Analysis of construction accidents in Turkey and responsible parties.

Science.gov (United States)

Gürcanli, G Emre; Müngen, Uğur

2013-01-01

Construction is one of the world's biggest industry that includes jobs as diverse as building, civil engineering, demolition, renovation, repair and maintenance. Construction workers are exposed to a wide variety of hazards. This study analyzes 1,117 expert witness reports which were submitted to criminal and labour courts. These reports are from all regions of the country and cover the period 1972-2008. Accidents were classified by the consequence of the incident, time and main causes of the accident, construction type, occupation of the victim, activity at time of the accident and party responsible for the accident. Falls (54.1%), struck by thrown/falling object (12.9%), structural collapses (9.9%) and electrocutions (7.5%) rank first four places. The accidents were most likely between the hours 15:00 and 17:00 (22.6%), 10:00-12:00 (18.7%) and just after the lunchtime (9.9%). Additionally, the most common accidents were further divided into sub-types. Expert-witness assessments were used to identify the parties at fault and what acts of negligence typically lead to accidents. Nearly two thirds of the faulty and negligent acts are carried out by the employers and employees are responsible for almost one third of all cases.

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Sartor, Dale; Tschudi, William

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Benchmarking Benchmarks

NARCIS (Netherlands)

D.C. Blitz (David)

2011-01-01

textabstractBenchmarking benchmarks is a bundle of six studies that are inspired by the prevalence of benchmarking in academic finance research as well as in investment practice. Three studies examine if current benchmark asset pricing models adequately describe the cross-section of stock returns.

Experimental benchmark for piping system dynamic-response analyses

International Nuclear Information System (INIS)

1981-01-01

This paper describes the scope and status of a piping system dynamics test program. A 0.20 m(8 in.) nominal diameter test piping specimen is designed to be representative of main heat transport system piping of LMFBR plants. Particular attention is given to representing piping restraints. Applied loadings consider component-induced vibration as well as seismic excitation. The principal objective of the program is to provide a benchmark for verification of piping design methods by correlation of predicted and measured responses. Pre-test analysis results and correlation methods are discussed

Experimental benchmark for piping system dynamic response analyses

International Nuclear Information System (INIS)

Schott, G.A.; Mallett, R.H.

1981-01-01

The scope and status of a piping system dynamics test program are described. A 0.20-m nominal diameter test piping specimen is designed to be representative of main heat transport system piping of LMFBR plants. Attention is given to representing piping restraints. Applied loadings consider component-induced vibration as well as seismic excitation. The principal objective of the program is to provide a benchmark for verification of piping design methods by correlation of predicted and measured responses. Pre-test analysis results and correlation methods are discussed. 3 refs

The CMSSW benchmarking suite: Using HEP code to measure CPU performance

International Nuclear Information System (INIS)

Benelli, G

2010-01-01

The demanding computing needs of the CMS experiment require thoughtful planning and management of its computing infrastructure. A key factor in this process is the use of realistic benchmarks when assessing the computing power of the different architectures available. In recent years a discrepancy has been observed between the CPU performance estimates given by the reference benchmark for HEP computing (SPECint) and actual performances of HEP code. Making use of the CPU performance tools from the CMSSW performance suite, comparative CPU performance studies have been carried out on several architectures. A benchmarking suite has been developed and integrated in the CMSSW framework, to allow computing centers and interested third parties to benchmark architectures directly with CMSSW. The CMSSW benchmarking suite can be used out of the box, to test and compare several machines in terms of CPU performance and report with the wanted level of detail the different benchmarking scores (e.g. by processing step) and results. In this talk we describe briefly the CMSSW software performance suite, and in detail the CMSSW benchmarking suite client/server design, the performance data analysis and the available CMSSW benchmark scores. The experience in the use of HEP code for benchmarking will be discussed and CMSSW benchmark results presented.

Vver-1000 Mox core computational benchmark

International Nuclear Information System (INIS)

2006-01-01

The NEA Nuclear Science Committee has established an Expert Group that deals with the status and trends of reactor physics, fuel performance and fuel cycle issues related to disposing of weapons-grade plutonium in mixed-oxide fuel. The objectives of the group are to provide NEA member countries with up-to-date information on, and to develop consensus regarding, core and fuel cycle issues associated with burning weapons-grade plutonium in thermal water reactors (PWR, BWR, VVER-1000, CANDU) and fast reactors (BN-600). These issues concern core physics, fuel performance and reliability, and the capability and flexibility of thermal water reactors and fast reactors to dispose of weapons-grade plutonium in standard fuel cycles. The activities of the NEA Expert Group on Reactor-based Plutonium Disposition are carried out in close co-operation (jointly, in most cases) with the NEA Working Party on Scientific Issues in Reactor Systems (WPRS). A prominent part of these activities include benchmark studies. At the time of preparation of this report, the following benchmarks were completed or in progress: VENUS-2 MOX Core Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); VVER-1000 LEU and MOX Benchmark (completed); KRITZ-2 Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); Hollow and Solid MOX Fuel Behaviour Benchmark (completed); PRIMO MOX Fuel Performance Benchmark (ongoing); VENUS-2 MOX-fuelled Reactor Dosimetry Calculation (ongoing); VVER-1000 In-core Self-powered Neutron Detector Calculational Benchmark (started); MOX Fuel Rod Behaviour in Fast Power Pulse Conditions (started); Benchmark on the VENUS Plutonium Recycling Experiments Configuration 7 (started). This report describes the detailed results of the benchmark investigating the physics of a whole VVER-1000 reactor core using two-thirds low-enriched uranium (LEU) and one-third MOX fuel. It contributes to the computer code certification process and to the

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Greenberg, Steve; Sartor, Dale

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

A Privacy-Preserving Platform for User-Centric Quantitative Benchmarking

Science.gov (United States)

Herrmann, Dominik; Scheuer, Florian; Feustel, Philipp; Nowey, Thomas; Federrath, Hannes

We propose a centralised platform for quantitative benchmarking of key performance indicators (KPI) among mutually distrustful organisations. Our platform offers users the opportunity to request an ad-hoc benchmarking for a specific KPI within a peer group of their choice. Architecture and protocol are designed to provide anonymity to its users and to hide the sensitive KPI values from other clients and the central server. To this end, we integrate user-centric peer group formation, exchangeable secure multi-party computation protocols, short-lived ephemeral key pairs as pseudonyms, and attribute certificates. We show by empirical evaluation of a prototype that the performance is acceptable for reasonably sized peer groups.

Benchmarking nuclear models for Gamow–Teller response

International Nuclear Information System (INIS)

Litvinova, E.; Brown, B.A.; Fang, D.-L.; Marketin, T.; Zegers, R.G.T.

2014-01-01

A comparative study of the nuclear Gamow–Teller response (GTR) within conceptually different state-of-the-art approaches is presented. Three nuclear microscopic models are considered: (i) the recently developed charge-exchange relativistic time blocking approximation (RTBA) based on the covariant density functional theory, (ii) the shell model (SM) with an extended “jj77” model space and (iii) the non-relativistic quasiparticle random-phase approximation (QRPA) with a Brueckner G-matrix effective interaction. We study the physics cases where two or all three of these models can be applied. The Gamow–Teller response functions are calculated for 208 Pb, 132 Sn and 78 Ni within both RTBA and QRPA. The strengths obtained for 208 Pb are compared to data that enable a firm model benchmarking. For the nucleus 132 Sn, also SM calculations are performed within the model space truncated at the level of a particle–hole (ph) coupled to vibration configurations. This allows a consistent comparison to the RTBA where ph⊗phonon coupling is responsible for the spreading width and considerable quenching of the GTR. Differences between the models and perspectives of their future developments are discussed.

Benchmarking nuclear models for Gamow–Teller response

Energy Technology Data Exchange (ETDEWEB)

Litvinova, E., E-mail: elena.litvinova@wmich.edu [Department of Physics, Western Michigan University, Kalamazoo, MI 49008-5252 (United States); National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824-1321 (United States); Brown, B.A. [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824-1321 (United States); National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824-1321 (United States); Fang, D.-L. [National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824-1321 (United States); Joint Institute for Nuclear Astrophysics, Michigan State University, East Lansing, MI 48824-1321 (United States); Marketin, T. [Physics Department, Faculty of Science, University of Zagreb (Croatia); Zegers, R.G.T. [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824-1321 (United States); National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824-1321 (United States); Joint Institute for Nuclear Astrophysics, Michigan State University, East Lansing, MI 48824-1321 (United States)

2014-03-07

A comparative study of the nuclear Gamow–Teller response (GTR) within conceptually different state-of-the-art approaches is presented. Three nuclear microscopic models are considered: (i) the recently developed charge-exchange relativistic time blocking approximation (RTBA) based on the covariant density functional theory, (ii) the shell model (SM) with an extended “jj77” model space and (iii) the non-relativistic quasiparticle random-phase approximation (QRPA) with a Brueckner G-matrix effective interaction. We study the physics cases where two or all three of these models can be applied. The Gamow–Teller response functions are calculated for {sup 208}Pb, {sup 132}Sn and {sup 78}Ni within both RTBA and QRPA. The strengths obtained for {sup 208}Pb are compared to data that enable a firm model benchmarking. For the nucleus {sup 132}Sn, also SM calculations are performed within the model space truncated at the level of a particle–hole (ph) coupled to vibration configurations. This allows a consistent comparison to the RTBA where ph⊗phonon coupling is responsible for the spreading width and considerable quenching of the GTR. Differences between the models and perspectives of their future developments are discussed.

Analyses and results of the OECD/NEA WPNCS EGUNF benchmark phase II. Technical report; Analysen und Ergebnisse zum OECD/NEA WPNCS EGUNF Benchmark Phase II. Technischer Bericht

Energy Technology Data Exchange (ETDEWEB)

Hannstein, Volker; Sommer, Fabian

2017-05-15

The report summarizes the performed studies and results in the frame of the phase II benchmarks of the expert group of used nuclear fuel (EGUNF) of the working party of nuclear criticality safety (WPNCS) of the nuclear energy agency (NEA) of the organization for economic co-operation and development (OECD). The studies specified within the benchmarks have been realized to the full extent. The scope of the benchmarks was the comparison of a generic BWR fuel element with gadolinium containing fuel rods with several computer codes and cross section libraries of different international working groups and institutions. The used computational model allows the evaluation of the accuracy of fuel rod and their influence of the inventory calculations and the respective influence on BWR burnout credit calculations.

Motivated Reasoning and Political Parties: Evidence for Increased Processing in the Face of Party Cues

DEFF Research Database (Denmark)

Petersen, Michael Bang; Skov, Martin; Serritzlew, Søren

2013-01-01

. As part of the latter processes, the presence of party cues would make individuals engage in effortful motivated reasoning to produce arguments for the correctness of their party’s position. Following psychological research, we use response latency to measure processing effort and, in support......Extant research in political science has demonstrated that citizens’ opinions on policies are influenced by their attachment to the party sponsoring them. At the same time, little evidence exists illuminating the psychological processes through which such party cues are filtered. From...... the psychological literature on source cues, we derive two possible hypotheses: (1) party cues activate heuristic processing aimed at minimizing the processing effort during opinion formation, and (2) party cues activate group motivational processes that compel citizens to support the position of their party...

Benchmarks for GADRAS performance validation

International Nuclear Information System (INIS)

Mattingly, John K.; Mitchell, Dean James; Rhykerd, Charles L. Jr.

2009-01-01

The performance of the Gamma Detector Response and Analysis Software (GADRAS) was validated by comparing GADRAS model results to experimental measurements for a series of benchmark sources. Sources for the benchmark include a plutonium metal sphere, bare and shielded in polyethylene, plutonium oxide in cans, a highly enriched uranium sphere, bare and shielded in polyethylene, a depleted uranium shell and spheres, and a natural uranium sphere. The benchmark experimental data were previously acquired and consist of careful collection of background and calibration source spectra along with the source spectra. The calibration data were fit with GADRAS to determine response functions for the detector in each experiment. A one-dimensional model (pie chart) was constructed for each source based on the dimensions of the benchmark source. The GADRAS code made a forward calculation from each model to predict the radiation spectrum for the detector used in the benchmark experiment. The comparisons between the GADRAS calculation and the experimental measurements are excellent, validating that GADRAS can correctly predict the radiation spectra for these well-defined benchmark sources.

Corruption and Local Democratization in Indonesia: The Role of Islamic Parties.

Science.gov (United States)

Henderson, J Vernon; Kuncoro, Ari

2011-03-01

Indonesia has a tradition of corruption among local officials who harass and collect bribes from firms. This paper examines whether corruption is affected by a change in institutions introducing local democratization and by party composition of local assemblies. Democratization occurred in 1999 and decentralization in 2001. We have firm-level data for 2001 and 2004. The 2001 data benchmark corruption at the time of decentralization, but for a limited sample of districts. We find that corruption declines between 2001 and 2004 overall, but much less [more] so in districts with more secular [Islamic] party representatives in district assemblies. For a larger sample of districts, correspondingly, we find that corruption in 2004 is more in districts which voted more in favor of secular party representatives in the first elections in 1999. We argue that the effects seem to be causal, over above any effects of changing religiosity and economic circumstances across districts.

Creating a new paradigm for the role of the responsible party in natural resource damage assessments

International Nuclear Information System (INIS)

Hansen, I.K.

1993-01-01

The Texas Natural Resource Trustees are conducting a negotiated rulemaking with representative from environmental groups and the oil industry. The philosophy guiding these rules, which will apply to oil spills that impact coastal waters, is that each spill is a unique circumstance. The particular spill's impact should be objectively assessed through a field investigation. Reliance solely on models or compensation tables is discouraged. The observable environmental impact is an important factor in determining the type of assessment utilized. The negotiated rules will utilize federal rules as guidance and will emphasize inclusion of the responsible party in the decision to conduct an expedited or a comprehensive assessment. The rules will establish time limits for trustee decision and completion of the assessments. The time limits, which can be waived by the Commissioner of the General Land Office, are intended to encourage rapid initiation of restoration, rehabilitation, replacement and acquisition activities. The imposition of time limits will require a new paradigm for the role of the responsible party in natural resource damage assessments. The paradigm will develop through the use of joint assessments, sharing of information, and participation of the responsible party in trustee decisions. The paper will describe a joint assessment used in a recent oil spill

VBDO Responsible Supply Chain Benchmark 2012. A comparative investigation into CSR in the supply chain of 40 multinationals

Energy Technology Data Exchange (ETDEWEB)

Bres, C.; Cotterell, P.; Kaya, R.; Verbunt, S.

2012-11-15

This benchmark is a qualitative (partly quantitative), comparative investigation among 40 Dutch publicly listed companies, aiming to inform stakeholders on responsible supply chain management. These stakeholders are company executives, investors, academia, NGOs, government and society at large. Rather than concentrate on the nature of a company's activities, this benchmark focuses on the company's supply chain governance and management thereof. This makes it possible to compare, to a reasonable degree, the responsible supply chain policies of companies across different sectors.

Movements in Parties: OccupyPD

Directory of Open Access Journals (Sweden)

Donatella della Porta

2015-03-01

Full Text Available When the United States activists called for people to Occupy#everywhere, it is unlikely they were thinking of the headquarters of the Italian centre-left party. Parties and movements are often considered to be worlds apart. In reality, parties have been relevant players in movement politics, and movements have influenced parties, often through the double militancy of many of their members. OccupyPD testifies to a continuous fluidity at the movement-party border, but also to a blockage in the party’s interactions with society that started long before the economic crisis but drastically accelerated with it. In this paper we present the OccupyPD Movement as a case of interaction between party politics and social movement politics, and in particular between the base membership of a centre-left party and the broader anti-austerity movement that diffused from the US to Europe adopting similar forms of actions and claims. Second, by locating it within the context of the economic and democratic crisis that erupted in 2007, we understand its emergence as a reaction towards politics in times of crisis of responsibility, by which we mean a drastic drop in the capacity of the government to respond to citizens’ requests. To fulfil this double aim, we bridge social movement studies with research on party change, institutional trust and democratic theory, looking at some political effects of the economic crisis in terms of a specific form of legitimacy crisis, as well as citizens’ responses to it, with a particular focus on the political meaning of recent anti-austerity protests. In this analysis, we refer to both quantitative and qualitative data from secondary liter-ature and original in-depth interviews carried out with a sample of OccupyPD activists.

Benchmarking

OpenAIRE

Meylianti S., Brigita

1999-01-01

Benchmarking has different meaning to different people. There are five types of benchmarking, namely internal benchmarking, competitive benchmarking, industry / functional benchmarking, process / generic benchmarking and collaborative benchmarking. Each type of benchmarking has its own advantages as well as disadvantages. Therefore it is important to know what kind of benchmarking is suitable to a specific application. This paper will discuss those five types of benchmarking in detail, includ...

VBDO Responsible Supply Chain Benchmark 2012. A comparative investigation into CSR in the supply chain of 40 multinationals

Energy Technology Data Exchange (ETDEWEB)

Bres, C.; Cotterell, P.; Kaya, R.; Verbunt, S.

2012-11-15

This benchmark is a qualitative (partly quantitative), comparative investigation among 40 Dutch publicly listed companies, aiming to inform stakeholders on responsible supply chain management. These stakeholders are company executives, investors, academia, NGOs, government and society at large. Rather than concentrate on the nature of a company's activities, this benchmark focuses on the company's supply chain governance and management thereof. This makes it possible to compare, to a reasonable degree, the responsible supply chain policies of companies across different sectors.

Benchmarking the interactions among barriers in third-party logistics implementation

DEFF Research Database (Denmark)

Diabat, A.; Khreishah, A.; Govindan, Kannan

2013-01-01

Purpose: The purpose of this paper is to analyze the interaction among some of the major barriers that may hinder the implementation of third-party logistics (TPL) in manufacturing industries. Design/methodology/approach: This paper uses an interpretive structural modeling (ISM) methodology...... to analyze the interactions among the barriers. Findings: It is beneficial for the management of any firm to be aware of significant barriers and to diagnose those that could be integral to the organization's future survival. Many works have focused on identifying barriers for TPL implementation, but a model...... for such barriers is lacking. This paper attempts to develop a model for the barriers using an ISM methodology and analyzes the mutual interactions among the barriers. The model differentiates between the barriers so that driving barriers, which can intensify other barriers, and dependent barriers are identified...

Subcriticality of accelerator driven system by AESJ/JAERI working party

International Nuclear Information System (INIS)

Iwasaki, Tomohiko

2002-01-01

Under Atomic Energy Society of Japan (AESJ) and Japan Atomic Energy Research Institute (JAERI), a Working Party on Reactor Physics of Accelerator-Driven System (ADS-WP) has been set since March 1999 to review and investigate special subjects related to reactor physics research of Accelerator-Driven System (ADS). In the ADS-WP, the extensive and aggressive activity is being made by 25 professional members in the field of reactor physics in Japan. The ADS is now studying three subjects related to subcriticality of ADS; (1) calculation accuracy of subcriticality on ADS, (2) critical safety issues of ADS, and (3) theoretical review of subcriticality and its measurement methods. This paper describes two topics related to the subjects (1) and (2); one is an analysis of maximum reactivity potentially inserted to a subcritical core and the other is a benchmark proposal for checking calculation accuracy of subcriticality on ADS. The full specification of the calculation benchmark will be supplied by June 2002. Researchers from overseas, especially from Korea, are welcome to join this benchmark

Party Control, Party Competition and Public Service Performance

OpenAIRE

Boyne, George Alexander; James, O.; John, P.; Petrovsky, Nicolai

2012-01-01

This article assesses party effects on the performance of public services. A policy-seeking model, hypothesizing that left and right party control affects performance, and an instrumental model, where all parties strive to raise performance, are presented. The framework also suggests a mixed model in which party effects are contingent on party competition, with parties raising performance as increasing party competition places their control of government at increasing risk. These models are t...

Corruption and Local Democratization in Indonesia: The Role of Islamic Parties1

Science.gov (United States)

Henderson, J. Vernon; Kuncoro, Ari

2013-01-01

Indonesia has a tradition of corruption among local officials who harass and collect bribes from firms. This paper examines whether corruption is affected by a change in institutions introducing local democratization and by party composition of local assemblies. Democratization occurred in 1999 and decentralization in 2001. We have firm-level data for 2001 and 2004. The 2001 data benchmark corruption at the time of decentralization, but for a limited sample of districts. We find that corruption declines between 2001 and 2004 overall, but much less [more] so in districts with more secular [Islamic] party representatives in district assemblies. For a larger sample of districts, correspondingly, we find that corruption in 2004 is more in districts which voted more in favor of secular party representatives in the first elections in 1999. We argue that the effects seem to be causal, over above any effects of changing religiosity and economic circumstances across districts. PMID:25083023

Neutronics analysis of the International Thermonuclear Experimental Reactor (ITER) MCNP ''Benchmark CAD Model'' with the ATTILA discrete ordinance code

International Nuclear Information System (INIS)

Youssef, M.Z.; Feder, R.; Davis, I.

2007-01-01

The ITER IT has adopted the newly developed FEM, 3-D, and CAD-based Discrete Ordinates code, ATTILA for the neutronics studies contingent on its success in predicting key neutronics parameters and nuclear field according to the stringent QA requirements set forth by the Management and Quality Program (MQP). ATTILA has the advantage of providing a full flux and response functions mapping everywhere in one run where components subjected to excessive radiation level and strong streaming paths can be identified. The ITER neutronics community had agreed to use a standard CAD model of ITER (40 degree sector, denoted ''Benchmark CAD Model'') to compare results for several responses selected for calculation benchmarking purposes to test the efficiency and accuracy of the CAD-MCNP approach developed by each party. Since ATTILA seems to lend itself as a powerful design tool with minimal turnaround time, it was decided to benchmark this model with ATTILA as well and compare the results to those obtained with the CAD MCNP calculations. In this paper we report such comparison for five responses, namely: (1) Neutron wall load on the surface of the 18 shield blanket module (SBM), (2) Neutron flux and nuclear heating rate in the divertor cassette, (3) nuclear heating rate in the winding pack of the inner leg of the TF coil, (4) Radial flux profile across dummy port plug and shield plug placed in the equatorial port, and (5) Flux at seven point locations situated behind the equatorial port plug. (orig.)

Party member recruitment and the representativeness of party membership

DEFF Research Database (Denmark)

Kosiara-Pedersen, Karina

Party membership figures are in decline. However, parties are still recruiting party members. Are there any differences in the social and political characteristics of old and new party members? If there is a difference, are new party members more or less representative for party voters than old...

Public Service Media Online, Advertising and the Third-Party User Data Business: A Trade versus Trust Dilemma?

DEFF Research Database (Denmark)

Sørensen, Jannick Kirk; van den Bulck, Hilde

2018-01-01

media landscape. Our analysis shows not only connections between the presence of advertisement and the number of third party servers found, but also a reflection of the different types of European media systems. To provide a benchmark for our analysis, 64 private media websites has also analysed...

World-Wide Benchmarking of ITER Nb$_{3}$Sn Strand Test Facilities

CERN Document Server

Jewell, MC; Takahashi, Yoshikazu; Shikov, Alexander; Devred, Arnaud; Vostner, Alexander; Liu, Fang; Wu, Yu; Jewell, Matthew C; Boutboul, Thierry; Bessette, Denis; Park, Soo-Hyeon; Isono, Takaaki; Vorobieva, Alexandra; Martovetsky, Nicolai; Seo, Kazutaka

2010-01-01

The world-wide procurement of Nb$_{3}$Sn and NbTi for the ITER superconducting magnet systems will involve eight to ten strand suppliers from six Domestic Agencies (DAs) on three continents. To ensure accurate and consistent measurement of the physical and superconducting properties of the composite strand, a strand test facility benchmarking effort was initiated in August 2008. The objectives of this effort are to assess and improve the superconducting strand test and sample preparation technologies at each DA and supplier, in preparation for the more than ten thousand samples that will be tested during ITER procurement. The present benchmarking includes tests for critical current (I-c), n-index, hysteresis loss (Q(hys)), residual resistivity ratio (RRR), strand diameter, Cu fraction, twist pitch, twist direction, and metal plating thickness (Cr or Ni). Nineteen participants from six parties (China, EU, Japan, South Korea, Russia, and the United States) have participated in the benchmarking. This round, cond...

Terrorism and Political Parties

DEFF Research Database (Denmark)

Bourne, Angela

In the paper I address the empirical puzzle arising from different responses by political authorities in Spain and the UK to the existence of political parties integrated in the terrorist groups Euskadi Ta Askatasuna (ETA, Basque Homeland and Freedom) and the Irish Republican Army (IRA). More...... for realization of free speech rights and representation is also emphasized, and where proscription is seen as inimical to resolution of conflict underpinning violence. In the context of party competition, a winning coalition is required for one discourse to predominate. However, I also argued that both ideas...

ZZ WPPR-FR-MOX/BNCMK, Benchmark on Pu Burner Fast Reactor

International Nuclear Information System (INIS)

Garnier, J.C.; Ikegami, T.

1993-01-01

Description of program or function: In order to intercompare the characteristics of the different reactors considered for Pu recycling, in terms of neutron economy, minor actinide production, uranium content versus Pu burning, the NSC Working Party on Physics of Plutonium Recycling (WPPR) is setting up several benchmark studies. They cover in particular the case of the evolution of the Pu quality and Pu fissile content for Pu recycling in PWRs; the void coefficient in PWRs partly fuelled with MOX versus Pu content; the physics characteristics of non-standard fast reactors with breeding ratios around 0.5. The following benchmarks are considered here: - Fast reactors: Pu Burner MOX fuel, Pu Burner metal fuel; - PWRs: MOX recycling (bad quality Pu), Multiple MOX recycling

DEVELOPMENT OF POLITICAL PARTIES AND PARTY FUNDING: MODELS AND CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Hrvoje MATAKOVIC

2015-03-01

Full Text Available The first modern political parties were formed at the end of the 18th century and have, from those times up to now, undergone 4 developing phases; each of the phases is bound to ideal-type political party model: cadre parties, mass parties, catch-all parties and cartel parties. Each of these party models differentiates in various characteristics: party foundation, number of members, and way of leading the election campaigns, but also in ways of financing. This paper describes the above mentioned 4 phases of political parties’ development and 4 phases of parties' finances development; it will be analysed in detail positive and negative sides of each of the models of party financing.

The Institutionalisation of the Romanian Party System

Directory of Open Access Journals (Sweden)

Clara Volintiru

2012-12-01

Full Text Available This paper explores the level of institutionalisation achieved by the Romanian political system since transitioning to democracy. Following through the key components of an institutionalised party system, the inquiry looks at the stability of interparty competition in Romania and the depth of its parties’ roots in society. These components are measured through such indicators as electoral volatility or the cohesiveness of the ideological preferences. Their levels suggest that the Romanian party system isn’t fully instituionalised, with fluctuating volatility and a rather incohesive ideological positioning of both voters and parties. This paper argues that in response to the double challenge of poor institutionalisation of the political parties and the party system as a whole, informal remedies, such as patronage of public jobs, or proprietary use of state resources, become highly attractive solutions for electoral success.

A framework for benchmarking land models

Directory of Open Access Journals (Sweden)

Y. Q. Luo

2012-10-01

Full Text Available Land models, which have been developed by the modeling community in the past few decades to predict future states of ecosystems and climate, have to be critically evaluated for their performance skills of simulating ecosystem responses and feedback to climate change. Benchmarking is an emerging procedure to measure performance of models against a set of defined standards. This paper proposes a benchmarking framework for evaluation of land model performances and, meanwhile, highlights major challenges at this infant stage of benchmark analysis. The framework includes (1 targeted aspects of model performance to be evaluated, (2 a set of benchmarks as defined references to test model performance, (3 metrics to measure and compare performance skills among models so as to identify model strengths and deficiencies, and (4 model improvement. Land models are required to simulate exchange of water, energy, carbon and sometimes other trace gases between the atmosphere and land surface, and should be evaluated for their simulations of biophysical processes, biogeochemical cycles, and vegetation dynamics in response to climate change across broad temporal and spatial scales. Thus, one major challenge is to select and define a limited number of benchmarks to effectively evaluate land model performance. The second challenge is to develop metrics of measuring mismatches between models and benchmarks. The metrics may include (1 a priori thresholds of acceptable model performance and (2 a scoring system to combine data–model mismatches for various processes at different temporal and spatial scales. The benchmark analyses should identify clues of weak model performance to guide future development, thus enabling improved predictions of future states of ecosystems and climate. The near-future research effort should be on development of a set of widely acceptable benchmarks that can be used to objectively, effectively, and reliably evaluate fundamental properties

Impact testing and analysis for structural code benchmarking

International Nuclear Information System (INIS)

Glass, R.E.

1989-01-01

Sandia National Laboratories, in cooperation with industry and other national laboratories, has been benchmarking computer codes (''Structural Code Benchmarking for the Analysis of Impact Response of Nuclear Material Shipping Cask,'' R.E. Glass, Sandia National Laboratories, 1985; ''Sample Problem Manual for Benchmarking of Cask Analysis Codes,'' R.E. Glass, Sandia National Laboratories, 1988; ''Standard Thermal Problem Set for the Evaluation of Heat Transfer Codes Used in the Assessment of Transportation Packages, R.E. Glass, et al., Sandia National Laboratories, 1988) used to predict the structural, thermal, criticality, and shielding behavior of radioactive materials packages. The first step in the benchmarking of the codes was to develop standard problem sets and to compare the results from several codes and users. This step for structural analysis codes has been completed as described in ''Structural Code Benchmarking for the Analysis of Impact Response of Nuclear Material Shipping Casks,'' R.E. Glass, Sandia National Laboratories, 1985. The problem set is shown in Fig. 1. This problem set exercised the ability of the codes to predict the response to end (axisymmetric) and side (plane strain) impacts with both elastic and elastic/plastic materials. The results from these problems showed that there is good agreement in predicting elastic response. Significant differences occurred in predicting strains for the elastic/plastic models. An example of the variation in predicting plastic behavior is given, which shows the hoop strain as a function of time at the impacting end of Model B. These differences in predicting plastic strains demonstrated a need for benchmark data for a cask-like problem. 6 refs., 5 figs

Nationalism, territory and extremism in party politics

DEFF Research Database (Denmark)

Bourne, Angela

In the paper I address the empirical puzzle arising from different responses by political authorities in Spain and the UK to the existence of political parties integrated in the terrorist groups Euskadi Ta Askatasuna (ETA, Basque Homeland and Freedom) and the Irish Republican Army. More specifica......In the paper I address the empirical puzzle arising from different responses by political authorities in Spain and the UK to the existence of political parties integrated in the terrorist groups Euskadi Ta Askatasuna (ETA, Basque Homeland and Freedom) and the Irish Republican Army. More...... for realization of free speech rights and representation is also emphasized, and where proscription is seen as inimical to resolution of conflict underpinning violence. In the context of party competition, a winning coalition is required for one discourse to predominate. However, I also argued that both ideas...

Circuit parties.

Science.gov (United States)

Guzman, R

2000-03-01

Circuit parties are extended celebrations, lasting from a day to a week, primarily attended by gay and bisexual men in their thirties and forties. These large-scale dance parties move from city to city and draw thousands of participants. The risks for contracting HIV during these parties include recreational drug use and unsafe sex. Limited data exists on the level of risk at these parties, and participants are skeptical of outside help because of past criticism of these events. Health care and HIV advocates can promote risk-reduction strategies with the cooperation of party planners and can counsel individuals to personally reduce their own risk. To convey the message, HIV prevention workers should emphasize positive and community-centered aspects of the parties, such as taking care of friends and avoiding overdose.

Danish Party Membership

DEFF Research Database (Denmark)

Kosiara-Pedersen, Karina

Political parties have as their main assignment the creation of linkage between citizens and government. They provide one of several channels of participation in modern democracies. Yet, the general trend across the Western world is that party membership figures decline. The purpose of this article...... is to report on the state of Danish party membership; the numbers and participation. The claim of the article is that total membership figures hide evidence of membership renewal and increases, and that mere party membership figures are insufficient when evaluating political parties as channels...... of participation. Instead, membership figures at party level as well as the participation of party members need to be taken into account in order to assess parties as channels of participation. This is supported by the analyses reported here which show that even though membership figures are declining, parties...

Dynamic benchmarking of simulation codes

International Nuclear Information System (INIS)

Henry, R.E.; Paik, C.Y.; Hauser, G.M.

1996-01-01

Computer simulation of nuclear power plant response can be a full-scope control room simulator, an engineering simulator to represent the general behavior of the plant under normal and abnormal conditions, or the modeling of the plant response to conditions that would eventually lead to core damage. In any of these, the underlying foundation for their use in analysing situations, training of vendor/utility personnel, etc. is how well they represent what has been known from industrial experience, large integral experiments and separate effects tests. Typically, simulation codes are benchmarked with some of these; the level of agreement necessary being dependent upon the ultimate use of the simulation tool. However, these analytical models are computer codes, and as a result, the capabilities are continually enhanced, errors are corrected, new situations are imposed on the code that are outside of the original design basis, etc. Consequently, there is a continual need to assure that the benchmarks with important transients are preserved as the computer code evolves. Retention of this benchmarking capability is essential to develop trust in the computer code. Given the evolving world of computer codes, how is this retention of benchmarking capabilities accomplished? For the MAAP4 codes this capability is accomplished through a 'dynamic benchmarking' feature embedded in the source code. In particular, a set of dynamic benchmarks are included in the source code and these are exercised every time the archive codes are upgraded and distributed to the MAAP users. Three different types of dynamic benchmarks are used: plant transients; large integral experiments; and separate effects tests. Each of these is performed in a different manner. The first is accomplished by developing a parameter file for the plant modeled and an input deck to describe the sequence; i.e. the entire MAAP4 code is exercised. The pertinent plant data is included in the source code and the computer

Nonparametric estimation of benchmark doses in environmental risk assessment

Science.gov (United States)

Piegorsch, Walter W.; Xiong, Hui; Bhattacharya, Rabi N.; Lin, Lizhen

2013-01-01

Summary An important statistical objective in environmental risk analysis is estimation of minimum exposure levels, called benchmark doses (BMDs), that induce a pre-specified benchmark response in a dose-response experiment. In such settings, representations of the risk are traditionally based on a parametric dose-response model. It is a well-known concern, however, that if the chosen parametric form is misspecified, inaccurate and possibly unsafe low-dose inferences can result. We apply a nonparametric approach for calculating benchmark doses, based on an isotonic regression method for dose-response estimation with quantal-response data (Bhattacharya and Kong, 2007). We determine the large-sample properties of the estimator, develop bootstrap-based confidence limits on the BMDs, and explore the confidence limits’ small-sample properties via a short simulation study. An example from cancer risk assessment illustrates the calculations. PMID:23914133

Ionospheric Response to Extremes in the Space Environment: Establishing Benchmarks for the Space Weather Action Plan.

Science.gov (United States)

Viereck, R. A.; Azeem, S. I.

2017-12-01

One of the goals of the National Space Weather Action Plan is to establish extreme event benchmarks. These benchmarks are estimates of environmental parameters that impact technologies and systems during extreme space weather events. Quantitative assessment of anticipated conditions during these extreme space weather event will enable operators and users of affected technologies to develop plans for mitigating space weather risks and improve preparedness. The ionosphere is one of the most important regions of space because so many applications either depend on ionospheric space weather for their operation (HF communication, over-the-horizon radars), or can be deleteriously affected by ionospheric conditions (e.g. GNSS navigation and timing, UHF satellite communications, synthetic aperture radar, HF communications). Since the processes that influence the ionosphere vary over time scales from seconds to years, it continues to be a challenge to adequately predict its behavior in many circumstances. Estimates with large uncertainties, in excess of 100%, may result in operators of impacted technologies over or under preparing for such events. The goal of the next phase of the benchmarking activity is to reduce these uncertainties. In this presentation, we will focus on the sources of uncertainty in the ionospheric response to extreme geomagnetic storms. We will then discuss various research efforts required to better understand the underlying processes of ionospheric variability and how the uncertainties in ionospheric response to extreme space weather could be reduced and the estimates improved.

Party Animals or Responsible Men: Social Class, Race, and Masculinity on Campus

Science.gov (United States)

Sweeney, Brian

2014-01-01

Studies of collegiate party and hookup culture tend to overlook variation along social class and racial/ethnic lines. Drawing on interview data at a "party school" in the Midwest, I examine the meanings and practices of drinking and casual sex for a group of class and race-diverse fraternity men. While more privileged men draw on ideas…

MOx Depletion Calculation Benchmark

International Nuclear Information System (INIS)

San Felice, Laurence; Eschbach, Romain; Dewi Syarifah, Ratna; Maryam, Seif-Eddine; Hesketh, Kevin

2016-01-01

Under the auspices of the NEA Nuclear Science Committee (NSC), the Working Party on Scientific Issues of Reactor Systems (WPRS) has been established to study the reactor physics, fuel performance, radiation transport and shielding, and the uncertainties associated with modelling of these phenomena in present and future nuclear power systems. The WPRS has different expert groups to cover a wide range of scientific issues in these fields. The Expert Group on Reactor Physics and Advanced Nuclear Systems (EGRPANS) was created in 2011 to perform specific tasks associated with reactor physics aspects of present and future nuclear power systems. EGRPANS provides expert advice to the WPRS and the nuclear community on the development needs (data and methods, validation experiments, scenario studies) for different reactor systems and also provides specific technical information regarding: core reactivity characteristics, including fuel depletion effects; core power/flux distributions; Core dynamics and reactivity control. In 2013 EGRPANS published a report that investigated fuel depletion effects in a Pressurised Water Reactor (PWR). This was entitled 'International Comparison of a Depletion Calculation Benchmark on Fuel Cycle Issues' NEA/NSC/DOC(2013) that documented a benchmark exercise for UO 2 fuel rods. This report documents a complementary benchmark exercise that focused on PuO 2 /UO 2 Mixed Oxide (MOX) fuel rods. The results are especially relevant to the back-end of the fuel cycle, including irradiated fuel transport, reprocessing, interim storage and waste repository. Saint-Laurent B1 (SLB1) was the first French reactor to use MOx assemblies. SLB1 is a 900 MWe PWR, with 30% MOx fuel loading. The standard MOx assemblies, used in Saint-Laurent B1 reactor, include three zones with different plutonium enrichments, high Pu content (5.64%) in the center zone, medium Pu content (4.42%) in the intermediate zone and low Pu content (2.91%) in the peripheral zone

Authentication method for authenticating a first party to a second party

NARCIS (Netherlands)

2014-01-01

An authentication system and method is presented for authenticating a first party to a second party, where an operation is performed on condition that the authentication succeeds. The authentication method verifies whether the first party is authenticated. If the first party is not authenticated,

Impact testing and analysis for structural code benchmarking

International Nuclear Information System (INIS)

Glass, R.E.

1989-01-01

Sandia National Laboratories, in cooperation with industry and other national laboratories, has been benchmarking computer codes used to predict the structural, thermal, criticality, and shielding behavior of radioactive materials packages. The first step in the benchmarking of the codes was to develop standard problem sets and to compare the results from several codes and users. This step for structural analysis codes has been completed as described in Structural Code Benchmarking for the Analysis of Impact Response of Nuclear Material Shipping Casks, R.E. Glass, Sandia National Laboratories, 1985. The problem set is shown in Fig. 1. This problem set exercised the ability of the codes to predict the response to end (axisymmetric) and side (plane strain) impacts with both elastic and elastic/plastic materials. The results from these problems showed that there is good agreement in predicting elastic response. Significant differences occurred in predicting strains for the elastic/plastic models. An example of the variation in predicting plastic behavior is given, which shows the hoop strain as a function of time at the impacting end of Model B. These differences in predicting plastic strains demonstrated a need for benchmark data for a cask-like problem

Surveys and Benchmarks

Science.gov (United States)

Bers, Trudy

2012-01-01

Surveys and benchmarks continue to grow in importance for community colleges in response to several factors. One is the press for accountability, that is, for colleges to report the outcomes of their programs and services to demonstrate their quality and prudent use of resources, primarily to external constituents and governing boards at the state…

International Benchmark on Numerical Simulations for 1D, Nonlinear Site Response (PRENOLIN) : Verification Phase Based on Canonical Cases

NARCIS (Netherlands)

Régnier, Julie; Bonilla, Luis-Fabian; Bard, Pierre-Yves; Bertrand, Etienne; Hollender, Fabrice; Kawase, Hiroshi; Sicilia, Deborah; Arduino, Pedro; Amorosi, Angelo; Asimaki, Dominiki; Pisano, F.

2016-01-01

PREdiction of NOn‐LINear soil behavior (PRENOLIN) is an international benchmark aiming to test multiple numerical simulation codes that are capable of predicting nonlinear seismic site response with various constitutive models. One of the objectives of this project is the assessment of the

Looking Past Primary Productivity: Benchmarking System Processes that Drive Ecosystem Level Responses in Models

Science.gov (United States)

Cowdery, E.; Dietze, M.

2017-12-01

As atmospheric levels of carbon dioxide levels continue to increase, it is critical that terrestrial ecosystem models can accurately predict ecological responses to the changing environment. Current predictions of net primary productivity (NPP) in response to elevated atmospheric CO2 concentration are highly variable and contain a considerable amount of uncertainty. Benchmarking model predictions against data are necessary to assess their ability to replicate observed patterns, but also to identify and evaluate the assumptions causing inter-model differences. We have implemented a novel benchmarking workflow as part of the Predictive Ecosystem Analyzer (PEcAn) that is automated, repeatable, and generalized to incorporate different sites and ecological models. Building on the recent Free-Air CO2 Enrichment Model Data Synthesis (FACE-MDS) project, we used observational data from the FACE experiments to test this flexible, extensible benchmarking approach aimed at providing repeatable tests of model process representation that can be performed quickly and frequently. Model performance assessments are often limited to traditional residual error analysis; however, this can result in a loss of critical information. Models that fail tests of relative measures of fit may still perform well under measures of absolute fit and mathematical similarity. This implies that models that are discounted as poor predictors of ecological productivity may still be capturing important patterns. Conversely, models that have been found to be good predictors of productivity may be hiding error in their sub-process that result in the right answers for the wrong reasons. Our suite of tests have not only highlighted process based sources of uncertainty in model productivity calculations, they have also quantified the patterns and scale of this error. Combining these findings with PEcAn's model sensitivity analysis and variance decomposition strengthen our ability to identify which processes

Moral emotions as determinants of third-party punishment

Directory of Open Access Journals (Sweden)

Rob M. A. Nelissen

2009-12-01

Full Text Available Third-party punishment has recently received attention as an explanation for human altruism. Feelings of anger in response to norm violations are assumed to motivate third-party sanctions, yet there is only sparse and indirect support for this idea. We investigated the impact of both anger and guilt feelings on third-party sanctions. In two studies both emotions were independently manipulated. Results show that anger and guilt independently constitute sufficient but not necessary causes of punishment. Low levels of punishment are observed only when neither emotion is elicited. We discuss the implications of these findings for the functions of altruistic sanctions.

Party rules, party resources and the politics of parliamentary democracies

DEFF Research Database (Denmark)

Poguntke, Thomas; Scarrow, Susan; Webb, Paul

2016-01-01

, then investigate what it tells us about contemporary party organization in these countries, focusing on parties’ resources, structures and internal decision-making. We examine organizational patterns by country and party family, and where possible we make temporal comparisons with older data sets. Our analyses...... suggest a remarkable coexistence of uniformity and diversity. In terms of the major organizational resources on which parties can draw, such as members, staff and finance, the new evidence largely confirms the continuation of trends identified in previous research: that is, declining membership......, but enhanced financial resources and more paid staff. We also find remarkable uniformity regarding the core architecture of party organizations. At the same time, however, we find substantial variation between countries and party families in terms of their internal processes, with particular regard to how...

Campaigning on behalf of the party? Party constraints on candidate campaign personalisation

DEFF Research Database (Denmark)

Bøggild, Troels; Pedersen, Helene Helboe

2017-01-01

This article analyses what makes political candidates run a party-focused or personalised election campaign. Prior work shows that candidates face incentives from voters and the media to personalise their campaign rhetoric and promises at the expense of party policy. This has raised concerns about...... that party control over the candidate nomination process and campaign financing constrains most political candidates in following electoral incentives for campaign personalisation. Using candidate survey data from the 2009 EP election campaign in 27 countries, we show how candidates from parties in which...... party officials exerted greater control over the nomination process and campaign finances were less likely to engage in personalised campaigning at the expense of the party programme. The findings imply that most parties, as central gatekeepers and resource suppliers, hold important control mechanisms...

