WorldWideScience

Sample records for reviews technology readiness

  1. Technology Readiness Level Guidebook

    Science.gov (United States)

    2017-09-01

    This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

  2. Readiness for Living Technology

    DEFF Research Database (Denmark)

    Peronard, Jean-Paul

    2013-01-01

    This paper is a comparative analysis between workers in healthcare with high and low degree of readiness for living technology such as robotics. To explore the differences among workers’ readiness for robotics in healthcare, statistical analysis was conducted in the data set obtained from 200...

  3. Making Technology Ready: Integrated Systems Health Management

    Science.gov (United States)

    Malin, Jane T.; Oliver, Patrick J.

    2007-01-01

    This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

  4. Technologies and mechanisms for safety control of ready-to-eat muscle foods: an updated review.

    Science.gov (United States)

    Jiang, Jiang; Xiong, Youling L

    2015-01-01

    Ready-to-eat (RTE) muscle foods refer to a general category of meat and poultry products that are fully cooked and consumable without reheating. These products, including whole and sliced pork, beef, turkey, chicken, and variety of meats, in the forms of ham, roast, rolls, sausage, and frankfurter, are widely available in the delicatessen section of retail stores or various food service outlets. However, difficulties in avoidance of contamination by foodborne pathogens, notably Listeria monocytogenes, during product postlethality repackaging render RTE meats labile to outbreaks. Accordingly, the USDA-FSIS has established processing guidelines and regulations, which are constantly updated, to minimize foodborne pathogens in RTE products. Technologies that complement good manufacturing practice have been developed to control RTE meat safety. Among them, various antimicrobial product formulations, postpackaging pasteurization (thermal and nonthermal), and antimicrobial packaging are being used. Through these efforts, outbreaks linked to RTE meat consumption have substantially reduced in recent years. However, the pervasive and virulent nature of L. monocytogenes and the possible presence of other cold-tolerant pathogens entail continuing developments of new intervention technologies. This review updates existing and emerging physical and chemical methods and their mode of action to inactivate or inhibit threatening microorganisms in RTE muscle foods.

  5. NASA Technology Readiness Level Definitions

    Science.gov (United States)

    Mcnamara, Karen M.

    2012-01-01

    This presentation will cover the basic Technology Readiness Level (TRL) definitions used by the National Aeronautics and Space Administration (NASA) and their specific wording. We will discuss how they are used in the NASA Project Life Cycle and their effectiveness in practice. We'll also discuss the recent efforts by the International Standards Organization (ISO) to develop a broadly acceptable set of TRL definitions for the international space community and some of the issues brought to light. This information will provide input for further discussion of the use of the TRL scale in manufacturing.

  6. Readiness for banking technologies in developing countries

    African Journals Online (AJOL)

    Professor in the Department of Marketing Management, University of Johannesburg. ... From the organisation's perspective, it has been suggested ... technological readiness of developing countries' consumers, in an urban environment,.

  7. Acoustics Critical Readiness Review

    Science.gov (United States)

    Ballard, Kenny

    2010-01-01

    This presentation reviews the status of the acoustic equipment from the medical operations perspective. Included is information about the acoustic dosimeters, sound level meter, and headphones that are planned for use while on orbit. Finally there is information about on-orbit hearing assessments.

  8. System analysis for technology transfer readiness assessment of horticultural postharvest

    Science.gov (United States)

    Hayuningtyas, M.; Djatna, T.

    2018-04-01

    Availability of postharvest technology is becoming abundant, but only a few technologies are applicable and useful to a wider community purposes. Based on this problem it requires a significant readiness level of transfer technology approach. This system is reliable to access readiness a technology with level, from 1-9 and to minimize time of transfer technology in every level, time required technology from the selection process can be minimum. Problem was solved by using Relief method to determine ranking by weighting feasible criteria on postharvest technology in each level and PERT (Program Evaluation Review Technique) to schedule. The results from ranking process of post-harvest technology in the field of horticulture is able to pass level 7. That, technology can be developed to increase into pilot scale and minimize time required for technological readiness on PERT with optimistic time of 7,9 years. Readiness level 9 shows that technology has been tested on the actual conditions also tied with estimated production price compared to competitors. This system can be used to determine readiness of technology innovation that is derived from agricultural raw materials and passes certain stages.

  9. Technology Readiness for the Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    Kirkham, Harold; Marinovici, Maria C.; Fitzpatrick, G.; Lindsey, K.; McBride, James; Clark, G. L.

    2013-06-30

    Reluctance to adopt new technology into a utility application is understandable, given the critical nature of the infrastructure and the less-than-ideal experiences of some power companies. The authors of this paper have considered adapting the NASA approach of classifying technology readiness, but find it not quite appropriate because NASA was both the developer and the eventual user of the new technology it was evaluating, whereas a utility is ordinarily in the mode of a customer, acquiring a new product from a manufacturer. Instead of a generic scale of technology readiness, a scale of readiness is proposed specifically for the smart grid, based on the many standards that exist for the relevant technologies. In this paper we present an overall structure for organization those standards. The acceptance of new technology is organized into five SGL (Smart Grid Level) steps, numbered five through 9 to correspond approximately to the last five numbers of the NASA TRL scale. SGL 5 is a certification that the hardware and software of the technology is safe for the system into which is intended to be placed. SGL 6 is documentation that the system is safe for itself, and will have adequate reliability. It is thus clear that the steps differ from NASA’s TRL in that technology development is not required, the transition is more one of documenting already existing system readiness. Since SGL 6 describes a system that is safe for the power system and for itself, it should not be restricted from being in a pilot-scale study, and achieving SGL 7. A larger-scale demonstration in a realistic environment will demonstrate interoperability and achieve SGL 8. Only when systems are installed and operating, and when disposal plans are in place will the designation of fully operable at SGL 9 be granted.

  10. Getting a technology-based diabetes intervention ready for prime time: a review of usability testing studies.

    Science.gov (United States)

    Lyles, Courtney R; Sarkar, Urmimala; Osborn, Chandra Y

    2014-10-01

    Consumer health technologies can educate patients about diabetes and support their self-management, yet usability evidence is rarely published even though it determines patient engagement, optimal benefit of any intervention, and an understanding of generalizability. Therefore, we conducted a narrative review of peer-reviewed articles published from 2009 to 2013 that tested the usability of a web- or mobile-delivered system/application designed to educate and support patients with diabetes. Overall, the 23 papers included in our review used mixed (n = 11), descriptive quantitative (n = 9), and qualitative methods (n = 3) to assess usability, such as documenting which features performed as intended and how patients rated their experiences. More sophisticated usability evaluations combined several complementary approaches to elucidate more aspects of functionality. Future work pertaining to the design and evaluation of technology-delivered diabetes education/support interventions should aim to standardize the usability testing processes and publish usability findings to inform interpretation of why an intervention succeeded or failed and for whom.

  11. DOE Richland readiness review for PUREX

    International Nuclear Information System (INIS)

    Zamorski, M.J.

    1984-01-01

    For ten months prior to the November 1983 startup of the Plutonium and URanium EXtraction (PUREX) Plant, the Department of Energy's Richland Operations Office conducted an operational readiness review of the facility. This review was performed consistent with DOE and RL Order 5481.1 and in accordance with written plans prepared by the program and safety divisions. It involved personnel from five divisions within the office. The DOE review included two tasks: (1) overview and evaluation of the operating contractor's (Rockwell Hanford) readiness review for PUREX, and (2) independent assessment of 25 significant aspects of the startup effort. The RL reviews were coordinated by the program division and were phased in succession with the contractor's readiness review. As deficiencies or concerns were noted in the course of the review they were documented and required formal response from the contractor. Startup approval was given in three steps as the PUREX Plant began operation. A thorough review was performed and necessary documentation was prepared to support startup authorization in November 1983, before the scheduled startup date

  12. Vogtle Unit 1 readiness review: Assessment of Georgia Power Company readiness review pilot program

    International Nuclear Information System (INIS)

    Lewis, G.

    1987-09-01

    Georgia Power Company (GPC) performed a readiness review at Vogtle Unit 1 as a pilot program. The pilot program was a new and innovative approach for the systematic and disciplined review, with senior management involvement, of GPC's implementation of design, construction, and operational readiness processes. The program's principal objective was to increase the level of assurance that quality programs at Vogtle Unit 1 have been accomplished in accordance with regulatory requirements. This report assesses the effectiveness of the GPC's readiness review pilot program (RRPP) at Vogtle Unit 1. It includes (1) an overview of what was experienced during the program's implementation, (2) an assessment of how well program objectives were met, and (3) lessons learned on the future use of the readiness review concept. Overall, GPC and the NRC staff believe that the RRPP at Vogtle Unit 1 was a success and that the program provided significant added assurance that Vogtle Unit 1 licensing commitments and NRC regulations have been adequately implemented. Although altering the NRC licensing review process for the few plants still in the construction pipeline may not be appropriate, licensees may benefit significantly by performing readiness reviews on their own initiative as GPC did for Vogtle. (7 refs.)

  13. Solar Sail Propulsion Technology Readiness Level Database

    Science.gov (United States)

    Adams, Charles L.

    2004-01-01

    The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 solar sail system design and development hardware demonstration activities over the past 20 months. Able Engineering Company (AEC) of Goleta, CA is leading one team and L Garde, Inc. of Tustin, CA is leading the other team. Component, subsystem and system fabrication and testing has been completed successfully. The goal of these activities is to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by 2006. These activities will culminate in the deployment and testing of 20-meter solar sail system ground demonstration hardware in the 30 meter diameter thermal-vacuum chamber at NASA Glenn Plum Brook in 2005. This paper will describe the features of a computer database system that documents the results of the solar sail development activities to-date. Illustrations of the hardware components and systems, test results, analytical models, relevant space environment definition and current TRL assessment, as stored and manipulated within the database are presented. This database could serve as a central repository for all data related to the advancement of solar sail technology sponsored by the ISPT, providing an up-to-date assessment of the TRL of this technology. Current plans are to eventually make the database available to the Solar Sail community through the Space Transportation Information Network (STIN).

  14. Technological readiness of evolutionary water cooled reactors

    International Nuclear Information System (INIS)

    Juhn, P.E.

    1999-01-01

    Nuclear energy has evolved to a mature industry that supplies over 16% of the world's electricity, and it represents an important option for meeting the global energy demands of the coming century in an environmentally acceptable manner. New, evolutionary water cooled reactor designs that build on successful performance of predecessors have been developed; these designs have generally been guided by wishes to reduce cost, to improve availability and reliability, and to meet increasingly stringent safety objectives. These three aspects are important factors in what has been called technological readiness for an expanded deployment of nuclear power; a major increase in utilization of nuclear power will only occur if it is economically competitive, and meets safety expectations. To this end, the industry will also have to maintain or improve the public perception of nuclear power as a benign, economical and reliable energy source. (author)

  15. Smart Grid Technology and Consumer Call Center Readiness

    OpenAIRE

    Schamber, Kelsey L.

    2010-01-01

    The following reasearch project deals with utility call center readiness to address customer concerns and questions about the Smart Grid and smart meter technology. Since consumer engagement is important for the benefits of the Smart Grid to be realized, the readiness and ability of utilities to answer consumer questions is an important issue. Assessing the readiness of utility call centers to address pertinant customer concerns was accomplished by calling utility call centers with Smart Grid...

  16. UNIVERSITY TEACHERS’ READINESS TO APPLY THE MODERN EDUCATIONAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Irina O. Kotlyarova

    2015-01-01

    Full Text Available The aim of the research is to investigate the readiness of the university teachers to apply the modern educational technologies. Methods. The methods include theoretical: analysis of existing modern educational technologies, the concept «readiness» and its components, abstraction of signs and kinds of modern educational technologies based on the scientific literature and in the Federal State Educational Standards (FSES; empirical: questionnaires and testing methods for detecting levels of university teachers’ skills and readiness to use modern educational technology. Results. The main features of modern educational technologies are identified and justified that are to comply with modern methodology of the theory and practice of education study and the latest FSES requirements; the level of science, manufacturing, and modern rules of human relations. The components of readiness of university teachers to use modern educational technology are structured. The linguistic component is included along with the cognitive, psychological, operational, connotative components; its necessity is proved. The average level of readiness for the use of modern educational technology by university teachers is identified. Scientific novelty. The author specifies the features of the modern educational technology. The most significant components of higher-education teaching personnel readiness to use technological innovations are identified. As a whole, these results form the indicative framework for the development and measurement of readiness of the university teachers to use the modern educational technology. The development of the readiness of the university teachers to apply the modern educational technologies is proved to be an issue of current interest. Practical significance. The research findings can be used as the basis of techniques and methods designing for its further development and measurement of the training, retraining and advanced training of

  17. An investigation of the effects of technology readiness on technology acceptance in e-HRM

    OpenAIRE

    Erdoğmuş, Nihat; Esen, Murat

    2011-01-01

    The aim of this paper is to investigate the effects of technology readiness on technology acceptance in e-HRM field. The data for this study were collected from 65 Human Resource (HR) managers representing top 500 largest private sector companies in Turkey. The research model based on two theories: Parasuraman's technology readiness and Davis’ technology acceptance model. The results of the study showed that optimism and innovativeness dimensions of technology readiness positively influenced ...

  18. Readiness Review of BWXT for Fabrication of AGR 5/6/7 Compacts

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Douglas William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sharp, Michelle Tracy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-02-01

    In support of preparations for fabricating compacts for the Advanced Gas Reactor (AGR) fuel qualification irradiation experiments (AGR-5/6/7), Idaho National Laboratory (INL) conducted a readiness review of the BWX Technology (BWXT) procedures, processes, and equipment associated with compact fabrication activities at the BWXT Nuclear Operations Group (BWXT-NOG) facility outside Lynchburg, VirginiaVA. The readiness review used quality assurance requirements taken from the American Society of Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008/1a-2009) as a basis to assess readiness to start compact fabrication.

  19. Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

    National Research Council Canada - National Science Library

    Mandelbaum, Jay

    2006-01-01

    .... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

  20. Readiness factors for information system strategic planning among universities in developing countries: a systematic review

    Science.gov (United States)

    Irfan, M.; Putra, S. J.; Alam, C. N.; Subiyakto, A.; Wahana, A.

    2018-03-01

    The implementation of information system strategic planning (ISSP) in higher education institutions is to improve work efficiency, management effectiveness in order to improve organizational competitive advantage. However, the question of whether all universities are ready to implement ISSP as a way to achieve organizational goals has not been answered. This study aims to investigate the readiness phenomena through literature study. The method used is by using the Systematic Literature Review (SLR) instrument to identify readiness factors on the implementation of ISSP, especially among the institutions of higher education in developing countries. This study has identified 10 readiness measurement. There are three categories of measurement, namely people, processes and technologies that represent 11 factors of ISSP readiness measurement in universities.

  1. Definition of Technology Readiness Levels for Transmutation Fuel Development

    International Nuclear Information System (INIS)

    Jon Carmack; Kemal O. Pasamehmetoglu

    2008-01-01

    To quantitatively assess the maturity of a given technology, the Technology Readiness Level (TRL) process is used. The TRL process has been developed and successfully used by the Department of Defense (DOD) for development and deployment of new technology and systems for defense applications. In addition, NASA has also successfully used the TRL process to develop and deploy new systems for space applications. Transmutation fuel development is a critical technology needed for closing the nuclear fuel cycle. Because the deployment of a new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the transmutation fuel development program is very useful as a management and tracking tool. This report provides definition of the technology readiness level assessment process as defined for use in assessing nuclear fuel technology development for the Transuranic Fuel Development Campaign

  2. Integrating technology readiness into the expectation-confirmation model: an empirical study of mobile services.

    Science.gov (United States)

    Chen, Shih-Chih; Liu, Ming-Ling; Lin, Chieh-Peng

    2013-08-01

    The aim of this study was to integrate technology readiness into the expectation-confirmation model (ECM) for explaining individuals' continuance of mobile data service usage. After reviewing the ECM and technology readiness, an integrated model was demonstrated via empirical data. Compared with the original ECM, the findings of this study show that the integrated model may offer an ameliorated way to clarify what factors and how they influence the continuous intention toward mobile services. Finally, the major findings are summarized, and future research directions are suggested.

  3. Technology readiness levels for advanced nuclear fuels and materials development

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, W.J., E-mail: jon.carmack@inl.gov [Idaho National Laboratory, Idaho Falls, ID (United States); Braase, L.A.; Wigeland, R.A. [Idaho National Laboratory, Idaho Falls, ID (United States); Todosow, M. [Brookhaven National Laboratory, Upton, NY (United States)

    2017-03-15

    Highlights: • Definition of nuclear fuels system technology readiness level. • Identification of evaluation criteria for nuclear fuel system TRLs. • Application of TRLs to fuel systems. - Abstract: The Technology Readiness process quantitatively assesses the maturity of a given technology. The National Aeronautics and Space Administration (NASA) pioneered the process in the 1980s to inform the development and deployment of new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications. It was also adopted by the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is needed to improve the performance and safety of current and advanced reactors, and ultimately close the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the assessment process to advanced fuel development is useful as a management, communication, and tracking tool. This article provides definition of technology readiness levels (TRLs) for nuclear fuel technology as well as selected examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).

  4. Survey on the Technology Readiness Level of R and D projects for a Technical Risk Management

    International Nuclear Information System (INIS)

    Song, S. J.; Chang, J.; Lee, K. Y.

    2008-01-01

    The purpose of applying the Technology Readiness Level/Design Readiness Level (TRL/DRL) in technical risk management is to make technology assessments, and improve communication among researchers with a consistent, systematic technology readiness Technical risk management for the Nuclear Hydrogen Production project was adopted of experience assessed with Delphi Method from the Next Generation Nuclear Plant(NGNP)of the DOE to improve the poor contactor management of the major projects which experienced cost increases and/or schedule delays in long-term. In the current phase that is doing key technology research and development projects, the technology readiness level was reviewed and applied to the Nuclear Hydrogen Production project to prepare an input for the next design phases. Based on the previous works, pre-conceptional design and key R and D works for the Nuclear Hydrogen Design and Development(NHDD) projects and the results of key research and development projects, the TRL was applied to assess the levels and compared with the advanced design stages of Westinghouse Electric Co. With this process, several issues were identified to apply the design and technology level to the familiar steps of design process and research and development projects. In order to resolve these issues, it is needed to systematically adjust and modify the current process with TRLs

  5. AGR-5/6/7 LEUCO Kernel Fabrication Readiness Review

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Douglas W. [Idaho National Lab. (INL), Idaho Falls, ID (United States). Fuel Design and Development; Bailey, Kirk W. [Idaho National Lab. (INL), Idaho Falls, ID (United States). ART Quality Assurance Engineer

    2015-02-01

    In preparation for forming low-enriched uranium carbide/oxide (LEUCO) fuel kernels for the Advanced Gas Reactor (AGR) fuel development and qualification program, Idaho National Laboratory conducted an operational readiness review of the Babcock & Wilcox Nuclear Operations Group – Lynchburg (B&W NOG-L) procedures, processes, and equipment from January 14 – January 16, 2015. The readiness review focused on requirements taken from the American Society Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008, 1a-2009), a recent occurrence at the B&W NOG-L facility related to preparation of acid-deficient uranyl nitrate solution (ADUN), and a relook at concerns noted in a previous review. Topic areas open for the review were communicated to B&W NOG-L in advance of the on-site visit to facilitate the collection of objective evidences attesting to the state of readiness.

  6. Teacher Readiness to Integrate Information Technology into ...

    African Journals Online (AJOL)

    ... of simple percentage and frequency calculation. The results revealed that majority of the teachers have low level of knowledge about IT. In the same vein, majority of teachers in the schools in this study did not have adequate IT skills. However, the teachers have positive attitude toward the use of information technology.

  7. Operational readiness review phase-1 final report for WRAP-1

    Energy Technology Data Exchange (ETDEWEB)

    Bowen, W., Westinghouse Hanford

    1996-12-27

    This report documents the Operational Readiness Review for WRAP-1 Phase-1 operations. The report includes all criteria, lines of inquiry with resulting Findings and Observations. The review included assessing operational capability of the organization and the computer controlled process and facility systems.

  8. Technology readiness levels for the new millennium program

    Science.gov (United States)

    Moynihan, P. I.; Minning, C. P.; Stocky, J. F.

    2003-01-01

    NASA's New Millennium Program (NMP) seeks to advance space exploration by providing an in-space validating mechanism to verify the maturity of promising advanced technologies that cannot be adequately validated with Earth-based testing alone. In meeting this objective, NMP uses NASA Technology Readiness Levels (TRL) as key indicators of technology advancement and assesses development progress against this generalized metric. By providing an opportunity for in-space validation, NMP can mature a suitable advanced technology from TRL 4 (component and/or breadboard validation in laboratory environment) to a TRL 7 (system prototype demonstrated in an Earth-based space environment). Spaceflight technology comprises a myriad of categories, types, and functions, and as each individual technology emerges, a consistent interpretation of its specific state of technological advancement relative to other technologies is problematic.

  9. Readiness Factors and Consumer Acceptance of Technology in Mobile Telephony

    Directory of Open Access Journals (Sweden)

    Lucilla Andrade Sousa Cunha

    2014-06-01

    Full Text Available This study aims at analyzing the variables of use and contact of users regarding to products and services of mobile phone technology. Technological innovation stands in the enterprise, enabling growth and creation of new products and services. In the theoretical framework, we used the technology readiness model, from users beliefs and feelings represented by four dimensions: optimism, innovativeness, discomfort and insecurity. It also highlights the technology acceptance model and presents two important constructs as perceived usefulness and ease of use. In short, the factors that support the technology readiness model could be preceding the technology acceptance model. To conduct this study, a field survey of students at the Federal University of Uberlândia / Campus FACIP was carried out. Results indicate optimism as the main factor to accept new mobile technology, due to the fact that the mobile devices provide benefits to people's lives and prompt them a positive attitude toward mobile technology. The perception of the user to purchase a mobile device is directly related to its usefulness and ease of handling of the technology.

  10. Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

    Science.gov (United States)

    Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

    2014-01-01

    The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

  11. Operational Readiness Review: Savannah River Replacement Tritium Facility

    International Nuclear Information System (INIS)

    1993-02-01

    The Operational Readiness Review (ORR) is one of several activities to be completed prior to introducing tritium into the Replacement Tritium Facility (RTF) at the Savannah River Site (SRS). The Secretary of Energy will rely in part on the results of this ORR in deciding whether the startup criteria for RTF have been met. The RTF is a new underground facility built to safely service the remaining nuclear weapons stockpile. At RTF, tritium will be unloaded from old components, purified and enriched, and loaded into new or reclaimed reservoirs. The RTF will replace an aging facility at SRS that has processed tritium for more than 35 years. RTF has completed construction and is undergoing facility startup testing. The final stages of this testing will require the introduction of limited amounts of tritium. The US Department of Energy (DOE) ORR was conducted January 19 to February 4, 1993, in accordance with an ORR review plan which was developed considering previous readiness reviews. The plan also considered the Defense Nuclear Facilities Safety Board (DNFSB) Recommendations 90-4 and 92-6, and the judgements of experienced senior experts. The review covered three major areas: (1) Plant and Equipment Readiness, (2) Personnel Readiness, and (3) Management Systems. The ORR Team was comprised of approximately 30 members consisting of a Team Leader, Senior Safety Experts, and Technical Experts. The ORR objectives and criteria were based on DOE Orders, industry standards, Institute of Nuclear Power Operations guidelines, recommendations of external oversight groups, and experience of the team members

  12. Operational readiness reviews for restart of L reactor

    International Nuclear Information System (INIS)

    Finley, R.H.

    1984-01-01

    The L Reactor at the Savannah River Plant is being restarted after being in a standby status since 1968. Operational Readiness Reviews (ORRs) were conducted by DOE-SR and contractor personnel concurrent with the restart activity. This paper summarizes the ORR activity

  13. Objectively measuring pain using facial expression: is the technology finally ready?

    Science.gov (United States)

    Dawes, Thomas Richard; Eden-Green, Ben; Rosten, Claire; Giles, Julian; Governo, Ricardo; Marcelline, Francesca; Nduka, Charles

    2018-03-01

    Currently, clinicians observe pain-related behaviors and use patient self-report measures in order to determine pain severity. This paper reviews the evidence when facial expression is used as a measure of pain. We review the literature reporting the relevance of facial expression as a diagnostic measure, which facial movements are indicative of pain, and whether such movements can be reliably used to measure pain. We conclude that although the technology for objective pain measurement is not yet ready for use in clinical settings, the potential benefits to patients in improved pain management, combined with the advances being made in sensor technology and artificial intelligence, provide opportunities for research and innovation.

  14. Future Ready Learning: Reimagining the Role of Technology in Education. 2016 National Education Technology Plan

    Science.gov (United States)

    Thomas, Susan

    2016-01-01

    The National Education Technology Plan is the flagship educational technology policy document for the United States. The 2016 Plan, "Future Ready Learning: Reimagining the Role of Technology in Education," articulates a vision of equity, active use, and collaborative leadership to make everywhere, all-the-time learning possible. While…

  15. Implementation plan for WRAP Module 1 operational readiness review

    International Nuclear Information System (INIS)

    Irons, L.G.

    1994-01-01

    The Waste Receiving and Processing Module 1 (WRAP 1) will be used to receive, sample, treat, and ship contact-handled (CH) transuranic (TRU), low-level waste (LLW), and low-level mixed waste (LLMW) to storage and disposal sites both on the Hanford site and off-site. The primary mission of WRAP 1 is to characterize and certify CH waste in 55-gallon and 85-gallon drums; and its secondary function is to certify CH waste standard waste boxes (SWB) and boxes of similar size for disposal. The WRAP 1 will provide the capability for examination (including x-ray, visual, and contents sampling), limited treatment, repackaging, and certification of CH suspect-TRU waste in 55-gallon drums retrieved from storage, as well as newly generated CH LLW and CH TRU waste drums. The WRAP 1 will also provide examination (X-ray and visual only) and certification of CH LLW and CH TRU waste in small boxes. The decision to perform an Operational Readiness Review (ORR) was made in accordance with WHC-CM-5-34, Solid Waste Disposal Operations Administration, Section 1.4, Operational Readiness Activities. The ORR will ensure plant and equipment readiness, management and personnel readiness, and management programs readiness for the initial startup of the facility. This implementation plan is provided for defining the conduct of the WHC ORR

  16. The BERG faculty students readiness for information technologies study

    Directory of Open Access Journals (Sweden)

    Horovèák Pavel

    2002-12-01

    Full Text Available The contribution deals with the reconnaissance of our students’ readiness to study information technologies, its interpretation, comparison with some published data as well as with a completion and evaluation of the reconnaissance. It specifies methods and processes of evaluation, structure, sections and questions of the reconnaissance. The reconnaissance was oriented particularly to the evaluation of knowledge in the information technologies area acquired at secondary schools. It was completed in a classical paper form as a preparation for the realization and utilization of questionnaire in the electronic form. The following is constructed using modern internet and database technologies and presents extensive possibilities of evaluation answers respondents. The results of the reconnaissance are presented in the form distribution (sex, domicile, secondary school, secondary school influence, work with a computer, operating and exploitation of internet technologies, familiarity with operating systems and typical applications software and programming languages as well as the interest in information technologies of respondents. The results are compared with some other published data and future perspectives of completion and its evaluation of completion are outlined.

  17. Integrative Literature Review: Ascertaining Discharge Readiness for Pediatrics After Anesthesia.

    Science.gov (United States)

    Whitley, Deborah R

    2016-02-01

    Unplanned hospital readmissions after the administration of general anesthesia for ambulatory procedures may contribute to loss of reimbursement and assessment of financial penalties. Pediatric patients represent a unique anesthetic risk. The purpose of this integrative literature review was to ascertain specific criteria used to evaluate discharge readiness for pediatric patients after anesthesia. This study is an integrative review of literature. An integrative literature search was conducted and included literature sources dated January 2008 to November 2013. Key words included pediatric, anesthesia, discharge, criteria, standards, assessment, recovery, postoperative, postanesthesia, scale, score, outpatient, and ambulatory. Eleven literature sources that contributed significantly to the research question were identified. Levels of evidence included three systematic reviews, one randomized controlled trial, three cohort studies, two case series, and two expert opinions. This integrative literature review revealed evidence-based discharge criteria endorsing home readiness for postanesthesia pediatric patients should incorporate consideration for physiological baselines, professional judgment with regard to infant consciousness, and professional practice standards/guidelines. Additionally, identifying and ensuring discharge to a competent adult was considered imperative. Nurses should be aware that frequently used anesthesia scoring systems originated in the 1970s, and this review was unable to locate current literature examining the reliability and validity of their use in conjunction with modern anesthesia-related health care practices. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  18. Relationship of Mobile Learning Readiness to Teacher Proficiency in Classroom Technology Integration

    Science.gov (United States)

    Christensen, Rhonda; Knezek, Gerald

    2016-01-01

    Mobile learning readiness as a new aspect of technology integration for classroom teachers is confirmed through the findings of this study to be significantly aligned with well-established measures based on older information technologies. The Mobile Learning Readiness Survey (MLRS) generally exhibits the desirable properties of step-wise increases…

  19. Is the RFID technology ready to integrate supplychain activities?

    OpenAIRE

    Chan, Hing Kai; Chan, Felix T.S.

    2008-01-01

    Radio Frequency Identification (RFID) is not a new technology andhas been introduced for military applications for a long time. Nevertheless, ithas been recognised as a device that may soon change the mode of operationsthroughout the supply chain. There is no question that the technology willreduce labour and improve accuracy in inventory management by improvinginventory visibility. However, a review of recent research and the developmentof RFID technology in supply chain related applications...

  20. Nuclear technology review 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-08-15

    The viability and credibility of a wide range of nuclear-based technologies require ready access to high-quality atomic, molecular and nuclear data. The demands of new nuclear technologies continue to determine the direction(s) of future data development, including the requirements for data that address innovative fuel cycles, accelerator-driven systems, nuclear incineration, fusion devices, diagnostic and therapeutic medical treatment by radiation, optimization of medical isotope production, non-destructive materials testing, radiation analytical techniques, minerals exploration and land-mine detection. Some recent data development projects with diverse applications are a search engine for Atomic and Molecular data to permit simultaneous data retrieval from a number of different sources for both numerical and bibliographic databases to aid designers. For over 50 years, research reactors have made valuable contributions to the development of nuclear power, basic science, materials development, radioisotope production for medicine and industry, and education and training. They remain core experimental instruments. As of June 2004, 672 research reactors are recorded in the IAEA's Research Reactor Data Base (RRDB), of which 274 are operational in 56 countries (85 in 39 developing countries), 214 are shut down, 168 have been decommissioned and 16 are planned or under construction. Nuclear power supplied 16% of global electricity generation in 2002, and as of 31 December 2003 there were 439 NPPs operating worldwide. Their global energy availability factor has risen steadily from 74.2% in 1991 to approximately 84% in 2003. In 2003 two new NPPs were connected to the grid, a 665 MW(e) pressurized heavy water reactor (PHWR) in China and a 960 MW(e) pressurized water reactor (PWR) in the Republic of Korea. In addition Canada restarted two units that had been shutdown. Construction started on one new NPP in India. Four 50 MW(e) units in the UK were retired, as were one 640 MW

  1. Nuclear technology review 2004

    International Nuclear Information System (INIS)

    2004-08-01

    The viability and credibility of a wide range of nuclear-based technologies require ready access to high-quality atomic, molecular and nuclear data. The demands of new nuclear technologies continue to determine the direction(s) of future data development, including the requirements for data that address innovative fuel cycles, accelerator-driven systems, nuclear incineration, fusion devices, diagnostic and therapeutic medical treatment by radiation, optimization of medical isotope production, non-destructive materials testing, radiation analytical techniques, minerals exploration and land-mine detection. Some recent data development projects with diverse applications are a search engine for Atomic and Molecular data to permit simultaneous data retrieval from a number of different sources for both numerical and bibliographic databases to aid designers. For over 50 years, research reactors have made valuable contributions to the development of nuclear power, basic science, materials development, radioisotope production for medicine and industry, and education and training. They remain core experimental instruments. As of June 2004, 672 research reactors are recorded in the IAEA's Research Reactor Data Base (RRDB), of which 274 are operational in 56 countries (85 in 39 developing countries), 214 are shut down, 168 have been decommissioned and 16 are planned or under construction. Nuclear power supplied 16% of global electricity generation in 2002, and as of 31 December 2003 there were 439 NPPs operating worldwide. Their global energy availability factor has risen steadily from 74.2% in 1991 to approximately 84% in 2003. In 2003 two new NPPs were connected to the grid, a 665 MW(e) pressurized heavy water reactor (PHWR) in China and a 960 MW(e) pressurized water reactor (PWR) in the Republic of Korea. In addition Canada restarted two units that had been shutdown. Construction started on one new NPP in India. Four 50 MW(e) units in the UK were retired, as were one 640 MW

  2. SEWGS Technology is Now Ready for Scale-up

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, D.; Van Selow, E.; Cobden, P. [Energy research Centre of the Netherlands ECN (Netherlands); Manzolini, G.; Macchi, E.; Gazzani, M. [Politecnico di Milano PTM, Dipartimento di Energia (Italy); Blom, R.; Henriksen, P.P. [SINTEF, Trondheim (Norway); Beavis, R. [BP Alternative Energy (United Kingdom); Wright, A. [Air products PLC (United Kingdom)

    2013-07-01

    In the FP7 project CAESAR, Air Products, BP, ECN, SINTEF and Politecnico di Milano worked together in the further development of the SEWGS process with the objective to reduce the energy penalty and the costs per ton of CO2 avoided to less than 25 euro through optimization of sorbent materials, reactor and process design and smart integration of the SEWGS unit in a combined cycle power plant. The most promising applications for the SEWGS technology are IGCC power plants and in combined cycles power plants fuelled with blast furnace top gas. Extensive sorbent development work resulted in a new sorbent called ALKASORB+ with a high capacity resulting in cost of CO2 avoided for the IGCC application of 23 euro. This is a reduction of almost 40% compared to the Selexol capture case. Since ALKASORB+ requires much less steam in the regeneration, the specific primary energy consumption is reduced to 44% below the specific energy consumption for the Selexol (2.08 versus 3.71 MJLHV/kgCO2). From a technical point of view SEWGS is ready to move to the next development level, which is a pilot plant installation with a capacity of 35 ton CO2 per day. This is over 500 times larger than the current ECN's multi column SEWGS installation, but still 50 times smaller than an envisaged commercial scale installation. The pilot plant will prove the technology under field conditions and at a sufficiently large scale to enable further up-scaling, delivering both the basic design and investment costs of a full scale SEWGS demonstration plant.

  3. Technology and Manufacturing Readiness of Early Market Motive and Non-Motive Hydrogen Storage Technologies for Fuel Cell Applications

    Energy Technology Data Exchange (ETDEWEB)

    Ronnebro, Ewa

    2012-06-16

    PNNL’s objective in this report is to provide DOE with a technology and manufacturing readiness assessment to identify hydrogen storage technologies’ maturity levels for early market motive and non-motive applications and to provide a path forward toward commercialization. PNNL’s Technology Readiness Assessment (TRA) is based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies in varying levels of development. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. The TRA report documents the process used to conduct the TRA, reports the TRL and MRL for each assessed technology and provides recommendations based on the findings.

  4. Decommissioning project readiness reviews at the Department of Energy's Hanford, Washington, Site

    International Nuclear Information System (INIS)

    Speer, D.R.; Holmes, P.A.

    1987-01-01

    Two Hanford Site contractors independently formulated readiness review methods to prepare for decontamination and decommissioning (D and D) projects. One readiness review method provided an independent management review process. The other method provided a review by personnel directly involved in the project and concise documentation procedures. A unified system is now used at Hanford which combines the best aspects of both readiness review methods. The unified method assigns category levels based on certain job characteristics. The category assigned to the project then indicates the required level of management review prior to proceeding with the D and D project. In addition, the concise documentation procedures are now used for all category levels

  5. The Sandia MEMS Passive Shock Sensor : FY08 testing for functionality, model validation, and technology readiness.

    Energy Technology Data Exchange (ETDEWEB)

    Walraven, Jeremy Allen; Blecke, Jill; Baker, Michael Sean; Clemens, Rebecca C.; Mitchell, John Anthony; Brake, Matthew Robert; Epp, David S.; Wittwer, Jonathan W.

    2008-10-01

    This report summarizes the functional, model validation, and technology readiness testing of the Sandia MEMS Passive Shock Sensor in FY08. Functional testing of a large number of revision 4 parts showed robust and consistent performance. Model validation testing helped tune the models to match data well and identified several areas for future investigation related to high frequency sensitivity and thermal effects. Finally, technology readiness testing demonstrated the integrated elements of the sensor under realistic environments.

  6. Technology readiness of partitioning and transmutation toward closed fuel cycle in Japan

    International Nuclear Information System (INIS)

    Ikeda, Kazumi; Kurata, Masaki; Morita, Yasuji; Tsujimoto, Kazufumi; Minato, Kazuo; Koyama, Shin-ichi

    2011-01-01

    This paper treats technology readiness level (TRL) assessment of Partitioning and Transmutation (P-T) toward closed fuel cycle in JAPAN. The purpose is providing clarified information related to the current maturity of the partitioning and transmutation technologies by applying the methodology of TRL, parallel to attempting to establish common indications among relating technology area. The methodology should be one of useful communication tools between specialists and management level, and also among countries interested in the P-T technologies. The generic TRL in this study is based on the GNEP (Global Nuclear Energy Partnership)'s definition: TRL 3 shows the status that critical function is proved and elemental technologies are identified, TRL 4 represents that relating technologies are validated at bench scale in laboratory environment, and TRL 5 achieves the completion of development related to the subsystem and elemental technologies. Detailed indications are established through discussion of the relating specialists. Reviewed technological area includes P-T and minor actinide (MA) cycle: Fast Breeder Reactor (FBR) and Accelerator driven system (ADS) for MA transmutation, partitioning processes, and MA-bearing fuels. The assessments reveal that TRL spreads around TRL 3 to TRL 4 because each system requires more the development of elemental technologies. Transmutation core of FBR is assessed to be TRL 4 in that MA bearing integral test is required additionally, and ADS becomes TRL 3 because the elemental technologies were identified and the requirements were specified. Consequently, the common key issue is how the nuclear calculation methodology will be validated for MA-bearing-fuelled core, since several percentages of MA changes the void reactivity and the Doppler Effect significantly, which are inherently important in reactor safety. It should be that critical experiments with several kg of americium or more are difficult in the existing experimental

  7. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    Directory of Open Access Journals (Sweden)

    Issham Ismail

    2013-01-01

    Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

  8. Sscience & technology review; Science Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

  9. Operational readiness review of the Low Level Waste vaults at Savannah River Site: A case study

    International Nuclear Information System (INIS)

    Ahmad, M.; McVay, C.; Venkatesh, S.

    1994-01-01

    Low Level radioactive Waste (LLW) at the Savannah River Site at Aiken, South Carolina, has traditionally been disposed of using engineered trenches in accordance with the guidelines and technology existing at the time. Recently, subgrade concrete vaults known as E-Area Vaults (EAV) have been constructed at SRS. The EAV project is a comprehensive effort for upgrading LLW disposal at SRS based on meeting the requirements of current Department of Energy (DOE) Orders, and addressing more stringent federal and state regulations. The EAV is a first of its kind state-of-the-art facility designed and built in the United States to receive LLW. Westinghouse Savannah River Company (WSRC) conducted an Operational Readiness Review (ORR) of the vaults prior to startup. The objective of the EAV ORR was to perform a comprehensive review of the operational readiness of the facilities per DOE guidelines including Defense Nuclear Facilities Safety Board (DNFSB) recommendations. This review included assessing construction of the vaults as per design, adequate approved procedures, and training of all the personnel associated with the facility operations. EAV ORR incorporated the lessons learned from other DOE ORRs, included DNFSB recommendations, used a graded approach, and utilized subject matter experts for each functional area of assessment

  10. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers.

  11. Energy and technology review

    International Nuclear Information System (INIS)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers

  12. Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

    Science.gov (United States)

    Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

  13. Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

    Science.gov (United States)

    Mueller, Crystal A.

    2009-01-01

    The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

  14. PENGARUH TECHNOLOGY READINESS TERHADAP PENERIMAAN TEKNOLOGI KOMPUTER PADA UMKM DI YOGYAKARTA

    Directory of Open Access Journals (Sweden)

    Mimin Nur Aisyah

    2014-10-01

    Full Text Available Abstrak: Pengaruh Technology Readiness terhadap Penerimaan Teknologi Komputer pada UMKM di Yogyakarta. Penelitian ini bertujuan untuk mengekplorasi pengaruh kesiapan teknologi terhadap persepsi kemanfaatan sistem dan persepsi kemudahan penggunaan sistem serta pengaruh kedua persepsi terhadap teknologi tersebut terhadap minat menggunakan teknologi komputer dalam membantu proses bisnis pada UMKM di Yogyakarta.  Sampel penelitian ini sejumlah 498 UMKM yang terdaftar di Disperindagkop Yogyakarta. Teknik pengambilan sampel menggunakan teknik simple random sampling. Data diperoleh menggunakan kuesioner. Analisis data dan uji hipotesis menggunakan model Partial-Least-Square (PLS. Penelitian ini menemukan bahwa terdapat pengaruh kesiapan teknologi terhadap persepsi kemanfaatan sistem dan persepsi kemudahan penggunaan sistem, serta terdapat pengaruh persepsi kemanfaatan teknologi dan persepsi kemudahan penggunaan teknologi terhadap minat menggunakan teknologi komputer dalam membantu proses bisnis pada UMKM di Yogyakarta.   Kata kunci: kesiapan teknologi, persepsi kemanfaatan, persepsi kemudahan penggunaan, minat menggunakan, UMKM Abstract: The Effect of Technology Readiness toward Acceptance of Computer Technology on SMEs in Yogyakarta. This research aims to explore the effect of technology readiness to the perceived of usefulness of system and perceived ease of use of the system and the influence of both perceptions of these technologies to the behavioral intention of computer technology in business processes in SMEs in Yogyakarta. The research sample number of 498 SMEs were registered in Disperindagkop Yogyakarta. The sampling technique using simple random sampling technique. The data were obtained using a questionnaire. Data analysis and hypothesis testing using a model of the Partial-Least-Square (PLS. The research found that there are significant technology readiness to the perception of the benefit system and perceived ease of use of the system

  15. Energy and technology review

    International Nuclear Information System (INIS)

    Quirk, W.J.; Bookless, W.A.

    1994-05-01

    The Lawrence Livermore National Laboratory, operated by the University of California for the United States Department of Energy, was established in 1952 to do research on nuclear weapons and magnetic fusion energy. Since then, in response to new national needs, we have added other major programs, including technology transfer, laser science (fusion, isotope separation, materials processing), biology and biotechnology, environmental research and remediation, arms control and nonproliferation, advanced defense technology, and applied energy technology. These programs, in turn, require research in basic scientific disciplines, including chemistry and materials science, computing science and technology, engineering, and physics. The Laboratory also carries out a variety of projects for other federal agencies. Energy and Technology Review is published monthly to report on unclassified work in all our programs. This issue reviews work performed in the areas of modified retoring for waste treatment and underground stripping to remove contamination

  16. Testing of technology readiness index model based on exploratory factor analysis approach

    Science.gov (United States)

    Ariani, AF; Napitupulu, D.; Jati, RK; Kadar, JA; Syafrullah, M.

    2018-04-01

    SMEs readiness in using ICT will determine the adoption of ICT in the future. This study aims to evaluate the model of technology readiness in order to apply the technology on SMEs. The model is tested to find if TRI model is relevant to measure ICT adoption, especially for SMEs in Indonesia. The research method used in this paper is survey to a group of SMEs in South Tangerang. The survey measures the readiness to adopt ICT based on four variables which is Optimism, Innovativeness, Discomfort, and Insecurity. Each variable contains several indicators to make sure the variable is measured thoroughly. The data collected through survey is analysed using factor analysis methodwith the help of SPSS software. The result of this study shows that TRI model gives more descendants on some indicators and variables. This result can be caused by SMEs owners’ knowledge is not homogeneous about either the technology that they are used, knowledge or the type of their business.

  17. Predictors of Osteopathic Medical Students' Readiness to Use Health Information Technology.

    Science.gov (United States)

    Jacobs, Robin J; Iqbal, Hassan; Rana, Arif M; Rana, Zaid; Kane, Michael N

    2017-12-01

    The advent of health information technology (HIT) tools can affect the practice of modern medicine in many ways, ideally by improving quality of care and efficiency and reducing medical errors. Future physicians will play a key role in the successful implementation of HIT. However, osteopathic medical students' willingness to learn, adopt, and use technology in a health care setting is not well understood. To understand osteopathic medical students' knowledge, attitudes, and behaviors regarding HIT and to identify factors that may be related to their readiness to use HIT. Using a cross-sectional approach, quantitative surveys were collected from students attending a large osteopathic medical school. Multivariate regression modeling was used to determine whether knowledge, attitudes, behaviors, and personal characteristics were associated with students' readiness to use HIT in future clinical practice. Six hundred four students responded to at least 70% of the survey and were included in the analysis. Multivariate modeling successfully explained the 26% of variance in predicting students' readiness to use HIT (F8,506=22.6, Ptechnology use, younger age, being male, and prior exposure to technology were associated with readiness to use HIT. Understanding students' level of HIT readiness may help guide medical education intervention efforts to better prepare future osteopathic physicians for HIT engagement and use. Innovative approaches to HIT education in medical school curricula that include biomedical informatics may be necessary.

  18. The Interplay of School Readiness and Teacher Readiness for Educational Technology Integration: A Structural Equation Model

    Science.gov (United States)

    Petko, Dominik; Prasse, Doreen; Cantieni, Andrea

    2018-01-01

    Decades of research have shown that technological change in schools depends on multiple interrelated factors. Structural equation models explaining the interplay of factors often suffer from high complexity and low coherence. To reduce complexity, a more robust structural equation model was built with data from a survey of 349 Swiss primary school…

  19. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    OpenAIRE

    Issham Ismail; Siti F Bokhare; Siti N Azizan; Nizuwan Azman

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach I...

  20. Review on technology II

    International Nuclear Information System (INIS)

    Mroziewicz, B.

    1986-01-01

    The most important requirements for the spectral properties of photodetectors are reviewed with particular attention to the fiber optics applications. Data on a number of materials are collected and presented. Pros and cons are pointed out for each type of photodetector-photoconductor, p-i-n photodiode and APD. A review is given of the relevant papers presented in the poster session 'Technology II' of the Symposium

  1. Timing Is everything: quantifying regulatory and market readiness levels for technology transition policy analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kobos, Peter Holmes [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Malczynski, Leonard A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Borns, David James [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-03-01

    People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and market acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’

  2. Operational readiness review for the Waste Experimental Reduction Facility. Final report

    International Nuclear Information System (INIS)

    1993-11-01

    An Operational Readiness Review (ORR) at the Idaho National Engineering Laboratory's (INEL's) Waste Experimental Reduction Facility (WERF) was conducted by EG ampersand G Idaho, Inc., to verify the readiness of WERF to resume operations following a shutdown and modification period of more than two years. It is the conclusion of the ORR Team that, pending satisfactory resolution of all pre-startup findings, WERF has achieved readiness to resume unrestricted operations within the approved safety basis. ORR appraisal forms are included in this report

  3. Early Childhood Teachers' Beliefs about Readiness for Teaching Science, Technology, Engineering, and Mathematics

    Science.gov (United States)

    Park, Mi-Hwa; Dimitrov, Dimiter M.; Patterson, Lynn G.; Park, Do-Yong

    2017-01-01

    The purpose of this study was to examine beliefs of early childhood teachers about their readiness for teaching science, technology, engineering, and mathematics, with a focus on testing for heterogeneity of such beliefs and differential effects of teacher-related factors. The results from latent class analysis of survey data revealed two latent…

  4. Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

    Science.gov (United States)

    Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

    2015-01-01

    Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate

  5. Readiness factors for lean implementation in healthcare settings--a literature review.

    Science.gov (United States)

    Al-Balushi, S; Sohal, A S; Singh, P J; Al Hajri, A; Al Farsi, Y M; Al Abri, R

    2014-01-01

    The purpose of this paper is to determine the readiness factors that are critical to the application and success of lean operating principles in healthcare organizations through a review of relevant literature. A comprehensive review of literature focussing on lean and lean healthcare was conducted. Leadership, organizational culture, communication, training, measurement, and reward systems are all commonly attributed readiness factors throughout general change management and lean literature. However, directly related to the successful implementation of lean in healthcare is that a setting is able to authorize a decentralized management style and undertake an end-to-end process view. These can be particularly difficult initiatives for complex organizations such as healthcare settings. The readiness factors identified are based on a review of the published literature. The external validity of the findings could be enhanced if tested using an empirical study. The readiness factors identified will enable healthcare practitioners to be better prepared as they begin their lean journeys. Sustainability of the lean initiative will be at stake if these readiness factors are not addressed. To the best of the knowledge, this is the first paper that provides a consolidated list of key lean readiness factors that can guide practice, as well as future theory and empirical research.

  6. Baby Boomers’ Adoption of Consumer Health Technologies: Survey on Readiness and Barriers

    OpenAIRE

    LeRouge, Cynthia; Van Slyke, Craig; Seale, Deborah; Wright, Kevin

    2014-01-01

    Background As they age, baby boomers (born 1946-1964) will have increasing medical needs and are likely to place large demand on health care resources. Consumer health technologies may help stem rising health care needs and costs by improving provider-to-patient communication, health monitoring, and information access and enabling self-care. Research has not explored the degree to which baby boomers are ready for, or are currently embracing, specific consumer health technologies This study ex...

  7. Supercapacitors specialities - Technology review

    Energy Technology Data Exchange (ETDEWEB)

    Münchgesang, Wolfram; Meisner, Patrick [Institut für Experimentelle Physik, Technische Universität Bergakademie Freiberg, Leipziger Straße 23, 09596 Freiberg (Germany); Yushin, Gleb [Georgia Institute of Technology, School of Materials Science and Engineering, Atlanta, GA 30326 (United States)

    2014-06-16

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance.

  8. Supercapacitors specialities - Technology review

    Science.gov (United States)

    Münchgesang, Wolfram; Meisner, Patrick; Yushin, Gleb

    2014-06-01

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance.

