ON THE GEOMETRY OF THE IBEX RIBBON

Energy Technology Data Exchange (ETDEWEB)

Sylla, Adama; Fichtner, Horst [Institut für Theoretische Physik IV, Ruhr-Universität Bochum, D-44780 Bochum (Germany)

2015-10-01

The Energetic Neutral Atom (ENA) full-sky maps obtained with the Interstellar Boundary Explorer (IBEX) show an unexpected bright narrow band of increased intensity. This so-called ENA ribbon results from charge exchange of interstellar neutral atoms with protons in the outer heliosphere or beyond. Among other hypotheses it has been argued that this ribbon may be related to a neutral density enhancement, or H-wave, in the local interstellar medium. Here we quantitatively demonstrate, on the basis of an analytical model of the principal large-scale heliospheric structure, that this scenario for the ribbon formation leads to results that are fully consistent with the observed location of the ribbon in the full-sky maps at all energies detected with high-energy sensor IBEX-Hi.

Tolerance of brightness and contrast adjustments on chronic apical abscess and apical granuloma interpretation

Science.gov (United States)

Purnamasari, L.; Iskandar, H. H. B.; Makes, B. N.

2017-08-01

In digitized radiography techniques, adjusting the image enhancement can improve the subjective image quality by optimizing the brightness and contrast for diagnostic needs. To determine the value range of image enhancement (brightness and contrast) on chronic apical abscess and apical granuloma interpretation. 30 periapical radiographs that diagnosed chronic apical abscess and 30 that diagnosed apical granuloma were adjusted by changing brightness and contrast values. The value range of brightness and contrast adjustment that can be tolerated in radiographic interpretations of chronic apical abscess and apical granuloma spans from -10 to +10. Brightness and contrast adjustments on digital radiographs do not affect the radiographic interpretation of chronic apical abscess and apical granuloma if conducted within the value range.

Observations and Numerical Modeling of the Jovian Ribbon

Science.gov (United States)

Cosentino, R. G.; Simon, A.; Morales-Juberias, R.; Sayanagi, K. M.

2015-01-01

Multiple wavelength observations made by the Hubble Space Telescope in early 2007 show the presence of a wavy, high-contrast feature in Jupiter's atmosphere near 30 degrees North. The "Jovian Ribbon," best seen at 410 nanometers, irregularly undulates in latitude and is time-variable in appearance. A meridional intensity gradient algorithm was applied to the observations to track the Ribbon's contour. Spectral analysis of the contour revealed that the Ribbon's structure is a combination of several wavenumbers ranging from k equals 8-40. The Ribbon is a dynamic structure that has been observed to have spectral power for dominant wavenumbers which vary over a time period of one month. The presence of the Ribbon correlates with periods when the velocity of the westward jet at the same location is highest. We conducted numerical simulations to investigate the stability of westward jets of varying speed, vertical shear, and background static stability to different perturbations. A Ribbon-like morphology was best reproduced with a 35 per millisecond westward jet that decreases in amplitude for pressures greater than 700 hectopascals and a background static stability of N equals 0.005 per second perturbed by heat pulses constrained to latitudes south of 30 degrees North. Additionally, the simulated feature had wavenumbers that qualitatively matched observations and evolved throughout the simulation reproducing the Jovian Ribbon's dynamic structure.

The ribbon microphone - an educational aid: use of a ribbon microphone to teach multi-discipline computer simulation skills

CSIR Research Space (South Africa)

Van Wyk, Marius

2016-07-01

Full Text Available The ribbon microphone serves as an excellent aid to learn computer simulation and computational skills. Simulation of this seemingly simple device is all but trivial. The ribbon microphone is an all-in-one example for simulations in acoustics...

Electrostatics-Driven Hierarchical Buckling of Charged Flexible Ribbons.

Science.gov (United States)

Yao, Zhenwei; Olvera de la Cruz, Monica

2016-04-08

We investigate the rich morphologies of an electrically charged flexible ribbon, which is a prototype for many beltlike structures in biology and nanomaterials. Long-range electrostatic repulsion is found to govern the hierarchical buckling of the ribbon from its initially flat shape to its undulated and out-of-plane twisted conformations. In this process, the screening length is the key controlling parameter, suggesting that a convenient way to manipulate the ribbon morphology is simply to change the salt concentration. We find that these shapes originate from the geometric effect of the electrostatic interaction, which fundamentally changes the metric over the ribbon surface. We also identify the basic modes by which the ribbon reshapes itself in order to lower the energy. The geometric effect of the physical interaction revealed in this Letter has implications for the shape design of extensive ribbonlike materials in nano- and biomaterials.

Carbon nanotube fiber spun from wetted ribbon

Science.gov (United States)

Zhu, Yuntian T; Arendt, Paul; Zhang, Xiefei; Li, Qingwen; Fu, Lei; Zheng, Lianxi

2014-04-29

A fiber of carbon nanotubes was prepared by a wet-spinning method involving drawing carbon nanotubes away from a substantially aligned, supported array of carbon nanotubes to form a ribbon, wetting the ribbon with a liquid, and spinning a fiber from the wetted ribbon. The liquid can be a polymer solution and after forming the fiber, the polymer can be cured. The resulting fiber has a higher tensile strength and higher conductivity compared to dry-spun fibers and to wet-spun fibers prepared by other methods.

Apical cap

International Nuclear Information System (INIS)

McLoud, T.C.; Isler, R.J.; Novelline, R.A.; Putman, C.E.; Simeone, J.; Stark, P.

1981-01-01

Apical caps, either unilateral or bilateral, are a common feature of advancing age and are usually the result of subpleural scarring unassociated with other diseases. Pancoast (superior sulcus) tumors are a well recognized cause of unilateral asymmetric apical density. Other lesions arising in the lung, pleura, or extrapleural space may produce unilateral or bilateral apical caps. These include: (1) inflammatory: tuberculosis and extrapleural abscesses extending from the neck; (2) post radiation fibrosis after mantle therapy for Hodgkin disease or supraclavicular radiation in the treatment of breast carcinoma; (3) neoplasm: lymphoma extending from the neck or mediastinum, superior sulcus bronchogenic carcinoma, and metastases; (4) traumatic: extrapleural dissection of blood from a ruptured aorta, fractures of the ribs or spine, or hemorrhage due to subclavian line placement; (5) vascular: coarctation of the aorta with dilated collaterals over the apex, fistula between the subclavian artery and vein; and (6) miscellaneous: mediastinal lipomatosis with subcostal fat extending over the apices

A Comparative Study of Apical Healing of Open Apices Using MTA and Ca(OH2 Apical Plugs in Cats

Directory of Open Access Journals (Sweden)

M. H. Zarrabi

2005-06-01

Full Text Available Statement of problem: Endodontic treatment of necrotic teeth with open apices is a challenge. After ruling out surgery as a treatment scheme and introduction of the multivisit apexification which in turn had its disadvantages, apical plug seems to be a suitable substitute treatment plan for such cases. Apical plug makes the treatment through formation of a barrier against the obturating material in a single visit.Purpose: The purpose of this study was to compare histologically the periapical healing using MTA and calcium hydroxide apical plugs after intervals of 4 and 12 weeks in cats.Materials and Methods: In this clinical trial study 64 canines of 16 healthy and mature cats were divided into 3 groups after a periapical lesion formation by over instrumentation in the apical area with files up to no.120. The first group included 24 teeth on which MTA apical plug was applied. The second group included 24 teeth on which Ca (OH 2 apical plug was applied. In both groups the canals were filled with gutta percha and sealer. The third group included 16 control teeth whose canals were left empty after instrumentation and debridement. The access cavities of all teeth were sealed with varnish and amalgam and the vital perfusion of cats was performed in 4 and 12 week intervals. Statistical analysis was established by χ2 and independence test.Results: After 4 weeks, periapical healing in the first group was 90%, in the second group 80% and in the third group, it was only 12.5 %. After 12 weeks, periapical healing occurred in 100% of the MTA group, while it was 57.1% in the second and 40%in the third group .Generally, in the study of histological parameters of healing, no statistical significant difference was observed between the 2 experimental groups,although the MTA group results were much better than the Ca (OH 2 group especially at 12 weeks.Conclusion: The use of MTA apical plug is more effective than Ca (OH 2 in treatment of necrotic teeth with open

Magnetic and sensitive magnetoelastic properties of Finemet nanostructured ribbon

International Nuclear Information System (INIS)

Pham Duc Thang; Hoang Hai Duong; Nguyen Hoang Nghi

2009-01-01

Soft-magnetic Fe 73.5 Cu 1 Nb 3 Si 13.5 B 9 (Finemet) ribbon has been fabricated by using melt-spinning techniques. After annealing at suitable temperature the ribbon changes from an amorphous to crystalline state which related to the formation of Fe nanocrystallites. Study on the magnetic and magnetoelastic properties of the ribbon is presented. Furthermore, based on the fabricated ribbon stress sensors are simply constructed. The sensors showed high sensitivity of 3.8 mV/MPa as well as a wide working range up to 17 MPa. These sensors are potential for practical applications such as detecting small stress and movement in civil structures.

Wrinkles, loops, and topological defects in twisted ribbons

Science.gov (United States)

Chopin, Julien

Nature abounds with elastic ribbon like shapes including double-stranded semiflexible polymers, graphene and metal oxide nanoribbons which are examples of elongated elastic structures with a strongly anisotropic cross-section. Due to this specific geometry, it is far from trivial to anticipate if a ribbon should be considered as a flat flexible filament or a narrow thin plate. We thus perform an experiment in which a thin elastic ribbon is loaded using a twisting and traction device coupled with a micro X-ray computed tomography machine allowing a full 3D shape reconstruction. A wealth of morphological behaviors can be observed including wrinkled helicoids, curled and looped configurations, and faceted ribbons. In this talk, I will show that most morphologies can be understood using a far-from-threshold approach and simple scaling arguments. Further, we find that the various shapes can be organized in a phase diagram using the twist, the tension, and the geometry of the ribbon as control parameters. Finally, I will discuss the spontaneous formation of topological defects with negatively-signed Gaussian charge at large twist and small but finite stretch.

Modeling of inter-ribbon tunneling in graphene

OpenAIRE

Van de Put, Maarten L.; Vandenberghe, William G.; Sorée, Bart; Magnus, Wim; Fischetti, Massimo

2015-01-01

The tunneling current between two crossed graphene ribbons is described invoking the empirical pseudopotential approximation and the Bardeen transfer Hamiltonian method. Results indicate that the density of states is the most important factor determining the tunneling current between small (nm) ribbons. The quasi-one dimensional nature of graphene nanoribbons is shown to result in resonant tunneling.

Dosimetry of wires and single ribbons of Iridium 192; Dosimetria de alambres y ribbons individuales de Iridio-192

Energy Technology Data Exchange (ETDEWEB)

Mazzucco, L.D. [Centro Medico Nuclear S.R.L. San Juan (Argentina)

1998-12-31

The objective of this work is in order to present in table formats the dosimetry of wires and single ribbons of Iridium with lengths 1-12 cm for each one linear source along the bisector which is perpendicular at tissue sources (water) computed for linear activity 1 mCi/cm in the case of wires, and 1 mCi/seed for ribbons. The above tables are of direct use, adaptable at particular cases so they facilitate logarithmic graphics of doses in function of the distance for interpolation and use in the treatments planning. It was shown that for two sources with identical linear activity and total length, one of the equidistant seeds at 1 cm (ribbon) and one wire on the other hand, the differences in dose rates in near positions can be about the 15% so corroborating that it is not possible to use wire tables for seeds neither vice versa. Moreover it was elaborated tables of practical direct use for dose rate in water at c Gy/hr for wires and Ribbons 1-12 cm length and from 0.5-10 cm of distance in the perpendicular bisector at the Iridium implant. (Author)

Electronic properties and mechanical strength of β-phosphorene nano-ribbons

Energy Technology Data Exchange (ETDEWEB)

Swaroop, Ram; Bhatia, Pradeep; Kumar, Ashok, E-mail: ashok@cup.ac.in [Centre for Physical Sciences, School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India-151001 (India)

2016-05-06

We have performed first principles calculations to find out the effect of mechanical strain on the electronic properties of zig-zag edged nano ribbons of β-phosphorene. It is found that electronic band-gap get opened-up to 2.61 eV by passivation of the edges of ribbons. Similarly, the mechanical strength is found to be increase from 1.75 GPa to 2.65 GPa on going from unpassivated nano ribbons to passivated ones along with the 2% increase in ultimate tensile strain. The band-gap value of passivated ribbon gets decreased to 0.43 eV on applying strain up to which the ribbon does not break. These tunable properties of β-phospherene with passivation with H-atom and applying mechanical strain offer its use in tunable nano electronics.

Structure and magnetic properties of Alnico ribbons

Science.gov (United States)

Zhang, Ce; Li, Ying; Han, Xu-Hao; Du, Shuai-long; Sun, Ji-bing; Zhang, Ying

2018-04-01

Al-Ni-Co alloy has been widely applied in various industrial fields due to its excellent thermal and magnetic stability. In this paper, new Al-Ni-Co ribbons are prepared by simple processes combining melt-spinning with annealing, and their phase transition, microstructure and magnetic properties are studied. The results show that after as-spun ribbons are annealed, the grain size of ribbons increases from 1.1 ± 0.3 μm to 4.8 ± 0.8 μm, but still much smaller than that of the bulk Al-Ni-Co alloy manufactured by traditional technologies. In addition, some rod-like Al70Co20Ni10-type, Al9Co2-type and Fe2Nb-type phases are precipitated at grain boundaries; simultaneously, the distinct spinodal decomposition microstructure with periodic ingredient variation is thoroughly formed in all grains by the reaction of α → α1 + α2. Furthermore, the α1 and α2 distribute alternately like a maze, the Fe-Co-rich α1 phase holds 35.9-47.3 vol%, while the Al-Ni-rich α2 phase occupies the rest. Finally, the coercivity of annealed ribbons can reach to 485.3 ± 76.6 Oe. If the annealed ribbons are further aged at 560 °C, their Hc even increases to 738.1 ± 81.0 Oe. The coercivity mechanism is discussed by the combination of microstructure and domain structure.

Synaptic ribbon. Conveyor belt or safety belt?

Science.gov (United States)

Parsons, T D; Sterling, P

2003-02-06

The synaptic ribbon in neurons that release transmitter via graded potentials has been considered as a conveyor belt that actively moves vesicles toward their release sites. But evidence has accumulated to the contrary, and it now seems plausible that the ribbon serves instead as a safety belt to tether vesicles stably in mutual contact and thus facilitate multivesicular release by compound exocytosis.

Relationship between the Apical Preparation Diameter and the Apical Seal: An In Vitro Study

Directory of Open Access Journals (Sweden)

Kaoutar Laslami

2018-01-01

Full Text Available Objectives. The aim of the study is to define the relationship between the apical preparation diameter and the apical sealing ability to highlight the importance of the preservation of the diameter and the original position of the apical foramen. Materials and Methods. 50 extracted maxillary incisors were randomly allocated into three groups of 15 teeth each (n = 15 according to the apical preparation size: Group 1: finishing file F1 corresponding to size 20 reached the working length (ProTaper Universal system Dentsply®; Group 2: prepared up to size 30 corresponding to finishing file F30; Group 3: prepared up to size 50 corresponding to finishing file F5. Five teeth were assigned to positive and negative control groups. After the filling of the root canals, the teeth were isolated and immersed in a dye solution, then cut longitudinally, photographed, and the dye penetration were calculated using a computer software. Results. Comparison of the three different apical preparation sizes showed no statistically significant differences regarding the apical microleakage. Conclusion. The most important value of the dye penetration was observed in the group with the largest apical diameter.

Apical instrumentation in endodontic therapy

Directory of Open Access Journals (Sweden)

Kurniasri Darliana

2007-07-01

Full Text Available Cleaning and shaping of the root canal as the foundation for successful endodontic therapy. Cleaning of the root canal as the removal of all the contents of the root canal systems before and during shaping. Mechanical cleaning as the most important part of the root canal therapy. Instrumentation of the apical region has long been considered to be an essential component in the cleaning and shaping process. The apical area as the critical zone for instrumentation. The apical portion of the root canal system can retain microorganisms that could potentially cause periradicular inflammation. The nickel-titanium rotary instrumentation system to facilitate the cleaning and shaping process. Larger instrumentation sizes not only allow proper irrigation but also significantly decrease remaining bacteria in the canal system. How the larger apical sizes preparation must be achieved to clinical success. This paper will describe the major factors impacting the selection of final apical size, the factors are the anatomy of the apical constriction, root canal diameter, apical instrumentation, and bacteria in dentin tubuli.

Nanostructure and magnetic properties of Ni-substituted finemet ribbons

International Nuclear Information System (INIS)

Iturriza, N.; Fernandez, L.; Ipatov, M.; Vara, G.; Pierna, A.R.; Val, J.J. del; Chizhik, A.; Gonzalez, J.

2007-01-01

Magnetic anisotropy has been induced during the nanocrystallization process of Ni-rich amorphous ferromagnetic (Finemet) ribbons by means of the application of a constant stress during the annealing process. Magnetization measurements have evidenced the anisotropy of the treated samples. The main goal of this work was the analysis of the treated ribbons using X-ray Diffraction (XRD), Transmission Electronic Microscopy (TEM) and Atomic Force Microscopy (AFM). AFM measurements revealed in all the cases a strong nanocrystallisation of the surface without evidences of amorphous matrix, which contrast with XRD and TEM measurements that have shown a high content of amorphous phase in the bulk of the ribbons. Magneto-optical Kerr effect measurements show much higher coercive field values than in the bulk, indicating a complex magnetic behavior for the surface of the ribbons

Blue Ribbon Panel Report

Science.gov (United States)

An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

Decade of PV Industry R and D Advances in Silicon Module Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Symko-Davis, M.; Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Laboratory; King, R.[U.S. Department of Energy; Ruby, D.S. [Sandia National Laboratories

2001-01-18

The US Photovoltaic (PV) industry has made significant technical advances in crystalline silicon (Si) module manufacturing through the PV Manufacturing R and D Project during the past decade. Funded Si technologies in this project have been Czochralski, cast polycrystalline, edge-defined film-fed growth (EFG) ribbon, string ribbon, and Si-film. Specific R and D Si module-manufacturing categories that have shown technical growth and will be discussed are in crystal growth and processing, wafering, cell fabrication, and module manufacturing. These R and D advancements since 1992 have contributed to a 30% decrease in PV manufacturing costs and stimulated a sevenfold increase in PV production capacity.

THE NATURE OF FLARE RIBBONS IN CORONAL NULL-POINT TOPOLOGY

International Nuclear Information System (INIS)

Masson, S.; Aulanier, G.; Pariat, E.; Schrijver, C. J.

2009-01-01

Flare ribbons are commonly attributed to the low-altitude impact, along the footprints of separatrices or quasi-separatrix layers (QSLs), of particle beams accelerated through magnetic reconnection. If reconnection occurs at a three-dimensional coronal magnetic null point, the footprint of the dome-shaped fan surface would map a closed circular ribbon. This paper addresses the following issues: does the entire circular ribbon brighten simultaneously, as expected because all fan field lines pass through the null point? And since the spine separatrices are singular field lines, do spine-related ribbons look like compact kernels? What can we learn from these observations about current sheet formation and magnetic reconnection in a null-point topology? The present study addresses these questions by analyzing Transition Region and Coronal Explorer and Solar and Heliospheric Observatory/Michelson Doppler Imager observations of a confined flare presenting a circular ribbon. Using a potential field extrapolation, we linked the circular shape of the ribbon with the photospheric mapping of the fan field lines originating from a coronal null point. Observations show that the flare ribbon outlining the fan lines brightens sequentially along the counterclockwise direction and that the spine-related ribbons are elongated. Using the potential field extrapolation as initial condition, we conduct a low-β resistive magnetohydrodynamics simulation of this observed event. We drive the coronal evolution by line-tied diverging boundary motions, so as to emulate the observed photospheric flow pattern associated with some magnetic flux emergence. The numerical analysis allows us to explain several observed features of the confined flare. The vorticity induced in the fan by the prescribed motions causes the spines to tear apart along the fan. This leads to formation of a thin current sheet and induces null-point reconnection. We also find that the null point and its associated topological

Black Silicon Solar Cells with Black Ribbons

DEFF Research Database (Denmark)

Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

2016-01-01

We present the combination of mask-less reactive ion etch (RIE) texturing and blackened interconnecting ribbons as a method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon made by mask-less reactive ion etching has total, average...... in the range 15.7-16.3%. The KOH-textured reference cell had an efficiency of 17.9%. The combination of black Si and black interconnecting ribbons may result in aesthetic, all-black panels based on conventional, front-contacted silicon solar cells....... reflectance below 0.5% across a 156x156 mm2 silicon (Si) wafer. Black interconnecting ribbons were realized by oxidizing copper resulting in reflectance below 3% in the visible wavelength range. Screen-printed Si solar cells were realized on 156x156 mm2 black Si substrates with resulting efficiencies...

Generation Mechanisms of Quasi-parallel and Quasi-circular Flare Ribbons in a Confined Flare

Energy Technology Data Exchange (ETDEWEB)

Hernandez-Perez, Aaron; Thalmann, Julia K.; Veronig, Astrid M.; Dickson, Ewan C. [IGAM/Institute of Physics, University of Graz, A-8010 Graz (Austria); Su, Yang [Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory Chinese Academy of Sciences, 2 West Beijing Road, 210008 Nanjing (China); Gömöry, Peter, E-mail: aaron.hernandez-perez@uni-graz.at [Astronomical Institute, Slovak Academy of Sciences, 05960 Tatranská Lomnica (Slovakia)

2017-10-01

We analyze a confined multiple-ribbon M2.1 flare (SOL2015-01-29T11:42) that originated from a fan-spine coronal magnetic field configuration, within active region NOAA 12268. The observed ribbons form in two steps. First, two primary ribbons form at the main flare site, followed by the formation of secondary ribbons at remote locations. We observe a number of plasma flows at extreme-ultraviolet temperatures during the early phase of the flare (as early as 15 minutes before the onset) propagating toward the formation site of the secondary ribbons. The secondary ribbon formation is co-temporal with the arrival of the pre-flare generated plasma flows. The primary ribbons are co-spatial with Ramaty High Energy Spectroscopic Imager ( RHESSI ) hard X-ray sources, whereas no enhanced X-ray emission is detected at the secondary ribbon sites. The (E)UV emission, associated with the secondary ribbons, peaks ∼1 minute after the last RHESSI hard X-ray enhancement. A nonlinear force-free model of the coronal magnetic field reveals that the secondary flare ribbons are not directly connected to the primary ribbons, but to regions nearby. Detailed analysis suggests that the secondary brightenings are produced due to dissipation of kinetic energy of the plasma flows (heating due to compression), and not due to non-thermal particles accelerated by magnetic reconnection, as is the case for the primary ribbons.

Plastic deformation of silicon dendritic web ribbons during the growth

Science.gov (United States)

Cheng, L. J.; Dumas, K. A.; Su, B. M.; Leipold, M. H.

1984-01-01

The distribution of slip dislocations in silicon dendritic web ribbons due to plastic deformation during the cooling phase of the growth was studied. The results show the existence of two distinguishable stress regions across the ribbon formed during the plastic deformation stage, namely, shear stress at the ribbon edges and tensile stress at the middle. In addition, slip dislocations caused by shear stress near the edges appear to originate at the twin plane.

Flare Ribbons Approach Observed by the Interface Region Imaging Spectrograph and the Solar Dynamics Observatory

Energy Technology Data Exchange (ETDEWEB)

Li, Ting; Zhang, Jun; Hou, Yijun, E-mail: liting@nao.cas.cn [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China)

2017-10-10

We report flare ribbons approach (FRA) during a multiple-ribbon M-class flare on 2015 November 4 in NOAA AR 12443, obtained by the Interface Region Imaging Spectrograph and the Solar Dynamics Observatory. The flare consisted of a pair of main ribbons and two pairs of secondary ribbons. The two pairs of secondary ribbons were formed later than the appearance of the main ribbons, with respective time delays of 15 and 19 minutes. The negative-polarity main ribbon spread outward faster than the first secondary ribbon with the same polarity in front of it, and thus the FRA was generated. Just before their encounter, the main ribbon was darkening drastically and its intensity decreased by about 70% in 2 minutes, implying the suppression of main-phase reconnection that produced two main ribbons. The FRA caused the deflection of the main ribbon to the direction of secondary ribbon with a deflection angle of about 60°. A post-approach arcade was formed about 2 minutes later and the downflows were detected along the new arcade with velocities of 35–40 km s{sup −1}, indicative of the magnetic restructuring during the process of FRA. We suggest that there are three topological domains with footpoints outlined by the three pairs of ribbons. Close proximity of these domains leads to deflection of the ribbons, which is in agreement with the magnetic field topology.

Systemic antibiotics for symptomatic apical periodontitis and acute apical abscess in adults.

Science.gov (United States)

Cope, Anwen; Francis, Nick; Wood, Fiona; Mann, Mala K; Chestnutt, Ivor G

2014-06-26

Dental pain can have a considerable detrimental effect on an individual's quality of life. Symptomatic apical periodontitis and acute apical abscess are common causes of dental pain and arise from an inflamed or necrotic dental pulp, or infection of the pulpless root canal system. Clinical guidelines recommend that the first-line treatment for teeth with symptomatic apical periodontitis or an acute apical abscess should be removal of the source of inflammation or infection by local, operative measures, and that systemic antibiotics are currently only recommended for situations where there is evidence of spreading infection (cellulitis, lymph node involvement, diffuse swelling) or systemic involvement (fever, malaise). Despite this, there is evidence that dentists continue to prescribe antibiotics for these conditions. There is concern that this could contribute to the development of antibiotic-resistant bacterial colonies both within the individual and within the community as a whole. To evaluate the effects of systemic antibiotics provided with or without surgical intervention (such as extraction, incision and drainage of a swelling or endodontic treatment), with or without analgesics, for symptomatic apical periodontitis or acute apical abscess in adults. We searched the following electronic databases: Cochrane Oral Health Group's Trials Register (to 1 October 2013); Cochrane Central Register of Controlled Trials (The Cochrane Library 2013, Issue 9); MEDLINE via OVID (1946 to 1 October 2013); EMBASE via OVID (1980 to 1 October 2013) and CINAHL via EBSCO (1980 to 1 October 2013). We searched the World Health Organization (WHO) International Trials Registry Platform and the US National Institutes of Health Trials Registry (ClinicalTrials.gov) on 1 October 2013 to identify ongoing trials. We searched for grey literature using OpenGrey (to 1 October 2013) and ZETOC Conference Proceedings (1993 to 1 October 2013). We placed no restrictions on the language or date of

After the Ribbon Cutting

DEFF Research Database (Denmark)

Hodge, Graeme A.; Boulot, Emille; Duffield, Colin

2017-01-01

Much attention has gone towards ‘up-front’ processes when delivering infrastructure public–private partnerships (PPPs), but less on how to best govern after the ribbon is cut and the infrastructure built. This paper identifies the primary contractual and institutional governance challenges arising...

Position of the IBEX ribbon as a key to understand its origin

Science.gov (United States)

Swaczyna, Pawel; Bzowski, Maciej; Sokół, Justyna M.; Christian, Eric R.; Funsten, Herbert O.; McComas, David J.; Schwadron, Nathan A.

2017-04-01

Observations of the energetic neutral atom (ENA) emission by the Interstellar Boundary Explorer (IBEX) allow for remote sensing of the plasma properties in heliosheath. The first IBEX results revealed an unexpected arc-like enhancement of the ENA flux in the sky, dubbed the IBEX ribbon. This discovery led to formulation of more than a dozen hypotheses on its origin. The emission source region proposed in these hypotheses span the heliospheric termination shock up to a hypothetical nearby interface between the Local Interstellar Cloud and a local bay in the Local Bubble. Among these hypotheses is the concept that the ribbon is produced by the secondary ENA mechanism, operating in the outer heliosheath. The observational strategy of IBEX allows observation of the same part of the sky from the opposite sides of the Sun every six months and thus provides parallax viewing with a baseline of 2 AU. After correcting the observations for the Compton-Getting effect and for gravitational deflection and radiation pressure, we use this parallax viewing to precisely determine the apparent position of the maximum flux associated with the ribbon. We find that the ribbon peak position differs semi-annually by an angle of 0.41±0.15 deg, which we interpret as the parallax effect. This angle corresponds to a distance of 140-38+84 AU, and thus suggests that most likely the ribbon's source is located just beyond the heliopause. Comparison of the IBEX ribbon position in five energy steps of IBEX-Hi shows a systematic shift, which changes the position of the ribbon center by ˜10 deg. We find that it can be explained using an analytic model of the secondary ENA mechanism with the neutralized supersonic solar wind as the source of the primary ENAs, which are ionized in the outer heliosheath, picked up by the ambient magnetic field, and eventually re-neutralized (as originally conceived, McComas et al. 2009). We use a realistic model of the solar wind evolution dependent on heliographic

Mena–GRASP65 interaction couples actin polymerization to Golgi ribbon linking

Science.gov (United States)

Tang, Danming; Zhang, Xiaoyan; Huang, Shijiao; Yuan, Hebao; Li, Jie; Wang, Yanzhuang

2016-01-01

In mammalian cells, the Golgi reassembly stacking protein 65 (GRASP65) has been implicated in both Golgi stacking and ribbon linking by forming trans-oligomers through the N-terminal GRASP domain. Because the GRASP domain is globular and relatively small, but the gaps between stacks are large and heterogeneous, it remains puzzling how GRASP65 physically links Golgi stacks into a ribbon. To explore the possibility that other proteins may help GRASP65 in ribbon linking, we used biochemical methods and identified the actin elongation factor Mena as a novel GRASP65-binding protein. Mena is recruited onto the Golgi membranes through interaction with GRASP65. Depleting Mena or disrupting actin polymerization resulted in Golgi fragmentation. In cells, Mena and actin were required for Golgi ribbon formation after nocodazole washout; in vitro, Mena and microfilaments enhanced GRASP65 oligomerization and Golgi membrane fusion. Thus Mena interacts with GRASP65 to promote local actin polymerization, which facilitates Golgi ribbon linking. PMID:26538023

The status of silicon ribbon growth technology for high-efficiency silicon solar cells

Science.gov (United States)

Ciszek, T. F.

1985-01-01

More than a dozen methods have been applied to the growth of silicon ribbons, beginning as early as 1963. The ribbon geometry has been particularly intriguing for photovoltaic applications, because it might provide large area, damage free, nearly continuous substrates without the material loss or cost of ingot wafering. In general, the efficiency of silicon ribbon solar cells has been lower than that of ingot cells. The status of some ribbon growth techniques that have achieved laboratory efficiencies greater than 13.5% are reviewed, i.e., edge-defined, film-fed growth (EFG), edge-supported pulling (ESP), ribbon against a drop (RAD), and dendritic web growth (web).

Scintillating ribbon x-ray detector

International Nuclear Information System (INIS)

Kinchen, B.E.; Rogers, A.

1995-01-01

A patent in the early 1970's by Aerojet Corporation in Sacramento, CA put forth the idea of using an array of scintillating fibers for x-ray detection and imaging. In about 1975, Pratt and Whitney Aircraft in East Hartford, CT designed and manufactured an imaging system based on the patent. The device was 1.75 in thick in the direction of the x-ray beam and about 4 in. by 4 in. square. The device was used with a 8 MeV x-ray source to image and measure internal clearances within operating aircraft, gas turbines engines. There are significant advantages of fiber optic detectors in x-ray detection. However, the advantages are often outweighed by the disadvantages. Two of the advantages of scintillating fiber optic x-ray detectors are: (1) high limiting spatial frequency -- between 20 and 25 lp/mm; and (2) excellent x-ray stopping power -- they can be made thick and retain spatial resolution. In traditional fiber optic detectors the x-rays are oriented parallel to the long axis of the fiber. For the scintillating ribbon x-ray sensor, the x-rays are oriented normal to the fiber long axis. This ribbon sensor technique has a number of advantages over the two current radiographic techniques digital x-radiography and x-ray film: The main advantage the ribbon has is size and shape. It can be as thin as 0.05 in., virtually any width or length, and flexible. Once positioned in a given location, 20 to 100 square inches of the object being inspected can be imaged with a single x-ray beam sweep. It is clear that conventional digital cameras do not lend themselves to placement between walls of aircraft structures or similar items requiring x-ray inspections. A prototype scintillating ribbon x-ray sensor has been fabricated and tested by Synergistic Detector Designs. Images were acquired on corrosion test panels of aluminum fabricated by Iowa State University

Effect of apical clearing technique on the treatment outcome of teeth with asymptomatic apical periodontitis: A randomized clinical trial

OpenAIRE

Priya Mittal; Ajay Logani; Naseem Shah; R M Pandey

2016-01-01

Aim: This study aims to compare the periapical healing of teeth with asymptomatic apical periodontitis treated either by conventional apical preparation (CAP) or apical clearing technique (ACT). Materials and Methods: T wenty subjects with bilateral nonvital similar teeth exhibiting comparable periapical index (PAI) score were enrolled and randomly allocated. Group I (CAP, n = 20): Apical preparation three sizes greater (master apical file [MAF]) than the first binding file at the establis...

Electronic, magnetic and transport properties of graphene ribbons terminated by nanotubes

International Nuclear Information System (INIS)

Akhukov, M A; Yuan Shengjun; Fasolino, A; Katsnelson, M I

2012-01-01

We study, by density functional and large-scale tight-binding transport calculations, the electronic structure, magnetism and transport properties of the recently proposed graphene ribbons with edges rolled to form nanotubes. Edges with armchair nanotubes present magnetic moments localized either in the tube or the ribbon and of metallic or half-metallic character, depending on the symmetry of the junction. These properties have potential for spin valve and spin filter devices with advantages over other proposed systems. Edges with zigzag nanotubes are either metallic or semiconducting without affecting the intrinsic mobility of the ribbon. Varying the type and size of the nanotubes and ribbons offers the possibility to tailor the magnetic and transport properties, making these systems very promising for applications. (paper)

A MAGNETIC RIBBON MODEL FOR STAR-FORMING FILAMENTS

Energy Technology Data Exchange (ETDEWEB)

Auddy, Sayantan; Basu, Shantanu [Department of Physics and Astronomy, The University of Western Ontario, London, ON N6A 3K7 (Canada); Kudoh, Takahiro, E-mail: sauddy3@uwo.ca, E-mail: basu@uwo.ca, E-mail: kudoh@nagasaki-u.ac.jp [Faculty of Education, Nagasaki University, 1-14 Bunkyo-machi, Nagasaki 852-8521 (Japan)

2016-11-01

We develop a magnetic ribbon model for molecular cloud filaments. These result from turbulent compression in a molecular cloud in which the background magnetic field sets a preferred direction. We argue that this is a natural model for filaments and is based on the interplay between turbulence, strong magnetic fields, and gravitationally driven ambipolar diffusion, rather than pure gravity and thermal pressure. An analytic model for the formation of magnetic ribbons that is based on numerical simulations is used to derive a lateral width of a magnetic ribbon. This differs from the thickness along the magnetic field direction, which is essentially the Jeans scale. We use our model to calculate a synthetic observed relation between apparent width in projection versus observed column density. The relationship is relatively flat, similar to observations, and unlike the simple expectation based on a Jeans length argument.

Development of a magnetic measurement device for thin ribbon samples

International Nuclear Information System (INIS)

Sato, Yuta; Todaka, Takashi; Enokizono, Masato

2008-01-01

This paper presents a magnetic measurement device for thin ribbon samples, which are produced by rapid cooling technique. This device enables us to measure magnetic properties easily by only inserting a ribbon sample into a sample holder. The sample holder was made by bakelite to fix any width sample. A long solenoid coil was used to generate a uniform magnetic field and the sample holder was placed at the mid part of the solenoid. The magnetic field strength was measured using a shunt resistor and the magnetic flux density and magnetization in sample ribbons were evaluated by using search coils. The accuracy of measurement was verified with an amorphous metal ribbon sample. Next, we have measured magnetic properties of some magnetic shape memory alloys, which have different compositions. The measured results are compared and we clarified the effect of Sm contents on the magnetic properties

Continuous, Automated Manufacturing of String Ribbon Si PV Modules: Final Report, 21 May 1998 - 20 May 2001; FINAL

International Nuclear Information System (INIS)

Hanoka, J. I.

2001-01-01

This report summarizes the work done under a three-year PVMaT Phase 5A2 program. The overall goal was to attain a continuous, highly automated, fully integrated PV production line. In crystal growth, advances were made that resulted in lower substrate costs, higher yields, and lower capital and labor costs. A new string material was developed and implemented. Following this development, better control of the edge meniscus was achieved. A completely new furnace design was accomplished, and this became the standard platform in our new factory. Automation included ribbon thickness control and laser cutting of String Ribbon strips. Characterization of Evergreen's String Ribbon silicon was done with extensive help from the NREL laboratories, and this work provided a foundation for higher efficiency cells in the future. Advances in cell manufacturing included the development of high-speed printing and drying methods for Evergreen's unique cell making method and the design and building of a completely automated cell line from the beginning of front-contact application to the final tabbing of the cells. A so-called no-etch process whereby substrates from crystal growth go directly into p-n junction formation and emerge from this sequence without needing to go in and out of plastic carriers for any wet-chemical processing was developed. Process development as well as automation were brought to bear on improvements in soldering technology and cell interconnection in general. Using state-of-the-art manufacturing science, the Fraunhofer USA Center for Manufacturing Innovation at Boston University facilitated layout and process flow for the operation of our new factory. Evergreen Solar's new factory began operations in the second quarter of 2001. A good measure of the significant impact of this PVMaT subcontract is that virtually all of the manufacturing developments stemming from this project have been incorporated in this new factory

FLARE RIBBON ENERGETICS IN THE EARLY PHASE OF AN SDO FLARE

Energy Technology Data Exchange (ETDEWEB)

Fletcher, L.; Hannah, I. G.; Hudson, H. S. [School of Physics and Astronomy, SUPA, University of Glasgow, Glasgow, G12 8QQ (United Kingdom); Innes, D. E. [Max Planck Institute for Solar System Research, Max-Planck-Strasse 2, D-37191 Katlenburg-Lindau (Germany)

2013-07-10

The sites of chromospheric excitation during solar flares are marked by extended extreme ultraviolet ribbons and hard X-ray (HXR) footpoints. The standard interpretation is that these are the result of heating and bremsstrahlung emission from non-thermal electrons precipitating from the corona. We examine this picture using multi-wavelength observations of the early phase of an M-class flare SOL2010-08-07T18:24. We aim to determine the properties of the heated plasma in the flare ribbons, and to understand the partition of the power input into radiative and conductive losses. Using GOES, SDO/EVE, SDO/AIA, and RHESSI, we measure the temperature, emission measure (EM), and differential emission measure of the flare ribbons, and deduce approximate density values. The non-thermal EM, and the collisional thick target energy input to the ribbons are obtained from RHESSI using standard methods. We deduce the existence of a substantial amount of plasma at 10 MK in the flare ribbons, during the pre-impulsive and early-impulsive phase of the flare. The average column EM of this hot component is a few times 10{sup 28} cm{sup -5}, and we can calculate that its predicted conductive losses dominate its measured radiative losses. If the power input to the hot ribbon plasma is due to collisional energy deposition by an electron beam from the corona then a low-energy cutoff of {approx}5 keV is necessary to balance the conductive losses, implying a very large electron energy content. Independent of the standard collisional thick-target electron beam interpretation, the observed non-thermal X-rays can be provided if one electron in 10{sup 3}-10{sup 4} in the 10 MK (1 keV) ribbon plasma has an energy above 10 keV. We speculate that this could arise if a non-thermal tail is generated in the ribbon plasma which is being heated by other means, for example, by waves or turbulence.

Potential-induced degradation of Cu(In,Ga)Se2 photovoltaic modules

Science.gov (United States)

Yamaguchi, Seira; Jonai, Sachiko; Hara, Kohjiro; Komaki, Hironori; Shimizu-Kamikawa, Yukiko; Shibata, Hajime; Niki, Shigeru; Kawakami, Yuji; Masuda, Atsushi

2015-08-01

Potential-induced degradation (PID) of Cu(In,Ga)Se2 (CIGS) photovoltaic (PV) modules fabricated from integrated submodules is investigated. PID tests were performed by applying a voltage of -1000 V to connected submodule interconnector ribbons at 85 °C. The normalized energy conversion efficiency of a standard module decreases to 0.2 after the PID test for 14 days. This reveals that CIGS modules suffer PID under this experimental condition. In contrast, a module with non-alkali glass shows no degradation, which implies that the degradation occurs owing to alkali metal ions, e.g., Na+, migrating from the cover glass. The results of dynamic secondary ion mass spectrometry show Na accumulation in the n-ZnO transparent conductive oxide layer of the degraded module. A CIGS PV module with an ionomer (IO) encapsulant instead of a copolymer of ethylene and vinyl acetate shows no degradation. This reveals that the IO encapsulant can prevent PID of CIGS modules. A degraded module can recover from its performance losses by applying +1000 V to connected submodule interconnector ribbons from an Al plate placed on the test module.

GMI effect in CuO coated Co-based amorphous ribbons

Energy Technology Data Exchange (ETDEWEB)

Taysioglu, Asli Ayten [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Peksoz, Ahmet, E-mail: peksoz@uludag.edu.t [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaya, Yunus [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Derebasi, Naim [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Irez, Gazi [Department of Chemistry, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey); Kaynak, Gokay [Department of Physics, Sciences and Arts Faculty, Uludag University, 16059 Gorukle, Bursa (Turkey)

2009-11-13

A Copper oxide (CuO) film has been grown on a surface of Co-based amorphous ribbon using chemical successive ionic layer adsorption and reaction technique, at room temperature and atmosphere pressure. The influence of coating and width of ribbon on giant magneto impedance have been investigated over a frequency range from 0.1 to 3 MHz and under a static magnetic field between -8 and +8 kA/m. The results showed that Co-based amorphous ribbons, which are coated CuO film, have a significant effect on the magnitude and operation frequency for the giant magneto impedance effect as compared to the samples without coating. The highest giant magneto impedance effect was found to be 14.90 on 5 mm width coated ribbon, which is 60% higher than the sample without coating. A surface observation of these samples has been carried out by an atomic force microscope. The AFM images reveal the difference between surfaces of coated and as-cast sample.

GMI effect in CuO coated Co-based amorphous ribbons

International Nuclear Information System (INIS)

Taysioglu, Asli Ayten; Peksoz, Ahmet; Kaya, Yunus; Derebasi, Naim; Irez, Gazi; Kaynak, Gokay

2009-01-01

A Copper oxide (CuO) film has been grown on a surface of Co-based amorphous ribbon using chemical successive ionic layer adsorption and reaction technique, at room temperature and atmosphere pressure. The influence of coating and width of ribbon on giant magneto impedance have been investigated over a frequency range from 0.1 to 3 MHz and under a static magnetic field between -8 and +8 kA/m. The results showed that Co-based amorphous ribbons, which are coated CuO film, have a significant effect on the magnitude and operation frequency for the giant magneto impedance effect as compared to the samples without coating. The highest giant magneto impedance effect was found to be 14.90 on 5 mm width coated ribbon, which is 60% higher than the sample without coating. A surface observation of these samples has been carried out by an atomic force microscope. The AFM images reveal the difference between surfaces of coated and as-cast sample.

Dosimetry of wires and single ribbons of Iridium 192

International Nuclear Information System (INIS)

Mazzucco, L.D.

1998-01-01

The objective of this work is in order to present in table formats the dosimetry of wires and single ribbons of Iridium with lengths 1-12 cm for each one linear source along the bisector which is perpendicular at tissue sources (water) computed for linear activity 1 mCi/cm in the case of wires, and 1 mCi/seed for ribbons. The above tables are of direct use, adaptable at particular cases so they facilitate logarithmic graphics of doses in function of the distance for interpolation and use in the treatments planning. It was shown that for two sources with identical linear activity and total length, one of the equidistant seeds at 1 cm (ribbon) and one wire on the other hand, the differences in dose rates in near positions can be about the 15% so corroborating that it is not possible to use wire tables for seeds neither vice versa. Moreover it was elaborated tables of practical direct use for dose rate in water at c Gy/hr for wires and Ribbons 1-12 cm length and from 0.5-10 cm of distance in the perpendicular bisector at the Iridium implant. (Author)

Nanocrystallization in amorphous Fe40Ni40(Si+B)19Mo1-2 ribbons

International Nuclear Information System (INIS)

Saiseng, S.; Winotai, P.; Nilpairuch, S.; Limsuwan, P.; Tang, I.M.

2004-01-01

Cut Fe 40 Ni 40 (Si+B) 19 Mo 1-2 ribbons were annealed for 2 h at various temperatures between 350 deg. C and 600 deg. C. XRD and Mossbauer effect spectroscopy (ME) measurements were then performed on all of the ribbons. The magnetic properties of several ribbons were measured using a vibrating sample magnetometer (VSM). A differential thermal analysis scan (over the range 20-800 deg. C) of the as-cast ribbon showed two phase transitions; the first at 454 deg. C and the second at 525 deg. C. Both the XRD and ME spectra of the as cast, the 350 deg. C and 400 deg. C annealed ribbons showed that they were amorphous. The ME spectra of the 450 deg. C, 475 deg. C and 500 deg. C annealed ribbons showed that these ribbons contained α-Fe, α-Fe(Si) and t-Fe 2 B nanocrystallites. For the ribbons annealed above 550 deg. C, crystallites of t-Fe 2 B, t-Fe 3 B, t-Fe 5 SiB 2 and FCC-FeNi appeared, with the α-Fe and α-Fe(Si) crystallites disappearing. The sextets of all of the Fe compounds appeared in the ME spectra of the 525 deg. C annealed ribbon. The VSM measurements supported the picture of a two-stage phase transitions; amorphous phase→a nanocrystalline phase (Fe-containing nanocrystallites in an amorphous matrix) at 454 deg. C and then a second transition, the nanocrystalline phase→a disordered alloy containing Fe-B and Fe-Ni crystallites at 525 deg. C

Metallurgical characterization of melt-spun ribbons of U-5.4 wt%Nb alloy

Science.gov (United States)

Ma, Rong; Ren, Zhiyong; Tang, Qingfu; Chen, Dong; Liu, Tingyi; Su, Bin; Wang, Zhenhong; Luo, Chao

2018-06-01

The microstructures and micro-mechanical properties of the melt-spun ribbons of U-5.4 wt%Nb alloy were characterized using optical microscopy, scanning electron microscopy, X-ray diffraction and nanoindentation. Observed variations in microstructures and properties are related to the changes in ribbon thicknesses and cooling rates. The microstructures of the melt-spun ribbon consist of fine-scale columnar grains (∼1 μm) adjacent to the chill surface and coarse cellular grains in the remainder of the ribbon. In addition, the formation of inclusions in the ribbon is suppressed kinetically due to the high cooling rate during melt spinning. Compared with the water-quenched specimen prepared by traditional gravity casting and solution heat treatment, the elastic modulus values of the U-5.4 wt%Nb alloy were examined to vary with grain size and exhibited diverse energy dissipation capacities.

The ribbon microphone: A teaching aid for low frequency electromagnetic education

CSIR Research Space (South Africa)

Van Wyk, Marius S

2017-09-01

Full Text Available The ribbon microphone lends itself as a good example to use for education of multi-physics computer modeling and simulation. The value of the ribbon microphone as teaching aid can be extended by adding a transformer and electronic amplifier...

Domain walls dynamics in the amorphous ribbon with a helical magnetic anisotropy

International Nuclear Information System (INIS)

Zhmetko, D.N.; Savin, V.V.; Lemish, P.V.; Troschenkov, Y.N.

2006-01-01

The damping mechanism for motion of domain walls, which form the sandwich structure and move from the middle plane of the ribbon to opposite surfaces during the dynamic magnetization reversal, have been investigated. The difference between the real and ideal sandwich domain structure, the actual distribution of the anisotropy easy directions through the ribbon thickness and the M-bar s deviation from local easy directions under the action of applied magnetic field have been taken into account. It was revealed that the maximum of the total damping coefficient β tot (x) near the half-way of the domain wall run is due to the influence of the magnetic stray fields. These fields have a character of irregular oscillations and are directed approximately perpendicular to the local easy direction of the ribbon layer through which the domain wall propagates. The damping coefficient β e.c. (x) determined by eddy-currents has the maximal value close to the ribbon middle and decreases linearly to zero when the domain wall approaches the ribbon surface

Magnetoimpedance of cobalt-based amorphous ribbons/polymer composites

Energy Technology Data Exchange (ETDEWEB)

Semirov, A.V., E-mail: semirov@mail.ru [Irkutsk State University, Irkutsk (Russian Federation); Derevyanko, M.S.; Bukreev, D.A.; Moiseev, A.A.; Kudryavtsev, V.O. [Irkutsk State University, Irkutsk (Russian Federation); Safronov, A.P. [Ural Federal University, Yekaterinburg (Russian Federation)

2016-10-01

The combined influence of the temperature, the elastic tensile stress and the external magnetic field on the total impedance and impedance components were studied for rapidly quenched amorphous Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16} ribbons. Both as-cast amorphous ribbons and Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16}/polymer amorphous ribbon based composites were considered. Following polymer coverings were studied: modified rubber solution in o-xylene, solution of butyl methacrylate and methacrylic acid copolymer in isopropanol and solution of polymethylphenylsiloxane resin in toluene. All selected composites showed very good adhesion of the coverings and allowed to provide temperature measurements from 163 K up to 383 K under the applied deforming tensile force up to 30 N. The dependence of the modulus of the impedance and its components on the external magnetic field was influenced by the elastic tensile stresses and was affected by the temperature of the samples. It was shown that maximal sensitivity of the impedance and its components to the external magnetic field was observed at minimal temperature and maximal deforming force depended on the frequency of an alternating current. - Highlights: • Impedance and its components of amorphous Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16} ribbons were studied. • MI sensitivity to the magnetic field depends on a temperature and a deforming force. • Polymer covering can affect the functional properties of the composite.

OBSERVATIONS OF AN X-SHAPED RIBBON FLARE IN THE SUN AND ITS THREE-DIMENSIONAL MAGNETIC RECONNECTION

Energy Technology Data Exchange (ETDEWEB)

Li, Y.; Ding, M. D.; Yang, K. [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Qiu, J.; Longcope, D. W., E-mail: yingli@nju.edu.cn [Department of Physics, Montana State University, Bozeman, MT 59717 (United States)

2016-05-20

We report evolution of an atypical X-shaped flare ribbon that provides novel observational evidence of three-dimensional (3D) magnetic reconnection at a separator. The flare occurred on 2014 November 9. High-resolution slit-jaw 1330 Å images from the Interface Region Imaging Spectrograph reveal four chromospheric flare ribbons that converge and form an X-shape. Flare brightening in the upper chromosphere spreads along the ribbons toward the center of the “X” (the X-point), and then spreads outward in a direction more perpendicular to the ribbons. These four ribbons are located in a quadrupolar magnetic field. Reconstruction of magnetic topology in the active region suggests the presence of a separator connecting to the X-point outlined by the ribbons. The inward motion of flare ribbons in the early stage therefore indicates 3D magnetic reconnection between two sets of non-coplanar loops that approach laterally, and reconnection proceeds downward along a section of vertical current sheet. Coronal loops are also observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory confirming the reconnection morphology illustrated by ribbon evolution.

Mena-GRASP65 interaction couples actin polymerization to Golgi ribbon linking.

Science.gov (United States)

Tang, Danming; Zhang, Xiaoyan; Huang, Shijiao; Yuan, Hebao; Li, Jie; Wang, Yanzhuang

2016-01-01

In mammalian cells, the Golgi reassembly stacking protein 65 (GRASP65) has been implicated in both Golgi stacking and ribbon linking by forming trans-oligomers through the N-terminal GRASP domain. Because the GRASP domain is globular and relatively small, but the gaps between stacks are large and heterogeneous, it remains puzzling how GRASP65 physically links Golgi stacks into a ribbon. To explore the possibility that other proteins may help GRASP65 in ribbon linking, we used biochemical methods and identified the actin elongation factor Mena as a novel GRASP65-binding protein. Mena is recruited onto the Golgi membranes through interaction with GRASP65. Depleting Mena or disrupting actin polymerization resulted in Golgi fragmentation. In cells, Mena and actin were required for Golgi ribbon formation after nocodazole washout; in vitro, Mena and microfilaments enhanced GRASP65 oligomerization and Golgi membrane fusion. Thus Mena interacts with GRASP65 to promote local actin polymerization, which facilitates Golgi ribbon linking. © 2016 Tang et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Dynamics of sandwich domain structure in Co-based amorphous ribbons with helical magnetic anisotropy: Part I

International Nuclear Information System (INIS)

Zhmetko, D.N.; Zhmetko, S.D.

2009-01-01

The distribution of axes of easy magnetization close to a homogeneous distribution is revealed in each half-thickness of a ribbon after annealing it in a helical magnetic field. The transition from magnetic reversal of a ribbon by the displacement of two domain walls formed near a middle plane of a ribbon to magnetic reversal of a ribbon by displacement of two domain walls formed near to the main surfaces of a ribbon is found out during each half-period of a magnetic reversal.

Evaluation of three instrumentation techniques at the precision of apical stop and apical sealing of obturation

Directory of Open Access Journals (Sweden)

Özgür Genç

2011-08-01

Full Text Available OBJECTIVE: The aim of this study was to investigate the ability of two NiTi rotary apical preparation techniques used with an electronic apex locator-integrated endodontic motor and a manual technique to create an apical stop at a predetermined level (0.5 mm short of the apical foramen in teeth with disrupted apical constriction, and to evaluate microleakage following obturation in such prepared teeth. MATERIAL AND METHODS: 85 intact human mandibular permanent incisors with single root canal were accessed and the apical constriction was disrupted using a #25 K-file. The teeth were embedded in alginate and instrumented to #40 using rotary Lightspeed or S-Apex techniques or stainless-steel K-files. Distance between the apical foramen and the created apical stop was measured to an accuracy of 0.01 mm. In another set of instrumented teeth, root canals were obturated using gutta-percha and sealer, and leakage was tested at 1 week and 3 months using a fluid filtration device. RESULTS: All techniques performed slightly short of the predetermined level. Closest preparation to the predetermined level was with the manual technique and the farthest was with S-Apex. A significant difference was found between the performances of these two techniques (p<0.05. Lightspeed ranked in between. Leakage was similar for all techniques at either period. However, all groups leaked significantly more at 3 months compared to 1 week (p<0.05. CONCLUSIONS: Despite statistically significant differences found among the techniques, deviations from the predetermined level were small and clinically acceptable for all techniques. Leakage following obturation was comparable in all groups.

Temperature distribution study in flash-annealed amorphous ribbons

International Nuclear Information System (INIS)

Moron, C.; Garcia, A.; Carracedo, M.T.

2003-01-01

Negative magnetrostrictive amorphous ribbons have been locally current annealed with currents from 1 to 8 A and annealing times from 14 ms to 200 s. In order to obtain information about the sample temperature during flash or current annealing, a study of the temperature dispersion during annealing in amorphous ribbons was made. The local temperature variation was obtained by measuring the local intensity of the infrared emission of the sample with a CCD liquid nitrogen cooled camera. A distribution of local temperature has been found in spite of the small dimension of the sample

A micromagnetic study of the oscillations of pinned domain walls in magnetic ribbons

Energy Technology Data Exchange (ETDEWEB)

Alejos, Oscar [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain)]. E-mail: oscaral@ee.uva.es; Torres, Carlos [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain); Hernandez-Gomez, Pablo [Dpto. Electricidad y Electronica, Universidad de Valladolid, 47071 Valladolid (Spain); Lopez-Diaz, Luis [Dpto. Fisica Aplicada, Universidad de Salamanca, 37071 Salamanca (Spain); Torres, Luis [Dpto. Fisica Aplicada, Universidad de Salamanca, 37071 Salamanca (Spain); Martinez, Eduardo [Dpto. Ingenieria Electromecanica, Universidad de Burgos, 09001 Burgos (Spain)

2007-09-15

The work studies the dynamics of domain walls in magnetic ribbons with thicknesses of the order of magnitude of the permalloy exchange length (5.7 nm) by means of micromagnetic simulations. Two small defects are symmetrically placed on both edges of the ribbon, one on each edge, occupying the whole ribbon thickness. One transverse domain wall is pinned by the defects, in a head-to-head configuration. A free wall oscillation is forced by applying a static external magnetic field in the direction of the large axis until the wall reaches a new equilibrium position (elongation), and then removed. Three dynamic regimes are observed depending on the size of the cross ribbon section.

A micromagnetic study of the oscillations of pinned domain walls in magnetic ribbons

International Nuclear Information System (INIS)

Alejos, Oscar; Torres, Carlos; Hernandez-Gomez, Pablo; Lopez-Diaz, Luis; Torres, Luis; Martinez, Eduardo

2007-01-01

The work studies the dynamics of domain walls in magnetic ribbons with thicknesses of the order of magnitude of the permalloy exchange length (5.7 nm) by means of micromagnetic simulations. Two small defects are symmetrically placed on both edges of the ribbon, one on each edge, occupying the whole ribbon thickness. One transverse domain wall is pinned by the defects, in a head-to-head configuration. A free wall oscillation is forced by applying a static external magnetic field in the direction of the large axis until the wall reaches a new equilibrium position (elongation), and then removed. Three dynamic regimes are observed depending on the size of the cross ribbon section

Application Potential of Nanocrystalline Ribbons Still Pending

Science.gov (United States)

Butvin, Pavol; Butvinová, Beata; Švec, Peter; Sitek, Jozef

2010-09-01

Nanocrystalline soft-magnetic ribbons promised a wide-spread practical use when introduced at the beginning of nineties. After 20 years of extensive research there are still unclear material problems which are thought to be the principal reason why these materials show but marginal use. Poorly controllable magnetic anisotropy due to spontaneous intrinsic macroscopic stress that comes from an inevitable heterogeneity of the ribbon materials is pointed to in this work. Certain stress-based mechanisms are shown to induce the unintended anisotropy in the already familiar Finemets as well as in the newer Hitperms. Hysteresis loops, domain structure and power loss is used to reveal the anisotropy consequences and particular connected but still unanswered questions are pinpointed.

Magnetic properties of nanocrystallized Fe-Pt-B melt-spun ribbons

International Nuclear Information System (INIS)

Yamamoto, Tokujiro; Omori, Akihiro; Kimura, Hisamichi; Inoue, Akihisa

2007-01-01

L1 0 FePt nanoparticles have been prepared by etching grain boundaries of heat-treated melt-spun Fe-19Pt-25B (at.%) alloy ribbons. It is revealed that an L1 0 FePt nanocrystalline phase is directly formed from the Fe-Pt-B amorphous ribbons by long-time heat treatment at low temperatures in the vicinity of 723 K. With increasing heat treatment time, dimensions of the nanocrystallized FePt grains increase, accompanied by a change from soft ferromagnetic to hard ferromagnetic. The ribbon crystallized at 723 K for 1.8 ks consists of only an FePt L1 0 phase and its coercivity is as low as 0.381 kA/m. However, it increases to 372 kA/m with increasing grain size of precipitated L1 0 phase to about 30 nm by heat treatment for 86.4 ks, while the saturation magnetic flux density remains constant at about 0.4 T. Etching boundaries in heat-treated ribbons has been performed to obtain ferromagnetic L1 0 FePt nanoparticles and several particles were observed by means of transmission electron microscopy

Mechanical properties of metallic ribbons investigated by depth sensing indentation technique

International Nuclear Information System (INIS)

Pesek, Ladislav; Dobrzanski, Leszek A.; Zubko, Pavol; Konieczny, Jaroslaw

2006-01-01

The paper presents mechanical properties of two kinds of Co-based and one Fe-based metallic ribbons by the depth sensing indentation (DSI) technique. Investigations were carried out on two kinds ternary alloy Co 77 Si 11,5 B 11,5 and Fe 78 Si 13 B 9 and multicomponent Co 68 Fe 4 Mo 1 Si 13,5 B 13,5 , which are so-called 'zero-magnetostriction' materials. Metallic ribbons were investigated in amorphous state and partially crystallized state after annealing in 400deg. C in argon atmosphere. Heating of ribbons obtained by melt spinning technique was performed to check its effect on changes of mechanical properties

Supramolecular ribbons from amphiphilic trisamides self-assembly.

Science.gov (United States)

García, Fátima; Buendía, Julia; Sánchez, Luis

2011-08-05

Two amphiphilic C(3)-symmetric OPE-based trisamides have been synthesized and their self-assembling features investigated in solution and on surface. Variable-temperature UV-vis experiments demonstrate the cooperative supramolecular polymerization of these trisamides that self-assemble by the operation of triple C═O···H-N H-bonding arrays between the amide functional groups and π-π stacking between the aromatic units. The helical organization of the aggregates has been demonstrated by circular dichroism at a concentration as low as 1 × 10(-4) M in acetonitrile. In the reported trisamides, the large hydrophobic aromatic core acts as a solvophobic module impeding the interaction between the polar TEG chains and the amide H-bonds. This strategy makes unnecessary the separation of the amide functional groups to the polar tri(ethylene glycol) chains by paraffinic fragments. Achiral trisamide 1 self-assembles into flat ribbon-like structures that experience an amplification of chirality by the addition of a small amount of chiral 2 that generates twisted stripes.

Oxygen measurements in thin ribbon silicon

Energy Technology Data Exchange (ETDEWEB)

Hyland, S L; Ast, D G; Baghdadi, A

1987-03-01

The oxygen content of thin silicon ribbons grown by the dendritic web technique was measured using a modification of the ASTM method based on Fourier transform infrared spectroscopy. Web silicon was found to have a high oxygen content, ranging from 13 to 19 ppma, calculated from the absorption peak associated with interstitial oxygen and using the new ASTM conversion coefficient. The oxygen concentration changed by about 10% along the growth direction of the ribbon. In some samples, a shoulder was detected on the absorption peak. A similar shoulder in Czochralski grown material has been variously interpreted in the literature as due to a complex of silicon, oxygen, and vacancies, or to a phase of SiO/sub 2/ developed along dislocations in the material. In the case of web silicon, it is not clear which is the correct interpretation.

Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale

Directory of Open Access Journals (Sweden)

Y. F. Liang

2015-01-01

Full Text Available Melt spinning method has been widely applied for fabrication of Fe-based amorphous/nanocrystalline ribbons in industry. Compared with Fe-based amorphous/nanocrystalline alloys, Fe-6.5wt%Si high silicon steel is of low cost and has comparable excellent soft magnetic properties. Due to higher melting point and absence of supercooled liquid region, fabrication of Fe-6.5wt%Si ribbons is very hard and is only on lab scale. In this paper, we report that large scale fabrication of Fe-6.5wt%Si ribbons was successful and microstructures, ordered structures, and mechanical and soft magnetic properties of the ribbons were investigated. Due to rapid solidification rate, the ribbons were of ultrafine grains, and low degree of order and exhibited some extent of bending and tensile ductility. After heat treatment, excellent soft magnetic properties were obtained. Due to near-zero magnetostriction, the ribbons are promising to be used in electric devices with high frequencies where low noises are required.

Characterization of the kinetic arrest of martensitic transformation in Ni45Co5Mn36.8In13.2 melt-spun ribbons

Science.gov (United States)

Lino-Zapata, F. M.; Yan, H. L.; Ríos-Jara, D.; Sánchez Llamazares, J. L.; Zhang, Y. D.; Zhao, X.; Zuo, L.

2018-01-01

The kinetic arrest (KA) of martensitic transformation (MT) observed in Ni45Co5Mn36.8In13.2 melt-spun ribbons has been studied. These alloy ribbons show an ordered columnar-like grain microstructure with the longer grain axis growing perpendicular to ribbon plane and transform martensitically from a single austenitic (AST) parent phase with the L21-type crystal structure to a monoclinic incommensurate 6 M modulated martensite (MST). Results show that the volume fraction of austenite frozen into the martensitic matrix is proportional to the applied magnetic field. A fully arrest of the structural transition is found for a magnetic field of 7 T. The metastable character of the non-equilibrium field-cooled glassy state was characterized by introducing thermal and magnetic field fluctuations or measuring the relaxation of magnetization. The relaxation of magnetization from a field-cooled kinetically arrested state at 5 and 7 T follows the Kohlrausch-Williams-Watts (KWW) stretched exponential function with a β exponent around 0.95 indicating the weak metastable nature of the system under the strong magnetic fields. The relationship between the occurrence of exchange bias and the frozen fraction of AST into the MST matrix was studied.

Piezoelectric ribbons printed onto rubber for flexible energy conversion.

Science.gov (United States)

Qi, Yi; Jafferis, Noah T; Lyons, Kenneth; Lee, Christine M; Ahmad, Habib; McAlpine, Michael C

2010-02-10

The development of a method for integrating highly efficient energy conversion materials onto stretchable, biocompatible rubbers could yield breakthroughs in implantable or wearable energy harvesting systems. Being electromechanically coupled, piezoelectric crystals represent a particularly interesting subset of smart materials that function as sensors/actuators, bioMEMS devices, and energy converters. Yet, the crystallization of these materials generally requires high temperatures for maximally efficient performance, rendering them incompatible with temperature-sensitive plastics and rubbers. Here, we overcome these limitations by presenting a scalable and parallel process for transferring crystalline piezoelectric nanothick ribbons of lead zirconate titanate from host substrates onto flexible rubbers over macroscopic areas. Fundamental characterization of the ribbons by piezo-force microscopy indicates that their electromechanical energy conversion metrics are among the highest reported on a flexible medium. The excellent performance of the piezo-ribbon assemblies coupled with stretchable, biocompatible rubber may enable a host of exciting avenues in fundamental research and novel applications.

Broadband magnetic losses of nanocrystalline ribbons and powder cores

Energy Technology Data Exchange (ETDEWEB)

Beatrice, Cinzia, E-mail: c.beatrice@inrim.it [Istituto Nazionale di Ricerca Metrologica, Nanoscience and Materials Division, Torino (Italy); Dobák, Samuel [Institute of Physics, Faculty of Science, P.J. Šafárik University, Košice (Slovakia); Ferrara, Enzo; Fiorillo, Fausto [Istituto Nazionale di Ricerca Metrologica, Nanoscience and Materials Division, Torino (Italy); Ragusa, Carlo [Politecnico di Torino, Energy Department, Torino (Italy); Füzer, Ján; Kollár, Peter [Institute of Physics, Faculty of Science, P.J. Šafárik University, Košice (Slovakia)

2016-12-15

Finemet type alloys have been investigated from DC to 1 GHz at different induction levels upon different treatments: as amorphous precursors, as ribbons nanocrystallized with and without an applied saturating field, as consolidated powders. The lowest energy losses at all frequencies and maximum Snoek's product are exhibited by the transversally field-annealed ribbons. This is understood in terms of rotation-dominated magnetization process in the low-anisotropy material. Intergrain eddy currents are responsible for the fast increase of the losses with frequency and for early permeability relaxation of the powder cores. Evidence for resonant phenomena at high frequencies and for the ensuing inadequate role of the static magnetic constitutive equation of the material in solving the magnetization dynamics via the Maxwell's diffusion equation of the electromagnetic field is provided. It is demonstrated that, by taking the Landau–Lifshitz–Gilbert equation as a constitutive relation, the excellent frequency response of the transverse anisotropy ribbons can be described by analytical method.

A CIRCULAR-RIBBON SOLAR FLARE FOLLOWING AN ASYMMETRIC FILAMENT ERUPTION

Energy Technology Data Exchange (ETDEWEB)

Liu, Chang; Deng, Na; Lee, Jeongwoo; Wang, Haimin [Space Weather Research Laboratory, New Jersey Institute of Technology, University Heights, Newark, NJ 07102-1982 (United States); Liu, Rui [CAS Key Laboratory of Geospace Environment, Department of Geophysics and Planetary Sciences, University of Science and Technology of China, Hefei 230026 (China); Pariat, Étienne [LESIA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universits, UPMC Univ. Paris 06, Univ. Paris Diderot, Sorbonne Paris Cité, F-92190 Meudon (France); Wiegelmann, Thomas [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig Weg 3, D-37077 Göttingen (Germany); Liu, Yang [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305-4085 (United States); Kleint, Lucia, E-mail: chang.liu@njit.edu [University of Applied Sciences and Arts Northwestern Switzerland, Bahnhofstrasse 6, 5210 Windisch (Switzerland)

2015-10-20

The dynamic properties of flare ribbons and the often associated filament eruptions can provide crucial information on the flaring coronal magnetic field. This Letter analyzes the GOES-class X1.0 flare on 2014 March 29 (SOL2014-03-29T17:48), in which we found an asymmetric eruption of a sigmoidal filament and an ensuing circular flare ribbon. Initially both EUV images and a preflare nonlinear force-free field model show that the filament is embedded in magnetic fields with a fan-spine-like structure. In the first phase, which is defined by a weak but still increasing X-ray emission, the western portion of the sigmoidal filament arches upward and then remains quasi-static for about five minutes. The western fan-like and the outer spine-like fields display an ascending motion, and several associated ribbons begin to brighten. Also found is a bright EUV flow that streams down along the eastern fan-like field. In the second phase that includes the main peak of hard X-ray (HXR) emission, the filament erupts, leaving behind two major HXR sources formed around its central dip portion and a circular ribbon brightened sequentially. The expanding western fan-like field interacts intensively with the outer spine-like field, as clearly seen in running difference EUV images. We discuss these observations in favor of a scenario where the asymmetric eruption of the sigmoidal filament is initiated due to an MHD instability and further facilitated by reconnection at a quasi-null in corona; the latter is in turn enhanced by the filament eruption and subsequently produces the circular flare ribbon.

