks

    International Nuclear Information System (INIS)

    Alekhin, S.; Moch, S.; Thier, S.

    2016-08-01

    We present a new determination of the top-quark mass m_t based on the experimental data from the Tevatron and the LHC for single-top hadro-production. We use the inclusive cross sections of s- and t-channel top-quark production to extract m_t and to minimize the dependence on the strong coupling constant and the gluon distribution in the proton compared to the hadro-production of top-quark pairs. As part of our analysis we compute the next-to-next-to-leading order approximation for the s-channel cross section in perturbative QCD based on the known soft-gluon corrections and implement it in the program HatHor for the numerical evaluation of the hadronic cross section. Results for the top-quark mass are reported in the MS and in the on-shell renormalization scheme.

  11. Model uncertainties in top-quark physics

    CERN Document Server

    Seidel, Markus

    2014-01-01

    The ATLAS and CMS collaborations at the Large Hadron Collider (LHC) are studying the top quark in pp collisions at 7 and 8 TeV. Due to the large integrated luminosity, precision measurements of production cross-sections and properties are often limited by systematic uncertainties. An overview of the modeling uncertainties for simulated events is given in this report.

  12. Learning from Top-Performing Managers.

    Science.gov (United States)

    Brown, Paul L.

    2000-01-01

    Illustrates five criteria that can be used to identify the "best" managers in any organization: business results, employee attitudes, peer confirmation, upper-level manager appraisal, and customer satisfaction. Examines what top-performing managers say and do, and concludes that their thinking processes and their specific sets of skills…

  13. Taking a gamble on the top quark

    International Nuclear Information System (INIS)

    Flam, F.

    1994-01-01

    This article describes the possible discovery of the top quark at Fermilab. Evidence for its existence is now at the level of two standard deviations above background, but a solid claim for discovery will not be made until the probability is five standard deviations. That should require one more year of experimentation

  14. New Physics with Energetic Top Quarks

    CERN Document Server

    Andeen, Timothy; The ATLAS collaboration

    2018-01-01

    Many theories beyond the Standard Model predict new phenomena which decay to energetic top quarks. Searches for such new physics models are performed using the ATLAS experiment at the LHC using proton-proton collision data collected in 2015 and 2016 with a center-of-mass energy of 13 TeV. Selected recent results will be discussed.

  15. Top-Ten IT Issues: 2009

    Science.gov (United States)

    Agee, Anne Scrivener; Yang, Catherine

    2009-01-01

    This article presents the top-ten IT-related issues in terms of strategic importance to the institution, as revealed by the tenth annual EDUCAUSE Current Issues Survey. These IT-related issues include: (1) Funding IT; (2) Administrative/ERP Information Systems; (3) Security; (4) Infrastructure/Cyberinfrastructure; (5) Teaching and Learning with…

  16. Top-down modulation, emotion, and hallucination

    NARCIS (Netherlands)

    Aleman, A; Kahn, RS

    2002-01-01

    We argue that the pivotal role assigned by Northoff to the principle of top-down modulation in catatonia might successfully be applied to other symptoms of schizophrenia, for example, hallucinations. Second, we propose that Northoffs account would benefit from a more comprehensive analysis of the

  17. Top Down proteomics: Facts and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Catherman, Adam D.; Skinner, Owen S.; Kelleher, Neil L., E-mail: n-kelleher@northwestern.edu

    2014-03-21

    Highlights: • Top Down versus Bottom Up proteomics analysis. • Separations methods for Top Down proteomics. • Developments in mass spectrometry instrumentation and fragmentation. • Native mass spectrometry. - Abstract: The rise of the “Top Down” method in the field of mass spectrometry-based proteomics has ushered in a new age of promise and challenge for the characterization and identification of proteins. Injecting intact proteins into the mass spectrometer allows for better characterization of post-translational modifications and avoids several of the serious “inference” problems associated with peptide-based proteomics. However, successful implementation of a Top Down approach to endogenous or other biologically relevant samples often requires the use of one or more forms of separation prior to mass spectrometric analysis, which have only begun to mature for whole protein MS. Recent advances in instrumentation have been used in conjunction with new ion fragmentation using photons and electrons that allow for better (and often complete) protein characterization on cases simply not tractable even just a few years ago. Finally, the use of native electrospray mass spectrometry has shown great promise for the identification and characterization of whole protein complexes in the 100 kDa to 1 MDa regime, with prospects for complete compositional analysis for endogenous protein assemblies a viable goal over the coming few years.

  18. Measuring the running top-quark mass

    International Nuclear Information System (INIS)

    Langenfeld, Ulrich; Uwer, Peter

    2010-06-01

    In this contribution we discuss conceptual issues of current mass measurements performed at the Tevatron. In addition we propose an alternative method which is theoretically much cleaner and to a large extend free from the problems encountered in current measurements. In detail we discuss the direct determination of the top-quark's running mass from the cross section measurements performed at the Tevatron. (orig.)

  19. Top management motivation in global corporations

    Directory of Open Access Journals (Sweden)

    Dmytro Lukianenko

    2015-11-01

    Full Text Available The article explores economic localization, socialization and development intellectualization processes. The research is focused on the relevant problem implying formation and development of human resources at organizations as a key factor of their competitiveness. Based on generalizing modern theoretical motivational models a comprehensive analysis of the motivation system for top management of corporations within the paradigm of global management has been carried out. Special attention is paid to the phenomenon of global business personification and virtualization, as well as to the formation of new financial and nonfinancial incentives for top managers. Practices of effective incentives for the contemporary key corporate management actors have been studied. A comprehensive country-based comparative analysis of key tools for financial and non-financial corporate incentives for top managers within the system of long-term, short-term and regulatory criteria and parameters has been performed. Based on summarizing academic studies and empirical evidence of the leading multinational corporations a motivational model for top management of corporations has been grounded and suggested for practical implementation in Ukraine with the said model accounting for the corporations' basic needs, financial status and interests as well as for countryspecific and regional features.

  20. Essays on top management and corporate behavior

    NARCIS (Netherlands)

    Wu, H.T.

    2010-01-01

    Human behavior is fascinating, and there is no exception to what its influences are on the financial market. This dissertation consists of three essays that examine corporate behavior that is affected by decisions made by the top management. The first essay studies the rationale for leveraged buyout

  1. Are Female Top Managers Really Paid Less?

    NARCIS (Netherlands)

    Geiler, P.H.M.; Renneboog, L.D.R.

    2014-01-01

    Abstract: Are female top managers paid less than their male counterparts? Is the gender gap higher in male-dominated industries? What effect on pay do female non-executive directors and remuneration consultants exert? While we find no pay gap for the figure-head (CEO), there is strong pay

  2. Are female top managers really paid less?

    NARCIS (Netherlands)

    Geiler, P.H.M.; Renneboog, Luc

    2015-01-01

    We study the gender pay gap for all top managers (CEO and executive directors) of listed UK companies and find mixed evidence: female CEOs do not face a pay gap, but the other female executive directors (e.g. CFO, COO, Deputy CEO) are discriminated against (while controlling for position, tenure,

  3. Table-top diffuse optical imaging

    NARCIS (Netherlands)

    Sturgeon, K.A.; Bakker, L.P.

    2006-01-01

    This report describes the work done during a six months internshipat Philips Research for a Masters in Electronic and Electrical Engineering. An existing table-top tomography system for measuring lightin phantom breasts was restored. Updated software control and image reconstruction software was

  4. Top Tagging by Deep Learning Algorithm

    CERN Document Server

    Akil, Ali

    2015-01-01

    In this report I will show the application of a deep learning algorithm on a Monte Carlo simulation sample to test its performance in tagging hadronic decays of boosted top quarks and compare what we get with the results of the application of some other algorithms.

  5. Climate change and marine top predators

    DEFF Research Database (Denmark)

    Climate change affects all components of marine ecosystems. For endothermic top predators, i.e. seabirds and marine mammals, these impacts are often complex and mediated through trophic relationships. In this Research Topic, leading researchers attempt to identify patterns of change among seabirds...... and marine mammals, and the mechanisms through which climate change drives these changes....

  6. Neutrino Masses from Neutral Top Partners

    CERN Document Server

    Batell, Brian

    2015-01-01

    We present theories of `Natural Neutrinos' in which neutral fermionic top partner fields are simultaneously the right-handed neutrinos (RHN), linking seemingly disparate aspects of the Standard Model structure: a) The RHN top partners are responsible for the observed small neutrino masses, b) They help ameliorate the tuning in the weak scale and address the little hierarchy problem, and c) The factor of $3$ arising from $N_c$ in the top-loop Higgs mass corrections is countered by a factor $3$ from the number of vector-like generations of RHN. The RHN top partners may arise in pseudo-Nambu-Goldstone-Boson (pNGB) Higgs models such as the Twin Higgs, as well as more general Composite, Little, and Orbifold Higgs scenarios, and three simple example models are presented. This framework firmly predicts a TeV-scale seesaw, as the RHN masses are bounded to be below the TeV scale by naturalness. The generation of light neutrino masses relies on a collective breaking of lepton number, allowing for comparatively large ne...

  7. Top Down proteomics: Facts and perspectives

    International Nuclear Information System (INIS)

    Catherman, Adam D.; Skinner, Owen S.; Kelleher, Neil L.

    2014-01-01

    Highlights: • Top Down versus Bottom Up proteomics analysis. • Separations methods for Top Down proteomics. • Developments in mass spectrometry instrumentation and fragmentation. • Native mass spectrometry. - Abstract: The rise of the “Top Down” method in the field of mass spectrometry-based proteomics has ushered in a new age of promise and challenge for the characterization and identification of proteins. Injecting intact proteins into the mass spectrometer allows for better characterization of post-translational modifications and avoids several of the serious “inference” problems associated with peptide-based proteomics. However, successful implementation of a Top Down approach to endogenous or other biologically relevant samples often requires the use of one or more forms of separation prior to mass spectrometric analysis, which have only begun to mature for whole protein MS. Recent advances in instrumentation have been used in conjunction with new ion fragmentation using photons and electrons that allow for better (and often complete) protein characterization on cases simply not tractable even just a few years ago. Finally, the use of native electrospray mass spectrometry has shown great promise for the identification and characterization of whole protein complexes in the 100 kDa to 1 MDa regime, with prospects for complete compositional analysis for endogenous protein assemblies a viable goal over the coming few years

  8. CSR Position in the Top Management Team

    DEFF Research Database (Denmark)

    Strand, Robert

    Recently, a number of positions with corporate social responsibility (CSR) in the position title have been introduced to the top management teams (TMTs) of some of the world’s largest corporations. I explore this phenomenon. I revisit 10 such positions identified in a previous study to add...

  9. Top Four Trends in Student Information Systems

    Science.gov (United States)

    Weathers, Robert

    2013-01-01

    The modern student information systems (SIS) is a powerful administrative tool with robust functionality. As such, it is essential that school and district administrators consider the top trends in modern student information systems before going forward with system upgrades or new purchases. These trends, described herein, are: (1) Support for…

  10. Top Yukawa deviation in extra dimension

    International Nuclear Information System (INIS)

    Haba, Naoyuki; Oda, Kin-ya; Takahashi, Ryo

    2009-01-01

    We suggest a simple one-Higgs-doublet model living in the bulk of five-dimensional spacetime compactified on S 1 /Z 2 , in which the top Yukawa coupling can be smaller than the naive standard-model expectation, i.e. the top quark mass divided by the Higgs vacuum expectation value. If we find only single Higgs particle at the LHC and also observe the top Yukawa deviation, our scenario becomes a realistic candidate beyond the standard model. The Yukawa deviation comes from the fact that the wave function profile of the free physical Higgs field can become different from that of the vacuum expectation value, due to the presence of the brane-localized Higgs potentials. In the Brane-Localized Fermion scenario, we find sizable top Yukawa deviation, which could be checked at the LHC experiment, with a dominant Higgs production channel being the WW fusion. We also study the Bulk Fermion scenario with brane-localized Higgs potential, which resembles the Universal Extra Dimension model with a stable dark matter candidate. We show that both scenarios are consistent with the current electroweak precision measurements.

  11. Käibe kasvu TOP 100

    Index Scriptorium Estoniae

    2003-01-01

    Käibe kasvu TOP 100. 2002. a. netokäibe kasvust Eesti Ehitus OÜ, Russian Estonian Railway Services OÜ, Baltic Pulp & Paper AS-i ja Water Ser AS-i näitel. Diagrammid. Kommenteerivad Selene Rebane ja Rivo Sarapik

  12. Kinematics of electroweak single top quark production

    International Nuclear Information System (INIS)

    Lueck, Jan; Karlsruhe U., EKP

    2006-01-01

    In this thesis, the t-channel matching procedure of two single-top signal Monte Carlo samples is optimized. The s- and matched t-channel samples, generated by MadEvent, are validated by comparing to ZTOP next-to-leading-order calculations. We find good agreement for all kinematic distributions we investigate, except for softer light quark jets due to gluon radiation. Since this has only minor impact on the s-channel, the corresponding MadEvent sample performs its task as expected. For the t-channel, we can conclude that the applied matching procedure leads to a MadEvent sample that successfully describes the kinematic distributions and rates of the 2nd-b quark. However, small differences remain. The discrepancy in the p T -ordered 2nd-leading light jets is mainly due to the absence of initial state gluon splitting and initial and final state gluon radiation matrix elements in the MadEvent sample production. The subsequent PYTHIA showering of the partons is apparently inappropriate for modeling those contributions and not intended for this purpose. The proper way would be to produce all relevant NLO matrix elements and match them as proposed in reference [15]. At present, an NLO-MC-generator for single-top is in preparation [41]. Probably it will be available for future iterations of single-top analyses and will redundantize further matching procedures. We estimate the systematic uncertainty on the single-top acceptance due to the Monte Carlo modeling and find an uncertainty of about 1% on the t-channel acceptance. We obtain a negligible uncertainty well below 1% on the s-channel acceptance. These acceptance uncertainties are very well acceptable for the single-top analyses that are currently under way. A sensitivity study of the simultaneous cross section measurement of the s- and t-channel single-top production modes is conducted. For this purpose, only statistical uncertainties are included. For a future integrated luminosity of 1 fb -1 , we expect to obtain an s

  13. Top-tagging at the energy frontier

    Science.gov (United States)

    Han, Zhenyu; Son, Minho; Tweedie, Brock

    2018-02-01

    At proposed future hadron colliders and in the coming years at the LHC, top quarks will be produced at genuinely multi-TeV energies. Top-tagging at such high energies forces us to confront several new issues in terms of detector capabilities and jet physics. Here, we explore these issues in the context of some simple JHU/CMS-type declustering algorithms and the N -subjettiness jet-shape variable τ32. We first highlight the complementarity between the two tagging approaches at particle level with respect to discriminating top-jets against gluons and quarks, using multivariate optimization scans. We then introduce a basic fast detector simulation, including electromagnetic calorimeter showering patterns determined from GEANT. We consider a number of tricks for processing the fast detector output back to an approximate particle-level picture. Re-optimizing the tagger parameters, we demonstrate that the inevitable losses in discrimination power at very high energies can typically be ameliorated. For example, percent-scale mistag rates might be maintained even in extreme cases where an entire top decay would sit inside of one hadronic calorimeter cell and tracking information is completely absent. We then study three novel physics effects that will come up in the multi-TeV energy regime: gluon radiation off of boosted top quarks, mistags originating from g →t t ¯ , and mistags originating from q →(W /Z )q collinear electroweak splittings with subsequent hadronic decays. The first effect, while nominally a nuisance, can actually be harnessed to slightly improve discrimination against gluons. The second effect can lead to effective O (1 ) enhancements of gluon mistag rates for tight working points. And the third effect, while conceptually interesting, we show to be of highly subleading importance at all energies.

  14. Top-quark mass and top-quark pole mass measurements with the ATLAS detector

    CERN Document Server

    Barillari, Teresa; The ATLAS collaboration

    2017-01-01

    Results of top-quark mass measurements in the di-lepton and in the all-jets top-antitop decay channels with the ATLAS detector are presented. The measurements are obtained using proton--proton collisions at a centre-of-mass energy \\sqrt{s} = 8 TeV at the CERN Large Hadron Collider. The data set used corresponds to an integrated luminosity of 20.2 fb-1. The top-quark mass in the di-lepton channel is measured to be 172.99 +/-0.41 (stat.) +/- 0.74 (syst.) GeV. In the all-jets analysis the top-quark mass is measured to be 173.72 +/- 0.55 (stat.)+/- 1.01 (syst.) GeV. In addition, the top-quark pole mass is determined from inclusive cross-section measurements in the top-antitop di-lepton decay channel with the ATLAS detector. The measurements are obtained using data at \\sqrt{s} = 7 TeV and \\sqrt{s} =8 TeV corresponding to an integrated luminosity of 4.6 fb-1 and 20.2 fb-1 respectively. The top-quark pole mass is measured to be 172.9^{+2.5}_{-2.6} GeV.

  15. ATLAS + CMS top production and properties: Run 1 legacy

    CERN Document Server

    AUTHOR|(SzGeCERN)641905; The ATLAS collaboration

    2015-01-01

    The large Run 1 data sample of top-quark events collected at the Large Hadron Collider allows a variety of measurements to analyse the production and properties of the top quark. Measurements of top-quark production cross sections and top-quark properties in proton-proton collisions with the ATLAS and CMS detectors at the LHC are presented.

  16. Beyond Standard Model searches with top quarks at ATLAS

    International Nuclear Information System (INIS)

    Chevalier, F.

    2008-01-01

    At the Lhc, the top quark is expected to provide a huge and clean signal. With about eight millions of expected top pairs and three millions of single top events produced per year in the low luminosity runs, and with a low level of backgrounds, the Lhc will open a new opportunity for precision measurements of the top quark properties and for exotic topology searches involving top quarks. As the ATLAS discovery potential on new physics with top quarks is being assessed with many analyses, this paper focuses on two particular topics: heavy neutral resonance and charged Higgs boson searches with top quarks. The analyses and the ATLAS expectations are described.

  17. Measurement of top quark polarisation in t-channel single top quark production

    OpenAIRE

    CMS Collaboration

    2015-01-01

    Journal of High Energy Physics 2016.4 (2016): 073 reproduced by permission of Scuola Internazionale Superiore di Studi Avanzati (SISSA) Artículo escrito por un elevado número de autores, sólo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiera, y los autores pertenecientes a la UAM A first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based o...

  18. Studies on top-quark Monte Carlo modelling for Top2016

    CERN Document Server

    The ATLAS collaboration

    2016-01-01

    This note summarises recent studies on Monte Carlo simulation setups of top-quark pair production used by the ATLAS experiment and presents a new method to deal with interference effects for the $Wt$ single-top-quark production which is compared against previous techniques. The main focus for the top-quark pair production is on the improvement of the modelling of the Powheg generator interfaced to the Pythia8 and Herwig7 shower generators. The studies are done using unfolded data at centre-of-mass energies of 7, 8, and 13 TeV.

  19. Top asymmetry and the search for a light hadronic resonance in association with single top

    CERN Document Server

    Jung, Sunghoon; Wells, James D

    2011-01-01

    The exchange of a light $t$-channel flavor-changing gauge boson, $\\Vp$, with mass $\\sim m_{top}$ remains a leading explanation for the anomalous forward backward asymmetry in top quark production at the Tevatron. Unlike other ideas, including heavier $t$-channel mediators, the light $\\Vp$ model is not easily seen in the $\\mtt$ distribution. We advocate a more promising strategy. While current analyses at hadron colliders may not be sensitive, we propose searching for a $jj$ resonance in association with single top that may allow discovery in existing data. Deviations in the lepton charge asymmetry in this sample should also be present.

  20. Top quark pair production at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Baernreuther, Peter

    2012-06-28

    One of the most interesting and manifold processes in the Standard Model of elementary particle physics is the top quark pair production. It enabled the discovery of the top quark at the Tevatron in 1995 and the determination of many of its properties. By means of a precise measurement and calculation of the cross section of top quark pair production it is possible to extract the top quark mass. Improvements in the gluon parton distribution functions (important for the Higgs boson production) or improvements in the prediction of the Higgs mass are also closely linked with the top quark pair production. Furthermore, the production process plays an important role in the discovery of new physics. On the one hand the top quark pair decays form the largest part of the background in many BSM models, on the other hand BSM physics can be detected directly in the decay process by investigating the charge symmetry or the invariant mass spectrum. At the LHC it will be possible for the first time to produce a large amount of top quarks; thereby the statistical errors of the observables will be strongly reduced. The enormous increase in the production rate has two reasons. On the one hand, the acceleration energy of the LHC (14 TeV and 7 TeV) is significantly greater than that of the Tevatron (1.96 Tev). This leads to an increase of the cross section by a factor of 100 ({proportional_to}7.3 pb at the Tevatron to {proportional_to}800 pb at 14 TeV LHC). On the other hand, the luminosity of the LHC outperforms the Tevatron by a factor of 10-100. The reduced experimental errors for the observables demand an improvement of the theoretical error. The experimental accuracy of the LHC and the great relevance of the process led to an intensive activity of different research groups in order to improve the calculation of the cross section of top quark pair production. This work presents for the first time a complete numerical result for the full NNLO correction for the top quark pair

  1. Top quark pair production at the LHC

    International Nuclear Information System (INIS)

    Baernreuther, Peter

    2012-01-01

    One of the most interesting and manifold processes in the Standard Model of elementary particle physics is the top quark pair production. It enabled the discovery of the top quark at the Tevatron in 1995 and the determination of many of its properties. By means of a precise measurement and calculation of the cross section of top quark pair production it is possible to extract the top quark mass. Improvements in the gluon parton distribution functions (important for the Higgs boson production) or improvements in the prediction of the Higgs mass are also closely linked with the top quark pair production. Furthermore, the production process plays an important role in the discovery of new physics. On the one hand the top quark pair decays form the largest part of the background in many BSM models, on the other hand BSM physics can be detected directly in the decay process by investigating the charge symmetry or the invariant mass spectrum. At the LHC it will be possible for the first time to produce a large amount of top quarks; thereby the statistical errors of the observables will be strongly reduced. The enormous increase in the production rate has two reasons. On the one hand, the acceleration energy of the LHC (14 TeV and 7 TeV) is significantly greater than that of the Tevatron (1.96 Tev). This leads to an increase of the cross section by a factor of 100 (∝7.3 pb at the Tevatron to ∝800 pb at 14 TeV LHC). On the other hand, the luminosity of the LHC outperforms the Tevatron by a factor of 10-100. The reduced experimental errors for the observables demand an improvement of the theoretical error. The experimental accuracy of the LHC and the great relevance of the process led to an intensive activity of different research groups in order to improve the calculation of the cross section of top quark pair production. This work presents for the first time a complete numerical result for the full NNLO correction for the top quark pair production in quark anti

  2. Opportunities with top quarks at future circular colliders

    CERN Document Server

    Fuks, Benjamin

    2014-01-01

    We describe various studies relevant for top physics at future circular collider projects currently under discussion. We show how highly-massive top-antitop systems produced in proton-proton collisions at a center-of-mass energy of 100 TeV could be observed and employed for constraining top dipole moments, investigate the reach of future proton-proton and electron-positron machines to top flavor-changing neutral interactions, and discuss top parton densities.

