A micromagnetic study of the oscillations of pinned domain walls in magnetic ribbons

Energy Technology Data Exchange (ETDEWEB)

Alejos, Oscar [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain)]. E-mail: oscaral@ee.uva.es; Torres, Carlos [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain); Hernandez-Gomez, Pablo [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain); Lopez-Diaz, Luis [Dpto. Fisica Aplicada, Universidad de Salamanca, 37071 Salamanca (Spain); Torres, Luis [Dpto. Fisica Aplicada, Universidad de Salamanca, 37071 Salamanca (Spain); Martinez, Eduardo [Dpto. Ingenieria Electromecanica, Universidad de Burgos, 09001 Burgos (Spain)

2007-09-15

The work studies the dynamics of domain walls in magnetic ribbons with thicknesses of the order of magnitude of the permalloy exchange length (5.7 nm) by means of micromagnetic simulations. Two small defects are symmetrically placed on both edges of the ribbon, one on each edge, occupying the whole ribbon thickness. One transverse domain wall is pinned by the defects, in a head-to-head configuration. A free wall oscillation is forced by applying a static external magnetic field in the direction of the large axis until the wall reaches a new equilibrium position (elongation), and then removed. Three dynamic regimes are observed depending on the size of the cross ribbon section.

A micromagnetic study of the oscillations of pinned domain walls in magnetic ribbons

International Nuclear Information System (INIS)

Alejos, Oscar; Torres, Carlos; Hernandez-Gomez, Pablo; Lopez-Diaz, Luis; Torres, Luis; Martinez, Eduardo

2007-01-01

The work studies the dynamics of domain walls in magnetic ribbons with thicknesses of the order of magnitude of the permalloy exchange length (5.7 nm) by means of micromagnetic simulations. Two small defects are symmetrically placed on both edges of the ribbon, one on each edge, occupying the whole ribbon thickness. One transverse domain wall is pinned by the defects, in a head-to-head configuration. A free wall oscillation is forced by applying a static external magnetic field in the direction of the large axis until the wall reaches a new equilibrium position (elongation), and then removed. Three dynamic regimes are observed depending on the size of the cross ribbon section

Force-field compensation in a manual tracking task.

Directory of Open Access Journals (Sweden)

Valentina Squeri

2010-06-01

Full Text Available This study addresses force/movement control in a dynamic "hybrid" task: the master sub-task is continuous manual tracking of a target moving along an eight-shaped Lissajous figure, with the tracking error as the primary performance index; the slave sub-task is compensation of a disturbing curl viscous field, compatibly with the primary performance index. The two sub-tasks are correlated because the lateral force the subject must exert on the eight-shape must be proportional to the longitudinal movement speed in order to perform a good tracking. The results confirm that visuo-manual tracking is characterized by an intermittent control mechanism, in agreement with previous work; the novel finding is that the overall control patterns are not altered by the presence of a large deviating force field, if compared with the undisturbed condition. It is also found that the control of interaction-forces is achieved by a combination of arm stiffness properties and direct force control, as suggested by the systematic lateral deviation of the trajectories from the nominal path and the comparison between perturbed trials and catch trials. The coordination of the two sub-tasks is quickly learnt after the activation of the deviating force field and is achieved by a combination of force and the stiffness components (about 80% vs. 20%, which is a function of the implicit accuracy of the tracking task.

GMI effect in CuO coated Co-based amorphous ribbons

Energy Technology Data Exchange (ETDEWEB)

Taysioglu, Asli Ayten [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Peksoz, Ahmet, E-mail: peksoz@uludag.edu.t [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaya, Yunus [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Derebasi, Naim [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Irez, Gazi [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaynak, Gokay [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey)

2009-11-13

A Copper oxide (CuO) film has been grown on a surface of Co-based amorphous ribbon using chemical successive ionic layer adsorption and reaction technique, at room temperature and atmosphere pressure. The influence of coating and width of ribbon on giant magneto impedance have been investigated over a frequency range from 0.1 to 3 MHz and under a static magnetic field between -8 and +8 kA/m. The results showed that Co-based amorphous ribbons, which are coated CuO film, have a significant effect on the magnitude and operation frequency for the giant magneto impedance effect as compared to the samples without coating. The highest giant magneto impedance effect was found to be 14.90 on 5 mm width coated ribbon, which is 60% higher than the sample without coating. A surface observation of these samples has been carried out by an atomic force microscope. The AFM images reveal the difference between surfaces of coated and as-cast sample.

GMI effect in CuO coated Co-based amorphous ribbons

International Nuclear Information System (INIS)

Taysioglu, Asli Ayten; Peksoz, Ahmet; Kaya, Yunus; Derebasi, Naim; Irez, Gazi; Kaynak, Gokay

2009-01-01

A Copper oxide (CuO) film has been grown on a surface of Co-based amorphous ribbon using chemical successive ionic layer adsorption and reaction technique, at room temperature and atmosphere pressure. The influence of coating and width of ribbon on giant magneto impedance have been investigated over a frequency range from 0.1 to 3 MHz and under a static magnetic field between -8 and +8 kA/m. The results showed that Co-based amorphous ribbons, which are coated CuO film, have a significant effect on the magnitude and operation frequency for the giant magneto impedance effect as compared to the samples without coating. The highest giant magneto impedance effect was found to be 14.90 on 5 mm width coated ribbon, which is 60% higher than the sample without coating. A surface observation of these samples has been carried out by an atomic force microscope. The AFM images reveal the difference between surfaces of coated and as-cast sample.

75 FR 32186 - Task Force on Community Preventive Services

Science.gov (United States)

2010-06-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Task Force on Community Preventive Services Name: Task Force on Community Preventive Services meeting. Times and Dates: 8... by space available. Purpose: The mission of the Task Force is to develop and publish the Guide to...

75 FR 4402 - Task Force on Community Preventive Services

Science.gov (United States)

2010-01-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Task Force on Community Preventive Services Name: Task Force on Community Preventive Services meeting. Times and Dates: 8..., limited only by space available. Purpose: The mission of the Task Force is to develop and publish the...

Generation Mechanisms of Quasi-parallel and Quasi-circular Flare Ribbons in a Confined Flare

Energy Technology Data Exchange (ETDEWEB)

Hernandez-Perez, Aaron; Thalmann, Julia K.; Veronig, Astrid M.; Dickson, Ewan C. [IGAM/Institute of Physics, University of Graz, A-8010 Graz (Austria); Su, Yang [Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory Chinese Academy of Sciences, 2 West Beijing Road, 210008 Nanjing (China); Gömöry, Peter, E-mail: aaron.hernandez-perez@uni-graz.at [Astronomical Institute, Slovak Academy of Sciences, 05960 Tatranská Lomnica (Slovakia)

2017-10-01

We analyze a confined multiple-ribbon M2.1 flare (SOL2015-01-29T11:42) that originated from a fan-spine coronal magnetic field configuration, within active region NOAA 12268. The observed ribbons form in two steps. First, two primary ribbons form at the main flare site, followed by the formation of secondary ribbons at remote locations. We observe a number of plasma flows at extreme-ultraviolet temperatures during the early phase of the flare (as early as 15 minutes before the onset) propagating toward the formation site of the secondary ribbons. The secondary ribbon formation is co-temporal with the arrival of the pre-flare generated plasma flows. The primary ribbons are co-spatial with Ramaty High Energy Spectroscopic Imager ( RHESSI ) hard X-ray sources, whereas no enhanced X-ray emission is detected at the secondary ribbon sites. The (E)UV emission, associated with the secondary ribbons, peaks ∼1 minute after the last RHESSI hard X-ray enhancement. A nonlinear force-free model of the coronal magnetic field reveals that the secondary flare ribbons are not directly connected to the primary ribbons, but to regions nearby. Detailed analysis suggests that the secondary brightenings are produced due to dissipation of kinetic energy of the plasma flows (heating due to compression), and not due to non-thermal particles accelerated by magnetic reconnection, as is the case for the primary ribbons.

Inter-Association Task Force Report on Image.

Science.gov (United States)

Special Libraries Association, Washington, DC.

In 1988, the Board of Directors of the Special Libraries Association provided funding to a task force to gather data which would determine how certain segments of society perceive librarians, how librarians view themselves and their colleagues, and to provide recommendations for addressing the issue of image. The task force project consisted of…

Childhood Obesity Task Forces Established by State Legislatures, 2001-2010

Science.gov (United States)

Kim, Sonia A.; Sherry, Bettylou; Blanck, Heidi M.

2013-01-01

Introduction States and communities are considering policy and environmental strategies, including enacting legislation, to reduce and prevent childhood obesity. One legislative approach has been to create task forces to understand key issues and develop a course of action. The goal of this study was to describe state-level, childhood obesity task forces in the United States created by legislation from 2001 through 2010. Methods We used the Center for Disease Control and Prevention’s Division of Nutrition, Physical Activity, and Obesity database to identify state-level childhood obesity task forces created through legislation from 2001 through 2010. Results We identified 21 states that had enacted legislation creating childhood obesity task forces of which 6 had created more than one task force. Most task forces were charged with both gathering and reviewing information and making recommendations for obesity-prevention actions in the state. Most legislation required that task forces include representation from the state legislature, state agencies, community organizations, and community members. Conclusion Evaluation of the effectiveness of obesity-prevention task forces and the primary components that contribute to their success may help to determine the advantages of the use of such strategies in obesity prevention. PMID:23987250

Transport Task Force Leadership, Task 4

International Nuclear Information System (INIS)

Callen, J.D.

1991-07-01

The Transport Task Force (TTF) was initiated as a broad-based US magnetic fusion community activity during the fall of 1988 to focus attention on and encourage development of an increased understanding of anomalous transport in tokamaks. The overall TTF goal is to make progress on Characterizing, Understanding and Identifying how to Reduce plasma transport in tokamaks -- to CUIR transport

Flat-plate solar array project. Volume 3: Silicon sheet: Wafers and ribbons

Science.gov (United States)

Briglio, A.; Dumas, K.; Leipold, M.; Morrison, A.

1986-01-01

The primary objective of the Silicon Sheet Task of the Flat-Plate Solar Array (FSA) Project was the development of one or more low cost technologies for producing silicon sheet suitable for processing into cost-competitive solar cells. Silicon sheet refers to high purity crystalline silicon of size and thickness for fabrication into solar cells. Areas covered in the project were ingot growth and casting, wafering, ribbon growth, and other sheet technologies. The task made and fostered significant improvements in silicon sheet including processing of both ingot and ribbon technologies. An additional important outcome was the vastly improved understanding of the characteristics associated with high quality sheet, and the control of the parameters required for higher efficiency solar cells. Although significant sheet cost reductions were made, the technology advancements required to meet the task cost goals were not achieved.

Task force report on health effects assessment

International Nuclear Information System (INIS)

Anderson, C.; Hushon, J.

1978-08-01

From April to August, 1978 MITRE supported the Health Effects Assessment Task Force sponsored by the Office of the Assistant Secretary for the Environment at DOE. The findings of that Task Force are incorporated in this report and include a detailed definition of health effects assessment, a survey of the mandates for health effects assessments within DOE/EV, a review of current DOE-EV health effects assessment activities, an analysis of the constraints affecting the health effects assessment process and a discussion of the Task Force recommendations. Included as appendices are summaries of two workshops conducted by the Task Force to determine the state-of-the-art of health effects assessment and modeling and a review of risk assessment activities in other federal agencies. The primary recommendation of the panel was that an office be designated or created under the Office of the Assistant Secretary for the Environment to coordinate the Health Effects Risk Assessment effort covering up to 40 program and policy areas; a similar need was expressed for the environmental effects assessment area. 1 tab

Laser-zone Growth in a Ribbon-to-ribbon (RTR) Process Silicon Sheet Growth Development for the Large Area Silicon Sheet Task of the Low Cost Solar Array Project

Science.gov (United States)

Baghdadi, A.; Gurtler, R. W.; Legge, R.; Sopori, B.; Rice, M. J.; Ellis, R. J.

1979-01-01

A technique for growing limited-length ribbons continually was demonstrated. This Rigid Edge technique can be used to recrystallize about 95% of the polyribbon feedstock. A major advantage of this method is that only a single, constant length silicon ribbon is handled throughout the entire process sequence; this may be accomplished using cassettes similar to those presently in use for processing Czochralski waters. Thus a transition from Cz to ribbon technology can be smoothly affected. The maximum size being considered, 3 inches x 24 inches, is half a square foot, and will generate 6 watts for 12% efficiency at 1 sun. Silicon dioxide has been demonstrated as an effective, practical diffusion barrier for use during the polyribbon formation.

Proceedings of the IRI task force activity 2000

International Nuclear Information System (INIS)

Radicella, Sandro M.

2001-05-01

This internal report of the International Center for Theoretical Physics (ICTP) contains presentations delivered during the International Reference Ionosphere Task Force Activity 2000 which took place at the Abdus Salam ICTP during July 2000. The 2000 Task Force Activity is the seventh successful encounter of specialists organized by the URSI-COSPAR IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the ICTP of Trieste, Italy. The main topic of this task force activity was the modeling of the topside ionosphere and the development of strategies for modeling of ionospheric variability

A guide for statewide impaired-driving task forces.

Science.gov (United States)

2009-09-01

The purpose of the guide is to assist State officials and other stakeholders who are interested in establishing an : Impaired-Driving Statewide Task Force or who are exploring ways to improve their current Task Force. The guide : addresses issues suc...

Baffles Promote Wider, Thinner Silicon Ribbons

Science.gov (United States)

Seidensticker, Raymond G.; Mchugh, James P.; Hundal, Rolv; Sprecace, Richard P.

1989-01-01

Set of baffles just below exit duct of silicon-ribbon-growing furnace reduces thermal stresses in ribbons so wider ribbons grown. Productivity of furnace increased. Diverts plume of hot gas from ribbon and allows cooler gas from top of furnace to flow around. Also shields ribbon from thermal radiation from hot growth assembly. Ribbon cooled to lower temperature before reaching cooler exit duct, avoiding abrupt drop in temperature as entering duct.

Piezoelectric ribbons printed onto rubber for flexible energy conversion.

Science.gov (United States)

Qi, Yi; Jafferis, Noah T; Lyons, Kenneth; Lee, Christine M; Ahmad, Habib; McAlpine, Michael C

2010-02-10

The development of a method for integrating highly efficient energy conversion materials onto stretchable, biocompatible rubbers could yield breakthroughs in implantable or wearable energy harvesting systems. Being electromechanically coupled, piezoelectric crystals represent a particularly interesting subset of smart materials that function as sensors/actuators, bioMEMS devices, and energy converters. Yet, the crystallization of these materials generally requires high temperatures for maximally efficient performance, rendering them incompatible with temperature-sensitive plastics and rubbers. Here, we overcome these limitations by presenting a scalable and parallel process for transferring crystalline piezoelectric nanothick ribbons of lead zirconate titanate from host substrates onto flexible rubbers over macroscopic areas. Fundamental characterization of the ribbons by piezo-force microscopy indicates that their electromechanical energy conversion metrics are among the highest reported on a flexible medium. The excellent performance of the piezo-ribbon assemblies coupled with stretchable, biocompatible rubber may enable a host of exciting avenues in fundamental research and novel applications.

Elongation of Flare Ribbons

Energy Technology Data Exchange (ETDEWEB)

Qiu, Jiong; Longcope, Dana W. [Department of Physics, Montana State University, Bozeman MT (United States); Cassak, Paul A. [Department of Physics and Astronomy, West Virginia University, Morgantown WV (United States); Priest, Eric R. [School of Mathematics and Statistics, University of St. Andrews, Fife KY16 9SS, Scotland (United Kingdom)

2017-03-20

We present an analysis of the apparent elongation motion of flare ribbons along the polarity inversion line (PIL), as well as the shear of flare loops in several two-ribbon flares. Flare ribbons and loops spread along the PIL at a speed ranging from a few to a hundred km s{sup −1}. The shear measured from conjugate footpoints is consistent with the measurement from flare loops, and both show the decrease of shear toward a potential field as a flare evolves and ribbons and loops spread along the PIL. Flares exhibiting fast bidirectional elongation appear to have a strong shear, which may indicate a large magnetic guide field relative to the reconnection field in the coronal current sheet. We discuss how the analysis of ribbon motion could help infer properties in the corona where reconnection takes place.

Report of the Fermilab ILC Citizens' Task Force

Energy Technology Data Exchange (ETDEWEB)

None

2008-06-01

Fermi National Accelerator Laboratory convened the ILC Citizens' Task Force to provide guidance and advice to the laboratory to ensure that community concerns and ideas are included in all public aspects of planning and design for a proposed future accelerator, the International Linear Collider. In this report, the members of the Task Force describe the process they used to gather and analyze information on all aspects of the proposed accelerator and its potential location at Fermilab in northern Illinois. They present the conclusions and recommendations they reached as a result of the learning process and their subsequent discussions and deliberations. While the Task Force was charged to provide guidance on the ILC, it became clear during the process that the high cost of the proposed accelerator made a near-term start for the project at Fermilab unlikely. Nevertheless, based on a year of extensive learning and dialogue, the Task Force developed a series of recommendations for Fermilab to consider as the laboratory develops all successor projects to the Tevatron. The Task Force recognizes that bringing a next-generation particle physics project to Fermilab will require both a large international effort and the support of the local community. While the Task Force developed its recommendations in response to the parameters of a future ILC, the principles they set forth apply directly to any large project that may be conceived at Fermilab, or at other laboratories, in the future. With this report, the Task Force fulfills its task of guiding Fermilab from the perspective of the local community on how to move forward with a large-scale project while building positive relationships with surrounding communities. The report summarizes the benefits, concerns and potential impacts of bringing a large-scale scientific project to northern Illinois.

CHANGE@CERN:Task Force 4: Matching personnel to activities

CERN Multimedia

2002-01-01

Our series on the work of the Task Forces moves on to Human Ressources at CERN. Staff mobility and topics related to contract policy were the main personnel issues to be considered by Task Force 4, led by John Ferguson, head of AS Division. The aim, as with the other Task Forces, was to find ways to focus resources on the LHC, and once again the recommendations recognise the opportunity to make constructive changes, in this case in Human Resources policy at CERN. Movement of staff between divisions at CERN has generally not been easy, with 'staff complements' (total numbers) set for each sector (research, accelerator, technical and administration). However, the restructuring of the accelerator sector (proposed by Task Force 5 and already agreed in principle) should allow some staff to move to LHC activities. More generally, Task Force 4 recommends that the Laboratory carries out a review of all activities, at a relatively detailed level, so as to identify the resources required to achieve specific goals (t...

CHANGE@CERN:Task Force 1: finding the least painful cuts

CERN Multimedia

2002-01-01

This week sees the first in our series of reports on the work of the Task Forces By 2004, COMPASS will be the main experiment at the SPS, but the LHC experiments will also be calibrating detectors. 'It was a painful task, with which we had to proceed in the least damaging way', says Dieter Schlatter, Head of the EP Division, when describing his experience as Convenor of Task Force 1. This Task Force was charged with responsibility for advising on how money could be saved within CERN's research programme, in order to help deal with the increased cost to completion of the LHC project. Their role, as with the other Task Forces, was to suggest where savings could be made, and in most cases their suggestions have been incorporated in the Management's draft Long Term Plan. The pain of the task was to some extent alleviated by developments within the LHC project itself. Delays in the delivery of superconducting cable meant that the start up of the LHC would be delayed by a year, to 2007, and this gave Task Force ...

Effects of surface crystallization and oxidation in nanocrystalline FeNbCuSiB(P) ribbons

Energy Technology Data Exchange (ETDEWEB)

Butvinová, B., E-mail: beata.butvinova@savba.sk [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Butvin, P. [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Brzózka, K. [Department of Physics, University of Technology and Humanities in Radom, Krasickiego 54, 26-600 Radom (Poland); Kuzminski, M. [Institute of Physics PAS, Al. Lotnikow 36/42, 02-668 Warsaw (Poland); Maťko, I.; Švec Sr, P. [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Chromčíková, M. [Institute of Inorg. Chem. SAS, Centrum VILA, Študentská 2, 911 50 Trenčín (Slovakia)

2017-02-15

Si-poor Fe{sub 74}Nb{sub 3}Cu{sub 1}Si{sub 8}B{sub 14−x}P{sub x}, (x=0, 3) nanocrystalline ribbon-form alloys often form surfaces, which exert in-plane force on underlying ribbon interior when nanocrystallized in even modest presence of oxygen. Mostly unwanted hard-ribbon-axis magnetic anisotropy is standard result. Essential sources of the surface-caused stress have been sought and influence of P instead of B substitution on this effect was studied too. Preferred surface crystallization (PSC) was found to be the major reason. However P substitution suppresses PSC and promotes Fe-oxide formation, which eases the stress, softens the surfaces and provides different annealing evolution of surface properties. - Highlights: • Ar anneal of low-Si FeNbCuBSi ribbons produce surfaces that stress ribbon interior. • The stress comes mainly from preferred crystallization of surfaces. • Partial substitution of B by P changes annealing evolution of surface properties. • Without P, more crystalline surfaces significantly reduce ribbon's elasticity. • P suppresses surface crystallinity, promotes oxides and reduces mutual stress.

Task force for integral test of High Energy nuclear data

Energy Technology Data Exchange (ETDEWEB)

Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-11-01

According to completion of the JENDL-High Energy file for neutron nuclear cross sections up to 50 MeV, a task force for integral test of high energy nuclear data was organized to discuss a guide line for integral test activities. A status of existing differential and integral experiments and how to perform such a test were discussed in the task force. Here the purpose and outline of the task force is explained with some future problems raised in discussion among the task member. (author)

76 FR 5232 - Small Business Information Security Task Force

Science.gov (United States)

2011-01-28

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... 2009, SBA submits the meeting minutes for the third meeting of the Small Business Information Security...

75 FR 77934 - Small Business Information Security Task Force

Science.gov (United States)

2010-12-14

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... 2009, SBA submits the meeting minutes for the second meeting of the Small Business Information Security...

75 FR 70764 - Small Business Information Security Task Force

Science.gov (United States)

2010-11-18

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... 2009, SBA submits the meeting minutes for the first meeting of the Small Business Information Security...

76 FR 11307 - Small Business Information Security Task Force

Science.gov (United States)

2011-03-01

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... 2009, SBA submits the meeting minutes for the third meeting of the Small Business Information Security...

76 FR 65321 - Gulf War Veterans' Illnesses Task Force

Science.gov (United States)

2011-10-20

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of... Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to conduct a comprehensive review of VA's approach to and programs addressing 1990-1991 Gulf War Veterans...

78 FR 28292 - Gulf War Veterans' Illnesses Task Force

Science.gov (United States)

2013-05-14

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of... Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to conduct a comprehensive review of VA's approach to and programs addressing 1990-1991 Gulf War Veterans...

75 FR 16577 - Gulf War Veterans' Illnesses Task Force

Science.gov (United States)

2010-04-01

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of... Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to conduct a comprehensive review of VA's approach to and programs addressing 1990-1991 Gulf War Veterans...

Honeywell's Working Parents Task Force. Final Report and Recommendations.

Science.gov (United States)

Honeywell, Inc., Minneapolis, Minn.

This publication provides a summary of the Honeywell Working Parent Task Force's recommendations on how to solve problems experienced by working parents. The Task Force consisted of three committees: the Employment Practices Committee (EPC); the Parent Education Committee (PEC); and the Child Care Facilities Committee (CCFC). After examining a…

Magnetic and surface properties of Fe-Nb (Mo, V)-Cu-B-Si ribbons

International Nuclear Information System (INIS)

Butvinova, B.; Butvin, P.; Svec, P. Sr.; Matko, I.; Svec, P.; Janickovic, D.; Kadlecikova, M.

2014-01-01

The rapidly quenched Finemet (FeNbCuBSi) ribbons prepared by planar flow casting of the melt are very variable to obtain very good soft-magnetic properties. An appropriate thermal treatment leading to ultra-fine grain structure enables to attain such properties as desired for practical use. Increasing Fe percentage to the detriment of non-magnetic components lifts saturation induction above 1.3 T, preserves low coercivity and makes the alloy even cheaper to suit its mass production for use in power electronics. Apart from the plenty of benefits the ribbons show some risks. One of them is macroscopic heterogeneity, which often manifests via differences between surfaces and interior of a ribbon [3]. The surfaces squeeze (by in-plane force) the interior of many such ribbons and if engaged in magnetoelastic interaction, the force affects the resulting magnetic anisotropy [4]. Current research shows that changes of hysteresis loop shape come rather from surface crystallization and not from oxides namely in positively magnetostrictive alloys FeNbCuBSi known as low- Si Finemets. The object of this work is to verify whether the substitution of another element instead of Nb (usually incorporated as the grain-growth blocker) can change surface properties and affects the resulting magnetic properties. We chose V and Mo instead of Nb. Oxides, oxyhydroxides and a possible squeezing layer was looked for after higher temperature annealing which ensures partially nanocrystalline structure. (authors)

Control of force during rapid visuomotor force-matching tasks can be described by discrete time PID control algorithms.

Science.gov (United States)

Dideriksen, Jakob Lund; Feeney, Daniel F; Almuklass, Awad M; Enoka, Roger M

2017-08-01

Force trajectories during isometric force-matching tasks involving isometric contractions vary substantially across individuals. In this study, we investigated if this variability can be explained by discrete time proportional, integral, derivative (PID) control algorithms with varying model parameters. To this end, we analyzed the pinch force trajectories of 24 subjects performing two rapid force-matching tasks with visual feedback. Both tasks involved isometric contractions to a target force of 10% maximal voluntary contraction. One task involved a single action (pinch) and the other required a double action (concurrent pinch and wrist extension). 50,000 force trajectories were simulated with a computational neuromuscular model whose input was determined by a PID controller with different PID gains and frequencies at which the controller adjusted muscle commands. The goal was to find the best match between each experimental force trajectory and all simulated trajectories. It was possible to identify one realization of the PID controller that matched the experimental force produced during each task for most subjects (average index of similarity: 0.87 ± 0.12; 1 = perfect similarity). The similarities for both tasks were significantly greater than that would be expected by chance (single action: p = 0.01; double action: p = 0.04). Furthermore, the identified control frequencies in the simulated PID controller with the greatest similarities decreased as task difficulty increased (single action: 4.0 ± 1.8 Hz; double action: 3.1 ± 1.3 Hz). Overall, the results indicate that discrete time PID controllers are realistic models for the neural control of force in rapid force-matching tasks involving isometric contractions.

Graphene ribbon growth on structured silicon carbide

Energy Technology Data Exchange (ETDEWEB)

Stoehr, Alexander; Link, Stefan; Starke, Ulrich [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany); Baringhaus, Jens; Aprojanz, Johannes; Tegenkamp, Christoph [Institut fuer Festkoerperphysik, Leibniz Universitaet Hannover (Germany); Niu, Yuran [MAX IV Laboratory, Lund University (Sweden); present address: School of Physics and Astronomy, Cardiff University (United Kingdom); Zakharov, Alexei A. [MAX IV Laboratory, Lund University (Sweden); Chen, Chaoyu; Avila, Jose; Asensio, Maria C. [Synchrotron SOLEIL and Universite Paris-Saclay, Gif sur Yvette (France)

2017-11-15

Structured Silicon Carbide was proposed to be an ideal template for the production of arrays of edge specific graphene nanoribbons (GNRs), which could be used as a base material for graphene transistors. We prepared periodic arrays of nanoscaled stripe-mesas on SiC surfaces using electron beam lithography and reactive ion etching. Subsequent epitaxial graphene growth by annealing is differentiated between the basal-plane mesas and the faceting stripe walls as monitored by means of atomic force microscopy (AFM). Microscopic low energy electron diffraction (μ-LEED) revealed that the graphene ribbons on the facetted mesa side walls grow in epitaxial relation to the basal-plane graphene with an armchair orientation at the facet edges. The π-band system of the ribbons exhibits linear bands with a Dirac like shape corresponding to monolayer graphene as identified by angle-resolved photoemission spectroscopy (ARPES). (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

San Juan College Task Force on Innovation 1995 Report.

Science.gov (United States)

Moore, Nelle

In fall 1994, San Juan College, in New Mexico, established the Task Force on Innovation to examine changes in the paradigm of education and how those changes might affect the college. The Task Force determined that the primary driver of change in education was technology, and specifically the increasing number of means and ease of access to…

Exploiting impedance shaping approaches to overcome force overshoots in delicate interaction tasks

Directory of Open Access Journals (Sweden)

Loris Roveda

2016-09-01

Full Text Available The aim of the presented article is to overcome the force overshoot issue in impedance based force tracking applications. Nowadays, light-weight manipulators are involved in high-accurate force control applications (such as polishing tasks, where the force overshoot issue is critical (i.e. damaging the component causing a production waste, exploiting the impedance control. Two main force tracking impedance control approaches are described in literature: (a set-point deformation and (b variable stiffness approaches. However, no contributions are directly related to the force overshoot issue. The presented article extends both such methodologies to analytically achieve the force overshoots avoidance in interaction tasks based on the on-line estimation of the interacting environment stiffness (available through an EKF. Both the proposed control algorithms allow to achieve a linear closed-loop dynamics for the coupled robot-environment system. Therefore, control gains can be analytically on-line calculated to achieve an over-damped closed-loop dynamics of the controlled coupled system. Control strategies have been validated in experiments, involving a KUKA LWR 4+. A probing task has been performed, representative of many industrial tasks (e.g. assembly tasks, in which a main force task direction is defined.

Gas-Jet Meniscus Control in Ribbon Growth

Science.gov (United States)

Zoutendyk, J. A.; Vonroos, O.

1983-01-01

Gas jet used to control shape of meniscus and thus to regulate ribbon thickness in vertical silicon-ribbon growth. Gas jet also cools ribbon, increasing maximum possible pull speed for silicon, contact angle of 11 degrees plus or minus 1 degree required for constant thickness ribbon growth. Cooling effect of gas jet increases maximum possible pull speed.

Final Technical Report Transport Task Force Activities

International Nuclear Information System (INIS)

P.W. Terry

2006-01-01

The Transport Task Force has functioned as the primary scientific organization in the area of magnetic-fusion confinement and transport since its inception in 1988. It has defined and set research directions, coordinated broad research efforts, advocated new funding initiatives, and created a highly successful and widely admired interactive culture between experiment, theory and modeling. The Transport Task Force carries out its activities under the direction of its chair and the Executive Committee. The Executive Committee is comprised of the leaders and deputy leaders of the scientific working groups. The working groups are structured and organized according to research needs and priorities and have been organized around the areas of Core Transport, H Mode and Pedestal, Fast Particle Transport, Transient Transport Phenomena, and Modeling and Simulation. A steering committee provides advise on TTF activities. Further information on the working groups and the structure and management of the TTF can be found at http://psfcwww2.psfc.mit.edu/ttf/index.html. The TTF holds an annual workshop. A summary of the workshops held during the period of this report is given in Appendix I. During the period of this report the Transport Task Force was involved in several significant activities. Foremost of these was a sweeping review of the status of transport science, the key research tasks for progress during the next 5-10 years, and a proposal for a funding initiative to ensure application of adequate resources to these problems. The conclusions of this study were incorporated into a white paper, which is copied below in Appendix II. Other significant activities have included the introduction of an extended, ongoing discussion on verification and validation as a requisite for defining and codifying the path toward predictive capability, the orchestration of a gradual shift of focus from ion thermal confinement to electron thermal confinement, and a joining of efforts on edge

A CIRCULAR-RIBBON SOLAR FLARE FOLLOWING AN ASYMMETRIC FILAMENT ERUPTION

Energy Technology Data Exchange (ETDEWEB)

Liu, Chang; Deng, Na; Lee, Jeongwoo; Wang, Haimin [Space Weather Research Laboratory, New Jersey Institute of Technology, University Heights, Newark, NJ 07102-1982 (United States); Liu, Rui [CAS Key Laboratory of Geospace Environment, Department of Geophysics and Planetary Sciences, University of Science and Technology of China, Hefei 230026 (China); Pariat, Étienne [LESIA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universits, UPMC Univ. Paris 06, Univ. Paris Diderot, Sorbonne Paris Cité, F-92190 Meudon (France); Wiegelmann, Thomas [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig Weg 3, D-37077 Göttingen (Germany); Liu, Yang [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305-4085 (United States); Kleint, Lucia, E-mail: chang.liu@njit.edu [University of Applied Sciences and Arts Northwestern Switzerland, Bahnhofstrasse 6, 5210 Windisch (Switzerland)

2015-10-20

The dynamic properties of flare ribbons and the often associated filament eruptions can provide crucial information on the flaring coronal magnetic field. This Letter analyzes the GOES-class X1.0 flare on 2014 March 29 (SOL2014-03-29T17:48), in which we found an asymmetric eruption of a sigmoidal filament and an ensuing circular flare ribbon. Initially both EUV images and a preflare nonlinear force-free field model show that the filament is embedded in magnetic fields with a fan-spine-like structure. In the first phase, which is defined by a weak but still increasing X-ray emission, the western portion of the sigmoidal filament arches upward and then remains quasi-static for about five minutes. The western fan-like and the outer spine-like fields display an ascending motion, and several associated ribbons begin to brighten. Also found is a bright EUV flow that streams down along the eastern fan-like field. In the second phase that includes the main peak of hard X-ray (HXR) emission, the filament erupts, leaving behind two major HXR sources formed around its central dip portion and a circular ribbon brightened sequentially. The expanding western fan-like field interacts intensively with the outer spine-like field, as clearly seen in running difference EUV images. We discuss these observations in favor of a scenario where the asymmetric eruption of the sigmoidal filament is initiated due to an MHD instability and further facilitated by reconnection at a quasi-null in corona; the latter is in turn enhanced by the filament eruption and subsequently produces the circular flare ribbon.

77 FR 18307 - Gulf War Veterans' Illnesses Task Force Report

Science.gov (United States)

2012-03-27

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force Report AGENCY: Department...) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to conduct a comprehensive review of VA policies and programs addressing 1990-1991 Gulf War Veterans' illnesses. The GWVI-TF...

Force sharing and other collaborative strategies in a dyadic force perception task.

Science.gov (United States)

Tatti, Fabio; Baud-Bovy, Gabriel

2018-01-01

When several persons perform a physical task jointly, such as transporting an object together, the interaction force that each person experiences is the sum of the forces applied by all other persons on the same object. Therefore, there is a fundamental ambiguity about the origin of the force that each person experiences. This study investigated the ability of a dyad (two persons) to identify the direction of a small force produced by a haptic device and applied to a jointly held object. In this particular task, the dyad might split the force produced by the haptic device (the external force) in an infinite number of ways, depending on how the two partners interacted physically. A major objective of this study was to understand how the two partners coordinated their action to perceive the direction of the third force that was applied to the jointly held object. This study included a condition where each participant responded independently and another one where the two participants had to agree upon a single negotiated response. The results showed a broad range of behaviors. In general, the external force was not split in a way that would maximize the joint performance. In fact, the external force was often split very unequally, leaving one person without information about the external force. However, the performance was better than expected in this case, which led to the discovery of an unanticipated strategy whereby the person who took all the force transmitted this information to the partner by moving the jointly held object. When the dyad could negotiate the response, we found that the participant with less force information tended to switch his or her response more often.

Proceedings of the IRI Task Force Activity 2001

International Nuclear Information System (INIS)

Radicella, S.M.

2002-08-01

This ICTP Internal Report contains the list of papers presented, activity report and the write up of a number of presentations delivered during the International Reference Ionosphere (IRI) Task Force Activity 2001 which took place at the Abdus Salam ICTP during May 2001, particularly centred in the week from 21-25 May. The 2001 Task Force Activity is the eighth successful encounter of specialists organized by the URSI-Cospar IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the Abdus Salam International Centre for Theoretical Physics of Trieste, Italy. This project continues the IRI Task Force Activities at the Abdus Salam International Centre for Theoretical Physics (ICTP) in Trieste, Italy. The primary focus of this activity was the development of a specification model for ionospheric variability. Such a model is high on the wish list of users of ionospheric models. Climatological models like IRI provide monthly mean values of ionospheric parameters. Understandably a satellite designer or operator needs to know not only the monthly average conditions but also the expected deviations from these mean values. The main discussions and presentations took place during the week 21-25 May. The format was similar to last year's activity with presentations and round-table discussions in the morning and follow-on work in small subgroups in front of computer terminals in the afternoon. This Proceedings contains also four papers of the previous IRI Task Force Activity which were omitted

Task Force Report 4. Report of the Task Force on Marketing and Communications

Science.gov (United States)

Dickinson, John C.; Evans, Kenneth L.; Carter, Jan; Burke, Kevin

2004-01-01

BACKGROUND To ensure the success of the proposed New Model of family medicine and to create a better understanding of the nature and role of family medicine, an effective communications plan must be developed and implemented. This Future of Family Medicine task force report proposes strategies for communicating the role of family physicians within medicine, as well as to purchasers, consumers, and other entities. METHODS After reviewing the findings from the research conducted for the Future of Family Medicine project, the task force presents a preliminary brand-positioning strategy for family medicine messages. Based on this strategy, the task force identifies 5 major audiences to which family medicine communications should be directed. A consistent method was used to determine optimum strategies to address each audience: defining the audience, assessing the literature and other pertinent evidence, identifying the communication objectives, determining the key messages, developing brand promises, and proposing strategies and tactics to support the messages and objectives. Preliminary communications plans are then presented for each of the 5 target audiences. MAJOR FINDINGS It is important that the organizations involved in family medicine make a multiyear commitment of resources to implement and support an aggressive communications strategy, which is based on key messages to target audiences. A concerted effort is particularly needed to address the declining interest among medical students in the specialty. Implementing a comprehensive family medicine career development program may be one effective strategy to reverse this trend. To help eliminate the current confusion among the public regarding family medicine and to promote clarity and consistency in terminology, the specialty should replace the name family practice with family medicine and a new graphic symbol for the discipline of family medicine should be developed. CONCLUSION As a discipline, family medicine

Report of the HDA building Task Force.

Science.gov (United States)

Scheerer, Ernest W

2006-01-01

The Building Task Force, after researching the many options, recommended to the Board of Trustees that, at this time, it is in the best interest of the association and its members to keep the building. In addition to the reasons outlined in the preceding paragraphs, the conclusions drawn by the Task Force can be summarized as follows: 1) This is not the time to make a change as both land and construction costs are high; 2) There is little inventory at this time that would provide a significant improvement over the present building; 3) There is no urgent need to act now; and 4) Cost-effective changes can be made to make the building more valuable to the association.

HOOKED FLARE RIBBONS AND FLUX-ROPE-RELATED QSL FOOTPRINTS

Energy Technology Data Exchange (ETDEWEB)

Zhao, Jie; Li, Hui [Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory, CAS, Nanjing 210008 (China); Gilchrist, Stuart A.; Aulanier, Guillaume; Schmieder, Brigitte; Pariat, Etienne, E-mail: nj.lihui@pmo.ac.cn [LESIA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universités, UPMC Univ. Paris 06, Univ. Paris-Diderot, Sorbonne Paris Cité, 5 place Jules Janssen, F-92195 Meudon (France)

2016-05-20

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare that begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by the Solar Dynamics Observatory /Atmospheric Imaging Assembly can be well reproduced from a Grad–Rubin nonlinear force-free field extrapolation method. Various inverse-S- and inverse-J-shaped magnetic field lines, which surround a coronal flux rope, coincide with the sigmoid as observed in different extreme-ultraviolet wavelengths, including its multithreaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and setup of the Grad–Rubin method. The modeled double inverse-J-shaped quasi-separatrix layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse-teardrop-shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares and the geometrical properties of eruptive flux ropes.

HOOKED FLARE RIBBONS AND FLUX-ROPE-RELATED QSL FOOTPRINTS

International Nuclear Information System (INIS)

Zhao, Jie; Li, Hui; Gilchrist, Stuart A.; Aulanier, Guillaume; Schmieder, Brigitte; Pariat, Etienne

2016-01-01

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare that begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by the Solar Dynamics Observatory /Atmospheric Imaging Assembly can be well reproduced from a Grad–Rubin nonlinear force-free field extrapolation method. Various inverse-S- and inverse-J-shaped magnetic field lines, which surround a coronal flux rope, coincide with the sigmoid as observed in different extreme-ultraviolet wavelengths, including its multithreaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and setup of the Grad–Rubin method. The modeled double inverse-J-shaped quasi-separatrix layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse-teardrop-shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares and the geometrical properties of eruptive flux ropes.

77 FR 74341 - Establishing the Hurricane Sandy Rebuilding Task Force

Science.gov (United States)

2012-12-14

..., local, and tribal communities to improve the region's resilience, health, and prosperity by building for... Urban Development (Chair). (a) In addition to the Chair, the Task Force shall consist of the head of... offices related to the functions of the Task Force; and (iii) specifying the form and subject matter of...

Task forces for the European railway: trains and rail systems of the future; Task Force der EG: Zuege und Eisenbahnsysteme der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Blonk, W. [European Commission, Brussels (Belgium). Directorate-General VII Transport

1999-02-01

To achieve greatest benefit from the R and D activities of the EC, the Commission introduced the concept to task forces in 1995. One of these is concerned with 'trains and rail systems of the future'. This was to be seen as an element in a far-reaching political framework guideline, so bringing together hitherto separate strands of railway-related transport with industrial and research policy, contributing to revival of the sector. The main objective of these joint efforts was to contribute to radical structural and cultural changes on the railway so as - on the basis of market orientation, quality demands and cost efficiency - to give greater weight among the population to future transport challenges. This article reviews the main results attained by way of the task force and how these will be implemented in the 5th framework programme of the European Community. (orig.) [German] Um mit den FuE-Aktivitaeten der Europaeischen Gemeinschaft groessten Nutzen zu erzielen, richtete die Kommission im Jahre 1995 das Konzept von Task Forces ein. Eine dieser Task Forces beschaeftigte sich mit dem Thema 'Zuege und Eisenbahnsysteme der Zukunft'. Es war als ein Element einer weitgesteckten politischen Rahmenrichtlinie anzusehen, wobei es die vorher getrennten Straenge der eisenbahngebundenen Verkehre mit der Industrie- und Forschungspolitik zusammenbrachte und dadurch zur Wiederbelebung des Sektors beitragen konnte. (orig.)

Force sharing and other collaborative strategies in a dyadic force perception task

Science.gov (United States)

Tatti, Fabio

2018-01-01

When several persons perform a physical task jointly, such as transporting an object together, the interaction force that each person experiences is the sum of the forces applied by all other persons on the same object. Therefore, there is a fundamental ambiguity about the origin of the force that each person experiences. This study investigated the ability of a dyad (two persons) to identify the direction of a small force produced by a haptic device and applied to a jointly held object. In this particular task, the dyad might split the force produced by the haptic device (the external force) in an infinite number of ways, depending on how the two partners interacted physically. A major objective of this study was to understand how the two partners coordinated their action to perceive the direction of the third force that was applied to the jointly held object. This study included a condition where each participant responded independently and another one where the two participants had to agree upon a single negotiated response. The results showed a broad range of behaviors. In general, the external force was not split in a way that would maximize the joint performance. In fact, the external force was often split very unequally, leaving one person without information about the external force. However, the performance was better than expected in this case, which led to the discovery of an unanticipated strategy whereby the person who took all the force transmitted this information to the partner by moving the jointly held object. When the dyad could negotiate the response, we found that the participant with less force information tended to switch his or her response more often. PMID:29474433

CHANGE@CERN:Task Force 3: adjusting services to future needs

CERN Document Server

2002-01-01

We continue our articles on the Task Force reports The number of craftsmen and technicians could be increased with a change in the staff composition. The mandate for Task Force 3 was to make proposals for savings and new cost control procedures in the area of Industrial Support and Contracts for the period until 2009. The aim, explains the convenor, Karl-Heinz Kissler, was to keep spending under control under difficult conditions when staff numbers are decreasing and the work for the LHC becomes more demanding. The measures proposed, if implemented, could lead to savings of around 170 MCHF. The proposals involve both Industrial Services contracts, which were discussed in the Bulletin of the 22nd of April (n°17/2002) and readjustments for staff at CERN, on which we concentrate here. As with other Task Forces the principle aim was to be able to refocus resources onto the LHC project. In this respect, Task Force 3 could work within the framework of the revised programme for the LHC and the reduced non-LHC pro...

An introductory handbook for state task forces to combat drunk driving.

Science.gov (United States)

1983-01-01

In June 1982 Governor Robb created a task force to identify and assess efforts under way in Virginia to address the problem of drunken driving and to make recommendations. This booklet was prepared to assist the task force in its deliberations.

Numerical Simulation Of Silicon-Ribbon Growth

Science.gov (United States)

Woda, Ben K.; Kuo, Chin-Po; Utku, Senol; Ray, Sujit Kumar

1987-01-01

Mathematical model includes nonlinear effects. In development simulates growth of silicon ribbon from melt. Takes account of entire temperature and stress history of ribbon. Numerical simulations performed with new model helps in search for temperature distribution, pulling speed, and other conditions favoring growth of wide, flat, relatively defect-free silicon ribbons for solar photovoltaic cells at economically attractive, high production rates. Also applicable to materials other than silicon.

Chirality effect in disordered graphene ribbon junctions

International Nuclear Information System (INIS)

Long Wen

2012-01-01

We investigate the influence of edge chirality on the electronic transport in clean or disordered graphene ribbon junctions. By using the tight-binding model and the Landauer-Büttiker formalism, the junction conductance is obtained. In the clean sample, the zero-magnetic-field junction conductance is strongly chirality-dependent in both unipolar and bipolar ribbons, whereas the high-magnetic-field conductance is either chirality-independent in the unipolar or chirality-dependent in the bipolar ribbon. Furthermore, we study the disordered sample in the presence of magnetic field and find that the junction conductance is always chirality-insensitive for both unipolar and bipolar ribbons with adequate disorders. In addition, the disorder-induced conductance plateaus can exist in all chiral bipolar ribbons provided the disorder strength is moderate. These results suggest that we can neglect the effect of edge chirality in fabricating electronic devices based on the magnetotransport in a disordered graphene ribbon. (paper)

The Multinational Logistics Joint Task Force (MLJTF)

National Research Council Canada - National Science Library

Higginbotham, Matthew T

2007-01-01

In this monograph, by analyzing the UN, NATO and the US Army's evolving Modular Logistics Doctrine, the author integrates the key areas from each doctrine into a multinational logistics joint task force (MLJTF) organization...

Self-Assembling Biological Springs Force Transducers on the Micron Nanoscale

Energy Technology Data Exchange (ETDEWEB)

Benedek, George [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Casparay, Alfred H. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2016-08-19

In this project, we are developing a new system for measuring forces within and between nanoscale biological molecules based on mesoscopic springs made of cholesterol helical ribbons. These ribbons self-assemble in a wide variety of complex fluids containing sterol, a mixture of surfactants and water [1] and have spring constants in the range from 0.5 to 500 pN/nm [2-4]. By the end of this project, we have demonstrated that the cholesterol helical ribbons can be used for measuring forces between biological objects and for mapping the strain fields in hydrogels.

Task Force On Contractor Logistics in Support of Contingency Operations

Science.gov (United States)

2014-06-01

task force also strongly recommends outsourcing the necessary data gathering for older contracts and moving current contracts up in the queue with a...personnel, and administration, and extend to morale, welfare , recreation, and even mortuary affairs. Other services include airfield operations...analyzed and then audited only on a high-risk basis. The task force also strongly recommends outsourcing the necessary data gathering for older contracts

Report of the Material Control and Material Accounting Task Force

International Nuclear Information System (INIS)

1978-03-01

In September 1977 a Task Force was formed to complete a study of the role of material control and material accounting in NRC's safeguards program. The Task Force's assignment was to: define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for the material control and material accounting systems based on their roles and objectives; assess the extent to which the existing safeguards regulatory base meets or provides the capability to meet the recommended goals; and provide direction for material control and material accounting development, including both near-term and long-term upgrades. The study was limited to domestic nuclear facilities possessing significant amounts of plutonium, uranium-233 or highly enriched uranium in unsealed form. The Task Force findings are reported

3 CFR - White House Task Force on Middle-Class Working Families

Science.gov (United States)

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false White House Task Force on Middle-Class Working Families Presidential Documents Other Presidential Documents Memorandum of January 30, 2009 White House... times. To these ends, I hereby direct the following: Section 1. White House Task Force on Middle-Class...

Response to Vogelstein: How the 2012 AAP Task Force on circumcision went wrong.

Science.gov (United States)

Van Howe, Robert S

2018-01-01

Vogelstein cautions medical organizations against jumping into the fray of controversial issues, yet proffers the 2012 American Academy of Pediatrics' Task Force policy position on infant male circumcision as 'an appropriate use of position-statements.' Only a scratch below the surface of this policy statement uncovers the Task Force's failure to consider Vogelstein's many caveats. The Task Force supported the cultural practice by putting undeserved emphasis on questionable scientific data, while ignoring or underplaying the importance of valid contrary scientific data. Without any effort to quantitatively assess the risk/benefit balance, the Task Force concluded the benefits of circumcision outweighed the risks, while acknowledging that the incidence of risks was unknown. This Task Force differed from other Academy policy-forming panels by ignoring the Academy's standard quality measures and by not appointing members with extensive research experience, extensive publications, or recognized expertise directly related to this topic. Despite nearly 100 publications available at the time addressing the substantial ethical issues associated with infant male circumcision, the Task Force chose to ignore the ethical controversy. They merely stated, with minimal justification, the opinion of one of the Task Force members that the practice of infant male circumcision is morally permissible. The release of the report has fostered an explosion of academic discussion on the ethics of infant male circumcision with a number of national medical organizations now decrying the practice as a human rights violation. © 2017 John Wiley & Sons Ltd.