Pseudo ribbon metal ion beam source

International Nuclear Information System (INIS)

Stepanov, Igor B.; Ryabchikov, Alexander I.; Sivin, Denis O.; Verigin, Dan A.

2014-01-01

The paper describes high broad metal ion source based on dc macroparticle filtered vacuum arc plasma generation with the dc ion-beam extraction. The possibility of formation of pseudo ribbon beam of metal ions with the parameters: ion beam length 0.6 m, ion current up to 0.2 A, accelerating voltage 40 kV, and ion energy up to 160 kV has been demonstrated. The pseudo ribbon ion beam is formed from dc vacuum arc plasma. The results of investigation of the vacuum arc evaporator ion-emission properties are presented. The influence of magnetic field strength near the cathode surface on the arc spot movement and ion-emission properties of vacuum-arc discharge for different cathode materials are determined. It was shown that vacuum-arc discharge stability can be reached when the magnetic field strength ranges from 40 to 70 G on the cathode surface

Pseudo ribbon metal ion beam source.

Science.gov (United States)

Stepanov, Igor B; Ryabchikov, Alexander I; Sivin, Denis O; Verigin, Dan A

2014-02-01

The paper describes high broad metal ion source based on dc macroparticle filtered vacuum arc plasma generation with the dc ion-beam extraction. The possibility of formation of pseudo ribbon beam of metal ions with the parameters: ion beam length 0.6 m, ion current up to 0.2 A, accelerating voltage 40 kV, and ion energy up to 160 kV has been demonstrated. The pseudo ribbon ion beam is formed from dc vacuum arc plasma. The results of investigation of the vacuum arc evaporator ion-emission properties are presented. The influence of magnetic field strength near the cathode surface on the arc spot movement and ion-emission properties of vacuum-arc discharge for different cathode materials are determined. It was shown that vacuum-arc discharge stability can be reached when the magnetic field strength ranges from 40 to 70 G on the cathode surface.

Effect of the angle of apical resection on apical leakage, measured with a computerized fluid filtration device.

Science.gov (United States)

Garip, Hasan; Garip, Yıldız; Oruçoğlu, Hasan; Hatipoğlu, Seda

2011-03-01

We determined the effect of the angle of apical resection on apical leakage using a computerized fluid filtration meter with a laser system and a digital air pressure regulator in 46 extracted single-rooted human teeth. Orthograde endodontic treatment was performed. The root canals were prepared up to a size 50 K-type file with 17% EDTA solution (Roth International, Chicago, IL) and 5% NaOCl solution as the irrigant. Gates Glidden burs (Maillefer Instruments, Ballaigues, Switzerland) were used to flare the coronal two thirds of the canal. All canals were dried with paper points and then obturated using cold lateral condensation (except for the positive controls) of gutta-percha points and AH plus (Dentsply DeTrey, Konstanz, Germany). All 40 roots were sectioned 3 mm from the apex. Forty teeth were assigned randomly into 1 of 4 experimental groups of 10 teeth each: in group 1, the teeth were resected apically (90° angle) and the cavities were obturated with mineral trioxide aggregate (MTA); in group 2, after apical resection (90° angle), a root-end cavity was prepared using ultrasonic diamond retrotips and the cavities were obturated with MTA; in group 3, the teeth were resected apically (∼45° angle) and the cavities were obturated with MTA; and in group 4, after apical resection (∼45° angle), a root-end cavity was prepared using ultrasonic diamond retrotips and the cavities were obturated with MTA. An additional 6 teeth were used as controls (3 each, negative and positive controls). Apical leakage was measured using a computerized fluid filtration meter with a laser system. The mean apical microleakage was 2.0 ± 0.4 × 10(-4), 1.6 ± 0.6 × 10(-4), 1.6 ± 0.9 × 10(-4), and 1.8 ± 0.7 × 10(-4) μL/cmH(2)O/min(-1) at 1.2 atm, in groups 1 to 4, respectively. Although the mean apical microleakage was greater in group 1, the differences among the 4 groups were not statistically significant (P > .05). The results of these in vitro studies showed that when an

Apical root resorption in orthodontically treated adults.

Science.gov (United States)

Baumrind, S; Korn, E L; Boyd, R L

1996-09-01

This study analyzed the relationship in orthodontically treated adults between upper central incisor displacement measured on lateral cephalograms and apical root resorption measured on anterior periapical x-ray films. A multiple linear regression examined incisor displacements in four directions (retraction, advancement, intrusion, and extrusion) as independent variables, attempting to account for observed differences in the dependent variable, resorption. Mean apical resorption was 1.36 mm (sd +/- 1.46, n = 73). Mean horizontal displacement of the apex was -0.83 mm (sd +/- 1.74, n = 67); mean vertical displacement was 0.19 mm (sd +/- 1.48, n = 67). The regression coefficients for the intercept and for retraction were highly significant; those for extrusion, intrusion, and advancement were not. At the 95% confidence level, an average of 0.99 mm (se = +/- 0.34) of resorption was implied in the absence of root displacement and an average of 0.49 mm (se = +/- 0.14) of resorption was implied per millimeter of retraction. R2 for all four directional displacement variables (DDVs) taken together was only 0.20, which implied that only a relatively small portion of the observed apical resorption could be accounted for by tooth displacement alone. In a secondary set of univariate analyses, the associations between apical resorption and each of 14 additional treatment-related variables were examined. Only Gender, Elapsed Time, and Total Apical Displacement displayed statistically significant associations with apical resorption. Additional multiple regressions were then performed in which the data for each of these three statistically significant variables were considered separately, with the data for the four directional displacement variables. The addition of information on Elapsed Time or Total Apical Displacement did not explain a significant additional portion of the variability in apical resorption. On the other hand, the addition of information on Gender to the

Amorphous metal matrix composite ribbons

International Nuclear Information System (INIS)

Barczy, P.; Szigeti, F.

1998-01-01

Composite ribbons with amorphous matrix and ceramic (SiC, WC, MoB) particles were produced by modified planar melt flow casting methods. Weldability, abrasive wear and wood sanding examinations were carried out in order to find optimal material and technology for elevated wear resistance and sanding durability. The correlation between structure and composite properties is discussed. (author)

Effects of surface crystallization and oxidation in nanocrystalline FeNbCuSiB(P) ribbons

Energy Technology Data Exchange (ETDEWEB)

Butvinová, B., E-mail: beata.butvinova@savba.sk [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Butvin, P. [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Brzózka, K. [Department of Physics, University of Technology and Humanities in Radom, Krasickiego 54, 26-600 Radom (Poland); Kuzminski, M. [Institute of Physics PAS, Al. Lotnikow 36/42, 02-668 Warsaw (Poland); Maťko, I.; Švec Sr, P. [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Chromčíková, M. [Institute of Inorg. Chem. SAS, Centrum VILA, Študentská 2, 911 50 Trenčín (Slovakia)

2017-02-15

Si-poor Fe{sub 74}Nb{sub 3}Cu{sub 1}Si{sub 8}B{sub 14−x}P{sub x}, (x=0, 3) nanocrystalline ribbon-form alloys often form surfaces, which exert in-plane force on underlying ribbon interior when nanocrystallized in even modest presence of oxygen. Mostly unwanted hard-ribbon-axis magnetic anisotropy is standard result. Essential sources of the surface-caused stress have been sought and influence of P instead of B substitution on this effect was studied too. Preferred surface crystallization (PSC) was found to be the major reason. However P substitution suppresses PSC and promotes Fe-oxide formation, which eases the stress, softens the surfaces and provides different annealing evolution of surface properties. - Highlights: • Ar anneal of low-Si FeNbCuBSi ribbons produce surfaces that stress ribbon interior. • The stress comes mainly from preferred crystallization of surfaces. • Partial substitution of B by P changes annealing evolution of surface properties. • Without P, more crystalline surfaces significantly reduce ribbon's elasticity. • P suppresses surface crystallinity, promotes oxides and reduces mutual stress.

Effect of apical clearing technique on the treatment outcome of teeth with asymptomatic apical periodontitis: A randomized clinical trial.

Science.gov (United States)

Mittal, Priya; Logani, Ajay; Shah, Naseem; Pandey, R M

2016-01-01

This study aims to compare the periapical healing of teeth with asymptomatic apical periodontitis treated either by conventional apical preparation (CAP) or apical clearing technique (ACT). Twenty subjects with bilateral nonvital similar teeth exhibiting comparable periapical index (PAI) score were enrolled and randomly allocated. Group I (CAP, n = 20): Apical preparation three sizes greater (master apical file [MAF]) than the first binding file at the established working length. Group II (ACT, n = 20): Apical preparation three sizes greater than the MAF that was followed by dry reaming. Root canal therapy was accomplished in single-visit for all the teeth. They were pursued radiographically at 3, 6, 9 and 12 months. Pre- and post-treatment PAI scores were compared. To ascertain the proportion of healed teeth between the two groups, McNemar Chi-square test was applied. At 3, 6, and 9 months' time interval the proportion of healed teeth for Group II (ACT) was greater in comparison to Group I (CAP) (P < 0.05). However, at 12 months follow-up period this difference was not significant (P = 0.08). ACT enhanced the healing kinetics. However, the long-term (12 months) radiographic outcome was similar for either technique.

Hydrostatic extrusion of Cu-Ag melt spun ribbon

Science.gov (United States)

Hill, Mary Ann; Bingert, John F.; Bingert, Sherri A.; Thoma, Dan J.

1998-01-01

The present invention provides a method of producing high-strength and high-conductance copper and silver materials comprising the steps of combining a predetermined ratio of the copper with the silver to produce a composite material, and melt spinning the composite material to produce a ribbon of copper and silver. The ribbon of copper and silver is heated in a hydrogen atmosphere, and thereafter die pressed into a slug. The slug then is placed into a high-purity copper vessel and the vessel is sealed with an electron beam. The vessel and slug then are extruded into wire form using a cold hydrostatic extrusion process.

Quantitative assessment of apical debris extrusion and intracanal debris in the apical third, using hand instrumentation and three rotary instrumentation systems.

Science.gov (United States)

H K, Sowmya; T S, Subhash; Goel, Beena Rani; T N, Nandini; Bhandi, Shilpa H

2014-02-01

Decreased apical extrusion of debris and apical one third debris have strong implications for decreased incidence of postoperative inflammation and pain. Thus, the aim of this study was to assess quantitatively the apical extrusion of debris and intracanal debris in the apical third during root canal instrumentation using hand and three different types of rotary instruments. Sixty freshly extracted single rooted human teeth were randomly divided into four groups. Canal preparation was done using step-back with hand instrumentation, crown-down technique with respect to ProTaper and K3, and hybrid technique with LightSpeed LSX. Irrigation was done with NaOCl, EDTA, and normal saline and for final irrigation, EndoVac system was used. The apically extruded debris was collected on the pre-weighed Millipore plastic filter disk and weighed using microbalance. The teeth were submitted to the histological processing. Sections from the apical third were analyzed by a trinocular research microscope that was coupled to a computer where the images were captured and analyzed using image proplus V4.1.0.0 software. The mean weight of extruded debris for each group and intracanal debris in the root canal was statistically analyzed by a Kruskal-Wallis one-way analysis of variance and Mann-Whitney U test. The result showed that, hand instrumentation using K files showed the highest amount of debris extrusion apically when compared to ProTaper, K3 and LightSpeed LSX. The result also showed that there was no statistically significant difference between the groups in relation to presence of intracanal debris in the apical one third. Based on the results, all instrumentation techniques produced debris extrusion. The engine driven Ni-Ti systems extruded significantly less apical debris than hand instrumentation. There was no statistically significant difference between the groups in relation to presence of intracanal debris in the apical one third.

Martensitic transformation behavior and shape memory properties of Ti-Ni-Pt melt-spun ribbons

International Nuclear Information System (INIS)

Inamura, Tomonari; Takahashi, Yohei; Hosoda, Hideki; Wakashima, Kenji; Nagase, Takeshi; Nakano, Takayoshi; Umakoshi, Yukichi; Miyazaki, Shuichi

2006-01-01

Martensitic transformation behavior and shape memory properties of a Ti 50 Ni 40 Pt 10 (TiNiPt) melt-spun ribbon fabricated by a single roll melt-spinning technique were characterized. The constituent phases of the as-spun ribbon were B2 (parent phase) and B19 (martensite phase) at room temperature. The B2-B19 martensitic transformation temperatures of the as-spun ribbon were 100K higher than those of the bulk-material with the same chemical composition. The martensitic transformation temperatures of the as-spun ribbon were decreased with increasing the temperature of the heat-treatment made after the melt-spinning. The as-spun ribbon and the heat-treated ribbons exhibited shape recovery by heating and/or pseudoelasticity. The martensitic transformation temperatures determined from the temperature dependence of the 0.2% flow stress of the pseudoelastic deformation were in good agreement with those of B2-B19 martensitic transformation determined by DSC. It was confirmed that the observed shape recovery and pseudoelasticity are shape memory effect and superelasticity due to the B2-B19 martensitic transformation. Shape memory effect and superelasticity of melt-spun TiNiPt alloy were found to appear at higher temperatures compared to those of Bulk-material with the same composition. (author)

Proliferation of epithelial cell rests, formation of apical cysts, and regression of apical cysts after periapical wound healing.

Science.gov (United States)

Lin, Louis M; Huang, George T-J; Rosenberg, Paul A

2007-08-01

There is continuing controversy regarding the potential for inflammatory apical cysts to heal after nonsurgical endodontic therapy. Molecular cell biology may provide answers to a series of related questions. How are the epithelial cell rests of Malassez stimulated to proliferate? How are the apical cysts formed? How does the lining epithelium of apical cysts regress after endodontic therapy? Epithelial cell rests are induced to divide and proliferate by inflammatory mediators, proinflammatory cytokines, and growth factors released from host cells during periradicular inflammation. Quiescent epithelial cell rests can behave like restricted-potential stem cells if stimulated to proliferate. Formation of apical cysts is most likely caused by the merging of proliferating epithelial strands from all directions to form a three-dimensional ball mass. After endodontic therapy, epithelial cells in epithelial strands of periapical granulomas and the lining epithelium of apical cysts may stop proliferating because of a reduction in inflammatory mediators, proinflammatory cytokines, and growth factors. Epithelial cells will also regress because of activation of apoptosis or programmed cell death through deprivation of survival factors or by receiving death signals during periapical wound healing.

Laser-zone Growth in a Ribbon-to-ribbon (RTR) Process Silicon Sheet Growth Development for the Large Area Silicon Sheet Task of the Low Cost Solar Array Project

Science.gov (United States)

Baghdadi, A.; Gurtler, R. W.; Legge, R.; Sopori, B.; Rice, M. J.; Ellis, R. J.

1979-01-01

A technique for growing limited-length ribbons continually was demonstrated. This Rigid Edge technique can be used to recrystallize about 95% of the polyribbon feedstock. A major advantage of this method is that only a single, constant length silicon ribbon is handled throughout the entire process sequence; this may be accomplished using cassettes similar to those presently in use for processing Czochralski waters. Thus a transition from Cz to ribbon technology can be smoothly affected. The maximum size being considered, 3 inches x 24 inches, is half a square foot, and will generate 6 watts for 12% efficiency at 1 sun. Silicon dioxide has been demonstrated as an effective, practical diffusion barrier for use during the polyribbon formation.

Evolutionary analysis of a novel zinc ribbon in the N-terminal region of threonine synthase.

Science.gov (United States)

Kaur, Gurmeet; Subramanian, Srikrishna

2017-10-18

Threonine synthase (TS) catalyzes the terminal reaction in the biosynthetic pathway of threonine and requires pyridoxal phosphate as a cofactor. TSs share a common catalytic domain with other fold type II PALP dependent enzymes. TSs are broadly grouped into two classes based on their sequence, quaternary structure, and enzyme regulation. We report the presence of a novel zinc ribbon domain in the N-terminal region preceding the catalytic core in TS. The zinc ribbon domain is present in TSs belonging to both classes. Our sequence analysis reveals that archaeal TSs possess all zinc chelating residues to bind a metal ion that are lacking in the structurally characterized homologs. Phylogenetic analysis suggests that TSs with an N-terminal zinc ribbon likely represents the ancestral state of the enzyme while TSs without a zinc ribbon must have diverged later in specific lineages. The zinc ribbon and its N- and C-terminal extensions are important for enzyme stability, activity and regulation. It is likely that the zinc ribbon domain is involved in higher order oligomerization or mediating interactions with other biomolecules leading to formation of larger metabolic complexes.

The antimicrobial effect of apical box versus apical cone preparation using iodine potassium iodide as root canal dressing

DEFF Research Database (Denmark)

Markvart, Merete; Dahlén, Gunnar; Reit, Claes-Erik

2013-01-01

Abstract Purpose. The purpose was to study the reduction of intra-canal microflora in premolars with apical periodontitis instrumented with either apical box or apical cone preparation and to provide measurements of intervention effects to allow proper power calculation in future clinical trials.......-week post-sampling, a power calculation revealed that over 900 patients are needed to show a difference of 9% between the two protocols tested. Conclusions. Future trials should be conducted using stringent protocols and as multi-centre trials for reaching the required information size....

HOOKED FLARE RIBBONS AND FLUX-ROPE-RELATED QSL FOOTPRINTS

Energy Technology Data Exchange (ETDEWEB)

Zhao, Jie; Li, Hui [Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory, CAS, Nanjing 210008 (China); Gilchrist, Stuart A.; Aulanier, Guillaume; Schmieder, Brigitte; Pariat, Etienne, E-mail: nj.lihui@pmo.ac.cn [LESIA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universités, UPMC Univ. Paris 06, Univ. Paris-Diderot, Sorbonne Paris Cité, 5 place Jules Janssen, F-92195 Meudon (France)

2016-05-20

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare that begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by the Solar Dynamics Observatory /Atmospheric Imaging Assembly can be well reproduced from a Grad–Rubin nonlinear force-free field extrapolation method. Various inverse-S- and inverse-J-shaped magnetic field lines, which surround a coronal flux rope, coincide with the sigmoid as observed in different extreme-ultraviolet wavelengths, including its multithreaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and setup of the Grad–Rubin method. The modeled double inverse-J-shaped quasi-separatrix layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse-teardrop-shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares and the geometrical properties of eruptive flux ropes.

HOOKED FLARE RIBBONS AND FLUX-ROPE-RELATED QSL FOOTPRINTS

International Nuclear Information System (INIS)

Zhao, Jie; Li, Hui; Gilchrist, Stuart A.; Aulanier, Guillaume; Schmieder, Brigitte; Pariat, Etienne

2016-01-01

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare that begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by the Solar Dynamics Observatory /Atmospheric Imaging Assembly can be well reproduced from a Grad–Rubin nonlinear force-free field extrapolation method. Various inverse-S- and inverse-J-shaped magnetic field lines, which surround a coronal flux rope, coincide with the sigmoid as observed in different extreme-ultraviolet wavelengths, including its multithreaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and setup of the Grad–Rubin method. The modeled double inverse-J-shaped quasi-separatrix layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse-teardrop-shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares and the geometrical properties of eruptive flux ropes.

Variation of boron concentration in metallic glass ribbons

International Nuclear Information System (INIS)

Nagy, A.Z.; Vasvari, B.; Bakos, L.; Duwez, P.; Bogancs, J.; Nazarov, V.M.

1980-01-01

The boron concentration of Fe 40 Ni 40 P 14 B 6 , Fe 32 Ni 36 Cr 14 P 12 B 6 and Fe 40 Ni 40 B 20 metallic glasses is measured by neutron activation analysis on both surfaces of the ribbon samples. It is found that the boron concentration is always higher on the bright side of the ribbon than that on the dull side which is in contact with the cold surface of the wheel during the rapid quenching from the melt. A possible explanation is given in terms of the solid-liquid interface moving rapidly from the cooled surface to the free surface when preparing the samples. (author)

Low-frequency magnetization processes in chemically etched Co-based amorphous ribbons

International Nuclear Information System (INIS)

Betancourt, I.; Martinez, L.A.; Valenzuela, R.

2005-01-01

In this report we present a study of the magnetization processes for Co-based amorphous ribbons at low frequencies (10 Hz-13 MHz) as a function of decreasing thicknesses attained by chemical etching. Reversible domain-wall bulging, characterized by initial permeability and relaxation frequency, was monitored by means of inductance measurements. The real part of inductance (proportional to initial permeability) exhibited a decreasing trend with diminishing ribbon thickness, together with an increasing tendency for the relaxation frequency. For high amplitude of the ac field (leading to domain-wall unpinning), reduced ribbon thickness showed a deleterious-enhancement effect on irreversible domain-wall displacement, which was observed for both real and imaginary inductance spectroscopic plots. Results are interpreted in terms of reduced domain-wall pinning distances resulting from thinner alloy samples

Five-year longitudinal assessment of the prognosis of apical microsurgery

DEFF Research Database (Denmark)

von Arx, Thomas; Jensen, Simon S; Hänni, Stefan

2012-01-01

Apical surgery is an important treatment option for teeth with post-treatment apical periodontitis. Knowledge of the long-term prognosis is necessary when weighing apical surgery against alternative treatments. This study assessed the 5-year outcome of apical surgery and its predictors in a cohor...

A new dental powder from nanocrystalline melt-spun Ag-Sn-Cu alloy ribbons

International Nuclear Information System (INIS)

Do-Minh, N.; Le-Thi, C.; Nguyen-Anh, S.

2003-01-01

A new non-gamma-two dental powder has been developed from nanocrystalline melt-spun Ag-Sn-Cu alloy ribbons. The amalgam made from this powder exhibits excellent properties for dental filling. The nanocrystalline microstructure was found for the first time in as-spun and heat treated Ag(27-28)Sn(9-32) Cu alloy ribbons, using X-ray diffraction, scanning electron microscopy and energy-dispersive spectroscopy. As-spun ribbons exhibited a multi-phase microstructure with preferred existence of β (Ag 4 Sn) phase formed during rapid solidification (RS) due to supersaturating of copper (Cu) atoms and homogenous nanostructure with subgrain size of about (40-50) nm, which seems to be developed during RS process and can be caused by eutectic reaction of the Ag 3 Sn/Ag 4 Sn-Cu 3 Sn system. In heat treated ribbons the clustering of Cu atoms was always favored and stable in an ageing temperature and time interval determined by Cu content. The heat treatment led to essential changes of subgrain morphology, resulted in the appearance of large-angle boundaries with fine Cu 3 Sn precipitates and forming typical recrystallization twins. Such a microstructure variation in melt-spun ribbons could eventually yield enhanced technological, clinical and physical properties of the dental products, controlled by the ADA Specification N deg 1 and reported before. Thus, using the rapid solidification technique a new non-gamma-two dental material of high quality, nanocrystalline ribbon powder, can be produced. Copyright (2003) AD-TECH - International Foundation for the Advancement of Technology Ltd

Magnetic properties, phase evolution, and microstructure of the Co–Zr–V ribbons

International Nuclear Information System (INIS)

Hou, Zhipeng; Su, Feng; Xu, Shifeng; Zhang, Jinbao; Wu, Chunji; Liu, Dan; Wei, Beipei; Wang, Wenquan

2013-01-01

The substitution of V for Zr significantly impeded the growth of grain in the Co 82 Zr 18 ribbons during melt spinning and the amorphous Co 82 Zr 13 V 5 melt-spun ribbons were successfully produced at a wheel speed of 40 m/s. The values of coercivity H c and maximum energy product (BH) max first increased, reaching maximum at 560 °C and then they decreased sharply with increasing the annealing temperature. The optimal magnetic properties of H c =4.0 kOe and (BH) max =5.0 MGOe were obtained in the amorphous ribbons annealed at 560 °C. A suitable grain size of Co 11 Zr 2 phase was considered to be the main reason for the increase in coercivity. - Highlights: • High performance was obtained in Co 82 Zr 13 V 5 amorphous ribbons annealed. • We proved the hard magnetic phase was Co 11 Zr 2 phase. • Suitable grain size of Co 11 Zr 2 phase was the main reason for increase in coercivity

Definitions of apical vaginal support loss: a systematic review.

Science.gov (United States)

Meister, Melanie R L; Sutcliffe, Siobhan; Lowder, Jerry L

2017-03-01

We sought to identify and summarize definitions of apical support loss utilized for inclusion, success, and failure in surgical trials for treatment of apical vaginal prolapse. Pelvic organ prolapse is a common condition affecting more than 3 million women in the US, and the prevalence is increasing. Prolapse may occur in the anterior compartment, posterior compartment or at the apex. Apical support is considered paramount to overall female pelvic organ support, yet apical support loss is often underrecognized and there are no guidelines for when an apical support procedure should be performed or incorporated into a procedure designed to address prolapse. A systematic literature search was performed in 8 search engines: PubMed 1946-, Embase 1947-, Cochrane Database of Systematic Reviews, Cochrane Database of Abstracts of Review Effects, Cochrane Central Register of Controlled Trials, ClinicalTrials.gov, Proquest Dissertations and Theses, and FirstSearch Proceedings, using key words for apical pelvic organ prolapse and apical suspension procedures through April 2016. Searches were limited to human beings using human filters and articles published in English. Study authors (M.R.L.M., J.L.L.) independently reviewed publications for inclusion based on predefined variables. Articles were eligible for inclusion if they satisfied any of the following criteria: (1) apical support loss was an inclusion criterion in the original study, (2) apical support loss was a surgical indication, or (3) an apical support procedure was performed as part of the primary surgery. A total of 4469 publications were identified. After review, 35 articles were included in the analysis. Prolapse-related inclusion criteria were: (1) apical prolapse (n = 20, 57.1%); (2) overall prolapse (n = 8, 22.8%); or (3) both (n = 6, 17.1%). Definitions of apical prolapse (relative to the hymen) included: (1) apical prolapse >-1 cm (n = 13, 50.0%); (2) apical prolapse >+1 cm (n = 7, 26.9%); (3) apical

Dopamine Induces LTP Differentially in Apical and Basal Dendrites through BDNF and Voltage-Dependent Calcium Channels

Science.gov (United States)

Navakkode, Sheeja; Sajikumar, Sreedharan; Korte, Martin; Soong, Tuck Wah

2012-01-01

The dopaminergic modulation of long-term potentiation (LTP) has been studied well, but the mechanism by which dopamine induces LTP (DA-LTP) in CA1 pyramidal neurons is unknown. Here, we report that DA-LTP in basal dendrites is dependent while in apical dendrites it is independent of activation of L-type voltage-gated calcium channels (VDCC).…

Large magnetic entropy change in melt-spun LaFe11.5Si1.5 ribbons

International Nuclear Information System (INIS)

Xie Kun; Song Xiaoping; Zhu Yaoming; Lv Weipeng; Sun Zhanbo

2004-01-01

The microstructure transformation and the magnetic entropy change of LaFe 11.5 Si 1.5 melt-spun ribbons were investigated. The melt-spun ribbons show a homogeneous distribution of elements, and the homogeneity develops further after 5 h annealing. XRD results show that the ribbons are composed of NaZn 13 -type LaFe 11.5 Si 1.5 compounds and an α-Fe phase. After annealing, the ribbons crystallize well in the NaZn 13 -type structure and exhibit a very large magnetic entropy change. A first-order magnetic transition is observed in the annealed ribbons, and this is believed to be the origin of the large magnetic entropy. These results suggest that NaZn 13 -type LaFe 11.5 Si 1.5 compounds with a large magnetic entropy change can be produced by melt-spinning, the annealing time can be shortened significantly and the production cost of the magnetic refrigerant will be cut down accordingly

Manufacture of ribbon and solar cells of material of semiconductor grade

International Nuclear Information System (INIS)

1980-01-01

A method is described of producing ribbon-like substantially monocrystalline bodies of silicon or other materials of semiconductor grade suitable for use in solar cells or other semiconductor devices. A tube of the material is made and a photovoltaic junction formed in it. The tube is then divided lengthwise into a number of ribbon-like bodies. The photovoltaic junction can be formed either by diffusion or by ion-implantation. (U.K.)

Revascularization and Apical Plug in an Immature Molar

Science.gov (United States)

Roghanizadeh, Leyla; Fazlyab, Mahta

2018-01-01

Managing of necrotic permanent teeth with immature apices is a treatment challenges. Treatment of such teeth includes apexification, apical plug and more recently, revascularization technique with the probable advantage of continuation of root development. In the present case report the referred patient had discomfort with a necrotic immature mandibular first molar. Periapical radiography showed a rather large apical lesion around immature roots. Revascularization protocol using calcium-enriched mixture (CEM) cement was indicated for the mesial root. However, in distal canal apical plug technique was applied. At 2-year follow-up, both procedures were successful in relieving patient’s symptoms. Dentin formation and increase in length of the mesial root was obvious. Apical plug and revascularization technique proved to be successful in management of necrotic immature teeth; moreover, revascularization carried the advantage of continuation of root development. PMID:29692851

Fiscal 1974 Sunshine Project result report. R and D on photovoltaic power generation system (R and D on Si ribbon crystal vertical pulling method); 1974 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribbon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-30

This research includes (1) basic study on Si ribbon crystal vertical pulling method, (2) basic design of continuous Si ribbon crystal vertical pulling mechanism, (3) basic study on vertically pulled Si ribbon crystal, (4) study on capillary materials for capillary crystal pulling method, and (5) basic study on AlAs-GaAs system compound semiconductors. In the 1st research, for Si ribbon crystal vertical pulling growth, the ribbon crystal pulling equipment was prepared and modified, and Si crystals were obtained by capillary and web methods. In the 2nd research, for development of Si ribbon crystal vertical pulling growth technology, study was made on the simple energy-saving resource-saving continuous automatic production process. In the 3rd research, measurement was made on various characteristics of ribbon crystals. In the 4th research, study was made on requirements of capillary materials from the viewpoint of capillary growth mechanism. In the 5th research, basic technology for solar cell production was established through growth experiments of AlAs-GaAs mixed crystals and multiple epitaxial crystal layers. (NEDO)

Revascularization and periapical repair after endodontic treatment using apical negative pressure irrigation versus conventional irrigation plus triantibiotic intracanal dressing in dogs' teeth with apical periodontitis.

Science.gov (United States)

da Silva, Lea Assed Bezerra; Nelson-Filho, Paulo; da Silva, Raquel Assed Bezerra; Flores, Daniel Silva Herzog; Heilborn, Carlos; Johnson, James D; Cohenca, Nestor

2010-05-01

The objective of this study was to evaluate in vivo the revascularization and the apical and periapical repair after endodontic treatment using 2 techniques for root canal disinfection (apical negative pressure irrigation versus apical positive pressure irrigation plus triantibiotic intracanal dressing) in immature dogs' teeth with apical periodontitis. Two test groups of canals with experimentally induced apical periodontitis were evaluated according to the disinfection technique: Group 1, apical negative pressure irrigation (EndoVac system), and Group 2, apical positive pressure irrigation (conventional irrigation) plus triantibiotic intracanal dressing. In Group 3 (positive control), periapical lesions were induced, but no endodontic treatment was done. Group 4 (negative control) was composed of sound teeth. The animals were killed after 90 days and the maxillas and mandibles were subjected to histological processing. The sections were stained with hematoxylin and eosin and Mallory Trichrome and examined under light microscopy. A description of the apical and periapical features was done and scores were attributed to the following histopathological parameters: newly formed mineralized apical tissue, periapical inflammatory infiltrate, apical periodontal ligament thickness, dentin resorption, and bone tissue resorption. Intergroup comparisons were done by the Kruskal-Wallis and Dunn's tests (alpha = 0.05). Although statistically significant difference was found only for the inflammatory infiltrate (P irrigation with the EndoVac system can be considered as a promising disinfection protocol in immature teeth with apical periodontitis, suggesting that the use of intracanal antibiotics might not be necessary. Copyright (c) 2010 Mosby, Inc. All rights reserved.

Healing of apical rarefaction of three nonvital open apex anterior teeth using a white portland cement apical plug

Directory of Open Access Journals (Sweden)

Amitabha Chakraborty

2012-01-01

Full Text Available The major challenge of performing root canal treatment in an open apex pulp-less tooth is to obtain a good apical seal. MTA has been successfully used to achieve a good apical seal, wherein the root canal obturation can be done immediately. MTA and White Portland Cement has been shown similarity in their physical, chemical and biological properties and has also shown similar outcome when used in animal studies and human trials. In our study, open apex of three non vital upper central incisors has been plugged using modified white Portland cement. 3 to 6 months follow up revealed absence of clinical symptoms and disappearance of peri-apical rarefactions. The positive clinical outcome may encourage the future use of white Portland cement as an apical plug material in case of non vital open apex tooth as much cheaper substitute of MTA.

Role of the mouse retinal photoreceptor ribbon synapse in visual motion processing for optokinetic responses.

Science.gov (United States)

Sugita, Yuko; Araki, Fumiyuki; Chaya, Taro; Kawano, Kenji; Furukawa, Takahisa; Miura, Kenichiro

2015-01-01

The ribbon synapse is a specialized synaptic structure in the retinal outer plexiform layer where visual signals are transmitted from photoreceptors to the bipolar and horizontal cells. This structure is considered important in high-efficiency signal transmission; however, its role in visual signal processing is unclear. In order to understand its role in visual processing, the present study utilized Pikachurin-null mutant mice that show improper formation of the photoreceptor ribbon synapse. We examined the initial and late phases of the optokinetic responses (OKRs). The initial phase was examined by measuring the open-loop eye velocity of the OKRs to sinusoidal grating patterns of various spatial frequencies moving at various temporal frequencies for 0.5 s. The mutant mice showed significant initial OKRs with a spatiotemporal frequency tuning (spatial frequency, 0.09 ± 0.01 cycles/°; temporal frequency, 1.87 ± 0.12 Hz) that was slightly different from the wild-type mice (spatial frequency, 0.11 ± 0.01 cycles/°; temporal frequency, 1.66 ± 0.12 Hz). The late phase of the OKRs was examined by measuring the slow phase eye velocity of the optokinetic nystagmus induced by the sinusoidal gratings of various spatiotemporal frequencies moving for 30 s. We found that the optimal spatial and temporal frequencies of the mutant mice (spatial frequency, 0.11 ± 0.02 cycles/°; temporal frequency, 0.81 ± 0.24 Hz) were both lower than those in the wild-type mice (spatial frequency, 0.15 ± 0.02 cycles/°; temporal frequency, 1.93 ± 0.62 Hz). These results suggest that the ribbon synapse modulates the spatiotemporal frequency tuning of visual processing along the ON pathway by which the late phase of OKRs is mediated.

Role of the mouse retinal photoreceptor ribbon synapse in visual motion processing for optokinetic responses.

Directory of Open Access Journals (Sweden)

Yuko Sugita

Full Text Available The ribbon synapse is a specialized synaptic structure in the retinal outer plexiform layer where visual signals are transmitted from photoreceptors to the bipolar and horizontal cells. This structure is considered important in high-efficiency signal transmission; however, its role in visual signal processing is unclear. In order to understand its role in visual processing, the present study utilized Pikachurin-null mutant mice that show improper formation of the photoreceptor ribbon synapse. We examined the initial and late phases of the optokinetic responses (OKRs. The initial phase was examined by measuring the open-loop eye velocity of the OKRs to sinusoidal grating patterns of various spatial frequencies moving at various temporal frequencies for 0.5 s. The mutant mice showed significant initial OKRs with a spatiotemporal frequency tuning (spatial frequency, 0.09 ± 0.01 cycles/°; temporal frequency, 1.87 ± 0.12 Hz that was slightly different from the wild-type mice (spatial frequency, 0.11 ± 0.01 cycles/°; temporal frequency, 1.66 ± 0.12 Hz. The late phase of the OKRs was examined by measuring the slow phase eye velocity of the optokinetic nystagmus induced by the sinusoidal gratings of various spatiotemporal frequencies moving for 30 s. We found that the optimal spatial and temporal frequencies of the mutant mice (spatial frequency, 0.11 ± 0.02 cycles/°; temporal frequency, 0.81 ± 0.24 Hz were both lower than those in the wild-type mice (spatial frequency, 0.15 ± 0.02 cycles/°; temporal frequency, 1.93 ± 0.62 Hz. These results suggest that the ribbon synapse modulates the spatiotemporal frequency tuning of visual processing along the ON pathway by which the late phase of OKRs is mediated.

Regeneration of okra ( Abelmoschus esculentus L.) via apical shoot ...

African Journals Online (AJOL)

Abelmoschus esculentus L. Monech) via apical shoot culture system. The study of apical shoot culture system was found effective for regeneration of apical shoots. The okra (A. esculentus L. Monech) N-550 line evolved at R&D, Nirmal Seeds Pvt. Ltd., ...

75 FR 41808 - Narrow Woven Ribbons With Woven Selvedge From the People's Republic of China: Final Determination...

Science.gov (United States)

2010-07-19

... Ribbon Company, Inc. (``Petitioner''); Yama; and Yangzhou Bestpak Gifts & Crafts Co., Ltd. (``Bestpak... liquid petroleum gas from the supplier to Yama's factory.\\10\\ \\10\\ See Final Analysis Memorandum for Yama... limited to gift bags, gift boxes and/ or other types of ribbon. Narrow woven ribbons subject to the...

IN VIVO ANALYSIS OF SOME KEY CHARACTERISTICS OF THE APICAL ZONE IN TEETH WITH CHRONIC APICAL PERIODONTITIS.

Directory of Open Access Journals (Sweden)

Angela Gusiyska

2014-11-01

Full Text Available Introduction: The pathogenesis of internal and external resorptive processes in the dental tissues and those of the periapical zone is not fully understood, but the main purpose, either in teeth with internal resorption or in teeth with periapical lesions, is decontamination of the endodontic space and subsequent three-dimensional obturation in order to isolate periapical and oral tissues and prevent reinfection. Purpose: The aim of this article is to analyze in vivo some key characteristics of the apical zone in teeth with chronic apical periodontitis. Material and Methods: To facilitate the clinical protocol after the radiographic analysis and assessment of patency, the working lengths of 153 root canals (n = 153 in 106 teeth were determined. The clinical widths of the apical narrowing were measured by using the last instrument (ISO 0.02 tapered file, which can move freely through the apical narrowing after electrometric determination of the working length (Raypex 5 /VDW, Germany/. Results and Discussion: Determination of working width and working length is important for realizing the first stage of decontamination – maximum instrumentation of the endodontic space and choice of a clinical protocol. The classification of root canals in a particular group according to the relative patency or lysed apical opening is important for the selection of obturation technique, which is essential for reducing the microleakage in the zone. Conclusion: Since the target of this work were teeth with CAP, in the majority of the cases with clinical findings of root canals with preexisting filling, radicular pins, obliteration, separated canal instruments, perforations at different levels, via falsa or thresholds, the access to the apical zone was not subjected to a closely observed instrumental clinical protocol. In the treatment of each case, however, the clinical principles of modern endodontic treatment were closely observed.

Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

Energy Technology Data Exchange (ETDEWEB)

Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

1977-10-01

Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

Cell-to-module optical loss/gain analysis for various photovoltaic module materials through systematic characterization

Science.gov (United States)

Hsian Saw, Min; Khoo, Yong Sheng; Singh, Jai Prakash; Wang, Yan

2017-08-01

Reducing levelized cost of electricity (LCOE) is important for solar photovoltaics to compete against other energy sources. Thus, the focus should not only be on improving the solar cell efficiency, but also on continuously reducing the losses (or achieving gain) in the cell-to-module process. This can be achieved by choosing the appropriate module material and design. This paper presents a detailed and systematic characterization of various photovoltaic (PV) module materials (encapsulants, tabbing ribbons, and backsheets) and an evaluation of their impact on the output power of silicon wafer-based PV modules. Various characterization tools/techniques, such as UV-vis (reflectance) measurement, external quantum efficiency (EQE) measurement and EQE line-scan are used. Based on the characterization results, we use module materials with the best-evaluated optical performance to build “optimized modules”. Compared to the standard mini-module, an optical gain of more than 5% is achievable for the “optimized module” with selected module materials.

Apical pulmonary abscesses

International Nuclear Information System (INIS)

Mercado Ferrer, Cesar A; Serrano Vasquez, Francisco O

2004-01-01

We presented the case of a 54 year-old man with bilateral apical pulmonary abscess who consults due to fever and bronchorrhoea, isolating moraxella catharralis that is managed with ampicillin-sulbactam with an adequate clinical and radiological evolution

The sandwich domain structure in a Fe-based amorphous ribbon with uniaxial magnetic anisotropy

International Nuclear Information System (INIS)

Zhmetko, D.N.; Matsura, A.V.; Troschenkov, Y.N.; Seidametov, S.V.

2011-01-01

The formation and motion of two domain walls parallel to the ribbon surface are discovered during its dynamic magnetic reversal. The domain walls form near by the middle plane of a ribbon and move to its opposite main surfaces with different velocities.

Synthesis of MoS{sub 2} ribbons and their branched structures by chemical vapor deposition in sulfur-enriched environment

Energy Technology Data Exchange (ETDEWEB)

Mahyavanshi, Rakesh D., E-mail: rmahyavanshi@gmail.com [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kalita, Golap, E-mail: kalita.golap@nitech.ac.jp [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Sharma, Kamal P. [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kondo, Masuharu; Dewa, Takeshita [Department of Life Science and Applied Chemistry, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Kawahara, Toshio [Department of Electronics and Information Engineering, Chubu University, 1200 Matsumoto-cho, Kasugai 487-8501 (Japan); Tanemura, Masaki [Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

2017-07-01

Highlights: • We demonstrate synthesis of monolayer MoS{sub 2} ribbons and their branched structures. • Unidirectional, bi and tri-directional growth of ribbons from the nucleation point are obtained. • Unidirectional and other branched structures can be synthesized controlling the composition of MoO{sub 3} and sulfur vapor. • The ribbons possess uneven edge structures with angles of 60° and 120°, indicating molybdenum and sulfur terminations. - Abstract: Here, we demonstrate the synthesis of monolayer molybdenum disulfide (MoS{sub 2}) ribbons and their branched structures by chemical vapor deposition (CVD) in sulfur-enriched environment. The growth of the MoS{sub 2} ribbons, triangular and other crystals significantly depends on the exposure of sulfur and concentration of molybdenum oxide (MoO{sub 3}) vapor on the substrate surface. The width and length of the synthesized ribbons is around 5–10 and 50–100 μm, respectively, where the width reduces from the nucleation point toward the end of the ribbon. Unidirectional, bi and tri-directional growth of ribbons from the nucleation point with an angle of 60° and 120° were obtained attributing to crystallographic growth orientation of MoS{sub 2} crystals. The directional growth of dichalcogenides ribbons is a significant challenge, our process shows that such unidirectional and other branched structures can be achieved by controlling the stoichiometric composition of MoO{sub 3} and sulfur exposure on the substrate surface. Interestingly, all the individual and branched ribbons possess uneven abundant edge structures, where the edges are formed with angles of 60° and 120°, indicating variation in molybdenum and sulfur edge terminations. The directional growth of MoS{sub 2} ribbons with defined edge structures in particular CVD condition can open up new possibilities for electronic and electrochemical applications.

Association of human herpesvirus 6 subtypes with symptomatic apical periodontitis.

Science.gov (United States)

Hernádi, Katinka; Csoma, Eszter; Adám, Balázs; Szalmás, Anita; Gyöngyösi, Eszter; Veress, György; Ildikó-Márton; Kónya, József

2011-09-01

The occurrence of human herpesvirus (HHV) 6 subtypes A and B in apical periodontitis was determined. The relationship of HHV-6 subtypes to other disease associated herpesviruses, i.e., Epstein-Barr virus (EBV) and human cytomegalovirus, was also investigated. Forty apical periodontitis samples (17 symptomatic and 23 asymptomatic) and 40 healthy pulp control samples were collected. Nested polymerase chain reaction was used to detect HHV-6 DNA. HHV-6 DNA was observed in significantly higher frequencies in apical periodontitis samples than in control samples (20% vs. 2.5%; P = .03). Further classification of apical lesions revealed that subtype B of HHV-6 was significantly associated with large-sized and symptomatic lesions (P apical lesions (77%) harbored ≥1 of the tested herpesviruses: EBV was the most frequent herpesvirus (72.5%) in apical periodontitis, followed by HHV-6 (20%). Our findings suggest that EBV and HHV-6B infections can be associated with symptomatic apical periodontitis. Copyright © 2011 Mosby, Inc. All rights reserved.

38 CFR 21.9700 - Yellow Ribbon Program.

Science.gov (United States)

2010-07-01

... Yellow Ribbon Program and the student maintains satisfactory progress, conduct, and attendance according...) Based on student status (i.e. , undergraduate, graduate, doctoral), or (ii) For each subelement of the institution (i.e., college or professional school). The maximum amount specified for each subelement of the...

On the causes of persistent apical periodontitis: a review.

Science.gov (United States)

Nair, P N R

2006-04-01

Apical periodontitis is a chronic inflammatory disorder of periradicular tissues caused by aetiological agents of endodontic origin. Persistent apical periodontitis occurs when root canal treatment of apical periodontitis has not adequately eliminated intraradicular infection. Problems that lead to persistent apical periodontitis include: inadequate aseptic control, poor access cavity design, missed canals, inadequate instrumentation, debridement and leaking temporary or permanent restorations. Even when the most stringent procedures are followed, apical periodontitis may still persist as asymptomatic radiolucencies, because of the complexity of the root canal system formed by the main and accessory canals, their ramifications and anastomoses where residual infection can persist. Further, there are extraradicular factors -- located within the inflamed periapical tissue -- that can interfere with post-treatment healing of apical periodontitis. The causes of apical periodontitis persisting after root canal treatment have not been well characterized. During the 1990s, a series of investigations have shown that there are six biological factors that lead to asymptomatic radiolucencies persisting after root canal treatment. These are: (i) intraradicular infection persisting in the complex apical root canal system; (ii) extraradicular infection, generally in the form of periapical actinomycosis; (iii) extruded root canal filling or other exogenous materials that cause a foreign body reaction; (iv) accumulation of endogenous cholesterol crystals that irritate periapical tissues; (v) true cystic lesions, and (vi) scar tissue healing of the lesion. This article provides a comprehensive overview of the causative factors of non-resolving periapical lesions that are seen as asymptomatic radiolucencies post-treatment.

Controlling the microstructure and associated magnetic properties of Ni0.2Mn3.2Ga0.6 melt-spun ribbons by annealing

Directory of Open Access Journals (Sweden)

Mahmud Khan

2017-05-01

Full Text Available Here we report on the structural and magnetic properties of Ni0.2Mn3.2Ga0.6 melt-spun ribbons. The as-spun ribbons were found to exhibit mixed cubic phases that transform to non-cubic structure upon annealing. Additionally, an amorphous phase was found to co-exist in all ribbons. The SEM images show that minor grain formation occurs on the as-spun ribbons. However, the formation of extensive nano-grains was observed on the surfaces of the annealed ribbons. While the as-spun ribbons exhibit predominantly paramagnetic behavior, the ribbons annealed under various thermal conditions were found to be ferromagnetic with a Curie temperature of about 380 K. The ribbons annealed at 450 °C for 30 minutes exhibit a large coercive field of about 2500 Oe. The experimental results show that the microstructure and associated magnetic properties of the ribbons can be controlled by annealing techniques. The coercive fields and the shape of the magnetic hysteresis loops vary significantly with annealing conditions. Exchange bias effects have also been observed in the annealed ribbons.

Floating retained root lesion mimicking apical periodontitis.

Science.gov (United States)

Chung, Ming-Pang; Chen, Chih-Ping; Shieh, Yi-Shing

2009-10-01

A case of a retained root tip simulating apical periodontitis on radiographic examination is described. The retained root tip, originating from the left lower first molar, floated under the left lower second premolar apical region mimicking apical periodontitis. It appeared as an ill-defined periapical radiolucency containing a smaller radiodense mass on radiograph. The differential diagnosis included focal sclerosing osteomyelitis (condensing osteitis) and ossifying fibroma. Upon exicisional biopsy, a retained root associated with granulation tissue was found. After 1-year follow-up, the patient was asymptomatic and the periradicular lesion was healing. Meanwhile, the associated tooth showed a normal response to stimulation testing.

ANALYSIS OF RIBBONING ON CONICAL YARN PACKAGE WOUND BY OPENEND SPINNING MACHINES

Directory of Open Access Journals (Sweden)

Resul FETTAHOV

2001-03-01

Full Text Available In this paper, Ribboning , one of the common faults in yarn packages, is mathematically analysed. If yarn is repeatly laid on top of or along the same path as the previously wound yarn, this duplication of yarn path on the package creates a defect known as ribboning. The number of turns of package (n per double traverse of yarn guide is calculated in two different way One is calculated the length of a coil on the package and total length of yarn in a double traverse; the other is considered transmission rate between drum and conical yarn package The result of two different approach is similar and the probable diameter of conical yarn package which ribboning is occurred is calculated and used on Schalafhorst-Autocore OE spinning machines.

Orthogonal ribbons for suspending test masses in interferometric gravitational wave detectors

International Nuclear Information System (INIS)

Lee, B.H.; Ju, L.; Blair, D.G.

2005-01-01

We show that a simple modification of proposed ribbon suspensions for laser interferometric gravitational wave detectors can substantially reduce the amplitude of violin modes at the expense of a small deterioration of suspension thermal noise. Using low loss fused silica, large amplitude peaks which cause dynamic range problems can be reduced by 21 dB. The total number of horizontal longitudinal direction violin modes below 5 kHz is reduced to less than half that expected with conventional ribbon suspensions

Orthogonal ribbons for suspending test masses in interferometric gravitational wave detectors

Energy Technology Data Exchange (ETDEWEB)

Lee, B.H. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)]. E-mail: bhl@physics.uwa.edu.au; Ju, L. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia); Blair, D.G. [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)

2005-05-23

We show that a simple modification of proposed ribbon suspensions for laser interferometric gravitational wave detectors can substantially reduce the amplitude of violin modes at the expense of a small deterioration of suspension thermal noise. Using low loss fused silica, large amplitude peaks which cause dynamic range problems can be reduced by 21 dB. The total number of horizontal longitudinal direction violin modes below 5 kHz is reduced to less than half that expected with conventional ribbon suspensions.

Graphene ribbon growth on structured silicon carbide

Energy Technology Data Exchange (ETDEWEB)

Stoehr, Alexander; Link, Stefan; Starke, Ulrich [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany); Baringhaus, Jens; Aprojanz, Johannes; Tegenkamp, Christoph [Institut fuer Festkoerperphysik, Leibniz Universitaet Hannover (Germany); Niu, Yuran [MAX IV Laboratory, Lund University (Sweden); present address: School of Physics and Astronomy, Cardiff University (United Kingdom); Zakharov, Alexei A. [MAX IV Laboratory, Lund University (Sweden); Chen, Chaoyu; Avila, Jose; Asensio, Maria C. [Synchrotron SOLEIL and Universite Paris-Saclay, Gif sur Yvette (France)

2017-11-15

Structured Silicon Carbide was proposed to be an ideal template for the production of arrays of edge specific graphene nanoribbons (GNRs), which could be used as a base material for graphene transistors. We prepared periodic arrays of nanoscaled stripe-mesas on SiC surfaces using electron beam lithography and reactive ion etching. Subsequent epitaxial graphene growth by annealing is differentiated between the basal-plane mesas and the faceting stripe walls as monitored by means of atomic force microscopy (AFM). Microscopic low energy electron diffraction (μ-LEED) revealed that the graphene ribbons on the facetted mesa side walls grow in epitaxial relation to the basal-plane graphene with an armchair orientation at the facet edges. The π-band system of the ribbons exhibits linear bands with a Dirac like shape corresponding to monolayer graphene as identified by angle-resolved photoemission spectroscopy (ARPES). (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Analysis of stress-strain relationships in silicon ribbon

Science.gov (United States)

Dillon, O. W., Jr.

1984-01-01

An analysis of stress-strain relationships in silicon ribbon is presented. A model to present entire process, dynamical Transit Analysis is developed. It is found that knowledge of past-strain history is significant in modeling activities.

Gettering effects in RAD polysilicon ribbons: An XPS/AES study

Energy Technology Data Exchange (ETDEWEB)

Amarray, E.; Deville, J.P.; Quesada, J.

1987-03-01

Evidence for gettering effects during the various heat treatments applied to RAD ribbons were investigated with surface analysis methods. These heat treatments occur either during the burning-off process of the carbon support or during the POCl/sub 3/ diffusion, and transport metallic impurities near the surface of the sample. Oxidation of clean silicon surfaces, cleaved either in air or ultra-high vacuum, has shown that the same metallic impurities are brought near the surface by this treatment alone. It is thus suggested that controlled oxidations and heat treatments can be used to improve the electrical properties of polysilicon, and especially of ribbons.

Herpesviruses in asymptomatic apical periodontitis lesions: an immunohistochemical approach.

Science.gov (United States)

Saboia-Dantas, C J; Coutrin de Toledo, L F; Sampaio-Filho, H R; Siqueira, J F

2007-10-01

Human cytomegalovirus (HCMV) and Epstein-Barr virus (EBV) have been recently detected in samples from apical periodontitis lesions by means of molecular biology techniques and a role in the pathogenesis of this disease has been suggested. The present study was designed to survey asymptomatic primary apical periodontitis lesions for the presence of HCMV- and/or EBV-infected cells by means of immunohistochemistry. Apical periodontitis lesions were obtained from 35 patients [26 human immunodeficiency virus (HIV) -seronegative patients and nine HIV-seropositive patients] after tooth extraction and subjected to immunohistochemical analysis using monoclonal antibodies specific for HCMV and EBV. Fifteen of the 35 apical periodontitis lesions were positive for the target herpesviruses. Overall, EBV was found in 31% of the samples and HCMV in 23%, with 14% of the lesions showing EBV and HCMV dual infection. No association was found between HCMV or EBV with any particular histopathological type of apical periodontitis (P > 0.05). HCMV was significantly more frequent in apical periodontitis lesions from HIV-positive patients (67%) than in lesions from HIV-negative patients (8%) (P = 0.001). EBV was detected in 44% of lesions from HIV-positive patients and in 27% of lesions from HIV-negative patients, but this difference was not significant (P = 0.91). Our results showed that cells infected by HCMV and EBV can be found in apical periodontitis lesions, with a higher prevalence in HIV-positive patients. The specific role that these viruses play in the pathogenesis of apical periodontitis remains to be described.

Microbiology and Treatment of Acute Apical Abscesses

Science.gov (United States)

Rôças, Isabela N.

2013-01-01

SUMMARY Acute apical abscess is the most common form of dental abscess and is caused by infection of the root canal of the tooth. It is usually localized intraorally, but in some cases the apical abscess may spread and result in severe complications or even mortality. The reasons why dental root canal infections can become symptomatic and evolve to severe spreading and sometimes life-threatening abscesses remain elusive. Studies using culture and advanced molecular microbiology methods for microbial identification in apical abscesses have demonstrated a multispecies community conspicuously dominated by anaerobic bacteria. Species/phylotypes commonly found in these infections belong to the genera Fusobacterium, Parvimonas, Prevotella, Porphyromonas, Dialister, Streptococcus, and Treponema. Advances in DNA sequencing technologies and computational biology have substantially enhanced the knowledge of the microbiota associated with acute apical abscesses and shed some light on the etiopathogeny of this disease. Species richness and abundance and the resulting network of interactions among community members may affect the collective pathogenicity and contribute to the development of acute infections. Disease modifiers, including transient or permanent host-related factors, may also influence the development and severity of acute abscesses. This review focuses on the current evidence about the etiology and treatment of acute apical abscesses and how the process is influenced by host-related factors and proposes future directions in research, diagnosis, and therapeutic approaches to deal with this disease. PMID:23554416

Bone resorptive activity in symptomatic and asymptomatic apical lesions of endodontic origin.

Science.gov (United States)

Salinas-Muñoz, M; Garrido-Flores, M; Baeza, M; Huamán-Chipana, P; García-Sesnich, J; Bologna, R; Vernal, R; Hernández, M

2017-11-01

The aim of this study is to assess the levels and diagnostic accuracy of a set of bone resorption biomarkers, including TRAP-5, RANKL, and OPG in symptomatic and asymptomatic apical lesions and controls. Apical tissues from symptomatic and asymptomatic apical periodontitis patients and periodontal ligaments from healthy teeth extracted for orthodontic reasons were processed for tissue homogenization and the levels of TRAP-5, RANKL, and OPG were determined by multiplex assay. Marker levels were analyzed by Kruskal Wallis test, and diagnostic accuracy was analyzed with ROC curves. Higher levels of RANKL, OPG, and RANKL/OPG ratio were determined in both types of apical lesions compared to healthy periodontal ligament, whereas higher TRAP-5 levels were found only in symptomatic apical lesions (p apical lesions versus healthy controls (AUC = 0.69, p asymptomatic apical periodontitis (AUC = 0.71, p Apical lesions showed higher RANKL and OPG levels than healthy tissues. TRAP-5 levels were the highest in symptomatic apical lesions, suggesting that these represent a progressive state, and showed diagnostic potential. Clinically symptomatic apical periodontitis might represent biologically progressive apical lesions based on TRAP5 levels. TRAP5 has diagnostic potential to identify these lesions, representing a candidate prognostic biomarker.

[Apical resorption in pre-surgical orthodontics].

Science.gov (United States)

Piasente, M; Merlini, C; Amelotti, C; Antonioli, M; Roghi, M

1991-07-15

Apical root resorption is a frequent phenomenon observed in pre-surgical orthodontic; the reason is double: we deal with adult patients and we often move the teeth in the opposite direction compared to the position obtained in previous inefficacious orthodontic treatments. Notwithstanding the amount of apical root resorption we couldn't record an hyper-mobility of the teeth and a long term evaluation of occlusal stability didn't show any significant change.

Variation of magnetic properties with mischmetal content in the resource saving magnets of MM-Fe-B ribbons

Energy Technology Data Exchange (ETDEWEB)

Li, Zhu-bai, E-mail: lzbgj@163.com [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang, Li-chen [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Geng, Xiao-peng [Inner Mongolia Baotou Steel Rare Earth Magnetic Materials Co.Ltd, Baotou 014030 (China); Hu, Feng-xia; Sun, Ji-rong; Shen, Bao-gen [State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

2017-03-15

Magnetic materials of MM-Fe-B (MM=mischmetal) ribbons were prepared using melt spinning method by varying the content of MM. The ribbons contain minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. X-ray techniques show that the diffraction peak intensities of the minor phase Fe{sub 3}B vary with the content of constituent elements, indicating that the amount of minor phase could be tunable. The squareness of hysteresis loop is the best in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, which should mainly ascribe to the less amount of minor phase. Henkel plots verify the more uniform magnetization reversals in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, and the energy product achieves to the maximum of 12.74 MGOe with the coercivity of 6.50 kOe. With the increase of MM content the coercivity increases monotonically, and reaches to 9.13 kOe in MM{sub 15}Fe{sub 77.5}B{sub 7.5} ribbons, which should be related with the nature of the defects in the main phase. These investigations show that optimizing the content of constituent elements and phase constitution could improve magnetic properties in the resource-saving magnets of MM-Fe-B ribbons. - Highlights: • MM-Fe-B (MM=mischmetal) ribbons contains the minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. • The amount of minor phases varies with the content of constituent elements. • The energy product of 12.74 MGOe is obtained in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons by optimizing the phase constitution.

Evaluation of Bacteriological Profile in the Apical Root Segment of the Patients with Primary Apical Periodontitis.

Science.gov (United States)

Tatikonda, Aravind; Sudheep, N; Biswas, Krishna P; Gowtham, K; Pujari, Sudarshan; Singh, Padam

2017-01-01

Apical periodontitis usually results from bacterial accumulation and contamination occurring in the root-canal system, and extending beyond the apical foramen to involve the periapical tissues. Literature has a paucity of the studies that stress on the division and analysis of the pulp canal segments. The reason for this disparity might be the technique used for collecting the samples from the pulp canals. Hence, we carried out the present study to evaluate the microbial flora in the apical part of the roots with necrotic pulp canals. The present study included the assessment of 40 freshly extracted teeth that had necrotized pulpal tissue along with the presence of periapical periodontal lesions. Removal of the soft tissue lesions attached to the root portion of the teeth along with apical periodontal lesions was done with the help of scalpel blade, after rinsing them with a sterile solution of saline. Thorough cleaning of the root surfaces was done with hydrogen peroxide followed by rapid disinfection with the help of sodium hypochlorite at varying concentrations. Sectioning of the root portion of all the specimens with the help of a disk was done perpendicular to the long axis of the teeth at a distance of roughly 5 to 6 mm from the teeth's apicalmost point. Cryotubes were used for transferring the specimens of apical portions containing 1 mL of buffer and were subjected to immediate frozen processing at a temperature of -20°C. A 10 K-type file was used for the initial collection of the samples followed by subsequent incubation of the files and paper pints in the incubation cabinet. Subsequent deoxyribonucleic acid (DNA) extraction from the samples was done following the procedure described by Siqueira et al. Paster et al's modification of the reverse-capture checkerboard assay was used in the present study. Semiquantitative data were used for overcoming the difficulties arising due to obtaining the counts of the polymerase chain reaction (PCR)-based analysis of

Device for investigation of magnetic flux jumps in ribbon superconductors

International Nuclear Information System (INIS)

Andrianov, A.V.; Bashkirov, Yu.A.; Kremlev, M.G.

1986-01-01

A device for simulation of magnetic flux jumps in superconductors of conducting magnet sandwich-type windings super-applyed of a ribbon conductor is described. A superconducting magnet with a measuring cassetter are the main elements of the device. An external magnetic field is generated by a two-sectional superconducting magnet permitting to simulate the shape of the magnetic field characteristic for sandwich-type windings. Maximum radial component of the magnetic field is 2 T. Jumps of the magnetic flux are recorded by induction transducers and the magnetic field-by Hall trasducer. The effect of coating of standard metal on magnetic flux jumps in Nb 3 Sn base superconducting ribbon is considered

Use of intraventricular ribbon gauze to reduce particulate emboli during aortic valve replacement

Directory of Open Access Journals (Sweden)

Loubani Mahmoud

2006-11-01

Full Text Available Abstract Background The incidence of cerebrovascular accidents following aortic valve surgery remains a devastating complication. The aim of this study was to determine the number of potential embolic material arising during aortic valve replacement and to examine the efficacy of using ribbon gauze in the left ventricle during removal of the native valve and decalcification of the aortic annulus. Methods Ribbon gauze was inserted into the left ventricular cavity prior to aortic valve excision in an unselected, prospectively studied series of 30 patients undergoing aortic valve replacement. A further 30 lengths of ribbon gauze were soaked in the pericardiotomy blood of the same patients and all were subjected to histological analysis. Results The median number of tissue fragments from the aortic valve replacement group was significantly higher than in the control group 5 (0–18 versus 0 (0–1 (p = 3.6 × 10-5. The size of tissue fragments varied between 0.1 and 9.0 mm with a mean of 0.61 ± 1.12 mm and a median of 0.2 mm. There was a significantly higher number of tissue fragments associated with patients having surgery for aortic stenosis when compared with patients who had aortic regurgitation with median of 5 (0–18 versus 0 (0–3 (p = 0.8 × 10-3. Conclusion Significant capture of particulate debris by the intraventricular ribbon gauze suggests that the technique of left ventricular ribbon gauze insertion during aortic valve excision has merit.

Properties of rapidly solidified Fe-Cr-Al ribbons for the use as automotive exhaust gas catalyst substrates

International Nuclear Information System (INIS)

Emmerich, K.

1993-01-01

Metallic honeycomb structures are used as catalyst substrates in automotive exhaust gas systems. This application requires an outstanding corrosion resistance at elevated temperatures of the substrate material. Technical improvements can be achieved by the use of rapid solidification technology for the production of the Fe-Cr-Al ribbons since the Al content can be substantially increased from about 5% Al in the conventionally rolled material to about 12% Al in the rapid solidified ribbon. As a result the lifetime of the ribbon in a higher-temperature corrosion environment is drastically increased. In addition the scale/metal adherance is improved. The impediment of recrystallization in the rapidly solidified ribbons prevents an embrittlement even in carbonizing atmospheres. (orig.)

Frequency and levels of candidate endodontic pathogens in acute apical abscesses as compared to asymptomatic apical periodontitis

OpenAIRE

Rôças, Isabela N.; Siqueira, José F.

2018-01-01

Introduction Acute apical abscess is caused by bacteria that leave the infected dental root canal to invade the periodontal tissues. Most species occurring in abscesses are also found in asymptomatic infections; therefore, the possibility exists that not only the presence of certain species but also their specific counts influence the appearance of symptoms. This molecular study compared the frequency and levels of several candidate endodontic pathogens in teeth with acute apical abscesses an...

Incidence of apical root cracks and apical dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths.

Science.gov (United States)

Liu, Rui; Kaiwar, Anjali; Shemesh, Hagay; Wesselink, Paul R; Hou, Benxiang; Wu, Min-Kai

2013-01-01

The aim of this study was to compare the incidence of apical root cracks and dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths. Two hundred forty mandibular incisors were mounted in resin blocks with simulated periodontal ligaments, and the apex was exposed. The root canals were instrumented with rotary and hand files, namely K3, ProTaper, and nickel-titanium Flex K files to the major apical foramen (AF), short AF, or beyond AF. Digital images of the apical surface of every tooth were taken during the apical enlargement at each file change. Development of dentinal defects was determined by comparing these images with the baseline image. Multinomial logistic regression test was performed to identify influencing factors. Apical crack developed in 1 of 80 teeth (1.3%) with hand files and 31 of 160 teeth (19.4%) with rotary files. Apical dentinal detachment developed in 2 of 80 teeth (2.5%) with hand files and 35 of 160 teeth (21.9%) with rotary files. Instrumentation with rotary files terminated 2 mm short of AF and did not cause any cracks. Significantly less cracks and detachments occurred when instrumentation with rotary files was terminated short of AF, as compared with that terminated at or beyond AF (P hand instruments; instrumentation short of AF reduced the risk of dentinal defects. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Structural relaxation of Ni-Si-B amorphous ribbon

NARCIS (Netherlands)

Jurikova, A.; Csach, K.; Miskuf, J.; Ocelik, V.

The structural relaxation of the Ni-Si-B amorphous ribbon was studied by means of differential scanning calorimetry and thermomechanical analysis. It was shown that considerable length changes associated with reversible structural relaxation were revealed after a previous creep applied at higher

Variation of boron concentration in metallic glass ribbons

International Nuclear Information System (INIS)

Nagy, A.Z.; Vasvari, B.; Duwez, P.; Bakos, L.; Seres, Z.; Bogancs, J.; Nazarov, V.M.

1979-12-01

The surface boron concentration of Fe 40 Ni 40 P 14 B 6 , Fe 32 Ni 36 Cr 14 P 12 B 6 and Fe 40 Ni 40 B 20 metallic glasses was measured by neutron activation analysis on both sides of the ribbon samples. It was found that the boron concentration is always higher at the bright side of the ribbon than that at the dull side which is in contact with the cold surface of the wheel during the rapid quenching from the melt. A possible explanation is given in terms of the solid-liquid interface moving rapidly from the cooled surface to the free surface when preparing the samples. Range values of alpha-particles for some characteristic compositions of metallic glasses are tabulated. A mathematical technique for the deconvolution of experimental data is described and the listing of the Fortran program is enclosed. (author)

Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

Energy Technology Data Exchange (ETDEWEB)

Sánchez Llamazares, J. L., E-mail: jose.sanchez@ipicyt.edu.mx; Flores-Zúñiga, H.; Sánchez-Valdés, C. F. [Instituto Potosino de Investigación Científica y Tecnológica A.C., Camino a la Presa San José 2055 Col. Lomas 4" a, San Luis Potosí, S.L.P. 78216 (Mexico); Álvarez-Alonso, Pablo [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); Lara Rodríguez, G. A. [Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito Exterior s/n, Ciudad Universitaria, México, D. F. 04510 (Mexico); Fernández-Gubieda, M. L. [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); BC Materials, Camino de Ibaizabal, Edificio 500, Planta 1, Parque Científico y Tecnológico de Zamudio, 48160 Derio (Spain)

2015-05-07

The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

Root Canal Microorganism Profiles on Upper Anterior Teeth of Apical Periodontitis

OpenAIRE

Riuwpassa, E. Irene

2013-01-01

Microorganisms are the main causative agents on the development of apical periodontitis. Microorganisms infecting the root canal system are colonized in communities as biofilm. These bacterial communities show distinct pattern related to the different forms of apical periodontitis which are determined by species richness and abundance.this study is aimed to examine the root canal microorganisms on upper anterior teeth of asymptomatic apical periodontitis and chronic apical abscess. Samples we...