  3. Measurement of the Mass Difference Between Top and Anti-top Quarks at CDF

    CERN Document Server

    Aaltonen, T.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Bae, T.; Barbaro-Galtieri, A.; Barnes, V.E.; Barnett, B.A.; Barria, P.; Bartos, P.; Bauce, M.; Bedeschi, F.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Bisello, D.; Bizjak, I.; Bland, K.R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brigliadori, L.; Bromberg, C.; Brucken, E.; Budagov, J.; Budd, H.S.; Burkett, K.; Busetto, G.; Bussey, P.; Buzatu, A.; Calamba, A.; Calancha, C.; Camarda, S.; Campanelli, M.; Campbell, M.; Canelli, F.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Carron, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chen, Y.C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Chlebana, F.; Cho, K.; Chokheli, D.; Chung, W.H.; Chung, Y.S.; Ciocci, M.A.; Clark, A.; Clarke, C.; Compostella, G.; Convery, M.E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C.A.; Cox, D.J.; Crescioli, F.; Cuevas, J.; Culbertson, R.; Dagenhart, D.; d'Ascenzo, N.; Datta, M.; de Barbaro, P.; Dell'Orso, M.; Demortier, L.; Deninno, M.; Devoto, F.; d'Errico, M.; Di Canto, A.; Di Ruzza, B.; Dittmann, J.R.; D'Onofrio, M.; Donati, S.; Dong, P.; Dorigo, M.; Dorigo, T.; Ebina, K.; Elagin, A.; Eppig, A.; Erbacher, R.; Errede, S.; Ershaidat, N.; Eusebi, R.; Farrington, S.; Feindt, M.; Fernandez, J.P.; Field, R.; Flanagan, G.; Forrest, R.; Frank, M.J.; Franklin, M.; Freeman, J.C.; Funakoshi, Y.; Furic, I.; Gallinaro, M.; Garcia, J.E.; Garfinkel, A.F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Giannetti, P.; Gibson, K.; Ginsburg, C.M.; Giokaris, N.; Giromini, P.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Goldschmidt, N.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; Gonzalez, O.; Gorelov, I.; Goshaw, A.T.; Goulianos, K.; Grinstein, S.; Grosso-Pilcher, C.; Group, R.C.; Guimaraes da Costa, J.; Hahn, S.R.; Halkiadakis, E.; Hamaguchi, A.; Han, J.Y.; Happacher, F.; Hara, K.; Hare, D.; Hare, M.; Harr, R.F.; Hatakeyama, K.; Hays, C.; Heck, M.; Heinrich, J.; Herndon, M.; Hewamanage, S.; Hocker, A.; Hopkins, W.; Horn, D.; Hou, S.; Hughes, R.E.; Hurwitz, M.; Husemann, U.; Hussain, N.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E.J.; Jindariani, S.; Jones, M.; Joo, K.K.; Jun, S.Y.; Junk, T.R.; Kamon, T.; Karchin, P.E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Khotilovich, V.; Kilminster, B.; Kim, D.H.; Kim, H.S.; Kim, J.E.; Kim, M.J.; Kim, S.B.; Kim, S.H.; Kim, Y.K.; Kim, Y.J.; Kimura, N.; Kirby, M.; Klimenko, S.; Knoepfel, K.; Kondo, K.; Kong, D.J.; Konigsberg, J.; Kotwal, A.V.; Kreps, M.; Kroll, J.; Krop, D.; Kruse, M.; Krutelyov, V.; Kuhr, T.; Kurata, M.; Kwang, S.; Laasanen, A.T.; Lami, S.; Lammel, S.; Lancaster, M.; Lander, R.L.; Lannon, K.; Lath, A.; Latino, G.; LeCompte, T.; Lee, E.; Lee, H.S.; Lee, J.S.; Lee, S.W.; Leo, S.; Leone, S.; Lewis, J.D.; Limosani, A.; Lin, C.J.; Lindgren, M.; Lipeles, E.; Lister, A.; Litvintsev, D.O.; Liu, C.; Liu, H.; Liu, Q.; Liu, T.; Lockwitz, S.; Loginov, A.; Lucchesi, D.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maeshima, K.; Maestro, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, C.; Martinez, M.; Mastrandrea, P.; Matera, K.; Mattson, M.E.; Mazzacane, A.; Mazzanti, P.; McFarland, K.S.; McIntyre, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Mondragon, M.N.; Moon, C.S.; Moore, R.; Morello, M.J.; Morlock, J.; Movilla Fernandez, P.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Neubauer, M.S.; Nielsen, J.; Nodulman, L.; Noh, S.Y.; Norniella, O.; Oakes, L.; Oh, S.H.; Oh, Y.D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagan Griso, S.; Pagliarone, C.; Palencia, E.; Papadimitriou, V.; Paramonov, A.A.; Patrick, J.; Pauletta, G.; Paulini, M.; Paus, C.; Pellett, D.E.; Penzo, A.; Phillips, T.J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Poprocki, S.; Potamianos, K.; Prokoshin, F.; Pranko, A.; Ptohos, F.; Punzi, G.; Rahaman, A.; Ramakrishnan, V.; Ranjan, N.; Redondo, I.; Renton, P.; Rescigno, M.; Riddick, T.; Rimondi, F.; Ristori, L.; Robson, A.; Rodrigo, T.; Rodriguez, T.; Rogers, E.; Rolli, S.; Roser, R.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Safonov, A.; Sakumoto, W.K.; Sakurai, Y.; Santi, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, A.; Schmidt, E.E.; Schwarz, T.; Scodellaro, L.; Scribano, A.; Scuri, F.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Shalhout, S.Z.; Shears, T.; Shepard, P.F.; Shimojima, M.; Shochet, M.; Shreyber-Tecker, I.; Simonenko, A.; Sinervo, P.; Sliwa, K.; Smith, J.R.; Snider, F.D.; Soha, A.; Sorin, V.; Song, H.; Squillacioti, P.; Stancari, M.; St. Denis, R.; Stelzer, B.; Stelzer-Chilton, O.; Stentz, D.; Strologas, J.; Strycker, G.L.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P.K.; Thom, J.; Thome, J.; Thompson, G.A.; Thomson, E.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Ukegawa, F.; Uozumi, S.; Varganov, A.; Vazquez, F.; Velev, G.; Vellidis, C.; Vidal, M.; Vila, I.; Vilar, R.; Vizan, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wagner, R.L.; Wakisaka, T.; Wallny, R.; Wang, S.M.; Warburton, A.; Waters, D.; Wester, W.C., III; Whiteson, D.; Wicklund, A.B.; Wicklund, E.; Wilbur, S.; Wick, F.; Williams, H.H.; Wilson, J.S.; Wilson, P.; Winer, B.L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamato, D.; Yang, T.; Yang, U.K.; Yang, Y.C.; Yao, W.M.; Yeh, G.P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G.B.; Yu, I.; Yu, S.S.; Yun, J.C.; Zanetti, A.; Zeng, Y.; Zhou, C.; Zucchelli, S.

    2013-03-18

    We present a measurement of the mass difference between top ($t$) and anti-top ($\\bar{t}$) quarks using $t\\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-by-event the mass difference to construct templates for top-quark signal events and background events. The resulting mass difference distribution of data compared to signal and background templates using a likelihood fit yields $\\Delta M_{top} = {M}_{t} - {M}_{\\bar{t}} = -1.95 $pm$ 1.11 (stat) $pm$ 0.59 (syst)$ and is in agreement with the standard model prediction of no mass difference.

  4. PREFACE: 5th International Workshop on Top Quark Physics (TOP2012)

    Science.gov (United States)

    Salamanna, G.; Boisvert, V.; Cerrito, L.; Khan, A.; Moretti, S.; Owen, M.; Schwanenberger, C.

    2013-07-01

    The 5th International Workshop on Top Quark Physics (TOP 2012) took place in Winchester, UK, from the 16-21 September. It gathered students as well as people active in the top quark sector and provided a framework to highlight the newest results and matters related to top quark physics. Discovered in 1995, the top quark is the sixth and heaviest of all quarks, and it is the only one with a lifetime short enough to be observed 'naked'. This makes it an important testing ground in the search for new physics. In fact, the fact of its mass being so much larger than the other quarks, hints at its special role in the Higgs mechanism. For the same reason, in many models of New Physics, new heavy resonances are expected to couple mostly with top quarks. Even if no new particles are observed, the direct correlation between its angular momentum and that of its detectable decay products allows us to probe indirectly New Physics in action when top quarks are created. In this edition of the TOP conference series, for the first time, the agenda was equally balanced between 'traditional' measurements and the now vast number of searches for physics BSM in the top quark sector, thanks mostly to the amount of data collected at the LHC in its Run I. New results were presented by both the Tevatron and the LHC collaborations: improved ttbar and single top cross-section measurements, refined techniques to measure the top quark mass and a large number of results on properties such as spin correlation and W boson polarization in top quark decays were shown. More technical discussions on the experimental issues, both from the detector and the simulation side also took place, drawing together experimentalists and theorists. Reviews of the latest results on ttbar asymmetry both from CDF and D0 and from ATLAS and CMS were shown, and theorists active in the field made some interesting points on this hot topic. Additionally, results on the search for fourth generation fermions and new

  5. TOP500 Supercomputers for June 2003

    Energy Technology Data Exchange (ETDEWEB)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-06-23

    21st Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 21st edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2003). The Earth Simulator supercomputer built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan, with its Linpack benchmark performance of 35.86 Tflop/s (teraflops or trillions of calculations per second), retains the number one position. The number 2 position is held by the re-measured ASCI Q system at Los Alamos National Laboratory. With 13.88 Tflop/s, it is the second system ever to exceed the 10 Tflop/smark. ASCIQ was built by Hewlett-Packard and is based on the AlphaServerSC computer system.

  6. Top quark kinematics and mass determination

    International Nuclear Information System (INIS)

    Williams, H.H.

    1994-10-01

    An analysis is presented of 10 W + ≥ 3 jet events, each with evidence for the presence of a b quark, that were recently observed by the CDF collaboration. Seven of these events include a fourth jet and can be explicitly reconstructed as t bar t production. The best estimate of the top quark mass is M t = 174 ± 10 -12 +13 GeV/c 2 . A study has also been performed to see if the kinematical properties of events with W + ≥ 3 jets gives evidence for top production. An excess of events with large jet energies, compared to that expected from direct production of W + ≥ 3 jets, is observed. A large fraction of these events also contain a b-quark and a fourth jet

  7. Signs of tops from highly mixed stops

    Energy Technology Data Exchange (ETDEWEB)

    Backović, Mihailo [Center for Cosmology, Particle Physics and Phenomenology - CP3,Universite Catholique de Louvain, Louvain-la-neuve (Belgium); Mariotti, Alberto [Theoretische Natuurkunde and IIHE/ELEM, Vrije Universiteit Brussel,and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium); Spannowsky, Michael [Institute for Particle Physics Phenomenology, Department of Physics,Durham University, Durham DH1 3LE (United Kingdom)

    2015-06-17

    Supersymmetric extensions of the Standard Model with highly mixed squark flavours beyond minimal flavour violation provide interesting scenarios of new physics, which have so far received limited attention. We propose a calculable realization of such scenarios in models of gauge mediation augmented with an extra interaction between the messengers and the up type squark. We compute the supersymmetric spectrum and analyze the flavour physics constraints on such models. In a simplified model approach, we show that scenarios with maximal squark flavour mixing result in interesting phenomenological signatures at the LHC. We show that the model can be probed up to masses of m{sub ũ}≲950 GeV in the single-top event topology at LHC14 with as little as 300 fb{sup −1}. The most distinctive signature of highly mixed scenarios, the same sign positive charge di-top, can be also probed to comparable squark masses at high luminosity LHC14.

  8. The heavy top quark and supersymmetry

    Energy Technology Data Exchange (ETDEWEB)

    Hall, L.J. [Lawrence Berkeley Lab., CA (United States)]|[Univ. of California, Berkeley, CA (United States)

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  9. Three-body Supersymmetric Top Decays

    CERN Document Server

    Belyaev, A; Lola, S; Belyaev, Alexander; Ellis, John; Lola, Smaragda

    2000-01-01

    We discuss three-body supersymmetric top decays, in schemes both with andwithout R-parity conservation, assuming that sfermion masses are larger thanm_t. We find that MSSM top decays into chargino/neutralino pairs have a strongkinematic suppression in the region of the supersymmetric parameter spaceconsistent with the LEP limits, with a decay width =< 10^{-5} GeV. MSSM topdecays into neutralino pairs have less kinematical suppression, but require aflavour-changing vertex, and are likely to have a smaller rate. On the otherhand, R-violating decays to single charginos, neutralinos and conventionalfermions can be larger for values of the R-violating couplings still permittedby other upper limits. The cascade decays of the charginos and neutralinos maylead to spectacular signals with explicit lepton-number violation, such aslike-sign lepton events.

  10. Populating the Landscape: a top down approach

    CERN Document Server

    Hawking, Stephen William; Hertog, Thomas

    2006-01-01

    We put forward a framework for cosmology that combines the string landscape with no boundary initial conditions. In this framework, amplitudes for alternative histories for the universe are calculated with final boundary conditions only. This leads to a top down approach to cosmology, in which the histories of the universe depend on the precise question asked. We study the observational consequences of no boundary initial conditions on the landscape, and outline a scheme to test the theory. This is illustrated in a simple model landscape that admits several alternative inflationary histories for the universe. Only a few of the possible vacua in the landscape will be populated. We also discuss in what respect the top down approach differs from other approaches to cosmology in the string landscape, like eternal inflation.

  11. Probing New Physics with Single Top + X

    International Nuclear Information System (INIS)

    Walker, D.G.E.; Yu, Jiang-Hao; Yuan, C.P.

    2012-01-01

    We investigate single top production in association with a variety of Standard Model final states with a focus on the early LHC run. Here X can be jets, large missing transverse momentum and/or electroweak gauge bosons. For this review, we focus on searches for new W' gauge bosons and heavy B' quarks. A general survey of the possible new physics with associated single top production can be found in literature. In essence, the channel probes a variety of new physics, is intricately tied to the new physics at the TeV scale and is essential for maximizing the potential of the early LHC for new physics. We showed TeV W' bosons and B' heavy quarks are easily accessible during the early LHC running

  12. The heavy top quark and supersymmetry

    International Nuclear Information System (INIS)

    Hall, L.J.; Univ. of California, Berkeley, CA

    1996-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the standard model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the standard model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed

  13. The heavy top quark and supersymmetry

    International Nuclear Information System (INIS)

    Hall, L.J.

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed

  14. Computer networking a top-down approach

    CERN Document Server

    Kurose, James

    2017-01-01

    Unique among computer networking texts, the Seventh Edition of the popular Computer Networking: A Top Down Approach builds on the author’s long tradition of teaching this complex subject through a layered approach in a “top-down manner.” The text works its way from the application layer down toward the physical layer, motivating readers by exposing them to important concepts early in their study of networking. Focusing on the Internet and the fundamentally important issues of networking, this text provides an excellent foundation for readers interested in computer science and electrical engineering, without requiring extensive knowledge of programming or mathematics. The Seventh Edition has been updated to reflect the most important and exciting recent advances in networking.

  15. Entanglement entropy in top-down models

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Peter A.R.; Taylor, Marika [Mathematical Sciences and STAG Research Centre, University of Southampton,Highfield, Southampton, SO17 1BJ (United Kingdom)

    2016-08-26

    We explore holographic entanglement entropy in ten-dimensional supergravity solutions. It has been proposed that entanglement entropy can be computed in such top-down models using minimal surfaces which asymptotically wrap the compact part of the geometry. We show explicitly in a wide range of examples that the holographic entanglement entropy thus computed agrees with the entanglement entropy computed using the Ryu-Takayanagi formula from the lower-dimensional Einstein metric obtained from reduction over the compact space. Our examples include not only consistent truncations but also cases in which no consistent truncation exists and Kaluza-Klein holography is used to identify the lower-dimensional Einstein metric. We then give a general proof, based on the Lewkowycz-Maldacena approach, of the top-down entanglement entropy formula.

  16. Entanglement entropy in top-down models

    International Nuclear Information System (INIS)

    Jones, Peter A.R.; Taylor, Marika

    2016-01-01

    We explore holographic entanglement entropy in ten-dimensional supergravity solutions. It has been proposed that entanglement entropy can be computed in such top-down models using minimal surfaces which asymptotically wrap the compact part of the geometry. We show explicitly in a wide range of examples that the holographic entanglement entropy thus computed agrees with the entanglement entropy computed using the Ryu-Takayanagi formula from the lower-dimensional Einstein metric obtained from reduction over the compact space. Our examples include not only consistent truncations but also cases in which no consistent truncation exists and Kaluza-Klein holography is used to identify the lower-dimensional Einstein metric. We then give a general proof, based on the Lewkowycz-Maldacena approach, of the top-down entanglement entropy formula.

  17. A Search for new particles decaying into top quark anti-top quark pairs

    Energy Technology Data Exchange (ETDEWEB)

    Cassada, Josh Aaron [Univ. of Rochester, NY (United States)

    2000-01-01

    We use 106 pb-1 of data collected with the Collider Detector at Fermilab to search for narrow-width particles decaying to a top and an anti-top quark. We measure the t$\\bar{t}$ invariant mass distribution by requiring that either t or $\\bar{t}$ decays semileptonically to an electron or muon and the other decays hadronically.

  18. The top 50 cited articles on chordomas.

    Science.gov (United States)

    Ikpeze, Tochukwu; Mesfin, Addisu

    2018-03-01

    Chordomas are rare malignant primary tumors of the spine. In the mobile spine and sacrum an en-bloc resection is associated with decreased rates of recurrence. Our objective was to identify the top cited articles in chordoma research and to further analyze characteristics of these articles. In March 2017, we used ISI Web of Science (v5.11, Thomas Reuter, Philadelphia, Pennsylvania, USA) to search for the following key word: "chordoma". Articles were searched from 1900 to 2017. Articles were ranked based on number of citations. The results were evaluated to determine articles most clinically relevant to the management of chordomas. The top 50 articles that met the search criteria were further characterized on the basis of: title, author, citation density, journal of publication, year (and decade) of publication, institution and country of origin and paper topic. A total of 1,043 articles matched the search criteria. The most influential 50 articles were cited 65 to 290 times. The articles were published between 1926 and 2012, and all articles were published in English. Thirty-three publications (66%) originated from the United States and seven (14%) from Italy. Cancer accounted for the most frequent (n=9) destination journal followed by Journal of Bone and Joint Surgery (n=4). A total of 41 institutions contributed to the top 50 articles. The most common article types were: clinical 44% (n=22), papers that combined clinical and pathology findings 18% (n=9) and basic science research 14% (n=7). The top 50 cited articles on chordomas are predominantly clinical papers, arising from the United States and most frequently published in Cancer and Journal of Bone and Joint Surgery .

  19. Boosted dibosons from mixed heavy top squarks

    Science.gov (United States)

    Ghosh, Diptimoy

    2013-12-01

    The lighter mass eigenstate (t˜1) of the two top squarks, the scalar superpartners of the top quark, is extremely difficult to discover if it is almost degenerate with the lightest neutralino (χ˜10), the lightest stable supersymmetric particle in the R-parity conserving supersymmetry. The current experimental bound on t˜1 mass in this scenario stands only around 200 GeV. For such a light t˜1, the heavier top squark (t˜2) can also be around the TeV scale. Moreover, the high value of the Higgs (h) mass prefers the left- and right-handed top squarks to be highly mixed, allowing the possibility of a considerable branching ratio for t˜2→t˜1h and t˜2→t˜1Z. In this paper, we explore the above possibility together with the pair production of t˜2 t˜2*, giving rise to the spectacular diboson+missing transverse energy final state. For an approximately 1 TeV t˜2 and a few hundred GeV t˜1 the final state particles can be moderately boosted, which encourages us to propose a novel search strategy employing the jet substructure technique to tag the boosted h and Z. The reconstruction of the h and Z momenta also allows us to construct the stransverse mass MT2, providing an additional efficient handle to fight the backgrounds. We show that a 4-5σ signal can be observed at the 14 TeV LHC for ˜1TeV t˜2 with 100fb-1 integrated luminosity.

  20. Rare top quark decays in extended models

    International Nuclear Information System (INIS)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2006-01-01

    Flavor changing neutral currents (FCNC) decays t → H0 + c, t → Z + c, and H0 → t + c-bar are discussed in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions where FCNC decays may take place at tree-level and are only suppressed by the mixing between ordinary top and charm quarks, which is poorly constraint by current experimental values. The non-manifest case is also briefly discussed

  1. Controlling - a useful tool for top management

    OpenAIRE

    Grigorut Cornel; Grigorut Lavinia-Maria

    2012-01-01

    Controlling outlines business policy of an enterprise, the term derives from an English word - to control - control, managing, setting rules and directing. The controller's duty is to serve the management as an economic navigator and to ensure that the company's ship reaches its profit targets. The controller has to be sure that he or she has an organizational support from the top management. It was suggested to establish the controlling department which can be applied to the systems of econo...

  2. Modeling Electrolytically Top-Gated Graphene

    Directory of Open Access Journals (Sweden)

    Mišković ZL

    2010-01-01

    Full Text Available Abstract We investigate doping of a single-layer graphene in the presence of electrolytic top gating. The interfacial phenomenon is modeled using a modified Poisson–Boltzmann equation for an aqueous solution of simple salt. We demonstrate both the sensitivity of graphene’s doping levels to the salt concentration and the importance of quantum capacitance that arises due to the smallness of the Debye screening length in the electrolyte.

  3. Charm, Beauty and Top at HERA

    International Nuclear Information System (INIS)

    Behnke, O.; Geiser, A.; Lisovyi, M.

    2015-06-01

    Results on open charm and beauty production and on the search for top production in high-energy electron-proton collisions at HERA are reviewed. This includes a discussion of relevant theoretical aspects, a summary of the available measurements and measurement techniques, and their impact on improved understanding of QCD and its parameters, such as parton density functions and charm- and beauty-quark masses. The impact of these results on measurements at the LHC and elsewhere is also addressed.

  4. INNOVATIVE MARKETING STRATEGIES IN TOP MOST COMPANIES

    OpenAIRE

    Sonia*

    2018-01-01

    This Research Study looks at various innovative marketing strategies used by our top most companies .Marketing strategies is a long term, forward looking approach to planning with the fundamental goal achieving a sustainable competitive advantage. Overall approach of this paper is to create a link between growth rate of companies and new marketing strategies. Good marketing is no accident, It is both an art and a science and it results from careful planning and execution using state-of-the-ar...

  5. Anatomy of top 100 upstream players

    International Nuclear Information System (INIS)

    Burk, V.A.

    1992-01-01

    A brief review is given of a recent survey of the top one hundred upstream oil and gas companies which file financial data with the US Securities and Exchange Commission. The analysis indicates the increasing globalisation of the industry with exploration and development spending increasing dramatically outside the US. To survive, companies must operate as efficient low cost finders and producers of oil and gas and anticipate and meet changing market demands quickly. (UK)

  6. Top quark decays in extended models

    International Nuclear Information System (INIS)

    Gaitan, R.; Cabral-Rosetti, L.G.

