WorldWideScience

Sample records for rfid network design

  1. Design of a covert RFID tag network for target discovery and target information routing.

    Science.gov (United States)

    Pan, Qihe; Narayanan, Ram M

    2011-01-01

    Radio frequency identification (RFID) tags are small electronic devices working in the radio frequency range. They use wireless radio communications to automatically identify objects or people without the need for line-of-sight or contact, and are widely used in inventory tracking, object location, environmental monitoring. This paper presents a design of a covert RFID tag network for target discovery and target information routing. In the design, a static or very slowly moving target in the field of RFID tags transmits a distinct pseudo-noise signal, and the RFID tags in the network collect the target information and route it to the command center. A map of each RFID tag's location is saved at command center, which can determine where a RFID tag is located based on each RFID tag's ID. We propose the target information collection method with target association and clustering, and we also propose the information routing algorithm within the RFID tag network. The design and operation of the proposed algorithms are illustrated through examples. Simulation results demonstrate the effectiveness of the design.

  2. Managing RFID Sensors Networks with a General Purpose RFID Middleware

    Science.gov (United States)

    Abad, Ismael; Cerrada, Carlos; Cerrada, Jose A.; Heradio, Rubén; Valero, Enrique

    2012-01-01

    RFID middleware is anticipated to one of the main research areas in the field of RFID applications in the near future. The Data EPC Acquisition System (DEPCAS) is an original proposal designed by our group to transfer and apply fundamental ideas from System and Data Acquisition (SCADA) systems into the areas of RFID acquisition, processing and distribution systems. In this paper we focus on how to organize and manage generic RFID sensors (edge readers, readers, PLCs, etc…) inside the DEPCAS middleware. We denote by RFID Sensors Networks Management (RSNM) this part of DEPCAS, which is built on top of two new concepts introduced and developed in this work: MARC (Minimum Access Reader Command) and RRTL (RFID Reader Topology Language). MARC is an abstraction layer used to hide heterogeneous devices inside a homogeneous acquisition network. RRTL is a language to define RFID Reader networks and to describe the relationship between them (concentrator, peer to peer, master/submaster). PMID:22969370

  3. Introduction of circuit design on RFID system

    International Nuclear Information System (INIS)

    Pak, Sunho

    2007-06-01

    This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

  4. Introduction of circuit design on RFID system

    Energy Technology Data Exchange (ETDEWEB)

    Pak, Sunho

    2007-06-15

    This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

  5. Design of a Child Localization System on RFID and Wireless Sensor Networks

    OpenAIRE

    Chen, Chao

    2010-01-01

    Radio Frequency Identification (RFID) and wireless sensor networks are wireless technologies that rapidly emerge and show great potential. Combining RFID and wireless sensor networks provides a cost-efficient way to expand the RFID system's range and to enable an RFID system in areas without a network infrastructure. These two technologies are employed to build a wireless localization system in a children's theme park. The main purpose of this child localization system is to track and locate ...

  6. RFID design principles

    CERN Document Server

    Lehpamer, Harvey

    2012-01-01

    This revised edition of the Artech House bestseller, RFID Design Principles, serves as an up-to-date and comprehensive introduction to the subject. The second edition features numerous updates and brand new and expanded material on emerging topics such as the medical applications of RFID and new ethical challenges in the field. This practical book offers you a detailed understanding of RFID design essentials, key applications, and important management issues. The book explores the role of RFID technology in supply chain management, intelligent building design, transportation systems, military

  7. Managing RFID Sensors Networks with a General Purpose RFID Middleware

    Directory of Open Access Journals (Sweden)

    Enrique Valero

    2012-06-01

    Full Text Available RFID middleware is anticipated to one of the main research areas in the field of RFID applications in the near future. The Data EPC Acquisition System (DEPCAS is an original proposal designed by our group to transfer and apply fundamental ideas from System and Data Acquisition (SCADA systems into the areas of RFID acquisition, processing and distribution systems. In this paper we focus on how to organize and manage generic RFID sensors (edge readers, readers, PLCs, etc… inside the DEPCAS middleware. We denote by RFID Sensors Networks Management (RSNM this part of DEPCAS, which is built on top of two new concepts introduced and developed in this work: MARC (Minimum Access Reader Command and RRTL (RFID Reader Topology Language. MARC is an abstraction layer used to hide heterogeneous devices inside a homogeneous acquisition network. RRTL is a language to define RFID Reader networks and to describe the relationship between them (concentrator, peer to peer, master/submaster.

  8. RFID Malware: Design Principles and Examples

    NARCIS (Netherlands)

    Rieback, M.R.; Simpson, P.N.D.; Crispo, B.; Tanenbaum, A.S.

    2006-01-01

    This paper explores the concept of malware for Radio Frequency Identification (RFID) systems - including RFID exploits, RFID worms, and RFID viruses. We present RFID malware design principles together with concrete examples; the highlight is a fully illustrated example of a self-replicating RFID

  9. RFID design fundamentals and applications

    CERN Document Server

    Lozano-Nieto, Albert

    2010-01-01

    RFID is an increasingly pervasive tool that is now used in a wide range of fields. It is employed to substantiate adherence to food preservation and safety standards, combat the circulation of counterfeit pharmaceuticals, and verify authenticity and history of critical parts used in aircraft and other machinery-and these are just a few of its uses. Goes beyond deployment, focusing on exactly how RFID actually worksRFID Design Fundamentals and Applications systematically explores the fundamental principles involved in the design and characterization of RFID technologies. The RFID market is expl

  10. Design of RFID Mesh Network for Electric Vehicle Smart Charging Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Ching-Yen; Shepelev, Aleksey; Qiu, Charlie; Chu, Chi-Cheng; Gadh, Rajit

    2013-09-04

    With an increased number of Electric Vehicles (EVs) on the roads, charging infrastructure is gaining an ever-more important role in simultaneously meeting the needs of the local distribution grid and of EV users. This paper proposes a mesh network RFID system for user identification and charging authorization as part of a smart charging infrastructure providing charge monitoring and control. The Zigbee-based mesh network RFID provides a cost-efficient solution to identify and authorize vehicles for charging and would allow EV charging to be conducted effectively while observing grid constraints and meeting the needs of EV drivers

  11. User Privacy in RFID Networks

    Science.gov (United States)

    Singelée, Dave; Seys, Stefaan

    Wireless RFID networks are getting deployed at a rapid pace and have already entered the public space on a massive scale: public transport cards, the biometric passport, office ID tokens, customer loyalty cards, etc. Although RFID technology offers interesting services to customers and retailers, it could also endanger the privacy of the end-users. The lack of protection mechanisms being deployed could potentially result in a privacy leakage of personal data. Furthermore, there is the emerging threat of location privacy. In this paper, we will show some practical attack scenarios and illustrates some of them with cases that have received press coverage. We will present the main challenges of enhancing privacy in RFID networks and evaluate some solutions proposed in literature. The main advantages and shortcomings will be briefly discussed. Finally, we will give an overview of some academic and industrial research initiatives on RFID privacy.

  12. Design of RFID Cloud Services in a Low Bandwidth Network Environment

    Directory of Open Access Journals (Sweden)

    John P.T. Mo

    2011-02-01

    Full Text Available The use of Information and Communication Technologies has significantly improved the efficiency of modern supply chains. Existing IT architecture is too rigid to allow new technologies such as RFID technologies to be implemented. With the aid of virtualisation and integrated with cloud services, infrastructure hardware and network devices can be consolidated into a physical device, reducing the cost of ownership. However, for such cloud services model to work correctly, a high speed network is required between each site and the cloud service provider. This poses huge challenges for real‐time system such as RFID‐enabled supply chains. Since modern supply chains operate on a global platform, it is almost impossible to assure availability of high speed networks across the global supply chain. This paper proposes two solutions to supplement the virtualisation and cloud services model. A sub‐cloud services solution, where each service is distributed across multiple hosts across different countries and regions is proposed to enhance accessibility to higher bandwidth networks. The second solution is the Queued Burst Device Compression system incorporates a compression service that compresses RFID data sets into much smaller packages. This solution is proved to work by a multiple‐in‐single‐out queuing model and is suitable for low bandwidth networks such as GPRS and 3G wireless environmenst.

  13. Integration of RFID and Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Miodrag; Bolic; Amiya; Nayak; Ivan; Stojmenovi.

    2007-01-01

    Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) are two important wireless technologies that have wide variety of applications and provide limitless future potentials. However,RFID and sensor networks almost are under development in parallel way. Integration of RFID and wireless sensor networks attracts little attention from research community. This paper first presents a brief introduction on RFID,and then investigates recent research works,new products/patents and applications that integrate RFID with sensor networks. Four types of integration are discussed. They are integrating tags with sensors,integrating tags with wireless sensor nodes,integrating readers with wireless sensor nodes and wire-less devices,and mix of RFID and sensors. New challenges and future works are discussed in the end.

  14. The Design of a Lightweight RFID Middleware

    Directory of Open Access Journals (Sweden)

    Fengqun Lin

    2009-10-01

    Full Text Available Radio Frequency Identification (RFID middleware is often regarded as the central nervous system of RFID systems. In this paper, a lightweight RFID middleware is designed and implemented without the need of an Application Level Events (ALE structure, and its implementation process is described using a typical commerical enterprise. A short review of the current RFID middleware research and development is also included. The characteristics of RFID middleware are presented with a two-centric framework. The senarios of RFID data integration based on the simplified structure are provided to illuminats the design and implementation of the lightweight middleware structure and its development process. The lightweight middleware is easy to maintain and extend because of the simplified and streamlined structure and the short development cycle.

  15. Chipless RFID design procedure and detection techniques

    CERN Document Server

    Rezaiesarlak, Reza

    2015-01-01

    This book examines the design of chipless RFID systems. The authors begin with the historical development of wireless identification systems and finally arrive at a representation of the chipless RFID system as a block diagram illustration. Chapter 2 is devoted to the theoretical bases for the design of chipless RFID tags and detection techniques in the reader. A rigorous mathematical formulation is presented based on the singularity expansion method (SEM) and characteristic mode theory (CMT) in order to study the scattered fields from an object in a general form. Th e authors attempt to explain some physical concepts behind the mathematical descriptions of the theories in this chapter. In Chapter 3, two design procedures based on complex natural resonance and CMT are presented for the design of the chipless RFID tag. By studying the effects of structural parameters on radiation and resonant behaviors of the tag, some design conclusions are presented in this chapter. Chapter 4 is dedicated to the time-frequen...

  16. Optimization of RFID network planning using Zigbee and WSN

    Science.gov (United States)

    Hasnan, Khalid; Ahmed, Aftab; Badrul-aisham, Bakhsh, Qadir

    2015-05-01

    Everyone wants to be ease in their life. Radio frequency identification (RFID) wireless technology is used to make our life easier. RFID technology increases productivity, accuracy and convenience in delivery of service in supply chain. It is used for various applications such as preventing theft of automobiles, tolls collection without stopping, no checkout lines at grocery stores, managing traffic, hospital management, corporate campuses and airports, mobile asset tracking, warehousing, tracking library books, and to track a wealth of assets in supply chain management. Efficiency of RFID can be enhanced by integrating with wireless sensor network (WSN), zigbee mesh network and internet of things (IOT). The proposed system is used for identifying, sensing and real-time locating system (RTLS) of items in an indoor heterogeneous region. The system gives real-time richer information of object's characteristics, location and their environmental parameters like temperature, noise and humidity etc. RTLS reduce human error, optimize inventory management, increase productivity and information accuracy at indoor heterogeneous network. The power consumption and the data transmission rate of the system can be minimized by using low power hardware design.

  17. Security in RFID and sensor networks

    CERN Document Server

    Kitsos, Paris

    2009-01-01

    Security in RFIDMulti-Tag RFID Systems, L. Bolotnyy and G. RobinsAttacking RFID Systems, P. Peris-Lopez, J.C. Hernandez-Castro, J.M. Estevez-Tapiador, and A. RibagordaRFID Relay Attacks: System Analysis,Modeling, and Implementation, A. Lima, A. Miri, and M. NevinsPhysical Privacy and Security in RFID Systems, L. Bolotnyy and G. RobinsAuthentication Protocols in RFID Systems, G. Pantelic, S. Bojanic, and V. TomaševicLightweight Cryptography for Low-Cost RFID Tags, P. Peris-Lopez, J.C.

  18. Design of the RFID for Storage of Biological Information

    OpenAIRE

    Sang-Hee Son; Seok-Man Kim; Yu-Lee Choi; Kyoung-Rok Cho

    2009-01-01

    Recent advances in RFID (radio frequency identification) technology promises to create a wireless circuitry capable of interfacing with biological systems for acquisition, identification and processing of biological data based on radio frequency interaction. Thus, the RFID tag can be attached not only to consumer products and form part of the supply chain, but also to animals, plants and in particular human body. This paper describes the strategy for the design of a novel RFID tag, which stor...

  19. Reorganization of intruder Using Ad-Hoc Network And RFID

    Directory of Open Access Journals (Sweden)

    Vishakha Hagawane

    2014-05-01

    Full Text Available This system is to develop a centralized computer application that needs to identify moving person in a specific area using wireless network. In this paper, we develop a new indoor tracking algorithm using received signal strength. The RFID is able to detect the humans and provide information about the direction of the movement. The gathered information from the node is to be given to the base station for processing. . This application is able to detect and track person, and report direction of the intruder to a central base station. In this system we design nodes through which we are able to track the person. The human intruder is detected using Zigbee.

  20. Energy Efficient In-network RFID Data Filtering Scheme in Wireless Sensor Networks

    Science.gov (United States)

    Bashir, Ali Kashif; Lim, Se-Jung; Hussain, Chauhdary Sajjad; Park, Myong-Soon

    2011-01-01

    RFID (Radio frequency identification) and wireless sensor networks are backbone technologies for pervasive environments. In integration of RFID and WSN, RFID data uses WSN protocols for multi-hop communications. Energy is a critical issue in WSNs; however, RFID data contains a lot of duplication. These duplications can be eliminated at the base station, but unnecessary transmissions of duplicate data within the network still occurs, which consumes nodes’ energy and affects network lifetime. In this paper, we propose an in-network RFID data filtering scheme that efficiently eliminates the duplicate data. For this we use a clustering mechanism where cluster heads eliminate duplicate data and forward filtered data towards the base station. Simulation results prove that our approach saves considerable amounts of energy in terms of communication and computational cost, compared to existing filtering schemes. PMID:22163999

  1. Energy Efficient In-network RFID Data Filtering Scheme in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Myong-Soon Park

    2011-07-01

    Full Text Available RFID (Radio frequency identification and wireless sensor networks are backbone technologies for pervasive environments. In integration of RFID and WSN, RFID data uses WSN protocols for multi-hop communications. Energy is a critical issue in WSNs; however, RFID data contains a lot of duplication. These duplications can be eliminated at the base station, but unnecessary transmissions of duplicate data within the network still occurs, which consumes nodes’ energy and affects network lifetime. In this paper, we propose an in-network RFID data filtering scheme that efficiently eliminates the duplicate data. For this we use a clustering mechanism where cluster heads eliminate duplicate data and forward filtered data towards the base station. Simulation results prove that our approach saves considerable amounts of energy in terms of communication and computational cost, compared to existing filtering schemes.

  2. VSMURF: A Novel Sliding Window Cleaning Algorithm for RFID Networks

    Directory of Open Access Journals (Sweden)

    He Xu

    2017-01-01

    Full Text Available Radio Frequency Identification (RFID is one of the key technologies of the Internet of Things (IoT and is used in many areas, such as mobile payments, public transportation, smart lock, and environment protection. However, the performance of RFID equipment can be easily affected by the surrounding environment, such as electronic productions and metal appliances. These can impose an impact on the RF signal, which makes the collection of RFID data unreliable. Usually, the unreliability of RFID source data includes three aspects: false negatives, false positives, and dirty data. False negatives are the key problem, as the probability of false positives and dirty data occurrence is relatively small. This paper proposes a novel sliding window cleaning algorithm called VSMURF, which is based on the traditional SMURF algorithm which combines the dynamic change of tags and the value analysis of confidence. Experimental results show that VSMURF algorithm performs better in most conditions and when the tag’s speed is low or high. In particular, if the velocity parameter is set to 2 m/epoch, our proposed VSMURF algorithm performs better than SMURF. The results also show that VSMURF algorithm has better performance than other algorithms in solving the problem of false negatives for RFID networks.

  3. The design and simulation of UHF RFID microstrip antenna

    Science.gov (United States)

    Chen, Xiangqun; Huang, Rui; Shen, Liman; Liu, Liping; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Renheng, Xu

    2018-02-01

    At present, China has delineated UHF RFID communicating frequency range which is 840 ∼ 845 MHz and 920 ∼ 925 MHz, but most UHF microstrip antenna don’t carry out this standard, that leads to radio frequency pollution. In order to solve the problems above, a method combining theory and simulation is adopted. Combining with a new ceramic material, a 925.5 MHz RFID microstrip antenna is designed, which is optimized and simulated by HFSS software. The results show that the VSWR of this RFID microstrip antenna is relatively small in the vicinity of 922.5 MHz, the gain is 2.1 dBi, which can be widely used in China’s UHF RFID communicating equipments.

  4. Implications of RFID in Location-Aware Wi-Fi Networks

    Science.gov (United States)

    Duhainy, Robert

    2010-01-01

    The use of radio frequency identification (RFID) technology is increasingly common. Its use for specific applications has been mandated by a number of major retailers, as well as by the U.S. government; however, core RFID technologies and networks lack consistent approaches to maximize the efficiency and security of RFID applications. The purpose…

  5. ARQ Security in Wi-Fi and RFID Networks

    OpenAIRE

    Elsabagh, Mohamed; Abdallah, Yara; Youssef, Moustafa; Gamal, Hesham El

    2010-01-01

    In this paper, we present two practical ARQ-Based security schemes for Wi-Fi and RFID networks. Our proposed schemes enhance the confidentiality and authenticity functions of these networks, respectively. Both schemes build on the same idea; by exploiting the statistical independence between the multipath fading experienced by the legitimate nodes and potential adversaries, secret keys are established and then are continuously updated. The continuous key update property of both schemes makes ...

  6. RFID protocol design, optimization, and security for the Internet of Things

    CERN Document Server

    Liu, Alex X; Liu, Xiulong; Li, Keqiu

    2017-01-01

    This book covers the topic of RFID protocol design and optimization and the authors aim to demystify complicated RFID protocols and explain in depth the principles, techniques, and practices in designing and optimizing them.

  7. RFID antenna design for circular polarization in UHF band

    Science.gov (United States)

    Shahid, Hamza; Khan, Muhammad Talal Ali; Tayyab, Umais; Irshad, Usama Bin; Alkhazraji, Emad; Javaid, Muhammad Sharjeel

    2017-05-01

    A miniature half cross dipole antenna for defense and aerospace RFID applications in UHF band is presented. The dipole printed line arms are half crossed shape on top of dielectric substrate backed by reactive impedance surface. The antenna fed by a coaxial cable at the gap separating the dipole arms. Our design is intended to work at 2.42 GHz for RFID readers. The radiation pattern obtained has HPBW of 112, return loss of 22.24 dB and 90 MHz bandwidth.

  8. Tunable Platform Tolerant Antenna Design for RFID and IoT Applications Using Characteristic Mode Analysis

    OpenAIRE

    Sharif, Abubakar; Ouyang, Jun; Yang, Feng; Long, Rui; Ishfaq, Muhammad Kamran

    2018-01-01

    Radio frequency identification (RFID) is a key technology to realize IoT (Internet of Things) dreams. RFID technology has been emerging in sensing, identification, tracking, and localization of goods. In order to tag a huge number of things, it is cost-effective to use one RFID antenna for tagging different things. Therefore, in this paper a platform tolerant RFID tag antenna with tunable capability is proposed. The proposed tag antenna is designed and optimized using characteristic mode anal...

  9. Design of housing file box of fire academy based on RFID

    Science.gov (United States)

    Li, Huaiyi

    2018-04-01

    This paper presents a design scheme of intelligent file box based on RFID. The advantages of RFID file box and traditional file box are compared and analyzed, and the feasibility of RFID file box design is analyzed based on the actual situation of our university. After introducing the shape and structure design of the intelligent file box, the paper discusses the working process of the file box, and explains in detail the internal communication principle of the RFID file box and the realization of the control system. The application of the RFID based file box will greatly improve the efficiency of our school's archives management.

  10. Controlled Delegation Protocol in Mobile RFID Networks

    Directory of Open Access Journals (Sweden)

    Yang MingHour

    2010-01-01

    Full Text Available To achieve off-line delegation for mobile readers, we propose a delegation protocol for mobile RFID allowing its readers access to specific tags through back-end server. That is to say, reader-tag mutual authentication can be performed without readers being connected to back-end server. Readers are also allowed off-line access to tags' data. Compared with other delegation protocols, our scheme uniquely enables back-end server to limit each reader's reading times during delegation. Even in a multireader situation, our protocol can limit reading times and reading time periods for each of them and therefore makes back-end server's delegation more flexible. Besides, our protocol can prevent authorized readers from transferring their authority to the unauthorized, declining invalid access to tags. Our scheme is proved viable and secure with GNY logic; it is against certain security threats, such as replay attacks, denial of service (DoS attacks, Man-in-the-Middle attacks, counterfeit tags, and breaches of location and data privacy. Also, the performance analysis of our protocol proves that current tags can afford the computation load required in this scheme.

  11. RFID of next generation network for enhancing customer relationship management in healthcare industries.

    Science.gov (United States)

    Alzahrani, Ahmed; Qureshi, Muhammad Shuaib; Thayananthan, Vijey

    2017-10-23

    This paper aims to analyze possible next generation of networked radio frequency identification (NGN-RFID) system for customer relationship management (CRM) in healthcare industries. Customer relationship and its management techniques in a specific healthcare industry are considered in this development. The key objective of using NGN-RFID scheme is to enhance the handling of patients' data to improve the CRM efficiency in healthcare industries. The proposed NGN-RFID system is one of the valid points to improve the ability of CRM by analyzing different prior and current traditional approaches. The legacy of customer relationship management will be improved by using this modern NGN-RFID technology without affecting the novelty.

  12. Delivering an Intelligent Foundation for RFID: Maximizing Network Efficiency with Cisco RFID Solutions

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Radio frequency identification (RFID) is one of today s most anticipated technologies for a broad range of enterprises. Based on the promise of lower operating costs combined with more accurate product and asset information, organizations .Rfrom manufacturers to government agencies, retailers to healthcare providers , Rare introducing RFID technologies in the supply chain, for asset tracking and management, and for security and regulatory purposes.

  13. Long Reach RFID-over-Fiber Distribution and Collection Network

    DEFF Research Database (Denmark)

    Madsen, Peter; Suhr, Lau Frejstrup; Vegas Olmos, Juan José

    This paper presents an RFID-over-Fiber wireless track and trace system using active RFID tags. This paper demonstrates a system, operating over distances up to 30km of optical fiber and 50m of wireless readability.......This paper presents an RFID-over-Fiber wireless track and trace system using active RFID tags. This paper demonstrates a system, operating over distances up to 30km of optical fiber and 50m of wireless readability....

  14. Miniaturization design and implementation of magnetic field coupled RFID antenna

    Science.gov (United States)

    Hu, Tiling

    2013-03-01

    The development of internet of things has brought new opportunities and challenges to the application of RFID tags. Moreover, the Miniaturization application trend of tags at present has become the mainstream of development. In this paper, the double-layer design is to reduce the size of HF antenna, and the magnetic null point of magnetic reconnection region between the RLC resonant circuit and the reader provides sufficient energy to the miniaturization of antenna. The calculated and experimental results show that the miniaturization of HF antennas can meet the reading and writing requirement of the international standard ISO/IEC14443 standard. The results of this paper may make a positive contribution to the applications of RFID technology.

  15. Design and analysis of a highly-integrated CMOS power amplifier for RFID readers

    International Nuclear Information System (INIS)

    Gao Tongqiang; Zhang Chun; Chi Baoyong; Wang Zhihua

    2009-01-01

    To implement a fully-integrated on-chip CMOS power amplifier (PA) for RFID readers, the resonant frequency of each matching network is derived in detail. The highlight of the design is the adoption of a bonding wire as the output-stage inductor. Compared with the on-chip inductors in a CMOS process, the merit of the bondwire inductor is its high quality factor, leading to a higher output power and efficiency. The disadvantage of the bondwire inductor is that it is hard to control. A highly integrated class-E PA is implemented with 0.18-μm CMOS process. It can provide a maximum output power of 20 dBm and a 1 dB output power of 14.5 dBm. The maximum power-added efficiency (PAE) is 32.1%. Also, the spectral performance of the PA is analyzed for the specified RFID protocol.

  16. Design and analysis of a highly-integrated CMOS power amplifier for RFID readers

    Energy Technology Data Exchange (ETDEWEB)

    Gao Tongqiang [Department of Electronics, Tsinghua University, Beijing 100084 (China); Zhang Chun; Chi Baoyong; Wang Zhihua, E-mail: gtq03@mails.tsinghua.edu.c [Institute of Microelectronics, Tsinghua University, Beijing 100084 (China)

    2009-06-01

    To implement a fully-integrated on-chip CMOS power amplifier (PA) for RFID readers, the resonant frequency of each matching network is derived in detail. The highlight of the design is the adoption of a bonding wire as the output-stage inductor. Compared with the on-chip inductors in a CMOS process, the merit of the bondwire inductor is its high quality factor, leading to a higher output power and efficiency. The disadvantage of the bondwire inductor is that it is hard to control. A highly integrated class-E PA is implemented with 0.18-mum CMOS process. It can provide a maximum output power of 20 dBm and a 1 dB output power of 14.5 dBm. The maximum power-added efficiency (PAE) is 32.1%. Also, the spectral performance of the PA is analyzed for the specified RFID protocol.

  17. Bit Level Synchronized MAC Protocol for Multireader RFID Networks

    Directory of Open Access Journals (Sweden)

    Namboodiri Vinod

    2010-01-01

    Full Text Available The operation of multiple RFID readers in close proximity results in interference between the readers. This issue is termed the reader collision problem and cannot always be solved by assigning them to different frequency channels due to technical and regulatory limitations. The typical solution is to separate the operation of such readers across time. This sequential operation, however, results in a long delay to identify all tags. We present a bit level synchronized (BLSync MAC protocol for multi-reader RFID networks that allows multiple readers to operate simultaneously on the same frequency channel. The BLSync protocol solves the reader collision problem by allowing all readers to transmit the same query at the same time. We analyze the performance of using the BLSync protocol and demonstrate benefits of 40%–50% in terms of tag reading delay for most settings. The benefits of BLSync, first demonstrated through analysis, are then validated and quantified through simulations on realistic reader-tag layouts.

  18. Design of the RFID for Storage of Biological Information

    Directory of Open Access Journals (Sweden)

    Sang-Hee Son

    2009-02-01

    Full Text Available Recent advances in RFID (radio frequency identification technology promises to create a wireless circuitry capable of interfacing with biological systems for acquisition, identification and processing of biological data based on radio frequency interaction. Thus, the RFID tag can be attached not only to consumer products and form part of the supply chain, but also to animals, plants and in particular human body. This paper describes the strategy for the design of a novel RFID tag, which stores vital biological information such as body temperature and blood pressure and heartbeat in accordance with the EPC global Class-1 standard. Biological data is obtained from a sensor technology that is based on resistance deviation-to-pulse width converter. The integrated chip consists of an analog front end, command interpreter, collision avoidance block, data storage, sensors, and interface circuitry. The system is capable of supporting heartbeats in the range of 40~200 beats per a minute and blood pressure 0~300mmHg. The proposed system employs collision free algorithm that supports access to single tag within a multiple tag environment. The approach facilitates intelligent management of patients in hospitals as part of an integrated healthcare management system.

  19. Tunable Platform Tolerant Antenna Design for RFID and IoT Applications Using Characteristic Mode Analysis

    Directory of Open Access Journals (Sweden)

    Abubakar Sharif

    2018-01-01

    Full Text Available Radio frequency identification (RFID is a key technology to realize IoT (Internet of Things dreams. RFID technology has been emerging in sensing, identification, tracking, and localization of goods. In order to tag a huge number of things, it is cost-effective to use one RFID antenna for tagging different things. Therefore, in this paper a platform tolerant RFID tag antenna with tunable capability is proposed. The proposed tag antenna is designed and optimized using characteristic mode analysis (CMA. Moreover, this tag antenna consists of a folded patch wrapped around FR 4 substrate and a feeding loop element printed on a paper substrate. The inductive feeding loop is stacked over folded patch and it provides impedance match with RFID chip. Because of separate radiating and feeding element, this tag antenna has a versatility of impedance matching with any RFID chip. Furthermore, this tag is able to cover American RFID band (902–928 MHz and can be tuned to European RFID band (865–868 MHz by adding tunable strips. In order to demonstrate platform tolerant operation, the read range of RFID tag is measured by mounting it on different materials. The maximum read range of RFID tag is 4.5 m in free space or on dielectrics and 6.5 m above 200 × 200 mm2 metal plate, respectively.

  20. RFID-Enabled Navigation and Communication Networks for Long-Duration Space Missions, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Virtual EM Inc. proposes a system that employs semi-passive RFID sensors with carbon nanotube inkjet-printed antenna and solar powered mesh-networked beacons. The...

  1. Zeroth order resonator (ZOR) based RFID antenna design

    Science.gov (United States)

    Masud, Muhammad Mubeen

    Meander-line and multi-layer antennas have been used extensively to design compact UHF radio frequency identification (RFID) tags; however the overall size reduction of meander-line antennas is limited by the amount of parasitic inductance that can be introduced by each meander-line segment, and multi-layer antennas can be too costly. In this study, a new compact antenna topology for passive UHF RFID tags based on zeroth order resonant (ZOR) design techniques is presented. The antenna consists of lossy coplanar conductors and either inter-connected inter-digital capacitor (IDC) or shunt inductor unit-cells with a ZOR frequency near the operating frequency of the antenna. Setting the ZOR frequency near the operating frequency is a key component in the design process because the unit-cells chosen for the design are inductive at the operating frequency. This makes the unit-cells very useful for antenna miniaturization. These new designs in this work have several benefits: the coplanar layout can be printed on a single layer, matching inductive loops that reduce antenna efficiency are not required and ZOR analysis can be used for the design. Finally, for validation, prototype antennas are designed, fabricated and tested.

  2. RFID Tag as a Sensor - A Review on the Innovative Designs and Applications

    Science.gov (United States)

    Meng, Zhaozong; Li, Zhen

    2016-12-01

    The Radio Frequency Identification (RFID) technology has gained interests in both academia and industry since its invention. In addition to the applications in access control and supply chain, RFID is also a cost-efficient solution for Non-Destructive Testing (NDT) and pervasive monitoring. The battery free RFID tags are used as independent electromagnetic sensors or energy harvesting and data transmission interface of sensor modules for different measurement purposes. This review paper aims to provide a comprehensive overview of the innovative designs and applications of RFID sensor technology with new insights, identify the technical challenges, and outline the future perspectives. With a brief introduction to the fundamentals of RFID measurement, the enabling technologies and recent technical progress are illustrated, followed by an extensive discussion of the novel designs and applications. Then, based on an in-depth analysis, the potential constraints are identified and the envisaged future directions are suggested, including printable/wearable RFID, System-on-Chip (SoC), ultra-low power, etc. The comprehensive discussion of RFID sensor technology will be inspirational and useful for academic and industrial communities in investigating, developing, and applying RFID for various measurement applications.

  3. RFID Tag as a Sensor - A Review on the Innovative Designs and Applications

    Directory of Open Access Journals (Sweden)

    Meng Zhaozong

    2016-12-01

    Full Text Available The Radio Frequency Identification (RFID technology has gained interests in both academia and industry since its invention. In addition to the applications in access control and supply chain, RFID is also a cost-efficient solution for Non-Destructive Testing (NDT and pervasive monitoring. The battery free RFID tags are used as independent electromagnetic sensors or energy harvesting and data transmission interface of sensor modules for different measurement purposes. This review paper aims to provide a comprehensive overview of the innovative designs and applications of RFID sensor technology with new insights, identify the technical challenges, and outline the future perspectives. With a brief introduction to the fundamentals of RFID measurement, the enabling technologies and recent technical progress are illustrated, followed by an extensive discussion of the novel designs and applications. Then, based on an in-depth analysis, the potential constraints are identified and the envisaged future directions are suggested, including printable/wearable RFID, System-on-Chip (SoC, ultra-low power, etc. The comprehensive discussion of RFID sensor technology will be inspirational and useful for academic and industrial communities in investigating, developing, and applying RFID for various measurement applications.

  4. RAC-Multi: Reader Anti-Collision Algorithm for Multichannel Mobile RFID Networks

    Directory of Open Access Journals (Sweden)

    Kwangcheol Shin

    2009-12-01

    Full Text Available At present, RFID is installed on mobile devices such as mobile phones or PDAs and provides a means to obtain information about objects equipped with an RFID tag over a multi-channeled telecommunication networks. To use mobile RFIDs, reader collision problems should be addressed given that readers are continuously moving. Moreover, in a multichannel environment for mobile RFIDs, interference between adjacent channels should be considered. This work first defines a new concept of a reader collision problem between adjacent channels and then suggests a novel reader anti-collision algorithm for RFID readers that use multiple channels. To avoid interference with adjacent channels, the suggested algorithm separates data channels into odd and even numbered channels and allocates odd-numbered channels first to readers. It also sets an unused channel between the control channel and data channels to ensure that control messages and the signal of the adjacent channel experience no interference. Experimental results show that suggested algorithm shows throughput improvements ranging from 29% to 46% for tag identifications compared to the GENTLE reader anti-collision algorithm for multichannel RFID networks.

  5. Energy efficient cooperation in underlay RFID cognitive networks for a water smart home.

    Science.gov (United States)

    Nasir, Adnan; Hussain, Syed Imtiaz; Soong, Boon-Hee; Qaraqe, Khalid

    2014-09-30

    Shrinking water resources all over the world and increasing costs of water consumption have prompted water users and distribution companies to come up with water conserving strategies. We have proposed an energy-efficient smart water monitoring application in [1], using low power RFIDs. In the home environment, there exist many primary interferences within a room, such as cell-phones, Bluetooth devices, TV signals, cordless phones and WiFi devices. In order to reduce the interference from our proposed RFID network for these primary devices, we have proposed a cooperating underlay RFID cognitive network for our smart application on water. These underlay RFIDs should strictly adhere to the interference thresholds to work in parallel with the primary wireless devices [2]. This work is an extension of our previous ventures proposed in [2,3], and we enhanced the previous efforts by introducing a new system model and RFIDs. Our proposed scheme is mutually energy efficient and maximizes the signal-to-noise ratio (SNR) for the RFID link, while keeping the interference levels for the primary network below a certain threshold. A closed form expression for the probability density function (pdf) of the SNR at the destination reader/writer and outage probability are derived. Analytical results are verified through simulations. It is also shown that in comparison to non-cognitive selective cooperation, this scheme performs better in the low SNR region for cognitive networks. Moreover, the hidden Markov model's (HMM) multi-level variant hierarchical hidden Markov model (HHMM) approach is used for pattern recognition and event detection for the data received for this system [4]. Using this model, a feedback and decision algorithm is also developed. This approach has been applied to simulated water pressure data from RFID motes, which were embedded in metallic water pipes.

  6. Next Generation RFID-Based Medical Service Management System Architecture in Wireless Sensor Network

    Science.gov (United States)

    Tolentino, Randy S.; Lee, Kijeong; Kim, Yong-Tae; Park, Gil-Cheol

    Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) are two important wireless technologies that have wide variety of applications and provide unlimited future potentials most especially in healthcare systems. RFID is used to detect presence and location of objects while WSN is used to sense and monitor the environment. Integrating RFID with WSN not only provides identity and location of an object but also provides information regarding the condition of the object carrying the sensors enabled RFID tag. However, there isn't any flexible and robust communication infrastructure to integrate these devices into an emergency care setting. An efficient wireless communication substrate for medical devices that addresses ad hoc or fixed network formation, naming and discovery, transmission efficiency of data, data security and authentication, as well as filtration and aggregation of vital sign data need to be study and analyze. This paper proposed an efficient next generation architecture for RFID-based medical service management system in WSN that possesses the essential elements of each future medical application that are integrated with existing medical practices and technologies in real-time, remote monitoring, in giving medication, and patient status tracking assisted by embedded wearable wireless sensors which are integrated in wireless sensor network.

  7. Research and design on system of asset management based on RFID

    Science.gov (United States)

    Guan, Peng; Du, HuaiChang; Jing, Hua; Zhang, MengYue; Zhang, Meng; Xu, GuiXian

    2011-10-01

    By analyzing the problems in the current assets management, this thesis proposing RFID technology will be applied to asset management in order to improve the management level of automation and information. This paper designed the equipment identification based on 433MHz RFID tag and reader which was deeply studied on the basis of RFID tag and card reader circuits, and this paper also illustrates the system of asset management. The RS232 converts Ethernet is a innovative technology to transfer data to PC monitor software, and implement system of asset management based on WEB techniques (PHP and MySQL).

  8. XRFID: Design of an XML Based Efficient Middleware for RFID Systems

    Directory of Open Access Journals (Sweden)

    Indrajit Bhattacharya

    2012-11-01

    existing middleware solutions show dramatic degradation in their performance when the number of simultaneously working readers increases. Our proposed solution tries to recover from that situation also. One of the major issues for large scale deployment of RFID systems is the design of a robust and flexible middleware system to interface various applications to the RFID readers. Most of the existing RFID middleware systems are costly, bulky, non‐portable and heavily dependent on the support software. Our work also provides flexibility for easy addition and removal of applications and hardware.

  9. Intelligent Networks Data Fusion Web-based Services for Ad-hoc Integrated WSNs-RFID

    Directory of Open Access Journals (Sweden)

    Falah Alshahrany

    2016-01-01

    Full Text Available The use of variety of data fusion tools and techniques for big data processing poses the problem of the data and information integration called data fusion having objectives which can differ from one application to another. The design of network data fusion systems aimed at meeting these objectives, need to take into account of the necessary synergy that can result from distributed data processing within the data networks and data centres, involving increased computation and communication. This papers reports on how this processing distribution is functionally structured as configurable integrated web-based support services, in the context of an ad-hoc wireless sensor network used for sensing and tracking, in the context of distributed detection based on complete observations to support real rime decision making. The interrelated functional and hardware RFID-WSN integration is an essential aspect of the data fusion framework that focuses on multi-sensor collaboration as an innovative approach to extend the heterogeneity of the devices and sensor nodes of ad-hoc networks generating a huge amount of heterogeneous soft and hard raw data. The deployment and configuration of these networks require data fusion processing that includes network and service management and enhances the performance and reliability of networks data fusion support systems providing intelligent capabilities for real-time control access and fire detection.

  10. Design of Solar Harvested Semi Active RFID Transponder with Supercapacitor Storage

    OpenAIRE

    Gary Valentine; Lukas Vojtech; Marek Neruda

    2015-01-01

    This paper presents the analysis, design and manufacture of a low cost, low maintenance and long-range prototype of RFID transponder with continuous operability. A prototype of semi-active RFID transponder is produced with a range that can be extended via a DC input to allow all of the readers signal power to be reflected via backscatter modulation. The transponder is powered via solar harvested power which is selected over other energy harvesting technologies as it provides a greater energy ...

  11. Miniaturizing RFID for magnamosis.

    Science.gov (United States)

    Jiang, Hao; Chen, Shijie; Kish, Shad; Loh, Lokkee; Zhang, Junmin; Zhang, Xiaorong; Kwiat, Dillon; Harrison, Michael; Roy, Shuvo

    2014-01-01

    Anastomosis is a common surgical procedure using staples or sutures in an open or laparoscopic surgery. A more effective and much less invasive alternative is to apply the mechanical pressure on the tissue over a few days [1]. Since the pressure is produced by the attractive force between two permanent magnets, the procedure is called magnamosis[1]. To ensure the two magnets are perfectly aligned during the surgery, a miniaturized batteryless Radio Frequency IDentification (RFID) tag is developed to wirelessly telemeter the status of a pressure sensitive mechanical switch. Using the multi-layer circular spiral coil design, the diameter of the RFID tag is shrunk to 10, 15, 19 and 27 mm to support the magnamosis for children as well as adults. With the impedance matching network, the operating distance of these four RFID tags are longer than 10 cm in a 20 × 22 cm(2) area, even when the tag's normal direction is 45° off the antenna's normal direction. Measurement results also indicate that there is no noticeable degradation on the operating distance when the tag is immersed in saline or placed next to the rare-earth magnet. The miniaturized RFID tag presented in this paper is able to support the magnamosis and other medical applications that require the miniaturized RFID tag.

  12. Design And Implementation Of Bank Locker Security System Based On Fingerprint Sensing Circuit And RFID Reader

    Directory of Open Access Journals (Sweden)

    Khaing Mar Htwe

    2015-07-01

    Full Text Available Abstract The main goal of this system is to design a locker security system using RFID and Fingerprint. In this system only authenticated person can open the door. A security system is implemented containing door locking system using passive type of RFID which can activate authenticate and validate the user and unlock the door in real time for secure access. The advantage of using passive RFID is that it functions without a battery and passive tags are lighter and are less expensive than the active tags. This system consists of fingerprint reader microcontroller RFID reader and PC. The RFID reader reads the id number from passive. The fingerprint sensor will check incoming image with enrolled data and it will send confirming signal for C program. If both RFID check and fingerprint image confirmation are matched the microcontroller will drive door motor according to sensors at door edges. This system is more secure than other systems because two codes protection method used.

  13. Multiobjective RFID Network Optimization Using Multiobjective Evolutionary and Swarm Intelligence Approaches

    Directory of Open Access Journals (Sweden)

    Hanning Chen

    2014-01-01

    Full Text Available The development of radio frequency identification (RFID technology generates the most challenging RFID network planning (RNP problem, which needs to be solved in order to operate the large-scale RFID network in an optimal fashion. RNP involves many objectives and constraints and has been proven to be a NP-hard multi-objective problem. The application of evolutionary algorithm (EA and swarm intelligence (SI for solving multiobjective RNP (MORNP has gained significant attention in the literature, but these algorithms always transform multiple objectives into a single objective by weighted coefficient approach. In this paper, we use multiobjective EA and SI algorithms to find all the Pareto optimal solutions and to achieve the optimal planning solutions by simultaneously optimizing four conflicting objectives in MORNP, instead of transforming multiobjective functions into a single objective function. The experiment presents an exhaustive comparison of three successful multiobjective EA and SI, namely, the recently developed multiobjective artificial bee colony algorithm (MOABC, the nondominated sorting genetic algorithm II (NSGA-II, and the multiobjective particle swarm optimization (MOPSO, on MORNP instances of different nature, namely, the two-objective and three-objective MORNP. Simulation results show that MOABC proves to be more superior for planning RFID networks than NSGA-II and MOPSO in terms of optimization accuracy and computation robustness.

  14. An Effective Scheduling-Based RFID Reader Collision Avoidance Model and Its Resource Allocation via Artificial Immune Network

    Directory of Open Access Journals (Sweden)

    Shanjin Wang

    2016-01-01

    Full Text Available Radio frequency identification, that is, RFID, is one of important technologies in Internet of Things. Reader collision does impair the tag identification efficiency of an RFID system. Many developed methods, for example, the scheduling-based series, that are used to avoid RFID reader collision, have been developed. For scheduling-based methods, communication resources, that is, time slots, channels, and power, are optimally assigned to readers. In this case, reader collision avoidance is equivalent to an optimization problem related to resource allocation. However, the existing methods neglect the overlap between the interrogation regions of readers, which reduces the tag identification rate (TIR. To resolve this shortage, this paper attempts to build a reader-to-reader collision avoidance model considering the interrogation region overlaps (R2RCAM-IRO. In addition, an artificial immune network for resource allocation (RA-IRO-aiNet is designed to optimize the proposed model. For comparison, some comparative numerical simulations are arranged. The simulation results show that the proposed R2RCAM-IRO is an effective model where TIR is improved significantly. And especially in the application of reader-to-reader collision avoidance, the proposed RA-IRO-aiNet outperforms GA, opt-aiNet, and PSO in the total coverage area of readers.

  15. RFID Label Tag Design for Metallic Surface Environments

    Directory of Open Access Journals (Sweden)

    Ki Hwan Eom

    2011-01-01

    Full Text Available This paper describes a metal mount RFID tag that works reliably on metallic surfaces. The method proposes the use of commercial label type RFID tags with 2.5 mm thick Styrofoam103.7 with a relative permittivity of 1.03 attached on the back of the tag. In order to verify the performance of the proposed method, we performed experiments on an electric transformer supply chain system. The experimental results showed that the proposed tags can communicate with readers from a distance of 2 m. The recognition rates are comparable to those of commercial metallic mountable tags.

  16. Long range ultra-high frequency (UHF) radio frequency identification (RFID) antenna design

    Science.gov (United States)

    Reynolds, Nathan D.

    There is an ever-increasing demand for radio frequency identification (RFID) tags that are passive, long range, and mountable on multiple surfaces. Currently, RFID technology is utilized in numerous applications such as supply chain management, access control, and public transportation. With the combination of sensory systems in recent years, the applications of RFID technology have been extended beyond tracking and identifying. This extension includes applications such as environmental monitoring and healthcare applications. The available sensory systems usually operate in the medium or high frequency bands and have a low read range. However, the range limitations of these systems are being overcome by the development of RFID sensors focused on utilizing tags in the ultra-high frequency (UHF) band. Generally, RFID tags have to be mounted to the object that is being identified. Often the objects requiring identification are metallic. The inherent properties of metallic objects have substantial effects on nearby electromagnetic radiation; therefore, the operation of the tag antenna is affected when mounted on a metallic surface. This outlines one of the most challenging problems for RFID systems today: the optimization of tag antenna performance in a complex environment. In this research, a novel UHF RFID tag antenna, which has a low profile, long range, and is mountable on metallic surfaces, is designed analytically and simulated using a 3-D electromagnetic simulator, ANSYS HFSS. A microstrip patch antenna is selected as the antenna structure, as patch antennas are low profile and suitable for mounting on metallic surfaces. Matching and theoretical models of the microstrip patch antenna are investigated. Once matching and theory of a microstrip patch antenna is thoroughly understood, a unique design technique using electromagnetic band gap (EBG) structures is explored. This research shows that the utilization of an EBG structure in the patch antenna design yields

  17. Energy Efficient Cooperation in Underlay RFID Cognitive Networks for a Water Smart Home

    Directory of Open Access Journals (Sweden)

    Adnan Nasir

    2014-09-01

    Full Text Available Shrinking water  resources all over the world and increasing  costs of water consumption  have prompted  water users  and distribution companies  to come up with water conserving strategies. We have proposed an energy-efficient  smart water monitoring application in [1], using low power RFIDs. In the home environment,  there exist many primary interferences within a room, such as cell-phones,  Bluetooth  devices, TV signals, cordless phones and WiFi devices.  In order to reduce the interference  from our proposed RFID network for these primary  devices, we have proposed a cooperating  underlay  RFID cognitive network for our smart application on water.  These underlay  RFIDs should strictly adhere to the interference thresholds to work in parallel with the primary wireless devices [2].  This work is an extension of our previous  ventures proposed in [2,3], and we enhanced the previous efforts by introducing  a new system model and RFIDs.  Our proposed scheme is mutually energy efficient and maximizes the signal-to-noise ratio (SNR for the RFID link, while keeping the interference levels for the primary  network below a certain threshold. A closed form expression for the probability density function (pdf of the SNR at the destination reader/writer and outage probability are derived. Analytical results are verified through simulations. It is also shown that in comparison to non-cognitive selective cooperation,  this scheme performs  better in the low SNR region for cognitive networks. Moreover, the hidden Markov model’s (HMM multi-level variant hierarchical hidden Markov model (HHMM approach is used for pattern recognition and event detection for the data received for this system [4]. Using this model, a feedback and decision algorithm is also developed.  This approach has been applied  to simulated water pressure data from RFID motes, which were embedded in metallic water pipes.

  18. Indoor Navigation Design Integrated with Smart Phones and Rfid Devices

    Science.gov (United States)

    Ortakci, Y.; Demiral, E.; Atila, U.; Karas, I. R.

    2015-10-01

    High rise, complex and huge buildings in the cities are almost like a small city with their tens of floors, hundreds of corridors and rooms and passages. Due to size and complexity of these buildings, people need guidance to find their way to the destination in these buildings. In this study, a mobile application is developed to visualize pedestrian's indoor position as 3D in their smartphone and RFID Technology is used to detect the position of pedestrian. While the pedestrian is walking on his/her way on the route, smartphone will guide the pedestrian by displaying the photos of indoor environment on the route. Along the tour, an RFID (Radio-Frequency Identification) device is integrated to the system. The pedestrian will carry the RFID device during his/her tour in the building. The RFID device will send the position data to the server directly in every two seconds periodically. On the other side, the pedestrian will just select the destination point in the mobile application on smartphone and sent the destination point to the server. The shortest path from the pedestrian position to the destination point is found out by the script on the server. This script also sends the environment photo of the first node on the acquired shortest path to the client as an indoor navigation module.

  19. The Anti-RFI Design of Intelligent Electric Energy Meters with UHF RFID

    Science.gov (United States)

    Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

    2018-03-01

    In order to solve the existing artificial meter reading watt-hour meter industry is still slow and inventory of common problems, using the uhf radio frequency identification (RFID) technology and intelligent watt-hour meter depth fusion, which has a one-time read multiple tags, identification distance, high transmission rate, high reliability, etc, while retaining the original asset management functions, in order to ensure the uhf RFID and minimum impact on the operation of the intelligent watt-hour meter, proposed to improve the stability of the electric meter system while working at the same time, this paper designs the uhf RFID intelligent watt-hour meter radio frequency interference resistance, put forward to improve intelligent watt-hour meter electromagnetic compatibility design train of thought, and introduced its power and the hardware circuit design of printed circuit board, etc.

