WorldWideScience

Sample records for retorting process kentort

  1. Cyclone oil shale retorting concept. [Use it all retorting process

    Energy Technology Data Exchange (ETDEWEB)

    Harak, A.E.; Little, W.E.; Faulders, C.R.

    1984-04-01

    A new concept for above-ground retorting of oil shale was disclosed by A.E. Harak in US Patent No. 4,340,463, dated July 20, 1982, and assigned to the US Department of Energy. This patent titled System for Utilizing Oil Shale Fines, describes a process wherein oil shale fines of one-half inch diameter and less are pyrolyzed in an entrained-flow reactor using hot gas from a cyclone combustor. Spent shale and supplemental fuel are burned at slagging conditions in this combustor. Because of fines utilization, the designation Use It All Retorting Process (UIARP) has been adopted. A preliminary process engineering design of the UIARP, analytical tests on six samples of raw oil shale, and a preliminary technical and economic evaluation of the process were performed. The results of these investigations are summarized in this report. The patent description is included. It was concluded that such changes as deleting air preheating in the slag quench and replacing the condenser with a quench-oil scrubber are recognized as being essential. The addition of an entrained flow raw shale preheater ahead of the cyclone retort is probably required, but final acceptance is felt to be contingent on some verification that adequate reaction time cannot be obtained with only the cyclone, or possibly some other twin-cyclone configuration. Sufficient raw shale preheating could probably be done more simply in another manner, perhaps in a screw conveyor shale transporting system. Results of the technical and economic evaluations of Jacobs Engineering indicate that further investigation of the UIARP is definitely worthwhile. The projected capital and operating costs are competitive with costs of other processes as long as electric power generation and sales are part of the processing facility.

  2. Investigation of the geokinetics horizontal in situ oil shale retorting process. Quarterly report, April, May, June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Hutchinson, D.L.

    1980-08-01

    The Retort No. 18 burn was terminated on May 11, 1980. A total of 5547 barrels of shale oil or 46 percent of in-place resource was recovered from the retort. The EPA-DOE/LETC post-burn core sampling program is underway on Retort No. 16. Eleven core holes (of 18 planned) have been completed to date. Preliminary results indicate excellent core recovery has been achieved. Recovery of 702 ft of core was accomplished. The Prevention of Significant Deterioration (PSD) permit application was submitted to the EPA regional office in Denver for review by EPA and Utah air quality officials. The application for an Underground Injection Control (UIC) permit to authorize GKI to inject retort wastewater into the Mesa Verde Formation is being processed by the State of Utah. A hearing before the Board of Oil, Gas and Mining is scheduled in Salt Lake City, Utah, for July 22, 1980. Re-entry drilling on Retort No. 24 is progressing and placement of surface equipment is underway. Retort No. 25 blasthole drilling was completed and blast preparations are ongoing. Retort No. 25 will be blasted on July 18, 1980. The retort will be similar to Retort No. 24, with improvements in blasthole loading and detonation. US Patent No. 4,205,610 was assigned to GKI for a shale oil recovery process. Rocky Mountain Energy Company (RME) is evaluating oil shale holdings in Wyoming for application of the GKI process there.

  3. Investigation of the geokinetics horizontal in situ oil shale retorting process. Quarterly report, October, November, December 1983

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, K.B.

    1984-03-01

    Retort No. 27 was ignited on August 11, 1983 and by December 31 had completed 139 days of operation and produced 11,420 barrels of oil. Retort No. 28 was ignited on October 18, 1983 and on December 31 had completed 74 days of operation and produced 5,285 barrels of oil. The off-gas processing plants for the two retorts was completed and put through a shakedown run. Concentration levels of H/sub 2/S and NH/sub 3/ in the retort off gas did not warrant plant operation in the fourth quarter. Environmental studies are reported.

  4. Energy and process substitution in the frozen-food industry: geothermal energy and the retortable pouch

    Energy Technology Data Exchange (ETDEWEB)

    Stern, M.W.; Hanemann, W.M.; Eckhouse, K.

    1981-12-01

    An assessment is made of the possibilities of using geothermal energy and an aseptic retortable pouch in the food processing industry. The focus of the study is on the production of frozen broccoli in the Imperial Valley, California. Background information on the current status of the frozen food industry, the nature of geothermal energy as a potential substitute for conventional fossil fuels, and the engineering details of the retortable pouch process are covered. The analytical methodology by which the energy and process substitution were evaluated is described. A four-way comparison of the economics of the frozen product versus the pouched product and conventional fossil fuels versus geothermal energy was performed. A sensitivity analysis for the energy substitution was made and results are given. Results are summarized. (MCW)

  5. Lethality of Rendang packaged in multilayer retortable pouch with sterilization process

    Science.gov (United States)

    Praharasti, A. S.; Kusumaningrum, A.; Frediansyah, A.; Nurhikmat, A.; Khasanah, Y.; Suprapedi

    2017-01-01

    Retort Pouch had become a choice to preserve foods nowadays, besides the used of the can. Both had their own advantages, and Retort Pouch became more popular for the reason of cheaper and easier to recycle. General Method usually used to estimate the lethality of commercial heat sterilization process. Lethality value wa s used for evaluating the efficacy of the thermal process. This study aimed to find whether different layers of pouch materials affect the lethality value and to find differences lethality in two types of multilayer retort pouch, PET/Aluminum Foil/Nylon/RCPP and PET/Nylon/Modified Aluminum/CPP. The result showed that the different layer arrangement was resulted different Sterilization Value (SV). PET/Nylon/Modified Aluminum/CPP had better heat penetration, implied by the higher value of lethality. PET/Nylon/Modified Aluminum/CPP had the lethality value of 6,24 minutes, whereas the lethality value of PET/Aluminum Foil/Nylon/RCPP was 3,54 minutes.

  6. Optimization of processing conditions for the sterilization of retorted short-rib patties using the response surface methodology.

    Science.gov (United States)

    Choi, Su-Hee; Cheigh, Chan-Ick; Chung, Myong-Soo

    2013-05-01

    The aim of this study was to determine the optimum sterilization conditions for short-rib patties in retort trays by considering microbiological safety, nutritive value, sensory characteristics, and textural properties. In total, 27 sterilization conditions with various temperatures, times, and processing methods were tested using a 3(3) factorial design. The response surface methodology (RSM) and contour analysis were applied to find the optimum sterilization conditions for the patties. Quality attributes were significantly affected by the sterilization temperature, time, and processing method. From RSM and contour analysis, the final optimum sterilization condition of the patties that simultaneously satisfied all specifications was determined to be 119.4°C for 18.55min using a water-cascading rotary mode. The findings of the present study suggest that using optimized sterilization conditions will improve the microbial safety, sensory attributes, and nutritional retention for retorted short-rib patties.

  7. Environmental research plan for the Geokinetics Inc. investigation of the horizontal in situ oil shale retorting process

    Energy Technology Data Exchange (ETDEWEB)

    Spradlin, H.K.L.; Hutchinson, D.L.; Mankowski, S.G.

    1979-11-30

    The development of a horizontal in-situ retorting process may have significant impacts upon valuable environmental resources. A research program has been developed to identify, assess, and minimize the adverse environmental impacts which may result. The goals are to: describe the environment as it existed prior to disturbance; determine the nature and extent of the changes; develop and implement measures to minimize the adverse impacts; develop and implement reclamation procedures which will return the affected land to its original level; and coordinate measures to protect the health and safety of persons and animals which may be affected by the activities. Specific research areas are outlined. These include atmospheric, hydrologic, terrestrial ecology, and social/economic research. (DMC)

  8. Advanced retorting, microwave assisted thermal sterilization (MATS), and pressure assisted thermal sterilization (PATS) to process meat products.

    Science.gov (United States)

    Barbosa-Cánovas, Gustavo V; Medina-Meza, Ilce; Candoğan, Kezban; Bermúdez-Aguirre, Daniela

    2014-11-01

    Conventional thermal processes have been very reliable in offering safe sterilized meat products, but some of those products are of questionable overall quality. Flavor, aroma, and texture, among other attributes, are significantly affected during such processes. To improve those quality attributes, alternative approaches to sterilizing meat and meat products have been explored in the last few years. Most of the new strategies for sterilizing meat products rely on using thermal approaches, but in a more efficient way than in conventional methods. Some of these emerging technologies have proven to be reliable and have been formally approved by regulatory agencies such as the FDA. Additional work needs to be done in order for these technologies to be fully adopted by the food industry and to optimize their use. Some of these emerging technologies for sterilizing meat include pressure assisted thermal sterilization (PATS), microwaves, and advanced retorting. This review deals with fundamental and applied aspects of these new and very promising approaches to sterilization of meat products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Oil shale mining cost analysis. Volume I. Surface retorting process. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Resnick, B.S.; English, L.M.; Metz, R.D.; Lewis, A.G.

    1981-01-01

    An Oil Shale Mining Economic Model (OSMEM) was developed and executed for mining scenarios representative of commercially feasible mining operations. Mining systems were evaluated for candidate sites in the Piceance Creek Basin. Mining methods selected included: (1) room-and-pillar; (2) chamber-and-pillar, with spent shale backfilling; (3) sublevel stopping; and (4) sublevel stopping, with spent shale backfilling. Mines were designed to extract oil shale resources to support a 50,000 barrels-per-day surface processing facility. Costs developed for each mining scenario included all capital and operating expenses associated with the underground mining methods. Parametric and sensitivity analyses were performed to determine the sensitivity of mining cost to changes in capital cost, operating cost, return on investment, and cost escalation.

  10. 牛蒡花生软罐头的加工工艺%Study on Processing Technology of Arctium lappa L.and Peanut Retort Pouch

    Institute of Scientific and Technical Information of China (English)

    曹雪慧; 王奔

    2011-01-01

    Using Arctium lappa L. and peanut as materials, the processing technology of retort pouch is studied.The results show that the better color protective condition is immersing Arctium lappa L. in 0.5% of citrate, 1.5% of salt, and 0.2% of CaCl2. The optimal formula is consisted of 1.5% of sucrose, 0.2% of monosodium glutamate,3% of salt, and 1.2% of yellow wine based on the orthogonal test. The Arctium lappa L and peanut retort pouch with rich nutrition and unique taste can be achieved after being sterilized 10′-30′- 10′/121℃ and cooling at reverse -pressure at 0.12MPa.%以牛蒡和花生为原料,对软罐头生产的工艺进行研究,结果表明:采用柠檬酸0.5%、食盐1.5%、CaCl20.2%的复合护色剂对牛蒡有较好护色效果,通过正交试验得出最佳的汤汁配比为白砂糖1.5%,味精0.2%,食盐3%,黄酒1.2%,经10′-30′-10′/121℃,反压0.12 MPa杀菌处理后,可生产出营养丰富,口感独特的牛蒡花生软罐头.

  11. Oil shale project run summary for small retort Run S-10

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, F.J.; Sandholtz, W.A.; Raley, J.H.; Laswell, B.H. (eds.)

    1978-06-01

    A combustion run using sidewall heaters to control heat loss and computer control to set heater power were conducted to study the effectiveness of the heater control system, compare results with a one-dimensional retort model when radial heat loss is not significant, and determine effects of recycling off-gas to the retort (by comparison with future runs). It is concluded that adequate simulation of in-situ processing in laboratory retorts requires control of heat losses. (JRD)

  12. 油页岩干馏工艺积碳特性正交分析%Oil Shale Retorting Process Characteristic Orthogonal Carbon Analysis

    Institute of Scientific and Technical Information of China (English)

    柏静儒; 许伟; 潘朔; 张本熙

    2015-01-01

    To evaluate coking behavior of oil shale full cycle carbonization process,we established the experi-mental table independently. Determining that propylene is the main matrix coking among various of organic ga-ses of retorting gas of oil shale based on self-building experiment table and gas chromatography. I selected pro-pylene as carbon source to analysis the phenomenon of coking in different cases ( reaction time/wall tempera-ture/gas flow rate) . Coke amount increased with the longer reaction time and higher wall temperature ( under 800 ℃) ,Coke amount continuous increased with the increasing of gas flow rate until the gas flow rate reached 30 mL·min-1 meeting a sudden decrease. According to the result of experiments,the influence degree of co-king behavior by different cases is as follows:reaction time> gas flow rate > wall temperature.%通过自建实验台模拟瓦斯全循环油页岩干馏工艺并进行积碳实验,利用气相色谱仪对积碳反应前后瓦斯气组分性质进行分析。使用丙烯为碳源气,观察不同工况下(反应时间、壁面温度、气体流量)的积碳现象。结果表明:瓦斯气中主要积碳母体为烯烃,含量最高为丙烯。积碳量随反应时间和壁面温度(800℃以下)的增加而增加,随气体流量的增加而变化,流量达到30 mL·min-1后积碳量开始减少。各工况对积碳现象的影响程度依次是反应时间>气体流量>壁面温度。

  13. Heat transfer simulation and retort program adjustment for thermal processing of wheat based Haleem in semi-rigid aluminum containers.

    Science.gov (United States)

    Vatankhah, Hamed; Zamindar, Nafiseh; Shahedi Baghekhandan, Mohammad

    2015-10-01

    A mixed computational strategy was used to simulate and optimize the thermal processing of Haleem, an ancient eastern food, in semi-rigid aluminum containers. Average temperature values of the experiments showed no significant difference (α = 0.05) in contrast to the predicted temperatures at the same positions. According to the model, the slowest heating zone was located in geometrical center of the container. The container geometrical center F0 was estimated to be 23.8 min. A 19 min processing time interval decrease in holding time of the treatment was estimated to optimize the heating operation since the preferred F0 of some starch or meat based fluid foods is about 4.8-7.5 min.

  14. Rapid Retort Processing of Eggs

    Science.gov (United States)

    2006-12-04

    Vegetable Oil 5.5 0.0 Liquid Margarine 3.000 2.981 Modified waxy maize Pre-gelatinized instant starch 2.0 0.0 Salt...known as insoluble yolk globules that are only disrupted at high concentrations of salt or urea . Free floating granules are smaller than YS, having a

  15. Evaluation of oil shale from Eastern Canada by retorting and by concentration of a kerogen-rich fraction. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.W.; Abbott, D.

    1981-12-16

    An apparatus was developed for testing the retorting behaviour of oil shales under pressures up to 500 psi hydrogen and 700/sup 0/C. Equipment was also constructed and brought into service for the determination of oil yields by the Fischer assay method. Six samples of Albert shale of varying oil content (<10 to 40-50 gals/ton) were tested by the Fischer method and by hydrogen retorting to determine yields of liquid distillate under different conditions of retorting. The Fischer assays gave oil yields of 2.9 to 47.5 gals/ton which corresponded to carbon conversion of 50.5 to 87.8 per cent. The hydrogen retorting tests at 700/sup 0/C and 500/sup 0/C gave carbon conversion rates of 53 to 87 per cent which are comparable to that for the Fischer retorting. Retorting at 500/sup 0/C gave oil yields similar to the Fischer assay but at 700/sup 0/C oil yields were reduced, 4 to 30 gals/ton, although gas yields increased. In the retorting tests performed, the use of hydrogen at 500 psi did not increase yields. More work is needed to understand the retorting behaviour of New Brunswick and other Canadian oil shales. Retorting tests for resource assessment purposes are also needed. These should be coupled to determining the rate of carbon conversion and hence the effectiveness of the retorting technique. Petrographic, chemical and thermogravimetric analyses of the oil shales were undertaken to characterize the materials for retorting tests. The second part of the project involved producing a kerogen concentrate by standard beneficiation methods, spherical agglomeration, gravity methods and by flotation. Only gravity separation showed promise of being a viable industrial process. Fine grinding and gravity separation gave high concetrations up to 70 gals/ton but yields were low. 11 figs., 13 tabs.

  16. Oil shale project: run summary for small retort Run S-11

    Energy Technology Data Exchange (ETDEWEB)

    Sandholtz, W.A.; Ackerman, F.J.; Bierman, A.; Kaehler, M.; Raley, J.; Laswell, B.H.; Tripp, L.J. (eds.)

    1978-06-01

    Results are reported on retort run S-11 conducted to observe the effects of combustion retorting with undiluted air at relatively rapid burn (retorting) rates and to provide a base case for retorting small uniform shale (Anvil Points master batch -2.5 +- 1.3 cm) with undiluted air. It was found that a 0.6 m/sup 3//m/sup 2//minute superficial gas velocity gave an average rate of propagation of the combustion peak of about 2.7 m/day and an average maximum temperature on the centerline of the rubble bed of 1003/sup 0/C. Oil yield was 93 percent of Fischer assay. For small uniform shale particles (-2.5 + 1.3 cm) it is concluded that only small losses in yield (92 percent vs 96 percent in Run S-10) result from high retorting rates. Maximum temperature considerations preclude going to higher rates with undiluted air. Without diluent, a larger air flux would give excessive bed temperatures causing rock melting and potential closure to gas flow. In experimental retorts, another problem of excessive temperatures is potential damage to metal walls and in-situ sensors. No advantage is seen to using recycled off-gas as a combustion gas diluent. Inert diluents (e.g. nitrogen or steam) may be necessary for process control, but the fuel values in the off-gas should best be used for energy recovery rather than burned in the retort during recycle. Another consideration from model calculations is that the use of recycle gas containing fuel components retards the retorting rate and so is undesirable. No further recycle experiments are planned as the results of this run proved satisfactory.

  17. 油页岩干馏厂污水处理工艺的设计%Design and Application of Wastewater Treatment Process in Oil Shale Retorting Plant

    Institute of Scientific and Technical Information of China (English)

    上官中华; 李魏山; 王铮

    2013-01-01

    Oil shale retort wastewater is characterized by high concentrations of organic compounds, ammonia nitrogen and oils, many types of pollutants and refractory degradation. This type of wastewater was designed to be pretreated separately, and the stripper was used to reduce ammonia nitrogen to below 200 mg/L and oil to below 20 mg/L. The treated wastewater was mixed with domestic sewage for biochemical treatment. The final effluent quality met the first class criteria specified in the Integrated Wastewater Discharge Standard ( GB 8978 - 1996).%针对某污水处理站油页岩干馏废水中有机物浓度高、氨氮高、含油量高、污染物种类多、难降解的特性,设计对该部分生产废水单独做预处理,使动植物油降到20 mg/L以下,然后采用氨吹脱塔去除氨氮,使出水氨氮降到200 mg/L以下,而后再与生活污水混合后进行生化处理,出水水质达到《污水综合排放标准》(GB 8978-1996)的一级标准,其经验值得推广借鉴.

  18. Evaluation of physical-chemical and biological treatment of shale oil retort water

    Energy Technology Data Exchange (ETDEWEB)

    Mercer, B.W.; Mason, M.J.; Spencer, R.R.; Wong, A.L.; Wakamiya, W.

    1982-09-01

    Bench scale studies were conducted to evaluate conventional physical-chemical and biological treatment processes for removal of pollutants from retort water produced by in situ shale oil recovery methods. Prior to undertaking these studies, very little information had been reported on treatment of retort water. A treatment process train patterned after that generally used throughout the petroleum refining industry was envisioned for application to retort water. The treatment train would consist of processes for removing suspended matter, ammonia, biodegradable organics, and nonbiodegradable or refractory organics. The treatment processes evaluated include anaerobic digestion and activated sludge for removal of biodegradable organics and other oxidizable substances; activated carbon adsorption for removal of nonbiodegradable organics; steam stripping for ammonia removal; and chemical coagulation, sedimentation and filtration for removal of suspended matter. Preliminary cost estimates are provided.

  19. Water Usage for In-Situ Oil Shale Retorting – A Systems Dynamics Model

    Energy Technology Data Exchange (ETDEWEB)

    Earl D. Mattson; Larry Hull; Kara Cafferty

    2012-12-01

    A system dynamic model was construction to evaluate the water balance for in-situ oil shale conversion. The model is based on a systems dynamics approach and uses the Powersim Studio 9™ software package. Three phases of an insitu retort were consider; a construction phase primarily accounts for water needed for drilling and water produced during dewatering, an operation phase includes the production of water from the retorting process, and a remediation phase water to remove heat and solutes from the subsurface as well as return the ground surface to its natural state. Throughout these three phases, the water is consumed and produced. Consumption is account for through the drill process, dust control, returning the ground water to its initial level and make up water losses during the remedial flushing of the retort zone. Production of water is through the dewatering of the retort zone, and during chemical pyrolysis reaction of the kerogen conversion. The major water consumption was during the remediation of the insitu retorting zone.

  20. Combat Ration Network for Technology Implementation. Retort Racks for Polymeric Trays in 1400 Style Spray Retorts

    Science.gov (United States)

    2003-05-01

    trays backup plate & support pillars to allow 35" shut height as required by most 3500 ton molding machines dedicated mounting rails for installation...hr. At this time, Stegner had modified all their pallet bottom plates to support the rack in all load bearing points and in addition, Wornick send two...COMBAT RATION NETWORK FOR TECHNOLOGY IMPLEMENTATION Retort Racks for Polymeric Trays in 1400 Style Spray Retorts Final Technical Report STP 2010

  1. Documentation of INL’s In Situ Oil Shale Retorting Water Usage System Dynamics Model

    Energy Technology Data Exchange (ETDEWEB)

    Earl D Mattson; Larry Hull

    2012-12-01

    A system dynamic model was construction to evaluate the water balance for in-situ oil shale conversion. The model is based on a systems dynamics approach and uses the Powersim Studio 9™ software package. Three phases of an in situ retort were consider; a construction phase primarily accounts for water needed for drilling and water produced during dewatering, an operation phase includes the production of water from the retorting process, and a remediation phase water to remove heat and solutes from the subsurface as well as return the ground surface to its natural state. Throughout these three phases, the water is consumed and produced. Consumption is account for through the drill process, dust control, returning the ground water to its initial level and make up water losses during the remedial flushing of the retort zone. Production of water is through the dewatering of the retort zone, and during chemical pyrolysis reaction of the kerogen conversion. The document discusses each of the three phases used in the model.

  2. Double Retort System for Materials Compatibility Testing

    Energy Technology Data Exchange (ETDEWEB)

    V. Munne; EV Carelli

    2006-02-23

    With Naval Reactors (NR) approval of the Naval Reactors Prime Contractor Team (NRPCT) recommendation to develop a gas cooled reactor directly coupled to a Brayton power conversion system as the Space Nuclear Power Plant (SNPP) for Project Prometheus (References a and b) there was a need to investigate compatibility between the various materials to be used throughout the SNPP. Of particular interest was the transport of interstitial impurities from the nickel-base superalloys, which were leading candidates for most of the piping and turbine components to the refractory metal alloys planned for use in the reactor core. This kind of contamination has the potential to affect the lifetime of the core materials. This letter provides technical information regarding the assembly and operation of a double retort materials compatibility testing system and initial experimental results. The use of a double retort system to test materials compatibility through the transfer of impurities from a source to a sink material is described here. The system has independent temperature control for both materials and is far less complex than closed loops. The system is described in detail and the results of three experiments are presented.

  3. Hot gas stripping of ammonia and carbon dioxide from simulated and actual in situ retort waters

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C.L.

    1979-01-01

    This study proved that ammonia and carbon dioxide could be removed from retort water by hot gas stripping and that overall transfer rates were slower than for physical desorption alone. The ammonia in solution complexed with the carbonate species with the result that the CO/sub 2/ transfer rates were linked to the relatively slower desorption of NH/sub 3/ from solution. Ionic reactions in the liquid phase limited the quantity of free NH/sub 3/ and CO/sub 2/, thus decreasing the driving forces for mass transfer. The retort water exhibited foaming tendencies that affected the interfacial area which should be taken into account if a stripping tower is considered on a larger scale. Transfer unit heights were calculated for the process conditions studied and correlated such that scaleup to increased capacities is possible.

  4. Morphology of retorted oil shale particles

    Energy Technology Data Exchange (ETDEWEB)

    Adams, D.C.; Mahajan, O.P.

    The formation of two distinct coked particle morphotypes, namely exfoliated and peripheral, during oil shale retorting and their implications toward the coking mechanism are discussed. Rapid heating causes swelling, exfoliation, and formation of a matrix of veinlets and cracks; these changes lead to uniform coking within the particle body. In contrast, slow heating produces the peripheral morphotype with a low coke density at the center and a high coke density at the periphery. The difference in the coking morphology of the two particle types has been explained on the basis of kerogen pyrolysis kinetics. Of the two morphotypes, peripheral coke makes the particles stronger and more resistant to size attrition. In addition to the formation of coke in the particle body of the two morphotypes, coke is also formed on the outer surface of both the particle types. It has been concluded that more coke is produced from the secondary decomposition reactions than directly from the kerogen itself. 25 references, 8 figures.

  5. Assessment of the long-term stability of retort pouch foods to support extended duration spaceflight.

    Science.gov (United States)

    Catauro, Patricia M; Perchonok, Michele H

    2012-01-01

    To determine the suitability of retort processed foods to support long-duration spaceflight, a series of 36-mo accelerated shelf life studies were performed on 13 representative retort pouch products. Combined sensory evaluations, physical properties assessments, and nutritional analyses were employed to determine shelf life endpoints for these foods, which were either observed during the analysis or extrapolated via mathematical projection. Data obtained through analysis of these 13 products were later used to estimate the shelf life values of all retort-processed spaceflight foods. In general, the major determinants of shelf life appear to be the development of off-flavor and off-color in products over time. These changes were assumed to be the result of Maillard and oxidation reactions, which can be initiated or accelerated as a result of the retort process and product formulation. Meat products and other vegetable entrées are projected to maintain their quality the longest, between 2 and 8 y, without refrigeration. Fruit and dessert products (1.5 to 5 y), dairy products (2.5 to 3.25 y), and starches, vegetable, and soup products (1 to 4 y) follow. Aside from considerable losses in B and C vitamin content, nutritional value of most products was maintained throughout shelf life. Fortification of storage-labile vitamins was proposed as a countermeasure to ensure long-term nutritive value of these products. The use of nonthermal sterilization technologies was also recommended, as a means to improve initial quality of these products and extend their shelf life for use in long-duration missions. Data obtained also emphasize the importance of low temperature storage in maintaining product quality. Retort sterilized pouch products are garnering increased commercial acceptance, largely due to their improved convenience and quality over metal-canned products. Assessment of the long-term stability of these products with ambient storage can identify potential areas for

  6. Effects of retorting factors on combustion properties of shale char. 3. Distribution of residual organic matters.

    Science.gov (United States)

    Han, Xiangxin; Jiang, Xiumin; Cui, Zhigang; Liu, Jianguo; Yan, Junwei

    2010-03-15

    Shale char, formed in retort furnaces of oil shale, is classified as a dangerous waste containing several toxic compounds. In order to retort oil shale to produce shale oil as well as treat shale char efficiently and in an environmentally friendly way, a novel kind of comprehensive utilization system was developed to use oil shale for shale oil production, electricity generation (shale char fired) and the extensive application of oil shale ash. For exploring the combustion properties of shale char further, in this paper organic matters within shale chars obtained under different retorting conditions were extracted and identified using a gas chromatography-mass spectrometry (GC-MS) method. Subsequently, the effects of retorting factors, including retorting temperature, residence time, particle size and heating rate, were analyzed in detail. As a result, a retorting condition with a retorting temperature of 460-490 degrees C, residence time of circulating fluidized bed technology with fractional combustion.

  7. Assessment of TAMU Rack Material in Poly Tray Racks using Spray Retort

    Science.gov (United States)

    2009-07-01

    necessary perforated plates for their production retort pallets to support the racks in all the load bearing points, temperature distribution were...Characterization New Rack – Loaded with Polymeric Half Steam Table Tray – One Pallet Retorted @ 260 F for 60 min (2 times) – Test for Rack Sag – Drop Test – 2...dimension and weight. Rutgers will supply adequate number of polymeric trays for this test. A single pallet load will be retorted at 260 F for 60

  8. Ignition technique for an in situ oil shale retort

    Science.gov (United States)

    Cha, Chang Y.

    1983-01-01

    A generally flat combustion zone is formed across the entire horizontal cross-section of a fragmented permeable mass of formation particles formed in an in situ oil shale retort. The flat combustion zone is formed by either sequentially igniting regions of the surface of the fragmented permeable mass at successively lower elevations or by igniting the entire surface of the fragmented permeable mass and controlling the rate of advance of various portions of the combustion zone.

  9. 30 CFR 57.22401 - Underground retorts (I-A and I-B mines).

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Underground retorts (I-A and I-B mines). 57... METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in Metal and Nonmetal Mines Underground Retorts § 57.22401...

  10. Acid mine drainage potential of raw, retorted, and combusted Eastern oil shale: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, P.J.; Yelton, J.L.; Reddy, K.J.

    1987-09-01

    In order to manage the oxidation of pyritic materials effectively, it is necessary to understand the chemistry of both the waste and its disposal environment. The objective of this two-year study was to characterize the acid production of Eastern oil shale waste products as a function of process conditions, waste properties, and disposal practice. Two Eastern oil shales were selected, a high pyrite shale (unweathered 4.6% pyrite) and a low pyrite shale (weathered 1.5% pyrite). Each shale was retorted and combusted to produce waste products representative of potential mining and energy conversion processes. By using the standard EPA leaching tests (TCLP), each waste was characterized by determining (1) mineralogy, (2) trace element residency, and (3) acid-base account. Characterizing the acid producing potential of each waste and potential trace element hazards was completed with laboratory weathering studies. 32 refs., 21 figs., 12 tabs.

  11. Development of retort porch bovine runnet%牛百叶软罐头的研制

    Institute of Scientific and Technical Information of China (English)

    吴红棉; 董萍; 洪鹏志

    2001-01-01

    以牛百叶为原料,以PET/AL/PP复合蒸煮袋作包装材料,经原料处理、预煮、油炸、浸汤、真空封口、杀菌等工序,制得牛百叶软罐头。研究了各工序中的最佳工艺条件及不同的复合材料包装袋对制品质量的影响。%A PET/AL/PP packed retort porch bovine runnet was d eveloped bypretreatment,precooking,frying,soaking,vacuum packaging and steriliz ation. The effects of processing parameters and packaging materials on the quali ty of the product were studied.

  12. Source characterization studies at the Paraho semiworks oil shale retort. [Redistribution of trace and major elements

    Energy Technology Data Exchange (ETDEWEB)

    Fruchter, J.S.; Wilkerson, C.L.; Evans, J.C.; Sanders, R.W.; Abel, K.W.

    1979-05-01

    In order to determine the redistribution of trace and major elements and species during aboveground oil shale retorting, a comprehensive program was carried out for the sampling and analysis of feedstock, products, effluents, and ambient particulates from the Paraho Semiworks Retort. Samples were obtained during two periods in 1977 when the retort was operating in the direct mode. The data were used to construct mass balances for 31 trace and major elements in various effluents, including the offgas. The computed mass balances indicated that approx. 1% or greater fractions of the As, Co, Hg, N, Ni, S, and Se were released during retorting and redistributed to the product oil, retort water, or product offgas. The fraction released for these seven elements ranged from approx. 1% for Co and Ni to 50 to 60% for Hg and N. Approximately 20% of the S and 5% each of the As and Se were released. Ambient aerosols were found to be elevated near the retorting facility and associated crushing and retorted shale disposal sites. Approximately 50% of these particles were in the respirable range (< 5 ..mu..m). The elevated dust loadings are presented very local, as indicated by relatively low aerosol loadings at background sites 100 to 200 m away. State-of-the-art dust control measures were not employed. 15 figures, 19 tables.

  13. 9 CFR 318.306 - Processing and production records.

    Science.gov (United States)

    2010-01-01

    ....306 Section 318.306 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... Canning and Canned Products § 318.306 Processing and production records. At least the following processing... the first can enters and the time the last can exits the retort. The retort or reel speed shall...

  14. An Economic and Ecologic Comparison of the Nuclear Stimulation of Natural Gas Fields with Retorting of Oil Shale

    Science.gov (United States)

    1975-06-06

    a completely different system of retorting. Unlike the gas-combustion retorts, the TOSCO II is a rotary type retort that uses hot ceramic balls to... kilns and smelters are designed to do the nonvolatile solid such as iron, copper, or lime. This is the mining technique envisioned in most shale...burned. Such heating also con- verts -ome of the other minerals to their oxide forms and the resulting ash has be»n described as a low grade of cement

  15. Occidental vertical modified in situ process for the recovery of oil from oil shale, Phase 2. Construction, operation, testing, and environmental impact. Final report, August 1981-December 1982. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, A.L.; Zahradnik, R.L.; Kaleel, R.J.

    1984-01-01

    Occidential Oil Shale, Inc. (OOSI) recently completed the demonstration of mining, rubblization, ignition, and simulataneous processing of two commericalized modified in situ (MIS) retorts at the Logas Wash facility near DeBeque, Colorado. Upon completion of Retort 6 in 1978, Occidential began incorporating all of the knowledge previously acquired in an effort to design two more commercial-sized MIS retorts. Any commercial venture of the future would require the ability to operate simultaneously more than one retort. Thus, Retorts 7 and 8 were developed during 1980 and 1981 through joint funding of the DOE and OOSI in Phase II. Rubblization of the retorts produced an average rubble void of 18.5% in the low grade shale (17 gallons per ton) at the Logan Wash site. After rubblization, bulkheads were constructed, inlet and offgas pipes were installed and connected to surface processing facilities and liquid product handling systems were connected to the retorts. Extensive instrumentation was installed in cooperation with Sandia National Laboratories for monitoring the complete operation of the retorts. After pre-ignition testing, Retort 8 was ignited in December of 1981 and Retort 7 was ignited in January of 1982. The retorts were operated without interruption from ignition until mid- November of 1982 at which time inlet gas injection was terminated and water quenching was begun. Total product yield from the two retorts was approximately 200,000 barrels of oil, or 70% of the Fischer Assay oil-in-place in the rubblized rock in the two retrots. Water quenching studies were conducted over a period of several months, with the objective of determining the rate of heat extraction from the retorts as well as determining the quantity and quality of offgas and water coming out from the quenching process. Data from these studies are also included in this Summary Report. 62 figs., 18 tabs.

  16. Fluidized-bed retorting of Colorado oil shale: Topical report. [None

    Energy Technology Data Exchange (ETDEWEB)

    Albulescu, P.; Mazzella, G.

    1987-06-01

    In support of the research program in converting oil shale into useful forms of energy, the US Department of Energy is developing systems models of oil shale processing plants. These models will be used to project the most attractive combination of process alternatives and identify future direction for R and D efforts. With the objective of providing technical and economic input for such systems models, Foster Wheeler was contracted to develop conceptual designs and cost estimates for commercial scale processing plants to produce syncrude from oil shales via various routes. This topical report summarizes the conceptual design of an integrated oil shale processing plant based on fluidized bed retorting of Colorado oil shale. The plant has a nominal capacity of 50,000 barrels per operating day of syncrude product, derived from oil shale feed having a Fischer Assay of 30 gallons per ton. The scope of the plant encompasses a grassroots facility which receives run of the mine oil shale, delivers product oil to storage, and disposes of the processed spent shale. In addition to oil shale feed, the battery limits input includes raw water, electric power, and natural gas to support plant operations. Design of the individual processing units was based on non-confidential information derived from published literature sources and supplemented by input from selected process licensors. The integrated plant design is described in terms of the individual process units and plant support systems. The estimated total plant investment is similarly detailed by plant section and an estimate of the annual operating requirements and costs is provided. In addition, the process design assumptions and uncertainties are documented and recommendations for process alternatives, which could improve the overall plant economics, are discussed.

  17. Gamma 60Co-irradiation of organic matter in the Phosphoria Retort Shale

    Science.gov (United States)

    Lewan, M. D.; Ulmishek, G. F.; Harrison, W.; Schreiner, F.

    1991-04-01

    Irradiation experiments were conducted on a thermally immature rock sample of the Phosphoria Retort Shale and its isolated kerogen. A 60Co-source for gamma radiation was employed at dosages ranging from 81 to 885 Mrads, which are attainable by Paleozoic and Precambrian black shales with syngenetic uranium enrichments. Kerogen elemental, isotopic, and pyrolysate compositions are not affected at these dosages, but the bitumens extracted from the irradiated rock are affected. The major effects are reductions in the amounts of bitumen, acyclic isoprenoids, and high-molecular weight acyclic carboxylic acids. Natural differences in the amounts of bitumen and acyclic isoprenoid due to regional and stratigraphie variations in organic source input and depositional conditions make the radiation-induced reductions in these parameters difficult to use as indicators of natural radiation damage in black shales. However, the preferential reduction in the high-molecular weight acyclic carboxylic acids, which are ubiquitous in the living precursory organic matter, is diagnostic of experimental γ-irradiation but may not be diagnostic of natural irradiation. The overall process associated with radiation damage is polymerization by cross-linking through a free radical mechanism. As a result, irradiation of organic matter in black shales is more likely to retard rather than enhance petroleum generation.

  18. Development of RM-1 type coated electrode for reducing retorts in magnesium refining

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    According to the working condition of high temperature oxidation and sulphidation corrosion of the ZG35Cr24Ni7SiN heat-resisting stainless steel used for reducing retort in magnesium refining, and the practical situation which the weld metal between the body and cover of reducing retort must possess resisting high temperature oxidation and corrosion, a kind of RM-1 type coated electrode for reducing retorts in magnesium refining with special alloying system and excellent usability has been developed. The RM-1 coated electrode is made of H0Cr21Ni10 wire core and is alloyed chromium and nickel simultaneously through coating material and wire core and some rare-earth oxides are added in coating material. The electrode has been verified to be satisfied the operation requirements of practical production.

  19. Method for forming an in situ oil shale retort with horizontal free faces

    Science.gov (United States)

    Ricketts, Thomas E.; Fernandes, Robert J.

    1983-01-01

    A method for forming a fragmented permeable mass of formation particles in an in situ oil shale retort is provided. A horizontally extending void is excavated in unfragmented formation containing oil shale and a zone of unfragmented formation is left adjacent the void. An array of explosive charges is formed in the zone of unfragmented formation. The array of explosive charges comprises rows of central explosive charges surrounded by a band of outer explosive charges which are adjacent side boundaries of the retort being formed. The powder factor of each outer explosive charge is made about equal to the powder factor of each central explosive charge. The explosive charges are detonated for explosively expanding the zone of unfragmented formation toward the void for forming the fragmented permeable mass of formation particles having a reasonably uniformly distributed void fraction in the in situ oil shale retort.

  20. Mercury isotope fractionation during ore retorting in the Almadén mining district, Spain

    Science.gov (United States)

    Gray, John E.; Pribil, Michael J.; Higueras, Pablo L.

    2013-01-01

    Almadén, Spain, is the world's largest mercury (Hg) mining district, which has produced over 250,000 metric tons of Hg representing about 30% of the historical Hg produced worldwide. The objective of this study was to measure Hg isotopic compositions of cinnabar ore, mine waste calcine (retorted ore), elemental Hg (Hg0(L)), and elemental Hg gas (Hg0(g)), to evaluate potential Hg isotopic fractionation. Almadén cinnabar ore δ202Hg varied from − 0.92 to 0.15‰ (mean of − 0.56‰, σ = 0.35‰, n = 7), whereas calcine was isotopically heavier and δ202Hg ranged from − 0.03‰ to 1.01‰ (mean of 0.43‰, σ = 0.44‰, n = 8). The average δ202Hg enrichment of 0.99‰ between cinnabar ore and calcines generated during ore retorting indicated Hg isotopic mass dependent fractionation (MDF). Mass independent fractionation (MIF) was not observed in any of the samples in this study. Laboratory retorting experiments of cinnabar also were carried out to evaluate Hg isotopic fractionation of products generated during retorting such as calcine, Hg0(L), and Hg0(g). Calcine and Hg0(L) generated during these retorting experiments showed an enrichment in δ202Hg of as much as 1.90‰ and 0.67‰, respectively, compared to the original cinnabar ore. The δ202Hg for Hg0(g) generated during the retorting experiments was as much as 1.16‰ isotopically lighter compared to cinnabar, thus, when cinnabar ore was roasted, the resultant calcines formed were isotopically heavier, whereas the Hg0(g) generated was isotopically lighter in Hg isotopes.

  1. Explosion limits analysis of oil shale retorting under areobic condition%油页岩含氧干馏工艺流程爆炸极限分析

    Institute of Scientific and Technical Information of China (English)

    周洁琼; 张福群; 刘云义

    2012-01-01

    The main industrial utilization of oil shale is to produce shale oil through a retorting process. In order to lower the carrier gas temperature so as to save energy consumption and achieve better industrial application potential , moderate amount of oxygen was added to the carrier gas in the oil shale retorting process. And the potential security problems owing to combustible mixtures might occur. These tests focused on how gaseous products of thermal decomposition of oil shale changed depending on pyrolysis temperature. Explosion limits under different temperature and inert gas condition combining with theoretical study on explosion limits were analyzed and calculated. The results showed that H2, CH4 are the main combustible gas of the retorting process and the process caused no explosion hazards because of the concentration of flammable gas did not within the limits of explosion danger zone in the whole heating process. It was suggested to prevent explosive occurrence of that process by controlling oxygen flow. The results can give a reference to quantitative understanding gas release law in process of oil shale retorting under areobic condition and antiexplosion treatment.%根据干馏工艺流程配入适量氧气,可以降低载热气体需要预热的温度,以实现低能耗、易于工业生产的特点,设计了一套新型的有氧干馏工艺流程.有氧干馏工艺因其过程中存在可燃性混合物,有发生爆炸事故的可能性,通过实验对所收集的不同温度下的干馏气体的成分与含量进行了分析,结合爆炸极限理论,对该有氧干馏工艺流程的不同温度、不同惰性气体含量条件下可燃气体爆炸极限进行了分析计算.结果表明,可燃气体的浓度在整个反应升温过程中始终没有进入爆炸危险区域,说明该实验装置不具备爆炸危险性;对干馏工艺流程中氧气的输入量的控制,可以防止该工艺流程的火灾爆炸的发生.

  2. Effects of organic wastes on water quality from processing of oil shale from the Green River Formation, Colorado, Utah, and Wyoming

    Science.gov (United States)

    Leenheer, J.A.; Noyes, T.I.

    1986-01-01

    A series of investigations were conducted during a 6-year research project to determine the nature and effects of organic wastes from processing of Green River Formation oil shale on water quality. Fifty percent of the organic compounds in two retort wastewaters were identified as various aromatic amines, mono- and dicarboxylic acids phenols, amides, alcohols, ketones, nitriles, and hydroxypyridines. Spent shales with carbonaceous coatings were found to have good sorbent properties for organic constituents of retort wastewaters. However, soils sampled adjacent to an in situ retort had only fair sorbent properties for organic constituents or retort wastewater, and application of retort wastewater caused disruption of soil structure characteristics and extracted soil organic matter constituents. Microbiological degradation of organic solutes in retort wastewaters was found to occur preferentially in hydrocarbons and fatty acid groups of compounds. Aromatic amines did not degrade and they inhibited bacterial growth where their concentrations were significant. Ammonia, aromatic amines, and thiocyanate persisted in groundwater contaminated by in situ oil shale retorting, but thiosulfate was quantitatively degraded one year after the burn. Thiocyanate was found to be the best conservative tracer for retort water discharged into groundwater. Natural organic solutes, isolated from groundwater in contact with Green River Formation oil shale and from the White River near Rangely, Colorado, were readily distinguished from organic constituents in retort wastewaters by molecular weight and chemical characteristic differences. (USGS)

  3. Thermal processing of foods: control and automation

    National Research Council Canada - National Science Library

    Sandeep, K. P

    2011-01-01

    .... In addition to validating new control systems, some food companies have started the more difficult task of validating legacy control systems that have been operating for a number of years on retorts or aseptic systems.Thermal Processing...

  4. Minimum bed parameters for in situ processing of oil shale. Third quarterly report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Tyner, C. E.