    2011-01-01

    We evaluate the FCNC decays t → H 0 + c at tree-level and t → γ + c at one-loop level in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; in the first case, FCNC decays occurs at tree-level and they are only suppressed by the mixing between ordinary top and charm quarks. (author)

  7. Wear Analysis of Top Piston Ring to Reduce Top Ring Reversal Bore Wear

    Directory of Open Access Journals (Sweden)

    P. Ilanthirayan

    2017-12-01

    Full Text Available The piston rings are the most important part in engine which controls the lubricating oil consumption and blowby of the gases. The lubricating film of oil is provided to seal of gases towards crankcase and also to give smooth friction free translatory motion between rings and liner. Of the three rings present top ring is more crucial as it does the main work of restricting gases downwards the crankcase. Boundary lubrication is present at the Top dead centre (TDC and Bottom dead centre (BDC of the liner surface. In addition to this, top ring is exposed to high temperature gases which makes the oil present near the top ring to get evaporated and decreasing its viscosity, making metal-metal contact most of the time. Due to this at TDC, excess wear happens on the liner which is termed as Top ring reversal bore wear. The wear rate depends upon many parameters such as lubrication condition, viscosity index, contact type, normal forces acting on ring, geometry of ring face, surface roughness, material property. The present work explores the wear depth for different geometries of barrel ring using Finite Element model with the help of Archard wear law and the same is validated through experimentation. The study reveals that Asymmetric barrel rings have less contact pressure which in turn reduces the wear at Top dead centre.

  8. Status of the DO top search

    International Nuclear Information System (INIS)

    Li-Demarteau, Q.

    1994-09-01

    Preliminary new results on the top quark search with the DO experiment in bar pp collisions at √s = 1.8 TeV for an integrated luminosity of 15.2 ± 1.8 pb -1 are reported. In this new analysis, which is optimized for high mass top search, a total of seven candidate events in the electron and muon dilepton decay channels (t bar t → eμ, ee and μμ), single lepton decay channels (t bar t → e + jets and t bar t → μ + jets) without b tagging and single electron decay channel (t bar t → e + jets) with b tagging have been observed. The estimated background is 4.7 ± 1.0 events. If we assume the top quark has a mass of 180 GeV/c 2 , a t bar t production cross section of 3.2 ± 3.9 pb with upper limit of 13 pb at 95% C.L. is obtained

  9. Observation of Single Top Quark Production

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Cecilia E.; /Illinois U., Chicago

    2009-09-01

    The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at {radical}s = 1.96 Tev using 2.3 fb{sup -1} of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} {yields} tb + X, tqb + X is 3.94 {+-} 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10{sup -7}, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 {+-} 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.

  10. Dynamics of a cliff top dune

    Science.gov (United States)

    Rasmussen, K. R.

    2012-12-01

    Morphological changes during more than 100 years have been investigated for a cliff-top dune complex at Rubjerg at the Danish North Sea coast. Here the lower 50 m of the cliff front is composed of Pleistocene steeply inclined floes of silt and clay with coarse sand in between which gives it a saw-tooth appearance. On top of this the dunes are found for several kilometres along the coastline. Due to erosion by the North Sea the cliff has retreated about 120 m between approximately 1880 and 1970 as indicated from two national surveys, and recent GPS-surveys indicate that erosion is continuing at a similar rate. Nevertheless the cliff top dune complex has survived, but its morphology has undergone some changed. The old maps indicate that around 1880 the dune complex was composed of several up to about 20 m high dunes streamlined in the East-West direction which is parallel to the prevailing wind direction. When protective planting started during the first half of the 20th Century the cliff top dunes gradually merged together forming a narrow, tall ridge parallel to the shore line with the highest part reaching about 90 m near 1970. In 1993 the highest points along the ridge was almost 95 m high, but then the protective planting was considerably reduced and recent annual GPS-surveys indicate that the dunes respond quickly to this by changing their morphology towards the original appearance. It is remarkable that despite the mass wasting caused by the constant erosion of the cliff front the dunes have remained more or less intact. Theoretical studies of hill flow indicate given the proper geometry of the cliff then suspension of even coarse grains can be a very effective agent for carrying sand from the exposed parts of the cliff front to and beyond the cliff-top. Mostly the sand grains are deposited within some hundred meters downwind of the cliff dune while silt is often carried more than 10 km inland. Field observations indicate that where the dislodged floes and

  11. Highlights of top quark cross-section measurements at ATLAS

    CERN Document Server

    Bielski, Rafal; The ATLAS collaboration

    2017-01-01

    Measurements of inclusive and differential top-quark production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at a center of mass energy of 8 TeV and 13 TeV. The inclusive measurements of top quark pair and single top quark production reach high precision and are compared to the best available theoretical calculations. Differential measurements of the kinematic properties of top quark events are also discussed. These measurements, including results using boosted top quarks, probe our understanding of top quark production in the TeV regime.

  12. Deep-learning top taggers or the end of QCD?

    Energy Technology Data Exchange (ETDEWEB)

    Kasieczka, Gregor [Institute for Particle Physics, ETH Zürich,Otto-Stern-Weg 5, Zürich (Switzerland); Plehn, Tilman [Institut für Theoretische Physik, Universität Heidelberg,Philosophenweg 16, Heidelberg (Germany); Russell, Michael [School of Physics and Astronomy, University of Glasgow,Glasgow G12 8QQ, Glasgow (United Kingdom); Schell, Torben [Institut für Theoretische Physik, Universität Heidelberg,Philosophenweg 16, Heidelberg (Germany)

    2017-05-02

    Machine learning based on convolutional neural networks can be used to study jet images from the LHC. Top tagging in fat jets offers a well-defined framework to establish our DeepTop approach and compare its performance to QCD-based top taggers. We first optimize a network architecture to identify top quarks in Monte Carlo simulations of the Standard Model production channel. Using standard fat jets we then compare its performance to a multivariate QCD-based top tagger. We find that both approaches lead to comparable performance, establishing convolutional networks as a promising new approach for multivariate hypothesis-based top tagging.

  13. Toiduainetööstuse TOP aastal 2006 / Rivo Sarapik

    Index Scriptorium Estoniae

    Sarapik, Rivo, 1981-

    2007-01-01

    Ilmunud ka: Delovõje Vedomosti : Promõshlennost 17. okt. lk. 12-13. Edukamad toiduainetööstuse tootjad 2006. aastal. Vt. samas: Toiduainetööstuse üld- ja finantsandmed; Käibe TOP 5; Käibe kasvu TOP 5; Kasumi TOP 5; Kasumi kasvu TOP 5; Rentaabluse TOP 5; Omakapitali tootlikkuse TOP 5; Ketlin Priilinn:Võru Juust tipus emafirma abiga. Kommenteerib Tiia Karu. Diagramm; AS Tere tõuseb raske töö toel. Kommenteerib Aivar Häelm. Diagramm; Maag ajab jonnakusega oma asja. Diagramm

  14. Deep-learning top taggers or the end of QCD?

    International Nuclear Information System (INIS)

    Kasieczka, Gregor; Plehn, Tilman; Russell, Michael; Schell, Torben

    2017-01-01

    Machine learning based on convolutional neural networks can be used to study jet images from the LHC. Top tagging in fat jets offers a well-defined framework to establish our DeepTop approach and compare its performance to QCD-based top taggers. We first optimize a network architecture to identify top quarks in Monte Carlo simulations of the Standard Model production channel. Using standard fat jets we then compare its performance to a multivariate QCD-based top tagger. We find that both approaches lead to comparable performance, establishing convolutional networks as a promising new approach for multivariate hypothesis-based top tagging.

  15. Top wealth shares in Australia 1915-2012

    OpenAIRE

    Katic, Pamela; Leigh, Andrew

    2016-01-01

    Combining data from surveys, inheritance tax records, and rich lists, we estimate top wealth shares for Australia from World War I until the present day. We find that the top 1 percent share declined by two-thirds from 1915 until the late 1960s, and rose from the late 1970s to 2010. The recent increase is sharpest at the top of the distribution, with the top 0.001 percent wealth share tripling from 1984 to 2012. The trend in top wealth shares is similar to that in Australian top income shares...

  16. The race to decipher the top secrets of TOP mRNAs.

    Science.gov (United States)

    Meyuhas, Oded; Kahan, Tamar

    2015-07-01

    Cells encountering hostile growth conditions, like those residing in the middle of a newly developing solid tumor, conserve resources and energy by downregulating protein synthesis. One mechanism in this response is the translational repression of multiple mRNAs that encode components of the translational apparatus. This coordinated translational control is carried through a common cis-regulatory element, the 5' Terminal OligoPyrimidine motif (5'TOP), after which these mRNAs are referred to as TOP mRNAs. Subsequent to the initial structural and functional characterization of members of this family, the research of TOP mRNAs has progressed in three major directions: a) delineating the landscape of the family; b) establishing the pathways that transduce stress cues into selective translational repression; and c) attempting to decipher the most proximal trans-acting factor(s) and defining its mode of action--a repressor or activator. The present chapter critically reviews the development in these three avenues of research with a special emphasis on the two "top secrets" of the TOP mRNA family: the scope of its members and the identity of the proximal cellular regulator(s). This article is part of a Special Issue entitled: Translation and Cancer. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Stress analysis of longwall top coal caving

    Energy Technology Data Exchange (ETDEWEB)

    Alehossein, H.; Poulsen, B.A. [CSIRO Exploration & Mining, Brisbane, Qld. (Australia)

    2010-01-15

    Longwall top coal caving (LTCC) is a relatively new method of mining thick coal seams that is currently achieving high productivity and efficiency. The technique is similar to traditional longwall mining in that a cutting head slices coal from the lower section of the coal seam onto a conveyor belt installed in front of the hydraulic support near the cutting face. In modern LTCC an additional rear conveyor belt is located behind the support, to which the flow of the caved coal from the upper part of the seam can be controlled by a moveable flipper attached to the canopy of the support. The mining method relies on the fracturing of the top coal by the front abutment pressure to achieve satisfactory caving into the rear conveyor. This paper develops a yield and caveability criterion based on in situ conditions in the top coal in advance of the mining face (yield) and behind the supports (caveability). Yielding and caving effects are combined into one single number called caving number (CN), which is the multiplication result of caving factor (CF) and yield factor (YF). Analytical derivations are based on in situ stress conditions, Mohr-Coulomb and/or Hoek-Brown rock failure criteria and an on-associated elastoplastic strain softening material behaviour. The yield and caveability criteria are in agreement with results from both numerical studies and mine data. The caving number is normalised to mining conditions of a reference Chinese mine (LMX mine) and is used to assess LTCC performance at fourteen other Chinese working longwalls that have had varying success with the LTCC technology. As a predictive model, results of this analytical/numerical study are useful to assess the potential success of caving in new LTCC operations and in different mining conditions.

  18. Architecture of top down, parallel pattern recognition system TOPS and its application to the MR head images

    International Nuclear Information System (INIS)

    Matsunoshita, Jun-ichi; Akamatsu, Shigeo; Yamamoto, Shinji.

    1993-01-01

    This paper describes about the system architecture of a new image recognition system TOPS (top-down parallel pattern recognition system), and its application to the automatic extraction of brain organs (cerebrum, cerebellum, brain stem) from 3D-MRI images. Main concepts of TOPS are as follows: (1) TOPS is the top-down type recognition system, which allows parallel models in each level of hierarchy structure. (2) TOPS allows parallel image processing algorithms for one purpose (for example, for extraction of one special organ). This results in multiple candidates for one purpose, and judgment to get unique solution for it will be made at upper level of hierarchy structure. (author)

  19. Top tagging with deep neural networks [Vidyo

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Recent literature on deep neural networks for top tagging has focussed on image based techniques or multivariate approaches using high level jet substructure variables. Here, we take a sequential approach to this task by using anordered sequence of energy deposits as training inputs. Unlike previous approaches, this strategy does not result in a loss of information during pixelization or the calculation of high level features. We also propose new preprocessing methods that do not alter key physical quantities such as jet mass. We compare the performance of this approach to standard tagging techniques and present results evaluating the robustness of the neural network to pileup.

  20. Resonance in a Cone-Topped Tube

    Directory of Open Access Journals (Sweden)

    Angus Cheng-Huan Chia

    2011-06-01

    Full Text Available The relationship between ratio of the upper opening diameter of a cone-topped cylinder to the cylinder diameter,and the ratio of the length of the air column to resonant period was examined. Plastic cones with upper openings ranging from 1.3 cm to 3.6 cm and tuning forks with frequencies ranging from 261.6 Hz to 523.3 Hz were used. The transition from a standing wave in a cylindrical column to a Helmholtz-type resonance in a resonant cavity with a narrow opening was observed.

  1. SM+Top at the LHC

    CERN Document Server

    McCarthy, Tom; The ATLAS collaboration

    2018-01-01

    This overview talk highlights some of the latest results by the ATLAS, CMS & LHCb collaborations. A particular focus is placed on some of the rarer Standard Model processes which have recently become accessible with the large set of proton-proton collision data collected during the successful second run of the LHC at $\\sqrt{s}$ = 13 TeV. Searches and cross-section measurements involving top quark signatures are given prominence, as well as those targeting highly boosted objects such as SM W/Z and Higgs bosons, and which consequently feature large-R jets and substructure techniques.

  2. A top-face-sway electromagnetic micromotor

    Science.gov (United States)

    Liang, Jingqiu; Le, Zichun; Yao, Jinsong; Wu, Zhiyong; Jia, Hongguang; Wu, Yihui; Jia, Zhi; 1, Qiongying Lu; Xuan, Ming; Wang, Lijun

    2003-04-01

    In this paper, the structure of a top-face-sway electromagnetic micromotor and its principle, fabrication and performance are introduced. A combination of the electromagnetic actuating and the planetary reducing provides this micromotor an advantage of low rotational speed and high torque. In addition, since a flexible coupling absorbs the sway and only outputs rotation, it gives this micromotor a balanced output. The dimension of the micromotor is 5 mm. Its rotation speed has a range of 20 - 860 rpm, and its driving current is 300 mA. The output torque of the micromotor is measured to be 13.0 ?Nm.

  3. Measurement of the top quark mass

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, Tzu-Chung Frank [Univ. of Michigan, Ann Arbor, MI (United States)

    1998-01-01

    From p$\\bar{p}$ collisions at √s = 1.8 TeV in the Fermilab Tevatron collider, top quarks are produced predominantly in t$\\bar{t}$ pairs. After applying a sophisticated event selection to the ≈ 100pb -1 data recorded by the D0 detector, we have 35 t$\\bar{t}$ → e(μ) + jets candidates with the backgrounds estimated to be 16.3 ± 2.2. We perform a kinematically constrained fit for individual events, and the results are input to a likelihood analysis.

  4. Top quark asymmetry and dijet resonances

    CERN Document Server

    Jung, Sunghoon; Wells, James D.

    2011-01-01

    CDF recently reported an anomaly in the $m_{jj}$ distribution of dijet events produced in association with a $W$ boson. If this anomaly is associated with a new flavor conserving vector resonance, $V$, one might have expected to observe effects in the analogous $m_{jj}$ distribution produced in association with a $\\gamma$. No such excess is observed. A single $u-t-V$ flavor changing coupling, however, can contribute to the $m_{jj}$ anomaly while being consistent with other resonance searches. Furthermore, it gives a potential explanation of the observed forward-backward asymmetry in top quark production.

  5. TOP MANAGEMENT SUPPORT TO CLIMATE CHANGE

    OpenAIRE

    Siqueira de Morais Neto; Maurício Fernandes Pereira

    2014-01-01

    The article theme is the Corporate Climate Change and aims to identify whether there is top management support to the companies’ attitudes related to the climate change, with a comparison between two groups of enterprises, “Brazil” and “S&P 500 MZ”, using the Carbon Disclosure Project database. It was used a methodology of a descriptive nature based on secondary data collection, which was done through literature review and the observation of the CDP’s questionnaires. It was observed that 62% ...

  6. Search for anomalous Wtb couplings in single top quark production ...

    Indian Academy of Sciences (India)

    2012-11-08

    Nov 8, 2012 ... Single top quark production provides a unique probe ... our search is improved by dividing our data into six independent analysis ... After the event selection, the expected single top quark contribution is smaller than the.

  7. Review of recent top-quark LHC combinations

    CERN Document Server

    Cortiana, Giorgio

    2014-01-01

    A review of recent combinations of top-quark measurements performed at the LHC, by the ATLAS and CMS collaborations, is provided. The typical uncertainty categorisations, and their assumed correlation patterns are presented, together with the results of the combinations of the top-quark pair and single top-quark production cross sections, the top-quark mass, as well as of the $W$ boson polarisation and the charge asymmetry in $t\\bar t$ events.

  8. Highlights of top quark properties measurements at ATLAS

    CERN Document Server

    Barranco Navarro, Laura; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, this gives the unique opportunity to probe the properties of bare quarks. This talk focuses on a few recent precision measurements of top quark properties in production and decay by the ATLAS Collaboration. Measurements of the top quark mass and searches for rare top quark decays are also presented.

  9. Highlights of top quark properties measurements at ATLAS

    CERN Document Server

    Barranco Navarro, Laura; The ATLAS collaboration

    2017-01-01

    The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, this gives the unique opportunity to probe the properties of bare quarks. This talk will focus on a few recent precision measurements of top quark properties in production and decay by the ATLAS Collaboration. Measurements of the top quark mass and searches for rare top quark decays are also presented.

  10. Toponium Tests Of Top-Quark Higgs Bags

    OpenAIRE

    Macpherson, Alick L.; Campbell, Bruce A.

    1993-01-01

    Recently it has been suggested that top quarks, or very massive fourth generation quarks, might surround themselves with a Higgs "bag" of deformation of the Higgs expectation value from its vacuum magnitude. In this paper we address the question of whether such nonlinear Higgs-top interaction effects are subject to experimental test. We first note that if top quarks were necessarily accompanied by Higgs "bags", then top quark weak decay would involve the sudden disruption of the Higgs "bag", ...

  11. Measurement of the top quark mass

    International Nuclear Information System (INIS)

    Varnes, E.W.

    1997-01-01

    This dissertation describes the measurement of the top quark mass m t using events recorded during a 125 pb -1 exposure of the D0 detector to √s=1.8 TeV anti pp collisions. Six events consistent with the hypothesis t anti t → bW + , anti bW - → b anti lν, anti bl anti ν form the dilepton sample. The kinematics of such events may be reconstructed for any assumed mt, and the likelihood of each such solution evaluated. A measurement of m t based on these relative solution likelihoods gives m t = 169.9 ± 14.8 (stat.) ± 3. 8 (syst.) GeV/c 2 . A 2C kinematic fit is performed on a sample of 77 events consistent with t anti t → bW + , anti bW - → b anti lν, anti bq anti q , and this, in combination with an estimate on the likelihood that each event is top, yields m t = 173.3 ± 5.6 (stat.) ± 6.2 (syst.) GeV/c 2 . A combination of these two measurements gives m t = 173.1 ± 5.2 (stat.) ± 5.7 (syst.) GeV/c 2

  12. Spin-one top partner: phenomenology

    Science.gov (United States)

    Collins, Jack H.; Jain, Bithika; Perelstein, Maxim; Lorier, Nicolas Rey-Le

    2014-08-01

    Cai, Cheng, and Terning (CCT) suggested a model in which the left-handed top quark is identified with a gaugino of an extended gauge group, and its superpartner is a spin-1 particle. We perform a phenomenological analysis of this model, with a focus on the spin-1 top partner, which we dub the "swan". We find that precision electroweak fits, together with direct searches for Z ' bosons at the LHC, place a lower bound of at least about 4.5 TeV on the swan mass. An even stronger bound, 10 TeV or above, applies in most of the parameter space, mainly due to the fact that the swan is typically predicted to be significantly heavier than the Z '. We find that the 125 GeV Higgs can be easily accommodated in this model with non-decoupling D-terms. In spite of the strong lower bound on the swan mass, we find that corrections to Higgs couplings to photons and gluons induced by swan loops are potentially observable at future Higgs factories. We also briefly discuss the prospects for discovering a swan at the proposed 100 TeV pp collider.

  13. Top-tier requirements for KNGR

    International Nuclear Information System (INIS)

    Sung-Jae, Ch.; Kwangho, L.; Dong Wook, J.

    1996-01-01

    In 1992, Korea Electric Power Corporation (KEPCO) has launched the next generation reactor project to develop the standard design of an advanced pressurized water reactor by 2000. This advanced reactor aims to have the sufficient capability to be a safe, environmentally sound and economical energy source for 2000's in Korea. In conjunction with the project development, the program phase I is studied and it is in the Korean Next Generation Reactor (KNGR) first phase project that the requirements of this specification called ''Top-tier'' have been established. These functional requirements are of the first importance for the design, construction and operation of a nuclear power plant. These requirements are divided into safety requirements, serious accidents control, design base requirements, definition of the system characteristics, performance, construction feasibility, economical objectives, site parameters and design processes. The ''Top-tier'' requirements are concentrated on the improvement of the safety and reliability. Safety is one of the first priorities. In particular, the requirements for the design of the next reactors generation must include the capacity to control serious accidents because when an accident occurs, the protection degree is crucial. The KNGR requirements include the existing nuclear power plants competitiveness as well as those of the coal thermal plants. Moreover, when safety is reinforced, the economic competitiveness can be assured. At the present time, a subsequent specification for the KNGR considering the bases of the domestic technology and experimenting the running. (O.M.)

  14. On the Interpretation of Top Partners Searches

    CERN Document Server

    Matsedonskyi, Oleksii; Wulzer, Andrea

    2014-01-01

    Relatively light Top Partners are unmistakable signatures of reasonably Natural Composite Higgs models and as such they are worth searching for at the LHC. Their phenomenology is characterized by a certain amount of model-dependence, which makes the interpretation of Top Partner experimental searches not completely straightforward especially if one is willing to take also single production into account. We describe a model-independent strategy by which the interpretation is provided on the parameter space of a Simplified Model that captures the relevant features of all the explicit constructions. The Simplified Model limits are easy to interpret within explicit models, in a way that requires no recasting and no knowledge of the experimental details of the analyses. We illustrate the method by concrete examples, among which the searches for a charge 5/3 Partner in same-sign dileptons and the searches for a charge 2/3 singlet. In each case we perform a theory recasting of the available 8 TeV Run-1 results and a...

  15. All-solution processed organic solar cells with top illumination

    NARCIS (Netherlands)

    Patil, B.R.; Shanmugam, S.; Teunissen, J.P.; Galagan, Y.

    2015-01-01

    All-solution processed organic solar cells with inverted device architecture were demonstrated. Devices contain opaque bottom electrodes and semitransparent top electrodes, resulting in top illuminated devices. Nanoparticles-based Ag ink was used for inkjet printing both top and bottom electrodes.

  16. Top 10% Admissions in the Borderlands: Access and Success of Borderland Top Students at Texas Public Universities

    Science.gov (United States)

    Rodríguez, Cristóbal

    2016-01-01

    This study focuses on Texas Borderland students admitted through the Texas Top 10% admissions policy, which assumes that Top 10% students are college ready for any public university and provides Top 10% high school graduates automatic admission to any 4-year public university in Texas. Using descriptive and inferential statistics, results…

  17. Top-quark pair production in a running mass scheme

    Energy Technology Data Exchange (ETDEWEB)

    Dowling, M. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Moch, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik

    2013-11-15

    Between the Tevatron and LHC, top-quark physics is now becoming an area for precision physics. This has lead to an increase in theoretical activity to match the experimental accuracy of top anti-top production. We discuss the difficulty in properly defining the top-quark mass as measured by experiments and present results for differential distributions of top-quark pair production in a running mass scheme. The use of such a scheme shows better convergence in the perturbative expansion and improves the scale dependence as opposed to the typical on-shell scheme.