  20. An Design of HF-Band RFID System with Multiple Readers and Passive Tags for Indoor Mobile Robot Self-Localization

    Directory of Open Access Journals (Sweden)

    Jian Mi

    2016-07-01

    Full Text Available Radio frequency identification (RFID technology has already been explored for efficient self-localization of indoor mobile robots. A mobile robot equipped with RFID readers detects passive RFID tags installed on the floor in order to locate itself. The Monte-Carlo localization (MCL method enables the localization of a mobile robot equipped with an RFID system with reasonable accuracy, sufficient robustness and low computational cost. The arrangements of RFID readers and tags and the size of antennas are important design parameters for realizing accurate and robust self-localization using a low-cost RFID system. The design of a likelihood model of RFID tag detection is also crucial for the accurate self-localization. This paper presents a novel design and arrangement of RFID readers and tags for indoor mobile robot self-localization. First, by considering small-sized and large-sized antennas of an RFID reader, we show how the design of the likelihood model affects the accuracy of self-localization. We also design a novel likelihood model by taking into consideration the characteristics of the communication range of an RFID system with a large antenna. Second, we propose a novel arrangement of RFID tags with eight RFID readers, which results in the RFID system configuration requiring much fewer readers and tags while retaining reasonable accuracy of self-localization. We verify the performances of MCL-based self-localization realized using the high-frequency (HF-band RFID system with eight RFID readers and a lower density of RFID tags installed on the floor based on MCL in simulated and real environments. The results of simulations and real environment experiments demonstrate that our proposed low-cost HF-band RFID system realizes accurate and robust self-localization of an indoor mobile robot.

  1. Design and optimization of an RFID-enabled passport tracking system

    Directory of Open Access Journals (Sweden)

    Abdulsalam Dukyil

    2018-01-01

    Full Text Available The implementation of RFID technology has been subject to ever-increasing popularity in relation to the traceability of products as one of the most cutting edge technologies. Implementing such a technology leads to an increase in the visibility management of products. Notwithstanding this, RFID communication performance is potentially affected by interference between the RFID devices. It is also subject to additional costs in investment that should be taken into account. Consequently, seeking a cost-effective design with a desired communication performance for RFID-enabled systems has become a key factor in order to be competitive in today’s markets. This study presents a cost and performance-effective design for a proposed RFID-enabled passport tracking system through the development of a multi-objective model that takes in account economic, performance and social criteria. The developed model is aimed at solving the design problem by (i allocating the optimal numbers of related facilities that should be established and (ii obtaining trade-offs among three objectives: minimising implementation and operational costs; minimising RFID reader interference; and maximising the social impact measured in the number of created jobs. To come closer to real design in terms of considering the uncertain parameters, the developed multi-objective model was developed in terms of a fuzzy multi-objective model (FMOM. To solve the fuzzy multi-objective optimization problem, two solution methods were used and a decision-making method was employed to select the final trade-off solution. A case study was applied to examine the applicability of the developed model and the proposed solution methods.

  2. Risk Assessment along Supply Chain: A RFID and Wireless Sensor Network Integration Approach

    OpenAIRE

    Laurent GOMEZ; Maryline LAURENT; Ethmane EL MOUSTAINE

    2012-01-01

    Wireless Sensor Networks together with Radio Frequency Identification are promising technologies for supply chain management systems. They both provide supply chain players with goods tracking and monitoring functions along the chain. Whereas RFIDs are rather focusing on identification of goods (e.g., identification, classification), WSNs are meant to monitor and control the supply chain environment. Nevertheless, despite the interest for the supply chain management systems, their integration...

  3. Design and construction of an RFID-enabled infrastructure the next avatar of the Internet

    CERN Document Server

    Prabhu, Nagabhushana

    2013-01-01

    Radio frequency identification (RFID) is one of the game-changing technologies of the 21st century. This book explores the prospects of RFID and its transformative impact on the design and operation of complex systems governing human and computer interactions. The text examines the informatics challenges involved in integrating the physical and cyber worlds and in analyzing large volumes of raw data to derive decision-aiding information, particularly in the context of large-scale, globally distributed infrastructures. It also details the near- and long-term potential of this technology, includ

  4. The design of RFID convey or belt gate systems using an antenna control unit.

    Science.gov (United States)

    Park, Chong Ryol; Lee, Seung Joon; Eom, Ki Hwan

    2011-01-01

    This paper proposes an efficient management system utilizing a Radio Frequency Identification (RFID) antenna control unit which is moving along with the path of boxes of materials on the conveyor belt by manipulating a motor. The proposed antenna control unit, which is driven by a motor and is located on top of the gate, has an array structure of two antennas with parallel connection. The array structure helps improve the directivity of antenna beam pattern and the readable RFID distance due to its configuration. In the experiments, as the control unit follows moving materials, the reading time has been improved by almost three-fold compared to an RFID system employing conventional fixed antennas. The proposed system also has a recognition rate of over 99% without additional antennas for detecting the sides of a box of materials. The recognition rate meets the conditions recommended by the Electronic Product Code glbal network (EPC)global for commercializing the system, with three antennas at a 20 dBm power of reader and a conveyor belt speed of 3.17 m/s. This will enable a host of new RFID conveyor belt gate systems with increased performance.

  5. The Design of RFID Conveyor Belt Gate Systems Using an Antenna Control Unit

    Directory of Open Access Journals (Sweden)

    Ki Hwan Eom

    2011-09-01

    Full Text Available This paper proposes an efficient management system utilizing a Radio Frequency Identification (RFID antenna control unit which is moving along with the path of boxes of materials on the conveyor belt by manipulating a motor. The proposed antenna control unit, which is driven by a motor and is located on top of the gate, has an array structure of two antennas with parallel connection. The array structure helps improve the directivity of antenna beam pattern and the readable RFID distance due to its configuration. In the experiments, as the control unit follows moving materials, the reading time has been improved by almost three-fold compared to an RFID system employing conventional fixed antennas. The proposed system also has a recognition rate of over 99% without additional antennas for detecting the sides of a box of materials. The recognition rate meets the conditions recommended by the Electronic Product Code glbal network (EPCglobal for commercializing the system, with three antennas at a 20 dBm power of reader and a conveyor belt speed of 3.17 m/s. This will enable a host of new RFID conveyor belt gate systems with increased performance.

  6. Design of an Elliptic Curve Cryptography processor for RFID tag chips.

    Science.gov (United States)

    Liu, Zilong; Liu, Dongsheng; Zou, Xuecheng; Lin, Hui; Cheng, Jian

    2014-09-26

    Radio Frequency Identification (RFID) is an important technique for wireless sensor networks and the Internet of Things. Recently, considerable research has been performed in the combination of public key cryptography and RFID. In this paper, an efficient architecture of Elliptic Curve Cryptography (ECC) Processor for RFID tag chip is presented. We adopt a new inversion algorithm which requires fewer registers to store variables than the traditional schemes. A new method for coordinate swapping is proposed, which can reduce the complexity of the controller and shorten the time of iterative calculation effectively. A modified circular shift register architecture is presented in this paper, which is an effective way to reduce the area of register files. Clock gating and asynchronous counter are exploited to reduce the power consumption. The simulation and synthesis results show that the time needed for one elliptic curve scalar point multiplication over GF(2163) is 176.7 K clock cycles and the gate area is 13.8 K with UMC 0.13 μm Complementary Metal Oxide Semiconductor (CMOS) technology. Moreover, the low power and low cost consumption make the Elliptic Curve Cryptography Processor (ECP) a prospective candidate for application in the RFID tag chip.

  7. Design and testing of RFID sensor tag fabricated using inkjet-printing and electrodeposition

    Science.gov (United States)

    Chien Dang, Mau; Son Nguyen, Dat; Dung Dang, Thi My; Tedjini, Smail; Fribourg-Blanc, Eric

    2014-06-01

    The passive RFID tag with an added sensing function is of interest to many applications. In particular, applications where RFID tagging is already considered to be the next step, such as food items, are a specific target. This paper demonstrates a flexible RFID tag sensor fabricated using a low cost technique with an added zero-cost sensing function. It is more specifically applied to the sensing of degradable food, in particular beef meat in our demonstrated example. To reach this, the antenna is designed in such a way to be sensitive to the variation of the dielectric permittivity of the meat over time. The design of the sensing tag as well as its fabrication process are described. The fabrication involves inkjet printing of a silver nanoparticle based ink on a commercial low cost PET film to create a seed layer. It is followed by a copper electrodeposition step on top of the silver pattern to complete the tag to obtain the desired thickness and conductivity of the tag antenna. The results of the electrical tests showed that with the inkjet printing-electrodeposition combination it is possible to produce flexible electrically conductive patterns for practical RFID applications. The tag was then tested in close-to-real-world conditions and it is demonstrated that it can provide a sensing function to detect the consumption limit of the packaged beef.

  8. Integrating RFID Technology and EPC Network into a B2B Retail Supply Chain: A Step Toward Intelligent Business Processes

    Directory of Open Access Journals (Sweden)

    Samuel Fosso Wamba

    2007-06-01

    Full Text Available This article introduces RFID technology and the EPC Network and investigates their potential for B-to-B eCommerce supply chain management. Based on empirical data gathered from four tightly interrelated firms from three layers of a supply chain, several scenarios integrating RFID and the EPC Network have been tested and evaluated. In the context of warehousing activities in one specific retail supply chain, the results indicate that i the business process approach seems quite appropriate to capture the real potential of RFID and the EPC Network; ii RFID technology and the EPC Network can improve the “shipping” and the “receiving” processes; iii they can automatically trigger some business processes; iv they foster a higher level of information sharing between supply chain members; and v they promote the emergence of new business processes such as “process-to-process,” “process-to-machine,” and “machine-to-machine.” The paper helps to improve our understanding of the real potential of RFID and the EPC Network for business processes.

  9. Radiation source states on-line supervision system design and implementation based on RFID technology

    International Nuclear Information System (INIS)

    Yang Binhua; Ling Qiu; Yin Guoli; Yang Kun; Wan Xueping; Wang Kan

    2011-01-01

    It puts forward radiation source states on-line monitoring resolution based on RFID technology. Firstly, the system uses RFID in real-time transmission of the radiation dose rate, and monitors the radiation source states and dose rate of the surrounding environment on-line. Then it adopts regional wireless networking mode to construct enterprise level monitoring network, which resolves long-distance wiring problems. And then it uses GPRS wireless to transport the real-time data to the monitoring center and the government supervision department, By adopting randomly dynamic cording in display update every day, it strengthens the supervision of the radiation source. At last this system has been successful applied to a thickness gauge project, which verifies the feasibility and practicality is good. (authors)

  10. A Platform for RFID Security and Privacy Administration

    NARCIS (Netherlands)

    Rieback, M.R.; Gaydadjiev, G.N.; Crispo, B.; Hofman, R.F.H.; Tanenbaum, A.S.

    2006-01-01

    This paper presents the design, implementation, and evaluation of the RFID Guardian, the first-ever unified platform for RFID security and privacy administration. The RFID Guardian resembles an ``RFID firewall,'' that monitors and controls access to RFID tags by combining a standard-issue RFID

  11. Modeling and query the uncertainty of network constrained moving objects based on RFID data

    Science.gov (United States)

    Han, Liang; Xie, Kunqing; Ma, Xiujun; Song, Guojie

    2007-06-01

    The management of network constrained moving objects is more and more practical, especially in intelligent transportation system. In the past, the location information of moving objects on network is collected by GPS, which cost high and has the problem of frequent update and privacy. The RFID (Radio Frequency IDentification) devices are used more and more widely to collect the location information. They are cheaper and have less update. And they interfere in the privacy less. They detect the id of the object and the time when moving object passed by the node of the network. They don't detect the objects' exact movement in side the edge, which lead to a problem of uncertainty. How to modeling and query the uncertainty of the network constrained moving objects based on RFID data becomes a research issue. In this paper, a model is proposed to describe the uncertainty of network constrained moving objects. A two level index is presented to provide efficient access to the network and the data of movement. The processing of imprecise time-slice query and spatio-temporal range query are studied in this paper. The processing includes four steps: spatial filter, spatial refinement, temporal filter and probability calculation. Finally, some experiments are done based on the simulated data. In the experiments the performance of the index is studied. The precision and recall of the result set are defined. And how the query arguments affect the precision and recall of the result set is also discussed.

  12. Design and development of electric vehicle charging station equipped with RFID

    Science.gov (United States)

    Panatarani, C.; Murtaddo, D.; Maulana, D. W.; Irawan, S.; Joni, I. M.

    2016-02-01

    This paper reports the development of electric charging station from distributed renewable for electric vehicle (EV). This designed refer to the input voltage standard of IEC 61851, plugs features of IEC 62196 and standard communication of ISO 15118. The developed electric charging station used microcontroller ATMEGA8535 and RFID as controller and identifier of the EV users, respectively. The charging station successfully developed as desired features for electric vehicle from renewable energy resources grid with solar panel, wind power and batteries storage.

  13. Design and Implementation of an Rfid Based Automated Students Attendance System R BASAS

    OpenAIRE

    Shoewu, O

    2015-01-01

    Most educational institutions’ administrators are concerned about student irregular attendance. Truancies can affect student overall academic performance. The conventional method of taking attendance by calling names or signing on paper is very time consuming and insecure, hence inefficient. Therefore, RFID-based student attendance system is required to assist the faculty and the lecturer for this time-consuming process. The R-BASAS device is designed to collect and manage student’s attendanc...

  14. Design and Optimization of Passive UHF RFID Tag Antenna for Mounting on or inside Material Layers

    Science.gov (United States)

    Shao, Shuai

    There is great desire to employ passive UHF RFID tags for inventory tracking and sensing in a diversity of applications and environments. Owing to its battery-free operation, non-line-of sight detection, low cost, long read range and small form factor, each year billions of RFID tags are being deployed in retail, logistics, manufacturing, biomedical inventories, among many other applications. However, the performance of these RFID systems has not met expectations. This is because a tag's performance deteriorates significantly when mounted on or inside arbitrary materials. The tag antenna is optimized only for a given type of material at a certain location of placement, and detuning takes place when attached to or embedded in materials with dielectric properties outside the design range. Thereby, different customized tags may be needed for identifying objects even within the same class of products. This increases the overall cost of the system. Furthermore, conventional copper foil-based RFID tag antennas are prone to metal fatigue and wear, and cannot survive hostile environments where antennas could be deformed by external forces and failures occur. Therefore, it is essential to understand the interaction between the antenna and the material in the vicinity of the tag, and design general purpose RFID tag antennas possessing excellent electrical performance as well as robust mechanical structure. A particularly challenging application addressed here is designing passive RFID tag antennas for automotive tires. Tires are composed of multiple layers of rubber with different dielectric properties and thicknesses. Furthermore, metallic plies are embedded in the sidewalls and steel belts lie beneath the tread to enforce mechanical integrity. To complicate matters even more, a typical tire experiences a 10% stretching during the construction process. This dissertation focuses on intuitively understanding the interaction between the antenna and the material in the

  15. Biomimicry of symbiotic multi-species coevolution for discrete and continuous optimization in RFID networks

    Directory of Open Access Journals (Sweden)

    Na Lin

    2017-03-01

    Full Text Available In recent years, symbiosis as a rich source of potential engineering applications and computational model has attracted more and more attentions in the adaptive complex systems and evolution computing domains. Inspired by different symbiotic coevolution forms in nature, this paper proposed a series of multi-swarm particle swarm optimizers called PS2Os, which extend the single population particle swarm optimization (PSO algorithm to interacting multi-swarms model by constructing hierarchical interaction topologies and enhanced dynamical update equations. According to different symbiotic interrelationships, four versions of PS2O are initiated to mimic mutualism, commensalism, predation, and competition mechanism, respectively. In the experiments, with five benchmark problems, the proposed algorithms are proved to have considerable potential for solving complex optimization problems. The coevolutionary dynamics of symbiotic species in each PS2O version are also studied respectively to demonstrate the heterogeneity of different symbiotic interrelationships that effect on the algorithm’s performance. Then PS2O is used for solving the radio frequency identification (RFID network planning (RNP problem with a mixture of discrete and continuous variables. Simulation results show that the proposed algorithm outperforms the reference algorithms for planning RFID networks, in terms of optimization accuracy and computation robustness.

  16. Biomimicry of symbiotic multi-species coevolution for discrete and continuous optimization in RFID networks.

    Science.gov (United States)

    Lin, Na; Chen, Hanning; Jing, Shikai; Liu, Fang; Liang, Xiaodan

    2017-03-01

    In recent years, symbiosis as a rich source of potential engineering applications and computational model has attracted more and more attentions in the adaptive complex systems and evolution computing domains. Inspired by different symbiotic coevolution forms in nature, this paper proposed a series of multi-swarm particle swarm optimizers called PS 2 Os, which extend the single population particle swarm optimization (PSO) algorithm to interacting multi-swarms model by constructing hierarchical interaction topologies and enhanced dynamical update equations. According to different symbiotic interrelationships, four versions of PS 2 O are initiated to mimic mutualism, commensalism, predation, and competition mechanism, respectively. In the experiments, with five benchmark problems, the proposed algorithms are proved to have considerable potential for solving complex optimization problems. The coevolutionary dynamics of symbiotic species in each PS 2 O version are also studied respectively to demonstrate the heterogeneity of different symbiotic interrelationships that effect on the algorithm's performance. Then PS 2 O is used for solving the radio frequency identification (RFID) network planning (RNP) problem with a mixture of discrete and continuous variables. Simulation results show that the proposed algorithm outperforms the reference algorithms for planning RFID networks, in terms of optimization accuracy and computation robustness.

  17. RFID technology and the EPC network as enablers of mobile business: a case study in a retail supply chain

    NARCIS (Netherlands)

    Wamba, S.F.; Bendavid, Y.; Lefebvre, L.A.; Lefebvre, E.

    2006-01-01

    The main objective of this study is to explore the impact of integrating Radio Frequency Identification (RFID) technology and the Electronic Product Code (EPC) network into one specific supply chain in the retail industry and investigate their potentials as enablers of Mobile Business (m-business).

  18. A RFID specific participatory design approach to support design and implementation of real-time location systems in the operating room.

    Science.gov (United States)

    Guédon, A C P; Wauben, L S G L; de Korne, D F; Overvelde, M; Dankelman, J; van den Dobbelsteen, J J

    2015-01-01

    Information technology, such as real-time location (RTL) systems using Radio Frequency IDentification (RFID) may contribute to overcome patient safety issues and high costs in healthcare. The aim of this work is to study if a RFID specific Participatory Design (PD) approach supports the design and the implementation of RTL systems in the Operating Room (OR). A RFID specific PD approach was used to design and implement two RFID based modules. The Device Module monitors the safety status of OR devices and the Patient Module tracks the patients' locations during their hospital stay. The PD principles 'multidisciplinary team', 'participation users (active involvement)' and 'early adopters' were used to include users from the RFID company, the university and the hospital. The design and implementation process consisted of two 'structured cycles' ('iterations'). The effectiveness of this approach was assessed by the acceptance in terms of level of use, continuity of the project and purchase. The Device Module included eight strategic and twelve tactical actions and the Patient Module included six strategic and twelve tactical actions. Both modules are now used on a daily basis and are purchased by the hospitals for continued use. The RFID specific PD approach was effective in guiding and supporting the design and implementation process of RFID technology in the OR. The multidisciplinary teams and their active participation provided insights in the social and the organizational context of the hospitals making it possible to better fit the technology to the hospitals' (future) needs.

  19. Technologie RFID

    OpenAIRE

    Černý, Tomáš

    2007-01-01

    Práce poskytuje přehled o problematice RFID technologií. Analyzuje historický vývoj RFID technologií, popisuje základní komponenty RFID systémů, normy spojené s RFID, bezpečnost RFID a trh RFID technologií. Dále se práce věnuje možnostem využití RFID technologií v různých oborech, zařazení RFID systémů do rámce podnikové informatiky a hodnotí efekty, které RFID technologie přináší. Práce také definuje doporučený postup pro zavádění RFID technologií do firmy....

  20. Hierarchical Artificial Bee Colony Algorithm for RFID Network Planning Optimization

    Directory of Open Access Journals (Sweden)

    Lianbo Ma

    2014-01-01

    Full Text Available This paper presents a novel optimization algorithm, namely, hierarchical artificial bee colony optimization, called HABC, to tackle the radio frequency identification network planning (RNP problem. In the proposed multilevel model, the higher-level species can be aggregated by the subpopulations from lower level. In the bottom level, each subpopulation employing the canonical ABC method searches the part-dimensional optimum in parallel, which can be constructed into a complete solution for the upper level. At the same time, the comprehensive learning method with crossover and mutation operators is applied to enhance the global search ability between species. Experiments are conducted on a set of 10 benchmark optimization problems. The results demonstrate that the proposed HABC obtains remarkable performance on most chosen benchmark functions when compared to several successful swarm intelligence and evolutionary algorithms. Then HABC is used for solving the real-world RNP problem on two instances with different scales. Simulation results show that the proposed algorithm is superior for solving RNP, in terms of optimization accuracy and computation robustness.

  1. Hierarchical artificial bee colony algorithm for RFID network planning optimization.

    Science.gov (United States)

    Ma, Lianbo; Chen, Hanning; Hu, Kunyuan; Zhu, Yunlong

    2014-01-01

    This paper presents a novel optimization algorithm, namely, hierarchical artificial bee colony optimization, called HABC, to tackle the radio frequency identification network planning (RNP) problem. In the proposed multilevel model, the higher-level species can be aggregated by the subpopulations from lower level. In the bottom level, each subpopulation employing the canonical ABC method searches the part-dimensional optimum in parallel, which can be constructed into a complete solution for the upper level. At the same time, the comprehensive learning method with crossover and mutation operators is applied to enhance the global search ability between species. Experiments are conducted on a set of 10 benchmark optimization problems. The results demonstrate that the proposed HABC obtains remarkable performance on most chosen benchmark functions when compared to several successful swarm intelligence and evolutionary algorithms. Then HABC is used for solving the real-world RNP problem on two instances with different scales. Simulation results show that the proposed algorithm is superior for solving RNP, in terms of optimization accuracy and computation robustness.

  2. Achievable Performance and Effective Interrogator Design for SAW RFID Sensor Tags

    Science.gov (United States)

    Barton Richard J.

    2012-01-01

    For many NASA missions, remote sensing is a critical application that supports activities such as environmental monitoring, planetary science, structural shape and health monitoring, non-destructive evaluation, etc. The utility of the remote sensing devices themselves is greatly increased if they are passive V that is, they do not require any on-board power supply such as batteries V and if they can be identified uniquely during the sensor interrogation process. Additional passive sensor characteristics that enable greater utilization in space applications are small size and weight, long read ranges with low interrogator power, ruggedness, and operability in extreme environments (vacuum, extreme high/low temperature, high radiation, etc.) In this paper, we consider one very promising passive sensor technology, called surface acoustic wave (SAW) radio-frequency identification (RFID), that satisfies all of these criteria. In general, RFID is a method of identifying items using radio waves to interrogate tags encoded with a unique identifier that are affixed to the items of interest. In the case of passive tags, only the interrogator, which transmits power to the tags in the form of radio-frequency electromagnetic radiation, requires access to a power supply. Passive RFID technologies are used today in many applications, including asset tracking and management, security and access control, and remote sensing. To date, most of the development and application in RFID technology has focused on either asset/inventory tracking and control or security and access control because these are the largest commercial application areas. Recently however, there has been growing interest in using passive RFID technology for remote sensing applications, and SAW devices are at the forefront of RFID sensing technology development. Although SAW RFID tags have great potential for use in numerous space-based remote sensing applications, the limited collision resolution capability of

  3. Research on and design of key circuits in RFID tag chip for container management

    Directory of Open Access Journals (Sweden)

    Wang Wenjie

    2016-01-01

    Full Text Available This paper introduces the design of semi-passive RFID tag chip capable of monitoring container safety. A system framework complying with requirements by ISO/IEC 18000-6C is firstly presented, and then differences from the key units of common passive chip, such as switch-state monitoring circuit, power management unit and anti-shake design in baseband processor, are elaborated. The main function of such a chip is to record the container opening frequency during transportation. Finally, the realizations of each unit’s function are simulated.

  4. RFID vs.Wi-Fi ID

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Wireless networks and Radio Frequency Identification(RFID) have always been closely linked.One of Wi-Fi’s first applications was transferring data from portable RFID readers.But the popularity of RFID has led some to envision whole networks of readers embed- ded throughout a building’s infrastructure.Reva Systems had an- nounced what it calls a Tag Acquisition Network(TAN),an array of RFID readers that work with passive,batteryless tags.Meanwhile,

  5. RFID Location Algorithm

    Directory of Open Access Journals (Sweden)

    Wang Zi Min

    2016-01-01

    Full Text Available With the development of social services, people’s living standards improve further requirements, there is an urgent need for a way to adapt to the complex situation of the new positioning technology. In recent years, RFID technology have a wide range of applications in all aspects of life and production, such as logistics tracking, car alarm, security and other items. The use of RFID technology to locate, it is a new direction in the eyes of the various research institutions and scholars. RFID positioning technology system stability, the error is small and low-cost advantages of its location algorithm is the focus of this study.This article analyzes the layers of RFID technology targeting methods and algorithms. First, RFID common several basic methods are introduced; Secondly, higher accuracy to political network location method; Finally, LANDMARC algorithm will be described. Through this it can be seen that advanced and efficient algorithms play an important role in increasing RFID positioning accuracy aspects.Finally, the algorithm of RFID location technology are summarized, pointing out the deficiencies in the algorithm, and put forward a follow-up study of the requirements, the vision of a better future RFID positioning technology.

  6. SOA-based RFID public services infrastructure: architecture and its core services

    Institute of Scientific and Technical Information of China (English)

    Zeng Junfang; Li Ran; Luo Jin; Liu Yu

    2009-01-01

    Radio frequency identification (RFID) has prominent advantages compared with other auto-identification technologies. Combining RFID with network technology, physical object tracking and information sharing can possibly be carried out in an innovative way. Regarding open-loop RFID applications, RFID public services infrastructure (PSI) is presented, PSI architecture is designed, and service modules are implemented, and a demonstrative application system, blood management and traceability system, is studied to verify PSI. Experimental results show the feasibility of the proposed architecture and the usability of PSI framework software.

  7. Design and Implementation of User-Created Information Systems with Mobile RFID

    Science.gov (United States)

    Lee, Jae Kwoen; Chin, Sungho; Kim, Hee Cheon; Chung, Kwang Sik

    RFID (Radio Frequency Identification) has been usually applied at physical distribution field. The Mobile RFID can be the only technology that we can lead the market. In our country, ETRI standardizes MOBION (MOBile Identification ON), and the mobile-telecommunication companies provide the trial-mobile RFID service from 2006. In the trial-mobile RFID services, the Broker model is used to decode the mobile RFID code. However, the Broker model has some problems, such as communication overhead caused by the frequent ODS query, service performance, and various services for users. In this paper, we developed device application that is capable for filtering unrelated code from RFID service to improve the decoding performance. We also improve the performance through simplifying connection process between device application and the broker. Finally, we propose and develop the user-created information system to widely distribute the Mobile RFID service.

  8. RFID added value sensing capabilities

    DEFF Research Database (Denmark)

    Anggorjati, B.; Çetin, K.; Mihovska, A.

    2010-01-01

    Radio frequency identification (RFID) is a key technology for Europe. Since the initial emergence of the technology, there has been a noticeable shift away from RFID pilot projects of the early days, towards a broad deployment of RFID in order to increase the efficiency and innovation of processes....... Even though Europe is a leading player in the world of RFID technology, several challenges need to be addressed in order for RFID to reach its full potential. The funded under FP7 ICT project ASPIRE is one of the coordinated European efforts to further the advancement of this technology, in the areas...... of enabling technology development for RFID. In particular, the focus of ASPIRE is on design, development and adoption of an innovative, programmable, royalty-free, lightweight and privacy friendly RFID middleware....

  9. Design of books inventory with RFID antenna in library management system

    Directory of Open Access Journals (Sweden)

    Cheng Ching-Chien

    2017-01-01

    Full Text Available A 915 MHz printed radio-frequency-identification (RFID antennas with the characteristics of good gain and omnidirectional beam wave is constructed and evaluated in this study. The objective is to find out their best reading rates for providing effective wireless communications among RFID antenna during the library book inventory process. And an optimal library inventory system which is based on electromagnetic identification (EMID technology is proposed, which is constructed to find the optimal tag location for a book, test the tag readability for bookshelves, and connect a couple of multi-layer bookshelves with multiplexers and updat the tag reading status in the database of the computer terminal. The fabricated antenna reader and the proposed system are embedded into different locations of bookshelves and tested at the library of Cheng Shiu University in Taiwan. According to the experimental results, the designed prototype of the antenna reader has the characteristics of the directional radiation pattern, good gain, simple shape, low cost and is easy to be integrated into the bookshelf. And the designed library inventory system can authenticate the location of a book automatically. They can benefit administrating librarians with the capabilities of decreasing the library inventory processing time and reducing the possibility of the books being misplaced.

  10. Design of Solar Harvested Semi Active RFID Transponder with Supercapacitor Storage

    Directory of Open Access Journals (Sweden)

    Gary Valentine

    2015-01-01

    Full Text Available This paper presents the analysis, design and manufacture of a low cost, low maintenance and long-range prototype of RFID transponder with continuous operability. A prototype of semi-active RFID transponder is produced with a range that can be extended via a DC input to allow all of the readers signal power to be reflected via backscatter modulation. The transponder is powered via solar harvested power which is selected over other energy harvesting technologies as it provides a greater energy density and lower cost. Solar has one major drawback in terms of providing a steady DC voltage in it needed a constant supply of sunlight. A method of power storage is proposed, and the use of a supercapacitor over a rechargeable battery is used as it has a longer lifespan due to higher recharge rates. The prototype underwent a series of experiments in various working environments and proves an effective solution in providing long lasting operability. The paper concludes the use of solar harvesting with supercapacitor storage has potential for further uses in external remote sensors used in the Internet of Things.

  11. Analysis and design of power efficient semi-passive RFID tag

    International Nuclear Information System (INIS)

    Che Wenyi; Guan Shuo; Wang Xiao; Xiong Tingwen; Xi Jingtian; Tan Xi; Yan Na; Min Hao

    2010-01-01

    The analysis and design of a semi-passive radio frequency identification (RFID) tag is presented. By studying the power transmission link of the backscatter RFID system and exploiting a power conversion efficiency model for a multi-stage AC-DC charge pump, the calculation method for semi-passive tag's read range is proposed. According to different read range limitation factors, an intuitive way to define the specifications of tag's power budget and backscatter modulation index is given. A test chip is implemented in SMIC 0.18 μm standard CMOS technology under the guidance of theoretical analysis. The main building blocks are the threshold compensated charge pump and low power wake-up circuit using the power triggering wake-up mode. The proposed semi-passive tag is fully compatible to EPC C1G2 standard. It has a compact chip size of 0.54 mm 2 , and is adaptable to batteries with a 1.2 to 2.4 V output voltage.

  12. Analysis and design of power efficient semi-passive RFID tag

    Energy Technology Data Exchange (ETDEWEB)

    Che Wenyi; Guan Shuo; Wang Xiao; Xiong Tingwen; Xi Jingtian; Tan Xi; Yan Na; Min Hao, E-mail: yanna@fudan.edu.c [State Key Laboratory of ASIC and System, Auto-ID Laboratory, Fudan University, Shanghai 201203 (China)

    2010-07-15

    The analysis and design of a semi-passive radio frequency identification (RFID) tag is presented. By studying the power transmission link of the backscatter RFID system and exploiting a power conversion efficiency model for a multi-stage AC-DC charge pump, the calculation method for semi-passive tag's read range is proposed. According to different read range limitation factors, an intuitive way to define the specifications of tag's power budget and backscatter modulation index is given. A test chip is implemented in SMIC 0.18 {mu}m standard CMOS technology under the guidance of theoretical analysis. The main building blocks are the threshold compensated charge pump and low power wake-up circuit using the power triggering wake-up mode. The proposed semi-passive tag is fully compatible to EPC C1G2 standard. It has a compact chip size of 0.54 mm{sup 2}, and is adaptable to batteries with a 1.2 to 2.4 V output voltage.

  13. RFID Tag as a Sensor - A Review on the Innovative Designs and Applications

    OpenAIRE

    Meng, Zhaozong; Li, Zhen

    2016-01-01

    The Radio Frequency Identification (RFID) technology has gained interests in both academia and industry since its invention. In addition to the applications in access control and supply chain, RFID is also a cost-efficient solution for Non-Destructive Testing (NDT) and pervasive monitoring. The battery free RFID tags are used as independent electromagnetic sensors or energy harvesting and data transmission interface of sensor modules for different measurement purposes. This review paper aims ...

  14. Design of a passive UHF RFID tag for the ISO18000-6C protocol

    International Nuclear Information System (INIS)

    Wang Yao; Wen Guangjun; Mao Wei; He Yanli; Zhu Xueyong

    2011-01-01

    This paper presents a new fully integrated wide-range UHF passive RFID tag chip design that is compatible with the ISO18000-6C protocol. In order to reduce the die area, an ultra-low power CMOS voltage regulator without resistors and an area-efficient amplitude shift keying demodulator with a novel adaptive average generator are both adopted. A low power clock generator is designed to guarantee the accuracy of the clock under ±4%. As the clock gating technology is employed to reduce the power consumption of the baseband processor, the total power consumption of the tag is about 14 μW with a sensitivity of -9.5 dBm. The detection distance can reach about 5 m under 4 W effective isotropic radiated power. The whole tag is fabricated in TSMC 0.18 μm CMOS technology and the chip size is 880 x 880 μm 2 . (semiconductor integrated circuits)

  15. Design of a passive UHF RFID tag for the ISO18000-6C protocol

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yao; Wen Guangjun; Mao Wei; He Yanli; Zhu Xueyong, E-mail: wangyao220597@yahoo.com.cn [RFIC Laboratory CICS, School of Communication and Information Engineering, University of Electronic Science and Technology of China, Chengdu 611731 (China)

    2011-05-15

    This paper presents a new fully integrated wide-range UHF passive RFID tag chip design that is compatible with the ISO18000-6C protocol. In order to reduce the die area, an ultra-low power CMOS voltage regulator without resistors and an area-efficient amplitude shift keying demodulator with a novel adaptive average generator are both adopted. A low power clock generator is designed to guarantee the accuracy of the clock under {+-}4%. As the clock gating technology is employed to reduce the power consumption of the baseband processor, the total power consumption of the tag is about 14 {mu}W with a sensitivity of -9.5 dBm. The detection distance can reach about 5 m under 4 W effective isotropic radiated power. The whole tag is fabricated in TSMC 0.18 {mu}m CMOS technology and the chip size is 880 x 880 {mu}m{sup 2}. (semiconductor integrated circuits)

  16. Radio frequency identification and sensors from rfid to chipless RFID

    CERN Document Server

    Perret, Etienne

    2014-01-01

    This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, co

  17. Dynamics of person-to-person interactions from distributed RFID sensor networks.

    Directory of Open Access Journals (Sweden)

    Ciro Cattuto

    Full Text Available BACKGROUND: Digital networks, mobile devices, and the possibility of mining the ever-increasing amount of digital traces that we leave behind in our daily activities are changing the way we can approach the study of human and social interactions. Large-scale datasets, however, are mostly available for collective and statistical behaviors, at coarse granularities, while high-resolution data on person-to-person interactions are generally limited to relatively small groups of individuals. Here we present a scalable experimental framework for gathering real-time data resolving face-to-face social interactions with tunable spatial and temporal granularities. METHODS AND FINDINGS: We use active Radio Frequency Identification (RFID devices that assess mutual proximity in a distributed fashion by exchanging low-power radio packets. We analyze the dynamics of person-to-person interaction networks obtained in three high-resolution experiments carried out at different orders of magnitude in community size. The data sets exhibit common statistical properties and lack of a characteristic time scale from 20 seconds to several hours. The association between the number of connections and their duration shows an interesting super-linear behavior, which indicates the possibility of defining super-connectors both in the number and intensity of connections. CONCLUSIONS: Taking advantage of scalability and resolution, this experimental framework allows the monitoring of social interactions, uncovering similarities in the way individuals interact in different contexts, and identifying patterns of super-connector behavior in the community. These results could impact our understanding of all phenomena driven by face-to-face interactions, such as the spreading of transmissible infectious diseases and information.

  18. The design of radioactive source tracking management system based on RFID

    International Nuclear Information System (INIS)

    Yan Yongjun; Zhou Jianliang

    2008-01-01

    The paper introduces a solution of safety and security management system of radioactive source in storage and use by employing advanced RFID technology and computer database technology. And make some suggestions for further improvement. (authors)

  19. Design and Development of an RFID-based HIS - A Case Study

    Directory of Open Access Journals (Sweden)

    C.H. Wu

    2011-02-01

    Full Text Available The Healthcare industry involves critical activities where small mistakes could cause huge loss of life and incur massive financial losses. Improving operational efficiency and enhancing data correctness of patients are the prime targets of using hospital information system (HIS. Radio Frequency Identification (RFID technology, with a unique ability to perform automatic data collection without any human intervention, has gained great interest in the healthcare industry. In this research, an RFID-enabled HIS is proposed for improving operations in a hospital. This research presents the fundamentals of RFID, the benefits and its challenges, and also demonstrates three improved signature applications. It aims at providing the healthcare industry with a comprehensive understanding of RFID and its suitability for healthcare applications. The proposed system is considered to be suitably operational, practical, and affordable for healthcare organizations not only in China and Hong Kong, but also in other countries

  20. New analysis and design of a RF rectifier for RFID and implantable devices.

    Science.gov (United States)

    Liu, Dong-Sheng; Li, Feng-Bo; Zou, Xue-Cheng; Liu, Yao; Hui, Xue-Mei; Tao, Xiong-Fei

    2011-01-01

    New design and optimization of charge pump rectifiers using diode-connected MOS transistors is presented in this paper. An analysis of the output voltage and Power Conversion Efficiency (PCE) is given to guide and evaluate the new design. A novel diode-connected MOS transistor for UHF rectifiers is presented and optimized, and a high efficiency N-stage charge pump rectifier based on this new diode-connected MOS transistor is designed and fabricated in a SMIC 0.18-μm 2P3M CMOS embedded EEPROM process. The new diode achieves 315 mV turn-on voltage and 415 nA reverse saturation leakage current. Compared with the traditional rectifier, the one based on the proposed diode-connected MOS has higher PCE, higher output voltage and smaller ripple coefficient. When the RF input is a 900-MHz sinusoid signal with the power ranging from -15 dBm to -4 dBm, PCEs of the charge pump rectifier with only 3-stage are more than 30%, and the maximum output voltage is 5.5 V, and its ripple coefficients are less than 1%. Therefore, the rectifier is especially suitable to passive UHF RFID tag IC and implantable devices.

  1. On the move with RFID

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Scanology is an independent automatic identification specialist providing state of the art barcode and RFID solutions to our European customer base. Our knowledge of the present and what is yet to come allows us to provide honest, practical advice to clients transitioning from barcode to RFID. Scanology designs, builds, installs and services end-to-end sup-

  2. Design and Implementation of Library RFID Management System%图书馆RFID管理系统设计与实现

    Institute of Scientific and Technical Information of China (English)

    谢松

    2015-01-01

    随着RFID技术的成熟和广泛使用,越来越多的图书馆开始应用RFID技术进行日常的管理和服务,本文通过分析RFID技术的工作原理,设计了一种常见的RFID管理系统的系统结构及技术构架.%With mature and widely use of RFID technology,more and more libraries begins to apply RFID technology in daily management and service.This article,through the analysis of the working principle of RFID technology,designs a common system structure and technical framework of RFID management system.

  3. The Design and Implementation of the Remote Centralized-Monitoring System of Well-Control Equipment Based on RFID Technique

    Directory of Open Access Journals (Sweden)

    Luo Bin

    2017-01-01

    Full Text Available At present, in domestic for the management of well control equipment continue to the traditional way of nameplates identifies and paper-based registration, there are many issues like the separation of data information of device, easy lose, difficult query, confused management and many other problems, which will make the problem device into the well field, and then resulting in well control runaway drilling accident. To solve the above problems, this paper put forward to the integrated remote centralized-monitoring management mode of the well-control equipment. Taking the advantages of IOT technology, adopting the RFID technology, and combining with the remote transmission, this paper designs the remote centralized-monitoring system of well-control equipment based on RFID, which realizes the intelligent management of well-control equipment and meets the actual demand of the well-control equipment safe use and timely scheduling, and it has the ability of field application.

  4. An Assessment of RFID Applications in Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Gładysz Bartłomiej

    2015-12-01

    Full Text Available The meaning of Cyber Physical Systems and an Internet of Things with indication of RFID position in those concepts was outlined. Research program related to assessment of RFID technology was presented. Author deducted on problems related to RFID implementations and RFID essentially for logistics of manufacturing companies. Research goals and problems were formulated. Tools, techniques, models and methods that could be utilized were proposed and discussed. Research was focused on design of a new method to support early decision making phases for RFID application in logistics of manufacturing companies. Author stated that literature and practice lacks of complex method to answer if RFID is strategically important for the company, which processes should be RFID-supported, how RFID-supported processes should be designed and if RFID-support is rational. Framework for assessment of RFID technology with illustrative example was discussed.

  5. Providing strong Security and high privacy in low-cost RFID networks

    DEFF Research Database (Denmark)

    David, Mathieu; Prasad, Neeli R.

    2009-01-01

    Since the dissemination of Radio Frequency IDentification (RFID) tags is getting larger and larger, the requirement for strong security and privacy is also increasing. Low-cost and ultra-low-cost tags are being implemented on everyday products, and their limited resources constraints the security...

  6. Design and implementation of an ultra-low power passive UHF RFID tag

    International Nuclear Information System (INIS)

    Shen Jinpeng; Wang Xin'an; Liu Shan; Zong Hongqiang; Huang Jinfeng; Yang Xin; Feng Xiaoxing; Ge Binjie

    2012-01-01

    This paper presents a fully integrated passive UHF RFID tag chip complying with the ISO18000-6B protocol. The tag chip includes an RF/analog front-end, a baseband processor, and a 512-bit EEPROM memory. To improve power conversion efficiency, a Schottky barrier diode based rectifier is adopted. A novel voltage reference using the peaking current source is discussed in detail, which can meet the low-power, low-voltage requirement while retaining circuit simplicity. Most of the analog blocks are designed to work under sub-1 V to reduce power consumption, and several practical methods are used to further reduce the power consumption of the baseband processor. The whole tag chip is implemented in a TSMC 0.18 μm CMOS process with a die size of 800 × 800 μm 2 . Measurement results show that the total power consumption of the tag chip is only 7.4 μW with a sensitivity of −12 dBm. (semiconductor integrated circuits)

  7. RFID security a lightweight paradigm

    CERN Document Server

    Khattab, Ahmed; Amini, Esmaeil; Bayoumi, Magdy

    2017-01-01

    This book provides a comprehensive treatment of security in the widely adopted, Radio Frequency Identification (RFID) technology. The authors present the fundamental principles of RFID cryptography in a manner accessible to a broad range of readers, enabling them to improve their RFID security design. This book also offers the reader a range of interesting topics portraying the current state-of-the-art in RFID technology and how it can be integrated with today’s Internet of Things (IoT) vision. The authors describe a first-of-its-kind, lightweight symmetric authenticated encryption cipher called Redundant Bit Security (RBS), which enables significant, multi-faceted performance improvements compared to existing cryptosystems. This book is a must-read for anyone aiming to overcome the constraints of practical implementation in RFID security technologies.

  8. Employing RFID for an Equipment Management System via Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Jui-Ho Chen

    2014-01-01

    Full Text Available This paper is mainly in combination with RFID to construct a set of power system equipment remote control, used first on the reader tags received after the use of Visual Basic in order to determine the signal and then transmits the signal via the RS232 cable to control circuit 8051 to control the instrument power switch. The topic is written in the Visual Basic RFID and uses features, such as personnel control systems, and access control systems, which are derived from the time of access control systems, several instrument control systems, and uses records stored in the form of functions, where the other circuit transmits signals to Visual Basic 8051, and then, by 8051, controls the instrument power switch.

  9. Hierarchical Network Design

    DEFF Research Database (Denmark)

    Thomadsen, Tommy

    2005-01-01

    Communication networks are immensely important today, since both companies and individuals use numerous services that rely on them. This thesis considers the design of hierarchical (communication) networks. Hierarchical networks consist of layers of networks and are well-suited for coping...... with changing and increasing demands. Two-layer networks consist of one backbone network, which interconnects cluster networks. The clusters consist of nodes and links, which connect the nodes. One node in each cluster is a hub node, and the backbone interconnects the hub nodes of each cluster and thus...... the clusters. The design of hierarchical networks involves clustering of nodes, hub selection, and network design, i.e. selection of links and routing of ows. Hierarchical networks have been in use for decades, but integrated design of these networks has only been considered for very special types of networks...

  10. Documentation package for the RFID temperature monitoring system (Model 9977 packages at NTS)

    International Nuclear Information System (INIS)

    Chen, K.; Tsai, H.

    2009-01-01

    The technical basis for extending the Model 9977 shipping package periodic maintenance beyond the one-year interval to a maximum of five years is based on the performance of the O-ring seals and the environmental conditions. The DOE Packaging Certification Program (PCP) has tasked Argonne National Laboratory to develop a Radio-Frequency Identification (RFID) temperature monitoring system for use by the facility personnel at DAF/NTS. The RFID temperature monitoring system, depicted in the figure below, consists of the Mk-1 RFId tags, a reader, and a control computer mounted on a mobile platform that can operate as a stand-alone system, or it can be connected to the local IT network. As part of the Conditions of Approval of the CoC, the user must complete the prescribed training to become qualified and be certified for operation of the RFID temperature monitoring system. The training course will be administered by Argonne National Laboratory on behalf of the Headquarters Certifying Official. This is a complete documentation package for the RFID temperature monitoring system of the Model 9977 packagings at NTS. The documentation package will be used for training and certification. The table of contents are: Acceptance Testing Procedure of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Acceptance Testing Result of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Performance Test of the Single Bolt Seal Sensor for the Model 9977 Packaging; Calibration of Built-in Thermistors in RFID Tags for Nevada Test Site; Results of Calibration of Built-in Thermistors in RFID Tags; Results of Thermal Calibration of Second Batch of MK-I RFID Tags; Procedure for Installing and Removing MK-1 RFID Tag on Model 9977 Drum; User Guide for RFID Reader and Software for Temperature Monitoring of Model 9977 Drums at NTS; Software Quality Assurance Plan (SQAP) for the ARG-US System; Quality Category for the RFID Temperature Monitoring System; The

  11. Documentation pckage for the RFID temperature monitoring system (Of Model 9977 packages at NTS).

    Energy Technology Data Exchange (ETDEWEB)

    Chen, K.; Tsai, H.; Decision and Information Sciences

    2009-02-20

    The technical basis for extending the Model 9977 shipping package periodic maintenance beyond the one-year interval to a maximum of five years is based on the performance of the O-ring seals and the environmental conditions. The DOE Packaging Certification Program (PCP) has tasked Argonne National Laboratory to develop a Radio-Frequency Identification (RFID) temperature monitoring system for use by the facility personnel at DAF/NTS. The RFID temperature monitoring system, depicted in the figure below, consists of the Mk-1 RFId tags, a reader, and a control computer mounted on a mobile platform that can operate as a stand-alone system, or it can be connected to the local IT network. As part of the Conditions of Approval of the CoC, the user must complete the prescribed training to become qualified and be certified for operation of the RFID temperature monitoring system. The training course will be administered by Argonne National Laboratory on behalf of the Headquarters Certifying Official. This is a complete documentation package for the RFID temperature monitoring system of the Model 9977 packagings at NTS. The documentation package will be used for training and certification. The table of contents are: Acceptance Testing Procedure of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Acceptance Testing Result of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Performance Test of the Single Bolt Seal Sensor for the Model 9977 Packaging; Calibration of Built-in Thermistors in RFID Tags for Nevada Test Site; Results of Calibration of Built-in Thermistors in RFID Tags; Results of Thermal Calibration of Second Batch of MK-I RFID Tags; Procedure for Installing and Removing MK-1 RFID Tag on Model 9977 Drum; User Guide for RFID Reader and Software for Temperature Monitoring of Model 9977 Drums at NTS; Software Quality Assurance Plan (SQAP) for the ARG-US System; Quality Category for the RFID Temperature Monitoring System; The

  12. A review of tags anti-collision and localization protocols in RFID networks.

    Science.gov (United States)

    Ullah, S; Alsalih, W; Alsehaim, A; Alsadhan, N

    2012-12-01

    Radio Frequency IDentification (RFID) has allowed the realization of ubiquitous tracking and monitoring of physical objects wirelessly with minimum human interactions. It plays a key role in a wide range of applications including asset tracking, contactless payment, access control, transportation and logistics, and other industrial applications. On the other side, RFID systems face several technical challenges that need to be overcome in order to achieve their potential benefits; tags collisions and localization of tagged objects are two important challenges. Numerous anti-collision and localization protocols have been proposed to address these challenges. This paper reviews the state-of-art tags' anti-collision and localization protocols, and provides a deep insight into technical issues of these protocols. The probabilistic and deterministic anti-collision protocols are critically studied and compared in terms of different parameters. We further review distance estimation, scene analysis, and proximity localization schemes and provide useful suggestions. We also introduce a new hybrid direction that utilizes power control to spatially partition the interrogation range of a reader for more efficient anti-collision and localization. Finally, we present the applications of RFID systems in healthcare sectors.

