WorldWideScience

Sample records for resource savings due

  1. Estimation of resource savings due to fly ash utilization in road construction

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Subodh; Patil, C.B. [Centre for Energy Studies, Indian Institute of Technology, New Delhi 110016 (India)

    2006-08-15

    A methodology for estimation of natural resource savings due to fly ash utilization in road construction in India is presented. Analytical expressions for the savings of various resources namely soil, stone aggregate, stone chips, sand and cement in the embankment, granular sub-base (GSB), water bound macadam (WBM) and pavement quality concrete (PQC) layers of fly ash based road formation with flexible and rigid pavements of a given geometry have been developed. The quantity of fly ash utilized in these layers of different pavements has also been quantified. In the present study, the maximum amount of resource savings is found in GSB followed by WBM and other layers of pavement. The soil quantity saved increases asymptotically with the rise in the embankment height. The results of financial analysis based on Indian fly ash based road construction cost data indicate that the savings in construction cost decrease with the lead and the investment on this alternative is found to be financially attractive only for a lead less than 60 and 90km for flexible and rigid pavements, respectively. (author)

  2. Save Our Water Resources.

    Science.gov (United States)

    Bromley, Albert W.

    The purpose of this booklet, developed as part of Project SOAR (Save Our American Resources), is to give Scout leaders some facts about the world's resources, the sources of water pollution, and how people can help in obtaining solutions. Among the topics discussed are the world's water resources, the water cycle, water quality, sources of water…

  3. Resource-saving inter-row cultivator

    Directory of Open Access Journals (Sweden)

    N. E. Rudenko

    2017-01-01

    Full Text Available Inter-row cultivators have some shortcomings: design is complicated due to placing on each section of a 4-unit (parallelogram suspension of working tools; as the copying means use wheels which are mounted at distance from working tools, in other vertical plane, and have negative effect on variability of tillage depth; working tools are V-shaped hoes with a crumbling angle not more than 16 degrees. In the operation course the parts of a leg and a hoe, moving in the soil, raise it and throw to the side, creating not aligned surface grooves are formed, imposed moist soil. These processes are exacerbated by increasing the operating speed of the cultivator. The authors offered a resource-saving inter-row cultivator with a radial suspension of working tools. A flat plate spring was used as a beam. This simplifies the design, eliminates the horizontal oscillations of the working tools, provides a constant pressing them in the process. The working tool in the form of a flat lancet plowshares with a spiral fixed on the leg was designed. Operating width of a ploughshare is of 420 mm, thickness equals 4 (5 mm. The spiral with a diameter of 50 mm is made of a carbon spring wire with a diameter of 2-3 mm. One hoe is set instead of three-five tines on each section, that significantly reduces material consumption. A plough share with a spiral form the swinging-loosening element that provides creating a fine lumpy topsoil. The ploughshare performs the copying functions therefore the additional copying wheels are not required. Tests showed that the new working tool of a cultivator allows to operate qualitatively at a speed up to 14-18 km/h.

  4. Economic evaluation of water loss saving due to the biological ...

    African Journals Online (AJOL)

    This paper focuses on water loss saving as the benefit derived from biological control of this plant between 1990 and 2013 at New Year's Dam, Alicedale, Eastern Cape, South Africa. Estimates of water loss due to evapotranspiration from water hyacinth vary significantly; therefore, the study used three different rates, high, ...

  5. THE ECONOMIC MECHANISM OF RESOURCE SAVINGS OF AIRLINE

    Directory of Open Access Journals (Sweden)

    T. Oleshko

    2014-03-01

    Full Text Available The essence of the economic mechanism of resource savings and the reasons of the relationships between them are defined in this article. Also the place and the role of each of the blocks are analyzed.

  6. Estimated Incident Cost Savings in Shipping Due to Inspections

    NARCIS (Netherlands)

    S. Knapp (Sabine); G.E. Bijwaard (Govert); C. Heij (Christiaan)

    2010-01-01

    textabstractThe effectiveness of safety inspections has been analysed from various angles, but until now, relatively little attention has been given to translate risk reduction into incident cost savings. This paper quantifies estimated cost savings based on port state control inspections and

  7. Estimated incident cost savings in shipping due to inspections

    NARCIS (Netherlands)

    Knapp, S.; Bijwaard, G.E.; Heij, C.

    2011-01-01

    The effectiveness of safety inspections of ships has been analysed from various angles, but until now, relatively little attention has been given to translate risk reduction into incident cost savings. This paper provides a monetary quantification of the cost savings that can be attributed to port

  8. Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

    OpenAIRE

    I. M.

    2017-01-01

    Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovati...

  9. Estimated incident cost savings in shipping due to inspections.

    Science.gov (United States)

    Knapp, Sabine; Bijwaard, Govert; Heij, Christiaan

    2011-07-01

    The effectiveness of safety inspections of ships has been analysed from various angles, but until now, relatively little attention has been given to translate risk reduction into incident cost savings. This paper provides a monetary quantification of the cost savings that can be attributed to port state control inspections and industry vetting inspections. The dataset consists of more than half a million ship arrivals between 2002 and 2007 and contains inspections of port state authorities in the USA and Australia and of three industry vetting regimes. The effect of inspections in reducing the risk of total loss accidents is estimated by means of duration models, in terms of the gained probability of survival. The monetary benefit of port state control inspections is estimated to range, on average, from about 70 to 190 thousand dollars, with median values ranging from about 20 to 45 thousand dollars. Industry inspections have even higher benefits, especially for tankers. The savings are in general higher for older and larger vessels, and also for vessels with undefined flag and unknown classification society. As inspection costs are relatively low in comparison to potential cost savings, the results underline the importance of determining ships with relatively high risk of total loss. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Resources for National Water Savings for Outdoor Water Use

    Energy Technology Data Exchange (ETDEWEB)

    Melody, Moya [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stratton, Hannah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dunham, Camilla [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-05-01

    In support of efforts by the U.S. Environmental Agency's (EPA's) WaterSense program to develop a spreadsheet model for calculating the national water and financial savings attributable to WaterSense certification and labeling of weather-based irrigation controllers, Lawrence Berkeley National Laboratory reviewed reports, technical data, and other information related to outdoor water use and irrigation controllers. In this document we categorize and describe the reviewed references, highlighting pertinent data. We relied on these references when developing model parameters and calculating controller savings. We grouped resources into three major categories: landscapes (section 1); irrigation devices (section 2); and analytical and modeling efforts (section 3). Each category is subdivided further as described in its section. References are listed in order of date of publication, most recent first.

  11. Energy savings due to building insulation of different thickness

    Directory of Open Access Journals (Sweden)

    Orzechowski Tadeusz

    2017-01-01

    Full Text Available In the plans of thermo-modernisation of historic buildings, strict requirements on energy performance are often relaxed. Detailed analyses are performed to select thermal upgrading technology that would ensure maximum environmental benefits while preserving the historic value of the building. The analysis of the costs of thermal upgrading with the use of heat-preserving plasters having different insulation properties is made for a coal-fired boiler plant. Optimal and advantageous ranges of insulation materials application are shown in reference to coal savings in boilers with variable and constant efficiency. Climatic conditions and environmental benefits are indicated.

  12. Inbound freight: an untapped resource for saving money.

    Science.gov (United States)

    Kuehn, Kurt

    2007-12-01

    With all the responsibilities placed on materials managers, it is not surprising that some processes such as shipping are overlooked when it comes to cutting costs. But by taking a closer look at inbound freight costs, materials managers might discover an untapped resource for saving thousands, and in some cases millions, of dollars. Finding out how costs vary among vendors for shipping the same type of item can eliminate unnecessary freight charges. Initially, the process takes time, but the bottom line will be better for it.

  13. RESOURCE SAVING IN CONSTRUCTION INDUSTRY WITH HIGHWAY BRANCH AS EXAMPLE

    Directory of Open Access Journals (Sweden)

    A. V. Roudensky

    2011-01-01

    Full Text Available Consumption of energy is an objective (independent on cost fluctuations technical efficiency criterion of any construction or repair work. Highway/road (particularly bituminous pavement sector is an important construction industry part. Bituminous road pavement construction consists of such components as excavation and preparation of basic materials, manufacture of mixes, ready mix laying/compacting and transportation of all materials. Average energy consumption for every bituminous pavement construction component is assessed. Approach to resource and energy saving presented in the article may be used in construction industry to develop and implement innovativetechnical and organizational solutions both of general application and for individual projects.

  14. Saving Alberta's resource revenues: Role of intergenerational and liquidity funds

    International Nuclear Information System (INIS)

    Bremer, Ton S. van den; Ploeg, Frederick van der

    2016-01-01

    We use a welfare-based intertemporal stochastic optimization model and historical data to estimate the size of the optimal intergenerational and liquidity funds and the corresponding resource dividend available to the government of the Canadian province Alberta. To first-order of approximation, this dividend should be a constant fraction of total above- and below-ground wealth, complemented by additional precautionary savings at initial times to build up a small liquidity fund to cope with oil price volatility. The ongoing dividend equals approximately 30 per cent of government revenue and requires building assets of approximately 40 per cent of GDP in 2030, 100 per cent of GDP in 2050 and 165 per cent in 2100. Finally, the effect of the recent plunge in oil prices on our estimates is examined. Our recommendations are in stark contrast with historical and current government policy. - Highlights: • Volatile natural resource income requires an intergenerational and liquidity fund. • We use intertemporal stochastic optimization and historical data for Alberta. • The ongoing dividend is 30 per cent of government revenue. • This requires assets of 100 per cent of GDP in 2050 and initial precautionary saving. • The effect of the 2014 plunge in oil prices on our estimates of the funds is examined.

  15. Saving maternal lives in resource-poor settings: facing reality.

    Science.gov (United States)

    Prata, Ndola; Sreenivas, Amita; Vahidnia, Farnaz; Potts, Malcolm

    2009-02-01

    Evaluate safe-motherhood interventions suitable for resource-poor settings that can be implemented with current resources. Literature review to identify interventions that require minimal treatment/infrastructure and are not dependent on skilled providers. Simulations were run to assess the potential number of maternal lives that could be saved through intervention implementation according to potential program impact. Regional and country level estimates are provided as examples of settings that would most benefit from proposed interventions. Three interventions were identified: (i) improve access to contraception; (ii) increase efforts to reduce deaths from unsafe abortion; and (iii) increase access to misoprostol to control postpartum hemorrhage (including for home births). The combined effect of postpartum hemorrhage and unsafe abortion prevention would result in the greatest gains in maternal deaths averted. Bold new initiatives are needed to achieve the Millennium Development Goal of reducing maternal mortality by three-quarters. Ninety-nine percent of maternal deaths occur in developing countries and the majority of these women deliver alone, or with a traditional birth attendant. It is time for maternal health program planners to reprioritize interventions in the face of human and financial resource constraints. The three proposed interventions address the largest part of the maternal health burden.

  16. Explosive Spalling of Fire Exposed Resource Saving Concrete Structures

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt; Hertz, Kristian Dahl; Kristiansen, Finn Harken

    2003-01-01

    The paper describes briefly a new test facility, which has been developed within the project “Resource Saving Concrete Structures”, also called “Green Concrete” and some test results from the project. A full report is available from the home page of the Department of Civil Engineering Kristiansen......, Hertz, Sørensen [1]. The main idea was to establish a test method by means of which it should be possible to assess whether a particular concrete has an increased risk of spalling compared to traditional concretes as defined in Hertz [2] and only using ordinary standard cylinders as test specimens....... The method has been applied on the green concretes of the project and later also as a first indicator in other projects. The method appears to be a valuable tool for the first investigation of new concretes...

  17. Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

    Directory of Open Access Journals (Sweden)

    I. M.

    2017-05-01

    Full Text Available Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovations in resource saving are recorded now as intangible assets. Recording of resource saving innovations and technologies at industrial companies is confined to recording of transactions on creation or acquisition of patent rights objects and intellectual property objects. The author’s approach to organization of audit by the conformity of resource saving innovations with M. Porter’s test is proposed. Data showing success story of a Ukrainian company manufacturing polyurethane foam sealant PENADO in the aerosol dispenser is used to confirm that Ukraine does have potentials to introduce and utilize resource saving technologies, including energy saving ones. The proposed model for recording and audit of resource saving innovations should be used in strategic planning of resource saving innovations at the companies incorporated in industrial groups or holdings. Using this model, a company can reveal and assess the mismatch between amounts of resources that can be allocated in innovation and real capacities for introducing innovative resource saving technologies, and factors having the strongest impact on recourse saving innovations at companies incorporated in one financial and industrial group or holding. The proposed model accounts for the specific operative conditions in holdings and tough conditions for business operation of industrial companies in Ukraine.

  18. HOUSEHOLD SAVINGS AS A SOURCE OF INVESTMENT RESOURCES IN UKRAINE

    Directory of Open Access Journals (Sweden)

    E. Nosova

    2015-03-01

    Full Text Available The approaches of scientists in definition of the household savings, the motives of their creation and the role they perform are identified; the role of household savings in the economy is described; the importance of household saving transformation from unorganized to organized forms is analyzed; the size of saving in financial and nonfinancial forms, its dynamics and structure are characterized; comparison between household savings and main macroeconomic indicators is conducted; ways of investment of households savings are discussed; the dynamics of deposits in banks and credit unions, the participation of households in collective investment schemes (private and corporate investment funds is characterized; the dynamics of household deposits in national and foreign currencies is shown; the dynamics of nominal value of investment fund’s securities, that have been placed among resident individuals are characterized; the dynamics of deposit accounts and the number of credit unions members are described; the comparative characteristics of different ways to invest money is given; the reasons of unorganized savings existence are marked; barriers to convert savings into investments and the ways of overcoming them are identified.

  19. Sphincter Saving Surgery in Low Rectal Carcinoma in a Resource ...

    African Journals Online (AJOL)

    Background: Surgery is the principal modality of treatment of rectal carcinoma in order to achieve cure. Sphincter saving surgery improves the quality of life of patients with low rectal carcinoma. Aim: To report a case of sphincter saving low anterior resection for low rectal cancer with hand sown colorectal anastomosis

  20. An analysis of growth factors of rapeseed at modern resource-saving technology

    Science.gov (United States)

    Filipova, M.; Zheleva, I.; Sulejmenova, N.; Abildaev, E.

    2017-10-01

    Nowadays the production of rapeseed has grown due to the variety of existing possibilities for its using. This calls the search for new, resource-saving technologies for its growing in Republic of Kazakhstan. For these new technologies it is needed to know which are the factors that influence the production of rapeseed and how each factor influence the production and the quality of this culture. The careful study of these factors is necessary for better understudying the process of the growing aimed increasing the yields and quantity of the rapeseed.

  1. Program-oriented approach to resource saving issues in construction materials industry

    Directory of Open Access Journals (Sweden)

    Novikova Galina

    2017-01-01

    Full Text Available The construction as a sector of the economy is one of the largest consumers of energy resources, and the building materials industry is today one of the most energy-intensive construction industry. At the enterprises of the building materials industry the different approaches and methods are used to solve resource and energy problems. Energy saving is considered not as an complex approach in the enterprise activity, but as activity for the implementation of specific energy-saving projects, which have limitations in time and in resources. The authors suggest to use a softwareoriented approach to solving the problems of resource and energy saving. For practical application of program-oriented approach we offer to use a structuring method of the decision-making, not previously used to solve problems of resource and energy saving.

  2. Resource-saving policy in the context of technological updating of ferroalloy production

    Directory of Open Access Journals (Sweden)

    Yelena Anatolyevna Pozdnyakova

    2011-06-01

    Full Text Available This paper substantiates the need for technological modernization of ferroalloy production which should be based on energy- and resource-saving technologies. Lean-technology is considered as a tool for effective management of material costs organization. A search algorithm for ways to improve the manufacturing process of a company, with which usage the author suggests a number of areas that require optimization, was developed. Measures aimed at solving the problems of resource-saving at JSC "Klyuchevsky Ferroalloy Plant" were proposed: introduction of resource saving technologies, suggesting involvement in the production of non-liquid products and the use of process waste and upgrading of individual processes. As a result of the proposed activities, tangible results have been achieved: reducing production costs, saving raw materials, reducing storage costs and release of additional areas, decrease of production losses.

  3. Saving Resources - Lesson plan of ESD in Geography

    Science.gov (United States)

    Iwamura, Takuya

    2010-05-01

    Geographical education has to perceive the world from diversified viewpoints by involving ESD (Education for Sustainable Development). This can be realized by teaching geography as an integrated science, including ESD that considers ecological, economic and social aspects.. In Japan especially, geographical education tends to emphasize the environmental aspects. The investigation of circumstances from diversified viewpoints helps to analyse the society scientifically and generates? the qualities of a global citizenship toward a sustainable society. And ESD aims at creating the values of sustainability, which is necessary for a global citizenship. In this context, I have developed the lesson plan of ESD in Geography at a secondary level.. Can advanced technologies foster sustainable development? The presentation shows the advanced technology-generated products and analyses the merits and failures with their effects on the global society. The examples of these products are hybrid cars and mobile phones. Cars are necessary for the mobility of our widespread modern society. On the other hand, it is also true that environmental pollution is becoming more serious by the increasing number of cars. We usually assume that economic development and environmental protection are contradictory. But hybrid cars which are coming to world attention now, have good gas mileage compared with normal cars, so they can conserve energy and cut down on the amount of exhaust at the same time. Mobile phones are necessary in business situations, as a tool that helps to communicate while moving. In addition, mobile phones are means that support the life of people living in sparsely populated areas like in Northern Europe. Here, we can curb costs for transmission facilities that were needed otherwise. There is one thing that underlies these advanced technology-generated products such as hybrid cars and mobile phones. The resource that makes the hybrid car technology and the miniaturization of

  4. The Resource Mapping Algorithm of Wireless Virtualized Networks for Saving Energy in Ultradense Small Cells

    Directory of Open Access Journals (Sweden)

    Sai Zou

    2015-01-01

    Full Text Available As the current network is designed for peak loads, it results in insufficient resource utilization and energy waste. Virtualized technology makes it possible that intelligent energy perception network could be deployed and resource sharing could become an effective energy saving technology. How to make more small cells into sleeping state for energy saving in ultradense small cell system has become a research hot spot. Based on the mapping feature of virtualized network, a new wireless resource mapping algorithm for saving energy in ultradense small cells has been put forward when wireless resource amount is satisfied in every small cell. First of all, the method divides the virtual cells. Again through the alternate updating between small cell mapping and wireless resource allocation, least amount of small cells is used and other small cells turn into sleeping state on the premise of guaranteeing users’ QoS. Next, the energy consumption of the wireless access system, wireless resource utilization, and the convergence of the proposed algorithm are analyzed in theory. Finally, the simulation results demonstrate that the algorithm can effectively reduce the system energy consumption and required wireless resource amount under the condition of satisfying users’ QoS.

  5. Guide to resource conservation and cost savings opportunities in the soap, detergents and related products sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The soaps, detergents and related products sector is an important component of the chemical industry within Ontario, as these products are used for cleaning purposes in industrial, institutional and domestic consumer applications. This guide was prepared to assist the sector with cost savings and resource conservation. The guide highlights opportunities for resource conservation through energy and water efficiency improvements, more efficient utilisation of raw materials, and reduction of environmental releases at source. 54 figs.

  6. Constant savings rates and quasi-arithmetic population growth under exhaustible resource constraints

    NARCIS (Netherlands)

    Asheim, G.B.; Buchholz, W.; Hartwick, J.M.; Mitra, T.; Withagen, C.A.A.M.

    2007-01-01

    In the Dasgupta–Heal–Solow–Stiglitz (DHSS) model of capital accumulation and resource depletion we show the following equivalence: if an efficient path has constant (gross and net of population growth) savings rates, then population growth must be quasi-arithmetic and the path is a maximin or a

  7. Resource-saving application of FDTD technique in 3D photonic crystal waveguide calculations

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Tromborg, Bjarne

    2002-01-01

    This paper presents an algorithm based on the well-known FDTD numerical method which is adapted for 3D problems of transmission and reflection of photonic crystal waveguides, and which effectively saves memory and computing resources. Specific examples showing its validity and effectiveness...

  8. Study into the feasibility of manufacturing liquid glass using resource-saving technology

    Directory of Open Access Journals (Sweden)

    Mizyuryaev Sergey

    2017-01-01

    Full Text Available The authors’ views on the problem of resource-saving in the production of building materials are outlined, with three main modes of resource-saving indicated: the use of cheap raw materials, a reduction in the production costs, and an increase in the efficiency of the produced materials and products. The research provides information on the production and use of liquid glass in industry, including the construction industry. The theoretical substantiation of the possibility of developing a resource-saving technology for the production of liquid glass for construction purposes is given. The work provides information on promising alternative raw material components - diatomite, natural rock and black ash, industrial waste. Their properties are given as well as the justification of their effective use as raw materials. The method of preparation of the components and their mixtures, the preparation of sodium silicate through roasting, and the identification of the suitability of the obtained product for the manufacture of efficient building materials are described. Conclusions are made in regards to the feasibility of producing liquid glass using resource-saving technology.

  9. Energy saving and emission reduction: A project of coal-resource integration in Shanxi Province, China

    International Nuclear Information System (INIS)

    Zhang Jianjun; Fu Meichen; Geng Yuhuan; Tao Jin

    2011-01-01

    The small or middle coal mines with illegal operations in developing countries or regions can cause bad energy waste and environmental disruption. The project of coal-resource integration in Shanxi Province of China gives a new idea or an approach to energy saving and emission reduction. It is a social- and economic-ecological project. The paper shows the targets of energy saving and emission reduction in Shanxi Province, and analyses the aims, significance, design process and implementation of the integration project. Based on that, the paper discusses the challenges and opportunities the project brings. The analysis shows that the project of coal-resource integration in developing countries or regions can effectively improve mining technologies, collect capital and impel international cooperation and exchange. Finally, the paper analyses the concerns about the future, including the possible problems of implementation period, industrial updating, environmental impact and re-employment. However, the successful integration of coal resources can mitigate energy crisis and climate crisis and promote cleaner production effectively. - Highlights: → Coal-resource integration gives a new idea or an approach to energy saving and emission reduction. → Coal-resource integration mitigates climate crisis and promotes cleaner production. → Coal-resource integration brings challenges and opportunities to traditional mining industries.

  10. Mental effort causes vigilance decrease due to resource depletion

    NARCIS (Netherlands)

    Smit, A.S.; Eling, P.A.T.M.; Coenen, A.M.L.

    2004-01-01

    The resource view on vigilance performance was tested. First, a low demanding task was compared with a similar low demanding task in which stimulus presentation was less monotonous due to added, irrelevant, stimuli. The resource view, maintaining that vigilance is lowered by hard mental work,

  11. Guide to resource conservation and cost savings opportunities in the dairy processing sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This guide identifies and promotes opportunities for conserving energy and water, as well as reducing waste, in the dairy processing sector. The guide begins with an introduction and a profile of Ontario`s dairy processing sector, outlining the context for resource conservation and cost savings opportunities. It then outlines the rationale and the generic processes selected for careful examination of resource conservation and cost savings opportunities. Subsequent chapters describe the energy, water, and material resources commonly used in relation to the generic processes; the air, water, and solid waste residuals commonly derived from those processes; and new technologies with potential application in dairy processing. The generic processes covered in the guide are for fluid milk, cheese, ice cream and frozen products, cultured products such as yogurt, butter, and dried or evaporated products. The report ends with additional useful information for dairy processors.

  12. Time to propagate green building construction concept for saving precious resources sustainable development

    International Nuclear Information System (INIS)

    Ali, Z.

    2005-01-01

    At present, we are constructing houses and buildings without giving any consideration to consumption of resources at the time of construction and consumption of resources for the use of such houses or buildings. ; Although green is our color but we are doing little about green building. Time has now come to propagate Green Building Construction Concepts in order to save our precious resources. The paper deals with dire need of awareness about conservation of water, conservation of energy, use of local materials, use of natural materials, etc. (author)

  13. Resource approach in providing health-saving process of future teachers training

    Directory of Open Access Journals (Sweden)

    Mykytiuk S.A.

    2012-12-01

    Full Text Available The mechanisms of realization of resource approach are exposed in organization of pedagogical education. There were defined the ways of providing health-saving teacher training, namely: assessment criteria of adjustment of social order and personal professional development needs, means of implementing the tasks of pedagogical education concept according to the resource approach. The methods of maintainance and strengthening of health of future teachers are specified in the process of professional preparation. It is marked that resource approach unites requirement to the competence of teacher, provides the account of age-dependent features of organism of student and periods of becoming of personality of student and teacher. Resource approach is given by possibility to take into account the specific of labour and level of knowledge, abilities and skills of every student. Resource approach harmonizes the actual aspects of complex of the modern scientific going near education of students and professional preparation of future teachers.

  14. Fuel and power resources based on energy-saving technologies and technical means in agriculture

    Directory of Open Access Journals (Sweden)

    A. V. Tikhomirov

    2015-01-01

    Full Text Available The state and efficiency of the use of the energy supply systems in agriculture were analyzed. It is demonstrated that grids and power equipment deterioration exceeds 30 percent, and fuel volume-efficiency ratio is not more than 35 percent in this sector. A considerable part of the country territory (mainly the northern one does not have centralized power supply. Decentralized cogeneration systems with extensive use of renewable energy sources and local energy recourses are highly efficient for this part. A necessity of development of methodology and recommendations for the selection of efficient systems and technical means of power supply to agricultural enterprises was substantiated with due consideration of their location, load intensity and distance from centralized grids. The most important indication of energy efficiency is energy intensity of products and energy inputs share in the production cost. Reserves for energy saving including the development of energy-efficient technologies and technical means, some of which have already been developed (equipment for lighting, microclimate, primary treatment and storage of products, disinfection or are at the completion stage were presented. Their implementation in agricultural production will make it possible to raise considerably the efficiency of the use of fuel and power resources and to reduce energy consumption. The conditions in which the use of decentralized power supply systems is most efficient were educed. The characteristics of related equipment and the specifics of its use at agricultural enterprises are described. The proposal and priority actions for the development and upgrading of power supply systems for agriculture have been elaborated.

  15. Saving energy resources during heat treatment - the most important problem of the branch

    Energy Technology Data Exchange (ETDEWEB)

    Zadernovskiy, V V; Firger, I V

    1980-01-01

    Natural gas fired thermal furnaces expend significantly less fuel than electric furnaces with an equal quality of metal heating. An important reserve in power reserve economy is the use of the forging heat in an article for heat treatment (TOB), where besides the power resources, metal is also saved as a result of the reduction in the volume of heating means and production spaces. From the experience in the progressive enterprises of the branch, in a number of cases it is possible to combine heating for plastic deformation with heating for primary or secondary heat treatment. Other measures are examined which save power resources in heat treatment: the use of thermal furnaces for aerodynamic heating, the use of local heat treatment, the reduction in the duration of the heat treatment processes, savings in the power carriers during heat treatment in furnaces with a roll out hearth. Fibrous refractory materials are being used more and more as fettling materials in the construction of thermal furnaces.

  16. Daylight saving time transitions and hospital treatments due to accidents or manic episodes

    Directory of Open Access Journals (Sweden)

    Lönnqvist Jouko

    2008-02-01

    Full Text Available Abstract Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment.

  17. Daylight saving time transitions and hospital treatments due to accidents or manic episodes

    Science.gov (United States)

    Lahti, Tuuli A; Haukka, Jari; Lönnqvist, Jouko; Partonen, Timo

    2008-01-01

    Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment. PMID:18302734

  18. Development of Technological Profiles for Transfer of Energy- and Resource Saving Technologies

    Directory of Open Access Journals (Sweden)

    Lysenko, V.S.

    2015-01-01

    Full Text Available The article deals with the methodological foundations for the development of technological profiles for «System of Transfer of Energy- and Resource Saving Technologies». It is determined that a compliance with the methodology and standards of the European network «Relay Centers» (Innovation Relay Centers — IRC network, since 2008 — EEN, the Russian Technology Transfer Network RTTN and Uk rainian Technology Transfer Network UTTN is the main pri nciple of the development process of technological requests and offers.

  19. The influence of an estimated energy saving due to natural ventilation on the Mexican energy system

    DEFF Research Database (Denmark)

    Oropeza-Perez, Ivan; Østergaard, Poul Alberg

    2014-01-01

    This article shows the impacts of the extensive use of NV (natural ventilation) in the Mexican residential sector on the Mexican energy system. By integrating a thermal-airflow simulation programme with an energy systems analysis model, the impact on the Mexican energy system of replacing air...... conditioning, in particular, with natural ventilation to cool residential buildings is determined. It is shown that when, as in Mexico, there is a relatively simple connection between supply and electricity demand, NV creates savings which could be used to reduce either the fossil-fuel-based generation...

  20. Environmental engineering: Saving a threatened resource--In search of solutions

    International Nuclear Information System (INIS)

    Linaweaver, F.P.

    1992-01-01

    This proceedings, Environmental Engineering: Saving a Threatened Resource--In search of solutions, contains papers presented at the 1992 National Conference on Environmental Engineering, a component of Water Forum '92, Baltimore, Maryland, August 2-5, 1992. Some of the topics addressed include air quality; environmental assessment; sludge management and disposal; solid waste, toxic and hazardous materials; water supply and treatment; and water/wastewater infrastructure. In addition, key areas explored are toxicity reduction; urban nonpoint source pollution; incineration; landfills; leachate control; and VOC emissions from wastewater treatment plants. This publication provides the environmental engineer with state-of-the-art information on practical environmental engineering and results from recent advancements in scientific knowledge in this field. Individual papers are processed separately for inclusion in the appropriate data bases

  1. MODERN RESOURCE-SAVING TECHNOLOGIES IN FOUNDRY PRODUCTION OF JSC «MINSK TRAKTOR PLANT»

    Directory of Open Access Journals (Sweden)

    F. A. Domotenko

    2016-01-01

    Full Text Available In article the main world tendencies of development of the production technology of sandy cores and value of this production in complex technology of manufacture of castings are considered. It is established that the most rational way of production technically and economically is manufacture of wafer sandy cores using the Cold-box-amin technology. Scientific, technical, technological and economic aspects of modernization of foundry production of JSC MTZ with complete transition to production of sandy cores on the resource-saving Cold-box-amin technology are provided. The main distinctive feature of this reequipment – all planned works are based on the domestic technological developments and the equipment created in the cooperation by specialists of JSC BELNIILIT and JSC MTZ. Within GNTP essential support to the provided works was given by the state.

  2. Forecasting the Optimal Factors of Formation of the Population Savings as the Basis for Investment Resources of the Regional Economy

    Directory of Open Access Journals (Sweden)

    Odintsova Tetiana M.

    2017-04-01

    Full Text Available The article is aimed at studying the optimal factors of formation of the population savings as the basis for investment resources of the regional economy. A factorial (nonlinear correlative-regression analysis of the formation of savings of the population of Ukraine was completed. On its basis a forecast of the optimal structure and volumes of formation of the population incomes was carried out taking into consideration impact of fundamental factors on these incomes. Such approach provides to identify the marginal volumes of tax burden, population savings, and capital investments, directed to economic growth.

  3. Drones may be used to save lives in out of hospital cardiac arrest due to drowning.

    Science.gov (United States)

    Claesson, A; Svensson, L; Nordberg, P; Ringh, M; Rosenqvist, M; Djarv, T; Samuelsson, J; Hernborg, O; Dahlbom, P; Jansson, A; Hollenberg, J

    2017-05-01

    Drowning leading to out-of-hospital cardiac arrest (OHCA) and death is a major public health concern. Submersion with duration of less than 10min is associated with favorable neurological outcome and nearby bystanders play a considerable role in rescue and resuscitation. Drones can provide a visual overview of an accident scene, their potential as lifesaving tools in drowning has not been evaluated. The aim of this simulation study was to evaluate the efficiency of a drone for providing earlier location of a submerged possible drowning victim in comparison with standard procedure. This randomized simulation study used a submerged manikin placed in a shallow (drone transmitting video to a tablet (intervention). Time from start to contact with the manikin was the primary endpoint. Twenty searches were performed in total, 10 for each group. The median time from start to contact with the manikin was 4:34min (IQR 2:56-7:48) for the search party (control) and 0:47min (IQR 0:38-0:58) for the drone-system (intervention) respectively (pdrone was 3:38min (IQR 2:02-6:38). A drone transmitting live video to a tablet is feasible, time saving in comparison to traditional search parties and may be used for providing earlier location of submerged victims at a beach. Drone search can possibly contribute to earlier onset of CPR in drowning victims. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Resource savings and outcomes associated with outpatient laparoscopic appendectomy for nonperforated appendicitis.

    Science.gov (United States)

    Gurien, Lori A; Burford, Jeffrey M; Bonasso, Patrick C; Dassinger, Melvin S

    2017-11-01

    Postoperative admission for acute appendicitis utilizes health care system resources. We evaluated outcomes and hospital charges for children with nonperforated appendicitis who underwent outpatient laparoscopic appendectomy. A retrospective chart review was performed for patients ≤18years old who underwent laparoscopic appendectomy for acute appendicitis in 2015. Patients were categorized into discharge from postanesthesia care unit (PACU) (outpatient), admission for 24-h. Continuous variables were compared using analysis of variance and categorical variables were compared using chi-square test, with p24-h. There were no differences in postoperative emergency department/clinic visits, complications, or readmissions. Hospital charges for admission 24-h were $1007 and $2237 more per patient than the PACU-discharge group, respectively. Outpatient laparoscopic appendectomies became more common over time, occurring in only 20% of patients with acute appendicitis in the first quarter of the year versus 49% of patients in the last quarter. Outpatient laparoscopic appendectomy for nonperforated appendicitis in children is a safe practice that decreases length of stay and hospital charges. Adoption of an outpatient strategy allows for better standardization of care and can lead to savings in health care resources. III (Treatment: retrospective comparative study). Copyright © 2017 Elsevier Inc. All rights reserved.

  5. New Control Paradigms for Resources Saving: An Approach for Mobile Robots Navigation

    Directory of Open Access Journals (Sweden)

    Rafael Socas

    2018-01-01

    Full Text Available In this work, an event-based control scheme is presented. The proposed system has been developed to solve control problems appearing in the field of Networked Control Systems (NCS. Several models and methodologies have been proposed to measure different resources consumptions. The use of bandwidth, computational load and energy resources have been investigated. This analysis shows how the parameters of the system impacts on the resources efficiency. Moreover, the proposed system has been compared with its equivalent discrete-time solution. In the experiments, an application of NCS for mobile robots navigation has been set up and its resource usage efficiency has been analysed.

  6. New Control Paradigms for Resources Saving: An Approach for Mobile Robots Navigation.

    Science.gov (United States)

    Socas, Rafael; Dormido, Raquel; Dormido, Sebastián

    2018-01-18

    In this work, an event-based control scheme is presented. The proposed system has been developed to solve control problems appearing in the field of Networked Control Systems (NCS). Several models and methodologies have been proposed to measure different resources consumptions. The use of bandwidth, computational load and energy resources have been investigated. This analysis shows how the parameters of the system impacts on the resources efficiency. Moreover, the proposed system has been compared with its equivalent discrete-time solution. In the experiments, an application of NCS for mobile robots navigation has been set up and its resource usage efficiency has been analysed.

  7. ANALYSIS AND APPLICATION PROSPECTS OF EFFECTIVE RESOURCES-SAVING TECHNOLOGIES IN CONCRETE MANUFACTURE

    Directory of Open Access Journals (Sweden)

    H. P. Ivanova

    2014-10-01

    Full Text Available Purpose. Prospectivity assessments of the nano-materials usage in construction technologies at the same time meeting the requirements of environmental safety and rational use of the natural resources. Methodology. During the study the building composites, in particular concretes, which are obtained on the base of the raw materials, which are introduced in the array of micro- and nanolevels were researched and analyzed. The deformation and deterioration processes of nanostructured concrete depending on their composition and manufacture parameters were simulated. Findings. Concrete manufacture is in the direct dependence on its components. Due to the extraction and processing of these components land degradation occurs because of soil destruction with oversize pits, which threatens the ecology of the environment. In this connection there is a need for another concept of building materials receiving for concrete manufacture. The new branch of science based on nanotechnologies, nanomaterials and nanostructuring is a key to its foundation. The special features of nanostructured concretes are the nanoagents in their composition (carbon nanotubes, mechanoactivated slags of blast furnace production. The study of deformation patterns and concrete deterioration based on the mechanoactivated material will purposefully affect the structure, physical and chemical properties, as well as the mechanical and deformational ones. Originality. The researches have shown that nano-structured concrete had high fluidity. The strength of such compositions is enhanced up to 13 % without reduction of concrete consumption and up to 8.8% at 10% reduced concrete consumption. Practical value. The application of the structured concretes based on the mechanoactivated material will increase the efficiency of the industrial wastes recycling and improve the physical, mechanical and technological properties of the produced composites. From the standpoint of the economic benefits

  8. Cost-Savings Achieved in Two Semesters through the Adoption of Open Educational Resources

    Science.gov (United States)

    Hilton, John Levi, III; Robinson, Jared; Wiley, David; Ackerman, J. Dale

    2014-01-01

    Textbooks represent a significant portion of the overall cost of higher education in the United States. The burden of these costs is typically shouldered by students, those who support them, and the taxpayers who fund the grants and student loans which pay for textbooks. Open educational resources (OER) provide students a way to receive…

  9. Shared Urban Greywater Recycling Systems: Water Resource Savings and Economic Investment

    Directory of Open Access Journals (Sweden)

    Dexter V.L. Hunt

    2013-07-01

    Full Text Available The water industry is becoming increasingly aware of the risks associated with urban supplies not meeting demands by 2050. Greywater (GW recycling for non-potable uses (e.g., urinal and toilet flushing provides an urban water management strategy to help alleviate this risk by reducing main water demands. This paper proposes an innovative cross connected system that collects GW from residential buildings and recycles it for toilet/urinal flushing in both residential and office buildings. The capital cost (CAPEX, operational cost (OPEX and water saving potential are calculated for individual and shared residential and office buildings in an urban mixed-use regeneration area in the UK, assuming two different treatment processes; a membrane bioreactor (MBR and a vertical flow constructed wetland (VFCW. The Net Present Value (NPV method was used to compare the financial performance of each considered scenario, from where it was found that a shared GW recycling system (MBR was the most economically viable option. The sensitivity of this financial model was assessed, considering four parameters (i.e., water supply and sewerage charges, discount rate(s, service life and improved technological efficiency, e.g., low flush toilets, low shower heads, etc., from where it was found that shared GW systems performed best in the long-term.

  10. Reconstruction of refinery industry in Chechen Republic on the resource- and energy-saving basis

    Energy Technology Data Exchange (ETDEWEB)

    Geieva, L.A.; Meshalkin, V.P.; Sarkissov, P.D. [Mendeleev Univ. of Chemical Technology of Russia, Moscow (Russian Federation); Hadzhiev, S.N. [Inst. of Petrochemical Synthesis of Russian Academy of Sciences after A.V. Topchiev (Russian Federation)

    2003-07-01

    In 2000, the Russian Federation implemented measures to increase oil production in the Chechen Republic from 73 thousand metric tons to 1.5 million metric tons by 2002. As a result, the oil refining industry in the Chechen Republic is currently in a state of crisis. More advanced and effective refining processes are required along with a reduction in production costs. The reconstruction program for refineries in Grozny requires new process system designs that can handle the appropriate petroleum products in the correct quantities and required qualities. There is also a need to balance the use of natural resources with fixed facilities and operating costs. The challenge to design optimal process systems for refineries in Grozny is both multicriterial and complex. The design will have to consider the use of various crudes and petroleum products. Advances in refining capability and resource conservation technologies would lead to greater energy consumption resulting from additional petroleum production.

  11. The Multiplying Influence of Savings of Population and the Financial Resources of Enterprises on the Socio-Economic Development of Regions of Ukraine

    Directory of Open Access Journals (Sweden)

    Odintsova Tetiana M.

    2017-03-01

    Full Text Available The article is aimed at studying the influence of the population’s savings and the financial resources of enterprises on the socio-economic development of the regions of Ukraine. Conditions for stabilizing and improving the socio-economic level of development of regions were considered, based on the multiplying influence of savings through transformation of them into capital investments through the network chain of «gross regional product – population income – spending – taxes – savings – capital investment – gross regional product». The thesis that the multiplying effect of savings of population manifests and fosters the economic growth on the assumption that the savings provide the formation of capital investments, aimed at the growth of the gross regional product, has been substantiated.

  12. Resource-saving technology for manufacturing billets for piston’s rings

    Directory of Open Access Journals (Sweden)

    A. N. Krutilin

    2010-10-01

    Full Text Available Piston’s rings are one of the most critical parts of heavy-duty engines for wear-work in conditions of prolonged exposure of alternating loads and high temperatures. Currently in the world production of billets for piston’s rings is dominated by the two methods of casting: production of individual and oiling billets of gray and ductile cast iron in green-sand mold and shell mold and centrifugal casting method (intended primarily for oiling billets of ductile iron; the technology for individual production billets for piston’s rings with a diameter up to 250 mm, from 250 to 450 mm with individual and oiling ways, over 450 mm - preference of oiling billet. The best parameters of physical-mechanical and operational characteristics piston’s rings are in the case of manufacture of billets to the maximum extent approaching the configuration to the finished product. The rings made of shaped billets are characterized by uniform distribution of properties from the perimeter, provide a given diagram of pressures and full fit to the cylinder. Because of deficiencies of traditional methods of casting, continuous quality requirements for billets, the need for economy of material, fuel and energy resources, are finding new progressive technological processes of production of high-quality billets for piston’s rings. One of the most promising for piston rings billet is a method of casting consists of immersing the sand molds into the melt. It is interesting idea, expressed by A. Sutherland and subsequently patented in several countries in the way of casting method, called "immersion pouring technology" (ICT-Immersion Casting Technique [1]. Experiments, conducted in the laboratory of the Belarusian National Technical University, have identified significant shortcomings of immersion method of casting. When forms are immersing, have an intensive gassing in molten metal, and freezing of the metal on the out surface of the form. But despite some

  13. RESOURCE SAVING TECHNOLOGICAL PROCESS OF LARGE-SIZE DIE THERMAL TREATMENT

    Directory of Open Access Journals (Sweden)

    L. A. Glazkov

    2009-01-01

    Full Text Available The given paper presents a development of a technological process pertaining to hardening large-size parts made of die steel. The proposed process applies a water-air mixture instead of a conventional hardening medium that is industrial oil.While developing this new technological process it has been necessary to solve the following problems: reduction of thermal treatment duration, reduction of power resource expense (natural gas and mineral oil, elimination of fire danger and increase of process ecological efficiency. 

  14. Guide to resource conservation and cost savings opportunities in the food service sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Opportunities for conserving energy and water, as well as reducing waste, within the 24,000 establishment-strong food service sector in Ontario are identified. Operators are encouraged to take advantage of these opportunities to lower their costs while conserving valuable resources at the same time. In preparing this guide, site visits were carried out at six food service facilities in Ontario. Information about how much money is generally spent on energy, water and waste management by food service operators is provided. The amount and type of waste generated by these facilities is also described. The volatility of the commercial food service market place was identified as one of the major impediments to energy conservation. It was found that most owners of the food service facilities make business decisions based on the lowest first costs, irrespective of longer-term energy efficiency and operating costs. 31 refs., 13 tabs., 9 figs., 4 appendices.

  15. Application of granulated lead-zinc slag in concrete as an opportunity to save natural resources

    Science.gov (United States)

    Alwaeli, Mohamed

    2013-02-01

    The last decades marked a period of growth and prosperity in construction industry which involves the use of natural resources. This growth is jeopardized by the lack of natural resources that are available. On the other hand there has been rapid increase in the industrial waste production. Most of the waste do not find any effective use and cause a waste disposal crisis, thereby contributing to health and environmental problems. Recycling of industrial waste as aggregate is thus a logical option to manage this problem. The paper reports on some experimental results obtained from the production of concretes containing granulated slag of lead and zinc industry as sand replacement mixed in different proportions. Granulated slag is substituted for raw sand, partly or totally. Ratios of 25%, 50%, 75% and 100% by weight of sand are used. The effects of granulated lead-zinc slag (GLZS) as sand replacement material on the compressive strength and gamma radiation attenuation properties of concrete are investigated and analyzed. Then, these properties are compared with those of ordinary concrete. The results showed that replacement material have some effects on the compressive strength and gamma radiation properties of the concrete. The experimental results indicate that, the concrete mixed with GLZS as a sand replacement have better strength. Concerning the absorption properties for gamma radiation the data show that the addition of GLZS resulted in an increase of the attenuation of gamma radiation. Consequently, these concretes could be used for construction of shields protecting personnel who work in laboratories where radiation is used. Additionally, the thickness of the concrete with GLZS was calculated and compared with ordinary concrete.

  16. Application of granulated lead–zinc slag in concrete as an opportunity to save natural resources

    International Nuclear Information System (INIS)

    Alwaeli, Mohamed

    2013-01-01

    The last decades marked a period of growth and prosperity in construction industry which involves the use of natural resources. This growth is jeopardized by the lack of natural resources that are available. On the other hand there has been rapid increase in the industrial waste production. Most of the waste do not find any effective use and cause a waste disposal crisis, thereby contributing to health and environmental problems. Recycling of industrial waste as aggregate is thus a logical option to manage this problem. The paper reports on some experimental results obtained from the production of concretes containing granulated slag of lead and zinc industry as sand replacement mixed in different proportions. Granulated slag is substituted for raw sand, partly or totally. Ratios of 25%, 50%, 75% and 100% by weight of sand are used. The effects of granulated lead–zinc slag (GLZS) as sand replacement material on the compressive strength and gamma radiation attenuation properties of concrete are investigated and analyzed. Then, these properties are compared with those of ordinary concrete. The results showed that replacement material have some effects on the compressive strength and gamma radiation properties of the concrete. The experimental results indicate that, the concrete mixed with GLZS as a sand replacement have better strength. Concerning the absorption properties for gamma radiation the data show that the addition of GLZS resulted in an increase of the attenuation of gamma radiation. Consequently, these concretes could be used for construction of shields protecting personnel who work in laboratories where radiation is used. Additionally, the thickness of the concrete with GLZS was calculated and compared with ordinary concrete. - Highlights: ► Utilization of granulated lead–zinc slag as sand replacement in concrete was investigated. ► Compressive strength and gamma attenuation of concrete included granulated slag was examined. ► The tests results

  17. ONCE AGAIN ABOUT DETERMINATION OF SAVING OF ENERGY FOR TRACTION DUE TO PARTIAL CUT–OFF OF TRACTION ENGINES OF ELECTRIC ROLLING STOCK

    Directory of Open Access Journals (Sweden)

    G. K. Getman

    2013-09-01

    Full Text Available Purpose. In general the well known methods for determination of energy saving due to the partial traction engines cut-off based on their comparison to efficiency coefficient or to the power of energy losses do not allow objective estimation of efficiency of these measures and in a number of cases result in erroneous results and errors. The search for new more advanced methods for determination of energy saving at the partial cut-off of the traction engines is needed. Methodology. The method of calculation determination of energy saving when partial cutting-off of the traction engines is offered. It is based on the use of rationality coefficient as the loading mode of the electric power consumption for the measuring instrument of transportation activity. Findings. Using the given mathematical expressions it is possible to determine the energy saving in both the relative and absolute values and set the terms (motion speed and route gradient, under which the energy saving will take place. Originality. The method of the task solving, which is based on the evaluation of energy consumption differences for the compared variants (not on the comparison of efficiency coefficient or differences of power of energy losses is offered. Practical value. The given methodology allows obtaining more exact conclusions in relation to the electric power consumption, as the comparison of energy losses power or the efficiency coefficient does not determine precisely the electric power consumption for traction. Therefore the conclusions based on the comparison of power of energy losses or efficiency coefficient can appear inexact.

  18. Resource-saving recycling technology of lipid-containing waste of the fishing industry

    Directory of Open Access Journals (Sweden)

    Kurkotilo V. N.

    2017-09-01

    Full Text Available Nowadays the resource component of fish waste is underutilized, while it has unique properties of fish raw material. The topical area of research is the search for new technologies for processing waste to produce fish oil as a valuable source of polyunsaturated fatty acids, fat-soluble vitamins and other biologically active substances. In the work the technology of enzymatic hydrolysis of fish wastes has been tested and compared with the traditional thermal technology of obtaining fat from fish waste. The object of the study has been frozen waste from the herring processing. The optimal parameters of obtaining fish oil from processing wastes has been determined by simulating the process by the method of mathematical planning of experiment using orthogonal central composite plan of the second order for two factors. The variation of the factors of traditional thermal processing has been carried out in the temperature range of 60 ± 10 °C for 120 ± 20 min. Enzymatic hydrolysis has been held using the enzyme preparation of proteolytic action Protosubtilin G3x (Protosubtilin G3x in the range factors of 0.20 ± 0.05 g/kg dose of enzyme for 80 ± 20 min at the optimal temperature of hydrolysis. Organoleptic indicators of fat (appearance, color, smell, taste, transparency have been determined in accordance with the requirements of state standards. The derived lipid drug has been subjected to research on indicators of safety in accordance with the requirements of Technical regulations of the Customs Union "On safety of food products". The safety performance of the obtained samples of fat (peroxide and acid numbers has been determined by the standard methods. The constructed mathematical models contribute to optimizing the processing of fish waste. Comparison of the quality and safety indices of the obtained fish oil preparations has allowed substantiate the advantages of enzymatic processing of fish waste.

  19. Energy Savings Lifetimes and Persistence

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, Ian M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Todd, Annika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Billingsley, Megan A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goldman, Charles A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-02-01

    This technical brief explains the concepts of energy savings lifetimes and savings persistence and discusses how program administrators use these factors to calculate savings for efficiency measures, programs and portfolios. Savings lifetime is the length of time that one or more energy efficiency measures or activities save energy, and savings persistence is the change in savings throughout the functional life of a given efficiency measure or activity. Savings lifetimes are essential for assessing the lifecycle benefits and cost effectiveness of efficiency activities and for forecasting loads in resource planning. The brief also provides estimates of savings lifetimes derived from a national collection of costs and savings for electric efficiency programs and portfolios.