76 FR 7579 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Science.gov (United States)

2011-02-10

.... Coral Reef Task Force Public Meeting and Public Comment AGENCY: Fish and Wildlife Service, Interior... Service (Service), announce a public business meeting of the U.S. Coral Reef Task Force (USCRTF) [email protected] ); or Liza Johnson, U.S. Coral Reef Task Force Department of the Interior Liaison, U.S...

Dislocation dynamics of web type silicon ribbon

Energy Technology Data Exchange (ETDEWEB)

Dillon, Jr, O W; Tsai, C T; DeAngelis, R J

1987-03-01

Silicon ribbon grown by the dendritic web process passes through a rapidly changing thermal profile in the growth direction. This rapidly changing profile induces stresses which produce changes in the dislocation density in the ribbon. A viscoplastic material response function (Haasen-Sumino model) is used herein to calculate the stresses and the dislocation density at each point in the silicon ribbon. The residual stresses are also calculated.

CHANGE@CERN:Task Force 5 : Restructuring the accelerator sector

CERN Document Server

2002-01-01

The last of our series on the Task Forces. PS accelerator 'We had a clear mandate, which we could approach in a logical way', explains Steve Myers, Head of SL Division and convenor of Task Force 5, 'To avoid duplication of effort in the accelerator sector through a restructuring that would lead to greater efficiency and flexibility and so release resources for the LHC.' The implementation of all their recommendations is already underway, albeit with different time scales. In 2001 the accelerator sector involved more than 900 staff members in three divisions (LHC, PS and SL) and one unit (AC), working in 141 sections within 34 groups. The first step for the Task Force was to identify major activities within the sector and to set up inter-divisional working groups to review these activities (16 in all), identifying the technologies and the numbers of staff associated with each activity. The working groups were also asked to propose ways of grouping the activities into a new more efficient organizational stru...

75 FR 24781 - Task Force on Space Industry Workforce and Economic Development

Science.gov (United States)

2010-05-06

... economic and workforce-development efforts through a Task Force composed of senior-level Administration... officials on existing committees or task forces addressing technological development, research, or aerospace... Office of Management and Budget relating to budgetary, administrative, or legislative proposals. (c) This...

Ca(2+) influx and neurotransmitter release at ribbon synapses.

Science.gov (United States)

Cho, Soyoun; von Gersdorff, Henrique

2012-01-01

Ca(2+) influx through voltage-gated Ca(2+) channels triggers the release of neurotransmitters at presynaptic terminals. Some sensory receptor cells in the peripheral auditory and visual systems have specialized synapses that express an electron-dense organelle called a synaptic ribbon. Like conventional synapses, ribbon synapses exhibit SNARE-mediated exocytosis, clathrin-mediated endocytosis, and short-term plasticity. However, unlike non-ribbon synapses, voltage-gated L-type Ca(2+) channel opening at ribbon synapses triggers a form of multiquantal release that can be highly synchronous. Furthermore, ribbon synapses appear to be specialized for fast and high throughput exocytosis controlled by graded membrane potential changes. Here we will discuss some of the basic aspects of synaptic transmission at different types of ribbon synapses, and we will emphasize recent evidence that auditory and retinal ribbon synapses have marked differences. This will lead us to suggest that ribbon synapses are specialized for particular operating ranges and frequencies of stimulation. We propose that different types of ribbon synapses transfer diverse rates of sensory information by expressing a particular repertoire of critical components, and by placing them at precise and strategic locations, so that a continuous supply of primed vesicles and Ca(2+) influx leads to fast, accurate, and ongoing exocytosis. Copyright © 2012 Elsevier Ltd. All rights reserved.

76 FR 52318 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Science.gov (United States)

2011-08-22

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration U.S. Coral Reef Task Force... of the U.S. Coral Reef Task Force. The meeting will be held in Ft. Lauderdale, Florida. This meeting, the 26th bi-annual meeting of the U.S. Coral Reef Task Force, provides a forum for coordinated...

76 FR 67761 - Establishment of the Attorney General's National Task Force on Children Exposed to Violence

Science.gov (United States)

2011-11-02

... the Attorney General's National Task Force on Children Exposed to Violence AGENCY: Office of Juvenile.... SUMMARY: The Attorney General's National Task Force on Children Exposed to Violence (the Task Force) is....C., App. 2. The Task Force will provide the Attorney General with valuable advice on a broad array...

75 FR 47624 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Science.gov (United States)

2010-08-06

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service U.S. Coral Reef Task Force Public Meeting and... (Service), announce a public meeting of the U.S. Coral Reef Task Force (USCRTF) and a request for written.... Coral Reef Task Force Department of the Interior Liaison, U.S. Department of the Interior, MS-3530-MIB...

Dynamical signatures of isometric force control as a function of age, expertise, and task constraints.

Science.gov (United States)

Vieluf, Solveig; Sleimen-Malkoun, Rita; Voelcker-Rehage, Claudia; Jirsa, Viktor; Reuter, Eva-Maria; Godde, Ben; Temprado, Jean-Jacques; Huys, Raoul

2017-07-01

From the conceptual and methodological framework of the dynamical systems approach, force control results from complex interactions of various subsystems yielding observable behavioral fluctuations, which comprise both deterministic (predictable) and stochastic (noise-like) dynamical components. Here, we investigated these components contributing to the observed variability in force control in groups of participants differing in age and expertise level. To this aim, young (18-25 yr) as well as late middle-aged (55-65 yr) novices and experts (precision mechanics) performed a force maintenance and a force modulation task. Results showed that whereas the amplitude of force variability did not differ across groups in the maintenance tasks, in the modulation task it was higher for late middle-aged novices than for experts and higher for both these groups than for young participants. Within both tasks and for all groups, stochastic fluctuations were lowest where the deterministic influence was smallest. However, although all groups showed similar dynamics underlying force control in the maintenance task, a group effect was found for deterministic and stochastic fluctuations in the modulation task. The latter findings imply that both components were involved in the observed group differences in the variability of force fluctuations in the modulation task. These findings suggest that between groups the general characteristics of the dynamics do not differ in either task and that force control is more affected by age than by expertise. However, expertise seems to counteract some of the age effects. NEW & NOTEWORTHY Stochastic and deterministic dynamical components contribute to force production. Dynamical signatures differ between force maintenance and cyclic force modulation tasks but hardly between age and expertise groups. Differences in both stochastic and deterministic components are associated with group differences in behavioral variability, and observed behavioral

Are All Flare Ribbons Simply Connected to the Corona?

Energy Technology Data Exchange (ETDEWEB)

Judge, Philip G. [High Altitude Observatory, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307-3000 (United States); Paraschiv, Alin; Lacatus, Daniela; Donea, Alina [Monash Center for Astrophysics, School of Mathematical Science, Monash University, Victoria 3800 (Australia); Lindsey, Charlie, E-mail: judge@ucar.edu, E-mail: alina.donea@monash.edu, E-mail: alin.paraschiv@monash.edu, E-mail: daniela.lacatus@monash.edu, E-mail: indsey@cora.nwra.com [Northwest Research Associates, 3380 Mitchell Lane, Boulder, CO 80301 (United States)

2017-04-01

We consider the observational basis for the belief that flare ribbons in the chromosphere result from energy transport from the overlying corona. We study ribbons of small flares using magnetic and intensity data from the Hinode , Solar Dynamics Observatory , and IRIS missions. While most ribbons appear connected to the corona and overlie regions of significant vertical magnetic field, we examine one ribbon with no clear evidence for such connections. Evolving horizontal magnetic fields seen with Hinode suggest that reconnection with preexisting fields below the corona can explain the data. The identification of just one, albeit small, ribbon, with no apparent connection to the corona, leads us to conclude that at least two mechanisms are responsible for the heating that leads to flare ribbon emission.

Geothermal Technologies Program Blue Ribbon Panel Recommendations

Energy Technology Data Exchange (ETDEWEB)

none,

2011-06-17

The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses

International Nuclear Information System (INIS)

Jiang, W.H.; Liu, F.X.; Wang, Y.D.; Zhang, H.F.; Choo, H.; Liaw, P.K.

2006-01-01

As-cast bulk and as-spun ribbon Cu 60 Zr 30 Ti 10 metallic glasses were characterized using differential-scanning calorimetry and instrumented nanoindentation. Two alloys show a significant difference in the amount of free volume, which is attributed to the difference in a cooling rate, while exhibiting a similar serrated plastic flow. Atomic-force-microscopy observations demonstrate the pile-ups containing shear bands around the indents in both alloys. The as-cast bulk alloy has higher hardness and elastic modulus than the as-spun ribbon alloy. The difference in the strengths of two alloys may be related to the different amount of free volume. The strength seems to be more sensitive to a cooling rate during solidification than the plastic-flow behavior in the Cu 60 Zr 30 Ti 10

Diagrammatic documentation for ribbon computing in Microsoft Office

Directory of Open Access Journals (Sweden)

Kaveh Farbeh-Tabrizi

Full Text Available In 2007 Microsoft changed the graphical user interface of MS Office, and moved away from the long -established drop down menu approach to a ribbon graphical user interface. There have been mixed reactions to Microsoft\\'s ribbon interface. Ericson (2006 mentioned that even the experienced user might have difficulty adopting the interface, and Dostal (2010 concluded that the biggest issue with the Ribbon User Interface is to get accustomed to a redesigned user interface. Reaction to this change was negative among our new and current students. For years the students had tried to memorise how to apply the right commands in Microsoft Office applications by selecting the correct items from the dropdown menus of the WIMP (windows, icons, menus, pointer interface, and now that they were confronted with the new interface their confusion had begun to slow their progress down. The major effect in transition from the traditional WIMP interface to the Ribbon interface had created a difficulty for most students who had their original training with the older versions of MS Office software, as they were not able to locate the commands that they had learnt with the earlier versions of the MS Office in the new Ribbon interfaced version. The shrinking nature of the ribbon that would hide some commands on the ribbon when the resolution of the screen changes was also confusing for those students as they could not quickly locate the command they were looking for because the Ribbon had compacted them to save space. For both new students and also more experienced ones, the approach to learning the Ribbon Interface seemed to be difficult due to the fact that they had to memorise the hierarchy of tab names, group names and then the commands. This led us to enhance our current teaching methods to try to deal with this change.

Task Force on Innovation in Dental Hygiene Curricula.

Science.gov (United States)

Bader, James; And Others

1989-01-01

The background, origins, functions, and recommendations of the American Association of Dental Schools' task force investigating improvement of access to dental hygiene training programs and of curriculum and program design are presented. (MSE)

ON THE GEOMETRY OF THE IBEX RIBBON

Energy Technology Data Exchange (ETDEWEB)

Sylla, Adama; Fichtner, Horst [Institut für Theoretische Physik IV, Ruhr-Universität Bochum, D-44780 Bochum (Germany)

2015-10-01

The Energetic Neutral Atom (ENA) full-sky maps obtained with the Interstellar Boundary Explorer (IBEX) show an unexpected bright narrow band of increased intensity. This so-called ENA ribbon results from charge exchange of interstellar neutral atoms with protons in the outer heliosphere or beyond. Among other hypotheses it has been argued that this ribbon may be related to a neutral density enhancement, or H-wave, in the local interstellar medium. Here we quantitatively demonstrate, on the basis of an analytical model of the principal large-scale heliospheric structure, that this scenario for the ribbon formation leads to results that are fully consistent with the observed location of the ribbon in the full-sky maps at all energies detected with high-energy sensor IBEX-Hi.

ATR Commissioning Software Task Force Report

Energy Technology Data Exchange (ETDEWEB)

D' Ottavio, Ted [Brookhaven National Lab. (BNL), Upton, NY (United States); Kewisch, Jorg [Brookhaven National Lab. (BNL), Upton, NY (United States); Saltmarsh, Chris [Brookhaven National Lab. (BNL), Upton, NY (United States); Sathe, Smita [Brookhaven National Lab. (BNL), Upton, NY (United States); Satogata, Todd [Brookhaven National Lab. (BNL), Upton, NY (United States); Shea, Don [Brookhaven National Lab. (BNL), Upton, NY (United States); Tepikian, Steve [Brookhaven National Lab. (BNL), Upton, NY (United States); Trahern, Garry [Brookhaven National Lab. (BNL), Upton, NY (United States)

1994-12-16

The Beam Injection Tests Software Task Force was charged with studying the software needed for the ATR tests, seen as a stepping stone or template for the larger scope of the full RHIC control system. This report outlines our avenues of exploration so far, presents the current analysis and implementation work in progress, and gives recommendations for the future on the ATR and longer time scales.

Bidirectional transfer between joint and individual actions in a task of discrete force production.

Science.gov (United States)

Masumoto, Junya; Inui, Nobuyuki

2017-07-01

The present study examined bidirectional learning transfer between joint and individual actions involving discrete isometric force production with the right index finger. To examine the effects of practice of joint action on performance of the individual action, participants performed a pre-test (individual condition), practice blocks (joint condition), and a post-test (individual condition) (IJI task). To examine the effects of practice of the individual action on performance during the joint action, the participants performed a pre-test (joint condition), practice blocks (individual condition), and a post-test (joint condition) (JIJ task). Whereas one participant made pressing movements with a target peak force of 10% maximum voluntary contraction (MVC) in the individual condition, two participants produced the target force of the sum of 10% MVC produced by each of them in the joint condition. In both the IJI and JIJ tasks, absolute errors and standard deviations of peak force were smaller post-test than pre-test, indicating bidirectional transfer between individual and joint conditions for force accuracy and variability. Although the negative correlation between forces produced by two participants (complementary force production) became stronger with practice blocks in the IJI task, there was no difference between the pre- and post-tests for the negative correlation in the JIJ task. In the JIJ task, the decrease in force accuracy and variability during the individual action did not facilitate complementary force production during the joint action. This indicates that practice performed by two people is essential for complementary force production in joint action.

Can NATO's new Very High Readiness Joint Task Force deter?

DEFF Research Database (Denmark)

Rynning, Sten; Ringsmose, Jens

2017-01-01

” a distinct strategic rival – Russia. Chief among the Welsh summit initiatives was the decision to set up a new multinational spearhead force – the Very High Readiness Joint Task Force (VJTF) – as part of an enhanced NATO Response Force (NRF) and within the framework of a so-called Readiness Action Plan (RAP...

TMI-2 Lessons Learned Task Force status report and short-term recommendations

International Nuclear Information System (INIS)

1979-07-01

Review of the Three Mile Island accident by the TMI-2 Lessons Learned Task Force has disclosed a number of actions in the areas of design and analysis and plant operations that the Task Force recommends be required in the short term to provide substantial additional protection which is required for the public health and safety. All nuclear power plants in operation or in various stages of construction or licensing action are affected to varying degrees by the specific recommendations. The Task Force is continuing work in areas of general safety criteria, systems design requirements, nuclear power plant operations, and nuclear power plant licensing

Observations and Numerical Modeling of the Jovian Ribbon

Science.gov (United States)

Cosentino, R. G.; Simon, A.; Morales-Juberias, R.; Sayanagi, K. M.

2015-01-01

Multiple wavelength observations made by the Hubble Space Telescope in early 2007 show the presence of a wavy, high-contrast feature in Jupiter's atmosphere near 30 degrees North. The "Jovian Ribbon," best seen at 410 nanometers, irregularly undulates in latitude and is time-variable in appearance. A meridional intensity gradient algorithm was applied to the observations to track the Ribbon's contour. Spectral analysis of the contour revealed that the Ribbon's structure is a combination of several wavenumbers ranging from k equals 8-40. The Ribbon is a dynamic structure that has been observed to have spectral power for dominant wavenumbers which vary over a time period of one month. The presence of the Ribbon correlates with periods when the velocity of the westward jet at the same location is highest. We conducted numerical simulations to investigate the stability of westward jets of varying speed, vertical shear, and background static stability to different perturbations. A Ribbon-like morphology was best reproduced with a 35 per millisecond westward jet that decreases in amplitude for pressures greater than 700 hectopascals and a background static stability of N equals 0.005 per second perturbed by heat pulses constrained to latitudes south of 30 degrees North. Additionally, the simulated feature had wavenumbers that qualitatively matched observations and evolved throughout the simulation reproducing the Jovian Ribbon's dynamic structure.

The ribbon microphone - an educational aid: use of a ribbon microphone to teach multi-discipline computer simulation skills

CSIR Research Space (South Africa)

Van Wyk, Marius

2016-07-01

Full Text Available The ribbon microphone serves as an excellent aid to learn computer simulation and computational skills. Simulation of this seemingly simple device is all but trivial. The ribbon microphone is an all-in-one example for simulations in acoustics...

Proceedings of the IRI Task Force Activity 2002. 1. ed

International Nuclear Information System (INIS)

Radicella, S.M.

2003-06-01

This ICTP Internal Report contains the list of papers presented, activity reports and the write up of a number of presentations delivered during the International Reference Ionosphere (IRI) Task Force Activity 2002 which took place at the Abdus Salam ICTP during August 2002. The 2002 Task Force Activity is the ninth successful encounter of specialists organized by the URSI-Cospar IRI Working Group and the Aeronomy and Radiopropagation Laboratory of the Abdus Salam International Centre for Theoretical Physics of Trieste, Italy. The main topics of the meeting were ionosphere variability and topside ionosphere

Electrostatics-Driven Hierarchical Buckling of Charged Flexible Ribbons.

Science.gov (United States)

Yao, Zhenwei; Olvera de la Cruz, Monica

2016-04-08

We investigate the rich morphologies of an electrically charged flexible ribbon, which is a prototype for many beltlike structures in biology and nanomaterials. Long-range electrostatic repulsion is found to govern the hierarchical buckling of the ribbon from its initially flat shape to its undulated and out-of-plane twisted conformations. In this process, the screening length is the key controlling parameter, suggesting that a convenient way to manipulate the ribbon morphology is simply to change the salt concentration. We find that these shapes originate from the geometric effect of the electrostatic interaction, which fundamentally changes the metric over the ribbon surface. We also identify the basic modes by which the ribbon reshapes itself in order to lower the energy. The geometric effect of the physical interaction revealed in this Letter has implications for the shape design of extensive ribbonlike materials in nano- and biomaterials.

Carbon nanotube fiber spun from wetted ribbon

Science.gov (United States)

Zhu, Yuntian T; Arendt, Paul; Zhang, Xiefei; Li, Qingwen; Fu, Lei; Zheng, Lianxi

2014-04-29

A fiber of carbon nanotubes was prepared by a wet-spinning method involving drawing carbon nanotubes away from a substantially aligned, supported array of carbon nanotubes to form a ribbon, wetting the ribbon with a liquid, and spinning a fiber from the wetted ribbon. The liquid can be a polymer solution and after forming the fiber, the polymer can be cured. The resulting fiber has a higher tensile strength and higher conductivity compared to dry-spun fibers and to wet-spun fibers prepared by other methods.

75 FR 48929 - Notice of Meeting of the Agricultural Air Quality Task Force

Science.gov (United States)

2010-08-12

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service (NRCS), United States... Triangle Park, North Carolina 27711; (919) 541-5400. The Agricultural Air Quality Task Force (AAQTF) will...

Catastrophic antiphospholipid syndrome: task force report summary.

Science.gov (United States)

Cervera, R; Rodríguez-Pintó, I

2014-10-01

The Task Force on Catastrophic Antiphospholipid Syndrome (CAPS) aimed to assess the current knowledge on pathogenesis, clinical and laboratory features, diagnosis and classification, precipitating factors and treatment of CAPS. This article summarizes the main aspects of its final report. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Interstate Migrant Education Task Force: Migrant Health.

Science.gov (United States)

Education Commission of the States, Denver, CO.

Because ill-clothed, sick, or hungry migrant children learn poorly, the Task Force has emphasized the migrant health situation in 1979. Migrant workers have a 33% shorter life expectancy, a 25% higher infant mortality rate, and a 25% higher death rate from tuberculosis and other communicable diseases than the national average. Common among…

Offshore petroleum engineering task force report

International Nuclear Information System (INIS)

Ruelokke, M.

1999-05-01

The Offshore Petroleum Engineering Task Force was established in July 1998 in response to concerns about Newfoundland and Labrador's share of offshore petroleum engineering activity, with the aim of determining the current capability of the local sector, the demand for such companies and individuals until the year 2010, their capability to grow over that time-frame, and requirements in order to achieve that growth. The report summarizes the analysis undertaken by the Task Force as well as the conclusions it reached and associated recommendations. Section two provides an overview of the offshore engineering activity, including its origins, structure, and key success factors, and its also provides a profile of the industry, internationally, in Canada and in Newfoundland. Section three presents an analysis of the future demand for offshore engineering in Newfoundland until 2010, based on three development scenarios. Section four based on a Consulting Engineers of Newfoundland and Labrador (CENL) survey, establishes the present offshore engineering capacity and capabilities within the province. Section five examines current education and training programs and their ability to respond to future demands. Section six summarizes the conclusions of the analysis and presents recommendations designed to facilitate and promote the development of the local offshore engineering industry. 6 figs

Department of Defense Recovering Warrior Task Force

Science.gov (United States)

2014-09-02

accessible and available to the Veterans Benefits Administration ( VBA ) as soon as possible381; however, because military service records include health...programs are meeting expectations ........................................... 35 Facilitating Access to Health Care...Enduring RW Mission, Facilitating RW Recovery and Transition, and Facilitating Access to Health Care. SUMMARY 2  DoD Recovering Warrior Task Force

77 FR 61019 - Aquatic Nuisance Species Task Force Meeting

Science.gov (United States)

2012-10-05

...: http://anstaskforce.gov/meetings.php . FOR FURTHER INFORMATION CONTACT: Susan Mangin, Executive... information are on the ANS Task Force Web site at: http://anstaskforce.gov/meetings.php . Accessibility...

76 FR 15334 - Aquatic Nuisance Species Task Force Meeting

Science.gov (United States)

2011-03-21

... Task Force Web site at: http://anstaskforce.gov/meetings.php . FOR FURTHER INFORMATION CONTACT: Susan...: http://anstaskforce.gov/meetings.php . Dated: March 14, 2011. Jeffrey Underwood, Acting Assistant...

U.S. Preventive Services Task Force recommendations and cancer screening among female Medicare beneficiaries.

Science.gov (United States)

Salloum, Ramzi G; Kohler, Racquel E; Jensen, Gail A; Sheridan, Stacey L; Carpenter, William R; Biddle, Andrea K

2014-03-01

Medicare covers several cancer screening tests not currently recommended by the U.S. Preventive Services Task Force (Task Force). In September 2002, the Task Force relaxed the upper age limit of 70 years for breast cancer screening recommendations, and in March 2003 an upper age limit of 65 years was introduced for cervical cancer screening recommendations. We assessed whether mammogram and Pap test utilization among women with Medicare coverage is influenced by changes in the Task Force's recommendations for screening. We identified female Medicare beneficiaries aged 66-80 years and used bivariate probit regression to examine the receipt of breast (mammogram) and cervical (Pap test) cancer screening reflecting changes in the Task Force recommendations. We analyzed 9,760 Medicare Current Beneficiary Survey responses from 2001 to 2007. More than two-thirds reported receiving a mammogram and more than one-third a Pap test in the previous 2 years. Lack of recommendation was given as a reason for not getting screened among the majority (51% for mammogram and 75% for Pap). After controlling for beneficiary-level socioeconomic characteristics and access to care factors, we did not observe a significant change in breast and cervical cancer screening patterns following the changes in Task Force recommendations. Although there is evidence that many Medicare beneficiaries adhere to screening guidelines, some women may be receiving non-recommended screening services covered by Medicare.

Magnetic force microscopy characterization of heat and current treated Fe40Ni38Mo4B18 amorphous ribbons

International Nuclear Information System (INIS)

Garcia, Ignacio; Iturriza, Nuria; Jose del Val, Juan; Grande, Hans; Pomposo, Jose A.; Gonzalez, Julian

2010-01-01

The domain structure of a magnetostrictive Fe 40 Ni 38 Mo 4 B 18 amorphous ribbon has been studied using magnetic force microscopy (MFM) at room temperature. First, the evolution of the magnetic domain patterns as a function of the annealing temperature has been investigated. In samples heat treated at 250 and 450 deg. C for 1 h, a transformation from 90 deg. to 180 deg. domain wall has been clearly observed, while the sample heat treated at 700 deg. C for 1 h showed a magnetic phase fixed by the crystalline anisotropy. Additionally, the evolution of the magnetic domain structure by applying a DC current was recorded by the MFM technique. For current annealed samples at 1 A for 1, 30 and 60 min, a transformation between different domain patterns has been observed. Finally, in samples treated by the current annealing method under simultaneous stress, an increase of the annealing time gives rise to a different magnetic structure arising from the development of transverse magnetic anisotropy.

75 FR 15457 - Aquatic Nuisance Species Task Force Meeting

Science.gov (United States)

2010-03-29

...: http://anstaskforce.gov/meetings.php . FOR FURTHER INFORMATION CONTACT: Susan Mangin, Executive... on the ANS Task Force Web site at: http://anstaskforce.gov/meetings.php . Dated: March 19, 2010...

Report of the Task Force on bonding and perpetual care of nuclear licensed activities

International Nuclear Information System (INIS)

Snellings, D.D. Jr.

1975-01-01

The primary concern was to consider the bonding and perpetual care requirements of state-licensed shallow land burial sites used for the disposal of radioactive wastes. The specific charge of the task force was to examine in detail the requirements for establishing bonding and perpetual care programs for all types of licensed nuclear activities and to report the findings of the task force as guidance to assist states in program development. Goals and recommendations of the task force are discussed

Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

Energy Technology Data Exchange (ETDEWEB)

PI: Lily Y. Young

2009-06-04

Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoring workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical

Task force on resource development and the economy

International Nuclear Information System (INIS)

Mansell, R.L.; Staples, L.B.

2011-02-01

In Alberta, the development and growth of the economy relies heavily on the resource sectors, which drive half of all employment. In 2009, the Alberta Chamber of Resources commissioned a task force, comprising groups from the 9 resource sectors in Alberta, to examine resource development and the economy. The aim of this team was to present the impact that the resource sectors had on Alberta's economy in the past, the impact it could have in the future, and to make recommendations on how to meet the full potential of resource development in the province. This reports states that considerable resources of bitumen and coal are present in Alberta and that forestry and diamonds could also play important roles in future resource development. The task force believes that the resource sectors will continue lead gross domestic product growth in Alberta and 16 recommendations for meeting the province's full potential are provided.

ACR-SNM Task Force on Nuclear Medicine Training: report of the task force.

Science.gov (United States)

Guiberteau, Milton J; Graham, Michael M

2011-06-01

The expansion of knowledge and technological advances in nuclear medicine and radiology require physicians to have more expertise in functional and anatomic imaging. The convergence of these two specialties into the new discipline of molecular imaging has also begun to place demands on residency training programs for additional instruction in physiology and molecular biology. These changes have unmasked weaknesses in current nuclear medicine and radiology training programs. Adding to the impetus for change are the attendant realities of the job market and uncertain employment prospects for physicians trained in nuclear medicine but not also trained in diagnostic radiology. With this background, the ACR and the Society of Nuclear Medicine convened the Task Force on Nuclear Medicine Training to define the issues and develop recommendations for resident training.

77 FR 6786 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Science.gov (United States)

2012-02-09

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration U.S. Coral Reef Task Force... of the U.S. Coral Reef Task Force. The meeting will be held in Washington, DC This meeting, the 27th [[Page 6787

U.S. Transport Task Force 2010 Meeting

International Nuclear Information System (INIS)

Diamond, P.H.

2011-01-01

The Transport Task Force (TTF) Meeting is a venue for vigorous scientific discourse and discussion on topics in transport and turbulence in fusion plasmas. Its participation is international. The 2010 meeting was highly effective, with 139 registered participants and 131 presentations. This is remarkable for an even year (IAEA year) meeting. The meeting clearly fostered progress in understanding and control of turbulent transport.

Report from the ATLAS Architecture TaskForce

CERN Document Server

Haywood, S

1999-01-01

In this report, the activities and conclusions of the ATLAS Architecture TaskForce (ATF) are summarised. A key part of the ATF's work has been the first attempt at a design of the global architecture for the ATLAS Offline Software. This is contained in this document and an auxillary report and should lead to a realisation of the ATLAS Framework.

Report of the Office of Nuclear Reactor Regulation technical assistance task force

International Nuclear Information System (INIS)

1981-11-01

In 1981, the Director of the Office of Nuclear Reactor Regulation (NRR) of the Nuclear Regulatory Commission (NRC) chartered a task force to assess the office program of technical assistance and to recommend improvements. The task force divided the technical assistance program into four areas, and the practices in each area were assessed through a series of surveys of staff, management, and contractor personnel. The task force placed emphasis in its interview and assessment process on the problem areas that exist in the technical assistance program. The report thus reflects a weight on the faults found as a result of the inquiries made. The four major areas of technical assistance contracting studied were program planning, program management and execution, program control and management information systems, and program administration and coordination

Real time relationship between individual finger force and grip exertion on distal phalanges in linear force following tasks.

Science.gov (United States)

Luo, Shi-Jian; Shu, Ge; Gong, Yan

2018-05-01

Individual finger force (FF) in a grip task is a vital concern in rehabilitation engineering and precise control of manipulators because disorders in any of the fingers will affect the stability or accuracy of the grip force (GF). To understand the functions of each finger in a dynamic grip exertion task, a GF following experiment with four individual fingers without thumb was designed. This study obtained four individual FFs from the distal phalanges with a cylindrical handle in dynamic GF following tasks. Ten healthy male subjects with similar hand sizes participated in the four-finger linear GF following tasks at different submaximal voluntary contraction (SMVC) levels. The total GF, individual FF, finger force contribution, and following error were subsequently calculated and analyzed. The statistics indicated the following: 1) the accuracy and stability of GF at low %MVC were significantly higher than those at high SMVC; 2) at low SMVC, the ability of the fingers to increase the GF was better than the ability to reduce it, but it was contrary at high SMVC; 3) when the target wave (TW) was changing, all four fingers strongly participated in the force exertion, but the participation of the little finger decreased significantly when TW remained stable; 4) the index finger and ring finger had a complementary relationship and played a vital role in the adjustment and control of GF. The middle finger and little finger had a minor influence on the force control and adjustment. In conclusion, each of the fingers had different functions in a GF following task. These findings can be used in the assessment of finger injury rehabilitation and for algorithms of precise control. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Role of Pickup Ion Dynamics Outside of the Heliopause in the Limit of Weak Pitch Angle Scattering: Implications for the Source of the IBEX Ribbon

Science.gov (United States)

Zirnstein, E. J.; Heerikhuisen, J.; Dayeh, M. A.

2018-03-01

We present a new model of the Interstellar Boundary Explorer (IBEX) ribbon based on the secondary energetic neutral atom (ENA) mechanism, under the assumption that there is negligible pitch angle scattering of pickup ions (PUIs) outside the heliopause. Using the results of an MHD-plasma/kinetic-neutral simulation of the heliosphere, we generate PUIs in the outer heliosheath, solve their transport using guiding center theory, and compute ribbon ENA fluxes at 1 au. We implement several aspects of the PUI dynamics, including (1) parallel motion along the local interstellar magnetic field (ISMF), (2) advective transport with the interstellar plasma, (3) the mirror force acting on PUIs propagating along the ISMF, and (4) betatron acceleration of PUIs as they are advected within an increasing magnetic field toward the heliopause. We find that ENA fluxes at 1 au are reduced when PUIs are allowed to move along the ISMF, and ENA fluxes are reduced even more by the inclusion of the mirror force, which pushes particles away from IBEX lines of sight. Inclusion of advection and betatron acceleration do not result in any significant change in the ribbon. Interestingly, the mirror force reduces the ENA fluxes from the inner edge of the ribbon more than those from its outer edge, effectively reducing the ribbon’s width by ∼6° and increasing its radius projected on the sky. This is caused by the asymmetric draping of the ISMF around the heliopause, such that ENAs from the ribbon’s inner edge originate closer to the heliopause, where the mirror force is strongest.

Magnetic and sensitive magnetoelastic properties of Finemet nanostructured ribbon

International Nuclear Information System (INIS)

Pham Duc Thang; Hoang Hai Duong; Nguyen Hoang Nghi

2009-01-01

Soft-magnetic Fe 73.5 Cu 1 Nb 3 Si 13.5 B 9 (Finemet) ribbon has been fabricated by using melt-spinning techniques. After annealing at suitable temperature the ribbon changes from an amorphous to crystalline state which related to the formation of Fe nanocrystallites. Study on the magnetic and magnetoelastic properties of the ribbon is presented. Furthermore, based on the fabricated ribbon stress sensors are simply constructed. The sensors showed high sensitivity of 3.8 mV/MPa as well as a wide working range up to 17 MPa. These sensors are potential for practical applications such as detecting small stress and movement in civil structures.

Fin Ray Stiffness and Fin Morphology Control Ribbon-Fin-Based Propulsion.

Science.gov (United States)

Liu, Hanlin; Taylor, Bevan; Curet, Oscar M

2017-06-01

Ribbon-fin-based propulsion has rich locomotor capabilities that can enhance the mobility and performance of underwater vehicles navigating in complex environments. Bony fishes using this type of propulsion send one or multiple traveling waves along an elongated fin with the actuation of highly flexible rays that are interconnected by an elastic membrane. In this work, we study how the use of flexible rays and different morphology can affect the performance of ribbon-fin propulsion. We developed a physical model composed of 15 rays that are interconnected with an elastic membrane. We tested four different ray flexural stiffness and four aspect ratios. The robotic model was tested in a low-turbulence flume under two flow conditions ([Formula: see text] wavelength/s). In two experimental sets, we measured fin kinematics, net surge forces, and power consumption. Using these data, we perform a thrust and power analysis of the undulating fin. We present the thrust coefficient, power coefficient, and propulsive efficiency. We find that the thrust generation was linear with the enclosed area swept by the fin, and square of the relative velocity between the incoming flow and traveling wave. The thrust coefficient levels off around 0.5. In addition, for our parameter range, we find that the power consumption scales by the cube of the effective tangential velocity of the rays [Formula: see text] (A is the amplitude of the ray oscillating motion, and [Formula: see text] is the angular velocity). We show that a decay in stiffness decreases both thrust production and power consumption. However, for rays with high flexural stiffness, the difference in thrust compared with rigid rays is minimal. Moreover, our results show that flexible rays can improve the propulsive efficiency compared with a rigid counterpart. Finally, we find that the morphology of ribbon fin affects its propulsive efficiency. For the aspect ratio considered in our experiments, [Formula: see text] was the most

Wrinkles, loops, and topological defects in twisted ribbons

Science.gov (United States)

Chopin, Julien

Nature abounds with elastic ribbon like shapes including double-stranded semiflexible polymers, graphene and metal oxide nanoribbons which are examples of elongated elastic structures with a strongly anisotropic cross-section. Due to this specific geometry, it is far from trivial to anticipate if a ribbon should be considered as a flat flexible filament or a narrow thin plate. We thus perform an experiment in which a thin elastic ribbon is loaded using a twisting and traction device coupled with a micro X-ray computed tomography machine allowing a full 3D shape reconstruction. A wealth of morphological behaviors can be observed including wrinkled helicoids, curled and looped configurations, and faceted ribbons. In this talk, I will show that most morphologies can be understood using a far-from-threshold approach and simple scaling arguments. Further, we find that the various shapes can be organized in a phase diagram using the twist, the tension, and the geometry of the ribbon as control parameters. Finally, I will discuss the spontaneous formation of topological defects with negatively-signed Gaussian charge at large twist and small but finite stretch.

Consumer Information. NASFAA Task Force Report. Consumer Information

Science.gov (United States)

National Association of Student Financial Aid Administrators, 2014

2014-01-01

The National Association of Student Financial Aid and Administrators (NASFAA) Consumer Information Task Force was convened to conduct a thorough review of the current student consumer information requirements and propose ways to streamline both the content and delivery of those requirements. The proposals in the this report were produced for…

LIBER MARC Harmonization Task Force - Format activities in European countries

Directory of Open Access Journals (Sweden)

Renate Gömpel

2004-03-01

Full Text Available The LIBER MARC Harmonization Task Force has its origins in an initiative of the past President of LIBER, Professor Elmar Mittler from the Göttingen State and University Library. Professor Mittler asked Dr Elisabeth Niggemann from Die Deutsche Bibliothek to take part in the meeting of the MARC Harmonization Coordinating Committee in Ottawa in May 2001. Following that meeting the LIBER MARC Harmonization Task Force was founded at the LIBER Annual Conference in July 2001 in London. The LIBER MARC Harmonization Task Force held its first meeting on 14 January 2002 at Die Deutsche Bibliothek Frankfurt am Main, with the aim of gaining an overview of format activities in Europe. The group's aim was to concentrate on European developments and to build up stronger cooperation in the library world in order to strengthen Europe's international influence. The LIBER MARC Harmonization Task Force held a second meeting at the IFLA 2002 Conference in Glasgow and discussed the first draft of its report and recommendations to LIBER. After final discussion within the group, this report has been further revised and was submitted to LIBER. The aim of the report is to give an overview of format activities in European countries and to make recommendations to LIBER regarding the use and development of data formats in Europe. The annex includes reports on migration activities from different countries. The report is based on information on data formats collected and compiled on the basis of a questionnaire distributed to the Conference of European National Librarians (CENL. Cataloguing issues were further discussed at the 1st IFLA Meeting of Experts on an International Cataloguing Code held in Frankfurt in July 2003. Further meetings will be held at the IFLA conferences in Buenos Aires (2004 and Seoul (2006.

Goals for a waste management system: a task force report

International Nuclear Information System (INIS)

Bishop, W.

1976-01-01

This task force set out in a holistic way to study societal concerns regarding nuclear waste management, and to seek places where the technology interacts with our social system. The procedures involved in the goals for safe waste management are outlined and the organizations needed to carry them out are considered. The task force concluded that the needs for disposing of the present waste should not dictate the nature of the systems to be designed for the future wastes, and that budgetary considerations should not slow down the waste management in the second time frame (wastes no longer being produced). Other desirable goals, such as independence of waste management system regarding the stability of social institutions, are also discussed

Screening for Syphilis Infection in Pregnancy : US Preventive Services Task Force Reaffirmation Recommendation Statement

NARCIS (Netherlands)

Calonge, Ned; Petitti, Diana B.; DeWitt, Thomas G.; Dietrich, Allen; Gregory, Kimberly D.; Grossman, David; Isham, George; LeFevre, Michael L.; Leipzig, Rosanne; Marion, Lucy N.; Melnyk, Bernadette; Moyer, Virginia A.; Ockene, Judith K.; Sawaya, George F.; Schwartz, J. Sanford; Wilt, Timothy

2009-01-01

Description: Update of the 2004 U. S. Preventive Services Task Force statement about screening for syphilis in pregnancy. Methods: The U. S. Preventive Services Task Force did a targeted literature search for evidence on the benefits of screening, the harms of screening, and the harms of treatment

Report of the Task Force on Computer Charging.

Science.gov (United States)

Computer Co-ordination Group, Ottawa (Ontario).

The objectives of the Task Force on Computer Charging as approved by the Committee of Presidents of Universities of Ontario were: (1) to identify alternative methods of costing computing services; (2) to identify alternative methods of pricing computing services; (3) to develop guidelines for the pricing of computing services; (4) to identify…

TMI-2 [Three Mile Island Unit 2] reactor building dose reduction task force

International Nuclear Information System (INIS)

Daniels, R.S.

1988-01-01

In late October 1982, the director of Three Mile Island Unit 2 (TMI-2) created the dose reduction task force with the objective of identifying the principal radiological sources in the reactor building and recommending actions to minimize the dose to workers on labor-intensive projects. Members of the task force were drawn form various groups at TMI. Findings and recommendations were presented to the US Nuclear Regulatory Commission in a briefing on November 18, 1982. The task force developed a three-step approach toward dose reduction. Step 1 identified the radiological sources. Step 2 modeled the source and estimated its contribution to the general area dose rates. Step 3 recommended actions to achieve dose reductions consistent with general exposure rate goals

Modeling of inter-ribbon tunneling in graphene

OpenAIRE

Van de Put, Maarten L.; Vandenberghe, William G.; Sorée, Bart; Magnus, Wim; Fischetti, Massimo

2015-01-01

The tunneling current between two crossed graphene ribbons is described invoking the empirical pseudopotential approximation and the Bardeen transfer Hamiltonian method. Results indicate that the density of states is the most important factor determining the tunneling current between small (nm) ribbons. The quasi-one dimensional nature of graphene nanoribbons is shown to result in resonant tunneling.

Evaluation of methods to assess push/pull forces in a construction task

NARCIS (Netherlands)

Hoozemans, M J; Van Der Beek, Allard J.; Frings-Dresena, M H; Van der Molen, Henk F.

2001-01-01

The objective of the present study was to determine the validity of methods to assess push/pull forces exerted in a construction task. Forces assessed using a hand-held digital force gauge were compared to those obtained using a highly accurate measuring frame. No significant differences were found

Dosimetry of wires and single ribbons of Iridium 192; Dosimetria de alambres y ribbons individuales de Iridio-192

Energy Technology Data Exchange (ETDEWEB)

Mazzucco, L.D. [Centro Medico Nuclear S.R.L. San Juan (Argentina)

1998-12-31

The objective of this work is in order to present in table formats the dosimetry of wires and single ribbons of Iridium with lengths 1-12 cm for each one linear source along the bisector which is perpendicular at tissue sources (water) computed for linear activity 1 mCi/cm in the case of wires, and 1 mCi/seed for ribbons. The above tables are of direct use, adaptable at particular cases so they facilitate logarithmic graphics of doses in function of the distance for interpolation and use in the treatments planning. It was shown that for two sources with identical linear activity and total length, one of the equidistant seeds at 1 cm (ribbon) and one wire on the other hand, the differences in dose rates in near positions can be about the 15% so corroborating that it is not possible to use wire tables for seeds neither vice versa. Moreover it was elaborated tables of practical direct use for dose rate in water at c Gy/hr for wires and Ribbons 1-12 cm length and from 0.5-10 cm of distance in the perpendicular bisector at the Iridium implant. (Author)

Electronic properties and mechanical strength of β-phosphorene nano-ribbons

Energy Technology Data Exchange (ETDEWEB)

Swaroop, Ram; Bhatia, Pradeep; Kumar, Ashok, E-mail: ashok@cup.ac.in [Centre for Physical Sciences, School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India-151001 (India)

2016-05-06

We have performed first principles calculations to find out the effect of mechanical strain on the electronic properties of zig-zag edged nano ribbons of β-phosphorene. It is found that electronic band-gap get opened-up to 2.61 eV by passivation of the edges of ribbons. Similarly, the mechanical strength is found to be increase from 1.75 GPa to 2.65 GPa on going from unpassivated nano ribbons to passivated ones along with the 2% increase in ultimate tensile strain. The band-gap value of passivated ribbon gets decreased to 0.43 eV on applying strain up to which the ribbon does not break. These tunable properties of β-phospherene with passivation with H-atom and applying mechanical strain offer its use in tunable nano electronics.

Critical Analysis on the Defeat of Task Force Ranger

National Research Council Canada - National Science Library

Day, Clifford

1997-01-01

.... The final stage, UNOSOM II, involved a peace enforcement and nation building mission. On Sunday, 3 October 1993, the relative success of UNOSOM II suddenly turned violent when a US Task Force came under heavy fire from Somali gunmen...

Structure and magnetic properties of Alnico ribbons

Science.gov (United States)

Zhang, Ce; Li, Ying; Han, Xu-Hao; Du, Shuai-long; Sun, Ji-bing; Zhang, Ying

2018-04-01

Al-Ni-Co alloy has been widely applied in various industrial fields due to its excellent thermal and magnetic stability. In this paper, new Al-Ni-Co ribbons are prepared by simple processes combining melt-spinning with annealing, and their phase transition, microstructure and magnetic properties are studied. The results show that after as-spun ribbons are annealed, the grain size of ribbons increases from 1.1 ± 0.3 μm to 4.8 ± 0.8 μm, but still much smaller than that of the bulk Al-Ni-Co alloy manufactured by traditional technologies. In addition, some rod-like Al70Co20Ni10-type, Al9Co2-type and Fe2Nb-type phases are precipitated at grain boundaries; simultaneously, the distinct spinodal decomposition microstructure with periodic ingredient variation is thoroughly formed in all grains by the reaction of α → α1 + α2. Furthermore, the α1 and α2 distribute alternately like a maze, the Fe-Co-rich α1 phase holds 35.9-47.3 vol%, while the Al-Ni-rich α2 phase occupies the rest. Finally, the coercivity of annealed ribbons can reach to 485.3 ± 76.6 Oe. If the annealed ribbons are further aged at 560 °C, their Hc even increases to 738.1 ± 81.0 Oe. The coercivity mechanism is discussed by the combination of microstructure and domain structure.

Status of the new initiative task force work

International Nuclear Information System (INIS)

Sheffield, J.

1992-01-01

The proposal for a open-quotes New Initiatives Task Forceclose quotes emerged from discussions in the scientific community on how to proceed following the demise of the Burning Plasma Experiment (BPX). In particular, the action of the Secretary of Energy Advisory Board (SEAB), which made the following recommendation in 1991, prompted the initiative: open-quotes Concept exploration should begin to define a new experiment in the $500 million class for the purpose of scientific study of tokomak improvements (e.g., second stability, steady state, bootstrap current) that could suggest new operating modes for ITER and permit the design of more reactor-desirable follow-ons to ITER.close quotes A New Initiative Task force, was chartered by Princeton Plasma Physics Laboratory in October 1991 to provide oversight in the development of a new experimental initiative and to provide guidance to advocate groups in the following areas: programmatic mission and technical objectives, critical issues of physics, engineering, and technology, design criteria, costing, and modes of operation. The guidance was designed to be based on broad community involvement. In addition, the Task Force was asked to identify the preferred options which could proceed to the design stage. Three primary machine designs have emerged from the work of this group, and they are briefly described. 4 refs., 2 figs., 2 tabs

Synaptic ribbon. Conveyor belt or safety belt?

Science.gov (United States)

Parsons, T D; Sterling, P

2003-02-06

The synaptic ribbon in neurons that release transmitter via graded potentials has been considered as a conveyor belt that actively moves vesicles toward their release sites. But evidence has accumulated to the contrary, and it now seems plausible that the ribbon serves instead as a safety belt to tether vesicles stably in mutual contact and thus facilitate multivesicular release by compound exocytosis.

Report of the Task Force on radiopharmaceuticals

International Nuclear Information System (INIS)

Lacker, D.K.; Porter, B.J.; Watkins, G.

1975-01-01

The procedures for evaluation of IND and NDA applications were reviewed by FDA and the state members of the Task Force believe that there is significant progress being made toward expeditious handling of these items. Progress toward publication of the final rule on radiopharmaceuticals has reduced the need for state regulatory activity in investigational aspects of radiopharmaceutical research to the point that the original concept for the training is no longer valid

PAEA Accreditation Task Force Briefing Paper: Moving Toward Profession-Defined, Outcomes-Based Accreditation.

Science.gov (United States)

Bondy, Mary Jo; Fletcher, Sara; Lane, Steven

2017-12-01

In anticipation of a revision to the Standards for Accreditation, the Phyisician Assistant Education Association (PAEA) charged a small task force to develop a strategy for engaging its members in the revision process. Rather than focusing on the current Standards, the task force members recommend a backward design approach to determine the desired outcomes of a successful revision to the Standards. Ultimately, the group believes that shifting to a profession-defined, outcomes-based model for accreditation will allow for greater innovation in physician assistant education and reduce the strain on programs facing resource limitations, particularly clinical site shortages. Task force members value accreditation and urge a paradigm shift in the Standards revision process to focus on meaningful educational outcomes that lead to enhanced program quality and patient safety.

