WorldWideScience

Sample records for resistance test type

  1. Heat resistant/radiation resistant cable and incore structure test device for FBR type reactor

    International Nuclear Information System (INIS)

    Tanimoto, Hajime; Shiono, Takeo; Sato, Yoshimi; Ito, Kazumi; Sudo, Shigeaki; Saito, Shin-ichi; Mitsui, Hisayasu.

    1995-01-01

    A heat resistant/radiation resistant coaxial cable of the present invention comprises an insulation layer, an outer conductor and a protection cover in this order on an inner conductor, in which the insulation layer comprises thermoplastic polyimide. In the same manner, a heat resistant/radiation resistant power cable has an insulation layer comprising thermoplastic polyimide on a conductor, and is provided with a protection cover comprising braid of alamide fibers at the outer circumference of the insulation layer. An incore structure test device for an FBR type reactor comprises the heat resistant/radiation resistant coaxial cable and/or the power cable. The thermoplastic polyimide can be extrusion molded, and has excellent radiation resistant by the extrusion, as well as has high dielectric withstand voltage, good flexibility and electric characteristics at high temperature. The incore structure test device for the FBR type reactor of the present invention comprising such a cable has excellent reliability and durability. (T.M.)

  2. Static Pull Testing of a New Type of Large Deformation Cable with Constant Resistance

    Directory of Open Access Journals (Sweden)

    Zhigang Tao

    2017-01-01

    Full Text Available A new type of energy-absorbing cable, Constant-Resistance Large Deformation cable (CRLD cable with three different specifications, has been recently developed and tested. An effective cable should occupy the ability of absorbing deformation energy from these geodisaster loads and additionally must be able to yield with the sliding mass movements and plastic deformation over large distances at high displacement rates. The new cable mainly consists of constant-resistance casing tube and frictional cone unit that transfers the load from the slope. When experiencing a static or dynamic load and especially the load exceeding the constant resistance force (CR-F, a static friction force derived from the movement of frictional cone unit in casing tube of CRLD cable, the frictional cone unit will move in the casing tube along the axis and absorb deformation energy, accordingly. In order to assess the performance of three different specified cables in situ, a series of field static pull tests have been performed. The results showed that the first type of CRLD cable can yield 2000 mm displacement while acting 850 kN static pull load, which is superior to that of other two types, analyzing based on the length of the displacement and the level of static pull load.

  3. 42 CFR 84.157 - Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum...

    Science.gov (United States)

    2010-10-01

    ... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2010-10-01 2010-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...

  4. 42 CFR 84.156 - Airflow resistance test; Type C supplied-air respirator, demand class; minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... C supplied-air respirator, demand class; minimum requirements. (a) Inhalation resistance shall not... 42 Public Health 1 2010-10-01 2010-10-01 false Airflow resistance test; Type C supplied-air respirator, demand class; minimum requirements. 84.156 Section 84.156 Public Health PUBLIC HEALTH SERVICE...

  5. GenoType HelicoDR test in the determination of antimicrobial resistance of Helicobacter pylori in Korea.

    Science.gov (United States)

    Lee, Jung Won; Kim, Nayoung; Nam, Ryoung Hee; Park, Ji Hyun; Choi, Yoon Jin; Kim, Jung Mogg; Kim, Joo Sung; Jung, Hyun Chae

    2014-09-01

    Antimicrobial resistance of Helicobacter pylori is most important factor in eradication success. GenoType HelicoDR test has been developed for rapid detection of antimicrobial resistance. The present study evaluated the clinical usefulness of GenoType HelicoDR test in Korea. To detect 23S rRNA for clarithromycin resistance and gyrA mutations for fluoroquinolone resistance, both DNA sequencing after minimal inhibitory test (MIC) and GenoType HelicoDR test were performed in H. pylori isolates from the gastric mucosa of 101 patients. The eradication results of clarithromycin and moxifloxacin-containing triple therapy were evaluated by the 23S rRNA and gyrA mutations. For 42 isolates with A2143G mutation by GenoType HelicoDR, 83.3% (35/42) of concordance rate was estimated with DNA sequencing method and 85.7% (36/42) for MIC test. For 43 isolates with N87K mutation by GenoType HelicoDR, 71.1% (31/43) of concordance rate was estimated with DNA sequencing and 88.4% (38/43) for MIC test. The sensitivity and specificity of GenoType HelicoDR test in determination of 23S rRNA mutation were 94.9% and 87.1%, and those of gyrA 98.2% and 80.0%. The sensitivity and specificity of GenoType HelicoDR test in determination of clarithromycin resistance based on MIC test were 55.0% and 80.0%, for fluoroquinolone 74.4% and 70.0%. GenoType HelicoDR test is useful to determine mutations responsible for clarithromycin or fluoroquinolone-containing eradication failure but has a limitation for the clinical applicability in determination of resistance.

  6. Evaluation of a New Test, GenoType HelicoDR, for Molecular Detection of Antibiotic Resistance in Helicobacter pylori▿

    Science.gov (United States)

    Cambau, Emmanuelle; Allerheiligen, Vera; Coulon, Céline; Corbel, Céline; Lascols, Christine; Deforges, Lionel; Soussy, Claude-James; Delchier, Jean-Charles; Megraud, Francis

    2009-01-01

    The eradication rate of Helicobacter pylori by standard therapy is decreasing due to antibiotic resistance, mainly to clarithromycin. Our aim was to provide a new molecular test to guide the treatment of new and relapsed cases. We first studied 126 H. pylori strains for phenotypic (MIC) and genotypic resistance to clarithromycin (rrl mutation) and levofloxacin (gyrA mutation) and then developed a DNA strip genotyping test on the basis of the correlation results and literature data. Clinical strains (n = 92) and gastric biopsy specimens containing H. pylori (n = 105) were tested blindly with the new molecular test GenoType HelicoDR. The presence of mutations or the absence of hybridization with wild-type sequences was predictive, in rrl for clarithromycin resistance in 91 cases (mostly the A2147G mutation) and in gyrA for levofloxacin resistance in 58 cases (mutations at codon 87 or 91). Genotyping revealed a mix of genotypes in 33% of the cases, reflecting a coinfection or selection for resistant mutants. The sensitivity and specificity of detecting resistance were 94% and 99% for clarithromycin and 87% and 98.5% for levofloxacin, respectively. The concordance scores were 0.96 for clarithromycin and 0.94 for levofloxacin. With global resistance rates of 46% for clarithromycin and 25% for levofloxacin, which were observed for consecutive positive biopsy specimens from 2007 and 2008, the positive and negative predictive values for detecting resistance were 99% and 94% for clarithromycin and 96% and 96% for fluoroquinolone. GenoType HelicoDR is efficient at detecting mutations predictive of antibiotic resistance in H. pylori when applied to strains or directly to gastric biopsy specimens. PMID:19759218

  7. HIV Resistance Testing

    Science.gov (United States)

    ... 14, 2016 Select a Language: Fact Sheet 126 HIV Resistance Testing WHAT IS RESISTANCE? HOW DOES RESISTANCE ... ARVs. If you miss doses of your medications, HIV will multiply more easily. More mutations will occur. ...

  8. Neisseria gonorrhoeae: testing, typing and treatment in an era of increased antimicrobial resistance

    NARCIS (Netherlands)

    Wind, C.M.

    2017-01-01

    This thesis discusses the management of Neisseria gonorrhoeae infections while under threat of emerging antimicrobial resistance. It focuses on improved diagnostics, and antimicrobial resistance to current and future therapies. We describe a new method of targeted deferred culture, using nucleic

  9. Shock resistance testing

    International Nuclear Information System (INIS)

    Pouard, M.

    1984-03-01

    In the framework of mechanical tests and to answer the different requests for tests, the T.C.R (Transport Conditionnement et Retraitement) laboratory got test facilities. These installations allow to carry out tests of resistance to shocks, mainly at the safety level of components of nuclear power plants, mockups of transport casks for fuel elements and transport containers for radioactive materials. They include a tower and a catapult. This paper give a decription of the facilities and explain their operation way [fr

  10. Oxidative stress responses to a graded maximal exercise test in older adults following explosive-type resistance training

    DEFF Research Database (Denmark)

    Ceci, R.; Beltran Valls, M.R.; Duranti, G.

    2014-01-01

    We recently demonstrated that low frequency, moderate intensity, explosive-type resistance training (EMRT) is highly beneficial in elderly subjects towards muscle strength and power, with a systemic adaptive response of anti-oxidant and stress-induced markers. In the present study, we aimed to ev...

  11. Evaluation of the BACTEC MGIT 960 SL DST Kit and the GenoType MTBDRsl Test for Detecting Extensively Drug-resistant Tuberculosis Cases.

    Science.gov (United States)

    Tekin, Kemal; Albay, Ali; Simsek, Hulya; Sig, Ali Korhan; Guney, Mustafa

    2017-10-01

    The present study aimed to evaluate the performances of the BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl test for detecting second-line antituberculosis drug resistance in Multidrug-resistant TB (MDR-TB) cases. Forty-six MDR-TB strains were studied. Second-line antituberculosis drug resistances were detected using the BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl test. The Middlebrook 7H10 agar proportion method was used as the reference test. The sensitivity and specificity values for the BACTEC MGIT 960 SL DST kit were both 100% for amikacin, kanamycin, capreomycin (4 µg/mL), and ofloxacin; 100% and 95.3%, respectively, for capreomycin (10 µg/mL); and 85.7% and 100%, respectively, for moxifloxacin (0.5 µg/mL). The sensitivity and specificity values for the GenoType MTBDRsl test to detect fluoroquinolone and aminoglycoside/cyclic peptide resistance were 88.9% and 100%, respectively, for ofloxacin and 85.7% and 94.9%, respectively, for moxifloxacin (0.5 µg/mL). The accuracy of the GenoType MTBDRsl assay for kanamycin, capreomycin, ofloxacin, and moxifloxacin was lower than that of the BACTEC MGIT 960 SL DST. The BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl were successful in detecting second-line antituberculosis drug resistance. Preliminary results of the GenoType MTBDRsl are very valuable for early treatment decisions, but we still recommend additional BACTEC MGIT 960 SL DST kit usage in the routine evaluation of drug-resistant tuberculosis.