  20. Disk Rock Cutting Tool for the Implementation of Resource-Saving Technologies of Mining of Solid Minerals

    Science.gov (United States)

    Manietyev, Leonid; Khoreshok, Aleksey; Tsekhin, Alexander; Borisov, Andrey

    2017-11-01

    The directions of a resource and energy saving when creating a boom-type effectors of roadheaders of selective action with disc rock cutting tools on a multi-faceted prisms for the destruction of formation of minerals and rocks pricemax are presented. Justified reversing the modes of the crowns and booms to improve the efficiency of mining works. Parameters of destruction of coal and rock faces by the disk tool of a biconical design with the unified fastening knots to many-sided prisms on effectors of extraction mining machines are determined. Parameters of tension of the interfaced elements of knots of fastening of the disk tool at static interaction with the destroyed face of rocks are set. The technical solutions containing the constructive and kinematic communications realizing counter and reverse mode of rotation of two radial crowns with the disk tool on trihedral prisms and cases of booms with the disk tool on tetrahedral prisms in internal space between two axial crowns with the cutter are proposed. Reserves of expansion of the front of loading outside a table of a feeder of the roadheader of selective action, including side zones in which loading corridors by blades of trihedral prisms in internal space between two radial crowns are created are revealed.

  1. Saving on natural resources with SRO - desalination of industrial waste water for reuse at ESKOM Tutuka (two years operating experience)

    Energy Technology Data Exchange (ETDEWEB)

    Walt, Mike van der; Wessels, A.

    2001-07-01

    Natural resources are protected and saved with the new spiral reverse osmosis (SRO) plant at the Eskom Tutuka power station in the Mpumalanga province of South Africa. 7,000 m{sup 3}/day of saline underground mine water blended with 5,400 m{sup 3}/day of cooling water blowdown is pretreated and desalinated before the product water is returned to the cooling water circuit. Weir Envig designed, constructed, installed and commissioned the plant in phases between August 1998 and April 1999 with innovative use of existing infrastructure and phased removal of the live, ageing electrodialysis reversal plant. The plant performance during two years of operation is presented, which demonstrates that good pretreatment and cleaning system design allows SRO to produce consistent high-quality water from this difficult and varying feed. The result is a coal mine with no effluent problems, a new source of water for the power station and a treatment plant, which produces significantly better condenser cooling water and maintain zero liquid discharge. (orig.)

  2. Variation of magnetic properties with mischmetal content in the resource saving magnets of MM-Fe-B ribbons

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhu-bai, E-mail: lzbgj@163.com [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang, Li-chen [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Geng, Xiao-peng [Inner Mongolia Baotou Steel Rare Earth Magnetic Materials Co.Ltd, Baotou 014030 (China); Hu, Feng-xia; Sun, Ji-rong; Shen, Bao-gen [State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

    2017-03-15

    Magnetic materials of MM-Fe-B (MM=mischmetal) ribbons were prepared using melt spinning method by varying the content of MM. The ribbons contain minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. X-ray techniques show that the diffraction peak intensities of the minor phase Fe{sub 3}B vary with the content of constituent elements, indicating that the amount of minor phase could be tunable. The squareness of hysteresis loop is the best in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, which should mainly ascribe to the less amount of minor phase. Henkel plots verify the more uniform magnetization reversals in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons, and the energy product achieves to the maximum of 12.74 MGOe with the coercivity of 6.50 kOe. With the increase of MM content the coercivity increases monotonically, and reaches to 9.13 kOe in MM{sub 15}Fe{sub 77.5}B{sub 7.5} ribbons, which should be related with the nature of the defects in the main phase. These investigations show that optimizing the content of constituent elements and phase constitution could improve magnetic properties in the resource-saving magnets of MM-Fe-B ribbons. - Highlights: • MM-Fe-B (MM=mischmetal) ribbons contains the minor phases besides the main phase of Re{sub 2}Fe{sub 14}B. • The amount of minor phases varies with the content of constituent elements. • The energy product of 12.74 MGOe is obtained in MM{sub 13}Fe{sub 80.5}B{sub 6.5} ribbons by optimizing the phase constitution.

  3. Multimode Preemptive Resource Investment Problem Subject to Due Dates for Activities: Formulation and Solution Procedure

    Directory of Open Access Journals (Sweden)

    Behrouz Afshar-Nadjafi

    2014-01-01

    Full Text Available The preemptive Multimode resource investment problem is investigated. The Objective is to minimize the total renewable/nonrenewable resource costs and earliness-tardiness costs by a given project deadline and due dates for activities. In this problem setting preemption is allowed with no setup cost or time. The project contains activities interrelated by finish-start type precedence relations with a time lag of zero, which require a set of renewable and nonrenewable resources. The problem formed in this way is an NP-hard. A mixed integer programming formulation is proposed for the problem and parameters tuned genetic algorithm (GA is proposed to solve it. To evaluate the performance of the proposed algorithm, 120 test problems are used. Comparative statistical results reveal that the proposed GA is efficient and effective in terms of the objective function and computational times.

  4. Save Energy: Save Money!

    Science.gov (United States)

    Eccli, Eugene; And Others

    This publication is a collection of inexpensive energy saving tips and home improvements for home owners, particularly in low-income areas or in older homes. Section titles are: (1) Keeping Warm; (2) Getting Heat Where You Need It; (3) Using the Sun; (4) Furnaces, Stoves, and Fireplaces; (5) Insulation and Other Energy Needs; (6) Do-It-Yourself…

  5. Potential cost saving of Epoetin alfa in elective hip or knee surgery due to reduction in blood transfusions and their side effects: a discrete-event simulation model.

    Directory of Open Access Journals (Sweden)

    Jörg Tomeczkowski

    Full Text Available OBJECTIVES: Transfusion of allogeneic blood is still common in orthopedic surgery. This analysis evaluates from the perspective of a German hospital the potential cost savings of Epoetin alfa (EPO compared to predonated autologous blood transfusions or to a nobloodconservationstrategy (allogeneic blood transfusion strategyduring elective hip and knee replacement surgery. METHODS: Individual patients (N = 50,000 were simulated based on data from controlled trials, the German DRG institute (InEK and various publications and entered into a stochastic model (Monte-Carlo of three treatment arms: EPO, preoperative autologous donation and nobloodconservationstrategy. All three strategies lead to a different risk for an allogeneic blood transfusion. The model focused on the costs and events of the three different procedures. The costs were obtained from clinical trial databases, the German DRG system, patient records and medical publications: transfusion (allogeneic red blood cells: €320/unit and autologous red blood cells: €250/unit, pneumonia treatment (€5,000, and length of stay (€300/day. Probabilistic sensitivity analyses were performed to determine which factors had an influence on the model's clinical and cost outcomes. RESULTS: At acquisition costs of €200/40,000 IU EPO is cost saving compared to autologous blood donation, and cost-effective compared to a nobloodconservationstrategy. The results were most sensitive to the cost of EPO, blood units and hospital days. CONCLUSIONS: EPO might become an attractive blood conservation strategy for anemic patients at reasonable costs due to the reduction in allogeneic blood transfusions, in the modeled incidence of transfusion-associated pneumonia andthe prolongedlength of stay.

  6. Potential cost saving of Epoetin alfa in elective hip or knee surgery due to reduction in blood transfusions and their side effects: a discrete-event simulation model.

    Science.gov (United States)

    Tomeczkowski, Jörg; Stern, Sean; Müller, Alfred; von Heymann, Christian

    2013-01-01

    Transfusion of allogeneic blood is still common in orthopedic surgery. This analysis evaluates from the perspective of a German hospital the potential cost savings of Epoetin alfa (EPO) compared to predonated autologous blood transfusions or to a nobloodconservationstrategy (allogeneic blood transfusion strategy)during elective hip and knee replacement surgery. Individual patients (N = 50,000) were simulated based on data from controlled trials, the German DRG institute (InEK) and various publications and entered into a stochastic model (Monte-Carlo) of three treatment arms: EPO, preoperative autologous donation and nobloodconservationstrategy. All three strategies lead to a different risk for an allogeneic blood transfusion. The model focused on the costs and events of the three different procedures. The costs were obtained from clinical trial databases, the German DRG system, patient records and medical publications: transfusion (allogeneic red blood cells: €320/unit and autologous red blood cells: €250/unit), pneumonia treatment (€5,000), and length of stay (€300/day). Probabilistic sensitivity analyses were performed to determine which factors had an influence on the model's clinical and cost outcomes. At acquisition costs of €200/40,000 IU EPO is cost saving compared to autologous blood donation, and cost-effective compared to a nobloodconservationstrategy. The results were most sensitive to the cost of EPO, blood units and hospital days. EPO might become an attractive blood conservation strategy for anemic patients at reasonable costs due to the reduction in allogeneic blood transfusions, in the modeled incidence of transfusion-associated pneumonia andthe prolongedlength of stay.

  7. Increasing pressure on freshwater resources due to terrestrial feed ingredients for aquaculture production.

    Science.gov (United States)

    Pahlow, M; van Oel, P R; Mekonnen, M M; Hoekstra, A Y

    2015-12-01

    As aquaculture becomes more important for feeding the growing world population, so too do the required natural resources needed to produce aquaculture feed. While there is potential to replace fish meal and fish oil with terrestrial feed ingredients, it is important to understand both the positive and negative implications of such a development. The use of feed with a large proportion of terrestrial feed may reduce the pressure on fisheries to provide feed for fish, but at the same time it may significantly increase the pressure on freshwater resources, due to water consumption and pollution in crop production for aquafeed. Here the green, blue and gray water footprint of cultured fish and crustaceans related to the production of commercial feed for the year 2008 has been determined for the major farmed species, representing 88% of total fed production. The green, blue and gray production-weighted average feed water footprints of fish and crustaceans fed commercial aquafeed are estimated at 1629 m3/t, 179 m3/t and 166 m3/t, respectively. The estimated global total water footprint of commercial aquafeed was 31-35 km3 in 2008. The top five contributors to the total water footprint of commercial feed are Nile tilapia, Grass carp, Whiteleg shrimp, Common carp and Atlantic salmon, which together have a water footprint of 18.2 km3. An analysis of alternative diets revealed that the replacement of fish meal and fish oil with terrestrial feed ingredients may further increase pressure on freshwater resources. At the same time economic consumptive water productivity may be reduced, especially for carnivorous species. The results of the present study show that, for the aquaculture sector to grow sustainably, freshwater consumption and pollution due to aquafeed need to be taken into account. Copyright © 2015. Published by Elsevier B.V.

  8. Lost water and nitrogen resources due to EU consumer food waste

    Science.gov (United States)

    Vanham, D.; Bouraoui, F.; Leip, A.; Grizzetti, B.; Bidoglio, G.

    2015-08-01

    The European Parliament recently called for urgent measures to halve food waste in the EU, where consumers are responsible for a major part of total waste along the food supply chain. Due to a lack of data on national food waste statistics, uncertainty in (consumer) waste quantities (and the resulting associated quantities of natural resources) is very high, but has never been previously assessed in studies for the EU. Here we quantify: (1) EU consumer food waste, and (2) associated natural resources required for its production, in term of water and nitrogen, as well as estimating the uncertainty of these values. Total EU consumer food waste averages 123 (min 55-max 190) kg/capita annually (kg/cap/yr), i.e. 16% (min 7-max 24%) of all food reaching consumers. Almost 80%, i.e. 97 (min 45-max 153) kg/cap/yr is avoidable food waste, which is edible food not consumed. We have calculated the water and nitrogen (N) resources associated with avoidable food waste. The associated blue water footprint (WF) (the consumption of surface and groundwater resources) averages 27 litre per capita per day (min 13-max 40 l/cap/d), which slightly exceeds the total blue consumptive EU municipal water use. The associated green WF (consumptive rainwater use) is 294 (min 127-max 449) l/cap/d, equivalent to the total green consumptive water use for crop production in Spain. The nitrogen (N) contained in avoidable food waste averages 0.68 (min 0.29-max 1.08) kg/cap/yr. The food production N footprint (any remaining N used in the food production process) averages 2.74 (min 1.02-max 4.65) kg/cap/yr, equivalent to the use of mineral fertiliser by the UK and Germany combined. Among all the food product groups wasted, meat accounts for the highest amounts of water and N resources, followed by wasted cereals. The results of this study provide essential insights and information on sustainable consumption and resource efficiency for both EU policies and EU consumers.

  9. Saving water through global trade

    NARCIS (Netherlands)

    Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.

    2005-01-01

    Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water

  10. Household Savings

    DEFF Research Database (Denmark)

    Browning, Martin; Lusardi, Annamaria

    suggested in the informal saving literature can be captured in the standard optimizing model. Particular attention is given to recent work on the precautionary motive and its implications for saving and consumption behavior. We also discuss the "behavioral" or "psychological" approach that eschews the use......In this survey, we review the recent theoretical and empirical literature on household saving and consumption. The discussion is structured around a list of motives for saving and how well the standard theory captures these motives. We show that almost all of the motives for saving that have been...

  11. Cost-benefit assessment of energy efficiency investments: Accounting for future resources, savings and risks in the Australian residential sector

    International Nuclear Information System (INIS)

    Morrissey, J.; Meyrick, B.; Sivaraman, D.; Horne, R.E.; Berry, M.

    2013-01-01

    This article focuses on the impact of the discount rate on cost-benefit assessment of investment options for residential building efficiency. An integrated thermal modeling, life cycle costing approach is applied to an extensive sample of dominant house designs for Australian conditions. The relative significance of predicted thermal performance and the applied discount rate on the Present Value of energy savings from alternative investment scenarios is investigated. Costs and benefits are also evaluated at the economy-wide scale, including carbon pricing considerations, and for a test-case household faced with alternative investment options at the point of construction. The influence of the applied discount rate on produced cost-benefit calculations is investigated, as is the interaction between critical cost-benefit input parameters. Findings support that the discounting framework is the primary driver of difference in estimates about costs and benefits of higher standards of efficiency in the residential sector. Results demonstrate that agreement on a low discount rate based on sustainability principals would prioritise those projects with significant environmental benefits. - Highlights: ► High thermal efficiency is a key strategy to limit energy use in buildings. ► Integrated thermal modeling—life-cycle costing methods are applied to dominant house designs. ► The discounting framework is the primary driver of difference in observed costs. ► The selection of optimal performance investment options depends on the discount rate. ► Application of a discount rate of 3.5% or lower favours energy saving projects

  12. Energy and Resource Saving of Steelmaking Process: Utilization of Innovative Multi-phase Flux During Dephosphorization Process

    Science.gov (United States)

    Matsuura, Hiroyuki; Hamano, Tasuku; Zhong, Ming; Gao, Xu; Yang, Xiao; Tsukihashi, Fumitaka

    2014-09-01

    An increase in the utilization efficiency of CaO, one of the major fluxing agents used in various steelmaking processes, is required to reduce the amount of discharged slag and energy consumption of the process. The authors have intensively focused on the development of innovative dephosphorization process by using so called "multi-phase flux" composed of solid and liquid phases. This article summarizes the research on the above topic done by the authors, in which the formation mechanisms of P2O5-containing phase during CaO or 2CaO·SiO2 dissolution into molten slag, the phase relationship between solid and liquid phases at equilibrium, and thermodynamic properties of P2O5-containing phase have been clarified. The reactions between solid CaO or 2CaO·SiO2 and molten CaO-FeO x -SiO2-P2O5 slag were observed by dipping solid specimen in the synthesized slag at 1573 K or 1673 K. The formation of the CaO-FeO layer and dual-phase layer of solid 2CaO·SiO2 and FeO x -rich liquid phase was observed around the interface from the solid CaO side toward the bulk slag phase side. Condensation of P2O5 into 2CaO·SiO2 phase as 2CaO·SiO2-3CaO·P2O5 solid solution was observed in both cases of CaO and 2CaO·SiO2 as solid specimens. Measurement of the phase relationship for the CaO-FeO x -SiO2-P2O5 system confirmed the condensation of P2O5 in solid phase at low oxygen partial pressure. The thermodynamics of 2CaO·SiO2-3CaO·P2O5 solid solution are to be clarified to quantitatively simulate the dephosphorization process, and the current results are also introduced. Based on the above results, the reduction of CaO consumption, the discharged slag curtailment, and energy-saving effects have been discussed.

  13. Measuring industrial energy savings

    International Nuclear Information System (INIS)

    Kelly Kissock, J.; Eger, Carl

    2008-01-01

    Accurate measurement of energy savings from industrial energy efficiency projects can reduce uncertainty about the efficacy of the projects, guide the selection of future projects, improve future estimates of expected savings, promote financing of energy efficiency projects through shared-savings agreements, and improve utilization of capital resources. Many efforts to measure industrial energy savings, or simply track progress toward efficiency goals, have had difficulty incorporating changing weather and production, which are frequently major drivers of plant energy use. This paper presents a general method for measuring plant-wide industrial energy savings that takes into account changing weather and production between the pre and post-retrofit periods. In addition, the method can disaggregate savings into components, which provides additional resolution for understanding the effectiveness of individual projects when several projects are implemented together. The method uses multivariable piece-wise regression models to characterize baseline energy use, and disaggregates savings by taking the total derivative of the energy use equation. Although the method incorporates search techniques, multi-variable least-squares regression and calculus, it is easily implemented using data analysis software, and can use readily available temperature, production and utility billing data. This is important, since more complicated methods may be too complex for widespread use. The method is demonstrated using case studies of actual energy assessments. The case studies demonstrate the importance of adjusting for weather and production between the pre- and post-retrofit periods, how plant-wide savings can be disaggregated to evaluate the effectiveness of individual retrofits, how the method can identify the time-dependence of savings, and limitations of engineering models when used to estimate future savings

  14. 30 CFR 206.356 - How do I calculate royalty or fees due on geothermal resources I use for direct use purposes?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I calculate royalty or fees due on... Resources § 206.356 How do I calculate royalty or fees due on geothermal resources I use for direct use... revised fees schedules using the following formulas: ER02MY07.004 Where: RV = Royalty due as a function of...

  15. Electric power saving potential due to domestic refrigerators replacement; Potencial de ahorro de energia electrica por el reemplazo de refrigeradores domesticos

    Energy Technology Data Exchange (ETDEWEB)

    Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de Energia Electrica (Mexico)]. E-mail: jose.peralta@cfe.gob.mx

    2006-04-15

    In Mexico the second most used electrical appliance is: refrigerator. Owing to its use, it would be a promising option for electric power saving. In Guadalajara, Reynosa and Tampico it was performed a study with the aim of launching a project to replace the old refrigerators with new ones which are more effective and less expensive. Since the refrigerators cost and the electrical invoicing saving, the electric appliance change is profitable. To expect with this replacement more than eight million of refrigerators manufactured before 1997 will be changed. [Spanish] El refrigerador es el segundo electrodomestico mas utilizado a nivel nacional, esto permite que debido a su uso sea una opcion prometedora para el ahorro de energia electrica. Se hizo un estudio en Guadalajara, Reynosa y Tampico con el fin de lanzar un proyecto para sustituir los refrigeradores viejos por unos nuevos que sean mas eficaces y menos costosos. Por el costo de los refrigeradores y el ahorro en la facturacion electrica, el cambio de electrodomestico es rentable, de esta manera se espera que los mas de ocho millones de refrigeradores fabricados antes de 1997 que existen en el pais sean cambiados.

  16. Increasing pressure on freshwater resources due to terrestrial feed ingredients for aquaculture production

    NARCIS (Netherlands)

    Pahlow, G.; Oel, van P.R.; Mekonnen, M.M.; Hoekstra, A.Y.

    2015-01-01

    As aquaculture becomes more important for feeding the growing world population, so too do the required natural resources needed to produce aquaculture feed. While there is potential to replace fish meal and fish oil with terrestrial feed ingredients, it is important to understand both the positive

  17. Research of natural resources saving by design studies of Pressurized Light Water Reactors and High Conversion PWR cores with mixed oxide fuels composed of thorium/uranium/plutonium

    International Nuclear Information System (INIS)

    Vallet, V.

    2012-01-01

    Within the framework of innovative neutronic conception of Pressurized Light Water Reactors (PWR) of 3. generation, saving of natural resources is of paramount importance for sustainable nuclear energy production. This study consists in the one hand to design high Conversion Reactors exploiting mixed oxide fuels composed of thorium/uranium/plutonium, and in the other hand, to elaborate multi-recycling strategies of both plutonium and 233 U, in order to maximize natural resources economy. This study has two main objectives: first the design of High Conversion PWR (HCPWR) with mixed oxide fuels composed of thorium/uranium/plutonium, and secondly the setting up of multi-recycling strategies of both plutonium and 233 U, to better natural resources economy. The approach took place in four stages. Two ways of introducing thorium into PWR have been identified: the first is with low moderator to fuel volume ratios (MR) and ThPuO 2 fuel, and the second is with standard or high MR and ThUO 2 fuel. The first way led to the design of under-moderated HCPWR following the criteria of high 233 U production and low plutonium consumption. This second step came up with two specific concepts, from which multi-recycling strategies have been elaborated. The exclusive production and recycling of 233 U inside HCPWR limits the annual economy of natural uranium to approximately 30%. It was brought to light that the strong need in plutonium in the HCPWR dedicated to 233 U production is the limiting factor. That is why it was eventually proposed to study how the production of 233 U within PWR (with standard MR), from 2020. It was shown that the anticipated production of 233 U in dedicated PWR relaxes the constraint on plutonium inventories and favours the transition toward a symbiotic reactor fleet composed of both PWR and HCPWR loaded with thorium fuel. This strategy is more adapted and leads to an annual economy of natural uranium of about 65%. (author) [fr

  18. Resource Constrained Project Scheduling Subject to Due Dates: Preemption Permitted with Penalty

    Directory of Open Access Journals (Sweden)

    Behrouz Afshar-Nadjafi

    2014-01-01

    Full Text Available Extensive research works have been carried out in resource constrained project scheduling problem. However, scarce researches have studied the problems in which a setup cost must be incurred if activities are preempted. In this research, we investigate the resource constrained project scheduling problem to minimize the total project cost, considering earliness-tardiness and preemption penalties. A mixed integer programming formulation is proposed for the problem. The resulting problem is NP-hard. So, we try to obtain a satisfying solution using simulated annealing (SA algorithm. The efficiency of the proposed algorithm is tested based on 150 randomly produced examples. Statistical comparison in terms of the computational times and objective function indicates that the proposed algorithm is efficient and effective.

  19. Selection of population controls for a Salmonella case-control study in the UK using a market research panel and web-survey provides time and resource savings.

    Science.gov (United States)

    Mook, P; Kanagarajah, S; Maguire, H; Adak, G K; Dabrera, G; Waldram, A; Freeman, R; Charlett, A; Oliver, I

    2016-04-01

    Timely recruitment of population controls in infectious disease outbreak investigations is challenging. We evaluated the timeliness and cost of using a market research panel as a sampling frame for recruiting controls in a case-control study during an outbreak of Salmonella Mikawasima in the UK in 2013. We deployed a web-survey by email to targeted members of a market research panel (panel controls) in parallel to the outbreak control team interviewing randomly selected public health staff by telephone and completing paper-based questionnaires (staff controls). Recruitment and completion of exposure history web-surveys for panel controls (n = 123) took 14 h compared to 15 days for staff controls (n = 82). The average staff-time cost per questionnaire for staff controls was £13·13 compared to an invoiced cost of £3·60 per panel control. Differences in the distribution of some exposures existed between these control groups but case-control studies using each group found that illness was associated with consumption of chicken outside of the home and chicken from local butchers. Recruiting market research panel controls offers time and resource savings. More rapid investigations would enable more prompt implementation of control measures. We recommend that this method of recruiting controls is considered in future investigations and assessed further to better understand strengths and limitations.

  20. Electronic tracking of human resource skills and knowledge, just in time training, manageable due diligence

    Energy Technology Data Exchange (ETDEWEB)

    Kolodziej, M.A. [Quick Test International Inc., (Canada). Canadian Technology Human Resource Board; Baker, O. [KeySpan Energy Canada, Calgary, AB (Canada)

    2001-06-01

    KeySpan Energy Canada is in the process of obtaining recognition of various occupational profiles including pipeline operators, inspectors, and field and plant operators from various certifying organizations. The process of allowing individuals to obtain certification is recognized by Canadian Technology Human Resources Board as a step towards national standards for technologists and technicians. Proven competency is a must for workers in todays oil industry in response to increasingly stringent government safety regulations, environmental concerns and high public scrutiny. Quick Test international Inc. has developed a management tool in collaboration with end users at KeySpan Energy Canada. It is an electronic, Internet based competency tool for tracking personal competencies and maintaining continued competency. Response to the tool has been favourable. 2 refs., 4 figs.

  1. Save energy - for industry

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    The article is an interview with Glenn Bjorklund, Vice President of SCalEd (Southern California Edison). The variations in Californian power demand and public electricity consumption habits are explained, together with types of power source used in electricity production. Questions are posed concerning SCalEd's energy saving strategy. The political implications of electricity charge changes are discussed. The planned energy resources for 1982-1992 are given with nuclear power being the largest contributor. (H.J.P./G.T.H.)

  2. Energy Savings in a Market Economy

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1998-01-01

    The paper outlines the concept of energy savings as opposed to energy efficency. Afterwards are described briefly the up and down role of energy savings in recent Danish energy policy. It discusses the failure of leaving electricity savings and Integrated Resource Planning to the electricity...

  3. Saving Earth

    NARCIS (Netherlands)

    Zwier, J.; Blok, V.

    2017-01-01

    In this paper, we argue that the Anthropocene is relevant for philosophy of technology because it makes us sensitive to the ontological dimension of contemporary technology. In §1, we show how the Anthropocene has ontological status insofar as the Anthropocenic world appears as managerial resource

  4. Saving Water Means Saving Life

    Institute of Scientific and Technical Information of China (English)

    韩文盛

    2005-01-01

    On the""""""""World Water Day"""""""" (March 22, 2005) the United Nations began an """"""""International Decade for Action: Water for Life"""""""" to focus the world's attention on water resources. """"""""Water is essential for life"""""""", said the UN Secretary-General, Kofi Annanin, in an address prepared for the ceremony. """"""""This is an urgent matter of human development and human dignity."""""""" Is this matter so important to the Chinese people? What can be done to help solve the water resources problem in China? Please write down your views in a composition in no less than 200 words.

  5. Savings Behavior and Satisfaction with Savings: A Comparison of Low- and High-Income Groups.

    Science.gov (United States)

    Davis, Elizabeth P.; Schumm, Walter R.

    1987-01-01

    Data on 1,739 married couples from 13 states were analyzed. Associations between satisfaction with savings and level of savings with measures of motivation to save, motivations to spend, and family resources were found to differ substantially between low- and high-income couples. (Author/CH)

  6. Saving Face and Group Identity

    DEFF Research Database (Denmark)

    Eriksson, Tor; Mao, Lei; Villeval, Marie-Claire

    2015-01-01

    their self- but also other group members' image. This behavior is frequent even in the absence of group identity. When group identity is more salient, individuals help regardless of whether the least performer is an in-group or an out-group. This suggests that saving others' face is a strong social norm.......Are people willing to sacrifice resources to save one's and others' face? In a laboratory experiment, we study whether individuals forego resources to avoid the public exposure of the least performer in their group. We show that a majority of individuals are willing to pay to preserve not only...

  7. Water Saving for Development

    Science.gov (United States)

    Zacharias, Ierotheos

    2013-04-01

    The project "Water Saving for Development (WaS4D)" is financed by European Territorial Cooperational Programme, Greece-Italy 2007-2013, and aims at developing issues on water saving related to improvement of individual behaviors and implementing innovative actions and facilities in order to harmonize policies and start concrete actions for a sustainable water management, making also people and stakeholders awake to water as a vital resource, strategic for quality of life and territory competitiveness. Drinkable water saving culture & behavior, limited water resources, water supply optimization, water resources and demand management, water e-service & educational e-tools are the key words of WaS4D. In this frame the project objectives are: • Definition of water need for domestic and other than domestic purposes: regional and territorial hydro-balance; • promotion of locally available resources not currently being used - water recycling or reuse and rainwater harvesting; • scientific data implementation into Informative Territorial System and publication of geo-referred maps into the institutional web sites, to share information for water protection; • participated review of the regulatory framework for the promotion of water-efficient devices and practices by means of the definition of Action Plans, with defined targets up to brief (2015) and medium (2020) term; • building up water e-services, front-office for all the water issues in building agricultural, industrial and touristic sectors, to share information, procedures and instruments for the water management; • creation and publication of a user friendly software, a game, to promote sustainability for houses also addressed to young people; • creation of water info point into physical spaces called "Water House" to promote education, training, events and new advisory services to assist professionals involved in water uses and consumers; • implementation of participatory approach & networking for a

  8. Net savings

    International Nuclear Information System (INIS)

    Roche, P.

    2001-01-01

    The state of e-commerce in the Canadian upstream oil and natural gas sector is examined in an effort to discover the extent to which the .com economy has penetrated the marketplace. The overall assessment is that although the situation varies from producer to producer and process to process, a bustling digital marketplace in the Canadian oil business has yet to emerge. Nevertheless, there are several examples of companies using e-business tools to minimize technology staffing and to eliminate wasteful practices. Initiatives cited include streamlining of supply chains to cut handling costs, using application service providers to trim information technology budgets, and adopting electronic joint interest billing to save on printing, postage and re-entering data. Most notable efforts have been made by companies such as BXL Energy Limited and Genesis Exploration Limited, both of which are boosting efficiency on the inside by contracting out data storage and software applications. For example, BXL has replaced its microfilm log library occupying six cabinets, and totalling about 9,000 lbs., by a fibre optic line. All applications can now be run from a laptop which weighs three to four pounds. In a similar vein, Genesis Exploration started using application service providers (ASPs) to avoid the cost and hassle of buying and maintaining major software applications in-house. By accessing the ASPs, Genesis staff can run software without buying or installing it on their own computers. In yet another example of cutting information technology costs, Pengrowth Corporation has its network administration done remotely over the Internet by Northwest Digital Systems (NWD). As far as the industry at large is concerned, the answer appears to be in a digital marketplace specifically tailored to the upstream sector's unique profile. As a start, a study is underway by Deloitte Consulting to explore producer interest in joining or founding an upstream digital marketplace. The study was

  9. Net savings

    Energy Technology Data Exchange (ETDEWEB)

    Roche, P.

    2001-02-01

    The state of e-commerce in the Canadian upstream oil and natural gas sector is examined in an effort to discover the extent to which the .com economy has penetrated the marketplace. The overall assessment is that although the situation varies from producer to producer and process to process, a bustling digital marketplace in the Canadian oil business has yet to emerge. Nevertheless, there are several examples of companies using e-business tools to minimize technology staffing and to eliminate wasteful practices. Initiatives cited include streamlining of supply chains to cut handling costs, using application service providers to trim information technology budgets, and adopting electronic joint interest billing to save on printing, postage and re-entering data. Most notable efforts have been made by companies such as BXL Energy Limited and Genesis Exploration Limited, both of which are boosting efficiency on the inside by contracting out data storage and software applications. For example, BXL has replaced its microfilm log library occupying six cabinets, and totalling about 9,000 lbs., by a fibre optic line. All applications can now be run from a laptop which weighs three to four pounds. In a similar vein, Genesis Exploration started using application service providers (ASPs) to avoid the cost and hassle of buying and maintaining major software applications in-house. By accessing the ASPs, Genesis staff can run software without buying or installing it on their own computers. In yet another example of cutting information technology costs, Pengrowth Corporation has its network administration done remotely over the Internet by Northwest Digital Systems (NWD). As far as the industry at large is concerned, the answer appears to be in a digital marketplace specifically tailored to the upstream sector's unique profile. As a start, a study is underway by Deloitte Consulting to explore producer interest in joining or founding an upstream digital marketplace. The study

  10. Using the Lives Saved Tool (LiST) to Model mHealth Impact on Neonatal Survival in Resource-Limited Settings

    Science.gov (United States)

    Jo, Youngji; Labrique, Alain B.; Lefevre, Amnesty E.; Mehl, Garrett; Pfaff, Teresa; Walker, Neff; Friberg, Ingrid K.

    2014-01-01

    While the importance of mHealth scale-up has been broadly emphasized in the mHealth community, it is necessary to guide scale up efforts and investment in ways to help achieve the mortality reduction targets set by global calls to action such as the Millennium Development Goals, not merely to expand programs. We used the Lives Saved Tool (LiST)–an evidence-based modeling software–to identify priority areas for maternal and neonatal health services, by formulating six individual and combined interventions scenarios for two countries, Bangladesh and Uganda. Our findings show that skilled birth attendance and increased facility delivery as targets for mHealth strategies are likely to provide the biggest mortality impact relative to other intervention scenarios. Although further validation of this model is desirable, tools such as LiST can help us leverage the benefit of mHealth by articulating the most appropriate delivery points in the continuum of care to save lives. PMID:25014008

  11. Using the lives saved tool (LiST to model mHealth impact on neonatal survival in resource-limited settings.

    Directory of Open Access Journals (Sweden)

    Youngji Jo

    Full Text Available While the importance of mHealth scale-up has been broadly emphasized in the mHealth community, it is necessary to guide scale up efforts and investment in ways to help achieve the mortality reduction targets set by global calls to action such as the Millennium Development Goals, not merely to expand programs. We used the Lives Saved Tool (LiST--an evidence-based modeling software--to identify priority areas for maternal and neonatal health services, by formulating six individual and combined interventions scenarios for two countries, Bangladesh and Uganda. Our findings show that skilled birth attendance and increased facility delivery as targets for mHealth strategies are likely to provide the biggest mortality impact relative to other intervention scenarios. Although further validation of this model is desirable, tools such as LiST can help us leverage the benefit of mHealth by articulating the most appropriate delivery points in the continuum of care to save lives.

  12. Saving lives, money and resources: drug and CABG/PCI use after myocardial infarction in a Swedish record-linkage study.

    Science.gov (United States)

    Wilhelmsen, Lars; Welin, Lennart; Odén, Anders; Björnberg, Arne

    2010-04-01

    Drug costs are increasing despite the introduction of cheaper generic drugs. The aim of the present study was to analyse the entire costs of hospital care, out-patient care, and the cost of drugs for 16 months following a myocardial infarction (MI) to see to what extent drug costs contribute to the overall costs of care. Diagnoses and costs for care as well as mortality data obtained from the Västra Götaland Region, Sweden, and drug costs from the Swedish Board of Health and Welfare, were merged in a computer file. Patients registered from 1 July 2005 to 30 June 2006 were followed from 28 days after an MI, with follow-up until 31 October 2006. Of 4,725 patients, 711 died before the start of the study and 721 during follow-up. Higher age [hazard ratio (HR, 95%CI) = 1.06 (1.05-1.07)], previous MI [HR = 1.31 (1.13-1.53)] and diabetes mellitus [HR = 1.34 (1.13-1.58)] were associated with increased mortality, which decreased with coronary interventions: CABG/PCI [HR = 0.19 (0.14-0.27)]. In a multivariable analysis, mortality was lower for patients taking simvastatin [HR = 0.62 (0.50-0.76)] and clopidogrel [HR = 0.58 (0.46-0.74)]. Costs for out-patient care accounted for 25% and drugs for 5% of total costs. If patients not treated with simvastatin or clopidogrel had received these drugs, an additional 154-306 lives might have been saved. Drug costs would be higher, but total costs lower. Thus, even expensive drugs may reduce overall costs.

  13. Children who face development risks due to maternal addiction during pregnancy require extra medical and psychosocial resources.

    Science.gov (United States)

    Rangmar, Jenny; Lilja, Maria; Köhler, Marie; Reuter, Antonia

    2018-05-21

    This study examined medical and psychosocial risk factors in children born to women with addiction problems during pregnancy and the children's needs for extra medical and psychosocial resources. Swedish midwives routinely screen pregnant women for drugs and alcohol and refer women with addictions to the Maternity and Child Healthcare Resource Team. We investigated the medical records of 127 children (51% girls) whose mothers were referred to the Resource Team from 2009-2015. Additional data were obtained from local child healthcare services (CHS), which provide routine paediatric care. More than three-quarters (76%) of the children had prenatal exposure to alcohol and drugs and 17% were born with withdrawal symptoms. The mothers had a high rate of psychiatric diagnoses (38%) and were more likely to smoke after delivery and less likely to breastfeed than the general population. However, adherence to the CHS programme was generally high. Additional visits to the nurse, referrals to specialists, collaboration meetings and reports of concerns to social services decreased when the children began attending ordinary CHS centres. Children born to women with addictions during pregnancy faced a high risk of developmental problems and should be offered additional CHS resources to minimise negative long-term consequences. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  14. Smart management of sample dilution using an artificial neural network to achieve streamlined processes and saving resources: the automated nephelometric testing of serum free light chain as case study.

    Science.gov (United States)

    Ialongo, Cristiano; Pieri, Massimo; Bernardini, Sergio

    2017-02-01

    Saving resources is a paramount issue for the modern laboratory, and new trainable as well as smart technologies can be used to allow the automated instrumentation to manage samples more efficiently in order to achieve streamlined processes. In this regard the serum free light chain (sFLC) testing represents an interesting challenge, as it usually causes using a number of assays before achieving an acceptable result within the analytical range. An artificial neural network based on the multi-layer perceptron (MLP-ANN) was used to infer the starting dilution status of sFLC samples based on the information available through the laboratory information system (LIS). After the learning phase, the MLP-ANN simulation was applied to the nephelometric testing routinely performed in our laboratory on a BN ProSpec® System analyzer (Siemens Helathcare) using the N Latex FLC kit. The MLP-ANN reduced the serum kappa free light chain (κ-FLC) and serum lambda free light chain (λ-FLC) wasted tests by 69.4% and 70.8% with respect to the naïve stepwise dilution scheme used by the automated analyzer, and by 64.9% and 66.9% compared to a "rational" dilution scheme based on a 4-step dilution. Although it was restricted to follow-up samples, the MLP-ANN showed good predictive performance, which alongside the possibility to implement it in any automated system, made it a suitable solution for achieving streamlined laboratory processes and saving resources.

  15. Water Saving Strategies & Ecological Modernisation

    DEFF Research Database (Denmark)

    Hoffmann, Birgitte; Jensen, Jesper Ole; Elle, Morten

    2005-01-01

    Drawing on case studies of water saving campaigns and new collaborations, the pa-per will serve, on the one hand, as an interpretation of the water saving strategy in Co-penhagen in the light of Ecological Modernisation, and on the other hand, as a critical discussion of Ecological Modernisation...... as a frame for understanding resource manage-ment. The water management in Copenhagen has in recent years undergone a rather radi-cal transition. Along with strong drivers for resource management in the region the mu-nicipal water supplier has tested and implemented a number of initiatives to promote sus...... to 125 l/capita/day in 2002. A series of different strategies, targets and tools have been implemented: Emphasizing demand side instead of supply side, using and communicating indicators, formulating goals for reducing water consumption and developing learning processes in water management. A main...

  16. A contribution to massively transformed components of gears for the reduction of consumption and resources saving; Beitrag massivumgeformter Getriebekomponenten zur Verbrauchsreduzierung und Ressourcenschonung

    Energy Technology Data Exchange (ETDEWEB)

    Quintenz, Gisela; Raedt, Hans-Willi [Hirschvogel Umformtechnik, Denklingen (Germany)

    2009-07-01

    The Hirschvogel Automotive Group provides their longtime experience to all customers worldwide and offers assistance from the first design concept up to assembly-ready components in large-batch production. Besides the common strategic topics as high volumes and complex products, the constant development of the international networking within the group is of special importance. Ultimately the objective is to stand out due to quality and reliability on international level and to supply customers worldwide with innovative excellent products. (orig.)

  17. Invasive Acer negundo outperforms native species in non-limiting resource environments due to its higher phenotypic plasticity.

    Science.gov (United States)

    Porté, Annabel J; Lamarque, Laurent J; Lortie, Christopher J; Michalet, Richard; Delzon, Sylvain

    2011-11-24

    To identify the determinants of invasiveness, comparisons of traits of invasive and native species are commonly performed. Invasiveness is generally linked to higher values of reproductive, physiological and growth-related traits of the invasives relative to the natives in the introduced range. Phenotypic plasticity of these traits has also been cited to increase the success of invasive species but has been little studied in invasive tree species. In a greenhouse experiment, we compared ecophysiological traits between an invasive species to Europe, Acer negundo, and early- and late-successional co-occurring native species, under different light, nutrient availability and disturbance regimes. We also compared species of the same species groups in situ, in riparian forests. Under non-limiting resources, A. negundo seedlings showed higher growth rates than the native species. However, A. negundo displayed equivalent or lower photosynthetic capacities and nitrogen content per unit leaf area compared to the native species; these findings were observed both on the seedlings in the greenhouse experiment and on adult trees in situ. These physiological traits were mostly conservative along the different light, nutrient and disturbance environments. Overall, under non-limiting light and nutrient conditions, specific leaf area and total leaf area of A. negundo were substantially larger. The invasive species presented a higher plasticity in allocation to foliage and therefore in growth with increasing nutrient and light availability relative to the native species. The higher level of plasticity of the invasive species in foliage allocation in response to light and nutrient availability induced a better growth in non-limiting resource environments. These results give us more elements on the invasiveness of A. negundo and suggest that such behaviour could explain the ability of A. negundo to outperform native tree species, contributes to its spread in European resource

  18. Canada Education Savings Program: Annual Statistical Review--2009

    Science.gov (United States)

    Human Resources and Skills Development Canada, 2009

    2009-01-01

    The Canada Education Savings Program is an initiative of the Government of Canada. As part of the Department of Human Resources and Skills Development, the program administers the Canada Education Savings Grant and the Canada Learning Bond. These two initiatives help Canadian families save for a child's post-secondary education in Registered…

  19. Canada Education Savings Program: Annual Statistical Review 2011

    Science.gov (United States)

    Human Resources and Skills Development Canada, 2011

    2011-01-01

    The Canada Education Savings Program has been an initiative of the Government of Canada since 1998. As part of the Department of Human Resources and Skills Development, the program administers the Canada Education Savings Grant and the Canada Learning Bond. These two initiatives help Canadian families save for a child's post-secondary education in…

  20. Canada Education Savings Program: Annual Statistical Review 2012

    Science.gov (United States)

    Human Resources and Skills Development Canada, 2012

    2012-01-01

    The Canada Education Savings Program (CESP) has been an initiative of the Government of Canada since 1998. As part of the Department of Human Resources and Skills Development Canada, the program administers the Canada Education Savings Grant (CESG) and the Canada Learning Bond (CLB). These two initiatives help Canadian families save for a child's…

  1. Water saving through international trade of agricultural products

    NARCIS (Netherlands)

    Chapagain, Ashok; Hoekstra, Arjen Ysbert; Savenije, H.H.G.

    2006-01-01

    Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water

  2. Feeding your piggy bank with intentions : A study on saving behaviour, saving strategies, and happiness

    NARCIS (Netherlands)

    De Francisco Vela, S.; Desmet, P.M.A.; Casais, M.

    2014-01-01

    The act of saving money can connect one’s present state to a meaningful future state, especially if we consider money not as a direct source of happiness, but as a resource for engaging in meaningful activities. To explore how design can contribute to making the act of saving more meaningful, we

  3. Private Sector Savings

    Directory of Open Access Journals (Sweden)

    Pitonáková Renáta

    2018-03-01

    Full Text Available The majority of household savings are in the form of bank deposits. It is therefore of interest for credit institutions to tailor their deposit policy for getting finances from non-banking entities and to provide the private sector with the loans that are necessary for investment activities and consumption. This paper deals with the determinants of the saving rate of the private sector of Slovakia. Economic, financial and demographic variables influence savings. Growth of income per capita, private disposable income, elderly dependency ratio, real interest rate and inflation have a positive impact on savings, while increases in public savings indicate a crowding out effect. The inflation rate implies precautionary savings, and dependency ratio savings for bequest. There are also implications for governing institutions deciding on the implementation of appropriate fiscal and monetary operations.

  4. Optimal Due Date Assignment and Resource Allocation to Minimize the Weighted Number of Tardy Jobs on a Single Machine

    OpenAIRE

    Dvir Shabtay; George Steiner

    2007-01-01

    With the increased emphasis on the effective management of operational issues in supply chains, the timely delivery of products has become even more important. Companies have to quote attainable delivery dates and then meet these, or face large tardiness penalties. We study systems that can be modeled by single-machine scheduling problems with due date assignment and controllable job-processing times, which are either linear or convex functions of the amount of a continuously divisible and no...

  5. Energy savings in Danish residential building stock

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2006-01-01

    a short account of the technical energy-saving possibilities that are present in existing dwellings and presents a financial methodology used for assessing energy-saving measures. In order to estimate the total savings potential detailed calculations have been performed in a case with two typical...... buildings representing the residential building stock and based on these calculations an assessment of the energy-saving potential is performed. A profitable savings potential of energy used for space heating of about 80% is identified over 45 years (until 2050) within the residential building stock......A large potential for energy savings exists in the Danish residential building stock due to the fact that 75% of the buildings were constructed before 1979 when the first important demands for energy performance of building were introduced. It is also a fact that many buildings in Denmark face...

  6. Individual savings accounts for social insurance

    DEFF Research Database (Denmark)

    Bovenberg, Lans; Hansen, Martin Ino; Sørensen, Peter Birch

    2008-01-01

    Using Danish data, we find that about three-fourths of the taxes levied to finance public transfers actually finance benefits that redistribute income over the life cycle of individual taxpayers rather than redistribute resources across people. This finding and similar results for other countries...... provide a rationale for financing part of social insurance via mandatory individual savings accounts. We discuss the advantages and disadvantages of mandatory individual savings accounts for social insurance and survey some recent alternative proposals for such accounts...

  7. Energy saving certificates

    International Nuclear Information System (INIS)

    2005-11-01

    The French ministry of economy, finances and industry and the French agency of environment and energy mastery (Ademe) have organized on November 8, 2005, a colloquium for the presentation of the energy saving certificates, a new tool to oblige the energy suppliers to encourage their clients to make energy savings. This document gathers the transparencies presented at this colloquium about the following topics: state-of-the-art and presentation of the energy saving certificates system: presentation of the EEC system, presentation of the EEC standard operations; the energy saving certificates in Europe today: energy efficiency commitment in UK, Italian white certificate scheme, perspectives of the different European systems. (J.S.)

  8. Spending to save

    DEFF Research Database (Denmark)

    Larsen, Anders

    2013-01-01

    the energy distribution companies meet their overall saving obligation, the net savings impact are about a third of the savings reported by the obligated parties. Further it was found that while energy savings in the public and business sector have a high net impact, some subsidies given under the EEO...... perspective. The evaluation has resulted in noticeable adjustments of the design of the Danish EEO, e.g. introduction of a 1 year payback-time limit for projects receiving subsidies, a minimum baseline for insulation products, and specification of documentation requirements....

  9. Recycling boosts profits and saves resources

    Energy Technology Data Exchange (ETDEWEB)

    Searle, D

    1980-05-01

    Current government regulations in the United Kingdom designed to protect the environment are discussed with regard to commercial wastes. It is pointed out that increasing cost and scarcity of raw materials, coupled with the stringent anti-dumping regulations, has made the recycling of waste economically viable. Energy from waste projects are discussed as well as processes for the reclaiming of organic solvents (e.g. point and printing ink manufacturers). Recovery of ammonia, wash solvents, industrial oils and chlorinated solvents are described briefly. The Bioenergy process for the treatment of effluents from brewing, food, and general distilling industry is discussed. Separation of solid from liquid is possible in a few days and a methane-rich fuel gas is obtained. The shredding and rubber recovery from tires is mentioned briefly. (MJJ)

  10. Contract saving schemes

    NARCIS (Netherlands)

    Ronald, R.; Smith, S.J.; Elsinga, M.; Eng, O.S.; Fox O'Mahony, L.; Wachter, S.

    2012-01-01

    Contractual saving schemes for housing are institutionalised savings programmes normally linked to rights to loans for home purchase. They are diverse types as they have been developed differently in each national context, but normally fall into categories of open, closed, compulsory, and ‘free

  11. Casual relationship between gross domestic saving and economic ...

    African Journals Online (AJOL)

    The empirical study confirmed that a significant relationship between domestic savings and ... and, which ultimately increases the country domestic saving level. ... which increase saving and investment into the country due to its dual effect. ... South Africa (96); South Sudan (1); Sudan (3); Swaziland (3); Tanzania (19); Togo ...

  12. Renewable energy for Canada's northern communities - quantifying potential fuel savings

    International Nuclear Information System (INIS)

    Brothers, C.

    1998-01-01

    The probable impact of renewable energy technologies on fuel consumption in Canada's remote northern communities was discussed. These communities currently meet their electricity requirements using expensive diesel powered generators. It was noted that change to renewable energy in Canada's remote communities will only be made if the economic benefits can be clearly demonstrated. A study was conducted in Cambridge Bay, Northwest Territories, in which electrical load requirements and wind and solar resource data from the community was acquired to estimate savings in diesel fuel consumption for various renewable energy technologies. Wind was found to provide the most fuel displacement and was considered to be the most appropriate technology for these communities. A photovoltaic (PV) system of equivalent size would have significantly less impact on fuel savings in a community like Cambridge Bay, in part because a PV system would be poorly correlated on a seasonal basis with the energy requirements of the community. A wind-diesel system would be the most advantageous in terms of fuel savings due to its relatively high capacity factor, and due to the fact that is it is available year around. 4 refs., 1 tab., 4 figs

  13. State Regulation of the Savings Market Within the Context of “New Economy” Imperatives

    Directory of Open Access Journals (Sweden)

    Valeriya Viktorovna Litvin

    2015-12-01

    Full Text Available In the conditions of “new economy” which today is being shaped due to unprecedented progress of science and technology, and information revolution, we observe significant intensification of insecurity and instability risks as well as scaling-up and devastating impact of the downturn. Financial security of many countries and stable functioning of the national savings schemes are under threat which makes impossible expanded reproduction and further social welfare growth. In addition, over the last decades the financial component of crises has gained its role, new financial technologies and assets have become the key reason for the downturn. In this regard, the study of new potential threats of savings market volatility as a savings system core acquires special relevance. Based on the analysis of the main imperfections of savings market under the conditions of new economy, this article defines and analyzes priority directions of the state activity targeted at ensuring sustainability of the national savings system. The author outlines the scope of legal regulation for the savings market, reveals the peculiarities of its monopolization in the conditions of globalization taking into account specifics of this process on the post-industrial stage of civilization development. Manifestations of external effects in savings market have been investigated as well as mechanisms of neutralizing the negative externalities and encouraging positive ones. Both implications of information incomplete character and internalities referring to it have been examined. The methods to increase market savings saturation with information have been considered. The role of state guarantees to ensure sustainability and stability of the national savings systems development has been shown. Performance criteria for institutions in charge to guarantee savings return have been defined. Directions of improving the state system of safeguards have been offered. Mechanism of

  14. Caustic saving potentile in textile processing mills

    International Nuclear Information System (INIS)

    Latif, M.; Rehman, A.; Ghafar, A.; Hafeez, N.M.