  18. Top searches and R-parity violation at hadron colliders

    International Nuclear Information System (INIS)

    Dreiner, H.

    1991-07-01

    In R p -violating supersymmetric theories there are new 2-body top quark decays which can substantially suppress the branching fraction of the Standard Model process t → bW + → bl + υ 1 . With some choices of the dominant R p -violating operator the CDF top-quark mass bound can be lowered below the LEP bound. With other choices, however, leptonic signals from top decay become much stronger; in such scenarios the bounds on the top quark mass become more stringent than the Standard Model bounds. In future top quark searches R p -violating decays could lead to the most prominent signals. (author)

  19. Top-quark pair production in a running mass scheme

    International Nuclear Information System (INIS)

    Dowling, M.; Moch, S.; Hamburg Univ.

    2013-11-01

    Between the Tevatron and LHC, top-quark physics is now becoming an area for precision physics. This has lead to an increase in theoretical activity to match the experimental accuracy of top anti-top production. We discuss the difficulty in properly defining the top-quark mass as measured by experiments and present results for differential distributions of top-quark pair production in a running mass scheme. The use of such a scheme shows better convergence in the perturbative expansion and improves the scale dependence as opposed to the typical on-shell scheme.

  20. Top Polarisation in H-t and Wt production

    International Nuclear Information System (INIS)

    Godbole, R.M.; Hartgring, L.; Niessen, I.; White, C.D.

    2012-01-01

    We consider laboratory frame observables (like the azimuthal angle between the top quark and its decay lepton or the polar angle between the top quark and leptonic directions) obtained from leptonic decay products of top quarks produced in association with a charged Higgs or W boson. These are robust against QCD corrections to top quark decay, and can be used to pin down the parameter space of a charged Higgs boson, or reduce backgrounds in H - t and (Standard Model) Wt production. Polarisation information can efficiently be used to distinguish single top quark production processes from their backgrounds, as well as to pin down the parameters of a charged Higgs boson model

  1. Deep Learning Techniques for Top-Quark Reconstruction

    CERN Document Server

    Naderi, Kiarash

    2017-01-01

    Top quarks are unique probes of the standard model (SM) predictions and have the potential to be a window for physics beyond the SM (BSM). Top quarks decay to a $Wb$ pair, and the $W$ can decay in leptons or jets. In a top pair event, assigning jets to their correct source is a challenge. In this study, I studied different methods for improving top reconstruction. The main motivation was to use Deep Learning Techniques in order to enhance the precision of top reconstruction.

  2. Colorful Twisted Top Partners and Partnerium at the LHC

    International Nuclear Information System (INIS)

    Kats, Yevgeny; McCullough, Matthew; Perez, Gilad; Soreq, Yotam; Thaler, Jesse

    2017-01-01

    In scenarios that stabilize the electroweak scale, the top quark is typically accompanied by partner particles. In this work, we demonstrate how extended stabilizing symmetries can yield scalar or fermionic top partners that transform as ordinary color triplets but carry exotic electric charges. We refer to these scenarios as “hypertwisted” since they involve modifications to hypercharge in the top sector. As proofs of principle, we construct two hypertwisted scenarios: a supersymmetric construction with spin-0 top partners, and a composite Higgs construction with spin-1/2 top partners. In both cases, the top partners are still phenomenologically compatible with the mass range motivated by weak-scale naturalness. The phenomenology of hypertwisted scenarios is diverse, since the lifetimes and decay modes of the top partners are model dependent. The novel coupling structure opens up search channels that do not typically arise in top-partner scenarios, such as pair production of top-plus-jet resonances. Furthermore, hypertwisted top partners are typically sufficiently long lived to form “top-partnerium” bound states that decay predominantly via annihilation, motivating searches for rare narrow resonances with diboson decay modes.

  3. NATIONAL IDENTITY OF TOP – LEVEL ATHLETES

    Directory of Open Access Journals (Sweden)

    Mojca Doupona Topič

    2012-09-01

    Full Text Available Elite international sports are staged in connection with national symbols and involve competitions between athletes and teams representing nation-states. The victors regularly express their joy by displaying their national flag, and spectators use victories as occasions for reaffirming and articulating national pride. The aim of the study was to determine how national identity is formed in connection with sports, and the ways that national identity is integrated into the lives of athletes. The sample included top-level athletes. All participants were members of the Slovenian national team (handball, voleyball, track and field, swimming, cross country skiing, rowing. Social-demographic variables, value categories, motivation for competition, national pride, awareness to be Slovenianian-ness were analysed. Results shows that sporting achievements do have a strong correlation with the national identity.

  4. Top quark pair production beyond NNLO

    Energy Technology Data Exchange (ETDEWEB)

    Muselli, Claudio [TIF Lab, Dipartimento di Fisica, Università di Milano, and INFN - Sezione di Milano,Via Celoria 16, I-20133 Milano (Italy); Bonvini, Marco [Rudolf Peierls Centre for Theoretical Physics, University of Oxford,1 Keble Road, OX1 3NP, Oxford (United Kingdom); Forte, Stefano [TIF Lab, Dipartimento di Fisica, Università di Milano, and INFN - Sezione di Milano,Via Celoria 16, I-20133 Milano (Italy); Marzani, Simone [Center for Theoretical Physics, Massachusetts Institute of Technology,77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Ridolfi, Giovanni [Dipartimento di Fisica, Università di Genova and INFN - Sezione di Genova,Via Dodecaneso 33, I-16146 Genova (Italy)

    2015-08-17

    We construct an approximate expression for the total cross section for the production of a heavy quark-antiquark pair in hadronic collisions at next-to-next-to-next-to-leading order (N{sup 3}LO) in α{sub s}. We use a technique which exploits the analyticity of the Mellin space cross section, and the information on its singularity structure coming from large N (soft gluon, Sudakov) and small N (high energy, BFKL) all order resummations, previously introduced and used in the case of Higgs production. We validate our method by comparing to available exact results up to NNLO. We find that N{sup 3}LO corrections increase the predicted top pair cross section at the LHC by about 4% over the NNLO.

  5. Top quark pair production beyond NNLO

    International Nuclear Information System (INIS)

    Muselli, Claudio; Bonvini, Marco; Forte, Stefano; Marzani, Simone; Ridolfi, Giovanni

    2015-01-01

    We construct an approximate expression for the total cross section for the production of a heavy quark-antiquark pair in hadronic collisions at next-to-next-to-next-to-leading order (N 3 LO) in α s . We use a technique which exploits the analyticity of the Mellin space cross section, and the information on its singularity structure coming from large N (soft gluon, Sudakov) and small N (high energy, BFKL) all order resummations, previously introduced and used in the case of Higgs production. We validate our method by comparing to available exact results up to NNLO. We find that N 3 LO corrections increase the predicted top pair cross section at the LHC by about 4% over the NNLO.

  6. The Great White Guppy: Top Predator

    Science.gov (United States)

    Michalski, G. M.

    2011-12-01

    Nitrogen isotopes are often used to trace the trophic level of members of an ecosystem. As part of a stable isotope biogeochemistry and forensics course at Purdue University, students are introduced to this concept by analyzing nitrogen isotopes in sea food purchased from local grocery stores. There is a systematic increase in 15N/14N ratios going from kelp to clams/shrimp, to sardines, to tuna and finally to shark. These enrichments demonstrate how nitrogen is enriched in biomass as predators consume prey. Some of the highest nitrogen isotope enrichments observed, however, are in the common guppy. We investigated a number of aquarium fish foods and find they typically have high nitrogen isotope ratios because they are made form fish meal that is produced primarily from the remains of predator fish such as tuna. From, a isotope perspective, the guppy is the top of the food chain, more ferocious than even the Great White shark.

  7. Top partners searches and composite Higgs models

    International Nuclear Information System (INIS)

    Matsedonskyi, Oleksii; Panico, Giuliano; Wulzer, Andrea

    2016-01-01

    Colored fermionic partners of the top quark are well-known signatures of the Composite Higgs scenario and for this reason they have been and will be subject of an intensive experimental study at the LHC. Performing an assessment of the theoretical implications of this experimental effort is the goal of the present paper. We proceed by analyzing a set of simple benchmark models, characterized by simple two-dimensional parameter spaces where the results of the searches are conveniently visualized and their impact quantified. We only draw exclusion contours, in the hypothesis of no signal, but of course our formalism could equally well be used to report discoveries in a theoretically useful format.

  8. CP violation and the top quark

    International Nuclear Information System (INIS)

    Atwood, D.

    1994-02-01

    We consider signals of CP violation in semi-leptonic decay of the top quark. We show that the transverse polarization asymmetries of the τ-lepton in the decay t → brv is extremely sensitive CP violation. As an illustration we consider CP phases arising from the charged Higgs exchange in the Weinberg three Higgs doublet model. Qualitatively, the polarization asymmetries are enhanced over rate or energy asymmetries by a factor of O(m t /m r ) ∼ 100 with a corresponding increase in sensitivity to CP violating parameters. We also examine τ polarization in b decays via b → cvr and find that may also be very effective in constraining CP violating effects such as those that arise from an extended Higgs sector

  9. Measurement of Top Mass and Properties with the ATLAS Detector

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    The extraordinary success of the LHC in delivering proton-proton collisions with large integrated luminosity allows the study of top-quark-enriched data samples with unprecedented statistics. This opens new possibilities for the assessment and further refinements of detector performance, and of data analysis tools. At the same time, different aspects of top-quark event modeling, as implemented in Monte Carlo simulations, can be tested and confronted with data with impressive precision. As an example, the description of the extra QCD radiation accompanying the top-anti-top system can be refined based on measurements. In this context, the experimental challenges and recent results on precision top-quark physics measurements within the ATLAS experiment are summarized and reviewed. In particular, the recent ATLAS top-quark mass result, obtained using a three dimensional template method, which allows the simultaneous determination of the top-quark mass together with a global jet energy scale factor (JSF), and a ...

  10. arXiv Top Quark Mass Measurements at the LHC

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00220136

    2016-01-01

    The top quark mass ($m_{top}$) is a fundamental parameter of the Standard Model of Particle Physics (SM). As the heaviest of all SM particles with a mass close to the electroweak symmetry-breaking scale, the top quark plays a pivotal role in the theory of elementary particles. The exact value of the top quark mass has implications on a number of theoretical predictions, which motivates the need for precision measurements of $m_{top}$. This document highlights a number of such measurements carried out by the ATLAS and CMS collaborations based on the combined LHC Run 1 datasets at centre-of-mass energies of $\\sqrt{s}=7$ and $8$ TeV. A wide range of analysis strategies are employed for a number of final-state signatures. Measurements of both the top quark pole mass as well as the value of $m_{top}$ as defined by the Monte Carlo generator in simulated signal samples are discussed.

  11. Jet Dipolarity: Top Tagging with Color Flow

    Energy Technology Data Exchange (ETDEWEB)

    Hook, Anson; Jankowiak, Martin; /SLAC /Stanford U., Phys. Dept.; Wacker, Jay G.; /SLAC

    2011-08-12

    A new jet observable, dipolarity, is introduced that can distinguish whether a pair of subjets arises from a color singlet source. This observable is incorporated into the HEPTopTagger and is shown to improve discrimination between top jets and QCD jets for moderate to high p{sub T}. The impressive resolution of the ATLAS and CMS detectors means that a typical QCD jet at the LHC deposits energy in {Omicron}(10-100) calorimeter cells. Such fine-grained calorimetry allows for jets to be studied in much greater detail than previously, with sophisticated versions of current techniques making it possible to measure more than just the bulk properties of jets (e.g. event jet multiplicities or jet masses). One goal of the LHC is to employ these techniques to extend the amount of information available from each jet, allowing for a broader probe of the properties of QCD. The past several years have seen significant progress in developing such jet substructure techniques. A number of general purpose tools have been developed, including: (i) top-tagging algorithms designed for use at both lower and higher p{sub T} as well as (ii) jet grooming techniques such as filtering, pruning, and trimming, which are designed to improve jet mass resolution. Jet substructure techniques have also been studied in the context of specific particle searches, where they have been shown to substantially extend the reach of traditional search techniques in a wide variety of scenarios, including for example boosted Higgses, neutral spin-one resonances, searches for supersymmetry, and many others. Despite these many successes, however, there is every reason to expect that there remains room for refinement of jet substructure techniques.

  12. Top-Cited Articles in Implant Dentistry.

    Science.gov (United States)

    Fardi, Anastasia; Kodonas, Konstantinos; Lillis, Theodoros; Veis, Alexander

    Citation analysis is the field of bibliometrics that uses citation data to evaluate the scientific recognition and the influential performance of a research article in the scientific community. The aim of this study was to conduct a bibliometric analysis of the top-cited articles pertaining to implant dentistry, to analyze the main characteristics, and to display the most interesting topics and evolutionary trends. The 100 top-cited articles published in "Dentistry, Oral Surgery, and Medicine" journals were identified using the Science Citation Index Database. The articles were further reviewed, and basic information was collected, including the number of citations, journals, authors, publication year, study design, level of evidence, and field of study. The highly cited articles in implant dentistry were cited between 199 and 2,229 times. The majority of them were published in four major journals: Clinical Oral Implants Research, International Journal of Oral & Maxillofacial Implants, Journal of Clinical Periodontology, and Journal of Periodontology. The publication year ranged from 1981 to 2009, with 45% published in a nine-year period (2001 to 2009). Publications from the United States (29%) were the most heavily cited, followed by those from Sweden (23%) and Switzerland (17%). The University of Göteborg from Sweden produced the highest number of publications (n = 19), followed by the University of Bern in Switzerland (n = 13). There was a predominance of clinical papers (n = 42), followed by reviews (n = 25), basic science research (n = 21), and proceedings papers (n = 12). Peri-implant tissue healing and health (24%), implant success/failures (19.2%), and biomechanical topics (16.8%) were the most common fields of study. Citation analysis in the field of implant dentistry reveals interesting information about the topics and trends negotiated by researchers and elucidates which characteristics are required for a paper to attain a "classic" status. Clinical

  13. Proceedings of TopSafe 2008 Transactions

    International Nuclear Information System (INIS)

    2008-01-01

    The aim of the conference is to provide a forum for addressing the current status and future perspectives with regards to safety at nuclear installations worldwide. Previous TopSafe editions took place in Budapest (1995) and Valencia (1998). The conference is directed at a broad range of experts in the area of nuclear safety, including professionals from the different disciplines involved in the safety of nuclear power plants, installations in other parts of the fuel cycle, and research reactors. It is aimed at professionals coming from the research organisations, universities, vendors, operators, regulatory bodies as well as policy makers. Top level representatives of the Countries that are constructing new nuclear power plants are invited. Regulators of all individual Countries with nuclear programme are expected to contribute the Conference. The topics of the conference are: Safety Issues of Operating Power Plants PWR and BWR, CANDU, WWER, RBMK; Application of European Utilities Requirements; Probabilistic and Deterministic Analysis; Shutdown Safety; Advances in Safety: Analysis Codes and Techniques; Severe Accidents Management; International Safety Studies; Emergency Planning; Risk Informed Application and Licensing; Regulatory Safety Requirements; Ageing and Life Extension; Power Upgrades and Relevant Topics; Management of Safety and Quality; Safety Culture and Self Assessment; Political and Public Perception of Nuclear Energy; Nuclear Power Plant Security; Safety Issues of Future Power Plants-Near term deployment reactors (EPR, SWR1000, AP1000, ESBWR, SBWR, ACR-1000) and Generation IV reactors; Safety Issues of Research Reactors (pool type and others); Fuel Cycle Facilities Safety-Uranium mining and conversion, enrichment and fuel production, reprocessing and transmutation, waste disposal. (authors)

  14. Proceedings of the 6th international workshop on top-quark physics. TOP 2013

    International Nuclear Information System (INIS)

    Husemann, Ulrich; Mildner, Hannes; Roscher, Frank

    2014-09-01

    The 6th International Workshop on Top-Quark Physics (TOP 2013) took place in Durbach, Germany, between September 14-19, 2013. Physicists from all over the world reported on the latest theoretical and experimental results on the physics of the top quark and discussed perspectives for the research field. While the weather in Durbach didn't always keep the promise, the scientific program certainly did: the 125 participants followed 50 plenary presentations in 15 topical sessions, complemented by a poster session in picturesque Staufenberg castle, in which 20 young scientist discussed their work over tarte flambee and and a glass of wine in front of their posters. All participants could vote for the best poster and the three best posters received prizes. In two question-and-answer sessions young physicists had the opportunity to meet world experts on top-quark physics in an informal atmosphere. The excursion brought the participants to the city of Strasbourg, France, with a boat trip on the Ill river and strolls through Strasbourg's beautiful old town. The TOP 2013 conference was co-organized by Karlsruhe Institute of Technology (KIT), DESY, and the University of Hamburg. We gratefully acknowledge the financial support the conference received from the DFG, the Helmholtz Alliance ''Physics at the Terascale'', the KIT Center Elementary Particle and Astroparticle Physics and from Blue Yonder. The conference would not have been possible without many helpers. First and foremost, we would like to thank our conference secretary, Mrs. Baerbel Braeunling. We would also like to thank the technical support team for the sessions (Martin Goerner, Steffen Roecker, Frank Roscher, Eike Schlieckau, Markus Seidel, Shawn Williamson), and the staff at Hotel Vier Jahreszeiten. We also thank Britta Liebaug for the design of the poster and the web page and Kirsten Sachs for her support in publishing these proceedings. Last but not least, the German top physics

  15. Proceedings of the 6th international workshop on top-quark physics. TOP 2013

    Energy Technology Data Exchange (ETDEWEB)

    Husemann, Ulrich; Mildner, Hannes; Roscher, Frank (eds.)

    2014-09-15

    The 6th International Workshop on Top-Quark Physics (TOP 2013) took place in Durbach, Germany, between September 14-19, 2013. Physicists from all over the world reported on the latest theoretical and experimental results on the physics of the top quark and discussed perspectives for the research field. While the weather in Durbach didn't always keep the promise, the scientific program certainly did: the 125 participants followed 50 plenary presentations in 15 topical sessions, complemented by a poster session in picturesque Staufenberg castle, in which 20 young scientist discussed their work over tarte flambee and and a glass of wine in front of their posters. All participants could vote for the best poster and the three best posters received prizes. In two question-and-answer sessions young physicists had the opportunity to meet world experts on top-quark physics in an informal atmosphere. The excursion brought the participants to the city of Strasbourg, France, with a boat trip on the Ill river and strolls through Strasbourg's beautiful old town. The TOP 2013 conference was co-organized by Karlsruhe Institute of Technology (KIT), DESY, and the University of Hamburg. We gratefully acknowledge the financial support the conference received from the DFG, the Helmholtz Alliance ''Physics at the Terascale'', the KIT Center Elementary Particle and Astroparticle Physics and from Blue Yonder. The conference would not have been possible without many helpers. First and foremost, we would like to thank our conference secretary, Mrs. Baerbel Braeunling. We would also like to thank the technical support team for the sessions (Martin Goerner, Steffen Roecker, Frank Roscher, Eike Schlieckau, Markus Seidel, Shawn Williamson), and the staff at Hotel Vier Jahreszeiten. We also thank Britta Liebaug for the design of the poster and the web page and Kirsten Sachs for her support in publishing these proceedings. Last but not least, the German top physics

  16. Injection schemes for the TOP Linac; Schemi di iniezione per il TOP Linac

    Energy Technology Data Exchange (ETDEWEB)

    Picardi, L.; Ronsivalle, C. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Dipt. Innovazione; Bartolini, R. [Istituto Superiore di Sanita' , Rome (Italy)

    1999-07-01

    In this report two schemes are studied for the injection in the SCDTL section of the TOP Linac of the proton beam produced by a 7 MeV linear accelerator. The project derives by an agreement between ENEA (National Agency for New Technology, Energy and Environment) and ISS. In these new versions of the design the constraint of a synchronization of the radio frequencies of the two accelerators is suppressed. [Italian] In questo rapporto sono studiati due schemi di iniezione nella sezione accelerante SCDTL a 3 GHz del TOP (terapia oncologica con protoni) linac del fascio di protoni generato da un acceleratore lineare di 7 MeV. L'acceleratore e' frutto di una convenzione tra L'ENEA e l'Istituto Superiore di Sanita'. Rispetto a versioni precedenti del progetto, viene eliminato il vincolo della sincronizzazione delle radiofrequenze dei due acceleratori.

  17. Top anti-top Asymmetries at the Tevatron and the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Peters, Yvonne Reinhild [DESY

    2012-11-01

    The heaviest known elementary particle today, the top quark, has been discovered in 1995 by the CDF and D0 collaborations at the Tevatron proton antiproton collider at Fermilab. Recently, the CDF and D0 collaborations have studied the forward-backward asymmetry in ttbar events, resulting in measured values larger than the standard model prediction. With the start of the LHC at CERN in 2010, a new top quark factory has opened and asymmetry measurements in ttbar have also been performed in a proton proton environment with higher collision energy. No deviations from the standard model have been noticed so far in the measurements of ATLAS and CMS. This article discusses recent results of asymmetry measurements in ttbar events of the ATLAS, CDF, CMS and D0 collaborations.

  18. Top-quark and top-squark production at hadron colliders at electroweak NLO

    Energy Technology Data Exchange (ETDEWEB)

    Kollar, M.

    2007-05-31

    In this work, the impact of electroweak (EW) contributions on the cross sections for the top-quark pair production within the Standard Model (SM) and for the top-squark pair production within the Minimal Supersymmetric Standard Model (MSSM) is investigated. For these processes, the EW-QCD interference leads to additional contributions which are not present at Born-level. In addition, parton densities at next-to-leading-order (NLO) in QED give rise to non-zero photon density in the proton. It is shown that the size of photon-induced production rates is comparable to other EW NLO contributions. The cross sections differential in invariant mass and transverse momentum of final state particles are studied and discussed in kinematic ranges accessible at the LHC and at the Tevatron. The NLO EW contributions become significant at high transverse momentum and high invariant mass and should be included in the numerical analysis. (orig.)

  19. Exploring the top-Higgs FCNC couplings at polarized linear colliders with top spin observables

    Energy Technology Data Exchange (ETDEWEB)

    Melić, Blaženka; Patra, Monalisa [Institut Ruđer Bošković, Theoretical Physics Division,Bijenička 54, HR-10000 Zagreb (Croatia)

    2017-01-11

    We study the nature of flavor changing neutral couplings of the top quark with the Higgs boson and the up/charm quark in the tt̄ production at linear colliders. There are previous bounds on such tqH couplings at both, linear and hadronic colliders, with the assumption that the top couples equally to the left and the right handed fermions. In this paper we examine chirality of the tqH coupling and construct different observables which will be sensitive to it. The kinematics of the emitted q from t→qH in tt̄ production is discussed and it was found that the polar angle distribution of q is sensitive to the chiral nature of tqH couplings. The observables in the context of top-antitop spin correlations, which are sensitive to new physics in the top decay are considered using different spin-quantization bases. It was found that in particular the off-diagonal basis can be useful to distinguish among the chiral tqH couplings. The sensitivity of the unpolarized ILC in probing the couplings at the 3σ level at √s = 500 GeV and L = 500 fb{sup −1} is also studied, resulting in predicted BR(t→qH)<1.19×10{sup −3}. This limit is further improved to BR(t→qH)<8.84×10{sup −4} with the inclusion of initial beam polarization of left handed electrons and right handed positrons.