  12. Evaluation of the BACTEC MGIT 960 SL DST Kit and the GenoType MTBDRsl Test for Detecting Extensively Drug-resistant Tuberculosis Cases

    Science.gov (United States)

    Tekin, Kemal; Albay, Ali; Simsek, Hulya; Sig, Ali Korhan; Guney, Mustafa

    2017-01-01

    Objective: The present study aimed to evaluate the performances of the BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl test for detecting second-line antituberculosis drug resistance in Multidrug-resistant TB (MDR-TB) cases. Materials and Methods: Forty-six MDR-TB strains were studied. Second-line antituberculosis drug resistances were detected using the BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl test. The Middlebrook 7H10 agar proportion method was used as the reference test. Results: The sensitivity and specificity values for the BACTEC MGIT 960 SL DST kit were both 100% for amikacin, kanamycin, capreomycin (4 µg/mL), and ofloxacin; 100% and 95.3%, respectively, for capreomycin (10 µg/mL); and 85.7% and 100%, respectively, for moxifloxacin (0.5 µg/mL). The sensitivity and specificity values for the GenoType MTBDRsl test to detect fluoroquinolone and aminoglycoside/cyclic peptide resistance were 88.9% and 100%, respectively, for ofloxacin and 85.7% and 94.9%, respectively, for moxifloxacin (0.5 µg/mL). The accuracy of the GenoType MTBDRsl assay for kanamycin, capreomycin, ofloxacin, and moxifloxacin was lower than that of the BACTEC MGIT 960 SL DST. Conclusion: The BACTEC MGIT 960 SL DST kit and the GenoType MTBDRsl were successful in detecting second-line antituberculosis drug resistance. Preliminary results of the GenoType MTBDRsl are very valuable for early treatment decisions, but we still recommend additional BACTEC MGIT 960 SL DST kit usage in the routine evaluation of drug-resistant tuberculosis. PMID:29123441

  13. Experimental testing and modelling of a resistive type superconducting fault current limiter using MgB2 wire

    International Nuclear Information System (INIS)

    Smith, A C; Pei, X; Oliver, A; Husband, M; Rindfleisch, M

    2012-01-01

    A prototype resistive superconducting fault current limiter (SFCL) was developed using single-strand round magnesium diboride (MgB 2 ) wire. The MgB 2 wire was wound with an interleaved arrangement to minimize coil inductance and provide adequate inter-turn voltage withstand capability. The temperature profile from 30 to 40 K and frequency profile from 10 to 100 Hz at 25 K were tested and reported. The quench properties of the prototype coil were tested using a high current test circuit. The fault current was limited by the prototype coil within the first quarter-cycle. The prototype coil demonstrated reliable and repeatable current limiting properties and was able to withstand a potential peak current of 372 A for one second without any degradation of performance. A three-strand SFCL coil was investigated and demonstrated scaled-up current capacity. An analytical model to predict the behaviour of the prototype single-strand SFCL coil was developed using an adiabatic boundary condition on the outer surface of the wire. The predicted fault current using the analytical model showed very good correlation with the experimental test results. The analytical model and a finite element thermal model were used to predict the temperature rise of the wire during a fault. (paper)

  14. Evaluation of GenoType® MTBDRplus assay for rapid detection of drug susceptibility testing of multi-drug resistance tuberculosis in Northern India

    Directory of Open Access Journals (Sweden)

    Anand Kumar Maurya

    2013-01-01

    Full Text Available Background: The problem of multi-drug resistance tuberculosis (MDR-TB is growing in several hotspots throughout the world. Rapid and accurate diagnosis of MDR-TB is crucial to facilitate early treatment and to reduce its spread in the community. The aim of the present study was to evaluate the new, novel GenoType® MTBDRplus assay for rapid detection of drug susceptibility testing (DST of MDR-TB cases in Northern India. Materials and Methods: A total of 550 specimens were collected from highly suspected drug resistant from pulmonary and extra-pulmonary TB cases. All the specimens were processed by Ziehl- Neelsen staining, culture, differentiation by the GenoType® CM assay, first line DST using BacT/ALERT 3D system and GenoType® MTBDRplus assay. The concordance of the GenoType® MTBDRplus assay was calculated in comparison with conventional DST results. Results: Overall the sensitivity for detection of rifampicin, isoniazid and MDR-TB resistance by GenoType® MTBDRplus assay was 98.0%, 98.4% and 98.2% respectively. Out of 55 MDR-TB strains, 45 (81.8%, 52 (94.5% and 17 (30.9% strains showed mutation in rpoB, katG and inhA genes respectively (P < 0.05. The most prominent mutations in rpoB, katG and inhA genes were; 37 (67.3% in S531L, 52 (94.5% in S315T1 and 11 (20% in C15T regions respectively (P < 0.05. Conclusions: Our study demonstrated a high concordance between the GenoType® MTBDRplus assay resistance patterns and those were observed by conventional DST with good sensitivity, specificity with short turnaround times and to control new cases of MDR-TB in countries with a high prevalence of MDR-TB.

  15. The Higher the Insulin Resistance the Lower the Cardiac Output in Men with Type 1 Diabetes During the Maximal Exercise Test.

    Science.gov (United States)

    Niedzwiecki, Pawel; Naskret, Dariusz; Pilacinski, Stanislaw; Pempera, Maciej; Uruska, Aleksandra; Adamska, Anna; Zozulinska-Ziolkiewicz, Dorota

    2017-06-01

    The aim of this study was to assess the hemodynamic parameters analyzed in bioimpedance cardiography during maximal exercise in patients with type 1 diabetes differing in insulin resistance. The study group consisted of 40 men with type 1 diabetes. Tissue sensitivity to insulin was assessed on the basis of the glucose disposal rate (GDR) analyzed during hyperinsulinemic-euglycemic clamp. Patients were divided into groups with GDR insulin sensitivity) and GDR ≥4.5 mg/kg/min (G2 group-higher insulin sensitivity). During the exercise test, the heart rate, systolic volume, cardiac output, cardiac index were measured by the impedance meter (PhysioFlow). Compared with the G2 group, the G1 group had a lower cardiac output (CO): during exercise 8.6 (IQR 7.7-10.0) versus 12.8 (IQR 10.8-13.7) L/min; P insulin resistance is associated with cardiac hemodynamic parameters assessed during and after exercise. The higher the insulin resistance the lower the cardiac output during maximal exercise in men with type 1 diabetes.

  16. HIV Genotypic Resistance Testing

    Science.gov (United States)

    ... Disorders Fibromyalgia Food and Waterborne Illness Fungal Infections Gout Graves Disease Guillain-Barré Syndrome Hashimoto Thyroiditis Heart ... antiretroviral therapy (ART) drugs. The test analyzes the genes of the HIV strain infecting the person to ...

  17. Susceptibility Testing by Polymerase Chain Reaction DNA Quantitation: A Method to Measure Drug Resistance of Human Immunodeficiency Virus Type 1 Isolates

    Science.gov (United States)

    Eron, Joseph J.; Gorczyca, Paul; Kaplan, Joan C.; D'Aquila, Richard T.

    1992-04-01

    Polymerase chain reaction (PCR) DNA quantitation (PDQ) susceptibility testing rapidly and directly measures nucleoside sensitivity of human immunodeficiency virus type 1 (HIV-1) isolates. PCR is used to quantitate the amount of HIV-1 DNA synthesized after in vitro infection of peripheral blood mononuclear cells. The relative amounts of HIV-1 DNA in cell lysates from cultures maintained at different drug concentrations reflect drug inhibition of virus replication. The results of PDQ susceptibility testing of 2- or 3-day cultures are supported by assays measuring HIV-1 p24 antigen production in supernatants of 7- or 10-day cultures. DNA sequence analyses to identify mutations in the reverse transcriptase gene that cause resistance to 3'-azido-3'-deoxythymidine also support the PDQ results. With the PDQ method, both infectivity titration and susceptibility testing can be performed on supernatants from primary cultures of peripheral blood mononuclear cells. PDQ susceptibility testing should facilitate epidemiologic studies of the clinical significance of drug-resistant HIV-1 isolates.

  18. Helicobacter pylori from Peptic Ulcer Patients in Uganda Is Highly Resistant to Clarithromycin and Fluoroquinolones: Results of the GenoType HelicoDR Test Directly Applied on Stool

    Directory of Open Access Journals (Sweden)

    Denish Calmax Angol

    2017-01-01

    Full Text Available Background. Around 70–90% of peptic ulcer disease (PUD is due to Helicobacter pylori and requires treatment with antimicrobials to which these bacteria are susceptible. Common H. pylori diagnostic tests do not provide drug susceptibility data. Using the GenoType HelicoDR PCR test designed for gastric biopsies for simultaneous detection of H. pylori and its resistance to clarithromycin (CLA/fluoroquinolones (FLQ, we present evidence for stool as an optional test specimen and also provide data on prevalence of H. pylori resistance to CLA and FLQ in Uganda. Methods. Stool from 142 symptomatic PUD patients at three hospitals in Kampala was screened for H. pylori using a rapid antigen test. The GenoType HelicoDR test was run on all H. pylori antigen positives to determine PCR positivity and resistance to CLA/FLQ. Results. Thirty-one samples (22% were H. pylori antigen positive, and 21 (68% of these were H. pylori PCR positive. Six of the 21 (29% were resistant to CLA and eight to FLQ (42%, while two gave invalid FLQ resistance results. Conclusion. Stool is a possible specimen for the GenoType HelicoDR test for rapid detection of H. pylori and drug resistance. In Uganda, Helicobacter pylori is highly resistant to CLA and FLQ.

  19. HIV resistance testing and detected drug resistance in Europe

    DEFF Research Database (Denmark)

    Schultze, Anna; Phillips, Andrew N; Paredes, Roger

    2015-01-01

    to Southern Europe. CONCLUSIONS: Despite a concurrent decline in virological failure and testing, drug resistance was commonly detected. This suggests a selective approach to resistance testing. The regional differences identified indicate that policy aiming to minimize the emergence of resistance......OBJECTIVES: To describe regional differences and trends in resistance testing among individuals experiencing virological failure and the prevalence of detected resistance among those individuals who had a genotypic resistance test done following virological failure. DESIGN: Multinational cohort...... study. METHODS: Individuals in EuroSIDA with virological failure (>1 RNA measurement >500 on ART after >6 months on ART) after 1997 were included. Adjusted odds ratios (aORs) for resistance testing following virological failure and aORs for the detection of resistance among those who had a test were...