Bony change of apical lesion healing process using fractal analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Min; Park, Hyok; Jeong, Ho Gul; Kim, Kee Deog; Park, Chang Seo [Yonsei University College of Medicine, Seoul (Korea, Republic of)

2005-06-15

To investigate the change of bone healing process after endodontic treatment of the tooth with an apical lesion by fractal analysis. Radiographic images of 35 teeth from 33 patients taken on first diagnosis, 6 months, and 1 year after endodontic treatment were selected. Radiographic images were taken by JUPITER computerized Dental X-ray System. Fractal dimensions were calculated three times at each area by Scion Image PC program. Rectangular region of interest (30 x 30) were selected at apical lesion and normal apex of each image. The fractal dimension at apical lesion of first diagnosis (L{sub 0}) is 0.940 {+-} 0.361 and that of normal area (N{sub 0}) is 1.186 {+-} 0.727 (p<0.05). Fractal dimension at apical lesion of 6 months after endodontic treatment (L{sub 1}) is 1.076 {+-} 0.069 and that of normal area (N{sub 1}) is 1.192 {+-} 0.055 (p<0.05). Fractal dimension at apical lesion of 1 year after endodontic treatment (L{sub 2}) is 1.163 {+-} 0.074 and that of normal area (N{sub 2}) is 1.225 {+-} 0.079 (p<0.05). After endodontic treatment, the fractal dimensions at each apical lesions depending on time showed statistically significant difference. And there are statistically significant different between normal area and apical lesion on first diagnosis, 6 months after, 1 year after. But the differences were grow smaller as time flows. The evaluation of the prognosis after the endodontic treatment of the apical lesion was estimated by bone regeneration in apical region. Fractal analysis was attempted to overcome the limit of subjective reading, and as a result the change of the bone during the healing process was able to be detected objectively and quantitatively.

Temperature dependent evolution of wrinkled single-crystal silicon ribbons on shape memory polymers.

Science.gov (United States)

Wang, Yu; Yu, Kai; Qi, H Jerry; Xiao, Jianliang

2017-10-25

Shape memory polymers (SMPs) can remember two or more distinct shapes, and thus can have a lot of potential applications. This paper presents combined experimental and theoretical studies on the wrinkling of single-crystal Si ribbons on SMPs and the temperature dependent evolution. Using the shape memory effect of heat responsive SMPs, this study provides a method to build wavy forms of single-crystal silicon thin films on top of SMP substrates. Silicon ribbons obtained from a Si-on-insulator (SOI) wafer are released and transferred onto the surface of programmed SMPs. Then such bilayer systems are recovered at different temperatures, yielding well-defined, wavy profiles of Si ribbons. The wavy profiles are shown to evolve with time, and the evolution behavior strongly depends on the recovery temperature. At relatively low recovery temperatures, both wrinkle wavelength and amplitude increase with time as evolution progresses. Finite element analysis (FEA) accounting for the thermomechanical behavior of SMPs is conducted to study the wrinkling of Si ribbons on SMPs, which shows good agreement with experiment. Merging of wrinkles is observed in FEA, which could explain the increase of wrinkle wavelength observed in the experiment. This study can have important implications for smart stretchable electronics, wrinkling mechanics, stimuli-responsive surface engineering, and advanced manufacturing.

Mn-silicide nanostructures aligned on massively parallel silicon nano-ribbons

International Nuclear Information System (INIS)

De Padova, Paola; Ottaviani, Carlo; Ronci, Fabio; Colonna, Stefano; Quaresima, Claudio; Cricenti, Antonio; Olivieri, Bruno; Dávila, Maria E; Hennies, Franz; Pietzsch, Annette; Shariati, Nina; Le Lay, Guy

2013-01-01

The growth of Mn nanostructures on a 1D grating of silicon nano-ribbons is investigated at atomic scale by means of scanning tunneling microscopy, low energy electron diffraction and core level photoelectron spectroscopy. The grating of silicon nano-ribbons represents an atomic scale template that can be used in a surface-driven route to control the combination of Si with Mn in the development of novel materials for spintronics devices. The Mn atoms show a preferential adsorption site on silicon atoms, forming one-dimensional nanostructures. They are parallel oriented with respect to the surface Si array, which probably predetermines the diffusion pathways of the Mn atoms during the process of nanostructure formation.

Test results of Nb3Sn ribbons for the Princeton D coil test program

International Nuclear Information System (INIS)

Kaugerts, J.; File, J.; Willard, J.W.

1974-10-01

A previously described D coil test program was modified. Details of a smaller Nb 3 Sn D coil test program are described. Cusp coil tests were made with several Nb 3 Sn composite ribbons. Measurements of both the quench and recovery currents as a function of magnetic field component perpendicular to the wide edge of the ribbon are presented. (auth)

Apical Revascularization after Delayed Tooth Replantation: An Unusual Case

Directory of Open Access Journals (Sweden)

Marília Pacífico Lucisano

2016-01-01

Full Text Available The aim of this paper is to present the clinical and radiological outcome of the treatment involving a delayed tooth replantation after an avulsed immature permanent incisor, with a follow-up of 1 year and 6 months. An 8-year-old boy was referred after dental trauma that occurred on the previous day. The permanent maxillary right central incisor (tooth 11 had been avulsed. The tooth was hand-held during endodontic therapy and an intracanal medication application with calcium hydroxide-based paste was performed. An apical plug with mineral trioxide aggregate (MTA was introduced into the apical portion of the canal. When the avulsed tooth was replanted with digital pressure, a blood clot had formed within the socket, which moved the MTA apical plug about 2 mm inside of the root canal. These procedures developed apical revascularization, which promoted a successful endodontic outcome, evidenced by apical closure, slight increase in root length, and absence of signs of external root resorption, during a follow-up of 1 year and 6 months.

Large Area Silicon Sheet by EFG. [quality control and productivity of edge-defined film-fed growth of ribbons

Science.gov (United States)

1979-01-01

Influences on ribbon quality which might be caused by various materials of construction which are used in the growth furnace were assessed. At the present level of ribbon quality, which has produced 8.5% to 9.5% efficient solar cells, no particular influence of any furnace part was detected. The experiments led to the suspicion that the general environment and the somewhat unoptimized materials handling procedures might be responsible for the current variations in ribbon quality and that, therefore, continuous work with this furnace under rather more stringent environmental conditions and operating procedures could perhaps improve materials quality to some extent. The work on the multiple furnace was continued with two multiple growth runs being performed. In these runs, the melt replenishment system performed poorly and extensive modifications to it were designed to make reliable melt feeding for five ribbon growth possible. Additional characterization techniques for wide ribbons, stress measurements, and growth dynamics experiments are reported.

Characterisation of melt spun Ni-Ti shape memory Ribbons' microstructure

Science.gov (United States)

Mehrabi, Kambiz; Brunčko, Mihael; Kneissl, Albert C.; Čolič, Miodrag; Stamenković, Dragoslav; Ferčec, Janko; Anžel, Ivan; Rudolf, Rebeka

2012-06-01

NiTi alloys are the most technologically important medical Shape Memory Alloys in a wide range of applications used in Orthopaedics, Neurology, Cardiology and interventional Radiology as guide-wires, self-expandable stents, stent grafts, inferior vena cava filters and clinical instruments. This paper discusses the use of rapid solidification by the melt spinning method for the preparation of thin NiTi ribbons for medical uses. Generally, the application of rapid solidification via melt-spinning can change the microstructure drastically, which improves ductility and shape memory characteristics and leads to samples with small dimensions. As the increase in the wheel speed led to a reduced ribbon thickness, the cooling rate increased and, therefore, the martensitic substructure became finer. Furthermore, no transition from the crystalline phase to the amorphous phase was obtained by increasing the cooling rate, even at a wheel speed of 30 m/s. Specimens for our metallographic investigation were cut from the longitudinal cross sections of melt-spun ribbons. Conventional TEM studies were carried out with an acceleration voltage of 120 kV. Additionally, the chemical composition of the samples was examined with a TEM equipped with an EDX analyser. The crystallographic structure was determined using Bragg-Brentano x-ray diffraction with Cu-Kα radiation at room temperature.

Transverse magnetization and giant magnetoimpedance in amorphous ribbons

International Nuclear Information System (INIS)

Orue, I.; Garcia-Arribas, A.; Saad, A.; Cos, D. de; Barandiaran, J.M.

2005-01-01

In the classical approach giant magnetoimpedance (GMI) is driven by the transverse permeability of the sample, as excited by the current flowing through it. Transverse permeability is usually taken as a constant, while detailed magnetization processes are important for the interpretation of GMI data. In most cases the transverse permeability (or magnetization) is only guessed by looking at the longitudinal magnetization curve and direct determinations of such parameter are scarce in the literature. In this work we report on the operation of a simple setup which provides the transverse magnetization of amorphous ribbons as a function of the current intensity flowing through it, by means of the magnetooptical kerr effect (MOKE). The system has been tested on low magnetostriction amorphous ribbons of very soft character with both longitudinal and transverse anisotropy. The transverse magnetization as a function of both the current and a DC longitudinal field applied, was compared with magneto impedance measurements

Magnetoimpedance studies on urine treated Co{sub 66}Ni{sub 7}Si{sub 7}B{sub 20} ribbons

Energy Technology Data Exchange (ETDEWEB)

Kotagiri, Ganesh [Advanced Magnetic Materials Laboratory, Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India); Markandeyulu, G., E-mail: mark@iitm.ac.in [Advanced Magnetic Materials Laboratory, Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India); Doble, Mukesh; Nandakumar, V. [Department of Biotechnology, Indian Institute of Technology Madras, Chennai 600036 (India)

2015-11-15

Magnetoimpedance (MI) response of Co{sub 66}Ni{sub 7}Si{sub 7}B{sub 20} ribbons treated with artificial urine with protein bovine serum albumin (BSA), artificial urine without protein BSA and healthy male urine was studied as a function of time of incubation. The maximum MI [(MI){sub m}] values of the ribbons treated with artificial urine without protein (RTAU) after 3 h, 6 h, 12 h and 24 h of incubation are 30% (at 4 MHz), 15% (at 5 MHz), 14% (at 10 MHz) and 8% (at 13 MHz) respectively. On the other hand, the respective (MI){sub m} values of the ribbons treated with artificial urine with protein (RTAUP) are 33% (at 4 MHz), 25% (at 5 MHz), 20% (at 8 MHz) and 15% (12 MHz). However (MI){sub m} values of the ribbons treated with healthy male urine (RTHMU) after 4 h, 5 h, 10 h and 15 h of incubation are 71% (at 3 MHz), 57% (at 3 MHz), 25% (at 6 MHz) and 25% (at 5 MHz), respectively. The saturation magnetization (M{sub s}) values of RTAU after 3 h, 6 h, 12 h and 24 h of incubation are 71 emu/g, 65 emu/g, 63 emu/g and 60 emu/g respectively whereas, the respective M{sub s} values of RTAUP are 73 emu/g, 69 emu/g, 67 emu/g and 64 emu/g. The M{sub s} values of RTHMU after 4 h, 5 h, 10 h and 15 h of incubation are 96 emu/g, 90 emu/g, 75 emu/g and 75 emu/g respectively. The decrease in M{sub s} and (MI){sub m} values in RTAU and RTAUP compared to as-quenched ribbon is related to the amounts of various elements etched out from the ribbons and increased surface roughness. The M{sub s} and (MI){sub m} values of RTHMU are seen to have increased after 4 h and 5 h of incubation, due to strain relaxation through removal of strain developed during rapid quenching of the ribbons. On the other hand, the M{sub s} and (MI){sub m} values of RTHMU after 10 h and 15 h have decreased due to deterioration of the surface of the ribbons and thus, increase in magnetic (surface) anisotropy. The decrease in (MI){sub m} and M{sub S} of RTAU with the time of incubation are more rapid compared to that

Fin Ray Stiffness and Fin Morphology Control Ribbon-Fin-Based Propulsion.

Science.gov (United States)

Liu, Hanlin; Taylor, Bevan; Curet, Oscar M

2017-06-01

Ribbon-fin-based propulsion has rich locomotor capabilities that can enhance the mobility and performance of underwater vehicles navigating in complex environments. Bony fishes using this type of propulsion send one or multiple traveling waves along an elongated fin with the actuation of highly flexible rays that are interconnected by an elastic membrane. In this work, we study how the use of flexible rays and different morphology can affect the performance of ribbon-fin propulsion. We developed a physical model composed of 15 rays that are interconnected with an elastic membrane. We tested four different ray flexural stiffness and four aspect ratios. The robotic model was tested in a low-turbulence flume under two flow conditions ([Formula: see text] wavelength/s). In two experimental sets, we measured fin kinematics, net surge forces, and power consumption. Using these data, we perform a thrust and power analysis of the undulating fin. We present the thrust coefficient, power coefficient, and propulsive efficiency. We find that the thrust generation was linear with the enclosed area swept by the fin, and square of the relative velocity between the incoming flow and traveling wave. The thrust coefficient levels off around 0.5. In addition, for our parameter range, we find that the power consumption scales by the cube of the effective tangential velocity of the rays [Formula: see text] (A is the amplitude of the ray oscillating motion, and [Formula: see text] is the angular velocity). We show that a decay in stiffness decreases both thrust production and power consumption. However, for rays with high flexural stiffness, the difference in thrust compared with rigid rays is minimal. Moreover, our results show that flexible rays can improve the propulsive efficiency compared with a rigid counterpart. Finally, we find that the morphology of ribbon fin affects its propulsive efficiency. For the aspect ratio considered in our experiments, [Formula: see text] was the most

Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons

Directory of Open Access Journals (Sweden)

Zahra Jamili-Shirvan

2013-12-01

Full Text Available The nanocrystallization of Co67Fe4Cr7Si8B14 amorphous ribbons which prepared by planar flow melt spinning process (PFMS was investigated. Crystallization of the ribbons was studied by differential thermal analysis (DTA, X-ray diffraction (XRD and transmission electron microscopy (TEM. The DTA result of amorphous ribbon at heating rate of 10˚C/min showedoccurrence of phase transitions in two stages. The ribbons were isothermally annealed for 30 minutes in argon atmosphere at different temperatures between 300 and 650ºC with 25ºC steps. The magnetic properties of annealed samples were measured using a vibrating sample magnetometer (VSM. The VSM results revealed that optimum soft magnetic properties occurred at 400ºC. XRD patterns showed that the samples isothermally annealed up to 450ºC were amorphous, while TEM results at 400ºC indicated 7-8 nm mean size nanocrytallites in amorphous matrix and size of the nanocrystallites increased by increasing temperature. Also by X-ray diffraction pattern, precipitation of different phases at higher temperatures confirmed.

Bending cyclic load test for crystalline silicon photovoltaic modules

Science.gov (United States)

Suzuki, Soh; Doi, Takuya; Masuda, Atsushi; Tanahashi, Tadanori

2018-02-01

The failures induced by thermomechanical fatigue within crystalline silicon photovoltaic modules are a common issue that can occur in any climate. In order to understand these failures, we confirmed the effects of compressive or tensile stresses (which were cyclically loaded on photovoltaic cells and cell interconnect ribbons) at subzero, moderate, and high temperatures. We found that cell cracks were induced predominantly at low temperatures, irrespective of the compression or tension applied to the cells, although the orientation of cell cracks was dependent on the stress applied. The fracture of cell interconnect ribbons was caused by cyclical compressive stress at moderate and high temperatures, and this failure was promoted by the elevation of temperature. On the basis of these results, the causes of these failures are comprehensively discussed in relation to the viscoelasticity of the encapsulant.

Overexpression of guanylate cyclase activating protein 2 in rod photoreceptors in vivo leads to morphological changes at the synaptic ribbon.

Directory of Open Access Journals (Sweden)

Natalia López-del Hoyo

Full Text Available Guanylate cyclase activating proteins are EF-hand containing proteins that confer calcium sensitivity to retinal guanylate cyclase at the outer segment discs of photoreceptor cells. By making the rate of cGMP synthesis dependent on the free intracellular calcium levels set by illumination, GCAPs play a fundamental role in the recovery of the light response and light adaptation. The main isoforms GCAP1 and GCAP2 also localize to the synaptic terminal, where their function is not known. Based on the reported interaction of GCAP2 with Ribeye, the major component of synaptic ribbons, it was proposed that GCAP2 could mediate the synaptic ribbon dynamic changes that happen in response to light. We here present a thorough ultrastructural analysis of rod synaptic terminals in loss-of-function (GCAP1/GCAP2 double knockout and gain-of-function (transgenic overexpression mouse models of GCAP2. Rod synaptic ribbons in GCAPs-/- mice did not differ from wildtype ribbons when mice were raised in constant darkness, indicating that GCAPs are not required for ribbon early assembly or maturation. Transgenic overexpression of GCAP2 in rods led to a shortening of synaptic ribbons, and to a higher than normal percentage of club-shaped and spherical ribbon morphologies. Restoration of GCAP2 expression in the GCAPs-/- background (GCAP2 expression in the absence of endogenous GCAP1 had the striking result of shortening ribbon length to a much higher degree than overexpression of GCAP2 in the wildtype background, as well as reducing the thickness of the outer plexiform layer without affecting the number of rod photoreceptor cells. These results indicate that preservation of the GCAP1 to GCAP2 relative levels is relevant for maintaining the integrity of the synaptic terminal. Our demonstration of GCAP2 immunolocalization at synaptic ribbons at the ultrastructural level would support a role of GCAPs at mediating the effect of light on morphological remodeling changes of

Third nearest neighbor parameterized tight binding model for graphene nano-ribbons

Directory of Open Access Journals (Sweden)

Van-Truong Tran

2017-07-01

Full Text Available The existing tight binding models can very well reproduce the ab initio band structure of a 2D graphene sheet. For graphene nano-ribbons (GNRs, the current sets of tight binding parameters can successfully describe the semi-conducting behavior of all armchair GNRs. However, they are still failing in reproducing accurately the slope of the bands that is directly associated with the group velocity and the effective mass of electrons. In this work, both density functional theory and tight binding calculations were performed and a new set of tight binding parameters up to the third nearest neighbors including overlap terms is introduced. The results obtained with this model offer excellent agreement with the predictions of the density functional theory in most cases of ribbon structures, even in the high-energy region. Moreover, this set can induce electron-hole asymmetry as manifested in results from density functional theory. Relevant outcomes are also achieved for armchair ribbons of various widths as well as for zigzag structures, thus opening a route for multi-scale atomistic simulation of large systems that cannot be considered using density functional theory.

Development of variable width ribbon heating elements for liquid metal and gas-cooled fast breeder reactor fuel rod simulators

International Nuclear Information System (INIS)

McCulloch, R.W.; Lovell, R.T.; Post, D.W.; Snyder, S.D.

1980-01-01

Variable width ribbon heating elements have been fabricated which provide a chopped cosine, variable heat flux profile for fuel rod simulators used in test loops by the Breeder Reactor Program Thermal Hydraulic Out-of-Reactor Safety test facility and the Gas-Cooled Fast Breeder Reactor Core Flow Test Loop. Thermal, mechanical, and electrical design considerations result in the derivation of an analytical expression for the ribbon contours. From this, the ribbons are machined and wound on numerically controlled equipment. Postprocessing and inspection results in a wound, variable width ribbon with the precise dimensional, electrical, and mechanical properties needed for use in fuel pin simulators

Microstructure evolution in the rapidly quenched Fe{sub 78}Si{sub 9}B{sub 13} ribbons

Energy Technology Data Exchange (ETDEWEB)

Wang, W.-M., E-mail: weiminw@sdu.edu.c [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China); Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Jin, S.F. [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China); Institute of Physics, Chinese Academy of Sciences, Beijing 100080 (China); Zhang, J.T.; Huang, T.; Wang, L.; Bian, X.F. [Key Lab of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061 (China)

2009-11-01

We report microstructure evolution in as-spun Fe{sub 78}Si{sub 9}B{sub 13} ribbons under various wheel speeds (s), which was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). With decreasing s, the volume fraction of the residual amorphous phase (V{sub a}) in the as-spun ribbons decreases gradually, and the total exothermic heat of the crystallization in the DSC curves also decreases, but the ratio of the exothermic heat of the second crystallization to the first one is on the contrary. alpha-Fe is found in the ribbon with s of 32.9 m/s, while alpha-Fe, eutectic alpha-Fe+Fe{sub 2}B, and Fe{sub 3}Si phases are found in ribbons with s of 25.6 and 18.3 m/s. The phase precipitating behavior in cooling processes is well consistent with the annealing process in the literatures.

Characterization of consolidated rapidly solidified Cu-Nb ribbons

International Nuclear Information System (INIS)

Ebrahimi, F.; Henne, M.L.C.

1997-01-01

Copper-niobium ribbons produced by melt-spinning were compacted by swaging and consolidated using HIPping. Final processing to obtain in-situ composites was done by swaging. The strength of the composite is discussed in terms of the composition and morphology of the niobium phase as evaluated using electron microscopy techniques

Long-range ferromagnetism and magnetocaloric effects in rapidly quenched Ni50−xCoxMn50−yAly ribbons

Directory of Open Access Journals (Sweden)

Nguyen Thi Mai

2017-03-01

Full Text Available Ni50−xCoxMn50−yAly (x = 7 and 9; y = 17, 18 and 19 alloy ribbons were prepared by melt-spinning with a tangential velocity of copper wheel of 40 m s−1. X-ray diffraction patterns reveal multi-crystalline phase behavior in the fabricated ribbons. The shape of thermomagnetization curves clearly depends on Co and Al concentrations. The Curie temperatures (TC of the alloy ribbons strongly increase with increasing the Co concentration and slightly decrease with increasing the Al concentration. The martensitic-austenitic phase transition in the alloy ribbons can be manipulated by tuning Co and Al concentrations. The maximum magnetic entropy change |ΔSm|max of about 0.75 J kg−1 K−1 for a field change of 12 kOe at TC ≈ 364 K was achieved for the Ni43Co7Mn32Al18 ribbon. Critical analysis using the Arrott-Noaks and Kouvel–Fisher methods demonstrates the existence of a long-range ferromagnetic order in this ribbon.

Effects of pre-deformation on the martensitic transformation and magnetocaloric property in Ni-Mn-Co-Sn ribbons

International Nuclear Information System (INIS)

Ma Sheng-Can; Xuan Hai-Cheng; Zhang Cheng-Liang; Wang Liao-Yu; Cao Qing-Qi; Wang Dun-Hui; Du You-Wei

2010-01-01

This paper investigates the martensitic transformation and magnetocaloric effect in pre-deformed Ni-Mn-Co-Sn ribbons. The experimental results show that the reverse martensitic transformation temperature T M increases with the increasing pre-pressure, suggesting that pre-deformation is another effective way to adjust T M in ferromagnetic shape memory alloys. Large magnetic entropy changes and refrigerant capacities are obtained in these ribbons as well. It also discusses the origin of the enhanced martensitic transformation temperature and magnetocaloric property in pre-deformed Ni-Mn-Co-Sn ribbons

Universal method for opnimal design main structural assemblies of steel structures stationary conveyor with hanging ribbon

Directory of Open Access Journals (Sweden)

Boslovyak P.V.

2015-10-01

Full Text Available The technique and the detailed algorithm for optimal design of steel structures hospitaltion of the conveyor with hang-ing ribbon. Developed a universal objective function together with the system-limited-subject to limits of main components of steel structures of stationary conveyor with hanging ribbon.

Structural and Electrical Properties Characterization of Sb1.52Bi0.48Te3.0 Melt-Spun Ribbons

Directory of Open Access Journals (Sweden)

Viktoriia Ohorodniichuk

2017-06-01

Full Text Available Melt-spinning (MS has been reported as a promising tool to tailor the microstructure of bulk thermoelectric materials leading to enhanced thermoelectric performances. Here, we report on a detailed characterization of p-type Bi0.48Sb1.52Te3 ribbons produced by melt-spinning. The microstructure of the melt-spun ribbons has been studied by means of X-ray diffraction, scanning and transmission electron microscopy (TEM. The analyses indicate that the ribbons are highly-textured with a very good chemical homogeneity. TEM reveals clear differences in the microstructure at large and short-range scales between the surface that was in contact with the copper wheel and the free surface. These analyses further evidence the absence of amorphous regions in the melt-spun ribbons and the precipitation of elemental Te at the grain boundaries. Low-temperature electrical resistivity and thermopower measurements (20–300 K carried out on several randomly-selected ribbons confirm the excellent reproducibility of the MS process. However, the comparison of the transport properties of the ribbons with those of bulk polycrystalline samples of the same initial composition shows that MS leads to a more pronounced metallic character. This difference is likely tied to changes in deviations from stoichiometry due to the out-of-equilibrium conditions imposed by MS.

The identification of a sensitizing component used in the manufacturing of an ink ribbon

Science.gov (United States)

Anderson, Stacey E.; Tapp, Loren; Durgam, Srinivas; Meade, B. Jean; Jackson, Laurel G.; Cohen, David E.

2015-01-01

Skin diseases including dermatitis constitute ≈ 30% of all occupational illnesses, with a high incidence in the printing industry. An outbreak of contact dermatitis among employees at an ink ribbon manufacturing plant was investigated by scientists from the National Institute for Occupational Safety and Health (NIOSH). Employees in the process areas of the plant were exposed to numerous chemicals and many had experienced skin rashes, especially after the introduction of a new ink ribbon product. To identify the causative agent(s) of the occupational dermatitis, the murine local lymph node assay (LLNA) was used to identify the potential of the chemicals used in the manufacture of the ink ribbon to induce allergic contact dermatitis. Follow-up patch testing with the suspected allergens was conducted on exposed employees. Polyvinyl butyral, a chemical component used in the manufacture of the ink ribbon in question and other products, tested positive in the LLNA, with an EC3 of 3.6%, which identifies it as a potential sensitizer; however, no employees tested positive to this chemical during skin patch testing. This finding has implications beyond those described in this report because of occupational exposure to polyvinyl butyral outside of the printing industry. PMID:22375946

Bony change of apical lesion healing process using fractal analysis

International Nuclear Information System (INIS)

Lee, Ji Min; Park, Hyok; Jeong, Ho Gul; Kim, Kee Deog; Park, Chang Seo

2005-01-01

To investigate the change of bone healing process after endodontic treatment of the tooth with an apical lesion by fractal analysis. Radiographic images of 35 teeth from 33 patients taken on first diagnosis, 6 months, and 1 year after endodontic treatment were selected. Radiographic images were taken by JUPITER computerized Dental X-ray System. Fractal dimensions were calculated three times at each area by Scion Image PC program. Rectangular region of interest (30 x 30) were selected at apical lesion and normal apex of each image. The fractal dimension at apical lesion of first diagnosis (L 0 ) is 0.940 ± 0.361 and that of normal area (N 0 ) is 1.186 ± 0.727 (p 1 ) is 1.076 ± 0.069 and that of normal area (N 1 ) is 1.192 ± 0.055 (p 2 ) is 1.163 ± 0.074 and that of normal area (N 2 ) is 1.225 ± 0.079 (p<0.05). After endodontic treatment, the fractal dimensions at each apical lesions depending on time showed statistically significant difference. And there are statistically significant different between normal area and apical lesion on first diagnosis, 6 months after, 1 year after. But the differences were grow smaller as time flows. The evaluation of the prognosis after the endodontic treatment of the apical lesion was estimated by bone regeneration in apical region. Fractal analysis was attempted to overcome the limit of subjective reading, and as a result the change of the bone during the healing process was able to be detected objectively and quantitatively.

Ossifying fibroma misdiagnosed as chronic apical periodontitis.

Science.gov (United States)

de Moraes Ramos-Perez, Flávia Maria; Soares, Ulysses Nicida; Silva-Sousa, Yara Teresinha Corrêa; da Cruz Perez, Danyel Elias

2010-03-01

Ossifying fibroma mimicking chronic apical periodontitis is extremely rare. This report describes a case of ossifying fibroma located in the periapical region of the mandibular right canine that was misdiagnosed as chronic apical periodontitis. A 40-year-old woman complained of slight pain in the right anterior mandibular region without mucosal abnormalities or swelling. Radiographically, a well-circumscribed, unilocular, radiolucent lesion was observed that was located in the periapical region of the mandibular right canine, which presented an endodontically treated root canal. Under local anesthesia, the lesion was fully excised. Microscopically, there was fibrocellular connective tissue associated with a mineralized component, which consisted of lamellar or trabecular and woven bone, compatible with the diagnosis of ossifying fibroma. Although it is very rare, ossifying fibroma should be considered in the differential diagnosis of unusual or persistent apical radiolucencies. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Electronic ferroelectricity in carbon-based systems: from reality of organic conductors to promises of polymers and graphene nano-ribbons

International Nuclear Information System (INIS)

Kirova, Natasha; Brazovskii, Serguei

2014-01-01

Ferroelectricity is a rising demand in fundamental and applied solid state physics. Ferroelectrics are used in microelectronics as active gate materials, in capacitors, electro-optical-acoustic modulators, etc. There is a particular demand for plastic ferroelectrics, e.g. as a sensor for acoustic imaging in medicine and beyond, in shapeable capacitors, etc. Microscopic mechanisms of ferroelectric polarization in traditional materials are typically ionic. In this talk we discuss the electronic ferroelectrics – carbon-based materials: organic crystals, conducting polymers and graphene nano-ribbons. The motion of walls, separating domains with opposite electric polarisation, can be influenced and manipulated by terahertz and infra-red range optics

Identification of cyst nematode B-type CLE peptides and modulation of the vascular stem cell pathway for feeding cell formation

Science.gov (United States)

Stem cells are important in the continuous formation of various tissues during postembryonic organogenesis. Stem cell pools in the SAM (shoot apical meristem), RAM (root apical meristem) and vascular procambium/cambium are regulated by CLE-receptor kinase-WOX signaling modules. Previous data showed ...

76 FR 38648 - Availability of the Geothermal Technologies Program Blue Ribbon Panel Report and Request for...

Science.gov (United States)

2011-07-01

....S. has lagged that of solar and wind energy. The purpose of the Blue Ribbon Panel meeting was to... Geothermal Technologies Program Blue Ribbon Panel Report and Request for Public Comment AGENCY: Office of... Panel (the Panel) on March 22/23, 2011 in Albuquerque, New Mexico for a guided discussion on the future...

Fish Marketing of Ribbon Fish (Trichiurus sp. in Nusantara Fishing Port (NFPat Palabuhanratu, West Java

Directory of Open Access Journals (Sweden)

Nur Bambang Azis

2018-01-01

Full Text Available The objective of this research is to study the marketing process of ribbon fish (Trichiurus sp., including the marketing margin, marketing agencies, traders and marketing channels The research was carried out for 3 mo in Nusantara Fishing Port (NFP, Palabuhanratu, Sukabumi, West Java. A case study was used in this research. A purposive sampling method was used to collect data from 55 respondents of fish marketing, consisting of fishermen, agents, traders, and retailers, who were involved in the marketing of ribbon fish in NFP Palabuhanratu. The result of the research showed that ribbon fish production in Palabuhanratu fluctuated from year to year. There are two types of ribbon fish marketing, i.e. type one is from fishermen to retailers, and type two is indirect marketing from fisherman to consumers through intermediate traders (exporters. The greatest marketing margin was obtained from the first type, while the smallest marketing margin was obtained from type two. The form of the market was considered to be oligopsony market. Fisherman’s share is greatest in the collectors and the smallest share is on retailers. Marketing process in traders is efficient due to its lowest margin and highest fisherman’s share.

Effects of the ingot phase transition on microstructure and magnetic properties of CeNdFeB melt-spun ribbons

Energy Technology Data Exchange (ETDEWEB)

Wang, Xuchao [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); College of Sciences, Northeastern University, Shenyang 110819 (China); Zhu, Minggang, E-mail: mgzhu@126.com [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); Li, Wei; Zheng, Liyun; Guo, Zhaohui; Du, Xiao [Division of Functional Materials Research, Central Iron and Steel Research Institute, Beijing 100081, China (China); Du, An [College of Sciences, Northeastern University, Shenyang 110819 (China)

2015-11-01

The paper studies the phase transition of ingot with the composition (Ce{sub 50}Nd{sub 50}){sub 30}Fe{sub bal}Co{sub 4}Ga{sub 0.2}B{sub 0.92} after the annealing treatment at 1050 °C. The melt-spun ribbons which is prepared by the two treatment status ingots. The phase structure and microstructure morphologies of the ingots and melt-spun ribbons were analysed and observed by XRD and SEM. It was found that the grain size of the ribbons is on the nanometer scale. The EDS results show that there are four different phases in the ingot: (CeNd){sub 2}Fe{sub 14}B, α-Fe, Ce-rich phase and Nd-rich phase. After the annealing treatment, α-Fe, Ce-rich phase, and Nd-rich phase were obviously reduced and the contents of the main phase was significantly increased in the annealed ingot compared with the unanneal treatment ingot. The VSM results show that there is a peak waist in the ribbon which is prepared by the untreated ingot. Because the ingot is uneven, the ribbons may have the secondary phase, the Hcj is 8394 Oe. But the demagnetization curves of the ribbons, which is prepared by the annealed ingot, is relatively smooth and without the soft magnetic phase and the Hcj is 12,528 Oe, which is higher than the unanneal treatment ingot. We can know that the ingot with fine organization is the key factors to preparing high-performance ribbons.

77 FR 32938 - Narrow Woven Ribbons With Woven Selvedge From Taiwan: Preliminary Results of Antidumping Duty...

Science.gov (United States)

2012-06-04

... ribbons subject to the order include all narrow woven fabrics, tapes, and labels that fall within this... the manufacture of typewriter or printer ribbons; (5) Narrow woven labels and apparel tapes, cut-to... 1994 U.S.C.C.A.N. 4040, 4198-99. Furthermore, ``affirmative evidence of bad faith on the part of a...

Magnetic and surface properties of Fe-Nb (Mo, V)-Cu-B-Si ribbons

International Nuclear Information System (INIS)

Butvinova, B.; Butvin, P.; Svec, P. Sr.; Matko, I.; Svec, P.; Janickovic, D.; Kadlecikova, M.

2014-01-01

The rapidly quenched Finemet (FeNbCuBSi) ribbons prepared by planar flow casting of the melt are very variable to obtain very good soft-magnetic properties. An appropriate thermal treatment leading to ultra-fine grain structure enables to attain such properties as desired for practical use. Increasing Fe percentage to the detriment of non-magnetic components lifts saturation induction above 1.3 T, preserves low coercivity and makes the alloy even cheaper to suit its mass production for use in power electronics. Apart from the plenty of benefits the ribbons show some risks. One of them is macroscopic heterogeneity, which often manifests via differences between surfaces and interior of a ribbon [3]. The surfaces squeeze (by in-plane force) the interior of many such ribbons and if engaged in magnetoelastic interaction, the force affects the resulting magnetic anisotropy [4]. Current research shows that changes of hysteresis loop shape come rather from surface crystallization and not from oxides namely in positively magnetostrictive alloys FeNbCuBSi known as low- Si Finemets. The object of this work is to verify whether the substitution of another element instead of Nb (usually incorporated as the grain-growth blocker) can change surface properties and affects the resulting magnetic properties. We chose V and Mo instead of Nb. Oxides, oxyhydroxides and a possible squeezing layer was looked for after higher temperature annealing which ensures partially nanocrystalline structure. (authors)

Monocyte chemotactic protein-3: possible involvement in apical periodontitis chemotaxis.

Science.gov (United States)

Dezerega, A; Osorio, C; Mardones, J; Mundi, V; Dutzan, N; Franco, M; Gamonal, J; Oyarzún, A; Overall, C M; Hernández, M

2010-10-01

To study the expression of monocyte chemotactic protein-3 (MCP-3, also known as chemokine CCL-7) in tissue from apical lesions (AL) and to associate MCP-3 expression with symptomatic or asymptomatic apical periodontitis. To determine the expression of MCP-3 in AL, biopsies obtained during tooth extraction procedures were fixed, subjected to routine processing and diagnosed as apical granuloma (AG) (n = 7) or radicular cyst (RC) (n = 5). As controls, apical periodontal ligament (PDL) specimens from healthy premolars extracted for orthodontics reasons were included (n = 7). All specimens were immunostained for MCP-3 and examined under a light microscope. In addition, homogenates from AL (n = 14) and healthy PDL samples (n = 7) were studied through immunowestern blot. Finally, periapical exudates samples were collected from root canals of teeth having diagnosis of symptomatic (n = 14) and asymptomatic apical periodontitis (n = 14) during routine endodontic treatments and analysed by immunowestern blot and densitometry.   MCP-3 was detected in AG and RC and localized mainly to inflammatory leucocytes, whereas no expression was observed in healthy PDLs. MCP-3 was also detected in periapical exudate, and its levels were significantly higher in symptomatic than in asymptomatic apical periodontitis. MCP-3 was expressed in AL and its levels associated with clinical symptoms. MCP-3 might play a role in disease pathogenesis, possibly by stimulating mononuclear chemotaxis. © 2010 International Endodontic Journal.

Histology of periapical lesions obtained during apical surgery.

Science.gov (United States)

Schulz, Malte; von Arx, Thomas; Altermatt, Hans Jörg; Bosshardt, Dieter

2009-05-01

The aim of this was to evaluate the histology of periapical lesions in teeth treated with periapical surgery. After root-end resection, the root tip was removed together with the periapical pathological tissue. Histologic sectioning was performed on calcified specimens embedded in methylmethacrylate (MMA) and on demineralized specimens embedded in LR White (Fluka, Buchs, Switzerland). The samples were evaluated with light and transmission electron microscopy (TEM). The histologic findings were classified into periapical abscesses, granulomas, or cystic lesions (true or pocket cysts). The final material comprised 70% granulomas, 23% cysts and 5% abscesses, 1% scar tissues, and 1% keratocysts. Six of 125 samples could not be used. The cystic lesions could not be subdivided into pocket or true cysts. All cysts had an epithelium-lined cavity, two of them with cilia-lined epithelium. These results show the high incidence of periapical granulomas among periapical lesions obtained during apical surgery. Periapical abscesses were a rare occasion. The histologic findings from samples obtained during apical surgery may differ from findings obtained by teeth extractions. A determination between pocket and true apical cysts is hardly possible when collecting samples by apical surgery.

Pro-oxidant status and matrix metalloproteinases in apical lesions and gingival crevicular fluid as potential biomarkers for asymptomatic apical periodontitis and endodontic treatment response

Directory of Open Access Journals (Sweden)

Dezerega Andrea

2012-03-01

Full Text Available Abstract Background Oxidative stress and matrix metalloproteinases -9 and -2 are involved in periodontal breakdown, whereas gingival crevicular fluid has been reported to reflect apical status. The aim of this study was to characterize oxidant balance and activity levels of MMP -2 and -9 in apical lesions and healthy periodontal ligament; and second, to determine whether potential changes in oxidant balance were reflected in gingival crevicular fluid from asymptomatic apical periodontitis (AAP-affected teeth at baseline and after endodontic treatment. Methods Patients with clinical diagnosis of AAP and healthy volunteers having indication of tooth extraction were recruited. Apical lesions and healthy periodontal ligaments, respectively, were homogenized or processed to obtain histological tissue sections. Matrix metalloproteinase -9 and -2 levels and/or activity were analyzed by Immunowestern blot, zymography and consecutive densitometric analysis, and their tissue localization was confirmed by immunohistochemistry. A second group of patients with AAP and indication of endodontic treatment was recruited. Gingival crevicular fluid was extracted from AAP-affected teeth at baseline, after endodontic treatment and healthy contralateral teeth. Total oxidant and antioxidant status were determined in homogenized tissue and GCF samples. Statistical analysis was performed using STATA v10 software with unpaired t test, Mann-Whitney test and Spearman's correlation. Results Activity of MMP-2 and MMP-9 along with oxidant status were higher in apical lesions (p Conclusions Apical lesions display an oxidant imbalance along with increased activity of matrix metalloproteinase-2 and -9 and might contribute to AAP progression. Oxidant imbalance can also be reflected in GCF from AAP-affected teeth and was restored to normal levels after conservative endodontic treatment. These mediators might be useful as potential biomarkers for chair-side complementary diagnostic

Pro-oxidant status and matrix metalloproteinases in apical lesions and gingival crevicular fluid as potential biomarkers for asymptomatic apical periodontitis and endodontic treatment response.

Science.gov (United States)

Dezerega, Andrea; Madrid, Sonia; Mundi, Verónica; Valenzuela, María A; Garrido, Mauricio; Paredes, Rodolfo; García-Sesnich, Jocelyn; Ortega, Ana V; Gamonal, Jorge; Hernández, Marcela

2012-03-21

Oxidative stress and matrix metalloproteinases -9 and -2 are involved in periodontal breakdown, whereas gingival crevicular fluid has been reported to reflect apical status. The aim of this study was to characterize oxidant balance and activity levels of MMP -2 and -9 in apical lesions and healthy periodontal ligament; and second, to determine whether potential changes in oxidant balance were reflected in gingival crevicular fluid from asymptomatic apical periodontitis (AAP)-affected teeth at baseline and after endodontic treatment. Patients with clinical diagnosis of AAP and healthy volunteers having indication of tooth extraction were recruited. Apical lesions and healthy periodontal ligaments, respectively, were homogenized or processed to obtain histological tissue sections. Matrix metalloproteinase -9 and -2 levels and/or activity were analyzed by Immunowestern blot, zymography and consecutive densitometric analysis, and their tissue localization was confirmed by immunohistochemistry. A second group of patients with AAP and indication of endodontic treatment was recruited. Gingival crevicular fluid was extracted from AAP-affected teeth at baseline, after endodontic treatment and healthy contralateral teeth. Total oxidant and antioxidant status were determined in homogenized tissue and GCF samples. Statistical analysis was performed using STATA v10 software with unpaired t test, Mann-Whitney test and Spearman's correlation. Activity of MMP-2 and MMP-9 along with oxidant status were higher in apical lesions (p Apical lesions display an oxidant imbalance along with increased activity of matrix metalloproteinase-2 and -9 and might contribute to AAP progression. Oxidant imbalance can also be reflected in GCF from AAP-affected teeth and was restored to normal levels after conservative endodontic treatment. These mediators might be useful as potential biomarkers for chair-side complementary diagnostic of apical status in GCF.

Combined effects of vertical and lateral confinement on the magnetic properties of MnAs micro and nano-ribbons

Energy Technology Data Exchange (ETDEWEB)

Steren, L. B.; Tortarolo, M. [Centro Atómico Constituyentes CNEA, 1650 San Martín (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, C1033AAJ Buenos Aires (Argentina); Fernandez Baldis, F.; Sirena, M. [Consejo Nacional de Investigaciones Científicas y Técnicas, C1033AAJ Buenos Aires (Argentina); Centro Atómico Bariloche and Instituto Balseiro, CNEA, 8400 S. C. de Bariloche (Argentina); Sacchi, M.; Eddrief, M. [Sorbonne Universités, UPMC Univ. Paris 06, UMR 7588, INSP, 4 place Jussieu, F-75005 Paris (France); CNRS, UMR 7588, Institut des Nanosciences de Paris, 4 place Jussieu, F-75005 Paris (France); Etgens, V. H. [Fédération Lavoisier Franklin, UVSQ, 78035 Versailles Cedex (France); Santos, B.; Mentes, T. O.; Locatelli, A. [Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza, Trieste (Italy)

2016-09-07

The micromagnetic domain structure of MnAs films gave place to an intense research activity in the last few years due to its potential application in magneto-electronic devices such as domain-wall track memories and logic circuits. These applications require a full knowledge of miniaturization effects on the magnetic properties of the material. In this work, X-ray photoemission electron microscopy has been used for imaging magnetic domains in lithographically fabricated MnAs ribbons, addressing the dependence of the domain configuration on film thickness and ribbon width. Our experiments show a transition from head-on to regular stripe domains below a critical width/thickness ratio w{sub c} ≈ 6. Micromagnetic simulations suggest that this transition is correlated to the magnetic structure of the surface plane. Depending on the ribbon width and thickness, the magnetic configuration is shown to evolve from flux-closure domain structure to a state of almost homogeneous magnetization, observed for narrower ribbons. The evolution of the domain structure, magnetic fraction, and magnetization with temperature has been studied across the ferromagnetic/paramagnetic transition. Our experiments show that the magnetic configuration in ribbons exhibits higher stability to temperature variations than in as-cast films.

Combined effects of vertical and lateral confinement on the magnetic properties of MnAs micro and nano-ribbons

International Nuclear Information System (INIS)

Steren, L. B.; Tortarolo, M.; Fernandez Baldis, F.; Sirena, M.; Sacchi, M.; Eddrief, M.; Etgens, V. H.; Santos, B.; Mentes, T. O.; Locatelli, A.

2016-01-01

The micromagnetic domain structure of MnAs films gave place to an intense research activity in the last few years due to its potential application in magneto-electronic devices such as domain-wall track memories and logic circuits. These applications require a full knowledge of miniaturization effects on the magnetic properties of the material. In this work, X-ray photoemission electron microscopy has been used for imaging magnetic domains in lithographically fabricated MnAs ribbons, addressing the dependence of the domain configuration on film thickness and ribbon width. Our experiments show a transition from head-on to regular stripe domains below a critical width/thickness ratio w_c ≈ 6. Micromagnetic simulations suggest that this transition is correlated to the magnetic structure of the surface plane. Depending on the ribbon width and thickness, the magnetic configuration is shown to evolve from flux-closure domain structure to a state of almost homogeneous magnetization, observed for narrower ribbons. The evolution of the domain structure, magnetic fraction, and magnetization with temperature has been studied across the ferromagnetic/paramagnetic transition. Our experiments show that the magnetic configuration in ribbons exhibits higher stability to temperature variations than in as-cast films.

Prevalence of ciliated epithelium in apical periodontitis lesions.

Science.gov (United States)

Ricucci, Domenico; Loghin, Simona; Siqueira, José F; Abdelsayed, Rafik A

2014-04-01

This article reports on the morphologic features and the frequency of ciliated epithelium in apical cysts and discusses its origin. The study material consisted of 167 human apical periodontitis lesions obtained consecutively from patients presenting for treatment during a period of 12 years in a dental practice operated by one of the authors. All of the lesions were obtained still attached to the root apices of teeth with untreated (93 lesions) or treated canals (74 lesions). The former were obtained by extraction and the latter by extraction or apical surgery. Specimens were processed for histopathologic and histobacteriologic analyses. Lesions were classified, and the type of epithelium, if present, was recorded. Of the lesions analyzed, 49 (29%) were diagnosed as cysts. Of these, 26 (53%) were found in untreated teeth, and 23 (47%) related to root canal-treated teeth. Ciliated columnar epithelium was observed partially or completely lining the cyst wall in 4 cysts, and all of them occurred in untreated maxillary molars. Three of these lesions were categorized as pocket cysts, and the other was a true cyst. Ciliated columnar epithelium-lined cysts corresponded to approximately 2% of the apical periodontitis lesions and 8% of the cysts of endodontic origin in the population studied. This epithelium is highly likely to have a sinus origin in the majority of cases. However, the possibility of prosoplasia or upgraded differentiation into ciliated epithelium from the typical cystic lining squamous epithelium may also be considered. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Apical extrusion of debris using reciprocating files and rotary ...

African Journals Online (AJOL)

Procedure: Sixty extracted human mandibular premolars were used. The root canals were instrumented using reciprocating (WaveOne, Reciproc, SafeSider) or rotary ... and cross‑sections, and kinematics, and this situation may influence the amount of apically extruded debris through the apical foramen.[15]. The aim of this ...

Incidental apical disease at CT scanning

International Nuclear Information System (INIS)

McLoud, T.C.; Satoh, K.; Shepard, J.O.; Moore, E.H.; Kosiuk, J.P.

1990-01-01

Apical caps are commonly noted on standard radiographs. This paper determines how often abnormalities in the extreme apex of the lung could be identified on CT scans obtained for other reasons. A total of 158 consecutive CT scans were reviewed prospectively. Excluded were patients with obvious upper lobe pleural or parenchymal disease. Apical abnormalities were identified in 74 (46.8%) of the 158 cases. The prevalence increased with age (19% in the 8-39-year age group and 82% in patients older than 80 years). Opacities were unilateral in 44.5% and bilateral in 55.5%. The most common abnormality was linear opacities (95%)

Frequency and levels of candidate endodontic pathogens in acute apical abscesses as compared to asymptomatic apical periodontitis

Science.gov (United States)

Rôças, Isabela N.

2018-01-01

Introduction Acute apical abscess is caused by bacteria that leave the infected dental root canal to invade the periodontal tissues. Most species occurring in abscesses are also found in asymptomatic infections; therefore, the possibility exists that not only the presence of certain species but also their specific counts influence the appearance of symptoms. This molecular study compared the frequency and levels of several candidate endodontic pathogens in teeth with acute apical abscesses and asymptomatic apical periodontitis. Methods Samples were taken from the root canals of teeth with asymptomatic apical periodontitis (n = 73) and by aspiration of purulent exudate from acute abscesses (n = 55). DNA was extracted from samples and bacterial identifications were performed by a closed-ended semi-quantitative reverse-capture checkerboard approach targeting 40 bacterial species/phylotypes. Results Bacterial DNA was detected in all cases. In abscesses, the most prevalent taxa were Fusobacterium nucleatum (60%), Porphyromonas endodontalis (53%), Parvimonas micra (51%), and Streptococcus species (45%). The most frequently detected taxa in asymptomatic teeth were P. endodontalis (63%), Dialister invisus (58%), Olsenella uli (56%), and F. nucleatum (51%). None of the targeted taxa were significantly associated with abscesses when only mere presence was evaluated (p>0.05). However, semi-quantitative data demonstrated that P. endodontalis, Prevotella baroniae, Treponema denticola and Streptococcus species were significantly more frequent at levels >105 in abscesses than in asymptomatic cases (pabscesses in terms of frequency. However, some taxa were significantly found in higher levels in abscesses. Presence of a potentially virulent pathogen in high counts may increase the collective pathogenicity of the bacterial community and give rise to symptoms. PMID:29293651

Frequency and levels of candidate endodontic pathogens in acute apical abscesses as compared to asymptomatic apical periodontitis.

Science.gov (United States)

Rôças, Isabela N; Siqueira, José F

2018-01-01

Acute apical abscess is caused by bacteria that leave the infected dental root canal to invade the periodontal tissues. Most species occurring in abscesses are also found in asymptomatic infections; therefore, the possibility exists that not only the presence of certain species but also their specific counts influence the appearance of symptoms. This molecular study compared the frequency and levels of several candidate endodontic pathogens in teeth with acute apical abscesses and asymptomatic apical periodontitis. Samples were taken from the root canals of teeth with asymptomatic apical periodontitis (n = 73) and by aspiration of purulent exudate from acute abscesses (n = 55). DNA was extracted from samples and bacterial identifications were performed by a closed-ended semi-quantitative reverse-capture checkerboard approach targeting 40 bacterial species/phylotypes. Bacterial DNA was detected in all cases. In abscesses, the most prevalent taxa were Fusobacterium nucleatum (60%), Porphyromonas endodontalis (53%), Parvimonas micra (51%), and Streptococcus species (45%). The most frequently detected taxa in asymptomatic teeth were P. endodontalis (63%), Dialister invisus (58%), Olsenella uli (56%), and F. nucleatum (51%). None of the targeted taxa were significantly associated with abscesses when only mere presence was evaluated (p>0.05). However, semi-quantitative data demonstrated that P. endodontalis, Prevotella baroniae, Treponema denticola and Streptococcus species were significantly more frequent at levels >105 in abscesses than in asymptomatic cases (p<0.05). None of the target species/phylotypes were associated with abscesses in terms of frequency. However, some taxa were significantly found in higher levels in abscesses. Presence of a potentially virulent pathogen in high counts may increase the collective pathogenicity of the bacterial community and give rise to symptoms.

Neuroelectric Tuning of Cortical Oscillations by Apical Dendrites in Loop Circuits

Directory of Open Access Journals (Sweden)

David LaBerge

2017-06-01

Full Text Available Bundles of relatively long apical dendrites dominate the neurons that make up the thickness of the cerebral cortex. It is proposed that a major function of the apical dendrite is to produce sustained oscillations at a specific frequency that can serve as a common timing unit for the processing of information in circuits connected to that apical dendrite. Many layer 5 and 6 pyramidal neurons are connected to thalamic neurons in loop circuits. A model of the apical dendrites of these pyramidal neurons has been used to simulate the electric activity of the apical dendrite. The results of that simulation demonstrated that subthreshold electric pulses in these apical dendrites can be tuned to specific frequencies and also can be fine-tuned to narrow bandwidths of less than one Hertz (1 Hz. Synchronous pulse outputs from the circuit loops containing apical dendrites can tune subthreshold membrane oscillations of neurons they contact. When the pulse outputs are finely tuned, they function as a local “clock,” which enables the contacted neurons to synchronously communicate with each other. Thus, a shared tuning frequency can select neurons for membership in a circuit. Unlike layer 6 apical dendrites, layer 5 apical dendrites can produce burst firing in many of their neurons, which increases the amplitude of signals in the neurons they contact. This difference in amplitude of signals serves as basis of selecting a sub-circuit for specialized processing (e.g., sustained attention within the typically larger layer 6-based circuit. After examining the sustaining of oscillations in loop circuits and the processing of spikes in network circuits, we propose that cortical functioning can be globally viewed as two systems: a loop system and a network system. The loop system oscillations influence the network system’s timing and amplitude of pulse signals, both of which can select circuits that are momentarily dominant in cortical activity.

Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons

Energy Technology Data Exchange (ETDEWEB)

Dey, Sushmita; Singh, Satnam; Roy, R.K.; Ghosh, M.; Mitra, A.; Panda, A.K., E-mail: akpanda@nmlindia.org

2016-01-01

The present investigation addresses the magnetocaloric behaviour in a series of Ni{sub 77−x}Mn{sub x}Ga{sub 23} (x=23, 24, 25, 27 and 29) rapidly solidified alloys prepared in the form of ribbons by melt spinning technique. The approach of the study is to identify the off-stoichiometric composition wherein room temperature magneto-structural transformation is achieved. The alloy chemistry was tailored through Mn incorporation for Ni such that the magnetic and structural transitions were at close proximity to achieve highest entropy value of ΔS equal to 8.51 J Kg{sup −1} K{sup −1} for #Mn{sub 24} ribbon measured at an applied field of 3 T. When such transitions are more staggered as in #Mn{sub 29} the entropy value of ribbon reduced to as low as 1.61 J Kg{sup −1} K{sup −1}. Near room temperature transformations in #Mn{sub 24} ribbon have been observed through calorimetric and thermomagnetic evaluation. Reverse martensitic transformation (martensite→autstenite) temperature indicates not only distinct change in the saturation flux density but also an inter-martensitic phase. Microstructural analysis of #Mn{sub 24} alloy ribbon revealed structural ordering with the existence of plate morphology evidenced for martensitic phase. - Highlights: • Magnetocaloric effect in a series of melt spun NiMnGa ribbon is addressed. • The alloy series revealed austenitic state as well as its presence with martensite. • The morphology of the ribbons has been shown and discussed through phase analysis. • Influence of magnetising field on entropy and relative cooling power is discussed. • Influence of intermartensitic state on magnetization plots have also been shown.

Oral microbiota species in acute apical endodontic abscesses

OpenAIRE

Noelle George; Erin Flamiatos; Kellie Kawasaki; Namgu Kim; Charles Carriere; Brian Phan; Raphael Joseph; Shay Strauss; Richie Kohli; Dongseok Choi; J. Craig Baumgartner; Christine Sedgley; Tom Maier; Curtis A. Machida

2016-01-01

Background and objectives: Acute apical abscesses are serious endodontic diseases resulting from pulpal infection with opportunistic oral microorganisms. The objective of this study was to identify and compare the oral microbiota in patients (N=18) exhibiting acute apical abscesses, originating from the demographic region in Portland, Oregon. The study hypothesis is that abscesses obtained from this demographic region may contain unique microorganisms not identified in specimens from other re...

Enhanced piezoelectricity and stretchability in energy harvesting devices fabricated from buckled PZT ribbons.

Science.gov (United States)

Qi, Yi; Kim, Jihoon; Nguyen, Thanh D; Lisko, Bozhena; Purohit, Prashant K; McAlpine, Michael C

2011-03-09

The development of a method for integrating highly efficient energy conversion materials onto soft, biocompatible substrates could yield breakthroughs in implantable or wearable energy harvesting systems. Of particular interest are devices which can conform to irregular, curved surfaces, and operate in vital environments that may involve both flexing and stretching modes. Previous studies have shown significant advances in the integration of highly efficient piezoelectric nanocrystals on flexible and bendable substrates. Yet, such inorganic nanomaterials are mechanically incompatible with the extreme elasticity of elastomeric substrates. Here, we present a novel strategy for overcoming these limitations, by generating wavy piezoelectric ribbons on silicone rubber. Our results show that the amplitudes in the waves accommodate order-of-magnitude increases in maximum tensile strain without fracture. Further, local probing of the buckled ribbons reveals an enhancement in the piezoelectric effect of up to 70%, thus representing the highest reported piezoelectric response on a stretchable medium. These results allow for the integration of energy conversion devices which operate in stretching mode via reversible deformations in the wavy/buckled ribbons.

Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled buckling

Science.gov (United States)

Aoki, Michio; Juang, Jia-Yang

2018-02-01

Conventional manufacturing techniques-moulding, machining and casting-exist to produce three-dimensional (3D) shapes. However, these industrial processes are typically geared for mass production and are not directly applicable to residential settings, where inexpensive and versatile tools are desirable. Moreover, those techniques are, in general, not adequate to process soft elastic materials. Here, we introduce a new concept of forming 3D closed hollow shapes from two-dimensional (2D) elastic ribbons by controlled buckling. We numerically and experimentally characterize how the profile and thickness of the ribbon determine its buckled shape. We find a 2D master profile with which various elliptical 3D shapes can be formed. More complex natural and artificial hollow shapes, such as strawberry, hourglass and wheel, can also be achieved via strategic design and pattern engraving on the ribbons. The nonlinear response of the post-buckling regime is rationalized through finite-element analysis, which shows good quantitative agreement with experiments. This robust fabrication should complement conventional techniques and provide a rich arena for future studies on the mechanics and new applications of elastic hollow structures.

Macrophage polarization differs between apical granulomas, radicular cysts, and dentigerous cysts.

Science.gov (United States)

Weber, Manuel; Schlittenbauer, Tilo; Moebius, Patrick; Büttner-Herold, Maike; Ries, Jutta; Preidl, Raimund; Geppert, Carol-Immanuel; Neukam, Friedrich W; Wehrhan, Falk

2018-01-01

Apical periodontitis can appear clinically as apical granulomas or radicular cysts. There is evidence that immunologic factors are involved in the pathogenesis of both pathologies. In contrast to radicular cysts, the dentigerous cysts have a developmental origin. Macrophage polarization (M1 vs M2) is a main regulator of tissue homeostasis and differentiation. There are no studies comparing macrophage polarization in apical granulomas, radicular cysts, and dentigerous cysts. Forty-one apical granulomas, 23 radicular cysts, and 23 dentigerous cysts were analyzed in this study. A tissue microarray (TMA) of the 87 consecutive specimens was created, and CD68-, CD11c-, CD163-, and MRC1-positive macrophages were detected by immunohistochemical methods. TMAs were digitized, and the expression of macrophage markers was quantitatively assessed. Radicular cysts are characterized by M1 polarization of macrophages while apical granulomas show a significantly higher degree of M2 polarization. Dentigerous cysts have a significantly lower M1 polarization than both analyzed periapical lesions (apical granulomas and radicular cysts) and accordingly, a significantly higher M2 polarization than radicular cysts. Macrophage cell density in dentigerous cysts is significantly lower than in the periapical lesions. The development of apical periodontitis towards apical granulomas or radicular cysts might be directed by macrophage polarization. Radicular cyst formation is associated with an increased M1 polarization of infiltrating macrophages. In contrast to radicular cysts, dentigerous cysts are characterized by a low macrophage infiltration and a high degree of M2 polarization, possibly reflecting their developmental rather than inflammatory origin. As M1 polarization of macrophages is triggered by bacterial antigens, these results underline the need for sufficient bacterial clearance during endodontic treatment to prevent a possible M1 macrophage-derived stimulus for radicular cyst

The fast-recycling receptor Megalin defines the apical recycling pathway of epithelial cells

Science.gov (United States)

Perez Bay, Andres E.; Schreiner, Ryan; Benedicto, Ignacio; Paz Marzolo, Maria; Banfelder, Jason; Weinstein, Alan M.; Rodriguez-Boulan, Enrique J.

2016-01-01

The basolateral recycling and transcytotic pathways of epithelial cells were previously defined using markers such as transferrin (TfR) and polymeric IgA (pIgR) receptors. In contrast, our knowledge of the apical recycling pathway remains fragmentary. Here we utilize quantitative live-imaging and mathematical modelling to outline the recycling pathway of Megalin (LRP-2), an apical receptor with key developmental and renal functions, in MDCK cells. We show that, like TfR, Megalin is a long-lived and fast-recycling receptor. Megalin enters polarized MDCK cells through segregated apical sorting endosomes and subsequently intersects the TfR and pIgR pathways at a perinuclear Rab11-negative compartment termed common recycling endosomes (CRE). Whereas TfR recycles to the basolateral membrane from CRE, Megalin, like pIgR, traffics to subapical Rab11-positive apical recycling endosomes (ARE) and reaches the apical membrane in a microtubule- and Rab11-dependent manner. Hence, Megalin defines the apical recycling pathway of epithelia, with CRE as its apical sorting station. PMID:27180806

Fish Marketing of Ribbon Fish (Trichiurus sp.) in Nusantara Fishing Port (NFP)at Palabuhanratu, West Java

Science.gov (United States)

Bambang, Azis Nur

2018-02-01

The objective of this research is to study the marketing process of ribbon fish (Trichiurus sp.), including the marketing margin, marketing agencies, traders and marketing channels The research was carried out for 3 mo in Nusantara Fishing Port (NFP), Palabuhanratu, Sukabumi, West Java. A case study was used in this research. A purposive sampling method was used to collect data from 55 respondents of fish marketing, consisting of fishermen, agents, traders, and retailers, who were involved in the marketing of ribbon fish in NFP Palabuhanratu. The result of the research showed that ribbon fish production in Palabuhanratu fluctuated from year to year. There are two types of ribbon fish marketing, i.e. type one is from fishermen to retailers, and type two is indirect marketing from fisherman to consumers through intermediate traders (exporters). The greatest marketing margin was obtained from the first type, while the smallest marketing margin was obtained from type two. The form of the market was considered to be oligopsony market. Fisherman's share is greatest in the collectors and the smallest share is on retailers. Marketing process in traders is efficient due to its lowest margin and highest fisherman's share.

Apical Hypertrophic Cardiomyopathy in Association with PulmonaryArtery Hypertension

Directory of Open Access Journals (Sweden)

Mehdi Peighambari

2012-09-01

Full Text Available Apical Hypertrophic Cardiomyopathy is an uncommon condition constituting 1% -2% of the cases with Hypertrophic Cardiomyopathy (HCM diagnosis. We interestingly report two patients with apical hypertrophic cardiomyopathy in association with significant pulmonary artery hypertension without any other underlying reason for pulmonary hypertension. The patients were assessed by echocardiography, cardiac catheterization and pulmonary function parameters study.

LHCb: Detector Module Design, Construction and Performance for the LHCb SciFi Tracker

CERN Multimedia

Ekelhof, R

2014-01-01

The Scintillating Fibre (SciFi) Tracker for the LHCb Upgrade (CERN/LHCC 2014-001; LHCb TDR 15) is based on 2.5 m long multi-layered ribbons from 10,000 km of scintillating fibre over 12 planes covering 350 m2. The planes are separated into modular detectors, each with cooled silicon photomultiplier (SiPM) arrays for photo-readout. In this talk, we will present the construction and performance of this novel detector, including the intricacies of scintillating fibre ribbon production, constructing precision detector planes with a rigid and light module design, and the integration of the readout components for this detector. The complexities and issues regarding this active part of the SciFi Tracker will be emphasised along with the current solutions and measured performances.

Magnetic properties of fcc (Co95Fe5)1-xAlx ribbons

International Nuclear Information System (INIS)

Makhlouf, Salah A.; Parker, F.T.; Benameur, T.

1999-01-01

Rapidly quenched (Co 95 Fe 5 ) 1-x Al x ribbons are investigated by X-ray diffraction, magnetization, and Moessbauer effect measurements. A single fcc phase is obtained for all ribbons x ≤ 10 at.%. The lattice constant increases linearly with x and is discussed in connection with magnetic moment. The influence of Al substitution on both magnetization and Fe-atom hyperfine field (H) is studied. At 296 K, the magnetization decreases linearly while H drops nonlinearly as x increases. Al substitution leads to substantial differences in iron hyperfine fields in bcc and fcc systems. Fe moment is perturbed differently by Al substitution in fcc (Co 95 Fe 5 ) 1-x Al x and bcc Fe-Al systems

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material.

Science.gov (United States)

Gu, X N; Li, X L; Zhou, W R; Cheng, Y; Zheng, Y F

2010-06-01

Rapidly solidified (RS) Mg–3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s(-1), 30 m s(-1) and 45 m s(-1) with the as-cast Mg–3Ca alloy ingot as a raw material. The RS45 Mg–3Ca alloy ribbon showed a much more fine grain size feature (approximately 200–500 nm) in comparison to the coarse grain size (50–100 μm)of the original as-cast Mg–3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg–3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds(1.43 mm yr(-1) for RS15, 0.94 mm yr(-1) for RS30 and 0.36 mm yr(-1) for RS45). The RS Mg–3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg–3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg–3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells,whereas the as-cast Mg–3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg–3Ca alloy ribbons than that of the as-cast Mg–3Ca alloy ingot.

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material

International Nuclear Information System (INIS)

Gu, X N; Zhou, W R; Zheng, Y F; Li, X L; Cheng, Y

2010-01-01

Rapidly solidified (RS) Mg-3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s -1 , 30 m s -1 and 45 m s -1 ) with the as-cast Mg-3Ca alloy ingot as a raw material. The RS45 Mg-3Ca alloy ribbon showed a much more fine grain size feature (approximately 200-500 nm) in comparison to the coarse grain size (50-100 μm) of the original as-cast Mg-3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg-3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds (1.43 mm yr -1 for RS15, 0.94 mm yr -1 for RS30 and 0.36 mm yr -1 for RS45). The RS Mg-3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg-3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg-3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells, whereas the as-cast Mg-3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg-3Ca alloy ribbons than that of the as-cast Mg-3Ca alloy ingot.

Apical extrusion of debris in four different endodontic instrumentation systems: A meta-analysis.

Science.gov (United States)

Western, J Sylvia; Dicksit, Daniel Devaprakash

2017-01-01

All endodontic instrumentation systems tested so far, promote apical extrusion of debris, which is one of the main causes of postoperative pain, flare ups, and delayed healing. Of this meta-analysis was to collect and analyze in vitro studies quantifying apically extruded debris while using Hand ProTaper (manual), ProTaper Universal (rotary), Wave One (reciprocating), and self-adjusting file (SAF; vibratory) endodontic instrumentation systems and to determine methods which produced lesser extrusion of debris apically. An extensive electronic database search was done in PubMed, Scopus, Cochrane, LILACS, and Google Scholar from inception until February 2016 using the key terms "Apical Debris Extrusion, extruded material, and manual/rotary/reciprocating/SAF systems." A systematic search strategy was followed to extract 12 potential articles from a total of 1352 articles. The overall effect size was calculated from the raw mean difference of weight of apically extruded debris. Statistically significant difference was seen in the following comparisons: SAF ProTaper. Apical extrusion of debris was invariably present in all the instrumentation systems analyzed. SAF system seemed to be periapical tissue friendly as it caused reduced apical extrusion compared to Rotary ProTaper and Wave One.

A survey of small RNA population during FR-induced apical hook opening

Directory of Open Access Journals (Sweden)

Ying eLi

2014-04-01

Full Text Available Photomorphogenesis is a mechanism employed by plants to regulate their architecture and developmental program in response to light conditions. As they emerge into light for the first time, dark-grown seedlings employ a rapid and finely-controlled photomorphogenic signaling network. Small RNAs have increasingly been revealed to play an important role in regulating multiple aspects of plant development, by modulating the stability of mRNAs. The rapid alteration of the mRNA transcriptome is a known hallmark of the de-etiolation response, thus we investigated the small RNA transcriptome during this process in specific seedling tissues. Here we describe a survey of the small RNA expression profile in four tissues of etiolated soybean seedlings, the cotyledons, hypocotyl and the convex and concave sides of the apical hook. We also investigate how this profile responds to a one-hour far-red light treatment. Our data suggests that miRNAs show a different global profile between these tissues and treatments, suggesting a possible role for tissue- and treatment-specific expression in the differential morphology of the seedling on de-etiolation. Further evidence for the role of miRNA in light-regulated development is given by the de-etiolation responses of a hypomorphic ago1 mutant, which displays reduced and delayed photomorphogenic responses in apical hook and cotyledon angle to far-red light.