  13. Security enhancement mechanism based on contextual authentication and role analysis for 2G-RFID systems.

    Science.gov (United States)

    Tang, Wan; Chen, Min; Ni, Jin; Yang, Ximin

    2011-01-01

    The traditional Radio Frequency Identification (RFID) system, in which the information maintained in tags is passive and static, has no intelligent decision-making ability to suit application and environment dynamics. The Second-Generation RFID (2G-RFID) system, referred as 2G-RFID-sys, is an evolution of the traditional RFID system to ensure better quality of service in future networks. Due to the openness of the active mobile codes in the 2G-RFID system, the realization of conveying intelligence brings a critical issue: how can we make sure the backend system will interpret and execute mobile codes in the right way without misuse so as to avoid malicious attacks? To address this issue, this paper expands the concept of Role-Based Access Control (RBAC) by introducing context-aware computing, and then designs a secure middleware for backend systems, named Two-Level Security Enhancement Mechanism or 2L-SEM, in order to ensure the usability and validity of the mobile code through contextual authentication and role analysis. According to the given contextual restrictions, 2L-SEM can filtrate the illegal and invalid mobile codes contained in tags. Finally, a reference architecture and its typical application are given to illustrate the implementation of 2L-SEM in a 2G-RFID system, along with the simulation results to evaluate how the proposed mechanism can guarantee secure execution of mobile codes for the system.

  14. Security Enhancement Mechanism Based on Contextual Authentication and Role Analysis for 2G-RFID Systems

    Directory of Open Access Journals (Sweden)

    Ximin Yang

    2011-06-01

    Full Text Available The traditional Radio Frequency Identification (RFID system, in which the information maintained in tags is passive and static, has no intelligent decision-making ability to suit application and environment dynamics. The Second-Generation RFID (2G-RFID system, referred as 2G-RFID-sys, is an evolution of the traditional RFID system to ensure better quality of service in future networks. Due to the openness of the active mobile codes in the 2G-RFID system, the realization of conveying intelligence brings a critical issue: how can we make sure the backend system will interpret and execute mobile codes in the right way without misuse so as to avoid malicious attacks? To address this issue, this paper expands the concept of Role-Based Access Control (RBAC by introducing context-aware computing, and then designs a secure middleware for backend systems, named Two-Level Security Enhancement Mechanism or 2L-SEM, in order to ensure the usability and validity of the mobile code through contextual authentication and role analysis. According to the given contextual restrictions, 2L-SEM can filtrate the illegal and invalid mobile codes contained in tags. Finally, a reference architecture and its typical application are given to illustrate the implementation of 2L-SEM in a 2G-RFID system, along with the simulation results to evaluate how the proposed mechanism can guarantee secure execution of mobile codes for the system.

  15. An Effective Scheduling-Based RFID Reader Collision Avoidance Model and Its Resource Allocation via Artificial Immune Network

    OpenAIRE

    Wang, Shanjin; Li, Zhonghua; He, Chunhui; Li, Jianming

    2016-01-01

    Radio frequency identification, that is, RFID, is one of important technologies in Internet of Things. Reader collision does impair the tag identification efficiency of an RFID system. Many developed methods, for example, the scheduling-based series, that are used to avoid RFID reader collision, have been developed. For scheduling-based methods, communication resources, that is, time slots, channels, and power, are optimally assigned to readers. In this case, reader collision avoidance is equ...

  16. Improving RF Transmit Power and Received Signal Strength in 2.4 GHz ZigBee Based Active RFID System with Embedded Method

    Science.gov (United States)

    Po'ad, F. A.; Ismail, W.; Jusoh, J. F.

    2017-08-01

    This paper describes the experiments and analysis conducted on 2.4 GHz embedded active Radio Frequency Identification (RFID) - Wireless Sensor Network (WSN) based system that has been developed for the purposes of location tracking and monitoring in indoor and outdoor environments. Several experiments are conducted to test the effectiveness and performance of the developed system and two of them is by measuring the Radio Frequency (RF) transmitting power and Received Signal Strength (RSS) to prove that the embedded active RFID tag is capable to generate higher transmit power during data transmission and able to provide better RSS reading compared to standalone RFID tag. Experiments are carried out on two RFID tags which are active RFID tag embedded with GPS and GSM (ER2G); and standalone RFID tag communicating with the same active RFID reader. The developed ER2G contributes 12.26 % transmit power and 6.47 % RSS reading higher than standalone RFID tag. The results conclude that the ER2G gives better performance compared to standalone RFID tag and can be used as guidelines for future design improvements.

  17. Designing a ring-VCO for RFID transponders in 0.18 μm CMOS process.

    Science.gov (United States)

    Jalil, Jubayer; Reaz, Mamun Bin Ibne; Bhuiyan, Mohammad Arif Sobhan; Rahman, Labonnah Farzana; Chang, Tae Gyu

    2014-01-01

    In radio frequency identification (RFID) systems, performance degradation of phase locked loops (PLLs) mainly occurs due to high phase noise of voltage-controlled oscillators (VCOs). This paper proposes a low power, low phase noise ring-VCO developed for 2.42 GHz operated active RFID transponders compatible with IEEE 802.11 b/g, Bluetooth, and Zigbee protocols. For ease of integration and implementation of the module in tiny die area, a novel pseudodifferential delay cell based 3-stage ring oscillator has been introduced to fabricate the ring-VCO. In CMOS technology, 0.18 μm process is adopted for designing the circuit with 1.5 V power supply. The postlayout simulated results show that the proposed oscillator works in the tuning range of 0.5-2.54 GHz and dissipates 2.47 mW of power. It exhibits a phase noise of -126.62 dBc/Hz at 25 MHz offset from 2.42 GHz carrier frequency.

  18. Behavior-based cleaning for unreliable RFID data sets.

    Science.gov (United States)

    Fan, Hua; Wu, Quanyuan; Lin, Yisong

    2012-01-01

    Radio Frequency IDentification (RFID) technology promises to revolutionize the way we track items and assets, but in RFID systems, missreading is a common phenomenon and it poses an enormous challenge to RFID data management, so accurate data cleaning becomes an essential task for the successful deployment of systems. In this paper, we present the design and development of a RFID data cleaning system, the first declarative, behavior-based unreliable RFID data smoothing system. We take advantage of kinematic characteristics of tags to assist in RFID data cleaning. In order to establish the conversion relationship between RFID data and kinematic parameters of the tags, we propose a movement behavior detection model. Moreover, a Reverse Order Filling Mechanism is proposed to ensure a more complete access to get the movement behavior characteristics of tag. Finally, we validate our solution with a common RFID application and demonstrate the advantages of our approach through extensive simulations.

  19. Design and Analysis of Double-Gate MOSFETs for Ultra-Low Power Radio Frequency Identification (RFID: Device and Circuit Co-Design

    Directory of Open Access Journals (Sweden)

    Tony T. Kim

    2011-07-01

    Full Text Available Recently, double-gate MOSFETs (DGMOSFETs have been shown to be more optimal for ultra-low power circuit design due to the improved subthreshold slope and the reduced leakage current compared to bulk CMOS. However, DGMOSFETs for subthreshold circuit design have not been much explored in comparison to those for strong inversion-based design. In this paper, various configurations of DGMOSFETs, such as tied/independent gates and symmetric/asymmetric gate oxide thickness are explored for ultra-low power and high efficient radio frequency identification (RFID design. Comparison of bulk CMOS with DGMOSFETs has been conducted in ultra-low power subthreshold digital logic design and rectifier design, emphasizing the scope of the nano-scale DGMOSFET technology for future ultra-low power systems. The DGMOSFET-based subthreshold logic improves energy efficiency by more than 40% compared to the bulk CMOS-based logic at 32 nm. Among the various DGMOSFET configurations for RFID rectifiers, symmetric tied-gate DGMOSFET has the best power conversion efficiency and the lowest power consumption.

  20. Estimating the Effects of Radio Frequency Identification (RFID) Tagging Technologies on the Army's War-Time Logistics Network

    National Research Council Canada - National Science Library

    O'Brien, Kristina

    2004-01-01

    .... Implementing business practices on the battlefield seems like an easy answer to these problems, but the implementation of RFID tags mayor may not easily transition to a military of combat environment...

  1. Pemanfaatan Sistem RFID sebagai Pembatas Akses Ruangan

    Directory of Open Access Journals (Sweden)

    HENDI HANDIAN RACHMAT

    2016-02-01

    Full Text Available ABSTRAK Pada penelitian ini, sistem RFID (Radio Frequency Identification dimanfaatkan sebagai kartu identifikasi personal pada sistem akses ruangan. Keberadaan sistem ini ditujukan untuk menjaga keamanan dan privasi ruangan dari seseorang yang tidak memiliki otoritas untuk memasuki ruangan tersebut. Melalui perancangan dan implementasi sistem akses ruangan ini, dilakukan evaluasi sistem kerja kunci elektrik berbasis komponen solenoid serta jarak dan posisi optimal pembacaan RFID tag guna memberikan kenyamanan pada pengguna ketika mengakses ruangan. RFID tag yang dipergunakan dalam sistem ini berbentuk kartu tipe EM4001 dan menyimpan kode unik yang digunakan sebagai identifikasi personal. Kode ini dibaca oleh RFID reader tipe ID-12 dan divalidasi otoritasnya dengan mikrokontroler ATMega32 untuk mengatur sistem kerja kunci elektrik yang dirancang sendiri menggunakan solenoid. Sistem ini dilengkapi pula dengan sistem database untuk pencatatan pengguna yang mengakses ruangan. Dari hasil pengujian, seluruh (100% RFID tag dapat dikenali oleh RFID reader dalam tiga posisi berbeda dengan jarak optimal sejauh 5 cm (vertikal dan 2 cm (horisontal. Keseluruhan (100% aktifitas pengguna yang mengakses ruangan dapat tercatat dalam sistem database. Hasil penelitian ini dapat disimpulkan bahwa teknologi RFID dapat digunakan secara nyaman dan aman sebagai alternatif sistem identifikasi personal untuk sistem akses ruangan. Kata Kunci : kunci elektrik, RFID, sistem akses ruangan, sistem database, solenoid. ABSTRACT In this research, RFID system was utilized as a personal identification security card in access room system. This system was aimed to secure a room and to have privacy from unauthorized person to enter the room. By designing and implementing the system, a solenoid based electric key system as well as an optimal distance and position of RFID tag were evaluated to know the most convenience condition for all users during accessing the room. RFID tag used in

  2. USE OF RFID AT LARGE-SCALE EVENTS

    Directory of Open Access Journals (Sweden)

    Yuusuke KAWAKITA

    2005-01-01

    Full Text Available Radio Frequency Identification (RFID devices and related technologies have received a great deal of attention for their ability to perform non-contact object identification. Systems incorporating RFID have been evaluated from a variety of perspectives. The authors constructed a networked RFID system to support event management at NetWorld+Interop 2004 Tokyo, an event that received 150,000 visitors. The system used multiple RFID readers installed at the venue and RFID tags carried by each visitor to provide a platform for running various management and visitor support applications. This paper presents the results of this field trial of RFID readability rates. It further addresses the applicability of RFID systems to visitor management, a problematic aspect of large-scale events.

  3. Compact RFID Enabled Moisture Sensor

    Directory of Open Access Journals (Sweden)

    U. H. Khan

    2016-09-01

    Full Text Available This research proposes a novel, low-cost RFID tag sensor antenna implemented using commercially available Kodak photo-paper. The aim of this paper is to investigate the possibility of stable, RFID centric communication under varying moisture levels. Variation in the frequency response of the RFID tag in presence of moisture is used to detect different moisture levels. Combination of unique jaw shaped contours and T-matching network is used for impedance matching which results in compact size and minimal ink consumption. Proposed tag is 1.4 × 9.4 cm2 in size and shows optimum results for various moisture levels upto 45% in FCC band with a bore sight read range of 12.1 m.

  4. OPTIMAL NETWORK TOPOLOGY DESIGN

    Science.gov (United States)

    Yuen, J. H.

    1994-01-01

    This program was developed as part of a research study on the topology design and performance analysis for the Space Station Information System (SSIS) network. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. It is intended that this new design technique consider all important performance measures explicitly and take into account the constraints due to various technical feasibilities. In the current program, technical constraints are taken care of by the user properly forming the starting set of candidate components (e.g. nonfeasible links are not included). As subsets are generated, they are tested to see if they form an acceptable network by checking that all requirements are satisfied. Thus the first acceptable subset encountered gives the cost-optimal topology satisfying all given constraints. The user must sort the set of "feasible" link elements in increasing order of their costs. The program prompts the user for the following information for each link: 1) cost, 2) connectivity (number of stations connected by the link), and 3) the stations connected by that link. Unless instructed to stop, the program generates all possible acceptable networks in increasing order of their total costs. The program is written only to generate topologies that are simply connected. Tests on reliability, delay, and other performance measures are discussed in the documentation, but have not been incorporated into the program. This program is written in PASCAL for interactive execution and has been implemented on an IBM PC series computer operating under PC DOS. The disk contains source code only. This program was developed in 1985.

  5. Designing for Networked Communications

    DEFF Research Database (Denmark)

    Designing for Networked Communications: Strategies and Development explains how to plan, use, and understand the products and the dynamic social processes and tasks some of the most vital innovations in the knowledge society depend upon– social as well as technological. Focusing on various forms...... of design, implementation and integration of computer mediated communication, this book bridges the academic fields of computer science and communication studies. Designing for Networked Communications: Strategies and Development uses an interdisciplinary approach, and presents results from recent...... and important research in a variety of forms for networked communications. A constructive and critical view of the interplay between the new electronic and the more conventional modes of communication are utilized, while studies of organizational work practices demonstrate that the use of new technologies...

  6. Design and Development of a Clinical Risk Management Tool Using Radio Frequency Identification (RFID).

    Science.gov (United States)

    Pourasghar, Faramarz; Tabrizi, Jafar Sadegh; Yarifard, Khadijeh

    2016-04-01

    Patient safety is one of the most important elements of quality of healthcare. It means preventing any harm to the patients during medical care process. This paper introduces a cost-effective tool in which the Radio Frequency Identification (RFID) technology is used to identify medical errors in hospital. The proposed clinical error management system (CEMS) is consisted of a reader device, a transfer/receiver device, a database and managing software. The reader device works using radio waves and is wireless. The reader sends and receives data to/from the database via the transfer/receiver device which is connected to the computer via USB port. The database contains data about patients' medication orders. The CEMS has the ability to identify the clinical errors before they occur and then warns the care-giver with voice and visual messages to prevent the error. This device reduces the errors and thus improves the patient safety. A new tool including software and hardware was developed in this study. Application of this tool in clinical settings can help the nurses prevent medical errors. It can also be a useful tool for clinical risk management. Using this device can improve the patient safety to a considerable extent and thus improve the quality of healthcare.

  7. Design and implementation of a high sensitivity fully integrated passive UHF RFID tag

    International Nuclear Information System (INIS)

    Li Shoucheng; Wang Xin'an; Lin Ke; Shen Jinpeng; Zhang Jinhai

    2014-01-01

    A fully integrated passive UHF RFID tag complying with the ISO18000-6B protocol is presented, which includes an analog front-end, a baseband processor, and an EEPROM memory. To extend the communication range, a high efficiency differential-drive CMOS rectifier is adopted. A novel high performance voltage limiter is used to provide a stable limiting voltage, with a 172 mV voltage variation against temperature variation and process dispersion. The dynamic band-enhancement technique is used in the regulator circuit to improve the regulating capacity. A rail-to-rail hysteresis comparator is adopted to demodulate the signal correctly in any condition. The whole transponder chip is implemented in a 0.18 μm CMOS process, with a die size of 900 × 800 μm 2 . Our measurement results show that the total power consumption of the tag chip is only 6.8 μW, with a sensitivity of −13.5 dBm (semiconductor integrated circuits)

  8. Design of an Embedded CMOS Temperature Sensor for Passive RFID Tag Chips.

    Science.gov (United States)

    Deng, Fangming; He, Yigang; Li, Bing; Zhang, Lihua; Wu, Xiang; Fu, Zhihui; Zuo, Lei

    2015-05-18

    This paper presents an ultra-low embedded power temperature sensor for passive RFID tags. The temperature sensor converts the temperature variation to a PTAT current, which is then transformed into a temperature-controlled frequency. A phase locked loop (PLL)-based sensor interface is employed to directly convert this temperature-controlled frequency into a corresponding digital output without an external reference clock. The fabricated sensor occupies an area of 0.021 mm2 using the TSMC 0.18 1P6M mixed-signal CMOS process. Measurement results of the embedded sensor within the tag system shows a 92 nW power dissipation under 1.0 V supply voltage at room temperature, with a sensing resolution of 0.15 °C/LSB and a sensing accuracy of -0.7/0.6 °C from -30 °C to 70 °C after 1-point calibration at 30 °C.

  9. Design of a Programmable Passive SoC for Biomedical Applications Using RFID ISO 15693/NFC5 Interface

    Directory of Open Access Journals (Sweden)

    Mayukh Bhattacharyya

    2018-01-01

    Full Text Available Low power, low cost inductively powered passive biotelemetry system involving fully customized RFID/NFC interface base SoC has gained popularity in the last decades. However, most of the SoCs developed are application specific and lacks either on-chip computational or sensor readout capability. In this paper, we present design details of a programmable passive SoC in compliance with ISO 15693/NFC5 standard for biomedical applications. The integrated system consists of a 32-bit microcontroller, a sensor readout circuit, a 12-bit SAR type ADC, 16 kB RAM, 16 kB ROM and other digital peripherals. The design is implemented in a 0.18 μ m CMOS technology and used a die area of 1.52 mm × 3.24 mm. The simulated maximum power consumption of the analog block is 592 μ W. The number of external components required by the SoC is limited to an external memory device, sensors, antenna and some passive components. The external memory device contains the application specific firmware. Based on the application, the firmware can be modified accordingly. The SoC design is suitable for medical implants to measure physiological parameters like temperature, pressure or ECG. As an application example, the authors have proposed a bioimplant to measure arterial blood pressure for patients suffering from Peripheral Artery Disease (PAD.

  10. Optimal Network-Topology Design

    Science.gov (United States)

    Li, Victor O. K.; Yuen, Joseph H.; Hou, Ting-Chao; Lam, Yuen Fung

    1987-01-01

    Candidate network designs tested for acceptability and cost. Optimal Network Topology Design computer program developed as part of study on topology design and analysis of performance of Space Station Information System (SSIS) network. Uses efficient algorithm to generate candidate network designs consisting of subsets of set of all network components, in increasing order of total costs and checks each design to see whether it forms acceptable network. Technique gives true cost-optimal network and particularly useful when network has many constraints and not too many components. Program written in PASCAL.

  11. On IPTV network design

    Science.gov (United States)

    Li, Guangzhi; Wang, Dongmei

    2007-11-01

    With more service providers making considerable investments to roll out multimedia services using IP technology, multimedia distribution, especially broadcast TV distribution over an IP network, the so called IPTV, is expected to grow impressively over coming years. However, there are confusing concepts and claims for this new technology: What is IPTV? Why do we need IPTV? How does it work? What are the requirements to design an efficient IPTV network? Are there any research problems? What are the solutions? In this paper, we will try to provide initial answers to all those questions based on our understanding and research work.

  12. Chipless RFID reader architecture

    CERN Document Server

    Karmakar, Nemai Chandra; Kalansuriya, Prasanna

    2013-01-01

    In the era of information communication technology (ICT), radio frequency identification (RFID) has been going through tremendous development. RFID technology has the potential of replacing barcodes due to its large information carrying capacity, flexibility in operations, and applications. The deployment of RFID has been hindered by its cost. However, with the advent of low powered ICs, energy scavenging techniques, and low-cost chipless tags, RFID technology has achieved significant development. This book addresses the new reader architecture, presents fundamentals of chipless RFID systems,

  13. Liner Service Network Design

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard

    . The research field of liner shipping network design is relatively young and many open research questions exists. Among others, a unified and rich mathematical model formulating the main characteristics of the business domain has not been clearly described and exact methods for such mathematical models...... management is of great concern to liner shippers as 70-80% of vessel round trips experience delays in at least one port. A novel mathematical model for handling a disruption using a series of recovery techniques is presented as the The Vessel Schedule Recovery Problem. The model has been applied to four real...... is based upon improving the constructed solution by applying an IP model as a large scale neighbourhood to each service in the network. The IP is based on estimating the benefit of inserting and removing port calls within a predefined neighborhood of candidate ports. Furthermore, the heuristic applies...

  14. Improvement of Supply Chain Performances Using RFID Technology

    OpenAIRE

    Turcu, Cornel; Turcu, Cristina; Graur, Adrian

    2009-01-01

    This chapter helps to improve readers understanding of the RFID and EPC potential for business processes. RFID technology is classified as a wireless AIDC technology that uses digital data encoded into a radio tag embedding a microchip with an antenna. The data stored on the tag is collected by a reader using radio waves. There are a large variety of RFID tags designs; they also have many different functional characteristics such as power source, carrier frequency, read range, data storage ca...

  15. Assessment of RFID Read Accuracy for ISS Water Kit

    Science.gov (United States)

    Chu, Andrew

    2011-01-01

    The Space Life Sciences Directorate/Medical Informatics and Health Care Systems Branch (SD4) is assessing the benefits Radio Frequency Identification (RFID) technology for tracking items flown onboard the International Space Station (ISS). As an initial study, the Avionic Systems Division Electromagnetic Systems Branch (EV4) is collaborating with SD4 to affix RFID tags to a water kit supplied by SD4 and studying the read success rate of the tagged items. The tagged water kit inside a Cargo Transfer Bag (CTB) was inventoried using three different RFID technologies, including the Johnson Space Center Building 14 Wireless Habitat Test Bed RFID portal, an RFID hand-held reader being targeted for use on board the ISS, and an RFID enclosure designed and prototyped by EV4.

  16. Modeling of RFID-Enabled Real-Time Manufacturing Execution System in Mixed-Model Assembly Lines

    Directory of Open Access Journals (Sweden)

    Zhixin Yang

    2015-01-01

    Full Text Available To quickly respond to the diverse product demands, mixed-model assembly lines are well adopted in discrete manufacturing industries. Besides the complexity in material distribution, mixed-model assembly involves a variety of components, different process plans and fast production changes, which greatly increase the difficulty for agile production management. Aiming at breaking through the bottlenecks in existing production management, a novel RFID-enabled manufacturing execution system (MES, which is featured with real-time and wireless information interaction capability, is proposed to identify various manufacturing objects including WIPs, tools, and operators, etc., and to trace their movements throughout the production processes. However, being subject to the constraints in terms of safety stock, machine assignment, setup, and scheduling requirements, the optimization of RFID-enabled MES model for production planning and scheduling issues is a NP-hard problem. A new heuristical generalized Lagrangian decomposition approach has been proposed for model optimization, which decomposes the model into three subproblems: computation of optimal configuration of RFID senor networks, optimization of production planning subjected to machine setup cost and safety stock constraints, and optimization of scheduling for minimized overtime. RFID signal processing methods that could solve unreliable, redundant, and missing tag events are also described in detail. The model validity is discussed through algorithm analysis and verified through numerical simulation. The proposed design scheme has important reference value for the applications of RFID in multiple manufacturing fields, and also lays a vital research foundation to leverage digital and networked manufacturing system towards intelligence.

  17. Design of an ultra-low-power digital processor for passive UHF RFID tags

    Energy Technology Data Exchange (ETDEWEB)

    Shi Wanggen; Zhuang Yiqi; Li Xiaoming; Wang Xianghua; Jin Zhao; Wang Dan, E-mail: wanggen_shi@163.co [Key Laboratory of the Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, Institute of Microelectronics, Xidian University, Xi' an 710071 (China)

    2009-04-15

    A new architecture of digital processors for passive UHF radio-frequency identification tags is proposed. This architecture is based on ISO/IEC 18000-6C and targeted at ultra-low power consumption. By applying methods like system-level power management, global clock gating and low voltage implementation, the total power of the design is reduced to a few microwatts. In addition, an innovative way for the design of a true RNG is presented, which contributes to both low power and secure data transaction. The digital processor is verified by an integrated FPGA platform and implemented by the Synopsys design kit for ASIC flows. The design fits different CMOS technologies and has been taped out using the 2P4M 0.35 mum process of Chartered Semiconductor.

  18. Design of an ultra-low-power digital processor for passive UHF RFID tags

    International Nuclear Information System (INIS)

    Shi Wanggen; Zhuang Yiqi; Li Xiaoming; Wang Xianghua; Jin Zhao; Wang Dan

    2009-01-01

    A new architecture of digital processors for passive UHF radio-frequency identification tags is proposed. This architecture is based on ISO/IEC 18000-6C and targeted at ultra-low power consumption. By applying methods like system-level power management, global clock gating and low voltage implementation, the total power of the design is reduced to a few microwatts. In addition, an innovative way for the design of a true RNG is presented, which contributes to both low power and secure data transaction. The digital processor is verified by an integrated FPGA platform and implemented by the Synopsys design kit for ASIC flows. The design fits different CMOS technologies and has been taped out using the 2P4M 0.35 μm process of Chartered Semiconductor.

  19. Reverse Logistics: RFID the key to optimality

    Directory of Open Access Journals (Sweden)

    Rezwan Asif

    2011-07-01

    Full Text Available Purpose: The purpose of this paper is to find ways to reduce uncertainties in Reverse logistic supply chain (RLSC through the use of Radio-frequency identification (RFID technology.Design/methodology/approach: This paper reviews literature and builds model to relate RFID with uncertainties in order to optimize Reverse Logistics. Findings: RFID is really efficient to determine and detect quantity, variety and cycle times of returns; however it's not as convenient to determine quality of the returns. The collected information from RFID can be used to standardize the RLSC.Research limitations: Though it’s several and unique advantages some limitations of RFID have been identified in quality and processing sequence, collecting points and different standards, and in global usage.Originality/value: Previous studies in the area of Reverse Logistics and RFID don’t cover all impacts of this technology on RLSC. This review paper has investigated these impacts and offers a model for optimizing the Reverse Logistics Supply Chain.

  20. Teaching RFID Information Systems Security

    Science.gov (United States)

    Thompson, Dale R.; Di, Jia; Daugherty, Michael K.

    2014-01-01

    The future cyber security workforce needs radio frequency identification (RFID) information systems security (INFOSEC) and threat modeling educational materials. A complete RFID security course with new learning materials and teaching strategies is presented here. A new RFID Reference Model is used in the course to organize discussion of RFID,…

  1. RFID Malware: Truth vs. Myth

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    The issues related to RFID malware along with proof-of-concept RFID virus are discussed. RFID exploits are traditionally hacking attacks that are identical to those found on Internet, such as buffer overflow, code insertion, and SQL injection attack. RFID warms copy the original exploit code to

  2. Reverse engineering of RFID devices

    NARCIS (Netherlands)

    Bokslag, W.

    2015-01-01

    This paper discusses the relevance and potential impact of both RFID and reverse engineering of RFID technology, followed by a discussion of common protocols and internals of RFID technology. The focus of the paper is on providing an overview of the different approaches to reverse engineering RFID

  3. Network Analysis, Architecture, and Design

    CERN Document Server

    McCabe, James D

    2007-01-01

    Traditionally, networking has had little or no basis in analysis or architectural development, with designers relying on technologies they are most familiar with or being influenced by vendors or consultants. However, the landscape of networking has changed so that network services have now become one of the most important factors to the success of many third generation networks. It has become an important feature of the designer's job to define the problems that exist in his network, choose and analyze several optimization parameters during the analysis process, and then prioritize and evalua

  4. Increased operational range for implantable UHF RFID antennas

    NARCIS (Netherlands)

    Dubok, A.; Smolders, A.B.

    2014-01-01

    This paper discusses the main design challenges of implantable UHF RFID antennas in lossy environments. A novel cylindrical implantable antenna concept is presented. The proposed antenna shows good performance inside lossy environments, like a human body. The RFID tag is able to work in a range up

  5. Optical network design and planning

    CERN Document Server

    Simmons, Jane M

    2014-01-01

    This book takes a pragmatic approach to designing state-of-the-art optical networks for backbone, regional, and metro-core networks.   Algorithms and methodologies related to routing, regeneration, wavelength assignment, subrate-traffic grooming, and protection are presented, with an emphasis on optical-bypass-enabled (or all-optical) networks. There are numerous case studies throughout the text to illustrate the concepts, using realistic networks and traffic sets. A full chapter of economic studies offers guidelines as to when and how optical-bypass technology should be deployed. There is also extensive coverage of recent research to provide insight into how optical networks are likely to evolve. The second edition includes new chapters on dynamic optical networking and flexible/elastic optical networks. There is expanded coverage of new physical-layer technology and its impact on network design, along with enhanced coverage of ROADM architectures, including the colorless, directionless, contentionless, a...

  6. RFID Application of Smart Grid for Asset Management

    Directory of Open Access Journals (Sweden)

    Xiwei Wang

    2013-01-01

    Full Text Available RFID technology research has resolved practical application issues of the power industry such as assets management, working environment control, and vehicle networking. Also it provides technical reserves for the convergence of ERP and CPS. With the development of RFID and location-based services technology, RFID is converging with a variety of sensing, communication, and information technologies. Indoor positioning applications are under rapid development. Micromanagement environment of the assets is a useful practice for the RFID and positioning. In this paper, the model for RFID applications has been analyzed in the microenvironment management of the data center and electric vehicle batteries, and the optimization scheme of enterprise asset management is also proposed.

  7. Understanding and designing computer networks

    CERN Document Server

    King, Graham

    1995-01-01

    Understanding and Designing Computer Networks considers the ubiquitous nature of data networks, with particular reference to internetworking and the efficient management of all aspects of networked integrated data systems. In addition it looks at the next phase of networking developments; efficiency and security are covered in the sections dealing with data compression and data encryption; and future examples of network operations, such as network parallelism, are introduced.A comprehensive case study is used throughout the text to apply and illustrate new techniques and concepts as th

  8. RNEDE: Resilient Network Design Environment

    Energy Technology Data Exchange (ETDEWEB)

    Venkat Venkatasubramanian, Tanu Malik, Arun Giridh; Craig Rieger; Keith Daum; Miles McQueen

    2010-08-01

    Modern living is more and more dependent on the intricate web of critical infrastructure systems. The failure or damage of such systems can cause huge disruptions. Traditional design of this web of critical infrastructure systems was based on the principles of functionality and reliability. However, it is increasingly being realized that such design objectives are not sufficient. Threats, disruptions and faults often compromise the network, taking away the benefits of an efficient and reliable design. Thus, traditional network design parameters must be combined with self-healing mechanisms to obtain a resilient design of the network. In this paper, we present RNEDEa resilient network design environment that that not only optimizes the network for performance but tolerates fluctuations in its structure that result from external threats and disruptions. The environment evaluates a set of remedial actions to bring a compromised network to an optimal level of functionality. The environment includes a visualizer that enables the network administrator to be aware of the current state of the network and the suggested remedial actions at all times.

  9. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  10. Competitive Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad

    .The contributions of this thesis cover modeling, methodology, and applications.The developed methods address operational (cargo routing), tactical (speed optimization and service selection), and strategic (network design) planning problems faced by liner shipping companies. Ultimately, the proposed methods help...... take the container transportation times that can be realized in the network nor the number of transshipments into consideration. This is mainly because the optimization problem is based on other transportation networks where these constraints are not decisive to the quality of the network. Furthermore......, the problem in itself is challenging to optimize due to its size and complexity. However, the field has seen crucial progress and is mature to include handling of competitiveness in the actual design of the network.As a liner shipping network is an organic entity, which is constantly changed to reflect...

  11. Improved Kalman Filter Method for Measurement Noise Reduction in Multi Sensor RFID Systems

    Directory of Open Access Journals (Sweden)

    Min Chul Kim

    2011-10-01

    Full Text Available Recently, the range of available Radio Frequency Identification (RFID tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less Mean Squared Error (MSE than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.

  12. Improved Kalman filter method for measurement noise reduction in multi sensor RFID systems.

    Science.gov (United States)

    Eom, Ki Hwan; Lee, Seung Joon; Kyung, Yeo Sun; Lee, Chang Won; Kim, Min Chul; Jung, Kyung Kwon

    2011-01-01

    Recently, the range of available radio frequency identification (RFID) tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less mean squared error (MSE) than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.

  13. Intelligent distribution network design

    NARCIS (Netherlands)

    Provoost, F.

    2009-01-01

    Distribution networks (medium voltage and low voltage) are subject to changes caused by re-regulation of the energy supply, economical and environmental constraints more sensitive equipment, power quality requirements and the increasing penetration of distributed generation. The latter is seen as

  14. Group-ID based RFID Mutual Authentication

    Directory of Open Access Journals (Sweden)

    LEE, Y.

    2013-11-01

    Full Text Available For passive type RFID tags, EPCglobal Class 1 Generation-2 Revision is used widely as a de facto standard. As it was designed for low cost, it is quite vulnerable to security issues, such as privacy concerns. This paper presents a new RFID mutual authentication protocol, which is designed to be configured on EPC Gen2 platform and to meet various security requirements while providing efficiency using PRNG (Pseudo Random Number Generator. Group-ID is used to minimize the authentication time. Security analysis of the proposed protocol is discussed.

  15. New IoT proximity service based heterogeneous RFID readers collision control

    Directory of Open Access Journals (Sweden)

    Jose Ignacio Tamayo Segarra

    2017-08-01

    Full Text Available Purpose – Internet of Things’ (IoT’s first wave started with tracking services for better inventory management mainly using radio frequency identification (RFID technology. Later on, monitoring services became one of the major interests, including sensing technologies, and then more actuation for remote control-type of IoT applications such as smart homes, smart cities and Industry 4.0. In this paper, the authors focus on the RFID technology impairment. They propose to take advantage of the mature IoT technologies that offer native service discovery such as blutooth or LTE D2D ProSe or Wifi Direct. Using the automatic service discovery in the new framework will make heterogeneous readers aware of the presence of other readers and this will be used by the proposed distributed algorithm to better control the multiple RFID reader interference problem. The author clearly considers emerging Industry 4.0 use case, where RFID technology is of major interest for both identification and tracking. To enhance the RFID tag reading performance, collisions in the RFID frequency should be minimized with reader-to-reader coordination protocols. In this paper, the author proposes a simple distributed reader anti-collision protocol named DiSim that makes use of proximity services of IoT network and is compliant with the current RFID standards. The author evaluates the efficiency of the proposal via simulation. Design/methodology/approach – In this paper, the author proposes a simple distributed reader anti-collision protocol named DiSim that makes use of proximity services of IoT network and is compliant with the current RFID standards. The author evaluates the efficiency of the proposal via simulation to study its behavior in very dense and heterogeneous RFID environments. Specifically, the author explores the coexistence of powerful static readers and small mobile readers, comparing the proposal with a standard ETSI CSMA method. The proposal reduces

  16. Evolution of RFID Applications in Construction: A Literature Review

    Science.gov (United States)

    Valero, Enrique; Adán, Antonio; Cerrada, Carlos

    2015-01-01

    Radio frequency identification (RFID) technology has been widely used in the field of construction during the last two decades. Basically, RFID facilitates the control on a wide variety of processes in different stages of the lifecycle of a building, from its conception to its inhabitance. The main objective of this paper is to present a review of RFID applications in the construction industry, pointing out the existing developments, limitations and gaps. The paper presents the establishment of the RFID technology in four main stages of the lifecycle of a facility: planning and design, construction and commission and operation and maintenance. Concerning this last stage, an RFID application aiming to facilitate the identification of pieces of furniture in scanned inhabited environments is presented. Conclusions and future advances are presented at the end of the paper. PMID:26151210

  17. Multimodal network design and assessment

    NARCIS (Netherlands)

    Brands, Ties; Alkim, T.P.; van Eck, Gijs; van Arem, Bart; Arentze, T.

    2010-01-01

    A framework is proposed for the design of an optimal multimodal transport network for the Randstad area. This research framework consists of a multi-objective optimization heuristic and a fast network assessment module, which results in a set of Pareto optimal solutions. Subsequently, a proper

  18. Approximability of Robust Network Design

    NARCIS (Netherlands)

    Olver, N.K.; Shepherd, F.B.

    2014-01-01

    We consider robust (undirected) network design (RND) problems where the set of feasible demands may be given by an arbitrary convex body. This model, introduced by Ben-Ameur and Kerivin [Ben-Ameur W, Kerivin H (2003) New economical virtual private networks. Comm. ACM 46(6):69-73], generalizes the

  19. An RFID Based Smart Feeder for Hummingbirds.

    Science.gov (United States)

    Ibarra, Vicente; Araya-Salas, Marcelo; Tang, Yu-ping; Park, Charlie; Hyde, Anthony; Wright, Timothy F; Tang, Wei

    2015-12-16

    We present an interdisciplinary effort to record feeding behaviors and control the diet of a hummingbird species (Phaethornis longirostris, the long-billed hermit or LBH) by developing a Radio Frequency Identification (RFID) based smart feeder. The system contains an RFID reader, a microcontroller, and a servo-controlled hummingbird feeder opener; the system is presented as a tool for studying the cognitive ability of the LBH species. When equipped with glass capsule RFID tags (which are mounted on the hummingbird), the smart feeder can provide specific diets for predetermined sets of hummingbirds at the discretion of biologists. This is done by reading the unique RFID tag on the hummingbirds and comparing the ID number with the pre-programmed ID numbers stored in the smart feeder. The smart feeder records the time and ID of each hummingbird visit. The system data is stored in a readily available SD card and is powered by two 9 V batteries. The detection range of the system is approximately 9-11 cm. Using this system, biologists can assign the wild hummingbirds to different experimental groups and monitor their diets to determine if they develop a preference to any of the available nectars. During field testing, the smart feeder system has demonstrated consistent detection (when compared to detections observed by video-recordings) of RFID tags on hummingbirds and provides pre-designed nectars varying water and sugar concentrations to target individuals. The smart feeder can be applied to other biological and environmental studies in the future.

  20. Pallet Management System: A Study of the Implementation of UID/RFID Technology for Tracking Shipping Materials Within the Department of Defense Distribution Network

    Science.gov (United States)

    2008-06-01

    San Diego (DDDC). • Conduct a site visit to the Pepsi /Quaker Oats Distribution Center, Tracy, CA. • Conduct a review and analysis of typical DoD...numbers—into inventory, sales, purchasing, marketing , and similar database systems distributed throughout an enterprise.(Sweeney, 2005) It can be seen as...Presentation. Air Force Material Command. RFID Product News (2005). Marketing Benefits Tops in RFID Adoption, Says Study. Retrieved May 29, 2008, from

  1. The adoption and implementation of RFID technologies in healthcare: a literature review.

    Science.gov (United States)

    Yao, Wen; Chu, Chao-Hsien; Li, Zang

    2012-12-01

    Radio Frequency Identification (RFID) technology not only offers tracking capability to locate equipment, supplies and people in real time, but also provides efficient and accurate access to medical data for health professionals. However, the reality of RFID adoption in healthcare is far behind earlier expectation. This study reviews literature on the use of RFID in healthcare/hospitals following a formal innovation-decision framework. We aim to identify the common applications, potential benefits, barriers, and critical success factors. Our study facilitates quick assessment and provides guidance for researchers and practitioners in adopting RFID in medical arenas. Many earlier adopters in healthcare found RFID to be functional and useful in such areas as asset tracking and patient identification. Major barriers to adoption include technological limitations, interference concerns, prohibitive costs, lack of global standards and privacy concerns. Better designed RFID systems with low cost and privacy issues addressed are needed to increase acceptance of RFID in healthcare.

  2. The Evolution of RFID Security

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    The advantages and drawbacks associated with the use of RFID technology, are discussed. The RFID functions as a medium for numerous tasks including managing supply chains, tracking livestock, preventing counterfeiting, controlling building access, supporting automated checkout, developing smart home

  3. Non-foster matching of an RFID antenna

    KAUST Repository

    Mohamed Hassan Salem, Nedime Pelin

    2011-07-01

    Novel designs of radio-frequency identification (RFID) tag antennas with better matching characteristics to achieve extended range for passive tags are investigated in ultra-high frequency (UHF) band. A microstrip dipole antenna with or without an integrated negative impedance converter designed to cancel out the antenna\\'s input capacitance at resonance frequency was designed, simulated, constructed and measured for implementation in RFID applications. © 2011 IEEE.

  4. Introducing RFID at Middlesex University Learning Resources

    Science.gov (United States)

    Hopkinson, Alan; Chandrakar, Rajesh

    2006-01-01

    Purpose: To describe the first year of the implementation of radio frequency identification (RFID) in Middlesex University Learning Resources. Design/methodology/approach: The technology is explained in detail to set the scene. Information on the implementation is presented in chronological order. Findings: Problems which would generally be…

  5. Non-foster matching of an RFID antenna

    KAUST Repository

    Mohamed Hassan Salem, Nedime Pelin; Niver, Edip

    2011-01-01

    Novel designs of radio-frequency identification (RFID) tag antennas with better matching characteristics to achieve extended range for passive tags are investigated in ultra-high frequency (UHF) band. A microstrip dipole antenna with or without

  6. A Review of Implementing ADC in RFID Sensor

    Directory of Open Access Journals (Sweden)

    M. Zurita

    2016-01-01

    Full Text Available The general considerations to design a sensor interface for passive RFID tags are discussed. This way, power and timing constraints imposed by ISO/IEC 15693 and ISO/IEC 14443 standards to HF RFID tags are explored. A generic multisensor interface is proposed and a survey analysis on the most suitable analog-to-digital converters for passive RFID sensing applications is reported. The most appropriate converter type and architecture are suggested. At the end, a specific sensor interface for carbon nanotube gas sensors is proposed and a brief discussion about its implemented circuits and preliminary results is made.

  7. Location Privacy in RFID Applications

    Science.gov (United States)

    Sadeghi, Ahmad-Reza; Visconti, Ivan; Wachsmann, Christian

    RFID-enabled systems allow fully automatic wireless identification of objects and are rapidly becoming a pervasive technology with various applications. However, despite their benefits, RFID-based systems also pose challenging risks, in particular concerning user privacy. Indeed, improvident use of RFID can disclose sensitive information about users and their locations allowing detailed user profiles. Hence, it is crucial to identify and to enforce appropriate security and privacy requirements of RFID applications (that are also compliant to legislation). This chapter first discusses security and privacy requirements for RFID-enabled systems, focusing in particular on location privacy issues. Then it explores the advances in RFID applications, stressing the security and privacy shortcomings of existing proposals. Finally, it presents new promising directions for privacy-preserving RFID systems, where as a case study we focus electronic tickets (e-tickets) for public transportation.

  8. Applying radio-frequency identification (RFID) technology in transfusion medicine.

    Science.gov (United States)

    Hohberger, Clive; Davis, Rodeina; Briggs, Lynne; Gutierrez, Alfonso; Veeramani, Dhamaraj

    2012-05-01

    ISO/IEC 18000-3 mode 1 standard 13.56 MHz RFID tags have been accepted by the International Society for Blood Transfusion (ISBT) and the United States Food and Drug Administration (FDA) as data carriers to integrate with and augment ISBT 128 barcode data carried on blood products. The use of 13.56 MHz RFID carrying ISBT 128 data structures allows the global deployment and use of RFID, supporting both international transfer of blood and international disaster relief. The deployment in process at the BloodCenter of Wisconsin and testing at the University of Iowa Health Center is the first FDA-permitted implementation of RFID throughout in all phases of blood banking, donation through transfusion. RFID technology and equipment selection will be discussed along with FDA-required RF safety testing; integration with the blood enterprise computing system and required RFID tag performance. Tag design and survivability is an issue due to blood bag centrifugation and irradiation. Deployment issues will be discussed. Use of RFID results in significant return on investment over the use of barcodes in the blood center operations through labor savings and error reduction. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  9. RFID Student Educational Experiences at the UNT College of Engineering: A Sequential Approach to Creating a Project-Based RFID Course

    Science.gov (United States)

    Vaidyanathan, V. V.; Varanasi, M. R.; Kougianos, E.; Wang, Shuping; Raman, H.

    2009-01-01

    This paper describes radio frequency identification (RFID) projects, designed and implemented by students in the College of Engineering at the University of North Texas, as part of their senior-design project requirement. The paper also describes an RFID-based project implemented at Rice Middle School in Plano, TX, which went on to win multiple…

  10. A warning system based on the RFID technology for running-out of injection fluid.

    Science.gov (United States)

    Huang, Chi-Fang; Lin, Jen-Hung

    2011-01-01

    For providing an automatic warning system of running-out of injection fluid, RFID technology is applied in this work to propose an infrastructure with low cost to help nurses and patient's company. Specially, a RFID tag is designed and attached on a bag of intravenous drip to demonstrate the benefits in the present system. The main idea of this system is that, tag is disabled when the bag is not empty because of the EM loading due to the liquid contained. The bag can be any kind in the current market and be without any electronic attachment or modification. LAN (Local Area Network) is also applied as a part of this infrastructure for data transmission.

  11. Automated minimax design of networks

    DEFF Research Database (Denmark)

    Madsen, Kaj; Schjær-Jacobsen, Hans; Voldby, J

    1975-01-01

    A new gradient algorithm for the solution of nonlinear minimax problems has been developed. The algorithm is well suited for automated minimax design of networks and it is very simple to use. It compares favorably with recent minimax and leastpth algorithms. General convergence problems related...

  12. Energy-balanced algorithm for RFID estimation

    Science.gov (United States)

    Zhao, Jumin; Wang, Fangyuan; Li, Dengao; Yan, Lijuan

    2016-10-01

    RFID has been widely used in various commercial applications, ranging from inventory control, supply chain management to object tracking. It is necessary for us to estimate the number of RFID tags deployed in a large area periodically and automatically. Most of the prior works use passive tags to estimate and focus on designing time-efficient algorithms that can estimate tens of thousands of tags in seconds. But for a RFID reader to access tags in a large area, active tags are likely to be used due to their longer operational ranges. But these tags use their own battery as energy supplier. Hence, conserving energy for active tags becomes critical. Some prior works have studied how to reduce energy expenditure of a RFID reader when it reads tags IDs. In this paper, we study how to reduce the amount of energy consumed by active tags during the process of estimating the number of tags in a system and make the energy every tag consumed balanced approximately. We design energy-balanced estimation algorithm that can achieve our goal we mentioned above.

  13. Telecommunications network modelling, planning and design

    CERN Document Server

    Evans, Sharon

    2003-01-01

    Telecommunication Network Modelling, Planning and Design addresses sophisticated modelling techniques from the perspective of the communications industry and covers some of the major issues facing telecommunications network engineers and managers today. Topics covered include network planning for transmission systems, modelling of SDH transport network structures and telecommunications network design and performance modelling, as well as network costs and ROI modelling and QoS in 3G networks.

  14. Designing Indonesian Liner Shipping Network

    Directory of Open Access Journals (Sweden)

    Armand Omar Moeis

    2017-06-01

    Full Text Available As the largest archipelago nation in the world, Indonesia’s logistics system has not shown excellence according to the parameters of logistics performance index and based on logistics costs percentages from overall GDP. This is due to the imbalances of trading on the western and eastern regions in Indonesia, which impacts the transportation systems costs to and from the eastern regions. Therefore, it is imperative to improve the competitiveness of Indonesian maritime logistics through maritime logistics network design. This research will focus on three levels of decision making in logistics network design, which include type of ships in the strategic level, shipping routes in the tactical level, and container allocation in the operational level with implementing butterfly routes in Indonesia’s logistics networking problems. Furthermore, this research will analyze the impact of Pendulum Nusantara and Sea Toll routes against the company profits and percentages of containers shipped. This research will also foresee how demand uncertainties and multi-period planning should affect decision making in designing the Indonesian Liner Shipping Network.

  15. Competitive Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Brouer, Berit Dangaard; Pisinger, David

    2017-01-01

    We present a solution method for the liner shipping network design problem which is a core strategic planning problem faced by container carriers. We propose the first practical algorithm which explicitly handles transshipment time limits for all demands. Individual sailing speeds at each service...... leg are used to balance sailing speed against operational costs, hence ensuring that the found network is competitive on both transit time and cost. We present a matheuristic for the problem where a MIP is used to select which ports should be inserted or removed on a route. Computational results...

  16. Competitive Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Brouer, Berit Dangaard; Pisinger, David

    We present a solution method for the liner shipping network design problem which is a core strategic planning problem faced by container carriers. We propose the first practical algorithm which explicitly handles transshipment time limits for all demands. Individual sailing speeds at each service...... leg are used to balance sailings speed against operational costs, hence ensuring that the found network is competitive on both transit time and cost. We present a matheuristic for the problem where a MIP is used to select which ports should be inserted or removed on a route. Computational results...

  17. An Analysis of Information Assurance Relating to the Department of Defense Radio Frequency Identification (RFID) Passive Network

    National Research Council Canada - National Science Library

    Giovannetti, Robert G

    2005-01-01

    .... Despite the many conveniences to automate and improve asset tracking this technology offers, consumer groups have obstinately opposed this adoption due to the perceived weaknesses in security and privacy of the network...

  18. UHF RFID tag implementation on cork substrate for wine bottle monitoring

    OpenAIRE

    Rima Martí, Sergi; Georgiadis, Apostolos

    2013-01-01

    Wine industry is starting to deploy RFID technology for production control, logistics or innovative marketing. However, identifying wine bottles is difficult due to the unfavorable material content for the operation of the antennas. The thesis consists on the implementation of a UHF RFID tag placed on cork substrate in order to provide a feasible way of identifying wine packaged bottle. The proposed RFID tag consists on a meandered line dipole antenna, designed to be conformed so that it can ...