  20. Short communication prevalence of susceptibility to etravirine by genotype and phenotype in samples received for routine HIV type 1 resistance testing in the United States.

    Science.gov (United States)

    Picchio, Gaston; Vingerhoets, Johan; Tambuyzer, Lotke; Coakley, Eoin; Haddad, Mojgan; Witek, James

    2011-12-01

    Abstract The prevalence of susceptibility to etravirine was investigated among clinical samples submitted for routine clinical testing in the United States using two separate weighted genotypic scoring systems. The presence of etravirine mutations and susceptibility to etravirine by phenotype of clinical samples from HIV-1-infected patients, submitted to Monogram Biosciences for routine resistance testing between June 2008 and June 2009, were analyzed. Susceptibility by genotype was determined using the Monogram and Tibotec etravirine-weighted genotypic scoring systems, with scores of ≤3 and ≤2, respectively, indicating full susceptibility. Susceptibility by phenotype was determined using the PhenoSense HIV assay, with lower and higher clinical cut-offs of 2.9 and 10, respectively. The frequency of individual etravirine mutations and the impact of the K103N mutation on susceptibility to etravirine by genotype were also determined. Among the 5482 samples with ≥1 defined nonnucleoside reverse transcriptase inhibitor (NNRTI) mutations associated with resistance, 67% were classed as susceptible to etravirine by genotype by both scoring systems. Susceptibility to etravirine by phenotype was higher (76%). The proportion of first-generation NNRTI-resistant samples with (n=3598) and without (n=1884) K103N with susceptibility to etravirine by genotype was 77% and 49%, respectively. Among samples susceptible to first-generation NNRTIs (n=9458), >99% of samples were susceptible to etravirine by phenotype (FC <2.9); the remaining samples had FC ≥2.9-10. In summary, among samples submitted for routine clinical testing in the United States, a high proportion of samples with first-generation NNRTI resistance was susceptible to etravirine by genotype and phenotype. A higher proportion of NNRTI-resistant samples with K103N than without was susceptible to etravirine.

  1. Genetics Home Reference: type A insulin resistance syndrome

    Science.gov (United States)

    ... Conditions Type A insulin resistance syndrome Type A insulin resistance syndrome Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Type A insulin resistance syndrome is a rare disorder characterized by severe ...

  2. Puncture resistance of Type B transport systems

    International Nuclear Information System (INIS)

    Rack, H.J.; Cheresh, M.C.

    1980-01-01

    This report describes a recent attempt to develop a test method for use in screening materials and for evaluating the effects of certain parameters, for example section stiffness, on container penetration resistance. In addition, it illustrates the application of this procedure to the selection of a sheet steel for a transuranic waste (TRUPACT) container. The test consists of penetrating a specimen, normally 0.6 m square, with a punch (tup) attached to a falling weight and recording and analyzing the force-time history to determine the energy absorption during the impact event. The test as developed simulates certain aspects of the 10CFR71 drop test in order to provide a means of comparing, for example, the penetrating resistance of various steels, this resistance being defined as the energy required to initiate fracture in the specimen. In summary, this examination suggests that it should be possible to develop a laboratory test to rank and select materials for maximum puncture resistance. Although the initial results appear promising, more effort will be required before this procedure can be routinely applied to examining the various factors which control the puncture resistance of these materials. These results do, nonetheless, show that high-strength, low-alloy steels do offer significant advantages over mild steel for container penetration protection. Indeed, one of these steels, NAX-80, is presently considered as a prime candidate for the TRUPACT container being developed at Sandia National Laboratories

  3. LEPTIN RESISTANCE AND TYPE 2 DIABETES

    Directory of Open Access Journals (Sweden)

    O. M. Oleshchuk

    2017-07-01

    Full Text Available Leptin is one of adipocyte-secreted hormones. It signals to the brain and other tissues about the status of body energy reserves. Circulating leptin levels are directly proportional to the amount of the body fat. Leptin concentration increases when surfeit and decreases during fasting. Obese patients are hyperleptinemic compared with thin persons and they are tolerant to the central hypothalamic effects of leptin. The reduced sensitivity toward exogenous and endogenous leptin is commonly referred to as leptin resistance. Alterations in the signaling of the long isoform of the leptin receptor play the crucial role in leptin resistance. Surfeit may induce leptin resistance and other metabolic sequelae of obesity. Leptin insensitivity and insulin resistance play a major role in the development of type 2 diabetes. Metformin remains the preferred first-line pharmacologic agent for the treatment of type 2 diabetes. It reduces hepatic glucose production, increases glucose uptake in peripheral tissue and can lead to weight loss. Metformin decreases both insulin and leptin concentration, restores the sensitivity to these hormones. But some studies have shown poor relationship between metformin action and leptin level. And the mechanism of metformin action on leptin resistance remains unclear. Thus, these issues should be studied as well as polymorphisms in genes encoding metformin action.

  4. RIA type tests in ACPR

    International Nuclear Information System (INIS)

    Preda, Marin; Stefan, Violeta; Ancuta, Mirela; Negut, Gheorghe

    2008-01-01

    For a better NPP operation fuel behavior in accidental conditions (LOCA) is of great interest. Irradiation tests in ACPR can give interesting data on the CANDU fuel behavior in such kind of accidents. These data can be used for simulation, calibration and validation of fuel computer codes. The tests were accomplished in the TRIGA Annular Core Pulse Reactor (ACPR). Reactivity insertion accidents are not specific for the CANDU reactors but this type of test can contribute to a better understanding of CANDU type fuel behavior during various conditions.The tests were accomplished in the ambient pressure and temperature with fresh fuel probes. These tests gave similar results on the clad-fuel, and clad-coolant interactions which occur in LOCA accidents. The tests will be continued with instrumentation improvements what will give better statistics and information on fuel behavior in accident conditions. The structure of the paper is the following: - 1. Introduction; - 2. Irradiation device description; - 2.1. Capsule main parameters; - 2.1.1. Initial conditions; - 2.1.2. Test conditions; - 3. Tests objectives; - 4. Test of fuel; - 5. Results; - 5.1. Temperature effects; - 5.2. Pressure effects; - 6. Conclusion

  5. High Temperature Performance Evaluation of As-serviced 25Cr35Ni Type Heat-resistant Steel Based on Stress Relaxation Tests

    Directory of Open Access Journals (Sweden)

    XU Jun

    2017-08-01

    Full Text Available Based on an as-serviced 25Cr35Ni type steel, the high temperature property evaluation using stress relaxation test(SRT method and residual life prediction were studied. The results show that creep rupture property decreases because of the formation of network carbides along grain boundaries and coarsening of secondary carbides in the austenitic matrix. Based on the relationship of stress relaxation strain rate curves obtained at different temperatures, and the extrapolation equation of stress relaxation rate-rupture time, it is capable to perform residual life evaluation by combining SRT data and a small amount of creep rupture test(CRT. Good agreement is observed for predicting results performed by current method and traditional method.

  6. Metabolic consequences of resistive-type exercise

    Science.gov (United States)

    Dudley, G. A.

    1988-01-01

    This brief review concerns acute and chronic metabolic responses to resistive-type exercise (RTE) (i.e., Olympic/power weight lifting and bodybuilding). Performance of RTE presents power output substantially greater (10-15-fold) than that evident with endurance-type exercise. Accordingly, RTE relies heavily on the anaerobic enzyme machinery of skeletal muscle for energy supply, with alterations in the rate of aerobic metabolism being modest. Hydrolysis of high energy phosphate compounds (PC, ATP), glycogenolysis, and glycolysis are evident during an acute bout of RTE as indicated by metabolic markers in mixed fiber type skeletal muscle samples. The type of RTE probably influences the magnitude of these responses since the increase in blood lactate is much greater during a typical "bodybuilding" than "power lifting" session. The influence of RTE training on acute metabolic responses to RTE has received little attention. An individual's inherent metabolic characteristics are apparently sufficient to meet the energy demands of RTE as training of this type does not increase VO2max or substantially alter the content of marker enzymes in mixed fiber type skeletal muscle. Analyses of pools of fast- vs slow-twitch fibers, however, indicate that RTE-induced changes may be fiber type specific. Future studies should better delineate the metabolic responses to RTE and determine whether these are related to the enhanced performance associated with such training.

  7. Staphylococcus aureus phage types and their correlation to antibiotic resistance

    Directory of Open Access Journals (Sweden)

    Mehndiratta P

    2010-10-01

    Full Text Available Context: Staphylococcus aureus is one of the most devastating human pathogen. The organism has a differential ability to spread and cause outbreak of infections. Characterization of these strains is important to control the spread of infection in the hospitals as well as in the community. Aim: To identify the currently existing phage groups of Staphylococcus aureus, their prevalence and resistance to antibiotics. Materials and Methods: Study was undertaken on 252 Staphylococcus aureus strains isolated from clinical samples. Strains were phage typed and their resistance to antibiotics was determined following standard microbiological procedures. Statistical Analysis: Chi square test was used to compare the antibiotic susceptibility between methicillin resistant Staph. aureus (MRSA and methicillin sensitive S. aureus (MSSA strains. Results: Prevalence of MRSA and MSSA strains was found to be 29.36% and 70.65% respectively. Of these 17.56% of MRSA and 40.44% of MSSA strains were community acquired. All the MSSA strains belonging to phage type 81 from the community were sensitive to all the antibiotics tested including clindamycin and were resistant to penicillin. Forty five percent strains of phage group III and 39% of non-typable MRSA strains from the hospital were resistant to multiple antibiotics. Conclusion: The study revealed that predominant phage group amongst MRSA strains was phage group III and amongst MSSA from the community was phage group NA (phage type 81. MSSA strains isolated from the community differed significantly from hospital strains in their phage type and antibiotic susceptibility. A good correlation was observed between community acquired strains of phage type 81 and sensitivity to gentamycin and clindamycin.