  9. Supercapacitors specialities - Technology review

    International Nuclear Information System (INIS)

    Münchgesang, Wolfram; Meisner, Patrick; Yushin, Gleb

    2014-01-01

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance

  10. Energy and technology review

    International Nuclear Information System (INIS)

    Brown, P.S.

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base

  11. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Brown, P.S. (ed.)

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base. (GHT)

  12. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  13. Development of the PRE-HIT instrument: patient readiness to engage in health information technology.

    Science.gov (United States)

    Koopman, Richelle J; Petroski, Gregory F; Canfield, Shannon M; Stuppy, Julie A; Mehr, David R

    2014-01-28

    Technology-based aids for lifestyle change are becoming more prevalent for chronic conditions. Important "digital divides" remain, as well as concerns about privacy, data security, and lack of motivation. Researchers need a way to characterize participants' readiness to use health technologies. To address this need, we created an instrument to measure patient readiness to engage with health technologies among adult patients with chronic conditions. Initial focus groups to determine domains, followed by item development and refinement, and exploratory factor analysis to determine final items and factor structure. The development sample included 200 patients with chronic conditions from 6 family medicine clinics. From 98 potential items, 53 best candidate items were examined using exploratory factor analysis. Pearson's Correlation for Test/Retest reliability at 3 months. The final instrument had 28 items that sorted into 8 factors with associated Cronbach's alpha: 1) Health Information Need (0.84), 2) Computer/Internet Experience (0.87), 3) Computer Anxiety (0.82), 4) Preferred Mode of Interaction (0.73), 5) Relationship with Doctor (0.65), 6) Cell Phone Expertise (0.75), 7) Internet Privacy (0.71), and 8) No News is Good News (0.57). Test-retest reliability for the 8 subscales ranged from (0.60 to 0.85). The Patient Readiness to Engage in Health Internet Technology (PRE-HIT) instrument has good psychometric properties and will be an aid to researchers investigating technology-based health interventions. Future work will examine predictive validity.

  14. Readiness review plan for the in situ vitrification demonstration of Seepage Pit 1 in Waste Area Grouping 7

    International Nuclear Information System (INIS)

    1995-05-01

    A treatability study is planned that encompasses the application of in situ vitrification (ISV) to at least two segments of the Oak Ridge National Laboratory Seepage Pit I during the third quarter of fiscal year 1995. Before the treatability study can be initiated, the proposed activity must be subjected to an Operational Readiness Review (ORR). ORR is a structured methodology of determining readiness to proceed as outlined in Martin Marietta Energy Systems, Inc. (Energy Systems), Environmental Restoration Waste Management Procedure ER/C-P1610, which provides Energy Systems organizations assurance that the work to be performed is consistent with management's expectations and that the subject activity is ready to proceed safely. The readiness review plan provides details of the review plan overview and the scope of work to be performed. The plan also identifies individuals and position responsibilities for implementing the activity. The management appointed Readiness Review Board (RRB) has been identified. A Field Readiness Review Team (FRT), a management appointed multidisciplinary group, has been established (1) to evaluate the ISV treatability study, (2) to identify and assemble supporting objective evidences of the readiness to proceed, and (3) to assist the team leader in presenting the evidences to the RRB. A major component of RRB is the formulation of readiness review criteria months before the operation. A comprehensive readiness review tree (a positive logic tree) is included, which identifies the activities required for the development of the readiness criteria. The readiness review tree serves as a tool to prevent the omission of an item that could affect system performance. All deficiencies identified in the review will be determined as prestart findings and must be resolved before the project is permitted to proceed. The final approval of the readiness to proceed will be the decision of RRB

  15. UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth A. Yackly

    2001-06-01

    The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every

  16. Utility advanced turbine systems (ATS) technology readiness testing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-15

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  17. Factors related to nursing students' readiness to enter working life - A scoping literature review.

    Science.gov (United States)

    Järvinen, Tiina; Eklöf, Niina; Salminen, Leena

    2018-03-01

    The aim of this scoping literature review was to identify the factors related to nursing students' readiness to enter working life. The literature search was carried out in autumn 2017 in PubMed and CINAHL databases. The studies selected for this review (n = 17) were analyzed thematically with inductive content analysis. Four subthemes that were combined into two main factors related to nursing students' readiness to enter working life were found. The main factors found were 1) educational factors and 2) personal factors. Educational factors consisted of professional competence and clinical practice, while personal factors consisted of nursing students' background and feelings. Some nursing students tend to feel insecure about entering working life as a newly graduated nurse. This literature review also supports the importance of clinical practice periods in nursing education and for readiness for working life. Nurse education needs to ensure clinical practice periods which support nursing students' professional growth. Further research is needed on how the factors related to nursing students' readiness to enter working life correlate with each other. Particularly, the association between competence, readiness and positive feelings towards graduation needs further investigation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-10-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

  19. Utility Advanced Turbine Systems (ATS) technology readiness testing

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted horn DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include fill speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  20. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-04-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer conflation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. The objective of this task is to design 7H and 9H compressor rotor and stator structures with the goal of achieving high efficiency at lower cost and greater durability by applying proven GE Power Systems (GEPS) heavy-duty use design practices. The designs will be based on the GE Aircraft Engines (GEAE) CF6-80C2 compressor. Transient and steady-state thermo-mechanical stress analyses will be run to ensure compliance with GEPS life standards. Drawings will be prepared for forgings, castings, machining, and instrumentation for full speed, no load (FSNL) tests of the first unit on both 9H and 7H applications.

  1. Sscience ampersand technology review

    International Nuclear Information System (INIS)

    1996-05-01

    This monthly science and technology review features a report about Lawrence Livermore National Laboratory work on an awesome, inevitable, unpredictable, and potentially dangerous natural phenomenon, lightning. This feature article tells of the development of guidance by Laboratory engineers on how to deal with the effects of lightning on Department of Energy facilities, especially those where nuclear and high explosive materials are handled and stored. Other topics are Groundwater Modeling: More Cost Effective Cleanup by Design, Dual- Band Infrared Computed Tomography: Searching for Hidden Defects, and Plating Shop Moves to Finish Off Waste

  2. Energy and technology review

    International Nuclear Information System (INIS)

    1983-10-01

    Three review articles are presented. The first describes the Lawrence Livermore Laboratory role in the research and development of oil-shale retorting technology through its studies of the relevant chemical and physical processes, mathematical models, and new retorting concepts. Second is a discussion of investigation of properties of dense molecular fluids at high pressures and temperatures to improve understanding of high-explosive behavior, giant-planet structure, and hydrodynamic shock interactions. Third, by totally computerizing the triple-quadrupole mass spectrometer system, the laboratory has produced a general-purpose instrument of unrivaled speed, selectivity, and adaptability for the analysis and identification of trace organic constituents in complex chemical mixtures

  3. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    Three review articles are presented. The first describes the Lawrence Livermore Laboratory role in the research and development of oil-shale retorting technology through its studies of the relevant chemical and physical processes, mathematical models, and new retorting concepts. Second is a discussion of investigation of properties of dense molecular fluids at high pressures and temperatures to improve understanding of high-explosive behavior, giant-planet structure, and hydrodynamic shock interactions. Third, by totally computerizing the triple-quadrupole mass spectrometer system, the laboratory has produced a general-purpose instrument of unrivaled speed, selectivity, and adaptability for the analysis and identification of trace organic constituents in complex chemical mixtures. (GHT)

  4. Sscience & technology review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This monthly science and technology review features a report about Lawrence Livermore National Laboratory work on an awesome, inevitable, unpredictable, and potentially dangerous natural phenomenon, lightning. This feature article tells of the development of guidance by Laboratory engineers on how to deal with the effects of lightning on Department of Energy facilities, especially those where nuclear and high explosive materials are handled and stored. Other topics are Groundwater Modeling: More Cost Effective Cleanup by Design, Dual- Band Infrared Computed Tomography: Searching for Hidden Defects, and Plating Shop Moves to Finish Off Waste.

  5. An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

    Science.gov (United States)

    Flynn, Michael

    2000-01-01

    This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

  6. Fleet Readiness Center - Southeast Technology Development Program (Cadmium & Hexavalent Chromium Reduction)

    Science.gov (United States)

    2014-11-01

    Fleet Readiness Center - Southeast TECHNOLOGY DEVELOPMENT PROGRAM (Cadmium & Hexavalent Chromium Reduction) Jack Benfer Senior Materials...Development Program (Cadmium & Hexavalent Chromium Reduction) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...Rinse Black Oxide Rinse CRES Passivation Chrome Plating Cadmium Plating Cadmium Brush Plating Class N (TRL 9) Class N (TRL 7) Class N (TRL 6

  7. Economic Feasibility and Market Readiness of Solar Technologies. Draft Final Report. Volume I.

    Energy Technology Data Exchange (ETDEWEB)

    Flaim, Silvio J.; Buchanan, Deborah L.; Christmas, Susan; Fellhauer, Cheryl; Glenn, Barbara; Ketels, Peter A.; Levary, Arnon; Mourning, Pete; Steggerda, Paul; Trivedi, Harit; Witholder, Robert E.

    1978-09-01

    Systems descriptions, costs, technical and market readiness assessments are reported for ten solar technologies: solar heating and cooling of buildings (SHACOB), passive, agricultural and industrial process heat (A/IPH), biomass, ocean thermal (OTEC), wind (WECS), solar thermal electric, photovoltaics, satellite power station (SPS), and solar total energy systems (STES). Study objectives, scope, and methods. are presented. of Joint Task The cost and market analyses portion 5213/6103 will be used to make commercialization assessments in the conclusions of. the final report.

  8. Operational Readiness Review Plan for the Radioisotope Thermoelectric Generator Materials Production Tasks

    Science.gov (United States)

    Cooper, R. H.; Martin, M. M.; Riggs, C. R.; Beatty, R. L.; Ohriner, E. K.; Escher, R. N.

    1990-04-19

    In October 1989, a US shuttle lifted off from Cape Kennedy carrying the spacecraft Galileo on its mission to Jupiter. In November 1990, a second spacecraft, Ulysses, will be launched from Cape Kennedy with a mission to study the polar regions of the sun. The prime source of power for both spacecraft is a series of radioisotope thermoelectric generators (RTGs), which use plutonium oxide (plutonia) as a heat source. Several of the key components in this power system are required to ensure the safety of both the public and the environment and were manufactured at Oak Ridge National Laboratory (ORNL) in the 1980 to 1983 period. For these two missions, Martin Marietta Energy Systems, Inc. (Energy Systems), will provide an iridium alloy component used to contain the plutonia heat source and a carbon composite material that serves as a thermal insulator. ORNL alone will continue to fabricate the carbon composite material. Because of the importance to DOE that Energy Systems deliver these high quality components on time, performance of an Operational Readiness Review (ORR) of these manufacturing activities is necessary. Energy Systems Policy GP 24 entitled "Operational Readiness Process" describes the formal and comprehensive process by which appropriate Energy Systems activities are to be reviewed to ensure their readiness. This Energy System policy is aimed at reducing the risks associated with mission success and requires a management approved "readiness plan" to be issued. This document is the readiness plan for the RTG materials production tasks.

  9. River Protection Project (RPP) Readiness-to-Proceed 2 Internal Independent Review Team Final Report

    International Nuclear Information System (INIS)

    SCHAUS, P.S.

    2000-01-01

    This report describes the results of an independent review team brought in to assess CH2M HILL Hanford's readiness and ability to support the RPP's move into its next major phase - retrieval and delivery of tank waste to the Privatization Contractor

  10. River Protection Project (RPP) Readiness-to-Proceed 2 Internal Independent Review Team Final Report

    International Nuclear Information System (INIS)

    SCHAUS, P.S.

    2000-01-01

    This report describes the results of an independent review team brought in to assess CH2M Hill Hanford Group's readiness and ability to support the RPP's move into its next major phase - retrieval and delivery of tank waste to the Privatization Contractor

  11. Effects of Ready-to-Eat-Cereals on Key Nutritional and Health Outcomes : A Systematic Review

    NARCIS (Netherlands)

    Priebe, Marion G.; McMonagle, Jolene R.

    2016-01-01

    Background In many countries breakfast cereals are an important component of breakfast. This systematic review assesses the contribution of consumption of ready-to eat cereal (RTEC) to the recommended nutrient intake. Furthermore, the effects of RTEC consumption on key health parameters are

  12. Phase V storage (Project W-112) Central Waste Complex operational readiness review, final report

    International Nuclear Information System (INIS)

    Wight, R.H.

    1997-01-01

    This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included

  13. Phase 5 storage (Project W-112) Central Waste Complex operational readiness review, final report

    Energy Technology Data Exchange (ETDEWEB)

    Wight, R.H.

    1997-05-30

    This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included.

  14. The Perceptions of Change and Change Readiness in Junior and Senior Engineering & Technology Students

    Science.gov (United States)

    Moler, Perry J.

    The purpose of this study was to understand what perceptions junior and senior engineering & technology students have about change, change readiness, and selected attributes, skills, and abilities. The selected attributes, skills, and abilities for this study were lifelong learning, leadership, and self-efficacy. The business environment of today is dynamic, with any number of internal and external events requiring an organization to adapt through the process of organizational development. Organizational developments affect businesses as a whole, but these developments are more evident in fields related to engineering and technology. Which require employees working through such developments be flexible and adaptable to a new professional environment. This study was an Explanatory Sequential Mixed Methods design, with Stage One being an online survey that collected individuals' perceptions of change, change readiness, and associated attributes, skills, and abilities. Stage Two was a face-to-face interview with a random sample of individuals who agreed to be interviewed in Stage One. This process was done to understand why students' perceptions are what they are. By using a mixed-method study, a more complete understanding of the current perceptions of students was developed, thus allowing external stakeholders' such as Human Resource managers more insight into the individuals they seek to recruit. The results from Stage One, one sample T-test with a predicted mean of 3.000 for this study indicated that engineering & technology students have a positive perceptions of Change Mean = 3.7024; Change Readiness Mean = 3.9313; Lifelong Learning Mean = 4.571; Leadership = 4.036; and Self-Efficacy Mean = 4.321. A One-way ANOVA was also conducted to understand the differences between traditional and non-traditional student regarding change and change readiness. The results of the ANOVA test indicated there were no significant differences between these two groups. The results

  15. Lessons Learned from Sandia National Laboratories' Operational Readiness Review of the Annular Core Research Reactor (ACRR)

    International Nuclear Information System (INIS)

    Bendure, Albert O.; Bryson, James W.

    1999-01-01

    The Sandia ACRR (a Hazard Category 2 Nuclear Reactor Facility) was defueled in June 1997 to modify the reactor core and control system to produce medical radioisotopes for the Department of Energy (DOE) Isotope Production Program. The DOE determined that an Operational Readiness Review (ORR) was required to confirm readiness to begin operations within the revised safety basis. This paper addresses the ORR Process, lessons learned from the Sandia and DOE ORRS of the ACRR, and the use of the ORR to confirm authorization basis implementation

  16. Nuclear technology review 2002

    International Nuclear Information System (INIS)

    2002-08-01

    The unifying theme of the Nuclear Technology Review 2002 (NTR-2002) is the importance of innovation. Innovation makes it possible to step beyond incremental evolutionary improvements constrained by diminishing returns. For crop production and public health, for example, the sterile insect technique created a whole new path for future improvements, distinctly different from applying ever larger amounts of pesticides. Nuclear techniques offer a new and safer approach to removing the world's estimated 60,000,000 abandoned land mines. New precision techniques create the potential for ever less intrusive and more effective radiation treatments for cancer. For nuclear power continuing innovation will be a key factor in closing the projection gap between long term global energy scenarios in which nuclear power expands substantially and near term scenarios with only modest expansion or even decline. While the NTR-2002 presents a worldwide review of the state-of-the-art of nuclear science and technology, and not an annual report on IAEA activities, it notes areas where the Agency has a particularly important role to play. Part I of the NTR-2002 'Fundamentals of Nuclear Development', reviews developments in the field of nuclear, atomic and molecular data. Research reactors remain essential to progress in nuclear science and technology. Part I reviews advances in radioisotope production, the use of accelerators and neutron activation analysis relevant to applications ranging from medicine particularly the light against cancer to industry. Part I also reviews developments in nuclear instrumentation and nuclear fusion, particularly in connection with the International Thermonuclear Experimental Reactor. Part II begins with a summary of nuclear power production in 2001. At the end of 2001 there were 438 nuclear power plants (NPPs) in operation, corresponding to a total capacity of 353 GW(e), more than 10000 reactor-years of cumulative operating experience and about 16% of global

  17. Recommendations for Tritium Science and Technology Research and Development in Support of the Tritium Readiness Campaign, TTP-7-084

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-10-30

    Between 2006 and 2012 the Tritium Readiness Campaign Development and Testing Program produced significant advances in the understanding of in-reactor TPBAR performance. Incorporating these data into existing TPBAR performance models has improved permeation predictions, and the discrepancy between predicted and observed tritium permeation in the WBN1 coolant has been decreased by about 30%. However, important differences between predicted and observed permeation still remain, and there are significant knowledge gaps that hinder the ability to reliably predict other aspects of TPBAR performance such as tritium distribution, component integrity, and performance margins. Based on recommendations from recent Tritium Readiness Campaign workshops and reviews coupled with technical and programmatic priorities, high-priority activities were identified to address knowledge gaps in the near- (3-5 year), middle- (5-10 year), and long-term (10+ year) time horizons. It is important to note that there are many aspects to a well-integrated research and development program. The intent is not to focus exclusively on one aspect or another, but to approach the program in a holistic fashion. Thus, in addition to small-scale tritium science studies, ex-reactor tritium technology experiments such as TMED, and large-scale in-reactor tritium technology experiments such as TMIST, a well-rounded research and development program must also include continued analysis of WBN1 performance data and post-irradiation examination of TPBARs and lead use assemblies to evaluate model improvements and compare separate-effects and integral component behavior.

  18. Getting America Ready for Japanese Science and Technology Held at Washington, DC on 7-8 February 1985.

    Science.gov (United States)

    1985-05-15

    includes an introduction to Japanese grammar, practice in elemen- tary conversation, thorough mastery of hiragana aia! katakana, an introduction to...7RD-RI57 599 GETTING AMERICA READY FOR JAPANESE SCIENCE AND 1/3IN ER ATIONAL CENTER FOR SCHOLARS WASHINGTONCNLG HEDA AHN U O D .. ILUNCRS IFID RA...GETTING AMERICA READY FOR JAPANESE SCIENCE AND TECHNOLOGY ___ yjL ASIA PROG3RAM OF THE WILSON CENTER THE MIT-.JAPAN SCIENCE AND TECHNOLOGY PROGRAM

  19. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Poggio, A.J. (ed.)

    1988-10-01

    This issue of Energy and Technology Review contains: Neutron Penumbral Imaging of Laser-Fusion Targets--using our new penumbral-imaging diagnostic, we have obtained the first images that can be used to measure directly the deuterium-tritium burn region in laser-driven fusion targets; Computed Tomography for Nondestructive Evaluation--various computed tomography systems and computational techniques are used in nondestructive evaluation; Three-Dimensional Image Analysis for Studying Nuclear Chromatin Structure--we have developed an optic-electronic system for acquiring cross-sectional views of cell nuclei, and computer codes to analyze these images and reconstruct the three-dimensional structures they represent; Imaging in the Nuclear Test Program--advanced techniques produce images of unprecedented detail and resolution from Nevada Test Site data; and Computational X-Ray Holography--visible-light experiments and numerically simulated holograms test our ideas about an x-ray microscope for biological research.

  20. Factors Affecting Nursing Students' Readiness and Perceptions Toward the Use of Mobile Technologies for Learning.

    Science.gov (United States)

    Zayim, Nese; Ozel, Deniz

    2015-10-01

    The purpose of this study was to determine the current usage of mobile devices, preferences of mobile learning environments and examine the readiness of nursing students in a public university. In order to investigate preferences and attitudes with respect to mobile technology use in nursing education, 387 students at a state university have been surveyed. It has been observed that while students preferred their current portable laptops, those in higher classes were more inclined to favor mobile phones. The common problems of battery life and high cost of communication, both in smartphones and tablet systems, suggest that hardware quality and financial constraints seem to be two main factors in determining these technologies. While more than half of students expressed readiness for mobile learning, one quarter indicated indecision. Through multivariate regression analysis, readiness to use mobile learning can be described in terms of perceived ease of use, perceived usefulness, personal innovativeness, self-management of learning, perceived device limitation, and availability. Class level, perceived ease of use, personal innovativeness, and self-management of learning explain intention to use mobile learning. Findings obtained from these results can provide guidance in the development and application of mobile learning systems.

  1. CORR Guidelines. Preparing and Conducting Review Missions of Construction Project Readiness for Nuclear Power Plants

    International Nuclear Information System (INIS)

    2013-01-01

    The construction readiness review (CORR) mission for nuclear power plant projects has been established with the aim of conducting peer reviews of construction projects related to nuclear power plants. Such a mission provides a detailed assessment of readiness for construction, construction progress, readiness for turnover, as well as recommendations for improvement. Organizations in Member States, such as nuclear utilities, owners, regulators and technical support organizations, can benefit from such reviews. A team of international experts with complementing specialities will conduct the CORR mission. The review is based on appropriate IAEA publications, such as IAEA Safety Standards Series Guides and IAEA Nuclear Energy Series publications, as well as on internationally recognized project and construction management guides. Mission findings are summarized in a mission report, which includes a list of recommendations, suggestions and identified good practices. The review is not intended to be a regulatory inspection or an audit against international codes and standards. Rather, it is a peer review aimed at improving implementation processes and procedures through an exchange of technical experiences and practices at the working level. The mission is applicable at any stage of a nuclear power plant construction project, although two specific phases are targeted: (1) start of construction mission (Phase 1 mission) and (2) an in-progress mission (Phase 2 mission). Missions are initiated when official requests are submitted by Member States through the appropriate IAEA channels

  2. Increment 23/24 Critical Readiness Review Health Maintenance System

    Science.gov (United States)

    Nieschwitz, Linda

    2010-01-01

    This slide presentation reviews the Health Maintenance System. It includes information on the carbon dioxide (CO2) and moisture removal system (CMRS), the variable oxygen system,rendevous station panels, and the crew contamination protection kit (CCPK).

  3. Readiness of ethics review systems for a changing public health landscape in the WHO African Region.

    Science.gov (United States)

    Motari, Marion; Ota, Martin Okechukwu; Kirigia, Joses Muthuri

    2015-12-02

    The increasing emphasis on research, development and innovation for health in providing solutions to the high burden of diseases in the African Region has warranted a proliferation of studies including clinical trials. This changing public health landscape requires that countries develop adequate ethics review capacities to protect and minimize risks to study participants. Therefore, this study assessed the readiness of national ethics committees to respond to challenges posed by a globalized biomedical research system which is constantly challenged by new public health threats, rapid scientific and technological advancements affecting biomedical research and development, delivery and manufacture of vaccines and therapies, and health technology transfer. This is a descriptive study, which used a questionnaire structured to elicit information on the existence of relevant national legal frameworks, mechanisms for ethical review; as well as capacity requirements for national ethics committees. The questionnaire was available in English and French and was sent to 41 of the then 46 Member States of the WHO African Region, excluding the five Lusophone Member States. Information was gathered from senior officials in ministries of health, who by virtue of their offices were considered to have expert knowledge of research ethics review systems in their respective countries. Thirty three of the 41 countries (80.5 %) responded. Thirty (90.9 %) of respondent countries had a national ethics review committee (NEC); 79 % of which were established by law. Twenty-five (83.3 %) NECs had secretarial and administrative support. Over 50 % of countries with NECs indicated a need for capacity strengthening through periodic training on international guidelines for health research (including clinical trials) ethics; and allocation of funds for administrative and secretariat support. Despite the existing training initiatives, the Region still experiences a shortage of professionals

  4. Results of readiness review for start of Title II Design of ESF in salt

    International Nuclear Information System (INIS)

    1986-01-01

    The Readiness Review Board recommends that the ESF Title II Design be initiated after approval of revised Functional Design Criteria for Title II design. This review was conducted assuming a Deaf Smith location for ESF. Seventy-four open items and eight technical holds were identified during the Readiness Review that must be addressed and resolved to ensure successful completion of the ESF Title II Design. These items include definition and approval of surface based, EDH, and subsurface testing requirements; development of an approved OCRWM/SRPO licensing position for the ESF; and acquisition and availability of site-specific confirmatory data. A Risk Assessment should be conducted to define corrective action data and technical, cost and schedule impacts and associated program risks of continuation of Title II design activities beyond those dates

  5. Comprehensive assessment of the status scientific and technical projects using Technology Project Readiness Level

    Directory of Open Access Journals (Sweden)

    A. N. Petrov

    2016-01-01

    Full Text Available The balanced methodology for assessing the Technology Project Readiness Level for commercialization (TPRL is proposed. TPRL allows to determine the dynamics and balance of development projects that use the standardized approaches used in assessing the readiness of the technology. Validation of the methodology undertaken for the projects of Federal target programs “Research and development on priority directions of development of scientific-technological complex of Russia for 2007–2013” and “Research and development on priority directions of development of scientific-technological complex of Russia for 2014–2020”. The obtained results showed the possibility of application of the methodology for the evaluation of projects, improving efficiency of expert activity in the evaluation of projects, monitoring the status of individual project and group of projects (portfolio. The application of the methodology allowed us to improve the management of individual project and portfolio of projects.Methodology TPRL will allow the implementers, industry partners, investors, and innovative industrial companies to improve the efficiency of its activities.

  6. Technology Readiness Level Assessment Process as Applied to NASA Earth Science Missions

    Science.gov (United States)

    Leete, Stephen J.; Romero, Raul A.; Dempsey, James A.; Carey, John P.; Cline, Helmut P.; Lively, Carey F.

    2015-01-01

    Technology assessments of fourteen science instruments were conducted within NASA using the NASA Technology Readiness Level (TRL) Metric. The instruments were part of three NASA Earth Science Decadal Survey missions in pre-formulation. The Earth Systematic Missions Program (ESMP) Systems Engineering Working Group (SEWG), composed of members of three NASA Centers, provided a newly modified electronic workbook to be completed, with instructions. Each instrument development team performed an internal assessment of its technology status, prepared an overview of its instrument, and completed the workbook with the results of its assessment. A team from the ESMP SEWG met with each instrument team and provided feedback. The instrument teams then reported through the Program Scientist for their respective missions to NASA's Earth Science Division (ESD) on technology readiness, taking the SEWG input into account. The instruments were found to have a range of TRL from 4 to 7. Lessons Learned are presented; however, due to the competition-sensitive nature of the assessments, the results for specific missions are not presented. The assessments were generally successful, and produced useful results for the agency. The SEWG team identified a number of potential improvements to the process. Particular focus was on ensuring traceability to guiding NASA documents, including the NASA Systems Engineering Handbook. The TRL Workbook has been substantially modified, and the revised workbook is described.

  7. In-Space Propulsion Technology Products Ready for Infusion on NASA's Future Science Missions

    Science.gov (United States)

    Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michele M.

    2012-01-01

    Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered. They have a broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine, providing higher performance for lower cost, was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models; and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, SMD Flagship, or technology demonstration missions.

  8. Readiness of hospitals affiliated with Shiraz university of medical sciences for implementation of radio frequency identification technology

    Directory of Open Access Journals (Sweden)

    Saeid Ebrahimi

    2015-10-01

    Full Text Available Introduction: Applying information technology in healthcare system is one of the most important criteria of the World Health Organization for evaluating the quality of healthcare systems of different countries. Moreover, applying this technology in different parts of health care system can create great potentials for improving the quality of healthcare services. In this regard, Radio Frequency Identification (RFID technology is one of the most practical technologies in identifying and collecting data. The present study aimed to compare the readiness of Shiraz University of medical sciences hospitals for implementation of RFID system in 2014. Method: This was a cross-sectional study conducted in 2014. The research population consisted of 110 senior and middle managers. Due to the limited research population, census method was used. The research tool was a questionnaire prepared by the researcher to investigate the hospitals’ readiness for implementation of RFID technology. Face and content validity of the questionnaire were approved by the experts. Cronbach’s alpha test was run to determine the reliability of the questionnaire (data were considered significant at p <0.05. Also, the data were analyzed in SPSS software using descriptive statistics (mean, standard deviation, and percentage and inferential statistics (one-way ANOVA. Results: The study showed that the readiness level of the hospitals was moderate. Comparing the mean of the total readiness level in the hospitals under the study revealed that there was a statistically significant difference between hospital M and other hospitals (P=0.003. However, the total readiness of hospital I was higher than others. Conclusion: Among 13 hospitals under the study, the hospitals I and A were moderately ready and others were not ready for implementation of RFID technology. Thus, considering various applications and advantages of RFID technology, it is suggested that the hospitals should prepare

  9. Critical Readiness Review EHS Water Quality and Microbiology

    Science.gov (United States)

    Woo, Cindy

    2010-01-01

    Presentation reviews the status in reference to the Environmental, Health and Safety (EHS) of the water quality and microbiology for the International Space Station. It includes information about crew training, hardware delivery, and those items that will be returned for study.

  10. Readiness Review Plan for the Interim Remedial Action on Surface Debris in Waste Area Grouping 11 at Oak Ridge National Laboratory, Oak Ridge, TN

    International Nuclear Information System (INIS)

    1993-10-01

    This Readiness Review Plan was prepared by the Waste Area Grouping (WAG) 11 Site Project Readiness Review Team as an overview of the Interim Remedial Action on Surface Debris in WAG 11 project at Oak Ridge National Laboratory, including major readiness milestones, criteria development methodology, and a list of events to occur as part of the review process for determining readiness for each project phase

  11. Current state of micro-robots/devices as substitutes for screening colonoscopy: assessment based on technology readiness levels.

    Science.gov (United States)

    Tapia-Siles, Silvia C; Coleman, Stuart; Cuschieri, Alfred

    2016-02-01

    Previous reports have described several candidates, which have the potential to replace colonoscopy, but to date, there is still no device capable of fully replacing flexible colonoscopy in the management of colonic disorders and for mass adult population screening for asymptomatic colorectal cancer. NASA developed the TRL methodology to describe and define the stages of development before use and marketing of any device. The definitions of the TRLS used in the present review are those formulated by "The US Department of Defense Technology Readiness Assessment Guidance" but adapted to micro-robots for colonoscopy. All the devices included are reported in scientific literature. They were identified by a systematic search in Web of Science, PubMed and IEEE Xplore amongst other sources. Devices that clearly lack the potential for full replacement of flexible colonoscopy were excluded. The technological salient features of all the devices included for assessment are described briefly, with particular focus on device propulsion. The devices are classified according to the TRL criteria based on the reported information. An analysis is next undertaken of the characteristics and salient features of the devices included in the review: wireless/tethered devices, data storage-transmission and navigation, additional functionality, residual technology challenges and clinical and socio-economical needs. Few devices currently possess the required functionality and performance to replace the conventional colonoscopy. The requirements, including functionalities which favour the development of a micro-robot platform to replace colonoscopy, are highlighted.

  12. Biodiesel production technologies: review

    Directory of Open Access Journals (Sweden)

    Shemelis Nigatu Gebremariam

    2017-05-01

    Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

  13. Operational Readiness Review Final Report For F-Canyon Restart. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    McFarlane, A.F.; Spangler, J.B.

    1995-04-05

    An independent WSRC Operational Readiness Review was performed for the restart of Phase 1 processing in F-Canyon, Building 221-F. Readiness to restart the Second Plutonium Cycle process and solvent recovery was assessed. The ORR was conducted by an ORR board of ten members with the support of a subject matter expert. The chairman and four members were drawn from the Operational Safety Evaluation Department, ESH& QA Division; additional members were drawn from other WSRC divisions, independent of the F-Canyon operating division (NMPD). Based on the results of the readiness verification assessments performed according to the ORR plan and the validation of pre-restart corrective actions, the WSRC independent ORR Board has concluded that the facility has achieved the state of readiness committed to in the Restart Plan. Also, based on the scope of the ORR, it is the opinion of the board that F-Canyon Phase 1 processes can be restarted without undue risk to the safety of the public and onsite workers and without undue risk to the environment.

  14. Operational Readiness Review Final Report For F-Canyon Restart. Phase 1

    International Nuclear Information System (INIS)

    McFarlane, A.F.; Spangler, J.B.

    1995-01-01

    An independent WSRC Operational Readiness Review was performed for the restart of Phase 1 processing in F-Canyon, Building 221-F. Readiness to restart the Second Plutonium Cycle process and solvent recovery was assessed. The ORR was conducted by an ORR board of ten members with the support of a subject matter expert. The chairman and four members were drawn from the Operational Safety Evaluation Department, ESH ampersand QA Division; additional members were drawn from other WSRC divisions, independent of the F-Canyon operating division (NMPD). Based on the results of the readiness verification assessments performed according to the ORR plan and the validation of pre-restart corrective actions, the WSRC independent ORR Board has concluded that the facility has achieved the state of readiness committed to in the Restart Plan. Also, based on the scope of the ORR, it is the opinion of the board that F-Canyon Phase 1 processes can be restarted without undue risk to the safety of the public and onsite workers and without undue risk to the environment

  15. Organizational readiness for knowledge translation in chronic care: a review of theoretical components

    Science.gov (United States)

    2013-01-01

    Background With the persistent gaps between research and practice in healthcare systems, knowledge translation (KT) has gained significance and importance. Also, in most industrialized countries, there is an increasing emphasis on managing chronic health conditions with the best available evidence. Yet, organizations aiming to improve chronic care (CC) require an adequate level of organizational readiness (OR) for KT. Objectives: The purpose of this study is to review and synthesize the existing evidence on conceptual models/frameworks of Organizational Readiness for Change (ORC) in healthcare as the basis for the development of a comprehensive framework of OR for KT in the context of CC. Data sources We conducted a systematic review of the literature on OR for KT in CC using Pubmed, Embase, CINAHL, PsychINFO, Web of Sciences (SCI and SSCI), and others. Search terms included readiness; commitment and change; preparedness; willing to change; organization and administration; and health and social services. Study selection: The search was limited to studies that had been published between the starting date of each bibliographic database (e.g., 1964 for PubMed) and November 1, 2012. Only papers that refer to a theory, a theoretical component from any framework or model on OR that were applicable to the healthcare domain were considered. We analyzed data using conceptual mapping. Data extraction: Pairs of authors independently screened the published literature by reviewing their titles and abstracts. Then, the two same reviewers appraised the full text of each study independently. Results Overall, we found and synthesized 10 theories, theoretical models and conceptual frameworks relevant to ORC in healthcare described in 38 publications. We identified five core concepts, namely organizational dynamics, change process, innovation readiness, institutional readiness, and personal readiness. We extracted 17 dimensions and 59 sub-dimensions related to these 5 concepts

  16. Organizational readiness for knowledge translation in chronic care: a review of theoretical components.

    Science.gov (United States)

    Attieh, Randa; Gagnon, Marie-Pierre; Estabrooks, Carole A; Légaré, France; Ouimet, Mathieu; Roch, Geneviève; Ghandour, El Kebir; Grimshaw, Jeremy

    2013-11-28

    With the persistent gaps between research and practice in healthcare systems, knowledge translation (KT) has gained significance and importance. Also, in most industrialized countries, there is an increasing emphasis on managing chronic health conditions with the best available evidence. Yet, organizations aiming to improve chronic care (CC) require an adequate level of organizational readiness (OR) for KT. The purpose of this study is to review and synthesize the existing evidence on conceptual models/frameworks of Organizational Readiness for Change (ORC) in healthcare as the basis for the development of a comprehensive framework of OR for KT in the context of CC. We conducted a systematic review of the literature on OR for KT in CC using Pubmed, Embase, CINAHL, PsychINFO, Web of Sciences (SCI and SSCI), and others. Search terms included readiness; commitment and change; preparedness; willing to change; organization and administration; and health and social services. The search was limited to studies that had been published between the starting date of each bibliographic database (e.g., 1964 for PubMed) and November 1, 2012. Only papers that refer to a theory, a theoretical component from any framework or model on OR that were applicable to the healthcare domain were considered. We analyzed data using conceptual mapping. Pairs of authors independently screened the published literature by reviewing their titles and abstracts. Then, the two same reviewers appraised the full text of each study independently. Overall, we found and synthesized 10 theories, theoretical models and conceptual frameworks relevant to ORC in healthcare described in 38 publications. We identified five core concepts, namely organizational dynamics, change process, innovation readiness, institutional readiness, and personal readiness. We extracted 17 dimensions and 59 sub-dimensions related to these 5 concepts. Our findings provide a useful overview for researchers interested in ORC and aims

  17. Operational Readiness Review Final Report for K Basin Fuel Transfer System

    International Nuclear Information System (INIS)

    DAVIES, T.H.

    2002-01-01

    An Operational Readiness Review (ORR) was conducted by the U.S. Department of Energy (DOE), Richland Operations Office (RL) to verify that an adequate state of readiness had been achieved for startup of the K Basin Fuel Transfer System (FTS). The DOE ORR was conducted during the period November 6-18, 2002. The DOE ORR team concluded that the K Basin Fuel Transfer System is ready to start operations, subject to completion and verification of identified pre-start findings. The ORR was conducted in accordance with the Spent Nuclear Fuel (SNF) K Basin Fuel Transfer System (FTS) Operational Readiness Review (ORR) Plan of Action and the Operational Readiness Review Implementation Plan for K Basin Fuel Transfer System. Review activities consisted of staff interviews, procedure and document reviews, and observations of normal facility operations, operational upset conditions, and an emergency drill. The DOE ORR Team also reviewed and assessed the adequacy of the contractor ORR3 and the RL line management review. The team concurred with the findings and observations identified in these two reports. The DOE ORR for the FTS evaluated the contractor under single-shift operations. Of concern to the ORR Team was that SNF Project management intended to change from a single-shift FTS operation to a two-shift operation shortly after the completion of the DOE ORR. The ORR team did not assess two-shift FTS operations and the ability of the contractor to conduct a smooth transition from shift to shift. However, the DOE ORR team did observe an operational upset drill that was conducted during day shift and carried over into swing shift; during this drill, swing shift was staffed with fewer personnel as would be expected for two-shift operations. The facility was able to adequately respond to the event with the reduced level of staff. The ORR Team was also able to observe a Shift Manager turnover meeting when one shift manager had to be relieved during the middle of the day. The ORR

  18. Systematic review automation technologies

    Science.gov (United States)

    2014-01-01

    Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects. We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time. PMID:25005128

  19. Department of Energy Operational Readiness Review for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-12-01

    The U.S. Department of Energy (DOE) has completed an Operational Readiness Review (ORR) for the restart of Contact Handled (CH) waste emplacement at the Waste Isolation Pilot Plant (WIPP) located near Carlsbad, New Mexico. The ORR team assessed the readiness of Nuclear Waste Partnership, LLC (NWP) to manage and perform receipt through CH waste emplacement, and associated waste handling and management activities, including the ability of the National TRU Program (NTP) to evaluate the waste currently stored at the WIPP site against the revised and enhanced Waste Acceptance Criteria (WAC). Field work for this review began on November 14, 2015 and was completed on November 30, 2016. The DOE ORR was conducted in accordance with the Department of Energy Operational Readiness Review Implementation Plan for the Waste Isolation Pilot Plant, dated November 8, 2016, and DOE Order 425.1D, Verification of Readiness to Start Up or Restart Nuclear Facilities. The review activities included personnel interviews, record reviews, direct observation of operations and maintenance demonstrations, and observation of multiple operational and emergency drills/exercises. The DOE ORR also evaluated the adequacy of the contractor’s ORR (CORR) and the readiness of the DOE Carlsbad field Office (CBFO) to oversee the startup and execution of CH waste emplacement activities at the WIPP facility. The WIPP facility is categorized as a Hazard Category 2 DOE Nonreactor Nuclear Facility for all surface and Underground (UG) operations per DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports. In addition, the WIPP experienced two events in February, 2014 that resulted in Accident Investigations being performed in accordance with the requirements of DOE Order 225.1B, Accident Investigations. Based upon the results of the accident investigations and hazard categorization of the facility, the team placed

  20. Science & Technology Review September 2017

    Energy Technology Data Exchange (ETDEWEB)

    Duoss, Eric B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, Paul R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-08-16

    This is the September 2017 edition of the LLNL, Science and Technology Review. At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  1. Demand Response Technology Readiness Levels for Energy Management in Blocks of Buildings

    Directory of Open Access Journals (Sweden)

    Tracey Crosbie

    2018-01-01

    Full Text Available Fossil fuels deliver most of the flexibility in contemporary electricity systems. The pressing need to reduce CO2 emissions requires new methods to provide this flexibility. Demand response (DR offers consumers a significant role in the delivery of flexibility by reducing or shifting their electricity usage during periods of stress or constraint. Blocks of buildings offer more flexibility in the timing and use of energy than single buildings, however, and a lack of relevant scalable ICT tools hampers DR in blocks of buildings. To ameliorate this problem, a current innovation project called “Demand Response in Blocks of Buildings” (DR-BoB: www.dr-bob.eu has integrated existing technologies into a scalable cloud-based solution for DR in blocks of buildings. The degree to which the DR-BoB energy management solution can increase the ability of any given site to participate in DR is dependent upon its current energy systems, i.e., the energy metering, the telemetry and control technologies in building management systems, and the existence/capacity of local power generation and storage plants. To encourage the owners and managers of blocks of buildings to participate in DR, a method of assessing and validating the technological readiness to participate in DR energy management solutions at any given site is required. This paper describes the DR-BoB energy management solution and outlines what we have called the demand response technology readiness levels (DRTRLs for the implementation of such a solution in blocks of buildings.

  2. Technology Readiness and E-Commerce Adoption among Entrepreneurs of SMEs in Bandung City, Indonesia

    Directory of Open Access Journals (Sweden)

    Novika Candra Astuti

    2014-02-01

    Full Text Available The emergence of internet-based electronic commerce offers considerable opportunities for companies to expand their customer base, enter new product markets, and rationalize their business. The Indonesian government has initiated and implemented a series of plans and activities to promote technology use to increase SMEs’ performance. Despite such efforts, technology adoption rate are still low. Therefore, it is important to understand the factors affecting an entrepreneurs’ decision on internet adoption, by measuring technology readiness (TR. The purpose of this study is to investigate TR and the extent to which E-commerce is adopted amongst entrepreneurs. This study is replication of Parasuraman’s study on the Technology Readiness Index (TRI. Questionnaires were distributed using a convenience sampling method to 190 entrepreneurs of SME in Bandung city. The findings indicate that entrepreneurs are moderate in terms of their TR. There are significant differences in terms of TR across entrepreneurs’ backgrounds (gender, age, education, and income. In relation to internet adoption by those surveyed, as their use of media promotion is still low, there were only 36.3 percent who adopted it. The results clearly indicate the need to provide support to SMEs to adopt and use e-commerce. These results have implications not only for managers of SMEs but also for government agencies in developing countries such as Indonesia. The findings have implications for researchers and practitioners by identifying TR drivers (optimism and innovativeness, and barriers (discomfort and insecurity, that contribute to effectively leveraging the Internet in an important area for SMEs.

  3. Magnetic fusion: Environmental Readiness Document

    International Nuclear Information System (INIS)

    1981-03-01

    Environmental Readiness Documents are prepared periodically to review and evaluate the environmental status of an energy technology during the several phases of development of that technology. Through these documents, the Office of Environment within the Department of Energy provides an independent and objective assessment of the environmental risks and potential impacts associated with the progression of the technology to the next stage of development and with future extensive use of the technology. This Environmental Readiness Document was prepared to assist the Department of Energy in evaluating the readiness of magnetic fusion technology with respect to environmental issues. An effort has been made to identify potential environmental problems that may be encountered based upon current knowledge, proposed and possible new environmental regulations, and the uncertainties inherent in planned environmental research

  4. Energy and technology review

    International Nuclear Information System (INIS)

    1981-10-01

    Research is described in three areas, high-technology design of unconventional, nonnuclear weapons, a model for analyzing special nuclear materials safeguards decisions, and a nuclear weapons accident exercise (NUWAX-81)

  5. The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

    Directory of Open Access Journals (Sweden)

    Asuman Atilla

    2015-06-01

    Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

  6. Nuclear Technology Review 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-08-15

    The year 2006 saw increasing activities in the field of nuclear power. Significant plans for expansion were announced in some countries and plans for introducing nuclear power in some others. The year began with announcements by both the Russian Federation and the United States of America of international fuel cycle proposals in anticipation of a substantial expansion of nuclear power worldwide. In January, Russian President Vladimir Putin outlined a proposal to create 'a system of international centres providing nuclear fuel cycle services, including enrichment, on a non-discriminatory basis and under the control of the IAEA'. In February, the USA proposed a Global Nuclear Energy Partnership to develop advanced recycling technologies that would not separate pure plutonium; international collaboration in supplying fuel for States which agree not to pursue enrichment and reprocessing; advanced reactors to consume recycled spent fuel while providing energy; and safe and secure small reactors suited to the needs of developing countries. New medium-term projections by the IAEA and the International Energy Agency present a picture with opportunities for substantial nuclear expansion, but still with notable uncertainty. A number of countries have announced plans for significant expansion: China, India, Japan, Pakistan, the Russian Federation and the Republic of Korea. Announcements of planned license applications by US companies and consortia mentioned approximately 25 new reactors. Two site preparation applications were submitted in Canada. A major energy review by the United Kingdom concluded that new nuclear power stations would make a significant contribution to meeting the UK's energy policy goals. Utilities from Estonia, Lithuania and Latvia launched a joint feasibility study of a new nuclear power plant to serve all three countries, and Belarus, Egypt, Indonesia, Nigeria and Turkey made announcements of steps they are taking toward their first nuclear power plants

  7. Nuclear Technology Review 2007

    International Nuclear Information System (INIS)

    2007-08-01

    The year 2006 saw increasing activities in the field of nuclear power. Significant plans for expansion were announced in some countries and plans for introducing nuclear power in some others. The year began with announcements by both the Russian Federation and the United States of America of international fuel cycle proposals in anticipation of a substantial expansion of nuclear power worldwide. In January, Russian President Vladimir Putin outlined a proposal to create 'a system of international centres providing nuclear fuel cycle services, including enrichment, on a non-discriminatory basis and under the control of the IAEA'. In February, the USA proposed a Global Nuclear Energy Partnership to develop advanced recycling technologies that would not separate pure plutonium; international collaboration in supplying fuel for States which agree not to pursue enrichment and reprocessing; advanced reactors to consume recycled spent fuel while providing energy; and safe and secure small reactors suited to the needs of developing countries. New medium-term projections by the IAEA and the International Energy Agency present a picture with opportunities for substantial nuclear expansion, but still with notable uncertainty. A number of countries have announced plans for significant expansion: China, India, Japan, Pakistan, the Russian Federation and the Republic of Korea. Announcements of planned license applications by US companies and consortia mentioned approximately 25 new reactors. Two site preparation applications were submitted in Canada. A major energy review by the United Kingdom concluded that new nuclear power stations would make a significant contribution to meeting the UK's energy policy goals. Utilities from Estonia, Lithuania and Latvia launched a joint feasibility study of a new nuclear power plant to serve all three countries, and Belarus, Egypt, Indonesia, Nigeria and Turkey made announcements of steps they are taking toward their first nuclear power plants

  8. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O' Neal, E.; Van Dyke, P. (eds.)

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

  9. Energy and technology review

    International Nuclear Information System (INIS)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P.

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs

  10. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Bookless, W.A.; McElroy, L.; Wheatcraft, D.; Middleton, C.; Shang, S. [eds.

    1994-10-01

    Two articles are included: the industrial computing initiative, and artificial hip joints (applying weapons expertise to medical technology). Three research highlights (briefs) are included: KEN project (face recognition), modeling groundwater flow and chemical migration, and gas and oil national information infrastructure.

  11. Energy and Technology Review

    International Nuclear Information System (INIS)

    Bookless, W.A.; McElroy, L.; Wheatcraft, D.; Middleton, C.; Shang, S.

    1994-10-01

    Two articles are included: the industrial computing initiative, and artificial hip joints (applying weapons expertise to medical technology). Three research highlights (briefs) are included: KEN project (face recognition), modeling groundwater flow and chemical migration, and gas and oil national information infrastructure

  12. Energy and technology review

    International Nuclear Information System (INIS)

    Carr, R.B.; McCleb, C.S.; Prono, J.K.

    1976-01-01

    Brief discussions of research progress on the following topics are given: (1) lasers and laser applications, (2) advanced energy systems, (3) science and technology, and (4) national security. Some experiments on the in-flight laser irradiation of ammonia pellets are discussed

  13. Assessment of Technology Readiness Level of a Carbon Dioxide Reduction Assembly (CRA) for use on International Space Station

    Science.gov (United States)

    Murdoch, Karen; Smith, Fred; Perry, Jay; Green, Steve

    2004-01-01

    When technologies are traded for incorporation into vehicle systems to support a specific mission scenario, they are often assessed in terms of Technology Readiness Level (TRL). TRL is based on three major categories of Core Technology Components, Ancillary Hardware and System Maturity, and Control and Control Integration. This paper describes the Technology Readiness Level assessment of the Carbon Dioxide Reduction Assembly (CRA) for use on the International Space Station. A team comprising of the NASA Johnson Space Center, Marshall Space Flight Center, Southwest Research Institute and Hamilton Sundstrand Space Systems International have been working on various aspects of the CRA to bring its TRL from 4/5 up to 6. This paper describes the work currently being done in the three major categories. Specific details are given on technology development of the Core Technology Components including the reactor, phase separator and CO2 compressor.

  14. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    This is the first of two issues commemorating the 30th anniversary of the Lawrence Livermore National Laboratory. The early history of the laboratory is reviewed, including: the LLNL-Nevada organization; project Plowshare; the chemistry and materials science department; and development of computer systems. (GHT)

  15. Energy and Technology Review

    International Nuclear Information System (INIS)

    1982-09-01

    This is the first of two issues commemorating the 30th anniversary of the Lawrence Livermore National Laboratory. The early history of the laboratory is reviewed, including: the LLNL-Nevada organization; project Plowshare; the chemistry and materials science department; and development of computer systems

  16. Energy and technology review

    International Nuclear Information System (INIS)

    1981-05-01

    Research programs at LLNL are reviewed. This issue discusses validation of the pulsed-power design for FXR, the NOVA plasma shutter, thermal control of the MFTF superconducting magnet, a low-energy x-ray spectrometer for pulsed-source diagnostics, micromachining, the electronics engineer's design station, and brazing with a laser microtorch

  17. Operational readiness review implementation plan for K Basin sludge water system

    International Nuclear Information System (INIS)

    IRWIN, R.M.