Concurrent gradients of ribbon volume and AMPA-receptor patch volume in cochlear afferent synapses on gerbil inner hair cells.

Science.gov (United States)

Zhang, Lichun; Engler, Sina; Koepcke, Lena; Steenken, Friederike; Köppl, Christine

2018-07-01

The Mongolian gerbil is a classic animal model for age-related hearing loss. As a prerequisite for studying age-related changes, we characterized cochlear afferent synaptic morphology in young adult gerbils, using immunolabeling and quantitative analysis of confocal microscopic images. Cochlear wholemounts were triple-labeled with a hair-cell marker, a marker of presynaptic ribbons, and a marker of postsynaptic AMPA-type glutamate receptors. Seven cochlear positions covering an equivalent frequency range from 0.5 - 32 kHz were evaluated. The spatial positions of synapses were determined in a coordinate system with reference to their individual inner hair cell. Synapse numbers confirmed previous reports for gerbils (on average, 20-22 afferents per inner hair cell). The volumes of presynaptic ribbons and postsynaptic glutamate receptor patches were positively correlated: larger ribbons associated with larger receptor patches and smaller ribbons with smaller patches. Furthermore, the volumes of both presynaptic ribbons and postsynaptic receptor patches co-varied along the modiolar-pillar and the longitudinal axes of their hair cell. The gradients in ribbon volume are consistent with previous findings in cat, guinea pig, mouse and rat and further support a role in differentiating the physiological properties of type I afferents. However, the positive correlation between the volumes of pre- and postsynaptic elements in the gerbil is different to the opposing gradients found in the mouse, suggesting species-specific differences in the postsynaptic AMPA receptors that are unrelated to the fundamental classes of type I afferents. Copyright © 2018 Elsevier B.V. All rights reserved.

Fiscal 1976 Sunshine Project result report. R and D on photovoltaic power generation system (R and D on Si ribbon crystal vertical pulling method); 1976 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribbon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-31

This report describes the fiscal 1976 research result on Si ribbon crystal vertical pulling method for photovoltaic power generation systems. The equipment for simultaneous growth of 3 ribbon crystals was designed and prepared in consideration of capillary die arrangement, vertical pulling method and control method of temperature profiles on the die surface. The temperature profiles on the die surface were controlled by subheaters for 3 parts of each capillary die which were divided longitudinally. Ribbon crystals grew up to 5mm simultaneously through both end dies. By cooling a part of crystal, fast pulling is probably possible. Study was made on the correlation between various crystal defects of Si ribbon crystals and cell characteristics, and in particular, basic characteristics of SiC deposited particles by SEM observation to reduce their impacts. Possibility of simultaneous vertical pulling of crystals was verified by using a capillary carbon die for multi-pulling. Although crystals grew by eutectic reaction under saturated dissolution of carbon, crystals with no transition were obtained. An SiC-coated die was excellent rather than carbon one. (NEDO)

Five-year longitudinal assessment of the prognosis of apical microsurgery.

Science.gov (United States)

von Arx, Thomas; Jensen, Simon S; Hänni, Stefan; Friedman, Shimon

2012-05-01

Apical surgery is an important treatment option for teeth with post-treatment apical periodontitis. Knowledge of the long-term prognosis is necessary when weighing apical surgery against alternative treatments. This study assessed the 5-year outcome of apical surgery and its predictors in a cohort for which the 1-year outcome was previously reported. Apical microsurgery procedures were uniformly performed using SuperEBA (Staident International, Staines, UK) or mineral trioxide aggregate (MTA) (ProRoot MTA; Dentsply Tulsa Dental Specialties, Tulsa, OK) root-end fillings or alternatively Retroplast capping (Retroplast Trading, Rorvig, Denmark). Subjects examined at 1 year (n = 191) were invited for the 5-year clinical and radiographic examination. Based on blinded, independent assessment by 3 calibrated examiners, the dichotomous outcome (healed or nonhealed) was determined and associated with patient-, tooth-, and treatment-related variables using logistic regression. At the 5-year follow-up, 9 of 191 teeth were unavailable, 12 of 191 teeth were extracted, and 170 of 191 teeth were examined (87.6% recall rate). A total of 129 of 170 teeth were healed (75.9%) compared with 83.8% at 1 year, and 85.3% were asymptomatic. Two significant outcome predictors were identified: the mesial-distal bone level at ≤ 3 mm versus >3 mm from the cementoenamel junction (78.2% vs 52.9% healed, respectively; odds ratio = 5.10; confidence interval, 1.67-16.21; P apical microsurgery was 8% poorer than assessed at 1 year. It also suggested that the prognosis was significantly impacted by the interproximal bone levels at the treated tooth and by the type of root-end filling material used. Copyright © 2012 American Association of Endodontists. All rights reserved.

Immediate Implant Placement in Sockets with Asymptomatic Apical Periodontitis.

Science.gov (United States)

Crespi, Roberto; Capparé, Paolo; Crespi, Giovanni; Lo Giudice, Giuseppe; Gastaldi, Giorgio; Gherlone, Enrico

2017-02-01

The purpose of the present study was to evaluate if the presence of granulation tissue in asymptomatic apical periodontitis compromised immediate implant placement. Patients requiring extraction of one tooth (maxillary and mandibular incisive, canine or premolar) with asymptomatic apical periodontitis, were recruited for this prospective study. They were randomly scheduled into two groups: in first group (A) including 30 teeth, reactive soft tissue was debrided before implant placement, and in second group (B) including 30 teeth, reactive soft tissue was left in the apical lesion. Implants were positioned immediately after tooth extraction, and were loaded after 3 months in both groups. Cone beam computed tomography was performed before tooth extraction and at 1-year follow-up to evaluate the radiolucency around the root apex and the implant, bucco-lingual bone levels were also checked. Sixty patients were included in this study. Sixty implants were placed immediately after tooth extraction and, at 1-year follow-up, a survival rate of 100% was reported. After one year both groups showed absence of radiolucent zone at the apical region of implants. All fresh sockets presented a buccal-palatal bone reduction in both groups after one year, even if not statistically significant differences were found between baseline bone levels and within groups. Within the limitations of the present study, the immediate placement of implants into the extraction sockets with asymptomatic apical periodontitis, in presence of primary stability, did not lead to an increased rate of complications and rendered an equally favorable type of tissue integration. © 2016 Wiley Periodicals, Inc.

Galectin-3 modulates the polarized surface delivery of β1-integrin in epithelial cells.

Science.gov (United States)

Hönig, Ellena; Ringer, Karina; Dewes, Jenny; von Mach, Tobias; Kamm, Natalia; Kreitzer, Geri; Jacob, Ralf

2018-05-10

Epithelial cells require a precise intracellular transport and sorting machinery in order to establish and maintain their polarized architecture. This machinery includes beta-galactoside binding galectins for glycoprotein targeting to the apical membrane. Galectin-3 sorts cargo destined for the apical plasma membrane into vesicular carriers. After delivery of cargo to the apical milieu, galectin-3 recycles back into sorting organelles. We analyzed the role of galectin-3 in the polarized distribution of β1-integrin in MDCK cells. Integrins are located primarily at the basolateral domain of epithelial cells. We demonstrate that a minor pool of β1-integrin interacts with galectin-3 at the apical plasma membrane. Knockdown of galectin-3 decreases apical delivery of β1-integrin. This loss is restored by supplementation with recombinant galectin-3 and galectin-3 overexpression. Our data suggest that galectin-3 targets newly synthesized β1-integrin to the apical membrane and promotes apical delivery of β1-integrin internalized from the basolateral membrane. In parallel, galectin-3 knockout results in a reduction in cell proliferation and an impairment in proper cyst development. Our results suggest that galectin-3 modulates the surface distribution of β1-integrin and affects the morphogenesis of polarized cells. © 2018. Published by The Company of Biologists Ltd.

Oxidation behaviour of ribbon shape carbon fibers and their composites

International Nuclear Information System (INIS)

Manocha, L.M.; Warrier, Ashish; Manocha, S.; Edie, D.D.; Ogale, A.A.

2006-01-01

Carbon fibers, though important constituent as reinforcements for high performance carbon/carbon composites, are shadowed by their oxidation in air at temperatures beginning 450 deg. C. Owing to tailorable properties of carbon fibers, efforts are underway to explore structural modification possibilities to improve the oxidation resistance of the fibers and their composites. The pitch based ribbon shape carbon fibers are found to have highly preferential oriented graphitic structure resulting in high mechanical properties and thermal conductivity. In the present work oxidation behaviour of ribbon shape carbon fibers and their composites heat treated to 1000-2700 deg. C has been studied. SEM examination of these composites exhibits development of graphitic texture and ordering within the fibers with increase in heat treatment temperature. Oxidation studies made by thermogravimetric analysis in air show that matrix has faster rate of oxidation and in the initial stages the matrix gets oxidized at faster rate with slower rate of oxidation of the fibers depending on processing conditions of fibers and composites

Dental Apical Papilla as Therapy for Spinal Cord Injury.

Science.gov (United States)

De Berdt, P; Vanacker, J; Ucakar, B; Elens, L; Diogenes, A; Leprince, J G; Deumens, R; des Rieux, A

2015-11-01

Stem cells of the apical papilla (SCAP) represent great promise regarding treatment of neural tissue damage, such as spinal cord injury (SCI). They derive from the neural crest, express numerous neurogenic markers, and mediate neurite outgrowth and axonal targeting. The goal of the present work was to investigate for the first time their potential to promote motor recovery after SCI in a rat hemisection model when delivered in their original stem cell niche-that is, by transplantation of the human apical papilla tissue itself into the lesion. Control groups consisted of animals subjected to laminectomy only (shams) and to lesion either untreated or injected with a fibrin hydrogel with or without human SCAP. Basso-Beattie-Bresnahan locomotor scores at 1 and 3 d postsurgery confirmed early functional decline in all SCI groups. This significant impairment was reversed, as seen in CatWalk analyses, after transplantation of apical papilla into the injured spinal cord wound, whereas the other groups demonstrated persistent functional impairment. Moreover, tactile allodynia did not develop as an unwanted side effect in any of the groups, even though the SCAP hydrogel group showed higher expression of the microglial marker Iba-1, which has been frequently associated with allodynia. Notably, the apical papilla transplant group presented with reduced Iba-1 expression level. Masson trichrome and human mitochondria staining showed the preservation of the apical papilla integrity and the presence of numerous human cells, while human cells could no longer be detected in the SCAP hydrogel group at the 6-wk postsurgery time point. Altogether, our data suggest that the transplantation of a human apical papilla at the lesion site improves gait in spinally injured rats and reduces glial reactivity. It also underlines the potential interest for the application of delivering SCAP in their original niche, as compared with use of a fibrin hydrogel. © International & American

Plasma immersion ion implantation of boron for ribbon silicon solar cells

Directory of Open Access Journals (Sweden)

Derbouz K.

2013-09-01

Full Text Available In this work, we report for the first time on the solar cell fabrication on n-type silicon RST (for Ribbon on Sacrificial Template using plasma immersion ion implantation. The experiments were also carried out on FZ silicon as a reference. Boron was implanted at energies from 10 to 15 kV and doses from 1015 to 1016 cm-2, then activated by a thermal annealing in a conventional furnace at 900 and 950 °C for 30 min. The n+ region acting as a back surface field was achieved by phosphorus spin-coating. The frontside boron emitter was passivated either by applying a 10 nm deposited SiOX plasma-enhanced chemical vapor deposition (PECVD or with a 10 nm grown thermal oxide. The anti-reflection coating layer formed a 60 nm thick SiNX layer. We show that energies less than 15 kV and doses around 5 × 1015 cm-2 are appropriate to achieve open circuit voltage higher than 590 mV and efficiency around 16.7% on FZ-Si. The photovoltaic performances on ribbon silicon are so far limited by the bulk quality of the material and by the quality of the junction through the presence of silicon carbide precipitates at the surface. Nevertheless, we demonstrate that plasma immersion ion implantation is very promising for solar cell fabrication on ultrathin silicon wafers such as ribbons.

Magneto-Impedance behavior of Co-Fe-Nb-Si-B-based ribbons

Energy Technology Data Exchange (ETDEWEB)

Sarkar, Partha; Mohanta, O.; Pal, S.K.; Panda, A.K. [National Metallurgical Laboratory, Council of Scientific and Industrial Research, Jamshedpur 831007 (India); Mitra, A., E-mail: amitra@nmlindia.or [National Metallurgical Laboratory, Council of Scientific and Industrial Research, Jamshedpur 831007 (India)

2010-04-15

The giant magneto-impedance of melt spun Co{sub x}Fe{sub 72-x}Nb{sub 4}Si{sub 4}B{sub 20}(x=10, 20, 36, 50) amorphous and nanostructured ribbons have been investigated. Alloys have been optimized at the driving current amplitude, frequency and found that amorphous ribbon of nominal composition of Co{sub 36}Fe{sub 36}Nb{sub 4}Si{sub 4}B{sub 20} shown maximum GMI ratio of 13%. The behaviour of the driving current amplitude on the GMI behaviour was studied and the sample was optimized for driving current amplitude, I{sub ac}=10 mA. The frequency dependence of the GMI behaviour was studied for the ribbon sample Co{sub 36}Fe{sub 36}Nb{sub 4}Si{sub 4}B{sub 20} at frequency in the range of 100 kHz-1.2 MHz of the optimized driving current amplitude and it was found that the sample showed the maximum GMI behaviour at f=700 kHz. The optimized samples were Joule heated at the current density J=0-35 A/m{sup 2} for a period of 1 min. The GMI ratio initially increased then progressively deteriorated with J, but after a certain range it shows up to 16% of improvement in the magneto-impedance value due the increase of nanocrystalline volume fraction. The asymmetry in the GMI profile was observed for the sample Joule heated at J=1-5 A/m{sup 2} for 1 min.

Effect of annealing treatment on soft magnetic properties of Fe-6.5 wt% Si wide ribbons

International Nuclear Information System (INIS)

Roy, R.K.; Panda, A.K.; Ghosh, M.; Mitra, A.; Ghosh, R.N.

2009-01-01

The 25 mm wide ribbons of Fe-6.5 wt% Si alloy have been developed by melt spinning technique, showing sufficient ductility and white silver appearance. Two magnetic transitions take place at 676 and 760 deg. C due to the formation of B2 ordered phase and A2 disordered paramagnetic phase, respectively. The saturation magnetization of the ribbon is 17.5 kG under the applied field of 12 kG. The as-cast ribbons consist of disordered A2 structure with a low volume of B2 phases while the annealed microstructure comprises a dispersion of B2 domains in the disordered A2 matrix. The alloy shows the enhancement of the soft magnetic properties with a reduction in coercivity from 150 A/m in the as-cast state to 45 A/m in the annealed condition at 850 deg. C.

Manifold-splitting regularization, self-linking, twisting, writhing numbers of space-time ribbons

International Nuclear Information System (INIS)

Tze, C.H.

1988-01-01

The authors present an alternative formulation of Polyakov's regularization of Gauss' integral formula for a single closed Feynman path. A key element in his proof of the D = 3 fermi-bose transmutations induced by topological gauge fields, this regularization is linked here with the existence and properties of a nontrivial topological invariant for a closed space ribbon. This self-linking coefficient, an integer, is the sum of two differential characteristics of the ribbon, its twisting and writhing numbers. These invariants form the basis for a physical interpretation of our regularization. Their connection to Polyakov's spinorization is discussed. The authors further generalize their construction to the self-linking, twisting and writhing of higher dimensional d = eta(odd) submanifolds in D = (2eta + 1) space-time

A comparison of apical transportation between FlexMaster and Twisted Files rotary instruments.

Science.gov (United States)

Duran-Sindreu, Fernando; García, Marc; Olivieri, Juan Gonzalo; Mercadé, Montse; Morelló, Sergio; Roig, Miguel

2012-07-01

The aim of this study was to evaluate apical transportation in root canals after the use of Twisted Files (TF; SybronEndo, Orange, CA) and FlexMaster (VDW, Munich, Germany) #40/04 rotary files. A double-digital radiographic technique was used to compare apical transportation between the TF and FlexMaster systems. Each rotary system was used to instrument mesial canals from 80 extracted mandibular molars. The central axes of the file imaged before instrumentation (#15 K-file) and the master apical rotary file (#40/04) were superimposed digitally. AutoCAD 2008 (Autodesk Inc, San Rafael, CA) was used to measure apical transportation at 0.5 mm from the working length (WL). The data were analyzed using the Student's t test, and significance was set at P < .05. The mean amount of apical transportation at 0.5 mm from the WL was 0.17 ± 0.09 mm for the FlexMaster group and 0.19 ± 0.12 mm for the TF group. No statistically significant differences in apical transportation were found between the 2 groups. Under the conditions of the study, no statistically significant differences in apical transportation were observed between FlexMaster and TF rotary files. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

ROOT CANAL MICROORGANISMS PROFILES O F UPPER ANTERIOR TEETH WITH APICAL PERIODONTITIS

OpenAIRE

Tanumihardja, Maria; Riewpassa, Irene E; Mansjurnasir; Burhanuddin, DP

2013-01-01

Microorganisms are the main causative agents on the development of apical periodontitis. Microorganisms infecting the root canal system are colonized in communities as biofilm. These bacterial communities show distinct pattern related to the different forms of apical periodontitis which are determined by species richness and abundance. This study is aimed to examine the root canal microorganisms on upper anterior teeth of asymptomatic apical periodontitis and ch ronic api...

Effect of wheel speed and annealing temperature on microstructure and texture evolution of Ni{sub 45}Mn{sub 36.6}In{sub 13.4}Co{sub 5} ribbon

Energy Technology Data Exchange (ETDEWEB)

Feng, Yan, E-mail: yanfeng@nwpu.edu.cn [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China); Chen, Hong [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China); Gao, Li [College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306 (China); Wang, Haibo [College of Physics and Electronic Engineering, Taizhou University, Taizhou, Zhejiang 318000 (China); Bian, Xiaohai; Gong, Mingjie [State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi' an, Shaanxi 710072 (China)

2016-12-15

Ni{sub 45}Mn{sub 36.6}In{sub 13.4}Co{sub 5} magnetic shape memory alloy was successfully produced as preferentially textured ribbon by melting spinning with different wheel speed. X-ray diffraction (XRD) and electron back scatter diffraction (EBSD) were used to study structure and texture evolution of these melt-spun ribbons. The thickness of melt-spun ribbon is 42 μm, 65 μm and 30 μm depending on wheel speed of 1 0 m/s, 15 m/s and 20 m/s, respectively. Density of α fiber texture (〈100〉//ND) vary with wheel speed changes, and is most intensive in the ribbon with wheel speed of 15 m/s. Grains of the ribbons grow after being annealed at 873 K, 973 K, 1073 K and 1173 K, recrystallization was not observed in ribbons after being annealed at 873 K but occurred in ribbons after being annealed at higher temperatures. The α fiber texture becomes weaker to some extent after annealing at different temperatures, due to new recrystallization texture formed at the process of annealing. - Highlights: •Sectional part of shape memory ribbon is firstly investigated by EBSD method. •Thickness and texture of ribbons vary with wheel speed. •Annealing temperature affect texture and microstructure evolution greatly. •Recrystallization textures were observed in ribbons after being annealed.

Nonsurgical root canal therapy of large cyst-like inflammatory periapical lesions and inflammatory apical cysts.

Science.gov (United States)

Lin, Louis M; Ricucci, Domenico; Lin, Jarshen; Rosenberg, Paul A

2009-05-01

It is a general belief that large cyst-like periapical lesions and apical true cysts caused by root canal infection are less likely to heal after nonsurgical root canal therapy. Nevertheless, there is no direct evidence to support this assumption. A large cyst-like periapical lesion or an apical true cyst is formed within an area of apical periodontitis and cannot form by itself. Therefore, both large cyst-like periapical lesions and apical true cysts are of inflammatory and not of neoplastic origin. Apical periodontitis lesions, regardless of whether they are granulomas, abscesses, or cysts, fail to heal after nonsurgical root canal therapy for the same reason, intraradicular and/or extraradicular infection. If the microbial etiology of large cyst-like periapical lesions and inflammatory apical true cysts in the root canal is removed by nonsurgical root canal therapy, the lesions might regress by the mechanism of apoptosis in a manner similar to the resolution of inflammatory apical pocket cysts. To achieve satisfactory periapical wound healing, surgical removal of an apical true cyst must include elimination of root canal infection.

Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg-3Ca alloy ribbons as a biodegradable material

Energy Technology Data Exchange (ETDEWEB)

Gu, X N; Zhou, W R; Zheng, Y F [State Key Laboratory for Turbulence and Complex System and Department of Advanced Materials and Nanotechnology, College of Engineering, Peking University, Beijing 100871 (China); Li, X L [Center for Biomedical Materials and Engineering, Harbin Engineering University, Harbin 150001 (China); Cheng, Y, E-mail: yfzheng@pku.edu.c [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China)

2010-06-01

Rapidly solidified (RS) Mg-3Ca alloy ribbons were prepared by the melt-spinning technique at different wheel rotating speeds (15 m s{sup -1}, 30 m s{sup -1} and 45 m s{sup -1}) with the as-cast Mg-3Ca alloy ingot as a raw material. The RS45 Mg-3Ca alloy ribbon showed a much more fine grain size feature (approximately 200-500 nm) in comparison to the coarse grain size (50-100 {mu}m) of the original as-cast Mg-3Ca alloy ingot. The corrosion electrochemical tests in simulated body fluid indicated that the corrosion rate of the as-cast Mg-3Ca alloy was strongly reduced by the RS procedure and tended to be further decreased with increasing wheel rotating speeds (1.43 mm yr{sup -1} for RS15, 0.94 mm yr{sup -1} for RS30 and 0.36 mm yr{sup -1} for RS45). The RS Mg-3Ca alloy ribbons showed more uniform corrosion morphology compared with the as-cast Mg-3Ca alloy after polarization. The cytotoxicity evaluation revealed that the three experimental as-spun Mg-3Ca alloy ribbon extracts did not induce toxicity to the L-929 cells, whereas the as-cast Mg-3Ca alloy ingot extract did. The L-929 cells showed more improved adhesion on the surfaces of the three as-spun Mg-3Ca alloy ribbons than that of the as-cast Mg-3Ca alloy ingot.

Isotropic actomyosin dynamics promote organization of the apical cell cortex in epithelial cells.

Science.gov (United States)

Klingner, Christoph; Cherian, Anoop V; Fels, Johannes; Diesinger, Philipp M; Aufschnaiter, Roland; Maghelli, Nicola; Keil, Thomas; Beck, Gisela; Tolić-Nørrelykke, Iva M; Bathe, Mark; Wedlich-Soldner, Roland

2014-10-13

Although cortical actin plays an important role in cellular mechanics and morphogenesis, there is surprisingly little information on cortex organization at the apical surface of cells. In this paper, we characterize organization and dynamics of microvilli (MV) and a previously unappreciated actomyosin network at the apical surface of Madin-Darby canine kidney cells. In contrast to short and static MV in confluent cells, the apical surfaces of nonconfluent epithelial cells (ECs) form highly dynamic protrusions, which are often oriented along the plane of the membrane. These dynamic MV exhibit complex and spatially correlated reorganization, which is dependent on myosin II activity. Surprisingly, myosin II is organized into an extensive network of filaments spanning the entire apical membrane in nonconfluent ECs. Dynamic MV, myosin filaments, and their associated actin filaments form an interconnected, prestressed network. Interestingly, this network regulates lateral mobility of apical membrane probes such as integrins or epidermal growth factor receptors, suggesting that coordinated actomyosin dynamics contributes to apical cell membrane organization. © 2014 Klingner et al.

Bone resorptive activity in symptomatic and asymptomatic apical lesions of endodontic origin

OpenAIRE

Salinas-Muñoz, M.; Garrido-Flores, M.; Baeza, M.; Huamán-Chipana, P.; García-Sesnich, J.; Bologna, R.; Vernal, R.; Hernández, M.

2017-01-01

Objectives The aim of this study is to assess the levels and diagnostic accuracy of a set of bone resorption biomarkers, including TRAP-5, RANKL, and OPG in symptomatic and asymptomatic apical lesions and controls. Materials and methods Apical tissues from symptomatic and asymptomatic apical periodontitis patients and periodontal ligaments from healthy teeth extracted for orthodontic reasons were processed for tissue homogenization and the levels of TRAP-5, RANKL, and OPG were determined by m...

Partially and fully de-alloyed glassy ribbons based on Au: Application in methanol electro-oxidation studies

Energy Technology Data Exchange (ETDEWEB)

Paschalidou, Eirini Maria, E-mail: epaschal@unito.it [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy); Scaglione, Federico [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy); Gebert, Annett; Oswald, Steffen [Leibniz Institut für Festkörper- und Werkstoffforschung IFW, Helmholtzstraße 20, 01069, Dresden (Germany); Rizzi, Paola; Battezzati, Livio [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy)

2016-05-15

In this work, electrochemical de-alloying of an amorphous alloy, Au{sub 40}Cu{sub 28}Ag{sub 7}Pd{sub 5}Si{sub 20}, cast in ribbon form by melt spinning, has been performed, obtaining self standing nanoporous materials suitable for use as electrodes for electrocatalytic applications. The de-alloying encompasses removal of less noble elements and the crystallization of Au, resulting in interconnected ligaments whose size and morphology are described as a function of time. Depending on de-alloying time, the crystals may contain residual amounts of Cu, Ag and Pd, as shown by Auger Electron Spectroscopy (AES), Energy Dispersive Spectroscopy (EDS) and Cyclic Voltammetry (CV) in a basic solution. Current density peaks in the 0.16–0.28 V range (vs Ag/AgCl) indicate that the porous ribbons are active for the electro-oxidation of methanol. The partially de-alloyed samples, which still partially contain the amorphous phase because of the shorter etching times, have finer ligaments and display peaks at lower potential. However, the current density decreases rapidly during repeated potential scans. This is attributed to the obstruction of Au sites, mainly by the Cu oxides formed during the scans. The fully de-alloyed ribbons display current peaks at about 0.20 V and remain active for hundreds of scans at more than 60% of the initial current density. They can be fully re-activated to achieve the same performance levels after a brief immersion in nitric acid. The good activity is due to trapped Ag and Pd atoms in combination with ligament morphology. - Graphical abstract: Fine ligaments and pores made by de-alloying a glassy ribbon of a Au-based alloy, homogeneously produced across the thickness (25 μm) for studying methanol's electro-oxidation behavior. - Highlights: • Size and composition of nanoporous layers tailored in de-alloying Au-based glassy ribbons. • From amorphous precursor fine crystals occur in ligaments with residual Pd and Ag. • Fully de

Flare Ribbon Expansion and Energy Release Ayumi Asai , Takaaki ...

Indian Academy of Sciences (India)

2001-04-10

1Nobeyama Solar Radio Observatory, Minamisaku, Nagano, 384-1305, Japan. ... X2.3 solar flare which occurred on April 10, 2001. .... In the right panel of. Fig. 3, we show the temporal variation of the physical parameters, such as Bp, vf , ˙ , and S along a slit line. Here, we defined vf as the speed of the flare-ribbon ...

[A retrospective study of 180 cases of apical microsurgery].

Science.gov (United States)

Wang, Hanguo; Li, Dan; Tian, Yu; Yu, Qing

2014-07-01

To evaluate the outcome and the potential prognostic factors of apical microsurgery. The teeth with persistent periapical diseases were treated by microsurgery using micro instruments, ultrasonic retrotips and mineral trioxide aggregate (MTA) under dental operate microscope. The procedure includes incision and flap retraction, osteotomy, apicoectomy, retro- preparation and retro- filling of root canal. Patients were recalled at 1, 3, 6, and 12- month intervals. The outcome was evaluated by clinical and radiographic examinations, and the potential prognostic factors were analyzed. One hundred and eighty cases (240 teeth), including 132 upper anterior teeth, 22 lower anterior teeth, 31 upper premolars, 18 lower premolars, 19 upper molars and 18 lower molars, were treated by microsurgery between July 2010 and December 2012. A total of 152 cases (207 teeth) were recalled. The application of the apical microsurgery included failure of previous endodontic treatment, periapical lesion with post, periapical cyst, calcified canals, separated instruments, overfilling, open apex, root facture, failure of previous apical surgery, apical fenestration, and special root canal system. The success rate was 90.8% (188/207). Age, sex, tooth position, type of periapical radiolucency, fistula and clinical application type appeared to have a negative effect on the outcome. Endo-perio lesion was a significant factor. Eighteen cases (19 teeth) failed mainly because of periodontally involved lesion and vertical root fracture. Apical microsurgery, which combines the magnification and illumination provided by the microscope with the proper use of micro instruments, can treat the teeth with persistent periapical diseases precisely and less traumatically with high success rate. Case selection and standardized operations play a key role for success.

Improved magnetoimpedance and mechanical properties on nanocrystallization of amorphous Fe68.5Si18.5Cu1Nb3B9 ribbons

International Nuclear Information System (INIS)

Sahoo, Trilochan; Majumdar, B.; Srinivas, V.; Srinivas, M.; Nath, T.K.; Agarwal, G.

2013-01-01

The effect of heat-treatment temperature on evolution of microstructures, mechanical and soft magnetic properties and magnetoimpedance (MI) effect in rapidly solidified Fe 68.5 Si 18.5 Cu 1 Nb 3 B 9 ribbons, has been investigated. The as-quenched ribbons were subjected to heat-treatment at different temperatures between 400 and 600 °C for 1 h under high vacuum. Detailed structural studies on the ribbons heat-treated at and above 525 °C revealed the presence of nanocrystalline Fe 3 Si phases embedded in a residual amorphous matrix. The ribbon heat-treated at 550 °C temperature exhibits maximum ductility, maximum relative permeability of 4.8×10 4 , minimum coercivity of 0.1 Oe, and maximum MI value of 62%. The enhanced MI effect is believed to be related to the magnetic softening of 550 °C heat-treated ribbons. However, the magnetic properties and MI effect deteriorated in the samples heat-treated above 550 °C due to the coarsening of grain sizes. The soft magnetic behavior of the nanocrystalline ribbons are discussed in the light of random anisotropy model, whereas the MI effect is discussed through standard skin effect in electrodynamics. - Highlights: • Microstructure was tuned by controlled crystallization to obtain superior magnetic properties. • Improved MI in the heat-treated ribbons is attributed to the superior electromagnetic properties. • Correlation between MI and magnetic properties of nc-Fe 68.5 Si 18.5 Cu 1 Nb 3 B 9 is established. • All the observed features are consistent with the proposed random anisotropy model

THE SURFACE STRUCTURAL AND MECHANICAL PROPERTIES OF THE AMORPHOUS CO22Y54AL24 RIBBON

Directory of Open Access Journals (Sweden)

Anna Bukowska

2013-09-01

Full Text Available The aim of this study was to manufacture amorphous Co22Y54Al24 alloy in a form of thin ribbons and to investigate their properties. The investigated ribbons were prepared by rapid solidification of molten metal on a rotating copper cylinder (melt-spinning. In order to obtain the material with amorphous structure, the cooling rate of the liquid alloy should vary in a range from 104 to 106 K/s. The microstructure studies were performed using X-ray diffractometery. The mechanical properties were investigated by metallographic studies, micro-hardness and tribological resistance tests moreover the surface roughness profile were analyzed. All studies were performed for two sides of tapes, since the differences in ribbons surface, related with manufacturing process, are clearly visible. The surface from the bottom (drum side was glossy and from the top side it was shiny.

VAMP7 modulates ciliary biogenesis in kidney cells.

Directory of Open Access Journals (Sweden)

Christina M Szalinski

Full Text Available Epithelial cells elaborate specialized domains that have distinct protein and lipid compositions, including the apical and basolateral surfaces and primary cilia. Maintaining the identity of these domains is required for proper cell function, and requires the efficient and selective SNARE-mediated fusion of vesicles containing newly synthesized and recycling proteins with the proper target membrane. Multiple pathways exist to deliver newly synthesized proteins to the apical surface of kidney cells, and the post-Golgi SNAREs, or VAMPs, involved in these distinct pathways have not been identified. VAMP7 has been implicated in apical protein delivery in other cell types, and we hypothesized that this SNARE would have differential effects on the trafficking of apical proteins known to take distinct routes to the apical surface in kidney cells. VAMP7 expressed in polarized Madin Darby canine kidney cells colocalized primarily with LAMP2-positive compartments, and siRNA-mediated knockdown modulated lysosome size, consistent with the known function of VAMP7 in lysosomal delivery. Surprisingly, VAMP7 knockdown had no effect on apical delivery of numerous cargoes tested, but did decrease the length and frequency of primary cilia. Additionally, VAMP7 knockdown disrupted cystogenesis in cells grown in a three-dimensional basement membrane matrix. The effects of VAMP7 depletion on ciliogenesis and cystogenesis are not directly linked to the disruption of lysosomal function, as cilia lengths and cyst morphology were unaffected in an MDCK lysosomal storage disorder model. Together, our data suggest that VAMP7 plays an essential role in ciliogenesis and lumen formation. To our knowledge, this is the first study implicating an R-SNARE in ciliogenesis and cystogenesis.

Spontaneous coronary artery dissection associated with apical hypertrophic cardiomyopathy

International Nuclear Information System (INIS)

Tuncer, M.; Gumrukcuoglu, H.A.; Ekim, H.; Gunes, Y.; Simsek, H.

2010-01-01

Apical hypertrophic cardiomyopathy (HCM) is a relatively uncommon inherited disease. Spontaneous coronary artery dissection (SCAD) is also uncommonly observed, which often occurs in pregnant or post partum women but is rare in men. This report describes a 38 years old man with apical hypertrophic cardiomyopathy who developed SCAD leading to acute inferior myocardial infarction. After emergent appendectomy operation at another hospital, he was immediately transferred to the Cardiology Department of our hospital due to acute myocardial infarction. He emergently underwent coronary angiography which showed a long dissection involving the right coronary. He underwent an emergent CABG with cardiopulmonary bypass. Postoperative recovery was uneventful and he was discharged. According to our knowledge, no case of spontaneous coronary artery dissection associated with apical hypertrophic cardiomyopathy unrelated to postpartum period or oral contraceptive use has been reported so far. (author)

Microstructure, mechanical and functional properties of NiTi-based shape memory ribbons

International Nuclear Information System (INIS)

Mehrabi, K.; Bruncko, M.; Kneissl, A.C.

2012-01-01

Highlights: ► Melt-spun samples exhibited martensite structure and shape memory effects immediately after processing at room temperature. ► Using a new etchant and interference contrast, it is possible to reveal the fine microstructures and grain boundaries. ► The martensite structure in NiTi is very fine, and nano-sized twin boundaries could be revealed using TEM only. ► Two-way effects have been successfully introduced by different thermomechanical training methods in NiTi, NiTiCu and NiTiW alloys, which can be used for several applications, e.g. microsensors and microactuators. - Abstract: The present work has been aimed to study the microstructures, functional properties and the influence of different thermomechanical training methods on the two-way shape memory effect in NiTi-based melt-spun ribbons. In order to get small-dimensioned shape memory alloys (SMAs) with good functional and mechanical properties, a rapid solidification technique was employed. Their fracture and elasticity characteristics have been determined, as well as shape memory properties by thermomechanical cycling. The ribbons were trained under tensile and bending deformation by thermal cycling through the phase transformation temperature range. The results displayed that all different training methods were effective in developing a two-way shape memory effect (TWSME). The influence of copper (5–25 at.% Cu) and tungsten (2 at.% W) on the microstructure, and the functional and mechanical behavior of NiTi thin ribbons was also investigated. All samples show a shape memory effect immediately after processing without further heat treatment. The melt-spun ribbons were trained under constant strain (bending and tensile deformation) by thermal cycling through the phase transformation temperature range. The addition of copper was effective to narrow the transformation hysteresis. The W addition has improved the TWSME stability of the NiTi alloys and mechanical properties. Results about

Apical surgery vs apical surgery with simultaneous orthograde retreatment: A prospective cohort clinical study of teeth affected by persistent periapical lesion

Directory of Open Access Journals (Sweden)

Carlo Prati

2018-06-01

Full Text Available Aim: This prospective clinical study analyzed the 24-month outcome of conventional apical surgery retro-filled with calcium-silicate cement versus apical surgery with simultaneous orthograde retreatment by means of clinical and radiographic criteria. Materials and methods: This study included 83 teeth affected by persistent periapical lesions in 68 patients. Mean age was 52 years (median = 51 years; range 19–81 years. Twenty-eight cases were treated with apical surgery, 16 cases with apical surgery with simultaneous orthograde retreatment and 39 cases with orthograde retreatment in previously treated teeth established as control group. Periapical index score (PAI was used as radiographic criteria. Teeth were examined at 6 months, 1 and 2 years and classified as healed (without any symptoms and PAI ≤ 2, healing (without any symptoms and PAI = 3 or diseased (with symptoms or PAI ≥ 4 and not functional on the basis of radiographic and clinical criteria. At 24 months evaluation, healed and healing were considered as success and diseased and fracture as failure. Multilevel GLM model and an ordered logistic regression as statistical analysis was made with level of significance set at p < 0.05. Results: Total drop-out was 7% (n = 6. After 6–9 months, 6 teeth (3 from apical surgery, 2 from simultaneous treatment and 1 from orthograde retreatment were extracted for root fracture. Twenty-four-month success rate of apical surgery group was 78% (n = 17, apical surgery with simultaneous orthograde retreatment presented 81% (n = 10 and orthograde retreatment success was 80% (n = 24. There was no statistically difference between the groups at 24 months (p = 0.890. Conclusions: Both surgical techniques revealed a high percentage of healing, similar to that reported by previous studies. Apical surgery with simultaneous orthograde retreatment showed a faster healing after 12 months comparing to the control group. Riassunto: Scopo: In

Participation of gibberellin in the control of apical dominance in soybean and redwood

Energy Technology Data Exchange (ETDEWEB)

Ruddat, M.; Pharis, R.P.

1966-01-01

Loss of apical dominance in soybeans and redwood was increased when the plants were treated with the growth retardant AMO-1618. Simultaneous application of gibberellin reduced the number of elongating buds and promoted growth of the first or second uppermost auxillary bud, thus restoring apical dominance. It is concluded that gibberellin participates in the expression of apical dominance. 30 references, 2 tables.

Viral-bacterial associations in acute apical abscesses.

Science.gov (United States)

Ferreira, Dennis C; Rôças, Isabela N; Paiva, Simone S M; Carmo, Flávia L; Cavalcante, Fernanda S; Rosado, Alexandre S; Santos, Kátia R N; Siqueira, José F

2011-08-01

Viral-bacterial and bacterial synergism have been suggested to contribute to the pathogenesis of several human diseases. This study sought to investigate the possible associations between 9 candidate endodontic bacterial pathogens and 9 human viruses in samples from acute apical abscesses. DNA extracts from purulent exudate aspirates of 33 cases of acute apical abscess were surveyed for the presence of 9 selected bacterial species using a 16S ribosomal RNA gene-based nested polymerase chain reaction (PCR) approach. Single or nested PCR assays were used for detection of the human papillomavirus (HPV) and herpesviruses types 1 to 8. Two-thirds of the abscess samples were positive for at least one of the target viruses. Specifically, the most frequently detected viruses were HHV-8 (54.5%); HPV (9%); and varicella zoster virus (VZV), Epstein-Barr virus (EBV), and HHV-6 (6%). Bacterial DNA was present in all cases and the most prevalent bacterial species were Treponema denticola (70%), Tannerella forsythia (67%), Porphyromonas endodontalis (67%), Dialister invisus (61%), and Dialister pneumosintes (57.5%). HHV-8 was positively associated with 7 of the target bacterial species and HPV with 4, but all these associations were weak. Several bacterial pairs showed a moderate positive association. Viral coinfection was found in 6 abscess cases, but no significant viral association could be determined. Findings demonstrated that bacterial and viral DNA occurred concomitantly in two-thirds of the samples from endodontic abscesses. Although this may suggest a role for viruses in the etiology of apical abscesses, the possibility also exists that the presence of viruses in abscess samples is merely a consequence of the bacterially induced disease process. Further studies are necessary to clarify the role of these viral-bacterial interactions, if any, in the pathogenesis of acute apical abscesses. Copyright © 2011 Mosby, Inc. All rights reserved.

Megalencephaly, polymicrogyria and ribbon-like band heterotopia: A new cortical malformation.

Science.gov (United States)

Kobayashi, Yu; Magara, Shinichi; Okazaki, Kenichi; Komatsubara, Takao; Saitsu, Hirotomo; Matsumoto, Naomichi; Kato, Mitsuhiro; Tohyama, Jun

2016-11-01

Megalencephalic polymicrogyria syndromes include megalencephaly-capillary malformation and megalencephaly-polymicrogyria-polydactyly-hydrocephalus. Recent genetic studies have identified that genes in the PI3K-AKT pathway are involved in the pathogenesis of these disorders. Herein, we report a patient who presented with developmental delay, epilepsy and peculiar neuroimaging findings of megalencephaly, polymicrogyria, and symmetrical band heterotopia in the periventricular region. The heterotopias exhibited inhomogeneous signals with undulatory mixtures of gray and white matter, resembling ribbon-like heterotopia, with a predominance in the temporal to occipital regions. These neuroradiological findings were not consistent with those in known megalencephalic polymicrogyria syndromes. No genetic abnormality was identified through whole-exome sequencing. The neuroimaging findings of this patient may represent a novel cortical malformation involving megalencephaly with polymicrogyria and ribbon-like band heterotopia. Copyright © 2016 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses

International Nuclear Information System (INIS)

Jiang, W.H.; Liu, F.X.; Wang, Y.D.; Zhang, H.F.; Choo, H.; Liaw, P.K.

2006-01-01

As-cast bulk and as-spun ribbon Cu 60 Zr 30 Ti 10 metallic glasses were characterized using differential-scanning calorimetry and instrumented nanoindentation. Two alloys show a significant difference in the amount of free volume, which is attributed to the difference in a cooling rate, while exhibiting a similar serrated plastic flow. Atomic-force-microscopy observations demonstrate the pile-ups containing shear bands around the indents in both alloys. The as-cast bulk alloy has higher hardness and elastic modulus than the as-spun ribbon alloy. The difference in the strengths of two alloys may be related to the different amount of free volume. The strength seems to be more sensitive to a cooling rate during solidification than the plastic-flow behavior in the Cu 60 Zr 30 Ti 10

The discovery of 9/8-ribbons, β/γ-peptides with curved shapes governed by a combined configuration-conformation code.

Science.gov (United States)

Grison, Claire M; Robin, Sylvie; Aitken, David J

2015-11-21

The de novo design of a β/γ-peptidic foldamer motif has led to the discovery of an unprecedented 9/8-ribbon featuring an uninterrupted alternating C9/C8 hydrogen-bonding network. The ribbons adopt partially curved topologies determined synchronistically by the β-residue configuration and the γ-residue conformation sets.

Effects of Zr on microstructure and mechanical properties of Al-Cu base ribbons spun by planar flow casting

Science.gov (United States)

Lee, S. M.; Hong, C. P.

1998-04-01

The effects of the Zr addition on the solidification behavior and mechanical properties of the AI-Cu alloy ribbon have been investigated. Zr addition reduced the average grain size of the ribbon at the wheel-side surface, and promoted the microstructural transition into cellular/dendritic structure. Another noteworthy effect of Zr was the homogenization of the microstructure. The addition of Zr up to 0.5 wt.% in the /U-4.3 wt.% Cu ribbon resulted in a considerable increase in hardness at both the wheel-side and the air-side surfaces. The yield strength increased with the addition of Zr due to the grain refincment and more homogeneous distribution of ZrAI, particles. despite no noticeable improvement of the ductility.

The resection angle in apical surgery

DEFF Research Database (Denmark)

von Arx, Thomas; Janner, Simone F M; Jensen, Simon S

2016-01-01

OBJECTIVES: The primary objective of the present radiographic study was to analyse the resection angle in apical surgery and its correlation with treatment outcome, type of treated tooth, surgical depth and level of root-end filling. MATERIALS AND METHODS: In the context of a prospective clinical...... study, cone beam computed tomography (CBCT) scans were taken before and 1 year after apical surgery to measure the angle of the resection plane relative to the longitudinal axis of the root. Further, the surgical depth (distance from the buccal cortex to the most lingual/palatal point of the resection...... or with the retrofilling length. CONCLUSIONS: Statistically significant differences were observed comparing resection angles of different tooth groups. However, the angle had no significant effect on treatment outcome. CLINICAL RELEVANCE: Contrary to common belief, the resection angle in maxillary anterior teeth...

Apically-extruded debris using the ProTaper system.

Science.gov (United States)

Azar, Nasim Gheshlaghi; Ebrahimi, Gholamreza

2005-04-01

The purpose of this in vitro study was to determine the quantity of debris and irrigant extruded apically using the ProTaper system compared to ProFiles and K-Flexofiles. Thirty-six mesio-buccal root canals of human mandibular molars were selected and divided into three groups of twelve canals. Two groups were instrumented with ProFiles and ProTapers according to the manufacturer's instructions. The other group was instrumented with K-Flexofiles using the step-back technique. A standard amount of irrigant was used for each canal. Apically-extruded debris and irrigant was collected in pre-weighed vials. The mean weight of extruded debris and irrigant for each group was statistically analysed using Student's t-test and one-way ANOVA. All instrumentation techniques produced extruded debris and irrigant. Although the mean amount of extrusion with the step-back technique was higher than the two rotary systems, there was no significant difference between the three groups (p > 0.05). NiTi rotary systems were associated with less apical extrusion, but were not significantly better than hand file instrumentation. All techniques extruded debris.

Laser based thermo-conductometry as an approach to determine ribbon solid fraction off-line and in-line.

Science.gov (United States)

Wiedey, Raphael; Šibanc, Rok; Kleinebudde, Peter

2018-06-06

Ribbon solid fraction is one of the most important quality attributes during roll compaction/dry granulation. Accurate and precise determination is challenging and no in-line measurement tool has been generally accepted, yet. In this study, a new analytical tool with potential off-line as well as in-line applicability is described. It is based on the thermo-conductivity of the compacted material, which is known to depend on the solid fraction. A laser diode was used to punctually heat the ribbon and the heat propagation monitored by infrared thermography. After performing a Gaussian fit of the transverse ribbon profile, the scale parameter σ showed correlation to ribbon solid fraction in off-line as well as in-line studies. Accurate predictions of the solid fraction were possible for a relevant range of process settings. Drug stability was not affected, as could be demonstrated for the model drug nifedipine. The application of this technique was limited when using certain fillers and working at higher roll speeds. This study showed the potentials of this new technique and is a starting point for additional work that has to be done to overcome these challenges. Copyright © 2018 Elsevier B.V. All rights reserved.

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars

OpenAIRE

Abarca, J.; Zaror, C.; Monardes, H.; Hermosilla, V.; Muñoz, C.; Cantin, M.

2014-01-01

Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3–5 mm from the apex were sect...

Glassy formation ability, magnetic properties and magnetocaloric effect in Al27Cu18Er55 amorphous ribbon

Science.gov (United States)

Li, Lingwei; Xu, Chi; Yuan, Ye; Zhou, Shengqiang

2018-05-01

In this work, we have fabricated the Al27Cu18Er55 amorphous ribbon with good glassy formation ability by melt-spinning technology. A broad paramagnetic (PM) to ferromagnetic (FM) transition (second ordered) together with a large reversible magnetocaloric effect (MCE) in Al27Cu18Er55 amorphous ribbon was observed around the Curie temperature TC ∼ 11 K. Under the magnetic field change (ΔH of 0-7 T, the values of MCE parameter of the maximum magnetic entropy change (-ΔSMmax) and refrigerant capacity (RC) for Al27Cu18Er55 amorphous ribbon reach 21.4 J/kg K and 599 J/kg, respectively. The outstanding glass forming ability as well as the excellent magneto-caloric properties indicate that Al27Cu18Er55 amorphous could be a good candidate for low temperature magnetic refrigeration.

Template synthesis and characterization of nanostructured hierarchical mesoporous ribbon-like NiO as high performance electrode material for supercapacitor

International Nuclear Information System (INIS)

Yao, Mingming; Hu, Zhonghua; Xu, Zijie; Liu, Yafei; Liu, Peipei; Zhang, Qiang

2015-01-01

The ribbon-like NiO was synthesized by a hard-template method combining the calcination, using mesoporous carbon as a hard templat and guanidine hydrochloride as precipitant of weak base, respectively. The nanostructured hierarchical mesoporous ribbon-like NiO exhibits the high specific capacitance of 1260 F g −1 at the current density of 1 A g −1 , and 95% capacity retention at a current density of 10 A g −1 in a testing range of 5000 cycles. - Highlights: • Ribbon-like NiO was prepared by using mesoporous carbon as a hard template. • Typical ribbon-like NiO possesses the hierarchical mesoporous nanostructure. • High specific capacitance of 1260 F g −1 is obtained at a current density of 1 A g −1 . • Excellent electrochemical stability of 95% after 5000 charge–discharge cycles. - Abstract: In this paper, nanostructured hierarchical mesoporous ribbon-like NiO was synthesized by a hard-template method combining the calcination process. Nickel sulfate hexahydrate, guanidine hydrochloride and mesoporous carbon were used as nickel precursors, precipitant of weak base and template, respectively. The resultant NiO samples were characterized by Raman spectroscopy, energy dispersive spectrometer, X-ray diffraction, N 2 adsorption and desorption, scanning electron microscopy and transmission electron microscopy. The electrochemical performances were evaluated by cyclic voltammetry (CV), cyclic chronopotentiometry (CP) and electrochemical impedance spectroscopy (EIS) in 6 M KOH solution. The typical hierarchical mesoporous ribbon-like NiO shows a good electrochemical performance: a high specific capacitance of 1260 F g −1 at 1 A g −1 , 748 F g −1 at high current density of 20 A g −1 and 95% capacity retention at a current density of 10 A g −1 in a testing range of 5000 cycles

Random anisotropy studies in amorphous Co-Tb ribbons

International Nuclear Information System (INIS)

Hassanain, N.; Berrada, A.; Lassri, H.; Krishnan, R.

1995-01-01

Amorphous Co 1-x Tb x ribbons with x=0.45, 0.55 and 0.65 have been prepared by melt spinning technique. Magnetization measurements were carried out at 4.2 K, under magnetic fields up to 150 kOe. The Co moment is found to be very small and the Tb moment is 7.15μ B at 4.2 K, which indicates a speromagnetic spin structure. Using Chudnovsky's theory we have extracted some fundamental magnetic parameters. ((orig.))

Random anisotropy studies in amorphous CoTb ribbons

Science.gov (United States)

Hassanain, N.; Berrada, A.; Lassri, H.; Krishnan, R.

1995-02-01

Amorphous Co 1- xTb x ribbons with x = 0.45, 0.55 and 0.65 have been prepared by melt spinning technique. Magnetization measurements were carried out at 4.2 K, under magnetic fields up to 150 kOe. The Co moment is found to be very small and the Tb moment is 7.15 μB at 4.2 K, which indicates a speromagnetic spin structure. Using Chudnovsky's theory we have extracted some fundamental magnetic parameters.

Histopathological, Microbiological, and Radiographic Analysis of Antimicrobial Photodynamic Therapy for the Treatment of Teeth with Apical Periodontitis: A Study in Rats' Molars.

Science.gov (United States)

Trindade, Alessandra Cesar; de Figueiredo, José Antônio Poli; de Oliveira, Sílvia Dias; Barth Junior, Valdir Cristóvão; Gallo, Stephanie Wagner; Follmann, Carina; Wolle, Carlos Frederico Brilhante; Steier, Liviu; Morgental, Renata Dornelles; Weber, João Batista Blessmann

2017-07-01

The aim of this study was to evaluate in vivo, by histological and radiographic analysis, the response of apical tissues of rats' teeth with experimentally induced apical periodontitis, after one- and two-session endodontic treatment with and without photodynamic therapy (PDT). A microbiological analysis was also performed to verify bacterial reduction after each treatment. Studies carried out in recent years highlighted the antibacterial potential of PDT when associated with conventional endodontic therapy in vitro. Although the antimicrobial effect of PDT is well-established, tissue response to PDT in teeth with apical periodontitis lacks studies. Thirty-two rats' root canals were assigned to four groups: one session/PDT-[chemomechanical preparation (CMP)+root canal filling (RCF)]; two sessions/PDT- [CMP+calcium hydroxide (CH) for 14 days+RCF]; one session/PDT+ [CMP+PDT+RCF], and two sessions/PDT+ [CMP+PDT+CH for 14 days+RCF]. For microbiological evaluation, samples were collected before and after proposed treatments. For radiographic and histological analysis, the animals were euthanized after 28 days and the mandibles surgically removed. PDT associated with conventional endodontic therapy was able to promote significant bacterial reduction in root canals with induced apical periodontitis, but this reduction was not significantly different to conventional endodontic therapy alone. Although radiographic evaluation showed no significant differences, histological analysis showed lower scores for neutrophils/eosinophils in PDT-treated groups and macrophages/giant cells in CH groups. The use of low-level laser as light source did not promote major improvement on radiographic and histological repair, but since the number of inflammatory cells slightly decreased, it may optimize repair by modulating inflammatory process. PDT may be indicated as an adjunct to conventional endodontic therapy for teeth with apical periodontitis, in association with an interappointment

Micro‐CT analyses of apical enlargement and molar root canal complexity

DEFF Research Database (Denmark)

Markvart, M.; Darvann, Tron Andre; Larsen, P.

2012-01-01

Markvart M, Darvann TA, Larsen P, Dalstra M, Kreiborg S, Bjørndal L. Micro‐CT analyses of apical enlargement and molar root canal complexity. International Endodontic Journal, 45, 273–281, 2012. Aim To compare the effectiveness of two rotary hybrid instrumentation techniques with focus on apical...

High temperature (900-1300 C) mechanical behaviour of dendritic web grown silicon ribbons - Strain rate and temperature dependence of the yield stress

Science.gov (United States)

Mathews, V. K.; Gross, T. S.

1987-01-01

The mechanical behavior of dendritic web Si ribbons close the melting point was studied experimentally. The goal of the study was to generate data for modeling the generation of stresses and dislocation structures during growth of dendritic web Si ribbons, thereby permitting modifications to the production process, i.e., the temperature profile, to lower production costs for the photovoltaic ribbons. A laser was used to cut specimens in the direction of growth of sample ribbons, which were then subjected to tensile tests at temperatures up to 1300 C in an Ar atmosphere. The tensile strengths of the samples increased when the temperature rose above 1200 C, a phenomena which was attributed to the diffusion of oxygen atoms to the quasi-dislocation sites. The migration to the potential dislocations sites effectively locked the dislocations.

Dental Pulp Revascularization of Necrotic Permanent Teeth with Immature Apices.

Science.gov (United States)

El Ashiry, Eman A; Farsi, Najat M; Abuzeid, Sawsan T; El Ashiry, Mohamed M; Bahammam, Hammam A

The treatment of immature necrotic teeth with apical periodontitis presents challenges in endodontic and pediatric dentistry. Revascularization is a recent treatment for such cases as an alternative to conventional apexification. The purpose is to examine the effect of a pulpal revascularization procedure on immature necrotic teeth with apical periodontitis. Twenty patients were enrolled for pulp revascularization procedure by root canal disinfection using a triple antibiotic mixture for 1-2 weeks, followed by creating a blood clot, sealing the root canal orifice using white mineral trioxide aggregate and a coronal seal of composite resin. Patients were recalled periodically for up to 24 months. During follow-up, all patients were asymptomatic. Three cases of chronic apical periodontitis showed clinical disappearance of the sinus tract 2 weeks after treatment. Radiography revealed progressive periapical radiolucency resolution within the first 12 months. Within 12-24 months, the treated teeth showed progressive increases in dentinal wall thickness, root length and continued root development. Clinical and radiographic evidence showed successful revascularization treatments of immature necrotic permanent teeth with apical periodontitis. More studies are necessary to understand the underlying mechanisms and to perform histopathology of the pulp space contents after revascularization procedures.

Balance between Apical Membrane Growth and Luminal Matrix Resistance Determines Epithelial Tubule Shape

Directory of Open Access Journals (Sweden)

Bo Dong

2014-05-01

Full Text Available The morphological stability of biological tubes is crucial for the efficient circulation of fluids and gases. Failure of this stability causes irregularly shaped tubes found in multiple pathological conditions. Here, we report that Drosophila mutants of the ESCRT III component Shrub/Vps32 exhibit a strikingly elongated sinusoidal tube phenotype. This is caused by excessive apical membrane synthesis accompanied by the ectopic accumulation and overactivation of Crumbs in swollen endosomes. Furthermore, we demonstrate that the apical extracellular matrix (aECM of the tracheal tube is a viscoelastic material coupled with the apical membrane. We present a simple mechanical model in which aECM elasticity, apical membrane growth, and their interaction are three vital parameters determining the stability of biological tubes. Our findings demonstrate a mechanical role for the extracellular matrix and suggest that the interaction of the apical membrane and an elastic aECM determines the final morphology of biological tubes independent of cell shape.

Balance between apical membrane growth and luminal matrix resistance determines epithelial tubule shape.

Science.gov (United States)

Dong, Bo; Hannezo, Edouard; Hayashi, Shigeo

2014-05-22

The morphological stability of biological tubes is crucial for the efficient circulation of fluids and gases. Failure of this stability causes irregularly shaped tubes found in multiple pathological conditions. Here, we report that Drosophila mutants of the ESCRT III component Shrub/Vps32 exhibit a strikingly elongated sinusoidal tube phenotype. This is caused by excessive apical membrane synthesis accompanied by the ectopic accumulation and overactivation of Crumbs in swollen endosomes. Furthermore, we demonstrate that the apical extracellular matrix (aECM) of the tracheal tube is a viscoelastic material coupled with the apical membrane. We present a simple mechanical model in which aECM elasticity, apical membrane growth, and their interaction are three vital parameters determining the stability of biological tubes. Our findings demonstrate a mechanical role for the extracellular matrix and suggest that the interaction of the apical membrane and an elastic aECM determines the final morphology of biological tubes independent of cell shape. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Gravity-induced buds formation from protonemata apical cells in the mosses

Science.gov (United States)

Kyyak, Natalia; Khorkavtsiv, Yaroslava

The acceleration of moss protonemata development after the exit it to light from darkness is important gravidependent morphogenetic manifestation of the moss protonemata. The accelerated development of mosses shows in transformation of apical protonemata cells into the gametophores buds (Ripetskyj et al., 1999). In order to establish, that such reaction on gravitation is general property of gravisensity species, or its typical only for single moss species, experiments with the following moss species - Bryum intermedium (Ludw.) Brig., Bryum caespiticium Hedw., Bryum argenteum Hedw., Dicranodontium denudatum (Brid.) Britt. were carried out. All these species in response to influence of gravitation were capable to form rich bunches of gravitropical protonemata in darkness, that testified to their gravisensity. After the transference of Petri dishes with gravitropical protonemata from darkness on light was revealed, that in 3 of the investigated species the gametophores buds were absent. Only B. argenteum has reacted to action of gravitation by buds formation from apical cells of the gravitropical protonemata. With the purpose of strengthening of buds formation process, the experiments with action of exogenous kinetin (in concentration of 10 (-6) M) were carried out. Kinetin essentially stimulated apical buds formation of B. argenteum. The quantity of apical buds has increased almost in three times in comparison with the control. Besides, on separate stolons a few (3-4) buds from one apical cell were formed. Experimentally was established, that the gametophores buds formation in mosses is controlled by phytohormones (Bopp, 1985; Demkiv et al., 1991). In conditions of gravity influence its essentially accelerated. Probably, gravity essentially strengthened acropetal transport of phytohormones and formation of attractive center in the protonemata apical cell. Our investigations have allowed to make the conclusion, that gravi-dependent formation of the apical buds is

Surface plasmon enhanced absorption and suppressed transmission in periodic arrays of graphene ribbons

Science.gov (United States)

Nikitin, A. Yu.; Guinea, F.; Garcia-Vidal, F. J.; Martin-Moreno, L.

2012-02-01

Resonance diffraction in the periodic array of graphene microribbons is theoretically studied following a recent experiment [L. Ju , Nature Nanotech.1748-338710.1038/nnano.2011.146 6, 630 (2011)]. Systematic studies over a wide range of parameters are presented. It is shown that a much richer resonant picture would be observable for higher relaxation times of charge carriers: More resonances appear and transmission can be totally suppressed. The comparison with the absorption cross-section of a single ribbon shows that the resonant features of the periodic array are associated with leaky plasmonic modes. The longest-wavelength resonance provides the highest visibility of the transmission dip and has the strongest spectral shift and broadening with respect to the single-ribbon resonance, due to collective effects.

Thermal Conductivity of Graphene-hBN Superlattice Ribbons.

Science.gov (United States)

Felix, Isaac M; Pereira, Luiz Felipe C

2018-02-09

Superlattices are ideal model systems for the realization and understanding of coherent (wave-like) and incoherent (particle-like) phonon thermal transport. Single layer heterostructures of graphene and hexagonal boron nitride have been produced recently with sharp edges and controlled domain sizes. In this study we employ nonequilibrium molecular dynamics simulations to investigate the thermal conductivity of superlattice nanoribbons with equal-sized domains of graphene and hexagonal boron nitride. We analyze the dependence of the conductivity with the domain sizes, and with the total length of the ribbons. We determine that the thermal conductivity reaches a minimum value of 89 W m -1 K -1 for ribbons with a superlattice period of 3.43 nm. The effective phonon mean free path is also determined and shows a minimum value of 32 nm for the same superlattice period. Our results also reveal that a crossover from coherent to incoherent phonon transport is present at room temperature for BNC nanoribbons, as the superlattice period becomes comparable to the phonon coherence length. Analyzing phonon populations relative to the smallest superlattice period, we attribute the minimum thermal conductivity to a reduction in the population of flexural phonons when the superlattice period equals 3.43 nm. The ability to manipulate thermal conductivity using superlattice-based two-dimensional materials, such as graphene-hBN nanoribbons, opens up opportunities for application in future nanostructured thermoelectric devices.

Student Evaluation of the Yellow Ribbon Suicide Prevention Program in Midwest Schools

Science.gov (United States)

Flynn, Alexandra; Zackula, Rosalee; Klaus, Nicole M.; McGinness, Liz; Carr, Susan; Macaluso, Matthew

2016-01-01

Objective Yellow Ribbon is a gatekeeper-type suicide prevention program that is widely used in public schools. However, data on its effectiveness are limited. The purpose of our study was to evaluate self-reported changes in knowledge and comfort level communicating about suicide following Yellow Ribbon training for a large, representative sample of students from a public school system in the midwestern United States. Methods The program was administered to students within the same school district during 2006 through 2009. A pre-post survey using a 4-point Likert scale was administered to rate students’ knowledge of risk factors and available resources, comfort level communicating about suicide, estimate of friends at risk for suicide, and behavioral intent toward help-seeking. Results Aggregate responses from 3,257 students, aged 11 to 18 years, were collected by the schools; 51% were female, 33% were Hispanic, and 30% were white. Suicide-related knowledge of risk factors, where to go for help, and resources, along with comfort level in asking for help, all significantly improved following program participation (Cramer’s V = 0.243 to 0.376, P suicide prevention program appears to be beneficial for students in the midwestern United States. We observed significant improvement in knowledge, comfort level, and behavioral intent for help-seeking if suicidal thoughts occur. Findings also suggested that Yellow Ribbon training administered during middle school may be especially helpful for males. PMID:27733952

Hypertrophic cardiomyopathy with mid-ventricular obstruction and apical aneurysm

Directory of Open Access Journals (Sweden)

N.D. Oryshchyn

2016-11-01

Full Text Available A case report of apical left ventricular aneurysm in patient with hypertrophic cardiomyopathy with mid-ventricular obstruction (diagnosis and surgical treatment is presented. We revealed apical aneurysm and mid-ventricular obstruction during echocardiography and specified anatomical characteristics of aneurysm during computer tomography. There was no evidence of obstructive coronary artery disease during coronary angiography. Taking into consideration multiple cerebral infarcts, aneurysm resection and left ventricular plastics was performed. Electronic microscopy of myocardium confirmed the diagnosis of hypertrophic cardiomyopathy.

Flat-plate solar array project. Volume 3: Silicon sheet: Wafers and ribbons

Science.gov (United States)

Briglio, A.; Dumas, K.; Leipold, M.; Morrison, A.

1986-01-01

The primary objective of the Silicon Sheet Task of the Flat-Plate Solar Array (FSA) Project was the development of one or more low cost technologies for producing silicon sheet suitable for processing into cost-competitive solar cells. Silicon sheet refers to high purity crystalline silicon of size and thickness for fabrication into solar cells. Areas covered in the project were ingot growth and casting, wafering, ribbon growth, and other sheet technologies. The task made and fostered significant improvements in silicon sheet including processing of both ingot and ribbon technologies. An additional important outcome was the vastly improved understanding of the characteristics associated with high quality sheet, and the control of the parameters required for higher efficiency solar cells. Although significant sheet cost reductions were made, the technology advancements required to meet the task cost goals were not achieved.

Assessment of Root Morphology and Apices of First and Second Maxillary Molars in Tehran Population

Directory of Open Access Journals (Sweden)

Mandana Naseri

2015-12-01

Full Text Available Introduction: Objective: This study aimed to assess the possible variations in root canal anatomy and topography of the apices of first and second maxillary molars. Materials and methods: A total of 67 first and second maxillary permanent molars were collected. Access cavity was prepared and 2% methylene blue was injected. The teeth were demineralized by 5% nitric acid and cleared with methyl salicylate. Specimens were evaluated under stereomicroscopy and analyzed using the sample t-test. Results: Based on Vertucci’s classification, the mesiobuccal root of maxillary first molars was type I in 87.5% and type IV in 12.5% of the cases. The mesiobuccal root of second maxillary molars was type I in 60%, type II in 8.6%, type IV in 25.7% and type V in 5.7% of cases. In maxillary first and second molars, the distobuccal and palatal roots were type I in 100% of the cases. The distance of the apical constriction from the apical foramen was 0.21±0.09 mm, the distance from the apical constriction tothe anatomic apex was 0.44±0.19 mm and the distance of the apical foramen from the anatomic apex was 0.15±0.15 mm. The mean percentage of delta prevalence was 3.2% in both teeth. Conclusion: The mean distance of the apical foramen and apical constriction from the anatomic apex was less than 0.6 and 1.2 mm, respectively. In maxillary first and second molars, the mean distance of the apical constriction from the apical foramen and anatomic apex was 0.21 and 0.44, respectively and the mean distance of the apical foramen from the anatomic apex was 0.15 mm

A Quantitative Analysis of Photovoltaic Modules Using Halved Cells

Directory of Open Access Journals (Sweden)

S. Guo

2013-01-01

Full Text Available In a silicon wafer-based photovoltaic (PV module, significant power is lost due to current transport through the ribbons interconnecting neighbour cells. Using halved cells in PV modules is an effective method to reduce the resistive power loss which has already been applied by some major PV manufacturers (Mitsubishi, BP Solar in their commercial available PV modules. As a consequence, quantitative analysis of PV modules using halved cells is needed. In this paper we investigate theoretically and experimentally the difference between modules made with halved and full-size solar cells. Theoretically, we find an improvement in fill factor of 1.8% absolute and output power of 90 mW for the halved cell minimodule. Experimentally, we find an improvement in fill factor of 1.3% absolute and output power of 60 mW for the halved cell module. Also, we investigate theoretically how this effect confers to the case of large-size modules. It is found that the performance increment of halved cell PV modules is even higher for high-efficiency solar cells. After that, the resistive loss of large-size modules with different interconnection schemes is analysed. Finally, factors influencing the performance and cost of industrial halved cell PV modules are discussed.

Deep-apical tubules: dynamic lipid-raft microdomains in the brush-border region of enterocytes

DEFF Research Database (Denmark)

Hansen, Gert H; Pedersen, Jens; Niels-Christiansen, Lise-Lotte

2003-01-01

microdomains. Deep-apical tubules were positioned close to the actin rootlets of adjacent microvilli in the terminal web region, which had a diameter of 50-100 nm, and penetrated up to 1 microm into the cytoplasm. Markers for transcytosis, IgA and the polymeric immunoglobulin receptor, as well as the resident...... lipid raft-containing compartments, but little is otherwise known about these raft microdomains. We therefore studied in closer detail apical lipid-raft compartments in enterocytes by immunogold electron microscopy and biochemical analyses. Novel membrane structures, deep-apical tubules, were visualized...... brush-border enzyme aminopeptidase N, were present in these deep-apical tubules. We propose that deep-apical tubules are a specialized lipid-raft microdomain in the brush-border region functioning as a hub in membrane trafficking at the brush border. In addition, the sensitivity to cholesterol depletion...