    1980-11-01

    Oil shale retort runs 028 (16% void) and 029 (7% void), composed of competent shale blocks plus shale rubble, were completed. Retort 028, processed with air at a flux of 0.017 kg/sub air//m/sup 2/ /sub shale/.second, had peak temperatures of 700/sup 0/C, a retorting rate of 1.1 m/day, and a yield of 82% FA. Retort 029, processed with air at a flux of 0.027 kg/sub air//m/sup 2//sub shale/.second, had peak temperatures of 750/sup 0/C, a retorting rate of 1.6 m/day, and a yield of 75% FA. Comparisons of retort model calculations with experimental data from previous retort run 027 (16% void, air flux of .029 kg/sub air//m/sup 2//sub shale/.second were good; observed experimental yield was 95% FA, calculated yield, 92.8%; experimental retorting rates varied from 9.5 to 8.9 cm/h, calculated rates from 10.3 to 10.0 cm/h; observed local heating rates ranged from 29 to 14/sup 0/C/h, calculated heating rates from 20 to 16/sup 0/C/h; and observed peak temperatures ranged from 815 to 825/sup 0/C, calculated from 820 to 825/sup 0/C.

  5. Withdrawal of gases and liquids from an in situ oil shale retort

    Science.gov (United States)

    Siegel, Martin M.

    1982-01-01

    An in situ oil shale retort is formed within a subterranean formation containing oil shale. The retort contains a fragmented permeable mass of formation particles containing oil shale. A production level drift extends below the fragmented mass, leaving a lower sill pillar of unfragmented formation between the production level drift and the fragmented mass. During retorting operations, liquid and gaseous products are recovered from a lower portion of the fragmented mass. A liquid outlet line extends from a lower portion of the fragmented mass through the lower sill pillar for conducting liquid products to a sump in the production level drift. Gaseous products are withdrawn from the fragmented mass through a plurality of gas outlet lines distributed across a horizontal cross-section of a lower portion of the fragmented mass. The gas outlet lines extend from the fragmented mass through the lower sill pillar and into the production level drift. The gas outlet lines are connected to a gas withdrawal manifold in the production level drift, and gaseous products are withdrawn from the manifold separately from withdrawal of liquid products from the sump in the production level drift.

  6. Improved and more environmentally friendly charcoal production system using a low-cost retort-kiln (Eco-charcoal)

    Energy Technology Data Exchange (ETDEWEB)

    Adam, J.C. [Adam and Partner, Bahnhofstrasse 13, 82467 Garmisch (Germany)

    2009-08-15

    Research into a low-cost retort-kiln, used to produce charcoal from sustainably managed forests in a more environmentally friendly way (Eco-Charcoal), has been completed and pilot units have been built in India and East Africa. The unit is called ICPS (Improved Charcoal Production System). Importantly, it has a much higher efficiency rating than traditional earth-mound kilns, which have until now been the main means of domestic charcoal production in developing nations. The efficiency of traditional charcoal production methods is about 10%-22% (calculated on using oven-dry wood with 0% water content) while the efficiency of the ICPS is approximately 30%-42%. As compared with traditional carbonisation processes, the ICPS reduces emissions to the atmosphere by up to 75%. The ICPS works in two different phases. During the first phase the ICPS works like a traditional kiln; however, waste wood is burned in a separate fire box to dry the wood. During the second phase of operation the harmful volatiles are burned in a hot 'fire chamber' meaning all resulting emissions are cleaner, minus these already reduced volatiles. The heat gained by flaring the wood gazes, is used and recycled to accelerate the carbonisation process. Unlike traditional methods the ICPS can complete a carbonisation cycle within 12 h. (author)

  7. Wet scrubbing for control of particular emissions from oil shale retorting

    Energy Technology Data Exchange (ETDEWEB)

    Rinaldi, G.M.; Thurnau, R.C.; Lotwala, J.T.

    1981-01-01

    A mobile pilot-scale venturi scrubber was tested for control of particulate emissions from the Laramie Energy Techonolgy Center's 136-mg (150-ton)-capacity oil shale retort. The entire retort off-gas flow of 15.4 m/sup 3//min (545 ft/sup 3//min), discharged from a heat exchanger at a temperature of 58 /degree/C and saturated with water, was scrubbed at liquid-to-gas ratios of l.5 to 2.4 L/m/sup 3/. Sampling and analysis of the scrubber inlet and outlet gases were conducted to determine particulate removal. Outlet particulate concentrations were consistently reduced to 35 mg/m/sup 3/, even through inlet loadings varied from 125 to 387 mg/m/sup 3/ and 50 weight percent of the particles were less than four micrometers in diameter. Particulate control efficiencies up to 94 percent were achieved, although no correlation to liquid-to-gas ratio was observed. Simultaneous control of ammonia emissions, at efficiencies up to 75 percent, was also observed. 5 refs.

  8. Effect of combination processing on the microbial, chemical and sensory quality of ready-to-eat (RTE) vegetable pulav

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, R., E-mail: kumardfrl@gmail.com [Defence Food Research Laboratory, Mysore, Karnataka 570011 (India); George, Johnsy; Rajamanickam, R.; Nataraju, S.; Sabhapathy, S.N.; Bawa, A.S. [Defence Food Research Laboratory, Mysore, Karnataka 570011 (India)

    2011-12-15

    Effect of irradiation in combination with retort processing on the shelf life and safety aspects of an ethnic Indian food product like vegetable pulav was investigated. Gamma irradiation of RTE vegetable pulav was carried out at different dosage rates with {sup 60}Co followed by retort processing. The combination processed samples were analysed for microbiological, chemical and sensory characteristics. Microbiological analysis indicated that irradiation in combination with retort processing has significantly reduced the microbial loads whereas the chemical and sensory analysis proved that this combination processing is effective in retaining the properties even after storage for one year at ambient conditions. The results also indicated that a minimum irradiation dosage at 4.0 kGy along with retort processing at an F{sub 0} value of 2.0 is needed to achieve the desired shelf life with improved organoleptic qualities. - Highlights: > A combination processing involving gamma irradiation and retort processing. > Combination processing reduced microbial loads. > Minimum dose of 4.0 kGy together with retort processing at F{sub 0}-2.0 is required to achieve commercial sterility.

  9. Sterilization of Staple Foods in Retort Pouch%软包装主食罐头杀菌工艺研究

    Institute of Scientific and Technical Information of China (English)

    郑志强; 刘嘉喜; 王越鹏

    2012-01-01

    对软包装主食罐头的杀菌工艺进行研究,分析在不同杀菌温度和时间条件下食品中心温度及F值的变化,确定最佳杀菌方式为双峰高温杀菌,杀菌参数为80℃、5min,110℃、5min,121℃、12min,125℃、(30+30)s,峰底113℃,该杀菌工艺能够有效降低软包装主食罐头的杀菌强度,杀菌后的产品大大降低了因高温产生的后熟蒸馏味,大幅延长了保质期,最终产品品质显著提高。%This study was undertaken to investigate the sterilization of retort pouches containing staple foods.Variations in central temperature and F value were analyzed under various conditions of sterilization temperature and time.The optimal sterilization process was double peak high temperature sterilization at 80 ℃ for 5 min,110 ℃ for 5 min,121 ℃ for 12 min and 125 ℃ for 30 s + 30 s with a peak base temperature of 113 ℃.Under these conditions,the sterilization intensity of retort pouches was attenuated effectively.Moreover,the distillation odor caused by high-temperature sterilization was reduced greatly,and the shelf life was markedly extended.As a result,the quality of staple foods could be obviously improved.

  10. Post Retort, Pre Hydro-treat Upgrading of Shale Oil

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John

    2012-09-30

    Various oil feedstocks, including oil from oil shale, bitumen from tar sands, heavy oil, and refin- ery streams were reacted with the alkali metals lithium or sodium in the presence of hydrogen or methane at elevated temperature and pressure in a reactor. The products were liquids with sub- stantially reduced metals, sulfur and nitrogen content. The API gravity typically increased. Sodi- um was found to be more effective than lithium in effectiveness. The solids formed when sodium was utilized contained sodium sulfide which could be regenerated electrochemically back to so- dium and a sulfur product using a "Nasicon", sodium ion conducting membrane. In addition, the process was found to be effective reducing total acid number (TAN) to zero, dramatically reduc- ing the asphaltene content and vacuum residual fraction in the product liquid. The process has promise as a means of eliminating sulfur oxide and carbon monoxide emissions. The process al- so opens the possibility of eliminating the coking process from upgrading schemes and upgrad- ing without using hydrogen.

  11. Economics derived from detailed and definitive design of Superior's Circlar Grate Retort for an 18,000 BPD oil shale demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    Lilley, D.F.; Fishback, J.W.

    1983-04-01

    Superior Oil Company has continued efforts to reduce to practice the Superior retorting technology as applied to oil shale. From February 1981 to October 1982, Superior has participated in a cost sharing agreement with the Department of Energy for detailed design of the Superior Circular Grate Retort, definitive design of retort ancillaries, auxiliaries and offsites, and mining, and for capital and operating cost estimates for a nominal 18,000 BPD oil shale plant. The terms, detailed design and definitive design, are defined. The design documents are described in sufficient detail to render an overview to the reader of the basis used for project cost estimates and economic analysis.

  12. Comparison of the Acceptability of Various Oil Shale Processes

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, A K; McConaghy, J R

    2006-03-11

    While oil shale has the potential to provide a substantial fraction of our nation's liquid fuels for many decades, cost and environmental acceptability are significant issues to be addressed. Lawrence Livermore National Laboratory (LLNL) examined a variety of oil shale processes between the mid 1960s and the mid 1990s, starting with retorting of rubble chimneys created from nuclear explosions [1] and ending with in-situ retorting of deep, large volumes of oil shale [2]. In between, it examined modified-in-situ combustion retorting of rubble blocks created by conventional mining and blasting [3,4], in-situ retorting by radio-frequency energy [5], aboveground combustion retorting [6], and aboveground processing by hot-solids recycle (HRS) [7,8]. This paper reviews various types of processes in both generic and specific forms and outlines some of the tradeoffs for large-scale development activities. Particular attention is given to hot-recycled-solids processes that maximize yield and minimize oil shale residence time during processing and true in-situ processes that generate oil over several years that is more similar to natural petroleum.

  13. Method for establishing a combustion zone in an in situ oil shale retort having a pocket at the top

    Science.gov (United States)

    Cha, Chang Y.

    1980-01-01

    An in situ oil shale retort having a top boundary of unfragmented formation and containing a fragmented permeable mass has a pocket at the top, that is, an open space between a portion of the top of the fragmented mass and the top boundary of unfragmented formation. To establish a combustion zone across the fragmented mass, a combustion zone is established in a portion of the fragmented mass which is proximate to the top boundary. A retort inlet mixture comprising oxygen is introduced to the fragmented mass to propagate the combustion zone across an upper portion of the fragmented mass. Simultaneously, cool fluid is introduced to the pocket to prevent overheating and thermal sloughing of formation from the top boundary into the pocket.

  14. Effect of different binders on the physico-chemical, textural, histological, and sensory qualities of retort pouched buffalo meat nuggets.

    Science.gov (United States)

    Devadason, I Prince; Anjaneyulu, A S R; Babji, Y

    2010-01-01

    The functional properties of 4 binders, namely corn starch, wheat semolina, wheat flour, and tapioca starches, were evaluated to improve the quality of buffalo meat nuggets processed in retort pouches at F(0) 12.13. Incorporation of corn starch in buffalo meat nuggets produced more stable emulsion than other binders used. Product yield, drip loss, and pH did not vary significantly between the products with different binders. Shear force value was significantly higher for product with corn starch (0.42 +/- 0.0 Kg/cm(3)) followed by refined wheat flour (0.36 +/- 0.010 Kg/cm(3)), tapioca starch (0.32 +/- 0.010 Kg/cm(3)), and wheat semolina (0.32 +/- 0.010 Kg/cm(3)). Type of binder used had no significant effect on frying loss, moisture, and protein content of the product. However, fat content was higher in products with corn starch when compared to products with other binders. Texture profile indicated that products made with corn starch (22.17 +/- 2.55 N) and refined wheat flour (21.50 +/- 0.75 N) contributed firmer texture to the product. Corn starch contributed greater chewiness (83.8 +/- 12.51) to the products resulting in higher sensory scores for texture and overall acceptability. Products containing corn starch showed higher sensory scores for all attributes in comparison to products with other binders. Panelists preferred products containing different binders in the order of corn starch (7.23 +/- 0.09) > refined wheat flour (6.48 +/- 0.13) > tapioca starch (6.45 +/- 0.14) > wheat semolina (6.35 +/- 0.13) based on sensory scores. Histological studies indicated that products with corn starch showed dense protein matrix, uniform fat globules, and less number of vacuoles when compared to products made with other binders. The results indicated that corn flour is the better cereal binder for developing buffalo meat nuggets when compared to all other binders based on physico-chemical and sensory attributes.

  15. Effects of in-situ oil-shale retorting on water quality near Rock Springs, Wyoming, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Lindner-Lunsford, J.B.; Eddy, C.A.; Plafcan, M.; Lowham, H.W.

    1990-12-01

    Experimental in-situ retorting techniques (methods of extracting shale oil without mining) were used from 1969 to 1979 by the Department of Energy's (DOE) Laramie Energy Technology Center (LETC) at a test area near Rock Springs in southwestern Wyoming. The retorting experiments at site 9 have produced elevated concentrations of some contaminants in the ground water. During 1988 and 1989, the US Geological Survey, in cooperation with the US Department of Energy, conducted a site characterization study to evaluate the chemical contamination of ground water at the site. Water samples from 34 wells were analyzed; more than 70 identifiable organic compounds were detected using a combination of gas chromatography and mass spectrometry analytical methods. This report provides information that can be used to evaluate possible remedial action for the site. Remediation techniques that may be applicable include those techniques based on removing the contaminants from the aquifer and those based on immobilizing the contaminants. Before a technique is selected, the risks associated with the remedial action (including the no-action alternative) need to be assessed, and the criteria to be used for decisions regarding aquifer restoration need to be defined. 31 refs., 23 figs., 9 tabs.

  16. Heavy metal removal from produced water using retorted shale; Remocao de metais pesados em aguas produzidas utilizando xisto retortado

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Patricia M.; Melo, Marcos A.F.; Melo, Dulce M.A.; Silva Junior, Carlos N.; Assuncao, Ary L.C. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Anjos, Marcelino J. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2004-07-01

    The Production of oil and gas is usually accompanied by the production of large volume of water that can have significant environmental effects if not properly treated. In this work, the use of retort shale was investigated as adsorbent agent to remove heavy metals in produced water. Batch adsorption studies in synthetic solution were performed for several metal ions. The efficiency removal was controlled by solution pH, adsorbent dosage, and initial ion concentration and agitation times. Two simple kinetic models were used, pseudo-first- and second-order, were tested to investigate the adsorption mechanisms. The equilibrium data fitted well with Langmuir and Freundlich models. The produced water samples were treated by retorted shale under optimum adsorption conditions. Synchrotron radiation total reflection X-ray fluorescence was used to analyze the elements present in produced water samples from oil field in Rio Grande do Norte, Brazil. The removal was found to be approximately 20-50% for Co, Ni, Sr and above 80% for Cr, Ba, Hg and Pb. (author)

  17. Paraho environmental data. Part I. Process characterization. Par II. Air quality. Part III. Water quality

    Energy Technology Data Exchange (ETDEWEB)

    Heistand, R.N.; Atwood, R.A.; Richardson, K.L.

    1980-06-01

    From 1973 to 1978, Development Engineering, Inc. (DEI), a subsidiary of Paraho Development Corporation, demostrated the Paraho technology for surface oil shale retorting at Anvil Points, Colorado. A considerable amount of environmentally-related research was also conducted. This body of data represents the most comprehensive environmental data base relating to surface retorting that is currently available. In order to make this information available, the DOE Office of Environment has undertaken to compile, assemble, and publish this environmental data. The compilation has been prepared by DEI. This report includes the process characterization, air quality, and water quality categories.

  18. The Pidgeon Process in China and Its Future

    Science.gov (United States)

    Zang, Jing Chun; Ding, Weinan

    Magnesium production in China has been growing steadily over the past 10 years. Most of the metal has been produced by the Pidgeon process. This process uses horizontal steel tubes called retorts, in furnaces and under vacuum. In the retorts mixtures of finely ground calcined dolomite and ferrosilicon formed into briquettes react to form magnesium vapors which are condensed and later remelted into ingots. The Pidgeon process was long thought to be uneconomic and obsolete. The Chinese have used the advantages of excellent raw material, location, large skilled labor supply, and low capital costs to produce magnesium by this process. The Chinese magnesium is being sold at the lowest prices in the world and lower than aluminum on a pound for pound basis.

  19. 21 CFR 113.87 - Operations in the thermal processing room.

    Science.gov (United States)

    2010-04-01

    ..., car, or crate used to hold containers in a retort, or one or more containers therein, shall, if it contains any retorted food product, be plainly and conspicuously marked with a heat-sensitive indicator, or... change has occurred in the heat-sensitive indicator as a result of retorting for all retort baskets...

  20. A "Retort Courteous."

    Science.gov (United States)

    Kingsbury, Mary E.

    1979-01-01

    Responds to article by Pauline Wilson (School Library Journal, v25 n6 Feb 1979) in terms of defining the role of children's librarians, clarifying the goals of children's services, making a case for such services, improving the impression made by children's librarians, determining appropriate preparation, and understanding and achieving quality…

  1. Closed Process of Shale Oil Recovery from Circulating Washing Water by Hydrocyclones

    Directory of Open Access Journals (Sweden)

    Yuan Huang

    2016-12-01

    Full Text Available The conventional oil recovery system in the Fushun oil shale retorting plant has a low oil recovery rate. A large quantity of fresh water is used in the system, thereby consuming a considerable amount of water and energy, as well as polluting the environment. This study aims to develop a closed process of shale oil recovery from the circulating washing water for the Fushun oil shale retorting plant. The process would increase oil yield and result in clean production. In this process, oil/water hydrocyclone groups were applied to decrease the oil content in circulating water and to simultaneously increase oil yield. The oil sludge was removed by the solid/liquid hydrocyclone groups effectively, thereby proving the smooth operation of the devices and pipes. As a result, the oil recovery rate has increased by 5.3 %, which corresponds to 230 tonnes a month.

  2. Simulation and Design of Shale Flashing Retorting Recovery Oil and Gas%油页岩闪速干馏油气回收工艺设计及模拟

    Institute of Scientific and Technical Information of China (English)

    张原源; 曹祖宾; 韩冬云

    2016-01-01

    According to the process characteristics of flashing retorting process,a set of suitable for high temperature oil washing oil vapor recovery technology was designed,combined with pilot plant field data,using plus Aspen software for process simulation.Shale oil was separated to heavy oil,heavy diesel oil,light oil fraction and gasoline fraction by the oil washing method.The process produced steam as by-product and it had the advantages of high recovery rate,low oil loss,low energy consumption,and could effectively avoided environmental pollution.Using this process,the rate of gas recovery could be greatly enhanced:crude oil washing tower could recycle 39.7% of the oil steam,heavy diesel oil washing tower could recycle 60.3% of the oil steam.Compared with the traditional process,it could improve the recovery rate of 10%-20%.%针对闪速干馏工艺特点,设计了一套适合高温油洗法回收油气工艺,并结合中试装置现场数据,运用Aspen Plus 软件进行了工艺模拟.油洗工艺可将页岩油粗分为重油、重柴油馏分、轻油馏分、汽油馏分.该工艺副产水蒸气,具有油损失小、能耗低、可减轻环境污染等特点,采用该回收工艺,可大幅度提升干馏油气的回收率,重油洗涤塔可回收 39.7%的油蒸气,重柴油洗涤塔可回收 60.3%的油蒸气,与传统工艺相比回收率可提高 10%~20%.

  3. Occidental vertical modified in situ process for the recovery of oil from oil shale. Phase II. Quarterly progress report, September 1-November 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    McDermott, William F.

    1979-12-01

    The major activities at OOSI's Logan Wash site during the quarter were: driving the access drifts towards the underground locations for Retorts 7 and 8; manway raise boring; constructing the change house; rubbling the first lift of Mini-Retort (MR)1; preparing the Mini-Retorts for tracer testing; coring of Retort 3E; and beginning the DOE instrumentation program.

  4. Caracterização e uso de xisto para adsorção de chumbo (II em solução Characterization and use of retorted shale for adsorption of lead (II in solution

    Directory of Open Access Journals (Sweden)

    P. M. Pimentel

    2006-09-01

    Full Text Available Existe um grande interesse no uso de materiais de baixo custo para remoção de metais pesados em águas residuais. Novas técnicas de processamento e adsorventes incluindo argilas, resinas sintéticas, turfa e quitosana tem sido estudados objetivando substituir o carvão ativado. No presente trabalho, xisto retortado (XR, um rejeito sólido da transformação térmica do xisto oleígeno, foi caracterizado com o objetivo de utilizá-lo como adsorventes para remoção de metais pesados. O aproveitamento desse rejeito é de grande interesse, uma vez que o Brasil possui a segunda maior reserva mundial de xisto oleígeno. Os rejeitos foram caracterizados por diferentes técnicas de caracterização, incluindo tamanho de partícula, análise termogravimétrica, fluorescência de raios X, espectroscopia na região do infravermelho, difração de raios X, e microscopia eletrônica de varredura-EDS. As características dos pós foram adequadas para os experimentos de adsorção. Estudos de adsorção de Pb2+ pelo método de banho finito foram realizados. A remoção do Pb2+ foi superior a 85%.There has been a growing interest in the use of cost-effective materials to remove heavy metals from wastewater. New processing techniques and adsorbents including natural clays, synthetic resins, peat and chitosan have been studied aiming at replacing activated coal. In the present investigation, retorted shale, a solid residue of the thermal transformation of oil shale, was characterized with the objective of preparing heavy metals adsorbents. In addition to the direct environmental benefits from the technology to wastewater, Brazil has the second world reserve of oil shale. The fine residue was fully characterized by different techniques including particle size determination, thermogravimetric analyses, BET, FTIR, X-ray diffraction, and SEM/EDS. The characteristics of the powder were appropriate for adsorption. Batch adsorption studies in Pb2+ synthetic solution

  5. Food processing by high hydrostatic pressure.

    Science.gov (United States)

    Yamamoto, Kazutaka

    2017-04-01

    High hydrostatic pressure (HHP) process, as a nonthermal process, can be used to inactivate microbes while minimizing chemical reactions in food. In this regard, a HHP level of 100 MPa (986.9 atm/1019.7 kgf/cm(2)) and more is applied to food. Conventional thermal process damages food components relating color, flavor, and nutrition via enhanced chemical reactions. However, HHP process minimizes the damages and inactivates microbes toward processing high quality safe foods. The first commercial HHP-processed foods were launched in 1990 as fruit products such as jams, and then some other products have been commercialized: retort rice products (enhanced water impregnation), cooked hams and sausages (shelf life extension), soy sauce with minimized salt (short-time fermentation owing to enhanced enzymatic reactions), and beverages (shelf life extension). The characteristics of HHP food processing are reviewed from viewpoints of nonthermal process, history, research and development, physical and biochemical changes, and processing equipment.

  6. Oil Sludge Treatment in Oil Shale Retorting Process%油母页岩干馏生产过程中的油泥处理

    Institute of Scientific and Technical Information of China (English)

    何红梅

    2009-01-01

    研究了在油母页岩干馏生产各个过程中的油泥的来源及其特点,利用废甲苯进行萃取、热碱水进行洗脱,处理回收页岩油.页岩油的回收率与碳酸钠的质量浓度、废甲苯的质量以及处理温度有关.把处理后的油泥渣与页岩粉尘、固硫剂等进行搅拌混合后压碇成型,经干燥后,进行低温干馏生产,从而实现油泥的资源化、无害化处理.

  7. Application of transfer functions to canned tuna fish thermal processing.

    Science.gov (United States)

    Ansorena, M R; del Valle, C; Salvadori, V O

    2010-02-01

    Design and optimization of thermal processing of foods need accurate dynamic models to ensure safe and high quality food products. Transfer functions had been demonstrated to be a useful tool to predict thermal histories, especially under variable operating conditions. This work presents the development and experimental validation of a dynamic model (discrete transfer function) for the thermal processing of tuna fish in steam retorts. Transfer function coefficients were obtained numerically, using commercial software of finite elements (COMSOL Multiphysics) to solve the heat transfer balance. Dependence of transfer function coefficients on the characteristic dimensions of cylindrical containers (diameter and height) and on the sampling interval is reported. A simple equation, with two empirical parameters that depends on the container dimensions, represented the behavior of transfer function coefficients with very high accuracy. Experimental runs with different size containers and different external conditions (constant and variable retort temperature) were carried out to validate the developed methodology. Performance of the thermal process simulation was tested for predicting internal product temperature of the cold point and lethality and very satisfactory results were found. The developed methodology can play an important role in reducing the computational effort while guaranteeing accuracy by simplifying the calculus involved in the solution of heat balances with variable external conditions and emerges as a potential approach to the implementation of new food control strategies leading not only to more efficient processes but also to product quality and safety.

  8. Thermal inactivation of Listeria monocytogenes and Yersinia enterocolitica in minced beef under laboratory conditions and in sous-vide prepared minced and solid beef cooked in a commercial retort.

    Science.gov (United States)

    Bolton, D J; McMahon, C M; Doherty, A M; Sheridan, J J; McDowell, D A; Blair, I S; Harrington, D

    2000-04-01

    D-values were obtained for Listeria monocytogenes and Yersinia enterocolitica at 50, 55 and 60 degrees C in vacuum-packed minced beef samples heated in a laboratory water-bath. The experiment was repeated using vacutainers, which allowed heating of the beef to the desired temperature before inoculation. D-values of between 0.15 and 36.1 min were obtained for L. monocytogenes. Pre-heating the beef samples significantly affected (P < 0.05) the D60 value only. D-values for Y. enterocolitica ranged from 0.55 to 21.2 min and all the D-values were significantly different (P < 0.05) after pre-heating. In general, the D-values obtained for core inoculated solid beef samples were significantly higher (P < 0.05) than those generated in minced beef when heated in a Barriquand Steriflow commercial retort.

  9. 直立炉、焦炉荒煤气微压自动调节的改进%The improvement of micropressure automatic control for raw gas from vertical retorts and tar ovens

    Institute of Scientific and Technical Information of China (English)

    薛润林; 张勇; 刘玉霞

    2001-01-01

    This article presents the use of rapid dampers in a raw gas pressure control system to change the pressure tap position of a speed governor for improving the top pressure of a vertical retort and a tar oven. This technological improvement can keep the pneumatic or electric butter fly valves working in a stable way and the raw gas micropressure proper under automatic control.%本文介绍了对直立炉、焦炉炉顶压力,使用快速阻尼器改进变速器取压点位置等技改措施,确保气动蝶阀和电动蝶阀的稳定运行,实现荒煤气微压自动调节。

  10. Effect of oxygen permeance of retort pouches on quality degradation in boiled bamboo shoots%蒸煮袋材料透氧性对水煮笋品质劣变的影响

    Institute of Scientific and Technical Information of China (English)

    潘梦垚; 卢立新; 唐亚丽; 王军

    2013-01-01

    研究了蒸煮袋材料透氧性对其真空包装水煮笋品质劣变的影响.采用3种不同透氧量的耐高温蒸煮复合薄膜PA/PE、KPA/PE和PA/PET/SiO/PE对水煮笋进行真空包装,基于33℃恒温加速试验测定分析不同包装材料内的水煮笋感官与营养品质的劣变规律,以水煮笋色泽、硬度、可溶性蛋白质、游离氨基酸、还原糖和维生素C作为关键质量指标,比较各自的品质劣变速度.结果表明,蒸煮袋材料的氧气透过量对水煮笋各指标劣变程度影响显著(P<0.05),笋的品质劣变速度随材料透氧量的增加而提高,其中,透氧量最小的材料PA/PET/SiOx/PE对产品品质的维持效果最佳.%The effect of oxygen permeance of retort pouches on the quality deterioration of vacuum-packaged boiled bamboo shoots was studied.The boiled bamboo shoots were vacuum-packaged with three heat-resistant laminated films of PA/PE,KPA/PE and PA/PET/SiOx/PE which had different oxygen permeance.The sensory and nutritional quality degradation of boiled bamboo shoots packaged in these three materials were analyzed via constant temperature accelerating test at 33℃.The color,firmness,soluble protein,free amino acid,reducing sugar and vitamin C in boiled bamboo shoots were regarded as critical quality indexes in order to compare the respective quality degradation rate for each group of samples.The results showed that the oxygen permeance of retort pouches had a significant effect on index degradation rate of boiled bamboo shoots (P < 0.05).The degradation rates were increased with the increase of material oxygen permeance.Among all the three kinds of material,the least oxygen premeance was PA/PET/SiOx/PE and it had the best function to maintain the products quality.

  11. Converting oil shale to liquid fuels: energy inputs and greenhouse gas emissions of the Shell in situ conversion process.

    Science.gov (United States)

    Brandt, Adam R

    2008-10-01

    Oil shale is a sedimentary rock that contains kerogen, a fossil organic material. Kerogen can be heated to produce oil and gas (retorted). This has traditionally been a CO2-intensive process. In this paper, the Shell in situ conversion process (ICP), which is a novel method of retorting oil shale in place, is analyzed. The ICP utilizes electricity to heat the underground shale over a period of 2 years. Hydrocarbons are produced using conventional oil production techniques, leaving shale oil coke within the formation. The energy inputs and outputs from the ICP, as applied to oil shales of the Green River formation, are modeled. Using these energy inputs, the greenhouse gas (GHG) emissions from the ICP are calculated and are compared to emissions from conventional petroleum. Energy outputs (as refined liquid fuel) are 1.2-1.6 times greater than the total primary energy inputs to the process. In the absence of capturing CO2 generated from electricity produced to fuel the process, well-to-pump GHG emissions are in the range of 30.6-37.1 grams of carbon equivalent per megajoule of liquid fuel produced. These full-fuel-cycle emissions are 21%-47% larger than those from conventionally produced petroleum-based fuels.

  12. Effects of aqueous effluents from in situ fossil-fuel processing technologies on aquatic systems

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, H.L.

    1978-12-01

    Progress is reported for the second year of this project to evaluate the effects of aqueous effluents from in-situ fossil fuel processing technologies on aquatic biota. The project objectives for Year 2 were pursued through five tasks: literature reviews on process water constituents, possible environmental impacts and potential control technologies; toxicity bioassays on the effects of coal gasification and oil shale retorting process waters and six process water constituents on aquatic biota; biodegradation studies on process water constituents; bioaccumulation factor estimation for the compounds tested in the toxicity bioassays; and recommendations on maximum exposure concentrations for process water constituents based on data from the project and from the literature. Results in each of the five areas of research are reported.

  13. Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes

    Energy Technology Data Exchange (ETDEWEB)

    Hakala, J. Alexandra [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Stanchina, William [Univ. of Pittsburgh, PA (United States); National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Soong, Yee [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Hedges, Sheila [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2011-01-01

    Development of in situ electromagnetic (EM) retorting technologies and design of specific EM well logging tools requires an understanding of various process parameters (applied frequency, mineral phases present, water content, organic content and temperature) on oil shale dielectric properties. In this literature review on oil shale dielectric properties, we found that at low temperatures (<200° C) and constant oil shale grade, both the relative dielectric constant (ε') and imaginary permittivity (ε'') decrease with increased frequency and remain constant at higher frequencies. At low temperature and constant frequency, ε' decreases or remains constant with oil shale grade, while ε'' increases or shows no trend with oil shale grade. At higher temperatures (>200º C) and constant frequency, epsilon' generally increases with temperature regardless of grade while ε'' fluctuates. At these temperatures, maximum values for both ε' and ε'' differ based upon oil shale grade. Formation fluids, mineral-bound water, and oil shale varve geometry also affect measured dielectric properties. This review presents and synthesizes prior work on the influence of applied frequency, oil shale grade, water, and temperature on the dielectric properties of oil shales that can aid in the future development of frequency- and temperature-specific in situ retorting technologies and oil shale grade assay tools.

  14. Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes

    Energy Technology Data Exchange (ETDEWEB)

    Hakala, J. Alexandra; Soong, Yee; Hedges, Sheila [National Energy Technology Laboratory, Pittsburgh, PA (United States); Stanchina, William [National Energy Technology Laboratory, Pittsburgh, PA (United States); Department of Electrical and Computer Engineering, University of Pittsburgh, PA (United States)

    2011-01-15

    Development of in situ electromagnetic (EM) retorting technologies and design of specific EM well logging tools requires an understanding of various process parameters (applied frequency, mineral phases present, water content, organic content and temperature) on oil shale dielectric properties. In this literature review on oil shale dielectric properties, we found that at low temperatures (< 200 C) and constant oil shale grade, both the relative dielectric constant ({epsilon}') and imaginary permittivity ({epsilon}'') decrease with increased frequency and remain constant at higher frequencies. At low temperature and constant frequency, {epsilon}' decreases or remains constant with oil shale grade, while {epsilon}'' increases or shows no trend with oil shale grade. At higher temperatures (> 200 C) and constant frequency, {epsilon}' generally increases with temperature regardless of grade while {epsilon}'' fluctuates. At these temperatures, maximum values for both {epsilon}' and {epsilon}'' differ based upon oil shale grade. Formation fluids, mineral-bound water, and oil shale varve geometry also affect measured dielectric properties. This review presents and synthesizes prior work on the influence of applied frequency, oil shale grade, water, and temperature on the dielectric properties of oil shales that can aid in the future development of frequency- and temperature-specific in situ retorting technologies and oil shale grade assay tools. (author)

  15. Geokinetics in situ shale oil recovery project. Third annual report, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Hutchinson, D.L.

    1980-05-01

    Objective is to develop a true in situ process for recovering shale oil using a fire front moving in a horizontal direction. The project is being conductd at a field site located 70 miles south of Vernal, Utah. During 1979, five retorts were blasted. Four of these were small retorts (approx. 7000 tons), designed to collect data for improving the blast method. The fifth retort was a prototype of a full-sized retort measuring approximately 200 ft on each side. Two retorts, blasted the previous year, were burned, and a third retort was ignited near the end of the year. A total of 5170 bbl of oil was produced during the year.

  16. [Study on rapid analysis method of pesticide contamination in processed foods by GC-MS and GC-FPD].

    Science.gov (United States)

    Kobayashi, Maki; Otsuka, Kenji; Tamura, Yasuhiro; Tomizawa, Sanae; Kamijo, Kyoko; Iwakoshi, Keiko; Sato, Chizuko; Nagayama, Toshihiro; Takano, Ichiro

    2011-01-01

    A simple and rapid method using GC-MS and GC-FPD for the determination of pesticide contamination in processed food has been developed. Pesticides were extracted from a sample with ethyl acetate in the presence of anhydrous sodium sulfate, then cleaned up with a combination of mini-columns, such as macroporous diatomaceous earth, C18, GCB (graphite carbon black) and PSA. Recovery tests of 57 pesticides (known to be toxic or harmful) from ten kinds of processed foods (butter, cheese, corned beef, dried shrimp, frozen Chinese dumplings, grilled eels, instant noodles, kimchi, retort-packed curry and wine) were performed, and the recovery rates were mostly between 70% and 120%. This method can be used to judge whether or not processed foods are contaminated with pesticides at potentially harmful levels.

  17. Effect of different percent loadings of nanoparticles and food processing conditions on the properties of nylon 6 films

    Science.gov (United States)

    Allafi, Ahmad R.

    Nylon 6 organoclay nanocomposites were prepared by melt processing using a twin screw extruder. Five different films were produced with five different % loadings (0, 2, 4, 6, and 8%). This study had three main objectives. The first was to investigate the effects of loading percentages on the barrier, thermal and mechanical properties of nylon 6 nanocomposite materials. The second was to study the effects of 0, 50 and 80% RH on the oxygen permeation of the nylon 6/nanocomposite films. The third was to investigate the properties of nylon 6 nanocomposite materials exposed to typical food processing conditions. These films were tested for their permeabilities to oxygen (OTR), carbon dioxide (CO2TR), and water vapor (WVTR). Thermal properties testing on the samples included differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Tensile strength at break, tensile modulus at break, and the percent elongation for the five films were examined using an INSTRON tester. Transmission electron microscopy (TEM) was used to investigate the morphology of the five films. Results showed that all gas barriers significantly increased with percent loading but there were no significant differences (P>0.05) between the 6 and 8% for the CO2TR. For the DMA, the storage modulus also significantly increased (P<0.05) with increasing loading except between the 2 and 4% concentrations. For the DSC analyses, enthalpy of fusion decreased slightly from an average of 39 J/g (control) to 32J/g (8% loading). The melt temperature also decreased from 227 to 222°C between those loadings. High pressure processed samples had the highest barrier against oxygen permeation when compared with the retorted and controls. Retorting seemed to reduce the tensile strength slightly; however, no significant changes in modulus and elongation occurred after retorting and HPP. These results showed that increasing percent loadings increased the stiffness of the material at the expense of its

  18. Retort to Religious Critics of RET.

    Science.gov (United States)

    Nardi, Thomas J.

    This paper is concerned with people who contact clergymen for counseling who could benefit from the short-term directive therapeutic approach of Rational Emotive Therapy (RET) and the reluctance of clergymen to use RET. The integration of the precepts of Christianity and the concepts of RET is considered. This paper is specifically a response to…

  19. Choice of salts for process of continous sodium modification of Al-Si alloys

    Directory of Open Access Journals (Sweden)

    Białobrzeski A.

    2007-01-01

    Full Text Available Broad application of aluminum cast alloys, silumins first of all, have become to be possible after finding a method of change of solidification form in Al-Si eutectic mixture. By introduction to liquid alloy a slight additive of modifying agent this primary thick, needle-like shape of Si crystals becomes altered into fine and compact structure. Quality of structure modification depends on correct proportioning of the modifying agent, temperature of metal and time elapsing from modification to solidification of the alloy. The sodium is used as one of the modifying agents. The sodium is introduced into metal bath in metallic form or in form of compounds containing sodium. Apart from a form in which modifying agent is introduced to metal bath, however, its action is relatively short (about 15-20 minutes. Prolongation of modifying agent’s action can be accomplished due to technology of continuous introduction of the sodium to metal bath. That technology is based on continuous electrolysis of sodium salt, occurring directly in melting pot with liquid alloy. Sodium salt placed in retort ( immersed in liquid metal undergoes dissociation due to applied voltage, and next electrolysis. Sodium ions arisen during the dissociation of sodium salts and electrolysis are “conveyed” through retort walls made from solid electrolyte. In contact with liquid alloy as cathode, sodium ions pass to atomic state, modifying the alloy. Suitable selection of material for the anode (source of sodium is an important issue. The paper presents results of preliminary research concerning selection of sodium salt, based on predetermined Rm tensile strength and measured voltage drop for the alloy in solid state. Values of those parameters confirm modification effect on tested alloys. Complexity of physical-chemical phenomena occurring in course of the process effects on necessity of further investigation which needs to be performed for optimization of parameters of the

  20. Chattanooga shale: uranium recovery by in situ processing

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, D.D.

    1977-04-25

    The increasing demand for uranium as reactor fuel requires the addition of sizable new domestic reserves. One of the largest potential sources of low-grade uranium ore is the Chattanooga shale--a formation in Tennessee and neighboring states that has not been mined conventionally because it is expensive and environmentally disadvantageous to do so. An in situ process, on the other hand, might be used to extract uranium from this formation without the attendant problems of conventional mining. We have suggested developing such a process, in which fracturing, retorting, and pressure leaching might be used to extract the uranium. The potential advantages of such a process are that capital investment would be reduced, handling and disposing of the ore would be avoided, and leaching reagents would be self-generated from air and water. If successful, the cost reductions from these factors could make the uranium produced competitive with that from other sources, and substantially increase domestic reserves. A technical program to evaluate the processing problems has been outlined and a conceptual model of the extraction process has been developed. Preliminary cost estimates have been made, although it is recognized that their validity depends on how successfully the various processing steps are carried out. In view of the preliminary nature of this survey (and our growing need for uranium), we have urged a more detailed study on the feasibility of in situ methods for extracting uranium from the Chattanooga shale.

  1. Effects of aqueous effluents from in situ fossil fuel processing technologies on aquatic systems. Annual progress report, January 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, H.L.

    1980-01-04

    This is the third annual progress report for a continuing EPA-DOE jointly funded project to evaluate the effects of aqueous effluents from in situ fossil-fuel processing technologies on aquatic biota. The project is organized into four project tasks: (1) literature review; (2) process water screening; (3) methods development; and (4) recommendations. Our Bibliography of aquatic ecosystem effects, analytical methods and treatment technologies for organic compounds in advanced fossil-fuel processing effluents was submitted to the EPA for publication. The bibliography contains 1314 citations indexed by chemicals, keywords, taxa and authors. We estimate that the second bibliography volume will contain approximately 1500 citations and be completed in February. We compiled results from several laboratories of inorganic characterizations of 19 process waters: 55 simulated in situ oil-shale retort waters; and Hanna-3, Hanna-4B 01W and Lawrence Livermore Hoe Creek underground coal gasification condenser waters. These process waters were then compared to a published summary of the analyses from 18 simulated in situ oil-shale retort waters. We completed this year 96-h flow-through toxicity bioassays with fathead minnows and rainbow trout and 48-h flow-through bioassays with Daphnia pulicaria exposed to 5 oil-shale process waters, 1 tar-sand process water, 2 underground coal gasification condenser waters, 1 post-gasification backflood condenser water, as well as 2 bioassays with fossil-fuel process water constituents. The LC/sub 50/ toxicity values for these respective species when exposed to these waters are given in detail. (LTN)

  2. OCCIDENTAL VERTICAL MODIFIED IN SITU PROCESS FOR THE RECOVERY OF OIL FROM OIL SHALE. PHASE II

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Reid M.

    1980-09-01

    The progress presented in this report covers the period June 1, 1980 through August 31, 1980 under the work scope for.Phase II of the DOE/Occidental Oil Shale, Inc. (OOSI) Cooperative Agreement. The major activities at OOSI 1s Logan Wash site during the quarter were: mining the voids at all levels for Retorts 7, 8 and 8x; completing Mini-Retort (MR) construction; continuing surface facility construction; tracer testing the MR 1 s; conducting Retorts 7 & 8 related Rock Fragmentation tests; setting up and debugging the Sandia B-61 trailer; and preparing the Phase II instrumentation plan.

  3. Integration of Product, Package, Process, and Environment: A Food System Optimization

    Science.gov (United States)

    Cooper, Maya R.; Douglas, Grace L.

    2015-01-01

    The food systems slated for future NASA missions must meet crew nutritional needs, be acceptable for consumption, and use resources efficiently. Although the current food system of prepackaged, moderately stabilized food items works well for International Space Station (ISS) missions, many of the current space menu items do not maintain acceptability and/or nutritive value beyond 2 years. Longer space missions require that the food system can sustain the crew for 3 to 5 years without replenishment. The task "Integration of Product, Package, Process, and Environment: A Food System Optimization" has the objective of optimizing food-product shelf life for the space-food system through product recipe adjustments, new packaging and processing technologies, and modified storage conditions. Two emergent food processing technologies were examined to identify a pathway to stable, wet-pack foods without the detrimental color and texture effects. Both microwave-assisted thermal sterilization (MATS) and pressure-assisted thermal stabilization (PATS) were evaluated against traditional retort processing to determine if lower heat inputs during processing would produce a product with higher micronutrient quality and longer shelf life. While MATS products did have brighter color and better texture initially, the advantages were not sustained. The non-metallized packaging film used in the process likely provided inadequate oxygen barrier. No difference in vitamin stability was evident between MATS and retort processed foods. Similarly, fruit products produced using PATS showed improved color and texture through 3 years of storage compared to retort fruit, but the vitamin stability was not improved. The final processing study involved freeze drying. Five processing factors were tested in factorial design to assess potential impact of each to the quality of freeze-dried food, including the integrity of the microstructure. The initial freezing rate and primary freeze drying

  4. Assessment and control of water contamination associated with shale oil extraction and processing. Progress report, October 1, 1979-September 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, E.J.; Henicksman, A.V.; Fox, J.P.; O' Rourke, J.A.; Wagner, P.