    2003-01-01

    This Implementation Plan (IP) has been prepared consistent with the requirements of U.S. Department of Energy (DOE) Order 425.1B, ''Startup and Restart of Nuclear Facilities'', and DOE-STD-3006-2000, ''Planning and Conduct of Operational Readiness Reviews'' (ORR) (DOE 2002). The scope of the DOE ORR is described in the RL ''Plan of Action, K Basin Sludge Water System'' (Veitenheimer 2003), prepared by DOE project line management and approved by the RL Manager, the designated Approval Authority, on March 20, 2003. The scope of the contractor ORR is described in the contractor ''Plan of Action for the K Basins Sludge Water System Operational Readiness Review'' (FH 2002a) which was prepared by Spent Nuclear Fuel (SNF) Project line management and approved by the DOE Richland Operations Office (RL) Manager on December 19, 2002. DOE Order 425.1B indicates that the Secretarial Officer is the Authorization Authority when substantial modifications are made to a Hazard Category 2 nuclear facility. This Authorization Authority has been delegated to the RL Manager by memorandum from Jessie Hill Roberson, dated February 5, 2003 (Roberson 2003). This IP provides the overall approach and guidelines for performance of the DOE ORR. Appendix A contains the Criteria and Review Approach Documents (CRAD), which define the review objectives and criteria as well as the approach for assessing each objective. ORR results will be published in a final report, as discussed in Section 9.4

  18. Philosophy of technology: a review

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, F.

    1985-06-01

    The continuous technological progress since the beginning of the Industrial Revolution seemed to confirm the Rationalists and the optimism of the Age of Enlightenment. This is no longer so. In this review new lines of inquiry into this change are discussed, and various philosophical features and traditions are explored. It proves difficult to define technology; the philosophy of science and its methodology are considered, mind and machines are contrasted, and the review concludes with a consideration of the arguments put forward for metaphysical interpretations of technology.

  19. Energy and technology review

    International Nuclear Information System (INIS)

    1982-08-01

    Three areas of research are discussed: microcomputer technology applied to inspecting machined parts to determine roundness in ultraprecision measurements; development of an electrolytic technique for preparing dinitrogen pentoxide as a potentially less expensive step in the large-scale synthesis of the explosive HMX; and the application of frequency conversion to short wavelengths in the Novette and Nova lasers to improve the performance of inertial-confinement fusion targets

  20. Review of encapsulation technologies

    International Nuclear Information System (INIS)

    Shaulis, L.

    1996-09-01

    The use of encapsulation technology to produce a compliant waste form is an outgrowth from existing polymer industry technology and applications. During the past 12 years, the Department of Energy (DOE) has been researching the use of this technology to treat mixed wastes (i.e., containing hazardous and radioactive wastes). The two primary encapsulation techniques are microencapsulation and macroencapsulation. Microencapsulation is the thorough mixing of a binding agent with a powdered waste, such as incinerator ash. Macroencapsulation coats the surface of bulk wastes, such as lead debris. Cement, modified cement, and polyethylene are the binding agents which have been researched the most. Cement and modified cement have been the most commonly used binding agents to date. However, recent research conducted by DOE laboratories have shown that polyethylene is more durable and cost effective than cements. The compressive strength, leachability, resistance to chemical degradation, etc., of polyethylene is significantly greater than that of cement and modified cement. Because higher waste loads can be used with polyethylene encapsulant, the total cost of polyethylene encapsulation is significantly less costly than cement treatment. The only research lacking in the assessment of polyethylene encapsulation treatment for mixed wastes is pilot and full-scale testing with actual waste materials. To date, only simulated wastes have been tested. The Rocky Flats Environmental Technology Site had planned to conduct pilot studies using actual wastes during 1996. This experiment should provide similar results to the previous tests that used simulated wastes. If this hypothesis is validated as anticipated, it will be clear that polyethylene encapsulation should be pursued by DOE to produce compliant waste forms

  1. Energy and technology review

    International Nuclear Information System (INIS)

    Carr, R.B.; Bathgate, M.B.; Crawford, R.B.; McCaleb, C.S.; Prono, J.K.

    1976-05-01

    The chief objective of LLL's biomedical and environmental research program is to enlarge mankind's understanding of the implications of energy-related chemical and radioactive effluents in the biosphere. The effluents are studied at their sources, during transport through the environment, and at impact on critical resources, important ecosystems, and man himself. We are pursuing several projects to acquire such knowledge in time to guide the development of energy technologies toward safe, reasonable, and optimal choices

  2. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Bathgate, M.B.; Crawford, R.B.; McCaleb, C.S.; Prono, J.K. (eds.)

    1976-05-01

    The chief objective of LLL's biomedical and environmental research program is to enlarge mankind's understanding of the implications of energy-related chemical and radioactive effluents in the biosphere. The effluents are studied at their sources, during transport through the environment, and at impact on critical resources, important ecosystems, and man himself. We are pursuing several projects to acquire such knowledge in time to guide the development of energy technologies toward safe, reasonable, and optimal choices.

  3. Technological Readiness of UiTM students in Using Mobile Phones in their English Language Classroom

    Directory of Open Access Journals (Sweden)

    Agelyia a/p Murugan

    2017-04-01

    Full Text Available Mobile Assisted Language Learning (MALL by using devices such as mobile phones is an ideal learning platform for learners to acquire language and share knowledge beyond the confines of a fixed location. By utilising the mobile applications available via smartphone, learners can engage in collaborative networks and find information that they need in a variety of diverse environments. This paper shares the findings of a research at UiTM to determine the technological readiness of the students by measuring their digital skills using the Digital Competence Framework (EU. 50 students from the English language proficiency course were purposively sampled because they have been exposed to MALL by their lecturer participated in this research. Their responses were collected through an online questionnaire. The findings showed that all 50 of the students owned a smartphone. 82.6% of the students did not attend any training on how to use the smartphones. 80.4% of the students have their own storing strategies and nearly 90% of the students reported having the following technological skills in operating their smartphone such as accessing applications, ability to record, share and produce technological resources. The findings reiterate that to ensure successful MALL, educators need to be aware of the background and technological skills of the learners before embedding m-learning into the English Language lessons. View it in PDF

  4. Energy and Technology Review

    International Nuclear Information System (INIS)

    1986-03-01

    An overview is given of research programs at a two-stage light-gas gun facility. Representative gas-gun experiments are described, and the impact of this research on other LLNL programs and on high-pressure physics work in general are discussed. Particular applications reported include: measurement of equations of state for various materials, synthesis and study of novel materials, and studies of high explosives. Specialized diagnostic techniques for gas-gun experiments are reviewed

  5. Energy and technology review

    International Nuclear Information System (INIS)

    1982-06-01

    Brief reviews are presented of research programs at Lawrence Livermore Laboratory. In one, fast and precise measurement techniques to meet the demanding specifications for microsphere targets used in inertial-confinement fusion experiments are described. Another program is described in which a Raman-spectroscopy microprobe is used to perform molecular-structure analyses on submicron-size particles. Finally, the first year of the controlled thermonuclear reactions program is described

  6. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    1986-03-01

    An overview is given of research programs at a two-stage light-gas gun facility. Representative gas-gun experiments are described, and the impact of this research on other LLNL programs and on high-pressure physics work in general are discussed. Particular applications reported include: measurement of equations of state for various materials, synthesis and study of novel materials, and studies of high explosives. Specialized diagnostic techniques for gas-gun experiments are reviewed. (LEW)

  7. Exploring Instructors' Technology Readiness, Attitudes and Behavioral Intentions towards E-Learning Technologies in Egypt and United Arab Emirates

    Science.gov (United States)

    El Alfy, Shahira; Gómez, Jorge Marx; Ivanov, Danail

    2017-01-01

    This paper explores the association between technology readiness, (a meta-construct consisting of optimism, innovativeness, discomfort, and insecurity), attitude, and behavioral intention towards e-learning technologies adoption within an education institution context. The empirical study data is collected at two private universities located in…

  8. 'Capture ready' regulation of fossil fuel power plants - Betting the UK's carbon emissions on promises of future technology

    International Nuclear Information System (INIS)

    Markusson, Nils; Haszeldine, Stuart

    2010-01-01

    Climate change legislation requires emissions reductions, but the market shows interest in investing in new fossil fuelled power plants. The question is whether capture ready policy can reconcile these interests. The term 'capture ready' has been used a few years by the UK Government when granting licences for fossil fuelled power plants, but only recently has the meaning of the term been defined. The policy has been promoted as a step towards CCS and as an insurance against carbon lock-in. This paper draws on literature on technology lock-in and on regulation of technology undergoing development. Further, versions of the capture readiness concept proposed to date are compared. Capture readiness requirements beyond the minimum criterion of space on the site for capture operations are explored. This includes integration of capture and power plant, downstream operations, overall system integration and regulation of future retrofitting. Capture readiness comes with serious uncertainties and is no guarantee that new-built fossil plants will be abatable or abated in the future. As a regulatory strategy, it has been over-promised in the UK.

  9. Readiness of Adults to Learn Using E-Learning, M-Learning and T-Learning Technologies

    Science.gov (United States)

    Vilkonis, Rytis; Bakanoviene, Tatjana; Turskiene, Sigita

    2013-01-01

    The article presents results of the empirical research revealing readiness of adults to participate in the lifelong learning process using e-learning, m-learning and t-learning technologies. The research has been carried out in the framework of the international project eBig3 aiming at development a new distance learning platform blending virtual…

  10. Lab-On-a-Chip Application Development (LOCAD): Bridging Technology Readiness for Exploration

    Science.gov (United States)

    Spearing, Scott F.; Jenkins, Andy

    2004-01-01

    At Marshall Space Flight Center we have established a capability to investigate the use of microfluidics for space flight. The Lab-On-a-Chip Application Development (LOCAD) team has created a program for advancing Technology Readiness Levels (TRL) of 1 and 2 to TRL 6 and 7, quickly and economically for Lab-On-a-Chip (LOC) applications. Scientists and engineers can utilize LOCAD'S process to efficiently learn about microfluidics and determine if microfluidics is applicable to their needs. Once the applicability has been determined, LOCAD can then perform tests to develop the new fluidic protocols which are different from macro-scale chemical reaction protocols. With this information new micro-fluidic devices can be created and tested. Currently, LOCAD is focused on using microfluidics for both Environmental Monitoring & Control, and Medical Systems. Eventually, handheld portable units utilizing LOC technology will perform rapid tests to determine water quality, and microbial contamination levels. Since LOC technology is drastically reduced in physical size, it thereby reduces power, weight, volume, and sample requirements, a big advantage considering the resource constraints associated with spaceflight. Another one of LOCAD's current activities is the development of a microfluidic system to aid in the search for life on Mars.

  11. Review of Biojet Fuel Conversion Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei-Cheng [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tao, Ling [National Renewable Energy Lab. (NREL), Golden, CO (United States); Markham, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhang, Yanan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Batan, Liaw [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biddy, Mary [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Biomass-derived jet (biojet) fuel has become a key element in the aviation industry’s strategy to reduce operating costs and environmental impacts. Researchers from the oil-refining industry, the aviation industry, government, biofuel companies, agricultural organizations, and academia are working toward developing commercially viable and sustainable processes that produce long-lasting renewable jet fuels with low production costs and low greenhouse gas emissions. Additionally, jet fuels must meet ASTM International specifications and potentially be a 100% drop-in replacement for the current petroleum jet fuel. The combustion characteristics and engine tests demonstrate the benefits of running the aviation gas turbine with biojet fuels. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways, are reviewed. The main challenges for each technology pathway, including feedstock availability, conceptual process design, process economics, life-cycle assessment of greenhouse gas emissions, and commercial readiness, are discussed. Although the feedstock price and availability and energy intensity of the process are significant barriers, biomass-derived jet fuel has the potential to replace a significant portion of conventional jet fuel required to meet commercial and military demand.

  12. Nuclear technology review 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-08-15

    Cadarache, France.The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 24 members, with the addition in 2005 of Ukraine and the United States of America. Current INPRO activities include completion of a user manual on the INPRO methodology, application of the methodology to assessing innovative nuclear energy systems (INSs) in national and multinational studies, analyses of the role and structure of INSs in meeting energy demands in a sustainable manner, and selection of the most suitable areas for collaborative development. Developments in accelerator based techniques, production of radioisotopes and some novel uses of nanotechnology are also reported. Nuclear technologies continue to play key and often unique roles in food production and safety, in human and animal health, in water resource management and in the environment. Mutation breeding of crops, for example, has led to the use of previously unusable land in many countries for rice production. In human health, the use of stable isotopes is becoming an accepted tool for the development of nutrition programmes. Nuclear medicine is benefiting from technological advances in computing. Sustainable water management and desalination remain high on the international agenda. New developments in isotopic analysis of hydrological samples hold promise for increasing the use of isotopes in water resources management. Advances in sampling and analytical techniques have assisted in better understanding of the environment. Developments in all these areas are also reported.

  13. Nuclear technology review 2006

    International Nuclear Information System (INIS)

    2006-08-01

    Cadarache, France.The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 24 members, with the addition in 2005 of Ukraine and the United States of America. Current INPRO activities include completion of a user manual on the INPRO methodology, application of the methodology to assessing innovative nuclear energy systems (INSs) in national and multinational studies, analyses of the role and structure of INSs in meeting energy demands in a sustainable manner, and selection of the most suitable areas for collaborative development. Developments in accelerator based techniques, production of radioisotopes and some novel uses of nanotechnology are also reported. Nuclear technologies continue to play key and often unique roles in food production and safety, in human and animal health, in water resource management and in the environment. Mutation breeding of crops, for example, has led to the use of previously unusable land in many countries for rice production. In human health, the use of stable isotopes is becoming an accepted tool for the development of nutrition programmes. Nuclear medicine is benefiting from technological advances in computing. Sustainable water management and desalination remain high on the international agenda. New developments in isotopic analysis of hydrological samples hold promise for increasing the use of isotopes in water resources management. Advances in sampling and analytical techniques have assisted in better understanding of the environment. Developments in all these areas are also reported

  14. Science & Technology Review: September 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-09-30

    This is the September issue of the Lawrence Livermore National Laboratory's Science & Technology Review, which communicates, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. This month, there are features on "Laboratory Investments Drive Computational Advances" and "Laying the Groundwork for Extreme-Scale Computing." Research highlights include "Nuclear Data Moves into the 21st Century", "Peering into the Future of Lick Observatory", and "Facility Drives Hydrogen Vehicle Innovations."

  15. Assessing the relationship between technology readiness and continuance intention in an E-appointment system: relationship quality as a mediator.

    Science.gov (United States)

    Chen, Shih-Chih; Jong, Din; Lai, Min-Tsai

    2014-09-01

    Numerous types of self-service technologies have prevailed due to innovations in network and information technology. To hospitals, patient intentions to continue to use the e-appointment system are crucial. Previous investigations discussed only the relationships between the technology readiness of users and their continuance intentions, and ignored the most important mediator, relationship quality. This study explored the relationships among technology readiness, relationship quality, and continuance intention. The research results demonstrated that both optimism and innovativeness significantly and positively influenced continuance intention through the mediating effect of relationship quality. However, discomfort and insecurity hid not significantly influence relationship quality or continuance intention. Finally, theoretical contributions, managerial implications and future research directions were discussed.

  16. Readiness and Acceptability of Information and Communication Technology Integration in Basic Education

    Directory of Open Access Journals (Sweden)

    CHARLIE P. NACARIO

    2014-02-01

    Full Text Available A research study was conducted to determine the readiness and acceptability of information and communication technology (ICT integration in six internet connected Public High Schools (ischools in Camarines Sur. It also aimed to determine the ICT knowledge, skills and attitude of faculty and students in ischools, ICT trainings and competencies of teachers and availability of ICT facilities in the schools and community. Purposive sampling was used in determining the respondents of the study and quantitative statistical tools such as frequency counts, percentage rates and weighted means were used in analyzing the data. Findings revealed that faculty and students in two out of the six schools were highly knowledgeable and highly skilled in ICT hardware and software components identification but only one school was found to be highly competent on ICT usage. All faculty members in one school integrated ICT in teaching English, Math, Science and TLE however, no school integrated ICT in Social Studies. The availability of ICT resources and the provision of initial ICT trainings to faculty and students in ischools contributed to ICT integration in teaching. The initial level of ICT integration in teaching is indicative of faculty and students’ readiness and acceptance of ICT tools in teaching-learning environment. Recommendations in the study were conduct of retraining courses on ICT; development of ICT-based teaching modules in Social Studies; conduct future studies that would test relationship between socio-demographic profile and ICT integration in teaching; and correlate ICT competencies of students in achievement tests in English, Math, and Science among ischools.

  17. Nuclear Technology Review 2012

    International Nuclear Information System (INIS)

    2012-09-01

    In 2011, nuclear energy continued to play an important role in global electricity production despite the accident at the Fukushima Daiichi nuclear power plant (NPP). Total generating nuclear power capacity was slightly lower than in previous years due to the permanent shutdown of 13 reactors in 2011, including 8 in Germany and 4 in Japan in the wake of the accident. However, there were 7 new grid connections compared to 5 in 2010, 2 in 2009 and none in 2008. Significant growth in the use of nuclear energy worldwide is still anticipated - between 35% and 100% by 2030 - although the Agency projections for 2030 are 7-8% lower than projections made in 2010. The factors that have contributed to an increased interest in nuclear power did not change: an increasing global demand for energy, concerns about climate change, energy security and uncertainty about fossil fuel supplies. Most of the growth is still expected in countries that already have operating NPPs, especially in Asia, with China and India remaining the main centres of expansion while the Russian Federation will also remain a centre of strong growth. The 7-8% drop in projected growth for 2030 reflects an accelerated phase-out of nuclear power in Germany, some immediate shutdowns and a government review of the planned expansion in Japan, as well as temporary delays in expansion in several other countries. Measures taken by countries as a result of the Fukushima Daiichi nuclear accident have been varied. A number of countries announced reviews of their programmes. Belgium, Germany and Switzerland took additional steps to phase out nuclear power entirely while others re-emphasized their expansion plans. Many Member States carried out national safety assessment reviews in 2011 (often called 'stress tests'), and commitments were made to complete any remaining assessments promptly and to implement the necessary corrective action. In countries considering the introduction of nuclear power, interest remained strong

  18. Management of Ready-to-Use Parenteral Nutrition in Newborns: Systematic Review.

    Science.gov (United States)

    Mena, Karen Daniela Romero; Espitia, Olga Lucia Pinzón; Vergara, José Alejandro Daza

    2018-04-27

    Parenteral support has increased the possibility of neonatal recovery. However, complications associated with its use have been documented. One commercial method developed to decrease the complications of this type of support is the ready-to-use parenteral nutrition (PN), a 3-chamber bag that provides a complete nutrient mix. This systematic review seeks, through the Preferred Reporting Items for Systematic Reviews and Meta-Analyses methodology, to establish the benefits in newborns. Seven databases and gray literature were used. The search was limited to publications from 2007-2017 and to articles written in English, Spanish, and Portuguese. Articles that did not meet the inclusion criteria and studies with low quality evaluated with the Scottish Intercollegiate Guidelines Network guidelines, which were without information about the study or analytical methods, were excluded. A total of 24,193 articles were obtained, which were initially evaluated by title and abstract according to the inclusion criteria. A total of 24,167 articles were discarded, obtaining 27 eligible for follow-up evaluation. After a detailed evaluation of the full text, 13 articles were selected. It was found that ready-to-use PN has the potential benefit to reduce the risks for infections, provide an adequate supply of nutrients, generate growth within the expected range, provide ease of use, decrease prescription errors, and potentially reduce costs. It is necessary to evaluate the short- and long-term impact of its use. © 2018 American Society for Parenteral and Enteral Nutrition.

  19. Science & Technology Review June 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-06-01

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  20. Nuclear Technology Review 2008

    International Nuclear Information System (INIS)

    2008-08-01

    , on a non-discriminatory basis and under the control of the IAEA. Nineteen countries signed a statement of principles of the Global Nuclear Energy Partnership, which aims at accelerating development and deployment of advanced fuel cycle technologies to foster development, improve the environment, and reduce the risk of nuclear proliferation. The NRC approved the release of most of the Big Rock Point nuclear power plant site and most of the Yankee Rowe nuclear power plant site for unrestricted public use. Thus, ten power plants around the world have been completely decommissioned with their sites released for unconditional use. Seventeen plants have been partially dismantled and safely enclosed. Thirty-two are being dismantled prior to eventual site release, and thirty-four reactors are undergoing minimum dismantling prior to long term enclosure. In September, the IAEA launched a new Network of Centres of Excellence for Decommissioning to improve the flow of knowledge and experience among those engaged in decommissioning and to encourage organizations in developed Member States to contribute to the activities of Member States requiring decommissioning assistance. Nuclear and isotopic techniques continue to make substantive contributions in agriculture, human health, the marine and terrestrial environments as well as in water resource management. In food and agriculture, plant mutation breeding is supporting the development of new varieties of crops that bring enhanced yields while also providing significant environmental benefits through reduced requirements for fertilizers and increased resistance to biotic and abiotic stresses. The genetic enhancement of biomass crops is useful in responding to increasing demands for biofuels. In addition to the continuing use of irradiation for sanitary purposes, the use of irradiation for phytosanitary applications, especially those applications related to quarantine measures, is increasing.

  1. Nuclear Technology Review 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    , on a non-discriminatory basis and under the control of the IAEA. Nineteen countries signed a statement of principles of the Global Nuclear Energy Partnership, which aims at accelerating development and deployment of advanced fuel cycle technologies to foster development, improve the environment, and reduce the risk of nuclear proliferation. The NRC approved the release of most of the Big Rock Point nuclear power plant site and most of the Yankee Rowe nuclear power plant site for unrestricted public use. Thus, ten power plants around the world have been completely decommissioned with their sites released for unconditional use. Seventeen plants have been partially dismantled and safely enclosed. Thirty-two are being dismantled prior to eventual site release, and thirty-four reactors are undergoing minimum dismantling prior to long term enclosure. In September, the IAEA launched a new Network of Centres of Excellence for Decommissioning to improve the flow of knowledge and experience among those engaged in decommissioning and to encourage organizations in developed Member States to contribute to the activities of Member States requiring decommissioning assistance. Nuclear and isotopic techniques continue to make substantive contributions in agriculture, human health, the marine and terrestrial environments as well as in water resource management. In food and agriculture, plant mutation breeding is supporting the development of new varieties of crops that bring enhanced yields while also providing significant environmental benefits through reduced requirements for fertilizers and increased resistance to biotic and abiotic stresses. The genetic enhancement of biomass crops is useful in responding to increasing demands for biofuels. In addition to the continuing use of irradiation for sanitary purposes, the use of irradiation for phytosanitary applications, especially those applications related to quarantine measures, is increasing.

  2. Nuclear Technology Review 2009

    International Nuclear Information System (INIS)

    2009-08-01

    The year 2008 was paradoxical for nuclear power. Projections of future growth were revised upwards, but no new reactors were connected to the grid. It was the first year since 1955 without at least one new reactor coming on-line. There were, however, ten construction starts, the most since 1985. At least until the global financial crisis, cost estimates reported for new nuclear reactors were often higher than those in previous years, particularly in regions with less recent experience in new construction. However, growth targets for nuclear power were raised in the Russian Federation, and similar considerations were under review in China. India negotiated a safeguards agreement with the Agency in August, and the Nuclear Suppliers Group subsequently exempted India from previous restrictions on nuclear trade, which should allow India to accelerate its planned expansion of nuclear power. In the USA, the Nuclear Regulatory Commission (NRC) received combined licence (COL) applications for 26 new reactors. The US Department of Energy (USDOE) received 19 'Part I applications' for Federal loan guarantees to build 21 new reactors. Nonetheless, current expansion, as well as near term and long term growth prospects, remain centred in Asia. Of the ten construction starts in 2008, eight were in Asia. Twenty-eight of the 44 reactors under construction at the end of the year were in Asia, as were 28 of the last 39 new reactors to have been connected to the grid. Armenia joined the Russian Federation and Kazakhstan as members of the International Uranium Enrichment Centre in Angarsk, Siberia. The Ukrainian Government announced that Ukraine would also join. AREVA and USEC applied to the USDOE for loan guarantees for the construction of AREVA's proposed Eagle Rock Enrichment Facility and USEC's American Centrifuge Plant. Construction of an underground repository for low and medium level radioactive waste began at the former Konrad iron mine in Germany. The USDOE submitted a formal

  3. Nuclear Technology Review 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    In 2009, construction started on 12 new nuclear power reactors, the largest number since 1985, and projections of future nuclear power growth were once again revised upwards. However, only two new reactors were connected to the grid, and, with three reactors retired during the year, the total nuclear power capacity around the world dropped slightly for the second year in a row. Current expansion, as well as near term and long term growth prospects, remain centred in Asia. Ten of the 12 construction starts were in Asia, as were both of the new grid connections. Although the global financial crisis that started in the second half of 2008 did not dampen overall projections for nuclear power, it was cited as a contributing factor in near-term delays or postponements affecting nuclear projects in some regions of the world. In some European countries where previously there were restrictions on the future use of nuclear power, there was a trend towards reconsidering these policies. Interest in starting new nuclear power programmes remained high. Over 60 Member States have expressed to the IAEA interest in considering the introduction of nuclear power, and, in 2009, the IAEA conducted its first Integrated Nuclear Infrastructure Review missions in Jordan, Indonesia and Vietnam. Estimates of identified conventional uranium resources (at less than $130/kg U) increased slightly, due mainly to increases reported by Australia, Canada and Namibia. Uranium spot prices declined, and final data for 2009 are expected to show a consequent decrease in uranium exploration and development. The Board of Governors has authorized the IAEA Director General to sign an agreement with the Russian Federation to establish an international reserve of low enriched uranium (LEU). It would contain 120 tonnes of LEU that could be made available to a country affected by a non-commercial interruption of its LEU supply. The agreement between the IAEA and the Russian Federation was signed in March 2010

  4. Nuclear Technology Review 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-08-15

    The year 2008 was paradoxical for nuclear power. Projections of future growth were revised upwards, but no new reactors were connected to the grid. It was the first year since 1955 without at least one new reactor coming on-line. There were, however, ten construction starts, the most since 1985. At least until the global financial crisis, cost estimates reported for new nuclear reactors were often higher than those in previous years, particularly in regions with less recent experience in new construction. However, growth targets for nuclear power were raised in the Russian Federation, and similar considerations were under review in China. India negotiated a safeguards agreement with the Agency in August, and the Nuclear Suppliers Group subsequently exempted India from previous restrictions on nuclear trade, which should allow India to accelerate its planned expansion of nuclear power. In the USA, the Nuclear Regulatory Commission (NRC) received combined licence (COL) applications for 26 new reactors. The US Department of Energy (USDOE) received 19 'Part I applications' for Federal loan guarantees to build 21 new reactors. Nonetheless, current expansion, as well as near term and long term growth prospects, remain centred in Asia. Of the ten construction starts in 2008, eight were in Asia. Twenty-eight of the 44 reactors under construction at the end of the year were in Asia, as were 28 of the last 39 new reactors to have been connected to the grid. Armenia joined the Russian Federation and Kazakhstan as members of the International Uranium Enrichment Centre in Angarsk, Siberia. The Ukrainian Government announced that Ukraine would also join. AREVA and USEC applied to the USDOE for loan guarantees for the construction of AREVA's proposed Eagle Rock Enrichment Facility and USEC's American Centrifuge Plant. Construction of an underground repository for low and medium level radioactive waste began at the former Konrad iron mine in Germany. The USDOE submitted a formal

  5. Nuclear Technology Review 2010

    International Nuclear Information System (INIS)

    2010-09-01

    In 2009, construction started on 12 new nuclear power reactors, the largest number since 1985, and projections of future nuclear power growth were once again revised upwards. However, only two new reactors were connected to the grid, and, with three reactors retired during the year, the total nuclear power capacity around the world dropped slightly for the second year in a row. Current expansion, as well as near term and long term growth prospects, remain centred in Asia. Ten of the 12 construction starts were in Asia, as were both of the new grid connections. Although the global financial crisis that started in the second half of 2008 did not dampen overall projections for nuclear power, it was cited as a contributing factor in near-term delays or postponements affecting nuclear projects in some regions of the world. In some European countries where previously there were restrictions on the future use of nuclear power, there was a trend towards reconsidering these policies. Interest in starting new nuclear power programmes remained high. Over 60 Member States have expressed to the IAEA interest in considering the introduction of nuclear power, and, in 2009, the IAEA conducted its first Integrated Nuclear Infrastructure Review missions in Jordan, Indonesia and Vietnam. Estimates of identified conventional uranium resources (at less than $130/kg U) increased slightly, due mainly to increases reported by Australia, Canada and Namibia. Uranium spot prices declined, and final data for 2009 are expected to show a consequent decrease in uranium exploration and development. The Board of Governors has authorized the IAEA Director General to sign an agreement with the Russian Federation to establish an international reserve of low enriched uranium (LEU). It would contain 120 tonnes of LEU that could be made available to a country affected by a non-commercial interruption of its LEU supply. The agreement between the IAEA and the Russian Federation was signed in March 2010

  6. PROMETHEE-ROC Model for Assessing the Readiness of Technology for Generating Energy

    Directory of Open Access Journals (Sweden)

    Danielle Costa Morais

    2015-01-01

    Full Text Available This paper puts forward a proposal for a multicriteria decision model for prioritizing technologies that are critical for power generation in the energy sector. It deals with the context of imprecise information regarding importance of criteria; then an integration of surrogate weights with the PROMETHEE method is undertaken in order to approach this context. In this type of strategic decision problem, how to deal with imprecise information is always a challenge. The use of surrogate weights presents a significant contribution and it can facilitate the assignment of weights in a decision ranking problem, which requires the decision-maker (DM to order the criteria by their importance for the decision problem. Thus for this situation of assessing the readiness of technology for generating energy where the DM is able and feels comfortable to order all criteria by their relative importance, the proposed approach of surrogate weights in the PROMETHEE II method, the PROMETHEE-ROC model, is shown to be an adequate approach.

  7. Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

    Science.gov (United States)

    Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

    2017-11-01

    The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

  8. Goal line technology in soccer: Are referees ready for technology in ...

    African Journals Online (AJOL)

    When controversial decisions are made, the referee comes under extensive scrutiny by players, fans and spectators as well as commentators who have the tendency of scapegoating the referee. The purpose of the study was to examine the perceptions of soccer referees regarding the use of goal line technology in soccer.

  9. Foundry Coating Technology: A Review

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat

    2011-01-01

    is important. In this review, a detailed description of these topics and examples are provided where necessary. A potential area of research in foundry coating development, using sol-gel process is suggested. The application of sol-gel technology in the development of foundry coatings is a novel approach....

  10. A Systematic Review of Instruments to Assess Organizational Readiness for Knowledge Translation in Health Care

    Science.gov (United States)

    Gagnon, Marie-Pierre; Attieh, Randa; Ghandour, El Kebir; Légaré, France; Ouimet, Mathieu; Estabrooks, Carole A.; Grimshaw, Jeremy

    2014-01-01

    Background The translation of research into practices has been incomplete. Organizational readiness for change (ORC) is a potential facilitator of effective knowledge translation (KT). However we know little about the best way to assess ORC. Therefore, we sought to systematically review ORC measurement instruments. Methods We searched for published studies in bibliographic databases (Pubmed, Embase, CINAHL, PsychINFO, Web of Science, etc.) up to November 1st, 2012. We included publications that developed ORC measures and/or empirically assessed ORC using an instrument at the organizational level in the health care context. We excluded articles if they did not refer specifically to ORC, did not concern the health care domain or were limited to individual-level change readiness. We focused on identifying the psychometric properties of instruments that were developed to assess readiness in an organization prior to implementing KT interventions in health care. We used the Standards for Educational and Psychological Testing to assess the psychometric properties of identified ORC measurement instruments. Findings We found 26 eligible instruments described in 39 publications. According to the Standards for Educational and Psychological Testing, 18 (69%) of a total of 26 measurement instruments presented both validity and reliability criteria. The Texas Christian University –ORC (TCU-ORC) scale reported the highest instrument validity with a score of 4 out of 4. Only one instrument, namely the Modified Texas Christian University – Director version (TCU-ORC-D), reported a reliability score of 2 out of 3. No information was provided regarding the reliability and validity of five (19%) instruments. Conclusion Our findings indicate that there are few valid and reliable ORC measurement instruments that could be applied to KT in the health care sector. The TCU-ORC instrument presents the best evidence in terms of validity testing. Future studies using this instrument could

  11. A systematic review of instruments to assess organizational readiness for knowledge translation in health care.

    Directory of Open Access Journals (Sweden)

    Marie-Pierre Gagnon

    Full Text Available The translation of research into practices has been incomplete. Organizational readiness for change (ORC is a potential facilitator of effective knowledge translation (KT. However we know little about the best way to assess ORC. Therefore, we sought to systematically review ORC measurement instruments.We searched for published studies in bibliographic databases (Pubmed, Embase, CINAHL, PsychINFO, Web of Science, etc. up to November 1st, 2012. We included publications that developed ORC measures and/or empirically assessed ORC using an instrument at the organizational level in the health care context. We excluded articles if they did not refer specifically to ORC, did not concern the health care domain or were limited to individual-level change readiness. We focused on identifying the psychometric properties of instruments that were developed to assess readiness in an organization prior to implementing KT interventions in health care. We used the Standards for Educational and Psychological Testing to assess the psychometric properties of identified ORC measurement instruments.We found 26 eligible instruments described in 39 publications. According to the Standards for Educational and Psychological Testing, 18 (69% of a total of 26 measurement instruments presented both validity and reliability criteria. The Texas Christian University -ORC (TCU-ORC scale reported the highest instrument validity with a score of 4 out of 4. Only one instrument, namely the Modified Texas Christian University - Director version (TCU-ORC-D, reported a reliability score of 2 out of 3. No information was provided regarding the reliability and validity of five (19% instruments.Our findings indicate that there are few valid and reliable ORC measurement instruments that could be applied to KT in the health care sector. The TCU-ORC instrument presents the best evidence in terms of validity testing. Future studies using this instrument could provide more knowledge on its

  12. Technology Readiness Evaluation For Aluminum Removal And Sodium Hydroxide Regenration From Hanford Tank Waste By Lithium Hydrotalcite Precipitation

    International Nuclear Information System (INIS)

    Sams, T.L.; Massie, H.L.

    2011-01-01

    A Technology Readiness Evaluation (TRE) performed by AREV A Federal Services, LLC (AFS) for Washington River Protection Solutions, LLC (WRPS) shows the lithium hydrotalcite (LiHT) process invented and patented (pending) by AFS has reached an overall Technology Readiness Level (TRL) of 3. The LiHT process removes aluminum and regenerates sodium hydroxide. The evaluation used test results obtained with a 2-L laboratory-scale system to validate the process and its critical technology elements (CTEs) on Hanford tank waste simulants. The testing included detailed definition and evaluation for parameters of interest and validation by comparison to analytical predictions and data quality objectives for critical subsystems. The results of the TRE would support the development of strategies to further mature the design and implementation of the LiHT process as a supplemental pretreatment option for Hanford tank waste.

  13. Operational Readiness Review Implementation Plan for the K Basin Fuel Transfer System

    International Nuclear Information System (INIS)

    DAVIES, T.H.

    2002-01-01

    This implementation plan has been prepared to comply with the requirements of U.S. Department of Energy (DOE) Order 425.1A, Startup and Restart of Nuclear Facilities, and DOE-STD-3006-2000, Planning and Conduct of Operational Readiness Reviews (ORR) (DOE 2002). The scope of the ORR is described in the contractor K Basin Fuel Transfer System (FTS) Plan of Action (POA), which was prepared by Spent Nuclear Fuel (SNF) Project line management and approved by the DOE Richland Operations Office (RL) Manager on April 4, 2002 (FH 2002a). While the Project Hanford Management Contractor has been revised to include DOE Order 425.1B, the contractor implementing procedure, ''F-PRO-055, Startup Readiness (Revision 9) has not yet been approved by RL for contractor use. Appendix A provides a crosswalk between the requirements of DOE Order 425.1A and DOE Order 425.1B to show that all requirements of DOE 425.1B are covered by this implementation plan. DOE Order 425.1B indicates that the Secretarial Officer is the Authorization Authority when substantial modifications are made to a Hazard Category 2 nuclear facility. This Authorization Authority has been delegated to the RL Manager by memorandum from Jessie Hill Roberson, dated November 20, 2001 (Roberson 2001). The scope of the ORR is described in the RL Plan of Action, K Basin Fuel Transfer System, prepared by DOE project line management and approved by the RL Manager, the designated approval authority, on September 12, 2002 (Schlender 2002). This implementation plan provides the overall approach and guidelines for performance of the DOE ORR. Appendix B contains the Criteria and Review Approach Documents (CRAD), which define the review objectives and criteria as well as the approach for assessing each objective. ORR results will be published in a final report, as discussed in Section 9.4

  14. Why Do Teachers Use Game-Based Learning Technologies? The Role of Individual and Institutional ICT Readiness

    OpenAIRE

    Hamari, Juho; Nousiainen, Tuula

    2015-01-01

    This paper investigates how different individual and institutional factors pertaining to ICT readiness influence teachers’ adoption of game-based learning technologies. The data were gathered from Finnish primary, lower secondary and upper secondary school teachers (N=1668) with an online survey. The results indicate that openness towards ICT, ICT attitude and the ICT compatibility with teaching positively influence the perceived value whereas openness towards ICT, ...

  15. Vehicle-to-vehicle communications : readiness of V2V technology for application.

    Science.gov (United States)

    2014-08-01

    The purpose of this research report is to assess the readiness for application of vehicle-to-vehicle (V2V) : communications, a system designed to transmit basic safety information between vehicles to facilitate warnings to : drivers concerning impend...

  16. Leveraging Advanced Technology in Army and Air Force Readiness and Sustainment Training

    National Research Council Canada - National Science Library

    Lindsey, Kathy

    2003-01-01

    Operational readiness and sustainment training allow military forces to be prepared for various types of contingency operations and provide for the primary means of protection and defense of United...

  17. Impact of Birth Preparedness and Complication Readiness Interventions on Birth with a Skilled Attendant : A Systematic Review

    NARCIS (Netherlands)

    Miltenburg, Andrea Solnes; Roggeveen, Yadira; Shields, Laura; van Elteren, Marianne; van Roosmalen, Jos; Stekelenburg, Jelle; Portela, Anayda

    2015-01-01

    Background Increased preparedness for birth and complications is an essential part of antenatal care and has the potential to increase birth with a skilled attendant. We conducted a systematic review of studies to assess the effect of birth preparedness and complication readiness interventions on

  18. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  19. Lessons Learned from Sandia National Laboratories' Operational Readiness Review of the Annular Core Research Reactor (ACRR)

    Energy Technology Data Exchange (ETDEWEB)

    Bendure, Albert O.; Bryson, James W.

    1999-05-17

    The Sandia ACRR (a Hazard Category 2 Nuclear Reactor Facility) was defueled in June 1997 to modify the reactor core and control system to produce medical radioisotopes for the Department of Energy (DOE) Isotope Production Program. The DOE determined that an Operational Readiness Review (ORR) was required to confirm readiness to begin operations within the revised safety basis. This paper addresses the ORR Process, lessons learned from the Sandia and DOE ORRS of the ACRR, and the use of the ORR to confirm authorization basis implementation.

  20. Management of the Cs/Sr Capsule Project at the Hanford Site. Technology Readiness Assessment Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2018-01-01

    The Federal Project Director (FPD) for the U.S. Department of Energy (DOE), Richland Operations Office (RL) Waste Management and D&D Division (WMD) requested a Technology Readiness Assessment (TRA) for the Management of the Cesium/Strontium Capsule Storage Project (MCSCP) at the Waste Encapsulation and Storage Facility (WESF) on the Hanford Site in Washington State. The MCSCP CD-1 TRA was performed by a team selected in collaboration between the Office of Environmental Management (EM) Chief Engineer (EM-3.3) and RL, WMD FPD. The TRA Team included subject matter and technical experts having experience in cask storage, process engineering, and system design who were independent of the MCSCP, and the team was led by the Director of Operations and Processes from the EM Chief Engineer's Office (EM-3.32). Movement of the Cs/Sr capsules to dry storage, based on information from the conceptual design, involves (1) capsule packaging, (2) capsule transfer, and (3) capsule storage. The project has developed a conceptual process, described in 30059-R-02, "NAC Conceptual Design Report for the Management of the Cesium and Strontium Capsules Project", which identifies the five major activities in the process to complete the transfer from storage pool to pad-mounted cask storage. The process, shown schematically in Figure 1, is comprised of the following process steps: (1) loading capsules into the UCS; (2) UCS processing; (3) UCS insertion into the TSC Basket; (4) cask transport from WESF to CSA and (5) extended storage at the CSA.

  1. Tidal energy - a technology review

    International Nuclear Information System (INIS)

    Price, R.

    1991-01-01

    The tides are caused by gravitational attraction of the sun and the moon acting upon the world's oceans. This creates a clean renewable form of energy which can in principle be tapped for the benefit of mankind. This paper reviews the status of tidal energy, including the magnitude of the resource, the technology which is available for its extraction, the economics, possible environmental effects and non-technical barriers to its implementation. Although the total energy flux of the tides is large, at about 2 TW, in practice only a very small fraction of this total potential can be utilised in the foreseeable future. This is because the energy is spread diffusely over a wide area, requiring large and expensive plant for its collection, and is often available remote from centres of consumption. The best mechanism for exploiting tidal energy is to employ estuarine barrages at suitable sites with high tidal ranges. The technology is relatively mature and components are commercially available now. Also, many of the best sites for implementation have been identified. However, the pace and extent of commercial exploitation of tidal energy is likely to be significantly influenced, both by the treatment of environmental costs of competing fossil fuels, and by the availability of construction capital at modest real interest rates. The largest projects could require the involvement of national governments if they are to succeed. (author) 8 figs., 2 tabs., 19 refs

  2. Microturbine Power Conversion Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Staunton, R.H.

    2003-07-21

    In this study, the Oak Ridge National Laboratory (ORNL) is performing a technology review to assess the market for commercially available power electronic converters that can be used to connect microturbines to either the electric grid or local loads. The intent of the review is to facilitate an assessment of the present status of marketed power conversion technology to determine how versatile the designs are for potentially providing different services to the grid based on changes in market direction, new industry standards, and the critical needs of the local service provider. The project includes data gathering efforts and documentation of the state-of-the-art design approaches that are being used by microturbine manufacturers in their power conversion electronics development and refinement. This project task entails a review of power converters used in microturbines sized between 20 kW and 1 MW. The power converters permit microturbine generators, with their non-synchronous, high frequency output, to interface with the grid or local loads. The power converters produce 50- to 60-Hz power that can be used for local loads or, using interface electronics, synchronized for connection to the local feeder and/or microgrid. The power electronics enable operation in a stand-alone mode as a voltage source or in grid-connect mode as a current source. Some microturbines are designed to automatically switch between the two modes. The information obtained in this data gathering effort will provide a basis for determining how close the microturbine industry is to providing services such as voltage regulation, combined control of both voltage and current, fast/seamless mode transfers, enhanced reliability, reduced cost converters, reactive power supply, power quality, and other ancillary services. Some power quality improvements will require the addition of storage devices; therefore, the task should also determine what must be done to enable the power conversion circuits to

  3. Science and Technology Review May 2001

    International Nuclear Information System (INIS)

    Quong, A.A.

    2001-01-01

    This issue contains the following articles: (1) ''Advanced Technology for Stockpile Stewardship''. (2) ''Uncovering Hidden Defects with Neutrons''--High-energy neutrons can effectively image heavily shielded objects that are essentially opaque to x rays. (3) ''The Human in the Mouse Mirror'' Comparative genomics may help us to better understand our genetic heritage and evolution, or why humans are human and mice are mice. (4) ''The NIF Target Chamber--Ready for the Challenge'' Good progress is being made on the construction of the world's largest laser. (5) ''Indoor Testing Begins Soon at Site 300'' The world's largest explosives chamber nears completion

  4. 2017 Building Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-11-01

    The 2017 Building Technologies Office Peer Review Report summarizes the feedback submitted by reviewers for the 109 Building Technologies Office (BTO) projects presented at the 2017 BTO Peer Review. The report presents an overview of the goals and activities under each technology program area, a summary of project scores for each program, and a brief analysis of general evaluation trends within each program area or its constituent subprograms.

  5. How user diversity and country of origin impact the readiness to adopt E-health technologies: an intercultural comparison.

    Science.gov (United States)

    Wilkowsk, Wiktoria; Ziefle, Martina; Alagöz, Firat

    2012-01-01

    In recent years, due to the demographical change and the resulting overload of healthcare systems, there has been an increasing interest focusing on the global proliferation of assistive medical technologies (=E-health) in home environments. The present study examines how users' diversity influences the readiness to adopt novel medical technologies, comparing users' attitudes in terms of perceived advantages and disadvantages in three technically and culturally different countries: Germany, Poland and Turkey. This investigation also intended to verify if acceptance of information and communication technologies is associated with the sensitive acceptance of E-health. Results revealed overall a considerably higher motivation to use medical technology compared to perceived barriers, with Polish users more willing to use E-health, higher than German or Turkish ones. Older participants showed a highly positive attitude, comparable to young and middle-aged respondents' receptiveness, differing from the latter in terms of greater appreciation of the advantage of higher independency when being supported by medical technology. With respect to gender, woman showed higher motivation to use E-health technology than men, although utilization barriers were not gendered. Following these results, an unconditional transfer of acceptance from information and communication to medical technology is not justified.

  6. Ready, set,...quit exclamation point A review of the controlled-air incinerator

    International Nuclear Information System (INIS)

    Reader, G.E.

    1996-01-01

    The Los Alamos National Laboratory (LANL) Controlled-Air Incinerator (CAI) has had a long and productive past as a research and development tool. It now appears that use of the CAI to treat LANL legacy and other wastes under the Federal Facilities Compliance Act is no longer viable due to numerous programmatic problems. This paper will review the history of the CAI. Various aspects associated with the CAI and how those aspects resulted in the loss of this Department of Energy asset as a viable waste treatment option will also be discussed. Included are past missions and tests-CAI capabilities, emissions, and permits; Federal Facility Compliance Act and associated Agreement; National Environmental Policy Act coverage; cost; budget impacts; public perception; the U.S. Environmental Protection Agency Combustion Strategy; Independent Technical Review open-quotes Redclose quotes Team review; waste treatment alternative technologies; the New Mexico Environment Department; and future options and issues

  7. Mozambique Science, Technology and Innovation Review | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project aims to strengthen the capacity of the Mozambique Ministry of Science and Technology (MOST) to govern the country's science, technology and innovation (STI) system, and of researchers and policymakers to conduct systematic reviews of STI policy implementation. It will do so by supporting a review of the ...

  8. Effects of Ready-to-Eat-Cereals on Key Nutritional and Health Outcomes: A Systematic Review.

    Science.gov (United States)

    Priebe, Marion G; McMonagle, Jolene R

    2016-01-01

    In many countries breakfast cereals are an important component of breakfast. This systematic review assesses the contribution of consumption of ready-to eat cereal (RTEC) to the recommended nutrient intake. Furthermore, the effects of RTEC consumption on key health parameters are investigated as well as health promoting properties of RTEC. The Cochrane Central Register of Controlled Trials, MEDLINE, EMBASE and CINAHL have been searched up till 16th of June 2015. Randomized controlled trials were excluded if RTEC were used during hypocaloric diets, if RTEC were eaten at other times than breakfast and if breakfasts included other products than RTEC, milk and fruit. Observational studies were excluded when "breakfast cereals" were not defined or their definition included cooked cereals. From cross-sectional studies only data concerning energy and nutrient intake as well as micronutrient status were used. From 4727 identified citations 64 publications met the inclusion criteria of which 32 were cross-sectional studies, eight prospective studies and 24 randomized controlled trials. Consumption of RTEC is associated with a healthier dietary pattern, concerning intake of carbohydrates, dietary fiber, fat and micronutrients, however total sugar intake is higher. Persons consuming RTEC frequently (≥ 5 times/week) have a lower risk of inadequate micronutrient intake especially for vitamin A, calcium, folate, vitamin B 6, magnesium and zinc. Evidence from prospective studies suggests that whole grain RTEC may have beneficial effects on hypertension and type 2 diabetes. Consumption of RTEC with soluble fiber helps to reduce LDL cholesterol in hypercholesterolemic men and RTEC fortified with folate can reduce plasma homocysteine. One of the review's strengths is its thorough ex/inclusion of studies. Limitations are that results of observational studies were based on self-reported data and that many studies were funded by food-industry. Consumption of RTEC, especially of fiber

  9. Review of Desiccant Dehumidification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A. A.

    1994-10-01

    This paper overviews applications of desiccant technology for dehumidifying commercial and institutional buildings. Because of various market, policy, and regulatory factors, this technology is especially attractive for dehumidification applications in the I990s.

  10. Review of modern low emissions combustion technologies for aero gas turbine engines

    Science.gov (United States)

    Liu, Yize; Sun, Xiaoxiao; Sethi, Vishal; Nalianda, Devaiah; Li, Yi-Guang; Wang, Lu

    2017-10-01

    Pollutant emissions from aircraft in the vicinity of airports and at altitude are of great public concern due to their impact on environment and human health. The legislations aimed at limiting aircraft emissions have become more stringent over the past few decades. This has resulted in an urgent need to develop low emissions combustors in order to meet legislative requirements and reduce the impact of civil aviation on the environment. This article provides a comprehensive review of low emissions combustion technologies for modern aero gas turbines. The review considers current high Technologies Readiness Level (TRL) technologies including Rich-Burn Quick-quench Lean-burn (RQL), Double Annular Combustor (DAC), Twin Annular Premixing Swirler combustors (TAPS), Lean Direct Injection (LDI). It further reviews some of the advanced technologies at lower TRL. These include NASA multi-point LDI, Lean Premixed Prevaporised (LPP), Axially Staged Combustors (ASC) and Variable Geometry Combustors (VGC). The focus of the review is placed on working principles, a review of the key technologies (includes the key technology features, methods of realising the technology, associated technology advantages and design challenges, progress in development), technology application and emissions mitigation potential. The article concludes the technology review by providing a technology evaluation matrix based on a number of combustion performance criteria including altitude relight auto-ignition flashback, combustion stability, combustion efficiency, pressure loss, size and weight, liner life and exit temperature distribution.