Development of variable-width ribbon heating elements for liquid-metal and gas-cooled fast breeder reactor fuel-pin simulators

International Nuclear Information System (INIS)

McCulloch, R.W.; Post, D.W.; Lovell, R.T.; Snyder, S.D.

1981-04-01

Variable-width ribbon heating elements that provide a chopped-cosine variable heat flux profile have been fabricated for fuel pin simulators used in test loops by the Breeder Reactor Program Thermal-Hydraulic Out-of-Reactor Safety test facility and the Gas-Cooled Fast Breeder Reactor-Core Flow Test Loop. Thermal, mechanical, and electrical design considerations are used to derive an analytical expression that precisely describes ribbon contour in terms of the major fabrication parameters. These parameters are used to generate numerical control tapes that control ribbon cutting and winding machines. Infrared scanning techniques are developed to determine the optimum transient thermal profile of the coils and relate this profile to that generated by the coils in completed fuel pin simulators

Aminopeptidase N is directly sorted to the apical domain in MDCK cells

DEFF Research Database (Denmark)

Wessels, H P; Hansen, Gert Helge; Fuhrer, C

1990-01-01

In different epithelial cell types, integral membrane proteins appear to follow different sorting pathways to the apical surface. In hepatocytes, several apical proteins were shown to be transported there indirectly via the basolateral membrane, whereas in MDCK cells a direct sorting pathway from...

A TWO-RIBBON WHITE-LIGHT FLARE ASSOCIATED WITH A FAILED SOLAR ERUPTION OBSERVED BY ONSET, SDO, AND IRIS

International Nuclear Information System (INIS)

Cheng, X.; Hao, Q.; Ding, M. D.; Chen, P. F.; Fang, C.; Liu, K.; Liu, Y. D.

2015-01-01

Two-ribbon brightenings are one of the most remarkable characteristics of an eruptive solar flare and are often used to predict the occurrence of coronal mass ejections (CMEs). Nevertheless, it was recently called into question whether all two-ribbon flares are eruptive. In this paper, we investigate a two-ribbon-like white-light (WL) flare that is associated with a failed magnetic flux rope (MFR) eruption on 2015 January 13, which has no accompanying CME in the WL coronagraph. Observations by the Optical and Near-infrared Solar Eruption Tracer and the Solar Dynamics Observatory reveal that with the increase of the flare emission and the acceleration of the unsuccessfully erupting MFR, two isolated kernels appear at the WL 3600 Å passband and quickly develop into two elongated ribbon-like structures. The evolution of the WL continuum enhancement is completely coincident in time with the variation of Fermi hard X-ray 26–50 keV flux. An increase of continuum emission is also clearly visible at the whole FUV and NUV passbands observed by the Interface Region Imaging Spectrograph. Moreover, in one WL kernel, the Si iv, C ii, and Mg ii h/k lines display significant enhancement and non-thermal broadening. However, their Doppler velocity pattern is location-dependent. At the strongly bright pixels, these lines exhibit a blueshift, while at moderately bright ones, the lines are generally redshifted. These results show that the failed MFR eruption is also able to produce a two-ribbon flare and high-energy electrons that heat the lower atmosphere, causing the enhancement of the WL and FUV/NUV continuum emissions and chromospheric evaporation

Generation of second harmonic in off-diagonal magneto-impedance in Co-based amorphous ribbons

International Nuclear Information System (INIS)

Buznikov, N A; Yoon, S S; Jin, L; Kim, C O; Kim, C G

2006-01-01

The off-diagonal magneto-impedance in Co-based amorphous ribbons was measured using a pick-up coil wound around the sample. The ribbons were annealed in air or in vacuum in the presence of a weak magnetic field. The evolution of the first and second harmonics in the pick-up coil voltage as a function of the current amplitude was studied. At low current amplitudes, the first harmonic dominates in the frequency spectrum of the voltage, and at sufficiently high current amplitudes, the amplitude of the second harmonic becomes higher than that of the first harmonic. For air-annealed ribbons, the asymmetric two-peak behaviour of the field dependences of the harmonic amplitudes was observed, which is related to the coupling between the amorphous phase and surface crystalline layers appearing after annealing. For vacuum-annealed samples, the first harmonic has a maximum at zero external field, and the field dependence of the second harmonic exhibits symmetric two-peak behaviour. The experimental results are interpreted in terms of a quasi-static rotational model. It is shown that the appearance of the second harmonic in the pick-up coil voltage is related to the anti-symmetrical distribution of the transverse field induced by the current. The calculated dependences are in qualitative agreement with the experimental data

Mössbauer and Kerr microscopy investigation of crystallization in FeCoB ribbons

Energy Technology Data Exchange (ETDEWEB)

Reddy, V. Raghavendra, E-mail: varimalla@yahoo.com, E-mail: vrreddy@csr.res.in; Hussain, Zaineb; Babu, Hari [UGC DAE Consortium for Scientific Research, University Campus, Kandhwa Road, Indore-452001 India (India); Shrivastava, Namrata [School of Physics, DAVV, Khandwa Road, Indore – 452001 India (India); Gupta, Ajay [Amity Centre for Spintronic Materials, Amity University, Noida 201303.India (India)

2016-05-23

The present work reports the crystallization study of amorphous FeCoB ribbons using x-ray diffraction, {sup 57}Fe Mössbauer spectroscopy in transmission mode and magneto-optical Kerr (MOKE) microscopy. Annealing at 673 K is found to result in crystallization. From the Mossbauer measurements it is observed that the Fe magnetic moments are in the plane of sample for as-cast ribbon; α-FeCo, (Fe{sub 0.5}Co{sub 0.5}){sub 2}B and Fe{sub 2}B phases are formed after crystallization. MOKE microscopy revealed that wide 180° domain walls & narrow fingerprint domains are observed before crystallization and fine domains are observed after crystallization. The results are explained in terms of the presence of internal stresses and their annealing with thermal heat treatment.

Prognostic factors in apical surgery with root-end filling: a meta-analysis

DEFF Research Database (Denmark)

von Arx, Thomas; Peñarrocha, Miguel; Jensen, Simon Storgård

2010-01-01

Apical surgery has seen continuous development with regard to equipment and surgical technique. However, there is still a shortage of evidence-based information regarding healing determinants. The objective of this meta-analysis was to review clinical articles on apical surgery with root-end fill...

Ribbon scanning confocal for high-speed high-resolution volume imaging of brain.

Directory of Open Access Journals (Sweden)

Alan M Watson

Full Text Available Whole-brain imaging is becoming a fundamental means of experimental insight; however, achieving subcellular resolution imagery in a reasonable time window has not been possible. We describe the first application of multicolor ribbon scanning confocal methods to collect high-resolution volume images of chemically cleared brains. We demonstrate that ribbon scanning collects images over ten times faster than conventional high speed confocal systems but with equivalent spectral and spatial resolution. Further, using this technology, we reconstruct large volumes of mouse brain infected with encephalitic alphaviruses and demonstrate that regions of the brain with abundant viral replication were inaccessible to vascular perfusion. This reveals that the destruction or collapse of large regions of brain micro vasculature may contribute to the severe disease caused by Venezuelan equine encephalitis virus. Visualization of this fundamental impact of infection would not be possible without sampling at subcellular resolution within large brain volumes.

Intraoperative cervix location and apical support stiffness in women with and without pelvic organ prolapse.

Science.gov (United States)

Swenson, Carolyn W; Smith, Tovia M; Luo, Jiajia; Kolenic, Giselle E; Ashton-Miller, James A; DeLancey, John O

2017-02-01

It is unknown how initial cervix location and cervical support resistance to traction, which we term "apical support stiffness," compare in women with different patterns of pelvic organ support. Defining a normal range of apical support stiffness is important to better understand the pathophysiology of apical support loss. The aims of our study were to determine whether: (1) women with normal apical support on clinic Pelvic Organ Prolapse Quantification, but with vaginal wall prolapse (cystocele and/or rectocele), have the same intraoperative cervix location and apical support stiffness as women with normal pelvic support; and (2) all women with apical prolapse have abnormal intraoperative cervix location and apical support stiffness. A third objective was to identify clinical and biomechanical factors independently associated with clinic Pelvic Organ Prolapse Quantification point C. We conducted an observational study of women with a full spectrum of pelvic organ support scheduled to undergo gynecologic surgery. All women underwent a preoperative clinic examination, including Pelvic Organ Prolapse Quantification. Cervix starting location and the resistance (stiffness) of its supports to being moved steadily in the direction of a traction force that increased from 0-18 N was measured intraoperatively using a computer-controlled servoactuator device. Women were divided into 3 groups for analysis according to their pelvic support as classified using the clinic Pelvic Organ Prolapse Quantification: (1) "normal/normal" was women with normal apical (C -5 cm and Ba and/or Bp ≥ 0 cm). Demographics, intraoperative cervix locations, and apical support stiffness values were then compared. Normal range of cervix location during clinic examination and operative testing was defined by the total range of values observed in the normal/normal group. The proportion of women in each group with cervix locations within and outside the normal range was determined. Linear regression

Exchange bias behavior in Ni{sub 50.0}Mn{sub 35.5} In{sub 14.5} ribbons annealed at different temperatures

Energy Technology Data Exchange (ETDEWEB)

Sanchez, T. [Dept. de Fisica, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo (Spain); Sato Turtelli, R.; Groessinger, R. [Institut fur Festkoerperphysik, Technische Universitaet Wien, Wiedner Hauptstr. 8-10, 1040 Vienna (Austria); Sanchez, M.L.; Santos, J.D.; Rosa, W.O.; Prida, V.M. [Dept. de Fisica, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo (Spain); Escoda, Ll.; Sunol, J.J. [Campus de Montilivi, Universidad de Girona, edifici PII, Lluis Santalo s/n. 17003 Girona (Spain); Koledov, V. [Kotelnikov Institute of Radio Engineering and Electronics, RAS, Moscow 125009 (Russian Federation); Hernando, B., E-mail: grande@uniovi.es [Dept. de Fisica, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo (Spain)

2012-10-15

Heusler alloy Ni{sub 50.0}Mn{sub 35.5}In{sub 14.5} ribbons were prepared by melt-spinning technique. Several short time annealings were carried out in order to enhance the exchange bias effect in this alloy ribbon. The magnetic transition temperature increases with the annealing, compared to the as-spun sample, however no significant differences in respective Curie temperatures were observed for austenite and martensite phases in such annealed samples. Exchange bias effect is observed at low temperatures for all samples and practically vanishes at 60 K for the as-spun sample, whereas for the annealed ribbons it vanishes at 100 K.

The apical complex provides a regulated gateway for secretion of invasion factors in Toxoplasma.

Directory of Open Access Journals (Sweden)

Nicholas J Katris

2014-04-01

Full Text Available The apical complex is the definitive cell structure of phylum Apicomplexa, and is the focus of the events of host cell penetration and the establishment of intracellular parasitism. Despite the importance of this structure, its molecular composition is relatively poorly known and few studies have experimentally tested its functions. We have characterized a novel Toxoplasma gondii protein, RNG2, that is located at the apical polar ring--the common structural element of apical complexes. During cell division, RNG2 is first recruited to centrosomes immediately after their duplication, confirming that assembly of the new apical complex commences as one of the earliest events of cell replication. RNG2 subsequently forms a ring, with the carboxy- and amino-termini anchored to the apical polar ring and mobile conoid, respectively, linking these two structures. Super-resolution microscopy resolves these two termini, and reveals that RNG2 orientation flips during invasion when the conoid is extruded. Inducible knockdown of RNG2 strongly inhibits host cell invasion. Consistent with this, secretion of micronemes is prevented in the absence of RNG2. This block, however, can be fully or partially overcome by exogenous stimulation of calcium or cGMP signaling pathways, respectively, implicating the apical complex directly in these signaling events. RNG2 demonstrates for the first time a role for the apical complex in controlling secretion of invasion factors in this important group of parasites.

Evaluation and Comparison of the Position of the Apical Constriction in Single-root and Multiple-root Teeth

Directory of Open Access Journals (Sweden)

Alireza Farhad

2017-12-01

Full Text Available Introduction: Precise knowledge of the location of the apical constriction is essential to root canal treatment and long-term prognosis. Considering the differences in the apical constriction and size of the roots in single- and multiple-root teeth in various races, examination and comparison of the location of the apical constriction in single-root and multiple-root teeth are of paramount importance. The present studies aimed to measure and compare the distance of the apical constriction from the apical foramen and anatomical apex in single-root and multiple-root teeth. Materials and Methods: In this cross-sectional study, 60 roots of single-rooted teeth and 60 roots of multiple-rooted teeth were collected from the patients referring to the health centers in Isfahan, Iran. After cleansing and disinfecting the surface of the roots, the surface of the teeth was washed with hypochlorite. Based on the direction of the apical foramen, a longitudinal cut was made in the same direction, and the roots were examined microscopically at the magnification of 25. Following that, the distance of the apical constriction from the apical foramen and anatomical apex was measured using a digital camera. In addition, mean and standard deviation of the obtained distance values were determined. Distances in the single-root and multiple-root teeth were compared using independent t-test, at the significance level of Results: Mean distance between the apical constriction and apical foramen was 0.86±0.33 mm in the single-root teeth and 0.072±0.27 mm in the multiple-root teeth. Mean distance between the apical constriction and anatomical apex was 1.14±0.36 mm in the single-root teeth and 1.03±0.36 mm in the multiple-root teeth. Moreover, the results of independent t-test showed the distance of the apical constriction from the apical foramen to be significant between single-root and multiple-rooted teeth (P=0.013. However, the distance between the apical constriction

3D Anisotropy of Solar Wind Turbulence, Tubes, or Ribbons?

Science.gov (United States)

Verdini, Andrea; Grappin, Roland; Alexandrova, Olga; Lion, Sonny

2018-01-01

We study the anisotropy with respect to the local magnetic field of turbulent magnetic fluctuations at magnetofluid scales in the solar wind. Previous measurements in the fast solar wind obtained axisymmetric anisotropy, despite that the analysis method allows nonaxisymmetric structures. These results are probably contaminated by the wind expansion that introduces another symmetry axis, namely, the radial direction, as indicated by recent numerical simulations. These simulations also show that while the expansion is strong, the principal fluctuations are in the plane perpendicular to the radial direction. Using this property, we separate 11 yr of Wind spacecraft data into two subsets characterized by strong and weak expansion and determine the corresponding turbulence anisotropy. Under strong expansion, the small-scale anisotropy is consistent with the Goldreich & Sridhar critical balance. As in previous works, when the radial symmetry axis is not eliminated, the turbulent structures are field-aligned tubes. Under weak expansion, we find 3D anisotropy predicted by the Boldyrev model, that is, turbulent structures are ribbons and not tubes. However, the very basis of the Boldyrev phenomenology, namely, a cross-helicity increasing at small scales, is not observed in the solar wind: the origin of the ribbon formation is unknown.

First-order reversal curve analysis in the hysteretic behavior of boron-rich nanocomposite Nd-Fe-B ribbons

International Nuclear Information System (INIS)

Saccone, F.D.; Pampillo, L.G.; Oliva, M.I.; Bercoff, P.G.; Bertorello, H.R.; Sirkin, H.R.M.

2007-01-01

Structural and magnetic properties of melt-spun Nd 4.5 Fe 72 Co 3 Cr 2 Al 1 B 17.5 ribbons were studied by means of differential scanning calorimetry, Moessbauer effect spectroscopy, X-ray diffraction and first-order reversal curve distributions. The presence of a solid solution (Fe, Co) in ribbons annealed at 685 C for 10 min was detected from Moessbauer spectra. Correlations between the observed structural changes at higher annealing temperatures and modifications in the interaction fields of precipitated phases are discussed

Left ventricular apical ballooning syndrome

International Nuclear Information System (INIS)

Rahman, N.; Tai, J.; Soofi, A.

2007-01-01

The transient left ventricular apical ballooning syndrome, also known as Takotsubo cardiomyopathy, is characterized by transient left ventricular dysfunction in the absence of obstructive epicardial coronary disease. Although the syndrome has been reported in Japan since 1990, it is rare in other regions. Rapid recognition of the syndrome can modify the diagnostic and therapeutic attitude i.e. avoiding thrombolysis and performing catheterization in the acute phase. (author)

Morfologia e biometria do ligamento apical do pênis de touros da raça Girolando Morphology and biometry of the apical ligament of the penis of Girolando race bulls

Directory of Open Access Journals (Sweden)

Júlio Roquete Cardoso

2010-08-01

Full Text Available Objetivou-se descrever a morfologia e biometria do ligamento apical do pênis de 32 touros da raça Girolando (Bos taurus indicus X Bos taurus taurus, Linnaeus - 1758, com idade de 36 a 48 meses e pesando de 480 a 540kg. As peças anatômicas foram obtidas em frigorífico e mantidas congeladas até dissecação. O ligamento originou-se a 15,1±2,9cm distalmente à curvatura caudal da flexura sigmoide e inseriu-se a 1,4±0,7cm proximalmente ao colo da glande, medindo 18,9±2,6cm de comprimento. Apresentou largura de 1,9±0,6mm na sua origem, 2,2±0,8mm na inserção e 35,2±10mm na altura da inserção da lâmina interna do prepúcio. A espessura média ao longo de sua extensão variou de 0,7 a 1,9mm. Próximo à coroa da glande, o ligamento apical se posiciona principalmente na superfície dorsolateral esquerda desse órgão, e a característica da sua fixação na albugínea apresentou variações ao longo de sua extensão. Em sua origem e inserção e na face esquerda do pênis, o ligamento apical é firmemente aderido à túnica albugínea, mas na face dorsal e direita do pênis essa união é realizada por meio de tecido conjuntivo frouxo. Verificou-se correlação média entre o comprimento e a circunferência do pênis com o comprimento do ligamento apical, mas a correlação entre essas variáveis do pênis e a largura do ligamento apical foi baixa.The aim of this study was to describe the morphology and biometry of the apical ligament of the penis of Girolando bulls. For this purpose, it was dissected 32 penis of Girolando bulls obtained from slaughterhouses and kept frozen until their dissection. The animals were 36 to 48 month old and weighted between 480 and 540kg. The origin of the apical ligament occurred at 15.1±2.9cm distally to the caudal loop of the sigmoid flexure and its insertion occurred at 1.4±0.7cm proximally to the neck of the glans. The length of the apical ligament was 19.9±2.6cm. The width was 1.9±0.6mm at its

[Clinical characteristics and speech therapy of lingua-apical articulation disorder].

Science.gov (United States)

Zhang, Feng-hua; Jin, Xing-ming; Zhang, Yi-wen; Wu, Hong; Jiang, Fan; Shen, Xiao-ming

2006-03-01

To explore the clinical characteristics and speech therapy of 62 children with lingua-apical articulation disorder. Peabody Picture Vocabulary Test (PPVT), Gesell development scales (Gesell), Wechsler Intelligence Scale for Preschool Children (WPPSI) and speech test were performed for 62 children at the ages of 3 to 8 years with lingua-apical articulation disorder. PPVT was used to measure receptive vocabulary skills. GESELL and WPPSI were utilized to represent cognitive and non-verbal ability. The speech test was adopted to assess the speech development. The children received speech therapy and auxiliary oral-motor functional training once or twice a week. Firstly the target sound was identified according to the speech development milestone, then the method of speech localization was used to clarify the correct articulation placement and manner. It was needed to change food character and administer oral-motor functional training for children with oral motor dysfunction. The 62 cases with the apical articulation disorder were classified into four groups. The combined pattern of the articulation disorder was the most common (40 cases, 64.5%), the next was apico-dental disorder (15 cases, 24.2%). The third was palatal disorder (4 cases, 6.5%) and the last one was the linguo-alveolar disorder (3 cases, 4.8%). The substitution errors of velar were the most common (95.2%), the next was omission errors (30.6%) and the last was absence of aspiration (12.9%). Oral motor dysfunction was found in some children with problems such as disordered joint movement of tongue and head, unstable jaw, weak tongue strength and poor coordination of tongue movement. Some children had feeding problems such as preference of eating soft food, keeping food in mouths, eating slowly, and poor chewing. After 5 to 18 times of therapy, the effective rate of speech therapy reached 82.3%. The lingua-apical articulation disorders can be classified into four groups. The combined pattern of the

A lesão apical em cardiopatas chagásicos crônicos: estudo necroscópico Apical lesions in Chagas' heart disease patients: an autopsy study

Directory of Open Access Journals (Sweden)

Cristina Brandt Friedrich Martin Gurgel

2010-12-01

Full Text Available INTRODUÇÃO: A lesão apical ventricular é típica da cardiopatia chagásica e sua presença representa risco de fenômenos tromboembólicos. O objetivo deste trabalho é avaliar a frequência de LA à necropsia de portadores de cardiopatia chagásica crônica. MÉTODOS: Análise retrospectiva de necropsias de chagásicos maiores que 17 anos. Efetuada análise estatística comparativa das variáveis clínicas e dos achados necroscópicos entre o grupo A (com lesão apical e o grupo B (ausência de lesão apical. RESULTADOS: Estudados 51 casos: 25 no grupo A (idade média de 53 anos, 64% do sexo masculinoe 26 no B.. A LA localizava-se no ventrículo esquerdo em 80% casos. No grupo B, a média de idade foi de 56 anos e 46,1% eram do sexo masculino. A forma clínica prevalente nos dois grupos foi a miopática, mas arritmia cardíaca também esteve presente em ambos (57,9% no grupo A e 32,1% no B. Foi constatada a presença de trombos em 60% dos casos do grupo A (53,3% localizados na LA e 30,7% no B; CONCLUSÕES: Houve predomínio da forma miopática nos casos com LA, com média de peso cardíaco maior em relação ao B. Em ambos os grupos observamos relação diretamente proporcional entre maior peso cardíaco e presença de tromboses. Houve predomínio do número de tromboses no grupo A, mais de 50% eram localizadas na lesão, cujo diferencial clínico principal consistiu na presença maior de arritmias. A miopatia (com aumento de peso acima de 500g foi primordial para aparecimento de tromboses.INTRODUCTION: The presence of an apical ventricular lesion increases the risk of intracardiac thrombosis and thromboembolic phenomena. The study evaluated the incidence of apical lesions and intracardiac thrombosis in Chagas' heart disease patients at autopsy. METHODS: A retrospective review of autopsies of Chagas' heart disease patients was conducted. Statistical analysis included comparison of clinical variables and autopsy findings between two groups

Numerical Study of the influence of a ribbon geometry of experiment on measuring particle angular distributions

International Nuclear Information System (INIS)

Artemov, A.S.

1996-01-01

The values and nature of systematic errors in small-angle particle scattering experiments using ribbon-like beams are investigated by numerical simulation. As shown, the extent of the influence of a ribbon geometry of experiment on the result of measurement is significantly dependent on the shape of the measured angular distribution in an elementary act of interaction. The algorithm of experimental material treatment, obtained in measuring the widths at half maximum of the angular differential cross sections of secondary particles, is presented using an example of specific distributions and certain experimental setup. (author). 12 refs., 7 figs

The mechanics of Ribbons and Möbius bands

CERN Document Server

Fried, Eliot

2016-01-01

Recent developments in biology and nanotechnology have stimulated a rapidly growing interest in the mechanics of thin, flexible ribbons and Mobius bands. This edited volume contains English translations of four seminal papers on this topic, all originally written in German; of these, Michael A. Sadowsky published the first in 1929, followed by two others in 1930, and Walter Wunderlich published the last in 1962. The volume also contains invited, peer-reviewed, original research articles on related topics. Previously published in the Journal of Elasticity, Volume 119, Issue 1-2, 2015.

Magnetoband structures of AB-stacked zigzag nanographite ribbons

Energy Technology Data Exchange (ETDEWEB)

Chang, C.P.; Chiu, C.W.; Shyu, F.L.; Chen, R.B.; Lin, M.F

2002-12-30

Magnetoband structures of AB-stacked zigzag nanographite ribbons are studied by the tight-binding model. The magnetic field changes band width, energy space, and energy dispersions (the produce of Landau subbands and Landau levels). It causes many zero energy points. Such points and corresponding localized states are studied in detail. There are certain important differences between localized states and edge states. Oscillation period of Landau subbands are determined by these points. The interribbon interactions also affect magnetoband structures, such as energy dispersions, band width, oscillation period of Landau subbands, and flux dependence of Hofstadter butterflies.

Assessment of apical periodontitis by MRI. A feasibility study

Energy Technology Data Exchange (ETDEWEB)

Geibel, M.A. [Ulm Univ. (Germany). Oral and Maxillofacial Surgery; Schreiber, E.S.; Bracher, A.K.; Rasche, V. [Ulm Univ. (Germany). Internal Medicine II; Hell, E.; Ulrici, J. [Sirona Dental Systems GmbH, Bensheim (Germany). Dental Imaging; Sailer, L.K. [DOC Praxisklinik im Wiley, Neu-Ulm (Germany). MKG; Ozpeynirci, Y. [Ulm Univ. (Germany). Diagnostic and Interventional Radiology

2015-04-15

The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

Assessment of apical periodontitis by MRI. A feasibility study

International Nuclear Information System (INIS)

Geibel, M.A.; Schreiber, E.S.; Bracher, A.K.; Rasche, V.; Hell, E.; Ulrici, J.; Sailer, L.K.; Ozpeynirci, Y.

2015-01-01

The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

Revitalization of open apex teeth with apical periodontitis using a collagen-hydroxyapatite scaffold.

Science.gov (United States)

Nevins, Alan J; Cymerman, Jerome J

2015-06-01

An enhanced revision of the revitalization endodontic technique for immature teeth with apical periodontitis has been described. It includes the addition of collagen-hydroxyapatite scaffold to the currently practiced revascularization technique. Four cases treated in series are presented in this report, 1 case involving 2 teeth. Periapical diagnoses of immature teeth included "asymptomatic apical periodontitis," "symptomatic apical periodontitis," and "acute apical abscess." Additionally, 1 fully developed tooth that had undergone root canal treatment that failed had a periapical diagnosis of acute apical abscess. An established revascularization protocol was used for all teeth. In addition to stimulating blood clots, all teeth were filled with collagen-hydroxyapatite scaffolds. Periapical radiolucencies healed in all teeth, and diffuse radiopacity developed within the coronal portions of canal spaces. Root development with root lengthening occurred in the immature nonvital maxillary premolar that had not undergone prior treatment. The technique of adding a collagen-hydroxyapatite scaffold to the existing revitalization protocol has been described in which substantial hard tissue repair has occurred. This may leave teeth more fully developed and less likely to fracture. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Corrosion-resistant amorphous alloy ribbons for electromagnetic filtration of iron rusts from water

International Nuclear Information System (INIS)

Kawashima, Asahi; Asami, Katsuhiko; Sato, Takeaki; Hashimoto, Koji

1985-01-01

An attempt was made to use corrosion-resistant amorphous Fe-9Cr-13P-7C alloy ribbons as an electromagnetic filter material for trapping various iron rusts suspended in water at 40 0 C. The ferrimagnetic Fe 3 O 4 rust was trapped with the 100 % efficiency and paramagnetic rusts such as α-Fe 2 O 3 , α-FeOOH and amorphous ferric oxyhydroxide were trapped with certain efficiencies at the magnetic field strength of 0.5-10 kOe. The regeneration of the filter by back-washing was easy. The trapping capacity of electromagnetic filter was proportional to the edge length of the filter material where the high magnetic field strength existed. Therefore, melt-spun thin and narrow amorphous alloy ribbons having the high corrosion resistance have the potential utility as electromagnetic filter material. (author)

The influence of API concentration on the roller compaction process: modeling and prediction of the post compacted ribbon, granule and tablet properties using multivariate data analysis.

Science.gov (United States)

Boersen, Nathan; Carvajal, M Teresa; Morris, Kenneth R; Peck, Garnet E; Pinal, Rodolfo

2015-01-01

While previous research has demonstrated roller compaction operating parameters strongly influence the properties of the final product, a greater emphasis might be placed on the raw material attributes of the formulation. There were two main objectives to this study. First, to assess the effects of different process variables on the properties of the obtained ribbons and downstream granules produced from the rolled compacted ribbons. Second, was to establish if models obtained with formulations of one active pharmaceutical ingredient (API) could predict the properties of similar formulations in terms of the excipients used, but with a different API. Tolmetin and acetaminophen, chosen for their different compaction properties, were roller compacted on Fitzpatrick roller compactor using the same formulation. Models created using tolmetin and tested using acetaminophen. The physical properties of the blends, ribbon, granule and tablet were characterized. Multivariate analysis using partial least squares was used to analyze all data. Multivariate models showed that the operating parameters and raw material attributes were essential in the prediction of ribbon porosity and post-milled particle size. The post compacted ribbon and granule attributes also significantly contributed to the prediction of the tablet tensile strength. Models derived using tolmetin could reasonably predict the ribbon porosity of a second API. After further processing, the post-milled ribbon and granules properties, rather than the physical attributes of the formulation were needed to predict downstream tablet properties. An understanding of the percolation threshold of the formulation significantly improved the predictive ability of the models.

Novel hydrated graphene ribbon unexpectedly promotes aged seed germination and root differentiation

Science.gov (United States)

Hu, Xiangang; Zhou, Qixing

2014-01-01

It is well known that graphene (G) induces nanotoxicity towards living organisms. Here, a novel and biocompatible hydrated graphene ribbon (HGR) unexpectedly promoted aged (two years) seed germination. HGR formed at the normal temperature and pressure (120 days hydration), presented 17.1% oxygen, 0.9% nitrogen groups, disorder-layer structure, with 0.38 nm thickness ribbon morphology. Interestingly, there were bulges around the edges of HGR. Compared to G and graphene oxide (GO), HGR increased seed germination by 15% root differentiation between 52 and 59% and enhanced resistance to oxidative stress. The metabonomics analysis discovered that HGR upregulated carbohydrate, amino acid, and fatty acids metabolism that determined secondary metabolism, nitrogen sequestration, cell membrane integrity, permeability, and oxidation resistance. Hexadecanoic acid as a biomarker promoted root differentiation and increased the germination rate. Our discovery is a novel HGR that promotes aged seed germination, illustrates metabolic specificity among graphene-based materials, and inspires innovative concepts in the regulation of seed development.

First-order reversal curve analysis in the hysteretic behavior of boron-rich nanocomposite Nd-Fe-B ribbons

Energy Technology Data Exchange (ETDEWEB)

Saccone, F.D. [Laboratorio de Solidos Amorfos, Departamento de Fisica, Facultad de Ingenieria, Universidad de Buenos Aires (Argentina) and CONICET (Argentina)]. E-mail: fsaccon@fi.uba.ar; Pampillo, L.G. [Laboratorio de Solidos Amorfos, Departamento de Fisica, Facultad de Ingenieria, Universidad de Buenos Aires (Argentina); Oliva, M.I. [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba (Argentina); CONICET (Argentina); Bercoff, P.G. [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba (Argentina); CONICET (Argentina); Bertorello, H.R. [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba (Argentina); CONICET (Argentina); Sirkin, H.R.M. [Laboratorio de Solidos Amorfos, Departamento de Fisica, Facultad de Ingenieria, Universidad de Buenos Aires (Argentina); CONICET (Argentina)

2007-09-01

Structural and magnetic properties of melt-spun Nd{sub 4.5}Fe{sub 72}Co{sub 3}Cr{sub 2}Al{sub 1}B{sub 17.5} ribbons were studied by means of differential scanning calorimetry, Moessbauer effect spectroscopy, X-ray diffraction and first-order reversal curve distributions. The presence of a solid solution (Fe, Co) in ribbons annealed at 685 C for 10 min was detected from Moessbauer spectra. Correlations between the observed structural changes at higher annealing temperatures and modifications in the interaction fields of precipitated phases are discussed.

How far is the root apex of a unilateral impacted canine from the root apices' arch form?

Science.gov (United States)

Kim, Sung-Hun; Kim, You-Min; Oh, Sewoong; Kim, Seong-Sik; Park, Soo-Byung; Son, Woo-Sung; Kim, Yong-Il

2017-02-01

The purpose of this study was to determine the arch form of the root apices of normally erupting teeth and then determine the differences in the location of the apex of impacted canines relative to normally erupting canines. In addition, we sought to determine whether the labiopalatal position of the impacted canines influences the position of the apices. The study included 21 patients with unerupted canines that subsequently had a normal eruption, 21 patients with palatally impacted canines, 27 patients with labially impacted canines, and 17 patients with midalveolus impacted canines. Images were obtained using cone beam computed tomography, and the x, y, and z coordinates of the root apices were determined using Ondemand3D software (Cybermed Co., Seoul, Korea). Two-dimensional coordinates were converted from acquired 3-dimensional coordinates via projection on a palatal plane, and the Procrustes method was used to process the converted 2-dimensional coordinates and to draw the arch forms of the root apices. Finally, we measured the extent of root apex deviation from the arch forms of the root apices. Normally erupting canines showed that even though calcifications may be immature, their positions were aligned with a normal arch form. The root apices of the impacted canines were an average of 6.572 mm away from the root apices' arch form, whereas those of the contralateral nonimpacted canines were an average distance of 2.221 mm away, a statistically significant difference. The palatally impacted canines' root apices distribution tended toward the first premolar root apices. Incompletely calcified, unerupted teeth with a subsequent normal eruption showed a normal arch form of the root apices. The root apices of impacted canines were farther from the arch forms than were the nonimpacted canines. Also, the root apices of impacted canines in the palatal area showed distributions different from those of the other impacted canine groups. Copyright © 2017 American

Breaking into the epithelial apical-junctional complex--news from pathogen hackers.

Science.gov (United States)

Vogelmann, Roger; Amieva, Manuel R; Falkow, Stanley; Nelson, W James

2004-02-01

The epithelial apical-junctional complex is a key regulator of cellular functions. In addition, it is an important target for microbial pathogens that manipulate the cell to survive, proliferate and sometimes persist within a host. Out of a myriad of potential molecular targets, some bacterial and viral pathogens have selected a subset of protein targets at the apical-junctional complex of epithelial cells. Studying how microbes use these targets also teaches us about the inherent physiological properties of host molecules in the context of normal junctional structure and function. Thus, we have learned that three recently uncovered components of the apical-junctional complex of the Ig superfamily--junctional adhesion molecule, Nectin and the coxsackievirus and adenovirus receptor--are important regulators of junction structure and function and represent critical targets of microbial virulence gene products.

Effect of diode laser irradiation on the apical sealing of MTA retrofillings Efeito da irradiação de laser de diodo no selamento apical em retrobturações com MTA

Directory of Open Access Journals (Sweden)

Eliana Barbosa de Souza

2006-09-01

Full Text Available Apical sealing is essential for the success of paraendodontic surgery, so any procedure that may favor an adequate sealing of the apical remainder should be performed. The purpose of this study was to evaluate the influence of diode laser irradiation on the apical sealing of root-end cavities with MTA retrofillings. Root canals in twenty extracted human teeth were shaped with K-files and filled with gutta-percha. The apexes were cut off and root-end preparations were performed. The roots were divided randomly in 2 groups. Group 1 (ten specimens was retrofilled with MTA. Group 2 was irradiated with diode laser, with 1 W for 20 seconds, on the apical surface and root end cavity before retrofilling with MTA. The specimens had their external surfaces impermeabilized with cyanoacrylate, except for the apical surface, and were then immersed in 1% rhodamine B dye for 72 h and placed in plaster stone. After that, the specimens were submitted to longitudinal abrasion until half of the root remained. The linear dye leakage was observed in these mid-roots between the root canal wall and retrofilling. The linear dye leakage was measured with Image Lab software, and the results were statistically analyzed with Student's t test. There were no statistically significant differences between the two groups (p > 0.05. The diode laser irradiation did not improve the apical sealing of MTA retrofillings under the conditions of this in vitro study.O selamento apical é fundamental para o sucesso da cirurgia parendodôntica. Assim, procedimentos que melhorem o selamento do remanescente apical devem ser utilizados. O objetivo deste estudo foi verificar se a irradiação de laser de diodo poderia aumentar o selamento apical em cavidades retrógradas obturadas com MTA. Foram utilizadas 20 raízes de dentes humanos extraídos que, após preparo com lima tipo K, tiveram seus canais obturados com guta-percha. Os ápices foram cortados e sofreram preparo de cavidades retr

Apical Cyst Theory: a Missing Link.

Science.gov (United States)

Huang, George T-J

2010-10-05

The mechanism of the formation of apical cyst has been elusive. Several theories have long been proposed and discussed speculating how an apical cyst is developed and formed in the jaw bone resulting from endododontic infection. Two popular theories are the nutritional deficiency theory and the abscess theory. The nutritional deficiency theory assumes that the over proliferated epithelial cells will form a ball mass such that the cells in the center of the mass will be deprived of nutrition. The abscess theory postulates that when an abscess cavity is formed in connective tissue, epithelial cells proliferate and line the preexisting cavity because of their inherent tendency to cover exposed connective tissue surfaces. Based on the nature of epithelial cells and the epithelium, nutritional theory is a fairy tale, while abscess theory at best just indicates that abscess may be one of the factors that allows the stratified epithelium to form but not to explain a mechanism that makes the cyst to form. Apical cyst formation is the result of proliferation of resting epithelial cells, due to inflammation, to a sufficient number such that they are able to form a polarized and stratified epithelial lining against dead tissues or foreign materials. These stratified epithelial lining expands along the dead tissue or foreign materials and eventually wrap around them as a spherical sac, i.e. a cyst. The space in the sac is considered the external environment separating the internal (tissue) environment - the natural function of epithelium. This theory may be tested by introducing a biodegradable device able to slowly release epithelial cell mitogens in an in vivo environment implanted with epithelial cells next to a foreign object. This will allow the cells to continuously proliferate which may form a cystic sac wrapping around the foreign object.

Utilizing the GentleWave® System for Debridement of Undetected Apical Anatomy.

Science.gov (United States)

Ford, Michael W

2018-03-01

Debriding and disinfecting complex anatomies within the root canal system pose a major challenge during root canal therapy. Even with current chemomechanical techniques, debris and bacterial remnants are commonly left behind, which are generally believed to increase the risk of endodontic failure. This case details the use of a new technique to debride complex apical anatomy in a maxillary molar. A 48-year-old female presented to the clinic with a chief complaint of increasing pain in her tooth. Clinical examination of the right first maxillary molar (#3) revealed moderate sensitivity to percussion and mild sensitivity to palpation. A pulpal diagnosis of symptomatic irreversible pulpitis and a periapi-cal diagnosis of symptomatic apical periodontitis were made. Mechanical instrumentation was performed using rotary file size #25/.04 for the mesiobuccal and distobuccal canals and size #25/.06 for the palatal canal to create a fluid path and enable obturation of the root canal system following the GentleWave® Procedure. The GentleWave Procedure was completed using Multisonic Ultracleaning™ for complete debridement and disinfection of the root canal system. The tooth was obturated using a warm vertical continuous wave obturation technique. Postoperative radiographs revealed complex anatomy within the apical third that was undetected both during pre-operative radiography and mechanical instrumentation. The palatal canal exhibited a complex apical delta with multiple points of exit, and the mesiobuccal canal revealed an undetected lateral canal within the apical third that had a separate and distinct egress. Conclusion and clinical significance: It is important for the clinician to debride and disinfect complex anatomy within the root canal system to reduce the risk of endodontic failure. This case report highlights the clinical significance of utilizing the GentleWave Procedure for detecting complex apical anatomy during endodontic therapy.

Distribution and function of HCN channels in the apical dendritic tuft of neocortical pyramidal neurons.

Science.gov (United States)

Harnett, Mark T; Magee, Jeffrey C; Williams, Stephen R

2015-01-21

The apical tuft is the most remote area of the dendritic tree of neocortical pyramidal neurons. Despite its distal location, the apical dendritic tuft of layer 5 pyramidal neurons receives substantial excitatory synaptic drive and actively processes corticocortical input during behavior. The properties of the voltage-activated ion channels that regulate synaptic integration in tuft dendrites have, however, not been thoroughly investigated. Here, we use electrophysiological and optical approaches to examine the subcellular distribution and function of hyperpolarization-activated cyclic nucleotide-gated nonselective cation (HCN) channels in rat layer 5B pyramidal neurons. Outside-out patch recordings demonstrated that the amplitude and properties of ensemble HCN channel activity were uniform in patches excised from distal apical dendritic trunk and tuft sites. Simultaneous apical dendritic tuft and trunk whole-cell current-clamp recordings revealed that the pharmacological blockade of HCN channels decreased voltage compartmentalization and enhanced the generation and spread of apical dendritic tuft and trunk regenerative activity. Furthermore, multisite two-photon glutamate uncaging demonstrated that HCN channels control the amplitude and duration of synaptically evoked regenerative activity in the distal apical dendritic tuft. In contrast, at proximal apical dendritic trunk and somatic recording sites, the blockade of HCN channels decreased excitability. Dynamic-clamp experiments revealed that these compartment-specific actions of HCN channels were heavily influenced by the local and distributed impact of the high density of HCN channels in the distal apical dendritic arbor. The properties and subcellular distribution pattern of HCN channels are therefore tuned to regulate the interaction between integration compartments in layer 5B pyramidal neurons. Copyright © 2015 the authors 0270-6474/15/351024-14$15.00/0.

HRTEM and neutron diffraction study of LixMo5O17: From the ribbon (x=5) structure to the rock salt (x=12) structure

International Nuclear Information System (INIS)

Lebedev, O.I.; Caignaert, V.; Raveau, B.; Pop, N.; Gozzo, F.; Van Tendeloo, G.; Pralong, V.

2011-01-01

Structure determination of the fully intercalated phase Li 12 Mo 5 O 17 and of the deintercalated oxide Li 5 Mo 5 O 17 has been carried out by electron microscopy and neutron powder diffraction. The reversible topotactic transformation between the ordered rock salt structure of the former and the ribbon structure of the latter (closely related to that of Li 4 Mo 5 O 17 ) is explained on the following basis: both structures can be described as strips built up as an assembly of infinite ribbons of MoO 6 octahedra that are five octahedra thick, and that differ by slight displacements of the octahedral ribbons. We show that the electrochemical behavior of the Li x Mo 5 O 17 system is based on two sorts of Li + sites; those that are located within the strips between the ribbons, and those that are located at the border of the strips. The high rate of Li intercalation in this oxide and its reversibility are discussed in terms of its peculiar structure. -- Graphical abstract: Structure determination of the fully intercalated phase Li 12 Mo 5 O 17 and of the deintercalated oxide Li 5 Mo 5 O 17 has been carried out by electron microscopy and neutron powder diffraction. The reversible topotactic transformation between the ordered rock salt structure of the former and the ribbon structure of the latter is explained on the following basis: both structures can be described as strips built up as an assembly of infinite ribbons of MoO 6 octahedra that are five octahedra thick, and that differ by slight displacements of the octahedral ribbons. We show that the electrochemical behavior of the Li x Mo 5 O 17 system is based on two sorts of Li + sites; those that are located within the strips between the ribbons, and those that are located at the border of the strips. The high rate of Li intercalation in this oxide and its reversibility are discussed in terms of its peculiar structure. Research highlights: → Electron microscopy and neutron powder diffraction structure determination

Identification of apical vertebra for grading of idiopathic scoliosis using image processing.

Science.gov (United States)

Anitha, H; Prabhu, G K

2012-02-01

Scoliosis is a 3-D deformity of spinal column, characterized by both lateral curvature and vertebral rotation. The disease can be caused by congenital, developmental, or degenerative problems; but most cases of scoliosis actually have no known cause, and this is known as idiopathic scoliosis. Vertebral rotation has become increasingly prominent in the study of scoliosis and the most deformed vertebra is named as apical vertebra. Apical vertebral deformity demonstrates significance in both preoperative and postoperative assessment, providing better appreciation of the impact of bracing or surgical interventions. Precise measurement of apical vertebral rotation in terms of grading is most valuable for the determination of reference value in normal and pathological conditions for better understanding of scoliosis. Routine quantitative evaluation of vertebral rotation is difficult and error prone due to limitations of observer characteristic and specific imaging property. This paper proposes automatic identification of the apical vertebra and its parameter that depends on the objective criteria of measurement using active contour models. The proposed technique is more accurate and is a reliable measurement compared to manual and computer-assisted system.

{gamma}-Fe phase plasma-induced on the surface of thin S3A alloy ribbons

Energy Technology Data Exchange (ETDEWEB)

Cabral-Prieto, A., E-mail: agustin.cabral@inin.gob.mx; Garcia-Sosa, I., E-mail: irma.garcia@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Departamento de Quimica (Mexico); Nava, N., E-mail: tnava@imp.mx [Instituto Mexicano del Petroleo, Eje Central Lazaro Cardenas (Mexico); Camps, E., E-mail: enrique.camps@inin.gob.mx; Escobar, Luis, E-mail: luis.escobar@inin.gov.mx [Instituto Nacional de Investigaciones Nucleares, Departamento de Quimica (Mexico); Lopez-Castanarez, R., E-mail: rlc@anuies.mx; Olea-Cardoso, O., E-mail: olc@anuies.mx [Universidad Autonoma del Edo. de Mexico, Facultad de Quimica (Mexico)

2011-11-15

Amorphous alloy ribbons of Fe{sub 77}Cr{sub 2}B{sub 16}Si{sub 5} were exposed to cold plasmas of N{sub 2} and Ar-N{sub 2} at temperatures lower than T{sub x} = 808 K. The conversion X-ray Moessbauer spectra of the plasma-exposed ribbons consist of a singlet and a broadened magnetic sextet. The singlet with isomer shift {delta} = -0.11 mm/s can be assigned to {gamma}-Fe austenite phase. Minor bulk magnetic changes in the alloy were measured as a consequence of these treatments; e.g. the relative intensities A23 of the transmission Moessbauer spectra of the untreated and treated samples, were 3.22 and 3.56, respectively, the B{sub hf} values changed from 22.9 T (untreated sample) to 22.4 T (plasma treated samples). Unexpectedly, the {gamma}-Fe phase can also be produced by simply heating the alloy ribbons under N{sub 2} flux at temperatures as low as 423 K. Moessbauer data of the crystallized samples are also reported, and a qualitative assessment on the mechanical properties of the Fe{sub 77}Cr{sub 2}B{sub 16}Si{sub 5} alloy associated with the plasma and/or temperature surface induced {gamma}-Fe phase is given.

Conversion of proteins from a non-polarized to an apical secretory pattern in MDCK cells

International Nuclear Information System (INIS)

Vogel, Lotte K.; Larsen, Jakob E.; Hansen, Martin; Truffer, Renato

2005-01-01

Previously it was shown that fusion proteins containing the amino terminus of an apical targeted member of the serpin family fused to the corresponding carboxyl terminus of the non-polarized secreted serpin, antithrombin, are secreted mainly to the apical side of MDCK cells. The present study shows that this is neither due to the transfer of an apical sorting signal from the apically expressed proteins, since a sequence of random amino acids acts the same, nor is it due to the deletion of a conserved signal for correct targeting from the non-polarized secreted protein. Our results suggest that the polarity of secretion is determined by conformational sensitive sorting signals

Auditory brainstem activity and development evoked by apical versus basal cochlear implant electrode stimulation in children.

Science.gov (United States)

Gordon, K A; Papsin, B C; Harrison, R V

2007-08-01

The role of apical versus basal cochlear implant electrode stimulation on central auditory development was examined. We hypothesized that, in children with early onset deafness, auditory development evoked by basal electrode stimulation would differ from that evoked more apically. Responses of the auditory nerve and brainstem, evoked by an apical and a basal implant electrode, were measured over the first year of cochlear implant use in 50 children with early onset severe to profound deafness who used hearing aids prior to implantation. Responses at initial stimulation were of larger amplitude and shorter latency when evoked by the apical electrode. No significant effects of residual hearing or age were found on initial response amplitudes or latencies. With implant use, responses evoked by both electrodes showed decreases in wave and interwave latencies reflecting decreased neural conduction time through the brainstem. Apical versus basal differences persisted with implant experience with one exception; eIII-eV interlatency differences decreased with implant use. Acute stimulation shows prolongation of basally versus apically evoked auditory nerve and brainstem responses in children with severe to profound deafness. Interwave latencies reflecting neural conduction along the caudal and rostral portions of the brainstem decreased over the first year of implant use. Differences in neural conduction times evoked by apical versus basal electrode stimulation persisted in the caudal but not rostral brainstem. Activity-dependent changes of the auditory brainstem occur in response to both apical and basal cochlear implant electrode stimulation.

Vickers Microhardness and Hyperfine Magnetic Field Variations of Heat Treated Amorphous Fe{sub 78}Si{sub 9}B{sub 13} Alloy Ribbons

Energy Technology Data Exchange (ETDEWEB)

Cabral-Prieto, A., E-mail: acpr@nuclear.inin.mx [Instituto Nacional de Investigaciones Nucleares, Department of Chemistry (Mexico); Garcia-Santibanez, F.; Lopez, A.; Lopez-Castanares, R.; Olea Cardoso, O. [Universidad Autonoma del Estado de Mexico, El Cerrillo Piedras Blancas, Facultad de Ciencias (Mexico)

2005-02-15

Amorphous Fe{sub 78}Si{sub 9}B{sub 13} alloy ribbons were heat treated between 296 and 763 K, using heating rates between 1 and 4.5 K/min. Whereas one ribbon partially crystallized at T{sub x} = 722 K, the other one partially crystallized at T{sub x} = 763 K. The partially crystallized ribbon at 722 K, heat treated using a triangular form for the heating and cooling rates, was substantially less fragile than the partially crystallized at 763 K where a tooth saw form for the heating and cooling rates was used. Vickers microhardness and hyperfine magnetic field values behaved almost concomitantly between 296 and 673 K. The Moessbauer spectral line widths of the heat-treated ribbons decreased continuously from 296 to 500 K, suggesting stress relief in this temperature range where the Vickers microhardness did not increase. At 523 K the line width decreased further but the microhardness increased substantially. After 523 K the line width behave in an oscillating form as well as the microhardness, indicating other structural changes in addition to the stress relief. Finally, positron lifetime data showed that both inner part and surface of Fe{sub 78}Si{sub 9}B{sub 13} alloy ribbons were affected distinctly. Variations on the surface may be the cause of some of the high Vickers microhardness values measured in the amorphous state.

Type III apical transportation of root canal

Directory of Open Access Journals (Sweden)

Shiv P Mantri

2012-01-01

Full Text Available Procedural accidents leading to complications such as canal transportation have been ascribed to inapt cleaning and shaping concepts. Canal transportation is an undesirable deviation from the natural canal path. Herewith a case of apical transportation of root canal resulting in endodontic retreatment failure and its management is presented. A healthy 21-year-old young male presented discomfort and swelling associated with painful endodontically retreated maxillary incisor. Radiograph revealed periradicular radiolucency involving underfilled 11 and overfilled 12. Insufficiently obturated 11 exhibited apical transportation of canal. This type III transportation was treated by periradicular surgery and repair using white mineral trioxide aggregate (MTA. Comfortable asymptomatic patient presented uneventful healing at third and fourth month recall visits. A decrease in the size of radiolucency in radiograph supported the clinical finding. In the present case, MTA is useful in repairing the transportation defect. The result of these procedures is predictable and successful.

Behavior of the potential-induced degradation of photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations

Science.gov (United States)

Yamaguchi, Seira; Masuda, Atsushi; Ohdaira, Keisuke

2016-04-01

This paper deals with the dependence of the potential-induced degradation (PID) of flat, p-type mono-crystalline silicon solar cell modules on the surface orientation of solar cells. The investigated modules were fabricated from p-type mono-crystalline silicon cells with a (100) or (111) surface orientation using a module laminator. PID tests were performed by applying a voltage of -1000 V to shorted module interconnector ribbons with respect to an Al plate placed on the cover glass of the modules at 85 °C. A decrease in the parallel resistance of the (100)-oriented cell modules is more significant than that of the (111)-oriented cell modules. Hence, the performance of the (100)-oriented-cell modules drastically deteriorates, compared with that of the (111)-oriented-cell modules. This implies that (111)-oriented cells offer a higher PID resistance.

Changes of Root Length and Root-to-Crown Ratio after Apical Surgery

DEFF Research Database (Denmark)

von Arx, Thomas; Jensen, Simon S; Bornstein, Michael M

2015-01-01

INTRODUCTION: Apical surgery is an important treatment option for teeth with post-treatment periodontitis. Although apical surgery involves root-end resection, no morphometric data are yet available about root-end resection and its impact on the root-to-crown ratio (RCR). The present study assess...

An in vitro comparison of apically extruded debris using three rotary nickel-titanium instruments

Directory of Open Access Journals (Sweden)

Tamer Tasdemir

2010-09-01

Conclusion: According to this study, all instrumentation techniques apically extruded debris through the apical foramen. However, the BioRaCe instruments induced less extruded debris than the ProTaper Universal and Mtwo rotary systems.

Chimaerin suppresses Rac1 activation at the apical membrane to maintain the cyst structure.

Directory of Open Access Journals (Sweden)

Shunsuke Yagi

Full Text Available Epithelial organs are made of a well-polarized monolayer of epithelial cells, and their morphology is maintained strictly for their proper functions. Previously, we showed that Rac1 activation is suppressed at the apical membrane in the mature organoid, and that such spatially biased Rac1 activity is required for the polarity maintenance. Here we identify Chimaerin, a GTPase activating protein for Rac1, as a suppressor of Rac1 activity at the apical membrane. Depletion of Chimaerin causes over-activation of Rac1 at the apical membrane in the presence of hepatocyte growth factor (HGF, followed by luminal cell accumulation. Importantly, Chimaerin depletion did not inhibit extension formation at the basal membrane. These observations suggest that Chimaerin functions as the apical-specific Rac1 GAP to maintain epithelial morphology.

A reappraisal of the role of abscisic acid and its interaction with auxin in apical dominance.

Science.gov (United States)

Cline, Morris G; Oh, Choonseok

2006-10-01

Evidence from pea rms1, Arabidopsis max4 and petunia dad1 mutant studies suggest an unidentified carotenoid-derived/plastid-produced branching inhibitor which moves acropetally from the roots to the shoots and interacts with auxin in the control of apical dominance. Since the plant hormone, abscisic acid (ABA), known to inhibit some growth processes, is also carotenoid derived/plastid produced, and because there has been indirect evidence for its involvement with branching, a re-examination of the role of ABA in apical dominance is timely. Even though it has been determined that ABA probably is not the second messenger for auxin in apical dominance and is not the above-mentioned unidentified branching inhibitor, the similarity of their derivation suggests possible relationships and/or interactions. The classic Thimann-Skoog auxin replacement test for apical dominance with auxin [0.5 % naphthalene acetic acid (NAA)] applied both apically and basally was combined in similar treatments with 1 % ABA in Ipomoea nil (Japanese Morning Glory), Solanum lycopersicum (Better Boy tomato) and Helianthus annuus (Mammoth Grey-striped Sunflower). Auxin, apically applied to the cut stem surface of decapitated shoots, strongly restored apical dominance in all three species, whereas the similar treatment with ABA did not. However, when ABA was applied basally, i.e. below the lateral bud of interest, there was a significant moderate repression of its outgrowth in Ipomoea and Solanum. There was also some additive repression when apical auxin and basal ABA treatments were combined in Ipomoea. The finding that basally applied ABA is able partially to restore apical dominance via acropetal transport up the shoot suggests possible interactions between ABA, auxin and the unidentified carotenoid-derived branching inhibitor that justify further investigation.

Laparoscopic pectopexy: initial experience of single center with a new technique for apical prolapse surgery

Directory of Open Access Journals (Sweden)

Ahmet Kale

Full Text Available ABSTRACT Objective: To share our first experience with laparoscopic pectopexy, a new technique for apical prolapse surgery, and to evaluate the feasibility of this technique. Materials and Methods: Seven patients with apical prolapse underwent surgery with laparoscopic pectopexy. The lateral parts of the iliopectineal ligament were used for a bilateral mesh fixation of the descended structures. The medical records of the patients were reviewed, and the short-term clinical outcomes were analyzed. Results: The laparoscopic pectopexy procedures were successfully performed, without intraoperative and postoperative complications. De novo apical prolapse, de novo urgency, de novo constipation, stress urinary incontinence, anterior and lateral defect cystoceles, and rectoceles did not occur in any of the patients during a 6-month follow-up period. Conclusion: Although laparoscopic sacrocolpopexy has shown excellent anatomical and functional long-term results, laparoscopic pectopexy offers a feasible, safe, and comfortable alternative for apical prolapse surgery. Pectopexy may increase a surgeon's technical perspective for apical prolapse surgery.

N-Glycosylation instead of cholesterol mediates oligomerization and apical sorting of GPI-APs in FRT cells.

Science.gov (United States)

Imjeti, Naga Salaija; Lebreton, Stéphanie; Paladino, Simona; de la Fuente, Erwin; Gonzalez, Alfonso; Zurzolo, Chiara

2011-12-01

Sorting of glycosylphosphatidyl-inositol--anchored proteins (GPI-APs) in polarized epithelial cells is not fully understood. Oligomerization in the Golgi complex has emerged as the crucial event driving apical segregation of GPI-APs in two different kind of epithelial cells, Madin-Darby canine kidney (MDCK) and Fisher rat thyroid (FRT) cells, but whether the mechanism is conserved is unknown. In MDCK cells cholesterol promotes GPI-AP oligomerization, as well as apical sorting of GPI-APs. Here we show that FRT cells lack this cholesterol-driven oligomerization as apical sorting mechanism. In these cells both apical and basolateral GPI-APs display restricted diffusion in the Golgi likely due to a cholesterol-enriched membrane environment. It is striking that N-glycosylation is the critical event for oligomerization and apical sorting of GPI-APs in FRT cells but not in MDCK cells. Our data indicate that at least two mechanisms exist to determine oligomerization in the Golgi leading to apical sorting of GPI-APs. One depends on cholesterol, and the other depends on N-glycosylation and is insensitive to cholesterol addition or depletion.

A Test of the Interstellar Boundary EXplorer Ribbon Formation in the Outer Heliosheath

Energy Technology Data Exchange (ETDEWEB)

Gamayunov, Konstantin V.; Rassoul, Hamid [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Heerikhuisen, Jacob, E-mail: kgamayunov@fit.edu [Department of Space Science, University of Alabama in Huntsville, Huntsville, AL 35899 (United States)

2017-08-10

NASA’s Interstellar Boundary EXplorer ( IBEX ) mission is imaging energetic neutral atoms (ENAs) propagating to Earth from the outer heliosphere and local interstellar medium (LISM). A dominant feature in all ENA maps is a ribbon of enhanced fluxes that was not predicted before IBEX . While more than a dozen models of the ribbon formation have been proposed, consensus has gathered around the so-called secondary ENA model. Two classes of secondary ENA models have been proposed; the first class assumes weak scattering of the energetic pickup protons in the LISM, and the second class assumes strong but spatially localized scattering. Here we present a numerical test of the “weak scattering” version of the secondary ENA model using our gyro-averaged kinetic model for the evolution of the phase-space distribution of protons in the outer heliosheath. As input for our test, we use distributions of the primary ENAs from our MHD-plasma/kinetic-neutral model of the heliosphere-LISM interaction. The magnetic field spectrum for the large-scale interstellar turbulence and an upper limit for the amplitude of small-scale local turbulence (SSLT) generated by protons are taken from observations by Voyager 1 in the LISM. The hybrid simulations of energetic protons are also used to set the bounding wavenumbers for the spectrum of SSLT. Our test supports the “weak scattering” version. This makes an additional solid step on the way to understanding the origin and formation of the IBEX ribbon and thus to improving our understanding of the interaction between the heliosphere and the LISM.

Magnetocaloric properties of as-quenched Ni{sub 50.4}Mn{sub 34.9}In{sub 14.7} ferromagnetic shape memory alloy ribbons

Energy Technology Data Exchange (ETDEWEB)

Sanchez Llamazares, J.L. [Instituto Potosino de Investigacion Cientifica y Tecnologica (IPICYT), San Luis Potosi, S.L.P. (Mexico); Garcia, C. [MIT, Department of Materials Science and Engineering, Massachusetts (United States); Hernando, B.; Prida, V.M. [Universidad de Oviedo, Departamento de Fisica, Facultad de Ciencias, Oviedo (Spain); Baldomir, D.; Serantes, D. [Universidade de Santiago de Compostela, Departamento de Fisica Aplicada, Facultad de Fisica, Santiago de Compostela (Spain); Gonzalez, J. [UPV, Departamento Fisica de Materiales, Facultad de Quimica, San Sebastian (Spain)

2011-06-15

The temperature dependences of magnetic entropy change and refrigerant capacity have been calculated for a maximum field change of {delta} H=30 kOe in as-quenched ribbons of the ferromagnetic shape memory alloy Ni{sub 50.4}Mn{sub 34.9}In{sub 14.7} around the structural reverse martensitic transformation and magnetic transition of austenite. The ribbons crystallize into a single-phase austenite with the L2{sub 1}-type crystal structure and Curie point of 284 K. At 262 K austenite starts its transformation into a 10-layered structurally modulated monoclinic martensite. The first- and second-order character of the structural and magnetic transitions was confirmed by the Arrott plot method. Despite the superior absolute value of the maximum magnetic entropy change obtained in the temperature interval where the reverse martensitic transformation occurs ({delta}S{sub M} {sup max}=7.2 Jkg{sup -1}K{sup -1}) with respect to that obtained around the ferromagnetic transition of austenite ({delta} S{sub M} {sup max}=2.6 Jkg{sup -1}K{sup -1}), the large average hysteretic losses due to the effect of the magnetic field on the phase transformation as well as the narrow thermal dependence of the magnetic entropy change make the temperature interval around the ferromagnetic transition of austenite of a higher effective refrigerant capacity (RC{sup magn}{sub eff}=95Jkg{sup -1} versus RC{sup struct}{sub eff}=60Jkg{sup -1}). (orig.)

ATRF Ribbon-Cutting Ceremony Coincides with Chamber of Commerce Centennial Gala | Poster

Science.gov (United States)

By Frank Blanchard, Staff Writer U.S. Rep. Roscoe Bartlett, NCI Deputy Director for Management John Czajkowski, and SAIC Corporate Chief Executive Officer (CEO) John Jumper were joined by representatives of the Frederick County Chamber of Commerce in cutting the ribbon for the National Cancer Institute’s Advanced Technology Research Facility (ATRF).

75 FR 66766 - NIAID Blue Ribbon Panel Meeting on Adjuvant Discovery and Development

Science.gov (United States)

2010-10-29

..., identifies gaps in knowledge and capabilities, and defines NIAID's goals for the continued discovery...), will convene a Blue Ribbon Panel to provide expertise in developing a strategic plan and research... vaccines. NIAID has developed a draft Strategic Plan and Research Agenda for Adjuvant Discovery and...

Relationship Between Peripheral and Psychophysical Measures of Amplitude Modulation Detection in Cochlear Implant Users.

Science.gov (United States)

Tejani, Viral D; Abbas, Paul J; Brown, Carolyn J

This study investigates the relationship between electrophysiological and psychophysical measures of amplitude modulation (AM) detection. Prior studies have reported both measures of AM detection recorded separately from cochlear implant (CI) users and acutely deafened animals, but no study has made both measures in the same CI users. Animal studies suggest a progressive loss of high-frequency encoding as one ascends the auditory pathway from the auditory nerve to the cortex. Because the CI speech processor uses the envelope of an ongoing acoustic signal to modulate pulse trains that are subsequently delivered to the intracochlear electrodes, it is of interest to explore auditory nerve responses to modulated stimuli. In addition, psychophysical AM detection abilities have been correlated with speech perception outcomes. Thus, the goal was to explore how the auditory nerve responds to AM stimuli and to relate those physiologic measures to perception. Eight patients using Cochlear Ltd. Implants participated in this study. Electrically evoked compound action potentials (ECAPs) were recorded using a 4000 pps pulse train that was sinusoidally amplitude modulated at 125, 250, 500, and 1000 Hz rates. Responses were measured for each pulse over at least one modulation cycle for an apical, medial, and basal electrode. Psychophysical modulation detection thresholds (MDTs) were also measured via a three-alternative forced choice, two-down, one-up adaptive procedure using the same modulation frequencies and electrodes. ECAPs were recorded from individual pulses in the AM pulse train. ECAP amplitudes varied sinusoidally, reflecting the sinusoidal variation in the stimulus. A modulated response amplitude (MRA) metric was calculated as the difference in the maximal and minimum ECAP amplitudes over the modulation cycles. MRA increased as modulation frequency increased, with no apparent cutoff (up to 1000 Hz). In contrast, MDTs increased as the modulation frequency increased. This

Modeling the excitation of graphene plasmons in periodic grids of graphene ribbons: An analytical approach

DEFF Research Database (Denmark)

Gonçalves, P:A.D.; Dias, E. J. C.; Bludov, Yu V.

2016-01-01

We study electromagnetic scattering and subsequent plasmonic excitations in periodic grids of graphene ribbons. To address this problem, we develop an analytical method to describe the plasmon-assisted absorption of electromagnetic radiation by a periodic structure of graphene ribbons forming...... a diffraction grating for THz and mid-IR light. The major advantage of this method lies in its ability to accurately describe the excitation of graphene surface plasmons (GSPs) in one-dimensional (1D) graphene gratings without the use of both time-consuming, and computationally demanding full-wave numerical...... compare the theoretical data with spectra taken from experiments, for which we observe a very good agreement. These theoretical tools may therefore be applied to design new experiments and cutting-edge nanophotonic devices based on graphene plasmonics....

Effects of material non-linearity on the residual stresses in a dendritic silicon crystal ribbon

Science.gov (United States)

Ray, Sujit K.; Utku, Senol

1990-01-01

Thermal stresses developed in a dendritic silicon crystal ribbon have been shown to cause plastic deformation and residual stresses in the ribbon. This paper presents an implementation of a numerical model proposed for thermoelastoplastic behavior of a material. The model has been used to study the effects of plasticity of silicon on the residual stresses. The material properties required to implement this model are all assumed, and the response of the material to the variations in these assumed parameters of the constitutive law and in the finite element mesh is investigated. The steady state growth process is observed to be periodic with nonzero residual stresses. Numerical difficulties are also encountered in the computer solution process, resulting in sharp jumps and large oscillations in the stress responses.

Effect of reciprocating systems and working lengths on apical microcrack development: a micro-CT Study

International Nuclear Information System (INIS)

Oliveira, Bruna Paloma de; Câmara, Andréa Cruz; Duarte, Daniel Amancio; Antonino, Antonio Celso Dantas; Aguiar, Carlos Menezes; Heck, Richard John

2017-01-01

The objective of this study was to evaluate the effect of root canal preparation with single-file reciprocating systems at different working lengths on the development of apical microcracks using micro-computed tomographic (micro-CT) imaging. Forty extracted human mandibular incisors were randomly assigned to 4 groups (n=10) according to the systems and working length used to prepare the root canals: Group A - WaveOne Gold at apical foramen (AF), Group B - WaveOne Gold 1 mm short of the AF (AF-1 mm), Group C - Unicone (AF) and Group D - Unicone (AF-1 mm). Micro-CT scanning was performed before and after root canal preparation at an isotropic resolution of 14 μm. Then, three examiners assessed the cross-sectional images generated to detect microcracks in the apical portion of the roots. Apical microcracks were visualized in 3, 1, 1, and 3 specimens in groups A, B, C, and D, respectively. All these microcracks observed after root canal preparation already existed prior to instrumentation, and no new apical microcrack was detected. For all groups, the number of slices presenting microcracks after root canal preparation was the same as before canal preparation. Root canal preparation with WaveOne Gold and Unicone, regardless of the working length, was not associated with apical microcrack formation. (author)

Effect of reciprocating systems and working lengths on apical microcrack development: a micro-CT Study

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Bruna Paloma de; Câmara, Andréa Cruz; Duarte, Daniel Amancio; Antonino, Antonio Celso Dantas; Aguiar, Carlos Menezes, E-mail: bruna_paloma@msn.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Heck, Richard John [Department of Land Resource Science, University of Guelph (Canada)

2017-11-15

The objective of this study was to evaluate the effect of root canal preparation with single-file reciprocating systems at different working lengths on the development of apical microcracks using micro-computed tomographic (micro-CT) imaging. Forty extracted human mandibular incisors were randomly assigned to 4 groups (n=10) according to the systems and working length used to prepare the root canals: Group A - WaveOne Gold at apical foramen (AF), Group B - WaveOne Gold 1 mm short of the AF (AF-1 mm), Group C - Unicone (AF) and Group D - Unicone (AF-1 mm). Micro-CT scanning was performed before and after root canal preparation at an isotropic resolution of 14 μm. Then, three examiners assessed the cross-sectional images generated to detect microcracks in the apical portion of the roots. Apical microcracks were visualized in 3, 1, 1, and 3 specimens in groups A, B, C, and D, respectively. All these microcracks observed after root canal preparation already existed prior to instrumentation, and no new apical microcrack was detected. For all groups, the number of slices presenting microcracks after root canal preparation was the same as before canal preparation. Root canal preparation with WaveOne Gold and Unicone, regardless of the working length, was not associated with apical microcrack formation. (author)

Basolateral cholesterol depletion alters Aquaporin-2 post-translational modifications and disrupts apical plasma membrane targeting.