    2010-01-01

    The textile processing industry of pakistan has great potential of improvement in resource consumption in various production processes. One major concern is the heavy usage of caustic soda (sodium hydroxide) especially during the mercerization process which incurs a significant cost to a textile processing mill. To reduce the unit fabric production cost and stay competitive, the industry need to minimize the caustic wastage and explore the caustic saving potential. This paper describe the detailed caustic consumption practices and saving potentials in woven textile sector based on the data base of 100 industries. Region wise caustic saving potential is also investigated . Three caustic conservation option including process improvement, reuse and recycling, and caustic recovery plants are discussed. Detailed technical and and financial requirements. saving potentials and paybacks of these options are provided. (author)

  15. Energy Savings from Industrial Water Reductions

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Prakash; McKane, Aimee; de Fontaine, Andre

    2015-08-03

    Although it is widely recognized that reducing freshwater consumption is of critical importance, generating interest in industrial water reduction programs can be hindered for a variety of reasons. These include the low cost of water, greater focus on water use in other sectors such as the agriculture and residential sectors, high levels of unbilled and/or unregulated self-supplied water use in industry, and lack of water metering and tracking capabilities at industrial facilities. However, there are many additional components to the resource savings associated with reducing site water use beyond the water savings alone, such as reductions in energy consumption, greenhouse gas emissions, treatment chemicals, and impact on the local watershed. Understanding and quantifying these additional resource savings can expand the community of businesses, NGOs, government agencies, and researchers with a vested interest in water reduction. This paper will develop a methodology for evaluating the embedded energy consumption associated with water use at an industrial facility. The methodology developed will use available data and references to evaluate the energy consumption associated with water supply and wastewater treatment outside of a facility’s fence line for various water sources. It will also include a framework for evaluating the energy consumption associated with water use within a facility’s fence line. The methodology will develop a more complete picture of the total resource savings associated with water reduction efforts and allow industrial water reduction programs to assess the energy and CO2 savings associated with their efforts.

  16. Invisible costs, visible savings.

    Science.gov (United States)

    Lefever, G

    1999-08-01

    By identifying hidden inventory costs, nurse managers can save money for the organization. Some measures include tracking and standardizing supplies, accurately evaluating patients' needs, and making informed purchasing decisions.

  17. Realized Cost Savings 2016

    Data.gov (United States)

    Department of Veterans Affairs — This dataset is provided as a requirement of OMB’s Integrated Data Collection (IDC) and links to VA’s Realized Cost Savings and Avoidances data in JSON format. Cost...

  18. Energy saving and cost saving cooling; Energie und Kosten sparende Kuehlung

    Energy Technology Data Exchange (ETDEWEB)

    Koenig, Klaus W. [Architektur- und Fachpressebuero Klaus W. Koenig, Ueberlingen (Germany)

    2012-07-01

    In the case of cost reduction, energy conservation and resource savings, rain water is an ideal medium offering more advantages in comparison to the cooling with drinking water. There are no fees for the drinking water and drainage of rain water. It is not necessary to soften rain water so that further operational costs for the treatment and drainage of waste water can be saved. The avoidance of the related material flows and necessary energy is a practiced environmental protection and climate protection.

  19. Charter School Spending and Saving in California

    Science.gov (United States)

    Reed, Sherrie; Rose, Heather

    2015-01-01

    Examining resource allocation practices, including savings, of charter schools is critical to understanding their financial viability and sustainability. Using 9 years of finance data from California, we find charter schools spend less on instruction and pupil support services than traditional public schools. The lower spending on instruction and…

  20. Do You Automate? Saving Time and Dollars

    Science.gov (United States)

    Carmichael, Christine H.

    2010-01-01

    An automated workforce management strategy can help schools save jobs, improve the job satisfaction of teachers and staff, and free up precious budget dollars for investments in critical learning resources. Automated workforce management systems can help schools control labor costs, minimize compliance risk, and improve employee satisfaction.…

  1. Energy Saving and Efficient Energy Use By Power Electronic Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Wang, Huai; Davari, Pooya

    2017-01-01

    In the development of the modern society, one of the key factors is to save energy in order to become more independent of other energy resources. Two important approaches can be taken—one is to change behavior and thereby save energy—the second one is to develop new technology which is able to sa...

  2. Sign Up for Savings.

    Science.gov (United States)

    Kennedy, Mike

    2002-01-01

    Discusses performance service contracts between educational facilities and energy services companies, in which the company provides the money for energy-efficiency improvements and the school pays the company an annual fee. The company guarantees the savings will meet or exceed the fee. (EV)

  3. Saving Malta's music memory

    OpenAIRE

    Sant, Toni

    2013-01-01

    Maltese music is being lost. Along with it Malta loses its culture, way of life, and memories. Dr Toni Sant is trying to change this trend through the Malta Music Memory Project (M3P) http://www.um.edu.mt/think/saving-maltas-music-memory-2/

  4. Gun control saves lives

    African Journals Online (AJOL)

    gun control legislation. One study estimated that more than 4 500 lives were saved across five SA cities from 2001 to 2005.[5] Pro-gun interest groups seeking to promote gun ownership and diffusion have attacked these findings, suggesting that stricter gun control was only enacted in 2004 following the publication of ...

  5. 150 years of land degradation and development: loss of habitats, natural resources due to quarrying and industrialization followed by land reclamation in the heart of Budapest city

    Science.gov (United States)

    Török, Ákos

    2017-04-01

    The urban development and land degradation is an accelerated process in the 21st century; however several examples are known when this happened in the past. A historic case study is discussed in this research when clump of three former small towns (named: Buda, Pest and Óbuda) became a million population city more than hundred years ago invoking significant land degradation, drastic and surprising changes in land use. Budapest which is now the capital of Hungary has seen rapid land use changes in the past 150 years especially from 1850'ies to early 20th century. The population of the city rapidly grown from the end of 19th century to early 20th century; i.e. it is tripled from 1880 to 1920 and reached nearly 1 million in 40 years. This population boom induced significant land degradation, changes in land use and loss of habitats. The paper presents examples how the land use has changed in the past 105 years with historic maps and interpreted cases suggesting different pathways leading to land degradation. The first one focuses on vineyards and grape cultivation and explains how these areas were first converted to limestone quarries to provide construction material to the city and then transformed to urban habitat in the early 20th century again. The cellars - former quarry galleries - than were used for housing (urban habitat) and later were used as storage facilities and mushroom cultivation sites. At present these subsurface openings cause high risk of land development (collapse) and limit the land use of the given area. The current paper also outlines the development of the city via the perspective of natural resources, since drinking water and industrial water need modified the land development and urbanization. Another example is also given how the brewery industry exploited natural resources and the surface water use was shifted to exploitation of karstic waters causing land degradation and drop of water table. Additional example demonstrates how the former

  6. Development of standards, criteria, specifications. Vol. 2 - Longlife.. Sustainable, energy efficient and resource saving, residential buildings in consideration of unified procedures and new and adapted technologies. Project in the Baltic Sea region programme 2007-2013

    Energy Technology Data Exchange (ETDEWEB)

    Rueckert, Klaus (ed.)

    2010-07-01

    Energy and Cost Efficiency as the key characteristics of the sustainability have been the main consideration of different parts of research represented in the Longlife 2 Report. Longlife 2 Report is in fact the final result of work package 4 ''Developments of Standards and Criteria for Sustainable Building and Construction''. Work package 4 was created based on the work package 3 ''Analysis and comparison of state of technology, administration and legal procedures, financial situation, demographic needs, similarities and differences in the participant countries: Denmark, Germany, Lithuania, Poland and Russia''. Three competence teams from each participant country studied, analyzed and examined these concepts from different point of view and introduced a framework to define the fundamental concepts of sustainability. This crucial phase of project based on the objectives and activities of each team could be described as follow: Team 1'' Engineering and Building Technology standards'' and related expertise emphasized on the most architectural solutions and characteristics of sustainability in very wide spectrum. That is realized through adaptable methods of design, typology, standards, assessment systems, proper and available materials with the best physical features, the most efficient and advanced structures and technologies in order to have the most possible energy and resource saving beside the less life cycle cost of the residential building. Team 2 '' Method of planning permit and tendering Procedure'' and its expertise from another point of view worked on the legal and administrative aspects of sustainability and examining possibility and capacity of each involved country to realize sustainable construction. Team 3 ''Economical and Financial basis, Industry and quality'' and its related expertise explained and examined the adequate and necessary tools for

  7. Cost savings from a telemedicine model of care in northern Queensland, Australia.

    Science.gov (United States)

    Thaker, Darshit A; Monypenny, Richard; Olver, Ian; Sabesan, Sabe

    2013-09-16

    To conduct a cost analysis of a telemedicine model for cancer care (teleoncology) in northern Queensland, Australia, compared with the usual model of care from the perspective of the Townsville and other participating hospital and health services. Retrospective cost-savings analysis; and a one-way sensitivity analysis performed to test the robustness of findings in net savings. Records of all patients managed by means of teleoncology at the Townsville Cancer Centre (TCC) and its six rural satellite centres in northern Queensland, Australia between 1 March 2007 and 30 November 2011. Costs for set-up and staffing to manage the service, and savings from avoidance of travel expenses for specialist oncologists, patients and their escorts, and for aeromedical retrievals. There were 605 teleoncology consultations with 147 patients over 56 months, at a total cost of $442 276. The cost for project establishment was $36 000, equipment/maintenance was $143 271, and staff was $261 520. The estimated travel expense avoided was $762 394; this figure included the costs of travel for patients and escorts of $658 760, aeromedical retrievals of $52 400 and travel for specialists of $47 634, as well as an estimate of accommodation costs for a proportion of patients of $3600. This resulted in a net saving of $320 118. Costs would have to increase by 72% to negate the savings. The teleoncology model of care at the TCC resulted in net savings, mainly due to avoidance of travel costs. Such savings could be redirected to enhancing rural resources and service capabilities. This teleoncology model is applicable to geographically distant areas requiring lengthy travel.

  8. The influence of multiple goals on driving behavior: the case of safety, time saving, and fuel saving.

    Science.gov (United States)

    Dogan, Ebru; Steg, Linda; Delhomme, Patricia

    2011-09-01

    Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers' behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goals that are always present during driving. A between-subjects design was used with one group of drivers managing two goals (safety and fuel saving) and another group managing three goals (safety, fuel saving, and time saving) while driving. Participants were provided continuous feedback on the fuel saving goal via a meter on the dashboard. The results indicate that even when a fuel saving or time saving goal is salient, safety goals are still given highest priority when interactions with other road users take place and when interacting with a traffic light. Additionally, performance on the fuel saving goal diminished for the group that had to manage fuel saving and time saving together. The theoretical implications for a goal hierarchy in driving tasks and practical implications for eco-driving are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Entrepreneurial Saving Practices and Reinvestment

    NARCIS (Netherlands)

    Beck, Thorsten; Pamuk, Haki; Uras, Burak R.

    2017-01-01

    We use a novel enterprise survey to gauge the relationship between saving instruments and entrepreneurial reinvestment. We show that while most informal saving practices are not associated with a lower likelihood of reinvestment when compared with formal saving practices, there is a significantly

  10. Social Capital and Savings Behavior

    DEFF Research Database (Denmark)

    Newman, Carol; Tarp, Finn; Khai, Luu Duc

    In this paper, we analyze household savings in rural Vietnam paying particular attention to the factors that determine the proportion of savings held as formal deposits. Our aim is to explore the extent to which social capital can play a role in promoting formal savings behavior. Social capital...

  11. Chinese hotel general managers' perspectives on energy-saving practices

    Science.gov (United States)

    Zhu, Yidan

    As hotels' concern about sustainability and budget-control is growing steadily, energy-saving issues have become one of the important management concerns hospitality industry face. By executing proper energy-saving practices, previous scholars believed that hotel operation costs can decrease dramatically. Moreover, they believed that conducting energy-saving practices may eventually help the hotel to gain other benefits such as an improved reputation and stronger competitive advantage. The energy-saving issue also has become a critical management problem for the hotel industry in China. Previous research has not investigated energy-saving in China's hotel segment. To achieve a better understanding of the importance of energy-saving, this document attempts to present some insights into China's energy-saving practices in the tourist accommodations sector. Results of the study show the Chinese general managers' attitudes toward energy-saving issues and the differences among the diverse hotel managers who responded to the study. Study results indicate that in China, most of the hotels' energy bills decrease due to the implementation of energy-saving equipments. General managers of hotels in operation for a shorter period of time are typically responsible for making decisions about energy-saving issues; older hotels are used to choosing corporate level concerning to this issue. Larger Chinese hotels generally have official energy-saving usage training sessions for employees, but smaller Chinese hotels sometimes overlook the importance of employee training. The study also found that for the Chinese hospitality industry, energy-saving practices related to electricity are the most efficient and common way to save energy, but older hotels also should pay attention to other ways of saving energy such as water conservation or heating/cooling system.

  12. Energy. Saving 'Private' Areva

    International Nuclear Information System (INIS)

    Dupin, Ludovic

    2015-01-01

    While Areva keeps on loosing money (billions of euros for 2014), the saving of this company is at stake. Staff is already planned to be reduced in La Hague, and other staff reductions might occur after the failure of a previous strategic plan. Various activities could be sold (dismantling, mining). The article outlines the difficult relationships between Areva and EDF and the problems also faced by EDF. Some actors think that Areva should remain independent from EDF in order to be free to compete on international bidding. The rapprochement between these two companies is said to be necessary for the Ministry but seems very difficult to achieve

  13. Savings for the Poor

    OpenAIRE

    Ignacio Mas

    2010-01-01

    This paper reviews the relevance of formal financial services – in particular, savings – to poor people, the economic factors that have hindered the mass-scale delivery of such services in developing countries, and the technology-based opportunities that exist today to make massive gains in financial inclusion. It also highlights the benefits to government from universal financial access, as well as the key policy enablers that would need to be put in place to allow the necessary innovati...

  14. Locomotive energy savings possibilities

    Directory of Open Access Journals (Sweden)

    Leonas Povilas LINGAITIS

    2009-01-01

    Full Text Available Economic indicators of electrodynamic braking have not been properly estimated. Vehicles with alternative power trains are transitional stage between development of pollution- free vehicles. According to these aspects the investigation on conventional hybrids drives and their control system is carried out in the article. The equation that allows evaluating effectiveness of regenerative braking for different variants of hybrid drive are given. Presenting different types of locomotive energy savings power systems, which are using regenerative braking energy any form of hybrid traction vehicles systems, circuit diagrams, electrical parameters curves.

  15. Diamond-set drill bits: savings achieved at Cominak

    International Nuclear Information System (INIS)

    Artru, P.; Bibert, F.X.; Croisat, G.

    1988-01-01

    Rotary instead of percussion adoption of drilling in the underground Akouta mine (Niger) has been the cause of important savings in blasting and bolting operations. Other savings affect capital expenditures and indirect savings are coming from better working conditions. For blast holes drilling and bolting, spare parts expenditures are 2.4 times lower with rotary drilling. Drilling rods are cheaper and last longer with rotary drilling. A rotary equipped Jumbos fleet is cheaper to maintain and is 18% more available, due to less mechanical and other breakdowns. Total savings for the mine owner and operator Cominak reach more than a billion of CFA francs [fr

  16. Learning to save lives!

    CERN Document Server

    2003-01-01

    They're all around you and watch over you, but you won't be aware of them unless you look closely at their office doors. There are 308 of them and they have all been given 12 hours of training with the CERN Fire Brigade. Who are they? Quite simply, those who could one day save your life at work, the CERN first-aiders. First-aiders are recruited on a volunteer basis. "Training is in groups of 10 to 12 people and a lot of emphasis is placed on the practical to ensure that they remember the life-saving techniques we show them", explains Patrick Berlinghi, a CERN first-aid instructor from TIS Division. He is looking forward to the arrival of four new instructors, which will bring the total number to twelve (eleven firemen and one member of the Medical Service). "The new instructors were trained at CERN from 16 to 24 May by Marie-Christine Boucher Da Ros (a member of the Commission Pédagogie de l'Observatoire National Français du Secourisme, the education commission of France's national first-aid body). This in...

  17. Macroeconomic determinants of savings in Egypt "Statistical Model"

    Directory of Open Access Journals (Sweden)

    Hanaa Abdelaty Hasan Esmail

    2014-07-01

    Full Text Available Like lot of countries, aggregate consumption constitutes a major portion of Gross Domestic Product (GDP in Egypt. Consumption decisions determine savings decisions. In long term growth literature, differences in long term growth had been explained to a large extent by differences in the rates of savings which also determine a country’s investment in productive capacity, human capital and socio-economic infrastructure. In this study, we analyse macroeconomic determinants of savings in Egypt using Ordinary multiple regression. Our results indicate that national savings rate is positively related with real GDP growth rate. This suggests that saving is a positive function of income. The evidence suggests that national savings rate is negatively related with federal debt growth and inflation. This hints towards crowding out of private sector investment through decline in savings rate as a result of government’s indebtedness. Finally, negative association between savings rate and inflation implies that the consumer is rational and makes decisions based on his perceptions when it comes to allocating the lifetime resources over the period of his life. Increase in inflation dampens the incentive to save and people respond rationally which is made evident by the negative sign on inflation coefficient in our model.

  18. Does Daylight Saving Save Energy? A Meta-Analysis

    OpenAIRE

    Havránek, Tomáš; Herman, Dominik; Irsova, Zuzana

    2016-01-01

    The original rationale for adopting daylight saving time (DST) was energy savings. Modern research studies, however, question the magnitude and even direction of the effect of DST on energy consumption. Representing the first meta-analysis in this literature, we collect 162 estimates from 44 studies and find that the mean reported estimate indicates modest energy savings: 0.34% during the days when DST applies. The literature is not affected by publication bias, but the results vary systemati...

  19. Can lean save lives?

    Science.gov (United States)

    Fillingham, David

    2007-01-01

    The purpose of this paper is to show how over the last 18 months Bolton Hospitals NHS Trust have been exploring whether or not lean methodologies, often known as the Toyota Production System, can indeed be applied to healthcare. This paper is a viewpoint. One's early experience is that lean really can save lives. The Toyota Production System is an amazingly successful way of manufacturing cars. It cannot be simply translated unthinkingly into a hospital but lessons can be learned from it and the method can be adapted and developed so that it becomes owned by healthcare staff and focused towards the goal of improved patient care. Working in healthcare is a stressful and difficult thing. Everyone needs a touch of inspiration and encouragement. Applying lean to healthcare in Bolton seems to be achieving just that for those who work there.

  20. Estimation of technical interactions due to the competition for resource in a mixed-species fishery, and the typology of fleets and metiers in the English Channel

    DEFF Research Database (Denmark)

    Ulrich, Clara; Gascuel, D.; Dunn, M.R.

    2001-01-01

    importance for fishery management, as any control applied to one fishing unit may have positive or negative effects on others. The magnitude and direction of these effects cannot be easily measured, unless all fishing units and species in the fishery are considered simultaneously. Technical interactions...... for resource (stock externalities). The results are used to develop a typology of metiers and fleets based on their overall level of interaction for the resource. We also define fleets and metiers as structuring, dependent, intermediate or autonomous. (C) 2001 Ifremer...

  1. A review of seawater intrusion in the Nile Delta groundwater system – the basis for assessing impacts due to climate changes and water resources development

    NARCIS (Netherlands)

    Mabrouk, M.B.; Jonoski, A.; Solomatine, D.P.; Uhlenbrook, S.

    2013-01-01

    Serious environmental problems are emerging in the River Nile basin and its groundwater resources. Recent years have brought scientific evidence of climate change and development-induced environmental impacts globally as well as over Egypt. Some impacts are subtle, like decline of the Nile River

  2. Chapter 21: Estimating Net Savings - Common Practices. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Violette, Daniel M. [Navigant, Boulder, CO (United States); Rathbun, Pamela [Tetra Tech, Madison, WI (United States)

    2017-11-02

    This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM and V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to a program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings but does not prescribe methods.

  3. 12 CFR 583.21 - Savings association.

    Science.gov (United States)

    2010-01-01

    ... AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.21 Savings association. The term savings association means a Federal savings and loan association or a Federal savings bank chartered under section 5 of the Home Owners' Loan Act, a building and loan, savings and loan or homestead association or a cooperative...

  4. Reinforcement Learning and Savings Behavior.

    Science.gov (United States)

    Choi, James J; Laibson, David; Madrian, Brigitte C; Metrick, Andrew

    2009-12-01

    We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)-a high average and/or low variance return-increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes.

  5. The need for ventilators in the developing world: An opportunity to improve care and save lives

    Directory of Open Access Journals (Sweden)

    Vijay Krishnamoorthy

    2014-06-01

    Full Text Available The drive to breathe is a fundamental human and biologic behavior, regulated by a complex system of checks and balances in the body. When respiratory mechanics are deregulated by injury, infection, coma, or a host of other conditions, the biologic equilibrium shifts into a state of respiratory failure. When this occurs, mechanical ventilation can be a life saving therapy. While commonplace in developed countries, critical care is at its infancy in many developing countries, where basic technology is often not available. Thus, while many lives are saved in developed nations through the provision of mechanical ventilation, patients in many developing nations often die from otherwise reversible causes due to lack of resources, education, and training.

  6. Advances in Biological Water-saving Research: Challenge and Perspectives

    Institute of Scientific and Technical Information of China (English)

    Lun Shan; Xiping Deng; Suiqi Zhang

    2006-01-01

    Increasing the efficiency of water use by crops continues to escalate as a topic of concern because drought is a restrictive environmental factor for crop productivity worldwide. Greater yield per unit rainfall is one of the most important challenges in water-saving agriculture. Besides water-saving by irrigation engineering and conservation tillage, a good understanding of factors limiting and/or regulating yield now provides us with an opportunity to identify and then precisely select for physiological and breeding traits that increase the efficiency of water use and drought tolerance under water-limited conditions, biological water-saving is one means of achieving this goat. A definition of biological water-saving measures is proposed which embraces improvements in water-use efficiency (WUE) and drought tolerance, by genetic improvement and physiological regulation. The preponderance of biological water-saving measures is discussed and strategies identified for working within natural resource constraints. The technology and future perspectives of biological water saving could provide not only new water-saving techniques but also a scientific base for application of water-saving irrigation and conservation tillage.

  7. SWEEP - Save Water & Energy Education Program

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Gregory P.; Elliott, Douglas B.; Hillman, Tim C.; Hadley, Adam; Ledbetter, Marc R.; Payson, David R.

    2001-05-03

    The objective of this study was to develop, monitor, analyze, and report on an integrated resource-conservation program highlighting efficient residential appliances and fixtures. The sites of study were 50 homes in two water-constrained communities located in Oregon. The program was designed to maximize water savings to these communities and to serve as a model for other communities seeking an integrated approach to energy and water resource efficiency. The program included the installation and in-place evaluation of energy- and water-efficient devices including the following: horizontal axis clothes washers (and the matching clothes dryers), resource-efficient dishwashers, an innovative dual flush low-flow toilet, low-flow showerheads, and faucet aerators. The significance of this activity lies in its integrated approach and unique metering evaluation of individual end-use, aggregated residential total use, and system-wide energy and water benefits.

  8. Saving gas project

    Energy Technology Data Exchange (ETDEWEB)

    Vasques, Maria Anunciacao S. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Garantizado, Maria Auxiliadora G. [CONCREMAT Engenharia, Rio de Janeiro, RJ (Brazil)

    2009-12-19

    The work presented was implemented in municipalities around the construction of the pipeline project Urucu-Coari-Manaus, the Engineering / IETEG-IENOR, because of the constant release of workers, consequently the finishing stages of this work and its future completion. The Project aims to guide saving gas with the workforce, their families and communities to the enterprise of small business cooperatives and solidarity within the potential of the site. This project is developed through the workshops: entrepreneur ship, tourism, use, reuse and recycling of products, and hortifruiti culture, agroecology, agribusiness (cooperativism solidarity) and forestry. Its execution took place in two phases, the first called 'pilot' of 12/12/2007 to 27/03/2008 in sections A and B1, in the municipality of Coari stretch and B2 in Caapiranga. The second phase occurred from 30/06 to 27/09/08, in the words B1, in the municipalities of Codajas and Anori words and B2 in Iranduba, Manacapuru and Anama. The workshops were held in state and municipal schools and administered by the Institute of Social and Environmental Amazon - ISAM, which had a team of coordinators, teachers, experts and masters of the time until the nineteen twenty-two hours to implement the project. (author)

  9. Save energy, without entropy

    International Nuclear Information System (INIS)

    Steinmeyer, D.

    1992-01-01

    When we talk about saving energy what we usually mean is not wasting work. What we try to do when we design a process, is to use work as effectively as possible. It's hard to do that if we can't see it clearly. This paper illustrates how work can be seen (or calculated) without imposing entropy as a screen in front of it. We've all heard that the second law tells us that the entropy of the universe is increasing, and we are left with the feeling that the universe is ultimately headed for chaos, but receive little other information from this statement. A slightly more useful statement of the second law is the work potential of the universe is decreasing. However, this statement carries a needlessly negative ring. A simplified definition of the second law is: It takes work to change things. With these two corollaries: We can calculate the theoretical minimum work needed for a given change; and We can express the value of all changes in terms of work

  10. Saving-Based Asset Pricing

    DEFF Research Database (Denmark)

    Dreyer, Johannes Kabderian; Schneider, Johannes; T. Smith, William

    2013-01-01

    This paper explores the implications of a novel class of preferences for the behavior of asset prices. Following a suggestion by Marshall (1920), we entertain the possibility that people derive utility not only from consumption, but also from the very act of saving. These ‘‘saving-based’’ prefere...

  11. Geology of Woman Saving Concept

    Directory of Open Access Journals (Sweden)

    Shayesteh Madani

    2014-09-01

    Full Text Available Money is lubricant and an instrument for economic transaction. Money social dimension has increased over time, transforming it from a sole economic instrument to a device for various transactions. Money economic value in society is indicated through different forms, one of which is saving, in the sense of money accumulation and its use under specific future circumstances. Women, who form half of the society, take specific approaches to money and savings. The current research aims to investigate the perspectives and changing attitude strategy to money and saving among married women. The participants of this study include 20 to 70 year-old employed household married women who were observed phenomenologically and interviewed qualitatively on saving through.   The findings of this study demonstrated women perspectives on various types of saving, ways of saving, transfer methods, saving consumption forms and their mechanism. It also revealed that while money is an economic instrument and possess the economic material; attitudes and acts related to money are influenced by social conditions that has consequently turned saving into a social phenomenon.

  12. Prescription Program Provides Significant Savings

    Science.gov (United States)

    Rowan, James M.

    2010-01-01

    Most school districts today are looking for ways to save money without decreasing services to its staff. Retired pharmacist Tim Sylvester, a lifelong resident of Alpena Public Schools in Alpena, Michigan, presented the district with a pharmaceuticals plan that would save the district money without raising employee co-pays for prescriptions. The…

  13. You Owe It to Yourself: Boosting Retirement Saving with a Responsibility-Based Appeal

    Science.gov (United States)

    Bryan, Christopher J.; Hershfield, Hal E.

    2012-01-01

    Americans are not saving enough for retirement. Previous research suggests that this is due, in part, to people's tendency to think of the future self as more like another person than like the present self, making saving feel like giving money away rather than like investing in oneself. Using objective employer saving data, a field experiment…

  14. 12 CFR 591.3 - Loans originated by Federal savings associations.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Loans originated by Federal savings... PREEMPTION OF STATE DUE-ON-SALE LAWS § 591.3 Loans originated by Federal savings associations. (a) With regard to any real property loan originated or to be originated by a Federal savings association, as a...

  15. Option pricing: a flexible tool to disseminate shared savings contracts.

    Science.gov (United States)

    Friedberg, Mark W; Buendia, Anthony M; Lauderdale, Katherine E; Hussey, Peter S

    2013-08-01

    Due to volatility in healthcare costs, shared savings contracts can create systematic financial losses for payers, especially when contracting with smaller providers. To improve the business case for shared savings, we calculated the prices of financial options that payers can "sell" to providers to offset these losses. Using 2009 to 2010 member-level total cost of care data from a large commercial health plan, we calculated option prices by applying a bootstrap simulation procedure. We repeated these simulations for providers of sizes ranging from 500 to 60,000 patients and for shared savings contracts with and without key design features (minimum savings thresholds,bonus caps, cost outlier truncation, and downside risk) and under assumptions of zero, 1%, and 2% real cost reductions due to the shared savings contracts. Assuming no real cost reduction and a 50% shared savings rate, per patient option prices ranged from $225 (3.1% of overall costs) for 500-patient providers to $23 (0.3%) for 60,000-patient providers. Introducing minimum savings thresholds, bonus caps, cost outlier truncation, and downside risk reduced these option prices. Option prices were highly sensitive to the magnitude of real cost reductions. If shared savings contracts cause 2% reductions in total costs, option prices fall to zero for all but the smallest providers. Calculating the prices of financial options that protect payers and providers from downside risk can inject flexibility into shared savings contracts, extend such contracts to smaller providers, and clarify the tradeoffs between different contract designs, potentially speeding the dissemination of shared savings.

  16. REMINDER: Saved Leave Scheme (SLS)

    CERN Multimedia

    2003-01-01

    Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

  17. 12 CFR 561.43 - Savings association.

    Science.gov (United States)

    2010-01-01

    ..., chartered under section 5 of the Act, or a building and loan, savings and loan, or homestead association, or... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Savings association. 561.43 Section 561.43... AFFECTING ALL SAVINGS ASSOCIATIONS § 561.43 Savings association. The term savings association means a...

  18. Energy saving certificates: an improved instrument

    International Nuclear Information System (INIS)

    2016-02-01

    This report first presents Energy Saving Certificates as one of among other instruments aimed at reducing energy consumption, and indicates how the French consumer is concerned. The benefits of this instrument are outlined: low cost, autonomy, awareness-raising, quantitative assessment of achieved energy savings. Its objectives and results since its creation in 2006 are commented, and the report outlines that this type of instrument is spreading over Europe. The authors show that its efficiency has been improved along the years due to a periodic review of standardised operation sheets, a simplification of the declaration, and an optimization of related programmes. Besides, targets have been better identified. The report outlines that assessment and controls must however be strengthened in order to reduce financial risks and potential drifts. Answers to this report by the concerned minister and ADEME are provided

  19. About instrumental innovation. Energy saving certificates

    International Nuclear Information System (INIS)

    Baiz, Adam; Monnoyer-Smith, Laurence

    2016-09-01

    Energy saving certificates (in French CEE for certificats d'economie d'energie) have been implemented in 2006, and have proven to be a rather efficient tool of public policy, with a low cost, and a good social acceptability, notably due to its hybrid nature (incentive and coercive) in function of the targeted actors. Thus, this document addresses and discusses the interest of such instruments for the public environmental policy. It outlines that instruments tend to be always less coercive, and then comments the example of these energy saving certificates: brief presentation, discussion and explanation of their efficiency, multi-dimensional nature of this instrument, benefits of more or less coercive instruments depending on the actors (State, households, energy providers)

  20. FINANCIAL SITUATION AND ATTITUDES TOWARDS SAVING IN POLISH SOCIETY:EVIDENCE FROM MICRO DATA

    Directory of Open Access Journals (Sweden)

    ANETA MARIA KŁOPOCKA

    2014-05-01

    Full Text Available Savings of the household sector are undoubtedly very important both in terms of micro- (for the optimum personal finance management and macroeconomics (from the perspective of the economic growth. Furthermore, the major transformation has occurred in the household saving behavior in Poland in recent years. This is due to sharp changes in the functioning of the households in the period of economic transformation and is the result of the global financial and economic crisis. This paper provides empirical evidence of the complex interrelations of income, level of optimism/pessimism, attitudes towards saving and households' consumption–savings decisions. There is a strong income and savings relationship due to the positive income effect on the household saving propensity (through the increased motivation and the long run planning acceptance and the saving ability due to ample satisfaction of household consumption needs. Higher income leads to the self-restraint rejection. The level of household optimism/pessimism exerts a substantial effect on the saving motives and attitudes towards saving. The decreasing expectations leads to the slope of the overall saving motivation. Moreover pessimists seem to reveal the lowest inclination to deliberate saving. Simultaneously, they seem to be most suspicious about the bank loan incurring. The level of optimism is positively associated with both the share of savers and the level of accumulated savings.

  1. Reinforcement Learning and Savings Behavior*

    Science.gov (United States)

    Choi, James J.; Laibson, David; Madrian, Brigitte C.; Metrick, Andrew

    2009-01-01

    We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)—a high average and/or low variance return—increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes. PMID:20352013

  2. Overview of contractual savings institutions

    OpenAIRE

    Vittas, Dimitri; Skully, Michael

    1991-01-01

    Contractual savings institutions include national provident funds, life insurance companies, private pension funds, and funded social pension insurance systems. They have long-term liabilities and stable cash flows and are therefore ideal providers of term finance, not only to government and industry, but also to municipal authorities and the housing sector. Except for Singapore, Malaysia, and a few other countries, most developing countries have small and insignificant contractual savings in...

  3. The rise of corporate savings

    OpenAIRE

    Roc Armenter

    2012-01-01

    Over the past few decades, several developed economies have experienced large changes in how much households and firms save. In fact, a sharp increase in firms’ savings behavior has changed the net position of the (nonfinancial) corporate sector vis-à-vis the rest of the economy. ; Why have firms in the business of producing goods or services become lenders? This is quite at odds with traditional models of corporate finance, which suggest that firms issue debt and equity to fund their operati...

  4. Energy savings: persuasion and persistence

    Energy Technology Data Exchange (ETDEWEB)

    Eijadi, David; McDougall, Tom; Leaf, Kris; Douglas, Jim; Steinbock, Jason; Reimer, Paul [The Weidt Group, Minnetonka, MN (United States); Gauthier, Julia [Xcel Energy, Minneapolis, MN (United States); Wild, Doug; Richards McDaniel, Stephanie [BWBR Architects, Inc., Saint Paul, MN (United States)

    2005-07-01

    In this study, the architects, sponsoring utility and energy simulation specialist joined together to investigate the persistence of energy savings in three completed projects: a college library; a municipal transportation facility; and a hospital. The primary question being 'How well did the design decisions made with the help of simulation analysis translate into building operations over several years?' Design simulation and metered performance data are compared for specific energy-saving strategies. The paper provides a brief overview of the basis of selection of the three projects, the energy design assistance methods employed and the decisions made, along with their savings expectations. For each case, design characteristics, modelling assumptions, selected strategies and actual metered performance are outlined. We find evidence of appropriate levels of energy conservation, but they are not the absolute values predicted. In each case, the discrepancies between modelling assumptions and final construction or operating procedures are identified, examined and rectified. The paper illustrates that while owners are saving energy, they are not always getting the full savings potential for what they install. The paper concludes with a re-examination of the overall process. It evaluates the potential for additional savings of individual technologies and related larger utility incentives to design teams and building owners.

  5. Energy supply and energy saving in Ukraine

    Directory of Open Access Journals (Sweden)

    V.M. Ilchenko

    2015-09-01

    Full Text Available The article examines the main problems and solutions of energy saving and energy supply in Ukraine. Low energy efficiency has become one of the main factors of the crisis in the Ukrainian economy. The most relevant scientific and methodical approaches to assessment of the level of energy consumption and saving are indicated. The comparative analysis of annual energy use has been made. A potential to solve energy supply problems is strongly correlated with the ability to ensure the innovative development of economy for efficient and economical use of existing and imported energy resources. The ways for reducing of energy resource consumption have been suggested. Creation of technological conditions for the use of alternative energy sources is considered to be rational also. The development of renewable sources of energy (alternative and renewable energy sources will provide a significant effect in reducing the use of traditional energy sources, harmful emissions and greenhouse gas. Under these conditions, increasing of energy efficiency of economy and its competitiveness can be real. Improvement of environmental and social conditions of citizens of the country will mark a positive step towards the EU, and also will cancel some problems of the future generation.

  6. Using wastes as resources

    International Nuclear Information System (INIS)

    Prakasam, T.B.S.; Lue-Hing, C.

    1992-01-01

    The collection, treatment, and disposal of domestic and industrial wastewater, garbage, and other wastes present considerable problems in urban and semiurban areas of developing countries. Major benefits of using integrated treatment and resource recovery systems include waste stabilization, recovering energy as biogas, producing food from algae and fish, irrigation, improved public health, and aquatic weed control and use. Information and research are needed, however, to assesss the appropriateness, benefits, and limitations of such technology on a large scale. System configuration depends on the types and quantities of wastes available for processing. There must be enough collectable waste for the system to be viable. Information should be gathered to asses whether there is a net public health benefit by implementing a waste treatment and resource recovery system. Benefits such as savings in medical expenses and increased worker productivity due to improved health may be difficult to quantify. The potential health risks created by implementing a resource recovery system should be studied. The most difficult issues to contend with are socioeconomic in nature. Often, the poor performance of a proven technology is attributed to a lack of proper understanding of its principles by the operators, lack of community interest, improper operator training, and poor management. Public education to motivate people to accept technologies that are beneficial to them is important

  7. 76 FR 16477 - General Reporting and Recordkeeping by Savings Associations and Savings and Loan Holding Companies

    Science.gov (United States)

    2011-03-23

    ... Savings Associations and Savings and Loan Holding Companies AGENCY: Office of Thrift Supervision (OTS...), 12 CFR 562.4 (audit of savings association, savings and loan holding company, or affiliate), 12 CFR... the savings association), 12 CFR 584.1(f) (books and records of each savings and loan holding company...

  8. Spatial response surface modelling in the presence of data paucity for the evaluation of potential human health risk due to the contamination of potable water resources.

    Science.gov (United States)

    Liu, Shen; McGree, James; Hayes, John F; Goonetilleke, Ashantha

    2016-10-01

    Potential human health risk from waterborne diseases arising from unsatisfactory performance of on-site wastewater treatment systems is driven by landscape factors such as topography, soil characteristics, depth to water table, drainage characteristics and the presence of surface water bodies. These factors are present as random variables which are spatially distributed across a region. A methodological framework is presented that can be applied to model and evaluate the influence of various factors on waterborne disease potential. This framework is informed by spatial data and expert knowledge. For prediction at unsampled sites, interpolation methods were used to derive a spatially smoothed surface of disease potential which takes into account the uncertainty due to spatial variation at any pre-determined level of significance. This surface was constructed by accounting for the influence of multiple variables which appear to contribute to disease potential. The framework developed in this work strengthens the understanding of the characteristics of disease potential and provides predictions of this potential across a region. The study outcomes presented constitutes an innovative approach to environmental monitoring and management in the face of data paucity. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Power Saving Scheduling Scheme for Internet of Things over LTE/LTE-Advanced Networks

    Directory of Open Access Journals (Sweden)

    Yen-Wei Kuo

    2015-01-01

    Full Text Available The devices of Internet of Things (IoT will grow rapidly in the near future, and the power consumption and radio spectrum management will become the most critical issues in the IoT networks. Long Term Evolution (LTE technology will become a promising technology used in IoT networks due to its flat architecture, all-IP network, and greater spectrum efficiency. The 3rd Generation Partnership Project (3GPP specified the Discontinuous Reception (DRX to reduce device’s power consumption. However, the DRX may pose unexpected communication delay due to missing Physical Downlink Control Channel (PDCCH information in sleep mode. Recent studies mainly focus on optimizing DRX parameters to manage the tradeoff between the energy consumption and communication latency. In this paper, we proposed a fuzzy-based power saving scheduling scheme for IoT over the LTE/LTE-Advanced networks to deal with the issues of the radio resource management and power consumption from the scheduling and resource allocation perspective. The proposed scheme considers not only individual IoT device’s real-time requirement but also the overall network performance. The simulation results show that our proposed scheme can meet the requirements of the DRX cycle and scheduling latency and can save about half of energy consumption for IoT devices compared to conventional approaches.

  10. The influence of Multiple Goals on Driving Behavior: the case of Safety, Time Saving, and Fuel Saving

    OpenAIRE

    DOGAN, Ebru; STEG, Linda; DELHOMME, Patricia

    2011-01-01

    Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers' behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goal...

  11. Evaluation of energy and cost savings in mobile Cloud RAN

    DEFF Research Database (Denmark)

    Checko, Aleksandra; Christiansen, Henrik Lehrmann; Berger, Michael Stübert

    2013-01-01

    , is sub optimal, comparing to a novel, cloud based architecture called Cloud Radio Access Network (C-RAN). In C-RAN a group of cells shares processing resources, and hence benefit from statistical multiplexing gain is expected. In this paper, the energy and cost savings in C-RAN are evaluated numerically...

  12. Energy conservation, energy efficiency and energy savings regulatory hypotheses - taxation, subsidies and underlying economics

    Energy Technology Data Exchange (ETDEWEB)

    Trumpy, T. [International Legal Counsel, Brussels (Belgium)

    1995-12-01

    More efficient use of energy resources can be promoted by various regulatory means, i.e., taxation, subsidies, and pricing. Various incentives can be provided by income and revenue tax breaks-deductible energy audit fees, energy saving investment credits, breaks for energy saving entrepreneurs, and energy savings accounts run through utility accounts. Value added and excise taxes can also be adjusted to reward energy saving investments and energy saving entrepreneurial activity. Incentives can be provided in the form of cash refunds, including trade-in-and-scrap programs and reimbursements or subsidies on audit costs and liability insurance. Pricing incentives include lower rates for less energy use, prepayment of deposit related to peak load use, electronically dispatched multiple tariffs, savings credits based on prior peak use, and subsidized {open_quotes}leasing{close_quotes} of more efficient appliances and lights. Credits, with an emphasis on pooling small loans, and 5-year energy savings contracts are also discussed.

  13. Saving more to consume more. EDF's communication ambiguities during the energy saving era

    International Nuclear Information System (INIS)

    Bouvier, Yves

    2012-01-01

    Since 1974, EDF is placed between a communication scheme imposed for energy savings and an industrial strategy of massive investment in nuclear power. In ten years, the company managed to increase households electricity consumption without advertising, due in particular to electric heating. But strong tensions were generated by this situation and led the company to develop an institutional communication to the employees and to the general public

  14. Main trends of energy savings in dwelling houses for Lithuanian conditions

    Energy Technology Data Exchange (ETDEWEB)

    Stankevicius, V.; Karbauskaite, J.; Dapkus, G. [Institute of Architecture and construction (Lithuania)

    1995-12-31

    Incentive measures for efficient consumption of energy in buildings in Lithuania, were presented. Statistics have shown that the average annual building heat losses are 350 kW/sq.m of heated area. It was estimated, that if every building was insulated according to the requirements of the Lithuanian National Building Code, the annual energy savings would be in the order of 50 to 60 percent. Essential energy saving measures with due regard to Lithuania`s current financial and technical resources were detailed. It was suggested that installing energy efficient windows would be the cheapest and most effective measure to begin energy conservation. The addition of effective insulation of external walls would be a favoured but more costly measure, especially as far as insulating existing houses is concerned. The pay-back period of adding extra insulation was also described, although this option is not of the highest priority. It was suggested that a system of special incentives, if offered by the Lithuanian government, could prove to be powerful motivators to carry out these energy saving measures. 2 tabs., 1 fig.

  15. Energy savings from housing: Ineffective renovation subsidies vs efficient demolition and reconstruction incentives

    International Nuclear Information System (INIS)

    Dubois, Maarten; Allacker, Karen

    2015-01-01

    Energy savings in the housing sector are key to reduce global greenhouse gas emissions. Policies to incentivize energy savings are however disparate between countries. Taking into account environmental aspects and consumer surplus, the paper uses a stylized economic model to assess the effectiveness and efficiency of three economic instruments: subsidies for renovation, subsidies for demolition and reconstruction projects and subsidies for building new houses on virgin land. The assessment also relates to differentiated value added taxes and other financial incentives such as green loans. In a counter-intuitive way, the model highlights that subsidies for renovations with minor energy gains worsen the overall energy consumption of housing due to the inducement of lock-ins with energy inefficient houses. Structural changes are needed in the use of policy instruments. First, commonly applied support schemes for renovations with minor energy savings should be abolished. Second, scarce public resources should incentivize deep renovation and demolition and reconstruction. Finally, taxes should apply on the use of virgin land to persuade households with a high willingness to pay for a new house, to invest in demolition and reconstruction. - Highlights: • Renovation subsidies worsen overall energy consumption of housing. • Renovation induces a lock-in with energy inefficient houses. • Renovation subsidies should be abolished or structurally reformed. • Policy should incentivize demolition and reconstruction projects. • Building on virgin land should be taxed.

  16. Small scale models equal large scale savings

    International Nuclear Information System (INIS)

    Lee, R.; Segroves, R.

    1994-01-01

    A physical scale model of a reactor is a tool which can be used to reduce the time spent by workers in the containment during an outage and thus to reduce the radiation dose and save money. The model can be used for worker orientation, and for planning maintenance, modifications, manpower deployment and outage activities. Examples of the use of models are presented. These were for the La Salle 2 and Dresden 1 and 2 BWRs. In each case cost-effectiveness and exposure reduction due to the use of a scale model is demonstrated. (UK)

  17. Control Evaluation Information System Savings

    Directory of Open Access Journals (Sweden)

    Eddy Sutedjo

    2011-05-01

    Full Text Available The purpose of this research is to evaluate the control of information system savings in the banking and to identify the weaknesses and problem happened in those saving systems. Research method used are book studies by collecting data and information needed and field studies by interview, observation, questioner, and checklist using COBIT method as a standard to assess the information system control of the company. The expected result about the evaluation result that show in the problem happened and recommendation given as the evaluation report and to give a view about the control done by the company. Conclusion took from this research that this banking company has met standards although some weaknesses still exists in the system.Index Terms - Control Information System, Savings

  18. Are Women Empowered to Save?

    Directory of Open Access Journals (Sweden)

    Frances Woolley

    2013-12-01

    Full Text Available Female economic empowerment – rising earnings, increased opportunities, greater labour force participation – has given many women the means to save. The shifting of responsibility for retirement security from employers and governments onto individuals has given women a reason to save. But are women actually saving? In this paper, we explore the relationship between the gender dynamics within a family and the accumulation of wealth. We find that little evidence in support of the conventional wisdom that families with a female financial manager save more and repay their debts more often. We find some evidence that male financial management leads to greater savings, and other evidence suggesting that savings patterns have a complex relationship with intra-family gender dynamics. El empoderamiento económico de la mujer – el aumento de los ingresos, mayores oportunidades, mayor participación laboral – ha dado a muchas mujeres los medios para ahorrar. Al pasar la responsabilidad de los ingresos de la jubilación de los empleadores y el gobierno a los individuos ha dado a las mujeres un motivo para ahorrar. ¿Pero realmente ahorran las mujeres? En este artículo se analizan las relaciones entre las dinámicas de género en una familia, y la acumulación de riqueza. Se ha llegado a la conclusión de que hay poca evidencia que apoye la creencia convencional de que las familias en las que una mujer gestiona las financias ahorran más y devuelven sus créditos más frecuentemente. Se ha encontrado alguna evidencia de que la gestión financiera por varones acarrea mayores ahorros, y otras evidencias que sugieren que los patrones de ahorro tienen una relación compleja con las dinámicas de género dentro de la familia.

  19. How to estimate realistic energy savings in Energy Performance Certificates

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Altmann, Nagmeh; Berecová, Monika

    Given the fact that most MS use fixed or other kinds of default values as boundary condition input for energy performance calculations, it is not surprising that the calculated energy performance differs from the measured energy consumption. As a consequence, the calculated energy savings due...... stationary calculation tools using monthly average values. The optimum solution for energy performance certificates and calculating realistic energy savings is to have two calculations. One calculation, using default values to calculate the label itself, and one with actual input parameters for calculating...... energy performance before and after implementing energy saving measures. Actual values though, may be difficult to identify, so there is a need to make adaptations to reality easy. Even if actual values are available, there are still issues that cause calculated energy savings to differ from the obtained...

  20. Improved methods to evaluate realised energy savings

    NARCIS (Netherlands)

    Boonekamp, P.G.M.

    2005-01-01

    This thesis regards the calculation of realised energy savings at national and sectoral level, and the policy contribution to total savings. It is observed that the results of monitoring and evaluation studies on realised energy savings are hardly applied in energy saving policy. Causes are the lack

  1. Theory and Practice of the Public Sector Savings: The Case of Czech Regions

    Directory of Open Access Journals (Sweden)

    Milan PŮČEK

    2014-06-01

    Full Text Available In recent years, the necessity to allocate resources in economically rational ways has been amplified in the context of budget austerity measures and the overall tendency for balanced public budgets. Under these long-term circumstances, political leaders and public sector managers will be motivated to allocate available resources in economic, effective and purposeful ways, thus reducing waste of resources and seeking rational savings. The study shows some ways of achieving that goals by finding rational savings in the performance of delegated central government administration. The study analyzes expenditures and revenues for those tasks of central government administration that are delegated to regions in the Czech Republic. Based on the proposed theoretical concept of public sector savings and on the analysis of secondary and primary data, it assesses possibilities for achieving regional savings in delegated central government administration. Calculations based on empirical data demonstrate that regional governments have space for internal savings; benchmarking comparison and simulations confirm the possibilities for reducing waste of resources and achieving rational savings. Total calculated savings for all regions (for the year 2009 range between EUR 16 million and 29 million according to simulations, and the highest savings would be achieved by Central Bohemia.