  11. 2016 Building Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Building Technologies Office

    2016-12-01

    The 2016 Building Technologies Office Peer Review Report summarizes the feedback submitted by reviewers of the 67 BTO projects presented at the 2016 BTO Peer Review. The report presents an overview of the goals and activities under each technology program area, a summary of project scores for each program, and a brief analysis of general evaluation trends within each program area or its constituent subprograms.

  12. Nuclear technology review 2005 update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-15

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  13. Nuclear technology review 2005 update

    International Nuclear Information System (INIS)

    2005-08-01

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  14. Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

    Science.gov (United States)

    Gyamfi, Stephen Adu

    2016-01-01

    This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

  15. Effects of self-service technology on customer value and customer readiness: The case of banking industry

    Directory of Open Access Journals (Sweden)

    Parviz Khadem

    2013-07-01

    Full Text Available The recent development on internet banking has contributed to this industry, significantly. People could do their banking transactions by clicking a bottom and transfer funds, pay bills, etc. In this paper, we present an empirical investigation to find out the effects of different factors on continuous internet banking. The proposed study of this paper has adopted a questionnaire, which was originally developed by Ho and Ko (2008 [Ho, S. H., & Ko, Y. Y. (2008. Effects of self-service technology on customer value and customer readiness: The case of Internet banking. Internet Research, 18(4, 427-446.]. We have used Pearson correlation test as well as stepwise regression techniques to verify the effect of different factors and the results of our survey show that four variables of easy implementation, usefulness, cost reduction and self-control positively influence continuous internet banking.

  16. Occupational therapy students' technological skills: Are 'generation Y' ready for 21st century practice?

    Science.gov (United States)

    Hills, Caroline; Ryan, Susan; Smith, Derek R; Warren-Forward, Helen; Levett-Jones, Tracy; Lapkin, Samuel

    2016-12-01

    Technology is becoming increasingly integral to the practice of occupational therapists and part of the everyday lives of clients. 'Generation Y' are purported to be naturally technologically skilled as they have grown up in the digital age. The aim of this study was to explore one cohort of 'Generation Y' occupational therapy students' skills and confidence in the use of technologies relevant to contemporary practice. A cross-sectional survey design was used to collect data from a cohort of 274 students enrolled in an Australian undergraduate occupational therapy programme. A total of 173 (63%) students returned the survey. Those born prior to 1982 were removed from the data. This left 155 (56%) 'Generation Y' participants. Not all participants reported to be skilled in everyday technologies although most reported to be skilled in word, Internet and mobile technologies. Many reported a lack of skills in Web 2.0 (collaboration and sharing) technologies, creating and using media and gaming, as well as a lack of confidence in technologies relevant to practice, including assistive technology, specialist devices, specialist software and gaming. Overall, the results suggested that this group of 'Generation Y' students were not universally skilled in all areas of technology relevant to practice but appear to be skilled in technologies they use regularly. Recommendations are therefore made with view to integrating social networking, gaming, media sharing and assistive technology into undergraduate programmes to ensure that graduates have the requisite skills and confidence required for current and future practice. © 2016 Occupational Therapy Australia.

  17. New nuclear technology; International developments. Review 1995

    International Nuclear Information System (INIS)

    Devell, L.; Aggeryd, I.; Hultgren, Aa.; Lundell, B.; Pedersen, T.

    1995-09-01

    A summary review of the development of new nuclear rector technology is presented in this report. Fuel cycle strategies and waste handling developments are also commented. Different plans for dismantling nuclear weapons are presented. 18 refs

  18. 2013 Bioenergy Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2014-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2013 U.S. Department of Energy Bioenergy Technologies Office's Peer Review meeting.

  19. Geothermal Technologies Program Overview - Peer Review Program

    Energy Technology Data Exchange (ETDEWEB)

    Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  20. Factors related to self-directed learning readiness of students in health professional programs: A scoping review.

    Science.gov (United States)

    Slater, Craig E; Cusick, Anne

    2017-05-01

    Academic and professional drivers have stimulated interest in self-directed learning of students in pre-certification health professional programs. Particular attention has focussed on factors which may influence a students' readiness for self-directed learning. A five stage structured scoping review of published literature was conducted to identify measures of self-directed learning readiness used with students in pre-certification health professional programs and those factors that have been investigated as potential determinants. Relevant articles were identified in six databases using key search terms and a search strategy. Two independent reviewers used criteria to cull irrelevant sources. Articles which met eligibility criteria were charted. The final analysis included 49 articles conducted in nursing, medicine, physiotherapy, pharmacy, occupational therapy and dentistry cohorts. Twenty-one potential determinants had been investigated with gender, year level, age program delivery and previous education level the most common. Self-directed learning readiness has been of interest globally, mostly in medicine and nursing, and studies have nearly exclusively used one of two instruments. There is nascent evidence that age, year level and previous education level may have positive influence. These factors have in common the passing of time and may in fact be proxy for more encompassing developmental or social constructs. Further research is needed particularly in the allied health professions where there is limited research in very few disciplines. Studies in interprofessional contexts may be an efficient approach to increasing the knowledge base. Further work is also warranted to determine appropriate use of the two instruments across the range of health disciplines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. The Impact of Student Teaching Experience on Pre-Service Teachers' Readiness for Technology Integration: A Mixed Methods Study with Growth Curve Modeling

    Science.gov (United States)

    Sun, Yan; Strobel, Johannes; Newby, Timothy J.

    2017-01-01

    Adopting a two-phase explanatory sequential mixed methods research design, the current study examined the impact of student teaching experiences on pre-service teachers' readiness for technology integration. In phase-1 of quantitative investigation, 2-level growth curve models were fitted using online repeated measures survey data collected from…

  2. Energy technology review, July--August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.C. (ed.)

    1991-01-01

    This issue of Energy Technology Review'' gives the annual review of the programs at Lawrence Livermore National Laboratory. This State of the Laboratory issue includes discussions of all major programs: Defense Systems; Laser Research; Magnetic Fusion Energy; Energy and Earth Sciences; Environmental Technology Program; Biomedical and Environmental Science; Engineering; Physics; Chemistry and Materials Science; Computations; and Administrative and Institutional Services. An index is also given of the 1991 achievements with contact names and telephone number.

  3. Forward Technology Solar Cell Experiment (FTSCE) for MISSE-5 Verified and Readied for Flight on STS-114

    Science.gov (United States)

    Jenkins, Phillip P.; Krasowski, Michael J.; Greer, Lawrence C.; Flatico, Joseph M.

    2005-01-01

    The Forward Technology Solar Cell Experiment (FTSCE) is a space solar cell experiment built as part of the Fifth Materials on the International Space Station Experiment (MISSE-5): Data Acquisition and Control Hardware and Software. It represents a collaborative effort between the NASA Glenn Research Center, the Naval Research Laboratory, and the U.S. Naval Academy. The purpose of this experiment is to place current and future solar cell technologies on orbit where they will be characterized and validated. This is in response to recent on-orbit and ground test results that raised concerns about the in-space survivability of new solar cell technologies and about current ground test methodology. The various components of the FTSCE are assembled into a passive experiment container--a 2- by 2- by 4-in. folding metal container that will be attached by an astronaut to the outer structure of the International Space Station. Data collected by the FTSCE will be relayed to the ground through a transmitter assembled by the U.S. Naval Academy. Data-acquisition electronics and software were designed to be tolerant of the thermal and radiation effects expected on orbit. The experiment has been verified and readied for flight on STS-114.

  4. Preparing Beginning Teachers for Technology Integration in Education: Ready for Take-Off?

    Science.gov (United States)

    Tondeur, Jo; Pareja Roblin, Natalie; van Braak, Johan; Voogt, Joke; Prestridge, Sarah

    2017-01-01

    The overall aims of this study are to explore (1) how beginning teachers integrate technology in their practice and (2) the connections between teachers' technology uses and their pre-service education programmes. Data of this follow-up study were collected through in-depth interviews with beginning teachers. The results reveal that all beginning…

  5. E-health readiness assessment framework in iran.

    Science.gov (United States)

    Rezai-Rad, M; Vaezi, R; Nattagh, F

    2012-01-01

    Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well.

  6. E-Health Readiness Assessment Framework in Iran

    Science.gov (United States)

    Rezai-Rad, M; Vaezi, R; Nattagh, F

    2012-01-01

    Background: Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. Methods: The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. Results: The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). Conclusion: The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well. PMID:23304661

  7. The state of knowledge on technologies and their use for fall detection: A scoping review.

    Science.gov (United States)

    Lapierre, N; Neubauer, N; Miguel-Cruz, A; Rios Rincon, A; Liu, L; Rousseau, J

    2018-03-01

    Globally, populations are aging with increasing life spans. The normal aging process and the resulting disabilities increase fall risks. Falls are an important cause of injury, loss of independence and institutionalization. Technologies have been developed to detect falls and reduce their consequences but their use and impact on quality of life remain debatable. Reviews on fall detection technologies exist but are not extensive. A comprehensive literature review on the state of knowledge of fall detection technologies can inform research, practice, and user adoption. To examine the extent and the diversity of current technologies for fall detection in older adults. A scoping review design was used to search peer-reviewed literature on technologies to detect falls, published in English, French or Spanish since 2006. Data from the studies were analyzed descriptively. The literature search identified 3202 studies of which 118 were included for analysis. Ten types of technologies were identified ranging from wearable (e.g., inertial sensors) to ambient sensors (e.g., vision sensors). Their Technology Readiness Level was low (mean 4.54 SD 1.25; 95% CI [4.31, 4.77] out of a maximum of 9). Outcomes were typically evaluated on technological basis and in controlled environments. Few were evaluated in home settings or care units with older adults. Acceptability, implementation cost and barriers were seldom addressed. Further research should focus on increasing Technology Readiness Levels of fall detection technologies by testing them in real-life settings with older adults. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Smart homes and home health monitoring technologies for older adults: A systematic review.

    Science.gov (United States)

    Liu, Lili; Stroulia, Eleni; Nikolaidis, Ioanis; Miguel-Cruz, Antonio; Rios Rincon, Adriana

    2016-07-01

    Around the world, populations are aging and there is a growing concern about ways that older adults can maintain their health and well-being while living in their homes. The aim of this paper was to conduct a systematic literature review to determine: (1) the levels of technology readiness among older adults and, (2) evidence for smart homes and home-based health-monitoring technologies that support aging in place for older adults who have complex needs. We identified and analyzed 48 of 1863 relevant papers. Our analyses found that: (1) technology-readiness level for smart homes and home health monitoring technologies is low; (2) the highest level of evidence is 1b (i.e., one randomized controlled trial with a PEDro score ≥6); smart homes and home health monitoring technologies are used to monitor activities of daily living, cognitive decline and mental health, and heart conditions in older adults with complex needs; (3) there is no evidence that smart homes and home health monitoring technologies help address disability prediction and health-related quality of life, or fall prevention; and (4) there is conflicting evidence that smart homes and home health monitoring technologies help address chronic obstructive pulmonary disease. The level of technology readiness for smart homes and home health monitoring technologies is still low. The highest level of evidence found was in a study that supported home health technologies for use in monitoring activities of daily living, cognitive decline, mental health, and heart conditions in older adults with complex needs. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  9. Hazards Control Department annual technology review, 1984

    International Nuclear Information System (INIS)

    Griffith, R.V.; Anderson, K.J.

    1985-01-01

    The Annual Technology Review covers the period from October 1983 to September 1984. Topics reviewed include Nuclear Criticality Information System, nuclear dosimetry, personnel dosimetry, laser chemistry, electric filters and neutron spectrometry. Individual papers are indexed and abstracted for the data base. (DT)

  10. An Investigation to Advance the Technology Readiness Level of the Centaur Derived On-orbit Propellant Storage and Transfer System

    Science.gov (United States)

    Silvernail, Nathan L.

    This research was carried out in collaboration with the United Launch Alliance (ULA), to advance an innovative Centaur-based on-orbit propellant storage and transfer system that takes advantage of rotational settling to simplify Fluid Management (FM), specifically enabling settled fluid transfer between two tanks and settled pressure control. This research consists of two specific objectives: (1) technique and process validation and (2) computational model development. In order to raise the Technology Readiness Level (TRL) of this technology, the corresponding FM techniques and processes must be validated in a series of experimental tests, including: laboratory/ground testing, microgravity flight testing, suborbital flight testing, and orbital testing. Researchers from Embry-Riddle Aeronautical University (ERAU) have joined with the Massachusetts Institute of Technology (MIT) Synchronized Position Hold Engage and Reorient Experimental Satellites (SPHERES) team to develop a prototype FM system for operations aboard the International Space Station (ISS). Testing of the integrated system in a representative environment will raise the FM system to TRL 6. The tests will demonstrate the FM system and provide unique data pertaining to the vehicle's rotational dynamics while undergoing fluid transfer operations. These data sets provide insight into the behavior and physical tendencies of the on-orbit refueling system. Furthermore, they provide a baseline for comparison against the data produced by various computational models; thus verifying the accuracy of the models output and validating the modeling approach. Once these preliminary models have been validated, the parameters defined by them will provide the basis of development for accurate simulations of full scale, on-orbit systems. The completion of this project and the models being developed will accelerate the commercialization of on-orbit propellant storage and transfer technologies as well as all in

  11. State of the technology review

    International Nuclear Information System (INIS)

    Spino, J.

    1998-01-01

    This paper presents a review of different behaviours of fuel elements in relation to fission gases. The influence of the fission gas level and its location regarding differential fuel structures is commented. The gas release process at high burnup is described and some topics that need to be further investigated are suggested. (author)

  12. Review of nonconventional bioreactor technology

    Energy Technology Data Exchange (ETDEWEB)

    Turick, C.E.; Mcllwain, M.E.

    1993-09-01

    Biotechnology will significantly affect many industrial sectors in the future. Industrial sectors that will be affected include pharmaceutical, chemical, fuel, agricultural, and environmental remediation. Future research is needed to improve bioprocessing efficiency and cost-effectiveness in order to compete with traditional technologies. This report describes recent advances in bioprocess technologies and bioreactor designs and relates them to problems encountered in many industrial bioprocessing operations. The primary focus is directed towards increasing gas and vapor transfer for enhanced bioprocess kinetics as well as unproved by-product separation and removal. The advantages and disadvantages of various conceptual designs such as hollow-fiber, gas-phase, hyperbaric/hypobaric, and electrochemical bioreactors are also discussed. Specific applications that are intended for improved bioprocesses include coal desulfurization, coal liquefaction, soil bioremediation, biomass conversion to marketable chemicals, biomining, and biohydrometallurgy as well as bioprocessing of gases and vapors.

  13. Science & Technology Review September 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-07-24

    This month's issue has the following articles: (1) Remembering the Laboratory's First Director - Commentary by Harold Brown; (2) Herbert F. York (1921-2009): A Life of Firsts, an Ambassador for Peace - The Laboratory's first director, who died on May 19, 2009, used his expertise in science and technology to advance arms control and prevent nuclear war; (3) Searching for Life in Extreme Environments - DNA will help researchers discover new marine species and prepare to search for life on other planets; (4) Energy Goes with the Flow - Lawrence Livermore is one of the few organizations that distills the big picture about energy resources and use into a concise diagram; and (5) The Radiant Side of Sound - An experimental method that converts sound waves into light may lead to new technologies for scientific and industrial applications.

  14. Individual motivation and threat indicators of collaboration readiness in scientific knowledge producing teams: a scoping review and domain analysis

    Directory of Open Access Journals (Sweden)

    Gaetano R. Lotrecchiano

    2016-05-01

    Full Text Available This paper identifies a gap in the team science literature that considers intrapersonal indicators of collaboration as motivations and threats to participating in collaborative knowledge producing teams (KPTs. Through a scoping review process, over 150 resources were consulted to organize 6 domains of motivation and threat to collaboration in KPTs: Resource Acquisition, Advancing Science, Building Relationships, Knowledge Transfer, Recognition and Reward, and Maintenance of Beliefs. Findings show how domains vary in their presentation of depth and diversity of motivation and threat indicators as well as their relationship with each other within and across domains. The findings of 51 indicators resulting from the review provide a psychosocial framework for which to establish a hierarchy of collaborative reasoning for individual engagement in KPTs thus allowing for further research into the mechanism of collaborative engagement. The indicators serve as a preliminary step in establishing a protocol for testing of the psychometric properties of intrapersonal measures of collaboration readiness.

  15. Review of Potential Wind Tunnel Balance Technologies

    Science.gov (United States)

    Burns, Devin E.; Williams, Quincy L.; Phillips, Ben D.; Commo, Sean A.; Ponder, Jonathon D.

    2016-01-01

    This manuscript reviews design, manufacture, materials, sensors, and data acquisition technologies that may benefit wind tunnel balances for the aerospace research community. Current state-of-the-art practices are used as the benchmark to consider advancements driven by researcher and facility needs. Additive manufacturing is highlighted as a promising alternative technology to conventional fabrication and has the potential to reduce both the cost and time required to manufacture force balances. Material alternatives to maraging steels are reviewed. Sensor technologies including piezoresistive, piezoelectric, surface acoustic wave, and fiber optic are compared to traditional foil based gages to highlight unique opportunities and shared challenges for implementation in wind tunnel environments. Finally, data acquisition systems that could be integrated into force balances are highlighted as a way to simplify the user experience and improve data quality. In summary, a rank ordering is provided to support strategic investment in exploring the technologies reviewed in this manuscript.

  16. PSYCHOLOGICAL STRATEGY OF COOPERATION, MOTIVATIONAL, INFORMATION AND TECHNOLOGICAL COMPONENTS OF FUTURE HUMANITARIAN TEACHER READINESS FOR PROFESSIONAL ACTIVITY IN POLYSUBJECTIVE LEARNING ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Y. Spivakovska

    2014-04-01

    Full Text Available Redefining of modern information and communication technologies (ICT from teaching aids to teaching process subjects, continuous growth of their subjectivity necessary demands appropriate knowledge, skills, appropriate attitude to didactic capabilities of ICT, ability to cooperate with them and to build pupils learning activity aimed at formation and development of self organization, self development skills, promoting their subjective position in getting education that will be readiness of modern teacher to organize effective professional activities in polysubjective learning environment (PLE. The new tasks of humanitarian teacher related to self selection and design of educational content as well as the modeling of the learning process in conditions of PLE virtualized alternatives choice, impose special requirements to professionally important teacher’s personality qualities, rather to his readiness to implement effective professional work in such conditions. In this article the essence of future humanitarian teacher readiness concept to professional activity in polysubjective educational environment is proved. The structure of the readiness is analyzed. Psychological strategy of cooperation, reflective, motivational and informational partials are substantiated and characterized as components of the future humanitarian teacher readiness to professional activities in polysubjective educational environment.

  17. The antecedents of e-learning outcome: an examination of system quality, technology readiness, and learning behavior.

    Science.gov (United States)

    Ho, Li-An

    2009-01-01

    The rapid advancement of Internet and computer technology has not only influenced the way we live, but also the way we learn. Due to the implementation of e-learning in urban junior high schools in Taiwan, it has become essential to find out how external and internal factors affect junior high school students' online learning behavior, which consequently affects their learning outcome. The present study aims to propose a conceptual structural equation model to investigate the relationships among e-Learning system quality (eLSQ), technology readiness (TR), learning behavior (LB), and learning outcome (LO), and to demonstrate the direct and indirect effect of eLSQ and TR on LO from the perspectives of LB. Data collected from 10 urban junior high schools in Taiwan (N = 376) were analyzed using structural equation modeling. Results reveal that both eLSQ and TR have a direct and significant impact on LB. However, eLSQ and TR influence LO indirectly through LB. In addition, LB has a direct and positive significant influence on LO. Managerial implications are proposed and research limitations are discussed.

  18. Fiber-optic technology review

    International Nuclear Information System (INIS)

    Lyons, P.B.

    1980-01-01

    A history of fiber technology is presented. The advantages of fiber optics are discussed (bandwidth, cost, weight and size, nonmetallic construction and isolation). Some aspects of the disadvantages of fiber systems briefly discussed are fiber and cable availability, fiber components, radiation effects, receivers and transmitters, and material dispersion. Particular emphasis over the next several years will involve development of fibers and systems optimized for use at wavelengths near 1.3 μm and development of wavelengths multiplexers for simultaneous system operation at several wavelengths

  19. Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

    Science.gov (United States)

    Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

    2010-01-01

    Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the

  20. Energy & Technology Review, March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Quirk, W.J.; Canada, J.; de Vore, L.; Gleason, K.; Kirvel, R.D.; Kroopnick, H.; McElroy, L.; Van Dyke, P. [eds.

    1994-03-01

    This monthly report of research activities at Lawrence Livermore Laboratory highlights three different research programs. First, the Forensic Science Center supports a broad range of analytical techniques that focus on detecting and analyzing chemical, biological, and nuclear species. Analyses are useful in the areas of nonproliferation, counterterrorism, and law enforcement. Second, starting in 1977, the laboratory initiated a series of studies to understand a high incidence of melanoma among employees. Continued study shows that mortality from this disease has decreased from the levels seen in the 1980`s. Third, to help coordinate the laboratory`s diverse research projects that can provide better healthcare tools to the public, the lab is creating the new Center for Healthcare Technologies.

  1. Science & Technology Review December 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-10-24

    This month's issue has the following articles: (1) Homeland Security Begins Abroad--Commentary by John C. Doesburg; (2) Out of Harm's Way--New physical protection and accountability systems, together with a focus on security, safeguard nuclear materials in the Russian Federation; (3) A Calculated Journey to the Center of the Earth--Determining the permeability of partially melted metals in a mineral matrix unlocks secrets about the formation of Earth's core; (4) Wireless That Works--Communication technologies using ultrawideband radar are improving national security; and (5) Power to the People--Edward Teller envisioned safe and plentiful nuclear power for peaceful applications.

  2. Science & Technology Review March 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2010-01-29

    This month's issue has the following articles: (1) Countering the Growing Chem-Bio Threat -- Commentary by Penrose (Parney) C. Albright; (2) Responding to a Terrorist Attack Involving Chemical Warfare Agents -- Livermore scientists are helping the nation strengthen plans to swiftly respond to an incident involving chemical warfare agents; (3) Revealing the Secrets of a Deadly Disease -- A Livermore-developed system helps scientists better understand how plague bacteria infect healthy host cells; (4) A New Application for a Weapons Code -- Simulations reveal for the first time how blast waves cause traumatic brain injuries; (5) Testing Valuable National Assets for X-Ray Damage -- Experiments at the National Ignition Facility are measuring the effects of radiation on critical systems; and (6) An Efficient Way to Harness the Sun's Power -- New solar thermal technology is designed to supply residential electric power at nearly half of the current retail price.

  3. 2013 Geothermal Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Geothermal Technologies Office

    2014-01-01

    Geothermal Technologies Office conducted its annual program peer review in April of 2013. The review provided an independent, expert evaluation of the technical progress and merit of GTO-funded projects. Further, the review was a forum for feedback and recommendations on future GTO strategic planning. During the course of the peer review, DOE-funded projects were evaluated for 1) their contribution to the mission and goals of the GTO and 2) their progress against stated project objectives. Principal Investigators (PIs) came together in sessions organized by topic “tracks” to disseminate information, progress, and results to a panel of independent experts as well as attendees.

  4. Geothermal Technologies Program 2011 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Hollett, Douglas [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Stillman, Greg [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-01

    On June 6-10, 2011, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (GTP or the Program) conducted its annual program peer review in Bethesda, Maryland. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the program and is a forum for feedback and recommendations on future program planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the Program and to assess progress made against stated objectives.

  5. Investigation of Pre-Service Teachers' Levels of Readiness to Technology Integration in Education

    Science.gov (United States)

    Cuhadar, Cem

    2018-01-01

    This study aims to expose the training and experience that pre-service teachers acquire in the course of their study at schools of education in regard to the use of information and communication technology (ICT). The study adopts the survey model and its sampling is comprised of 832 pre-service teachers who attend four different faculty of…

  6. Are We Ready for the Virtual Library? Technology Push, Market Pull and Organisational Response.

    Science.gov (United States)

    Gilbert, J. D.

    1993-01-01

    Discusses virtual libraries, i.e., library services available to users via personal computers; considers the issues of technological development, user demands, and organizational response; and describes progress toward virtual libraries in the Netherlands, including networks, online systems, navigation tools, subject classification, coordination…

  7. Information technology for medication administration: assessing bedside readiness among nurses in Lebanon

    NARCIS (Netherlands)

    Marini, Sana Daya; Hasman, Arie; Huijer, Huda Abu-Saad

    2009-01-01

    Medication errors continue to be of great concern to hospitals. The use of Information technology (IT) for medication administration was recommended to assist nurses to administer medications safely, decrease the chance of medication errors, and contribute to patient safety. Such IT will be

  8. An Investigation of University Student Readiness Towards M-Learning Using Technology Acceptance Model

    Science.gov (United States)

    Iqbal, Shakeel; Bhatti, Zeeshan Ahmed

    2015-01-01

    M-learning is learning delivered via mobile devices and mobile technology. The research indicates that this medium of learning has potential to enhance formal as well as informal learning. However, acceptance of m-learning greatly depends upon the personal attitude of students towards this medium; therefore this study focuses only on the…

  9. FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

    International Nuclear Information System (INIS)

    George Rizeq; Ravi Kumar; Janice West; Vitali Lissianski; Neil Widmer; Vladimir Zamansky

    2001-01-01

    It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE-EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H(sub 2) and sequestration-ready CO(sub 2) from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE-EER was awarded a Vision-21 program from U.S. DOE NETL to develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE-EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO(sub 2), and (3) high temperature/pressure oxygen depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H(sub 2) energy outputs relative to the higher heating value of coal. The three-year R and D program will determine the operating conditions that maximize separation of CO(sub 2) and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the 1st quarterly progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program

  10. FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

    Energy Technology Data Exchange (ETDEWEB)

    George Rizeq; Janice West; Arnaldo Frydman; Vladimir Zamansky; Linda Denton; Hana Loreth; Tomasz Wiltowski

    2001-07-01

    It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision-21 program from U.S. DOE NETL to develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the third quarterly technical progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program

  11. Ultrasonication and food technology: A review

    Directory of Open Access Journals (Sweden)

    Ishrat Majid

    2015-12-01

    Full Text Available With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extraction, drying, filtration, emulsification, sterilization, cutting, etc. Ultrasound is being applied as an effective preservation tool in many food-processing fields viz. vegetables and fruits, cereal products, honey, gels, proteins, enzymes, microbial inactivation, cereal technology, water treatment, diary technology, etc. This review summarizes the latest knowledge on impact and application of ultrasound in food technology.

  12. Dry tree semisubmersible platform: from 'technology accepted' to 'project ready'

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Roger; Wang, Tao; Nygaard, Magne; Bendiksen, Rolf [Aker Solutions, Oslo (Norway)

    2012-07-01

    Development of new technologies for application of dry tree solutions on semi-submersible hull production platforms opens up new flexible and cost efficient solutions for oil and gas fields in deep and ultra deep water. Aker Solutions has brought the technology through the last steps to a project ready stage. Top tension risers allow for shifting the Christmas tree from seabed to topside, and enables drilling and production from the same unit. By shifting the wellhead and Christmas tree from seabed to platform deck, well maintenance is simplified, and makes the Dry Tree Semi relevant to consider for the Brazilian pre-salt reservoirs. Easy access to the wells for maintenance gives a potential for a higher recovery rate for the field. Future development of ultra deep water oil and gas fields demands solutions overcoming the limitations set by the TLP and the Spar buoy. Combining knowledge from already proven solutions, and a limited addition of new technology, these limitations are overcome with Aker Solutions' Dry Tree Semi. It is designed and proven for Gulf of Mexico environmental conditions. It is verified for conditions with a significant wave height of 14 meters, and able to withstand 100-year extreme weather and 1000-years survival conditions. A conventional semi-submersible platform, but with a deeper draft to further reduce the already low motions, makes the basis for the concept. Top tensioned risers (TTR) with vertical motion compensation stroke of up to 10 meters, makes it possible to shift the Christmas tree from seabed to platform deck. The deep draft design of the hull reduces the wave force excitation on the pontoons, reducing both the roll and pitch dynamics. The Dry Tree Semi represents several major benefits, including low sensitivity to water depth, reduced hull and topside weight, and flexibility in transportation, mooring, and decommissioning. (author)

  13. Science & Technology Review June 2012

    Energy Technology Data Exchange (ETDEWEB)

    Poyneer, L A

    2012-04-20

    This month's issue has the following articles: (1) A New Era in Climate System Analysis - Commentary by William H. Goldstein; (2) Seeking Clues to Climate Change - By comparing past climate records with results from computer simulations, Livermore scientists can better understand why Earth's climate has changed and how it might change in the future; (3) Finding and Fixing a Supercomputer's Faults - Livermore experts have developed innovative methods to detect hardware faults in supercomputers and help applications recover from errors that do occur; (4) Targeting Ignition - Enhancements to the cryogenic targets for National Ignition Facility experiments are furthering work to achieve fusion ignition with energy gain; (5) Neural Implants Come of Age - A new generation of fully implantable, biocompatible neural prosthetics offers hope to patients with neurological impairment; and (6) Incubator Busy Growing Energy Technologies - Six collaborations with industrial partners are using the Laboratory's high-performance computing resources to find solutions to urgent energy-related problems.

  14. Cognitive Readiness

    National Research Council Canada - National Science Library

    Morrison, John

    2002-01-01

    Cognitive readiness is described as the mental preparation an individual needs to establish and sustain competent performance in the complex and unpredictable environment of modern military operations...

  15. System Verification Through Reliability, Availability, Maintainability (RAM) Analysis & Technology Readiness Levels (TRLs)

    Energy Technology Data Exchange (ETDEWEB)

    Emmanuel Ohene Opare, Jr.; Charles V. Park

    2011-06-01

    The Next Generation Nuclear Plant (NGNP) Project, managed by the Idaho National Laboratory (INL), is authored by the Energy Policy Act of 2005, to research, develop, design, construct, and operate a prototype fourth generation nuclear reactor to meet the needs of the 21st Century. A section in this document proposes that the NGNP will provide heat for process heat applications. As with all large projects developing and deploying new technologies, the NGNP is expected to meet high performance and availability targets relative to current state of the art systems and technology. One requirement for the NGNP is to provide heat for the generation of hydrogen for large scale productions and this process heat application is required to be at least 90% or more available relative to other technologies currently on the market. To reach this goal, a RAM Roadmap was developed highlighting the actions to be taken to ensure that various milestones in system development and maturation concurrently meet required availability requirements. Integral to the RAM Roadmap was the use of a RAM analytical/simulation tool which was used to estimate the availability of the system when deployed based on current design configuration and the maturation level of the system.

  16. Are health centers in Thailand ready for health information technology? : a national survey.

    Science.gov (United States)

    Kijsanayotin, Boonchai; Speedie, Stuart

    2006-01-01

    The Thailand universal health care coverage scheme was instituted in 2001 and The Thailand Ministry of Public Health (MOPH) is restructuring its information systems to support this reform. The MOPH anticipates developing computerized health information systems which can provide information for administration tasks and can improve both healthcare delivery and public health services. To achieve these target goals, knowledge about users and organizations is vital. The knowledge of how health center workers currently use information technology (IT), their knowledge of IT, and acceptance of IT are not only beneficial to policy makers but also to system designers and implementers. The primary objective of this study is to learn how health centers in Thailand use IT, the level of basic IT knowledge among their workers, and their acceptance of health IT. We surveyed a random cross sectional sample of 1,607 health centers representing the total of 9,806 in Thailand in 2005. With an 82% response rate, the preliminary results indicate that information technology usage is pervasive in health centers. The respondents showed a moderately high degree of health information technology acceptance with a modest level of basic IT knowledge. There were no differences in degrees of acceptance among the four geographic regions. The mean score of "intention to use IT" was 5.6 on a scale of 7 and the average basic IT knowledge score was 13 out of 20. These results suggests the possibility of project success if the national health center information system projects are developed and implemented.

  17. First Commercial US Mixed Waste Vitrification Facility: Permits, Readiness Reviews, and Delisting of Final Wasteform

    International Nuclear Information System (INIS)

    Pickett, J.B.; Norford, S.W.; Diener, G.A.

    1998-01-01

    Westinghouse Savannah River Co. (WSRC) contracted GTS Duratek (Duratek) to construct and operate the first commercial vitrification facility to treat an F-006 mixed (radioactive/hazardous) waste in the United States. The permits were prepared and submitted to the South Carolina state regulators by WSRC - based on a detailed design by Duratek. Readiness Assessments were conducted by WSRC and Duratek at each major phase of the operation (sludge transfer, construction, cold and radioactive operations, and a major restart) and approved by the Savannah River Department of Energy prior to proceeding. WSRC prepared the first 'Upfront Delisting' petition for a vitrified mixed waste. Lessons learned with respect to the permit strategy, operational assessments, and delisting from this 'privatization' project will be discussed

  18. The Effective Use of System and Software Architecture Standards for Software Technology Readiness Assessments

    Science.gov (United States)

    2011-05-01

    icons, mouse- control and network paradigms. Successfully directed engineering and quality process development on all levels of the enterprise. As...Actual system proven through successful mission operations A t l t l t d d lifi d th h t t d TRL 9 TRL 8 c ua sys em comp e e an qua e roug es an...A Software Technology Example • Net Centricity – a typical, new mission requirement – Network Centric Warfare (NCW) • NCW is a state-of-the art war

  19. Science, Technology, Engineering and Math Readiness: Ethno-linguistic and gender differences in high-school course selection patterns

    Science.gov (United States)

    Adamuti-Trache, Maria; Sweet, Robert

    2014-03-01

    The study examines science-related course choices of high-school students in the culturally diverse schools of the province of British Columbia, Canada. The analysis employs K-12 provincial data and includes over 44,000 students born in 1990 who graduated from high school by 2009. The research sample reflects the presence of about 27% of students for whom English is not a first language. We construct an empirical model that examines ethno-linguistic and gender differences in Grade 12 course choices while accounting for personal and situational differences among students. The study employs a course selection typology that emphasizes readiness for science, technology, engineering and math fields of study. Findings indicate that math- and science-related course selection patterns are strongly associated with ethnicity, qualified not only by gender and prior math and science achievement but also by the individual's grade level at entry to the system and enrollment in English as a Second Language program. Students who are more likely to engage in math and science courses belong to Asian ethno-linguistic groups and entered the provincial school system during the senior high-school years. We suggest that ethnic diversity and broader academic exposure may play a crucial role in changing the gender composition of science classrooms, university fields of study and science-related occupations.

  20. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R); TOPICAL

    International Nuclear Information System (INIS)

    Unknown

    1999-01-01

    In the early 90's GE recognized the need to introduce new technology to follow on to the ''F'' technology the Company introduced in 1988. By working with industry and DOE, GE helped shape the ATS program goal of demonstrating a gas turbine, combined-cycle system using natural gas as the primary fuel that achieves the following targets: system efficiency exceeding 60% lower heating value basis; environmental superiority under full-load operating conditions without the use of post-combustion emissions controls, environmental superiority includes limiting NO(sub 2) to less than 10 parts per mission by volume (dry basis) at 15% oxygen; busbar energy costs that are 10% less than current state-of-the-art turbine systems meeting the same environmental requirements; fuel-flexible designs operating on natural gas but also capable of being adapted to operate on coal-based, distillate, or biomass fuels; reliability-availability-maintainability (RAM) that is equivalent to modern advanced power generation systems; and commercial systems that could enter the market in the year 2000

  1. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-09-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

  2. Science & Technology Review January/February 2017

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-12

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  3. Science & Technology Review October/November 2015

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-11-05

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  4. Review of infrared scene projector technology-1993

    Science.gov (United States)

    Driggers, Ronald G.; Barnard, Kenneth J.; Burroughs, E. E.; Deep, Raymond G.; Williams, Owen M.

    1994-07-01

    The importance of testing IR imagers and missile seekers with realistic IR scenes warrants a review of the current technologies used in dynamic infrared scene projection. These technologies include resistive arrays, deformable mirror arrays, mirror membrane devices, liquid crystal light valves, laser writers, laser diode arrays, and CRTs. Other methods include frustrated total internal reflection, thermoelectric devices, galvanic cells, Bly cells, and vanadium dioxide. A description of each technology is presented along with a discussion of their relative benefits and disadvantages. The current state of each methodology is also summarized. Finally, the methods are compared and contrasted in terms of their performance parameters.

  5. Science & Technology Review January/February 2016

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  6. Final Report of the NASA Technology Readiness Assessment (TRA) Study Team

    Science.gov (United States)

    Hirshorn, Steven; Jefferies, Sharon

    2016-01-01

    The material in this report covers the results on the NASA-wide TRA team, who are responsible for ascertaining the full extent of issues and ambiguities pertaining to TRATRL and to provide recommendations for mitigation. The team worked for approximately 6 months to become knowledgeable on the current TRATRL process and guidance and to derive recommendations for improvement.The team reviewed the TRA processes of other government agencies (OGA), including international agencies, and found that while the high-level processes are similar, the NASA process has a greater level of detail. Finally, NASA’s HQ OCT continues to monitor the GAO’s efforts to produce a TRA Best Practices Guide, a draft of which was received in February 2016. This Guide could impact the recommendations of this report.

  7. Review of containment vent filter technology

    International Nuclear Information System (INIS)

    Kovach, J.L.

    1989-01-01

    The technology applied for the design and construction of containment vent filters is compiled and reviewed. The national positions leading to the selection of venting or method of filtration are extracted from position papers. Several areas of further information needs are identified

  8. Book review Information and Communication Technologies for ...

    African Journals Online (AJOL)

    Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256. Article Metrics. No metrics ...

  9. Book review Information and Communication Technologies for ...

    African Journals Online (AJOL)

    Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256.

  10. Geothermal Technologies Office 2012 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-04-01

    On May 7-10, 2012, the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Geothermal Technologies Office conducted its annual program peer review in Westminster, CO. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the office and is a forum for feedback and recommendations on future office planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the office and to assess progress made against stated objectives. Project scoring results, expert reviewer comments, and key findings and recommendations are included in this report.

  11. The readiness of teachers to integrate information and communication technology for learning in a selected school in the GautengOnline project.

    OpenAIRE

    2008-01-01

    This study is aimed at providing the reader with a detailed description of the readiness of teachers to integrate Information and Communication Technology (ICT) for learning in a selected school in the GautengOnline (GoL) Project, through qualitative research design that used various data collecting methods: Questionnaire, observations and interview. A large number of teachers showed some interest in using ICT learning but had difficulties on how to get started due to the lack of suitable ICT...

  12. Advanced conversion technology review panel report

    International Nuclear Information System (INIS)

    Frazier, T.A.

    1998-01-01

    The Department of Energy (DOE), the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) established a DOE lead management team and an Advanced Conversion Technology Review Panel. The panel was tasked with providing the management team with an assessment and ranking of the three advanced conversion technologies. The three advanced conversion technologies were alkali metal thermal to electric converter (AMTEC), Stirling engine converter (SEC), and thermophotovoltaic (TPV). To rate and rank these three technologies, five criteria were developed: (1) Performance, (2) Development and Cost/Production and Cost/Schedule Risk, (3) Spacecraft Interface and Operations, (4) Ability to Scale Conversion, and (5) Safety. Discussed are the relative importance of each of these criteria and the rankings of the three advanced conversion technologies. It was the conclusion of the panel that the technology decision should be based on the risk that DOE and NASA are willing to accept. SEC is the most mature technology and would provide the lowest risk option. However, if more risk is acceptable, AMTEC not only provides benefits in the spacecraft interface but is also predicted to outperform the SEC. It was proposed that if AMTEC were selected, funding should be provided at a reasonable level to support back-up technology to be developed in a parallel fashion until AMTEC has proven its capability. The panel report and conclusion were provided to DOE in February 1997

  13. Technology readiness level (TRL) assessment of cladding alloys for advanced nuclear fuels

    International Nuclear Information System (INIS)

    Shepherd, Daniel

    2015-01-01

    Reliable fuel claddings are essential for the safe, sustainable and economic operation of nuclear stations. This paper presents a worldwide TRL assessment of advanced claddings for Gen III and IV reactors following an extensive literature review. Claddings include austenitic, ferritic/martensitic (F/M), reduced activation (RA) and oxide dispersion strengthened (ODS) steels as well as advanced iron-based alloys (Kanthal alloys). Also assessed are alloys of zirconium, nickel (including Hastelloy R ), titanium, chromium, vanadium and refractory metals (Nb, Mo, Ta and W). Comparison is made with Cf/C and SiCf/SiC composites, MAX phase ceramics, cermets and TRISO fuel particle coatings. The results show in general that the higher the maximum operating temperature of the cladding, the lower the TRL. Advanced claddings were found to have lower TRLs than the corresponding fuel materials, and therefore may be the limiting factor in the deployment of advanced fuels and even possibly the entire reactor in the case of Gen IV. (authors)

  14. Readiness Assessment Plan, Hanford 200 areas treated effluent disposal facilities

    International Nuclear Information System (INIS)

    Ulmer, F.J.

    1995-01-01

    This Readiness Assessment Plan documents Liquid Effluent Facilities review process used to establish the scope of review, documentation requirements, performance assessment, and plant readiness to begin operation of the Treated Effluent Disposal system in accordance with DOE-RLID-5480.31, Startup and Restart of Facilities Operational Readiness Review and Readiness Assessments

  15. Science & Technology Review July/August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for the months of July and August 2016, there are two features: one on Science and Technology in Support of Nuclear Nonproliferation, and another on Seeking Out Hidden Radioactive Materials. Then there are highlights are three research projects--on optics, plasma science, and the nature of neutrinos--along with a news section and patents and awards.

  16. Science & Technology Review July/August 2016

    International Nuclear Information System (INIS)

    Vogt, Ramona L.; Meissner, Caryn N.; Chinn, Ken B.

    2016-01-01

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation's security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory's scientific and technological accomplishments in fulfilling its primary missions. The publication's goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for the months of July and August 2016, there are two features: one on Science and Technology in Support of Nuclear Nonproliferation, and another on Seeking Out Hidden Radioactive Materials. Then there are highlights are three research projects--on optics, plasma science, and the nature of neutrinos--along with a news section and patents and awards.

  17. Review of Current Nuclear Vacuum System Technologies

    International Nuclear Information System (INIS)

    Carroll, M.; McCracken, J.; Shope, T.

    2003-01-01

    Nearly all industrial operations generate unwanted dust, particulate matter, and/or liquid wastes. Waste dust and particulates can be readily tracked to other work locations, and airborne particulates can be spread through ventilation systems to all locations within a building, and even vented outside the building - a serious concern for processes involving hazardous, radioactive, or nuclear materials. Several varieties of vacuum systems have been proposed and/or are commercially available for clean up of both solid and liquid hazardous and nuclear materials. A review of current technologies highlights both the advantages and disadvantages of the various systems, and demonstrates the need for a system designed to address issues specific to hazardous and nuclear material cleanup. A review of previous and current hazardous/nuclear material cleanup technologies is presented. From simple conventional vacuums modified for use in industrial operations, to systems specifically engineered for such purposes, the advantages and disadvantages are examined in light of the following criteria: minimal worker exposure; minimal secondary waste generation;reduced equipment maintenance and consumable parts; simplicity of design, yet fully compatible with all waste types; and ease of use. The work effort reviews past, existing and proposed technologies in light of such considerations. Accomplishments of selected systems are presented, including identified areas where technological improvements could be suggested

  18. Mobile Technologies & Academics: Do Students Use Mobile Technologies in Their Academic Lives and are Librarians Ready to Meet this Challenge?

    Directory of Open Access Journals (Sweden)

    Angela Dresselhaus

    2012-06-01

    Full Text Available In this paper we report on two surveys and offer an introductory plan that librarians may use to begin implementing mobile access to selected library databases and services. Results from the first survey helped us to gain insight into where students at Utah State University (USU in Logan, Utah, stand regarding their use of mobile devices for academic activities in general and their desire for access to library services and resources in particular. A second survey, conducted with librarians, gave us an idea of the extent to which responding libraries offer mobile access, their future plans for mobile implementation, and their opinions about whether and how mobile technologies may be useful to library patrons. In the last segment of the paper, we outline steps librarians can take as they “go mobile.”

  19. Current biodiesel production technologies: A comparative review

    International Nuclear Information System (INIS)

    Abbaszaadeh, Ahmad; Ghobadian, Barat; Omidkhah, Mohammad Reza; Najafi, Gholamhassan

    2012-01-01

    Highlights: ► In this paper we review the technologies related to biodiesel production. ► 4 Primary approaches reviewed are direct use and blending of oils, micro-emulsions, pyrolysis and transesterification method. ► Both advantages and disadvantages of the different biodiesel production methods are also discussed. ► The most common technology of biodiesel production is transesterification of oils. ► Selection of a transesterification method depends on the amount of FFA and water content of the feedstock. - Abstract: Despite the high energy demand in the industrialized world and the pollution problems caused by widespread use of fossil fuels, the need for developing renewable energy sources with less environmental impacts are increasing. Biodiesel production is undergoing rapid and extensive technological reforms in industries and academia. The major obstacle in production and biodiesel commercialization path is production cost. Thus, in previous years numerous studies on the use of technologies and different methods to evaluate optimal conditions of biodiesel production technically and economically have been carried out. In this paper, a comparative review of the current technological methods so far used to produce biodiesel has been investigated. Four primary approaches to make biodiesel are direct use and blending of vegetable oils, micro-emulsions, thermal cracking (pyrolysis) and transesterification. Transesterification reaction, the most common method in the production of biodiesel, is emphasized in this review. The two types of transestrification process; catalytic and non-catalytic are discussed at length in the paper. Both advantages and disadvantages of the different biodiesel production methods are also discussed.

  20. Review of emerging surgical robotic technology.

    Science.gov (United States)

    Peters, Brian S; Armijo, Priscila R; Krause, Crystal; Choudhury, Songita A; Oleynikov, Dmitry

    2018-04-01

    The use of laparoscopic and robotic procedures has increased in general surgery. Minimally invasive robotic surgery has made tremendous progress in a relatively short period of time, realizing improvements for both the patient and surgeon. This has led to an increase in the use and development of robotic devices and platforms for general surgery. The purpose of this review is to explore current and emerging surgical robotic technologies in a growing and dynamic environment of research and development. This review explores medical and surgical robotic endoscopic surgery and peripheral technologies currently available or in development. The devices discussed here are specific to general surgery, including laparoscopy, colonoscopy, esophagogastroduodenoscopy, and thoracoscopy. Benefits and limitations of each technology were identified and applicable future directions were described. A number of FDA-approved devices and platforms for robotic surgery were reviewed, including the da Vinci Surgical System, Sensei X Robotic Catheter System, FreeHand 1.2, invendoscopy E200 system, Flex® Robotic System, Senhance, ARES, the Single-Port Instrument Delivery Extended Research (SPIDER), and the NeoGuide Colonoscope. Additionally, platforms were reviewed which have not yet obtained FDA approval including MiroSurge, ViaCath System, SPORT™ Surgical System, SurgiBot, Versius Robotic System, Master and Slave Transluminal Endoscopic Robot, Verb Surgical, Miniature In Vivo Robot, and the Einstein Surgical Robot. The use and demand for robotic medical and surgical platforms is increasing and new technologies are continually being developed. New technologies are increasingly implemented to improve on the capabilities of previously established systems. Future studies are needed to further evaluate the strengths and weaknesses of each robotic surgical device and platform in the operating suite.

  1. A Literature Review of Spreadsheet Technology

    DEFF Research Database (Denmark)

    Bock, Alexander

    2016-01-01

    It was estimated that there would be over 55 million end-user programmers in 2012 in many different fields such as engineering,insurance and banking, and the numbers are not expected to have dwindled since. Consequently, technological advancements of spreadsheets is of great interest to a wide...... number of people from different backgrounds. This literature review presents an overview of research on spreadsheet technology, its challenges and its solutions. We also attempt to identify why software developers generally frown upon spreadsheets and how spreadsheet research can help alter this view....

  2. Whole dietary patterns to optimize cognitive function for military mission-readiness: a systematic review and recommendations for the field.

    Science.gov (United States)

    Teo, Lynn; Crawford, Cindy; Yehuda, Rachel; Jaghab, Danny; Bingham, John J; Gallon, Matthew D; O'Connell, Meghan L; Chittum, Holly K; Arzola, Sonya M; Berry, Kevin

    2017-06-01

    Optimizing cognitive performance, particularly during times of high stress, is a prerequisite to mission-readiness among military personnel. It has been of interest to determine whether such performance could be enhanced through diet. This systematic review assesses the quality of the evidence for whole dietary patterns across various outcomes related to cognitive function in healthy adult populations to develop research recommendations for the military. PubMed, CINAHL, Embase, PsycInfo, and the Cochrane Library were searched. Peer-reviewed randomized controlled trials published in the English language were eligible. Fifteen included trials were assessed for methodological quality, and descriptive data were extracted. Of the 6 acceptable-quality studies, 1 demonstrated statistically nonsignificant results, whereas the other 5 showed conflicting results across the cognitive outcomes assessed. Due to the heterogeneity across the included studies, no recommendations could be reached concerning whether certain whole dietary patterns have an effect on cognitive outcomes in healthy populations. Specific recommendations for future research are offered. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  3. Phytochemicals to optimize cognitive function for military mission-readiness: a systematic review and recommendations for the field.