  20. Search for a heavy top t' to Wq in top events

    Energy Technology Data Exchange (ETDEWEB)

    Cox, David

    2009-10-01

    We present a search for a massive quark (t{prime}) decaying to Wq and thus mimicking the top quark decay signature in data collected by the CDF II detector corresponding to 2.8 fb{sup -1}. We use the reconstructed mass of the t{prime} quark and the scalar sum of the transverse energies in the event to discriminate possible new physics from Standard Model processes, and set limits on a standard 4th generation t{prime} quark.

  1. Study of top-quark polarization in single-top-quark production at the CERN LHC

    CERN Document Server

    Espriu, Doménec

    2002-01-01

    This paper complements the study of single top production at the LHC aiming to estimate the sensitivity of different observables to the magnitude of the effective couplings. In a previous paper the dominant $W$-gluon fusion mechanism was considered, while here we extend the analysis to the subdominant (10% with our set of experimental cuts) s-channel process. In order to distinguish left from right effective couplings it is required to consider polarized cross-sections and/or include $m_b$ effects. The spin of the top is accessible only indirectly by measuring the angular distribution of its decay products. We show that the presence of effective right-handed couplings implies necessarily that the top is not in a pure spin state. We discuss to what extent quantum interference terms can be neglected in the measurement and therefore simply multiply production and decay probabilities clasically. The coarsening involved in the measurement process makes this possible. We determine for each process the optimal spin ...

  2. Measurement of top quark polarization in top-antitop lepton+jets final states at DØ

    Energy Technology Data Exchange (ETDEWEB)

    Augsten, Kamil [Czech Technical Univ., Prague (Czech Republic)

    2017-01-01

    This thesis presents a measurement of the top quark polarization in the $t\\overline{t}$ events produced in $p\\overline{p}$ collisions at $\\sqrt{s}=1.96$ TeV using data corresponding to 9.7 fb$^{-1}$ of integrated luminosity collected with the D0 detector at the Fermilab Tevatron Collider. The final states used in the measurement contain one lepton and at least three jets. The polarization is measured using the angular distribution of leptons along three different axes: the beam axis, the helicity axis, and the transverse axis normal to the $t\\overline{t}$ production plane. This is the first measurement of top quark polarization at the Tevatron Collider in lepton+jets final states, and the first measurement of transverse polarization in $t\\overline{t}$ production. The polarization along the beam axis is combined with the previous result in the dilepton final states by the D0 experiment. The observed distributions are consistent with the Standard Model of nearly no polarization and no indication for beyond Standard Model physics is observed. The measurement offers legacy result from unique Tevatron Collider data and provides more information about the top quark production and decays, about the properties of the heaviest elementary particle.

  3. TopFuel 2003 conference report

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The international conference, TopFuel 2003 - Nuclear Fuel for Today and Tomorrow, Experience and Outlook, was held in Wuerzburg on March 16-19, 2003. The event, which was organized jointly by the Atomic Energy Society of Japan (AESJ), the American Nuclear Society (ANS), the German Nuclear Society and the European Nuclear Society (ENS), provided a comprehensive overview of current topics and developments in nuclear fuel supply in more than ninety papers and poster presentations. At the plenary session, more than 300 participants from 15 countries discussed basic problems of nuclear fuel development, safety research, strategies of nuclear fuel supply in the 21st century, fuel fabrication, interim storage of fuel elements, and problems of fuel element design for nuclear power plants of the next generation. Seven technical sessions dealt with other topical developments in these fields: - feedback of experience in fuel use, - nuclear fuel cycle efforts to increase burnup, - trends in nuclear fuel design, - advanced methods and codes, - fabrication, - transport, nuclear fuel services. (orig.) [de

  4. Economic feeder for recharging and ``topping off''

    Science.gov (United States)

    Fickett, Bryan; Mihalik, G.

    2000-04-01

    Increasing the size of the melt charge significantly increases yield and reduces costs. Siemens Solar Industries is optimizing a method to charge additional material after meltdown (top-off) using an external feeder system. A prototype feeder system was fabricated consisting of a hopper and feed delivery system. The low-cost feeder is designed for simple operation and maintenance. The system is capable of introducing up to 60 kg of granular silicon while under vacuum. An isolation valve permits refilling of the hopper while maintaining vacuum in the growth furnace. Using the feeder system in conjunction with Siemens Solar Industries' energy efficient hot zone dramatically reduces power and argon consumption. Throughput is also improved as faster pull speeds can be attained. The increased pull speeds have an even greater impact when the charge size is increased. Further cost reduction can be achieved by refilling the crucible after crystal growth and pulling a second ingot run. Siemens Solar Industries is presently testing the feeder in production.

  5. Breaking open the set top box

    Science.gov (United States)

    Banks, David; Wiley, Anthony; Catania, Nicolas; Coles, Alastair N.; Smith, Duncan; Baynham, Simon; Deliot, Eric; Chidzey, Rod

    1998-02-01

    In this paper we describe the work being done at HP Labs Bristol in the area of home networks and gateways. This work is based on the idea of breaking open the set top box by physically separating the access network specific functions from the application specific functions. The access network specific functions reside in an access network gateway that can be shared by many end user devices. The first section of the paper present the philosophy behind this approach. The end user devices and the access network gateways must be interconnected by a high bandwidth network which can offer a bounded delay service for delay sensitive traffic. We are advocating the use of IEEE 1394 for this network, and the next section of the paper gives a brief introduction to this technology. We then describe a prototype digital video broadcasting satellite compliant gateway that we have built. This gateway could be used, for example, by a PC for receiving a data service or by a digital TV for receiving an MPEG-2 video service. A control architecture is the presented which uses a PC application to provide a web based user interface to the system. Finally, we provide details of our work on extending the reach of IEEE 1394 and its standardization status.

  6. Beam uniformity of flat top lasers

    Science.gov (United States)

    Chang, Chao; Cramer, Larry; Danielson, Don; Norby, James

    2015-03-01

    Many beams that output from standard commercial lasers are multi-mode, with each mode having a different shape and width. They show an overall non-homogeneous energy distribution across the spot size. There may be satellite structures, halos and other deviations from beam uniformity. However, many scientific, industrial and medical applications require flat top spatial energy distribution, high uniformity in the plateau region, and complete absence of hot spots. Reliable standard methods for the evaluation of beam quality are of great importance. Standard methods are required for correct characterization of the laser for its intended application and for tight quality control in laser manufacturing. The International Organization for Standardization (ISO) has published standard procedures and definitions for this purpose. These procedures have not been widely adopted by commercial laser manufacturers. This is due to the fact that they are unreliable because an unrepresentative single-pixel value can seriously distort the result. We hereby propose a metric of beam uniformity, a way of beam profile visualization, procedures to automatically detect hot spots and beam structures, and application examples in our high energy laser production.

  7. New type of hill-top inflation

    Energy Technology Data Exchange (ETDEWEB)

    Barvinsky, A.O.; Nesterov, D.V. [Theory Department, Lebedev Physics Institute, Leninsky Prospect 53, Moscow 119991 (Russian Federation); Kamenshchik, A.Yu., E-mail: barvin@td.lpi.ru, E-mail: Alexander.Kamenshchik@bo.infn.it, E-mail: nesterov@td.lpi.ru [Dipartimento di Fisica and INFN, via Irnerio 46, 40126 Bologna (Italy)

    2016-01-01

    We suggest a new type of hill-top inflation originating from the initial conditions in the form of the microcanonical density matrix for the cosmological model with a large number of quantum fields conformally coupled to gravity. Initial conditions for inflation are set up by cosmological instantons describing underbarrier oscillations in the vicinity of the inflaton potential maximum. These periodic oscillations of the inflaton field and cosmological scale factor are obtained within the approximation of two coupled oscillators subject to the slow roll regime in the Euclidean time. This regime is characterized by rapid oscillations of the scale factor on the background of a slowly varying inflaton, which guarantees smallness of slow roll parameters ε and η of the following inflation stage. A hill-like shape of the inflaton potential is shown to be generated by logarithmic loop corrections to the tree-level asymptotically shift-invariant potential in the non-minimal Higgs inflation model and R{sup 2}-gravity. The solution to the problem of hierarchy between the Planckian scale and the inflation scale is discussed within the concept of conformal higher spin fields, which also suggests the mechanism bringing the model below the gravitational cutoff and, thus, protecting it from large graviton loop corrections.

  8. New type of hill-top inflation

    Energy Technology Data Exchange (ETDEWEB)

    Barvinsky, A.O. [Theory Department, Lebedev Physics Institute,Leninsky Prospect 53, Moscow 119991 (Russian Federation); Department of Physics, Tomsk State University,Lenin Ave. 36, Tomsk 634050 (Russian Federation); Department of Physics and Astronomy, Pacific Institue for Theoretical Physics,University of British Columbia, 6224 Agricultural Road, Vancouver, BC V6T 1Z1 (Canada); Kamenshchik, A.Yu. [Dipartimento di Fisica and INFN,via Irnerio 46, 40126 Bologna (Italy); L.D. Landau Institute for Theoretical Physcis,Kosygin str. 2, 119334 Moscow (Russian Federation); Nesterov, D.V. [Theory Department, Lebedev Physics Institute,Leninsky Prospect 53, Moscow 119991 (Russian Federation)

    2016-01-20

    We suggest a new type of hill-top inflation originating from the initial conditions in the form of the microcanonical density matrix for the cosmological model with a large number of quantum fields conformally coupled to gravity. Initial conditions for inflation are set up by cosmological instantons describing underbarrier oscillations in the vicinity of the inflaton potential maximum. These periodic oscillations of the inflaton field and cosmological scale factor are obtained within the approximation of two coupled oscillators subject to the slow roll regime in the Euclidean time. This regime is characterized by rapid oscillations of the scale factor on the background of a slowly varying inflaton, which guarantees smallness of slow roll parameters ϵ and η of the following inflation stage. A hill-like shape of the inflaton potential is shown to be generated by logarithmic loop corrections to the tree-level asymptotically shift-invariant potential in the non-minimal Higgs inflation model and R{sup 2}-gravity. The solution to the problem of hierarchy between the Planckian scale and the inflation scale is discussed within the concept of conformal higher spin fields, which also suggests the mechanism bringing the model below the gravitational cutoff and, thus, protecting it from large graviton loop corrections.

  9. Top-quark mass measurements: Alternative techniques (LHC + Tevatron)

    CERN Document Server

    Adomeit, Stefanie; The ATLAS collaboration

    2014-01-01

    Measurements of the top-quark mass employing alternative techniques are presented, performed by the D0 and CDF collaborations at the Tevatron as well as the ATLAS and CMS experiments at the LHC. The alternative methods presented include measurements using the lifetime of $B$-hadrons, the transverse momentum of charged leptons and the endpoints of kinematic distributions in top quark anti-quark pair ($t\\bar{t}$) final states. The extraction of the top-quark pole mass from the $t\\bar{t}$ production cross-section and the normalized differential $t\\bar{t}$ + 1-jet cross-section are discussed as well as the top-quark mass extraction using fixed-order QCD predictions at detector level. Finally, a measurement of the top-quark mass using events enhanced in single top t-channel production is presented.

  10. Highlights of top quark cross-section measurements at ATLAS

    CERN Document Server

    Wilk, Fabian; The ATLAS collaboration

    2018-01-01

    Measurements of inclusive and differential top-quark production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at a center of mass energy of 8 TeV and 13 TeV. An inclusive measurements of top quark pair production as well as measurement of the cross section for single top production in association with a Z boson is is presented and both are compared to the best available theoretical calculations. Two differential measurement of the kinematic properties of top quark events are presented: one involving a single top produced in association with a W boson and one with top-antitop pair events which decay to an allhadronic final state.

  11. Development of top nozzle for Korean standard LWR fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. K.; Kim, I. K.; Choi, K. S.; Kim, Y. H.; Lee, J. N.; Kim, H. K. [KNFC, Taejon (Korea, Republic of)

    2001-10-01

    Performance evaluation was executed for each component and its assembly for the deduced Top Nozzles to develop the new Top Nozzle for LWR. This new Top Nozzle is composed of the optimum components among the derived Top Nozzles that have been evaluated in the viewpoint of structural integrity, simpleness of dismantle and assembly, manufacturability etc. In this study, the developed Top Nozzle satisfied all the related design criteria. In special, it makes fuel repair time reduced by assembling and disassembling itself as one body, and improves Fuel Assembly holddown ability by revising the design parameters of its spring and the structural integrity through the betterment of its geometrical shpae of Flange and Holddown Plate as compared with the existing LWR Top Nozzles.

  12. Highlights of top quark cross-section measurements at ATLAS

    Directory of Open Access Journals (Sweden)

    Berta Peter

    2017-01-01

    Full Text Available The highlights of the measurements of top quark production in proton-proton collisions at the Large Hadron Collider with the ATLAS detector are presented. The inclusive measurements of the top-pair production cross section have reached high precision and are compared to the best available theoretical calculations. The differential cross section measurements, including results using boosted top quarks, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers. Measurements of the single top quark production cross section are presented in the t-channel and s-channel, and with associated production with a W boson. For the t-channel production, results on the ratio between top quark and antitop quark production cross sections and differential measurements are also included.

  13. Deep-learning Top Taggers or The End of QCD?

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    https://arxiv.org/abs/1701.08784 Machine learning based on convolutional neural networks can be used to study jet images from the LHC. Top tagging in fat jets offers a well-defined framework to establish our DeepTop approach and compare its performance to QCD-based top taggers. We first optimize a network architecture to identify top quarks in Monte Carlo simulations of the Standard Model production channel. Using standard fat jets we then compare its performance to a multivariate QCD-based top tagger. We find that both approaches lead to comparable performance, establishing convolutional networks as a promising new approach for multivariate hypothesis-based top tagging.

  14. Angular correlations in top quark decays in standard model extensions

    International Nuclear Information System (INIS)

    Batebi, S.; Etesami, S. M.; Mohammadi-Najafabadi, M.

    2011-01-01

    The CMS Collaboration at the CERN LHC has searched for the t-channel single top quark production using the spin correlation of the t-channel. The signal extraction and cross section measurement rely on the angular distribution of the charged lepton in the top quark decays, the angle between the charged lepton momentum and top spin in the top rest frame. The behavior of the angular distribution is a distinct slope for the t-channel single top (signal) while it is flat for the backgrounds. In this Brief Report, we investigate the contributions which this spin correlation may receive from a two-Higgs doublet model, a top-color assisted technicolor (TC2) and the noncommutative extension of the standard model.

  15. Top Quark Properties Measurements with the ATLAS Experiment

    International Nuclear Information System (INIS)

    Quijada, J A Murillo

    2016-01-01

    Results on recent measurements of top quark properties with the ATLAS experiment at the European Laboratory, CERN, are shown. The measurements are performed using the full data set recorded during the LHC Run-I. The full data set consists of a collected integrated luminosities ∫Tdt of 4.6 fb -1 recorded at a proton-proton collision energy of √ s = 7 TeV and 20.3 fb -1 collected at 8 TeV. The mentioned top quark properties include: spin correlation, charge asymmetry, W-boson polarization, color flow, top mass and top width in events with a top and anti-top quark pair ( tt ). An introduction to the LHC and the ATLAS detector is included and latest main results from this experiment. The contents include the current world benchmark results for the different properties and plans for future measurements during the ongoing LHC Run-II. (paper)

  16. Over the top: Experiment and the testing of hypotheses in the search for the top quark

    Science.gov (United States)

    Staley, Kent Wade

    1998-07-01

    This study presents a historical account of experiments, performed by the Collider Detector at Fermilab (CDF) collaboration, which led to the discovery of the top quark, and a discussion of philosophical issues raised by that episode. The historical discussion is based on published and unpublished documents and oral history interviews, and is presented in two parts: First, the formation of the collaboration and construction of the detector are described. The activities of the collaborators during the period of detector construction are described in terms of the development of resources for a general experimental programme. Second, the development of the means of analyzing the data for the top quark search is described, particularly aspects of the analysis that were disputed. The hypothesis that collaboration researchers have come to regard the social process of resolving disputes as a matter of methodological importance is suggested. The philosophical discussion of the experiment employs the hierarchy of models approach of Patrick Suppes and Deborah Mayo in order to examine the logic of hypothesis testing and draw some conclusions regarding the nature of scientific evidence. In an extension of an argument presented by Peter Achinstein, the account of hypothesis testing given by hypothetico-deductivist philosophers such as Karl Popper and R. B. Braithwaite is examined in light of the reasoning employed in the top search, and is found wanting. The prediction based on the hypothesis being tested in the top search is found to have been inferred inductively from the experimental data. Finally, a discussion is presented of tuning on the signal, a form of bias in the testing of hypotheses. The proscription of this form of bias resembles John Worrall's requirement of use novelty, but is shown instead to serve the aim of devising a test of the hypothesis that is severe, in the sense articulated by Deborah Mayo. It is shown that the evaluation of evidence claims, as it

  17. The top production in p anti-p collisions

    International Nuclear Information System (INIS)

    Kurek, K.

    1982-01-01

    Conservative estimates of the top quarks production are made within a parton QCD model and lead to the sizeable cross sections. The intergrated cross sections σ sub(top)(p sub(T)> 2 GeV/c) for M sub(t)=20 GeV top production are equal to 1.8 μb and 6 μb at √s-540 GeV and 2000 GeV, respectively. (author)

  18. Kajian Gaya Interior Pada Restoran Tip Top di Kota Medan

    OpenAIRE

    Kevin

    2016-01-01

    The purpose of this study was to identify / determine the style of interior design that is applied to the Tip Top Restaurant in Medan as well as the public perception of the interior arrangement of Tip Top Restaurant in Medan by using qualitative and quantitative research methods. Qualitative research methods now that the observation / observation, observation of interior elements Tip Top restaurant is analyzed based on the criteria of interior design, this is done in order to ...

  19. A Theory of Top Income Taxation and Social Insurance

    OpenAIRE

    Francisco M. Gonzalez; Jean-Francois Wen

    2014-01-01

    The development of the welfare state in the Western economies between 1930 and 1990 coincided with a puzzling pattern in the taxation of top incomes. Effective tax rates at the top increased sharply but then gradually decreased, even as social transfers continued rising. We propose a new theory of the development of the welfare state to explain these facts. Our main insight is that social insurance and top income taxation are substitutes for averting social confl?ict. We emphasize the role of...

  20. Summary of the Session on the Top Quark

    Energy Technology Data Exchange (ETDEWEB)

    Chudoba, Jiri [Prague, Inst. Phys.; Butler, Joel [Fermilab; Soustruznik, Karel [Charles U.

    2012-01-01

    The CDF and DØ experiments at the Fermilab Tevatron and the ATLAS and CMS experiments at the Large Hadron Collider (LHC) showed recent results on the production and properties of the top quark. CP violation in top decays was discussed as an example of the kind of new studies that will become possible with the very large samples of top decays that will be produced at the LHC.

  1. Top quark physics: from a few to a few millions

    International Nuclear Information System (INIS)

    Gallinaro, M.

    2014-01-01

    As the heaviest known fundamental particle, the top quark has taken a central role in the study of fundamental interactions. The top quark mass is a fundamental parameter of the standard model which places constraints on the Higgs boson mass and electroweak symmetry breaking. Observations of the relative rates and kinematics of top quark final states may provide constraints for new physics processes. Past and current experimental measurements are presented with a critical view, and a look at the future prospects. (author)

  2. Top quark physics at the D0 experiment

    International Nuclear Information System (INIS)

    Heinson, A.P.

    1996-01-01

    In this paper I present the latest results on top quark physics from the D0 collaboration since the discovery of the top quark in March 1995. I summarize the discovery results, discuss progress since the discovery, and show how we can measure the top quark mass using three separate techniques. The measurements were made at the Fermilab Tevatron, a p bar p collider with √s = TeV, using ∼50 pb -1 data collected from 1992 to early 1995

  3. Power, politics, and top management team characteristics: do they matter?

    Science.gov (United States)

    Gerowitz, M B

    1998-01-01

    This study assesses the contributions of the leader power and top management team characteristics to perceived strategic capability. Low age heterogeneity and low tenure heterogeneity were found to have a positive association with perceived adaptability. High diversity in educational specialization was also found to be positively associated with adaptability. Top management perceptions of CEO power were, however, lower among high adaptors. Implications for leadership research, senior management recruitment, and the design of management development for top management teams are discussed.

  4. Top quark properties and mass measurements with the ATLAS detector

    CERN Document Server

    Negrini, Matteo; The ATLAS collaboration

    2017-01-01

    Highlights on recent measurements of top quark properties in ATLAS, using pp collision data at \\sqrt{s}= 8 TeV and 13 TeV, are presented. The measurements of the top quark polarization and spin correlation coefficients, the W boson helicity fractions, the structure of the Wtb vertex, the associated production of a t anti-t pair with a vector boson or a photon, and the top quark mass are all in agreement with the Standard Model expectations.

  5. Top quark mass spectrum from flavor-changing processes

    Energy Technology Data Exchange (ETDEWEB)

    Albright, C.H. (Northern Illinois Univ., Dekalb, IL (USA). Dept. of Physics Fermi National Accelerator Lab., Batavia, IL (USA))

    1990-09-01

    The input from flavor-changing processes is reviewed and results of several analyses are presented on the top quark mass spectrum without recourse to the neutral-current data. A top quark mass in the range 135 {plus minus} 25 GeV is much preferred, but a very massive top quark above 300 GeV can not be ruled out. Comments are made about the future use of the inclusive decay B {yields} {gamma} + X{sub S=1} for constraining the top quark mass. 24 refs., 2 figs.

  6. Top quark properties and mass measurements with the ATLAS detector

    CERN Document Server

    Moreno Llacer, Maria; The ATLAS collaboration

    2017-01-01

    ID# 104 Top quark properties and mass measurements with the ATLAS detector The top quark is unique among the known quarks in that it decays before it has an opportunity to form hadronic bound states. This makes measurements of its properties particularly interesting as one can access directly the properties of a bare quark. The latest measurements of these properties with the ATLAS detector at the LHC are presented using 8 TeV and 13 TeV data. Measurements of top quark spin observables in top-antitop events, each sensitive to a different coefficient of the spin density matrix, are presented and compared to the Standard Model predictions. The helicity of the W boson from the top decays and the production angles of the top quark are further discussed. Limits on the rate of flavour changing neutral currents in the production or decay of the top quark are reported. The production of top-quark pairs in association with W and Z bosons is also presented. The measurement probes the coupling between the top quark and ...

  7. Precision determination of the top-quark mass

    International Nuclear Information System (INIS)

    Moch, Sven-Olaf

    2014-08-01

    Precision determinations of the top-quark mass require theory predictions with a well-defined mass parameter in a given renormalization scheme. The top-quark's running mass in the MS scheme can be extracted with good precision from the total cross section at next-to-next-to-leading order in QCD. The Monte Carlo top-quark mass parameter measured from comparison to events with top-quark decay products is not identical with the pole mass. Its translation to the pole mass scheme introduces an additional uncertainty of the order of 1 GeV.

  8. Top quark properties and mass measurements with the ATLAS detector

    CERN Document Server

    Dado, Tomas; The ATLAS collaboration

    2017-01-01

    The top quark is unique among the known quarks in that it decays before it has an opportunity to form hadronic bound states. This makes measurements of its properties particularly interesting as one can access directly the properties of a bare quark. The latest measurements of these properties with the ATLAS detector at the LHC are presented. Measurements of top quark spin observables in top-antitop events, each sensitive to a different coefficient of the spin density matrix, are presented and compared to the Standard Model predictions. The helicity of the W boson from the top decays and the production angles of the top quark are further discussed. Limits on the rate of flavour changing neutral currents in the production or decay of the top quark are reported. The production of top-quark pairs in association with W and Z bosons is also presented. The measurement probes the coupling between the top quark and the Z boson. The cross-section measurement of photons produced in association with top-quark pairs is a...