    1982-04-01

    The Los Alamos National Laboratory's research on assessment and control of water contamination associated with oil shale operations is directed toward the identification of potential water contamination problems and the evaluation of alternative control strategies for controlling contaminants released into the surface and underground water systems from oil-shale-related sources. Laboratory assessment activities have focused on the mineralogy, trace element concentrations in solids, and leaching characteristics of raw and spent shales from field operations and laboratory-generated spent shales. This report details the chemical, mineralogic, and solution behavior of major, minor, and trace elements in a variety of shale materials (spent shales from Occidental retort 3E at Logan Wash, raw shale from the Colony mine, and laboratory heat-treated shales generated from Colony mine raw shale). Control technology research activities have focused on the definition of control technology requirements based on assessment activities and the laboratory evaluation of alternative control strategies for mitigation of identified problems. Based on results obtained with Logan Wash materials, it appears that the overall impact of in situ processing on groundwater quality (leaching and aquifer bridging) may be less significant than previously believed. Most elements leached from MIS spent shales are already elevated in most groundwaters. Analysis indicates that solubility controls by major cations and anions will aid in mitigating water quality impacts. The exceptions include the trace elements vanadium, lead, and selenium. With respect to in situ retort leaching, process control and multistaged counterflow leaching are evaluated as alternative control strategies for mitigation of quality impacts. The results of these analyses are presented in this report.

  5. Modeling of hydrologic conditions and solute movement in processed oil shale waste embankments under simulated climatic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, T.L.; Turner, J.P.; Hasfurther, V.R.; Skinner, Q.D.

    1992-06-01

    The scope of this program is to study interacting hydrologic, geotechnical, and chemical factors affecting the behavior and disposal of combusted processed oil shale. The research combines bench-scale testing with large scale research sufficient to describe commercial scale embankment behavior. The large scale approach was accomplished by establishing five lysimeters, each 7.3 [times] 3.0 [times] 3.0 m deep, filled with processed oil shale that has been retorted and combusted by the Lurgi-Ruhrgas (Lurgi) process. Approximately 400 tons of Lurgi processed oil shale waste was provided by RBOSC to carry out this study. Research objectives were designed to evaluate hydrologic, geotechnical, and chemical properties and conditions which would affect the design and performance of large-scale embankments. The objectives of this research are: assess the unsaturated movement and redistribution of water and the development of potential saturated zones and drainage in disposed processed oil shale under natural and simulated climatic conditions; assess the unsaturated movement of solubles and major chemical constituents in disposed processed oil shale under natural and simulated climatic conditions; assess the physical and constitutive properties of the processed oil shale and determine potential changes in these properties caused by disposal and weathering by natural and simulated climatic conditions; assess the use of previously developed computer model(s) to describe the infiltration, unsaturated movement, redistribution, and drainage of water in disposed processed oil shale; evaluate the stability of field scale processed oil shale solid waste embankments using computer models.

  6. Modeling of hydrologic conditions and solute movement in processed oil shale waste embankments under simulated climatic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, T.L.; Turner, J.P.; Hasfurther, V.R.; Skinner, Q.D.

    1992-06-01

    The scope of this program is to study interacting hydrologic, geotechnical, and chemical factors affecting the behavior and disposal of combusted processed oil shale. The research combines bench-scale testing with large scale research sufficient to describe commercial scale embankment behavior. The large scale approach was accomplished by establishing five lysimeters, each 7.3 {times} 3.0 {times} 3.0 m deep, filled with processed oil shale that has been retorted and combusted by the Lurgi-Ruhrgas (Lurgi) process. Approximately 400 tons of Lurgi processed oil shale waste was provided by RBOSC to carry out this study. Research objectives were designed to evaluate hydrologic, geotechnical, and chemical properties and conditions which would affect the design and performance of large-scale embankments. The objectives of this research are: assess the unsaturated movement and redistribution of water and the development of potential saturated zones and drainage in disposed processed oil shale under natural and simulated climatic conditions; assess the unsaturated movement of solubles and major chemical constituents in disposed processed oil shale under natural and simulated climatic conditions; assess the physical and constitutive properties of the processed oil shale and determine potential changes in these properties caused by disposal and weathering by natural and simulated climatic conditions; assess the use of previously developed computer model(s) to describe the infiltration, unsaturated movement, redistribution, and drainage of water in disposed processed oil shale; evaluate the stability of field scale processed oil shale solid waste embankments using computer models.

  7. Role of spent shale in oil shale processing and the management of environmental residues. Final technical report, January 1979-May 1980

    Energy Technology Data Exchange (ETDEWEB)

    Hines, A.L.

    1980-08-15

    The adsorption of hydrogen sulfide on retorted oil shale was studied at 10, 25, and 60/sup 0/C using a packed bed method. Equilibrium isotherms were calculated from the adsorption data and were modeled by the Langmuir, Freundlich, and Polanyi equations. The isosteric heat of adsorption was calculated at three adsorbent loadings and was found to increase with increased loading. A calculated heat of adsorption less than the heat of condensation indicated that the adsorption was primarily due to Van der Waals' forces. Adsorption capacities were also found as a function of oil shale retorting temperature with the maximum uptake occurring on shale that was retorted at 750/sup 0/C.

  8. Occidental vertical modified in situ process for the recovery of oil from oil shale. Phase II. Quarterly progress report, September 1, 1980-November 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The major activities at OOSI's Logan Wash site during the quarter were: mining the voids at all levels for Retorts 7 and 8; blasthole drilling; tracer testing MR4; conducting the start-up and burner tests on MR3; continuing the surface facility construction; and conducting Retorts 7 and 8 related Rock Fragmentation tests. Environmental monitoring continued during the quarter, and the data and analyses are discussed. Sandia National Laboratory and Laramie Energy Technology Center (LETC) personnel were active in the DOE support of the MR3 burner and start-up tests. In the last section of this report the final oil inventory for Retort 6 production is detailed. The total oil produced by Retort 6 was 55,696 barrels.

  9. Processing needs and methodology for wastewaters from the conversion of coal, oil shale, and biomass to synfuels

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    The workshop identifies needs to be met by processing technology for wastewaters, and evaluates the suitability, approximate costs, and problems associated with current technology. Participation was confined to DOE Environmental Control Technology contractors to pull together and integrate past wastewater-related activities, to assess the status of synfuel wastewater treatability and process options, and to abet technology transfer. Particular attention was paid to probable or possible environmental restrictions which cannot be economically met by present technology. Primary emphasis was focussed upon process-condensate waters from coal-conversion and shale-retorting processes. Due to limited data base and time, the workshop did not deal with transients, upsets, trade-offs and system optimization, or with solids disposal. The report is divided into sections that, respectively, survey the water usage and effluent situation (II); identify the probable and possible water-treatment goals anticipated at the time when large-scale plants will be constructed (III); assess the capabilities, costs and shortcomings of present technology (IV); explore particularly severe environmental-control problems (V); give overall conclusions from the Workshop and recommendations for future research and study (VI); and, finally, present Status Reports of current work from participants in the Workshop (VII).

  10. A Novel Energy-Efficient Pyrolysis Process: Self-pyrolysis of Oil Shale Triggered by Topochemical Heat in a Horizontal Fixed Bed

    Science.gov (United States)

    Sun, You-Hong; Bai, Feng-Tian; Lü, Xiao-Shu; Li, Qiang; Liu, Yu-Min; Guo, Ming-Yi; Guo, Wei; Liu, Bao-Chang

    2015-01-01

    This paper proposes a novel energy-efficient oil shale pyrolysis process triggered by a topochemical reaction that can be applied in horizontal oil shale formations. The process starts by feeding preheated air to oil shale to initiate a topochemical reaction and the onset of self-pyrolysis. As the temperature in the virgin oil shale increases (to 250–300°C), the hot air can be replaced by ambient-temperature air, allowing heat to be released by internal topochemical reactions to complete the pyrolysis. The propagation of fronts formed in this process, the temperature evolution, and the reaction mechanism of oil shale pyrolysis in porous media are discussed and compared with those in a traditional oxygen-free process. The results show that the self-pyrolysis of oil shale can be achieved with the proposed method without any need for external heat. The results also verify that fractured oil shale may be more suitable for underground retorting. Moreover, the gas and liquid products from this method were characterised, and a highly instrumented experimental device designed specifically for this process is described. This study can serve as a reference for new ideas on oil shale in situ pyrolysis processes. PMID:25656294

  11. [Applicability of PCR methods for detection of shrimp and crab in processed food].

    Science.gov (United States)

    Taguchi, Hiromu; Nagatomi, Yasuaki; Kikuchi, Ryo; Hirao, Takashi

    2014-01-01

    According to Japanese food allergen labeling regulations, an ELISA screening test is used for detection of crustacean proteins in food and a shrimp/crab-PCR confirmation test is used to confirm a positive ELISA screening test and to exclude false positives. Forty-six kinds of processed foods labeled as containing shrimp/crab were subjected to ELISA screening test and PCR confirmation test and the usefulness of the shrimp/crab-PCR was evaluated. Twenty-seven of the 46 samples contained total crustacean protein levels of 10 ppm or more in the ELISA screening test. All of the samples were positive in the shrimp/crab-PCR confirmation test. The results of the confirmation test were consistent with the declaration in the list of ingredients and with the results of the ELISA screening test. The shrimp/crab-PCR confirmation test was demonstrated to be applicable to various kinds of foods, including powder, extract, seasoning paste, prepared frozen food, snack food, retort food and canned food.

  12. Retortable Laminate/Polymeric Food Tubes for Specialized Feeding

    Science.gov (United States)

    2012-06-01

    Advanced Food Technology School of Enviromental and Biological Sciences New Brunswick, NJ 08903 FTR 303 Defense Logistics Agency 8725 John J. Kingsman Rd...quality issues have elevated concerns over the future availability and viability of this critically important item. Quality, erosion, and availability... issues or production delays leading to loss of this tube supply source are of extreme concern to the military, as the missions which they support

  13. 9 CFR 318.305 - Equipment and procedures for heat processing systems.

    Science.gov (United States)

    2010-01-01

    ... unauthorized speed changes of the conveyor shall be provided. For example, a lock or a notice from management... speed changes on retorts shall be provided. For example, a lock or a notice from management posted at or... as resistance temperature detectors, used in lieu of mercury-in-glass thermometers, shall meet known...

  14. 9 CFR 381.305 - Equipment and procedures for heat processing systems.

    Science.gov (United States)

    2010-01-01

    ... unauthorized speed changes of the conveyor shall be provided. For example, a lock or a notice from management... speed changes on retorts shall be provided. For example, a lock or a notice from management posted at or..., such as resistance temperature detectors, shall meet known, accurate standards for such devices when...

  15. Introducing the concept of critical Fo in batch heat processing Introduzindo o conceito de Fo crítico no processamento térmico em batelada

    Directory of Open Access Journals (Sweden)

    Homero Ferracini Gumerato

    2009-12-01

    Full Text Available The determination of the sterilization value for low acid foods in retorts includes a critical evaluation of the factory's facilities and utilities, validation of the heat processing equipment (by heat distribution assays, and finally heat penetration assays with the product. The intensity of the heat process applied to the food can be expressed by the Fo value (sterilization value, in minutes, at a reference temperature of 121.1 °C, and a thermal index, z, of 10 °C, for Clostridium botulinum spores. For safety reasons, the lowest value for Fo is frequently adopted, being obtained in heat penetration assays as indicative of the minimum process intensity applied. This lowest Fo value should always be higher than the minimum Fo recommended for the food in question. However, the use of the Fo value for the coldest can fail to statistically explain all the practical occurrences in food heat treatment processes. Thus, as a result of intense experimental work, we aimed to develop a new focus to determine the lowest Fo value, which we renamed the critical Fo. The critical Fo is based on a statistical model for the interpretation of the results of heat penetration assays in packages, and it depends not only on the Fo values found at the coldest point of the package and the coldest point of the equipment, but also on the size of the batch of packages processed in the retort, the total processing time in the retort, and the time between CIPs of the retort. In the present study, we tried to explore the results of physical measurements used in the validation of food heat processes. Three examples of calculations were prepared to illustrate the methodology developed and to introduce the concept of critical Fo for the processing of canned food.A determinação do valor de esterilização de alimentos de baixa acidez em autoclaves compreende uma minuciosa avaliação das instalações e utilidades da fábrica, uma validação do equipamento de processo t

  16. Mercury mine drainage and processes that control its environmental impact

    Science.gov (United States)

    Rytuba, J.J.

    2000-01-01

    Mine drainage from mercury mines in the California Coast Range mercury mineral belt is an environmental concern because of its acidity and high sulfate, mercury, and methylmercury concentrations. Two types of mercury deposits are present in the mineral belt, silica-carbonate and hot-spring type. Mine drainage is associated with both deposit types but more commonly with the silica-carbonate type because of the extensive underground workings present at these mines. Mercury ores consisting primarily of cinnabar were processed in rotary furnaces and retorts and elemental mercury recovered from condensing systems. During the roasting process mercury phases more soluble than cinnabar are formed and concentrated in the mine tailings, commonly termed calcines. Differences in mineralogy and trace metal geochemistry between the two deposit types are reflected in mine drainage composition. Silica-carbonate type deposits have higher iron sulfide content than hot- spring type deposits and mine drainage from these deposits may have extreme acidity and very high concentrations of iron and sulfate. Mercury and methylmercury concentrations in mine drainage are relatively low at the point of discharge from mine workings. The concentration of both mercury species increases significantly in mine drainage that flows through and reacts with calcines. The soluble mercury phases in the calcines are dissolved and sulfate is added such that methylation of mercury by sulfate reducing bacteria is enhanced in calcines that are saturated with mine drainage. Where mercury mine drainage enters and first mixes with stream water, the addition of high concentrations of mercury and sulfate generates a favorable environment for methylation of mercury. Mixing of oxygenated stream water with mine drainage causes oxidation of dissolved iron(II) and precipitation of iron oxyhydroxide that accumulates in the streambed. Both mercury and methylmercury are strongly adsorbed onto iron oxyhydroxide over the p

  17. Process Accounting

    OpenAIRE

    Gilbertson, Keith

    2002-01-01

    Standard utilities can help you collect and interpret your Linux system's process accounting data. Describes the uses of process accounting, standard process accounting commands, and example code that makes use of process accounting utilities.

  18. Integrated oil production and upgrading using molten alkali metal

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Howard

    2016-10-04

    A method that combines the oil retorting process (or other process needed to obtain/extract heavy oil or bitumen) with the process for upgrading these materials using sodium or other alkali metals. Specifically, the shale gas or other gases that are obtained from the retorting/extraction process may be introduced into the upgrading reactor and used to upgrade the oil feedstock. Also, the solid materials obtained from the reactor may be used as a fuel source, thereby providing the heat necessary for the retorting/extraction process. Other forms of integration are also disclosed.

  19. Integrated oil production and upgrading using molten alkali metal

    Science.gov (United States)

    Gordon, John Howard

    2016-10-04

    A method that combines the oil retorting process (or other process needed to obtain/extract heavy oil or bitumen) with the process for upgrading these materials using sodium or other alkali metals. Specifically, the shale gas or other gases that are obtained from the retorting/extraction process may be introduced into the upgrading reactor and used to upgrade the oil feedstock. Also, the solid materials obtained from the reactor may be used as a fuel source, thereby providing the heat necessary for the retorting/extraction process. Other forms of integration are also disclosed.

  20. Zone Freezing Study for Pyrochemical Process Waste Minimization

    Energy Technology Data Exchange (ETDEWEB)

    Ammon Williams

    2012-05-01

    Pyroprocessing technology is a non-aqueous separation process for treatment of used nuclear fuel. At the heart of pyroprocessing lies the electrorefiner, which electrochemically dissolves uranium from the used fuel at the anode and deposits it onto a cathode. During this operation, sodium, transuranics, and fission product chlorides accumulate in the electrolyte salt (LiCl-KCl). These contaminates change the characteristics of the salt overtime and as a result, large volumes of contaminated salt are being removed, reprocessed and stored as radioactive waste. To reduce the storage volumes and improve recycling process for cost minimization, a salt purification method called zone freezing has been proposed at Korea Atomic Energy Research Institute (KAERI). Zone freezing is melt crystallization process similar to the vertical Bridgeman method. In this process, the eutectic salt is slowly cooled axially from top to bottom. As solidification occurs, the fission products are rejected from the solid interface and forced into the liquid phase. The resulting product is a grown crystal with the bulk of the fission products near the bottom of the salt ingot, where they can be easily be sectioned and removed. Despite successful feasibility report from KAERI on this process, there were many unexplored parameters to help understanding and improving its operational routines. Thus, this becomes the main motivation of this proposed study. The majority of this work has been focused on the CsCl-LiCl-KCl ternary salt. CeCl3-LiCl-KCl was also investigated to check whether or not this process is feasible for the trivalent species—surrogate for rare-earths and transuranics. For the main part of the work, several parameters were varied, they are: (1) the retort advancement rate—1.8, 3.2, and 5.0 mm/hr, (2) the crucible lid configurations—lid versus no-lid, (3) the amount or size of mixture—50 and 400 g, (4) the composition of CsCl in the salt—1, 3, and 5 wt%, and (5) the

  1. Meat Processing.

    Science.gov (United States)

    Legacy, Jim; And Others

    This publication provides an introduction to meat processing for adult students in vocational and technical education programs. Organized in four chapters, the booklet provides a brief overview of the meat processing industry and the techniques of meat processing and butchering. The first chapter introduces the meat processing industry and…

  2. Primary Processing

    NARCIS (Netherlands)

    Mulder, W.J.; Harmsen, P.F.H.; Sanders, J.P.M.; Carre, P.; Kamm, B.; Schoenicke, P.

    2012-01-01

    Primary processing of oil-containing material involves pre-treatment processes, oil recovery processes and the extraction and valorisation of valuable compounds from waste streams. Pre-treatment processes, e.g. thermal, enzymatic, electrical and radio frequency, have an important effect on the oil r

  3. Elektrokemiske Processer

    DEFF Research Database (Denmark)

    Bech-Nielsen, Gregers

    1997-01-01

    Electrochemical processes in: Power sources, Electrosynthesis, Corrosion.Pourbaix-diagrams.Decontamination of industrial waste water for heavy metals.......Electrochemical processes in: Power sources, Electrosynthesis, Corrosion.Pourbaix-diagrams.Decontamination of industrial waste water for heavy metals....

  4. Data processing

    CERN Document Server

    Fry, T F

    2013-01-01

    Data Processing discusses the principles, practices, and associated tools in data processing. The book is comprised of 17 chapters that are organized into three parts. The first part covers the characteristics, systems, and methods of data processing. Part 2 deals with the data processing practice; this part discusses the data input, output, and storage. The last part discusses topics related to systems and software in data processing, which include checks and controls, computer language and programs, and program elements and structures. The text will be useful to practitioners of computer-rel

  5. Process mining

    DEFF Research Database (Denmark)

    van der Aalst, W.M.P.; Rubin, V.; Verbeek, H.M.W.

    2010-01-01

    Process mining includes the automated discovery of processes from event logs. Based on observed events (e.g., activities being executed or messages being exchanged) a process model is constructed. One of the essential problems in process mining is that one cannot assume to have seen all possible...... behavior. At best, one has seen a representative subset. Therefore, classical synthesis techniques are not suitable as they aim at finding a model that is able to exactly reproduce the log. Existing process mining techniques try to avoid such “overfitting” by generalizing the model to allow for more...

  6. Sewer Processes

    DEFF Research Database (Denmark)

    Hvitved-Jacobsen, Thorkild; Vollertsen, Jes; Nielsen, Asbjørn Haaning

    by hydrogen sulfide and other volatile organic compounds, as well as other potential health issues, have caused environmental concerns to rise. Reflecting the most current developments, Sewer Processes: Microbial and Chemical Process Engineering of Sewer Networks, Second Edition, offers the reader updated...... revisions of chapters from the previous edition, adds three new chapters, and presents extensive study questions. • Presents new modeling tools for the design and operation of sewer networks • Establishes sewer processes as a key element in preserving water quality • Includes greatly expanded coverage...... of odor formation and prediction • Details the WATS sewer process model • Highlights the importance of aerobic, anoxic, and anaerobic processes Sewer Processes: Microbial and Chemical Process Engineering of Sewer Networks, Second Edition, provides a basis for up-to-date understanding and modeling of sewer...

  7. Magnetics Processing

    Data.gov (United States)

    Federal Laboratory Consortium — The Magnetics Processing Lab equipped to perform testing of magnetometers, integrate them into aircraft systems, and perform data analysis, including noise reduction...

  8. Design Processes

    DEFF Research Database (Denmark)

    Ovesen, Nis

    2009-01-01

    advantages and challenges of agile processes in mobile software and web businesses are identified. The applicability of these agile processes is discussed in re- gards to design educations and product development in the domain of Industrial Design and is briefly seen in relation to the concept of dromology......Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...

  9. Stochastic processes

    CERN Document Server

    Parzen, Emanuel

    2015-01-01

    Well-written and accessible, this classic introduction to stochastic processes and related mathematics is appropriate for advanced undergraduate students of mathematics with a knowledge of calculus and continuous probability theory. The treatment offers examples of the wide variety of empirical phenomena for which stochastic processes provide mathematical models, and it develops the methods of probability model-building.Chapter 1 presents precise definitions of the notions of a random variable and a stochastic process and introduces the Wiener and Poisson processes. Subsequent chapters examine

  10. Plan and justification for a Proof-of-Concept oil shale facility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The technology being evaluated is the Modified In-Situ (MIS) retorting process for raw shale oil production, combined with a Circulating Fluidized Bed Combustor (CFBC), for the recovery of energy from the mined shale. (VC)

  11. Plan and justification for a Proof-of-Concept oil shale facility

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The technology being evaluated is the Modified In-Situ (MIS) retorting process for raw shale oil production, combined with a Circulating Fluidized Bed Combustor (CFBC), for the recovery of energy from the mined shale. (VC)

  12. Image processing

    NARCIS (Netherlands)

    Heijden, van der F.; Spreeuwers, L.J.; Blanken, H.M.; Vries de, A.P.; Blok, H.E.; Feng, L

    2007-01-01

    The field of image processing addresses handling and analysis of images for many purposes using a large number of techniques and methods. The applications of image processing range from enhancement of the visibility of cer- tain organs in medical images to object recognition for handling by industri

  13. Sustainable processing

    DEFF Research Database (Denmark)

    Kristensen, Niels Heine

    2004-01-01

    Kristensen_NH and_Beck A: Sustainable processing. In Otto Schmid, Alexander Beck and Ursula Kretzschmar (Editors) (2004): Underlying Principles in Organic and "Low-Input Food" Processing - Literature Survey. Research Institute of Organic Agriculture FiBL, CH-5070 Frick, Switzerland. ISBN 3-906081-58-3...

  14. Process mining

    DEFF Research Database (Denmark)

    van der Aalst, W.M.P.; Rubin, V.; Verbeek, H.M.W.

    2010-01-01

    Process mining includes the automated discovery of processes from event logs. Based on observed events (e.g., activities being executed or messages being exchanged) a process model is constructed. One of the essential problems in process mining is that one cannot assume to have seen all possible...... behavior. At best, one has seen a representative subset. Therefore, classical synthesis techniques are not suitable as they aim at finding a model that is able to exactly reproduce the log. Existing process mining techniques try to avoid such “overfitting” by generalizing the model to allow for more...... behavior. This generalization is often driven by the representation language and very crude assumptions about completeness. As a result, parts of the model are “overfitting” (allow only for what has actually been observed) while other parts may be “underfitting” (allowfor much more behavior without strong...

  15. Organizing Process

    DEFF Research Database (Denmark)

    Hull Kristensen, Peer; Bojesen, Anders

    This paper invites to discuss the processes of individualization and organizing being carried out under what we might see as an emerging regime of change. The underlying argumentation is that in certain processes of change, competence becomes questionable at all times. The hazy characteristics...... of this regime of change are pursued through a discussion of competencies as opposed to qualifications illustrated by distinct cases from the Danish public sector in the search for repetitive mechanisms. The cases are put into a general perspective by drawing upon experiences from similar change processes...

  16. Grants Process

    Science.gov (United States)

    The NCI Grants Process provides an overview of the end-to-end lifecycle of grant funding. Learn about the types of funding available and the basics for application, review, award, and on-going administration within the NCI.

  17. Processing Proteases

    DEFF Research Database (Denmark)

    Ødum, Anders Sebastian Rosenkrans

    Processing proteases are proteases which proteolytically activate proteins and peptides into their biologically active form. Processing proteases play an important role in biotechnology as tools in protein fusion technology. Fusion strategies where helper proteins or peptide tags are fused...... to the protein of interest are an elaborate method to optimize expression or purification systems. It is however critical that fusion proteins can be removed and processing proteases can facilitate this in a highly specific manner. The commonly used proteases all have substrate specificities to the N...... of few known proteases to have substrate specificity for the C-terminal side of the scissile bond. LysN exhibits specificity for lysine, and has primarily been used to complement trypsin in to proteomic studies. A working hypothesis during this study was the potential of LysN as a processing protease...

  18. Electrochemical Processes

    DEFF Research Database (Denmark)

    Bech-Nielsen, Gregers

    1997-01-01

    The notes describe in detail primary and secondary galvanic cells, fuel cells, electrochemical synthesis and electroplating processes, corrosion: measurments, inhibitors, cathodic and anodic protection, details of metal dissolution reactions, Pourbaix diagrams and purification of waste water from...

  19. Sewer Processes

    DEFF Research Database (Denmark)

    Hvitved-Jacobsen, Thorkild; Vollertsen, Jes; Nielsen, Asbjørn Haaning

    and valuable information on the sewer as a chemical and biological reactor. It focuses on how to predict critical impacts and control adverse effects. It also provides an integrated description of sewer processes in modeling terms. This second edition is full of illustrative examples and figures, includes...... microbial and chemical processes and demonstrates how this knowledge can be applied for the design, operation, and the maintenance of wastewater collection systems. The authors add chemical and microbial dimensions to the design and management of sewer networks with an overall aim of improved sustainability...... by hydrogen sulfide and other volatile organic compounds, as well as other potential health issues, have caused environmental concerns to rise. Reflecting the most current developments, Sewer Processes: Microbial and Chemical Process Engineering of Sewer Networks, Second Edition, offers the reader updated...

  20. Manufacturing processes

    Science.gov (United States)

    Bennet, Jay; Brower, David; Levine, Stan; Walker, Ray; Wooten, John

    1991-01-01

    The following issues are covered: process development frequently lags behind material development, high fabrication costs, flex joints (bellows) - a continuing program, SRM fabrication-induced defects, and in-space assembly will require simplified design.

  1. In process...

    OpenAIRE

    LI Xin

    1999-01-01

    Architecture is a wonderful world. As a student of architecture, time and time again I am inpressed by its powerful imagines. The more I study and learn, however, the more I question. What is the truth beyond those fantastic imagines? What is the nuture of Architecture? Is there any basic way or process to approach the work of Architecture? With these questions, I begin my thesis project and the process of looking for answers. MArch

  2. In process...

    OpenAIRE

    LI Xin

    2000-01-01

    Architecture is a wonderful world. As a student of architecture, time and time again I am inpressed by its powerful imagines. The more I study and learn, however, the more I question. What is the truth beyond those fantastic imagines? What is the nuture of Architecture? Is there any basic way or process to approach the work of Architecture? With these questions, I begin my thesis project and the process of looking for answers.

  3. Renewal processes

    CERN Document Server

    Mitov, Kosto V

    2014-01-01

    This monograph serves as an introductory text to classical renewal theory and some of its applications for graduate students and researchers in mathematics and probability theory. Renewal processes play an important part in modeling many phenomena in insurance, finance, queuing systems, inventory control and other areas. In this book, an overview of univariate renewal theory is given and renewal processes in the non-lattice and lattice case are discussed. A pre-requisite is a basic knowledge of probability theory.

  4. Macdonald processes

    CERN Document Server

    Borodin, Alexei

    2011-01-01

    Macdonald processes are probability measures on sequences of partitions defined in terms of nonnegative specializations of the Macdonald symmetric functions and two Macdonald parameters q,t in [0,1). We prove several results about these processes, which include the following. (1) We explicitly evaluate expectations of a rich family of observables for these processes. (2) In the case t=0, we find a Fredholm determinant formula for a q-Laplace transform of the distribution of the last part of the Macdonald-random partition. (3) We introduce Markov dynamics that preserve the class of Macdonald processes and lead to new "integrable" 2d and 1d interacting particle systems. (4) In a large time limit transition, and as q goes to 1, the particles of these systems crystallize on a lattice, and fluctuations around the lattice converge to O'Connell's Whittaker process that describe semi-discrete Brownian directed polymers. (5) This yields a Fredholm determinant for the Laplace transform of the polymer partition function...

  5. Fuel Gas Demonstration Plant Program. Volume I. Demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The objective of this project is for Babcock Contractors Inc. (BCI) to provide process designs, and gasifier retort design for a fuel gas demonstration plant for Erie Mining Company at Hoyt Lake, Minnesota. The fuel gas produced will be used to supplement natural gas and fuel oil for iron ore pellet induration. The fuel gas demonstration plant will consist of five stirred, two-stage fixed-bed gasifier retorts capable of handling caking and non-caking coals, and provisions for the installation of a sixth retort. The process and unit design has been based on operation with caking coals; however, the retorts have been designed for easy conversion to handle non-caking coals. The demonstration unit has been designed to provide for expansion to a commercial plant (described in Commercial Plant Package) in an economical manner.

  6. Offshoring Process

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Sørensen, Brian Vejrum; Katayama, Hiroshi

    2011-01-01

    The purpose of this chapter is to contribute to the knowledge on how production offshoring and international operations management vary across cultural contexts. The chapter attempts to shed light on how companies approach the process of offshoring in different cultural contexts. In order...... of globalisation. Yet there are clear differences in how offshoring is conducted in Denmark and Japan. The main differences are outlined in a framework and explained employing cultural variables. The findings lead to a number of propositions suggesting that the process of offshoring is not simply a uniform...

  7. Offshoring Process

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Sørensen, Brian Vejrum; Katayama, Hiroshi

    2011-01-01

    The purpose of this chapter is to contribute to the knowledge on how production offshoring and international operations management vary across cultural contexts. The chapter attempts to shed light on how companies approach the process of offshoring in different cultural contexts. In order...... of globalisation. Yet there are clear differences in how offshoring is conducted in Denmark and Japan. The main differences are outlined in a framework and explained employing cultural variables. The findings lead to a number of propositions suggesting that the process of offshoring is not simply a uniform...

  8. Optical Processing.

    Science.gov (United States)

    1985-12-31

    34perceptron" (F. Rosenblatt, Principles of Neurodynamics ), workers in the neural network field have been seeking to understand how neural networks can perform...Moscow). 13. F. Rosenblatt, Principles of Neurodynamics , (Spartan, 1962). 14. W. Stoner "Incoherent optical processing via spatially offset pupil

  9. Innovation process

    DEFF Research Database (Denmark)

    Kolodovski, A.

    2006-01-01

    Purpose of this report: This report was prepared for RISO team involved in design of the innovation system Report provides innovation methodology to establish common understanding of the process concepts and related terminology The report does not includeRISO- or Denmark-specific cultural, econom...

  10. Processing Determinism

    Science.gov (United States)

    O'Grady, William

    2015-01-01

    I propose that the course of development in first and second language acquisition is shaped by two types of processing pressures--internal efficiency-related factors relevant to easing the burden on working memory and external input-related factors such as frequency of occurrence. In an attempt to document the role of internal factors, I consider…

  11. Processing Branches

    DEFF Research Database (Denmark)

    Schindler, Christoph; Tamke, Martin; Tabatabai, Ali;

    2014-01-01

    Angled and forked wood – a desired material until 19th century, was swept away by industrialization and its standardization of processes and materials. Contemporary information technology has the potential for the capturing and recognition of individual geometries through laser scanning and compu...

  12. BENTONITE PROCESSING

    Directory of Open Access Journals (Sweden)

    Anamarija Kutlić

    2012-07-01

    Full Text Available Bentonite has vide variety of uses. Special use of bentonite, where its absorbing properties are employed to provide water-tight sealing is for an underground repository in granites In this paper, bentonite processing and beneficiation are described.

  13. espida Process

    OpenAIRE

    Currall, James; McKinney, Peter

    2006-01-01

    Embedded in the work of espida is a process that ensures projects align themselves with the strategic aims of the funders they wish to receive resources from. It details the relationship the funder and fundee have and how outcomes of the work feedback into the organisational objectives.

  14. Photobiomodulation Process

    Directory of Open Access Journals (Sweden)

    Yang-Yi Xu

    2012-01-01

    Full Text Available Photobiomodulation (PBM is a modulation of laser irradiation or monochromatic light (LI on biosystems. There is little research on PBM dynamics although its phenomena and mechanism have been widely studied. The PBM was discussed from dynamic viewpoint in this paper. It was found that the primary process of cellular PBM might be the key process of cellular PBM so that the transition rate of cellular molecules can be extended to discuss the dose relationship of PBM. There may be a dose zone in which low intensity LI (LIL at different doses has biological effects similar to each other, so that biological information model of PBM might hold. LIL may self-adaptively modulate a chronic stress until it becomes successful.

  15. Boolean process

    Institute of Scientific and Technical Information of China (English)

    闵应骅; 李忠诚; 赵著行

    1997-01-01

    Boolean algebra successfully describes the logical behavior of a digital circuit, and has been widely used in electronic circuit design and test With the development of high speed VLSIs it is a drawback for Boolean algebra to be unable to describe circuit timing behavior. Therefore a Boolean process is defined as a family of Boolean van ables relevant to the time parameter t. A real-valued sample of a Boolean process is a waveform. Waveform functions can be manipulated formally by using mathematical tools. The distance, difference and limit of a waveform polynomial are defined, and a sufficient and necessary condition of the limit existence is presented. Based on this, the concept of sensitization is redefined precisely to demonstrate the potential and wide application possibility The new definition is very different from the traditional one, and has an impact on determining the sensitizable paths with maximum or minimum length, and false paths, and then designing and testing high performance circuits

  16. Purification process

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, A.

    1981-02-17

    A process for the removal of hydrogen sulphide from gases or liquid hydrocarbons, comprises contacting the gas or liquid hydrocarbon with an aqueous alkaline solution, preferably having a pH value of 8 to 10, comprising (A) an anthraquinone disulphonic acid or a water-soluble sulphonamide thereof (B) a compound of a metal which can exist in at least two valency states and (C) a sequestering agent.

  17. Ceramic Processing

    Energy Technology Data Exchange (ETDEWEB)

    EWSUK,KEVIN G.

    1999-11-24

    Ceramics represent a unique class of materials that are distinguished from common metals and plastics by their: (1) high hardness, stiffness, and good wear properties (i.e., abrasion resistance); (2) ability to withstand high temperatures (i.e., refractoriness); (3) chemical durability; and (4) electrical properties that allow them to be electrical insulators, semiconductors, or ionic conductors. Ceramics can be broken down into two general categories, traditional and advanced ceramics. Traditional ceramics include common household products such as clay pots, tiles, pipe, and bricks, porcelain china, sinks, and electrical insulators, and thermally insulating refractory bricks for ovens and fireplaces. Advanced ceramics, also referred to as ''high-tech'' ceramics, include products such as spark plug bodies, piston rings, catalyst supports, and water pump seals for automobiles, thermally insulating tiles for the space shuttle, sodium vapor lamp tubes in streetlights, and the capacitors, resistors, transducers, and varistors in the solid-state electronics we use daily. The major differences between traditional and advanced ceramics are in the processing tolerances and cost. Traditional ceramics are manufactured with inexpensive raw materials, are relatively tolerant of minor process deviations, and are relatively inexpensive. Advanced ceramics are typically made with more refined raw materials and processing to optimize a given property or combination of properties (e.g., mechanical, electrical, dielectric, optical, thermal, physical, and/or magnetic) for a given application. Advanced ceramics generally have improved performance and reliability over traditional ceramics, but are typically more expensive. Additionally, advanced ceramics are typically more sensitive to the chemical and physical defects present in the starting raw materials, or those that are introduced during manufacturing.

  18. Processing Proteases

    DEFF Research Database (Denmark)

    Ødum, Anders Sebastian Rosenkrans

    -terminal of the scissile bond, leaving C-terminal fusions to have non-native C-termini after processing. A solution yielding native C-termini would allow novel expression and purification systems for therapeutic proteins and peptides.The peptidyl-Lys metallopeptidase (LysN) of the fungus Armillaria mellea (Am) is one...... suitable to leave native C-termini.During this study the substrate specificity of LysN was profiled with a synthetic fluorogenic peptide library which allowed for kinetic characterization. A novel profiling method using encoded beads was proposed to efficiently profile human Renin. Recombinant expression...

  19. Hydrocarbon processing

    Energy Technology Data Exchange (ETDEWEB)

    Hill, S.G.; Seddon, D.

    1989-06-28

    A process for the catalytic conversion of synthesis-gas into a product which comprises naphtha, kerosene and distillate is characterized in that the catalyst is a Fischer-Tropsch catalyst also containing a zeolite, the naphtha fraction contains 60% or less linear paraffins and the kerosene and distillated fractions contain more linear paraffins and olefins than found in the naphtha fraction. Reduction of the relative amount of straight chain material in the naphtha fraction increases the octane number and so enhances the quality of the gasoline product, while the high quality of the kerosene and distillate fractions is maintained.

  20. Optical processing

    Science.gov (United States)

    Gustafson, S. C.

    1985-12-01

    The technical contributions were as follows: (1) Optical parallel 2-D neighborhood processor and optical processor assessment technique; (2) High accuracy with moderately accurate components and optical fredkin gate architectures; (3) Integrated optical threshold computing, pipelined polynomial processor, and all optical analog/digital converter; (4) Adaptive optical associative memory model with attention; (5) Effectiveness of parallelism and connectivity in optical computers; (6) Optical systolic array processing using an integrated acoustooptic module; (7) Optical threshold elements and networks, holographic threshold processors, adaptive matched spatial filtering, and coherence theory in optical computing; (8) Time-varying optical processing for sub-pixel targets, optical Kalman filtering, and adaptive matched filtering; (9) Optical degrees of freedom, ultra short optical pulses, number representations, content-addressable-memory processors, and integrated optical Givens rotation devices; (10) Optical J-K flip flop analysis and interfacing for optical computers; (11) Matrix multiplication algorithms and limits of incoherent optical computers; (12) Architecture for machine vision with sensor fusion, pattern recognition functions, and neural net implementations; (13) Optical computing algorithms, architectures, and components; and (14) Dynamic optical interconnections, advantages and architectures.

  1. Lithospheric processes

    Energy Technology Data Exchange (ETDEWEB)

    Baldridge, W. [and others

    2000-12-01

    The authors used geophysical, geochemical, and numerical modeling to study selected problems related to Earth's lithosphere. We interpreted seismic waves to better characterize the thickness and properties of the crust and lithosphere. In the southwestern US and Tien Shari, crust of high elevation is dynamically supported above buoyant mantle. In California, mineral fabric in the mantle correlate with regional strain history. Although plumes of buoyant mantle may explain surface deformation and magmatism, our geochemical work does not support this mechanism for Iberia. Generation and ascent of magmas remains puzzling. Our work in Hawaii constrains the residence of magma beneath Hualalai to be a few hundred to about 1000 years. In the crust, heat drives fluid and mass transport. Numerical modeling yielded robust and accurate predictions of these processes. This work is important fundamental science, and applies to mitigation of volcanic and earthquake hazards, Test Ban Treaties, nuclear waste storage, environmental remediation, and hydrothermal energy.

  2. Crystallization process

    Science.gov (United States)

    Adler, Robert J.; Brown, William R.; Auyang, Lun; Liu, Yin-Chang; Cook, W. Jeffrey

    1986-01-01

    An improved crystallization process is disclosed for separating a crystallizable material and an excluded material which is at least partially excluded from the solid phase of the crystallizable material obtained upon freezing a liquid phase of the materials. The solid phase is more dense than the liquid phase, and it is separated therefrom by relative movement with the formation of a packed bed of solid phase. The packed bed is continuously formed adjacent its lower end and passed from the liquid phase into a countercurrent flow of backwash liquid. The packed bed extends through the level of the backwash liquid to provide a drained bed of solid phase adjacent its upper end which is melted by a condensing vapor.

  3. Image Processing

    Science.gov (United States)

    1993-01-01

    Electronic Imagery, Inc.'s ImageScale Plus software, developed through a Small Business Innovation Research (SBIR) contract with Kennedy Space Flight Center for use on space shuttle Orbiter in 1991, enables astronauts to conduct image processing, prepare electronic still camera images in orbit, display them and downlink images to ground based scientists for evaluation. Electronic Imagery, Inc.'s ImageCount, a spin-off product of ImageScale Plus, is used to count trees in Florida orange groves. Other applications include x-ray and MRI imagery, textile designs and special effects for movies. As of 1/28/98, company could not be located, therefore contact/product information is no longer valid.

  4. Lycopene in tomatoes: chemical and physical properties affected by food processing.

    Science.gov (United States)

    Shi, J; Le Maguer, M

    2000-01-01

    Lycopene is the pigment principally responsible for the characteristic deep-red color of ripe tomato fruits and tomato products. It has attracted attention due to its biological and physicochemical properties, especially related to its effects as a natural antioxidant. Although it has no provitamin A activity, lycopene does exhibit a physical quenching rate constant with singlet oxygen almost twice as high as that of beta-carotene. This makes its presence in the diet of considerable interest. Increasing clinical evidence supports the role of lycopene as a micronutrient with important health benefits, because it appears to provide protection against a broad range of epithelial cancers. Tomatoes and related tomato products are the major source of lycopene compounds, and are also considered an important source of carotenoids in the human diet. Undesirable degradation of lycopene not only affects the sensory quality of the final products, but also the health benefit of tomato-based foods for the human body. Lycopene in fresh tomato fruits occurs essentially in the all-trans configuration. The main causes of tomato lycopene degradation during processing are isomerization and oxidation. Isomerization converts all-trans isomers to cis-isomers due to additional energy input and results in an unstable, energy-rich station. Determination of the degree of lycopene isomerization during processing would provide a measure of the potential health benefits of tomato-based foods. Thermal processing (bleaching, retorting, and freezing processes) generally cause some loss of lycopene in tomato-based foods. Heat induces isomerization of the all-trans to cis forms. The cis-isomers increase with temperature and processing time. In general, dehydrated and powdered tomatoes have poor lycopene stability unless carefully processed and promptly placed in a hermetically sealed and inert atmosphere for storage. A significant increase in the cis-isomers with a simultaneous decrease in the all

  5. Dynamic Processes

    Science.gov (United States)

    Klingshirn, C.

    . Phys. Lett. 92:211105, 2008). For this point, recall Figs. 6.16 and 6.33. Since the polarisation amplitude is gone in any case after the recombination process, there is an upper limit for T 2 given by T 2 ≤ 2 T1. The factor of two comes from the fact that T 2 describes the decay of an amplitude and T 1 the decay of a population, which is proportional to the amplitude squared. Sometimes T 2 is subdivided in a term due to recombination described by T 1 and another called 'pure dephasing' called T 2 ∗ with the relation 1 / T 2 = 1 / 2 T 1 + 1 / T2 ∗. The quantity T 2 ∗ can considerably exceed 2 T 1. In the part on relaxation processes that is on processes contributing to T 3, we give also examples for the capture of excitons into bound, localized, or deep states. For more details on dynamics in semiconductors in general see for example, the (text-) books [Klingshirn, Semiconductor Optics, 3rd edn. (Springer, Berlin, 2006); Haug and Koch, Quantum Theory of the Optical and Electronic Properties of Semiconductors, 4th edn. (World Scientific, Singapore, 2004); Haug and Jauho, Quantum Kinetics in Transport and Optics of Semiconductors, Springer Series in Solid State Sciences vol. 123 (Springer, Berlin, 1996); J. Shah, Ultrafast Spectroscopy of Semiconductors and of Semiconductor Nanostructures, Springer Series in Solid State Sciences vol. 115 (Springer, Berlin, 1996); Schafer and Wegener, Semiconductor Optics and Transport Phenomena (Springer, Berlin, 2002)]. We present selected data for free, bound and localized excitons, biexcitons and electron-hole pairs in an EHP and examples for bulk materials, epilayers, quantum wells, nano rods and nano crystals with the restriction that - to the knowledge of the author - data are not available for all these systems, density ranges and temperatures. Therefore, we subdivide the topic below only according to the three time constants T 2, T 3 and T 1.

  6. Data Processing

    Science.gov (United States)

    Grangeat, P.