Institute of party leadership system of the party creation of modern Ukraine

Directory of Open Access Journals (Sweden)

I. O. Lavrenyuk

2015-06-01

Full Text Available This article based on the study of the theory and practice of party­building in Ukraine examines the role of party leader in the political process and the establishment of parties, implementation of the political power, the development of political consciousness and the formation of modern political elite of our country. It is alleged that party leader – a reputable, recognized in its political environment, the person chosen to lead the party and the ability of citizens to consolidate around a common goal, most effectively represent the interests of a particular social group. It is stated that the defining feature of the phenomenon of party leadership is that under conditions of constant political development and irreversibility of democratic transformations in Ukraine part of leaders of political parties in fact is a powerful talent pool for senior government officials, local government agencies and other administrative institutions. The process of creating games as an integral part of the political process is characterized by a certain way, the mechanism of action of consciousness and culture in the public sphere, which deals with political parties. Regularities component of modern political elite of the party elite acts ­ governing the range of persons in the political party headed by its leader that are directly involved in strategic decision­making, policy formulation of this power, as well as its participation in the political process. We study the classification model of national political parties and the institutions of the party leadership. It is proposed to assess the level of correlation of the party leaders and the general dynamics of the civil society in Ukraine. It is stated that at this time a fundamental change in Ukrainian Party elite has not happened yet. However, there is a long evolution of the institute of the party leadership – a rather difficult process of internal and external, objective and subjective, economic

Benchmarking local healthcare-associated infections: Available benchmarks and interpretation challenges

Directory of Open Access Journals (Sweden)

Aiman El-Saed

2013-10-01

Full Text Available Summary: Growing numbers of healthcare facilities are routinely collecting standardized data on healthcare-associated infection (HAI, which can be used not only to track internal performance but also to compare local data to national and international benchmarks. Benchmarking overall (crude HAI surveillance metrics without accounting or adjusting for potential confounders can result in misleading conclusions. Methods commonly used to provide risk-adjusted metrics include multivariate logistic regression analysis, stratification, indirect standardization, and restrictions. The characteristics of recognized benchmarks worldwide, including the advantages and limitations are described. The choice of the right benchmark for the data from the Gulf Cooperation Council (GCC states is challenging. The chosen benchmark should have similar data collection and presentation methods. Additionally, differences in surveillance environments including regulations should be taken into consideration when considering such a benchmark. The GCC center for infection control took some steps to unify HAI surveillance systems in the region. GCC hospitals still need to overcome legislative and logistic difficulties in sharing data to create their own benchmark. The availability of a regional GCC benchmark may better enable health care workers and researchers to obtain more accurate and realistic comparisons. Keywords: Benchmarking, Comparison, Surveillance, Healthcare-associated infections

What do Parties Want?

DEFF Research Database (Denmark)

Pedersen, Helene Helboe

2012-01-01

What parties want – policy, office or votes - is important to how they represent their voters, how they make strategic decisions and how they respond to external changes in society. What parties strive to accomplish is simply important to what they do. Moreover, our knowledge of what parties want...... is important to what we expect them to do. For instance, coalition theory assumes that parties have homogeneous goals, and hence are equally likely to join coalitions given the same circumstances. However, this article investigates this basic assumption of party goal homogeneity and finds that party goals do...

Low Membership in Czech Political Parties: Party Strategy or Structural Determinants?

Czech Academy of Sciences Publication Activity Database

Linek, Lukáš; Pecháček, Š.

2007-01-01

Roč. 23, č. 2 (2007), s. 259-275 ISSN 1352-3279 R&D Projects: GA MPS 1J004/04-DP1 Institutional research plan: CEZ:AV0Z70280505 Keywords : political parties * party membership * antiparty sentiments * party organization Subject RIV: AD - Politology ; Political Sciences

Parties heed (with caution): Public knowledge of and attitudes towards party finance in Britain.

Science.gov (United States)

vanHeerde-Hudson, Jennifer; Fisher, Justin

2013-01-01

Despite comprehensive reform ( Political Parties, Elections and Referendums Act ) and recent review (Phillips Review in 2007) of party finance in Britain, public opinion of party finance remains plagued by perceptions of corruption, undue influence from wealthy donors, carefree and wasteful spending and, more generally, from the perception that there is just 'too much money' in politics. In this article we argue that knowledge of and attitudes to party finance matter, not least because advocates of reform have cited public opinion as evidence for reform. However, because attitudes to party finance are part of a broader attitudinal structure, opinion-led reforms are unlikely to succeed in increasing public confidence. Using data generated from YouGov's online panel (N=2,008), we demonstrate that the public know little of the key provisions regulating party finance and attitudes to party finance can be explained along two underlying dimensions - Anti-Party Finance and Reformers . As such, we consider whether parties and politicians should be freed from the constraints of public opinion in reforming party finance.

2010 Recruiting Benchmarks Survey. Research Brief

Science.gov (United States)

National Association of Colleges and Employers (NJ1), 2010

2010-01-01

The National Association of Colleges and Employers conducted its annual survey of employer members from June 15, 2010 to August 15, 2010, to benchmark data relevant to college recruiting. From a base of 861 employers holding organizational membership, there were 268 responses for a response rate of 31 percent. Following are some of the major…

Third party bargaining and contract terms: a link over time?

Science.gov (United States)

Brooks, John M; Doucette, William R; Sorofman, Bernard A

2002-01-01

To evaluate whether prior pharmacy bargaining process strategies and pharmacy dependence on third parties affect the bargaining power of pharmacies in price negotiations with third parties. One-time survey. Random sample of 900 independent and small chain pharmacies in nine states: Colorado, Connecticut, Georgia, Kentucky, Minnesota, Oklahoma, Oregon, Pennsylvania, and Wisconsin. Two hundred sixteen of the returned surveys contained sufficient responses for this analysis. Survey data on pharmacy bargaining power and prior pharmacy bargaining strategies, pharmacy dependence, and market characteristics were analyzed using multiple regression in a previously developed and modified provider/third party bargaining model. Pharmacy bargaining power. Pharmacy bargaining power varied across our sample. Pharmacy bargaining power was positively related to whether a pharmacy previously bargained with the third parties, negatively related to prior requests for contract changes, and negatively related to the pharmacy's dependence on third parties in total. Pharmacy bargaining power is related to the bargaining strategies employed by pharmacies during the previous year and the dependence of pharmacies on third party payers in total. With the prevalence of "take-it-or-leave-it" contracts from third parties, prior pharmacy bargaining behavior may affect the initial terms of the contracts that pharmacies are offered.

New insights into flood warning reception and emergency response by affected parties

Science.gov (United States)

Kreibich, Heidi; Müller, Meike; Schröter, Kai; Thieken, Annegret H.

2017-11-01

Flood damage can be mitigated if the parties at risk are reached by flood warnings and if they know how to react appropriately. To gain more knowledge about warning reception and emergency response of private households and companies, surveys were undertaken after the August 2002 and the June 2013 floods in Germany. Despite pronounced regional differences, the results show a clear overall picture: in 2002, early warnings did not work well; e.g. many households (27 %) and companies (45 %) stated that they had not received any flood warnings. Additionally, the preparedness of private households and companies was low in 2002, mainly due to a lack of flood experience. After the 2002 flood, many initiatives were launched and investments undertaken to improve flood risk management, including early warnings and an emergency response in Germany. In 2013, only a small share of the affected households (5 %) and companies (3 %) were not reached by any warnings. Additionally, private households and companies were better prepared. For instance, the share of companies which have an emergency plan in place has increased from 10 % in 2002 to 34 % in 2013. However, there is still room for improvement, which needs to be triggered mainly by effective risk and emergency communication. The challenge is to continuously maintain and advance an integrated early warning and emergency response system even without the occurrence of extreme floods.

Manipulating Morality: Third-Party Intentions Alter Moral Judgments by Changing Causal Reasoning.

Science.gov (United States)

Phillips, Jonathan; Shaw, Alex

2015-08-01

The present studies investigate how the intentions of third parties influence judgments of moral responsibility for other agents who commit immoral acts. Using cases in which an agent acts under some situational constraint brought about by a third party, we ask whether the agent is blamed less for the immoral act when the third party intended for that act to occur. Study 1 demonstrates that third-party intentions do influence judgments of blame. Study 2 finds that third-party intentions only influence moral judgments when the agent's actions precisely match the third party's intention. Study 3 shows that this effect arises from changes in participants' causal perception that the third party was controlling the agent. Studies 4 and 5, respectively, show that the effect cannot be explained by changes in the distribution of blame or perceived differences in situational constraint faced by the agent. © 2014 Cognitive Science Society, Inc.

Third party processing

International Nuclear Information System (INIS)

Clark, S.

1997-01-01

The importance of Canada's natural gas industry to remain competitive on a global level was discussed. Third party processing is a tool that the Canadian gas industry can use to overcome the relative disadvantage of smaller, and therefore more expensive, gas processing plants in Canada, and to maintain, and even improve, its competitive position vis-a-vis its US counterparts. The principal role of a third party processor is to provide midstream services such as raw gas gathering, field compression, gas processing, sales gas transmission, and natural gas liquids fractionation. Some third party processors also provide marketing services. Third party processors add value to the gas producer by reducing risk, reducing cost, improving reliability, and improving netbacks. The many variables involved in determining the economic viability of third party processing, including the quantity and deliverability of the raw resource, facility capacity, capital investment, operating costs, technology, fee structures, operational reliability, and speed, among others, were examined and the significance of each variable was explained

Golkar Party's Political Communications the New Paradigm Bakrie Leadership 2009-2013

Directory of Open Access Journals (Sweden)

Khoiruddin Muchtar

2013-11-01

Full Text Available This study base on the efforts of the Golkar Party's to the process of interpretation, socialization, and implementation of the new paradigm, the paradigm guide to reformations Golkar Party's become to democratic, independent, solid, strong, foundamental, and responsive. How Golkar party's political communication about socialization and implementation of a new paradigm of Golkar Party's leadership Aburizal Bakrie-year period from 2009 to 2012.The aim of this research is to study and overview of the process of socialization and implementation new paradigm Golkar Party's of the Aburizal Bakrie’s leadership. This contect described to using constructivist paradigm through the theory of Performance of Communication and Structuration. Research using the case study method. Data obtained by participation observer, unstructured interviews, and documentary study. The data also collected from informants. The results of this research show: 1 The Golkar Party's has a very significant infrastructure, so the making easier to socialization new paradigm to internal party, but Golkar Party's can not erase stigma society as the New Order party. Socializing new paradigm Golkar Party's to be done in integrated, systematic and continuous addressed to all cadres of various levels from the center to the village. 2 the new paradigm Golkar Party's ideals as the basis and foundation values stand for the Golkar Party's, the implementation is faced with the reality of the condition of the various political considerations and the interests of power, so it can not shown the Golkar Party's political communication with the direction of the reality, Golkar Party's must be have to political communication with the role of multi faces.

About green political parties

Directory of Open Access Journals (Sweden)

Orlović Slobodan P.

2015-01-01

Full Text Available In this work the author refers to some legal and political questions in connection with green political parties. Those questions cover: the ideology of green political parties, their number and influence, both in general and in Serbia. The first part of work is generally speaking about political parties - their definition, ideology, role and action. Main thesis in this work is that green political parties, by their appearance, were something new on the political scene. But quickly, because of objective and subjective reasons, they were changing original ideas and were beginning to resemble to all other political parties. In this way, they lost their vanguard and political alternativeness.

Benchmarking in University Toolbox

Directory of Open Access Journals (Sweden)

Katarzyna Kuźmicz

2015-06-01

Full Text Available In the face of global competition and rising challenges that higher education institutions (HEIs meet, it is imperative to increase innovativeness and efficiency of their management. Benchmarking can be the appropriate tool to search for a point of reference necessary to assess institution’s competitive position and learn from the best in order to improve. The primary purpose of the paper is to present in-depth analysis of benchmarking application in HEIs worldwide. The study involves indicating premises of using benchmarking in HEIs. It also contains detailed examination of types, approaches and scope of benchmarking initiatives. The thorough insight of benchmarking applications enabled developing classification of benchmarking undertakings in HEIs. The paper includes review of the most recent benchmarking projects and relating them to the classification according to the elaborated criteria (geographical range, scope, type of data, subject, support and continuity. The presented examples were chosen in order to exemplify different approaches to benchmarking in higher education setting. The study was performed on the basis of the published reports from benchmarking projects, scientific literature and the experience of the author from the active participation in benchmarking projects. The paper concludes with recommendations for university managers undertaking benchmarking, derived on the basis of the conducted analysis.

Library Benchmarking

Directory of Open Access Journals (Sweden)

Wiji Suwarno

2017-02-01

Full Text Available The term benchmarking has been encountered in the implementation of total quality (TQM or in Indonesian termed holistic quality management because benchmarking is a tool to look for ideas or learn from the library. Benchmarking is a processof measuring and comparing for continuous business process of systematic and continuous measurement, the process of measuring and comparing for continuous business process of an organization to get information that can help these organization improve their performance efforts.

FENDL neutronics benchmark: Specifications for the calculational neutronics and shielding benchmark

International Nuclear Information System (INIS)

Sawan, M.E.

1994-12-01

During the IAEA Advisory Group Meeting on ''Improved Evaluations and Integral Data Testing for FENDL'' held in Garching near Munich, Germany in the period 12-16 September 1994, the Working Group II on ''Experimental and Calculational Benchmarks on Fusion Neutronics for ITER'' recommended that a calculational benchmark representative of the ITER design should be developed. This report describes the neutronics and shielding calculational benchmark available for scientists interested in performing analysis for this benchmark. (author)

Political Parties and Innovation

DEFF Research Database (Denmark)

Bischoff, Carina Saxlund; Christiansen, Flemming Juul

2017-01-01

parties themselves as well their impact on potentially innovative public decisions. One major expectation is that hierarchical parties with centralized leadership make more efficient decisions but that sustainable innovation outcomes promoted by collaborative efforts are easier to obtain for decentralized...... political parties with participatory internal democratic processes....

Political Market Orientation and Strategic Party Postures in Danish Political Parties

DEFF Research Database (Denmark)

Ormrod, Robert P.; Henneberg, Stephan

2011-01-01

Purpose – This paper investigates the relationship between the strategic postures and political market orientation profile of two Danish parties. Profile stability at the organisational level is used as a control variable. Design/methodology/approach – The strategic political postures of two Danish...... parties are derived using a self-typing study. Based on configuration theory, ideal organisational profiles to implement these studies are juxtaposed with the actual political market orientation profile for each party, gained from two datasets analysed using Partial Least Squares. Member activity levels...... Ideologist. Thus, Party A exhibits a mismatch between strategic orientation and implemented organisational profile, based on configuration theory. The results were generally stable across political activity levels. Originality/value – The study contributes to understanding the concept of market orientation...

Intra-party democracy beyond aggregation

DEFF Research Database (Denmark)

Wolkenstein, Fabio

2016-01-01

, discussing several functions intra-party deliberation is said to serve in the democratic theory literature. It then goes on to explore the deliberative credentials of political discussion between party members, drawing on group interviews with party members in two Social Democratic parties in Germany...

Benchmarking and Performance Measurement.

Science.gov (United States)

Town, J. Stephen

This paper defines benchmarking and its relationship to quality management, describes a project which applied the technique in a library context, and explores the relationship between performance measurement and benchmarking. Numerous benchmarking methods contain similar elements: deciding what to benchmark; identifying partners; gathering…

New insights into flood warning reception and emergency response by affected parties

Directory of Open Access Journals (Sweden)

H. Kreibich

2017-11-01

Full Text Available Flood damage can be mitigated if the parties at risk are reached by flood warnings and if they know how to react appropriately. To gain more knowledge about warning reception and emergency response of private households and companies, surveys were undertaken after the August 2002 and the June 2013 floods in Germany. Despite pronounced regional differences, the results show a clear overall picture: in 2002, early warnings did not work well; e.g. many households (27 % and companies (45 % stated that they had not received any flood warnings. Additionally, the preparedness of private households and companies was low in 2002, mainly due to a lack of flood experience. After the 2002 flood, many initiatives were launched and investments undertaken to improve flood risk management, including early warnings and an emergency response in Germany. In 2013, only a small share of the affected households (5 % and companies (3 % were not reached by any warnings. Additionally, private households and companies were better prepared. For instance, the share of companies which have an emergency plan in place has increased from 10 % in 2002 to 34 % in 2013. However, there is still room for improvement, which needs to be triggered mainly by effective risk and emergency communication. The challenge is to continuously maintain and advance an integrated early warning and emergency response system even without the occurrence of extreme floods.

Benchmarking in the Netherlands

International Nuclear Information System (INIS)

1999-01-01

In two articles an overview is given of the activities in the Dutch industry and energy sector with respect to benchmarking. In benchmarking operational processes of different competitive businesses are compared to improve your own performance. Benchmark covenants for energy efficiency between the Dutch government and industrial sectors contribute to a growth of the number of benchmark surveys in the energy intensive industry in the Netherlands. However, some doubt the effectiveness of the benchmark studies

Third-party social evaluations of humans by monkeys and dogs.

Science.gov (United States)

Anderson, James R; Bucher, Benoit; Chijiiwa, Hitomi; Kuroshima, Hika; Takimoto, Ayaka; Fujita, Kazuo

2017-11-01

Developmental psychologists are increasingly interested in young children's evaluations of individuals based on third-party interactions. Studies have shown that infants react negatively to agents who display harmful intentions toward others, and to those who behave unfairly. We describe experimental studies of capuchin monkeys' and pet dogs' differential reactions to people who are helpful or unhelpful in third-party contexts, and monkeys' responses to people who behave unfairly in exchanges of objects with a third party. We also present evidence that capuchin monkeys monitor the context of failures to help and violations of reciprocity, and that intentionality is one factor underlying their social evaluations of individuals whom they see interacting with others. We conclude by proposing some questions for studies of nonhuman species' third party-based social evaluations. Copyright © 2017 Elsevier Ltd. All rights reserved.

From 2D Silhouettes to 3D Object Retrieval: Contributions and Benchmarking

Directory of Open Access Journals (Sweden)

Napoléon Thibault

2010-01-01

Full Text Available 3D retrieval has recently emerged as an important boost for 2D search techniques. This is mainly due to its several complementary aspects, for instance, enriching views in 2D image datasets, overcoming occlusion and serving in many real-world applications such as photography, art, archeology, and geolocalization. In this paper, we introduce a complete "2D photography to 3D object" retrieval framework. Given a (collection of picture(s or sketch(es of the same scene or object, the method allows us to retrieve the underlying similar objects in a database of 3D models. The contribution of our method includes (i a generative approach for alignment able to find canonical views consistently through scenes/objects and (ii the application of an efficient but effective matching method used for ranking. The results are reported through the Princeton Shape Benchmark and the Shrec benchmarking consortium evaluated/compared by a third party. In the two gallery sets, our framework achieves very encouraging performance and outperforms the other runs.

Political Market Orientation and Strategic Party Postures in Danish Political Parties

DEFF Research Database (Denmark)

Ormrod, Robert P.; Henneberg, Stephan

2011-01-01

Purpose – This paper investigates the relationship between the strategic postures and political market orientation profile of two Danish parties. Profile stability at the organisational level is used as a control variable. Design/methodology/approach – The strategic political postures of two Danish...... are used to control for organisational stability. Findings – The self-typing study revealed that Party A was perceived to follow a Relationship Builder posture, and Party B a Convinced Ideologist posture. However, both market orientation profiles resembled the organisational structures of a Convinced...... in the political sphere. More specifically it empirically links political market orientation as an issue of political marketing implementation on the one hand, and strategic postures of parties as a strategic issue on the other, following a configuration theory logic. Research limitations...

Book Review: Training the Party: Party Adaptation and Elite Training in Reform-era China

DEFF Research Database (Denmark)

Brødsgaard, Kjeld Erik

2016-01-01

Review of: Training the Party: Party Adaptation and Elite Training in Reform-era China. Charlotte P. Lee . Cambridge: Cambridge University Press, 2015. xii + 251 pp. $99.99. ISBN 978-1-107-09063-7......Review of: Training the Party: Party Adaptation and Elite Training in Reform-era China. Charlotte P. Lee . Cambridge: Cambridge University Press, 2015. xii + 251 pp. $99.99. ISBN 978-1-107-09063-7...

WLUP benchmarks

International Nuclear Information System (INIS)

Leszczynski, Francisco

2002-01-01

The IAEA-WIMS Library Update Project (WLUP) is on the end stage. The final library will be released on 2002. It is a result of research and development made by more than ten investigators during 10 years. The organization of benchmarks for testing and choosing the best set of data has been coordinated by the author of this paper. It is presented the organization, name conventions, contents and documentation of WLUP benchmarks, and an updated list of the main parameters for all cases. First, the benchmarks objectives and types are given. Then, comparisons of results from different WIMSD libraries are included. Finally it is described the program QVALUE for analysis and plot of results. Some examples are given. The set of benchmarks implemented on this work is a fundamental tool for testing new multigroup libraries. (author)

Benchmarking electricity distribution

Energy Technology Data Exchange (ETDEWEB)

Watts, K. [Department of Justice and Attorney-General, QLD (Australia)

1995-12-31

Benchmarking has been described as a method of continuous improvement that involves an ongoing and systematic evaluation and incorporation of external products, services and processes recognised as representing best practice. It is a management tool similar to total quality management (TQM) and business process re-engineering (BPR), and is best used as part of a total package. This paper discusses benchmarking models and approaches and suggests a few key performance indicators that could be applied to benchmarking electricity distribution utilities. Some recent benchmarking studies are used as examples and briefly discussed. It is concluded that benchmarking is a strong tool to be added to the range of techniques that can be used by electricity distribution utilities and other organizations in search of continuous improvement, and that there is now a high level of interest in Australia. Benchmarking represents an opportunity for organizations to approach learning from others in a disciplined and highly productive way, which will complement the other micro-economic reforms being implemented in Australia. (author). 26 refs.

Exploring the ‘ultimate’ step in the mediatization of political parties

DEFF Research Database (Denmark)

Ørsten, Mark; Willig, Ida; Pedersen, Leif Hemming

Previous studies exploring the fourth dimension of mediatization, that is to say the extent to which political parties adjust their perceptions and behaviour to news media logic, have focused on three steps of structural change that political parties may take as a response to the increasing......, parties may begin to especially focus on candidates who are skilled in communicating with the news media (Strömbäck & Van Alest, 2013).So far, research into the fourth dimension of mediatization in Denmark has focused mostly on the first two steps (Blach-Ørsten, 2016; Elmelund-Præstekær & Hopmann, 2016...

Gendering transnational party politics

DEFF Research Database (Denmark)

Kantola, Johanna; Rolandsen-Agustín, Lise

2016-01-01

research traditions, we build toward an analytical framework to study gender and transnational party politics. Our empirical analysis focuses on two policy issues, the economic crisis and the sexual and reproductive health and rights, analyzing European Parliament reports, debates and voting on the issues...... from 2009 to 2014. By focusing on gender equality constructions and the way in which consensus and contestation are built around them within and between party groups, we argue that shared constructions about gender equality are issue specific and change over time. Consensus breaks down along the left......In this article, we analyze transnational party politics in the European Union from a gender perspective. This is a subject that has been neglected both by mainstream European studies on party politics and by gender scholars who work on political parties. Drawing on the insights of these two...

Benchmarking semantic web technology

CERN Document Server

García-Castro, R

2009-01-01

This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

RUNE benchmarks

DEFF Research Database (Denmark)

Peña, Alfredo

This report contains the description of a number of benchmarks with the purpose of evaluating flow models for near-shore wind resource estimation. The benchmarks are designed based on the comprehensive database of observations that the RUNE coastal experiment established from onshore lidar...

MCNP neutron benchmarks

International Nuclear Information System (INIS)

Hendricks, J.S.; Whalen, D.J.; Cardon, D.A.; Uhle, J.L.

1991-01-01

Over 50 neutron benchmark calculations have recently been completed as part of an ongoing program to validate the MCNP Monte Carlo radiation transport code. The new and significant aspects of this work are as follows: These calculations are the first attempt at a validation program for MCNP and the first official benchmarking of version 4 of the code. We believe the chosen set of benchmarks is a comprehensive set that may be useful for benchmarking other radiation transport codes and data libraries. These calculations provide insight into how well neutron transport calculations can be expected to model a wide variety of problems

Multiscale benchmarking of drug delivery vectors.

Science.gov (United States)

Summers, Huw D; Ware, Matthew J; Majithia, Ravish; Meissner, Kenith E; Godin, Biana; Rees, Paul

2016-10-01

Cross-system comparisons of drug delivery vectors are essential to ensure optimal design. An in-vitro experimental protocol is presented that separates the role of the delivery vector from that of its cargo in determining the cell response, thus allowing quantitative comparison of different systems. The technique is validated through benchmarking of the dose-response of human fibroblast cells exposed to the cationic molecule, polyethylene imine (PEI); delivered as a free molecule and as a cargo on the surface of CdSe nanoparticles and Silica microparticles. The exposure metrics are converted to a delivered dose with the transport properties of the different scale systems characterized by a delivery time, τ. The benchmarking highlights an agglomeration of the free PEI molecules into micron sized clusters and identifies the metric determining cell death as the total number of PEI molecules presented to cells, determined by the delivery vector dose and the surface density of the cargo. Copyright © 2016 Elsevier Inc. All rights reserved.

Third-party brachytherapy source calibrations and physicist responsibilities: Report of the AAPM Low Energy Brachytherapy Source Calibration Working Group

International Nuclear Information System (INIS)

Butler, Wayne M.; Bice, William S. Jr.; DeWerd, Larry A.; Hevezi, James M.; Huq, M. Saiful; Ibbott, Geoffrey S.; Palta, Jatinder R.; Rivard, Mark J.; Seuntjens, Jan P.; Thomadsen, Bruce R.

2008-01-01

The AAPM Low Energy Brachytherapy Source Calibration Working Group was formed to investigate and recommend quality control and quality assurance procedures for brachytherapy sources prior to clinical use. Compiling and clarifying recommendations established by previous AAPM Task Groups 40, 56, and 64 were among the working group's charges, which also included the role of third-party handlers to perform loading and assay of sources. This document presents the findings of the working group on the responsibilities of the institutional medical physicist and a clarification of the existing AAPM recommendations in the assay of brachytherapy sources. Responsibility for the performance and attestation of source assays rests with the institutional medical physicist, who must use calibration equipment appropriate for each source type used at the institution. Such equipment and calibration procedures shall ensure secondary traceability to a national standard. For each multi-source implant, 10% of the sources or ten sources, whichever is greater, are to be assayed. Procedures for presterilized source packaging are outlined. The mean source strength of the assayed sources must agree with the manufacturer's stated strength to within 3%, or action must be taken to resolve the difference. Third party assays do not absolve the institutional physicist from the responsibility to perform the institutional measurement and attest to the strength of the implanted sources. The AAPM leaves it to the discretion of the institutional medical physicist whether the manufacturer's or institutional physicist's measured value should be used in performing dosimetry calculations

Consumer use and response to online third-party raw DNA interpretation services.

Science.gov (United States)

Wang, Catharine; Cahill, Tiernan J; Parlato, Andrew; Wertz, Blake; Zhong, Qiankun; Cunningham, Tricia Norkunas; Cummings, James J

2018-01-01

With the availability of raw DNA generated from direct-to-consumer (DTC) testing companies, there has been a proliferation of third-party online services that are available to interpret the raw data for both genealogy and/or health purposes. This study examines the current landscape and downstream clinical implications of consumer use of third-party services. Study participants were recruited online from social media platforms. A total of 321 survey respondents reported using third-party services for raw DNA interpretation. Participants were highly motivated to explore raw DNA for ancestral information (67%), individual health implications (62%), or both (40%). Participants primarily used one of seven companies to interpret raw DNA; 73% used more than one. Company choice was driven by the type of results offered (51%), price (45%), and online reviews (31%). Approximately 30% of participants shared results with a medical provider and 21% shared with more than one. Outcomes of sharing ranged from disinterest/discounting of the information to diagnosis of genetic conditions. Participants were highly satisfied with their decision to analyze raw DNA (M = 4.54/5), yet challenges in understanding interpretation results were reported irrespective of satisfaction ratings. Consumers face challenges in understanding the results and may seek out clinical assistance in interpreting their raw DNA results. © 2017 The Authors. Molecular Genetics & Genomic Medicine published by Wiley Periodicals, Inc.

16 CFR 1507.11 - Party poppers.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Party poppers. 1507.11 Section 1507.11... FIREWORKS DEVICES § 1507.11 Party poppers. Party poppers (also known by other names such as “Champagne Party Poppers,” and “Party Surprise Poppers,”) shall not contain more than 0.25 grains of pyrotechnic...

Polynomial friction pendulum isolators (PFPIs) for seismic performance control of benchmark highway bridge

Science.gov (United States)

Saha, Arijit; Saha, Purnachandra; Patro, Sanjaya Kumar

2017-10-01

The seismic response of a benchmark highway bridge isolated with passive polynomial friction pendulum isolators (PFPIs) is investigated and subjected to six bidirectional ground motion records. The benchmark study is based on a lumped mass finite-element model of the 91/5 highway overcrossing located in Southern California. The PFPI system possesses two important parameters; one is horizontal flexibility and the other is energy absorbing capacity through friction. The evaluation criteria of the benchmark bridge are analyzed considering two parameters, time period of the isolator and coefficient of friction of the isolation surface. The results of the numerical study are compared with those obtained from the traditional friction pendulum system (FPS). Dual design performance of the PFPI system suppressed the displacement and acceleration response of the benchmark highway bridge. The dual design hysteresis loop of the PFPI system is the main advantage over the linear hysteresis loop of the FPS. The numerical result indicates that the seismic performance of the PFPI system is better than that of the traditional FPS isolated system. Further, it is observed that variations of the isolation time period and coefficient of friction of the FPS and PFPI systems have a significant effect on the peak responses of the benchmark highway bridge.

BENCHMARK DOSES FOR CHEMICAL MIXTURES: EVALUATION OF A MIXTURE OF 18 PHAHS.

Science.gov (United States)

Benchmark doses (BMDs), defined as doses of a substance that are expected to result in a pre-specified level of "benchmark" response (BMR), have been used for quantifying the risk associated with exposure to environmental hazards. The lower confidence limit of the BMD is used as...

Benchmark selection

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Tvede, Mich

2002-01-01

Within a production theoretic framework, this paper considers an axiomatic approach to benchmark selection. It is shown that two simple and weak axioms; efficiency and comprehensive monotonicity characterize a natural family of benchmarks which typically becomes unique. Further axioms are added...... in order to obtain a unique selection...

Multi-party semi-quantum key distribution-convertible multi-party semi-quantum secret sharing

Science.gov (United States)

Yu, Kun-Fei; Gu, Jun; Hwang, Tzonelih; Gope, Prosanta

2017-08-01

This paper proposes a multi-party semi-quantum secret sharing (MSQSS) protocol which allows a quantum party (manager) to share a secret among several classical parties (agents) based on GHZ-like states. By utilizing the special properties of GHZ-like states, the proposed scheme can easily detect outside eavesdropping attacks and has the highest qubit efficiency among the existing MSQSS protocols. Then, we illustrate an efficient way to convert the proposed MSQSS protocol into a multi-party semi-quantum key distribution (MSQKD) protocol. The proposed approach is even useful to convert all the existing measure-resend type of semi-quantum secret sharing protocols into semi-quantum key distribution protocols.

Benchmark for Neutronic Analysis of Sodium-cooled Fast Reactor Cores with Various Fuel Types and Core Sizes

International Nuclear Information System (INIS)

Stauff, N.E.; Kim, T.K.; Taiwo, T.A.; Buiron, L.; Rimpault, G.; Brun, E.; Lee, Y.K.; Pataki, I.; Kereszturi, A.; Tota, A.; Parisi, C.; Fridman, E.; Guilliard, N.; Kugo, T.; Sugino, K.; Uematsu, M.M.; Ponomarev, A.; Messaoudi, N.; Lin Tan, R.; Kozlowski, T.; Bernnat, W.; Blanchet, D.; Brun, E.; Buiron, L.; Fridman, E.; Guilliard, N.; Kereszturi, A.; Kim, T.K.; Kozlowski, T.; Kugo, T.; Lee, Y.K.; Lin Tan, R.; Messaoudi, N.; Parisi, C.; Pataki, I.; Ponomarev, A.; Rimpault, G.; Stauff, N.E.; Sugino, K.; Taiwo, T.A.; Tota, A.; Uematsu, M.M.; Monti, S.; Yamaji, A.; Nakahara, Y.; Gulliford, J.

2016-01-01

One of the foremost Generation IV International Forum (GIF) objectives is to design nuclear reactor cores that can passively avoid damage of the reactor when control rods fail to scram in response to postulated accident initiators (e.g. inadvertent reactivity insertion or loss of coolant flow). The analysis of such unprotected transients depends primarily on the physical properties of the fuel and the reactivity feedback coefficients of the core. Within the activities of the Working Party on Scientific Issues of Reactor Systems (WPRS), the Sodium Fast Reactor core Feed-back and Transient response (SFR-FT) Task Force was proposed to evaluate core performance characteristics of several Generation IV Sodium-cooled Fast Reactor (SFR) concepts. A set of four numerical benchmark cases was initially developed with different core sizes and fuel types in order to perform neutronic characterisation, evaluation of the feedback coefficients and transient calculations. Two 'large' SFR core designs were proposed by CEA: those generate 3 600 MW(th) and employ oxide and carbide fuel technologies. Two 'medium' SFR core designs proposed by ANL complete the set. These medium SFR cores generate 1 000 MW(th) and employ oxide and metallic fuel technologies. The present report summarises the results obtained by the WPRS for the neutronic characterisation benchmark exercise proposed. The benchmark definition is detailed in Chapter 2. Eleven institutions contributed to this benchmark: Argonne National Laboratory (ANL), Commissariat a l'energie atomique et aux energies alternatives (CEA of Cadarache), Commissariat a l'energie atomique et aux energies alternatives (CEA of Saclay), Centre for Energy Research (CER-EK), Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Helmholtz Zentrum Dresden Rossendorf (HZDR), Institute of Nuclear Technology and Energy Systems (IKE), Japan Atomic Energy Agency (JAEA), Karlsruhe Institute of Technology (KIT

Partis islamistes et démocratisation : expérience du Parti de la ...

International Development Research Centre (IDRC) Digital Library (Canada)

Partis islamistes et démocratisation : expérience du Parti de la justice et du développement (Turquie). En Turquie, les élections de novembre 2002 ont été remportées par un nouveau parti politique d'orientation islamiste, l'AKP, qui détient environ les deux tiers des sièges au Parlement. La victoire de l'AKP traduit ...

Immigration politics Italian style: the paradoxical behaviour of mainstream and populist parties.

Science.gov (United States)

Perlmutter, T

1996-01-01

This article explores the role of electoral politics in managing immigration as a policy option in Italy. Italy was late in passing its first comprehensive immigration legislation (1990). A small, liberal party waged a campaign against the proposed immigration law. A party known for right-wing posturing did not mobilize against the law. These political postures were not anticipated by conventional wisdom. Conventional wisdom suggests that immigration should not be an electoral issue and that consensus solutions should be sought. It is argued that the Italian response supports the view that in a fragmented, multi-party system, minor parties will be more likely to mobilize. Two mass media studies were used as the basis for this article's analysis. The studies provide detailed evidence on party willingness to publicly discuss immigration and the ways the issues are framed. The Italian case illustrates the tendency for mainstream, pro-system parties to politicize the issue and extremist, anti-system parties to depoliticize it. The DC and PCI, as mass parties, behaved traditionally and supported moderately open immigration policies, but in closed forums. The minor parties had a stake in shifting electoral support, so the PSI took an outspoken stand and the PARI publicized its exclusion from the policy-making process and its support for more restrictive policies. It was the constituencies and the leadership structure that facilitated these strategies. The author differs from Betz's party analysis by arguing that party ideology may not be a useful guide for predicting stands on immigration, and that it is difficult to generalize about immigration.

U.S. Residential Photovoltaic (PV) System Prices, Q4 2013 Benchmarks: Cash Purchase, Fair Market Value, and Prepaid Lease Transaction Prices

Energy Technology Data Exchange (ETDEWEB)

Davidson, C.; James, T. L.; Margolis, R.; Fu, R.; Feldman, D.

2014-10-01

The price of photovoltaic (PV) systems in the United States (i.e., the cost to the system owner) has dropped precipitously in recent years, led by substantial reductions in global PV module prices. This report provides a Q4 2013 update for residential PV systems, based on an objective methodology that closely approximates the book value of a PV system. Several cases are benchmarked to represent common variation in business models, labor rates, and module choice. We estimate a weighted-average cash purchase price of $3.29/W for modeled standard-efficiency, polycrystalline-silicon residential PV systems installed in the United States. This is a 46% decline from the 2013-dollar-adjusted price reported in the Q4 2010 benchmark report. In addition, this report frames the cash purchase price in the context of key price metrics relevant to the continually evolving landscape of third-party-owned PV systems by benchmarking the minimum sustainable lease price and the fair market value of residential PV systems.

Partying as Everyday Life

DEFF Research Database (Denmark)

Demant, Jakob; Østergaard, Jeanette

2007-01-01

situates the event in everyday life. By drawing on Maffesoli's (1996) concept of ‘sociality' and Lincoln's (2005) concept of zoning the spatial and social logic of the house, partying is analysed using both qualitative and quantitative material. The analysis suggests that the consumption of alcohol (i.......e. collective intoxication) is one way the parents' dining room is transformed creatively into a space for teenage partying. Hence, the social logic of a party is to consume alcohol collectively as it symbolises commitment to both the party and to the specific group of friends. Finally, attention is drawn...... to reaffirm friendship and is therefore an integrated part of adolescents' everyday life.  ...

Benchmarking school nursing practice: the North West Regional Benchmarking Group

OpenAIRE

Littler, Nadine; Mullen, Margaret; Beckett, Helen; Freshney, Alice; Pinder, Lynn

2016-01-01

It is essential that the quality of care is reviewed regularly through robust processes such as benchmarking to ensure all outcomes and resources are evidence-based so that children and young people’s needs are met effectively. This article provides an example of the use of benchmarking in school nursing practice. Benchmarking has been defined as a process for finding, adapting and applying best practices (Camp, 1994). This concept was first adopted in the 1970s ‘from industry where it was us...

Promoting Party Politics in Emerging Democracies

NARCIS (Netherlands)

Burnell, P.; Gerrits, A.

2010-01-01

This opening section briefly introduces international political party support, that is, assistance to political parties by international organizations, mostly from the US and Europe, to strengthen individual political parties, to promote peaceful interaction between parties and to help to create a

Benchmarking Variable Selection in QSAR.

Science.gov (United States)

Eklund, Martin; Norinder, Ulf; Boyer, Scott; Carlsson, Lars

2012-02-01

Variable selection is important in QSAR modeling since it can improve model performance and transparency, as well as reduce the computational cost of model fitting and predictions. Which variable selection methods that perform well in QSAR settings is largely unknown. To address this question we, in a total of 1728 benchmarking experiments, rigorously investigated how eight variable selection methods affect the predictive performance and transparency of random forest models fitted to seven QSAR datasets covering different endpoints, descriptors sets, types of response variables, and number of chemical compounds. The results show that univariate variable selection methods are suboptimal and that the number of variables in the benchmarked datasets can be reduced with about 60 % without significant loss in model performance when using multivariate adaptive regression splines MARS and forward selection. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Derivation of the critical effect size/benchmark response for the dose-response analysis of the uptake of radioactive iodine in the human thyroid.

Science.gov (United States)

Weterings, Peter J J M; Loftus, Christine; Lewandowski, Thomas A

2016-08-22

Potential adverse effects of chemical substances on thyroid function are usually examined by measuring serum levels of thyroid-related hormones. Instead, recent risk assessments for thyroid-active chemicals have focussed on iodine uptake inhibition, an upstream event that by itself is not necessarily adverse. Establishing the extent of uptake inhibition that can be considered de minimis, the chosen benchmark response (BMR), is therefore critical. The BMR values selected by two international advisory bodies were 5% and 50%, a difference that had correspondingly large impacts on the estimated risks and health-based guidance values that were established. Potential treatment-related inhibition of thyroidal iodine uptake is usually determined by comparing thyroidal uptake of radioactive iodine (RAIU) during treatment with a single pre-treatment RAIU value. In the present study it is demonstrated that the physiological intra-individual variation in iodine uptake is much larger than 5%. Consequently, in-treatment RAIU values, expressed as a percentage of the pre-treatment value, have an inherent variation, that needs to be considered when conducting dose-response analyses. Based on statistical and biological considerations, a BMR of 20% is proposed for benchmark dose analysis of human thyroidal iodine uptake data, to take the inherent variation in relative RAIU data into account. Implications for the tolerated daily intakes for perchlorate and chlorate, recently established by the European Food Safety Authority (EFSA), are discussed. Copyright © 2016 The Author(s). Published by Elsevier Ireland Ltd.. All rights reserved.

On the Sources of Establishment-selective Work of the Bolshevik Party

Directory of Open Access Journals (Sweden)

Vasily P. Pashin

2014-03-01

Full Text Available Based on the archive materials from the funds of the Russian State Archive of Social and Political History, periodical publications of the 1920s and official Bolshevik Party documents, the article strives to analyze main directions in the search for creation of the nation-wide system for selection and appointment of executive staff. It shows the work of the Uchraspredotdel (Registration and Distribution Office of the Central Committee of the Russian Communist Party of Bolsheviks in its attempt to manage quality selection of staff by way of distribution, appointment and mobilization, and the transgression from the quantitative registration of all Communists to the registration based on application forms. The article also demonstrates the failure of the idea that all Bolshevik party members are potential organizers and leaders. It studies objective and subjective reasons for failures in the first attempts to select “responsible officials” on the nation-wide scale. The article also characterizes activity and opinions of a number of executives in their approaches towards creation of organization-selective work and their attitudes to it. It reveals the persistent aspiration of the Bolshevik Party to establish personal responsibility of the appointed executives, for the directive decisions, of its central authorities, which they take and implement.

Communication and Consultation with Interested Parties by the Regulatory Body. General Safety Guide

International Nuclear Information System (INIS)

2017-01-01

This Safety Guide provides recommendations on meeting the safety requirements concerning communication and consultation with the public and other interested parties by the regulatory body about the possible radiation risks associated with facilities and activities, and about processes and decisions of the regulatory body. The Safety Guide can be used by authorized parties in circumstances where there are regulatory requirements placed on them for communication and consultation. It may also be used by other organizations or individuals considering their responsibilities for communication and consultation with interested parties.

Benchmarking of World Health Organization surgical safety checklist

International Nuclear Information System (INIS)

Messahel, Farouk M.; AlQahtani, Ali S.

2009-01-01

To compare the quality of our services with the World Health Organization (WHO) surgical safety recommendations as a reference, to improve our services if they fall short of that of the WHO, and to publish our additional standards, so that they may be included in future revision of WHO checklist. We conducted this study on 15th July 2008 at the Armed Forces Hospital, Wadi Al-Dawasir, Kingdom of Saudi Arabia. We compared each WHO safety standard item with its corresponding standard in our checklist. There were 4 possibilities for the comparison: that our performance meet, was less than or exceeded the quality-of-care measures in the WHO checklist, or that there are additional safety measures in either checklist that need to be considered by each party. Since its introduction in 1997, our checklist was applied to 11828 patients and resulted in error-free outcomes. Benchmarking proved that our surgical safety performance does not only match the standards of the WHO surgical safety checklist, but also exceeds it in other safety areas (for example measures to prevent perioperative hypothermia and venous thromboembolism). Benchmarking is a continuous quality improvement process aimed at providing the best available at the time in healthcare, and we recommend its adoption by healthcare providers. The WHO surgical safety checklist is a bold step in the right direction towards safer surgical outcomes. Feedback from other medical establishments should be encouraged. (author)

Interactive benchmarking

DEFF Research Database (Denmark)

Lawson, Lartey; Nielsen, Kurt

2005-01-01

We discuss individual learning by interactive benchmarking using stochastic frontier models. The interactions allow the user to tailor the performance evaluation to preferences and explore alternative improvement strategies by selecting and searching the different frontiers using directional...... in the suggested benchmarking tool. The study investigates how different characteristics on dairy farms influences the technical efficiency....

Verification and validation benchmarks.

Energy Technology Data Exchange (ETDEWEB)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-02-01

Verification and validation (V&V) are the primary means to assess the accuracy and reliability of computational simulations. V&V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V&V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the level of

Departies: conceptualizing extended youth parties

DEFF Research Database (Denmark)

Fjær, Eivind Grip; Tutenges, Sébastien

2017-01-01

Every year, millions of young people travel away from home to party for days or weeks on end in permissive environments, such as music festivals, dance parties, and nightlife resorts. The studies that have been conducted on these extended youth parties have focused primarily on specific risk...