    Science.gov (United States)

    Teo, Lynn; Crawford, Cindy; Snow, James; Deuster, Patricia A; Bingham, John J; Gallon, Matthew D; O'Connell, Meghan L; Chittum, Holly K; Arzola, Sonya M; Berry, Kevin

    2017-06-01

    Optimizing cognitive performance and preventing cognitive impairments that result from exposure to high-stress situations are important to ensure mission-readiness for military personnel. This systematic review assesses the quality of the evidence for plant-based foods and beverages, or their phytochemical constituents, across various outcomes related to cognitive function in healthy adult populations to develop research recommendations for the military. PubMed, CINAHL, Embase, PsycInfo, and the Cochrane Library were searched. Peer-reviewed randomized controlled trials published in the English language were eligible. Twenty-five trials were included and assessed for methodological quality, and descriptive data were extracted. The acceptable (n = 16) to high-quality (n = 4) studies produced either no statistically significant effect or mixed results for enhancing cognitive function. The evidence suggested that healthy populations do not experience significant changes in cognitive performance when consuming soy- and non-soy-sourced isoflavones or cocoa. Heterogeneity among other interventions precluded reaching formal conclusions surrounding the evidence. Research recommendations are offered, including conducting more studies on the effect of plant-based interventions on populations reflective of military populations when exposed to military-like situations. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  4. Emerging Technologies Landscape on Education. A review

    Directory of Open Access Journals (Sweden)

    Luis de la Fuente Valentin

    2013-09-01

    Full Text Available This paper presents a desk research that analysed available recent studies in the field of Technology Enhanced Learning. The desk research is focused on work produced in the frame of FP6 and FP7 European programs, in the area of Information and Communication Technologies. It concentrates in technologies that support existing forms of learning, and also in technologies that enhance new learning paradigms. This approach includes already adopted and successfully piloted technologies. The elaboration of the desk research had three main parts: firstly, the collection of documents from CORDIS and other institutions related to TEL research; secondly, the identification of relevant terms appearing in those documents and the elaboration of a thesaurus; and thirdly, a quantitative analysis of each term occurrences. Many of the identified technologies belong to the fields of interactive multimedia, Human-computer Interaction and-or related to recommendation and learning analytics. This study becomes a thorough review of the current state of these fields through the actual development of R&D European projects. This research, will be used as a basis to better understand the evolution of the sector, and to focus future research efforts on these sectors and their application to education.

  5. Review: Security in Wireless Technologies in Business

    Science.gov (United States)

    Sattarova, F. Y.; Kim, Tai-Hoon

    Wireless technology seems to be everywhere now - but it is still relatively in its infancy. New standards and protocols continue to emerge and problems and bugs are discovered. Nevertheless, wireless networks make many things much more convenient and it appears that wireless networks are here to stay. The differences and similarities of wireless and wired security, the new threats brought by mobility, the security of networks and devices and effects of security, or lack of it are shortly discussed in this review paper.

  6. Science and Technology Review, August 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Stull, S.; Wheatcraft, D. [eds.

    1996-08-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. Topics discussed in this August 1996 issue are: Keeping the nuclear stockpile safe, secure, and reliable; Molten salt takes the bang out of high explosives; Security clearances meet the electronic age; and Exploring oil fields with crosshole electromagnetic induction.

  7. Medical imaging technology reviews and computational applications

    CERN Document Server

    Dewi, Dyah

    2015-01-01

    This book presents the latest research findings and reviews in the field of medical imaging technology, covering ultrasound diagnostics approaches for detecting osteoarthritis, breast carcinoma and cardiovascular conditions, image guided biopsy and segmentation techniques for detecting lung cancer, image fusion, and simulating fluid flows for cardiovascular applications. It offers a useful guide for students, lecturers and professional researchers in the fields of biomedical engineering and image processing.

  8. 2012 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  9. [Physical and chemical stability of fortified ophtalmic ready-to-use solutions: review of literature].

    Science.gov (United States)

    Sourdeau, P; Evrard, J-M; Remy, G; Hecq, J-D

    2012-03-01

    Ophtalmic infections and inflammations are often encountered during hospitalization. They require the preparation of "fortified" ophtalmic solutions, i.e. pharmaceutical ophtalmic solutions which are hyperconcentrated in active substance. The data of physicochemical stabilities are modified and it is therefore essential to gather the results of the various publications devoted to this subject. In 2006, an initial literature review was undertaken to identify the molecules mostly used in the preparation of fortified ophtalmic solutions in hospital. A second review of the literature in 2010 has enriched the knowledge about it. Two new drugs have entered the summary table: amikacin and ticarcillin disodium. Date on 12 molecules already known in 2006 were updated to improve clinical practices. A review of the literature was undertaken in order to collect the results of the molecules mostly used for the preparation of the fortified ophtalmic solutions in hospitals. A summary table, indicating the active substance, its concentration, the assay method, the storage temperature and physicochemical modifications, presents all the results. This review of literature makes it possible to match stability and validity period to these preparations. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

  10. Preservation technologies for fresh meat - a review.

    Science.gov (United States)

    Zhou, G H; Xu, X L; Liu, Y

    2010-09-01

    Fresh meat is a highly perishable product due to its biological composition. Many interrelated factors influence the shelf life and freshness of meat such as holding temperature, atmospheric oxygen (O(2)), endogenous enzymes, moisture, light and most importantly, micro-organisms. With the increased demand for high quality, convenience, safety, fresh appearance and an extended shelf life in fresh meat products, alternative non-thermal preservation technologies such as high hydrostatic pressure, superchilling, natural biopreservatives and active packaging have been proposed and investigated. Whilst some of these technologies are efficient at inactivating the micro-organisms most commonly related to food-borne diseases, they are not effective against spores. To increase their efficacy against vegetative cells, a combination of several preservation technologies under the so-called hurdle concept has also been investigated. The objective of this review is to describe current methods and developing technologies for preserving fresh meat. The benefits of some new technologies and their industrial limitations is presented and discussed.

  11. Cesium and Strontium Separation Technologies Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    T. A. Todd; T. A. Todd; J. D. Law; R. S. Herbst

    2004-03-01

    Integral to the Advanced Fuel Cycle Initiative (AFCI) Program’s proposed closed nuclear fuel cycle, the fission products cesium and strontium in the dissolved spent nuclear fuel stream are to be separated and managed separately. A comprehensive literature survey is presented to identify cesium and strontium separation technologies that have the highest potential and to focus research and development efforts on these technologies. Removal of these high-heat-emitting fission products reduces the radiation fields in subsequent fuel cycle reprocessing streams and provides a significant short-term (100 yr) heat source reduction in the repository. This, along with separation of actinides, may provide a substantial future improvement in the amount of fuel that could be stored in a geologic repository. The survey and review of the candidate cesium and strontium separation technologies are presented herein. Because the AFCI program intends to manage cesium and strontium together, technologies that simultaneously separate both elements are of the greatest interest, relative to technologies that separate only one of the two elements.

  12. The tokamak fusion test reactor tritium systems test contractor operational readiness review

    International Nuclear Information System (INIS)

    Gentile, C.A.; Levine, J.; Norris, M.; Rehill, F.; Such, C.

    1993-01-01

    In preparation for D-T operations at TFTR, the TFTR project has successfully completed the C-ORR process which has led to the introduction of 200 curies of tritium to the site. Preparations for the C-ORR began approximately 2 years ago. During July 1992 a one-week Site Assistance Review was conducted by the C-ORR , and C-ORR Team consisting of 12 persons, all of whom were outside experts, many of whom were from other facilities within the DOE complex. During the July 1992 Site Assistance Review 201 findings were documented which fell into one of three categories. All of the 109 category one findings which were generated were required to be resolved prior to the introduction of tritium to the TFTR site. On April 5, 1993, the TFTR Tritium System Test C-ORR commenced. The results of the C-ORR as documented in the final report by the C-ORR was that category 1 findings were resolved, and it was the recommendation of the C-ORR Team to the PPPL ES ampersand H Board that TFTR initiate the Tritium Systems Test. DOE (Chicago Operations, Princeton Area Office) concurred with the C-ORR final report and on April 29, 1993, at 12:15 pm tritium was introduced to the TFTR site

  13. Science and Technology Review, September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Upadhye, R.; Wheatcraft, D. [eds.

    1996-09-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments in fulfilling its primary missions. The feature articles are `Taking Lasers beyond the National Ignition Facility` and `Jumpin` Jupiter! Metallic Hydrogen`. The first article describes the ultimate goal of laser fusion as the production of electricity by inertial confinement fusion. Advances in diode-laser technology promise to take another step closer to that goal. The latter article discusses a Laboratory team`s efforts to provide evidence for the metallization of hydrogen based on the team`s expertise in shock compression. A commentary on `The Next Frontiers of Advanced Lasers Research is provided, and a research highlight is given on `Modeling Human Joints and Prosthetic Implants.

  14. Tissue Microarray TechnologyA Brief Review

    Directory of Open Access Journals (Sweden)

    Ramya S Vokuda

    2018-01-01

    Full Text Available In this era of modern revolutionisation in the field of medical laboratory technology, everyone is aiming at taking the innovations from laboratory to bed side. One such technique that is most relevant to the pathologic community is Tissue Microarray (TMA technology. This is becoming quite popular amongst all the members of this family, right from laboratory scientists to clinicians and residents to technologists. The reason for this technique to gain popularity is attributed to its cost effectiveness and time saving protocols. Though, every technique is accompanied by disadvantages, the benefits out number them. This technique is very versatile as many downstream molecular assays such as immunohistochemistry, cytogenetic studies, Fluorescent In situ-Hybridisation (FISH etc., can be carried out on a single slide with multiple numbers of samples. It is a very practical approach that aids effectively to identify novel biomarkers in cancer diagnostics and therapeutics. It helps in assessing the molecular markers on a large scale very quickly. Also, the quality assurance protocols in pathological laboratory has exploited TMA to a great extent. However, the application of TMA technology is beyond oncology. This review shall focus on the different aspects of this technology such as construction of TMA, instrumentation, types, advantages and disadvantages and utilisation of the technique in various disease conditions.

  15. Technology - a review of current status

    International Nuclear Information System (INIS)

    Wolf, R.

    1986-01-01

    The book reviews the history of the efforts taken by the political and administrative authorities to acquire the technical knowledge required to fulfill their functions as competent authorities to evaluate and decide on technical feasibility and economic justification of complex technical processes, a task which constantly puts strain on the authorities, who have to keep up with the technological know-how of the industrial and technological establishments who, as it where, stand opposite to the authorities in the process of legal regulation of technological risks. The author explains the problems involved in the attempt to use existing, or establish adequate new, legal provisions to reconcile the interests of the law with those of the economy. The leading example for this purpose is the air pollution control laws. Further aspects discussed are steps taken from a technicalization of the law towards a proceduralization, and attempts towards a control of technology in a democratic constitutional state. The chapter on the 'risk to be tolerated' in the law on licensing of nuclear installations has been separately analysed and abstracted for the database. (HSCH) [de

  16. Readiness of Sub-Saharan Africa Healthcare Systems for the New Pandemic, Diabetes: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Bernardo Nuche-Berenguer

    2018-01-01

    Full Text Available Background. Effective health systems are needed to care for the coming surge of diabetics in sub-Saharan Africa (SSA. Objective. We conducted a systematic review of literature to determine the capacity of SSA health systems to manage diabetes. Methodology. We used three different databases (Embase, Scopus, and PubMed to search for studies, published from 2004 to 2017, on diabetes care in SSA. Results. Fifty-five articles met the inclusion criteria, covering the different aspects related to diabetes care such as availability of drugs and diagnostic tools, the capacity of healthcare workers, and the integration of diabetes care into HIV and TB platforms. Conclusion. Although chronic care health systems in SSA have developed significantly in the last decade, the capacity for managing diabetes remains in its infancy. We identified pilot projects to enhance these capacities. The scale-up of these pilot interventions and the integration of diabetes care into existing robust chronic disease platforms may be a feasible approach to begin to tackle the upcoming pandemic in diabetes. Nonetheless, much more work needs to be done to address the health system-wide deficiencies in diabetes care. More research is also needed to determine how to integrate diabetes care into the healthcare system in SSA.

  17. e-Learning readiness amongst nursing students at the Durban ...

    African Journals Online (AJOL)

    e-Learning readiness amongst nursing students at the Durban University of ... make the shift from traditional learning to the technological culture of e-Learning at a ... equipment and technological readiness for the change in learning method.

  18. [Theoretical and methodological bases for formation of future drivers 'readiness to application of physical-rehabilitation technologies].

    Science.gov (United States)

    Yemets, Anatoliy V; Donchenko, Viktoriya I; Scrinick, Eugenia O

    2018-01-01

    Introduction: Experimental work is aimed at introducing theoretical and methodological foundations for the professional training of the future doctor. The aim: Identify the dynamics of quantitative and qualitative indicators of the readiness of a specialist in medicine. Materials and methods: The article presents the course and results of the experimental work of the conditions of forming the readiness of future specialists in medicine. Results: Our methodical bases for studying the disciplines of the general practice and specialized professional stage of experimental training of future physicians have been worked out. Conclusions: It is developed taking into account the peculiarities of future physician training of materials for various stages of experimental implementation in the educational process of higher medical educational institutions.

  19. A review of treatment technologies for MTBE

    International Nuclear Information System (INIS)

    Bass, D.

    1995-01-01

    Available treatment technologies for methyl tertiary butyl ether (MTBE) contamination in soil, groundwater, and recovered groundwater are reviewed and assessed. MTBE contamination is becoming an important issue due to the increasing prevalence and regulation of this gasoline additive. In addition, MTBE is more soluble and more mobile in groundwater than most hydrocarbons, so it is usually the first gasoline constituent to reach sensitive receptors. Treatment of MTBE is complicated by its Henry's constant, which is lower than most other gasoline constituents. Furthermore, evidence of biodegradability of MTBE is mixed, and MTBE does not degrade rapidly abiotically. Groundwater pumping is usually employed to contain and collect MTBE-contaminated groundwater, often successfully because of its high aqueous solubility. Air sparging/soil vapor extraction is also successfully employed to treat MTBE, but its effectiveness is reduced by the low Henry's constant of MTBE. Sparging and other aerobic bioremediation approaches are hampered by the poor biodegradability of MTBE. Oxidation technologies, such as ozone injection, hold promise for rapid in situ remediation of MTBE. Treatment of recovered groundwater contaminated with MTBE is also problematic. MTBE adsorbs poorly to granular activated carbon; advanced oxidation processes are effective on MTBE, but entail high capital and operating costs; bioreactors are of questionable effectiveness on MTBE. Air stripping is usually the most cost-effective treatment technology for MTBE so long as the off gas from the air stripper can be discharged without treatment. However, off gas treatment is expensive, so groundwater is sometimes heated to reduce the requirement for stripping air

  20. Science & Technology Review October/November 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-11

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. The Laboratory is operated by Lawrence Livermore National Security, LLC (LLNS), for the Department of Energy’s National Nuclear Security Administration. LLNS is a partnership involving Bechtel National, University of California, Babcock & Wilcox, Washington Division of URS Corporation, and Battelle in affiliation with Texas A&M University. More information about LLNS is available online at www.llnsllc.com. Please address any correspondence (including name and address changes) to S&TR, Mail Stop L-664, Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551, or telephone (925) 423-3893. Our e-mail address is str-mail@llnl.gov. S&TR is available on the Web at str.llnl.gov.

  1. A review on technology maturity of small scale energy storage technologies★

    Directory of Open Access Journals (Sweden)

    Nguyen Thu-Trang

    2017-01-01

    Full Text Available This paper reviews the current status of energy storage technologies which have the higher potential to be applied in small scale energy systems. Small scale energy systems can be categorized as ones that are able to supply energy in various forms for a building, or a small area, or a limited community, or an enterprise; typically, they are end-user systems. Energy storage technologies are classified based on their form of energy stored. A two-step evaluation is proposed for selecting suitable storage technologies for small scale energy systems, including identifying possible technical options, and addressing techno-economic aspects. Firstly, a review on energy storage technologies at small scale level is carried out. Secondly, an assessment of technology readiness level (TRL is conducted. The TRLs are ranked according to information gathered from literature review. Levels of market maturity of the technologies are addressed by taking into account their market development stages through reviewing published materials. The TRLs and the levels of market maturity are then combined into a technology maturity curve. Additionally, market driving factors are identified by using different stages in product life cycle. The results indicate that lead-acid, micro pumped hydro storage, NaS battery, NiCd battery, flywheel, NaNiCl battery, Li-ion battery, and sensible thermal storage are the most mature technologies for small scale energy systems. In the near future, hydrogen fuel cells, thermal storages using phase change materials and thermochemical materials are expected to become more popular in the energy storage market.

  2. Operational readiness review for the TSCA incinerator start-up at the Oak Ridge K-25 site

    International Nuclear Information System (INIS)

    Jordan, Elizabeth A.; Murray, Alexander P.; Kiang, Peter M.

    1992-01-01

    The Department of Energy (DOE) Toxic Substances Control Act (TSCA) incinerator at Oak Ridge K-25 Site was designed in the early 1980's as a treatment alternative for the increasing quantities of radioactive mixed waste accumulating from gaseous diffusion plant (GDP) operations. The waste feed principally contains low assay uranium and PCBs, although listed solvents and heavy metal containing sludges have also be incinerated. Construction was completed in 1986 and the unit underwent an extensive series of tests and trial burns, because of the following unique characteristics: the incinerator treats radioactive mixed wastes; increased size of the incinerator for greater waste throughout and treatment capacity; expansion of the waste acceptance criteria to include materials and radionuclides from non-GDP operations, such as ORNL and Y-12; modifications and improvement to the Air Pollution Control (APC) system; treatment of large quantities and concentrations of PCB containing materials; projected longevity of operation (40 years); humid, Eastern location with a high, annual precipitation. The incinerator was initially fired in July, 1986. The full performance testing (with the APC) and DOE acceptance of the facility occurred a year later. The trial burn period lasted from 1988 through 1990. Numerous equipment problems were initially encountered, including excessive draft fan wear and failure. These problems have been overcome, the facility is fully permitted, DOE provided authorization for full operations in 1991, and, to date, over two million pounds of mixed waste have been incinerated, with an average volume reduction factor of approximately nine. This paper discusses the Office of Environmental Restoration and Waste Management Readiness Review for the incinerator. (author)

  3. Capture ready study

    Energy Technology Data Exchange (ETDEWEB)

    Minchener, A.

    2007-07-15

    There are a large number of ways in which the capture of carbon as carbon dioxide (CO{sub 2}) can be integrated into fossil fuel power stations, most being applicable for both gas and coal feedstocks. To add to the choice of technology is the question of whether an existing plant should be retrofitted for capture, or whether it is more attractive to build totally new. This miscellany of choices adds considerably to the commercial risk of investing in a large power station. An intermediate stage between the non-capture and full capture state would be advantageous in helping to determine the best way forward and hence reduce those risks. In recent years the term 'carbon capture ready' or 'capture ready' has been coined to describe such an intermediate stage plant and is now widely used. However a detailed and all-encompassing definition of this term has never been published. All fossil fuel consuming plant produce a carbon dioxide gas byproduct. There is a possibility of scrubbing it with an appropriate CO{sub 2} solvent. Hence it could be said that all fossil fuel plant is in a condition for removal of its CO{sub 2} effluent and therefore already in a 'capture ready' state. Evidently, the practical reality of solvent scrubbing could cost more than the rewards offered by such as the ETS (European Trading Scheme). In which case, it can be said that although the possibility exists of capturing CO{sub 2}, it is not a commercially viable option and therefore the plant could not be described as ready for CO{sub 2} capture. The boundary between a capture ready and a non-capture ready condition using this definition cannot be determined in an objective and therefore universally acceptable way and criteria must be found which are less onerous and less potentially contentious to assess. 16 refs., 2 annexes.

  4. A review of magnetic heat pump technology

    International Nuclear Information System (INIS)

    Barclay, J.A.

    1990-01-01

    The area of technology classified as heat pumps generally refers to refrigerators, heat pumps and heat engines. This review is restricted to the literature on magnetic refrigerators and magnetic heat pumps which are referred to interchangeably. Significant progress has been made on the development of engineering prototypes of cryogenic, nonregenerative magnetic refrigerators utilizing conductive heat transfer in the 0.1 K to 20 K temperature range. Advances have also been made in analysis of regenerative magnetic refrigerators and heat pumps utilizing the active magnetic regeneration (AMR) concept. Units based on AMR are being modeled, designed and/or built to operate in various temperature ranges including 1.8-4.5 K, 4-15 K, 15-85 K, and 270-320 K. The near room temperature units have been scaled to 50 kW as both refrigerators and heat pumps. The progress of magnetic refrigeration over the last three years is summarized and discussed

  5. Review of major plutonium pyrochemical technology

    International Nuclear Information System (INIS)

    Moser, W.S.; Navratil, J.D.

    1983-01-01

    The past twenty years have seen significant growth in the development and application of pyrochemical technology for processing of plutonium. For particular feedstocks and specific applications, non-aqueous high-temperature processes offer key advantages over conventional hydrometallurgical systems. Major processes in use today include: (1) direct oxide reduction for conversion of PuO 2 to metal, (2) molten salt extraction for americium removal from plutonium, (3) molten salt electrorefining for Pu purification, and (4) hydriding to remove plutonium from host substrates. This paper reviews current major pyrochemical processes from the classical calcination-hydrofluorination-bomb reduction sequence through new techniques under development. Each process is presented and brief descriptions of production equipment are given. 47 references, 5 figures

  6. Review of ORNL's MSR technology and status

    International Nuclear Information System (INIS)

    Toth, L.M.; Gat, U.; Del Cul, G.D.; Dai, S.; Williams, D.F.

    1996-01-01

    The current status of molten salt reactor development is discussed with reference to the experience from the Oak Ridge Molten Salt Reactor Experiment. Assessment of the future for this reactor system is reviewed with consideration of both advantages and disadvantages. Application of this concept to ADTT (accelerator driven transmutation technology) needs appears to be feasible by drawing on the MSRE experience. Key chemical considerations remain as: solubility, redox behavior, and chemical activity and their importance to ADTT planning is briefly explained. Priorities in the future development of molten salts for these applications are listed, with the foremost being the acceptance of the 2LiF-BeF 2 solvent system. 8 refs, 2 figs

  7. Biosensor technology for pesticides--a review.

    Science.gov (United States)

    Verma, Neelam; Bhardwaj, Atul

    2015-03-01

    Pesticides, due to their lucrative outcomes, are majorly implicated in agricultural fields for crop production enhancement. Due to their pest removal properties, pesticides of various classes have been designed to persist in the environment over a longer duration after their application to achieve maximum effectiveness. Apart from their recalcitrant structure and agricultural benefits, pesticides also impose acute toxicological effects onto the other various life forms. Their accumulation in the living system may prove to be detrimental if established in higher concentrations. Thus, their prompt and accurate analysis is a crucial matter of concern. Conventional techniques like chromatographic techniques (HPLC, GC, etc.) used for pesticides detection are associated with various limitations like stumpy sensitivity and efficiency, time consumption, laboriousity, requirement of expensive equipments and highly trained technicians, and many more. So there is a need to recruit the methods which can detect these neurotoxic compounds sensitively, selectively, rapidly, and easily in the field. Present work is a brief review of the pesticide effects, their current usage scenario, permissible limits in various food stuffs and 21st century advancements of biosensor technology for pesticide detection. Due to their exceptional performance capabilities, easiness in operation and on-site working, numerous biosensors have been developed for bio-monitoring of various environmental samples for pesticide evaluation immensely throughout the globe. Till date, based on sensing element (enzyme based, antibody based, etc.) and type of detection method used (Electrochemical, optical, and piezoelectric, etc.), a number of biosensors have been developed for pesticide detection. In present communication, authors have summarized 21st century's approaches of biosensor technology for pesticide detection such as enzyme-based biosensors, immunosensors, aptamers, molecularly imprinted polymers, and

  8. Reviews on Solid Oxide Fuel Cell Technology

    Directory of Open Access Journals (Sweden)

    Apinan Soottitantawat

    2009-02-01

    Full Text Available Solid Oxide Fuel Cell (SOFC is one type of high temperature fuel cell that appears to be one of the most promising technology to provide the efficient and clean energy production for wide range of applications (from small units to large scale power plants. This paper reviews the current status and related researches on SOFC technologies. In details, the research trend for the development of SOFC components(i.e. anode, electrolyte, cathode, and interconnect are presented. Later, the current important designs of SOFC (i.e. Seal-less Tubular Design, Segmented Cell in Series Design, Monolithic Design and Flat Plate Design are exampled. In addition, the possible operations of SOFC (i.e. external reforming, indirect internal reforming, and direct internal reforming are discussed. Lastly, the research studies on applications of SOFCs with co-generation (i.e. SOFC with Combined Heat and Power (SOFC-CHP, SOFC with Gas Turbine (SOFC-GT and SOFC with chemical production are given.

  9. Review of fill mining technology in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Singh, K. H.; Hedley, D. G.F.

    1980-05-15

    The Canadian mining industry has a long history of being in the fore-front in developing new technology in underground hardrock mines. Examples include the development of hydraulic and cemented fills, undercut-and-fill, mechanized cut-and-fill, post pillar, vertical retreat and blasthole mining methods. The evolution of this technology is briefly described in an historical review. Backfill serves many functions, although it is generally considered in terms of its support capabilities. These functions, mainly related to the mining method used, are evaluated in regard to regional support, pillar support, fill roof, working floor, dilution control and waste disposal. With the advent of blasthole and vertical retreat methods for pillar recovery operations, the freestanding height of backfill walls has assumed greater importance. Consequently, more attention is being given to what fill properties are required to achieve fill wall exposures up to 25 m wide by 90 m high. With the large increases in energy costs, alternatives to partially replace Portland cement in fill are being examined. The validation of mining concepts and the interaction of backfill is perhaps best evaluated by in-situ measurements. Examples are given of stress, deformation and fill pressure measurements in longitudinal cut-and-fill, post pillar mining and blasthole stoping with delayed fill which were taken in several mines in Canada. Finally, the overall design procedure used in deciding mining method, stope and pillar dimensions, sequence of extraction, fill properties and support systems at a new mine is described.

  10. Analytical review of modern information education technologies

    OpenAIRE

    Светлана Викторовна Зенкина; О П Панкратова

    2014-01-01

    This article discusses and analyzes the modern information education technologies, which are seen as the priority to use in the modern information educational environment (Internet-based educational technologies, distance education, media education, e-Learning technologies, smart-education technologies).

  11. 2013 Building Technologies Office Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-11-01

    The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

  12. Deviation Among Technology Reviews: An Informative Enrichment of Technology Evolution Theory for Marketing

    OpenAIRE

    Sood, Ashish; Stremersch, Stefan

    2010-01-01

    textabstractUnderstanding technological change is of critical importance to marketers, as it bears new markets, new brands, new customers, and new market leaders. This paper examines the deviation among reviews of a technology’s performance and its consequences for inferences on technology evolution patterns. The basic premise of the current paper is that technology evolution literature, while highly relevant, is misguided in that it ignores potential deviation among technology reviews. Using...

  13. Energy & technology review, November--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Quirk, W.J.; Canada, J.; de Vore, L.; Gleason, K.; Kirvel, R.D.; Kroopnick, H.; McElroy, L. [eds.

    1993-11-01

    For the 40-plus years of the Cold War, both the United States and the Soviet Union built up nuclear stockpiles of tens of thousands of weapons. Now, as the Cold War has ended and tensions between the superpowers have subsided, the US faces the task of significantly reducing its nuclear arsenal. Many thousands of nuclear weapons are being removed from the stockpile as a result of recent treaties and unilateral decisions. This issue of Energy and Technology Review describes the Laboratory`s role in the nation`s effort to dismantle these weapons safely and rapidly. The dismantlement of the United States` nuclear weapons takes place at the Department of Energy`s Pantex facility near Amarillo, Texas. The first article in this issue summarizes the Laboratory`s involvement in dismantling Livermore-designed nuclear weapons. LLNL (like Los Alamos) has responsibility for the weapons it designed, from design concept to retirement. In the past, the responsibilities ended when the weapon was retired from the stockpile. Now however, the role has been extended to include dismantlement. The second article reports on an incident that occurred in November 1992, in which the pit of a W48 warhead cracked during dismantlement. The Laboratory was called upon to handle the pit safely and determine the causes of the cracking. The third article explores a variety of methods proposed for reusing the high explosives after they are removed from the weapon. In the past, Laboratory work on nuclear weapons focused primarily on design and development. However, as the size and composition of the US stockpile changes with evolving international conditions, they will be called upon with increasing frequency to provide the scientific and technical expertise needed to dismantle the nation`s retired nuclear weapons safely and efficiently.

  14. Science and Technology Review, June 1999

    International Nuclear Information System (INIS)

    Eimerl, D

    1999-01-01

    The following two abstracts are for the 2 feature stories in this issue of ''Science and Technology Review''. (1) ''Forewarnings of Coming Hazards''--The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore is an emergency response organization chartered to aid Department of Energy and Department of Defense sites when radioactive or toxic material is released into the atmosphere. Developed from studies beginning in the 1960s, it became a funded operational program in the late 1970s. Using an emergency response modeling system now in its third generation, ARAC scientists predict how atmospheric releases that could affect public health and safety will disperse. The ARAC system has evolved through experience gained during regular training exercises and in over 160 alerts and emergency responses to date. The work of ARAC scientists described in the article demonstrates the different modeling challenges they encounter in preparing for and responding to a variety of atmospheric emergencies. (2) ''Unraveling the Mystery of Detonation''--Laboratory experts in the detonation of high explosives are putting the computational power of the Accelerated Strategic Computing Initiative (ASCI) to the test. Their research centers on insensitive explosives, whose behavior during detonation is slower and more complex than that of sensitive explosives. The article features three research projects, which are exploring detonation from different angles: the initiation phase, the molecules produced during detonation, and further development of CHEETAH, a thermochemical detonation code. All research teams are using ASCI supercomputers, which have increased their ability to simulate the detonation process by a factor of 100,000

  15. Technologies for the Study of Speech: Review and an Application

    Science.gov (United States)

    Babatsouli, Elena

    2015-01-01

    Technologies used for the study of speech are classified here into non-intrusive and intrusive. The paper informs on current non-intrusive technologies that are used for linguistic investigations of the speech signal, both phonological and phonetic. Providing a point of reference, the review covers existing technological advances in language…

  16. Nuclear Technology Review 2013. Report by the Director General

    International Nuclear Information System (INIS)

    2013-01-01

    In response to requests by Member States, the Secretariat produces a comprehensive Nuclear Technology Review each year. Attached is this year's report, which highlights notable developments principally in 2012. The Nuclear Technology Review 2013 covers the following areas: power applications, atomic and nuclear data, accelerators and research reactors, and nuclear sciences and applications. Additional documentation associated with the Nuclear Technology Review 2013 is available on the Agency's website1 in English on nuclear hydrogen production technology and preliminary lessons learned from the Fukushima Daiichi accident for advanced nuclear power plant technology development. Information on the IAEA's activities related to nuclear science and technology can also be found in the IAEA's Annual Report 2012 (GC(57)/3), in particular the Technology section, and the Technical Cooperation Report for 2012 (GC(57)/INF/4). The document has been modified to take account, to the extent possible, of specific comments by the Board of Governors and other comments received from Member States. (author)

  17. Omega-3 polyunsaturated fatty acids to optimize cognitive function for military mission-readiness: a systematic review and recommendations for the field.

    Science.gov (United States)

    Teo, Lynn; Crawford, Cindy; Yehuda, Rachel; Jaghab, Danny; Bingham, John J; Chittum, Holly K; Gallon, Matthew D; O'Connell, Meghan L; Arzola, Sonya M; Berry, Kevin

    2017-06-01

    There has been interest in identifying whether nutrients might help optimize cognitive performance, especially for the military tasked with ensuring mission-readiness. This systematic review assesses the quality of the evidence for n-3 polyunsaturated fatty acids (PUFAs) across various outcomes related to cognitive function in healthy adult populations in order to develop research recommendations concerning n-3 PUFAs for mission-readiness. PubMed, CINAHL, Embase, PsycInfo, and the Cochrane Library were searched. Peer-reviewed randomized controlled trials published in the English language were eligible. Thirteen included trials were assessed for methodological quality, and descriptive data were extracted. Of the acceptable-quality (n = 8) and high-quality (n = 1) studies, 2 produced no statistically significant results, 5 produced mixed results, and 2 did not report between-group results. Results indicate that ingestion of n-3 PUFAs does not significantly alter cognitive performance in cognitively healthy persons. Studies exposing subjects to adverse circumstances that would be most relevant for drawing conclusions specifically for the military population are lacking. Several research recommendations are offered to enhance understanding of the role of fatty acids on cognitive functioning. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  18. 2015 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-11-01

    The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Arlington, Virginia. The review encompassed all of the work done by the FCTO and the VTO: 258 individual activities were reviewed for VTO, by 170 reviewers. A total of 1,095 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  19. 2014 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A total of 1,354 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  20. 2013 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-10-01

    The 2013 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held May 13-17, 2013, in Crystal City, Virginia. The review encompassed all of the work done by the FCTO and the VTO: a total of 287 individual activities were reviewed for VTO, by a total of 187 reviewers. A total of 1,382 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  1. Ultrasonication and food technology: A review

    OpenAIRE

    Ishrat Majid; Gulzar Ahmad Nayik; Vikas Nanda

    2015-01-01

    With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extractio...

  2. Smart storage technologies applied to fresh foods: A review.

    Science.gov (United States)

    Wang, Jingyu; Zhang, Min; Gao, Zhongxue; Adhikari, Benu

    2017-06-30

    Fresh foods are perishable, seasonal and regional in nature and their storage, transportation, and preservation of freshness are quite challenging. Smart storage technologies can online detection and monitor the changes of quality parameters and storage environment of fresh foods during storage, so that operators can make timely adjustments to reduce the loss. This article reviews the smart storage technologies from two aspects: online detection technologies and smartly monitoring technologies for fresh foods. Online detection technologies include electronic nose, nuclear magnetic resonance (NMR), near infrared spectroscopy (NIRS), hyperspectral imaging and computer vision. Smartly monitoring technologies mainly include some intelligent indicators for monitoring the change of storage environment. Smart storage technologies applied to fresh foods need to be highly efficient and nondestructive and need to be competitively priced. In this work, we have critically reviewed the principles, applications, and development trends of smart storage technologies.

  3. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  4. "iM Ready to Learn": Undergraduate Nursing Students Knowledge, Preferences, and Practice of Mobile Technology and Social Media.

    Science.gov (United States)

    Hay, Benjamin; Carr, Peter J; Dawe, Lydia; Clark-Burg, Karen

    2017-01-01

    The purpose of this study was to identify in what way social media and mobile technology assist with learning and education of the undergraduate nurse. The study involved undergraduate nursing students across three campuses from the University of Notre Dame Australia. Participants were invited to complete an online questionnaire that related to their current knowledge, preferences, and practice with mobile technology and social media within their undergraduate nursing degree. A quantitative descriptive survey design was adapted from an initial pilot survey by the authors. A total of 386 nursing students (23.47% of the total enrolment) completed the online survey. Overall, results suggested that students are more supportive of social media and mobile technology in principle than in practice. Students who frequently use mobile technologies prefer to print out, highlight, and annotate the lecture material. Findings suggest that nursing students currently use mobile technology and social media and are keen to engage in ongoing learning and collaboration using these resources. Therefore, nursing academia should encourage the appropriate use of mobile technology and social media within the undergraduate curriculum so that responsible use of such technologies positively affects the future nursing workforce.

  5. A review of the incidence and transmission of Listeria monocytogenes in ready-to-eat products in retail and food service environments.

    Science.gov (United States)

    Lianou, Alexandra; Sofos, John N

    2007-09-01

    Contamination of ready-to-eat products with Listeria monocytogenes may occur at several stages before consumption. Accessibility to the public and relatively limited control interventions at retail and food service establishments (compared with the processing sector of the food industry) and the lack of a specific regulatory framework increase the likelihood of introduction of this pathogen into some foods in these establishments. This review is a compilation of available information on the incidence and transmission of L. monocytogenes through ready-to-eat products at the retail and food service level. The potential transmission of L. monocytogenes within retail and food service operations has been indicated in epidemiological investigations and by survey data. Potential sources of the organism in these operations include the environment, food handlers, and incoming raw ingredients or processed products that have become contaminated after the lethality treatment at the manufacturing facility. L. monocytogenes may be present at retail and food service establishments in various ready-to-eat products, both prepackaged and those packaged in the store, and occasionally at high concentrations. This issue dictates the need for development and application of effective control measures, and potential control approaches are discussed here. Good manufacturing practices, appropriate cleaning, sanitation and hygiene programs, and temperature control required for prevention or inhibition of growth of the pathogen to high levels are critical for control of L. monocytogenes in the retail and food service sector. A comprehensive food safety system designed to be functional in retail and food service operations and based on the philosophy of hazard analysis and critical control point systems and a series of sound prerequisite programs can provide effective control of L. monocytogenes in these environments. However, competent delivery of food safety education and training to retail

  6. Review of tritiated water concentration technology

    International Nuclear Information System (INIS)

    Ma Hongbin

    2014-01-01

    In order to cooperate with the construction of the spent fuel reprocessing plant in China, the research and application status of tritiated water concentration technology at home and abroad were summarized. Some suggestions for the technology research route in China were put forward. (author)

  7. Experience in Reviewing Small Modular Reactor Technology

    International Nuclear Information System (INIS)

    Ahmad Nabil Abdul Rahim; Alfred, S.L.; Phongsakorn, P.

    2015-01-01

    Malaysia is in the stage of conducting Preliminary Technical Feasibility Study for the Deployment of Small Modular Reactor (SMR). There are different types of SMR, some already under construction in Argentina (CAREM) and China (HTR-PM) - (light water reactor and high temperature reactor technologies), others with near-term deployment such as SMART in South Korea, ACP100 in China, mPower and NuScale in the US, and others with longer term deployment prospects (liquid-metal cooled reactor technologies). The study was mainly to get an overview of the technology available in the market. The SMR ranking in the study was done through listing out the most deployable technology in the market according to their types. As a new comer country, the proven technology with an excellent operation history will usually be the main consideration points. (author)

  8. Review on postharvest technology of banana fruit

    African Journals Online (AJOL)

    mu

    2013-02-13

    Feb 13, 2013 ... The aim of this review is in threefold: First, to explore the effect of different preharvest treatments on postharvest ... biochemical changes in banana during development, maturation, ripening and storage were reviewed. Third, postharvest ..... at full mature stage for local domestic market (Gowen,. 1995).

  9. Development of advanced Czochralski Growth Process to produce low cost 150 KG silicon ingots from a single crucible for technology readiness

    Science.gov (United States)

    1981-01-01

    The goals in this program for advanced czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness are outlined. To provide a modified CG2000 crystal power capable of pulling a minimum of five crystals, each of approximately 30 kg in weight, 150 mm diameter from a single crucible with periodic melt replenishment. Crystals to have: resistivity of 1 to 3 ohm cm, p-type; dislocation density below 1- to the 6th power per cm; orientation (100); after growth yield of greater than 90%. Growth throughput of greater than 2.5 kg per hour of machine operation using a radiation shield. Prototype equipment suitable for use as a production facility. The overall cost goal is $.70 per peak watt by 1986. To accomplish these goals, the modified CG2000 grower and development program includes: (1) increased automation with a microprocessor based control system; (2) sensors development which will increase the capability of the automatic controls system, and provide technology transfer of the developed systems.

  10. Science and Technology Review, December 1997

    Energy Technology Data Exchange (ETDEWEB)

    Upadhye, R.

    1997-12-01

    Featured articles in this issue cover progress in these areas: Advancing Technologies and Applications in Nondestructive Evaluation; Atomic Engineering with Multilayers; Marrying Astrophysics with the Earth; Continuing Work in Breast Cancer Detection Technologies. Furthermore, this issue lists patents issued to and/or the awards received by Laboratory employees. It also includes an index of the contents of all the issues published in calendar year 1997.

  11. 2017 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-10-31

    The 2017 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 5-9, 2017, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 263 individual activities were reviewed for VTO by 191 reviewers. Exactly 1,241 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  12. 2016 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-12-01

    The 2016 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 6-9, 2016, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 226 individual activities were reviewed for VTO, by 171 reviewers. A total of 1,044 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  13. Science and Technology Peer Review: GPRA

    National Research Council Canada - National Science Library

    Kostoff, Ronald

    2003-01-01

    This report describes practical issues for federal agencies to consider if they choose program peer review for internal purposes and/ or to contribute to satisfying the requirements of the Government...

  14. Page Header Focus & Scope Author Guidelines Author Fees Online Submission Copyright Transfer Form Publication Ethics Screening For Plagiarism Editorial Board Reviewer Acknowledgement Reviewer's Guideline Order Journal Visitor Statistics CITATION ANALYSIS SCOPUS Google Scholar TEMPLATE MANUSCRIPT TEMPLATE TOOLS Mendeley Grammarly Screened by turnitin ETS NOTIFICATIONS View Subscribe USER Username Password Remember me Login JOURNAL CONTENT Search Search Scope Search Browse By Issue By Author By Title Other Journals ABOUT THE AUTHORS Said Jubran Universitas Gadjah Mada Indonesia Faculty of Economics and Business Sumiyana Sumiyana Universitas Gadjah Mada Faculty of Economics and Business ARTICLE TOOLS Print this article Indexing metadata How to cite item Email this article (Login required Email the author (Login required Save to Mendeley Save to Zotero ISSN ISSN ISSN 2338-5847 (online ISSN 2085-8272 (print ISSN 0215-2487 (previous KEYWORDS Bantuan Langsung Tunai (BLTp DiD model Indonesia Stigler’s contribution business sustainability, management-environmental aspects, business ethics, sustainable development child test score cigarettes corporate governance earthquake economic thought economics of information emotional exhaustion employee well-being ethical leadership noncompliance permanent income hypothesis tax administration tax reform transitory income wage-profit rate schedules work engagement HomeAboutLoginRegisterSearchCurrentArchivesAnnouncementsStatisticsIndexing & AbstractingContactAccreditation Home > Vol 30, No 2 (2015 >\tJubran THE TECHNOLOGY READINESS OR SOCIAL PRESENCE, WHICH ONE COULD EXPLAIN THE TECHNOLOGY ACCEPTANCE BETTER? AN INVESTIGATION ON VIRTUAL COMMUNITIES

    Directory of Open Access Journals (Sweden)

    Said Jubran

    2015-05-01

    Full Text Available Internet technology has accelerated the development of communities from face-to-face into computer-mediated communications. Individuals who joined the virtual communities contributed greatly to building their knowledge by sharing their experiences. This study investigates the individuals’ knowledge sharing intentions using two approaches for the research model. The first approach is adopted from Hung & Cheng’s (2013 model that incorporates technology readiness, compatibility and acceptance. The second approach is a new model built specifically for this study which combines the social presence and compatibility into the technology acceptance. Furthermore, this study compared both models to identify their ability to explain the individuals’ knowledge sharing intentions. This study’s results show that the first model is not better than the second. In the first model, the technology readiness, as represented only by the innovative, is the only one having a positive effect on the technology acceptance. Meanwhile, the three other constructs, i.e. optimism, discomfort, and insecurity are not. In the second model, the social presence and compatibility that are integrated into the Technology Acceptance Model could actually positively affect the technology acceptance. In the technology readiness model, the ease of the technology is not the indicator which assesses the usefulness of the technology. Meanwhile, in the social presence model, the ease of use affects the usefulness of the technology. Furthermore, both in the technology readiness and social presence models, the perceived usefulness and ease of use affect the knowledge sharing intentions. The study finds that the social presence is able to explain the knowledge sharing intentions better than the technology readiness does. It implies practically that virtual community providers should make individuals be more active in their virtual communities. Then, the providers could facilitate the

  15. Review of automated vehicle technology : policy and implementation implications.

    Science.gov (United States)

    2016-03-14

    The goals of this project were to undergo a systematic review of automated vehicle technologies with a focus on policy : implications, methods of implementation, regulation by states, and developments occurring on legal fronts, ultimately creating a ...

  16. Nonthermal processing technologies to improve the safety of raw meat and poultry products and ready-to-eat foods

    Science.gov (United States)

    Newly emerging nonthermal and advanced thermal processing technologies are now being adopted by the food processing industry for the purpose of providing safe and high quality food products to consumers. Scientists and engineers at USDA’s Eastern Regional Research Center in Wyndmoor, PA are activel...

  17. High-power, ultralow-mass solar arrays: FY-77 solar arrays technology readiness assessment report, volume 2

    Science.gov (United States)

    Costogue, E. N.; Young, L. E.; Brandhorst, H. W., Jr.

    1978-01-01

    Development efforts are reported in detail for: (1) a lightweight solar array system for solar electric propulsion; (2) a high efficiency thin silicon solar cell; (3) conceptual design of 200 W/kg solar arrays; (4) fluorocarbon encapsulation for silicon solar cell array; and (5) technology assessment of concentrator solar arrays.

  18. Review on Li-Fi Technology

    Science.gov (United States)

    Chaudhuri, Rajarshi Roy; Dutta, Kaustav; Saha, Archisman

    With advent of various communication technologies one can access the whole world at one go. The impact of internet on our day to day life has been so extensive that it is impossible to think of a day without it. It has become a fundamental requirement in our daily lives. Survey reports show that nearly 46 % of homes throughout the world have access to the internet. And the percentage is growing each day. With such a high demand there has been a looming Radio Frequency spectrum crisis, which paved the way of the invention of a new technology:-LI-FI. LI-FI, acronym of light fidelity, is a new wireless technology which has the ability to provide high speed internet connection within localized environment. Till today we are familiar with WI-FI which uses radio spectrum for communication. Even though it gives a speed of nearly 150 Mbps (as per IEEE802.11n), it isn't sufficient to satisfy all users. On the other hand LI-FI uses spectrum which comprises a wide range of frequencies, from the infrared through visible, down to the ultraviolet spectrum for communication which has the ability to produce a theoretical speed of 10 Gbps. It is not only confined to light-emitting diode (LED) or laser technology or to any specific receiving technique, LI-FI is a framework for all those technologies which provides new ways to all present as well as future services or applications.

  19. Ethical challenges with welfare technology: a review of the literature.

    Science.gov (United States)

    Hofmann, Bjørn

    2013-06-01

    Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

  20. Monitoring of structures: review of technologies

    International Nuclear Information System (INIS)

    2013-01-01

    Structural Health Monitoring (SHM) aims at monitoring the integrity of structures either in a continuous way or periodically. SHM is used for the monitoring of big civil works like bridges, dams, railways or critical structures like nuclear power plants or chemical plants. The sensors fixed on the structure allow an in-service monitoring. SHM gathers various technologies like ultrasound, acoustic emission, vibrations, Foucault currents...A technology based on guided ultrasonic waves (Lamb waves) appears promising for monitoring large structures made of composite materials. Another technology based on optical fibers can be used in very harsh environment and the optic fiber does not require any more sensors, the optical fiber itself being the sensor. The optical fiber is generally integrated to the structure during the construction phase. (A.C.)

  1. The paradox of imaging technology: A review of the literature

    International Nuclear Information System (INIS)

    Murphy, F.J.

    2006-01-01

    Purpose: The purpose of this study was to review the social scientific literature associated with medical imaging technology. Methods: An extensive search of published studies in nursing, psychology and anthropology was undertaken to support the radiography specific literature. Results: Following a broad definition of technology and its profound influence on society, an analysis of imaging literature revealed a complex relationship between technology and human interactions. Examples are cited for CT, MRI and ultrasound. Conclusion: It is suggested that any attempt to understand imaging technology must place at its centre the perspectives of patients and radiographers. Scientific descriptors must be balanced with equal deliberation given to 'soft technology'

  2. Lab on a chip technologies for algae detection : a review

    NARCIS (Netherlands)

    Schaap, A.M.; Rohrlack, T.; Bellouard, Y.J.

    2012-01-01

    Over the last few decades, lab on a chip technologies have emerged as powerful tools for high-accuracy diagnosis with minute quantities of liquid and as tools for exploring cell properties in general. In this paper, we present a review of the current status of this technology in the context of algae

  3. Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Annual report, October 1, 1996--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  4. Review of Trenchless Technologies' Successes and their ...

    African Journals Online (AJOL)

    ... costly construction modifications, and use of substandard borrow material, environmental damage to the site, post construction remedial work, and even failure of a structure and subsequent litigation. Trenchless technology can be defined as the use of construction methods to install and repair underground infrastructure ...

  5. Advance in Bioaerosol Removal Technologies; A Review

    Directory of Open Access Journals (Sweden)

    Ahmad Jonidi Jafari

    2018-03-01

    Full Text Available Bioaerosols are air pollutants that affect human health in various routes. They are characteristically diverse; such as bacteria, viruses and fungi, that everyone has different characteristics and effects, various solutions and technologies are studied or applied for their removal and inactivation. Regarding to lack of specific and integrated publications about the different air quality guidelines for bioaerosols and the methods and technologies, attending to approach the standards, purpose of this study was set on the development of the issue. The importance of presence of bioaerosols in breathing air and related standards and guidelines, also controlling technologies such as filtration, ultraviolet (UV radiation, photo catalyst, temperature and electrostatic precipitators were surveyed in this study by using the scientific literature.Given the results, UV irradiation and photocatalytic methods are ineffective for allergens. In this way, filtration is unable for inactivation of the bioaerosols, then there is the threat that they can aerosolize again. Hence, these technologies individually cannot provide the air quality standards which have established for sensitive conditions such as operation rooms. Regarding the discussions, application of the methods that include collection and inactivation of the bioaerosols simultaneously, such as electrostatic precipitators, could be more effective in the likewise environments.

  6. Wearable technology for spine movement assessment: A systematic review

    OpenAIRE

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H.

    2017-01-01

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies t...

  7. PV ready roofing systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The integration of PV technology into roofs of houses has become very popular in the United States, Japan, Germany and The Netherlands. There could be a considerable market in the UK for these systems, given the large number of houses that are projected to be built in the next 10 years, and taking account of increased awareness of energy issues. A significant proportion of the market share of annual installed PV is for solar PV systems installed into homes (currently 15%), this is expected to rise to 23% (900MW) by 2010. The grid connected roof and building mounted facade systems represent the fastest growing market for PV systems in Europe. In conclusion, therefore, innovative approached for fixing PV technology onto roofs have been identified for both domestic roofs and for the commercial sector. With reference to production methodologies within the roofing industry, both approaches should be capable of being designed with PV-ready connections suitable for fixing PV modules at a later date. This will help overcome the key barriers of cost of installation, skills required and the lack of retrofit potential. Based on the results of this project, Sustainable Energy together with PV Systems are keen to take forward the full research and development of PV-ready systems for both the domestic and commercial sectors.

  8. Personal radiation detector at a high technology readiness level that satisfies DARPA's SN-13-47 and SIGMA program requirements

    Science.gov (United States)

    Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

    2015-06-01

    There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA's initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

  9. 2009 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-01

    Annual Merit Review and Peer Evaluation Meeting to review the FY2008 accomplishments and FY2009 plans for the Vehicle Technologies Program, and provide an opportunity for industry, government, and academic to give inputs to DOE on the Program with a structured and formal methodology.