  19. Energy-Aware RFID Anti-Collision Protocol.

    Science.gov (United States)

    Arjona, Laura; Simon, Hugo Landaluce; Ruiz, Asier Perallos

    2018-06-11

    The growing interest in mobile devices is transforming wireless identification technologies. Mobile and battery-powered Radio Frequency Identification (RFID) readers, such as hand readers and smart phones, are are becoming increasingly attractive. These RFID readers require energy-efficient anti-collision protocols to minimize the tag collisions and to expand the reader's battery life. Furthermore, there is an increasing interest in RFID sensor networks with a growing number of RFID sensor tags. Thus, RFID application developers must be mindful of tag anti-collision protocols. Energy-efficient protocols involve a low reader energy consumption per tag. This work presents a thorough study of the reader energy consumption per tag and analyzes the main factor that affects this metric: the frame size update strategy. Using the conclusion of this analysis, the anti-collision protocol Energy-Aware Slotted Aloha (EASA) is presented to decrease the energy consumption per tag. The frame size update strategy of EASA is configured to minimize the energy consumption per tag. As a result, EASA presents an energy-aware frame. The performance of the proposed protocol is evaluated and compared with several state of the art Aloha-based anti-collision protocols based on the current RFID standard. Simulation results show that EASA, with an average of 15 mJ consumed per tag identified, achieves a 6% average improvement in the energy consumption per tag in relation to the strategies of the comparison.

  20. The Study on Using Passive RFID Tags for Indoor Positioning

    Directory of Open Access Journals (Sweden)

    S.L. Ting

    2011-02-01

    Full Text Available Radio frequency identification (RFID is the technology that put an RFID tag on objects or people, so that they can be identified, tracked, and managed automatically. With its wide application in the automobile assembly industry, warehouse management and the supply chain network, RFID has been recognized as the next promising technology in serving the positioning purpose. Existing positioning technologies such as GPS are not available indoors as the terminal cannot get the signal from satellites. To enhance the availability of the positioning systems for indoors, the development of RFID positioning system for locating objects or people have became a hot topic in recent research. Compared with conventional active and high‐cost solutions, this paper studied the feasibility of using passive RFID tags for indoor positioning and object location detection to provide real time information for tracking movement. Results of experiment show that readability of the passive RFID positioning system is satisfactory, and it is a more cost effective solution when compared with other positioning technologies.

  1. Computational network design from functional specifications

    KAUST Repository

    Peng, Chi Han; Yang, Yong Liang; Bao, Fan; Fink, Daniel; Yan, Dongming; Wonka, Peter; Mitra, Niloy J.

    2016-01-01

    of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications

  2. Access Control with RFID in the Internet of Things

    DEFF Research Database (Denmark)

    Jensen, Steffen Elstrøm Holst; Jacobsen, Rune Hylsberg

    2013-01-01

    , to the Internet is suggested. The solution uses virtual representations of objects by using low-cost, passive RFID tags to give objects identities on the Internet. A prototype that maps an RFID identity into an IPv6 address is constructed. It is illustrated how this approach can be used in access control systems......Future Internet research is needed to bring the Internet and the Things closer to each other to form the Internet of Things. As objects in our daily life gradually become smarter, there is an increasing benefit of networking these objects. In this article, a method to couple objects, the Things...... based on open network protocols and packet filtering. The solution includes a novel RFID reader architecture that supports the internetworking of components of a future access control system based on network layer technology....

  3. Securing the Use of RFID-Enabled Banknotes

    Science.gov (United States)

    Martínez, Santi; Roig, Concepció; Valls, Magda

    The use of RFID tags (radio-frequency identification tags) in banknotes presents a main challenge that may discourage their usage: how to avoid a possible attacker to count the amount of tags. Such a drawback is faced in this paper by designing an appropriate Medium Access Control (MAC) for this scenario. A MAC is the set of mechanisms and protocols that allows devices to share the communication channel. In a RFID system, a MAC protocol makes it possible for several tags to communicate within a common environment with the RFID reader. In this paper, we present a new MAC protocol that is suitable for ensuring security in the use of RFID-enabled banknotes. It also guarantees privacy and fits scalability requirements when the number of tags is increasing.

  4. RFID solution benefits Cambridge hospital.

    Science.gov (United States)

    James, Andrew

    2013-10-01

    Keeping track of thousands of pieces of equipment in a busy hospital environment is a considerable challenge, but, according to RFID tagging and asset tracking specialist, Harland Simon, RFID technology can make the task considerably simpler. Here Andrew James, the company's RFID sales manager, describes the positive benefits the technology has brought the Medical Equipment Library (MEL) at Addenbrooke's Hospital, one of the world's most famous teaching hospitals.

  5. Cluster-Based Multipolling Sequencing Algorithm for Collecting RFID Data in Wireless LANs

    Science.gov (United States)

    Choi, Woo-Yong; Chatterjee, Mainak

    2015-03-01

    With the growing use of RFID (Radio Frequency Identification), it is becoming important to devise ways to read RFID tags in real time. Access points (APs) of IEEE 802.11-based wireless Local Area Networks (LANs) are being integrated with RFID networks that can efficiently collect real-time RFID data. Several schemes, such as multipolling methods based on the dynamic search algorithm and random sequencing, have been proposed. However, as the number of RFID readers associated with an AP increases, it becomes difficult for the dynamic search algorithm to derive the multipolling sequence in real time. Though multipolling methods can eliminate the polling overhead, we still need to enhance the performance of the multipolling methods based on random sequencing. To that extent, we propose a real-time cluster-based multipolling sequencing algorithm that drastically eliminates more than 90% of the polling overhead, particularly so when the dynamic search algorithm fails to derive the multipolling sequence in real time.

  6. An RFID Based Smart Feeder for Hummingbirds

    Directory of Open Access Journals (Sweden)

    Vicente Ibarra

    2015-12-01

    Full Text Available We present an interdisciplinary effort to record feeding behaviors and control the diet of a hummingbird species (Phaethornis longirostris, the long-billed hermit or LBH by developing a Radio Frequency Identification (RFID based smart feeder. The system contains an RFID reader, a microcontroller, and a servo-controlled hummingbird feeder opener; the system is presented as a tool for studying the cognitive ability of the LBH species. When equipped with glass capsule RFID tags (which are mounted on the hummingbird, the smart feeder can provide specific diets for predetermined sets of hummingbirds at the discretion of biologists. This is done by reading the unique RFID tag on the hummingbirds and comparing the ID number with the pre-programmed ID numbers stored in the smart feeder. The smart feeder records the time and ID of each hummingbird visit. The system data is stored in a readily available SD card and is powered by two 9 V batteries. The detection range of the system is approximately 9–11 cm. Using this system, biologists can assign the wild hummingbirds to different experimental groups and monitor their diets to determine if they develop a preference to any of the available nectars. During field testing, the smart feeder system has demonstrated consistent detection (when compared to detections observed by video-recordings of RFID tags on hummingbirds and provides pre-designed nectars varying water and sugar concentrations to target individuals. The smart feeder can be applied to other biological and environmental studies in the future.

  7. development of a development of a rfid and rfid based library

    African Journals Online (AJOL)

    eobe

    This system use RFID technology to track books ..... The total power requirements for safe operation of the design is 5V at 1.7A, ... Using a 12V, 2A battery with the aid of LM7805, the 5V required ..... But with this system adopted and used, time.

  8. A new platform for RFID research in Vietnam

    International Nuclear Information System (INIS)

    Tran, Ai Nhan; Nguyen, Son Dat; Thai Pham, Duc Hoang; Nguyen, Thuat Tran; Dang, Chien Mau; Fribourg-Blanc, Eric

    2010-01-01

    Radio-Frequency IDentification (RFID) is a technology that has been emerging for less than a decade as the primary choice to exchange information between objects and their environment. Most of the challenges arise due to the passive nature of the tags placed on objects. The absence of a local power source implies that power management is critical for efficient work of the data exchange link. This paper presents the platform under development at the Laboratory for Nanotechnology to study these challenges. The primary goal of the platform is to implement the complete chain from design and simulation of tags to antenna measurements and field tests of tags through fabrication of real tags on flexible substrates. This structure allows for fundamental and practical studies of new concepts in sensing and wireless networks based on passive tags. A description of the actual achievements is also included

  9. A framework for performance and data quality assessment of Radio Frequency IDentification (RFID) systems in health care settings.

    Science.gov (United States)

    van der Togt, Remko; Bakker, Piet J M; Jaspers, Monique W M

    2011-04-01

    RFID offers great opportunities to health care. Nevertheless, prior experiences also show that RFID systems have not been designed and tested in response to the particular needs of health care settings and might introduce new risks. The aim of this study is to present a framework that can be used to assess the performance of RFID systems particularly in health care settings. We developed a framework describing a systematic approach that can be used for assessing the feasibility of using an RFID technology in a particular healthcare setting; more specific for testing the impact of environmental factors on the quality of RFID generated data and vice versa. This framework is based on our own experiences with an RFID pilot implementation in an academic hospital in The Netherlands and a literature review concerning RFID test methods and current insights of RFID implementations in healthcare. The implementation of an RFID system within the blood transfusion chain inside a hospital setting was used as a show case to explain the different phases of the framework. The framework consists of nine phases, including an implementation development plan, RFID and medical equipment interference tests, data accuracy- and data completeness tests to be run in laboratory, simulated field and real field settings. The potential risks that RFID technologies may bring to the healthcare setting should be thoroughly evaluated before they are introduced into a vital environment. The RFID performance assessment framework that we present can act as a reference model to start an RFID development, engineering, implementation and testing plan and more specific, to assess the potential risks of interference and to test the quality of the RFID generated data potentially influenced by physical objects in specific health care environments. Copyright © 2010 Elsevier Inc. All rights reserved.

  10. Interference Helps to Equalize the Read Range and Reduce False Positives of Passive RFID Tags

    DEFF Research Database (Denmark)

    Krigslund, Rasmus; Popovski, Petar; Pedersen, Gert Frølund

    2012-01-01

    In various applications of RFID systems a reader should reliably get the ID of the tags that are within a bounded proximity region, termed the interrogation zone. This gives rise to two types of errors 1) False Negative Detections (FNDs), when tags within the intended interrogation zone cannot...... interference enables design of well-defined interrogation zones for passive RFID systems....

  11. Principles of Selection, Implementation and Utilization of RFID in Supply Chain Management

    Directory of Open Access Journals (Sweden)

    Juraj Vaculik

    2009-01-01

    Full Text Available The paper deals with RFID (Radio Frequency Identificationimplementation and utilization within supply chain managementand also includes the economic feasibility of rollingout RFID. The members of the supply chain networks- suppliers,manufacturers and distributors - will operate independentlyfrom one another and according to their own agendas.This type of unmanaged network, howeve1; results in inefficiencies.The manufacturer might have a goal of maximizing productionin order to minimize unit costs. Clearly, all members ofthe supply chain stand to gain by coordinating their efforts toimprove efficiency and overall supply chain performance. Thisarticle is divided into three parts: Supply chain, Economic feasibilityof rolling out RFID and Processes of Supply chain management.

  12. Using Network Science to Support Design Research

    DEFF Research Database (Denmark)

    Parraguez Ruiz, Pedro; Maier, Anja

    2016-01-01

    and societal impact. This chapter contributes to the use of network science in empirical studies of design organisations. It focuses on introducing a network-based perspective on the design process and in particular on making use of network science to support design research and practice. The main contribution...... of this chapter is an overview of the methodological challenges and core decision points when embarking on network-based design research, namely defining the overall research purpose and selecting network features. We furthermore highlight the potential for using archival data, the opportunities for navigating...

  13. Event Management of RFID Data Streams: Fast Moving Consumer Goods Supply Chains

    Science.gov (United States)

    Mo, John P. T.; Li, Xue

    Radio Frequency Identification (RFID) is a wireless communication technology that uses radio-frequency waves to transfer information between tagged objects and readers without line of sight. This creates tremendous opportunities for linking real world objects into a world of "Internet of things". Application of RFID to Fast Moving Consumer Goods sector will introduce billions of RFID tags in the world. Almost everything is tagged for tracking and identification purposes. This phenomenon will impose a new challenge not only to the network capacity but also to the scalability of processing of RFID events and data. This chapter uses two national demonstrator projects in Australia as case studies to introduce an event managementframework to process high volume RFID data streams in real time and automatically transform physical RFID observations into business-level events. The model handles various temporal event patterns, both simple and complex, with temporal constraints. The model can be implemented in a data management architecture that allows global RFID item tracking and enables fast, large-scale RFID deployment.

  14. Design a Smart Control Strategy to Implement an Intelligent Energy Safety and Management System

    OpenAIRE

    Jing-Min Wang; Ming-Ta Yang

    2014-01-01

    The energy saving and electricity safety are today a cause for increasing concern for homes and buildings. Integrating the radio frequency identification (RFID) and ZigBee wireless sensor network (WSN) mature technologies, the paper designs a smart control strategy to implement an intelligent energy safety and management system (IESMS) which performs energy measuring, controlling, monitoring, and saving of the power outlet system. The presented RFID and billing module is used to identify user...

  15. A study on RFID adoption for vehicle tracking in container terminal

    Directory of Open Access Journals (Sweden)

    S.L. Ting

    2012-06-01

    Full Text Available Purpose: Numerous studies discuss that Radio Frequency Identification (RFID technology can provide better container handling efficiency; however, relative lack of research concerns the tracking and monitoring the movement of vehicle in the container terminal environment. Thus, this study aims at discussing the feasibility of applying RFID for vehicle tracking purpose in a container terminal. Design/methodology/approach: This study makes use of a series of experiments in a container terminal to discuss the factors that affect the use of RFID in the terminal. The possibility and accuracy of using RFID in such challenging environment is also investigated. These propositions are investigated by a case study. Findings: The experimental results indicate that the RFID communication is good at the containers area which occupies nearly all the area in the container terminal. However, in other area such as sea side and free area, the performance is not good and 100% readability only achieved in 5m and 10m in free area and sea side respectively. Originality/value: The container terminal environment, which consists of different transport vehicles for onward transportation, will affect the performance of RFID readability. Poor setup of the RFID reader and tag will lower the feasibility of RFID adoption as well as increase the cost. In order to address the challenges of implementing RFID in the container terminal environment, this paper provides a series of real site testing experiments to study the RFID performance in the container terminal environment. This represents an original contribution of value to future research and practice in the RFID adoptions in container terminal environment.

  16. Computational network design from functional specifications

    KAUST Repository

    Peng, Chi Han

    2016-07-11

    Connectivity and layout of underlying networks largely determine agent behavior and usage in many environments. For example, transportation networks determine the flow of traffic in a neighborhood, whereas building floorplans determine the flow of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications. Such specifications can be in the form of network density, travel time versus network length, traffic type, destination location, etc. We propose an integer programming-based approach that guarantees that the resultant networks are valid by fulfilling all the specified hard constraints and that they score favorably in terms of the objective function. We evaluate our algorithm in two different design settings, street layout and floorplans to demonstrate that diverse networks can emerge purely from high-level functional specifications.

  17. Smart Business Networks Design and Business Genetics

    NARCIS (Netherlands)

    L-F. Pau (Louis-François)

    2006-01-01

    textabstractWith the emergence of smart business networks, agile networks, etc. as important research areas in management, for all the attractiveness of these concepts, a major issue remains around their design and the selection rules. While smart business networks should provide advantages due to

  18. Transmission design in a multimode HFC network

    Science.gov (United States)

    Cambron, G. Keith

    1996-11-01

    Contemporary hybrid fiber coaxial (HFC) networks are capable of supporting a wide range of services including traditional analog video, telephony, digital video, and data services. Each service has unique performance or service requirements. This contribution examines transmission design for one such network. Pacific Bell's advanced communications network (ACN). The design methodology begins with a set of end to end service quality objectives. Network impairments, such as noise, distortion and delay, are allocated across the network elements using a set of standard network models. These models are a representative set of the actual field designs and bound the network operating parameters. Network components, headend equipment, and customer premises equipment are specified analytically or characterized empirically in relationship to the chosen impairment set. The component parameters are then included in analytical models to estimate overall network performance. In addition to the forward path transmission considerations examined by traditional coaxial network designers, other dimensions including power consumption, traffic demand, and message latency are taken into account. Analytical models are used to estimate the effects of multiple modulation schemes within the unified network. The variability introduced by on demand services such as telephony and interactive digital services changes the base computational domain from deterministic models to stochastic ones. These models are then used to set operating parameters at measurable points throughout the network for proof of performance prior to turn up, and for ongoing performance monitoring. For closure, empirical results are compared with model projections as a way of verifying and improving the predictive models.

  19. Potentials of RFID Application in Retailing

    DEFF Research Database (Denmark)

    Foscht, Thomas; Kotzab, Herbert; Maloles III, Cesar

    2008-01-01

    The willingness of retailers to adopt RFID systems, as well as finding optimal RFID applications has yet not been investigated. This paper examines the issues associated with the RFID adoption based on the results of a conjoint analysis. The conjoint measurement looked at the trade-off decisions...... among different possible set-ups of RFID applications in retailing companies. Considerable willingness to adopt, but low diffusion and a structure of preferences with respect to RFID features was shown throughout the examined retailing companies. Furthermore, differences were shown among different types...... of retailers in their preferences for RFID system features and clusters were implied....

  20. Research on pipe welding information management system basedon RFID

    Directory of Open Access Journals (Sweden)

    Liu Xun

    2016-01-01

    Full Text Available This paper introduces the construction background, construction target and construction principle of the pipe welding management system based on RFID. Then, describes the specific requirements of the system. The basic principle and key technology of the system are introduced. The structure of the system (including the system design, the selections of handheld devices and high frequency passive RFID tags is described .Then the system management software designs (including software structure, the main functions of the management center system and the main functions of the handheld detection system are described in detail. Finally, the management system is implemented, and it is deployed to several Gas Co, which has chieved good results.

  1. Analisis dan Perancangan Aplikasi Inventori Berbasiskan Rfid Pada PT. ABC

    Directory of Open Access Journals (Sweden)

    Herwin Herwin

    2010-12-01

    Full Text Available The purpose of this research is to reduce the damaged material, applying the concept of FIFO for retrieval of row materials, and accelerate the search and also to simplify the detection of raw materials. Software development method used involves three main parts namely the method of analysis, design and literature. Analysis methods including survey of the running system, an analysis of survey findings, identify information needs, identify system requirenments. The design method approach to Unified Modelling Language (UML. The results is an inventory application that uses Radio Frequency Identification (RFID tags as a replacement label where RFID tags can store data. Conslusions from this research is minimizing the company’s financial losses due to storage of raw materials and minimizing time to search raw materials using RFID that also can provide actual and accurate information for the company. 

  2. Cross-layer design in optical networks

    CERN Document Server

    Brandt-Pearce, Maïté; Demeester, Piet; Saradhi, Chava

    2013-01-01

    Optical networks have become an integral part of the communications infrastructure needed to support society’s demand for high-speed connectivity.  Cross-Layer Design in Optical Networks addresses topics in optical network design and analysis with a focus on physical-layer impairment awareness and network layer service requirements, essential for the implementation and management of robust scalable networks.  The cross-layer treatment includes bottom-up impacts of the physical and lambda layers, such as dispersion, noise, nonlinearity, crosstalk, dense wavelength packing, and wavelength line rates, as well as top-down approaches to handle physical-layer impairments and service requirements.

  3. RFID-Based Vehicle Positioning and Its Applications in Connected Vehicles

    Science.gov (United States)

    Wang, Jianqiang; Ni, Daiheng; Li, Keqiang

    2014-01-01

    This paper proposed an RFID-based vehicle positioning approach to facilitate connected vehicles applications. When a vehicle passes over an RFID tag, the vehicle position is given by the accurate position stored in the tag. At locations without RFID coverage, the vehicle position is estimated from the most recent tag location using a kinematics integration algorithm till updates from the next tag. The accuracy of RFID positioning is verified empirically in two independent ways with one using radar and the other a photoelectric switch. The former is designed to verify whether the dynamic position obtained from RFID tags matches the position measured by radar that is regarded as accurate. The latter aims to verify whether the position estimated from the kinematics integration matches the position obtained from RFID tags. Both means supports the accuracy of RFID-based positioning. As a supplement to GPS which suffers from issues such as inaccuracy and loss of signal, RFID positioning is promising in facilitating connected vehicles applications. Two conceptual applications are provided here with one in vehicle operational control and the other in Level IV intersection control. PMID:24599188

  4. RFID-Based Vehicle Positioning and Its Applications in Connected Vehicles

    Directory of Open Access Journals (Sweden)

    Jianqiang Wang

    2014-03-01

    Full Text Available This paper proposed an RFID-based vehicle positioning approach to facilitate connected vehicles applications. When a vehicle passes over an RFID tag, the vehicle position is given by the accurate position stored in the tag. At locations without RFID coverage, the vehicle position is estimated from the most recent tag location using a kinematics integration algorithm till updates from the next tag. The accuracy of RFID positioning is verified empirically in two independent ways with one using radar and the other a photoelectric switch. The former is designed to verify whether the dynamic position obtained from RFID tags matches the position measured by radar that is regarded as accurate. The latter aims to verify whether the position estimated from the kinematics integration matches the position obtained from RFID tags. Both means supports the accuracy of RFID-based positioning. As a supplement to GPS which suffers from issues such as inaccuracy and loss of signal, RFID positioning is promising in facilitating connected vehicles applications. Two conceptual applications are provided here with one in vehicle operational control and the other in Level IV intersection control.

  5. RFID-based vehicle positioning and its applications in connected vehicles.

    Science.gov (United States)

    Wang, Jianqiang; Ni, Daiheng; Li, Keqiang

    2014-03-04

    This paper proposed an RFID-based vehicle positioning approach to facilitate connected vehicles applications. When a vehicle passes over an RFID tag, the vehicle position is given by the accurate position stored in the tag. At locations without RFID coverage, the vehicle position is estimated from the most recent tag location using a kinematics integration algorithm till updates from the next tag. The accuracy of RFID positioning is verified empirically in two independent ways with one using radar and the other a photoelectric switch. The former is designed to verify whether the dynamic position obtained from RFID tags matches the position measured by radar that is regarded as accurate. The latter aims to verify whether the position estimated from the kinematics integration matches the position obtained from RFID tags. Both means supports the accuracy of RFID-based positioning. As a supplement to GPS which suffers from issues such as inaccuracy and loss of signal, RFID positioning is promising in facilitating connected vehicles applications. Two conceptual applications are provided here with one in vehicle operational control and the other in Level IV intersection control.

  6. Experimental Assessment of Orientation Sensing and Constructive Interference in Passive RFID Systems

    DEFF Research Database (Denmark)

    Krigslund, Rasmus

    2012-01-01

    This thesis focus on passive Radio Frequency IDentication (RFID), a tech- nology designed for automated identication of tagged objects. The tags are small passive devices powered by the wireless signal from the reader. Their simple operation thus solely allows them to reply with their unique ID...... when requested by the reader, which is a high power handheld or stationary transceiver. The RFID technology has matured over the past two decades, but still there exist ambiguities regarding the reading, or interrogation, of tags. Due to the passive nature of the tags, they are severely aected...... experience. Moreover, this thesis proposes to use passive RFID tags as orientation sensors. This is an innovative application for RFID technology in itself, but orientation sensing can also help existing RFID applications that relies on the Received Signal Strength (RSS) in the tag reply. Many Ultra High...

  7. Information Flows in Networked Engineering Design Projects

    DEFF Research Database (Denmark)

    Parraguez, Pedro; Maier, Anja

    Complex engineering design projects need to manage simultaneously multiple information flows across design activities associated with different areas of the design process. Previous research on this area has mostly focused on either analysing the “required information flows” through activity...... networks at the project level or in studying the social networks that deliver the “actual information flow”. In this paper we propose and empirically test a model and method that integrates both social and activity networks into one compact representation, allowing to compare actual and required...... information flows between design spaces, and to assess the influence that these misalignments could have on the performance of engineering design projects....

  8. RFID-Enabled Smart Government

    OpenAIRE

    Fatima Al Shamsi; Noura Al Shamsi; Al Anoud Al Kendi; Latifa Al Darmaki; Al Yazia Aldhaheri; Dr. Muhammad Khan

    2015-01-01

    Abstract Radio frequency identification is a technology that allows user to identify people. In this research work you will understand the concept of RFID and E-wallet. To know the advantages and disadvantage of Emirates ID connected with the E-wallet. In This Research we will identify the problems and risks of connecting RFID E-wallet with Emirates ID. Also recognize and recommend the possible solutions.

  9. RFID-Enabled Smart Government

    Directory of Open Access Journals (Sweden)

    Fatima Al Shamsi

    2015-08-01

    Full Text Available Abstract Radio frequency identification is a technology that allows user to identify people. In this research work you will understand the concept of RFID and E-wallet. To know the advantages and disadvantage of Emirates ID connected with the E-wallet. In This Research we will identify the problems and risks of connecting RFID E-wallet with Emirates ID. Also recognize and recommend the possible solutions.

  10. Wireless Smart Systems Beyond RFID

    OpenAIRE

    Vermesan, Ovidiu

    2008-01-01

    It is expected that in the coming 20 years the IoT will be pervasive, and ubiquitous: smart devices, embedded in smart materials, will work in synergy to improve the quality of our lives. In this context wireless smart systems will play an essential role that is far beyond the ID information that is part of RFID devices today. Wireless Smart Systems Beyond RFID

  11. Increasing Accuracy: A New Design and Algorithm for Automatically Measuring Weights, Travel Direction and Radio Frequency Identification (RFID) of Penguins.

    Science.gov (United States)

    Afanasyev, Vsevolod; Buldyrev, Sergey V; Dunn, Michael J; Robst, Jeremy; Preston, Mark; Bremner, Steve F; Briggs, Dirk R; Brown, Ruth; Adlard, Stacey; Peat, Helen J

    2015-01-01

    A fully automated weighbridge using a new algorithm and mechanics integrated with a Radio Frequency Identification System is described. It is currently in use collecting data on Macaroni penguins (Eudyptes chrysolophus) at Bird Island, South Georgia. The technology allows researchers to collect very large, highly accurate datasets of both penguin weight and direction of their travel into or out of a breeding colony, providing important contributory information to help understand penguin breeding success, reproductive output and availability of prey. Reliable discrimination between single and multiple penguin crossings is demonstrated. Passive radio frequency tags implanted into penguins allow researchers to match weight and trip direction to individual birds. Low unit and operation costs, low maintenance needs, simple operator requirements and accurate time stamping of every record are all important features of this type of weighbridge, as is its proven ability to operate 24 hours a day throughout a breeding season, regardless of temperature or weather conditions. Users are able to define required levels of accuracy by adjusting filters and raw data are automatically recorded and stored allowing for a range of processing options. This paper presents the underlying principles, design specification and system description, provides evidence of the weighbridge's accurate performance and demonstrates how its design is a significant improvement on existing systems.

  12. The improved business valuation model for RFID company based on the community mining method.

    Science.gov (United States)

    Li, Shugang; Yu, Zhaoxu

    2017-01-01

    Nowadays, the appetite for the investment and mergers and acquisitions (M&A) activity in RFID companies is growing rapidly. Although the huge number of papers have addressed the topic of business valuation models based on statistical methods or neural network methods, only a few are dedicated to constructing a general framework for business valuation that improves the performance with network graph (NG) and the corresponding community mining (CM) method. In this study, an NG based business valuation model is proposed, where real options approach (ROA) integrating CM method is designed to predict the company's net profit as well as estimate the company value. Three improvements are made in the proposed valuation model: Firstly, our model figures out the credibility of the node belonging to each community and clusters the network according to the evolutionary Bayesian method. Secondly, the improved bacterial foraging optimization algorithm (IBFOA) is adopted to calculate the optimized Bayesian posterior probability function. Finally, in IBFOA, bi-objective method is used to assess the accuracy of prediction, and these two objectives are combined into one objective function using a new Pareto boundary method. The proposed method returns lower forecasting error than 10 well-known forecasting models on 3 different time interval valuing tasks for the real-life simulation of RFID companies.

  13. Protocol and networking design issues for local access WDM networks

    OpenAIRE

    Salvador, M.R.; Heemstra de Groot, S.M.; Niemegeers, I.G.M.M.

    1999-01-01

    This report gives an overview of some of the protocol and networking design issues that have been addressed in Flamingo, a major ongoing project which investigates the use of WDM optical technology in local access networks. Quality of service delivery and wavelength assignment are focused on in this report. A brief introduction to optical networks and WDM as well as a brief description of Flamingo are also included in this report.

  14. Modelling and designing electric energy networks

    International Nuclear Information System (INIS)

    Retiere, N.

    2003-11-01

    The author gives an overview of his research works in the field of electric network modelling. After a brief overview of technological evolutions from the telegraph to the all-electric fly-by-wire aircraft, he reports and describes various works dealing with a simplified modelling of electric systems and with fractal simulation. Then, he outlines the challenges for the design of electric networks, proposes a design process, gives an overview of various design models, methods and tools, and reports an application in the design of electric networks for future jumbo jets

  15. Small Form Factor RFID Applicator, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed development of a small form factor Astrobee dedicated RFID label applicator will allow current and future free flying vehicles to place RFID labels...

  16. Protocol and networking design issues for local access WDM networks

    NARCIS (Netherlands)

    Salvador, M.R.; Heemstra de Groot, S.M.; Niemegeers, I.G.M.M.

    This report gives an overview of some of the protocol and networking design issues that have been addressed in Flamingo, a major ongoing project which investigates the use of WDM optical technology in local access networks. Quality of service delivery and wavelength assignment are focused on in this

  17. A transportation security system applying RFID and GPS

    Directory of Open Access Journals (Sweden)

    Ruijian Zhang

    2013-03-01

    Full Text Available Purpose: This paper is about developing a centralized, internet based security tool which utilizes RFID and GPS technology to identify drivers and track the load integrity. Design/methodology/approach: The system will accomplish the security testing in real-time using the internet and the U.S. Customs’ database (ACE. A central database and the interfaces and communication between the database and ACE will be established. After the vehicle is loaded, all openings of the tanker are sealed with disposable RFID tag seals. Findings/value: An RFID reader and GPS tracker wirelessly connected with the databases will serve as testing grounds for the implementation of security measures that can help prevent future terrorist attacks and help in ensuring that the goods and products are not compromised while in transit. The system will also reduce the labor work of security check to its minimum. 

  18. RFID Presenter: A New Way to Feel a Talk

    Directory of Open Access Journals (Sweden)

    Jonathan Ruiz-de-Garibay

    2014-01-01

    Full Text Available RFID is a key which enables technology for the Internet of Things paradigm, allowing the virtualization of the physical objects into the Internet. There are uncountable applications whereby these connected objects can be a breakthrough for new business models, and this work shows a good example of that. We present the RFID Presenter as the evolution of a classical consumer electronic product to a novel connected Internet product with the addition of the RFID technology. It supposes a new way to manage the conference talks in a personalization way, improving the end-user interaction and providing services that were impossible before. The design, implementation, and validation of a real gadget are well explained in order to give a real example of how the Internet of Things can be integrated into daily objects and enhance the end-user experiences.

  19. Design principles in biological networks

    Science.gov (United States)

    Goyal, Sidhartha

    Much of biology emerges from networks of interactions. Even in a single bacterium such as Escherichia coli, there are hundreds of coexisting gene and protein networks. Although biological networks are the outcome of evolution, various physical and biological constraints limit their functional capacity. The focus of this thesis is to understand how functional constraints such as optimal growth in mircoorganisms and information flow in signaling pathways shape the metabolic network of bacterium E. coli and the quorum sensing network of marine bacterium Vibrio harveyi, respectively. Metabolic networks convert basic elemental sources into complex building-blocks eventually leading to cell's growth. Therefore, typically, metabolic pathways are often coupled both by the use of a common substrate and by stoichiometric utilization of their products for cell growth. We showed that such a coupled network with product-feedback inhibition may exhibit limit-cycle oscillations which arise via a Hopf bifurcation. Furthermore, we analyzed several representative metabolic modules and find that, in all cases, simple product-feedback inhibition allows nearly optimal growth, in agreement with the predicted growth-rate by the flux-balance analysis (FBA). Bacteria have fascinating and diverse social lives. They display coordinated group behaviors regulated by quorum sensing (QS) systems. The QS circuit of V. harveyi integrates and funnels different ecological information through a common phosphorelay cascade to a set of small regulatory RNAs (sRNAs) that enables collective behavior. We analyzed the signaling properties and information flow in the QS circuit, which provides a model for information flow in signaling networks more generally. A comparative study of post-transcriptional and conventional transcriptional regulation suggest a niche for sRNAs in allowing cells to transition quickly yet reliably between distinct states. Furthermore, we develop a new framework for analyzing signal

  20. RFID and medication care.

    Science.gov (United States)

    Lahtela, Antti; Saranto, Kaija

    2009-01-01

    Dynamic healthcare needs new IT innovations and applications to be able to treat the rapidly growing number of patients effectively and safely. The information technology has to support healthcare in developing practices and nursing patients without confronting any complications or errors. One critical and important part of healthcare is medication care, which is very vulnerable for different kind of errors, even on fatal errors. Thus, medication care needs new methods for avoiding errors in different situations during medication administration. This poster represents an RFID-based automated identification system for medication care in a hospital environment. This work is a part of the research project MaISSI (Managing IT Services and Service Implementation) at the University of Kuopio, Department of Computer Science, Finland.

  1. Measuring the drinking behaviour of individual pigs housed in group using radio frequency identification (RFID).

    Science.gov (United States)

    Maselyne, J; Adriaens, I; Huybrechts, T; De Ketelaere, B; Millet, S; Vangeyte, J; Van Nuffel, A; Saeys, W

    2016-09-01

    Changes in the drinking behaviour of pigs may indicate health, welfare or productivity problems. Automated monitoring and analysis of drinking behaviour could allow problems to be detected, thus improving farm productivity. A high frequency radio frequency identification (HF RFID) system was designed to register the drinking behaviour of individual pigs. HF RFID antennas were placed around four nipple drinkers and connected to a reader via a multiplexer. A total of 55 growing-finishing pigs were fitted with radio frequency identification (RFID) ear tags, one in each ear. RFID-based drinking visits were created from the RFID registrations using a bout criterion and a minimum and maximum duration criterion. The HF RFID system was successfully validated by comparing RFID-based visits with visual observations and flow meter measurements based on visit overlap. Sensitivity was at least 92%, specificity 93%, precision 90% and accuracy 93%. RFID-based drinking duration had a high correlation with observed drinking duration (R 2=0.88) and water usage (R 2=0.71). The number of registrations after applying the visit criteria had an even higher correlation with the same two variables (R 2=0.90 and 0.75, respectively). There was also a correlation between number of RFID visits and number of observed visits (R 2=0.84). The system provides good quality information about the drinking behaviour of individual pigs. As health or other problems affect the pigs' drinking behaviour, analysis of the RFID data could allow problems to be detected and signalled to the farmer. This information can help to improve the productivity and economics of the farm as well as the health and welfare of the pigs.

  2. Photonic network-on-chip design

    CERN Document Server

    Bergman, Keren; Biberman, Aleksandr; Chan, Johnnie; Hendry, Gilbert

    2013-01-01

    This book provides a comprehensive synthesis of the theory and practice of photonic devices for networks-on-chip. It outlines the issues in designing photonic network-on-chip architectures for future many-core high performance chip multiprocessors. The discussion is built from the bottom up: starting with the design and implementation of key photonic devices and building blocks, reviewing networking and network-on-chip theory and existing research, and finishing with describing various architectures, their characteristics, and the impact they will have on a computing system. After acquainting

  3. Designing Broadband Access Networks with Triple Redundancy

    DEFF Research Database (Denmark)

    Pedersen, Jens Myrup; Riaz, Muhammad Tahir; Knudsen, Thomas Phillip

    2005-01-01

    An architecture is proposed for designing broadband access networks, which offer triple redundancy to the end users, resulting in networks providing connectivity even in case of any two independent node or line failures. Two physically independent connections are offered by fiber, and the last...... provided by some wireless solution. Based on experience with planning Fiber To The Home, the architecture is designed to meet a number of demands, making it practicable and useful in realworld network planning. The proposed wired topology is planar, and suitable for being fitted onto the road network...

  4. Efficient DFSA Algorithm in RFID Systems for the Internet of Things

    Directory of Open Access Journals (Sweden)

    Hsing-Wen Wang

    2015-01-01

    Full Text Available Radio Frequency IDentification (RFID used in business applications and international business management fields can create and sustain the competitive advantage, which is also one of the wireless telecommunication techniques for recognizing objects to realize Internet of Things (IoT technologies. In construction of IoT network, the RFID technologies play the role of the front-end data collection via tag identification, as the basis of IoT. Hence, the adoption of RFID technologies is spurring innovation and the development of the IoT. However, in RFID system, one of the most important challenges is the collision resolution between the tags when these tags transmit their data to the reader simultaneously. Hence, in this paper I develop an efficient scheme to estimate the number of unidentified tags for Dynamic Framed Slotted Aloha (DFSA based RFID system, with the view of increasing system performance. In addition to theoretical analysis, simulations are conducted to evaluate the performance of proposed scheme. The simulation results reveal the proposed scheme works very well in providing a substantial performance improvement in RFID system. The proposed algorithm promotes business effectiveness and efficiency while applying the RFID technologies to IoT.

  5. Design of an indoor self-positioning system for the visually impaired--simulation with RFID and Bluetooth in a visible light communication system.

    Science.gov (United States)

    Liu, Xiaohan; Makino, Hideo; Kobayashi, Suguru; Maeda, Yoshinobu

    2007-01-01

    After a public experiment of the indoor guidance system using FLC (fluorescent light communication), we found that FLC provides a promising medium for the installation of a guidance system for the visually impaired. However, precise self-positioning was not satisfactorily achieved. In this article, we propose a new self-positioning method, one that uses a combination of RFID (Radio-frequency identification), Bluetooth and FLC. We analyzed the situation and developed a model that combined the three communication modes. Then we performed a series of experiments and get some results in the first step.

  6. Design of the HYREX raingauge network

    Directory of Open Access Journals (Sweden)

    R. J. Moore

    2000-01-01

    Full Text Available Dense raingauge experiments in the past have experienced difficulties in the automated recording of rainfall amount and timing which with the benefit of modern instrument technology are now less problematic. The HYdrological Radar EXperiment, HYREX, provided a timely opportunity to design and implement a dense raingauge network in support of rainfall measurement and modelling research studies concerned with the use of weather radar in hydrology. The principles and random function theory underlying the design of this raingauge network over the Brue catchment in south-west England are detailed in this paper. Keywords: raingauge, design, network, rainfall, flood, spatial correlation

  7. Network design management and technical perspectives

    CERN Document Server

    Piliouras, Teresa C

    2004-01-01

    MAKING THE BUSINESS CASE FOR THE NETWORKManagement Overview of Network DesignDefine the Business ObjectivesDetermine Potential Risks, Dependencies, Costs andBenefitsIdentify Project RequirementsDevelop Project Implementation ApproachStrategic Positioning Using NetworksCase StudiesCalculation of Technology's Strategic ValueDealing with Major Design ChallengesOrganizational Concerns and RecommendationsTechnology Concerns and RecommendationsSimilarities and Differences between Voice and DataNetwork Design and PlanningMajor Trends and Technology EnablersSocietal TrendsService Provider TrendsMajor

  8. Using turbidity for designing water networks.

    Science.gov (United States)

    Castaño, J A; Higuita, J C

    2016-05-01

    Some methods to design water networks with minimum fresh water consumption are based on the selection of a key contaminant. In most of these "single contaminant methods", a maximum allowable concentration of contaminants must be established in water demands and water sources. Turbidity is not a contaminant concentration but is a property that represents the "sum" of other contaminants, with the advantage that it can be cheaper and easily measured than biological oxygen demand, chemical oxygen demand, suspended solids, dissolved solids, among others. The objective of this paper is to demonstrate that turbidity can be used directly in the design of water networks just like any other contaminant concentration. A mathematical demonstration is presented and in order to validate the mathematical results, the design of a water network for a guava fudge production process is performed. The material recovery pinch diagram and nearest neighbors algorithm were used for the design of the water network. Nevertheless, this water network could be designed using other single contaminant methodologies. The maximum error between the expected and the real turbidity values in the water network was 3.3%. These results corroborate the usefulness of turbidity in the design of water networks. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Green corridors and network design

    DEFF Research Database (Denmark)

    Panagakos, George

    2016-01-01

    The purpose of this chapter is to investigate the relation between the Trans-European Transport Network (TEN-T) and the green corridor concept. First, the need is established for a corridor governance structure that enables the close cooperation among the numerous stakeholders from both the public...

  10. Implementation of RFID Technology in University of Pune Library

    Science.gov (United States)

    Bansode, Sadanand Y.; Desale, Sanjay K.

    2009-01-01

    Purpose: The purpose of this paper is to describe the implementation of a radio frequency identification (RFID) system in Pune University Library. Design/methodology/approach: The paper provides a brief overview of background of the project, barriers faced and changes that have been experienced after the implementation of the technology. Findings:…

  11. RFID Technology Implementation in Two Libraries in New Delhi

    Science.gov (United States)

    Madhusudhan, Margam

    2010-01-01

    Purpose: The purpose of this paper is to examine the use and implementation of RFID technology at the Indian Law Institute Library and National Social Science Documentation Centre Library, New Delhi. Design/methodology/approach: A survey was conducted at the two libraries, using a structured questionnaire comprising 20 questions. Findings: It was…

  12. The Application of RFID Technologies in Construction

    Institute of Scientific and Technical Information of China (English)

    LIAN Meng

    2009-01-01

    RFID technologies have advanced greatly and deployed successfully in many industry sectors in recent years. Construction industry could benefit from the applications of RFID technologies but as yet has not found sufficient application areas. This project gives a comprehensive awareness of the RFID technologies, which focus on the investigation on the UK construction industry. The current status of RFID in construction and its potentials are specified in the analysis of questionnaires and case studies. Finally, basing on the investigations, some further tasks in developing RFID technologies are carried, including some recommendations, for the construction industry.

  13. Development of the RFID System for nuclear materials management

    International Nuclear Information System (INIS)

    Chen, K.; Tsai, H.; Liu, Y.Y.

    2008-01-01

    Radio frequency identification (RFID) is one of today's most rapidly growing technologies in the automatic data collection industry. Although commercial applications are already widespread, the use of this technology for managing nuclear materials is only in its infancy. Employing an RFID system has the potential to offer an immense payback: enhanced safety and security, reduced need for manned surveillance, real-time access to status and event history data, and overall cost-effectiveness. The Packaging Certification Program (PCP) in the U.S. Department of Energy's (DOE's) Office of Environmental Management (EM), Office of Packaging and Transportation (EM-63), is developing an RFID system for nuclear materials management. The system consists of battery-powered RFID tags with onboard sensors and memories, a reader network, application software, a database server and web pages. The tags monitor and record critical parameters, including the status of seals, movement of objects, and environmental conditions of the nuclear material packages in real time. They also provide instant warnings or alarms when preset thresholds for the sensors are exceeded. The information collected by the readers is transmitted to a dedicated central database server that can be accessed by authorized users across the DOE complex via a secured network. The onboard memory of the tags allows the materials manifest and event history data to reside with the packages throughout their life cycles in storage, transportation, and disposal. Data security is currently based on Advanced Encryption Standard-256. The software provides easy-to-use graphical interfaces that allow access to all vital information once the security and privilege requirements are met. An innovative scheme has been developed for managing batteries in service for more than 10 years without needing to be changed. A miniature onboard dosimeter is being developed for applications that require radiation surveillance. A field

  14. A framework for performance and data quality assessment of Radio Frequency IDentification (RFID) systems in health care settings

    NARCIS (Netherlands)

    van der Togt, Remko; Bakker, Piet J. M.; Jaspers, Monique W. M.

    2011-01-01

    Objective: RFID offers great opportunities to health care. Nevertheless, prior experiences also show that RFID systems have not been designed and tested in response to the particular needs of health care settings and might introduce new risks. The aim of this study is to present a framework that can

  15. Analysis and Design of Complex Network Environments

    Science.gov (United States)

    2012-03-01

    and J. Lowe, “The myths and facts behind cyber security risks for industrial control systems ,” in the Proceedings of the VDE Kongress, VDE Congress...questions about 1) how to model them, 2) the design of experiments necessary to discover their structure (and thus adapt system inputs to optimize the...theoretical work that clarifies fundamental limitations of complex networks with network engineering and systems biology to implement specific designs and

  16. Distribution Network Design--literature study based

    OpenAIRE

    LI, ANG

    2012-01-01

    The focus of this research is companies' outbound distribution network design in supply chain management. Within the present competitive market, it is a fundamental importance for companies to achieve high level business performance with an effective supply chain. Outbound distribution network design as an important part in supply chain management, to a large extent decides whether companies can fulfill customers' requirement or not. Therefore, such a study is important for manufacturers and ...

  17. Network inference via adaptive optimal design

    Directory of Open Access Journals (Sweden)

    Stigter Johannes D

    2012-09-01

    Full Text Available Abstract Background Current research in network reverse engineering for genetic or metabolic networks very often does not include a proper experimental and/or input design. In this paper we address this issue in more detail and suggest a method that includes an iterative design of experiments based, on the most recent data that become available. The presented approach allows a reliable reconstruction of the network and addresses an important issue, i.e., the analysis and the propagation of uncertainties as they exist in both the data and in our own knowledge. These two types of uncertainties have their immediate ramifications for the uncertainties in the parameter estimates and, hence, are taken into account from the very beginning of our experimental design. Findings The method is demonstrated for two small networks that include a genetic network for mRNA synthesis and degradation and an oscillatory network describing a molecular network underlying adenosine 3’-5’ cyclic monophosphate (cAMP as observed in populations of Dyctyostelium cells. In both cases a substantial reduction in parameter uncertainty was observed. Extension to larger scale networks is possible but needs a more rigorous parameter estimation algorithm that includes sparsity as a constraint in the optimization procedure. Conclusion We conclude that a careful experiment design very often (but not always pays off in terms of reliability in the inferred network topology. For large scale networks a better parameter estimation algorithm is required that includes sparsity as an additional constraint. These algorithms are available in the literature and can also be used in an adaptive optimal design setting as demonstrated in this paper.

  18. Heat exchanger networks design with constraints

    International Nuclear Information System (INIS)

    Amidpur, M.; Zoghi, A.; Nasiri, N.

    2000-01-01

    So far there have been two approaches to the problem of heat recovery system design where stream matching constraints exist. The first approach involves mathematical techniques for solving the combinational problem taking due recognition of the constraints. These methodologies are now efficient, still suffer from the problem of taking a significant amount of control and direction away from the designer. The second approach based upon so called pinch technology and involves the use of adaptation of standard problem table algorithm. Unfortunately, the proposed methodologies are not very easy to understand, therefore they fail to provide the insight and generally associated with these approaches. Here, a new pinch based methodology is presented. In this method, we modified the traditional numerical targeting procedure-problem table algorithm which is stream cascade table. Unconstrained groups are established by using of artificial intelligence method such that they have minimum utility consumption among different alternatives. Each group is an individual network, therefore, traditional optimization, used in pinch technology, should be employed. By transferring energy between groups heat recovery can be maximized, then each group designs individually and finally networks combine together. One of the advantages of using this method is simple targeting and easy networks-design. Besides the approach has the potential using of new network design methods such as dual temperature approach, flexible pinch design, pseudo pinch design. It is hoped that this methodology provides insight easy network design

  19. A secure RFID mutual authentication protocol for healthcare environments using elliptic curve cryptography.

    Science.gov (United States)

    Jin, Chunhua; Xu, Chunxiang; Zhang, Xiaojun; Zhao, Jining

    2015-03-01

    Radio Frequency Identification(RFID) is an automatic identification technology, which can be widely used in healthcare environments to locate and track staff, equipment and patients. However, potential security and privacy problems in RFID system remain a challenge. In this paper, we design a mutual authentication protocol for RFID based on elliptic curve cryptography(ECC). We use pre-computing method within tag's communication, so that our protocol can get better efficiency. In terms of security, our protocol can achieve confidentiality, unforgeability, mutual authentication, tag's anonymity, availability and forward security. Our protocol also can overcome the weakness in the existing protocols. Therefore, our protocol is suitable for healthcare environments.

  20. Intellectual Production Supervision Perform based on RFID Smart Electricity Meter

    Science.gov (United States)

    Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

    2018-03-01

    This topic develops the RFID intelligent electricity meter production supervision project management system. The system is designed for energy meter production supervision in the management of the project schedule, quality and cost information management requirements in RFID intelligent power, and provide quantitative information more comprehensive, timely and accurate for supervision engineer and project manager management decisions, and to provide technical information for the product manufacturing stage file. From the angle of scheme analysis, design, implementation and test, the system development of production supervision project management system for RFID smart meter project is discussed. Focus on the development of the system, combined with the main business application and management mode at this stage, focuses on the energy meter to monitor progress information, quality information and cost based information on RFID intelligent power management function. The paper introduces the design scheme of the system, the overall client / server architecture, client oriented graphical user interface universal, complete the supervision of project management and interactive transaction information display, the server system of realizing the main program. The system is programmed with C# language and.NET operating environment, and the client and server platforms use Windows operating system, and the database server software uses Oracle. The overall platform supports mainstream information and standards and has good scalability.