Liberal Party Politics, the South African War, and the Rhetoric of Imperial Governance.

Science.gov (United States)

Mackley, Simon

2018-03-01

This article examines the imperial rhetoric of the Liberal Party during the South African War of 1899-1902, charting its use and development across five key controversies spanning the course of the conflict. Moving beyond traditional interpretations of the Liberal split as the product of competing visions of Empire and approaches to imperialism, this article argues for the need to recognize also the continuities within the imperial rhetoric of fin-de-siècle British Liberalism. Building on recent studies of political languages, it identifies how Liberal speakers from across the party operated within a rhetorical framework that emphasized three ideals of imperial governance: good government, self-government, and pluralism. In doing so, this article seeks to advance our understanding of the South African War as an episode in British party politics, demonstrating the complexity and nuance of the Liberal Party's response to the conflict. Furthermore, by undertaking an in-depth exploration of the rhetoric of imperial governance, this article highlights the Liberal response to the South African War as a case study for the reinvention and reiteration of both party and imperial languages in early twentieth-century Britain, with the potential to offer new insights into the political and imperial cultures of the period.

The KMAT: Benchmarking Knowledge Management.

Science.gov (United States)

de Jager, Martha

Provides an overview of knowledge management and benchmarking, including the benefits and methods of benchmarking (e.g., competitive, cooperative, collaborative, and internal benchmarking). Arthur Andersen's KMAT (Knowledge Management Assessment Tool) is described. The KMAT is a collaborative benchmarking tool, designed to help organizations make…

A BENCHMARK PROGRAM FOR EVALUATION OF METHODS FOR COMPUTING SEISMIC RESPONSE OF COUPLED BUILDING-PIPING/EQUIPMENT WITH NON-CLASSICAL DAMPING

International Nuclear Information System (INIS)

Xu, J.; Degrassi, G.; Chokshi, N.

2001-01-01

Under the auspices of the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) developed a comprehensive program to evaluate state-of-the-art methods and computer programs for seismic analysis of typical coupled nuclear power plant (NPP) systems with nonclassical damping. In this program, four benchmark models of coupled building-piping/equipment systems with different damping characteristics were analyzed for a suite of earthquakes by program participants applying their uniquely developed methods and computer programs. This paper presents the results of their analyses, and their comparison to the benchmark solutions generated by BNL using time domain direct integration methods. The participant's analysis results established using complex modal time history methods showed good comparison with the BNL solutions, while the analyses produced with either complex-mode response spectrum methods or classical normal-mode response spectrum method, in general, produced more conservative results, when averaged over a suite of earthquakes. However, when coupling due to damping is significant, complex-mode response spectrum methods performed better than the classical normal-mode response spectrum method. Furthermore, as part of the program objectives, a parametric assessment is also presented in this paper, aimed at evaluation of the applicability of various analysis methods to problems with different dynamic characteristics unique to coupled NPP systems. It is believed that the findings and insights learned from this program will be useful in developing new acceptance criteria and providing guidance for future regulatory activities involving licensing applications of these alternate methods to coupled systems

Democracy, the Party, and Self-Emancipation

NARCIS (Netherlands)

Raekstad, P.

2017-01-01

The Party is once again the subject of sustained discussion among academics and popular movements. Jodi Dean’s most recent book, Crowds and Party, is an attempt to re-think the party form for contemporary politics after the experiences and lessons of Occupy. Crowds and Party is engaging and

Deflection-based method for seismic response analysis of concrete walls: Benchmarking of CAMUS experiment

International Nuclear Information System (INIS)

Basu, Prabir C.; Roshan, A.D.

2007-01-01

A number of shake table tests had been conducted on the scaled down model of a concrete wall as part of CAMUS experiment. The experiments were conducted between 1996 and 1998 in the CEA facilities in Saclay, France. Benchmarking of CAMUS experiments was undertaken as a part of the coordinated research program on 'Safety Significance of Near-Field Earthquakes' organised by International Atomic Energy Agency (IAEA). Technique of deflection-based method was adopted for benchmarking exercise. Non-linear static procedure of deflection-based method has two basic steps: pushover analysis, and determination of target displacement or performance point. Pushover analysis is an analytical procedure to assess the capacity to withstand seismic loading effect that a structural system can offer considering the redundancies and inelastic deformation. Outcome of a pushover analysis is the plot of force-displacement (base shear-top/roof displacement) curve of the structure. This is obtained by step-by-step non-linear static analysis of the structure with increasing value of load. The second step is to determine target displacement, which is also known as performance point. The target displacement is the likely maximum displacement of the structure due to a specified seismic input motion. Established procedures, FEMA-273 and ATC-40, are available to determine this maximum deflection. The responses of CAMUS test specimen are determined by deflection-based method and analytically calculated values compare well with the test results

Benchmarking in Mobarakeh Steel Company

OpenAIRE

Sasan Ghasemi; Mohammad Nazemi; Mehran Nejati

2008-01-01

Benchmarking is considered as one of the most effective ways of improving performance in companies. Although benchmarking in business organizations is a relatively new concept and practice, it has rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan's Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aims to share the process deployed for the benchmarking project in this company and illustrate how th...

Reflexive intergroup bias in third-party punishment.

Science.gov (United States)

Yudkin, Daniel A; Rothmund, Tobias; Twardawski, Mathias; Thalla, Natasha; Van Bavel, Jay J

2016-11-01

Humans show a rare tendency to punish norm-violators who have not harmed them directly-a behavior known as third-party punishment. Research has found that third-party punishment is subject to intergroup bias, whereby people punish members of the out-group more severely than the in-group. Although the prevalence of this behavior is well-documented, the psychological processes underlying it remain largely unexplored. Some work suggests that it stems from people's inherent predisposition to form alliances with in-group members and aggress against out-group members. This implies that people will show reflexive intergroup bias in third-party punishment, favoring in-group over out-group members especially when their capacity for deliberation is impaired. Here we test this hypothesis directly, examining whether intergroup bias in third-party punishment emerges from reflexive, as opposed to deliberative, components of moral cognition. In 3 experiments, utilizing a simulated economic game, we varied participants' group relationship to a transgressor, measured or manipulated the extent to which they relied on reflexive or deliberative judgment, and observed people's punishment decisions. Across group-membership manipulations (American football teams, nationalities, and baseball teams) and 2 assessments of reflexive judgment (response time and cognitive load), reflexive judgment heightened intergroup bias, suggesting that such bias in punishment is inherent to human moral cognition. We discuss the implications of these studies for theories of punishment, cooperation, social behavior, and legal practice. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

REFLECTIONS ON WAGAR ' S WORLD PARTY

Directory of Open Access Journals (Sweden)

Albert Bergesen

2015-08-01

Full Text Available Our task is to reflect upon Wagar's idea of a world party. In case such reflections are affected by the recent historical situation of the collapse of communism/existing socialism in 1989 and the implications this has for visions of progressive politics going into the 21st century. This event colors most political thinking, although for many the response has been that existing socialism was not real socialism, or that existing socialism was but the Stalinist deformation that, if avoided in the future, the 1917 project could again be resumed and human history and social relations remade anew. I don't see it that way. What existing socialism stood for in terms of the role of a vanguard party taking state power for the larger good is, now after the fall, I think off the board as a realistic program that can be sold to anyone.

How Activists Use Benchmarks

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

2015-01-01

Non-governmental organisations use benchmarks as a form of symbolic violence to place political pressure on firms, states, and international organisations. The development of benchmarks requires three elements: (1) salience, that the community of concern is aware of the issue and views...... are put to the test. The first is a reformist benchmarking cycle where organisations defer to experts to create a benchmark that conforms with the broader system of politico-economic norms. The second is a revolutionary benchmarking cycle driven by expert-activists that seek to contest strong vested...... interests and challenge established politico-economic norms. Differentiating these cycles provides insights into how activists work through organisations and with expert networks, as well as how campaigns on complex economic issues can be mounted and sustained....

Latin American intra-party democracy

Directory of Open Access Journals (Sweden)

Aldo Adrián Martínez Hernández

2017-12-01

Full Text Available Research proposes to determine the level of internal democracy of political parties in Latin America from perception of its members, allowing the creation of an index that has parameters for the measurement and comparison of the parties according to its democratic features. At the same time, research supports designing a profile of the parties by subjecting to analysis the relationship between ideology and internal democracy, stressing that despite the differences between left and right, parties in Latin America do not have dichotomous democratic features, while maintaining low levels despite their ideological location.

Benchmarking in Mobarakeh Steel Company

Directory of Open Access Journals (Sweden)

Sasan Ghasemi

2008-05-01

Full Text Available Benchmarking is considered as one of the most effective ways of improving performance incompanies. Although benchmarking in business organizations is a relatively new concept and practice, ithas rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan’s Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aimsto share the process deployed for the benchmarking project in this company and illustrate how the projectsystematic implementation led to succes.

Aquatic Life Benchmarks

Data.gov (United States)

U.S. Environmental Protection Agency — The Aquatic Life Benchmarks is an EPA-developed set of criteria for freshwater species. These benchmarks are based on toxicity values reviewed by EPA and used in the...

Multi-party Quantum Computation

OpenAIRE

Smith, Adam

2001-01-01

We investigate definitions of and protocols for multi-party quantum computing in the scenario where the secret data are quantum systems. We work in the quantum information-theoretic model, where no assumptions are made on the computational power of the adversary. For the slightly weaker task of verifiable quantum secret sharing, we give a protocol which tolerates any t < n/4 cheating parties (out of n). This is shown to be optimal. We use this new tool to establish that any multi-party quantu...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of bench-marking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Party Members in Context. Social networks and local branches as context for party membership

OpenAIRE

Paulis, Emilien

2018-01-01

In this doctoral dissertation, I put party members and activists back in context. I stress theimportance of two contextual dimensions, often overlooked in the scientific literature. On theone hand, I put forward social network explanations of party membership and activism,emphasizing the importance of social interactions, relations and structures, which were scarcelyexplored as potential triggers. Like other forms of participation, party membership haspredominantly been portrayed through indi...

Benchmarking and the laboratory

Science.gov (United States)

Galloway, M; Nadin, L

2001-01-01

This article describes how benchmarking can be used to assess laboratory performance. Two benchmarking schemes are reviewed, the Clinical Benchmarking Company's Pathology Report and the College of American Pathologists' Q-Probes scheme. The Clinical Benchmarking Company's Pathology Report is undertaken by staff based in the clinical management unit, Keele University with appropriate input from the professional organisations within pathology. Five annual reports have now been completed. Each report is a detailed analysis of 10 areas of laboratory performance. In this review, particular attention is focused on the areas of quality, productivity, variation in clinical practice, skill mix, and working hours. The Q-Probes scheme is part of the College of American Pathologists programme in studies of quality assurance. The Q-Probes scheme and its applicability to pathology in the UK is illustrated by reviewing two recent Q-Probe studies: routine outpatient test turnaround time and outpatient test order accuracy. The Q-Probes scheme is somewhat limited by the small number of UK laboratories that have participated. In conclusion, as a result of the government's policy in the UK, benchmarking is here to stay. Benchmarking schemes described in this article are one way in which pathologists can demonstrate that they are providing a cost effective and high quality service. Key Words: benchmarking • pathology PMID:11477112

Benchmarking for Higher Education.

Science.gov (United States)

Jackson, Norman, Ed.; Lund, Helen, Ed.

The chapters in this collection explore the concept of benchmarking as it is being used and developed in higher education (HE). Case studies and reviews show how universities in the United Kingdom are using benchmarking to aid in self-regulation and self-improvement. The chapters are: (1) "Introduction to Benchmarking" (Norman Jackson…

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William L.; Trucano, Timothy G.

2008-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...... applications. The present study analyses voluntary benchmarking in a public setting that is oriented towards learning. The study contributes by showing how benchmarking can be mobilised for learning and offers evidence of the effects of such benchmarking for performance outcomes. It concludes that benchmarking...... can enable learning in public settings but that this requires actors to invest in ensuring that benchmark data are directed towards improvement....

Benchmarking van verkeersveiligheid : een inventarisatie en aanbevelingen voor de opzet van verkeersveiligheidsbenchmarks in Nederland.

NARCIS (Netherlands)

Aarts, L.T. & Bax, C.A.

2014-01-01

Benchmarking road safety; Stocktaking and recommendations for the development of road safety benchmarks in The Netherlands. Road safety policy has been decentralized in the Netherlands, giving regional and local governments a greater responsibility for road safety improvement in their jurisdiction.

Benchmark job – Watch out!

CERN Multimedia

Staff Association

2017-01-01

On 12 December 2016, in Echo No. 259, we already discussed at length the MERIT and benchmark jobs. Still, we find that a couple of issues warrant further discussion. Benchmark job – administrative decision on 1 July 2017 On 12 January 2017, the HR Department informed all staff members of a change to the effective date of the administrative decision regarding benchmark jobs. The benchmark job title of each staff member will be confirmed on 1 July 2017, instead of 1 May 2017 as originally announced in HR’s letter on 18 August 2016. Postponing the administrative decision by two months will leave a little more time to address the issues related to incorrect placement in a benchmark job. Benchmark job – discuss with your supervisor, at the latest during the MERIT interview In order to rectify an incorrect placement in a benchmark job, it is essential that the supervisor and the supervisee go over the assigned benchmark job together. In most cases, this placement has been done autom...

Party drugs - use and harm reduction.

Science.gov (United States)

Frei, Matthew

2010-08-01

Party drug use, the intermittent use of stimulants, ecstasy and so-called 'designer drugs' at dance parties or 'raves', is now part of the culture of many young Australians. This article discusses the risks associated with the use of 'party drugs' and describes an useful approach to general practitioner assessment and management of patients who may be using party drugs. Party drug use is associated with a range of harms, including risks associated with behaviour while drug affected, toxicity and overdose, mental health complications and physical morbidity. Multiple substance use, particularly combining sedatives, further amplifies risk. If GPs have some understanding of these drugs and their effects, they are well placed to provide an effective intervention in party drug users by supporting the reduction of harm.

Benchmarking reference services: an introduction.

Science.gov (United States)

Marshall, J G; Buchanan, H S

1995-01-01

Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

Third-party punishment increases cooperation in children through (misaligned) expectations and conditional cooperation.

Science.gov (United States)

Lergetporer, Philipp; Angerer, Silvia; Glätzle-Rützler, Daniela; Sutter, Matthias

2014-05-13

The human ability to establish cooperation, even in large groups of genetically unrelated strangers, depends upon the enforcement of cooperation norms. Third-party punishment is one important factor to explain high levels of cooperation among humans, although it is still somewhat disputed whether other animal species also use this mechanism for promoting cooperation. We study the effectiveness of third-party punishment to increase children's cooperative behavior in a large-scale cooperation game. Based on an experiment with 1,120 children, aged 7 to 11 y, we find that the threat of third-party punishment more than doubles cooperation rates, despite the fact that children are rarely willing to execute costly punishment. We can show that the higher cooperation levels with third-party punishment are driven by two components. First, cooperation is a rational (expected payoff-maximizing) response to incorrect beliefs about the punishment behavior of third parties. Second, cooperation is a conditionally cooperative reaction to correct beliefs that third party punishment will increase a partner's level of cooperation.

Internet based benchmarking

DEFF Research Database (Denmark)

Bogetoft, Peter; Nielsen, Kurt

2005-01-01

We discuss the design of interactive, internet based benchmarking using parametric (statistical) as well as nonparametric (DEA) models. The user receives benchmarks and improvement potentials. The user is also given the possibility to search different efficiency frontiers and hereby to explore...

Toxicological Benchmarks for Wildlife

Energy Technology Data Exchange (ETDEWEB)

Sample, B.E. Opresko, D.M. Suter, G.W.

1993-01-01

Ecological risks of environmental contaminants are evaluated by using a two-tiered process. In the first tier, a screening assessment is performed where concentrations of contaminants in the environment are compared to no observed adverse effects level (NOAEL)-based toxicological benchmarks. These benchmarks represent concentrations of chemicals (i.e., concentrations presumed to be nonhazardous to the biota) in environmental media (water, sediment, soil, food, etc.). While exceedance of these benchmarks does not indicate any particular level or type of risk, concentrations below the benchmarks should not result in significant effects. In practice, when contaminant concentrations in food or water resources are less than these toxicological benchmarks, the contaminants may be excluded from further consideration. However, if the concentration of a contaminant exceeds a benchmark, that contaminant should be retained as a contaminant of potential concern (COPC) and investigated further. The second tier in ecological risk assessment, the baseline ecological risk assessment, may use toxicological benchmarks as part of a weight-of-evidence approach (Suter 1993). Under this approach, based toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. Other sources of evidence include media toxicity tests, surveys of biota (abundance and diversity), measures of contaminant body burdens, and biomarkers. This report presents NOAEL- and lowest observed adverse effects level (LOAEL)-based toxicological benchmarks for assessment of effects of 85 chemicals on 9 representative mammalian wildlife species (short-tailed shrew, little brown bat, meadow vole, white-footed mouse, cottontail rabbit, mink, red fox, and whitetail deer) or 11 avian wildlife species (American robin, rough-winged swallow, American woodcock, wild turkey, belted kingfisher, great blue heron, barred owl, barn owl, Cooper's hawk, and red

Benchmarking in academic pharmacy departments.

Science.gov (United States)

Bosso, John A; Chisholm-Burns, Marie; Nappi, Jean; Gubbins, Paul O; Ross, Leigh Ann

2010-10-11

Benchmarking in academic pharmacy, and recommendations for the potential uses of benchmarking in academic pharmacy departments are discussed in this paper. Benchmarking is the process by which practices, procedures, and performance metrics are compared to an established standard or best practice. Many businesses and industries use benchmarking to compare processes and outcomes, and ultimately plan for improvement. Institutions of higher learning have embraced benchmarking practices to facilitate measuring the quality of their educational and research programs. Benchmarking is used internally as well to justify the allocation of institutional resources or to mediate among competing demands for additional program staff or space. Surveying all chairs of academic pharmacy departments to explore benchmarking issues such as department size and composition, as well as faculty teaching, scholarly, and service productivity, could provide valuable information. To date, attempts to gather this data have had limited success. We believe this information is potentially important, urge that efforts to gather it should be continued, and offer suggestions to achieve full participation.

2008 ULTRASONIC BENCHMARK STUDIES OF INTERFACE CURVATURE--A SUMMARY

International Nuclear Information System (INIS)

Schmerr, L. W.; Huang, R.; Raillon, R.; Mahaut, S.; Leymarie, N.; Lonne, S.; Song, S.-J.; Kim, H.-J.; Spies, M.; Lupien, V.

2009-01-01

In the 2008 QNDE ultrasonic benchmark session researchers from five different institutions around the world examined the influence that the curvature of a cylindrical fluid-solid interface has on the measured NDE immersion pulse-echo response of a flat-bottom hole (FBH) reflector. This was a repeat of a study conducted in the 2007 benchmark to try to determine the sources of differences seen in 2007 between model-based predictions and experiments. Here, we will summarize the results obtained in 2008 and analyze the model-based results and the experiments.

Which Party Gets the Mayoralty?

DEFF Research Database (Denmark)

Skjæveland, Asbjørn; Serritzlew, Søren

2010-01-01

expands the scope of these explanatory variables. However, the study also shows that being a large party is not sufficient for a party to have a good chance of winning the mayoralty. Furthermore, norms guiding appropriate behaviour seem important in addition to instrumental behaviour. It appears......In non-presidential multiparty systems, it is not only the voters but also coalition formation after the election that decides the government of the community. Some national-level studies investigate which parties are most likely to win the Prime Minister's office. The aim of this article...... is to investigate the same question at the local level:What makes a party more likely to win the post of mayor? The article finds that party size and change in size are important along with experience and ideological centrality. The results are similar to those obtained at the national level, and this study thus...

Party brands and voting

DEFF Research Database (Denmark)

Nielsen, Sigge Winther; Larsen, Martin Vinæs

2014-01-01

heuristics and voting models. Next, the article measures the brand value of Danish parties by utilizing a representative association analysis. Finally, this measure is used to conduct the very first empirical analysis of a party brand's effect on voting behavior. Overall, the primary finding demonstrates...

Benchmarking: applications to transfusion medicine.

Science.gov (United States)

Apelseth, Torunn Oveland; Molnar, Laura; Arnold, Emmy; Heddle, Nancy M

2012-10-01

Benchmarking is as a structured continuous collaborative process in which comparisons for selected indicators are used to identify factors that, when implemented, will improve transfusion practices. This study aimed to identify transfusion medicine studies reporting on benchmarking, summarize the benchmarking approaches used, and identify important considerations to move the concept of benchmarking forward in the field of transfusion medicine. A systematic review of published literature was performed to identify transfusion medicine-related studies that compared at least 2 separate institutions or regions with the intention of benchmarking focusing on 4 areas: blood utilization, safety, operational aspects, and blood donation. Forty-five studies were included: blood utilization (n = 35), safety (n = 5), operational aspects of transfusion medicine (n = 5), and blood donation (n = 0). Based on predefined criteria, 7 publications were classified as benchmarking, 2 as trending, and 36 as single-event studies. Three models of benchmarking are described: (1) a regional benchmarking program that collects and links relevant data from existing electronic sources, (2) a sentinel site model where data from a limited number of sites are collected, and (3) an institutional-initiated model where a site identifies indicators of interest and approaches other institutions. Benchmarking approaches are needed in the field of transfusion medicine. Major challenges include defining best practices and developing cost-effective methods of data collection. For those interested in initiating a benchmarking program, the sentinel site model may be most effective and sustainable as a starting point, although the regional model would be the ideal goal. Copyright © 2012 Elsevier Inc. All rights reserved.

An Empirical Investigation into the Matching Problems among Game Theoretically Coordinating Parties in a Virtual Organization

Directory of Open Access Journals (Sweden)

Muhammad Yasir

2010-09-01

Full Text Available Virtual organization emerged as a highly flexible structure in response to the rapidly changing environment of 20th century. This organization consists of independently working parties that combine their best possible resources to exploit the emerging market opportunities. There are no formal control and coordination mechanisms employed by the classical hierarchical structures. Parties, therefore, manage their dependencies on each other through mutual understanding and trust.Mathematician John Nash, having significant contributions in Game Theory suggests that in every non-cooperative game there is at least one equilibrium point. At this point, according to him, every strategy of the player represents a response to the others’ strategies. Such equilibria could exist in a virtual organization, at which parties coordinate which each other to optimize their performance.Coordination/Matching problems are likely to arise among game theoretically coordinating parties in a virtual organization, mainly due to lack of binding agreements. By identifying and resolving these matching problems, virtual organizations could achieve efficiency and better coordination among parties.  

Benchmarking: A tool for conducting self-assessment

International Nuclear Information System (INIS)

Perkey, D.N.

1992-01-01

There is more information on nuclear plant performance available than can reasonably be assimilated and used effectively by plant management or personnel responsible for self-assessment. Also, it is becoming increasingly more important that an effective self-assessment program uses internal parameters not only to evaluate performance, but to incorporate lessons learned from other plants. Because of the quantity of information available, it is important to focus efforts and resources in areas where safety or performance is a concern and where the most improvement can be realized. One of the techniques that is being used to effectively accomplish this is benchmarking. Benchmarking involves the use of various sources of information to self-identify a plant's strengths and weaknesses, identify which plants are strong performers in specific areas, evaluate what makes a top performer, and incorporate the success factors into existing programs. The formality with which benchmarking is being implemented varies widely depending on the objective. It can be as simple as looking at a single indicator, such as systematic assessment of licensee performance (SALP) in engineering and technical support, then surveying the top performers with specific questions. However, a more comprehensive approach may include the performance of a detailed benchmarking study. Both operational and economic indicators may be used in this type of evaluation. Some of the indicators that may be considered and the limitations of each are discussed

[Biological risk in health. Risk to third parties: medical-legal focus. Responsible behavior of the competent physician].

Science.gov (United States)

Rodriguez, Daniele

2010-01-01

The responsibility of the occupational physician (OP) is discussed within the particular topic of biological risk generated by health care workers (HCW) versus third parties in health care settings. The present contribution offers keys of interpretation regarding current Italian legislation and passed sentences, taking into account principles of occupational medicine, the ICOH code of ethics for occupational health professionals, as well as duties and tasks of OP, employers and employees. Most of the responsibilities stand on employers, but OP has a primary duty of information and to judge fitness for work. It is underlined the difficult interpretation of the current legislation and indications. Behaviour of the OP could be censored in case of particular fitness for work or in case of inadequate information, as well as if the comprehension of information is not verified or when indication to minimize the risk are not controlled.

Sensitivity Analysis of OECD Benchmark Tests in BISON

Energy Technology Data Exchange (ETDEWEB)

Swiler, Laura Painton [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gamble, Kyle [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schmidt, Rodney C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williamson, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

This report summarizes a NEAMS (Nuclear Energy Advanced Modeling and Simulation) project focused on sensitivity analysis of a fuels performance benchmark problem. The benchmark problem was defined by the Uncertainty Analysis in Modeling working group of the Nuclear Science Committee, part of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD ). The benchmark problem involv ed steady - state behavior of a fuel pin in a Pressurized Water Reactor (PWR). The problem was created in the BISON Fuels Performance code. Dakota was used to generate and analyze 300 samples of 17 input parameters defining core boundary conditions, manuf acturing tolerances , and fuel properties. There were 24 responses of interest, including fuel centerline temperatures at a variety of locations and burnup levels, fission gas released, axial elongation of the fuel pin, etc. Pearson and Spearman correlatio n coefficients and Sobol' variance - based indices were used to perform the sensitivity analysis. This report summarizes the process and presents results from this study.

Stakeholder insights on the planning and development of an independent benchmark standard for responsible food marketing.

Science.gov (United States)

Cairns, Georgina; Macdonald, Laura

2016-06-01

A mixed methods qualitative survey investigated stakeholder responses to the proposal to develop an independently defined, audited and certifiable set of benchmark standards for responsible food marketing. Its purpose was to inform the policy planning and development process. A majority of respondents were supportive of the proposal. A majority also viewed the engagement and collaboration of a broad base of stakeholders in its planning and development as potentially beneficial. Positive responses were associated with views that policy controls can and should be extended to include all form of marketing, that obesity and non-communicable diseases prevention and control was a shared responsibility and an urgent policy priority and prior experience of independent standardisation as a policy lever for good practice. Strong policy leadership, demonstrable utilisation of the evidence base in its development and deployment and a conceptually clear communications plan were identified as priority targets for future policy planning. Future research priorities include generating more evidence on the feasibility of developing an effective community of practice and theory of change, the strengths and limitations of these and developing an evidence-based step-wise communications strategy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Party Organizational Change: Formal Distribution of Power between National and Regional Levels in Italian Political Parties (1991-2012

Directory of Open Access Journals (Sweden)

Enrico Calossi

2015-03-01

Full Text Available In the last 20 years an increasing number of scholars have centred their attention on the relationships between party national structures and party sub-national branches. A relevant part of the specialized literature has interpreted party change as the by-product of the denationalization of party politics. The aim of this contribution is to investigate to what extent eight relevant Italian parties have followed patterns of organizational change, after the reforms of the municipal, provincial and regional election sys-tems; and the process of devolution of administrative powers begun during the Nineties. By focusing on two analytical dimensions (the level of involvement and the level of autonomy of party regional units, we analyse diachronically continuity and change in party formal organization, through an in-depth analysis of the statutes adopted from 1992 to 2012

Piping benchmark problems for the ABB/CE System 80+ Standardized Plant

International Nuclear Information System (INIS)

Bezler, P.; DeGrassi, G.; Braverman, J.; Wang, Y.K.

1994-07-01

To satisfy the need for verification of the computer programs and modeling techniques that will be used to perform the final piping analyses for the ABB/Combustion Engineering System 80+ Standardized Plant, three benchmark problems were developed. The problems are representative piping systems subjected to representative dynamic loads with solutions developed using the methods being proposed for analysis for the System 80+ standard design. It will be required that the combined license licensees demonstrate that their solution to these problems are in agreement with the benchmark problem set. The first System 80+ piping benchmark is a uniform support motion response spectrum solution for one section of the feedwater piping subjected to safe shutdown seismic loads. The second System 80+ piping benchmark is a time history solution for the feedwater piping subjected to the transient loading induced by a water hammer. The third System 80+ piping benchmark is a time history solution of the pressurizer surge line subjected to the accelerations induced by a main steam line pipe break. The System 80+ reactor is an advanced PWR type

EGS4 benchmark program

International Nuclear Information System (INIS)

Yasu, Y.; Hirayama, H.; Namito, Y.; Yashiro, S.

1995-01-01

This paper proposes EGS4 Benchmark Suite which consists of three programs called UCSAMPL4, UCSAMPL4I and XYZDOS. This paper also evaluates optimization methods of recent RISC/UNIX systems, such as IBM, HP, DEC, Hitachi and Fujitsu, for the benchmark suite. When particular compiler option and math library were included in the evaluation process, system performed significantly better. Observed performance of some of the RISC/UNIX systems were beyond some so-called Mainframes of IBM, Hitachi or Fujitsu. The computer performance of EGS4 Code System on an HP9000/735 (99MHz) was defined to be the unit of EGS4 Unit. The EGS4 Benchmark Suite also run on various PCs such as Pentiums, i486 and DEC alpha and so forth. The performance of recent fast PCs reaches that of recent RISC/UNIX systems. The benchmark programs have been evaluated with correlation of industry benchmark programs, namely, SPECmark. (author)

Review of Seismic Evaluation Methodologies for Nuclear Power Plants Based on a Benchmark Exercise

International Nuclear Information System (INIS)

2013-11-01

Niigataken-chuetsu-oki (NCO) earthquake (Mw = 6.6) occurred on 16 July 2007 and affected the Kashiwazaki-Kariwa (K-K) NPP in Japan. Although there was significant loss of main shock data due to transmission problems, a significant number of instruments were still able to measure the acceleration at different locations in soil (boreholes) and in structures at the K-K NPP during the main shock and the aftershocks. The availability of all these instrumental data provided an excellent background for initiating a benchmarking exercise known as the KAshiwazaki-Kariwa Research Initiative for Seismic Margin Assessment (KARISMA). The main objective of the KARISMA benchmark exercise is to study a comparison between analytical seismic response versus real response of selected structure, system and components (SSCs) of K-K NPP Unit 7. The KARISMA benchmark exercise includes benchmarking the analytical tools and numerical simulation techniques used for predicting seismic response of NPP structures (in linear and non-linear ranges), site response, soil-structure interaction phenomena, seismic response of piping systems, 'sloshing' in the spent fuel pool and buckling of tanks. The benchmark is primarily based on data provided by Tokyo Electric Power Company (TEPCO). It is not linked to the seismic re-evaluation of K-K NPP carried out by TEPCO. Twenty-one organizations, comprising researchers, operating organizations, regulatory authorities, vendors and technical support organizations from 14 countries, participated in the benchmarking exercises. This publication, including a CD-ROM, summarizes the analyses of the main results of the benchmarking exercise for the K-K NPP reactor building (including static and modal analyses of the fixed base model, soil column analyses, analyses of the soil-structure models and margin assessment of the K-K NPP reactor building), the analyses of the main results of the benchmarking exercise for the residual heat removal piping system (including

Benchmarking ENDF/B-VII.0

International Nuclear Information System (INIS)

Marck, Steven C. van der

2006-01-01

The new major release VII.0 of the ENDF/B nuclear data library has been tested extensively using benchmark calculations. These were based upon MCNP-4C3 continuous-energy Monte Carlo neutronics simulations, together with nuclear data processed using the code NJOY. Three types of benchmarks were used, viz., criticality safety benchmarks (fusion) shielding benchmarks, and reference systems for which the effective delayed neutron fraction is reported. For criticality safety, more than 700 benchmarks from the International Handbook of Criticality Safety Benchmark Experiments were used. Benchmarks from all categories were used, ranging from low-enriched uranium, compound fuel, thermal spectrum ones (LEU-COMP-THERM), to mixed uranium-plutonium, metallic fuel, fast spectrum ones (MIX-MET-FAST). For fusion shielding many benchmarks were based on IAEA specifications for the Oktavian experiments (for Al, Co, Cr, Cu, LiF, Mn, Mo, Si, Ti, W, Zr), Fusion Neutronics Source in Japan (for Be, C, N, O, Fe, Pb), and Pulsed Sphere experiments at Lawrence Livermore National Laboratory (for 6 Li, 7 Li, Be, C, N, O, Mg, Al, Ti, Fe, Pb, D 2 O, H 2 O, concrete, polyethylene and teflon). For testing delayed neutron data more than thirty measurements in widely varying systems were used. Among these were measurements in the Tank Critical Assembly (TCA in Japan) and IPEN/MB-01 (Brazil), both with a thermal spectrum, and two cores in Masurca (France) and three cores in the Fast Critical Assembly (FCA, Japan), all with fast spectra. In criticality safety, many benchmarks were chosen from the category with a thermal spectrum, low-enriched uranium, compound fuel (LEU-COMP-THERM), because this is typical of most current-day reactors, and because these benchmarks were previously underpredicted by as much as 0.5% by most nuclear data libraries (such as ENDF/B-VI.8, JEFF-3.0). The calculated results presented here show that this underprediction is no longer there for ENDF/B-VII.0. The average over 257

Introduction of new road pavement response modelling software by means of benchmarking

CSIR Research Space (South Africa)

Maina, JW

2008-07-01

Full Text Available . Newly developed Finite Element Method for Pavement Analysis (FEMPA) software, which is currently only available for use in a research environment, is also benchmarked against these other packages. The results show that both the GAMES and FEMPA packages...

California commercial building energy benchmarking

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2003-07-01

Building energy benchmarking is the comparison of whole-building energy use relative to a set of similar buildings. It provides a useful starting point for individual energy audits and for targeting buildings for energy-saving measures in multiple-site audits. Benchmarking is of interest and practical use to a number of groups. Energy service companies and performance contractors communicate energy savings potential with ''typical'' and ''best-practice'' benchmarks while control companies and utilities can provide direct tracking of energy use and combine data from multiple buildings. Benchmarking is also useful in the design stage of a new building or retrofit to determine if a design is relatively efficient. Energy managers and building owners have an ongoing interest in comparing energy performance to others. Large corporations, schools, and government agencies with numerous facilities also use benchmarking methods to compare their buildings to each other. The primary goal of Task 2.1.1 Web-based Benchmarking was the development of a web-based benchmarking tool, dubbed Cal-Arch, for benchmarking energy use in California commercial buildings. While there were several other benchmarking tools available to California consumers prior to the development of Cal-Arch, there were none that were based solely on California data. Most available benchmarking information, including the Energy Star performance rating, were developed using DOE's Commercial Building Energy Consumption Survey (CBECS), which does not provide state-level data. Each database and tool has advantages as well as limitations, such as the number of buildings and the coverage by type, climate regions and end uses. There is considerable commercial interest in benchmarking because it provides an inexpensive method of screening buildings for tune-ups and retrofits. However, private companies who collect and manage consumption data are concerned that the

Benchmarking in Foodservice Operations

National Research Council Canada - National Science Library

Johnson, Bonnie

1998-01-01

The objective of this study was to identify usage of foodservice performance measures, important activities in foodservice benchmarking, and benchmarking attitudes, beliefs, and practices by foodservice directors...

Benchmarking, benchmarks, or best practices? Applying quality improvement principles to decrease surgical turnaround time.

Science.gov (United States)

Mitchell, L

1996-01-01

The processes of benchmarking, benchmark data comparative analysis, and study of best practices are distinctly different. The study of best practices is explained with an example based on the Arthur Andersen & Co. 1992 "Study of Best Practices in Ambulatory Surgery". The results of a national best practices study in ambulatory surgery were used to provide our quality improvement team with the goal of improving the turnaround time between surgical cases. The team used a seven-step quality improvement problem-solving process to improve the surgical turnaround time. The national benchmark for turnaround times between surgical cases in 1992 was 13.5 minutes. The initial turnaround time at St. Joseph's Medical Center was 19.9 minutes. After the team implemented solutions, the time was reduced to an average of 16.3 minutes, an 18% improvement. Cost-benefit analysis showed a potential enhanced revenue of approximately $300,000, or a potential savings of $10,119. Applying quality improvement principles to benchmarking, benchmarks, or best practices can improve process performance. Understanding which form of benchmarking the institution wishes to embark on will help focus a team and use appropriate resources. Communicating with professional organizations that have experience in benchmarking will save time and money and help achieve the desired results.

Benchmarking of the FENDL-3 Neutron Cross-section Data Starter Library for Fusion Applications

Energy Technology Data Exchange (ETDEWEB)

Fischer, U., E-mail: ulrich.fischer@kit.edu [Association KIT-Euratom, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Angelone, M. [Associazione ENEA-Euratom, ENEA Fusion Division, Via E. Fermi 27, I-00044 Frascati (Italy); Bohm, T. [University of Wisconsin-Madison, 1500 Engineering Dr, Madison, WI 53706 (United States); Kondo, K. [Association KIT-Euratom, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Konno, C. [Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki-ken 319-1195 (Japan); Sawan, M. [University of Wisconsin-Madison, 1500 Engineering Dr, Madison, WI 53706 (United States); Villari, R. [Associazione ENEA-Euratom, ENEA Fusion Division, Via E. Fermi 27, I-00044 Frascati (Italy); Walker, B. [University of Wisconsin-Madison, 1500 Engineering Dr, Madison, WI 53706 (United States)

2014-06-15

This paper summarizes the benchmark analyses performed in a joint effort of ENEA (Italy), JAEA (Japan), KIT (Germany), and the University of Wisconsin (USA) on a computational ITER benchmark and a series of 14 MeV neutron benchmark experiments. The computational benchmark revealed a modest increase of the neutron flux levels in the deep penetration regions and a substantial increase of the gas production in steel components. The comparison to experimental results showed good agreement with no substantial differences between FENDL-3.0 and FENDL-2.1 for most of the responses. In general, FENDL-3 shows an improved performance for fusion neutronics applications.

A general theory of effect size, and its consequences for defining the benchmark response (BMR) for continuous endpoints.

Science.gov (United States)

Slob, Wout

2017-04-01

A general theory on effect size for continuous data predicts a relationship between maximum response and within-group variation of biological parameters, which is empirically confirmed by results from dose-response analyses of 27 different biological parameters. The theory shows how effect sizes observed in distinct biological parameters can be compared and provides a basis for a generic definition of small, intermediate and large effects. While the theory is useful for experimental science in general, it has specific consequences for risk assessment: it solves the current debate on the appropriate metric for the Benchmark response in continuous data. The theory shows that scaling the BMR expressed as a percent change in means to the maximum response (in the way specified) automatically takes "natural variability" into account. Thus, the theory supports the underlying rationale of the BMR 1 SD. For various reasons, it is, however, recommended to use a BMR in terms of a percent change that is scaled to maximum response and/or within group variation (averaged over studies), as a single harmonized approach.

Picturing the Party: Instagram and Party Campaigning in the 2014 Swedish Elections

Directory of Open Access Journals (Sweden)

Kirill Filimonov

2016-08-01

Full Text Available This article explores Swedish parties’ activities on Instagram during the 2014 elections. Understanding party campaign communication as highly strategic, that is, communication to persuade and mobilize voters in order to win the elections, we ask whether Instagram was used to (1 broadcast campaign messages, (2 mobilize supporters, (3 manage the party’s image, and (4 amplify and complement other campaign material (i.e., hybrid campaign use. With this study, we follow previous studies on the use of digital communication platforms in the hands of campaigning political actors, but we direct our attention to a new platform. We conducted a content analysis of 220 party postings on Instagram, collected during the hot phase of the campaign. The result shows that the platform was mainly used for broadcasting rather than for mobilization. The image the parties were presenting leaned toward personalization with a strong presence of top candidates in their postings. Top candidates were primarily displayed in a political/professional context. Finally, half of the analyzed postings showed signs of hybridized campaign practices. The presented findings give a first glimpse on how political parties use and perform on Instagram.

Benchmarking i den offentlige sektor

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Dietrichson, Lars; Sandalgaard, Niels

2008-01-01

I artiklen vil vi kort diskutere behovet for benchmarking i fraværet af traditionelle markedsmekanismer. Herefter vil vi nærmere redegøre for, hvad benchmarking er med udgangspunkt i fire forskellige anvendelser af benchmarking. Regulering af forsyningsvirksomheder vil blive behandlet, hvorefter...

Regional Competitive Intelligence: Benchmarking and Policymaking

OpenAIRE

Huggins , Robert

2010-01-01

Benchmarking exercises have become increasingly popular within the sphere of regional policymaking in recent years. The aim of this paper is to analyse the concept of regional benchmarking and its links with regional policymaking processes. It develops a typology of regional benchmarking exercises and regional benchmarkers, and critically reviews the literature, both academic and policy oriented. It is argued that critics who suggest regional benchmarking is a flawed concept and technique fai...

Ombuds’ corner: the third party, the institution

CERN Multimedia

Vincent Vuillemin

2012-01-01

“The Ombuds shall provide confidential assistance for the informal resolution of interpersonal issues, in the interests of the good functioning of CERN.”*   In any institution, conflicts are inevitable. They can, however, offer an opportunity for a positive resolution. Relationships in a workplace are generally better and stronger between people who have been able to reach a positive resolution of their disagreement, than they are between people who get along moderately well. However, in disputes involving two antagonistic parties, people often forget that there is actually a third party behind the scenes: the institution. It is sometimes surprising to see that even people holding management responsibilities or hierarchical positions in projects fight each other, and completely forget that they are accountable for the good functioning of CERN. Commitment and professionalism are part of the five priority values of CERN, as expressed in its Code of Conduct: “Promot...

Nuclear opponents and party politics

International Nuclear Information System (INIS)

Tollmann, A.

1987-01-01

The question treated in this article is: what do the members of the Austrian parliament - of the different parties - against nuclear energy, in particular against nuclear installations in neighbour countries? Of special interest is the Green party, now also represented in the parliament. The conclusion is that even this party, though in principle definitely anti-nuclear, is of no help to nuclear opponents in general, and to the Working Group No to Zwentendorf in particular. (qui)

Study of obligations defined in agreements between parties involved in clinical trials of medicinal products in Bulgaria.

Science.gov (United States)

N Getov, Ilko; Gocheva-Hristova, Tanya; Lebanova, Hristina V; Grigorov, Evgeni E

2012-08-01

To analyse and assess the legislative and contractual obligations of the parties involved in the conduct of clinical trials, with identification of the needs for comprehensive contractual regulation of their rights and responsibilities. This survey has been carried out by means of review, analysis of comprehensiveness, comparative legislative analysis and assessment of compliance with the legislation of sample of investigator and site agreements governing the process of conducting clinical trials. The survey comprises analyses of contractual relations between the sponsor of the study and the investigator, and between the sponsor of the study and the trial site, respectively, relevant to clinical trials which are actually conducted in Bulgaria at the time of and following the survey. Comparative method based on pre-defined structured indices was employed to outline the major variances in the volume of responsibilities and obligations of the said parties to the clinical trial, as regulated by the investigator and site agreements. The analysis of comprehensiveness showed evident omissions in the regulation of relations and interactions between the parties to the agreements. The detailed contractual regulation providing for the statutory obligations and responsibilities of the parties involved in the conduct of clinical trials is a good guarantee for proper understanding of the obligations of each party and for compliance with their relevant responsibilities in view of protecting the rights of the participants in the clinical trials - patients or healthy volunteers.

Third party financing of renewable energy sources

International Nuclear Information System (INIS)

IDAE.

1994-01-01

IDAE (Institute of Energy Saving and Diversification) Hosted the Third party on financing renewable energy sources. The meeting was articulated into chapters: 1.- Experiences in the renewable energy field. 2.- Third party financing of small hydro-power projects. 3.- Third party financing of biomass projects. 4.- Third party financing of wind energy projects

Third party Superfund lawsuit defense influenced by the choice of remediation method

International Nuclear Information System (INIS)

Haddad, B.I.; Parish, G.B.

1994-01-01

Paper Company A was sued in a third party action suit initiated by a local utility who was a potential responsible party (PRP) to a contaminated site regulated under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) program. In addition to Paper Company A, other parties to the third party suit included Paper Company B and Contractor C, a demolition contractor/waste hauler. Other PRPs included land owners where the contaminated debris was dumped, Mr. and Mrs. D. Based on background information, Paper Company A dumped coal ash, off quality feed stock, wood and trash north of the D-property. Paper Company B admitted dumping material north of the D-property. Samples of industrial sludges on the D-property had properties characteristic of the Paper Company B's sludges. Paper Company B dumped ash, chromium contaminated gypsum sludge and other waste. The utility company dumped ash on the D-property. Contractor C hauled demolition debris to the D property. A third PRP, Company E was the original owner of the buildings that were demolished. This PRP settled with the EPA as part of a bankruptcy settlement. The hazardous substances encountered at the site included PCBs, chromium and lead in the coal ash, demolition debris and industrial sludges. Disposal of material containing hazardous substances resulted in PCB contaminated debris and sediment, and chromium and lead contamination in the sediment, soil and groundwater

The niche party concept and its measurement

OpenAIRE

Meyer, Thomas M; Miller, Bernhard

2015-01-01

The concept of the niche party has become increasingly popular in analyses of party competition. Yet, existing approaches vary in their definitions and their measurement approaches. We propose using a minimal definition that allows us to compare political parties in terms of their ?nicheness?. We argue that the conceptual core of the niche party concept is based on issue emphasis and that a niche party emphasizes policy areas neglected by its rivals. Based on this definition, we propose a con...