  2. Evaluation of water saving measures for mid-sized tourist lodging units: the case of Samos Island, Greece

    Directory of Open Access Journals (Sweden)

    Eleftheria E. Klontza

    2016-06-01

    Full Text Available Hotel sector causes significant environmental stress in both natural and built up areas due to their consumption of water and energy. In addition, the production of large volumes of liquid and solid waste results in a significant environmental footprint. The use of water and energy by hotels is strongly linked (e.g. energy is consumed for hot water, operation of the pool, preparation of meals, etc. and usually referred to as the water – energy nexus. Thus, for big consumers like hotels, water and energy consumption should be addressed collectively as water-saving measures can lead to a reduction in energy consumption. The aim of this study is to assess the environmental performance of mid-sized hotel units by analyzing and quantifying their use of water. An analysis using a two-step approach was made of 8 accommodation facilities located on Samos Island, Greece: (i a mapping of water use by adopting an end-use approach, and then (ii an assessment of saving practices using three main criteria: savings, cost of investment and payback time. The preliminary results indicate that for small sized lodging units, water consumed inside the guest rooms accounts for the majority of all the water used and low-cost water saving measures and actions can reduce the pressure on water resources without disturbing guests, while increasing the financial profitability of a hotel.

  3. Water Savings of Crop Redistribution in the United States

    Directory of Open Access Journals (Sweden)

    Kyle Frankel Davis

    2017-01-01

    Full Text Available Demographic growth, changes in diet, and reliance on first-generation biofuels are increasing the human demand for agricultural products, thereby enhancing the human pressure on global freshwater resources. Recent research on the food-water nexus has highlighted how some major agricultural regions of the world lack the water resources required to sustain current growth trends in crop production. To meet the increasing need for agricultural commodities with limited water resources, the water use efficiency of the agricultural sector must be improved. In this regard, recent work indicates that the often overlooked strategy of changing the crop distribution within presently cultivated areas offers promise. Here we investigate the extent to which water in the United States could be saved while improving yields simply by replacing the existing crops with more suitable ones. We propose crop replacement criteria that achieve this goal while preserving crop diversity, economic value, nitrogen fixation, and food protein production. We find that in the United States, these criteria would greatly improve calorie (+46% and protein (+34% production and economic value (+208%, with 5% water savings with respect to the present crop distribution. Interestingly, greater water savings could be achieved in water-stressed agricultural regions of the US such as California (56% water savings, and other western states.

  4. Due diligence

    International Nuclear Information System (INIS)

    Sanghera, G.S.

    1999-01-01

    The Occupational Health and Safety (OHS) Act requires that every employer shall ensure the health and safety of workers in the workplace. Issues regarding the practices at workplaces and how they should reflect the standards of due diligence were discussed. Due diligence was described as being the need for employers to identify hazards in the workplace and to take active steps to prevent workers from potentially dangerous incidents. The paper discussed various aspects of due diligence including policy, training, procedures, measurement and enforcement. The consequences of contravening the OHS Act were also described

  5. Survey of industrial radioisotope savings

    International Nuclear Information System (INIS)

    1965-01-01

    Only three decades after the discovery of artificial radioactivity and two after radioisotopes became available in quantity, methods employing these as sources or tracers have found widespread use, not only in scientific research, but also in industrial process and product control. The sums spent by industry on these new techniques amount to millions of dollars a year. Realizing the overall attitude of industry to scientific progress - to accept only methods that pay relatively quickly - one can assume that the economic benefits must be of a still larger order of magnitude. In order to determine the extent to which radioisotopes are in daily use and to evaluate the economic benefits derived from such use, IAEA decided to make an 'International Survey on the Use of Radioisotopes in Industry'. In 1962, the Agency invited a number of its highly industrialized Member States to participate in this Survey. Similar surveys had been performed in various countries in the 1950's. However, the approaches and also the definition of the economic benefits differed greatly from one survey to another. Hence, the Agency's approach was to try to persuade all countries to conduct surveys at the same time, concerning the same categories of industries and using the same terms of costs, savings, etc. In total, 24 Member States of the Agency agreed to participate in the survey and in due course they submitted contributions. The national reports were discussed at a 'Study Group Meeting on Radioisotope Economics', convened in Vienna in March 1964. Based upon these discussions, the national reports have been edited and summarized. A publication showing the administration of the Survey and providing all details is now published by the Agency. From the publication it is evident that in general the return of technical information was quite high, of the order of 90%, but, unfortunately the economic response was much lower. However, most of the reports had some bearing on the economic aspects

  6. 76 FR 78085 - Permissible Investments for Federal and State Savings Associations: Corporate Debt Securities

    Science.gov (United States)

    2011-12-15

    ...; Guidance on Due Diligence Requirements for Savings Associations in Determining Whether a Corporate Debt... commitments under the security for the projected life of the investment. For purposes of the Proposed Rule, an... sets forth supervisory expectations for savings associations conducting due diligence to determine...

  7. Good practice in saving energy at school

    Science.gov (United States)

    Veronesi, Paola; Bonazzi, Enrico

    2014-05-01

    We teach students between 14 and 18 years old at a high school in Italy. In the first class, one of the topics we treat is related to the atmosphere. The students learn the composition of air, the importance of the natural greenhouse effect in keeping the average temperature of the planet and how human activity is increasing the level of greenhouse gases, enhancing greenhouse effect and causing global warming. It is possible to reach this knowledge using different materials and methods such as schoolbooks, articles, websites or films, individual or group work, but as students gradually become aware of the problem of climate change due to global warming, it is necessary to propose a solution that can be experienced and measured by students. This is the aim of the project "Switch off the light, to switch on the future". The project doesn't need special materials to be carried out but all the people in the community who work and "live" at school should participate in it. The project deals directly with saving electric energy, by changing the habits of the use of electricity. Saving electric energy means saving CO2 emitted to atmosphere, and consequently contributing to the reduction of greenhouse gases emission. Normally, lights in the school are switched on in the early morning and switched off at the end of lessons. Nobody is responsible to turn out the lights in classes, so students choose one or two "Light guardians" who are responsible for the light management. Simple rules for light management are written and distributed in the classes so that the action of saving energy is spread all over the school. One class participates in the daily data collection from the electricity meter, before and after the beginning of the action. At the end of the year the data are treated and presented to the community, verifying if the electric consumption has been cut down or not. This presentation is public, with students who directly introduce collected data, results and

  8. Revolving fund for energy saving

    International Nuclear Information System (INIS)

    Prebensen, K.

    1993-01-01

    A key issue in Eastern Europe is the adjustment of prices from the former COMECON level to a level conforming with free market conditions. In the case of household heating, this issue involves the removal of government subsidies leading to sharply increasing prices, metering of individual consumption, improving the efficiency of energy production, distribution and use - where savings of 30-50% in each link are technically feasible - thereby providing a potential for a adapting consumption patterns to higher energy prices, provided that funds are available. Currently, investment in commercial heat production and distribution systems have received substantial international support - whereas investment in reduction of demand has been little exploited. The Revolving Fund for Energy Savings in Polish Households is a concept for efficient financing of small-scale projects. It aims at financing, on the level of housing cooperatives, on the basis of a simplified lending and project evaluation procedure, well suited to current Polish conditions or an organizationally and financially weak banking system and little developed technical knowledge in the field of energy saving. A general introduction to the issue is given and technical problems are elaborated. The implementation of Energy Savings in Housing seen from the banking point of view, and a current pilot scheme for financing, are described. (AB)

  9. Social Capital and Savings Behaviour

    DEFF Research Database (Denmark)

    Newman, Carol; Tarp, Finn; Van Den Broeck, Katleen

    We explore the extent to which social capital can play a role in imparting information about the returns to saving where potential knowledge gaps and mistrust exists. Using data from Vietnam we find strong evidence to support the hypothesis that information transmitted via reputable social...

  10. Save the Boulders Beach Penguins

    Science.gov (United States)

    Sheerer, Katherine; Schnittka, Christine

    2012-01-01

    Maybe it's the peculiar way they walk or their cute little suits, but students of all ages are drawn to penguins. To meet younger students' curiosity, the authors adapted a middle-school level, penguin-themed curriculum unit called Save the Penguins (Schnittka, Bell, and Richards 2010) for third-grade students. The students loved learning about…

  11. Defining a standard metric for electricity savings

    International Nuclear Information System (INIS)

    Koomey, Jonathan; Akbari, Hashem; Blumstein, Carl; Brown, Marilyn; Brown, Richard; Calwell, Chris; Carter, Sheryl; Cavanagh, Ralph; Chang, Audrey; Claridge, David; Craig, Paul; Diamond, Rick; Eto, Joseph H; Fulkerson, William; Gadgil, Ashok; Geller, Howard; Goldemberg, Jose; Goldman, Chuck; Goldstein, David B; Greenberg, Steve

    2010-01-01

    The growing investment by governments and electric utilities in energy efficiency programs highlights the need for simple tools to help assess and explain the size of the potential resource. One technique that is commonly used in this effort is to characterize electricity savings in terms of avoided power plants, because it is easier for people to visualize a power plant than it is to understand an abstraction such as billions of kilowatt-hours. Unfortunately, there is no standardization around the characteristics of such power plants. In this letter we define parameters for a standard avoided power plant that have physical meaning and intuitive plausibility, for use in back-of-the-envelope calculations. For the prototypical plant this article settles on a 500 MW existing coal plant operating at a 70% capacity factor with 7% T and D losses. Displacing such a plant for one year would save 3 billion kWh/year at the meter and reduce emissions by 3 million metric tons of CO 2 per year. The proposed name for this metric is the Rosenfeld, in keeping with the tradition among scientists of naming units in honor of the person most responsible for the discovery and widespread adoption of the underlying scientific principle in question-Dr Arthur H Rosenfeld.

  12. Defining a standard metric for electricity savings

    Energy Technology Data Exchange (ETDEWEB)

    Koomey, Jonathan [Lawrence Berkeley National Laboratory and Stanford University, PO Box 20313, Oakland, CA 94620-0313 (United States); Akbari, Hashem; Blumstein, Carl; Brown, Marilyn; Brown, Richard; Calwell, Chris; Carter, Sheryl; Cavanagh, Ralph; Chang, Audrey; Claridge, David; Craig, Paul; Diamond, Rick; Eto, Joseph H; Fulkerson, William; Gadgil, Ashok; Geller, Howard; Goldemberg, Jose; Goldman, Chuck; Goldstein, David B; Greenberg, Steve, E-mail: JGKoomey@stanford.ed

    2010-01-15

    The growing investment by governments and electric utilities in energy efficiency programs highlights the need for simple tools to help assess and explain the size of the potential resource. One technique that is commonly used in this effort is to characterize electricity savings in terms of avoided power plants, because it is easier for people to visualize a power plant than it is to understand an abstraction such as billions of kilowatt-hours. Unfortunately, there is no standardization around the characteristics of such power plants. In this letter we define parameters for a standard avoided power plant that have physical meaning and intuitive plausibility, for use in back-of-the-envelope calculations. For the prototypical plant this article settles on a 500 MW existing coal plant operating at a 70% capacity factor with 7% T and D losses. Displacing such a plant for one year would save 3 billion kWh/year at the meter and reduce emissions by 3 million metric tons of CO{sub 2} per year. The proposed name for this metric is the Rosenfeld, in keeping with the tradition among scientists of naming units in honor of the person most responsible for the discovery and widespread adoption of the underlying scientific principle in question-Dr Arthur H Rosenfeld.

  13. Defining a Standard Metric for Electricity Savings

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Marilyn; Akbari, Hashem; Blumstein, Carl; Koomey, Jonathan; Brown, Richard; Calwell, Chris; Carter, Sheryl; Cavanagh, Ralph; Chang, Audrey; Claridge, David; Craig, Paul; Diamond, Rick; Eto, Joseph H.; Fulkerson, William; Gadgil, Ashok; Geller, Howard; Goldemberg, Jose; Goldman, Chuck; Goldstein, David B.; Greenberg, Steve; Hafemeister, David; Harris, Jeff; Harvey, Hal; Heitz, Eric; Hirst, Eric; Hummel, Holmes; Kammen, Dan; Kelly, Henry; Laitner, Skip; Levine, Mark; Lovins, Amory; Masters, Gil; McMahon, James E.; Meier, Alan; Messenger, Michael; Millhone, John; Mills, Evan; Nadel, Steve; Nordman, Bruce; Price, Lynn; Romm, Joe; Ross, Marc; Rufo, Michael; Sathaye, Jayant; Schipper, Lee; Schneider, Stephen H; Sweeney, James L; Verdict, Malcolm; Vorsatz, Diana; Wang, Devra; Weinberg, Carl; Wilk, Richard; Wilson, John; Worrell, Ernst

    2009-03-01

    The growing investment by governments and electric utilities in energy efficiency programs highlights the need for simple tools to help assess and explain the size of the potential resource. One technique that is commonly used in this effort is to characterize electricity savings in terms of avoided power plants, because it is easier for people to visualize a power plant than it is to understand an abstraction such as billions of kilowatt-hours. Unfortunately, there is no standardization around the characteristics of such power plants. In this letter we define parameters for a standard avoided power plant that have physical meaning and intuitive plausibility, for use in back-of-the-envelope calculations. For the prototypical plant this article settles on a 500 MW existing coal plant operating at a 70percent capacity factor with 7percent T&D losses. Displacing such a plant for one year would save 3 billion kW h per year at the meter and reduce emissions by 3 million metric tons of CO2 per year. The proposed name for this metric is the Rosenfeld, in keeping with the tradition among scientists of naming units in honor of the person most responsible for the discovery and widespread adoption of the underlying scientific principle in question--Dr. Arthur H. Rosenfeld.

  14. Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

    Energy Technology Data Exchange (ETDEWEB)

    2010-08-01

    This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  15. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-07-01

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  16. On the methodological approaches to the study of saving behavior of the population

    Directory of Open Access Journals (Sweden)

    Galina Vadimovna Belekhova

    2015-03-01

    Full Text Available The task to ensure effective functioning of all systems in the society and sustainable economic growth requires significant amounts of investment resources, which include savings of the population. This involves identification of the amount of funds accumulated by the population and studies of the characteristics of its saving behavior. The article reveals advantages and disadvantages of the main methodological approaches to the research in saving behavior and gives a comparative analysis of methods on the basis of official statistical information. As for Russia income is a key factor in saving behavior, the article also addresses the problem of assessing the degree of income differentiation of saving behavior. For this purpose we have used a method of household budgets sample surveys on the basis of which we have calculated and analyzed key performance indicators of savings behavior of households, including in the context of groups with different income levels. Unlike previous works on the topic, our study uses available resources (not money income as a basis for the calculation of saving behavior indicators, as they more fully characterize funds of low-income households, which are mostly represented in the budget surveys sample. The performed analysis has helped identify that the degree of the population’s savings differentiation does not yield to the incomes differentiation, and the highest levels of savings and used financial assets belong to the well-to-do group. What is more, the growth in per capita income has not encouraged the poor to save. Thus, in contrast to the well-to-do, increasing the volume of savings in the cost structure, poorer groups direct the major part of funds for consumer needs and different payments. Thus, the share of savings in the overall structure of their income remains practically unchanged. The conclusion emphasizes that sociological methods can be used to study qualitative changes in saving behavior and

  17. 76 FR 31680 - General Reporting and Recordkeeping by Savings Associations and Savings and Loan Holding Companies

    Science.gov (United States)

    2011-06-01

    ... Savings Associations and Savings and Loan Holding Companies AGENCY: Office of Thrift Supervision (OTS... Savings and Loan Holding Companies. OMB Number: 1550-0011. Form Number: N/A. Description: This information...), 12 CFR 562.4 (audit of savings association, savings and loan holding company, or affiliate), 12 CFR...

  18. Energy-Saving in Brew-Rectification

    Directory of Open Access Journals (Sweden)

    N. I. Ulyanau

    2008-01-01

    Full Text Available The paper investigates dynamics of rectification process on one plate of a column. The basic channels controlling brew-rectification process are described in the paper.The paper also considers problems pertaining to synthesis of an adaptive system that controls non-stationary objects with delay. Synthesis of adaptive systems that automatically control product quality and saving on power resources and productivity with the help of the second method of Lyapunov has been carried out in the paper.Industrial introduction of the given automatic control system of technological process shall permit to increase productivity of a rectification (10–15 %, to decrease specific power consumption by (5–10 % while preserving the specified quality of rectified ethyl alcohol and decrease alcohol losses with luting water and malt-residue.

  19. COMPUTER MODELLING OF ENERGY SAVING EFFECTS

    Directory of Open Access Journals (Sweden)

    Marian JANCZAREK

    2016-09-01

    Full Text Available The paper presents the analysis of the dynamics of the heat transfer through the outer wall of the thermal technical spaces, taking into account the impact of the sinusoidal nature of the changes in atmospheric temperature. These temporal variations of the input on the outer surface of the chamber divider result at the output of the sinusoidal change on the inner wall of the room, but suitably suppressed and shifted in phase. Properly selected phase shift is clearly important for saving energy used for the operation associated with the maintenance of a specific regime of heat inside the thermal technical chamber support. Laboratory tests of the model and the actual object allowed for optimal design of the chamber due to the structure of the partition as well as due to the orientation of the geographical location of the chamber.

  20. Alberta Heritage Savings Trust Fund : 1998 annual report

    International Nuclear Information System (INIS)

    1999-01-01

    A review of the Alberta Heritage Savings Trust Fund as it operated under the new investment framework established in 1997 was presented. The new statutory mission of the Fund is to provide stewardship of the savings from Alberta's non-renewable resources by providing the greatest financial returns on those savings for current and future generations of Albertans. In 1998, the Fund earned $947 million in income with nearly $25 million of income being retained to ensure that the value of the Fund grows to off-set the effects of inflation. Net assets of the Fund on March 31, 1998 was $ 12.3 billion. Operation of the Fund, the accounting method used, and details about the Transition Portfolio and the Endowment Portfolio are provided. An assessment of Alberta's economic climate accompanies the auditor's report and the detailed financial statements of the Fund. tabs

  1. Regional politics of energy savings and instruments of its realization

    Directory of Open Access Journals (Sweden)

    Simkiv Lilya Yevgenivna

    2016-02-01

    Full Text Available The article deals with theoretical and methodological foundations and applied aspects of the regional policy of energy saving aimed at the efficient use of energy resources in the region, diversification of energy supplies, modernization of energy infrastructure through the introduction of new technologies and protection of regional interests in the energy sector. The basic approaches and methods for the formation of regional policy of energy saving are determined. It allows deepening and expanding of the basic applied researches, and solving of more complex theoretical and applied problems of regional development. It is mentioned, that the development of regional energy saving policy involves the formation of appropriate legal, financial and credit policy; scientific research, economic, organizational and management measures; advertising and marketing support. It is proved, that for the practical implementation of regional policy the complex combination of economic feasibility, social effectiveness and environmental safety is required.

  2. Private savings and financial modernization in Mexico, 1988-95

    Directory of Open Access Journals (Sweden)

    Julio Lopez G.

    2000-09-01

    Full Text Available The evolution of private savings has attracted a lot of attention in the controversy about the origins of Mexico's 1995 crisis. In this paper the authors analyze the evolution of private savings in Mexico using the theory of effective demand as a framework and making use of econometric estimates. In this context, they analyze the impact of the financial reforms, and in particular the effect of liberalization and deregulation of the financial system on private savings in Mexico from 1980 to 1995. The authors formulate an explanation of the determinants of private savingsand the impact of the strategy of "financial modernization" on private savings, by specifying a model that allows to identify the influence of monetary and credit policies on savings. Then they carry out econometric estimates that lend empirical support to the main conclusions of the theoretical analysis. Their econometric work confirm notably that private savings has been low due to a series of changes in monetary policy that favored the contraction of private demand and led to greater foreign indebtedness.

  3. The impact on energy consumption of daylight saving clock changes

    Energy Technology Data Exchange (ETDEWEB)

    Hill, S.I.; Desobry, F. [Department of Engineering, University of Cambridge (United Kingdom); Garnsey, E.W. [Institute for Manufacturing, University of Cambridge (United Kingdom); Chong, Y.-F. [IPA Energy and Water Consulting (United Kingdom)

    2010-09-15

    The focus of this work is an investigation of the effect of prevailing time regime on energy consumption. In particular we perform analysis demonstrating potential energy savings which could be obtained were Great Britain to maintain daylight savings time (DST) over winter, instead of reverting to Greenwich mean time (GMT). We review the literature on the effect of DST on energy consumption and show that this indicates a justification for considering the issue. Our headline result is in agreement with many related studies in that advancing the clock by an hour in winter would lead to energy savings of at least 0.3% of daily demand in Great Britain. In deriving this result we have adopted methodologies currently used in load prediction, in particular Support Vector Regression, to estimate energy demand on a half-hourly basis. Corresponding cost savings are found to be higher (due to the nonlinear increase of costs) and we find them to be on the order of 0.6% over the months considered. In terms of environmental impact we find the saving to be approximately equivalent to 450,000 ton of CO{sub 2}. In deriving these results we adopt a conservative approach such that we consider them lower bounds on any true savings. (author)

  4. The impact on energy consumption of daylight saving clock changes

    International Nuclear Information System (INIS)

    Hill, S.I.; Desobry, F.; Garnsey, E.W.; Chong, Y.-F.

    2010-01-01

    The focus of this work is an investigation of the effect of prevailing time regime on energy consumption. In particular we perform analysis demonstrating potential energy savings which could be obtained were Great Britain to maintain daylight savings time (DST) over winter, instead of reverting to Greenwich mean time (GMT). We review the literature on the effect of DST on energy consumption and show that this indicates a justification for considering the issue. Our headline result is in agreement with many related studies in that advancing the clock by an hour in winter would lead to energy savings of at least 0.3% of daily demand in Great Britain. In deriving this result we have adopted methodologies currently used in load prediction, in particular Support Vector Regression, to estimate energy demand on a half-hourly basis. Corresponding cost savings are found to be higher (due to the nonlinear increase of costs) and we find them to be on the order of 0.6% over the months considered. In terms of environmental impact we find the saving to be approximately equivalent to 450,000 ton of CO 2 . In deriving these results we adopt a conservative approach such that we consider them lower bounds on any true savings.

  5. 21 Cost-Saving Measures For The Judiciary

    Directory of Open Access Journals (Sweden)

    Jessica Vapnek

    2013-02-01

    Full Text Available Courts around the world are increasingly facing budget cuts and funding shortfalls. Budget problems are particularly acute in developing countries, where courts need to increase efficiency and access to justice while also managing resource limitations. International development agencies and donors expect measurable progress to justify continued funding of judicial reform projects. Yet, as rule of law efforts in developing countries improve public perception of courts and streamline court administration, more cases may be filed. Greater use of the courts puts greater strain on court resources, triggering the need to implement cost-saving measures while maintaining effective court administration.This paper outlines 21 measures that courts can implement to reduce costs. Specific examples from developing countries are presented wherever possible, with additional examples drawn from the United States and Europe. Although this paper is intended mainly for audiences in developing countries, the issues facing those courts are similar to issues addressed through court reforms in the United States over the past 50 years. For this reason, examples of cost-saving measures from developed countries such as the United States may be directly applicable or could be used as starting points to spur further cost savings innovation in the developing world.Section I of this paper explains the context for the implementation of judicial cost-saving measures, and raises some issues for reflection. Section II sets out specific judicial cost-saving measures, dividing them into three categories: measures that address court operations; measures directed at staffing and salaries; and measures that relate to court and case management. Section III discusses ways that countries and judiciaries can generate ideas for new and innovative cost-saving mechanisms.

  6. Compact fluorescent lamps, innovation for electricity saving; Lamparas fluorescentes compactas, innovacion para el ahorro de electricidad

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, Fernando [Fideicomiso para el Ahorro de Energia Electrica (Mexico); Camacho P, Wendolin E; Villalobos Alarcon, German [Phillips Lighting Mexico (Mexico)

    2007-01-15

    An extremely important resource is electricity because it has provided illumination for homes, buildings and cities in the absence of natural light. Therefore, the human being is considering to save this valuable resource by using sophisticated light bulbs. At the end of the 70's the compact fluorescent lamps appeared. In this article we can disclose the advantages and disadvantages of this technology, and how some years later of its invention, those lamps satisfied the client expectations, due to its cost, electricity saving, longer lifetime, use possibilities, and technological improvements. We can also know how Federal Electricity Commission (CFE) and The Trust Fund for Electric Energy Savings (FIDE) supported a project to favor these lamps to be in the Mexican market. [Spanish] La electricidad es un recurso de suma importancia porque ha contribuido a la iluminacion de casas, edificios y ciudades, ante la ausencia de luz natural, es por ello que se ha buscado ahorrar este recurso tan preciado con el uso de lamparas sofisticadas. Una tecnologia que aparecio a finales de los anos 70 fueron las lamparas fluorescentes compactas. En este articulo encontramos sus ventajas y desventajas, y como despues de algunos anos de su creacion comenzaron a llenar las expectativas del cliente gracias a su costo, ahorro de electricidad, mayor tiempo de vida, posibilidades de aplicacion y mejoras tecnologicas. Asi mismo podemos conocer, el proyecto que se hizo para que esta tecnologia entrara al mercado mexicano, con el apoyo de la Comision Federal de Electricidad (CFE) y del Fideicomiso para el Ahorro de Energia Electrica (FIDE).

  7. FY 1997 cost savings report

    International Nuclear Information System (INIS)

    Sellards, J.B.

    1998-01-01

    With the end of the cold war, funding for the Environmental Management program increased rapidly as nuclear weapons production facilities were shut down, cleanup responsibilities increased, and facilities were transferred to the cleanup program. As funding for the Environmental Management (EM) program began to level off in response to Administration and Congressional efforts to balance the Federal budget, the program redoubled its efforts to increase efficiency and get more productivity out of every dollar. Cost savings and enhanced performance are an integral pair of Hanford Site operations. FY1997 was the third year of a cost savings program that was initially defined in FY 1995. The definitions and process remained virtually the same as those used in FY 1996

  8. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  9. Energy saving behaviours: Development of a practice-based model

    International Nuclear Information System (INIS)

    Sweeney, Jillian C.; Kresling, Johannes; Webb, Dave; Soutar, Geoffrey N.; Mazzarol, Tim

    2013-01-01

    Financial pressure and concern for the environment has meant many consumers are aware of the need to reduce their consumption of many resources, including energy, which is the focus of the present study. While potential energy use deterrents in the form of access constraints and price increases are forms of extrinsic control, it is not clear how effective these are at reducing consumption and, indeed, it is not clear if such measures are consistent with people's underlying energy saving motivations. Beyond behavioural motivations, people's desires to reduce energy can be thwarted (barriers) and/or supported by a variety of factors, some within their control, while others are perhaps less so. Using a practice-based framework and a qualitative focus group approach, this study presents an exploratory study of these issues. Policy suggestions for overcoming barriers, as well suggestions as to how energy saving behaviours can be supported are offered. - Highlights: • We obtained consumers views about energy saving motivations, barriers and support. • Attitudes towards energy saving are not sufficient to change behaviours. • A practice-based approach to understanding energy saving behaviours is applied. • A practice-based energy-cultures framework (PBECF) is developed. • Barriers and support factors are identified that can be conceptualised within a PBECF

  10. Cost savings through innovative technologies

    International Nuclear Information System (INIS)

    Lankford, J.M.; Jackson, J.P.

    1995-01-01

    Newly developed technologies can and already are saving money. Other technologies under development will provide solutions to problems which are currently impossible or too expensive to address, and still others will offer alternative strategies where baseline approaches are not acceptable to the public. All of these options will be considered as the nation decides what it wishes to accomplish, and fund, to clean up the nuclear weapons complex

  11. Effects of heat and electricity saving measures in district-heated multistory residential buildings

    International Nuclear Information System (INIS)

    Truong, Nguyen Le; Dodoo, Ambrose; Gustavsson, Leif

    2014-01-01

    Highlights: • We analyzed the potential for energy savings in district heated buildings. • Measures that reduce more peak load production give higher primary energy savings. • Efficient appliances increase heat demand but give net primary energy savings. • Efficient appliances give the largest net primary energy savings. - Abstract: The effects of heat and electricity saving measures in district-heated buildings can be complex because these depend not only on how energy is used on the demand side but also on how energy is provided from the supply side. In this study, we analyze the effects of heat and electricity saving measures in multistory concrete-framed and wood-framed versions of an existing district-heated building and examine the impacts of the reduced energy demand on different district heat (DH) production configurations. The energy saving measures considered are for domestic hot water reduction, building thermal envelope improvement, ventilation heat recovery (VHR), and household electricity savings. Our analysis is based on a measured heat load profile of an existing DH production system in Växjö, Sweden. Based on the measured heat load profile, we model three minimum-cost DH production system using plausible environmental and socio-political scenarios. Then, we investigate the primary energy implications of the energy saving measures applied to the two versions of the existing building, taking into account the changed DH demand, changed cogenerated electricity, and changed electricity use due to heat and electricity saving measures. Our results show that the difference between the final and primary energy savings of the concrete-framed and wood-framed versions of the case-study building is minor. The primary energy efficiency of the energy saving measures depends on the type of measure and on the composition of the DH production system. Of the various energy saving measures explored, electricity savings give the highest primary energy savings

  12. RESOURCE-SAVING TECHNOLOGY OF CONSTRUCTION MACHINERY OPERATION

    Directory of Open Access Journals (Sweden)

    Fedosov Sergej Viktorovich

    2012-10-01

    Depending on the type of membranes and the degree of used oil treatment, recovered oil may be applied for the initially designated purpose, as an additive injected into diesel fuel or delivered to major oil recovery facilities, although the latter purpose requires preliminary improvement of physical and chemical properties of used oil to assure its complete recovery.

  13. Energy and resource saving raw materials for dactyloscopy

    Directory of Open Access Journals (Sweden)

    Ikonnikova Lyubov F.

    2014-01-01

    Full Text Available The “developing” properties of ferromagnetic fingerprint powders are defined by the chemical nature and the particle sizes of the pigment which form acidity of its surface, adhesive and magnetic properties, and color spectrum. The optimum ratio of these physical and chemical parameters is observed in the pigment consisting of iron-containing sludge tempered at 800°C, which contains α-Fe2O3 and impurity of clay materials.

  14. New wastewater treatment concepts towards energy saving and resource recovery

    NARCIS (Netherlands)

    Khiewwijit, R.

    2016-01-01

    At present, conventional activated sludge (CAS) systems are widely applied to treat municipal wastewater. The main advantages of CAS systems are that they are robust and generally produce an effluent quality that meets the discharge guidelines. However, CAS systems cannot be considered sustainable

  15. Products of steel slags an opportunity to save natural resources.

    Science.gov (United States)

    Motz, H; Geiseler, J

    2001-01-01

    In Germany, and in the most industrial countries, the use of blast furnace and steel slags as an aggregate for civil engineering, for metallurgical use and as fertiliser has a very long tradition. Since the introduction of the basic oxygen steel making furnace (BOF) process and the electric arc furnace (EAF) process the German steel industry started extensive research on the development of fields of application for BOF and EAF slags. These investigations have been mainly performed by Forschungsgemeinschaft Eisenhüttenschlacken e. V. (FEhS), the Research Association for blast furnace and steel slags. Today steel slags are well characterised and long-term experienced materials mainly used as aggregates for road construction (e.g. asphaltic or unbound layers), as armour-stones for hydraulic engineering constructions (e.g. stabilisation of shores), and as fertiliser for agriculture purposes. These multifarious fields of application could only be achieved because the steelworks influence the quality of slags by a careful selection of raw materials and a suitable process route. Furthermore, subsequent procedures like a treatment of the liquid slag, an appropriate heat treatment and a suitable processing have been developed to ensure that the quality of steel slags is always adequate for the end use. Depending on the respective field of application, the suitability of steel slags has to be proven by determining the technical properties, as well as the environmental compatibility. For this reason test methods have been developed to evaluate the technical properties especially the volume stability and the environmental behaviour. To evaluate the volume stability a suitable test (steam test) has been developed and the results from laboratory tests were compared with the behaviour of steel slags under practical conditions, e.g. in a road. To determine the environmental behaviour leaching tests have been developed. In the meanwhile most of these test methods are drafted or already accepted as a CEN standard and are used for a continuous quality control. Usually the suitability of steel slags is stated by fulfilling the requirements of national and/or international standards and regulations. Based on these standards and regulations in Germany in 1998 about 97% of the produced steel slags have been used as aggregates for road construction (e.g. as surface layer, road base and sub base for high trafficked roads), ways, earthworks, and armourstones for hydraulic structures. Consistent to the successful long-term experience not only products of steel slags but also products of blast furnace slags have been eliminated from the European Waste Catalogue and the European Shipment of Waste Regulation of the European Community, as well as from the lists of OECD for transfrontier movements by the decision of the OECD-Council from 21 September, 1995.

  16. Alternative Fuels Data Center: National Park Saves Natural Resources with

    Science.gov (United States)

    Oct. 7, 2017 Photo of a truck Phoenix Utility Fleet Drives Smarter with Biodiesel Aug. 26, 2017 Photo Powers Biodiesel Vehicles in Rhode Island July 14, 2017 Photo of a truck Idaho Transports Mail and on Biodiesel in North Carolina June 9, 2017 Photo of a bus New Hampshire Cleans up with Biodiesel

  17. Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

    Science.gov (United States)

    Gosman, Nathaniel

    For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

  18. Evalutation of retrofitting strategies for energy savings in Brazilian hotels

    NARCIS (Netherlands)

    Cademartori, E.; Mutani, G.; Costola, D.; Hensen, J.L.M.

    2012-01-01

    ABSTRACT. A strong increase of hospitality infrastructure is taking place in Brazil due to imminent international events. In order to understand energy saving potential of this sector, an existing business hotel in Goiania, a mid-western Brazilian metropolis, was analyzed as case study taking into

  19. 24 CFR 221.1 - Savings clause.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Savings clause. 221.1 Section 221.1... MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES LOW COST AND MODERATE INCOME MORTGAGE INSURANCE-SAVINGS CLAUSE Eligibility Requirements-Low Cost Homes-Savings Clause § 221.1...

  20. Consumer behaviours: Teaching children to save energy

    Science.gov (United States)

    Grønhøj, Alice

    2016-08-01

    Energy-saving programmes are increasingly targeted at children to encourage household energy conservation. A study involving the assignment of energy-saving interventions to Girl Scouts shows that a child-focused intervention can improve energy-saving behaviours among children and their parents.

  1. A Bio-inspired Approach for Power and Performance Aware Resource Allocation in Clouds

    Directory of Open Access Journals (Sweden)

    Kumar Rajesh

    2016-01-01

    Full Text Available In order to cope with increasing demand, cloud market players such as Amazon, Microsoft, Google, Gogrid, Flexiant, etc. have set up large sized data centers. Due to monotonically increasing size of data centers and heterogeneity of resources have made resource allocation a challenging task. A large percentage of total energy consumption of the data centers gets wasted because of under-utilization of resources. Thus, there is a need of resource allocation technique that improves the utilization of resources with effecting performance of services being delivered to end users. In this work, a bio-inspired resource allocation approach is proposed with the aim to improve utilization and hence the energy efficiency of the cloud infrastructure. The proposed approach makes use of Cuckoo search for power and performance aware allocation of resources to the services hired by the end users. The proposed approach is implemented in CloudSim. The simulation results have shown approximately 12% saving in energy consumption.

  2. Energy Savings for Solar Heating Systems

    DEFF Research Database (Denmark)

    Thür, Alexander; Furbo, Simon; Shah, Louise Jivan

    2004-01-01

    , various simulations of solar heating systems were done for different hot water demands and collector sizes. The result shows that the potential of fuel reduction can be much higher than the solar gain of the solar thermal system. For some conditions the fuel reduction can be up to the double of the solar......In this paper the realistic behaviour and efficiency of heating systems were analysed, based on long term monitoring projects. Based on the measurements a boiler model was evaluated. Comparisons of measured and calculated fuel consumptions showed a good degree of similarity. With the boiler model...... gain due to a strong increase of the system efficiency. As the monitored boilers were not older than 3 years, it can be assumed that the saving potential with older boilers could be even higher than calculated in this paper....

  3. Energy Savings for Solar Heating Systems

    DEFF Research Database (Denmark)

    Thür, Alexander; Furbo, Simon; Shah, Louise Jivan

    2006-01-01

    showed a good degree of similarity. With the boiler model, various simulations of solar domestic hot water heating systems were done for different hot water demands and collector sizes. The result shows that the potential of fuel reduction can be much higher than the solar gain of the solar thermal...... system. For some conditions the fuel reduction can be up to the double of the solar gain due to a strong increase of the system efficiency. As the monitored boilers were not older than 3 years, it can be assumed that the saving potential with older boilers could be even higher than calculated......In this paper the realistic behaviour and efficiency of heating systems were analysed, based on long term monitoring projects. Based on the measurements a boiler model used to calculate the boiler efficiency on a monthly basis was evaluated. Comparisons of measured and calculated fuel consumptions...

  4. Energy saving consulting in Hamburg

    Energy Technology Data Exchange (ETDEWEB)

    1982-10-01

    For anyone who wants to realise the dream of his own house, the terms of thermal insulation and saving heating plant should be central in planning this. One needs advice from experts for this. A survey of the many consultants offices available in Hamburg is provided. The list was compiled with the assistance of the Hamburg Chamber of Commerce and the Hamburg Trades Council and of professional associations. The information on the special fields of activity of the named consultants is based on their statements.

  5. Medical savings accounts make waves.

    Science.gov (United States)

    Gardner, J

    1995-02-27

    MSAs: the theory. Medical savings account legislation would allow consumers to set aside pre-tax dollars to pay for day-to-day healthcare costs. The accounts are to be backed up by a catastropic policy with a deductible roughly equal to the maximum amount allowed in the MSA. The aim is to reduce healthcare cost inflation by making consumers more aware of the costs of healthcare than they are under comprehensive policies and enabling them to shop for the lowest-cost, highest-quality care.

  6. Student saving, does it exist? : A study of students' saving behavior, attitude towards saving and motivation to save.

    OpenAIRE

    Tuvesson, Joakim; Yu, Shiyu

    2011-01-01

    Swedish households are getting deeper in debt and house prices keeps on rising. This is what happened in USA and it was one of the major causes of the recent financial crisis. To avoid a similar crisis in Sweden we think one part of the solution is to make sure that those who are students today and soon will get jobs, buy houses, take loans etcetera have necessary knowledge to do so. Students’ saving is an area that almost completely lacked researchers’ attention, and one goal with this thesi...

  7. Value of travel time savings

    DEFF Research Database (Denmark)

    Le Masurier, P.; Polak, J.; Pawlak, Janet

    2015-01-01

    A team of specialist market researchers and Value of Time experts comprising members from SYSTRA, Imperial College London and the Technical University of Denmark has conducted a formal audit and peer review of research undertaken by Arup/ITS Leeds/Accent to derive Value of Travel Time Savings...... Preference (RP) models that were used to derive final Values of Travel Time (VTT). This report contains the findings of our audit and peer review of the procedures adopted by the research team during data collection of the three surveys (SP, RP and Employers Surveys); a peer review of the reported approach...

  8. Connecting possibilistic prudence and optimal saving

    Directory of Open Access Journals (Sweden)

    Ana María Lucia Casademunt

    2013-12-01

    Full Text Available In this paper we study the optimal saving problem in the framework of possibility theory. The notion of possibilistic precautionary saving is introduced as a measure of the way the presence of possibilistic risk (represented by a fuzzy number influences a consumer in establishing the level of optimal saving. The notion of prudence of an agent in the face of possibilistic risk is defined and the equivalence between the prudence condition and a positive possibilistic precautionary saving is proved. Some relations between possibilistic risk aversion, prudence and possibilistic precautionary saving were established.

  9. Energy Savings Measure Packages. Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-11-01

    This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the United States. These packages are optimized for minimum cost to homeowners for source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home; this typically amounts to $300 - $700/year.

  10. Making the results of bottom-up energy savings comparable

    Directory of Open Access Journals (Sweden)

    Moser Simon

    2012-01-01

    Full Text Available The Energy Service Directive (ESD has pushed forward the issue of energy savings calculations without clarifying the methodological basis. Savings achieved in the Member States are calculated with rather non-transparent and hardly comparable Bottom-up (BU methods. This paper develops the idea of parallel evaluation tracks separating the Member States’ issue of ESD verification and comparable savings calculations. Comparability is ensured by developing a standardised BU calculation kernel for different energy efficiency improvement (EEI actions which simultaneously depicts the different calculation options in a structured way (e.g. baseline definition, system boundaries, double counting. Due to the heterogeneity of BU calculations the approach requires a central database where Member States feed in input data on BU actions according to a predefined structure. The paper demonstrates the proposed approach including a concrete example of application.

  11. Energy savings in the Danish building stock until 2050

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Kragh, Jesper

    2014-01-01

    are energy upgraded according to the requirements stipulated in the Danish Building Regulations 2010. Furthermore, scenario analyses was made for the potential impact on the energy consumption of introducing different levels of tightening of the energy requirements for existing buildings in the Danish...... Building Regulations. Compliance with the requirements in the Danish Building Regulations will potentially result in energy savings for space heating and domestic hot water around 30 % until 2050. Further tightening of the component insulation level requirements will only result in marginally higher......A study has been conducted analysing the energy savings for space heating and domestic hot water in the Danish building stock due to renovation of building components at the end of their service life. The purpose of the study was to estimate the energy savings until 2050 as building components...

  12. Does energy labelling on residential housing cause energy savings?

    Energy Technology Data Exchange (ETDEWEB)

    Kjaerbye, V.H.

    2009-07-01

    Danish households use more than 30% of the total amount of energy being used in Denmark. More than 80% of this energy is dedicated to space heating. The same relation is seen in many OECD countries. The corresponding energy savings potential was recently estimated at 30% of the energy used in buildings. Energy labelling is seen as an important instrument to target these potential energy savings. This paper evaluates the effects of the Danish Energy Labelling Scheme on energy consumption in existing single-family houses with propensity score matching using real metered natural gas consumption and a very wide range of register data describing the houses and households. The study did not find significant energy savings due to the Danish Energy Labelling Scheme, but more research would be needed to complement this conclusion

  13. Revisiting Rebound Effects from Material Resource Use. Indications for Germany Considering Social Heterogeneity

    Directory of Open Access Journals (Sweden)

    Johannes Buhl

    2014-02-01

    Full Text Available In contrast to the original investigation by William Stanley Jevons, compensations of energy savings due to improved energy efficiency are mostly analyzed by providing energy consumption or greenhouse gas emissions. In support of a sustainable resource management, this paper analyzes so-called rebound effects based on resource use. Material flows and associated expenditures by households allow for calculating resource intensities and marginal propensities to consume. Marginal propensities to consume are estimated from data of the German Socio-Economic Panel (SOEP in order to account for indirect rebound effects for food, housing and mobility. Resource intensities are estimated in terms of total material requirements per household final consumption expenditures along the Classification of Individual Consumption according to Purpose (COICOP. Eventually, rebound effects are indicated on the basis of published saving scenarios in resource and energy demand for Germany. In sum, compensations due to rebound effects are lowest for food while the highest compensations are induced for mobility. This is foremost the result of a relatively high resource intensity of food and a relatively low resource intensity in mobility. Findings are provided by giving various propensity scenarios in order to cope with income differences in Germany. The author concludes that policies on resource conservation need to reconsider rebound effects under the aspect of social heterogeneity.

  14. Risk transfer via energy-savings insurance

    International Nuclear Information System (INIS)

    Mills, Evan

    2003-01-01

    Among the key barriers to investment in energy efficiency are uncertainties about attaining projected energy savings and potential disputes over stipulated savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building diagnostics and commissioning), financial methods are less developed in the energy management arena than in other segments of the economy. Energy-savings insurance (ESI) - formal insurance of predicted energy savings - transfers and spreads both types of risk over a larger pool of energy efficiency projects and reduces barriers to market entry of smaller energy service firms who lack sufficiently strong balance sheets to self-insure the savings. ESI encourages those implementing energy-saving projects to go beyond standard measures and thereby achieve more significant levels of energy savings. Insurance providers are proponents of improved savings measurement and verification techniques, as well as maintenance, thereby contributing to national energy-saving objectives. If properly applied, ESI can potentially reduce the net cost of energy-saving projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Governmental agencies have been pioneers in the use of ESI and could continue to play a role

  15. Federal Aviation Administration retained savings program proposal

    International Nuclear Information System (INIS)

    Hostick, D.J.; Larson, L.L.; Hostick, C.J.

    1998-03-01

    Federal legislation allows federal agencies to retain up to 50% of the savings associated with implementing energy efficiency and water conservation measures and practices. Given budget pressures to reduce expenditures, the use of retained savings to fund additional projects represents a source of funds outside of the traditional budget cycle. The Southwest Region Federal Aviation Administration (FAA) has tasked Pacific Northwest National Laboratory (PNNL) to develop a model retained savings program for Southwest Region FAA use and as a prototype for consideration by the FAA. PNNL recommends the following steps be taken in developing a Southwest Region FAA retained savings program: Establish a retained savings mechanism. Determine the level at which the retained savings should be consolidated into a fund. The preliminary recommendation is to establish a revolving efficiency loan fund at the regional level. Such a mechanism allows some consolidation of savings to fund larger projects, while maintaining a sense of facility ownership in that the funds will remain within the region

  16. Energy saving synergies in national energy systems

    DEFF Research Database (Denmark)

    Thellufsen, Jakob Zinck; Lund, Henrik

    2015-01-01

    In the transition towards a 100% renewable energy system, energy savings are essential. The possibility of energy savings through conservation or efficiency increases can be identified in, for instance, the heating and electricity sectors, in industry, and in transport. Several studies point...... to various optimal levels of savings in the different sectors of the energy system. However, these studies do not investigate the idea of energy savings being system dependent. This paper argues that such system dependency is critical to understand, as it does not make sense to analyse an energy saving...... without taking into account the actual benefit of the saving in relation to the energy system. The study therefore identifies a need to understand how saving methods may interact with each other and the system in which they are conducted. By using energy system analysis to do hourly simulation...

  17. Saving in cycles: how to get people to save more money.

    Science.gov (United States)

    Tam, Leona; Dholakia, Utpal

    2014-02-01

    Low personal savings rates are an important social issue in the United States. We propose and test one particular method to get people to save more money that is based on the cyclical time orientation. In contrast to conventional, popular methods that encourage individuals to ignore past mistakes, focus on the future, and set goals to save money, our proposed method frames the savings task in cyclical terms, emphasizing the present. Across the studies, individuals who used our proposed cyclical savings method, compared with individuals who used a linear savings method, provided an average of 74% higher savings estimates and saved an average of 78% more money. We also found that the cyclical savings method was more efficacious because it increased implementation planning and lowered future optimism regarding saving money.

  18. Income inequality, status seeking, and savings rates in Canada

    Directory of Open Access Journals (Sweden)

    Alexander Bilson Darku

    2014-12-01

    Full Text Available This paper uses Canadian provincial-level data and a variant of James uesenberry’s relative income hypothesis proposed by Frank et al. (2010 to examine the relationship between income inequality and savings rates. The theory predicts that increased expenditure of top income earners leads those just below them in the income scale to spend more as well, then the next group also spends more, and so on. This phenomenon is due to people’s status seeking behaviour. Hence, increased income inequality will trigger increases in consumption by individuals in all income groups, which in turn leads to declining personal savings rates. The empirical analysis based on this theory led to some interesting findings. First, at the national level, increased income inequality has a significant negative effect on personal savings rates. At the provincial level, the relationship also emerges in eight of ten provinces. Second, both the national and provincial results imply that growth in per capita income that worsens income inequality impacts negatively on personal savings rates. I interpret the results as evidence that social factors such as status-seeking generate consumption interdependence and are significant determinants of consumption and savings decisions of Canadians.

  19. Short-term indicators. Intensities as a proxy for savings

    Energy Technology Data Exchange (ETDEWEB)

    Boonekamp, P.G.M.; Gerdes, J. [ECN Policy Studies, Petten (Netherlands); Faberi, S. [Institute of Studies for the Integration of Systems ISIS, Rome (Italy)

    2013-12-15

    The ODYSSEE database on energy efficiency indicators (www.odyssee-indicators.org) has been set up to enable the monitoring and evaluation of realised energy efficiency improvements and related energy savings. The database covers the 27 EU countries as well as Norway and Croatia and data are available from 1990 on. This work contributes to the growing need for quantitative monitoring and evaluation of the impacts of energy policies and measures, both at the EU and national level, e.g. due to the Energy Services Directive and the proposed Energy Efficiency Directive. Because the underlying data become available only after some time, the savings figures are not always timely available. This is especially true for the ODEX efficiency indices per sector that rely on a number of indicators. Therefore, there is a need for so-called short-term indicators that become available shortly after the year has passed for which data are needed. The short term indicators do not replace the savings indicators but function as a proxy for the savings in the most recent year. This proxy value is faster available, but will be less accurate than the saving indicators themselves. The short term indicators have to be checked regularly with the ODEX indicators in order to see whether they can function still as a proxy.

  20. Evaluating energy saving system of data centers based on AHP and fuzzy comprehensive evaluation model

    Science.gov (United States)

    Jiang, Yingni

    2018-03-01

    Due to the high energy consumption of communication, energy saving of data centers must be enforced. But the lack of evaluation mechanisms has restrained the process on energy saving construction of data centers. In this paper, energy saving evaluation index system of data centers was constructed on the basis of clarifying the influence factors. Based on the evaluation index system, analytical hierarchy process was used to determine the weights of the evaluation indexes. Subsequently, a three-grade fuzzy comprehensive evaluation model was constructed to evaluate the energy saving system of data centers.