    A new area of biology has been opened up by nanoscale exploration of the living world. This has been made possible by technological progress, which has provided the tools needed to make devices that can measure things on such length and time scales. In a sense, this is a new window upon the living world, so rich and so diverse. Many of the investigative methods described in this book seek to obtain complementary physical, chemical, and biological data to understand the way it works and the way it is organised. At these length and time scales, only dedicated instrumentation could apprehend the relevant phenomena. There is no way for our senses to observe these things directly. One important field of application is molecular medicine, which aims to explain the mechanisms of life and disease by the presence and quantification of specific molecular entities. This involves combining information about genes, proteins, cells, and organs. This in turn requires the association of instruments for molecular diagnosis, either in vitro, e.g., the microarray or the lab-on-a-chip, or in vivo, e.g., probes for molecular biopsy, and tools for molecular imaging, used to localise molecular information in living organisms in a non-invasive way. These considerations concern both preclinical research for drug design and human medical applications. With the development of DNA and RNA chips [1], genomics has revolutionised investigative methods for cells and cell processes [2,3]. By sequencing the human genome, new ways have been found for understanding the fundamental mechanisms of life [4]. A revolution is currently under way with the analysis of the proteome [5-8], i.e., the complete set of proteins that can be found in some given biological medium, such as the blood plasma. The goal is to characterise certain diseases by recognisable signatures in the proteomic profile, as determined from a blood sample or a biopsy, for example [9-13]. What is at stake is the early detection of

  7. Information Processing - Administrative Data Processing

    Science.gov (United States)

    Bubenko, Janis

    A three semester, 60-credit course package in the topic of Administrative Data Processing (ADP), offered in 1966 at Stockholm University (SU) and the Royal Institute of Technology (KTH) is described. The package had an information systems engineering orientation. The first semester focused on datalogical topics, while the second semester focused on the infological topics. The third semester aimed to deepen the students’ knowledge in different parts of ADP and at writing a bachelor thesis. The concluding section of this paper discusses various aspects of the department’s first course effort. The course package led to a concretisation of our discipline and gave our discipline an identity. Our education seemed modern, “just in time”, and well adapted to practical needs. The course package formed the first concrete activity of a group of young teachers and researchers. In a forty-year perspective, these people have further developed the department and the topic to an internationally well-reputed body of knowledge and research. The department has produced more than thirty professors and more than one hundred doctoral degrees.

  8. OIL SHALE ASH UTILIZATION IN INDUSTRIAL PROCESSES AS AN ALTERNATIVE RAW MATERIAL

    OpenAIRE

    Azeez Mohamed, Hussain; Campos, Leonel

    2016-01-01

    Oil shale is a fine-grained sedimentary rock with the potential to yield significant amounts of oil and combustible gas when retorted. Oil shale deposits have been found on almost every continent, but only Estonia, who has the 8th largest oil shale deposit in the world has continuously utilized oil shale in large scale operations. Worldwide, Estonia accounts for 80% of the overall activity involving oil shale, consuming approximately 18 million tons while producing 5–7 million tons of oil sha...

  9. Electrotechnologies to process foods

    Science.gov (United States)

    Electrical energy is being used to process foods. In conventional food processing plants, electricity drives mechanical devices and controls the degree of process. In recent years, several processing technologies are being developed to process foods directly with electricity. Electrotechnologies use...

  10. Changes in Texture and Retorting Yield in Oil Shale During Its Bioleaching by Bacillus Mucilaginosus

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xue-qing; REN He-jun; LIU Na; ZHANG Lan-ying; ZHOU Rui

    2013-01-01

    Bioleaching of oil shale by Bacillus mucilaginosus was carried out in a reaction column for 13 d.The pH value of the leaching liquor decreased steadily from 7.5 to 5.5 and the free silicon dioxide concentration reached approximately 200 mg/L in it.Scanning electron microscopy(SEM) observations revealed that a mass of small particles separated from the matrix of oil shale.Energy dispersive spectrometry(EDS) analysis implied that the total content of Si,O,A1 was decreased in the particle area of the matrix.These facts indicate that the silicate was removed,leading to the structural transformation of oil shale.Comparison of the shale oil yields before and after bioleaching illustrated that approximately 10% extra shale oil was obtained.This finding suggests that the demineralisation of the oil shale by silicate bacteria improves shale oil yield.

  11. Studies on process synthesis and process integration

    OpenAIRE

    Fien, Gert-Jan A. F.

    1994-01-01

    This thesis discusses topics in the field of process engineering that have received much attention over the past twenty years: (1) conceptual process synthesis using heuristic shortcut methods and (2) process integration through heat-exchanger networks and energy-saving power and refrigeration systems. The shortcut methods for conceptual process synthesis presented in Chapter 2, utilize Residue Curve Maps in ternary diagrams and are illustrated with examples of processes...

  12. Extensible packet processing architecture

    Science.gov (United States)

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  13. Extensible packet processing architecture

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  14. Process mineralogy IX

    Energy Technology Data Exchange (ETDEWEB)

    Petruk, W.; Hagni, R.D.; Pignolet-Brandom, S.; Hausen, D.M. (eds.) (Canada Centre for Mineral and Energy Technology, Ottawa, ON (Canada))

    1990-01-01

    54 papers are presented under the headings: keynote address; process mineralogy applications to mineral processing; process mineralogy applications to gold; process mineralogy applications to pyrometallurgy and hydrometallurgy; process mineralogy applications to environment and health; and process mineralogy applications to synthetic materials. Subject and author indexes are provided. Three papers have been abstracted separately.

  15. Refactoring Process Models in Large Process Repositories.

    NARCIS (Netherlands)

    Weber, B.; Reichert, M.U.

    2008-01-01

    With the increasing adoption of process-aware information systems (PAIS), large process model repositories have emerged. Over time respective models have to be re-aligned to the real-world business processes through customization or adaptation. This bears the risk that model redundancies are introdu

  16. Thinning spatial point processes into Poisson processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Schoenberg, Frederic Paik

    2010-01-01

    are identified, and where we simulate backwards and forwards in order to obtain the thinned process. In the case of a Cox process, a simple independent thinning technique is proposed. In both cases, the thinning results in a Poisson process if and only if the true Papangelou conditional intensity is used, and...

  17. Thinning spatial point processes into Poisson processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Schoenberg, Frederic Paik

    , and where one simulates backwards and forwards in order to obtain the thinned process. In the case of a Cox process, a simple independent thinning technique is proposed. In both cases, the thinning results in a Poisson process if and only if the true Papangelou conditional intensity is used, and thus can...

  18. Refactoring Process Models in Large Process Repositories.

    NARCIS (Netherlands)

    Weber, B.; Reichert, M.U.

    With the increasing adoption of process-aware information systems (PAIS), large process model repositories have emerged. Over time respective models have to be re-aligned to the real-world business processes through customization or adaptation. This bears the risk that model redundancies are

  19. The permanental process

    DEFF Research Database (Denmark)

    McCullagh, Peter; Møller, Jesper

    2006-01-01

    We extend the boson process first to a large class of Cox processes and second to an even larger class of infinitely divisible point processes. Density and moment results are studied in detail. These results are obtained in closed form as weighted permanents, so the extension i called a permanental...... process. Temporal extensions and a particularly tractable case of the permanental process are also studied. Extensions of the fermion process along similar lines, leading to so-called determinantal processes, are discussed....

  20. Food Processing and Allergenicity

    NARCIS (Netherlands)

    Verhoeckx, K.; Vissers, Y.; Baumert, J.L.; Faludi, R.; Fleys, M.; Flanagan, S.; Herouet-Guicheney, C.; Holzhauser, T.; Shimojo, R.; Bolt, van der Nieke; Wichers, H.J.; Kimber, I.

    2015-01-01

    Food processing can have many beneficial effects. However, processing may also alter the allergenic properties of food proteins. A wide variety of processing methods is available and their use depends largely on the food to be processed.

    In this review the impact of processing (heat and non

  1. Food processing and allergenicity

    NARCIS (Netherlands)

    Verhoeckx, K.C.M.; Vissers, Y.M.; Baumert, J.L.; Faludi, R.; Feys, M.; Flanagan, S.; Herouet-Guicheney, C.; Holzhauser, T.; Shimojo, R.; Bolt, N. van der; Wichers, H.; Kimber, I.

    2015-01-01

    Food processing can have many beneficial effects. However, processing may also alter the allergenic properties of food proteins. A wide variety of processing methods is available and their use depends largely on the food to be processed. In this review the impact of processing (heat and non-heat tre

  2. SAR processing using SHARC signal processing systems

    Science.gov (United States)

    Huxtable, Barton D.; Jackson, Christopher R.; Skaron, Steve A.

    1998-09-01

    Synthetic aperture radar (SAR) is uniquely suited to help solve the Search and Rescue problem since it can be utilized either day or night and through both dense fog or thick cloud cover. Other papers in this session, and in this session in 1997, describe the various SAR image processing algorithms that are being developed and evaluated within the Search and Rescue Program. All of these approaches to using SAR data require substantial amounts of digital signal processing: for the SAR image formation, and possibly for the subsequent image processing. In recognition of the demanding processing that will be required for an operational Search and Rescue Data Processing System (SARDPS), NASA/Goddard Space Flight Center and NASA/Stennis Space Center are conducting a technology demonstration utilizing SHARC multi-chip modules from Boeing to perform SAR image formation processing.

  3. INTEGRATED RENEWAL PROCESS

    Directory of Open Access Journals (Sweden)

    Suyono .

    2012-07-01

    Full Text Available The marginal distribution of integrated renewal process is derived in this paper. Our approach is based on the theory of point processes, especially Poisson point processes. The results are presented in the form of Laplace transforms.

  4. Integrated Process Capability Analysis

    Institute of Scientific and Technical Information of China (English)

    Chen; H; T; Huang; M; L; Hung; Y; H; Chen; K; S

    2002-01-01

    Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best spec...

  5. Product Development Process Modeling

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The use of Concurrent Engineering and other modern methods of product development and maintenance require that a large number of time-overlapped "processes" be performed by many people. However, successfully describing and optimizing these processes are becoming even more difficult to achieve. The perspective of industrial process theory (the definition of process) and the perspective of process implementation (process transition, accumulation, and inter-operations between processes) are used to survey the method used to build one base model (multi-view) process model.

  6. From Process Understanding to Process Control

    NARCIS (Netherlands)

    Streefland, M.

    2010-01-01

    A licensed pharmaceutical process is required to be executed within the validated ranges throughout the lifetime of product manufacturing. Changes to the process usually require the manufacturer to demonstrate that the safety and efficacy of the product remains unchanged. Recent changes in the regul

  7. Business Process Redesign: Design the Improved Process

    Science.gov (United States)

    1993-09-01

    64 C. MULTIVOTING ......... .................. .. 65 D. ELECTRONIC VOTING TECHNOLOGY ... ......... .. 65 v E. PAIRED...PROCESS IMPROVEMENT PROCESS (PIP) Diagram of each Activity (AI-A4) ......... .. 122 vi APPENDIX D: PRODUCTS AND VENDORS WHICH SUPPORT ELECTRONIC VOTING ............. 126...requirements. D. ELECTRONIC VOTING TECHNOLOGY Nunamaker [1992] suggests that traditional voting usual- ly happens at the end of a discussion, to close

  8. Process Intensification: A Perspective on Process Synthesis

    DEFF Research Database (Denmark)

    Lutze, Philip; Gani, Rafiqul; Woodley, John

    2010-01-01

    In recent years, process intensification (PI) has attracted considerable academic interest as a potential means for process improvement, to meet the increasing demands for sustainable production. A variety of intensified operations developed in academia and industry creates a large number of opti...

  9. Idaho Chemical Processing Plant Process Efficiency improvements

    Energy Technology Data Exchange (ETDEWEB)

    Griebenow, B.

    1996-03-01

    In response to decreasing funding levels available to support activities at the Idaho Chemical Processing Plant (ICPP) and a desire to be cost competitive, the Department of Energy Idaho Operations Office (DOE-ID) and Lockheed Idaho Technologies Company have increased their emphasis on cost-saving measures. The ICPP Effectiveness Improvement Initiative involves many activities to improve cost effectiveness and competitiveness. This report documents the methodology and results of one of those cost cutting measures, the Process Efficiency Improvement Activity. The Process Efficiency Improvement Activity performed a systematic review of major work processes at the ICPP to increase productivity and to identify nonvalue-added requirements. A two-phase approach was selected for the activity to allow for near-term implementation of relatively easy process modifications in the first phase while obtaining long-term continuous improvement in the second phase and beyond. Phase I of the initiative included a concentrated review of processes that had a high potential for cost savings with the intent of realizing savings in Fiscal Year 1996 (FY-96.) Phase II consists of implementing long-term strategies too complex for Phase I implementation and evaluation of processes not targeted for Phase I review. The Phase II effort is targeted for realizing cost savings in FY-97 and beyond.

  10. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...... and technology factors in organizations. Theoretical implications call for a design-oriented view of technology and process alignment....

  11. IMPLEMENTING BUSINESS PROCESS MANAGEMENT

    OpenAIRE

    Vlad BALANESCU; Mihaela MASCU

    2014-01-01

    Business Process Management (BPM) is considered to be the third wave in business process theory. Appearing as a response to the critique formulated regarding Business Process Reengineering, BPM tries to be a more holistic and integrated approach to management and processes. In a time where complex solutions are needed solution that incorporates elements from various concepts, Business Process Management can be, in my opinion, a link between these ideas. After a short introduction presenting g...

  12. Thin film processes

    CERN Document Server

    Vossen, John L

    1978-01-01

    Remarkable advances have been made in recent years in the science and technology of thin film processes for deposition and etching. It is the purpose of this book to bring together tutorial reviews of selected filmdeposition and etching processes from a process viewpoint. Emphasis is placed on the practical use of the processes to provide working guidelines for their implementation, a guide to the literature, and an overview of each process.

  13. Business process transformation the process tangram framework

    CERN Document Server

    Sharma, Chitra

    2015-01-01

    This book presents a framework through transformation and explains  how business goals can be translated into realistic plans that are tangible and yield real results in terms of the top line and the bottom line. Process Transformation is like a tangram puzzle, which has multiple solutions yet is essentially composed of seven 'tans' that hold it together. Based on practical experience and intensive research into existing material, 'Process Tangram' is a simple yet powerful framework that proposes Process Transformation as a program. The seven 'tans' are: the transformation program itself, triggers, goals, tools and techniques, culture, communication and success factors. With its segregation into tans and division into core elements, this framework makes it possible to use 'pick and choose' to quickly and easily map an organization's specific requirements. Change management and process modeling are covered in detail. In addition, the book approaches managed services as a model of service delivery, which it ex...

  14. Process innovation laboratory

    DEFF Research Database (Denmark)

    Møller, Charles

    2007-01-01

    Most organizations today are required not only to operate effective business processes but also to allow for changing business conditions at an increasing rate. Today nearly every business relies on their enterprise information systems (EIS) for process integration and future generations of EIS...... will increasingly be driven by business process models. Consequently business process modelling and improvement is becoming a serious challenge. The aim of this paper is to establish a conceptual framework for business process innovation (BPI) in the supply chain based on advanced EIS. The challenge is thus...... to create a new methodology for developing and exploring process models and applications. The paper outlines the process innovation laboratory as a new approach to BPI. The process innovation laboratory is a comprehensive framework and a collaborative workspace for experimenting with process models...

  15. Metallurgical process engineering

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Ruiyu [Central Iron and Steel Research Institute (CISRI), Beijing (China)

    2011-07-01

    ''Metallurgical Process Engineering'' discusses large-scale integrated theory on the level of manufacturing production processes, putting forward concepts for exploring non-equilibrium and irreversible complex system. It emphasizes the dynamic and orderly operation of the steel plant manufacturing process, the major elements of which are the flow, process network and program. The book aims at establishing a quasi-continuous and continuous process system for improving several techno-economic indices, minimizing dissipation and enhancing the market competitiveness and sustainability of steel plants. The book is intended for engineers, researchers and managers in the fields of metallurgical engineering, industrial design, and process engineering. (orig.)

  16. Acoustic signal processing toolbox for array processing

    Science.gov (United States)

    Pham, Tien; Whipps, Gene T.

    2003-08-01

    The US Army Research Laboratory (ARL) has developed an acoustic signal processing toolbox (ASPT) for acoustic sensor array processing. The intent of this document is to describe the toolbox and its uses. The ASPT is a GUI-based software that is developed and runs under MATLAB. The current version, ASPT 3.0, requires MATLAB 6.0 and above. ASPT contains a variety of narrowband (NB) and incoherent and coherent wideband (WB) direction-of-arrival (DOA) estimation and beamforming algorithms that have been researched and developed at ARL. Currently, ASPT contains 16 DOA and beamforming algorithms. It contains several different NB and WB versions of the MVDR, MUSIC and ESPRIT algorithms. In addition, there are a variety of pre-processing, simulation and analysis tools available in the toolbox. The user can perform simulation or real data analysis for all algorithms with user-defined signal model parameters and array geometries.

  17. Secure Processing Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Secure Processing Lab is the center of excellence for new and novel processing techniques for the formation, calibration and analysis of radar. In addition, this...

  18. Business Process Inventory

    Data.gov (United States)

    Office of Personnel Management — Inventory of maps and descriptions of the business processes of the U.S. Office of Personnel Management (OPM), with an emphasis on the processes of the Office of the...

  19. Radiochemical Processing Laboratory (RPL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Radiochemical Processing Laboratory (RPL)�is a scientific facility funded by DOE to create and implement innovative processes for environmental clean-up and...

  20. Natural Language Processing.

    Science.gov (United States)

    Chowdhury, Gobinda G.

    2003-01-01

    Discusses issues related to natural language processing, including theoretical developments; natural language understanding; tools and techniques; natural language text processing systems; abstracting; information extraction; information retrieval; interfaces; software; Internet, Web, and digital library applications; machine translation for…

  1. Dairy processing, Improving quality

    NARCIS (Netherlands)

    Smit, G.

    2003-01-01

    This book discusses raw milk composition, production and quality, and reviews developments in processing from hygiene and HACCP systems to automation, high-pressure processing and modified atmosphere packaging.

  2. Group Decision Process Support

    DEFF Research Database (Denmark)

    Gøtze, John; Hijikata, Masao

    1997-01-01

    Introducing the notion of Group Decision Process Support Systems (GDPSS) to traditional decision-support theorists.......Introducing the notion of Group Decision Process Support Systems (GDPSS) to traditional decision-support theorists....

  3. Towards better process understanding

    DEFF Research Database (Denmark)

    Matero, Sanni Elina; van der Berg, Franciscus Winfried J; Poutiainen, Sami

    2013-01-01

    , current best practice to control a typical process is to not allow process-related factors to vary i.e. lock the production parameters. The problem related to the lack of sufficient process understanding is still there: the variation within process and material properties is an intrinsic feature...... and cannot be compensated for with constant process parameters. Instead, a more comprehensive approach based on the use of multivariate tools for investigating processes should be applied. In the pharmaceutical field these methods are referred to as Process Analytical Technology (PAT) tools that aim...... to achieve a thorough understanding and control over the production process. PAT includes the frames for measurement as well as data analyzes and controlling for in-depth understanding, leading to more consistent and safer drug products with less batch rejections. In the optimal situation, by applying...

  4. Cognitive processes in CBT

    NARCIS (Netherlands)

    Becker, E.S.; Vrijsen, J.N.

    2017-01-01

    Automatic cognitive processing helps us navigate the world. However, if the emotional and cognitive interplay becomes skewed, those cognitive processes can become maladaptive and result in psychopathology. Although biases are present in most mental disorders, different disorders are characterized by

  5. Infrared processing of foods

    Science.gov (United States)

    Infrared (IR) processing of foods has been gaining popularity over conventional processing in several unit operations, including drying, peeling, baking, roasting, blanching, pasteurization, sterilization, disinfection, disinfestation, cooking, and popping . It has shown advantages over conventional...

  6. News: Process intensification

    Science.gov (United States)

    Conservation of materials and energy is a major objective to the philosophy of sustainability. Where production processes can be intensified to assist these objectives, significant advances have been developed to assist conservation as well as cost. Process intensification (PI) h...

  7. Polyamines in tea processing.

    Science.gov (United States)

    Palavan-Unsal, Narcin; Arisan, Elif Damla; Terzioglu, Salih

    2007-06-01

    The distribution of dietary polyamines, putrescine, spermidine and spermine, was determined during processing of Camellia sinensis. Black tea manufacture is carried by a series of processes on fresh tea leaves involving withering, rolling, fermentation, drying and sieving. The aim of this research was to determine the effect of tea processing on the polyamine content in relation with antioxidant enzymes, superoxide dismutase, lipid peroxidase and glutathione peroxidase. Before processing, the spermine content was much higher than the putrescine and spermidine content in green tea leaves. Spermine was significantly decreased during processing while the putrescine and spermine contents increased during withered and rolling and decreased in the following stages. The superoxide dismutase activity increased at the withering stage and declined during processing. The transcript level of the polyamine biosynthesis-responsible enzyme ornithine decarboxylase was reduced during each processing step. This study reveals the importance of protection of nutritional compounds that are essential for health during the manufacturing process.

  8. Drug Development Process

    Science.gov (United States)

    ... Device Approvals The Drug Development Process The Drug Development Process Share Tweet Linkedin Pin it More sharing ... Pin it Email Print Step 1 Discovery and Development Discovery and Development Research for a new drug ...

  9. Stochastic processes - quantum physics

    Energy Technology Data Exchange (ETDEWEB)

    Streit, L. (Bielefeld Univ. (Germany, F.R.))

    1984-01-01

    The author presents an elementary introduction to stochastic processes. He starts from simple quantum mechanics and considers problems in probability, finally presenting quantum dynamics in terms of stochastic processes.

  10. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  11. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  12. Dosimetry for radiation processing

    DEFF Research Database (Denmark)

    Miller, Arne

    1986-01-01

    During the past few years significant advances have taken place in the different areas of dosimetry for radiation processing, mainly stimulated by the increased interest in radiation for food preservation, plastic processing and sterilization of medical products. Reference services both...... and sterilization dosimetry, optichromic dosimeters in the shape of small tubes for food processing, and ESR spectroscopy of alanine for reference dosimetry. In this paper the special features of radiation processing dosimetry are discussed, several commonly used dosimeters are reviewed, and factors leading...

  13. Modeling multiphase materials processes

    CERN Document Server

    Iguchi, Manabu

    2010-01-01

    ""Modeling Multiphase Materials Processes: Gas-Liquid Systems"" describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of

  14. Grind hardening process

    CERN Document Server

    Salonitis, Konstantinos

    2015-01-01

    This book presents the grind-hardening process and the main studies published since it was introduced in 1990s.  The modelling of the various aspects of the process, such as the process forces, temperature profile developed, hardness profiles, residual stresses etc. are described in detail. The book is of interest to the research community working with mathematical modeling and optimization of manufacturing processes.

  15. Continuous sodium modification of nearly-eutectic aluminium alloys. Part II. Experimental studiem

    Directory of Open Access Journals (Sweden)

    Białobrzeski A.

    2007-01-01

    Full Text Available One of the possible means of continuous sodium modification of nearly-eutectic alloys may be continuous electrolysis of sodium compounds (salts, taking place directly in metal bath (in the crucible. For this process it is necessary to use a solid electrolyte conducting sodium ions. Under the effect of the applied direct current voltage, sodium salt placed in a retort made from the solid electrolyte undergoes dissociation, and next - electrolysis. The retort is immersed in liquid metal. The anode is sodium salt, at that temperature occurring in liquid state, connected to the direct current source through, e.g. a graphite electrode, while cathode is the liquid metal. Sodium ions formed during the sodium salt dissociation and electrolysis are transported through the wall of the solid electrolyte (the material of the retort and in contact with liquid alloy acting as a cathode, they are passing into atomic state, modifying the metal bath.

  16. Semisolid Metal Processing Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Apelian,Diran

    2002-01-10

    Mathematical modeling and simulations of semisolid filling processes remains a critical issue in understanding and optimizing the process. Semisolid slurries are non-Newtonian materials that exhibit complex rheological behavior. There the way these slurries flow in cavities is very different from the way liquid in classical casting fills cavities. Actually filling in semisolid processing is often counter intuitive

  17. Clinical Process Intelligence

    DEFF Research Database (Denmark)

    Vilstrup Pedersen, Klaus

    2006-01-01

    .e. local guidelines. From a knowledge management point of view, this externalization of generalized processes, gives the opportunity to learn from, evaluate and optimize the processes. "Clinical Process Intelligence" (CPI), will denote the goal of getting generalized insight into patient centered health...

  18. Auditory processing models

    DEFF Research Database (Denmark)

    Dau, Torsten

    2008-01-01

    The Handbook of Signal Processing in Acoustics will compile the techniques and applications of signal processing as they are used in the many varied areas of Acoustics. The Handbook will emphasize the interdisciplinary nature of signal processing in acoustics. Each Section of the Handbook will pr...

  19. Teaching Process Design through Integrated Process Synthesis

    Science.gov (United States)

    Metzger, Matthew J.; Glasser, Benjamin J.; Patel, Bilal; Hildebrandt, Diane; Glasser, David

    2012-01-01

    The design course is an integral part of chemical engineering education. A novel approach to the design course was recently introduced at the University of the Witwatersrand, Johannesburg, South Africa. The course aimed to introduce students to systematic tools and techniques for setting and evaluating performance targets for processes, as well as…

  20. Thin film processes II

    CERN Document Server

    Kern, Werner

    1991-01-01

    This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.Key Features* Provides an all-new sequel to the 1978 classic, Thin Film Processes* Introduces new topics, and sever

  1. Silicon production process evaluations

    Science.gov (United States)

    1982-01-01

    Chemical engineering analyses involving the preliminary process design of a plant (1,000 metric tons/year capacity) to produce silicon via the technology under consideration were accomplished. Major activities in the chemical engineering analyses included base case conditions, reaction chemistry, process flowsheet, material balance, energy balance, property data, equipment design, major equipment list, production labor and forward for economic analysis. The process design package provided detailed data for raw materials, utilities, major process equipment and production labor requirements necessary for polysilicon production in each process.

  2. Data processing made simple

    CERN Document Server

    Wooldridge, Susan

    2013-01-01

    Data Processing: Made Simple, Second Edition presents discussions of a number of trends and developments in the world of commercial data processing. The book covers the rapid growth of micro- and mini-computers for both home and office use; word processing and the 'automated office'; the advent of distributed data processing; and the continued growth of database-oriented systems. The text also discusses modern digital computers; fundamental computer concepts; information and data processing requirements of commercial organizations; and the historical perspective of the computer industry. The

  3. Biomass process handbook

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Descriptions are given of 42 processes which use biomass to produce chemical products. Marketing and economic background, process description, flow sheets, costs, major equipment, and availability of technology are given for each of the 42 processes. Some of the chemicals discussed are: ethanol, ethylene, acetaldehyde, butanol, butadiene, acetone, citric acid, gluconates, itaconic acid, lactic acid, xanthan gum, sorbitol, starch polymers, fatty acids, fatty alcohols, glycerol, soap, azelaic acid, perlargonic acid, nylon-11, jojoba oil, furfural, furfural alcohol, tetrahydrofuran, cellulose polymers, products from pulping wastes, and methane. Processes include acid hydrolysis, enzymatic hydrolysis, fermentation, distillation, Purox process, and anaerobic digestion.

  4. Colloid process engineering

    CERN Document Server

    Peukert, Wolfgang; Rehage, Heinz; Schuchmann, Heike

    2015-01-01

    This book deals with colloidal systems in technical processes and the influence of colloidal systems by technical processes. It explores how new measurement capabilities can offer the potential for a dynamic development of scientific and engineering, and examines the origin of colloidal systems and its use for new products. The future challenges to colloidal process engineering are the development of appropriate equipment and processes for the production and obtainment of multi-phase structures and energetic interactions in market-relevant quantities. The book explores the relevant processes and for controlled production and how they can be used across all scales.

  5. Process-based costing.

    Science.gov (United States)

    Lee, Robert H; Bott, Marjorie J; Forbes, Sarah; Redford, Linda; Swagerty, Daniel L; Taunton, Roma Lee

    2003-01-01

    Understanding how quality improvement affects costs is important. Unfortunately, low-cost, reliable ways of measuring direct costs are scarce. This article builds on the principles of process improvement to develop a costing strategy that meets both criteria. Process-based costing has 4 steps: developing a flowchart, estimating resource use, valuing resources, and calculating direct costs. To illustrate the technique, this article uses it to cost the care planning process in 3 long-term care facilities. We conclude that process-based costing is easy to implement; generates reliable, valid data; and allows nursing managers to assess the costs of new or modified processes.

  6. Dynamical laser spike processing

    CERN Document Server

    Shastri, Bhavin J; Tait, Alexander N; Rodriguez, Alejandro W; Wu, Ben; Prucnal, Paul R

    2015-01-01

    Novel materials and devices in photonics have the potential to revolutionize optical information processing, beyond conventional binary-logic approaches. Laser systems offer a rich repertoire of useful dynamical behaviors, including the excitable dynamics also found in the time-resolved "spiking" of neurons. Spiking reconciles the expressiveness and efficiency of analog processing with the robustness and scalability of digital processing. We demonstrate that graphene-coupled laser systems offer a unified low-level spike optical processing paradigm that goes well beyond previously studied laser dynamics. We show that this platform can simultaneously exhibit logic-level restoration, cascadability and input-output isolation---fundamental challenges in optical information processing. We also implement low-level spike-processing tasks that are critical for higher level processing: temporal pattern detection and stable recurrent memory. We study these properties in the context of a fiber laser system, but the addit...

  7. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    Three review articles are presented. The first describes the Lawrence Livermore Laboratory role in the research and development of oil-shale retorting technology through its studies of the relevant chemical and physical processes, mathematical models, and new retorting concepts. Second is a discussion of investigation of properties of dense molecular fluids at high pressures and temperatures to improve understanding of high-explosive behavior, giant-planet structure, and hydrodynamic shock interactions. Third, by totally computerizing the triple-quadrupole mass spectrometer system, the laboratory has produced a general-purpose instrument of unrivaled speed, selectivity, and adaptability for the analysis and identification of trace organic constituents in complex chemical mixtures. (GHT)

  8. A secondary fuel removal process: plasma processing

    Energy Technology Data Exchange (ETDEWEB)

    Min, J. Y.; Kim, Y. S. [Hanyang Univ., Seoul (Korea, Republic of); Bae, K. K.; Yang, M. S. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-07-01

    Plasma etching process of UO{sub 2} by using fluorine containing gas plasma is studied as a secondary fuel removal process for DUPIC (Direct Use of PWR spent fuel Into Candu) process which is taken into consideration for potential future fuel cycle in Korea. CF{sub 4}/O{sub 2} gas mixture is chosen for reactant gas and the etching rates of UO{sub 2} by the gas plasma are investigated as functions of CF{sub 4}/O{sub 2} ratio, plasma power, substrate temperature, and plasma gas pressure. It is found that the optimum CF{sub 4}/O{sub 2} ratio is around 4:1 at all temperatures up to 400 deg C and the etching rate increases with increasing r.f. power and substrate temperature. Under 150W r.f. power the etching rate reaches 1100 monolayers/min at 400 deg C, which is equivalent to about 0.5mm/min. (author).

  9. Pultrusion process characterization

    Science.gov (United States)

    Vaughan, James G.; Hackett, Robert M.

    1991-01-01

    Pultrusion is a process through which high-modulus, lightweight composite structural members such as beams, truss components, stiffeners, etc., are manufactured. The pultrusion process, though a well-developed processing art, lacks a fundamental scientific understanding. The objective here was to determine, both experimentally and analytically, the process parameters most important in characterizing and optimizing the pultrusion of uniaxial fibers. The effects of process parameter interactions were experimentally examined as a function of the pultruded product properties. A numerical description based on these experimental results was developed. An analytical model of the pultrusion process was also developed. The objective of the modeling effort was the formulation of a two-dimensional heat transfer model and development of solutions for the governing differential equations using the finite element method.

  10. Badge Office Process Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Haurykiewicz, John Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dinehart, Timothy Grant [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parker, Robert Young [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-12

    The purpose of this process analysis was to analyze the Badge Offices’ current processes from a systems perspective and consider ways of pursuing objectives set forth by SEC-PS, namely increased customer flow (throughput) and reduced customer wait times. Information for the analysis was gathered for the project primarily through Badge Office Subject Matter Experts (SMEs), and in-person observation of prevailing processes. Using the information gathered, a process simulation model was constructed to represent current operations and allow assessment of potential process changes relative to factors mentioned previously. The overall purpose of the analysis was to provide SEC-PS management with information and recommendations to serve as a basis for additional focused study and areas for potential process improvements in the future.

  11. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...... between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...

  12. Decomposability for stable processes

    CERN Document Server

    Wang, Yizao; Roy, Parthanil

    2011-01-01

    We characterize all possible independent symmetric $\\alpha$-stable (S$\\alpha$S) components of a non--Gaussian S$\\alpha$S process, $0<\\alpha<2$. In particular, we characterize the independent stationary S$\\alpha$S components of a stationary S$\\alpha$S process. One simple consequence of our characterization is that all stationary components of the S$\\alpha$S moving average processes are trivial. As a main application, we show that the standard Brown--Resnick process has a moving average representation. This complements a result of Kabluchko et al. (2009), who obtained mixed moving average representations for these processes. We also develop a parallel characterization theory for max-stable processes.

  13. Clinical Process Intelligence

    DEFF Research Database (Denmark)

    Vilstrup Pedersen, Klaus

    2006-01-01

    .e. local guidelines. From a knowledge management point of view, this externalization of generalized processes, gives the opportunity to learn from, evaluate and optimize the processes. "Clinical Process Intelligence" (CPI), will denote the goal of getting generalized insight into patient centered health......, generalized processes de-ducted from many patient cases and clinical guidelines, are all guidelines that may be used in clinical reasoning. The differ-ence is the validity of the suggested actions and decisions. In the case of generalized processes deducted from EMRs, we have "what we usually do" practice i...... care processes by means of statistical, OLAP and data mining tech-niques, with the aim of refining clinical guidelines, develop local guidelines and facilitate outcome predictions....

  14. Linearity in Process Languages

    DEFF Research Database (Denmark)

    Nygaard, Mikkel; Winskel, Glynn

    2002-01-01

    The meaning and mathematical consequences of linearity (managing without a presumed ability to copy) are studied for a path-based model of processes which is also a model of affine-linear logic. This connection yields an affine-linear language for processes, automatically respecting open-map bisi......The meaning and mathematical consequences of linearity (managing without a presumed ability to copy) are studied for a path-based model of processes which is also a model of affine-linear logic. This connection yields an affine-linear language for processes, automatically respecting open......-map bisimulation, in which a range of process operations can be expressed. An operational semantics is provided for the tensor fragment of the language. Different ways to make assemblies of processes lead to different choices of exponential, some of which respect bisimulation....

  15. Business Process Modeling: Blueprinting

    OpenAIRE

    Al-Fedaghi, Sabah

    2017-01-01

    This paper presents a flow-based methodology for capturing processes specified in business process modeling. The proposed methodology is demonstrated through re-modeling of an IBM Blueworks case study. While the Blueworks approach offers a well-proven tool in the field, this should not discourage workers from exploring other ways of thinking about effectively capturing processes. The diagrammatic representation presented here demonstrates a viable methodology in this context. It is hoped this...

  16. Basic digital signal processing

    CERN Document Server

    Lockhart, Gordon B

    1985-01-01

    Basic Digital Signal Processing describes the principles of digital signal processing and experiments with BASIC programs involving the fast Fourier theorem (FFT). The book reviews the fundamentals of the BASIC program, continuous and discrete time signals including analog signals, Fourier analysis, discrete Fourier transform, signal energy, power. The text also explains digital signal processing involving digital filters, linear time-variant systems, discrete time unit impulse, discrete-time convolution, and the alternative structure for second order infinite impulse response (IIR) sections.

  17. Transnational Learning Processes

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    This paper analyses and compares the transnational learning processes in the employment field in the European Union and among the Nordic countries. Based theoretically on a social constructivist model of learning and methodologically on a questionnaire distributed to the relevant participants......, a number of hypotheses concerning transnational learning processes are tested. The paper closes with a number of suggestions regarding an optimal institutional setting for facilitating transnational learning processes.Key words: Transnational learning, Open Method of Coordination, Learning, Employment...

  18. Polygon mesh processing

    CERN Document Server

    Botsch, Mario; Pauly, Mark; Alliez, Pierre; Levy, Bruno

    2010-01-01

    Geometry processing, or mesh processing, is a fast-growing area of research that uses concepts from applied mathematics, computer science, and engineering to design efficient algorithms for the acquisition, reconstruction, analysis, manipulation, simulation, and transmission of complex 3D models. Applications of geometry processing algorithms already cover a wide range of areas from multimedia, entertainment, and classical computer-aided design, to biomedical computing, reverse engineering, and scientific computing. Over the last several years, triangle meshes have become increasingly popular,

  19. Scientific information processing procedures

    Directory of Open Access Journals (Sweden)

    García, Maylin

    2013-07-01

    Full Text Available The paper systematizes several theoretical view-points on scientific information processing skill. It decomposes the processing skills into sub-skills. Several methods such analysis, synthesis, induction, deduction, document analysis were used to build up a theoretical framework. Interviews and survey to professional being trained and a case study was carried out to evaluate the results. All professional in the sample improved their performance in scientific information processing.

  20. NASA Hazard Analysis Process

    Science.gov (United States)

    Deckert, George

    2010-01-01

    This viewgraph presentation reviews The NASA Hazard Analysis process. The contents include: 1) Significant Incidents and Close Calls in Human Spaceflight; 2) Subsystem Safety Engineering Through the Project Life Cycle; 3) The Risk Informed Design Process; 4) Types of NASA Hazard Analysis; 5) Preliminary Hazard Analysis (PHA); 6) Hazard Analysis Process; 7) Identify Hazardous Conditions; 8) Consider All Interfaces; 9) Work a Preliminary Hazard List; 10) NASA Generic Hazards List; and 11) Final Thoughts

  1. Process Improvement Essentials

    CERN Document Server

    Persse, James R

    2006-01-01

    Process Improvement Essentials combines the foundation needed to understand process improvement theory with the best practices to help individuals implement process improvement initiatives in their organization. The three leading programs: ISO 9001:2000, CMMI, and Six Sigma--amidst the buzz and hype--tend to get lumped together under a common label. This book delivers a combined guide to all three programs, compares their applicability, and then sets the foundation for further exploration.

  2. Natural Language Processing

    OpenAIRE

    Preeti; BrahmaleenKaurSidhu

    2013-01-01

    Natural language processing (NLP) work began more than sixty years ago; it is a field of computer science and linguistics devoted to creating computer systems that use human (natural) language. Natural Language Processing holds great promise for making computer interfaces that are easier to use for people, since people will be able to talk to the computer in their own language, rather than learn a specialized language of computer commands. Natural Language processing techniques can make possi...

  3. Multiphoton processes: conference proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Lambropoulos, P.; Smith, S.J. (eds.)

    1984-01-01

    The chapters of this volume represent the invited papers delivered at the conference. They are arranged according to thermatic proximity beginning with atoms and continuing with molecules and surfaces. Section headings include multiphoton processes in atoms, field fluctuations and collisions in multiphoton process, and multiphoton processes in molecules and surfaces. Abstracts of individual items from the conference were prepared separately for the data base. (GHT)

  4. SIMULATION OF LOGISTICS PROCESSES

    OpenAIRE

    Yu. Taranenko; Fedorenko, I.

    2016-01-01

    The article deals with the theoretical basis of the simulation. The study shows the simulation of logistic processes in industrial countries is an integral part of many economic projects aimed at the creation or improvement of logistics systems. The paper was used model Beer Game for management of logistics processes in the enterprise. The simulation model implements in AnyLogic package. AnyLogic product allows us to consider the logistics processes as an integrated system, which allows reach...

  5. TEP process flow diagram

    Energy Technology Data Exchange (ETDEWEB)

    Wilms, R Scott [Los Alamos National Laboratory; Carlson, Bryan [Los Alamos National Laboratory; Coons, James [Los Alamos National Laboratory; Kubic, William [Los Alamos National Laboratory

    2008-01-01

    This presentation describes the development of the proposed Process Flow Diagram (PFD) for the Tokamak Exhaust Processing System (TEP) of ITER. A brief review of design efforts leading up to the PFD is followed by a description of the hydrogen-like, air-like, and waterlike processes. Two new design values are described; the mostcommon and most-demanding design values. The proposed PFD is shown to meet specifications under the most-common and mostdemanding design values.

  6. Jointly Poisson processes

    CERN Document Server

    Johnson, D H

    2009-01-01

    What constitutes jointly Poisson processes remains an unresolved issue. This report reviews the current state of the theory and indicates how the accepted but unproven model equals that resulting from the small time-interval limit of jointly Bernoulli processes. One intriguing consequence of these models is that jointly Poisson processes can only be positively correlated as measured by the correlation coefficient defined by cumulants of the probability generating functional.

  7. Standard Model processes

    CERN Document Server

    Mangano, M.L.; Aguilar Saavedra, J.A.; Alekhin, S.; Badger, S.; Bauer, C.W.; Becher, T.; Bertone, V.; Bonvini, M.; Boselli, S.; Bothmann, E.; Boughezal, R.; Cacciari, M.; Carloni Calame, C.M.; Caola, F.; Campbell, J.M.; Carrazza, S.; Chiesa, M.; Cieri, L.; Cimaglia, F.; Febres Cordero, F.; Ferrarese, P.; D'Enterria, D.; Ferrera, G.; Garcia i Tormo, X.; Garzelli, M.V.; Germann, E.; Hirschi, V.; Han, T.; Ita, H.; Jäger, B.; Kallweit, S.; Karlberg, A.; Kuttimalai, S.; Krauss, F.; Larkoski, A.J.; Lindert, J.; Luisoni, G.; Maierhöfer, P.; Mattelaer, O.; Martinez, H.; Moch, S.; Montagna, G.; Moretti, M.; Nason, P.; Nicrosini, O.; Oleari, C.; Pagani, D.; Papaefstathiou, A.; Petriello, F.; Piccinini, F.; Pierini, M.; Pierog, T.; Pozzorini, S.; Re, E.; Robens, T.; Rojo, J.; Ruiz, R.; Sakurai, K.; Salam, G.P.; Salfelder, L.; Schönherr, M.; Schulze, M.; Schumann, S.; Selvaggi, M.; Shivaji, A.; Siodmok, A.; Skands, P.; Torrielli, P.; Tramontano, F.; Tsinikos, I.; Tweedie, B.; Vicini, A.; Westhoff, S.; Zaro, M.; Zeppenfeld, D.; CERN. Geneva. ATS Department

    2017-06-22

    This report summarises the properties of Standard Model processes at the 100 TeV pp collider. We document the production rates and typical distributions for a number of benchmark Standard Model processes, and discuss new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.

  8. Business process transformation

    CERN Document Server

    Grover, Varun

    2015-01-01

    Featuring contributions from prominent thinkers and researchers, this volume in the ""Advances in Management Information Systems"" series provides a rich set of conceptual, empirical, and introspective studies that epitomize fundamental knowledge in the area of Business Process Transformation. Processes are interpreted broadly to include operational and managerial processes within and between organizations, as well as those involved in knowledge generation. Transformation includes radical and incremental change, its conduct, management, and outcome. The editors and contributing authors pay clo

  9. Multimodal Processes Rescheduling

    DEFF Research Database (Denmark)

    Bocewicz, Grzegorz; Banaszak, Zbigniew A.; Nielsen, Peter

    2013-01-01

    Cyclic scheduling problems concerning multimodal processes are usually observed in FMSs producing multi-type parts where the Automated Guided Vehicles System (AGVS) plays a role of a material handling system. Schedulability analysis of concurrently flowing cyclic processes (SCCP) exe-cuted in the......Cyclic scheduling problems concerning multimodal processes are usually observed in FMSs producing multi-type parts where the Automated Guided Vehicles System (AGVS) plays a role of a material handling system. Schedulability analysis of concurrently flowing cyclic processes (SCCP) exe...