Science.gov (United States)

Moeller, Hanne B; Fuglsang, Cecilia Hvitfeldt; Pedersen, Cecilie Nøhr; Fenton, Robert A

2018-01-01

Apical plasma membrane accumulation of the water channel Aquaporin-2 (AQP2) in kidney collecting duct principal cells is critical for body water homeostasis. Posttranslational modification (PTM) of AQP2 is important for regulating AQP2 trafficking. The aim of this study was to determine the role of cholesterol in regulation of AQP2 PTM and in apical plasma membrane targeting of AQP2. Cholesterol depletion from the basolateral plasma membrane of a collecting duct cell line (mpkCCD14) using methyl-beta-cyclodextrin (MBCD) increased AQP2 ubiquitylation. Forskolin, cAMP or dDAVP-mediated AQP2 phosphorylation at Ser269 (pS269-AQP2) was prevented by cholesterol depletion from the basolateral membrane. None of these effects on pS269-AQP2 were observed when cholesterol was depleted from the apical side of cells, or when MBCD was applied subsequent to dDAVP stimulation. Basolateral, but not apical, MBCD application prevented cAMP-induced apical plasma membrane accumulation of AQP2. These studies indicate that manipulation of the cholesterol content of the basolateral plasma membrane interferes with AQP2 PTM and subsequently regulated apical plasma membrane targeting of AQP2. Copyright © 2017 Elsevier Inc. All rights reserved.

Antimicrobial photodynamic therapy for the treatment of teeth with apical periodontitis: a histopathological evaluation.

Science.gov (United States)

Silva, Lea Assed Bezerra; Novaes, Arthur B; de Oliveira, Rafael R; Nelson-Filho, Paulo; Santamaria, Milton; Silva, Raquel Assed Bezerra

2012-03-01

This study evaluated the in vivo response of apical and periapical tissues of dogs' teeth with apical periodontitis after one-session endodontic treatment with and without antimicrobial photodynamic therapy (aPDT). Sixty root canals with experimentally induced apical periodontitis were instrumented and assigned to 4 groups receiving aPDT and root canal filling (RCF) or not: group aPDT+/RCF+ (n = 20): aPDT (photosensitizer phenothiazine chloride at 10 mg/mL for 3 minutes and diode laser [λ = 660 nm, 60 mW/cm(2)] for 1 minute) and RCF in the same session; group aPDT+/RCF- (n = 10); group aPDT-/RCF+ (n = 20), and group aPDT-/RCF- (n = 10). Teeth were restored, and the animals were killed after 90 days. Sections from the maxillas and mandibles were stained with hematoxylin-eosin and Mallory trichrome and examined under light microscopy. Descriptive (ie, newly formed apical mineralized tissue, periapical inflammatory infiltrate, apical periodontal ligament thickness, and mineralized tissue resorption) and quantitative (ie, periapical lesion size and number of inflammatory cells) microscopic analysis was performed. Quantitative data were analyzed by the Kruskal-Wallis and Dunn tests (α = .05). In the aPDT-treated groups, the periapical region was moderately/severely enlarged with no inflammatory cells, moderate neoangiogenesis and fibrogenesis, and the smallest periapical lesions. Although apical closure by mineralized tissue deposition was not achieved, the absence of inflammatory cells, moderate neoangiogenesis, and fibrogenesis in the periapical region in the groups treated with aPDT indicate that this can be a promising adjunct therapy to cleaning and shaping procedures in teeth with apical periodontitis undergoing one-session endodontic treatment. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Apical extrusion of debris in primary molar root canals using mechanical and manual systems.

Science.gov (United States)

Buldur, B; Hascizmeci, C; Aksoy, S; Nur Aydin, M; Guvendi, O N

2018-03-01

Apical extrusion of debris in primary root canal treatment has not been well elucidated. The purpose of this study is to compare the amount of apically extruded debris during the preparation of primary molar root canals using ProTaper, ProTaper Next, Self-adjusting File (SAF) and hand files. One hundred sixty extracted primary mandibular molar teeth were assigned to 2 groups: Group 1: Resorbed (n=80) and Group 2: Non-resorbed (n=80) and randomly to four subgroups (n=20 teeth for each subgroup) according to the instruments used, ProTaper, ProTaper Next, SAF, and hand file. The apically extruded debris was collected and dried in preweighed Eppendof tubes. The dry weight was calculated by subtracting the preoperative weight from the postoperative weight. Data were analysed statistically using the ANOVA and the Bonferroni post hoc t-test. The amount of apically extruded debris was significantly less for the non-resorbed group compared to the resorbed group (PProTaper Next and SAF extruded significantly less debris than did the ProTaper and hand files (PProTaper Next and SAF (P>0.05). All instruments caused apically extruded debris in primary teeth.

Growth behaviour of twisted ribbons of barium carbonate/silica self-assembled ceramics

International Nuclear Information System (INIS)

Garcia-Ruiz, J.M.; Moreno, A.

1997-01-01

Twisted ribbons of self-assembled crystal aggregates of barium carbonate, in the presence of silicate ions at pH 9.5 grow at constant rate between 20 and 50 mu m/min. The morphological behaviour depends on temperature, while it was demonstrated to be independent of the viscosity of the growth environment. (Author) 7 refs

Decreased Expression of Semaphorin3A/Neuropilin-1 Signaling Axis in Apical Periodontitis

Directory of Open Access Journals (Sweden)

Ying Lin

2017-01-01

Full Text Available Apical periodontitis (AP is a chronic infection of endodontic origin accompanied with bone destruction around the apical region. Semaphorin3A (Sema3A and neuropilin-1 (Nrp1 are regarded as a pair of immune regulators in bone metabolism. In this study, we firstly investigated the expression pattern of Sema3A/Nrp1 in apical periodontitis and its correlation with bone destruction. Using rat animal model, we analysed the level of mandibular bone destruction and the expression of Sema3A/Nrp1 on days 0, 7, 14, 21, 28, and 35 after pulp exposure. In addition, clinical samples from apical periodontitis patients were obtained to analyse the expression of Sema3A/Nrp1. These results indicated that the bone destruction level expanded from days 7 to 35. The number of positive cells and level of mRNA expression of Sema3A/Nrp1 were significantly decreased from days 7 to 35, with a negative correlation with bone destruction. Moreover, expression of Sema3A/Nrp1 in the AP group was reduced compared to the control group of clinical samples. In conclusion, decreased expression of Sema3A/Nrp1 was observed in periapical lesions and is potentially involved in the bone resorption of the periapical area, suggesting that Sema3A/Nrp1 may contribute to the pathological development of apical periodontitis.

Strategies to reduce the apical necrosis in vitro multiplication and rooting of Pistachio

Directory of Open Access Journals (Sweden)

Mariela Cid

2016-07-01

Full Text Available The pistachio (Pistacia sp. is one of the least exploited fruit among the main causes is the high cost of plant material by the difficulties of propagation of the species. The propagation in vitro offers great potential for the industry of this species by multiplication scale of selected clones. The aim of this study was to control the apical necrosis of outbreaks in the in vitro propagation Pistachio. From young shoots of plants of this species kept in growing houses, proceeded to disinfection with sodium hypochlorite 1% for different times. The apical and axillary buds were established in the culture medium Murashige and Skoog (1962 modified and supplemented with 1 mg/L Metatopolina. Different types of bottles, number and type of explants and culture media formulations for two subcultures multiplication and rooting were evaluated. Glass flask of 200 ml capacity, and line proliferates DKW medium achieved the lowest values apical necrosis. In the multiplication phase values were low in all treatments tested no statistical difference between them compared to rooting where apical necrosis reached higher values. The average DKW and prolific lines obtained lower values. MS medium modified crop, favored the number of segments rooted and DKW (Driver and Kuniyuki, 1984 the number of segments that sprouted, the latter having lower incidence of apical necrosis.

Calmodulin and CaMKII modulate ENaC activity by regulating the association of MARCKS and the cytoskeleton with the apical membrane.

Science.gov (United States)

Alli, Abdel A; Bao, Hui-Fang; Liu, Bing-Chen; Yu, Ling; Aldrugh, Summer; Montgomery, Darrice S; Ma, He-Ping; Eaton, Douglas C

2015-09-01

Phosphatidylinositol bisphosphate (PIP2) regulates epithelial sodium channel (ENaC) open probability. In turn, myristoylated alanine-rich C kinase substrate (MARCKS) protein or MARCKS-like protein 1 (MLP-1) at the plasma membrane regulates the delivery of PIP2 to ENaC. MARCKS and MLP-1 are regulated by changes in cytosolic calcium; increasing calcium promotes dissociation of MARCKS from the membrane, but the calcium-regulatory mechanisms are unclear. However, it is known that increased intracellular calcium can activate calmodulin and we show that inhibition of calmodulin with calmidazolium increases ENaC activity presumably by regulating MARCKS and MLP-1. Activated calmodulin can regulate MARCKS and MLP-1 in two ways. Calmodulin can bind to the effector domain of MARCKS or MLP-1, inactivating both proteins by causing their dissociation from the membrane. Mutations in MARCKS that prevent calmodulin association prevent dissociation of MARCKS from the membrane. Calmodulin also activates CaM kinase II (CaMKII). An inhibitor of CaMKII (KN93) increases ENaC activity, MARCKS association with ENaC, and promotes MARCKS movement to a membrane fraction. CaMKII phosphorylates filamin. Filamin is an essential component of the cytoskeleton and promotes association of ENaC, MARCKS, and MLP-1. Disruption of the cytoskeleton with cytochalasin E reduces ENaC activity. CaMKII phosphorylation of filamin disrupts the cytoskeleton and the association of MARCKS, MLP-1, and ENaC, thereby reducing ENaC open probability. Taken together, these findings suggest calmodulin and CaMKII modulate ENaC activity by destabilizing the association between the actin cytoskeleton, ENaC, and MARCKS, or MLP-1 at the apical membrane. Copyright © 2015 the American Physiological Society.

Determination of apical constriction and apical foramen using electronic apex locator in vivo: Comparison between vital and nonvital teeth

Directory of Open Access Journals (Sweden)

Gaurav Aggarwal

2018-01-01

Conclusion: The study supports that EAL measures the location of AC and apical foramen with similar accuracy in vital and nonvital teeth. Furthermore, the distance between the two is reliable when compared with the actual distance observed under stereomicroscope supporting its widespread usage in clinical endodontics.

Correlation between prostate brachytherapy-related urethral stricture and peri-apical urethral dosimetry: A matched case–control study

International Nuclear Information System (INIS)

Earley, James J.; Abdelbaky, Ather M.; Cunningham, Melanie J.; Chadwick, Eliot; Langley, Stephen E.M.; Laing, Robert W.

2012-01-01

Background and purpose: Radiation dose to the bulbomembranous urethra has been shown to correlate with urethral stricture formation. This retrospective case–control study was designed to explore the relationship between dose to the apical/peri-apical regions of the urethra and development of brachytherapy (BXT)-related urethral stricture. Materials and methods: Cases were patients who developed urethral stricture after treatment with BXT as monotherapy and who had urethral dosimetry post-implant. Each case was matched with a control that had not developed urethral stricture. Dosimetry was compared between cases and controls. Results: Twenty-three cases were pair matched with 23 controls. There were no significant differences between the two groups in terms of age, presenting Prostate Specific Antigen (PSA), International Prostate Symptom Score (IPSS) or Gleason score. The dose delivered to the peri-apical and apical urethra was significantly higher for cases when compared with controls (peri-apical urethra: mean V 150 1.1 Vs 0.8 cc [p = 0.02]; apical urethra: mean dose 200 Vs 174 Gy [p = 0.01]). The distance from the prostate apex to isodose lines was also found to be significant in predicting stricture formation. Conclusion: There was evidence to suggest that the development of BXT-related stricture was associated with radiation dose at the apical and peri-apical urethra. Attention to the dose delivered to those areas may minimise the risk of developing such morbidity.

Through-flow of water in leaves of a submerged plant is influenced by the apical opening

DEFF Research Database (Denmark)

Pedersen, Ole; Jørgensen, Lise Bolt; Sand-Jensen, Kaj

1997-01-01

Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity......Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity...

Root canal microbiota of teeth with chronic apical periodontitis.

Science.gov (United States)

Rôças, I N; Siqueira, J F

2008-11-01

Samples from infected root canals of 43 teeth with chronic apical periodontitis were analyzed for the presence and relative levels of 83 oral bacterial species and/or phylotypes using a reverse-capture checkerboard hybridization assay. Associations between the most frequently detected taxa were also recorded. The most prevalent taxa were Olsenella uli (74%), Eikenella corrodens (63%), Porphyromonas endodontalis (56%), Peptostreptococcus anaerobius (54%), and Bacteroidetes oral clone X083 (51%). When prevalence was considered only for bacteria present at levels >10(5), Bacteroidetes clone X083 was the most frequently isolated bacterium (37%), followed by Parvimonas micra (28%), E. corrodens (23%), and Tannerella forsythia (19%). The number of target taxa per canal was directly proportional to the size of the apical periodontitis lesion, with lesions >10 mm in diameter harboring a mean number of approximately 20 taxa. Several positive associations for the most prevalent taxa were disclosed for the first time and may have important ecological and pathogenic implications. In addition to strengthening the association of several cultivable named species with chronic apical periodontitis, the present findings using a large-scale analysis allowed the inclusion of some newly named species and as-yet-uncultivated phylotypes in the set of candidate pathogens associated with this disease.

Prevalence, clinical significance, and natural history of left ventricular apical aneurysms in hypertrophic cardiomyopathy.

Science.gov (United States)

Maron, Martin S; Finley, John J; Bos, J Martijn; Hauser, Thomas H; Manning, Warren J; Haas, Tammy S; Lesser, John R; Udelson, James E; Ackerman, Michael J; Maron, Barry J

2008-10-07

Hypertrophic cardiomyopathy (HCM) is the most common genetic heart disease characterized by a diverse clinical and phenotypic spectrum. This study reports the prevalence, morphology, clinical course, and management of an underrecognized subgroup of HCM patients with left ventricular apical aneurysms. Of 1299 HCM patients, 28 (2%) were identified with left ventricular apical aneurysms, including a pair of identical twins. Aneurysms were recognized at a wide age range (26 to 83 years), including 12 patients (43%) who were rims, and were associated with transmural (and often more extensive) myocardial scarring identified by late gadolinium enhancement cardiovascular magnetic resonance. Apical aneurysms were recognized by echocardiography in only 16 of 28 patients (57%) but by cardiovascular magnetic resonance in the 12 patients undetected by echocardiography. Left ventricular chamber morphology varied; however, 19 patients (68%) showed an "hourglass" contour, with midventricular hypertrophy producing muscular narrowing and intracavitary gradients in 9 patients (74+/-42 mm Hg). Sarcomeric protein missense mutations known to cause other phenotypic expressions of HCM were present in 3 patients. Over 4.1+/-3.7 years of follow-up, 12 patients (43%) with left ventricular apical aneurysms experienced adverse disease complications (event rate, 10.5%/y), including sudden death, appropriate implantable cardioverter-defibrillator discharges, nonfatal thromboembolic stroke, and progressive heart failure and death. Patients with left ventricular apical aneurysms represent an underappreciated subset in the heterogeneous HCM disease spectrum with important clinical implications, often requiring a high index of suspicion and cardiovascular magnetic resonance for identification. Apical aneurysms in HCM are associated with substantial cardiovascular morbidity and mortality and raise novel treatment considerations.

Evaluation of the distortion rate of panoramic and peri apical radiographs in erupted third molar inclination

International Nuclear Information System (INIS)

Ezoddini Ardakani, F.; Zangouie Booshehri, M.; Behniafar, B.

2011-01-01

Panoramic and peri apical radiographs are normally used in impacted third molar teeth surgeries. The aim of the present study was to evaluate and compare the distortion of the erupted third molar teeth on panoramic and peri apical radiographs. Patients and Methods: A total of 44 radiographs were obtained of 22 patients (age range, 18-24 years) referred to the faculty of dentistry for orthodontic treatment. A plaster cast was prepared and panoramic radiography was taken for all patients to plan the orthodontic treatment and peri apical radiography was taken for investigation of tooth structure details. Therefore, a total of 66 views and samples were studied by two methods: 1) Measuring the angle between the longitudinal plane of the third molar and occlusal plane. 2) Measuring the angle between the longitudinal plane of second and third molar. Finally, 132 records were evaluated by one individual. Results: There was no significant statistical difference between the mean position of the third molar on panoramic, peri apical radiographs and the casts. However, measurements of the third molars on peri apical radiographs were slightly closer to the measurements of the casts compared to the panoramic radiographs. Conclusion: Distortion does not have a specific effect on the diagnosis of the position of the third erupted molars by peri apical or panoramic radiographs, though various studies have shown that these radiographs have an amount of distortion and peri apical radiographical distortion is less than that in panoramic radiography.

Blunt apical dissection during anatomic radical retropubic prostatectomy

Directory of Open Access Journals (Sweden)

Yacoub Saif

2009-02-01

Full Text Available Abstract Background Meticulous apical dissection during a radical prostatectomy is imperative to achieve desirable pathologic and quality of life outcomes. Findings We describe a novel technique using careful blunt dissection to better delineate the apex of the prostate, providing a simple means to potentially lessen positive surgical margins at the apex and promote better continence and erectile function in men undergoing an anatomic radical prostatectomy. Median operative time and blood loss were 190 minutes and 675 mL, respectively. Only 10 percent of the patients with positive surgical margins were found to have apical positive surgical margins. Ninety-three percent of patients reported no urinary leakage. Conclusion We believe our technique of isolating the DVC with blunt dissection and then ligating and transecting the DVC to be feasible approach that requires larger studies to truly confirm its utility.

Hypoxia modulates the differentiation potential of stem cells of the apical papilla.

Science.gov (United States)

Vanacker, Julie; Viswanath, Aiswarya; De Berdt, Pauline; Everard, Amandine; Cani, Patrice D; Bouzin, Caroline; Feron, Olivier; Diogenes, Anibal; Leprince, Julian G; des Rieux, Anne

2014-09-01

Stem cells from the apical papilla (SCAP) are a population of mesenchymal stem cells likely involved in regenerative endodontic procedures and have potential use as therapeutic agents in other tissues. In these situations, SCAP are exposed to hypoxic conditions either within a root canal devoid of an adequate blood supply or in a scaffold material immediately after implantation. However, the effect of hypoxia on SCAP proliferation and differentiation is largely unknown. Therefore, the objective of this study was to evaluate the effect of hypoxia on the fate of SCAP. SCAP were cultured under normoxia (21% O2) or hypoxia (1% O2) in basal or differentiation media. Cellular proliferation, gene expression, differentiation, and protein secretion were analyzed by live imaging, quantitative reverse-transcriptase polymerase chain reaction, cellular staining, and enzyme-linked immunosorbent assay, respectively. Hypoxia had no effect on SCAP proliferation, but it evoked the up-regulation of genes specific for osteogenic differentiation (runt-related transcription factor 2, alkaline phosphatase, and transforming growth factor-β1), neuronal differentiation ( 2'-3'-cyclic nucleotide 3' phosphodiesterase, SNAIL, neuronspecific enolase, glial cell-derived neurotrophic factor and neurotrophin 3), and angiogenesis (vascular endothelial growth factor A and B). Hypoxia also increased the sustained production of VEGFa by SCAP. Moreover, hypoxia augmented the neuronal differentiation of SCAP in the presence of differentiation exogenous factors as detected by the up-regulation of NSE, VEGFB, and GDNF and the expression of neuronal markers (PanF and NeuN). This study shows that hypoxia induces spontaneous differentiation of SCAP into osteogenic and neurogenic lineages while maintaining the release of the proangiogenic factor VEGFa. This highlights the potential of SCAP to promote pulp-dentin regeneration. Moreover, SCAP may represent potential therapeutic agents for neurodegenerative

Improved magnetoimpedance and mechanical properties on nanocrystallization of amorphous Fe{sub 68.5}Si{sub 18.5}Cu{sub 1}Nb{sub 3}B{sub 9} ribbons

Energy Technology Data Exchange (ETDEWEB)

Sahoo, Trilochan [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Proof and Experimental Establishment, Balasore 756025 (India); Majumdar, B. [Defence Metallurgical Research Laboratory, Hyderabad 500068 (India); Srinivas, V., E-mail: veeturi@iitm.ac.in [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India); Srinivas, M. [Defence Metallurgical Research Laboratory, Hyderabad 500068 (India); Nath, T.K. [Department of Physics and Meteorology, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Agarwal, G. [Department of Metallurgical Engineering, Banaras Hindu University, Varanasi 221005 (India)

2013-10-15

The effect of heat-treatment temperature on evolution of microstructures, mechanical and soft magnetic properties and magnetoimpedance (MI) effect in rapidly solidified Fe{sub 68.5}Si{sub 18.5}Cu{sub 1}Nb{sub 3}B{sub 9} ribbons, has been investigated. The as-quenched ribbons were subjected to heat-treatment at different temperatures between 400 and 600 °C for 1 h under high vacuum. Detailed structural studies on the ribbons heat-treated at and above 525 °C revealed the presence of nanocrystalline Fe{sub 3}Si phases embedded in a residual amorphous matrix. The ribbon heat-treated at 550 °C temperature exhibits maximum ductility, maximum relative permeability of 4.8×10{sup 4}, minimum coercivity of 0.1 Oe, and maximum MI value of 62%. The enhanced MI effect is believed to be related to the magnetic softening of 550 °C heat-treated ribbons. However, the magnetic properties and MI effect deteriorated in the samples heat-treated above 550 °C due to the coarsening of grain sizes. The soft magnetic behavior of the nanocrystalline ribbons are discussed in the light of random anisotropy model, whereas the MI effect is discussed through standard skin effect in electrodynamics. - Highlights: • Microstructure was tuned by controlled crystallization to obtain superior magnetic properties. • Improved MI in the heat-treated ribbons is attributed to the superior electromagnetic properties. • Correlation between MI and magnetic properties of nc-Fe{sub 68.5}Si{sub 18.5}Cu{sub 1}Nb{sub 3}B{sub 9} is established. • All the observed features are consistent with the proposed random anisotropy model.

A Ribbon-like Structure in the Ejective Organelle of the Green Microalga Pyramimonas parkeae (Prasinophyceae) Consists of Core Histones and Polymers Containing N-acetyl-glucosamine.

Science.gov (United States)

Yamagishi, Takahiro; Kurihara, Akira; Kawai, Hiroshi

2015-11-01

The green microalga, Pyramimonas parkeae (Prasinophyceae) has an ejective organelle containing a coiled ribbon structure resembling the ejectisome in Cryptophyta. This structure is discharged from the cell by a stimulus and extends to form a tube-like structure, but the molecular components of the structure have not been identified. Tricine-SDS-PAGE analysis indicated that the ribbon-like structure of P. parkeae contains some proteins and low molecular acidic polymers. Edman degradation, LC/MS/MS analyses and immunological studies demonstrated that their proteins are core histones (H3, H2A, H2B and H4). In addition, monosaccharide composition analysis of the ribbon-like structures and degradation by lysozyme strongly indicated that the ribbon-like structure consist of β (1-4) linked polymers containing N-acetyl-glucosamine. Purified polymers and recombinant histones formed glob-like or filamentous structures. Therefore we conclude that the ribbon-like structure of P. parkeae mainly consists of a complex of core histones (H3, H2A, H2B and H4) and polymers containing N-acetyl-glucosamine, and suggest to name the ejective organelle in P. parkeae the "histrosome" to distinguish it from the ejectisome in Cryptophyta. Copyright © 2015 Elsevier GmbH. All rights reserved.

Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study

Energy Technology Data Exchange (ETDEWEB)

Katakam, Shravana; Santhanakrishnan, S.; Smith, Casey; Banerjee, Rajarshi; Dahotre, Narendra B. [Laboratory of Laser Materials Processing and Synthesis Department of Materials Science and Engineering University of North Texas, Denton, Texas 76207 (United States); Devaraj, Arun; Bowden, Mark; Thevuthasan, Suntharampillai [William R. Wiley Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, Washington 99352 (United States); Ramanujan, R. V. [Schhol of Materials Science and Engineering Nanyang Technological University, Singapore 639798 (Singapore)

2013-11-14

This paper focuses on laser-based de-vitrification of amorphous soft magnetic Fe-Si-B ribbons and its consequent influence on the magnetic properties. Laser processing resulted in a finer scale of crystallites due to rapid heating and cooling during laser annealing compared to conventional furnace annealing process. A significant increase in saturation magnetization is observed for laser-annealed ribbons compared to both as-received and furnace annealed samples coupled with an increase in coercivity compared to the as received samples. The combined effect of thermal histories and stresses developed during laser annealing results in the formation of nano-crystalline phase along the laser track. The phase evolution is studied by micro-XRD and TEM analysis. Solute partitioning and compositional variation within the phases are obtained by Local Electrode Atom probe analysis. The evolution of microstructure is rationalized using a Finite Element based heat transfer multi-physics model.

In vitro comparison of apical microleakage following canal ...

African Journals Online (AJOL)

hope&shola

2010-11-03

Nov 3, 2010 ... The purpose of this study was to compare apical microleakage following canal obturation with lateral ..... heat-induced bone tissue injury: A vital microscopic study in the rabbit. J. Prosthet. ... In: Pathways of the Pulp. 9th Ed ...

Non-surgical retreatment of a failed apicoectomy without retrofilling using white mineral trioxide aggregate as an apical barrier.

Science.gov (United States)

Stefopoulos, Spyridon; Tzanetakis, Giorgos N; Kontakiotis, Evangelos G

2012-01-01

Root-end resected teeth with persistent apical periodontitis are usually retreated surgically or a combination of non-surgical and surgical retreatment is employed. However, patients are sometimes unwilling to be subjected to a second surgical procedure. The apical barrier technique that is used for apical closure of immature teeth with necrotic pulps may be an alternative to non-surgically retreat a failed apicoectomy. Mineral trioxide aggregate (MTA) has become the material of choice in such cases because of its excellent biocompatibility, sealing ability and osseoinductive properties. This case report describes the non-surgical retreatment of a failed apicoectomy with no attempt at retrofilling of a maxillary central incisor. White MTA was used to induce apical closure of the wide resected apical area. Four-year follow-up examination revealed an asymptomatic, fully functional tooth with a satisfactory healing of the apical lesion. White MTA apical barrier may constitute a reliable and efficient technique to non-surgically retreat teeth with failed root-end resection. The predictability of such a treatment is of great benefit for the patient who is unwilling to be submitted to a second surgical procedure.

Thermal, magnetic, and structural properties of soft magnetic FeCrNbCuSiB alloy ribbons

International Nuclear Information System (INIS)

Rosales-Rivera, A.; Valencia, V.H.; Quintero, D.L.; Pineda-Gomez, P.; Gomez, M.

2006-01-01

The thermal, magnetic and structural properties of amorphous magnetic Fe 73.5-x Cr x Nb 3 Cu 1 Si 13.5 B 9 alloy ribbons, with x=0, 2, 4, 6, 8, and 10, were studied by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), magneto-impedance measurements and X-ray diffraction (XRD). The ribbons exhibit ultrasoft magnetic behavior, especially giant magneto-impedance effect, GMI. A three-peak behavior was observed in GMI curves. Particular attention has been given to observation of crystallization kinetics via DSC and TGA. The primary crystallization T pcr , and Curie T c , temperatures were determined from DSC and TGA data, respectively. The effect of partial substitution of iron by Cr on the thermal and magnetic properties is discussed

Pathogenesis of apical periodontitis and the causes of endodontic failures.

Science.gov (United States)

Nair, P N R

2004-11-01

Apical periodontitis is a sequel to endodontic infection and manifests itself as the host defense response to microbial challenge emanating from the root canal system. It is viewed as a dynamic encounter between microbial factors and host defenses at the interface between infected radicular pulp and periodontal ligament that results in local inflammation, resorption of hard tissues, destruction of other periapical tissues, and eventual formation of various histopathological categories of apical periodontitis, commonly referred to as periapical lesions. The treatment of apical periodontitis, as a disease of root canal infection, consists of eradicating microbes or substantially reducing the microbial load from the root canal and preventing re-infection by orthograde root filling. The treatment has a remarkably high degree of success. Nevertheless, endodontic treatment can fail. Most failures occur when treatment procedures, mostly of a technical nature, have not reached a satisfactory standard for the control and elimination of infection. Even when the highest standards and the most careful procedures are followed, failures still occur. This is because there are root canal regions that cannot be cleaned and obturated with existing equipments, materials, and techniques, and thus, infection can persist. In very rare cases, there are also factors located within the inflamed periapical tissue that can interfere with post-treatment healing of the lesion. The data on the biological causes of endodontic failures are recent and scattered in various journals. This communication is meant to provide a comprehensive overview of the etio-pathogenesis of apical periodontitis and the causes of failed endodontic treatments that can be visualized in radiographs as asymptomatic post-treatment periapical radiolucencies.

Adenovirus entry from the apical surface of polarized epithelia is facilitated by the host innate immune response.

Directory of Open Access Journals (Sweden)

Poornima L N Kotha

2015-03-01

Full Text Available Prevention of viral-induced respiratory disease begins with an understanding of the factors that increase or decrease susceptibility to viral infection. The primary receptor for most adenoviruses is the coxsackievirus and adenovirus receptor (CAR, a cell-cell adhesion protein normally localized at the basolateral surface of polarized epithelia and involved in neutrophil transepithelial migration. Recently, an alternate isoform of CAR, CAREx8, has been identified at the apical surface of polarized airway epithelia and is implicated in viral infection from the apical surface. We hypothesized that the endogenous role of CAREx8 may be to facilitate host innate immunity. We show that IL-8, a proinflammatory cytokine and a neutrophil chemoattractant, stimulates the protein expression and apical localization of CAREx8 via activation of AKT/S6K and inhibition of GSK3β. Apical CAREx8 tethers infiltrating neutrophils at the apical surface of a polarized epithelium. Moreover, neutrophils present on the apical-epithelial surface enhance adenovirus entry into the epithelium. These findings suggest that adenovirus evolved to co-opt an innate immune response pathway that stimulates the expression of its primary receptor, apical CAREx8, to allow the initial infection the intact epithelium. In addition, CAREx8 is a new target for the development of novel therapeutics for both respiratory inflammatory disease and adenoviral infection.

Surface and bulk magnetic properties of as-quenched FeNbB ribbons

Czech Academy of Sciences Publication Activity Database

Životský, O.; Postava, K.; Kraus, Luděk; Juraszek, J.; Jirásková, Yvonna; Teillet, J.; Barčová, K.; Švec, P.; Janičkovič, D.; Pištora, J.

2008-01-01

Roč. 320, č. 8 (2008), s. 1535-1540 ISSN 0304-8853 R&D Projects: GA ČR GA202/05/2111; GA AV ČR KAN400100653 Institutional research plan: CEZ:AV0Z20410507; CEZ:AV0Z10100520 Keywords : Surface nanocrystallization * Fe-based ribbon * depth profile Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.283, year: 2008

Proliferative effects of apical, but not basal, matrix metalloproteinase-7 activity in polarized MDCK cells

International Nuclear Information System (INIS)

Harrell, Permila C.; McCawley, Lisa J.; Fingleton, Barbara; McIntyre, J. Oliver; Matrisian, Lynn M.

2005-01-01

Matrix metalloproteinase-7 (MMP-7) is primarily expressed in glandular epithelium. Therefore, its mechanism of action may be influenced by its regulated vectorial release to either the apical and/or basolateral compartments, where it would act on its various substrates. To gain a better understanding of where MMP-7 is released in polarized epithelium, we have analyzed its pattern of secretion in polarized MDCK cells expressing stably transfected human MMP-7 (MDCK-MMP-7), and HCA-7 and Caco2 human colon cancer cell lines. In all cell lines, latent MMP-7 was secreted to both cellular compartments, but was 1.5- to 3-fold more abundant in the basolateral compartment as compared to the apical. However, studies in the MDCK system demonstrated that MMP-7 activity was 2-fold greater in the apical compartment of MDCK-MMP-7 HIGH -polarized monolayers, which suggests the apical co-release of an MMP-7 activator. In functional assays, MMP-7 over-expression increased cell saturation density as a result of increased cell proliferation with no effect on apoptosis. Apical MMP-7 activity was shown to be responsible for the proliferative effect, which occurred, as demonstrated by media transfer experiments, through cleavage of an apical substrate and not through the generation of a soluble factor. Taken together, our findings demonstrate the importance of MMP-7 secretion in relation to its mechanism of action when expressed in a polarized epithelium

Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments

Directory of Open Access Journals (Sweden)

Taha Özyürek

2017-11-01

Full Text Available Objectives To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR, Mtwo-R, ProTaper Next (PTN, and Twisted File Adaptive (TFA systems. Materials and Methods The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU, Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with χ2 tests using SPSS 21.0 software. Results New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments.

Science.gov (United States)

Özyürek, Taha; Tek, Vildan; Yılmaz, Koray; Uslu, Gülşah

2017-11-01

To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with χ 2 tests using SPSS 21.0 software. New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

Research for Brazing Materials of High-Temperature Thermoelectric Modules with CoSb3 Thermoelectric Materials

Science.gov (United States)

Lee, Yu Seong; Kim, Suk Jun; Kim, Byeong Geun; Lee, Soonil; Seo, Won-Seon; Kim, Il-Ho; Choi, Soon-Mok

2017-05-01

Metallic glass (MG) can be a candidate for an alternative brazing material of high-temperature thermoelectric modules, since we can expect both a lower brazing temperature and a high operating temperature for the junction from the MG brazers. Another advantage of MG powders is their outstanding oxidation resistance, namely, high-temperature durability in atmosphere. We fabricated three compositions of Al-based MGs—Al-Y-Ni, Al-Y-Ni-Co, and Al-Y-Ni-Co-La—by using the melt spinning process, and their T gs were 273°C, 264°C, and 249°C, respectively. The electrical resistivity of the Al-Y-Ni MG ribbon dropped significantly after annealing at 300°C. The electrical resistivity of crystallized Al-Y-Ni reduced down to 0.03 mΩ cm, which is an order of magnitude lower than that of the amorphous one. After the MG ribbons were pulverized to sub-100 μm, the average particle size was about 400 μm.

75 FR 11908 - Narrow Woven Ribbons With Woven Selvedge From China and Taiwan

Science.gov (United States)

2010-03-12

...)] Narrow Woven Ribbons With Woven Selvedge From China and Taiwan AGENCY: United States International Trade...(b) of the Act (19 U.S.C. 1673d(b)) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United...

Role of apical oxygen in 2-1-4 electron-doped superconductors

Energy Technology Data Exchange (ETDEWEB)

Richard, P.; Riou, G.; Jandl, S.; Poirier, M.; Fournier, P.; Nekvasil, V.; Divis, M

2004-08-01

We report a crystal-field infrared transmission and Raman study of oxygenated and reduced Nd{sub 2-x}Ce{sub x}CuO{sub 4} single crystals. Some Nd{sup 3+} crystal-field absorption bands corresponding to rare-earth ions in non-regular sites are attributed to Nd{sup 3+} ions in the vicinity of apical oxygens. This is correlated with a study of the A{sup *} ({approx}580 cm{sup -1}) Raman local mode and with the transport properties of undoped materials. We show that the apical oxygen is not removed by the reduction.

Apical sorting of lysoGPI-anchored proteins occurs independent of association with detergent-resistant membranes but dependent on their N-glycosylation.

Science.gov (United States)

Castillon, Guillaume Alain; Michon, Laetitia; Watanabe, Reika

2013-06-01

Most glycosylphosphatidylinositol-anchored proteins (GPI-APs) are located at the apical surface of epithelial cells. The apical delivery of GPI-APs is believed to result from their association with lipid rafts. We find that overexpression of C-terminally tagged PGAP3 caused predominant production of lysoGPI-APs, an intermediate precursor in the GPI lipid remodeling process in Madin-Darby canine kidney cells. In these cells, produced lysoGPI-APs are not incorporated into detergent-resistant membranes (DRMs) but still are delivered apically, suggesting that GPI-AP association with DRMs is not necessary for apical targeting. In contrast, apical transport of both fully remodeled and lyso forms of GPI-APs is dependent on N-glycosylation, confirming a general role of N-glycans in apical protein transport. We also find that depletion of cholesterol causes apical-to-basolateral retargeting not only of fully remodeled GPI-APs, but also of lysoGPI-APs, as well as endogenous soluble and transmembrane proteins that would normally be targeted to the apical membrane. These findings confirm the essential role for cholesterol in the apical protein targeting and further demonstrate that the mechanism of cholesterol-dependent apical sorting is not related to DRM association of GPI-APs.

Prevalence and activity of Epstein-Barr virus and human cytomegalovirus in symptomatic and asymptomatic apical periodontitis lesions.

Science.gov (United States)

Hernádi, Katinka; Szalmás, Anita; Mogyorósi, Richárd; Czompa, Levente; Veress, György; Csoma, Eszter; Márton, Ildikó; Kónya, József

2010-09-01

Apical periodontitis is a polymicrobial inflammation with a dominant flora of opportunistic Gram-negative bacteria; however, a pathogenic role of human herpesviruses such as Epstein-Barr virus (EBV) and human cytomegalovirus (HCMV) has been implicated recently. The aims of this study were to determine the prevalence, activity, and disease association of EBV and HCMV in apical periodontitis in an Eastern Hungarian population. Forty samples with apical periodontitis (17 symptomatic and 23 asymptomatic) and 40 healthy pulp controls were collected. EBV and HCMV prevalences were measured by polymerase chain reaction (PCR) detection of the viral DNA and viral activity was tested by reverse-transcription PCR amplification of viral messenger RNA. EBV DNA and EBNA-2 messenger RNA were found in apical periodontitis lesions at significantly (p apical lesions (10%) and controls (0%). The presence of EBV DNA in apical lesions was associated significantly with large (> or = 5 mm) lesion size (p = 0.02) but not with symptoms (p = 0.30). Symptomatic manifestation was significantly associated with the co-occurrence (odds ratio [OR], 8.80; 95% confidence interval [CI], 1.69-45.76) but not the sole occurrences of EBNA-2 messenger RNA (OR, 2.29; 95% CI, 0.48-11.06) and large lesion size (OR, 4.02; 95% CI, 0.81-19.89). EBV infection is a frequent event in apical periodontitis, whereas the involvement of HCMV still remains to be elucidated. This study showed that symptomatic manifestation was likely to occur if a large-sized apical periodontitis lesion is aggravated with active EBV infection. Copyright 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

A Comparison of Apical Transportation in Severely Curved Canals Induced by Reciproc and BioRaCe Systems.

Science.gov (United States)

Nabavizadeh, Mohammadreza; Abbaszadegan, Abbas; Khojastepour, Leila; Amirhosseini, Mohsen; Kiani, Ebrahim

2014-01-01

Preserving the apical root structure during cleaning and shaping of the canal has always been a challenge in endodontics particularly when the root canals are curved. The purpose of this in vitro study was to compare the apical transportation induced by the Reciproc and BioRaCe rotary systems in preparing the mesiobuccal root canal of the human maxillary molars. The mesiobuccal canals of sixty extracted maxillary molars with curvature angle of 25˚-35˚ were selected and randomly assigned into two groups. Each canal was prepared by either Reciproc or BioRaCe rotary systems. A double-digital radiographic technique and AutoCAD software were used to compare the apical transportation at 0.5, 1, 2, 3, 4 and 5 mm distances from the working length (WL). The distance between the master apical rotary file and the initial K-file in the superimposed radiographs determined the amount of apical transportation. An independent t-test was used to compare the groups. The statistical significant level was set at 0.05. Apical transportation of the Reciproc group was significantly greater than the BioRaCe group in all distances (P<0.001). The maximum apical transportation occurred in the Reciproc group at 0.5 mm from the WL (0.048±0.0028 mm) and the minimum occurred for BioRaCe at 5 mm from the WL (0.010±0.0005 mm). The Reciproc system produced significantly more apical transportation than the BioRaCe, but this fact does not seem to negatively alter the clinical success or quality of root canal treatment.

Incidence of apical root cracks and apical dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths

NARCIS (Netherlands)

Liu, R.; Kaiwar, A.; Shemesh, H.; Wesselink, P.R.; Hou, B.; Wu, M.K.

2013-01-01

Introduction The aim of this study was to compare the incidence of apical root cracks and dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths. Methods Two hundred forty mandibular incisors were mounted in resin blocks with simulated

Responses of Metabolites in Soybean Shoot Apices to Changing Atmospheric Carbon Dioxide Concentrations

Directory of Open Access Journals (Sweden)

Richard Sicher

2012-01-01

Full Text Available Soybean seedlings were grown in controlled environment chambers with CO2 partial pressures of 38 (ambient and 72 (elevated Pa. Five or six shoot apices were harvested from individual 21- to 24-day-old plants. Metabolites were analyzed by gas chromatography and, out of 21 compounds, only sucrose and fructose increased in response to CO2 enrichment. One unidentified metabolite, Unk-21.03 decreased up to 80% in soybean apices in response to elevated CO2. Levels of Unk-21.03 decreased progressively when atmospheric CO2 partial pressures were increased from 26 to 100 Pa. Reciprocal transfer experiments showed that Unk-21.03, and sucrose in soybean apices were altered slowly over several days to changes in atmospheric CO2 partial pressures. The mass spectrum of Unk-21.03 indicated that this compound likely contained both an amino and carboxyl group and was structurally related to serine and aspartate. Our findings suggested that CO2 enrichment altered a small number of specific metabolites in soybean apices. This could be an important step in understanding how plant growth and development are affected by carbon dioxide enrichment.

Cone beam computed tomography study of apical root resorption induced by Herbst appliance

Science.gov (United States)

SCHWARTZ, João Paulo; RAVELI, Taísa Boamorte; ALMEIDA, Kélei Cristina de Mathias; SCHWARTZ-FILHO, Humberto Osvaldo; RAVELI, Dirceu Barnabé

2015-01-01

Objective This study evaluated the frequency of root resorption during the orthodontic treatment with Herbst appliance by Cone Beam Computed Tomography (CBCT). Material and Methods The sample comprised 23 patients (11 men, 12 women; mean ages 15.76±1.75 years) with Class II division 1 malocclusion, treated with Herbst appliance. CBCT was obtained before treatment (T0) and after Herbst treatment (T1). All the dental roots, except third molars, were evaluated, and apical root resorption was determined using the axial guided navigation method. Paired t-tests and Wilcoxon T Test were used to compare the dependent samples in parametric and nonparametric cases, respectively. Chi-Square Test with Yates’ correction was used to evaluate the relationship between apical root resorption and gender. Results were considered at a significance level of 5%. Results Apical resorption was detected by CBCT in 57.96% of 980 roots that underwent Herbst appliance treatment. All patients had minimal resorption and there was no statistical significance between the genders. Conclusion CBCT three-dimensional evaluation showed association between Herbst appliance and minimal apical root resorption, mostly in the anchoring teeth, without clinical significance. PMID:26537718

Pulp Revascularization on Permanent Teeth with Open Apices in a Middle-aged Patient.

Science.gov (United States)

Wang, Yu; Zhu, Xiaofei; Zhang, Chengfei

2015-09-01

Pulp revascularization is a promising procedure for the treatment of adolescents' immature permanent teeth with necrotic pulp and/or apical periodontitis. However, the ability to successfully perform pulp revascularization in a middle-aged patient remains unclear. A 39-year-old woman was referred for treatment of teeth #20 and #29 with necrotic pulp, extensive periapical radiolucencies, and incomplete apices. Pulp revascularization procedures were attempted, including root canal debridement, triple antibiotic paste medication, and platelet-rich plasma transplantation to act as a scaffold. Periapical radiographic and cone-beam computed tomographic examinations were used to review the changes in the apical lesions and root apex configuration. The patient remained asymptomatic throughout the 30-month follow-up. Periapical radiographic examination revealed no change in the apical lesions of either tooth at 8 months. The periapical radiolucency disappeared on tooth #20 and significantly decreased on tooth #29 by the 30-month follow-up, findings that were also confirmed by cone-beam computed tomographic imaging. No evidence of root lengthening or thickening was observed. Successful revascularization was achieved in a middle-aged patient's teeth. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Cone beam computed tomography study of apical root resorption induced by Herbst appliance

Directory of Open Access Journals (Sweden)

João Paulo SCHWARTZ

2015-10-01

Full Text Available Objective This study evaluated the frequency of root resorption during the orthodontic treatment with Herbst appliance by Cone Beam Computed Tomography (CBCT.Material and Methods The sample comprised 23 patients (11 men, 12 women; mean ages 15.76±1.75 years with Class II division 1 malocclusion, treated with Herbst appliance. CBCT was obtained before treatment (T0 and after Herbst treatment (T1. All the dental roots, except third molars, were evaluated, and apical root resorption was determined using the axial guided navigation method. Paired t-tests and Wilcoxon T Test were used to compare the dependent samples in parametric and nonparametric cases, respectively. Chi-Square Test with Yates’ correction was used to evaluate the relationship between apical root resorption and gender. Results were considered at a significance level of 5%.Results Apical resorption was detected by CBCT in 57.96% of 980 roots that underwent Herbst appliance treatment. All patients had minimal resorption and there was no statistical significance between the genders.Conclusion CBCT three-dimensional evaluation showed association between Herbst appliance and minimal apical root resorption, mostly in the anchoring teeth, without clinical significance.

Cytoplasmic Dynein Regulation by Subunit Heterogeneity and Its Role in Apical Transport

Science.gov (United States)

Tai, Andrew W.; Chuang, Jen-Zen; Sung, Ching-Hwa

2001-01-01

Despite the existence of multiple subunit isoforms for the microtubule motor cytoplasmic dynein, it has not yet been directly shown that dynein complexes with different compositions exhibit different properties. The 14-kD dynein light chain Tctex-1, but not its homologue RP3, binds directly to rhodopsin's cytoplasmic COOH-terminal tail, which encodes an apical targeting determinant in polarized epithelial Madin-Darby canine kidney (MDCK) cells. We demonstrate that Tctex-1 and RP3 compete for binding to dynein intermediate chain and that overexpressed RP3 displaces endogenous Tctex-1 from dynein complexes in MDCK cells. Furthermore, replacement of Tctex-1 by RP3 selectively disrupts the translocation of rhodopsin to the MDCK apical surface. These results directly show that cytoplasmic dynein function can be regulated by its subunit composition and that cytoplasmic dynein is essential for at least one mode of apical transport in polarized epithelia. PMID:11425878

Comparison of apical debris extrusion using a conventional and two rotary techniques.

Science.gov (United States)

Adl, Alireza; Sahebi, Safoora; Moazami, Fariborz; Niknam, Mahnaz

2009-01-01

Preparation techniques and instruments produce and push debris out of canals. This can induce inflammation within the periapical area. Therefore, instrumentation that causes less extrusion of debris is more desirable. The purpose of this in vitro study was to evaluate the quantity of debris extruded from the apical foramen during root canal preparation by using one hand, and two rotary instrumentation techniques. Three different groups each with 12 mesiobuccal roots of human maxillary first molar were instrumented using either step-back technique with hand instruments, FlexMaster or Mtwo rotary system. Debris extruded from the apical foramen during canal preparation was collected. The mean dry weights of debris were compared using one-way ANOVA. Step-back group had a significantly greater mean weight of debris compared to the other two groups (Pengine driven techniques were associated with less apical debris extrusion. [Iranian Endodontic Journal 2009;4(4):135-8].

Precipitate-induced R-phase in martensitic transformation of as-spun and annealed Ti51Ni49 ribbons

International Nuclear Information System (INIS)

Wu, Ling-Mei; Chang, Shih-Hang; Wu, Shyi-Kaan

2010-01-01

Differential scanning calorimetry (DSC) results indicate that a two-step B2 → R → B19' martensitic transformation and a one-step B19' → B2 transformation exhibit in as-spun and in 200-600 o C annealed Ti 51 Ni 49 ribbons. Guinier-Preston (GP) zones and Ti 2 Ni precipitates are formed in ribbons annealed at ≤300 o C and ≥400 o C, respectively, and a conspicuous increase of DSC transformation peak temperature occurs in between 300 o C and 400 o C. The sizes of GP zones and Ti 2 Ni precipitates increase with increased annealing temperature. Transmission electron microscope (TEM) observations show that GP zones can induce the R-phase and both of them are formed along B2 directions. DSC and TEM tests show that Ti 2 Ni precipitates can induce the R-phase more than GP zones and the induced R-phase plates are also found along B2 directions. Experimental results show that the growing direction of R-phase plates is strongly confined by that of GP zones and Ti 2 Ni precipitates. The length of R-phase plates can reach about 2 μm in 300 o C annealed ribbon.

Influence of cervical preflaring on apical file size determination.

Science.gov (United States)

Pecora, J D; Capelli, A; Guerisoli, D M Z; Spanó, J C E; Estrela, C

2005-07-01

To investigate the influence of cervical preflaring with different instruments (Gates-Glidden drills, Quantec Flare series instruments and LA Axxess burs) on the first file that binds at working length (WL) in maxillary central incisors. Forty human maxillary central incisors with complete root formation were used. After standard access cavities, a size 06 K-file was inserted into each canal until the apical foramen was reached. The WL was set 1 mm short of the apical foramen. Group 1 received the initial apical instrument without previous preflaring of the cervical and middle thirds of the root canal. Group 2 had the cervical and middle portion of the root canals enlarged with Gates-Glidden drills sizes 90, 110 and 130. Group 3 had the cervical and middle thirds of the root canals enlarged with nickel-titanium Quantec Flare series instruments. Titanium-nitrite treated, stainless steel LA Axxess burs were used for preflaring the cervical and middle portions of root canals from group 4. Each canal was sized using manual K-files, starting with size 08 files with passive movements until the WL was reached. File sizes were increased until a binding sensation was felt at the WL, and the instrument size was recorded for each tooth. The apical region was then observed under a stereoscopic magnifier, images were recorded digitally and the differences between root canal and maximum file diameters were evaluated for each sample. Significant differences were found between experimental groups regarding anatomical diameter at the WL and the first file to bind in the canal (P Flare instruments were ranked in an intermediary position, with no statistically significant differences between them (0.093 mm average). The instrument binding technique for determining anatomical diameter at WL is not precise. Preflaring of the cervical and middle thirds of the root canal improved anatomical diameter determination; the instrument used for preflaring played a major role in determining the

An Innovative Regenerative Endodontic Procedure Using Leukocyte and Platelet-rich Fibrin Associated with Apical Surgery: A Case Report.

Science.gov (United States)

Pinto, Nelson; Harnish, Alexandra; Cabrera, Carolina; Andrade, Catherine; Druttman, Tony; Brizuela, Claudia

2017-11-01

Regenerative endodontic procedures (REPs) associated with apical surgery could represent an alternative treatment strategy for patients whose teeth present incomplete root formation and extensive apical lesions. Leukocyte platelet-rich fibrin (L-PRF) has potential benefits in REPs; it could promote apical root formation and optimal bone healing. The aim of this case report was to describe innovative regenerative endodontic therapy using L-PRF in the root canal and an extensive apical lesion in an immature tooth with dens invaginatus and asymptomatic apical periodontitis. A healthy 20-year-old woman was referred to the dental clinic of the Universidad de Los Andes, Santiago, Chile, for endodontic treatment in tooth # 22 with incomplete root development and an extensive apical lesion. The diagnosis was asymptomatic apical periodontitis associated with dens invaginatus type II. The patient was treated with an innovative approach using L-PRF in REPs associated with apical surgery. Follow-ups were performed at 6 months and 1 year later. They included periapical radiographs, cone-beam computed tomographic imaging, sensitivity, and vitality tests. The clinical evaluations performed at 6 months and 1 year revealed an absence of symptoms. The radiographic evaluations showed that the apical lesion was resolved. The cone-beam images indicated that the root length increased and the walls had thickened. The sensitivity tests were positive, and the laser Doppler flowmetry showed positive blood flow after 1 year. The success of the results in this case report indicate that L-PRF can be used as a complement in apical surgery and REPs and could provide an innovative alternative treatment strategy for complex clinical cases like these. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Size and geometry of apical sesamoid fracture fragments as a determinant of prognosis in Thoroughbred racehorses.

Science.gov (United States)

Kamm, J L; Bramlage, L R; Schnabel, L V; Ruggles, A J; Embertson, R M; Hopper, S A

2011-07-01

Analysis was performed to examine a method for refining the preoperative prognosis for horses that had surgery to remove apical fractures of the proximal sesamoid bones (PSBs). To determine if: 1) there was a difference in size or configuration of apical fractures between the different anatomical locations of the PSBs, which have been shown to affect the prognosis; and 2) the size or configuration could predict the prognosis for racehorses with these fractures. The study included 110 weanlings and yearlings and 56 training racehorses that underwent surgery to remove apical PSB fractures. Radiographs of the fractures were used for measurement of the abaxial and axial proportion and the abaxial to axial ratio, and race records were used to determine average earnings per start (AEPS) and total post operative starts. Analysis of variance and regression statistics were used to compare the fragment sizes between the specific PSBs on each of the limbs and compare size and configuration of the fractures to prognosis. There was a significantly larger abaxial to axial ratio (more transverse fracture) for the forelimb medial sesamoids than for all other sesamoids in untrained racehorses (P = 0.03). There were no other significant differences in size. There was no relationship between fracture size or configuration and AEPS nor total post operative starts. Apical fractures in weanlings and yearlings tend to be more transverse in the forelimb medial PSBs than the other PSBs. Apical fracture size and geometry does not determine prognosis for apical sesamoid fractures. Horses that undergo surgery to remove larger apical fractures of the PSBs do not have a worse outcome than those horses with smaller fractures. © 2010 EVJ Ltd.

Experimental investigation on flow and heat transfer for cooling flush-mounted ribbons in a channel: Application of an EHD active enhancement method

Directory of Open Access Journals (Sweden)

Alami Nia Amin

2016-01-01

Full Text Available In the present study, the heat transfer enhancement of a bundle of flush-mounted ribbons placed on the floor of a rectangular duct was investigated experimentally. The flush-mounted ribbons act as heat sources and the cooling happens with air. The air flow was two-dimensional, steady, viscous and incompressible under either laminar (500 ≤ ReDh < 2000 and turbulent (2000 ≤ Re Dh ≤ 4500 conditions. The hydrodynamics and heat transfer behavior of the air flow was studied by means of an active method with application of corona wind. The state of the art of this work revolves around an experimental investigation of an EHD1 active method and heat transfer enhancement from the surfaces of the flush- mounted ribbons. Due to the intricacies of the required experiment, a special apparatus needed to be designed and constructed.

Effects of loxoprofen on the apical root resorption during orthodontic tooth movement in rats.

Science.gov (United States)

Yamamoto, Taeko; Kaku, Masato; Sumi, Hiromi; Yashima, Yuka; Izumino, Jin; Tanimoto, Kotaro

2018-01-01

Studies have revealed that severe apical root resorption during tooth movement is caused by the noninfective inflammatory reaction of apical root tissues. We hypothesized that loxoprofen can suppress apical root resorption during tooth movement. Cyclic tensile force (CTF) of 10 kPa was applied to the human pulp cells for 48 hours by the Flexcell Strain Unit. Loxoprofen (10 and 100 μM) was added to the culture cells, and expression of cyclooxygenase (COX)-1, COX-2, interleukin (IL)-1β, receptor activator of nuclear factor kappa-B ligand (RANKL), tumor necrosis factor (TNF)-α, and macrophage colony-stimulating factor (M-CSF) were examined. To determine the effects of loxoprofen sodium on apical root reabsorption during tooth movement, the upper first molars of 7-week-old rats were subjected to mesial movement by 10g force for 30 days with or without the oral administration of loxoprofen. Gene expression and protein concentration of COX-1, COX-2, IL-1β, TNF-α, RANKL and M-CSF were significantly higher in the CTF group than in the control group. However, these levels were decreased by loxoprofen administration. After orthodontic tooth movement, the expression of IL-1β, TNF-α, RANKL and M-CSF decreased in the loxoprofen group than in the control group by immunohistochemical staining. In comparison to control group, less number of odontoclasts and a decrease in the amount of apical root resorption was observed in the loxoprofen group. Many osteoclasts became visible on the pressure side of the alveolar bone in the both groups, and the amount of tooth movement did not show a significant difference. These findings demonstrate that severe apical root resorption may be suppressed by loxoprofen administration, without a disturbance of tooth movement.

An unusual ST-segment elevation: apical hypertrophic cardiomyopathy shows the ace up its sleeve.

Science.gov (United States)

de Santis, Francesco; Pergolini, Amedeo; Zampi, Giordano; Pero, Gaetano; Pino, Paolo Giuseppe; Minardi, Giovanni

2013-01-01

Apical hypertrophic cardiomyopathy is part of the broad clinical and morphologic spectrum of hypertrophic cardiomyopathy. We report a patient with electrocardiographic abnormalities in whom acute coronary syndrome was excluded and apical hypertrophic cardiomyopathy was demonstrated by careful differential diagnosis. Copyright © 2012 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

Hormonal networks involved in apical hook development in darkness and their response to light

Directory of Open Access Journals (Sweden)

Maria Agustina Mazzella

2014-02-01

Full Text Available In darkness, the dicot seedlings produces an apical hook as result of differential cell division and extension at opposite sides of the hypocotyl. This hook protects the apical meristem from mechanical damage during seedling emergence from the soil. In darkness, gibberellins act via the DELLA-PIF (PHYTOCHROME INTERACTING FACTORs pathway, and ethylene acts via the EIN3/EIL1 (ETHYLENE INSENSITIE 3/EIN3 like 1-HLS1 (HOOKLESS 1 pathway to control the asymmetric accumulation of auxin required for apical hook formation and maintenance. These core pathways form a network with multiple points of connection. Light perception by phytochromes and cryptochromes reduces the activity of PIFs and CONSTITUTIVE PHOTOMORPHOGENIC 1 (COP1 --both required for hook formation in darkness--, lowers the levels of gibberellins, and triggers hook opening as a component of the switch between heterotrophic and photoautotrophic development. Apical hook opening is thus a suitable model to study the convergence of endogenous and exogenous signals on the control of cell division and cell growth.

An investigation on the effects of resection angle on apical sea!

Directory of Open Access Journals (Sweden)

Razmi H

2003-08-01

Full Text Available Statement of Problem: The goal of a successful endodontic surgery is to establish an adequate seal in apical region. Therefore during surgery, root-end resection is essential for an appropriate situation and proper access."nPurpose: The aim of this study was to determine the most appropriate root-end resection angle to establish adequate apical seal in periapical surgery,"nMaterials and Methods: Forty-five intact extracted human maxillary central incisors were randomly divided into three 15-tooth groups. The root canals were instrumented and then obturated using lateral condensation technique. AM roots were resected at 3mm from apical portion. Angles of root resection for each group were 0, 30 and 45 degrees. Then all teeth surfaces, except the cut ones, were covered with nail polish and immersed in methylen blue for 7 days. After 7 days, nail polish was removed from the surfaces and samples were split in buccolingual direction. Then, dye penetration (mm was measured using a stereozoom microscope (Loupe [X4 magnification] and eye lens. In order to analyze the data, unilateral variance analysis was used."nResults: The values of dye penetration were: 7.23±3.34 (0°, 8.46±3.01(30° and 9.74±4.11 (45°. There"nwas no significant difference between three groups (P>0.05. Conclusion: It is suggested that the angle of root-end resection put a limited effect on apical seal if retrograde cavity depth is increased.

75 FR 53711 - Narrow Woven Ribbons With Woven Selvedge From China and Taiwan

Science.gov (United States)

2010-09-01

... Woven Ribbons With Woven Selvedge From China and Taiwan Determinations On the basis of the record \\1... U.S.C. 1673d(b)) (the Act), that an industry in the United States is threatened with material injury... (19 U.S.C. 1673d(b)), that an industry in the United States is threatened with material injury by...

Apical extrusion of debris: a literature review of an inherent occurrence during root canal treatment.

Science.gov (United States)

Tanalp, J; Güngör, T

2014-03-01

Extrusion of intracanal debris as well as irrigants is a common occurrence during root canal treatment, and no instrument or technique has thoroughly solved this problem. Because flare-ups may arise with any irritation directed towards periapical tissues, a shaping or irrigation technique should minimize the risk of apical extrusion, even though it may not be prevented. There has been a rapid evolution of root canal instruments and irrigation systems through the last decade, and many have been assessed for their debris extrusion potential. The purpose of this review was to identify publications regarding the evaluation of debris, bacteria and irrigant extrusion during root canal treatment. A PubMed, Ovid and MEDLINE search was conducted using the keywords "apical extrusion", "debris extrusion" and "endodontic treatment". The literature search extended over a period of more than 30 years up to 2012. Content of the review was limited to apical extrusion of debris and irrigants, extrusion of liquid by irrigation methods and bacterial extrusion. Issues relevant to apical extrusion were obtained by further search in the reference sections of the retrieved articles. The review provides an update on the current status of apical extrusion. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

A new ribbon-ignition method for fabricating p-CuO/n-CeO{sub 2} heterojunction with enhanced photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Wang, Ning [School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189 (China); Pan, Ye, E-mail: panye@seu.edu.cn [School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189 (China); Lu, Tao; Li, Xingzhou; Wu, Shikai [School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189 (China); Wu, Jili [School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009 (China)

2017-05-01

Highlights: • A novel ribbon-ignition method was carried out to fabricate p-CuO/n-CeO{sub 2} heterojunction. • Cu-Ce binary amorphous ribbons are chosen as precursors. • Ribbon-ignition method has many advantages compared to traditional solution-based methods. • The CuO/CeO{sub 2} exhibited enhanced photodegradation activity towards RhB. • The formation of p-type CuO/n-type CeO{sub 2} heterojunction can promote the separation and transfer of the photoinduced carriers, resulting in the enhanced photocatalytic activity. - Abstract: The p-type CuO/n-type CeO{sub 2} heterojunction photocatalyst was synthesized by a facile combination of ribbon-ignition and calcination methods using Cu-Ce amorphous ribbons as precursors. The synthesized sample was characterized by X-ray diffraction (XRD), fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–vis diffuse reflectance spectroscopy (DRS). XRD, FTIR and XPS reveal the successful synthesis of CuO/CeO{sub 2} composite. The SEM and TEM images show that the sample consists of large amounts of well-dispersed blocky-shaped particles with the size distribution from 20 nm to 2 μm. DRS exhibits the absorption band (about 491 nm) and the band gap energy (2.59 eV) of the CuO/CeO{sub 2} composite. The photocatalytic activities of the samples were evaluated by degrading rhodamine B (RhB) dye (10 mg/L) under visible light (λ > 420 nm) irradiation. Compared with pure CuO and CeO{sub 2}, the CuO/CeO{sub 2} exhibited significantly enhanced photocatalytic degradation activity. The reaction rate constant of CuO/CeO{sub 2} is 0.18 min{sup −1}, which is much higher than those of CuO (0.12 min{sup −1}) and CeO{sub 2} (0.10 min{sup −1}).

The Effect of Canal Contamination with Saliva on Apical Sealing

Directory of Open Access Journals (Sweden)

S Sabaghi

2014-08-01

Full Text Available Introduction: Root canal obturation aims at sealing the root canal system to prevent re-contamination of canal and periapical space. Presence of moisture in canal before obturation may posit a negative effect on the quality of canal sealing. Therefore, this study was conducted to investigate the effect of canal contamination with saliva on apical microleakage. Methods: In this laboratory study, 58 human uni-root teeth were cleaned and shaped for obturation with gutta percha and sealer AH26. In the case group, specimens were contaminated with human saliva immediately before obturation, whereas the teeth in the control group were kept dry. All canals were filled by lateral condensation technique. Moreover, the teeth were placed in methylene blue dye for 3 days. Dye penetration was measured using a stereomicrosope. As a matter of fact, the study data were analyzed via utilizing t-test. Results: A significant difference was found between the two groups in regard with the apical leakage(P<0.001. The microleakage mean of dye in the dry group was 3/48mm, whereas it was 6/36mm in the saliva contaminated group. Conclusion: The study findings revealed that complete drying of canal can improve apical sealing.

Apical dominance and growth in vitro of Alstroemeria

NARCIS (Netherlands)

Pumisutapon, P.

2012-01-01

In Alstroemeria, micropropagation is achieved by axillary bud outgrowth. However, the multiplication rate is rather low (1.2–2.0 per cycle of 4 weeks) due to strong apical dominance. Even though several factors (i.e. culture media, growth regulators, and environmental conditions) have

Effect of Al substitution for B on magnetic and structural properties of Co-based melt-spun ribbons

International Nuclear Information System (INIS)

Sepehri Amin, H.; Gholamipour, R.; Shahri, F.; Mohammadi, A.

2008-01-01

This paper reports structural and magnetic properties of rapidly quenched Co 64 Fe 4 Ni 2 B 19-x Si 8 Cr 3 Al x (x=0, 1, 2, 3) amorphous ribbons prepared by the single roller melt spinning process. Thermal analysis of the ribbons shows that the replacement of B by Al causes a decrease in the crystallization temperature. Structural studies of the samples have been carried out by transmission electron microscopy and X-ray diffraction. With optimum amount of Al in the alloy, the as-cast material has better soft magnetic properties. The highest maximum permeability (3.55x10 5 ), saturation magnetization (523.7 mT) and the lowest coercivity (0.8174 A/m) were obtained in the sample with x=2

USAGE OF PASTE FOR TEMPORARY PLACEMENT IN THE TREATMENT OF CHRONIC APICAL PERIODONTITIS

Directory of Open Access Journals (Sweden)

A.V. Borysenko

2012-03-01

Full Text Available Summary: The aim of the present investigation was usage of medicamental paste with antibacterial and regeneration action for temporary placement in the treatment of chronic apical periodontitis. Materials and method: The medicamental paste for temporary placement of root canals consists of a mixture of metronidazole, Enterosgel (Silm and Alflutop (Biotehnos S.A., Romania. Thë paste was used for the treatment of 30 teeth with chronic apical periodontitis. Final obturation of the root canals was performed with gutta percha cones and sealer. The efficiency of the treatment was appreciated after examination on the basis of clinical and radiographic findings. Results: During the treatment of the 30 teeth, no exacerbations of the pathological process were recorded. Pain after obturation of the root canals was revealed in only 6 (20% of the treated teeth. No pain, pathologic changes of gingiva, good mastication efficiency in all teeth after treatment were revealed. Conclusions: The high clinical efficiency of the medicamental paste with antibacterial and regeneration action at the level of temporary root canals placement in the treatment of chronic apical periodontitis was shown. Keywords: chronic apical periodontitis, medicamental paste for temporary root canals placement, metronidazole, Enterosgel (Silm and Alflutop (Biotehnos S.A., Romania

Experimental investigation on flow and heat transfer for cooling flush-mounted ribbons in a channel: Application of an EHD active enhancement method

OpenAIRE

Alami Nia Amin; Campo Antonio

2016-01-01

In the present study, the heat transfer enhancement of a bundle of flush-mounted ribbons placed on the floor of a rectangular duct was investigated experimentally. The flush-mounted ribbons act as heat sources and the cooling happens with air. The air flow was two-dimensional, steady, viscous and incompressible under either laminar (500 ≤ ReDh < 2000) and turbulent (2000 ≤ Re Dh ≤ 4500) conditions. The hydrodynamics and heat transfer behavior of the air flo...

Small Scales Structure of MHD Turbulence, Tubes or Ribbons?

Science.gov (United States)

Verdini, A.; Grappin, R.; Alexandrova, O.; Lion, S.

2017-12-01

Observations in the solar wind indicate that turbulent eddies change their anisotropy with scales [1]. At large scales eddies are elongated in direction perpendicular to the mean-field axis. This is the result of solar wind expansion that affects both the anisotropy and single-spacecraft measurments [2,3]. At small scales one recovers the anisotropy expected in strong MHD turbulence and constrained by the so-called critical balance: eddies are elongated along the mean-field axis. However, the actual eddy shape is intermediate between tubes and ribbons, preventing us to discriminate between two concurrent theories that predict 2D axysimmetric anisotropy [4] or full 3D anisotropy [5]. We analyse 10 years of WIND data and apply a numerically-derived criterion to select intervals in which solar wind expansion is expected to be negligible. By computing the anisotropy of structure functions with respect to the local mean field we obtain for the first time scaling relations that are in agreement with full 3D anisotropy, i.e. ribbons-like structures. However, we cannot obtain the expected scaling relations for the alignment angle which, according to the theory, is physically responsible for the departure from axisymmetry. In addition, a further change of anisotropy occurs well above the proton scales. We discuss the implication of our findings and how numerical simulations can help interpreting the observed spectral anisotropy. [1] Chen et al., ApJ, 768:120, 2012 [2] Verdini & Grappin, ApJL, 808:L34, 2015 [3] Vech & Chen, ApJL, 832:L16, 2016 [4] Goldreich & Shridar, ApJ, 438:763, 1995 [5] Boldyrev, ApJL, 626:L37, 2005

Detection of zinc translocation into apical dendrite of CA1 pyramidal neuron after electrical stimulation.