  1. SAVE ENERGY IN TEXTILE SMES

    Directory of Open Access Journals (Sweden)

    SCALIA Mauro

    2016-05-01

    Full Text Available Efficiency and competitiveness in textile and clothing manufacturing sector must take into account the current and future energy challenges. Energy efficiency is a subject of critical importance for the Textile & Clothing industry, for other sectors and for the society in general. EURATEX has initiated Energy Made-to-Measure, an information campaign running until 2016 to empower over 300 textile & clothing companies, notably SMEs, to become more energy efficient. SET( Save Energy in Textile SMEs a collaborative project co-funded within the European Programme Intelligent Energy Europe II helps companies to understand their energy consumption and allows them to compare the sector benchmarks in different production processes. SET has developed the SET tool, Energy Saving and Efficiency Tool, a free of charge tool customized for textile manufacturers. The SET tool is made up of 4 elements: a stand-alone software (SET Tool for self-assessment based on an Excel application; an on-line part (SET tool Web for advanced benchmarking and comparison of the performances across years; a guiding document for the companies and overview of financial incentives and legal obligations regarding energy efficiency. Designed specifically for small and medium enterprises (SMEs, the SET tool enables the evaluation of energy consumption and recommends measures to reduce the consumption. Prior to modifying the company’s production processes and making investments to increase energy efficiency, textile SMEs need to get different type of information, including legal context, economic and technical peculiarities.

  2. Resource conservation management

    International Nuclear Information System (INIS)

    Miller, W.

    1999-01-01

    Resource conservation management is a management program similar to financial management in that its success requires commitment by all levels of the organization to the process as well as an accounting procedure and auditing of critical components. Resource conservation management provides a framework for all elements of efficient building operations and maintenance. The savings connected with the program are principally connected with changes in the way buildings are operated and maintained. Given the reduction in rebates for the installation of energy-efficient equipment, this approach has considerable promise. This paper discusses the evolution of the resource conservation management service and the savings associated with a two-year pilot effort with seven school districts, as well as the critical components of a successful program

  3. Mission aware energy saving strategies for Army ground vehicles

    Science.gov (United States)

    Dattathreya, Macam S.

    Fuel energy is a basic necessity for this planet and the modern technology to perform many activities on earth. On the other hand, quadrupled automotive vehicle usage by the commercial industry and military has increased fuel consumption. Military readiness of Army ground vehicles is very important for a country to protect its people and resources. Fuel energy is a major requirement for Army ground vehicles. According to a report, a department of defense has spent nearly $13.6 billion on fuel and electricity to conduct ground missions. On the contrary, energy availability on this plant is slowly decreasing. Therefore, saving energy in Army ground vehicles is very important. Army ground vehicles are embedded with numerous electronic systems to conduct missions such as silent and normal stationary surveillance missions. Increasing electrical energy consumption of these systems is influencing higher fuel consumption of the vehicle. To save energy, the vehicles can use any of the existing techniques, but they require complex, expensive, and time consuming implementations. Therefore, cheaper and simpler approaches are required. In addition, the solutions have to save energy according to mission needs and also overcome size and weight constraints of the vehicle. Existing research in the current literature do not have any mission aware approaches to save energy. This dissertation research proposes mission aware online energy saving strategies for stationary Army ground vehicles to save energy as well as to meet the electrical needs of the vehicle during surveillance missions. The research also proposes theoretical models of surveillance missions, fuzzy logic models of engine and alternator efficiency data, and fuzzy logic algorithms. Based on these models, two energy saving strategies are proposed for silent and normal surveillance type of missions. During silent mission, the engine is on and batteries power the systems. During normal surveillance mission, the engine is

  4. Carbon savings resulting from the cooling effect of green areas: A case study in Beijing

    International Nuclear Information System (INIS)

    Lin Wenqi; Wu Tinghai; Zhang Chengguo; Yu Ting

    2011-01-01

    Green areas cool the climate of a city, reduce the energy consumption caused by the urban heat island (UHI) effect, and bring along carbon savings. However, the calculation of carbon savings due to the cooling effect of green areas is still not well understood. We have used a Landsat Enhanced Thematic Mapper Plus (ETM+) image of Beijing, to identify the cooled areas, compute the possible energy used to maintain the temperature differences between cooled areas and their surrounding heated areas, and calculate the carbon savings owing to the avoidance of energy use. Results show that a total amount of 14315.37 tons carbon savings was achieved in the study area and the amount was related to the biomass, the size and the shape of green areas. These results demonstrate the importance of carbon savings resulting from green areas' cooling effect. - Highlights: → We provide an integral equation for the calculation of energy conservation and carbon savings. → We show that carbon savings is partly influenced by green areas' features. → A strong correlation between biomass, size and shape of green areas and carbon savings. - An integral equation for the calculation of energy conservation and carbon savings; Showing that carbon savings is partly influenced by green areas' features.

  5. Save Energy Now Assessments Results 2008 Detailed Report

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Anthony L [ORNL; Martin, Michaela A [ORNL; Nimbalkar, Sachin U [ORNL; Quinn, James [U.S. Department of Energy; Glatt, Ms. Sandy [DOE Industrial Technologies Program; Orthwein, Mr. Bill [U.S. Department of Energy

    2010-09-01

    In October 2005, U.S. Department of Energy Secretary Bodman launched his Easy Ways to Save Energy campaign with a promise to provide energy assessments to 200 of the largest U.S. manufacturing plants. DOE's Industrial Technologies Program (ITP) responded to the Secretary's campaign with its Save Energy Now initiative, featuring a new and highly cost-effective form of energy savings assessment. The approach for these assessments drew heavily on the existing resources of ITP's technology delivery component. Over the years, ITP Technology Delivery has worked with industry partners to assemble a suite of respected software tools, proven assessment protocols, training curricula, certified energy experts, and strong partnerships for deployment. The Save Energy Now assessments conducted in calendar year 2006 focused on natural gas savings and targeted many of the nation's largest manufacturing plants - those that consume at least 1 TBtu of energy annually. The 2006 Save Energy Now assessments focused primarily on assessments of steam and process heating systems, which account for an estimated 74% of all natural gas use by U.S. manufacturing plants. Because of the success of the Save Energy Now assessments conducted in 2006 and 2007, the program was expanded and enhanced in two major ways in 2008: (1) a new goal was set to perform at least 260 assessments; and (2) the assessment focus was expanded to include pumping, compressed air, and fan systems in addition to steam and process heating. DOE ITP also has developed software tools to assess energy efficiency improvement opportunities in pumping, compressed air, and fan systems. The Save Energy Now assessments integrate a strong training component designed to teach industrial plant personnel how to use DOE's opportunity assessment software tools. This approach has the advantages of promoting strong buy-in of plant personnel for the assessment and its outcomes and preparing them better to

  6. Potential for Potable Water Savings in Buildings by Using Stormwater Harvested from Porous Pavements

    Directory of Open Access Journals (Sweden)

    Lucas Niehuns Antunes

    2016-03-01

    Full Text Available There is a growing concern about the scarcity of water resources due to population growth and increased demand for potable water. Thus, the rational use of water has become necessary for the conservation of such resources. The objective of this study is to estimate the potential for potable water savings in buildings of different sectors—residential, public and commercial—in the city of Florianópolis, southern Brazil, by using stormwater harvested from porous pavements. Models were constructed to assess infiltration and rainwater quality; samples of stormwater from a local road were collected to evaluate its quality; and computer simulation was performed to assess the potential for potable water savings and rainwater tank sizing. Draining asphalt concrete slabs with two types of modifiers were used, i.e., tire rubber and SBS polymer—styrene-butadiene-styrene. The Netuno computer programme was used to simulate the potential for potable water savings considering the use of rainwater for non-potable uses such as flushing toilets and urinals, cleaning external areas, and garden watering. Average stormwater infiltration was 85.4%. It was observed that stormwater is not completely pure. From the models, the pH was 5.4 and the concentrations of ammonia, phosphorus, nitrite, and dissolved oxygen were 0.41, 0.14, 0.002, and 9.0 mg/L, respectively. The results for the stormwater runoff of a paved road were 0.23, 0.11, 0.12, 0.08, 1.41, 2.11, 0.02, and 9.0 mg/L for the parameters aluminium, ammonia, copper, chromium, iron, phosphorus, nitrite, and dissolved oxygen, respectively; and the pH was 6.7. In the city of Florianópolis, which has a surface area of paved roads of approximately 11,044,216 m², the potential for potable water savings ranged from 1.2% to 19.4% in the residential sector, 2.1% to 75.7% in the public sector and 6.5% to 70.0% in the commercial sector.

  7. Savings and Debts in Agriculture

    Directory of Open Access Journals (Sweden)

    Marina Luminita Sarbovan

    2012-05-01

    Full Text Available The savings and debts problematic bring us in front the Keynesian principles of supporting the global demand, so spectacular immortalized inside his “General Theory of Money. The architects of the European Union consider that production in agriculture and other economic branches is “ab initio” grounded on the credit mechanism administrated by banks: the present day approach of the agricultural process configured it as costly, owing a relatively medium to long term duration, and risky, making important the banking institution for mitigating such constrains. Romania fights for the ambitious goal of entering in the euro zone, and this target became even more challenging after the new EU Regulation No 1176/2011 on the prevention and correction of macroeconomic imbalances, which stipulates a safer surveillance for the member states. In fact, our country has to meet the exigencies of nominal and real convergence criteria, measured by the European scoreboard and relevant index.

  8. Efficient Kill-Save Ratios Ease Up the Cognitive Demands on Counterintuitive Moral Utilitarianism.

    Science.gov (United States)

    Trémolière, Bastien; Bonnefon, Jean-François

    2014-07-01

    The dual-process model of moral judgment postulates that utilitarian responses to moral dilemmas (e.g., accepting to kill one to save five) are demanding of cognitive resources. Here we show that utilitarian responses can become effortless, even when they involve to kill someone, as long as the kill-save ratio is efficient (e.g., 1 is killed to save 500). In Experiment 1, participants responded to moral dilemmas featuring different kill-save ratios under high or low cognitive load. In Experiments 2 and 3, participants responded at their own pace or under time pressure. Efficient kill-save ratios promoted utilitarian responding and neutered the effect of load or time pressure. We discuss whether this effect is more easily explained by a parallel-activation model or by a default-interventionist model. © 2014 by the Society for Personality and Social Psychology, Inc.

  9. Is It Worth Saving?: The Condition of Archaeological Documentary Record and Strategies for Preservation

    Directory of Open Access Journals (Sweden)

    Douglas R. Givens

    1992-11-01

    Full Text Available "[Historical] objects are events which have finished happening, and conditions [are] no longer in existence. Only when they are no longer perceptible do they become objects of historical thought" (Collingwood 1946:233. Scholars engaged in research in the history of anthropology and archaeology have long been aware of the deplorable conditions in which records as to anthropology's development in time are found and stored. All too often the researcher finds records in individual and institutional hands that are physically degrading because of the lack of proper storage facilities, the fiscal inability to hire professional archivists, the usage of improper methods of acquisition and curation, and dwindling financial resources to properly care for materials. It is now the time to ask if anthropological records are worth saving, and if they are, what are the best strategies to be employed to ensure their survival and protection now and into the future. The purpose of this paper is to suggest that the records of the subdiscipline of archaeology are worth saving and that there is a great sense of urgency to get about the business of identification and preservation before archaeological documentary records are further destroyed due to neglect and the lack of means to ensure their future existence.  This paper will define the problems of identification and preservation of archaeological records as they exist now and suggest strategies to rectify those problems.

  10. Holistic impact assessment and cost savings of rainwater harvesting at the watershed scale

    Directory of Open Access Journals (Sweden)

    Santosh R. Ghimire

    2017-03-01

    Full Text Available We evaluated the impacts of domestic and agricultural rainwater harvesting (RWH systems in three watersheds within the Albemarle-Pamlico river basin (southeastern U.S. using life cycle assessment (LCA and life cycle cost assessment. Life cycle impact assessment (LCIA categories included energy demand, fossil fuel, metals, ozone depletion, global warming, acidification, smog, blue and green water use, ecotoxicity, eutrophication, and human health effects. Building upon previous LCAs of near-optimal domestic and agricultural RWH systems in the region, we scaled functional unit LCIA scores for adoption rates of 25%, 50%, 75%, and 100% and compared these to conventional municipal water and well water systems. In addition to investigating watershed-scale impacts of RWH adoption, which few studies have addressed, potential life cycle cost savings due to reduced cumulative energy demand were scaled in each watershed for a more comprehensive analysis. The importance of managing the holistic water balance, including blue water (surface/ground water, green water (rainwater use, and annual precipitation and their relationship to RWH are also addressed. RWH contributes to water resource sustainability by offsetting surface and ground water consumption and by reducing environmental and human health impacts compared to conventional sources. A watershed-wide RWH adoption rate of 25% has a number of ecological and human health benefits including blue water use reduction ranging from 2–39 Mm3, cumulative energy savings of 12–210 TJ, and reduced global warming potential of 600–10,100 Mg CO2 eq. Potential maximum lifetime energy cost savings were estimated at $5M and $24M corresponding to domestic RWH in Greens Mill and agricultural RWH in Back Creek watersheds.

  11. Moonlight project promotes energy-saving technology

    Science.gov (United States)

    Ishihara, A.

    1986-01-01

    In promoting energy saving, development of energy conservation technologies aimed at raising energy efficiency in the fields of energy conversion, its transportation, its storage, and its consumption is considered, along with enactment of legal actions urging rational use of energies and implementation of an enlightenment campaign for energy conservation to play a crucial role. Under the Moonlight Project, technical development is at present being centered around the following six pillars: (1) large scale energy saving technology; (2) pioneering and fundamental energy saving technology; (3) international cooperative research project; (4) research and survey of energy saving technology; (5) energy saving technology development by private industry; and (6) promotion of energy saving through standardization. Heat pumps, magnetohydrodynamic generators and fuel cells are discussed.

  12. Small Businesses Save Big: A Borrower's Guide To Increase the Bottom Line Using Energy Efficiency (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-01-01

    Dollars saved through energy efficiency can directly impact your bottom line. Whether you are planning for a major renovation or upgrading individual pieces of building equipment, these improvements can help reduce operating costs, save on utility bills, and boost profits. This fact sheet provides a guide for small businesses to find the resources to increase the energy efficiency of their buildings.

  13. Saving in Sub-Saharan Africa

    OpenAIRE

    Ernest Aryeetey; Christopher Udry

    2000-01-01

    Gross domestic savings in Africa averaged only 8 percent of GDP in the 1980s, compared to 23 percent for Southeast Asia and 35 percent in the Newly Industrialized Economies. Aside from being generally low, saving rates in most of Africa have shown consistent decline over the last thirty years. These savings figures must be considered tentative, because they are derived as a residual in the national accounts from expenditure and production data that are themselves quite unreliable. Notwithstan...

  14. Energy savings in CSFR - building sector

    International Nuclear Information System (INIS)

    Jacobsen, F.R.

    1993-01-01

    The Czechoslovak/Danish project on energy savings in buildings proves that it is possible to save up to 30% of the energy in buildings. 10% can be saved at an investment of 27 bill KCS. The total investment that is needed to save 30% is 140 bill KCS. Further energy savings can be obtained through more energy efficient supply systems. Information dissemination is important for the energy saving programme as are economic incentives. Investments in energy savings should be profitable for the investor, but this is not the case in the Czech and Slovak republics today. Changes are needed. Energy prices are still to low, compared to investment costs. Financial possibilities are not satisfactory for private investors. Price systems are not favourable to investment in energy savings. Training is needed for boiler men and energy consultants. Legislation is essential for the support of the full range of activities in the energy sector. Research and Development activities must back up the development of the sector. Pilot projects can illuminate the savings potential. The production of technical equipment for control and metering and production of insulation materials must be promoted. (AB)

  15. Cogeneration an opportunity for industrial energy saving

    International Nuclear Information System (INIS)

    Pasha, R.A.; Butt, Z.S.

    2011-01-01

    This paper is about the cogeneration from industrial energy savings opportunities perspective. The energy crisis in these days forces industry to find ways to cope with critical situation. There are several energy savings options which if properly planned and implemented would be beneficial both for industry and community. One way of energy saving is Cogeneration i.e. Combined Heat and Power. The paper will review the basic methods, types and then discuss the suitability of these options for specific industry. It has been identified that generally process industry can get benefits of energy savings. (author)

  16. Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Chemical engineering of nanomaterials. Energy- and resource-saving chemical-engineering processes and problems of their intensification. Processes and apparatuses of chemical engineering, chemical cybernetics. Ecological problems of chemical engineering and related fields

    International Nuclear Information System (INIS)

    Zakhodyaeva, Yu.A.; Belova, V.V.

    2012-01-01

    In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning chemical engineering of nanomaterials, energy- and resource-saving chemical-engineering processes, processes and apparatuses of chemical engineering, chemical cybernetics, ecological problems of chemical engineering and related fields. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

  17. SWEEP - Save Water and Energy Education Program; FINAL

    International Nuclear Information System (INIS)

    Sullivan, Gregory P; Elliott, Douglas B; Hillman, Tim C; Hadley, Adam; Ledbetter, Marc R; Payson, David R

    2001-01-01

    The objective of this study was to develop, monitor, analyze, and report on an integrated resource-conservation program highlighting efficient residential appliances and fixtures. The sites of study were 50 homes in two water-constrained communities located in Oregon. The program was designed to maximize water savings to these communities and to serve as a model for other communities seeking an integrated approach to energy and water resource efficiency. The program included the installation and in-place evaluation of energy- and water-efficient devices including the following: horizontal axis clothes washers (and the matching clothes dryers), resource-efficient dishwashers, an innovative dual flush low-flow toilet, low-flow showerheads, and faucet aerators. The significance of this activity lies in its integrated approach and unique metering evaluation of individual end-use, aggregated residential total use, and system-wide energy and water benefits

  18. Saving oil in a hurry

    Energy Technology Data Exchange (ETDEWEB)

    none

    2005-07-01

    During 2004, oil prices reached levels unprecedented in recent years. Though world oil markets remain adequately supplied, high oil prices do reflect increasingly uncertain conditions. Many IEA member countries and non-member countries alike are looking for ways to improve their capability to handle market volatility and possible supply disruptions in the future. This book aims to provide assistance. It provides a new, quantitative assessment of the potential oil savings and costs of rapid oil demand restraint measures for transport. Some measures may make sense under any circumstances; others are primarily useful in emergency situations. All can be implemented on short notice ? if governments are prepared. The book examines potential approaches for rapid uptake of telecommuting, ?ecodriving?, and car-pooling, among other measures. It also provides methodologies and data that policymakers can use to decide which measures would be best adapted to their national circumstances. This ?tool box? may help countries to complement other measures for coping with supply disruptions, such as use of strategic oil stocks.

  19. Energy-saving motor; Energiesparmotor

    Energy Technology Data Exchange (ETDEWEB)

    Lindegger, M.

    2002-07-01

    This report for the Swiss Federal Office of Energy (SFOE) describes the development and testing of an advanced electrical motor using a permanent-magnet rotor. The aims of the project - to study the technical feasibility and market potential of the Eco-Motor - are discussed and the three phases of the project described. These include the calculation and realisation of a 250-watt prototype operating at 230 V, the measurement of the motor's characteristics as well as those of a comparable asynchronous motor on the test bed at the University of Applied Science in Lucerne, Switzerland, and a market study to establish if the Eco-Motor and its controller can compete against normal asynchronous motors. Also, the results of an analysis of the energy-savings potential is made, should such Eco-Motors be used. Detailed results of the three phases of the project are presented and the prospects of producing such motors in Switzerland for home use as well as for export are examined.

  20. Enershield : energy saving air barriers

    Energy Technology Data Exchange (ETDEWEB)

    Hallihan, D. [Enershield Industries Ltd., Edmonton, AB (Canada)

    2008-07-01

    Enershield Industries is a leader in air barrier technology and provides solution for the Canadian climate. This presentation described the advantages of air barriers and the impact of rising energy costs. An air barrier is used to separate areas of differing environments and makes existing building systems more efficient. This presentation discussed how an air barrier works. It also identified how Enershield Industries calculates energy savings. It described air barrier applications and those who use barrier technology. These include the commercial and industrial sector as well as the personnel and retail sector. Barrier technology can be used for cold storage; vehicle and equipment washes; food processing; and environmental separation. Features and benefits such as the ability to create seal, acoustic insulation, and long term durability were also discussed. Last, the presentation addressed model selection and design criteria issues. Design criteria that were presented included a discussion of acoustic installation, articulating nozzles, scroll cased fans, and structural frame. Other design criteria presented were galvanized frames, telescopic sliders, and off the shelf parts. It was concluded that the ability to reduce energy consumption and enhance employee/client comfort is beneficial to the employer as well as to the employee. figs.

  1. China energy-water nexus: Assessing the water-saving synergy effects of energy-saving policies during the eleventh Five-year Plan

    International Nuclear Information System (INIS)

    Gu, Alun; Teng, Fei; Wang, Yu

    2014-01-01

    Highlights: • Energy and water limit China’s sustainable development. • Current energy policies fail to address water saving issues. • The energy-water coefficient is estimated for both direct use and indirect use. • Water saving effects associated with energy-saving policies is calculated. • Water-energy nexus should be enhanced in key industrial sectors. - Abstract: Energy and water have become major factors limiting sustainable development in China. Energy efficiency and optimization of water management are critical for the healthy growth of the Chinese economy. Current national energy policies fail to adequately address water use issues. Similarly, current water policies do not consider the impact of energy consumption and greenhouse gas emissions. Consequently, few studies have investigated the relationship between energy consumption and water use. The present study analyzes the energy-water nexus in Chinese industries using input–output tables. Coefficients that characterize the relationship between energy consumption and water are used to describe the supply-consumption relationship between the water supply and primary energy sectors. Next, we calculate the water-saving effects associated with the enforcement of energy-saving policies in selected industrial sectors during the eleventh Five-year Plan, from 2005 to 2010. These calculations address the ferrous metals, non-ferrous metals, petrochemical engineering, building materials, and electricity industries as well as key light industries. Our findings indicate that energy-saving efforts in these industries will result in savings in water consumption. This study suggests that a cooperative relationship between water and energy conservation efforts should be an important factor in creating policies that encourage simultaneous savings of both resources. Additionally, the study indicates that government should promote water- and energy-saving techniques in key industrial sectors to encourage

  2. Save water to save carbon and money: developing abatement costs for expanded greenhouse gas reduction portfolios.

    Science.gov (United States)

    Stokes, Jennifer R; Hendrickson, Thomas P; Horvath, Arpad

    2014-12-02

    The water-energy nexus is of growing interest for researchers and policy makers because the two critical resources are interdependent. Their provision and consumption contribute to climate change through the release of greenhouse gases (GHGs). This research considers the potential for conserving both energy and water resources by measuring the life-cycle economic efficiency of greenhouse gas reductions through the water loss control technologies of pressure management and leak management. These costs are compared to other GHG abatement technologies: lighting, building insulation, electricity generation, and passenger transportation. Each cost is calculated using a bottom-up approach where regional and temporal variations for three different California water utilities are applied to all alternatives. The costs and abatement potential for each technology are displayed on an environmental abatement cost curve. The results reveal that water loss control can reduce GHGs at lower cost than other technologies and well below California's expected carbon trading price floor. One utility with an energy-intensive water supply could abate 135,000 Mg of GHGs between 2014 and 2035 and save--rather than spend--more than $130/Mg using the water loss control strategies evaluated. Water loss control technologies therefore should be considered in GHG abatement portfolios for utilities and policy makers.

  3. Concepts. Environmental care through energy saving

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, G.

    1987-04-01

    Energy saving is an important ingredient of a preventive energy policy. It helps to reduce pollutants which are one essential source of damage done to air, water and soil. But even the environmentally damaging side effects of energy production, storage and distribution can be cut down through energy saving.

  4. Housing-related lifestyle and energy saving

    DEFF Research Database (Denmark)

    Thøgersen, John

    2017-01-01

    of relevant background characteristics. A multivariate GLM analysis reveals that when differences in housing-related lifestyles are controlled, neither country of residence nor the interaction between lifestyle and country of residence influence energy saving innovativeness or everyday energy-saving efforts...

  5. Mozambican Aggregate Consumption and Domestic Saving ...

    African Journals Online (AJOL)

    It was an unprecedented decade for its break with the previous trend; but so far, the new trend does not correspond to a substantial change in growth strategy to ensure that foreign savings become complementary rather than a substitute for domestic savings. Keywords: consumption, economic growth strategy, domestic ...

  6. 37 CFR 11.61 - Savings clause.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Savings clause. 11.61 Section... Disciplinary Proceedings; Jurisdiction, Sanctions, Investigations, and Proceedings § 11.61 Savings clause. (a... subsequent to such effective date, if such conduct would continue to justify suspension or exclusion under...

  7. Saving Energy. Managing School Facilities, Guide 3.

    Science.gov (United States)

    Department for Education and Employment, London (England). Architects and Building Branch.

    This guide offers information on how schools can implement an energy saving action plan to reduce their energy costs. Various low-cost energy-saving measures are recommended covering heating levels and heating systems, electricity demand reduction and lighting, ventilation, hot water usage, and swimming pool energy management. Additional…

  8. The High Cost of Saving Energy Dollars.

    Science.gov (United States)

    Rose, Patricia

    1985-01-01

    In alternative financing a private company provides the capital and expertise for improving school energy efficiency. Savings are split between the school system and the company. Options for municipal leasing, cost sharing, and shared savings are explained along with financial, procedural, and legal considerations. (MLF)

  9. 10 CFR 436.20 - Net savings.

    Science.gov (United States)

    2010-01-01

    ... ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.20 Net savings. For a retrofit project, net savings may be found by subtracting life cycle costs based on the proposed project from life cycle costs based on not having it. For a...

  10. Models of Energy Saving Systems

    DEFF Research Database (Denmark)

    Nørgård, Jørgen Stig

    1999-01-01

    only. The need for including also the economic policy in the energy planning is illustrated with what is termed the efficiency pittfall. This points towards difficulties in imaging an integrated resource planning combined with a liberalized market. The three variable parameters, population, energy...... service level and technology are demonstrated as the main determinants of future energy consumption. In the concluding remarks, the main flaws of present energy policy and some visions of the future are discussed....

  11. Risk transfer via energy savings insurance

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan

    2001-10-01

    Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of $875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance

  12. Risk transfer via energy savings insurance; TOPICAL

    International Nuclear Information System (INIS)

    Mills, Evan

    2001-01-01

    Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of$875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance sheets to self

  13. Saving electricity in a hurry - update 2011

    Energy Technology Data Exchange (ETDEWEB)

    Pasquier, Sara Bryan

    2011-06-15

    As demonstrated by the March 2011 earthquake and tsunami-triggered blackouts in Japan, electricity shortfalls can happen anytime and anywhere. Countries can minimise the negative economic, social and environmental impacts of such electricity shortfalls by developing emergency energy-saving strategies before a crisis occurs. This new IEA report highlights preliminary findings and conclusions from electricity shortfalls in Japan, the United States, New Zealand, South Africa and Chile. It draws on recent analysis to: reinforce well-established guidelines on diagnosing electricity shortfalls, identifying energy-saving opportunities and selecting a package of energy-saving measures; and highlight proven practice for implementing emergency energy-saving programmes. This paper will be valuable to government, academic, private-sector and civil-society stakeholders who inform, develop and implement electricity policy in general, and emergency energy-saving programmes in particular.

  14. ONU Power Saving Scheme for EPON System

    Science.gov (United States)

    Mukai, Hiroaki; Tano, Fumihiko; Tanaka, Masaki; Kozaki, Seiji; Yamanaka, Hideaki

    PON (Passive Optical Network) achieves FTTH (Fiber To The Home) economically, by sharing an optical fiber among plural subscribers. Recently, global climate change has been recognized as a serious near term problem. Power saving techniques for electronic devices are important. In PON system, the ONU (Optical Network Unit) power saving scheme has been studied and defined in XG-PON. In this paper, we propose an ONU power saving scheme for EPON. Then, we present an analysis of the power reduction effect and the data transmission delay caused by the ONU power saving scheme. According to the analysis, we propose an efficient provisioning method for the ONU power saving scheme which is applicable to both of XG-PON and EPON.

  15. Values and Technologies in Energy Savings

    DEFF Research Database (Denmark)

    Nørgård, Jørgen Stig

    2000-01-01

    of this saving can cause what is called the rebound effect, which reduces the savings obtained from the technology. Ways to avoid this effect are suggested, and they require value changes, primarly around frugality, consumption, and hard-working. There are indications that some of the necessary changes are well......The chapter is based on the assumption, that technology improvement is not sufficient to achieve a sustainable world community. Changes in people´s values are necessary. A simple model suggest how values, together with basic needs and with the environmental and societal frames, determine people......´s behavioural pattern and lifestyles. Deliberate changes in social values are illustrated by a historical example. From the side of technology the basic principles in the economy of energy savings are briefly described. The marginally profitable energy savings provides an economic saving. The application...

  16. Can this merger be saved?

    Science.gov (United States)

    Cliffe, S

    1999-01-01

    In this fictional case study, a merger that looked like a marriage made in heaven to those at corporate headquarters is feeling like an infernal union to those on the ground. The merger is between Synergon Capital, a U.S. financial-services behemoth, and Beauchamp, Becker & Company, a venerable British financial-services company with strong profits and an extraordinarily loyal client base of wealthy individuals. Beauchamp also boasts a strong group of senior managers led by Julian Mansfield, a highly cultured and beloved patriarch who personifies all that's good about the company. Synergon isn't accustomed to acquiring such companies. It usually encircles a poorly managed turnaround candidate and then, once the deal is done, drops a neutron bomb on it, leaving file cabinets and contracts but no people. Before acquiring Beauchamp, Synergon's macho men offered loud assurances that they would leave the tradition-bound company alone-provided, of course, that Beauchamp met the ambitious target numbers and showed sufficient enthusiasm for cross-selling Synergon's products to its wealthy clients. In charge of making the acquisition work is Nick Cunningham, one of Synergon's more thoughtful executives. Nick, who was against the deal from the start, is the face and voice of Synergon for Julian Mansfield. And Mansfield, in his restrained way, is angry at the constant flow of bureaucratic forms, at the rude demands for instant information, at the peremptory changes. He's even dropping broad hints at retirement. Nick has already been warned: if Mansfield goes, you go. Six commentators advise Nick on how to save his job by bringing peace and prosperity to the feuding couple.

  17. Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D. B.; Hadley, S. W.; Chin, S-M.

    2008-10-01

    compared to the northern regions, a result possibly due to a small, offsetting increase in household air conditioning usage. (4) Changes in national traffic volume and motor gasoline consumption for passenger vehicles in 2007 were determined to be statistically insignificant and therefore, could not be attributed to Extended Daylight Saving Time.

  18. DEVELOPMENT OF KOSOVO PENSION SAVING TRUST FUND

    Directory of Open Access Journals (Sweden)

    Ymer Havolli

    2016-11-01

    Full Text Available Pension system in Kosovo has experienced various developments in the last three decades. These changes have been driven by both, political and economic developments. The political developments were most important, especially that the previous system failed due to the lack of access to the fund in the post-war Kosovo. The newly established system in post-war Kosovo continues its operations with principles of modern pension fund, savings-based. KPST was established by Law in December 2001 as a not-for-profit institution. As such, the sole objective of KPST is to serve only the best interests of its contributors. KPST is funded in a similar way as are all defined contribution pension funds i.e. by charging fees on assets under management (pension assets. KPST is funded in a similar way as are all defined contribution pension funds i.e. by charging fees on assets under management (pension assets. Throughout this discussion paper, the implications of the crisis, management, asset management issues and most importantly, investment strategy are discussed and some potential solutions to these problems are proposed in order to increase the flexibility of the fund to improve performance in times of crisis.

  19. Calculating cost savings in utilization management.

    Science.gov (United States)

    MacMillan, Donna

    2014-01-01

    A major motivation for managing the utilization of laboratory testing is to reduce the cost of medical care. For this reason it is important to understand the basic principles of cost accounting in the clinical laboratory. The process of laboratory testing includes three distinct components termed the pre-analytic, analytic and post-analytic phases. Utilization management efforts may impact the cost structure of these three phases in different ways depending on the specific details of the initiative. Estimates of cost savings resulting from utilization management programs reported in the literature have often been fundamentally flawed due to a failure to understand basic concepts such as the difference between laboratory costs versus charges and the impact of reducing laboratory test volumes on the average versus marginal cost structure in the laboratory. This article will provide an overview of basic cost accounting principles in the clinical laboratory including both job order and process cost accounting. Specific examples will be presented to illustrate these concepts in various different scenarios. © 2013.

  20. Implementing Suicide Prevention Programs: Costs and Potential Life Years Saved in Canada.

    Science.gov (United States)

    Vasiliadis, Helen-Maria; Lesage, Alain; Latimer, Eric; Seguin, Monique

    2015-09-01

    ,979 per life year saved. Suicide prevention programs such as the NAD trial are cost-effective and can result in important potential cost-savings due to averted suicide deaths and reduced life years lost. Implementation of suicide prevention programs at the population level in Canada is cost-effective. Community mental health programs aimed at increasing awareness and the treatment of depression and better follow-up of high risk individuals for suicide are associated with a minimal per capita investment. These programs can result in important potential cost-savings due to averted suicide deaths and decreased disability due to depression. Additional research should focus on whether the outcomes of multi-modal suicide programs are specific or synergistic and most effective for which population subgroups. This may help inform how best to invest resources for the highest return.

  1. Online Resources

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics; Online Resources. Journal of Genetics. Online Resources. Volume 97. 2018 | Online resources. Volume 96. 2017 | Online resources. Volume 95. 2016 | Online resources. Volume 94. 2015 | Online resources. Volume 93. 2014 | Online resources. Volume 92. 2013 | Online resources ...

  2. Saving can save from death anxiety: mortality salience and financial decision-making.

    Science.gov (United States)

    Zaleskiewicz, Tomasz; Gasiorowska, Agata; Kesebir, Pelin

    2013-01-01

    Four studies tested the idea that saving money can buffer death anxiety and constitute a more effective buffer than spending money. Saving can relieve future-related anxiety and provide people with a sense of control over their fate, thereby rendering death thoughts less threatening. Study 1 found that participants primed with both saving and spending reported lower death fear than controls. Saving primes, however, were associated with significantly lower death fear than spending primes. Study 2 demonstrated that mortality primes increase the attractiveness of more frugal behaviors in save-or-spend dilemmas. Studies 3 and 4 found, in two different cultures (Polish and American), that the activation of death thoughts prompts people to allocate money to saving as opposed to spending. Overall, these studies provided evidence that saving protects from existential anxiety, and probably more so than spending.

  3. Saving can save from death anxiety: mortality salience and financial decision-making.

    Directory of Open Access Journals (Sweden)

    Tomasz Zaleskiewicz

    Full Text Available Four studies tested the idea that saving money can buffer death anxiety and constitute a more effective buffer than spending money. Saving can relieve future-related anxiety and provide people with a sense of control over their fate, thereby rendering death thoughts less threatening. Study 1 found that participants primed with both saving and spending reported lower death fear than controls. Saving primes, however, were associated with significantly lower death fear than spending primes. Study 2 demonstrated that mortality primes increase the attractiveness of more frugal behaviors in save-or-spend dilemmas. Studies 3 and 4 found, in two different cultures (Polish and American, that the activation of death thoughts prompts people to allocate money to saving as opposed to spending. Overall, these studies provided evidence that saving protects from existential anxiety, and probably more so than spending.

  4. A review of different strategies for HVAC energy saving

    International Nuclear Information System (INIS)

    Vakiloroaya, Vahid; Samali, Bijan; Fakhar, Ahmad; Pishghadam, Kambiz

    2014-01-01

    Highlights: • Various strategies for HVAC energy saving are described and reviewed. • The influence of each strategy on the HVAC energy saving is investigated. • Combination of existing air conditioning technologies appears to be effective for the energy conservation and comfort. • A comparison study between these approaches is carried out. • Changing the HVAC configuration has the potential to increase or reduce energy savings, depending on several factors. - Abstract: Decreasing the energy consumption of heating, ventilation and air conditioning (HVAC) systems is becoming increasingly important due to rising cost of fossil fuels and environmental concerns. Therefore, finding novel ways to reduce energy consumption in buildings without compromising comfort and indoor air quality is an ongoing research challenge. One proven way of achieving energy efficiency in HVAC systems is to design systems that use novel configurations of existing system components. Each HVAC discipline has specific design requirements and each presents opportunities for energy savings. Energy efficient HVAC systems can be created by re-configuring traditional systems to make more strategic use of existing system parts. Recent research has demonstrated that a combination of existing air conditioning technologies can offer effective solutions for energy conservation and thermal comfort. This paper investigates and reviews the different technologies and approaches, and demonstrates their ability to improve the performance of HVAC systems in order to reduce energy consumption. For each strategy, a brief description is first presented and then by reviewing the previous studies, the influence of that method on the HVAC energy saving is investigated. Finally, a comparison study between these approaches is carried out

  5. Electric energy savings from new technologies

    Energy Technology Data Exchange (ETDEWEB)

    Moe, R.J.; Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

    1986-01-01

    Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for ten technologies were prepared. The total projected annual savings for the year 2000 for all ten technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Thus, the savings projected here represent between 4% and 14% of total consumption projected for 2000. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference forecast, reducing projected electricity consumption from what it otherwise would have been, the savings estimated here should not be directly subtracted from the reference forecast.

  6. Energy conservation. Federal shared energy savings contracting

    International Nuclear Information System (INIS)

    Fultz, Keith O.; Milans, Flora H.; Kirk, Roy J.; Welker, Robert A.; Sparling, William J.; Butler, Sharon E.; Irwin, Susan W.

    1989-04-01

    A number of impediments have discouraged federal agencies from using shared energy savings contracts. As of November 30, 1988, only two federal agencies - the U.S. Postal Service (USPS) and the Department of the Army -had awarded such contracts even though they can yield significant energy and cost savings. The three major impediments we identified were uncertainty about the applicability of a particular procurement policy and practice, lack of management incentives, and difficulty in measuring energy and cost savings. To address the first impediment, the Department of Energy (DOE) developed a manual on shared energy savings contracting. The second impediment was addressed when the 100th Congress authorized incentives for federal agencies to enter into shared savings contracts. DOE addressed the third impediment by developing a methodology for calculating energy consumption and cost savings. However, because of differing methodological preferences, this issue will need to be addressed on a contract-by-contract basis. Some state governments and private sector firms are using performance contracts to reduce energy costs in their buildings and facilities. We were able to identify six states that were using performance contracts. Five have established programs, and all six states have projects under contract. The seven energy service companies we contacted indicated interest in federal shared energy savings contracting

  7. Potential opportunities for energy savings in a Jordanian poultry company

    International Nuclear Information System (INIS)

    AlQdah, K.

    2010-01-01

    Rising concern about energy resource availability and energy prices in Jordan, cost of energy has become an issue that cannot be ignored in Jordan's industrial sector. In this study, energy auditing in a meat production factory related to poultry company was carried out. Based on the collected data and the conservation laws of energy, the performance of steam boilers, domestic hot water boilers, compressors, refrigeration systems, chillers, pumps, daily consumption of diesel and water were reviewed. The percentage of energy consumed by the refrigeration units, with respect to the total energy consumed, has been estimated. The results demonstrated a normal operation with thermal efficiency of 80.66% for the steam boiler, ability to save 18818.99 JD by installing economizer with payback period of 0.637 year and a 12.3% reduction of the energy cost achieved by reducing the blow down rate. The rate of diesel consumption was reduced by 12.87% over the last period of the study as a result of the recommendations that have been submitted to the technicians and professionals. The sum of 22223.77 JD can be saved by using heavy fuel oil instead of diesel oil. Moreover, this study demonstrated that energy saving can be considered as an ideal choice to increase profit and promote competition within the poultry industry if the company adopts all the proposals and recommendations that have been offered by this study.

  8. Freshwater savings from marine protein consumption

    International Nuclear Information System (INIS)

    Gephart, Jessica A; Pace, Michael L; D’Odorico, Paolo

    2014-01-01

    Marine fisheries provide an essential source of protein for many people around the world. Unlike alternative terrestrial sources of protein, marine fish production requires little to no freshwater inputs. Consuming marine fish protein instead of terrestrial protein therefore represents freshwater savings (equivalent to an avoided water cost) and contributes to a low water footprint diet. These water savings are realized by the producers of alternative protein sources, rather than the consumers of marine protein. This study quantifies freshwater savings from marine fish consumption around the world by estimating the water footprint of replacing marine fish with terrestrial protein based on current consumption patterns. An estimated 7 600 km 3  yr −1 of water is used for human food production. Replacing marine protein with terrestrial protein would require an additional 350 km 3  yr −1 of water, meaning that marine protein provides current water savings of 4.6%. The importance of these freshwater savings is highly uneven around the globe, with savings ranging from as little as 0 to as much as 50%. The largest savings as a per cent of current water footprints occur in Asia, Oceania, and several coastal African nations. The greatest national water savings from marine fish protein occur in Southeast Asia and the United States. As the human population increases, future water savings from marine fish consumption will be increasingly important to food and water security and depend on sustainable harvest of capture fisheries and low water footprint growth of marine aquaculture. (paper)

  9. Mobile financial services and financial inclusion: Is it a boon for savings mobilization?

    Directory of Open Access Journals (Sweden)

    Shem Alfred Ouma

    2017-06-01

    Full Text Available The adoption of mobile telephony to provide financial services in Africa has become instrumental in integrating the hitherto unbanked segments of the population to the mainstream financial systems. This study sought to establish this linkage by examining whether the pervasive use of mobile telephony to provide financial services is a boon for savings mobilization in selected countries in sub Saharan Africa. The findings show that availability and usage of mobile phones to provide financial services promotes the likelihood of saving at the household level. Not only does access to mobile financial services boost the likelihood to save, but also has a significant impact on the amounts saved, perhaps due to the frequency and convenience with which such transactions can be undertaken using a mobile phone. Both forms of savings, that is, basic mobile phone savings stored in the phone and bank integrated mobile savings are likely to be promoted by use of mobile phones. Thus, growing and deepening the scope for mobile phone financial services is an avenue for promoting savings mobilization, especially among the poor and low income groups with constrained access to formal financial services.

  10. Evaluation of realised energy savings with simulation models. A new policy tool for the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Boonekamp, P.G.M. [ECN Policy Studies, Petten (Netherlands)

    2013-01-15

    This report describes a new analysis tool for the evaluation of realised energy savings, and effects of savings policy, in the Netherlands. It aims to meet the information needs of policymakers, both at national and EU level, using the monitoring results of the NL Agency. The system builds on the Protocol Monitoring Energy Savings to calculate realised savings. The innovation consists of the option to adjust energy models per sector, as already used for scenario analysis, to simulate past developments. The simulations can estimate total savings and assess the contribution of policy measures. The detailed simulation approach also enables the decomposition of energy trends into volume-effects due to growth, structural effects such as fuel substitution and import/exports, and various saving effects. As the modeling system is already used for the analysis of future trends, it enables a good comparison between ex-ante (expected) savings and ex-post (realised) savings. Finally, the system enables a faster delivery of calculation results than presently is the case.

  11. Principles of valuing business travel time savings

    OpenAIRE

    Fowkes, A.S.

    2001-01-01

    OVERVIEW\\ud \\ud There are two approaches to valuing travel time savings to business people. The first is that which has formed the basis of UK policy for about 30 years, and which is set out in Section 2. This takes the value of travel time savings on employer’s business as equal to the gross wage rate plus an allowance for other costs that the employer saves. These might include such things as desk space, computer, tools, uniform, protective clothing, travel expenses. These were investigated...

  12. Who's in the business of saving lives?

    Science.gov (United States)

    Lee Chang, Pepe

    2006-10-01

    There are individuals, including children, dying needlessly in poverty-stricken third world countries. Many of these deaths could be prevented if pharmaceutical companies provided the drugs needed to save their lives. Some believe that because pharmaceutical companies have the power to save lives, and because they can do so with little effort, they have a special obligation. I argue that there is no distinction, with respect to obligations and responsibilities, between pharmaceutical companies and other types of companies. As a result, to hold pharmaceutical companies especially responsible for saving lives in third world countries is unjustified.

  13. Household water saving: Evidence from Spain

    Science.gov (United States)

    Aisa, Rosa; Larramona, Gemma

    2012-12-01

    This article focuses on household water use in Spain by analyzing the influence of a detailed set of factors. We find that, although the presence of both water-saving equipment and water-conservation habits leads to water savings, the factors that influence each are not the same. In particular, our results show that those individuals most committed to the adoption of water-saving equipment and, at the same time, less committed to water-conservation habits tend to have higher incomes.

  14. Must losing taxes on saving be harmful?

    DEFF Research Database (Denmark)

    Huizinga, Harry; Nielsen, Søren Bo

    2004-01-01

    on account of international tax evasion mayprevent the overall saving-investment tax wedge from becoming too high, and hencemay be beneficial for moderate preferences for public goods. A world with 'high-spending' governments, in contrast, is made worse off by the loss of saving taxes,and hence stands...... are financed by taxes on savingand investment. There is international cross-ownership of firms, and countries areassumed to be unable to tax away pure profits. Countries then face an incentiveto impose a rather high investment tax also borne by foreigners. In this setting,the loss of the saving tax instrument...

  15. Energy-saving approaches to solid state street lighting

    Science.gov (United States)

    Vitta, Pranciškus; Stanikūnas, Rytis; Tuzikas, Arūnas; Reklaitis, Ignas; Stonkus, Andrius; Petrulis, Andrius; Vaitkevičius, Henrikas; Žukauskas, Artūras

    2011-10-01

    We consider the energy-saving potential of solid-state street lighting due to improved visual performance, weather sensitive luminance control and tracking of pedestrians and vehicles. A psychophysical experiment on the measurement of reaction time with a decision making task was performed under mesopic levels of illumination provided by a highpressure sodium (HPS) lamp and different solid-state light sources, such as daylight and warm-white phosphor converted light-emitting diodes (LEDs) and red-green-blue LED clusters. The results of the experiment imply that photopic luminances of road surface provided by solid-state light sources with an optimized spectral power distribution might be up to twice as low as those provided by the HPS lamp. Dynamical correction of road luminance against road surface conditions typical of Lithuanian climate was estimated to save about 20% of energy in comparison with constant-level illumination. The estimated energy savings due to the tracking of pedestrians and vehicles amount at least 25% with the cumulative effect of intelligent control of at least 40%. A solid-state street lighting system with intelligent control was demonstrated using a 300 m long test ground consisting of 10 solid-state street luminaires, a meteorological station and microwave motion sensor network operated via power line communication.

  16. 12 CFR 583.20 - Savings and loan holding company.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Savings and loan holding company. 583.20... REGULATIONS AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.20 Savings and loan holding company. The term savings and loan holding company means any company that directly or indirectly controls a savings...

  17. Saving Soil for Sustainable Land Use

    Directory of Open Access Journals (Sweden)

    Carmelo M. Torre

    2017-02-01

    Full Text Available This paper experiments with some costs-benefit analyses, seeking a balance between soil-take and buildability due to land policy and management. The activities have been carried out inside the MITO lab (Lab for Multimedia Information for Territorial Objects of the Polytechnic University of Bari. Reports have been produced about the Southern Italian Apulia Region, which is rich in farmland and coastline, often invaded by construction, with a severe loss of nature, a degradation of the soil, landscape, and ecosystem services. A methodological approach to the assessment of sustainability of urban expansion related, on one hand, to “plus values” deriving from the transformation of urban fringes and, on the other hand to the analysis of the transition of land-use, with the aim of “saving soil” against urban sprawl. The loss of natural and agricultural surfaces due to the expanding artificial lands is an unsustainable character of urban development, especially in the manner in which it was carried out in past decades. We try to assess how plus value can be considered “unearned”, and to understand if the “land value recapture” can compensate for the negative environmental effects of urban expansion. We measured the transition from farmlands and natural habitat to urbanization with the support of the use of some Geographic Information Systems (GIS tools, in favor of a new artificial land cover in the region of Apulia, Southern Italy. Data have been collected at the regional scale and at the local level, producing information about land use change and increases of property values due to improvements, referring to the 258 municipalities of the region. Looking at the results of our measurements, we started an interpretation of the driving forces that favor the plus values due to the transition of land-use. Compensation, easements, recapture of plus value, and improvement are, nowadays in Italy, discussed as major land-policy tools for

  18. Uranium: which resources for tomorrow?

    International Nuclear Information System (INIS)

    Bouisset, P.; Polak, Ch.; Milesi, J.P.

    2009-01-01

    The authors give an overview of the current uranium world mine production and indicate the consumption predictions by 2030 as well as the share of high grade and low grade deposits in the world production. They outline the challenges for future production: production costs of new mines, technological development for the identification of new resources, technological development of new, innovating and cost saving processes, and new exploration processes. They indicate and comment assessments made by the IAEA regarding conventional and non-conventional resources, i.e. reasonably assured resources and resources where uranium is a by-product

  19. Evaluating direct energy savings and market transformation effects: A decade of technical design assistance in the northwestern USA

    International Nuclear Information System (INIS)

    Van Den Wymelenberg, Kevin; Brown, G.Z.; Burpee, Heather; Djunaedy, Ery; Gladics, Gunnar; Kline, Jeff; Loveland, Joel; Meek, Christopher; Thimmanna, Harshana

    2013-01-01

    This paper documents the direct energy savings and energy efficiency market transformation impacts of a multi-state design assistance program in the northwestern US. The paper addresses four specific aims. (1) It provides a conservative and justified estimate of the direct energy savings associated with design assistance activities of a market transformation program from 2001 to 2010. (2) It provides a rigorous methodology to evaluate direct energy savings associated with design assistance market transformation programs. (3) It provides a low-cost replicable method to predict energy savings in new buildings by evaluating the integrated design process. (4) It provides quantitative indicators useful for estimating indirect energy savings from market transformation. Applying the recommended analysis method and assuming a 12-year measure life, the direct energy savings of the population (626 buildings; 51,262,000 ft 2 ) is estimated as 45.3 aMW (average megawatts) (electric), and 265,738.089 therms (non-electric). If the entire program budget were divided into the electric savings only, the Lab Network cost per kWh saved ranged from $0.0016 to $0.003 using the recommended method and $0.0092/kWh using the most conservative method. These figures do not isolate contextual influences or represent total resource cost. Statistically significant correlations (r 2 =0.1−0.3) between integrated design scores and energy savings are reported. - Highlights: ► Estimated direct energy savings of a market transformation program are presented. ► A methodology to evaluate energy savings from multiple baselines is documented. ► Level of integrated design can be used to estimate energy savings in new buildings. ► Quantitative evaluation indicators of efficiency market transformation are provided. ► Electric energy saved from design assistance costs between $0.0016 and $0.0092/kWh.