  10. The Critical Design Process

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Knudstrup, Mary-Ann; Heiselberg, Per

    2014-01-01

    within Danish tradition of architecture and construction. The objective of the research presented in this paper, is to compare the different design processes behind the making of passive houses in a Danish context. We evaluated the process with regard to the integrated and traditional design process....... Data analysis showed that the majority of the consortiums worked in an integrated manner; though there was room for improvment. Additionally, the paper discusses the challanges of implementing the integrated design process in practice and suggests ways of overcomming some of the barriers . In doing so...

  11. Biased predecision processing.

    Science.gov (United States)

    Brownstein, Aaron L

    2003-07-01

    Decision makers conduct biased predecision processing when they restructure their mental representation of the decision environment to favor one alternative before making their choice. The question of whether biased predecision processing occurs has been controversial since L. Festinger (1957) maintained that it does not occur. The author reviews relevant research in sections on theories of cognitive dissonance, decision conflict, choice certainty, action control, action phases, dominance structuring, differentiation and consolidation, constructive processing, motivated reasoning, and groupthink. Some studies did not find evidence of biased predecision processing, but many did. In the Discussion section, the moderators are summarized and used to assess the theories.

  12. Fuels Processing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — NETL’s Fuels Processing Laboratory in Morgantown, WV, provides researchers with the equipment they need to thoroughly explore the catalytic issues associated with...

  13. Financial information processing

    Institute of Scientific and Technical Information of China (English)

    Shuo BAI; Shouyang WANG; Lean YU; Aoying ZHOU

    2009-01-01

    @@ The rapid growth in financial data volume has made financial information processing more and more difficult due to the increase in complexity, which has forced businesses and academics alike to turn to sophisticated information processing technologies for better solutions. A typical feature is that high-performance computers and advanced computational techniques play ever-increasingly important roles for business and industries to have competitive advantages. Accordingly, financial information processing has emerged as a new cross-disciplinary field integrating computer science, mathematics, financial economics, intelligent techniques, and computer simulations to make different decisions based on processed financial information.

  14. Cooperative internal conversion process

    CERN Document Server

    Kálmán, Péter

    2015-01-01

    A new phenomenon, called cooperative internal conversion process, in which the coupling of bound-free electron and neutron transitions due to the dipole term of their Coulomb interaction permits cooperation of two nuclei leading to neutron exchange if it is allowed by energy conservation, is discussed theoretically. General expression of the cross section of the process is reported in one particle nuclear and spherical shell models as well in the case of free atoms (e.g. noble gases). A half-life characteristic of the process is also determined. The case of $Ne$ is investigated numerically. The process may have significance in fields of nuclear waste disposal and nuclear energy production.

  15. Acoustic Signal Processing

    Science.gov (United States)

    Hartmann, William M.; Candy, James V.

    Signal processing refers to the acquisition, storage, display, and generation of signals - also to the extraction of information from signals and the re-encoding of information. As such, signal processing in some form is an essential element in the practice of all aspects of acoustics. Signal processing algorithms enable acousticians to separate signals from noise, to perform automatic speech recognition, or to compress information for more efficient storage or transmission. Signal processing concepts are the building blocks used to construct models of speech and hearing. Now, in the 21st century, all signal processing is effectively digital signal processing. Widespread access to high-speed processing, massive memory, and inexpensive software make signal processing procedures of enormous sophistication and power available to anyone who wants to use them. Because advanced signal processing is now accessible to everybody, there is a need for primers that introduce basic mathematical concepts that underlie the digital algorithms. The present handbook chapter is intended to serve such a purpose.

  16. Gas purification process

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, H.; Gresch, H.; Igelbuescher, H.; Dewert, H.

    1987-08-13

    To avoid the problems of reheating in a wet process as well as the problems of higher gas supply in a dry process, the invention proposes to separate the raw gas in two component currents, one of which undergoes wet purification while the other is led through a dry purification process. The two component currents are mixed before entering the stack. The dry chemisorption masses added in substoichiometric doses are treated in a milk-of-lime processing stage, after which the reacted and non-reacted chemisorption masses are treated by wet purification and then by oxidation.

  17. Living olefin polymerization processes

    Science.gov (United States)

    Schrock, Richard R.; Baumann, Robert

    1999-01-01

    Processes for the living polymerization of olefin monomers with terminal carbon-carbon double bonds are disclosed. The processes employ initiators that include a metal atom and a ligand having two group 15 atoms and a group 16 atom or three group 15 atoms. The ligand is bonded to the metal atom through two anionic or covalent bonds and a dative bond. The initiators are particularly stable under reaction conditions in the absence of olefin monomer. The processes provide polymers having low polydispersities, especially block copolymers having low polydispersities. It is an additional advantage of these processes that, during block copolymer synthesis, a relatively small amount of homopolymer is formed.

  18. Process modeling style

    CERN Document Server

    Long, John

    2014-01-01

    Process Modeling Style focuses on other aspects of process modeling beyond notation that are very important to practitioners. Many people who model processes focus on the specific notation used to create their drawings. While that is important, there are many other aspects to modeling, such as naming, creating identifiers, descriptions, interfaces, patterns, and creating useful process documentation. Experience author John Long focuses on those non-notational aspects of modeling, which practitioners will find invaluable. Gives solid advice for creating roles, work produ

  19. Chemical process hazards analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

  20. Characterization of oil shale, isolated kerogen, and post-pyrolysis residues using advanced 13 solid-state nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Cao, Xiaoyan; Birdwell, Justin E.; Chappell, Mark A.; Li, Yuan; Pignatello, Joseph J.; Mao, Jingdong

    2013-01-01

    Characterization of oil shale kerogen and organic residues remaining in postpyrolysis spent shale is critical to the understanding of the oil generation process and approaches to dealing with issues related to spent shale. The chemical structure of organic matter in raw oil shale and spent shale samples was examined in this study using advanced solid-state 13C nuclear magnetic resonance (NMR) spectroscopy. Oil shale was collected from Mahogany zone outcrops in the Piceance Basin. Five samples were analyzed: (1) raw oil shale, (2) isolated kerogen, (3) oil shale extracted with chloroform, (4) oil shale retorted in an open system at 500°C to mimic surface retorting, and (5) oil shale retorted in a closed system at 360°C to simulate in-situ retorting. The NMR methods applied included quantitative direct polarization with magic-angle spinning at 13 kHz, cross polarization with total sideband suppression, dipolar dephasing, CHn selection, 13C chemical shift anisotropy filtering, and 1H-13C long-range recoupled dipolar dephasing. The NMR results showed that, relative to the raw oil shale, (1) bitumen extraction and kerogen isolation by demineralization removed some oxygen-containing and alkyl moieties; (2) unpyrolyzed samples had low aromatic condensation; (3) oil shale pyrolysis removed aliphatic moieties, leaving behind residues enriched in aromatic carbon; and (4) oil shale retorted in an open system at 500°C contained larger aromatic clusters and more protonated aromatic moieties than oil shale retorted in a closed system at 360°C, which contained more total aromatic carbon with a wide range of cluster sizes.

  1. Electron-attachment processes

    Science.gov (United States)

    Christophorou, L. G.; McCorkle, D. L.; Christodoulides, A. A.

    Topics covered include: modes of production of negative ions, techniques for the study of electron attachment processes, dissociative electron attachment to ground state molecules, dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), molecular parent negative ions, and negative ions formed by ion pair processes and by collisions of molecules with ground state and Rydberg atoms.

  2. Of proteins and processing

    NARCIS (Netherlands)

    Salazar Villanea, Sergio

    2017-01-01

    Hydrothermal processing is a common practice during the manufacture of protein-rich feed ingredients, such as rapeseed meal (RSM), and feeds. This processing step can induce physical and chemical changes to the proteins, thereby reducing the digestibility and utilization of crude protein (CP) and

  3. Uranium processing and properties

    CERN Document Server

    2013-01-01

    Covers a broad spectrum of topics and applications that deal with uranium processing and the properties of uranium Offers extensive coverage of both new and established practices for dealing with uranium supplies in nuclear engineering Promotes the documentation of the state-of-the-art processing techniques utilized for uranium and other specialty metals

  4. WWTP Process Tank Modelling

    DEFF Research Database (Denmark)

    Laursen, Jesper

    hydrofoil shaped propellers. These two sub-processes deliver the main part of the supplied energy to the activated sludge tank, and for this reason they are important for the mixing conditions in the tank. For other important processes occurring in the activated sludge tank, existing models and measurements...

  5. The Analytical Hierarchy Process

    DEFF Research Database (Denmark)

    Barfod, Michael Bruhn

    2007-01-01

    The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use.......The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use....

  6. Continuous affine processes

    DEFF Research Database (Denmark)

    Buchardt, Kristian

    2016-01-01

    Affine processes possess the property that expectations of exponential affine transformations are given by a set of Riccati differential equations, which is the main feature of this popular class of processes. In this paper we generalise these results for expectations of more general transformati...

  7. Relational Processing Following Stroke

    Science.gov (United States)

    Andrews, Glenda; Halford, Graeme S.; Shum, David; Maujean, Annick; Chappell, Mark; Birney, Damian

    2013-01-01

    The research examined relational processing following stroke. Stroke patients (14 with frontal, 30 with non-frontal lesions) and 41 matched controls completed four relational processing tasks: sentence comprehension, Latin square matrix completion, modified Dimensional Change Card Sorting, and n-back. Each task included items at two or three…

  8. Flow generating processes

    NARCIS (Netherlands)

    Lanen, van H.A.J.; Fendeková, M.; Kupczyk, E.; Kasprzyk, A.; Pokojski, W.

    2004-01-01

    This chapter starts with an overview of how climatic water deficits affect hydrological processes in different type of catchments. It then continues with a more comprehensive description of drought relevant processes. Two catchments in climatologically contrasting regions are used for illustrative p

  9. The Analytical Hierarchy Process

    DEFF Research Database (Denmark)

    Barfod, Michael Bruhn

    2007-01-01

    The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use.......The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use....

  10. Basic Data Processing.

    Science.gov (United States)

    Scalice, John J.

    This study guide in data processing is designed to make the subject accessible to the secondary student. It contains the following units: Historical Developments, Understanding the Computer, Careers in Data Processing, The Tabulating Card, Keypunching, Interpreting, Sorting, The 514 Reproducer, The 85 Collator, and The 402 Accounting Machine. The…

  11. Food processing and allergenicity.

    Science.gov (United States)

    Verhoeckx, Kitty C M; Vissers, Yvonne M; Baumert, Joseph L; Faludi, Roland; Feys, Marcel; Flanagan, Simon; Herouet-Guicheney, Corinne; Holzhauser, Thomas; Shimojo, Ryo; van der Bolt, Nieke; Wichers, Harry; Kimber, Ian

    2015-06-01

    Food processing can have many beneficial effects. However, processing may also alter the allergenic properties of food proteins. A wide variety of processing methods is available and their use depends largely on the food to be processed. In this review the impact of processing (heat and non-heat treatment) on the allergenic potential of proteins, and on the antigenic (IgG-binding) and allergenic (IgE-binding) properties of proteins has been considered. A variety of allergenic foods (peanuts, tree nuts, cows' milk, hens' eggs, soy, wheat and mustard) have been reviewed. The overall conclusion drawn is that processing does not completely abolish the allergenic potential of allergens. Currently, only fermentation and hydrolysis may have potential to reduce allergenicity to such an extent that symptoms will not be elicited, while other methods might be promising but need more data. Literature on the effect of processing on allergenic potential and the ability to induce sensitisation is scarce. This is an important issue since processing may impact on the ability of proteins to cause the acquisition of allergic sensitisation, and the subject should be a focus of future research. Also, there remains a need to develop robust and integrated methods for the risk assessment of food allergenicity.

  12. Hyperspectral image processing methods

    Science.gov (United States)

    Hyperspectral image processing refers to the use of computer algorithms to extract, store and manipulate both spatial and spectral information contained in hyperspectral images across the visible and near-infrared portion of the electromagnetic spectrum. A typical hyperspectral image processing work...

  13. Kuhlthau's Information Search Process.

    Science.gov (United States)

    Shannon, Donna

    2002-01-01

    Explains Kuhlthau's Information Search Process (ISP) model which is based on a constructivist view of learning and provides a framework for school library media specialists for the design of information services and instruction. Highlights include a shift from library skills to information skills; attitudes; process approach; and an interview with…

  14. Cognitive Processes and Achievement.

    Science.gov (United States)

    Hunt, Dennis; Randhawa, Bikkar S.

    For a group of 165 fourth- and fifth-grade students, four achievement test scores were correlated with success on nine tests designed to measure three cognitive functions: sustained attention, successive processing, and simultaneous processing. This experiment was designed in accordance with Luria's model of the three functional units of the…

  15. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  16. Process Writing Checklist.

    Science.gov (United States)

    Jenks, Christopher J.

    This checklist is designed to help develop writing strategies for English language learners (ELLs), focusing on a variety of linguistic strategies inherent in the writing process. It provides them with a graphical representation of the cognitive process involved in complex writing, promoting self-assessment strategies and integrating oral…

  17. Technologies for Optical Processing

    DEFF Research Database (Denmark)

    Stubkjær, Kristian

    2008-01-01

    The article consists of a Powerpoint presentation on technologies for optical processing. The paper concludes that the nonlinear elements based on SOA, fibers and waveguide structures have capabilities of simple processing at data rates of 100-600 Gb/s. Switching powers comparable to electronics...

  18. Cognitive Processes and Achievement.

    Science.gov (United States)

    Hunt, Dennis; Randhawa, Bikkar S.

    For a group of 165 fourth- and fifth-grade students, four achievement test scores were correlated with success on nine tests designed to measure three cognitive functions: sustained attention, successive processing, and simultaneous processing. This experiment was designed in accordance with Luria's model of the three functional units of the…

  19. Process Writing with Hawthorne.

    Science.gov (United States)

    Edwards, Lita R.

    Teachers can use the process writing format for many assignments to teach and refine more skills than are often incorporated in older methods, and this is exemplified by a teaching unit comparing two short stories by Nathaniel Hawthorne. Peer conferences and peer editing in the revision stages, which are features of the process model, can lead to…

  20. Monitoring Business Processes

    Science.gov (United States)

    Bellandi, Valerio; Ceravolo, Paolo; Damiani, Ernesto; Frati, Fulvio

    In this chapter, we introduce the TEKNE Metrics Framework that performs services to monitor business processes. This framework was designed to support the prescription and explanation of these processes. TEKNE's most innovative contribution is managing data expressed in declarative form. To face this challenge, the TEKNE project implemented an infrastructure that relies on declarative Semantic Web technologies designed to be used in distributed systems.

  1. Image processing mini manual

    Science.gov (United States)

    Matthews, Christine G.; Posenau, Mary-Anne; Leonard, Desiree M.; Avis, Elizabeth L.; Debure, Kelly R.; Stacy, Kathryn; Vonofenheim, Bill

    1992-01-01

    The intent is to provide an introduction to the image processing capabilities available at the Langley Research Center (LaRC) Central Scientific Computing Complex (CSCC). Various image processing software components are described. Information is given concerning the use of these components in the Data Visualization and Animation Laboratory at LaRC.

  2. Hybrid quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo (Japan)

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  3. Heavy oils processing materials requirements crude processing

    Energy Technology Data Exchange (ETDEWEB)

    Sloley, Andrew W. [CH2M Hill, Englewood, CO (United States)

    2012-07-01

    Over time, recommended best practices for crude unit materials selection have evolved to accommodate new operating requirements, feed qualities, and product qualities. The shift to heavier oil processing is one of the major changes in crude feed quality occurring over the last 20 years. The three major types of crude unit corrosion include sulfidation attack, naphthenic acid attack, and corrosion resulting from hydrolyzable chlorides. Heavy oils processing makes all three areas worse. Heavy oils have higher sulfur content; higher naphthenic acid content; and are more difficult to desalt, leading to higher chloride corrosion rates. Materials selection involves two major criteria, meeting required safety standards, and optimizing economics of the overall plant. Proper materials selection is only one component of a plant integrity approach. Materials selection cannot eliminate all corrosion. Proper materials selection requires appropriate support from other elements of an integrity protection program. The elements of integrity preservation include: materials selection (type and corrosion allowance); management limits on operating conditions allowed; feed quality control; chemical additives for corrosion reduction; and preventive maintenance and inspection (PMI). The following discussion must be taken in the context of the application of required supporting work in all the other areas. Within that context, specific materials recommendations are made to minimize corrosion due to the most common causes in the crude unit. (author)

  4. Heavy oils processing materials requirements crude processing

    Energy Technology Data Exchange (ETDEWEB)

    Sloley, Andrew W. [CH2M Hill, Englewood, CO (United States)

    2012-07-01

    Over time, recommended best practices for crude unit materials selection have evolved to accommodate new operating requirements, feed qualities, and product qualities. The shift to heavier oil processing is one of the major changes in crude feed quality occurring over the last 20 years. The three major types of crude unit corrosion include sulfidation attack, naphthenic acid attack, and corrosion resulting from hydrolyzable chlorides. Heavy oils processing makes all three areas worse. Heavy oils have higher sulfur content; higher naphthenic acid content; and are more difficult to desalt, leading to higher chloride corrosion rates. Materials selection involves two major criteria, meeting required safety standards, and optimizing economics of the overall plant. Proper materials selection is only one component of a plant integrity approach. Materials selection cannot eliminate all corrosion. Proper materials selection requires appropriate support from other elements of an integrity protection program. The elements of integrity preservation include: materials selection (type and corrosion allowance); management limits on operating conditions allowed; feed quality control; chemical additives for corrosion reduction; and preventive maintenance and inspection (PMI). The following discussion must be taken in the context of the application of required supporting work in all the other areas. Within that context, specific materials recommendations are made to minimize corrosion due to the most common causes in the crude unit. (author)

  5. Formed HIP Can Processing

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Kester Diederik [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  6. Logistics Innovation Process Revisited

    DEFF Research Database (Denmark)

    Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

    2011-01-01

    innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...... into the process of a logistics innovation in an oriental healthcare supply chain context. The study is, however, still limited in disclosing end-to-end supply chain benefits including concrete performance improvements at the suppliers. Examining logistics innovation processes should result not only......Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...

  7. Posttranslational processing of progastrin

    DEFF Research Database (Denmark)

    Bundgaard, Jens René; Rehfeld, Jens F.

    2010-01-01

    Gastrin and cholecystokinin (CCK) are homologous hormones with important functions in the brain and the gut. Gastrin is the main regulator of gastric acid secretion and gastric mucosal growth, whereas cholecystokinin regulates gall bladder emptying, pancreatic enzyme secretion and besides acts...... processing progastrin is often greatly disturbed in neoplastic cells.The posttranslational phase of the biogenesis of gastrin and the various progastrin products in gastrin gene-expressing tissues is now reviewed here. In addition, the individual contributions of the processing enzymes are discussed......, as are structural features of progastrin that are involved in the precursor activation process. Thus, the review describes how the processing depends on the cell-specific expression of the processing enzymes and kinetics in the secretory pathway....

  8. New Processes for Annulation

    Institute of Scientific and Technical Information of China (English)

    Liu Hsing-Jang

    2004-01-01

    Making use of the high propensity of 2-cyano-2-cycloalkenones to undergo conjugate addition with various carbanions and the high reactivity of the ensuing α -cyano ketone system, a number of new annulation processes have been developed recently in our laboratories. As shown in Eq. 1 (n=1) with a specific example, one such process involves the addition of 3-butenylmagnesium bromide, followed by a palladium (Ⅱ) acetate mediated oxidative cyclization, to facilitate methylenecyclopentane ring formation. This annulation process could be readily extended to effect methylenecyclohexane ring formation (Eq. 1, n=2), using 4-pentenylmagnesinm bromide as the initial reagent, and to install the carbomethoxy-substituted methylenecyclopentane and methylenecyclohexane rings, using the carbanions derived from methyl 4-pentenoate and methyl 5-hexenoate, respectively (Eq. 2). In another annulation process, the addition of the enolate of methyl 5-chloropentanoate is involved initially, and the ring formation is readily effected by an intramolecular alkylation process. A specific example is given in Eq. 3.

  9. Business process support

    Energy Technology Data Exchange (ETDEWEB)

    Carle, Adriana; Fiducia, Daniel [Transportadora de Gas del Sur S.A. (TGS), Buenos Aires (Argentina)

    2005-07-01

    This paper is about the own development of business support software. The developed applications are used to support two business processes: one of them is the process of gas transportation and the other is the natural gas processing. This software has interphases with the ERP SAP, software SCADA and on line gas transportation simulation software. The main functionalities of the applications are: entrance on line real time of clients transport nominations, transport programming, allocation of the clients transport nominations, transport control, measurements, balanced pipeline, allocation of gas volume to the gas processing plants, calculate of product tons processed in each plant and tons of product distributed to clients. All the developed software generates information to the internal staff, regulatory authorities and clients. (author)

  10. Beryllium chemistry and processing

    CERN Document Server

    Walsh, Kenneth A

    2009-01-01

    This book introduces beryllium; its history, its chemical, mechanical, and physical properties including nuclear properties. The 29 chapters include the mineralogy of beryllium and the preferred global sources of ore bodies. The identification and specifics of the industrial metallurgical processes used to form oxide from the ore and then metal from the oxide are thoroughly described. The special features of beryllium chemistry are introduced, including analytical chemical practices. Beryllium compounds of industrial interest are identified and discussed. Alloying, casting, powder processing, forming, metal removal, joining and other manufacturing processes are covered. The effect of composition and process on the mechanical and physical properties of beryllium alloys assists the reader in material selection. The physical metallurgy chapter brings conformity between chemical and physical metallurgical processing of beryllium, metal, alloys, and compounds. The environmental degradation of beryllium and its all...

  11. Manufacturing processes 4 forming

    CERN Document Server

    Klocke, Fritz

    2013-01-01

    This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; ...

  12. Branching processes in biology

    CERN Document Server

    Kimmel, Marek

    2015-01-01

    This book provides a theoretical background of branching processes and discusses their biological applications. Branching processes are a well-developed and powerful set of tools in the field of applied probability. The range of applications considered includes molecular biology, cellular biology, human evolution and medicine. The branching processes discussed include Galton-Watson, Markov, Bellman-Harris, Multitype, and General Processes. As an aid to understanding specific examples, two introductory chapters, and two glossaries are included that provide background material in mathematics and in biology. The book will be of interest to scientists who work in quantitative modeling of biological systems, particularly probabilists, mathematical biologists, biostatisticians, cell biologists, molecular biologists, and bioinformaticians. The authors are a mathematician and cell biologist who have collaborated for more than a decade in the field of branching processes in biology for this new edition. This second ex...

  13. Nonhomogeneous fractional Poisson processes

    Energy Technology Data Exchange (ETDEWEB)

    Wang Xiaotian [School of Management, Tianjin University, Tianjin 300072 (China)]. E-mail: swa001@126.com; Zhang Shiying [School of Management, Tianjin University, Tianjin 300072 (China); Fan Shen [Computer and Information School, Zhejiang Wanli University, Ningbo 315100 (China)

    2007-01-15

    In this paper, we propose a class of non-Gaussian stationary increment processes, named nonhomogeneous fractional Poisson processes W{sub H}{sup (j)}(t), which permit the study of the effects of long-range dependance in a large number of fields including quantum physics and finance. The processes W{sub H}{sup (j)}(t) are self-similar in a wide sense, exhibit more fatter tail than Gaussian processes, and converge to the Gaussian processes in distribution in some cases. In addition, we also show that the intensity function {lambda}(t) strongly influences the existence of the highest finite moment of W{sub H}{sup (j)}(t) and the behaviour of the tail probability of W{sub H}{sup (j)}(t)

  14. Conceptualizing operations strategy processes

    DEFF Research Database (Denmark)

    Rytter, Niels Gorm; Boer, Harry; Koch, Christian

    2007-01-01

    Purpose - The purpose of this paper is to present insights into operations strategy (OS) in practice. It outlines a conceptualization and model of OS processes and, based on findings from an in-depth and longitudinal case study, contributes to further development of extant OS models and methods...... which presently mainly focus on OS content, as distinct from process issues. DesignImethodology/approach - The methodology combines action research and a longitudinal single site case study of OS processes in practice. Findings - The paper conceptualises an OS process as: events of dialogue and action...... provides a useful tool for describing and analyzing real-time OS processes unfolding in practice. Research limitations/implications - The research is based on a single case, which limits the generalizability of the findings. Practical implications - The findings suggest that, in order to obtain successful...

  15. Business Process Management

    Science.gov (United States)

    Mendling, Jan

    The recent progress of Business Process Management (BPM) is reflected by the figures of the related industry. Wintergreen Research estimates that the international market for BPM-related software and services accounted for more than USD 1 billion in 2005 with a tendency towards rapid growth in the subsequent couple of years [457]. The relevance of business process modeling to general management initiatives has been previously studied in the 1990s [28]. Today, Gartner finds that organizations that had the best results in implementing business process management spent more than 40 percent of the total project time on discovery and construction of their initial process model [265]. As a consequence, Gartner considers Business Process Modeling to be among the Top 10 Strategic Technologies for 2008.

  16. Customer Innovation Process Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

    2007-01-01

    Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... on different types of organisational setup to the product development model and process. The globalization and enhanced competitive markets are however changing the innovation game and the challenge to innovation leadership Excellent product development innovation and leadership seems not any longer to enough...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

  17. States in Process Calculi

    Directory of Open Access Journals (Sweden)

    Christoph Wagner

    2014-08-01

    Full Text Available Formal reasoning about distributed algorithms (like Consensus typically requires to analyze global states in a traditional state-based style. This is in contrast to the traditional action-based reasoning of process calculi. Nevertheless, we use domain-specific variants of the latter, as they are convenient modeling languages in which the local code of processes can be programmed explicitly, with the local state information usually managed via parameter lists of process constants. However, domain-specific process calculi are often equipped with (unlabeled reduction semantics, building upon a rich and convenient notion of structural congruence. Unfortunately, the price for this convenience is that the analysis is cumbersome: the set of reachable states is modulo structural congruence, and the processes' state information is very hard to identify. We extract from congruence classes of reachable states individual state-informative representatives that we supply with a proper formal semantics. As a result, we can now freely switch between the process calculus terms and their representatives, and we can use the stateful representatives to perform assertional reasoning on process calculus models.

  18. The Isasmelt process

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, K.R. (MIM Technology Marketing Ltd., Northfleet (United Kingdom))

    1993-01-01

    The Isasmelt process was developed at Mt Isa Mines Ltd. in Queensland. The process was initially developed for the treatment of lead concentrate. After successful application of the process to lead production a pilot plant was built for the treatment of copper concentrate to produce copper matte. This was successful and as a result Mt Isa Mines decided to build a new copper smelter with a capacity of 180,000 t copper/ a in copper matte. Further commercialisation of the process has resulted in the construction of further plants for lead, nickel and copper production. Mt Isa Mines Ltd. has been associated with CSIRO (Commonwealth Scientific Industrial Research Organisation) in the development of the Isasmelt process since 1977, when a Sirosmelt lance was tested for reducing copper converter slags. Thermodynamic modelling and cruicible scale investigations on a lead smelting process were initiated in 1978. After further work on a 120 kg/h pilot plant the Isasmelt process for lead concentrate smelting was patented jointly by Mt Isa Mines and CSIRO. Since then a 5 t/h demonstration plant was commissioned 1983/85 for smelting and reduction. Finally in 1991 a commercial scale plant with a capacity of 60,000 t/a was commissioned. (orig.).

  19. Revealing the programming process

    DEFF Research Database (Denmark)

    Bennedsen, Jens; Caspersen, Michael Edelgaard

    2005-01-01

    One of the most important goals of an introductory programming course is that the students learn a systematic approach to the development of computer programs. Revealing the programming process is an important part of this; however, textbooks do not address the issue -- probably because the textb......One of the most important goals of an introductory programming course is that the students learn a systematic approach to the development of computer programs. Revealing the programming process is an important part of this; however, textbooks do not address the issue -- probably because...... the textbook medium is static and therefore ill-suited to expose the process of programming. We have found that process recordings in the form of captured narrated programming sessions are a simple, cheap, and efficient way of providing the revelation.We identify seven different elements of the programming...... process for which process recordings are a valuable communication media in order to enhance the learning process. Student feedback indicates both high learning outcome and superior learning potential compared to traditional classroom teaching....

  20. Welding processes handbook

    CERN Document Server

    Weman, Klas

    2003-01-01

    Deals with the main commercially significant and commonly used welding processes. This title takes the student or novice welder through the individual steps involved in each process in an easily understood way. It covers many of the requirements referred to in European Standards including EN719, EN 729, EN 729 and EN 287.$bWelding processes handbook is a concise, explanatory guide to the main commercially significant and commonly-used welding processes. It takes the novice welder or student through the individual steps involved in each process in a clear and easily understood way. It is intended to provide an up-to-date reference to the major applications of welding as they are used in industry. The contents have been arranged so that it can be used as a textbook for European welding courses in accordance with guidelines from the European Welding Federation. Welding processes and equipment necessary for each process are described so that they can be applied to all instruction levels required by the EWF and th...

  1. Semi-Markov processes

    CERN Document Server

    Grabski

    2014-01-01

    Semi-Markov Processes: Applications in System Reliability and Maintenance is a modern view of discrete state space and continuous time semi-Markov processes and their applications in reliability and maintenance. The book explains how to construct semi-Markov models and discusses the different reliability parameters and characteristics that can be obtained from those models. The book is a useful resource for mathematicians, engineering practitioners, and PhD and MSc students who want to understand the basic concepts and results of semi-Markov process theory. Clearly defines the properties and

  2. Digital Differential Geometry Processing

    Institute of Scientific and Technical Information of China (English)

    Xin-Guo Liu; Hu-Jun Bao; Qun-Sheng Peng

    2006-01-01

    The theory and methods of digital geometry processing has been a hot research area in computer graphics, as geometric models serves as the core data for 3D graphics applications. The purpose of this paper is to introduce some recent advances in digital geometry processing, particularly mesh fairing, surface parameterization and mesh editing, that heavily use differential geometry quantities. Some related concepts from differential geometry, such as normal, curvature, gradient,Laplacian and their counterparts on digital geometry are also reviewed for understanding the strength and weakness of various digital geometry processing methods.

  3. Irreversible processes kinetic theory

    CERN Document Server

    Brush, Stephen G

    2013-01-01

    Kinetic Theory, Volume 2: Irreversible Processes deals with the kinetic theory of gases and the irreversible processes they undergo. It includes the two papers by James Clerk Maxwell and Ludwig Boltzmann in which the basic equations for transport processes in gases are formulated, together with the first derivation of Boltzmann's ""H-theorem"" and a discussion of this theorem, along with the problem of irreversibility.Comprised of 10 chapters, this volume begins with an introduction to the fundamental nature of heat and of gases, along with Boltzmann's work on the kinetic theory of gases and s

  4. Managing Software Process Evolution

    DEFF Research Database (Denmark)

    This book focuses on the design, development, management, governance and application of evolving software processes that are aligned with changing business objectives, such as expansion to new domains or shifting to global production. In the context of an evolving business world, it examines...... essential insights and tips to help readers manage process evolutions. And last but not least, it provides a wealth of examples and cases on how to deal with software evolution in practice. Reflecting these topics, the book is divided into three parts. Part 1 focuses on software business transformation...... the organization and management of (software development) projects and process improvements projects....

  5. Plasma processing for VLSI

    CERN Document Server

    Einspruch, Norman G

    1984-01-01

    VLSI Electronics: Microstructure Science, Volume 8: Plasma Processing for VLSI (Very Large Scale Integration) discusses the utilization of plasmas for general semiconductor processing. It also includes expositions on advanced deposition of materials for metallization, lithographic methods that use plasmas as exposure sources and for multiple resist patterning, and device structures made possible by anisotropic etching.This volume is divided into four sections. It begins with the history of plasma processing, a discussion of some of the early developments and trends for VLSI. The second section

  6. Chemical Processing Manual

    Science.gov (United States)

    Beyerle, F. J.

    1972-01-01

    Chemical processes presented in this document include cleaning, pickling, surface finishes, chemical milling, plating, dry film lubricants, and polishing. All types of chemical processes applicable to aluminum, for example, are to be found in the aluminum alloy section. There is a separate section for each category of metallic alloy plus a section for non-metals, such as plastics. The refractories, super-alloys and titanium, are prime candidates for the space shuttle, therefore, the chemical processes applicable to these alloys are contained in individual sections of this manual.

  7. Nano integrated circuit process

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yung Sup

    2004-02-15

    This book contains nine chapters, which are introduction of manufacture of semiconductor chip, oxidation such as Dry-oxidation, wet oxidation, oxidation model and oxide film, diffusion like diffusion process, diffusion equation, diffusion coefficient and diffusion system, ion implantation, including ion distribution, channeling, multiimplantation and masking and its system, sputtering such as CVD and PVD, lithography, wet etch and dry etch, interconnection and flattening like metal-silicon connection, silicide, multiple layer metal process and flattening, an integrated circuit process, including MOSFET and CMOS.

  8. Staging Collaborative Innovation Processes

    DEFF Research Database (Denmark)

    Pedersen, Signe; Clausen, Christian

    Organisations are currently challenged by demands for increased collaborative innovation internally as well as with external and new entities - e.g. across the value chain. The authors seek to develop new approaches to managing collaborative innovative processes in the context of open innovation...... and public private innovation partnerships. Based on a case study of a collaborative design process in a large electronics company the paper points to the key importance of staging and navigation of collaborative innovation process. Staging and navigation is presented as a combined activity: 1) to translate...

  9. The image processing handbook

    CERN Document Server

    Russ, John C

    2006-01-01

    Now in its fifth edition, John C. Russ's monumental image processing reference is an even more complete, modern, and hands-on tool than ever before. The Image Processing Handbook, Fifth Edition is fully updated and expanded to reflect the latest developments in the field. Written by an expert with unequalled experience and authority, it offers clear guidance on how to create, select, and use the most appropriate algorithms for a specific application. What's new in the Fifth Edition? ·       A new chapter on the human visual process that explains which visual cues elicit a response from the vie

  10. Study on Glulam Process

    Institute of Scientific and Technical Information of China (English)

    PENG Limin; WANG Haiqing; HE Weili

    2006-01-01

    This paper selected lumbers of Manchurian ash (Fraxinus rnandshurica), Manchurian walnut (Juglans mandshuricd) and Spruce (Picea jezoensis vai.kornamvii) for manufacturing glulam with water-borne polymeric-isocyanate adhesive to determine process variables. The process variables that include specific pressure, pressing time and adhesive application amount influencing the shear strength of the glulam, were investigated through the orthogonal test. The results indicated that optimum process variables for glulam manufacturing were as follows: Specific pressure of 1.5 MPa for Spruce and 2,0 MPa both for Manchurian ash and Manchurian walnut, pressing time of 60 min and adhesive application amount of 250 g/m2.

  11. Getting Started with Processing

    CERN Document Server

    Reas, Casey

    2010-01-01

    Learn computer programming the easy way with Processing, a simple language that lets you use code to create drawings, animation, and interactive graphics. Programming courses usually start with theory, but this book lets you jump right into creative and fun projects. It's ideal for anyone who wants to learn basic programming, and serves as a simple introduction to graphics for people with some programming skills. Written by the founders of Processing, this book takes you through the learning process one step at a time to help you grasp core programming concepts. You'll learn how to sketch wi

  12. Dissolution processes. [224 references

    Energy Technology Data Exchange (ETDEWEB)

    Silver, G.L.

    1976-10-22

    This review contains more than 100 observations and 224 references on the dissolution phenomenon. The dissolution processes are grouped into three categories: methods of aqueous attack, fusion methods, and miscellaneous observations on phenomena related to dissolution problems. (DLC)

  13. TERMINOLOGY IN PROCESS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Igor G. Fedorov

    2013-01-01

    Full Text Available We can be mistaken to formulate basic concepts of process management, and we are at risk to be on the wrong way solving the focused problems – instead of process management we could do automatization, instead of process system we could introduce function-oriented system. Without having a clear idea of the model we have to execute, we can plan this model as an analytical one and do not include all the necessary tools for management on the stage of planning. The article is targeted for the analysts who have skills in analytical modeling of business processes and would like to make a step forward to the implementation of these models. In order to become professionals in this field it is necessary to learn the terminology, first of all. 

  14. Cooperative processing data bases

    Science.gov (United States)

    Hasta, Juzar

    1991-01-01

    Cooperative processing for the 1990's using client-server technology is addressed. The main theme is concepts of downsizing from mainframes and minicomputers to workstations on a local area network (LAN). This document is presented in view graph form.

  15. IT Project Prioritization Process

    DEFF Research Database (Denmark)

    Shollo, Arisa; Constantiou, Ioanna

    2013-01-01

    In most of the large companies IT project prioritization process is designed based on principles of evidencebased management. We investigate a case of IT project prioritization in a financial institution, and in particular, how managers practice evidence-based management during this process. We use...... a rich dataset built from a longitudinal study of the prioritization process for the IT projects. Our findings indicate that managers reach a decision not only by using evidence but from the interplay between the evidence and the judgment devices that managers employ. The interplay between evidence...... and judgment devices is manifested in three ways: supplementing, substituting, and interpreting evidence. We show that while evidence does not fully determine the decision, it plays a central role in discussions, reflections, and negotiations during the IT prioritization process....

  16. Assessing Process and Product

    DEFF Research Database (Denmark)

    Bennedsen, Jens; Caspersen, Michael E.

    2006-01-01

    The final assessment of a course must reflect its goals, and contents. An important goal of our introductory programming course is that the students learn a systematic approach for the development of computer programs. Having the programming process as learning objective naturally raises the ques......The final assessment of a course must reflect its goals, and contents. An important goal of our introductory programming course is that the students learn a systematic approach for the development of computer programs. Having the programming process as learning objective naturally raises...... the question how to include this in assessments. Traditional assessments (e.g. oral, written, or multiple choice) are unsuitable to test the programming process. We describe and evaluate a practical lab examination that assesses the students' programming process as well as the developed programs...

  17. Improving Healthcare Logistics Processes

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes

    provision whilst providing high quality care. Logistics activities in hospitals provide a significant opportunity for cost containment in healthcare through the implementation of best practices. Literature provides little guidance on how to improve healthcare logistics processes. This study investigates......Healthcare costs are increasing due to an ageing population and more sophisticated technologies and treatments. At the same time, patients expect high quality care at an affordable cost. The healthcare industry has therefore experienced increasing pressures to reduce the cost of healthcare...... logistics processes in hospitals and aims to provide theoretically and empirically based evidence for improving these processes to both expand the knowledge base of healthcare logistics and provide a decision tool for hospital logistics managers to improve their processes. Case studies were conducted...

  18. Processed Products Database System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...

  19. Business Model Process Configurations

    DEFF Research Database (Denmark)

    Taran, Yariv; Nielsen, Christian; Thomsen, Peter

    2015-01-01

    Purpose – The paper aims: 1) To develop systematically a structural list of various business model process configuration and to group (deductively) these selected configurations in a structured typological categorization list. 2) To facilitate companies in the process of BM innovation......, by developing (inductively) an ontological classification framework, in view of the BM process configurations typology developed. Design/methodology/approach – Given the inconsistencies found in the business model studies (e.g. definitions, configurations, classifications) we adopted the analytical induction...... method of data analysis. Findings - A comprehensive literature review and analysis resulted in a list of business model process configurations systematically organized under five classification groups, namely, revenue model; value proposition; value configuration; target customers, and strategic...

  20. Phenol removal pretreatment process

    Science.gov (United States)

    Hames, Bonnie R.

    2004-04-13

    A process for removing phenols from an aqueous solution is provided, which comprises the steps of contacting a mixture comprising the solution and a metal oxide, forming a phenol metal oxide complex, and removing the complex from the mixture.

  1. SIMULATION OF LOGISTICS PROCESSES

    Directory of Open Access Journals (Sweden)

    Yu. Taranenko

    2016-08-01

    Full Text Available The article deals with the theoretical basis of the simulation. The study shows the simulation of logistic processes in industrial countries is an integral part of many economic projects aimed at the creation or improvement of logistics systems. The paper was used model Beer Game for management of logistics processes in the enterprise. The simulation model implements in AnyLogic package. AnyLogic product allows us to consider the logistics processes as an integrated system, which allows reaching better solutions. Logistics process management involves pooling the sales market, production and distribution to ensure the temporal level of customer service at the lowest cost overall. This made it possible to conduct experiments and to determine the optimal size of the warehouse at the lowest cost.

  2. Radiation processing in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Makuuchi, Keizo [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2001-03-01

    Economic scale of radiation application in the field of industry, agriculture and medicine in Japan in 1997 was investigated to compare its economic impacts with that of nuclear energy industry. Total production value of radiation application accounted for 54% of nuclear industry including nuclear energy industry and radiation applications in three fields above. Industrial radiation applications were further divided into five groups, namely nondestructive test, RI instruments, radiation facilities, radiation processing and ion beam processing. More than 70% of the total production value was brought about by ion beam processing for use with IC and semiconductors. Future economic prospect of radiation processing of polymers, for example cross-linking, EB curing, graft polymerization and degradation, is reviewed. Particular attention was paid to radiation vulcanization of natural rubber latex and also to degradation of natural polymers. (S. Ohno)

  3. Ultrahigh bandwidth signal processing

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo

    2016-01-01

    Optical time lenses have proven to be very versatile for advanced optical signal processing. Based on a controlled interplay between dispersion and phase-modulation by e.g. four-wave mixing, the processing is phase-preserving, an hence useful for all types of data signals including coherent multi......-level modulation founats. This has enabled processing of phase-modulated spectrally efficient data signals, such as orthogonal frequency division multiplexed (OFDM) signa In that case, a spectral telescope system was used, using two time lenses with different focal lengths (chirp rates), yielding a spectral...... regeneratio These operations require a broad bandwidth nonlinear platform, and novel photonic integrated nonlinear platform like aluminum gallium arsenide nano-waveguides used for 1.28 Tbaud optical signal processing will be described....

  4. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models....... These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

  5. Towards processable Afrikaans

    CSIR Research Space (South Africa)

    Pretorius, L

    2009-06-01

    Full Text Available In this paper researchers discuss a number of structural problems that are faced with when designing a machine-oriented controlled natural language for Afrikaans taking the underlying principles of Attempto Controlled English (ACE) and Processable...

  6. Essentials of stochastic processes

    CERN Document Server

    Durrett, Richard

    2016-01-01

    Building upon the previous editions, this textbook is a first course in stochastic processes taken by undergraduate and graduate students (MS and PhD students from math, statistics, economics, computer science, engineering, and finance departments) who have had a course in probability theory. It covers Markov chains in discrete and continuous time, Poisson processes, renewal processes, martingales, and option pricing. One can only learn a subject by seeing it in action, so there are a large number of examples and more than 300 carefully chosen exercises to deepen the reader’s understanding. Drawing from teaching experience and student feedback, there are many new examples and problems with solutions that use TI-83 to eliminate the tedious details of solving linear equations by hand, and the collection of exercises is much improved, with many more biological examples. Originally included in previous editions, material too advanced for this first course in stochastic processes has been eliminated while treatm...

  7. Nonferrous Metal Processing Plants

    Data.gov (United States)

    Department of Homeland Security — This map layer includes nonferrous metal processing plants in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  8. Ultrasonic Processing of Materials

    Science.gov (United States)

    Han, Qingyou

    2015-08-01

    Irradiation of high-energy ultrasonic vibration in metals and alloys generates oscillating strain and stress fields in solids, and introduces nonlinear effects such as cavitation, acoustic streaming, and radiation pressure in molten materials. These nonlinear effects can be utilized to assist conventional material processing processes. This article describes recent research at Oak Ridge National Labs and Purdue University on using high-intensity ultrasonic vibrations for degassing molten aluminum, processing particulate-reinforced metal matrix composites, refining metals and alloys during solidification process and welding, and producing bulk nanostructures in solid metals and alloys. Research results suggest that high-intensity ultrasonic vibration is capable of degassing and dispersing small particles in molten alloys, reducing grain size during alloy solidification, and inducing nanostructures in solid metals.

  9. Quantum processes in semiconductors

    CERN Document Server

    Ridley, B K

    2013-01-01

    Aimed at graduate students, this is a guide to quantum processes of importance in the physics and technology of semiconductors. The fifth edition includes new chapters that expand the coverage of semiconductor physics relevant to its accompanying technology.