Science.gov (United States)

Suh, Sang Won

2009-02-15

Translocation of the endogenous cation zinc from presynaptic terminals to postsynaptic neurons after brain insult has been implicated as a potential neurotoxic event. Several studies have previously demonstrated that a brief electrical stimulation is sufficient to induce the translocation of zinc from presynaptic vesicles into the cytoplasm (soma) of postsynaptic neurons. In the present work I have extended those findings in three ways: (i) providing evidence that zinc translocation occurs into apical dendrites, (ii) presenting data that there is an apparent translocation into apical dendrites when only a zinc-containing synaptic input is stimulated, and (iii) presenting data that there is no zinc translocation into apical dendrite of ZnT3 KO mice following electrical stimulation. Hippocampal slices were preloaded with the "trappable" zinc fluorescent probe, Newport Green. After washout, a single apical dendrite in the stratum radiatum of hippocampal CA1 area was selected and focused on. Burst stimulation (100Hz, 500microA, 0.2ms, monopolar) was delivered to either the adjacent Schaffer-collateral inputs (zinc-containing) or to the adjacent temporo-ammonic inputs (zinc-free) to the CA1 dendrites. Stimulation of the Schaffer collaterals increased the dendritic fluorescence, which was blocked by TTX, low-Ca medium, or the extracellular zinc chelator, CaEDTA. Stimulation of the temporo-ammonic pathway caused no significant rise in the fluorescence. Genetic depletion of vesicular zinc by ZnT3 KO showed no stimulation-induced apical dendrite zinc rise. The present study provides evidence that synaptically released zinc translocates into postsynaptic neurons through the apical dendrites of CA1 pyramidal neurons during physiological synaptic activity.

Critical Height of the Torus Instability in Two-ribbon Solar Flares

Energy Technology Data Exchange (ETDEWEB)

Wang, Dong; Liu, Rui; Wang, Yuming; Liu, Kai; Chen, Jun; Liu, Jiajia; Zhou, Zhenjun [CAS Key Laboratory of Geospace Environment, Department of Geophysics and Planetary Sciences, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Min, E-mail: rliu@ustc.edu.cn [Department of Mathematics and Physics, Anhui Jianzhu University, Hefei 230601 (China)

2017-07-01

We studied the background field for 60 two-ribbon flares of M-and-above classes during 2011–2015. These flares are categorized into two groups, i.e., eruptive and confined flares, based on whether a flare is associated with a coronal mass ejection or not. The background field of source active regions is approximated by a potential field extrapolated from the B {sub z} component of vector magnetograms provided by the Helioseismic and Magnetic Imager. We calculated the decay index n of the background field above the flaring polarity inversion line, and defined a critical height h {sub crit} corresponding to the theoretical threshold ( n {sub crit} = 1.5) of the torus instability. We found that h {sub crit} is approximately half of the distance between the centroids of opposite polarities in active regions and that the distribution of h {sub crit} is bimodal: it is significantly higher for confined flares than for eruptive ones. The decay index increases monotonously with increasing height for 86% (84%) of the eruptive (confined) flares but displays a saddle-like profile for the rest, 14% (16%), which are found exclusively in active regions of multipolar field configuration. Moreover, n at the saddle bottom is significantly smaller in confined flares than that in eruptive ones. These results highlight the critical role of background field in regulating the eruptive behavior of two-ribbon flares.

Evaluation of the amount of apically extruded debris during ...

African Journals Online (AJOL)

2015-04-06

Apr 6, 2015 ... Objective: To evaluate the amount of apically extruded debris during retreatment (with or without solvent) of root canals filled by two ... These filling materials can be used with several obturation .... The tip of the master cone.

The symplectic fermion ribbon quasi-Hopf algebra and the SL(2,Z)-action on its centre

Energy Technology Data Exchange (ETDEWEB)

Farsad, Vanda

2017-06-14

This thesis is concerned with ''N pairs of symplectic fermions'' which are examples of logarithmic conformal field theories in two dimensions. The mathematical language of two-dimensional conformal field theories (on Riemannian surfaces of genus zero) are vertex operator algebras. The representation category of the even part of the symplectic fermion vertex operator super-algebra Rep V{sub ev} is conjecturally a factorisable finite ribbon tensor category. This determines an isomorphism of projective representations between two SL(2,Z)-actions associated to V{sub ev}. The first action is obtained by modular transformations on the space of so-called pseudo-trace functions of a vertex operator algebra. For V{sub ev} this was developed by A.M.Gaberdiel and I. Runkel. For the action one uses that Rep V{sub ev} is conjecturally a factorisable finite ribbon tensor category and thus carries a projective SL(2,Z)-action on a certain Hom-space [Ly1,Ly2,KL]. To do so we calculate the SL(2,Z)-action on the representation category of a general factorisable quasi-Hopf algebras. Then we show that Rep V{sub ev} is conjecturally ribbon equivalent to Rep Q, for Q a factorisable quasi-Hopf algebra, and calculate the SL(2,Z)-action explicitly on Rep Q. The result is that the two SL(2,Z)-action indeed agree. This poses the first example of such comparison for logarithmic conformal field theories.

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars.

Science.gov (United States)

Abarca, J; Zaror, C; Monardes, H; Hermosilla, V; Muñoz, C; Cantin, M

2014-06-01

Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3-5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24-0.33 mm in maxillary first molars and between 0.25-0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully.

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars

Science.gov (United States)

Abarca, J.; Zaror, C.; Monardes, H.; Hermosilla, V.; Muñoz, C.; Cantin, M.

2015-01-01

SUMMARY Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3–5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24–0.33 mm in maxillary first molars and between 0.25–0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully. PMID:25937698

Expression of Podoplanin in the Mouse Tooth Germ and Apical Bud Cells

Science.gov (United States)

Sawa, Yoshihiko; Iwasawa, Kana; Ishikawa, Hiroyuki

2008-01-01

This study was designed to investigate the distribution of cells expressing podoplanin in the mouse tooth bud. Podoplanin expression was detected in enamel epithelia of the cervical loop at cell-cell contacts strongly, and weakly on the loosely aggregated stellate reticulum in the center and the neighboring stratum intermedium. Odontoblasts exhibited intense podoplanin expression at the junction with predentin while no expression was detected in the enamel organ containing ameloblasts. These results suggest that proliferating inner and outer enamel epithelia express podoplanin but that the expression is suppressed in the differentiated epithelia containing ameloblasts. On the other hand the podoplanin expression occurs in the differentiating odontoblasts and the expression is sustained in differentiated odontoblasts, indicating that odontoblasts have the strong ability to express podoplanin. In cultured apical bud cells podoplanin was detected at cell-cell contacts. In real-time PCR analysis the amount of podoplanin mRNA of the apical buds was 2-fold compared with the amount of kidney used as a positive control. These findings indicate that apical bud cells have the strong ability to express the podoplanin gene. Podoplanin is a mucin-type glycoprotein negatively charged by extensive O-glycosylation and a high content of sialic acid, which expresses the adhesive property. The podoplanin may contribute to form odontoblastic fiber or function as the anchorage to the tooth development and in proliferating epithelial cells of cervical loop and apical bud. PMID:18989465

Histobacteriologic Conditions of the Apical Root Canal System and Periapical Tissues in Teeth Associated with Sinus Tracts.

Science.gov (United States)

Ricucci, Domenico; Loghin, Simona; Gonçalves, Lucio S; Rôças, Isabela N; Siqueira, José F

2018-03-01

This histobacteriologic study described the pattern of intraradicular and extraradicular infections in teeth with sinus tracts and chronic apical abscesses. The material comprised biopsy specimens from 24 (8 untreated and 16 treated) roots of teeth associated with apical periodontitis and a sinus tract. Specimens were obtained by periradicular surgery or extraction and were processed for histobacteriologic and histopathologic methods. Bacteria were found in the apical root canal system of all specimens, in the main root canal (22 teeth) and within ramifications (17 teeth). Four cases showed no extraradicular infection. Extraradicular bacteria occurred as a biofilm attached to the outer root surface in 17 teeth (5 untreated and 12 treated teeth), as actinomycotic colonies in 2 lesions, and as planktonic cells in 2 lesions. Extraradicular calculus formation (mineralized biofilm) was evident in 10 teeth. Teeth with chronic apical abscesses and sinus tracts showed a very complex infectious pattern in the apical root canal system and periapical lesion, with a predominance of biofilms. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Effect of precipitation on the shape memory effect of Ti50Ni25Cu25 melt-spun ribbon

International Nuclear Information System (INIS)

Tong Yunxiang; Liu Yong; Xie Zeliang; Zarinejad, Mehrdad

2008-01-01

The present research aims to provide accurate understanding of the relation between precipitation (volume fraction, morphology, type) and shape memory effect of Ti 50 Ni 25 Cu 25 melt-spun ribbon. Rapid thermal annealing was used to control the microstructural development while the shape memory effect of the ribbon was determined under constraint thermal cycling. The results show that the precipitation process takes the following sequence: B11 TiCu → B11 TiCu + Ti 2 (Ni, Cu) → Ti 2 (Ni, Cu) with increasing annealing temperature or duration. The shape memory effect is found to depend on both the volume fraction and the distribution of the precipitates. The former affects the shape recovery strain through reduction of the transformation volume participating the shape recovery. The latter affects the shape recovery strain through strengthening the matrix thus reducing the martensite strain which is more predominant under low constraint stresses. Precipitation strengthening, on the other hand, reduces the tendency of dislocation generation/movement, thus reducing the irreversible strain and improving shape recovery strain. This understanding provides guidelines on the optimization of the shape memory properties of the Ti 50 Ni 25 Cu 25 melt-spun ribbon via post-processing annealing

Functional characterization of apical transporters expressed in rat proximal tubular cells (PTCs) in primary culture.

Science.gov (United States)

Nakanishi, Takeo; Fukushi, Akimasa; Sato, Masanobu; Yoshifuji, Mayuko; Gose, Tomoka; Shirasaka, Yoshiyuki; Ohe, Kazuyo; Kobayashi, Masato; Kawai, Keiichi; Tamai, Ikumi

2011-12-05

Since in vitro cell culture models often show altered apical transporter expression, they are not necessarily suitable for the analysis of renal transport processes. Therefore, we aimed here to investigate the usefulness of primary-cultured rat proximal tubular cells (PTCs) for this purpose. After isolation of renal cortical cells from rat kidneys, PTCs were enriched and the gene expression and function of apical transporters were analyzed by means of microarray, RT-PCR and uptake experiments. RT-PCR confirmed that the major apical transporters were expressed in rat PTCs. Na(+)-dependent uptake of α-methyl-d-glucopyranoside (αMG), ergothioneine and carnitine by the PTCs suggests functional expression of Sglts, Octn1 and Octn2, respectively. Inhibition of pH-dependent glycylsarcosine uptake by low concentration of cephalexin, which is a β-lactam antibiotics recognized by Pepts, indicates a predominant role of high affinity type Pept2, but not low affinity type Pept1, in the PTCs. Moreover, the permeability ratio of [(14)C]αMG (apical to basolateral/basolateral to apical) across PTCs was 4.3, suggesting that Sglt-mediated reabsorptive transport is characterized. In conclusion, our results indicate that rat PTCs in primary culture are found to be a promising in vitro model to evaluate reabsorption processes mediated at least by Sglts, Pept2, Octn1 and Octn2.

Synthesis and magnetic properties of a new borophosphate SrCo2BPO7 with a four-column ribbon structure.

Science.gov (United States)

Gou, Wenbin; He, Zhangzhen; Yang, Ming; Zhang, Weilong; Cheng, Wendan

2013-03-04

A new borophosphate SrCo2BPO7 is synthesized by a conventional high-temperature solid-state reaction. The titled compound is found to crystallize in monoclinic system with space group P21/c, which displays a distorted four-column ribbon structure. Both BO3 triangles and PO4 tetrahedra are isolated, while irregular triangles built by Co(2+) ions are found to exist between the connecting ribbons. Magnetic behaviors are investigated by means of susceptibility, magnetization, and heat capacity measurements. The results confirm that SrCo2BPO7 possesses a three-dimensional antiferromagnetic ordering at 25 K. The possible spin arrangements in the system are also suggested.

Effect of Maintaining Apical Patency on Irrigant Penetration into the Apical Two Millimeters of Large Root Canals : An In Vivo Study

NARCIS (Netherlands)

Vera, Jorge; Hernandez, Erick M.; Romero, Monica; Arias, Ana; van der Sluis, Lucas W. M.

2012-01-01

Introduction: Factors such as complex root canal anatomy and the vapor lock phenomenon have been shown to limit the penetration of irrigating solutions into the apical third in both in vivo and in vitro studies involving small and wide canals. Hence, the aim of this study was to determine whether

78 FR 29703 - Narrow Woven Ribbons With Woven Selvedge From Taiwan: Preliminary Results of Antidumping Duty...

Science.gov (United States)

2013-05-21

... DEPARTMENT OF COMMERCE International Trade Administration [A-583-844] Narrow Woven Ribbons With... AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The..., International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW...

Gradenigo's Syndrome in a Patient with Chronic Suppurative Otitis Media, Petrous Apicitis, and Meningitis.

Science.gov (United States)

Taklalsingh, Nicholas; Falcone, Franco; Velayudhan, Vinodkumar

2017-09-28

BACKGROUND Gradenigo's syndrome includes the triad of suppurative otitis media, ipsilateral sixth (abducens) cranial nerve palsy and facial pain in the distribution of the fifth (trigeminal) cranial nerve. Gradenigo's syndrome is rare, and the diagnosis is easily overlooked. This case is the first to report Gradenigo's syndrome presenting with meningitis on a background of chronic suppurative otitis media (CSOM) and petrous apicitis (apical petrositis). CASE REPORT A 58-year-old male African American presented with headaches and confusion. Magnetic resonance imaging (MRI) of the head showed petrous apicitis with mastoiditis and abscess formation in the cerebellomedullary cistern (cisterna magna). The case was complicated by the development of palsy of the fourth (trochlear) cranial nerve, fifth (trigeminal) cranial nerve, and sixth (abducens) cranial nerve, with radiological changes indicating infection involving the seventh (facial) cranial nerve, and eighth (vestibulocochlear) cranial nerve. Cerebrospinal fluid (CSF) culture results were positive for Klebsiella pneumoniae, sensitive to ceftriaxone. The patient improved with surgery that included a left mastoidectomy and debridement of the petrous apex, followed by a ten-week course of antibiotics. Follow-up MRI showed resolution of the infection. CONCLUSIONS This report is of an atypical case of Gradenigo's syndrome. It is important to recognize that the classical triad of Gradenigo's syndrome, suppurative otitis media, ipsilateral sixth (abducens) cranial nerve palsy and facial pain in the distribution of the fifth (trigeminal) cranial nerve, may also involve chronic suppurative otitis media (CSOM), which may lead to involvement of other cranial nerves, petrous apicitis (apical petrositis), and bacterial meningitis.

Delayed-enhancement MRI of apical hypertrophic cardiomyopathy: assessment of the intramural distribution and comparison with clinical symptoms, ventricular arrhythmias, and cine MRI

International Nuclear Information System (INIS)

Amano, Yasuo; Fukushima, Yoshimitsu; Kumita, Shinichiro; Takayama, Morimasa; Kitamura, Mitsunobu

2011-01-01

Background: Hypertrophic cardiomyopathy (HCM) is reported to show patchy midwall myocardial hyper enhancement on delayed-enhancement magnetic resonance imaging (DE-MRI). The intramural distribution of myocardial hyper enhancement and its correlation with clinical symptoms, ventricular arrhythmias, and cardiac function have not been described for symptomatic apical HCM. Purpose: To evaluate the features and significance of myocardial hyper enhancement on DE-MRI in symptomatic apical HCM. Material and Methods: Thirteen patients with symptomatic apical HCM and their 65 apical segments were investigated. Myocardial hyper enhancement and regional and global functional parameters were determined with MRI. We investigated the intramural distribution and frequencies of this myocardial hyper enhancement and compared them with the patients' clinical symptoms, the presence of ventricular arrhythmias, and cine MRI. Results: Eight (61.5%) patients with symptomatic apical HCM displayed apical myocardial hyper enhancement, and 22 (33.8%) of the 65 apical segments examined showed myocardial hyper enhancement. Of the myocardial hyper enhancement observed, 81.8% showed a subendocardial pattern.The Hyperenhanced apical myocardium had a lower percentage of systolic myocardial thickening, and was associated with serious symptoms (e.g. syncope) and ventricular arrhythmias. Conclusion: Patients with symptomatic apical HCM showed myocardial hyper enhancement involving the subendocardial layer, which might be related to regional systolic dysfunction, serious clinical symptoms, and ventricular arrhythmias

Electrical and microstructural characterization of silver sheathed high Tc superconductors wires and ribbons

International Nuclear Information System (INIS)

Chaffron, L.; Regnier, P.; Schmirgeld, L.; Maurice, F.; Aguillon, C.; Senoussi, S.

1991-01-01

High Tc superconductors wires and ribbons were prepared according to the powder in tube method. It is shown that the electrical performances of the so prepared superconductors can be considerably improved, first by increasing as much as possible the density of the green body before sintering, and afterwards by melt texturing the sintered conductors. Some measurements of the transport critical current density of our conductors as a function of their diameter or their thickness are then presented and compared with indirect values obtained via the Bean method. The highest transport Jc measured in the present study, before melt texturing, are: 2250 and 5100 A/cm 2 at 77 and 63 K respectively, for a 50 μm thick silver sheathed ribbon. These figures compare nicely with the values of the intergranular critical current densities determined from magnetic measurements which are: 2100 and 5000 A/cm 2 at the same temperatures, and 40000 A/cm 2 at 4.2 K. Much higher intergranular values, in the range of 10 5 A/cm 2 were obtained after melt texturing the wires. Finally, microstructural characterizations carried out by X-ray diffraction, electron microprobe analysis and transmission electron microscopy are reported and discussed

Effect of the Channel Length on the Transport Characteristics of Transistors Based on Boron-Doped Graphene Ribbons

Directory of Open Access Journals (Sweden)

Paolo Marconcini

2018-04-01

Full Text Available Substitutional boron doping of devices based on graphene ribbons gives rise to a unipolar behavior, a mobility gap, and an increase of the I O N / I O F F ratio of the transistor. Here we study how this effect depends on the length of the doped channel. By means of self-consistent simulations based on a tight-binding description and a non-equilibrium Green’s function approach, we demonstrate a promising increase of the I O N / I O F F ratio with the length of the channel, as a consequence of the different transport regimes in the ON and OFF states. Therefore, the adoption of doped ribbons with longer aspect ratios could represent a significant step toward graphene-based transistors with an improved switching behavior.

Transverse resistive wall instability of an off-axis ribbon beam in a circular chamber

International Nuclear Information System (INIS)

Courant, E.D.; Month, M.

1978-06-01

High energy proton storage rings are designed to make maximal use of the available vacuum chamber aperture. This is dictated primarily by economic considerations. The accumulation of current in a typical high energy ring creates a rather unusual beam configuration: in particular, a ribbon beam in a circular chamber set well off the central axis. The result is an enhanced resistive wall instability. This could be anticipated from the strong dependence of the current threshold on the chamber radius for a centered beam. For an off-centered beam, one might expect that the relevant replacement for the radius would be the distance of closest approach. The case of a wide ribbon-type beam is treated. The current threshold is obtained as a solution to a coupled oscillator eigenvalue problem. When the beam is small as occurs near the beginning of current stack formation, the problem is reduced to a dispersion relation. Results are expressed in terms of ISABELLE parameters. Some conclusions relevant to the ISABELLE design are presented

Effect of the size of the apical enlargement with rotary instruments, single-cone filling, post space preparation with drills, fiber post removal, and root canal filling removal on apical crack initiation and propagation.

Science.gov (United States)

Çapar, İsmail Davut; Uysal, Banu; Ok, Evren; Arslan, Hakan

2015-02-01

The purpose of this study was to investigate the incidence of apical crack initiation and propagation in root dentin after several endodontic procedures. Sixty intact mandibular premolars were sectioned perpendicular to the long axis at 1 mm from the apex, and the apical surface was polished. Thirty teeth were left unprepared and served as a control, and the remaining 30 teeth were instrumented with ProTaper Universal instruments (Dentsply Maillefer, Ballaigues, Switzerland) up to size F5. The root canals were filled with the single-cone technique. Gutta-percha was removed with drills of the Rebilda post system (VOCO, Cuxhaven, Germany). Glass fiber-reinforced composite fiber posts were cemented using a dual-cure resin cement. The fiber posts were removed with a drill of the post system. Retreatment was completed after the removal of the gutta-percha. Crack initiation and propagation in the apical surfaces of the samples were examined with a stereomicroscope after each procedure. The absence/presence of cracks was recorded. Logistic regression was performed to analyze statistically the incidence of crack initiation and propagation with each procedure. The initiation of the first crack and crack propagation was associated with F2 and F4 instruments, respectively. The logistic regression analysis revealed that instrumentation and F2 instrument significantly affected apical crack initiation (P .05). Rotary nickel-titanium instrumentation had a significant effect on apical crack initiation, and post space preparation with drills had a significant impact on crack propagation. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Cryopreservation of in vitro shoot apices of Oxalis tuberosa Mol.

Science.gov (United States)

Gonzalez-Benito, M E; Mendoza-Condori, V H; Molina-Garcia, A D

2007-01-01

Oca (Oxalis tuberosa Mol.) is an under-utilized tuber crop from the Andean region. Cryopreservation would allow the safe and long-term preservation of the genetic resources of this crop. A protocol for the cryopreservation of in vitro grown shoots has been developed using the vitrification solution PVS2. Two genotypes were studied (G1 and G27). Nodal segments were cultured on MS medium and incubated at 10 degree C with 16 h photoperiod and 10 mol per square meter per second irradiance, for two weeks. Apices were then excised and cultured on MS+0.15 M sucrose for 3 days at 5 degree C in darkness. Subsequently, apices were immersed in a loading solution (liquid MS medium+2 M glycerol+0.4 M sucrose), and then treated with the vitrification solution PVS2 for 0 to 40 minutes. Cryovials were then immersed in liquid nitrogen. Four weeks after rewarming and culture on recovery medium, genotype G1 showed approximately 60 percent recovery (normal growth) with 20 min PVS2 treatment. Genotype G27 showed lower recovery (30 percent). Differential scanning calorimetry yielded a Tg midpoint for PSV2 solution of ca. -120 degree C. Calorimetric studies on apices at different stages of the cryopreservation protocol showed a change in calorimetric parameters consistent with a decrease in the amount of frozen water as the protocol advanced.

Adenine ribbon stabilized by Watson–Crick and Hoogsteen hydrogen Bonds: WFT and DFT study

Czech Academy of Sciences Publication Activity Database

Zierkiewicz, W.; Michalska, D.; Hobza, Pavel

2010-01-01

Roč. 12, č. 12 (2010), s. 2888-2894 ISSN 1463-9076 R&D Projects: GA MŠk LC512 Grant - others:Wroclaw University of Technology(PL) 343974/Z0304 Institutional research plan: CEZ:AV0Z40550506 Keywords : adenine ribbon * ab initio correlated calculations * self- organization Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.454, year: 2010

Single Versus Multi-visit Endodontic Treatment of Teeth with Apical ...

African Journals Online (AJOL)

2016 Annals of Medical and Health Sciences Research | Published by Wolters ... apical periodontitis: An in vivo study with 1-year evaluation. ... temporary filling and dressing during the interim period in ..... Financial support and sponsorship.

Coercivity enhancement and thermal-stability improvement in the melt-spun NdFeB ribbons by grain boundary diffusion

Science.gov (United States)

Xie, Jiajun; Yuan, Chao; Luo, Yang; Yang, Yuanfei; Hu, Bin; Yu, Dunbo; Yan, Wenlong

2018-01-01

Rapidly quenched NdFeB ribbons with high coercivity were obtained by Nd70Cu30 diffusion process. Samples with a high coercivity of 22.02 kOe at room temperature were obtained after grain boundary diffusion with 20 wt% Nd70Cu30 alloys. The NdCu diffusion process promoted grain growth in the ribbons, and grain boundary phases were formed with Cu segregation among NdFeB grains. Coercivity above 10 kOe at 150 °C was achieved in the bonded magnets with NdCu content over 10 wt%. The flux loss of bonded magnets was reduced by ∼32% at 120 °C after diffusion treatment with only a small amount (2 wt%) of NdCu.

Magnetic Resonance Imaging of Transient Left Ventricular Apical Ballooning Related to Emotional Stress: a Case Report

Energy Technology Data Exchange (ETDEWEB)

Lee, Mu Sook; Choi, Byoung Wook; Choe, Kyu Ok; Chung, Namsik [Yonsei University College of Medicine, Seoul (Korea, Republic of)

2007-02-15

Transient left ventricular apical ballooning is characterized by transient wall motion abnormalities involving the left ventricular apex and mid-ventricle in the absence of coronary arterial occlusion. A 66-year-old woman presented to the emergency department with chest pain that mimicked acute myocardial infarction. An aortogram showed akinesis from the mid to apical left ventricle with sparing of the basal segments. Four days later, she underwent MRI, which demonstrated characteristic apical contractile dysfunction, the same as the aortogram, without evidence of myocardial infarction on the MRI. Two weeks later, her symptoms were resolved and follow-up echocardiography showed normal ventricular function. We suggest that MRI might be an integrated imaging diagnostic tool for the diagnosis of this syndrome, which demonstrated characteristic apical contractile dysfunction with performing cine MRI, the absence of significant coronary artery stenosis with performing coronary MR angiography and the absence of myocardial infarction with performing contrast enhanced delayed MRI.

Magnetic Resonance Imaging of Transient Left Ventricular Apical Ballooning Related to Emotional Stress: a Case Report

International Nuclear Information System (INIS)

Lee, Mu Sook; Choi, Byoung Wook; Choe, Kyu Ok; Chung, Namsik

2007-01-01

Transient left ventricular apical ballooning is characterized by transient wall motion abnormalities involving the left ventricular apex and mid-ventricle in the absence of coronary arterial occlusion. A 66-year-old woman presented to the emergency department with chest pain that mimicked acute myocardial infarction. An aortogram showed akinesis from the mid to apical left ventricle with sparing of the basal segments. Four days later, she underwent MRI, which demonstrated characteristic apical contractile dysfunction, the same as the aortogram, without evidence of myocardial infarction on the MRI. Two weeks later, her symptoms were resolved and follow-up echocardiography showed normal ventricular function. We suggest that MRI might be an integrated imaging diagnostic tool for the diagnosis of this syndrome, which demonstrated characteristic apical contractile dysfunction with performing cine MRI, the absence of significant coronary artery stenosis with performing coronary MR angiography and the absence of myocardial infarction with performing contrast enhanced delayed MRI

Computed tomographic features of apical infection of equine maxillary cheek teeth: a retrospective study of 49 horses.

Science.gov (United States)

Bühler, M; Fürst, A; Lewis, F I; Kummer, M; Ohlerth, S

2014-07-01

Computed tomographic (CT) studies evaluating the relevance of individual CT features of apical infection in maxillary cheek teeth are lacking. To study the prevalence and relationship of single CT features in horses with and without clinical evidence of apical infection in maxillary cheek teeth. Retrospective case-control study. Multislice CT scans of the head of 49 horses were evaluated retrospectively. Changes of the infundibulum, pulp, root, lamina dura, periodontal space and alveolar bone in maxillary cheek teeth were recorded. Single CT changes were much more prevalent in the 28 horses with clinical signs. However, infundibular changes and a nondetectable lamina dura were also common in the 21 horses without clinical evidence of apical infection. Computed tomographic abnormalities of the pulp, root, periapical bone and periodontal space and the presence of a tooth fracture were significantly related. Infundibular changes were not associated with other CT signs of apical infection. Although nondetectable lamina dura was the most frequent CT change in all teeth in both studied groups, it was most commonly a solitary feature in otherwise normal teeth. Apical infections, defined as ≥3 CT changes, occurred mainly in the 108/208, 109/209 and 110/210 (Triadan numbers) and were found only in horses with clinical evidence of apical infection, except in one horse without clinical signs that had one affected root. Combined CT changes of the pulp, root, lamina dura, periapical bone and periodontal space and the presence of a tooth fracture appear to be reliable features to diagnose apical infection in maxillary cheek teeth. As a solitary feature, a nondetectable lamina dura should be interpreted cautiously and may even be considered normal due to its minor thickness and/or too low resolution of the imaging modality. © 2013 EVJ Ltd.

The relationship between apical root resorption and orthodontic tooth movement in growing subjects.

Science.gov (United States)

Xu, Tianmin; Baumrind, S

2002-07-01

To investigate the relationship between apical root resorption and orthodontic tooth movement in growing subjects. 58 growing subjects were collected randomly into the study sample and another 40 non-treated cases were used as control. The apical resoption of the upper central incisors was measured on periapical film and the incisor displacement was measured on lateral cephalogram. Using multiple linear regression analysis to examine the relationship between root resoption and the displacement of the upper incisor apex in each of four direction (retraction, advancement, intrusion and extrusion). The statistically significant negative association were found between resorption and both intrusion (P < 0.001) and extrusion (P < 0.05), but no significant association was found between resorption and both retraction and advancement. The regression analysis implied an average of 2.29 mm resorption in the absence of apical displacement. The likelihood that the magnitude of displacement of the incisor root is positively associated with root resoption in the population of treated growing subjects is very small.

Integrins Regulate Apical Constriction via Microtubule Stabilization in the Drosophila Eye Disc Epithelium

Directory of Open Access Journals (Sweden)

Vilaiwan M. Fernandes

2014-12-01

Full Text Available During morphogenesis, extracellular signals trigger actomyosin contractility in subpopulations of cells to coordinate changes in cell shape. To illuminate the link between signaling-mediated tissue patterning and cytoskeletal remodeling, we study the progression of the morphogenetic furrow (MF, the wave of apical constriction that traverses the Drosophila eye imaginal disc preceding photoreceptor neurogenesis. Apical constriction depends on actomyosin contractility downstream of the Hedgehog (Hh and bone morphogenetic protein (BMP pathways. We identify a role for integrin adhesion receptors in MF progression. We show that Hh and BMP regulate integrin expression, the loss of which disrupts apical constriction and slows furrow progression; conversely, elevated integrins accelerate furrow progression. We present evidence that integrins regulate MF progression by promoting microtubule stabilization, since reducing microtubule stability rescues integrin-mediated furrow acceleration. Thus, integrins act as a genetic link between tissue-level signaling events and morphological change at the cellular level, leading to morphogenesis and neurogenesis in the eye.

Analyses of Interactions Between Heparin and the Apical Surface Proteins of Plasmodium falciparum

Science.gov (United States)

Kobayashi, Kyousuke; Takano, Ryo; Takemae, Hitoshi; Sugi, Tatsuki; Ishiwa, Akiko; Gong, Haiyan; Recuenco, Frances C.; Iwanaga, Tatsuya; Horimoto, Taisuke; Akashi, Hiroomi; Kato, Kentaro

2013-11-01

Heparin, a sulfated glycoconjugate, reportedly inhibits the blood-stage growth of the malaria parasite Plasmodium falciparum. Elucidation of the inhibitory mechanism is valuable for developing novel invasion-blocking treatments based on heparin. Merozoite surface protein 1 has been reported as a candidate target of heparin; however, to better understand the molecular mechanisms involved, we characterized the molecules that bind to heparin during merozoite invasion. Here, we show that heparin binds only at the apical tip of the merozoite surface and that multiple heparin-binding proteins localize preferentially in the apical organelles. To identify heparin-binding proteins, parasite proteins were fractionated by means of heparin affinity chromatography and subjected to immunoblot analysis with ligand-specific antibodies. All tested members of the Duffy and reticulocyte binding-like families bound to heparin with diverse affinities. These findings suggest that heparin masks the apical surface of merozoites and blocks interaction with the erythrocyte membrane after initial attachment.

Management of an asymptomatic patient with the apical variant of hypertrophic cardiomyopathy.

Science.gov (United States)

Trojan, Meghan K Borden; Biederman, Robert W

2017-07-01

Healthcare professionals are faced with challenging decisions regarding patient evaluation and management on a daily basis. Once a diagnosis is made, additional challenges include how to proceed with the management. Here, we present an eighty-two-year-old female who was incidentally diagnosed with the apical variant of hypertrophic cardiomyopathy on a transthoracic echocardiogram. She was found to have newly diagnosed atrial fibrillation, but was otherwise asymptomatic from a cardiomyopathy standpoint. No specific guidelines exist for this patient population. Therefore, how does one proceed with the management of an asymptomatic patient with the apical variant of hypertrophic cardiomyopathy? © 2017, Wiley Periodicals, Inc.

The dynamics of the asymmetric motion of domain walls of sandwich domain structure in a Fe-based amorphous ribbon

Energy Technology Data Exchange (ETDEWEB)

Zhmetko, D.N., E-mail: sergey.zhmetko@gmail.com [Department of Physics, Zaporizhzhya National University, 66 Zhukovsky Street, 69063 Zaporizhzhya (Ukraine); Zhmetko, S.D. [Department of Physics, Zaporizhzhya National University, 66 Zhukovsky Street, 69063 Zaporizhzhya (Ukraine); Troschenkov, Y.N. [Institute for Magnetism, 36-b Vernadsky Boulevard, 03142 Kyiv (Ukraine); Matsura, A.V. [Department of Physics, Zaporizhzhya National University, 66 Zhukovsky Street, 69063 Zaporizhzhya (Ukraine)

2013-08-15

The frequency dependence of asymmetry of the domain walls velocity relative to the middle plane of amorphous ribbon is investigated. An additional pressure of the same direction acting on each domain wall caused by dependence of eddy current damping on the coordinate of the domain wall is revealed. The microscopic mechanisms of this additional pressure are considered. - Highlights: ► Additional pressure on the domain wall, caused by inhomogeneity of its damping. ► Asymmetry of the coordinate of the nucleation of domain walls and their damping. ► Connection between the components of additional pressure and its direction. ► Interaction of domain walls with the surface defects of the amorphous ribbon.

The dynamics of the asymmetric motion of domain walls of sandwich domain structure in a Fe-based amorphous ribbon

International Nuclear Information System (INIS)

Zhmetko, D.N.; Zhmetko, S.D.; Troschenkov, Y.N.; Matsura, A.V.

2013-01-01

The frequency dependence of asymmetry of the domain walls velocity relative to the middle plane of amorphous ribbon is investigated. An additional pressure of the same direction acting on each domain wall caused by dependence of eddy current damping on the coordinate of the domain wall is revealed. The microscopic mechanisms of this additional pressure are considered. - Highlights: ► Additional pressure on the domain wall, caused by inhomogeneity of its damping. ► Asymmetry of the coordinate of the nucleation of domain walls and their damping. ► Connection between the components of additional pressure and its direction. ► Interaction of domain walls with the surface defects of the amorphous ribbon

Adrenergic Modulation Regulates the Dendritic Excitability of Layer 5 Pyramidal Neurons In Vivo

Directory of Open Access Journals (Sweden)

Christina Labarrera

2018-04-01

Full Text Available Summary: The excitability of the apical tuft of layer 5 pyramidal neurons is thought to play a crucial role in behavioral performance and synaptic plasticity. We show that the excitability of the apical tuft is sensitive to adrenergic neuromodulation. Using two-photon dendritic Ca2+ imaging and in vivo whole-cell and extracellular recordings in awake mice, we show that application of the α2A-adrenoceptor agonist guanfacine increases the probability of dendritic Ca2+ events in the tuft and lowers the threshold for dendritic Ca2+ spikes. We further show that these effects are likely to be mediated by the dendritic current Ih. Modulation of Ih in a realistic compartmental model controlled both the generation and magnitude of dendritic calcium spikes in the apical tuft. These findings suggest that adrenergic neuromodulation may affect cognitive processes such as sensory integration, attention, and working memory by regulating the sensitivity of layer 5 pyramidal neurons to top-down inputs. : Labarrera et al. show that noradrenergic neuromodulation can be an effective way to regulate the interaction between different input streams of information processed by an individual neuron. These findings may have important implications for our understanding of how adrenergic neuromodulation affects sensory integration, attention, and working memory. Keywords: cortical layer 5 pyramidal neuron, dendrites, norepinephrine, HCN, Ih, Ca2+ spike, apical tuft, guanfacine, ADHD, somatosensory cortex

FY 1979 Annual report on Sunshine Project results. Research and development of photovoltaic power generation systems (Research and development of vertically drawn ribbon crystals of silicon); 1979 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-01

The efforts in this fiscal year for development of methods for vertically drawing ribbon crystals of silicon are directed to the following items, in order to further improve the techniques for vertically drawing two or more ribbon crystals on a continuous basis, developed in the previous fiscal year: (1) tests of the drawing apparatus, developed in the previous fiscal year, to deepen the techniques for drawing the ribbon crystals, (2) modification of the above apparatus to further develop the apparatus for vertically drawing two or more ribbon crystals on a continuous basis, (3) comparison of drawing a single ribbon crystal, conducted separately, with drawing two or more ribbon crystals, to clarify the problems involved in the latter, and (4) basic investigations on the materials for the furnace internals exposed to high temperature, other than the carbon material used at present. The vertically drawn ribbon crystals of silicon is investigated, based on the results obtained in the previous fiscal year that ribbon crystal quality depends on impurities present therein, mainly for (1) quantitative analysis of the impurity elements present in the ribbon crystal, (2) relationship between impurity elements and characteristics of the solar cells made on a trial basis, and (3) investigations on local concentration of the impurity elements. (NEDO)

FY 1977 Annual report on Sunshine Project results. Research and development of photovoltaic power generation systems (Research and development of vertically drawn ribbon crystals of silicon); 1977 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-31

This project is aimed at establishment of ribbon crystal production techniques and development of photovoltaic power generation systems incorporating the ribbon crystals, in order to greatly reduce cost of photovoltaic power generation systems. The research efforts in this fiscal year is focused on development of the techniques for continuously growing the ribbons, to attain the above goal by accelerating growth of the ribbon crystals in unit time and clarifying, in the early stage, the problems to be solved before commercializing the ribbon crystals for the future solar cells. The major research results are (1) development of the method for vertically drawing ribbon crystals of silicon, and (2) analysis of the vertically drawn ribbon crystals of silicon. For the item (1), the technological development efforts are focused on continuously drawing mechanisms and furnace for continuous drawing, with the structural studies as the center for the former and solution of heat-related problems for the latter, which eventually lead to development of a 800 mm long ribbon crystal passing over the roll. For the item (2), the crystal structure is analyzed by the electron channeling pattern method. The results suggest that use of a p-type substrate can improve average efficiency of the ribbon crystal type solar cell. (NEDO)

Mammalian Cochlear Hair Cell Regeneration and Ribbon Synapse Reformation

Directory of Open Access Journals (Sweden)

Xiaoling Lu

2016-01-01

Full Text Available Hair cells (HCs are the sensory preceptor cells in the inner ear, which play an important role in hearing and balance. The HCs of organ of Corti are susceptible to noise, ototoxic drugs, and infections, thus resulting in permanent hearing loss. Recent approaches of HCs regeneration provide new directions for finding the treatment of sensor neural deafness. To have normal hearing function, the regenerated HCs must be reinnervated by nerve fibers and reform ribbon synapse with the dendrite of spiral ganglion neuron through nerve regeneration. In this review, we discuss the research progress in HC regeneration, the synaptic plasticity, and the reinnervation of new regenerated HCs in mammalian inner ear.

Periapical fluid RANKL and IL-8 are differentially regulated in pulpitis and apical periodontitis.

Science.gov (United States)

Rechenberg, Dan-K; Bostanci, Nagihan; Zehnder, Matthias; Belibasakis, Georgios N

2014-09-01

The dental pulp space can become infected due to a breach in the surrounding hard tissues. This leads to inflammation of the pulp (pulpitis), soft tissue breakdown, and finally to bone loss around the root apex (apical periodontitis). The succession of the molecular events leading to apical periodontitis is currently not known. The main inflammatory mediator associated with neutrophil chemotaxis is interleukin-8 (IL-8), and with bone resorption the dyad of receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG). The levels of RANKL, OPG and IL-8 were studied in periapical tissue fluid of human teeth (n = 48) diagnosed with symptomatic irreversible pulpitis (SIP) and asymptomatic apical periodontitis (AAP). SIP represents the starting point, and AAP an established steady state of the disease. Periapical tissue fluid samples were collected using paper points and then evaluated using enzyme-linked immunosorbent assays (ELISAs). Target protein levels per case were calibrated against the corresponding total protein content, as determined fluorometrically. RANKL was expressed at significantly higher levels in SIP compared to AAP (P apical periodontitis, periapical bone resorption signaling, as determined by RANKL, occurs prior to inflammatory cell recruitment signaling, as determined by IL-8. Copyright © 2014 Elsevier Ltd. All rights reserved.

Absorbable Suture as an Apical Matrix in Single Visit Apexification with Mineral Trioxide Aggregate

Directory of Open Access Journals (Sweden)

Ayush Goyal

2016-01-01

Full Text Available Several procedures have been recommended to induce the root end barrier formation in teeth with open apices. Conventional treatment for such cases will require many appointments with an average duration of 12.9 months. During this period, the root canal is susceptible to reinfection from around the provisional restoration, which may promote apical periodontitis and arrest of apical repair. Mineral trioxide aggregate (MTA has been successfully used for one visit apexification wherein the root canal can be obturated within 24 hours after placement of MTA. Using a matrix prior to the placement of MTA avoids its extrusion, reduces leakage in the sealing material, and allows favorable response of the periapical tissues. This report presents a case of apexification where an absorbable suture was used as an apical matrix. Use of an absorbable suture circumvents all the problems associated with other conventional materials. Conclusion. Placement of the matrix made from the suture material is predictable and is easily positioned at the apex and the length can be adjusted as required. 10-month follow-up of the case shows resorbed matrix and bone healing in the periapical region. The patient was asymptomatic during the whole follow-up period and tooth exhibited mobility within physiologic limits and was functioning normally.

Absorbable Suture as an Apical Matrix in Single Visit Apexification with Mineral Trioxide Aggregate.

Science.gov (United States)

Goyal, Ayush; Nikhil, Vineeta; Jha, Padmanabh

2016-01-01

Several procedures have been recommended to induce the root end barrier formation in teeth with open apices. Conventional treatment for such cases will require many appointments with an average duration of 12.9 months. During this period, the root canal is susceptible to reinfection from around the provisional restoration, which may promote apical periodontitis and arrest of apical repair. Mineral trioxide aggregate (MTA) has been successfully used for one visit apexification wherein the root canal can be obturated within 24 hours after placement of MTA. Using a matrix prior to the placement of MTA avoids its extrusion, reduces leakage in the sealing material, and allows favorable response of the periapical tissues. This report presents a case of apexification where an absorbable suture was used as an apical matrix. Use of an absorbable suture circumvents all the problems associated with other conventional materials. Conclusion . Placement of the matrix made from the suture material is predictable and is easily positioned at the apex and the length can be adjusted as required. 10-month follow-up of the case shows resorbed matrix and bone healing in the periapical region. The patient was asymptomatic during the whole follow-up period and tooth exhibited mobility within physiologic limits and was functioning normally.

Predicting placebo response in adolescents with major depressive disorder: The Adolescent Placebo Impact Composite Score (APICS).

Science.gov (United States)

Nakonezny, Paul A; Mayes, Taryn L; Byerly, Matthew J; Emslie, Graham J

2015-09-01

The aim of this study was to construct a composite scoring system to predict the probability of placebo response in adolescents with Major Depressive Disorder (MDD). Participants of the current study were 151 adolescents (aged 12-17 years) who were randomized to the placebo arm (placebo transdermal patches) of a randomized controlled trial (RCT) comparing the selegiline transdermal patch with placebo (DelBello et al., 2014). The primary outcome of response was defined as a CGI-I score of 1 or 2 (very much or much improved) at week 12 (study-end) or exit. As a first step, a multiple logistic mixed model was used to estimate the odds of placebo response from each predictor in the model, including age, CDRS-R total at baseline (depressive symptom severity), history of recurrent depression (yes vs. no), sex (female vs. male), and race (non-Caucasian vs. Caucasian). On the basis of the initial logistic mixed model analysis, we then constructed an Adolescent Placebo Impact Composite Score (APICS) that became the sole predictor in a re-specified Bayesian logistic regression model to estimate the probability of placebo response. Finally, the AUC for the APICS was tested against a nominal area of 0.50 to evaluate how well the APICS discriminated placebo response status. Among the 151 adolescents, with a mean age of 14.6 years (SD = 1.6) and a mean baseline CDRS-R total of 60.6 (SD = 12.1), 68.2% were females, 50.3% was Caucasian, and 39.7% had a history of recurrent depression. Placebo response rate was 58.3%. Based on the logistic mixed model, the re-specified equation with the highest discriminatory ability to estimate the probability of placebo response was APICS = age + (0.32 × CDRS-R Total at baseline) + (-2.85 × if female) + (-5.50 × if history of recurrent depression) + (-5.85 × if non-Caucasian). The AUC for this model was 0.59 (p = .049). Within a Bayesian decision-theoretic framework, in 95.5% of the time, the 10,000 posterior Monte Carlo samples suggested

Participation of IAA in transduction of gravistimulus in apical cells of moss protonema

Science.gov (United States)

Oksyniuk, U. A.; Khorkavtsiv, O. Y.; Lesniak, Y. I.

Growth movements of vascular plant axis organs -- photo-, gravi- and other tropisms -- are tightly connected with IAA transport (Hertel, 1983; Medvedev, 1996; Kiss, 2000). Moss protonema synthesizes IAA (indole-3-acetic acid) and transports it basipetally favouring growth and differentiation of caulonema (Bopp, 1979; Rose, Bopp, 1983; Rose et al., 1983). We aimed at studying the role of IAA in moss protonema gravitropism using exogenous IAA, 1-NAA (1-naphthaleneacetic acid), 2,4D (2,4-dichlorophenoxyacetic acid) and inhibitors of polar IAA transport -- phytotropins NPA (N-1-naphthylphthalamic acid) and TIBA (2,3,5-triiodobenzoic acid). Six-day gravitropic protonema of Ceratodon purpureus and Pohlia nutans were taken for experiments. Auxin and phytotropins solutions were laid on protonema mats the latters being kept in solutions for 30 min. Then the surplus of solutions were poured off and Petri dishes were placed vertically for 6 h. 20 μ M of IAA and of other synthetic auxins did not significantly influence the angle of protonema gravity bending, 40 μ M of the agents, howewer, reduced the per cent of apical cells bendings and their angles. The most expressed influence on the angles of bending had the inhibitors of polar IAA transport -- NPA. 0,1 -- 3,0 μ M of this phytotropin did not change the form of apical cell, did not disturb the general distribution of amyloplasts and did not significantly lower the per cent and the value of gravity bending angle, though 10 μ M of the phytotropin - inhibited gravity bending. The mixture of 1-NAA and NPA having been added into the medium the influence of NPA was lowered and gravitropic growth renewed in course of time. 10 μ M of other phytopropin TIBA also inhibited gravitropism of Ceratodon purpureus and Pohlia nutans protonema. The analysis of basipetal transport of IAA in moss rhizoids and protonema may indicate the availability of special IAA transport in these structures (Bopp, Cerier, 1988). On the basis of the

Silicon ribbon technology assessment 1978-1986 - A computer-assisted analysis using PECAN

Science.gov (United States)

Kran, A.

1978-01-01

The paper presents a 1978-1986 economic outlook for silicon ribbon technology based on the capillary action shaping technique. The outlook is presented within the framework of two sets of scenarios, which develop strategy for approaching the 1986 national energy capacity cost objective of $0.50/WE peak. The PECAN (Photovoltaic Energy Conversion Analysis) simulation technique is used to develop a 1986 sheet material price ($50/sq m) which apparently can be attained without further scientific breakthrough.

Apical Extrusion of Debris Produced during Continuous Rotating and Reciprocating Motion

Directory of Open Access Journals (Sweden)

Giselle Nevares

2015-01-01

Full Text Available This study aimed to analyse and compare apical extrusion of debris in canals instrumented with systems used in reciprocating and continuous motion. Sixty mandibular premolars were randomly divided into 3 groups (n=20: the Reciproc (REC, WaveOne (WO, and HyFlex CM (HYF groups. One Eppendorf tube per tooth was weighed in advance on an analytical balance. The root canals were instrumented according to the manufacturer’s instructions, and standardised irrigation with 2.5% sodium hypochlorite was performed to a total volume of 9 mL. After instrumentation, the teeth were removed from the Eppendorf tubes and incubated at 37°C for 15 days to evaporate the liquid. The tubes were weighed again, and the difference between the initial and final weight was calculated to determine the weight of the debris. The data were statistically analysed using the Shapiro-Wilk, Wilcoxon, and Mann-Whitney tests (α=5%. All systems resulted in the apical extrusion of debris. Reciproc produced significantly more debris than WaveOne (p<0.05, and both systems produced a greater apical extrusion of debris than HyFlex CM (p<0.001. Cross section and motion influenced the results, despite tip standardization.

Light microscopic study of periapical lesions associated with asymptomatic apical periodontitis.

Science.gov (United States)

Kabak, S L; Kabak, Y S; Anischenko, S L

2005-04-01

The purpose of the study has been to evaluate the degree of chronic inflammation in tissues surrounding the apex of the tooth root in patients with apical periodontitis in the remission phase. The material included 37 apical granulomas and radicular cysts obtained as a result of apiectomy, and 20 teeth which were removed together with the focus of the periapical inflammation. Routine histological techniques, as well as the immunofluorescent and immuno-chemical methods were used to examine the material. Despite the absence of clinical symptoms in 23 of 57 cases, the morphological signs of chronic inflammation were observed in the apical area of the tooth root. Morphological signs of viral invasion of epithelial and stromal cells in the radicular cyst wall were revealed in six cases. The presence of the virus of Herpes simplex I in epithelial cells (five cases) and adenoviral invasion (one case) was confirmed by immuno-fluorescent and immuno-chemical methods. Histological examination often reveals morphological signs of an active inflammatory process in the periapical tissues of patients treated during clinical remission. In our opinion, the presence of viruses in the epithelial cells of the radicular cyst may contribute to the persistence of the active stage of the inflammatory process.

Relationship between human cytomegalovirus transcription and symptomatic apical periodontitis in Iran.

Science.gov (United States)

Yazdi, K A; Sabeti, M; Jabalameli, F; Eman eini, M; Kolahdouzan, S A; Slots, J

2008-12-01

Apical periodontitis of endodontic origin may develop as a result of cooperative interactions among herpesviruses, specific pathogenic bacteria and tissue-destructive inflammatory mediators. This study sought to identify the presence of Epstein-Barr virus (EBV) and human cytomegalovirus (HCMV) transcripts in symptomatic and asymptomatic periapical lesions of individuals living in Iran. Fifty endodontic patients (28 with symptomatic periapical lesions and 22 with asymptomatic periapical lesions) were included in the study. In each study subject, a microbiological periapical sample was collected using a curette in conjunction with periapical surgery. A reverse transcription-polymerase chain reaction assay was used to identify transcripts of EBV and HCMV. Human cytomegalovirus transcript was detected in 15 of the 28 (53.6%) symptomatic and in six of the 22 (27.3%) asymptomatic periapical study lesions (significant difference between symptomatic and asymptomatic lesions; P = 0.03, chi-square test). Epstein-Barr virus transcript was identified in one symptomatic and in two asymptomatic periapical lesions. This study establishes that HCMV transcription is common in apical periodontitis and is most frequent in symptomatic lesions. The high frequency of active herpesvirus infections in severe apical periodontitis changes the pathogenic paradigm of the disease and may also have preventive and therapeutic implications.

Apical versus Basal Neurogenesis Directs Cortical Interneuron Subclass Fate

Directory of Open Access Journals (Sweden)

Timothy J. Petros

2015-11-01

Full Text Available Fate determination in the mammalian telencephalon, with its diversity of neuronal subtypes and relevance to neuropsychiatric disease, remains a critical area of study in neuroscience. Most studies investigating this topic focus on the diversity of neural progenitors within spatial and temporal domains along the lateral ventricles. Often overlooked is whether the location of neurogenesis within a fate-restricted domain is associated with, or instructive for, distinct neuronal fates. Here, we use in vivo fate mapping and the manipulation of neurogenic location to demonstrate that apical versus basal neurogenesis influences the fate determination of major subgroups of cortical interneurons derived from the subcortical telencephalon. Somatostatin-expressing interneurons arise mainly from apical divisions along the ventricular surface, whereas parvalbumin-expressing interneurons originate predominantly from basal divisions in the subventricular zone. As manipulations that shift neurogenic location alter interneuron subclass fate, these results add an additional dimension to the spatial-temporal determinants of neuronal fate determination.

Evaluation of the anatomical alterations of lower molars mesial root’s apical third

OpenAIRE

FRÖNER, Izabel Cristina; IMPERADOR, Cristina Aparecida; SOUZA, Luiz Gustavo de

1999-01-01

The anatomical apex of the mesial root of the lower molars presents a morphological complexity related to the number and shape of the root canals as well as of the apical foramen and isthmus presence. The knowledge of the complexity of the endodontic system of the molar root area is essencial to select more carefully the best instrumentation and obturation technique, to obtain a more successful endodontic therapy. A presente pesquisa analisa in vitro as alterações anatômicas dos 4 mm apic...

78 FR 26614 - Narrow Woven Ribbon With Woven Selvedge From the People's Republic of China: Rescission of...

Science.gov (United States)

2013-05-07

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-952] Narrow Woven Ribbon With...; 2011-2012 AGENCY: Import Administration, International Trade Administration, Department of Commerce... Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution...

Deviations of Mesial Root Canals of Mandibular First Molar Teeth at the Apical Third: A Micro-computed Tomographic Study.

Science.gov (United States)

Keles, Ali; Keskin, Cangül

2018-04-19

The present study aimed to quantitatively analyze apical foramen deviations of mesial root canals of mandibular first molar teeth by means of micro-computed tomographic (micro-CT) imaging. Micro-CT images of the mesial roots of 109 mandibular first molar teeth with independent mesiobuccal (MB) and mesiolingual (ML) root canals were analyzed. The deviations of the apical foramina of the MB, ML, and middle mesial root canals from the anatomic apex were measured. The vertical distance between the apical foramina of each mesial root canal in relation to each other was also calculated. The distances from the apical foramina of the MB, ML, and middle mesial root canals to the anatomic apex of the mesial root were up to 2.51 mm, 3.21 mm, and 5.67 mm, respectively. There was no significant difference between the deviations of MB and ML root canals from each other (P > .05). The middle mesial root canal showed the greatest deviation compared with the MB and ML canals (P < .05). The apical foramina of mesial root canals of mandibular first molar teeth showed greater variations from each other and anatomic apices than previously reported. Clinically, the use of electronic apex locators for the detection of minor apical foramen of each mesial root canal is of the utmost important. Copyright © 2018 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Association analysis of clinical aspects and vitamin D receptor gene polymorphism with external apical root resorption in orthodontic patients.

Science.gov (United States)

Fontana, Maria Luiza S Simas Netta; de Souza, Cleber Machado; Bernardino, José Fabio; Hoette, Felix; Hoette, Maura Levi; Thum, Lotario; Ozawa, Terumi O; Capelozza Filho, Leopoldino; Olandoski, Marcia; Trevilatto, Paula Cristina

2012-09-01

Vitamin D is responsible for the regulation of certain genes at the transcription level, via interaction with the vitamin D receptor, and influences host immune responses and aspects of bone development, growth, and homeostasis. Our aim was to investigate the association of TaqI vitamin D receptor gene polymorphism with external apical root resorption during orthodontic treatment. Our subjects were 377 patients with Class II Division 1 malocclusion, divided into 3 groups: (1) 160 with external apical root resorption ≤1.43 mm, (2) 179 with external apical root resorption >1.43 mm), and (3) 38 untreated subjects. External apical root resorption of the maxillary incisors was evaluated on periapical radiographs taken before and after 6 months of treatment. After DNA collection and purification, vitamin D receptor TaqI polymorphism analysis was performed by polymerase chain reaction-restriction fragment length polymorphism. Univariate and multivariate analyses were performed to verify the association of clinical and genetic variables with external apical root resorption (P root resorption in orthodontically treated patients compared with the untreated subjects. In patients orthodontically treated, age higher than 14 years old, initial size of the maxillary incisor root superior to 30 mm, and premolar extraction were associated with increased external apical root resorption. Genotypes containing the C allele were weakly associated with protection against external apical root resorption (CC + CT × TT [odds ratio, 0.29; 95% confidence interval, 0.07-1.23; P = 0.091]) when treated orthodontic patients were compared to untreated individuals. Clinical factors and vitamin D receptor TaqI polymorphism were associated with external apical root resorption in orthodontic patients. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Apically extruded dentin debris by reciprocating single-file and multi-file rotary system.

Science.gov (United States)

De-Deus, Gustavo; Neves, Aline; Silva, Emmanuel João; Mendonça, Thais Accorsi; Lourenço, Caroline; Calixto, Camila; Lima, Edson Jorge Moreira

2015-03-01

This study aims to evaluate the apical extrusion of debris by the two reciprocating single-file systems: WaveOne and Reciproc. Conventional multi-file rotary system was used as a reference for comparison. The hypotheses tested were (i) the reciprocating single-file systems extrude more than conventional multi-file rotary system and (ii) the reciprocating single-file systems extrude similar amounts of dentin debris. After solid selection criteria, 80 mesial roots of lower molars were included in the present study. The use of four different instrumentation techniques resulted in four groups (n = 20): G1 (hand-file technique), G2 (ProTaper), G3 (WaveOne), and G4 (Reciproc). The apparatus used to evaluate the collection of apically extruded debris was typical double-chamber collector. Statistical analysis was performed for multiple comparisons. No significant difference was found in the amount of the debris extruded between the two reciprocating systems. In contrast, conventional multi-file rotary system group extruded significantly more debris than both reciprocating groups. Hand instrumentation group extruded significantly more debris than all other groups. The present results yielded favorable input for both reciprocation single-file systems, inasmuch as they showed an improved control of apically extruded debris. Apical extrusion of debris has been studied extensively because of its clinical relevance, particularly since it may cause flare-ups, originated by the introduction of bacteria, pulpal tissue, and irrigating solutions into the periapical tissues.

The Effect of Calcium Hydroxide As an Intracanal Medication of The Apical Microleakage

Directory of Open Access Journals (Sweden)

Heshmat Mohajer AR

2011-12-01

Full Text Available Background and Aims: Nowadays, calcium hydroxide is used as a dressing for canal sterilization and repair progression of apical lesions. The aim of this study was to investigate the effect of calcium hydroxide as an intracanal medicament on the apical microleakage of root filling.Materials and Methods: In this experimental study, 46 extracted single-rooted human teeth were instrumented with step-back technique to master apical file (MAF size 35. Specimens were randomly divided into 2 groups (n = 20. In group 1, the specimens were treated with calcium hydroxide intracanal medication; and in group 2, the samples did not receive any medication. The teeth were incubated in 100% humidity at 37°C for one week. After that, calcium hydroxide was removed using irrigation with normal saline and reaming with MAF. The root canals were obturated with gutta- percha and AH26 sealer using lateral compaction technique. Specimens were incubated in 100% humility at 37°C for 72 hours and then immersed in India ink for 1 week. Finally, the teeth were cleared and the maximum linear dye penetration was measured under a stereomicroscope at 4X magnification. The data were analyzed by T-test and Chi-square.Results: There was no significant difference between the two experimental groups (P=0.068. Conclusion: The findings of this study indicated that using calcium hydroxide as an intracanal medicament did not influence the apical microleakage after final obturation of the root canal system.

Effect of Instrumentation Length and Instrumentation Systems: Hand Versus Rotary Files on Apical Crack Formation - An In vitro Study.

Science.gov (United States)

Devale, Madhuri R; Mahesh, M C; Bhandary, Shreetha

2017-01-01

Stresses generated during root canal instrumentation have been reported to cause apical cracks. The smaller, less pronounced defects like cracks can later propagate into vertical root fracture, when the tooth is subjected to repeated stresses from endodontic or restorative procedures. This study evaluated occurrence of apical cracks with stainless steel hand files, rotary NiTi RaCe and K3 files at two different instrumentation lengths. In the present in vitro study, 60 mandibular premolars were mounted in resin blocks with simulated periodontal ligament. Apical 3 mm of the root surfaces were exposed and stained using India ink. Preoperative images of root apices were obtained at 100x using stereomicroscope. The teeth were divided into six groups of 10 each. First two groups were instrumented with stainless steel files, next two groups with rotary NiTi RaCe files and the last two groups with rotary NiTi K3 files. The instrumentation was carried out till the apical foramen (Working Length-WL) and 1 mm short of the apical foramen (WL-1) with each file system. After root canal instrumentation, postoperative images of root apices were obtained. Preoperative and postoperative images were compared and the occurrence of cracks was recorded. Descriptive statistical analysis and Chi-square tests were used to analyze the results. Apical root cracks were seen in 30%, 35% and 20% of teeth instrumented with K-files, RaCe files and K3 files respectively. There was no statistical significance among three instrumentation systems in the formation of apical cracks (p=0.563). Apical cracks were seen in 40% and 20% of teeth instrumented with K-files; 60% and 10% of teeth with RaCe files and 40% and 0% of teeth with K3 files at WL and WL-1 respectively. For groups instrumented with hand files there was no statistical significance in number of cracks at WL and WL-1 (p=0.628). But for teeth instrumented with RaCe files and K3 files significantly more number of cracks were seen at WL than

Design and development of CAMAC test module

International Nuclear Information System (INIS)

Kulkarni, S.G.; Gore, J. A.; Gupta, A.K.; Saxena, A.

2015-01-01

Various Computer automated measurement and control (CAMAC) modules are used in control and monitoring of Pelletron Accelerator. 24 channels CAMAC Input Gate is used for getting the ON/OFF status of various devices in the Pelletron Accelerator. If a channel has 24 V then the status is 'ON' and if the channel receives 0 V then the status is 'OFF'. Hence we can get the status of 24 different channels though one CAMAC Input Gate module. The status is transported to the PC via CAMAC controller. The manual testing of CAMAC Input Gate involves connection of 24 V to each channel and checking the status of each channel with Graphical user interface (GUI) software. This process of checking input gate is automated by developing a CAMAC Test module which is connected to CAMAC Input Gate with a 50 pin ribbon cable. The Test module automatically generates 24 V /0 V on each channel to be tested depending on the software GUI buttons labeled as 'ON'/'OFF' in labview. The status of CAMAC Input Gate is displayed on GUI for all 24 channels. Hence the user can check the working of each channel on GUI written in labview. This automated process of checking the CAMAC Input Gate saves time to debug problems in module and identifying the bad channel which can be subsequently repaired. The CAMAC Test module uses Spartan 2 FPGA which is connected to 24 transistors which in turn operates 24 relays. 24 V supply is connected to the relay secondary contacts which open/close as per the transistor inputs. The 24 V contacts are connected to the module output connector which should be connected to CAMAC Input Gate which is to be tested. (author)

Assessment of apically extruded debris produced by the self-adjusting file system.

Science.gov (United States)

De-Deus, Gustavo André; Nogueira Leal Silva, Emmanuel João; Moreira, Edson Jorge; de Almeida Neves, Aline; Belladonna, Felipe Gonçalves; Tameirão, Michele

2014-04-01

This study was designed to quantitatively evaluate the amount of apically extruded debris by the Self-Adjusting-File system (SAF; ReDent-Nova, Ra'anana, Israel). Hand and rotary instruments were used as references for comparison. Sixty mesial roots of mandibular molars were randomly assigned to 3 groups (n = 20). The root canals were instrumented with hand files using a crown-down technique. The ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) and SAF systems were used according to the manufacturers' instructions. Sodium hypochlorite was used as an irrigant, and the apically extruded debris was collected in preweighted glass vials and dried afterward. The mean weight of debris was assessed with a microbalance and statistically analyzed using 1-way analysis of variance and the post hoc Tukey multiple comparison test. Hand file instrumentation produced significantly more debris compared with the ProTaper and SAF systems (P system produced significantly more debris compared with the SAF system (P systems caused apical debris extrusion. SAF instrumentation was associated with less debris extrusion compared with the use of hand and rotary files. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Novel navigation technique for the endodontic treatment of a molar with pulp canal calcification and apical pathology.

Science.gov (United States)

Shi, Xilin; Zhao, Shiyong; Wang, Weidong; Jiang, Qianzhou; Yang, Xuechao

2018-04-01

Apical periodontitis, the inflammation of periapical tissue, commonly requires root canal treatment to achieve apical healing. However, if it is accompanied by pulp canal calcification, the treatment becomes complicated, and locating the root canal can be challenging. This case report describes a novel approach for treating a molar with pulp canal calcification and apical pathology. Due to the risk of perforation during treatment, a digitally printed template was used to assist in accurately locating the root canal. After six months, the patient was asymptomatic and the periradicular radiolucency was gradually reducing in size. © 2017 Australian Society of Endodontology Inc.

Inhibition of Apical Root Resorption by Calcium Hydroxide During Orthodontic Treatment: A Case Report

OpenAIRE

Pacheco, Cinthia Mara da Fonseca; Pacheco, Daniela da Fonseca; Motta, Patrícia Gonçalves da

2016-01-01

Apical root resorption is a common outcome of orthodontic treatment. The present article reports a case of absence of apical root resorption in a left maxillary lateral incisor filled with calcium hydroxide paste throughout orthodontic movement. After orthodontic treatment was completed the tooth was subsequently obturatedwith gutta-percha and the patient followed for 18 months. The presence of a periapical lesion and the properties of calcium hydroxide as a root resorption inhibitor were dec...

Crystallization and Martensitic Transformation Behavior of Ti-Ni-Si Alloy Ribbons Prepared via Melt Spinning.

Science.gov (United States)

Park, Ju-Wan; Kim, Yeon-Wook; Nam, Tae-Hyun

2018-09-01

Ti-(50-x)Ni-xSi (at%) (x = 0.5, 1.0, 3.0, 5.0) alloy ribbons were prepared via melt spinning and their crystallization procedure and transformation behavior were investigated using differential scanning calorimtry, X-ray diffraction, and transmission electron microscopy. Ti-Ni-Si alloy ribbons with Si content less than 1.0 at% were crystalline, whereas those with Si content more than 3.0 at% were amorphous. Crystallization occurred in the sequence of amorphous →B2 → B2 → Ti5Si4 + TiNi3 → B2 + Ti5Si4 + TiNi3 + TiSi in the Ti-47.0Ni-3.0Si alloy and amorphous →R → R + Ti5Si4 + TiNi3 → R + Ti5Si4 + TiNi3 + TiSi in the Ti-45.0Ni-5.0Si alloy. The activation energy for crystallization was 189 ±8.6 kJ/mol for the Ti-47Ni-3Si alloy and 212±8.6 kJ/mol for the Ti-45Ni-5Si alloy. One-stage B2-R transformation behavior was observed in Ti-49.5Ni-0.5Si, Ti-49.0Ni-1.0Si, and Ti-47.0Ni- 3.0Si alloy ribbons after heating to various temperatures in the range of 873 K to 1073 K. In the Ti-45.0Ni-5.0Si alloy, one-stage B2-R transformation occurred after heating to 893 K, two-stage B2-R-B19' occurred after heating to 973 K, and two-stage B2-R-B19' occurred on cooling and one-stage B19'-B2 occurred on heating, after heating to 1073 K.

Evaluation of the endodontic apical seal after post insertion by synchrotron radiation microtomography

International Nuclear Information System (INIS)

Contardo, L.; De Luca, M.; Biasotto, M.; Longo, R.; Olivo, A.; Pani, S.; Di Lenarda, R.