The niche party concept and its measurement.

Science.gov (United States)

Meyer, Thomas M; Miller, Bernhard

2015-03-01

The concept of the niche party has become increasingly popular in analyses of party competition. Yet, existing approaches vary in their definitions and their measurement approaches. We propose using a minimal definition that allows us to compare political parties in terms of their 'nicheness'. We argue that the conceptual core of the niche party concept is based on issue emphasis and that a niche party emphasizes policy areas neglected by its rivals. Based on this definition, we propose a continuous measure that allows for more fine-grained measurement of a party's 'nicheness' than the dominant, dichotomous approaches and thereby limits the risk of measurement error. Drawing on data collected by the Comparative Manifesto Project, we show that (1) our measure has high face validity and (2) exposes differences among parties that are not captured by alternative, static or dichotomous measures.

Benchmarking Using Basic DBMS Operations

Science.gov (United States)

Crolotte, Alain; Ghazal, Ahmad

The TPC-H benchmark proved to be successful in the decision support area. Many commercial database vendors and their related hardware vendors used these benchmarks to show the superiority and competitive edge of their products. However, over time, the TPC-H became less representative of industry trends as vendors keep tuning their database to this benchmark-specific workload. In this paper, we present XMarq, a simple benchmark framework that can be used to compare various software/hardware combinations. Our benchmark model is currently composed of 25 queries that measure the performance of basic operations such as scans, aggregations, joins and index access. This benchmark model is based on the TPC-H data model due to its maturity and well-understood data generation capability. We also propose metrics to evaluate single-system performance and compare two systems. Finally we illustrate the effectiveness of this model by showing experimental results comparing two systems under different conditions.

High Energy Physics (HEP) benchmark program

International Nuclear Information System (INIS)

Yasu, Yoshiji; Ichii, Shingo; Yashiro, Shigeo; Hirayama, Hideo; Kokufuda, Akihiro; Suzuki, Eishin.

1993-01-01

High Energy Physics (HEP) benchmark programs are indispensable tools to select suitable computer for HEP application system. Industry standard benchmark programs can not be used for this kind of particular selection. The CERN and the SSC benchmark suite are famous HEP benchmark programs for this purpose. The CERN suite includes event reconstruction and event generator programs, while the SSC one includes event generators. In this paper, we found that the results from these two suites are not consistent. And, the result from the industry benchmark does not agree with either of these two. Besides, we describe comparison of benchmark results using EGS4 Monte Carlo simulation program with ones from two HEP benchmark suites. Then, we found that the result from EGS4 in not consistent with the two ones. The industry standard of SPECmark values on various computer systems are not consistent with the EGS4 results either. Because of these inconsistencies, we point out the necessity of a standardization of HEP benchmark suites. Also, EGS4 benchmark suite should be developed for users of applications such as medical science, nuclear power plant, nuclear physics and high energy physics. (author)

28 CFR 51.7 - Political parties.

Science.gov (United States)

2010-07-01

... THE VOTING RIGHTS ACT OF 1965, AS AMENDED General Provisions § 51.7 Political parties. Certain activities of political parties are subject to the preclearance requirement of section 5. A change affecting... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Political parties. 51.7 Section 51.7...

Benchmarking Tool Kit.

Science.gov (United States)

Canadian Health Libraries Association.

Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

An automated protocol for performance benchmarking a widefield fluorescence microscope.

Science.gov (United States)

Halter, Michael; Bier, Elianna; DeRose, Paul C; Cooksey, Gregory A; Choquette, Steven J; Plant, Anne L; Elliott, John T

2014-11-01

Widefield fluorescence microscopy is a highly used tool for visually assessing biological samples and for quantifying cell responses. Despite its widespread use in high content analysis and other imaging applications, few published methods exist for evaluating and benchmarking the analytical performance of a microscope. Easy-to-use benchmarking methods would facilitate the use of fluorescence imaging as a quantitative analytical tool in research applications, and would aid the determination of instrumental method validation for commercial product development applications. We describe and evaluate an automated method to characterize a fluorescence imaging system's performance by benchmarking the detection threshold, saturation, and linear dynamic range to a reference material. The benchmarking procedure is demonstrated using two different materials as the reference material, uranyl-ion-doped glass and Schott 475 GG filter glass. Both are suitable candidate reference materials that are homogeneously fluorescent and highly photostable, and the Schott 475 GG filter glass is currently commercially available. In addition to benchmarking the analytical performance, we also demonstrate that the reference materials provide for accurate day to day intensity calibration. Published 2014 Wiley Periodicals Inc. Published 2014 Wiley Periodicals Inc. This article is a US government work and, as such, is in the public domain in the United States of America.

A Global Vision over Benchmarking Process: Benchmarking Based Enterprises

OpenAIRE

Sitnikov, Catalina; Giurca Vasilescu, Laura

2008-01-01

Benchmarking uses the knowledge and the experience of others to improve the enterprise. Starting from the analysis of the performance and underlying the strengths and weaknesses of the enterprise it should be assessed what must be done in order to improve its activity. Using benchmarking techniques, an enterprise looks at how processes in the value chain are performed. The approach based on the vision “from the whole towards the parts” (a fragmented image of the enterprise’s value chain) redu...

Political parties and politics on the Internet: An analysis of the websites of Catalan political parties

Directory of Open Access Journals (Sweden)

Albert Padró-Solanet

2008-02-01

Full Text Available

The article analyses the use of New Information and Communications Technologies (NICT by the political parties, going beyond approaches focusing on the potential of these technologies for political transformation and renovation. In order to do this a set of variables that characterise the strategic position of the Catalan parties is employed: ideology, organisation and position in the electoral market. The analysis shows three different forms of usage of the Internet. One group of parties (PSC, CDC-CiU uses it to promote participation and campaigning activities; a second group (ICV, Cs, to generate new resources, and finally, a third group (PSC, ERC uses it to build contact networks. The size, and to a lesser degree the type of organisation, stand out as the major explanatory variables. The major parties use the Internet to promote campaign activities and participation; in contrast, smaller parties tend to make use of the Internet to generate new sources of financing and workforce. Depending on the type of organisation, the parties of the masses seem to be more likely to use the Internet to set up and activate an extensive contact network which recreates the characteristic associative realm of these parties in cyberspace.

Argonne Code Center: Benchmark problem book.

Energy Technology Data Exchange (ETDEWEB)

None, None

1977-06-01

This book is an outgrowth of activities of the Computational Benchmark Problems Committee of the Mathematics and Computation Division of the American Nuclear Society. This is the second supplement of the original benchmark book which was first published in February, 1968 and contained computational benchmark problems in four different areas. Supplement No. 1, which was published in December, 1972, contained corrections to the original benchmark book plus additional problems in three new areas. The current supplement. Supplement No. 2, contains problems in eight additional new areas. The objectives of computational benchmark work and the procedures used by the committee in pursuing the objectives are outlined in the original edition of the benchmark book (ANL-7416, February, 1968). The members of the committee who have made contributions to Supplement No. 2 are listed below followed by the contributors to the earlier editions of the benchmark book.

Benchmarking in Czech Higher Education

Directory of Open Access Journals (Sweden)

Plaček Michal

2015-12-01

Full Text Available The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Based on an analysis of the current situation and existing needs in the Czech Republic, as well as on a comparison with international experience, recommendations for public policy are made, which lie in the design of a model of a collaborative benchmarking for Czech economics and management in higher-education programs. Because the fully complex model cannot be implemented immediately – which is also confirmed by structured interviews with academics who have practical experience with benchmarking –, the final model is designed as a multi-stage model. This approach helps eliminate major barriers to the implementation of benchmarking.

Review of California and National Methods for Energy PerformanceBenchmarking of Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Matson, Nance E.; Piette, Mary Ann

2005-09-05

This benchmarking review has been developed to support benchmarking planning and tool development under discussion by the California Energy Commission (CEC), Lawrence Berkeley National Laboratory (LBNL) and others in response to the Governor's Executive Order S-20-04 (2004). The Executive Order sets a goal of benchmarking and improving the energy efficiency of California's existing commercial building stock. The Executive Order requires the CEC to propose ''a simple building efficiency benchmarking system for all commercial buildings in the state''. This report summarizes and compares two currently available commercial building energy-benchmarking tools. One tool is the U.S. Environmental Protection Agency's Energy Star National Energy Performance Rating System, which is a national regression-based benchmarking model (referred to in this report as Energy Star). The second is Lawrence Berkeley National Laboratory's Cal-Arch, which is a California-based distributional model (referred to as Cal-Arch). Prior to the time Cal-Arch was developed in 2002, there were several other benchmarking tools available to California consumers but none that were based solely on California data. The Energy Star and Cal-Arch benchmarking tools both provide California with unique and useful methods to benchmark the energy performance of California's buildings. Rather than determine which model is ''better'', the purpose of this report is to understand and compare the underlying data, information systems, assumptions, and outcomes of each model.

How to hold an ethical pox party.

Science.gov (United States)

Jamrozik, Euzebiusz

2018-04-01

Pox parties are a controversial alternative to vaccination for diseases such as chickenpox. Such parties involve parents infecting non-immune children by exposing them to a contagious child. If successful, infection will usually lead to immunity, thus preventing infection later in life, which, for several vaccine-preventable diseases, is more severe than childhood infection. Some may consider pox parties more morally objectionable than opting out of vaccination through non-medical exemptions. In this paper, I argue that this is not the case. Pox parties involve immediate risk of harm for children and reduce future harms, whereas opting out of vaccination places children at long-term risk of harms that increase with time, at least for some pathogens. Regarding harm to others through onward transmission of infection, this can be easily prevented in the case of pox parties-given the relatively controlled timing of infection-by quarantining attendees after the party, whereas opting out of vaccination involves risks to others that are more difficult to control. I defend three criteria for an ethical pox party: (1) that the disease is sufficiently low risk, (2) that parents consent to their child's attendance and (3) that children exposed to infection are quarantined and isolated appropriately. I argue that, if these criteria are met, pox parties are morally preferable to non-vaccination; such parties involve less risk to non-consenting others and, for some pathogens in some cases, even involve less risk for the children who participate. Thus, policies that permit non-medical exemption to vaccination should also permit ethical pox parties. Alternatively, if pox parties are not permitted, then vaccination should be mandated for those without medical contraindication. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

ANN-Benchmarks: A Benchmarking Tool for Approximate Nearest Neighbor Algorithms

DEFF Research Database (Denmark)

Aumüller, Martin; Bernhardsson, Erik; Faithfull, Alexander

2017-01-01

This paper describes ANN-Benchmarks, a tool for evaluating the performance of in-memory approximate nearest neighbor algorithms. It provides a standard interface for measuring the performance and quality achieved by nearest neighbor algorithms on different standard data sets. It supports several...... visualise these as images, Open image in new window plots, and websites with interactive plots. ANN-Benchmarks aims to provide a constantly updated overview of the current state of the art of k-NN algorithms. In the short term, this overview allows users to choose the correct k-NN algorithm and parameters...... for their similarity search task; in the longer term, algorithm designers will be able to use this overview to test and refine automatic parameter tuning. The paper gives an overview of the system, evaluates the results of the benchmark, and points out directions for future work. Interestingly, very different...

Benchmark calculations in multigroup and multidimensional time-dependent transport

International Nuclear Information System (INIS)

Ganapol, B.D.; Musso, E.; Ravetto, P.; Sumini, M.

1990-01-01

It is widely recognized that reliable benchmarks are essential in many technical fields in order to assess the response of any approximation to the physics of the problem to be treated and to verify the performance of the numerical methods used. The best possible benchmarks are analytical solutions to paradigmatic problems where no approximations are actually introduced and the only error encountered is connected to the limitations of computational algorithms. Another major advantage of analytical solutions is that they allow a deeper understanding of the physical features of the model, which is essential for the intelligent use of complicated codes. In neutron transport theory, the need for benchmarks is particularly great. In this paper, the authors propose to establish accurate numerical solutions to some problems concerning the migration of neutron pulses. Use will be made of the space asymptotic theory, coupled with a Laplace transformation inverted by a numerical technique directly evaluating the inversion integral

Benchmarking Swiss electricity grids

International Nuclear Information System (INIS)

Walti, N.O.; Weber, Ch.

2001-01-01

This extensive article describes a pilot benchmarking project initiated by the Swiss Association of Electricity Enterprises that assessed 37 Swiss utilities. The data collected from these utilities on a voluntary basis included data on technical infrastructure, investments and operating costs. These various factors are listed and discussed in detail. The assessment methods and rating mechanisms that provided the benchmarks are discussed and the results of the pilot study are presented that are to form the basis of benchmarking procedures for the grid regulation authorities under the planned Switzerland's electricity market law. Examples of the practical use of the benchmarking methods are given and cost-efficiency questions still open in the area of investment and operating costs are listed. Prefaces by the Swiss Association of Electricity Enterprises and the Swiss Federal Office of Energy complete the article

Intra-party policy entrepreneurship and party goals. The case of political parties’ climate policy preferences in Ireland

DEFF Research Database (Denmark)

Little, Conor

2017-01-01

This study contributes to the growing literature on the domestic politics of climate change by examining the climate policy preferences of Fianna Fáil, Fine Gael and the Labour Party over 20 years. Bringing the concept of ‘policy entrepreneurship’ into the study of intra-party politics, it uses...... who have engaged in policy entrepreneurship with the aim of strengthening their parties’ climate policy preferences. In instances where office-seeking incentives for climate policy have been strong, they have often contributed to changes in policy preferences, whether or not intra-party policy...... entrepreneurship has been present. Theoretically, the study argues that the concept of ‘policy entrepreneurship’ can be usefully borrowed from the public policy literature by researchers of party policy preferences and intra-party politics. Empirically, it adds to the small but growing body of research on climate...

Inheritance and the Dynamics of Party Identification

OpenAIRE

Kroh, Martin; Selb, Peter

2009-01-01

Extensive research efforts notwithstanding, scholars continue to disagree on the nature and meaning of party identification. Traditionalists conceive of partisanship as a largely affective attachment to a political party that emerges in childhood through parental influences and tends to persist throughout life. The revisionist conception of partisanship is that of a running tally of party utilities that is updated based on current party performance. We attempt to reconcile both schools of tho...

Benchmarking af kommunernes sagsbehandling

DEFF Research Database (Denmark)

Amilon, Anna

Fra 2007 skal Ankestyrelsen gennemføre benchmarking af kommuernes sagsbehandlingskvalitet. Formålet med benchmarkingen er at udvikle praksisundersøgelsernes design med henblik på en bedre opfølgning og at forbedre kommunernes sagsbehandling. Dette arbejdspapir diskuterer metoder for benchmarking...

KONSTRUKSI HUKUM PERLINDUNGAN ADHERED PARTY DALAM KONTRAK ADHESI YANG DIGUNAKAN DALAM TRANSAKSI BISNIS

Directory of Open Access Journals (Sweden)

Faizal Kurniawan

2014-09-01

Full Text Available Freedom of contract principle brings the contracting parties to sign into an agreement in such forms, including a standard contract. The standard contracts are made by one party, usually by business entities in the aim of doing efficiency. The contracts, however, potentially contains abuse of power in its application, known as adhesion contract. In term of adhesion contract, it contains prompt restrictions and/or transfer of responsibilities of the business risks to the adhered party. Therefore, good faith principle plays an important role to evaluate the implementation of the adhesion contract. This article discusses the adhesion contract in the light of the basic principles in contract law and explores the legal frameworks for adhered party to seek their contractual rights in conjunction with the implementation of the adhesion contract. We also compare the implementation of the adhesion contract, practically, both in Indonesia and international practices by examining the national laws and the model law e.g. Principles of International Commercial Contracts (PICC.

Party-state relationship, an effect of the political competition. The party system and patronage in Romanian politics

Directory of Open Access Journals (Sweden)

Irina Lonean

2012-06-01

Full Text Available The article examines the party-state relationship in post-communist Romania. It shows the connections between the existence of patronage, corruption and the states’ weak administrative capacity, on one hand, and the dynamics of the political party system, as an explanatory variable, on the other hand. The instability of the political parties in Romania and their changing relations within the system make the electorates’ task of anticipating and sanctioning their politics impossible. Consequently, the political parties have the possibility of extracting resources from the state without being held accountable in elections, as an effect of their dynamic, but non-robust competition.

Between Party, Parents and Peers

DEFF Research Database (Denmark)

Bregnbæk, Susanne

2012-01-01

This article explores the lived contradictions entailed in being a young member of the Chinese Communist Party (ccp) today. The focus is on how political and existential issues intersect. It explores party membership as a strategy for personal mobility among Beijing elite university students by p...

Third-party online payment solutions in China

OpenAIRE

Yang, Qian

2017-01-01

The topic of this paper is third-party online payment solutions in China and the main purpose of this paper is to figure out the research question: What are the impacts of third-party online payment solutions on China? Generally speaking, the third-party online payment solutions, including mobile payments, usually used by customer who purchase online and usually used in transaction platform. However, in China, people can use third-party payment solutions in different platfor...

Gender differences in Assessments of Party Leaders

DEFF Research Database (Denmark)

Kosiara-Pedersen, Karina; Hansen, Kasper Møller

2015-01-01

Is there a relationship between party leader gender and voters' assessments? Yes, according to theses on gender identity and stereotyping. A voter survey during the 2011 Danish general election allows for a comprehensive analysis of a less likely case with four male and four female party leaders...... of gender does not increase with age, actually, the opposite is the case among men since younger male voters have smaller sympathy for female party leaders. Furthermore, there is no support for the expectation that voters with more education or with higher levels of political interest and knowledge are more....... Female party leaders are assessed more positively by female voters than male voters both in regard to general party leader sympathy and assessment of specific characteristics, whereas it is not the case that male party leaders are assessed more positively by male voters than female voters. The impact...

MFTF TOTAL benchmark

International Nuclear Information System (INIS)

Choy, J.H.

1979-06-01

A benchmark of the TOTAL data base management system as applied to the Mirror Fusion Test Facility (MFTF) data base was implemented and run in February and March of 1979. The benchmark was run on an Interdata 8/32 and involved the following tasks: (1) data base design, (2) data base generation, (3) data base load, and (4) develop and implement programs to simulate MFTF usage of the data base

The Drill Down Benchmark

NARCIS (Netherlands)

P.A. Boncz (Peter); T. Rühl (Tim); F. Kwakkel

1998-01-01

textabstractData Mining places specific requirements on DBMS query performance that cannot be evaluated satisfactorily using existing OLAP benchmarks. The DD Benchmark - defined here - provides a practical case and yardstick to explore how well a DBMS is able to support Data Mining applications. It

DNA Mismatch Repair Deficiency in Rectal Cancer: Benchmarking Its Impact on Prognosis, Neoadjuvant Response Prediction, and Clinical Cancer Genetics.

Science.gov (United States)

de Rosa, Nicole; Rodriguez-Bigas, Miguel A; Chang, George J; Veerapong, Jula; Borras, Ester; Krishnan, Sunil; Bednarski, Brian; Messick, Craig A; Skibber, John M; Feig, Barry W; Lynch, Patrick M; Vilar, Eduardo; You, Y Nancy

2016-09-01

DNA mismatch repair deficiency (dMMR) hallmarks consensus molecular subtype 1 of colorectal cancer. It is being routinely tested, but little is known about dMMR rectal cancers. The efficacy of novel treatment strategies cannot be established without benchmarking the outcomes of dMMR rectal cancer with current therapy. We aimed to delineate the impact of dMMR on prognosis, the predicted response to fluoropyrimidine-based neoadjuvant therapy, and implications of germline alterations in the MMR genes in rectal cancer. Between 1992 and 2012, 62 patients with dMMR rectal cancers underwent multimodality therapy. Oncologic treatment and outcomes as well as clinical genetics work-up were examined. Overall and rectal cancer-specific survival were calculated by the Kaplan-Meier method. The median age at diagnosis was 41 years. MMR deficiency was most commonly due to alterations in MSH2 (53%) or MSH6 (23%). After a median follow-up of 6.8 years, the 5-year rectal cancer-specific survival was 100% for stage I and II, 85.1% for stage III, and 60.0% for stage IV disease. Fluoropyrimidine-based neoadjuvant chemoradiation was associated with a complete pathologic response rate of 27.6%. The extent of surgical resection was influenced by synchronous colonic disease at presentation, tumor height, clinical stage, and pelvic radiation. An informed decision for a limited resection focusing on proctectomy did not compromise overall survival. Five of the 11 (45.5%) deaths during follow-up were due to extracolorectal malignancies. dMMR rectal cancer had excellent prognosis and pathologic response with current multimodality therapy including an individualized surgical treatment plan. Identification of a dMMR rectal cancer should trigger germline testing, followed by lifelong surveillance for both colorectal and extracolorectal malignancies. We herein provide genotype-specific outcome benchmarks for comparison with novel interventions. © 2016 by American Society of Clinical Oncology.

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...

BUGLE-93 (ENDF/B-VI) cross-section library data testing using shielding benchmarks

International Nuclear Information System (INIS)

Hunter, H.T.; Slater, C.O.; White, J.E.

1994-01-01

Several integral shielding benchmarks were selected to perform data testing for new multigroup cross-section libraries compiled from the ENDF/B-VI data for light water reactor (LWR) shielding and dosimetry. The new multigroup libraries, BUGLE-93 and VITAMIN-B6, were studied to establish their reliability and response to the benchmark measurements by use of radiation transport codes, ANISN and DORT. Also, direct comparisons of BUGLE-93 and VITAMIN-B6 to BUGLE-80 (ENDF/B-IV) and VITAMIN-E (ENDF/B-V) were performed. Some benchmarks involved the nuclides used in LWR shielding and dosimetry applications, and some were sensitive specific nuclear data, i.e. iron due to its dominant use in nuclear reactor systems and complex set of cross-section resonances. Five shielding benchmarks (four experimental and one calculational) are described and results are presented

SSI and structural benchmarks

International Nuclear Information System (INIS)

Philippacopoulos, A.J.; Miller, C.A.; Costantino, C.J.; Graves, H.

1987-01-01

This paper presents the latest results of the ongoing program entitled, Standard Problems for Structural Computer Codes, currently being worked on at BNL for the USNRC, Office of Nuclear Regulatory Research. During FY 1986, efforts were focussed on three tasks, namely, (1) an investigation of ground water effects on the response of Category I structures, (2) the Soil-Structure Interaction Workshop and (3) studies on structural benchmarks associated with Category I structures. The objective of the studies on ground water effects is to verify the applicability and the limitations of the SSI methods currently used by the industry in performing seismic evaluations of nuclear plants which are located at sites with high water tables. In a previous study by BNL (NUREG/CR-4588), it has been concluded that the pore water can influence significantly the soil-structure interaction process. This result, however, is based on the assumption of fully saturated soil profiles. Consequently, the work was further extended to include cases associated with variable water table depths. In this paper, results related to cut-off depths beyond which the pore water effects can be ignored in seismic calculations, are addressed. Comprehensive numerical data are given for soil configurations typical to those encountered in nuclear plant sites. These data were generated by using a modified version of the SLAM code which is capable of handling problems related to the dynamic response of saturated soils. Further, the paper presents some key aspects of the Soil-Structure Interaction Workshop (NUREG/CP-0054) which was held in Bethesda, MD on June 1, 1986. Finally, recent efforts related to the task on the structural benchmarks are described

Activities of working party on 'Subcritical core of accelerator-driven system' under the research committee on reactor physics of AESJ and JAERI

International Nuclear Information System (INIS)

Iwasaki, T.; Tsujimoto, K.; Nishihara, K.; Kitamura, Y.

2004-01-01

The Research Committee on Reactor Physics under the Atomic Energy Society of Japan and the Japan Atomic Energy Research Inst. organized the working party (ADS-WP) on S ubcritical Core of Accelerator-Driven System . The ADS-WP investigated reactor physics of subcriticality from the viewpoint of the accelerator driven system (ADS) since subcriticality has been almost studied from the viewpoint of critical safety. The working party was set in July 2001 and it worked for two years. The activities of the ADS-WP are (Work-I) theory of subcriticality, (Work-II) benchmark of subcritical core, (Work-III) setting of subcriticality level of ADS and (Work-JAO monitoring of subcriticality. These activities clarified about the important issues related to the subcriticality or the subcritical core from the wide ranges of theory, analysis, calculation, design and monitoring for ADS. The activities were already summarized and the report will be published in March 2004. (authors)

Benchmarking & European Sustainable Transport Policies

DEFF Research Database (Denmark)

Gudmundsson, H.

2003-01-01

, Benchmarking is one of the management tools that have recently been introduced in the transport sector. It is rapidly being applied to a wide range of transport operations, services and policies. This paper is a contribution to the discussion of the role of benchmarking in the future efforts to...... contribution to the discussions within the Eusponsored BEST Thematic Network (Benchmarking European Sustainable Transport) which ran from 2000 to 2003....

Benchmarking – A tool for judgment or improvement?

DEFF Research Database (Denmark)

Rasmussen, Grane Mikael Gregaard

2010-01-01

perceptions of benchmarking will be presented; public benchmarking and best practice benchmarking. These two types of benchmarking are used to characterize and discuss the Danish benchmarking system and to enhance which effects, possibilities and challenges that follow in the wake of using this kind......Change in construction is high on the agenda for the Danish government and a comprehensive effort is done in improving quality and efficiency. This has led to an initiated governmental effort in bringing benchmarking into the Danish construction sector. This paper is an appraisal of benchmarking...... as it is presently carried out in the Danish construction sector. Many different perceptions of benchmarking and the nature of the construction sector, lead to an uncertainty in how to perceive and use benchmarking, hence, generating an uncertainty in understanding the effects of benchmarking. This paper addresses...

Storage-Intensive Supercomputing Benchmark Study

Energy Technology Data Exchange (ETDEWEB)

Cohen, J; Dossa, D; Gokhale, M; Hysom, D; May, J; Pearce, R; Yoo, A

2007-10-30

Critical data science applications requiring frequent access to storage perform poorly on today's computing architectures. This project addresses efficient computation of data-intensive problems in national security and basic science by exploring, advancing, and applying a new form of computing called storage-intensive supercomputing (SISC). Our goal is to enable applications that simply cannot run on current systems, and, for a broad range of data-intensive problems, to deliver an order of magnitude improvement in price/performance over today's data-intensive architectures. This technical report documents much of the work done under LDRD 07-ERD-063 Storage Intensive Supercomputing during the period 05/07-09/07. The following chapters describe: (1) a new file I/O monitoring tool iotrace developed to capture the dynamic I/O profiles of Linux processes; (2) an out-of-core graph benchmark for level-set expansion of scale-free graphs; (3) an entity extraction benchmark consisting of a pipeline of eight components; and (4) an image resampling benchmark drawn from the SWarp program in the LSST data processing pipeline. The performance of the graph and entity extraction benchmarks was measured in three different scenarios: data sets residing on the NFS file server and accessed over the network; data sets stored on local disk; and data sets stored on the Fusion I/O parallel NAND Flash array. The image resampling benchmark compared performance of software-only to GPU-accelerated. In addition to the work reported here, an additional text processing application was developed that used an FPGA to accelerate n-gram profiling for language classification. The n-gram application will be presented at SC07 at the High Performance Reconfigurable Computing Technologies and Applications Workshop. The graph and entity extraction benchmarks were run on a Supermicro server housing the NAND Flash 40GB parallel disk array, the Fusion-io. The Fusion system specs are as follows

BONFIRE: benchmarking computers and computer networks

OpenAIRE

Bouckaert, Stefan; Vanhie-Van Gerwen, Jono; Moerman, Ingrid; Phillips, Stephen; Wilander, Jerker

2011-01-01

The benchmarking concept is not new in the field of computing or computer networking. With “benchmarking tools”, one usually refers to a program or set of programs, used to evaluate the performance of a solution under certain reference conditions, relative to the performance of another solution. Since the 1970s, benchmarking techniques have been used to measure the performance of computers and computer networks. Benchmarking of applications and virtual machines in an Infrastructure-as-a-Servi...

The Isprs Benchmark on Indoor Modelling

Science.gov (United States)

Khoshelham, K.; Díaz Vilariño, L.; Peter, M.; Kang, Z.; Acharya, D.

2017-09-01

Automated generation of 3D indoor models from point cloud data has been a topic of intensive research in recent years. While results on various datasets have been reported in literature, a comparison of the performance of different methods has not been possible due to the lack of benchmark datasets and a common evaluation framework. The ISPRS benchmark on indoor modelling aims to address this issue by providing a public benchmark dataset and an evaluation framework for performance comparison of indoor modelling methods. In this paper, we present the benchmark dataset comprising several point clouds of indoor environments captured by different sensors. We also discuss the evaluation and comparison of indoor modelling methods based on manually created reference models and appropriate quality evaluation criteria. The benchmark dataset is available for download at: html"target="_blank">http://www2.isprs.org/commissions/comm4/wg5/benchmark-on-indoor-modelling.html.

So Close But So Far: Voting Propensity and Party Choice for Left-�Wing Parties

DEFF Research Database (Denmark)

Bochsler, Daniel; Sciarini, Pascal

2010-01-01

While the bulk of the literature focuses on the vote for parties from different blocs, the purpose of our article is to study the vote for two parties that are ideologically very close to each other: The Social Democrats and the Greens in Switzerland. To that end, we develop a two-step model, where...... voters first make a selection of parties that are acceptable to them and then make their electoral choice out of this set of acceptable al- ternatives. We use voting propensities as a measure of the first, consideration step and we show that they strongly depend on the distance between voters and parties...... on the Left–Right scale. With regard to the second, choice stage of the electoral process we hypothesize about the factors that may account for the varying ability of the two par- ties to convert potential voters into real voters. Our empirical tests provide encourag- ing support for our hypotheses regarding...

Benchmarking the energy efficiency of commercial buildings

International Nuclear Information System (INIS)

Chung, William; Hui, Y.V.; Lam, Y. Miu

2006-01-01

Benchmarking energy-efficiency is an important tool to promote the efficient use of energy in commercial buildings. Benchmarking models are mostly constructed in a simple benchmark table (percentile table) of energy use, which is normalized with floor area and temperature. This paper describes a benchmarking process for energy efficiency by means of multiple regression analysis, where the relationship between energy-use intensities (EUIs) and the explanatory factors (e.g., operating hours) is developed. Using the resulting regression model, these EUIs are then normalized by removing the effect of deviance in the significant explanatory factors. The empirical cumulative distribution of the normalized EUI gives a benchmark table (or percentile table of EUI) for benchmarking an observed EUI. The advantage of this approach is that the benchmark table represents a normalized distribution of EUI, taking into account all the significant explanatory factors that affect energy consumption. An application to supermarkets is presented to illustrate the development and the use of the benchmarking method

Complete Fairness in Secure Two-Party Computation

DEFF Research Database (Denmark)

Gordon, S. Dov; Hazay, Carmit; Katz, Jonathan

2011-01-01

In the setting of secure two-party computation, two mutually distrusting parties wish to compute some function of their inputs while preserving, to the extent possible, various security properties such as privacy, correctness, and more. One desirable property is fairness which guarantees, informa...... for such functions must have round complexity super-logarithmic in the security parameter. Our results demonstrate that the question of completely fair secure computation without an honest majority is far from closed.......In the setting of secure two-party computation, two mutually distrusting parties wish to compute some function of their inputs while preserving, to the extent possible, various security properties such as privacy, correctness, and more. One desirable property is fairness which guarantees......-party setting. We demonstrate that this folklore belief is false by showing completely fair protocols for various nontrivial functions in the two-party setting based on standard cryptographic assumptions. We first show feasibility of obtaining complete fairness when computing any function over polynomial...

Numisheet2005 Benchmark Analysis on Forming of an Automotive Underbody Cross Member: Benchmark 2

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao Jian

2005-01-01

This report presents an international cooperation benchmark effort focusing on simulations of a sheet metal stamping process. A forming process of an automotive underbody cross member using steel and aluminum blanks is used as a benchmark. Simulation predictions from each submission are analyzed via comparison with the experimental results. A brief summary of various models submitted for this benchmark study is discussed. Prediction accuracy of each parameter of interest is discussed through the evaluation of cumulative errors from each submission

SKaMPI: A Comprehensive Benchmark for Public Benchmarking of MPI

Directory of Open Access Journals (Sweden)

Ralf Reussner

2002-01-01

Full Text Available The main objective of the MPI communication library is to enable portable parallel programming with high performance within the message-passing paradigm. Since the MPI standard has no associated performance model, and makes no performance guarantees, comprehensive, detailed and accurate performance figures for different hardware platforms and MPI implementations are important for the application programmer, both for understanding and possibly improving the behavior of a given program on a given platform, as well as for assuring a degree of predictable behavior when switching to another hardware platform and/or MPI implementation. We term this latter goal performance portability, and address the problem of attaining performance portability by benchmarking. We describe the SKaMPI benchmark which covers a large fraction of MPI, and incorporates well-accepted mechanisms for ensuring accuracy and reliability. SKaMPI is distinguished among other MPI benchmarks by an effort to maintain a public performance database with performance data from different hardware platforms and MPI implementations.

Development of an integrated energy benchmark for a multi-family housing complex using district heating

International Nuclear Information System (INIS)

Jeong, Jaewook; Hong, Taehoon; Ji, Changyoon; Kim, Jimin; Lee, Minhyun; Jeong, Kwangbok

2016-01-01

Highlights: • The energy benchmarks for MFHC using district heating were developed. • We consider heating, hot water, electricity, and water energy consumption. • The benchmarks cover the site EUI, source EUI, and CO_2 emission intensity. • The benchmarks were developed through data mining and statistical methodologies. • The developed benchmarks provide fair criteria to evaluate energy efficiency. - Abstract: The reliable benchmarks are required to evaluate building energy efficiency fairly. This study aims to develop the energy benchmarks and relevant process for a multi-family housing complex (MFHC), which is responsible for huge CO_2 emissions in South Korea. A database, including the information on building attributes and energy consumption of 503 MFHCs, was established. The database was classified into three groups based on average enclosed area per household (AEA) through data mining techniques. The benchmarks of site energy use intensity (EUI), source EUI, and CO_2 emission intensity (CEI) were developed from Groups 1, 2, and 3. Representatively, the developed benchmarks of CEI for Groups 1, 2, and 3 were 28.17, 24.16, and 20.96 kg-CO_2/m"2 y, respectively. A comparative analysis using the operational rating identified that the developed benchmarks could solve the irrationality of the original benchmarks from overall database. In the case of the original benchmarks, 93% of small-AEA-groups and 16% of large-AEA-groups received lower grades. In the case of the developed benchmark, the upper and lower grades in Groups 1–3 were both adjusted to 50%. The proposed process for developing energy benchmark is applicable to evaluate the energy efficiency of other buildings, in other regions.

Analysis of a computational benchmark for a high-temperature reactor using SCALE

International Nuclear Information System (INIS)

Goluoglu, S.

2006-01-01

Several proposed advanced reactor concepts require methods to address effects of double heterogeneity. In doubly heterogeneous systems, heterogeneous fuel particles in a moderator matrix form the fuel region of the fuel element and thus constitute the first level of heterogeneity. Fuel elements themselves are also heterogeneous with fuel and moderator or reflector regions, forming the second level of heterogeneity. The fuel elements may also form regular or irregular lattices. A five-phase computational benchmark for a high-temperature reactor (HTR) fuelled with uranium or reactor-grade plutonium has been defined by the Organization for Economic Cooperation and Development, Nuclear Energy Agency (OECD NEA), Nuclear Science Committee, Working Party on the Physics of Plutonium Fuels and Innovative Fuel Cycles. This paper summarizes the analysis results using the latest SCALE code system (to be released in CY 2006 as SCALE 5.1). (authors)

Runtime party switch in an inter-organizational collaboration

NARCIS (Netherlands)

Pourmirza, S.

2016-01-01

During the execution of an inter-organizational business-to-business (B2B) collaboration, a collaborating party may drop out for technical reasons or for business reasons. In such a case, the leaving party must be replaced, at runtime, by a new party. Ideally, the new party can pick up where the old

Entropy-based benchmarking methods

NARCIS (Netherlands)

Temurshoev, Umed

2012-01-01

We argue that benchmarking sign-volatile series should be based on the principle of movement and sign preservation, which states that a bench-marked series should reproduce the movement and signs in the original series. We show that the widely used variants of Denton (1971) method and the growth

Power reactor pressure vessel benchmarks

International Nuclear Information System (INIS)

Rahn, F.J.

1978-01-01

A review is given of the current status of experimental and calculational benchmarks for use in understanding the radiation embrittlement effects in the pressure vessels of operating light water power reactors. The requirements of such benchmarks for application to pressure vessel dosimetry are stated. Recent developments in active and passive neutron detectors sensitive in the ranges of importance to embrittlement studies are summarized and recommendations for improvements in the benchmark are made. (author)

Shielding benchmark problems, (2)

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Shin, Kazuo; Tada, Keiko.

1980-02-01

Shielding benchmark problems prepared by Working Group of Assessment of Shielding Experiments in the Research Committee on Shielding Design in the Atomic Energy Society of Japan were compiled by Shielding Laboratory in Japan Atomic Energy Research Institute. Fourteen shielding benchmark problems are presented newly in addition to twenty-one problems proposed already, for evaluating the calculational algorithm and accuracy of computer codes based on discrete ordinates method and Monte Carlo method and for evaluating the nuclear data used in codes. The present benchmark problems are principally for investigating the backscattering and the streaming of neutrons and gamma rays in two- and three-dimensional configurations. (author)

Electricity consumption in school buildings - benchmark and web tools; Elforbrug i skoler - benchmark og webvaerktoej

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The aim of this project has been to produce benchmarks for electricity consumption in Danish schools in order to encourage electricity conservation. An internet programme has been developed with the aim of facilitating schools' access to benchmarks and to evaluate energy consumption. The overall purpose is to create increased attention to the electricity consumption of each separate school by publishing benchmarks which take the schools' age and number of pupils as well as after school activities into account. Benchmarks can be used to make green accounts and work as markers in e.g. energy conservation campaigns, energy management and for educational purposes. The internet tool can be found on www.energiguiden.dk. (BA)

45 CFR 99.22 - Rights of parties.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Rights of parties. 99.22 Section 99.22 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROCEDURE FOR HEARINGS FOR THE CHILD CARE AND DEVELOPMENT FUND Hearing Procedures § 99.22 Rights of parties. All parties may: (a...

When can we trust a third party?

NARCIS (Netherlands)

Hee, van K.M.; Sidorova, N.; Werf, van der J.M.E.M.; Koutny, M.; Aalst, van der W.M.P.; Yakovlev, A.

2013-01-01

Organizations often do not want to reveal the way a product is created or a service is delivered. As a consequence, if two organizations want to cooperate, they contact a trusted third party. Each specifies how it wants to communicate with the other party. The trusted third party then needs to

HS06 Benchmark for an ARM Server

Science.gov (United States)

Kluth, Stefan

2014-06-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

HS06 benchmark for an ARM server

International Nuclear Information System (INIS)

Kluth, Stefan

2014-01-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

26 CFR 301.7430-5 - Prevailing party.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Prevailing party. 301.7430-5 Section 301.7430-5... Prevailing party. (a) In general. For purposes of an award of reasonable administrative costs under section... prevailing party only if— (1) The position of the Internal Revenue Service was not substantially justified...

6 CFR 13.17 - Rights of parties.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Rights of parties. 13.17 Section 13.17 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.17 Rights of parties. Except as otherwise limited by this part, all parties may: (a) Be accompanied...

Performance Targets and External Benchmarking

DEFF Research Database (Denmark)

Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... as a market mechanism that can be brought inside the firm to provide incentives for continuous improvement and the development of competitive advances. However, whereas extant research primarily has focused on the importance and effects of using external benchmarks, less attention has been directed towards...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...

IRPhEP-handbook, International Handbook of Evaluated Reactor Physics Benchmark Experiments

International Nuclear Information System (INIS)

Sartori, Enrico; Blair Briggs, J.

2008-01-01

experimental series that were performed at 17 different reactor facilities. The Handbook is organized in a manner that allows easy inclusion of additional evaluations, as they become available. Additional evaluations are in progress and will be added to the handbook periodically. Content: FUND - Fundamental; GCR - Gas Cooled (Thermal) Reactor; HWR - Heavy Water Moderated Reactor; LMFR - Liquid Metal Fast Reactor; LWR - Light Water Moderated Reactor; PWR - Pressurized Water Reactor; VVER - VVER Reactor; Evaluations published as drafts 2 - Related Information: International Criticality Safety Benchmark Evaluation Project (ICSBEP); IRPHE/B and W-SS-LATTICE, Spectral Shift Reactor Lattice Experiments; IRPHE-JAPAN, Reactor Physics Experiments carried out in Japan ; IRPHE/JOYO MK-II, JOYO MK-II core management and characteristics database ; IRPhE/RRR-SEG, Reactor Physics Experiments from Fast-Thermal Coupled Facility; IRPHE-SNEAK, KFK SNEAK Fast Reactor Experiments, Primary Documentation ; IRPhE/STEK, Reactor Physics Experiments from Fast-Thermal Coupled Facility ; IRPHE-ZEBRA, AEEW Fast Reactor Experiments, Primary Documentation ; IRPHE-DRAGON-DPR, OECD High Temperature Reactor Dragon Project, Primary Documents; IRPHE-ARCH-01, Archive of HTR Primary Documents ; IRPHE/AVR, AVR High Temperature Reactor Experience, Archival Documentation ; IRPHE-KNK-II-ARCHIVE, KNK-II fast reactor documents, power history and measured parameters; IRPhE/BERENICE, effective delayed neutron fraction measurements ; IRPhE-TAPIRO-ARCHIVE, fast neutron source reactor primary documents, reactor physics experiments. The International Handbook of Evaluated Reactor Physics Benchmark Experiments was prepared by a working party comprised of experienced reactor physics personnel from Belgium, Brazil, Canada, P.R. of China, Germany, Hungary, Japan, Republic of Korea, Russian Federation, Switzerland, United Kingdom, and the United States of America. The IRPhEP Handbook is available to authorised requesters from the

Benchmarking in Czech Higher Education

OpenAIRE

Plaček Michal; Ochrana František; Půček Milan

2015-01-01

The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Base...

Benchmark simulation models, quo vadis?

Science.gov (United States)

Jeppsson, U; Alex, J; Batstone, D J; Benedetti, L; Comas, J; Copp, J B; Corominas, L; Flores-Alsina, X; Gernaey, K V; Nopens, I; Pons, M-N; Rodríguez-Roda, I; Rosen, C; Steyer, J-P; Vanrolleghem, P A; Volcke, E I P; Vrecko, D

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, highlighting areas where knowledge may still be deficient and where new opportunities are emerging, and to propose potential avenues for future development and application of the general benchmarking framework and its associated tools. The paper focuses on the topics of temporal and spatial extension, process modifications within the WWTP, the realism of models, control strategy extensions and the potential for new evaluation tools within the existing benchmark system. We find that there are major opportunities for application within all of these areas, either from existing work already being done within the context of the benchmarking simulation models (BSMs) or applicable work in the wider literature. Of key importance is increasing capability, usability and transparency of the BSM package while avoiding unnecessary complexity.

A Seafloor Benchmark for 3-dimensional Geodesy

Science.gov (United States)

Chadwell, C. D.; Webb, S. C.; Nooner, S. L.