  9. Top quark soliton and its anomalous chromomagnetic moment

    International Nuclear Information System (INIS)

    Berger, J.; Blotz, A.; Kim, H.; Goeke, K.

    1996-01-01

    We show that under the assumption of dynamical symmetry breaking of electroweak interactions by a top quark condensate, motivated by the top mode standard model, the top quark in this effective theory can be considered then as a chiral color soliton. This is realized in an effective four-fermion interaction with chiral SU(3) c as well as SU(2) L circle-times U Y (1) symmetry. In the pure top quark sector the soliton consists of a top valence quark and a Dirac sea of top quarks and top antiquarks coupled to a color octet of Goldstone pions. The mass spectra, isoscalar quadratic radii, and the anomalous chromomagnetic moment because of a nontrivial color form factor are calculated with zero and finite current top quark masses and effects at the hadron colliders are discussed. The anomalous chromomagnetic moment turns out to have a value consistent with the top quark production rates of the D0 and CDF measurements. copyright 1996 The American Physical Society

  10. Search for Single Top Quark Production at HERA

    CERN Document Server

    Aaron, F D; Alexa, C; Alimujiang, K; Andreev, V; Antunovic, B; Asmone, A; Backovic, S; Baghdasaryan, A; Barrelet, E; Bartel, W; Begzsuren, K; Belousov, A; Bizot, J C; Boudry, V; Bozovic-Jelisavcic, I; Bracinik, J; Brandt, G; Brinkmann, M; Brisson, V; Bruncko, D; Bunyatyan, A; Buschhorn, G; Bystritskaya, L; Campbell, A J; Cantun Avila, K B; Cassol-Brunner, F; Cerny, K; Cerny, V; Chekelian, V; Cholewa, A; Contreras, J G; Coughlan, J A; Cozzika, G; Cvach, J; Dainton, J B; Daum, K; Deak, M; de Boer, Y; Delcourt, B; Del Degan, M; Delvax, J; De Roeck, A; De Wolf, E A; Diaconu, C; Dodonov, V; Dossanov, A; Dubak, A; Eckerlin, G; Efremenko, V; Egli, S; Eliseev, A; Elsen, E; Falkiewicz, A; Favart, L; Fedotov, A; Felst, R; Feltesse, J; Ferencei, J; Fischer, D J; Fleischer, M; Fomenko, A; Gabathuler, E; Gayler, J; Ghazaryan, S; Glazov, A; Glushkov, I; Goerlich, L; Gogitidze, N; Gouzevitch, M; Grab, C; Greenshaw, T; Grell, B R; Grindhammer, G; Habib, S; Haidt, D; Helebrant, C; Henderson, R C W; Hennekemper, E; Henschel, H; Herbst, M; Herrera, G; Hildebrandt, M; Hiller, K H; Hoffmann, D; Horisberger, R; Hreus, T; Jacquet, M; Janssen, M E; Janssen, X; Jonsson, L; Jung, Andreas Werner; Jung, H; Kapichine, M; Katzy, J; Kenyon, I R; Kiesling, C; Klein, M; Kleinwort, C; Kluge, T; Knutsson, A; Kogler, R; Kostka, P; Kraemer, M; Krastev, K; Kretzschmar, J; Kropivnitskaya, A; Kruger, K; Kutak, K; Landon, M P J; Lange, W; Lastovicka-Medin, G; Laycock, P; Lebedev, A; Leibenguth, G; Lendermann, V; Levonian, S; Li, G; Lipka, K; Liptaj, A; List, B; List, J; Loktionova, N; Lopez-Fernandez, R; Lubimov, V; Lytkin, L; Makankine, A; Malinovski, E; Marage, P; Marti, Ll; Martyn, H U.; Maxfield, S J; Mehta, A; Meyer, A B; Meyer, H; Meyer, H; Meyer, J; Michels, V; Mikocki, S; Milcewicz-Mika, I; Moreau, F; Morozov, A; Morris, J V; Mozer, Matthias Ulrich; Mudrinic, M; Muller, K; Murin, P; Naumann, Th; Newman, P R; Niebuhr, C; Nikiforov, A; Nowak, G; Nowak, K; Nozicka, M; Olivier, B; Olsson, J E; Osman, S; Ozerov, D; Palichik, V; Panagoulias, I; Pandurovic, M; Papadopoulou, Th; Pascaud, C; Patel, G D; Pejchal, O; Perez, E; Petrukhin, A; Picuric, I; Piec, S; Pitzl, D; Placakyte, R; Pokorny, B; Polifka, R; Povh, B; Preda, T; Radescu, V; Rahmat, A J; Raicevic, N; Raspiareza, A; Ravdandorj, T; Reimer, P; Rizvi, E; Robmann, P; Roland, B; Roosen, R; Rostovtsev, A; Rotaru, M; Ruiz Tabasco, J E; Rurikova, Z; Rusakov, S; Salek, D; Sankey, D P C; Sauter, M; Sauvan, E; Schmitt, S; Schmitz, C; Schoeffel, L; Schoning, A; Schultz-Coulon, H C; Sefkow, F; Shaw-West, R N; Shtarkov, L N; Shushkevich, S; Sloan, T; Smiljanic, Ivan; Soloviev, Y; Sopicki, P; South, D; Spaskov, V; Specka, Arnd E; Staykova, Z; Steder, M; Stella, B; Stoicea, G; Straumann, U.; Sunar, D; Sykora, T; Tchoulakov, V; Thompson, G; Thompson, P D; Toll, T; Tomasz, F; Tran, T H; Traynor, D; Trinh, T N; Truol, P; Tsakov, I; Tseepeldorj, B; Turnau, J; Urban, K; Valkarova, A; Vallee, C; Van Mechelen, P; Vargas Trevino, A; Vazdik, Y; Vinokurova, S; Volchinski, V; von den Driesch, M; Wegener, D; Wissing, Ch; Wunsch, E; Zacek, J; Zalesak, J; Zhang, Z; Zhokin, A; Zimmermann, T; Zohrabyan, H; Zomer, F; Zus, R

    2009-01-01

    A search for single top quark production is performed in the full ep data sample collected by the H1 experiment at HERA, corresponding to an integrated luminosity of 474 pb^-1. Decays of top quarks into a b quark and a W boson with subsequent leptonic or hadronic decay of the W are investigated. A multivariate analysis is performed to discriminate top quark production from Standard Model background processes. An upper limit on the top quark production cross section via flavour changing neutral current processes sigma (ep -> etX) < 0.25 pb is established at 95% CL. Limits on the anomalous coupling kappa_{tu gamma} are derived.

  11. Chaotic population dynamics and biology of the top-predator

    International Nuclear Information System (INIS)

    Rai, Vikas; Upadhyay, Ranjit Kumar

    2004-01-01

    We study how the dynamics of a food chain depends on the biology of the top-predator. We consider two model food chains with specialist and generalist top-predators. Both types of food chains display same type of chaotic behavior, short-term recurrent chaos; but the generating mechanisms are drastically different. Food chains with specialist top-predators are dictated by exogenous stochastic factors. On the contrary, the dynamics of those with the generalist top-predator is governed by deterministic changes in system parameters. The study also suggests that robust chaos would be a rarity

  12. arXiv Top quark measurements in the CMS experiment

    CERN Document Server

    INSPIRE-00102167

    2017-01-01

    Experimental results on top-quark physics obtained at the CMS experiment are reported based on the data recorded at centre-of-mass energy up to 13 TeV. Inclusive and differential cross sections for both top-quark pair and single top-quark production are presented, as well as measurements of top-quark properties in production and decay, and searches for anomalous couplings. The presented measurements test theoretical predictions, including recent perturbative QCD calculations, provide constraints of fundamental standard model parameters, and set limits on physics beyond the standard model.

  13. Top-emitting organic light-emitting diodes.

    Science.gov (United States)

    Hofmann, Simone; Thomschke, Michael; Lüssem, Björn; Leo, Karl

    2011-11-07

    We review top-emitting organic light-emitting diodes (OLEDs), which are beneficial for lighting and display applications, where non-transparent substrates are used. The optical effects of the microcavity structure as well as the loss mechanisms are discussed. Outcoupling techniques and the work on white top-emitting OLEDs are summarized. We discuss the power dissipation spectra for a monochrome and a white top-emitting OLED and give quantitative reports on the loss channels. Furthermore, the development of inverted top-emitting OLEDs is described.

  14. Search for scalar top and scalar bottom quarks at LEP

    CERN Document Server

    Abbiendi, G.; Akesson, P.F.; Alexander, G.; Allison, John; Amaral, P.; Anagnostou, G.; Anderson, K.J.; Arcelli, S.; Asai, S.; Axen, D.; Azuelos, G.; Bailey, I.; Barberio, E.; Barlow, R.J.; Batley, R.J.; Bechtle, P.; Behnke, T.; Bell, Kenneth Watson; Bell, P.J.; Bella, G.; Bellerive, A.; Benelli, G.; Bethke, S.; Biebel, O.; Bloodworth, I.J.; Boeriu, O.; Bock, P.; Bonacorsi, D.; Boutemeur, M.; Braibant, S.; Brigliadori, L.; Brown, Robert M.; Buesser, K.; Burckhart, H.J.; Campana, S.; Carnegie, R.K.; Caron, B.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Csilling, A.; Cuffiani, M.; Dado, S.; Dallavalle, G.Marco; Dallison, S.; De Roeck, A.; De Wolf, E.A.; Desch, K.; Dienes, B.; Donkers, M.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Elfgren, E.; Etzion, E.; Fabbri, F.; Feld, L.; Ferrari, P.; Fiedler, F.; Fleck, I.; Ford, M.; Frey, A.; Furtjes, A.; Gagnon, P.; Gary, John William; Gaycken, G.; Geich-Gimbel, C.; Giacomelli, G.; Giacomelli, P.; Giunta, Marina; Goldberg, J.; Gross, E.; Grunhaus, J.; Gruwe, M.; Gunther, P.O.; Gupta, A.; Hajdu, C.; Hamann, M.; Hanson, G.G.; Harder, K.; Harel, A.; Harin-Dirac, M.; Hauschild, M.; Hauschildt, J.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Hensel, C.; Herten, G.; Heuer, R.D.; Hill, J.C.; Hoffman, Kara Dion; Homer, R.J.; Horvath, D.; Howard, R.; Huntemeyer, P.; Igo-Kemenes, P.; Ishii, K.; Jeremie, H.; Jovanovic, P.; Junk, T.R.; Kanaya, N.; Kanzaki, J.; Karapetian, G.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Kim, D.H.; Klein, K.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Komamiya, S.; Kormos, Laura L.; Kowalewski, Robert V.; Kramer, T.; Kress, T.; Krieger, P.; von Krogh, J.; Krop, D.; Kruger, K.; Kupper, M.; Lafferty, G.D.; Landsman, H.; Lanske, D.; Layter, J.G.; Leins, A.; Lellouch, D.; Letts, J.; Levinson, L.; Lillich, J.; Lloyd, S.L.; Loebinger, F.K.; Lu, J.; Ludwig, J.; Macpherson, A.; Mader, W.; Marcellini, S.; Marchant, T.E.; Martin, A.J.; Martin, J.P.; Masetti, G.; Mashimo, T.; Mattig, Peter; McDonald, W.J.; McKenna, J.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Mendez-Lorenzo, P.; Menges, W.; Merritt, F.S.; Mes, H.; Michelini, A.; Mihara, S.; Mikenberg, G.; Miller, D.J.; Moed, S.; Mohr, W.; Mori, T.; Mutter, A.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nisius, R.; O'Neale, S.W.; Oh, A.; Okpara, A.; Oreglia, M.J.; Orito, S.; Pahl, C.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poli, B.; Polok, J.; Pooth, O.; Przybycien, M.; Quadt, A.; Rabbertz, K.; Rembser, C.; Renkel, P.; Rick, H.; Roney, J.M.; Rosati, S.; Rozen, Y.; Runge, K.; Sachs, K.; Saeki, T.; Sahr, O.; Sarkisyan, E.K.G.; Schaile, A.D.; Schaile, O.; Scharff-Hansen, P.; Schieck, J.; Schoerner-Sadenius, Thomas; Schroder, Matthias; Schumacher, M.; Schwick, C.; Scott, W.G.; Seuster, R.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.; Skuja, A.; Smith, A.M.; Sobie, R.; Soldner-Rembold, S.; Spagnolo, S.; Spano, F.; Stahl, A.; Stephens, K.; Strom, David M.; Strohmer, R.; Tarem, S.; Tasevsky, M.; Taylor, R.J.; Teuscher, R.; Thomson, M.A.; Torrence, E.; Toya, D.; Tran, P.; Trefzger, T.; Tricoli, A.; Trocsanyi, Z.; Tsur, E.; Turner-Watson, M.F.; Ueda, I.; Ujvari, B.; Vachon, B.; Vollmer, C.F.; Vannerem, P.; Verzocchi, M.; Voss, H.; Vossebeld, J.; Waller, D.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wengler, T.; Wermes, N.; Wetterling, D.; Wilson, G.W.; Wilson, J.A.; Wolf, G.; Wyatt, T.R.; Yamashita, S.; Zer-Zion, D.; Zivkovic, Lidija

    2002-01-01

    Searches for a scalar top quark and a scalar bottom quark have been performed using a data sample of 438 pb-1 at centre-of-mass energies of sqrt(s) = 192 - 209 GeV collected with the OPAL detector at LEP. No evidence for a signal was found. The 95% confidence level lower limit on the scalar top quark mass is 97.6 GeV if the mixing angle between the supersymmetric partners of the left- and right-handed states of the top quark is zero. When the scalar top quark decouples from the Z0 boson, the lower limit is 95.7 GeV. These limits were obtained assuming that the scalar top quark decays into a charm quark and the lightest neutralino, and that the mass difference between the scalar top quark and the lightest neutralino is larger than 10 GeV. The complementary decay mode of the scalar top quark decaying into a bottom quark, a charged lepton and a scalar neutrino has also been studied. The lower limit on the scalar top quark mass is 93.0 GeV for this decay mode, if the mass difference between the scalar top quark a...

  15. TOP AND HIGGS PHYSICS AT THE HADRON COLLIDERS

    Energy Technology Data Exchange (ETDEWEB)

    Jabeen, Shabnam

    2013-10-20

    This review summarizes the recent results for top quark and Higgs boson measurements from experiments at Tevatron, a proton–antiproton collider at a center-of-mass energy of √ s =1 . 96 TeV, and the Large Hadron Collider, a proton–proton collider at a center- of-mass energy of √ s = 7 TeV. These results include the discovery of a Higgs-like boson and measurement of its various properties, and measurements in the top quark sector, e.g. top quark mass, spin, charge asymmetry and production of single top quark.

  16. Geometrization and Generalization of the Kowalevski Top

    Science.gov (United States)

    Dragović, Vladimir

    2010-08-01

    A new view on the Kowalevski top and the Kowalevski integration procedure is presented. For more than a century, the Kowalevski 1889 case, has attracted full attention of a wide community as the highlight of the classical theory of integrable systems. Despite hundreds of papers on the subject, the Kowalevski integration is still understood as a magic recipe, an unbelievable sequence of skillful tricks, unexpected identities and smart changes of variables. The novelty of our present approach is based on our four observations. The first one is that the so-called fundamental Kowalevski equation is an instance of a pencil equation of the theory of conics which leads us to a new geometric interpretation of the Kowalevski variables w, x 1, x 2 as the pencil parameter and the Darboux coordinates, respectively. The second is observation of the key algebraic property of the pencil equation which is followed by introduction and study of a new class of discriminantly separable polynomials. All steps of the Kowalevski integration procedure are now derived as easy and transparent logical consequences of our theory of discriminantly separable polynomials. The third observation connects the Kowalevski integration and the pencil equation with the theory of multi-valued groups. The Kowalevski change of variables is now recognized as an example of a two-valued group operation and its action. The final observation is surprising equivalence of the associativity of the two-valued group operation and its action to the n = 3 case of the Great Poncelet Theorem for pencils of conics.

  17. The new deal at the top.

    Science.gov (United States)

    Doz, Yves L; Kosonen, Mikko

    2007-06-01

    What makes a company strategically agile--able to alter its strategies and business models rapidly in response to major changes in its market space, and to do so repeatedly without major trauma? Three years of in-depth case research on a dozen large companies worldwide showed the authors that one key factor is a new leadership model at the top. Senior executives at agile companies assume collective rather than individual responsibility for results. They build interdependencies among units and divisions, motivating themselves to engage with one another, and carefully manage their dealings to promote collaboration that is frequent, intense, informal, open, and focused on shared issues and the long term. Challenges to conventional thinking are encouraged. This is the new deal, and it's not easy to strike, because it requires executives to act in ways that are far from comfortable. After all, the corporate ladder at most firms favors independent types with a deep need for power and autonomy. At executive meetings, disagreement is suppressed or expressed passive-aggressively, eroding any real sense of belonging to a team. Switching to the new deal almost always requires a huge shift in the company's culture, values, and norms of interaction. The authors describe three approaches to making the shift: Executives can be given formal responsibility not for a business unit but for different stages in the company's value chain. This worked well for SAP, which has a relatively focused business portfolio. When a company's portfolio is less uniform, like Nokia's, business and functional units can be organized to crisscross on a matrix. And when a company is widely diverse, like easyGroup, it can emphasize the learning opportunities that units with common business models may share.

  18. Top-quark pair production near threshold

    International Nuclear Information System (INIS)

    Sumino, Y.; Fujii, K.; Hagiwara, K.; Murayama, H.; Ng, C.

    1993-01-01

    We present a novel formalism to calculate the total and the differential cross sections for heavy unstable top-quark pair production near threshold. Within the context of the nonrelativistic quark model, we introduce the running toponium width Γ FTHETA (E,p) in the Schroedinger equation for the three-point Green's function that governs the t bar t contribution to the e + e- annihilation process. The effect of the running of the width is found to be significant in two aspects: (i) it takes account of the phase-space volume for the decay process t bar t→bW + bar bW- and provides a consistent framework for calculating the differential cross sections; and (ii) it reduces the widths of the low-lying resonances to considerably less than 2Γ t (m t 2 ). Furthermore, the running of the width causes the total cross section to decrease significantly at c.m. energies below the first ''resonance'' enhancement, whereas it makes the ''peak'' cross section more distinct than is obtained in the fixed toponium width approximation. We use the two-loop-improved QCD potential in our calculation, and the α s (m Z ) Mbar S dependences of the total and differential cross sections are studied quantitatively, where M bar S denotes the modified minimal subtraction scheme. We find that the correlations in the α s and m t measurements are opposite in the total and differential cross sections, and the simultaneous measurements would lead to an accurate determination of both parameters

  19. Top-philic scalar Dark Matter with a vector-like fermionic top partner

    Science.gov (United States)

    Baek, Seungwon; Ko, Pyungwon; Wu, Peiwen

    2016-10-01

    We consider a simple extension of the Standard Model with a scalar top-philic Dark Matter (DM) S coupling, apart from the Higgs portal, exclusively to the right-handed top quark t R and a colored vector-like top partner T with a Yukawa coupling y ST which we call the topVL portal. When the Higgs portal is closed and y ST is perturbative (≲1), T S → ( W + b, gt), SSto toverline{t} and Toverline{T}to (qoverline{q}, gg) provide the dominant (co) annihilation contributions to obtain ΩDM h 2 ≃ 0 .12 in light, medium and heavy DM mass range, respectively. However, large {y}_{ST}˜ O(10) can make SS → gg dominate via the loop-induced coupling C SSgg in the m S < m t region. In this model it is the C SSgg coupling that generates DM-nucleon scattering in the direct detection, which can be large and simply determined by ΩDM h 2 ≃ 0 .12 when SS → gg dominates the DM annihilation. The current LUX results can exclude the SS → gg dominating scenario and XENON-1T experiment may further test y ST ≳ 1, and 0 .5 ≲ y ST ≲ 1 may be covered in the future LUX-ZP experiment. The current indirect detection results from Fermi gamma-ray observations can also exclude the SS → gg dominating scenario and are sensitive to the heavy DM mass region, of which the improved sensitivity by one order will push DM mass to be above 400, 600, 1000 GeV for y ST = 0 .3 , 0 .5 , 1 .0, respectively. Toverline{T} pair produced at the hadron collider will decay 100% into [InlineMediaObject not available: see fulltext.] signal when kinematically open. The latest ATLAS 13 TeV 13.2 fb-1 data can excluded m T between 300 (650) and 1150 (1100) GeV for m S =40 (400) GeV and the exclusion region can reach up to m S ˜ 500 GeV.

  20. Top Quark Mass Measurements at ATLAS and CMS

    CERN Document Server

    McCarthy, Tom; The ATLAS collaboration

    2016-01-01

    The top quark mass ($m_{top}$) is a fundamental parameter of the Standard Model of Particle Physics (SM). As the heaviest of all known SM particles with a mass close to the EW symmetry breaking scale, the top quark plays a pivotal role in the theory of elementary particles. The exact value of the top quark mass has implications on a number of theoretical predictions, which motivates the need for precision measurements of $m_{top}$. This presentation highlights a number of such precision measurements carried out by the ATLAS and CMS collaborations at centre-of-mass energies of $\\sqrt{s}=7$ and $8$ TeV from the combined LHC Run I datasets. A wide range of analysis strategies are employed in a number of channels. Measurements of both the top quark pole mass and $m_{top}$ as defined by the Monte Carlo generator in simulated signal samples are shown. Finally, a summary of combinations of the LHC measurements is presented, together with a look toward top quark mass measurements at $\\sqrt{s}=13$ TeV.

  1. Top-Down Influence in Young Children's Linguistic Ambiguity Resolution

    Science.gov (United States)

    Rabagliati, Hugh; Pylkkanen, Liina; Marcus, Gary F.

    2013-01-01

    Language is rife with ambiguity. Do children and adults meet this challenge in similar ways? Recent work suggests that while adults resolve syntactic ambiguities by integrating a variety of cues, children are less sensitive to top-down evidence. We test whether this top-down insensitivity is specific to syntax or a general feature of children's…

  2. Top IS research on Quality of Transaction Standards

    NARCIS (Netherlands)

    Folmer, Erwin Johan Albert; Jakobs, Kai; Berends, Wouter; Oude Luttighuis, Paul; Oude luttighuis, P.H.W.M.; van Hillegersberg, Jos

    2009-01-01

    This paper contains the results of a systematic literature review executed to determine the coverage of transaction standards in top information systems (IS) and management journals. Specifically, it aims to identify a research gap with respect to this topic. The top 25 journals are thoroughly

  3. Search for heavy resonances decaying to top quarks

    CERN Document Server

    D'Auria, Saverio; The ATLAS collaboration

    2017-01-01

    Searches for new resonances that decay either to pairs of top quarks or a top and a b-quark are presented. The searches are performed with the ATLAS experiment at the LHC using proton-proton collision data. The invariant mass spectrum of hypothetical resonances are examined for local excesses or deficits that are inconsistent with the Standard Model prediction.