  1. Clone tag detection in distributed RFID systems

    Science.gov (United States)

    Kamaludin, Hazalila; Mahdin, Hairulnizam

    2018-01-01

    Although Radio Frequency Identification (RFID) is poised to displace barcodes, security vulnerabilities pose serious challenges for global adoption of the RFID technology. Specifically, RFID tags are prone to basic cloning and counterfeiting security attacks. A successful cloning of the RFID tags in many commercial applications can lead to many serious problems such as financial losses, brand damage, safety and health of the public. With many industries such as pharmaceutical and businesses deploying RFID technology with a variety of products, it is important to tackle RFID tag cloning problem and improve the resistance of the RFID systems. To this end, we propose an approach for detecting cloned RFID tags in RFID systems with high detection accuracy and minimal overhead thus overcoming practical challenges in existing approaches. The proposed approach is based on consistency of dual hash collisions and modified count-min sketch vector. We evaluated the proposed approach through extensive experiments and compared it with existing baseline approaches in terms of execution time and detection accuracy under varying RFID tag cloning ratio. The results of the experiments show that the proposed approach outperforms the baseline approaches in cloned RFID tag detection accuracy. PMID:29565982

  2. Clone tag detection in distributed RFID systems.

    Science.gov (United States)

    Kamaludin, Hazalila; Mahdin, Hairulnizam; Abawajy, Jemal H

    2018-01-01

    Although Radio Frequency Identification (RFID) is poised to displace barcodes, security vulnerabilities pose serious challenges for global adoption of the RFID technology. Specifically, RFID tags are prone to basic cloning and counterfeiting security attacks. A successful cloning of the RFID tags in many commercial applications can lead to many serious problems such as financial losses, brand damage, safety and health of the public. With many industries such as pharmaceutical and businesses deploying RFID technology with a variety of products, it is important to tackle RFID tag cloning problem and improve the resistance of the RFID systems. To this end, we propose an approach for detecting cloned RFID tags in RFID systems with high detection accuracy and minimal overhead thus overcoming practical challenges in existing approaches. The proposed approach is based on consistency of dual hash collisions and modified count-min sketch vector. We evaluated the proposed approach through extensive experiments and compared it with existing baseline approaches in terms of execution time and detection accuracy under varying RFID tag cloning ratio. The results of the experiments show that the proposed approach outperforms the baseline approaches in cloned RFID tag detection accuracy.

  3. Characterization of polymer silver pastes for screen printed flexible RFID antennas

    Science.gov (United States)

    Janeczek, Kamil; Jakubowska, Małgorzata; Futera, Konrad; MłoŻniak, Anna; Kozioł, GraŻyna; Araźna, Aneta

    Radio Frequency Identification (RFID) systems have become more and more popular in the last few years because of their wide application fields, such as supply chain management and logistics. To continue their development further investigations of new conductive materials for fabrication of RFID transponders' antennas are necessary to be carried out. These materials should provide high flexibility and good radiation performance of printed antennas. In this paper, two polymer silver pastes based on silver flakes were characterized with regard to manufacturing of flexible RFID antennas with screen printing technique. Foil and paper were used as a substrate materials. Surface profile of the printed antennas was measured using an optical profilometer and their resistance was measured with a four-point-probe method. Antenna flexibility was evaluated in cyclic bending tests and its performance with reflection coefficient measurements with the use of differential probe connected to a vector network analyzer. In addition, a maximum read distance of a fabricated RFID transponder was measured.

  4. Collaborative Trust Networks in Engineering Design Adaptation

    DEFF Research Database (Denmark)

    Atkinson, Simon Reay; Maier, Anja; Caldwell, Nicholas

    2011-01-01

    ); applying the Change Prediction Method (CPM) tool. It posits the idea of the ‘Networks-in-Being’ with varying individual and collective characteristics. [Social] networks are considered to facilitate information exchange between actors. At the same time, networks failing to provide trusted-information can...... hinder effective communication and collaboration. Different combinations of trust may therefore improve or impair the likelihood of information flow, transfer and subsequent action (cause and effect). This paper investigates how analysing different types of network-structures-in-being can support......Within organisations, decision makers have to rely on collaboration with other actors from different disciplines working within highly dynamic and distributed associated networks of varying size and scales. This paper develops control and influence networks within Design Structure Matrices (DSM...

  5. A split-path schema-based RFID data storage model in supply chain management.

    Science.gov (United States)

    Fan, Hua; Wu, Quanyuan; Lin, Yisong; Zhang, Jianfeng

    2013-05-03

    In modern supply chain management systems, Radio Frequency IDentification (RFID) technology has become an indispensable sensor technology and massive RFID data sets are expected to become commonplace. More and more space and time are needed to store and process such huge amounts of RFID data, and there is an increasing realization that the existing approaches cannot satisfy the requirements of RFID data management. In this paper, we present a split-path schema-based RFID data storage model. With a data separation mechanism, the massive RFID data produced in supply chain management systems can be stored and processed more efficiently. Then a tree structure-based path splitting approach is proposed to intelligently and automatically split the movement paths of products . Furthermore, based on the proposed new storage model, we design the relational schema to store the path information and time information of tags, and some typical query templates and SQL statements are defined. Finally, we conduct various experiments to measure the effect and performance of our model and demonstrate that it performs significantly better than the baseline approach in both the data expression and path-oriented RFID data query performance.

  6. A Split-Path Schema-Based RFID Data Storage Model in Supply Chain Management

    Directory of Open Access Journals (Sweden)

    Jianfeng Zhang

    2013-05-01

    Full Text Available In modern supply chain management systems, Radio Frequency IDentification (RFID technology has become an indispensable sensor technology and massive RFID data sets are expected to become commonplace. More and more space and time are needed to store and process such huge amounts of RFID data, and there is an increasing realization that the existing approaches cannot satisfy the requirements of RFID data management. In this paper, we present a split-path schema-based RFID data storage model. With a data separation mechanism, the massive RFID data produced in supply chain management systems can be stored and processed more efficiently. Then a tree structure-based path splitting approach is proposed to intelligently and automatically split the movement paths of products . Furthermore, based on the proposed new storage model, we design the relational schema to store the path information and time information of tags, and some typical query templates and SQL statements are defined. Finally, we conduct various experiments to measure the effect and performance of our model and demonstrate that it performs significantly better than the baseline approach in both the data expression and path-oriented RFID data query performance.

  7. Development of corrosion condition sensing and monitoring system using radio-frequency identification devices (RFID)

    Energy Technology Data Exchange (ETDEWEB)

    Gu, G.P.; Zheng, W. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Laboratory

    2008-05-15

    This study discussed the development of a corrosion sensing and monitoring system for military land vehicles. Radio-frequency identification device (RFID) technology uses radio waves to identify individual masses with RFID tags attached. A corrosion-sensing element was integrated with the RFID technology, which incorporated a galvanic corrosion cell designed to trigger RFID tags. Corrosion severity was then related to the galvanic current. The tag recorded the sensor reading and transmitted the data to an RFID reader. The tags consisted of a microchip and an antenna. A software development kit has also been developed to interface RFID data with existing applications. While it is currently not possible to modify the RFID tags to prevent security risks, further research is being conducted to assemble a data-logger system with corrosion probes to measure humidity, electrical resistance, and linear polarization resistance. Studies will also be conducted to assemble an active tag reader system and investigate potential modifications. 4 refs., 1 fig., 1 appendix.

  8. Designing value-creating supply chain networks

    CERN Document Server

    Martel, Alain

    2016-01-01

    Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

  9. Ethical Issues in Network System Design

    Directory of Open Access Journals (Sweden)

    Duncan Langford

    1997-05-01

    Full Text Available Today, most desktop computers and PCs are networked that is, they have the ability to link to other machines, usually to access data and other information held remotely. Such machines may sometimes be connected directly to each other, as part of an office or company computer system. More frequently, however, connected machines are at a considerable distance from each other, typically connected through links to global systems such as the Internet, or World Wide Web (WWW. The networked machine itself may be anything from a powerful company computer with direct Internet connections, to a small hobbyist machine, accessing a bulletin board through telephone and modem. It is important to remember that, whatever the type or the location of networked machines, their access to the network, and the network itself, was planned and constructed following deliberate design considerations. In this paper I discuss some ways in which the technical design of computer systems might appropriately be influenced by ethical issues, and examine pressures on computer scientists and others to technically control network related actions perceived as 'unethical'. After examination of the current situation, I draw together the issues, and conclude by suggesting some ethically based recommendations for the future design of networked systems.

  10. Network Design with Node Degree Balance Constraints

    DEFF Research Database (Denmark)

    Pedersen, Michael Berliner; Crainic, Teodor Gabriel

    This presentation discusses an extension to the network design model where there in addition to the flow conservation constraints also are constraints that require design conservation. This means that the number of arcs entering and leaving a node must be the same. As will be shown the model has ...

  11. Application of wireless sensor network technology in logistics information system

    Science.gov (United States)

    Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

    2017-04-01

    This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

  12. A New Ultra-lightweight Authentication Protocol for Low Cost RFID Tags

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2013-05-01

    Full Text Available The Radio Frequency Identification (RFID system has been widely used in almost every aspects of the society. At present, the problem of security and privacy become a key factor of severely blocking the widespread of its usage. However, due to restraints on RFID tag’s manufacturing cost, the traditional methods of encryption are not good candidate to defend the security of wireless communication channel between reader and tag. Designing lightweight or ultra-lightweight RFID authentication protocol has become a hot research topic recently. This paper proposes a new ultra-lightweight RFID authentication protocol with high robustness and execution efficiency. The proposed protocol requires only simple bit-wise operations, it has the characteristics of low storage requirement and communication cost. At the same time, through elaborate mechanism design, avoid the vulnerability of the existing ultra-lightweight authentication protocols.

  13. RFID-based Electronic Identity Security Cloud Platform in Cyberspace

    OpenAIRE

    Bing Chen; Chengxiang Tan; Bo Jin; Xiang Zou; Yuebo Dai

    2012-01-01

    With the moving development of networks, especially Internet of Things, electronic identity administration in cyberspace is becoming more and more important. And personal identity management in cyberspace associated with individuals in reality has been one significant and urgent task for the further development of information construction in China. So this paper presents a RFID-based electronic identity security cloud platform in cyberspace to implement an efficient security management of cyb...

  14. Design Guidelines for New Generation Network Architecture

    Science.gov (United States)

    Harai, Hiroaki; Fujikawa, Kenji; Kafle, Ved P.; Miyazawa, Takaya; Murata, Masayuki; Ohnishi, Masaaki; Ohta, Masataka; Umezawa, Takeshi

    Limitations are found in the recent Internet because a lot of functions and protocols are patched to the original suite of layered protocols without considering global optimization. This reveals that end-to-end argument in the original Internet was neither sufficient for the current societal network and nor for a sustainable network of the future. In this position paper, we present design guidelines for a future network, which we call the New Generation Network, which provides the inclusion of diverse human requirements, reliable connection between the real-world and virtual network space, and promotion of social potentiality for human emergence. The guidelines consist of the crystal synthesis, the reality connection, and the sustainable & evolutional guidelines.

  15. On cost-effective communication network designing

    Science.gov (United States)

    Zhang, Guo-Qiang

    2010-02-01

    How to efficiently design a communication network is a paramount task for network designing and engineering. It is, however, not a single objective optimization process as perceived by most previous researches, i.e., to maximize its transmission capacity, but a multi-objective optimization process, with lowering its cost to be another important objective. These two objectives are often contradictive in that optimizing one objective may deteriorate the other. After a deep investigation of the impact that network topology, node capability scheme and routing algorithm as well as their interplays have on the two objectives, this letter presents a systematic approach to achieve a cost-effective design by carefully choosing the three designing aspects. Only when routing algorithm and node capability scheme are elegantly chosen can BA-like scale-free networks have the potential of achieving good tradeoff between the two objectives. Random networks, on the other hand, have the built-in character for a cost-effective design, especially when other aspects cannot be determined beforehand.

  16. Network design for cylinder gas distribution

    Directory of Open Access Journals (Sweden)

    Tejinder Pal Singh

    2015-01-01

    Full Text Available Purpose: Network design of the supply chain is an important and strategic aspect of logistics management. In this paper, we address the network design problem specific to packaged gases (cylinder supply chain. We propose an integrated framework that allows for the determination of the optimal facility locations, the filling plant production capacities, the inventory at plants and hubs, and the number of packages to be routed in primary and secondary transportation. Design/methodology/approach: We formulate the problem as a mixed integer program and then develop a decomposition approach to solve it. We illustrate the proposed framework with numerical examples from real-life packaged gases supply chain. The results show that the decomposition approach is effective in solving a broad range of problem sizes. Findings: The main finding of this paper is that decomposing the network design problem into two sub-problems is very effective to tackle the real-life large scale network design problems occurring in cylinder gas distribution by optimizing strategic and tactical decisions and approximating the operational decisions. We also benchmark the results from the decomposition approach by solving the complete packaged gases network design model for smaller test cases. Originality/value: The main contribution of our work is that it integrates supply chain network design decisions without fixing the fillings plant locations with inventory and resource allocation decisions required at the plants. We also consider the transportation costs for the entire supply chain including the transhipment costs among different facilities by deciding the replenishment frequency.

  17. Autonomic computing enabled cooperative networked design

    CERN Document Server

    Wodczak, Michal

    2014-01-01

    This book introduces the concept of autonomic computing driven cooperative networked system design from an architectural perspective. As such it leverages and capitalises on the relevant advancements in both the realms of autonomic computing and networking by welding them closely together. In particular, a multi-faceted Autonomic Cooperative System Architectural Model is defined which incorporates the notion of Autonomic Cooperative Behaviour being orchestrated by the Autonomic Cooperative Networking Protocol of a cross-layer nature. The overall proposed solution not only advocates for the inc

  18. Integrated management platform of nuclear fuel storage and transportation based on RFID

    International Nuclear Information System (INIS)

    Song Yafeng; Ma Yanqin; Chen Liyu; Jiang Yong; Wu Jianlei; Yang Haibo; Zhang Haiyan

    2012-01-01

    This paper describes integrated system model to improve work efficiency and optimize control measures of nuclear fuel storage and transportation, RFID and information integration technology is introduced, traditional management processes are innovated in data acquisition and monitoring fields as well, system solutions and design model are given by emphasizing on the following key technologies: cascade protection of information system, security protocol of RFID information, algorithm of collision. (authors)

  19. Classifying RFID attacks and defenses

    NARCIS (Netherlands)

    Mitrokotsa, A.; Rieback, M.R.; Tanenbaum, A.S.

    2009-01-01

    RFID (Radio Frequency Identification) systems are one of the most pervasive computing technologies with technical potential and profitable opportunities in a diverse area of applications. Among their advantages is included their low cost and their broad applicability. However, they also present a

  20. Students Attendance Management System Based On RFID And Fingerprint Reader

    Directory of Open Access Journals (Sweden)

    Moth Moth Myint Thein

    2015-07-01

    Full Text Available Abstract Today students class attendance is become more important part for any organizationsinstitutions. The conventional method of taking attendance by calling names or signing on paper is very time consuming and insecure hence inefficient. This paper presents the manual students attendance management into computerized system for convenience or data reliability. So the system is developed by the integration of ubiquitous computing systems into classroom for managing the students attendance using RFID and fingerprint reader. The system is designed to implement an attendance management system based on RFID and fingerprint reader which students need to use their student identification card ID and their finger ID to success the attendance where only authentic student can be recorded the attendance during the class. In this system passive RFID tag and reader pairs are used to register the student ID cards individually and fingerprint reader is used for attendance. This system takes attendance electronically with the help of the RFID and finger print device and the records of the attendance are stored in a database. Students roll call percentages and their details are easily seenvia Graphical User Interface GUI. This system will have the required databases for students attendance teachers subjects and students details. This application is implemented by Microsoft Visual Studio and Microsoft SQL Server as IDE. C language is used to implement this system.

  1. Design and Management of Networked Information Systems

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    In this paper, we present a newly started research project at the Center for Tele-Information at the Technical University of Denmark. The project focuses on the design and management of networked information systems, that is computer-based IS linked by a wide area network and supporting...... research questions:1. What is the essence of the new managerial theories and models and how do they define the role of telecommunications and IT in organizations?2. How are these organizational theories and models implemented in practice?3. How is the design and implementation of information systems...... and networks actually organized and carried out?4. What are the consequences for work content, skills, working conditions, etc.? The research project consists of a theoretical analysis of contemporary management theories as well as a number of in-depth case studies of firms engaged in the design...

  2. Node design in optical packet switched networks

    DEFF Research Database (Denmark)

    Nord, Martin

    2006-01-01

    The thesis discusses motivation, realisation and performance of the Optical Packet Switching (OPS) network paradigm. The work includes proposals for designs and methods to efficiently use both the wavelength- and time domain for contention resolution in asynchronous operation. The project has also......S parameter. Finally, the thesis includes a proposal for a node design and associated MAC protocol for an OPS ring topology metropolitan area network with high throughput and fairness, also for unbalanced traffic....... proposed parallel designs to overcome scalability constraints and to support migration scenarios. Furthermore, it has proposed and demonstrated optical input processing schemes for hybrids networks to simultaneously support OPS and Optical Circuit Switching. Quality of Service (QoS) differentiation enables...

  3. Visual RFID solution optimizes maintenance process; Visuelle RFID-Label. Optimierung des Instandhaltungsprozesses

    Energy Technology Data Exchange (ETDEWEB)

    Stephan, Martin [Evonik Energy Services GmbH, Essen (Germany)

    2010-09-06

    Evonik Energy Services GmbH has combined the established technology of RFID labels without battery (passive transponders) with bistable displays (based on e-paper technology), to a passive V-RFID label (visual RFID). Thus, the information which is stored invisible on conventional RFID tags will become readable for everybody. Both, the advantages as well as the chances of this innovative technology for prospective applications become obvious in an example application. (orig.)

  4. An Authentication Protocol for Mobile IPTV Users Based on an RFID-USB Convergence Technique

    Science.gov (United States)

    Jeong, Yoon-Su; Kim, Yong-Tae

    With the growing trend towards convergence in broadcast and communications media, Internet Protocol television (IPTV) that delivers real-time multimedia content over diverse types of communications networks (e.g., broadband Internet, cable TV, and satellite TV) has become a mainstream technology. Authenticating mobile IPTV subscribers who are continuously on the move is a challenge. A complex authentication process often impairs conditional access security or service quality as increasing illegal users and delaying service. This paper proposes an RFID-USB authentication protocol, for mobile IPTV users, combined with USIM-based personalized authentication and lightweight authentication that utilizes the RFID-USB technology with an implanted agent module (called an "agent tag") which temporarily enhanced user status information. The proposed authentication protocol adopts a plug-and-play security agent module that is placed in both an RFID tag and an RFID-USB. The implanted security agents cooperate in such a way that multiple RFID tags are connected seamlessly to an RFID-USB.

  5. Integrated algorithms for RFID-based multi-sensor indoor/outdoor positioning solutions

    Science.gov (United States)

    Zhu, Mi.; Retscher, G.; Zhang, K.

    2011-12-01

    Position information is very important as people need it almost everywhere all the time. However, it is a challenging task to provide precise positions indoor/outdoor seamlessly. Outdoor positioning has been widely studied and accurate positions can usually be achieved by well developed GPS techniques but these techniques are difficult to be used indoors since GPS signal reception is limited. The alternative techniques that can be used for indoor positioning include, to name a few, Wireless Local Area Network (WLAN), bluetooth and Ultra Wideband (UWB) etc.. However, all of these have limitations. The main objectives of this paper are to investigate and develop algorithms for a low-cost and portable indoor personal positioning system using Radio Frequency Identification (RFID) and its integration with other positioning systems. An RFID system consists of three components, namely a control unit, an interrogator and a transponder that transmits data and communicates with the reader. An RFID tag can be incorporated into a product, animal or person for the purpose of identification and tracking using radio waves. In general, for RFID positioning in urban and indoor environments three different methods can be used, including cellular positioning, trilateration and location fingerprinting. In addition, the integration of RFID with other technologies is also discussed in this paper. A typical combination is to integrate RFID with relative positioning technologies such as MEMS INS to bridge the gaps between RFID tags for continuous positioning applications. Experiments are shown to demonstrate the improvements of integrating multiple sensors with RFID which can be employed successfully for personal positioning.

  6. Network Design Models for Container Shipping

    DEFF Research Database (Denmark)

    Reinhardt, Line Blander; Kallehauge, Brian; Nielsen, Anders Nørrelund

    This paper presents a study of the network design problem in container shipping. The paper combines the network design and fleet assignment problem into a mixed integer linear programming model minimizing the overall cost. The major contributions of this paper is that the time of a vessel route...... is included in the calculation of the capacity and that a inhomogeneous fleet is modeled. The model also includes the cost of transshipment which is one of the major cost for the shipping companies. The concept of pseudo simple routes is introduced to expand the set of feasible routes. The linearization...

  7. Antenna for passive RFID tags

    Science.gov (United States)

    Schiopu, Paul; Manea, Adrian; Cristea, Ionica; Grosu, Neculai; Vladescu, Marian; Craciun, Anca-Ileana; Craciun, Alexandru

    2015-02-01

    Minuscule devices, called RFID tags are attached to objects and persons and emit information which positioned readers may capture wirelessly. Many methods of identification have been used, but that of most common is to use a unique serial number for identification of person or object. RFID tags can be characterized as either active or passive [1,2]. Traditional passive tags are typically in "sleep" state until awakened by the reader's emitted field. In passive tags, the reader's field acts to charge the capacitor that powers the badge and this can be a combination of antenna and barcodes obtained with SAW( Surface Acoustic Wave) devices [1,2,3] . The antenna in an RFID tag is a conductive element that permits the tag to exchange data with the reader. The paper contribution are targeted to antenna for passive RFID tags. The electromagnetic field generated by the reader is somehow oriented by the reader antenna and power is induced in the tag only if the orientation of the tag antenna is appropriate. A tag placed orthogonal to the reader yield field will not be read. This is the reason that guided manufacturers to build circular polarized antenna capable of propagating a field that is alternatively polarized on all planes passing on the diffusion axis. Passive RFID tags are operated at the UHF frequencies of 868MHz (Europe) and 915MHz (USA) and at the microwave frequencies of 2,45 GHz and 5,8 GHz . Because the tags are small dimensions, in paper, we present the possibility to use circular polarization microstrip antenna with fractal edge [2].

  8. Decommissioning support system, using RFID and USN

    Energy Technology Data Exchange (ETDEWEB)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  9. Decommissioning support system, using RFID and USN

    International Nuclear Information System (INIS)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K.

    2012-01-01

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  10. A Forward-secure Grouping-proof Protocol for Multiple RFID Tags

    Directory of Open Access Journals (Sweden)

    Liu Ya-li

    2012-09-01

    Full Text Available Designing secure and robust grouping-proof protocols based on RFID characteristics becomes a hotspot in the research of security in Internet of Things (IOT. The proposed grouping-proof protocols recently have security and/or privacy omission and these schemes afford order-dependence by relaying message among tags through an RFID reader. In consequence, aiming at enhancing the robustness, improving scalability, reducing the computation costs on resource-constrained devices, and meanwhile combing Computational Intelligence (CI with Secure Multi-party Communication (SMC, a Forward-Secure Grouping-Proof Protocol (FSGP for multiple RFID tags based on Shamir's (, secret sharing is proposed. In comparison with the previous grouping-proof protocols, FSGP has the characteristics of forward-security and order-independence addressing the scalability issue by avoiding relaying message. Our protocol provides security enhancement, performance improvement, and meanwhile controls the computation cost, which equilibrates both security and low cost requirements for RFID tags.

  11. RFID for libraries a practical guide

    CERN Document Server

    Pandian, M Paul

    2010-01-01

    Many modern technologies give the impression that they somehow work by magic, particularly when they operate automatically and their mechanisms are invisible. A technology called RFID (Radio Frequency Identification), which is relatively new, has exactly this characteristic. Librarians everywhere are closely watching RFID technology. Advances over using bar codes on library materials, RFID tags are being touted as a way to radically redesign how library materials are handled. But it is expensive. The tags are vulnerable to wear and tear and the technology is not fully developed. It's unclear what sort of return on investment (ROI) it provides. While it is common for libraries to now have information technology expertise within their organizations, RFID may appear unfamiliar. RFID for Libraries: A practical guide examines what RFID technology is and how it works. The book reviews the development of computer technology and its effects on library operations over the last couple of decades. Further examination fe...

  12. Targeting and design of chilled water network

    International Nuclear Information System (INIS)

    Foo, Dominic C.Y.; Ng, Denny K.S.; Leong, Malwynn K.Y.; Chew, Irene M.L.; Subramaniam, Mahendran; Aziz, Ramlan; Lee, Jui-Yuan

    2014-01-01

    Highlights: • Minimum flowrate targeting for chilled water network. • Mixed series/parallel configuration of chilled water-using units. • Integrated cooling and chilled water networks. - Abstract: Chilled water is a common cooling agent used in various industrial, commercial and institutional facilities. In conventional practice, chilled water is distributed via chilled water networks (CHWNs) in parallel configuration to provide required air conditioning and/or equipment cooling in the heating, ventilating and air conditioning (HVAC) system. In this paper, process integration approach based on pinch analysis technique is used to address energy efficiency issues in the CHWN system for grassroots design problem. Graphical and algebraic targeting techniques are developed to identify the minimum chilled water flowrate needed to remove a given amount of heat load from the CHWN. Doing this leads to higher chilled water return temperature and enhanced energy efficiency of the HVAC system. A recent proposed network design technique is extended to synthesize the CHWN in a mixed series/parallel configuration. A novel concept of integrated cooling and chilled water networks (IWN) is also proposed in this work, with its targeting and design techniques presented. Hypothetical examples and an industrial case study are solved to elucidate the proposed approaches

  13. Integrated network design and scheduling problems :

    Energy Technology Data Exchange (ETDEWEB)

    Nurre, Sarah G.; Carlson, Jeffrey J.

    2014-01-01

    We consider the class of integrated network design and scheduling problems. These problems focus on selecting and scheduling operations that will change the characteristics of a network, while being speci cally concerned with the performance of the network over time. Motivating applications of INDS problems include infrastructure restoration after extreme events and building humanitarian distribution supply chains. While similar models have been proposed, no one has performed an extensive review of INDS problems from their complexity, network and scheduling characteristics, information, and solution methods. We examine INDS problems under a parallel identical machine scheduling environment where the performance of the network is evaluated by solving classic network optimization problems. We classify that all considered INDS problems as NP-Hard and propose a novel heuristic dispatching rule algorithm that selects and schedules sets of arcs based on their interactions in the network. We present computational analysis based on realistic data sets representing the infrastructures of coastal New Hanover County, North Carolina, lower Manhattan, New York, and a realistic arti cial community CLARC County. These tests demonstrate the importance of a dispatching rule to arrive at near-optimal solutions during real-time decision making activities. We extend INDS problems to incorporate release dates which represent the earliest an operation can be performed and exible release dates through the introduction of specialized machine(s) that can perform work to move the release date earlier in time. An online optimization setting is explored where the release date of a component is not known.

  14. RFID Applications: An Introductory and Exploratory Study

    OpenAIRE

    Hanifa Shah; Kamran Ahsan; Paul Kingston

    2010-01-01

    RFID is not a new technology and has passed through many decades of use in military, airline, library, security, healthcare, sports, animal farms and other areas. Industries use RFID for various applications such as personal/vehicle access control, departmental store security, equipment tracking, baggage, fast food establishments, logistics, etc. The enhancement in RFID technology has brought advantages that are related to resource optimization, increased efficiency within business processes,...

  15. Design of Robust Neural Network Classifiers

    DEFF Research Database (Denmark)

    Larsen, Jan; Andersen, Lars Nonboe; Hintz-Madsen, Mads

    1998-01-01

    This paper addresses a new framework for designing robust neural network classifiers. The network is optimized using the maximum a posteriori technique, i.e., the cost function is the sum of the log-likelihood and a regularization term (prior). In order to perform robust classification, we present...... a modified likelihood function which incorporates the potential risk of outliers in the data. This leads to the introduction of a new parameter, the outlier probability. Designing the neural classifier involves optimization of network weights as well as outlier probability and regularization parameters. We...... suggest to adapt the outlier probability and regularisation parameters by minimizing the error on a validation set, and a simple gradient descent scheme is derived. In addition, the framework allows for constructing a simple outlier detector. Experiments with artificial data demonstrate the potential...

  16. DEVELOPING A WIRELESS SENSOR NETWORD WITH RFID CAPABILITIES

    Directory of Open Access Journals (Sweden)

    Dan LICA

    2016-05-01

    Full Text Available The concept underlying the pervasive communications systems is Internet of Objects, defined as a global network of smart objects, resulting in "attachment" of communication functions, data acquisition, data processing objects we interact with daily. Internet of Objects will be based on 4th generation of Internet systems. In such systems, each intelligent networked device must offer its users a number of services, which constitute a development of the current model of Web services. Such services will result from aggregation of micro services offered by each pervasive device connected to the Internet. Aggregating these micro services requires that each node in the network has the opportunity to present / expose its capabilities (so-called "advertising" in a standard way for client applications to be integrated into complex services. Therefore there appears the need to introduce a coding scheme to identity the nodes in the network, enabling the identification of their capabilities. An alternative to implementing such a system of encoding / identifying characteristics of network nodes is active RFID technology. The aim of this chapter is to develop a method to ensure the convergence of wireless sensor networks with active RFID systems within a pervasive hybrid network based on the IEEE 802.15.4 standard, which satisfies the Internet of Objects network.

  17. Speed Optimization in Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

    In the Liner Shipping Network Design Problem (LSNDP) services sail at a given speed throughout a round trip. In reality most services operate with a speed differentiated head- and back-haul, or even individual speeds on every sailing between two ports. The speed of a service is decisive...

  18. Robust network design for multispecies conservation

    Science.gov (United States)

    Ronan Le Bras; Bistra Dilkina; Yexiang Xue; Carla P. Gomes; Kevin S. McKelvey; Michael K. Schwartz; Claire A. Montgomery

    2013-01-01

    Our work is motivated by an important network design application in computational sustainability concerning wildlife conservation. In the face of human development and climate change, it is important that conservation plans for protecting landscape connectivity exhibit certain level of robustness. While previous work has focused on conservation strategies that result...

  19. Synthesis and Design of Processing Networks

    DEFF Research Database (Denmark)

    Quaglia, Alberto; Sarup, Bent; Sin, Gürkan

    2012-01-01

    In this contribution, we propose an integrated business and engineering framework for synthesis and design of processing networks under uncertainty. In our framework, an adapted formulation of the transhipment problem is integrated with a superstructure, leading to a Stochastic Mixed Integer Non...... under market and technical uncertainty....

  20. Handbook of smart antennas for RFID systems

    CERN Document Server

    2010-01-01

    The Handbook of Smart Antennas for RFID Systems is a single comprehensive reference on the smart antenna technologies applied to RFID. This book will provide a timely reference book for researchers and students in the areas of both smart antennas and RFID technologies. It is the first book to combine two of the most important wireless technologies together in one book. The handbook will feature chapters by leading experts in both academia and industry offering an in-depth description of terminologies and concepts related to smart antennas in various RFID systems applications.

  1. Privacy Protection Research of Mobile RFID

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Radio Frequency Identification is one of the most controversial technologies at present.It is very difficult to detect who reads a tag incorporated into products owned by a person,a significant concern to privacy threats in RFID system arises from this reason.User privacy problem is prior considersion for mobile RFID service,because most mobile RFID service based on end-user service.Propose a solution for user privacy protection,which is a modification of EPC Class 1 Generation 2 protocol,and introduce a privacy protection scenario for mobile RFID service using this method.

  2. Network Design Guidance for the Global Special Operations Forces Network

    Science.gov (United States)

    2014-12-01

    an introduction to the Network Design Continuum. 170 Robert M. Hayden, “ Moral Vision and Impaired Insight: The Imagining of Other Peoples...CEO and municipal president were of an abstract nature, about moral courage and political principles, which he felt it was the task of the UN to...the actions needled to improv e or rorrect peri:lrmance, relativ e to the goals of the syste m. Determin ing how a system shoukl WJrk and how dlanges

  3. Design of fuzzy systems using neurofuzzy networks.

    Science.gov (United States)

    Figueiredo, M; Gomide, F

    1999-01-01

    This paper introduces a systematic approach for fuzzy system design based on a class of neural fuzzy networks built upon a general neuron model. The network structure is such that it encodes the knowledge learned in the form of if-then fuzzy rules and processes data following fuzzy reasoning principles. The technique provides a mechanism to obtain rules covering the whole input/output space as well as the membership functions (including their shapes) for each input variable. Such characteristics are of utmost importance in fuzzy systems design and application. In addition, after learning, it is very simple to extract fuzzy rules in the linguistic form. The network has universal approximation capability, a property very useful in, e.g., modeling and control applications. Here we focus on function approximation problems as a vehicle to illustrate its usefulness and to evaluate its performance. Comparisons with alternative approaches are also included. Both, nonnoisy and noisy data have been studied and considered in the computational experiments. The neural fuzzy network developed here and, consequently, the underlying approach, has shown to provide good results from the accuracy, complexity, and system design points of view.

  4. Satellite communications network design and analysis

    CERN Document Server

    Jo, Kenneth Y

    2011-01-01

    This authoritative book provides a thorough understanding of the fundamental concepts of satellite communications (SATCOM) network design and performance assessments. You find discussions on a wide class of SATCOM networks using satellites as core components, as well as coverage key applications in the field. This in-depth resource presents a broad range of critical topics, from geosynchronous Earth orbiting (GEO) satellites and direct broadcast satellite systems, to low Earth orbiting (LEO) satellites, radio standards and protocols.This invaluable reference explains the many specific uses of

  5. Time constrained liner shipping network design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Brouer, Berit Dangaard; Desaulniers, Guy

    2017-01-01

    We present a mathematical model and a solution method for the liner shipping network design problem. The model takes into account coordination between vessels and transit time restrictions on the cargo flow. The solution method is an improvement heuristic, where an integer program is solved...... iteratively to perform moves in a large neighborhood search. Our improvement heuristic is applicable as a real-time decision support tool for a liner shipping company. It can be used to find improvements to the network when evaluating changes in operating conditions or testing different scenarios...

  6. Design Considerations for Multi-Channel Picture Communication Networks

    OpenAIRE

    Scheibe, Paul O.

    1983-01-01

    Design of networks intended for communication of digitally-encoded pictures involves considerations different from those used in the design of text or voice communication networks. This paper provides an overview of the elements useful in the design of picture communication networks by relation and contrast with other communication networks. Particular emphasis is given to picture communication systems useful in medical applications.

  7. A secure RFID authentication protocol for healthcare environments using elliptic curve cryptosystem.

    Science.gov (United States)

    Zhao, Zhenguo

    2014-05-01

    With the fast advancement of the wireless communication technology and the widespread use of medical systems, the radio frequency identification (RFID) technology has been widely used in healthcare environments. As the first important protocol for ensuring secure communication in healthcare environment, the RFID authentication protocols derive more and more attentions. Most of RFID authentication protocols are based on hash function or symmetric cryptography. To get more security properties, elliptic curve cryptosystem (ECC) has been used in the design of RFID authentication protocol. Recently, Liao and Hsiao proposed a new RFID authentication protocol using ECC and claimed their protocol could withstand various attacks. In this paper, we will show that their protocol suffers from the key compromise problem, i.e. an adversary could get the private key stored in the tag. To enhance the security, we propose a new RFID authentication protocol using ECC. Detailed analysis shows the proposed protocol not only could overcome weaknesses in Liao and Hsiao's protocol but also has the same performance. Therefore, it is more suitable for healthcare environments.

  8. RFID in the blood supply chain--increasing productivity, quality and patient safety.

    Science.gov (United States)

    Briggs, Lynne; Davis, Rodeina; Gutierrez, Alfonso; Kopetsky, Matthew; Young, Kassandra; Veeramani, Raj

    2009-01-01

    As part of an overall design of a new, standardized RFID-enabled blood transfusion medicine supply chain, an assessment was conducted for two hospitals: the University of Iowa Hospital and Clinics (UIHC) and Mississippi Baptist Health System (MBHS). The main objectives of the study were to assess RFID technological and economic feasibility, along with possible impacts to productivity, quality and patient safety. A step-by-step process analysis focused on the factors contributing to process "pain points" (errors, inefficiency, product losses). A process re-engineering exercise produced blueprints of RFID-enabled processes to alleviate or eliminate those pain-points. In addition, an innovative model quantifying the potential reduction in adverse patient effects as a result of RFID implementation was created, allowing improvement initiatives to focus on process areas with the greatest potential impact to patient safety. The study concluded that it is feasible to implement RFID-enabled processes, with tangible improvements to productivity and safety expected. Based on a comprehensive cost/benefit model, it is estimated for a large hospital (UIHC) to recover investment from implementation within two to three years, while smaller hospitals may need longer to realize ROI. More importantly, the study estimated that RFID technology could reduce morbidity and mortality effects substantially among patients receiving transfusions.

  9. A Middleware Architecture for RFID-enabled traceability of air baggage

    Directory of Open Access Journals (Sweden)

    Bouhouche T.

    2017-01-01

    Full Text Available 1980 marked the start of a boom in radiofrequency identification (RFID technology, initially associated with a growing need for traceability. In view of the technological progress and lower costs, RFID’s area of application became much broader and, today, multiple business sectors take advantage of this technology. However, in order to achieve the maximum benefits of RFID technology, the data collected should be delivered in the best conditions to the whole applications that have need of its exploitation. For that, a dedicated middleware solution is required to ensure the collection of RFID data and their integration in information systems. The issues and key points of this integration as the description of the RFID technology will be summarized in the present paper, with a new middleware architecture. We focus mainly on components and the design of our middleware MedRFID, solution developed in our Lab, and which integrates mobility and provides extensibility, scalability, abstraction, ease of deployment and compatibility with IATA standards and EPCglobal standards. Moreover, we have developed an application (FindLuggage allowing a real time tracking of luggage in the airport, based on the proposed middleware MedRFID.

  10. Theory and application on RFID

    International Nuclear Information System (INIS)

    Cho, Dae Jin

    2005-02-01

    This book tells of definition, system, operation method and classification of RFID, prospect of market, tag such as types, making process of tag, operation way and structure of tag, store of tag data and tag price, chip less tag like leader, antenna ; EPC global such as appearance of Auto-ID center, introduction of EPC system, middle ware, ONS, EPC IS and PML, a manufacturer, standardization, frequency, application cases abroad home, problems and labeling.

  11. Theory and application on RFID

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Dae Jin

    2005-02-15

    This book tells of definition, system, operation method and classification of RFID, prospect of market, tag such as types, making process of tag, operation way and structure of tag, store of tag data and tag price, chip less tag like leader, antenna ; EPC global such as appearance of Auto-ID center, introduction of EPC system, middle ware, ONS, EPC IS and PML, a manufacturer, standardization, frequency, application cases abroad home, problems and labeling.

  12. Wireless sensor networks principles, design and applications

    CERN Document Server

    Yang, Shuang-Hua

    2014-01-01

    Wireless Sensor Networks presents the latest practical solutions to the design issues presented in wireless-sensor-network-based systems. Novel features of the text, distributed throughout, include workable solutions, demonstration systems and case studies of the design and application of wireless sensor networks (WSNs) based on the first-hand research and development experience of the author, and the chapters on real applications: building fire safety protection; smart home automation; and logistics resource management. Case studies and applications illustrate the practical perspectives of: ·         sensor node design; ·         embedded software design; ·         routing algorithms; ·         sink node positioning; ·         co-existence with other wireless systems; ·         data fusion; ·         security; ·         indoor location tracking; ·         integrating with radio-frequency identification; and ·         In...

  13. Applications of Health Management Using Android and RFID

    Directory of Open Access Journals (Sweden)

    Young-Long Chen

    2012-07-01

    Full Text Available Health management has become increasingly important in personal health care in modern life. The system we have designed provides a method to help facilitate health management through an associated smart phone with Radio Frequency Identification (RFID, which is a new type of application. This system consists of medical knowledge and health management. In the application of medical knowledge, we use the human model as well as the operation of RFID to obtain medical knowledge concerning human organs. The two main functions of the health management system are medication reminders and drug identification. The feature of medication reminders allows users to set the time for taking medication so that patients do not miss taking their medication. The feature of drug identification allows the operators to identify the drugs and can let the users know who needs to take drugs. In addition, we have designed a web page that allows users to understand their health status.

  14. NIF ICCS network design and loading analysis

    International Nuclear Information System (INIS)

    Tietbohl, G; Bryant, R

    1998-01-01

    The National Ignition Facility (NIF) is housed within a large facility about the size of two football fields. The Integrated Computer Control System (ICCS) is distributed throughout this facility and requires the integration of about 40,000 control points and over 500 video sources. This integration is provided by approximately 700 control computers distributed throughout the NIF facility and a network that provides the communication infrastructure. A main control room houses a set of seven computer consoles providing operator access and control of the various distributed front-end processors (FEPs). There are also remote workstations distributed within the facility that allow provide operator console functions while personnel are testing and troubleshooting throughout the facility. The operator workstations communicate with the FEPs which implement the localized control and monitoring functions. There are different types of FEPs for the various subsystems being controlled. This report describes the design of the NIF ICCS network and how it meets the traffic loads that will are expected and the requirements of the Sub-System Design Requirements (SSDR's). This document supersedes the earlier reports entitled Analysis of the National Ignition Facility Network, dated November 6, 1996 and The National Ignition Facility Digital Video and Control Network, dated July 9, 1996. For an overview of the ICCS, refer to the document NIF Integrated Computer Controls System Description (NIF-3738)

  15. Smart Idlers : RFID in conveyor belt monitoring

    NARCIS (Netherlands)

    Pang, Y.

    2012-01-01

    Radio Frequency Identifi cation (RFID) is a technology that offers unique identifi cation of objects and processes. It can actively or passively communicate and, in combination with sensors, it can capture more detailed physical information. RFID technology has been integrated into our daily life.

  16. Making the most of RFID in libraries

    CERN Document Server

    Palmer, Martin

    2009-01-01

    The advantage of radio frequency identification (RFID) over other technologies used in libraries is usually seen to be its ability to combine the functions of the barcode and the security tag, but with the added advantage of not needing line of sight. This book considers the benefits of installing RFID technology; and work with vendors.

  17. Optimalization of selected RFID systems Parameters

    Directory of Open Access Journals (Sweden)

    Peter Vestenicky

    2004-01-01

    Full Text Available This paper describes procedure for maximization of RFID transponder read range. This is done by optimalization of magnetics field intensity at transponder place and by optimalization of antenna and transponder coils coupling factor. Results of this paper can be used for RFID with inductive loop, i.e. system working in near electromagnetic field.

  18. Orientation Sensing Using Multiple Passive RFID Tags

    DEFF Research Database (Denmark)

    Krigslund, Rasmus; Popovski, Petar; Pedersen, Gert Frølund

    2012-01-01

    Knowing the inclination of an object can be valuable information in a supply chain application, e.g. when handling orientation sensitive objects. In this work we present a method for sensing the inclination using Radio Frequency IDentification (RFID) technology. The method requires standard RFID...

  19. RFID in Retail: New approaches, new viewpoints

    NARCIS (Netherlands)

    Sander de Ridder; Jan Kroon; drs. Frans van den Reep; Christian Vrijlandt

    2008-01-01

    RFID technology is a promising technology currently finding its way into the field of customer interaction strategy, supply chain accuracy and inventory management. Primarily, RFID tags are seen as substitutes of traditional barcodes, yet they can add a lot of value and functionality. Where barcodes

  20. RFID Technologies : emerging issues and challenges

    NARCIS (Netherlands)

    Lieshout, M.J. van; Kool, L.

    2007-01-01

    In this paper we will present the results of a technology and policy assessment we have performed on emerging issues and policy challenges of RFID technologies. RFID is a basic component of the future internet of things. A balanced view on opportunities and threats, on drivers and barriers is needed

  1. Modeling and Analysis of Surgery Patient Identification Using RFID

    OpenAIRE

    Byungho Jeong; Chen-Yang Cheng; Vittal Prabhu

    2009-01-01

    This article proposes a workflow and reliability model for surgery patient identification using RFID (Radio Frequency Identification). Certain types of mistakes may be prevented by automatically identifying the patient before surgery. The proposed workflow is designed to ensure that both the correct site and patient are engaged in the surgical process. The reliability model can be used to assess improvements in patients’ safety during this process. A proof-of-concept system is developed to ...

  2. System Design for Nano-Network Communications

    Science.gov (United States)

    ShahMohammadian, Hoda

    The potential applications of nanotechnology in a wide range of areas necessities nano-networking research. Nano-networking is a new type of networking which has emerged by applying nanotechnology to communication theory. Therefore, this dissertation presents a framework for physical layer communications in a nano-network and addresses some of the pressing unsolved challenges in designing a molecular communication system. The contribution of this dissertation is proposing well-justified models for signal propagation, noise sources, optimum receiver design and synchronization in molecular communication channels. The design of any communication system is primarily based on the signal propagation channel and noise models. Using the Brownian motion and advection molecular statistics, separate signal propagation and noise models are presented for diffusion-based and flow-based molecular communication channels. It is shown that the corrupting noise of molecular channels is uncorrelated and non-stationary with a signal dependent magnitude. The next key component of any communication system is the reception and detection process. This dissertation provides a detailed analysis of the effect of the ligand-receptor binding mechanism on the received signal, and develops the first optimal receiver design for molecular communications. The bit error rate performance of the proposed receiver is evaluated and the impact of medium motion on the receiver performance is investigated. Another important feature of any communication system is synchronization. In this dissertation, the first blind synchronization algorithm is presented for the molecular communication channels. The proposed algorithm uses a non-decision directed maximum likelihood criterion for estimating the channel delay. The Cramer-Rao lower bound is also derived and the performance of the proposed synchronization algorithm is evaluated by investigating its mean square error.

  3. Temporal and Location Based RFID Event Data Management and Processing

    Science.gov (United States)

    Wang, Fusheng; Liu, Peiya

    Advance of sensor and RFID technology provides significant new power for humans to sense, understand and manage the world. RFID provides fast data collection with precise identification of objects with unique IDs without line of sight, thus it can be used for identifying, locating, tracking and monitoring physical objects. Despite these benefits, RFID poses many challenges for data processing and management. RFID data are temporal and history oriented, multi-dimensional, and carrying implicit semantics. Moreover, RFID applications are heterogeneous. RFID data management or data warehouse systems need to support generic and expressive data modeling for tracking and monitoring physical objects, and provide automated data interpretation and processing. We develop a powerful temporal and location oriented data model for modeling and queryingRFID data, and a declarative event and rule based framework for automated complex RFID event processing. The approach is general and can be easily adapted for different RFID-enabled applications, thus significantly reduces the cost of RFID data integration.

  4. Implementasi Sistem Perparkiran Otomatis dengan Menentukan Posisi Parkir Berbasis RFId

    Directory of Open Access Journals (Sweden)

    FREEON ALKAPON IMBIRI

    2016-02-01

    vehicle takes a long time to just find an empty parking space. Based on that required a monitoring system parking facilitate motorists want to park. The purpose of this study was to design and to make a realization of parking monitoring system where could be choosen the parking lot with RFId Technology.The software used in the system is designed using the C # language. In this system, the process to taking the data with microcontroller Atmega 16 as a main controller. The trial for this system done with simulation in a miniatur parking area. The result of the trial is the system can display about status of parking area. Continuous data retrieval system using RFID cards, and the system can replace the operator. The light sensor (LED AND LDR to logic 1 if no passing cars. Keywords: Parking, RFId, LED, LDR, Microcontroler, Atmega16, Microsoft Acess, C#

  5. Supply chain network design under uncertainty

    DEFF Research Database (Denmark)

    Govindan, Kannan; Fattahi, Mohammad; Keyvanshokooh, Esmaeil

    2017-01-01

    Supply chain network design (SCND) is one of the most crucial planning problems in supply chain management (SCM). Nowadays, design decisions should be viable enough to function well under complex and uncertain business environments for many years or decades. Therefore, it is essential to make...... programming, risk-averse stochastic programming, robust optimization, and fuzzy mathematical programming are explored in terms of mathematical modeling and solution approaches. Finally, the drawbacks and missing aspects of the related literature are highlighted and a list of potential issues for future...

  6. Cognitive MAC designs for OSA networks

    CERN Document Server

    Derakhshani, Mahsa

    2014-01-01

    This SpringerBrief presents recent advances in the cognitive MAC designs for opportunistic spectrum access (OSA) networks. It covers the basic MAC functionalities and MAC enhancements of IEEE 802.11. Later chapters discuss the existing MAC protocols for OSA and classify them based on characteristic features. The authors provide new research in adaptive carrier sensing-based MAC designs tailored for OSA, which optimize spectrum utilization and ensure a peaceful coexistence of licensed and unlicensed systems. Analytically devised via optimization and game-theoretic approaches, these adaptive M

  7. RTLS vs RFID partnership or competition?

    Directory of Open Access Journals (Sweden)

    2011-09-01

    Full Text Available The constant technological development entails increasing needs of a precise identification and location of objects. A natural and proved way of fulfilling identification needs is using Optical Character Recognition (OMR, mostly bar codes or Radio Frequency Identification (RFID. However, applying RFID to locate objects is a big challenge. In applications, which require both identification and location of objects, RTLS (Real-Time Location Systems can be very helpful. Apart from the identification, RTLS ensures also the real-time objects' location. A range of possible RTLS applications coincides with the ones of RFID. Does that mean that RTLS is a next stage of RFID development? In the following paper, the authors are pursuing to answer a question, if RTLS is complementary or competitive towards RFID?