Interagency task force on the health effects of ionizing radiation. final report

International Nuclear Information System (INIS)

1979-06-01

This is the final report of the task force and incorporates the findings and recommendations of six smaller work groups, each with a more specific focus; i.e., science, privacy, care and benefits, exposure reduction, public information, and institutional arrangements. A research agenda that could provide some answers to questions about the effects of low-level radiation is proposed, along with recommendations to facilitate research. A public information program is outlined. Recommendations are advanced to improve systems that deliver care and benefits to those who may have been injured by exposure to radiation, and proposals for steps that might reduce unnecessary radiation exposure in the future are identified. The task force also recommends measures to institutionalize the interagency cooperation that characterized the task force. Three tables and one figure show the collective estimates of the U.S. general population, Federal research financing, cancer linked to radiation in particular populations, and a general dose-response model

Army Energy Initiatives Task Force Industry Summit (portfolio)

Science.gov (United States)

2011-11-03

IY Q N’ZWrt• r Q N’ZWarte US Army Kw•J•I•Io. Atoll. R•public of Monhollltl.nd• fotta..a..,.,., Puerto Rico a (11Jf:!;!6£1) Assistant...Turbine Engines Vehicle connected microgrid to provide assured power Low Speed Electric Vehicles 11 Vehicle Power Energy Initiatives Task Force

77 FR 39724 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Science.gov (United States)

2012-07-05

...-DS61200000] U.S. Coral Reef Task Force Public Meeting and Public Comment AGENCY: Fish and Wildlife Service... Wildlife Service (Service), announce a public meeting of the U.S. Coral Reef Task Force (USCRTF) and a... strengthen U.S. government actions to better preserve and protect coral reef ecosystems. The Departments of...

Adaptive increase in force variance during fatigue in tasks with low redundancy.

Science.gov (United States)

Singh, Tarkeshwar; S K M, Varadhan; Zatsiorsky, Vladimir M; Latash, Mark L

2010-11-26

We tested a hypothesis that fatigue of an element (a finger) leads to an adaptive neural strategy that involves an increase in force variability in the other finger(s) and an increase in co-variation of commands to fingers to keep total force variability relatively unchanged. We tested this hypothesis using a system with small redundancy (two fingers) and a marginally redundant system (with an additional constraint related to the total moment of force produced by the fingers, unstable condition). The subjects performed isometric accurate rhythmic force production tasks by the index (I) finger and two fingers (I and middle, M) pressing together before and after a fatiguing exercise by the I finger. Fatigue led to a large increase in force variance in the I-finger task and a smaller increase in the IM-task. We quantified two components of variance in the space of hypothetical commands to fingers, finger modes. Under both stable and unstable conditions, there was a large increase in the variance component that did not affect total force and a much smaller increase in the component that did. This resulted in an increase in an index of the force-stabilizing synergy. These results indicate that marginal redundancy is sufficient to allow the central nervous system to use adaptive increase in variability to shield important variables from effects of fatigue. We offer an interpretation of these results based on a recent development of the equilibrium-point hypothesis known as the referent configuration hypothesis. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

75 FR 59698 - Federal Advisory Committee; Department of Defense Task Force on the Care, Management, and...

Science.gov (United States)

2010-09-28

... for the continuous improvements of such policies and programs. The Task Force, pursuant to section 724...-medical case management; iv. The disability evaluation process for members of the Armed Forces; v... Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Member of...

Experimental investigation of the ribbon-array ablation process

International Nuclear Information System (INIS)

Li Zhenghong; Xu Rongkun; Chu Yanyun; Yang Jianlun; Xu Zeping; Ye Fan; Chen Faxin; Xue Feibiao; Ning Jiamin; Qin Yi; Meng Shijian; Hu Qingyuan; Si Fenni; Feng Jinghua; Zhang Faqiang; Chen Jinchuan; Li Linbo; Chen Dingyang; Ding Ning; Zhou Xiuwen

2013-01-01

Ablation processes of ribbon-array loads, as well as wire-array loads for comparison, were investigated on Qiangguang-1 accelerator. The ultraviolet framing images indicate that the ribbon-array loads have stable passages of currents, which produce axially uniform ablated plasma. The end-on x-ray framing camera observed the azimuthally modulated distribution of the early ablated ribbon-array plasma and the shrink process of the x-ray radiation region. Magnetic probes measured the total and precursor currents of ribbon-array and wire-array loads, and there exists no evident difference between the precursor currents of the two types of loads. The proportion of the precursor current to the total current is 15% to 20%, and the start time of the precursor current is about 25 ns later than that of the total current. The melting time of the load material is about 16 ns, when the inward drift velocity of the ablated plasma is taken to be 1.5 × 10 7 cm/s.

Revitalizing Rural Washington: Report and Recommendations of the Governor's Task Force on Rural Affairs.

Science.gov (United States)

Governor's Task Force on Rural Affairs, Olympia, WA.

Recognizing that urban and rural problems are interconnected, the Governor's Advisory Council on Urban Affairs (State of Washington), made a recommendation that led to formation (in 1970) of the Task Force on Rural Affairs. The report of that task force identifies the continuing technological revolution in agriculture as an important cause of (1)…

7 CFR 1900.6 - Chair, Loan Resolution Task Force.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Chair, Loan Resolution Task Force. 1900.6 Section 1900.6 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF...

76 FR 22685 - Interagency Management Task Force Public Meeting

Science.gov (United States)

2011-04-22

... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Interagency Management Task Force Public Meeting AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy (DOE.../events.html for the time, location, agenda, and related materials of the meetings. The purpose of the...

Can augmented force feedback facilitate virtual target acquisition tasks?

NARCIS (Netherlands)

Houtsma, A.J.M.; Keuning - van Oirschot, H.; Westwood, J.D.; Haluck, R.S.

2006-01-01

This study investigates facilitation of a manual target acquisition task by the application of appropriate force feedback through the control device (e.g., mouse, joystick, trackball). Typical manual movements with these devices were measured, and models of such movements were used to predict an

77 FR 23667 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Science.gov (United States)

2012-04-20

... Recommendation Development Review of Services for PTSD TBI. 2-2:15 p.m. Break. 2:15-4 p.m. Task Force...-3:15 p.m. Break. 3:15-5 p.m. Task Force Recommendation Development Review of Transition Outcomes, Do...: Wednesday, May 16, 2012 8-8:30 a.m. Public Forum. 8:30-9:30 a.m. Task Force Recommendation Development...

Assessing Tuition- and Debt-Free Higher Education. NASFAA Task Force Report

Science.gov (United States)

National Association of Student Financial Aid Administrators, 2017

2017-01-01

The Assessing Tuition- and Debt-Free Higher Education Task Force was convened in July 2016. Charged by the National Association of Student Financial Aid Administrators's (NASFAA's) Board of Directors with evaluating the existing landscape of state and local promise programs with a focus on scaling such models to the national level, the task force…

TMI-2 Lessons Learned Task Force. Final report

International Nuclear Information System (INIS)

1979-10-01

In its final report reviewing the Three Mile Island accident, the TMI-2 Lessons Learned Task Force has suggested change in several fundamental aspects of basic safety policy for nuclear power plants. Changes in nuclear power plant design and operations and in the regulatory process are discussed in terms of general goals. The appendix sets forth specific recommendations for reaching these goals

Blue Ribbon Panel Report

Science.gov (United States)

An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

Army Task Force on Behavioral Health: Corrective Action Plan

Science.gov (United States)

2013-01-01

Veterans Affairs Legal Section KNOWLEDGE MGMT SECTION • KMO • CAA Analyst Figure I-1. Task Force Organization. ACRONYM Key ASA(M&RA): Assistant...Army Audit Agency OTIG: Office of the Inspector General OTSG: Office of the Surgeon General KMO : Knowledge Management Officer CAA: Center for

How effective are task forces in tackling illegal logging? Empirical evidence from Ghana

DEFF Research Database (Denmark)

Franck, Marte; Hansen, Christian Pilegaard

2014-01-01

not proven effective in Ghana. The task forces are influenced by corruption; interference by powerful actors; fear of violence; and logistical and resource-related challenges. The paper suggests that effectively addressing illegal logging in Ghana will require a more normative approach that involves policy...... reforms addressing fundamental issues such as rights to trees and benefits from them. Without such reforms, timber task forces as well as other types of “hard” law enforcement become illusive....

Task Force 1. Report of the Task Force on Patient Expectations, Core Values, Reintegration, and the New Model of Family Medicine

Science.gov (United States)

Green, Larry A.; Graham, Robert; Bagley, Bruce; Kilo, Charles M.; Spann, Stephen J.; Bogdewic, Stephen P.; Swanson, John

2004-01-01

BACKGROUND To lay the groundwork for the development of a comprehensive strategy to transform and renew the specialty of family medicine, this Future of Family Medicine task force was charged with identifying the core values of family medicine, developing proposals to reform family medicine to meet consumer expectations, and determining systems of care to be delivered by family medicine in the future. METHODS A diverse, multidisciplinary task force representing a broad spectrum of perspectives and expertise analyzed and discussed published literature; findings from surveys, interviews, and focus groups compiled by research firms contracted to the Future of Family Medicine project; and analyses from The Robert Graham Center, professional societies in the United States and abroad, and others. Through meetings, conference calls, and writing, and revision of a series of subcommittee reports, the entire task force reached consensus on its conclusions and recommendations. These were reviewed by an external panel of experts and revisions were made accordingly. MAJOR FINDINGS After delivering on its promise to reverse the decline of general practice in the United States, family medicine and the nation face additional challenges to assure all people receive care that is safe, effective, patient-centered, timely, efficient, and equitable. Challenges the discipline needs to address to improve family physicians’ ability to make important further contributions include developing a broader, more accurate understanding of the specialty among the public and other health professionals, addressing the wide scope and variance in practice types within family medicine, winning respect for the specialty in academic circles, making family medicine a more attractive career option, and dealing with the perception that family medicine is not solidly grounded in science and technology. The task force set forth a proposed identity statement for family medicine, a basket of services that

Force control tasks with pure haptic feedback promote short-term focused attention.

Science.gov (United States)

Wang, Dangxiao; Zhang, Yuru; Yang, Xiaoxiao; Yang, Gaofeng; Yang, Yi

2014-01-01

Focused attention has great impact on our quality of life. Our learning, social skills and even happiness are closely intertwined with our capacity for focused attention. Attention promotion is replete with examples of training-induced increases in attention capability, most of which rely on visual and auditory stimulation. Pure haptic stimulation to increase attention capability is rarely found. We show that accurate force control tasks with pure haptic feedback enhance short-term focused attention. Participants were trained by a force control task in which information from visual and auditory channels was blocked, and only haptic feedback was provided. The trainees were asked to exert a target force within a pre-defined force tolerance for a specific duration. The tolerance was adaptively modified to different levels of difficulty to elicit full participant engagement. Three attention tests showed significant changes in different aspects of focused attention in participants who had been trained as compared with those who had not, thereby illustrating the role of haptic-based sensory-motor tasks in the promotion of short-term focused attention. The findings highlight the potential value of haptic stimuli in brain plasticity and serve as a new tool to extend existing computer games for cognitive enhancement.

THE NATURE OF FLARE RIBBONS IN CORONAL NULL-POINT TOPOLOGY

International Nuclear Information System (INIS)

Masson, S.; Aulanier, G.; Pariat, E.; Schrijver, C. J.

2009-01-01

Flare ribbons are commonly attributed to the low-altitude impact, along the footprints of separatrices or quasi-separatrix layers (QSLs), of particle beams accelerated through magnetic reconnection. If reconnection occurs at a three-dimensional coronal magnetic null point, the footprint of the dome-shaped fan surface would map a closed circular ribbon. This paper addresses the following issues: does the entire circular ribbon brighten simultaneously, as expected because all fan field lines pass through the null point? And since the spine separatrices are singular field lines, do spine-related ribbons look like compact kernels? What can we learn from these observations about current sheet formation and magnetic reconnection in a null-point topology? The present study addresses these questions by analyzing Transition Region and Coronal Explorer and Solar and Heliospheric Observatory/Michelson Doppler Imager observations of a confined flare presenting a circular ribbon. Using a potential field extrapolation, we linked the circular shape of the ribbon with the photospheric mapping of the fan field lines originating from a coronal null point. Observations show that the flare ribbon outlining the fan lines brightens sequentially along the counterclockwise direction and that the spine-related ribbons are elongated. Using the potential field extrapolation as initial condition, we conduct a low-β resistive magnetohydrodynamics simulation of this observed event. We drive the coronal evolution by line-tied diverging boundary motions, so as to emulate the observed photospheric flow pattern associated with some magnetic flux emergence. The numerical analysis allows us to explain several observed features of the confined flare. The vorticity induced in the fan by the prescribed motions causes the spines to tear apart along the fan. This leads to formation of a thin current sheet and induces null-point reconnection. We also find that the null point and its associated topological

Black Silicon Solar Cells with Black Ribbons

DEFF Research Database (Denmark)

Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

2016-01-01

We present the combination of mask-less reactive ion etch (RIE) texturing and blackened interconnecting ribbons as a method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon made by mask-less reactive ion etching has total, average...... in the range 15.7-16.3%. The KOH-textured reference cell had an efficiency of 17.9%. The combination of black Si and black interconnecting ribbons may result in aesthetic, all-black panels based on conventional, front-contacted silicon solar cells....... reflectance below 0.5% across a 156x156 mm2 silicon (Si) wafer. Black interconnecting ribbons were realized by oxidizing copper resulting in reflectance below 3% in the visible wavelength range. Screen-printed Si solar cells were realized on 156x156 mm2 black Si substrates with resulting efficiencies...

Plastic deformation of silicon dendritic web ribbons during the growth

Science.gov (United States)

Cheng, L. J.; Dumas, K. A.; Su, B. M.; Leipold, M. H.

1984-01-01

The distribution of slip dislocations in silicon dendritic web ribbons due to plastic deformation during the cooling phase of the growth was studied. The results show the existence of two distinguishable stress regions across the ribbon formed during the plastic deformation stage, namely, shear stress at the ribbon edges and tensile stress at the middle. In addition, slip dislocations caused by shear stress near the edges appear to originate at the twin plane.

Flare Ribbons Approach Observed by the Interface Region Imaging Spectrograph and the Solar Dynamics Observatory

Energy Technology Data Exchange (ETDEWEB)

Li, Ting; Zhang, Jun; Hou, Yijun, E-mail: liting@nao.cas.cn [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China)

2017-10-10

We report flare ribbons approach (FRA) during a multiple-ribbon M-class flare on 2015 November 4 in NOAA AR 12443, obtained by the Interface Region Imaging Spectrograph and the Solar Dynamics Observatory. The flare consisted of a pair of main ribbons and two pairs of secondary ribbons. The two pairs of secondary ribbons were formed later than the appearance of the main ribbons, with respective time delays of 15 and 19 minutes. The negative-polarity main ribbon spread outward faster than the first secondary ribbon with the same polarity in front of it, and thus the FRA was generated. Just before their encounter, the main ribbon was darkening drastically and its intensity decreased by about 70% in 2 minutes, implying the suppression of main-phase reconnection that produced two main ribbons. The FRA caused the deflection of the main ribbon to the direction of secondary ribbon with a deflection angle of about 60°. A post-approach arcade was formed about 2 minutes later and the downflows were detected along the new arcade with velocities of 35–40 km s{sup −1}, indicative of the magnetic restructuring during the process of FRA. We suggest that there are three topological domains with footpoints outlined by the three pairs of ribbons. Close proximity of these domains leads to deflection of the ribbons, which is in agreement with the magnetic field topology.

The states/BC oil spill task force - an international model for formulating and influencing public policy

International Nuclear Information System (INIS)

Neel, J.; Bones, J.; Dimmick, E.; Kent, L.J.T.; Dunstan, R.; Sutherland, B.

1993-01-01

The States/British Columbia Oil Spill Task Force was established in 1989 to enhance spill coordination among the West Coast states and British Columbia, and to address a number of issues that became apparent during the Nestucca barge and Exxon Valdez oil spills. Task Force members are the directors of the oil spill prevention and response agencies in Alaska, British Columbia, California, Oregon, and Washington. The Task Force has become a national model for facilitating cooperation and building consensus between coastal states and provinces and their federal governments. In October of 1990, the task force issued a report containing a comprehensive set of recommendations addressing oil spill prevention, preparedness, and response. The group had achieved remarkable consensus, and many of the report's recommendations have been included in recent legislation enacted by the member states. The success of the task force's approach to regional coordination has also reduced the need for a proposed Pacific Oceans Resources Interstate Compact, which has been proposed to expand the states' role in areas of regulation that are otherwise federally preempted. The task force has become an effective mechanism for developing vigorous, productive relationships between government agencies, industry, and the public in both the United States and Canada. It has created important linkages between state provincial antifederal regulatory activities; for example, by providing input to Coast Guard and EPA rulemaking that implemented the Oil Pollution Act of 1990. The task force is continuing to advance its goals of promoting public policy on oil spill prevention; cooperative management of major spills by government and industry; protection of the states provincial rights and their natural and economic resources; and inter-governmental consistency in regulations adopted for oil spill prevention, contingency planning, and resource damage assessment

Flexible Training Strategy (National Task Force on Medical Staffing)

OpenAIRE

Department of Health (Ireland)

2003-01-01

Flexible Training Strategy (National Task Force on Medical Staffing) The Flexible Training Strategy, while endorsing flexible/part-time options recognises that the preferred option for the majority of doctors-in-training and consultants is most likely to continue to be full-time training and work. Click here to download PDF

International confederation for cleft lip and palate and related craniofacial anomalies task force report: holistic outcomes.

Science.gov (United States)

Broder, Hillary L

2014-11-01

Objective : This paper describes the process and outcomes of the 2013 American Cleft Palate-Craniofacial Association task force on Holistic Outcomes. The goals and membership of the task force are presented. Methods : Using internet communication, the group introduced themselves, shared ideas and information related to holistic assessment and implementation of using a validated holistic measure, the Child Oral Health Impact Profile (COHIP) at participating international sites. Results : Data from the sites were analyzed using descriptive statistics. Administration of the COHIP was successful. It varied from self-completion as well as verbal presentation due to language differences and a function of the short time period to complete collection. Additionally qualitative comments were reported by the task force site directors. Conclusions : Future directions for holistic assessment and communication among task force members and sites were discussed at the Congress and are presented in this report.

Inter-ribbon tunneling in graphene: An atomistic Bardeen approach

Energy Technology Data Exchange (ETDEWEB)

Van de Put, Maarten L., E-mail: maarten.vandeput@uantwerpen.be; Magnus, Wim [Department of Physics, Universiteit Antwerpen, B-2020 Antwerpen (Belgium); imec, B-3001 Heverlee (Belgium); Vandenberghe, William G.; Fischetti, Massimo V. [Department of Material Science, University of Texas at Dallas, Texas 75080 (United States); Sorée, Bart [Department of Physics, Universiteit Antwerpen, B-2020 Antwerpen (Belgium); imec, B-3001 Heverlee (Belgium); Department of Electrical Engineering, KU Leuven, B-3001 Leuven (Belgium)

2016-06-07

A weakly coupled system of two crossed graphene nanoribbons exhibits direct tunneling due to the overlap of the wavefunctions of both ribbons. We apply the Bardeen transfer Hamiltonian formalism, using atomistic band structure calculations to account for the effect of the atomic structure on the tunneling process. The strong quantum-size confinement of the nanoribbons is mirrored by the one-dimensional character of the electronic structure, resulting in properties that differ significantly from the case of inter-layer tunneling, where tunneling occurs between bulk two-dimensional graphene sheets. The current-voltage characteristics of the inter-ribbon tunneling structures exhibit resonance, as well as stepwise increases in current. Both features are caused by the energetic alignment of one-dimensional peaks in the density-of-states of the ribbons. Resonant tunneling occurs if the sign of the curvature of the coupled energy bands is equal, whereas a step-like increase in the current occurs if the signs are opposite. Changing the doping modulates the onset-voltage of the effects as well as their magnitude. Doping through electrostatic gating makes these structures promising for application towards steep slope switching devices. Using the atomistic empirical pseudopotentials based Bardeen transfer Hamiltonian method, inter-ribbon tunneling can be studied for the whole range of two-dimensional materials, such as transition metal dichalcogenides. The effects of resonance and of step-like increases in the current we observe in graphene ribbons are also expected in ribbons made from these alternative two-dimensional materials, because these effects are manifestations of the one-dimensional character of the density-of-states.

Answers to questions posed by the Michigan Governor's Nuclear Waste Disposal Task Force

International Nuclear Information System (INIS)

1976-01-01

A general presentation of the National Waste Terminal Storage (NWTS) Program was given on July 26, 1976, to the Michigan Environmental Review Board and the Michigan Governor's Nuclear Waste Disposal Task Force. Following the presentation, Dr. William G. Taylor, Chairman of the Task Force, provided ERDA with a listing of questions which pertained to the NWTS program and ERDA/OWI's interest in northeast Michigan. This document contains copies of the information which was provided to Dr. Taylor in response to his inquiry

Die zukünftige Ausrichtung der AGMB: ein Bericht aus der Task-Force / The future strategic concept of the AGMB: a preliminary report given by the task force

Directory of Open Access Journals (Sweden)

Kintzel, Melanie

2008-12-01

Full Text Available In the spring of 2008 the managing-committee of the Medical Library Association (AGMB invited the members to form a task force in order to concentrate on a new strategic concept for the association and develop corresponding recommendations and visions. Stagnating attendance at the association’s annual conferences in recent years as well as difficulties in finding future venues and new candidates for the elections to the board gave reason to this scheme. This article introduces the members of the task force and their work hitherto with a special focus on the member survey conducted in the summer of 2008 and its first results.

Urban Consortium Energy Task Force - Year 21 Final Report

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-04-01

The Urban Consortium Energy Task Force (UCETF), comprised of representatives of large cities and counties in the United States, is a subgroup of the Urban Consortium, an organization of the nation's largest cities and counties joined together to identify, develop and deploy innovative approaches and technological solutions to pressing urban issues.

78 FR 29378 - Aquatic Nuisance Species Task Force; Public Teleconference/Webinar

Science.gov (United States)

2013-05-20

... Invasive Species Awareness Week, Michigan and Mississippi ANS Management Plans, and Asian Carp Surveillance....gov . Dated: May 14, 2013. Jeffrey Underwood, Acting Co-Chair, Aquatic Nuisance Species Task Force...

After the Ribbon Cutting

DEFF Research Database (Denmark)

Hodge, Graeme A.; Boulot, Emille; Duffield, Colin

2017-01-01

Much attention has gone towards ‘up-front’ processes when delivering infrastructure public–private partnerships (PPPs), but less on how to best govern after the ribbon is cut and the infrastructure built. This paper identifies the primary contractual and institutional governance challenges arising...

A compilation of minutes for the Stripa task force on fracture flow modelling

International Nuclear Information System (INIS)

Hodgkinson, D.

1992-01-01

This report is a compilation of minutes from the nine meetings of the Stripa task force on fracture flow modelling, held at various locations around the world from February 1988 to December 1991. The task force was set up as a peer review group with the specific objectives of 1. recommending criteria for the verification and validation of fracture flow models, 2. facilitating the dissemination of information to countries participating in the Stripa project, and 3. coordinating the work of the three modelling groups form AEA Harwell, Golder Associates and Lawrence Berkeley Laboratory. The report provides a detailed technical commentary of the interplay between the development and application of mathematical models, and the design, execution and interpretation of experiment, within a structured project management framework. In particular, the task force has pioneered the definition and implementation of a validation process and associated criteria based on the analysis of a wide range of experimental data. (au)

Status Report of the Inter-Laboratory Task Force on Remote Operation

International Nuclear Information System (INIS)

Phinney, Nan

2001-01-01

The next generation of particle accelerators will be major projects which may require a new mode of international and inter-laboratory collaboration. They are likely to be too costly to be funded by a single nation and too large to be built by a single laboratory. The tremendous technical challenge of a new facility requires a critical mass of highly qualified and experienced physicists and engineers. These experts are presently distributed among the major accelerator centers around the world and it is believed important to maintain and develop this broad base of expertise. The successful accelerator technology development of recent decades depended on extensive exchange of people with complementary technical skills. Therefore, it is desirable and probably necessary that several accelerator laboratories will participate in any future project. A consequence of a multi-laboratory project is that the accelerator will be located a considerable distance from most of the contributing institutions which design, build and operate it. These considerations led the International Committee for Future Accelerators to initiate a study on the general and technical implications of such a collaboration. Two task forces were formed in February 2000 to conduct this study and they were asked to prepare a report on a time scale of one year. The task force on Remote Operation included members from most of the major accelerator laboratories around the world with expertise on accelerator operation, controls software, communication technologies, hardware design and maintenance. The task force members gathered information from the experts at their own institutions and from available experience in other fields, particularly astronomy. The task force on Remote Operations began by developing a model for an international multi-laboratory collaboration to construct and operate an accelerator facility. This model is described in section 3. While it is clear that there are numerous alternative

Position of the IBEX ribbon as a key to understand its origin

Science.gov (United States)

Swaczyna, Pawel; Bzowski, Maciej; Sokół, Justyna M.; Christian, Eric R.; Funsten, Herbert O.; McComas, David J.; Schwadron, Nathan A.

2017-04-01

Observations of the energetic neutral atom (ENA) emission by the Interstellar Boundary Explorer (IBEX) allow for remote sensing of the plasma properties in heliosheath. The first IBEX results revealed an unexpected arc-like enhancement of the ENA flux in the sky, dubbed the IBEX ribbon. This discovery led to formulation of more than a dozen hypotheses on its origin. The emission source region proposed in these hypotheses span the heliospheric termination shock up to a hypothetical nearby interface between the Local Interstellar Cloud and a local bay in the Local Bubble. Among these hypotheses is the concept that the ribbon is produced by the secondary ENA mechanism, operating in the outer heliosheath. The observational strategy of IBEX allows observation of the same part of the sky from the opposite sides of the Sun every six months and thus provides parallax viewing with a baseline of 2 AU. After correcting the observations for the Compton-Getting effect and for gravitational deflection and radiation pressure, we use this parallax viewing to precisely determine the apparent position of the maximum flux associated with the ribbon. We find that the ribbon peak position differs semi-annually by an angle of 0.41±0.15 deg, which we interpret as the parallax effect. This angle corresponds to a distance of 140-38+84 AU, and thus suggests that most likely the ribbon's source is located just beyond the heliopause. Comparison of the IBEX ribbon position in five energy steps of IBEX-Hi shows a systematic shift, which changes the position of the ribbon center by ˜10 deg. We find that it can be explained using an analytic model of the secondary ENA mechanism with the neutralized supersonic solar wind as the source of the primary ENAs, which are ionized in the outer heliosheath, picked up by the ambient magnetic field, and eventually re-neutralized (as originally conceived, McComas et al. 2009). We use a realistic model of the solar wind evolution dependent on heliographic

Can NATO's new very high readiness joint task force deter?

DEFF Research Database (Denmark)

Rynning, Sten; Ringsmose, Jens

2017-01-01

When NATO-allies met at their Wales summit in September 2014, the D-word was back in vogue. Not in a muttering, shy or implicit way, but unambiguously and straightforward. For the first time in more than two decades NATO’s heads of states and governments openly discussed how best to “deter......” a distinct strategic rival – Russia. Chief among the Welsh summit initiatives was the decision to set up a new multinational spearhead force – the Very High Readiness Joint Task Force (VJTF) – as part of an enhanced NATO Response Force (NRF) and within the framework of a so-called Readiness Action Plan (RAP...

Interim report of the task force on energy policy

International Nuclear Information System (INIS)

2001-01-01

A Task Force was established by the Premier of British Columbia in August 2001 to draft an energy policy framework for the province. Based on best practices worldwide, and keeping in mind the specific energy needs of British Columbia, this framework aims at fostering energy development in British Columbia, in accordance with exemplary environmental practices. This interim report comprises the preliminary findings of the Task Force, and public input is sought before the final report is finalized and presented to government. The energy sector of British Columbia comprises hydroelectric power, oil, gas and coal resources. In addition, green energy and alternative energy technologies are being developed, such as wind, solar, and wave power, and hydrogen fuel cells. Industry and individual consumers are well served by the highly developed transmission and distribution systems for energy. Several strategic directions were identified by the Task Force for inclusion in the energy policy of British Columbia, to meet its full potential. They are: growth to ensure safe, reliable energy and take advantage of economic opportunities; diversification; competitiveness; industry restructuring and expansion; environmental imperative; government leadership; and community and First Nations' involvement. Some changes are also required for the continuing success of the energy sector in British Columbia: a move to fully competitive markets in the electricity system, the development of natural gas storage capacity in the Lower Mainland, additional considerations for coal use, and the development of alternative energy sources. It is expected that private capital and more energy supply will result from a fully competitive energy market, which in turn would lower energy costs. Jobs and income would increase as a result of the growth in the sector. Diversification makes good economic and environmental sense. tabs., figs

Bilateral neuromuscular and force differences during a plyometric task.

Science.gov (United States)

Ball, Nick B; Scurr, Joanna C

2009-08-01

The purpose of this article is to compare the bilateral neuromuscular and force contribution during a plyometric bounce drop jump task and to assess the affects of nonsimultaneous foot placement. Sixteen male participants performed bounce drop jumps from a height of 0.4 m. Mean peak electromyography activity of the soleus, medial, and lateral gastrocnemius of both legs was recorded from each phase of the drop jump and normalized to a reference dynamic muscle action. Resultant ground reaction force, ground contact time, and duration of the drop jumps were recorded from each leg. Multivariate analysis of variance was used to compare bilateral electromyographic activity, resultant peak ground reaction force, and contact duration. Pearson's correlations (r) ascertained relationships between normalized electromyographic activity and contact time. Significant differences were shown between left and right triceps surae normalized electromyography during precontact and contact40ms (p 0.01). Significant differences were found between normalized soleus electromyography and both gastrocnemii for both legs during precontact (p 0.01). Weak relationships were found between normalized electromyographic activity and nonsimultaneous foot contact (r < 0.2). This study showed differences between left and right triceps surae in neuromuscular strategies engaged in the early stages of a drop jump task. Differences in contact time initiation were present; however, they are not significant enough to cause neuromuscular differences in the plantar flexor muscles.

SPI Project Criticality Task Force initial review and assessment

International Nuclear Information System (INIS)

McKinley, K.B.; Cannon, J.W.; Marsden, R.S.; Worle, H.A.

1980-03-01

The Slagging Pyrolysis Incinerator (SPI) Facility is being developed to process transuranic waste stored and buried at the Idaho National Engineering Laboratory (INEL) into a chemically inert, physically stable, basalt-like residue acceptable for a Federal Repository. A task force was established by the SPI Project Division to review and assess all aspects of criticality safety for the SPI Facility. This document presents the initial review, evaluations, and recommendations of the task force and includes the following: background information on waste characterization, and criticality control approaches and philosophies, a description of the SPI Facility Waste Processing Building, a review and assessment of potentially relevant codes and regulations; a review and assessment of the present state of criticality and assaying/monitoring studies, and recommendations for changes in and additions to these studies. The review and assessment of potentially relevant codes and regulations indicate that ERDAM 0530, Nuclear Criticality Safety should be the controlling document for criticality safety for the SPI Project. In general, the criticality control approaches and philosophies for the SPI Project comply with this document

CHANGE@CERN:Task Force 2: reshaping for the future

CERN Multimedia

2002-01-01

Second in our series reviewing the Task Forces reports. How to lay the foundations for a more efficient organisational structure. Our present organization is based on sixteen Divisions and units under the Directorate. CERN's organization is based on a Directorate and sixteen Divisions and units, while its activities are broadly divided into four Sectors: Research, Accelerators, Technical and Administration. The mandate of Task Force 2, led by Horst Wenninger, was to identify if a structural change and a reduction of duplicated efforts could result in an increased efficiency at CERN, especially as the Laboratory continues to focus its resources on the LHC. 'This is the most difficult project ever undertaken at CERN', acknowledges Wenninger, 'a double accelerator at a temperature of 1.9 K'. For the next five years the success of the LHC must be the main priority, and CERN will have to adapt the procedures of how it works. Wenninger sees the process as an opportunity for the Laboratory to move into the 21st c...

TWTF project criticality task force final review and assessment

International Nuclear Information System (INIS)

McKinley, K.B.; Cannon, J.W.; Wheeler, F.J.; Worle, H.A.

1980-11-01

The Transuranic Waste Treatment Facility (TWTF) is being developed to process transuranic waste, stored and buried at the Idaho National Engineering Laboratory, into a chemically inert, physically stable basalt-like residue acceptable at a federal repository. A task force was assembled by the TWTF Project Division to review and assess all aspects of criticality safety for the TWTF. This document presents the final review, assessments, and recommendations of this task force. The following conclusions were made: Additional criticality studies are needed for the entire envelope of feed compositions and temperature effects. Safe operating k/sub eff/'s need to be determined for process components. Criticality analyses validation experiments may also be required. SRP neutron interrogation should be replaced by DDT neutron interrogation. Accuracy studies need to be performed for the proposed assaying techniques. Time-correlated neutron monitoring needs to be mocked up for process components to prove feasibility and determine accuracy. The criticality control techniques developed for the TWTF conceptual design are in compliance with ERDAM 0530, including the Double Contingency Rule. Detailed procedures and controls need to be developed

AAPM/SNMMI Joint Task Force: report on the current state of nuclear medicine physics training

Science.gov (United States)

Allison, Jerry D.; Clements, Jessica B.; Coffey, Charles W.; Fahey, Frederic H.; Gress, Dustin A.; Kinahan, Paul E.; Nickoloff, Edward L.; Mawlawi, Osama R.; MacDougall, Robert D.; Pizzuitello, Robert J.

2015-01-01

The American Association of Physicists in Medicine (AAPM) and the Society of Nuclear Medicine and Molecular Imaging (SNMMI) recognized the need for a review of the current state of nuclear medicine physics training and the need to explore pathways for improving nuclear medicine physics training opportunities. For these reasons, the two organizations formed a joint AAPM/SNMMI Ad Hoc Task Force on Nuclear Medicine Physics Training. The mission of this task force was to assemble a representative group of stakeholders to: Estimate the demand for board‐certified nuclear medicine physicists in the next 5–10 years,Identify the critical issues related to supplying an adequate number of physicists who have received the appropriate level of training in nuclear medicine physics, andIdentify approaches that may be considered to facilitate the training of nuclear medicine physicists. As a result, a task force was appointed and chaired by an active member of both organizations that included representation from the AAPM, SNMMI, the American Board of Radiology (ABR), the American Board of Science in Nuclear Medicine (ABSNM), and the Commission for the Accreditation of Medical Physics Educational Programs (CAMPEP). The Task Force first met at the AAPM Annual Meeting in Charlotte in July 2012 and has met regularly face‐to‐face, online, and by conference calls. This manuscript reports the findings of the Task Force, as well as recommendations to achieve the stated mission. PACS number: 01.40.G‐ PMID:26699325

Mena–GRASP65 interaction couples actin polymerization to Golgi ribbon linking

Science.gov (United States)

Tang, Danming; Zhang, Xiaoyan; Huang, Shijiao; Yuan, Hebao; Li, Jie; Wang, Yanzhuang

2016-01-01

In mammalian cells, the Golgi reassembly stacking protein 65 (GRASP65) has been implicated in both Golgi stacking and ribbon linking by forming trans-oligomers through the N-terminal GRASP domain. Because the GRASP domain is globular and relatively small, but the gaps between stacks are large and heterogeneous, it remains puzzling how GRASP65 physically links Golgi stacks into a ribbon. To explore the possibility that other proteins may help GRASP65 in ribbon linking, we used biochemical methods and identified the actin elongation factor Mena as a novel GRASP65-binding protein. Mena is recruited onto the Golgi membranes through interaction with GRASP65. Depleting Mena or disrupting actin polymerization resulted in Golgi fragmentation. In cells, Mena and actin were required for Golgi ribbon formation after nocodazole washout; in vitro, Mena and microfilaments enhanced GRASP65 oligomerization and Golgi membrane fusion. Thus Mena interacts with GRASP65 to promote local actin polymerization, which facilitates Golgi ribbon linking. PMID:26538023

13th EU-US Transport Task Force Workshop on transport in fusion plasmas

DEFF Research Database (Denmark)

Connor, J.W.; Fasoli, A.; Hidalgo, C.

2009-01-01

This report summarizes the contributions presented at the 13th EU-US Transport Task Force Workshop on transport in fusion plasmas, held in Copenhagen, Denmark, 1-4 September 2008. There were sessions on core heat and particle transport; core and edge momentum transport; edge and scrape-off-layer ......This report summarizes the contributions presented at the 13th EU-US Transport Task Force Workshop on transport in fusion plasmas, held in Copenhagen, Denmark, 1-4 September 2008. There were sessions on core heat and particle transport; core and edge momentum transport; edge and scrape...

The status of silicon ribbon growth technology for high-efficiency silicon solar cells

Science.gov (United States)

Ciszek, T. F.

1985-01-01

More than a dozen methods have been applied to the growth of silicon ribbons, beginning as early as 1963. The ribbon geometry has been particularly intriguing for photovoltaic applications, because it might provide large area, damage free, nearly continuous substrates without the material loss or cost of ingot wafering. In general, the efficiency of silicon ribbon solar cells has been lower than that of ingot cells. The status of some ribbon growth techniques that have achieved laboratory efficiencies greater than 13.5% are reviewed, i.e., edge-defined, film-fed growth (EFG), edge-supported pulling (ESP), ribbon against a drop (RAD), and dendritic web growth (web).

Strategic Change and the Joint Terrorism Task Force: Ideas and Recommendations

National Research Council Canada - National Science Library

D'Angelo, Anthony P

2007-01-01

... and the multidisciplinary Joint Terrorism Task Forces. The terrorist attacks served as a catalyst for evaluating cultural, psychological and organizational processes, policies and procedures that influenced the FBI and impacted the JTTF program...

Scintillating ribbon x-ray detector

International Nuclear Information System (INIS)

Kinchen, B.E.; Rogers, A.

1995-01-01

A patent in the early 1970's by Aerojet Corporation in Sacramento, CA put forth the idea of using an array of scintillating fibers for x-ray detection and imaging. In about 1975, Pratt and Whitney Aircraft in East Hartford, CT designed and manufactured an imaging system based on the patent. The device was 1.75 in thick in the direction of the x-ray beam and about 4 in. by 4 in. square. The device was used with a 8 MeV x-ray source to image and measure internal clearances within operating aircraft, gas turbines engines. There are significant advantages of fiber optic detectors in x-ray detection. However, the advantages are often outweighed by the disadvantages. Two of the advantages of scintillating fiber optic x-ray detectors are: (1) high limiting spatial frequency -- between 20 and 25 lp/mm; and (2) excellent x-ray stopping power -- they can be made thick and retain spatial resolution. In traditional fiber optic detectors the x-rays are oriented parallel to the long axis of the fiber. For the scintillating ribbon x-ray sensor, the x-rays are oriented normal to the fiber long axis. This ribbon sensor technique has a number of advantages over the two current radiographic techniques digital x-radiography and x-ray film: The main advantage the ribbon has is size and shape. It can be as thin as 0.05 in., virtually any width or length, and flexible. Once positioned in a given location, 20 to 100 square inches of the object being inspected can be imaged with a single x-ray beam sweep. It is clear that conventional digital cameras do not lend themselves to placement between walls of aircraft structures or similar items requiring x-ray inspections. A prototype scintillating ribbon x-ray sensor has been fabricated and tested by Synergistic Detector Designs. Images were acquired on corrosion test panels of aluminum fabricated by Iowa State University

75 FR 7197 - Establishing a Task Force on Childhood Obesity

Science.gov (United States)

2010-02-18

... of February 9, 2010 Establishing a Task Force on Childhood Obesity Memorandum for the Heads of Executive Departments and Agencies Across our country, childhood obesity has reached epidemic rates and, as... is committed to redoubling our efforts to solve the problem of childhood obesity within a generation...

Task force on compliance and enforcement. Final report. Volume 2

Energy Technology Data Exchange (ETDEWEB)

1978-03-01

Recommendations for measures to strengthen the FEA enforcement program in the area of petroleum price regulation are presented. Results of task force efforts are presented in report and recommendations sections concerned with pending cases, compliance program organization, enforcement powers, compliance strategy, and audit staffing and techniques. (JRD)

Product Evaluation Task Force Phase Two report for CAGR graphite

International Nuclear Information System (INIS)

Francis, A.J.; Davies, A.

1991-01-01

It has been proposed that all Intermediate Level Wastes arising at Sellafield should be encapsulated prior to ultimate disposal. The Product Evaluation Task Force (PETF) was set up to investigate possible encapsulants and to produce an adequate data base to justify the preferred matrices. This report details the work carried out under Phase 2 of the Product Evaluation Task Force programme, on CAGR graphite. Three possible types of encapsulants for CAGR graphites:-Inorganic cements, Polymer cements and Polymers are evaluated using the Kepner Tregoe decision analysis technique. This technique provides a methodology for scoring and ranking alternative options and evaluating any risks associated with an option. The analysis shows that for all four stages of waste management operations ie Storage, Transport, handling and emplacement, Disposal and Process, cement matrices are considerably superior to other potential matrices. A matrix, consisting of three parts Blast Furnace Slag (BFS) to one part Ordinary Portland Cement (OPC) is recommended as the preferred matrix for Phase 3 studies on CAGR graphite. (author)

Proceedings of the IRI task force activity 1995

International Nuclear Information System (INIS)

Radicella, S.M.

1996-05-01

The report contains the programme, conclusions and the write up of 11 presentations delivered during the International Reference Ionosphere (IRI) Task Force Activity 1995 that took place at the ICTP Trieste between 13-17 November 1995. The presentations included have been grouped in three chapters: Status report and data availability (2 presentations), Electron density profile shape below Nmax (5 presentations) and Intermediate regions (F1) electron density profile (4 presentations). Each presentation was indexed separately. Refs, figs, tabs

Electronic, magnetic and transport properties of graphene ribbons terminated by nanotubes

International Nuclear Information System (INIS)

Akhukov, M A; Yuan Shengjun; Fasolino, A; Katsnelson, M I

2012-01-01

We study, by density functional and large-scale tight-binding transport calculations, the electronic structure, magnetism and transport properties of the recently proposed graphene ribbons with edges rolled to form nanotubes. Edges with armchair nanotubes present magnetic moments localized either in the tube or the ribbon and of metallic or half-metallic character, depending on the symmetry of the junction. These properties have potential for spin valve and spin filter devices with advantages over other proposed systems. Edges with zigzag nanotubes are either metallic or semiconducting without affecting the intrinsic mobility of the ribbon. Varying the type and size of the nanotubes and ribbons offers the possibility to tailor the magnetic and transport properties, making these systems very promising for applications. (paper)

A MAGNETIC RIBBON MODEL FOR STAR-FORMING FILAMENTS

Energy Technology Data Exchange (ETDEWEB)

Auddy, Sayantan; Basu, Shantanu [Department of Physics and Astronomy, The University of Western Ontario, London, ON N6A 3K7 (Canada); Kudoh, Takahiro, E-mail: sauddy3@uwo.ca, E-mail: basu@uwo.ca, E-mail: kudoh@nagasaki-u.ac.jp [Faculty of Education, Nagasaki University, 1-14 Bunkyo-machi, Nagasaki 852-8521 (Japan)

2016-11-01

We develop a magnetic ribbon model for molecular cloud filaments. These result from turbulent compression in a molecular cloud in which the background magnetic field sets a preferred direction. We argue that this is a natural model for filaments and is based on the interplay between turbulence, strong magnetic fields, and gravitationally driven ambipolar diffusion, rather than pure gravity and thermal pressure. An analytic model for the formation of magnetic ribbons that is based on numerical simulations is used to derive a lateral width of a magnetic ribbon. This differs from the thickness along the magnetic field direction, which is essentially the Jeans scale. We use our model to calculate a synthetic observed relation between apparent width in projection versus observed column density. The relationship is relatively flat, similar to observations, and unlike the simple expectation based on a Jeans length argument.

Development of a magnetic measurement device for thin ribbon samples

International Nuclear Information System (INIS)

Sato, Yuta; Todaka, Takashi; Enokizono, Masato

2008-01-01

This paper presents a magnetic measurement device for thin ribbon samples, which are produced by rapid cooling technique. This device enables us to measure magnetic properties easily by only inserting a ribbon sample into a sample holder. The sample holder was made by bakelite to fix any width sample. A long solenoid coil was used to generate a uniform magnetic field and the sample holder was placed at the mid part of the solenoid. The magnetic field strength was measured using a shunt resistor and the magnetic flux density and magnetization in sample ribbons were evaluated by using search coils. The accuracy of measurement was verified with an amorphous metal ribbon sample. Next, we have measured magnetic properties of some magnetic shape memory alloys, which have different compositions. The measured results are compared and we clarified the effect of Sm contents on the magnetic properties

Overall evaluation of the modelling of the TRUE-1 tracer tests - Task 4. The Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes

International Nuclear Information System (INIS)

Marschall, Paul; Elert, Mark

2003-09-01

The Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes is a forum for the international organisations supporting the Aespoe HRL Project. The purpose of the Task Force is to interact in the area of conceptual and numerical modelling of groundwater flow and solute transport in fractured rock. Task 4 of the Aespoe Modelling Task Force consists of modelling exercises in support of the TRUE-1 tracer tests. The task was carried out in 1995-2000 and consisted of several modelling exercises in support of the TRUE-1 tracer tests, including predictive modelling where experimental results were not available beforehand. This report presents an overall evaluation of the achievements of Task 4. The specific objectives of the overall evaluation were to highlight innovative and successful modelling approaches developed, to assess the stages of the task which proved most beneficial for conceptual understanding of transport processes at the TRUE-1 site and to assess the success of various steering tools. A concise summary of scientific achievements is given and conclusions drawn with respect to unresolved technical issues. Recommendations are presented that can optimise the management of future modelling tasks

Report of the Task Force on Sawmill Wood Residue Management

International Nuclear Information System (INIS)

1993-11-01

The Sawmill Wood Residue Task Force was established in 1993 to seek solutions to managing wood residue at sawmills, shingle mills, and log sort yards in British Columbia without burning or landfilling. In particular, the Task Force was formed to address the phaseout of beehive-type wood waste burners by January 1, 1996. The Task Force was formed at the forest product industry's request and included representatives from industry associations and government. It reviewed existing information on the quantities of mill residues and the options available for reducing, reusing, and recycling the residues. Nearly half of all the province's residues of 5 million bone dry tonnes/y is disposed of by burning with no energy recovery, or by landfilling. It was recognized that the total volume of wood residue cannot be handled by any one method suitable for all sources but that in the near term, electricity generation could deal with a significant percentage of wood currently being burned. The most immediate technically viable opportnity by industry in this area may be in cogeneration of electricity for load displacement at pulp mills. Other opportunities exist such as conversion of wood residue to liquid fuels but these require greater commitments to research and development. The need to handle bark and sawdust was identified as a critical requirement for alternate uses. Small niche uses for wood residue must be examined on a case by case basis for each company or group of companies in a region. The provincial government can also promote better use of wood wastes through policies such as social costing of power generation options and sales tax exemption for ethanol fuel. 1 tab

Report of the Defense Science Board Task Force on Strategic Communication

National Research Council Canada - National Science Library

2008-01-01

The 2007 Defense Science Board (DSB) Task Force on Strategic Communication has written this report within the context of a larger study, the DSB 2007 Summer Study on Challenges to Military Operations in Support of National Interests...

Minutes and group memories from all NERBC/USGS-RPA power plant siting task force meetings through October, 1980. Appendix

International Nuclear Information System (INIS)

1980-11-01

The New England River Basins Commission/United States Geological Survey-Resource Planning Analysis Office (NERBC/USGS-RPA) Power Plant Siting Task Force has formerly met seven times between July 1979 and August 1980. At the first meeting on July 13, 1979, the members agreed that there were many problems with the current process of selecting sites for power plants in New England, and that they would work by consensus to find solutions for these problems. At the second meeting on October 19, 1979, NERBC staff presented information on the site selection and approval processes in New England. The Task Force began a preliminary discussion of problems in these processes, and agreed that the initial scope of work of the Task Force would focus on issues in site selection. At the third meeting on January 18, 1980, the Task Force began initial discussions in three areas: imperfections in the site selection process, stakeholders in the site selection process, and principles to guide solutions to the problems in site selection. On March 7, 1980, at the fourth meeting, the Task Force continued discussions on imperfections, stakeholders, and principles. At the fifth meeting on May 2, 1980, the Task Force reached a wide range of agreements on the difficulties encountered in the site selection process and on the principles guiding problem solving in site selection. At the sixth meeting on May 29, 1980, the Task Force focused on solutions to the problems identified at earlier meetings. Groups of Task Force members constructed eight different scenarios describing alternative power plant siting processes. In July 1980, the Task Force met for the seventh time and refined the eight scenarios, paring them down to five. An attempt was made to develop two scenarios using the common elements from the five. One of these two graphic models was based on government involvement in the site selection process, and the other was based on stakeholder involvement in the process

FLARE RIBBON ENERGETICS IN THE EARLY PHASE OF AN SDO FLARE

Energy Technology Data Exchange (ETDEWEB)

Fletcher, L.; Hannah, I. G.; Hudson, H. S. [School of Physics and Astronomy, SUPA, University of Glasgow, Glasgow, G12 8QQ (United Kingdom); Innes, D. E. [Max Planck Institute for Solar System Research, Max-Planck-Strasse 2, D-37191 Katlenburg-Lindau (Germany)

2013-07-10

The sites of chromospheric excitation during solar flares are marked by extended extreme ultraviolet ribbons and hard X-ray (HXR) footpoints. The standard interpretation is that these are the result of heating and bremsstrahlung emission from non-thermal electrons precipitating from the corona. We examine this picture using multi-wavelength observations of the early phase of an M-class flare SOL2010-08-07T18:24. We aim to determine the properties of the heated plasma in the flare ribbons, and to understand the partition of the power input into radiative and conductive losses. Using GOES, SDO/EVE, SDO/AIA, and RHESSI, we measure the temperature, emission measure (EM), and differential emission measure of the flare ribbons, and deduce approximate density values. The non-thermal EM, and the collisional thick target energy input to the ribbons are obtained from RHESSI using standard methods. We deduce the existence of a substantial amount of plasma at 10 MK in the flare ribbons, during the pre-impulsive and early-impulsive phase of the flare. The average column EM of this hot component is a few times 10{sup 28} cm{sup -5}, and we can calculate that its predicted conductive losses dominate its measured radiative losses. If the power input to the hot ribbon plasma is due to collisional energy deposition by an electron beam from the corona then a low-energy cutoff of {approx}5 keV is necessary to balance the conductive losses, implying a very large electron energy content. Independent of the standard collisional thick-target electron beam interpretation, the observed non-thermal X-rays can be provided if one electron in 10{sup 3}-10{sup 4} in the 10 MK (1 keV) ribbon plasma has an energy above 10 keV. We speculate that this could arise if a non-thermal tail is generated in the ribbon plasma which is being heated by other means, for example, by waves or turbulence.