  20. Does energy labelling on residential housing cause energy savings? Working paper

    Energy Technology Data Exchange (ETDEWEB)

    Kjaerbye, V.H.

    2008-12-15

    More than 80% of energy used in households is dedicated to space heating. Large potential energy savings have been identified in the existing housing stock. Energy labelling of single-family houses is seen as an important instrument to provide new house owners with information on efficient energy saving investments that can be made on the house. This paper evaluates the effects of the Danish Energy Labelling Scheme on energy consumption in existing single-family houses with propensity score matching using actual consumption of energy and register data describing the houses and households. We do not find significant energy savings due to the Danish Energy Labelling Scheme. (Author)

  1. User behaviour impact on energy savings potential

    DEFF Research Database (Denmark)

    Rose, Jørgen

    2014-01-01

    and the residents' behaviour and if these defaults do not reflect actual circumstances, it can result in non-realisation of expected energy savings. Furthermore, a risk also exists that residents' behaviour change after the energy upgrading, e.g. to obtain improved comfort than what was possible before......, 3) Domestic hot water consumption and 4) Air change rate. Based on the analysis, a methodology is established that can be used to make more realistic and accurate predictions of expected energy savings associated with energy upgrading taking into account user behaviour....... the upgrading and this could lead to further discrepancies between the calculated and the actual energy savings. This paper presents an analysis on how residents’ behaviour and the use of standard assumptions may influence expected energy savings. The analysis is performed on two typical single-family houses...

  2. Maintaining a Viable Energy Savings Performance Contract

    National Research Council Canada - National Science Library

    Weber, Katherine L; Huckeby, Michael A

    2005-01-01

    Substantial amounts of information are available on Energy Savings Performance Contract award requirements, measurement, and verification, but we have found very little information on the day-to-day...

  3. Potential Logistics Cost Savings from Engine Commonality

    National Research Council Canada - National Science Library

    Henderson, Robert L; Higer, Matthew W

    2007-01-01

    The purpose of this MBA Project is to determine potential logistics cost savings the USAF and DoD could have realized through the life of the F-16 fighter aircraft had they required engine commonality...

  4. Radioisotope savings in industry and agriculture

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-01-15

    Benefits and savings achieved in industry and agriculture were described by leading experts from six different countries at a public discussion organized by the Agency on 24 September 1963, during the last IAEA General Conference.

  5. Site preparation savings through better utilization standards

    Science.gov (United States)

    W.F. Watson; B.J. Stokes; I.W. Savelle

    1984-01-01

    This reports preliminary paper results of a study to determine the savings in the cost of site preparation that can be accomplished by the intensive utiliiation of understory biomass. mechanized sys terns can potentially be used for recovering this material.

  6. Glaucoma: Screening Can Save Your Sight!

    Science.gov (United States)

    ... of this page please turn Javascript on. Feature: Glaucoma Glaucoma: Screening Can Save Your Sight! Past Issues / Fall 2009 Table of Contents People with glaucoma see the world through a tunnel. Glaucoma is ...

  7. Statistical Uncertainty in the Medicare Shared Savings...

    Data.gov (United States)

    U.S. Department of Health & Human Services — According to analysis reported in Statistical Uncertainty in the Medicare Shared Savings Program published in Volume 2, Issue 4 of the Medicare and Medicaid Research...

  8. The School Advanced Ventilation Engineering Software (SAVES)

    Science.gov (United States)

    The School Advanced Ventilation Engineering Software (SAVES) package is a tool to help school designers assess the potential financial payback and indoor humidity control benefits of Energy Recovery Ventilation (ERV) systems for school applications.

  9. 31 CFR 359.35 - May I purchase definitive Series I savings bonds through a payroll savings plan?

    Science.gov (United States)

    2010-07-01

    ... savings bonds through a payroll savings plan? 359.35 Section 359.35 Money and Finance: Treasury... May I purchase definitive Series I savings bonds through a payroll savings plan? You may purchase definitive bonds through deductions from your pay if your employer maintains a payroll savings plan. An...

  10. 31 CFR 351.47 - May I purchase definitive Series EE savings bonds through a payroll savings plan?

    Science.gov (United States)

    2010-07-01

    ... savings bonds through a payroll savings plan? 351.47 Section 351.47 Money and Finance: Treasury....47 May I purchase definitive Series EE savings bonds through a payroll savings plan? You may purchase... maintains a payroll savings plan. An authorized issuing agent must issue the bonds. ...

  11. The value of business travel time savings

    OpenAIRE

    Fowkes, A.S.; Marks, P.; Nash, C.A.

    1986-01-01

    The value of time savings for business travellers forms a sizeable part of the benefits from trunk road, rail and air transport improvement schemes. It is therefore important to possess appropiate values to place on business travel time savings for evaluation purposes. The normal approach in practice is to adopt the wage rate of the workers in question plus an increment for overheads and non-wage payments. \\ud \\ud In this paper criticisms of this approach are discssed and the implications of ...

  12. Potential energy savings and thermal comfort

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Rudbeck, Claus Christian; Schultz, Jørgen Munthe

    1996-01-01

    The simulation results on the energy saving potential and influence on indoor thermal comfort by replacement of common windows with aerogel windows as well as commercial low-energy windows are described and analysed.......The simulation results on the energy saving potential and influence on indoor thermal comfort by replacement of common windows with aerogel windows as well as commercial low-energy windows are described and analysed....

  13. Risk transfer via energy savings insurance

    OpenAIRE

    Mills, Evan

    2001-01-01

    Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of t...

  14. Creation of Carbon Credits by Water Saving

    Directory of Open Access Journals (Sweden)

    Yasutoshi Shimizu

    2012-07-01

    Full Text Available Until now, as a way of reducing greenhouse gas emissions from Japanese homes, the emphasis has been on reduction of energy consumption for air-conditioning and lighting. In recent years, there has been progress in CO2 emission reduction through research into the water-saving performance of bathroom fixtures such as toilets and showers. Simulations have shown that CO2 emissions associated with water consumption in Japanese homes can be reduced by 25% (1% of Japan’s total CO2 emissions by 2020 through the adoption of the use of water-saving fixtures. In response to this finding, a program to promote the replacement of current fixtures with water-saving toilet bowls and thermally insulated bathtubs has been added to the Government of Japan’s energy-saving policy. Furthermore, CO2 emission reduction through widespread use of water-saving fixtures has been adopted by the domestic credit system promoted by the Government of Japan as a way of achieving CO2 emission-reduction targets; application of this credit system has also begun. As part of a bilateral offset credit mechanism promoted by the Government of Japan, research to evaluate the CO2 reduction potential of the adoption of water-saving fixtures has been done in the city of Dalian, in China.

  15. Refrigeration: Introducing energy saving opportunities for business

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-15

    In some industries, most notably food and drink and chemicals, refrigeration accounts for a significant proportion of overall site energy costs. For instance, in the industrial handling of meat, poultry and fish, it often accounts for 50% of total energy costs. In ice-cream production the proportion is 70%. In a number of commercial sectors, refrigeration also represents a significant proportion of overall energy costs. For example: Cold storage 90%; Food supermarkets 50%; Small shops with refrigerated cabinets 70% or over; Pubs and clubs 30%. Against these high costs, even a small reduction in refrigeration energy use can offer significant cost savings, resulting in increased profits. Energy saving need not be expensive. Energy savings of up to 20% can be realised in many refrigeration plant through actions that require little or no investment. In addition, improving the efficiency and reducing the load on a refrigeration plant can improve reliability and reduce the likelihood of a breakdown. Most organisations can save energy and money on refrigeration by: More efficient equipment; Good maintenance; Housekeeping and control. This publication provides an understanding of the operation of refrigeration systems, identifies where savings can be realised and will enable readers to present an informed case on energy savings to key decision makers within their organisation. (GB)

  16. RECRUITMENT FINANCED BY SAVED LEAVE (RSL PROGRAMME)

    CERN Multimedia

    Division du Personnel; Tel. 73903

    1999-01-01

    Transfer to the saved leave account and saved leave bonusStaff members participating in the RSL programme may opt to transfer up to 10 days of unused annual leave or unused compensatory leave into their saved leave account, at the end of the leave year, i.e. 30 September (as set out in the implementation procedure dated 27 August 1997).A leave transfer request form, which you should complete, sign and return, if you wish to use this possibility, has been addressed you. To allow the necessary time for the processing of your request, you should return it without delay.As foreseen in the implementation procedure, an additional day of saved leave will be granted for each full period of 20 days remaining in the saved leave account on 31 December 1999, for any staff member participating in the RSL programme until that date.For part-time staff members participating in the RSL programme, the above-mentioned days of leave (annual, compensatory and saved) are adjusted proportionally to their contractual working week as...

  17. Herpes - resources

    Science.gov (United States)

    Genital herpes - resources; Resources - genital herpes ... following organizations are good resources for information on genital herpes : March of Dimes -- www.marchofdimes.org/complications/sexually- ...

  18. Saving-enhanced memory: the benefits of saving on the learning and remembering of new information.

    Science.gov (United States)

    Storm, Benjamin C; Stone, Sean M

    2015-02-01

    With the continued integration of technology into people's lives, saving digital information has become an everyday facet of human behavior. In the present research, we examined the consequences of saving certain information on the ability to learn and remember other information. Results from three experiments showed that saving one file before studying a new file significantly improved memory for the contents of the new file. Notably, this effect was not observed when the saving process was deemed unreliable or when the contents of the to-be-saved file were not substantial enough to interfere with memory for the new file. These results suggest that saving provides a means to strategically off-load memory onto the environment in order to reduce the extent to which currently unneeded to-be-remembered information interferes with the learning and remembering of other information. © The Author(s) 2014.

  19. Resource planning of solid waste materials through process modelling as contribution to sustainable resource management; Ressourcenplanung fester Abfallstoffe mit Hilfe der Prozessmodellierung als Beitrag zum nachhaltigen Ressourcenmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Pehlken, Alexandra [Bremen Univ. (Germany). BIK, Institut fuer integrierte Produktentwicklung

    2010-10-15

    Raw materials are essential to satisfy our needs in energy and products. Many raw materials are restricted and far away from being endless available; therefore there is a strong intention of developing raw material- and energy-efficient production processes. Recycling processes provide a substantial contribution to sustainable resource management due to the supply of valuable secondary raw materials for new applications. Processing solid waste materials generate new secondary resources from residues as resources for new products. This saves primary resources and keeps up a long material life cycle. But material characterisation is an important issue to look at. Material properties ascertain the following application possibilities. It has to be noted that no processing technique can guarantee solely material flows with properties to substitute primary raw materials. There are always material flows that are of minor quality. This makes it difficult to assess the future potential of secondary raw materials to be available for following applications with specific quality demands. (orig.)

  20. Measured energy savings and cost-effectiveness of conservation retrofits in commercial buildings

    International Nuclear Information System (INIS)

    Greely, K.M.; Harris, J.P.; Hatcher, A.M.

    1990-01-01

    In this study, the authors examine the measured savings and cost-effectiveness of 447 commercial retrofit projects in the US, Canada, and Europe, representing over 1,700 buildings. For these projects, they examine savings and cost-effectiveness by building type and retrofit strategy, savings from individual measures, peak electric demand savings, comparisons of measured vs. predicted savings, and the persistence of savings in the years following a retrofit. Median annual site energy savings amounted to 20 kBtu/ft 2 , or 18% of whole-building usage; median retrofit cost was $0.56/ft 2 (1988 $), the median payback time was 3.1 years, and the median cost of conserved energy was $3.10/site MBtu. When examined by retrofit strategy, they found that projects with only HVAC and/or lighting retrofits had median payback times of one to three years, while those affecting the building shell, either alone or in combination with other types of measures, had payback times of five or more years. Projects in which only maintenance practices were changed typically saved 12% of their pre-retrofit consumption, often using in-house labor. Their research suggests that, despite significant savings and short payback times for the majority of projects, optimum savings are often not being achieved, due to limited owner willingness to invest in all cost-effective measures, as well as to improper retrofit installation and/or maintenance. A comprehensive understanding of energy management as a process is needed, including both inspection and commissioning of installed retrofits and ongoing tracking of energy consumption as an indicator of operating problems

  1. Exploring the time-saving bias: How drivers misestimate time saved when increasing speed

    Directory of Open Access Journals (Sweden)

    Eyal Peer

    2010-12-01

    Full Text Available According to the time-saving bias, drivers underestimate the time saved when increasing from a low speed and overestimate the time saved when increasing from a relatively high speed. Previous research used a specific type of task --- drivers were asked to estimate time saved when increasing speed and to give a numeric response --- to show this. The present research conducted two studies with multiple questions to show that the time-saving bias occurs in other tasks. Study 1 found that drivers committed the time-saving bias when asked to estimate (a the time saved when increasing speed or (b the distance that can be completed at a given time when increasing speed or (c the speed required to complete a given distance in decreasing times. Study 2 showed no major differences in estimations of time saved compared to estimations of the remaining journey time and also between responses given on a numeric scale versus a visual analog scale. Study 3 tested two possible explanations for the time-saving bias: a Proportion heuristic and a Differences heuristic. Some evidence was found for use of the latter.

  2. Saving water? : analysis of options for rice-based farms in Tamil Nadu, India

    NARCIS (Netherlands)

    Senthilkumar, K.

    2008-01-01

    Keywords: Modified rice cultivation, Water-saving, Farm typology, Technology adoption, Policy interventions, Farmers livelihoods, Resource use efficiency and Linear programming.

    The looming water crisis and water-intensive nature of rice cultivation are driving the search for alternative

  3. Psychological determinants of financial buffer saving : The influence of financial risk tolerance and regulatory focus

    NARCIS (Netherlands)

    Magendans, J.; Gutteling, Jan M.; Zebel, Sven

    With governments redistributing more responsibilities unto citizens, individuals have an increasing need for financial resources acting as a buffer against life’s setbacks and unexpected expenditures. The purpose of this study was to examine psychological determinants of saving for a financial

  4. Paternity leave in Sweden: costs, savings and health gains.

    Science.gov (United States)

    Månsdotter, Anna; Lindholm, Lars; Winkvist, Anna

    2007-06-01

    The initial objective is to examine the relationship between paternity leave in 1978-1979 and male mortality during 1981-2001, and the second objective is to calculate the cost-effectiveness of the 1974 parental insurance reform in Sweden. Based on a population of all Swedish couples who had their first child together in 1978 (45,801 males), the risk of death for men who took paternity leave, compared with men who did not, was estimated by odds ratios. The cost-effectiveness analysis considered costs for information, administration and production losses, minus savings due to decreased sickness leave and inpatient care, compared to health gains in life-years and quality-adjusted life-years (QALYs). It is demonstrated that fathers who took paternity leave have a statistically significant decreased death risk of 16%. Costs minus savings (discounted values) stretch from a net cost of EUR 19 million to a net saving of EUR 11 million, and the base case cost-effectiveness is EUR 8000 per QALY. The study indicates that that the right to paternity leave is a desirable reform based on commonly stated public health, economic, and feminist goals. The critical issue in future research should be to examine impact from health-related selection.

  5. Saving lives and saving money: hospital-based violence intervention is cost-effective.

    Science.gov (United States)

    Juillard, Catherine; Smith, Randi; Anaya, Nancy; Garcia, Arturo; Kahn, James G; Dicker, Rochelle A

    2015-02-01

    Victims of violence are at significant risk for injury recidivism, including fatality. We previously demonstrated that our hospital-based violence intervention program (VIP) resulted in a fourfold reduction in injury recidivism, avoiding trauma care costs of $41,000 per injury. Given limited trauma center resources, assessing cost-effectiveness of interventions is fundamental to inform use of these programs in other institutions. This study examines the cost-effectiveness of hospital-based VIP. We used a decision tree and Markov disease state modeling to analyze cost utility for a hypothetical cohort of violently injured subjects, comparing VIP versus no VIP at a trauma center. Quality-adjusted life-years (QALYs) were calculated using differences in mortality and published health state utilities. Costs of trauma care and VIP were obtained from institutional data, and risk of recidivism with and without VIP were obtained from our trial. Outcomes were QALYs gained and net costs over a 5-year horizon. Sensitivity analyses examined the impact of uncertainty in input values on results. VIP results in an estimated 25.58 QALYs and net costs (program plus trauma care) of $5,892 per patient. Without VIP, these values are 25.34 and $5,923, respectively, suggesting that VIP yields substantial health benefits (24 QALYs) and savings ($4,100) if implemented for 100 individuals. In the sensitivity analysis, net QALYs gained with VIP nearly triple when the injury recidivism rate without VIP is highest. Cost-effectiveness remained robust over a range of values; $6,000 net cost savings occur when 5-year recidivism rate without VIP is at 7%. VIP costs less than having no VIP with significant gains in QALYs especially at anticipated program scale. Across a range of plausible values at which VIP would be less cost-effective (lower injury recidivism, cost of injury, and program effectiveness), VIP still results in acceptable cost per health outcome gained. VIP is effective and cost

  6. THE PUZZLE OF SIMULTANEOUS SAVINGS AND DEBTS

    Directory of Open Access Journals (Sweden)

    RODICA IANOLE

    2012-05-01

    Full Text Available „Neither a borrower nor a lender be” recommends Shakespeare in Hamlet. The advice seems particularly interesting in nowadays society where a person can be easily found in both approximate situations, in the same time. It goes without saying that saving and borrowing do not describe mutually exclusive strategies of financial management and thus many people retain savings or carry on saving at the same time as having debts. We add to this fact a more pragmatically wisdom, the one of the economist Robert Solow -“We (economists think of wealth as fungible; we think a dollar is a dollar. Why don't they (the others do so?” (Solow, 1987 – and we naturally ask ourselves if the mechanism of having simultaneous savings and debts is a rational one, according to traditional economics.Making appeal to the emerging body of behavioral economics literature we reach to the mental accounting theory to see if it can explain savings inclination versus debt inclination. The main research question we want to explore is the following: if mental accounting prevents people from spending money from one „mental account” on goods belonging to another one, will people – after using all their money from a given account – be willing to go into debt to buy goods belonging to this account in a situation when they still have money in other accounts?

  7. Short-Term Saved Leave Scheme

    CERN Multimedia

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

  8. Short-Term Saved Leave Scheme

    CERN Multimedia

    HR Department

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

  9. TRENDS IN RETIREMENT SAVING: EVIDENCE FROM AN ONLINE SURVEY OF ROMANIAN HOUSEHOLDS

    Directory of Open Access Journals (Sweden)

    GURAN (TEODORESCU ILEANA

    2015-04-01

    Full Text Available In the context of the population aging and the demographic crisis throughout Europe and the developed world, the public pension systems will become increasingly strained as the proportion of pensioners to the working population will continue to increase. Empirical evidence shows that individuals fail to save enough for retirement to compensate for the less than optimal level of public pensions, and thus are facing the risk of a decrease in the standard of living in their post-retirement years. This larger context makes the study of retirement saving behavior an important matter. The objective of this paper is to document current trends in retirement saving behavior from the data collected through an online survey of Romanian households. The survey was distributed as an online questionnaire that collected 1285 of responses. The survey’s objective was to document households’ financial situation, as well as other psychological and social factors that might explain saving behavior. The analysis of the survey results indicates that there is a gap between intentions and actions when it comes to retirement saving. This gap and the resulting suboptimal retirement saving rates are explained in behavioral economics literature by anomalies in the inter-temporal choices of individuals, subject to self-control issues. We will see to what extent this gap is due to self-control issues and to what extent it is explained by the current financial situation of individuals. We will also conclude about possible retirement saving behavior influencing factors and motives.

  10. Forecasting the demand on solar water heating systems and their energy savings potential during the period 2001-2005 in Jordan

    International Nuclear Information System (INIS)

    Kablan, M.M.

    2003-01-01

    Jordan is an example of a developing country that depends almost exclusively on imported oil. Luckily, Jordan is blessed with good solar energy resources. However, only 24% of Jordanian families are installing solar water heating systems (SWHS). The objective of this research is to forecast the yearly demand on SWHS by the household sector during the period 2001-2005 and to compute the potential energy savings throughout the investigated period due to the use of SWHS. It is found that the net energy collected over the entire investigated period is about 1454.4 million kW h. In addition, the capital savings over the entire investigated period is estimated to be 46.28 million US$ if SWHS are used to heat water instead of the commonly used LPG gas cookers. The results of the research may assist decision makers in the energy sector to implement more comprehensive plans that encourage more families to install SWHS and save on imported oil

  11. A statistical analysis of the energy policy act of 2005, its changes to the daylight saving program, and impact on residential energy consumption

    Science.gov (United States)

    Murray, Patrick L.

    Government programs designed to decrease resource consumption, improve productivity and capitalize on extended daylight hours in the summer have been developed and implemented throughout the world for nearly three hundred years. In 2005, The United States government adopted an extended daylight savings program that increases the number of weeks where the country observes Daylight Saving Time (DST) from 31 to 35 weeks. The program took effect in March 2007. Arguments in support of DST programs highlight the portion of electricity consumption attributed to residential lighting in the evening hours. Adjusting clocks forward by one hour in summer months is believed to reduce electricity consumption due to lighting and therefore significantly reduce residential energy consumption during the period of DST. This paper evaluates the efficacy of the changes to DST resulting from the Energy Policy Act of 2005. The study focuses on changes to household electricity consumption during the extended four weeks of DST. Arizona, one of two states that continue to opt out of DST serves as the study's control for a comparison with neighboring states, Colorado, Nebraska, Nevada, New Mexico, Oklahoma, Texas and Utah. Results from the regression analysis of a Difference in Difference model indicate that contrary to evaluations by Congress and the Department of Energy, the four week period of Extended Daylight Saving Time does not produce a significant decrease in per capita electricity consumption in Southwestern states.

  12. Saving for Success: Financial Education and Savings Goal Achievement in Individual Development Accounts

    Science.gov (United States)

    Grinstead, Mary L.; Mauldin, Teresa; Sabia, Joseph J.; Koonce, Joan; Palmer, Lance

    2011-01-01

    Using microdata from the American Dream Demonstration, the current study examines factors associated with savings and savings goal achievement (indicated by a matched withdrawal) among participants of individual development account (IDA) programs. Multinomial logit results show that hours of participation in financial education programs, higher…

  13. Directions of organisational and low-cost energy saving of engineering enterprises

    Directory of Open Access Journals (Sweden)

    Dzhedzhula Viacheslav V.

    2014-01-01

    Full Text Available The article analyses directions of energy saving of industrial enterprises. Taking into account the tendency to continuous growth of cost of energy resources, introduction of measures that would allow reduction of energy consumption of enterprises is an urgent task. One of the most important obstacles in the process of introduction of energy efficient solutions are fund limits and low awareness of owners and managers of industrial enterprises. The article offers a new classification of energy saving measures: apart from traditional expense and organisation measures it introduces the low-cost measures notion. It offers to consider low-cost those measures that are realised by the enterprise by means of own funds, moreover, their repayment term is not more than one year. It offers analytical expression for identification of annual funds saving from introduction of low-cost measures. It considers the process of identification of saving of funds from introduction of some of the main low-cost measures in detail: replacement of lighting units, balancing of ventilation networks and elimination of water leakages from pipelines and water supply equipment. Based on the analysis of bibliography information the article provides a list of main measures on energy saving, which could be referred to the low-cost ones. The proposed approaches would allow paying more attention to practical aspects of realisation of the concept of energy saving in the industry.

  14. Telephone-based disease management: why it does not save money.

    Science.gov (United States)

    Motheral, Brenda R

    2011-01-01

    To understand why the current telephone-based model of disease management (DM) does not provide cost savings and how DM can be retooled based on the best available evidence to deliver better value. Literature review. The published peer-reviewed evaluations of DM and transitional care models from 1990 to 2010 were reviewed. Also examined was the cost-effectiveness literature on the treatment of chronic conditions that are commonly included in DM programs, including heart failure, diabetes mellitus, coronary artery disease, and asthma. First, transitional care models, which have historically been confused with commercial DM programs, can provide credible savings over a short period, rendering them low-hanging fruit for plan sponsors who desire real savings. Second, cost-effectiveness research has shown that the individual activities that constitute contemporary DM programs are not cost saving except for heart failure. Targeting of specific patients and activity combinations based on risk, actionability, treatment and program effectiveness, and costs will be necessary to deliver a cost-saving DM program, combined with an outreach model that brings vendors closer to the patient and physician. Barriers to this evidence-driven approach include resources required, marketability, and business model disruption. After a decade of market experimentation with limited success, new thinking is called for in the design of DM programs. A program design that is based on a cost-effectiveness approach, combined with greater program efficacy, will allow for the development of DM programs that are cost saving.

  15. Public-opinion poll on energy saving

    International Nuclear Information System (INIS)

    1982-01-01

    A public-opinion poll was carried out on energy saving from November 26 to December 2, 1981, across the country. The number of persons participated in the survey was 5,000, whose age was 20 and above. The recovery ratio was 4,007 persons (80.1 %). The results of the survey and also the question-answer form are given with respective percentages. The questions were in the following three categories: (1) cognizance of energy saving - space-heating temperature, energy saving conscience use of private cars, purchase of highenergy consumption appliances; (2) energy for future - energy consumption, energy consumption trend, new types of energy, main sources of power generation, nuclear power in the overall electric power, apprehension toward nuclear power plants, safety measures in nuclear power plants; (3) governmental energy policy measures. (J.P.N.)

  16. An energy saving system for hospital laundries

    Energy Technology Data Exchange (ETDEWEB)

    Katsanis, J.S.; Tsarabaris, P.T.; Polykrati, A.D.; Proios, A.N. [National Technical Univ. of Athens, Athens (Greece). School of Electrical and Computer Engineering; Koufakis, E.I. [Public Power Corp. S.A., Crete (Greece)

    2009-07-01

    Hospital laundries are one of the largest consumers of water and electrical and thermal energy. This paper examined the energy savings achieved by a system using the hot wastewater from the washing process. Hospital laundries consume thermal energy using steam, which is produced in boilers by burning diesel oil or natural gas. Electrical energy for the mechanical drives, ventilation and also the lighting required in the laundry area are big consumers of energy. The paper presented the proposed system and discussed the parameters of the system and system dimensioning. The paper also provided and discussed an interpretation of steam and energy savings. The proposed system was considered to be economically viable, simple in its construction, installation and operation. From the application of the suggested system, the cost savings resulted in a satisfactory payback period for the capital invested of approximately three to five years. 14 refs., 4 tabs., 2 figs.

  17. Keys to the House: Unlocking Residential Savings With Program Models for Home Energy Upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Grevatt, Jim [Energy Futures Group (United States); Hoffman, Ian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoffmeyer, Dale [US Department of Energy, Washington, DC (United States)

    2017-07-05

    After more than 40 years of effort, energy efficiency program administrators and associated contractors still find it challenging to penetrate the home retrofit market, especially at levels commensurate with state and federal goals for energy savings and emissions reductions. Residential retrofit programs further have not coalesced around a reliably successful model. They still vary in design, implementation and performance, and they remain among the more difficult and costly options for acquiring savings in the residential sector. If programs are to contribute fully to meeting resource and policy objectives, administrators need to understand what program elements are key to acquiring residential savings as cost effectively as possible. To that end, the U.S. Department of Energy (DOE) sponsored a comprehensive review and analysis of home energy upgrade programs with proven track records, focusing on those with robustly verified savings and constituting good examples for replication. The study team reviewed evaluations for the period 2010 to 2014 for 134 programs that are funded by customers of investor-owned utilities. All are programs that promote multi-measure retrofits or major system upgrades. We paid particular attention to useful design and implementation features, costs, and savings for nearly 30 programs with rigorous evaluations of performance. This meta-analysis describes program models and implementation strategies for (1) direct install retrofits; (2) heating, ventilating and air-conditioning (HVAC) replacement and early retirement; and (3) comprehensive, whole-home retrofits. We analyze costs and impacts of these program models, in terms of both energy savings and emissions avoided. These program models can be useful guides as states consider expanding their strategies for acquiring energy savings as a resource and for emissions reductions. We also discuss the challenges of using evaluations to create program models that can be confidently applied in

  18. Water resources

    International Nuclear Information System (INIS)

    2002-01-01

    The report entitled Climate Change Impacts and Adaptation : A Canadian Perspective, presents a summary of research regarding the impacts of climate change on key sectors over the past five years as it relates to Canada. This chapter on water resources describes how climate change will affect the supply of water in Canada. Water is one of Canada's greatest resources, which contributes about $7.5 to 23 billion per year to the Canadian economy. The decisions taken to adapt to climate change within the water resources sector will have profound implications in many other areas such as agriculture, human health, transportation and industry. The water related problems include water quality issues that relate to water shortages from droughts, or excesses from floods. The Intergovernmental Panel on Climate Change forecasts an increase in global average surface air temperatures of 1.4 to 5.8 degrees C by 2100. Such a change would impact the hydrological cycle, affecting runoff, evaporation patterns, and the amount of water stored in glaciers, lakes, wetlands and groundwater. The uncertainty as to the magnitude of these changes is due to the difficulty that climate models have in projecting future changes in regional precipitation patterns and extreme events. This chapter presents potential impacts of climate change on water resources in the Yukon, British Columbia, the Prairies, the Great Lakes basin, the Atlantic provinces, and the Arctic and Subarctic. The associated concerns for each region were highlighted. Adaptation research has focused on the impacts of supply and demand, and on options to adapt to these impacts. 60 refs., 2 tabs., 1 fig

  19. Economic Energy Savings Potential in Federal Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Daryl R.; Dirks, James A.; Hunt, Diane M.

    2000-09-04

    The primary objective of this study was to estimate the current life-cycle cost-effective (i.e., economic) energy savings potential in Federal buildings and the corresponding capital investment required to achieve these savings, with Federal financing. Estimates were developed for major categories of energy efficiency measures such as building envelope, heating system, cooling system, and lighting. The analysis was based on conditions (building stock and characteristics, retrofit technologies, interest rates, energy prices, etc.) existing in the late 1990s. The potential impact of changes to any of these factors in the future was not considered.

  20. Savings in its sights for Somerset Trust.

    Science.gov (United States)

    Russell, Colin

    2011-10-01

    Colin Russell, healthcare specialist at Schneider Electric (pictured), explains how the company has recently worked with Taunton and Somerset NHS Foundation Trust to implement a major energy-saving project at the Trust's Musgrove Park Hospital in Taunton. He argues that, at a time when all areas of the service are being asked to reduce costs, such partnerships can potentially save the institution millions of pounds and significantly reduce carbon emissions, while "revitalising" parts of the NHS estate, and ensuring continuity of vital hospital services for facilities managers.

  1. Nuclear recycling: costs, savings, and safeguards

    International Nuclear Information System (INIS)

    Spinrad, B.I.

    1985-01-01

    This chapter discusses the economics, physical and chemical processes, and safety of nuclear fuel recycling. The spent fuel must be chemically reprocessed in order to recover uranium and plutonium. Topics considered include indifference costs, recycling in light water reactors (LWRs), plutonium in fast reactors, the choice between recycling and storage, safeguards, and weapons proliferation. It is shown that the economics of recycling nuclear fuel involves the actual costs and savings of the recycling operation in terms of money spent, made, and saved, and the impact of the recycling on the future cost of uranium

  2. Raising household saving: does financial education work?

    Science.gov (United States)

    Gale, William G; Harris, Benjamin H; Levine, Ruth

    2012-01-01

    This article highlights the prevalence and economic outcomes of financial illiteracy among American households, and reviews previous research that examines how improving financial literacy affects household saving. Analysis of the research literature suggests that previous financial literacy efforts have yielded mixed results. Evidence suggests that interventions provided for employees in the workplace have helped increase household saving, but estimates of the magnitude of the impact vary widely. For financial education initiatives targeted to other groups, the evidence is much more ambiguous, suggesting a need for more econometrically rigorous evaluations.

  3. Financing aspects of electricity saving's in Brazil

    International Nuclear Information System (INIS)

    Pacca, S.A.; Sauer, I.L.

    1996-01-01

    Programs regarding to energy saving in Brasil arised by the early 80's from the concern with oil products consumption. The situation has changed and electricity is growing in importance when energy conservation is discussed. Thus, the government, following examples from abroad, has been trying to overcome the barriers that obstruct a massive process evolution towards energy saving, since the potential is spread out in many society segments. One important issue is related to financing energy conservation. This paper attempts to analyze the utilities efforts allied to public and private banks investments towards energy conservation financing. (author)

  4. Estimating the cost of saving electricity through U.S. utility customer-funded energy efficiency programs

    International Nuclear Information System (INIS)

    Hoffman, Ian M.; Goldman, Charles A.; Rybka, Gregory; Leventis, Greg; Schwartz, Lisa; Sanstad, Alan H.; Schiller, Steven

    2017-01-01

    The program administrator and total cost of saved energy allow comparison of the cost of efficiency across utilities, states, and program types, and can identify potential performance improvements. Comparing program administrator cost with the total cost of saved energy can indicate the degree to which programs leverage investment by participants. Based on reported total costs and savings information for U.S. utility efficiency programs from 2009 to 2013, we estimate the savings-weighted average total cost of saved electricity across 20 states at $0.046 per kilowatt-hour (kW h), comparing favorably with energy supply costs and retail rates. Programs targeted on the residential market averaged $0.030 per kW h compared to $0.053 per kW h for non-residential programs. Lighting programs, with an average total cost of $0.018 per kW h, drove lower savings costs in the residential market. We provide estimates for the most common program types and find that program administrators and participants on average are splitting the costs of efficiency in half. More consistent, standardized and complete reporting on efficiency programs is needed. Differing definitions and quantification of costs, savings and savings lifetimes pose challenges for comparing program results. Reducing these uncertainties could increase confidence in efficiency as a resource among planners and policymakers. - Highlights: • The cost of saved energy allows comparisons among energy resource investments. • Findings from the most expansive collection yet of total energy efficiency program costs. • The weighted average total cost of saved electricity was $0.046 for 20 states in 2009–2013. • Averages in the residential and non-residential sectors were $0.030 and $0.053 per kW h, respectively. • Results strongly indicate need for more consistent, reliable and complete reporting on efficiency programs.

  5. Saving water to save the environment: Contrasting the effectiveness of environmental and monetary appeals in a residential water saving intervention

    NARCIS (Netherlands)

    Tijs, M.S.; Karremans, J.C.T.M.; Veling, H.P.; Lange, M.A. de; Meegeren, P. van; Lion, R.

    2017-01-01

    To convince people to reduce their energy consumption, two types of persuasive appeals often are used by environmental organizations: Monetary appeals (i.e., 'conserving energy will save you money') and environmental appeals (i.e., 'conserving energy will protect the environment'). In this field

  6. Energy Efficiency Resources to Support State Energy Planning

    Energy Technology Data Exchange (ETDEWEB)

    Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

    2017-06-01

    An early step for most energy efficiency planning is to identify and quantify energy savings opportunities, and then to understand how to access this potential. The U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy offers resources that can help with both of these steps. This fact sheet presents those resources. The resources are also available on the DOE State and Local Solution Center on the "Energy Efficiency: Savings Opportunities and Benefits" page: https://energy.gov/eere/slsc/energy-efficiency-savings-opportunities-and-benefits.

  7. Taxation and the household saving rate: evidence from OECD countries

    Directory of Open Access Journals (Sweden)

    Vito Tanzi

    2000-03-01

    Full Text Available This paper analyzes anew the relationship between taxation and the household saving rate. On the basis of standard savings and tax revenue data from a sample of OECD countries, it provides compelling empirical evidence of a powerful impact of taxes on household savings. In particular, income taxes are shown to affect negatively the household saving rate much more than consumption taxes.

  8. 12 CFR 541.18 - Interim Federal savings association.

    Science.gov (United States)

    2010-01-01

    ... an existing savings and loan holding company or to facilitate any other transaction the Office may... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Interim Federal savings association. 541.18... REGULATIONS AFFECTING FEDERAL SAVINGS ASSOCIATIONS § 541.18 Interim Federal savings association. The term...

  9. 49 CFR 173.219 - Life-saving appliances.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Life-saving appliances. 173.219 Section 173.219... Life-saving appliances. (a) A life-saving appliance, self-inflating or non-self-inflating, containing small quantities of hazardous materials that are required as part of the life-saving appliance must...

  10. Targeting utility customers to improve energy savings from conservation and efficiency programs

    International Nuclear Information System (INIS)

    Taylor, Nicholas W.; Jones, Pierce H.; Kipp, M. Jennison

    2014-01-01

    Highlights: • Improving DSM program impacts by targeting high energy users. • DSM energy savings potential hinges on pre-participation performance. • Targeting can benefit different utilities and energy efficiency programs. • Overall performance can be improved by up to 250% via targeting strategies. - Abstract: Electric utilities, government agencies, and private interests in the US have committed and continue to invest substantial resources – including billions of dollars of financial capital – in the pursuit of energy efficiency and conservation through demand-side management (DSM) programs. While most of these programs are deemed to be cost effective, and therefore in the public interest, opportunities exist to improve cost effectiveness by targeting programs to those customers with the greatest potential for energy savings. This article details an analysis of three DSM programs offered by three Florida municipal electric utilities to explore such opportunities. First, we estimate programs’ energy savings impacts; second, we measure and compare energy savings across subgroups of program participants as determined by their pre-intervention energy performance, and third, we explore potential changes in program impacts that might be realized by targeting specific customers for participation in the DSM programs. All three programs resulted in statistically significant average (per-participant) energy savings, yet average savings varied widely, with the customers who performed best (i.e., most efficient) before the intervention saving the least energy and those who performed worst (i.e., least efficient) before the intervention saving the most. Assessment of alternative program participation scenarios with varying levels of customer targeting suggests that program impacts could be increased by as much as 80% for a professional energy audit program, just over 100% for a high-efficiency heat pump upgrade program, and nearly 250% for an attic insulation

  11. The economic value of remote sensing of earth resources from space: An ERTS overview and the value of continuity of service. Volume 3: Intensive use of living resources: Agriculture. Part 1: Overview

    Science.gov (United States)

    Kornhauser, A. L.; Wilson, L. B.

    1974-01-01

    Potential economic benefits obtainable from a state-of-the-art ERS system in the resource area of intensive use of living resources, agriculture, are studied. A spectrum of equal capability (cost saving), increased capability, and new capability benefits are quantified. These benefits are estimated via ECON developed models of the agricultural marketplace and include benefits of improved production and distribution of agricultural crops. It is shown that increased capability benefits and new capability benefits result from a reduction of losses due to disease and insect infestation given ERS's capability to distinguish crop vigor and from the improvement in world trade negotiations given ERS's worldwide surveying capability.

  12. 12 CFR 575.10 - Acquisition and disposition of savings associations, savings and loan holding companies, and...

    Science.gov (United States)

    2010-01-01

    ... associations, savings and loan holding companies, and other corporations by mutual holding companies. 575.10... COMPANIES § 575.10 Acquisition and disposition of savings associations, savings and loan holding companies... savings and loan holding company in the stock form that is not a subsidiary holding company, provided the...

  13. Boiler house modernization through shared savings program

    Energy Technology Data Exchange (ETDEWEB)

    Breault, R.W. [Tecogen, Waltham, MA (United States)

    1995-12-31

    Throughout Poland as well as the rest of Eastern Europe, communities and industries rely on small heat only boilers to provide district and process heat. Together these two sectors produce about 85,000 MW from boilers in the 2 to 35 MW size range. The bulk of these units were installed prior to 1992 and must be completely overhauled to meet the emission regulations which will be coming into effect on January 1, 1998. Since the only practical fuel is coal in most cases, these boilers must be either retrofit with emission control technology or be replaced entirely. The question that arises is how to accomplish this given the current tight control of capital in Poland and other East European countries. A solution that we have for this problem is shared savings. These boilers are typically operating with a quiet low efficiency as compared to western standards and with excessive manual labor. Installing modernization equipment to improve the efficiency and to automate the process provides savings. ECOGY provides the funds for the modernization to improve the efficiency, add automation and install emission control equipment. The savings that are generated during the operation of the modernized boiler system are split between the client company and ECOGY for a number of years and then the system is turned over in entirety to the client. Depending on the operating capacity, the shared savings agreement will usually span 6 to 10 years.

  14. Save Beady Kid from the Sun

    Science.gov (United States)

    Demetrikopoulos, Melissa; Thompson, Wesley; Pecore, John

    2017-01-01

    Art and science help students investigate light energy and practice fair testing. With the goal of finding a way to save "Beady Kid" from invisible rays, students used science practices to investigate the transfer of light energy from the Sun. During this art-integrated science lesson presented in this article, upper elementary (grades…

  15. Water savings through off-farm employment?

    NARCIS (Netherlands)

    Wachong Castro, V.; Heerink, N.; Shi, X.; Qu, W.

    2010-01-01

    Purpose – The purpose of this paper is to gain more insight into the relationship between off-farm employment of rural households and water-saving investments and irrigation water use in rural China. Design/methodology/approach – Data from a survey held among 317 households in Minle County, Zhangye

  16. Use staff wisely to save NHS money.

    Science.gov (United States)

    Moore, Alison

    2015-12-09

    The NHS could save up to £ 2 billion a year by improving workflow and containing workforce costs, according to Labour peer Lord Carter's review of NHS efficiency. Changes in areas such as rostering and management of annual leave must avoid increasing the pressure on staff.

  17. Tip Saves Energy, Money for Pennsylvania Plant

    Science.gov (United States)

    A wastewater treatment plant in Berks County, Pennsylvania is saving nearly $45,000 a year and reducing hundreds of metric tons of greenhouse gases since employing an energy conservation tip offered by the Water Protection Division in EPA’s R3 and PADEP.

  18. How to save money on medicines

    Science.gov (United States)

    U.S. Food and Drug Administration (FDA) website. Saving money on prescription drugs. www.fda.gov/Drugs/EmergencyPreparedness/BioterrorismandDrugPreparedness/ucm134215.htm . Updated May 4, 2016. Accessed October 14, 2016. U.S. Food and Drug ...

  19. Energy saving baking methods. Energibesparende bagemetoder

    Energy Technology Data Exchange (ETDEWEB)

    Gry, P.

    1988-01-01

    The project ''Energy Saving Baking Methods'', run as part of the Energy Research Project-1984, and has as its aim to investigate potentials for energy saving by employing microwaves in the baking process. The project is a follow-up of the Nordic Industry Fund project which was completed in 1983. Smaller test ovens with IR long waves, warm air convection and microwaves of 2,47 GHz were used. Measurements of heat distribution from all three energy sources have been made. Extensive experiments have been carried out in order to develope baking methods for white loaves which are energy saving, but where the quality of the bread does not undergo any form of deterioration. Tests were made using microwaves alone, and in combination with hot air and IR. A resulting saving 35% baking time was achieved, and a further reduction of baking time can be reached where a greater improvement of energy distribution can take place, especially in the case of microwaves and IR. (AB).

  20. Savings impact of a corporate energy manager

    International Nuclear Information System (INIS)

    Sikorski, B.D.; O'Donnell, B.A.

    1999-01-01

    This paper discusses the cost savings impact of employing an energy manager with a 16,000-employee corporation. The corporation, Canada's second largest airline, is currently operating nearly 3,000,000 ft 2 of mixed-use facilities spread across the country, with an annual energy budget for ground facilities of over Cdn $4,000,000. This paper outlines the methodology used by the energy manager to deploy an energy management program over a two-year period between April 1995 and May 1997. The paper examines the successes and the lessons learned during the period and summarizes the costs and benefits of the program. The energy manager position was responsible for developing an energy history database with more than 100 active accounts and for monitoring and verifying energy savings. The energy manager implemented many relatively low-cost energy conservation measures, as well as some capital projects, during the first two years of the program. In total, these measures provided energy cost savings of $210,000 per year, or 5% of the total budget. In each case, technologies installed as part of the energy retrofit projects provided not only cost savings but also better control, reduced maintenance, and improved working conditions for employees

  1. Food Processing Contracts: Savings for Schools.

    Science.gov (United States)

    Van Egmond-Pannell, Dorothy

    1983-01-01

    Food processing contracts between schools and food manufacturers can result in huge cost savings. Fairfax County, Virginia, is one of 30 "letter of credit" sites in a three-year study of alternatives. After one year it appears that schools can purchase more for the dollar in their local areas. (MD)

  2. How Palo Verde saved millions of dollars

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    In autumn 1992, Arizona Public Service adopted new project control procedures for outages at its three-unit Palo Verde PWR site, including: the switch to a PC-based environment; a new scheduling system; and the generation of improved graphics for decision making. Major cost savings were made and three further outages have now benefitted from the new systems. (author)

  3. Communication Can Save Lives PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    This 60 second public service announcement (PSA) is based on the August 2015 CDC Vital Signs report. Antibiotic-resistant germs cause at least 23,000 deaths each year. Learn how public health authorities and health care facilities can work together to save lives.

  4. Finding Savings in Community Use of Schools

    Science.gov (United States)

    Gandy, Julia

    2013-01-01

    This article reports on the growing challenge of managing community groups using educational facilities for meetings, athletics, and special events. It describes how, by using an online scheduling software program, one school district was able to track payments and save time and money with its event and facility scheduling process.

  5. Opinion: Composition Studies Saves the World!

    Science.gov (United States)

    Bizzell, Patricia

    2009-01-01

    Stanley Fish in his new book ["Save the World on Your Own Time" (New York: Oxford UP,2008)] says that composition studies presents "the clearest example" of what is desperately wrong in the academy, because in writing classrooms, he says, "more often than not anthologies of provocative readings take center stage and the actual teaching of writing…

  6. Estimates of Savings Achievable from Irrigation Controller

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Alison; Fuchs, Heidi; Whitehead, Camilla Dunham

    2014-03-28

    This paper performs a literature review and meta-analysis of water savings from several types of advanced irrigation controllers: rain sensors (RS), weather-based irrigation controllers (WBIC), and soil moisture sensors (SMS).The purpose of this work is to derive average water savings per controller type, based to the extent possible on all available data. After a preliminary data scrubbing, we utilized a series of analytical filters to develop our best estimate of average savings. We applied filters to remove data that might bias the sample such as data self-reported by manufacturers, data resulting from studies focusing on high-water users, or data presented in a non-comparable format such as based on total household water use instead of outdoor water use. Because the resulting number of studies was too small to be statistically significant when broken down by controller type, this paper represents a survey and synthesis of available data rather than a definitive statement regarding whether the estimated water savings are representative.

  7. Analysis of savings mobilization determinants among rural ...

    African Journals Online (AJOL)

    The result showed that 90% were within the age group of 30 to 69 years while about 79% ... The average family size was six while about 37% of the sampled household heads had ... Key words: Savings mobilization, income and determinants ...

  8. Saving energy: bringing down Europe's enery prices

    NARCIS (Netherlands)

    Molenbroek, E.; Blok, K.

    2012-01-01

    In June 2011 the European Commission proposed a new Directive on Energy Efficiency. Its purpose is to put forward a framework to deliver the EU’s target of reducing its energy consumption by 20% by 2020. Currently, the EU is only on track to achieve half of those savings. Apart from the

  9. Reactors Save Energy, Costs for Hydrogen Production

    Science.gov (United States)

    2014-01-01

    While examining fuel-reforming technology for fuel cells onboard aircraft, Glenn Research Center partnered with Garrettsville, Ohio-based Catacel Corporation through the Glenn Alliance Technology Exchange program and a Space Act Agreement. Catacel developed a stackable structural reactor that is now employed for commercial hydrogen production and results in energy savings of about 20 percent.

  10. Exploring Demand Charge Savings from Commercial Solar

    Energy Technology Data Exchange (ETDEWEB)

    Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gagnon, Pieter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-07-31

    Commercial retail electricity rates commonly include a demand charge component, based on some measure of the customer’s peak demand. Customer-sited solar PV can potentially reduce demand charges, but the magnitude of these savings can be difficult to predict, given variations in demand charge designs, customer loads, and PV generation profiles. Moreover, depending on the circumstances, demand charges from solar may or may not align well with associated utility cost savings. Lawrence Berkeley National Laboratory (Berkeley Lab) and the National Renewable Energy Laboratory (NREL) are collaborating in a series of studies to understand how solar PV can reduce demand charge levels for a variety of customer types and demand charges designs. Previous work focused on residential customs with solar. This study, instead, focuses on commercial customers and seeks to understand the extent and conditions under which rooftop can solar reduce commercial demand charges. To answer these questions, we simulate demand charge savings for a broad range of commercial customer types, demand charge designs, locations, and PV system characteristics. This particular analysis does not include storage, but a subsequent analysis in this series will evaluate demand charge savings for commercial customers with solar and storage.

  11. Saving and credit cooperatives in Mexico

    Directory of Open Access Journals (Sweden)

    Martha E. Izquierdo Muciño

    2015-11-01

    Full Text Available The Saving service and Credit Popular (Cajas de Ahorro y Credito Popular first appeared in Mexico in 1951 at the initiative of the priest Pedro Velazquez, similar to the popular savings banks that existed in Canada, which had been founded by Alphonse Desjardins in the early XX century.These savings service (Cajas de Ahorro were developing successfully in almost all Mexican communities, most of them remained faithful to the principles and ordinances of the church that gave rise to them, without the government participate in this activity and without policies encouraging or regulatory actions. It was not until 1991 when the General Law of Organizations and Auxiliary Credit Activities (Ley General de Organizaciones y Actividades was enacted. However in 2000 they began to emerge problems arising from fraudulent activities by some people taking advantage of loopholes established irregular saving services. Consequently and in order to solve these problems was changing the law. The last of the fraud occurred with the popular financial called FICREA (2015, to which was amended regulatory law again and while thus sought to avoid another fraud, who really was affected is a large amount very poor indigenous and peasants.Received: 03.06.2015Accepted: 17.07.2015

  12. Acquiring energy savings in manufactured housing

    International Nuclear Information System (INIS)

    Davey, D.