  10. Acoustic MIMO signal processing

    CERN Document Server

    Huang, Yiteng; Chen, Jingdong

    2006-01-01

    A timely and important book addressing a variety of acoustic signal processing problems under multiple-input multiple-output (MIMO) scenarios. It uniquely investigates these problems within a unified framework offering a novel and penetrating analysis.

  11. Reconfigurable network processing platforms

    NARCIS (Netherlands)

    Kachris, C.

    2007-01-01

    This dissertation presents our investigation on how to efficiently exploit reconfigurable hardware to design flexible, high performance, and power efficient network devices capable to adapt to varying processing requirements of network applications and traffic. The proposed reconfigurable network pr

  12. Processer i undervisningen

    DEFF Research Database (Denmark)

    Bundsgaard, Jeppe

    Undersøgelsen har fokus på processer i undervisningen – og derigennem på hvordan digitale læremidler kan understøtte eller integreres i typiske processer. Undersøgelsen hviler på deltagende observation på Abildgårdskolen i Odense. Gennem observationerne er der identificeret en række eksempler på ...... udfordringer for at gennemføre de undervisningsmæssige processer og givet bud på digitale læremidler der forventes at kunne understøtte processerne. Undersøgelsen viser samtidig hvordan fokus på processer kan fungere som en metode til brugerdreven innovation....

  13. CAPSULE REPORT: EVAPORATION PROCESS

    Science.gov (United States)

    Evaporation has been an established technology in the metal finishing industry for many years. In this process, wastewaters containing reusable materials, such as copper, nickel, or chromium compounds are heated, producing a water vapor that is continuously removed and condensed....

  14. Ferrous Metal Processing Plants

    Data.gov (United States)

    Department of Homeland Security — This map layer includes ferrous metal processing plants in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  15. Markovian risk process

    Institute of Scientific and Technical Information of China (English)

    WANG Han-xing; YAN Yun-zhi; ZHAO Fei; FANG Da-fan

    2007-01-01

    A Markovian risk process is considered in this paper, which is the generalization of the classical risk model. It is proper that a risk process with large claims is modelled as the Markovian risk model. In such a model, the occurrence of claims is described by a point process {N(t)}t≥o with N(t) being the number of jumps during the interval (0, t] for a Markov jump process. The ruin probability Ψ(u) of a company facing such a risk model is mainly studied. An integral equation satisfied by the ruin probability function Ψ(u) is obtained and the bounds for the convergence rate of the ruin probability Ψ(u) are given by using a generalized renewal technique developed in the paper.

  16. Biomedical signal processing

    CERN Document Server

    Akay, Metin

    1994-01-01

    Sophisticated techniques for signal processing are now available to the biomedical specialist! Written in an easy-to-read, straightforward style, Biomedical Signal Processing presents techniques to eliminate background noise, enhance signal detection, and analyze computer data, making results easy to comprehend and apply. In addition to examining techniques for electrical signal analysis, filtering, and transforms, the author supplies an extensive appendix with several computer programs that demonstrate techniques presented in the text.

  17. Metoda Analytic Network Process

    OpenAIRE

    2010-01-01

    The thesis is concerned with Multi-Criteria Decision Making, in particular the Analytic Network Process method. The introductory part is dedicated to compile all the theory necessary to understand the method and utilized throughout the paper. The Analytic Hierarchy Process method is described and later generalized in the form of the ANP. Part of the paper is a description of available software products that are able to solve the ANP models. The main focus is on the application of the method, ...

  18. Fractional Pure Birth Processes

    CERN Document Server

    Orsingher, Enzo; 10.3150/09-BEJ235

    2010-01-01

    We consider a fractional version of the classical non-linear birth process of which the Yule-Furry model is a particular case. Fractionality is obtained by replacing the first-order time derivative in the difference-differential equations which govern the probability law of the process, with the Dzherbashyan-Caputo fractional derivative. We derive the probability distribution of the number $ \\mathcal{N}_\

  19. Scramjet Combustion Processes

    Science.gov (United States)

    2010-09-01

    plan for these flights is as follows: Scramjet Combustion Processes RTO-EN-AVT-185 11 - 21 HyShot 5 – A Free-Flying Hypersonic Glider HyShot...5 will be a hypersonic glider designed to fly at Mach 8. It will separate from its rocket booster in space and perform controlled manoeuvres as it...RTO-EN-AVT-185 11 - 1 Scramjet Combustion Processes Michael Smart and Ray Stalker Centre for Hypersonics The University of Queensland

  20. Planetary atmosphere processes

    Energy Technology Data Exchange (ETDEWEB)

    Sidorenkov, N.S.

    1991-01-01

    The papers presented in this volume focus on various atmospheric processes, including zonal circulation of the atmosphere, the quasi-biennial cycle, blocking processes, monsoon circulation, and the response of the atmosphere to solar corpuscular fluxes. Other topics discussed include climatic characteristics of atmospheric circulation in the Northern and Southern Hemispheres, seasonal changes of the geopotential in the tropical stratosphere, and characteristics of the Southern Oscillation-El Nino phenomenon.

  1. Solution Processing - Rodlike Polymers

    Science.gov (United States)

    1979-08-01

    side it necessary and identify by block number) Para-ordered Polymers High Modulus Fibers and Films Polybenzobisoxazoles Polybenzobisthiazoles 20...considerations important in solution processing are considered, with special emphasis on the dry-jet wet spinning process used to form fibers . Pertinent...Company, Summit, N.J. iii TABLE OF CONTENTS 1. INTRODUCTION ................ .......................... .. 1 2. REMARKS ON DRY-JET WET SPUN FIBER

  2. Process for compound transformation

    KAUST Repository

    Basset, Jean-Marie

    2016-12-29

    Embodiments of the present disclosure provide for methods of using a catalytic system to chemically transform a compound (e.g., a hydrocarbon). In an embodiment, the method does not employ grafting the catalyst prior to catalysis. In particular, embodiments of the present disclosure provide for a process of hydrocarbon (e.g., C1 to C20 hydrocarbon) metathesis (e.g., alkane, olefin, or alkyne metathesis) transformation, where the process can be conducted without employing grafting prior to catalysis.

  3. Digital signal processing: Handbook

    Science.gov (United States)

    Goldenberg, L. M.; Matiushkin, B. D.; Poliak, M. N.

    The fundamentals of the theory and design of systems and devices for the digital processing of signals are presented. Particular attention is given to algorithmic methods of synthesis and digital processing equipment in communication systems (e.g., selective digital filtering, spectral analysis, and variation of the signal discretization frequency). Programs for the computer-aided analysis of digital filters are described. Computational examples are presented, along with tables of transfer function coefficients for recursive and nonrecursive digital filters.

  4. Harmonizable Processes: Structure.

    Science.gov (United States)

    1980-11-05

    a related result of Thomas ([39], p. 146). However, the Bourbaki set up of these papers is inconvenient here, and they will be converted to the set ...of processes. 1 2 2i 1. Introduction. Recently there have been significant attempts for extending the well-understood theory of stationary processes...characterizations of the respective classes. This involves a free use of some elementary aspects of vector measure theory ; and it already raises some interesting

  5. Diasporic Relationships and Processes

    DEFF Research Database (Denmark)

    Singla, Rashmi

    2010-01-01

    How does moving across the geographical borders affect the relationships of diaspora members both here – in the country of residence and there- in the country of origin? The article delineates some of the processes through gendered experiences of the young adults perceived as active actors based...... an empirical longitudinal study. The results indicate transformations in belongings and longings indicating reinterpretation of the self, others and home in context of exclusion processes at various levels....

  6. Cognitive Processes in Writing

    Institute of Scientific and Technical Information of China (English)

    李莹

    2009-01-01

    Writing has become one of important topic to discuss in the new age.Its theories could be generally learnt,but its nature needs to handle in specific contents.In another words,every one who can write must generate his/her thinking or cognitive processes.Because writing thinking is to do meaningful activities,how to solove writing problems could be managed through cognitive process.

  7. Cauchy cluster process

    DEFF Research Database (Denmark)

    Ghorbani, Mohammad

    2013-01-01

    In this paper we introduce an instance of the well-know Neyman–Scott cluster process model with clusters having a long tail behaviour. In our model the offspring points are distributed around the parent points according to a circular Cauchy distribution. Using a modified Cramér-von Misses test st...... statistic and the simulated pointwise envelopes it is shown that this model fits better than the Thomas process to the frequently analyzed long-leaf pine data-set....

  8. Typical Logistical Processes

    Directory of Open Access Journals (Sweden)

    Igor Trupac

    2012-10-01

    Full Text Available For modern global economic activity changes in the structureof goods, networks, technical and technological developmentand increased competence are significant, which requiresnew solutions and new mode of thinking.The competitive model which relied in the past on productinnovation will have to be largely supplemented by process innovationthat add greater value for customers. The basis forcompeting today and in the future will be competitive advantagewhich enhances product excellence as well as process excellence.

  9. Bank Record Processing

    Science.gov (United States)

    1982-01-01

    Barnett Banks of Florida, Inc. operates 150 banking offices in 80 Florida cities. Banking offices have computerized systems for processing deposits or withdrawals in checking/savings accounts, and for handling commercial and installment loan transactions. In developing a network engineering design for the terminals used in record processing, an affiliate, Barnett Computing Company, used COSMIC's STATCOM program. This program provided a reliable network design tool and avoided the cost of developing new software.

  10. Laser Processed Heat Exchangers

    Science.gov (United States)

    Hansen, Scott

    2017-01-01

    The Laser Processed Heat Exchanger project will investigate the use of laser processed surfaces to reduce mass and volume in liquid/liquid heat exchangers as well as the replacement of the harmful and problematic coatings of the Condensing Heat Exchangers (CHX). For this project, two scale unit test articles will be designed, manufactured, and tested. These two units are a high efficiency liquid/liquid HX and a high reliability CHX.

  11. Poststroke neuroplasticity processes

    Directory of Open Access Journals (Sweden)

    I. V. Damulin

    2014-01-01

    Full Text Available The paper considers different aspects of neuroplasticity in patients with stroke. It underlines the dynamism of this process and the ambiguity of involvement of the structures of the contralateral cerebral hemisphere in the restorative process. It considers the periods after onset of stroke and the activation of different brain regions (of both the involved and intact hemisphere in the poststroke period. Particular emphasis is placed on the issues of neurorehabilitation in this category of patients. Delay in rehabilitation measures leads to a worse outcome, the patients must be at hospital longer. It is emphasized that the neurorehabilitaton measures should use strategies aimed at improving plasticity processes at the level of synaptic transmission and neuronal communications. At the same time, of great importance are the processes of structural and functional remodeling of neuronal communications with the involvement of surviving neurons that are located in the peri-infarct area and partially damaged during ischemia. To recover stroke-induced lost motor functions, measures are implemented to modulate the ipsilateral motor cortex, contralateral motor cortex, and sensory afferentation. Remodeling processes, one of the manifestations of neuroplasticity, vary with the size and location of an ischemic focus. The specific features of this process with subcortical and cortical foci are considered. It is stressed that there are genetically determined neurotrophic factors that may enhance remodeling processes in the peri-infarct area, as well as factors that inhibit these processes. The sensory system is noted to have a high potential of compensation, which is appreciably associated with the considerable extent of sensory fibers even at the level of the cerebral cortex.

  12. Image Processing Software

    Science.gov (United States)

    1992-01-01

    To convert raw data into environmental products, the National Weather Service and other organizations use the Global 9000 image processing system marketed by Global Imaging, Inc. The company's GAE software package is an enhanced version of the TAE, developed by Goddard Space Flight Center to support remote sensing and image processing applications. The system can be operated in three modes and is combined with HP Apollo workstation hardware.

  13. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    The Integrated Renovation Process (IRP) is a user customized methodology based on judiciously selected constructivist and interactive multi-criteria decision making methods (Galiotto, Heiselberg, & Knudstrup, 2014 (expected)). When applied for home renovation, the Integrated Renovation Process...... for the quantitative analyses and the generation of the renovation scenarios so they get more time for the cost optimisation and the qualitative analysis of the homeowners’ needs, wishes and behaviours....

  14. Privatisation Process in Kosovo

    Directory of Open Access Journals (Sweden)

    Dr.Sc. Hysni Terziu

    2015-06-01

    Full Text Available This paper aims at analysing activities of the privatisation process in Kosovo, seeing that privatisation is treated as a fundamental factor of overall transformation of the whole society. It may be established that the primary aim of privatisation process is increasing economic efficiency, reflection of the current state and directions of development in general. Privatisation as a process has as primary aim of opening new areas of freedom, economic efficiency and individualism. Key aim of privatisation process in Kosovo must be increase of economic efficiency, preservation of the healthy economic potential created up to date, and ensuring of the long term concept, which enables growth and macroeconomic stability. The policy of privatisation should give a response related to strategic aspects of privatisation of these sectors: of models, procedures, potential investors, technological modernisation and overtaking of social barriers. Process of privatisation and transition which has now covered countries of the Eastern and Central Europe, aims at profound economic and political transformation of these countries. To achieve this, it is necessarily required to have some basic preconditions, which are related to incitement of general efficiency of the enterprises, expansion of the capital market, introduction of competition, development of business culture in private property and freedom of entrepreneurship. Impacts of privatisation in economic development of Kosovo take a considerable place compared to other countries, therefore our aim is that through this paper we analyse factors and methods of implementation in this process.

  15. Helium process cycle

    Science.gov (United States)

    Ganni, Venkatarao

    2007-10-09

    A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

  16. PALSAR ground data processing

    Science.gov (United States)

    Frick, Heinrich; Palsetia, Marzban; Carande, Richard; Curlander, James C.

    2002-02-01

    The upcoming launches of new satellites like ALOS, Envisat, Radarsat2 and ECHO will pose a significant challenge for many ground stations, namely to integrate new SAR processing software into their existing systems. Vexcel Corporation in Boulder, Colorado, has built a SAR processing system, named APEX -Suite, for spaceborne SAR satellites that can easily be expanded for the next generation of SAR satellites. APEX-Suite includes an auto-satellite-detecting Level 0 Processor that includes bit-error correction, data quality characterization, and as a unique feature, a sophisticated and very accurate Doppler centroid estimator. The Level 1 processing is divided into the strip mode processor FOCUST, based on the well-proven range-Doppler algorithm, and the SWATHT ScanSAR processor that uses the Chirp Z Trans-form algorithm. A high-accuracy ortho-rectification processor produces systematic and precision corrected Level 2 SAR image pro ducts. The PALSAR instrument is an L-band SAR with multiple fine and standard resolution beams in strip mode, and several wide-swath ScanSAR modes. We will address the adaptation process of Vexcel's APEX-Suite processing system for the PALSAR sensor and discuss image quality characteristics based on processed simulated point target phase history data.

  17. Environmental assessment: Geokinetics, Inc. oil shale research project, Uintah County, Utah

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Geokinetics, Inc. (GKI) proposes to complete the remaining experimental program to develop the LOFRECO modified horizontal in situ oil shale retorting process. This Environmental Assessment Report addresses the impacts of the project, located in a remote area of east-central Utah, about 70 miles south of both Vernal and Roosevelt.

  18. 9 CFR 318.300 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY... CERTIFICATION ENTRY INTO OFFICIAL ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS Canning and Canned... emitted from the retort throughout the entire thermal process. (d) Canned product. A meat food...

  19. Novel food processing techniques

    Directory of Open Access Journals (Sweden)

    Vesna Lelas

    2006-12-01

    Full Text Available Recently, a lot of investigations have been focused on development of the novel mild food processing techniques with the aim to obtain the high quality food products. It is presumed also that they could substitute some of the traditional processes in the food industry. The investigations are primarily directed to usage of high hydrostatic pressure, ultrasound, tribomechanical micronization, microwaves, pulsed electrical fields. The results of the scientific researches refer to the fact that application of some of these processes in particular food industry can result in lots of benefits. A significant energy savings, shortening of process duration, mild thermal conditions, food products with better sensory characteristics and with higher nutritional values can be achieved. As some of these techniques act also on the molecular level changing the conformation, structure and electrical potential of organic as well as inorganic materials, the improvement of some functional properties of these components may occur. Common characteristics of all of these techniques are treatment at ambient or insignificant higher temperatures and short time of processing (1 to 10 minutes. High hydrostatic pressure applied to various foodstuffs can destroy some microorganisms, successfully modify molecule conformation and consequently improve functional properties of foods. At the same time it acts positively on the food products intend for freezing. Tribomechanical treatment causes micronization of various solid materials that results in nanoparticles and changes in structure and electrical potential of molecules. Therefore, the significant improvement of some rheological and functional properties of materials occurred. Ultrasound treatment proved to be potentially very successful technique of food processing. It can be used as a pretreatment to drying (decreases drying time and improves functional properties of food, as extraction process of various components

  20. Carbon dioxide reducing processes; Koldioxidreducerande processer

    Energy Technology Data Exchange (ETDEWEB)

    Svensson, Fredrik

    1999-12-01

    This thesis discusses different technologies to reduce or eliminate the carbon dioxide emissions, when a fossil fuel is used for energy production. Emission reduction can be accomplished by separating the carbon dioxide for storage or reuse. There are three different ways of doing the separation. The carbon dioxide can be separated before the combustion, the process can be designed so that the carbon dioxide can be separated without any energy consumption and costly systems or the carbon dioxide can be separated from the flue gas stream. Two different concepts of separating the carbon dioxide from a combined cycle are compared, from the performance and the economical point of view, with a standard natural gas fired combined cycle where no attempts are made to reduce the carbon dioxide emissions. One concept is to use absorption technologies to separate the carbon dioxide from the flue gas stream. The other concept is based on a semi-closed gas turbine cycle using carbon dioxide as working fluid and combustion with pure oxygen, generated in an air-separating unit. The calculations show that the efficiency (power) drop is smaller for the first concept than for the second, 8.7 % points compared to 13.7 % points, when power is produced. When both heat and power are produced, the relation concerning the efficiency (power) remains. Regarding the overall efficiency (heat and power) the opposite relation is present. A possible carbon dioxide tax must exceed 0.21 SEK/kg CO{sub 2} for it to be profitable to separate carbon dioxide with any of these technologies.

  1. Due process traditionalism.

    Science.gov (United States)

    Sunstein, Cass R

    2008-06-01

    In important cases, the Supreme Court has limited the scope of "substantive due process" by reference to tradition, but it has yet to explain why it has done so. Due process traditionalism might be defended in several distinctive ways. The most ambitious defense draws on a set of ideas associated with Edmund Burke and Friedrich Hayek, who suggested that traditions have special credentials by virtue of their acceptance by many minds. But this defense runs into three problems. Those who have participated in a tradition may not have accepted any relevant proposition; they might suffer from a systematic bias; and they might have joined a cascade. An alternative defense sees due process traditionalism as a second-best substitute for two preferable alternatives: a purely procedural approach to the Due Process Clause, and an approach that gives legislatures the benefit of every reasonable doubt. But it is not clear that in these domains, the first-best approaches are especially attractive; and even if they are, the second-best may be an unacceptably crude substitute. The most plausible defense of due process traditionalism operates on rule-consequentialist grounds, with the suggestion that even if traditions are not great, they are often good, and judges do best if they defer to traditions rather than attempting to specify the content of "liberty" on their own. But the rule-consequentialist defense depends on controversial and probably false assumptions about the likely goodness of traditions and the institutional incapacities of judges.

  2. Customer Innovation Process Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

    2007-01-01

    Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been on diffe......Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... to handle shorter and faster product life cycles. Continuously changing customer needs are pushing companies' competence of continuous innovation to a maximum - but still this seems not to be enough to stay competitive on the global market and reach the goals of growth. This article therefore suggests...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

  3. VLSI signal processing technology

    CERN Document Server

    Swartzlander, Earl

    1994-01-01

    This book is the first in a set of forthcoming books focussed on state-of-the-art development in the VLSI Signal Processing area. It is a response to the tremendous research activities taking place in that field. These activities have been driven by two factors: the dramatic increase in demand for high speed signal processing, especially in consumer elec­ tronics, and the evolving microelectronic technologies. The available technology has always been one of the main factors in determining al­ gorithms, architectures, and design strategies to be followed. With every new technology, signal processing systems go through many changes in concepts, design methods, and implementation. The goal of this book is to introduce the reader to the main features of VLSI Signal Processing and the ongoing developments in this area. The focus of this book is on: • Current developments in Digital Signal Processing (DSP) pro­ cessors and architectures - several examples and case studies of existing DSP chips are discussed in...

  4. Ultrasonic processing of materials

    Energy Technology Data Exchange (ETDEWEB)

    Han, Q.; Sklad, P.S. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    2007-07-01

    In some widely used alloys, dissolved gas precipitates form from liquids during solidification and form pores among solid dendrites and grains. The pores can lead to defects in aluminum shape casting. Research has suggested that ultrasonic vibrations have the potential to reduce the impurities present in traditional degassing methods. This paper summarized the results of several projects investigating the use of high intensity ultrasonic vibrations for material processing. The mechanisms of grain refining using high-intensity ultrasonic vibration were also investigated. High intensity ultrasonic vibrations were tested for the degassing of molten aluminum, grain refinement of alloys for industrial applications, and the modification of welding structures. Results of the studies to date have demonstrated that power ultrasound can be used to degas molten metal as well as for the grain refinement of alloys during solidification processes. Tests have demonstrated that the best grain refining effect was achieved when ultrasonic vibrations were introduced in the molten alloy at approximately 10 degrees C higher than the liquid temperature. The process is also suitable for improving the microstructure of steel weldments, as the process can modify the size and morphology of the primary phase and the secondary phases during the solidification of the alloy. Small and spherical grains in the size range of 30 {delta}m were obtained in aluminum A356 alloys. It was concluded that the benefits of ultrasonic vibrations on the alloy process were more pronounced in smaller specimens. 13 refs., 10 figs.

  5. The Nursing Process

    Directory of Open Access Journals (Sweden)

    M. Hammond

    1978-09-01

    Full Text Available The essence of the nursing process can be summed up in this quotation by Sir Francis Bacon: “Human knowledge and human powers meet in one; for where the cause is not known the effect cannot be produced.” Arriving at a concise, accurate definition of the nursing process was, for me, an impossible task. It is altogether too vast and too personal a topic to contract down into a niftylooking, we-pay-lip-service-to-it cliché. So what I propose to do is to present my understanding of the nursing process throughout this essay, and then to leave the reader with some overall, general impression of what it all entails.

  6. A support design process

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, J.; Scott, P.B. [Health and Safety Executive (United Kingdom)

    2004-07-01

    A workman suffered a fatal injury due to a fall of ground from the face of a development drivage, which was supported by passive supports supplemented with roof bolts. A working party was set up to review the support process and evaluate how protection of the workmen could be improved whilst setting supports.The working party included representatives from the trade unions, the mines inspectorate and mine operators.Visits were made to several mines and discussions were held with the workmen and management at these mines. The paper describes the results of the visits and how a support design process was evolved. The process will ensure that the support system is designed to reduce the inherent hazards associated with setting supports using either conventional or mixed support systems.

  7. Quartz resonator processing system

    Science.gov (United States)

    Peters, Roswell D. M.

    1983-01-01

    Disclosed is a single chamber ultra-high vacuum processing system for the oduction of hermetically sealed quartz resonators wherein electrode metallization and sealing are carried out along with cleaning and bake-out without any air exposure between the processing steps. The system includes a common vacuum chamber in which is located a rotatable wheel-like member which is adapted to move a plurality of individual component sets of a flat pack resonator unit past discretely located processing stations in said chamber whereupon electrode deposition takes place followed by the placement of ceramic covers over a frame containing a resonator element and then to a sealing stage where a pair of hydraulic rams including heating elements effect a metallized bonding of the covers to the frame.

  8. Quantum independent increment processes

    CERN Document Server

    Franz, Uwe

    2005-01-01

    This volume is the first of two volumes containing the revised and completed notes lectures given at the school "Quantum Independent Increment Processes: Structure and Applications to Physics". This school was held at the Alfried-Krupp-Wissenschaftskolleg in Greifswald during the period March 9 – 22, 2003, and supported by the Volkswagen Foundation. The school gave an introduction to current research on quantum independent increment processes aimed at graduate students and non-specialists working in classical and quantum probability, operator algebras, and mathematical physics. The present first volume contains the following lectures: "Lévy Processes in Euclidean Spaces and Groups" by David Applebaum, "Locally Compact Quantum Groups" by Johan Kustermans, "Quantum Stochastic Analysis" by J. Martin Lindsay, and "Dilations, Cocycles and Product Systems" by B.V. Rajarama Bhat.

  9. Laser Processing and Chemistry

    CERN Document Server

    Bäuerle, Dieter

    2011-01-01

    This book gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of lasers in “standard” laser machining and laser chemical processing (LCP), including the patterning, coating, and modification of material surfaces. This fourth edition has been enlarged to cover the rapid advances in the understanding of the dynamics of materials under the action of ultrashort laser pulses, and to include a number of new topics, in particular the increasing importance of lasers in various different fields of surface functionalizations and nanotechnology. In two additional chapters, recent developments in biotechnology, medicine, art conservation and restoration are summarized. Graduate students, physicists, chemists, engineers, a...

  10. Process window metrology

    Science.gov (United States)

    Ausschnitt, Christopher P.; Chu, William; Hadel, Linda M.; Ho, Hok; Talvi, Peter

    2000-06-01

    This paper is the third of a series that defines a new approach to in-line lithography control. The first paper described the use of optically measurable line-shortening targets to enhance signal-to-noise and reduce measurement time. The second described the dual-tone optical critical dimension (OCD) measurement and analysis necessary to distinguish dose and defocus. Here we describe the marriage of dual-tone OCD to SEM-CD metrology that comprises what we call 'process window metrology' (PWM), the means to locate each measured site in dose and focus space relative to the allowed process window. PWM provides in-line process tracking and control essential to the successful implementation of low-k lithography.

  11. Radiation processes in astrophysics

    CERN Document Server

    Tucker, Wallace H

    1975-01-01

    The purpose of this book is twofold: to provide a brief, simple introduction to the theory of radiation and its application in astrophysics and to serve as a reference manual for researchers. The first part of the book consists of a discussion of the basic formulas and concepts that underlie the classical and quantum descriptions of radiation processes. The rest of the book is concerned with applications. The spirit of the discussion is to present simple derivations that will provide some insight into the basic physics involved and then to state the exact results in a form useful for applications. The reader is referred to the original literature and to reviews for rigorous derivations.The wide range of topics covered is illustrated by the following table of contents: Basic Formulas for Classical Radiation Processes; Basic Formulas for Quantum Radiation Processes; Cyclotron and Synchrotron Radiation; Electron Scattering; Bremsstrahlung and Collision Losses; Radiative Recombination; The Photoelectric Effect; a...

  12. Processes for xanthomonas biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Engelskirchen, K.; Stein, W.; Bahn, M.; Schieferstein, L.; Schindler, J.

    1984-03-27

    A process is described for producing xanthan gum in which the use of a stable, water-in-oil emulsion in the fermentation medium markedly lowers the viscosity of the medium, resulting in lower energy requirements for the process, and also resulting in enhanced yields of the biopolymer. In such an emulsion, the aqueous fermentation phase, with its microbial growth and metabolic processes, takes place in a finely dispersed homogeneous oil phase. The viscosity increase in each droplet of the aqueous nutrient solution will not noticeably affect this mixture in the fermenter because the viscosity of the reaction mixture in the fermenter is determined primarily by the viscosity of the oil phase. 45 claims

  13. Identification of wastewater processes

    DEFF Research Database (Denmark)

    Carstensen, Niels Jacob

    -known theory of the processes with the significant effects found in data. These models are called grey box models, and they contain rate expressions for the processes of influent load of nutrients, transport of nutrients between the aeration tanks, hydrolysis and growth of biomass, nitrification...... function. The grey box models are estimated on data sets from the Lundtofte pilot scale plant and the Aalborg West wastewater treatment plant. Estimation of Monod- kinetic expressions is made possible through the application of large data sets. Parameter extimates from the two plants show a reasonable......The introduction of on-line sensors for monitoring of nutrient salts concentrations on wastewater treatment plants with nutrient removal, opens a wide new area of modelling wastewater processes. The subject of this thesis is the formulation of operational dynamic models based on time series...

  14. Stochastic processes inference theory

    CERN Document Server

    Rao, Malempati M

    2014-01-01

    This is the revised and enlarged 2nd edition of the authors’ original text, which was intended to be a modest complement to Grenander's fundamental memoir on stochastic processes and related inference theory. The present volume gives a substantial account of regression analysis, both for stochastic processes and measures, and includes recent material on Ridge regression with some unexpected applications, for example in econometrics. The first three chapters can be used for a quarter or semester graduate course on inference on stochastic processes. The remaining chapters provide more advanced material on stochastic analysis suitable for graduate seminars and discussions, leading to dissertation or research work. In general, the book will be of interest to researchers in probability theory, mathematical statistics and electrical and information theory.

  15. Food Process Engineering

    DEFF Research Database (Denmark)

    Friis, Alan; Jensen, Bo Boye Busk; Risum, Jørgen

    This textbook is made for you to use as a study book and as a source of reference and inspiration to work with problems related to food production. Most textbooks are focused on the separate unit operations used in a production. We have tried to put a few of these operations into the broader...... context of a production. Only a few operations are treated specifically (transport of fluids, heating and cooling) as these operations are universal in all food productions and link different parts of production. A food production plant might be overwhelming in its apparent complexity. The methods...... introduced make it possible to get an overview of processes. We have included a chapter on how to make block-dia¬grams and material balances. This should help in analysing a production and to isolate the most important processing steps. Most processes in a food production are of physical nature, thus we have...

  16. Process of timbral composing

    Science.gov (United States)

    Withrow, Sam

    In this paper, I discuss the techniques and processes of timbral organization I developed while writing my chamber work, Afterimage. I compare my techniques with illustrative examples by other composers to place my work in historical context. I examine three elements of my composition process. The first is the process of indexing and cataloging basic sonic materials. The second consists of the techniques and mechanics of manipulating and assembling these collections into larger scale phrases, textures, and overall form in a musical work. The third element is the more elusive, and often extra-musical, source of inspiration and motivation. The evocative power of tone color is both immediately evident yet difficult to explain. What is timbre? This question cannot be answered solely in scientific terms; subjective factors affect our perception of it.

  17. Topological signal processing

    CERN Document Server

    Robinson, Michael

    2014-01-01

    Signal processing is the discipline of extracting information from collections of measurements. To be effective, the measurements must be organized and then filtered, detected, or transformed to expose the desired information.  Distortions caused by uncertainty, noise, and clutter degrade the performance of practical signal processing systems. In aggressively uncertain situations, the full truth about an underlying signal cannot be known.  This book develops the theory and practice of signal processing systems for these situations that extract useful, qualitative information using the mathematics of topology -- the study of spaces under continuous transformations.  Since the collection of continuous transformations is large and varied, tools which are topologically-motivated are automatically insensitive to substantial distortion. The target audience comprises practitioners as well as researchers, but the book may also be beneficial for graduate students.

  18. Improving Metal Casting Process

    Science.gov (United States)

    1998-01-01

    Don Sirois, an Auburn University research associate, and Bruce Strom, a mechanical engineering Co-Op Student, are evaluating the dimensional characteristics of an aluminum automobile engine casting. More accurate metal casting processes may reduce the weight of some cast metal products used in automobiles, such as engines. Research in low gravity has taken an important first step toward making metal products used in homes, automobiles, and aircraft less expensive, safer, and more durable. Auburn University and industry are partnering with NASA to develop one of the first accurate computer model predictions of molten metals and molding materials used in a manufacturing process called casting. Ford Motor Company's casting plant in Cleveland, Ohio is using NASA-sponsored computer modeling information to improve the casting process of automobile and light-truck engine blocks.

  19. COTS software selection process.

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, William M. (Strike Wire Technologies, Louisville, CO); Lin, Han Wei; McClelland, Kelly (U.S. Security Associates, Livermore, CA); Ullrich, Rebecca Ann; Khanjenoori, Soheil; Dalton, Karen; Lai, Anh Tri; Kuca, Michal; Pacheco, Sandra; Shaffer-Gant, Jessica

    2006-05-01

    Today's need for rapid software development has generated a great interest in employing Commercial-Off-The-Shelf (COTS) software products as a way of managing cost, developing time, and effort. With an abundance of COTS software packages to choose from, the problem now is how to systematically evaluate, rank, and select a COTS product that best meets the software project requirements and at the same time can leverage off the current corporate information technology architectural environment. This paper describes a systematic process for decision support in evaluating and ranking COTS software. Performed right after the requirements analysis, this process provides the evaluators with more concise, structural, and step-by-step activities for determining the best COTS software product with manageable risk. In addition, the process is presented in phases that are flexible to allow for customization or tailoring to meet various projects' requirements.

  20. NTP comparison process

    Science.gov (United States)

    Corban, Robert

    The systems engineering process for the concept definition phase of the program involves requirements definition, system definition, and consistent concept definition. The requirements definition process involves obtaining a complete understanding of the system requirements based on customer needs, mission scenarios, and nuclear thermal propulsion (NTP) operating characteristics. A system functional analysis is performed to provide a comprehensive traceability and verification of top-level requirements down to detailed system specifications and provides significant insight into the measures of system effectiveness to be utilized in system evaluation. The second key element in the process is the definition of system concepts to meet the requirements. This part of the process involves engine system and reactor contractor teams to develop alternative NTP system concepts that can be evaluated against specific attributes, as well as a reference configuration against which to compare system benefits and merits. Quality function deployment (QFD), as an excellent tool within Total Quality Management (TQM) techniques, can provide the required structure and provide a link to the voice of the customer in establishing critical system qualities and their relationships. The third element of the process is the consistent performance comparison. The comparison process involves validating developed concept data and quantifying system merits through analysis, computer modeling, simulation, and rapid prototyping of the proposed high risk NTP subsystems. The maximum amount possible of quantitative data will be developed and/or validated to be utilized in the QFD evaluation matrix. If upon evaluation of a new concept or its associated subsystems determine to have substantial merit, those features will be incorporated into the reference configuration for subsequent system definition and comparison efforts.

  1. AERONET Version 3 processing

    Science.gov (United States)

    Holben, B. N.; Slutsker, I.; Giles, D. M.; Eck, T. F.; Smirnov, A.; Sinyuk, A.; Schafer, J.; Rodriguez, J.

    2014-12-01

    The Aerosol Robotic Network (AERONET) database has evolved in measurement accuracy, data quality products, availability to the scientific community over the course of 21 years with the support of NASA, PHOTONS and all federated partners. This evolution is periodically manifested as a new data version release by carefully reprocessing the entire database with the most current algorithms that fundamentally change the database and ultimately the data products used by the community. The newest processing, Version 3, will be released in 2015 after the entire database is reprocessed and real-time data processing becomes operational. All V 3 algorithms have been developed, individually vetted and represent four main categories: aerosol optical depth (AOD) processing, inversion processing, database management and new products. The primary trigger for release of V 3 lies with cloud screening of the direct sun observations and computation of AOD that will fundamentally change all data available for analysis and all subsequent retrieval products. This presentation will illustrate the innovative approach used for cloud screening and assesses the elements of V3 AOD relative to the current version. We will also present the advances in the inversion product processing with emphasis on the random and systematic uncertainty estimates. This processing will be applied to the new hybrid measurement scenario intended to provide inversion retrievals for all solar zenith angles. We will introduce automatic quality assurance criteria that will allow near real time quality assured aerosol products necessary for real time satellite and model validation and assimilation. Last we will introduce the new management structure that will improve access to the data database. The current version 2 will be supported for at least two years after the initial release of V3 to maintain continuity for on going investigations.

  2. The Recruitment Process:

    DEFF Research Database (Denmark)

    Holm, Anna

    The aim of this research was to determine whether the introduction of e-recruitment has an impact on the process and underlying tasks, subtasks and activities of recruitment. Three large organizations with well-established e-recruitment practices were included in the study. The three case studies......, which were carried out in Denmark in 2008-2009 using qualitative research methods, revealed changes in the sequence, divisibility and repetitiveness of a number of recruitment tasks and subtasks. The new recruitment process design was identified and presented in the paper. The study concluded...

  3. Solar industrial process heat

    Energy Technology Data Exchange (ETDEWEB)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  4. Research Planning Process

    Science.gov (United States)

    Lofton, Rodney

    2010-01-01

    This presentation describes the process used to collect, review, integrate, and assess research requirements desired to be a part of research and payload activities conducted on the ISS. The presentation provides a description of: where the requirements originate, to whom they are submitted, how they are integrated into a requirements plan, and how that integrated plan is formulated and approved. It is hoped that from completing the review of this presentation, one will get an understanding of the planning process that formulates payload requirements into an integrated plan used for specifying research activities to take place on the ISS.

  5. Data processing on FPGAs

    CERN Document Server

    Teubner, Jens

    2013-01-01

    Roughly a decade ago, power consumption and heat dissipation concerns forced the semiconductor industry to radically change its course, shifting from sequential to parallel computing. Unfortunately, improving performance of applications has now become much more difficult than in the good old days of frequency scaling. This is also affecting databases and data processing applications in general, and has led to the popularity of so-called data appliances-specialized data processing engines, where software and hardware are sold together in a closed box. Field-programmable gate arrays (FPGAs) incr

  6. Advanced Polymer Processing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Muenchausen, Ross E. [Los Alamos National Laboratory

    2012-07-25

    Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

  7. Multivariate Statistical Process Control

    DEFF Research Database (Denmark)

    Kulahci, Murat

    2013-01-01

    As sensor and computer technology continues to improve, it becomes a normal occurrence that we confront with high dimensional data sets. As in many areas of industrial statistics, this brings forth various challenges in statistical process control (SPC) and monitoring for which the aim...... is to identify “out-of-control” state of a process using control charts in order to reduce the excessive variation caused by so-called assignable causes. In practice, the most common method of monitoring multivariate data is through a statistic akin to the Hotelling’s T2. For high dimensional data with excessive...

  8. Thermal stir welding process

    Science.gov (United States)

    Ding, R. Jeffrey (Inventor)

    2012-01-01

    A welding method is provided for forming a weld joint between first and second elements of a workpiece. The method includes heating the first and second elements to form an interface of material in a plasticized or melted state interface between the elements. The interface material is then allowed to cool to a plasticized state if previously in a melted state. The interface material, while in the plasticized state, is then mixed, for example, using a grinding/extruding process, to remove any dendritic-type weld microstructures introduced into the interface material during the heating process.

  9. Rubber compounding and processing

    CSIR Research Space (South Africa)

    John

    2014-06-01

    Full Text Available stream_source_info John_2014_ABSTRACT ONLY.pdf.txt stream_content_type text/plain stream_size 886 Content-Encoding ISO-8859-1 stream_name John_2014_ABSTRACT ONLY.pdf.txt Content-Type text/plain; charset=ISO-8859...-1 Handbook of Green Materials Processing Technologies, Properties and Applications Chapter 15 RUBBER COMPOUNDING AND PROCESSING MAYA JACOB JOHN1,2 1CSIR Materials Science and Manufacturing, Polymers and Composites Competence Area, P.O. Box 1124...

  10. Semantic and Process Interoperability

    Directory of Open Access Journals (Sweden)

    Félix Oscar Fernández Peña

    2010-05-01

    Full Text Available Knowledge management systems support education at different levels of the education. This is very important for the process in which the higher education of Cuba is involved. Structural transformations of teaching are focused on supporting the foundation of the information society in the country. This paper describes technical aspects of the designing of a model for the integration of multiple knowledgemanagement tools supporting teaching. The proposal is based on the definition of an ontology for the explicit formal description of the semantic of motivations of students and teachers in the learning process. Its target is to facilitate knowledge spreading.

  11. Statecharts Via Process Algebra

    Science.gov (United States)

    Luttgen, Gerald; vonderBeeck, Michael; Cleaveland, Rance

    1999-01-01

    Statecharts is a visual language for specifying the behavior of reactive systems. The Language extends finite-state machines with concepts of hierarchy, concurrency, and priority. Despite its popularity as a design notation for embedded system, precisely defining its semantics has proved extremely challenging. In this paper, a simple process algebra, called Statecharts Process Language (SPL), is presented, which is expressive enough for encoding Statecharts in a structure-preserving and semantic preserving manner. It is establish that the behavioral relation bisimulation, when applied to SPL, preserves Statecharts semantics

  12. Genomic signal processing

    CERN Document Server

    Shmulevich, Ilya

    2007-01-01

    Genomic signal processing (GSP) can be defined as the analysis, processing, and use of genomic signals to gain biological knowledge, and the translation of that knowledge into systems-based applications that can be used to diagnose and treat genetic diseases. Situated at the crossroads of engineering, biology, mathematics, statistics, and computer science, GSP requires the development of both nonlinear dynamical models that adequately represent genomic regulation, and diagnostic and therapeutic tools based on these models. This book facilitates these developments by providing rigorous mathema

  13. Biomedical Image Processing

    CERN Document Server

    Deserno, Thomas Martin

    2011-01-01

    In modern medicine, imaging is the most effective tool for diagnostics, treatment planning and therapy. Almost all modalities have went to directly digital acquisition techniques and processing of this image data have become an important option for health care in future. This book is written by a team of internationally recognized experts from all over the world. It provides a brief but complete overview on medical image processing and analysis highlighting recent advances that have been made in academics. Color figures are used extensively to illustrate the methods and help the reader to understand the complex topics.

  14. Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2016-01-01

    structured and holistic method of decision making toward nearly zero-energy building renovation. The methodology is evolutive, implementable on a large scale, and allows an optimal integration of nonexpert decision makers. In practice, such a scheme allowed most behavioral barriers to sustainable home...... renovation to be overcome. The homeowners were better integrated and their preferences and immaterial values were better taken into account. To keep the decision-making process economically viable and timely, the process as known today still needs to be improved, and new tools need to be developed...

  15. Hard exclusive QCD processes

    Energy Technology Data Exchange (ETDEWEB)

    Kugler, W.

    2007-01-15

    Hard exclusive processes in high energy electron proton scattering offer the opportunity to get access to a new generation of parton distributions, the so-called generalized parton distributions (GPDs). This functions provide more detailed informations about the structure of the nucleon than the usual PDFs obtained from DIS. In this work we present a detailed analysis of exclusive processes, especially of hard exclusive meson production. We investigated the influence of exclusive produced mesons on the semi-inclusive production of mesons at fixed target experiments like HERMES. Further we give a detailed analysis of higher order corrections (NLO) for the exclusive production of mesons in a very broad range of kinematics. (orig.)

  16. Exoplanet atmospheres physical processes

    CERN Document Server

    Seager, Sara

    2010-01-01

    Over the past twenty years, astronomers have identified hundreds of extrasolar planets--planets orbiting stars other than the sun. Recent research in this burgeoning field has made it possible to observe and measure the atmospheres of these exoplanets. This is the first textbook to describe the basic physical processes--including radiative transfer, molecular absorption, and chemical processes--common to all planetary atmospheres, as well as the transit, eclipse, and thermal phase variation observations that are unique to exoplanets. In each chapter, Sara Seager offers a conceptual introdu

  17. An Integrated Design Process

    DEFF Research Database (Denmark)

    Petersen, Mads Dines; Knudstrup, Mary-Ann

    2010-01-01

    Present paper is placed in the discussion about how sustainable measures are integrated in the design process by architectural offices. It presents results from interviews with four leading Danish architectural offices working with sustainable architecture and their experiences with it, as well...... as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...... the environmental measures cannot be discarded due to extra costs....

  18. An Integrated Desgin Process

    DEFF Research Database (Denmark)

    Petersen, Mads Dines; Knudstrup, Mary-Ann

    2010-01-01

    Present paper is placed in the discussion about how sustainable measures are integrated in the design process by architectural offices. It presents results from interviews with four leading Danish architectural offices working with sustainable architecture and their experiences with it, as well...... as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...... the environmental measures cannot be discarded due to extra costs....

  19. Mapping Individual Logical Processes

    Science.gov (United States)

    Smetana, Frederick O.