2014-12-01

We have developed an inexpensive, permanent seafloor benchmark to increase the longevity of seafloor geodetic measurements. The benchmark provides a physical tie to the sea floor lasting for decades (perhaps longer) on which geodetic sensors can be repeatedly placed and removed with millimeter resolution. Global coordinates estimated with seafloor geodetic techniques will remain attached to the benchmark allowing for the interchange of sensors as they fail or become obsolete, or for the sensors to be removed and used elsewhere, all the while maintaining a coherent series of positions referenced to the benchmark. The benchmark has been designed to free fall from the sea surface with transponders attached. The transponder can be recalled via an acoustic command sent from the surface to release from the benchmark and freely float to the sea surface for recovery. The duration of the sensor attachment to the benchmark will last from a few days to a few years depending on the specific needs of the experiment. The recovered sensors are then available to be reused at other locations, or again at the same site in the future. Three pins on the sensor frame mate precisely and unambiguously with three grooves on the benchmark. To reoccupy a benchmark a Remotely Operated Vehicle (ROV) uses its manipulator arm to place the sensor pins into the benchmark grooves. In June 2014 we deployed four benchmarks offshore central Oregon. We used the ROV Jason to successfully demonstrate the removal and replacement of packages onto the benchmark. We will show the benchmark design and its operational capabilities. Presently models of megathrust slip within the Cascadia Subduction Zone (CSZ) are mostly constrained by the sub-aerial GPS vectors from the Plate Boundary Observatory, a part of Earthscope. More long-lived seafloor geodetic measures are needed to better understand the earthquake and tsunami risk associated with a large rupture of the thrust fault within the Cascadia subduction zone

The Concepts "Benchmarks and Benchmarking" Used in Education Planning: Teacher Education as Example

Science.gov (United States)

Steyn, H. J.

2015-01-01

Planning in education is a structured activity that includes several phases and steps that take into account several kinds of information (Steyn, Steyn, De Waal & Wolhuter, 2002: 146). One of the sets of information that are usually considered is the (so-called) "benchmarks" and "benchmarking" regarding the focus of a…

Dual processing and organizational justice: the role of rational versus experiential processing in third-party reactions to workplace mistreatment.

Science.gov (United States)

Skarlicki, Daniel P; Rupp, Deborah E

2010-09-01

The moral perspective of justice proposes that when confronted by another person's mistreatment, third parties can experience a deontic response, that is, an evolutionary-based emotional reaction that motivates them to engage in retribution toward the transgressor. In this article, we tested whether the third party's deontic reaction is less strong when a rational (vs. experiential) processing frame is primed. Further, we tested whether third parties high (vs. low) in moral identity are more resistant to the effects of processing frames. Results from a sample of 185 French managers revealed that following an injustice, managers primed to use rational processing reported lower retribution tendencies compared with managers primed to use experiential processing. Third parties high in moral identity, however, were less affected by the framing; they reported a high retribution response regardless of processing frame. Theoretical and practical implications of these findings are discussed. Copyright 2010 APA, all rights reserved

Aerodynamic Benchmarking of the Deepwind Design

DEFF Research Database (Denmark)

Bedona, Gabriele; Schmidt Paulsen, Uwe; Aagaard Madsen, Helge

2015-01-01

The aerodynamic benchmarking for the DeepWind rotor is conducted comparing different rotor geometries and solutions and keeping the comparison as fair as possible. The objective for the benchmarking is to find the most suitable configuration in order to maximize the power production and minimize...... the blade solicitation and the cost of energy. Different parameters are considered for the benchmarking study. The DeepWind blade is characterized by a shape similar to the Troposkien geometry but asymmetric between the top and bottom parts: this shape is considered as a fixed parameter in the benchmarking...

From Protest to Political Parties: Online Deliberation in New Parties in Spain

Directory of Open Access Journals (Sweden)

Rosa Borge Bravo

2016-12-01

Full Text Available The new parties that emerged following the 15-M movement and against the austerity measures in Spain want to build parties open to the participation and deliberation for all the citizenry. To what extent are these ideals being fulfilled? The aim of this article is to describe and assess some of the main online deliberative processes of the two most important parties, Podemos and Barcelona En Comú, following commonly accepted criteria in the literature for measuring online deliberation. Specifically, we have examined the two most-voted proposals from the online platform Plaza Podemos and the online development of the electoral programme of Barcelona En Comú. Thus, we have conducted a content analysis of 713 (Plaza Podemos and 563 (Barcelona En Comú posts. Both platforms meet the structural and technical criteria for fostering deliberation, but the external impact is high only in the case of Barcelona En Comú. The deliberative quality of the communication is good but not the criteria of reflexivity, inclusion and plurality.

Shielding benchmark problems

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Kawai, Masayoshi; Nakazawa, Masaharu.

1978-09-01

Shielding benchmark problems were prepared by the Working Group of Assessment of Shielding Experiments in the Research Comittee on Shielding Design of the Atomic Energy Society of Japan, and compiled by the Shielding Laboratory of Japan Atomic Energy Research Institute. Twenty-one kinds of shielding benchmark problems are presented for evaluating the calculational algorithm and the accuracy of computer codes based on the discrete ordinates method and the Monte Carlo method and for evaluating the nuclear data used in the codes. (author)

The Labour Party and British Republicanism

Directory of Open Access Journals (Sweden)

Kenneth O. MORGAN

2003-10-01

Full Text Available The famous detective, Sherlock Holmes, once solved a case by referring to “the dog that did not bark.” In the past 250 years of British history, republicanism is another dog that did not bark. This is particularly true of supposedly our most radical major political party, the Labour Party. Over the monarchy, as over constitutional matters generally, Labour’s instincts have been conservative. Even after 1997, when the party, led by Lord Irvine, has indeed embarked upon major constitutional ref...

Benchmarking von Krankenhausinformationssystemen – eine vergleichende Analyse deutschsprachiger Benchmarkingcluster

Directory of Open Access Journals (Sweden)

Jahn, Franziska

2015-08-01

Full Text Available Benchmarking is a method of strategic information management used by many hospitals today. During the last years, several benchmarking clusters have been established within the German-speaking countries. They support hospitals in comparing and positioning their information system’s and information management’s costs, performance and efficiency against other hospitals. In order to differentiate between these benchmarking clusters and to provide decision support in selecting an appropriate benchmarking cluster, a classification scheme is developed. The classification scheme observes both general conditions and examined contents of the benchmarking clusters. It is applied to seven benchmarking clusters which have been active in the German-speaking countries within the last years. Currently, performance benchmarking is the most frequent benchmarking type, whereas the observed benchmarking clusters differ in the number of benchmarking partners and their cooperation forms. The benchmarking clusters also deal with different benchmarking subjects. Assessing costs and quality application systems, physical data processing systems, organizational structures of information management and IT services processes are the most frequent benchmarking subjects. There is still potential for further activities within the benchmarking clusters to measure strategic and tactical information management, IT governance and quality of data and data-processing processes. Based on the classification scheme and the comparison of the benchmarking clusters, we derive general recommendations for benchmarking of hospital information systems.

7 CFR 955.91 - Additional parties.

Science.gov (United States)

2010-01-01

... Marketing Agreement § 955.91 Additional parties. After the effective date thereof, any handler may become a... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... then be effective as to such new contracting party. ...

Medical school benchmarking - from tools to programmes.

Science.gov (United States)

Wilkinson, Tim J; Hudson, Judith N; Mccoll, Geoffrey J; Hu, Wendy C Y; Jolly, Brian C; Schuwirth, Lambert W T

2015-02-01

Benchmarking among medical schools is essential, but may result in unwanted effects. To apply a conceptual framework to selected benchmarking activities of medical schools. We present an analogy between the effects of assessment on student learning and the effects of benchmarking on medical school educational activities. A framework by which benchmarking can be evaluated was developed and applied to key current benchmarking activities in Australia and New Zealand. The analogy generated a conceptual framework that tested five questions to be considered in relation to benchmarking: what is the purpose? what are the attributes of value? what are the best tools to assess the attributes of value? what happens to the results? and, what is the likely "institutional impact" of the results? If the activities were compared against a blueprint of desirable medical graduate outcomes, notable omissions would emerge. Medical schools should benchmark their performance on a range of educational activities to ensure quality improvement and to assure stakeholders that standards are being met. Although benchmarking potentially has positive benefits, it could also result in perverse incentives with unforeseen and detrimental effects on learning if it is undertaken using only a few selected assessment tools.

Shielding Benchmark Computational Analysis

International Nuclear Information System (INIS)

Hunter, H.T.; Slater, C.O.; Holland, L.B.; Tracz, G.; Marshall, W.J.; Parsons, J.L.

2000-01-01

Over the past several decades, nuclear science has relied on experimental research to verify and validate information about shielding nuclear radiation for a variety of applications. These benchmarks are compared with results from computer code models and are useful for the development of more accurate cross-section libraries, computer code development of radiation transport modeling, and building accurate tests for miniature shielding mockups of new nuclear facilities. When documenting measurements, one must describe many parts of the experimental results to allow a complete computational analysis. Both old and new benchmark experiments, by any definition, must provide a sound basis for modeling more complex geometries required for quality assurance and cost savings in nuclear project development. Benchmarks may involve one or many materials and thicknesses, types of sources, and measurement techniques. In this paper the benchmark experiments of varying complexity are chosen to study the transport properties of some popular materials and thicknesses. These were analyzed using three-dimensional (3-D) models and continuous energy libraries of MCNP4B2, a Monte Carlo code developed at Los Alamos National Laboratory, New Mexico. A shielding benchmark library provided the experimental data and allowed a wide range of choices for source, geometry, and measurement data. The experimental data had often been used in previous analyses by reputable groups such as the Cross Section Evaluation Working Group (CSEWG) and the Organization for Economic Cooperation and Development/Nuclear Energy Agency Nuclear Science Committee (OECD/NEANSC)

Leakage Resilient Secure Two-Party Computation

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Hazay, Carmit; Patra, Arpita

2012-01-01

we initiate the study of {\\em secure two-party computation in the presence of leakage}, where on top of corrupting one of the parties the adversary obtains leakage from the content of the secret memory of the honest party. Our study involves the following contributions: \\BE \\item {\\em Security...... and returns its result. Almost independently of secure computation, the area of {\\em leakage resilient cryptography} has recently been evolving intensively, studying the question of designing cryptographic primitives that remain secure even when some information about the secret key is leaked. In this paper...

Political Marketing Mix in Indonesia Parties

Directory of Open Access Journals (Sweden)

Freddy Simbolon

2016-05-01

Full Text Available The reform era has changed the paradigm of Indonesian politics. Multiparty system has demanded a political party to be able to compete for their constituents. Article aimed to convey a political marketing concept that can helppolitical parties in planning a strategy to win the election. Research method used descriptive method analysis. The results suggest that the approach of the marketing mix that includes the product, price, place, and promotion areapproaches that are very helpful in presenting a plan to win the marketing strategy of political parties in elections.

Issues in Benchmark Metric Selection

Science.gov (United States)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

Benchmarking clinical photography services in the NHS.

Science.gov (United States)

Arbon, Giles

2015-01-01

Benchmarking is used in services across the National Health Service (NHS) using various benchmarking programs. Clinical photography services do not have a program in place and services have to rely on ad hoc surveys of other services. A trial benchmarking exercise was undertaken with 13 services in NHS Trusts. This highlights valuable data and comparisons that can be used to benchmark and improve services throughout the profession.

Benchmarking Danish Industries

DEFF Research Database (Denmark)

Gammelgaard, Britta; Bentzen, Eric; Aagaard Andreassen, Mette

2003-01-01

compatible survey. The International Manufacturing Strategy Survey (IMSS) doesbring up the question of supply chain management, but unfortunately, we did not have access to thedatabase. Data from the members of the SCOR-model, in the form of benchmarked performance data,may exist, but are nonetheless...... not public. The survey is a cooperative project "Benchmarking DanishIndustries" with CIP/Aalborg University, the Danish Technological University, the DanishTechnological Institute and Copenhagen Business School as consortia partners. The project has beenfunded by the Danish Agency for Trade and Industry...

Social praxis, party, and class relations today

Directory of Open Access Journals (Sweden)

Egni Malo

2014-01-01

Full Text Available Today’s political sociologists are once again interested in the study of the crisis of mass-based parties, anti-politics and anti-parliamentarism, crisis in the authority of the political class, prevailing corporate interests within republican institutions, and populism. Political sociology however, takes the party, as a construct of political sociology alone, without consideration upon its militancy and action, as the party, which objectifies the foundation of a State, and as a result the party becomes, simply an historical category. We approach the problem of the modern state from many angles; analysing the nature of a political party as such; the ideological dangers of determinism and spontaneism which a party necessarily must struggle with; the type of non-administrative internal regime which is necessary for a party to be effective and so on. The problem we seek to elaborate is the specific character of the collective action that makes possible the passage from a sectored, corporate and subordinate role of purely negative opposition, to a leading role of conscious action towards not merely a partial adjustment within the system, but posing the issue of the State in its entirety. In developing this theme – as a study of the real relations between the political party, the classes and the State – a two-fold consideration is devoted to the study of Machiavelli and Marx: first from the angle of the real relations between the two, as thinkers of revolutionary politics, of action; and secondly from a perspective which would derive from the Marxist doctrines an articulated system of contemporary politics, as found in The Prince.

Benchmarking of SIMULATE-3 on engineering workstations

International Nuclear Information System (INIS)

Karlson, C.F.; Reed, M.L.; Webb, J.R.; Elzea, J.D.

1990-01-01

The nuclear fuel management department of Arizona Public Service Company (APS) has evaluated various computer platforms for a departmental engineering and business work-station local area network (LAN). Historically, centralized mainframe computer systems have been utilized for engineering calculations. Increasing usage and the resulting longer response times on the company mainframe system and the relative cost differential between a mainframe upgrade and workstation technology justified the examination of current workstations. A primary concern was the time necessary to turn around routine reactor physics reload and analysis calculations. Computers ranging from a Definicon 68020 processing board in an AT compatible personal computer up to an IBM 3090 mainframe were benchmarked. The SIMULATE-3 advanced nodal code was selected for benchmarking based on its extensive use in nuclear fuel management. SIMULATE-3 is used at APS for reload scoping, design verification, core follow, and providing predictions of reactor behavior under nominal conditions and planned reactor maneuvering, such as axial shape control during start-up and shutdown

Benchmarking with high-order nodal diffusion methods

International Nuclear Information System (INIS)

Tomasevic, D.; Larsen, E.W.

1993-01-01

Significant progress in the solution of multidimensional neutron diffusion problems was made in the late 1970s with the introduction of nodal methods. Modern nodal reactor analysis codes provide significant improvements in both accuracy and computing speed over earlier codes based on fine-mesh finite difference methods. In the past, the performance of advanced nodal methods was determined by comparisons with fine-mesh finite difference codes. More recently, the excellent spatial convergence of nodal methods has permitted their use in establishing reference solutions for some important bench-mark problems. The recent development of the self-consistent high-order nodal diffusion method and its subsequent variational formulation has permitted the calculation of reference solutions with one node per assembly mesh size. In this paper, we compare results for four selected benchmark problems to those obtained by high-order response matrix methods and by two well-known state-of-the-art nodal methods (the open-quotes analyticalclose quotes and open-quotes nodal expansionclose quotes methods)

Benchmarking of human resources management

Directory of Open Access Journals (Sweden)

David M. Akinnusi

2008-11-01

Full Text Available This paper reviews the role of human resource management (HRM which, today, plays a strategic partnership role in management. The focus of the paper is on HRM in the public sector, where much hope rests on HRM as a means of transforming the public service and achieving much needed service delivery. However, a critical evaluation of HRM practices in the public sector reveals that these services leave much to be desired. The paper suggests the adoption of benchmarking as a process to revamp HRM in the public sector so that it is able to deliver on its promises. It describes the nature and process of benchmarking and highlights the inherent difficulties in applying benchmarking in HRM. It concludes with some suggestions for a plan of action. The process of identifying “best” practices in HRM requires the best collaborative efforts of HRM practitioners and academicians. If used creatively, benchmarking has the potential to bring about radical and positive changes in HRM in the public sector. The adoption of the benchmarking process is, in itself, a litmus test of the extent to which HRM in the public sector has grown professionally.

The Organizational Weapon: Ruling Parties in Authoritarian Regimes

OpenAIRE

Meng, Anne

2016-01-01

This project examines party building in authoritarian regimes. The overarching puzzle I seek to address is: why are some autocratic ruling parties stronger organizations than others? What explains variation in the institutional capacity of autocratic rule? The collection of three essays in this dissertation outline the strategic logic of party institutionalization, in addition to providing new and original ways in which to measure this key concept of authoritarian party strength. It tests pre...

Integrating Best Practice and Performance Indicators To Benchmark the Performance of a School System. Benchmarking Paper 940317.

Science.gov (United States)

Cuttance, Peter

This paper provides a synthesis of the literature on the role of benchmarking, with a focus on its use in the public sector. Benchmarking is discussed in the context of quality systems, of which it is an important component. The paper describes the basic types of benchmarking, pertinent research about its application in the public sector, the…

Benchmarking and Sustainable Transport Policy

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Wyatt, Andrew; Gordon, Lucy

2004-01-01

Order to learn from the best. In 2000 the European Commission initiated research to explore benchmarking as a tool to promote policies for ‘sustainable transport’. This paper reports findings and recommendations on how to address this challenge. The findings suggest that benchmarking is a valuable...... tool that may indeed help to move forward the transport policy agenda. However, there are major conditions and limitations. First of all it is not always so straightforward to delimit, measure and compare transport services in order to establish a clear benchmark. Secondly ‘sustainable transport......’ evokes a broad range of concerns that are hard to address fully at the level of specific practices. Thirdly policies are not directly comparable across space and context. For these reasons attempting to benchmark ‘sustainable transport policies’ against one another would be a highly complex task, which...

The doctrine of party autonomy in international commercial arbitration

African Journals Online (AJOL)

The freedom of parties to consensually execute arbitration agreement is known as the principle of party autonomy. The principle provides a right for the parties to international commercial arbitration to choose applicable substantive law and these laws when chosen shall govern the contractual relationship of the parties.

Benchmarking for controllere: metoder, teknikker og muligheder

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Sandalgaard, Niels Erik; Dietrichson, Lars Grubbe

2008-01-01

Benchmarking indgår på mange måder i både private og offentlige virksomheders ledelsespraksis. I økonomistyring anvendes benchmark-baserede indikatorer (eller nøgletal), eksempelvis ved fastlæggelse af mål i resultatkontrakter eller for at angive det ønskede niveau for visse nøgletal i et Balanced...... Scorecard eller tilsvarende målstyringsmodeller. Artiklen redegør for begrebet benchmarking ved at præsentere og diskutere forskellige facetter af det, samt redegør for fire forskellige anvendelser af benchmarking for at vise begrebets bredde og væsentligheden af at klarlægge formålet med et...... benchmarkingprojekt. Dernæst bliver forskellen på resultatbenchmarking og procesbenchmarking behandlet, hvorefter brugen af intern hhv. ekstern benchmarking, samt brugen af benchmarking i budgetlægning og budgetopfølgning, behandles....

Federal Radiological Monitoring and Assessment Center advanced part phase response actions

International Nuclear Information System (INIS)

Hurley, B.

1997-01-01

Federal Radiological Monitoring and Assessment Center (FRMAC) response actions are carried out in Advance Party and Main Party phases of deployment. Response activities are initiated by a FRMAC Home Team prior to and during Advance Party deployment, with Home Team support continuing until the FRMAC Main Party is fully deployed. Upon arrival at the incident scene, the Advance Party establishes communications with other federal, state, and local response organizations, Following an Advance Party Meeting with these response organizations, FRMAC begins formulation of an initial monitoring and sampling plan, in coordination with the jurisdictional state and the Lead Federal Agency, and initiates detailed logistical arrangements for Main Party deployment and operations

Professional Performance and Bureaucratic Benchmarking Information

DEFF Research Database (Denmark)

Schneider, Melanie L.; Mahlendorf, Matthias D.; Schäffer, Utz

Prior research documents positive effects of benchmarking information provision on performance and attributes this to social comparisons. However, the effects on professional recipients are unclear. Studies of professional control indicate that professional recipients often resist bureaucratic...... controls because of organizational-professional conflicts. We therefore analyze the association between bureaucratic benchmarking information provision and professional performance and suggest that the association is more positive if prior professional performance was low. We test our hypotheses based...... on archival, publicly disclosed, professional performance data for 191 German orthopedics departments, matched with survey data on bureaucratic benchmarking information given to chief orthopedists by the administration. We find a positive association between bureaucratic benchmarking information provision...

Authoritarian Inheritance and Conservative Party-Building in Latin America

OpenAIRE

Loxton, James Ivor

2014-01-01

Beginning in the late 1970s, with the onset of the third wave of democratization, a host of new conservative parties emerged in Latin America. The trajectories of these parties varied tremendously. While some went on to enjoy long-term electoral success, others failed to take root. The most successful new conservative parties all shared a surprising characteristic: they had deep roots in former dictatorships. They were "authoritarian successor parties," or parties founded by high-level in...

The Chinese Communist Party in Reform

DEFF Research Database (Denmark)

Brødsgaard, Kjeld Erik; Yongnian, Zheng

Contrary to the expectations of many people, China's recent economic growth has not led to the collapse of the Chinese Communist Party. In fact, the party has recently carried out a peaceful and orderly transition to the so-called fourth generation of leadership, has revitalised itself, and created...... a new, younger and better trained cadre corps. Despite this successful transformation, there continue to be many problems that the party will need to overcome if it is to remain in power, including pressures for democratization in both urban and rural areas, widespread corruption, the emergence of new...

Your Golden Jubilee Party!

CERN Multimedia

2004-01-01

http://www.cern.ch/cern50/All staff are invited to the Golden Jubilee Staff Party on the evening of 17 September. To mark CERN's 50th anniversary, the Director-General would like to invite all the people working at CERN to celebrate the success of the organization. The party will be held in the cafeteria and on the terrace (if the weather permits) of the Main Building on 17 September at 4:00 pm. The event will include an address by the DG, music, film clips, drinks, snacks and a surprise music show by the CERN Big Bang Orchestra! Your effort, hard work and enthusiasm have been the key to CERN's success. The first of the main events celebrating the organization's Golden Jubilee is for you, so come along and celebrate! Early closure of Restaurant No. 1 (Bldg. 501, Meyrin site): Friday 17 September at 2:00 p.m. On Friday, 17 September, Restaurant No. 1 (NOVAE) will close at 2:00 p.m. owing to the Golden Jubilee party for the CERN staff. No dinner will be served that evening.

Your Golden Jubilee Party!

CERN Multimedia

2004-01-01

http://www.cern.ch/cern50/ All staff are invited to the Golden Jubilee Staff Party on the evening of 17 September. To mark CERN's 50th anniversary, the Director-General would like to invite all the people working at CERN to celebrate the success of the organization. Your Golden Jubilee Party Friday 17 September 2004 at 16:00 Restaurant 1, Main Building Programme Speech by Director-General Toast in honour of CERN Cocktails and ambient music Video projections of five decades of CERN and at 18:00 ... A surprise music show. Your effort, hard work and enthusiasm have been the key to CERN's success. The first of the main events celebrating the organization's Golden Jubilee is for you, so come along and celebrate! Early closure of Restaurant No. 1 (bldg. 501, Meyrin site): Friday 17 September at 2:00 p.m. On Friday, 17 September, Restaurant No. 1 (NOVAE) will close at 2:00 p.m. owing to the Golden Jubilee party for the CERN staff. No dinner will be served that evening.

EPA's Benchmark Dose Modeling Software

Science.gov (United States)

The EPA developed the Benchmark Dose Software (BMDS) as a tool to help Agency risk assessors facilitate applying benchmark dose (BMD) method’s to EPA’s human health risk assessment (HHRA) documents. The application of BMD methods overcomes many well know limitations ...

Accelerator shielding benchmark problems

International Nuclear Information System (INIS)

Hirayama, H.; Ban, S.; Nakamura, T.

1993-01-01

Accelerator shielding benchmark problems prepared by Working Group of Accelerator Shielding in the Research Committee on Radiation Behavior in the Atomic Energy Society of Japan were compiled by Radiation Safety Control Center of National Laboratory for High Energy Physics. Twenty-five accelerator shielding benchmark problems are presented for evaluating the calculational algorithm, the accuracy of computer codes and the nuclear data used in codes. (author)

Multidisciplinary breast centres in Germany: a review and update of quality assurance through benchmarking and certification.

Science.gov (United States)

Wallwiener, Markus; Brucker, Sara Y; Wallwiener, Diethelm

2012-06-01

This review summarizes the rationale for the creation of breast centres and discusses the studies conducted in Germany to obtain proof of principle for a voluntary, external benchmarking programme and proof of concept for third-party dual certification of breast centres and their mandatory quality management systems to the German Cancer Society (DKG) and German Society of Senology (DGS) Requirements of Breast Centres and ISO 9001 or similar. In addition, we report the most recent data on benchmarking and certification of breast centres in Germany. Review and summary of pertinent publications. Literature searches to identify additional relevant studies. Updates from the DKG/DGS programmes. Improvements in surrogate parameters as represented by structural and process quality indicators suggest that outcome quality is improving. The voluntary benchmarking programme has gained wide acceptance among DKG/DGS-certified breast centres. This is evidenced by early results from one of the largest studies in multidisciplinary cancer services research, initiated by the DKG and DGS to implement certified breast centres. The goal of establishing a nationwide network of certified breast centres in Germany can be considered largely achieved. Nonetheless the network still needs to be improved, and there is potential for optimization along the chain of care from mammography screening, interventional diagnosis and treatment through to follow-up. Specialization, guideline-concordant procedures as well as certification and recertification of breast centres remain essential to achieve further improvements in quality of breast cancer care and to stabilize and enhance the nationwide provision of high-quality breast cancer care.

Political parties in the Sverdlovsk region: stages of development

Directory of Open Access Journals (Sweden)

Mukhametov Ruslan Salikhovich

2013-12-01

Full Text Available This article analyzes the processes of party building in the Russian Federation. On the example of a single region – the Sverdlovsk region – we study the evolution of political parties. The factors favoring the process of formation and functioning of regional political parties and political movements in the Middle Urals are identified and classified. Much attention is paid to such factors of development of the parties in the region as a party-electoral law and the electoral system view.

Deviating From the Benchmarks

DEFF Research Database (Denmark)

Rocha, Vera; Van Praag, Mirjam; Carneiro, Anabela

This paper studies three related questions: To what extent otherwise similar startups employ different quantities and qualities of human capital at the moment of entry? How persistent are initial human capital choices over time? And how does deviating from human capital benchmarks influence firm......, founders human capital, and the ownership structure of startups (solo entrepreneurs versus entrepreneurial teams). We then study the survival implications of exogenous deviations from these benchmarks, based on spline models for survival data. Our results indicate that (especially negative) deviations from...... the benchmark can be substantial, are persistent over time, and hinder the survival of firms. The implications may, however, vary according to the sector and the ownership structure at entry. Given the stickiness of initial choices, wrong human capital decisions at entry turn out to be a close to irreversible...

The business value of demand response for balance responsible parties

OpenAIRE

Jonsson, Mattias

2014-01-01

By using IT-solutions, the flexibility on the demand side in the electrical systems could be increased. This is called demand response and is part of the larger concept called smart grids. Previous work in this area has concerned the utilization of demand response by grid owners. In this thesis the focus will instead be shifted towards the electrical companies that have balance responsibility, and how they could use demand response in order to make profits. By investigating electrical applian...

Benchmark Two-Good Utility Functions

NARCIS (Netherlands)

de Jaegher, K.

Benchmark two-good utility functions involving a good with zero income elasticity and unit income elasticity are well known. This paper derives utility functions for the additional benchmark cases where one good has zero cross-price elasticity, unit own-price elasticity, and zero own price

Developing integrated benchmarks for DOE performance measurement

Energy Technology Data Exchange (ETDEWEB)

Barancik, J.I.; Kramer, C.F.; Thode, Jr. H.C.

1992-09-30

The objectives of this task were to describe and evaluate selected existing sources of information on occupational safety and health with emphasis on hazard and exposure assessment, abatement, training, reporting, and control identifying for exposure and outcome in preparation for developing DOE performance benchmarks. Existing resources and methodologies were assessed for their potential use as practical performance benchmarks. Strengths and limitations of current data resources were identified. Guidelines were outlined for developing new or improved performance factors, which then could become the basis for selecting performance benchmarks. Data bases for non-DOE comparison populations were identified so that DOE performance could be assessed relative to non-DOE occupational and industrial groups. Systems approaches were described which can be used to link hazards and exposure, event occurrence, and adverse outcome factors, as needed to generate valid, reliable, and predictive performance benchmarks. Data bases were identified which contain information relevant to one or more performance assessment categories . A list of 72 potential performance benchmarks was prepared to illustrate the kinds of information that can be produced through a benchmark development program. Current information resources which may be used to develop potential performance benchmarks are limited. There is need to develop an occupational safety and health information and data system in DOE, which is capable of incorporating demonstrated and documented performance benchmarks prior to, or concurrent with the development of hardware and software. A key to the success of this systems approach is rigorous development and demonstration of performance benchmark equivalents to users of such data before system hardware and software commitments are institutionalized.

Benchmarking gate-based quantum computers

Science.gov (United States)

Michielsen, Kristel; Nocon, Madita; Willsch, Dennis; Jin, Fengping; Lippert, Thomas; De Raedt, Hans

2017-11-01

With the advent of public access to small gate-based quantum processors, it becomes necessary to develop a benchmarking methodology such that independent researchers can validate the operation of these processors. We explore the usefulness of a number of simple quantum circuits as benchmarks for gate-based quantum computing devices and show that circuits performing identity operations are very simple, scalable and sensitive to gate errors and are therefore very well suited for this task. We illustrate the procedure by presenting benchmark results for the IBM Quantum Experience, a cloud-based platform for gate-based quantum computing.

A Heterogeneous Medium Analytical Benchmark

International Nuclear Information System (INIS)

Ganapol, B.D.

1999-01-01

A benchmark, called benchmark BLUE, has been developed for one-group neutral particle (neutron or photon) transport in a one-dimensional sub-critical heterogeneous plane parallel medium with surface illumination. General anisotropic scattering is accommodated through the Green's Function Method (GFM). Numerical Fourier transform inversion is used to generate the required Green's functions which are kernels to coupled integral equations that give the exiting angular fluxes. The interior scalar flux is then obtained through quadrature. A compound iterative procedure for quadrature order and slab surface source convergence provides highly accurate benchmark qualities (4- to 5- places of accuracy) results

Introduction to benchmark dose methods and U.S. EPA's benchmark dose software (BMDS) version 2.1.1

International Nuclear Information System (INIS)

Davis, J. Allen; Gift, Jeffrey S.; Zhao, Q. Jay

2011-01-01

Traditionally, the No-Observed-Adverse-Effect-Level (NOAEL) approach has been used to determine the point of departure (POD) from animal toxicology data for use in human health risk assessments. However, this approach is subject to substantial limitations that have been well defined, such as strict dependence on the dose selection, dose spacing, and sample size of the study from which the critical effect has been identified. Also, the NOAEL approach fails to take into consideration the shape of the dose-response curve and other related information. The benchmark dose (BMD) method, originally proposed as an alternative to the NOAEL methodology in the 1980s, addresses many of the limitations of the NOAEL method. It is less dependent on dose selection and spacing, and it takes into account the shape of the dose-response curve. In addition, the estimation of a BMD 95% lower bound confidence limit (BMDL) results in a POD that appropriately accounts for study quality (i.e., sample size). With the recent advent of user-friendly BMD software programs, including the U.S. Environmental Protection Agency's (U.S. EPA) Benchmark Dose Software (BMDS), BMD has become the method of choice for many health organizations world-wide. This paper discusses the BMD methods and corresponding software (i.e., BMDS version 2.1.1) that have been developed by the U.S. EPA, and includes a comparison with recently released European Food Safety Authority (EFSA) BMD guidance.

Benchmarking i eksternt regnskab og revision

DEFF Research Database (Denmark)

Thinggaard, Frank; Kiertzner, Lars

2001-01-01

løbende i en benchmarking-proces. Dette kapitel vil bredt undersøge, hvor man med nogen ret kan få benchmarking-begrebet knyttet til eksternt regnskab og revision. Afsnit 7.1 beskæftiger sig med det eksterne årsregnskab, mens afsnit 7.2 tager fat i revisionsområdet. Det sidste afsnit i kapitlet opsummerer...... betragtningerne om benchmarking i forbindelse med begge områder....

EPRI depletion benchmark calculations using PARAGON

International Nuclear Information System (INIS)

Kucukboyaci, Vefa N.

2015-01-01

Highlights: • PARAGON depletion calculations are benchmarked against the EPRI reactivity decrement experiments. • Benchmarks cover a wide range of enrichments, burnups, cooling times, and burnable absorbers, and different depletion and storage conditions. • Results from PARAGON-SCALE scheme are more conservative relative to the benchmark data. • ENDF/B-VII based data reduces the excess conservatism and brings the predictions closer to benchmark reactivity decrement values. - Abstract: In order to conservatively apply burnup credit in spent fuel pool criticality analyses, code validation for both fresh and used fuel is required. Fresh fuel validation is typically done by modeling experiments from the “International Handbook.” A depletion validation can determine a bias and bias uncertainty for the worth of the isotopes not found in the fresh fuel critical experiments. Westinghouse’s burnup credit methodology uses PARAGON™ (Westinghouse 2-D lattice physics code) and its 70-group cross-section library, which have been benchmarked, qualified, and licensed both as a standalone transport code and as a nuclear data source for core design simulations. A bias and bias uncertainty for the worth of depletion isotopes, however, are not available for PARAGON. Instead, the 5% decrement approach for depletion uncertainty is used, as set forth in the Kopp memo. Recently, EPRI developed a set of benchmarks based on a large set of power distribution measurements to ascertain reactivity biases. The depletion reactivity has been used to create 11 benchmark cases for 10, 20, 30, 40, 50, and 60 GWd/MTU and 3 cooling times 100 h, 5 years, and 15 years. These benchmark cases are analyzed with PARAGON and the SCALE package and sensitivity studies are performed using different cross-section libraries based on ENDF/B-VI.3 and ENDF/B-VII data to assess that the 5% decrement approach is conservative for determining depletion uncertainty

Public funding of political parties when campaigns are informative

DEFF Research Database (Denmark)

Ortín, Ignacio Ortuño; Schultz, Christian

dependence on vote shares induces fur- ther moderation and improves welfare. If parties are asymmetric, vote share dependent public funding bene…ts the large party and makes it moderate its candidate, while the smaller party reacts by choosing a more extremist candidate. On balance, however, if the parties......The paper considers public funding of political parties when some voters are poorly informed about parties’ candidates and campaigns are informative. For symmetric equilibria, it is shown that more pub- lic funding leads parties to chose more moderate candidates, and that an increase in the funding’s...... are not too asymmetric, an increase in vote share dependent funding improves welfare and increases the likelihood that a moderate candidate wins the election...

31 CFR 19.950 - Excluded Parties List System

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Excluded Parties List System 19.950 Section 19.950 Money and Finance: Treasury Office of the Secretary of the Treasury GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 19.950 Excluded Parties List System Excluded Parties...

Publishing E-RDF linked data for many agents by single third-party server

DEFF Research Database (Denmark)

Wang, Dongsheng; Zhang, Yongyuan; Wang, Zhengjun

2017-01-01

do not have the ability or do not want to make an additional effort to publish linked data. Thus, for agents who are willing to open part of their data but do not want to make an effort, the task can be undertaken by a professional third-party server (together with professional experts......) that publishes linked data for these agents. Consequently, when a single third-party server is on behalf of multiple agents, it is also responsible to organize these multiple-source URIs (data) in a systematic way to make them referable, satisfying the 4-star data principles, as well as protect the confidential...... data. For validation, we implement a prototype system as a third-party server that publishes linked data for a number of agents. It demonstrates well-organized 5-star linked data plus E-RDF and shows the additional advantages of data integration and interlinking among agents....

The Dark Side of Altruistic Third-Party Punishment

Science.gov (United States)

Leibbrandt, Andreas; Lopez-Perez, Raul

2011-01-01

This article experimentally studies punishment from unaffected third parties in ten different games. The authors show that third-party punishment exhibits several features that are arguably undesirable. First, third parties punish strongly a decider if she chooses a socially efficient or a Pareto efficient allocation and becomes the richest party…

Features of modern security policy UK political parties

Directory of Open Access Journals (Sweden)

A. V. Stalovierova

2015-12-01

Full Text Available The security policy of the British coalition government of D. Cameron (2010-2015 is summarized; it’s been proved that political forces of Tory and Liberal Democrat should have compromised to carry out unanimous course in the scope of national security, and the problems of the security strategy on parliamentary elections in 2015 are analyzed, particularly the comparative analysis of the modern safety strategy of leading British parties is exercised. Under conditions of the appearance of new challenges and threats, transformation of international safety system, the questions of safety policy often become the object of attention of the British community and experts. The absence of cross-party consensus on most terms of safety strategy of the United Kingdom during the election campaign in 2015 makes the discussion about perspectives of the British safety policy still more urgent. During the election campaign there was no unity on any aspect of security subject between parties. First of all, Labourists, Liberal Democrats, Scottish National Party and Green Party made a statement about readiness to develop cooperation with the EU and the Conservatives and the UK Independence Party were on the side of the Eurosceptics. The opinions of the parties were also divided on military operations abroad, financing and force level. In terms of one-party government and presence of majority in the House of Commons, the Conservatives have opportunities to realize their own vision of British safety policy.

Ad hoc committee on reactor physics benchmarks

International Nuclear Information System (INIS)

Diamond, D.J.; Mosteller, R.D.; Gehin, J.C.

1996-01-01

In the spring of 1994, an ad hoc committee on reactor physics benchmarks was formed under the leadership of two American Nuclear Society (ANS) organizations. The ANS-19 Standards Subcommittee of the Reactor Physics Division and the Computational Benchmark Problem Committee of the Mathematics and Computation Division had both seen a need for additional benchmarks to help validate computer codes used for light water reactor (LWR) neutronics calculations. Although individual organizations had employed various means to validate the reactor physics methods that they used for fuel management, operations, and safety, additional work in code development and refinement is under way, and to increase accuracy, there is a need for a corresponding increase in validation. Both organizations thought that there was a need to promulgate benchmarks based on measured data to supplement the LWR computational benchmarks that have been published in the past. By having an organized benchmark activity, the participants also gain by being able to discuss their problems and achievements with others traveling the same route

The German Environmentalist Party - The Greens

International Nuclear Information System (INIS)

Mettke, J.R.

1982-01-01

The Greens are winning supporters throughout the FRG, quite a few of them are already members of the parliament of various lands. Will they cooperate with the established political parties in Bonn. Will they take over from the Free Democrats the role of holding the balance of power. In this book, Spiegel editors present their analyses of the changing concepts of the new political movement. The most outstanding members of the Environmentalist Party - the so-called Greens - define their position and state their opinions on the problems of coalition forming, and prominent members of the parties of the German Bundestag answer these statements. (orig.) [de

12 CFR 263.102 - Prevailing party.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Prevailing party. 263.102 Section 263.102 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM RULES... Prevailing party. Only an eligible applicant that prevailed on the merits of an adversary proceeding may...

Sex Parties: Female Teen Sexual Experimentation

Science.gov (United States)

Toscano, Sharyl Eve

2006-01-01

Adolescent participants in a study aimed at exploring the nature and characteristics of girls' dating relationships revealed the phenomenon of sex parties. These teens defined a "sex party" as an opportunity to engage in sexual contact outside of typical dating relationships. Sexual activity could involve actual intercourse, but usually involved…

Server-Aided Two-Party Computation with Simultaneous Corruption

DEFF Research Database (Denmark)

Cascudo Pueyo, Ignacio; Damgård, Ivan Bjerre; Ranellucci, Samuel

We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal composab......We consider secure two-party computation in the client-server model where there are two adversaries that operate separately but simultaneously, each of them corrupting one of the parties and a restricted subset of servers that they interact with. We model security via the local universal...

Computational Chemistry Comparison and Benchmark Database

Science.gov (United States)

SRD 101 NIST Computational Chemistry Comparison and Benchmark Database (Web, free access)   The NIST Computational Chemistry Comparison and Benchmark Database is a collection of experimental and ab initio thermochemical properties for a selected set of molecules. The goals are to provide a benchmark set of molecules for the evaluation of ab initio computational methods and allow the comparison between different ab initio computational methods for the prediction of thermochemical properties.

Financing of Political Parties and Electoral Campaigns in Republic of Macedonia

Directory of Open Access Journals (Sweden)

Farije ALIU

2016-07-01

made public. The law does not provide for submission of financial reports by donors of political parties. This is considered a disadvantage of this law and expressed doubt that allowing circulation of funds from illegal sources in the financing of election campaigns. Electoral Code prohibits election campaign financing by funds from the state budget. However, the organizers of the campaign receive compensation from the state budget if they won at least 1.5% of the total vote. Also political parties, their electoral campaigns financed from private sources in the form of membership fees, donations from individuals and legal entities. Despite the legal aspects on transparency, general public perception is that in a country where the economy in cash still plays an important role, transparency is generally low in practice and that political parties and candidates for elections receive and spend much more money than what is officially shown in the financial statements. Higher spending funds still dominate especially in the area of paid political advertisements. Transparency in political financing provides elected officials and leaders of political parties to be responsible for their finances and facilitate the monitoring of their integrity. Based on current practice can be said that despite the controls performed financial activities of political parties by the state institutions, punitive measures are not implemented despite the apparent state of inconsistency regarding the practice of financial reporting and transparency. In this scientific article is exhausted comparative and empirical methodology, which include an assessment of source funding for political parties and financing of election campaign for local elections in 2013, parliamentary and presidential elections in 2014. The methodology involves checking the legal framework as it is applied in practice in terms of transparency of political financing, compared with internationally recognized principles. By getting

MTCB: A Multi-Tenant Customizable database Benchmark

NARCIS (Netherlands)

van der Zijden, WIm; Hiemstra, Djoerd; van Keulen, Maurice

2017-01-01

We argue that there is a need for Multi-Tenant Customizable OLTP systems. Such systems need a Multi-Tenant Customizable Database (MTC-DB) as a backing. To stimulate the development of such databases, we propose the benchmark MTCB. Benchmarks for OLTP exist and multi-tenant benchmarks exist, but no

Internal Benchmarking for Institutional Effectiveness

Science.gov (United States)

Ronco, Sharron L.

2012-01-01

Internal benchmarking is an established practice in business and industry for identifying best in-house practices and disseminating the knowledge about those practices to other groups in the organization. Internal benchmarking can be done with structures, processes, outcomes, or even individuals. In colleges or universities with multicampuses or a…

Benchmarking the Netherlands. Benchmarking for growth

International Nuclear Information System (INIS)

2003-01-01

This is the fourth edition of the Ministry of Economic Affairs' publication 'Benchmarking the Netherlands', which aims to assess the competitiveness of the Dutch economy. The methodology and objective of the benchmarking remain the same. The basic conditions for economic activity (institutions, regulation, etc.) in a number of benchmark countries are compared in order to learn from the solutions found by other countries for common economic problems. This publication is devoted entirely to the potential output of the Dutch economy. In other words, its ability to achieve sustainable growth and create work over a longer period without capacity becoming an obstacle. This is important because economic growth is needed to increase prosperity in the broad sense and meeting social needs. Prosperity in both a material (per capita GDP) and immaterial (living environment, environment, health, etc) sense, in other words. The economy's potential output is determined by two structural factors: the growth of potential employment and the structural increase in labour productivity. Analysis by the Netherlands Bureau for Economic Policy Analysis (CPB) shows that in recent years the increase in the capacity for economic growth has been realised mainly by increasing the supply of labour and reducing the equilibrium unemployment rate. In view of the ageing of the population in the coming years and decades the supply of labour is unlikely to continue growing at the pace we have become accustomed to in recent years. According to a number of recent studies, to achieve a respectable rate of sustainable economic growth the aim will therefore have to be to increase labour productivity. To realise this we have to focus on for six pillars of economic policy: (1) human capital, (2) functioning of markets, (3) entrepreneurship, (4) spatial planning, (5) innovation, and (6) sustainability. These six pillars determine the course for economic policy aiming at higher productivity growth. Throughout

Benchmarking the Netherlands. Benchmarking for growth

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-01-01

This is the fourth edition of the Ministry of Economic Affairs' publication 'Benchmarking the Netherlands', which aims to assess the competitiveness of the Dutch economy. The methodology and objective of the benchmarking remain the same. The basic conditions for economic activity (institutions, regulation, etc.) in a number of benchmark countries are compared in order to learn from the solutions found by other countries for common economic problems. This publication is devoted entirely to the potential output of the Dutch economy. In other words, its ability to achieve sustainable growth and create work over a longer period without capacity becoming an obstacle. This is important because economic growth is needed to increase prosperity in the broad sense and meeting social needs. Prosperity in both a material (per capita GDP) and immaterial (living environment, environment, health, etc) sense, in other words. The economy's potential output is determined by two structural factors: the growth of potential employment and the structural increase in labour productivity. Analysis by the Netherlands Bureau for Economic Policy Analysis (CPB) shows that in recent years the increase in the capacity for economic growth has been realised mainly by increasing the supply of labour and reducing the equilibrium unemployment rate. In view of the ageing of the population in the coming years and decades the supply of labour is unlikely to continue growing at the pace we have become accustomed to in recent years. According to a number of recent studies, to achieve a respectable rate of sustainable economic growth the aim will therefore have to be to increase labour productivity. To realise this we have to focus on for six pillars of economic policy: (1) human capital, (2) functioning of markets, (3) entrepreneurship, (4) spatial planning, (5) innovation, and (6) sustainability. These six pillars determine the course for economic policy aiming at higher productivity

12 CFR 747.603 - Prevailing party.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Prevailing party. 747.603 Section 747.603 Banks... in NCUA Board Adjudications § 747.603 Prevailing party. An eligible applicant may be a “prevailing... dismissed. In appropriate situations an applicant may also have prevailed if the outcome of the proceeding...