  8. Performance test of wet type decontamination device

    International Nuclear Information System (INIS)

    Lee, E. P.; Kim, E. G.; Min, D. K.; Jun, Y. B.; Lee, H. K.; Seu, H. S.; Kwon, H. M.; Hong, K.P.

    2003-01-01

    The intervention area located at rear hot cell can be contaminated by hot cell maintenance work. For effective decontamination of the intervention floor a wet type decontamination device was developed. The device was assembled with a brush rotating part, a washing liquid supplying part, an intake part for recovering contaminated liquid and a device moving cart part. The device was made of stainless steel for easy decontamination and corrosion resistance. The function test carried out at intervention area of the PIE facility showed good performance

  9. Frictional Resistance of Three Types of Ceramic Brackets

    Directory of Open Access Journals (Sweden)

    Claire L Williams

    2014-01-01

    Full Text Available Objectives: To investigate the static frictional resistance at the bracket/archwire interface in two recently introduced bracket systems and compare them to conventional ceramic and conventional metal bracket systems. Three variables were considered including the bracket system, archwire type and archwire angulation. Material and Methods: Four bracket systems were tested in vitro: Self ligating ceramic, ceramic with metal slot and module, conventional ceramic with module and conventional metal with module. A specially constructed jig and an Instron testing machine were used to measure the static frictional resistance for 0.014 inches round and 0.018 x 0.025 inches rectangular stainless steel wires at 0° and 7° angulations. Main outcome measures: static frictional force at the bracket/archwire interface; recorded and measured in units of force (Newtons. Results: Self ligating ceramic and metal slot ceramic bracket systems generated significantly less static frictional resistance than conventional ceramic bracket systems with the wire at both angulations (P < 0.05. Changing the wire from 0.014 round to 0.018 x 0.025 rectangular wire significantly increased frictional forces for metal slot ceramic and conventional metal bracket systems (P < 0.01. Increasing wire angulation significantly increased frictional resistance at the bracket/archwire interface for all four types of bracket systems tested (P < 0.001. Conclusions: Compared to conventional ceramic, self ligating ceramic and metal slot ceramic bracket systems should give improved clinical performance, matching that of conventional metal brackets.

  10. Corrosion resistance testing of high-boron-content stainless steels

    International Nuclear Information System (INIS)

    Petrman, I.; Safek, V.

    1994-01-01

    Boron steels, i.e. stainless steels with boron contents of 0.2 to 2.25 wt.%, are employed in nuclear engineering for the manufacture of baskets or wells in which radioactive fissile materials are stored, mostly spent nuclear fuel elements. The resistance of such steels to intergranular corrosion and uniform corrosion was examined in the Strauss solution and in boric acid; the dependence of the corrosion rate of the steels on their chemical composition was investigated, and their resistance was compared with that of AISI 304 type steel. Corrosion resistance tests in actual conditions of ''wet'' compact storage (demineralized water or a weak boric acid solution) gave evidence that boron steels undergo nearly no uniform corrosion and, as electrochemical measurements indicated, match standard corrosion-resistant steels. Corrosion resistance was confirmed to decrease slightly with increasing boron content and to increase somewhat with increasing molybdenum content. (Z.S.). 3 tabs., 4 figs., 7 refs

  11. H2S cracking resistance of type 420 stainless steel tubulars

    International Nuclear Information System (INIS)

    Klein, L.J.

    1984-01-01

    Type 420 stainless steel (13Cr) production tubing is being used successfully in deep sour gas wells in the Tuscaloosa Trend. Despite their reputation for poor H 2 S cracking resistance in laboratory tests, 12-13% Cr steels continue to perform well in sour environments. NACE Tensile Test and Shell bent beam test results indicate Type 420 is more resistant to H 2 S cracking than Type 410, but is not as resistant as carbon steel, at to 586-690 MPa (85-100 ksi) yield strength level. In addition to evaluating Type 420 stainless steel in the standard NACE Tensile and Shell bent beam tests, the effects on cracking tendency of chloride concentration, pH, and H 2 S gas concentration in the NACE Test solution were also examined. Type 420 appears to be more resistant to H 2 S cracking than is indicated by standard laboratory tests, at least in low H 2 S level sour environments

  12. Type 2 diabetes mellitus as a disorder of galanin resistance.

    Science.gov (United States)

    Fang, Penghua; Shi, Mingyi; Zhu, Yan; Bo, Ping; Zhang, Zhenwen

    2016-01-01

    The increasing prevalence of type 2 diabetes mellitus with its high morbidity and mortality becomes an important health problem. The multifactorial etiology of type 2 diabetes mellitus is relative to many gene and molecule alterations, and increased insulin resistance. Besides these, however, there are still other predisposing and risk factors accounting for type 2 diabetes mellitus not to be identified and recognized. Emerging evidence indicated that defects in galanin function played a crucial role in development of type 2 diabetes mellitus. Galanin homeostasis is tightly relative to insulin resistance and is regulated by blood glucose. Hyperglycemia, hyperinsulinism, enhanced plasma galanin levels and decreased galanin receptor activities are some of the characters of type 2 diabetes mellitus. The discrepancy between high insulin level and low glucose handling is named as insulin resistance. Similarly, the discrepancy between high galanin level and low glucose handling may be denominated as galanin resistance too. In this review, the characteristic milestones of type 2 diabetes mellitus were condensed as two analogical conceptual models, obesity-hyper-insulin-insulin resistance-type 2 diabetes mellitus and obesity-hyper-galanin-galanin resistance-type 2 diabetes mellitus. Both galanin resistance and insulin resistance are correlative with each other. Conceptualizing the etiology of type 2 diabetes mellitus as a disorder of galanin resistance may inspire a new concept to deepen our knowledge about pathogenesis of type 2 diabetes mellitus, eventually leading to novel preventive and therapeutic interventions for type 2 diabetes mellitus. Copyright © 2015 Elsevier Inc. All rights reserved.

  13. Type 2 Diabetes Risk Test

    Science.gov (United States)

    ... Rights Employment Discrimination Health Care Professionals Law Enforcement Driver's License For Lawyers Food & Fitness Home Food MyFoodAdvisor ... Fit Types of Activity Weight Loss Assess Your Lifestyle Getting Started Food Choices In My Community Home ...

  14. 77 FR 809 - Request for Proposals for Certification and Testing Expertise for the Ballistic Resistance of...

    Science.gov (United States)

    2012-01-06

    ... for Certification and Testing Expertise for the Ballistic Resistance of Personal Body Armor (2008... revising its Ballistic Resistance of Personal Body Armor (2008) Standard and corresponding certification... laboratories with experience in programs for similar types of ballistic-resistant personal protective equipment...

  15. Experimental Study of Tensile Test in Resistance Spot Welding Process

    Directory of Open Access Journals (Sweden)

    Lebbal Habib

    Full Text Available Abstract Resistance spot welding (RSW is a widely used joining process for fabricating sheet metal assemblies in automobile industry .In comparison with other welding processes the RSW is faster and easier for automation. This process involves electrical, thermal and mechanical interactions. Resistance spot welding primarily takes place by localized melting spot at the interface of the sheets followed by its quick solidification under sequential control of pressure water-cooled electrode and flow of required electric current for certain duration. In this work the tensile tests were studied, the results obtained show that the type material, the overlap length, the angle of the rolling direction and the thickness of the sheet have an influence in resistance spot welding process.

  16. Development of a Midscale Test for Flame Resistant Protection

    Science.gov (United States)

    2016-08-01

    Evaluation of Flame Resistant Clothing for Protection against Fire Simulations Using an Instrumented Manikin, which provides both radiant and convective heat...TEST METHODS FIRE RESISTANT MATERIALS TORCHES SIMULATION TEST EQUIPMENT FLAME RESISTANT CLOTHING PERFORMANCE(ENGINEERING... fabric during a fire , and even after the fire has been extinguished. The best known full scale transmitted heat flux test is the "ASTM F1930

  17. Statistical analysis of electrical resistivity as a tool for estimating cement type of 12-year-old concrete specimens

    NARCIS (Netherlands)

    Polder, R.B.; Morales-Napoles, O.; Pacheco, J.

    2012-01-01

    Statistical tests on values of concrete resistivity can be used as a fast tool for estimating the cement type of old concrete. Electrical resistivity of concrete is a material property that describes the electrical resistance of concrete in a unit cell. Influences of binder type, water-to-binder

  18. Coal Ash Corrosion Resistant Materials Testing

    Energy Technology Data Exchange (ETDEWEB)

    D. K. McDonald; P. L. Daniel; D. J. DeVault

    2007-12-31

    In April 1999, three identical superheater test sections were installed into the Niles Unit No.1 for the purpose of testing and ranking the coal ash corrosion resistance of candidate superheater alloys. The Niles boiler burns high sulfur coal (3% to 3.5%) that has a moderate alkali content (0.2% sodium equivalents), thus the constituents necessary for coal ash corrosion are present in the ash. The test sections were controlled to operate with an average surface metal temperature from approximately 1060 F to 1210 F which was within the temperature range over which coal ash corrosion occurs. Thus, this combination of aggressive environment and high temperature was appropriate for testing the performance of candidate corrosion-resistant tube materials. Analyses of the deposit and scale confirmed that aggressive alkali sulfate constituents were present at the metal surface and active in tube metal wastage. The test sections were constructed so that the response of twelve different candidate tube and/or coating materials could be studied. The plan was to remove and evaluate one of the three test sections at time intervals of 1 year, 3 years, and 5 years. This would permit an assessment of performance of the candidate materials as a function of time. Test Section A was removed in November 2001 after about 24 months of service at the desired steam temperature set point, with about 15.5 months of exposure at full temperature. A progress report, issued in October 2002, was written to document the performance of the candidate alloys in that test section. The evaluation described the condition of each tube sample after exposure. It involved a determination of the rate of wall thickness loss for these samples. In cases where there was more than one sample of a candidate material in the test section, an assessment was made of the performance of the alloy as a function of temperature. Test Sections B and C were examined during the November 2001 outage, and it was decided that

  19. Design of online testing system of material radiation resistance

    International Nuclear Information System (INIS)

    Wan Junsheng; He Shengping; Gao Xinjun

    2014-01-01

    The capability of radiation resistance is important for some material used in some specifically engineering fields. It is the same principal applied in all existing test system that compares the performance parameter after radiation to evaluate material radiation resistance. A kind of new technique on test system of material radiation resistance is put forward in this paper. Experimentation shows that the online test system for material radiation resistance works well and has an extending application outlook. (authors)

  20. 30 CFR 7.407 - Test for flame resistance of electric cables and cable splices.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test for flame resistance of electric cables... Electric Cables, Signaling Cables, and Cable Splice Kits § 7.407 Test for flame resistance of electric... material and 21/2 inches of conductor insulation. The type, amperage, voltage rating, and construction of...