    1993-01-01

    In 1991, the Northwest utilities faced a complex situation. They needed new sources of electrical power to avoid future deficits. A significant block of energy savings was available in the manufactured housing sector in the form of energy savings from increased insulation to new manufactured homes. The manufacturers were interested in saving the electricity in the homes, but would only deal with the utility sector as a whole. Half of the homes targeted were sited in investor-owned utility (IOU) service territories, and half in the public sector made up of utilities that purchased some or all of their electricity from the Bonneville Power Administration. Utilities agreed to acquire energy from manufacturers In the form of thermal efficiency measures specified by the Bonneville Power Administration. The program that resulted from over one year of negotiations was called the Manufactured Housing Acquisition Program, or MAP. Manufacturers, the utilities, State Energy Offices, the Northwest Power Planning Council and Bonneville all worked closely and with tenacity to build the program that went into effect on April 1, 1992, and should save the region between 7 and 9 megawatts, enough energy to supply 11,000 homes in the Northwest

  13. C. h. p. saves fuel in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Daugas, C F

    1979-04-01

    A combined heat and power plant based on a diesel generator to produce 12MW of electricity and 12MW of heat has successfully supplied the town of Skultuna in Sweden during the winter and has saved 3,700t of oil annually.

  14. Should Reformers Support Education Savings Accounts?

    Science.gov (United States)

    Ladner, Matthew; Smith, Nelson

    2016-01-01

    In this article, "Education Next" talks with Matthew Ladner and Nelson Smith on the topic of Education Savings Accounts (ESAs). ESAs apply the logic of school choice to the ever-expanding realm of education offerings. Rather than simply empowering families to select the school of their choice, ESAs provide families with most or all of…

  15. 78 FR 20097 - Energy Savings Performance Contracts

    Science.gov (United States)

    2013-04-03

    ... procedures, scope definition, Measurement and Verification (M&V), financing procurement, and definition of... government. More than $2.71 billion has been invested in Federal energy efficiency and renewable energy... more than $7.18 billion of cumulative energy cost savings for the Federal Government. While FEMP has...

  16. Advertising energy saving programs: The potential environmental cost of emphasizing monetary savings.

    Science.gov (United States)

    Schwartz, Daniel; Bruine de Bruin, Wändi; Fischhoff, Baruch; Lave, Lester

    2015-06-01

    Many consumers have monetary or environmental motivations for saving energy. Indeed, saving energy produces both monetary benefits, by reducing energy bills, and environmental benefits, by reducing carbon footprints. We examined how consumers' willingness and reasons to enroll in energy-savings programs are affected by whether advertisements emphasize monetary benefits, environmental benefits, or both. From a normative perspective, having 2 noteworthy kinds of benefit should not decrease a program's attractiveness. In contrast, psychological research suggests that adding external incentives to an intrinsically motivating task may backfire. To date, however, it remains unclear whether this is the case when both extrinsic and intrinsic motivations are inherent to the task, as with energy savings, and whether removing explicit mention of extrinsic motivation will reduce its importance. We found that emphasizing a program's monetary benefits reduced participants' willingness to enroll. In addition, participants' explanations about enrollment revealed less attention to environmental concerns when programs emphasized monetary savings, even when environmental savings were also emphasized. We found equal attention to monetary motivations in all conditions, revealing an asymmetric attention to monetary and environmental motives. These results also provide practical guidance regarding the positioning of energy-saving programs: emphasize intrinsic benefits; the extrinsic ones may speak for themselves. (c) 2015 APA, all rights reserved).

  17. Evaluation of Different Power Saving Techniques for MBMS Services

    Directory of Open Access Journals (Sweden)

    Antonios Alexiou

    2009-01-01

    Full Text Available Over the last years we have witnessed an explosive growth of multimedia computing, wireless communication and applications. Following the rapid increase in penetration rate of broadband services, the Third Generation Partnership Project (3GPP is currently standardizing the Evolved-Multimedia Broadcast/Multicast Service (E-MBMS framework of Long Term Evolution (LTE, the successor of Universal Mobile Telecommunications System (UMTS. MBMS constitutes a point-to-multipoint downlink bearer service that was designed to significantly decrease the required radio and wired link resources. However, several obstacles regarding the high-power requirements should be overcome for the realization of MBMS. Techniques, such as Macrodiversity Combining and Rate Splitting, could be utilized to reduce the power requirement of delivering multicast traffic to MBMS users. In this paper, we analytically present several power saving techniques and analyze their performance in terms of power consumption. We provide simulation results that reveal the amount of power that is saved and reinforce the need for the usage of such techniques.

  18. Tradable certificates for renewable electricity and energy savings

    International Nuclear Information System (INIS)

    Bertoldi, Paolo; Huld, Thomas

    2006-01-01

    Tradable green certificates (TGCs) schemes have been developed and tested in several European countries to foster market-driven penetration of renewables. These certificates guarantee that a specific volume of electricity is generated from renewable-energy source (RES). More recently certificates (tradable white certificates (TWCs)) for the electricity saved by demand-side energy-efficiency measures (EEMs) have been introduced in some European countries. Recent advances in information and communication technology have opened up new possibilities for improving energy efficiency and increasing utilization of RESs. Use of technological resources such as the Internet and smart metering can permit real-time issuing and trading of TGCs. These technologies could also permit issuing of TWC. This paper reviews current renewable TGC and TWCs schemes in Europe and describes the possibilities for combining them in an Internet-based system. In the proposed combined tradable certificate scheme, both RESs and demand-side EEMs could bid in real time through the Internet to meet a specific obligation. The energy savings from the demand-side measures would be equivalent to the same amount of green electricity production. The paper describes the needed common targets and obligations, the certificate trading rules and the possible monitoring protocol. In particular, the paper focuses on the TWCs verification issues, including the assessment of the baseline, as these poses additional problems for TWCs compared to TGCs. (author)

  19. Health care costs: saving in the private sector.

    Science.gov (United States)

    Robeson, F E

    1979-01-01

    Robeson offers a number of options to employers to help reduce the impact of increasing health care costs. He points out that large organizations which employ hundreds of people have considerable market power which can be exerted to contain costs. It is suggested that the risk management departments assume the responsibility for managing the effort to reduce the costs of medical care and of the health insurance programs of these organizations since that staff is experienced at evaluating premiums and negotiating with third-party payors. The article examines a number of short-run strategies for firms to pursue to contain health care costs: (1) use alternative delivery systems such as health maintenance organizations (HMOs) which have cost-cutting potential but require marketing efforts to persuade employees of their desirability; (2) contracts with third-party payors which require a second opinion (peer review), a practice which saved one labor union over $2 million from 1972 to 1976; (3) implementation of insurance coverage for less expensive outpatient care; and (4) the use of claims review. These strategies are compared in terms of four criteria: supply of demand for health services; management effort; cost; and time necessary for realized savings. Robeson concludes that development of a management plan for containing health care costs requires an extensive analysis of alternatives, organizational objectives, existing policies, and resources, and offers a table summarizing the cost-containment strategies that a firm should consider.

  20. Energy savings solutions: passive solar design in Iranian cold climate

    Energy Technology Data Exchange (ETDEWEB)

    Nassehzadeh Tabriz, Shahram [Department of Architecture, Miyaneh Branch, Islamic Azad University (Iran, Islamic Republic of)], email: sh_nassehzadeh@m-iau.ac.ir; Mahdavi Tabatabaei Fard, Fariborz [SABAT TARH CO. (Iran, Islamic Republic of)], email: sabat_arc@yahoo.com; Aliyev, Fagan [International Eco-energy Academy (Azerbaijan)], email: ie_academy@yahoo.com

    2011-07-01

    In recent years, there has been a significant increase in the cost of fuel gas, fuel oil and electricity and much thought has been given to the use of solar energy. Living in a solar heated house gives peace of mind and body and it makes good sense in mountainous regions. Severe winters in such regions make more energy for standard living activities in buildings necessary. This paper discusses passive solar building design as an energy saving solution. In this type of design, windows, walls and floors act as storage and distribution devices for solar energy in winter and deflect solar heat in summer. Passive solar design techniques influence the choice of building site, design and materials within the general framework of enriching the quality of life of the inhabitants. As a result, natural resources are saved and the environment is conserved for future generations. In conclusion, it is seen that passive design keeps a home cool and comfortable in summer and warm and cozy in winter with minimal heating and cooling requirements.

  1. 77 FR 43155 - Guidance on Due Diligence Requirements for Savings Associations in Determining Whether a...

    Science.gov (United States)

    2012-07-24

    ... and soundness principles and appropriate for the risk profile of the institution as well as the size...; [ssquf] Understand applicable market demographics/economics; and [ssquf] Understand current levels and... reporting systems. Safety and soundness principles warrant effective concentration risk management programs...

  2. 76 FR 78090 - Guidance on Due Diligence Requirements for Savings Associations in Determining Whether a...

    Science.gov (United States)

    2011-12-15

    ... and soundness principles and appropriate for the risk profile of the institution as well as the size... be supplemented with other third-party analytics; Understand applicable market demographics/economics... their monitoring and reporting systems. Safety and soundness principles warrant effective concentration...

  3. Investigation of fuel savings for an aircraft due to optimization of the center of gravity

    Science.gov (United States)

    Liu, Yitao; Yang, Zhenbo; Deng, Junxiang; Zhu, Junjie

    2018-03-01

    The aircraft’s center of gravity (CG) has a significant influence on the safety and efficiency, which are determined to a large degree by keeping the CG position within the forward and aft limits. Improper loading reduces the aerodynamics efficiency of an aircraft, resulting in higher flight drag. This paper focuses on the theoretical analysis of the influence of variable CG parameter on the fuel consumption. A new model is developed to predict the fuel consumption rate for an aircraft with it’s CG at different position. The numerical result indicates that a more aft CG position produces less drag and, in turn, requires less fuel consumption.

  4. Energy savings due to daylight and artificial lighting integration in office buildings in hot climate

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ashwal, Nagib T. [Sana' a University, Sana' a (Yemen); Budaiwi, Ismail M. [King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia)

    2011-07-01

    Reducing energy consumption while maintaining acceptable environmental quality in buildings has been a challenging task for building professionals. In office buildings, artificial lighting systems are a major consumer of energy and can significantly contribute to building cooling load. Furthermore, although reliable, artificial lighting does not necessarily provide the required quality of lighting. Significant improvement in lighting quality and energy consumption can be achieved by proper integration of daylight and artificial lighting. The objective of this study is to investigate the energy performance of office buildings resulting from daylight and artificial lighting integration in hot climates. A parametric analysis is conducted to find the impact of different window design parameters, including window area, height and glazing type, on building energy performance. Results have shown that as much as 35% reduction in lighting energy consumption and 13% reduction in total energy consumption can be obtained when proper daylighting and artificial lighting integration is achieved.

  5. A New Hybrid Bathroom System Based on Energy Saving Concept

    Directory of Open Access Journals (Sweden)

    Cui Bo-wen

    2016-01-01

    Full Text Available Based on the characteristics of hot water supply in bathroom, this article proposes a new hybrid energy hot water supply system. The programmable logic controller(PLC as the master controller was adopted in this system, which could automatically detect and storage main thermal physical of the system, such as temperature, water level, solar radiation intensity, power consumption and so on. The active thermal utilization technology of solar energy, air-source heat pump technology, solar energy intensive natural ventilation technology and low temperature hot water floor radiant heating technology were organically integrated in this system, which has the advantages of energy conservation and environment protection, high automation, safe and reliable operation, etc. At the same time, it can make good use of electric power cost between on-peak and off-peak, and promote the optimal allocation of power resources and reduce the cost, which can achieve the goal of intelligent control and energy saving.

  6. THEORETICAL ASPECTS OF BASIC PROVISIONS OF THE ENERGY SAVING MANAGEMENT SYSTEM IN THE FIELD OF HOUSING AND PUBLIC UTILITIES THROUGH INTRODUCTION OF SMALL INNOVATIVE ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Kiseleva Ekaterina Alexandrovna

    2012-10-01

    Full Text Available The author addresses solutions to problems of the housing and utilities sector (including a substantial depreciation of fixed assets of the municipal infrastructure, a gap between domestic utilities management technologies and those employed worldwide, and the fund raising problem through power saving actions to be facilitated by small innovative enterprises. The proposed solutions contribute to formation of new jobs in the regions, reduction of power consumption and higher efficiency of regional economies due to reduced costs and rates (prices set for utilities-related services, and improvement of the standard and quality of living. The principal objective is to develop a set of procedures and criteria to serve as the basis for the selection of tools of power saving innovations in the housing and utilities sector of regions and municipalities. The above actions are to be implemented through the involvement of small innovative enterprises. The basic tools (instruments of the state social and economic (including innovation-related policy, that are to stimulate subjects of innovative activities to implement innovative projects in this sector stimulate energy efficiency innovations in the housing and utilities sector. The proposed set of tools includes tax holidays, subsidies, grants, soft loans, concessional loans, state and municipal orders, etc. The procedure of selection of instruments of state-initiated innovations designated for the improvement of the power efficiency of the housing and public utilities sector to be implemented by regional and municipal authorities is proposed by the author. The author identifies several types of energy saving innovations in the housing and utilities sector, based on their systemic effects. Upon identification of the top-priority recipients of state support, financial resources are to be distributed. Advantages of innovative energy saving projects in the housing and utilities sector, developed and implemented

  7. Development of the Workplace Health Savings Calculator: a practical tool to measure economic impact from reduced absenteeism and staff turnover in workplace health promotion.

    Science.gov (United States)

    Baxter, Siyan; Campbell, Sharon; Sanderson, Kristy; Cazaly, Carl; Venn, Alison; Owen, Carole; Palmer, Andrew J

    2015-09-18

    Workplace health promotion is focussed on improving the health and wellbeing of workers. Although quantifiable effectiveness and economic evidence is variable, workplace health promotion is recognised by both government and business stakeholders as potentially beneficial for worker health and economic advantage. Despite the current debate on whether conclusive positive outcomes exist, governments are investing, and business engagement is necessary for value to be realised. Practical tools are needed to assist decision makers in developing the business case for workplace health promotion programs. Our primary objective was to develop an evidence-based, simple and easy-to-use resource (calculator) for Australian employers interested in workplace health investment figures. Three phases were undertaken to develop the calculator. First, evidence from a literature review located appropriate effectiveness measures. Second, a review of employer-facilitated programs aimed at improving the health and wellbeing of employees was utilised to identify change estimates surrounding these measures, and third, currently available online evaluation tools and models were investigated. We present a simple web-based calculator for use by employers who wish to estimate potential annual savings associated with implementing a successful workplace health promotion program. The calculator uses effectiveness measures (absenteeism and staff turnover rates) and change estimates sourced from 55 case studies to generate the annual savings an employer may potentially gain. Australian wage statistics were used to calculate replacement costs due to staff turnover. The calculator was named the Workplace Health Savings Calculator and adapted and reproduced on the Healthy Workers web portal by the Australian Commonwealth Government Department of Health and Ageing. The Workplace Health Savings Calculator is a simple online business tool that aims to engage employers and to assist participation

  8. Blue Line Innovations brochure : Think green, act smart, save energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Blue Line Innovations Inc. is working with leading electric utilities and regulatory agencies to provide smart-home technologies to consumers for demand-side management. Their latest product is the PowerCost Monitor, a real-time feedback product that help households understand and reduce the amount of electricity they use. The monitor, which reveals electricity use in real-time by both total and current cost and kilowatt hour, uses wireless encrypted technology to send usage information from an outside meter to an in-home display. The small detector/transmitter can be easily installed to an existing household electro-mechanical utility meter by the homeowner without an electrician or service disruption. Studies have shown that when domestic users are provided with real-time feedback on electricity usage, they can reduce their energy bills by as much as 20 per cent. This in-home measuring and reporting unit helps customers make decisions about changing their usage habits, purchasing electricity-saving light and appliances and conserving energy. In a demonstration project, Hydro-One installed PowerCost Monitors in the homes of Hydro One customers in Ontario in July 2004. The objective was to determine the extent of changes in customer behaviour and reductions in electricity consumption resulting from direct real-time feedback information on electricity consumption. Other demonstration projects have been launched in conjunction with CEA Technologies Inc., Natural Resources Canada, Newfoundland Power and BC hydro to install the monitors in homes on both coasts of Canada. Governments, utilities, communities and individuals are recognizing that saving energy is a critical factor to sustainable development by conserving natural resources and reducing pollution. A list of suggestions for reducing electricity use in lighting, kitchens, laundry and heating and cooling were also presented. 1 fig.

  9. Trend of Energy Saving in Electronic Devices for Research and Development

    Directory of Open Access Journals (Sweden)

    Rahmayanti R.

    2016-01-01

    Full Text Available In electronic industry, energy saving is one of the performance indicators of competitiveness beside price, speed, bandwidth and reliability. This affects research and development (R&D activity in mechatronic systems which uses electronic components and electronic systems. A review of trend of electronic devices technology development has been conducted with focus on energy saving. This review includes electronic devices, semiconductor, and nanotechnology. It can be concluded that the trend in electronic devices is mainly dictated by semiconductor technology development. The trend can be concluded as smaller size, lower voltage leading to energy saving, less heat, higher speed, more reliable, and cheaper. In accordance to such technology development, R&D activities in mechatronics especially in Indonesia is being pushed to make proper alignment.Some of such alignment actions are surface mount technology (SMT for installing surface mount devices components (SMD, design layout and SMD troubleshooting tools as well as human resources training and development.

  10. Management of natural resources

    International Nuclear Information System (INIS)

    Danielo, Olivier; Loubens, Audrey

    2016-08-01

    As a sustainable exploitation of fossil natural resources has become an ecological opportunity, this publication proposes a set of articles focused on the cases of gas, oils (conventional or not) and coal. A first article outlines the unavoidable environmental issue associated with the exploitation of fossil energies. The second one comments the meaning of fossil fuel availability, and more particularly the distinction between resources and reserves, and the transformation of resources into reserves for saving purposes. This last issue of transformation of resources into reserves is addressed by next articles which respectively focus on conventional gases and oils, on non conventional gases and oils, and on coal. Two articles then comment perspectives by 2040 by discussing the high tension between fossil resources and geopolitical situation, and by discussing whether a world energy transition is possible. The three last articles notice that the abundance of fossil energies is hiding the potential of renewable energies, discuss whether chemical industry could do without oil, and comment the fact that Russia strengthens its claims on Arctic territories

  11. Nuclear fuel saving assessment of poison-free control in LWRs [light water reactors

    International Nuclear Information System (INIS)

    Abu-Zaied, G.

    1988-01-01

    If neutron losses to control absorbers are to be eliminated, an alternative reactivity control system has to be introduced. Due to improved neutron economy, the fuel utilization of these other alternatives is better than for a conventional poison-controlled PWR [pressurized water reactor]. It is the objective in this work to assess the uranium savings attributable to reactivity control without poison. An investigation into the savings due to the elimination of PWR control by neutron capture has been carried out. The most important finding was that up to a 30% savings in natural uranium can be achieved if fuel to moderator ratio, V f /V m , of SSC [spectral-shift-control] core at EOC [end of cycle] is similar to the standard core V f /V m

  12. The burden of gunshot injuries on orthopaedic healthcare resources ...

    African Journals Online (AJOL)

    2012-12-31

    cost-saving measures, including redirection of financial resources to primary prevention initiatives. S Afr Med J .... various surgical disciplines must share. The longest ..... Treasury Reporting Rates of Exchange as of December 31, 2012. https://.

  13. Exploring the range of energy savings likely from energy efficiency retrofit measures in Ireland's residential sector

    International Nuclear Information System (INIS)

    Dineen, D.; Ó Gallachóir, B.P.

    2017-01-01

    This paper estimates the potential energy savings in the Irish residential sector by 2020 due to the introduction of an ambitious retrofit programme. We estimate the technical energy savings potential of retrofit measures targeting energy efficiency of the space and water heating end uses of the 2011 stock of residential dwellings between 2012 and 2020. We build eight separate scenarios, varying the number of dwellings retrofitted and the depth of retrofit carried out in order to investigate the range of energy savings possible. In 2020 the estimated technical savings potential lies in the range from 1713 GWh to 10,817 GWh, but is more likely to fall within the lower end of this range, i.e. between 1700 and 4360 GWh. When rebound effects are taken into account this reduces further to 1100 GWh and 2800 GWh per annum. The purpose of this paper was to test the robustness of the NEEAP target savings for residential retrofit, i.e. 3000 GWh by 2020. We conclude that this target is technically feasible but very challenging and unlikely to be achieved based on progress to date. It will require a significant shift towards deeper retrofit measures compared to what has been achieved by previous schemes. - Highlights: • Paper estimates range of energy savings likely from Irish residential retrofit. • Achieving NEEAP target savings of 3000 GWh by 2020 is feasible but very challenging. • Likely savings of 1100–2800 GWh per annum in 2020, including rebound. • NEEAP target unlikely to be achieved based on current trends.

  14. REMINDER Saved Leave Scheme (SLS) : Transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2002-01-01

    Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'*) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that, since last year, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2002 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they are still participants in the schem...

  15. Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22 B) can be transferred to the saved leave account at the end of the leave year (30 September). Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the ...

  16. Promoting cooperative federalism through state shared savings.

    Science.gov (United States)

    Weil, Alan

    2013-08-01

    The Affordable Care Act is transforming American federalism and creating strain between the states and the federal government. By expanding the scale of intergovernmental health programs, creating new state requirements, and setting the stage for increased federal fiscal oversight, the act has disturbed an uneasy truce in American federalism. This article outlines a policy proposal designed to harness cooperative federalism, based on the shared state and federal desire to control health care cost growth. The proposal, which borrows features of the Medicare Shared Savings Program, would provide states with an incentive in the form of an increased share of the savings they generate in programs that have federal financial participation, as long as they meet defined performance standards.

  17. Energy saving in refineries and petrochemical complexes

    Energy Technology Data Exchange (ETDEWEB)

    Verde, L

    1975-01-01

    Possible measures applicable in the design of refineries and petrochemical complexes, to effect energy savings were investigated. This was not limited to the single process unit problems, on the contrary the attention is mainly addressed to the identification of the interrelations between different units, emphasizing possible integrations. Particularly, the optimization of the pressure levels and number of the utility networks for steam distribution inside plant facilities, is considered, in order to maximize heat recovery in the process units, and electric power production in the central steampower generation plant. A computer program of general application, based on profitability evaluation at various fuel oil prices and different project configurations, has been developed for these purposes. The general measures applicable within certain limits are then briefly examined. The task of the process engineer is discussed in the perspective of the ''energy saving'' goal.

  18. Potential savings from redetermining disability among children receiving supplemental security income benefits.

    Science.gov (United States)

    Pulcini, Christian D; Kotelchuck, Milton; Kuhlthau, Karen A; Nozzolillo, Alixandra A; Perrin, James M

    2012-01-01

    To compare the costs of redetermining disability to potential savings in Supplemental Security Income payments associated with different strategies for implementing Continuing Disability Reviews (CDRs) among children potentially enrolled in SSI from 2012 to 2021. We reviewed publicly available reports from the Social Security Administration and Government Accountability Office to estimate costs and savings. We considered CDRs for children ages 1-17 years, excluding mandated low-birth weight and age 18 redeterminations that SSA routinely has performed. If in 2012 the Social Security Administration performs the same number of CDRs for children as in 2010 (16,677, 1% of eligibles) at a cessation rate of 15%, the agency would experience net savings of approximately $145 million in benefit payments. If CDR numbers increased to the greatest level ever (183,211, 22% of eligibles, in 1999) at the same cessation rate, the agency would save approximately $1.6 billion in benefit payments. Increasing the numbers of CDRs for children represents a considerable opportunity for savings. Recognizing the dynamic nature of disability, the agency could reassess the persistence of disability systematically; doing so could free up resources from children who are no longer eligible and help the agency better direct its benefits to recipients with ongoing disability and whose families need support to meet the extra costs associated with raising a child with a major disability. Copyright © 2012 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  19. Energy saving in industrial varnishing techniques

    International Nuclear Information System (INIS)

    Kirst, W.

    1978-01-01

    The search for more effective varnishing techniques and better varnish surfaces and the increasing consideration of environmental protection, energy and raw materials conservation have helped to promote electron beam hardening. Also the development of high-solid varnishes have brought about the following improvements: Better quality of the varnish surface, possible saving of one layer in multilayer coatings, reduced emission in the waste air of the spray booth, conservation of valuable raw materials and energy. (orig.) [de

  20. Communication Can Save Lives PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2015-08-04

    This 60 second public service announcement (PSA) is based on the August 2015 CDC Vital Signs report. Antibiotic-resistant germs cause at least 23,000 deaths each year. Learn how public health authorities and health care facilities can work together to save lives.  Created: 8/4/2015 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/4/2015.

  1. Structured packing: an opportunity for energy savings

    International Nuclear Information System (INIS)

    Chavez T, R.H.; Guadarrama G, J.J.

    1996-01-01

    This work emphasizes the advantages about the use of structured packing. This type of packings allows by its geometry to reduce the processing time giving energy savings and throw down the production costs in several industries such as heavy water production plants, petrochemical industry and all industries involved with separation processes. There is a comparative results of energy consumption utilizing the structured vs. Raschig packings. (Author)

  2. Energy Savings Potential of Radiative Cooling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Nicholas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Alvine, Kyle J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-30

    Pacific Northwest National Laboratory (PNNL), with funding from the U.S. Department of Energy’s (DOE’s) Building Technologies Program (BTP), conducted a study to estimate, through simulation, the potential cooling energy savings that could be achieved through novel approaches to capturing free radiative cooling in buildings, particularly photonic ‘selective emittance’ materials. This report documents the results of that study.

  3. When financiers are concerned with energy saving

    International Nuclear Information System (INIS)

    Chauveau, J.

    2005-01-01

    Innovative financial systems allow to finance investments for the energy efficiency improvement of public or residential buildings. Such solutions are implemented in Belgium and Germany. They are based on the association between a financial company, an energy supplier who makes an energy audit and the building owner who refunds the investments with the saving made on the space heating and power consumption of the building. Short paper. (J.S.)

  4. Mapping of Temporal Surface-water Resources Availability and Agricultural Adaptability due to Climate Change and Anthropogenic Activity in a Hot Semi-arid Region of Maharashtra State, India

    Science.gov (United States)

    Roy, A.; Inamdar, A. B.

    2016-12-01

    Major part of Godavari River Basin is intensely drought prone and climate vulnerable in the Western Maharashtra State, India. The economy of the state depends on the agronomic productivity of this region. So, it is necessary to regulate the effects of existing and upcoming hydro-meteorological advances in various strata. This study investigates and maps the surface water resources availability and vegetation, their decadal deviations with multi-temporal LANDSAT images; and finally quantifies the agricultural adaptations. This work involves the utilization of Remote Sensing and GIS with Hydrological modeling. First, climatic trend analysis is carried out with NCEP dataset. Then, multi-temporal LANDSAT images are classified to determine the decadal LULC changes and correlated to the community level hydrological demand. Finally, NDVI, NDWI and SWAT model analysis are accomplished to determine irrigated and non-irrigated cropping area for identifying the agricultural adaptations. The analysis shows that the mean value of annual and monsoon rainfall is significantly decreasing, whereas the mean value of annual and summer temperature is increasing significantly and the winter temperature is decreasing. The analysis of LANDSAT images shows that the surface water availability is highly dependent on climatic conditions. Barren-lands are most dynamic during the study period followed by, vegetation, and water bodies. The spatial extent of barren-lands is increased drastically during the climate vulnerable years replacing the vegetation and surface water bodies. Hence, the barren lands are constantly increasing and the vegetation cover is linearly decreasing, whereas the water extent is changing either way in a random fashion. There appears a positive correlation between surface water and vegetation occurrence; as they are fluctuating in a similar fashion in all the years. The vegetation cover is densely replenished around the dams and natural water bodies which serve as the

  5. Energy saving estimation on radiation process

    International Nuclear Information System (INIS)

    Kaneko, Hideaki; Maekawa, H.; Ito, Y.; Nishikawa, I.; Fujii, H.; Murata, K.

    1982-01-01

    When the quantity of paint used for industrial coating is assumed to be 420,000 tons, it is estimated that the area being coated is 2.8 billion m 2 , the petroleum required for pretreatment steam, drying and baking is 1.68 million tons, and the required amount of energy saving is 120,000 tons per year in terms of petroleum. The authors examined how the adoption of electron beam curing for surface coating contributes to the energy saving. So far, it has been said that electron beam curing is more efficient than thermal or light curing in energy consumption, but the premise condition was not clear. The theoretical energy requirement for thermal curing, light curing and electron beam curing was calculated and compared. The comparison of the measured values was also performed. The amount of energy required for thermal curing, UV light curing and electron beam curing was roughly 100:10:1, and the cost of energy for them was 50:5:1. In spite of the large merit of electron beam curing, it has not spread as expected, because of the repayment cost of the facility and the cost of inert gas required for the process. Energy saving is brought about by electron beam curing, but the overall cost must be examined case by case. (Kako, I.)

  6. About "Save the Children Committee (India)".

    Science.gov (United States)

    1996-01-01

    This article describes the activity among charitable committees to provide education and shelter to orphans and homeless children in India. "Save The Children Committee" of the All India Women's Conference began operations during the Bengal famine of 1943 by providing shelter to children who were homeless or did not know where their parents were. The Bengal Relief Committee also provided shelters, which later became Children's Homes, which were operated by the Save The Children Committee. Funding support for the homes came from individual donors and organizations. The Bengal government provided Rs.25/month/child for 450 children. Children's homes were set up in Phola, Mymensingh, and Brahmanberia, in the present day Bangladesh, and in Bankura. The Committee took over homes in Mahishadal, Khagda, and Belbeni. After 1948, the Children's Homes in East Pakistan were transferred to India. In 1952, several Children's Committees merged. Funds were supplied by international organizations. Government support levels varied over time. Schools for orphans changed from an emphasis on self-reliance and work to ordinary schooling. Brief descriptions are provided for homes at Pifa, Mangalgunge in Bongaon Subdivision, Thakurpukur in 24-Parganas, and Khagda in Midnapore district. For example, the home at Khagda was begun by the Bengal Relief Committee at the time of the famine of 1944. Save The Children Committee took over its operations in 1946. It is now a home for 21 boys. The boys have access to a good high school, have achieved academically, and received respect from the community.

  7. Energy saving potential in existing industrial compressors

    International Nuclear Information System (INIS)

    Vittorini, Diego; Cipollone, Roberto

    2016-01-01

    The Compressed Air Sector accounts for a mean 10% worldwide electricity consumption, which ensures about its importance, when energy saving and CO_2 emissions reduction are in question. Since the compressors alone account for 15% overall industry electricity consumption, it appears vital to pay attention to machine performances. The paper presents an overview of present compressor technology and focuses on saving directions for screw and sliding vanes machines, according to data provided by the Compressed Air and Gas Institute and PNEUROP. Data were processed to obtain consistency with fixed reference pressures and organized as a function of main operating parameters. Each sub-term, contributing to the overall efficiency (adiabatic, volumetric, mechanical, electric, organic), was considered separately: the analysis showed that the thermodynamic improvement during compression achievable by splitting the compression in two stages, with a lower compression ratio, opens the way to significantly reduce the energy specific consumption. - Highlights: • Compressors technology overview in industrial compressed air systems. • Market compressors efficiency baseline definition. • Energy breakdown and evaluation of main efficiency terms. • Assessment of air cooling-related energy saving potential. • Energy specific consumption reduction through dual stage compression.

  8. Vision 20/20 : saving for the future Alberta advantage

    International Nuclear Information System (INIS)

    Milke, M.

    2006-03-01

    As part of the Alberta Vision 20/20 project, Alberta's past and present spending patterns on natural resources and choices for the future were examined. Trust funds in Alberta, Alaska, and Norway were also compared, in order to learn from other jurisdictions. This report presented findings from Phase 3 of Vision 2020. The objectives of the study were to provide insight on what Alberta's economic, social and policy landscape might look like in the coming decades given expected demographic changes; benchmark Alberta's performance on key economic and social indicators and analyze government performance in related policy areas; supply useful, accessible information and possible solutions to Albertans about some of the challenges that demographic change is likely to bring; encourage discussion of issues among Albertans, including legislators and the media; and, where appropriate, encourage actions to mitigate or alleviate foreseeable problems. The guiding principles of the Vision 20/20 were first presented. Alberta's fiscal context and labyrinth of savings funds were examined. A detailed explanation and literature review of resource trust funds in Norway, Alaska, and Alberta were then provided followed by a comparison of the Alberta, Alaska, and Norway funds. Last, the report presented Alberta's options and discussion as well as recommendations. It was recommended that Alberta's annual per capita spending should not exceed population growth and inflation; the province should consider transfers of additional resource revenue into the Heritage Fund in the manner of the state of Alaska; and the province should deposit between 30 per cent and 40 per cent of all nonrenewable resource revenues in the Heritage Fund annually. 38 refs., 4 tabs., 17 figs., 4 appendices

  9. On Resource Description Capabilities of On-Board Tools for Resource Management in Cloud Networking and NFV Infrastructures

    OpenAIRE

    Tutschku, Kurt; Ahmadi Mehri, Vida; Carlsson, Anders; Chivukula, Krishna Varaynya; Johan, Christenson

    2016-01-01

    The rapid adoption of networks that are based on "cloudification" and Network Function Virtualisation (NFV) comes from the anticipated high cost savings of up to 70% in their build and operation. The high savings are founded in the use of general standard servers, instead of single-purpose hardware, and by efficiency resource sharing through virtualisation concepts. In this paper, we discuss the capabilities of resource description of "on-board" tools, i.e. using standard Linux commands, to e...

  10. Mobile recommender application for promoting electricity saving among Iraqis

    Science.gov (United States)

    Sabri, Manhal Isam; Hussain, Azham

    2017-10-01

    Mobile utilization has rapidly expanded due to its feasibility in executing different applications that can be used in solving everyday problems. Common issues in daily life include electricity saving. In Iraq, the Ministry of Power seriously faces such issue. This is because most households have lack access to information regarding to sufficient power consumption, as well as applications that educate about such saving. Therefore, this study aims at developing a mobile application for Iraqi to help them understand the basis for reducing electricity consumption based on the meter data supplied by the users for square meter along with the active devices and period of usage. The proposed mobile application was evaluated by 50 households from the perspective of ease of use, usefulness, ease of learning, and satisfaction. The obtained result showed that majority of the participants found the application to be ease to use, useful, easy to learn, and were satisfied with its functionalities. The study findings provide some insights about the importance of using mobile application for promoting households in Iraq to manage their power consumption behavior.

  11. America Saves! Energizing Main Street's Small Businesses

    Energy Technology Data Exchange (ETDEWEB)

    Lindberg, James [National Trust for Historic Preservation, Washington, DC (United States)

    2016-09-30

    The America Saves! Energizing Main Street Small Businesses project engaged the 1,200-member National Main Street Center (NMSC) network of downtown organizations and other local, regional, and national partners to test a methodology for sharing customized energy efficiency information with owners of commercial buildings smaller than 50,000 square feet. Led by the National Trust for Historic Preservation’s Preservation Green Lab, the project marshalled local staff and volunteers to gather voluntarily-disclosed energy use information from participating businesses. This information was analyzed using a remote auditing tool (validated by the National Renewable Energy Lab) to assess energy savings opportunities and design retrofit strategies targeting seven building types (food service and sales, attached mixed-use, strip mall, retail, office, lodging, and schools). The original project design contemplated extensive leveraging of the Green Button protocol for sharing annualized utility data at a district scale. Due the lack of adoption of Green Button, the project partners developed customized approaches to data collection in each of twelve pilot communities. The project team encountered considerable challenges in gathering standardized annual utility data from local partners. After overcoming these issues, the data was uploaded to a data storehouse. Over 450 properties were benchmarked and the remote auditing tool was tested using full building profiles and utility records for more than 100 commercial properties in three of the pilot communities. The audit tool demonstrated potential for quickly capturing, analyzing, and communicating energy efficiency opportunities in small commercial buildings. However, the project team found that the unique physical characteristics and use patterns (partial vacancy, periodic intensive uses) of small commercial buildings required more trouble-shooting and data correction than was anticipated. In addition, the project revealed that

  12. The modern water-saving agricultural technology: Progress and focus

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... saving agricultural technology, which include modern biological water-saving technology, unconventional ... and innovation, water, nutrient migration theory, regula- .... urban sewage of more than 50%; Mexico City, 90% of.

  13. INFORMATION TECHNOLOGIES IN MANAGEMENT OF ENERGY SAVING PROJECTS

    Directory of Open Access Journals (Sweden)

    Дмитро Валерійович МАРГАСОВ

    2015-06-01

    Full Text Available The information technology structure is considered of energy saving projects. The project management diagram of energy saving projects is developed, using GIS, ICS, BIM and other control and visual systems.

  14. Dynamic analysis of savings and economic growth in Nigeria ...

    African Journals Online (AJOL)

    Dynamic analysis of savings and economic growth in Nigeria. ... a trivariate dynamic Granger causality model with savings, economic growth and foreign ... It is recommended that in the short run, policies in Nigeria should be geared towards ...

  15. Energy saving and consumption reducing evaluation of thermal power plant

    Science.gov (United States)

    Tan, Xiu; Han, Miaomiao

    2018-03-01

    At present, energy saving and consumption reduction require energy saving and consumption reduction measures for thermal power plant, establishing an evaluation system for energy conservation and consumption reduction is instructive for the whole energy saving work of thermal power plant. By analysing the existing evaluation system of energy conservation and consumption reduction, this paper points out that in addition to the technical indicators of power plant, market activities should also be introduced in the evaluation of energy saving and consumption reduction in power plant. Ttherefore, a new evaluation index of energy saving and consumption reduction is set up and the example power plant is calculated in this paper. Rresults show that after introducing the new evaluation index of energy saving and consumption reduction, the energy saving effect of the power plant can be judged more comprehensively, so as to better guide the work of energy saving and consumption reduction in power plant.

  16. Cost-saving production technologies and partial ownership

    OpenAIRE

    Juan Carlos Barcena-Ruiz; Norma Olaizola

    2007-01-01

    This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

  17. Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

    International Nuclear Information System (INIS)

    Ding, Yi; Yang, Hongliang

    2013-01-01

    Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation scheduling models in China. The institutional and technical barriers impeding the implementation of energy-saving generation dispatching model are identified. The development of advanced energy-saving generation scheduling models towards competitive market models and phased planning programs are emphasized in this paper. The effectiveness and experience of provinces piloted energy-saving generation dispatching projects are also discussed. - Highlights: ► Introducing problems of current power generation scheduling model in China. ► Discussing necessity of implementing ESGD model and corresponding barriers. ► Proposing phased planning programs for developing ESGD models. ► Discussing the effectiveness and experience of provinces piloted ESGD projects

  18. Financial development and domestic savings in emerging Asian countries

    OpenAIRE

    Yılmaz BAYAR

    2014-01-01

    Saving is one of the important determinants of economic growth. Therefore determinants of saving are indirectly important for a sustainable economic growth. Financial sector has come into prominence as a possible determinant of saving in the globalized financial markets. This study examines the relationship between gross domestic savings and financial development in the emerging Asian countries during the period 1992-2011 by using panel regression. We found that financial de...

  19. El malestar por inestabilidad laboral y su relación con tensión y recursos personales Uneasiness due to Job instability and its relationship With psychological strain and personnal resources

    Directory of Open Access Journals (Sweden)

    N. Leibovich de Figueroa

    2007-12-01

    Full Text Available La inestabilidad laboral se ha tornado uno de los estresores psicosociales más relevantes en las últimas décadas y su percepción podría generar malestar y sufrimiento, desembocando en un estado de estrés con la consecuente elevación de tensión en uno o varios de sus canales de expresión, provocando así efectos deletéreos en la salud psico-física de los trabajadores. Nos preguntamos qué aspectos personales y laborales de los trabajadores estarían vinculados a un mayor malestar debido a la inestabilidad laboral y si éste es predictor de la tensión psicológica que manifiesta el trabajador. El IMPIL, en su versión reducida, junto con otras técnicas, fue administrado a una muestra de 90 empleados en relación de dependencia. Concluimos que la inestabilidad laboral impacta negativamente en el trabajador a través de uno de los canales de expresión: el malestar, sobre todo si existe un desajuste entre el nivel de instrucción y la tarea que realiza. A su vez, corroboramos que la inestabilidad laboral y el malestar que la misma genera producen altos niveles de tensión psicológica en el trabajador.In the last decades job instability has become one of the most important psychosocial stressors and its perception could generate uneasiness and suffering, leading to a stressful state with a consequent increase of strain through one or several of its channels of expression, producing deleterious effects in the psychophysical health of workers. We wonder which workers' personal and job features could be related to a greater uneasiness due to job instability and if this job instability is a predictor of the psychological strain expressed by them. The IMPIL, in its reduced version, and other techniques were administered to a sample of 90 salaried employees. We conclude that job instability has a negative impact on the worker through one of the channels of expression: uneasiness, most of all if there exists a maladjustement between the

  20. Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

    DEFF Research Database (Denmark)

    Ding, Yi; Yang, Hongliang

    2013-01-01

    Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From...... 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy......-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation...

  1. Heat savings in buildings in a 100% renewable heat and power system in Denmark with different shares of district heating

    DEFF Research Database (Denmark)

    Zvingilaite, Erika; Balyk, Olexandr

    2014-01-01

    levels of heat savings, which can be implemented by reducing heat transmission losses through building elements and by installing ventilation systems with heat recovery, in different future Danish heat and power system scenarios. Today almost 50% of heat demand in Denmark is covered by district heating......The paper examines implementation of heat saving measures in buildings in 2050, under the assumption that heat and power supply comes solely from renewable resources in Denmark.Balmorel – a linear optimisation model of heat and power sectors in Denmark is used for investigating economically viable....... A further expansion of district heating network in Denmark is assessed and penetration of heat savings is analysed in this context.If all heat saving measures, included in the model, are implemented, heat demand in Danish buildings in 2050 could be reduced by around 40%. Results show that it is cost...

  2. Alleviating Pressure on Water Resources: A new approach could be attempted

    Science.gov (United States)

    Sun, Shikun; Wang, Yubao; Wang, Feifei; Liu, Jing; Luan, Xiaobo; Li, Xiaolei; Zhou, Tianwa; Wu, Pute

    2015-09-01

    Water and food safety are two major challenges which the world faces today. Traditional water management focuses on the reduction of water use through improvements in water saving technologies. However, quantitative research is needed to evaluate the effects of changing food consumption patterns on water resources. Here we report the water saving effects of changing diet pattern of the major crops and animal products in mainland China. By using the concepts of water footprint (WF) per weight unit and per calorie unit, provided by 13 primary crop and animal products, the WFs of the 13 agricultural products in each province are compared, and their water/energy conversion efficiencies are analyzed. Then, impacts of different scenarios of changing diet pattern on water consumption were explored. Results show that there are obvious differences between the WF per weight and calorie unit provided by crop and animal products due to the nutritional properties of the agricultural products. Promoting water savings from the food consumption side could give a positive feedback on water consumption. Scenario analysis of adjustments to the diet pattern proves that it is potentially feasible to reach the objective of alleviating stress on water resources while guaranteeing nutritional value of the residents.

  3. Potential energy savings in renovation projects of residential and service buildings; Energiansaeaestoemahdollisuudet rakennuskannan korjaustoiminnassa

    Energy Technology Data Exchange (ETDEWEB)

    Heljo, J.; Vihola, J.

    2012-11-01

    The study estimates the feasible energy savings potential in the 2010 building stock by 2050. The focus is on energy-saving measures related to renovation of residential and service buildings. The calculations were done by building types and age groups using the EKOREM calculation model. The calculations indicate the building types and structural elements where potential for savings exists. The study did not consider energy-saving measures related to changes in heating systems, electrical equipment, property maintenance or use habits. The study disproved the common belief that considerably more energy savings could be achieved faster by focussing on the existing building stock instead of new construction. That is mainly due the fact that it generally pays to implement structural energy-saving measures only when the targeted elements also require other significant repairs besides energy-efficiency improvements. Thus, energy renovations cannot be speeded up very much. The clearest exception are the extra insulations added to roof assemblies that are easy to implement. Attempts to save more energy in the building stock than can be achieved at a small additional cost in connection with needed renovations may multiply costs, and the saving in energy costs will not necessarily cover the additional investments. The efficiency of energy-saving measures can be affected by recommending or ordering use of more energy efficient windows, thicker extra insulations or more efficient ventilation heat recovery systems than the standard solution selected in connection with renovations. The goal of preserving the characteristics of buildings of cultural-historical or architectural value and the typical solutions and materials used in all buildings of a certain period limit the repair and renovation of structural elements. In the case of these buildings, improvement of energy efficiency can be considered in connection with the planning of renovations and the buildings' use and

  4. Entrepreneurial Saving Practices and Reinvestment : Theory and Evidence

    NARCIS (Netherlands)

    Beck, T.H.L.; Pamuk, H.; Uras, R.B.

    2014-01-01

    We use a novel enterprise survey from Tanzania to gauge the relationship between saving instruments and entrepreneurial reinvestment. While most informal savings practices do not imply a lower likelihood of entrepreneurial reinvestment when compared with formal savings practices, we find a

  5. Saving in Childhood and Adolescence: Insights from Developmental Psychology

    Science.gov (United States)

    Otto, Annette

    2013-01-01

    This paper addresses variables related to child and adolescent saving and explains the development of skills and behaviors that facilitate saving from an economic socialization perspective. References are made to the differences between the economic world of children, adolescents, and adults as well as to existing theories of saving. Children's…

  6. Saving and Habit Formation : Evidence from Dutch Panel Data

    NARCIS (Netherlands)

    Alessie, R.J.M.; Teppa, F.

    2002-01-01

    This paper focuses on the role of habit formation in individual preferences over consumption and saving.We closely relate to Alessie and Lusardi's (1997) model as we estimate a model which is based on their closed-form solution, where saving is expressed as a function of lagged saving and other

  7. Causal Links among Saving, Investment and Growth and ...

    African Journals Online (AJOL)

    The relationship between saving, investment and GDP still remains an empirical issue. In their aspiration to catch up the rest of the world, developing countries provides a special place on this matter. This paper tried to investigate the main determinants of saving and the connection among saving, investment and GDP in the ...

  8. Entrepreneurial saving practices and reinvestment : Theory and evidence

    NARCIS (Netherlands)

    Beck, T.H.L.; Pamuk, Haki; Uras, Burak

    2017-01-01

    We use a novel enterprise survey to gauge the relationship between saving instruments and entrepreneurial reinvestment. We show that while most informal saving practices are not associated with a lower likelihood of reinvestment when compared with formal saving practices, there is a significantly

  9. 48 CFR 48.104-3 - Sharing collateral savings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Sharing collateral savings... CONTRACT MANAGEMENT VALUE ENGINEERING Policies and Procedures 48.104-3 Sharing collateral savings. (a) The Government shares collateral savings with the contractor, unless the head of the contracting activity has...

  10. 48 CFR 2448.104-3 - Sharing collateral savings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Sharing collateral savings... DEVELOPMENT CONTRACT MANAGEMENT VALUE ENGINEERING 2448.104-3 Sharing collateral savings. (a) The authority of the HCA to determine that the cost of calculating and tracking collateral savings will exceed the...

  11. The modern water-saving agricultural technology: Progress and focus

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... DEVELOPING TENDENCY OF MODERN WATER-. SAVING AGRICULTURAL TECHNOLOGY. Excavation of the own water-saving potential using biotechnology. The biological water-saving technology that uses crop physiology control and modern breeding techniques to increase production and water ...

  12. 76 FR 35085 - Savings and Loan Holding Company Application

    Science.gov (United States)

    2011-06-15

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Savings and Loan Holding Company... Proposal: Savings Loan Holding Company Application. OMB Number: 1550-0015. Form Numbers: H-(e). Description... that no company, or any director or officer of a savings and loan holding company, or any individual...

  13. 76 FR 20459 - Savings and Loan Holding Company Application

    Science.gov (United States)

    2011-04-12

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Savings and Loan Holding Company... concerning the following information collection. Title of Proposal: Savings and Loan Holding Company... officer of a savings and loan holding company, or any individual who owns, controls, or holds with power...

  14. The EU must triple its energy saving policy effect

    NARCIS (Netherlands)

    Wesselink, B.; Eichhammer, W.; Harmsen, R.

    2010-01-01

    The impact of EU energy savings policy must triple to achieve the bloc’s 2020 energy savings goal. But such efforts could get a much better foundation if European leaders set a binding energy consumption target, rather than the current indicative savings target. The evidence for such

  15. Building Savings and Investments Culture among Nigerians | Imegi ...

    African Journals Online (AJOL)

    It is therefore necessary to build among Nigerians savings and investments culture. A review of extant literature revealed that people save and invest for several reasons among which are to enhance the standard of living, take advantage of rare business opportunities, and meet unforeseen circumstances. Savings can be ...

  16. A Review of Green Building Development in China from the Perspective of Energy Saving

    OpenAIRE

    Ying Zhang; Jian Kang; Hong Jin

    2018-01-01

    This paper reviews the history of green building development and assessment standards in China, particularly from the perspective of energy saving. It is divided into four parts: (1) the development of policies of green building in China that have been proposed for meeting energy-conservation and emission-reduction targets; (2) the scientific research on green building by the Chinese government, including the promotion of maximum resource sustainability, environmental protection, and the redu...

  17. The Global Trend of Energy Saving and Carbon Reducing in Post-Kyoto Protocol Era

    OpenAIRE

    Chih-Lun Chen

    2011-01-01

    In recent years, with increased focus on extreme global climates, the drastic population growth, and the exhaustion of resources, humanity has a greater need for and reliance on intelligent, technology-enhanced living, as well as more effective means of production. Being sustainable, green, and environmentally friendly is becoming more and more a global priority. Energy saving and carbon reduction are the keys to achieving intelligent living, clean production, and environmental responsibility...

  18. 40% Whole-House Energy Savings in the Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This guide book is a resource to help builders design and construct highly energy-efficient homes, while addressing building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-humid climate can build homes that achieve whole house energy savings of 40% over the Building America benchmark (the 1993 Model Energy Code) with no added overall costs for consumers.

  19. 40% Whole-House Energy Savings in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gilbride, T. L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hefty, M. G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cole, P. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Adams, K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Butner, R. S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ortiz, S. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Love, Pat M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2011-09-01

    This guide book is a resource to help builders design and construct highly energy-efficient homes, while addressing building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the mixed-humid climate can build homes that achieve whole house energy savings of 40% over the Building America benchmark (the 1993 Model Energy Code) with no added overall costs for consumers.