Night Fighters Without Equal, Task Force 39 at Empress Augusta Bay

National Research Council Canada - National Science Library

Fuquea, David

2004-01-01

On the 1st of November 1943, the ships and men of Rear Admiral "Tip" Merrill's Task Force 39 steamed off the west coast of the island of Bougainville, the last island at the northern end of the Solomon Islands chain...

Dosimetry of wires and single ribbons of Iridium 192

International Nuclear Information System (INIS)

Mazzucco, L.D.

1998-01-01

The objective of this work is in order to present in table formats the dosimetry of wires and single ribbons of Iridium with lengths 1-12 cm for each one linear source along the bisector which is perpendicular at tissue sources (water) computed for linear activity 1 mCi/cm in the case of wires, and 1 mCi/seed for ribbons. The above tables are of direct use, adaptable at particular cases so they facilitate logarithmic graphics of doses in function of the distance for interpolation and use in the treatments planning. It was shown that for two sources with identical linear activity and total length, one of the equidistant seeds at 1 cm (ribbon) and one wire on the other hand, the differences in dose rates in near positions can be about the 15% so corroborating that it is not possible to use wire tables for seeds neither vice versa. Moreover it was elaborated tables of practical direct use for dose rate in water at c Gy/hr for wires and Ribbons 1-12 cm length and from 0.5-10 cm of distance in the perpendicular bisector at the Iridium implant. (Author)

In vacuum undulator task force report

Energy Technology Data Exchange (ETDEWEB)

Hastings, J.B.; Kao, C.C.; Stefan, P. [and others

1998-06-01

Historically the NSLS has been active in R&D for state-of-the-art electron beams, photon beams and x-ray optics. One of the available straight sections has therefore been dedicated to insertion device R&D. Over the past five to seven years a program aimed at exploiting the very small vertical {beta} function in the straight sections has yielded first a prototype small gap undulator (PSGU) and then an in-vacuum undulator (IVUN). The IVUN sources attain a brightness similar to the existing hybrid wigglers in X21 and X25. They radiate significantly lower total power than the wigglers but produce higher power densities. They provide undulator rather than wiggler spectra. Because of the small gaps and small periods there is not much tunability in these devices and they will have to be purpose-built for a specific scientific program. The original IVUN parameters were chosen for in-elastic x-ray scattering, similar to the scientific program on X21. This put the fundamental at 4.6 keV and the third harmonic at 13.8 keV. The question that this new possible insertion device poses is what science programs can best take advantage of this new insertion device source? To answer this, a task force was formed by M. Hart, NSLS Department Chair and charged with identifying viable scientific programs that could seek outside funding to construct IVUN beamlines. The task force concentrated on experimental programs that are presently being pursued on new insertion devices worldwide. For example, x-ray photon correlation spectroscopy, which takes advantage of the large coherent flux from undulator sources, was considered. However, this program was not considered as the highest priority. The general area of protein crystallography, however, is ideal for the IVUN source. The unique electron beam optics that makes the IVUN possible in the first place also makes the IVUN ideal as a source for microdiffraction.

77 FR 4561 - Meeting of the Community Preventive Services Task Force

Science.gov (United States)

2012-01-30

... Disease, Mental Health, and Alcohol. Meeting Accessibility: This meeting is open to the public, limited... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force AGENCY: Centers for Disease Control and Prevention (CDC...

Task Force on Energy Systems for Forward/Remote Operating Bases

Science.gov (United States)

2016-08-01

nuclear power energy systems ......................................................... 30 7.2.1 Radioisotope thermoelectric generators...issue, the Task Force found efforts to provide the most efficient methods for power production at the prime-contract level have been hampered by...management. Engineer Prime Power Operations21 describes theater level power infrastructure and inter-service responsibilities and, although dated from

National trachoma task forces: how can we work better?

OpenAIRE

Courtright P; Miri E

2010-01-01

Tackling trachoma is a complex challenge.In order to implement all four components of the SAFE strategy on a national level (surgery for trichiasis, antibiotics, facial cleanliness and environmental change, such as clean water and latrines), there needs to be national coordination, supported by political commitment at the highest level. In each trachoma-endemic country, the body responsible for making this work is the national trachoma task force (NTTF).

ESHRE Task Force on Ethics and Law 10: surrogacy.

Science.gov (United States)

Shenfield, F; Pennings, G; Cohen, J; Devroey, P; de Wert, G; Tarlatzis, B

2005-10-01

This 10th statement of the Task Force on Ethics and Law considers ethical questions specific to varied surrogacy arrangements. Surrogacy is especially complex as the interests of the intended parents, the surrogate, and the future child may differ. It is concluded that surrogacy is an acceptable method of assisted reproductive technology of the last resort for specific medical indications, for which only reimbursement of reasonable expenses is allowed.

Defense Science Board (DSB) Task Force on Cyber Deterrence

Science.gov (United States)

2017-02-01

Adversary-Specific Campaign Planning and Wargaming Findings: Because deterrence operates by affecting the calculations of specific decision -making...a strategic threat to U.S. critical infrastructure, or to be able to significantly affect the U.S. military’s ability to deploy and operate globally...bolster U.S. cyber deterrence and strengthen U.S. national security. The Task Force notes that the cyber threat to U.S. critical infrastructure is

The Oklahoma Attorney General's Task Force report on the State of End-of-Life Health Care, 2005.

Science.gov (United States)

Edmondson, W A Drew

2005-05-01

This article includes the recommendations submitted by the 15 members of the Oklahoma Attorney General's Task Force in their Report on the State of End-of-Life Health Care. The task force was created on April 21, 2004, and their report was accepted by Attorney General W.A. Drew Edmondson at a press conference April 11, 2005. It has been forwarded to members of the Oklahoma Legislature, relevant state agencies and organizations with an invitation to join with members of the task force to continue efforts to improve end-of-life care for Oklahomans. Copies of the report are available upon request to the Office of Attorney General.

Nanocrystallization in amorphous Fe40Ni40(Si+B)19Mo1-2 ribbons

International Nuclear Information System (INIS)

Saiseng, S.; Winotai, P.; Nilpairuch, S.; Limsuwan, P.; Tang, I.M.

2004-01-01

Cut Fe 40 Ni 40 (Si+B) 19 Mo 1-2 ribbons were annealed for 2 h at various temperatures between 350 deg. C and 600 deg. C. XRD and Mossbauer effect spectroscopy (ME) measurements were then performed on all of the ribbons. The magnetic properties of several ribbons were measured using a vibrating sample magnetometer (VSM). A differential thermal analysis scan (over the range 20-800 deg. C) of the as-cast ribbon showed two phase transitions; the first at 454 deg. C and the second at 525 deg. C. Both the XRD and ME spectra of the as cast, the 350 deg. C and 400 deg. C annealed ribbons showed that they were amorphous. The ME spectra of the 450 deg. C, 475 deg. C and 500 deg. C annealed ribbons showed that these ribbons contained α-Fe, α-Fe(Si) and t-Fe 2 B nanocrystallites. For the ribbons annealed above 550 deg. C, crystallites of t-Fe 2 B, t-Fe 3 B, t-Fe 5 SiB 2 and FCC-FeNi appeared, with the α-Fe and α-Fe(Si) crystallites disappearing. The sextets of all of the Fe compounds appeared in the ME spectra of the 525 deg. C annealed ribbon. The VSM measurements supported the picture of a two-stage phase transitions; amorphous phase→a nanocrystalline phase (Fe-containing nanocrystallites in an amorphous matrix) at 454 deg. C and then a second transition, the nanocrystalline phase→a disordered alloy containing Fe-B and Fe-Ni crystallites at 525 deg. C

Recommendations for a National High Blood Pressure Community Education Plan. Report of Task Force III--Community Education.

Science.gov (United States)

National Institutes of Health (DHEW), Bethesda, MD. High Blood Pressure Information Center.

Hypertensive disease being one of the most important medical problems now facing American medicine brought about the formation of the Federally sponsored National High Blood Pressure Education Program, which included four Task Forces. Task Force 3 reviews in this study information and experience useful for the development of guidelines for…

76 FR 63927 - Interagency Task Force on Antimicrobial Resistance (ITFAR): An Update on A Public Health Action...

Science.gov (United States)

2011-10-14

... Task Force on Antimicrobial Resistance (ITFAR): An Update on A Public Health Action Plan to Combat... outlined in A Public Health Action Plan to Combat Antimicrobial Resistance (Action Plan) and solicit... (AR) in recognition of the increasing importance of AR as a public health threat. The Task Force is co...

Status Report of the Inter-Laboratory Task Force on Remote Operation

Energy Technology Data Exchange (ETDEWEB)

Phinney, Nan

2001-12-13

The next generation of particle accelerators will be major projects which may require a new mode of international and inter-laboratory collaboration. They are likely to be too costly to be funded by a single nation and too large to be built by a single laboratory. The tremendous technical challenge of a new facility requires a critical mass of highly qualified and experienced physicists and engineers. These experts are presently distributed among the major accelerator centers around the world and it is believed important to maintain and develop this broad base of expertise. The successful accelerator technology development of recent decades depended on extensive exchange of people with complementary technical skills. Therefore, it is desirable and probably necessary that several accelerator laboratories will participate in any future project. A consequence of a multi-laboratory project is that the accelerator will be located a considerable distance from most of the contributing institutions which design, build and operate it. These considerations led the International Committee for Future Accelerators to initiate a study on the general and technical implications of such a collaboration. Two task forces were formed in February 2000 to conduct this study and they were asked to prepare a report on a time scale of one year. The task force on Remote Operation included members from most of the major accelerator laboratories around the world with expertise on accelerator operation, controls software, communication technologies, hardware design and maintenance. The task force members gathered information from the experts at their own institutions and from available experience in other fields, particularly astronomy.

Metallurgical characterization of melt-spun ribbons of U-5.4 wt%Nb alloy

Science.gov (United States)

Ma, Rong; Ren, Zhiyong; Tang, Qingfu; Chen, Dong; Liu, Tingyi; Su, Bin; Wang, Zhenhong; Luo, Chao

2018-06-01

The microstructures and micro-mechanical properties of the melt-spun ribbons of U-5.4 wt%Nb alloy were characterized using optical microscopy, scanning electron microscopy, X-ray diffraction and nanoindentation. Observed variations in microstructures and properties are related to the changes in ribbon thicknesses and cooling rates. The microstructures of the melt-spun ribbon consist of fine-scale columnar grains (∼1 μm) adjacent to the chill surface and coarse cellular grains in the remainder of the ribbon. In addition, the formation of inclusions in the ribbon is suppressed kinetically due to the high cooling rate during melt spinning. Compared with the water-quenched specimen prepared by traditional gravity casting and solution heat treatment, the elastic modulus values of the U-5.4 wt%Nb alloy were examined to vary with grain size and exhibited diverse energy dissipation capacities.

Comparison of impact forces, accelerations and ankle range of motion in surfing-related landing tasks.

Science.gov (United States)

Lundgren, Lina E; Tran, Tai T; Nimphius, Sophia; Raymond, Ellen; Secomb, Josh L; Farley, Oliver R L; Newton, Robert U; Sheppard, Jeremy M

2016-01-01

This study aimed to describe the impact forces, accelerations and ankle range of motion in five different landing tasks that are used in training and testing for competitive surfing athletes, to assist coaches in the prescription of landing task progression and monitoring training load. Eleven competitive surfing athletes aged 24 ± 7 years participated, and inertial motion sensors were fixed to the anterior aspect of the feet, mid-tibial shafts, sacrum and eighth thoracic vertebrae on these athletes. Three tasks were performed landing on force plates and two tasks in a modified gymnastics set-up used for land-based aerial training. Peak landing force, resultant peak acceleration and front and rear side ankle dorsiflexion ranges of motion during landing were determined. The peak acceleration was approximately 50% higher when performing aerial training using a mini-trampoline and landing on a soft-density foam board, compared to a similar landing off a 50 cm box. Furthermore, the ankle ranges of motion during the gymnastic type landings were significantly lower than the other landing types (P ≤ 0.05 and P ≤ 0.001), for front and rear sides, respectively. Conclusively, increased task complexity and specificity of the sport increased the tibial peak acceleration, indicating greater training load.

Development and Evaluation of Die Materials for Use in the Growth of Silicon Ribbons by the Inverted Ribbon Growth Process. Task 2: LSSA Project

Science.gov (United States)

Duffy, M. T.; Berkman, S.; Moss, H. I.; Cullen, G. W.

1978-01-01

Several ribbon growth experiments were performed from V-shaped dies coated with CVD Si3N4. The most significant result was the ability to perform five consecutive growth runs from the same die without mechanical degradation of the die through temperature cycling. The die was made from vitreous carbon coated with CVD Si3N4. Silicon oxynitride, Si2N2O, was examined with respect to thermal stability in contact with molten silicon. The results of X-ray analysis indicate that this material is converted to both alpha - and beta-Si3N4 in the presence of molten silicon. Experiments on the stability of CVD SiOxNy shoe that this material can be maintained in contact with molten silicon (sessile drop test) for greater than 30 h at 1450 C without total decompositon. These layers are converted mainly to beta-Si3N4.

The ribbon microphone: A teaching aid for low frequency electromagnetic education

CSIR Research Space (South Africa)

Van Wyk, Marius S

2017-09-01

Full Text Available The ribbon microphone lends itself as a good example to use for education of multi-physics computer modeling and simulation. The value of the ribbon microphone as teaching aid can be extended by adding a transformer and electronic amplifier...

Guidelines on routine cerebrospinal fluid analysis. Report from an EFNS task force

DEFF Research Database (Denmark)

Deisenhammer, F; Bartos, A; Egg, R

2006-01-01

total protein, albumin, immunoglobulins, glucose, lactate, cell count, cytological staining, and investigation of infectious CSF. The methods included a Systematic Medline search for the above-mentioned variables and review of appropriate publications by one or more of the task force members. Grading...... of the CSF/serum glucose ratio or increased lactate concentration indicates bacterial or fungal meningitis or leptomeningeal metastases. Intrathecal immunoglobulin G synthesis is best demonstrated by isoelectric focusing followed by specific staining. Cellular morphology (cytological staining) should...... of evidence and recommendations was based on consensus by all task force members. It is recommended that CSF should be analysed immediately after collection. If storage is needed 12 ml of CSF should be partitioned into three to four sterile tubes. Albumin CSF/serum ratio (Qalb) should be preferred to total...

Real-time changes in corticospinal excitability related to motor imagery of a force control task.

Science.gov (United States)

Tatemoto, Tsuyoshi; Tsuchiya, Junko; Numata, Atsuki; Osawa, Ryuji; Yamaguchi, Tomofumi; Tanabe, Shigeo; Kondo, Kunitsugu; Otaka, Yohei; Sugawara, Kenichi

2017-09-29

To investigate real-time excitability changes in corticospinal pathways related to motor imagery in a changing force control task, using transcranial magnetic stimulation (TMS). Ten healthy volunteers learnt to control the contractile force of isometric right wrist dorsiflexion in order to track an on-screen sine wave form. Participants performed the trained task 40 times with actual muscle contraction in order to construct the motor image. They were then instructed to execute the task without actual muscle contraction, but by imagining contraction of the right wrist in dorsiflexion. Motor evoked potentials (MEPs), induced by TMS in the right extensor carpi radialis muscle (ECR) and flexor carpi radialis muscle (FCR), were measured during motor imagery. MEPs were induced at five time points: prior to imagery, during the gradual generation of the imaged wrist dorsiflexion (Increasing phase), the peak value of the sine wave, during the gradual reduction (Decreasing phase), and after completion of the task. The MEP ratio, as the ratio of imaged MEPs to resting-state, was compared between pre- and post-training at each time point. In the ECR muscle, the MEP ratio significantly increased during the Increasing phase and at the peak force of dorsiflexion imagery after training. Moreover, the MEP ratio was significantly greater in the Increasing phase than in the Decreasing phase. In the FCR, there were no significant consistent changes. Corticospinal excitability during motor imagery in an isometric contraction task was modulated in relation to the phase of force control after image construction. Copyright © 2017 Elsevier B.V. All rights reserved.

National trachoma task forces: how can we work better?

Directory of Open Access Journals (Sweden)

Courtright P

2010-09-01

Full Text Available Tackling trachoma is a complex challenge.In order to implement all four components of the SAFE strategy on a national level (surgery for trichiasis, antibiotics, facial cleanliness and environmental change, such as clean water and latrines, there needs to be national coordination, supported by political commitment at the highest level. In each trachoma-endemic country, the body responsible for making this work is the national trachoma task force (NTTF.

Domain walls dynamics in the amorphous ribbon with a helical magnetic anisotropy

International Nuclear Information System (INIS)

Zhmetko, D.N.; Savin, V.V.; Lemish, P.V.; Troschenkov, Y.N.

2006-01-01

The damping mechanism for motion of domain walls, which form the sandwich structure and move from the middle plane of the ribbon to opposite surfaces during the dynamic magnetization reversal, have been investigated. The difference between the real and ideal sandwich domain structure, the actual distribution of the anisotropy easy directions through the ribbon thickness and the M-bar s deviation from local easy directions under the action of applied magnetic field have been taken into account. It was revealed that the maximum of the total damping coefficient β tot (x) near the half-way of the domain wall run is due to the influence of the magnetic stray fields. These fields have a character of irregular oscillations and are directed approximately perpendicular to the local easy direction of the ribbon layer through which the domain wall propagates. The damping coefficient β e.c. (x) determined by eddy-currents has the maximal value close to the ribbon middle and decreases linearly to zero when the domain wall approaches the ribbon surface

Task Force Report, Safety of Personnel in LHC underground areas following the accident of 19th September 2008

CERN Document Server

Delille, B; Inigo-Golfin, J; Lindell, G; Roy, G; Tavian, L; Thomas, E; Trant, R; Völlinger, C

2009-01-01

In January 2009, the Task Force on Safety of Personnel in the LHC underground areas following the accident in sector 3-4 of 19th September 2008 (Safety Task Force) received from the CERN Director General the mandate to investigate the impact of the accident of 19th September 2008 on the safety of personnel working in the LHC underground areas. This mandate includes the elaboration of preventive and/or corrective measures, if deemed necessary. This report gives the conclusions and recommendations of the Safety Task Force which have been reviewed by an external advisory committee of safety experts.

OBSERVATIONS OF AN X-SHAPED RIBBON FLARE IN THE SUN AND ITS THREE-DIMENSIONAL MAGNETIC RECONNECTION

Energy Technology Data Exchange (ETDEWEB)

Li, Y.; Ding, M. D.; Yang, K. [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Qiu, J.; Longcope, D. W., E-mail: yingli@nju.edu.cn [Department of Physics, Montana State University, Bozeman, MT 59717 (United States)

2016-05-20

We report evolution of an atypical X-shaped flare ribbon that provides novel observational evidence of three-dimensional (3D) magnetic reconnection at a separator. The flare occurred on 2014 November 9. High-resolution slit-jaw 1330 Å images from the Interface Region Imaging Spectrograph reveal four chromospheric flare ribbons that converge and form an X-shape. Flare brightening in the upper chromosphere spreads along the ribbons toward the center of the “X” (the X-point), and then spreads outward in a direction more perpendicular to the ribbons. These four ribbons are located in a quadrupolar magnetic field. Reconstruction of magnetic topology in the active region suggests the presence of a separator connecting to the X-point outlined by the ribbons. The inward motion of flare ribbons in the early stage therefore indicates 3D magnetic reconnection between two sets of non-coplanar loops that approach laterally, and reconnection proceeds downward along a section of vertical current sheet. Coronal loops are also observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory confirming the reconnection morphology illustrated by ribbon evolution.

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

Energy Technology Data Exchange (ETDEWEB)

Bragg-Sitton, Shannon Michelle [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and system codes applicable to ATF evaluation. The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. This

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

International Nuclear Information System (INIS)

Bragg-Sitton, Shannon Michelle

2016-01-01

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and system codes applicable to ATF evaluation. The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. This

Mena-GRASP65 interaction couples actin polymerization to Golgi ribbon linking.

Science.gov (United States)

Tang, Danming; Zhang, Xiaoyan; Huang, Shijiao; Yuan, Hebao; Li, Jie; Wang, Yanzhuang

2016-01-01

In mammalian cells, the Golgi reassembly stacking protein 65 (GRASP65) has been implicated in both Golgi stacking and ribbon linking by forming trans-oligomers through the N-terminal GRASP domain. Because the GRASP domain is globular and relatively small, but the gaps between stacks are large and heterogeneous, it remains puzzling how GRASP65 physically links Golgi stacks into a ribbon. To explore the possibility that other proteins may help GRASP65 in ribbon linking, we used biochemical methods and identified the actin elongation factor Mena as a novel GRASP65-binding protein. Mena is recruited onto the Golgi membranes through interaction with GRASP65. Depleting Mena or disrupting actin polymerization resulted in Golgi fragmentation. In cells, Mena and actin were required for Golgi ribbon formation after nocodazole washout; in vitro, Mena and microfilaments enhanced GRASP65 oligomerization and Golgi membrane fusion. Thus Mena interacts with GRASP65 to promote local actin polymerization, which facilitates Golgi ribbon linking. © 2016 Tang et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Dynamics of sandwich domain structure in Co-based amorphous ribbons with helical magnetic anisotropy: Part I

International Nuclear Information System (INIS)

Zhmetko, D.N.; Zhmetko, S.D.

2009-01-01

The distribution of axes of easy magnetization close to a homogeneous distribution is revealed in each half-thickness of a ribbon after annealing it in a helical magnetic field. The transition from magnetic reversal of a ribbon by the displacement of two domain walls formed near a middle plane of a ribbon to magnetic reversal of a ribbon by displacement of two domain walls formed near to the main surfaces of a ribbon is found out during each half-period of a magnetic reversal.

Temperature distribution study in flash-annealed amorphous ribbons

International Nuclear Information System (INIS)

Moron, C.; Garcia, A.; Carracedo, M.T.

2003-01-01

Negative magnetrostrictive amorphous ribbons have been locally current annealed with currents from 1 to 8 A and annealing times from 14 ms to 200 s. In order to obtain information about the sample temperature during flash or current annealing, a study of the temperature dispersion during annealing in amorphous ribbons was made. The local temperature variation was obtained by measuring the local intensity of the infrared emission of the sample with a CCD liquid nitrogen cooled camera. A distribution of local temperature has been found in spite of the small dimension of the sample

Hybrid Force and Position Control Strategy of Robonaut Performing Object Transfer Task

Directory of Open Access Journals (Sweden)

Chen Gang

2018-01-01

Full Text Available This paper proposes a coordinated hybrid force/position control strategy of robonaut performing object transfer operation. Firstly, the constraint relationships between robonaut and object are presented. Base on them, the unified dynamic model of the robonaut and object is established to design the hybrid force/position control method. The movement, the internal force and the external constraint force of the object are considered as the control targets of the control system. Finally, a MATLAB simulation of the robonaut performing object transfer task verifies the correctness and effectiveness of the proposed method. The results show that all the targets can be control accurately by using the method proposed in this paper. The presented control method can control both internal and external forces while maintaining control accuracy, which is a common control strategy.

Magnetic response of FeNbCuBSi RQ ribbons to bi-axial strain

Energy Technology Data Exchange (ETDEWEB)

Butvin, P. E-mail: fyzipbut@nic.savba.sk; Butvinova, B.; Frait, Z.; Sitek, J.; Svec, P

2000-06-02

Nanocrystalline strip samples of the FeNbCuBSi class that are macroscopically heterogeneous due to surface /volume differences have been investigated. This heterogeneity is found to be a general property of the class. It represents a base for mutual force influence between the surface and the majority volume beneath. The bi-axial in-plane stress exerted by the ribbon surfaces on the volume is demonstrated first of all by a magnetoelastic anisotropy. The contribution of the creep-induced anisotropy, which can build up under the surface stress at post-treatment temperature, is also found possible.

Magnetic response of FeNbCuBSi RQ ribbons to bi-axial strain

International Nuclear Information System (INIS)

Butvin, P.; Butvinova, B.; Frait, Z.; Sitek, J.; Svec, P.

2000-01-01

Nanocrystalline strip samples of the FeNbCuBSi class that are macroscopically heterogeneous due to surface /volume differences have been investigated. This heterogeneity is found to be a general property of the class. It represents a base for mutual force influence between the surface and the majority volume beneath. The bi-axial in-plane stress exerted by the ribbon surfaces on the volume is demonstrated first of all by a magnetoelastic anisotropy. The contribution of the creep-induced anisotropy, which can build up under the surface stress at post-treatment temperature, is also found possible

Transport Task Force workshop: basic experiments highlights

Energy Technology Data Exchange (ETDEWEB)

Linford, R.K. (Los Alamos National Lab., NM (USA)); Luckhardt, S. (Massachusetts Inst. of Tech., Cambridge, MA (USA)); Lyon, J.F. (Oak Ridge National Lab., TN (USA)); Navratil, G.A. (Columbia Univ., New York, NY (USA)); Schoenberg, K.F. (Los Alamos National Lab., NM (USA))

1990-01-01

Selected topics are summarized from the Basic Experiments session of the Transport Task Force Workshop held August 21-24, 1989, in San Diego, California. This session included presentations on paradigm experiments, stellarators, reversed-field pinches, and advanced tokamaks. Recent advances in all of these areas illustrate the importance of these experiments in advancing our understanding of toroidal transport. Progress has been made in measuring the details of particle diffusion, isolating specific modes, measuring fluctuation variations with field geometry and beta, and comparing all these with theoretical predictions. The development of experimental tools for determining which fluctuations dominate transport are also reported. Continued significant advances are anticipated in a number of areas highlighted. (author).

Transport Task Force workshop: basic experiments highlights

International Nuclear Information System (INIS)

Linford, R.K.; Luckhardt, S.; Lyon, J.F.; Navratil, G.A.; Schoenberg, K.F.

1990-01-01

Selected topics are summarized from the Basic Experiments session of the Transport Task Force Workshop held August 21-24, 1989, in San Diego, California. This session included presentations on paradigm experiments, stellarators, reversed-field pinches, and advanced tokamaks. Recent advances in all of these areas illustrate the importance of these experiments in advancing our understanding of toroidal transport. Progress has been made in measuring the details of particle diffusion, isolating specific modes, measuring fluctuation variations with field geometry and beta, and comparing all these with theoretical predictions. The development of experimental tools for determining which fluctuations dominate transport are also reported. Continued significant advances are anticipated in a number of areas highlighted. (author)

Report of Task Force for review of nuclear waste management. Draft

International Nuclear Information System (INIS)

1978-02-01

Some of the findings of the Task Force are: a majority of independent technical experts have concluded that high-level waste can be safely disposed in geological media, but validation of the specific technical choices will be an important element of the licensing process. Reprocessing is not required for the safe disposal of commercial spent fuel. Consideration should be given to an early demonstration of the geologic disposal of a limited number of spent fuel assemblies in the waste Isolation Pilot Plant. The Spent Fuel Policy announced by President Carter in October 1977 must be integrated with the Waste Management Policy. The Task Force report highlights the importance of away from reactor storage that occurs between on-site storage of spent fuel at utilities and ultimate disposal. The target for initial operation in 1985 os a National Waste Repository for the permanent disposal of commercial high-level waste as spent fuel may not be met; this does not affect the early 1980s schedule for the Waste Isolation Pilot Plant. The responsibility for the ultimate disposal for all forms of nuclear waste should be with the Federal Government and long-term waste disposal facilities should be subject to NRC licensing. The NEPA process is an essential part of the nuclear waste management program and Department of Energy efforts in this regard must be strengthened. Policy and program management responsibility for Waste Management should be raised to a higher level in the Department of Energy. There are substantial budgetary impacts of the Task Force recommendations and legislation would be required to carry out many of the suggested changes

Answers to questions posed by the Michigan Governor's Nuclear Waste Disposal Task Force

Energy Technology Data Exchange (ETDEWEB)

1976-09-30

A general presentation of the National Waste Terminal Storage (NWTS) Program was given on July 26, 1976, to the Michigan Environmental Review Board and the Michigan Governor's Nuclear Waste Disposal Task Force. Following the presentation, Dr. William G. Taylor, Chairman of the Task Force, provided ERDA with a listing of questions which pertained to the NWTS program and ERDA/OWI's interest in northeast Michigan. This document contains copies of the information which was provided to Dr. Taylor in response to his inquiry.

Screening for gestational diabetes mellitus : US preventive services task force recommendation statement

NARCIS (Netherlands)

Calonge, Ned; Petitti, Diana B.; DeWitt, Thomas G.; Gordis, Leon; Gregory, Kimberly D.; Harris, Russell; Isham, George; LeFevre, Michael L.; Loveland-Cherry, Carol; Marion, Lucy N.; Moyer, Virginia A.; Ockene, Judith K.; Sawaya, George F.; Siu, Albert L.; Teutsch, Steven M.; Yawn, Barbara P.

2008-01-01

Description: Update of 2003 U. S. Preventive Services Task Force (USPSTF) recommendation about screening for gestational diabetes. Methods: The USPSTF weighed the evidence on maternal and neonatal benefits (reduction in preeclampsia, mortality, brachial plexus injury, clavicular fractures, admission

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

Energy Technology Data Exchange (ETDEWEB)

Bragg-Sitton, Shannon Michelle [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, parametric studies, and selection of system codes. The Cladding and Core Materials and Fuel Concepts task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment Task Force is chaired by Shannon Bragg-Sitton (INL), while the Cladding Task Force will be chaired by a representative from France (Marie Moatti, Electricite de France [EdF]) and the Fuels Task Force will be chaired by a representative from Japan (Masaki Kurata, Japan Atomic Energy Agency [JAEA]). This report provides an overview of the Systems Assessment Task Force charter and status of work accomplishment.

Psychophysical testing of visual prosthetic devices: a call to establish a multi-national joint task force

Science.gov (United States)

Rizzo, Joseph F., III; Ayton, Lauren N.

2014-04-01

Recent advances in the field of visual prostheses, as showcased in this special feature of Journal of Neural Engineering , have led to promising results from clinical trials of a number of devices. However, as noted by these groups there are many challenges involved in assessing vision of people with profound vision loss. As such, it is important that there is consistency in the methodology and reporting standards for clinical trials of visual prostheses and, indeed, the broader vision restoration research field. Two visual prosthesis research groups, the Boston Retinal Implant Project (BRIP) and Bionic Vision Australia (BVA), have agreed to work cooperatively to establish a multi-national Joint Task Force. The aim of this Task Force will be to develop a consensus statement to guide the methods used to conduct and report psychophysical and clinical results of humans who receive visual prosthetic devices. The overarching goal is to ensure maximum benefit to the implant recipients, not only in the outcomes of the visual prosthesis itself, but also in enabling them to obtain accurate information about this research with ease. The aspiration to develop a Joint Task Force was first promulgated at the inaugural 'The Eye and the Chip' meeting in September 2000. This meeting was established to promote the development of the visual prosthetic field by applying the principles of inclusiveness, openness, and collegiality among the growing body of researchers in this field. These same principles underlie the intent of this Joint Task Force to enhance the quality of psychophysical research within our community. Despite prior efforts, a critical mass of interested parties could not congeal. Renewed interest for developing joint guidelines has developed recently because of a growing awareness of the challenges of obtaining reliable measurements of visual function in patients who are severely visually impaired (in whom testing is inherently noisy), and of the importance of

Pharmacy faculty workplace issues: findings from the 2009-2010 COD-COF Joint Task Force on Faculty Workforce.

Science.gov (United States)

Desselle, Shane P; Peirce, Gretchen L; Crabtree, Brian L; Acosta, Daniel; Early, Johnnie L; Kishi, Donald T; Nobles-Knight, Dolores; Webster, Andrew A

2011-05-10

Many factors contribute to the vitality of an individual faculty member, a department, and an entire academic organization. Some of the relationships among these factors are well understood, but many questions remain unanswered. The Joint Task Force on Faculty Workforce examined the literature on faculty workforce issues, including the work of previous task forces charged by the American Association of Colleges of Pharmacy (AACP). We identified and focused on 4 unique but interrelated concepts: organizational culture/climate, role of the department chair, faculty recruitment and retention, and mentoring. Among all 4 resides the need to consider issues of intergenerational, intercultural, and gender dynamics. This paper reports the findings of the task force and proffers specific recommendations to AACP and to colleges and schools of pharmacy.

Application Potential of Nanocrystalline Ribbons Still Pending

Science.gov (United States)

Butvin, Pavol; Butvinová, Beata; Švec, Peter; Sitek, Jozef

2010-09-01

Nanocrystalline soft-magnetic ribbons promised a wide-spread practical use when introduced at the beginning of nineties. After 20 years of extensive research there are still unclear material problems which are thought to be the principal reason why these materials show but marginal use. Poorly controllable magnetic anisotropy due to spontaneous intrinsic macroscopic stress that comes from an inevitable heterogeneity of the ribbon materials is pointed to in this work. Certain stress-based mechanisms are shown to induce the unintended anisotropy in the already familiar Finemets as well as in the newer Hitperms. Hysteresis loops, domain structure and power loss is used to reveal the anisotropy consequences and particular connected but still unanswered questions are pinpointed.

Magnetic properties of nanocrystallized Fe-Pt-B melt-spun ribbons

International Nuclear Information System (INIS)

Yamamoto, Tokujiro; Omori, Akihiro; Kimura, Hisamichi; Inoue, Akihisa

2007-01-01

L1 0 FePt nanoparticles have been prepared by etching grain boundaries of heat-treated melt-spun Fe-19Pt-25B (at.%) alloy ribbons. It is revealed that an L1 0 FePt nanocrystalline phase is directly formed from the Fe-Pt-B amorphous ribbons by long-time heat treatment at low temperatures in the vicinity of 723 K. With increasing heat treatment time, dimensions of the nanocrystallized FePt grains increase, accompanied by a change from soft ferromagnetic to hard ferromagnetic. The ribbon crystallized at 723 K for 1.8 ks consists of only an FePt L1 0 phase and its coercivity is as low as 0.381 kA/m. However, it increases to 372 kA/m with increasing grain size of precipitated L1 0 phase to about 30 nm by heat treatment for 86.4 ks, while the saturation magnetic flux density remains constant at about 0.4 T. Etching boundaries in heat-treated ribbons has been performed to obtain ferromagnetic L1 0 FePt nanoparticles and several particles were observed by means of transmission electron microscopy

Mechanical properties of metallic ribbons investigated by depth sensing indentation technique

International Nuclear Information System (INIS)

Pesek, Ladislav; Dobrzanski, Leszek A.; Zubko, Pavol; Konieczny, Jaroslaw

2006-01-01

The paper presents mechanical properties of two kinds of Co-based and one Fe-based metallic ribbons by the depth sensing indentation (DSI) technique. Investigations were carried out on two kinds ternary alloy Co 77 Si 11,5 B 11,5 and Fe 78 Si 13 B 9 and multicomponent Co 68 Fe 4 Mo 1 Si 13,5 B 13,5 , which are so-called 'zero-magnetostriction' materials. Metallic ribbons were investigated in amorphous state and partially crystallized state after annealing in 400deg. C in argon atmosphere. Heating of ribbons obtained by melt spinning technique was performed to check its effect on changes of mechanical properties

Altered visual strategies and attention are related to increased force fluctuations during a pinch grip task in older adults.

Science.gov (United States)

Keenan, Kevin G; Huddleston, Wendy E; Ernest, Bradley E

2017-11-01

The purpose of the study was to determine the visual strategies used by older adults during a pinch grip task and to assess the relations between visual strategy, deficits in attention, and increased force fluctuations in older adults. Eye movements of 23 older adults (>65 yr) were monitored during a low-force pinch grip task while subjects viewed three common visual feedback displays. Performance on the Grooved Pegboard test and an attention task (which required no concurrent hand movements) was also measured. Visual strategies varied across subjects and depended on the type of visual feedback provided to the subjects. First, while viewing a high-gain compensatory feedback display (horizontal bar moving up and down with force), 9 of 23 older subjects adopted a strategy of performing saccades during the task, which resulted in 2.5 times greater force fluctuations in those that exhibited saccades compared with those who maintained fixation near the target line. Second, during pursuit feedback displays (force trace moving left to right across screen and up and down with force), all subjects exhibited multiple saccades, and increased force fluctuations were associated ( r s = 0.6; P = 0.002) with fewer saccades during the pursuit task. Also, decreased low-frequency (attention z scores. Comparison of these results with our previously published results in young subjects indicates that saccadic eye movements and attention are related to force control in older adults. NEW & NOTEWORTHY The significant contributions of the study are the addition of eye movement data and an attention task to explain differences in hand motor control across different visual displays in older adults. Older participants used different visual strategies across varying feedback displays, and saccadic eye movements were related with motor performance. In addition, those older individuals with deficits in attention had impaired motor performance on two different hand motor control tasks, including

Space station operations task force. Panel 4 report: Management integration

Science.gov (United States)

1987-01-01

The Management Integration Panel of the Space Station Operations Task Force was chartered to provide a structure and ground rules for integrating the efforts of the other three panels and to address a number of cross cutting issues that affect all areas of space station operations. Issues addressed include operations concept implementation, alternatives development and integration process, strategic policy issues and options, and program management emphasis areas.

Oxygen measurements in thin ribbon silicon

Energy Technology Data Exchange (ETDEWEB)

Hyland, S L; Ast, D G; Baghdadi, A

1987-03-01

The oxygen content of thin silicon ribbons grown by the dendritic web technique was measured using a modification of the ASTM method based on Fourier transform infrared spectroscopy. Web silicon was found to have a high oxygen content, ranging from 13 to 19 ppma, calculated from the absorption peak associated with interstitial oxygen and using the new ASTM conversion coefficient. The oxygen concentration changed by about 10% along the growth direction of the ribbon. In some samples, a shoulder was detected on the absorption peak. A similar shoulder in Czochralski grown material has been variously interpreted in the literature as due to a complex of silicon, oxygen, and vacancies, or to a phase of SiO/sub 2/ developed along dislocations in the material. In the case of web silicon, it is not clear which is the correct interpretation.

Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale

Directory of Open Access Journals (Sweden)

Y. F. Liang

2015-01-01

Full Text Available Melt spinning method has been widely applied for fabrication of Fe-based amorphous/nanocrystalline ribbons in industry. Compared with Fe-based amorphous/nanocrystalline alloys, Fe-6.5wt%Si high silicon steel is of low cost and has comparable excellent soft magnetic properties. Due to higher melting point and absence of supercooled liquid region, fabrication of Fe-6.5wt%Si ribbons is very hard and is only on lab scale. In this paper, we report that large scale fabrication of Fe-6.5wt%Si ribbons was successful and microstructures, ordered structures, and mechanical and soft magnetic properties of the ribbons were investigated. Due to rapid solidification rate, the ribbons were of ultrafine grains, and low degree of order and exhibited some extent of bending and tensile ductility. After heat treatment, excellent soft magnetic properties were obtained. Due to near-zero magnetostriction, the ribbons are promising to be used in electric devices with high frequencies where low noises are required.

75 FR 43943 - Defense Science Board; Task Force on Counter Insurgency (COIN) Intelligence, Surveillance and...

Science.gov (United States)

2010-07-27

... and what emerging science and technology would have the greatest intelligence potential in this type... DEPARTMENT OF DEFENSE Office of the Secretary Defense Science Board; Task Force on Counter... Defense (DoD). ACTION: Notice of advisory committee meetings. SUMMARY: The Defense Science Board Task...

The International Society for Bipolar Disorders (ISBD) Task Force Report on Antidepressant Use in Bipolar Disorders

Science.gov (United States)

Pacchiarotti, Isabella; Bond, David J.; Baldessarini, Ross J.; Nolen, Willem A.; Grunze, Heinz; Licht, Rasmus W.; Post, Robert M.; Berk, Michael; Goodwin, Guy M.; Sachs, Gary S.; Tondo, Leonardo; Findling, Robert L.; Youngstrom, Eric A.; Tohen, Mauricio; Undurraga, Juan; González-Pinto, Ana; Goldberg, Joseph F.; Yildiz, Ayşegül; Altshuler, Lori L.; Calabrese, Joseph R.; Mitchell, Philip B.; Thase, Michael E.; Koukopoulos, Athanasios; Colom, Francesc; Frye, Mark A.; Malhi, Gin S.; Fountoulakis, Konstantinos N.; Vázquez, Gustavo; Perlis, Roy H.; Ketter, Terence A.; Cassidy, Frederick; Akiskal, Hagop; Azorin, Jean-Michel; Valentí, Marc; Mazzei, Diego Hidalgo; Lafer, Beny; Kato, Tadafumi; Mazzarini, Lorenzo; Martínez-Aran, Anabel; Parker, Gordon; Souery, Daniel; Özerdem, Ayşegül; McElroy, Susan L.; Girardi, Paolo; Bauer, Michael; Yatham, Lakshmi N.; Zarate, Carlos A.; Nierenberg, Andrew A.; Birmaher, Boris; Kanba, Shigenobu; El-Mallakh, Rif S.; Serretti, Alessandro; Rihmer, Zoltan; Young, Allan H.; Kotzalidis, Georgios D.; MacQueen, Glenda M.; Bowden, Charles L.; Ghaemi, S. Nassir; Lopez-Jaramillo, Carlos; Rybakowski, Janusz; Ha, Kyooseob; Perugi, Giulio; Kasper, Siegfried; Amsterdam, Jay D.; Hirschfeld, Robert M.; Kapczinski, Flávio; Vieta, Eduard

2014-01-01

Objective The risk-benefit profile of antidepressant medications in bipolar disorder is controversial. When conclusive evidence is lacking, expert consensus can guide treatment decisions. The International Society for Bipolar Disorders (ISBD) convened a task force to seek consensus recommendations on the use of antidepressants in bipolar disorders. Method An expert task force iteratively developed consensus through serial consensus-based revisions using the Delphi method. Initial survey items were based on systematic review of the literature. Subsequent surveys included new or reworded items and items that needed to be rerated. This process resulted in the final ISBD Task Force clinical recommendations on antidepressant use in bipolar disorder. Results There is striking incongruity between the wide use of and the weak evidence base for the efficacy and safety of antidepressant drugs in bipolar disorder. Few well-designed, long-term trials of prophylactic benefits have been conducted, and there is insufficient evidence for treatment benefits with antidepressants combined with mood stabilizers. A major concern is the risk for mood switch to hypomania, mania, and mixed states. Integrating the evidence and the experience of the task force members, a consensus was reached on 12 statements on the use of antidepressants in bipolar disorder. Conclusions Because of limited data, the task force could not make broad statements endorsing antidepressant use but acknowledged that individual bipolar patients may benefit from antidepressants. Regarding safety, serotonin reuptake inhibitors and bupropion may have lower rates of manic switch than tricyclic and tetracyclic antidepressants and norepinephrine-serotonin reuptake inhibitors. The frequency and severity of antidepressant-associated mood elevations appear to be greater in bipolar I than bipolar II disorder. Hence, in bipolar I patients antidepressants should be prescribed only as an adjunct to mood-stabilizing medications

Broadband magnetic losses of nanocrystalline ribbons and powder cores

Energy Technology Data Exchange (ETDEWEB)

Beatrice, Cinzia, E-mail: c.beatrice@inrim.it [Istituto Nazionale di Ricerca Metrologica, Nanoscience and Materials Division, Torino (Italy); Dobák, Samuel [Institute of Physics, Faculty of Science, P.J. Šafárik University, Košice (Slovakia); Ferrara, Enzo; Fiorillo, Fausto [Istituto Nazionale di Ricerca Metrologica, Nanoscience and Materials Division, Torino (Italy); Ragusa, Carlo [Politecnico di Torino, Energy Department, Torino (Italy); Füzer, Ján; Kollár, Peter [Institute of Physics, Faculty of Science, P.J. Šafárik University, Košice (Slovakia)

2016-12-15

Finemet type alloys have been investigated from DC to 1 GHz at different induction levels upon different treatments: as amorphous precursors, as ribbons nanocrystallized with and without an applied saturating field, as consolidated powders. The lowest energy losses at all frequencies and maximum Snoek's product are exhibited by the transversally field-annealed ribbons. This is understood in terms of rotation-dominated magnetization process in the low-anisotropy material. Intergrain eddy currents are responsible for the fast increase of the losses with frequency and for early permeability relaxation of the powder cores. Evidence for resonant phenomena at high frequencies and for the ensuing inadequate role of the static magnetic constitutive equation of the material in solving the magnetization dynamics via the Maxwell's diffusion equation of the electromagnetic field is provided. It is demonstrated that, by taking the Landau–Lifshitz–Gilbert equation as a constitutive relation, the excellent frequency response of the transverse anisotropy ribbons can be described by analytical method.

First order reversal curve analysis on NdFeB nanocomposite ribbons subjected to Joule heating treatments

Energy Technology Data Exchange (ETDEWEB)

Pampillo, L.G. [INTECIN-Instituto de Tecnologias y ciencias de la Ingenieria ' Hilario Fernandez Long' (UBA-CONICET), Facultad de Ingenieria, Paseo Colon 850 (C1063ACV), C. A. B. A. (Argentina); Saccone, F.D., E-mail: fsaccone@fi.uba.ar [INTECIN-Instituto de Tecnologias y ciencias de la Ingenieria ' Hilario Fernandez Long' (UBA-CONICET), Facultad de Ingenieria, Paseo Colon 850 (C1063ACV), C. A. B. A. (Argentina); Knobel, M. [Instituto de Fisica Gleb Wataghin-Departamento de Fisica de Materia Condensada-Universidade Estadual de Campinas, Cidade Universitaria Zeferino Vaz, Barao Geraldo 13083-970, Campinas, Sao Paulo (Brazil); Sirkin, H.R.M. [INTECIN-Instituto de Tecnologias y ciencias de la Ingenieria ' Hilario Fernandez Long' (UBA-CONICET), Facultad de Ingenieria, Paseo Colon 850 (C1063ACV), C. A. B. A. (Argentina)

2012-09-25

Highlights: Black-Right-Pointing-Pointer Nd-lean amorphous precursors subjected to Joule heating. Black-Right-Pointing-Pointer Exchange-spring magnets. Black-Right-Pointing-Pointer FORC diagrams of irreversible switching fields. Black-Right-Pointing-Pointer This last techniques helped us to verify the optimized treatments conditions. - Abstract: Amorphous precursors with composition Nd{sub 4.5}Fe{sub 72-x}Co{sub 3+x}Cr{sub 2}Al{sub 1}B{sub 17.5} (x = 0, 2, 7, 12) were thermally treated by the Joule heating technique with a linearly varying electrical current. The crystallization kinetics was followed by monitoring the resistance of the ribbons during the heating up to the final applied current. Crystallized nanostructured phases coexist with an amorphous matrix, as it was observed by means of Moessbauer Spectroscopy and X-ray diffraction. The irreversible magnetic response of the Joule heated ribbons was analyzed by the First Order Reversal Curves (FORC) diagram technique. For the optimal treatments, associated with the higher maximum energy products for each sample composition, it was found that the main interaction is of a strongly dipolar characteristic. Over annealed samples show a FORC diagram that gives into account of softening, due to grain growth, for those phases precipitated at the first crystallization stage. When it is measured at 20 K, the hardest magnetic sample (Fe = 72 at.%, Co = 3 at.%, I{sub final} = 0.5 A), exhibits a diagram with characteristics corresponding to dipolar interactions of soft phases. This fact is consistent with an enhancement of the exchange length due to the increase in the soft phase stiffness as it is expected at low temperatures.

Funds for the Future. Report of the Twentieth Century Fund Task Force on College and University Endowment Policy.

Science.gov (United States)

Williamson, J. Peter

The Task Force on College and University Endowment Policy examines endowment policy in a broad context. They feel that it is important to preserve private colleges and universities and develop a sense of mission about how best to pursue this objective. The Task Force reviews policy issues faced by managers of endowment funds for institutions of…

75 FR 62309 - Establishing a Task Force on Skills for America's Future

Science.gov (United States)

2010-10-08

... reward excellent outcomes and true innovation that meets the needs of entrepreneurs and other employers... task force to develop skills for America's future by identifying, developing, and increasing the scale... credentials and degrees; (b) identification of opportunities to amplify, accelerate, or increase the scale of...