  1. Retention of Prose Following Testing with Different Types of Tests.

    Science.gov (United States)

    Duchastel, Philippe C.

    1981-01-01

    Taking a test on a passage one has just studied is known to enhance later retention. This effect was influenced by the type of initial test used. It was evident in the case of the initial short-answer test, but not in the case of multiple choice and free recall tests. (Author/RD)

  2. 30 CFR 7.48 - Acid resistance test.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Acid resistance test. 7.48 Section 7.48 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.48 Acid resistance test. (a...

  3. Uncertainty Analysis of Resistance Tests in Ata Nutku Ship Model Testing Laboratory of Istanbul Technical University

    Directory of Open Access Journals (Sweden)

    Cihad DELEN

    2015-12-01

    Full Text Available In this study, some systematical resistance tests, where were performed in Ata Nutku Ship Model Testing Laboratory of Istanbul Technical University (ITU, have been included in order to determine the uncertainties. Experiments which are conducted in the framework of mathematical and physical rules for the solution of engineering problems, measurements, calculations include uncertainty. To question the reliability of the obtained values, the existing uncertainties should be expressed as quantities. The uncertainty of a measurement system is not known if the results do not carry a universal value. On the other hand, resistance is one of the most important parameters that should be considered in the process of ship design. Ship resistance during the design phase of a ship cannot be determined precisely and reliably due to the uncertainty resources in determining the resistance value that are taken into account. This case may cause negative effects to provide the required specifications in the latter design steps. The uncertainty arising from the resistance test has been estimated and compared for a displacement type ship and high speed marine vehicles according to ITTC 2002 and ITTC 2014 regulations which are related to the uncertainty analysis methods. Also, the advantages and disadvantages of both ITTC uncertainty analysis methods have been discussed.

  4. Lessons learned during Type A Packaging testing

    International Nuclear Information System (INIS)

    O'Brien, J.H.; Kelly, D.L.

    1995-11-01

    For the past 6 years, the US Department of Energy (DOE) Office of Facility Safety Analysis (EH-32) has contracted Westinghouse Hanford Company (WHC) to conduct compliance testing on DOE Type A packagings. The packagings are tested for compliance with the U.S. Department of Transportation (DOT) Specification 7A, general packaging, Type A requirements. The DOE has shared the Type A packaging information throughout the nuclear materials transportation community. During testing, there have been recurring areas of packaging design that resulted in testing delays and/or initial failure. The lessons learned during the testing are considered a valuable resource. DOE requested that WHC share this resource. By sharing what is and can be encountered during packaging testing, individuals will hopefully avoid past mistakes

  5. TESTING GARCH-X TYPE MODELS

    DEFF Research Database (Denmark)

    Pedersen, Rasmus Søndergaard; Rahbek, Anders

    2017-01-01

    We present novel theory for testing for reduction of GARCH-X type models with an exogenous (X) covariate to standard GARCH type models. To deal with the problems of potential nuisance parameters on the boundary of the parameter space as well as lack of identification under the null, we exploit...... a noticeable property of specific zero-entries in the inverse information of the GARCH-X type models. Specifically, we consider sequential testing based on two likelihood ratio tests and as demonstrated the structure of the inverse information implies that the proposed test neither depends on whether...... the nuisance parameters lie on the boundary of the parameter space, nor on lack of identification. Our general results on GARCH-X type models are applied to Gaussian based GARCH-X models, GARCH-X models with Student's t-distributed innovations as well as the integer-valued GARCH-X (PAR-X) models....

  6. Psychophysiological types of clinically healthy individuals with different levels of teeth resistance to caries

    Directory of Open Access Journals (Sweden)

    V.G. Khalturina

    2010-06-01

    Full Text Available The work is a result of the psychophysiological tests with the help of cutting examination and psychogeometrical tests for 76 healthy individuals ages 20,18±1,25 years, having different caries resistance. It is known that group of people with poor caries resistance has a conflict type of personality. There is a positive tendency to growth of anxiety level and reducing caries resistance. The article concludes that the prophylaxis of caries and its complications must contain methods of psychophysiological correction

  7. spa typing and antimicrobial resistance of Staphylococcus aureus from healthy humans, pigs and dogs in Tanzania.

    Science.gov (United States)

    Katakweba, Abdul Sekemani; Muhairwa, Amandus Pachificus; Espinosa-Gongora, Carmen; Guardabassi, Luca; Mtambo, Madundo M A; Olsen, John Elmerdahl

    2016-02-28

    Staphylococcus aureus is an opportunistic pathogen causing infections in humans and animals. Here we report for the first time the prevalence of nasal carriage, spa typing and antimicrobial resistance of S. aureus in a Tanzanian livestock community. Nasal swabs were taken from 100 humans, 100 pigs and 100 dogs in Morogoro Municipal. Each swab was enriched in Mueller Hinton broth with 6.5% NaCl and subcultured on chromogenic agar for S. aureus detection. Presumptive S. aureus colonies were confirmed to the species level by nuc PCR and analysed by spa typing. Antimicrobial susceptibility patterns were determined by disc diffusion method. S. aureus was isolated from 22% of humans, 4% of pigs and 11% of dogs. A total of 21 spa types were identified: 13, 7 and 1 in human, dogs, and pigs, respectively. Three spa types (t314, t223 and t084) were shared between humans and dogs. A novel spa type (t10779) was identified in an isolate recovered from a colonized human. Antimicrobials tested revealed resistance to ampicillin in all isolates, moderate resistances to other antimicrobials with tetracycline resistance being the most frequent. S. aureus carrier frequencies in dogs and humans were within the expected range and low in pigs. The S. aureus spa types circulating in the community were generally not shared by different hosts and majority of types belonged to known clones. Besides ampicillin resistance, moderate levels of antimicrobial resistance were observed irrespective of the host species from which the strains were isolated.

  8. Testing and Modeling of Machine Properties in Resistance Welding

    DEFF Research Database (Denmark)

    Wu, Pei

    The objective of this work has been to test and model the machine properties including the mechanical properties and the electrical properties in resistance welding. The results are used to simulate the welding process more accurately. The state of the art in testing and modeling machine properties...... as real projection welding tests, is easy to realize in industry, since tests may be performed in situ. In part II, an approach of characterizing the electrical properties of AC resistance welding machines is presented, involving testing and mathematical modelling of the weld current, the firing angle...... in resistance welding has been described based on a comprehensive literature study. The present thesis has been subdivided into two parts: Part I: Mechanical properties of resistance welding machines. Part II: Electrical properties of resistance welding machines. In part I, the electrode force in the squeeze...

  9. Antigenic variation and resistance to neutralization in poliovirus type 1.

    NARCIS (Netherlands)

    D.C. Diamond; B.A. Jameson; J. Bonin; M. Kohara; S. Abe; H. Itoh; T. Komatsu; M. Arita; S. Kuge; A. Nomoto; A.D.M.E. Osterhaus (Albert); R. Crainic; E. Wimmer

    1985-01-01

    textabstractMutations have been identified in variants of poliovirus, type 1 (Mahoney) on the basis of their resistance to neutralization by individual monoclonal antibodies. The phenotypes of these variants were defined in terms of antibody binding; the pattern of epitopes expressed or able to be

  10. Assessing Psychological Insulin Resistance in Type 2 Diabetes

    DEFF Research Database (Denmark)

    Holmes-Truscott, Elizabeth; Pouwer, F; Speight, Jane

    2017-01-01

    PURPOSE OF REVIEW: This study aims to examine the operationalisation of 'psychological insulin resistance' (PIR) among people with type 2 diabetes and to identify and critique relevant measures. RECENT FINDINGS: PIR has been operationalised as (1) the assessment of attitudes or beliefs about...

  11. HIV-1 resistance testing influences treatment decision-making

    Directory of Open Access Journals (Sweden)

    Ricardo Sobhie Diaz

    Full Text Available OBJECTIVE: To investigates how the use of HIV-1 resistance tests influences physician decision-making. METHODS: Ten experienced reference physicians from the Brazilian Network for Drug Resistance each received ten patients' case histories. The selected patients had experienced at least two virological failures. First, reference physicians were asked to empirically select a new regimen for each patient. Second, after genotype report (ViroSeq 2.6 was provided, and physicians were again asked to select a new regimen considering this additional information. Finally, they were asked to select a regimen after receiving a virtual phenotype result (vircoTYPE 3.9.00. RESULTS: In 79% of the cases, physicians changed their empirical choice of regimen after receiving the genotype report, resulting in an increase in the mean number of active drugs from 1.8 to 2.2 (p = 0.0003, while the average number of drugs/regimen remained at 4.0. After receipt of the virtual phenotype report, additional changes were made in 75% of the patient cases, resulting in an increase in the number of active drugs to 2.8 (p < 0.0001, while the average number of drugs/regimen remained at 4.0. After receipt of the genotype report, 48% of the changes were in NRTIs, 29% were in NNRTIs and 60% were in PIs; after consideration of the virtual phenotype, 61%, 10% and 49% of the changes, respectively, were in these categories of drugs. Fourteen percent of the physicians rated the genotype report as "extremely useful", whereas 34% rated the subsequent virtual phenotype report as "extremely useful" (p = 0.0003. CONCLUSIONS: Resistance testing has a significant impact on physicians' choices of antiretroviral salvage therapies, and it promotes the selection of more active drugs

  12. Typing of Methicillin resistant Staphylococcus aureus: A technical review

    Directory of Open Access Journals (Sweden)

    P L Mehndiratta

    2012-01-01

    Full Text Available Increasing prevalence of Methicillin-resistant Staphylococcus aureus (MRSA worldwide is a growing public health concern. MRSA typing is an essential component of an effective surveillance system to describe epidemiological trends and infection control strategies. Current challenges for MRSA typing are focused on selecting the most appropriate technique in terms of efficiency, reliability, ease of performance and cost involved. This review summarises the available information on application, potential and problems of various typing techniques in discriminating the strains and understanding the epidemiology of MRSA strains. The phenotypic methods in general are easier to perform, easier to interpret, cost effective and are widely available, however less discriminatory. The genotypic methods are expensive and technically demanding, however more discriminatory. Newer technologies involving sequencing of various genes are coming up as broadly applicable and high throughput typing systems. Still there is no consensus regarding the single best method for typing of MRSA strains. Phage typing is recommended as first line approach in epidemiological investigation of MRSA strains. PFGE remains the gold standard for characterisation of outbreak strains. DNA sequencing methods including MLST, spa typing, SCCmec typing and toxin gene profile typing are more practical methods for detecting evolutionary changes and transmission events. The choice of typing technique further depends on the purpose of the study, the facilities available and the utility of data generated to answer a desirable research question. A need for harmonisation of typing techniques by following standard protocols is emphasised to establish surveillance networks and facilitate global MRSA control.