    1975-01-01

    A technique to measure and describe concisely a certain class of individual mental reasoning processes has been developed. The measurement is achieved by recording the complete dialog between a large, varied computerized information system with a broad range of logical operations and options and a human information seeker. (Author/RC)

  20. Authenticizing the Research Process

    Directory of Open Access Journals (Sweden)

    Nora Elizondo-Schmelkes, MA, Ph.D. Candidate

    2011-06-01

    Full Text Available This study reflects the main concern of students (national and international who are trying to get a postgraduate degree in a third world (or “in means of development” country. The emergent problem found is that students have to finish their thesis or dissertation but they do not really know how to accomplish this goal. They resolve this problem by authenticizing the process as their own. The theory of authenticizing involves compassing their way to solve the problem of advancing in the research process. Compassing allows the student to authenticize his/her research process, making it a personal and „owned. process. The main categories of compassing are the intellectual, physical and emotional dimension patterns that the student has, learns and follows in order to finish the project and get a degree. Authenticizing implies to author with authenticity their thesis or dissertation. Compassing allows them to do this in their own way, at their own pace or time and with their own internal resources, strengths and weaknesses.

  1. Automated process planning system

    Science.gov (United States)

    Mann, W.

    1978-01-01

    Program helps process engineers set up manufacturing plans for machined parts. System allows one to develop and store library of similar parts characteristics, as related to particular facility. Information is then used in interactive system to help develop manufacturing plans that meet required standards.

  2. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...

  3. Pattern evaporation process

    Directory of Open Access Journals (Sweden)

    Z. Żółkiewicz

    2007-04-01

    Full Text Available The paper discusses the process of thermal evaporation of a foundry pattern. At several research-development centres, studies have been carried out to examine the physico-chemical phenomena that take place in foundry mould filled with polystyrene pattern when it is poured with molten metal. In the technique of evaporative patterns, the process of mould filling with molten metal (the said mould holding inside a polystyrene pattern is interrelated with the process of thermal decomposition of this pattern. The transformation of an evaporative pattern (e.g. made from foamed polystyrene from the solid into liquid and then gaseous state occurs as a result of the thermal effect that the liquid metal exerts onto this pattern. Consequently, at the liquid metal-pattern-mould phase boundary some physico-chemical phenomena take place, which until now have not been fully explained. When the pattern is evaporating, some solid and gaseous products are evolved, e.g. CO, CO2, H2, N2, and hydrocarbons, e.g. styrene, toluene, ethane, methane, benzene [16, 23]. The process of polystyrene pattern evaporation in foundry mould under the effect of molten metal is of a very complex nature and depends on many different factors, still not fully investigated. The kinetics of pattern evaporation is also affected by the technological properties of foundry mould, e.g. permeability, thermophysical properties, parameters of the gating system, temperature of pouring, properties of pattern material, and the size of pattern-liquid metal contact surface.

  4. Electrochemical Discharge Machining Process

    Directory of Open Access Journals (Sweden)

    Anjali V. Kulkarni

    2007-09-01

    Full Text Available Electrochemical discharge machining process is evolving as a promising micromachiningprocess. The experimental investigations in the present work substantiate this trend. In the presentwork, in situ, synchronised, transient temperature and current measurements have been carriedout. The need for the transient measurements arose due to the time-varying nature of the dischargeformation and time varying circuit current. Synchronised and transient measurements revealedthe discrete nature of the process. It also helped in formulating the basic mechanism for thedischarge formation and the material removal in the process. Temperature profile on workpieceand in electrochemical discharge machining cell is experimentally measured using pyrometer,and two varieties of K-type thermocouples. Surface topography of the discharge-affected zoneson the workpiece has been carried out using scanning electron microscope. Measurements andsurface topographical studies reveal the potential use of this process for machining in micronregime. With careful experimental set-up design, suitable supply voltage and its polarity, theprocess can be applied for both micromachining and micro-deposition. It can be extended formachining and or deposition of wide range of materials.

  5. Stochastic conditional intensity processes

    DEFF Research Database (Denmark)

    Bauwens, Luc; Hautsch, Nikolaus

    2006-01-01

    model allows for a wide range of (cross-)autocorrelation structures in multivariate point processes. The model is estimated by simulated maximum likelihood (SML) using the efficient importance sampling (EIS) technique. By modeling price intensities based on NYSE trading, we provide significant evidence...

  6. The Serendipitous Research Process

    Science.gov (United States)

    Nutefall, Jennifer E.; Ryder, Phyllis Mentzell

    2010-01-01

    This article presents the results of an exploratory study asking faculty in the first-year writing program and instruction librarians about their research process focusing on results specifically related to serendipity. Steps to prepare for serendipity are highlighted as well as a model for incorporating serendipity into a first-year writing…

  7. Communicating Process Achitectures 2005

    NARCIS (Netherlands)

    Broenink, Jan F.; Roebbers, Herman W.; Sunters, Johan P.E.; Welch, Peter H.; Wood, David C.

    2005-01-01

    The awareness of the ideas characterized by Communicating Processes Architecture and their adoption by industry beyond their traditional base in safety-critical systems and security is growing. The complexity of modern computing systems has become so great that no one person – maybe not even a small

  8. Normal modified stable processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Shephard, N.

    2002-01-01

    Gaussian (NGIG) laws. The wider framework thus established provides, in particular, for added flexibility in the modelling of the dynamics of financial time series, of importance especially as regards OU based stochastic volatility models for equities. In the special case of the tempered stable OU process...

  9. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models. These ...

  10. Video processing project

    CSIR Research Space (South Africa)

    Globisch, R

    2009-03-01

    Full Text Available Video processing source code for algorithms and tools used in software media pipelines (e.g. image scalers, colour converters, etc.) The currently available source code is written in C++ with their associated libraries and DirectShow- Filters....

  11. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Konopka, Claudia; Nellemann, Peter

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...

  12. Attentional Processes in Autism.

    Science.gov (United States)

    Goldstein, Gerald; Johnson, Cynthia R.; Minshew, Nancy J.

    2001-01-01

    Attention processes in 103 children and adults with high functioning autism were compared with a matched control group using a battery of attention measures. Differences were found only on tasks which placed demands on cognitive flexibility or psychomotor speed, suggesting that purported attention deficits in autism may actually be primary…

  13. Quantum image processing?

    Science.gov (United States)

    Mastriani, Mario

    2017-01-01

    This paper presents a number of problems concerning the practical (real) implementation of the techniques known as quantum image processing. The most serious problem is the recovery of the outcomes after the quantum measurement, which will be demonstrated in this work that is equivalent to a noise measurement, and it is not considered in the literature on the subject. It is noteworthy that this is due to several factors: (1) a classical algorithm that uses Dirac's notation and then it is coded in MATLAB does not constitute a quantum algorithm, (2) the literature emphasizes the internal representation of the image but says nothing about the classical-to-quantum and quantum-to-classical interfaces and how these are affected by decoherence, (3) the literature does not mention how to implement in a practical way (at the laboratory) these proposals internal representations, (4) given that quantum image processing works with generic qubits, this requires measurements in all axes of the Bloch sphere, logically, and (5) among others. In return, the technique known as quantum Boolean image processing is mentioned, which works with computational basis states (CBS), exclusively. This methodology allows us to avoid the problem of quantum measurement, which alters the results of the measured except in the case of CBS. Said so far is extended to quantum algorithms outside image processing too.

  14. The magnetization process: Hysteresis

    Science.gov (United States)

    Balsamel, Richard

    1990-01-01

    The magnetization process, hysteresis (the difference in the path of magnetization for an increasing and decreasing magnetic field), hysteresis loops, and hard magnetic materials are discussed. The fabrication of classroom projects for demonstrating hysteresis and the hysteresis of common magnetic materials is described in detail.

  15. Industrial Information Processing

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    This paper demonstrates, how cross-functional business processes may be aligned with product specification systems in an intra-organizational environment by integrating planning systems and expert systems, thereby providing an end-to-end integrated and an automated solution to the “build-to-order...

  16. Students' Differentiated Translation Processes

    Science.gov (United States)

    Bossé, Michael J.; Adu-Gyamfi, Kwaku; Chandler, Kayla

    2014-01-01

    Understanding how students translate between mathematical representations is of both practical and theoretical importance. This study examined students' processes in their generation of symbolic and graphic representations of given polynomial functions. The purpose was to investigate how students perform these translations. The result of the study…

  17. Governing Knowledge Processes

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Husted, Kenneth; Michailova, Snejina;

    2003-01-01

    An under-researched issue in work within the `knowledge movement' is therelation between organizational issues and knowledge processes (i.e., sharingand creating knowledge). We argue that managers can shape formalorganization structure and organization forms and can influence the moreinformal...

  18. Image Processing Software

    Science.gov (United States)

    Bosio, M. A.

    1990-11-01

    ABSTRACT: A brief description of astronomical image software is presented. This software was developed in a Digital Micro Vax II Computer System. : St presenta una somera descripci6n del software para procesamiento de imagenes. Este software fue desarrollado en un equipo Digital Micro Vax II. : DATA ANALYSIS - IMAGE PROCESSING

  19. Performance Evaluation Process.

    Science.gov (United States)

    1998

    This document contains four papers from a symposium on the performance evaluation process and human resource development (HRD). "Assessing the Effectiveness of OJT (On the Job Training): A Case Study Approach" (Julie Furst-Bowe, Debra Gates) is a case study of the effectiveness of OJT in one of a high-tech manufacturing company's product…

  20. Optoelectronic Information Processing

    Science.gov (United States)

    2012-03-07

    printing for III- V/Si heterogeneous integration • Single layer Si NM photonic crystal Fano membrane reflector (MR) replaces conventional DBR ... Monolithic integration on focal plane arrays using standard processes • Wavelength & polarization tunable on pixel by pixel basis • Collection...photonic crystals, nano-antennas, nano-emitters & modulators . [Agency Reviews, National Academies input] Integrated Photonics, Optical Components

  1. Food processing in action

    Science.gov (United States)

    Radio frequency (RF) heating is a commonly used food processing technology that has been applied for drying and baking as well as thawing of frozen foods. Its use in pasteurization, as well as for sterilization and disinfection of foods, is more limited. This column will review various RF heating ap...

  2. An Integrated Design Process

    DEFF Research Database (Denmark)

    Petersen, Mads Dines; Knudstrup, Mary-Ann

    2010-01-01

    as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...

  3. An Integrated Desgin Process

    DEFF Research Database (Denmark)

    Petersen, Mads Dines; Knudstrup, Mary-Ann

    2010-01-01

    as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...

  4. Sparsity and Information Processing

    OpenAIRE

    Ikeda, Shiro

    2015-01-01

    Recently, many information processing methods utilizing the sparsity of the information source is studied. We have reported some results on this line of research. Here we pick up two results from our own works. One is an image reconstruction method for radio interferometory and the other is a motor command computation method for a two-joint arm.

  5. Image Processing for Teaching.

    Science.gov (United States)

    Greenberg, R.; And Others

    1993-01-01

    The Image Processing for Teaching project provides a powerful medium to excite students about science and mathematics, especially children from minority groups and others whose needs have not been met by traditional teaching. Using professional-quality software on microcomputers, students explore a variety of scientific data sets, including…

  6. Image-Processing Program

    Science.gov (United States)

    Roth, D. J.; Hull, D. R.

    1994-01-01

    IMAGEP manipulates digital image data to effect various processing, analysis, and enhancement functions. It is keyboard-driven program organized into nine subroutines. Within subroutines are sub-subroutines also selected via keyboard. Algorithm has possible scientific, industrial, and biomedical applications in study of flows in materials, analysis of steels and ores, and pathology, respectively.

  7. Flax shive thermocatalytic processing

    Science.gov (United States)

    Sulman, E. M.; Lugovoy, Yu. V.; Chalov, K. V.; Kosivtsov, Yu. Yu.; Stepacheva, A. A.; Shimanskaya, E. I.

    2016-11-01

    In the paper the thermogravimetric study of biomass waste thermodestruction process is presented. Metal chlorides have the highest influence on the flax shive thermodestruction. The results of kinetic modeling are also shown on the base of thermogravimetric analysis both of the samples of flax shive and flax shive with addition of 10% (wt.) nickel chloride at different heating rate.

  8. Obsolescence: the underlying processes

    NARCIS (Netherlands)

    Thomsen, A.F.; Nieboer, N.E.T.; Van der Flier, C.L.

    2015-01-01

    Obsolescence, defined as the process of declining performance of buildings, is a serious threat for the value, the usefulness and the life span of housing properties. Thomsen and van der Flier (2011) developed a model in which obsolescence is categorised on the basis of two distinctions, namely betw

  9. Ultrahigh bandwidth signal processing

    Science.gov (United States)

    Oxenløwe, Leif Katsuo

    2016-04-01

    Optical time lenses have proven to be very versatile for advanced optical signal processing. Based on a controlled interplay between dispersion and phase-modulation by e.g. four-wave mixing, the processing is phase-preserving, and hence useful for all types of data signals including coherent multi-level modulation formats. This has enabled processing of phase-modulated spectrally efficient data signals, such as orthogonal frequency division multiplexed (OFDM) signals. In that case, a spectral telescope system was used, using two time lenses with different focal lengths (chirp rates), yielding a spectral magnification of the OFDM signal. Utilising such telescopic arrangements, it has become possible to perform a number of interesting functionalities, which will be described in the presentation. This includes conversion from OFDM to Nyquist WDM, compression of WDM channels to a single Nyquist channel and WDM regeneration. These operations require a broad bandwidth nonlinear platform, and novel photonic integrated nonlinear platforms like aluminum gallium arsenide nano-waveguides used for 1.28 Tbaud optical signal processing will be described.

  10. Building Science Process Skills

    Science.gov (United States)

    DeFina, Anthony V.

    2006-01-01

    A well-designed and executed field trip experience serves not only to enrich and supplement course content, but also creates opportunities to build basic science process skills. The National Science Education Standards call for science teachers "to design and manage learning environments that provide students with the time, space, and resources…

  11. Advanced Biosignal Processing

    CERN Document Server

    Nait-Ali, Amine

    2009-01-01

    Presents the principle of many advanced biosignal processing techniques. This title introduces the main biosignal properties and the acquisition techniques. It concerns one of the most intensively used biosignals in the clinical routine, namely the Electrocardiogram, the Elektroenzephalogram, the Electromyogram and the Evoked Potential

  12. Photonic curvilinear data processing

    Science.gov (United States)

    Browning, Clyde; Quaglio, Thomas; Figueiro, Thiago; Pauliac, Sébastien; Belledent, Jérôme; Fay, Aurélien; Bustos, Jessy; Marusic, Jean-Christophe; Schiavone, Patrick

    2014-10-01

    With more and more photonic data presence in e-beam lithography, the need for efficient and accurate data fracturing is required to meet acceptable manufacturing cycle time. Large photonic based layouts now create high shot count patterns for VSB based tools. Multiple angles, sweeping curves, and non-orthogonal data create a challenge for today's e-beam tools that are more efficient on Manhattan style data. This paper describes techniques developed and used for creating fractured data for VSB based pattern generators. Proximity Effect Correction is also applied during the fracture process, taking into account variable shot sizes to apply for accuracy and design style. Choosing different fracture routines for pattern data on-the-fly allows for fast and efficient processing. Data interpretation is essential for processing curvilinear data as to its size, angle, and complexity. Fracturing complex angled data into "efficient" shot counts is no longer practical as shot creation now requires knowledge of the actual data content as seen in photonic based pattern data. Simulation and physical printing results prove the implementations for accuracy and write times compared to traditional VSB writing strategies on photonic data. Geometry tolerance is used as part of the fracturing algorithm for controlling edge placement accuracy and tuning to different e-beam processing parameters.

  13. Cascaded Poisson processes

    Science.gov (United States)

    Matsuo, Kuniaki; Saleh, Bahaa E. A.; Teich, Malvin Carl

    1982-12-01

    We investigate the counting statistics for stationary and nonstationary cascaded Poisson processes. A simple equation is obtained for the variance-to-mean ratio in the limit of long counting times. Explicit expressions for the forward-recurrence and inter-event-time probability density functions are also obtained. The results are expected to be of use in a number of areas of physics.

  14. Restricted broadcast process theory

    NARCIS (Netherlands)

    Ghassemi, F.; Fokkink, W.J.; Movaghar, A.; Cerone, A.; Gruner, S.

    2008-01-01

    We present a process algebra for modeling and reasoning about Mobile Ad hoc Networks (MANETs) and their protocols. In our algebra we model the essential modeling concepts of ad hoc networks, i.e. local broadcast, connectivity of nodes and connectivity changes. Connectivity and connectivity changes a

  15. ERGONOMICS AND PROCESS AUTOMATION

    OpenAIRE

    Carrión Muñoz, Rolando; Docente de la FII - UNMSM

    2014-01-01

    The article shows the role that ergonomics in automation of processes, and the importance for Industrial Engineering.  El artículo nos muestra el papel que tiene la ergonomía en la automatización de los procesos, y la importancia para la Ingeniería Industrial.

  16. Qualitative Process Theory.

    Science.gov (United States)

    1984-07-01

    write a heat flow process that violates energy conservation and transfers " caloric fluid" between the source and destination. The assumptions made about...removed in ease of ex1-0ClCits. Seco nd, if’ thle program is drawNing concilsions that rely criticaillyoi atClrsum in, then1 it IIos’t test ss

  17. Audio Spectral Processing

    Science.gov (United States)

    2010-05-01

    Global Security & Engineering Solutions Division 1300-B Floyd Avenue Rome, NY 13440-4615 8. PERFORMING ORGANIZATION REPORT NUMBER...18 1 1. BACKGROUND This report is being submitted by L-3 Global Security...tasks. Utilized the Avid Xpress video enhancement system to process the Group 2, Phase II competency test A. This was done to attempt to recreate

  18. Matchmaking for business processes

    NARCIS (Netherlands)

    Wombacher, Andreas; Fankhauser, Peter; Mahleko, Bendick; Neuhold, Erich

    2003-01-01

    Web services have a potential to enhance B2B ecommerce over the Internet by allowing companies and organizations to publish their business processes on service directories where potential trading partners can find them. This can give rise to new business paradigms based on ad-hoc trading relations a

  19. BUSINESS PROCESS REENGINEERING

    Directory of Open Access Journals (Sweden)

    Magdalena LUCA (DEDIU

    2014-06-01

    Full Text Available Business process reengineering determines the change of organizational functions from an orientation focused on operations through a multidimensional approach. Former employees who were mere executors are now determined to take their own decisions and as a result the functional departments lose their reason to exist. Managers do not act anymore as supervisors, but mainly as mentors, while the employees focus more attention on customer needs and less than the head’s. Under these conditions, new organizational paradigms are required, the most important being that of learning organizations. In order to implement a reengineering of the economic processes and promoting a new organizational paradigm the information technology plays a decisive role. The article presents some results obtained in a research theme ANSTI funded by contract no. 501/2000. Economic and financial analysis is performed in order to know the current situation to achieve better results in the future. One of its objectives is the production analyzed as a labour process and the interaction elements of this process. The indicators investigated in the analysis of financial and economic activity of production reflect the development directions, the means and resources to accomplish predetermined objectives and express the results and effectiveness of what is expected.

  20. Rethinking lessons learned processes

    NARCIS (Netherlands)

    Buttler, T.; Lukosch, S.G.; Kolfschoten, G.L.; Verbraeck, A.

    2012-01-01

    Lessons learned are one way to retain experience and knowledge in project-based organizations, helping them to prevent reinventin,g the wheel or to repeat past mistakes. However, there are several challenges that make these lessonts learned processes a challenging endeavor. These include capturing

  1. Gaia downlink data processing

    Science.gov (United States)

    Siddiqui, H.; Els, S. G.; Guerra, R.; Cheek, N.; Mora, A.; O'Mullane, W.

    2014-08-01

    The Gaia survey mission, operated by the European Space Agency (ESA) and launched on 19 December 2013, will survey approximately 109 stars or 1% of the galactic stellar population over a 5.5 year period. The main purpose of this mission is micro-arcsecond astrometry, that would yield important insights into the kinematics of the galaxy, its evolution, as well as provide important additional findings, including a updated coordinate reference system to that provided by the ICRS. Gaia performs its observations using two telescopes with fields of view separated by 106.5 degrees, spinning around an orthogonal axis at about 6 hours per day. The spin axis itself precesses: it is always oriented at 45 degrees from the sun, and precesses around the sun every 63 days. Thus each part of the sky is observed approximately every 63 days. The 6-hour spin, or scan-rate matches the CCD readout rate. The amount of data to process per day - 50-130 Gigabytes - corresponds to over 30 million stellar sources. To perform this processing, the Gaia Data Processing and Analysis Consortium (DPAC) have developed approximately 2 million lines of software, divided into subsystems specific to a given functional need, that are run across 6 different Data Processing Centres (DPCs). The final result being a catalog including the 109 stars observed. Most of the daily processing is performed at the DPC in ESAC, Spain (DPCE), which runs 3 main subsystems, the MOC Interface Task (MIT), the Initial Data Treatment (IDT), and First Look (FL). The MIT ingests the initial data provided by the MOC in the form of binary data and writes (amongst other things) `star packets' containing the raw stellar information needed for IDT, which provides a basic level of processing, including stellar positions, photometry, radial velocities, cross match and catalogue updates. FL determines the payload health (e.g, the health for the 106 CCDs, geometric calibration) and astrometric performance via the one day astrometric

  2. Cassini science planning process

    Science.gov (United States)

    Paczkowski, Brian G.; Ray, Trina L.

    2004-01-01

    The mission design for Cassini-Huygens calls for a four-year orbital survey of the Saturnian system and the descent into the Titan atmosphere and eventual soft-landing of the Huygens probe. The Cassini orbiter tour consists of 76 orbits around Saturn with 44 close Titan flybys and 8 targeted icy satellite flybys. The Cassini orbiter spacecraft carries twelve scientific instruments that will perform a wide range of observations on a multitude of designated targets. The science opportunities, frequency of encounters, the length of the Tour, and the use of distributed operations pose significant challenges for developing the science plan for the orbiter mission. The Cassini Science Planning Process is the process used to develop and integrate the science and engineering plan that incorporates an acceptable level of science required to meet the primary mission objectives far the orbiter. The bulk of the integrated science and engineering plan will be developed prior to Saturn Orbit Insertion (Sol). The Science Planning Process consists of three elements: 1) the creation of the Tour Atlas, which identifies the science opportunities in the tour, 2) the development of the Science Operations Plan (SOP), which is the conflict-free timeline of all science observations and engineering activities, a constraint-checked spacecraft pointing profile, and data volume allocations to the science instruments, and 3) an Aftermarket and SOP Update process, which is used to update the SOP while in tour with the latest information on spacecraft performance, science opportunities, and ephemerides. This paper will discuss the various elements of the Science Planning Process used on the Cassini Mission to integrate, implement, and adapt the science and engineering activity plans for Tour.

  3. Biosphere Process Model Report

    Energy Technology Data Exchange (ETDEWEB)

    J. Schmitt

    2000-05-25

    To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion Factors (BDCFs) developed for use in TSPA. The Biosphere PMR does not present or summarize estimates of potential radiation doses to human receptors. Dose calculations are performed as part of TSPA and will be presented in the TSPA documentation. The biosphere model is a component of the process to evaluate postclosure repository performance and regulatory compliance for a potential monitored geologic repository at Yucca Mountain, Nevada. The biosphere model describes those exposure pathways in the biosphere by which radionuclides released from a potential repository could reach a human receptor

  4. PROcess Based Diagnostics PROBE

    Science.gov (United States)

    Clune, T.; Schmidt, G.; Kuo, K.; Bauer, M.; Oloso, H.

    2013-01-01

    Many of the aspects of the climate system that are of the greatest interest (e.g., the sensitivity of the system to external forcings) are emergent properties that arise via the complex interplay between disparate processes. This is also true for climate models most diagnostics are not a function of an isolated portion of source code, but rather are affected by multiple components and procedures. Thus any model-observation mismatch is hard to attribute to any specific piece of code or imperfection in a specific model assumption. An alternative approach is to identify diagnostics that are more closely tied to specific processes -- implying that if a mismatch is found, it should be much easier to identify and address specific algorithmic choices that will improve the simulation. However, this approach requires looking at model output and observational data in a more sophisticated way than the more traditional production of monthly or annual mean quantities. The data must instead be filtered in time and space for examples of the specific process being targeted.We are developing a data analysis environment called PROcess-Based Explorer (PROBE) that seeks to enable efficient and systematic computation of process-based diagnostics on very large sets of data. In this environment, investigators can define arbitrarily complex filters and then seamlessly perform computations in parallel on the filtered output from their model. The same analysis can be performed on additional related data sets (e.g., reanalyses) thereby enabling routine comparisons between model and observational data. PROBE also incorporates workflow technology to automatically update computed diagnostics for subsequent executions of a model. In this presentation, we will discuss the design and current status of PROBE as well as share results from some preliminary use cases.

  5. Privatization Process in Kosovo

    Directory of Open Access Journals (Sweden)

    Ing. Florin Aliu

    2014-06-01

    Full Text Available Privatization is considered an initial step toward market economy, restructuring financial and economic sector that enables competition in the economy. Privatization is the most painful process in economy where beside legal establishment and political will, it includes also the aspect of fairness and honesty. Analysis of this process is based on the models and comparisons between Kosovo and countries of central and Eastern Europe, in order to give a clearer picture on the overall process of privatization in Kosovo Methodology that is used to analyze this issue is based on empirical results and also qualitative interpretation of the models and also on studying particular asset privatization process. A widely discussed case of privatization in Kosovo is that of Post and Telecom of Kosovo (PTK. Since each company has its own value, I have focused my appraising analysis on the financial statements with a special observation on Cash Flow from Operation, as the most significant indicator on showing how company is using her physical and human recourses to generate money. I have based my research on using methodology of discounted cash flow from operation analysis, even though the company valuation was done using net cash flow from operation analysis. Cash Flow valuation then was discounted by the T-bonds interest rate. This paper tries to bring a conclusion that privatization process in Kosovo have not brought the results excepted, firstly by setting an inappropriate price of assets and lastly by restructuring overall privatization sector and the overall industry. Kosovo, consequently, lost a big opportunity to create a competitive environment of financial industry: starting from the banking industry followed the pension trust which remained at their initial steps of development

  6. Retinomorphic image processing.

    Science.gov (United States)

    Ghosh, Kuntal; Bhaumik, Kamales; Sarkar, Sandip

    2008-01-01

    The present work is aimed at understanding and explaining some of the aspects of visual signal processing at the retinal level while exploiting the same towards the development of some simple techniques in the domain of digital image processing. Classical studies on retinal physiology revealed the nature of contrast sensitivity of the receptive field of bipolar or ganglion cells, which lie in the outer and inner plexiform layers of the retina. To explain these observations, a difference of Gaussian (DOG) filter was suggested, which was subsequently modified to a Laplacian of Gaussian (LOG) filter for computational ease in handling two-dimensional retinal inputs. Till date almost all image processing algorithms, used in various branches of science and engineering had followed LOG or one of its variants. Recent observations in retinal physiology however, indicate that the retinal ganglion cells receive input from a larger area than the classical receptive fields. We have proposed an isotropic model for the non-classical receptive field of the retinal ganglion cells, corroborated from these recent observations, by introducing higher order derivatives of Gaussian expressed as linear combination of Gaussians only. In digital image processing, this provides a new mechanism of edge detection on one hand and image half-toning on the other. It has also been found that living systems may sometimes prefer to "perceive" the external scenario by adding noise to the received signals in the pre-processing level for arriving at better information on light and shade in the edge map. The proposed model also provides explanation to many brightness-contrast illusions hitherto unexplained not only by the classical isotropic model but also by some other Gestalt and Constructivist models or by non-isotropic multi-scale models. The proposed model is easy to implement both in the analog and digital domain. A scheme for implementation in the analog domain generates a new silicon retina

  7. RASSP signal processing architectures

    Science.gov (United States)

    Shirley, Fred; Bassett, Bob; Letellier, J. P.

    1995-06-01

    The rapid prototyping of application specific signal processors (RASSP) program is an ARPA/tri-service effort to dramatically improve the process by which complex digital systems, particularly embedded signal processors, are specified, designed, documented, manufactured, and supported. The domain of embedded signal processing was chosen because it is important to a variety of military and commercial applications as well as for the challenge it presents in terms of complexity and performance demands. The principal effort is being performed by two major contractors, Lockheed Sanders (Nashua, NH) and Martin Marietta (Camden, NJ). For both, improvements in methodology are to be exercised and refined through the performance of individual 'Demonstration' efforts. The Lockheed Sanders' Demonstration effort is to develop an infrared search and track (IRST) processor. In addition, both contractors' results are being measured by a series of externally administered (by Lincoln Labs) six-month Benchmark programs that measure process improvement as a function of time. The first two Benchmark programs are designing and implementing a synthetic aperture radar (SAR) processor. Our demonstration team is using commercially available VME modules from Mercury Computer to assemble a multiprocessor system scalable from one to hundreds of Intel i860 microprocessors. Custom modules for the sensor interface and display driver are also being developed. This system implements either proprietary or Navy owned algorithms to perform the compute-intensive IRST function in real time in an avionics environment. Our Benchmark team is designing custom modules using commercially available processor ship sets, communication submodules, and reconfigurable logic devices. One of the modules contains multiple vector processors optimized for fast Fourier transform processing. Another module is a fiberoptic interface that accepts high-rate input data from the sensors and provides video-rate output data to a

  8. Vaccine process technology.

    Science.gov (United States)

    Josefsberg, Jessica O; Buckland, Barry

    2012-06-01

    The evolution of vaccines (e.g., live attenuated, recombinant) and vaccine production methods (e.g., in ovo, cell culture) are intimately tied to each other. As vaccine technology has advanced, the methods to produce the vaccine have advanced and new vaccine opportunities have been created. These technologies will continue to evolve as we strive for safer and more immunogenic vaccines and as our understanding of biology improves. The evolution of vaccine process technology has occurred in parallel to the remarkable growth in the development of therapeutic proteins as products; therefore, recent vaccine innovations can leverage the progress made in the broader biotechnology industry. Numerous important legacy vaccines are still in use today despite their traditional manufacturing processes, with further development focusing on improving stability (e.g., novel excipients) and updating formulation (e.g., combination vaccines) and delivery methods (e.g., skin patches). Modern vaccine development is currently exploiting a wide array of novel technologies to create safer and more efficacious vaccines including: viral vectors produced in animal cells, virus-like particles produced in yeast or insect cells, polysaccharide conjugation to carrier proteins, DNA plasmids produced in E. coli, and therapeutic cancer vaccines created by in vitro activation of patient leukocytes. Purification advances (e.g., membrane adsorption, precipitation) are increasing efficiency, while innovative analytical methods (e.g., microsphere-based multiplex assays, RNA microarrays) are improving process understanding. Novel adjuvants such as monophosphoryl lipid A, which acts on antigen presenting cell toll-like receptors, are expanding the previously conservative list of widely accepted vaccine adjuvants. As in other areas of biotechnology, process characterization by sophisticated analysis is critical not only to improve yields, but also to determine the final product quality. From a regulatory

  9. Managing Process Variants in the Process Life Cycle

    NARCIS (Netherlands)

    Hallerbach, A.; Bauer, Th.; Reichert, M.U.

    2007-01-01

    When designing process-aware information systems, often variants of the same process have to be specified. Each variant then constitutes an adjustment of a particular process to specific requirements building the process context. Current Business Process Management (BPM) tools do not adequately supp

  10. Process and Post-Process: A Discursive History.

    Science.gov (United States)

    Matsuda, Paul Kei

    2003-01-01

    Examines the history of process and post-process in composition studies, focusing on ways in which terms, such as "current-traditional rhetoric,""process," and "post-process" have contributed to the discursive construction of reality. Argues that use of the term post-process in the context of second language writing needs to be guided by a…

  11. Modeling of biopharmaceutical processes. Part 2: Process chromatography unit operation

    DEFF Research Database (Denmark)

    Kaltenbrunner, Oliver; McCue, Justin; Engel, Philip;

    2008-01-01

    Process modeling can be a useful tool to aid in process development, process optimization, and process scale-up. When modeling a chromatography process, one must first select the appropriate models that describe the mass transfer and adsorption that occurs within the porous adsorbent...

  12. Fundamentals of process intensification: A process systems engineering view

    DEFF Research Database (Denmark)

    Babi, Deenesh Kavi; Sales Cruz, Alfonso Mauricio; Gani, Rafiqul

    2016-01-01

    This chapter gives an overview of the fundamentals of process intensification from a process systems engineering point of view. The concept of process intensification, including process integration, is explained together with the drivers for applying process intensification, which can be achieved...... intensification using a systems approach....

  13. Material flow of production process

    OpenAIRE

    Hanzelová Marcela

    2001-01-01

    This paper deals with material flow of the production process. We present the block diagram of material flow and capacities of engine in various plants each other. In this paper is used IPO (Input Process Output) diagram. IPO diagram described process with aspect to input and output. Production program regards string of precision, branch and paralel processes with aspect IPO diagram.Process is not important with aspect to events. We are looking on the process as a black box. For process is ...

  14. Process Improvement: Customer Service.

    Science.gov (United States)

    Cull, Donald

    2015-01-01

    Utilizing the comment section of patient satisfaction surveys, Clark Memorial Hospital in Jeffersonville, IN went through a thoughtful process to arrive at an experience that patients said they wanted. Two Lean Six Sigma tools were used--the Voice of the Customer (VoC) and the Affinity Diagram. Even when using these tools, a facility will not be able to accomplish everything the patient may want. Guidelines were set and rules were established for the Process Improvement Team in order to lessen frustration, increase focus, and ultimately be successful. The project's success is driven by the team members carrying its message back to their areas. It's about ensuring that everyone is striving to improve the patients' experience by listening to what they say is being done right and what they say can be done better. And then acting on it.

  15. The aluminum smelting process.

    Science.gov (United States)

    Kvande, Halvor

    2014-05-01

    This introduction to the industrial primary aluminum production process presents a short description of the electrolytic reduction technology, the history of aluminum, and the importance of this metal and its production process to modern society. Aluminum's special qualities have enabled advances in technologies coupled with energy and cost savings. Aircraft capabilities have been greatly enhanced, and increases in size and capacity are made possible by advances in aluminum technology. The metal's flexibility for shaping and extruding has led to architectural advances in energy-saving building construction. The high strength-to-weight ratio has meant a substantial reduction in energy consumption for trucks and other vehicles. The aluminum industry is therefore a pivotal one for ecological sustainability and strategic for technological development.

  16. Organic food processing

    DEFF Research Database (Denmark)

    Kahl, Johannes; Alborzi, Farnaz; Beck, Alexander

    2014-01-01

    In 2007 EU Regulation (EC) 834/2007 introduced principles and criteria for organic food processing. These regulations have been analysed and discussed in several scientific publications and research project reports. Recently, organic food quality was described by principles, aspects and criteria....... These principles from organic agriculture were verified and adapted for organic food processing. Different levels for evaluation were suggested. In another document, underlying paradigms and consumer perception of organic food were reviewed against functional food, resulting in identifying integral product...... identity as the underlying paradigm and a holistic quality view connected to naturalness as consumers' perception of organic food quality. In a European study, the quality concept was applied to the organic food chain, resulting in a problem, namely that clear principles and related criteria were missing...

  17. [In Process Citation].

    Science.gov (United States)

    Yildirim, Ayhan; Metzler, Philipp; Lanzer, Martin; Lübbers, Heinz-Theo; Yildirim, Vedat

    2015-01-01

    Solcoseryl® is a protein-free haemodialysate, containing a broad spectrum of low molecular components of cellular mass and blood serum obtained from veal calves. Solcoseryl® improves the transport of oxygen and glucose to cells that are under hypoxic conditions. It increases the synthesis of intracellular ATP and contributes to an increase in the level of aerobic glycolysis and oxidative phosphorylation. It activates the reparative and regenerative processes in tissues by stimulating fibroblast proliferation and repair of the collagen vascular wall. The formulations of Solcoseryl® are infusion, injection, gel and ointment, and it is also available as a dental paste for inflammatory processes of the mouth cavity, gums and lips.

  18. Integral Politics as Process

    Directory of Open Access Journals (Sweden)

    Tom Atlee

    2010-03-01

    Full Text Available Using the definition proposed here, integral politics can be a process of integrating diverse perspectives into wholesome guidance for a community or society. Characteristics that follow from this definition have ramifications for understanding what such political processes involve. Politics becomes integral as it transcends partisan battle and nurtures generative conversation toward the common good. Problems, conflicts and crises become opportunities for new (or renewed social coherence. Conversational methodologies abound that can help citizen awareness temporarily expand during policy-making, thus helping raise society’s manifested developmental stage. Convening archetypal stakeholders or randomly selected citizens in conversations designed to engage the broader public enhances democratic legitimacy. With minimal issue- and candidate-advocacy, integral political leaders would develop society’s capacity to use integral conversational tools to improve its health, resilience, and collective intelligence. This both furthers and manifests evolution becoming conscious of itself.

  19. A Logical Process Calculus

    Science.gov (United States)

    Cleaveland, Rance; Luettgen, Gerald; Bushnell, Dennis M. (Technical Monitor)

    2002-01-01

    This paper presents the Logical Process Calculus (LPC), a formalism that supports heterogeneous system specifications containing both operational and declarative subspecifications. Syntactically, LPC extends Milner's Calculus of Communicating Systems with operators from the alternation-free linear-time mu-calculus (LT(mu)). Semantically, LPC is equipped with a behavioral preorder that generalizes Hennessy's and DeNicola's must-testing preorder as well as LT(mu's) satisfaction relation, while being compositional for all LPC operators. From a technical point of view, the new calculus is distinguished by the inclusion of: (1) both minimal and maximal fixed-point operators and (2) an unimple-mentability predicate on process terms, which tags inconsistent specifications. The utility of LPC is demonstrated by means of an example highlighting the benefits of heterogeneous system specification.

  20. Posttranslational processing of progastrin

    DEFF Research Database (Denmark)

    Bundgaard, Jens René; Rehfeld, Jens F.

    2010-01-01

    Gastrin and cholecystokinin (CCK) are homologous hormones with important functions in the brain and the gut. Gastrin is the main regulator of gastric acid secretion and gastric mucosal growth, whereas cholecystokinin regulates gall bladder emptying, pancreatic enzyme secretion and besides acts...... as a major neurotransmitter in the central and peripheral nervous systems. The tissue-specific expression of the hormones is regulated at the transcriptional level, but the posttranslational phase is also decisive and is highly complex in order to ensure accurate maturation of the prohormones in a cell...... processing progastrin is often greatly disturbed in neoplastic cells.The posttranslational phase of the biogenesis of gastrin and the various progastrin products in gastrin gene-expressing tissues is now reviewed here. In addition, the individual contributions of the processing enzymes are discussed...

  1. Beyond the search process

    DEFF Research Database (Denmark)

    Hyldegård, Jette

    2009-01-01

    . It is concluded that the ISP-model does not fully comply with group members' problem solving process and the involved information seeking behavior. Further, complex academic problem solving seems to be even more complex when it is performed in a group based setting. The study contributes with a new conceptual...... an assignment. It is investigated if group members' information behavior differ from the individual information seeker in the ISP-model and to what extent this behavior is influenced by contextual (work task) and social (group work) factors. Three groups of LIS students were followed during a 14 weeks period...... in 2004/2005 (10 participants). Quantitative and qualitative methods were employed, such as demographic surveys, process surveys, diaries and interviews. Similarities in behavior were found between group members and the individual in Kuhlthau's ISP-model with regard to the general stages of information...

  2. The Player Engagement Process

    DEFF Research Database (Denmark)

    Schoenau-Fog, Henrik

    2011-01-01

    Engagement is an essential element of the player experience, and the concept is described in various ways in the literature. To gain a more detailed comprehension of this multifaceted concept, and in order to better understand what aspects can be used to evaluate engaging game play and to design...... engaging user experiences, this study investigates one dimension of player engagement by empirically identifying the components associated with the desire to continue playing. Based on a description of the characteristics of player engagement, a series of surveys were developed to discover the components......, categories and triggers involved in this process. By applying grounded theory to the analysis of the responses, a process-oriented player engagement framework was developed and four main components consisting of objectives, activities, accomplishments and affects as well as the corresponding categories...

  3. Thin film interconnect processes

    Science.gov (United States)

    Malik, Farid

    Interconnects and associated photolithography and etching processes play a dominant role in the feature shrinkage of electronic devices. Most interconnects are fabricated by use of thin film processing techniques. Planarization of dielectrics and novel metal deposition methods are the focus of current investigations. Spin-on glass, polyimides, etch-back, bias-sputtered quartz, and plasma-enhanced conformal films are being used to obtain planarized dielectrics over which metal films can be reliably deposited. Recent trends have been towards chemical vapor depositions of metals and refractory metal silicides. Interconnects of the future will be used in conjunction with planarized dielectric layers. Reliability of devices will depend to a large extent on the quality of the interconnects.

  4. The precaution adoption process.

    Science.gov (United States)

    Weinstein, N D

    1988-01-01

    This article presents a critique of current models of preventive behavior. It discusses a variety of factors that are usually overlooked-including the appearance of costs and benefits over time, the role of cues to action, the problem of competing life demands, and the ways that actual decision behavior differs from the rational ideal implicit in expectancy-value and utility theories. Such considerations suggest that the adoption of new precautions should be viewed as a dynamic process with many determinants. The framework of a model that is able to accommodate these additional factors is described. This alternative model portrays the precaution adoption process as an orderly sequence of qualitatively different cognitive stages. Data illustrating a few of the suggestions made in the article are presented, and implications for prevention programs are discussed.

  5. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas

    and constructivist multiple criteria decision-making analysis method is selected for developing the work further. The method is introduced and applied to the renovation of a multi-residential historic building. Furthermore, a new scheme, the Integrated Renovation Process, is presented. Finally, the methodology....... In this thesis, examples of nearly zero energy single-family home renovations are presented. The most relevant existing decision support methods and tools applicable to sustainable renovation processes are reviewed and their applicability to high performance sustainable renovation is discussed. A qualitative...... performance sustainable renovations. The main purpose of the work has been to develop a holistic methodology so as to inspire and guide building owners and their renovation project teams to reach high levels of social, environmental and economic performances. The research approach integrates multiple...

  6. Plant hydrocarbon recovery process

    Energy Technology Data Exchange (ETDEWEB)

    Dzadzic, P.M.; Price, M.C.; Shih, C.J.; Weil, T.A.

    1982-01-26

    A process for production and recovery of hydrocarbons from hydrocarbon-containing whole plants in a form suitable for use as chemical feedstocks or as hydrocarbon energy sources which process comprises: (A) pulverizing by grinding or chopping hydrocarbon-containing whole plants selected from the group consisting of euphorbiaceae, apocynaceae, asclepiadaceae, compositae, cactaceae and pinaceae families to a suitable particle size, (B) drying and preheating said particles in a reducing atmosphere under positive pressure (C) passing said particles through a thermal conversion zone containing a reducing atmosphere and with a residence time of 1 second to about 30 minutes at a temperature within the range of from about 200* C. To about 1000* C., (D) separately recovering the condensable vapors as liquids and the noncondensable gases in a condition suitable for use as chemical feedstocks or as hydrocarbon fuels.

  7. Instabilities in sensory processes

    Science.gov (United States)

    Balakrishnan, J.

    2014-07-01

    In any organism there are different kinds of sensory receptors for detecting the various, distinct stimuli through which its external environment may impinge upon it. These receptors convey these stimuli in different ways to an organism's information processing region enabling it to distinctly perceive the varied sensations and to respond to them. The behavior of cells and their response to stimuli may be captured through simple mathematical models employing regulatory feedback mechanisms. We argue that the sensory processes such as olfaction function optimally by operating in the close proximity of dynamical instabilities. In the case of coupled neurons, we point out that random disturbances and fluctuations can move their operating point close to certain dynamical instabilities triggering synchronous activity.

  8. Yeast nuclear RNA processing

    Institute of Scientific and Technical Information of China (English)

    Jade; Bernstein; Eric; A; Toth

    2012-01-01

    Nuclear RNA processing requires dynamic and intricately regulated machinery composed of multiple enzymes and their cofactors.In this review,we summarize recent experiments using Saccharomyces cerevisiae as a model system that have yielded important insights regarding the conversion of pre-RNAs to functional RNAs,and the elimination of aberrant RNAs and unneeded intermediates from the nuclear RNA pool.Much progress has been made recently in describing the 3D structure of many elements of the nuclear degradation machinery and its cofactors.Similarly,the regulatory mechanisms that govern RNA processing are gradually coming into focus.Such advances invariably generate many new questions,which we highlight in this review.