  8. RFID Data Cleaning for Shop Floor Applications

    Science.gov (United States)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  9. Accurate Vehicle Location System Using RFID, an Internet of Things Approach

    Science.gov (United States)

    Prinsloo, Jaco; Malekian, Reza

    2016-01-01

    Modern infrastructure, such as dense urban areas and underground tunnels, can effectively block all GPS signals, which implies that effective position triangulation will not be achieved. The main problem that is addressed in this project is the design and implementation of an accurate vehicle location system using radio-frequency identification (RFID) technology in combination with GPS and the Global system for Mobile communication (GSM) technology, in order to provide a solution to the limitation discussed above. In essence, autonomous vehicle tracking will be facilitated with the use of RFID technology where GPS signals are non-existent. The design of the system and the results are reflected in this paper. An extensive literature study was done on the field known as the Internet of Things, as well as various topics that covered the integration of independent technology in order to address a specific challenge. The proposed system is then designed and implemented. An RFID transponder was successfully designed and a read range of approximately 31 cm was obtained in the low frequency communication range (125 kHz to 134 kHz). The proposed system was designed, implemented, and field tested and it was found that a vehicle could be accurately located and tracked. It is also found that the antenna size of both the RFID reader unit and RFID transponder plays a critical role in the maximum communication range that can be achieved. PMID:27271638

  10. Accurate Vehicle Location System Using RFID, an Internet of Things Approach.

    Science.gov (United States)

    Prinsloo, Jaco; Malekian, Reza

    2016-06-04

    Modern infrastructure, such as dense urban areas and underground tunnels, can effectively block all GPS signals, which implies that effective position triangulation will not be achieved. The main problem that is addressed in this project is the design and implementation of an accurate vehicle location system using radio-frequency identification (RFID) technology in combination with GPS and the Global system for Mobile communication (GSM) technology, in order to provide a solution to the limitation discussed above. In essence, autonomous vehicle tracking will be facilitated with the use of RFID technology where GPS signals are non-existent. The design of the system and the results are reflected in this paper. An extensive literature study was done on the field known as the Internet of Things, as well as various topics that covered the integration of independent technology in order to address a specific challenge. The proposed system is then designed and implemented. An RFID transponder was successfully designed and a read range of approximately 31 cm was obtained in the low frequency communication range (125 kHz to 134 kHz). The proposed system was designed, implemented, and field tested and it was found that a vehicle could be accurately located and tracked. It is also found that the antenna size of both the RFID reader unit and RFID transponder plays a critical role in the maximum communication range that can be achieved.

  11. Accurate Vehicle Location System Using RFID, an Internet of Things Approach

    Directory of Open Access Journals (Sweden)

    Jaco Prinsloo

    2016-06-01

    Full Text Available Modern infrastructure, such as dense urban areas and underground tunnels, can effectively block all GPS signals, which implies that effective position triangulation will not be achieved. The main problem that is addressed in this project is the design and implementation of an accurate vehicle location system using radio-frequency identification (RFID technology in combination with GPS and the Global system for Mobile communication (GSM technology, in order to provide a solution to the limitation discussed above. In essence, autonomous vehicle tracking will be facilitated with the use of RFID technology where GPS signals are non-existent. The design of the system and the results are reflected in this paper. An extensive literature study was done on the field known as the Internet of Things, as well as various topics that covered the integration of independent technology in order to address a specific challenge. The proposed system is then designed and implemented. An RFID transponder was successfully designed and a read range of approximately 31 cm was obtained in the low frequency communication range (125 kHz to 134 kHz. The proposed system was designed, implemented, and field tested and it was found that a vehicle could be accurately located and tracked. It is also found that the antenna size of both the RFID reader unit and RFID transponder plays a critical role in the maximum communication range that can be achieved.

  12. PENGADOPSIAN TEKNOLOGI RFID DI RUMAH SAKIT INDONESIA, MANFAAT DAN HAMBATANNYA

    OpenAIRE

    Iwan Vanany; Awaluddin Bin Mohamed Shaharoun

    2009-01-01

    This paper explores the benefit and barriers of RFID (Radio Frequency Identification) technology adoption in Indonesian hospitals context. The investigation methods of this research used interview and semi-structured questionnaire on RFID consultants, RFID researchers, and big hospital managers in Java Island. The benefits and barriers of RFID technology adoption are identified from literature review. The barriers of RFID technology adoption are divided into two aspects, i.e., as business and...

  13. Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications.

    Science.gov (United States)

    Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

    2016-12-24

    The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol.

  14. Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications

    Directory of Open Access Journals (Sweden)

    Tiago M. Fernández-Caramés

    2016-12-01

    Full Text Available The Internet of Things (IoT is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification, which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3 to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol.

  15. Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications

    Science.gov (United States)

    Fernández-Caramés, Tiago M.; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

    2016-01-01

    The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol. PMID:28029119

  16. Design and implementation about the campus wireless network

    International Nuclear Information System (INIS)

    Qi Fazhi; An Dehai; Wang Yanming; Cui Tao; Chen Gang; Liu Baoxu

    2007-01-01

    With the development of network applications, flexibility and wieldy is becoming more and more important for network users. Based on the analysis of the needs of campus wireless network. This article design and analysis the deployment mechanism, register system and protection system of wireless network. Built a wireless network system base on IHEP network environment, realization the 'always and everywhere' access the network in the IHEP campus area. (authors)

  17. A RFID grouping proof protocol for medication safety of inpatient.

    Science.gov (United States)

    Huang, Hsieh-Hong; Ku, Cheng-Yuan

    2009-12-01

    In order to provide enhanced medication safety for inpatients, the medical mechanism which adopts the modified grouping proof protocol is proposed in this paper. By using the grouping proof protocol, the medical staffs could confirm the authentication and integrity of a group of Radio-Frequency Identification (RFID) tags which are embedded on inpatient bracelets and the containers of drugs. This mechanism is designed to be compatible with EPCglobal Class-1 Generation-2 standard which is the most popular specification of RFID tags. Due to the light-weight computational capacity of passive tags, only the pseudo-random number generator (PRNG) and cyclic redundancy code (CRC) are allowed to be used in the communication protocol. Furthermore, a practical scenario of using this proposed mechanism in hospital to examine the medication safety is also presented.

  18. Keep on Blockin’ in the Free World: Personal Access Control for Low-Cost RFID Tags

    OpenAIRE

    Rieback, Melanie; Crispo, Bruno; Tanenbaum, Andrew

    2007-01-01

    This paper introduces an off-tag RFID access control mechanism called “Selective RFID Jamming”. Selective RFID Jamming protects low-cost RFID tags by enforcing access control on their behalf, in a similar manner to the RFID Blocker Tag. However, Selective RFID Jamming is novel because it uses an active mobile device to enforce centralized ACL-based access control policies. Selective RFID Jamming also solves a Differential Signal Analysis attack to which the RFID Blocker Tag is susceptible.

  19. Review on security issues in RFID systems

    Directory of Open Access Journals (Sweden)

    Mohamed El Beqqal

    2017-12-01

    Full Text Available Radio frequency Identification (RFID is currently considered as one of the most used technologies for an automatic identification of objects or people. Based on a combination of tags and readers, RFID technology has widely been applied in various areas including supply chain, production and traffic control systems. However, despite of its numerous advantages, the technology brings out many challenges and concerns still not being attracting more and more researchers especially the security and privacy issues. In this paper, we review some of the recent research works using RFID solutions and dealing with security and privacy issues, we define our specific parameters and requirements allowing us to classify for each work which part of the RFID system is being secured, the solutions and the techniques used besides the conformity to RFID standards. Finally, we present briefly a solution that consists of combining RFID with smartcard based biometric to enhance security especially in access control scenarios. Hence the result of our study aims to give a clear vision of available solutions and techniques used to prevent and secure the RFID system from specific threats and attacks.

  20. Keep on Blockin’ in the Free World: Personal Access Control for Low-Cost RFID Tags

    NARCIS (Netherlands)

    Rieback, Melanie; Crispo, Bruno; Tanenbaum, Andrew

    2007-01-01

    This paper introduces an off-tag RFID access control mechanism called “Selective RFID Jamming”. Selective RFID Jamming protects low-cost RFID tags by enforcing access control on their behalf, in a similar manner to the RFID Blocker Tag. However, Selective RFID Jamming is novel because it uses an

  1. Keep on Blockin' in the Free World: Personal Access Control for Low-Cost RFID Tags

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    2005-01-01

    This paper introduces an off-tag RFID access control mechanism called "Selective RFID Jamming". Selective RFID Jamming protects low-cost RFID tags by enforcing access control on their behalf, in a similar manner to the RFID Blocker Tag. However, Selective RFID Jamming is novel because it uses an

  2. Extended-Range Passive RFID and Sensor Tags

    Science.gov (United States)

    Fink, Patrick W.; Kennedy, Timothy F.; Lin, Gregory Y.; Barton, Richard

    2012-01-01

    Extended-range passive radio-frequency identification (RFID) tags and related sensor tags are undergoing development. A tag of this type incorporates a retroreflective antenna array, so that it reflects significantly more signal power back toward an interrogating radio transceiver than does a comparable passive RFID tag of prior design, which does not incorporate a retroreflective antenna array. Therefore, for a given amount of power radiated by the transmitter in the interrogating transceiver, a tag of this type can be interrogated at a distance greater than that of the comparable passive RFID or sensor tag of prior design. The retroreflective antenna array is, more specifically, a Van Atta array, named after its inventor and first published in a patent issued in 1959. In its simplest form, a Van Atta array comprises two antenna elements connected by a transmission line so that the signal received by each antenna element is reradiated by the other antenna element (see Figure 1). The phase relationships among the received and reradiated signals are such as to produce constructive interference of the reradiated signals; that is, to concentrate the reradiated signal power in a direction back toward the source. Hence, an RFID tag equipped with a Van Atta antenna array automatically tracks the interrogating transceiver. The effective gain of a Van Atta array is the same as that of a traditional phased antenna array having the same number of antenna elements. Additional pairs of antenna elements connected by equal-length transmission lines can be incorporated into a Van Atta array to increase its directionality. Like some RFID tags here-to-fore commercially available, an RFID or sensor tag of the present developmental type includes one-port surface-acoustic-wave (SAW) devices. In simplified terms, the mode of operation of a basic one-port SAW device as used heretofore in an RFID device is the following: An interrogating radio signal is converted, at an input end, from

  3. Analysis and design of networked control systems

    CERN Document Server

    You, Keyou; Xie, Lihua

    2015-01-01

    This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as: ·         minimum data rate for stabilization of linear systems over noisy channels; ·         minimum network requirement for stabilization of linear systems over fading channels; and ·         stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are de...

  4. RFID-BASED Prepaid Power Meter

    OpenAIRE

    Teymourzadeh, Rozita

    2013-01-01

    An Electric power meter is an important component in electric energy service. In the past, many consumers have complained about reading inaccurate of the electric meter. This research presents the development of an electrical power meter equipped with RFID reader. The RFID reader reads a valid RFID card and activates the power meter so that it can supply electricity. When the credit is about low or before the electricity is auto cut off, an SMS message will be sent to the user’s handphone to ...

  5. USING OF RFID TECHNOLOGY IN MAINTENANCE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Michal Balog

    2015-06-01

    Full Text Available Automated data collection helps to improve the precision of decision-making processes. Currently, the radio frequency identification technology belongs to the most common application in the field of identification technology. In the world, the implementation of RFID technology is used in almost all areas of industry. RFID tags allow to use of the different products and materials applications. The article provides an overview of using this technology to record and register maintenance intervals of railway wagons. The application of RFID technology helps to avoid huge disasters and accidents caused by lack of information about the technical state of rail freight wagons.

  6. RFID for libraries a practical guide

    CERN Document Server

    Pandian, M

    2010-01-01

    Many modern technologies give the impression that they somehow work by magic, particularly when they operate automatically and their mechanisms are invisible. A technology called RFID (Radio Frequency Identification), which is relatively new, has exactly this characteristic. Librarians everywhere are closely watching RFID technology. Advances over using bar codes on library materials, RFID tags are being touted as a way to radically redesign how library materials are handled. But it is expensive. The tags are vulnerable to wear and tear and the technology is not fully developed. It's unclear w

  7. Radio Frequency Identification (RFID) Based Employee Attendance Management System

    Science.gov (United States)

    Maramis, G. D. P.; Rompas, P. T. D.

    2018-02-01

    Manually recorded attendance of all the employees has produced some problems such as the data accuracy and staff performance efficiency. The objective of this research is to design and develop a software of RFID attendance system which is integrated with database system. This RFID attendance system was developed using several main components such as tags that will be used as a replacement of ID cards and a reader device that will read the information related to the employee attendance. The result of this project is a software of RFID attendance system that is integrated with the database and has a function to store the data or information of every single employee. This system has a maximum reading range of 2 cm with success probability of 1 and requires a minimum interval between readings of 2 seconds in order to achieve an optimal functionality. By using the system, the discipline attitude of the employees and also the performance of the staff will be improved instantly.

  8. Analysis and monitoring design for networks

    Energy Technology Data Exchange (ETDEWEB)

    Fedorov, V.; Flanagan, D.; Rowan, T.; Batsell, S.

    1998-06-01

    The idea of applying experimental design methodologies to develop monitoring systems for computer networks is relatively novel even though it was applied in other areas such as meteorology, seismology, and transportation. One objective of a monitoring system should always be to collect as little data as necessary to be able to monitor specific parameters of the system with respect to assigned targets and objectives. This implies a purposeful monitoring where each piece of data has a reason to be collected and stored for future use. When a computer network system as large and complex as the Internet is the monitoring subject, providing an optimal and parsimonious observing system becomes even more important. Many data collection decisions must be made by the developers of a monitoring system. These decisions include but are not limited to the following: (1) The type data collection hardware and software instruments to be used; (2) How to minimize interruption of regular network activities during data collection; (3) Quantification of the objectives and the formulation of optimality criteria; (4) The placement of data collection hardware and software devices; (5) The amount of data to be collected in a given time period, how large a subset of the available data to collect during the period, the length of the period, and the frequency of data collection; (6) The determination of the data to be collected (for instance, selection of response and explanatory variables); (7) Which data will be retained and how long (i.e., data storage and retention issues); and (8) The cost analysis of experiments. Mathematical statistics, and, in particular, optimal experimental design methods, may be used to address the majority of problems generated by 3--7. In this study, the authors focus their efforts on topics 3--5.

  9. Rancang Bangun Keanggotaan Perpustakaan STT Telematika Telkom Menggunakan RFID Berbasis Java 2 Standard Edition Dengan Konsep Client Server

    Directory of Open Access Journals (Sweden)

    Yana Yuniarsyah

    2013-05-01

    Full Text Available RFID technology is a new technology that hasn’t been widely applied. The existence of this technology can reduce the disadvantages of barcode technology. One application of RFID technology is used for a library card. STT Telematika Library is a library that uses a membership card to borrow and return transactions only. The existence of RFID technology in the card member can create a multifunctional card, in addition to borrow and return books transactions, membership cards can be used for visitor attendance too. Distribution of visitor attendance and report library using client-server concept, thus make it easier for librarians in data management. The programming language used in the design of Library Information System is a Java 2 Standard Edition (J2SE using NetBeans 7.0 as IDE. Storage Library using the MySQL database. Software design method using waterfall or linear sequential models. Model design to make information sistem using Unified Modeling Language (UML like usecase diagram, activity diagram, and class diagram. Database design model using Entity Relationship Diagram (ERD for development information library system. Testing library information system have form with testing user requirements, test the program using blacbox testing, and testing the user. RFID used for library information systems have form such as RFID reader which used to read the information carried by the RFID tag and RFID tag used to transmit information to the RFID reader. The success of the client-server concept comes from the success of visitor attendance and show a report from the client, and the success of server to store visitor attendance data.

  10. A Research on Issues Related to RFID Security and Privacy

    Science.gov (United States)

    Kim, Jongki; Yang, Chao; Jeon, Jinhwan

    Radio Frequency Identification (RFID) is a technology for automated identification of objects and people. RFID systems have been gaining more popularity in areas especially in supply chain management and automated identification systems. However, there are many existing and potential problems in the RFID systems which could threat the technology's future. To successfully adopt RFID technology in various applications, we need to develop the solutions to protect the RFID system's data information. This study investigates important issues related to privacy and security of RFID based on the recent literature and suggests solutions to cope with the problem.

  11. Ecological Interface Design for Computer Network Defense.

    Science.gov (United States)

    Bennett, Kevin B; Bryant, Adam; Sushereba, Christen

    2018-05-01

    A prototype ecological interface for computer network defense (CND) was developed. Concerns about CND run high. Although there is a vast literature on CND, there is some indication that this research is not being translated into operational contexts. Part of the reason may be that CND has historically been treated as a strictly technical problem, rather than as a socio-technical problem. The cognitive systems engineering (CSE)/ecological interface design (EID) framework was used in the analysis and design of the prototype interface. A brief overview of CSE/EID is provided. EID principles of design (i.e., direct perception, direct manipulation and visual momentum) are described and illustrated through concrete examples from the ecological interface. Key features of the ecological interface include (a) a wide variety of alternative visual displays, (b) controls that allow easy, dynamic reconfiguration of these displays, (c) visual highlighting of functionally related information across displays, (d) control mechanisms to selectively filter massive data sets, and (e) the capability for easy expansion. Cyber attacks from a well-known data set are illustrated through screen shots. CND support needs to be developed with a triadic focus (i.e., humans interacting with technology to accomplish work) if it is to be effective. Iterative design and formal evaluation is also required. The discipline of human factors has a long tradition of success on both counts; it is time that HF became fully involved in CND. Direct application in supporting cyber analysts.

  12. Authentication Test-Based the RFID Authentication Protocol with Security Analysis

    Directory of Open Access Journals (Sweden)

    Minghui Wang

    2014-08-01

    Full Text Available To the problem of many recently proposed RFID authentication protocol was soon find security holes, we analyzed the main reason, which is that protocol design is not rigorous, and the correctness of the protocol cannot be guaranteed. To this end, authentication test method was adopted in the process of the formal analysis and strict proof to the proposed RFID protocol in this paper. Authentication Test is a new type of analysis and design method of security protocols based on Strand space model, and it can be used for most types of the security protocols. After analysis the security, the proposed protocol can meet the RFID security demand: information confidentiality, data integrity and identity authentication.

  13. Scheduling and Topology Design in Networks with Directional Antennas

    Science.gov (United States)

    2017-05-19

    Scheduling and Topology Design in Networks with Directional Antennas Thomas Stahlbuhk, Nathaniel M. Jones, Brooke Shrader Lincoln Laboratory...controllers must choose which pairs of nodes should communicate in order to establish a topology over which traffic can be sent. Additionally...interacting effects of topology design and transmission scheduling in wireless networks, in particular focusing on networks where nodes are divided into

  14. 78 FR 75442 - Designation of the Primary Freight Network

    Science.gov (United States)

    2013-12-11

    ...] Designation of the Primary Freight Network AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Notice... period for the Designation of the highway Primary Freight Network (PFN) notice, which was published on... the complete National Freight Network (NFN), and to solicit comments on aspects of the NFN. The five...

  15. Applying RFID technology in nuclear materials management

    International Nuclear Information System (INIS)

    Tsai, H.; Chen, K.; Liu, Y.; Norair, J.P.; Bellamy, S.; Shuler, J.

    2008-01-01

    The Packaging Certification Program (PCP) of US Department of Energy (DOE) Environmental Management (EM), Office of Safety Management and Operations (EM-60), has developed a radio frequency identification (RFID) system for the management of nuclear materials. Argonne National Laboratory, a PCP supporting laboratory, and Savi Technology, a Lockheed Martin Company, are collaborating in the development of the RFID system, a process that involves hardware modification (form factor, seal sensor and batteries), software development and irradiation experiments. Savannah River National Laboratory and Argonne will soon field test the active RFID system on Model 9975 drums, which are used for storage and transportation of fissile and radioactive materials. Potential benefits of the RFID system are enhanced safety and security, reduced need for manned surveillance, real time access of status and history data, and overall cost effectiveness

  16. RFID Torque Sensing Tag System for Fasteners

    Science.gov (United States)

    Fink, Patrick W. (Inventor); Lin, Gregory Y. (Inventor); Ngo, Phong H. (Inventor); Kennedy, Timothy F. (Inventor)

    2016-01-01

    The present invention provides an RFID-based torque sensor that can be used to quickly monitor off the shelf fasteners including fasteners that are used in expensive satellites or other uses where fastener failure can be very costly. In one embodiment, an antenna, RFID ring and spring comprise a sensor tag that can be interrogated with an interrogation signal produced by an interrogator device. When sufficient torque is applied to the fastener, an RFID circuit is connected, and produces a radio frequency (RF) signal that can be read by the interrogator. In one embodiment, the RFID circuit does not transmit when the spring member is not compressed, thereby indicating insufficient tensioning of the fastener. The present invention offers the ability to remotely, quickly, and inexpensively verify that any number of fasteners are torqued properly upon initial installation. Where applicable, the present invention allows low cost monitoring over the life of the fastener.

  17. KNOWLEDGE AND ACCEPTANCE OF RFID TRACEABILITY SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Zoltan KATO

    2014-06-01

    Full Text Available In recent years the food market has become highly dynamic. Food crises in the early 90's, or those of the recent years, such as avian flu pandemic, swine flu, the cucumber or horse meat crises all had a negative impact on the Romanian food industry. Food deficiencies have led not only to contamination but also to the illness or death of some consumers. The products traceability is a prerequisite for success in the food industry. As a modern solution, RFID technology can be useful for traceability applications made with rewritable passive RFID tags. This paper aims to examine how RFID technology can be useful for traceability applications and will submit a diligent search regarding the degree of knowledge of RFID technology and the acceptance of an empirical model by the employees of Romanian companies.

  18. Entropy Applications to Water Monitoring Network Design: A Review

    Directory of Open Access Journals (Sweden)

    Jongho Keum

    2017-11-01

    Full Text Available Having reliable water monitoring networks is an essential component of water resources and environmental management. A standardized process for the design of water monitoring networks does not exist with the exception of the World Meteorological Organization (WMO general guidelines about the minimum network density. While one of the major challenges in the design of optimal hydrometric networks has been establishing design objectives, information theory has been successfully adopted to network design problems by providing measures of the information content that can be deliverable from a station or a network. This review firstly summarizes the common entropy terms that have been used in water monitoring network designs. Then, this paper deals with the recent applications of the entropy concept for water monitoring network designs, which are categorized into (1 precipitation; (2 streamflow and water level; (3 water quality; and (4 soil moisture and groundwater networks. The integrated design method for multivariate monitoring networks is also covered. Despite several issues, entropy theory has been well suited to water monitoring network design. However, further work is still required to provide design standards and guidelines for operational use.

  19. A 900 MHz, 21 dBm CMOS linear power amplifier with 35% PAE for RFID readers

    International Nuclear Information System (INIS)

    Han Kefeng; Cao Shengguo; Tan Xi; Yan Na; Wang Junyu; Tang Zhangwen; Min Hao

    2010-01-01

    A two-stage differential linear power amplifier (PA) fabricated by 0.18 μm CMOS technology is presented. An output matching and harmonic termination network is exploited to enhance the output power, efficiency and harmonic performance. Measurements show that the designed PA reaches a saturated power of 21.1 dBm and the peak power added efficiency (PAE) is 35.4%, the power gain is 23.3 dB from a power supply of 1.8 V and the harmonics are well controlled. The total area with ESD protected PAD is 1.2 x 0.55 mm 2 . System measurements also show that this power amplifier meets the design specifications and can be applied for RFID reader. (semiconductor integrated circuits)

  20. A 900 MHz, 21 dBm CMOS linear power amplifier with 35% PAE for RFID readers

    Energy Technology Data Exchange (ETDEWEB)

    Han Kefeng; Cao Shengguo; Tan Xi; Yan Na; Wang Junyu; Tang Zhangwen; Min Hao, E-mail: tanxi@fudan.edu.cn [State Key Laboratory of ASIC and System, Fudan University, Shanghai 201203 (China)

    2010-12-15

    A two-stage differential linear power amplifier (PA) fabricated by 0.18 {mu}m CMOS technology is presented. An output matching and harmonic termination network is exploited to enhance the output power, efficiency and harmonic performance. Measurements show that the designed PA reaches a saturated power of 21.1 dBm and the peak power added efficiency (PAE) is 35.4%, the power gain is 23.3 dB from a power supply of 1.8 V and the harmonics are well controlled. The total area with ESD protected PAD is 1.2 x 0.55 mm{sup 2}. System measurements also show that this power amplifier meets the design specifications and can be applied for RFID reader. (semiconductor integrated circuits)

  1. Performance and Benchmarking of Multisurface UHF RFID Tags for Readability and Reliability

    Directory of Open Access Journals (Sweden)

    Joshua Bolton

    2017-01-01

    Full Text Available As the price of passive radio frequency identification (RFID tags continues to decrease, more and more companies are considering item-level tagging. Although the use of RFID is simple, its proper application should be studied to achieve maximum efficiency and utilization in the industry. This paper is intended to demonstrate the test results of various multisurface UHF tags from different manufacturers for their readability under varying conditions such as orientation of tags with respect to reader, distance of tag from the reader, and materials used for embedding tags. These conditions could affect the reliability of RFID systems used for varied applications. In this paper, we implement a Design for Six Sigma Research (DFSS-R methodology that allows for reliability testing of RFID systems. In this paper, we have showcased our results about the benchmarking of UHF RFID tags and have put forward an important observation about the blind spots observed at different distances and orientations along different surfaces, which is primarily due to the polarity of the antenna chosen.

  2. Near Field UHF RFID Antenna System Enabling the Tracking of Small Laboratory Animals

    Directory of Open Access Journals (Sweden)

    Luca Catarinucci

    2013-01-01

    Full Text Available Radio frequency identification (RFID technology is more and more adopted in a wide range of applicative scenarios. In many cases, such as the tracking of small-size living animals for behaviour analysis purposes, the straightforward use of commercial solutions does not ensure adequate performance. Consequently, both RFID hardware and the control software should be tailored for the particular application. In this work, a novel RFID-based approach enabling an effective localization and tracking of small-sized laboratory animals is proposed. It is mainly based on a UHF Near Field RFID multiantenna system, to be placed under the animals’ cage, and able to rigorously identify the NF RFID tags implanted in laboratory animals (e.g., mice. Once the requirements of the reader antenna have been individuated, the antenna system has been designed and realized. Moreover, an algorithm based on the measured Received Signal Strength Indication (RSSI aiming at removing potential ambiguities in data captured by the multiantenna system has been developed and integrated. The animal tracking system has been largely tested on phantom mice in order to verify its ability to precisely localize each subject and to reconstruct its path. The achieved and discussed results demonstrate the effectiveness of the proposed tracking system.

  3. Efficiency and Privacy Enhancement for a Track and Trace System of RFID-Based Supply Chains

    Directory of Open Access Journals (Sweden)

    Xunjun Chen

    2015-06-01

    Full Text Available One of the major applications of Radio Frequency Identification (RFID technology is in supply chain management as it promises to provide real-time visibility based on the function of track and trace. However, such an RFID-based track and trace system raises new security and privacy challenges due to the restricted resource of tags. In this paper, we refine three privacy related models (i.e., the privacy, path unlinkability, and tag unlinkability of RFID-based track and trace systems, and clarify the relations among these privacy models. Specifically, we have proven that privacy is equivalent to path unlinkability and tag unlinkability implies privacy. Our results simplify the privacy concept and protocol design for RFID-based track and trace systems. Furthermore, we propose an efficient track and trace scheme, Tracker+, which allows for authentic and private identification of RFID-tagged objects in supply chains. In the Tracker+, no computational ability is required for tags, but only a few bytes of storage (such as EPC Class 1 Gen 2 tags are needed to store the tag state. Indeed, Tracker+ reduces the memory requirements for each tag by one group element compared to the Tracker presented in other literature. Moreover, Tracker+ provides privacy against supply chain inside attacks.

  4. Bistable responses in bacterial genetic networks: Designs and dynamical consequences

    Science.gov (United States)

    Tiwari, Abhinav; Ray, J. Christian J.; Narula, Jatin; Igoshin, Oleg A.

    2011-01-01

    A key property of living cells is their ability to react to stimuli with specific biochemical responses. These responses can be understood through the dynamics of underlying biochemical and genetic networks. Evolutionary design principles have been well studied in networks that display graded responses, with a continuous relationship between input signal and system output. Alternatively, biochemical networks can exhibit bistable responses so that over a range of signals the network possesses two stable steady states. In this review, we discuss several conceptual examples illustrating network designs that can result in a bistable response of the biochemical network. Next, we examine manifestations of these designs in bacterial master-regulatory genetic circuits. In particular, we discuss mechanisms and dynamic consequences of bistability in three circuits: two-component systems, sigma-factor networks, and a multistep phosphorelay. Analyzing these examples allows us to expand our knowledge of evolutionary design principles for networks with bistable responses. PMID:21385588

  5. A proposed scalable design and simulation of wireless sensor network-based long-distance water pipeline leakage monitoring system.

    Science.gov (United States)

    Almazyad, Abdulaziz S; Seddiq, Yasser M; Alotaibi, Ahmed M; Al-Nasheri, Ahmed Y; BenSaleh, Mohammed S; Obeid, Abdulfattah M; Qasim, Syed Manzoor

    2014-02-20

    Anomalies such as leakage and bursts in water pipelines have severe consequences for the environment and the economy. To ensure the reliability of water pipelines, they must be monitored effectively. Wireless Sensor Networks (WSNs) have emerged as an effective technology for monitoring critical infrastructure such as water, oil and gas pipelines. In this paper, we present a scalable design and simulation of a water pipeline leakage monitoring system using Radio Frequency IDentification (RFID) and WSN technology. The proposed design targets long-distance aboveground water pipelines that have special considerations for maintenance, energy consumption and cost. The design is based on deploying a group of mobile wireless sensor nodes inside the pipeline and allowing them to work cooperatively according to a prescheduled order. Under this mechanism, only one node is active at a time, while the other nodes are sleeping. The node whose turn is next wakes up according to one of three wakeup techniques: location-based, time-based and interrupt-driven. In this paper, mathematical models are derived for each technique to estimate the corresponding energy consumption and memory size requirements. The proposed equations are analyzed and the results are validated using simulation.

  6. A Proposed Scalable Design and Simulation of Wireless Sensor Network-Based Long-Distance Water Pipeline Leakage Monitoring System

    Directory of Open Access Journals (Sweden)

    Abdulaziz S. Almazyad

    2014-02-01

    Full Text Available Anomalies such as leakage and bursts in water pipelines have severe consequences for the environment and the economy. To ensure the reliability of water pipelines, they must be monitored effectively. Wireless Sensor Networks (WSNs have emerged as an effective technology for monitoring critical infrastructure such as water, oil and gas pipelines. In this paper, we present a scalable design and simulation of a water pipeline leakage monitoring system using Radio Frequency IDentification (RFID and WSN technology. The proposed design targets long-distance aboveground water pipelines that have special considerations for maintenance, energy consumption and cost. The design is based on deploying a group of mobile wireless sensor nodes inside the pipeline and allowing them to work cooperatively according to a prescheduled order. Under this mechanism, only one node is active at a time, while the other nodes are sleeping. The node whose turn is next wakes up according to one of three wakeup techniques: location-based, time-based and interrupt-driven. In this paper, mathematical models are derived for each technique to estimate the corresponding energy consumption and memory size requirements. The proposed equations are analyzed and the results are validated using simulation.

  7. RFID applications in transportation operation and intelligent transportation systems (ITS).

    Science.gov (United States)

    2009-06-01

    Radio frequency identification (RFID) transmits the identity of an object or a person wirelessly. It is grouped under : the broad category of automatic identification technologies with corresponding standards and established protocols. : RFID is suit...

  8. Simulator for testing hardware and software of the office system with RFID tags

    Directory of Open Access Journals (Sweden)

    Nowicki Tadeusz

    2017-01-01

    Full Text Available This paper presents the method for examining the properties of the RFID-tagged document management system. The system is composed of computers, where the software for supporting processes of the RFID-tagged documents was installed. Furthermore, the system cooperates with many other elements of the office (cabinets, sluices, copiers, try rider, end so one. The examination of the properties of the RFID-tagged document management system is, in this case, complex due to the number of a possible examination scenarios. The simulator method for examining the system properties was design and implemented. It allows to conduct the examination of the properties in a short period of time for numerous testing scenarios.

  9. Topology design and performance analysis of an integrated communication network

    Science.gov (United States)

    Li, V. O. K.; Lam, Y. F.; Hou, T. C.; Yuen, J. H.

    1985-01-01

    A research study on the topology design and performance analysis for the Space Station Information System (SSIS) network is conducted. It is begun with a survey of existing research efforts in network topology design. Then a new approach for topology design is presented. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. The algorithm for generating subsets is described in detail, and various aspects of the overall design procedure are discussed. Two more efficient versions of this algorithm (applicable in specific situations) are also given. Next, two important aspects of network performance analysis: network reliability and message delays are discussed. A new model is introduced to study the reliability of a network with dependent failures. For message delays, a collection of formulas from existing research results is given to compute or estimate the delays of messages in a communication network without making the independence assumption. The design algorithm coded in PASCAL is included as an appendix.

  10. Swarm size and iteration number effects to the performance of PSO algorithm in RFID tag coverage optimization

    Science.gov (United States)

    Prathabrao, M.; Nawawi, Azli; Sidek, Noor Azizah

    2017-04-01

    Radio Frequency Identification (RFID) system has multiple benefits which can improve the operational efficiency of the organization. The advantages are the ability to record data systematically and quickly, reducing human errors and system errors, update the database automatically and efficiently. It is often more readers (reader) is needed for the installation purposes in RFID system. Thus, it makes the system more complex. As a result, RFID network planning process is needed to ensure the RFID system works perfectly. The planning process is also considered as an optimization process and power adjustment because the coordinates of each RFID reader to be determined. Therefore, algorithms inspired by the environment (Algorithm Inspired by Nature) is often used. In the study, PSO algorithm is used because it has few number of parameters, the simulation time is fast, easy to use and also very practical. However, PSO parameters must be adjusted correctly, for robust and efficient usage of PSO. Failure to do so may result in disruption of performance and results of PSO optimization of the system will be less good. To ensure the efficiency of PSO, this study will examine the effects of two parameters on the performance of PSO Algorithm in RFID tag coverage optimization. The parameters to be studied are the swarm size and iteration number. In addition to that, the study will also recommend the most optimal adjustment for both parameters that is, 200 for the no. iterations and 800 for the no. of swarms. Finally, the results of this study will enable PSO to operate more efficiently in order to optimize RFID network planning system.

  11. Design alternatives for wavelength routing networks

    Science.gov (United States)

    Miliotis, K.; Papadimitriou, G. I.; Pomportsis, A. S.

    2003-03-01

    This paper attempts to provide a high level overview of many of the technologies employed in optical networks with a focus on wavelength-routing networks. Optical networks involve a number of technologies from the physics of light through protocols and networks architectures. In fact there is so much technology and know-how that most people involved with optical networks only have a full understanding of the narrow area they deal with. We start first examining the principles that govern light and its use as a wave guide, and then turn our focus to the various components that constitute an optical network and conclude with the description of all optical networks and wavelength-routed networks in greater detail.

  12. Compact broadband circularly polarised slot antenna for universal UHF RFID readers

    DEFF Research Database (Denmark)

    Xu, Bo; Zhang, Shuai; Liu, Yusha

    2015-01-01

    A compact broadband circularly polarised (CP) slot antenna is designed for universal ultra-high-frequency (UHF) radio frequency identification (RFID) readers. The antenna consists of an L-shaped metal strip and a square-slot-loaded ground plane with four tuning stubs. The total size is 100 mm×100mm......×1.6 mm. The measured –10 dB impedance bandwidth is 40.7% (772–1166 MHz) and the measured 3 dB axial ratio (AR) bandwidth is 13.9% (840–965 MHz). Both the impedance and AR bandwidth cover the worldwide UHF RFID band....

  13. PENGADOPSIAN TEKNOLOGI RFID DI RUMAH SAKIT INDONESIA, MANFAAT DAN HAMBATANNYA

    Directory of Open Access Journals (Sweden)

    Iwan Vanany

    2009-01-01

    Full Text Available This paper explores the benefit and barriers of RFID (Radio Frequency Identification technology adoption in Indonesian hospitals context. The investigation methods of this research used interview and semi-structured questionnaire on RFID consultants, RFID researchers, and big hospital managers in Java Island. The benefits and barriers of RFID technology adoption are identified from literature review. The barriers of RFID technology adoption are divided into two aspects, i.e., as business and technology aspects. The results of this study suggest that the benefits of RFID technology adoption are dominated of intangible benefit. Most of the respondents believed that the main barriers of RFID technology adoption are (1 the complexity of RFID technology (2 the lack of complete and valid information, and (3 there is no sufficient budget available. The detail of the outcomes and the implications of this reasarch are also discussed. Abstract in Bahasa Indonesia: Makalah ini berupaya mengeksplorasi manfaat dan hambatan dari pengadopsian teknologi RFID (Radio Frequency Identification dalam konteks rumah sakit di Indonesia. Metode investigasi dari penelitian ini menggunakan wawancara dan kuesioner semi-struktur untuk konsultan, peneliti teknologi RFID dan manajer rumah sakit berkatagori besar di Pulau Jawa. Manfaat-manfaat dan hambatan-hambatan dari pengadopsian teknologi RFID telah diidentifikasi dari studi literatur. Hambatan dari pengadopsian teknologi RFID dibagi menjadi dua (2 aspek yaitu hambatan dari aspek bisnis dan teknologi. Temuan dari studi ini meyakini bahwa manfaat dari pengadopsian teknologi RFID didominasi oleh manfaat yang bersifat intangible. Sebagian besar responden meyakini bahwa hambatan utama dari pengadopsian teknologi RFID adalah: (1 kompleksnya teknologi RFID, (2 ketiadaan informasi yang lengkap dan valid, (3 tidak tersedianya anggaran yang cukup. Detail dari hasil studi dan implikasinya akan didiskusikan selanjutnya. Kata kunci

  14. Effects of RFID Technology on the Logistics Innovation

    OpenAIRE

    金, 双鴿; Shuangge, JIN

    2010-01-01

    An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

  15. Development of Wireless RFID Glove for Various Applications

    Science.gov (United States)

    Lee, Changwon; Kim, Minchul; Park, Jinwoo; Oh, Jeonghoon; Eom, Kihwan

    Radio Frequency Identification is increasingly popular technology with many applications. The majority of applications of RFID are supply-chain management. In this paper, we proposed the development of wireless RFID Glove for various applications in real life. Proposed wireless RFID glove is composed of RFID reader of 13.56 MHz and RF wireless module. Proposed Gloves were applied to two applications. First is the interactive leaning and second is Meal aid system for blind people. The experimental results confirmed good performances.

  16. Analysis and Comparison of Typical Models within Distribution Network Design

    DEFF Research Database (Denmark)

    Jørgensen, Hans Jacob; Larsen, Allan; Madsen, Oli B.G.

    This paper investigates the characteristics of typical optimisation models within Distribution Network Design. During the paper fourteen models known from the literature will be thoroughly analysed. Through this analysis a schematic approach to categorisation of distribution network design models...... for educational purposes. Furthermore, the paper can be seen as a practical introduction to network design modelling as well as a being an art manual or recipe when constructing such a model....

  17. A meta-analysis of determinants of RFID adoption around the world: Organization, technology, and public policy

    Directory of Open Access Journals (Sweden)

    Sabinne Lee

    2017-01-01

    Full Text Available Purpose - This paper aims to explore various factors associated with radio frequency identification (RFID adoption with quantitative meta-analysis. More specifically, this paper attempts to measure key variables of RFID adoption derived from Rogers’ innovation theory and further examines how state intervention influences the process of RFID adoption. First, this paper compares, relying on a meta-analysis, various mean effect sizes among technological, organizational and environmental factors (i.e. government-driven policies that Rogers suggested in his innovation model. Design/methodology/approach - In mean effect size analysis, this paper finds that the technological factor is the most powerful factor that affects the RFID adoption. The technological factor is statistically significant across all regions, including North America, Europe and Asia. The organizational factor is significant only in developing countries like Southeast Asian countries and East Asian countries. Environmental factors like government intervention for facilitating RFID adoption are strong enough only in Southeast Asia and Europe. Findings - This paper finds that government’s supportive policy is more effective in Europe but not in America, while external pressure is still more effective in Southeast Asia. These results implicate that developmentalism or government-driven policy can be effective not only in developing countries but also in the case of developed countries. In addition, this paper conducts a seemingly unrelated regression (SUR analysis based on Fisher’s standardized score. Originality/value - In SUR analysis, this paper finds that the correlations between RFID adoption intention and three innovation factors vary across industrial areas. More specifically, the manufacturing area shows negative moderating effect on all three equations where correlations between Rogers’ innovation factors and RFID adoption intention are meta-dependent variables. Also

  18. Optimised Design and Analysis of All-Optical Networks

    DEFF Research Database (Denmark)

    Glenstrup, Arne John

    2002-01-01

    through various experiments and is shown to produce good results and to be able to scale up to networks of realistic sizes. A novel method, subpath wavelength grouping, for routing connections in a multigranular all-optical network where several wavelengths can be grouped and switched at band and fibre......This PhD thesis presents a suite of methods for optimising design and for analysing blocking probabilities of all-optical networks. It thus contributes methodical knowledge to the field of computer assisted planning of optical networks. A two-stage greenfield optical network design optimiser...... is developed, based on shortest-path algorithms and a comparatively new metaheuristic called simulated allocation. It is able to handle design of all-optical mesh networks with optical cross-connects, considers duct as well as fibre and node costs, and can also design protected networks. The method is assessed...

  19. Army Air and Missile Defense Network Design Facility (AAMDNDF)

    Data.gov (United States)

    Federal Laboratory Consortium — This facility provides JTIDS network designs and platform initialization load files for all Joint and Army-only tests, exercises, operations, and contingency events...

  20. Uniting Legislation with RFID Privacy-Enhancing Technologies

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    2005-01-01

    RFID is a popular identification and automation technology with serious security and privacy threats. Legislation expounds upon the actual security and privacy needs of people in RFID-enabled environments, while technology helps to ensure legal compliance. This paper examines the main aims of RFID

  1. An intelligent IoT emergency vehicle warning system using RFID and Wi-Fi technologies for emergency medical services.

    Science.gov (United States)

    Lai, Yeong-Lin; Chou, Yung-Hua; Chang, Li-Chih

    2018-01-01

    Collisions between emergency vehicles for emergency medical services (EMS) and public road users have been a serious problem, impacting on the safety of road users, emergency medical technicians (EMTs), and the patients on board. The aim of this study is to develop a novel intelligent emergency vehicle warning system for EMS applications. The intelligent emergency vehicle warning system is developed by Internet of Things (IoT), radio-frequency identification (RFID), and Wi-Fi technologies. The system consists of three major parts: a system trigger tag, an RFID system in an emergency vehicle, and an RFID system at an intersection. The RFID system either in an emergency vehicle or at an intersection contains a controller, an ultrahigh-frequency (UHF) RFID reader module, a Wi-Fi module, and a 2.4-GHz antenna. In addition, a UHF ID antenna is especially designed for the RFID system in an emergency vehicle. The IoT system provides real-time visual warning at an intersection and siren warning from an emergency vehicle in order to effectively inform road users about an emergency vehicle approaching. The developed intelligent IoT emergency vehicle warning system demonstrates the capabilities of real-time visual and siren warnings for EMS safety.

  2. An Operator Perspective from a Facility Evaluation of an RFID-Based UF6 Cylinder Accounting and Tracking System

    International Nuclear Information System (INIS)

    Martyn, Rose; Fitzgerald, Peter; Stehle, Nicholas D.; Rowe, Nathan C.; Younkin, James R.

    2011-01-01

    An operational field test of a Radio-Frequency Identification (RFID) system for tracking and accounting UF6 cylinders was conducted at the Global Nuclear Fuel Americas (GNF) fuel fabrication plant in 2009. The Cylinder Accountability and Tracking System (CATS) was designed and deployed by Oak Ridge National Laboratory (ORNL) and evaluated in cooperation with GNF. The system required that passive RFID be attached to several UF6 30B cylinders as they were received at the site; then the cylinders were tracked as they proceeded to interim storage, to processing in an autoclave, and eventually to disposition from the site. This CATS deployment also provided a direct integration of scale data from the site accountability scales. The integration of this information into the tracking data provided an attribute for additional safeguards for evaluation. The field test provided insight into the advantages and challenges of using RFID at an operating nuclear facility. The RFID system allowed operators to interact with the technology and demonstrated the survivability of the tags and reader equipment in the process environment. This paper will provide the operator perspective on utilizing RFID technology for locating cylinders within the facility, thereby tracking the cylinders for process and for Material Control and Accounting functions. The paper also will present the operator viewpoint on RFID implemented as an independent safeguards system.

  3. An RFID-Based Smart Nest Box: An Experimental Study of Laying Performance and Behavior of Individual Hens

    Directory of Open Access Journals (Sweden)

    Ying-Ren Chien

    2018-03-01

    Full Text Available This study designed a radio-frequency identification (RFID-based Internet of Things (IoT platform to create the core of a smart nest box. At the sensing level, we have deployed RFID-based sensors and egg detection sensors. A low-frequency RFID reader is installed in the bottom of the nest box and a foot ring RFID tag is worn on the leg of individual hens. The RFID-based sensors detect when a hen enters or exits the nest box. The egg-detection sensors are implemented with a resistance strain gauge pressure sensor, which weights the egg in the egg-collection tube. Thus, the smart nest box makes it possible to analyze the laying performance and behavior of individual hens. An evaluative experiment was performed using an enriched cage, a smart nest box, web camera, and monitoring console. The hens were allowed 14 days to become accustomed to the experimental environment before monitoring began. The proposed IoT platform makes it possible to analyze the egg yield of individual hens in real time, thereby enabling the replacement of hens with egg yield below a pre-defined level in order to meet the overall target egg yield rate. The results of this experiment demonstrate the efficacy of the proposed RFID-based smart nest box in monitoring the egg yield and laying behavior of individual hens.

  4. Designing network on-chip architectures in the nanoscale era

    CERN Document Server

    Flich, Jose

    2010-01-01

    Going beyond isolated research ideas and design experiences, Designing Network On-Chip Architectures in the Nanoscale Era covers the foundations and design methods of network on-chip (NoC) technology. The contributors draw on their own lessons learned to provide strong practical guidance on various design issues.Exploring the design process of the network, the first part of the book focuses on basic aspects of switch architecture and design, topology selection, and routing implementation. In the second part, contributors discuss their experiences in the industry, offering a roadmap to recent p

  5. Solving network design problems via decomposition, aggregation and approximation

    CERN Document Server

    Bärmann, Andreas

    2016-01-01

    Andreas Bärmann develops novel approaches for the solution of network design problems as they arise in various contexts of applied optimization. At the example of an optimal expansion of the German railway network until 2030, the author derives a tailor-made decomposition technique for multi-period network design problems. Next, he develops a general framework for the solution of network design problems via aggregation of the underlying graph structure. This approach is shown to save much computation time as compared to standard techniques. Finally, the author devises a modelling framework for the approximation of the robust counterpart under ellipsoidal uncertainty, an often-studied case in the literature. Each of these three approaches opens up a fascinating branch of research which promises a better theoretical understanding of the problem and an increasing range of solvable application settings at the same time. Contents Decomposition for Multi-Period Network Design Solving Network Design Problems via Ag...

  6. Track star : Merrick's RFID system tracks oilpatch equipment

    International Nuclear Information System (INIS)

    Louie, J.

    2006-01-01

    Designed by Merrick Systems, the new Rig-Hand system uses radio frequency identification (RFID) in conjunction with downhole components to manage both surface and downhole equipment. The Rig-Hand system consists of RFID tags which can either be installed to new pipe or retrofitted to existing components; handheld or fixed RFID tag readers; and, software modules. The tags can be mounted to a wide range of surface and downhole components. The system can be used by rig personnel to scan tags with handheld computers, or can be used by a designated reader for greater automation and efficiency. The software modules have been designed for typical rig, pipeyard and service company users. The system provides essential drillstring information that helps to reduce pipe failures, fishing costs and downtime. Component tracking may also impact on both personnel safety and operational risks, as a recent survey has suggested that 14 per cent of catastrophic drillstring failures are due to pipe fatigue. When drilling deviated wells, operators typically have difficulty tracking which pipe may have become fatigued. It is anticipated that the system will also allow for improved logistics management, as it is currently estimated that 70 per cent of casing returned from the wellsite to a pipe yard goes to rust. The tagged components will also demand a higher resale or salvage value than untagged components with limited traceability. The system has gone through extensive testing, and to date has provided extensive savings in both onshore and offshore rigs. Commercialization is expected by the end of 2006. 1 fig

  7. Track star : Merrick's RFID system tracks oilpatch equipment

    Energy Technology Data Exchange (ETDEWEB)

    Louie, J

    2006-10-15

    Designed by Merrick Systems, the new Rig-Hand system uses radio frequency identification (RFID) in conjunction with downhole components to manage both surface and downhole equipment. The Rig-Hand system consists of RFID tags which can either be installed to new pipe or retrofitted to existing components; handheld or fixed RFID tag readers; and, software modules. The tags can be mounted to a wide range of surface and downhole components. The system can be used by rig personnel to scan tags with handheld computers, or can be used by a designated reader for greater automation and efficiency. The software modules have been designed for typical rig, pipeyard and service company users. The system provides essential drillstring information that helps to reduce pipe failures, fishing costs and downtime. Component tracking may also impact on both personnel safety and operational risks, as a recent survey has suggested that 14 per cent of catastrophic drillstring failures are due to pipe fatigue. When drilling deviated wells, operators typically have difficulty tracking which pipe may have become fatigued. It is anticipated that the system will also allow for improved logistics management, as it is currently estimated that 70 per cent of casing returned from the wellsite to a pipe yard goes to rust. The tagged components will also demand a higher resale or salvage value than untagged components with limited traceability. The system has gone through extensive testing, and to date has provided extensive savings in both onshore and offshore rigs. Commercialization is expected by the end of 2006. 1 fig.

  8. The design and implementation of a network simulation platform

    CSIR Research Space (South Africa)

    Von Solms, S

    2013-11-01

    Full Text Available these events and their effects can enable researchers to identify these threats and find ways to counter them. In this paper we present the design of a network simulation platform which can enable researchers to study dynamic behaviour of networks, network...