12 CFR 308.173 - Prevailing party.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Prevailing party. 308.173 Section 308.173 Banks....173 Prevailing party. (a) General rule. An eligible applicant who, following an adversary adjudication has gained victory on the merits in the proceeding is a “prevailing party”. An eligible applicant may...

6 CFR 13.13 - Parties to the hearing.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Parties to the hearing. 13.13 Section 13.13 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.13 Parties to the hearing. (a) The parties to the hearing will be the Defendant and the Authority...

Social Networks and Political Parties in Chile

OpenAIRE

Adler Lomnitz, Larissa

2002-01-01

This paper describes the origin and evolution of two Chilean political parties (the Radical Party and the Christian Democrat Party) through the analysis of the social networks that originated and composed them. The aim of this study is to propose a model of national political cultures on the basis of the structure of social networks related to power and of the symbol system, which legitimizes it. The structure of social networks, horizontal and vertical, are based on reciprocal or redistribut...

Benchmark simulation models, quo vadis?

DEFF Research Database (Denmark)

Jeppsson, U.; Alex, J; Batstone, D. J.

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to p...

Benchmark for Strategic Performance Improvement.

Science.gov (United States)

Gohlke, Annette

1997-01-01

Explains benchmarking, a total quality management tool used to measure and compare the work processes in a library with those in other libraries to increase library performance. Topics include the main groups of upper management, clients, and staff; critical success factors for each group; and benefits of benchmarking. (Author/LRW)

Economic Beliefs and Party Preference

OpenAIRE

Michael W.M. Roos; Andreas Orland

2014-01-01

This paper reports the results of a questionnaire study used to explore the economic understanding, normative positions along the egalitarian-libertarian spectrum, and the party preferences of a large student sample. The aim of the study is both to find socio-economic determinants of normative and positive beliefs and to explore how beliefs about the economy influence party support. We find that positive beliefs of lay people differ systematically from those of economic experts. Positive beli...

The impact of a scheduling change on ninth grade high school performance on biology benchmark exams and the California Standards Test

Science.gov (United States)

Leonardi, Marcelo

The primary purpose of this study was to examine the impact of a scheduling change from a trimester 4x4 block schedule to a modified hybrid schedule on student achievement in ninth grade biology courses. This study examined the impact of the scheduling change on student achievement through teacher created benchmark assessments in Genetics, DNA, and Evolution and on the California Standardized Test in Biology. The secondary purpose of this study examined the ninth grade biology teacher perceptions of ninth grade biology student achievement. Using a mixed methods research approach, data was collected both quantitatively and qualitatively as aligned to research questions. Quantitative methods included gathering data from departmental benchmark exams and California Standardized Test in Biology and conducting multiple analysis of covariance and analysis of covariance to determine significance differences. Qualitative methods include journal entries questions and focus group interviews. The results revealed a statistically significant increase in scores on both the DNA and Evolution benchmark exams. DNA and Evolution benchmark exams showed significant improvements from a change in scheduling format. The scheduling change was responsible for 1.5% of the increase in DNA benchmark scores and 2% of the increase in Evolution benchmark scores. The results revealed a statistically significant decrease in scores on the Genetics Benchmark exam as a result of the scheduling change. The scheduling change was responsible for 1% of the decrease in Genetics benchmark scores. The results also revealed a statistically significant increase in scores on the CST Biology exam. The scheduling change was responsible for .7% of the increase in CST Biology scores. Results of the focus group discussions indicated that all teachers preferred the modified hybrid schedule over the trimester schedule and that it improved student achievement.

Revaluering benchmarking - A topical theme for the construction industry

DEFF Research Database (Denmark)

Rasmussen, Grane Mikael Gregaard

2011-01-01

and questioning the concept objectively. This paper addresses the underlying nature of benchmarking, and accounts for the importance of focusing attention on the sociological impacts benchmarking has in organizations. To understand these sociological impacts, benchmarking research needs to transcend...... the perception of benchmarking systems as secondary and derivative and instead studying benchmarking as constitutive of social relations and as irredeemably social phenomena. I have attempted to do so in this paper by treating benchmarking using a calculative practice perspective, and describing how...

Establishing benchmarks and metrics for utilization management.

Science.gov (United States)

Melanson, Stacy E F

2014-01-01

The changing environment of healthcare reimbursement is rapidly leading to a renewed appreciation of the importance of utilization management in the clinical laboratory. The process of benchmarking of laboratory operations is well established for comparing organizational performance to other hospitals (peers) and for trending data over time through internal benchmarks. However, there are relatively few resources available to assist organizations in benchmarking for laboratory utilization management. This article will review the topic of laboratory benchmarking with a focus on the available literature and services to assist in managing physician requests for laboratory testing. © 2013.

Internal party democracy as a factor of transitional societiy consolidation

Directory of Open Access Journals (Sweden)

O. L. Tupitzya

2016-08-01

The possibility of intra-party democracy appearance as a sustainable and well played phenomena can only be based on the formation of political parties as a competitive and dynamic structures that have a high degree of internal relationships and a clear understanding of a common goal that is shared by both the governing parties and the basis of parties and ordinary party members. Distribution of party members in top management, middle functional rank and ordinary members is an obvious consequence of the organizational functioning of any extensive and systematic organization.

How Benchmarking and Higher Education Came Together

Science.gov (United States)

Levy, Gary D.; Ronco, Sharron L.

2012-01-01

This chapter introduces the concept of benchmarking and how higher education institutions began to use benchmarking for a variety of purposes. Here, benchmarking is defined as a strategic and structured approach whereby an organization compares aspects of its processes and/or outcomes to those of another organization or set of organizations to…

Your Golden Jubilee Party!

CERN Multimedia

2004-01-01

All staff are invited to the Golden Jubilee Staff Party on the evening of 17 September. To mark CERN's 50th anniversary, the Director General would like to invite all staff working at CERN to celebrate the success of the organization. The party will be held on the terrace of the Main Building on 17 September at 4:00 pm. The event will include an address by the DG, music, film clips, drinks and snacks. Your effort, hard work and enthusiasm have been the key to CERN's success. The first of the main events celebrating the organization's Golden Jubilee is for you, so come along and celebrate!

Matrix revolutions? An analysis of party organization and ICT use by political parties in the Republic of Ireland

NARCIS (Netherlands)

Wall, M.; Sudulich, M.L.

2010-01-01

This article investigates the characteristics of political parties' websites in the Republic of Ireland and seeks to evaluate whether parties' organizational structures influence the manner in which they present themselves online. Ireland has been chosen as a research environment because there is

Direct and indirect welfare chauvinism as party strategies

DEFF Research Database (Denmark)

Careja, Romana; Elmelund-Præstekær, Christian; Klitgaard, Michael Baggesen

2016-01-01

negatively affect immigrants the most. Combining quantitative and qualitative analysis of labour market reforms in Denmark, where one of the most successful populist right-wing parties in Europe – the Danish People's Party – held a pivotal position in the period 2001–11, the article traces the intentions...... and deliberate policy-making strategies of the party. It shows that the distinction between direct and indirect chauvinism is a useful theoretical tool for understanding how the Danish People's Party can fulfill the expectations of both its electorate and its coalition partners, even if they point in different...

A Benchmark for Evaluating Moving Object Indexes

DEFF Research Database (Denmark)

Chen, Su; Jensen, Christian Søndergaard; Lin, Dan

2008-01-01

that targets techniques for the indexing of the current and near-future positions of moving objects. This benchmark enables the comparison of existing and future indexing techniques. It covers important aspects of such indexes that have not previously been covered by any benchmark. Notable aspects covered......Progress in science and engineering relies on the ability to measure, reliably and in detail, pertinent properties of artifacts under design. Progress in the area of database-index design thus relies on empirical studies based on prototype implementations of indexes. This paper proposes a benchmark...... include update efficiency, query efficiency, concurrency control, and storage requirements. Next, the paper applies the benchmark to half a dozen notable moving-object indexes, thus demonstrating the viability of the benchmark and offering new insight into the performance properties of the indexes....

Benchmarking infrastructure for mutation text mining.

Science.gov (United States)

Klein, Artjom; Riazanov, Alexandre; Hindle, Matthew M; Baker, Christopher Jo

2014-02-25

Experimental research on the automatic extraction of information about mutations from texts is greatly hindered by the lack of consensus evaluation infrastructure for the testing and benchmarking of mutation text mining systems. We propose a community-oriented annotation and benchmarking infrastructure to support development, testing, benchmarking, and comparison of mutation text mining systems. The design is based on semantic standards, where RDF is used to represent annotations, an OWL ontology provides an extensible schema for the data and SPARQL is used to compute various performance metrics, so that in many cases no programming is needed to analyze results from a text mining system. While large benchmark corpora for biological entity and relation extraction are focused mostly on genes, proteins, diseases, and species, our benchmarking infrastructure fills the gap for mutation information. The core infrastructure comprises (1) an ontology for modelling annotations, (2) SPARQL queries for computing performance metrics, and (3) a sizeable collection of manually curated documents, that can support mutation grounding and mutation impact extraction experiments. We have developed the principal infrastructure for the benchmarking of mutation text mining tasks. The use of RDF and OWL as the representation for corpora ensures extensibility. The infrastructure is suitable for out-of-the-box use in several important scenarios and is ready, in its current state, for initial community adoption.

Benchmarking infrastructure for mutation text mining

Science.gov (United States)

2014-01-01

Background Experimental research on the automatic extraction of information about mutations from texts is greatly hindered by the lack of consensus evaluation infrastructure for the testing and benchmarking of mutation text mining systems. Results We propose a community-oriented annotation and benchmarking infrastructure to support development, testing, benchmarking, and comparison of mutation text mining systems. The design is based on semantic standards, where RDF is used to represent annotations, an OWL ontology provides an extensible schema for the data and SPARQL is used to compute various performance metrics, so that in many cases no programming is needed to analyze results from a text mining system. While large benchmark corpora for biological entity and relation extraction are focused mostly on genes, proteins, diseases, and species, our benchmarking infrastructure fills the gap for mutation information. The core infrastructure comprises (1) an ontology for modelling annotations, (2) SPARQL queries for computing performance metrics, and (3) a sizeable collection of manually curated documents, that can support mutation grounding and mutation impact extraction experiments. Conclusion We have developed the principal infrastructure for the benchmarking of mutation text mining tasks. The use of RDF and OWL as the representation for corpora ensures extensibility. The infrastructure is suitable for out-of-the-box use in several important scenarios and is ready, in its current state, for initial community adoption. PMID:24568600

Benchmarking: A Process for Improvement.

Science.gov (United States)

Peischl, Thomas M.

One problem with the outcome-based measures used in higher education is that they measure quantity but not quality. Benchmarking, or the use of some external standard of quality to measure tasks, processes, and outputs, is partially solving that difficulty. Benchmarking allows for the establishment of a systematic process to indicate if outputs…

Psychometric Analyses of the Birthday Party

Science.gov (United States)

Lee, Young-Sun

2016-01-01

The present research focuses on the psychometric properties of the Birthday Party measure for ages 3-5. The Birthday Party was developed to provide a reliable, valid, and engaging measure of early mathematical content--Number and Operation, Shape, Space, and Pattern--that can be given in either a short or a long form to English and Spanish…

The gender of party leadership and its impact on voter's asessment

DEFF Research Database (Denmark)

Kosiara-Pedersen, Karina

Even though most political parties are still male dominated, an increasing number of women reach the top position of party leader. Furthermore, party leadership is increasingly regarded as an important part of party images due to the personalization of politics. Does the gender of the party leader...... leader characteristics appreciated by men and women. If this holds, the gender of party leadership matters to women because they value woman party leaders higher, not because they value other characteristics than men....

Hospital benchmarking: are U.S. eye hospitals ready?

Science.gov (United States)

de Korne, Dirk F; van Wijngaarden, Jeroen D H; Sol, Kees J C A; Betz, Robert; Thomas, Richard C; Schein, Oliver D; Klazinga, Niek S

2012-01-01

Benchmarking is increasingly considered a useful management instrument to improve quality in health care, but little is known about its applicability in hospital settings. The aims of this study were to assess the applicability of a benchmarking project in U.S. eye hospitals and compare the results with an international initiative. We evaluated multiple cases by applying an evaluation frame abstracted from the literature to five U.S. eye hospitals that used a set of 10 indicators for efficiency benchmarking. Qualitative analysis entailed 46 semistructured face-to-face interviews with stakeholders, document analyses, and questionnaires. The case studies only partially met the conditions of the evaluation frame. Although learning and quality improvement were stated as overall purposes, the benchmarking initiative was at first focused on efficiency only. No ophthalmic outcomes were included, and clinicians were skeptical about their reporting relevance and disclosure. However, in contrast with earlier findings in international eye hospitals, all U.S. hospitals worked with internal indicators that were integrated in their performance management systems and supported benchmarking. Benchmarking can support performance management in individual hospitals. Having a certain number of comparable institutes provide similar services in a noncompetitive milieu seems to lay fertile ground for benchmarking. International benchmarking is useful only when these conditions are not met nationally. Although the literature focuses on static conditions for effective benchmarking, our case studies show that it is a highly iterative and learning process. The journey of benchmarking seems to be more important than the destination. Improving patient value (health outcomes per unit of cost) requires, however, an integrative perspective where clinicians and administrators closely cooperate on both quality and efficiency issues. If these worlds do not share such a relationship, the added

Radiation Detection Computational Benchmark Scenarios

Energy Technology Data Exchange (ETDEWEB)

Shaver, Mark W.; Casella, Andrew M.; Wittman, Richard S.; McDonald, Ben S.

2013-09-24

Modeling forms an important component of radiation detection development, allowing for testing of new detector designs, evaluation of existing equipment against a wide variety of potential threat sources, and assessing operation performance of radiation detection systems. This can, however, result in large and complex scenarios which are time consuming to model. A variety of approaches to radiation transport modeling exist with complementary strengths and weaknesses for different problems. This variety of approaches, and the development of promising new tools (such as ORNL’s ADVANTG) which combine benefits of multiple approaches, illustrates the need for a means of evaluating or comparing different techniques for radiation detection problems. This report presents a set of 9 benchmark problems for comparing different types of radiation transport calculations, identifying appropriate tools for classes of problems, and testing and guiding the development of new methods. The benchmarks were drawn primarily from existing or previous calculations with a preference for scenarios which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22. From a technical perspective, the benchmarks were chosen to span a range of difficulty and to include gamma transport, neutron transport, or both and represent different important physical processes and a range of sensitivity to angular or energy fidelity. Following benchmark identification, existing information about geometry, measurements, and previous calculations were assembled. Monte Carlo results (MCNP decks) were reviewed or created and re-run in order to attain accurate computational times and to verify agreement with experimental data, when present. Benchmark information was then conveyed to ORNL in order to guide testing and development of hybrid calculations. The results of those ADVANTG calculations were then sent to PNNL for

The Hobby Horse of the Party for the Animals

NARCIS (Netherlands)

Otjes, Simon

2016-01-01

Can a small, new political party increase the attention to nonhuman animal welfare? This paper traces the effect of the Party for the Animals on the Dutch parliament. This was the first animal advocacy party to enter parliament.

STEM and the Evolution of the Astronomical Star Party

Science.gov (United States)

Day, B. H.; Munive, P.; Franco, J.; Jones, A. P.; Shaner, A. J.; Buxner, S.; Bleacher, L.

2015-12-01

The astronomical star party has long been a powerful and effective way to engage the public and enhance cohesiveness within the amateur astronomy community. Early star parties tended to be strictly small, local events. But with improvements in transportation, larger regional star parties became popular. These advanced the considerable capabilities for citizen science in the amateur community, shared technology and engineering innovations in the field of telescope making, and refined numerous mathematical techniques in areas such instrument design and ephemeris generation, covering the full breadth of STEM. Advancements in astrophotography showcased at these events brought the star party from STEM to STEAM. Now, the advent of social media, web streaming, and virtual presence has facilitated the phenomenon of very large, networked star parties with international scope. These mega star parties take public engagement to a new, far greater levels, giving a vastly larger and more diverse public the opportunity to directly participate in exciting first-hand STEM activities. This presentation will recount the evolution of the star party and will focus on two examples of large, multinational, networked star parties, International Observe the Moon Night and Noche de las Estrellas. We will look at lessons learned and ways to participate.

WWER-1000 Burnup Credit Benchmark (CB5)

International Nuclear Information System (INIS)

Manolova, M.A.

2002-01-01

In the paper the specification of WWER-1000 Burnup Credit Benchmark first phase (depletion calculations), given. The second phase - criticality calculations for the WWER-1000 fuel pin cell, will be given after the evaluation of the results, obtained at the first phase. The proposed benchmark is a continuation of the WWER benchmark activities in this field (Author)

The role of benchmarking for yardstick competition

International Nuclear Information System (INIS)

Burns, Phil; Jenkins, Cloda; Riechmann, Christoph

2005-01-01

With the increasing interest in yardstick regulation, there is a need to understand the most appropriate method for realigning tariffs at the outset. Benchmarking is the tool used for such realignment and is therefore a necessary first-step in the implementation of yardstick competition. A number of concerns have been raised about the application of benchmarking, making some practitioners reluctant to move towards yardstick based regimes. We assess five of the key concerns often discussed and find that, in general, these are not as great as perceived. The assessment is based on economic principles and experiences with applying benchmarking to regulated sectors, e.g. in the electricity and water industries in the UK, The Netherlands, Austria and Germany in recent years. The aim is to demonstrate that clarity on the role of benchmarking reduces the concern about its application in different regulatory regimes. We find that benchmarking can be used in regulatory settlements, although the range of possible benchmarking approaches that are appropriate will be small for any individual regulatory question. Benchmarking is feasible as total cost measures and environmental factors are better defined in practice than is commonly appreciated and collusion is unlikely to occur in environments with more than 2 or 3 firms (where shareholders have a role in monitoring and rewarding performance). Furthermore, any concern about companies under-recovering costs is a matter to be determined through the regulatory settlement and does not affect the case for using benchmarking as part of that settlement. (author)

Benchmarking MARS (accident management software) with the Browns Ferry fire

International Nuclear Information System (INIS)

Dawson, S.M.; Liu, L.Y.; Raines, J.C.

1992-01-01

The MAAP Accident Response System (MARS) is a userfriendly computer software developed to provide management and engineering staff with the most needed insights, during actual or simulated accidents, of the current and future conditions of the plant based on current plant data and its trends. To demonstrate the reliability of the MARS code in simulatng a plant transient, MARS is being benchmarked with the available reactor pressure vessel (RPV) pressure and level data from the Browns Ferry fire. The MRS software uses the Modular Accident Analysis Program (MAAP) code as its basis to calculate plant response under accident conditions. MARS uses a limited set of plant data to initialize and track the accidnt progression. To perform this benchmark, a simulated set of plant data was constructed based on actual report data containing the information necessary to initialize MARS and keep track of plant system status throughout the accident progression. The initial Browns Ferry fire data were produced by performing a MAAP run to simulate the accident. The remaining accident simulation used actual plant data

Race, ideology, and the tea party: a longitudinal study.

Directory of Open Access Journals (Sweden)

Eric D Knowles

Full Text Available The Tea Party movement, which rose to prominence in the United States after the election of President Barack Obama, provides an ideal context in which to examine the roles of racial concerns and ideology in politics. A three-wave longitudinal study tracked changes in White Americans' self-identification with the Tea Party, racial concerns (prejudice and racial identification, and ideologies (libertarianism and social conservatism over nine months. Latent Growth Modeling (LGM was used to evaluate potential causal relationships between Tea Party identification and these factors. Across time points, racial prejudice was indirectly associated with movement identification through Whites' assertions of national decline. Although initial levels of White identity did not predict change in Tea Party identification, initial levels of Tea Party identification predicted increases in White identity over the study period. Across the three assessments, support for the Tea Party fell among libertarians, but rose among social conservatives. Results are discussed in terms of legitimation theories of prejudice, the "racializing" power of political judgments, and the ideological dynamics of the Tea Party.

Race, Ideology, and the Tea Party: A Longitudinal Study

Science.gov (United States)

Knowles, Eric D.; Lowery, Brian S.; Shulman, Elizabeth P.; Schaumberg, Rebecca L.

2013-01-01

The Tea Party movement, which rose to prominence in the United States after the election of President Barack Obama, provides an ideal context in which to examine the roles of racial concerns and ideology in politics. A three-wave longitudinal study tracked changes in White Americans’ self-identification with the Tea Party, racial concerns (prejudice and racial identification), and ideologies (libertarianism and social conservatism) over nine months. Latent Growth Modeling (LGM) was used to evaluate potential causal relationships between Tea Party identification and these factors. Across time points, racial prejudice was indirectly associated with movement identification through Whites’ assertions of national decline. Although initial levels of White identity did not predict change in Tea Party identification, initial levels of Tea Party identification predicted increases in White identity over the study period. Across the three assessments, support for the Tea Party fell among libertarians, but rose among social conservatives. Results are discussed in terms of legitimation theories of prejudice, the “racializing” power of political judgments, and the ideological dynamics of the Tea Party. PMID:23825630

Benchmarking of thermalhydraulic loop models for lead-alloy-cooled advanced nuclear energy systems. Phase I: Isothermal forced convection case

International Nuclear Information System (INIS)

2012-06-01

Under the auspices of the NEA Nuclear Science Committee (NSC), the Working Party on Scientific Issues of the Fuel Cycle (WPFC) has been established to co-ordinate scientific activities regarding various existing and advanced nuclear fuel cycles, including advanced reactor systems, associated chemistry and flowsheets, development and performance of fuel and materials and accelerators and spallation targets. The WPFC has different expert groups to cover a wide range of scientific issues in the field of nuclear fuel cycle. The Task Force on Lead-Alloy-Cooled Advanced Nuclear Energy Systems (LACANES) was created in 2006 to study thermal-hydraulic characteristics of heavy liquid metal coolant loop. The objectives of the task force are to (1) validate thermal-hydraulic loop models for application to LACANES design analysis in participating organisations, by benchmarking with a set of well-characterised lead-alloy coolant loop test data, (2) establish guidelines for quantifying thermal-hydraulic modelling parameters related to friction and heat transfer by lead-alloy coolant and (3) identify specific issues, either in modelling and/or in loop testing, which need to be addressed via possible future work. Nine participants from seven different institutes participated in the first phase of the benchmark. This report provides details of the benchmark specifications, method and code characteristics and results of the preliminary study: pressure loss coefficient and Phase-I. A comparison and analysis of the results will be performed together with Phase-II

Turkish Political Market and the Perception of Political Parties

Directory of Open Access Journals (Sweden)

Cihat Polat

2015-06-01

Full Text Available This study attempts to describe the Turkish political market and determine where and how Turkish political parties are perceived by voters. The study uses a two-dimensional map to determine the voter perceptions of the parties in the Turkish political market based on a survey questionnaire applied to 400 young voters. It also investigates whether there are any major differences in the perception of parties in the political space based on voter ideologies. The study finds that young voters have clear perceptions of the positions of Turkish parties. It also finds that voter perceptions of parties vary based on voters’ ideological positions.

SP2Bench: A SPARQL Performance Benchmark

Science.gov (United States)

Schmidt, Michael; Hornung, Thomas; Meier, Michael; Pinkel, Christoph; Lausen, Georg

A meaningful analysis and comparison of both existing storage schemes for RDF data and evaluation approaches for SPARQL queries necessitates a comprehensive and universal benchmark platform. We present SP2Bench, a publicly available, language-specific performance benchmark for the SPARQL query language. SP2Bench is settled in the DBLP scenario and comprises a data generator for creating arbitrarily large DBLP-like documents and a set of carefully designed benchmark queries. The generated documents mirror vital key characteristics and social-world distributions encountered in the original DBLP data set, while the queries implement meaningful requests on top of this data, covering a variety of SPARQL operator constellations and RDF access patterns. In this chapter, we discuss requirements and desiderata for SPARQL benchmarks and present the SP2Bench framework, including its data generator, benchmark queries and performance metrics.

RB reactor benchmark cores

International Nuclear Information System (INIS)

Pesic, M.

1998-01-01

A selected set of the RB reactor benchmark cores is presented in this paper. The first results of validation of the well-known Monte Carlo MCNP TM code and adjoining neutron cross section libraries are given. They confirm the idea for the proposal of the new U-D 2 O criticality benchmark system and support the intention to include this system in the next edition of the recent OECD/NEA Project: International Handbook of Evaluated Criticality Safety Experiment, in near future. (author)

Benchmarking specialty hospitals, a scoping review on theory and practice.

Science.gov (United States)

Wind, A; van Harten, W H

2017-04-04

Although benchmarking may improve hospital processes, research on this subject is limited. The aim of this study was to provide an overview of publications on benchmarking in specialty hospitals and a description of study characteristics. We searched PubMed and EMBASE for articles published in English in the last 10 years. Eligible articles described a project stating benchmarking as its objective and involving a specialty hospital or specific patient category; or those dealing with the methodology or evaluation of benchmarking. Of 1,817 articles identified in total, 24 were included in the study. Articles were categorized into: pathway benchmarking, institutional benchmarking, articles on benchmark methodology or -evaluation and benchmarking using a patient registry. There was a large degree of variability:(1) study designs were mostly descriptive and retrospective; (2) not all studies generated and showed data in sufficient detail; and (3) there was variety in whether a benchmarking model was just described or if quality improvement as a consequence of the benchmark was reported upon. Most of the studies that described a benchmark model described the use of benchmarking partners from the same industry category, sometimes from all over the world. Benchmarking seems to be more developed in eye hospitals, emergency departments and oncology specialty hospitals. Some studies showed promising improvement effects. However, the majority of the articles lacked a structured design, and did not report on benchmark outcomes. In order to evaluate the effectiveness of benchmarking to improve quality in specialty hospitals, robust and structured designs are needed including a follow up to check whether the benchmark study has led to improvements.

Full sphere hydrodynamic and dynamo benchmarks

KAUST Repository

Marti, P.

2014-01-26

Convection in planetary cores can generate fluid flow and magnetic fields, and a number of sophisticated codes exist to simulate the dynamic behaviour of such systems. We report on the first community activity to compare numerical results of computer codes designed to calculate fluid flow within a whole sphere. The flows are incompressible and rapidly rotating and the forcing of the flow is either due to thermal convection or due to moving boundaries. All problems defined have solutions that alloweasy comparison, since they are either steady, slowly drifting or perfectly periodic. The first two benchmarks are defined based on uniform internal heating within the sphere under the Boussinesq approximation with boundary conditions that are uniform in temperature and stress-free for the flow. Benchmark 1 is purely hydrodynamic, and has a drifting solution. Benchmark 2 is a magnetohydrodynamic benchmark that can generate oscillatory, purely periodic, flows and magnetic fields. In contrast, Benchmark 3 is a hydrodynamic rotating bubble benchmark using no slip boundary conditions that has a stationary solution. Results from a variety of types of code are reported, including codes that are fully spectral (based on spherical harmonic expansions in angular coordinates and polynomial expansions in radius), mixed spectral and finite difference, finite volume, finite element and also a mixed Fourier-finite element code. There is good agreement between codes. It is found that in Benchmarks 1 and 2, the approximation of a whole sphere problem by a domain that is a spherical shell (a sphere possessing an inner core) does not represent an adequate approximation to the system, since the results differ from whole sphere results. © The Authors 2014. Published by Oxford University Press on behalf of The Royal Astronomical Society.

Your Golden Jubilee Party!

CERN Multimedia

2004-01-01

All staff are invited to the Golden Jubilee Staff Party on the evening of 17 September. To mark CERN's 50th anniversary, the Director General would like to invite all staff working at CERN to celebrate the success of the organization. The party will be held on the terrace of the Main Building on 17 September at 4:00 pm. The event will include an address by the DG, music, film clips, drinks and snacks! Your effort, hard work and enthusiasm have been the key to CERN's success. The first of the main events celebrating the organization's Golden Jubilee is for you, so come along and celebrate! http://www.cern.ch/cern50/

Your Golden Jubilee Party!

CERN Multimedia

2004-01-01

All staff are invited to the Golden Jubilee Staff Party on the evening of 17 September To mark CERN's 50th anniversary, the Director General would like to invite all staff working at CERN to celebrate the success of the organization. The party will be held on the terrace of the Main Building on 17 September at 4:00 pm. The event will include an address by the DG, music, film clips, drinks and snacks. Your effort, hard work and enthusiasm have been the key to CERN's success. The first of the main events celebrating the organization's Golden Jubilee is for you, so come along and celebrate! http://www.cern.ch/cern50/

Development of a California commercial building benchmarking database

International Nuclear Information System (INIS)

Kinney, Satkartar; Piette, Mary Ann

2002-01-01

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database

How benchmarking can improve patient nutrition.

Science.gov (United States)

Ellis, Jane

Benchmarking is a tool that originated in business to enable organisations to compare their services with industry-wide best practice. Early last year the Department of Health published The Essence of Care, a benchmarking toolkit adapted for use in health care. It focuses on eight elements of care that are crucial to patients' experiences. Nurses and other health care professionals at a London NHS trust have begun a trust-wide benchmarking project. The aim is to improve patients' experiences of health care by sharing and comparing information, and by identifying examples of good practice and areas for improvement. The project began with two of the eight elements of The Essence of Care, with the intention of covering the rest later. This article describes the benchmarking process for nutrition and some of the consequent improvements in care.

XWeB: The XML Warehouse Benchmark

Science.gov (United States)

Mahboubi, Hadj; Darmont, Jérôme

With the emergence of XML as a standard for representing business data, new decision support applications are being developed. These XML data warehouses aim at supporting On-Line Analytical Processing (OLAP) operations that manipulate irregular XML data. To ensure feasibility of these new tools, important performance issues must be addressed. Performance is customarily assessed with the help of benchmarks. However, decision support benchmarks do not currently support XML features. In this paper, we introduce the XML Warehouse Benchmark (XWeB), which aims at filling this gap. XWeB derives from the relational decision support benchmark TPC-H. It is mainly composed of a test data warehouse that is based on a unified reference model for XML warehouses and that features XML-specific structures, and its associate XQuery decision support workload. XWeB's usage is illustrated by experiments on several XML database management systems.

13 CFR 120.920 - Required participation by the Third Party Lender.

Science.gov (United States)

2010-01-01

...) Third Party Loan collateral. Third Party Loans usually are collateralized by a first lien on the Project... BUSINESS LOANS Development Company Loan Program (504) Third Party Loans § 120.920 Required participation by the Third Party Lender. (a) Amount of Third Party Loans. A Project financing must include one or more...

Crossing boundaries : Involving external parties in innovation

NARCIS (Netherlands)

Slot, J.H.

2013-01-01

To improve the return on investments in innovation, firms increasingly open up their new product development (NPD) processes by inviting external parties to participate. This dissertation focuses on the involvement of three different types of external parties in the NPD process: suppliers,

IAEA sodium void reactivity benchmark calculations

International Nuclear Information System (INIS)

Hill, R.N.; Finck, P.J.

1992-01-01

In this paper, the IAEA-1 992 ''Benchmark Calculation of Sodium Void Reactivity Effect in Fast Reactor Core'' problem is evaluated. The proposed design is a large axially heterogeneous oxide-fueled fast reactor as described in Section 2; the core utilizes a sodium plenum above the core to enhance leakage effects. The calculation methods used in this benchmark evaluation are described in Section 3. In Section 4, the calculated core performance results for the benchmark reactor model are presented; and in Section 5, the influence of steel and interstitial sodium heterogeneity effects is estimated

Benchmark Imagery FY11 Technical Report

Energy Technology Data Exchange (ETDEWEB)

Roberts, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pope, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-06-14

This report details the work performed in FY11 under project LL11-GS-PD06, “Benchmark Imagery for Assessing Geospatial Semantic Extraction Algorithms.” The original LCP for the Benchmark Imagery project called for creating a set of benchmark imagery for verifying and validating algorithms that extract semantic content from imagery. More specifically, the first year was slated to deliver real imagery that had been annotated, the second year to deliver real imagery that had composited features, and the final year was to deliver synthetic imagery modeled after the real imagery.

Major trends in party system in Ukraine for 1998-2014 years

Directory of Open Access Journals (Sweden)

D. K. Nosenko

2015-01-01

Full Text Available The current party system of Ukraine, defined its main features and trends with regard of parliamentary elections 2014 was investigated. The classification, which distinguish the parliamentary system was determined. It is established that the party system has undergone significant changes compared to previous years. Thus, according to classification Mayra Ukrainian party system evolved from a secondary party system to a system of small parties because the two largest parties have 47.5% of votes in parliament. Meyer’s Index fell by almost a factor of 2, indicating that the party system became more competitive, the process of forming a coalition will be longer, and the stability of the government will be lower than in previous years. The calculated effective indices of the number of parties suggested Laakso, Taagepera and Golosov also show that the party system became more fragmented. Based on the analyzed results of parliamentary elections for 1998­2014 years, it has found that increasing or decreasing the percentage threshold of 1%, not significantly affected by the number of parties represented in Parliament; none of the parties could not be present in every convocation; there is uncertainty in electoral preferences.

The VENUS-7 benchmarks. Results from state-of-the-art transport codes and nuclear data

International Nuclear Information System (INIS)

Zwermann, Winfried; Pautz, Andreas; Timm, Wolf

2010-01-01

For the validation of both nuclear data and computational methods, comparisons with experimental data are necessary. Most advantageous are assemblies where not only the multiplication factors or critical parameters were measured, but also additional quantities like reactivity differences or pin-wise fission rate distributions have been assessed. Currently there is a comprehensive activity to evaluate such measure-ments and incorporate them in the International Handbook of Evaluated Reactor Physics Benchmark Experiments. A large number of such experiments was performed at the VENUS zero power reactor at SCK/CEN in Belgium in the sixties and seventies. The VENUS-7 series was specified as an international benchmark within the OECD/NEA Working Party on Scientific Issues of Reactor Systems (WPRS), and results obtained with various codes and nuclear data evaluations were summarized. In the present paper, results of high-accuracy transport codes with full spatial resolution with up-to-date nuclear data libraries from the JEFF and ENDF/B evaluations are presented. The comparisons of the results, both code-to-code and with the measured data are augmented by uncertainty and sensitivity analyses with respect to nuclear data uncertainties. For the multiplication factors, these are performed with the TSUNAMI-3D code from the SCALE system. In addition, uncertainties in the reactivity differences are analyzed with the TSAR code which is available from the current SCALE-6 version. (orig.)

Review for session K - benchmarks

International Nuclear Information System (INIS)

McCracken, A.K.

1980-01-01

Eight of the papers to be considered in Session K are directly concerned, at least in part, with the Pool Critical Assembly (P.C.A.) benchmark at Oak Ridge. The remaining seven papers in this session, the subject of this review, are concerned with a variety of topics related to the general theme of Benchmarks and will be considered individually

Modelling the dynamics of two political parties in the presence of switching.

Science.gov (United States)

Nyabadza, F; Alassey, Tobge Yawo; Muchatibaya, Gift

2016-01-01

This paper generalizes the model proposed by Misra, by considering switching between political parties. In the model proposed, the movements of members from political party B to political party C and vice versa, are considered but the net movement is considered by assuming that [Formula: see text] (a constant), which implies that the movement of members is either from party B to party C or from party C to party B. In this paper we remodel these movements through switching functions to capture how individuals switch between parties. The results provide a more comprehensive synopsis of the dynamics between two political parties.

Tourism Destination Benchmarking: Evaluation and Selection of the Benchmarking Partners

Directory of Open Access Journals (Sweden)

Luštický Martin

2012-03-01

Full Text Available Tourism development has an irreplaceable role in regional policy of almost all countries. This is due to its undeniable benefits for the local population with regards to the economic, social and environmental sphere. Tourist destinations compete for visitors at tourism market and subsequently get into a relatively sharp competitive struggle. The main goal of regional governments and destination management institutions is to succeed in this struggle by increasing the competitiveness of their destination. The quality of strategic planning and final strategies is a key factor of competitiveness. Even though the tourism sector is not the typical field where the benchmarking methods are widely used, such approaches could be successfully applied. The paper focuses on key phases of the benchmarking process which lies in the search for suitable referencing partners. The partners are consequently selected to meet general requirements to ensure the quality if strategies. Following from this, some specific characteristics are developed according to the SMART approach. The paper tests this procedure with an expert evaluation of eight selected regional tourism strategies of regions in the Czech Republic, Slovakia and Great Britain. In this way it validates the selected criteria in the frame of the international environment. Hence, it makes it possible to find strengths and weaknesses of selected strategies and at the same time facilitates the discovery of suitable benchmarking partners.

Benchmarking foreign electronics technologies

Energy Technology Data Exchange (ETDEWEB)

Bostian, C.W.; Hodges, D.A.; Leachman, R.C.; Sheridan, T.B.; Tsang, W.T.; White, R.M.

1994-12-01

This report has been drafted in response to a request from the Japanese Technology Evaluation Center`s (JTEC) Panel on Benchmarking Select Technologies. Since April 1991, the Competitive Semiconductor Manufacturing (CSM) Program at the University of California at Berkeley has been engaged in a detailed study of quality, productivity, and competitiveness in semiconductor manufacturing worldwide. The program is a joint activity of the College of Engineering, the Haas School of Business, and the Berkeley Roundtable on the International Economy, under sponsorship of the Alfred P. Sloan Foundation, and with the cooperation of semiconductor producers from Asia, Europe and the United States. Professors David A. Hodges and Robert C. Leachman are the project`s Co-Directors. The present report for JTEC is primarily based on data and analysis drawn from that continuing program. The CSM program is being conducted by faculty, graduate students and research staff from UC Berkeley`s Schools of Engineering and Business, and Department of Economics. Many of the participating firms are represented on the program`s Industry Advisory Board. The Board played an important role in defining the research agenda. A pilot study was conducted in 1991 with the cooperation of three semiconductor plants. The research plan and survey documents were thereby refined. The main phase of the CSM benchmarking study began in mid-1992 and will continue at least through 1997. reports are presented on the manufacture of integrated circuits; data storage; wireless technology; human-machine interfaces; and optoelectronics. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Statistical benchmarking in utility regulation: Role, standards and methods

International Nuclear Information System (INIS)

Newton Lowry, Mark; Getachew, Lullit

2009-01-01

Statistical benchmarking is being used with increasing frequency around the world in utility rate regulation. We discuss how and where benchmarking is in use for this purpose and the pros and cons of regulatory benchmarking. We then discuss alternative performance standards and benchmarking methods in regulatory applications. We use these to propose guidelines for the appropriate use of benchmarking in the rate setting process. The standards, which we term the competitive market and frontier paradigms, have a bearing on method selection. These along with regulatory experience suggest that benchmarking can either be used for prudence review in regulation or to establish rates or rate setting mechanisms directly

Third party objection and action against enforcement: Request for exclusion

Directory of Open Access Journals (Sweden)

Salma Marija

2014-01-01

Full Text Available This paper deals with a right of a third party to prevent enforcement on the basis of a claim and evidence that rights or assets seized in enforcement proceeding belong to him (third party and not to the enforcement debtor. In most of jurisdictions that were subject of analysis of this paper, this right of a third party is exercised by filing an objection to the court conducting enforcement proceedings. The claim of the third party is directed towards the enforcement creditor as well as against the enforcement debtor. In the event the claim of the third party is being contested, the court instructs the third party to initiate litigation proceedings for determining whether the third party is entitled to exclusion of such rights or assets from enforcement, especially if such third party holds property rights or some other rights over the assets that are being subject to enforcement proceedings. In majority of analyzed jurisdictions, enforcement proceedings are being suspended provided the third party, in the objection being filed makes prima facie likely, on the basis of credible evidence, that his assets were seized in the enforcement proceedings. However, according to the law of the Republic of Serbia, a credible objection of a third party does not result in suspension of enforcement proceedings, something that is being criticized in this paper. As a result of this provision of the law, a bona fide third party is forced to endure the enforcement although his claim has been made likely and subsequently confirmed in the litigation proceedings. The author, in particular, points to the legal consequences of mala fide enforcement creditor that knew that the assets that are being subject of the enforcement proceedings do not belong to the enforcement debtor. The author is of the opinion that, in such cases, the enforcement creditor should be obliged to pay to the third party damages that such party suffered as a result of enforcement proceedings being

Development of a California commercial building benchmarking database

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2002-05-17

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database.

Public Funding of Political Parties

DEFF Research Database (Denmark)

Ortuno-Ortin, Ignacio; Schultz, Christian

This paper concerns public funding of parties. Parteis receive public funds depending on their vote share. Funds finance electoral campaigns. Two cases are investigated. In the first, some voters are policy motivated and some are ?impressionable? ? their vote depends directly on campaign...... expenditures. In the second, campaigning is informative and all voters are policy motivated. Public funds increase policy convergence in both cases. The effect is larger, the more funding depends on vote shares. When campaigns are informative, there may be multiple euqilibria. Intuitively, a large party can...

Bewitched - The Tea Party Movement

DEFF Research Database (Denmark)

Ashbee, Edward

2011-01-01

This article considers the development of the Tea Party movement, the character of its thinking and the nature of the interests and constituencies to which it is tied. The article suggests that despite the importance of ideas and interests, and the process of interaction between them, the movement....... The political friction that this creates has contributed to the anger that has characterised the movement. While the Tea Party movement may, as such, have only an ephemeral existence, independent conservatives are likely to remain a significant and potent constituency and will, within the institutional...

Structural code benchmarking for the analysis of impact response of nuclear material shipping casks

International Nuclear Information System (INIS)

Glass, R.E.

1984-01-01

The Transportation Technology Center at Sandia National Laboratories has initiated a program to benchmark thermal and structural codes that are available to the nuclear material transportation community. The program consists of the following five phrases: (1) code inventory and review, (2) development of a cask-like set of problems, (3) multiple independent numerical analyses of the problems, (4) transfer of information, and (5) performance of experiments to obtain data for comparison with the numerical analyses. This paper will summarize the results obtained by the independent numerical analyses. The analyses indicate the variability that can be expected both due to differences in user-controlled parameters and from code-to-code differences. The results show that in purely elastic analyses, differences can be attributed to user controlled parameters. Model problems involving elastic/plastic material behavior and large deformations, however, have greater variability with significant differences reported for implicit and explicit integration schemes in finite element programs. This variability demonstrates the need to obtain experimental data to properly benchmark codes utilizing elastic/plastic material models and large deformation capability

Development of solutions to benchmark piping problems

Energy Technology Data Exchange (ETDEWEB)

Reich, M; Chang, T Y; Prachuktam, S; Hartzman, M

1977-12-01

Benchmark problems and their solutions are presented. The problems consist in calculating the static and dynamic response of selected piping structures subjected to a variety of loading conditions. The structures range from simple pipe geometries to a representative full scale primary nuclear piping system, which includes the various components and their supports. These structures are assumed to behave in a linear elastic fashion only, i.e., they experience small deformations and small displacements with no existing gaps, and remain elastic through their entire response. The solutions were obtained by using the program EPIPE, which is a modification of the widely available program SAP IV. A brief outline of the theoretical background of this program and its verification is also included.

Flawed Political Party Primaries In Nigeria's Fourth Republic: The ...

African Journals Online (AJOL)

African Journal for the Psychological Study of Social Issues ... However, through an assessment of extant secondary data, this paper submits that the experience in the Peoples Democratic Party; the ruling party, during the 2007 General Elections was a case of deliberate imposition of candidates by powerful party leaders.

IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

International Nuclear Information System (INIS)

Orbovic, Nebojsa; Tarallo, Francois; Rambach, Jean-Mathieu; Sagals, Genadijs; Blahoianu, Andrei

2015-01-01

A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

Energy Technology Data Exchange (ETDEWEB)

Orbovic, Nebojsa, E-mail: nebojsa.orbovic@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada); Tarallo, Francois [IRSN, Fontenay aux Roses (France); Rambach, Jean-Mathieu [Géodynamique et Structures, Bagneux (France); Sagals, Genadijs; Blahoianu, Andrei [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2015-12-15

A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

40 CFR 141.172 - Disinfection profiling and benchmarking.

Science.gov (United States)

2010-07-01

... benchmarking. 141.172 Section 141.172 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Disinfection-Systems Serving 10,000 or More People § 141.172 Disinfection profiling and benchmarking. (a... sanitary surveys conducted by the State. (c) Disinfection benchmarking. (1) Any system required to develop...