  9. Sensors for Process Control

    Science.gov (United States)

    Tschulena, G.

    1988-01-01

    Sensors are one of the key elements for the automation in the manufacturing and process technology. The sensor field is presently within a restructuring process, directed to a stronger utilization of solid state technologies. This restructuring is governed by the utilization of solid state physical effects, by the use of reproducible fabrication techniques, and by the market driving forces. The state of the art of sensors in modern fabrication techniques will be demonstrated in examples, namely for sensors in silicon technology, in thin film technology and in thick film/screen printing technology. Some important physical and technological problems to be solved for the development of new and advanced sensor families will be outlined. Sensor development is strongly directed to the minaturization of devices and to the integration of different sensors to multisensors, as well as the integration between sensors and microelectronics.

  10. Plutonium dissolution process

    Science.gov (United States)

    Vest, Michael A.; Fink, Samuel D.; Karraker, David G.; Moore, Edwin N.; Holcomb, H. Perry

    1996-01-01

    A two-step process for dissolving plutonium metal, which two steps can be carried out sequentially or simultaneously. Plutonium metal is exposed to a first mixture containing approximately 1.0M-1.67M sulfamic acid and 0.0025M-0.1M fluoride, the mixture having been heated to a temperature between 45.degree. C. and 70.degree. C. The mixture will dissolve a first portion of the plutonium metal but leave a portion of the plutonium in an oxide residue. Then, a mineral acid and additional fluoride are added to dissolve the residue. Alteratively, nitric acid in a concentration between approximately 0.05M and 0.067M is added to the first mixture to dissolve the residue as it is produced. Hydrogen released during the dissolution process is diluted with nitrogen.

  11. Youpi: YOUr processing PIpeline

    Science.gov (United States)

    Monnerville, Mathias; Sémah, Gregory

    2012-03-01

    Youpi is a portable, easy to use web application providing high level functionalities to perform data reduction on scientific FITS images. Built on top of various open source reduction tools released to the community by TERAPIX (http://terapix.iap.fr), Youpi can help organize data, manage processing jobs on a computer cluster in real time (using Condor) and facilitate teamwork by allowing fine-grain sharing of results and data. Youpi is modular and comes with plugins which perform, from within a browser, various processing tasks such as evaluating the quality of incoming images (using the QualityFITS software package), computing astrometric and photometric solutions (using SCAMP), resampling and co-adding FITS images (using SWarp) and extracting sources and building source catalogues from astronomical images (using SExtractor). Youpi is useful for small to medium-sized data reduction projects; it is free and is published under the GNU General Public License.

  12. Fastdata processing with Spark

    CERN Document Server

    Karau, Holden

    2013-01-01

    This book will be a basic, step-by-step tutorial, which will help readers take advantage of all that Spark has to offer.Fastdata Processing with Spark is for software developers who want to learn how to write distributed programs with Spark. It will help developers who have had problems that were too much to be dealt with on a single computer. No previous experience with distributed programming is necessary. This book assumes knowledge of either Java, Scala, or Python.

  13. Parallel processing ITS

    Energy Technology Data Exchange (ETDEWEB)

    Fan, W.C.; Halbleib, J.A. Sr.

    1996-09-01

    This report provides a users` guide for parallel processing ITS on a UNIX workstation network, a shared-memory multiprocessor or a massively-parallel processor. The parallelized version of ITS is based on a master/slave model with message passing. Parallel issues such as random number generation, load balancing, and communication software are briefly discussed. Timing results for example problems are presented for demonstration purposes.

  14. Near Shore Wave Processes

    Science.gov (United States)

    2016-06-07

    the alongshore current, and a full non linear bottom shear stress. Contributions from the alongshore wind stress are mostly evident offshore and over...fraction) profiles measured on a day with offshore wave height of 1.6m, and 10 ms-1 wind speed. The one hour mean void fraction profiles are measured in a...given the offshore wave conditions. OBJECTIVES We hypothesize that the wave-induced kinematic, sediment and morphologic processes are nonlinearly

  15. Aluminum powder metallurgy processing

    Energy Technology Data Exchange (ETDEWEB)

    Flumerfelt, J.F.

    1999-02-12

    The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization, commercial inert gas atomization, and gas atomization reaction synthesis (GARS). A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

  16. Sample Data Processing.

    Science.gov (United States)

    1982-08-01

    the relative practicality of compensating the channel with an approach of predistorting the masking sequence, by processing in a filter that...replicates the channel response, with a conventional approach of equal- izing the channel with an inverse filter. The predistortion method demonstrated a...compensate for the channel distortion is to predistort the encryption stream in the receiver by means of a fil- ter which replicates the impulse response of

  17. Inelastic Light Scattering Processes

    Science.gov (United States)

    Fouche, Daniel G.; Chang, Richard K.

    1973-01-01

    Five different inelastic light scattering processes will be denoted by, ordinary Raman scattering (ORS), resonance Raman scattering (RRS), off-resonance fluorescence (ORF), resonance fluorescence (RF), and broad fluorescence (BF). A distinction between fluorescence (including ORF and RF) and Raman scattering (including ORS and RRS) will be made in terms of the number of intermediate molecular states which contribute significantly to the scattered amplitude, and not in terms of excited state lifetimes or virtual versus real processes. The theory of these processes will be reviewed, including the effects of pressure, laser wavelength, and laser spectral distribution on the scattered intensity. The application of these processes to the remote sensing of atmospheric pollutants will be discussed briefly. It will be pointed out that the poor sensitivity of the ORS technique cannot be increased by going toward resonance without also compromising the advantages it has over the RF technique. Experimental results on inelastic light scattering from I(sub 2) vapor will be presented. As a single longitudinal mode 5145 A argon-ion laser line was tuned away from an I(sub 2) absorption line, the scattering was observed to change from RF to ORF. The basis, of the distinction is the different pressure dependence of the scattered intensity. Nearly three orders of magnitude enhancement of the scattered intensity was measured in going from ORF to RF. Forty-seven overtones were observed and their relative intensities measured. The ORF cross section of I(sub 2) compared to the ORS cross section of N2 was found to be 3 x 10(exp 6), with I(sub 2) at its room temperature vapor pressure.

  18. Pyrolysis process and apparatus

    Science.gov (United States)

    Lee, Chang-Kuei

    1983-01-01

    This invention discloses a process and apparatus for pyrolyzing particulate coal by heating with a particulate solid heating media in a transport reactor. The invention tends to dampen fluctuations in the flow of heating media upstream of the pyrolysis zone, and by so doing forms a substantially continuous and substantially uniform annular column of heating media flowing downwardly along the inside diameter of the reactor. The invention is particularly useful for bituminous or agglomerative type coals.

  19. The Creative Drawing process

    DEFF Research Database (Denmark)

    Flensborg, Ingelise

    ­nec­ting link bet­ween perception and higher mental processes. By this me­ans it also be­comes possible to ex­plain the sche­ma con­cept in a deve­lop­mental perspec­tive. A schema is a mental structure that is constantly modified by experience through perceiving, action and movement, and some of its structure...

  20. Processing Nanostructured Structural Ceramics

    Science.gov (United States)

    2006-08-01

    aspects of the processing of nanostructured ceramics, viz. • • • The production of a flowable and compactable dry nanopowder suitable for use in... composition due to the different synthesis routes used. Therefore, ‘industry-standard’ dispersants can cause flocculation rather than dispersion...stabilised zirconia (3-YSZ) were no higher than for conventional, micron-sized material of the same composition . However, detailed crystallographic

  1. Assessing intern handover processes.

    Science.gov (United States)

    Habicht, Robert; Block, Lauren; Silva, Kathryn Novello; Oliver, Nora; Wu, Albert; Feldman, Leonard

    2016-06-01

    New standards for resident work hours set in 2011 changed the landscape of patient care in teaching hospitals, and resulted in new challenges for US residency training programmes to overcome. One such challenge was a dramatic increase in the number of patient handovers performed by residents. As a result, there is a renewed focus for clinical teachers to develop educational strategies to optimise the patient handover process and improve the quality of patient care and safety. In order to investigate current gaps in resident handovers, we examined the handover processes performed by medicine interns at two academic medical centres in Baltimore, Maryland, USA. We used trained observers to collect data on whether handovers were conducted face to face, with questions asked, in private locations, with written documentation, and without distractions or interruptions. Results were analysed using chi-square tests, and adjusted for clustering at the observer and intern levels. Interns successfully conducted handovers face to face (99.5%), asked questions (85.3%), used private locations (91%), included written handover documentation (95.8%) and did not experience distractions for the majority of the time (87.7%); however, interruptions were pervasive, occurring 41.3 per cent of the time. In order to investigate current gaps in resident handovers, we examined the handover processes performed by medicine interns Interns conducted patient handovers face to face, with questions asked, in private locations, with written documentation and without distractions the majority of the time; however, interruptions during the handover process were common. Exploring gaps at the individual programme level is a critical first step to develop effective teaching strategies to optimise handovers in residency. © 2015 John Wiley & Sons Ltd.

  2. Topology and mental processes.

    Science.gov (United States)

    McLeay, H

    2000-08-01

    The study reported here considers the effect of rotation on the decision time taken to compare nonrigid objects, presented as like and unlike pairs of knots and unknots. The results for 48 subjects, 21 to 45 years old, support the notion that images which have a characteristic 'foundation part' are more easily stored and accessed in the brain. Also, there is evidence that the comparison of deformable objects is processed by mental strategies other than self-evident mental rotation.

  3. Viruses as living processes.

    Science.gov (United States)

    Dupré, John; Guttinger, Stephan

    2016-10-01

    The view that life is composed of distinct entities with well-defined boundaries has been undermined in recent years by the realisation of the near omnipresence of symbiosis. What had seemed to be intrinsically stable entities have turned out to be systems stabilised only by the interactions between a complex set of underlying processes (Dupré, 2012). This has not only presented severe problems for our traditional understanding of biological individuality but has also led some to claim that we need to switch to a process ontology to be able adequately to understand biological systems. A large group of biological entities, however, has been excluded from these discussions, namely viruses. Viruses are usually portrayed as stable and distinct individuals that do not fit the more integrated and collaborative picture of nature implied by symbiosis. In this paper we will contest this view. We will first discuss recent findings in virology that show that viruses can be 'nice' and collaborate with their hosts, meaning that they form part of integrated biological systems and processes. We further offer various reasons why viruses should be seen as processes rather than things, or substances. Based on these two claims we will argue that, far from serving as a counterexample to it, viruses actually enable a deeper understanding of the fundamentally interconnected and collaborative nature of nature. We conclude with some reflections on the debate as to whether viruses should be seen as living, and argue that there are good reasons for an affirmative answer to this question. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Image processing occupancy sensor

    Science.gov (United States)

    Brackney, Larry J.

    2016-09-27

    A system and method of detecting occupants in a building automation system environment using image based occupancy detection and position determinations. In one example, the system includes an image processing occupancy sensor that detects the number and position of occupants within a space that has controllable building elements such as lighting and ventilation diffusers. Based on the position and location of the occupants, the system can finely control the elements to optimize conditions for the occupants, optimize energy usage, among other advantages.

  5. Evaluation of Long-Term Migration Testing from Can Coatings into Food Simulants: Polyester Coatings.

    Science.gov (United States)

    Paseiro-Cerrato, Rafael; Noonan, Gregory O; Begley, Timothy H

    2016-03-23

    FDA guidance for food contact substances recommends that for food packaging intended for use at sterilized, high temperature processed, or retorted conditions, a migration test with a retort step at 121 °C for 2 h followed by a 10 day migration test at 40 °C should be performed. These conditions are in intended to simulate processing and long-term storage. However, can coatings may be in contact with food for years, and there are very few data evaluating if this short-term testing accurately simulates migration over extended time periods. A long-term migration test at 40 °C with retorted and non-retorted polyester cans using several food simulants (water, 3% acetic acid, 10% ethanol, 50% ethanol, and isooctane) was conducted to verify whether traditional migration testing protocols accurately predict migration from food contact materials used for extended time periods. Time points were from 1 day to 515 days. HPLC-MS/MS was used to analyze polyester monomers, and oligomer migration was monitored using HPLC-DAD/CAD and HPLC-MS. Concentrations of monomers and oligomers increased during the migration experiments, especially in ethanol food simulants. The data suggest that current FDA migration protocols may need to be modified to address changes in migrants as a result of long-term storage conditions.

  6. Western states enhanced oil shale recovery program: Shale oil production facilities conceptual design studies report

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    This report analyzes the economics of producing syncrude from oil shale combining underground and surface processing using Occidental's Modified-In-Situ (MIS) technology and Lawrence Livermore National Laboratory's (LLNL) Hot Recycled Solids (HRS) retort. These retorts form the basic technology employed for oil extraction from oil shale in this study. Results are presented for both Commercial and Pre-commercial programs. Also analyzed are Pre-commercialization cost of Demonstration and Pilot programs which will confirm the HRS and MIS concepts and their mechanical designs. These programs will provide experience with the circulating Fluidized Bed Combustor (CFBC), the MIS retort, the HRS retort and establish environmental control parameters. Four cases are considered: commercial size plant, demonstration size plant, demonstration size plant minimum CFBC, and a pilot size plant. Budget cost estimates and schedules are determined. Process flow schemes and basic heat and material balances are determined for the HRS system. Results consist of summaries of major equipment sizes, capital cost estimates, operating cost estimates and economic analyses. 35 figs., 35 tabs.

  7. Paraho oil shale project. [Coloardo

    Energy Technology Data Exchange (ETDEWEB)

    Pforzheimer, H.

    1976-01-01

    The Paraho Oil Shale Project is a privately financed program to prove the Paraho retorting process and hardware on oil shale at Anvil Points, Colo., near Rifle. The project was launched in late 1973 under the sponsorship of 17 participants many of whom were active in earlier oil shale research. Two new Paraho retorts, a pilot and a semiworks size unit, were installed at Anvil Points. The oil-shale mine on the adjacent Naval Oil Shale Reserve was reactivated. The mine and new retorts were put into operation during 1974. The pilot plant is used to explore operating parameters in order to define conditions for testing in the larger semiworks size retort. The experimental operations in 1974 set the stage for the successful runs in 1975 and early 1976. The results of the Paraho operations to date have been encouraging. They demonstrate that the process works, that the equipment is durable, and that both are environmentally acceptable on a pilot and a semiworks plant scale.

  8. Process for protein PEGylation.

    Science.gov (United States)

    Pfister, David; Morbidelli, Massimo

    2014-04-28

    PEGylation is a versatile drug delivery technique that presents a particularly wide range of conjugation chemistry and polymer structure. The conjugated protein can be tuned to specifically meet the needs of the desired application. In the area of drug delivery this typically means to increase the persistency in the human body without affecting the activity profile of the original protein. On the other hand, because of the high costs associated with the production of therapeutic proteins, subsequent operations imposed by PEGylation must be optimized to minimize the costs inherent to the additional steps. The closest attention has to be given to the PEGylation reaction engineering and to the subsequent purification processes. This review article focuses on these two aspects and critically reviews the current state of the art with a clear focus on the development of industrial scale processes which can meet the market requirements in terms of quality and costs. The possibility of using continuous processes, with integration between the reaction and the separation steps is also illustrated.

  9. The Caroline interrogatory process

    Energy Technology Data Exchange (ETDEWEB)

    Degagne, D. [Alberta Energy and Utilities Board, Calgary, AB (Canada); Gibson, T. [Gecko Management, Calgary, AB (Canada)

    1999-11-01

    Using the specific case study of the Caroline interrogatory process, an example is given of how an effective communications and public involvement program can re-establish trust and credibility levels within an community after an incident. The public is nervous about sour gas, especially about blowouts of gas from a pipeline. The post-approval period was marked by high expectations and a community consultation program which included a community advisory board, an emergency planning committee, socio-economic factors, and environmental monitoring and studies. Information and education involves newspaper articles, newsletters, tours, public consultation meetings, and weekly e-mail. Mercury was detected as a potential hazard at the site, and company actions are illustrated. Overall lessons learned included: starting early paid off, face to face resident contacts were the most effective, the willingness to make changes was the key to success, the community helped, knowing all the answers is not essential, and there is a need for empathy. The interrogatory process includes a hybrid technique that is comprised of four stages: 1) process review and public input, 2) identification and clarification of issues, 3) responses by industry and government, and 4) a public forum and follow-up action.

  10. The Caroline interrogatory process

    Energy Technology Data Exchange (ETDEWEB)

    Degagne, D. (Alberta Energy and Utilities Board, Calgary, AB (Canada)); Gibson, T. (Gecko Management, Calgary, AB (Canada))

    1999-01-01

    Using the specific case study of the Caroline interrogatory process, an example is given of how an effective communications and public involvement program can re-establish trust and credibility levels within an community after an incident. The public is nervous about sour gas, especially about blowouts of gas from a pipeline. The post-approval period was marked by high expectations and a community consultation program which included a community advisory board, an emergency planning committee, socio-economic factors, and environmental monitoring and studies. Information and education involves newspaper articles, newsletters, tours, public consultation meetings, and weekly e-mail. Mercury was detected as a potential hazard at the site, and company actions are illustrated. Overall lessons learned included: starting early paid off, face to face resident contacts were the most effective, the willingness to make changes was the key to success, the community helped, knowing all the answers is not essential, and there is a need for empathy. The interrogatory process includes a hybrid technique that is comprised of four stages: 1) process review and public input, 2) identification and clarification of issues, 3) responses by industry and government, and 4) a public forum and follow-up action.

  11. Process measuring techniques; Prozessmesstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Freudenberger, A.

    2000-07-01

    This introduction into measurement techniques for chemical and process-technical plant in science and industry describes in detail the methods used to measure basic quantities. Most prominent are modern measuring techniques by means of ultrasound, microwaves and the Coriolis effect. Alongside physical and measuring technique fundamentals, the practical applications of measuring devices are described. Calculation examples are given to illustrate the subject matter. The book addresses students of physical engineering, process engineering and environmental engineering at technical schools as well as engineers of other disciplines wishing to familiarize themselves with the subject of process measurement techniques. (orig.) [German] Diese Einfuehrung in die Messtechnik fuer chemische und verfahrens-technische Forschungs- und Produktionsanlagen beschreibt ausfuehrlich die Methoden zur Messung der Basisgroessen. Moderne Messverfahren mit Ultraschall, Mikrowellen und Coriolis-Effekt stehen dabei im Vordergrund. Beruecksichtigung finden sowohl die physikalischen und messtechnischen Grundlagen als auch die praktischen Anwendungen der Geraete. Berechnungsbeispiele dienen der Erlaeuterung und Vertiefung des Stoffes. Angesprochen sind Studenten der Ingenieurstufengaenge Physikalische Technik und Verfahrens- und Umwelttechnik an Fachhochschulen als auch Ingenieure anderer Fachrichtungen, die sich in das Gebiet der Prozessmesstechnik einarbeiten wollen. (orig.)

  12. Laser processing of materials

    Indian Academy of Sciences (India)

    J Dutta Majumdar; I Manna

    2003-06-01

    Light amplification by stimulated emission of radiation (laser) is a coherent and monochromatic beam of electromagnetic radiation that can propagate in a straight line with negligible divergence and occur in a wide range of wavelength, energy/power and beam-modes/configurations. As a result, lasers find wide applications in the mundane to the most sophisticated devices, in commercial to purely scientific purposes, and in life-saving as well as life-threatening causes. In the present contribution, we provide an overview of the application of lasers for material processing. The processes covered are broadly divided into four major categories; namely, laser-assisted forming, joining, machining and surface engineering. Apart from briefly introducing the fundamentals of these operations, we present an updated review of the relevant literature to highlight the recent advances and open questions. We begin our discussion with the general applications of lasers, fundamentals of laser-matter interaction and classification of laser material processing. A major part of the discussion focuses on laser surface engineering that has attracted a good deal of attention from the scientific community for its technological significance and scientific challenges. In this regard, a special mention is made about laser surface vitrification or amorphization that remains a very attractive but unaccomplished proposition.

  13. Advanced microwave processing concepts

    Energy Technology Data Exchange (ETDEWEB)

    Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    The purpose of this work is to explore the feasibility of several advanced microwave processing concepts to develop new energy-efficient materials and processes. The project includes two tasks: (1) commercialization of the variable-frequency microwave furnace; and (2) microwave curing of polymeric materials. The variable frequency microwave furnace, whose initial conception and design was funded by the AIM Materials Program, allows the authors, for the first time, to conduct microwave processing studies over a wide frequency range. This novel design uses a high-power traveling wave tube (TWT) originally developed for electronic warfare. By using this microwave source, one can not only select individual microwave frequencies for particular experiments, but also achieve uniform power densities over a large area by the superposition of many different frequencies. Microwave curing of various thermoset resins will be studied because it holds the potential of in-situ curing of continuous-fiber composites for strong, lightweight components or in-situ curing of adhesives, including metal-to-metal. Microwave heating can shorten curing times, provided issues of scaleup, uniformity, and thermal management can be adequately addressed.

  14. Advanced microwave processing concepts

    Energy Technology Data Exchange (ETDEWEB)

    Lauf, R.J.; McMillan, A.D.; Paulauskas, F.L. [Oak Ridge National Laboratory, TN (United States)

    1995-05-01

    The purpose of this work is to explore the feasibility of several advanced microwave processing concepts to develop new energy-efficient materials and processes. The project includes two tasks: (1) commercialization of the variable-frequency microwave furnace; and (2) microwave curing of polymer composites. The variable frequency microwave furnace, whose initial conception and design was funded by the AIC Materials Program, will allow us, for the first time, to conduct microwave processing studies over a wide frequency range. This novel design uses a high-power traveling wave tube (TWT) originally developed for electronic warfare. By using this microwave source, one can not only select individual microwave frequencies for particular experiments, but also achieve uniform power densities over a large area by the superposition of many different frequencies. Microwave curing of thermoset resins will be studied because it hold the potential of in-situ curing of continuous-fiber composites for strong, lightweight components. Microwave heating can shorten curing times, provided issues of scaleup, uniformity, and thermal management can be adequately addressed.

  15. Spacelab Ground Processing

    Science.gov (United States)

    Scully, Edward J.; Gaskins, Roger B.

    1982-02-01

    Spacelab (SL) ground processing is active at the Kennedy Space Center (KSC). The palletized payload for the second Shuttle launch is staged and integrated with interface verification active. The SL Engineering Model is being assembled for subsequent test and checkout activities. After delivery of SL flight elements from Europe, prelaunch operations for the first SL flight start with receipt of the flight experiment packages and staging of the SL hardware. Experiment operations consist of integrating the various experiment elements into the SL racks, floors and pallets. Rack and floor assemblies with the experiments installed, are integrated into the flight module. Aft end-cone installation, pallet connections, and SL subsystems interface verifications are accomplished, and SL-Orbiter interfaces verified. The Spacelab cargo is then transferred to the Orbiter Processing Facility (OPF) in a controlled environment using a canister/transporter. After the SL is installed into the Orbiter payload bay, physical and functional integrity of all payload-to-Orbiter interfaces are verified and final close-out operations conducted. Spacelab payload activities at the launch pad are minimal with the payload bay doors remaining closed. Limited access is available to the module through the Spacelab Transfer Tunnel. After mission completion, the SL is removed from the Orbiter in the OPF and returned to the SL processing facility for experiment equipment removal and reconfiguration for the subsequent mission.

  16. Adaptive Signal Processing Testbed

    Science.gov (United States)

    Parliament, Hugh A.

    1991-09-01

    The design and implementation of a system for the acquisition, processing, and analysis of signal data is described. The initial application for the system is the development and analysis of algorithms for excision of interfering tones from direct sequence spread spectrum communication systems. The system is called the Adaptive Signal Processing Testbed (ASPT) and is an integrated hardware and software system built around the TMS320C30 chip. The hardware consists of a radio frequency data source, digital receiver, and an adaptive signal processor implemented on a Sun workstation. The software components of the ASPT consists of a number of packages including the Sun driver package; UNIX programs that support software development on the TMS320C30 boards; UNIX programs that provide the control, user interaction, and display capabilities for the data acquisition, processing, and analysis components of the ASPT; and programs that perform the ASPT functions including data acquisition, despreading, and adaptive filtering. The performance of the ASPT system is evaluated by comparing actual data rates against their desired values. A number of system limitations are identified and recommendations are made for improvements.

  17. Basic Social Processes

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, PhD, Hon. PhD

    2005-06-01

    Full Text Available The goal of grounded theory is to generate a theory that accounts for a pattern of behavior that is relevant and problematic for those involved. The goal is not voluminous description, nor clever verification. As with all grounded theory, the generation of a basic social process (BSP theory occurs around a core category. While a core category is always present in a grounded research study, a BSP may not be.BSPs are ideally suited to generation by grounded theory from qualitative research because qualitative research can pick up process through fieldwork that continues over a period of time. BSPs are a delight to discover and formulate since they give so much movement and scope to the analyst’s perception of the data. BSPs such as cultivating, defaulting, centering, highlighting or becoming, give the feeling of process, change and movement over time. They also have clear, amazing general implications; so much so, that it is hard to contain them within the confines of a single substantive study. The tendency is to refer to them as a formal theory without the necessary comparative development of formal theory. They are labeled by a “gerund”(“ing” which both stimulates their generation and the tendency to over-generalize them.

  18. Processing of lateritic ores

    Energy Technology Data Exchange (ETDEWEB)

    Collier, D.E.; Ring, R.J. [Environment Division, Australian Nuclear Science and Technology Organisation, Menai, New South Wales (Australia); McGill, J.; Russell, H. [Energy Resources of Australia Ltd., Ranger Mine, Jabiru, Northern Territory (Australia)

    2000-07-01

    Highly weathered or lateritic ores that contain high proportions of fine clay minerals present specific problems when they are processed to extract uranium. Of perhaps the greatest significance is the potential of the fine minerals to adsorb dissolved uranium (preg-robbing) from leach liquors produced by processing laterites or blends of laterite and primary ores. These losses can amount to 25% of the readily soluble uranium. The clay components can also restrict practical slurry densities to relatively low values in order to avoid rheology problems in pumping and agitation. The fine fractions also contribute to relatively poor solid-liquid separation characteristics in settling and/or filtration. Studies at ANSTO have characterised the minerals believed to be responsible for these problems and quantified the effects of the fines in these types of ores. Processing strategies were also examined, including roasting, resin-in-leach and separate leaching of the laterite fines to overcome potential problems. The incorporation of the preferred treatment option into an existing mill circuit is discussed. (author)

  19. RACORO aerosol data processing

    Energy Technology Data Exchange (ETDEWEB)

    Elisabeth Andrews

    2011-10-31

    The RACORO aerosol data (cloud condensation nuclei (CCN), condensation nuclei (CN) and aerosol size distributions) need further processing to be useful for model evaluation (e.g., GCM droplet nucleation parameterizations) and other investigations. These tasks include: (1) Identification and flagging of 'splash' contaminated Twin Otter aerosol data. (2) Calculation of actual supersaturation (SS) values in the two CCN columns flown on the Twin Otter. (3) Interpolation of CCN spectra from SGP and Twin Otter to 0.2% SS. (4) Process data for spatial variability studies. (5) Provide calculated light scattering from measured aerosol size distributions. Below we first briefly describe the measurements and then describe the results of several data processing tasks that which have been completed, paving the way for the scientific analyses for which the campaign was designed. The end result of this research will be several aerosol data sets which can be used to achieve some of the goals of the RACORO mission including the enhanced understanding of cloud-aerosol interactions and improved cloud simulations in climate models.

  20. A Repeatable Collaboration Process for Exploring Business Process Improvement Alternatives

    NARCIS (Netherlands)

    Sol, H G; Amiyo, Mercy; Nabukenya, J.

    2012-01-01

    The dynamic nature of organisations has increased demand for business process agility leading to the adoption of continuous Business Process Improvement (BPI). Success of BPI projects calls for continuous process analysis and exploration of several improvement alternatives. These activities are

  1. Use of sodium salt electrolysis in the process of continuous modification of eutectic EN AC-AlSi12 alloy

    Indian Academy of Sciences (India)

    J Pezda; A Białobrzeski

    2015-04-01

    This paper presents test results concerning the selection of sodium salt for the technology of continuous modification of the EN AC-AlSi12 alloy, which is based on electrolysis of sodium salts, occurring directly in a crucible with liquid alloy. Sodium ions formed as a result of the sodium salt dissociation and the electrolysis are 'transferred' through walls of the retort made of solid electrolyte. Upon contact with the liquid alloy, which functions as a cathode, sodium ions are transformed into the atomic state, modifying the alloy. As a measure of the alloy modification extent, the obtained increase of the tensile strength m and change of metallographic structure are used, confirming obtained modification effect of the investigated alloy.

  2. Approximate simulation of Hawkes processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    2006-01-01

    Hawkes processes are important in point process theory and its applications, and simulation of such processes are often needed for various statistical purposes. This article concerns a simulation algorithm for unmarked and marked Hawkes processes, exploiting that the process can be constructed...

  3. CONVERGENCE TO PROCESS ORGANIZATION BY MODEL OF PROCESS MATURITY

    Directory of Open Access Journals (Sweden)

    Blaženka Piuković Babičković

    2015-06-01

    Full Text Available With modern business process orientation binds primarily, process of thinking and process organizational structure. Although the business processes are increasingly a matter of writing and speaking, it is a major problem among the business world, especially in countries in transition, where it has been found that there is a lack of understanding of the concept of business process management. The aim of this paper is to give a specific contribution to overcoming the identified problem, by pointing out the significance of the concept of business process management, as well as the representation of the model for review of process maturity and tools that are recommended for use in process management.

  4. Time processing in dyscalculia

    Directory of Open Access Journals (Sweden)

    marinella eCappelletti

    2011-12-01

    Full Text Available To test whether atypical number development may affect other types of quantity processing, we investigated temporal discrimination in adults with developmental dyscalculia (DD. This also allowed us to test whether (1 number and time may be sub-served by a common quantity system or decision mechanisms –in which case they may both be impaired, or (2 whether number and time are distinct –and therefore they may dissociate. Participants judged which of two successively presented horizontal lines was longer in duration, the first line being preceded by either a small or a large number prime (‘1’ or ‘9’ or by a neutral symbol (‘#’, or in third task decide which of two Arabic numbers (either ‘1’, ‘5’, ’9’ lasted longer. Results showed that (i DD’s temporal discriminability was normal as long as numbers were not part of the experimental design even as task-irrelevant stimuli; however (ii task-irrelevant numbers dramatically disrupted DD’s temporal discriminability, the more their salience increased, though the actual magnitude of the numbers had no effect; and in contrast (iii controls’ time perception was robust to the presence of numbers but modulated by numerical quantity such that small number primes or numerical stimuli made durations appear shorter than veridical and the opposite for larger numerical prime or numerical stimuli. This study is the first to investigate continuous quantity as time in a population with a congenital number impairment and to show that atypical development of numerical competence leaves continuous quantity processing spared. Our data support the idea of a partially shared quantity system across numerical and temporal dimensions, which allows dissociations and interactions among dimensions; furthermore, they suggest that impaired number in DD is unlikely to originate from systems initially dedicated to continuous quantity processing like time.

  5. Stone dusting process advance

    Energy Technology Data Exchange (ETDEWEB)

    Matt Ryan; David Humphreys [Mining Attachments (Qld.) Pty Ltd. (Australia)

    2009-01-15

    The coal mining industry has, for many years, used dry stone dust or calcium carbonate (CaCO{sub 3}) in the prevention of the propagation of coal dust explosions throughout their underground mines in Australia. In the last decade wet stone dusting has been introduced. This is where stone dust and water are mixed together to form a paste like slurry. This mixture is pumped and sprayed on to the underground roadway surfaces. This method solved the contamination of the intake airways but brought with it a new problem known as 'caking'. Caking is the hardened layer that is formed as the stone dust slurry dries. It was proven that this hardened layer compromises the dispersal characteristics of the stone dust and therefore its ability to suppress a coal dust explosion. This project set out to prove a specially formulated, non toxic slurry additive and process that could overcome the caking effect. The slurry additive process combines dry stone dust with water to form a slurry. The slurry is then treated with the additive and compressed air to create a highly vesicular foam like stone dusted surface. The initial testing on a range of additives and the effectiveness in minimising the caking effect of wet dusting were performed at Applied Chemical's research laboratory in Melbourne, Victoria and independently tested at the SGS laboratory in Paget, Queensland. The results from these tests provided the platform to conduct full scale spraying trials at the Queensland Mines Rescue Station and Caledon Coal's Cook Colliery, Blackwater. The project moved into the final stage of completion with the collection of data. The intent was to compare the slurry additive process to dry stone dusting in full-scale methane explosions at the CSIR Kloppersbos explosion facility in Kloppersbos, South Africa.

  6. Discovery as a process

    Energy Technology Data Exchange (ETDEWEB)

    Loehle, C.

    1994-05-01

    The three great myths, which form a sort of triumvirate of misunderstanding, are the Eureka! myth, the hypothesis myth, and the measurement myth. These myths are prevalent among scientists as well as among observers of science. The Eureka! myth asserts that discovery occurs as a flash of insight, and as such is not subject to investigation. This leads to the perception that discovery or deriving a hypothesis is a moment or event rather than a process. Events are singular and not subject to description. The hypothesis myth asserts that proper science is motivated by testing hypotheses, and that if something is not experimentally testable then it is not scientific. This myth leads to absurd posturing by some workers conducting empirical descriptive studies, who dress up their study with a ``hypothesis`` to obtain funding or get it published. Methods papers are often rejected because they do not address a specific scientific problem. The fact is that many of the great breakthroughs in silence involve methods and not hypotheses or arise from largely descriptive studies. Those captured by this myth also try to block funding for those developing methods. The third myth is the measurement myth, which holds that determining what to measure is straightforward, so one doesn`t need a lot of introspection to do science. As one ecologist put it to me ``Don`t give me any of that philosophy junk, just let me out in the field. I know what to measure.`` These myths lead to difficulties for scientists who must face peer review to obtain funding and to get published. These myths also inhibit the study of science as a process. Finally, these myths inhibit creativity and suppress innovation. In this paper I first explore these myths in more detail and then propose a new model of discovery that opens the supposedly miraculous process of discovery to doser scrutiny.

  7. Solar Flares: Magnetohydrodynamic Processes

    Directory of Open Access Journals (Sweden)

    Kazunari Shibata

    2011-12-01

    Full Text Available This paper outlines the current understanding of solar flares, mainly focused on magnetohydrodynamic (MHD processes responsible for producing a flare. Observations show that flares are one of the most explosive phenomena in the atmosphere of the Sun, releasing a huge amount of energy up to about 10^32 erg on the timescale of hours. Flares involve the heating of plasma, mass ejection, and particle acceleration that generates high-energy particles. The key physical processes for producing a flare are: the emergence of magnetic field from the solar interior to the solar atmosphere (flux emergence, local enhancement of electric current in the corona (formation of a current sheet, and rapid dissipation of electric current (magnetic reconnection that causes shock heating, mass ejection, and particle acceleration. The evolution toward the onset of a flare is rather quasi-static when free energy is accumulated in the form of coronal electric current (field-aligned current, more precisely, while the dissipation of coronal current proceeds rapidly, producing various dynamic events that affect lower atmospheres such as the chromosphere and photosphere. Flares manifest such rapid dissipation of coronal current, and their theoretical modeling has been developed in accordance with observations, in which numerical simulations proved to be a strong tool reproducing the time-dependent, nonlinear evolution of a flare. We review the models proposed to explain the physical mechanism of flares, giving an comprehensive explanation of the key processes mentioned above. We start with basic properties of flares, then go into the details of energy build-up, release and transport in flares where magnetic reconnection works as the central engine to produce a flare.

  8. Food Processing Antioxidants.

    Science.gov (United States)

    Hidalgo, F J; Zamora, R

    Food processing has been carried out since ancient times as a way to preserve and improve food nutritional and organoleptic properties. Although it has some undesirable consequences, such as the losses of some nutrients and the potential formation of toxic compounds, a wide range of benefits can be enumerated. Among them, the increased total antioxidant capacity of many processed foods has been known for long. This consequence has been related to both the release or increased availability of natural antioxidants and the de novo formation of substances with antioxidant properties as a consequence of the produced reactions. This review analyzes the chemical changes produced in foods during processing with special emphasis on the formation of antioxidants as a consequence of carbonyl-amine reactions produced by both carbohydrate- and lipid-derived reactive carbonyls. It discusses the lastest advances produced in the characterization of carbonyl-amine adducts and their potential action as primary (free radical scavengers), secondary (chelating and other ways to prevent lipid oxidation), and tertiary (carbonyl scavengers as a way to avoid lipid oxidation consequences) antioxidants. Moreover, the possibility of combining amino compounds with different hydrophobicity, such as aminophospholipids and proteins, with a wide array of reactive carbonyls points out to the use of carbonyl-amine reactions as a new way to induce the formation of a great variety of substances with antioxidant properties and very variable hydrophilia/lipophilia. All presented results point out to carbonyl-amine reactions as an effective method to generate efficacious antioxidants that can be used in food technology. © 2017 Elsevier Inc. All rights reserved.

  9. Multivariate Statistical Process Control Process Monitoring Methods and Applications

    CERN Document Server

    Ge, Zhiqiang

    2013-01-01

      Given their key position in the process control industry, process monitoring techniques have been extensively investigated by industrial practitioners and academic control researchers. Multivariate statistical process control (MSPC) is one of the most popular data-based methods for process monitoring and is widely used in various industrial areas. Effective routines for process monitoring can help operators run industrial processes efficiently at the same time as maintaining high product quality. Multivariate Statistical Process Control reviews the developments and improvements that have been made to MSPC over the last decade, and goes on to propose a series of new MSPC-based approaches for complex process monitoring. These new methods are demonstrated in several case studies from the chemical, biological, and semiconductor industrial areas.   Control and process engineers, and academic researchers in the process monitoring, process control and fault detection and isolation (FDI) disciplines will be inter...

  10. Coupled Diffusion Processes

    Institute of Scientific and Technical Information of China (English)

    章复熹

    2004-01-01

    @@ Coupled diffusion processes (or CDP for short) model the systems of molecular motors,which attract much interest from physicists and biologists in recent years[1,2,9,14,4,7,21]. The protein moves along a filament called the track, and it is crucial that there are several inner states of the protein and the underlying chemical reaction causes transitions among different inner states,while chemical energy can be converted to mechanical energy by rachet effects[5,3,2,14,12].

  11. Digital signal processing laboratory

    CERN Document Server

    Kumar, B Preetham

    2011-01-01

    INTRODUCTION TO DIGITAL SIGNAL PROCESSING Brief Theory of DSP ConceptsProblem SolvingComputer Laboratory: Introduction to MATLAB®/SIMULINK®Hardware Laboratory: Working with Oscilloscopes, Spectrum Analyzers, Signal SourcesDigital Signal Processors (DSPs)ReferencesDISCRETE-TIME LTI SIGNALS AND SYSTEMS Brief Theory of Discrete-Time Signals and SystemsProblem SolvingComputer Laboratory: Simulation of Continuous Time and Discrete-Time Signals and Systems ReferencesTIME AND FREQUENCY ANALYSIS OF COMMUNICATION SIGNALS Brief Theory of Discrete-Time Fourier Transform (DTFT), Discrete Fourier Transform

  12. Process Analytical Chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Veltkamp, David J.(VISITORS); Doherty, Steve D.(BCO); Anderson, B B.(VISITORS); Koch, Mel (University of Washington); Bond, Leonard J.(BATTELLE (PACIFIC NW LAB)); Burgess, Lloyd W.(VISITORS); Ullman, Alan H.(UNKNOWN); Bamberger, Judith A.(BATTELLE (PACIFIC NW LAB)); Greenwood, Margaret S.(BATTELLE (PACIFIC NW LAB))

    1999-06-15

    This review of process analytical chemistry is an update to the previous review on this subject published in 1995(A2). The time period covered for this review includes publications written or published from late 1994 until early 1999, with the addition of a few classic references pointing to background information critical to an understanding of a specific topic area. These older references have been critically included as established fundamental works. New topics covered in this review not previously treated as separate subjects in past reviews include sampling systems, imaging (via optical spectroscopy), and ultrasonic analysis.

  13. Anaerobic Digestion: Process

    DEFF Research Database (Denmark)

    Angelidaki, Irini; Batstone, Damien J.

    2011-01-01

    Organic waste may degrade anaerobically in nature as well as in engineered systems. The latter is called anaerobic digestion or biogasification. Anaerobic digestion produces two main outputs: An energy-rich gas called biogas and an effluent. The effluent, which may be a solid as well as liquid...... with very little dry matter may also be called a digest. The digest should not be termed compost unless it specifically has been composted in an aerated step. This chapter describes the basic processes of anaerobic digestion. Chapter 9.5 describes the anaerobic treatment technologies, and Chapter 9...

  14. Digital signal processing

    CERN Document Server

    O'Shea, Peter; Hussain, Zahir M

    2011-01-01

    In three parts, this book contributes to the advancement of engineering education and that serves as a general reference on digital signal processing. Part I presents the basics of analog and digital signals and systems in the time and frequency domain. It covers the core topics: convolution, transforms, filters, and random signal analysis. It also treats important applications including signal detection in noise, radar range estimation for airborne targets, binary communication systems, channel estimation, banking and financial applications, and audio effects production. Part II considers sel

  15. Introduction to information processing

    CERN Document Server

    Dietel, Harvey M

    2014-01-01

    An Introduction to Information Processing provides an informal introduction to the computer field. This book introduces computer hardware, which is the actual computing equipment.Organized into three parts encompassing 12 chapters, this book begins with an overview of the evolution of personal computing and includes detailed case studies on two of the most essential personal computers for the 1980s, namely, the IBM Personal Computer and Apple's Macintosh. This text then traces the evolution of modern computing systems from the earliest mechanical calculating devices to microchips. Other chapte

  16. Computers and data processing

    CERN Document Server

    Deitel, Harvey M

    1985-01-01

    Computers and Data Processing provides information pertinent to the advances in the computer field. This book covers a variety of topics, including the computer hardware, computer programs or software, and computer applications systems.Organized into five parts encompassing 19 chapters, this book begins with an overview of some of the fundamental computing concepts. This text then explores the evolution of modern computing systems from the earliest mechanical calculating devices to microchips. Other chapters consider how computers present their results and explain the storage and retrieval of

  17. Process Principle of Information

    Institute of Scientific and Technical Information of China (English)

    张高锋; 任君

    2006-01-01

    Ⅰ.IntroductionInformation structure is the organization modelof given and New information in the course ofinformation transmission.A discourse contains avariety of information and not all the informationlisted in the discourse is necessary and useful to us.When we decode a discourse,usually,we do not needto read every word in the discourse or text but skimor scan the discourse or text to search what we thinkis important or useful to us in the discourse as quicklyas possible.Ⅱ.Process Principles of Informati...

  18. Medical image processing

    CERN Document Server

    Dougherty, Geoff

    2011-01-01

    This book is designed for end users in the field of digital imaging, who wish to update their skills and understanding with the latest techniques in image analysis. This book emphasizes the conceptual framework of image analysis and the effective use of image processing tools. It uses applications in a variety of fields to demonstrate and consolidate both specific and general concepts, and to build intuition, insight and understanding. Although the chapters are essentially self-contained they reference other chapters to form an integrated whole. Each chapter employs a pedagogical approach to e

  19. Hyperspectral image processing

    CERN Document Server

    Wang, Liguo

    2016-01-01

    Based on the authors’ research, this book introduces the main processing techniques in hyperspectral imaging. In this context, SVM-based classification, distance comparison-based endmember extraction, SVM-based spectral unmixing, spatial attraction model-based sub-pixel mapping, and MAP/POCS-based super-resolution reconstruction are discussed in depth. Readers will gain a comprehensive understanding of these cutting-edge hyperspectral imaging techniques. Researchers and graduate students in fields such as remote sensing, surveying and mapping, geosciences and information systems will benefit from this valuable resource.

  20. FHR Process Instruments

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL

    2015-01-01

    Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt is a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both