  9. HF RFID versus UHF RFID--Technology for Library Service Transformation at City University of Hong Kong

    Science.gov (United States)

    Ching, Steve H.; Tai, Alice

    2009-01-01

    Since libraries first used RFID systems in the late 1990s, more and more libraries have identified the advantages of the technology. With advances in HF and UHF RFID, both alternatives are now viable in library applications. While some librarians are still skeptical towards UHF RFID as unproven in the library arena, the City University of Hong…

  10. U Patch Antenna for RFID and Wireless Applications

    International Nuclear Information System (INIS)

    Abi Saad, R.; Melhem, Z.; Nader, C.; Zaatar, Y.; Zaouk, D.

    2011-01-01

    in this paper, we propose a new multi-band patch antenna structure for embedded RFID (Radio Frequency Identification) readers and wireless communications. The proposed antenna is a dual band microstrip patch antenna using U-slot geometry. The operating frequencies of the proposed antenna are chosen as 2.4 and 0.9 (GHz), obtained by optimizing the physical dimensions of the U-slot. Several parameters have been investigated using Ansoft Designer software. The antenna is fed through a quarter wavelength transformer for impedance matching. An additional layer of alumina is added above the surface of the conductors to increase the performance of the antenna. (author)

  11. A Guide Management System Based on RFID and Bluetooth Technology

    Science.gov (United States)

    Li, Han-Sheng; Wang, Jun-Jun

    The most fundamental and important requirement of the tour guide in the tour process is to ensure the safety of tourists. In this paper, a portable guide management system is designed based on RFID technology, the Android software and blue-tooth communication technology. Through this system, the guide can get real-time information if some tourists are l behind, and send text message or dial to those tourists who are l behind immediately. The system reduces the roll-calling time on the tourists, improves the tour guide work efficiency and service quality.

  12. Towards Linking Virtual Models with Physical Objects in Construction using RFID

    DEFF Research Database (Denmark)

    Sørensen, Kristian Birch; Christiansson, Per; Svidt, Kjeld

    2008-01-01

    and the physical objects in the construction process can improve the information and knowledge handling from design to construction, operation and maintenance. The link can be created by use of Radio Frequency Identification (RFID) technology. This paper describes a review and assessment of existing ontologies...

  13. Fairness in Communication and Computer Network Design

    OpenAIRE

    Nilsson, Pål

    2006-01-01

    In communication networks, fair sharing of resources is an important issue for one main reason. The growth of network capacity is in general not matching the rapid growth of traffic. Consequently, the resources consumed by each user have to be limited. This implies that users cannot always be assigned the end-to-end bandwidth they ask for. Instead, the limited network resources should be distributed to users in a way that assures fair end-to-end bandwidth assignment among them. Obtaini...

  14. Hierarchical Network Design Using Simulated Annealing

    DEFF Research Database (Denmark)

    Thomadsen, Tommy; Clausen, Jens

    2002-01-01

    networks are described and a mathematical model is proposed for a two level version of the hierarchical network problem. The problem is to determine which edges should connect nodes, and how demand is routed in the network. The problem is solved heuristically using simulated annealing which as a sub......-algorithm uses a construction algorithm to determine edges and route the demand. Performance for different versions of the algorithm are reported in terms of runtime and quality of the solutions. The algorithm is able to find solutions of reasonable quality in approximately 1 hour for networks with 100 nodes....

  15. 基于RFID的生产线物料监控系统的设计与应用%Design and Application of Monitor and Control System Based on RFID for Product Line

    Institute of Scientific and Technical Information of China (English)

    谭杰; 赵昼辰; 何伟; 葛平; 张晓华; 王峥

    2006-01-01

    介绍了近年兴起的射频识别(RFID)技术的特点,并给出了一个实际加工生产线RFID的应用案例;说明了生产线物料监控系统的总体软、硬件架构体系;最后介绍了RFID智能操作终端.

  16. The Design, Experience and Practice of Networked Learning

    DEFF Research Database (Denmark)

    . The Design, Experience and Practice of Networked Learning will prove indispensable reading for researchers, teachers, consultants, and instructional designers in higher and continuing education; for those involved in staff and educational development, and for those studying post graduate qualifications...

  17. RFID: A key technology for Humanity

    Science.gov (United States)

    Duroc, Yvan; Tedjini, Smail

    2018-01-01

    The RFID (Radio Frequency IDentification) technology is a well-known wireless application for traceability, logistics, and access control. It became ubiquitous in industry and our daily life (ticketing, payment, passports, car keys, etc.). RFID is nowadays a standardized technology; its inherent advantages, which are unitary, identification, wireless communication, and low cost of tags, provide it with decisive practical benefits that drive new developments in terms of concepts and applications. This trend is largely confirmed by the market forecast, but also by its implementation in the area of health (smart hospital), assistance to persons, anti-counterfeiting, as well as by its perspective in terms of new paradigms for distributed ambient intelligence and the Internet of Things. The first part of this paper briefly reviews the fundamental concepts of the RFID technology, and shows its link with the radio science. A state of the art including the presentation of current performance and developments is also summarized. The second part illustrates the impact of RFID to the service of our society with a focus of applications in the field of autonomy and handicap. Finally, the last part highlights a panorama of perspectives and the future directions of RFID applications dedicated to the service of Humanity. xml:lang="fr"

  18. Filtering Redundant Data from RFID Data Streams

    Directory of Open Access Journals (Sweden)

    Hazalila Kamaludin

    2016-01-01

    Full Text Available Radio Frequency Identification (RFID enabled systems are evolving in many applications that need to know the physical location of objects such as supply chain management. Naturally, RFID systems create large volumes of duplicate data. As the duplicate data wastes communication, processing, and storage resources as well as delaying decision-making, filtering duplicate data from RFID data stream is an important and challenging problem. Existing Bloom Filter-based approaches for filtering duplicate RFID data streams are complex and slow as they use multiple hash functions. In this paper, we propose an approach for filtering duplicate data from RFID data streams. The proposed approach is based on modified Bloom Filter and uses only a single hash function. We performed extensive empirical study of the proposed approach and compared it against the Bloom Filter, d-Left Time Bloom Filter, and the Count Bloom Filter approaches. The results show that the proposed approach outperforms the baseline approaches in terms of false positive rate, execution time, and true positive rate.

  19. The Value of RFID Benefits vs Costs

    CERN Document Server

    2013-01-01

    RFID technology presents a great potential for creating competitive advantage. By automating and simplifying data collection, it lets users more accurately track assets and monitor key indicators, which in turn gives greater visibility to the operations. However, the benefits received from this technology will be determined by how well it is integrated with the business processes and overall information flow. Because of the fact that the decision to deploy RFID technology in an enterprise is a business decision instead of a technology decision, cost-benefit analysis is a key component of this decision. If an RFID deployment cannot be justified in terms of its economic value to the company, it is not likely to help the company; and consequently, it is not likely to remain a viable deployment over the long term.   The Value of RFID describes the business value of RFID and explains the costs and benefits of this technology comprehensively. Different investment evaluation models are proposed to use in various ap...

  20. Programmable multi-node quantum network design and simulation

    Science.gov (United States)

    Dasari, Venkat R.; Sadlier, Ronald J.; Prout, Ryan; Williams, Brian P.; Humble, Travis S.

    2016-05-01

    Software-defined networking offers a device-agnostic programmable framework to encode new network functions. Externally centralized control plane intelligence allows programmers to write network applications and to build functional network designs. OpenFlow is a key protocol widely adopted to build programmable networks because of its programmability, flexibility and ability to interconnect heterogeneous network devices. We simulate the functional topology of a multi-node quantum network that uses programmable network principles to manage quantum metadata for protocols such as teleportation, superdense coding, and quantum key distribution. We first show how the OpenFlow protocol can manage the quantum metadata needed to control the quantum channel. We then use numerical simulation to demonstrate robust programmability of a quantum switch via the OpenFlow network controller while executing an application of superdense coding. We describe the software framework implemented to carry out these simulations and we discuss near-term efforts to realize these applications.

  1. An Approach for Removing Redundant Data from RFID Data Streams

    Science.gov (United States)

    Mahdin, Hairulnizam; Abawajy, Jemal

    2011-01-01

    Radio frequency identification (RFID) systems are emerging as the primary object identification mechanism, especially in supply chain management. However, RFID naturally generates a large amount of duplicate readings. Removing these duplicates from the RFID data stream is paramount as it does not contribute new information to the system and wastes system resources. Existing approaches to deal with this problem cannot fulfill the real time demands to process the massive RFID data stream. We propose a data filtering approach that efficiently detects and removes duplicate readings from RFID data streams. Experimental results show that the proposed approach offers a significant improvement as compared to the existing approaches. PMID:22163730

  2. An Approach for Removing Redundant Data from RFID Data Streams

    Directory of Open Access Journals (Sweden)

    Hairulnizam Mahdin

    2011-10-01

    Full Text Available Radio frequency identification (RFID systems are emerging as the primary object identification mechanism, especially in supply chain management. However, RFID naturally generates a large amount of duplicate readings. Removing these duplicates from the RFID data stream is paramount as it does not contribute new information to the system and wastes system resources. Existing approaches to deal with this problem cannot fulfill the real time demands to process the massive RFID data stream. We propose a data filtering approach that efficiently detects and removes duplicate readings from RFID data streams. Experimental results show that the proposed approach offers a significant improvement as compared to the existing approaches.

  3. Wirelessly powered sensor networks and computational RFID

    CERN Document Server

    2013-01-01

    The Wireless Identification and Sensing Platform (WISP) is the first of a new class of RF-powered sensing and computing systems.  Rather than being powered by batteries, these sensor systems are powered by radio waves that are either deliberately broadcast or ambient.  Enabled by ongoing exponential improvements in the energy efficiency of microelectronics, RF-powered sensing and computing is rapidly moving along a trajectory from impossible (in the recent past), to feasible (today), toward practical and commonplace (in the near future). This book is a collection of key papers on RF-powered sensing and computing systems including the WISP.  Several of the papers grew out of the WISP Challenge, a program in which Intel Corporation donated WISPs to academic applicants who proposed compelling WISP-based projects.  The book also includes papers presented at the first WISP Summit, a workshop held in Berkeley, CA in association with the ACM Sensys conference, as well as other relevant papers. The book provides ...

  4. RFID technology for environmental remediation and radioactive waste management

    International Nuclear Information System (INIS)

    Tsai, Hanchung; Liu, Yung Y.; Shuler, James

    2011-01-01

    An advanced Radio Frequency Identification (RFID) system capable of tracking and monitoring a wide range of materials and components - from fissionable stocks to radioactive wastes - has been developed. The system offers a number of advantages, including enhanced safety, security and safeguards, reduced personnel exposure to radiation, and improved inventory control and cost-effectiveness. Using sensors, RFID tags can monitor the state of health of the tracked items and trigger alarms instantly when the normal ranges are violated. Nonvolatile memories in the tags can store sensor data, event records, as well as a contents manifest. Gamma irradiation tests showed that the tag components possess significant radiation resistance. Long-life batteries and smart management circuitries permit the tags to operate for up to 10 years without battery replacement. The tags have a near universal form factor, i.e., they can fit different package types. The read range is up to >100 m with no line-of-sight required. With careful implementation, even a large-size processing or storage facility with a complex configuration can be monitored with a handful of readers in a network. In transportation, by incorporating Global Positioning System (GPS), satellite/cellular communication technology, and secure Internet, situation awareness is assured continuously. The RFID system, when integrated with Geographic Information System (GIS) technology, can promptly provide content- and event-specific information to first responders and emergency management teams in case of incidents. In stand-alone applications, the monitoring and tracking data are contained within the local computer. With a secure Internet, information can be shared within the complex or even globally in real time. As with the deployment of any new technology, overcoming the cultural resistance is part of the developmental process. With a strong institutional support and multiple successful live demonstrations, the cultural

  5. A genetic algorithm for solving supply chain network design model

    Science.gov (United States)

    Firoozi, Z.; Ismail, N.; Ariafar, S. H.; Tang, S. H.; Ariffin, M. K. M. A.

    2013-09-01

    Network design is by nature costly and optimization models play significant role in reducing the unnecessary cost components of a distribution network. This study proposes a genetic algorithm to solve a distribution network design model. The structure of the chromosome in the proposed algorithm is defined in a novel way that in addition to producing feasible solutions, it also reduces the computational complexity of the algorithm. Computational results are presented to show the algorithm performance.

  6. Game Theoretic Problems in Network Economics and Mechanism Design Solutions

    CERN Document Server

    Narahari, Y; Narayanam, Ramasuri; Prakash, Hastagiri

    2009-01-01

    Explores game theoretic modeling and mechanism design for problem solving in Internet and network economics. This monograph contains an exposition of representative game theoretic problems in three different network economics situations and a systematic exploration of mechanism design solutions to these problems.

  7. Design Management in the Textile Industry - A Network Perspective

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Bang, Anne Louise

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies on de...... management in order to maintain the relationships in their network of customers and suppliers....

  8. Designing in-building optical fiber networks

    NARCIS (Netherlands)

    Koonen, A.M.J.; Boom, van den H.P.A.; Tangdiongga, E.; Jung, H.D.; Guignard, P.

    2010-01-01

    Optical fiber in-building networks carrying wired and wireless services can outperform CAT-5E networks regarding versatility and installation costs. POF-based point-to-point architectures are optimum for small buildings, and (optically routed) SMF-based bus architectures for larger buildings.

  9. Designing for Privacy in Ubiquitous Social Networking

    DEFF Research Database (Denmark)

    Sapuppo, Antonio; Figueiras, Joao

    2015-01-01

    Improving human communication during face–to–face meetings is nowadays possible by transferring online social networking benefits to the physical world. This is enabled by the ubiquitous social networking services that became available by means of wirelessly interconnected smart devices...

  10. Sécurité et protection de la vie privée dans les systèmes RFID, appliquées aux réseaux EPCglobal

    OpenAIRE

    Tounsi , Wiem

    2014-01-01

    La technologie Radio Frequency IDentification (RFID) est un moyen d'automatiser l'identification et le stockage des informations dans des étiquettes RFID. Ces étiquettes peuvent être fixées ou intégrées à un objet à identifier et sont lues par un lecteur RFID. Electronic Product Code (EPC) Classe 1 Génération 2 (appelé Gen2) est un exemple typique des étiquettes RFID passives. Il représente l'élément clé d'une architecture RFID, nommée EPCglobal network. Ces étiquettes peuvent contenir plus d...

  11. Study of Development for RFID System to Hospital Environment.

    Science.gov (United States)

    Hong, Seung Kwon; Sung, Myung-Whun

    2015-01-01

    RFID/USN develops information systems for anytime, anywhere to anybody access Electronic Medical Records (EMR). The goal of the present study is to develop a RFID/USN-based information system for the hospital environment. First, unable to recognize, second, able to recognize as a pursuit of place and suppose the time of medical examination. A retrospective analysis of 235 RFID monitoring results, from four ENT ambulatory clinics of Seoul National University Hospital were extracted by a reader program and monitoring of RFID tag (2006.11.16~2006.12.16). RFID detection for sensing reader of this study has been put into representing "place" and "spending time" of patients for medical history taking and examination. Through the RFID of detection for specific place and spending time of medical examination, RFID/USN develops information system progressing in the EMR of hospital system.

  12. Vulnerabilities in First-Generation RFID-enabled Credit Cards

    Science.gov (United States)

    Heydt-Benjamin, Thomas S.; Bailey, Daniel V.; Fu, Kevin; Juels, Ari; O'Hare, Tom

    RFID-enabled credit cards are widely deployed in the United States and other countries, but no public study has thoroughly analyzed the mechanisms that provide both security and privacy. Using samples from a variety of RFID-enabled credit cards, our study observes that (1) the cardholder's name and often credit card number and expiration are leaked in plaintext to unauthenticated readers, (2) our homemade device costing around 150 effectively clones one type of skimmed cards thus providing a proof-of-concept implementation for the RF replay attack, (3) information revealed by the RFID transmission cross contaminates the security of RFID and non-RFID payment contexts, and (4) RFID-enabled credit cards are susceptible in various degrees to a range of other traditional RFID attacks such as skimming and relaying.

  13. Design and Realization of Network Teaching System

    Directory of Open Access Journals (Sweden)

    Ji Shan Shan

    2016-01-01

    Full Text Available Since 21 century, with the wide spread in family and public, network has been applied in many new fields, and the application in classes is of no exception. In traditional education, teachers give lessons to students face to face. Hence, the teaching quality depends largely on the quality and initiative of the individual teacher. However, the serious disadvantages of this mode are that teachers completely dominate the classroom and may ignore the subjective cognition role of the students, which may be bad for the growth of creativity and the innovative thinking ability. Obviously, traditional education mode cannot meet the requirements of the this new era which leads to the booming developing tendency of the network. As a new teaching measure, scientifically combining modern information technology and teaching practice, network teaching not only changes the traditional education by the means and form, but even also gives new meanings to teaching concept, process, method as well as teacher-student role and other deep levels. With the help of network teaching system, on-line classroom learning, relevant information systematization, standardization and automation, this system provides students with an efficient online learning method with high quality. This also helps to solve the disadvantages of the traditional teaching mode and promote the teaching methods to a new stage. It improves the network teaching platform, enriches the network teaching resources, and establishes a network teaching system, so as to improve information quality of teachers and students and assist in improving teaching quality of schools.

  14. Semantic-Based RFID Data Management

    Science.gov (United States)

    de Virgilio, Roberto; di Sciascio, Eugenio; Ruta, Michele; Scioscia, Floriano; Torlone, Riccardo

    Traditional Radio-Frequency IDentification (RFID) applications have been focused on replacing bar codes in supply chain management. Leveraging a ubiquitous computing architecture, the chapter presents a framework allowing both quick decentralized on-line item discovery and centralized off-line massive business logic analysis, according to needs and requirements of supply chain actors. A semantic-based environment, where tagged objects become resources exposing to an RFID reader not a trivial identification code but a semantic annotation, enables tagged objects to describe themselves on the fly without depending on a centralized infrastructure. On the other hand, facing on data management issues, a proposal is formulated for an effective off-line multidimensional analysis of huge amounts of RFID data generated and stored along the supply chain.

  15. Dampak RFID pada Stok Barang Retailer

    Directory of Open Access Journals (Sweden)

    I Gusti Made Karmawan

    2012-06-01

    Full Text Available The development of RFID technology (Radio Frequency Identification offers some advantages, especially in goods distribution, supply chain and logistics. This technology works by putting a chip on an item as a replacement for barcodes that are widely used today. With the RFID technology, the process of goodsidentification becomes very easy and fast. Therefore, some large companies have started implementing and trust the system, especially the supermarket retailers although there are still some problems encountered in the application of this system, related to issues of privacy and data integrity problems. This paper discusses how RFID works and the impacts to the company related to profits and problems encountered during the application of this system.

  16. Designing Industrial Networks Using Ecological Food Web Metrics.

    Science.gov (United States)

    Layton, Astrid; Bras, Bert; Weissburg, Marc

    2016-10-18

    Biologically Inspired Design (biomimicry) and Industrial Ecology both look to natural systems to enhance the sustainability and performance of engineered products, systems and industries. Bioinspired design (BID) traditionally has focused on a unit operation and single product level. In contrast, this paper describes how principles of network organization derived from analysis of ecosystem properties can be applied to industrial system networks. Specifically, this paper examines the applicability of particular food web matrix properties as design rules for economically and biologically sustainable industrial networks, using an optimization model developed for a carpet recycling network. Carpet recycling network designs based on traditional cost and emissions based optimization are compared to designs obtained using optimizations based solely on ecological food web metrics. The analysis suggests that networks optimized using food web metrics also were superior from a traditional cost and emissions perspective; correlations between optimization using ecological metrics and traditional optimization ranged generally from 0.70 to 0.96, with flow-based metrics being superior to structural parameters. Four structural food parameters provided correlations nearly the same as that obtained using all structural parameters, but individual structural parameters provided much less satisfactory correlations. The analysis indicates that bioinspired design principles from ecosystems can lead to both environmentally and economically sustainable industrial resource networks, and represent guidelines for designing sustainable industry networks.

  17. Design and implementation of dynamic hybrid Honeypot network

    Science.gov (United States)

    Qiao, Peili; Hu, Shan-Shan; Zhai, Ji-Qiang

    2013-05-01

    The method of constructing a dynamic and self-adaptive virtual network is suggested to puzzle adversaries, delay and divert attacks, exhaust attacker resources and collect attacking information. The concepts of Honeypot and Honeyd, which is the frame of virtual Honeypot are introduced. The techniques of network scanning including active fingerprint recognition are analyzed. Dynamic virtual network system is designed and implemented. A virtual network similar to real network topology is built according to the collected messages from real environments in this system. By doing this, the system can perplex the attackers when Hackers attack and can further analyze and research the attacks. The tests to this system prove that this design can successfully simulate real network environment and can be used in network security analysis.

  18. Topological Effects and Performance Optimization in Transportation Continuous Network Design

    Directory of Open Access Journals (Sweden)

    Jianjun Wu

    2014-01-01

    Full Text Available Because of the limitation of budget, in the planning of road works, increased efforts should be made on links that are more critical to the whole traffic system. Therefore, it would be helpful to model and evaluate the vulnerability and reliability of the transportation network when the network design is processing. This paper proposes a bilevel transportation network design model, in which the upper level is to minimize the performance of the network under the given budgets, while the lower level is a typical user equilibrium assignment problem. A new solution approach based on particle swarm optimization (PSO method is presented. The topological effects on the performance of transportation networks are studied with the consideration of three typical networks, regular lattice, random graph, and small-world network. Numerical examples and simulations are presented to demonstrate the proposed model.

  19. Synthesis and Design of Integrated Process and Water Networks

    DEFF Research Database (Denmark)

    Handani, Zainatul B.; Quaglia, Alberto; Gani, Rafiqul

    2015-01-01

    This work presents the development of a systematic framework for a simultaneous synthesis and design of process and water networks using the superstructure-based optimization approach. In this framework, a new superstructure combining both networks is developed by attempting to consider all...... possible options with respect to the topology of the process and water networks, leading to Mixed Integer Non Linear Programming (MINLP) problem. A solution strategy to solve the multi-network problem accounts explicitly the interactions between the networks by selecting suitable technologies in order...... to transform raw materials into products and produce clean water to be reused in the process at the early stage of design. Since the connection between the process network and the wastewater treatment network is not a straight forward connection, a new converter interval is introduced in order to convert...

  20. Heuristic urban transportation network design method, a multilayer coevolution approach

    Science.gov (United States)

    Ding, Rui; Ujang, Norsidah; Hamid, Hussain bin; Manan, Mohd Shahrudin Abd; Li, Rong; Wu, Jianjun

    2017-08-01

    The design of urban transportation networks plays a key role in the urban planning process, and the coevolution of urban networks has recently garnered significant attention in literature. However, most of these recent articles are based on networks that are essentially planar. In this research, we propose a heuristic multilayer urban network coevolution model with lower layer network and upper layer network that are associated with growth and stimulate one another. We first use the relative neighbourhood graph and the Gabriel graph to simulate the structure of rail and road networks, respectively. With simulation we find that when a specific number of nodes are added, the total travel cost ratio between an expanded network and the initial lower layer network has the lowest value. The cooperation strength Λ and the changeable parameter average operation speed ratio Θ show that transit users' route choices change dramatically through the coevolution process and that their decisions, in turn, affect the multilayer network structure. We also note that the simulated relation between the Gini coefficient of the betweenness centrality, Θ and Λ have an optimal point for network design. This research could inspire the analysis of urban network topology features and the assessment of urban growth trends.

  1. Optimization of robustness of interdependent network controllability by redundant design.

    Directory of Open Access Journals (Sweden)

    Zenghu Zhang

    Full Text Available Controllability of complex networks has been a hot topic in recent years. Real networks regarded as interdependent networks are always coupled together by multiple networks. The cascading process of interdependent networks including interdependent failure and overload failure will destroy the robustness of controllability for the whole network. Therefore, the optimization of the robustness of interdependent network controllability is of great importance in the research area of complex networks. In this paper, based on the model of interdependent networks constructed first, we determine the cascading process under different proportions of node attacks. Then, the structural controllability of interdependent networks is measured by the minimum driver nodes. Furthermore, we propose a parameter which can be obtained by the structure and minimum driver set of interdependent networks under different proportions of node attacks and analyze the robustness for interdependent network controllability. Finally, we optimize the robustness of interdependent network controllability by redundant design including node backup and redundancy edge backup and improve the redundant design by proposing different strategies according to their cost. Comparative strategies of redundant design are conducted to find the best strategy. Results shows that node backup and redundancy edge backup can indeed decrease those nodes suffering from failure and improve the robustness of controllability. Considering the cost of redundant design, we should choose BBS (betweenness-based strategy or DBS (degree based strategy for node backup and HDF(high degree first for redundancy edge backup. Above all, our proposed strategies are feasible and effective at improving the robustness of interdependent network controllability.

  2. Designing optimal greenhouse gas monitoring networks for Australia

    Science.gov (United States)

    Ziehn, T.; Law, R. M.; Rayner, P. J.; Roff, G.

    2016-01-01

    Atmospheric transport inversion is commonly used to infer greenhouse gas (GHG) flux estimates from concentration measurements. The optimal location of ground-based observing stations that supply these measurements can be determined by network design. Here, we use a Lagrangian particle dispersion model (LPDM) in reverse mode together with a Bayesian inverse modelling framework to derive optimal GHG observing networks for Australia. This extends the network design for carbon dioxide (CO2) performed by Ziehn et al. (2014) to also minimise the uncertainty on the flux estimates for methane (CH4) and nitrous oxide (N2O), both individually and in a combined network using multiple objectives. Optimal networks are generated by adding up to five new stations to the base network, which is defined as two existing stations, Cape Grim and Gunn Point, in southern and northern Australia respectively. The individual networks for CO2, CH4 and N2O and the combined observing network show large similarities because the flux uncertainties for each GHG are dominated by regions of biologically productive land. There is little penalty, in terms of flux uncertainty reduction, for the combined network compared to individually designed networks. The location of the stations in the combined network is sensitive to variations in the assumed data uncertainty across locations. A simple assessment of economic costs has been included in our network design approach, considering both establishment and maintenance costs. Our results suggest that, while site logistics change the optimal network, there is only a small impact on the flux uncertainty reductions achieved with increasing network size.

  3. Designing Network-based Business Model Ontology

    DEFF Research Database (Denmark)

    Hashemi Nekoo, Ali Reza; Ashourizadeh, Shayegheh; Zarei, Behrouz

    2015-01-01

    Survival on dynamic environment is not achieved without a map. Scanning and monitoring of the market show business models as a fruitful tool. But scholars believe that old-fashioned business models are dead; as they are not included the effect of internet and network in themselves. This paper...... is going to propose e-business model ontology from the network point of view and its application in real world. The suggested ontology for network-based businesses is composed of individuals` characteristics and what kind of resources they own. also, their connections and pre-conceptions of connections...... such as shared-mental model and trust. However, it mostly covers previous business model elements. To confirm the applicability of this ontology, it has been implemented in business angel network and showed how it works....

  4. Using Interference to Block RFID Tags

    DEFF Research Database (Denmark)

    Krigslund, Rasmus; Popovski, Petar; Pedersen, Gert Frølund

    We propose a novel method to block RFID tags from responding, using intentional interference. We focus on the experimental evaluation, where we impose interference on the download and uplink, respectively. The results are positive, where modulated CCI shows most effective to block a tag.......We propose a novel method to block RFID tags from responding, using intentional interference. We focus on the experimental evaluation, where we impose interference on the download and uplink, respectively. The results are positive, where modulated CCI shows most effective to block a tag....

  5. UHF RFID technologies for identification and traceability

    CERN Document Server

    Laheurte, Jean-Marc; Paret, Dominique; Loussert, Christophe

    2014-01-01

    UHF Radio Frequency Identification (RFID) is an electronic tagging technology that allows an object, place or person to be automatically identified at a distance without a direct line-of-sight using a radio wave exchange. Applications include inventory tracking, prescription medication tracking and authentication, secure automobile keys, and access control for secure facilities. This book begins with an overview of UHF RFID challenges describing the applications, markets, trades and basic technologies. It follows this by highlighting the main features distinguishing UHF (860MHz-960MHz) and HF

  6. RFID and IOT for Attendance Monitoring System

    Directory of Open Access Journals (Sweden)

    Dedy Irawan Joseph

    2018-01-01

    Full Text Available In recent years, RFID technology has been widely used in various sectors, such as in-education, transportation, agriculture, animal husbandry, store sales and other sectors. RFID utilization in education is student attendance monitoring system, by using Internet of Things (IoT and Cloud technology, it will produce a real time attendance monitoring system that can be accessed by various parties, such as lecturer, campus administration and parents. With this monitoring system if there are students who are not present can be immediately discovered and can be taken immediate action and the learning process can run smoothly.

  7. RFID in libraries a step toward interoperability

    CERN Document Server

    Ayre, Lori Bowen

    2012-01-01

    The approval by The National Information Standards Organization (NISO) of a new standard for RFID in libraries is a big step toward interoperability among libraries and vendors. By following this set of practices and procedures, libraries can ensure that an RFID tag in one library can be used seamlessly by another, assuming both comply, even if they have different suppliers for tags, hardware, and software. In this issue of Library Technology Reports, Lori Bowen Ayre, an experienced implementer of automated materials handling systems, Provides background on the evolution of the standard

  8. Designing inclusion and exclusion in labour market governance networks

    DEFF Research Database (Denmark)

    Damgaard, Bodil

    This paper explores the issue of inclusion in governance networks. It shows that mainstream understandings of inclusion in societal steering – perspectives on governance networks, neocorporatism and neopluralism – mainly focus on structural characteristics of potential members of governance...... networks and do not adequately explain who actually gets access to these networks. Instead I argue that we need to analyse actions taken consciously and deliberately to design inclusion – as well as exclusion – in governance networks, i.e. we need to bring agency into the analysis and analyse...

  9. On the Adaptive Design Rules of Biochemical Networks in Evolution

    Directory of Open Access Journals (Sweden)

    Bor-Sen Chen

    2007-01-01

    Full Text Available Biochemical networks are the backbones of physiological systems of organisms. Therefore, a biochemical network should be sufficiently robust (not sensitive to tolerate genetic mutations and environmental changes in the evolutionary process. In this study, based on the robustness and sensitivity criteria of biochemical networks, the adaptive design rules are developed for natural selection in the evolutionary process. This will provide insights into the robust adaptive mechanism of biochemical networks in the evolutionary process. We find that if a mutated biochemical network satisfies the robustness and sensitivity criteria of natural selection, there is a high probability for the biochemical network to prevail during natural selection in the evolutionary process. Since there are various mutated biochemical networks that can satisfy these criteria but have some differences in phenotype, the biochemical networks increase their diversities in the evolutionary process. The robustness of a biochemical network enables co-option so that new phenotypes can be generated in evolution. The proposed robust adaptive design rules of natural selection gain much insight into the evolutionary mechanism and provide a systematic robust biochemical circuit design method of biochemical networks for biotechnological and therapeutic purposes in the future.

  10. The Design and Analysis of Virtual Network Configuration for a Wireless Mobile ATM Network

    OpenAIRE

    Bush, Stephen F.

    1999-01-01

    This research concentrates on the design and analysis of an algorithm referred to as Virtual Network Configuration (VNC) which uses predicted future states of a system for faster network configuration and management. VNC is applied to the configuration of a wireless mobile ATM network. VNC is built on techniques from parallel discrete event simulation merged with constraints from real-time systems and applied to mobile ATM configuration and handoff. Configuration in a mobile network is a dyna...

  11. Copper thin film for RFID UHF antenna on flexible substrate

    International Nuclear Information System (INIS)

    Tran, Nhan Ai; Tran, Huy Nam; Dang, Mau Chien; Fribourg-Blanc, Eric

    2010-01-01

    A process flow using photolithography and sputtering was studied for copper antenna fabrication on thin poly(ethylene terephthalate) (PET) substrate. The lift-off route was chosen for its flexibility at laboratory scale. It was clarified that the cleaning of PET is an important step that necessitates mild oxygen plasma etching. Then copper is sputter deposited after photolithographic definition of the antenna. Care is necessary since PET, as a very flexible substrate, is temperature sensitive. The temperature increase generated by the impact of deposited copper should be maintained below the glass transition temperature of the polymer to avoid detrimental deformation. dc power of 40 to 50 W was found to be the maximum possible sputtering power for commercial PET. It was found that the resistivity of the thin film is below two times the bulk resistivity of copper for a deposition pressure below 4×10 −3  mbar and thickness above 450 nm. These results enable the reliable fabrication of copper RFID UHF antennae on a PET substrate for further testing of new tag designs. The present paper summarizes the effort to test new designs of antennae for RadioFrequency IDentification (RFID) Ultra High Frequency (UHF) tags, for use in various applications (e.g. object tracking and environment monitoring) in Vietnam

  12. A Minkowski Fractal Circularly Polarized Antenna for RFID Reader

    Directory of Open Access Journals (Sweden)

    Yanzhong Yu

    2014-11-01

    Full Text Available A design of fractal-like antenna with circular polarization for radio frequency identification (RFID reader applications is presented in this article. The modified Minkowski fractal structure is adopted as radiating patch for size reduction and broadband operation. A corner-truncated technology and a slot-opened method are employed to realize circular polarization and improve the gain of the proposed antenna, respectively. The proposed antenna is analyzed and optimized by HFSS. Return loss and maximum gain of the optimized antenna achieve to -22.2 dB and 1.12 dB at 920 MHz, respectively. The optimized design has an axial ratio (AR of 1.2 dB at central frequency of 920 MHz and impedance bandwidth (S11<=-10 dB of 40 MHz (4.3 %. Its input impedance is (57.9-j2.6 W that is close to input impedance of coaxial line (50 W. Numerical results demonstrate that the optimized antenna exhibits acceptable performances and may satisfy requirements of RFID reader applications.

  13. Optimal Placement Method of RFID Readers in Industrial Rail Transport for Uneven Rail Traflc Volume Management

    Science.gov (United States)

    Rakhmangulov, Aleksandr; Muravev, Dmitri; Mishkurov, Pavel

    2016-11-01

    The issue of operative data reception on location and movement of railcars is significant the constantly growing requirements of the provision of timely and safe transportation. The technical solution for efficiency improvement of data collection on rail rolling stock is the implementation of an identification system. Nowadays, there are several such systems, distinguished in working principle. In the authors' opinion, the most promising for rail transportation is the RFID technology, proposing the equipping of the railway tracks by the stationary points of data reading (RFID readers) from the onboard sensors on the railcars. However, regardless of a specific type and manufacturer of these systems, their implementation is affiliated with the significant financing costs for large, industrial, rail transport systems, owning the extensive network of special railway tracks with a large number of stations and loading areas. To reduce the investment costs for creation, the identification system of rolling stock on the special railway tracks of industrial enterprises has developed the method based on the idea of priority installation of the RFID readers on railway hauls, where rail traffic volumes are uneven in structure and power, parameters of which is difficult or impossible to predict on the basis of existing data in an information system. To select the optimal locations of RFID readers, the mathematical model of the staged installation of such readers has developed depending on the non-uniformity value of rail traffic volumes, passing through the specific railway hauls. As a result of that approach, installation of the numerous RFID readers at all station tracks and loading areas of industrial railway stations might be not necessary,which reduces the total cost of the rolling stock identification and the implementation of the method for optimal management of transportation process.

  14. Rapid Sampling of Hydrogen Bond Networks for Computational Protein Design.

    Science.gov (United States)

    Maguire, Jack B; Boyken, Scott E; Baker, David; Kuhlman, Brian

    2018-05-08

    Hydrogen bond networks play a critical role in determining the stability and specificity of biomolecular complexes, and the ability to design such networks is important for engineering novel structures, interactions, and enzymes. One key feature of hydrogen bond networks that makes them difficult to rationally engineer is that they are highly cooperative and are not energetically favorable until the hydrogen bonding potential has been satisfied for all buried polar groups in the network. Existing computational methods for protein design are ill-equipped for creating these highly cooperative networks because they rely on energy functions and sampling strategies that are focused on pairwise interactions. To enable the design of complex hydrogen bond networks, we have developed a new sampling protocol in the molecular modeling program Rosetta that explicitly searches for sets of amino acid mutations that can form self-contained hydrogen bond networks. For a given set of designable residues, the protocol often identifies many alternative sets of mutations/networks, and we show that it can readily be applied to large sets of residues at protein-protein interfaces or in the interior of proteins. The protocol builds on a recently developed method in Rosetta for designing hydrogen bond networks that has been experimentally validated for small symmetric systems but was not extensible to many larger protein structures and complexes. The sampling protocol we describe here not only recapitulates previously validated designs with performance improvements but also yields viable hydrogen bond networks for cases where the previous method fails, such as the design of large, asymmetric interfaces relevant to engineering protein-based therapeutics.

  15. RFID/RTLS Application to Remanufacturing Operations in the US Department of Defense

    OpenAIRE

    Ferrer, Geraldo; Dew, Nicholas

    2008-01-01

    Sponsored Report (for Acquisition Research Program) The most efficient use of the DoD''s network of remanufacturing depots is an important concern because of the extensive requirement to recapitalize the military equipment used in Iraq and Afghanistan through product recovery. In this report, we consider the use of radio frequency identification (RFID) technology in improving remanufacturing efficiency. We first provide a framework for understanding the choice between permanently tagging...

  16. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy

    2012-01-01

    for revenue and transshipment of cargo along with in/decrease of vessel- and operational cost for the current solution. The evaluation functions may be used by heuristics in general to evaluate changes to a network design without solving a large scale multicommodity flow problem.......We present a matheuristic, an integer programming based heuristic, for the Liner Shipping Network Design Problem. The heuristic applies a greedy construction heuristic based on an interpretation of the liner shipping network design problem as a multiple quadratic knapsack problem. The construction...

  17. Service network design of bike sharing systems analysis and optimization

    CERN Document Server

    Vogel, Patrick

    2016-01-01

    This monograph presents a tactical planning approach for service network design in metropolitan areas. Designing the service network requires the suitable aggregation of demand data as well as the anticipation of operational relocation decisions. To this end, an integrated approach of data analysis and mathematical optimization is introduced. The book also includes a case study based on real-world data to demonstrate the benefit of the proposed service network design approach. The target audience comprises primarily research experts in the field of traffic engineering, but the book may also be beneficial for graduate students.

  18. Designing communication and remote controlling of virtual instrument network system

    Science.gov (United States)

    Lei, Lin; Wang, Houjun; Zhou, Xue; Zhou, Wenjian

    2005-01-01

    In this paper, a virtual instrument network through the LAN and finally remote control of virtual instruments is realized based on virtual instrument and LabWindows/CVI software platform. The virtual instrument network system is made up of three subsystems. There are server subsystem, telnet client subsystem and local instrument control subsystem. This paper introduced virtual instrument network structure in detail based on LabWindows. Application procedure design of virtual instrument network communication, the Client/the programming mode of the server, remote PC and server communication far realizing, the control power of the workstation is transmitted, server program and so on essential technical were introduced. And virtual instruments network may connect to entire Internet on. Above-mentioned technology, through measuring the application in the electronic measurement virtual instrument network that is already built up, has verified the actual using value of the technology. Experiment and application validate that this design is resultful.

  19. Designing communication and remote controlling of virtual instrument network system

    International Nuclear Information System (INIS)

    Lei Lin; Wang Houjun; Zhou Xue; Zhou Wenjian

    2005-01-01

    In this paper, a virtual instrument network through the LAN and finally remote control of virtual instruments is realized based on virtual instrument and LabWindows/CVI software platform. The virtual instrument network system is made up of three subsystems. There are server subsystem, telnet client subsystem and local instrument control subsystem. This paper introduced virtual instrument network structure in detail based on LabWindows. Application procedure design of virtual instrument network communication, the Client/the programming mode of the server, remote PC and server communication far realizing, the control power of the workstation is transmitted, server program and so on essential technical were introduced. And virtual instruments network may connect to entire Internet on. Above-mentioned technology, through measuring the application in the electronic measurement virtual instrument network that is already built up, has verified the actual using value of the technology. Experiment and application validate that this design is resultful

  20. Applications of RFID into Nuclear Power Plant Maintenance System

    International Nuclear Information System (INIS)

    Lee, Seung Min; Seong, Poong Hyun

    2008-01-01

    RFID (Radio Frequency Identification) system, one of the most anticipated ubiquitous technologies is an automatic identification method using devices called RFID tags. RFID antenna detects each approach of RFID tags and recognizes the tags' ID and transfer to reader to do information processing. Since first introduced in the logistics industry, production management and maintenance organization in various fields of domestic and foreign enterprises introduce the RFID. Nuclear power plants are also using RFID to manage materials lately. However, the current status on the use of RFID is just a little more advanced on the use of bar code. Therefore, it seems that the important characteristic of RFID is not enough actualized to keep seeing. In point of Maintenance Information Field based on ubiquitous technology, the most important concept is real-time information processing. And RFID is quite proper to develop this information field system because it satisfies for the matter of that concept. The leading content in ubiquitous maintenance system is that maintenance personnel can get information what he needs and he can also transfer information what he gets whenever and wherever he is. In this paper, some examples of applying RFID in development of ubiquitous maintenance system are suggested

  1. Radio frequency identification and time-driven activity based costing:RFID-TDABC application in warehousing

    OpenAIRE

    Bahr, Witold; Price, Brian J

    2016-01-01

    Purpose: This paper extends the use of Radio Frequency Identification (RFID) data for accounting of warehouse costs and services. Time Driven Activity Based Costing (TDABC) methodology is enhanced with the real-time collected RFID data about duration of warehouse activities. This allows warehouse managers to have accurate and instant calculations of costs. The RFID enhanced TDABC (RFID-TDABC) is proposed as a novel application of the RFID technology. Research Approach: Application of RFID-TDA...

  2. Problems in the design of multifunction meteor-radar networks

    Science.gov (United States)

    Nechitailenko, V. A.; Voloshchuk, Iu. I.

    The design of meteor-radar networks is examined in connection with the need to conduct experiments on a mass scale in meteor geophysics and astronomy. Attention is given to network architecture features and procedures of communication-path selection in the organization of information transfer, with allowance for the features of the meteor communication link. The meteor link is considered as the main means to ensure traffic in the meteor-radar network.

  3. Design considerations for energy efficient, resilient, multi-layer networks

    DEFF Research Database (Denmark)

    Fagertun, Anna Manolova; Hansen, Line Pyndt; Ruepp, Sarah Renée

    2016-01-01

    measures. In this complex problem, considerations such as client traffic granularity, applied grooming policies and multi-layer resiliency add even more complexity. A commercially available network planning tool is used to investigate the interplay between different methods for resilient capacity planning......This work investigates different network design considerations with respect to energy-efficiency, under green-field resilient multi-layer network deployment. The problem of energy efficient, reliable multi-layer network design is known to result in different trade-offs between key performance....... Switching off low-utilized transport links has been investigated via a pro-active re-routing applied during the network planning. Our analysis shows that design factors such as the applied survivability strategy and the applied planning method have higher impact on the key performance indicators compared...

  4. Information Systems at Enterprise. Design of Secure Network of Enterprise

    Science.gov (United States)

    Saigushev, N. Y.; Mikhailova, U. V.; Vedeneeva, O. A.; Tsaran, A. A.

    2018-05-01

    No enterprise and company can do without designing its own corporate network in today's information society. It accelerates and facilitates the work of employees at any level, but contains a big threat to confidential information of the company. In addition to the data theft attackers, there are plenty of information threats posed by modern malware effects. In this regard, the computational security of corporate networks is an important component of modern information technologies of computer security for any enterprise. This article says about the design of the protected corporate network of the enterprise that provides the computers on the network access to the Internet, as well interoperability with the branch. The access speed to the Internet at a high level is provided through the use of high-speed access channels and load balancing between devices. The security of the designed network is performed through the use of VLAN technology as well as access lists and AAA server.

  5. Rational design of functional and tunable oscillating enzymatic networks

    Science.gov (United States)

    Semenov, Sergey N.; Wong, Albert S. Y.; van der Made, R. Martijn; Postma, Sjoerd G. J.; Groen, Joost; van Roekel, Hendrik W. H.; de Greef, Tom F. A.; Huck, Wilhelm T. S.

    2015-02-01

    Life is sustained by complex systems operating far from equilibrium and consisting of a multitude of enzymatic reaction networks. The operating principles of biology's regulatory networks are known, but the in vitro assembly of out-of-equilibrium enzymatic reaction networks has proved challenging, limiting the development of synthetic systems showing autonomous behaviour. Here, we present a strategy for the rational design of programmable functional reaction networks that exhibit dynamic behaviour. We demonstrate that a network built around autoactivation and delayed negative feedback of the enzyme trypsin is capable of producing sustained oscillating concentrations of active trypsin for over 65 h. Other functions, such as amplification, analog-to-digital conversion and periodic control over equilibrium systems, are obtained by linking multiple network modules in microfluidic flow reactors. The methodology developed here provides a general framework to construct dissipative, tunable and robust (bio)chemical reaction networks.

  6. Designing Networked Adaptive Interactive Hybrid Systems

    NARCIS (Netherlands)

    Kester, L.J.H.M.

    2008-01-01

    Advances in network technologies enable distributed systems, operating in complex physical environments, to coordinate their activities over larger areas within shorter time intervals. In these systems humans and intelligent machines will, in close interaction, be able to reach their goals under

  7. A Network Design Approach to Countering Terrorism

    Science.gov (United States)

    2015-09-01

    2003). More and more scale-free networks have been discovered. How can such diverse systems have the same architecture and properties? Part of the...Rabei Ousmane Sayed Ahmed (a.k.a. the Egyptian ) convinced the group to pursuit jihad at home, where they had the material resources to act (Atran, 2010

  8. Ecological networks and greenways; concept, design, implementation

    NARCIS (Netherlands)

    Jongman, R.H.G.; Pungetti, G.

    2004-01-01

    The establishment of ecological networks in Europe and greenways in America has required some of the most advanced applications of the principles of landscape ecology to land use planning. This book provides a thorough overview of recent developments in this emerging field, combining theoretical

  9. Analysis and Design of Complex Networks

    Science.gov (United States)

    2014-12-02

    systems. 08-NOV-10, . : , Barlas Oguz, Venkat Anantharam. Long range dependent Markov chains with applications , Information Theory and Applications ...JUL-12, . : , Michael Krishnan, Ehsan Haghani, Avideh Zakhor. Packet Length Adaptation in WLANs with Hidden Nodes and Time-Varying Channels, IEEE... WLAN networks with multi-antenna beam-forming nodes. VII. Use of busy/idle signals for discovering optimum AP association VIII

  10. DESIGNING OF AN AUTOMOBILE FLEET NETWORK

    Directory of Open Access Journals (Sweden)

    R. B. Ivut

    2016-01-01

    Full Text Available Investment volume is considered as an important factor in regional development under current conditions. Logistical infrastructure which ensures a complex transport, distributive, information and other services exerts a significant influence on regional investment attractiveness. Lack of clear vision on development and execution of development strategy for logistics infrastructure from the side of regional authorities results in unwillingness of large federal and transnational companies to provide investments in infrastructure projects. Network of automotive transport terminals is one of the main elements in logistics infrastructure. The network allows to optimize a flow of material goods from the point of their origin to the point of their consumption with the lowest possible costs and the required level of service. Automobile transport is one of the main objects of transport infrastructure and it is characterized by rather high flexibility in comparison with other types of transport facilities that preconditions its widespread application. Network of automobile fleets (terminals has been formed for redistribution of goods traffic within the concerned regions. The purpose of the present research is to develop a mathematical model for formation of transport infrastructure on the territory of regions. The paper proposes an approach for formation of automobile fleet (terminal network on the territory of a large region with due account of the established network of distribution and sorting-out warehouse facilities. A model has been developed for solving the problem pertaining to minimization of aggregate costs related to maintenance of automobile fleets, delivery of goods to and from distribution and sorting-out warehouse facilities to consumers, ferry of empty trucks and goods handling. The model makes it possible to determine optimal number and location area of automobile fleets (terminals while accounting for their possible locations, capacity

  11. Radio Frequency Identification (RFID) in Space

    Science.gov (United States)

    Bacon, John B.

    2011-01-01

    The ISS has some significant inventory management challenges. RFID solves many of these, and was deployed 8/2011. Significant issues (some unique to spacecraft) remain. NASA is interested and investing in technologies that will help to overcome the remaining issues.

  12. Jamming protection of spread spectrum RFID system

    Science.gov (United States)

    Mazurek, Gustaw

    2006-10-01

    This paper presents a new transform-domain processing algorithm for rejection of narrowband interferences in RFID/DS-CDMA systems. The performance of the proposed algorithm has been verified via computer simulations. Implementation issues have been discussed. The algorithm can be implemented in the FPGA or DSP technology.

  13. RFID security : cryptography and physics perspectives

    NARCIS (Netherlands)

    Guajardo, J.; Tuyls, P.T.; Bird, N.; Conrado, C.; Maubach, S.; Schrijen, G.J.; Skoric, B.; Tombeur, A.M.H.; Thueringer, P.; Kitsos, P.; Zhang, Y.