  13. Testing fire resistant boom in waves and flames

    International Nuclear Information System (INIS)

    McCourt, J.; Buist, I.; Pratte, B.; Jamieson, W.; Mullin, J.

    1997-01-01

    A near full-scale screening test to evaluate the durability and ability of refractory-fabric fire resistant booms to contain oil during an in-situ burn without the environmental problems of burning crude oil or the cost of testing offshore, was developed. The boom was first flexed under tension for two hours, then deployed in a U-configuration in an outdoor wave tank. Propane gas was burned in the pocket of the boom to simulate the collection and burning phases of an in-situ burn. Finally, the boom was returned to the indoor wave flume for another two hours of wave action and then inspected for damage. Results indicated damage of the same type as suffered in previously conducted sea trials, although the extent of damage was less severe. These results led to recommendations for improvement of the test protocol which included: (1) increasing the heat flux to the boom, (2) improving the heat flux measurement, (3) increasing the tension in the fire boom during flame testing, and (4) improving the characterization of the waves near the fire boom. 16 refs., 6 figs

  14. An Empirical Test of a Model of Resistance to Persuasion.

    Science.gov (United States)

    And Others; Burgoon, Michael

    1978-01-01

    Tests a model of resistance to persuasion based upon variables not considered by earlier congruity and inoculation models. Supports the prediction that the kind of critical response set induced and the target of the criticism are mediators of resistance to persuasion. (JMF)

  15. Insulin resistance and progression to type 1 diabetes in the European Nicotinamide Diabetes Intervention Trial (ENDIT)

    DEFF Research Database (Denmark)

    Bingley, Polly J; Mahon, Jeffrey L; Gale, Edwin A M

    2008-01-01

    OBJECTIVE: Insulin resistance can modulate progression to type 1 diabetes in individuals with ongoing islet autoimmunity. We wanted to see whether measures of insulin resistance improved risk assessment in islet cell antibody (ICA)-positive relatives when added to other immune and metabolic markers......-up was 4.21 years, and 105 individuals developed diabetes. Oral and intravenous glucose tolerance tests were performed at baseline; antibodies to GAD, IA-2, and insulin were determined by radioimmunoassay; and insulin resistance was estimated by homeostasis model assessment. Risk was assessed by Cox...... glucose tolerance test (P insulin resistance (HOMA2-IR) achieved only borderline significance (P = 0.06). HOMA2-IR was an independent determinant in participants with loss of FPIR (P = 0...

  16. Plasmids in Gram negatives: molecular typing of resistance plasmids.

    Science.gov (United States)

    Carattoli, Alessandra

    2011-12-01

    A plasmid is defined as a double stranded, circular DNA molecule capable of autonomous replication. By definition, plasmids do not carry genes essential for the growth of host cells under non-stressed conditions but they have systems which guarantee their autonomous replication also controlling the copy number and ensuring stable inheritance during cell division. Most of the plasmids confer positively selectable phenotypes by the presence of antimicrobial resistance genes. Plasmids evolve as an integral part of the bacterial genome, providing resistance genes that can be easily exchanged among bacteria of different origin and source by conjugation. A multidisciplinary approach is currently applied to study the acquisition and spread of antimicrobial resistance in clinically relevant bacterial pathogens and the established surveillance can be implemented by replicon typing of plasmids. Particular plasmid families are more frequently detected among Enterobacteriaceae and play a major role in the diffusion of specific resistance genes. For instance, IncFII, IncA/C, IncL/M, IncN and IncI1 plasmids carrying extended-spectrum beta-lactamase genes and acquired AmpC genes are currently considered to be "epidemic resistance plasmids", being worldwide detected in Enterobacteriaceae of different origin and sources. The recognition of successful plasmids is an essential first step to design intervention strategies preventing their spread. Copyright © 2011 Elsevier GmbH. All rights reserved.

  17. Sodium bicarbonate supplementation improves hypertrophy-type resistance exercise performance.

    Science.gov (United States)

    Carr, Benjamin M; Webster, Michael J; Boyd, Joseph C; Hudson, Geoffrey M; Scheett, Timothy P

    2013-03-01

    The aim of the present study was to examine the effects of sodium bicarbonate (NaHCO(3)) administration on lower-body, hypertrophy-type resistance exercise (HRE). Using a double-blind randomized counterbalanced design, 12 resistance-trained male participants (mean ± SD; age = 20.3 ± 2 years, mass = 88.3 ± 13.2 kg, height = 1.80 ± 0.07 m) ingested 0.3 g kg(-1) of NaHCO(3) or placebo 60 min before initiation of an HRE regimen. The protocol employed multiple exercises: squat, leg press, and knee extension, utilizing four sets each, with 10-12 repetition-maximum loads and short rest periods between sets. Exercise performance was determined by total repetitions generated during each exercise, total accumulated repetitions, and a performance test involving a fifth set of knee extensions to failure. Arterialized capillary blood was collected via fingertip puncture at four time points and analyzed for pH, [HCO(3)(-)], base excess (BE), and lactate [Lac(-)]. NaHCO(3) supplementation induced a significant alkaline state (pH: NaHCO(3): 7.49 ± 0.02, placebo: 7.42 ± 0.02, P < 0.05; [HCO(3)(-)]: NaHCO(3): 31.50 ± 2.59, placebo: 25.38 ± 1.78 mEq L(-1), P < 0.05; BE: NaHCO(3): 7.92 ± 2.57, placebo: 1.08 ± 2.11 mEq L(-1), P < 0.05). NaHCO(3) administration resulted in significantly more total repetitions than placebo (NaHCO(3): 139.8 ± 13.2, placebo: 134.4 ± 13.5), as well as significantly greater blood [Lac(-)] after the exercise protocol (NaHCO(3): 17.92 ± 2.08, placebo: 15.55 ± 2.50 mM, P < 0.05). These findings demonstrate ergogenic efficacy for NaHCO(3) during HRE and warrant further investigation into chronic training applications.

  18. Measurement by a cylinder test stand and tyre rolling resistance

    Directory of Open Access Journals (Sweden)

    A. Dávid

    2006-03-01

    Full Text Available Sometimes it is necessary to test how repair affects the properties of the car. These tests are carried out using a cylinder test stand. During the test the tyre is rolling between two cylinders of a small diameter. The question arises whether the rolling resistance of the tyre is the same as the rolling resistance when the wheel is rolling on the plane. If it is not the same what is the reliation between tyre resistances in these two cases? It is an important answer because the change of rolling resistance can affect consumption, the highest speed, engine power and other results of measurement. The paper gives the answer to these questions and describes the method of getting this information.

  19. Clostridium difficile Infection and Patient-Specific Antimicrobial Resistance Testing Reveals a High Metronidazole Resistance Rate.

    Science.gov (United States)

    Barkin, Jodie A; Sussman, Daniel A; Fifadara, Nimita; Barkin, Jamie S

    2017-04-01

    Clostridium difficile (CD) infection (CDI) causes marked morbidity and mortality, accounting for large healthcare expenditures annually. Current CDI treatment guidelines focus on clinical markers of patient severity to determine the preferred antibiotic regimen of metronidazole versus vancomycin. The antimicrobial resistance patterns for patients with CD are currently unknown. The aim of this study was to define the antimicrobial resistance patterns for CD. This study included all patients with stools sent for CD testing to a private laboratory (DRG Laboratory, Alpharetta, Georgia) in a 6-month period from across the USA. Patient data was de-identified, with only age, gender, and zip-code available per laboratory protocol. All samples underwent PCR testing followed by hybridization for CD toxin regions A and B. Only patients with CD-positive PCR were analyzed. Antimicrobial resistance testing using stool genomic DNA evaluated presence of imidazole- and vancomycin-resistant genes using multiplex PCR gene detection. Of 2743, 288 (10.5%) stool samples were positive for CD. Six were excluded per protocol. Of 282, 193 (69.4%) were women, and average age was 49.4 ± 18.7 years. Of 282, 62 were PCR positive for toxins A and B, 160 for toxin A positive alone, and 60 for toxin B positive alone. Antimicrobial resistance testing revealed 134/282 (47.5%) patients resistant to imidazole, 17 (6.1%) resistant to vancomycin, and 9 (3.2%) resistant to imidazole and vancomycin. CD-positive patients with presence of imidazole-resistant genes from stool DNA extract was a common phenomenon, while vancomycin resistance was uncommon. Similar to treatment of other infections, antimicrobial resistance testing should play a role in CDI clinical decision-making algorithms to enable more expedited and cost-effective delivery of patient care.