Raising Quality and Achievement. A College Guide to Benchmarking.

Science.gov (United States)

Owen, Jane

This booklet introduces the principles and practices of benchmarking as a way of raising quality and achievement at further education colleges in Britain. Section 1 defines the concept of benchmarking. Section 2 explains what benchmarking is not and the steps that should be taken before benchmarking is initiated. The following aspects and…

Prismatic Core Coupled Transient Benchmark

International Nuclear Information System (INIS)

Ortensi, J.; Pope, M.A.; Strydom, G.; Sen, R.S.; DeHart, M.D.; Gougar, H.D.; Ellis, C.; Baxter, A.; Seker, V.; Downar, T.J.; Vierow, K.; Ivanov, K.

2011-01-01

The Prismatic Modular Reactor (PMR) is one of the High Temperature Reactor (HTR) design concepts that have existed for some time. Several prismatic units have operated in the world (DRAGON, Fort St. Vrain, Peach Bottom) and one unit is still in operation (HTTR). The deterministic neutronics and thermal-fluids transient analysis tools and methods currently available for the design and analysis of PMRs have lagged behind the state of the art compared to LWR reactor technologies. This has motivated the development of more accurate and efficient tools for the design and safety evaluations of the PMR. In addition to the work invested in new methods, it is essential to develop appropriate benchmarks to verify and validate the new methods in computer codes. The purpose of this benchmark is to establish a well-defined problem, based on a common given set of data, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events. The benchmark-working group is currently seeking OECD/NEA sponsorship. This benchmark is being pursued and is heavily based on the success of the PBMR-400 exercise.

Benchmarking and Performance Management

Directory of Open Access Journals (Sweden)

Adrian TANTAU

2010-12-01

Full Text Available The relevance of the chosen topic is explained by the meaning of the firm efficiency concept - the firm efficiency means the revealed performance (how well the firm performs in the actual market environment given the basic characteristics of the firms and their markets that are expected to drive their profitability (firm size, market power etc.. This complex and relative performance could be due to such things as product innovation, management quality, work organization, some other factors can be a cause even if they are not directly observed by the researcher. The critical need for the management individuals/group to continuously improve their firm/company’s efficiency and effectiveness, the need for the managers to know which are the success factors and the competitiveness determinants determine consequently, what performance measures are most critical in determining their firm’s overall success. Benchmarking, when done properly, can accurately identify both successful companies and the underlying reasons for their success. Innovation and benchmarking firm level performance are critical interdependent activities. Firm level variables, used to infer performance, are often interdependent due to operational reasons. Hence, the managers need to take the dependencies among these variables into account when forecasting and benchmarking performance. This paper studies firm level performance using financial ratio and other type of profitability measures. It uses econometric models to describe and then propose a method to forecast and benchmark performance.

Christmas party

CERN Multimedia

Staff Association

2011-01-01

The Christmas party organized by the Staff Association took place on Saturday 3 December. 200 children from 5 to 7 years old attended a magic show which filled them with wonder. Then they were served a snack in the Novae restaurant. Finally, just before their parents came to pick them up, Father Christmas gave them a present. The Staff Association wishes you a Merry Christmas and a Happy New Year!

Benchmarking of refinery emissions performance : Executive summary

International Nuclear Information System (INIS)

2003-07-01

This study was undertaken to collect emissions performance data for Canadian and comparable American refineries. The objective was to examine parameters that affect refinery air emissions performance and develop methods or correlations to normalize emissions performance. Another objective was to correlate and compare the performance of Canadian refineries to comparable American refineries. For the purpose of this study, benchmarking involved the determination of levels of emission performance that are being achieved for generic groups of facilities. A total of 20 facilities were included in the benchmarking analysis, and 74 American refinery emission correlations were developed. The recommended benchmarks, and the application of those correlations for comparison between Canadian and American refinery performance, were discussed. The benchmarks were: sulfur oxides, nitrogen oxides, carbon monoxide, particulate, volatile organic compounds, ammonia and benzene. For each refinery in Canada, benchmark emissions were developed. Several factors can explain differences in Canadian and American refinery emission performance. 4 tabs., 7 figs

How to Advance TPC Benchmarks with Dependability Aspects

Science.gov (United States)

Almeida, Raquel; Poess, Meikel; Nambiar, Raghunath; Patil, Indira; Vieira, Marco

Transactional systems are the core of the information systems of most organizations. Although there is general acknowledgement that failures in these systems often entail significant impact both on the proceeds and reputation of companies, the benchmarks developed and managed by the Transaction Processing Performance Council (TPC) still maintain their focus on reporting bare performance. Each TPC benchmark has to pass a list of dependability-related tests (to verify ACID properties), but not all benchmarks require measuring their performances. While TPC-E measures the recovery time of some system failures, TPC-H and TPC-C only require functional correctness of such recovery. Consequently, systems used in TPC benchmarks are tuned mostly for performance. In this paper we argue that nowadays systems should be tuned for a more comprehensive suite of dependability tests, and that a dependability metric should be part of TPC benchmark publications. The paper discusses WHY and HOW this can be achieved. Two approaches are introduced and discussed: augmenting each TPC benchmark in a customized way, by extending each specification individually; and pursuing a more unified approach, defining a generic specification that could be adjoined to any TPC benchmark.

Party-political and electoral system of Uruguay

Directory of Open Access Journals (Sweden)

Samuel Decresci

2015-06-01

Full Text Available The Oriental Republic of Uruguay is seen by many as a pioneer among Latin American nations to modernize its state and its policy. Since the late nineteenth century to the twentieth, Uruguayan political actors operate significant changes such as the separation of church and state, labor regulation, divorce law, women's vote, etc. Because of this and the progressive modernization, it was called the “Switzerland of the Americas”. Today, it still stands out in this area by regularizing abortion, homoaffective marriage, liberalization and access to marijuana. Moreover, noteworthy that such measures were achieved largely because of governance that the executive enjoys in the midst of this political system. Thus, this work aims to analyze such Uruguayan political system. In short, a political system is understood by the government system, the electoral system and the party system. That said, it will be analyzed in the political scenario of the country, their characteristics, party and election rules, political parties, party dynamics and relations between the powers.

ZZ ECN-BUBEBO, ECN-Petten Burnup Benchmark Book, Inventories, Afterheat

International Nuclear Information System (INIS)

Kloosterman, Jan Leen

1999-01-01

Description of program or function: Contains experimental benchmarks which can be used for the validation of burnup code systems and accompanied data libraries. Although the benchmarks presented here are thoroughly described in literature, it is in many cases not straightforward to retrieve unambiguously the correct input data and corresponding results from the benchmark Descriptions. Furthermore, results which can easily be measured, are sometimes difficult to calculate because of conversions to be made. Therefore, emphasis has been put to clarify the input of the benchmarks and to present the benchmark results in such a way that they can easily be calculated and compared. For more thorough Descriptions of the benchmarks themselves, the literature referred to here should be consulted. This benchmark book is divided in 11 chapters/files containing the following in text and tabular form: chapter 1: Introduction; chapter 2: Burnup Credit Criticality Benchmark Phase 1-B; chapter 3: Yankee-Rowe Core V Fuel Inventory Study; chapter 4: H.B. Robinson Unit 2 Fuel Inventory Study; chapter 5: Turkey Point Unit 3 Fuel Inventory Study; chapter 6: Turkey Point Unit 3 Afterheat Power Study; chapter 7: Dickens Benchmark on Fission Product Energy Release of U-235; chapter 8: Dickens Benchmark on Fission Product Energy Release of Pu-239; chapter 9: Yarnell Benchmark on Decay Heat Measurements of U-233; chapter 10: Yarnell Benchmark on Decay Heat Measurements of U-235; chapter 11: Yarnell Benchmark on Decay Heat Measurements of Pu-239

Analysis of Benchmark 2 results

International Nuclear Information System (INIS)

Bacha, F.; Lefievre, B.; Maillard, J.; Silva, J.

1994-01-01

The code GEANT315 has been compared to different codes in two benchmarks. We analyze its performances through our results, especially in the thick target case. In spite of gaps in nucleus-nucleus interaction theories at intermediate energies, benchmarks allow possible improvements of physical models used in our codes. Thereafter, a scheme of radioactive waste burning system is studied. (authors). 4 refs., 7 figs., 1 tab

Benchmarking for Best Practice

CERN Document Server

Zairi, Mohamed

1998-01-01

Benchmarking for Best Practice uses up-to-the-minute case-studies of individual companies and industry-wide quality schemes to show how and why implementation has succeeded. For any practitioner wanting to establish best practice in a wide variety of business areas, this book makes essential reading. .It is also an ideal textbook on the applications of TQM since it describes concepts, covers definitions and illustrates the applications with first-hand examples. Professor Mohamed Zairi is an international expert and leading figure in the field of benchmarking. His pioneering work in this area l

HPCG Benchmark Technical Specification

Energy Technology Data Exchange (ETDEWEB)

Heroux, Michael Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dongarra, Jack [Univ. of Tennessee, Knoxville, TN (United States); Luszczek, Piotr [Univ. of Tennessee, Knoxville, TN (United States)

2013-10-01

The High Performance Conjugate Gradient (HPCG) benchmark [cite SNL, UTK reports] is a tool for ranking computer systems based on a simple additive Schwarz, symmetric Gauss-Seidel preconditioned conjugate gradient solver. HPCG is similar to the High Performance Linpack (HPL), or Top 500, benchmark [1] in its purpose, but HPCG is intended to better represent how today’s applications perform. In this paper we describe the technical details of HPCG: how it is designed and implemented, what code transformations are permitted and how to interpret and report results.

[Do you mean benchmarking?].

Science.gov (United States)

Bonnet, F; Solignac, S; Marty, J

2008-03-01

The purpose of benchmarking is to settle improvement processes by comparing the activities to quality standards. The proposed methodology is illustrated by benchmark business cases performed inside medical plants on some items like nosocomial diseases or organization of surgery facilities. Moreover, the authors have built a specific graphic tool, enhanced with balance score numbers and mappings, so that the comparison between different anesthesia-reanimation services, which are willing to start an improvement program, is easy and relevant. This ready-made application is even more accurate as far as detailed tariffs of activities are implemented.

Benchmarking in digital circuit design automation

NARCIS (Netherlands)

Jozwiak, L.; Gawlowski, D.M.; Slusarczyk, A.S.

2008-01-01

This paper focuses on benchmarking, which is the main experimental approach to the design method and EDA-tool analysis, characterization and evaluation. We discuss the importance and difficulties of benchmarking, as well as the recent research effort related to it. To resolve several serious

Benchmarking, Total Quality Management, and Libraries.

Science.gov (United States)

Shaughnessy, Thomas W.

1993-01-01

Discussion of the use of Total Quality Management (TQM) in higher education and academic libraries focuses on the identification, collection, and use of reliable data. Methods for measuring quality, including benchmarking, are described; performance measures are considered; and benchmarking techniques are examined. (11 references) (MES)

Toxicological benchmarks for wildlife: 1994 Revision

International Nuclear Information System (INIS)

Opresko, D.M.; Sample, B.E.; Suter, G.W. II.

1994-09-01

The process by which ecological risks of environmental contaminants are evaluated is two-tiered. The first tier is a screening assessment where concentrations of contaminants in the environment are compared to toxicological benchmarks which represent concentrations of chemicals in environmental media (water, sediment, soil, food, etc.) that are presumed to be nonhazardous to the surrounding biota. The second tier is a baseline ecological risk assessment where toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. The report presents toxicological benchmarks for assessment of effects of 76 chemicals on 8 representative mammalian wildlife species and 31 chemicals on 9 avian wildlife species. The chemicals are some of those that occur at United States Department of Energy waste sites; the wildlife species were chosen because they are widely distributed and provide a representative range of body sizes and diets. Further descriptions of the chosen wildlife species and chemicals are provided in the report. The benchmarks presented in this report represent values believed to be nonhazardous for the listed wildlife species. These benchmarks only consider contaminant exposure through oral ingestion of contaminated media; exposure through inhalation or direct dermal exposure are not considered in this report

Toxicological benchmarks for wildlife: 1994 Revision

Energy Technology Data Exchange (ETDEWEB)

Opresko, D.M.; Sample, B.E.; Suter, G.W. II

1994-09-01

The process by which ecological risks of environmental contaminants are evaluated is two-tiered. The first tier is a screening assessment where concentrations of contaminants in the environment are compared to toxicological benchmarks which represent concentrations of chemicals in environmental media (water, sediment, soil, food, etc.) that are presumed to be nonhazardous to the surrounding biota. The second tier is a baseline ecological risk assessment where toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. The report presents toxicological benchmarks for assessment of effects of 76 chemicals on 8 representative mammalian wildlife species and 31 chemicals on 9 avian wildlife species. The chemicals are some of those that occur at United States Department of Energy waste sites; the wildlife species were chosen because they are widely distributed and provide a representative range of body sizes and diets. Further descriptions of the chosen wildlife species and chemicals are provided in the report. The benchmarks presented in this report represent values believed to be nonhazardous for the listed wildlife species. These benchmarks only consider contaminant exposure through oral ingestion of contaminated media; exposure through inhalation or direct dermal exposure are not considered in this report.

Secure Two-Party Computation with Low Communication

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Faust, Sebastian; Hazay, Carmit

2011-01-01

We propose a 2-party UC-secure computation protocol that can compute any function securely. The protocol requires only two messages, communication that is poly-logarithmic in the size of the circuit description of the function, and the workload for one of the parties is also only poly-logarithmic...

Third party financing of renewable energy sources

International Nuclear Information System (INIS)

1994-01-01

The Institut of Energy Saving and Diversification (IDAE) hosted the third party on financing Renewable Energy Sources in Spain. The main aspects were : 1) Experiences in renewable energy. 2) Financing of small hydro-power projects. 3) Third party financing of biomass projects. 4) Financing of wind energy projects

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-09-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR’06 are highlighted, and the future of the two projects is discussed.

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-01-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR-06 are highlighted, and the future of the two projects is discussed

Financial Integrity Benchmarks

Data.gov (United States)

City of Jackson, Mississippi — This data compiles standard financial integrity benchmarks that allow the City to measure its financial standing. It measure the City's debt ratio and bond ratings....

Analysis of a molten salt reactor benchmark

International Nuclear Information System (INIS)

Ghosh, Biplab; Bajpai, Anil; Degweker, S.B.

2013-01-01

This paper discusses results of our studies of an IAEA molten salt reactor (MSR) benchmark. The benchmark, proposed by Japan, involves burnup calculations of a single lattice cell of a MSR for burning plutonium and other minor actinides. We have analyzed this cell with in-house developed burnup codes BURNTRAN and McBURN. This paper also presents a comparison of the results of our codes and those obtained by the proposers of the benchmark. (author)

Attendance and alcohol use at parties and bars in college: a national survey of current drinkers.

Science.gov (United States)

Harford, Thomas C; Wechsler, Henry; Seibring, Mark

2002-11-01

This study examines attendance and alcohol use at parties and bars among college students by gender, residence, year in school and legal drinking age. The study participants were respondents in the 1997 and 1999 Harvard School of Public Health College Alcohol Study (CAS). The combined sample consisted of 12,830 students (61% women) who reported use of alcohol in the past 30 days prior to interview. Their responses provided information on attendance and alcohol use at parties (dormitory, fraternity, off campus) and off-campus bars. Logistic regression analyses examined the influence of gender, residence, year in school and legal drinking age related to attendance, drinking/non-drinking and heavy drinking (5 or more drinks) at each select setting. Consistent with the literature, fraternity/ sorority parties were occasions of heavy drinking (49%) among drinkers in those settings, yet they drew upon smaller proportions of students (36%) when compared to off-campus parties (75%) and off-campus bars (68%). Off-campus parties (45%) and bars (37%) were also occasions for heavy drinking among drinkers in these settings. College residence was shown to relate to differential exposure to drinking settings, but residence had less impact on the decision to drink and the level of heavy drinking. Attendance at parties decreased with advance in school years, but attendance at off-campus bars increased. Although heavy drinking at off-campus bars decreased with advancing grade year in school, slightly higher proportions of under-age students (41%) compared to students of legal drinking age (35%) exhibited heavy drinking at off-campus bars. The identification of high-risk settings and their correlates serves to better understand the development of heavy drinking on college campuses. Off-campus parties, as compared to campus parties and bars, may pose greater difficulties related to successful intervention.

Reactor fuel depletion benchmark of TINDER

International Nuclear Information System (INIS)

Martin, W.J.; Oliveira, C.R.E. de; Hecht, A.A.

2014-01-01

Highlights: • A reactor burnup benchmark of TINDER, coupling MCNP6 to CINDER2008, was performed. • TINDER is a poor candidate for fuel depletion calculations using its current libraries. • Data library modification is necessary if fuel depletion is desired from TINDER. - Abstract: Accurate burnup calculations are key to proper nuclear reactor design, fuel cycle modeling, and disposal estimations. The TINDER code, originally designed for activation analyses, has been modified to handle full burnup calculations, including the widely used predictor–corrector feature. In order to properly characterize the performance of TINDER for this application, a benchmark calculation was performed. Although the results followed the trends of past benchmarked codes for a UO 2 PWR fuel sample from the Takahama-3 reactor, there were obvious deficiencies in the final result, likely in the nuclear data library that was used. Isotopic comparisons versus experiment and past code benchmarks are given, as well as hypothesized areas of deficiency and future work

Party Governance and the Selection of Parliamentarians

NARCIS (Netherlands)

K.J. Beniers (Klaas)

2005-01-01

textabstractThis paper examines the incentives for a party leader in office and for a parties' rank-and-file to replace a sitting member of parliament. As to the leader's decision, we show that the leader prefers to replace a critical member of parliament who votes against the leader's policy. A

Parties, rituals and symbolisms in schools

Directory of Open Access Journals (Sweden)

Ana Cecilia Valencia Aguirre

2015-07-01

Full Text Available This paper aims at analyzing school parties from interaction spaces and principals’ narratives in six schools in the state of Jalisco. A party is a ritual where participants share symbols related to imaginary –hence the importance of conducting an analysis for understanding institutions as a symbolic framework. A core argument is that established actors are configured from symbolic practices in the institutional space (schools. The repetition of these practices awash with symbolism leads to daily rituals or micro rituals that are ratified in institutions. Methodologically, interviews and non-participant observation in school interaction spaces were used. Based on the findings, it may be stated that the nuclear family, rooted in the Christian image in which authority is a central point, becomes a fundamental factor in shaping institutional life as well as the imaginary linked to school parties.

A novel quantum solution to secure two-party distance computation

Science.gov (United States)

Peng, Zhen-wan; Shi, Run-hua; Wang, Pan-hong; Zhang, Shun

2018-06-01

Secure Two-Party Distance Computation is an important primitive of Secure Multiparty Computational Geometry that it involves two parties, where each party has a private point, and the two parties want to jointly compute the distance between their points without revealing anything about their respective private information. Secure Two-Party Distance Computation has very important and potential applications in settings of high secure requirements, such as privacy-preserving Determination of Spatial Location-Relation, Determination of Polygons Similarity, and so on. In this paper, we present a quantum protocol for Secure Two-Party Distance Computation by using QKD-based Quantum Private Query. The security of the protocol is based on the physical principles of quantum mechanics, instead of difficulty assumptions, and therefore, it can ensure higher security than the classical related protocols.

Candidate nomination, intra-party democracy, and election violence in Africa

DEFF Research Database (Denmark)

Seeberg, Merete Bech; Wahman, Michael; Skaaning, Svend-Erik

2018-01-01

. When local-level or national-level competition between parties is low, as in much of Africa, electoral politics become a matter of intra-party rather than inter-party competition. Nominations are a part of the electoral process often left to the discretion of poorly institutionalized parties, free......This article introduces a special issue on candidate nomination, intra-party democracy, and election violence in Africa. Although a burgeoning literature on African democratization has focused on the topic of electoral violence, little attention has been given to violence during party nominations...... of the involvement of electoral management bodies and external monitors, and violence often results. Rather than developing an elaborate theoretical framework on the causes of nomination violence, our ambition in this introduction is to introduce the concept of nomination violence and situate it in the literatures...

Secure multi-party quantum summation based on quantum Fourier transform

Science.gov (United States)

Yang, Hui-Yi; Ye, Tian-Yu

2018-06-01

In this paper, we propose a novel secure multi-party quantum summation protocol based on quantum Fourier transform, where the traveling particles are transmitted in a tree-type mode. The party who prepares the initial quantum states is assumed to be semi-honest, which means that she may misbehave on her own but will not conspire with anyone. The proposed protocol can resist both the outside attacks and the participant attacks. Especially, one party cannot obtain other parties' private integer strings; and it is secure for the colluding attack performed by at most n - 2 parties, where n is the number of parties. In addition, the proposed protocol calculates the addition of modulo d and implements the calculation of addition in a secret-by-secret way rather than a bit-by-bit way.

Benchmarking: contexts and details matter.

Science.gov (United States)

Zheng, Siyuan

2017-07-05

Benchmarking is an essential step in the development of computational tools. We take this opportunity to pitch in our opinions on tool benchmarking, in light of two correspondence articles published in Genome Biology.Please see related Li et al. and Newman et al. correspondence articles: www.dx.doi.org/10.1186/s13059-017-1256-5 and www.dx.doi.org/10.1186/s13059-017-1257-4.

Simple multi-party set reconciliation

DEFF Research Database (Denmark)

Mitzenmacher, Michael; Pagh, Rasmus

2017-01-01

 set reconciliation: two parties A1A1 and A2A2 each hold a set of keys, named S1S1 and S2S2 respectively, and the goal is for both parties to obtain S1∪S2S1∪S2. Typically, set reconciliation is interesting algorithmically when sets are large but the set difference |S1−S2|+|S2−S1||S1−S2|+|S2−S1| is small...

A contextual analysis of party system formation in Nigeria, 1960-2011

Directory of Open Access Journals (Sweden)

Aliyu Mukhtar Katsina

2013-12-01

Full Text Available This article investigates the parties and party systems in Nigeria since independence. The article argues that the country has witnessed four different types of party systems corresponding to the four democratisation attempts that saw the emergence of constitutional governments since 1960. Special focus is awarded to the transformations of the four party systems and developments in their various institutional designs including regulating the number of parties that participate in the electoral politics of the country. In trying to achieve its objective, the article adopts chronological and thematic approaches. Chronologically, the paper investigates these party systems in successive order beginning with the First Republic when the elements of party politics were first adopted in Nigeria. Thematically, the article focuses on those issues that influenced the formation and transformation of the party systems from the First Republic in 1960 to the present Fourth Republic.

Hotel Overbooking and Cooperation with Third-Party Websites

Directory of Open Access Journals (Sweden)

Yufeng Dong

2015-08-01

Full Text Available Hotels cooperate with third-party websites to enhance their competitive position and attain sustainable development in the era of e-commerce. Furthermore, hotel managers overbook to hedge against last-minute cancellations and customer no-shows. This paper discusses pricing and overbooking strategies of a hotel in the context of cooperation with multiple third-party websites and analyzes how these strategies influence the cooperation process. The increase in profits resulting from the overbooking strategy is also examined. A model of a Stackelberg game between the hotel and third-party websites and a Nash game among the third-party websites are developed to analyze the process. Results indicate that the compensation coefficient has a slight influence on hotel pricing strategy, but causes a sharp decrease in overbooking level. As the hotel demands to lessen the probability of denying under higher compensation rate, the third-party websites would exert less sales effort to reduce the demand of online customers. Results also show that under a given market demand, hotel effort only serves to redistribute market shares among the hotel and third-party websites, without influencing hotel pricing and overbooking decisions. Specifically, the market shares of the third-party websites decrease in the effort level of the hotel resulting from an increase in the hotel market share. Finally, in the numerical example where one hotel and two websites are analyzed, hotel overbooking strategy improves hotel profit by 4.20%, whereas profit improvements for Websites 1 and 2 are as high as 5.26% and 5.21%, respectively. Managerial implications of the study are also provided.

Benchmark analysis of MCNP trademark ENDF/B-VI iron

International Nuclear Information System (INIS)

Court, J.D.; Hendricks, J.S.

1994-12-01

The MCNP ENDF/B-VI iron cross-section data was subjected to four benchmark studies as part of the Hiroshima/Nagasaki dose re-evaluation for the National Academy of Science and the Defense Nuclear Agency. The four benchmark studies were: (1) the iron sphere benchmarks from the Lawrence Livermore Pulsed Spheres; (2) the Oak Ridge National Laboratory Fusion Reactor Shielding Benchmark; (3) a 76-cm diameter iron sphere benchmark done at the University of Illinois; (4) the Oak Ridge National Laboratory Benchmark for Neutron Transport through Iron. MCNP4A was used to model each benchmark and computational results from the ENDF/B-VI iron evaluations were compared to ENDF/B-IV, ENDF/B-V, the MCNP Recommended Data Set (which includes Los Alamos National Laboratory Group T-2 evaluations), and experimental data. The results show that the ENDF/B-VI iron evaluations are as good as, or better than, previous data sets

EVA Health and Human Performance Benchmarking Study

Science.gov (United States)

Abercromby, A. F.; Norcross, J.; Jarvis, S. L.

2016-01-01

Multiple HRP Risks and Gaps require detailed characterization of human health and performance during exploration extravehicular activity (EVA) tasks; however, a rigorous and comprehensive methodology for characterizing and comparing the health and human performance implications of current and future EVA spacesuit designs does not exist. This study will identify and implement functional tasks and metrics, both objective and subjective, that are relevant to health and human performance, such as metabolic expenditure, suit fit, discomfort, suited postural stability, cognitive performance, and potentially biochemical responses for humans working inside different EVA suits doing functional tasks under the appropriate simulated reduced gravity environments. This study will provide health and human performance benchmark data for humans working in current EVA suits (EMU, Mark III, and Z2) as well as shirtsleeves using a standard set of tasks and metrics with quantified reliability. Results and methodologies developed during this test will provide benchmark data against which future EVA suits, and different suit configurations (eg, varied pressure, mass, CG) may be reliably compared in subsequent tests. Results will also inform fitness for duty standards as well as design requirements and operations concepts for future EVA suits and other exploration systems.

Report of the 33rd Japanese Antarctic Research ExpeditionーActivities of the summer party(1991-1992and wintering party(1992ー

Directory of Open Access Journals (Sweden)

Mitsuo Fukuchi

1996-03-01

Full Text Available Summer activities in the 1991/92 austral summer and winter activities in 1992 of the 33rd Japanese Antarctic Research Expedition (JARE are described. The JARE-33 consisted of 16 members of the summer party and 37 members of the wintering party (one member of the wintering party returned with the summer party. Two Brazilian fish physiologists joined the summer party based on the exchange scientist program of the Antarctic Treaty. The icebreaker SHIRASE left Tokyo on 14 November 1991 and arrived at Breid Bay on 18 December, where the closing of Asuka Camp was completed. Then she headed to Syowa Station and arrived there on 4 January 1992. Transportation of cargo by helicopter to Syowa Station was carried out between 23 December 1991 and 18 January 1992. A total of 848t of cargo, including pipe transport of light oil (342kl and freight by oversnow vehicles (215t, were transported. A new central building was constructed from 23 December to 17 February as the start of an 8-year reintegration project of Syowa Station. Three generator engines of 200kVA capacity were overhauled. Concurrently, various research programs such as absolute gravity measurement and field surveys including inland oversnow traverse were performed. However, there were some problems with a super conducting gravity meter while the gravity meter was being tested for winter operation. Therefore, one scientist working on the gravity meter who planned to winter-over decided to leave Syowa Station with the gravity meter. all of the summer party left Syowa Station on 17 February and headed to Sydney, Australia, while oceanographic and marine biological observations were carried out on board. Members of the summer party of JARE-33 and the wintering party of JARE-32 returned to Narita by air on 27 March 1992. The wintering party of JARE-33 worked at Syowa Station from 1 February 1992 to 31 January 1993. The scientific research programs cover the following four major disciplines : (1 upper

Diagnostic Algorithm Benchmarking

Science.gov (United States)

Poll, Scott

2011-01-01

A poster for the NASA Aviation Safety Program Annual Technical Meeting. It describes empirical benchmarking on diagnostic algorithms using data from the ADAPT Electrical Power System testbed and a diagnostic software framework.

Benchmarking Reference Desk Service in Academic Health Science Libraries: A Preliminary Survey.

Science.gov (United States)

Robbins, Kathryn; Daniels, Kathleen

2001-01-01

This preliminary study was designed to benchmark patron perceptions of reference desk services at academic health science libraries, using a standard questionnaire. Responses were compared to determine the library that provided the highest-quality service overall and along five service dimensions. All libraries were rated very favorably, but none…

Church parties in the Arian controversy: problems of typologization

Directory of Open Access Journals (Sweden)

Georgy Zakharov

2017-12-01

Full Text Available The article is devoted to the problems of typologization of the church parties of the 4th century. This historical phenomenon arises within the framework of a long church conflict, called the Arian crisis. The designations of the church parties used by contemporaries are polemical concepts and do not correspond to the self-consciousness of their supporters. In the early Christian heresiological tradition and in the modern historiography, the basis of church parties’ classification is their theological position. However, it is necessary to take into account other consolidating factors, such as Eucharistic communion and church-political activity. The formation of church parties, as a rule, was directly related to the development of the synodal institution. Analysis of sources in the 4th century allows us to distinguish, in addition to the extensive currents - macro-parties - claiming a universal or regional consensus based on the heritage of one of the representative and authoritative councils, some small consolidated groups - micro-parties, which gather for little councils and constantly coordinate their actions within the ecclesiastical confrontation. Micro-parties could exist both within the limits of macro-party, in many respects determining the trends of it’s development, and beyond it’s boundaries. In the latter case, it is actually a marginal church group rallied around one or more extraordinary theologian, sometimes even without the episcopal rank.

MoMaS reactive transport benchmark using PFLOTRAN

Science.gov (United States)

Park, H.

2017-12-01

MoMaS benchmark was developed to enhance numerical simulation capability for reactive transport modeling in porous media. The benchmark was published in late September of 2009; it is not taken from a real chemical system, but realistic and numerically challenging tests. PFLOTRAN is a state-of-art massively parallel subsurface flow and reactive transport code that is being used in multiple nuclear waste repository projects at Sandia National Laboratories including Waste Isolation Pilot Plant and Used Fuel Disposition. MoMaS benchmark has three independent tests with easy, medium, and hard chemical complexity. This paper demonstrates how PFLOTRAN is applied to this benchmark exercise and shows results of the easy benchmark test case which includes mixing of aqueous components and surface complexation. Surface complexations consist of monodentate and bidentate reactions which introduces difficulty in defining selectivity coefficient if the reaction applies to a bulk reference volume. The selectivity coefficient becomes porosity dependent for bidentate reaction in heterogeneous porous media. The benchmark is solved by PFLOTRAN with minimal modification to address the issue and unit conversions were made properly to suit PFLOTRAN.

Benchmarking of the FENDL-3 Neutron Cross-Section Data Library for Fusion Applications

International Nuclear Information System (INIS)

Fischer, U.; Kondo, K.; Angelone, M.; Batistoni, P.; Villari, R.; Bohm, T.; Sawan, M.; Walker, B.; Konno, C.

2014-03-01

This report summarizes the benchmark analyses performed in a joint effort of ENEA (Italy), JAEA (Japan), KIT (Germany), and the University of Wisconsin (USA) with the objective to test and qualify the neutron induced general purpose FENDL-3.0 data library for fusion applications. The benchmark approach consisted of two major steps including the analysis of a simple ITER-like computational benchmark, and a series of analyses of benchmark experiments conducted previously at the 14 MeV neutron generator facilities at ENEA Frascati, Italy (FNG) and JAEA, Tokai-mura, Japan (FNS). The computational benchmark revealed a modest increase of the neutron flux levels in the deep penetration regions and a substantial increase of the gas production in steel components. The comparison to experimental results showed good agreement with no substantial differences between FENDL-3.0 and FENDL-2.1 for most of the responses analysed. There is a slight trend, however, for an increase of the fast neutron flux in the shielding experiment and a decrease in the breeder mock-up experiments. The photon flux spectra measured in the bulk shield and the tungsten experiments are significantly better reproduced with FENDL-3.0 data. In general, FENDL-3, as compared to FENDL-2.1, shows an improved performance for fusion neutronics applications. It is thus recommended to ITER to replace FENDL-2.1 as reference data library for neutronics calculation by FENDL-3.0. (author)

Benchmarking time-dependent neutron problems with Monte Carlo codes

International Nuclear Information System (INIS)

Couet, B.; Loomis, W.A.

1990-01-01

Many nuclear logging tools measure the time dependence of a neutron flux in a geological formation to infer important properties of the formation. The complex geometry of the tool and the borehole within the formation does not permit an exact deterministic modelling of the neutron flux behaviour. While this exact simulation is possible with Monte Carlo methods the computation time does not facilitate quick turnaround of results useful for design and diagnostic purposes. Nonetheless a simple model based on the diffusion-decay equation for the flux of neutrons of a single energy group can be useful in this situation. A combination approach where a Monte Carlo calculation benchmarks a deterministic model in terms of the diffusion constants of the neutrons propagating in the media and their flux depletion rates thus offers the possibility of quick calculation with assurance as to accuracy. We exemplify this approach with the Monte Carlo benchmarking of a logging tool problem, showing standoff and bedding response. (author)

Benchmarking Non-Hardware Balance-of-System (Soft) Costs for U.S. Photovoltaic Systems Using a Bottom-Up Approach and Installer Survey

Energy Technology Data Exchange (ETDEWEB)

Ardani, Kristen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Feldman, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ong, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-11-01

This report presents results from the first U.S. Department of Energy (DOE) sponsored, bottom-up data-collection and analysis of non-hardware balance-of-system costs—often referred to as “business process” or “soft” costs—for residential and commercial photovoltaic (PV) systems. Annual expenditure and labor-hour-productivity data are analyzed to benchmark 2010 soft costs related to the DOE priority areas of (1) customer acquisition; (2) permitting, inspection, and interconnection; (3) installation labor; and (4) installer labor for arranging third-party financing. Annual expenditure and labor-hour data were collected from 87 PV installers. After eliminating outliers, the survey sample consists of 75 installers, representing approximately 13% of all residential PV installations and 4% of all commercial installations added in 2010. Including assumed permitting fees, in 2010 the average soft costs benchmarked in this analysis total $1.50/W for residential systems (ranging from $0.66/W to $1.66/W between the 20th and 80th percentiles). For commercial systems, the median 2010 benchmarked soft costs (including assumed permitting fees) are $0.99/W for systems smaller than 250 kW (ranging from $0.51/W to $1.45/W between the 20th and 80th percentiles) and $0.25/W for systems larger than 250 kW (ranging from $0.17/W to $0.78/W between the 20th and 80th percentiles). Additional soft costs not benchmarked in the present analysis (e.g., installer profit, overhead, financing, and contracting) are significant and would add to these figures. The survey results provide a benchmark for measuring—and helping to accelerate—progress over the next decade toward achieving the DOE SunShot Initiative’s soft-cost-reduction targets. We conclude that the selected non-hardware business processes add considerable cost to U.S. PV systems, constituting 23% of residential PV system price, 17% of small commercial system price, and 5% of large commercial system price (in 2010

Criteria of benchmark selection for efficient flexible multibody system formalisms

Directory of Open Access Journals (Sweden)

Valášek M.

2007-10-01

Full Text Available The paper deals with the selection process of benchmarks for testing and comparing efficient flexible multibody formalisms. The existing benchmarks are briefly summarized. The purposes for benchmark selection are investigated. The result of this analysis is the formulation of the criteria of benchmark selection for flexible multibody formalisms. Based on them the initial set of suitable benchmarks is described. Besides that the evaluation measures are revised and extended.

Criticality safety benchmarking of PASC-3 and ECNJEF1.1

International Nuclear Information System (INIS)

Li, J.

1992-09-01

To validate the code system PASC-3 and the multigroup cross section library ECNJEF1.1 on various applications many benchmarks are required. This report presents the results of critically safety benchmarking for five calculational and four experimental benchmarks. These benchmarks are related to the transport package of fissile materials such as spent fuel. The fissile nuclides in these benchmarks are 235 U and 239 Pu. The modules of PASC-3 which have been used for the calculations are BONAMI, NITAWL and KENO.5A. The final results for the experimental benchmarks do agree well with experimental data. For the calculational benchmarks the results presented here are in reasonable agreement with the results from other investigations. (author). 8 refs.; 20 figs.; 5 tabs

The value of political parties to representative democracy

NARCIS (Netherlands)

Kölln, Ann-Kristin

2015-01-01

Political parties play a major role in democratic processes around the world. Recent empirical research suggests that parties are increasingly less important to citizens. Simultaneously, classic and contemporary theories of representative democracy specifically still minimally incorporate accounts

Second review meeting of the Contracting Parties to the Convention on Nuclear Safety

International Nuclear Information System (INIS)

Rafferty, Barbara

2002-01-01

Parties with a nuclear power programme have in place integrated emergency response plans

Revaluering benchmarking - A topical theme for the construction industry

OpenAIRE

Rasmussen, Grane Mikael Gregaard

2011-01-01

Over the past decade, benchmarking has increasingly gained foothold in the construction industry. The predominant research, perceptions and uses of benchmarking are valued so strongly and uniformly, that what may seem valuable, is actually abstaining researchers and practitioners from studying and questioning the concept objectively. This paper addresses the underlying nature of benchmarking, and accounts for the importance of focusing attention on the sociological impacts benchmarking has in...

From Party Systems to Party Organizations: The Adaptation of Latin American Parties to Changing Environments De sistemas partidarios a la organización partidaria. La adaptación de partidos latinoamericanos a ambientes cambiantes

Directory of Open Access Journals (Sweden)

Laura Wills-Otero

2009-04-01

Full Text Available Review Article:Alcántara Sáez, Manuel (ed. (2008, Politicians and Politics in Latin America, Boulder: Lynne Rienner Publishers. Greene, Kenneth F. (2007, Why Dominant Parties Lose. Mexico’s Democratization in Comparative Perspective, New York: Cambridge University Press. Levitsky, Steven (2003, Transforming Labor-based Parties in Latin America: Argentine Peronism in Comparative Perspective, New York: Cambridge University Press. The study of party systems and political parties is one of the largest subfields in political science. Classic studies in advanced democracies focused primarily on party systems and developed theories about the causes and consequences of different types of systems. In recent years, new academic work begun to differentiate parties within systems by understanding their organizational structure, their internal dynamics, the different ways in which they interact with their constituencies, and the strategies that they use to attract voters. Studies show that parties within the same system behave and react differently given their internal conditions. This article reviews three scholarly books that deal with this issue. The works analyze the internal dynamics of Latin American political parties and their capacity to respond and adapt their structures when environmental challenges take place. Review Article:Alcántara Sáez, Manuel (ed. (2008, Politicians and Politics in Latin America, Boulder: Lynne Rienner Publishers. Greene, Kenneth F. (2007, Why Dominant Parties Lose. Mexico���s Democratization in Comparative Perspective, New York: Cambridge University Press. Levitsky, Steven (2003, Transforming Labor-based Parties in Latin America: Argentine Peronism in Comparative Perspective, New York: Cambridge University Press. El estudio de los sistemas de partidos y partidos políticos es una de las áreas más amplias en la ciencia política. Trabajos clásicos llevados a cabo en democracias avanzadas, enfocaron su atenci

Monopolizing, Mutualizing, or Muddling Through: Factions and Party Management in Contemporary Thailand

Directory of Open Access Journals (Sweden)

Paul W. Chambers

2010-01-01

Full Text Available In democracies throughout the world, intra-party factions manifest themselves in parties and governments. Formal and informal institutions have, however, proved crucial in managing factionalism. This is especially true in Thailand’s emerging parliamentary democracy where the management of factionalism has become a major objective for Thai parties. This study explores factions and factionalism as well as how different types of parties try to manage intra-party dissension especially in the case of Thailand. The findings suggest that management style tends to be a function of a party’s organization, with parties which practice a collegial style tending to be the more successful in controlling intra-party cliques over time. At the same time, the most important tools which party leaderships can use to control factions are the careful use of constitutional provisions and manipulation of party finance.

11 CFR 109.37 - What is a “party coordinated communication”?

Science.gov (United States)

2010-01-01

... Provisions for Political Party Committees § 109.37 What is a “party coordinated communication”? (a) Definition. A political party communication is coordinated with a candidate, a candidate's authorized... paragraphs (a)(1), (a)(2), and (a)(3) of this section. (1) The communication is paid for by a political party...

Model-Based Engineering and Manufacturing CAD/CAM Benchmark.; FINAL

International Nuclear Information System (INIS)

Domm, T.C.; Underwood, R.S.

1999-01-01

The Benchmark Project was created from a desire to identify best practices and improve the overall efficiency and performance of the Y-12 Plant's systems and personnel supporting the manufacturing mission. The mission of the benchmark team was to search out industry leaders in manufacturing and evaluate their engineering practices and processes to determine direction and focus for Y-12 modernization efforts. The companies visited included several large established companies and a new, small, high-tech machining firm. As a result of this effort, changes are recommended that will enable Y-12 to become a more modern, responsive, cost-effective manufacturing facility capable of supporting the needs of the Nuclear Weapons Complex (NWC) into the 21st century. The benchmark team identified key areas of interest, both focused and general. The focus areas included Human Resources, Information Management, Manufacturing Software Tools, and Standards/Policies and Practices. Areas of general interest included Infrastructure, Computer Platforms and Networking, and Organizational Structure. The results of this benchmark showed that all companies are moving in the direction of model-based engineering and manufacturing. There was evidence that many companies are trying to grasp how to manage current and legacy data. In terms of engineering design software tools, the companies contacted were somewhere between 3-D solid modeling and surfaced wire-frame models. The manufacturing computer tools were varied, with most companies using more than one software product to generate machining data and none currently performing model-based manufacturing (MBM) from a common model. The majority of companies were closer to identifying or using a single computer-aided design (CAD) system than a single computer-aided manufacturing (CAM) system. The Internet was a technology that all companies were looking to either transport information more easily throughout the corporation or as a conduit for

Numerical methods: Analytical benchmarking in transport theory

International Nuclear Information System (INIS)

Ganapol, B.D.

1988-01-01

Numerical methods applied to reactor technology have reached a high degree of maturity. Certainly one- and two-dimensional neutron transport calculations have become routine, with several programs available on personal computer and the most widely used programs adapted to workstation and minicomputer computational environments. With the introduction of massive parallelism and as experience with multitasking increases, even more improvement in the development of transport algorithms can be expected. Benchmarking an algorithm is usually not a very pleasant experience for the code developer. Proper algorithmic verification by benchmarking involves the following considerations: (1) conservation of particles, (2) confirmation of intuitive physical behavior, and (3) reproduction of analytical benchmark results. By using today's computational advantages, new basic numerical methods have been developed that allow a wider class of benchmark problems to be considered

Benchmarking and validation activities within JEFF project

Directory of Open Access Journals (Sweden)

Cabellos O.

2017-01-01

Full Text Available The challenge for any nuclear data evaluation project is to periodically release a revised, fully consistent and complete library, with all needed data and covariances, and ensure that it is robust and reliable for a variety of applications. Within an evaluation effort, benchmarking activities play an important role in validating proposed libraries. The Joint Evaluated Fission and Fusion (JEFF Project aims to provide such a nuclear data library, and thus, requires a coherent and efficient benchmarking process. The aim of this paper is to present the activities carried out by the new JEFF Benchmarking and Validation Working Group, and to describe the role of the NEA Data Bank in this context. The paper will also review the status of preliminary benchmarking for the next JEFF-3.3 candidate cross-section files.

Benchmarking and validation activities within JEFF project

Science.gov (United States)

Cabellos, O.; Alvarez-Velarde, F.; Angelone, M.; Diez, C. J.; Dyrda, J.; Fiorito, L.; Fischer, U.; Fleming, M.; Haeck, W.; Hill, I.; Ichou, R.; Kim, D. H.; Klix, A.; Kodeli, I.; Leconte, P.; Michel-Sendis, F.; Nunnenmann, E.; Pecchia, M.; Peneliau, Y.; Plompen, A.; Rochman, D.; Romojaro, P.; Stankovskiy, A.; Sublet, J. Ch.; Tamagno, P.; Marck, S. van der

2017-09-01

The challenge for any nuclear data evaluation project is to periodically release a revised, fully consistent and complete library, with all needed data and covariances, and ensure that it is robust and reliable for a variety of applications. Within an evaluation effort, benchmarking activities play an important role in validating proposed libraries. The Joint Evaluated Fission and Fusion (JEFF) Project aims to provide such a nuclear data library, and thus, requires a coherent and efficient benchmarking process. The aim of this paper is to present the activities carried out by the new JEFF Benchmarking and Validation Working Group, and to describe the role of the NEA Data Bank in this context. The paper will also review the status of preliminary benchmarking for the next JEFF-3.3 candidate cross-section files.