    2008-01-01

    In this chapter, we provide an overview of mechanisms that are cheap to implement or integrate into RFID tags and that at the same time enhance their security and privacy properties. We emphasize solutions that make use of existing (or expected) functionality on the tag or that are inherently cheap

  14. Teaching Management System with Applications of RFID and IoT Technology

    Directory of Open Access Journals (Sweden)

    Ping Tan

    2018-02-01

    Full Text Available Currently, Internet of Things (IoT technologies are used in many areas, such as intelligent transportation, smart city, hospital, games, education. Earlier interactive response system uses infrared or radio frequency (RF wireless communication technologies to transmit the students’ answer to teachers’ managerment system, where there exists high cost, inconvenient usage, difficult deployment. How to use IoT to improve the quality of higher education becomes a very important topic in the researh area of teaching. Radio Frequency Identification (RFID is one of key technologies to implement IoT applications, and most of universities use the High Frequency (HF RFID card as the students’ identification devices in China. In this paper, a kind of WiFi supported RFID reader (WiRF is implemented using open source hardware platforms, such as Node MCU and RFID-RC522. Then the proposed WiRF system is used to assist teacher to perform automatic attendance record and students’ behavior record. In addition, Quick Response (QR code is another technology to enable IoT. In this paper, QR code is designed to quickly access course video and perform real-time interactive response in the classroom, which will provide multidimensional learning and strengthen the motivation of students’ learning. This IoT system can improve the attendance of students, and give a positive impact on students’ learning process for higher education.

  15. SCRMS: An RFID and Sensor Web-Enabled Smart Cultural Relics Management System.

    Science.gov (United States)

    Xiao, Changjiang; Chen, Nengcheng; Li, Dandan; Lv, You; Gong, Jianya

    2016-12-30

    Cultural relics represent national or even global resources of inestimable value. How to efficiently manage and preserve these cultural relics is a vitally important issue. To achieve this goal, this study proposed, designed, and implemented an RFID and Sensor Web-enabled smart cultural relics management system (SCRMS). In this system, active photovoltaic subtle energy-powered Radio Frequency Identification (RFID) is used for long-range contactless identification and lifecycle management of cultural relics during their storage and circulation. In addition, different types of ambient sensors are integrated with the RFID tags and deployed around cultural relics to monitor their environmental parameters, helping to ensure that they remain in good condition. An Android-based smart mobile application, as middleware, is used in collaboration with RFID readers to collect information and provide convenient management for the circulation of cultural relics. Moreover, multiple sensing techniques are taken advantage of simultaneously for preservation of cultural relics. The proposed system was successfully applied to a museum in the Yongding District, Fujian Province, China, demonstrating its feasibility and advantages for smart and efficient management and preservation of cultural relics.

  16. Experimental assessment of an RFID-based crack sensor for steel structures

    Science.gov (United States)

    E Martínez-Castro, R.; Jang, S.; Nicholas, J.; Bansal, R.

    2017-08-01

    The use of welded steel cover plates had been a common design practice to increase beam section capacity in regions of high moment for decades. Many steel girder bridges with cover plates are still in service. Steel girder bridges are subject to cyclic loading, which can initiate crack formation at the toe of the weld and reduce beam capacity. Thus, timely detection of fatigue cracks is of utmost importance in steel girder bridge monitoring. To date, crack monitoring methods using in-house radio frequency identification (RFID)-based sensors have been developed to complement visual inspection and provide quantitative information of damage level. Offering similar properties at a reduced cost, commercial ultra-high frequency (UHF) passive RFID tags have been identified as a more financially viable option for pervasive crack monitoring using a dense array of sensors. This paper presents a study on damage sensitivity of low-cost commercial UHF RFID tags for crack detection and monitoring on metallic structures. Using backscatter power as a parameter for damage identification, a crack sensing system has been developed for single and multiple tag configurations for increased sensing pervasiveness. The effect on backscatter power of the existence and stage of crack propagation has been successfully characterized. For further automation of crack detection, a damage index based on the variation of backscatter power has also been established. The tested commercial RFID-based crack sensor contributes to the usage of this technology on steel girder bridges.

  17. ASAP: A MAC Protocol for Dense and Time-Constrained RFID Systems

    Directory of Open Access Journals (Sweden)

    Kyounghwan Lee

    2007-08-01

    Full Text Available We introduce a novel medium access control (MAC protocol for radio frequency identification (RFID systems which exploits the statistical information collected at the reader. The protocol, termed adaptive slotted ALOHA protocol (ASAP, is motivated by the need to significantly improve the total read time performance of the currently suggested MAC protocols for RFID systems. In order to accomplish this task, ASAP estimates the dynamic tag population and adapts the frame size in the subsequent round via a simple policy that maximizes an appropriately defined efficiency function. We demonstrate that ASAP provides significant improvement in total read time performance over the current RFID MAC protocols. We next extend the design to accomplish reliable performance of ASAP in realistic scenarios such as the existence of constraints on frame size, and mobile RFID systems where tags move at constant velocity in the reader's field. We also consider the case where tags may fail to respond because of a physical breakdown or a temporary malfunction, and show the robustness in those scenarios as well.

  18. SCRMS: An RFID and Sensor Web-Enabled Smart Cultural Relics Management System

    Directory of Open Access Journals (Sweden)

    Changjiang Xiao

    2016-12-01

    Full Text Available Cultural relics represent national or even global resources of inestimable value. How to efficiently manage and preserve these cultural relics is a vitally important issue. To achieve this goal, this study proposed, designed, and implemented an RFID and Sensor Web–enabled smart cultural relics management system (SCRMS. In this system, active photovoltaic subtle energy-powered Radio Frequency Identification (RFID is used for long-range contactless identification and lifecycle management of cultural relics during their storage and circulation. In addition, different types of ambient sensors are integrated with the RFID tags and deployed around cultural relics to monitor their environmental parameters, helping to ensure that they remain in good condition. An Android-based smart mobile application, as middleware, is used in collaboration with RFID readers to collect information and provide convenient management for the circulation of cultural relics. Moreover, multiple sensing techniques are taken advantage of simultaneously for preservation of cultural relics. The proposed system was successfully applied to a museum in the Yongding District, Fujian Province, China, demonstrating its feasibility and advantages for smart and efficient management and preservation of cultural relics.

  19. ISO 15693-compatible high frequency passive RFID transponder with mixed-signal ESD protection circuit

    International Nuclear Information System (INIS)

    Khaw, M.K.; Mohd-Yasin, F.; Reaz, M.B.I.

    2009-06-01

    Radio Frequency Identification (RFID) tags have long been in existence since the 1950's. But not until two decades ago have they found important usage in areas where the need for enhanced and secured data handling is highly concerned. For example, RFID tags are embedded with passports in countries like US and Malaysia since the September 11th incident. RFID tag used in smart card such as passport is constantly exposed to a lot of human touches, thus requiring a very good Electrostatic Discharge (ESD) protection. Normally the protection is done at the pad level, but the protection is usually small dimensioned to reduce input capacitance. Therefore, in advanced process with thinner gate oxide, internal protection is necessary. This work presents the design of an ISO 15693-compatible 13.56 MHz passive RFID tag with internal ESD protection. VDD-to-ground ESD clamp circuits are strategically placed in the chip architecture. Each clamp has a capability to sustain 2-KV Human Body Model (HBM) positive mode ESD voltage, to produce robust tag. The protection circuit adds 15.12nW to the total power consumption, which is very minimal. (author)

  20. An Optimal Design Model for New Water Distribution Networks in ...

    African Journals Online (AJOL)

    The mathematical formulation is a Linear Programming Problem (LPP) which involves the design of a new network of water distribution considering the cost in the form of unit price of pipes, the hydraulic gradient and the loss of pressure. The objective function minimizes the cost of the network which is computed as the sum ...

  1. Multimodal network design for sustainable household plastic recycling

    NARCIS (Netherlands)

    Bing Xiaoyun, Xiaoyun; Groot, J.J.; Bloemhof, J.M.; Vorst, van der J.G.A.J.

    2013-01-01

    Purpose – This research studies a plastic recycling system from a reverse logistics angle and investigates the potential benefits of a multimodality strategy to the network design of plastic recycling. This research aims to quantify the impact of multimodality on the network, to provide decision

  2. Liner shipping hub network design in a competitive environment

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan; Pisinger, David

    2010-01-01

    A mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses the competition between a newcomer liner service provider and an existing dominating operator, both operating on hub-and-spoke networks. The newcomer company maximizes i...

  3. A Computational Architecture Based on RFID Sensors for Traceability in Smart Cities

    Science.gov (United States)

    Mora-Mora, Higinio; Gilart-Iglesias, Virgilio; Gil, David; Sirvent-Llamas, Alejandro

    2015-01-01

    Information Technology and Communications (ICT) is presented as the main element in order to achieve more efficient and sustainable city resource management, while making sure that the needs of the citizens to improve their quality of life are satisfied. A key element will be the creation of new systems that allow the acquisition of context information, automatically and transparently, in order to provide it to decision support systems. In this paper, we present a novel distributed system for obtaining, representing and providing the flow and movement of people in densely populated geographical areas. In order to accomplish these tasks, we propose the design of a smart sensor network based on RFID communication technologies, reliability patterns and integration techniques. Contrary to other proposals, this system represents a comprehensive solution that permits the acquisition of user information in a transparent and reliable way in a non-controlled and heterogeneous environment. This knowledge will be useful in moving towards the design of smart cities in which decision support on transport strategies, business evaluation or initiatives in the tourism sector will be supported by real relevant information. As a final result, a case study will be presented which will allow the validation of the proposal. PMID:26067195

  4. A Computational Architecture Based on RFID Sensors for Traceability in Smart Cities

    Directory of Open Access Journals (Sweden)

    Higinio Mora-Mora

    2015-06-01

    Full Text Available Information Technology and Communications (ICT is presented as the main element in order to achieve more efficient and sustainable city resource management, while making sure that the needs of the citizens to improve their quality of life are satisfied. A key element will be the creation of new systems that allow the acquisition of context information, automatically and transparently, in order to provide it to decision support systems. In this paper, we present a novel distributed system for obtaining, representing and providing the flow and movement of people in densely populated geographical areas. In order to accomplish these tasks, we propose the design of a smart sensor network based on RFID communication technologies, reliability patterns and integration techniques. Contrary to other proposals, this system represents a comprehensive solution that permits the acquisition of user information in a transparent and reliable way in a non-controlled and heterogeneous environment. This knowledge will be useful in moving towards the design of smart cities in which decision support on transport strategies, business evaluation or initiatives in the tourism sector will be supported by real relevant information. As a final result, a case study will be presented which will allow the validation of the proposal.

  5. A Computational Architecture Based on RFID Sensors for Traceability in Smart Cities.

    Science.gov (United States)

    Mora-Mora, Higinio; Gilart-Iglesias, Virgilio; Gil, David; Sirvent-Llamas, Alejandro

    2015-06-10

    Information Technology and Communications (ICT) is presented as the main element in order to achieve more efficient and sustainable city resource management, while making sure that the needs of the citizens to improve their quality of life are satisfied. A key element will be the creation of new systems that allow the acquisition of context information, automatically and transparently, in order to provide it to decision support systems. In this paper, we present a novel distributed system for obtaining, representing and providing the flow and movement of people in densely populated geographical areas. In order to accomplish these tasks, we propose the design of a smart sensor network based on RFID communication technologies, reliability patterns and integration techniques. Contrary to other proposals, this system represents a comprehensive solution that permits the acquisition of user information in a transparent and reliable way in a non-controlled and heterogeneous environment. This knowledge will be useful in moving towards the design of smart cities in which decision support on transport strategies, business evaluation or initiatives in the tourism sector will be supported by real relevant information. As a final result, a case study will be presented which will allow the validation of the proposal.

  6. Architectural Design for the Global Legal Information Network

    Science.gov (United States)

    Kalpakis, Konstantinos

    1999-01-01

    In this report, we provide a summary of our activities regarding the goals, requirements analysis, design, and prototype implementation for the Global Legal Information Network, a joint effort between the Law Library of Congress and NASA.

  7. Journal of EEA, Vol. 28, 2011 SUPPLY CHAIN NETWORK DESIGN ...

    African Journals Online (AJOL)

    Zede

    study. Keywords: Supply Chain Network Design,. Mathematical Model, Optimization ... Share Company for case analysis. ... demands at different regions and the customer ... sustain growth. ..... The capital city, Addis Ababa and the surrounding.

  8. WDM Systems and Networks Modeling, Simulation, Design and Engineering

    CERN Document Server

    Ellinas, Georgios; Roudas, Ioannis

    2012-01-01

    WDM Systems and Networks: Modeling, Simulation, Design and Engineering provides readers with the basic skills, concepts, and design techniques used to begin design and engineering of optical communication systems and networks at various layers. The latest semi-analytical system simulation techniques are applied to optical WDM systems and networks, and a review of the various current areas of optical communications is presented. Simulation is mixed with experimental verification and engineering to present the industry as well as state-of-the-art research. This contributed volume is divided into three parts, accommodating different readers interested in various types of networks and applications. The first part of the book presents modeling approaches and simulation tools mainly for the physical layer including transmission effects, devices, subsystems, and systems), whereas the second part features more engineering/design issues for various types of optical systems including ULH, access, and in-building system...

  9. Designing Resource-Bounded Reasoners using Bayesian Networks

    Data.gov (United States)

    National Aeronautics and Space Administration — In this work we are concerned with the conceptual design of large-scale diagnostic and health management systems that use Bayesian networks. While they are...

  10. Design of Network Architectures: Role of Game Theory and Economics

    OpenAIRE

    Shetty, Nikhil

    2010-01-01

    The economics of the market that a network architecture enables has a important bearing on its success and eventual adoption. Some of these economic issues are tightly coupled with the design of the network architecture. A poor design could end up making certain markets very difficult to enable, even if they are in the better interest of society. Theanalysis of these cross-disciplinary problems requires understanding both the technology and the economic aspects. This thesis introduces three m...

  11. A new laboratory radio frequency identification (RFID) system for behavioural tracking of marine organisms.

    Science.gov (United States)

    Aguzzi, Jacopo; Sbragaglia, Valerio; Sarriá, David; García, José Antonio; Costa, Corrado; del Río, Joaquín; Mànuel, Antoni; Menesatti, Paolo; Sardà, Francesc

    2011-01-01

    Radio frequency identification (RFID) devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.). The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops' grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals' behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark), measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest.

  12. A New Laboratory Radio Frequency Identification (RFID) System for Behavioural Tracking of Marine Organisms

    Science.gov (United States)

    Aguzzi, Jacopo; Sbragaglia, Valerio; Sarriá, David; García, José Antonio; Costa, Corrado; del Río, Joaquín; Mànuel, Antoni; Menesatti, Paolo; Sardà, Francesc

    2011-01-01

    Radio frequency identification (RFID) devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.). The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops’ grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals’ behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark), measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest. PMID:22163710

  13. A New Laboratory Radio Frequency Identification (RFID System for Behavioural Tracking of Marine Organisms

    Directory of Open Access Journals (Sweden)

    Francesc Sardà

    2011-10-01

    Full Text Available Radio frequency identification (RFID devices are currently used to quantify several traits of animal behaviour with potential applications for the study of marine organisms. To date, behavioural studies with marine organisms are rare because of the technical difficulty of propagating radio waves within the saltwater medium. We present a novel RFID tracking system to study the burrowing behaviour of a valuable fishery resource, the Norway lobster (Nephrops norvegicus L.. The system consists of a network of six controllers, each handling a group of seven antennas. That network was placed below a microcosm tank that recreated important features typical of Nephrops’ grounds, such as the presence of multiple burrows. The animals carried a passive transponder attached to their telson, operating at 13.56 MHz. The tracking system was implemented to concurrently report the behaviour of up to three individuals, in terms of their travelled distances in a specified unit of time and their preferential positioning within the antenna network. To do so, the controllers worked in parallel to send the antenna data to a computer via a USB connection. The tracking accuracy of the system was evaluated by concurrently recording the animals’ behaviour with automated video imaging. During the two experiments, each lasting approximately one week, two different groups of three animals each showed a variable burrow occupancy and a nocturnal displacement under a standard photoperiod regime (12 h light:12 h dark, measured using the RFID method. Similar results were obtained with the video imaging. Our implemented RFID system was therefore capable of efficiently tracking the tested organisms and has a good potential for use on a wide variety of other marine organisms of commercial, aquaculture, and ecological interest.

  14. Network Design for Container Shipping Using Cutting Planes

    DEFF Research Database (Denmark)

    The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing the ov...... the fact that the route of a ship allows for subtours, we introduce the concept of pseudo-simple routes. To solve the problem we use a branch and cut solution method using clover and capacity cuts we defined for the problem.......The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing...... the overall cost. The real-life container shipping network design problem differs in several ways from the standard network design problem. Examples of these differences are the cyclic routes of vessels and the fact that a route is continuously sailed for a given forecast period. To model these real...

  15. RFID Continuance Usage Intention in Health Care Industry.

    Science.gov (United States)

    Iranmanesh, Mohammad; Zailani, Suhaiza; Nikbin, Davoud

    Radio-frequency identification (RFID) has been proved to be an effective tool both for improving operational efficiency and for gaining competitive advantage in the health care industry despite its relatively low-usage rate in hospitals. The sustained use of RFID by health care professionals will promote its development in the long term. This study evaluates the acceptance continuance of RFID among health care professionals through technology continuance theory (TCT). Data were collected from 178 medical professionals in Malaysia and were then analyzed using the partial least squares technique. The analysis showed that the TCT model provided not only a thorough understanding of the continuance behavior of health care professionals toward RFID but also the attitudes, satisfaction, and perceived usefulness of professionals toward it. The results of this study are expected to assist policy makers and managers in the health care industry in implementing the RFID technology in hospitals by understanding the determinants of continuance of RFID usage intention.

  16. Enhancing Business Process Automation by Integrating RFID Data and Events

    Science.gov (United States)

    Zhao, Xiaohui; Liu, Chengfei; Lin, Tao

    Business process automation is one of the major benefits for utilising Radio Frequency Identification (RFID) technology. Through readers to RFID middleware systems, the information and the movements of tagged objects can be used to trigger business transactions. These features change the way of business applications for dealing with the physical world from mostly quantity-based to object-based. Aiming to facilitate business process automation, this paper introduces a new method to model and incorporate business logics into RFID edge systems from an object-oriented perspective with emphasises on RFID's event-driven characteristics. A framework covering business rule modelling, event handling and system operation invocations is presented on the basis of the event calculus. In regard to the identified delayed effects in RFID-enabled applications, a two-block buffering mechanism is proposed to improve RFID query efficiency within the framework. The performance improvements are analysed with related experiments.

  17. RFID - based Staff Control System (SCS) in Kazakhstan

    Science.gov (United States)

    Saparkhojayev, N.

    2015-06-01

    RFID - based Staff Control System (SCS) will allow complete hands-free access control, monitoring the whereabouts of employee and record the attendance of the employee as well. Moreover, with a help of this system, it is possible to have a nice report at the end of the month and based on the total number of worked hours, the salary will be allocated to each personnel. The access tag can be read up to 10 centimeters from the RFID reader. The proposed system is based on UHF RFID readers, supported with antennas at gate and transaction sections, and employee identification cards containing RFID-transponders which are able to electronically store information that can be read / written even without the physical contact with the help of radio medium. This system is an innovative system, which describes the benefits of applying RFID- technology in the Education System process of Republic of Kazakhstan. This paper presents the experiments conducted to set up RFID based SCS.

  18. A Framework for RFID Survivability Requirement Analysis and Specification

    Science.gov (United States)

    Zuo, Yanjun; Pimple, Malvika; Lande, Suhas

    Many industries are becoming dependent on Radio Frequency Identification (RFID) technology for inventory management and asset tracking. The data collected about tagged objects though RFID is used in various high level business operations. The RFID system should hence be highly available, reliable, and dependable and secure. In addition, this system should be able to resist attacks and perform recovery in case of security incidents. Together these requirements give rise to the notion of a survivable RFID system. The main goal of this paper is to analyze and specify the requirements for an RFID system to become survivable. These requirements, if utilized, can assist the system in resisting against devastating attacks and recovering quickly from damages. This paper proposes the techniques and approaches for RFID survivability requirements analysis and specification. From the perspective of system acquisition and engineering, survivability requirement is the important first step in survivability specification, compliance formulation, and proof verification.

  19. The RFID-Based Manufacturing and Inventory Revolution

    Institute of Scientific and Technical Information of China (English)

    HAMIDULLHKhanNiazi; SUNHou-fang; RIAZAhmed; SHAHIDIkramullahButt

    2005-01-01

    Radio frequency identification (RFID) is a contactless form of automatic identification and data capture (AIDC) technology. This paper explores the use of RFID in the new field of manufacturing automation and quality control. This paper consists of five parts. The first part gives a brief background and introduction of technology. The proposed use of RFID technology in the field of manufacturing automation and quality control is discussed in second part. The third part covers its use in the field of warehouse management system. Part four is a local review and analysis of RFID technology in manufacturing and warehousing which would support the potential use of this technology locally at China. The last part of paper gives concluding remarks about the RFID technology with recommendations of RFID use in these areas.

  20. A Novel Optical Sensor Platform Designed for Wireless Sensor Networks

    International Nuclear Information System (INIS)

    Yang, Shuo; Zhou, Bochao; Sun, Tong; Grattan, Kenneth T V

    2013-01-01

    This paper presents a novel design of an optical sensor platform, enabling effective integration of a number of optical fibre ('wired') sensors with wireless sensor networks (WSNs). In this work, a fibre Bragg grating-based temperature sensor with low power consumption is specially designed as a sensing module and integrated successfully into a WSN, making full use of the advantages arising from both the advanced optical sensor designs and the powerful network functionalities resident in WSNs. The platform is expected to make an important impact on many applications, where either the conventional optical sensor designs or WSNs alone cannot meet the requirements.

  1. The design of nuclear radiation measuring instrument of embedded network

    International Nuclear Information System (INIS)

    Zhang Huaiqiang; Ge Liangquan; Xiong Shengqing

    2009-01-01

    The design and realization of nuclear radiation measuring instrument is introduced. Due to the current nuclear instrument often used serial interface to communicate the PC, it is widely used for simple design and easy operation. However, as the demand of remote data acquisition and the call of sharing resources, the design of embedded the TCP/IP protocol stack into MCU, it may send the nuclear signal in Internet. Some devices that link each other with the network can be networked. The design is not only realizing remote data acquisition and sharing resources, but also reducing costs and improving the maintainability of the system. (authors)

  2. Design of a Networked Learning Master Environment for Professionals

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2010-01-01

    The paper is presenting the overall learning design of MIL (Master in ICT and Learning). The learning design is integrating a number of principles: 1. Principles of problem and project based learning 2. Networked learning / learning in communities of practice. The paper will discuss how these pri......The paper is presenting the overall learning design of MIL (Master in ICT and Learning). The learning design is integrating a number of principles: 1. Principles of problem and project based learning 2. Networked learning / learning in communities of practice. The paper will discuss how...

  3. Broadcast design in cognitive radio ad hoc networks

    CERN Document Server

    Song, Yi

    2014-01-01

    This SpringerBrief investigates the special challenges of broadcast design in cognitive radio (CR) ad hoc networks. It introduces two broadcast protocols in CR ad hoc networks: a quality-of-service based broadcast protocol under blind information and a fully-distributed broadcast protocol with collision avoidance. A novel unified analytical model is also presented to analyze the performance of the broadcast protocols. This is the first book dedicated to the unique broadcast design challenges in CR ad hoc networks. The authors also discuss the recent research on the performance analysis of broa

  4. Liner Shipping Hub Network Design in a Competitive Environment

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan; Pisinger, David

    A new mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses competition between a newcomer liner service provider and an alliance, both operating on hub-and-spoke networks. The newcomer company maximizes its market share...... — proportional to service time and transportation cost —by locating a predefined number of hubs at candidate ports and designing its network. While general-purpose solvers do not solve instances of even small size, an accelerated lagrangian method coupled with a primal heuristic obtains very good bounds. Our...

  5. The architectural design of networks of protein domain architectures.

    Science.gov (United States)

    Hsu, Chia-Hsin; Chen, Chien-Kuo; Hwang, Ming-Jing

    2013-08-23

    Protein domain architectures (PDAs), in which single domains are linked to form multiple-domain proteins, are a major molecular form used by evolution for the diversification of protein functions. However, the design principles of PDAs remain largely uninvestigated. In this study, we constructed networks to connect domain architectures that had grown out from the same single domain for every single domain in the Pfam-A database and found that there are three main distinctive types of these networks, which suggests that evolution can exploit PDAs in three different ways. Further analysis showed that these three different types of PDA networks are each adopted by different types of protein domains, although many networks exhibit the characteristics of more than one of the three types. Our results shed light on nature's blueprint for protein architecture and provide a framework for understanding architectural design from a network perspective.

  6. Optimal design of an IP/MPLS over DWDM network

    Directory of Open Access Journals (Sweden)

    Eduardo Canale

    2014-04-01

    Full Text Available Different approaches for deploying resilient optical networks of low cost constitute a traditional group of NP-Hard problems that have been widely studied. Most of them are based on the construction of low cost networks that fulfill connectivity constraints. However, recent trends to virtualize optical networks over the legacy fiber infrastructure, modified the nature of network design problems and turned inappropriate many of these models and algorithms. In this paper we study a design problem arising from the deployment of an IP/MPLS network over an existing DWDM infrastructure. Besides cost and resiliency, this problem integrates traffic and capacity constraints. We present: an integer programming formulation for the problem, theoretical results, and describe how several metaheuristics were applied in order to find good quality solutions, for a real application case of a telecommunications company.

  7. Resilience-based optimal design of water distribution network

    Science.gov (United States)

    Suribabu, C. R.

    2017-11-01

    Optimal design of water distribution network is generally aimed to minimize the capital cost of the investments on tanks, pipes, pumps, and other appurtenances. Minimizing the cost of pipes is usually considered as a prime objective as its proportion in capital cost of the water distribution system project is very high. However, minimizing the capital cost of the pipeline alone may result in economical network configuration, but it may not be a promising solution in terms of resilience point of view. Resilience of the water distribution network has been considered as one of the popular surrogate measures to address ability of network to withstand failure scenarios. To improve the resiliency of the network, the pipe network optimization can be performed with two objectives, namely minimizing the capital cost as first objective and maximizing resilience measure of the configuration as secondary objective. In the present work, these two objectives are combined as single objective and optimization problem is solved by differential evolution technique. The paper illustrates the procedure for normalizing the objective functions having distinct metrics. Two of the existing resilience indices and power efficiency are considered for optimal design of water distribution network. The proposed normalized objective function is found to be efficient under weighted method of handling multi-objective water distribution design problem. The numerical results of the design indicate the importance of sizing pipe telescopically along shortest path of flow to have enhanced resiliency indices.

  8. Designing synthetic networks in silico: a generalised evolutionary algorithm approach.

    Science.gov (United States)

    Smith, Robert W; van Sluijs, Bob; Fleck, Christian

    2017-12-02

    Evolution has led to the development of biological networks that are shaped by environmental signals. Elucidating, understanding and then reconstructing important network motifs is one of the principal aims of Systems & Synthetic Biology. Consequently, previous research has focused on finding optimal network structures and reaction rates that respond to pulses or produce stable oscillations. In this work we present a generalised in silico evolutionary algorithm that simultaneously finds network structures and reaction rates (genotypes) that can satisfy multiple defined objectives (phenotypes). The key step to our approach is to translate a schema/binary-based description of biological networks into systems of ordinary differential equations (ODEs). The ODEs can then be solved numerically to provide dynamic information about an evolved networks functionality. Initially we benchmark algorithm performance by finding optimal networks that can recapitulate concentration time-series data and perform parameter optimisation on oscillatory dynamics of the Repressilator. We go on to show the utility of our algorithm by finding new designs for robust synthetic oscillators, and by performing multi-objective optimisation to find a set of oscillators and feed-forward loops that are optimal at balancing different system properties. In sum, our results not only confirm and build on previous observations but we also provide new designs of synthetic oscillators for experimental construction. In this work we have presented and tested an evolutionary algorithm that can design a biological network to produce desired output. Given that previous designs of synthetic networks have been limited to subregions of network- and parameter-space, the use of our evolutionary optimisation algorithm will enable Synthetic Biologists to construct new systems with the potential to display a wider range of complex responses.

  9. Evaluation of Efficiency Improvement in Vital Documentation Using RFID Devices.

    Science.gov (United States)

    Kimura, Eizen; Nakai, Miho; Ishihara, Ken

    2016-01-01

    We introduced medical devices with RFID tags and the terminal with RFID reader in our hospital. Time study was conducted in two phases. In phase I, nurses round as usual, and in phase II, the nurse round the ward with a terminal installed on a cart. This study concluded that RFID system shortens the time for vital sign documentation. However, deploying the terminals at every bedside did not contribute the more time reduction.

  10. Radio Frequency Identification (RFID) technology and patient safety

    OpenAIRE

    Ajami, Sima; Rajabzadeh, Ahmad

    2013-01-01

    Background: Radio frequency identification (RFID) systems have been successfully applied in areas of manufacturing, supply chain, agriculture, transportation, healthcare, and services to name a few. However, the different advantages and disadvantages expressed in various studies of the challenges facing the technology of the use of the RFID technology have been met with skepticism by managers of healthcare organizations. The aim of this study was to express and display the role of RFID techno...

  11. The impact of RFID on management of returnable containers

    OpenAIRE

    Thoroe, Lars; Melski, Adam; Schumann, Matthias

    2009-01-01

    Inventory shrinkage is a common problem in the management of returnable containers. RFID-based container tracking systems have been proposed as a possible solution. Benefits of RFID-based tracking of returnable transport items such as pallets, kegs and boxes are documented in several case studies, but have so far hardly been analyzed from a theoretical perspective. In this article, we analyze the impact of RFID on container management using a deterministic inventory model. The analysis focuse...

  12. RFID Demystified: Part 2. Applications within the supply chain.

    OpenAIRE

    Wilding, Richard D.; Delgardo, Tiago

    2004-01-01

    In our previous article we discussed the technology, benefits and barriers to implementations of Radio Frequency Identification (RFID). In this article we discuss where this technology can be applied. Essentially, it is argued that RFID systems help companies to cut costs, improve customer service, reduce labour, increase accuracy and improve supply chain throughput. RFID systems applications can be used by different industry sectors like the military, retail, industrial, life sciences, logis...

  13. K-12 Local Network (LAN) Design Guide

    National Research Council Canada - National Science Library

    Horton, Cody

    1998-01-01

    ...) educators preparing to design and implement LANs in K-12 schools and libraries. Data was collected during the implementation of LANs in K-12 schools of the Monterey Peninsula Uniform School District (MPUSD...

  14. Self-repair networks a mechanism design

    CERN Document Server

    Ishida, Yoshiteru

    2015-01-01

    This book describes the struggle to introduce a mechanism that enables next-generation information systems to maintain themselves. Our generation observed the birth and growth of information systems, and the Internet in particular. Surprisingly information systems are quite different from conventional (energy, material-intensive) artificial systems, and rather resemble biological systems (information-intensive systems). Many artificial systems are designed based on (Newtonian) physics assuming that every element obeys simple and static rules; however, the experience of the Internet suggests a different way of designing where growth cannot be controlled but self-organized with autonomous and selfish agents. This book suggests using game theory, a mechanism design in particular, for designing next-generation information systems which will be self-organized by collective acts with autonomous components. The challenge of mapping a probability to time appears repeatedly in many forms throughout this book. The book...

  15. A note on the security of IS-RFID, an inpatient medication safety.

    Science.gov (United States)

    Safkhani, Masoumeh; Bagheri, Nasour; Naderi, Majid

    2014-01-01

    In this paper we investigate the security level of a comprehensive RFID solution to enhance inpatient medication safety, named IS-RFID, which has been recently proposed by Peris-Lopez et al. We analyses the security of the protocol against the known attacks in the context. The main target of this paper is to determine whether the new protocol provides the confidentiality property, which is expected to be provided by such a protocol. It was found that IS-RFID has critical weaknesses. The presented security investigations show that a passive adversary can retrieve secret parameters of patient's tag in cost of O(2(16)) off-line PRNG evaluations. Given the tag's secret parameters, any security claims are ruined. In this paper we presented an efficient passive secret disclosure attack which retrieves the main secret parameters related to the patient which shows that IS-RFID may put the patient safety on risk. The proposed attacking technique is in light of two vulnerabilities of the protocol: (1) the short length of the used PRNG, which is urged by the target technology, EPC C1 Gen2 ; (2) the message-generating mechanism utilizing PRNG was not carefully scrutinized. While the later point can be fixed by careful designing of the transferred messages between the protocol's party, the earlier point, i.e., the short length of the available PRNG for EPC C1 Gen2 tags, is a limitation which is forced by the technology. In addition, over the last years, schemes based solely on using simple operations or short PRNG (such as IS-RFID) have been shown to offer very low or no security at all. Recent advances in lightweight ciphers, such as PRESENT or Grain , seem a much more appropriate solution rather than relying on short PRNGs. However, such solutions breaks the EPC C1 Gen2 compatibility. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  16. Logistics Reduction: RFID Enabled Autonomous Logistics Management (REALM)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Logistics Reduction (LR) project Radio-frequency identification (RFID) Enabled Autonomous Logistics Management (REALM) task...

  17. Embedded RFID Recorder in short-range wireless devices

    DEFF Research Database (Denmark)

    2010-01-01

    range communication devices. The problem is solved in that the portable communications device comprises a wireless communications interface for communicating with another device, a memory and an RFID-recorder for receiving an RFID-signal transmitted from an RFID-interrogator, wherein the device...... is adapted for storing individual received RFID-signals in the memory. An advantage of the invention is that it provides a relatively simple scheme for extracting information from a current environment of a portable communications device. The invention may e.g. be used for adapting listening devices, e...

  18. Towards an Effective Management Strategy for Passive RFID Implementation

    National Research Council Canada - National Science Library

    Fisch, John N; Koch, David M

    2004-01-01

    .... However, many issues central to passive RFID implementation remain unresolved. First and foremost, a comprehensive management strategy, including a complete redesign of business practices, must be developed...

  19. Ethical implications of implantable radiofrequency identification (RFID) tags in humans.

    Science.gov (United States)

    Foster, Kenneth R; Jaeger, Jan

    2008-08-01

    This article reviews the use of implantable radiofrequency identification (RFID) tags in humans, focusing on the VeriChip (VeriChip Corporation, Delray Beach, FL) and the associated VeriMed patient identification system. In addition, various nonmedical applications for implanted RFID tags in humans have been proposed. The technology offers important health and nonhealth benefits, but raises ethical concerns, including privacy and the potential for coercive implantation of RFID tags in individuals. A national discussion is needed to identify the limits of acceptable use of implantable RFID tags in humans before their use becomes widespread and it becomes too late to prevent misuse of this useful but ethically problematic technology.

  20. RFID and Auto-ID in planning and logistics

    CERN Document Server

    Jones, Erick C

    2011-01-01

    As RFID technology is becoming increasingly popular, the need has arisen to address the challenges and approaches to successful implementation. RFID and Auto-ID in Planning and Logistics: A Practical Guide for Military UID Applications presents the concepts for students, military personnel and contractors, and corporate managers to learn about RFID and other automatic information capture technologies, and their integration into planning and logistics functions. The text includes comparisons of RFID with technologies such as bar codes, satellite tags, and global positioning systems and provides

  1. RFID-WSN integrated architecture for energy and delay- aware routing a simulation approach

    CERN Document Server

    Ahmed, Jameel; Tayyab, Muhammad; Nawaz, Menaa

    2015-01-01

    The book identifies the performance challenges concerning Wireless Sensor Networks (WSN) and Radio Frequency Identification (RFID) and analyzes their impact on the performance of routing protocols. It presents a thorough literature survey to identify the issues affecting routing protocol performance, as well as a mathematical model for calculating the end-to-end delays of the routing protocol ACQUIRE; a comparison of two routing protocols (ACQUIRE and DIRECTED DIFFUSION) is also provided for evaluation purposes. On the basis of the results and literature review, recommendations are made for better selection of protocols regarding the nature of the respective application and related challenges. In addition, this book covers a proposed simulator that integrates both RFID and WSN technologies. Therefore, the manuscript is divided in two major parts: an integrated architecture of smart nodes, and a power-optimized protocol for query and information interchange.

  2. Investigating Feasibility of Multiple UHF Passive RFID Transmitters Using Backscatter Modulation Scheme in BCI Applications

    DEFF Research Database (Denmark)

    Al Ajrawi, Shams; Sarkar, Mahasweta; Mihovska, Albena

    Building a wireless body area network (WBAN) application including implantable transceivers placed inside the human brain to collect the data from the electrodes and transmit them wirelessly to a controller placed outside the brain on the scalp faced major challenges. The transmission...... using passive RFID as the implantable transmitters and letting them operate in the UHF range. Backscatter modulation has been used as a power transfer mechanism. Investigation on the feasibility and applicability of implantable UHF Passive RFID transmitters inside the brain is done for capturing multi......-channel ECoG signals when traversing through a phantom brain model as a transmission medium for the experiments at a high data transfer rate. Detailed analysis has been done on parameters such as Received Signal Strength Indication (RSSI), signal to noise ratio (SNR), Maximum number of electrodes, Path Loss...

  3. The Potential of RFID Technology in the Textile and Clothing Industry: Opportunities, Requirements and Challenges

    Science.gov (United States)

    Legnani, Elena; Cavalieri, Sergio; Pinto, Roberto; Dotti, Stefano

    In the current competitive environment, companies need to extensively exploit the use of advanced technologies in order to develop a sustainable advantage, enhance their operational efficiency and better serve customers. In this context, RFID technology has emerged as a valid support for the company progress and its value is becoming more and more apparent. In particular, the textile and clothing industry, characterised by short life-cycles , quick response production , fast distribution, erratic customer preferences and impulsive purchasing, is one of the sectors which can extensively benefit from the RFID technology. However, actual applications are still very limited, especially in the upstream side of the supply network. This chapter provides an insight into the main benefits and potentials of this technology and highlights the main issues which are currently inhibiting its large scale development in the textile and clothing industry. The experience of two industry-academia projects and the relative fallouts are reported.

  4. Logic design of Josephson network. II

    International Nuclear Information System (INIS)

    Nakajima, K.; Onodera, Y.

    1978-01-01

    By numerical calculations of the differential-difference sine-Gordon equation, we have discussed the discrete Josephson-junction transmission lines which are constructed of a series of small-area Josephson junctions connected by superconducting strips. It is shown that the discrete Josephson lines containing D lines, N lines, T turning points, and S turning points are elementarily characterized by the discreteness parameter (2πLI/sub c//Phi 0 )/sup 1/2/. On the discrete Josephson logic circuits there exists a region of forbidden propagation in the (2πLI/sub c//Phi 0 )/sup 1/2/-γ (bias-current parameter) plane for single flux quanta. A single flux quantum can be stuffed in a small area of the discrete Josephson logic circuits. The discrete circuits can be conveniently and easily linked to each other, in a practical fabrication of a Josephson network

  5. Design of atomic energy information network system

    International Nuclear Information System (INIS)

    Kim, Y. T.; Lee, E. J.; Han, K. W.; Lee, H. C.; Chang, J. H.

    2004-01-01

    As the 21 st century is expected to induce a Knowledge based society, responding to this kind of change on our own initiative could be achieved by establishing networks among atomic energy agencies with the Atomic Energy Portal Site in a pivotal role. Thus, enabling the knowledge information from each agency to be easily shared and utilized. Furthermore, it can contribute to further researches by providing accumulated knowledge in the atomic energy, such as research output and past achievements, and by avoiding the repetition of researches on the same subjects. It could also provide remote educational data to researchers and industrial experts in atomic energy, as well as atomic energy information for general public consistently, so that we can promote our confidence in atomic energy

  6. Design and optimizing factors of PACS network architecture

    International Nuclear Information System (INIS)

    Tao Yonghao; Miao Jingtao

    2001-01-01

    Objective: Exploring the design and optimizing factors of picture archiving and communication system (PACS) network architecture. Methods: Based on the PACS of shanghai first hospital to performed the measurements and tests on the requirements of network bandwidth and transmitting rate for different PACS functions and procedures respectively in static and dynamic network traffic situation, utilizing the network monitoring tools which built-in workstations and provided by Windows NT. Results: No obvious difference between switch equipment and HUB when measurements and tests implemented in static situation except route which slow down the rate markedly. In dynamic environment Switch is able to provide higher bandwidth utilizing than HUB and local system scope communication achieved faster transmitting rate than global system. Conclusion: The primary optimizing factors of PACS network architecture design include concise network topology and disassemble tremendous global traffic to multiple distributed local scope network communication to reduce the traffic of network backbone. The most important issue is guarantee essential bandwidth for diagnosis procedure of medical imaging

  7. Robust Optimization of Fourth Party Logistics Network Design under Disruptions

    Directory of Open Access Journals (Sweden)

    Jia Li

    2015-01-01

    Full Text Available The Fourth Party Logistics (4PL network faces disruptions of various sorts under the dynamic and complex environment. In order to explore the robustness of the network, the 4PL network design with consideration of random disruptions is studied. The purpose of the research is to construct a 4PL network that can provide satisfactory service to customers at a lower cost when disruptions strike. Based on the definition of β-robustness, a robust optimization model of 4PL network design under disruptions is established. Based on the NP-hard characteristic of the problem, the artificial fish swarm algorithm (AFSA and the genetic algorithm (GA are developed. The effectiveness of the algorithms is tested and compared by simulation examples. By comparing the optimal solutions of the 4PL network for different robustness level, it is indicated that the robust optimization model can evade the market risks effectively and save the cost in the maximum limit when it is applied to 4PL network design.

  8. J3Gen: A PRNG for Low-Cost Passive RFID

    Directory of Open Access Journals (Sweden)

    Jordi Herrera-Joancomartí

    2013-03-01

    Full Text Available Pseudorandom number generation (PRNG is the main security tool in low-cost passive radio-frequency identification (RFID technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal.

  9. A Novel RFID EMSICC-based Chipless Tag

    Directory of Open Access Journals (Sweden)

    S. Sakouhi

    2017-04-01

    Full Text Available A new Radio Frequency Identification (RFID chipless tag based on the Substrate Integrated Waveguide (SIW technology is proposed in this paper. The tag highlights the importance of using such technologies allowing a surface miniaturization, a high Q-factor and an original shape. Thus, the novel design consists of an Eight-Mode Substrate Integrated Circular Cavity (EMSICC associated to an Ultra Wideband (UWB bowtie-shaped antenna. The EMSICC is realized by bisecting the Quarter Mode Substrate Integrated Circular Cavity (QMSICC into two parts, while preserving the same resonant frequency and the original electric field distribution. Further, the operating frequency band is from 5 GHz to 8 GHz within a compact area of 4.97 × 1.05 cm2. The proposed design is experimentally validated in the frequency domain.

  10. Virtual private network design : a proof of the tree routing conjecture on ring networks

    NARCIS (Netherlands)

    Hurkens, C.A.J.; Keijsper, J.C.M.; Stougie, L.

    2007-01-01

    A basic question in virtual private network (VPN) design is if the symmetric version of the problem always has an optimal solution which is a tree network. An affirmative answer would imply that the symmetric VPN problem is solvable in polynomial time. We give an affirmative answer in case the

  11. Virtual private network design: a proof of the tree routing conjecture on ring networks

    NARCIS (Netherlands)

    C.A.J. Hurkens (Cor); J.C.M. Keijsper; L. Stougie (Leen)

    2005-01-01

    htmlabstractA basic question in Virtual Private Network (VPN) design is if the symmetric version of the problem always has an optimal solution which is a tree network. An affirmative answer would imply that the symmetric VPN problem is solvable in polynomial time. We give an affirmative answer in

  12. Designing New Supply Chain Networks: Tomato and Mango Case Studies

    NARCIS (Netherlands)

    Vorst, van der J.G.A.J.; Schouten, R.E.; Luning, P.A.; Kooten, van O.

    2014-01-01

    Consumers expect product availability as well as product quality and safety in retail outlets. When designing or re-designing fruit and vegetables supply chain networks one has to take these demands into consideration next to traditional efficiency and responsiveness requirements. In food science

  13. design of government cloud network for a developing economy

    African Journals Online (AJOL)

    This paper presents the design of a Government Cloud (G-Cloud) network for Ondo State Government which will provide Infrastructure as a Service (IaaS) and Software as Service (SaaS) to major government establishments and citizens within Ondo State. In designing the G-Cloud a mathematical model of cloud computing ...

  14. Application of design of experiments and artificial neural networks ...

    African Journals Online (AJOL)

    This paper discusses the use of Distance based optimal designs in the design of experiments (DOE) and artificial neural networks (ANN) in optimizing the stacking sequence for simply supported laminated composite plate under uniformly distributed load (UDL) for minimizing the deflections and stresses. A number of finite ...

  15. Design of common heat exchanger network for batch processes

    International Nuclear Information System (INIS)

    Anastasovski, Aleksandar

    2014-01-01

    Heat integration of energy streams is very important for the efficient energy recovery in production systems. Pinch technology is a very useful tool for heat integration and maximizing energy efficiency. Creating of heat exchangers network as a common solution for systems in batch mode that will be applicable in all existing time slices is very difficult. This paper suggests a new methodology for design of common heat exchanger network for batch processes. Heat exchanger network designs were created for all determined repeatable and non-repeatable time periods – time slices. They are the basis for creating the common heat exchanger network. The common heat exchanger network as solution, satisfies all heat-transfer needs for each time period and for every existing combination of selected streams in the production process. This methodology use split of some heat exchangers into two or more heat exchange units or heat exchange zones. The reason for that is the multipurpose use of heat exchangers between different pairs of streams in different time periods. Splitting of large heat exchangers would maximize the total heat transfer usage of heat exchange units. Final solution contains heat exchangers with the minimum heat load as well as the minimum need of heat transfer area. The solution is applicable for all determined time periods and all existing stream combinations. - Highlights: •Methodology for design of energy efficient systems in batch processes. •Common Heat Exchanger Network solution based on designs with Pinch technology. •Multipurpose use of heat exchangers in batch processes

  16. Asynchronous design of Networks-on-Chip

    DEFF Research Database (Denmark)

    Sparsø, Jens

    2007-01-01

    -synchronous, mesochronous, globally-asynchronous locally-synchronous and fully asynchronous), discusses the circuitry needed to implement these timing methodologies, and provides some implementation details for a couple of asynchronous NoCs designed at the Technical University of Denmark (DTU). The paper is written...... to support an invited talk at the NORCHIP’2007 conference....

  17. Ensemble Entropy for Monitoring Network Design

    Directory of Open Access Journals (Sweden)

    Leonardo Alfonso

    2014-03-01

    Full Text Available Information-theory provides, among others, conceptual methods to quantify the amount of information contained in single random variables and methods to quantify the amount of information contained and shared among two or more variables. Although these concepts have been successfully applied in hydrology and other fields, the evaluation of these quantities is sensitive to different assumptions in the estimation of probabilities. An example is the histogram bin size used to estimate probabilities to calculate Information Theory quantities via frequency methods. The present research aims at introducing a method to take into consideration the uncertainty coming from these parameters in the evaluation of the North Sea’s water level network. The main idea is that the entropy of a random variable can be represented as a probability distribution of possible values, instead of entropy being a deterministic value. The method consists of solving multiple scenarios of Multi-Objective Optimization Problem in which information content is maximized and redundancy is minimized. Results include probabilistic analysis of the chosen parameters on the resulting family of Pareto fronts, providing additional criteria on the selection of the final set of monitoring points.

  18. Thermodynamic criterions for heat exchanger networks design

    Energy Technology Data Exchange (ETDEWEB)

    Guiglion, C.; Farhat, S.; Pibouleau, L.; Domenech, S. (Ecole Nationale Superieure d' Ingenieurs de Genie Chimique, 31 - Toulouse (France))

    1994-03-01

    This problem under consideration consists in selecting a heat exchanger network able to carry out a given request in heatings and coolings, in steady-state behaviour with constant pressure, by using if necessary cold and hot utilities, and under the constraint [Delta] T [>=] e in order to restrict investment costs. The exchanged energy and the produced entropy are compared in terms of operating costs. According to the request to be satisfied and the constraints of utility consumption, it is shown that the goal to minimize the produced entropy more or less agrees with the goal to minimize the exchanged energy. In the last part, the case where the cost of utility use is assumed to be proportional to the flow rate, with a proportionality constant only depending on the input thermodynamic state, is studied thoroughly. Under this assumption, the minimization of operating costs is compatible with the minimization of exchanged energy, and can be obtained via the maximization of the difficulty of the request part, made without using utilities. This point is based on the notion of a request easier than another, which explicits the quite vague idea that a request is all the more easier because it involves less heatings at high temperatures and less coolings at low temperatures. (author). 5 refs., 1 fig.

  19. District Heating Network Design and Configuration Optimization with Genetic Algorithm

    DEFF Research Database (Denmark)

    Li, Hongwei; Svendsen, Svend

    2013-01-01

    In this paper, the configuration of a district heating network which connects from the heating plant to the end users is optimized. Each end user in the network represents a building block. The connections between the heat generation plant and the end users are represented with mixed integer...... and the pipe friction and heat loss formulations are non-linear. In order to find the optimal district heating network configuration, genetic algorithm which handles the mixed integer nonlinear programming problem is chosen. The network configuration is represented with binary and integer encoding...... and it is optimized in terms of the net present cost. The optimization results indicates that the optimal DH network configuration is determined by multiple factors such as the consumer heating load, the distance between the heating plant to the consumer, the design criteria regarding the pressure and temperature...

  20. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Pisinger, David

    We present a matheuristic, an integer programming based heuristic, for the liner shipping network design problem. This problem consists of finding a set of container shipping routes defining a capacitated network for cargo transport. The objective is to maximize the revenue of cargo transport...... the available fleet of container vessels. The cargo transports make extensive use of transshipments between routes and the number of transshipments of the cargo flow is decisive for network profitability. Computational results are reported for the benchmark suite LINER-LIB 2012 following the industry standard...... of weekly departures on every schedule. The heuristic shows overall good performance and is able to find high quality solutions within competitive execution times. The matheuristic can also be applied as a decision support tool to improve an existing network by optimizing on a designated subset...