Summary of the 19th Joint EU-US Transport Task Force Workshop

DEFF Research Database (Denmark)

Angioni, C.; Mantica, P.; Naulin, Volker

2015-01-01

This conference report summarizes the contributions to, and discussions at, the 19th Joint EU-US Transport Task Force workshop, held in Culham, UK, during 8-11 September 2014. The workshop was organized under six topics: momentum transport, energetic particles, challenges in modelling transport i...

Responses to comments received on the draft final report of the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management

Energy Technology Data Exchange (ETDEWEB)

1994-10-01

The Task Force solicited comments on its Draft Final Report from a variety of sources. Letters were sent to over 400 individuals who had expressed interest in the interest in the Department`s radioactive waste, management programs, a notice was placed in the Federal Register, the morning session of the January 1993 meeting of the full Secretary of Energy Advisory Board was given over to discussion of the draft, and Task Force members and staff presented the effort at several professional meetings. Altogether 32 written comments were received. They are reproduced here, followed in each case by the Task Force`s response to specific suggestions made to improve the draft. (The panel did not respond to comments that simply reflected policy preferences or that praised the group`s effort.) With one exception, those specific suggestions are highlighted and given a letter designation from {open_quotes}A{close_quotes} to {open_quotes}Z{close_quotes}. The Task Force`s responses, written in the Fall 1993, are labeled in a like manner. For the one exception, a comments submitted by Judy Treichel, the Task Force`s response is printed on copies of her annotated pages.

Real-time changes in corticospinal excitability related to motor imagery of a force control task

DEFF Research Database (Denmark)

Tatemoto, Tsuyoshi; Tsuchiya, Junko; Numata, Atsuki

2017-01-01

Objective To investigate real-time excitability changes in corticospinal pathways related to motor imagery in a changing force control task, using transcranial magnetic stimulation (TMS). Methods Ten healthy volunteers learnt to control the contractile force of isometric right wrist dorsiflexion...... in order to track an on-screen sine wave form. Participants performed the trained task 40 times with actual muscle contraction in order to construct the motor image. They were then instructed to execute the task without actual muscle contraction, but by imagining contraction of the right wrist...... in dorsiflexion. Motor evoked potentials (MEPs), induced by TMS in the right extensor carpi radialis muscle (ECR) and flexor carpi radialis muscle (FCR), were measured during motor imagery. MEPs were induced at five time points: prior to imagery, during the gradual generation of the imaged wrist dorsiflexion...

Report by the International Space Station (ISS) Management and Cost Evaluation (IMCE) Task Force

Science.gov (United States)

Young, A. Thomas; Kellogg, Yvonne (Technical Monitor)

2001-01-01

The International Space Station (ISS) Management and Cost Evaluation Task Force (IMCE) was chartered to conduct an independent external review and assessment of the ISS cost, budget, and management. In addition, the Task Force was asked to provide recommendations that could provide maximum benefit to the U.S. taxpayers and the International Partners within the President's budget request. The Task Force has made the following principal findings: (1) The ISS Program's technical achievements to date, as represented by on-orbit capability, are extraordinary; (2) The Existing ISS Program Plan for executing the FY 02-06 budget is not credible; (3) The existing deficiencies in management structure, institutional culture, cost estimating, and program control must be acknowledged and corrected for the Program to move forward in a credible fashion; (4) Additional budget flexibility, from within the Office of Space Flight (OSF) must be provided for a credible core complete program; (5) The research support program is proceeding assuming the budget that was in place before the FY02 budget runout reduction of $1B; (6) There are opportunities to maximize research on the core station program with modest cost impact; (7) The U.S. Core Complete configuration (three person crew) as an end-state will not achieve the unique research potential of the ISS; (8) The cost estimates for the U.S.-funded enhancement options (e.g., permanent seven person crew) are not sufficiently developed to assess credibility. After these findings, the Task Force has formulated several primary recommendations which are published here and include: (1) Major changes must be made in how the ISS program is managed; (2) Additional cost reductions are required within the baseline program; (3) Additional funds must be identified and applied from the Human Space Flight budget; (4) A clearly defined program with a credible end-state, agreed to by all stakeholders, must be developed and implemented.

Natural Gas Deliverability Task Force report: A joint FERC/DOE project

International Nuclear Information System (INIS)

1992-09-01

The purpose of the FERC/DOE Natural Gas Deliverability Task Force Report was threefold: (1) to review current deliverability data for utility, accuracy, and timeliness; (2) to identify mechanisms for closing significant gaps in information resulting from changing market structures; and (3) to ensure that technologies are available to meet the needs of the emerging, competitive natural gas industry

Pseudo ribbon metal ion beam source

International Nuclear Information System (INIS)

Stepanov, Igor B.; Ryabchikov, Alexander I.; Sivin, Denis O.; Verigin, Dan A.

2014-01-01

The paper describes high broad metal ion source based on dc macroparticle filtered vacuum arc plasma generation with the dc ion-beam extraction. The possibility of formation of pseudo ribbon beam of metal ions with the parameters: ion beam length 0.6 m, ion current up to 0.2 A, accelerating voltage 40 kV, and ion energy up to 160 kV has been demonstrated. The pseudo ribbon ion beam is formed from dc vacuum arc plasma. The results of investigation of the vacuum arc evaporator ion-emission properties are presented. The influence of magnetic field strength near the cathode surface on the arc spot movement and ion-emission properties of vacuum-arc discharge for different cathode materials are determined. It was shown that vacuum-arc discharge stability can be reached when the magnetic field strength ranges from 40 to 70 G on the cathode surface

Pseudo ribbon metal ion beam source.

Science.gov (United States)

Stepanov, Igor B; Ryabchikov, Alexander I; Sivin, Denis O; Verigin, Dan A

2014-02-01

The paper describes high broad metal ion source based on dc macroparticle filtered vacuum arc plasma generation with the dc ion-beam extraction. The possibility of formation of pseudo ribbon beam of metal ions with the parameters: ion beam length 0.6 m, ion current up to 0.2 A, accelerating voltage 40 kV, and ion energy up to 160 kV has been demonstrated. The pseudo ribbon ion beam is formed from dc vacuum arc plasma. The results of investigation of the vacuum arc evaporator ion-emission properties are presented. The influence of magnetic field strength near the cathode surface on the arc spot movement and ion-emission properties of vacuum-arc discharge for different cathode materials are determined. It was shown that vacuum-arc discharge stability can be reached when the magnetic field strength ranges from 40 to 70 G on the cathode surface.

The influence of catch trials on the consolidation of motor memory in force field adaptation tasks

Directory of Open Access Journals (Sweden)

Anne eFocke

2013-07-01

Full Text Available In computational neuroscience it is generally accepted that human motor memory contains neural representations of the physics of the musculoskeletal system and the objects in the environment. These representations are called internal models. Force field studies, in which subjects have to adapt to dynamic perturbations induced by a robotic manipulandum, are an established tool to analyze the characteristics of such internal models. The aim of the current study was to investigate whether catch trials during force field learning could influence the consolidation of motor memory in more complex tasks. Thereby, the force field was more than double the force field of previous studies (35 Ns/m. Moreover, the arm of the subjects was not supported. A total of forty-six subjects participated in this study and performed center-out movements at a robotic manipulandum in two different force fields. Two control groups learned force field A on day 1 and were retested in the same force field on day 3 (AA. Two test groups additionally learned an interfering force field B (=-A on day 2 (ABA. The difference between the two test and control groups, respectively, was the absence (0% or presence (19% of catch trials, in which the force field was turned off suddenly. The results showed consolidation of force field A on day 3 for both control groups. Test groups showed no consolidation of force field A (19% catch trials and even poorer performance on day 3 (0% catch trials. In conclusion, it can be stated that catch trials seem to have a positive effect on the performance on day 3 but do not trigger a consolidation process as shown in previous studies that used a lower force field viscosity with supported arm. These findings indicate that the results of previous studies in which less complex tasks were analyzed, cannot be fully transferred to more complex tasks. Moreover, the effects of catch trials in these situations are insufficiently understood and further research

Amorphous metal matrix composite ribbons

International Nuclear Information System (INIS)

Barczy, P.; Szigeti, F.

1998-01-01

Composite ribbons with amorphous matrix and ceramic (SiC, WC, MoB) particles were produced by modified planar melt flow casting methods. Weldability, abrasive wear and wood sanding examinations were carried out in order to find optimal material and technology for elevated wear resistance and sanding durability. The correlation between structure and composite properties is discussed. (author)

The OMERACT ultrasound task force -- Advances and priorities

DEFF Research Database (Denmark)

D'Agostino, Maria-Antonietta; Conaghan, Philip G; Naredo, Esperanza

2009-01-01

This article reports the most recent work of the OMERACT Ultrasound Task Force (post OMERACT 8) and highlights of future research priorities discussed at the OMERACT 9 meeting, Kananaskis, Canada, May 2008. Results of 3 studies were presented: (1) assessing intermachine reliability; (2) applying...... system for the hand on other joints (including shoulder). Study conclusions were discussed and a future research agenda was generated, notably the further development of a Global OMERACT Sonography Scoring (GLOSS) system in RA, emphasizing the importance of testing feasibility and added value over...... standard clinical variables. Future disease areas of importance to develop include a scoring system for enthesitis and osteoarthritis....

Florida Model Task Force on Diabetic Retinopathy: Development of an Interagency Network.

Science.gov (United States)

Groff, G.; And Others

1990-01-01

This article describes the development of a mechanism to organize a network in Florida for individuals who are at risk for diabetic retinopathy. The task force comprised representatives from governmental, academic, professional, and voluntary organizations. It worked to educate professionals, patients, and the public through brochures, resource…

Hydrostatic extrusion of Cu-Ag melt spun ribbon

Science.gov (United States)

Hill, Mary Ann; Bingert, John F.; Bingert, Sherri A.; Thoma, Dan J.

1998-01-01

The present invention provides a method of producing high-strength and high-conductance copper and silver materials comprising the steps of combining a predetermined ratio of the copper with the silver to produce a composite material, and melt spinning the composite material to produce a ribbon of copper and silver. The ribbon of copper and silver is heated in a hydrogen atmosphere, and thereafter die pressed into a slug. The slug then is placed into a high-purity copper vessel and the vessel is sealed with an electron beam. The vessel and slug then are extruded into wire form using a cold hydrostatic extrusion process.

Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task 2. LSSA project

Science.gov (United States)

Duffy, M. T.; Berkman, S.; Moss, H. S.; Cullen, G. W.

1978-01-01

The results of emission spectroscopic analysis indicate that molten silicon can remain in contact with hot-pressed Si3N4 (99.2 percent theoretical density) for prolonged periods without attaining the impurity content level of the nitride. Although MgO was used as binder, Mg was not found present in the silicon sessile drop in quantities much above the level initially present in the silicon source material. Preliminary experiments with EFG-type dies coated with CVD Si3N4 or CVD SiOxNy indicate that capillary rise does not occur readily in these dies. The same was found to be true of hot-pressed and reaction-sintered Si3N4 obtained commercially. However, when dies were formed by depositing CVD layers on shaped silicon slabs, a column of molten silicon was maintained in each CVD die while being heated in contact with a crucible of molten silicon. Preliminary wetting of dies appears necessary for EFG growth. Several ribbon growth experiments were performed from V-shaped dies.

Martensitic transformation behavior and shape memory properties of Ti-Ni-Pt melt-spun ribbons

International Nuclear Information System (INIS)

Inamura, Tomonari; Takahashi, Yohei; Hosoda, Hideki; Wakashima, Kenji; Nagase, Takeshi; Nakano, Takayoshi; Umakoshi, Yukichi; Miyazaki, Shuichi

2006-01-01

Martensitic transformation behavior and shape memory properties of a Ti 50 Ni 40 Pt 10 (TiNiPt) melt-spun ribbon fabricated by a single roll melt-spinning technique were characterized. The constituent phases of the as-spun ribbon were B2 (parent phase) and B19 (martensite phase) at room temperature. The B2-B19 martensitic transformation temperatures of the as-spun ribbon were 100K higher than those of the bulk-material with the same chemical composition. The martensitic transformation temperatures of the as-spun ribbon were decreased with increasing the temperature of the heat-treatment made after the melt-spinning. The as-spun ribbon and the heat-treated ribbons exhibited shape recovery by heating and/or pseudoelasticity. The martensitic transformation temperatures determined from the temperature dependence of the 0.2% flow stress of the pseudoelastic deformation were in good agreement with those of B2-B19 martensitic transformation determined by DSC. It was confirmed that the observed shape recovery and pseudoelasticity are shape memory effect and superelasticity due to the B2-B19 martensitic transformation. Shape memory effect and superelasticity of melt-spun TiNiPt alloy were found to appear at higher temperatures compared to those of Bulk-material with the same composition. (author)

Defense Science Board Task Force Report: Predicting Violent Behavior

Science.gov (United States)

2012-08-01

Boeing • Coca Cola • Disney • Intel Corporation D E F E N S E S C I E N C E B O A R D | D E P A R T M E N T O F D E F E N S E DSB TASK FORCE...University of North Carolina Corporations:  Microsoft  Coca Cola  Boeing  Disney D E F E N S E S C I E N C E B O A R D | D E P A R T M E

Executive summary of European Task Force document on diagnostic tools in rhinology

NARCIS (Netherlands)

Hellings, P. W.; Scadding, G.; Alobid, I.; Bachert, C.; Fokkens, W. J.; Gerth van Wijk, R.; Gevaerts, P.; Guilemany, J.; Kalogjera, L.; Lund, V. J.; Mullol, J.; Passalacqua, G.; Toskala, E.; van Drunen, C. M.

2012-01-01

This Executive Summary of the EAACI Task Force document on Diagnostic Tools in Rhinology provides the readers with an over- view of the currently available tools for diagnosis of nasal and sino-nasal disease, published in full version in the first issue of Clini- cal and Translational Allergy. A

Multisociety task force recommendations of competencies in Pulmonary and Critical Care Medicine.

Science.gov (United States)

Buckley, John D; Addrizzo-Harris, Doreen J; Clay, Alison S; Curtis, J Randall; Kotloff, Robert M; Lorin, Scott M; Murin, Susan; Sessler, Curtis N; Rogers, Paul L; Rosen, Mark J; Spevetz, Antoinette; King, Talmadge E; Malhotra, Atul; Parsons, Polly E

2009-08-15

Numerous accrediting organizations are calling for competency-based medical education that would help define specific specialties and serve as a foundation for ongoing assessment throughout a practitioner's career. Pulmonary Medicine and Critical Care Medicine are two distinct subspecialties, yet many individual physicians have expertise in both because of overlapping content. Establishing specific competencies for these subspecialties identifies educational goals for trainees and guides practitioners through their lifelong learning. To define specific competencies for graduates of fellowships in Pulmonary Medicine and Internal Medicine-based Critical Care. A Task Force composed of representatives from key stakeholder societies convened to identify and define specific competencies for both disciplines. Beginning with a detailed list of existing competencies from diverse sources, the Task Force categorized each item into one of six core competency headings. Each individual item was reviewed by committee members individually, in group meetings, and conference calls. Nominal group methods were used for most items to retain the views and opinions of the minority perspective. Controversial items underwent additional whole group discussions with iterative modified-Delphi techniques. Consensus was ultimately determined by a simple majority vote. The Task Force identified and defined 327 specific competencies for Internal Medicine-based Critical Care and 276 for Pulmonary Medicine, each with a designation as either: (1) relevant, but competency is not essential or (2) competency essential to the specialty. Specific competencies in Pulmonary and Critical Care Medicine can be identified and defined using a multisociety collaborative approach. These recommendations serve as a starting point and set the stage for future modification to facilitate maximum quality of care as the specialties evolve.

Strength training does not affect the accuracy of force gradation in an isometric force task in young men.

NARCIS (Netherlands)

Smits-Engelsman, B.C.M.; Smits, R.; Oomen, J.; Duysens, J.E.J.

2008-01-01

The aim of this study is to investigate potential differences in fine motor control between strength trained (ST) and non-strength trained (NT) individuals. By use of an isometric force production task, two groups, 20 ST (mean age 25.6, SD 4.9) and 19 NT (mean age 24.1, SD 2.9) male individuals,

Report of the Interagency Task Force on Carbon Capture and Storage

Energy Technology Data Exchange (ETDEWEB)

None

2010-08-01

Carbon capture and storage (CCS) refers to a set of technologies that can greatly reduce carbon dioxide (CO{sub 2}) emissions from new and existing coal- and gas-fired power plants, industrial processes, and other stationary sources of CO{sub 2}. In its application to electricity generation, CCS could play an important role in achieving national and global greenhouse gas (GHG) reduction goals. However, widespread cost-effective deployment of CCS will occur only if the technology is commercially available and a supportive national policy framework is in place. In keeping with that objective, on February 3, 2010, President Obama established an Interagency Task Force on Carbon Capture and Storage composed of 14 Executive Departments and Federal Agencies. The Task Force, co-chaired by the Department of Energy (DOE) and the Environmental Protection Agency (EPA), was charged with proposing a plan to overcome the barriers to the widespread, cost-effective deployment of CCS within ten years, with a goal of bringing five to ten commercial demonstration projects online by 2016. Composed of more than 100 Federal employees, the Task Force examined challenges facing early CCS projects as well as factors that could inhibit widespread commercial deployment of CCS. In developing the findings and recommendations outlined in this report, the Task Force relied on published literature and individual input from more than 100 experts and stakeholders, as well as public comments submitted to the Task Force. The Task Force also held a large public meeting and several targeted stakeholder briefings. While CCS can be applied to a variety of stationary sources of CO{sub 2}, its application to coal-fired power plant emissions offers the greatest potential for GHG reductions. Coal has served as an important domestic source of reliable, affordable energy for decades, and the coal industry has provided stable and quality high-paying jobs for American workers. At the same time, coal-fired power

Evolutionary analysis of a novel zinc ribbon in the N-terminal region of threonine synthase.

Science.gov (United States)

Kaur, Gurmeet; Subramanian, Srikrishna

2017-10-18

Threonine synthase (TS) catalyzes the terminal reaction in the biosynthetic pathway of threonine and requires pyridoxal phosphate as a cofactor. TSs share a common catalytic domain with other fold type II PALP dependent enzymes. TSs are broadly grouped into two classes based on their sequence, quaternary structure, and enzyme regulation. We report the presence of a novel zinc ribbon domain in the N-terminal region preceding the catalytic core in TS. The zinc ribbon domain is present in TSs belonging to both classes. Our sequence analysis reveals that archaeal TSs possess all zinc chelating residues to bind a metal ion that are lacking in the structurally characterized homologs. Phylogenetic analysis suggests that TSs with an N-terminal zinc ribbon likely represents the ancestral state of the enzyme while TSs without a zinc ribbon must have diverged later in specific lineages. The zinc ribbon and its N- and C-terminal extensions are important for enzyme stability, activity and regulation. It is likely that the zinc ribbon domain is involved in higher order oligomerization or mediating interactions with other biomolecules leading to formation of larger metabolic complexes.

Changes in ipsilateral motor cortex activity during a unilateral isometric finger task are dependent on the muscle contraction force

International Nuclear Information System (INIS)

Shibuya, Kenichi; Kuboyama, Naomi; Tanaka, Junya

2014-01-01

It is possible to examine bilateral primary motor cortex (M1) activation during a sustained motor task using near-infrared spectroscopy (NIRS), in which it is assumed that increased oxygenation reflects cortical activation. The purpose of this study was to examine bilateral M1 activation in response to graded levels of force production during a unilateral finger task. Ten healthy right-handed male subjects participated in this study. NIRS probes were placed over the cortex to measure M1 activity while the subjects performed the finger task. The subjects performed a 10 s finger task at 20%, 40%, and 60% of the maximal voluntary contraction (MVC). Symmetrical activation was found over both M1 areas at all force levels investigated. In the contralateral M1, there were significant differences in oxygenation between 20% and 60% MVC, as well as between 40% and 60% MVC. In the ipsilateral M1, there were significant differences among all force levels. These results indicate the ipsilateral M1 takes part in muscle force control. (paper)

The Internet Engineering Task Force and The Future of Internet

OpenAIRE

Baccelli , Emmanuel; Clausen , Thomas Heide; Jacquet , Philippe

2009-01-01

International audience; If one wants to identify where ideas and initiatives regarding the Internet are being confronted, the Internet Engineering Task Force (IETF) is unavoidable. Created in 1986 by US government agencies (DoD, Department of Energy, NASA, NSF) to supervise the design and deployment of Internet protocols, it was initially open only for US government funded researchers. Early 1987 saw a dozen of industry representatives invited, and in a matter of months, the IETF was opened t...

Variation of boron concentration in metallic glass ribbons

International Nuclear Information System (INIS)

Nagy, A.Z.; Vasvari, B.; Bakos, L.; Duwez, P.; Bogancs, J.; Nazarov, V.M.

1980-01-01

The boron concentration of Fe 40 Ni 40 P 14 B 6 , Fe 32 Ni 36 Cr 14 P 12 B 6 and Fe 40 Ni 40 B 20 metallic glasses is measured by neutron activation analysis on both surfaces of the ribbon samples. It is found that the boron concentration is always higher on the bright side of the ribbon than that on the dull side which is in contact with the cold surface of the wheel during the rapid quenching from the melt. A possible explanation is given in terms of the solid-liquid interface moving rapidly from the cooled surface to the free surface when preparing the samples. (author)

Theoretical and experimental studies on transient forced convection heat transfer of helium gas

International Nuclear Information System (INIS)

Liu, Qiusheng; Fukuda, Katsuya; Shibahara, Makoto

2008-01-01

Forced convection transient heat transfer for helium gas at various periods of exponential increase of heat input to a horizontal cylinder and a plate (ribbon) one was experimentally and theoretically studied. In the experimental studies, the authors measured heat flux, surface temperature, and transient heat transfer coefficients for forced convection flow of helium gas over a horizontal cylinder and a plate (ribbon) one under wide experimental conditions. Empirical correlations for quasi-steady-state heat transfer and transient heat transfer were obtained based on the experimental data. In the theoretical study, transient heat transfer was numerically solved based on a turbulent flow model. The values of numerical solution for surface temperature and heat flux were compared and discussed with authors' experimental data. (author)

Low-frequency magnetization processes in chemically etched Co-based amorphous ribbons

International Nuclear Information System (INIS)

Betancourt, I.; Martinez, L.A.; Valenzuela, R.

2005-01-01

In this report we present a study of the magnetization processes for Co-based amorphous ribbons at low frequencies (10 Hz-13 MHz) as a function of decreasing thicknesses attained by chemical etching. Reversible domain-wall bulging, characterized by initial permeability and relaxation frequency, was monitored by means of inductance measurements. The real part of inductance (proportional to initial permeability) exhibited a decreasing trend with diminishing ribbon thickness, together with an increasing tendency for the relaxation frequency. For high amplitude of the ac field (leading to domain-wall unpinning), reduced ribbon thickness showed a deleterious-enhancement effect on irreversible domain-wall displacement, which was observed for both real and imaginary inductance spectroscopic plots. Results are interpreted in terms of reduced domain-wall pinning distances resulting from thinner alloy samples

Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6b, 6b and 6b

Energy Technology Data Exchange (ETDEWEB)

Hodgkinson, David [Quintessa, Henley-on-Thames (United Kingdom); Black, John [In Situ Solutions, East Bridgford (United Kingdom)

2005-03-01

This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions.

A new dental powder from nanocrystalline melt-spun Ag-Sn-Cu alloy ribbons

International Nuclear Information System (INIS)

Do-Minh, N.; Le-Thi, C.; Nguyen-Anh, S.

2003-01-01

A new non-gamma-two dental powder has been developed from nanocrystalline melt-spun Ag-Sn-Cu alloy ribbons. The amalgam made from this powder exhibits excellent properties for dental filling. The nanocrystalline microstructure was found for the first time in as-spun and heat treated Ag(27-28)Sn(9-32) Cu alloy ribbons, using X-ray diffraction, scanning electron microscopy and energy-dispersive spectroscopy. As-spun ribbons exhibited a multi-phase microstructure with preferred existence of β (Ag 4 Sn) phase formed during rapid solidification (RS) due to supersaturating of copper (Cu) atoms and homogenous nanostructure with subgrain size of about (40-50) nm, which seems to be developed during RS process and can be caused by eutectic reaction of the Ag 3 Sn/Ag 4 Sn-Cu 3 Sn system. In heat treated ribbons the clustering of Cu atoms was always favored and stable in an ageing temperature and time interval determined by Cu content. The heat treatment led to essential changes of subgrain morphology, resulted in the appearance of large-angle boundaries with fine Cu 3 Sn precipitates and forming typical recrystallization twins. Such a microstructure variation in melt-spun ribbons could eventually yield enhanced technological, clinical and physical properties of the dental products, controlled by the ADA Specification N deg 1 and reported before. Thus, using the rapid solidification technique a new non-gamma-two dental material of high quality, nanocrystalline ribbon powder, can be produced. Copyright (2003) AD-TECH - International Foundation for the Advancement of Technology Ltd

Optimization of muscle activity for task-level goals predicts complex changes in limb forces across biomechanical contexts.

Directory of Open Access Journals (Sweden)

J Lucas McKay

Full Text Available Optimality principles have been proposed as a general framework for understanding motor control in animals and humans largely based on their ability to predict general features movement in idealized motor tasks. However, generalizing these concepts past proof-of-principle to understand the neuromechanical transformation from task-level control to detailed execution-level muscle activity and forces during behaviorally-relevant motor tasks has proved difficult. In an unrestrained balance task in cats, we demonstrate that achieving task-level constraints center of mass forces and moments while minimizing control effort predicts detailed patterns of muscle activity and ground reaction forces in an anatomically-realistic musculoskeletal model. Whereas optimization is typically used to resolve redundancy at a single level of the motor hierarchy, we simultaneously resolved redundancy across both muscles and limbs and directly compared predictions to experimental measures across multiple perturbation directions that elicit different intra- and interlimb coordination patterns. Further, although some candidate task-level variables and cost functions generated indistinguishable predictions in a single biomechanical context, we identified a common optimization framework that could predict up to 48 experimental conditions per animal (n = 3 across both perturbation directions and different biomechanical contexts created by altering animals' postural configuration. Predictions were further improved by imposing experimentally-derived muscle synergy constraints, suggesting additional task variables or costs that may be relevant to the neural control of balance. These results suggested that reduced-dimension neural control mechanisms such as muscle synergies can achieve similar kinetics to the optimal solution, but with increased control effort (≈2× compared to individual muscle control. Our results are consistent with the idea that hierarchical, task

Task force's viewpoint of the current BRH Program. Gonad shield, Part F

International Nuclear Information System (INIS)

Dolezal, A.

1975-01-01

A previous report on radiation protection during diagnostic exposure is reviewed. Some topics discussed are: Task Force regulations for the model by which routine use of patient shielding or gonad shielding would be required; shielding in relation to collimation, scatter radiation, and enforcement of regulations; and proposed regulations for reduction of unnecessary radiation

Magnetic properties, phase evolution, and microstructure of the Co–Zr–V ribbons

International Nuclear Information System (INIS)

Hou, Zhipeng; Su, Feng; Xu, Shifeng; Zhang, Jinbao; Wu, Chunji; Liu, Dan; Wei, Beipei; Wang, Wenquan

2013-01-01

The substitution of V for Zr significantly impeded the growth of grain in the Co 82 Zr 18 ribbons during melt spinning and the amorphous Co 82 Zr 13 V 5 melt-spun ribbons were successfully produced at a wheel speed of 40 m/s. The values of coercivity H c and maximum energy product (BH) max first increased, reaching maximum at 560 °C and then they decreased sharply with increasing the annealing temperature. The optimal magnetic properties of H c =4.0 kOe and (BH) max =5.0 MGOe were obtained in the amorphous ribbons annealed at 560 °C. A suitable grain size of Co 11 Zr 2 phase was considered to be the main reason for the increase in coercivity. - Highlights: • High performance was obtained in Co 82 Zr 13 V 5 amorphous ribbons annealed. • We proved the hard magnetic phase was Co 11 Zr 2 phase. • Suitable grain size of Co 11 Zr 2 phase was the main reason for increase in coercivity

Developing a Community-Wide Initiative to Address Childhood Adversity and Toxic Stress: A Case Study of The Philadelphia ACE Task Force.

Science.gov (United States)

Pachter, Lee M; Lieberman, Leslie; Bloom, Sandra L; Fein, Joel A

The Philadelphia ACE Task Force is a community based collaborative of health care providers, researchers, community-based organizations, funders, and public sector representatives. The mission of the task force is to provide a venue to address childhood adversity and its consequences in the Philadelphia metropolitan region. In this article we describe the origins and metamorphosis of the Philadelphia ACE Task Force, which initially was narrowly focused on screening for adverse childhood experiences (ACEs) in health care settings but expanded its focus to better represent a true community-based approach to sharing experiences with addressing childhood adversity in multiple sectors of the city and region. The task force has been successful in developing a research agenda and conducting research on ACEs in the urban context, and has identified foci of local activity in the areas of professional training and workforce development, community education, and local practical interventions around adversity, trauma, and resiliency. In this article we also address the lessons learned over the first 5 years of the task force's existence and offers recommendations for future efforts to build a local community-based ACEs collaborative. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

75 FR 11893 - Food and Drug Administration Transparency Task Force; Request for Comments

Science.gov (United States)

2010-03-12

..., e-mail: [email protected] . SUPPLEMENTARY INFORMATION: I. Background Transparency promotes...) improving FDA's disclosure of information to the public; and (3) improving FDA's transparency to regulated... phase of the transparency initiative. II. Scope of the Meeting The Task Force is collecting information...

Large magnetic entropy change in melt-spun LaFe11.5Si1.5 ribbons

International Nuclear Information System (INIS)

Xie Kun; Song Xiaoping; Zhu Yaoming; Lv Weipeng; Sun Zhanbo

2004-01-01

The microstructure transformation and the magnetic entropy change of LaFe 11.5 Si 1.5 melt-spun ribbons were investigated. The melt-spun ribbons show a homogeneous distribution of elements, and the homogeneity develops further after 5 h annealing. XRD results show that the ribbons are composed of NaZn 13 -type LaFe 11.5 Si 1.5 compounds and an α-Fe phase. After annealing, the ribbons crystallize well in the NaZn 13 -type structure and exhibit a very large magnetic entropy change. A first-order magnetic transition is observed in the annealed ribbons, and this is believed to be the origin of the large magnetic entropy. These results suggest that NaZn 13 -type LaFe 11.5 Si 1.5 compounds with a large magnetic entropy change can be produced by melt-spinning, the annealing time can be shortened significantly and the production cost of the magnetic refrigerant will be cut down accordingly

Manufacture of ribbon and solar cells of material of semiconductor grade

International Nuclear Information System (INIS)

1980-01-01

A method is described of producing ribbon-like substantially monocrystalline bodies of silicon or other materials of semiconductor grade suitable for use in solar cells or other semiconductor devices. A tube of the material is made and a photovoltaic junction formed in it. The tube is then divided lengthwise into a number of ribbon-like bodies. The photovoltaic junction can be formed either by diffusion or by ion-implantation. (U.K.)

Fiscal 1974 Sunshine Project result report. R and D on photovoltaic power generation system (R and D on Si ribbon crystal vertical pulling method); 1974 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribbon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-30

This research includes (1) basic study on Si ribbon crystal vertical pulling method, (2) basic design of continuous Si ribbon crystal vertical pulling mechanism, (3) basic study on vertically pulled Si ribbon crystal, (4) study on capillary materials for capillary crystal pulling method, and (5) basic study on AlAs-GaAs system compound semiconductors. In the 1st research, for Si ribbon crystal vertical pulling growth, the ribbon crystal pulling equipment was prepared and modified, and Si crystals were obtained by capillary and web methods. In the 2nd research, for development of Si ribbon crystal vertical pulling growth technology, study was made on the simple energy-saving resource-saving continuous automatic production process. In the 3rd research, measurement was made on various characteristics of ribbon crystals. In the 4th research, study was made on requirements of capillary materials from the viewpoint of capillary growth mechanism. In the 5th research, basic technology for solar cell production was established through growth experiments of AlAs-GaAs mixed crystals and multiple epitaxial crystal layers. (NEDO)

The President’s Identity Theft Task Force Report

Science.gov (United States)

2008-09-01

effeCtIve, RISk-BASed ReSPOnSeS tO dAtA BReACheS SUffeRed By fedeRAl AGenCIeS Issue Data Breach Guidance to Agencies Publish a “Routine Use...and developing a data breach response plan. The FTC will continue to seek opportunities to work with state and local officials and policymakers...of fiscal year 2008. ReCOMMendAtIOn 4: enSURe effeCtIve, RISk-BASed ReSPOnSeS tO dAtA BReACheS SUffeRed By fedeRAl AGenCIeS The Task Force

Contribution of the Cerebellum in Cue-Dependent Force Changes During an Isometric Precision Grip Task.

Science.gov (United States)

Kutz, Dieter F; Schmid, Barbara C; Meindl, Tobias; Timmann, Dagmar; Kolb, Florian P

2016-08-01

The "raspberry task" represents a precision grip task that requires continuous adjustment of grip forces and pull forces. During this task, subjects use a specialised grip rod and have to increase the pull force linearly while the rod is locked. The positions of the fingers are unrestrained and freely selectable. From the finger positions and the geometry of the grip rod, a physical lever was derived which is a comprehensive measurement of the subject's grip behaviour. In this study, the involvement of the cerebellum in establishing cued force changes (CFC) was examined. The auditory stimulus was associated with a motor behaviour that has to be readjusted during an ongoing movement that already started. Moreover, cerebellar involvement on grip behaviour was examined. The results show that patients presenting with degenerating cerebellar disease (CBL) were able to elicit CFC and were additionally able to optimise grip behaviour by minimising the lever. Comparison of the results of CBL with a control group of healthy subjects showed, however, that the CFC incidence was significantly lower and the reduction of the lever was less in CBL. Hence, the cerebellum is involved not only in the classical conditioning of reflexes but also in the association of sensory stimuli with complex changes in motor behaviour. Furthermore, the cerebellum is involved in the optimisation of grip behaviour during ongoing movements. Recent studies lead to the assumption that the cerebello-reticulo-spinal pathway might be important for the reduced optimisation of grip behaviour in CBL.

Treating juvenile idiopathic arthritis to target: recommendations of an international task force.

Science.gov (United States)

Ravelli, Angelo; Consolaro, Alessandro; Horneff, Gerd; Laxer, Ronald M; Lovell, Daniel J; Wulffraat, Nico M; Akikusa, Jonathan D; Al-Mayouf, Sulaiman M; Antón, Jordi; Avcin, Tadej; Berard, Roberta A; Beresford, Michael W; Burgos-Vargas, Ruben; Cimaz, Rolando; De Benedetti, Fabrizio; Demirkaya, Erkan; Foell, Dirk; Itoh, Yasuhiko; Lahdenne, Pekka; Morgan, Esi M; Quartier, Pierre; Ruperto, Nicolino; Russo, Ricardo; Saad-Magalhães, Claudia; Sawhney, Sujata; Scott, Christiaan; Shenoi, Susan; Swart, Joost F; Uziel, Yosef; Vastert, Sebastiaan J; Smolen, Josef S

2018-06-01

Recent therapeutic advances in juvenile idiopathic arthritis (JIA) have made remission an achievable goal for most patients. Reaching this target leads to improved outcomes. The objective was to develop recommendations for treating JIA to target. A Steering Committee formulated a set of recommendations based on evidence derived from a systematic literature review. These were subsequently discussed, amended and voted on by an international Task Force of 30 paediatric rheumatologists in a consensus-based, Delphi-like procedure. Although the literature review did not reveal trials that compared a treat-to-target approach with another or no strategy, it provided indirect evidence regarding an optimised approach to therapy that facilitated development of recommendations. The group agreed on six overarching principles and eight recommendations. The main treatment target, which should be based on a shared decision with parents/patients, was defined as remission, with the alternative target of low disease activity. The frequency and timeline of follow-up evaluations to ensure achievement and maintenance of the target depend on JIA category and level of disease activity. Additional recommendations emphasise the importance of ensuring adequate growth and development and avoiding long-term systemic glucocorticoid administration to maintain the target. All items were agreed on by more than 80% of the members of the Task Force. A research agenda was formulated. The Task Force developed recommendations for treating JIA to target, being aware that the evidence is not strong and needs to be expanded by future research. These recommendations can inform various stakeholders about strategies to reach optimal outcomes for JIA. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The Nicest way to migrate your Windows computer ( The Windows 2000 Migration Task Force)

CERN Document Server

2001-01-01

With Windows 2000, CERN users will discover a more stable and reliable working environment and will have access to all the latest applications. The Windows 2000 Migration Task Force - a representative from each division.

Siting of a low-level radioactive waste management facility - environmental assessment experiences of the Canadian siting task force

International Nuclear Information System (INIS)

Gorber, D.M.; Story, V.A.

1995-01-01

After public opposition to the plans for a low-level radioactive waste facility at one of two candidate areas at Port Hope, Canada the Environmental Assessment process was postponed, and an independent Siting Process Task Force was set-up to assess the most suitable technologies for LLRW disposal, the areas with the best potential in the province to use these technologies, and the most promising approaches to site selection. The Task Force recommended a five-phased siting process known as the 'Co-operative Siting Process', which was based on the voluntary participation of local communities and a collaborative, joint-planning style of decision making. An independent Siting Task Force was to be established to ensure that the principles of the recommended process was upheld. This siting process is still underway, and problems and successes that have been encountered are summarized in this contribution

Modeling good research practices--overview: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force-1.

Science.gov (United States)

Caro, J Jaime; Briggs, Andrew H; Siebert, Uwe; Kuntz, Karen M

2012-01-01

Models-mathematical frameworks that facilitate estimation of the consequences of health care decisions-have become essential tools for health technology assessment. Evolution of the methods since the first ISPOR modeling task force reported in 2003 has led to a new task force, jointly convened with the Society for Medical Decision Making, and this series of seven papers presents the updated recommendations for best practices in conceptualizing models; implementing state-transition approaches, discrete event simulations, or dynamic transmission models; dealing with uncertainty; and validating and reporting models transparently. This overview introduces the work of the task force, provides all the recommendations, and discusses some quandaries that require further elucidation. The audience for these papers includes those who build models, stakeholders who utilize their results, and, indeed, anyone concerned with the use of models to support decision making.

Product Evaluation Task Force Phase Two report for BWR/PWR dissolver wastes

International Nuclear Information System (INIS)

Francis, A.J.

1990-01-01

It has been proposed that all Intermediate Level Wastes arising at Sellafield should be encapsulated prior to ultimate disposal. The Product Evaluation Task Force (PETF) was set up to investigate possible encapsulants and to produce an adequate data base to justify the preferred matrices. This report details the work carried out, under Phase 2 of the Product Evaluation Task Force programme, on BWR/PWR Dissolver Wastes. Three possible types of encapsulants for BWR/PWR Dissolver Wastes:- Inorganic cements, Polymer cements and Polymers are evaluated using the Kepner Tregoe decision analysis technique. This technique provides a methodology for scoring and ranking alternative options and evaluating any risks associated with an option. The analysis shows that for all four stages of waste management operations ie Storage, Transport, handling and emplacement, Disposal and Process, cement matrices are considerably superior to other potential matrices. A matrix, consisting of three parts Blast Furnace Slag (BFS) to one part Ordinary Portland Cement (OPC), is recommended for Phase 3 studies on BWR/PWR Dissolver Wastes. (author)

Product Evaluation Task Force Phase Two report for MEB crud/filter aid

International Nuclear Information System (INIS)

Francis, A.J.

1991-01-01

It has been proposed that all Intermediate Level Wastes arising at Sellafield should be encapsulated prior to ultimate disposal. The Product Evaluation Task Force (PETF) was set up to investigate possible encapsulants and to produce an adequate data base to justify the preferred matrices. This report details the work carried out, under Phase 2 of the Product Evaluation Task Force programme, on MEB Crud/Filter Aid. Three possible types of encapsulants for MEB Crud/Filter Aid:- Inorganic cements, Polymer cements, and Polymers are evaluated using the Kepner Tregoe decision and analysis technique. This technique provides a methodology for scoring and ranking alternative options and evaluating any risks associated with an option. The analysis shows that for all four stages of waste management operations, ie Storage, Transport, handling and emplacement, Disposal and, Process, cement matrices are considerably superior to other potential matrices. A matrix, consisting of nine parts Blast Furnace Slag (BFS) to one part Ordinary Portland Cement (OPC) is recommended as the preferred matrix for Phase 3 studies on MEB/Filter Aid. (author)

Report of the Task Force on Low-Level Radioactive Waste. Position paper

International Nuclear Information System (INIS)

1980-01-01

The Radiation Policy Council formed a Task Force in May 1980 to consider the problems associated with low-level radioactive waste disposal. Two major objectives were developed by the Task Force: (1) To recommend Federal policy for improving coordination and implementation of Federal and non-Federal programs that have been established to obtain solutions to existing low-level waste disposal problems, and (2) to recommend Federal policy for disposal of low-level waste containing minimal activity for which alternative disposal methods to existing shallow land burial practices may be acceptable for protecting the public health. These wastes constitute a significant fraction of what is currently classified as low-level radioactive wastes. Included are most of the wastes currently destined for shallow land burial from medical and research institutions, as well as from other sources. Such wastes include liquid scintillation vials, dry solids, animal carcasses, and paper trash; there are many items included which are needlessly classified, on a purely arbitrary basis, as radioactive waste merely because they contain detectable radioactive materials. It is this waste which is of major concern

75 FR 41808 - Narrow Woven Ribbons With Woven Selvedge From the People's Republic of China: Final Determination...

Science.gov (United States)

2010-07-19

... Ribbon Company, Inc. (``Petitioner''); Yama; and Yangzhou Bestpak Gifts & Crafts Co., Ltd. (``Bestpak... liquid petroleum gas from the supplier to Yama's factory.\\10\\ \\10\\ See Final Analysis Memorandum for Yama... limited to gift bags, gift boxes and/ or other types of ribbon. Narrow woven ribbons subject to the...

Family pediatrics: report of the Task Force on the Family.

Science.gov (United States)

Schor, Edward L

2003-06-01

WHY A TASK FORCE ON THE FAMILY? The practice of pediatrics is unique among medical specialties in many ways, among which is the nearly certain presence of a parent when health care services are provided for the patient. Regardless of whether parents or other family members are physically present, their influence is pervasive. Families are the most central and enduring influence in children's lives. Parents are also central in pediatric care. The health and well-being of children are inextricably linked to their parents' physical, emotional and social health, social circumstances, and child-rearing practices. The rising incidence of behavior problems among children attests to some families' inability to cope with the increasing stresses they are experiencing and their need for assistance. When a family's distress finds its voice in a child's symptoms, pediatricians are often parents' first source for help. There is enormous diversity among families-diversity in the composition of families, in their ethnic and racial heritage, in their religious and spiritual orientation, in how they communicate, in the time they spend together, in their commitment to individual family members, in their connections to their community, in their experiences, and in their ability to adapt to stress. Within families, individuals are different from one another as well. Pediatricians are especially sensitive to differences among children-in their temperaments and personalities, in their innate and learned abilities, and in how they view themselves and respond to the world around them. It is remarkable and a testament to the effort of parents and to the resilience of children that most families function well and most children succeed in life. Family life in the United States has been subjected to extensive scrutiny and frequent commentary, yet even when those activities have been informed by research, they tend to be influenced by personal experience within families and by individual and

International veterinary epilepsy task force consensus proposal : diagnostic approach to epilepsy in dogs

NARCIS (Netherlands)

De Risio, Luisa; Bhatti, Sofie; Muñana, Karen; Penderis, Jacques; Stein, Veronika; Tipold, Andrea; Berendt, Mette; Farqhuar, Robyn; Fischer, Andrea; Long, Sam; Mandigers, Paul J J; Matiasek, Kaspar; Packer, Rowena M A; Pakozdy, Akos; Patterson, Ned; Platt, Simon; Podell, Michael; Potschka, Heidrun; Batlle, Martí Pumarola; Rusbridge, Clare; Volk, Holger A

2015-01-01

This article outlines the consensus proposal on diagnosis of epilepsy in dogs by the International Veterinary Epilepsy Task Force. The aim of this consensus proposal is to improve consistency in the diagnosis of epilepsy in the clinical and research settings. The diagnostic approach to the patient

The OMERACT ultrasound task force--status and perspectives

DEFF Research Database (Denmark)

Naredo, Esperanza; Wakefield, Richard J; Iagnocco, Annamaria

2011-01-01

- and interobserver reliability exercise; and (5) Delphi definition exercise in hand osteoarthritis, and reliability exercises. Study conclusions were discussed, and a future research agenda was approved, notably further validation of an OMERACT ultrasound global synovitis score (GLOSS) in RA, emphasizing......This article reports the most recent work of the Outcome Measures in Rheumatology (OMERACT) Ultrasound Task Force, and highlights the future research priorities discussed at the OMERACT 10 meeting. Results of the following studies were presented: (1) intra- and interobserver reliability...... of ultrasound detecting and scoring synovitis in different joints of patients with rheumatoid arthritis (RA); (2) systematic review of previous ultrasound scoring systems of synovitis in RA; (3) enthesitis systematic review and Delphi definition exercise in spondyloarthritis enthesitis; (4) enthesitis intra...

NRC Fact-Finding Task Force report on the ATWS event at Salem Nuclear Generating Station, Unit 1, on February 25, 1983

International Nuclear Information System (INIS)

1983-03-01

An NRC Region I Task Force was established on March 1, 1983 to conduct fact finding and data collection with regard to the circumstances which led to an anticipated transient without scram (ATWS) event at the Public Service Electric and Gas Company's Salem Generating Station, Unit 1 on February 25, 1983. The charter of the Task Force was to determine the factual information pertinent to management and administrative controls which should have ensured proper operation of the reactor trip breakers in the solid state protection system. This report documents the findings of the Task Force along with its conclusions

Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

Energy Technology Data Exchange (ETDEWEB)

Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

1977-10-01

Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

Ontario gas prices review task force report : fairness at the pump

International Nuclear Information System (INIS)

2000-01-01

Sudden gas price increases hit Ontario consumers in July 1999, and as a result, the Gas Busters Hotline operated by the provincial government received over 4,000 complaints concerning the price of gas. World crude oil prices increased to above 34 American dollars per barrel by March 2000, and there were discrepancies by as much as 10 cents a litre in the price of gas in Ontario, depending on the community where the purchase was made. The Gas Prices Review Task Force was established in November 1999 to assist in the identification of an adequate solution to the rising price of gas. Public participation was sought, as well as input from representatives of consumer groups and industry. The Task Force was also mandated to conduct policy options research to ensure fair prices at the pump, to examine the regulatory or legislative initiatives that would work best for the protection of the consumer, in accordance with the federal Competition Act. A report was submitted to the Minister of Consumer and Commercial Relations. A total of fourteen recommendations were made to the Minister. The recommendations touched topics as varied as tax collection legislation, price monitoring, segmented earnings reports, removal of the Goods and Services Tax (GST). refs., figs

Report of the NASA lunar energy enterprise case study task force

International Nuclear Information System (INIS)

Anon.

1989-01-01

The Lunar Energy Enterprise Cast Study Task Force was formed to determine the economic viability and commercial business potential of mining and extracting He-3 from the lunar soil for use in earth-based fusion reactors. In addition, the Solar Power Satellite (SPS) and the Lunar Power Station (LPS) were also evaluated because they involve the use of lunar materials and could provide energy for lunar-based activities. The Task Force considered: (1) the legal and liability aspects of the space energy projects; (2) the long-range terrestrial energy needs and options; (3) the technical maturity of the three space energy projects; and (4) their commercial potential. The use of electricity is expected to increase, but emerging environmental concerns and resource availability suggest changes for the national energy policy. All three options have the potential to provide a nearly inexhaustible, clean source of electricity for the U.S. and worldwide, without major adverse impacts on the Earth's environment. Assumption by industry of the total responsibility for these energy projects is not yet possible. Pursuit of these energy concepts requires the combined efforts of government and industry. The report identifies key steps necessary for the development of these concepts and an evolving industrial role

One digit interruption: the altered force patterns during functionally cylindrical grasping tasks in patients with trigger digits.