  20. The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

    Energy Technology Data Exchange (ETDEWEB)

    Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

    2014-03-19

    End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new

  1. The potential and need for energy saving in standard family detached and semi-detached wooden houses in arctic Greenland

    DEFF Research Database (Denmark)

    Bjarløv, Søren Peter; Vladyková, Petra

    2011-01-01

    The paper gives an account of the potential and need for energy saving in standard family detached and semi-detached wooden houses in Greenland. It is based on studies of house construction compared with Building Regulation requirements and the spread of buildings over time. In the climatic...... conditions of Greenland, there is considerable potential for energy saving in houses due to their construction, shape and condition. To estimate the total potential for energy saving and thus reducing CO2 emissions, we carried out a detailed investigation of three typical standard semi-detached family houses...

  2. Impact of promotion children’s savings

    Directory of Open Access Journals (Sweden)

    Damir Ribić

    2008-07-01

    Full Text Available Promotion activities directed at specific target groups can vary according to their type and intensity. In modern banking, where competition is very strong, it is the task of marketing experts to decide which activities to push in a specific situation depending on bank interests and financial resources available. Bank marketing in current circumstances is gaining another dimension, not only because the clients who use banking services are becoming more educated and sophisticated but also due to new legislation, intended to protect their best interests. High competition creates strong pressures on the market so banks and marketing experts must be able to produce untraditional and innovative solutions in response to a greater challenge. Through banking history, insufficient attention was paid to children entirely for the reasons of very low profitability in this segment. This area was poorly explored so there are very few researches of the activities aimed at promoting the banking products created especially for children. This paper includes a review of the researches available to the author that focus on the marketing activities directed at children through the historical development of the banking sector. By using case study methods, it describes the way in which two promotional campaigns were planned, and analyzes the course of their performance. The chosen campaigns show similarities in some elements but also certain differences that indicate the complexity of the problem of their approach, along with the need to apply greater creativity. The key elements for the (lack of success in the campaigns with children as the target groups are identified as well as what needs to be done in order to maintain the banking market share and reinforce the bank’s image.

  3. Compressive behavior of energy-saving fired facing brick composite wall

    Science.gov (United States)

    Guo, Kai; Wu, Cai

    2018-03-01

    The energy-saving fired facing brick composite wall has a broad development prospects due to its merits of thermal insulation, energy conservation, beautiful, and natural. The construction and characteristics of this wall are introduced and analyzed in this paper. Experimental studies of samples are also conducted to investigate its compressive performance. The results show that the energy-saving fired facing brick composite wall has high compressive capacity. It has considerable application prospect, the study in this paper provides foundation to further studies.

  4. Energy savings certificates 2011-2013 - Companies. Knowledge for action

    International Nuclear Information System (INIS)

    2013-03-01

    As fossil energy resources are depleted and the environmental impacts of their use are increasingly addressed, energy costs will continue to rise. In this context it is vital for businesses - in the service sector, industry or agriculture - to take steps now to start managing their energy consumption. A number of tools and mechanisms are currently being implemented to help companies in this process, at the national and European levels. Among these, Energy Savings Certificates (ESCs) were introduced in France by the Energy Policy Law of 13 July 2005, with the aim of achieving energy savings in sectors of dispersed activity, mainly buildings, but also light industry, agriculture and transport. For businesses this mechanism is an additional financial leverage tool that can be used to support their energy management projects. Under this scheme energy suppliers must promote energy-efficient investments, and thus are potential sources of financing for project owners. The Grenelle environmental conference forcefully reiterated the need to take action, in particular to renovate existing building stock. In order to achieve the ambitious goals that have been set, the financial mechanisms put into place, including the ESC scheme, must be amplified. Following the first conclusive test period (2006-2009), the ESC scheme is being ramped up during a second and more ambitious three-year period that began on 1 January 2011. The present document is intended to inform companies of changes in the ESC scheme to be implemented for the second period covering 2011-2013. This guidance is divided into two parts: the first section describes the principles of the ESC scheme, and the second offers advice to companies that want to use this scheme for an energy management project. You will also find a practical information sheet listing all the steps to be taken to submit an ESC claim

  5. Saving Money and Time with Virtual Server

    CERN Document Server

    Sanders, Chris

    2006-01-01

    Microsoft Virtual Server 2005 consistently proves to be worth its weight in gold, with new implementations thought up every day. With this product now a free download from Microsoft, scores of new users are able to experience what the power of virtualization can do for their networks. This guide is aimed at network administrators who are interested in ways that Virtual Server 2005 can be implemented in their organizations in order to save money and increase network productivity. It contains information on setting up a virtual network, virtual consolidation, virtual security, virtual honeypo

  6. Future cost savings from engineering innovations

    International Nuclear Information System (INIS)

    Roemer, R.E.; Foster, D.C.; Jacobs, S.B.

    1987-01-01

    Nuclear power plant design and operating experience in the 1970s and 1980s continues to provide feedback to the technology base. The lessons learned in these two decades, coupled with engineering innovation, will lead to improvements and cost-reductions in the plants of the 1990s. Two types of innovations related to piping are described: snubber reduction and pipe rupture elimination. A brief account of the industry experience is given for each, followed by an account of the technical methodology involved. A discussion of expected benefits, including cost savings of millions of dollars (U.S.), is provided. (author)

  7. Food industry hungry for energy savings

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, D

    1989-04-01

    The United Kingdom food and drink industry is a significant user of energy. Energy use figures are given showing the breakdown in terms of different sectors of the industry and also in terms of the fuel used. Four energy monitoring and target setting demonstration projects are outlined at factories typical of their type in different sectors. The projects have resulted in a much greater awareness by management in the factories involved of energy consumption and waste. Examples are given of improved energy efficiency and consequent energy savings which have resulted from this awareness. (U.K.).

  8. The energy saving manual; Das Energiesparbuch

    Energy Technology Data Exchange (ETDEWEB)

    Goetze, Monika; Pinn, Gudrun

    2009-07-01

    The constant increase in the cost of electric power, petroleum, gasoline and gas burden the household budget. At the same time, greenhouse gases are speeding up global warming alarmingly. It is time to reconsider our style of living. This guide presents simple and practical hints to reduce energy costs and protect the climate. Exemplary calculations show how up to 1100 Euro can be saved per household member and per annum. Subjects: Identifying fields of excess energy consumption; No wasting of electricity, heat, and warm water; Food, shopping and climate; Mobility and climate protection; How to establish an individual energy conservation profile. (orig.)

  9. Saving Money or Spending Tomorrow's Money

    Institute of Scientific and Technical Information of China (English)

    罗芳梅

    2017-01-01

    Chinese are normally believed to be thrifty.However,economic development has had a tremendous impact upon Chinese society,uprooting the long-engraved ideas.With the emergence of the credit cards,spending tomorrow's money becomes a reality.In this way,people are in dilemma:saving money or spending tomorrow's money.Firstly,this paper focuses on the benefits of spending tomorrow's money.Secondly,it shows that spending tomorrow's money is confronted with many challenges.Finally,the paper comes up with some suggestions to solve these problems.

  10. Does extending daylight saving time save energy? Evidence from an Australian experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kellogg, R. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics; Wolff, H. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics]|[Forschungsinstitut zur Zukunft der Arbeit (IZA), Bonn (Germany)

    2007-03-15

    Several countries are considering extending Daylight Saving Time (DST) in order to conserve energy, and the U.S. will extend DST by one month beginning in 2007. However, projections that these extensions will reduce electricity consumption rely on extrapolations and simulations rather than empirical evidence. This paper, in contrast, examines a quasiexperiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. Using detailed panel data and a triple differences specification, we show that the extension did not conserve electricity, and that a prominent simulation model overstates electricity savings when it is applied to Australia. (orig.)

  11. Environmental benefit analysis of strategies for potable water savings in residential buildings.

    Science.gov (United States)

    Marinoski, Ana Kelly; Rupp, Ricardo Forgiarini; Ghisi, Enedir

    2018-01-15

    The objective of this study is to assess the environmental benefit of using rainwater, greywater, water-efficient appliances and their combinations in low-income houses. The study was conducted surveying twenty households located in southern Brazil, which resulted in water end-uses estimation. Then, embodied energy, potential for potable water savings and sewage reduction when using the different strategies were estimated. The environmental benefit analysis of these strategies was performed using an indicator that includes embodied energy, potable water savings, reduction of sewage and energy consumption in the water utility, and sewage production during the life cycle of the system. The results indicated that the strategy with the greatest environmental benefit is the use of water-efficient appliances, which resulted in substantial water savings and reduction of sewage, causing low environmental impact due to lower embodied energy over the life cycle. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Energy Savings in Cellular Networks Based on Space-Time Structure of Traffic Loads

    Science.gov (United States)

    Sun, Jingbo; Wang, Yue; Yuan, Jian; Shan, Xiuming

    Since most of energy consumed by the telecommunication infrastructure is due to the Base Transceiver Station (BTS), switching off BTSs when traffic load is low has been recognized as an effective way of saving energy. In this letter, an energy saving scheme is proposed to minimize the number of active BTSs based on the space-time structure of traffic loads as determined by principal component analysis. Compared to existing methods, our approach models traffic loads more accurately, and has a much smaller input size. As it is implemented in an off-line manner, our scheme also avoids excessive communications and computing overheads. Simulation results show that the proposed method has a comparable performance in energy savings.

  13. Cost-Value Analysis and the SAVE: A Work in Progress, But an Option for Localised Decision Making?

    Science.gov (United States)

    Karnon, Jonathan; Partington, Andrew

    2015-12-01

    Cost-value analysis aims to address the limitations of the quality-adjusted life-year (QALY) by incorporating the strength of public concerns for fairness in the allocation of scarce health care resources. To date, the measurement of value has focused on equity weights to reflect societal preferences for the allocation of QALY gains. Another approach is to use a non-QALY-based measure of value, such as an outcome 'equivalent to saving the life of a young person' (a SAVE). This paper assesses the feasibility and validity of using the SAVE as a measure of value for the economic evaluation of health care technologies. A web-based person trade-off (PTO) survey was designed and implemented to estimate equivalent SAVEs for outcome events associated with the progression and treatment of early-stage breast cancer. The estimated equivalent SAVEs were applied to the outputs of an existing decision analytic model for early breast cancer. The web-based PTO survey was undertaken by 1094 respondents. Validation tests showed that 68 % of eligible responses revealed consistent ordering of responses and 32 % displayed ordinal transitivity, while 37 % of respondents showing consistency and ordinal transitivity approached cardinal transitivity. Using consistent and ordinally transitive responses, the mean incremental cost per SAVE gained was £ 3.72 million. Further research is required to improve the validity of the SAVE, which may include a simpler web-based survey format or a face-to-face format to facilitate more informed responses. A validated method for estimating equivalent SAVEs is unlikely to replace the QALY as the globally preferred measure of outcome, but the SAVE may provide a useful alternative for localized decision makers with relatively small, constrained budgets-for example, in programme budgeting and marginal analysis.

  14. Estimating the energy saving potential of telecom operators in China

    International Nuclear Information System (INIS)

    Yang, Tian-Jian; Zhang, Yue-Jun; Huang, Jin; Peng, Ruo-Hong

    2013-01-01

    A set of models are employed to estimate the potential of total energy saved of productions and segmented energy saving for telecom operators in China. During the estimation, the total energy saving is divided into that by technology and management, which are derived from technical reform and progress, and management control measures and even marketing respectively, and the estimating methodologies for energy saving potential of each segment are elaborated. Empirical results from China Mobile indicate that, first, the technical advance in communications technology accounts for the largest proportion (70%–80%) of the total energy saved of productions in telecom sector of China. Second, technical reform brings about 20%–30% of the total energy saving. Third, the proportions of energy saving brought by marketing and control measures appear relatively smaller, just less than 3%. Therefore, China's telecom operators should seize the opportunity of the revolution of communications network techniques in recent years to create an advanced network with lower energy consumption

  15. Savings and Loans Program, The Revenue of Small Micro Enterprises and Poverty Reduction among Women Groups

    Directory of Open Access Journals (Sweden)

    Ana Zahrotun Nihayah

    2017-04-01

    Full Text Available This research aims to understand the micro small medium business income both before and after receiving the program, to find out the number of poverty reduction, and to see the application of Islamic economic values on the women’s saving and loans program.The population of this research are members of the women’s saving and loans program, which is 215 people in total and scattered in 16 business group. Using random sampling techniques, there are 70 people that was taken into consideration. The method analysis used in in this research is using Wilcoxon rank test analysis, the poverty reduction analysis, and the Islamic economics values. Based on data analysis is(1 founded that the women’s saving and loans program affecting the micro small medium enterprises income. (2 Due to the women’s saving and loans program there are decreasing number of poverty rate about 20 percent. (3 It is realized that there are some applications of Islamic economics values upon the women’s saving and loans program, they are time extensions, fine replacement, social activities, and the improvement of society welfare.

  16. Time-saving innovations, time allocation, and energy use. Evidence from Canadian households

    Energy Technology Data Exchange (ETDEWEB)

    Brencic, Vera; Young, Denise [University of Alberta, 8-14 HM Tory, Edmonton, AB (Canada)

    2009-09-15

    Time and energy are major inputs into the production of household goods and services. As a result, the market penetration of time-saving technologies for general household use is expected to affect both a household's (1) allocation of time across home production and leisure activities; and (2) energy use. For example, with a household's adoption of a microwave or a dishwasher, cooking food and washing dishes will require less time, and therefore in-home meal preparation may increase. Households with microwaves or dishwashers may also opt to spend more time undertaking other production activities, inside or outside the home, or engage in more leisure (watching TV, reading, exercising). To the extent that time is reallocated from less to more energy-intensive activities in the home, residential energy use will increase as households adopt appliances that embody time-saving technology. Furthermore, an adoption of time-saving technologies for basic household chores, such as meal preparation and laundry, can impact energy use due to the fact that many time-saving technologies are more energy intensive than alternative technologies that require larger time commitments. In this paper, we use the Canadian Survey of Household Energy Use data from 2003 to examine the extent to which ownership of products that embody time-saving innovations affects time allocation and energy use at the household level. (author)

  17. You owe it to yourself: boosting retirement saving with a responsibility-based appeal.

    Science.gov (United States)

    Bryan, Christopher J; Hershfield, Hal E

    2012-08-01

    Americans are not saving enough for retirement. Previous research suggests that this is due, in part, to people's tendency to think of the future self as more like another person than like the present self, making saving feel like giving money away rather than like investing in oneself. Using objective employer saving data, a field experiment capitalized on this phenomenon to increase saving. It compared the effectiveness of a novel message--one appealing to people's sense of "social" responsibility to their future selves--with a more traditional appeal to people's sense of rational self-interest. The social-responsibility-to-the-future-self message resulted in larger increases in saving than the self-interest message, but only to the extent that people felt a strong "social" connection to their future selves. These results broaden our understanding of the psychology of moral responsibility and refine our understanding of the role of future-self continuity in fostering intertemporal patience. They further demonstrate how understanding conceptions of the self over time can suggest solutions to important and challenging policy problems. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

  18. Model projections and policy reviews for energy saving in China's service sector

    International Nuclear Information System (INIS)

    Zhang, Lin

    2013-01-01

    Energy efficiency of buildings in the service sector is becoming increasingly important in China due to the structural shift of the economy from industry to services. This paper employs a bottom-up cohort model to simulate current energy saving policies and to make projections for future energy use and CO 2 emissions for the period 2000–2030 in the Chinese service sector. The analysis shows that energy demand in the service sector will approximately triple in 2030, far beyond the target of quadrupling GDP while only doubling energy use. However, it is feasible to achieve the target of emission reduction by 40% in 2020 even under the poor state of compliance rate of building standard. This paper also highlights four crucial aspects of designing optimal energy saving policies for China's service sector based on the model results. - Highlights: • Government energy saving target cannot realize with current policies in services. • Energy savings policies for new buildings are crucial than building retrofitting. • Cooling energy use increases significantly to reach equal weight as heating. • CO 2 tax can contribute to change in fuel mix, and thus emission reductions. • Low compliance rate limits further energy saving, hence green fund is required

  19. Electric power production contra electricity savings

    International Nuclear Information System (INIS)

    Schleisner, L.; Grohnheit, P.E.; Soerensen, H.

    1991-01-01

    The expansion of electricity-producing plants has, in Denmark until now, taken place in accordance with the demand for electricity. Recently, it has been suggested that the cost of the further development of such systems is greater than the cost of instigating and carrying out energy conservation efforts. The aim of the project was to evaluate the consequences for power producing plants of a reduction of the electricity consumption of end-users. A method for the analysis of the costs involved in the system and operation of power plants contra the costs that are involved in saving electricity is presented. In developing a model of this kind, consideration is given to the interplay of the individual saving project and the existing or future electricity supply. Thus it can be evaluated to what extent it would be advisable to substitute investments in the development of the capacity of the power plants with investments in the reduction of electricity consumption by the end users. This model is described in considerable detail. It will be tested in representative situations and locations throughout the Nordic countries. (AB) 17 refs

  20. Energy saving screw compressor technology; Energiebesparende schroefcompressortechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, A. [RefComp, Lonigo (Italy); Neus, M. [Delta Technics Engineering, Breda (Netherlands)

    2011-03-15

    Smart solutions to reduce the energy consumption are continuously part of investigation in the refrigeration technology. This article subscribed the technology on which way energy can be saved at the operation of screw compressors which are used in air conditioners and refrigerating machinery. The combination of frequency control and Vi-control (intrinsic volumetric ratio) such as researched in the laboratory of RefComp is for the user attractive because the energy efficiency during part load operation is much better. Smart uses of thermodynamics, electric technology and electronic control are the basics of these applications. According to the manufacturer's information it is possible with these new generation screw compressors to save approx. 26% energy in comparison with the standard screw compressor. [Dutch] In dit artikel wordt de technologie omschreven waarmee veel energie bespaard kan worden bij schroefcompressoren die worden gebruikt in airconditioningsystemen en koel- en vriesinstallaties. De combinatie van frequentieregeling en Vi- regeling (Vi is de intrinsieke volumetrische verhouding) zoals onderzocht in het laboratorium van RefComp biedt de gebruiker veel voordelen doordat de energie-efficintie van de compressor tijdens deellast enorm wordt verbeterd. Slim gebruik van thermodynamika, elektrotechniek en elektronica vormen de basis van deze toepassing. Volgens de fabrikant kan met deze nieuwe generatie schroefcompressoren circa 26 procent op het energiegebruik tijdens deellast worden bespaard in vergelijking met de standaard serie schroefcompressoren.

  1. Heat savings and heat generation technologies: Modelling of residential investment behaviour with local health costs

    International Nuclear Information System (INIS)

    Zvingilaite, Erika; Klinge Jacobsen, Henrik

    2015-01-01

    The trade-off between investing in energy savings and investing in individual heating technologies with high investment and low variable costs in single family houses is modelled for a number of building and consumer categories in Denmark. For each group the private economic cost of providing heating comfort is minimised. The private solution may deviate from the socio-economical optimal solution and we suggest changes to policy to incentivise the individuals to make choices more in line with the socio-economic optimal mix of energy savings and technologies. The households can combine their primary heating source with secondary heating e.g. a woodstove. This choice results in increased indoor air pollution with fine particles causing health effects. We integrate health cost due to use of woodstoves into household optimisation of heating expenditures. The results show that due to a combination of low costs of primary fuel and low environmental performance of woodstoves today, included health costs lead to decreased use of secondary heating. Overall the interdependence of heat generation technology- and heat saving-choice is significant. The total optimal level of heat savings for private consumers decrease by 66% when all have the option to shift to the technology with lowest variable costs. - Highlights: • Heat saving investment and heat technology choice are interdependent. • Health damage costs should be included in private heating choice optimisation. • Flexibility in heating technology choice reduce the optimal level of saving investments. • Models of private and socioeconomic optimal heating produce different technology mix. • Rebound effects are moderate but varies greatly among consumer categories

  2. Dynamic resource allocation using performance forecasting

    NARCIS (Netherlands)

    Moura, Paulo; Kon, Fabio; Voulgaris, Spyros; Van Steen, Maarten

    2016-01-01

    To benefit from the performance gains and cost savings enabled by elasticity in cloud IaaS environments, effective automated mechanisms for scaling are essential. This automation requires monitoring system status and defining criteria to trigger allocation and deallocation of resources. While these

  3. Cultural Implications of Human Resource Development.

    Science.gov (United States)

    Hiranpruk, Chaiskran

    A discussion of the cultural effects of economic and, by extension, human resource development in Southeast Asia looks at short- and long-term implications. It is suggested that in the short term, increased competition will affect distribution of wealth, which can promote materialism and corruption. The introduction of labor-saving technology may…

  4. Grant management procedure for energy saving TDM-PONs

    Science.gov (United States)

    Alaelddin, Fuad Yousif Mohammed; Newaz, S. H. Shah; AL-Hazemi, Fawaz; Choi, Jun Kyun

    2018-01-01

    In order to minimize energy consumption in Time Division Multiplexing-Passive Optical Network (TDM-PON), IEEE and ITU-T have mandated sleep mode mechanism for Optical Network Units (ONUs) in the latest TDM-PON standards (e.g. IEEE P1904.1 SIEPON, ITU-T G.sup45). The sleep mode mechanism is a promising mean for maximizing energy saving in an ONU. An ONU in sleep mode flips between sleep and active state depending on the presence or absent of upstream and downstream frames. To ensure Quality of Service (QoS) of upstream frames, the recent TDM-PON standards introduced an early wake-up mechanism, in which an ONU is forced to leave the sleep state on upstream frame arrival. When the Optical Line Terminal (OLT) of a TDM-PON allows early wake-up of its connected ONUs, it allocates gratuitous grants for the sleeping ONUs along with allocating upstream grants for the ONUs in active state. Note that, the gratuitous grants control message sent periodically by the OLT on Inter-Gratuitous grant Interval (IGI) time. After leaving sleep state due to the arrival of upstream frame, the ONU uses its allocated gratuitous grant to send a control message mentioning the amount of upstream bandwidth (upstream grant) required in order to forward the remaining frames in its buffer. However, the existing early wake-up process of ONU can lead to increase the energy consumption of an ONU. It is because of the ONU wakes-up immediately from the sleep state on arrival of the upstream frame, but even so, it needs to wait for forwarding the frame until its allocated gratuitous grant period, resulting in spending energy unnecessarily. In addition, current energy saving solution for TDM-PONs do not provide a clear solution on how to manage different types of grants (e.g. listening grant, upstream transmission grant) within a Dynamic Bandwidth Allocation (DBA) polling cycle. To address this problem, we propose a state-of-art Grant Management Procedure (GMP) in order to maximize energy saving in a TDM

  5. REMINDER Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2)Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the interest of all parties concerned. This automatic transfer procedure has a number of advantages for participants in the SLS scheme. First, staff members will no longer have to take any administrative steps. Secondly, the new proced...

  6. The creation of the SAVE consortium – Saving Asia's Vultures from ...

    African Journals Online (AJOL)

    This article describes the background to this problem, caused mainly by the veterinary drug diclofenac, and the establishment and structure of the SAVE consortium created to help coordinate the necessary conservation response. The lessons learnt in Asia and the working model of such a consortium are presented, which ...

  7. A procedure for analysing energy savings in multiple small solar water heaters installed in low-income housing in Brazil

    International Nuclear Information System (INIS)

    Giglio, Thalita; Lamberts, Roberto; Barbosa, Miriam; Urbano, Mariana

    2014-01-01

    Due to government subsidies, Brazil has witnessed an increase in the installation and use of small solar water heating systems in low-income housing projects. Although the initiative has reduced the load curve during peak times due to the reduced use of electric showerheads, measurement and verification (M and V) are needed to validate the savings. M and V procedures should take into account the social and economic variability of low-income housing developments. To improve M and V in low-income housing projects, this paper presents a methodology for identifying homogeneous subgroups based on their energy-saving potential. This research strategy involved a cluster analysis designed to improve the understanding of what energy savers and other influencing factors exist. A case study in Londrina Brazil was undertaken with 200 low-income families. Five clusters, created based on savings potential, were defined. The results showed that only two clusters demonstrated good electricity savings, representing 47% of families. However, two clusters, or 37%, did not provide satisfactory savings, and the other 16% did not provide any consumption history due to previous use of illegal city electricity connection practices. Therefore, studies confirm the need for a detailed measurement of the representative subgroups to assess the influence of human behaviour on potential SWHS-induced savings. - Highlights: • M and V is necessary to improve solar collector-area-based subsidy programmes. • M and V in large-scale sample should contemplate the social and economic variability. • Samples with homogeneous subgroups contribute to a consistent energy-saving M and V. • Solar Water Heaters in some cases may not offer energy saving in a low-income context. • SWH performance decreases with low educational level and difficulty of operation

  8. Missouri Agricultural Energy Saving Team-A Revolutionary Opportunity (MAESTRO)

    Energy Technology Data Exchange (ETDEWEB)

    McIntosh, Jane [MDA; Schumacher, Leon [University of Missouri

    2014-10-23

    The Missouri Agricultural Energy Saving Team-A Revolutionary Opportunity (MAESTRO) program brought together a team of representatives from government, academia, and private industry to enhance the availability of energy efficiency services for small livestock producers in the State of Missouri. The Missouri Department of Agriculture (MDA) managed the project via a subcontract with the University of Missouri (MU), College of Agriculture Food and Natural Resources, MU Extension, the MU College of Human Environmental Sciences, the MU College of Engineering, and the Missouri Agricultural and Small Business Development Authority (MASBDA). MU teamed with EnSave, Inc, a nationally-recognized expert in agricultural energy efficiency to assist with marketing, outreach, provision of farm energy audits and customer service. MU also teamed with independent home contractors to facilitate energy audits of the farm buildings and homes of these livestock producers. The goals of the project were to: (1) improve the environment by reducing fossil fuel emissions and reducing the total energy used on small animal farms; (2) stimulate the economy of local and regional communities by creating or retaining jobs; and (3) improve the profitability of Missouri livestock producers by reducing their energy expenditures. Historically, Missouri scientists/engineers conducted programs on energy use in agriculture, such as in equipment, grain handling and tillage practices. The MAESTRO program was the first to focus strictly on energy efficiency associated with livestock production systems in Missouri and to investigate the applicability and potential of addressing energy efficiency in animal production from a building efficiency perspective. A. Project Objectives The goal of the MAESTRO program was to strengthen the financial viability and environmental soundness of Missouri's small animal farms by helping them implement energy efficient technologies for the production facility, farm

  9. Water Resources

    International Nuclear Information System (INIS)

    Abira, M.A.

    1997-01-01

    Water is essential for life and ecological sustenance; its availability is essential component of national welfare and productivity.The country's socio-economic activities are largely dependent on the natural endowment of water resources. Kenya's water resources comprises of surface waters (rivers, lakes and wetlands) and ground water. Surface water forms 86% of total water resources while the rest is ground water Geological, topographical and climatic factors influence the natural availability and distribution of water with the rainfall distribution having the major influence. Water resources in Kenya are continuously under threat of depletion and quality degradation owing to rising population, industrialization, changing land use and settlement activities as well as natural changes. However, the anticipated climate change is likely to exacerbate the situation resulting in increased conflict over water use rights in particular, and, natural resource utilisation in general. The impacts of climate change on the water resources would lead to other impacts on environmental and socio-economic systems

  10. The model of creation of energy-saving competence of students of high school

    Directory of Open Access Journals (Sweden)

    Zeer Evald

    2016-01-01

    Full Text Available This article considers the most important conditions for the creationof energy-saving competence of students – undergraduate training. The actualityof the problem is caused by low energy efficiency of industrial production, significantly reduces the competitiveness of the domestic economy and, consequently, the need to intensify activities on the rational use of energy resources. The definition of energy-saving expertise, marked its structural components (value-motivational, cognitive activity-reflexive. Stages of creationof energy-saving expertise in system of continuous vocational training: diagnosis, motivation, learning and reflective-evaluative. The possibilities of educational technology and psycho designed to work with the psychological barriers and resistance to the process of regulation of energy consumption, the production facilities at its energy efficiency and energy saving. In particular, it is recommended to use active learning methods (discussion, games, analysis of problem situations, etc., Information and communication technologies for the implementation of educational and research projects in the field of energy conservation, the development and implementation of interactive multimedia learning environments.

  11. Conceptual provisions of the implementation of energy saving measures in the residential facilities

    Directory of Open Access Journals (Sweden)

    Meshcheryakova Tatiana

    2017-01-01

    Full Text Available Research purpose is identification of sales problems of energy saving actions for residential sector of economy, including with use of the power service contract. The choice of the object of the study is related to the general issues on energy saving of residential facilities and increasing the number of unresolved problems. Unfortunately, the efficiency of energy consumption of housing stock is extremely low that directly leads to an increase in citizens’ payments for public utilities (housing and communal services. There are many problems associated with the aging of fixed assets: it becomes especially evident in winter seasons. The level of quality of delivery, distribution and consumption of expensive heat resources that has the greatest impact on a residence comfort and sometimes human life and health, is very low. Our population faces to year overheating or freezing, to leakages through worn pipes and the subsequent disconnection of water and heat. Despite the public declaration of the of the active processes of modernization of the housing municipal economy in the Russian Federation, the implementation of the necessary energy-saving elements in the housing sector is evolving very slowly. The article presents conceptual positions, which will bring the issues related to energy saving and efficiency to a new level.

  12. Implementation of the Save and Restoration application for KOMAC operation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae-Ha; Song, Young-Gi; Kwon, Hyeok-Jung; Cho, Yong-Sub [Korea Atomic Energy Research Institute, Gyeongju (Korea, Republic of)

    2016-10-15

    KOMAC has been operating a 100 MeV proton linear Accelerator. There are about 10,000 PVs for operating the 100 MeV proton linac. It is important to archive the operating parameters for operating beam lines and machine study. The parameters are reported manually and with screenshot. There not fixed reporting type so it is difficult to compare archived data. To improve and compensate the reporting system, a Save and Restoration application, which is based on JAVA has been implemented and connected with KOMAC Control system based on EPICS with JCA library. The operating data are saved in Save and Restoration Server in file type, and are restored to the required values using the saved files. This paper presents Implementation of the Save and Restoration application and its function. The group list is shown in restore page using reload button. The saved value of the PVs in group is shown as selecting a group which clients require and current values are appeared beside the restore value table to compare with saved data. The set restore button input the values in restore value table to each PV. The Save and Restore application save and restore the value of the PVs that clients require. The application is installed in client PC but data are archived in save and restore server in file format.

  13. Saving energy. [Metal Coating With Infrared Dryers

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, K

    1981-01-01

    One way of saving energy in metal coating is by using electrically heated infrared dryers with medium-wave radiation (2 to 3 ..mu..m). The absorbing capacity of varnishes and plastic coatings is >90% in this range so that the radiation energy is almost completely transformed into heat. Medium-wave radiation sources have a much higher service life than short-wave sources (30.000 hours of operation) and do not require cooling; compared with long-wave sources, they have a higher heat transfer and thus much shorter drying times. The main fields of application, a cost example, and practical examples among the customers of Messrs. Eisenmann are presented.

  14. Does nuclear energy save global environment?

    International Nuclear Information System (INIS)

    Matsui, Kazuaki

    2006-01-01

    Since the ecological footprint analysis in 1970s suggested changing consumption patterns and overpopulation concerns, energy policy such as energy conservation and use of renewable energy has become of prime importance. Several results of the long-term energy demand and supply analysis in 2050 or 2100 to reduce drastically carbon dioxide emission as a measure against global warming, showed the necessity of nuclear power deployment as well as maximum efforts to save energy, exploitation of the separation and disposal of carbon dioxide, and shifting energy sources to fuels that emit less greenhouse gases or non-fossil fuels. As a promising means to contribute to long-term energy supply, nuclear power generation is expected with improving safety, economic efficiency, environmental adaptability, and nuclear proliferation resistance of the technologies. (T.Tanaka)

  15. Reform Proposals for Replenishing Retirement Savings

    Directory of Open Access Journals (Sweden)

    Jack M. Mintz

    2013-02-01

    Full Text Available The 2008-2009 economic crisis dealt a serious blow to Canadians’ retirement savings. While markets have since partially recovered, the ratio of Canadians’ household net-worth relative to disposable income still remains below where it was in 2007. So much wealth that workers had accumulated to prepare for retirement has been wiped away, while the years since 2008 that might have otherwise been spent compounding retirement savings have been spent, instead, on trying to recover losses in a low-interest-rate environment that has limited returns. With large waves of older workers approaching retirement age, and these future retirees projected to live longer than previous cohorts, Canada now faces the very realistic scenario that a significant number of people will reach retirement age without the funds they will need to provide a comfortable post-working-life income. Canadian policy-makers may not have the ability to restore that destroyed wealth. And with most governments already struggling to resolve serious deficits, the situation is not likely to be ameliorated with anything that requires additional spending, or that could reduce tax revenues. But there are policy reforms available that can help at least in better preparing the coming waves of retirees for a financially secure retirement. The reforms need not be far-reaching to have a meaningful impact. And they need not be costly, either. They can include a modest expansion of the Canada Pension Plan (CPP to allow larger contributions — shared by employers and employees, or covered entirely by employees — that would, in turn, allow retiring workers to draw a larger maximum pension, rather than having to rely on the guaranteed income supplement (GIS. CPP contributions could also be made deductible from taxable income, like RRSP investments, to encourage workers to maximize contributions. To minimize an increase in payroll taxes, the eligibility age for CPP benefits could be increased to

  16. Cost savings from extended life nuclear plants

    International Nuclear Information System (INIS)

    Forest, L.R. Jr.; Deutsch, T.R.; Schenler, W.W.

    1988-09-01

    This study assesses the costs and benefits of nuclear power plant life extension (NUPLEX) for the overall US under widely varying economic assumptions and compares these with alternative new coal- fired plants (NEWCOAL). It is found that NUPLEX saves future electricity consumers more than 3 cents/-kwh compared with NEWCOAL. The NUPLEX costs and benefits for existing individual US nuclear power plants under base-line, or most likely, assumptions are assessed to determine the effects of the basic plant design and plant age. While benefits vary widely, virtually all units would have a positive benefit from NUPLEX. The study also presents a cost-benefit analysis of the nuclear industry's planned advanced light water reactor (ALWR). It is concluded that ALWR offers electrical power at a substantially lower cost than NEWCOAL. 9 refs., 6 figs

  17. Potential cost savings with terrestrial rabies control

    Directory of Open Access Journals (Sweden)

    Cherry Bryan

    2007-04-01

    Full Text Available Abstract Background The cost-benefit of raccoon rabies control strategies such as oral rabies vaccination (ORV are under evaluation. As an initial quantification of the potential cost savings for a control program, the collection of selected rabies cost data was pilot tested for five counties in New York State (NYS in a three-year period. Methods Rabies costs reported to NYS from the study counties were computerized and linked to a human rabies exposure database. Consolidated costs by county and year were averaged and compared. Results Reported rabies-associated costs for all rabies variants totalled $2.1 million, for human rabies postexposure prophylaxes (PEP (90.9%, animal specimen preparation/shipment to laboratory (4.7%, and pet vaccination clinics (4.4%. The proportion that may be attributed to raccoon rabies control was 37% ($784,529. Average costs associated with the raccoon variant varied across counties from $440 to $1,885 per PEP, $14 to $44 per specimen, and $0.33 to $15 per pet vaccinated. Conclusion Rabies costs vary widely by county in New York State, and were associated with human population size and methods used by counties to estimate costs. Rabies cost variability must be considered in developing estimates of possible ORV-related cost savings. Costs of PEPs and specimen preparation/shipments, as well as the costs of pet vaccination provided by this study may be valuable for development of more realistic scenarios in economic modelling of ORV costs versus benefits.

  18. Barriers to investments in energy saving technologies. Case study for the industry

    NARCIS (Netherlands)

    Masselink, Dirk Jan

    2007-01-01

    To realise future energy saving targets, the government needs to increase energy reduction rates. One option to increase energy savings is found in removing barriers to investments in cost-effective energy saving technologies. Many technologies save energ

  19. Development of strategies for saving energy by temperature reduction in warm forging processes

    Science.gov (United States)

    Varela, Sonia; Santos, Maite; Vadillo, Leire; Idoyaga, Zuriñe; Valbuena, Óscar

    2016-10-01

    This paper is associated to the European policy of increasing efficiency in raw material and energy usage. This policy becomes even more important in sectors consuming high amount of resources, like hot forging industry, where material costs sums up to 50% of component price and energy ones are continuously raising. The warm forging shows a clear potential of raw material reduction (near-net-shape components) and also of energy saving (forging temperature under 1000°C). However and due to the increment of the energy costs, new solutions are required by the forging sector in order to reduce the temperature below 900°C. The reported research is based on several approaches to reduce the forging temperature applied to a flanged shaft of the automotive sector as demonstration case. The developed investigations have included several aspects: raw material, process parameters, tools and dies behavior during forging process and also metallographic evaluation of the forged parts. This paper summarizes analysis of the ductility and the admissible forces of the flanged shaft material Ck45 in as-supplied state (as-rolled) and also in two additional heat treated states. Hot compression and tensile tests using a GLEEBLE 3800C Thermo mechanical simulator have been performed pursuing this target. In the same way, a coupled numerical model based on Finite Element Method (FEM) has been developed to predict the material flow, the forging loads and the stresses on the tools at lower temperature with the new heat treatments of the raw material. In order to validate the previous development, experimental trials at 850 °C and 750 °C were carried out in a mechanical press and the results were very promising.

  20. Energy saved neon sign lighting power supply for photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Tanitteerapan, T.; Dokpikul, S.; Arunrungrasmi, S. [King Mongkut Univ. of Technology Thonburi, Bangmod, Tungkru, Bangkok (Thailand). Dept. of Electrical Technology Education, Faculty of Industrial Education

    2007-07-01

    Petroleum oil, natural gas and fossil fuels are commonly used in power plants for electrical power generation. However, because of their negative environmental impacts, energy and environmental savings from renewable energy resources are necessary choices. Solar energy can be converted to the electrical voltage by using solar arrays. This process can be used in many electrical applications. This paper introduced a neon sign lighting power supply for a small photovoltaic powered stand-alone commercial advertising board for a remote area in Thailand. The circuit implementation was very simple, consisting of an active switch device, a resonant capacitor and high frequency transformer. The control also operated as a fixed frequency and fixed duty ratio controller. The paper discussed the principle of neon sign lighting, power circuit operation, and control circuit operation. To verify the proposed power supply, the circuit experiment of the proposed power supply for the neon sign lighting was applied to a 10 foot long, 10 millimeter diameter bulb. The neon sign was ignited smoothly with little power consumption. 2 refs., 1 tab., 10 figs.

  1. Planning for resource efficient cities

    DEFF Research Database (Denmark)

    Fertner, Christian; Groth, Niels Boje

    2016-01-01

    development from energy consumption are crucial for a city’s future vulnerability and resilience against changes in general resource availability. The challenge gets further complex, as resource and energy efficiency in a city is deeply interwoven with other aspects of urban development such as social...... structures and the geographical context. As cities are the main consumer of energy and resources, they are both problem and solution to tackle issues of energy efficiency and saving. Cities have been committed to this agenda, especially to meet the national and international energy targets. Increasingly......, cities act as entrepreneurs of new energy solutions acknowledging that efficient monitoring of energy and climate policies has become important to urban branding and competitiveness. This special issue presents findings from the European FP7 project ‘Planning for Energy Efficient Cities’ (PLEEC...

  2. Diplopia due to Dacryops

    Directory of Open Access Journals (Sweden)

    Rahmi Duman

    2013-01-01

    Full Text Available Dacryops is a lacrimal ductal cyst. It is known that it can cause globe displacement, motility restriction, and proptosis because of the mass effect. Diplopia due to dacryops has not been reported previously. Here, we present a 57-year-old man with binocular horizontal diplopia that occurred during left direction gaze due to dacryops.

  3. The substantive core of introduction of the saving production into educational process of the higher technical educational institution

    Directory of Open Access Journals (Sweden)

    Світлана Станіславівна Єрмакова

    2016-03-01

    Full Text Available Problem and topicality of research consist in the study of theoretical and methodological problems at using the base of saving production in the higher educational institutions taking into account the special features of its activity, specificity of problems and tasks.Aim of the article was the grounding of the system of development of the higher technical education on the principles of economy. The problems consist in disclosure and substantiation of the elements of development of the higher technical education system taking into account the principles of saving production; determination of the possible use of saving production instruments in higher education sphere especially in the modern educational institution.Methods of research were the following: methods of analysis, prognostication, diagnostics, observation, pedagogical experiment.The concretized essence of saving use of the higher technical educational institution resources embodied in experimental monitoring technology of professional training of the future specialists in the higher technological educational institution on the base of idea of saving production. There was proved pedagogical expediency of advanced training of the future specialists in the process of their professional training in the higher technical educational institution on the base of saving production at its professional activity. There were substantiated: the lean-technology of professional training in the higher technical educational institution in the context of idea of continuous education based on principles of saving “production of knowledge” is the system of continuous monitoring of educational process effectiveness and of the saving use of its possibilities in the higher technical educational institution as the dominant of the future engineers training that is directed on the permanent revelation and neutralization of educational losses for the development of professionalism and creation at the expense

  4. Rules of Thumb in Life-Cycle Saving Decisions

    OpenAIRE

    Winter, Joachim; Schlafmann, Kathrin; Rodepeter, Ralf

    2011-01-01

    We analyse life-cycle saving decisions when households use simple heuristics, or rules of thumb, rather than solve the underlying intertemporal optimization problem. We simulate life-cycle saving decisions using three simple rules and compute utility losses relative to the solution of the optimization problem. Our simulations suggest that utility losses induced by following simple decision rules are relatively low. Moreover, the two main saving motives re ected by the canonical life-cyc...

  5. Liquidity in Retirement Savings Systems: An International Comparison

    OpenAIRE

    Beshears, John Leonard; Choi, James J.; Hurwitz, Joshua Bayard; Laibson, David I.; Madrian, Brigitte

    2015-01-01

    What is the socially optimal level of liquidity in a retirement savings system? Liquid retirement savings are desirable because liquidity enables agents to flexibly respond to pre-retirement events that raise the marginal utility of consumption. On the other hand, pre-retirement liquidity is undesirable when it leads to under-saving arising from, for example, planning mistakes or self-control problems. This paper compares the liquidity that six developed economies have built into their employ...

  6. Crushing leads to waste disposal savings for FUSRAP

    Energy Technology Data Exchange (ETDEWEB)

    Darby, J. [Department of Energy, Oak Ridge, TN (United States)

    1997-02-01

    In this article the author discusses the application of a rock crusher as a means of implementing cost savings in the remediation of FUSRAP sites. Transportation and offsite disposal costs are at present the biggest cost items in the remediation of FUSRAP sites. If these debris disposal problems can be handled in different manners, then remediation savings are available. Crushing can result in the ability to handle some wastes as soil disposal problems, which have different disposal regulations, thereby permitting cost savings.

  7. Do Medicaid home and community based service waivers save money?

    Science.gov (United States)

    Harrington, Charlene; Ng, Terence; Kitchener, Martin

    2011-10-01

    This article estimates the potential savings to the Medicaid program of using 1915c Home and Community Based Services (HCBS) waivers rather than institutional care. For Medicaid HCBS waiver expenditures of $25 billion in 2006, we estimate the national savings to be over $57 billion, or $57,338 per waiver participant in 2006 compared with the cost of Medicaid institutional care (for which all waiver participants are eligible). When taking into account a potential 50% "woodwork effect" (for people who might have refused institutional services), the saving would be $21 billion. This analysis demonstrates that HCBS waiver programs present significant direct financial savings to Medicaid long-term care (LTC) programs.

  8. Energy Saver: Tips on Saving Money & Energy at Home

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-09-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  9. Energy Savers Tips on Saving Energy& Money at Home

    Energy Technology Data Exchange (ETDEWEB)

    2003-06-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances

  10. Energy Savings Potential and Research & Development Opportunities for Commercial Refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-09-01

    This study documents the energy consumption of commercial refrigeration equipment (CRE) in the U.S. and evaluated the energy savings potential of various technologies and energy efficiency measures that could be applied to such equipment. The study provided an overview of CRE applications, assessed the energy-savings potential of CRE in the U.S., outline key barriers to adoption of energy-savings technologies, and recommended opportunities for advanced energy saving technology research. The study was modeled after an earlier 1996 report by Arthur D. Little, Inc., and updated key information, examined more equipment types, and outlined long-term research and development opportunities.

  11. Technical energy savings versus changes in human behaviour

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1996-01-01

    Energy savings seems to be the most environmentally benign element in an energy policy. The paper is a reflection on the work on saving energy both by improving technology and by adapting human daily behaviour. A simple model is suggested for the energy chain which converts the primary energy all...... the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life...

  12. Will Instructors Save Time Using a Specifications Grading System?

    Directory of Open Access Journals (Sweden)

    Sarah Grace Prescott

    2015-08-01

    Full Text Available Review of: Specifications Grading: Restoring Rigor, Motivating Students, and Saving Faculty Time; Linda Nilson and Claudia J. Stranny; (2014. Stylus Publishing, Sterling, VA. 184 pages.

  13. Energy Savers: Tips on Saving Money & Energy at Home

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-12-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  14. Energy Savers: Tips on Saving Money & Energy at Home

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-05-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  15. What actions in the domain of energy saving?

    International Nuclear Information System (INIS)

    Gourlia, J.P.; Richard, P.

    2007-01-01

    The energy saving potentialities are very often put forward to justify actions of mastery of energy demand. What are the possible substitutes and their result in terms of energy saving? What are the tools implemented and the services proposed by energy suppliers to end-users? What is the optimum mix between the regulatory measures and the market instruments to perform energy saving? What are the costs generated by such measures with respect to the expected results? How to sensibilize citizens to energy saving actions? These questions were debated during a round table which gathered 4 participants and two chairmen. (J.S.)

  16. Inferring Saving in Training Time From Effect Size Estimates

    National Research Council Canada - National Science Library

    Burright, Burke

    2000-01-01

    .... Students' time saving represents a major potential benefit of using them. This paper fills a methodology gap in estimating the students' timesaving benefit of asynchronous training technologies...

  17. Saving doses by outage planning strategy and architectural arrangements

    International Nuclear Information System (INIS)

    Wahlstroem, B.

    1993-01-01

    All radiation doses come out as a result of dose rate and exposure time, and the main part of the occupational exposure is caused during outages. While every reasonable attempt should be made to lower the dose rates, the other factor, the exposure time, may not be forgotten. The paper presents possible ways of saving man-hours in the controlled zone by outage planning strategy. And every saved man-hour means a saved radiation dose. At Loviisa NPS also some special architectural arrangements contribute to shortening the outage time, thus saving doses

  18. Survey report for fiscal 1999 on internationalization of technologies for effective use of energy resources. Survey by exploration of international cooperative researches on energy-saving through advanced use of steel slag; 1999 nendo energy shigen yuko riyo gijutsu kenkyu kokusaika chosa hokokusho. Tekko slag no kodo riyo ni yoru sho energy gijutsu ni kansuru kokusai kyodo kenkyu no tansaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As for the collection of sensible heat, 1/3 of blast-furnace slag is treated to the purpose at the Teesside Technology Centre, Britain, but none is collected in the latter half of tapping in case there is so much slag that cooling cannot be done in time. In the case of a large blast furnace, some measures have to be contrived because molten iron comes out of the furnace intermittently. In Germany, the heat collection rate is as low as 3%, with no effort made at heat collection. In North America, desire to develop such a technology is not strong. A visit was made to the Institute of Ocean Sciences, Canada, in relation to the concept of using steel slag as a eutrophic source for marine photo-plankton. A large-scale long-term test is under way for examining the relationship between global warming and ocean current circulation. There are possibilities that Japan will enter into the project for a joint study, for example, of heavy metal elution from slag though the test fails to name slag as the direct object of study. Not only for Canada but also for any other country who faces the sea, it may be a meaningful national policy to inject some active ingredients into the sea for an increase in living marine resources. Greece is engaged in the ocean dumping of nickel slag on an experimental basis but, in view of the purpose of the experiment, Japan will not be a participant in the project. (NEDO)

  19. Energy Savings From System Efficiency Improvements in Iowa's HVAC SAVE Program

    Energy Technology Data Exchange (ETDEWEB)

    Yee, S. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Baker, J. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Brand, L. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States); Wells, J. [Partnership for Advanced Residential Retrofit, Chicago, IL (United States)

    2013-08-01

    The objective of this project is to explore the energy savings potential of maximizing furnace and distribution system performance by adjusting operating, installation, and distribution conditions. The goal of the Iowa HVAC System Adjusted and Verified Efficiency (SAVE) program is to train contractors to measure installed system efficiency as a diagnostic tool to ensure that the homeowner achieves the energy reduction target for the home rather than simply performing a tune-up on the furnace or having a replacement furnace added to a leaky system. The PARR research team first examined baseline energy usage from a sample of 48 existing homes, before any repairs or adjustments were made, to calculate an average energy savings potential and to determine which system deficiencies were prevalent. The results of the baseline study of these homes found that, on average, about 10% of the space heating energy available from the furnace was not reaching the conditioned space. In the second part of the project, the team examined a sample of 10 homes that had completed the initial evaluation for more in-depth study. For these homes, the diagnostic data shows that it is possible to deliver up to 23% more energy from the furnace to the conditioned space by doing system tune ups with or without upgrading the furnace. Replacing the furnace provides additional energy reduction. The results support the author's belief that residential heating and cooling equipment should be tested and improved as a system rather than a collection of individual components.

  20. A REALLY WHEEZY WAY TO SAVE MONEY.

    Science.gov (United States)

    Li, Grace; Almossawi, Ofran; Dulfeker, Hasna; Jones, Vicky; Taylor, Felicity

    2016-09-01

    to £2.48 for the equivalent dose of non-soluble prednisolone dispensed with a tablet crusher. Several hospital trusts have switched to using non-soluble prednisolone in order to achieve cost savings, but there have been anecdotal reports of poor palatability, raising concerns about compliance with taking medication once discharged.The switch from a soluble to a non-soluble formulation of prednisolone represents an annual saving of more than £44,000 for this hospital alone and, at scale, could realise substantial potential savings to the NHS, without compromising patients' clinical care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/