  20. Antimicrobial resistance and susceptibility testing of anaerobic bacteria.

    Science.gov (United States)

    Schuetz, Audrey N

    2014-09-01

    Infections due to anaerobic bacteria can be severe and life-threatening. Susceptibility testing of anaerobes is not frequently performed in laboratories, but such testing is important to direct appropriate therapy. Anaerobic resistance is increasing globally, and resistance trends vary by geographic region. An overview of a variety of susceptibility testing methods for anaerobes is provided, and the advantages and disadvantages of each method are reviewed. Specific clinical situations warranting anaerobic susceptibility testing are discussed. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  1. Effect of electrode type in the resistive switching behaviour of TiO2 thin films

    International Nuclear Information System (INIS)

    Hernández-Rodríguez, E; Zapata-Torres, M; Márquez-Herrera, A; Zaleta-Alejandre, E; Meléndez-Lira, M; Cruz, W de la

    2013-01-01

    The influence of the electrode/active layer on the electric-field-induced resistance-switching phenomena of TiO 2 -based metal-oxide-metal devices (MOM) is studied. TiO 2 active layers were fabricated by the reactive rf-sputtering technique and devices were made by sandwiching between several metal electrodes. Three different MOM devices were made, according with the junction type formed between the electrode and the TiO 2 active layer, those where Ohmic-Ohmic, Ohmic-Schottky and Schottky-Schottky. The junction type was tested by electrical I-V measurements. It was found that MOM devices made with the Ohmic-Ohmic combination did not show any resistive switching behaviour in contrast with devices made with Ohmic-Schottky and Schottky-Schottky combinations. From a detailed analysis of the I-V curves it was found that transport characteristics are Ohmic for the low-resistance state for all the contacts combinations of the MOM devices, whereas in the high-resistance state it depends on contact combinations and can be identified as Ohmic, Schottky and Poole-Frenkel type. These conduction mechanisms in the low- and high-resistance states suggest that formation and rupture of conducting filaments through the film oxide is the mechanism responsible for the resistance switching.

  2. Identification, Typing, Antifungal Resistance Profile, and Biofilm Formation of Candida albicans Isolates from Lebanese Hospital Patients

    Directory of Open Access Journals (Sweden)

    Ibrahim Bitar

    2014-01-01

    Full Text Available As leading opportunistic fungal pathogens identification and subtyping of Candida species are crucial in recognizing outbreaks of infection, recognizing particularly virulent strains, and detecting the emergence of drug resistant strains. In this study our objective was to compare identification of Candida albicans by the hospitals through the use of conventional versus identification based on the ITS (Internal Transcribed Spacer and to assess biofilm forming capabilities, drug resistance patterns and correlate these with MLST typing. ITS typing revealed a 21.2% hospital misidentification rate. Multidrug resistance to three drugs out of four tested was detected within 25% of the isolates raising concerns about the followed treatment regimens. Drug resistant strains as well as biofilm formers were phylogenetically related, with some isolates with significant biofilm forming capabilities being correlated to those that were multidrug resistant. Such isolates were grouped closely together in a neighbor-joining tree generated by MLST typing indicating phylogenetic relatedness, microevolution, or recurrent infection. In conclusion, this pilot study gives much needed insight concerning C. albicans isolates circulating in Lebanese hospitals and is the first study of its kind correlating biofilm formation, antifungal resistance, and evolutionary relatedness.

  3. Application of protein typing in molecular epidemiological investigation of nosocomial infection outbreak of aminoglycoside-resistant Pseudomonas aeruginosa.

    Science.gov (United States)

    Song, Min; Tang, Min; Ding, Yinghuan; Wu, Zecai; Xiang, Chengyu; Yang, Kui; Zhang, Zhang; Li, Baolin; Deng, Zhenghua; Liu, Jinbo

    2017-12-16

    Pseudomonas aeruginosan has emerged as an important pathogen elated to serious infections and nosocomial outbreaks worldwide. This study was conducted to understand the prevalence of aminoglycoside (AMG)-resistant P. aeruginosa in our hospital and to provide a scientific basis for control measures against nosocomial infections. Eighty-two strains of P. aeruginosa were isolated from clinical departments and divided into AMG-resistant strains and AMG-sensitive strains based on susceptibility test results. AMG-resistant strains were typed by drug resistance gene typing (DRGT) and protein typing. Five kinds of aminoglycoside-modifying enzyme (AME) genes were detected in the AMG-resistant group. AMG-resistant P. aeruginosa strains were classified into three types and six subtypes by DRGT. Four protein peaks, namely, 9900.02, 7600.04, 9101.25 and 10,372.87 Da, were significantly and differentially expressed between the two groups. AMG-resistant P. aeruginosa strains were also categorised into three types and six subtypes at the distance level of 10 by protein typing. AMG-resistant P. aeruginosa was cloned spread in our hospital; the timely implementation of nosocomial infection prevention and control strategies were needed in preventing outbreaks and epidemic of AMG-resistant P. aeruginosa. SELDI-TOF MS technology can be used for bacterial typing, which provides a new method of clinical epidemiological survey and nosocomial infection control.

  4. Test for bacterial resistance build-up against plasma treatment

    International Nuclear Information System (INIS)

    Zimmermann, J L; Shimizu, T; Li, Y-F; Morfill, G E; Schmidt, H-U; Isbary, G

    2012-01-01

    It is well known that the evolution of resistance of microorganisms to a range of different antibiotics presents a major problem in the control of infectious diseases. Accordingly, new bactericidal ‘agents’ are in great demand. Using a cold atmospheric pressure (CAP) plasma dispenser operated with ambient air, a more than five orders of magnitude inactivation or reduction of Methicillin-resistant Staphylococcus aureus (MRSA; resistant against a large number of the tested antibiotics) was obtained in less than 10 s. This makes CAP the most promising candidate for combating nosocomial (hospital-induced) infections. To test for the occurrence and development of bacterial resistance against such plasmas, experiments with Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Enterococcus mundtii) were performed. The aim was to determine quantitative limits for primary (naturally) or secondary (acquired) resistance against the plasma treatment. Our results show that E. coli and E. mundtii possess no primary resistance against the plasma treatment. By generating four generations of bacteria for every strain, where the survivors of the plasma treatment were used for the production of the next generation, a lower limit to secondary resistance was obtained. Our results indicate that CAP technology could contribute to the control of infections in hospitals, in outpatient care and in disaster situations, providing a new, fast and efficient broad-band disinfection technology that is not constrained by bacterial resistance mechanisms. (paper)

  5. An investigation of classification algorithms for predicting HIV drug resistance without genotype resistance testing

    CSIR Research Space (South Africa)

    Brandt, P

    2014-01-01

    Full Text Available is limited in low-resource settings. In this paper we investigate machine learning techniques for drug resistance prediction from routine treatment and laboratory data to help clinicians select patients for confirmatory genotype testing. The techniques...

  6. CRISPR Typing and Antibiotic Resistance Correlates with Polyphyletic Distribution in Human Isolates of Salmonella Kentucky.

    Science.gov (United States)

    Vosik, Dorothy; Tewari, Deepanker; Dettinger, Lisa; M'ikanatha, Nkuchia M; Shariat, Nikki W

    2018-02-01

    Although infrequently associated with reported salmonellosis in humans, Salmonella enterica, subsp. enterica serovar Kentucky (ser. Kentucky) is the most common nonclinical, nonhuman serovar reported in the United States. The goal of this study was to use Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-multi-virulence-locus sequence typing (MVLST) to subtype a collection of human clinical isolates of ser. Kentucky submitted to the Pennsylvania Department of Health and to determine the extent of antibiotic resistance in these strains. This analysis highlighted the polyphyletic nature of ser. Kentucky, and separated our isolates into two groups, Group I and Group II, which were equally represented in our collection. Furthermore, antimicrobial susceptibility testing on all isolates using a National Antimicrobial Resistance Monitoring System (NARMS) panel of antibiotics demonstrated that resistance profiles could be divided into two groups. Group I isolates were resistant to cephems and penicillins, whereas Group II isolates were resistant to quinolones, gentamicin, and sulfisoxazole. Collectively, 50% of isolates were resistant to three or more classes of antibiotics and 30% were resistant to five or more classes. The correlation of antibiotic resistance with the two different lineages may reflect adaptation within two distinct reservoirs of ser. Kentucky, with differential exposure to antimicrobials.

  7. Penetration tests to study the mechanical tribological properties of chisel type knife

    Science.gov (United States)

    Vlăduţoiu, L.; Chişiu, G.; Andrei, T.; Predescu, A.; Muraru, C.; Vlăduţ, V.

    2017-02-01

    The goal of this study was to analyze the behaviour of chisel knife type penetration in a certain type of sand. A series of penetration tests were carried out with chisel knife type, the answer to penetration depending mainly on nature, shape, size of knife and operating parameters such as speed, depth and working conditions. Tests were conducted in work conditions with wet sand and dry sand and determined force of resistance to penetration of the chisel knife type to a certain depth.

  8. State Waste Discharge Permit Application: Electric resistance tomography testing

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This permit application documentation is for a State Waste Discharge Permit issued in accordance with requirements of Washington Administrative Code 173-216. The activity being permitted is a technology test using electrical resistance tomography. The electrical resistance tomography technology was developed at Lawrence Livermore National Laboratory and has been used at other waste sites to track underground contamination plumes. The electrical resistance tomography technology measures soil electrical resistance between two electrodes. If a fluid contaminated with electrolytes is introduced into the soil, the soil resistance is expected to drop. By using an array of measurement electrodes in several boreholes, the areal extent of contamination can be estimated. At the Hanford Site, the purpose of the testing is to determine if the electrical resistance tomography technology can be used in the vicinity of large underground metal tanks without the metal tank interfering with the test. It is anticipated that the electrical resistance tomography technology will provide a method for accurately detecting leaks from the bottom of underground tanks, such as the Hanford Site single-shell tanks.