Directory of Open Access Journals (Sweden)

Po-Tsun Chen

Full Text Available Most trigger digit (TD patients complain that they have problems using their hand in daily or occupational tasks due to single or multiple digits being affected. Unfortunately, clinicians do not know much about how this disease affects the subtle force coordination among digits during manipulation. Thus, this study examined the differences in force patterns during cylindrical grasp between TD and healthy subjects. Forty-two TD patients with single digit involvement were included and sorted into four groups based on the involved digits, including thumb, index, middle and ring fingers. Twelve healthy subjects volunteered as healthy controls. Two testing tasks, holding and drinking, were performed by natural grasping with minimal forces. The relations between the force of the thumb and each finger were examined by Pearson correlation coefficients. The force amount and contribution of each digit were compared between healthy controls and each TD group by the independent t test. The results showed all TD groups demonstrated altered correlation patterns of the thumb relative to each finger. Larger forces and higher contributions of the index finger were found during holding by patients with index finger involved, and also during drinking by patients with affected thumb and with affected middle finger. Although no triggering symptom occurred during grasping, the patients showed altered force patterns which may be related to the role of the affected digit in natural grasping function. In conclusion, even if only one digit was affected, the subtle force coordination of all the digits was altered during simple tasks among the TD patients. This study provides the information for the future studies to further comprehend the possible injuries secondary to the altered finger coordination and also to adopt suitable treatment strategies.

One digit interruption: the altered force patterns during functionally cylindrical grasping tasks in patients with trigger digits.

Science.gov (United States)

Chen, Po-Tsun; Lin, Chien-Ju; Jou, I-Ming; Chieh, Hsiao-Feng; Su, Fong-Chin; Kuo, Li-Chieh

2013-01-01

Most trigger digit (TD) patients complain that they have problems using their hand in daily or occupational tasks due to single or multiple digits being affected. Unfortunately, clinicians do not know much about how this disease affects the subtle force coordination among digits during manipulation. Thus, this study examined the differences in force patterns during cylindrical grasp between TD and healthy subjects. Forty-two TD patients with single digit involvement were included and sorted into four groups based on the involved digits, including thumb, index, middle and ring fingers. Twelve healthy subjects volunteered as healthy controls. Two testing tasks, holding and drinking, were performed by natural grasping with minimal forces. The relations between the force of the thumb and each finger were examined by Pearson correlation coefficients. The force amount and contribution of each digit were compared between healthy controls and each TD group by the independent t test. The results showed all TD groups demonstrated altered correlation patterns of the thumb relative to each finger. Larger forces and higher contributions of the index finger were found during holding by patients with index finger involved, and also during drinking by patients with affected thumb and with affected middle finger. Although no triggering symptom occurred during grasping, the patients showed altered force patterns which may be related to the role of the affected digit in natural grasping function. In conclusion, even if only one digit was affected, the subtle force coordination of all the digits was altered during simple tasks among the TD patients. This study provides the information for the future studies to further comprehend the possible injuries secondary to the altered finger coordination and also to adopt suitable treatment strategies.

Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6A, 6B and 6B2

International Nuclear Information System (INIS)

Hodgkinson, David; Black, John

2005-03-01

This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions

Methodological recommendations for cognition trials in bipolar disorder by the International Society for Bipolar Disorders Targeting Cognition Task Force

DEFF Research Database (Denmark)

Miskowiak, K W; Burdick, K E; Martinez-Aran, A

2017-01-01

OBJECTIVES: To aid the development of treatment for cognitive impairment in bipolar disorder, the International Society for Bipolar Disorders (ISBD) convened a task force to create a consensus-based guidance paper for the methodology and design of cognition trials in bipolar disorder. METHODS...... symptoms and concomitant medication. Task force recommendations are to: (i) enrich trials with objectively measured cognitively impaired patients; (ii) generally select a broad cognitive composite score as the primary outcome and a functional measure as a key secondary outcome; and (iii) include remitted...... of treatments to illness stage and using a multimodal approach. CONCLUSIONS: This ISBD task force guidance paper provides the first consensus-based recommendations for cognition trials in bipolar disorder. Adherence to these recommendations will likely improve the sensitivity in detecting treatment efficacy...

Quadriceps force and anterior tibial force occur obviously later than vertical ground reaction force: a simulation study

OpenAIRE

Ueno, Ryo; Ishida, Tomoya; Yamanaka, Masanori; Taniguchi, Shohei; Ikuta, Ryohei; Samukawa, Mina; Saito, Hiroshi; Tohyama, Harukazu

2017-01-01

Background: Although it is well known that quadriceps force generates anterior tibial force, it has been unclear whether quadriceps force causes great anterior tibial force during the early phase of a landing task. The purpose of the present study was to examine whether the quadriceps force induced great anterior tibial force during the early phase of a landing task. Methods: Fourteen young, healthy, female subjects performed a single-leg landing task. Muscle force and anterior tibial force w...

Quality assurance task force, an interagency cooperative approach to assess quality of environmental data

International Nuclear Information System (INIS)

Albin, L.M.; Mooney, R.R.; Erickson, J.L.; Conklin, A.W.

1990-01-01

In 1985, the Washington State Legislature charged the Department of Social and Health Services' Office of Radiation Protection with reviewing, evaluating and improving environmental monitoring programs within the state. Special emphasis was placed on the Hanford Site in Richland. Government and private organizations involved in monitoring radiation effects on the environment were asked to advise and support the State of Washington. Together, these organizations formed the Environmental Radiation Quality Assurance Task Force for the Pacific Northwest. Data on radiation levels are collected by the various organizations and compared. If findings are not consistent, the Task Force investigates and makes recommendations for long-term solutions. Thus, a system of checks and balances is created, enhancing the credibility of the various monitoring programs. Efficiency in use of resources is increased because overlap and duplication by different monitoring agencies are minimized

Responses to comments received on the draft final report of the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management

International Nuclear Information System (INIS)

1994-01-01

The Task Force solicited comments on its Draft Final Report from a variety of sources. Letters were sent to over 400 individuals who had expressed interest in the interest in the Department's radioactive waste, management programs, a notice was placed in the Federal Register, the morning session of the January 1993 meeting of the full Secretary of Energy Advisory Board was given over to discussion of the draft, and Task Force members and staff presented the effort at several professional meetings. Altogether 32 written comments were received. They are reproduced here, followed in each case by the Task Force's response to specific suggestions made to improve the draft. (The panel did not respond to comments that simply reflected policy preferences or that praised the group's effort.) With one exception, those specific suggestions are highlighted and given a letter designation from open-quotes Aclose quotes to open-quotes Zclose quotes. The Task Force's responses, written in the Fall 1993, are labeled in a like manner. For the one exception, a comments submitted by Judy Treichel, the Task Force's response is printed on copies of her annotated pages

The sandwich domain structure in a Fe-based amorphous ribbon with uniaxial magnetic anisotropy

International Nuclear Information System (INIS)

Zhmetko, D.N.; Matsura, A.V.; Troschenkov, Y.N.; Seidametov, S.V.

2011-01-01

The formation and motion of two domain walls parallel to the ribbon surface are discovered during its dynamic magnetic reversal. The domain walls form near by the middle plane of a ribbon and move to its opposite main surfaces with different velocities.

Synthesis of MoS{sub 2} ribbons and their branched structures by chemical vapor deposition in sulfur-enriched environment

Energy Technology Data Exchange (ETDEWEB)

Mahyavanshi, Rakesh D., E-mail: rmahyavanshi@gmail.com [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kalita, Golap, E-mail: kalita.golap@nitech.ac.jp [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Sharma, Kamal P. [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kondo, Masuharu; Dewa, Takeshita [Department of Life Science and Applied Chemistry, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kawahara, Toshio [Department of Electronics and Information Engineering, Chubu University, 1200 Matsumoto-cho, Kasugai 487-8501 (Japan); Tanemura, Masaki [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

2017-07-01

Highlights: • We demonstrate synthesis of monolayer MoS{sub 2} ribbons and their branched structures. • Unidirectional, bi and tri-directional growth of ribbons from the nucleation point are obtained. • Unidirectional and other branched structures can be synthesized controlling the composition of MoO{sub 3} and sulfur vapor. • The ribbons possess uneven edge structures with angles of 60° and 120°, indicating molybdenum and sulfur terminations. - Abstract: Here, we demonstrate the synthesis of monolayer molybdenum disulfide (MoS{sub 2}) ribbons and their branched structures by chemical vapor deposition (CVD) in sulfur-enriched environment. The growth of the MoS{sub 2} ribbons, triangular and other crystals significantly depends on the exposure of sulfur and concentration of molybdenum oxide (MoO{sub 3}) vapor on the substrate surface. The width and length of the synthesized ribbons is around 5–10 and 50–100 μm, respectively, where the width reduces from the nucleation point toward the end of the ribbon. Unidirectional, bi and tri-directional growth of ribbons from the nucleation point with an angle of 60° and 120° were obtained attributing to crystallographic growth orientation of MoS{sub 2} crystals. The directional growth of dichalcogenides ribbons is a significant challenge, our process shows that such unidirectional and other branched structures can be achieved by controlling the stoichiometric composition of MoO{sub 3} and sulfur exposure on the substrate surface. Interestingly, all the individual and branched ribbons possess uneven abundant edge structures, where the edges are formed with angles of 60° and 120°, indicating variation in molybdenum and sulfur edge terminations. The directional growth of MoS{sub 2} ribbons with defined edge structures in particular CVD condition can open up new possibilities for electronic and electrochemical applications.

38 CFR 21.9700 - Yellow Ribbon Program.

Science.gov (United States)

2010-07-01

... Yellow Ribbon Program and the student maintains satisfactory progress, conduct, and attendance according...) Based on student status (i.e. , undergraduate, graduate, doctoral), or (ii) For each subelement of the institution (i.e., college or professional school). The maximum amount specified for each subelement of the...

The American Psychological Association Task Force assessment of violent video games: Science in the service of public interest.

Science.gov (United States)

Calvert, Sandra L; Appelbaum, Mark; Dodge, Kenneth A; Graham, Sandra; Nagayama Hall, Gordon C; Hamby, Sherry; Fasig-Caldwell, Lauren G; Citkowicz, Martyna; Galloway, Daniel P; Hedges, Larry V

2017-01-01

A task force of experts was convened by the American Psychological Association (APA) to update the knowledge and policy about the impact of violent video game use on potential adverse outcomes. This APA Task Force on Media Violence examined the existing literature, including the meta-analyses in the field, since the last APA report on media violence in 2005. Because the most recent meta-analyses were published in 2010 and reflected work through 2009, the task force conducted a search of the published studies from 2009-2013. These recently published articles were scored and assessed by a systematic evidentiary review, followed by a meta-analysis of the high utility studies, as documented in the evidentiary review. Consistent with the literature that we reviewed, we found that violent video game exposure was associated with: an increased composite aggression score; increased aggressive behavior; increased aggressive cognitions; increased aggressive affect, increased desensitization, and decreased empathy; and increased physiological arousal. The size of the effects was similar to that in prior meta-analyses, suggesting a stable result. Our task force concluded that violent video game use is a risk factor for adverse outcomes, but found insufficient studies to examine any potential link between violent video game use and delinquency or criminal behavior. Our technical report is the basis of this article. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Controlling the microstructure and associated magnetic properties of Ni0.2Mn3.2Ga0.6 melt-spun ribbons by annealing

Directory of Open Access Journals (Sweden)

Mahmud Khan

2017-05-01

Full Text Available Here we report on the structural and magnetic properties of Ni0.2Mn3.2Ga0.6 melt-spun ribbons. The as-spun ribbons were found to exhibit mixed cubic phases that transform to non-cubic structure upon annealing. Additionally, an amorphous phase was found to co-exist in all ribbons. The SEM images show that minor grain formation occurs on the as-spun ribbons. However, the formation of extensive nano-grains was observed on the surfaces of the annealed ribbons. While the as-spun ribbons exhibit predominantly paramagnetic behavior, the ribbons annealed under various thermal conditions were found to be ferromagnetic with a Curie temperature of about 380 K. The ribbons annealed at 450 °C for 30 minutes exhibit a large coercive field of about 2500 Oe. The experimental results show that the microstructure and associated magnetic properties of the ribbons can be controlled by annealing techniques. The coercive fields and the shape of the magnetic hysteresis loops vary significantly with annealing conditions. Exchange bias effects have also been observed in the annealed ribbons.

ANALYSIS OF RIBBONING ON CONICAL YARN PACKAGE WOUND BY OPENEND SPINNING MACHINES

Directory of Open Access Journals (Sweden)

Resul FETTAHOV

2001-03-01

Full Text Available In this paper, Ribboning , one of the common faults in yarn packages, is mathematically analysed. If yarn is repeatly laid on top of or along the same path as the previously wound yarn, this duplication of yarn path on the package creates a defect known as ribboning. The number of turns of package (n per double traverse of yarn guide is calculated in two different way One is calculated the length of a coil on the package and total length of yarn in a double traverse; the other is considered transmission rate between drum and conical yarn package The result of two different approach is similar and the probable diameter of conical yarn package which ribboning is occurred is calculated and used on Schalafhorst-Autocore OE spinning machines.

Probabilistic information on object weight shapes force dynamics in a grip-lift task.

Science.gov (United States)

Trampenau, Leif; Kuhtz-Buschbeck, Johann P; van Eimeren, Thilo

2015-06-01

Advance information, such as object weight, size and texture, modifies predictive scaling of grip forces in a grip-lift task. Here, we examined the influence of probabilistic advance information about object weight. Fifteen healthy volunteers repeatedly grasped and lifted an object equipped with a force transducer between their thumb and index finger. Three clearly distinguishable object weights were used. Prior to each lift, the probabilities for the three object weights were given by a visual cue. We examined the effect of probabilistic pre-cues on grip and lift force dynamics. We expected predictive scaling of grip force parameters to follow predicted values calculated according to probabilistic contingencies of the cues. We observed that probabilistic cues systematically influenced peak grip and load force rates, as an index of predictive motor scaling. However, the effects of probabilistic cues on force rates were nonlinear, and anticipatory adaptations of the motor output generally seemed to overestimate high probabilities and underestimate low probabilities. These findings support the suggestion that anticipatory adaptations and force scaling of the motor system can integrate probabilistic information. However, probabilistic information seems to influence motor programs in a nonlinear fashion.

77 FR 71471 - Interagency Task Force on Veterans Small Business Development; Notice of Meeting

Science.gov (United States)

2012-11-30

... contracting opportunities; (3) Increase the integrity of certifications of status as a small business; (4... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development; Notice of Meeting AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency...

Orthogonal ribbons for suspending test masses in interferometric gravitational wave detectors

International Nuclear Information System (INIS)

Lee, B.H.; Ju, L.; Blair, D.G.

2005-01-01

We show that a simple modification of proposed ribbon suspensions for laser interferometric gravitational wave detectors can substantially reduce the amplitude of violin modes at the expense of a small deterioration of suspension thermal noise. Using low loss fused silica, large amplitude peaks which cause dynamic range problems can be reduced by 21 dB. The total number of horizontal longitudinal direction violin modes below 5 kHz is reduced to less than half that expected with conventional ribbon suspensions

Orthogonal ribbons for suspending test masses in interferometric gravitational wave detectors

Energy Technology Data Exchange (ETDEWEB)

Lee, B.H. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)]. E-mail: bhl@physics.uwa.edu.au; Ju, L. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia); Blair, D.G. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)

2005-05-23

We show that a simple modification of proposed ribbon suspensions for laser interferometric gravitational wave detectors can substantially reduce the amplitude of violin modes at the expense of a small deterioration of suspension thermal noise. Using low loss fused silica, large amplitude peaks which cause dynamic range problems can be reduced by 21 dB. The total number of horizontal longitudinal direction violin modes below 5 kHz is reduced to less than half that expected with conventional ribbon suspensions.

Modeling good research practices--overview: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--1.

Science.gov (United States)

Caro, J Jaime; Briggs, Andrew H; Siebert, Uwe; Kuntz, Karen M

2012-01-01

Models--mathematical frameworks that facilitate estimation of the consequences of health care decisions--have become essential tools for health technology assessment. Evolution of the methods since the first ISPOR Modeling Task Force reported in 2003 has led to a new Task Force, jointly convened with the Society for Medical Decision Making, and this series of seven articles presents the updated recommendations for best practices in conceptualizing models; implementing state-transition approaches, discrete event simulations, or dynamic transmission models; and dealing with uncertainty and validating and reporting models transparently. This overview article introduces the work of the Task Force, provides all the recommendations, and discusses some quandaries that require further elucidation. The audience for these articles includes those who build models, stakeholders who utilize their results, and, indeed, anyone concerned with the use of models to support decision making. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

American Association for Emergency Psychiatry Task Force on Medical Clearance of Adults

Directory of Open Access Journals (Sweden)

Eric L. Anderson

2017-02-01

Full Text Available Introduction: In the United States, the number of patients presenting to the emergency department (ED for a mental health concern is significant and expected to grow. The breadth of the medical evaluation of these patients is controversial. Attempts have been made to establish a standard evaluation for these patients, but to date no nationally accepted standards exist. A task force of the American Association of Emergency Psychiatry, consisting of physicians from emergency medicine and psychiatry, and a psychologist was convened to form consensus recommendations on the medical evaluation of psychiatric patients presenting to EDs. Methods: The task force reviewed existing literature on the topic of medical evaluation of psychiatric patients in the ED (Part I and then combined this with expert consensus (Part II. Results: In Part I, we discuss terminological issues and existing evidence on medical exams and laboratory studies of psychiatric patients in the ED. Conclusion: Emergency physicians should work cooperatively with psychiatric receiving facilities to decrease unnecessary testing while increasing the quality of medical screening exams for psychiatric patients who present to EDs. [West J Emerg Med. 2017;18(2235-242.

Analysis of stress-strain relationships in silicon ribbon

Science.gov (United States)

Dillon, O. W., Jr.

1984-01-01

An analysis of stress-strain relationships in silicon ribbon is presented. A model to present entire process, dynamical Transit Analysis is developed. It is found that knowledge of past-strain history is significant in modeling activities.

Gettering effects in RAD polysilicon ribbons: An XPS/AES study

Energy Technology Data Exchange (ETDEWEB)

Amarray, E.; Deville, J.P.; Quesada, J.

1987-03-01

Evidence for gettering effects during the various heat treatments applied to RAD ribbons were investigated with surface analysis methods. These heat treatments occur either during the burning-off process of the carbon support or during the POCl/sub 3/ diffusion, and transport metallic impurities near the surface of the sample. Oxidation of clean silicon surfaces, cleaved either in air or ultra-high vacuum, has shown that the same metallic impurities are brought near the surface by this treatment alone. It is thus suggested that controlled oxidations and heat treatments can be used to improve the electrical properties of polysilicon, and especially of ribbons.

Task Force on Catastrophic Antiphospholipid Syndrome (APS) and Non-criteria APS Manifestations (II): thrombocytopenia and skin manifestations.

Science.gov (United States)

Cervera, R; Tektonidou, M G; Espinosa, G; Cabral, A R; González, E B; Erkan, D; Vadya, S; Adrogué, H E; Solomon, M; Zandman-Goddard, G; Shoenfeld, Y

2011-02-01

The objectives of the 'Task Force on Catastrophic Antiphospholipid Syndrome (APS) and Non-criteria APS Manifestations' were to assess the clinical utility of the international consensus statement on classification criteria and treatment guidelines for the catastrophic APS, to identify and grade the studies that analyze the relationship between the antiphospholipid antibodies and the non-criteria APS manifestations, and to present the current evidence regarding the accuracy of these non-criteria APS manifestations for the detection of patients with APS. This article summarizes the studies analyzed on thrombocytopenia and skin manifestations, and presents the recommendations elaborated by the Task Force after this analysis.

Aespoe modelling task force - experiences of the site specific flow and transport modelling (in detailed and site scale)

Energy Technology Data Exchange (ETDEWEB)

Gustafson, Gunnar [Chalmers Univ. of Technology, Goeteborg (Sweden); Stroem, A.; Wikberg, P. [Swedish Nuclear Fuel and Waste Management Co. , Stockholm (Sweden)

1998-09-01

The Aespoe Task Force on modelling of groundwater flow and transport of solutes was initiated in 1992. The Task Force shall be a forum for the organisations supporting the Aespoe Hard Rock Laboratory Project to interact in the area of conceptual and numerical modelling of groundwater flow and solute transport in fractured rock. Much emphasis is put on building of confidence in the approaches and methods in use for modelling of groundwater flow and nuclide migration in order to demonstrate their use for performance and safety assessment. The modelling work within the Task Force is linked to the experiments performed at the Aespoe Laboratory. As the first Modelling Task, a large scale pumping and tracer experiment called LPT2 was chosen. This was the final part of the characterisation work for the Aespoe site before the construction of the laboratory in 1990. The construction of the Aespoe HRL access tunnel caused an even larger hydraulic disturbance on a much larger scale than that caused by the LPT2 pumping test. This was regarded as an interesting test case for the conceptual and numerical models of the Aespoe site developed during Task No 1, and was chosen as the third Modelling Task. The aim of Task 3 can be seen from two different perspectives. The Aespoe HRL project saw it as a test of their ability to define a conceptual and structural model of the site that can be utilised by independent modelling groups and be transformed to a predictive groundwater flow model. The modelling groups saw it as a means of understanding groundwater flow in a large fractured rock volume and of testing their computational tools. A general conclusion is that Task 3 has served these purposes well. Non-sorbing tracers tests, made as a part of the TRUE-experiments were chosen as the next predictive modelling task. A preliminary comparison between model predictions made by the Aespoe Task Force and the experimental results, shows that most modelling teams predicted breakthrough from

Investigation of force, contact area, and dwell time in finger-tapping tasks on membrane touch interface.

Science.gov (United States)

Liu, Na; Yu, Ruifeng

2018-06-01

This study aimed to determine the touch characteristics during tapping tasks on membrane touch interface and investigate the effects of posture and gender on touch characteristics variables. One hundred participants tapped digits displayed on a membrane touch interface on sitting and standing positions using all fingers of the dominant hand. Touch characteristics measures included average force, contact area, and dwell time. Across fingers and postures, males exerted larger force and contact area than females, but similar dwell time. Across genders and postures, thumb exerted the largest force and the force of the other four fingers showed no significant difference. The contact area of the thumb was the largest, whereas that of the little finger was the smallest; the dwell time of the thumb was the longest, whereas that of the middle finger was the shortest. Relationships among finger sizes, gender, posture and touch characteristics were proposed. The findings helped direct membrane touch interface design for digital and numerical control products from hardware and software perspectives. Practitioner Summary: This study measured force, contact area, and dwell time in tapping tasks on membrane touch interface and examined effects of gender and posture on force, contact area, and dwell time. The findings will direct membrane touch interface design for digital and numerical control products from hardware and software perspectives.

Two citizen task forces and the challenge of the evolving nuclear waste siting process

International Nuclear Information System (INIS)

Peelle, E.B.

1990-01-01

Siting any nuclear waste facility is problematic in today's climate of distrust toward nuclear agencies and fear of nuclear waste. This study compares and contrasts the siting and public participation processes as two citizen task forces dealt with their difficult responsibilities. 10 refs., 3 tabs

Summary of 21st joint EU-US transport task force workshop.

Czech Academy of Sciences Publication Activity Database

Mantica, P.; Bourdelle, C.; Camenen, Y.; Dejarnac, Renaud; Evans, T.; Görler, T.; Hillesheim, J.; Idomura, Y.; Jakubowski, M.; Ricci, P.; White, A.

2017-01-01

Roč. 57, č. 8 (2017), č. článku 087001. ISSN 0029-5515. [Joint EU-US Transport Task Force workshop/21./. Leysin, 05.09.2016-08.09.2016] EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : transport * confinement * turbulence Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 3.307, year: 2016 http://iopscience.iop.org/article/10.1088/1741-4326/aa753f/meta

Final Report: ATLAS Phase-2 Tracker Upgrade Layout Task Force

CERN Document Server

Clark, A; The ATLAS collaboration; Hessey, N; Mättig, P; Styles, N; Wells, P; Burdin, S; Cornelissen, T; Todorov, T; Vankov, P; Watson, I; Wenig, S

2012-01-01

he mandate of the Upgrade Layout Task Force was to develop a benchmark layout proposal for the ATLAS Phase-2 Upgrade Letter of Intent (LOI), due in late 2012. The work described in this note has evolved from simulation and design studies made using an earlier "UTOPIA" upgrade tracker layout, and experience gained from the current ATLAS Inner Detector during the first years of data taking. The layout described in this document, called the LoI-layout, will be used as a benchmark layout for the LoI and will be used for simulation and engineering studies described in the LoI.

Variation of magnetic properties with mischmetal content in the resource saving magnets of MM-Fe-B ribbons

Energy Technology Data Exchange (ETDEWEB)

Li, Zhu-bai, E-mail: lzbgj@163.com [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang, Li-chen [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Geng, Xiao-peng [Inner Mongolia Baotou Steel Rare Earth Magnetic Materials Co.Ltd, Baotou 014030 (China); Hu, Feng-xia; Sun, Ji-rong; Shen, Bao-gen [State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

2017-03-15

Magnetic materials of MM-Fe-B (MM=mischmetal) ribbons were prepared using melt spinning method by varying the content of MM. The ribbons contain minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. X-ray techniques show that the diffraction peak intensities of the minor phase Fe{sub 3}B vary with the content of constituent elements, indicating that the amount of minor phase could be tunable. The squareness of hysteresis loop is the best in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, which should mainly ascribe to the less amount of minor phase. Henkel plots verify the more uniform magnetization reversals in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, and the energy product achieves to the maximum of 12.74 MGOe with the coercivity of 6.50 kOe. With the increase of MM content the coercivity increases monotonically, and reaches to 9.13 kOe in MM{sub 15}Fe{sub 77.5}B{sub 7.5} ribbons, which should be related with the nature of the defects in the main phase. These investigations show that optimizing the content of constituent elements and phase constitution could improve magnetic properties in the resource-saving magnets of MM-Fe-B ribbons. - Highlights: • MM-Fe-B (MM=mischmetal) ribbons contains the minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. • The amount of minor phases varies with the content of constituent elements. • The energy product of 12.74 MGOe is obtained in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons by optimizing the phase constitution.

A task force model for statewide change in nursing education: building quality and safety.

Science.gov (United States)

Mundt, Mary H; Clark, Margherita Procaccini; Klemczak, Jeanette Wrona

2013-01-01

The purpose of this article was to describe a statewide planning process to transform nursing education in Michigan to improve quality and safety of patient care. A task force model was used to engage diverse partners in issue identification, consensus building, and recommendations. An example of a statewide intervention in nursing education and practice that was executed was the Michigan Quality and Safety in Nursing Education Institute, which was held using an integrated approach to academic-practice partners from all state regions. This paper describes the unique advantage of leadership by the Michigan Chief Nurse Executive, the existence of a nursing strategic plan, and a funding model. An overview of the Task Force on Nursing Education is presented with a focus on the model's 10 process steps and resulting seven recommendations. The Michigan Nurse Education Council was established to implement the recommendations that included quality and safety. Copyright © 2013 Elsevier Inc. All rights reserved.

Device for investigation of magnetic flux jumps in ribbon superconductors

International Nuclear Information System (INIS)

Andrianov, A.V.; Bashkirov, Yu.A.; Kremlev, M.G.

1986-01-01

A device for simulation of magnetic flux jumps in superconductors of conducting magnet sandwich-type windings super-applyed of a ribbon conductor is described. A superconducting magnet with a measuring cassetter are the main elements of the device. An external magnetic field is generated by a two-sectional superconducting magnet permitting to simulate the shape of the magnetic field characteristic for sandwich-type windings. Maximum radial component of the magnetic field is 2 T. Jumps of the magnetic flux are recorded by induction transducers and the magnetic field-by Hall trasducer. The effect of coating of standard metal on magnetic flux jumps in Nb 3 Sn base superconducting ribbon is considered

DOD Task Force for Business and Stability Operations in Afghanistan: Review of Selected Expenditures Highlights Serious Management and Oversight Problems

Science.gov (United States)

2016-04-15

execute projects and programs, but rather to advise DOD entities on ways to improve contracting processes and procedures. The memorandum establishing the...Task Force stated, “The Task Force will not be responsible for contracting, but will advise existing DoD contracting offices on improved...including the fact that the AGS did not appear to screen the trainees it nominated , resulting in the majority of the trainees being functionally

Use of intraventricular ribbon gauze to reduce particulate emboli during aortic valve replacement

Directory of Open Access Journals (Sweden)

Loubani Mahmoud

2006-11-01

Full Text Available Abstract Background The incidence of cerebrovascular accidents following aortic valve surgery remains a devastating complication. The aim of this study was to determine the number of potential embolic material arising during aortic valve replacement and to examine the efficacy of using ribbon gauze in the left ventricle during removal of the native valve and decalcification of the aortic annulus. Methods Ribbon gauze was inserted into the left ventricular cavity prior to aortic valve excision in an unselected, prospectively studied series of 30 patients undergoing aortic valve replacement. A further 30 lengths of ribbon gauze were soaked in the pericardiotomy blood of the same patients and all were subjected to histological analysis. Results The median number of tissue fragments from the aortic valve replacement group was significantly higher than in the control group 5 (0–18 versus 0 (0–1 (p = 3.6 × 10-5. The size of tissue fragments varied between 0.1 and 9.0 mm with a mean of 0.61 ± 1.12 mm and a median of 0.2 mm. There was a significantly higher number of tissue fragments associated with patients having surgery for aortic stenosis when compared with patients who had aortic regurgitation with median of 5 (0–18 versus 0 (0–3 (p = 0.8 × 10-3. Conclusion Significant capture of particulate debris by the intraventricular ribbon gauze suggests that the technique of left ventricular ribbon gauze insertion during aortic valve excision has merit.

Properties of rapidly solidified Fe-Cr-Al ribbons for the use as automotive exhaust gas catalyst substrates

International Nuclear Information System (INIS)

Emmerich, K.

1993-01-01

Metallic honeycomb structures are used as catalyst substrates in automotive exhaust gas systems. This application requires an outstanding corrosion resistance at elevated temperatures of the substrate material. Technical improvements can be achieved by the use of rapid solidification technology for the production of the Fe-Cr-Al ribbons since the Al content can be substantially increased from about 5% Al in the conventionally rolled material to about 12% Al in the rapid solidified ribbon. As a result the lifetime of the ribbon in a higher-temperature corrosion environment is drastically increased. In addition the scale/metal adherance is improved. The impediment of recrystallization in the rapidly solidified ribbons prevents an embrittlement even in carbonizing atmospheres. (orig.)

Eosinophilic granulomatosis with polyangiitis (Churg-Strauss) (EGPA) Consensus Task Force recommendations for evaluation and management

NARCIS (Netherlands)

Groh, Matthieu; Pagnoux, Christian; Baldini, Chiara; Bel, Elisabeth; Bottero, Paolo; Cottin, Vincent; Dalhoff, Klaus; Dunogué, Bertrand; Gross, Wolfgang; Holle, Julia; Humbert, Marc; Jayne, David; Jennette, J. Charles; Lazor, Romain; Mahr, Alfred; Merkel, Peter A.; Mouthon, Luc; Sinico, Renato Alberto; Specks, Ulrich; Vaglio, Augusto; Wechsler, Michael E.; Cordier, Jean-François; Guillevin, Loïc

2015-01-01

To develop disease-specific recommendations for the diagnosis and management of eosinophilic granulomatosis with polyangiitis (Churg-Strauss syndrome) (EGPA). The EGPA Consensus Task Force experts comprised 8 pulmonologists, 6 internists, 4 rheumatologists, 3 nephrologists, 1 pathologist and 1

Timing and extent of finger force enslaving during a dynamic force task cannot be explained by EMG activity patterns.

Directory of Open Access Journals (Sweden)

Mojtaba Mirakhorlo

Full Text Available Finger enslaving is defined as the inability of the fingers to move or to produce force independently. Such finger enslaving has predominantly been investigated for isometric force tasks. The aim of this study was to assess whether the extent of force enslaving is dependent on relative finger movements. Ten right-handed subjects (22-30 years flexed the index finger while counteracting constant resistance forces (4, 6 and 8 N orthogonal to the fingertip. The other, non-instructed fingers were held in extension. EMG activities of the mm. flexor digitorum superficialis (FDS and extensor digitorum (ED in the regions corresponding to the index, middle and ring fingers were measured. Forces exerted by the non-instructed fingers increased substantially (by 0.2 to 1.4 N with flexion of the index finger, increasing the enslaving effect with respect to the static, pre-movement phase. Such changes in force were found 260-370 ms after the initiation of index flexion. The estimated MCP joint angle of the index finger at which forces exerted by the non-instructed fingers started to increase varied between 4° and 6°. In contrast to the finger forces, no significant changes in EMG activity of the FDS regions corresponding to the non-instructed fingers upon index finger flexion were found. This mismatch between forces and EMG of the non-instructed fingers, as well as the delay in force development are in agreement with connective tissue linkages being slack when the positions of the fingers are similar, but pulled taut when one finger moves relative to the others. Although neural factors cannot be excluded, our results suggest that mechanical connections between muscle-tendon structures were (at least partly responsible for the observed increase in force enslaving during index finger flexion.

Structural relaxation of Ni-Si-B amorphous ribbon

NARCIS (Netherlands)

Jurikova, A.; Csach, K.; Miskuf, J.; Ocelik, V.

The structural relaxation of the Ni-Si-B amorphous ribbon was studied by means of differential scanning calorimetry and thermomechanical analysis. It was shown that considerable length changes associated with reversible structural relaxation were revealed after a previous creep applied at higher

Variation of boron concentration in metallic glass ribbons

International Nuclear Information System (INIS)

Nagy, A.Z.; Vasvari, B.; Duwez, P.; Bakos, L.; Seres, Z.; Bogancs, J.; Nazarov, V.M.

1979-12-01

The surface boron concentration of Fe 40 Ni 40 P 14 B 6 , Fe 32 Ni 36 Cr 14 P 12 B 6 and Fe 40 Ni 40 B 20 metallic glasses was measured by neutron activation analysis on both sides of the ribbon samples. It was found that the boron concentration is always higher at the bright side of the ribbon than that at the dull side which is in contact with the cold surface of the wheel during the rapid quenching from the melt. A possible explanation is given in terms of the solid-liquid interface moving rapidly from the cooled surface to the free surface when preparing the samples. Range values of alpha-particles for some characteristic compositions of metallic glasses are tabulated. A mathematical technique for the deconvolution of experimental data is described and the listing of the Fortran program is enclosed. (author)

Influence of Force and Torque Feedback on Operator Performance in a VR-Based Suturing Task

Directory of Open Access Journals (Sweden)

L. Santos-Carreras

2010-01-01

Full Text Available The introduction of Minimally Invasive Surgery (MIS has revolutionised surgical care, considerably improving the quality of many surgical procedures. Technological advances, particularly in robotic surgery systems, have reduced the complexity of such an approach, paving the way for even less invasive surgical trends. However, the fact that haptic feedback has been progressively lost through this transition is an issue that to date has not been solved. Whereas traditional open surgery provides full haptic feedback, the introduction of MIS has eliminated the possibility of direct palpation and tactile exploration. Nevertheless, these procedures still provide a certain amount of force feedback through the rigid laparoscopic tool. Many of the current telemanipulated robotic surgical systems in return do not provide full haptic feedback, which to a certain extent can be explained by the requirement of force sensors integrated into the tools of the slave robot and actuators in the surgeon’s master console. In view of the increased complexity and cost, the benefit of haptic feedback is open to dispute. Nevertheless, studies have shown the importance of haptic feedback, especially when visual feedback is unreliable or absent. In order to explore the importance of haptic feedback for the surgeon’s master console of a novel teleoperated robotic surgical system, we have identified a typical surgical task where performance could potentially be improved by haptic feedback, and investigate performance with and without this feedback. Two rounds of experiments are performed with 10 subjects, six of them with a medical background. Results show that feedback conditions, including force feedback, significantly improve task performance independently of the operator’s suturing experience. There is, however, no further significant improvement when torque feedback is added. Consequently, it is deduced that force feedback in translations improves subject�

Proposal for the establishment of an emergency radioactive waste task force in Brazil

International Nuclear Information System (INIS)

Tello, C.C.O.; Silva, E.M.P.; Prado, M.A.S.

1998-01-01

A radioactive waste task force set up specifically for emergency situations would act immediately following the report of a radiological accident in order to avoid or minimize the possible radioactive waste arising from these situations. The aims of this group of specialists would be to alleviate the environmental, economical, and social impacts imposed by these situations on present and future generations. (author)

Space station operations task force. Panel 3 report: User development and integration

Science.gov (United States)

1987-01-01

The User Development and Integration Panel of the Space Station Operations Task Force was chartered to develop concepts relating to the operations of the Space Station manned base and the platforms, user accommodation and integration activities. The needs of the user community are addressed in the context with the mature operations phase of the Space Station. Issues addressed include space station pricing options, marketing strategies, payload selection and resource allocation options, and manifesting techniques.

Methodological recommendations for cognition trials in bipolar disorder by the International Society for Bipolar Disorders Targeting Cognition Task Force

DEFF Research Database (Denmark)

Miskowiak, K W; Burdick, K E; Martinez-Aran, A

2017-01-01

OBJECTIVES: To aid the development of treatment for cognitive impairment in bipolar disorder, the International Society for Bipolar Disorders (ISBD) convened a task force to create a consensus-based guidance paper for the methodology and design of cognition trials in bipolar disorder. METHODS...... of treatments to illness stage and using a multimodal approach. CONCLUSIONS: This ISBD task force guidance paper provides the first consensus-based recommendations for cognition trials in bipolar disorder. Adherence to these recommendations will likely improve the sensitivity in detecting treatment efficacy...

Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

Energy Technology Data Exchange (ETDEWEB)

Sánchez Llamazares, J. L., E-mail: jose.sanchez@ipicyt.edu.mx; Flores-Zúñiga, H.; Sánchez-Valdés, C. F. [Instituto Potosino de Investigación Científica y Tecnológica A.C., Camino a la Presa San José 2055 Col. Lomas 4" a, San Luis Potosí, S.L.P. 78216 (Mexico); Álvarez-Alonso, Pablo [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); Lara Rodríguez, G. A. [Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito Exterior s/n, Ciudad Universitaria, México, D. F. 04510 (Mexico); Fernández-Gubieda, M. L. [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); BC Materials, Camino de Ibaizabal, Edificio 500, Planta 1, Parque Científico y Tecnológico de Zamudio, 48160 Derio (Spain)

2015-05-07

The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

The OMERACT ultrasound task force -- Advances and priorities.

LENUS (Irish Health Repository)

D'Agostino, Maria-Antonietta

2009-08-01

This article reports the most recent work of the OMERACT Ultrasound Task Force (post OMERACT 8) and highlights of future research priorities discussed at the OMERACT 9 meeting, Kananaskis, Canada, May 2008. Results of 3 studies were presented: (1) assessing intermachine reliability; (2) applying the scoring system developed in the hand to other joints most commonly affected in rheumatoid arthritis (RA); and (3) assessing interobserver reliability on a deep target joint (shoulder). Results demonstrated good intermachine reliability between multiple examiners, and good applicability of the scoring system for the hand on other joints (including shoulder). Study conclusions were discussed and a future research agenda was generated, notably the further development of a Global OMERACT Sonography Scoring (GLOSS) system in RA, emphasizing the importance of testing feasibility and added value over standard clinical variables. Future disease areas of importance to develop include a scoring system for enthesitis and osteoarthritis.

Temperature dependent evolution of wrinkled single-crystal silicon ribbons on shape memory polymers.

Science.gov (United States)

Wang, Yu; Yu, Kai; Qi, H Jerry; Xiao, Jianliang

2017-10-25

Shape memory polymers (SMPs) can remember two or more distinct shapes, and thus can have a lot of potential applications. This paper presents combined experimental and theoretical studies on the wrinkling of single-crystal Si ribbons on SMPs and the temperature dependent evolution. Using the shape memory effect of heat responsive SMPs, this study provides a method to build wavy forms of single-crystal silicon thin films on top of SMP substrates. Silicon ribbons obtained from a Si-on-insulator (SOI) wafer are released and transferred onto the surface of programmed SMPs. Then such bilayer systems are recovered at different temperatures, yielding well-defined, wavy profiles of Si ribbons. The wavy profiles are shown to evolve with time, and the evolution behavior strongly depends on the recovery temperature. At relatively low recovery temperatures, both wrinkle wavelength and amplitude increase with time as evolution progresses. Finite element analysis (FEA) accounting for the thermomechanical behavior of SMPs is conducted to study the wrinkling of Si ribbons on SMPs, which shows good agreement with experiment. Merging of wrinkles is observed in FEA, which could explain the increase of wrinkle wavelength observed in the experiment. This study can have important implications for smart stretchable electronics, wrinkling mechanics, stimuli-responsive surface engineering, and advanced manufacturing.

Mn-silicide nanostructures aligned on massively parallel silicon nano-ribbons

International Nuclear Information System (INIS)

De Padova, Paola; Ottaviani, Carlo; Ronci, Fabio; Colonna, Stefano; Quaresima, Claudio; Cricenti, Antonio; Olivieri, Bruno; Dávila, Maria E; Hennies, Franz; Pietzsch, Annette; Shariati, Nina; Le Lay, Guy

2013-01-01

The growth of Mn nanostructures on a 1D grating of silicon nano-ribbons is investigated at atomic scale by means of scanning tunneling microscopy, low energy electron diffraction and core level photoelectron spectroscopy. The grating of silicon nano-ribbons represents an atomic scale template that can be used in a surface-driven route to control the combination of Si with Mn in the development of novel materials for spintronics devices. The Mn atoms show a preferential adsorption site on silicon atoms, forming one-dimensional nanostructures. They are parallel oriented with respect to the surface Si array, which probably predetermines the diffusion pathways of the Mn atoms during the process of nanostructure formation.

Test results of Nb3Sn ribbons for the Princeton D coil test program

International Nuclear Information System (INIS)

Kaugerts, J.; File, J.; Willard, J.W.

1974-10-01

A previously described D coil test program was modified. Details of a smaller Nb 3 Sn D coil test program are described. Cusp coil tests were made with several Nb 3 Sn composite ribbons. Measurements of both the quench and recovery currents as a function of magnetic field component perpendicular to the wide edge of the ribbon are presented. (auth)

Blue Ribbon Commission, Yucca Mountain Closure, Court Actions - Future of Decommissioned Reactors, Operating Reactors and Nuclear Power - 13249

International Nuclear Information System (INIS)

Devgun, Jas S.

2013-01-01

Issues related to back-end of the nuclear fuel cycle continue to be difficult for the commercial nuclear power industry and for the decision makers at the national and international level. In the US, the 1982 NWPA required DOE to develop geological repositories for SNF and HLW but in spite of extensive site characterization efforts and over ten billion dollars spent, a repository opening is nowhere in sight. There has been constant litigation against the DOE by the nuclear utilities for breach of the 'standard contract' they signed with the DOE under the NWPA. The SNF inventory continues to rise both in the US and globally and the nuclear industry has turned to dry storage facilities at reactor locations. In US, the Blue Ribbon Commission on America's Nuclear Future issued its report in January 2012 and among other items, it recommends a new, consent-based approach to siting of facilities, prompt efforts to develop one or more geologic disposal facilities, and prompt efforts to develop one or more consolidated storage facilities. In addition, the March 2011 Fukushima Daiichi accident had a severe impact on the future growth of nuclear power. The nuclear industry is focusing on mitigation strategies for beyond design basis events and in the US, the industry is in the process of implementing the recommendations from NRC's Near Term Task Force. (authors)

Large Area Silicon Sheet by EFG. [quality control and productivity of edge-defined film-fed growth of ribbons

Science.gov (United States)

1979-01-01

Influences on ribbon quality which might be caused by various materials of construction which are used in the growth furnace were assessed. At the present level of ribbon quality, which has produced 8.5% to 9.5% efficient solar cells, no particular influence of any furnace part was detected. The experiments led to the suspicion that the general environment and the somewhat unoptimized materials handling procedures might be responsible for the current variations in ribbon quality and that, therefore, continuous work with this furnace under rather more stringent environmental conditions and operating procedures could perhaps improve materials quality to some extent. The work on the multiple furnace was continued with two multiple growth runs being performed. In these runs, the melt replenishment system performed poorly and extensive modifications to it were designed to make reliable melt feeding for five ribbon growth possible. Additional characterization techniques for wide ribbons, stress measurements, and growth dynamics experiments are reported.

Characterisation of melt spun Ni-Ti shape memory Ribbons' microstructure

Science.gov (United States)

Mehrabi, Kambiz; Brunčko, Mihael; Kneissl, Albert C.; Čolič, Miodrag; Stamenković, Dragoslav; Ferčec, Janko; Anžel, Ivan; Rudolf, Rebeka

2012-06-01

NiTi alloys are the most technologically important medical Shape Memory Alloys in a wide range of applications used in Orthopaedics, Neurology, Cardiology and interventional Radiology as guide-wires, self-expandable stents, stent grafts, inferior vena cava filters and clinical instruments. This paper discusses the use of rapid solidification by the melt spinning method for the preparation of thin NiTi ribbons for medical uses. Generally, the application of rapid solidification via melt-spinning can change the microstructure drastically, which improves ductility and shape memory characteristics and leads to samples with small dimensions. As the increase in the wheel speed led to a reduced ribbon thickness, the cooling rate increased and, therefore, the martensitic substructure became finer. Furthermore, no transition from the crystalline phase to the amorphous phase was obtained by increasing the cooling rate, even at a wheel speed of 30 m/s. Specimens for our metallographic investigation were cut from the longitudinal cross sections of melt-spun ribbons. Conventional TEM studies were carried out with an acceleration voltage of 120 kV. Additionally, the chemical composition of the samples was examined with a TEM equipped with an EDX analyser. The crystallographic structure was determined using Bragg-Brentano x-ray diffraction with Cu-Kα radiation at room temperature.

Transverse magnetization and giant magnetoimpedance in amorphous ribbons

International Nuclear Information System (INIS)

Orue, I.; Garcia-Arribas, A.; Saad, A.; Cos, D. de; Barandiaran, J.M.

2005-01-01

In the classical approach giant magnetoimpedance (GMI) is driven by the transverse permeability of the sample, as excited by the current flowing through it. Transverse permeability is usually taken as a constant, while detailed magnetization processes are important for the interpretation of GMI data. In most cases the transverse permeability (or magnetization) is only guessed by looking at the longitudinal magnetization curve and direct determinations of such parameter are scarce in the literature. In this work we report on the operation of a simple setup which provides the transverse magnetization of amorphous ribbons as a function of the current intensity flowing through it, by means of the magnetooptical kerr effect (MOKE). The system has been tested on low magnetostriction amorphous ribbons of very soft character with both longitudinal and transverse anisotropy. The transverse magnetization as a function of both the current and a DC longitudinal field applied, was compared with magneto impedance measurements

Capillary origami: superhydrophobic ribbon surfaces and liquid marbles

Directory of Open Access Journals (Sweden)

Glen McHale

2011-03-01

Full Text Available In the wetting of a solid by a liquid it is often assumed that the substrate is rigid. However, for an elastic substrate the rigidity depends on the cube of its thickness and so reduces rapidly as the substrate becomes thinner as it approaches becoming a thin sheet. In such circumstances, it has been shown that the capillary forces caused by a contacting droplet of a liquid can shape the solid rather than the solid shaping the liquid. A substrate can be bent and folded as a (pinned droplet evaporates or even instantaneously and spontaneously wrapped on contact with a droplet. When this effect is used to create three dimensional shapes from initially flat sheets, the effect is called capillary origami or droplet wrapping.In this work, we consider how the conditions for the spontaneous, capillary induced, folding of a thin ribbon substrate might be altered by a rigid surface structure that, for a rigid substrate, would be expected to create Cassie–Baxter and Wenzel effects. For smooth thin substrates, droplet wrapping can occur for all liquids, including those for which the Young’s law contact angle (defined by the interfacial tensions is greater than 90° and which would therefore normally be considered relatively hydrophobic. However, consideration of the balance between bending and interfacial energies suggests that the tendency for droplet wrapping can be suppressed for some liquids by providing the flexible solid surface with a rigid topographic structure. In general, it is known that when a liquid interacts with such a structure it can either fully penetrate the structure (the Wenzel case or it can bridge between the asperities of the structure (the Cassie–Baxter case.In this report, we show theoretically that droplet wrapping should occur with both types of solid–liquid contact. We also derive a condition for the transition between the Cassie–Baxter and Wenzel type droplet wrapping and relate it to the same transition condition

Changes in ground reaction force during a rebound-jump task after hip strength training for single-sided ankle dorsiflexion restriction.

Science.gov (United States)

Kondo, Hitoshi; Someya, Fujiko

2016-01-01

[Purpose] Lateral ankle sprains are common injuries suffered while playing sports, and abnormal forward- and inward-directed ground reaction force occurs during a jumping task. However, the influence of hip muscle strength training on jumping performance after ankle injuries has not been fully examined. This study thus examined changes in ground reaction force during a rebound-jump task after training to strengthen hip muscles. [Subjects and Methods] Ten of 30 female high school basketball players were assigned as subjects who showed a difference of 7 or more degrees in dorsiflexion ranges between the bilateral ankles. The subjects underwent 12 weeks of training to strengthen hip abductors and external rotators. Comparisons between before and after training were made regarding ground reaction force components, hip and knee joint angles, percentage of maximum voluntary contraction in leg muscles, and muscle strength of hip muscles during the rebound-jump task. [Results] After training, the subjects showed increased strength of external rotator muscles, increased percentage of maximum voluntary contraction in the gluteus medius muscle, decreased inward ground reaction force, and increased flexion angles of the hip and knee joints. [Conclusion] This study suggests that training to strengthen hip muscles may ameliorate the inward ground reaction force in athletes with ankle dorsiflexion restriction.