  4. The Psychological Benefits of Superstitious Rituals in Top Sport

    NARCIS (Netherlands)

    M.C. Schippers (Michaéla); P.A.M. van Lange (Paul)

    2005-01-01

    textabstractThe current research addresses the psychological benefits of superstitious rituals in top sport, examining the circumstances under which top-class sportsmen are especially committed to enacting rituals prior to a game (ritual commitment). Consistent with hypotheses, findings revealed

  5. Sheep response to sugar cane tops supplemented with varying ...

    African Journals Online (AJOL)

    Twenty WAD sheep averaging 10.14kg were randomly divided into four groups of 5 replicates, and each group was fed sugarcane tops (SCT) supplemented with varying levels (0%, 25%, 50 and 75%) of Leucaena leucocephala foliage (LLF) in a completely randomized design. Results showed that sugarcane tops (SCT) ...

  6. Slow Manifold and Hannay Angle in the Spinning Top

    Science.gov (United States)

    Berry, M. V.; Shukla, P.

    2011-01-01

    The spin of a top can be regarded as a fast variable, coupled to the motion of the axis which is slow. In pure precession, the rotation of the axis round a cone (without nutation), can be considered as the result of a reaction from the fast spin. The resulting restriction of the total state space of the top is an illustrative example, at…

  7. Generation of shape-invariant flat-top laser beams

    CSIR Research Space (South Africa)

    Ait-Ameur, K

    2015-02-01

    Full Text Available A great number of laser applications need in place of the usual Gaussian beam a flat-top intensity profile in the focal plane of a focusing lens. In general the transformation of the laser beam from the Gaussian to the flat-top shape is made by a...

  8. Top Reconstruction Techniques in 0-Lepton Direct Stop Searches

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Final presentation of my summer research into new and improved methods for identifying top quarks in 6+ jet events with missing transverse energy. Specifically, I will discuss methods I have developed to reconstruct tops, and my future plans for my project in the future.

  9. European top managers’ support for work-life arrangements

    NARCIS (Netherlands)

    Been, Wike M.; van der Lippe, Tanja; den Dulk, Laura; Das Dores Horta Guerreiro, Maria; Kanjuo Mrčela, Aleksandra; Niemistö, Charlotta

    2017-01-01

    Top managers—defined as CEOs, CFOs and members of boards of directors—decide to what degree their organization offers employees work-life arrangements. This study focuses on the conditions under which they support such arrangements. A factorial survey of 202 top managers in five European countries

  10. Recent results on top quark physics with the CMS detector

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The dawn of the LHC Run II brings the prospect of pushing precision in top quark physics to a new level probing further the standard model and beyond. The inclusive production of top quark pairs and single top quarks has been rapidly established with as much as 42/pb of integrated luminosity and has been further probed with increased precision using up to 2.7/fb of proton-proton collision data acquired by the CMS detector during 2015. Inclusive and differential production cross sections of top-quark pairs and single-top quarks have been measured using new selection and top kinematics reconstruction techniques. The results have been compared to several predictions which include the state of the art next-to-leading order matched to parton shower generators as well as several fixed-order theory calculations. In addition the associated production of top quark pairs with a Z boson has also been re-established at 13 TeV. These results re-open the door to an exciting top quark physics programme ahead of us during th...

  11. Identification of Tobacco Topping Responsive Proteins in Roots

    Directory of Open Access Journals (Sweden)

    Hongxiang eGuo

    2016-04-01

    Full Text Available Tobacco plant has many responses to topping, such as the increase in ability of nicotine synthesis and secondary growth of roots. Some topping responsive miRNAs and genes had been identified in our previous work, but it is not enough to elaborate mechanism of tobacco response to topping. Here, topping responsive proteins were screened from tobacco roots with two-dimensional electrophoresis. Of these proteins, calretulin (CRT and Auxin-responsive protein IAA9 were related to the secondary growth of roots, LRR disease resistance, heat shock protein 70 and farnesyl pyrophosphate synthase 1(FPPS)were involved in wounding stress response, and F-box protein played an important role in promoting the ability of nicotine synthesis after topping. In addition, there were five tobacco bHLH proteins (NtbHLH, NtMYC1a, NtMYC1b, NtMYC2a and NtMYC2b related to nicotine synthesis. It was suggested that NtMYC2 might be the main positive transcription factor and NtbHLH protein is a negative regulator in the JA-mediating activation of nicotine synthesis after topping. Tobacco topping activates some comprehensive biology processes involving IAA and JA signaling pathway, and the identification of these proteins will be helpful to understand the process of topping response.

  12. Stereoscopic, thermal, and true deep cumulus cloud top heights

    Science.gov (United States)

    Llewellyn-Jones, D. T.; Corlett, G. K.; Lawrence, S. P.; Remedios, J. J.; Sherwood, S. C.; Chae, J.; Minnis, P.; McGill, M.

    2004-05-01

    We compare cloud-top height estimates from several sensors: thermal tops from GOES-8 and MODIS, stereoscopic tops from MISR, and directly measured heights from the Goddard Cloud Physics Lidar on board the ER-2, all collected during the CRYSTAL-FACE field campaign. Comparisons reveal a persistent 1-2 km underestimation of cloud-top heights by thermal imagery, even when the finite optical extinctions near cloud top and in thin overlying cirrus are taken into account. The most severe underestimates occur for the tallest clouds. The MISR "best-sinds" and lidar estimates disagree in very similar ways with thermally estimated tops, which we take as evidence of excellent performance by MISR. Encouraged by this, we use MISR to examine variations in cloud penetration and thermal top height errors in several locations of tropical deep convection over multiple seasons. The goals of this are, first, to learn how cloud penetration depends on the near-tropopause environment; and second, to gain further insight into the mysterious underestimation of tops by thermal imagery.

  13. Terascale Optimal PDE Simulations (TOPS) Center

    Energy Technology Data Exchange (ETDEWEB)

    Professor Olof B. Widlund

    2007-07-09

    .g., illustrated in [24, 25, 26]. This work is based on [29, 31]. Our work over these five and half years has, in our opinion, helped advance the knowledge of domain decomposition methods significantly. We see these methods as providing valuable alternatives to other iterative methods, in particular, those based on multi-grid. In our opinion, our accomplishments also match the goals of the TOPS project quite closely.

  14. Approximate spatio-temporal top-k publish/subscribe

    KAUST Repository

    Chen, Lisi; Shang, Shuo

    2018-01-01

    Location-based publish/subscribe plays a significant role in mobile information disseminations. In this light, we propose and study a novel problem of processing location-based top-k subscriptions over spatio-temporal data streams. We define a new type of approximate location-based top-k subscription, Approximate Temporal Spatial-Keyword Top-k (ATSK) Subscription, that continuously feeds users with relevant spatio-temporal messages by considering textual similarity, spatial proximity, and information freshness. Different from existing location-based top-k subscriptions, Approximate Temporal Spatial-Keyword Top-k (ATSK) Subscription can automatically adjust the triggering condition by taking the triggering score of other subscriptions into account. The group filtering efficacy can be substantially improved by sacrificing the publishing result quality with a bounded guarantee. We conduct extensive experiments on two real datasets to demonstrate the performance of the developed solutions.

  15. Single top quark production with ATLAS and CMS

    CERN Document Server

    Finelli, Kevin Daniel; The ATLAS collaboration

    2015-01-01

    Measurements of single top-quark production in proton proton collisions at 7 and 8 TeV are presented. In the leading order process, a W boson is exchanged in the t-channel. The single top-quark and anti-top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. In addition, a measurement of the production cross section of a single top quark in association with a W boson is presented. All measurements are compared to state-of-the-art theoretical calculations and the CKM matrix element |Vtb| is determined. In addition, the s-channel production is explored and limits on exotic production in single top quark processes are discussed. This includes the search for flavor changing neutral currents and the search for additional W’ bosons or a search for monotops.

  16. Search strategies for top partners in composite Higgs models

    Science.gov (United States)

    Gripaios, Ben; Müller, Thibaut; Parker, M. A.; Sutherland, Dave

    2014-08-01

    We consider how best to search for top partners in generic composite Higgs models. We begin by classifying the possible group representations carried by top partners in models with and without a custodial SU(2) × SU(2) ⋊ 2 symmetry protecting the rate for Z → decays. We identify a number of minimal models whose top partners only have electric charges of , , or and thus decay to top or bottom quarks via a single Higgs or electroweak gauge boson. We develop an inclusive search for these based on a top veto, which we find to be more effective than existing searches. Less minimal models feature light states that can be sought in final states with like-sign leptons and so we find that 2 straightforward LHC searches give a reasonable coverage of the gamut of composite Higgs models.

  17. Signatures of top flavour-changing dark matter

    International Nuclear Information System (INIS)

    Hondt, Jorgen d'; Mariotti, Alberto; Moortgat, Seth; Tziveloglou, Pantelis

    2015-12-01

    We develop the phenomenology of scenarios in which a dark matter candidate interacts with a top quark through flavour-changing couplings, employing a simplified dark matter model with an s-channel vector-like mediator. We study in detail the top-charm flavour-changing interaction, by investigating the single top plus large missing energy signature at the LHC as well as constraints from the relic density and direct and indirect dark matter detection experiments. We present strategies to distinguish between the top-charm and top-up flavour-changing models by taking advantage of the lepton charge asymmetry as well as by using charm-tagging techniques on an extra jet. We also show the complementarity between the LHC and canonical dark matter experiments in exploring the viable parameter space of the models.

  18. Approximate spatio-temporal top-k publish/subscribe

    KAUST Repository

    Chen, Lisi

    2018-04-26

    Location-based publish/subscribe plays a significant role in mobile information disseminations. In this light, we propose and study a novel problem of processing location-based top-k subscriptions over spatio-temporal data streams. We define a new type of approximate location-based top-k subscription, Approximate Temporal Spatial-Keyword Top-k (ATSK) Subscription, that continuously feeds users with relevant spatio-temporal messages by considering textual similarity, spatial proximity, and information freshness. Different from existing location-based top-k subscriptions, Approximate Temporal Spatial-Keyword Top-k (ATSK) Subscription can automatically adjust the triggering condition by taking the triggering score of other subscriptions into account. The group filtering efficacy can be substantially improved by sacrificing the publishing result quality with a bounded guarantee. We conduct extensive experiments on two real datasets to demonstrate the performance of the developed solutions.

  19. Measurements of top-quark properties at the LHC

    CERN Document Server

    Beernaert, Kelly Simone

    2015-01-01

    Measurements of several top-quark properties are presented, obtained from the ATLAS and CMS data collected in 2011 and 2012 at centre-of-mass energies of 7 and 8 TeV. The results include measurements of the top pair charge asymmetry, the top quark polarization in pair production and single top production, the W helicity in top decays. Results of spin correlation in topquark pairs are presented and interpreted in terms of the SM predicted values. The results are compared with predictions from the standard model as well as new physics models. The cross section of ttbar events produced in association with a W, Z boson or a photon is also presented.

  20. Signatures of top flavour-changing dark matter

    Energy Technology Data Exchange (ETDEWEB)

    Hondt, Jorgen d' ; Mariotti, Alberto; Moortgat, Seth; Tziveloglou, Pantelis [Vrieje Univ. Brussel (Belgium). Theoretische Natuurkunde and IIHE/ELEM; Mawatari, Kentarou [Vrieje Univ. Brussel (Belgium). Theoretische Natuurkunde and IIHE/ELEM; Grenoble-Alpes Univ., CNRS/IN2P3 (France). Lab. de Physique Subatomique et de Cosmologie; Onsem, Gerrit van [Vrieje Univ. Brussel (Belgium). Theoretische Natuurkunde and IIHE/ELEM; Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2015-12-15

    We develop the phenomenology of scenarios in which a dark matter candidate interacts with a top quark through flavour-changing couplings, employing a simplified dark matter model with an s-channel vector-like mediator. We study in detail the top-charm flavour-changing interaction, by investigating the single top plus large missing energy signature at the LHC as well as constraints from the relic density and direct and indirect dark matter detection experiments. We present strategies to distinguish between the top-charm and top-up flavour-changing models by taking advantage of the lepton charge asymmetry as well as by using charm-tagging techniques on an extra jet. We also show the complementarity between the LHC and canonical dark matter experiments in exploring the viable parameter space of the models.

  1. Recent results on top quark physics with the CMS detector

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Top quarks are produced abundantly at the LHC due to the large cross section, high luminosity and outstanding performance of the accelerator chain. These unique conditions have opened the door to precise measurements of the top quark cross section, the top quark's peculiar properties and to searches for new physics in the top quark sector. In this seminar, recent top quark measurements performed by the CMS experiment will be reviewed. The measurements are based on the data collected at center-of-mass energies of 7, 8 and 13 TeV. Special emphasis will be given to the latest inclusive cross section measurements including those that analyse the data taken after the restart of the LHC.

  2. White top emitting OLED with angle independent emission characteristic

    Energy Technology Data Exchange (ETDEWEB)

    Thomschke, Michael; Freitag, Patricia; Schwartz, Gregor; Nitsche, Robert; Walzer, Karsten; Leo, Karl [Technische Universitaet Dresden, Institut fuer Angewandte Photophysik, Georg-Baehr-Strasse 1, 01062 Dresden (Germany)

    2008-07-01

    The general device structure of a top emitting organic light emitting diode (OLED) consists of several organic layers sandwiched in between two metal contacts, with the top one being semitransparent for light outcoupling reasons. Due to the high reflectivity of the electrodes, strong microcavity effects occur which lead to a preferred emission of light of a certain wavelength with main outcoupling in forward direction. This creates rather narrow emission bands, accompanied by strong spectral shifts upon viewing angle variation. By using an organic capping layer on top of the semitransparent metal contact, this unwanted effect can be reduced. This is important especially for white light emission for the use of OLEDs in future lighting applications. Our optical simulations show that the strong angular dependence of the emission color almost vanishes. To verify the simulations we study white top emitting OLEDs based on an approach which are adapted to the top emitting case.

  3. Entangling Higgs production associated with a single top and a top-quark pair in the presence of anomalous top-Yukawa coupling

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jung [Physics Division, National Center for Theoretical Sciences,Hsinchu, Taiwan (China); Cheung, Kingman [Physics Division, National Center for Theoretical Sciences,Hsinchu, Taiwan (China); Division of Quantum Phases and Devices, School of Physics, Konkuk University,Seoul 143-701 (Korea, Republic of); Department of Physics, National Tsing Hua University,Hsinchu 300, Taiwan (China); Lee, Jae Sik [Physics Division, National Center for Theoretical Sciences,Hsinchu, Taiwan (China); Department of Physics, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwangju, 500-757 (Korea, Republic of); Lu, Chih-Ting [Department of Physics, National Tsing Hua University,Hsinchu 300, Taiwan (China)

    2017-04-26

    The ATLAS and CMS collaborations observed a mild excess in the associated Higgs production with a top-quark pair (tt̄h) and reported the signal strengths of μ{sub tth}{sup ATLAS}=1.81±0.80 and μ{sub tth}{sup CMS}=2.75±0.99 based on the data collected at √s= 7 and 8 TeV. Although, at the current stage, there is no obvious indication whether the excess is real or due to statistical fluctuations, here we perform a case study of this mild excess by exploiting the strong entanglement between the associated Higgs production with a single top quark (thX) and tt̄h production in the presence of anomalous top-Yukawa coupling. As well known, tt̄h production only depends on the absolute value of the top-Yukawa coupling. Meanwhile, in thX production, this degeneracy is lifted through the strong interference between the two main contributions which are proportional to the top-Yukawa and the gauge-Higgs couplings, respectively. Especially, when the relative sign of the top-Yukawa coupling with respect to the gauge-Higgs coupling is reversed, the thX cross section can be enhanced by more than one order of magnitude. We perform a detailed study of the influence of thX production on tt̄h production in the presence of the anomalous top-Yukawa coupling and point out that it is crucial to include thX production in the analysis of the tt̄h data to pin down the sign and the size of the top-Yukawa coupling in future. While assuming the Standard Model (SM) value for the gauge-Higgs coupling, we vary the top-Yukawa coupling within the range allowed by the current LHC Higgs data. We consider the Higgs decay modes into multileptons, bb̄ and γγ putting a particular emphasis on the same sign dilepton events. We also discuss the prospects for the LHC Run-2 on how to disentangle thX production from tt̄h one and how to probe the anomalous top-Yukawa coupling.

  4. Search for the associate production of Higgs bosons with top anti-top pairs

    Energy Technology Data Exchange (ETDEWEB)

    Agnew, James Paul [Univ. of Manchester (United Kingdom)

    2013-01-01

    This thesis describes the search for the associated production of a Higgs boson with top anti-top pairs in proton anti-proton collisions at a centre-of-mass energy of 1.96 TeV. The data used were collected by the D0 detector during the RunII data taking period which ran from 2001 to 2011 at the Tevatron Collider located at the Fermi National Accelerator Laboratory (or Fermilab). Distributions of theHT variable separated into 3 jet, 5 b-tagging and 2 lepton categories were used as inputs to a modified frequentist limit setting procedure, which was in turn used to search for the t$\\bar{t}$H process with H→b$\\bar{b}$. Since this process was not observed, limits were set on the cross section times branching ratio σ(t$\\bar{t}$H) BR(H → b$\\bar{b}$) , with an expected (observed) limit of 24.7 (74.3) measured for a Higgs mass value of 125 GeV.

  5. Studies of top quark production at D0

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Cecilia E.; /Illinois U., Chicago

    2011-07-01

    I present recent results on top quark production in pp collisions at a center of mass energy of 1.96 TeV. The studies were performed by the D0 collaboration using approximately 5 fb{sup -1} of data taken during Run II at the Fermilab Tevatron accelerator. The top quark is the heaviest known elementary particle and completes the quark sector of the three-generation structure of the standard model (SM). It differs from the other quarks not only by its much larger mass, but also by its lifetime which is too short to build hadronic bound states. The SM predicts that top quarks are created via two independent production mechanisms at hadron colliders. The primary mode, in which a t{bar t} pair is produced from a gtt vertex via the strong interaction, was used by the D0 and CDF collaborations to establish the existence of the top quark in 1995. The second production mode of top quarks at hadron colliders is the electroweak production of a single top quark from a Wtb vertex. The predicted cross section for single top quark production is about half that of t{bar t} pairs but the signal-to-background ratio is much worse; observation of single top quark production has therefore until recently been impeded by its low rate and difficult background environment compared to the top pair production. In the following sections I will present results for the measurement of the t{bar t} pair and the single top quark production cross section using respectively 5.3 fb{sup -1} and 5.4 fb{sup -1} of data taken by the D0 experiment.

  6. Composições tecidual e química do lombo de cordeiros alimentados com rações contendo semente de girassol em comedouros privativos Tissue and chemical compositions of loin from lambs fed sunflower seed in creep feeding

    Directory of Open Access Journals (Sweden)

    Vicente de Paulo Macedo

    2008-10-01

    .98 and 21.18% of CP and were ad libitum fed to the lambs. The lambs were weighed every 14 days and kept with the ewe until they reach the pre-established slaughter body weight (28 kg. The carcasses were chilling in cold chamber at 5°C for 24 hours, and then were split into seven anatomical regions for collection of the left and right loins and obtention of the variables: measures of L. Dorsi muscle, weight of the loin components (muscle, bone and fat; chemical composition and profile of fatty acids of muscle, bone and fat. The sunflower seed influenced total loin weight, muscle and connective tissue weights and connective tissue yield. The increase in sunflower seed percentage in the diet decreased the amount of lauric acid and palmitic (saturated, and increased oleic and linoleic acids (unsaturated. The nutritional quality of meat of lamb improves with increased use of sunflower seed in the diet.

  7. Measurements of the top quark mass with the ATLAS detector

    CERN Document Server

    Nisius, Richard; The ATLAS collaboration

    2017-01-01

    The measurements of the top quark mass given are obtained from ATLAS data taken at proton--proton centre-of-mass energies of $\\sqrt{s}=7$ and $8$ TeV. An extraction of the top quark pole mass ($m_{\\mathrm{top}}^{\\mathrm{pole}}$) at next-to-leading order (NLO) is presented. This result is obtained from normalised differential cross-sections in the $t\\bar{t}\\to\\mbox{dilepton}$ channel leading to: $m_{\\mathrm{top}}^{\\mathrm{pole}} = 173.2 \\pm 0.9 (\\mathrm{stat.}) \\pm 0.8 (\\mathrm{syst.}) \\pm 1.2 (\\mathrm{theo.})$ GeV. In addition, measurements of $m_{\\mathrm{top}}$ are discussed that are based on the template method performed in three $t\\bar{t}$ decay channels. For all results the uncertainty is dominated by systematic effects. Finally, the 2016 ATLAS combined value of $m_{\\mathrm{top}}$ is: $m_{\\mathrm{top}}=172.84 \\pm 0.34 (\\mathrm{stat.}) \\pm 0.61 (\\mathrm{syst.})$ GeV, with a total uncertainty of 0.70 GeV, i.e.a precision of 0.4$\\%$.

  8. Playing tag with ANN: boosted top identification with pattern recognition

    International Nuclear Information System (INIS)

    Almeida, Leandro G.; Backović, Mihailo; Cliche, Mathieu; Lee, Seung J.; Perelstein, Maxim

    2015-01-01

    Many searches for physics beyond the Standard Model at the Large Hadron Collider (LHC) rely on top tagging algorithms, which discriminate between boosted hadronic top quarks and the much more common jets initiated by light quarks and gluons. We note that the hadronic calorimeter (HCAL) effectively takes a “digital image" of each jet, with pixel intensities given by energy deposits in individual HCAL cells. Viewed in this way, top tagging becomes a canonical pattern recognition problem. With this motivation, we present a novel top tagging algorithm based on an Artificial Neural Network (ANN), one of the most popular approaches to pattern recognition. The ANN is trained on a large sample of boosted tops and light quark/gluon jets, and is then applied to independent test samples. The ANN tagger demonstrated excellent performance in a Monte Carlo study: for example, for jets with p T in the 1100–1200 GeV range, 60% top-tag efficiency can be achieved with a 4% mis-tag rate. We discuss the physical features of the jets identified by the ANN tagger as the most important for classification, as well as correlations between the ANN tagger and some of the familiar top-tagging observables and algorithms.

  9. Top quark mass and properties measurements with the ATLAS detector

    CERN Document Server

    Moreno Llacer, Maria; The ATLAS collaboration

    2018-01-01

    The top quark is the heaviest elementary particle and unique among the known quarks since it decays before forming hadronic bound states. This makes measurements of its properties particularly interesting as one can access directly the properties of a bare quark. The latest measurements of these properties with the ATLAS detector are reported using 8 TeV and 13 TeV data of proton-proton collisions from the Large Hadron Collider at CERN laboratory. Measurements of the top quark decay width, top quark spin observables and $W$ boson helicity in events with top quark pairs ($t\\bar{t}$) are presented and compared to the Standard Model predictions. The cross-section measurements of top quark pairs production in association with photons, $Z$ or $W$ bosons is also presented and compared to the most accurate theoretical calculations. These measurements probe the top quark electroweak couplings. Limits on the rate of flavour changing neutral currents in the production or decay of the top quark are also reported. In add...