  10. Modern breast cancer detection: a technological review.

    Science.gov (United States)

    Nover, Adam B; Jagtap, Shami; Anjum, Waqas; Yegingil, Hakki; Shih, Wan Y; Shih, Wei-Heng; Brooks, Ari D

    2009-01-01

    Breast cancer is a serious threat worldwide and is the number two killer of women in the United States. The key to successful management is screening and early detection. What follows is a description of the state of the art in screening and detection for breast cancer as well as a discussion of new and emerging technologies. This paper aims to serve as a starting point for those who are not acquainted with this growing field.

  11. Energy and technology review, March 1995

    International Nuclear Information System (INIS)

    Bookless, W.A.; Wheatcraft, D.

    1995-03-01

    This journal contains two feature articles. The first article reports on the background, design, and capabilities of the Portable Tritium Processing System currently being used to clean up and decontaminate the Laboratory's Tritium Facility. The second article discusses the development of a x-ray lasers as a probe to obtain high-resolution images of high-density plasmas produced at the Nova laser facility. Finally, two research programs are highlighted. They are silicon microcomponents and modern technology for advanced military training

  12. State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels

    Science.gov (United States)

    Javed, Kamran; Gouriveau, Rafael; Zerhouni, Noureddine

    2017-09-01

    Integrating prognostics to a real application requires a certain maturity level and for this reason there is a lack of success stories about development of a complete Prognostics and Health Management system. In fact, the maturity of prognostics is closely linked to data and domain specific entities like modeling. Basically, prognostics task aims at predicting the degradation of engineering assets. However, practically it is not possible to precisely predict the impending failure, which requires a thorough understanding to encounter different sources of uncertainty that affect prognostics. Therefore, different aspects crucial to the prognostics framework, i.e., from monitoring data to remaining useful life of equipment need to be addressed. To this aim, the paper contributes to state of the art and taxonomy of prognostics approaches and their application perspectives. In addition, factors for prognostics approach selection are identified, and new case studies from component-system level are discussed. Moreover, open challenges toward maturity of the prognostics under uncertainty are highlighted and scheme for an efficient prognostics approach is presented. Finally, the existing challenges for verification and validation of prognostics at different technology readiness levels are discussed with respect to open challenges.

  13. Multisensory Technology for Flavor Augmentation: A Mini Review.

    Science.gov (United States)

    Velasco, Carlos; Obrist, Marianna; Petit, Olivia; Spence, Charles

    2018-01-01

    There is growing interest in the development of new technologies that capitalize on our emerging understanding of the multisensory influences on flavor perception in order to enhance human-food interaction design. This review focuses on the role of (extrinsic) visual, auditory, and haptic/tactile elements in modulating flavor perception and more generally, our food and drink experiences. We review some of the most exciting examples of recent multisensory technologies for augmenting such experiences. Here, we discuss applications for these technologies, for example, in the field of food experience design, in the support of healthy eating, and in the rapidly growing world of sensory marketing. However, as the review makes clear, while there are many opportunities for novel human-food interaction design, there are also a number of challenges that will need to be tackled before new technologies can be meaningfully integrated into our everyday food and drink experiences.

  14. Multisensory Technology for Flavor Augmentation: A Mini Review

    Directory of Open Access Journals (Sweden)

    Carlos Velasco

    2018-01-01

    Full Text Available There is growing interest in the development of new technologies that capitalize on our emerging understanding of the multisensory influences on flavor perception in order to enhance human–food interaction design. This review focuses on the role of (extrinsic visual, auditory, and haptic/tactile elements in modulating flavor perception and more generally, our food and drink experiences. We review some of the most exciting examples of recent multisensory technologies for augmenting such experiences. Here, we discuss applications for these technologies, for example, in the field of food experience design, in the support of healthy eating, and in the rapidly growing world of sensory marketing. However, as the review makes clear, while there are many opportunities for novel human–food interaction design, there are also a number of challenges that will need to be tackled before new technologies can be meaningfully integrated into our everyday food and drink experiences.

  15. Developmental Readiness of Normal Full Term Infants To Progress from Exclusive Breastfeeding to the Introduction of Complementary Foods: Reviews of the Relevant Literature Concerning Infant Immunologic, Gastrointestinal, Oral Motor and Maternal Reproductive and Lactational Development.

    Science.gov (United States)

    Naylor, Audrey J., Ed.; Morrow, Ardythe L., Ed.

    This review of the developmental readiness of normal, full-term infants to progress from exclusive breastfeeding to the introduction of complementary foods is the result of the international debate regarding the best age to introduce complementary foods into the diet of the breastfed human infant. After a list of definitions, four papers focus on:…

  16. Proceedings of the fuels technology contractors review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Malone, R.D. [ed.

    1993-11-01

    The Fuels Technology Contractors Review Meeting was held November 16-18, 1993, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. This meeting was sponsored and hosted by METC, the Office of Fossil Energy, U.S. Department of Energy (DOE). METC periodically provides an opportunity to bring together all of the R&D participants in a DOE-sponsored contractors review meeting to present key results of their research and to provide technology transfer to the active research community and to the interested public. This meeting was previously called the Natural Gas Technology Contractors Review Meeting. This year it was expanded to include DOE-sponsored research on oil shale and tar sands and so was retitled the Fuels Technology Contractors Review Meeting. Current research activities include efforts in both natural gas and liquid fuels. The natural gas portion of the meeting included discussions of results summarizing work being conducted in fracture systems, both natural and induced; drilling, completion, and stimulation research; resource characterization; delivery and storage; gas to liquids research; and environmental issues. The meeting also included project and technology summaries on research in oil shale, tar sands, and mild coal gasification, and summaries of work in natural-gas fuel cells and natural-gas turbines. The format included oral and poster session presentations. Individual papers have been processed separately for inclusion in the Energy Science and Technology database.

  17. Operational readiness of EFAD systems

    International Nuclear Information System (INIS)

    Kabat, M.J.

    1992-02-01

    An assessment of the operational readiness of the Emergency Filtered Air Discharge (EFAD) systems, installed in Canadian CANDU multi-unit nuclear power plants, was performed in this project. Relevant Canadian and foreign standards and regulatory requirements have been reviewed and documentation on EFAD system design, operation, testing and maintenance have been assessed to identify likely causes and potential failures of EFAD systems and their components under both standby and accident conditions. Recommendations have also been provided in this report for revisions which are needed to achieve and maintain appropriate operational readiness of EFAD systems

  18. Science and Technology Review October 1999

    International Nuclear Information System (INIS)

    Eimerl, D.

    1999-01-01

    The following titles are in the review: The Laboratory in the News; Commentary about the year's R and D 100 Honors; The Optical Modulator and Switch: Light on the Move; From Dinosaur Bones to Software, Gamma Rays Protect Property; High-Power Green Lasers Open up Precision Machining; Breakthrough Design for Accelerators; New Deposition System for the Microchip Revolution; and PEREGRINEtrademark Takes Aim at Cancer Tumors

  19. Future Research in Health Information Technology: A Review.

    Science.gov (United States)

    Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammad Reza; Saghafi, Fatemeh

    2017-01-01

    Currently, information technology is considered an important tool to improve healthcare services. To adopt the right technologies, policy makers should have adequate information about present and future advances. This study aimed to review and compare studies with a focus on the future of health information technology. This review study was completed in 2015. The databases used were Scopus, Web of Science, ProQuest, Ovid Medline, and PubMed. Keyword searches were used to identify papers and materials published between 2000 and 2015. Initially, 407 papers were obtained, and they were reduced to 11 papers at the final stage. The selected papers were described and compared in terms of the country of origin, objective, methodology, and time horizon. The papers were divided into two groups: those forecasting the future of health information technology (seven papers) and those providing health information technology foresight (four papers). The results showed that papers related to forecasting the future of health information technology were mostly a literature review, and the time horizon was up to 10 years in most of these studies. In the health information technology foresight group, most of the studies used a combination of techniques, such as scenario building and Delphi methods, and had long-term objectives. To make the most of an investment and to improve planning and successful implementation of health information technology, a strategic plan for the future needs to be set. To achieve this aim, methods such as forecasting the future of health information technology and offering health information technology foresight can be applied. The forecasting method is used when the objectives are not very large, and the foresight approach is recommended when large-scale objectives are set to be achieved. In the field of health information technology, the results of foresight studies can help to establish realistic long-term expectations of the future of health information

  20. Technology Readiness Level (TRL) Advancement of the MSPI On-Board Processing Platform for the ACE Decadal Survey Mission

    Science.gov (United States)

    Pingree, Paula J.; Werne, Thomas A.; Bekker, Dmitriy L.; Wilson, Thor O.

    2011-01-01

    The Xilinx Virtex-5QV is a new Single-event Immune Reconfigurable FPGA (SIRF) device that is targeted as the spaceborne processor for the NASA Decadal Survey Aerosol-Cloud-Ecosystem (ACE) mission's Multiangle SpectroPolarimetric Imager (MSPI) instrument, currently under development at JPL. A key technology needed for MSPI is on-board processing (OBP) to calculate polarimetry data as imaged by each of the 9 cameras forming the instrument. With funding from NASA's ESTO1 AIST2 Program, JPL is demonstrating how signal data at 95 Mbytes/sec over 16 channels for each of the 9 multi-angle cameras can be reduced to 0.45 Mbytes/sec, thereby substantially reducing the image data volume for spacecraft downlink without loss of science information. This is done via a least-squares fitting algorithm implemented on the Virtex-5 FPGA operating in real-time on the raw video data stream.

  1. Science & Technology Review May/June 2008

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2008-03-19

    This month's issue has the following articles: (1) Biomedical Technology Has a Home at Livermore--Commentary by Cherry A. Murray; (2) Shaping the Future of Aneurysm Treatments--Livermore foam devices may offer significant advantages for treating some forms of aneurysms; (3) Ring around a Stellar Shell: A Tale of Scientific Serendipity--Using a three-dimensional model, Livermore scientists have solved a long-standing puzzle of stellar evolution; and (4) On Assignment in Washington, DC--Livermore personnel in Washington, DC, support federal sponsors and become valuable assets to Laboratory programs.

  2. A Review of Energy Storage Technologies

    DEFF Research Database (Denmark)

    Connolly, David

    2010-01-01

    A brief examination into the energy storage techniques currently available for the integration of fluctuating renewable energy was carried out. These included Pumped Hydroelectric Energy Storage (PHES), Underground Pumped Hydroelectric Energy Storage (UPHES), Compressed Air Energy Storage (CAES...... than PHES depending on the availability of suitable sites. FBES could also be utilised in the future for the integration of wind, but it may not have the scale required to exist along with electric vehicles. The remaining technologies will most likely be used for their current applications...

  3. Dielectric and Insulating Technology 2004 : Review & Forecast

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of DEIS activites. DEIS activiteis are basically based on the activites of 8-10 investigation committees’ under DEIS committee. Recent DEIS activites are categlized into three functions in this article and remarkable activity or trend of each category is mentioned. Those are activities on insulation diagnosis (AI application and asset management), activities on new insulation technology for power tansmission (high Tc super conducting cable insulation and all solid sinulated substation), and activities on new insulating materials (Nanocomposite).

  4. Dielectric and Insulating Technology 2005 : Reviews & Forecasts

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of TC-DEI ( Technical Committee of Dielectrics and Electrical Insulation of IEEJ) activites. The activiteis are basically based on the activites of 8-10 investigation committees under TC-DEI. Recent activites were categorized into three functions in this article and remarkable activity or trend for each category is mentioned as was done in the article of 2003. Thoese are activities on asset management (AI application and insulation diagnosis), activities on new insulating and functional materials (Nano composite) and activities on new insulation technology for power tansmission (high Tc superconducting cable insulation).

  5. Dielectric and Insulating Technology 2006 : Review & Forecast

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of TC-DEI ( Technical Committee of Dielectrics and Electrical Insulation of IEEJ) activites. The activiteis are basically based on the activites of 8-10 investigation committees under TC-DEI. Recent activites were categorized into three functions in this article and remarkable activity or trend for each category is mentioned as was seen in the articles of 2005. Those are activities on asset management (AI application and insulation diagnosis), activities on new insulating and functional materials (Nano composite) and activities on new insulation technology for power tansmission (high Tc superconducting cable insulation).

  6. Science and technology review, April 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Stull, S. [eds.

    1996-04-01

    There are two main feature articles in this publication. The first article tells of how using off-the-shelf computers, state-of-the-art CCDs, and a network of collaborators, scientist at Lawrence Livermore National Lab explore the composition of dark matter. Indications are that MACHOs (MAssive Compact Halo Objects) make up the bulk of dark matter in the universe. The second article discusses a new breed of Livermore-developed, flywheel-based energy storage systems using new materials, new technologies, and new thinking to develop a new electromechanical battery. Patents and research highlights are also listed in this publication.

  7. 2016 National Algal Biofuels Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Barry, Amanda [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bioenergy Technologies Office, Washington, DC (United States); Wolfe, Alexis [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); English, Christine [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bioenergy Technologies Office, Washington, DC (United States); Ruddick, Colleen [BCS, Incorporated, Washington, DC (United States); Lambert, Devinn [Bioenergy Technologies Office, Washington, DC (United States)

    2016-06-01

    The Bioenergy Technologies Office (BETO) of the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, is committed to advancing the vision of a viable, sustainable domestic biomass industry that produces renewable biofuels, bioproducts, and biopower; enhances U.S. energy security; reduces our dependence on fossil fuels; provides environmental benefits; and creates economic opportunities across the nation. BETO’s goals are driven by various federal policies and laws, including the Energy Independence and Security Act of 2007 (EISA). To accomplish its goals, BETO has undertaken a diverse portfolio of research, development, and demonstration (RD&D) activities, in partnership with national laboratories, academia, and industry.

  8. Online Technologies for Health Information and Education: A literature review.

    Science.gov (United States)

    Gill, Harkiran K; Gill, Navkiranjit; Young, Sean D

    2013-04-01

    There is a growing body of research focused on the use of social media and Internet technologies for health education and information sharing. The authors reviewed literature on this topic, with a specific focus on the benefits and concerns associated with using online social technologies as health education and communication tools. Studies suggest that social media technologies have the potential to safely and effectively deliver health education, if privacy concerns are addressed. Utility of social media-based health education and communication will improve as technology developers and public health officials determine ways to improve information accuracy and address privacy concerns.

  9. Remedial action and waste disposal project - ERDF readiness evaluation plan

    International Nuclear Information System (INIS)

    Casbon, M.A.

    1996-06-01

    This Readiness Evaluation Report presents the results of the project readiness evaluation to assess the readiness of the Environmental Restoration and Disposal Facility. The evaluation was conducted at the conclusion of a series of readiness activities that began in January 1996. These activities included completion of the physical plant; preparation, review, and approval of operating procedures; definition and assembly of the necessary project and operational organizations; and activities leading to regulatory approval of the plant and operating plans

  10. Occupational Safety Review of High Technology Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee Cadwallader

    2005-01-31

    This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

  11. Some Thoughts on Systematic Reading Readiness Instruction.

    Science.gov (United States)

    Palardy, J. Michael

    1984-01-01

    Examines four specific areas of reading readiness--visual discrimination, visual memory, auditory discrimination, and auditory comprehension--and reviews teaching strategies in each of the four areas. (FL)

  12. Science & Technology Review November/December 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2008-10-07

    This months issue has the following articles: (1) Innovation Is Key to Prosperity and Security --Commentary by Erik J. Stenehjem; (2) Taking Ultrafast Snapshots of Material Changes--The dynamic transmission electron microscope captures images a million times faster than conventional instruments; (3) Automated Technology for Laser Fusion Systems--The first completely computer-controlled system for aligning laser beams is helping make fusion research possible; (4) Protecting the Nation through Secure Cargo--A new device tracks and monitors cargo containers during transit to improve national security; (5) Atom by Atom, Layer by Layer--Extremely thin sandwiches of materials called nanolaminates exhibit remarkable, highly useful properties; and (6) Predicting the Bizarre Properties of Plutonium--A supercomputing 'grand challenge' team has made highly precise predictions of the behavior of plutonium's most important solid phase.

  13. Science & Technology Review January/February 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-11-30

    This month's issue has the following articles: (1) Innovative Materials Rise to the Radiation Challenge - Commentary by Bruce Warner; (2) The Hunt for Better Radiation Detection - New materials will help radiation detectors pick up weak signals and accurately identify illicit radioactive sources; (3) Time-Critical Technology Identifies Deadly Bloodborne Pathogens - A portable device can simultaneously distinguish up to five bloodborne pathogens in just minutes; (4) Defending Computer Networks against Attack - A Laboratory effort takes a new approach to detecting increasingly sophisticated cyber attacks; and (5) Imaging Cargo's Inner Secrets - Livermore-University of California collaborators are modeling a new radiographic technique for identifying nuclear materials concealed inside cargo containers.

  14. Science and Technology Review December 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2011-11-01

    This month's issue has the following articles: (1) High-Performance Computing for Energy Innovation - Commentary by Tomas Diaz de la Rubia; (2) Simulating the Next Generation of Energy Technologies - Projects using high-performance computing demonstrate Livermore's computational horsepower and improve the quality of energy solutions and the speed of deployment; (3) ARC Comes into Focus - The Advanced Radiographic Capability, a petawatt-class laser, can penetrate dense objects to reveal material dynamics during National Ignition Facility experiments; (4) A New Method to Track Viral Evolution - A sensitive technique developed at the Laboratory can identify virus mutations that may jump from host to host; and (5) Data for Defense: New Software Finds It Fast - Department of Defense warfighters and planners are using Livermore software systems to extract pertinent information from massive amounts of data.

  15. Science and Technology Review March 2012

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2012-02-15

    This month's issue has the following articles: (1) Honoring a Legacy of Service to the Nation - The nation pays tribute to George Miller, who retired in December 2011 as the Laboratory's tenth director; (2) Life-Extension Programs Encompass All Our Expertise - Commentary by Bruce T. Goodwin; (3) Extending the Life of an Aging Weapon - Stockpile stewards have begun work on a multiyear effort to extend the service life of the aging W78 warhead by 30 years; (4) Materials by Design - Material microstructures go three-dimensional with improved additive manufacturing techniques developed at Livermore; (5) Friendly Microbes Power Energy-Producing Devices - Livermore researchers are demonstrating how electrogenic bacteria and microbial fuel cell technologies can produce clean, renewable energy and purify water; and (6) Chemical Sensor Is All Wires, No Batteries - Livermore's 'batteryless' nanowire sensor could benefit applications in diverse fields such as homeland security and medicine.

  16. Science and Technology Review December 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-11-17

    This month's issue has the following articles: (1) Advanced Materials for Our Past, Present, and Future - Commentary by Tomas Diaz de la Rubia; (2) A Defensive 'Coat' for Materials under Attack - Amorphous metal coatings provide the strength and corrosion resistance needed to protect military vessels and spent nuclear fuel containers; (3) Too Close for Comfort - Laboratory scientists are analyzing the feasibility of using nuclear explosives to disrupt or divert asteroids on a collision course with Earth; (4) Hyperion: A Titan of High-Performance Computing Systems - Livermore is collaborating with 10 computing industry leaders to create a test bed for Linux cluster hardware and software technologies; (5) Isolating Pathogens for Speedy Identification - An automated miniature device separates viruses, bacteria, genetic material, and proteins from nasal swabs and blood and urine samples for speedy identification.

  17. Deviation Among Technology Reviews: An Informative Enrichment of Technology Evolution Theory for Marketing

    NARCIS (Netherlands)

    A. Sood (Ashish); S. Stremersch (Stefan)

    2010-01-01

    textabstractUnderstanding technological change is of critical importance to marketers, as it bears new markets, new brands, new customers, and new market leaders. This paper examines the deviation among reviews of a technology’s performance and its consequences for inferences on technology evolution

  18. Reviews of accelerator science and technology

    CERN Document Server

    Chou, Weiren

    2008-01-01

    Particle accelerators are a major invention of the 20th century. In the last eight decades, they have evolved enormously and have fundamentally changed the way we live, think and work. Accelerators are the most powerful microscopes for viewing the tiniest inner structure of cells, genes, molecules, atoms and their constituents such as protons, neutrons, electrons, neutrinos and quarks. This opens up a whole new world for materials science, chemistry and molecular biology.Accelerators with megawatt beam power may ultimately solve a critical problem faced by our society, namely, the treatment of nuclear waste and the supply of an alternative type of energy. There are also tens of thousands of small accelerators all over the world. They are used every day for medical imaging, cancer therapy, radioisotope production, high-density chip-making, mass spectrometry, cargo x-ray/gamma-ray imaging, detection of explosives and illicit drugs, and weapons. This volume provides a comprehensive review of this driving and fas...

  19. Science & Technology Review April/May 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-03-23

    This month's issue has the following articles: (1) Leveraging the National Ignition Facility to Meet the Climate-Energy Challenge--Commentary by George H. Miller; (2) The Journey into a New Era of Scientific Discoveries--The world's largest laser is dedicated on May 29, 2009; (3) Safe and Sustainable Energy with LIFE--A revolutionary technology to generate electricity, modeled after the National Ignition Facility, could either be a pure fusion energy source or combine the best of fusion and fission energy; (4) A Simulated Rehearsal for Battle--Livermore's Joint Conflict and Tactical Simulation is the most widely used tactical model in the world; (5) Improving Catalysis with a 'Noble' Material--By infusing carbon aerogels with platinum, researchers have produced a more affordable and efficient catalytic material; and (6) A Time Machine for Fast Neutrons--A new, robust time-projection chamber that provides directional detection of fast neutrons could greatly improve search methods for nuclear materials.

  20. Health implications of new-age technologies: a systematic review.

    Science.gov (United States)

    Bilgrami, Zaid; McLAUGHLIN, Laura; Milanaik, Ruth; Adesman, Andrew

    2017-08-01

    New-age technologies are ubiquitous in the lives of adolescents. Recent trends in media use suggest that adolescents are spending more time than ever engaging with technologies, and are able to do so in virtually all settings at any time. Given that new-age technologies are so heavily integrated within the daily life of adolescents, the health risks and benefits they offer must be closely examined. In this systematic review, we present recent literature related to the implications of new-age technologies on adolescent health. A total of 94 articles published since 2006 were collected using PubMed and Google Scholar on the most popular new-age technologies among adolescents: the internet, television, cell phones, and video games. The current body of research highlights several health risks related to these technologies. Nearly all have the potential for addiction, which can result in other symptoms and impair one's daily life. Excessive use can affect several components of health, such as quality of sleep, body composition, and mental well-being, and certain practices (viewing pornography, sexting) can lead to risky sexual behaviors. However, the technologies discussed in the present review also have tremendous potential to promote adolescent health. Pediatricians must educate parents and patients on how to safely use technology to minimize the potentially harmful outcomes.

  1. Emerging desalination technologies for water treatment: a critical review.

    Science.gov (United States)

    Subramani, Arun; Jacangelo, Joseph G

    2015-05-15

    In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Review of casing while drilling technology

    Directory of Open Access Journals (Sweden)

    Pavković Bojan

    2016-01-01

    Full Text Available Conventional drilling methods have been plagued with huge operational and financial challenges, such as cost of purchasing, inspecting, handling, transporting the drill equipment and most importantly, tripping in-and-out of the drill string whenever the Bottom Hole Assembly (BHA needs a replacement, needs of wiper trip or when total depth is reached. The tripping in-and-out of the drill string not only contributes to Non Productive Time (NPT but also leads to well control difficulties including wellbore instability and lost circulation. All this has led Oil and Gas industry, as well as any other engineering industry, to seek for new ways and methods in order to reduce these problems. Thanks to the advances in technical solutions and constant improvements of conventional drilling methods, a new drilling method - casing while drilling has been developed. Casing Drilling encompasses the process of simultaneously drilling and casing a well, using the active casing and thus optimizes the production. This paper presents a review of casing while drilling method (CwD and its practical usage in drilling wells. The comparison of conventional drilling method and casing while drilling is also presented. The CwD method achieves significantly better results than conventional drilling method.

  3. Foam-mat drying technology: A review.

    Science.gov (United States)

    Hardy, Z; Jideani, V A

    2017-08-13

    This article reviews various aspects of foam-mat drying such as foam-mat drying processing technique, main additives used for foam-mat drying, foam-mat drying of liquid and solid foods, quality characteristics of foam-mat dried foods, and economic and technical benefits for employing foam-mat drying. Foam-mat drying process is an alternative method that allows the removal of water from liquid materials and pureed materials. In this drying process, a liquid material is converted into foam that is stable by being whipped after adding an edible foaming agent. The stable foam is then spread out in sheet or mat and dried by using hot air (40-90°C) at atmospheric pressure. Methyl cellulose (0.25-2%), egg white (3-20%), maltodextrin (0.5-05%), and gum Arabic (2-9%) are the commonly utilized additives for the foam-mat drying process at the given range, either combined together for their effectiveness or individual effect. The foam-mat drying process is suitable for heat sensitive, viscous, and sticky products that cannot be dried using other forms of drying methods such as spray drying because of the state of product. More interest has developed for foam-mat drying because of the simplicity, cost effectiveness, high speed drying, and improved product quality it provides.

  4. Plastic solid waste utilization technologies: A Review

    Science.gov (United States)

    Awasthi, Arun Kumar; Shivashankar, Murugesh; Majumder, Suman

    2017-11-01

    Plastics are used in more number of applications in worldwide and it becomes essential part of our daily life. In Indian cities and villages people use the plastics in buying vegetable as a carry bag, drinking water bottle, use of plastic furniture in home, plastics objects uses in kitchen, plastic drums in packing and storage of the different chemicals for industrial use, use plastic utensils in home and many more uses. After usage of plastics it will become part of waste garbage and create pollution due to presence of toxic chemicals and it will be spread diseases and give birth to uncontrolled issues in social society. In current scenario consumption of plastic waste increasing day by day and it is very difficult to manage the plastic waste. There are limited methodologies available for reutilization of plastic waste again. Such examples are recycling, landfill, incineration, gasification and hydrogenation. In this paper we will review the existing methodologies of utilization of plastic waste in current scenario

  5. Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

    Science.gov (United States)

    Strudwick, Gillian

    2015-05-01

    The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

  6. A review of multifunctional structure technology for aerospace applications

    Science.gov (United States)

    Sairajan, K. K.; Aglietti, G. S.; Mani, K. M.

    2016-03-01

    The emerging field of multifunctional structure (MFS) technologies enables the design of systems with reduced mass and volume, thereby improving their overall efficiency. It requires developments in different engineering disciplines and their integration into a single system without degrading their individual performances. MFS is particularly suitable for aerospace applications where mass and volume are critical to the cost of the mission. This article reviews the current state of the art of multifunctional structure technologies relevant to aerospace applications.

  7. Technology-Enhanced Peer Review: Benefits and Implications of Providing Multiple Reviews

    DEFF Research Database (Denmark)

    Papadopoulos, Pantelis M.; Lagkas, Thomas D.; Demetriadis, Stavros N.

    2017-01-01

    This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students...... were randomly assigned in two conditions and engaged in peer review activity facilitated by a web-based learning environment asking them to provide multiple reviews. In the Peer Reviewed (PR) condition students both reviewed peer work and received peer comments for their own work. By contrast......, in the Self Reviewed (SR) condition students provided peer reviews, but did not receive any. Instead, they were asked to perform self reviewing, before proceeding to any revisions of their work. Result showed that the two groups were comparable in all aspects, suggesting that the lack of getting peer reviews...

  8. Managing diabetes mellitus using information technology: a systematic review.

    Science.gov (United States)

    Riazi, H; Larijani, B; Langarizadeh, M; Shahmoradi, L

    2015-01-01

    To review published evidences about using information technology interventions in diabetes care and determine their effects on managing diabetes. Systematic review of information technology based interventions. MEDLINE®/PubMed were electronically searched for articles published between 2004/07/01 and 2014/07/01. A comprehensive, electronic search strategy was used to identify eligible articles. Inclusion criteria were defined based on type of study and effect of information technology based intervention in relation to glucose control and other clinical outcomes in diabetic patients. Studies must have used a controlled design to evaluate an information technology based intervention. A total of 3613 articles were identified based on the searches conducted in MEDLINE from PubMed. After excluding duplicates (n = 6), we screened titles and abstracts of 3607 articles based on inclusion criteria. The remaining articles matched with inclusion criteria (n = 277) were reviewed in full text, and 210 articles were excluded based on exclusion criteria. Finally, 67 articles complied with our eligibility criteria and were included in this study. In this study, the effect of various information technology based interventions on clinical outcomes in diabetic patients extracted and measured from selected articles is described and compared to each other. Information technology based interventions combined with the usual care are associated with improved glycemic control with different efficacy on various clinical outcomes in diabetic patients.

  9. Review of Social and Organizational Issues in Health Information Technology

    OpenAIRE

    Kuziemsky, Craig E.

    2015-01-01

    Objectives This paper reviews organizational and social issues (OSIs) in health information technology (HIT). Methods A review and synthesis of the literature on OSIs in HIT was conducted. Results Five overarching themes with respect to OSIs in HIT were identified and discussed: scope and frameworks for defining OSIs in HIT, context matters, process immaturity and complexity, trade-offs will happen and need to be discussed openly, and means of studying OSIs in HIT. Conclusions There is a wide...

  10. Review of Military Mountain Medicine Technology and Research Barriers

    Science.gov (United States)

    2011-09-01

    2.4.5 Nutritional and Hydration Guidelines 7 3.0 Review of Militarily-Relevant Mountain Medicine Technology and 7 Research Barriers 3.1...Interventions ( nutritional , pharmaceutical) to improve troop performance and health during high altitude deployments. 3) Prepare a report that: REVIEW OF...Edema (HAPE). The signs and symptoms of AMS are headache accompanied by insomnia, unusual fatigue, dizziness, anorexia , and nausea. AMS is not

  11. Science and Technology Review October/November 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, Rebecca J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-08-25

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. This is the October/November 2011 issue, with the cover story being "Proton Therapy Advances Cancer Treatment."

  12. Mobile technology in health information systems - a review.

    Science.gov (United States)

    Zhang, X-Y; Zhang, P-Y

    2016-05-01

    Mobile technology is getting involved in every sphere of life including medical health care. There has been an immense upsurge in mobile phone-based health innovations these days. The expansion of mobile phone networks and the proliferation of inexpensive mobile handsets have made the digital information and communication technology capabilities very handy for the people to exploit if for any utility including health care. The mobile phone based innovations are able to transform weak and under performing health information system into more modern and efficient information system. The present review article will enlighten all these aspects of mobile technology in health care.

  13. Assistive technology for communication of older adults: a systematic review.

    Science.gov (United States)

    Pedrozo Campos Antunes, Thaiany; Souza Bulle de Oliveira, Acary; Hudec, Robert; Brusque Crocetta, Tania; Ferreira de Lima Antão, Jennifer Yohanna; de Almeida Barbosa, Renata Thais; Guarnieri, Regiani; Massetti, Thais; Garner, David M; de Abreu, Luiz Carlos

    2018-02-16

    Describe the use of assistive technology to enhance communication opportunities for older adults. A systematic review was conducted in two databases, PubMed and Web of Science, by using two different searches in each. The search was limited to original articles, in English language, including people aged 60 years and older that used any type of assistive technology for communication. The articles found in the initial search were filtered by title, abstracts and the remaining articles were fully read. Eighteen studies were included in this review after the reading of full-texts. Most of the studies included apparently healthy participants with communication limitations due to aging related changes and the others included people with some pathology that prevent them from normal communication. Four categories of assistive technology were identified: assistive technology for people with speech problems; robot or videoconferencing systems; Information and Communication Technologies and, other types of assistive technology for communication, such as hearing aids and scrapbooks. Assistive technology for communication of older adults is not only used by people with disabilities that prevent them from usual communication. They are mostly for older adults without a pathological communication problem.

  14. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  15. 78 FR 11902 - Review of Gun Safety Technologies

    Science.gov (United States)

    2013-02-20

    ... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1615] Review of Gun Safety...'s Plan to reduce gun violence released on January 16, 2013, the U.S. Department of Justice, Office... emerging gun safety technologies and plans to issue a report on the availability and use of those...

  16. RESIDENTIAL WOOD COMBUSTION TECHNOLOGY REVIEW VOLUME 1. TECHNICAL REPORT

    Science.gov (United States)

    This report gives results of a review of the current state-of-the-art of residential wood combustion (RWC). The key environmental parameter of concern was the air emission of particles. The technological status of all major RWC categories -- cordwood stoves, fireplaces, masonry h...

  17. RESIDENTIAL WOOD COMBUSTION TECHNOLOGY REVIEW - VOLUME 2. APPENDICES

    Science.gov (United States)

    The report gives results of a review of the current state-of-the-art of residential wood combustion (RWC). The key environmental parameter of concern was the air emission of particles. The technological status of all major RWC categories--cordwood stoves, fireplaces, masonry heat...

  18. Working Together: A Literature Review of Campus Information Technology Partnerships

    Science.gov (United States)

    Exline, Eleta

    2009-01-01

    This article reviews the recent literature about the essential but often uneasy alliances made between content experts (archivists and librarians) and technology experts. Differing professional cultures, misunderstandings of one another, limited abilities to envision change, and lack of support from top-level administrators are the most often…

  19. Caffeine to optimize cognitive function for military mission-readiness: a systematic review and recommendations for the field.

    Science.gov (United States)

    Crawford, Cindy; Teo, Lynn; Lafferty, Lynn; Drake, Angela; Bingham, John J; Gallon, Matthew D; O'Connell, Meghan L; Chittum, Holly K; Arzola, Sonya M; Berry, Kevin

    2017-06-01

    In 2001 the Institute of Medicine (IOM) released a report on the use of caffeine during sustained military operations in which recommendations for research and practice were made. This systematic review serves as an update on the current quality of the evidence and addresses gaps in the current literature surrounding the effects of caffeinated foods and beverages on cognitive functioning in healthy adult populations exposed to military-like moderators. PubMed, CINAHL, Embase, PsycInfo, and the Cochrane Library were searched. Peer-reviewed randomized controlled trials published in the English language since 1998 were eligible. Twenty-five trials were included and assessed for methodological quality, and descriptive data were extracted according to each military-like moderator identified. Moderators included sleep deprivation (n = 17), physical or mental exertion (n = 4), sleep deprivation combined with a sustained military operation (n = 3), and physical exertion combined with low ambient temperature (n = 1). The effects of caffeine supplementation on cognitive functioning in sleep-deprived subjects included improvements in attention and vigilance, complex reaction time, and problem solving and reasoning in the trials reviewed. These findings are consistent with the conclusions reached in the 2001 IOM report. This review contributes to the field by addressing gaps outlined in the IOM report. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  20. Technology review: prototyping platforms for monitoring ambient conditions.

    Science.gov (United States)

    Afolaranmi, Samuel Olaiya; Ramis Ferrer, Borja; Martinez Lastra, Jose Luis

    2018-05-08

    The monitoring of ambient conditions in indoor spaces is very essential owing to the amount of time spent indoors. Specifically, the monitoring of air quality is significant because contaminated air affects the health, comfort and productivity of occupants. This research work presents a technology review of prototyping platforms for monitoring ambient conditions in indoor spaces. It involves the research on sensors (for CO 2 , air quality and ambient conditions), IoT platforms, and novel and commercial prototyping platforms. The ultimate objective of this review is to enable the easy identification, selection and utilisation of the technologies best suited for monitoring ambient conditions in indoor spaces. Following the review, it is recommended to use metal oxide sensors, optical sensors and electrochemical sensors for IAQ monitoring (including NDIR sensors for CO 2 monitoring), Raspberry Pi for data processing, ZigBee and Wi-Fi for data communication, and ThingSpeak IoT platform for data storage, analysis and visualisation.

  1. Reprint of: Pyrolysis technologies for municipal solid waste: A review

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dezhen, E-mail: chendezhen@tongji.edu.cn [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); Yin, Lijie; Wang, Huan [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); He, Pinjing [State Key Laboratory of Pollution Control and Resource Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China)

    2015-03-15

    Highlights: • MSW pyrolysis reactors, products and environmental impacts are reviewed. • MSW pyrolysis still has to deal with flue gas emissions and products’ contamination. • Definition of standardized products is suggested to formalize MSW pyrolysis technology. • Syngas is recommended to be the target product for single MSW pyrolysis technology. - Abstract: Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO{sub 2} and NH{sub 3}, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.

  2. Pyrolysis technologies for municipal solid waste: A review

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dezhen, E-mail: chendezhen@tongji.edu.cn [Thermal and Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); Yin, Lijie; Wang, Huan [Thermal and Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); He, Pinjing [State Key Laboratory of Pollution Control and Resource Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China)

    2014-12-15

    Highlights: • MSW pyrolysis reactors, products and environmental impacts are reviewed. • MSW pyrolysis still has to deal with flue gas emissions and products’ contamination. • Definition of standardized products is suggested to formalize MSW pyrolysis technology. • Syngas is recommended to be the target product for single MSW pyrolysis technology. - Abstract: Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO{sub 2} and NH{sub 3}, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.

  3. Readiness for hospital discharge: A concept analysis.

    Science.gov (United States)

    Galvin, Eileen Catherine; Wills, Teresa; Coffey, Alice

    2017-11-01

    To report on an analysis on the concept of 'readiness for hospital discharge'. No uniform operational definition of 'readiness for hospital discharge' exists in the literature; therefore, a concept analysis is required to clarify the concept and identify an up-to-date understanding of readiness for hospital discharge. Clarity of the concept will identify all uses of the concept; provide conceptual clarity, an operational definition and direction for further research. Literature review and concept analysis. A review of literature was conducted in 2016. Databases searched were: Academic Search Complete, CINAHL Plus with Full Text, PsycARTICLES, Psychology and Behavioural Sciences Collection, PsycINFO, Social Sciences Full Text (H.W. Wilson) and SocINDEX with Full Text. No date limits were applied. Identification of the attributes, antecedents and consequences of readiness for hospital discharge led to an operational definition of the concept. The following attributes belonging to 'readiness for hospital discharge' were extracted from the literature: physical stability, adequate support, psychological ability, and adequate information and knowledge. This analysis contributes to the advancement of knowledge in the area of hospital discharge, by proposing an operational definition of readiness for hospital discharge, derived from the literature. A better understanding of the phenomenon will assist healthcare professionals to recognize, measure and implement interventions where necessary, to ensure patients are ready for hospital discharge and assist in the advancement of knowledge for all professionals involved in patient discharge from hospital. © 2017 John Wiley & Sons Ltd.

  4. Reviews on laser cutting technology for industrial applications

    Science.gov (United States)

    Muangpool, T.; Pullteap, S.

    2018-03-01

    In this paper, an overview of the laser technology applied for the industrial has been reviewed. In general, this technology was used in several engineering applications such as industrial, medical, science, research sectors, etc. Focusing on the laser technology in the industrial section, it was, normally, employed for many purposes i.e. target marking, welding, drilling, and also cutting. Consequently, the laser cutting technology was, however, divided into three classifications YAG, CO2, and fiber laser, respectively. Each laser types have different advantages and disadvantages depending on the material type. The advantages by using laser cutting compared with the general cutting machines were exploited in terms of narrow kerf, high cutting speed, low heat-affected zone (HAZ), improve efficiency of the cutting process, high accuracy, etc. However, the main objectives from the technology used were increasing of the products and also decreasing the production cost. In the opposite way, some disadvantages of the technology were summarized by complexity to operate, high maintenance cost, and also high power consumption. In Thailand industry, there were many factories used this technology as a cutting process. Unfortunately, only few researches were published. It might explains that this technology were difficulty to develop, high investment, and also easy to import from aboard. For becoming to the Thailand 4.0 community, the Thailand industry might awareness to reduce the importing machine and boosting some policies to create novel innovative / know-how from the own country.

  5. Technological Solutions for Older People with Alzheimer's Disease: Review.

    Science.gov (United States)

    Maresova, Petra; Tomsone, Signe; Lameski, Petre; Madureira, Joana; Mendes, Ana; Zdravevski, Eftim; Chorbev, Ivan; Trajkovik, Vladimir; Ellen, Moriah; Rodile, Kasper

    2018-04-27

    In the nineties, numerous studies began to highlight the problem of the increasing number of people with Alzheimer's disease in developed countries, especially in the context of demographic progress. At the same time, the 21st century is typical of the development of advanced technologies that penetrate all areas of human life. Digital devices, sensors, and intelligent applications are tools that can help seniors and allow better communication and control of their caregivers. The aim of the paper is to provide an up-to-date summary of the use of technological solutions for improving health and safety for people with Alzheimer's disease. Firstly, the problems and needs of senior citizens with Alzheimer's disease (AD) and their caregivers are specified. Secondly, a scoping review is performed regarding the technological solutions suggested to assist this specific group of patients. Works obtained from the following libraries used in this scoping review: Web of Science, PubMed, Springer, ACM and IEEE Xplore. Four independent reviewers screened the identified records and selected relevant articles which were published in the period from 2007 to 2018. A total of 6,705 publications were selected. In all, 128 full papers were screened. Results obtained from the relevant studies were furthermore divided into the following categories according to the type and use of technologies: devices, processing, and activity recognition. The leading technological solution in the category of devices are wearables and ambient non-invasive sensors. The introduction and utilization of these technologies however brings about challenges in acceptability, durability, ease of use, communication, and power requirements. Furthermore, in needs to be pointed out that these technological solutions should be based on open standards. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  6. Educational Technology: A Review of the Integration, Resources, and Effectiveness of Technology in K-12 Classrooms

    Directory of Open Access Journals (Sweden)

    Adolph Delgado

    2015-09-01

    Full Text Available There is no questioning that the way people live, interact, communicate, and conduct business is undergoing a profound, rapid change. This change is often referred to as the “digital revolution,” which is the advancement of technology from analog, electronic and mechanical tools to the digital tools available today. Moreover, technology has begun to change education, affecting how students acquire the skill sets needed to prepare for college and a career and how educators integrate digital technological instructional strategies to teach. Numerous studies have been published discussing the barriers of integrating technology, the estimated amount of investment that is needed in order to fully support educational technology, and, of course, the effectiveness of technology in the classroom. As such, this article presents a critical review of the transitions that technology integration has made over the years; the amount of resources and funding that has been allocated to immerse school with technology; and the conflicting results presented on effectiveness of using is technology in education. Through synthesis of selected themes, we found a plethora of technological instructional strategies being used to integrate technology into K-12 classrooms. Also, though there have been large investments made to integrate technology into K-12 classrooms to equip students with the skills needed to prepare for college and a career, the practical use of this investment has not been impressive. Lastly, several meta-analyses showed promising results of effectiveness of technology in the classroom. However, several inherent methodological and study design issues dampen the amount of variance that technology accounts for.

  7. Technology, applications and modelling of ohmic heating: a review.

    Science.gov (United States)

    Varghese, K Shiby; Pandey, M C; Radhakrishna, K; Bawa, A S

    2014-10-01

    Ohmic heating or Joule heating has immense potential for achieving rapid and uniform heating in foods, providing microbiologically safe and high quality foods. This review discusses the technology behind ohmic heating, the current applications and thermal modeling of the process. The success of ohmic heating depends on the rate of heat generation in the system, the electrical conductivity of the food, electrical field strength, residence time and the method by which the food flows through the system. Ohmic heating is appropriate for processing of particulate and protein rich foods. A vast amount of work is still necessary to understand food properties in order to refine system design and maximize performance of this technology in the field of packaged foods and space food product development. Various economic studies will also play an important role in understanding the overall cost and viability of commercial application of this technology in food processing. Some of the demerits of the technology are also discussed.

  8. A Review of Gamification in Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Prabawa, H. W.

    2017-02-01

    This paper review 10 papers that relating to gamification adoption in developing technological pedagogical content knowledge (TPACK) framework. Technological developments lately led to the trend of increased use of ICT in the learning process, one of which is gamification. Gamification is the concept of applying game mechanics and game design techniques to engage and motivate people to achieve their goals. Gamification in education as an intersection of learning and fun. The problem is that not all game’s attributes suitable for use in presents a teaching material. TPACK is a framework for the teacher that described a complex interaction among three bodies of knowledge : content, pedagogy and technology. TPACK engagement has an impact on the teacher mastery in dimension of teaching material content, in addition to improve teachers skill in developing technology in classroom learning.

  9. Ultra-low-head hydroelectric technology: A review

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Daqing; Deng, Zhiqun (Daniel)

    2017-10-01

    In recent years, distributed renewable energy-generation technologies, such as wind and solar, have developed rapidly. Nevertheless, the utilization of ultra-low-head (ULH) water energy (i.e., situations where the hydraulic head is less than 3 m or the water flow is more than 0.5 m/s with zero head) has received little attention. We believe that, through technological innovations and cost reductions, ULH hydropower has the potential to become an attractive, renewable, and sustainable resource. This paper investigates potential sites for ULH energy resources, the selection of relevant turbines and generators, simplification of civil works, and project costs. This review introduces the current achievements on ULH hydroelectric technology to stimulate discussions and participation of stakeholders to develop related technologies for further expanding its utilization as an important form of renewable energy.

  10. e-Learning readiness amongst nursing students at the Durban ...

    African Journals Online (AJOL)

    Marilynne Coopasami

    c Centre for Excellence in Learning and Teaching, ML Sultan Campus, Durban University of Technology, Durban ... education, technological and equipment readiness require attention before it can be ... strategy; consider the benefits and disadvantages of e- ... using an appropriate tool to measure e-Learning readiness has.

  11. Change Management in Information Technology - A Literature Review

    Directory of Open Access Journals (Sweden)

    Mahadi Hasan Miraz

    2016-03-01

    Full Text Available The purpose of this paper is to present the state of the art of research in Information Technology (IT in Change Management (CM. Initial studies indicate that investments into CM in IT often do not add the predictable value, neither to the CM division himself nor to the association supported by the CM section. A basis for further study into this complex and inter disciplinary area is therefore needed. This literature review will contribute to this basis. Based on a Systematic Literature Review (SLR method, journal articles, with a focus on CM in IT were found. Relevant articles were organized in categories according to focus on Technology, IT layer, CM process and theory, research method applied and type of findings. Finally research gaps were identified. There seems to be a general belief in technology combinations as a way to speed up the rather slow IT diffusion process in CM. It is documented that current research into CM in IT has an unbalanced focus on few specific technologies, IT layers and CM processes, and that further research should focus more on the IT implementation process and use. Knowledge from application and use could be fed back into (and strengthen conceptualization and progress, thereby adding more value to CM. Only the search engine Scopus is used. This is the first review paper focusing on CM in general in IT, giving an overview of the area and delivering a basis for further research.

  12. A review of learning rates for electricity supply technologies

    International Nuclear Information System (INIS)

    Rubin, Edward S.; Azevedo, Inês M.L.; Jaramillo, Paulina; Yeh, Sonia

    2015-01-01

    A variety of mathematical models have been proposed to characterize and quantify the dependency of electricity supply technology costs on various drivers of technological change. The most prevalent model form, called a learning curve, or experience curve, is a log-linear equation relating the unit cost of a technology to its cumulative installed capacity or electricity generated. This one-factor model is also the most common method used to represent endogenous technical change in large-scale energy-economic models that inform energy planning and policy analysis. A characteristic parameter is the “learning rate,” defined as the fractional reduction in cost for each doubling of cumulative production or capacity. In this paper, a literature review of the learning rates reported for 11 power generation technologies employing an array of fossil fuels, nuclear, and renewable energy sources is presented. The review also includes multi-factor models proposed for some energy technologies, especially two-factor models relating cost to cumulative expenditures for research and development (R&D) as well as the cumulative installed capacity or electricity production of a technology. For all technologies studied, we found substantial variability (as much as an order of magnitude) in reported learning rates across different studies. Such variability is not readily explained by systematic differences in the time intervals, geographic regions, choice of independent variable, or other parameters of each study. This uncertainty in learning rates, together with other limitations of current learning curve formulations, suggests the need for much more careful and systematic examination of the influence of how different factors and assumptions affect policy-relevant outcomes related to the future choice and cost of electricity supply and other energy technologies. - Highlights: • We review models explaining the cost of 11 electricity supply technologies. • The most prevalent model

  13. REVIEW OF ENERGY-SAVING TECHNOLOGIES IN MODERN HYDRAULIC DRIVES

    Directory of Open Access Journals (Sweden)

    Mykola Karpenko

    2017-12-01

    Full Text Available This paper focuses on review of modern energy­saving technologies in hydraulic drives. Described main areas of energy conservation in hydraulic drive (which in turn are divided into many under the directions and was established the popularity of them. Reviewed the comparative analysis of efficiency application of various strategies for energy saving in a hydraulic drive. Based on the review for further research a combined method of real­time control systems with energy­saving algorithms and regeneration unit – selected for maxing efficiency in hydraulic drive. Scientific papers (40 papers, what introduced in review, is not older than 15 years in the databases “Sciencedirect” and “Scopus”.

  14. Technology in precision viticulture: a state of the art review

    Directory of Open Access Journals (Sweden)

    Matese A

    2015-05-01

    Full Text Available Alessandro Matese,1 Salvatore Filippo Di Gennaro1,2 1Institute of Biometeorology, National Research Council (IBIMET-CNR, Florence, Italy; 2Department of Agricultural, Food and Environmental Sciences, University of Perugia, Perugia, Italy Abstract: Precision viticulture aims to maximize the oenological potential of vineyards. This is especially true in regions where the high quality standards of wine production justify the adoption of site-specific management practices to simultaneously increase both quality and yield. The introduction of new technologies for supporting vineyard management allows the efficiency and quality of production to be improved and, at the same time, reduces the environmental impact. The rapid evolution of information communication technologies and geographical science offers enormous potential for the development of optimized solutions for distributed information for precision viticulture. Recent technological developments have allowed useful tools to be elaborated that help in the monitoring and control of many aspects of vine growth. Precision viticulture thus seeks to exploit the widest range of available observations to describe the vineyard spatial variability with high resolution, and provide recommendations to improve management efficiency in terms of quality, production, and sustainability. This review presents a brief outline of state of the art of technologies in precision viticulture. It is divided in two sections, the first focusing on monitoring technologies such as geolocating and remote and proximal sensing; the second focuses on variable-rate technologies and the new agricultural robots. Keywords: remote sensing, proximal sensing, variable-rate technology, robot 

  15. Physician communication via Internet-enabled technology: A systematic review.

    Science.gov (United States)

    Barr, Neil G; Randall, Glen E; Archer, Norman P; Musson, David M

    2017-10-01

    The use of Internet-enabled technology (information and communication technology such as smartphone applications) may enrich information exchange among providers and, consequently, improve health care delivery. The purpose of this systematic review was to gain a greater understanding of the role that Internet-enabled technology plays in enhancing communication among physicians. Studies were identified through a search in three electronic platforms: the Association for Computing Machinery Digital Library, ProQuest, and Web of Science. The search identified 5140 articles; of these, 21 met all inclusion criteria. In general, physicians were satisfied with Internet-enabled technology, but consensus was lacking regarding whether Internet-enabled technology improved efficiency or made a difference to clinical decision-making. Internet-enabled technology can play an important role in enhancing communication among physicians, but the extent of that benefit is influenced by (1) the impact of Internet-enabled technology on existing work practices, (2) the availability of adequate resources, and (3) the nature of institutional elements, such as privacy legislation.