Million Hearts 2022: Understanding the Links between Environmental Pollutant Exposure and Cardiovascular and Cerebrovascular Events - Justus-Warren Heart Disease and Stroke Prevention Task Force

Science.gov (United States)

The webinar was requested by the Justus-Warren Heart Disease and Stroke Prevention Task Force. From their website, “The task force was established in 1995 in North Carolina to provide statewide leadership for the prevention and management of cardiovascular disease. Meetings are...

Cold Lake-Beaver River water management study update: Report of the Cold Lake Regional Water Management Task Force

International Nuclear Information System (INIS)

1994-01-01

The Cold Lake Regional Water Management Task Force was formed in 1992, comprising representatives from local governments, aboriginal groups, the oil industry, and the public. The Task Force's mandate was to advise Alberta Environmental Protection on updating the Cold Lake-Beaver River Water Management Plan, taking into acocunt the views and concerns of the public, industry, and local governments. Industrial water use was found to be the key issue to be addressed in the plan update, so the Task Force focused on reviewing industrial water supply options and developing recommendations on the appropriate water supply to meet long-term requirements. A subcommittee was established to monitor groundwater use by the heavy oil industry. This committee took readings at Imperial Oil's water production and observation wells on a biweekly basis. Nine options for supplying industrial water requirements were examined and evaluated using criteria including supply reliability, economic factors, and impacts on other users and the environment. The Task Force found that the preferred source of water for industrial use is the North Saskatchewan River, to be accessed by a water pipeline. The second and less desirable source of water for industrial use would be a system of weirs on Cold or Primrose Lakes and Wolf Lake, supplemented by the use of brackish water to the maximum extent possible. In the interim, industry was recommended to maximize its use of brackish water and continue to use surface and ground water within existing license limits. Other recommendations were to form provincial or regional boards to oversee water use and issue water licenses, to treat water as a resource, and to establish a fee for industrial use of water. 3 figs., 5 tabs

Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Task 6C

International Nuclear Information System (INIS)

Black, John; Hodgkinson, David

2005-03-01

This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization (SC) and performance assessment (PA) approaches to solute transport in fractured rock. The present report is concerned solely with Task 6C, which relates to the construction and parametrisation of a block-scale hydrostructural model of the TRUE Block Scale region of the Aespoe Hard Rock laboratory. The task objectives, specifications and outcome are summarised and reviewed. Also, consideration is given to how the hydrostructural model might affect the outcomes of Task 6D and 6E. The main conclusions of this review are summarised below: The Task 6C hydrostructural model is a more comprehensive approach to quantitatively describing a volume of fractured rock than has been achieved hitherto. The idea of including solute retention characteristics as indices attached to individual fractures is an efficient device resulting in a whole volume of fractured rock described by a few spreadsheets. The hydrostructural model is clearly defined and provides a useful test bed for Tasks 6D and 6E. It would have been beneficial if the specifications for Task 6C had been more clearly defined as a hierarchy of requirements, and performance measures had been defined and evaluated to allow comparison of alternative approaches. The device used to reduce connectivity, namely reducing the average size of background fractures, has the effect of producing a final model with an 'unnatural' gap in the overall distribution of fracture sizes. It appears that the exploratory boreholes could be important conductive structures within the region of the 200 m block even though they are segmented into shorter sections by packers. If correct, this implies that the boreholes should be included explicitly in the model if close replication of TRUE Block

Magnetoimpedance studies on urine treated Co{sub 66}Ni{sub 7}Si{sub 7}B{sub 20} ribbons

Energy Technology Data Exchange (ETDEWEB)

Kotagiri, Ganesh [Advanced Magnetic Materials Laboratory, Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India); Markandeyulu, G., E-mail: mark@iitm.ac.in [Advanced Magnetic Materials Laboratory, Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India); Doble, Mukesh; Nandakumar, V. [Department of Biotechnology, Indian Institute of Technology Madras, Chennai 600036 (India)

2015-11-15

Magnetoimpedance (MI) response of Co{sub 66}Ni{sub 7}Si{sub 7}B{sub 20} ribbons treated with artificial urine with protein bovine serum albumin (BSA), artificial urine without protein BSA and healthy male urine was studied as a function of time of incubation. The maximum MI [(MI){sub m}] values of the ribbons treated with artificial urine without protein (RTAU) after 3 h, 6 h, 12 h and 24 h of incubation are 30% (at 4 MHz), 15% (at 5 MHz), 14% (at 10 MHz) and 8% (at 13 MHz) respectively. On the other hand, the respective (MI){sub m} values of the ribbons treated with artificial urine with protein (RTAUP) are 33% (at 4 MHz), 25% (at 5 MHz), 20% (at 8 MHz) and 15% (12 MHz). However (MI){sub m} values of the ribbons treated with healthy male urine (RTHMU) after 4 h, 5 h, 10 h and 15 h of incubation are 71% (at 3 MHz), 57% (at 3 MHz), 25% (at 6 MHz) and 25% (at 5 MHz), respectively. The saturation magnetization (M{sub s}) values of RTAU after 3 h, 6 h, 12 h and 24 h of incubation are 71 emu/g, 65 emu/g, 63 emu/g and 60 emu/g respectively whereas, the respective M{sub s} values of RTAUP are 73 emu/g, 69 emu/g, 67 emu/g and 64 emu/g. The M{sub s} values of RTHMU after 4 h, 5 h, 10 h and 15 h of incubation are 96 emu/g, 90 emu/g, 75 emu/g and 75 emu/g respectively. The decrease in M{sub s} and (MI){sub m} values in RTAU and RTAUP compared to as-quenched ribbon is related to the amounts of various elements etched out from the ribbons and increased surface roughness. The M{sub s} and (MI){sub m} values of RTHMU are seen to have increased after 4 h and 5 h of incubation, due to strain relaxation through removal of strain developed during rapid quenching of the ribbons. On the other hand, the M{sub s} and (MI){sub m} values of RTHMU after 10 h and 15 h have decreased due to deterioration of the surface of the ribbons and thus, increase in magnetic (surface) anisotropy. The decrease in (MI){sub m} and M{sub S} of RTAU with the time of incubation are more rapid compared to that

2015 E-Truck Task Force: Key Barriers Affecting E-Truck Adoption, Industry and Policy Implications, and Recommendations to Move the Market Forward

OpenAIRE

Brotherton, Tom; Gilde, Alycia; Tomic, Jasna

2016-01-01

CALSTART’s E-Truck Task Force (ETTF) produced a report outlining the markets for electric drive trucks (E-Trucks), the prime barriers facing their success and provided key findings and recommendations to support expanding E-Truck adoption. Four key findings have been identified by the E-Truck Task Force as barriers currently affecting the growth and viability of E-Truck sales

Report of the Defense Task Force on Sexual Harassment and Violence at the Military Service Academies

National Research Council Canada - National Science Library

2005-01-01

... Authorization Act for Fiscal Year 2004. Congress directed the Task Force to assess and make recommendations concerning how the Departments of the Army and the Navy may more effectively address sexual harassment and assault at the United...

International Society for Bipolar Disorders Task Force on Suicide

DEFF Research Database (Denmark)

Schaffer, Ayal; Isometsä, Erkki T; Tondo, Leonardo

2015-01-01

significantly associated with suicide attempts were: female gender, younger age at illness onset, depressive polarity of first illness episode, depressive polarity of current or most recent episode, comorbid anxiety disorder, any comorbid substance use disorder, alcohol use disorder, any illicit substance use......OBJECTIVES: Bipolar disorder is associated with a high risk of suicide attempts and suicide death. The main objective of the present study was to identify and quantify the demographic and clinical correlates of attempted and completed suicide in people with bipolar disorder. METHODS: Within...... the framework of the International Society for Bipolar Disorders Task Force on Suicide, a systematic review of articles published since 1980, characterized by the key terms bipolar disorder and 'suicide attempts' or 'suicide', was conducted, and data extracted for analysis from all eligible articles...

Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons

Directory of Open Access Journals (Sweden)

Zahra Jamili-Shirvan

2013-12-01

Full Text Available The nanocrystallization of Co67Fe4Cr7Si8B14 amorphous ribbons which prepared by planar flow melt spinning process (PFMS was investigated. Crystallization of the ribbons was studied by differential thermal analysis (DTA, X-ray diffraction (XRD and transmission electron microscopy (TEM. The DTA result of amorphous ribbon at heating rate of 10˚C/min showedoccurrence of phase transitions in two stages. The ribbons were isothermally annealed for 30 minutes in argon atmosphere at different temperatures between 300 and 650ºC with 25ºC steps. The magnetic properties of annealed samples were measured using a vibrating sample magnetometer (VSM. The VSM results revealed that optimum soft magnetic properties occurred at 400ºC. XRD patterns showed that the samples isothermally annealed up to 450ºC were amorphous, while TEM results at 400ºC indicated 7-8 nm mean size nanocrytallites in amorphous matrix and size of the nanocrystallites increased by increasing temperature. Also by X-ray diffraction pattern, precipitation of different phases at higher temperatures confirmed.

Overexpression of guanylate cyclase activating protein 2 in rod photoreceptors in vivo leads to morphological changes at the synaptic ribbon.

Directory of Open Access Journals (Sweden)

Natalia López-del Hoyo

Full Text Available Guanylate cyclase activating proteins are EF-hand containing proteins that confer calcium sensitivity to retinal guanylate cyclase at the outer segment discs of photoreceptor cells. By making the rate of cGMP synthesis dependent on the free intracellular calcium levels set by illumination, GCAPs play a fundamental role in the recovery of the light response and light adaptation. The main isoforms GCAP1 and GCAP2 also localize to the synaptic terminal, where their function is not known. Based on the reported interaction of GCAP2 with Ribeye, the major component of synaptic ribbons, it was proposed that GCAP2 could mediate the synaptic ribbon dynamic changes that happen in response to light. We here present a thorough ultrastructural analysis of rod synaptic terminals in loss-of-function (GCAP1/GCAP2 double knockout and gain-of-function (transgenic overexpression mouse models of GCAP2. Rod synaptic ribbons in GCAPs-/- mice did not differ from wildtype ribbons when mice were raised in constant darkness, indicating that GCAPs are not required for ribbon early assembly or maturation. Transgenic overexpression of GCAP2 in rods led to a shortening of synaptic ribbons, and to a higher than normal percentage of club-shaped and spherical ribbon morphologies. Restoration of GCAP2 expression in the GCAPs-/- background (GCAP2 expression in the absence of endogenous GCAP1 had the striking result of shortening ribbon length to a much higher degree than overexpression of GCAP2 in the wildtype background, as well as reducing the thickness of the outer plexiform layer without affecting the number of rod photoreceptor cells. These results indicate that preservation of the GCAP1 to GCAP2 relative levels is relevant for maintaining the integrity of the synaptic terminal. Our demonstration of GCAP2 immunolocalization at synaptic ribbons at the ultrastructural level would support a role of GCAPs at mediating the effect of light on morphological remodeling changes of

Third nearest neighbor parameterized tight binding model for graphene nano-ribbons

Directory of Open Access Journals (Sweden)

Van-Truong Tran

2017-07-01

Full Text Available The existing tight binding models can very well reproduce the ab initio band structure of a 2D graphene sheet. For graphene nano-ribbons (GNRs, the current sets of tight binding parameters can successfully describe the semi-conducting behavior of all armchair GNRs. However, they are still failing in reproducing accurately the slope of the bands that is directly associated with the group velocity and the effective mass of electrons. In this work, both density functional theory and tight binding calculations were performed and a new set of tight binding parameters up to the third nearest neighbors including overlap terms is introduced. The results obtained with this model offer excellent agreement with the predictions of the density functional theory in most cases of ribbon structures, even in the high-energy region. Moreover, this set can induce electron-hole asymmetry as manifested in results from density functional theory. Relevant outcomes are also achieved for armchair ribbons of various widths as well as for zigzag structures, thus opening a route for multi-scale atomistic simulation of large systems that cannot be considered using density functional theory.

The OMERACT ultrasound task force--status and perspectives.

LENUS (Irish Health Repository)

Naredo, Esperanza

2011-09-01

This article reports the most recent work of the Outcome Measures in Rheumatology (OMERACT) Ultrasound Task Force, and highlights the future research priorities discussed at the OMERACT 10 meeting. Results of the following studies were presented: (1) intra- and interobserver reliability of ultrasound detecting and scoring synovitis in different joints of patients with rheumatoid arthritis (RA); (2) systematic review of previous ultrasound scoring systems of synovitis in RA; (3) enthesitis systematic review and Delphi definition exercise in spondyloarthritis enthesitis; (4) enthesitis intra- and interobserver reliability exercise; and (5) Delphi definition exercise in hand osteoarthritis, and reliability exercises. Study conclusions were discussed, and a future research agenda was approved, notably further validation of an OMERACT ultrasound global synovitis score (GLOSS) in RA, emphasizing the importance of testing feasibility, predictive value, and added value over standard clinical variables. Future research areas will include validating scoring systems for enthesitis and osteoarthritis, and testing the metric qualities of ultrasound for evaluating tenosynovitis and structural damage in RA.

Development of variable width ribbon heating elements for liquid metal and gas-cooled fast breeder reactor fuel rod simulators

International Nuclear Information System (INIS)

McCulloch, R.W.; Lovell, R.T.; Post, D.W.; Snyder, S.D.

1980-01-01

Variable width ribbon heating elements have been fabricated which provide a chopped cosine, variable heat flux profile for fuel rod simulators used in test loops by the Breeder Reactor Program Thermal Hydraulic Out-of-Reactor Safety test facility and the Gas-Cooled Fast Breeder Reactor Core Flow Test Loop. Thermal, mechanical, and electrical design considerations result in the derivation of an analytical expression for the ribbon contours. From this, the ribbons are machined and wound on numerically controlled equipment. Postprocessing and inspection results in a wound, variable width ribbon with the precise dimensional, electrical, and mechanical properties needed for use in fuel pin simulators

Microstructure evolution in the rapidly quenched Fe{sub 78}Si{sub 9}B{sub 13} ribbons

Energy Technology Data Exchange (ETDEWEB)

Wang, W.-M., E-mail: weiminw@sdu.edu.c [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China); Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Jin, S.F. [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China); Institute of Physics, Chinese Academy of Sciences, Beijing 100080 (China); Zhang, J.T.; Huang, T.; Wang, L.; Bian, X.F. [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China)

2009-11-01

We report microstructure evolution in as-spun Fe{sub 78}Si{sub 9}B{sub 13} ribbons under various wheel speeds (s), which was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). With decreasing s, the volume fraction of the residual amorphous phase (V{sub a}) in the as-spun ribbons decreases gradually, and the total exothermic heat of the crystallization in the DSC curves also decreases, but the ratio of the exothermic heat of the second crystallization to the first one is on the contrary. alpha-Fe is found in the ribbon with s of 32.9 m/s, while alpha-Fe, eutectic alpha-Fe+Fe{sub 2}B, and Fe{sub 3}Si phases are found in ribbons with s of 25.6 and 18.3 m/s. The phase precipitating behavior in cooling processes is well consistent with the annealing process in the literatures.

Report of the Task Force on the MRS/repository interface

International Nuclear Information System (INIS)

1986-02-01

In April 1985, the DOE established an MRS/repository interface task force to analyze the cost and schedule impacts of implementing an integrated waste-management system on the repository and the MRS facility. The intended end products of the study were preliminary conceptual designs of repository and MRS facilities, cost and schedule estimates, and other analyses that would advance the definition of the role and function of the MRS facility, support the preparation of the MRS proposal to Congress, and serve as a source of baseline data for further studies of the integrated waste-management system. From the general overall objectives, specific equations were developed to guide the task-force effort, e.g., What would the surface facilities at the repository look like and cost with an MRS facility in the system. In order to address these questions, five scenarios were defined and analyzed. (A number of other scenarios and associated issues were also explored to a lesser extent.) These five scenarios are as follows. Scenario 1: reference case (no MRS facility). Scenario 2: MRS facility with overpacking of both spent fuel and defense high-level waste. Scenario 3: MRS facility with overpacking of spent fuel only (defense-waste overpacking at the repository). Scenario 4: MRS facility with all overpacking at the repository. Scenario 5: MRS facility with all overpacking at the repository and western fuel shipped directly to the repository. It is apparent that, with such a limited set of scenarios, determination of the optimum system was not an objective of this study. Furthermore, time constraints limited the level of detail to which facility designs could be developed; this level can best be characterized as ''preconceptual.'' These limitations are, however, compatible with the intent of the study, which was to make general comparisons between the several systems on an internally consistent basis

Performance of repetitive tasks induces decreased grip strength and increased fibrogenic proteins in skeletal muscle: role of force and inflammation.

Directory of Open Access Journals (Sweden)

Samir M Abdelmagid

Full Text Available This study elucidates exposure-response relationships between performance of repetitive tasks, grip strength declines, and fibrogenic-related protein changes in muscles, and their link to inflammation. Specifically, we examined forearm flexor digitorum muscles for changes in connective tissue growth factor (CTGF; a matrix protein associated with fibrosis, collagen type I (Col1; a matrix component, and transforming growth factor beta 1 (TGFB1; an upstream modulator of CTGF and collagen, in rats performing one of two repetitive tasks, with or without anti-inflammatory drugs.To examine the roles of force versus repetition, rats performed either a high repetition negligible force food retrieval task (HRNF, or a high repetition high force handle-pulling task (HRHF, for up to 9 weeks, with results compared to trained only (TR-NF or TR-HF and normal control rats. Grip strength declined with both tasks, with the greatest declines in 9-week HRHF rats. Quantitative PCR (qPCR analyses of HRNF muscles showed increased expression of Col1 in weeks 3-9, and CTGF in weeks 6 and 9. Immunohistochemistry confirmed PCR results, and also showed greater increases of CTGF and collagen matrix in 9-week HRHF rats than 9-week HRNF rats. ELISA, and immunohistochemistry revealed greater increases of TGFB1 in TR-HF and 6-week HRHF, compared to 6-week HRNF rats. To examine the role of inflammation, results from 6-week HRHF rats were compared to rats receiving ibuprofen or anti-TNF-α treatment in HRHF weeks 4-6. Both treatments attenuated HRHF-induced increases in CTGF and fibrosis by 6 weeks of task performance. Ibuprofen attenuated TGFB1 increases and grip strength declines, matching our prior results with anti-TNFα.Performance of highly repetitive tasks was associated with force-dependent declines in grip strength and increased fibrogenic-related proteins in flexor digitorum muscles. These changes were attenuated, at least short-term, by anti-inflammatory treatments.

Characterization of consolidated rapidly solidified Cu-Nb ribbons

International Nuclear Information System (INIS)

Ebrahimi, F.; Henne, M.L.C.

1997-01-01

Copper-niobium ribbons produced by melt-spinning were compacted by swaging and consolidated using HIPping. Final processing to obtain in-situ composites was done by swaging. The strength of the composite is discussed in terms of the composition and morphology of the niobium phase as evaluated using electron microscopy techniques

Technology-enhanced learning on campus: insights from EUNIS e-Learning Task Force

OpenAIRE

Ferrell, Gill; Alves, Paulo; Bubas, Goran; Engert, Steffi; Epelboin, Yves; Madey, Jan; Palma, José; Piteira, Martinha; Restivo, T.M.; Ribeiro, Ligia; Sidelmann Rossen, Dorte; Soares, Filomena; Uhomoibhi, James

2011-01-01

In 2010 the EUNIS e-Learning Task Force (ELTF) members collaborated on a review of tools and technologies in use across our member institutions. One of the key features of that paper was the use of technology to give off-campus learners, such as distance learners, those undertaking field studies and learners in the workplace a richly supported learning experience. Building on the success of that collaboration, the ELTF members have turned their attention this year to the use of technology on ...

Long-range ferromagnetism and magnetocaloric effects in rapidly quenched Ni50−xCoxMn50−yAly ribbons

Directory of Open Access Journals (Sweden)

Nguyen Thi Mai

2017-03-01

Full Text Available Ni50−xCoxMn50−yAly (x = 7 and 9; y = 17, 18 and 19 alloy ribbons were prepared by melt-spinning with a tangential velocity of copper wheel of 40 m s−1. X-ray diffraction patterns reveal multi-crystalline phase behavior in the fabricated ribbons. The shape of thermomagnetization curves clearly depends on Co and Al concentrations. The Curie temperatures (TC of the alloy ribbons strongly increase with increasing the Co concentration and slightly decrease with increasing the Al concentration. The martensitic-austenitic phase transition in the alloy ribbons can be manipulated by tuning Co and Al concentrations. The maximum magnetic entropy change |ΔSm|max of about 0.75 J kg−1 K−1 for a field change of 12 kOe at TC ≈ 364 K was achieved for the Ni43Co7Mn32Al18 ribbon. Critical analysis using the Arrott-Noaks and Kouvel–Fisher methods demonstrates the existence of a long-range ferromagnetic order in this ribbon.

Effects of pre-deformation on the martensitic transformation and magnetocaloric property in Ni-Mn-Co-Sn ribbons

International Nuclear Information System (INIS)

Ma Sheng-Can; Xuan Hai-Cheng; Zhang Cheng-Liang; Wang Liao-Yu; Cao Qing-Qi; Wang Dun-Hui; Du You-Wei

2010-01-01

This paper investigates the martensitic transformation and magnetocaloric effect in pre-deformed Ni-Mn-Co-Sn ribbons. The experimental results show that the reverse martensitic transformation temperature T M increases with the increasing pre-pressure, suggesting that pre-deformation is another effective way to adjust T M in ferromagnetic shape memory alloys. Large magnetic entropy changes and refrigerant capacities are obtained in these ribbons as well. It also discusses the origin of the enhanced martensitic transformation temperature and magnetocaloric property in pre-deformed Ni-Mn-Co-Sn ribbons

Universal method for opnimal design main structural assemblies of steel structures stationary conveyor with hanging ribbon

Directory of Open Access Journals (Sweden)

Boslovyak P.V.

2015-10-01

Full Text Available The technique and the detailed algorithm for optimal design of steel structures hospitaltion of the conveyor with hang-ing ribbon. Developed a universal objective function together with the system-limited-subject to limits of main components of steel structures of stationary conveyor with hanging ribbon.

Effects of age and content of augmented feedback on learning an isometric force-production task

NARCIS (Netherlands)

van Dijk, Henk; Mulder, Theo; Hermens, Hermie J.

2007-01-01

This study addressed the interaction between age and the informational content of feedback on learning an isometric force-production task. Healthy men and women (30 young adults: 20 to 35 years; 30 older adults: 55 to 70 years) were randomly assigned to a certain type of feedback: knowledge of

Herself: Elle-Meme. Report of the Nova Scotia Task Force on the Status of Women.

Science.gov (United States)

Nova Scotia Task Force on the Status of Women, Halifax.

This report to the Canadian Government from the Nova Scotia Women's Task Force examines the social issues and problems pertaining to the women's movement in that province. Discussions are provided on the situations and attitudes toward homemakers, working women, marriage, divorce, child care, education, health, and political participation.…

Structural and Electrical Properties Characterization of Sb1.52Bi0.48Te3.0 Melt-Spun Ribbons

Directory of Open Access Journals (Sweden)

Viktoriia Ohorodniichuk

2017-06-01

Full Text Available Melt-spinning (MS has been reported as a promising tool to tailor the microstructure of bulk thermoelectric materials leading to enhanced thermoelectric performances. Here, we report on a detailed characterization of p-type Bi0.48Sb1.52Te3 ribbons produced by melt-spinning. The microstructure of the melt-spun ribbons has been studied by means of X-ray diffraction, scanning and transmission electron microscopy (TEM. The analyses indicate that the ribbons are highly-textured with a very good chemical homogeneity. TEM reveals clear differences in the microstructure at large and short-range scales between the surface that was in contact with the copper wheel and the free surface. These analyses further evidence the absence of amorphous regions in the melt-spun ribbons and the precipitation of elemental Te at the grain boundaries. Low-temperature electrical resistivity and thermopower measurements (20–300 K carried out on several randomly-selected ribbons confirm the excellent reproducibility of the MS process. However, the comparison of the transport properties of the ribbons with those of bulk polycrystalline samples of the same initial composition shows that MS leads to a more pronounced metallic character. This difference is likely tied to changes in deviations from stoichiometry due to the out-of-equilibrium conditions imposed by MS.

The Androgen Excess and PCOS Society criteria for the polycystic ovary syndrome: the complete task force report.

Science.gov (United States)

Azziz, Ricardo; Carmina, Enrico; Dewailly, Didier; Diamanti-Kandarakis, Evanthia; Escobar-Morreale, Héctor F; Futterweit, Walter; Janssen, Onno E; Legro, Richard S; Norman, Robert J; Taylor, Ann E; Witchel, Selma F

2009-02-01

To review all available data and recommend a definition for polycystic ovary syndrome (PCOS) based on published peer-reviewed data, whether already in use or not, to guide clinical diagnosis and future research. Literature review and expert consensus. Professional society. None. None. A systematic review of the published peer-reviewed medical literature, by querying MEDLINE databases, to identify studies evaluating the epidemiology or phenotypic aspects of PCOS. The Task Force drafted the initial report, following a consensus process via electronic communication, which was then reviewed and critiqued by the Androgen Excess and PCOS (AE-PCOS) Society AE-PCOS Board of Directors. No section was finalized until all members were satisfied with the contents, and minority opinions noted. Statements were not included that were not supported by peer-reviewed evidence. Based on the available data, it is the view of the AE-PCOS Society Task Force that PCOS should be defined by the presence of hyperandrogenism (clinical and/or biochemical), ovarian dysfunction (oligo-anovulation and/or polycystic ovaries), and the exclusion of related disorders. However, a minority considered the possibility that there may be forms of PCOS without overt evidence of hyperandrogenism, but recognized that more data are required before validating this supposition. Finally, the Task Force recognized and fully expects that the definition of this syndrome will evolve over time to incorporate new research findings.

The health sciences librarian in medical education: a vital pathways project task force.

Science.gov (United States)

Schwartz, Diane G; Blobaum, Paul M; Shipman, Jean P; Markwell, Linda Garr; Marshall, Joanne Gard

2009-10-01

The Medical Education Task Force of the Task Force on Vital Pathways for Hospital Librarians reviewed current and future roles of health sciences librarians in medical education at the graduate and undergraduate levels and worked with national organizations to integrate library services, education, and staff into the requirements for training medical students and residents. Standards for medical education accreditation programs were studied, and a literature search was conducted on the topic of the role of the health sciences librarian in medical education. Expectations for library and information services in current standards were documented, and a draft standard prepared. A comprehensive bibliography on the role of the health sciences librarian in medical education was completed, and an analysis of the services provided by health sciences librarians was created. An essential role and responsibility of the health sciences librarian will be to provide the health care professional with the skills needed to access, manage, and use library and information resources effectively. Validation and recognition of the health sciences librarian's contributions to medical education by accrediting agencies will be critical. The opportunity lies in health sciences librarians embracing the diverse roles that can be served in this vital activity, regardless of accrediting agency mandates.

The identification of a sensitizing component used in the manufacturing of an ink ribbon

Science.gov (United States)

Anderson, Stacey E.; Tapp, Loren; Durgam, Srinivas; Meade, B. Jean; Jackson, Laurel G.; Cohen, David E.

2015-01-01

Skin diseases including dermatitis constitute ≈ 30% of all occupational illnesses, with a high incidence in the printing industry. An outbreak of contact dermatitis among employees at an ink ribbon manufacturing plant was investigated by scientists from the National Institute for Occupational Safety and Health (NIOSH). Employees in the process areas of the plant were exposed to numerous chemicals and many had experienced skin rashes, especially after the introduction of a new ink ribbon product. To identify the causative agent(s) of the occupational dermatitis, the murine local lymph node assay (LLNA) was used to identify the potential of the chemicals used in the manufacture of the ink ribbon to induce allergic contact dermatitis. Follow-up patch testing with the suspected allergens was conducted on exposed employees. Polyvinyl butyral, a chemical component used in the manufacture of the ink ribbon in question and other products, tested positive in the LLNA, with an EC3 of 3.6%, which identifies it as a potential sensitizer; however, no employees tested positive to this chemical during skin patch testing. This finding has implications beyond those described in this report because of occupational exposure to polyvinyl butyral outside of the printing industry. PMID:22375946

Atypical subtrochanteric and diaphyseal femoral fractures: report of a task force of the American Society for Bone and Mineral Research

DEFF Research Database (Denmark)

Shane, Elizabeth; Burr, David; Ebeling, Peter R

2010-01-01

Reports linking long-term use of bisphosphonates (BPs) with atypical fractures of the femur led the leadership of the American Society for Bone and Mineral Research (ASBMR) to appoint a task force to address key questions related to this problem. A multidisciplinary expert group reviewed pertinent...... published reports concerning atypical femur fractures, as well as preclinical studies that could provide insight into their pathogenesis. A case definition was developed so that subsequent studies report on the same condition. The task force defined major and minor features of complete and incomplete...

White paper from the ACR Task Force on Print Media in Radiology.

Science.gov (United States)

Duszak, Richard; Haines, G Rebecca; Van Duyn Wear, Vanessa; Lexa, Frank James; Bashir, Mustafa; D'Souza, Sharon; Carlos, Ruth; Chen, James Yen-Yu; King, Bernard F; Wald, Christoph

2011-10-01

The rapidly changing technological and business environment in which scientific journals are published will necessitate ongoing reassessment of operations, goals, and priorities. In this white paper, the ACR Task Force on Print Media in Radiology reviews the history and role of print media in radiology; discusses current and anticipated societal, technological, and financial challenges; and explores a variety of strategies to help ensure the relevance of professional society publishing in the future. Copyright © 2011 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Recommendations of the wwPDB NMR Validation Task Force

Science.gov (United States)

Montelione, Gaetano T.; Nilges, Michael; Bax, Ad; Güntert, Peter; Herrmann, Torsten; Richardson, Jane S.; Schwieters, Charles; Vranken, Wim F.; Vuister, Geerten W.; Wishart, David S.; Berman, Helen M.; Kleywegt, Gerard J.; Markley, John L.

2013-01-01

As methods for analysis of biomolecular structure and dynamics using nuclear magnetic resonance spectroscopy (NMR) continue to advance, the resulting 3D structures, chemical shifts, and other NMR data are broadly impacting biology, chemistry, and medicine. Structure model assessment is a critical area of NMR methods development, and is an essential component of the process of making these structures accessible and useful to the wider scientific community. For these reasons, the Worldwide Protein Data Bank (wwPDB) has convened an NMR Validation Task Force (NMR-VTF) to work with the wwPDB partners in developing metrics and policies for biomolecular NMR data harvesting, structure representation, and structure quality assessment. This paper summarizes the recommendations of the NMR-VTF, and lays the groundwork for future work in developing standards and metrics for biomolecular NMR structure quality assessment. PMID:24010715

Report of the Task Force on the Incident of 19th September 2008 at the LHC

CERN Document Server

Bajko, M; Catalan-Lasheras, N; Claudet, S; Cruikshank, P; Dahlerup-Petersen, K; Denz, R; Fessia, P; Garion, C; Jimenez, JM; Kirby, G; Lebrun, Ph; Le Naour, S; Mess, K-H; Modena, M; Montabonnet, V; Nunes, R; Parma, V; Perin, A; de Rijk, G; Rijllart, A; Rossi, L; Schmidt, R; Siemko, A; Strubin, P; Tavian, L; Thiesen, H; Tock, J; Todesco, E; Veness, R; Verweij, A; Walckiers, L; Van Weelderen, R; Wolf, R; Fehér, S; Flora, R; Koratzinos, M; Limon, P; Strait, J

2009-01-01

This report summarizes the findings and recommendations of the AT department Task Force established to investigate the 19th September 2008 incident which occurred in sector 3-4 of the LHC. It includes a number of annexes where specific analyses are detailed.

76 FR 38648 - Availability of the Geothermal Technologies Program Blue Ribbon Panel Report and Request for...

Science.gov (United States)

2011-07-01

....S. has lagged that of solar and wind energy. The purpose of the Blue Ribbon Panel meeting was to... Geothermal Technologies Program Blue Ribbon Panel Report and Request for Public Comment AGENCY: Office of... Panel (the Panel) on March 22/23, 2011 in Albuquerque, New Mexico for a guided discussion on the future...

Practicing for 2023 and 2024: What the AAS Solar Eclipse Task Force Learned from the "Great American Eclipse" of 2017

Science.gov (United States)

Fienberg, R. T.; Speck, A. K.; Habbal, S. R.

2017-12-01

More than three years ahead of the "Great American Eclipse" of August 2017, the American Astronomical Society formed the AAS Solar Eclipse Task Force to function as a think tank, coordinating body, and communication gateway to the vast resources available about the 2017 eclipse and solar eclipses more generally. The task force included professional and amateur astronomers, formal and informal educators, and science journalists; many had experienced total solar eclipses before, and others would experience their first totality in August 2017. The AAS task force secured funding from the AAS Council, the National Science Foundation, and NASA. These resources were used mainly for three purposes: (1) to build a website that contains basic information about solar eclipses, safe viewing practices, and eclipse imaging and video, along with resources for educators and the media and a searchable map of eclipse-related events and activities, with links to other authoritative websites with more detailed information; (2) to solicit, receive, evaluate, and fund proposals for mini-grants to support eclipse-related education and public outreach to underrepresented groups both inside and outside the path of totality; and (3) to organize a series of multidisciplinary workshops across the country to prepare communities for the eclipse and to facilitate collaborations between astronomers, meteorologists, school administrators, and transporation and emergency-management professionals. Most importantly, the AAS Solar Eclipse Task Force focused on developing and disseminating appropriate eclipse safety information. The AAS and NASA jointly developed safety messaging that won the endorsement of the American Academies of Opthalmology and Optometry. In the weeks immediately preceding the eclipse, it became clear that the marketplace was being flooded by counterfeit eclipse glasses and solar viewers, leading to a last minute change in our communication strategy. In this talk, we'll review the

Fish Marketing of Ribbon Fish (Trichiurus sp. in Nusantara Fishing Port (NFPat Palabuhanratu, West Java

Directory of Open Access Journals (Sweden)

Nur Bambang Azis

2018-01-01

Full Text Available The objective of this research is to study the marketing process of ribbon fish (Trichiurus sp., including the marketing margin, marketing agencies, traders and marketing channels The research was carried out for 3 mo in Nusantara Fishing Port (NFP, Palabuhanratu, Sukabumi, West Java. A case study was used in this research. A purposive sampling method was used to collect data from 55 respondents of fish marketing, consisting of fishermen, agents, traders, and retailers, who were involved in the marketing of ribbon fish in NFP Palabuhanratu. The result of the research showed that ribbon fish production in Palabuhanratu fluctuated from year to year. There are two types of ribbon fish marketing, i.e. type one is from fishermen to retailers, and type two is indirect marketing from fisherman to consumers through intermediate traders (exporters. The greatest marketing margin was obtained from the first type, while the smallest marketing margin was obtained from type two. The form of the market was considered to be oligopsony market. Fisherman’s share is greatest in the collectors and the smallest share is on retailers. Marketing process in traders is efficient due to its lowest margin and highest fisherman’s share.

Effects of the ingot phase transition on microstructure and magnetic properties of CeNdFeB melt-spun ribbons

Energy Technology Data Exchange (ETDEWEB)

Wang, Xuchao [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); College of Sciences, Northeastern University, Shenyang 110819 (China); Zhu, Minggang, E-mail: mgzhu@126.com [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); Li, Wei; Zheng, Liyun; Guo, Zhaohui; Du, Xiao [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); Du, An [College of Sciences, Northeastern University, Shenyang 110819 (China)

2015-11-01

The paper studies the phase transition of ingot with the composition (Ce{sub 50}Nd{sub 50}){sub 30}Fe{sub bal}Co{sub 4}Ga{sub 0.2}B{sub 0.92} after the annealing treatment at 1050 °C. The melt-spun ribbons which is prepared by the two treatment status ingots. The phase structure and microstructure morphologies of the ingots and melt-spun ribbons were analysed and observed by XRD and SEM. It was found that the grain size of the ribbons is on the nanometer scale. The EDS results show that there are four different phases in the ingot: (CeNd){sub 2}Fe{sub 14}B, α-Fe, Ce-rich phase and Nd-rich phase. After the annealing treatment, α-Fe, Ce-rich phase, and Nd-rich phase were obviously reduced and the contents of the main phase was significantly increased in the annealed ingot compared with the unanneal treatment ingot. The VSM results show that there is a peak waist in the ribbon which is prepared by the untreated ingot. Because the ingot is uneven, the ribbons may have the secondary phase, the Hcj is 8394 Oe. But the demagnetization curves of the ribbons, which is prepared by the annealed ingot, is relatively smooth and without the soft magnetic phase and the Hcj is 12,528 Oe, which is higher than the unanneal treatment ingot. We can know that the ingot with fine organization is the key factors to preparing high-performance ribbons.

77 FR 32938 - Narrow Woven Ribbons With Woven Selvedge From Taiwan: Preliminary Results of Antidumping Duty...

Science.gov (United States)

2012-06-04

... ribbons subject to the order include all narrow woven fabrics, tapes, and labels that fall within this... the manufacture of typewriter or printer ribbons; (5) Narrow woven labels and apparel tapes, cut-to... 1994 U.S.C.C.A.N. 4040, 4198-99. Furthermore, ``affirmative evidence of bad faith on the part of a...

Folic Acid for the Prevention of Neural Tube Defects : US Preventive Services Task Force Recommendation Statement

NARCIS (Netherlands)

Calonge, Ned; Petitti, Diana B.; DeWitt, Thomas G.; Dietrich, Allen J.; Gregory, Kimberly D.; Grossman, David; Isham, George; LeFevre, Michael L.; Leipzig, Rosanne M.; Marion, Lucy N.; Melnyk, Bernadette; Moyer, Virginia A.; Ockene, Judith K.; Sawaya, George F.; Schwartz, J. Sanford; Wilt, Timothy

2009-01-01

Description: In 1996, the U. S. Preventive Services Task Force (USPSTF) recommended that all women planning or capable of pregnancy take a multivitamin supplement containing folic acid for the prevention of neural tube defects. This recommendation is an update of the 1996 USPSTF recommendation.

Report of the Material Control and Material Accounting Task Force: summary

International Nuclear Information System (INIS)

1978-03-01

A special review was made of the safeguards maintained by licensees possessing 5 kg or more of strategic special nuclear material (SSNM), i.e., plutonium, uranium-233, or uranium enriched in the uranium-235 isotope to 20 percent or more. A Task Force was formed to define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for material control and material accounting systems based on their roles and objectives; assess the extent to which the existing regulatory base meets or provides the capability to meet the recommended goals; and to provide direction for material control and material accounting development, including both near-term and long-term upgrades. Based on results of Task Force investigations it is recommended that licensee plans for measurement control programs be submitted in response to Section 70.57(c) of Title 10 of the Code of Federal Regulations. Other recommendations include the review and upgrading, as necessary, of measurement error propagation models used by each licensee; revision of Nuclear Materials Management and Safeguards System (NMMSS) reporting entities for SSNM licensees to be consistent with the partitioning of facilities into plants or, if appropriate, accounting units; review of NMMSS reporting entities for SSNM licensees to assure that data for high enriched uranium operations are clearly separated from low enriched uranium operations; upgrading of the editing by NMMSS of reported licensee safeguards data for accuracy and consistency; and the acquisition of (a) a secure interactive computer capability for use in collecting, storing, sorting, and analyzing special nuclear material accounting data, and (b) associated flexible computer software that presents safeguards information in a succinct and comprehensive manner

Combined effects of vertical and lateral confinement on the magnetic properties of MnAs micro and nano-ribbons

Energy Technology Data Exchange (ETDEWEB)

Steren, L. B.; Tortarolo, M. [Centro Atómico Constituyentes CNEA, 1650 San Martín (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, C1033AAJ Buenos Aires (Argentina); Fernandez Baldis, F.; Sirena, M. [Consejo Nacional de Investigaciones Científicas y Técnicas, C1033AAJ Buenos Aires (Argentina); Centro Atómico Bariloche and Instituto Balseiro, CNEA, 8400 S. C. de Bariloche (Argentina); Sacchi, M.; Eddrief, M. [Sorbonne Universités, UPMC Univ. Paris 06, UMR 7588, INSP, 4 place Jussieu, F-75005 Paris (France); CNRS, UMR 7588, Institut des Nanosciences de Paris, 4 place Jussieu, F-75005 Paris (France); Etgens, V. H. [Fédération Lavoisier Franklin, UVSQ, 78035 Versailles Cedex (France); Santos, B.; Mentes, T. O.; Locatelli, A. [Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza, Trieste (Italy)

2016-09-07

The micromagnetic domain structure of MnAs films gave place to an intense research activity in the last few years due to its potential application in magneto-electronic devices such as domain-wall track memories and logic circuits. These applications require a full knowledge of miniaturization effects on the magnetic properties of the material. In this work, X-ray photoemission electron microscopy has been used for imaging magnetic domains in lithographically fabricated MnAs ribbons, addressing the dependence of the domain configuration on film thickness and ribbon width. Our experiments show a transition from head-on to regular stripe domains below a critical width/thickness ratio w{sub c} ≈ 6. Micromagnetic simulations suggest that this transition is correlated to the magnetic structure of the surface plane. Depending on the ribbon width and thickness, the magnetic configuration is shown to evolve from flux-closure domain structure to a state of almost homogeneous magnetization, observed for narrower ribbons. The evolution of the domain structure, magnetic fraction, and magnetization with temperature has been studied across the ferromagnetic/paramagnetic transition. Our experiments show that the magnetic configuration in ribbons exhibits higher stability to temperature variations than in as-cast films.

Combined effects of vertical and lateral confinement on the magnetic properties of MnAs micro and nano-ribbons

International Nuclear Information System (INIS)

Steren, L. B.; Tortarolo, M.; Fernandez Baldis, F.; Sirena, M.; Sacchi, M.; Eddrief, M.; Etgens, V. H.; Santos, B.; Mentes, T. O.; Locatelli, A.

2016-01-01

The micromagnetic domain structure of MnAs films gave place to an intense research activity in the last few years due to its potential application in magneto-electronic devices such as domain-wall track memories and logic circuits. These applications require a full knowledge of miniaturization effects on the magnetic properties of the material. In this work, X-ray photoemission electron microscopy has been used for imaging magnetic domains in lithographically fabricated MnAs ribbons, addressing the dependence of the domain configuration on film thickness and ribbon width. Our experiments show a transition from head-on to regular stripe domains below a critical width/thickness ratio w_c ≈ 6. Micromagnetic simulations suggest that this transition is correlated to the magnetic structure of the surface plane. Depending on the ribbon width and thickness, the magnetic configuration is shown to evolve from flux-closure domain structure to a state of almost homogeneous magnetization, observed for narrower ribbons. The evolution of the domain structure, magnetic fraction, and magnetization with temperature has been studied across the ferromagnetic/paramagnetic transition. Our experiments show that the magnetic configuration in ribbons exhibits higher stability to temperature variations than in as-cast films.

Raising the Bar: Aligning and Elevating Teacher Preparation and the Teaching Profession. A Report of the American Federation of Teachers Teacher Preparation Task Force

Science.gov (United States)

American Federation of Teachers (NJ), 2012

2012-01-01

The American Federation of Teachers Teacher Preparation Task Force was established to examine the research on what works and what does not work in the field of teacher preparation as a basis for making policy recommendations. Just as important, the task force considered how best to implement such policy recommendations in a way that takes into…

Alternative methods for skin irritation testing: the current status : ECVAM skin irritation task force report 1

NARCIS (Netherlands)

Botham, P.A.; Earl, L.K.; Fentem, J.H.; Roguet, R.; Sandt, J.J.M.

1998-01-01

The ECVAM Skin Irritation Task Force was established in November 1996, primarily to prepare a report on the current status of the development and validation of alternative tests for skin irritation and corrosion and, in particular, to identify any appropriate non-animal tests for predicting human

Applying the Quebec Task Force criteria as a frame of reference for studies of whiplash injuries

NARCIS (Netherlands)

Versteegen, GJ; van Es, FD; Kingma, J; Meijler, WJ; ten Duis, HJ

Research prior to 1995 showed a diversity of either inclusion or exclusion criteria (or both) for diagnosing whiplash injury. As a consequence, the Quebec Task Force (QTF) developed expert-based criteria, which may be considered as a the 'new' gold standard. Here, we examined the inclusion criteria

Report of the Defense Task Force on Sexual Harassment and Violence at the Military Service Academies

Science.gov (United States)

US Department of Defense, 2005

2005-01-01

In creating this report the Task Force gathered information by conducting site visits; communicating with numerous individuals, including victims; reviewing the Department of Defense survey data; reviewing Academy and Service policies, reports, and data; consulting with subject matter experts; and communicating with related committees and task…

Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons

Energy Technology Data Exchange (ETDEWEB)

Dey, Sushmita; Singh, Satnam; Roy, R.K.; Ghosh, M.; Mitra, A.; Panda, A.K., E-mail: akpanda@nmlindia.org

2016-01-01

The present investigation addresses the magnetocaloric behaviour in a series of Ni{sub 77−x}Mn{sub x}Ga{sub 23} (x=23, 24, 25, 27 and 29) rapidly solidified alloys prepared in the form of ribbons by melt spinning technique. The approach of the study is to identify the off-stoichiometric composition wherein room temperature magneto-structural transformation is achieved. The alloy chemistry was tailored through Mn incorporation for Ni such that the magnetic and structural transitions were at close proximity to achieve highest entropy value of ΔS equal to 8.51 J Kg{sup −1} K{sup −1} for #Mn{sub 24} ribbon measured at an applied field of 3 T. When such transitions are more staggered as in #Mn{sub 29} the entropy value of ribbon reduced to as low as 1.61 J Kg{sup −1} K{sup −1}. Near room temperature transformations in #Mn{sub 24} ribbon have been observed through calorimetric and thermomagnetic evaluation. Reverse martensitic transformation (martensite→autstenite) temperature indicates not only distinct change in the saturation flux density but also an inter-martensitic phase. Microstructural analysis of #Mn{sub 24} alloy ribbon revealed structural ordering with the existence of plate morphology evidenced for martensitic phase. - Highlights: • Magnetocaloric effect in a series of melt spun NiMnGa ribbon is addressed. • The alloy series revealed austenitic state as well as its presence with martensite. • The morphology of the ribbons has been shown and discussed through phase analysis. • Influence of magnetising field on entropy and relative cooling power is discussed. • Influence of intermartensitic state on magnetization plots have also been shown.

Minutes of the kick-off Meeting of the WPRS / EGRPANS / Sodium Fast Reactor Task Force (SFR)

International Nuclear Information System (INIS)

Buiron, Laurent; Stauff, Nicolas; Varaine, Frederic; Blanchet, D.; Stauff, N.; Ivanov, Evgeny; Michel-Sendis, Franco; ); Mikityuk, Konstantin; Pelloni, Sandro; Ponomarev, Alexander; Kim, Taek K.; Taiwo, Temitope; Kereszturi, Andras; Van den Eynde, Gert; Kotiluoto, Petri; Juutilainen, Pauli; Lepp Anen, Jaakko

2011-01-01

The kick-off meeting of the Sodium-cooled fast reactor Task Force (SFR) was an informal one where discussion among participants was encouraged. F. Varaine reminded the participants of the objectives and milestones of the proposed benchmark. A discussion followed on how to define transients in a safety approach. Speaking for ANL, T.A Taiwo anticipated the need to include experts from ANL safety division in the thermal-hydraulics/transient part of the benchmark and observed the initial timeline proposed was too tight to meet. It was agreed the timeline of the benchmark would be modified to a more realistic schedule, keeping the neutronic part as the first stage to finish before the end of the year. It was decided that CEA would provide a spreadsheet template to fill out by benchmark participants to facilitate compilation of results. During the presentations, L. Buiron presented the benchmark in detail and introduced the bibliographic study he has been compiling with the aim to develop a state of the art of feedback calculations. He reported this work is ongoing and could become a contribution for a report of the Expert Group. E. Ivanov presented a proposal for complementary calculations to be included in the benchmark. He reported these calculations would allow for interpretation of the discrepancies that may be observed between the different results obtained by the participants, and commented such an interpretation is essential in any safety analysis presented before decision-makers. A discussion followed on the necessity to include the additional calculations proposed by IRSN at such an early state of the benchmark. The proposal was met with interest, and it was decided that it would be discussed again at the next meeting where first neutronic results could be shown and the importance of these calculations demonstrated. E. Ivanov agreed to provide more detailed specifications of the tallies requested by the next meeting. It was decided that these complementary

Enhanced piezoelectricity and stretchability in energy harvesting devices fabricated from buckled PZT ribbons.