  10. Playing tag with ANN: boosted top identification with pattern recognition

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Leandro G. [Institut de Biologie de l’École Normale Supérieure (IBENS), Inserm 1024- CNRS 8197,46 rue d’Ulm, 75005 Paris (France); Backović, Mihailo [Center for Cosmology, Particle Physics and Phenomenology - CP3,Universite Catholique de Louvain,Louvain-la-neuve (Belgium); Cliche, Mathieu [Laboratory for Elementary Particle Physics, Cornell University,Ithaca, NY 14853 (United States); Lee, Seung J. [Department of Physics, Korea Advanced Institute of Science and Technology,335 Gwahak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); School of Physics, Korea Institute for Advanced Study,Seoul 130-722 (Korea, Republic of); Perelstein, Maxim [Laboratory for Elementary Particle Physics, Cornell University,Ithaca, NY 14853 (United States)

    2015-07-17

    Many searches for physics beyond the Standard Model at the Large Hadron Collider (LHC) rely on top tagging algorithms, which discriminate between boosted hadronic top quarks and the much more common jets initiated by light quarks and gluons. We note that the hadronic calorimeter (HCAL) effectively takes a “digital image' of each jet, with pixel intensities given by energy deposits in individual HCAL cells. Viewed in this way, top tagging becomes a canonical pattern recognition problem. With this motivation, we present a novel top tagging algorithm based on an Artificial Neural Network (ANN), one of the most popular approaches to pattern recognition. The ANN is trained on a large sample of boosted tops and light quark/gluon jets, and is then applied to independent test samples. The ANN tagger demonstrated excellent performance in a Monte Carlo study: for example, for jets with p{sub T} in the 1100–1200 GeV range, 60% top-tag efficiency can be achieved with a 4% mis-tag rate. We discuss the physical features of the jets identified by the ANN tagger as the most important for classification, as well as correlations between the ANN tagger and some of the familiar top-tagging observables and algorithms.

  11. Stratocumulus Cloud Top Radiative Cooling and Cloud Base Updraft Speeds

    Science.gov (United States)

    Kazil, J.; Feingold, G.; Balsells, J.; Klinger, C.

    2017-12-01

    Cloud top radiative cooling is a primary driver of turbulence in the stratocumulus-topped marine boundary. A functional relationship between cloud top cooling and cloud base updraft speeds may therefore exist. A correlation of cloud top radiative cooling and cloud base updraft speeds has been recently identified empirically, providing a basis for satellite retrieval of cloud base updraft speeds. Such retrievals may enable analysis of aerosol-cloud interactions using satellite observations: Updraft speeds at cloud base co-determine supersaturation and therefore the activation of cloud condensation nuclei, which in turn co-determine cloud properties and precipitation formation. We use large eddy simulation and an off-line radiative transfer model to explore the relationship between cloud-top radiative cooling and cloud base updraft speeds in a marine stratocumulus cloud over the course of the diurnal cycle. We find that during daytime, at low cloud water path (CWP correlated, in agreement with the reported empirical relationship. During the night, in the absence of short-wave heating, CWP builds up (CWP > 50 g m-2) and long-wave emissions from cloud top saturate, while cloud base heating increases. In combination, cloud top cooling and cloud base updrafts become weakly anti-correlated. A functional relationship between cloud top cooling and cloud base updraft speed can hence be expected for stratocumulus clouds with a sufficiently low CWP and sub-saturated long-wave emissions, in particular during daytime. At higher CWPs, in particular at night, the relationship breaks down due to saturation of long-wave emissions from cloud top.

  12. Top quark polarization in t-channel single top-quark events with the ATLAS detector

    CERN Document Server

    Chitishvili, Mariam

    2017-01-01

    This summary presents the measurement of the top‐quark polarization in t-channel single top quarks with the ATLAS detector at the LHC. Monte Carlo simulated events are used. Selected events contain one lepton, large missing transverse momentum and exactly two jets, with one of them identified as b-jet. Selection cuts are used to identify the t-channel topology at reconstruction level. The polarization is measured, from an asymmetry in an angular distribution, at parton level by correcting the reconstructed angular distribution for detector effects. This project provides an overview on how a "standard" physics analysis is performed within ATLAS. The analysis is performed in ROOT. Simulation data is reconstructed to perform an unfolded measurement of a given property of a fundamental particle within the Standard Model. Finally results are compared with theoretical predictions.

  13. Two-loop electroweak top corrections are they under control?

    CERN Document Server

    Degrassi, G.; Feruglio, F.; Gambino, P.; Vicini, A.; Degrassi, G; Fanchiotti, S; Feruglio, F; Gambino, P; Vicini, A

    1995-01-01

    The assumption that two-loop top corrections are well approximated by the O(G_mu^2 mt^4) contribution is investigated. It is shown that in the case of the ratio neutral-to-charged current amplitudes at zero momentum transfer the O(G_mu^2 mt^2 M_Z^2) terms are numerically comparable to the m_t^4 contribution for realistic values of the top mass. An estimate of the theoretical error due to unknown two-loop top effect is presented for a few observables of LEP interest.

  14. Ranking benchmarks of top 100 players in men's professional tennis.

    Science.gov (United States)

    Reid, Machar; Morris, Craig

    2013-01-01

    In men's professional tennis, players aspire to hold the top ranking position. On the way to the top spot, reaching the top 100 can be seen as a significant career milestone. National Federations undertake extensive efforts to assist their players to reach the top 100. However, objective data considering reasonable ranking yardsticks for top 100 success in men's professional tennis are lacking. Therefore, it is difficult for National Federations and those involved in player development to give empirical programming advice to young players. By taking a closer look at the ranking history of professional male tennis players, this article tries to provide those involved in player development a more objective basis for decision-making. The 100 names, countries, birthdates and ranking histories of the top 100 players listed in the Association of Tennis Professionals (ATP) at 31 December 2009 were recorded from websites in the public domain. Descriptive statistics were reported for the ranking milestones of interest. Results confirmed the merits of the International Tennis Federation's junior tour with 91% of the top 100 professionals earning a junior ranking, the mean peak of which was 94.1, s=148.9. On average, top 100 professionals achieved their best junior rankings and earned their first ATP point at similar ages, suggesting that players compete on both the junior and professional tours during their transition. Once professionally ranked, players took an average 4.5, s=2.1 years to reach the ATP top 100 at the mean age of 21.5, s=2.6 years, which contrasts with the mean current age of the top 100 of 26.8, s=3.2. The best professional rankings of players born in 1982 or earlier were positively related to the ages at which players earned their first ATP point and then entered the top 100, suggesting that the ages associated with these ranking milestones may have some forecasting potential. Future work should focus on the change in top 100 demographics over time as well

  15. Multi-Dimensional Top-k Dominating Queries

    DEFF Research Database (Denmark)

    Yiu, Man Lung; Mamoulis, Nikos

    2009-01-01

    The top-k dominating query returns k data objects which dominate the highest number of objects in a dataset. This query is an important tool for decision support since it provides data analysts an intuitive way for finding significant objects. In addition, it combines the advantages of top......-k and skyline queries without sharing their disadvantages: (i) the output size can be controlled, (ii) no ranking functions need to be specified by users, and (iii) the result is independent of the scales at different dimensions. Despite their importance, top-k dominating queries have not received adequate...

  16. Rig`s electricity to power top drive drilling system

    Energy Technology Data Exchange (ETDEWEB)

    Liderth, D.

    1996-05-01

    Permanent magnet brushless electric motors to supply torque to more space-efficient top drive drilling assemblies was the solution designed by Kaman Electromagnetic Corporation, working hand-in-hand with Calgary-based Tesco Drilling Technology, to remedy problems created by the bulkiness of standard hydraulic top drive systems. The biggest advantage of using electric over hydraulic top drive systems is the ability to tap into the rig`s existing power source, which lowers both cost and effort. A better power to weight ratio and reduced maintenance requirements are other desirable advantages.

  17. Measurement of the top quark mass at D0

    International Nuclear Information System (INIS)

    Protopopescu, S.

    1996-01-01

    The mass of the top quark is measured using a sample of 93 lepton + 4 or more jets events collected with the D0 detector at the FNAL Tevatron collider. The authors find the top quark mass is 169 ± 8(stat.) ± 8(syst.) GeV/c 2 . The analysis assumes that top quarks are produced as t anti t pairs that decay to W bosons and b quarks. The final states result when one W decays to eν or μν and the other W to q anti q. More than four jets may be present because of final and initial state radiation

  18. The CDF top search in the multijet decay mode

    International Nuclear Information System (INIS)

    Denby, B.

    1994-01-01

    A status report on the CDF top search in the multijet channel is given. After topological cuts and the requirement of a secondary vertex in the silicon microvertex detector, about 120 events remain (21.4 pb -1 ), in which the signal to background ratio (for a nominal top mass of 160 GeV) is estimated to be 1/10. With further improvements it should be possible to improve this ratio to 1/1 while retaining good efficiency for top, which will make the multijet channel an important cross check for the leptonic modes

  19. Measurements of the top quark mass with the ATLAS detector

    CERN Document Server

    Brandt, Oleg; The ATLAS collaboration

    2018-01-01

    The top quark mass is one of the fundamental parameters of the Standard Model. The latest ATLAS measurements of the top quark mass are presented. A measurement using lepton+jets events is presented, where a multidimensional template fit is used to constrain the uncertainties on the energy measurements of jets. The measurement is combined with a measurement using dilepton events. In addition, novel measurements aiming to measure the mass in a welldefined scheme are presented. These measurements use precision theoretical QCD calculations for both inclusive ttbar production and ttbar production with an additional jet to extract the top quark mass in the polemass scheme.

  20. Lääne-Virumaa ettevõtete TOP aastal 2004

    Index Scriptorium Estoniae

    2005-01-01

    Tabelid: Lääne-Virumaa ettevõtete TOP 50; Käibe TOP 35; Kasumi TOP 35; Lääne-Virumaa ettevõtete üld- ja finantsandmed; Käibe kasvu TOP 20; Kasumi kasvu TOP 20; Rentaabluse TOP 20; Omakapitali tootlikkuse TOP 20. Vt. samas: Viktor Sepp, Merike Lees. Lääne-Virumaal üllatavad uued tegijad

  1. Experimental results with boosted top quarks in the final state

    CERN Document Server

    Erdmann, Johannes

    2014-01-01

    An overview of analyses using data at sqrt(s) = 7 TeV and 8 TeV of proton-proton collisions at the LHC is presented. These analyses use boosted techniques to search for new phenomena involving top quarks and to measure the production of top quarks at high transverse momenta. Such techniques involve top-quark tagging algorithms, boson-tagging algorithms, and strategies for b-tagging and lepton identification in the environment where the top quark decay products are close to each other. The strategies are optimized for the different final states and for different ranges of the transverse momenta of the particles involved, improving on traditional resolved analysis strategies.

  2. Measurements of the top-quark properties at CMS

    Directory of Open Access Journals (Sweden)

    Jafari Abideh

    2013-11-01

    Full Text Available We present different measurements of the top quark properties in production and decay. The measurements are performed using the LHC proton-proton (pp collisions at 7 TeV and 8 TeV center-of-mass energies collected by the CMS detector during 2011 and 2012 runs, respectively. The study of production properties consists of charge asymmetry, tt¯$tar t$ spin correlation and the vector boson associated production of tt¯$tar t$. The top quark properties in decay are studied via the measurement of the b-quark content, R = ℬ(t → Wb/ℬ(t → Wq, the top quark charge, the FCNC process of t → Zq and the W-helicity fractions. The results of the last measurement are used to set limits on the tWb anomalous couplings. The W-helicity fractions are measured in the electroweakly produced (single- top quarks, too.

  3. Top quark properties measurements with the ATLAS detector

    CERN Document Server

    Span\\`o, Francesco; The ATLAS collaboration

    2017-01-01

    Precise measurements of the properties of the top quark test the Standard Model (SM) and can be used to constrain new physics models. As it may be significantly enhanced by the presence of new physics, the $t\\overline{t}$ production charge asymmetry is measured inclusively and differentially using the 8 TeV ATLAS dataset using both the lepton+jets and dilepton channels, including a dedicated measurement for highly boosted top quarks. In the SM the top quark is predicted to decay almost exclusively into W boson and a $b$-quark. Measurements of the W-helicity and spin correlations in $t\\overline{t}$ production are presented as well as new measurements of CP asymmetries in $b$-hadron decays using top-quark events.

  4. Top quark properties measurements with the ATLAS detector

    CERN Document Server

    Spano, Francesco; The ATLAS collaboration

    2017-01-01

    Precise measurements of the properties of the top quark test the Standard Model (SM) and can be used to constrain new physics models. As it may be significantly enhanced by the presence of new physics, the ttbar production charge asymmetry is measured inclusively and differentially using the 8 TeV ATLAS dataset using both the lepton+jets and dilepton channels, including a dedicated measurement for highly boosted top-quarks. In the SM the top-quark is predicted to decay almost exclusively into a W boson and a b-quark. Measurements of the W-helicity and spin correlations in ttbar production are presented as well as new measurements of CP asymmetries in b-hadron decays using top-quark events.

  5. Workshop on Top mass: challenges in definition and determination

    CERN Document Server

    2015-01-01

    The top-quark mass definition and determination is a major subject of debate in both theoretical and experimental communities. Different strategies to relate the measured and theoretical quantities have been envisaged. The aim of this 3-day meeting is to convene experts on this topic to stimulate an informal discussion on different aspects of the issue. We plan to have only three or four talks each day, and plenty of time to discuss the connection between the experimentally reconstructed top mass relying on Monte Carlo generators and different theoretical mass definitions, including the most advanced strategies. Implications of the top-mass determination for physics beyond the standard model will be also covered. The general approach and format will be pedagogical, the audience ranging from top-quark physics experts to graduate students, and should favour extended discussion among participants.

  6. Analytic solutions for neutrino momenta in decay of top quarks

    Energy Technology Data Exchange (ETDEWEB)

    Betchart, Burton A., E-mail: bbetchar@pas.rochester.edu; Demina, Regina, E-mail: regina@pas.rochester.edu; Harel, Amnon, E-mail: amnon.harel@cern.ch

    2014-02-01

    We employ a geometric approach to analytically solve equations of constraint on the decay of top quarks involving leptons. The neutrino momentum is found as a function of the 4-vectors of the associated bottom quark and charged lepton, the masses of the top quark and W boson, and a single parameter, which constrains it to an ellipse. We show how the measured imbalance of momenta in the event reduces the solutions for neutrino momenta to a discrete set, in the cases of one or two top quarks decaying to leptons. The algorithms can be implemented concisely with common linear algebra routines. -- Highlights: • Neutrino momentum from top quark decay is constrained to an ellipse. • We find analytically the best neutrino momenta given the momentum imbalance. • A reference implementation of the algorithms is included.

  7. Constraints on unparticles from top properties measured at Tevatron

    International Nuclear Information System (INIS)

    Islam, Rashidul; Dahiya, Mamta; Dutta, Sukanta

    2013-01-01

    We discuss the recent observations of the top pair production at Tevatron through flavor conserving and flavor violating channels via vector and tensor unparticles. The unparticle sector is considered to be a color singlet or octet. We have used the unparticle propagators modified for full conformal invariance to investigate the contribution of these unparticles to the observed forward backward asymmetry and the spin correlation in top pair production at Tevatron. We also discuss the impact of the flavor violating couplings of unparticles to the third generation quarks on (a) pair production of same sign tops/antitops at TeVatron and (b) the partial top decay width for Γ u (t → uU V )

  8. Treating Cataracts: Dr. Rachel Bishop's Top Tips for Your Eyes

    Science.gov (United States)

    ... please turn JavaScript on. Feature: Treating Cataracts Dr. Rachel Bishop's Top Tips for Your Eyes Past Issues / ... exams, a healthy lifestyle, and eye protection. Dr. Rachel Bishop, chief of consult services at the National ...

  9. The top quark physics of the final flavor

    CERN Document Server

    Franklin, Melissa

    1996-01-01

    This will be a series of lectures concerning the recent discovery of the top quark. These lectures will cover things I have learned from hanging around proton anti-proton colliders for the past 15 years, including : Proton colliders, top quark production and decay kinematics.The D0 and CDF detectors : the finer points. Identifying W's and b quark jets. Jet spectroscopy : measuring masses with jets. Jet spectroscopy : measuring masses with jets. Scrutinizing events in which real W's are produced : the counting experiments with the CDF and D0 detectors at Fermilab. Checking the kinematics and measuring the mass and cross-section. Doing spot checks : is it a W, is there another W, is it a b, are they from top ? Seeing if top fits into the rest of the so-called Standard Model (circa 1995) My future

  10. Statistical and systematic treatment issues in top quark mass combinations

    CERN Document Server

    Maier, Andreas Alexander; The ATLAS collaboration

    2015-01-01

    The past years have seen tremendous improvements in the precision of top quark mass measurements at hadron colliders. Since these measurements are mostly limited by systematic uncertainties, the achievable precision of a single measurement depends on developments in the experimental and theoretical understanding of top quark events. Complementing these efforts, a precision gain can also be obtained by a combination of measurements, exploiting their correlation. With ever increasing precision of single experiment top quark mass measurements, this approach becomes more and more promising, because the absolute precision gain of refined techniques in both theory and experiment tends to saturate. This requires a precise matching of uncertainty categories and a detailed evaluation of the correlations of observables. This article reviews the status and points out the challenges faced in the ATLAS and CMS LHC top quark mass combination effort.

  11. Study on Charged Top-Pion Decay Processes

    Institute of Scientific and Technical Information of China (English)

    WANG Xue-Lei; XU Wen-Na; DU Lin-Lin

    2004-01-01

    In the framework of top-color assisted technicolor (TC2) theory, we study the four decay processes of charged top-pion, i.e., П+t → t-b, П+t → c-b, П+t → W+γ П+t → W+ Z0. The decay branching ratio of these modes are calculated. The results show that the main decay channels of charged top-pion are the tree level modes: П+t → t-b and П+t → c-b. Light П+t is easier to be detected than heavy one at future coliders. So, the study provides us with some useful informations to search for charged top-pion.

  12. Single top quark production in ATLAS at the LHC

    Directory of Open Access Journals (Sweden)

    Stillings Jan A.

    2013-11-01

    Full Text Available Measurements of the single top quark production cross-sections in proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The single top-quark production in the t and Wt-channels and the determination of the CKM matrix element |Vtb| are discussed. A separate measurement of the top and antitop quark cross-sections and their ratio is shown. These measurements are sensitive to the parton distribution function in the proton. In addition, limits on exotic production in single top quark processes are outlined. This also includes the search for flavour-changing neutral currents and for additional W’ bosons in the s-channel.

  13. Top partner-resonance interplay in a composite Higgs framework

    Science.gov (United States)

    Yepes, Juan; Zerwekh, Alfonso

    2018-04-01

    Guided us by the scenario of weak scale naturalness and the possible existence of exotic resonances, we have explored in a SO(5) Composite Higgs setup the interplay among three matter sectors: elementary, top partners and vector resonances. We parametrize it through explicit interactions of spin-1 SO(4)-resonances, coupled to the SO(5)-invariant fermionic currents and tensors presented in this work. Such invariants are built upon the Standard Model fermion sector as well as top partners sourced by the unbroken SO(4). The mass scales entailed by the top partner and vector resonance sectors will control the low energy effects emerging from our interplaying model. Its phenomenological impact and parameter spaces have been considered via flavor-dijet processes and electric dipole moments bounds. Finally, the strength of the Nambu-Goldstone symmetry breaking and the extra couplings implied by the top partner mass scales are measured in accordance with expected estimations.

  14. Top priorities of Canadian and American policymakers for conservation science

    Science.gov (United States)

    We summarize the content of America's "top 40" conservation research questions and how they can inform policy and management needs that emerged from informal interviews with senior policymakers and other decision makers

  15. The semiclassical density of states for the quantum asymmetric top

    International Nuclear Information System (INIS)

    Agnew, Alfonso; Bourget, Alain

    2008-01-01

    In the quantization of a rotating rigid body, a top, one is concerned with the Hamiltonian operator L α = α 2 0 L 2 x + α 2 1 L 2 y + α 2 2 L 2 z , where α 0 ≤ α 1 ≤ α 2 . An explicit formula is known for the eigenvalues of L α in the case of the spherical top (α 1 = α 2 = α 3 ) and symmetrical top (α 1 = α 2 ≠ α 3 ) (Landau and Lifshitz 1981 Quantum Mechanics: Non-Relativistic Theory 3rd edn (Portsmouth, NH: Butterworth-Heinemann)). However, for the asymmetrical top, no such explicit expression exists, and the study of the spectrum is much more complex. In this paper, we compute the semiclassical density of states for the eigenvalues of the family of operators L α = α 2 0 L 2 x + α 2 1 L 2 y + α 2 2 L 2 z for any α 0 1 2

  16. And the Top Honor Goes to Voc Ed.

    Science.gov (United States)

    Hettinger, James

    1998-01-01

    Ray Chelewski is the first vocational-technical educator to win Walt Disney's top teaching honor. Chelewski is an agriculture teacher at the Presque Isle Regional Technology Center in northeast Maine. (JOW)

  17. Report of the subgroup on the top quark

    International Nuclear Information System (INIS)

    Barnett, R.M.; Galtieri, A.B.; Hinchliffe, I.; Palounek, A.; Wacker, K.; Kauffman, R.; Trost, H.-J.; Yuan, C.-P.; Klein, S.; May, H.; Partridge, R.; Gunion, J.F.; Haber, H.E.; Hubbaard, B.; Bhat, P.; Giele, W.; Para, A.; Bay, A.; Margolis, B.; Trottier, H.; Cahill, K.; Thun, R.; Nodulman, L.; Paige, F.

    1990-01-01

    The top group studied discovery issues at the Tevatron as well as measurements to be made at LHC and SSC. Mass measurements, branching ratios, distributions and other issues were studied. 12 refs., 18 figs

  18. Effects of top management involvement in integrated marketing communications

    Directory of Open Access Journals (Sweden)

    Nina Hočevar

    2007-12-01

    Full Text Available There is scarce empirical evidence in the academic literature of how top management involvement influences the degree of integrated marketing communications. At the same time, some authors believe that this relationship should be explored more extensively.In this paper we present one possible approach to investigating the relationship between top management involvement and the degree of integrated marketing communications. Our research established that a greater involvement of top management in marketing communications could be associated with a higher degree of IMC. Investigating the relationship between management and IMC is indeed at a very early stage. We suggest that this study has provided a basis for future research on the relationship between top management involvement in marketing communications and the degree of IMC.

  19. NSF Obligations for Top 200 Institutions by Fiscal Year

    Data.gov (United States)

    National Science Foundation — An text/xml file containing FY 2001 through FY 2015 National Science Foundation (NSF) obligations by institution for the top 200 recipients defined in terms of total...

  20. The top-down reflooding model in the Cathare code

    International Nuclear Information System (INIS)

    Bartak, J.; Bestion, D.; Haapalehto, T.

    1993-01-01

    A top-down reflooding model was developed for the French best-estimate thermalhydraulic code CATHARE. The paper presents the current state of development of this model. Based on a literature survey and on compatibility considerations with respect to the existing CATHARE bottom reflooding package, a falling film top-down reflooding model was developed and implemented into CATHARE version 1.3E. Following a brief review of previous work, the paper describes the most important features of the model. The model was validated with the WINFRITH single tube top-down reflooding experiment and with the REWET - II simultaneous bottom and top-down reflooding experiment in rod bundle geometry. The results demonstrate the ability of the new package to describe the falling film rewetting phenomena and the main parametric trends both in a simple analytical experimental setup and in a much more complex rod bundle reflooding experiment. (authors). 9 figs., 28 refs