  16. THE STUDY OF INDONESIA’S READINESS TO COPE WITH DEMOGRAPHIC BONUS: A REVIEW OF POPULATION LAW

    Directory of Open Access Journals (Sweden)

    Edie Toet Hendratno

    2015-09-01

    Full Text Available The shift from a population mapping to investigate the population bonus on demographic aspect enhances the economic value this study might contribute for. Indonesian population as the fourth largest number requires some policies to cope with the millennium challenges. Improving nationwide database maintains government on-going strategy to manage its population that is expected to serve all stakeholders for any quest towards economic development. The study uses mixed method with the explanatory sequential strategy. The qualitative approach is used, using social network analysis, supported by desk study, in-depth interview, focus group discussion, and literature studies. This study attempts to provide for improvement to the extant regulations on identity card, mostly electronic-KTP. Demographic bonus is an interesting topic given that the younger the population, the higher the employment demand rate will be. Having systematic database bank and access is expected to alleviate the challenge on high population growth rate in Indonesia. Besides, recommendations are addressed to the policy maker (the Government, mostly on the review or amendment of the extant regulations that might not in line with the database systematic improvements. The study is a primary thesis from a review of population law, using multidisciplinary approach, i.e. population economics (demography, legal study, and public policy that can be used as a testing basis to answer further demographic bonus from an exploration of other scientific inquiries.

  17. The Use of Technology in Identifying Hospital Malnutrition: Scoping Review.

    Science.gov (United States)

    Trtovac, Dino; Lee, Joon

    2018-01-19

    Malnutrition is a condition most commonly arising from the inadequate consumption of nutrients necessary to maintain physiological health and is associated with the development of cardiovascular disease, osteoporosis, and sarcopenia. Malnutrition occurring in the hospital setting is caused by insufficient monitoring, identification, and assessment efforts. Furthermore, the ability of health care workers to identify and recognize malnourished patients is suboptimal. Therefore, interventions focusing on the identification and treatment of malnutrition are valuable, as they reduce the risks and rates of malnutrition within hospitals. Technology may be a particularly useful ally in identifying malnutrition due to scalability, timeliness, and effectiveness. In an effort to explore the issue, this scoping review synthesized the availability of technological tools to detect and identify hospital malnutrition. Our objective was to conduct a scoping review of the different forms of technology used in addressing malnutrition among adults admitted to hospital to (1) identify the extent of the published literature on this topic, (2) describe key findings, and (3) identify outcomes. We designed and implemented a search strategy in 3 databases (PubMed, Scopus, and CINAHL). We completed a descriptive numerical summary and analyzed study characteristics. One reviewer independently extracted data from the databases. We retrieved and reviewed a total of 21 articles. We categorized articles by the computerized tool or app type: malnutrition assessment (n=15), food intake monitoring (n=5), or both (n=1). Within those categories, we subcategorized the different technologies as either hardware (n=4), software (n=13), or both (n=4). An additional subcategory under software was cloud-based apps (n=1). Malnutrition in the acute hospital setting was largely an unrecognized problem, owing to insufficient monitoring, identification, and initial assessments of identifying both patients who are

  18. A review on photovoltaic/thermal hybrid solar technology

    International Nuclear Information System (INIS)

    Chow, T.T.

    2010-01-01

    A significant amount of research and development work on the photovoltaic/thermal (PVT) technology has been done since the 1970s. Many innovative systems and products have been put forward and their quality evaluated by academics and professionals. A range of theoretical models has been introduced and their appropriateness validated by experimental data. Important design parameters are identified. Collaborations have been underway amongst institutions or countries, helping to sort out the suitable products and systems with the best marketing potential. This article gives a review of the trend of development of the technology, in particular the advancements in recent years and the future work required. (author)

  19. CSIR Division of Mining Technology annual review 1993/94

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

  20. The controversy of sports technology: a systematic review.

    Science.gov (United States)

    Dyer, Bryce

    2015-01-01

    Changes or introductions of technology or equipment can affect how a sport is played or influence its performances. This article conducted a systematic review of peer-reviewed literature to identify any case studies of controversial events surrounding the implementation or use of sports technology. 56 articles were identified that highlighted 31 different case studies found over a three decade time period. Thematic analysis revealed six distinctive themes when reviewing the articles. Whilst the sport of golf had the highest number of case studies, it was found that a significant level of attention had been recorded in the cases of Oscar Pistorius use of prosthetic legs in athletics and the use of full length swimsuits in swimming. The trend surrounding the number of articles was shown to be initially intermittent but saw a peak period from 2008 to 2010. However, the frequency of such articles since this peak has been more consistent. It is proposed that long periods of time without intervention or resolution by a governing body often increases the peer-reviewed attention paid to such cases in examples such as those identified in this systematic review.

  1. Review of design technology of control rod position indicators

    International Nuclear Information System (INIS)

    Yu, Je Yong; Huh, Hyung; Kim, Ji Ho; Kim, Jong In; Chang, Moon Hee

    1999-10-01

    An integral reactor SMART is under development at KAERI. The design characteristics of SMART are radically different from those employer in currently operating loop type water reactors in Korea. The objective of this report is to review the design technology of position indicator, and to study the various sensors which can be used in rod position indicator. Design criteria that rod position indicator should satisfy are also examined. Following position indicators are reviewed in this report. 1. Digital positioning indicator (DRPI), 2. Reed switch type position indicator (RSPT), 3. Choke sensor type position indicator, 4. Ultrasonic sensor type position indicator, 5. Comparison of each position indicator. (author)

  2. ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

    Science.gov (United States)

    Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

    2018-06-13

    The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

  3. A systematic review of the relationship between staff perceptions of organizational readiness to change and the process of innovation adoption in substance misuse treatment programs.

    Science.gov (United States)

    Kelly, Peter; Hegarty, Josephine; Barry, Joe; Dyer, Kyle R; Horgan, Aine

    2017-09-01

    Translating innovation, such as contemporary research evidence, into policy and practice is a challenge, not just in substance misuse treatment programs, but across all spheres of healthcare. Organizational readiness to change (ORC) has been described as a fundamental concept, and an important determinant of the process of innovation adoption. The aim of this review was to describe the relationship between staff perceptions of ORC and the process of innovation adoption: exposure, adoption, implementation and integration into practice, in substance misuse treatment programs. This systematic review was conducted in accordance with PRISMA guidelines and fourteen papers were identified as being eligible for inclusion. This review was designed to include all constructs of ORC, but only one tool was used in all of the included papers. Despite this, the heterogeneity of studies in this review made a direct comparison of ORC related variables challenging. None of the included papers clearly related to one stage of the process of innovation adoption, and all of the included papers related to the early stages of the process. Only one paper attempted to measure the sustained integration of an innovation into practice. Overall, the papers were assessed as being low in terms of evidential hierarchy and the quality of the papers was assessed as being on average fair. ORC measurements provide us with a measure of organizational functioning which can be important in terms of predicting how successfully new innovations are adopted. Motivation for change was high in programs where staff identified more program deficits and these staff could also identify more specific needs, but were less likely to have exposure to new innovations. Better program resources and specific staff attributes, increase the likely hood of successful innovation adoption. A good organizational climate is potentially the strongest predictor for the adoption of new practices. It may be beneficial to measure ORC

  4. Computer technology for self-management: a scoping review.

    Science.gov (United States)

    Jacelon, Cynthia S; Gibbs, Molly A; Ridgway, John Ve

    2016-05-01

    The purpose of this scoping review of literature is to explore the types of computer-based systems used for self-management of chronic disease, the goals and success of these systems, the value added by technology integration and the target audience for these systems. Technology is changing the way health care is provided and the way that individuals manage their health. Individuals with chronic diseases are now able to use computer-based systems to self-manage their health. These systems have the ability to remind users of daily activities, and to help them recognise when symptoms are worsening and intervention is indicated. However, there are many questions about the types of systems available, the goals of these systems and the success with which individuals with chronic illness are using them. This is a scoping review in which the Cumulative Index of Nursing and Allied Health Literature, PubMed and IEEE Xplore databases were searched. A total of 303 articles were reviewed, 89 articles were read in-depth and 30 were included in the scoping review. The Substitution, Augmentation, Modification, Redefinition model was used to evaluate the value added by the technology integration. Research on technology for self-management was conducted in 13 countries. Data analysis identified five kinds of platforms on which the systems were based, some systems were focused on a specific disease management processes, others were not. For individuals to effectively use systems to maintain maximum wellness, the systems must have a strong component of self-management and provide the user with meaningful information regarding their health states. Clinicians should choose systems for their clients based on the design, components and goals of the systems. © 2016 John Wiley & Sons Ltd.

  5. A review on Anticipated Breakthrough Technologies of 21st Century

    OpenAIRE

    Aithal P. S.; Shubhrajyotsna Aithal

    2016-01-01

    This review discuss strategic management of thirteen most anticipated possible technology breakthroughs of 21st century which are substantially affect the life style of living beings in the world like (1) Nanotechnology-based human life comfort, (2) High speed computation through optical computers, (3) Embedded Intelligence, (4) HIV Antivirus, (5) Pseudo Senses - Sensation of existence through virtual reality and through artificial environment, (6) Off Planet Production in micro-gravity, (7) ...

  6. Review of advanced catheter technologies in radiation oncology brachytherapy procedures

    OpenAIRE

    Zhou J; Zamdborg L; Sebastian E

    2015-01-01

    Jun Zhou,1,2 Leonid Zamdborg,1 Evelyn Sebastian1 1Department of Radiation Oncology, Beaumont Health System, 2Oakland University William Beaumont School of Medicine, Royal Oak, MI, USA Abstract: The development of new catheter and applicator technologies in recent years has significantly improved treatment accuracy, efficiency, and outcomes in brachytherapy. In this paper, we review these advances, focusing on the performance of catheter imaging and reconstruction techniques in brachytherapy ...

  7. A review of fusion breeder blanket technology, part 1

    International Nuclear Information System (INIS)

    Jackson, D.P.; Selander, W.N.; Townes, B.M.

    1985-01-01

    This report presents the results of a study of fusion breeder blanket technology. It reviews the role of the breeder blanket, the current understanding of the scientific and engineering bases of liquid metal and solid breeder blankets and the programs now underway internationally to resolve the uncertainities in current knowledge. In view of existing national expertise and experience, a solid breeder R and D program for Canada is recommended

  8. WHAT ARE USER PERSPECTIVES OF EXOSKELETON TECHNOLOGY? A LITERATURE REVIEW.

    Science.gov (United States)

    Hill, Deborah; Holloway, Catherine Sarah; Morgado Ramirez, Dafne Zuleima; Smitham, Peter; Pappas, Yannis

    2017-01-01

    Exoskeletons are electromechanical devices that are worn by a human operator to increase their physical performance. Several exoskeletons have been developed to restore functional movements, such as walking, for those with paralysis due to neurological impairment. However, existing exoskeletons have limitations with respect to affordability, size, weight, speed, and efficiency, which may reduce their functional application. Therefore, the aim of this scoping review is to collect and narratively synthesize the perspectives of users of exoskeleton technology. A systematic literature search was conducted across several healthcare related online databases. A total of 4,619 articles were identified, of which 51 were selected for full review. Only three studies were identified that met the inclusion criteria. Of these, one showed an incongruence between users' expectations and experiences of device use; another reported perspectives on potential rather than actual device use, ranking design features in order of perceived importance; and the other reported ratings of ease of device use in training. The heterogeneity of studies included within this review, leave the authors unable to suggest consensus as to user perspectives of exoskeleton technology. However, it is apparent that users are able to suggest priorities for exoskeleton design and that users' perspectives of exoskeleton technology might change in response to experience of use. The authors, therefore, suggest that exoskeleton design should be an iterative process, whereby user perspectives are sought, incorporated and refined by tangible experience, to ensure that devices developed are acceptable to and usable by the populations they seek to re-enable.

  9. Advances in poultry litter disposal technology--a review.

    Science.gov (United States)

    Kelleher, B P; Leahy, J J; Henihan, A M; O'Dwyer, T F; Sutton, D; Leahy, M J

    2002-05-01

    The land disposal of waste from the poultry industry and subsequent environmental implications has stimulated interest into cleaner and more useful disposal options. The review presented here details advances in the three main alternative disposal routes for poultry litter, specifically in the last decade. Results of experimental investigations into the optimisation of composting, anaerobic digestion and direct combustion are summarised. These technologies open up increased opportunities to market the energy and nutrients in poultry litter to agricultural and non-agricultural uses. Common problems experienced by the current technologies are the existence and fate of nitrogen as ammonia, pH and temperature levels, moisture content and the economics of alternative disposal methods. Further advancement of these technologies is currently receiving increased interest, both academically and commercially. However, significant financial incentives are required to attract the agricultural industry.

  10. Science and Technology Review April/May 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2011-03-03

    At Lawrence Livermore National Laboratory, the focus is on science and technology research to ensure the nation's security. That expertise is also applied to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight time a year to communicate, to a broad audience, the Laboratory's scientific and technological accomplishments in fulfilling its primary missions. The publication's goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for April/May 2011, the features are 'Dealing with the Nonlinear Battlefield' and 'From Video to Knowledge.' Research highlights are 'Kinetic Models Predict Biofuel Efficiency,' Going Deep with MEGa-Rays' and 'Energy on Demand.'

  11. Nuclear explosives testing readiness evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Valk, T.C.

    1993-09-01

    This readiness evaluation considers hole selection and characterization, verification, containment issues, nuclear explosive safety studies, test authorities, event operations planning, canister-rack preparation, site preparation, diagnostic equipment setup, device assembly facilities and processes, device delivery and insertion, emplacement, stemming, control room activities, readiness briefing, arming and firing, test execution, emergency response and reentry, and post event analysis to include device diagnostics, nuclear chemistry, and containment. This survey concludes that the LLNL program and its supporting contractors could execute an event within six months of notification, and a second event within the following six months, given the NET group`s evaluation and the following three restraints: (1) FY94 (and subsequent year) funding is essentially constant with FY93, (2) Preliminary work for the initial event is completed to the historical sic months status, (3) Critical personnel, currently working in dual use technologies, would be recallable as needed.

  12. Application of radiation technology to sewage sludge processing: A review

    International Nuclear Information System (INIS)

    Wang Jianlong; Wang Jiazhuo

    2007-01-01

    Sewage sludge is unwanted residual solid wastes generated in wastewater treatment and its management is one of the most critical environmental issues of today. The treatment and disposal of sludge contribute a considerable proportion of the cost for running a wastewater treatment plant. The increasing amount of swage sludge and more and more legislative regulation of its disposal have stimulated the need for developing new technologies to process sewage sludge efficiently and economically. One ideal consideration is to recycle it after proper treatment. Radiation technology is regarded to be a promising alternative for its high efficiency in pathogen inactivation, organic pollutants oxidation, odor nuisance elimination and some other characteristics enhancement, which will facilitate the down-stream process of sludge treatment and disposal. Here we present a brief review of application of radiation technology on sewage sludge processing. Some basic information of two currently available irradiation systems and fundamental radiation chemistry are introduced firstly; then the world-wide application of this promising technology is reviewed; various effects of radiation on sludge is discussed in detail; and some concluding remarks are given and some future directions are also proposed

  13. Counselling users of hearing technology: a comprehensive literature review.

    Science.gov (United States)

    Meibos, Alex; Muñoz, Karen; Schultz, Jared; Price, Tanner; Whicker, John J; Caballero, Ana; Graham, Laurel

    2017-12-01

    The purpose of this review is to determine the scope of peer-reviewed empirical research related to counselling in audiology with patients using hearing technology and to identify limitations and gaps to guide recommendations for future research. A rapid evidence assessment was used to identify relevant articles for the review. Eighteen articles met the inclusion criteria. Three themes were identified: (1) audiologist counselling perspectives, (2) counselling communication trends in practice and (3) audiologist experiences with professional training and reported patient outcomes. Findings revealed audiologists are more confident providing information than counselling that addresses adjustment aspects, and other communication gaps have been observed. There is limited research related to counselling in audiology. Audiologists continue to report a need for more training in counselling in their graduate programmes. Additional research is needed to determine effective ways to implement counselling in practice and to improve graduate student supervision for the development of counselling competencies and confidence in using skills in practice.

  14. Is clinical virtual reality ready for primetime?

    Science.gov (United States)

    Rizzo, Albert Skip; Koenig, Sebastian Thomas

    2017-11-01

    Since the mid-1990s, a significant scientific literature has evolved regarding the outcomes from the use of what we now refer to as clinical virtual reality (VR). This use of VR simulation technology has produced encouraging results when applied to address cognitive, psychological, motor, and functional impairments across a wide range of clinical health conditions. This article addresses the question, "Is clinical VR ready for primetime?" After a brief description of the various forms of VR technology, we discuss the trajectory of clinical VR over the last 20 years and summarize the basic assets that VR offers for creating clinical applications. The discussion then addresses the question of readiness in terms of the theoretical basis for clinical VR assets, the research to date, the pragmatic factors regarding availability, usability, and costs of clinical VR content/systems, and the ethical issues for the safe use of VR with clinical populations. Our review of the theoretical underpinnings and research findings to date leads to the prediction that clinical VR will have a significant impact on future research and practice. Pragmatic issues that can influence adoption across many areas of psychology also appear favorable, but professional guidelines will be needed to promote its safe and ethical use. Although there is still much research needed to advance the science in this area, we strongly believe that clinical VR applications will become indispensable tools in the toolbox of psychological researchers and practitioners and will only grow in relevance and popularity in the future. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  15. A review of emerging technologies for food refrigeration applications

    International Nuclear Information System (INIS)

    Tassou, S.A.; Lewis, J.S.; Ge, Y.T.; Hadawey, A.; Chaer, I.

    2010-01-01

    Refrigeration has become an essential part of the food chain. It is used in all stages of the chain, from food processing, to distribution, retail and final consumption in the home. The food industry employs both chilling and freezing processes where the food is cooled from ambient to temperatures above 0 deg. C in the former and between -18 deg. C and -35 deg. C in the latter to slow the physical, microbiological and chemical activities that cause deterioration in foods. In these processes mechanical refrigeration technologies are invariably employed that contribute significantly to the environmental impacts of the food sector both through direct and indirect greenhouse gas emissions. To reduce these emissions, research and development worldwide is aimed at both improving the performance of conventional systems and the development of new refrigeration technologies of potentially much lower environmental impacts. This paper provides a brief review of both current state of the art technologies and emerging refrigeration technologies that have the potential to reduce the environmental impacts of refrigeration in the food industry. The paper also highlights research and development needs to accelerate the development and adoption of these technologies by the food sector.

  16. Fighting Child Pornography: A Review of Legal and Technological Developments

    Directory of Open Access Journals (Sweden)

    Jasmine Eggestein

    2014-12-01

    Full Text Available In our digitally connected world, the law is arguably behind the technological developments of the Internet age.  While this causes many issues for law enforcement, it is of particular concern in the area of child pornography in the United States.  With the wide availability of technologies such as digital cameras, peer-to-peer file sharing, strong encryption, Internet anonymizers and cloud computing, the creation and distribution of child pornography has become more widespread. Simultaneously, fighting the growth of this crime has become more difficult.  This paper explores the development of both the legal and technological environments surrounding digital child pornography.  In doing so, we cover the complications that court decisions have given law enforcement who are trying to investigate and prosecute child pornographers.  We then provide a review of the technologies used in this crime and the forensic challenges that cloud computing creates for law enforcement.  We note that both legal and technological developments since the 1990s seem to be working to the advantage of users and sellers of child pornography.  Before concluding, we provide a discussion and offer observations regarding this subject.

  17. Intraoral Scanner Technologies: A Review to Make a Successful Impression

    Directory of Open Access Journals (Sweden)

    Raphaël Richert

    2017-01-01

    Full Text Available To overcome difficulties associated with conventional techniques, impressions with IOS (intraoral scanner and CAD/CAM (computer-aided design and manufacturing technologies were developed for dental practice. The last decade has seen an increasing number of optical IOS devices, and these are based on different technologies; the choice of which may impact on clinical use. To allow informed choice before purchasing or renewing an IOS, this article summarizes first the technologies currently used (light projection, distance object determination, and reconstruction. In the second section, the clinical considerations of each strategy such as handling, learning curve, powdering, scanning paths, tracking, and mesh quality are discussed. The last section is dedicated to the accuracy of files and of the intermaxillary relationship registered with IOS as the rendering of files in the graphical user interface is often misleading. This overview leads to the conclusion that the current IOS is adapted for a common practice, although differences exist between the technologies employed. An important aspect highlighted in this review is the reduction in the volume of hardware which has led to an increase in the importance of software-based technologies.

  18. Effect of Hurdle Technology in Food Preservation: A Review.

    Science.gov (United States)

    Singh, Shiv; Shalini, Rachana

    2016-01-01

    Hurdle technology is used in industrialized as well as in developing countries for the gentle but effective preservation of foods. Hurdle technology was developed several years ago as a new concept for the production of safe, stable, nutritious, tasty, and economical foods. Previously hurdle technology, i.e., a combination of preservation methods, was used empirically without much knowledge of the governing principles. The intelligent application of hurdle technology has become more prevalent now, because the principles of major preservative factors for foods (e.g., temperature, pH, aw, Eh, competitive flora), and their interactions, became better known. Recently, the influence of food preservation methods on the physiology and behavior of microorganisms in foods, i.e. their homeostasis, metabolic exhaustion, stress reactions, are taken into account, and the novel concept of multi-target food preservation emerged. The present contribution reviews the concept of the potential hurdles for foods, the hurdle effect, and the hurdle technology for the prospects of the future goal of a multi-target preservation of foods.

  19. Wearable technology for spine movement assessment: A systematic review.

    Science.gov (United States)

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H

    2017-11-07

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies to assess the spine in adults performing dynamic movements. Two reviewers independently identified relevant papers. Customised data extraction and quality appraisal form were developed to extrapolate key details and identify risk of biases of each study. Twenty-two articles were retrieved that met the inclusion criteria: 12 were deemed of medium quality (score 33.4-66.7%), and 10 of high quality (score >66.8%). The majority of articles (19/22) reported validation type studies. Only 6 reported data collection in real-life environments. Multiple sensors type were used: electrogoniometers (3/22), strain gauges based sensors (3/22), textile piezoresistive sensor (1/22) and accelerometers often used with gyroscopes and magnetometers (15/22). Two sensors units were mainly used and placing was commonly reported on the spine lumbar and sacral regions. The sensors were often wired to data transmitter/logger resulting in cumbersome systems. Outcomes were mostly reported relative to the lumbar segment and in the sagittal plane, including angles, range of motion, angular velocity, joint moments and forces. This review demonstrates the applicability of wearable technology to assess the spine, although this technique is still at an early stage of development. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Bioprinting: an assessment based on manufacturing readiness levels.

    Science.gov (United States)

    Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

    2017-05-01

    Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

  1. A Critical Review on the Concept of Social Technology

    Directory of Open Access Journals (Sweden)

    Bettina Leibetseder

    2013-08-01

    Full Text Available Purpose—A critical analysis of the term social technology from a social science point of view.Design/Methodology/Approach—Review of the term “social technology” from a social science point of perspective in connection to the study of governmentality and power in a Foucauldian way.Findings—The article covers the perspective that social technology provides social science knowledge for a purpose. Such a notion allows an in depth debate about the meaning of social order in modern societies. Establishing distinctive techniques now forms the basis of the modern state and governance. Social technology forms the basis of governmental decisions; it allows for a use of social theories and methods for a purpose in politics and introduces a specific conception of power between the individual and public powers. Therefore, it alters government in three ways: It provides expert power to define solutions for social problems based on social science knowledge. It transforms government. Social technology exemplifies a support system for an ordered method of the way of government, it allows for the conduct of others and self based on scientific expertise. It can define new areas of problems in need of a change of government.Research limitations/implications—Consequently, social technology requests a critical analysis using a governmental approach. Such an approach focuses on problems on the governed subject and how governing works and why it has evolved in that way towards the subject and what kind of ideas and thinking lies within the discourse.Research type—general review.

  2. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  3. Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review

    Science.gov (United States)

    Farahani, Hamid; Wagiran, Rahman; Hamidon, Mohd Nizar

    2014-01-01

    Humidity measurement is one of the most significant issues in various areas of applications such as instrumentation, automated systems, agriculture, climatology and GIS. Numerous sorts of humidity sensors fabricated and developed for industrial and laboratory applications are reviewed and presented in this article. The survey frequently concentrates on the RH sensors based upon their organic and inorganic functional materials, e.g., porous ceramics (semiconductors), polymers, ceramic/polymer and electrolytes, as well as conduction mechanism and fabrication technologies. A significant aim of this review is to provide a distinct categorization pursuant to state of the art humidity sensor types, principles of work, sensing substances, transduction mechanisms, and production technologies. Furthermore, performance characteristics of the different humidity sensors such as electrical and statistical data will be detailed and gives an added value to the report. By comparison of overall prospects of the sensors it was revealed that there are still drawbacks as to efficiency of sensing elements and conduction values. The flexibility offered by thick film and thin film processes either in the preparation of materials or in the choice of shape and size of the sensor structure provides advantages over other technologies. These ceramic sensors show faster response than other types. PMID:24784036

  4. Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review

    Directory of Open Access Journals (Sweden)

    Hamid Farahani

    2014-04-01

    Full Text Available Humidity measurement is one of the most significant issues in various areas of applications such as instrumentation, automated systems, agriculture, climatology and GIS. Numerous sorts of humidity sensors fabricated and developed for industrial and laboratory applications are reviewed and presented in this article. The survey frequently concentrates on the RH sensors based upon their organic and inorganic functional materials, e.g., porous ceramics (semiconductors, polymers, ceramic/polymer and electrolytes, as well as conduction mechanism and fabrication technologies. A significant aim of this review is to provide a distinct categorization pursuant to state of the art humidity sensor types, principles of work, sensing substances, transduction mechanisms, and production technologies. Furthermore, performance characteristics of the different humidity sensors such as electrical and statistical data will be detailed and gives an added value to the report. By comparison of overall prospects of the sensors it was revealed that there are still drawbacks as to efficiency of sensing elements and conduction values. The flexibility offered by thick film and thin film processes either in the preparation of materials or in the choice of shape and size of the sensor structure provides advantages over other technologies. These ceramic sensors show faster response than other types.

  5. Technological factors affecting biogenic amine content in foods: a review

    Directory of Open Access Journals (Sweden)

    Fausto Gardini

    2016-08-01

    Full Text Available Biogenic amines (BAs are molecules which can be present in foods and, due to their toxicity, can cause adverse effects on the consumers. BAs are generally produced by microbial decarboxylation of amino acids in food products. The most significant BAs occurring in foods are histamine, tyramine, putrescine, cadaverine, tryptamine, 2-phenylethylamine, spermine, spermidine and agmatine. The importance of preventing the excessive accumulation of BAs in food is related to their impact on human health and food quality. Quality criteria in connection with the presence of BAs in food and food products are necessary from a toxicological point of view. This is particularly important in fermented foods in which the massive microbial proliferation required for obtaining specific products is often relater with BA accumulation. In this review, up-to-date information and recent discoveries about technological factors affecting biogenic amine content in foods are reviewed. Specifically, BA forming-microorganism and decarboxylation activity, genetic and metabolic organization of decarboxylases, risk associated to BAs (histamine, tyramine toxicity and other BAs, environmental factors influencing BA formation (temperature, salt concentration, pH. In addition, the technological factors for controlling BA production (use of starter culture, technological additives, effects of packaging, other non-thermal treatments, metabolising BA by microorganisms, effects of pressure treatments on BA formation and antimicrobial substances are addressed.

  6. A review on the process technology for Mo-99 production

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

  7. Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

    International Nuclear Information System (INIS)

    Honeyman, J.O.

    1998-01-01

    This Management Assessment of Tank Waste Remediation System (TWRS) Contractor Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations, work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on-line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined

  8. Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

    International Nuclear Information System (INIS)

    Certa, P.J.

    1998-01-01

    Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations, work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined

  9. A review of waste heat recovery technologies for maritime applications

    International Nuclear Information System (INIS)

    Singh, Dig Vijay; Pedersen, Eilif

    2016-01-01

    Highlights: • Major waste heat sources available on ships have been reviewed. • A review of suitable waste heat recovery systems was conducted for marine vessels. • Technologies have been compared for their potential and suitability for marine use. • Kalina cycle offers the highest potential for marine waste heat recovery. • Turbo compound system most suitable for recovering diesel exhaust pressure energy. - Abstract: A waste heat recovery system produces power by utilizing the heat energy lost to the surroundings from thermal processes, at no additional fuel input. For marine vessels, about 50 percent of the total fuel energy supplied to diesel power-plant aboard is lost to the surroundings. While the total amount of wasted energy is considerable, the quality of this energy is quite low due to its low temperature and has limited potential for power production. Effective waste heat recovery systems use the available low temperature waste heat to produce mechanical/electrical power with high efficiency value. In this study a review of different waste heat recovery systems has been conducted, to lay out the potential recovery efficiencies and suitability for marine applications. This work helps in identifying the most suitable heat recovery technologies for maritime use depending on the properties of shipboard waste heat and achievable recovery efficiencies, whilst discussing the features of each type of system.

  10. Review of early assessment models of innovative medical technologies.

    Science.gov (United States)

    Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

    2017-08-01

    Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  11. Advances in CO2 capture technology: A patent review

    International Nuclear Information System (INIS)

    Li, Bingyun; Duan, Yuhua; Luebke, David; Morreale, Bryan

    2013-01-01

    Highlights: ► Timely updates on carbon capture technologies: More than 1000 patents on solvent, sorbent, and membrane. ► More patents on solvent and sorbent compared to membrane. ► Environmental and health concerns exist regarding carbon capture technologies. -- Abstract: Carbon dioxide (CO 2 ) emissions are believed to be a major contributor to global warming. As a consequence, large anthropogenic CO 2 sources worldwide will eventually be required to implement CO 2 capture and storage technologies to control CO 2 emissions. In order to guide the establishment of policies for CO 2 removal, we reviewed the current status of CO 2 capture patents and technologies based on the Espacenet patent database and found that more than 1000 patents have been published on sorbent, solvent, and membrane. More than 60% of these patents were published since the year 2000, and a sharp increase in patent numbers was seen in the last several years; ∼25% patents were published in the last 2 years. Substantially more patents on CO 2 removal and separation technologies are expected in the coming years. Meanwhile, the top four major types of patents, which consist of more than 2/3 of these patents, were patents granted by Japan (JP), United States (US), World Intellectual Property Organization (WO), and China (CN), and approximately half of the patents were JP and US patents. Unfortunately, no current technologies for removing CO 2 from large sources like coal-based power plants exist which satisfy the needs of safety, efficiency, and economy; further enhancement and innovation are much needed.

  12. Separators - Technology review: Ceramic based separators for secondary batteries

    Energy Technology Data Exchange (ETDEWEB)

    Nestler, Tina; Schmid, Robert; Münchgesang, Wolfram; Bazhenov, Vasilii; Meyer, Dirk C. [Technische Universität Bergakademie Freiberg, Institut für Experimentelle Physik, Leipziger Str. 23, 09596 Freiberg (Germany); Schilm, Jochen [Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Winterbergstraße 28, 01277 Dresden (Germany); Leisegang, Tilmann [Fraunhofer-Technologiezentrum Halbleitermaterialien THM, Am St.-Niclas-Schacht 13, 09599 Freiberg (Germany)

    2014-06-16

    Besides a continuous increase of the worldwide use of electricity, the electric energy storage technology market is a growing sector. At the latest since the German energy transition ('Energiewende') was announced, technological solutions for the storage of renewable energy have been intensively studied. Storage technologies in various forms are commercially available. A widespread technology is the electrochemical cell. Here the cost per kWh, e. g. determined by energy density, production process and cycle life, is of main interest. Commonly, an electrochemical cell consists of an anode and a cathode that are separated by an ion permeable or ion conductive membrane - the separator - as one of the main components. Many applications use polymeric separators whose pores are filled with liquid electrolyte, providing high power densities. However, problems arise from different failure mechanisms during cell operation, which can affect the integrity and functionality of these separators. In the case of excessive heating or mechanical damage, the polymeric separators become an incalculable security risk. Furthermore, the growth of metallic dendrites between the electrodes leads to unwanted short circuits. In order to minimize these risks, temperature stable and non-flammable ceramic particles can be added, forming so-called composite separators. Full ceramic separators, in turn, are currently commercially used only for high-temperature operation systems, due to their comparably low ion conductivity at room temperature. However, as security and lifetime demands increase, these materials turn into focus also for future room temperature applications. Hence, growing research effort is being spent on the improvement of the ion conductivity of these ceramic solid electrolyte materials, acting as separator and electrolyte at the same time. Starting with a short overview of available separator technologies and the separator market, this review focuses on ceramic

  13. Separators - Technology review: Ceramic based separators for secondary batteries

    Science.gov (United States)

    Nestler, Tina; Schmid, Robert; Münchgesang, Wolfram; Bazhenov, Vasilii; Schilm, Jochen; Leisegang, Tilmann; Meyer, Dirk C.

    2014-06-01

    Besides a continuous increase of the worldwide use of electricity, the electric energy storage technology market is a growing sector. At the latest since the German energy transition ("Energiewende") was announced, technological solutions for the storage of renewable energy have been intensively studied. Storage technologies in various forms are commercially available. A widespread technology is the electrochemical cell. Here the cost per kWh, e. g. determined by energy density, production process and cycle life, is of main interest. Commonly, an electrochemical cell consists of an anode and a cathode that are separated by an ion permeable or ion conductive membrane - the separator - as one of the main components. Many applications use polymeric separators whose pores are filled with liquid electrolyte, providing high power densities. However, problems arise from different failure mechanisms during cell operation, which can affect the integrity and functionality of these separators. In the case of excessive heating or mechanical damage, the polymeric separators become an incalculable security risk. Furthermore, the growth of metallic dendrites between the electrodes leads to unwanted short circuits. In order to minimize these risks, temperature stable and non-flammable ceramic particles can be added, forming so-called composite separators. Full ceramic separators, in turn, are currently commercially used only for high-temperature operation systems, due to their comparably low ion conductivity at room temperature. However, as security and lifetime demands increase, these materials turn into focus also for future room temperature applications. Hence, growing research effort is being spent on the improvement of the ion conductivity of these ceramic solid electrolyte materials, acting as separator and electrolyte at the same time. Starting with a short overview of available separator technologies and the separator market, this review focuses on ceramic-based separators

  14. A Systematic Review of Reviews Evaluating Technology-Enabled Diabetes Self-Management Education and Support.

    Science.gov (United States)

    Greenwood, Deborah A; Gee, Perry M; Fatkin, Kathy J; Peeples, Malinda

    2017-09-01

    Since the introduction of mobile phones, technology has been increasingly used to enable diabetes self-management education and support. This timely systematic review summarizes how currently available technology impacts outcomes for people living with diabetes. A systematic review of high quality review articles and meta analyses focused on utilizing technology in diabetes self-management education and support services was conducted. Articles were included if published between January 2013 and January 2017. Twenty-five studies were included for analysis. The majority evaluated the use of mobile phones and secure messaging. Most studies described healthy eating, being active and metabolic monitoring as the predominant self-care behaviors evaluated. Eighteen of 25 reviews reported significant reduction in A1c as an outcome measure. Four key elements emerged as essential for improved A1c: (1) communication, (2) patient-generated health data, (3) education, and (4) feedback. Technology-enabled diabetes self-management solutions significantly improve A1c. The most effective interventions incorporated all the components of a technology-enabled self-management feedback loop that connected people with diabetes and their health care team using 2-way communication, analyzed patient-generated health data, tailored education, and individualized feedback. The evidence from this systematic review indicates that organizations, policy makers and payers should consider integrating these solutions in the design of diabetes self-management education and support services for population health and value-based care models. With the widespread adoption of mobile phones, digital health solutions that incorporate evidence-based, behaviorally designed interventions can improve the reach and access to diabetes self-management education and ongoing support.

  15. Functional and technological properties of camel milk proteins: a review

    DEFF Research Database (Denmark)

    Hailu, Yonas; Hansen, Egon Bech; Seifu, Eyassu

    2016-01-01

    This review summarises current knowledge on camel milk proteins, with focus on significant peculiarities in protein composition and molecular properties. Camel milk is traditionally consumed as a fresh or naturally fermented product. Within the last couple of years, an increasing quantity is being...... processed in dairy plants, and a number of consumer products have been marketed. A better understanding of the technological and functional properties, as required for product improvement, has been gained in the past years. Absence of the whey protein β-LG and a low proportion of к-casein cause differences...... in relation to dairy processing. In addition to the technological properties, there are also implications for human nutrition and camel milk proteins are of interest for applications in infant foods, for food preservation and in functional foods. Proposed health benefits include inhibition of the angiotensin...

  16. Use of distributed ledger technology by central banks: A review

    Directory of Open Access Journals (Sweden)

    César del Río

    2017-12-01

    Full Text Available This paper reviews what stage the central banks of the world’s leading economies are at in their study and adoption of distributed ledger technology (DLT to reengineer their various systems and functions. A brief description of DLT will be given, followed by an analysis of central banks’ publications and pronouncements to determine what each central bank is doing on their journey to DLT adoption. It was found that of the central banks for which information was available, all of them have expressed interest in DLT and have evaluated it to some extent. Nevertheless, no central bank has an operational DLT-based system at this point. This is because some issues remain regarding the speed, cost of processing, security, transparency and privacy, legal settlement finality, scalability and network effects of the technology. As DLT matures, the expectation is that these issues will begin to be resolved.

  17. Technological Advances in Stent Therapies: a Year in Review.

    Science.gov (United States)

    Raffoul, Jad; Nasir, Ammar; Klein, Andrew J P

    2018-04-07

    Stent technology has rapidly evolved since the first stainless steel bare metal stents with substantial developments in scaffolding, polymer, drug choice, drug delivery, and elution mechanisms. Most recently, there has been the evolution of bioabsorbable vascular scaffolds, potentially eliminating the need for long-term foreign object retention. These rapid developments have led to an ever-expanding selection of new stents, making the choice of which to use in which patient challenging. Operators must balance potential short- and long-term clinical ramifications, namely stent thrombosis, in-stent restenosis, target lesion revascularization, and target lesion failure. In this review, we hope to provide insight for interventional cardiologists on the details of stent technology and how this impacts outcomes, stent selection, and duration of dual-antiplatelet therapy duration post drug-eluting stent implantation.

  18. Review of research on sonar imaging technology in China

    Science.gov (United States)

    Guo, Haitao; Li, Renping; Xu, Feng; Liu, Liyuan

    2013-11-01

    Over the past 20 years, sonar imaging technology particularly for the high-technology sector has been a focus of research, in which many developed countries, especially those with coast lines, have been competing with each other. It has seen a rapid development with increasing widespread applications that has played an important and irreplaceable role in underwater exploration with great prospects for social, economic, scientific, and military benefits. The fundamental techniques underlying sonar imaging, including multi-beamforming, synthetic-aperture and inverse synthetic-aperture sonar, acoustic lensing, and acoustical holography, are described in this paper. This is followed by a comprehensive and systematic review on the advantages and disadvantages of these imaging techniques, applicability conditions, development trends, new ideas, new methods, and improvements in old methods over recent years with an emphasis on the situation in China, along with a bold and constructive prediction to some development characteristics of sonar imaging technology in the near future in China. The perspectives presented in this paper are offered with the idea of providing some degree of guidance and promotion of research on sonar imaging technology.

  19. A Review of Technology-Assisted Interventions for Diabetes Prevention.

    Science.gov (United States)

    Grock, Shira; Ku, Jeong-Hee; Kim, Julie; Moin, Tannaz

    2017-09-23

    The high prevalence of prediabetes and success of the diabetes prevention program (DPP) has led to increasing efforts to provide readily accessible, cost-effective DPP interventions to the general public. Technology-assisted DPP interventions are of particular interest since they may be easier to widely distribute and sustain as compared to traditional in-person DPP. The purpose of this article is to provide an overview of currently available technology-assisted DPP interventions. This review focuses on studies that have examined the use of mobile phone text messaging, smartphone/web-based apps, and telehealth programs to help prevent or delay the onset of incident type 2 diabetes. While there is variability in the results of studies focused on technology-assisted DPP and weight loss interventions, there is evidence to suggest that these programs have been associated with clinically meaningful weight loss and can be cost-effective. Patients who are at risk for diabetes can be offered technology-assisted DPP and weight loss interventions to lower their risk of incident diabetes. Further research should determine what specific combination of intervention features would be most successful.

  20. Mobile Technology in Undergraduate Nursing Education: A Systematic Review.

    Science.gov (United States)

    Lee, Hyejung; Min, Haeyoung; Oh, Su-Mi; Shim, Kaka

    2018-04-01

    This study aimed to identify and systematically review the literature on the use of mobile technology in nursing education. The research findings could evidence the effectiveness of mobile technology in undergraduate nursing students' learning outcomes. Computerized searches were conducted using the Ovid-MEDLINE, Ovid-EMBASE, Cochrane Library, and CINAHL databases for relevant primary studies and limited to those between 2000 and February 2018. Only randomized controlled trials (RCTs) and quasi-experimental studies published in either English or Korean were included and critically appraised using Joanna Briggs Institute tools. Seven RCTs and 7 quasi-experimental studies were identified. The mobile device and intervention applied varied throughout all the studies. Studies published earlier in the 2000s found that immediate access to clinical and pharmacological referencing information through the mobile device increased students' efficacy in clinical practice. Later studies, which were mostly conducted in Korea, reported that smartphone-based applications could promote nursing students' learning motivation and satisfaction but not their clinical skills and knowledge. We still seem to be in the beginning stage of implementing mobile technology in nursing education due to the limited implication of mobile technology and inconsistent research conclusions. In the future, rigorous primary empirical studies are needed to suggest the effective use of mobile devices in nursing education.

  1. Seizure reporting technologies for epilepsy treatment: A review of clinical information needs and supporting technologies.

    Science.gov (United States)

    Bidwell, Jonathan; Khuwatsamrit, Thanin; Askew, Brittain; Ehrenberg, Joshua Andrew; Helmers, Sandra

    2015-11-01

    This review surveys current seizure detection and classification technologies as they relate to aiding clinical decision-making during epilepsy treatment. Interviews and data collected from neurologists and a literature review highlighted a strong need for better distinguishing between patients exhibiting generalized and partial seizure types as well as achieving more accurate seizure counts. This information is critical for enabling neurologists to select the correct class of antiepileptic drugs (AED) for their patients and evaluating AED efficiency during long-term treatment. In our questionnaire, 100% of neurologists reported they would like to have video from patients prior to selecting an AED during an initial consultation. Presently, only 30% have access to video. In our technology review we identified that only a subset of available technologies surpassed patient self-reporting performance due to high false positive rates. Inertial seizure detection devices coupled with video capture for recording seizures at night could stand to address collecting seizure counts that are more accurate than current patient self-reporting during day and night time use. Copyright © 2015. Published by Elsevier Ltd.

  2. Review of equipment aging theory and technology. Final report

    International Nuclear Information System (INIS)

    Carfagno, S.P.; Gibson, R.J.

    1980-09-01

    The theory and technology of equipment aging is reviewed, particularly as they relate to the qualification of safety-system equipment for nuclear power generating stations. A fundamental degradation model is developed, and its relation to more restricted models (e.g., Arrhenius and inverse-stress models) is shown. The most common theoretical and empirical models of aging are introduced, and limitations on their practical application are analyzed. Reliability theory and its application to the acceleration of aging are also discussed. A compendium of aging data for materials and components, including degradation mechanisms, failure modes and activation energies, is included

  3. A Review of Tribomaterial Technology for Space Nuclear Power Systems

    Science.gov (United States)

    Stanford, Malcolm K.

    2007-01-01

    The National Aeronautics and Space Administration (NASA) has recently proposed a nuclear closed-cycle electric power conversion system for generation of 100-kW of electrical power for space exploration missions. A critical issue is the tribological performance of sliding components within the power conversion unit that will be exposed to neutron radiation. This paper presents a review of the main considerations that have been made in the selection of solid lubricants for similar applications in the past as well as a recommendations for continuing development of the technology.

  4. Review of recent developments in uranium extraction technology

    International Nuclear Information System (INIS)

    Alfredson, P.G.; Crawford, R.E.; Ring, R.J.

    1978-12-01

    Developments in uranium ore processing technology since the AAEC Symposium on Uranium Processing in July 1972 are reviewed. The main developments include the use of autogenous or semi-autogenous grinding, beneficiation techniques such as radiometric sorting, flotation, magnetic and gravity seperation, strong acid and ferric bacterial leaching processes, solution mining and heap leaching operations, horizontal belt filters for solid-liquid separation, continuous ion exchange processes for use with solutions containing up to 8 wt % solids, hydrogen peroxide and ammonia for the precipitation of uranium to improve product yield and purity, and the recovery of by-product uranium from the manufacture of phosphoric acid and copper processing operations

  5. 1990 DOE/SANDIA crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, D.S. (ed.)

    1990-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia's Photovoltaic Cell Research Division and Photovoltaic Technology Division. It contains information supplied by each organization making a presentation at the meeting, which was held August 7 through 9, 1990 at the Sheraton Hotel in Albuquerque, New Mexico. Sessions were held to discuss national photovoltaic programs, one-sun crystalline silicon cell research, concentrator silicon cell research, concentrator 3-5 cell research, and concentrating collector development.

  6. Review of equipment aging theory and technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Carfagno, S.P.; Gibson, R.J.

    1980-09-01

    The theory and technology of equipment aging is reviewed, particularly as they relate to the qualification of safety-system equipment for nuclear power generating stations. A fundamental degradation model is developed, and its relation to more restricted models (e.g., Arrhenius and inverse-stress models) is shown. The most common theoretical and empirical models of aging are introduced, and limitations on their practical application are analyzed. Reliability theory and its application to the acceleration of aging are also discussed. A compendium of aging data for materials and components, including degradation mechanisms, failure modes and activation energies, is included.

  7. The review of recent carbonate minerals processing technology

    Science.gov (United States)

    Solihin

    2018-02-01

    Carbonate is one of the groups of minerals that can be found in relatively large amount in the earth crust. The common carbonate minerals are calcium carbonate (calcite, aragonite, depending on its crystal structure), magnesium carbonate (magnesite), calcium-magnesium carbonate (dolomite), and barium carbonate (barite). A large amount of calcite can be found in many places in Indonesia such as Padalarang, Sukabumi, and Tasikmalaya (West Java Provence). Dolomite can be found in a large amount in Gresik, Lamongan, and Tuban (East Java Provence). Magnesite is quite rare in Indonesia, and up to the recent years it can only be found in Padamarang Island (South East Sulawesi Provence). The carbonate has been being exploited through open pit mining activity. Traditionally, calcite can be ground to produce material for brick production, be carved to produce craft product, or be roasted to produce lime for many applications such as raw materials for cement, flux for metal smelting, etc. Meanwhile, dolomite has traditionally been used as a raw material to make brick for local buildings and to make fertilizer for coconut oil plant. Carbonate minerals actually consist of important elements needed by modern application. Calcium is one of the elements needed in artificial bone formation, slow release fertilizer synthesis, dielectric material production, etc. Magnesium is an important material in automotive industry to produce the alloy for vehicle main parts. It is also used as alloying element in the production of special steel for special purpose. Magnesium oxide can be used to produce slow release fertilizer, catalyst and any other modern applications. The aim of this review article is to present in brief the recent technology in processing carbonate minerals. This review covers both the technology that has been industrially proven and the technology that is still in research and development stage. One of the industrially proven technologies to process carbonate mineral is

  8. Ready-to-eat cereals and the burden of obesity in the context of their nutritional contribution: are all ready-to-eat cereals equally healthy? A systematic review.

    Science.gov (United States)

    Kosti, Rena I; Panagiotakos, Demosthenes B; Zampelas, Antonis

    2010-12-01

    A significant increase in the prevalence of obesity has occurred worldwide and the importance of considering the role of diet in the prevention and treatment of obesity is widely acknowledged. A growing body of evidence encourages the consumption of ready-to-eat cereals (RTEC) as part of a healthful diet. Research has shown an inverse association between the consumption of RTEC and the rate of obesity. However, other findings claim that this association was only attributed to the consumption of whole-grain cereals and not the refined-grain ones. Although meta-analyses of clinical trials support the use of a low-glycaemic index diet on weight loss, findings from other studies on the effect of the dietary glycaemic index on body weight have not been consistent. Thus, further research into the role of glycaemic index in the prevention and management of obesity and chronic disease is needed. Moreover, significant differences have been observed in composition among the marketed RTEC. In light of the revealing protective role of whole-grain, fibre-rich, low-energy-dense and low-glycaemic index/glycaemic load foods against obesity, public health professionals could drive their efforts towards the promotion of even more healthier RTEC when issuing advice on weight management. It seems, however, that despite any differences in their composition, the frequent consumption of RTEC due to their nutritional contribution is recommended in moderation and under the current recommendations in the context of a healthy balanced diet.