2005-01-01

The commonly used methods for evaluating the endodontic apical seal, such as longitudinal and transversal section and diaphanization, show some operative difficulties and intrinsic limitation. This study suggests and describes a new method of analysis using a synchrotron radiation microtomography to analyse the root apex after post insertion, creating a three-dimensional image and analysing sections of the specimen every 5μm. The study was performed at SYRMEP beam line at the Electra Synchrotron in Trieste using monochromatic X-rays of 32KeV. Eleven monoradicular teeth were prepared using NiTi GT Rotary files instruments to an apical size 20 with conicity .06 and divided in four groups: in G1 (n=4) and G2 (n=2), the specimens were endodontically filled with guttapercha and a zinc-oxide sealer, in G3 (n=3) and G4 (n=2) guttapercha and a silicon-based sealer were used. An endodontic post was inserted in specimens of groups 1 and 3 following the manufacturer's instructions. Specimens were analysed using monochromatic X-rays of 32KeV. A CCD detector with pixel dimension pf 5x5μm 2 was used for the acquisition process. Seven hundred and twenty projections were performed over 180 o range using a high-resolution rotator. The projections were reconstructed using standard algorithms for tomographic reconstruction. The apical infiltration was evaluated by verifying if black spots were detectable on the images. The specimens of groups 3 and 4 showed a better apical seal than the ones of groups 1 and 2. Post insertion, when a ZOE-based sealer is used, increases the apical gap even if it does not seem to be clinically relevant and sufficient to be a cause of endodontic failure. The new method for analysis appeared to be effective to detect small defects in endodontic obturation, analysing guttapercha-sealer and sealer-dentin interfaces

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software.

Science.gov (United States)

Giannastasio, Daiana; Rosa, Ricardo Abreu da; Peres, Bernardo Urbanetto; Barreto, Mirela Sangoi; Dotto, Gustavo Nogara; Kuga, Milton Carlos; Pereira, Jefferson Ricardo; Só, Marcus Vinícius Reis

2013-01-01

This study has two aims: 1) to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2) to compare, with Adobe Photoshop, the ability of a new software (Regeemy) in superposing and subtracting images. Twenty five simulated root canals in acrylic-resin blocks (with 20º curvature) underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8×8 cm FoV selection). Canals were prepared up to F2 (ProTaper) and 24.04 (Wizard CD Plus) instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05). ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05). Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop.

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software

Science.gov (United States)

GIANNASTASIO, Daiana; da ROSA, Ricardo Abreu; PERES, Bernardo Urbanetto; BARRETO, Mirela Sangoi; DOTTO, Gustavo Nogara; KUGA, Milton Carlos; PEREIRA, Jefferson Ricardo; SÓ, Marcus Vinícius Reis

2013-01-01

Objective This study has two aims: 1) to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2) to compare, with Adobe Photoshop, the ability of a new software (Regeemy) in superposing and subtracting images. Material and Methods Twenty five simulated root canals in acrylic-resin blocks (with 20º curvature) underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8×8 cm FoV selection). Canals were prepared up to F2 (ProTaper) and 24.04 (Wizard CD Plus) instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. Results The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05). ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05). Conclusion Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop. PMID:24212994

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software

Directory of Open Access Journals (Sweden)

Daiana Giannastasio

2013-09-01

Full Text Available OBJECTIVE: This study has two aims: 1 to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2 to compare, with Adobe Photoshop, the ability of a new software (Regeemy in superposing and subtracting images. MATERIAL AND METHODS: Twenty five simulated root canals in acrylic-resin blocks (with 20º curvature underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8×8 cm FoV selection. Canals were prepared up to F2 (ProTaper and 24.04 (Wizard CD Plus instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. RESULTS: The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05. ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05. CONCLUSION: Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop.

Short-range ferromagnetism in alloy ribbons of Fe-Cr-Si-Nb-(Ag, Cu)

Energy Technology Data Exchange (ETDEWEB)

THANH, P. Q.; HOA, N. Q.; CHAU, N. [Vietnam National University, Hanoi (Viet Nam); HUU, C. X. [Danang University of Technology, Danang (Viet Nam); NGO, D. T. [Technical University of Denmark, Kgs. Lyngby (Denmark); PHAN, T. L. [Chungbuk National University, Cheongju (Korea, Republic of)

2014-04-15

We have studied the magnetic properties of two amorphous alloy ribbons Fe{sub 72}Cr{sub 6}Si{sub 4}Nb{sub 5}B{sub 12}Ag{sub 1} (FCSNB-Ag) and Fe{sub 72}Cr{sub 6}Si{sub 4}Nb{sub 5}B{sub 12}Cu{sub 1} (FCSNB-Cu), prepared by using a melt-spinning technique. Magnetization (M) measurements for various temperatures (T) and magnetic fields (H) indicate that ferromagnetic-paramagnetic (FM-PM) phase transitions take place in FCSNB-Ag and FCSNB-Cu at Curie temperatures (T{sub C} ) of about 308.3 K and 322.5 K, respectively. Analyses of M - H data at different temperatures in the vicinity of the FM-PM phase transition based on the modified Arrott plot method and scaling hypothesis yielded the exponent values of β = 0.369 ± 0.005, γ = 1.359 ± 0.005 and δ = 4.7 ± 0.1 for FCSNB-Ag, and β = 0.376 ± 0.002, γ = 1.315 ± 0.006 and δ = 4.5 ± 0.1 for FCSNB-Cu. Compared with the values from theoretical models, these values are close to those expected for the 3D Heisenberg model, demonstrating the existence of short-range FM order in the amorphous alloy ribbons.

"In vitro" evaluation of the apical sealing of root canals obturated with different techniques Avaliação "in vitro" do selamento apical dos canais radiculares em função de diferentes técnicas de obturação

Directory of Open Access Journals (Sweden)

Viviane Haiub Brosco

2003-09-01

Full Text Available The purpose of this study was to compare the apical sealing of root canals obturated with different techniques. One hundred-six human mandibular incisors were submitted to instrumentation by means of the step-back technique. After instrumentation, one hundred teeth received an impermeable coating on the external surfaces of the crown and root (except for the area nearby the apical foramen. Afterwards, they were divided in five groups containing twenty elements each, according to the obturation technique employed: 1. lateral condensation with Kerr file; 2. continuous wave of condensation technique with System B; 3. thermoplasticized injectable gutta-percha technique with the Ultrafil system; 4. mechanically thermoplasticized gutta-percha with the JS Quick-Fill system and 5. thermoplasticized gutta-percha associated to a master cone with the Microseal system. The six remaining teeth were employed as negative and positive controls. After obturation, the access cavities were sealed and the teeth were immersed in aqueous 2% methylene blue dye for 72 hours at 37ºC. After that, the teeth were longitudinally sectioned and the apical microleakage was evaluated in a stereomicroscope. The Microseal system presented the best apical sealing ability, followed by System B, JS Quick-Fill, Ultrafil and the lateral condensation technique. The statistical analysis of the results demonstrated that: 1. the Microseal system presented an apical sealing similar to System B and better than the other groups; 2. System B presented better apical sealing than the lateral condensation technique, being similar to the other groups; and 3. the lateral condensation, Ultrafil and JS Quick-Fill groups demonstrated similar sealing ability.Este estudo teve como objetivo avaliar o selamento apical de canais radiculares obturados por diferentes técnicas. Cento e seis incisivos inferiores humanos tiveram seus canais instrumentados através da técnica escalonada regressiva. Após a

Full-scale magnetic, microstructural, and physical properties of bilayered CoSiB/FeSiB ribbons

Czech Academy of Sciences Publication Activity Database

Životský, O.; Titov, A.; Jirásková, Yvonna; Buršík, Jiří; Kalbáčová, J.; Janičkovič, D.; Švec, P.

2013-01-01

Roč. 581, DEC (2013), s. 685-692 ISSN 0925-8388 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0068 Keywords : Bilayered ribbons * Soft magnetic materials * Microstructure * Surface and bulk magnetic properties Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.726, year: 2013

Calcium hydroxide as intracanal dressing for teeth with apical periodontitis

Directory of Open Access Journals (Sweden)

Sari Dewiyani

2011-03-01

Full Text Available Background: Root canal infection and periapical diseases are caused by bacteria and their products. Long term infection may spread bacteria throughout the root canal system. Apical periodontitis caused by infectious microbe that persistent in root canals can cause radiographic and histopathology periapical changes. Chemomechanical preparation and intracanal dressing then are recommended to be conducted and used in between visits to eliminate microbes in root canals. Calcium hydroxide (Ca(OH2 can be used as intracanal dressing since it can be used as musical physical defense barrier to eliminate re-infection in root canal and to disturb nutrition supply for bacterial development. Purpose: The aim of this study is observe the effectiveness of Ca(OH2 in treating endodontic teeth with apical periodontitis. Cases: Case 1 and 3 are about patients whose left posterior mandibular teeth had spontaneous intermittent pain. Case 2 is about a patient whose left posterior maxillary teeth had gingival abscess and fracture history. Based on the radiographic examination, it was known that the filling of root canal was incomplete and there was radiolucency in the apical area. Case management: The cases were treated with triad endodontics, which involves preparation, disinfection by using 2.5% NaOCl as irrigation substance and calcium hydroxide as intracanal dressing, and then the filling of root canal with gutta percha and endomethasone root canal cement. Evaluations were conducted one month, 12 months, and 24 months after the treatment. Conclusion: Calcium hydroxide is effective to be used as intracanal dressing in apical periodontitis cases.Latar belakang: Infeksi saluran akar dan penyakit periapeks disebabkan oleh mikroba dan produknya. Infeksi yang berlangsung lama memungkinkan bakteri masuk ke dalam seluruh sistem saluran akar. Periodontitis apikal disebabkan oleh infeksi persisten mikroba di dalam sistem saluran akar disertai perubahan radiografik dan

Comparative evaluation of total RNA extraction methods in Theobroma cacao using shoot apical meristems.

Science.gov (United States)

Silva, D V; Branco, S M J; Holanda, I S A; Royaert, S; Motamayor, J C; Marelli, J P; Corrêa, R X

2016-03-04

Theobroma cacao is a species of great economic importance with its beans used for chocolate production. The tree has been a target of various molecular studies. It contains many polyphenols, which complicate the extraction of nucleic acids with the extraction protocols requiring a large amount of plant material. These issues, therefore, necessitate the optimization of the protocols. The aim of the present study was to evaluate different methods for extraction of total RNA from shoot apical meristems of T. cacao 'CCN 51' and to assess the influence of storage conditions for the meristems on the extraction. The study also aimed to identify the most efficient protocol for RNA extraction using a small amount of plant material. Four different protocols were evaluated for RNA extraction using one shoot apical meristem per sample. Among these protocols, one that was more efficient was then tested to extract RNA using four different numbers of shoot apical meristems, subjected to three different storage conditions. The best protocol was tested for cDNA amplification using reverse transcription-polymerase chain reaction; the cDNA quality was determined to be satisfactory for molecular analyses. The study revealed that with the best RNA extraction protocol, one shoot apical meristem was sufficient for extraction of high-quality total RNA. The results obtained might enable advances in genetic analyses and molecular studies using reduced amount of plant material.

Coupling-governed metamorphoses of the integrable nonlinear Schrödinger system on a triangular-lattice ribbon

Energy Technology Data Exchange (ETDEWEB)

Vakhnenko, Oleksiy O., E-mail: vakhnenko@bitp.kiev.ua

2016-05-27

Highlights: • The integrable nonlinear Schrödinger system on a triangular-lattice ribbon is inclined to metamorphoses. • The system under study is capable to incorporate the effect of external linear potential. • The system criticality against the background parameter reduces the number of independent field variables. • At critical point the system Poisson structure becomes degenerate. • The effect of criticality is elucidated by the system one-soliton solution. - Abstract: The variativity of governing coupling parameters in the integrable nonlinear Schrödinger system on a triangular-lattice ribbon is shown to ensure the important qualitative rearrangements in the system dynamics. There are at least the two types of system crucial modifications stipulated by the two types of governing parameters. Thus the longitudinal coupling parameters regulated mainly by the background values of concomitant field variables are responsible for the bifurcation of primary integrable nonlinear system into the integrable nonlinear system of Ablowitz–Ladik type. As a consequence in a critical point the number of independent field variables is reduced by a half and the system Poisson structure turns out to be degenerate. On the other hand the transverse coupling parameters regulated basically by the choice of their a priori arbitrary dependencies on time are capable to incorporate the effect of external linear potential. As a consequence the primary integrable nonlinear system with appropriately adjusted parametrical driving becomes isomorphic to the system modeling the Bloch oscillations of charged nonlinear carriers in an electrically biased ribbon of triangular lattice. The multi-component structure of basic integrable system alongside with the attractive character of system nonlinearities has predetermined the logic of whole consideration.

Drosophila Big bang regulates the apical cytocortex and wing growth through junctional tension.

Science.gov (United States)

Tsoumpekos, Giorgos; Nemetschke, Linda; Knust, Elisabeth

2018-03-05

Growth of epithelial tissues is regulated by a plethora of components, including signaling and scaffolding proteins, but also by junctional tension, mediated by the actomyosin cytoskeleton. However, how these players are spatially organized and functionally coordinated is not well understood. Here, we identify the Drosophila melanogaster scaffolding protein Big bang as a novel regulator of growth in epithelial cells of the wing disc by ensuring proper junctional tension. Loss of big bang results in the reduction of the regulatory light chain of nonmuscle myosin, Spaghetti squash. This is associated with an increased apical cell surface, decreased junctional tension, and smaller wings. Strikingly, these phenotypic traits of big bang mutant discs can be rescued by expressing constitutively active Spaghetti squash. Big bang colocalizes with Spaghetti squash in the apical cytocortex and is found in the same protein complex. These results suggest that in epithelial cells of developing wings, the scaffolding protein Big bang controls apical cytocortex organization, which is important for regulating cell shape and tissue growth. © 2018 Tsoumpekos et al.

The Effect of Canal Contamination with Saliva on Apical Sealing

Directory of Open Access Journals (Sweden)

S Sabaghi

2014-08-01

Methods: In this laboratory study, 58 human uni-root teeth were cleaned and shaped for obturation with gutta percha and sealer AH26. In the case group, specimens were contaminated with human saliva immediately before obturation, whereas the teeth in the control group were kept dry. All canals were filled by lateral condensation technique. Moreover, the teeth were placed in methylene blue dye for 3 days. Dye penetration was measured using a stereomicrosope. As a matter of fact, the study data were analyzed via utilizing t-test. Results: A significant difference was found between the two groups in regard with the apical leakage(P<0.001. The microleakage mean of dye in the dry group was 3/48mm, whereas it was 6/36mm in the saliva contaminated group. Conclusion: The study findings revealed that complete drying of canal can improve apical sealing.

Modulation infrared thermometry of caloric effects at up to kHz frequencies

Science.gov (United States)

Döntgen, Jago; Rudolph, Jörg; Waske, Anja; Hägele, Daniel

2018-03-01

We present a novel non-contact method for the direct measurement of caloric effects in low volume samples. The adiabatic temperature change ΔT of a magnetocaloric sample is very sensitively determined from thermal radiation. Rapid modulation of ΔT is induced by an oscillating external magnetic field. Detection of thermal radiation with a mercury-cadmium-telluride detector allows for measurements at field frequencies exceeding 1 kHz. In contrast to thermoacoustic methods, our method can be employed in vacuum which enhances adiabatic conditions especially in the case of small volume samples. Systematic measurements of the magnetocaloric effect as a function of temperature, magnetic field amplitude, and modulation frequency give a detailed picture of the thermal behavior of the sample. Highly sensitive measurements of the magnetocaloric effect are demonstrated on a 2 mm thick sample of gadolinium and a 60 μm thick Fe80B12Nb8 ribbon.

Symptomatic and asymptomatic apical periodontitis associated with red complex bacteria: clinical and microbiological evaluation.

Science.gov (United States)

Buonavoglia, Alessio; Latronico, Francesca; Pirani, Chiara; Greco, Maria Fiorella; Corrente, Marialaura; Prati, Carlo

2013-01-01

In this study, the association of red complex (RC) bacteria that include Treponema denticola, Tannerella forsythia and Porphyromonas gingivalis with acute, exacerbated or chronic apical periodontitis was evaluated. Seventy-one patients with periapical disease were evaluated by clinical examination and microbiological samples obtained from the root canals were analyzed by a polymerase chain reaction assay. Twenty-one (29.6%) samples were positive for RC bacteria, with T. denticola, T. forsythia and P. gingivalis being detected in 14 (19.7%), 10 (14.1%) and 6 (8.5%) samples, respectively. RC bacteria were mainly associated with acute apical periodontitis (29.2%) and phoenix abscess (63.2%), while they were only sporadically detected (7.1%) in patients with chronic apical periodontitis. Generally, RC bacteria were associated with pain and a higher frequency of intracanalar/intrasulcular pus drainage. Involvement of RC bacteria in symptomatic periapical disease should be suspected in the presence of particularly severe clinical pain and pus drainage.

Optimization of the polarized Klein tunneling currents in a sub-lattice: pseudo-spin filters and latticetronics in graphene ribbons.

Science.gov (United States)

López, Luis I A; Yaro, Simeón Moisés; Champi, A; Ujevic, Sebastian; Mendoza, Michel

2014-02-12

We found that with an increase of the potential barrier applied to metallic graphene ribbons, the Klein tunneling current decreases until it is totally destroyed and the pseudo-spin polarization increases until it reaches its maximum value when the current is zero. This inverse relation disfavors the generation of polarized currents in a sub-lattice. In this work we discuss the pseudo-spin control (polarization and inversion) of the Klein tunneling currents, as well as the optimization of these polarized currents in a sub-lattice, using potential barriers in metallic graphene ribbons. Using density of states maps, conductance results, and pseudo-spin polarization information (all of them as a function of the energy V and width of the barrier L), we found (V, L) intervals in which the polarized currents in a given sub-lattice are maximized. We also built parallel and series configurations with these barriers in order to further optimize the polarized currents. A systematic study of these maps and barrier configurations shows that the parallel configurations are good candidates for optimization of the polarized tunneling currents through the sub-lattice. Furthermore, we discuss the possibility of using an electrostatic potential as (i) a pseudo-spin filter or (ii) a pseudo-spin inversion manipulator, i.e. a possible latticetronic of electronic currents through metallic graphene ribbons. The results of this work can be extended to graphene nanostructures.

Left ventricular assist device implantation in a patient who had previously undergone apical myectomy for hypertrophic cardiomyopathy.

Science.gov (United States)

Cho, Yang Hyun; Deo, Salil V; Topilsky, Yan; Grogan, Martha A; Park, Soon J

2012-03-01

Apical hypertrophy is a rare variant of hypertropic cardiomyopathy. These patients may present with end-stage congestive heart failure subsequent to long standing diastolic dysfunction. We report the technique for left ventricular assist device insertion in a patient with previous apical myectomy for hypertrophic cardiomyopathy. © 2012 Wiley Periodicals, Inc.

Evaluation of Apical Vapor Lock Formation and comparative Evaluation of its Elimination using Three different Techniques: An in vitro Study.

Science.gov (United States)

Agarwal, Anand; Deore, Rahul B; Rudagi, Kavitarani; Nanda, Zinnie; Baig, Mirza Osman; Fareez, Md Adil

2017-09-01

The aim of this study was (i) to evaluate the formation of air bubbles in the apical region of root canal (apical vapor lock) during syringe irrigation, using cone beam computed tomography (CBCT) and (ii) comparative evaluation of the elimination of an established vapor lock by EndoActivator, ultrasonics, and manual dynamic agitation (MDA), using CBCT. A total of 60 extracted human single-rooted teeth were equally divided into three groups of 20 teeth each. The samples were decoronated 17 mm from the apex, cleaned, and shaped to size F4 Protaper using 3% sodium hypochlorite. Samples were irrigated with 3% sodium hypochlorite + cesium chloride radiopaque dye, and preoperative CBCT images were obtained. After formation of apical vapor lock in the scanned teeth, EndoActivator (group I), passive ultrasonic irrigation (group II), and MDA with K-file (group III) were performed and the teeth were again placed in CBCT scanner and results analyzed using the chi-square test. The apical vapor lock was formed in all the samples. Out of the 20 teeth in each group, the apical vapor lock was eliminated in 18 samples of EndoActivator group (90%), 16 samples of ultrasonic group (80%), while it was eliminated in 10 samples by MDA (50%). It is concluded that (1) apical vapor lock is consistently formed during endodontic irrigation in closed canal systems and (2) sonic activation performs better than the ultrasonics and MDA in eliminating the apical vapor lock, with statistically significant difference between all the three groups (p < 0.05). The results suggest that the apical vapor lock (dead water zone) is consistently formed during routine endodontic irrigation which impedes irrigant penetration till the working length, thereby leading to inefficient debridement. Hence, to eliminate this vapor lock, techniques, such as sonics or ultrasonics should be used along with the irrigant after shaping and cleaning of the root canal.

Effect of Instrumentation Length and Instrumentation Systems: Hand Versus Rotary Files on Apical Crack Formation – An In vitro Study

Science.gov (United States)

Mahesh, MC; Bhandary, Shreetha

2017-01-01

Introduction Stresses generated during root canal instrumentation have been reported to cause apical cracks. The smaller, less pronounced defects like cracks can later propagate into vertical root fracture, when the tooth is subjected to repeated stresses from endodontic or restorative procedures. Aim This study evaluated occurrence of apical cracks with stainless steel hand files, rotary NiTi RaCe and K3 files at two different instrumentation lengths. Materials and Methods In the present in vitro study, 60 mandibular premolars were mounted in resin blocks with simulated periodontal ligament. Apical 3 mm of the root surfaces were exposed and stained using India ink. Preoperative images of root apices were obtained at 100x using stereomicroscope. The teeth were divided into six groups of 10 each. First two groups were instrumented with stainless steel files, next two groups with rotary NiTi RaCe files and the last two groups with rotary NiTi K3 files. The instrumentation was carried out till the apical foramen (Working Length-WL) and 1 mm short of the apical foramen (WL-1) with each file system. After root canal instrumentation, postoperative images of root apices were obtained. Preoperative and postoperative images were compared and the occurrence of cracks was recorded. Descriptive statistical analysis and Chi-square tests were used to analyze the results. Results Apical root cracks were seen in 30%, 35% and 20% of teeth instrumented with K-files, RaCe files and K3 files respectively. There was no statistical significance among three instrumentation systems in the formation of apical cracks (p=0.563). Apical cracks were seen in 40% and 20% of teeth instrumented with K-files; 60% and 10% of teeth with RaCe files and 40% and 0% of teeth with K3 files at WL and WL-1 respectively. For groups instrumented with hand files there was no statistical significance in number of cracks at WL and WL-1 (p=0.628). But for teeth instrumented with RaCe files and K3 files

Determining the apical terminus of root-end resected teeth using three modern apex locators: a comparative ex vivo study.

Science.gov (United States)

ElAyouti, A; Kimionis, I; Chu, A-L; Löst, C

2005-11-01

To assess ex vivo the accuracy of various electronic apex locators in locating the apical terminus of root-end resected teeth. Ninety extracted human posterior teeth (182 root canals) were prepared to a minimum size of 40 and filled with gutta-percha and sealer. After resection of the apical 3 mm of the root, the root canal filling was removed using HERO rotary instruments. The size of the root canal at the apical terminus after removal of the filling ranged from size 50 to 90. The root canal length to the apical terminus was determined using 3 apex locators (Root ZX, Raypex4 and Apex Pointer). A new mounting model that utilized a micrometer was used to perform the measurements and to visually determine the actual position of the apical terminus. The frequency of locating the apical terminus and the corresponding 95% confidence interval (CI) were calculated. Additionally, the coefficient of repeatability of each apex locator and the limits of inter-operator agreement were determined. All apex locators showed an acceptable repeatability (0.02-0.03 mm coefficient of repeatability) and narrow limits of inter-operator agreement (+0.07 and -0.07 mm). The accuracy of determining the apical terminus within 1 mm in the root canal was as follows: Root ZX 90% (164/182 root-canals) [95%CI: 86-94%], Raypex4 74% (135/182 root-canals) [95%CI: 68-80%], and Apex Pointer 71% (129/182 root canals) [95%CI: 65-77%]. No over-instrumentation resulted when the Root ZX device was used. In contrast, using the Raypex4 or the Apex Pointer device resulted in over-instrumentation in 8 of 182 root canals (4%). Under the conditions of this study all three apex locators were able to detect the apical terminus of root-end resected teeth with an acceptable range. The Root ZX device was the most accurate without over-instrumentation of the root canals.

Orthograde retreatment failure with extruded MTA apical plug in a large periradicular lesion followed by surgical intervention: case report.

Science.gov (United States)

Brito-Junior, Manoel; Faria-e-Silva, Andre Luis; Quintino, Alex Carvalho; Moreira-Junior, Gil; Geber, Mauro; Camilo, Carla Cristina; Soares, Janir Alves

2012-01-01

Absence of periapical healing after orthograde retreatment using an apical plug with mineral trioxide aggregate (MTA) can require surgical intervention. A patient with a root-filled maxillary central incisor with chronic apical periodontitis and sinus tract was referred for endodontic retreatment. Excessive apical enlargement was verified, indicating an MTA apical plug placement; however, an unintentional extrusion of MTA occurred during this step. The root canal was filled with gutta-percha and sealer, and periodic recalls were scheduled. The sinus tract was observed after six months and the lesion remained unaltered, although the extruded MTA had resorbed; therefore, an apicoectomy and retrograde root-end filling with MTA were performed. Absence of sinus tract, normal clinical aspect, and complete repair of the lesion were observed at the two-year follow-up.

Protein kinase D1 modulates aldosterone-induced ENaC activity in a renal cortical collecting duct cell line.

LENUS (Irish Health Repository)

McEneaney, Victoria

2010-08-30

Aldosterone treatment of M1-CCD cells stimulated an increase in epithelial Na(+) channel (ENaC) alpha-subunit expression that was mainly localized to the apical membrane. PKD1-suppressed cells constitutively expressed ENaCalpha at low abundance, with no increase after aldosterone treatment. In the PKD1-suppressed cells, ENaCalpha was mainly localized proximal to the basolateral surface of the epithelium both before and after aldosterone treatment. Apical membrane insertion of ENaCbeta in response to aldosterone treatment was also sensitive to PKD1 suppression as was the aldosterone-induced rise in the amiloride-sensitive, trans-epithelial current (I(TE)). The interaction of the mineralocorticoid receptor (MR) with specific elements in the promoters of aldosterone responsive genes is stabilized by ligand interaction and phosphorylation. PKD1 suppression inhibited aldosterone-induced SGK-1 expression. The nuclear localization of MR was also blocked by PKD1 suppression and MEK antagonism implicating both these kinases in MR nuclear stabilization. PKD1 thus modulates aldosterone-induced ENaC activity through the modulation of sub-cellular trafficking and the stabilization of MR nuclear localization.

Effect of boron additions on phase formation and magnetic properties of TbCu7-type melt spun SmFe ribbons

International Nuclear Information System (INIS)

Zheng, Chuanjiang; Yu, Dunbo; Li, Kuoshe; Luo, Yang; Jin, Jinling; Lu, Shuo; Li, Hongwei; Mao, Yongjun; Quan, Ningtao

2016-01-01

Melt spun ribbons of a series of SmFe 12 B x (x=0.0, 0.5, 0.75, 1.0, 1.25, and 1.5) have been prepared by the melt spinning technique. Sm–Fe–B melt spun ribbons with single phase TbCu 7 -type structure were prepared from the SmFe 12 B x (x=0.5, 0.75, and 1.0) alloys at the surface velocity around 40 m/s. The addition of boron not only inhibits the appearance of soft magnetic phase α-Fe, but also enhances the ability of amorphous formation for melt spun Sm–Fe ribbons. The concentration of boron atoms, however, exceeds the limit of the solubility (x>1.0) of Sm–Fe alloys, which does not impede the appearance of α-Fe but accelerates the formation of metastable phase Sm 2 Fe 23 B 3 that is unfavorable to their magnetic properties. Moreover, it is found that the addition of boron whose concentration is 0.0≤x≤0.75 can stabilize the metastable TbCu 7 -type structure because of the increase of the lattice parameter ratio c/a. The magnetic properties of as-annealed SmFe 12 B 1.0 melt spun ribbons with an energy product of 2.19MGOe, a coercivity of 2.36 kOe and a remanence of 4.8 kGs have been achieved. The microstructural characteristics of as-annealed melt spun SmFe 12 and SmFe 12 B 1.0 ribbons have been discussed as well. The following sequence of the hyperfine field H(6l)

Capillary origami: superhydrophobic ribbon surfaces and liquid marbles

Directory of Open Access Journals (Sweden)

Glen McHale

2011-03-01

Full Text Available In the wetting of a solid by a liquid it is often assumed that the substrate is rigid. However, for an elastic substrate the rigidity depends on the cube of its thickness and so reduces rapidly as the substrate becomes thinner as it approaches becoming a thin sheet. In such circumstances, it has been shown that the capillary forces caused by a contacting droplet of a liquid can shape the solid rather than the solid shaping the liquid. A substrate can be bent and folded as a (pinned droplet evaporates or even instantaneously and spontaneously wrapped on contact with a droplet. When this effect is used to create three dimensional shapes from initially flat sheets, the effect is called capillary origami or droplet wrapping.In this work, we consider how the conditions for the spontaneous, capillary induced, folding of a thin ribbon substrate might be altered by a rigid surface structure that, for a rigid substrate, would be expected to create Cassie–Baxter and Wenzel effects. For smooth thin substrates, droplet wrapping can occur for all liquids, including those for which the Young’s law contact angle (defined by the interfacial tensions is greater than 90° and which would therefore normally be considered relatively hydrophobic. However, consideration of the balance between bending and interfacial energies suggests that the tendency for droplet wrapping can be suppressed for some liquids by providing the flexible solid surface with a rigid topographic structure. In general, it is known that when a liquid interacts with such a structure it can either fully penetrate the structure (the Wenzel case or it can bridge between the asperities of the structure (the Cassie–Baxter case.In this report, we show theoretically that droplet wrapping should occur with both types of solid–liquid contact. We also derive a condition for the transition between the Cassie–Baxter and Wenzel type droplet wrapping and relate it to the same transition condition

Electronic structure and trajectory control of Dirac fermions in graphene ribbons under the competition between electric and magnetic fields

International Nuclear Information System (INIS)

Yang, Mou; Cui, Yan; Wang, Rui-Qiang; Zhao, Hong-Bo

2012-01-01

We investigate the electronic structure of graphene ribbons under the competition between lateral electric and normal magnetic fields. The squeezing of quantum level spacings caused by either field is studied. Based on the knowledge of the dispersion under both fields, we analyze the electronic trajectories near the junctions of different electric and magnetic fields configurations. The junctions can split and join electron beams, and the conductance is quite robust against disorder near the junction interfaces. These junction devices can be used as bricks for building more complicated interference devices. -- Highlights: ► Unified physical picture of graphene ribbon under electric and magnetic fields is provided. ► Squeezing of level spacings caused by electric and magnetic fields is investigated. ► Graphene devices for electron beam split and joint are proposed.

Advanced dendritic web growth development and development of single-crystal silicon dendritic ribbon and high-efficiency solar cell program

Science.gov (United States)

Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.

1986-01-01

Efforts to demonstrate that the dendritic web technology is ready for commercial use by the end of 1986 continues. A commercial readiness goal involves improvements to crystal growth furnace throughput to demonstrate an area growth rate of greater than 15 sq cm/min while simultaneously growing 10 meters or more of ribbon under conditions of continuous melt replenishment. Continuous means that the silicon melt is being replenished at the same rate that it is being consumed by ribbon growth so that the melt level remains constant. Efforts continue on computer thermal modeling required to define high speed, low stress, continuous growth configurations; the study of convective effects in the molten silicon and growth furnace cover gas; on furnace component modifications; on web quality assessments; and on experimental growth activities.

Sodium coupled bicarbonate influx regulates intracellular and apical pH in cultured rat caput epididymal epithelium.

Science.gov (United States)

Zuo, Wu-Lin; Li, Sheng; Huang, Jie-Hong; Yang, Deng-Liang; Zhang, Geng; Chen, Si-Liang; Ruan, Ye-Chun; Ye, Ke-Nan; Cheng, Christopher H K; Zhou, Wen-Liang

2011-01-01

The epithelium lining the epididymis provides an optimal acidic fluid microenvironment in the epididymal tract that enable spermatozoa to complete the maturation process. The present study aims to investigate the functional role of Na(+)/HCO(3)(-) cotransporter in the pH regulation in rat epididymis. Immunofluorescence staining of pan cytokeratin in the primary culture of rat caput epididymal epithelium showed that the system was a suitable model for investigating the function of epididymal epithelium. Intracellular and apical pH were measured using the fluorescent pH sensitive probe carboxy-seminaphthorhodafluor-4F acetoxymethyl ester (SNARF-4F) and sparklet pH electrode respectively to explore the functional role of rat epididymal epithelium. In the HEPES buffered Krebs-Henseleit (KH) solution, the intracellular pH (pHi) recovery from NH(4)Cl induced acidification in the cultured caput epididymal epithelium was completely inhibited by amiloride, the inhibitor of Na(+)/H(+) exchanger (NHE). Immediately changing of the KH solution from HEPES buffered to HCO(3)(-) buffered would cause another pHi recovery. The pHi recovery in HCO(3)(-) buffered KH solution was inhibited by 4, 4diisothiocyanatostilbene-2,2-disulfonic acid (DIDS), the inhibitor of HCO(3)(-) transporter or by removal of extracellular Na(+). The extracellular pH measurement showed that the apical pH would increase when adding DIDS to the apical side of epididymal epithelial monolayer, however adding DIDS to the basolateral side had no effect on apical pH. The present study shows that sodium coupled bicarbonate influx regulates intracellular and apical pH in cultured caput epididymal epithelium.

Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear

Czech Academy of Sciences Publication Activity Database

Mrlik, M.; Sedlačík, M.; Pavlinek, V.; Bažant, P.; Sáha, P.; Peer, Petra; Filip, Petr

2013-01-01

Roč. 128, č. 5 (2013), s. 2977-2982 ISSN 0021-8995 Grant - others:GA MŠk(CZ) ED2.1.00/03.0111; UTB Zlín(CZ) IGA/1/FT/11/D Institutional support: RVO:67985874 Keywords : carbonyl iron * core - shell * magnetorheological fluid * polypyrrole * viscoelasticity * ribbon-like particles Subject RIV: BK - Fluid Dynamics Impact factor: 1.640, year: 2013

Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear

Czech Academy of Sciences Publication Activity Database

Mrlik, M.; Sedlačík, M.; Pavlinek, V.; Bažant, P.; Sáha, P.; Peer, Petra; Filip, Petr

2013-01-01

Roč. 128, č. 5 (2013), s. 2977-2982 ISSN 0021-8995 Grant - others:GA MŠk(CZ) ED2.1.00/03.0111; UTB Zlín(CZ) IGA/1/FT/11/D Institutional support: RVO:67985874 Keywords : carbonyl iron * core-shell * magnetorheological fluid * polypyrrole * viscoelasticity * ribbon-like particles Subject RIV: BK - Fluid Dynamics Impact factor: 1.640, year: 2013

C9/12 Ribbon-Like Structures in Hybrid Peptides Alternating α- and Thiazole-Based γ-Amino Acids.

Science.gov (United States)

Bonnel, Clément; Legrand, Baptiste; Simon, Matthieu; Martinez, Jean; Bantignies, Jean-Louis; Kang, Young Kee; Wenger, Emmanuel; Hoh, Francois; Masurier, Nicolas; Maillard, Ludovic T

2017-12-11

According to their restricted conformational freedom, heterocyclic γ-amino acids are usually considered to be related to Z-vinylogous γ-amino acids. In this context, oligomers alternating α-amino acids and thiazole-based γ-amino acids (ATCs) were expected to fold into a canonical 12-helical shape as described for α/γ-hybrid peptides composed of cis-α/β-unsaturated γ-amino acids. However, through a combination of X-ray crystallography, NMR spectroscopy, FTIR experiments, and DFT calculations, it was determined that the folding behavior of ATC-containing hybrid peptides is much more complex. The homochiral α/(S)-ATC sequences were unable to adopt a stable conformation, whereas the heterochiral α/(R)-ATC peptides displayed novel ribbon structures stabilized by unusual C 9/12 -bifurcated hydrogen bonds. These ribbon structures could be considered as a succession of pre-organized γ/α dipeptides and may provide the basis for designing original α-helix mimics. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dysregulation of Ca(v)1.4 channels disrupts the maturation of photoreceptor synaptic ribbons in congenital stationary night blindness type 2.

Science.gov (United States)

Liu, Xiaoni; Kerov, Vasily; Haeseleer, Françoise; Majumder, Anurima; Artemyev, Nikolai; Baker, Sheila A; Lee, Amy

2013-01-01

Mutations in the gene encoding Cav 1.4, CACNA1F, are associated with visual disorders including X-linked incomplete congenital stationary night blindness type 2 (CSNB2). In mice lacking Cav 1.4 channels, there are defects in the development of "ribbon" synapses formed between photoreceptors (PRs) and second-order neurons. However, many CSNB2 mutations disrupt the function rather than expression of Cav 1.4 channels. Whether defects in PR synapse development due to altered Cav 1.4 function are common features contributing to the pathogenesis of CSNB2 is unknown. To resolve this issue, we profiled changes in the subcellular distribution of Cav 1.4 channels and synapse morphology during development in wild-type (WT) mice and mouse models of CSNB2. Using Cav 1.4-selective antibodies, we found that Cav 1.4 channels associate with ribbon precursors early in development and are concentrated at both rod and cone PR synapses in the mature retina. In mouse models of CSNB2 in which the voltage-dependence of Cav 1.4 activation is either enhanced (Cav 1.4I756T) or inhibited (CaBP4 KO), the initial stages of PR synaptic ribbon formation are largely unaffected. However, after postnatal day 13, many PR ribbons retain the immature morphology. This synaptic abnormality corresponds in severity to the defect in synaptic transmission in the adult mutant mice, suggesting that lack of sufficient mature synapses contributes to vision impairment in Cav 1.4I756T and CaBP4 KO mice. Our results demonstrate the importance of proper Cav 1.4 function for efficient PR synapse maturation, and that dysregulation of Cav 1.4 channels in CSNB2 may have synaptopathic consequences.

Comparison of apical centring ability between incisal-shifted access and traditional lingual access for maxillary anterior teeth.

Science.gov (United States)

Yahata, Yoshio; Masuda, Yoshiko; Komabayashi, Takashi

2017-12-01

The aim of this study was to compare the apical centring ability of incisal-shifted access (ISA) with that of traditional lingual access (TLA). Fifteen three-dimensional printed resin models were prepared from the computed tomography data for a human maxillary central incisor and divided into ISA (n = 7), TLA (n = 7) and control (n = 1) groups. After access preparation, these models were shaped to the working length using K-files up to #40, followed by step-back procedures. An apical portion of the model was removed at 0.5 mm coronal to the working length. Microscopic images of each cutting surface were taken to measure the preparation area and the distance of transportation. TLA created a larger preparation area than ISA (P < 0.05). The distance of transportation (mean ± standard deviation) was 0.4 ± 0.1 mm for ISA and 0.7 ± 0.1 mm for TLA (P < 0.05). Access cavity preparation has a significant effect on apical centring ability. ISA is beneficial to maintaining apical configuration. © 2017 Australian Society of Endodontology Inc.

A cone-beam computed tomography study of orthodontic apical root resorption

Directory of Open Access Journals (Sweden)

Jian-Hong Yu

2013-03-01

Conclusion: Results show that larger tooth movement after orthodontic treatment may be associated with increased severity of root resorption. This study has demonstrated that CBCT is a useful approach for evaluating apical root resorption after orthodontic treatment.

Non-apical positive surgical margins after radical prostatectomy for pT2 prostate cancer is associated with the highest risk of recurrence

DEFF Research Database (Denmark)

Roder, Martin Andreas; Kawa, Sandra; Scheike, Thomas

2014-01-01

BACKGROUND AND OBJECTIVE: To investigate how location of positive surgical margins (PSM) in pT2 tumors affect the risk of biochemical recurrence (BR). METHODS: The study includes 1,133 consecutive patients from 1995 until end of 2011, who had organ-confined disease (pT2) following RP. The location...... a 3.1-fold increased risk of BR compared to margin negative patients. Patients with pT2 apical and non-apical PSM had a 5-year biochemical recurrence-free survival of 84.9% (95% CI: 77.6-92.2%) and 78.6% (95% CI: 71.3-85.9%), respectively. In multivariate analysis, pT2 apical and non-apical PSM...... was individually associated with a 2.2- and 3.8-fold increased risk of BR compared to margin negative patients. CONCLUSION: In our cohort the location of pT2 PSM was associated with time to BR, that is, patients with non-apical pT2 PSM endured the highest risk of BR compared to apical PSM. This may indicate...

Gradenigo’s Syndrome in a Patient with Chronic Suppurative Otitis Media, Petrous Apicitis, and Meningitis

Science.gov (United States)

Taklalsingh, Nicholas; Falcone, Franco; Velayudhan, Vinodkumar

2017-01-01

Patient: Male, 58 Final Diagnosis: Bacterial meningitis Symptoms: Altered mental status • headache • neck stiffness • vomiting Medication: — Clinical Procedure: — Specialty: Infectious Diseases Objective: Rare disease Background: Gradenigo’s syndrome includes the triad of suppurative otitis media, ipsilateral sixth (abducens) cranial nerve palsy and facial pain in the distribution of the fifth (trigeminal) cranial nerve. Gradenigo’s syndrome is rare, and the diagnosis is easily overlooked. This case is the first to report Gradenigo’s syndrome presenting with meningitis on a background of chronic suppurative otitis media (CSOM) and petrous apicitis (apical petrositis). Case Report: A 58-year-old male African American presented with headaches and confusion. Magnetic resonance imaging (MRI) of the head showed petrous apicitis with mastoiditis and abscess formation in the cerebellomedullary cistern (cisterna magna). The case was complicated by the development of palsy of the fourth (trochlear) cranial nerve, fifth (trigeminal) cranial nerve, and sixth (abducens) cranial nerve, with radiological changes indicating infection involving the seventh (facial) cranial nerve, and eighth (vestibulocochlear) cranial nerve. Cerebrospinal fluid (CSF) culture results were positive for Klebsiella pneumoniae, sensitive to ceftriaxone. The patient improved with surgery that included a left mastoidectomy and debridement of the petrous apex, followed by a ten-week course of antibiotics. Follow-up MRI showed resolution of the infection. Conclusions: This report is of an atypical case of Gradenigo’s syndrome. It is important to recognize that the classical triad of Gradenigo’s syndrome, suppurative otitis media, ipsilateral sixth (abducens) cranial nerve palsy and facial pain in the distribution of the fifth (trigeminal) cranial nerve, may also involve chronic suppurative otitis media (CSOM), which may lead to involvement of other cranial nerves, petrous apicitis

Ribbon-wise customized lingual appliance and orthodontic anchor screw for the treatment of skeletal high-angle maxillary protrusion without bowing effect.

Science.gov (United States)

Inami, Toru; Ito, Goshi; Miyazawa, Ken; Tabuchi, Masako; Goto, Shigemi

2018-05-02

This case report demonstrates the treatment of a skeletal Class II high-angle adult patient with bimaxillary protrusion, angle Class I occlusion, and crowded anterior teeth. A ribbon-wise arch wire and a customized lingual appliance with anterior vertical slots were used to achieve proper torque control of the maxillary anterior teeth. An orthodontic anchor screw and a palatal bar were used for vertical control to avoid increasing the Frankfort-mandibular plane angle (FMA) by maxillary molar extrusion. Through the combined use of the ribbon-wise customized lingual appliance, palatal bar, and orthodontic anchor screw, vertical control and an excellent treatment result were achieved without the vertical and horizontal bowing effects peculiar to conventional lingual treatment.

Microflora of root filled teeth with apical periodontitis in Latvian patients.

Science.gov (United States)

Mindere, Anda; Kundzina, Rita; Nikolajeva, Vizma; Eze, Daina; Petrina, Zaiga

2010-01-01

The aim of the present study was to investigate the microbial flora of root filled teeth with apical periodontitis and to determine the prevalence of β-lactamase producing strains in isolated bacteria in Latvian patients. 33 root filled teeth with asymptomatic persisting periapical lesions were selected for the present study. During nonsurgical endodontic retreatment, the root filling material was removed and canals were sampled. Determination of microbial species was based on series of biochemical tests using identification kits. All strains of bacteria were tested for β-lactamase production by using chromogenic nitrocefin-impregnated slides. Bacteria were found in 32 (97%) of initial specimens from the teeth. The number of isolated microbial strains in the specimens ranged from one to six (mean 2.7). 79% of the isolated microbial species were Gram-positive bacteria. The most common isolates were Streptococcus (27%), Actinomyces (27%), Staphylococcus (18%), Enterococcus (18%) and Lactobacillus (18%) spp. Yeasts were found as four isolates in 3 cases (9%). β-lactamase-producing bacterial strains were detected in 12 specimens, 36% of the patients. The most common enzyme-producing bacteria belonged to Actinomyces and Staphylococcus spp. The microbial flora in previously treated root canals with apical periodontitis is limited to a small number of predominantly Gram-positive microbial species. The most common isolates are Streptococcus, Actinomyces, Staphylococcus, Enterococcus and Lactobacillus spp. A moderately high prevalence of β-lactamase producing bacterial strains was detected in patients with root filled teeth with apical periodontitis.

Effect of photon-initiated photoacoustic streaming on removal of apically placed dentinal debris.

Science.gov (United States)

Arslan, H; Capar, I D; Saygili, G; Gok, T; Akcay, M

2014-11-01

To compare the efficacy of photon-induced photoacoustic streaming (PIPS) technique with conventional, sonic and ultrasonic irrigation on the removal of apically placed dentinal debris from an artificial groove created in a root canal. Root canal preparation was performed up to size 40 on 48 extracted single-rooted teeth using ProTaper rotary instruments. The specimens were then split longitudinally, and a standardized groove was prepared in the apical part of each segment. Each groove was filled with dentinal debris mixed with 5% NaOCl. Each tooth was reassembled and irrigated as follows: (i) conventional irrigation with 1% NaOCl, (ii) sonic, (iii) ultrasonic irrigation, and (iv) PIPS. The root segments were disassembled, and the amount of remaining dentinal debris was evaluated under a stereomicroscope at 20× magnification, using a four-grade scoring system. The data were evaluated statistically using Kruskal-Wallis and Mann-Whitney U-tests with a 95% confidence level (P = 0.05). Photon-induced photoacoustic streaming removed significantly more dentinal debris than conventional irrigation (P streaming was more effective than conventional, sonic and ultrasonic irrigation in the removal of apically placed dentinal debris. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Comparison of apical transportation and change of working length in K3, NRT AND PROFILE rotary instruments using transparent resin block

Directory of Open Access Journals (Sweden)

Min-Jung Yoon

2011-01-01

Full Text Available Objectives The purpose of this study is to compare the apical transportation and working length change in curved root canals created in resin blocks, using 3 geometrically different types of Ni-Ti files, K3, NRT, and Profile. Materials and Methods The curvature of 30 resin blocks was measured by Schneider technique and each groups of Ni-Ti files were allocated with 10 resin blocks at random. The canals were shaped with Ni-Ti files by Crown-down technique. It was analyzed by Double radiograph superimposition method (Backman CA 1992, and for the accuracy and consistency, specially designed jig, digital X-ray, and CAD/CAM software for measurement of apical transportation were used. The amount of apical transportation was measured at 0, 1, 3, 5 mm from 'apical foramen - 0.5 mm' area, and the alteration of the working length before and after canal shaping was also measured. For statistics, Kruskal-Wallis One Way Analysis was used. Results There was no significant difference between the groups in the amount of working length change and apical transportation at 0, 1, and 3 mm area (p = 0.027, however, the amount of apical transportation at 5 mm area showed significant difference between K3 and Profile system (p = 0.924. Conclusions As a result of this study, the 3 geometrically different Ni-Ti files showed no significant difference in apical transportation and working length change and maintained the original root canal shape.

Steroidal Ribbons from (3 alpha,5 beta,20S)-3-Hycloxy-20-Methyl-Pregnan-21-oic Acid

Czech Academy of Sciences Publication Activity Database

Sperduto, C.; Smolková, M.; Jurášek, M.; Malachowska, M.; Venanzi, M.; Monti, D.; Mancini, G.; Wimmer, Zdeněk; Drašar, P.

2016-01-01

Roč. 13, č. 10 (2016), s. 711-717 ISSN 1570-1786 Institutional support: RVO:61389030 Keywords : etienic acid * amide bond * copper * networks * gelators * analogs * Aggregation * steroids ribbons * side chain shortening * supramolecular chemistry Subject RIV: CC - Organic Chemistry Impact factor: 0.730, year: 2016 http://www.eurekaselect.com/147510

Thermodynamic evidence for cluster ordering in Cu46Zr42Al7Y5 ribbons during glass transition

DEFF Research Database (Denmark)

Zheng, H.J.; Lv, Y.M.; Sun, Q.J.

2016-01-01

This work investigated the response of Cu46Zr42Al7Y5 glass ribbons to both dynamic and static heating using differential scanning calorimeter (DSC). The DSC curve manifests three exothermic responses to dynamic heating, among which the first and the third one are the signatures of the normal sub......-Tg (Tg, glass transition temperature) relaxation and the crystallization process, respectively. The second one is attributed to a partial overlap between the endothermic response to the glass transition and the exothermic response to the formation of ordered clusters. The cluster ordering, which begins...... at the final stage of glass transition, has been verified by the differences in the activation energy of the sub-Tg relaxation, the cluster ordering and primary crystallization for both the as-spun and annealed ribbons. The cluster ordering could be driven by the large difference between the Zr–Y mixing...

Morphdynamics of Beaches in the Tróia-Sines Littoral Ribbon (SW Portugal)

OpenAIRE

Gama, Cristina; Andrade, César; Taborda, Rui; Freitas, Conceição

2006-01-01

In the Tróia-Sines littoral ribbon five beaches were monitored in order to evaluate morphological and textural changes. The textural analysis reveals a southward coarsening trend that reflects an increase in the wave energy. The morphodynamic data indicate that the modal stages are intermediate to reflective, and that the available beach volume increases southwards. During storm periods the volumetric changes reach 15% to 82% of the beach envelope corresponding to magnitudes of 6x10 3 to 2x10...

Cellular internalization, transcellular transport, and cellular effects of silver nanoparticles in polarized Caco-2 cells following apical or basolateral exposure

International Nuclear Information System (INIS)

Imai, Shunji; Morishita, Yuki; Hata, Tomoyuki; Kondoh, Masuo; Yagi, Kiyohito; Gao, Jian-Qing; Nagano, Kazuya; Higashisaka, Kazuma; Yoshioka, Yasuo; Tsutsumi, Yasuo

2017-01-01

When considering the safety of ingested nanomaterials, it is important to quantitate their transfer across intestinal cells; however, little information exists about the effects of nanomaterial size or exposure side (apical versus basolateral epithelial surface) on nanomaterial transfer. Here, we examined cellular internalization and transcellular transport, and the effects of nanomaterials on Caco-2 monolayers after apical or basolateral exposure to Ag or Au nanoparticles with various sizes. After apical treatment, both internalization and transfer to the basolateral side of the monolayers were greater for smaller Ag nanoparticles than for larger Ag nanoparticles. In contrast, after basolateral treatment, larger Ag nanoparticles were more internalized than smaller Ag nanoparticles, but the transfer to the apical side was greater for smaller Ag nanoparticles. Au nanoparticles showed different rules of internalization and transcellular transport compared with Ag nanoparticles. Furthermore, the paracellular permeability of the Caco-2 monolayers was temporarily increased by Ag nanoparticles (5 μg/mL; diameters, ≤10 nm) following basolateral but not apical exposure. We conclude that the internalization, transfer, and effects of nanomaterials in epithelial cell monolayers depend on the size and composition of nanomaterials, and the exposure side. - Highlights: • Ag and Au nanoparticles can transfer across Caco-2 monolayers. • Cellular uptake of nanoparticles change between apical and basolateral exposure. • Basolateral Ag nanoparticle exposure increases the permeability of Caco-2 monolayers.

Apical extrusion of debris after hand, engine-driven reciprocating and continuous preparation = Extrusão apical de “debris” após o preparo manual e mecanizado oscilatório e contínuo

Directory of Open Access Journals (Sweden)

Luisi, Simone Bonato

2010-01-01

Conclusão: A técnica rotatória contínua com Pro-taper produziu maior quantidade de extrusão apical do que as técnicas coroa-ápice manual e mecanizada com sistema de rotação oscilatória. A direção da instrumentação, se cérvico-apical ou ápico-cervical, parece ser o fator mais determinante na extrusão de “debris” independente desta ser realizada manual ou mecanizada

A Quantitative Examination of the Educational Technology Characteristics of Ohio Schools and Their Blue Ribbon Status

Science.gov (United States)

Goon, Dean A.

2012-01-01

The purpose of this study was to analyze data from Ohio schools and the frequency of use of educational technology, a teacher's comfort level using technology, and a teacher's beliefs about the effect of educational technology on teaching and learning based upon the school's Blue Ribbon award status. The study used an ex-post facto, quantitative…

Integrins beta 5, beta 3 and alpha v are apically distributed in endometrial epithelium.

Science.gov (United States)

Aplin, J D; Spanswick, C; Behzad, F; Kimber, S J; Vićovac, L

1996-07-01

Several adhesion molecules have been shown to occur at the surface of endometrial cells. One of these is the integrin alpha v subunit which associates with various beta chains including beta 5. We demonstrate the presence of integrin beta 5 polypeptide in human endometrial epithelial cells throughout the menstrual cycle using immunocytochemistry with monospecific antibodies, and at the mRNA level by thermal amplification from endometrial cDNA. Integrin beta 5 is also found in a population of bone marrow-derived cells. A notable feature of the distribution of the beta 5 subunit in the glandular and luminal epithelium is its apical localization, which may suggest an involvement in implantation. However, no evidence was found for regulated expression of epithelial beta 5. In mouse, the beta 5 subunit is found at both the apical and basal surface of epithelial cells and expression is essentially oestrous cycle-independent. Comparisons are made in both species with the distribution of the alpha v and beta 3 subunits which also localize to the apical epithelium.

Modulation of iridovirus-induced apoptosis by endocytosis, early expression, JNK, and apical caspase

International Nuclear Information System (INIS)

Chitnis, Nilesh S.; D'Costa, Susan M.; Paul, Eric R.; Bilimoria, Shaen L.

2008-01-01

Chilo iridescent virus (CIV) is the type species for the family Iridoviridae, which are large, isometric, cytoplasmic dsDNA viruses. We examined the mechanism of apoptosis induction by CIV. High CIV doses (CIV XS ; 400 μg/ml), UV-irradiated virus (CIV UV ; 10 μg/ml) and CVPE (CIV protein extract; 10 μg/ml) induced apoptosis in 60% of treated Choristoneura fumiferana (IPRI-CF-124T) cells. Normal doses of infectious CIV (10 μg/ml) induced apoptosis in only 10% of C. fumiferana (CF) cells. Apoptosis was inhibited by Z-IETD-FMK, an apical caspase inhibitor, indicating that CIV-induced apoptosis requires caspase activity. The putative caspase in CF cells was designated Cf-caspase-i. CIV UV or CVPE enhanced Cf-caspase-i activity by 80% at 24 h relative to mock-treated cells. Since the MAP kinase pathway induces or inhibits apoptosis depending on the context, we used JNK inhibitor SP600125 and demonstrated drastic suppression of CVPE-induced apoptosis. Thus, the JNK signaling pathway is significant for apoptosis in this system. Virus interaction with the cell surface was not sufficient for apoptosis since CIV UV particles bound to polysterene beads failed to induce apoptosis. Endocytosis inhibitors (bafilomycin or ammonium chloride) negated apoptosis induction by CIV UV , CIV XS or CVPE indicating that entry through this mode is required. Given the weak apoptotic response to infectious CIV, we postulated that viral gene expression inhibited apoptosis. CIV infection of cells pretreated with cycloheximide induced apoptosis in 69% of the cells compared to 10% in normal infections. Furthermore, blocking viral DNA replication with aphidicolin or phosphonoacetic acid suppressed apoptosis and Cf-caspase-i activity, indicating that early viral expression is necessary for inhibition of apoptosis, and de novo synthesis of viral proteins is not required for induction. We show for the first time that, in a member of the family Iridoviridae, apoptosis: (i) requires entry and

Protein modeling of apical membrane antigen-1(AMA-1) of ...

African Journals Online (AJOL)

Apical membrane Antigen-1(AMA-1), an asexual blood stage antigen of Plasmodium cynomolgi, is an important candidate for testing as a component of malarial vaccine. The degree of conservation of. AMA-1 sequences implies a conserved function for this molecule across different species of Plasmodium. Since the AMA-1 ...

Single Versus Multi‑visit Endodontic Treatment of Teeth with Apical ...

African Journals Online (AJOL)

Background: Apical periodontitis (AP) is one of the most prevalent diseases of the teeth. Treatment of AP is based on the removal of the cause, i.e., bacteria from the root canals. Achievement of adequate bacterial eradication in one appointment treatment remains a controversy. Aim: This prospective study was conducted ...

CASE OF DIAGNOSIS OF APICAL FORM OF HYPERTROPHIC CARDIOMYOPATHY WITH A PATIENT WITH PROGRESSIVE ANGINA CLINIC

Directory of Open Access Journals (Sweden)

N. S. Krylova

2015-01-01

Full Text Available Objective of work: to describe the apical form of hypertrophic cardiomyopathy (AFHC developing under the "mask" of the ischemic heart disease not diagnosed for a long period.Materials and methods. Patient B., 73 y.o., female, was brought to the cardiology department with complains of severe pressing pain behind the breastbone caused with no apparent reason and lasting for over 4 hours. The following examination of the patient was performed: electrocardiography (ECG, echocardiography (EchoCG, Holter ECG monitoring, coronary angiography (CAG, ventriculography.Results. The final diagnosis for the patient was set on the basis of the following readings: ECG data (basic rhythm – atrial fibrillation, left ventricle (LV hypertrophy, negative T-waves in leads V1–6, ST segment depression up to 1–2 mm in leads V4–6, EchoCG (hypertrophy of apical segments of the LV with decreasing of its cavity, moderate dilatation of the left atrium, intraventricular obstruction in the apical third of the LV with the maximum pressure gradient of up to 48 mm Hg., CAG (stenotic lesions of coronary arteries were found, ventriculography (LV volume is not increased, no violations of local contractility, narrowing of the LV cavity in the lower third is observed with thinning in the apex, which indicatesexpressed apical hypertrophy of the LV myocard. AFHC, apical form with moderate obstruction in the lower third of the left ventricle. Stress angina syndrome. CAG and ventriculography were main diagnostic methods that allowed setting the final diagnosis.Conclusion. The clinical case sets forth the peculiarities of diagnostics, therapy, and post-therapy management of patients with this form of AFHC.

Sodium coupled bicarbonate influx regulates intracellular and apical pH in cultured rat caput epididymal epithelium.

Directory of Open Access Journals (Sweden)

Wu-Lin Zuo

Full Text Available The epithelium lining the epididymis provides an optimal acidic fluid microenvironment in the epididymal tract that enable spermatozoa to complete the maturation process. The present study aims to investigate the functional role of Na(+/HCO(3(- cotransporter in the pH regulation in rat epididymis.Immunofluorescence staining of pan cytokeratin in the primary culture of rat caput epididymal epithelium showed that the system was a suitable model for investigating the function of epididymal epithelium. Intracellular and apical pH were measured using the fluorescent pH sensitive probe carboxy-seminaphthorhodafluor-4F acetoxymethyl ester (SNARF-4F and sparklet pH electrode respectively to explore the functional role of rat epididymal epithelium. In the HEPES buffered Krebs-Henseleit (KH solution, the intracellular pH (pHi recovery from NH(4Cl induced acidification in the cultured caput epididymal epithelium was completely inhibited by amiloride, the inhibitor of Na(+/H(+ exchanger (NHE. Immediately changing of the KH solution from HEPES buffered to HCO(3(- buffered would cause another pHi recovery. The pHi recovery in HCO(3(- buffered KH solution was inhibited by 4, 4diisothiocyanatostilbene-2,2-disulfonic acid (DIDS, the inhibitor of HCO(3(- transporter or by removal of extracellular Na(+. The extracellular pH measurement showed that the apical pH would increase when adding DIDS to the apical side of epididymal epithelial monolayer, however adding DIDS to the basolateral side had no effect on apical pH.The present study shows that sodium coupled bicarbonate influx regulates intracellular and apical pH in cultured caput epididymal epithelium.

Nonsurgical management of an extensive endodontic lesion in an orthodontic patient by calcium-enriched mixture apical plug

Directory of Open Access Journals (Sweden)

Saeed Asgary

2014-01-01

Full Text Available Periapical lesion is a general term used to describe the periapical inflammatory process that occurs in response to the invasion of micro-organisms in the root canal system as well as inflamed vital pulp. This phenomenon necessitates endodontic intervention and if the necrosis has occurred prior to tooth maturation, wide patency of the apical foramen requires some treatment modalities such as apexification or apical plug. Orthodontic treatment, on the other hand, is cautiously done for previously traumatized teeth due to increased risk for necrosis of the compromised tooth. This article tends to review the successful treatment process with calcium-enriched mixture (CEM cement apical plug for an immature previously traumatized incisor tooth with an extensive periapical lesion, which was under orthodontic treatment as well.

Effect of prenatal phenytion exposure on the apical ectodermal ridges of chick wing buds

International Nuclear Information System (INIS)

Afzal, F.; Raza, S.; Shafique, M.

2017-01-01

Objective: To observe the effect of sodium phenytoin on the development of the apical ectodermal ridges (AER) in chick wing buds. Study Design: Laboratory based case-control study. Place and Duration of Study: This study was carried out at the Department of Anatomy located at the Regional Center of College of Physicians and Surgeons Islamabad Pakistan, from Jan 2014 to Jan 2015. Material and Methods: Sixty fertilized chicken eggs of 'Egyptian fayoumi' breed were selected and divided into two subgroups, experimental and control, each having 30 eggs. A single dose of 3.5 mg sodium phenytoin was injected in each egg of the experimental subgroup while controls were administered same volume of normal saline. The embryos were extracted 96 hours (day 4) after incubation. Histological sections were cut at 5 micro m thickness and stained with Feulgen Nuclear and Light Green to measure the maximum thickness of the apical ectodermal ridges. The number of cells and mitoses in each ridges were also counted. SPSS 16 was used for statistical analysis. Results: There was no significant difference between experimental and control subgroups regarding the maximum thickness and number of cells in the apical ectodermal ridge but there was a statistically significant reduction in the number of mitoses in the experimental ridges. Conclusion: The study shows that sodium phenytoin exerts an inhibitory effect on the apical ectodermal ridges of developing limbs evident by the decreased number of mitoses in the AER of wing buds of experimental chick embryos making it a potential target site for limb teratogenicity associated with its maternal intake during pregnancy. (author)

Apical groove type and molecular phylogeny suggests reclassification of Cochlodinium geminatum as Polykrikos geminatum.

Science.gov (United States)

Qiu, Dajun; Huang, Liangmin; Liu, Sheng; Zhang, Huan; Lin, Senjie

2013-01-01

Traditionally Cocholodinium and Gymnodinium sensu lato clade are distinguished based on the cingulum turn number, which has been increasingly recognized to be inadequate for Gymnodiniales genus classification. This has been improved by the combination of the apical groove characteristics and molecular phylogeny, which has led to the erection of several new genera (Takayama, Akashiwo, Karenia, and Karlodinium). Taking the apical groove characteristics and molecular phylogeny combined approach, we reexamined the historically taxonomically uncertain species Cochlodinium geminatum that formed massive blooms in Pearl River Estuary, China, in recent years. Samples were collected from a bloom in 2011 for morphological, characteristic pigment, and molecular analyses. We found that the cingulum in this species wraps around the cell body about 1.2 turns on average but can appear under the light microscopy to be >1.5 turns after the cells have been preserved. The shape of its apical groove, however, was stably an open-ended anticlockwise loop of kidney bean shape, similar to that of Polykrikos. Furthermore, the molecular phylogenetic analysis using 18S rRNA-ITS-28S rRNA gene cistron we obtained in this study also consistently placed this species closest to Polykrikos within the Gymnodinium sensu stricto clade and set it far separated from the clade of Cochlodinium. These results suggest that this species should be transferred to Polykrikos as Polykrikos geminatum. Our results reiterate the need to use the combination of apical groove morphology and molecular phylogeny for the classification of species within the genus of Cochlodinium and other Gymnodiniales lineages.

Apical groove type and molecular phylogeny suggests reclassification of Cochlodinium geminatum as Polykrikos geminatum.

Directory of Open Access Journals (Sweden)

Dajun Qiu

Full Text Available Traditionally Cocholodinium and Gymnodinium sensu lato clade are distinguished based on the cingulum turn number, which has been increasingly recognized to be inadequate for Gymnodiniales genus classification. This has been improved by the combination of the apical groove characteristics and molecular phylogeny, which has led to the erection of several new genera (Takayama, Akashiwo, Karenia, and Karlodinium. Taking the apical groove characteristics and molecular phylogeny combined approach, we reexamined the historically taxonomically uncertain species Cochlodinium geminatum that formed massive blooms in Pearl River Estuary, China, in recent years. Samples were collected from a bloom in 2011 for morphological, characteristic pigment, and molecular analyses. We found that the cingulum in this species wraps around the cell body about 1.2 turns on average but can appear under the light microscopy to be >1.5 turns after the cells have been preserved. The shape of its apical groove, however, was stably an open-ended anticlockwise loop of kidney bean shape, similar to that of Polykrikos. Furthermore, the molecular phylogenetic analysis using 18S rRNA-ITS-28S rRNA gene cistron we obtained in this study also consistently placed this species closest to Polykrikos within the Gymnodinium sensu stricto clade and set it far separated from the clade of Cochlodinium. These results suggest that this species should be transferred to Polykrikos as Polykrikos geminatum. Our results reiterate the need to use the combination of apical groove morphology and molecular phylogeny for the classification of species within the genus of Cochlodinium and other Gymnodiniales lineages.

Effect of boron additions on phase formation and magnetic properties of TbCu{sub 7}-type melt spun SmFe ribbons

Energy Technology Data Exchange (ETDEWEB)

Zheng, Chuanjiang; Yu, Dunbo, E-mail: yudb2008@126.com; Li, Kuoshe; Luo, Yang; Jin, Jinling; Lu, Shuo; Li, Hongwei; Mao, Yongjun; Quan, Ningtao

2016-08-15

Melt spun ribbons of a series of SmFe{sub 12}B{sub x} (x=0.0, 0.5, 0.75, 1.0, 1.25, and 1.5) have been prepared by the melt spinning technique. Sm–Fe–B melt spun ribbons with single phase TbCu{sub 7}-type structure were prepared from the SmFe{sub 12}B{sub x} (x=0.5, 0.75, and 1.0) alloys at the surface velocity around 40 m/s. The addition of boron not only inhibits the appearance of soft magnetic phase α-Fe, but also enhances the ability of amorphous formation for melt spun Sm–Fe ribbons. The concentration of boron atoms, however, exceeds the limit of the solubility (x>1.0) of Sm–Fe alloys, which does not impede the appearance of α-Fe but accelerates the formation of metastable phase Sm{sub 2}Fe{sub 23}B{sub 3} that is unfavorable to their magnetic properties. Moreover, it is found that the addition of boron whose concentration is 0.0≤x≤0.75 can stabilize the metastable TbCu{sub 7}-type structure because of the increase of the lattice parameter ratio c/a. The magnetic properties of as-annealed SmFe{sub 12}B{sub 1.0} melt spun ribbons with an energy product of 2.19MGOe, a coercivity of 2.36 kOe and a remanence of 4.8 kGs have been achieved. The microstructural characteristics of as-annealed melt spun SmFe{sub 12} and SmFe{sub 12}B{sub 1.0} ribbons have been discussed as well. The following sequence of the hyperfine field H(6l)

FISHing for gutta-percha-adhered biofilms in purulent post-treatment apical periodontitis.

Science.gov (United States)

Zehnder, M; Rechenberg, D-K; Thurnheer, T; Lüthi-Schaller, H; Belibasakis, G N

2017-06-01

This study investigated the possibility of depicting individual taxa in clinically relevant biofilms using fluorescent in situ hybridization (FISH). Gutta-percha samples were collected from the apical aspect of root canals associated with a chronic apical abscess (test samples, n = 8). Corresponding control samples were obtained from previously filled root canals with apparently normal periapical tissues (n = 3). The transport medium was investigated for detached biofilm fragments using FISH staining and conventional epifluorescence microscopy. Gutta-percha samples were stained by multiplex FISH, and inspected using confocal laser scanning microscopy. FISH of the transport medium confirmed the presence of the main species formerly identified by conventional methods in post-treatment purulent endodontic infections, most prominently Fusobacterium spp., Bacteroidetes and Prevotellaceae. Treponemes were identified in five of eight cases associated with purulent infections, but Enterococcus faecalis and Staphylococcus spp. were not identified. The biofilms on gutta-percha from root canals associated with apical periodontitis showed dense aggregates of variable composition. Control samples contained few, if any, bacteria in the transport medium, and featured no biofilms on the respective gutta-percha specimens. The current study revealed some direct, visual in situ information on the nature of biofilms associated with purulent periapical infections in man. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.