25 CFR 11.906 - Rights of parties.

Science.gov (United States)

2010-04-01

... ORDER CODE Children's Court § 11.906 Rights of parties. (a) In all hearings and proceedings under §§ 11.900-11.1114 of this part the following rights will be observed unless modified by the particular... 25 Indians 1 2010-04-01 2010-04-01 false Rights of parties. 11.906 Section 11.906 Indians BUREAU...

Device-independent two-party cryptography secure against sequential attacks

DEFF Research Database (Denmark)

Kaniewski, Jedrzej; Wehner, Stephanie

2016-01-01

The goal of two-party cryptography is to enable two parties, Alice and Bob, to solve common tasks without the need for mutual trust. Examples of such tasks are private access to a database, and secure identification. Quantum communication enables security for all of these problems in the noisy......-storage model by sending more signals than the adversary can store in a certain time frame. Here, we initiate the study of device-independent (DI) protocols for two-party cryptography in the noisy-storage model. Specifically, we present a relatively easy to implement protocol for a cryptographic building block...... known as weak string erasure and prove its security even if the devices used in the protocol are prepared by the dishonest party. DI two-party cryptography is made challenging by the fact that Alice and Bob do not trust each other, which requires new techniques to establish security. We fully analyse...

A rod-airfoil experiment as a benchmark for broadband noise modeling

Energy Technology Data Exchange (ETDEWEB)

Jacob, M.C. [Ecole Centrale de Lyon, Laboratoire de Mecanique des Fluides et d' Acoustique, Ecully Cedex (France); Universite Claude Bernard/Lyon I, Villeurbanne Cedex (France); Boudet, J.; Michard, M. [Ecole Centrale de Lyon, Laboratoire de Mecanique des Fluides et d' Acoustique, Ecully Cedex (France); Casalino, D. [Ecole Centrale de Lyon, Laboratoire de Mecanique des Fluides et d' Acoustique, Ecully Cedex (France); Fluorem SAS, Ecully Cedex (France)

2005-07-01

A low Mach number rod-airfoil experiment is shown to be a good benchmark for numerical and theoretical broadband noise modeling. The benchmarking approach is applied to a sound computation from a 2D unsteady-Reynolds-averaged Navier-Stokes (U-RANS) flow field, where 3D effects are partially compensated for by a spanwise statistical model and by a 3D large eddy simulation. The experiment was conducted in the large anechoic wind tunnel of the Ecole Centrale de Lyon. Measurements taken included particle image velocity (PIV) around the airfoil, single hot wire, wall pressure coherence, and far field pressure. These measurements highlight the strong 3D effects responsible for spectral broadening around the rod vortex shedding frequency in the subcritical regime, and the dominance of the noise generated around the airfoil leading edge. The benchmarking approach is illustrated by two examples: the validation of a stochastical noise generation model applied to a 2D U-RANS computation; the assessment of a 3D LES computation using a new subgrid scale (SGS) model coupled to an advanced-time Ffowcs-Williams and Hawkings sound computation. (orig.)

The 2014 Elections and the Brazilian Party System

Directory of Open Access Journals (Sweden)

Carlos Ranulfo Melo

2015-04-01

Full Text Available The Brazilian party system presents a paradox. Although the Workers Party (PT and the Brazilian Social Democratic Party (PSDB have controlled presidential elections for the last 20 years, their force at the other levels of electoral competition has not grown. The objective of this study is to undertake a discussion of this situation through the 2014 general elections. After attempting to explain why successive challengers have not been able to change the structure of competition for the Brazilian presidency, I will analyze the relation established between the pattern observed at this level and the other “connected” electoral disputes—both those for state executive and federal legislative office. The general conclusion is that even if the pattern continues, it is quite improbable that this will significantly impact the other levels of national political party competition.

Benchmarking

OpenAIRE

Beretta Sergio; Dossi Andrea; Grove Hugh

2000-01-01

Due to their particular nature, the benchmarking methodologies tend to exceed the boundaries of management techniques, and to enter the territories of managerial culture. A culture that is also destined to break into the accounting area not only strongly supporting the possibility of fixing targets, and measuring and comparing the performance (an aspect that is already innovative and that is worthy of attention), but also questioning one of the principles (or taboos) of the accounting or...

Benchmarking in Identifying Priority Directions of Development of Telecommunication Operators

Directory of Open Access Journals (Sweden)

Zaharchenko Lolita A.

2013-12-01

Full Text Available The article analyses evolution of development and possibilities of application of benchmarking in the telecommunication sphere. It studies essence of benchmarking on the basis of generalisation of approaches of different scientists to definition of this notion. In order to improve activity of telecommunication operators, the article identifies the benchmarking technology and main factors, that determine success of the operator in the modern market economy, and the mechanism of benchmarking and component stages of carrying out benchmarking by a telecommunication operator. It analyses the telecommunication market and identifies dynamics of its development and tendencies of change of the composition of telecommunication operators and providers. Having generalised the existing experience of benchmarking application, the article identifies main types of benchmarking of telecommunication operators by the following features: by the level of conduct of (branch, inter-branch and international benchmarking; by relation to participation in the conduct (competitive and joint; and with respect to the enterprise environment (internal and external.

Third Party Liability governing Dangerous and Nuclear Activities

International Nuclear Information System (INIS)

Di Martino, Vittorio.

1979-01-01

The introductory chapters of this book analyse the concept of fault as a basis for third party liability and the evolution of jurisprudence and doctrine towards the concept of absolute liability. The following part covers the Italian system of liability for hazardous activities. The nuclear third party liability system is then analysed according to existing international conventions and nuclear legislation in several countries. The Appendix contains various legislative and regulatory texts on nuclear third party liability in Italy and in other countries which provide for special legislation in this field. (NEA) [fr

Inequality and anti-globalization backlash by political parties

NARCIS (Netherlands)

Burgoon, B.

2013-01-01

Does income inequality increase political backlash against European and global integration? This paper reports research suggesting that it can. The article analyses party opposition to and support for trade openness, European Union integration and general internationalism of political party

Role of political parties in the formation of civil society in Uzbekistan

Directory of Open Access Journals (Sweden)

Сирожжон Насипкулович Бердикулов

2015-06-01

Full Text Available The article considers the role of political parties in the development of civil society and the rule of law, as well as issues of political parties differ from other public organizations, the concept of a multi-party system, the importance of a multi-party system in ensuring political pluralism, inter-party competition, constructive opposition, the expression of the interests of the electorate, the space of political parties in parliament and local councils (soviets

Three-dimensional RAMA fluence methodology benchmarking

International Nuclear Information System (INIS)

Baker, S. P.; Carter, R. G.; Watkins, K. E.; Jones, D. B.

2004-01-01

This paper describes the benchmarking of the RAMA Fluence Methodology software, that has been performed in accordance with U. S. Nuclear Regulatory Commission Regulatory Guide 1.190. The RAMA Fluence Methodology has been developed by TransWare Enterprises Inc. through funding provided by the Electric Power Research Inst., Inc. (EPRI) and the Boiling Water Reactor Vessel and Internals Project (BWRVIP). The purpose of the software is to provide an accurate method for calculating neutron fluence in BWR pressure vessels and internal components. The Methodology incorporates a three-dimensional deterministic transport solution with flexible arbitrary geometry representation of reactor system components, previously available only with Monte Carlo solution techniques. Benchmarking was performed on measurements obtained from three standard benchmark problems which include the Pool Criticality Assembly (PCA), VENUS-3, and H. B. Robinson Unit 2 benchmarks, and on flux wire measurements obtained from two BWR nuclear plants. The calculated to measured (C/M) ratios range from 0.93 to 1.04 demonstrating the accuracy of the RAMA Fluence Methodology in predicting neutron flux, fluence, and dosimetry activation. (authors)

Handbook of critical experiments benchmarks

International Nuclear Information System (INIS)

Durst, B.M.; Bierman, S.R.; Clayton, E.D.

1978-03-01

Data from critical experiments have been collected together for use as benchmarks in evaluating calculational techniques and nuclear data. These benchmarks have been selected from the numerous experiments performed on homogeneous plutonium systems. No attempt has been made to reproduce all of the data that exists. The primary objective in the collection of these data is to present representative experimental data defined in a concise, standardized format that can easily be translated into computer code input

Activity report of working party on reactor physics of subcritical system. October 2001 to March 2003

International Nuclear Information System (INIS)

2004-03-01

Under the Research Committee on Reactor Physics, the Working Party on Reactor Physics of Subcritical System (ADS-WP) was set in July 2001 to research reactor physics of subcritical system such as Accelerator-Driven System (ADS). The WP, at the first meeting, discussed a guideline of its activity for two years and decided to perform theoretical research for the following subjects: (1) study of reactor physics for a subcritical core, (2) benchmark problems for a subcritical core and their calculations, (3) study of physical parameters affecting to set subcriticality of ADS, and (4) study of measurement and surveillance methods of subcriticality of a subcritical core. The activity of ADS-WP continued up to March 2003. In this duration, the members of the WP met together eight times, including four meetings jointly held with the Workshop on Accelerator-Driven Subcritical Reactor at Kyoto University Research Reactor Institute. This report summarizes the result obtained by the above WP activity and research. (author)

Benchmarking computer platforms for lattice QCD applications

International Nuclear Information System (INIS)

Hasenbusch, M.; Jansen, K.; Pleiter, D.; Stueben, H.; Wegner, P.; Wettig, T.; Wittig, H.

2004-01-01

We define a benchmark suite for lattice QCD and report on benchmark results from several computer platforms. The platforms considered are apeNEXT, CRAY T3E; Hitachi SR8000, IBM p690, PC-Clusters, and QCDOC

Separate issues of rights and obligations of loan agreement parties

Directory of Open Access Journals (Sweden)

О. В. Ночовкіна

2015-05-01

Paper main body. Peculiarities of rights and duties of loan agreement parties mainly connected to gratuitous nature of such relations. The scope and content of rights and duties of the counterparts according to the agreement depends upon its legal structure (real or consensus. At characterization of the loan agreement parties’ duties we should address as to the regulations of Chapter 60 of Ukrainian Civil Law and to the regulations governing hire (rent relations. The Clauses of Chapter 58 of Ukrainian Civil Law shall be applied only if the opposite not determined by Chapter “Loan” and does not contradict gratuitous nature of loan relations. The main responsibility of the loaner according to the agreement is the transfer of piece of property to a user for gratuitous usage. At real transaction the loaner performs this function at the moment of agreement conclusion. At consensus model of transaction the duty of the loaner to transfer piece of property arise first of all.Conclusions. In order to improve legal regulation of certain duties of loan agreement parties we should: 1 in legal regulations to determine such terms as “ordinary costs”, “capital repairs” and “minor repairs”; 2 we should clearly indicate which regulations of Clause 58 “Hire(rent” can be applied to govern the loan agreement. Such improvement will allow to eliminate any disputes at allocation of rights and duties of the parties during insurance of loaned property, at repair of property and reimbursement of repair expenses.

H.B. Robinson-2 pressure vessel benchmark

Energy Technology Data Exchange (ETDEWEB)

Remec, I.; Kam, F.B.K.

1998-02-01

The H. B. Robinson Unit 2 Pressure Vessel Benchmark (HBR-2 benchmark) is described and analyzed in this report. Analysis of the HBR-2 benchmark can be used as partial fulfillment of the requirements for the qualification of the methodology for calculating neutron fluence in pressure vessels, as required by the U.S. Nuclear Regulatory Commission Regulatory Guide DG-1053, Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron Fluence. Section 1 of this report describes the HBR-2 benchmark and provides all the dimensions, material compositions, and neutron source data necessary for the analysis. The measured quantities, to be compared with the calculated values, are the specific activities at the end of fuel cycle 9. The characteristic feature of the HBR-2 benchmark is that it provides measurements on both sides of the pressure vessel: in the surveillance capsule attached to the thermal shield and in the reactor cavity. In section 2, the analysis of the HBR-2 benchmark is described. Calculations with the computer code DORT, based on the discrete-ordinates method, were performed with three multigroup libraries based on ENDF/B-VI: BUGLE-93, SAILOR-95 and BUGLE-96. The average ratio of the calculated-to-measured specific activities (C/M) for the six dosimeters in the surveillance capsule was 0.90 {+-} 0.04 for all three libraries. The average C/Ms for the cavity dosimeters (without neptunium dosimeter) were 0.89 {+-} 0.10, 0.91 {+-} 0.10, and 0.90 {+-} 0.09 for the BUGLE-93, SAILOR-95 and BUGLE-96 libraries, respectively. It is expected that the agreement of the calculations with the measurements, similar to the agreement obtained in this research, should typically be observed when the discrete-ordinates method and ENDF/B-VI libraries are used for the HBR-2 benchmark analysis.

Évolution des partis politiques dans le monde arabe | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Orient et en Afrique du Nord subir diverses mutations. Le soutien dont bénéficiaient les partis nationalistes a diminué au profit des partis islamistes. Ce sont ces derniers qui sont désormais les plus dynamiques et les plus contestataires des partis ...

Pool critical assembly pressure vessel facility benchmark

International Nuclear Information System (INIS)

Remec, I.; Kam, F.B.K.

1997-07-01

This pool critical assembly (PCA) pressure vessel wall facility benchmark (PCA benchmark) is described and analyzed in this report. Analysis of the PCA benchmark can be used for partial fulfillment of the requirements for the qualification of the methodology for pressure vessel neutron fluence calculations, as required by the US Nuclear Regulatory Commission regulatory guide DG-1053. Section 1 of this report describes the PCA benchmark and provides all data necessary for the benchmark analysis. The measured quantities, to be compared with the calculated values, are the equivalent fission fluxes. In Section 2 the analysis of the PCA benchmark is described. Calculations with the computer code DORT, based on the discrete-ordinates method, were performed for three ENDF/B-VI-based multigroup libraries: BUGLE-93, SAILOR-95, and BUGLE-96. An excellent agreement of the calculated (C) and measures (M) equivalent fission fluxes was obtained. The arithmetic average C/M for all the dosimeters (total of 31) was 0.93 ± 0.03 and 0.92 ± 0.03 for the SAILOR-95 and BUGLE-96 libraries, respectively. The average C/M ratio, obtained with the BUGLE-93 library, for the 28 measurements was 0.93 ± 0.03 (the neptunium measurements in the water and air regions were overpredicted and excluded from the average). No systematic decrease in the C/M ratios with increasing distance from the core was observed for any of the libraries used

Benchmarking computer platforms for lattice QCD applications

International Nuclear Information System (INIS)

Hasenbusch, M.; Jansen, K.; Pleiter, D.; Wegner, P.; Wettig, T.

2003-09-01

We define a benchmark suite for lattice QCD and report on benchmark results from several computer platforms. The platforms considered are apeNEXT, CRAY T3E, Hitachi SR8000, IBM p690, PC-Clusters, and QCDOC. (orig.)

A simplified 2D HTTR benchmark problem

International Nuclear Information System (INIS)

Zhang, Z.; Rahnema, F.; Pounders, J. M.; Zhang, D.; Ougouag, A.

2009-01-01

To access the accuracy of diffusion or transport methods for reactor calculations, it is desirable to create heterogeneous benchmark problems that are typical of relevant whole core configurations. In this paper we have created a numerical benchmark problem in 2D configuration typical of a high temperature gas cooled prismatic core. This problem was derived from the HTTR start-up experiment. For code-to-code verification, complex details of geometry and material specification of the physical experiments are not necessary. To this end, the benchmark problem presented here is derived by simplifications that remove the unnecessary details while retaining the heterogeneity and major physics properties from the neutronics viewpoint. Also included here is a six-group material (macroscopic) cross section library for the benchmark problem. This library was generated using the lattice depletion code HELIOS. Using this library, benchmark quality Monte Carlo solutions are provided for three different configurations (all-rods-in, partially-controlled and all-rods-out). The reference solutions include the core eigenvalue, block (assembly) averaged fuel pin fission density distributions, and absorption rate in absorbers (burnable poison and control rods). (authors)

Regression Benchmarking: An Approach to Quality Assurance in Performance

OpenAIRE

Bulej, Lubomír

2005-01-01

The paper presents a short summary of our work in the area of regression benchmarking and its application to software development. Specially, we explain the concept of regression benchmarking, the requirements for employing regression testing in a software project, and methods used for analyzing the vast amounts of data resulting from repeated benchmarking. We present the application of regression benchmarking on a real software project and conclude with a glimpse at the challenges for the fu...

Second benchmark problem for WIPP structural computations

International Nuclear Information System (INIS)

Krieg, R.D.; Morgan, H.S.; Hunter, T.O.

1980-12-01

This report describes the second benchmark problem for comparison of the structural codes used in the WIPP project. The first benchmark problem consisted of heated and unheated drifts at a depth of 790 m, whereas this problem considers a shallower level (650 m) more typical of the repository horizon. But more important, the first problem considered a homogeneous salt configuration, whereas this problem considers a configuration with 27 distinct geologic layers, including 10 clay layers - 4 of which are to be modeled as possible slip planes. The inclusion of layering introduces complications in structural and thermal calculations that were not present in the first benchmark problem. These additional complications will be handled differently by the various codes used to compute drift closure rates. This second benchmark problem will assess these codes by evaluating the treatment of these complications

Inequality and anti-globalization backlash by political parties

NARCIS (Netherlands)

Burgoon, B.

2011-01-01

Does inequality fuel anti-globalization backlash? This paper answers this question by analyzing how income inequality affects the embrace or eschew of globalization by political parties. It focuses on party opposition to and support for trade openness, European-Union integration, and general

Creating A Nationwide Nonpartisan Initiative for Family Caregivers in Political Party Platforms.

Science.gov (United States)

Scribner, Ben; Lynn, Joanne; Walker, Victoria; Morgan, Les; Montgomery, Anne; Blair, Elizabeth; Baird, Davis; Goldschmidt, Barbara; Kirschenbaum, Naomi

2017-06-01

Policymakers have been slow to support family caregivers, and political agendas mostly fail to address the cost burdens, impact on employment and productivity, and other challenges in taking on long-term care tasks. This project set out to raise policymakers' awareness of family caregivers through proposals to Republican and Democratic party platforms during the 2016 political season. The Family Caregiver Platform Project (FCPP) reviewed the state party platform submission process for Democratic and Republican parties in all 50 states and the District of Columbia. We built a website to make each process understandable by caregiver advocates. We designed model submissions to help volunteers tailor a proposal and recruited caregiver advocates participating in their state process. Finally, we mobilized a ground operation in many states and followed the progress of submissions in each state, as well as the formation of the national platforms. In 39 states, at least one party, Republican or Democrat, hosted a state party platform process. As of September 2016 FCPP volunteers submitted proposals to 29 state parties in 22 states. Family caregiver language was added to eight state party platforms, one state party resolution, two bipartisan legislative resolutions, and one national party platform. The FCPP generated a non-partisan grassroots effort to educate and motivate policymakers to address caregiving issues and solutions. Democratic party leaders provided more opportunities to connect with political leaders, with seven Democratic parties and one Republican party, addressing family caregiver issues in their party platforms. © 2017, Copyright the Authors Journal compilation © 2017, The American Geriatrics Society.

Benchmarks: The Development of a New Approach to Student Evaluation.

Science.gov (United States)

Larter, Sylvia

The Toronto Board of Education Benchmarks are libraries of reference materials that demonstrate student achievement at various levels. Each library contains video benchmarks, print benchmarks, a staff handbook, and summary and introductory documents. This book is about the development and the history of the benchmark program. It has taken over 3…

Aerodynamic benchmarking of the DeepWind design

DEFF Research Database (Denmark)

Bedon, Gabriele; Schmidt Paulsen, Uwe; Aagaard Madsen, Helge

The aerodynamic benchmarking for the DeepWind rotor is conducted comparing different rotor geometries and solutions and keeping the comparison as fair as possible. The objective for the benchmarking is to find the most suitable configuration in order to maximize the power production and minimize...... the blade solicitation and the cost of energy. Different parameters are considered for the benchmarking study. The DeepWind blade is characterized by a shape similar to the Troposkien geometry but asymmetric between the top and bottom parts. The blade shape is considered as a fixed parameter...

Integral benchmarks with reference to thorium fuel cycle

International Nuclear Information System (INIS)

Ganesan, S.

2003-01-01

This is a power point presentation about the Indian participation in the CRP 'Evaluated Data for the Thorium-Uranium fuel cycle'. The plans and scope of the Indian participation are to provide selected integral experimental benchmarks for nuclear data validation, including Indian Thorium burn up benchmarks, post-irradiation examination studies, comparison of basic evaluated data files and analysis of selected benchmarks for Th-U fuel cycle

Political Parties and Popular Representation in Myanmar’s Democratisation Process

Directory of Open Access Journals (Sweden)

Kristian Stokke

2015-01-01

Full Text Available The article examines the role of political parties in Myanmar’s democratisation process. We argue that the substance of democratisation depends on popular representation through political parties but question their capacity to provide such representation. Examining capacity through the concept of party institutionalisation, we find that most parties have not been able to build effective organisational structures. However, we also find a degree of party institutionalisation in the form of rootedness in society. Political cleavages between those favouring authoritarian rule over democratic rule and Burman nationhood over ethnic notions of nationhood have produced divisions between state-centred parties associated with Myanmar’s authoritarian legacy and society-centred pro-democracy and ethnic parties. Although being less dichotomous than in the past, we argue that these cleavages continue to provide a basis for party identity and rootedness in society. We conclude that further development of political parties and popular representation will be shaped by the relations between parties, the state, and society – where individual parties are shaped according to their tendencies towards state-centred cartel parties or society-centred mass parties.

Energy-political ideas of environmentalist parties in Western Europe

International Nuclear Information System (INIS)

Hrbek, R.

1990-01-01

By and large the green-alternative parties embrace the same energy policies: They reject nuclear energy, they demand a radically new approach to energy politics and they want to realise their programmes within a comprehensive restructuring of the political and economic order of the respective states. The reasons for this categorical NO to nuclear energy seen in its social and environmental compatibility. In the following we will explain how this type of party works and functions. The reasons for the formation of these parties and the profile of green-alternative parties on a national and international level are described in detail as well as the resonance in society and their chances of success in general. (orig./HSCH) [de

Benchmark Evaluation of HTR-PROTEUS Pebble Bed Experimental Program

International Nuclear Information System (INIS)

Bess, John D.; Montierth, Leland; Köberl, Oliver

2014-01-01

Benchmark models were developed to evaluate 11 critical core configurations of the HTR-PROTEUS pebble bed experimental program. Various additional reactor physics measurements were performed as part of this program; currently only a total of 37 absorber rod worth measurements have been evaluated as acceptable benchmark experiments for Cores 4, 9, and 10. Dominant uncertainties in the experimental keff for all core configurations come from uncertainties in the 235 U enrichment of the fuel, impurities in the moderator pebbles, and the density and impurity content of the radial reflector. Calculations of k eff with MCNP5 and ENDF/B-VII.0 neutron nuclear data are greater than the benchmark values but within 1% and also within the 3σ uncertainty, except for Core 4, which is the only randomly packed pebble configuration. Repeated calculations of k eff with MCNP6.1 and ENDF/B-VII.1 are lower than the benchmark values and within 1% (~3σ) except for Cores 5 and 9, which calculate lower than the benchmark eigenvalues within 4σ. The primary difference between the two nuclear data libraries is the adjustment of the absorption cross section of graphite. Simulations of the absorber rod worth measurements are within 3σ of the benchmark experiment values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments

29 CFR 1425.6 - Use of third-party mediation assistance.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Use of third-party mediation assistance. 1425.6 Section 1425.6 Labor Regulations Relating to Labor (Continued) FEDERAL MEDIATION AND CONCILIATION SERVICE MEDIATION ASSISTANCE IN THE FEDERAL SERVICE § 1425.6 Use of third-party mediation assistance. If the parties...

The extent of benchmarking in the South African financial sector

Directory of Open Access Journals (Sweden)

W Vermeulen

2014-06-01

Full Text Available Benchmarking is the process of identifying, understanding and adapting outstanding practices from within the organisation or from other businesses, to help improve performance. The importance of benchmarking as an enabler of business excellence has necessitated an in-depth investigation into the current state of benchmarking in South Africa. This research project highlights the fact that respondents realise the importance of benchmarking, but that various problems hinder the effective implementation of benchmarking. Based on the research findings, recommendations for achieving success are suggested.

Two-party secret key distribution via a modified quantum secret sharing protocol.

Science.gov (United States)

Grice, W P; Evans, P G; Lawrie, B; Legré, M; Lougovski, P; Ray, W; Williams, B P; Qi, B; Smith, A M

2015-03-23

We present and demonstrate a novel protocol for distributing secret keys between two and only two parties based on N-party single-qubit Quantum Secret Sharing (QSS). We demonstrate our new protocol with N = 3 parties using phase-encoded photons. We show that any two out of N parties can build a secret key based on partial information from each other and with collaboration from the remaining N - 2 parties. Our implementation allows for an accessible transition between N-party QSS and arbitrary two party QKD without modification of hardware. In addition, our approach significantly reduces the number of resources such as single photon detectors, lasers and dark fiber connections needed to implement QKD.

Effects and outcomes of third-party reproduction: parents.

Science.gov (United States)

Greenfeld, Dorothy A

2015-09-01

Third-party reproduction has introduced a host of changing family constellations. Research has shown that children conceived through third-party reproduction are doing well psychologically and developmentally, but what about their parents? How have they coped with the transition to third-party reproduction? Has the experience impacted their marital stability or the quality of their parenting? This review will address parents of children conceived through oocyte donation, parents of children conceived through gestational surrogacy, and gay male parents of children conceived through oocyte donation and gestational surrogacy. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Clean Energy Manufacturing Analysis Center Benchmark Report: Framework and Methodologies

Energy Technology Data Exchange (ETDEWEB)

Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engel-Cox, Jill [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-05-23

This report documents the CEMAC methodologies for developing and reporting annual global clean energy manufacturing benchmarks. The report reviews previously published manufacturing benchmark reports and foundational data, establishes a framework for benchmarking clean energy technologies, describes the CEMAC benchmark analysis methodologies, and describes the application of the methodologies to the manufacturing of four specific clean energy technologies.

The level 1 and 2 specification for parallel benchmark and a benchmark test of scalar-parallel computer SP2 based on the specifications

International Nuclear Information System (INIS)

Orii, Shigeo

1998-06-01

A benchmark specification for performance evaluation of parallel computers for numerical analysis is proposed. Level 1 benchmark, which is a conventional type benchmark using processing time, measures performance of computers running a code. Level 2 benchmark proposed in this report is to give the reason of the performance. As an example, scalar-parallel computer SP2 is evaluated with this benchmark specification in case of a molecular dynamics code. As a result, the main causes to suppress the parallel performance are maximum band width and start-up time of communication between nodes. Especially the start-up time is proportional not only to the number of processors but also to the number of particles. (author)

Benchmarking to improve the quality of cystic fibrosis care.

Science.gov (United States)

Schechter, Michael S

2012-11-01

Benchmarking involves the ascertainment of healthcare programs with most favorable outcomes as a means to identify and spread effective strategies for delivery of care. The recent interest in the development of patient registries for patients with cystic fibrosis (CF) has been fueled in part by an interest in using them to facilitate benchmarking. This review summarizes reports of how benchmarking has been operationalized in attempts to improve CF care. Although certain goals of benchmarking can be accomplished with an exclusive focus on registry data analysis, benchmarking programs in Germany and the United States have supplemented these data analyses with exploratory interactions and discussions to better understand successful approaches to care and encourage their spread throughout the care network. Benchmarking allows the discovery and facilitates the spread of effective approaches to care. It provides a pragmatic alternative to traditional research methods such as randomized controlled trials, providing insights into methods that optimize delivery of care and allowing judgments about the relative effectiveness of different therapeutic approaches.

Benchmarking and Regulation

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

. The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Political Party Financing and why it Matters in Tanzania | Walwa ...

African Journals Online (AJOL)

Among the key recommendations is that public funding for ongoing party activities and campaigns should be allocated by a mix of proportional rules and flat subsidies to all parties that meet reasonable thresholds and flat subsidies as refers here imply providing subsidies to all political parties on equal basis. The other key ...

Energy saving in WWTP: Daily benchmarking under uncertainty and data availability limitations.

Science.gov (United States)

Torregrossa, D; Schutz, G; Cornelissen, A; Hernández-Sancho, F; Hansen, J

2016-07-01

Efficient management of Waste Water Treatment Plants (WWTPs) can produce significant environmental and economic benefits. Energy benchmarking can be used to compare WWTPs, identify targets and use these to improve their performance. Different authors have performed benchmark analysis on monthly or yearly basis but their approaches suffer from a time lag between an event, its detection, interpretation and potential actions. The availability of on-line measurement data on many WWTPs should theoretically enable the decrease of the management response time by daily benchmarking. Unfortunately this approach is often impossible because of limited data availability. This paper proposes a methodology to perform a daily benchmark analysis under database limitations. The methodology has been applied to the Energy Online System (EOS) developed in the framework of the project "INNERS" (INNovative Energy Recovery Strategies in the urban water cycle). EOS calculates a set of Key Performance Indicators (KPIs) for the evaluation of energy and process performances. In EOS, the energy KPIs take in consideration the pollutant load in order to enable the comparison between different plants. For example, EOS does not analyse the energy consumption but the energy consumption on pollutant load. This approach enables the comparison of performances for plants with different loads or for a single plant under different load conditions. The energy consumption is measured by on-line sensors, while the pollutant load is measured in the laboratory approximately every 14 days. Consequently, the unavailability of the water quality parameters is the limiting factor in calculating energy KPIs. In this paper, in order to overcome this limitation, the authors have developed a methodology to estimate the required parameters and manage the uncertainty in the estimation. By coupling the parameter estimation with an interval based benchmark approach, the authors propose an effective, fast and reproducible

Benchmarking multi-dimensional large strain consolidation analyses

International Nuclear Information System (INIS)

Priestley, D.; Fredlund, M.D.; Van Zyl, D.

2010-01-01

Analyzing the consolidation of tailings slurries and dredged fills requires a more extensive formulation than is used for common (small strain) consolidation problems. Large strain consolidation theories have traditionally been limited to 1-D formulations. SoilVision Systems has developed the capacity to analyze large strain consolidation problems in 2 and 3-D. The benchmarking of such formulations is not a trivial task. This paper presents several examples of modeling large strain consolidation in the beta versions of the new software. These examples were taken from the literature and were used to benchmark the large strain formulation used by the new software. The benchmarks reported here are: a comparison to the consolidation software application CONDES0, Townsend's Scenario B and a multi-dimensional analysis of long-term column tests performed on oil sands tailings. All three of these benchmarks were attained using the SVOffice suite. (author)

JENDL-4.0 benchmarking for fission reactor applications

International Nuclear Information System (INIS)

Chiba, Go; Okumura, Keisuke; Sugino, Kazuteru; Nagaya, Yasunobu; Yokoyama, Kenji; Kugo, Teruhiko; Ishikawa, Makoto; Okajima, Shigeaki

2011-01-01

Benchmark testing for the newly developed Japanese evaluated nuclear data library JENDL-4.0 is carried out by using a huge amount of integral data. Benchmark calculations are performed with a continuous-energy Monte Carlo code and with the deterministic procedure, which has been developed for fast reactor analyses in Japan. Through the present benchmark testing using a wide range of benchmark data, significant improvement in the performance of JENDL-4.0 for fission reactor applications is clearly demonstrated in comparison with the former library JENDL-3.3. Much more accurate and reliable prediction for neutronic parameters for both thermal and fast reactors becomes possible by using the library JENDL-4.0. (author)

Is the assumption of normality or log-normality for continuous response data critical for benchmark dose estimation?

International Nuclear Information System (INIS)

Shao, Kan; Gift, Jeffrey S.; Setzer, R. Woodrow

2013-01-01

Continuous responses (e.g. body weight) are widely used in risk assessment for determining the benchmark dose (BMD) which is used to derive a U.S. EPA reference dose. One critical question that is not often addressed in dose–response assessments is whether to model the continuous data as normally or log-normally distributed. Additionally, if lognormality is assumed, and only summarized response data (i.e., mean ± standard deviation) are available as is usual in the peer-reviewed literature, the BMD can only be approximated. In this study, using the “hybrid” method and relative deviation approach, we first evaluate six representative continuous dose–response datasets reporting individual animal responses to investigate the impact on BMD/BMDL estimates of (1) the distribution assumption and (2) the use of summarized versus individual animal data when a log-normal distribution is assumed. We also conduct simulation studies evaluating model fits to various known distributions to investigate whether the distribution assumption has influence on BMD/BMDL estimates. Our results indicate that BMDs estimated using the hybrid method are more sensitive to the distribution assumption than counterpart BMDs estimated using the relative deviation approach. The choice of distribution assumption has limited impact on the BMD/BMDL estimates when the within dose-group variance is small, while the lognormality assumption is a better choice for relative deviation method when data are more skewed because of its appropriateness in describing the relationship between mean and standard deviation. Additionally, the results suggest that the use of summarized data versus individual response data to characterize log-normal distributions has minimal impact on BMD estimates. - Highlights: • We investigate to what extent the distribution assumption can affect BMD estimates. • Both real data analysis and simulation study are conducted. • BMDs estimated using hybrid method are more

Is the assumption of normality or log-normality for continuous response data critical for benchmark dose estimation?

Energy Technology Data Exchange (ETDEWEB)

Shao, Kan, E-mail: Shao.Kan@epa.gov [ORISE Postdoctoral Fellow, National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Gift, Jeffrey S. [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Setzer, R. Woodrow [National Center for Computational Toxicology, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States)

2013-11-01

Continuous responses (e.g. body weight) are widely used in risk assessment for determining the benchmark dose (BMD) which is used to derive a U.S. EPA reference dose. One critical question that is not often addressed in dose–response assessments is whether to model the continuous data as normally or log-normally distributed. Additionally, if lognormality is assumed, and only summarized response data (i.e., mean ± standard deviation) are available as is usual in the peer-reviewed literature, the BMD can only be approximated. In this study, using the “hybrid” method and relative deviation approach, we first evaluate six representative continuous dose–response datasets reporting individual animal responses to investigate the impact on BMD/BMDL estimates of (1) the distribution assumption and (2) the use of summarized versus individual animal data when a log-normal distribution is assumed. We also conduct simulation studies evaluating model fits to various known distributions to investigate whether the distribution assumption has influence on BMD/BMDL estimates. Our results indicate that BMDs estimated using the hybrid method are more sensitive to the distribution assumption than counterpart BMDs estimated using the relative deviation approach. The choice of distribution assumption has limited impact on the BMD/BMDL estimates when the within dose-group variance is small, while the lognormality assumption is a better choice for relative deviation method when data are more skewed because of its appropriateness in describing the relationship between mean and standard deviation. Additionally, the results suggest that the use of summarized data versus individual response data to characterize log-normal distributions has minimal impact on BMD estimates. - Highlights: • We investigate to what extent the distribution assumption can affect BMD estimates. • Both real data analysis and simulation study are conducted. • BMDs estimated using hybrid method are more

Crescent and Electoral Strength: Islamic Party Portrait of Reform Era In Indonesia

Directory of Open Access Journals (Sweden)

LILI ROMLI

2013-12-01

Full Text Available The establishment of Islamic political parties in the reform era in Indonesia after the fall of Suharto (1998, considered as resurgence of political stream. There are several factors that led to the revival of Islamic parties after the New Order, the theological factor, historical, sociological, and reform factor. The presence of Islamic political parties after the New Order was apparently diverse and fragmented. In the political elite of Islam itself in establishing a political party based on Islam and there is also based on nationality, and in establishing political party was using substantially approach and there is also that use formalistic approach. In the reform era elections, political Islam has failed, in which Islamic parties do not receive optimal support from voters Islam. The failure of Islamic parties in election of reform era is caused of factor among Muslims has been change the orientation of political views. Islamic parties in the reform era stuck in a political myth quantity, and Islamic parties are also fragmented and fractured in to small forces.

Selfish third parties act as peacemakers by transforming conflicts and promoting cooperation.

Science.gov (United States)

Halevy, Nir; Halali, Eliran

2015-06-02

The tremendous costs of conflict have made humans resourceful not only at warfare but also at peacemaking. Although third parties have acted as peacemakers since the dawn of history, little is known about voluntary, informal third-party intervention in conflict. Here we introduce the Peacemaker Game, a novel experimental paradigm, to model and study the interdependence between disputants and third parties in conflict. In the game, two disputants choose whether to cooperate or compete and a third party chooses whether or not to intervene in the conflict. Intervention introduces side payments that transform the game disputants are playing; it also introduces risk for the third party by making it vulnerable to disputants' choices. Six experiments revealed three robust effects: (i) The mere possibility of third-party intervention significantly increases cooperation in interpersonal and intergroup conflicts; (ii) reducing the risk to third parties dramatically increases intervention rates, to everyone's benefit; and (iii) disputants' cooperation rates are consistently higher than third parties' intervention rates. These findings explain why, how, and when self-interested third parties facilitate peaceful conflict resolution.

Mauritania: an authoritarian regime and the reconfiguration of the party system

Directory of Open Access Journals (Sweden)

Raquel Ojeda García

2015-05-01

Full Text Available This investigation raises the question of whether Mauritania should be considered an authoritarian regime. The explanatory variable used is not the only factor, but in Mauritania’s case it is one that has been given little attention. It is an analysis of the party system and its level of institutionalisation through five indicators: the social rooting of the parties; personalism and the profile of the leader; the level of volatility; the calling and participation of the opposition parties in the boycott of the elections and the ultimate acceptance by those parties of their results. It starts from the premise that representative democracy is built on a party political structure and draws conclusions about the low level of institutionalisation of the party system and the authoritarianism of the Mauritanian regime.

Benchmark problems for numerical implementations of phase field models

International Nuclear Information System (INIS)

Jokisaari, A. M.; Voorhees, P. W.; Guyer, J. E.; Warren, J.; Heinonen, O. G.

2016-01-01

Here, we present the first set of benchmark problems for phase field models that are being developed by the Center for Hierarchical Materials Design (CHiMaD) and the National Institute of Standards and Technology (NIST). While many scientific research areas use a limited set of well-established software, the growing phase field community continues to develop a wide variety of codes and lacks benchmark problems to consistently evaluate the numerical performance of new implementations. Phase field modeling has become significantly more popular as computational power has increased and is now becoming mainstream, driving the need for benchmark problems to validate and verify new implementations. We follow the example set by the micromagnetics community to develop an evolving set of benchmark problems that test the usability, computational resources, numerical capabilities and physical scope of phase field simulation codes. In this paper, we propose two benchmark problems that cover the physics of solute diffusion and growth and coarsening of a second phase via a simple spinodal decomposition model and a more complex Ostwald ripening model. We demonstrate the utility of benchmark problems by comparing the results of simulations performed with two different adaptive time stepping techniques, and we discuss the needs of future benchmark problems. The development of benchmark problems will enable the results of quantitative phase field models to be confidently incorporated into integrated computational materials science and engineering (ICME), an important goal of the Materials Genome Initiative.

Developing Product Lines with 3rd-party components

NARCIS (Netherlands)

De Jonge, M.

2007-01-01

The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

A Web-Based System for Bayesian Benchmark Dose Estimation.

Science.gov (United States)

Shao, Kan; Shapiro, Andrew J

2018-01-11

Benchmark dose (BMD) modeling is an important step in human health risk assessment and is used as the default approach to identify the point of departure for risk assessment. A probabilistic framework for dose-response assessment has been proposed and advocated by various institutions and organizations; therefore, a reliable tool is needed to provide distributional estimates for BMD and other important quantities in dose-response assessment. We developed an online system for Bayesian BMD (BBMD) estimation and compared results from this software with U.S. Environmental Protection Agency's (EPA's) Benchmark Dose Software (BMDS). The system is built on a Bayesian framework featuring the application of Markov chain Monte Carlo (MCMC) sampling for model parameter estimation and BMD calculation, which makes the BBMD system fundamentally different from the currently prevailing BMD software packages. In addition to estimating the traditional BMDs for dichotomous and continuous data, the developed system is also capable of computing model-averaged BMD estimates. A total of 518 dichotomous and 108 continuous data sets extracted from the U.S. EPA's Integrated Risk Information System (IRIS) database (and similar databases) were used as testing data to compare the estimates from the BBMD and BMDS programs. The results suggest that the BBMD system may outperform the BMDS program in a number of aspects, including fewer failed BMD and BMDL calculations and estimates. The BBMD system is a useful alternative tool for estimating BMD with additional functionalities for BMD analysis based on most recent research. Most importantly, the BBMD has the potential to incorporate prior information to make dose-response modeling more reliable and can provide distributional estimates for important quantities in dose-response assessment, which greatly facilitates the current trend for probabilistic risk assessment. https://doi.org/10.1289/EHP1289.

Peoples Democratic Party in the Fourth Republic of Nigeria

Directory of Open Access Journals (Sweden)

Aliyu Mukhtar Katsina

2016-06-01

Full Text Available Their nature and functions make political parties central to democratic governance especially in the new democracies of Africa that face the challenge of building strong and enduring democratic institutions. It is accepted that the existing trend in most of these democracies of one big party dominating the political space weakens democracy and undermines its prospects for consolidation. Big parties—usually the ruling ones—exhibit tendencies such as absence of internal democracy that are antithetical to democratic governance. While observations such as these are incontestable, there is little understanding into the nature, character, ideology, and internal structure of big parties generally. In this article, I attempt to address this concern. Specifically, I examine the nature, structure, and ideology of the Peoples Democratic Party (PDP, Nigeria’s ruling party at the federal level with considerable strength at local level between 1999 and 2015. Relying on data obtained from multiple sources, I investigate the process of its formation, the nature of its ideology, internal organization, its electoral strength, and how absence of internal democracy contributed significantly to its defeat in 2015 general elections.

78 FR 49280 - 30-Day Notice of Proposed Information Collection: Third-Party Documentation Facsimile Transmittal...

Science.gov (United States)

2013-08-13

... calling the toll-free Federal Relay Service at (800) 877-8339. This is not a toll- free number. Copies of... produces an electronic version of the document that will be matched with the electronic application....g., permitting electronic submission of responses. HUD encourages interested parties to submit...

A 3D stylized half-core CANDU benchmark problem

International Nuclear Information System (INIS)

Pounders, Justin M.; Rahnema, Farzad; Serghiuta, Dumitru; Tholammakkil, John

2011-01-01

A 3D stylized half-core Canadian deuterium uranium (CANDU) reactor benchmark problem is presented. The benchmark problem is comprised of a heterogeneous lattice of 37-element natural uranium fuel bundles, heavy water moderated, heavy water cooled, with adjuster rods included as reactivity control devices. Furthermore, a 2-group macroscopic cross section library has been developed for the problem to increase the utility of this benchmark for full-core deterministic transport methods development. Monte Carlo results are presented for the benchmark problem in cooled, checkerboard void, and full coolant void configurations.

Secure Two-Party Computation with Low Communication

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Kölker, Jonas; Faust, Sebastian

2012-01-01

We propose a 2-party UC-secure protocol that can compute any function securely. The protocol requires only two messages, communication that is poly-logarithmic in the size of the circuit description of the function, and the workload for one of the parties is also only poly-logarithmic in the size...... on the knowledge of exponent in an RSA group, and build succinct zero-knowledge arguments in the CRS model....

Asynchronous Multi-Party Computation with Quadratic Communication

DEFF Research Database (Denmark)

Hirt, Martin; Nielsen, Jesper Buus; Przydatek, Bartosz

2008-01-01

We present an efficient protocol for secure multi-party computation in the asynchronous model with optimal resilience. For n parties, up to t < n/3 of them being corrupted, and security parameter κ, a circuit with c gates can be securely computed with communication complexity O(cn^2k) bits, which...... circuit randomization due to Beaver (Crypto’91), and an abstraction of certificates, which can be of independent interest....

Toxicological benchmarks for screening of potential contaminants of concern for effects on aquatic biota on the Oak Ridge Reservation, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Sutter, G.A. II (Oak Ridge National Lab., TN (United States)); Futrell, M.A. (East Tennessee State Univ., Johnson City, TN (United States)); Kerchner, G.A. (Harvard Coll., Cambridge, MA (United States))