  9. Emotional Intelligence as a Determinant of Readiness for Online Learning

    Science.gov (United States)

    Buzdar, Muhammad Ayub; Ali, Akhtar; Tariq, Riaz Ul Haq

    2016-01-01

    Students' performance in online learning environments is associated with their readiness to adopt a digital learning approach. Traditional concept of readiness for online learning is connected with students' competencies of using technology for learning purposes. We in this research, however, investigated psychometric aspects of students'…

  10. Smart fabric sensors and e-textile technologies: a review

    International Nuclear Information System (INIS)

    Castano, Lina M; Flatau, Alison B

    2014-01-01

    This paper provides a review of recent developments in the rapidly changing and advancing field of smart fabric sensor and electronic textile technologies. It summarizes the basic principles and approaches employed when building fabric sensors as well as the most commonly used materials and techniques used in electronic textiles. This paper shows that sensing functionality can be created by intrinsic and extrinsic modifications to textile substrates depending on the level of integration into the fabric platform. The current work demonstrates that fabric sensors can be tailored to measure force, pressure, chemicals, humidity and temperature variations. Materials, connectors, fabric circuits, interconnects, encapsulation and fabrication methods associated with fabric technologies prove to be customizable and versatile but less robust than their conventional electronics counterparts. The findings of this survey suggest that a complete smart fabric system is possible through the integration of the different types of textile based functional elements. This work intends to be a starting point for standardization of smart fabric sensing techniques and e-textile fabrication methods. (topical review)

  11. Proceedings of the 1999 Review Conference on Fuel Cell Technology

    Energy Technology Data Exchange (ETDEWEB)

    None Available

    2000-06-05

    The 1999 Review Conference on Fuel Cell Technology was jointly sponsored by the U.S. Department of Energy, Federal Energy Technology Center (FETC), the Gas Research Institute (GRI), and the Electric Power Research Institute (EPRI). It was held August 3 to 5 in Chicago, Illinois. The goal of this conference was to provide a forum for reviewing fuel cell research and development (R&D) programs, assist in strategic R&D planning, promote awareness of sponsor activities, and enhance interactions between manufacturers, researchers, and stakeholders. This conference was attended by over 250 representatives from industry, academia, national laboratories, gas and electric utilities, DOE, and other Government agencies. The conference agenda included a keynote session, five presentation sessions, a poster presentation reception, and three breakout sessions. The presentation session topics were DOD Fuel Cell Applications, Low-Temperature Fuel Cell Manufacturers, Low-Temperature Component Research, High-Temperature Fuel Cell Manufacturers, and High-Temperature Component Research; the breakout session topics were Future R&D Directions for Low-Temperature Fuel Cells, Future R&D Directions for High-Temperature Fuel Cells, and a plenary summary session. All sessions were well attended.

  12. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  13. Preparing for success: Readiness models for rural telehealth

    Directory of Open Access Journals (Sweden)

    Jennett P

    2005-01-01

    Full Text Available Background: Readiness is an integral and preliminary step in the successful implementation of telehealth services into existing health systems within rural communities. Methods and Materials: This paper details and critiques published international peer-reviewed studies that have focused on assessing telehealth readiness for rural and remote health. Background specific to readiness and change theories is provided, followed by a critique of identified telehealth readiness models, including a commentary on their readiness assessment tools. Results: Four current readiness models resulted from the search process. The four models varied across settings, such as rural outpatient practices, hospice programs, rural communities, as well as government agencies, national associations, and organizations. All models provided frameworks for readiness tools. Two specifically provided a mechanism by which communities could be categorized by their level of telehealth readiness. Discussion: Common themes across models included: an appreciation of practice context, strong leadership, and a perceived need to improve practice. Broad dissemination of these telehealth readiness models and tools is necessary to promote awareness and assessment of readiness. This will significantly aid organizations to facilitate the implementation of telehealth.

  14. A systematic review of game technologies for pediatric patients.

    Science.gov (United States)

    Jurdi, Sandra; Montaner, Jorge; Garcia-Sanjuan, Fernando; Jaen, Javier; Nacher, Vicente

    2018-06-01

    Children in hospital are subjected to multiple negative stimuli that may hinder their development and social interactions. Although game technologies are thought to improve children's experience in hospital, there is a lack of information on how they can be used effectively. This paper presents a systematic review of the literature on the existing approaches in this context to identify gaps for future research. A total of 1305 studies were identified, of which 75 were thoroughly analyzed according to our review protocol. The results show that the most common approach is to design mono-user games with traditional computers or monitor-based video consoles, which serve as a distractor or a motivator for physical rehabilitation for primary school children undergoing fearful procedures such as venipuncture, or those suffering chronic, neurological, or traumatic diseases/injures. We conclude that, on the one hand, game technologies seem to present physical and psychological benefits to pediatric patients, but more research is needed on this. On the other hand, future designers of games for pediatric hospitalization should consider: 1. The development for kindergarten patients and adolescents, 2. Address the psychological impact caused by long-term hospitalization, 3. Use collaboration as an effective game strategy to reduce patient isolation, 4. Have purposes other than distraction, such as socialization, coping with emotions, or fostering physical mobility, 5. Include parents/caregivers and hospital staff in the game activities; and 6. Exploit new technological artifacts such as robots and tangible interactive elements to encourage intrinsic motivation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Review of Magneto cardiography Technology based on SQUID

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. H.; Kwon, H.; Kim, J. M.; Kim, K.; Yu, K. K.; Park, Y. K. [Brain and Cognition Measurement Lab, Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

    2012-04-15

    Electric activity of cardiac muscles generates magnetic fields. Magnetocardiography (or MCG) technology, measuring these magnetic signals, can provide useful information for the diagnosis of heart diseases. It is already about 40 years ago that the first measurement of MCG signals was done by D. Cohen using SQUID (superconducting quantum interference device) sensor inside a magnetically shielded room. In the early period of MCG history, bulky point-contact RF-SQUID was used as the magnetic sensor. Thanks to the development of Nb-based Josephson junction technology in mid 1980s and new design of tightly-coupled DC-SQUID, low-noise SQUID sensors could be developed in late 1980s. In around 1990, several groups developed multi-channel MCG systems and started clinical study. However, it is quite recent years that the true usefulness of MCG was verified in clinical practice, for example, in the diagnosis of coronary artery disease. For the practical MCG system, technical elements of MCG system should be optimized in terms of performance, fabrication cost and operation cost. In this review, development history, technical issue, and future development direction of MCG technology are described.

  16. A review of digital radiography technology for valve inspection

    International Nuclear Information System (INIS)

    Stoev, K.; Guerout, F.M.; Horn, D.

    2008-01-01

    There are thousands of valves in a nuclear power plant (NPP) used for control, safety and checks in various plant systems, so there is a well-identified need for fast and reliable inspection and diagnostics of valves. Digital radiography can provide considerable improvements to the inspection and testing procedures for valves in comparison to classical film radiography. These improvements can lead to significant financial advantages by providing real-time inspection results, significantly reduced inspection and decision-making time, and reduced operational cost. Digital image processing, including digital image enhancement, digital archiving, and digital communication of the images and the results, is also a considerable advantage over classical film radiography technology. Another advantage of digital radiography technology is the improved safety and the reduced environmental impact due to reduced exposure/test times, use of smaller exclusion zones, elimination of chemical processing, and absence of disposable materials. This paper reviews the existing technology and evaluates the potential of digital radiography for inspection and diagnostics of valves. Station needs and requirements are assessed, and the safety, environmental and economical constraints of digital radiography techniques estimated. The advantages and disadvantages of different digital radiography equipment are compared, and their limitations and characteristics studied. (author)

  17. A review of the Technologies Enabling Agile Manufacturing program

    Energy Technology Data Exchange (ETDEWEB)

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  18. Strategic learning and information and communication technology: a critical review

    Directory of Open Access Journals (Sweden)

    Carles Monerero Font

    2013-08-01

    Full Text Available 0 0 1 93 514 USAL 4 1 606 14.0 Normal 0 21 false false false ES JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ES; mso-fareast-language:EN-US;} This article presents an outline of a learning strategy redefinition, based on recent contributions from learning technologies. This new definition addresses the question of how technological affordances of the software, of the technological tools, or an educational environment, allow a learner or a group of learners develop a new ways to perform a strategic learning action. We review how different characteristics of learning strategy definition have been transformed because of introduction of ICT into education. Finally, the article points toward conceptual challenges and future research questions.

  19. A Review of Multi-Sensory Technologies in a Science, Technology, Engineering, Arts and Mathematics (STEAM) Classroom

    Science.gov (United States)

    Taljaard, Johann

    2016-01-01

    This article reviews the literature on multi-sensory technology and, in particular, looks at answering the question: "What multi-sensory technologies are available to use in a science, technology, engineering, arts and mathematics (STEAM) classroom, and do they affect student engagement and learning outcomes?" Here engagement is defined…

  20. Optically pumped VECSELs: review of technology and progress

    International Nuclear Information System (INIS)

    Guina, M; Rantamäki, A; Härkönen, A

    2017-01-01

    Vertical-external-cavity surface-emitting lasers (VECSELs) are the most versatile laser sources, combining unique features such as wide spectral coverage, ultrashort pulse operation, low noise properties, high output power, high brightness and compact form-factor. This paper reviews the recent technological developments of VECSELs in connection with the new milestones that continue to pave the way towards their use in numerous applications. Significant attention is devoted to the fabrication of VECSEL gain mirrors in challenging wavelength regions, especially at the yellow and red wavelengths. The reviewed fabrication approaches address wafer-bonded VECSEL structures as well as the use of hybrid mirror structures. Moreover, a comprehensive summary of VECSEL characterization methods is presented; the discussion covers different stages of VECSEL development and different operation regimes, pointing out specific characterization techniques for each of them. Finally, several emerging applications are discussed, with emphasis on the unique application objectives that VECSELs render possible, for example in atom and molecular physics, dermatology and spectroscopy. (topical review)

  1. Financial effects of health information technology: a systematic review.

    Science.gov (United States)

    Low, Alexander F H; Phillips, Andrew B; Ancker, Jessica S; Patel, Ashwin R; Kern, Lisa M; Kaushal, Rainu

    2013-11-01

    Health information technology (HIT) is widely viewed as an important lever with which to improve the quality and efficiency of the healthcare system. However, there has long been debate about its financial effects. To characterize the existing data on the financial effects of HIT and to consider the implications for the effect of HIT on healthcare spending. Systematic literature review. We identified articles by (1) searching PubMed using the intersection of terms related to HIT applications and terms related to financial or economic effect; and (2) reviewing the reference lists of the included articles as well as additional policy articles and literature reviews. A total of 57 articles met our inclusion criteria, including 43 articles (75%) reporting financial benefits to a stakeholder associated with HIT. These included 26 articles (46%) reporting cost savings, 6 articles (11%) reporting revenue gains, and 11 articles (19%) reporting a mixture of cost savings and revenue gains. Among articles with experimental study designs, 22 of 34 (65%) reported financial benefits; and among articles explicitly measuring costs and benefits, 19 of 21 (90%) reported financial benefits. The most prevalent mechanisms were savings on administrative goods and/or personnel, savings on pharmaceuticals, and revenue gains through improved billing. Overall there is a dearth of articles on this topic, especially ones with strong study designs and financial analyses. HIT can have financial benefits, but more research is required, especially on HIT's effects under emerging delivery and payment reform efforts.

  2. Fair Oaks Dairy Farms Cellulosic Ethanol Technology Review Summary

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Wold; Robert Divers

    2011-06-23

    At Fair Oaks Dairy, dried manure solids (''DMS'') are currently used as a low value compost. United Power was engaged to evaluate the feasibility of processing these DMS into ethanol utilizing commercially available cellulosic biofuels conversion platforms. The Fair Oaks Dairy group is transitioning their traditional ''manure to methane'' mesophilic anaerobic digester platform to an integrated bio-refinery centered upon thermophilic digestion. Presently, the Digested Manure Solids (DMS) are used as a low value soil amendment (compost). United Power evaluated the feasibility of processing DMS into higher value ethanol utilizing commercially available cellulosic biofuels conversion platforms. DMS was analyzed and over 100 potential technology providers were reviewed and evaluated. DMS contains enough carbon to be suitable as a biomass feedstock for conversion into ethanol by gasification technology, or as part of a conversion process that would include combined heat and power. In the first process, 100% of the feedstock is converted into ethanol. In the second process, the feedstock is combusted to provide heat to generate electrical power supporting other processes. Of the 100 technology vendors evaluated, a short list of nine technology providers was developed. From this, two vendors were selected as finalists (one was an enzymatic platform and one was a gasification platform). Their selection was based upon the technical feasibility of their systems, engineering expertise, experience in commercial or pilot scale operations, the ability or willingness to integrate the system into the Fair Oaks Biorefinery, the know-how or experience in producing bio-ethanol, and a clear path to commercial development.

  3. Virtual and augmented reality technologies in Human Performance: a review

    Directory of Open Access Journals (Sweden)

    Tânia Brusque Crocetta

    Full Text Available Abstract Introduction : Today's society is influenced by Information and Communication Technologies. Toys that were once built by hand have been reinterpreted and have become highly commercialized products. In this context, games using Augmented Reality (AR and Virtual Reality (VR technologies are present in the everyday lives of children, youth and adults. Objective : To investigate how Physical Education professionals in Brazil have been making use of AR and VR games to benefit their work. Materials and methods : We only included studies that addressed exercise or physical activity using AR or VR games. We searched the databases of Virtual Health Library (VHL and Scientific Electronic Library Online (SciELO, using the words augmented reality, virtual reality, exergames, Wii and serious games. Results : Nineteen articles were included in the systematic review. The most frequently used device was the Nintendo(r Wii, with over 25 different kinds of games. With regard to the subjects of the studies, four studies were conducted with healthy individuals (mean = 65.7, three with patients with Parkinson's disease (mean = 18.0, three with elderly women (mean = 7.7 and two with patients with stroke injury (mean = 6.0. Conclusion : Many physical therapists and occupational therapists use serious games with AR or VR technologies as another work tool, especially for rehabilitation practices. The fact that these technologies are also used in Physical Education classes in Brazil indicates that electronic games are available and can be a tool that can contribute to the widespread adoption of exercise as an enjoyable form of recreation.

  4. Residential cogeneration systems: review of the current technology

    International Nuclear Information System (INIS)

    Onovwiona, H.I.; Ugursal, V.I.

    2006-01-01

    There is a growing potential for the use of micro-cogeneration systems in the residential sector because they have the ability to produce both useful thermal energy and electricity from a single source of fuel such as oil or natural gas. In cogeneration systems, the efficiency of energy conversion increases to over 80% as compared to an average of 30-35% for conventional fossil fuel fired electricity generation systems. This increase in energy efficiency can result in lower costs and reduction in greenhouse gas emissions when compared to the conventional methods of generating heat and electricity separately. Cogeneration systems and equipment suitable for residential and small-scale commercial applications like hospitals, hotels or institutional buildings are available, and many new systems are under development. These products are used or aimed for meeting the electrical and thermal demands of a building for space and domestic hot water heating, and potentially, absorption cooling. The aim of this paper is to provide an up-to-date review of the various cogeneration technologies suitable for residential applications. The paper considers the various technologies available and under development for residential, i.e. single-family ( e ) and multi-family (10-30kW t ) applications, with focus on single-family applications. Technologies suitable for residential cogeneration systems include reciprocating internal combustion engine, micro-turbine, fuel cell, and reciprocating external combustion Stirling engine based cogeneration systems. The paper discusses the state of development and the performance, environmental benefits, and costs of these technologies. (author)

  5. Understanding Monitoring Technologies for Adults With Pain: Systematic Literature Review.

    Science.gov (United States)

    Rodríguez, Iyubanit; Herskovic, Valeria; Gerea, Carmen; Fuentes, Carolina; Rossel, Pedro O; Marques, Maíra; Campos, Mauricio

    2017-10-27

    Monitoring of patients may decrease treatment costs and improve quality of care. Pain is the most common health problem that people seek help for in hospitals. Therefore, monitoring patients with pain may have significant impact in improving treatment. Several studies have studied factors affecting pain; however, no previous study has reviewed the contextual information that a monitoring system may capture to characterize a patient's situation. The objective of this study was to conduct a systematic review to (1) determine what types of technologies have been used to monitor adults with pain, and (2) construct a model of the context information that may be used to implement apps and devices aimed at monitoring adults with pain. A literature search (2005-2015) was conducted in electronic databases pertaining to medical and computer science literature (PubMed, Science Direct, ACM Digital Library, and IEEE Xplore) using a defined search string. Article selection was done through a process of removing duplicates, analyzing title and abstract, and then reviewing the full text of the article. In the final analysis, 87 articles were included and 53 of them (61%) used technologies to collect contextual information. A total of 49 types of context information were found and a five-dimension (activity, identity, wellness, environment, physiological) model of context information to monitor adults with pain was proposed, expanding on a previous model. Most technological interfaces for pain monitoring were wearable, possibly because they can be used in more realistic contexts. Few studies focused on older adults, creating a relevant avenue of research on how to create devices for users that may have impaired cognitive skills or low digital literacy. The design of monitoring devices and interfaces for adults with pain must deal with the challenge of selecting relevant contextual information to understand the user's situation, and not overburdening or inconveniencing users with

  6. Capture ready fossil fuel plants: a critical stage in tackling climate change

    Energy Technology Data Exchange (ETDEWEB)

    Gibbins, J.; Jia Li; Xi Liang [Imperial College, London (United Kingdom). Energy Technology for Sustainable Development Group

    2006-07-01

    Ways in which gasification-based systems can approach the CO{sub 2} capture ready ideal is discussed, together with possible methods for assessing the optimum degree of capture readiness. A key technology choice for power plants is whether or not to incorporate a shift before capture. Financial returns for making plants capture ready are also discussed. 10 refs., 3 tabs.

  7. Review of deployment technology for tethered satellite systems

    Science.gov (United States)

    Yu, B. S.; Wen, H.; Jin, D. P.

    2018-03-01

    Tethered satellite systems (TSSs) have attracted significant attention due to their potential and valuable applications for scientific research. With the development of various launched on-orbit missions, the deployment of tethers is considered a crucial technology for operation of a TSS. Both past orbiting experiments and numerical results have shown that oscillations of the deployed tether due to the Coriolis force and environmental perturbations are inevitable and that the impact between the space tether and end-body at the end of the deployment process leads to complicated nonlinear phenomena. Hence, a set of suitable control methods plays a fundamental role in tether deployment. This review article summarizes previous work on aspects of the dynamics, control, and ground-based experiments of tether deployment. The relevant basic principles, analytical expressions, simulation cases, and experimental results are presented as well.

  8. When Intrusion Detection Meets Blockchain Technology: A Review

    DEFF Research Database (Denmark)

    Meng, Weizhi; Tischhauser, Elmar Wolfgang; Wang, Qingju

    2018-01-01

    developed, which allow IDS nodes to exchange data with each other. However, data and trust management still remain two challenges for current detection architectures, which may degrade the effectiveness of such detection systems. In recent years, blockchain technology has shown its adaptability in many...... fields such as supply chain management, international payment, interbanking and so on. As blockchain can protect the integrity of data storage and ensure process transparency, it has a potential to be applied to intrusion detection domain. Motivated by this, this work provides a review regarding...... the intersection of IDSs and blockchains. In particular, we introduce the background of intrusion detection and blockchain, discuss the applicability of blockchain to intrusion detection, and identify open challenges in this direction....

  9. A review of hydrogeology research techniques and technology

    International Nuclear Information System (INIS)

    Grisak, G.E.; Pickens, J.F.

    1985-06-01

    A review of techniques and technology pertaining to the movement of ground water, solutes/radionuclides and heat through porous and fractured media has been conducted. The theory describing each of these processes has been presented in terms of their partial differential equations. The equations serve as the basis for the identification of processes. These parameters have been discussed in detail with regards to their importance in controlling the overall transport processes. A hypothetical research program has been assembled for the purpose of illustrating the hydrogeologic methods and research techniques applicable to site characterization studies. Areas where the current state of the art is lacking have been identified and the necessary research has been recommended. 103 refs

  10. CONFERENCE REVIEW:V. International Educational Technology Symposium

    Directory of Open Access Journals (Sweden)

    Reviewed by Mubin KIYICI

    2005-10-01

    Full Text Available 167V. International Educational Technology SymposiumWas held in Sakarya UniversityBetween 21 – 23 September 2005Reviewed by Mubin KIYICISakarya Universitymkiyici@anadolu.edu.trV. International Educational Technology Symposium was held in Sakarya University heldbetween 21 – 23 September 2005 by cooperation with Eastern Mediterranean University,Louisiana State University, Governors State University and Ohio University, and TOJET(The Turkish Online Journal of Educational Technology journal, at Sakarya UniversityCampus. Assoc. Prof. Dr. Aytekin ISMAN who was conference coordinator and Editor inchief of TOJET spoke at the opening ceremony of symposium. His speech was related todiffusion of distance education and diffusion of usage educational technology. And thenProf. Dr. Mehmet DURMAN who is Rector of Sakarya University, talked about aapplications of Distance Education which is applied by Sakarya University and educationaltechnology applications in Tukey. His Speech is here:168Dear GuestsWelcome to the “5th International Educational Technology ConferenceIETC/EGİTEK 2005. It is an international educational activity for academics,teachers and educators. This conference is now a well known educationaltechnology event and the number of paper submissions and attendeesincrease every year.This year, IETC-2005 received 268 applications. The conference academicadvisory board accepted 209 applications.IETC-2005 promotes the development and dissemination of theoreticalknowledge, conceptual research, and professional knowledge throughconference activities, the conference proceeding book, and the TurkishOnline Journal of Educational Technology (TOJET. Its focus is to create anddisseminate knowledge about the use instructional technology for learningand teaching in education.The main theme of IETC-2005 is distance education. Distance education is adelivery system of teaching and learning, when the teacher and the studentare separated by physical distance

  11. Technology Acceptance Related to Second Life[TM], Social Networking, Twitter[TM], and Content Management Systems: Are Agricultural Students Ready, Willing, and Able?

    Science.gov (United States)

    Murphrey, Theresa Pesl; Rutherford, Tracy A.; Doerfert, David L.; Edgar, Leslie D.; Edgar, Don W.

    2012-01-01

    Technology has the potential to improve education but only if it is applied with purpose and consideration of the audience. Understanding technology's role in education goes beyond the comparison of tools; there is a need to better understand student acceptance of technology so appropriate educational scaffolding and support can be provided. The…

  12. Water Desalination Studies Using Forward Osmosis Technology, A Review

    International Nuclear Information System (INIS)

    Abou El-Nour, F.H.

    2016-01-01

    Fresh water and energy shortage represent a great challenge facing the whole world now. To cover the global water demand, an energy-efficient approach is required to be applied in the suitable technology to achieve the shortage in the fresh water demand. Different techniques are used to solve this problem. A mong the different methods applied to desalinate seawater is the osmosis technologies . Although reversible osmosis (RO) is the most familiar method used for this purpose, forward osmosis (FO) represents a more suitable technique due to several arguments including low energy cost. The present study represents the use of FO technique for water desalination with adsorption regeneration. In this respect, a self-prepared granular active carbon produced from dates is to be used as an adsorbent agent. The physical characteristics of the active carbon are studied such as BET specific surface area, pore size, particle size and the structure using scanning electron microscope (SEM). Different advanced apparatus are used for such measurements. In addition, the adsorption is otherms (Langmuier and Freundlich) are established to explain the adsorption mechanism of the process. Accordingly, the review includes essential information and sufficient backgrounds in the field of desalination using FO or simply direct osmosis, which overcome the different difficulties present in reversible RO

  13. Smartphone-Based Food Diagnostic Technologies: A Review.

    Science.gov (United States)

    Rateni, Giovanni; Dario, Paolo; Cavallo, Filippo

    2017-06-20

    A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT) market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies.

  14. Smartphone-Based Food Diagnostic Technologies: A Review

    Directory of Open Access Journals (Sweden)

    Giovanni Rateni

    2017-06-01

    Full Text Available A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies.

  15. Smartphone-Based Food Diagnostic Technologies: A Review

    Science.gov (United States)

    Rateni, Giovanni; Dario, Paolo; Cavallo, Filippo

    2017-01-01

    A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT) market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies. PMID:28632188

  16. SSNTD applications in science and technology - A brief review

    International Nuclear Information System (INIS)

    Khan, H.A.; Qureshi, I.E.

    1999-01-01

    The technique of Solid State Nuclear Track Detection (SSNTD) has matured since long as a viable method of charged particle detection. The usage of this method has been successfully extended to neutron detection and gamma dose measurements as well. The etch-track mechanism has been further exploited to generate a major application area of nuclear track filters. In spite of the remarkable diversity of SSNTD applications that have emerged over the years in different fields, its potential is by no means saturated. In this article, a brief review of SSNTD applications is presented with reference to contemporary interests in science and technology. For convenience, the coverage of topics is organized under broad categories of Nuclear Physics, Materials Research, Geology, Environmental Science and allied technologies. While identifying high interest areas, those with limited but innovative applications are also mentioned. In some cases, the important results are quoted for the purpose of illustrating the strength of track detection method. In general, the presentation is aimed at providing a broad perspective of current SSNTD uses instead of detailed description of individual applications. The coverage is selective rather than exhaustive and portrays authors' preferences. Some comments related to the adoption of this technique as a mainstream method of detection are also given

  17. Microbial platform technology for recombinant antibody fragment production: A review.

    Science.gov (United States)

    Gupta, Sanjeev Kumar; Shukla, Pratyoosh

    2017-02-01

    Recombinant antibody fragments are being used for the last few years as an important therapeutic protein to cure various critical and life threatening human diseases. Several expression platforms now days employed for the production of these recombinant fragments, out of which bacterial system has emerged a promising host for higher expression. Since, a small antibody fragment unlike full antibody does not require human-like post-translational modification therefore it is potentially expressed in prokaryotic production system. Recently, small antibody fragments such as scFvs (single-chain variable fragments) and Fabs (antibody fragments) which does not require glycosylation are successfully produced in bacteria and have commercially launched for therapeutic use as these fragments shows better tissue penetration and less immunogenic to human body compared to full-size antibody. Recently developed Wacker's ESETEC secretion technology is an efficient technology for the expression and secretion of the antibody fragment (Fab) exceeded up to 4.0 g/L while scFv up to 3.5 g/L into the fermentation broth. The Pfenex system and pOP prokaryotic expression vector are another platform used for the considerably good amount of antibody fragment production successfully. In this review, we summarize the recent progress on various expression platforms and cloning approaches for the production of different forms of antibody fragments in E. coli.

  18. Readiness for Meaningful Use of Health Information Tech...

    Data.gov (United States)

    U.S. Department of Health & Human Services — According to findings reported in Readiness for Meaningful Use of Health Information Technology and Patient Centered Medical Home Recognition Survey Results,...

  19. Amino acids production focusing on fermentation technologies - A review.

    Science.gov (United States)

    D'Este, Martina; Alvarado-Morales, Merlin; Angelidaki, Irini

    Amino acids are attractive and promising biochemicals with market capacity requirements constantly increasing. Their applicability ranges from animal feed additives, flavour enhancers and ingredients in cosmetic to specialty nutrients in pharmaceutical and medical fields. This review gives an overview of the processes applied for amino acids production and points out the main advantages and disadvantages of each. Due to the advances made in the genetic engineering techniques, the biotechnological processes, and in particular the fermentation with the aid of strains such as Corynebacterium glutamicum or Escherichia coli, play a significant role in the industrial production of amino acids. Despite the numerous advantages of the fermentative amino acids production, the process still needs significant improvements leading to increased productivity and reduction of the production costs. Although the production processes of amino acids have been extensively investigated in previous studies, a comprehensive overview of the developments in bioprocess technology has not been reported yet. This review states the importance of the fermentation process for industrial amino acids production, underlining the strengths and the weaknesses of the process. Moreover, the potential of innovative approaches utilizing macro and microalgae or bacteria are presented. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Technological review of the HRP manufacturing process R and D activity

    International Nuclear Information System (INIS)

    Visca, Eliseo; Pizzuto, A.; Gavila, P.; Riccardi, B.; Roccella, S.; Candura, D.; Sanguinetti, G.P.

    2013-01-01

    Highlights: • R and D activities for the manufacturing of ITER divertor high heat flux plasma-facing components (HHFC). • ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components. • Successful manufacturing by HRP (hot radial pressing) and PBC (pre-brazed casting) of both W and CFC armoured small and medium scale mockups. • ENEA-ANSALDO participate to the European programme for the qualification of the manufacturing technology for the ITER divertor IVT. • A qualification divertor inner vertical target prototype successfully tested at ITER relevant thermal heat fluxes. -- Abstract: ENEA and Ansaldo Nucleare S.p.A. have been deeply involved in the European International Thermonuclear Experimental Reactor (ITER) R and D activities for the manufacturing of high heat flux plasma-facing components (HHFC), and in particular for the inner vertical target (IVT) of the ITER divertor. This component has to be manufactured by using both armour and structural materials whose properties are defined by ITER. Their physical properties prevent the use of standard joining techniques. The reference armour materials are tungsten and carbon/carbon fibre composite (CFC). The cooling pipe is made of copper alloy (CuCrZr-IG). During the last years ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components of different length, geometry and materials, by using innovative processes: HRP (hot radial pressing) and PBC (pre-brazed casting). The history of the technical issues solved during the R and D phase and the improvements implemented to the assembling tools and equipments are reviewed in the paper together with the testing results. The optimization of the processes started from the successful manufacturing of both W and CFC armoured small scale mockups thermal fatigue tested in the worst ITER operating condition (20 MW/m 2 ) through the achievement of record

  1. Technological review of the HRP manufacturing process R and D activity

    Energy Technology Data Exchange (ETDEWEB)

    Visca, Eliseo, E-mail: eliseo.visca@enea.it [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, Via E. Fermi 45, IT-00044 Frascati (Italy); Pizzuto, A. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, Via E. Fermi 45, IT-00044 Frascati (Italy); Gavila, P.; Riccardi, B. [Fusion For Energy, C. Josep Pla 2, ES-08019 Barcelona (Spain); Roccella, S. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, Via E. Fermi 45, IT-00044 Frascati (Italy); Candura, D.; Sanguinetti, G.P. [Ansaldo Nucleare S.p.A., Corso Perrone 25, IT-16121 Genova (Italy)

    2013-10-15

    Highlights: • R and D activities for the manufacturing of ITER divertor high heat flux plasma-facing components (HHFC). • ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components. • Successful manufacturing by HRP (hot radial pressing) and PBC (pre-brazed casting) of both W and CFC armoured small and medium scale mockups. • ENEA-ANSALDO participate to the European programme for the qualification of the manufacturing technology for the ITER divertor IVT. • A qualification divertor inner vertical target prototype successfully tested at ITER relevant thermal heat fluxes. -- Abstract: ENEA and Ansaldo Nucleare S.p.A. have been deeply involved in the European International Thermonuclear Experimental Reactor (ITER) R and D activities for the manufacturing of high heat flux plasma-facing components (HHFC), and in particular for the inner vertical target (IVT) of the ITER divertor. This component has to be manufactured by using both armour and structural materials whose properties are defined by ITER. Their physical properties prevent the use of standard joining techniques. The reference armour materials are tungsten and carbon/carbon fibre composite (CFC). The cooling pipe is made of copper alloy (CuCrZr-IG). During the last years ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components of different length, geometry and materials, by using innovative processes: HRP (hot radial pressing) and PBC (pre-brazed casting). The history of the technical issues solved during the R and D phase and the improvements implemented to the assembling tools and equipments are reviewed in the paper together with the testing results. The optimization of the processes started from the successful manufacturing of both W and CFC armoured small scale mockups thermal fatigue tested in the worst ITER operating condition (20 MW/m{sup 2}) through the achievement of record

  2. What Is Technology Education? A Review of the "Official Curriculum"

    Science.gov (United States)

    Brown, Ryan A.; Brown, Joshua W.

    2010-01-01

    Technology education, not to be confused with educational technology, has an "official curriculum." This article explores this "official curriculum" and answers the following questions; what are the goals of technology education, what should technology education look like in classrooms, and why technology education is important. This article…

  3. Reviewing the relations between teachers' knowledge and pupils' attitude in the field of primary technology education

    NARCIS (Netherlands)

    Ruurd Taconis; dr. Ellen J. J Rohaan; Wim Jochems

    2010-01-01

    This literature review reports on the assumed relations between primary school teachers' knowledge of technology and pupils' attitude towards technology. In order to find relevant aspects of technology-specific teacher knowledge, scientific literature in the field of primary technology education was

  4. Review of Enabling Technologies to Facilitate Secure Compute Customization

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pelfrey, Daniel S [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2014-12-01

    High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data for a variety of users, often requiring strong separation between job allocations. There are many challenges to establishing these secure enclaves within the shared infrastructure of high-performance computing (HPC) environments. The isolation mechanisms in the system software are the basic building blocks for enabling secure compute enclaves. There are a variety of approaches and the focus of this report is to review the different virtualization technologies that facilitate the creation of secure compute enclaves. The report reviews current operating system (OS) protection mechanisms and modern virtualization technologies to better understand the performance/isolation properties. We also examine the feasibility of running ``virtualized'' computing resources as non-privileged users, and providing controlled administrative permissions for standard users running within a virtualized context. Our examination includes technologies such as Linux containers (LXC [32], Docker [15]) and full virtualization (KVM [26], Xen [5]). We categorize these different approaches to virtualization into two broad groups: OS-level virtualization and system-level virtualization. The OS-level virtualization uses containers to allow a single OS kernel to be partitioned to create Virtual Environments (VE), e.g., LXC. The resources within the host's kernel are only virtualized in the sense of separate namespaces. In contrast, system-level virtualization uses hypervisors to manage multiple OS kernels and virtualize the physical resources (hardware) to create Virtual Machines (VM), e.g., Xen, KVM. This terminology of VE and VM, detailed in Section 2, is used throughout the report to distinguish between the two different approaches to providing virtualized execution

  5. 5th International Conference OTEH 2012 - defense technology (Proceedings review

    Directory of Open Access Journals (Sweden)

    Vlado Petar Đurković

    2013-02-01

    Full Text Available This article gives an overview of all papers and events at the Fifth International ScientificConference on Defense Technologies OTEH 2012 held in Belgrade, in the Military Technical Institute (VTI, from 18th to 19th September 2012.The paper review presents the Conference Sections by subjects and guest-lectureres as well as the institutions of all authors who actively participated at the Conference.About the ConferenceThe Fifth International Scientific Conference on Defense Technologies OTEH 2012  was held in Belgrade in the Military Technical Institute in Žarkovo, from 18th to 19thSeptember 2012..The Conference program was organized in two plenary sessions and a working part which took place in four halls.In the plenary session, two key lectures were held by eminent experts from abroad. The first lecture entitled „An adaptive remeshing technique for 3D crack growth simulations”, was given by Dr Vincent Chiaruttini (ONERA Institute, Paris, France. The second one, „New Technologies for Advanced Defence Systems”, was held by Dr Filippo Neri (Virtualabs Company, Rome, Italy.Fifteen sessions were organised at the Conference. The authors presented their works in open discussions answering questions from the audience. The average number of attendees at each session was about 40.The papers were sorted by topic areas:Aerodynamics and flight dynamics: 12 papersAircraft: 23 papersWeapon systems, ammunition, energy materials, combat vehicles: 29 papersIntegrated sensor systems and robotic systems: 16 papersTelecommunication and information systems: 18 papersMaterials and technologies: 34 papersQuality, standardization, metrology, maintenance and exploitation: 11 papersOut of 163 submitted papers for this Conference, 145 papers were accepted and distributed in an electronic form on CDs to the present authors, co-authors, guests and invitees to the Conference. The number of participants with authors and co-authors was impressive - 243. The

  6. Technology Assessment Need: Review on Attractiveness and Competitiveness

    Science.gov (United States)

    Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

    2017-06-01

    Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

  7. Fact Sheet for Friction Materials Manufacturing Facilities Residual Risk and Technology Review

    Science.gov (United States)

    proposed amendments to the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Friction Materials Manufacturing Facilities to address the results of the residual risk and technology review

  8. A review on advances of torrefaction technologies for biomass processing

    Energy Technology Data Exchange (ETDEWEB)

    Acharya, Bimal; Sule, Idris; Dutta, Animesh [University of Guelph, School of Engineering, Guelph, ON (Canada)

    2012-12-15

    Torrefaction is a thermochemical pretreatment process at 200-300 C in an inert condition which transforms biomass into a relatively superior handling, milling, co-firing and clean renewable energy into solid biofuel. This increases the energy density, water resistance and grindability of biomass and makes it safe from biological degradation which ultimately makes easy and economical on transportation and storing of the torrefied products. Torrefied biomass is considered as improved version than the current wood pellet products and an environmentally friendly future alternative for coal. Torrefaction carries devolatilisation, depolymerization and carbonization of lignocellulose components and generates a brown to black solid biomass as a productive output with water, organics, lipids, alkalis, SiO{sub 2}, CO{sub 2}, CO and CH{sub 4}. During this process, 70 % of the mass is retained as a solid product, and retains 90 % of the initial energy content. The torrefied product is then shaped into pellets or briquettes that pack much more energy density than regular wood pellets. These properties minimize on the difference in combustion characteristics between biomass and coal that bring a huge possibility of direct firing of biomass in an existing coal-fired plant. Researchers are trying to find a solution to fire/co-fire torrefied biomass instead of coal in an existing coal-fired based boiler with minimum modifications and expenditures. Currently available torrefied technologies are basically designed and tested for woody biomass so further research is required to address on utilization of the agricultural biomass with technically and economically viable. This review covers the torrefaction technologies, its' applications, current status and future recommendations for further study. (orig.)

  9. School Readiness Factor Analyzed.

    Science.gov (United States)

    Brenner, Anton; Scott, Leland H.

    This paper is an empirical statistical analysis and interpretation of data relating to school readiness previously examined and reported on a theoretical basis. A total of 118 white, middle class children from six consecutive kindergarten groups in Dearborn, Michigan were tested with seven instruments, evaluated in terms of achievement, ability,…

  10. GIS Readiness Survey 2014

    DEFF Research Database (Denmark)

    Schrøder, Lise; Hvingel, Line Træholt; Hansen, Henning Sten

    2014-01-01

    The GIS Readiness Survey 2014 is a follow-up to the corresponding survey that was carried out among public institutions in Denmark in 2009. The present survey thus provides an updated image of status and challenges in relation to the use of spatial information, the construction of the com- mon...

  11. The Readiness of Sorsogon State College Faculty for Teaching with ICT: Basis for a Faculty Training Program

    Directory of Open Access Journals (Sweden)

    Catherine A. De Castro

    2016-02-01

    Full Text Available Information and communication technologies (ICT such as computers, multimedia systems, productivity software, and the Internet have greatly improved the performance of different organizations and influenced higher learning institutions like Sorsogon State College (SSC to develop and implement innovative teaching and learning methods. However, despite the many benefits of ICT when used in education, there are still faculty members who do not use these technologies for teaching. Hence, this research was conducted to assess their readiness for teaching with ICT. Findings revealed that most of the surveyed respondents were above forty-five years old, have 1-10 years of government service, and have specialization in the field of education. In terms of readiness to teach with ICT, the results disclosed that they were fairly ready along human-resource readiness, ready along technological skill readiness, and much ready along equipment readiness. Their age was not significantly related to their human resource readiness but significantly related to their technological skill and equipment readiness. The respondents’ number of years in the government was significantly related to their readiness to teach with ICT in terms of human resource, technological skill, and equipment readiness. Their field of specialization was not significantly related to their readiness to teach with ICT. Among the most identified factors why some of them do not use ICT resources were unavailability of ICT resources, lack of knowledge and lack of familiarity to ICT. The output of this research is a faculty training program to enhance their know

  12. Tanks Focus Area midyear review report FY00

    International Nuclear Information System (INIS)

    Roeder-Smith, R.D.

    2000-01-01

    In accordance with EM's office of Science and Technology (OST), the TFA is committed to assessing the maturity of technology development projects and ensuring their readiness for implementation and subsequent deployment. The TFA conducts an annual Midyear Review to document the status of ongoing projects, reaffirm and document user commitment to selected projects, and to improve the effective deployment of technology by determining and documenting the readiness of selected projects to move ahead. Since 1995, OST has used a linear technology maturation model that spans through seven defined stages of maturity, from basic research to implementation. Application of this Stage/Gate model to technology development resulted in prescriptive and somewhat cumbersome review procedures, resulting in limited and inconsistent use. Subsequently, in February 2000, OST issued revised guidance in an effort to streamline the technology tracking and review process. While the new OST guidance reinforces peer review requirements and the use of the American Society of Mechanical Engineers (ASME) for independent reviews, it also implements a simplified Gate model. The TFA is now responsible for providing auditable documentation for passing only three stages of technology maturity: ready for research (Gate 0); ready for development (Gate 2); ready for demonstration (Gate 5). The TFA Midyear Review is a key element in the overall review procedure, as the tracking evidence for all active projects is required to be available at this time. While the Midyear Report contains an overview of the status of all TFA reviews and projects, not all the reviews were conducted during the Midyear Review. The TFA used a phased approach to accomplish the Midyear Review requirements

  13. TFA Tanks Focus Area midyear review report FY 2000

    Energy Technology Data Exchange (ETDEWEB)

    LR Roeder-Smith

    2000-05-02

    In accordance with EM's office of Science and Technology (OST), the TFA is committed to assessing the maturity of technology development projects and ensuring their readiness for implementation and subsequent deployment. The TFA conducts an annual Midyear Review to document the status of ongoing projects, reaffirm and document user commitment to selected projects, and to improve the effective deployment of technology by determining and documenting the readiness of selected projects to move ahead. Since 1995, OST has used a linear technology maturation model that spans through seven defined stages of maturity, from basic research to implementation. Application of this Stage/Gate model to technology development resulted in prescriptive and somewhat cumbersome review procedures, resulting in limited and inconsistent use. Subsequently, in February 2000, OST issued revised guidance in an effort to streamline the technology tracking and review process. While the new OST guidance reinforces peer review requirements and the use of the American Society of Mechanical Engineers (ASME) for independent reviews, it also implements a simplified Gate model. The TFA is now responsible for providing auditable documentation for passing only three stages of technology maturity: ready for research (Gate 0); ready for development (Gate 2); ready for demonstration (Gate 5). The TFA Midyear Review is a key element in the overall review procedure, as the tracking evidence for all active projects is required to be available at this time. While the Midyear Report contains an overview of the status of all TFA reviews and projects, not all the reviews were conducted during the Midyear Review. The TFA used a phased approach to accomplish the Midyear Review requirements.

  14. Empowerment of Cancer Survivors Through Information Technology: An Integrative Review.

    Science.gov (United States)

    Groen, Wim G; Kuijpers, Wilma; Oldenburg, Hester Sa; Wouters, Michel Wjm; Aaronson, Neil K; van Harten, Wim H

    2015-11-27

    Patient empowerment may be an effective approach to strengthen the role of cancer survivors and to reduce the burden on health care. However, it is not well conceptualized, notably in oncology. Furthermore, it is unclear to what extent information technology (IT) services can contribute to empowerment of cancer survivors. We aim to define the conceptual components of patient empowerment of chronic disease patients, especially cancer survivors, and to explore the contribution of existing and new IT services to promote empowerment. Electronic databases were searched to identify theoretical and empirical articles regarding empowerment. We extracted and synthesized conceptual components of patient empowerment (ie, attributes, antecedents, and consequences) according to the integrated review methodology. We identified recent IT services for cancer survivors by examining systematic reviews and a proposed inventory of new services, and we related their features and effects to the identified components of empowerment. Based on 26 articles, we identified five main attributes of patient empowerment: (1) being autonomous and respected, (2) having knowledge, (3) having psychosocial and behavioral skills, (4) perceiving support from community, family, and friends, and (5) perceiving oneself to be useful. The latter two were specific for the cancer setting. Systematic reviews of IT services and our additional inventory helped us identify five main categories: (1) educational services, including electronic survivorship care plan services, (2) patient-to-patient services, (3) electronic patient-reported outcome (ePRO) services, (4) multicomponent services, and (5) portal services. Potential impact on empowerment included knowledge enhancement and, to a lesser extent, enhancing autonomy and skills. Newly developed services offer promising and exciting opportunities to empower cancer survivors, for instance, by providing tailored advice for supportive or follow-up care based on

  15. ECO-TOURISM SUSTAINABILITY THROUGH PV TECHNOLOGY: A COMPREHENSIVE REVIEW

    Directory of Open Access Journals (Sweden)

    ARAVIND C. V

    2013-12-01

    Full Text Available Through the Economic Transformation program the Malaysian Government aims to consider tourism as one of the major contributors to the country’s economy and as an industry that imbibe on the principles of environmental responsibility and sustainable development. The growing challenges in the prevention of expansion in agriculture, forestry and aquaculture, and over-exploitation of the natural resources, have made ecotourism extremely popular as a solution for developing tourism sites. Ecotourism attracts many people who wish not only to explore natural wonders but also to protect them for future generations. Most of the ecotourism sites are presumably situated far from the conventional energy resources and thus transporting electricity to those areas are discussed as inefficient and unsustainable. However, solar Photo-voltaic (PV system is clean and alternative energy to suffice the energy demands of eco-tourist sites. This paper puts statements of the energy demand in global and its impact on the traditional fossil fuels and proposes PV as an alternative renewable technology pertaining to the eco-tourism application. The paper especially focuses on solar PV systems which not only could supply the energy demand of tourist sites but can also maintain the image of the ecotourism. A case of a model lodge is used for the study, through the energy demand analysis. A comprehensive review on the PV architecture is presented that derive interest in the implementation of such structure for the case presented.

  16. Technology review of commercial food service equipment - final report

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Market and technical information on gas fired equipment used in the commercial food service sector in Canada and in each province or territory was presented. Results of a market study and technology review were integrated to establish energy consumption and energy saving potential in this sector. Eight categories of commercial cooking appliances were studied. They were: fryers, griddles, broilers, ranges, ovens, tilting skillets, steam kettles and steamers. Focus was on gas fired appliances, although electric appliances were also included. The total energy consumption of the appliances was estimated at 76,140.37 GBtu in 1994. Gas appliances accounted for 63 per cent of the total inventory and consumed 83 per cent of the total energy used. Cooking energy efficiencies for the gas fired commercial cooking equipment ranged from 10 per cent to 60 per cent. The electric appliances had cooking energy efficiencies ranging from 35 per cent to 95 per cent. A list of recommendations were made for the many opportunities to introduce higher efficiency commercial cooking appliances, essential to slow down or to stabilize the energy consumption of cooking appliances over the next decade. 66 refs., 14 tabs., 18 figs.

  17. Technological aspects of horse meat products - A review.

    Science.gov (United States)

    Lorenzo, José M; Munekata, Paulo E S; Campagnol, Paulo Cezar Bastianello; Zhu, Zhenzhou; Alpas, Hami; Barba, Francisco J; Tomasevic, Igor

    2017-12-01

    Horse meat and its products can be considered as a food with a high nutritional value. However, due to cases of economically motivated food adulteration by the intentional addition of horse meat beef products in recent years, horse meat has become a controversial issue. Consumer confidence in meat products and the meat industry has diminished, although consumers consider the differences between the food content and the label as the major issue rather than the safety and nutritional characteristics of horse meat. The elaboration of meat products from horse meat (e.g. "cecina", dry-cured loin, salami, bressaola and pâté) is also an interesting alternative to other traditional meat products such as dry-cured pork hams, pork sausages and liver pâtés. In this review, the technological aspects, safety and storage stability of meat products elaborated from horse meat will be addressed by highlighting the nutritional and sensory aspects of these meat products. We aim to improve the existing knowledge about horse meat in the view of recent scandals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Hemimorphite Ores: A Review of Processing Technologies for Zinc Extraction

    Science.gov (United States)

    Chen, Ailiang; Li, Mengchun; Qian, Zhen; Ma, Yutian; Che, Jianyong; Ma, Yalin

    2016-10-01

    With the gradual depletion of zinc sulfide ores, exploration of zinc oxide ores is becoming more and more important. Hemimorphite is a major zinc oxide ore, attracting much attention in the field of zinc metallurgy although it is not the major zinc mineral. This paper presents a critical review of the treatment for extraction of zinc with emphasis on flotation, pyrometallurgical and hydrometallurgical methods based on the properties of hemimorphite. The three-dimensional framework structure of hemimorphite with complex linkage of its structural units lead to difficult desilicification before extracting zinc in the many metallurgical technologies. It is found that the flotation method is generally effective in enriching zinc minerals from hemimorphite ores into a high-grade concentrate for recovery of zinc. Pure zinc can be produced from hemimorphite or/and willemite with a reducing reagent, like methane or carbon. Leaching reagents, such as acid and alkali, can break the complex structure of hemimorphite to release zinc in the leached solution without generation of silica gel in the hydrometallurgical process. For optimal zinc extraction, combing flotation with pyrometallurgical or hydrometallurgical methods may be required.

  19. Review of the technology for solar gasification of carbonaceous materials

    International Nuclear Information System (INIS)

    Epstein, M.; Spiewak, I.; Funken, K.H.; Ortner, J.

    1994-01-01

    Research has demonstrated the feasibility of solar assisted gasification of carbonaceous materials to form synthesis gas (syngas). The potential feedstocks range from natural gas, residual oil, biomass, and oil-shale to coal. The expected advantages of such processing are yields of syngas with calorific values above those of the carbonaceous feedstocks, syngas quality suited to production of hydrogen, methanol or bulk Fischer-Tropsch fuels, and the ability to process low-grade and waste materials with essentially no emissions to atmosphere other than small amounts of CO 2 . The review provides some background on solar receiver concepts to reach the high temperatures needed for syngas production, the basic chemistry involved, covers applicable experiments that have been reported with solar inputs and with conventional heating, heat transfer processes, process and energy balances, and cost analysis. Approximately 80 references are cited. The authors present their views on the most promising approaches to solar-assisted gasification, the technology development required, and the ultimate benefits of such development and commercialization

  20. Laser assisted drug delivery: a review of an evolving technology.

    Science.gov (United States)

    Sklar, Lindsay R; Burnett, Christopher T; Waibel, Jill S; Moy, Ronald L; Ozog, David M

    2014-04-01

    Topically applied drugs have a relatively low cutaneous bioavailability. This article reviews the existing applications of laser assisted drug delivery, a means by which the permeation of topically applied agents can be enhanced into the skin. The existing literature suggests that lasers are a safe and effective means of enhancing the delivery of topically applied agents through the skin. The types of lasers most commonly studied in regards to drug delivery are the carbon dioxide (CO2 ) and erbium:yttrium-aluminum-garnet (Er:YAG) lasers. Both conventional ablative and fractional ablative modalities have been utilized and are summarized herein. The majority of the existing studies on laser assisted drug delivery have been performed on animal models and additional human studies are needed. Laser assisted drug delivery is an evolving technology with potentially broad clinical applications. Multiple studies demonstrate that laser pretreatment of the skin can increase the permeability and depth of penetration of topically applied drug molecules for both local cutaneous and systemic applications. © 2014 Wiley Periodicals, Inc.