Science.gov (United States)

Qi, Yi; Kim, Jihoon; Nguyen, Thanh D; Lisko, Bozhena; Purohit, Prashant K; McAlpine, Michael C

2011-03-09

The development of a method for integrating highly efficient energy conversion materials onto soft, biocompatible substrates could yield breakthroughs in implantable or wearable energy harvesting systems. Of particular interest are devices which can conform to irregular, curved surfaces, and operate in vital environments that may involve both flexing and stretching modes. Previous studies have shown significant advances in the integration of highly efficient piezoelectric nanocrystals on flexible and bendable substrates. Yet, such inorganic nanomaterials are mechanically incompatible with the extreme elasticity of elastomeric substrates. Here, we present a novel strategy for overcoming these limitations, by generating wavy piezoelectric ribbons on silicone rubber. Our results show that the amplitudes in the waves accommodate order-of-magnitude increases in maximum tensile strain without fracture. Further, local probing of the buckled ribbons reveals an enhancement in the piezoelectric effect of up to 70%, thus representing the highest reported piezoelectric response on a stretchable medium. These results allow for the integration of energy conversion devices which operate in stretching mode via reversible deformations in the wavy/buckled ribbons.

Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled buckling

Science.gov (United States)

Aoki, Michio; Juang, Jia-Yang

2018-02-01

Conventional manufacturing techniques-moulding, machining and casting-exist to produce three-dimensional (3D) shapes. However, these industrial processes are typically geared for mass production and are not directly applicable to residential settings, where inexpensive and versatile tools are desirable. Moreover, those techniques are, in general, not adequate to process soft elastic materials. Here, we introduce a new concept of forming 3D closed hollow shapes from two-dimensional (2D) elastic ribbons by controlled buckling. We numerically and experimentally characterize how the profile and thickness of the ribbon determine its buckled shape. We find a 2D master profile with which various elliptical 3D shapes can be formed. More complex natural and artificial hollow shapes, such as strawberry, hourglass and wheel, can also be achieved via strategic design and pattern engraving on the ribbons. The nonlinear response of the post-buckling regime is rationalized through finite-element analysis, which shows good quantitative agreement with experiments. This robust fabrication should complement conventional techniques and provide a rich arena for future studies on the mechanics and new applications of elastic hollow structures.

The Domestic Telecommunications Carrier Industry. Part I. President's Task Force on Communications Policy. Staff Paper Five.

Science.gov (United States)

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy recommends that public policy ensure an integrated structure in the telecommunications industry, while fostering limited competition to keep the system responsive to new technology and to consumer demands. The present system of regulated monopoly for companies supplying…

Interagency task force on the health effects of ionizing radiation: report of the work group on public information

International Nuclear Information System (INIS)

1979-06-01

The health effects of ionizing radiation recently have been the focus of increased public concern. In response to this concern, in a May 9, 1978, memorandum the White House requested the Secretary of Health, Education, and Welfare to coordinate an interagency program that would, among other things, ensure public awareness and knowledge of the health effects of ionizing radiation. As a result, the Interagency Task Force on Ionizing Radiation was formed. The Information Work Group of the Task Force was asked to outline a public information program to meet the needs of the general public, the health and scientific community, workers, and other persons exposed to low levels of ionizing radiation in the past and at present or who may be exposed in the future. The Work Group is composed of 16 members, each representing an agency participating on the Interagency Task Force on Ionizing Radiation. The Work Group members used the draft Reports of the Science Work Group, the Radiation Exposure Reduction Work Group, the Care and Benefits Work Group, and the Privacy Work Group as a basis for developing the Information Report. In addition, the Information Work Group conducted a preliminary review of existing federal information programs. Meetings were held with representatives of environmental and trade groups, unions, and professional societies to help define the dimensions and priorities of a public information program

Report of the Defense Science Board Task Force on Mission Impact of Foreign Influence on DoD Software

National Research Council Canada - National Science Library

2007-01-01

The Defense Science Board (DSB) Task Force on Mission Impact of Foreign Influence on DoD Software examined areas in software security, security architecture, and risk mitigation and received briefings from industry, academia...

Fish Marketing of Ribbon Fish (Trichiurus sp.) in Nusantara Fishing Port (NFP)at Palabuhanratu, West Java

Science.gov (United States)

Bambang, Azis Nur

2018-02-01

The objective of this research is to study the marketing process of ribbon fish (Trichiurus sp.), including the marketing margin, marketing agencies, traders and marketing channels The research was carried out for 3 mo in Nusantara Fishing Port (NFP), Palabuhanratu, Sukabumi, West Java. A case study was used in this research. A purposive sampling method was used to collect data from 55 respondents of fish marketing, consisting of fishermen, agents, traders, and retailers, who were involved in the marketing of ribbon fish in NFP Palabuhanratu. The result of the research showed that ribbon fish production in Palabuhanratu fluctuated from year to year. There are two types of ribbon fish marketing, i.e. type one is from fishermen to retailers, and type two is indirect marketing from fisherman to consumers through intermediate traders (exporters). The greatest marketing margin was obtained from the first type, while the smallest marketing margin was obtained from type two. The form of the market was considered to be oligopsony market. Fisherman's share is greatest in the collectors and the smallest share is on retailers. Marketing process in traders is efficient due to its lowest margin and highest fisherman's share.

Compilation of reports prepared for the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management

International Nuclear Information System (INIS)

1993-11-01

This report contains reports prepared for the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management, from experts in the United States. The contents of the report focus mainly on public opinion, and government policies as perceived by the public

Compilation of reports prepared for the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This report contains reports prepared for the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management, from experts in the United States. The contents of the report focus mainly on public opinion, and government policies as perceived by the public.

Part-time careers in academic internal medicine: A report from the association of specialty professors part-time careers task force on behalf of the alliance for academic internal medicine

OpenAIRE

Linzer, M; Warde, C; Alexander, RW; DeMarco, DM; Haupt, A; Hicks, L; Kutner, J; Mangione, CM; Mechaber, H; Rentz, M; Riley, J; Schuster, B; Solomon, GD; Volberding, P; Ibrahim, T

2009-01-01

To establish guidelines for more effectively incorporating part-time faculty into departments of internal medicine, a task force was convened in early 2007 by the Association of Specialty Professors. The task force used informal surveys, current literature, and consensus building among members of the Alliance for Academic Internal Medicine to produce a consensus statement and a series of recommendations. The task force agreed that part-time faculty could enrich a department of medicine, enhan...

Comparisons of an open-ended vs. forced-choice 'mind reading' task: implications for measuring perspective-taking and emotion recognition.

Directory of Open Access Journals (Sweden)

Tracy G Cassels

Full Text Available Perspective-taking and emotion recognition are essential for successful social development and have been the focus of developmental research for many years. Although the two abilities often overlap, they are distinct and our understanding of these abilities critically rests upon the efficacy of existing measures. Lessons from the literature differentiating recall versus recognition memory tasks led us to hypothesize that an open-ended emotion recognition measure would be less reliant on compensatory strategies and hence a more specific measure of emotion recognition abilities than a forced-choice task. To this end, we compared an open-ended version of the Reading the Mind in the Eyes Task with the original forced-choice version in two studies: 118 typically-developing 4- to 8-year-olds (Study 1 and 139 5- to 12-year-olds; 85 typically-developing and 54 with learning disorders (Study 2. We found that the open-ended version of the task was a better predictor of empathy and more reliably discriminated typically-developing children from those with learning disorders. As a whole, the results suggest that the open-ended version is a more sensitive measure of emotion recognition specifically.

Consensus statement of the ESICM task force on colloid volume therapy in critically ill patients

DEFF Research Database (Denmark)

Reinhart, Konrad; Perner, Anders; Sprung, Charles L

2012-01-01

PURPOSE: Colloids are administered to more patients than crystalloids, although recent evidence suggests that colloids may possibly be harmful in some patients. The European Society of Intensive Care Medicine therefore assembled a task force to compile consensus recommendations based on the current...... that any new colloid should be introduced into clinical practice only after its patient-important safety parameters are established....

Network Centric Operations (NCO) Case Study: U.S. Navy's Fifth Fleet Task Force 50 in Operation ENDURING FREEDOM

National Research Council Canada - National Science Library

Garstka, John; Holloman, Kimberly; Balisle, Christine W; Adkins, Mark; Kruse, Jon

2006-01-01

.... The focus is on the background and creation of Task Force 50 (TF-50), and primarily on the evolution of the transformational capabilities that permitted TF-50 to succeed in the manner that it did...

Magnetic properties of fcc (Co95Fe5)1-xAlx ribbons

International Nuclear Information System (INIS)

Makhlouf, Salah A.; Parker, F.T.; Benameur, T.

1999-01-01

Rapidly quenched (Co 95 Fe 5 ) 1-x Al x ribbons are investigated by X-ray diffraction, magnetization, and Moessbauer effect measurements. A single fcc phase is obtained for all ribbons x ≤ 10 at.%. The lattice constant increases linearly with x and is discussed in connection with magnetic moment. The influence of Al substitution on both magnetization and Fe-atom hyperfine field (H) is studied. At 296 K, the magnetization decreases linearly while H drops nonlinearly as x increases. Al substitution leads to substantial differences in iron hyperfine fields in bcc and fcc systems. Fe moment is perturbed differently by Al substitution in fcc (Co 95 Fe 5 ) 1-x Al x and bcc Fe-Al systems

Force and Directional Force Modulation Effects on Accuracy and Variability in Low-Level Pinch Force Tracking.

Science.gov (United States)

Park, Sangsoo; Spirduso, Waneen; Eakin, Tim; Abraham, Lawrence

2018-01-01

The authors investigated how varying the required low-level forces and the direction of force change affect accuracy and variability of force production in a cyclic isometric pinch force tracking task. Eighteen healthy right-handed adult volunteers performed the tracking task over 3 different force ranges. Root mean square error and coefficient of variation were higher at lower force levels and during minimum reversals compared with maximum reversals. Overall, the thumb showed greater root mean square error and coefficient of variation scores than did the index finger during maximum reversals, but not during minimum reversals. The observed impaired performance during minimum reversals might originate from history-dependent mechanisms of force production and highly coupled 2-digit performance.

Sci—Fri PM: Topics — 03: The Global Task Force on Radiotherapy for Cancer Control: Core Investments

Energy Technology Data Exchange (ETDEWEB)

Van Dyk, J. [Western University, London, Ontario (Canada); Jaffray, D. A.; MacPherson, M. S. [Princess Margaret Cancer Centre, Toronto, Ontario (Canada)

2014-08-15

The Union for International Cancer Control (UICC) is a membership-based, non-governmental organization with a mandate to “…to unite the cancer community to reduce the global cancer burden, to promote greater equity, and to integrate cancer control into the world health and development agenda.” COMP is an associate member of the UICC. It is well recognized by the UICC that there are major gaps between high, and low and middle income countries, in terms of access to cancer services including access to radiation therapy. In this context, the UICC has developed a Global Task Force on Radiotherapy for Cancer Control with a charge to answer a single question: “What does it cost to close the gap between what exists today and reasonable access to radiotherapy globally?” The Task Force consists of leaders internationally recognized for their radiation treatment related expertise (radiation oncologists, medical physicists, radiation therapists) as well as those with global health and economics specialization. The Task Force has developed three working groups: (1) to look at the global burden of cancer; (2) to look at the infrastructure requirements (facilities, equipment, personnel); and (3) to consider outcomes in terms of numbers of lives saved and palliated patients. A report is due at the World Cancer Congress in December 2014. This presentation reviews the infrastructure considerations under analysis by the second work group. The infrastructure parameters being addressed include capital costs of buildings and equipment and operating costs, which include human resources, equipment servicing and quality control, and general overhead.

77 FR 58143 - Interagency Task Force on Antimicrobial Resistance (ITFAR): An Update of A Public Health Action...

Science.gov (United States)

2012-09-19

...-2012-0011] Interagency Task Force on Antimicrobial Resistance (ITFAR): An Update of A Public Health...), Department of Health and Human Services (HHS). ACTION: Notice of public meeting and request for comments... Federal agencies in accomplishing activities outlined in ``A Public Health Action Plan to Combat...

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material.

Science.gov (United States)

Gu, X N; Li, X L; Zhou, W R; Cheng, Y; Zheng, Y F

2010-06-01

Rapidly solidified (RS) Mg–3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s(-1), 30 m s(-1) and 45 m s(-1) with the as-cast Mg–3Ca alloy ingot as a raw material. The RS45 Mg–3Ca alloy ribbon showed a much more fine grain size feature (approximately 200–500 nm) in comparison to the coarse grain size (50–100 μm)of the original as-cast Mg–3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg–3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds(1.43 mm yr(-1) for RS15, 0.94 mm yr(-1) for RS30 and 0.36 mm yr(-1) for RS45). The RS Mg–3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg–3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg–3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells,whereas the as-cast Mg–3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg–3Ca alloy ribbons than that of the as-cast Mg–3Ca alloy ingot.

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material

International Nuclear Information System (INIS)

Gu, X N; Zhou, W R; Zheng, Y F; Li, X L; Cheng, Y

2010-01-01

Rapidly solidified (RS) Mg-3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s -1 , 30 m s -1 and 45 m s -1 ) with the as-cast Mg-3Ca alloy ingot as a raw material. The RS45 Mg-3Ca alloy ribbon showed a much more fine grain size feature (approximately 200-500 nm) in comparison to the coarse grain size (50-100 μm) of the original as-cast Mg-3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg-3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds (1.43 mm yr -1 for RS15, 0.94 mm yr -1 for RS30 and 0.36 mm yr -1 for RS45). The RS Mg-3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg-3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg-3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells, whereas the as-cast Mg-3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg-3Ca alloy ribbons than that of the as-cast Mg-3Ca alloy ingot.

Creating A Theater-Based Operational Link Between Strategic Mobility and Theater-Level Logistics For The Joint Task Force Commander

National Research Council Canada - National Science Library

Moncrief, Keith

2003-01-01

... required. Only the correct delivery of these commodities will help JFCs mitigate risk to U.S. (and coalition) forces, accomplish mission essential tasks, and safeguard precious human life during contingencies...

An overview of the activities of the OECD/NEA Task Force on adapting computer codes in nuclear applications to parallel architectures

Energy Technology Data Exchange (ETDEWEB)

Kirk, B.L. [Oak Ridge National Lab., TN (United States); Sartori, E. [OCDE/OECD NEA Data Bank, Issy-les-Moulineaux (France); Viedma, L.G. de [Consejo de Seguridad Nuclear, Madrid (Spain)

1997-06-01

Subsequent to the introduction of High Performance Computing in the developed countries, the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) created the Task Force on Adapting Computer Codes in Nuclear Applications to Parallel Architectures (under the guidance of the Nuclear Science Committee`s Working Party on Advanced Computing) to study the growth area in supercomputing and its applicability to the nuclear community`s computer codes. The result has been four years of investigation for the Task Force in different subject fields - deterministic and Monte Carlo radiation transport, computational mechanics and fluid dynamics, nuclear safety, atmospheric models and waste management.

An overview of the activities of the OECD/NEA Task Force on adapting computer codes in nuclear applications to parallel architectures

International Nuclear Information System (INIS)

Kirk, B.L.; Sartori, E.; Viedma, L.G. de

1997-01-01

Subsequent to the introduction of High Performance Computing in the developed countries, the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) created the Task Force on Adapting Computer Codes in Nuclear Applications to Parallel Architectures (under the guidance of the Nuclear Science Committee's Working Party on Advanced Computing) to study the growth area in supercomputing and its applicability to the nuclear community's computer codes. The result has been four years of investigation for the Task Force in different subject fields - deterministic and Monte Carlo radiation transport, computational mechanics and fluid dynamics, nuclear safety, atmospheric models and waste management

Sustainable energy for all. Technical report of task force 1 in support of the objective to achieve universal access to modern energy services by 2030

Energy Technology Data Exchange (ETDEWEB)

Birol, Fatih [International Energy Agency, Paris (France); Brew-Hammond, Abeeku [University of Science and Technology (Ghana

2012-04-15

The UN Secretary General established the Sustainable Energy for All initiative in order to guide and support efforts to achieve universal access to modern energy, rapidly increase energy efficiency, and expand the use of renewable energies. Task forces were formed involving prominent energy leaders and experts from business, government, academia and civil society worldwide. The goal of the Task Forces is to inform the implementation of the initiative by identifying challenges and opportunities for achieving its objectives. This report contains the findings of Task Force One which is dedicated to the objective of achieving universal access to modern energy services by 2030. The report shows that universal energy access can be realized by 2030 with strong, focused actions set within a coordinated framework.

Influence of sports flooring and shoes on impact forces and performance during jump tasks.

Directory of Open Access Journals (Sweden)

Laurent Malisoux

Full Text Available We aim to determine the influence of sports floorings and sports shoes on impact mechanics and performance during standardised jump tasks. Twenty-one male volunteers performed ankle jumps (four consecutive maximal bounds with very dynamic ankle movements and multi-jumps (two consecutive maximal counter-movement jumps on force plates using minimalist and cushioned shoes under 5 sports flooring (SF conditions. The shock absorption properties of the SF, defined as the proportion of peak impact force absorbed by the tested flooring when compared with a concrete hard surface, were: SF0 = 0% (no flooring, SF1 = 19%, SF2 = 26%, SF3 = 37% and SF4 = 45%. Shoe and flooring effects were compared using 2x5 repeated-measures ANOVA with post-hoc Bonferroni-corrected comparisons. A significant interaction between SF and shoe conditions was found for VILR only (p = 0.003. In minimalist shoes, SF influenced Vertical Instantaneous Loading Rate (VILR during ankle jumps (p = 0.006 and multi-jumps (p<0.001, in accordance with shock absorption properties. However, in cushioned shoes, SF influenced VILR during ankle jumps only (p<0.001. Contact Time was the only additional variable affected by SF, but only during multi-jumps in minimalist shoes (p = 0.037. Cushioned shoes induced lower VILR (p<0.001 and lower Contact Time (p≤0.002 during ankle jumps and multi-jumps compared to minimalist shoes. During ankle jumps, cushioned shoes induced greater Peak Vertical Ground Reaction Force (PVGRF, p = 0.002, greater Vertical Average Loading Rate (p<0.001, and lower eccentric (p = 0.008 and concentric (p = 0.004 work. During multi-jumps, PVGRF was lower (p<0.001 and jump height was higher (p<0.001 in cushioned compared to minimalist shoes. In conclusion, cushioning influenced impact forces during standardised jump tasks, whether it was provided by the shoes or the sports flooring. VILR is the variable that was the most affected.

Report of the Secretary of Defense Task Force on DoD Nuclear Weapons Management. Phase II: Review of the DoD Nuclear Mission

National Research Council Canada - National Science Library

Schlesinger, James R; Carns, Michael P; Crouch, II, J. D; Gansler, Jacques S; Giambastiani, Jr., Edmund P; Hamre, John J; Miller, Franklin C; Williams, Christopher A; Blackwell, Jr, James A

2008-01-01

Incidents related to the Air Force's mishandling of nuclear weapons and components led to the creation of the Task Force in June 2008 to provide advice on nuclear matters for the Secretary of Defense...

Concurrent gradients of ribbon volume and AMPA-receptor patch volume in cochlear afferent synapses on gerbil inner hair cells.

Science.gov (United States)

Zhang, Lichun; Engler, Sina; Koepcke, Lena; Steenken, Friederike; Köppl, Christine

2018-07-01

The Mongolian gerbil is a classic animal model for age-related hearing loss. As a prerequisite for studying age-related changes, we characterized cochlear afferent synaptic morphology in young adult gerbils, using immunolabeling and quantitative analysis of confocal microscopic images. Cochlear wholemounts were triple-labeled with a hair-cell marker, a marker of presynaptic ribbons, and a marker of postsynaptic AMPA-type glutamate receptors. Seven cochlear positions covering an equivalent frequency range from 0.5 - 32 kHz were evaluated. The spatial positions of synapses were determined in a coordinate system with reference to their individual inner hair cell. Synapse numbers confirmed previous reports for gerbils (on average, 20-22 afferents per inner hair cell). The volumes of presynaptic ribbons and postsynaptic glutamate receptor patches were positively correlated: larger ribbons associated with larger receptor patches and smaller ribbons with smaller patches. Furthermore, the volumes of both presynaptic ribbons and postsynaptic receptor patches co-varied along the modiolar-pillar and the longitudinal axes of their hair cell. The gradients in ribbon volume are consistent with previous findings in cat, guinea pig, mouse and rat and further support a role in differentiating the physiological properties of type I afferents. However, the positive correlation between the volumes of pre- and postsynaptic elements in the gerbil is different to the opposing gradients found in the mouse, suggesting species-specific differences in the postsynaptic AMPA receptors that are unrelated to the fundamental classes of type I afferents. Copyright © 2018 Elsevier B.V. All rights reserved.

A report on older-age bipolar disorder from the International Society for Bipolar Disorders Task Force

Science.gov (United States)

Sajatovic, Martha; Strejilevich, Sergio A; Gildengers, Ariel G; Dols, Annemiek; Al Jurdi, Rayan K; Forester, Brent P; Kessing, Lars Vedel; Beyer, John; Manes, Facundo; Rej, Soham; Rosa, Adriane R; Schouws, Sigfried NTM; Tsai, Shang-Ying; Young, Robert C; Shulman, Kenneth I

2015-01-01

Objectives In the coming generation, older adults with bipolar disorder (BD) will increase in absolute numbers as well as proportion of the general population. This is the first report of the International Society for Bipolar Disorder (ISBD) Task Force on Older-Age Bipolar Disorder (OABD). Methods This task force report addresses the unique aspects of OABD including epidemiology and clinical features, neuropathology and biomarkers, physical health, cognition, and care approaches. Results The report describes an expert consensus summary on OABD that is intended to advance the care of patients, and shed light on issues of relevance to BD research across the lifespan. Although there is still a dearth of research and health efforts focused on older adults with BD, emerging data has brought some answers, innovative questions, and novel perspectives related to the notion of late onset, medical comorbidity, and the vexing issue of cognitive impairment and decline. Conclusions Improving our understanding of the biological, clinical, and social underpinnings relevant to OABD is an indispensable step in building a complete map of BD across the lifespan. PMID:26384588

Stereo advantage for a peg-in-hole task using a force-feedback manipulator

Science.gov (United States)

Spain, Edward H.

1990-01-01

An improved assessment methodology has been implemented at NOSC and tested using an instrumented peg-in-hole (PiH) taskboard. Several aspects of the methodology are discussed in light of their implications for future studies of manipulator performance. Using a simple (but high-fidelity) force-feedback manipulator, a group of 9 trained operators showed a consistent advantage for stereoscopic TV viewing over monoscopic TV viewing when performing the PiH task. To introduce a controlled element of spatial uncertainty into the testing procedure, taskboard orientation relative to the manipulator and remote video camera head was changed in a randomized order on a trial-by-trial basis. The stereoscopic advantage demonstrated by this study can reasonably be expected to be even more pronounced as the quality of the stereo TV interface is improved and force-feedback provided through the manipulator system is diminished and/or distorted.

77 FR 22324 - Correction-Solicitation for Nominations for Members of the U.S. Preventive Services Task Force...

Science.gov (United States)

2012-04-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Correction--Solicitation for Nominations for Members of the U.S. Preventive Services Task Force (USPSTF) The original date of publication for this Federal Register notice was March 28, 2012, Volume 77, Number 60, pages 18823...

Guidelines for Cognitive Behavioral Training within Doctoral Psychology Programs in the United States: Report of the Inter-Organizational Task Force on Cognitive and Behavioral Psychology Doctoral Education

Science.gov (United States)

Klepac, Robert K.; Ronan, George F.; Andrasik, Frank; Arnold, Kevin D.; Belar, Cynthia D.; Berry, Sharon L.; Christofff, Karen A.; Craighead, Linda W.; Dougher, Michael J.; Dowd, E. Thomas; Herbert, James D.; McFarr, Lynn M.; Rizvi, Shireen L.; Sauer, Eric M.; Strauman, Timothy J.

2012-01-01

The Association for Behavioral and Cognitive Therapies initiated an interorganizational task force to develop guidelines for integrated education and training in cognitive and behavioral psychology at the doctoral level in the United States. Fifteen task force members representing 16 professional associations participated in a yearlong series of…

Fiscal 1976 Sunshine Project result report. R and D on photovoltaic power generation system (R and D on Si ribbon crystal vertical pulling method); 1976 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribbon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-31

This report describes the fiscal 1976 research result on Si ribbon crystal vertical pulling method for photovoltaic power generation systems. The equipment for simultaneous growth of 3 ribbon crystals was designed and prepared in consideration of capillary die arrangement, vertical pulling method and control method of temperature profiles on the die surface. The temperature profiles on the die surface were controlled by subheaters for 3 parts of each capillary die which were divided longitudinally. Ribbon crystals grew up to 5mm simultaneously through both end dies. By cooling a part of crystal, fast pulling is probably possible. Study was made on the correlation between various crystal defects of Si ribbon crystals and cell characteristics, and in particular, basic characteristics of SiC deposited particles by SEM observation to reduce their impacts. Possibility of simultaneous vertical pulling of crystals was verified by using a capillary carbon die for multi-pulling. Although crystals grew by eutectic reaction under saturated dissolution of carbon, crystals with no transition were obtained. An SiC-coated die was excellent rather than carbon one. (NEDO)

Report and recommendations of the task force on tree and shrub planting on active oil sands tailings dams

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-02-15

In oil sands reclamation operations in Canada there is a conflict between dam safety and the planting of trees and woody shrubs. Indeed, tree planting is being restricted on the downstream slopes of dams to avoid damage to drains and to ensure the integrity of visual and instrumentation monitoring conflicting thus with progressive reclamation. Alberta Environment hired the Oil Sands Research and Information Network (OSRIN), an independent organization which analyzes and interprets available knowledge on soil and water reclamation in the oil sands mining sector, to address this issue and make recommendations. The organization appointed a Task Force which presented its final report in March 2011. The Task Force recommended that the Engineer of Record should be responsible for determining the tree and shrub planting zones and that he should submit his plans to Alberta Environment for approval.

Report of the Error and Emittance Task Force on the superconducting super collider: Part 1, Resistive machines

International Nuclear Information System (INIS)

1993-10-01

A review of the design and specifications of the resistive accelerators in the SSC complex was conducted during the past year. This review was initiated in response to a request from the SSC Project Manager. The Error and Emittance Task Force was created October 30, 1992, and charged with reviewing issues associated with the specification of errors and tolerances throughout the injector chain and in the Collider, and to optimize the global error budget. Effects which directly impact the emittance budget were of prime importance. The Task Force responded to three charges: Examination of the resistive accelerators and their injection and extraction systems; examination of the connecting beamlines and the overall approach taken in their design; and global filling, timing, and synchronization issues. The High Energy Booster and the Collider were deemed to be sufficiently different from the resistive accelerators that it was decided to treat them as a separate group. They will be the subject of a second part to this report

Biomechanically determined hand force limits protecting the low back during occupational pushing and pulling tasks.

Science.gov (United States)

Weston, Eric B; Aurand, Alexander; Dufour, Jonathan S; Knapik, Gregory G; Marras, William S

2018-06-01

Though biomechanically determined guidelines exist for lifting, existing recommendations for pushing and pulling were developed using a psychophysical approach. The current study aimed to establish objective hand force limits based on the results of a biomechanical assessment of the forces on the lumbar spine during occupational pushing and pulling activities. Sixty-two subjects performed pushing and pulling tasks in a laboratory setting. An electromyography-assisted biomechanical model estimated spinal loads, while hand force and turning torque were measured via hand transducers. Mixed modelling techniques correlated spinal load with hand force or torque throughout a wide range of exposures in order to develop biomechanically determined hand force and torque limits. Exertion type, exertion direction, handle height and their interactions significantly influenced dependent measures of spinal load, hand force and turning torque. The biomechanically determined guidelines presented herein are up to 30% lower than comparable psychophysically derived limits and particularly more protective for straight pushing. Practitioner Summary: This study utilises a biomechanical model to develop objective biomechanically determined push/pull risk limits assessed via hand forces and turning torque. These limits can be up to 30% lower than existing psychophysically determined pushing and pulling recommendations. Practitioners should consider implementing these guidelines in both risk assessment and workplace design moving forward.

Oxidation behaviour of ribbon shape carbon fibers and their composites

International Nuclear Information System (INIS)

Manocha, L.M.; Warrier, Ashish; Manocha, S.; Edie, D.D.; Ogale, A.A.

2006-01-01

Carbon fibers, though important constituent as reinforcements for high performance carbon/carbon composites, are shadowed by their oxidation in air at temperatures beginning 450 deg. C. Owing to tailorable properties of carbon fibers, efforts are underway to explore structural modification possibilities to improve the oxidation resistance of the fibers and their composites. The pitch based ribbon shape carbon fibers are found to have highly preferential oriented graphitic structure resulting in high mechanical properties and thermal conductivity. In the present work oxidation behaviour of ribbon shape carbon fibers and their composites heat treated to 1000-2700 deg. C has been studied. SEM examination of these composites exhibits development of graphitic texture and ordering within the fibers with increase in heat treatment temperature. Oxidation studies made by thermogravimetric analysis in air show that matrix has faster rate of oxidation and in the initial stages the matrix gets oxidized at faster rate with slower rate of oxidation of the fibers depending on processing conditions of fibers and composites

Plasma immersion ion implantation of boron for ribbon silicon solar cells

Directory of Open Access Journals (Sweden)

Derbouz K.

2013-09-01

Full Text Available In this work, we report for the first time on the solar cell fabrication on n-type silicon RST (for Ribbon on Sacrificial Template using plasma immersion ion implantation. The experiments were also carried out on FZ silicon as a reference. Boron was implanted at energies from 10 to 15 kV and doses from 1015 to 1016 cm-2, then activated by a thermal annealing in a conventional furnace at 900 and 950 °C for 30 min. The n+ region acting as a back surface field was achieved by phosphorus spin-coating. The frontside boron emitter was passivated either by applying a 10 nm deposited SiOX plasma-enhanced chemical vapor deposition (PECVD or with a 10 nm grown thermal oxide. The anti-reflection coating layer formed a 60 nm thick SiNX layer. We show that energies less than 15 kV and doses around 5 × 1015 cm-2 are appropriate to achieve open circuit voltage higher than 590 mV and efficiency around 16.7% on FZ-Si. The photovoltaic performances on ribbon silicon are so far limited by the bulk quality of the material and by the quality of the junction through the presence of silicon carbide precipitates at the surface. Nevertheless, we demonstrate that plasma immersion ion implantation is very promising for solar cell fabrication on ultrathin silicon wafers such as ribbons.

Magneto-Impedance behavior of Co-Fe-Nb-Si-B-based ribbons

Energy Technology Data Exchange (ETDEWEB)

Sarkar, Partha; Mohanta, O.; Pal, S.K.; Panda, A.K. [National Metallurgical Laboratory, Council of Scientific and Industrial Research, Jamshedpur 831007 (India); Mitra, A., E-mail: amitra@nmlindia.or [National Metallurgical Laboratory, Council of Scientific and Industrial Research, Jamshedpur 831007 (India)

2010-04-15

The giant magneto-impedance of melt spun Co{sub x}Fe{sub 72-x}Nb{sub 4}Si{sub 4}B{sub 20}(x=10, 20, 36, 50) amorphous and nanostructured ribbons have been investigated. Alloys have been optimized at the driving current amplitude, frequency and found that amorphous ribbon of nominal composition of Co{sub 36}Fe{sub 36}Nb{sub 4}Si{sub 4}B{sub 20} shown maximum GMI ratio of 13%. The behaviour of the driving current amplitude on the GMI behaviour was studied and the sample was optimized for driving current amplitude, I{sub ac}=10 mA. The frequency dependence of the GMI behaviour was studied for the ribbon sample Co{sub 36}Fe{sub 36}Nb{sub 4}Si{sub 4}B{sub 20} at frequency in the range of 100 kHz-1.2 MHz of the optimized driving current amplitude and it was found that the sample showed the maximum GMI behaviour at f=700 kHz. The optimized samples were Joule heated at the current density J=0-35 A/m{sup 2} for a period of 1 min. The GMI ratio initially increased then progressively deteriorated with J, but after a certain range it shows up to 16% of improvement in the magneto-impedance value due the increase of nanocrystalline volume fraction. The asymmetry in the GMI profile was observed for the sample Joule heated at J=1-5 A/m{sup 2} for 1 min.

Effect of annealing treatment on soft magnetic properties of Fe-6.5 wt% Si wide ribbons

International Nuclear Information System (INIS)

Roy, R.K.; Panda, A.K.; Ghosh, M.; Mitra, A.; Ghosh, R.N.

2009-01-01

The 25 mm wide ribbons of Fe-6.5 wt% Si alloy have been developed by melt spinning technique, showing sufficient ductility and white silver appearance. Two magnetic transitions take place at 676 and 760 deg. C due to the formation of B2 ordered phase and A2 disordered paramagnetic phase, respectively. The saturation magnetization of the ribbon is 17.5 kG under the applied field of 12 kG. The as-cast ribbons consist of disordered A2 structure with a low volume of B2 phases while the annealed microstructure comprises a dispersion of B2 domains in the disordered A2 matrix. The alloy shows the enhancement of the soft magnetic properties with a reduction in coercivity from 150 A/m in the as-cast state to 45 A/m in the annealed condition at 850 deg. C.

Manifold-splitting regularization, self-linking, twisting, writhing numbers of space-time ribbons

International Nuclear Information System (INIS)

Tze, C.H.

1988-01-01

The authors present an alternative formulation of Polyakov's regularization of Gauss' integral formula for a single closed Feynman path. A key element in his proof of the D = 3 fermi-bose transmutations induced by topological gauge fields, this regularization is linked here with the existence and properties of a nontrivial topological invariant for a closed space ribbon. This self-linking coefficient, an integer, is the sum of two differential characteristics of the ribbon, its twisting and writhing numbers. These invariants form the basis for a physical interpretation of our regularization. Their connection to Polyakov's spinorization is discussed. The authors further generalize their construction to the self-linking, twisting and writhing of higher dimensional d = eta(odd) submanifolds in D = (2eta + 1) space-time

Report of the Census Task Force on beamline control system requirements

International Nuclear Information System (INIS)

Barsotti, E.J.; Bartlett, J.F.; Bogert, V.D.; Borcherding, F.O.; Butler, J.; Czarapata, P.C.; Spalding, W.J.; Thomas, A.D.

1986-01-01

A special task force was appointed to study the experience with the present beamline control system at Fermilab and to make recommendations in this area. The charge of the committee and the list of its members are appended. In order to carry out its assignment, the committee conducted a series of meetings in which it discussed the controls situation in general and the best way to approach the user community. The various groups of users were identified, and a letter was written to representatives of these groups asking questions concerning the present system and future needs. The committee met with each group to discuss the response to these questions. Written summaries of the discussions are appended. Conclusions are drawn regarding current problems, systematic upgrades and specific recommendations

77 FR 42334 - Meeting of the Attorney General's National Task Force on Children Exposed to Violence (Correction)

Science.gov (United States)

2012-07-18

... Attorney General's National Task Force on Children Exposed to Violence (Correction) AGENCY: Office of...) published a notice in the Federal Register on July 2, 2012, announcing a meeting of the Attorney General's..., but rather, will be conducting preparatory work related to developing a draft report to the Attorney...

Effect of wheel speed and annealing temperature on microstructure and texture evolution of Ni{sub 45}Mn{sub 36.6}In{sub 13.4}Co{sub 5} ribbon

Energy Technology Data Exchange (ETDEWEB)

Feng, Yan, E-mail: yanfeng@nwpu.edu.cn [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China); Chen, Hong [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China); Gao, Li [College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306 (China); Wang, Haibo [College of Physics and Electronic Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China); Bian, Xiaohai; Gong, Mingjie [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China)

2016-12-15

Ni{sub 45}Mn{sub 36.6}In{sub 13.4}Co{sub 5} magnetic shape memory alloy was successfully produced as preferentially textured ribbon by melting spinning with different wheel speed. X-ray diffraction (XRD) and electron back scatter diffraction (EBSD) were used to study structure and texture evolution of these melt-spun ribbons. The thickness of melt-spun ribbon is 42 μm, 65 μm and 30 μm depending on wheel speed of 1 0 m/s, 15 m/s and 20 m/s, respectively. Density of α fiber texture (〈100〉//ND) vary with wheel speed changes, and is most intensive in the ribbon with wheel speed of 15 m/s. Grains of the ribbons grow after being annealed at 873 K, 973 K, 1073 K and 1173 K, recrystallization was not observed in ribbons after being annealed at 873 K but occurred in ribbons after being annealed at higher temperatures. The α fiber texture becomes weaker to some extent after annealing at different temperatures, due to new recrystallization texture formed at the process of annealing. - Highlights: •Sectional part of shape memory ribbon is firstly investigated by EBSD method. •Thickness and texture of ribbons vary with wheel speed. •Annealing temperature affect texture and microstructure evolution greatly. •Recrystallization textures were observed in ribbons after being annealed.

NRC Task Force report on review of the Federal/State program for regulation of commercial low-level radioactive waste burial grounds. Analysis of public comments

International Nuclear Information System (INIS)

1977-09-01

Correspondence after publication of NUREG-0217 in the Federal Register is listed by docket. A summary of the comments is given. Comments on the task force conclusions on federal/state roles, comprehensive regulator program, and need to study alternatives, provide adequate capacity, and avoid proliferation are analyzed. A breakdown of the comments of states, industry, and others on the task force conclusions and recommendations is tabulated

Gastrodia elata Bl. Attenuated learning deficits induced by forced-swimming stress in the inhibitory avoidance task and Morris water maze.

Science.gov (United States)

Chen, Pei-Ju; Liang, Keng-Chen; Lin, Hui-Chen; Hsieh, Ching-Liang; Su, Kuan-Pin; Hung, Mei-Chu; Sheen, Lee-Yan

2011-06-01

This study adopted the forced-swimming paradigm to induce depressive symptoms in rats and evaluated the effects on learning and memory processing. Furthermore, the effects of the water extract of Gastrodia elata Bl., a well-known Chinese traditional medicine, on amnesia in rats subjected to the forced-swimming procedure were studied. Rats were subjected to the forced-swimming procedure, and the inhibitory avoidance task and Morris water maze were used to assess learning and memory performance. The acquisition of the two tasks was mostly impaired after the 15-minute forced-swimming procedure. Administration of the water extract of G. elata Bl. for 21 consecutive days at a dosage of 0.5 or 1.0 g/kg of body weight significantly improved retention in the inhibitory avoidance test, and the lower dose showed a better effect than the higher one and the antidepressant fluoxetine (18 mg/kg of body weight). In the Morris water maze, the lower dose of the water extract of G. elata Bl. significantly improved retention by shortening escape latency in the first test session and increasing the time in searching the target zone during the probe test. These findings suggest that water extracts of G. elata Bl. ameliorate the learning and memory deficits induced by forced swimming.

BILATERAL GROUND REACTION FORCES AND JOINT MOMENTS FOR LATERAL SIDESTEPPING AND CROSSOVER STEPPING TASKS

Directory of Open Access Journals (Sweden)

William I. Sellers

2009-03-01

Full Text Available Racquet sports have high levels of joint injuries suggesting the joint loads during play may be excessive. Sports such as badminton employ lateral sidestepping (SS and crossover stepping (XS movements which so far have not been described in terms of biomechanics. This study examined bilateral ground reaction forces and three dimensional joint kinetics for both these gaits in order to determine the demands of the movements on the leading and trailing limb and predict the contribution of these movements to the occurrence of overuse injury of the lower limbs. A force platform and motion-analysis system were used to record ground reaction forces and track marker trajectories of 9 experienced male badminton players performing lateral SS, XS and forward running tasks at a controlled speed of 3 m·s-1 using their normal technique. Ground reaction force and kinetic data for the hip, knee and ankle were analyzed, averaged across the group and the biomechanical variables compared. In all cases the ground reaction forces and joint moments were less than those experienced during moderate running suggesting that in normal play SS and XS gaits do not lead to high forces that could contribute to increased injury risk. Ground reaction forces during SS and XS do not appear to contribute to the development of overuse injury. The distinct roles of the leading and trailing limb, acting as a generator of vertical force and shock absorber respectively, during the SS and XS may however contribute to the development of muscular imbalances which may ultimately contribute to the development of overuse injury. However it is still possible that faulty use of these gaits might lead to high loads and this should be the subject of future work

Task-space separation principle: a force-field approach to motion planning for redundant manipulators.

Science.gov (United States)

Tommasino, Paolo; Campolo, Domenico

2017-02-03

In this work, we address human-like motor planning in redundant manipulators. Specifically, we want to capture postural synergies such as Donders' law, experimentally observed in humans during kinematically redundant tasks, and infer a minimal set of parameters to implement similar postural synergies in a kinematic model. For the model itself, although the focus of this paper is to solve redundancy by implementing postural strategies derived from experimental data, we also want to ensure that such postural control strategies do not interfere with other possible forms of motion control (in the task-space), i.e. solving the posture/movement problem. The redundancy problem is framed as a constrained optimization problem, traditionally solved via the method of Lagrange multipliers. The posture/movement problem can be tackled via the separation principle which, derived from experimental evidence, posits that the brain processes static torques (i.e. posture-dependent, such as gravitational torques) separately from dynamic torques (i.e. velocity-dependent). The separation principle has traditionally been applied at a joint torque level. Our main contribution is to apply the separation principle to Lagrange multipliers, which act as task-space force fields, leading to a task-space separation principle. In this way, we can separate postural control (implementing Donders' law) from various types of tasks-space movement planners. As an example, the proposed framework is applied to the (redundant) task of pointing with the human wrist. Nonlinear inverse optimization (NIO) is used to fit the model parameters and to capture motor strategies displayed by six human subjects during pointing tasks. The novelty of our NIO approach is that (i) the fitted motor strategy, rather than raw data, is used to filter and down-sample human behaviours; (ii) our framework is used to efficiently simulate model behaviour iteratively, until it converges towards the experimental human strategies.

The Chief Clinical Informatics Officer (CCIO): AMIA Task Force Report on CCIO Knowledge, Education, and Skillset Requirements.

Science.gov (United States)

Kannry, Joseph; Sengstack, Patricia; Thyvalikakath, Thankam Paul; Poikonen, John; Middleton, Blackford; Payne, Thomas; Lehmann, Christoph U

2016-01-01

The emerging operational role of the "Chief Clinical Informatics Officer" (CCIO) remains heterogeneous with individuals deriving from a variety of clinical settings and backgrounds. The CCIO is defined in title, responsibility, and scope of practice by local organizations. The term encompasses the more commonly used Chief Medical Informatics Officer (CMIO) and Chief Nursing Informatics Officer (CNIO) as well as the rarely used Chief Pharmacy Informatics Officer (CPIO) and Chief Dental Informatics Officer (CDIO). The American Medical Informatics Association (AMIA) identified a need to better delineate the knowledge, education, skillsets, and operational scope of the CCIO in an attempt to address the challenges surrounding the professional development and the hiring processes of CCIOs. An AMIA task force developed knowledge, education, and operational skillset recommendations for CCIOs focusing on the common core aspect and describing individual differences based on Clinical Informatics focus. The task force concluded that while the role of the CCIO currently is diverse, a growing body of Clinical Informatics and increasing certification efforts are resulting in increased homogeneity. The task force advised that 1.) To achieve a predictable and desirable skillset, the CCIO must complete clearly defined and specified Clinical Informatics education and training. 2.) Future education and training must reflect the changing body of knowledge and must be guided by changing day-to-day informatics challenges. A better defined and specified education and skillset for all CCIO positions will motivate the CCIO workforce and empower them to perform the job of a 21st century CCIO. Formally educated and trained CCIOs will provide a competitive advantage to their respective enterprise by fully utilizing the power of Informatics science.

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material

Energy Technology Data Exchange (ETDEWEB)

Gu, X N; Zhou, W R; Zheng, Y F [State Key Laboratory for Turbulence and Complex System and Department of Advanced Materials and Nanotechnology, College of Engineering, Peking University, Beijing 100871 (China); Li, X L [Center for Biomedical Materials and Engineering, Harbin Engineering University, Harbin 150001 (China); Cheng, Y, E-mail: yfzheng@pku.edu.c [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China)

2010-06-01

Rapidly solidified (RS) Mg-3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s{sup -1}, 30 m s{sup -1} and 45 m s{sup -1}) with the as-cast Mg-3Ca alloy ingot as a raw material. The RS45 Mg-3Ca alloy ribbon showed a much more fine grain size feature (approximately 200-500 nm) in comparison to the coarse grain size (50-100 {mu}m) of the original as-cast Mg-3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg-3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds (1.43 mm yr{sup -1} for RS15, 0.94 mm yr{sup -1} for RS30 and 0.36 mm yr{sup -1} for RS45). The RS Mg-3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg-3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg-3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells, whereas the as-cast Mg-3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg-3Ca alloy ribbons than that of the as-cast Mg-3Ca alloy ingot.

Report of an ESC-EAPCI Task Force on the evaluation and use of bioresorbable scaffolds for percutaneous coronary intervention: executive summary.

Science.gov (United States)

Byrne, Robert A; Stefanini, Giulio G; Capodanno, Davide; Onuma, Yoshinobu; Baumbach, Andreas; Escaned, Javier; Haude, Michael; James, Stefan; Joner, Michael; Jüni, Peter; Kastrati, Adnan; Oktay, Semih; Wijns, William; Serruys, Patrick W; Windecker, Stephan

2018-05-07

A previous Task Force of the European Society of Cardiology (ESC) and European Association of Percutaneous Cardiovascular Interventions (EAPCI) provided a report on recommendations for the non-clinical and clinical evaluation of coronary stents. Following dialogue with the European Commission, the Task Force was asked to prepare an additional report on the class of devices known as bioresorbable scaffolds (BRS). Five BRS have CE-mark approval for use in Europe. Only one device-the Absorb bioresorbable vascular scaffold-has published randomized clinical trial data and this data show inferior outcomes to conventional drug-eluting stents (DES) at 2-3 years. For this reason, at present BRS should not be preferred to conventional DES in clinical practice. The Task Force recommends that new BRS devices should undergo systematic non-clinical testing according to standardized criteria prior to evaluation in clinical studies. A clinical evaluation plan should include data from a medium sized, randomized trial against DES powered for a surrogate end point of clinical efficacy. Manufacturers of successful devices receive CE-mark approval for use and must have an approved plan for a large-scale randomized clinical trial with planned long-term follow-up.

The Use of Rapid Review Methods for the U.S. Preventive Services Task Force.

Science.gov (United States)

Patnode, Carrie D; Eder, Michelle L; Walsh, Emily S; Viswanathan, Meera; Lin, Jennifer S

2018-01-01

Rapid review products are intended to synthesize available evidence in a timely fashion while still meeting the needs of healthcare decision makers. Various methods and products have been applied for rapid evidence syntheses, but no single approach has been uniformly adopted. Methods to gain efficiency and compress the review time period include focusing on a narrow clinical topic and key questions; limiting the literature search; performing single (versus dual) screening of abstracts and full-text articles for relevance; and limiting the analysis and synthesis. In order to maintain the scientific integrity, including transparency, of rapid evidence syntheses, it is imperative that procedures used to streamline standard systematic review methods are prespecified, based on sound review principles and empiric evidence when possible, and provide the end user with an accurate and comprehensive synthesis. The collection of clinical preventive service recommendations maintained by the U.S. Preventive Services Task Force, along with its commitment to rigorous methods development, provide a unique opportunity to refine, implement, and evaluate rapid evidence synthesis methods and add to an emerging evidence base on rapid review methods. This paper summarizes the U.S. Preventive Services Task Force's use of rapid review methodology, its criteria for selecting topics for rapid evidence syntheses, and proposed methods to streamline the review process. Copyright © 2018 American Journal of Preventive Medicine. All rights reserved.

Attainment and retention of force moderation following laparoscopic resection training with visual force feedback.

Science.gov (United States)

Hernandez, Rafael; Onar-Thomas, Arzu; Travascio, Francesco; Asfour, Shihab

2017-11-01

Laparoscopic training with visual force feedback can lead to immediate improvements in force moderation. However, the long-term retention of this kind of learning and its potential decay are yet unclear. A laparoscopic resection task and force sensing apparatus were designed to assess the benefits of visual force feedback training. Twenty-two male university students with no previous experience in laparoscopy underwent relevant FLS proficiency training. Participants were randomly assigned to either a control or treatment group. Both groups trained on the task for 2 weeks as follows: initial baseline, sixteen training trials, and post-test immediately after. The treatment group had visual force feedback during training, whereas the control group did not. Participants then performed four weekly test trials to assess long-term retention of training. Outcomes recorded were maximum pulling and pushing forces, completion time, and rated task difficulty. Extreme maximum pulling force values were tapered throughout both the training and retention periods. Average maximum pushing forces were significantly lowered towards the end of training and during retention period. No significant decay of applied force learning was found during the 4-week retention period. Completion time and rated task difficulty were higher during training, but results indicate that the difference eventually fades during the retention period. Significant differences in aptitude across participants were found. Visual force feedback training improves on certain aspects of force moderation in a laparoscopic resection task. Results suggest that with enough training there is no significant decay of learning within the first month of the retention period. It is essential to account for differences in aptitude between individuals in this type of longitudinal research. This study shows how an inexpensive force measuring system can be used with an FLS Trainer System after some retrofitting. Surgical