  9. State Waste Discharge Permit Application: Electric resistance tomography testing

    International Nuclear Information System (INIS)

    1994-04-01

    This permit application documentation is for a State Waste Discharge Permit issued in accordance with requirements of Washington Administrative Code 173-216. The activity being permitted is a technology test using electrical resistance tomography. The electrical resistance tomography technology was developed at Lawrence Livermore National Laboratory and has been used at other waste sites to track underground contamination plumes. The electrical resistance tomography technology measures soil electrical resistance between two electrodes. If a fluid contaminated with electrolytes is introduced into the soil, the soil resistance is expected to drop. By using an array of measurement electrodes in several boreholes, the areal extent of contamination can be estimated. At the Hanford Site, the purpose of the testing is to determine if the electrical resistance tomography technology can be used in the vicinity of large underground metal tanks without the metal tank interfering with the test. It is anticipated that the electrical resistance tomography technology will provide a method for accurately detecting leaks from the bottom of underground tanks, such as the Hanford Site single-shell tanks

  10. Molecular Typing and Macrolide Resistance of Syphilis Cases in Manitoba, Canada, From 2012 to 2016.

    Science.gov (United States)

    Shuel, Michelle; Hayden, Kristy; Kadkhoda, Kamran; Tsang, Raymond S W

    2018-04-01

    The province of Manitoba, Canada, with a population of approximately 1.3 million, has been experiencing increased incidence of syphilis cases since 2015. In this study, we examined the detection of Treponema pallidum DNA in 354 clinical samples from 2012 to 2016, and determined molecular types and mutations conferring resistance to azithromycin in the polymerase chain reaction (PCR)-positive samples. T. pallidum DNA detection was done by PCR amplification of tpp47, bmp, and polA genes. Syphilis serology results were reviewed for the PCR-positive cases. Molecular typing of syphilis strains was done by analysis of the T, pallidum arp, tpr, and tp0548 gene targets as well as partial sequencing of the 23S rRNA gene for azithromycin resistance. Of the 354 samples tested, 74 individual cases were PCR positive. A result from the treponemal antibody chemiluminescent microparticle immunoassay test was positive in 72 of these cases and that from the Venereal Disease Research Laboratory testing was positive in 66. Mutations conferring resistance to azithromycin were found in all 74 PCR-positive samples. Molecular typing was completed on 57 PCR-positive samples, and 12 molecular types were identified with 14d/g found in 63.2%. Increased strain diversity was observed with 8 molecular types detected in 2016, whereas only 2 to 3 types were found in 2012 to 2014. A patient with 2 episodes of infection 9 months apart caused by different molecular strain types was also identified. The finding of an increase in genetic diversity in the strains in this study and an increase in macrolide resistance compared with previous Canadian reports highlighted the need for continued surveillance including strain characterization.

  11. The resistivity imaging application in groundwater exploration: resistivity value and soil type

    International Nuclear Information System (INIS)

    Mohd Khardzir Husain

    2006-01-01

    Malaysia is rich in water resources. Water development has fueled socio-economic development of the country during the past decades. Dams and thousands of kilometers of pipes and canals divert water from the rivers to sustain domestic, industrial and agricultural needs. Lately, the water situation for the country has changed from one of relative abundance to one of relative scarcity. The population growth and the expansion in urbanization, industrialization and irrigated agriculture are imposing rapidly growing demands and pressure on the water resources, besides contributing to the rising water pollution. Surface water resource, the traditional source of water supply in the past, has become inadequate in some areas. The problem becomes more acute in areas where surface water is affected by the increasing pollution from industrial and agricultural waste and where changes in land have adversely affected the quantity and quality of surface water supply. The development of groundwater as a source of water supply or as an alternative source is therefore a timely outlook. Lack in groundwater development will becoming disasters to country. Electrical resistivity had been used in groundwater exploration to get an accuracy result in a short time. This method measures the apparent resistivity of the subsurface, including effects of any or all of the following: soil type, bedrock fractures, contaminants and ground water. Variations in electrical resistivity may indicate changes in composition, layer thickness or contaminant levels. The resistivity values obtained from various groundwater exploration and experimental sites shows that the value differs also in related to the soil type. (Author)

  12. Testing and Modeling of Contact Problems in Resistance Welding

    DEFF Research Database (Denmark)

    Song, Quanfeng

    together two or three cylindrical parts as well as disc-ring pairs of dissimilar metals. The tests have demonstrated the effectiveness of the model. A theoretical and experimental study is performed on the contact resistance aiming at a more reliable model for numerical simulation of resistance welding......As a part of the efforts towards a professional and reliable numerical tool for resistance welding engineers, this Ph.D. project is dedicated to refining the numerical models related to the interface behavior. An FE algorithm for the contact problems in resistance welding has been developed...... for the formulation, and the interfaces are treated in a symmetric pattern. The frictional sliding contact is also solved employing the constant friction model. The algorithm is incorporated into the finite element code. Verification is carried out in some numerical tests as well as experiments such as upsetting...

  13. In vitro testing of daptomycin plus rifampin againstmethicillin-resistant Staphylococcus aureus resistant to rifampin

    International Nuclear Information System (INIS)

    Khaswneh, Faisal A.; Ashcraft, Deborah S.; Pankey, George A.

    2008-01-01

    Objective was to test for synergy between daptomycin (DAP) and rifampin(RIF) against RIF-resistant methicillin-resistant Staphylococcus aureus(MRSA) isolates. Synergy testing using time-kill assay (TKA) was performed on6 clinically and genetically unique RIF-resistant MRSA isolates. The isolateswere identified out of 489 (1.2%) samples collected during April 2003 toAugust 2006, from patients at the Ochsner Medical Center in New Orleans,Louisiana, United States of America. Synergy testing of DAP plus RIF by TKAshowed that 5 isolates were different, but one isolate was antagonistic. Ourin-vitro study failed to demonstrate synergy between DAP plus RIF, againstour RIF-resistant MRSA isolates. Clinical failure of this combination shouldprompt the clinician to consider antagonism as one of the potential causes.(author)

  14. [Molecular typing characterization of food-borne methicillin-resistant Staphylococcus aureus in China].

    Science.gov (United States)

    Bai, Y; Wang, W; Yan, L; Yang, S R; Yan, S F; Dong, Y P; Zhao, B C; Zhao, Y Y; Xu, J; Hu, Y J; Li, F Q

    2018-04-06

    Objective: To analyses the antimicrobial resistance and molecular characterization of 21 MRSA isolates cultured from retail foods from different provinces in China, and evaluate the molecular typing methods. Methods: Twenty-one MRSA isolates were obtained from national foodborne pathogen surveillance network in 2012 (Chinese salad, n= 3; milk, n= 1; cake, n= 2; rice, n= 1; cold noodle, n= 1; spiced beef, n= 1; dumpling, n= 1; packed meal, n= 1; salad, n= 1; raw pork, n= 9). The antimicrobial resistance of 21 strains to 12 antimicrobial agents was tested by broth dilution method. Polymerase chain reaction (PCR) and DNA sequencing were performed to obtain the genetic types of MLST (ST) and spa typing. The clonal complex (CC) was assigned by eBURST soft and the MLVA type (MT) and MLVA complex (MC) were identified via the database of the MLVA website (http://www.mlva.net). Sma I pulsed-field gel electrophoresis ( Sma Ⅰ-PFGE) was also carried out to obtain the PFGE patterns of 21 strains. The genetic diversity and discriminatory power of typing were calculated by the Simpson's index of diversity (diversity index, DI) to find out the best genotyping method for MRSA. Results: All MRSA isolates showed multi-drug resistance(MDR), and were resistant to oxacillin, benzylpenicillin, clindamycin and erythromycin, and 71.4% (15/21), 47.6% (10/21), 42.9% (9/21) and 28.6% (6/21) of the MRSA isolates were resistant to tetracycline, ciprofloxacin, trimethoprim/sulfamethoxazole and gentamicin, respectively. Moreover, one strain was found to be resistant to all three antimicrobials of levofloxacin, moxifloxacin and rifampicin. Great diversity was found in these food-associated MRSA (6 STs, 7 spa types, and 9 MTs). PFGE patterns were more diverse than those of other three molecular typing methods (19 pulse types). The index of diversity (DI) of PFGE, MLVA, spa typing and MLST was 0.99, 0.80, 0.73, and 0.61, respectively. Among the MRSA isolates, CC9-ST9-t899-MT929-MC2236 (PFGE

  15. Investigation of Concrete Electrical Resistivity As a Performance Based Test

    OpenAIRE

    Malakooti, Amir

    2017-01-01

    The purpose of this research project was to identify the extent that concrete resistivity measurements (bulk and/or surface) can be used as a performance based lab test to improve the quality of concrete in Utah bridge decks. By allowing UDOT to specify a required resistivity, concrete bridge deck quality will increase and future maintenance costs will decrease. This research consisted of two phases: the field phase and the lab phase. In the field phase, concrete samples were gathered from...

  16. Characterization of methicillin-resistant Staphylococcus aureus Sequence Type 398

    DEFF Research Database (Denmark)

    Christiansen, Mette Theilgaard

    Staphylococcus aureus is an opportunistic pathogen that colonizes the nares and skin surfaces of several animal species, including man. S. aureus can cause a wide variety of infections ranging from superficial soft tissue and skin infections to severe and deadly systemic infections. Traditionally S....... aureus and methicillin-resistant Staphylococcus aureus (MRSA) have been associated with hospitals, but during the past decades MRSA has emerged in the community and now a new branch of MRSA has been found in association with livestock (LA-MRSA). A specific lineage (multilocus sequence type 398 (ST398...

  17. Obesity, insulin resistance, and type 1 diabetes mellitus.

    Science.gov (United States)

    Polsky, Sarit; Ellis, Samuel L

    2015-08-01

    To summarize recent studies about obesity, insulin resistance, and type 1 diabetes mellitus (T1DM). Overweight and obesity continue to be prevalent among individuals with T1DM. Obesity rates appear to have reached a plateau among children with T1DM in some parts of the world. The risk for development of T1DM is increased by obesity and may occur at an earlier age among obese individuals with a predisposition. Obesity increases the risk for comorbidities among individuals with T1DM, especially metabolic syndrome, and microvascular and macrovascular diseases. Metformin, glucagon-like peptide-1 agonist therapy, sodium glucose cotransporter-2 inhibitor therapy, and bariatric surgery may be beneficial therapies for glucose control, comorbidity management, and obesity among adults with T1DM. Insulin resistance may be improved among obese individuals with T1DM by biguanides (metformin) and glucagon-like peptide-1 agonists (exenatide). We review the last 18 months of literature on obesity, insulin resistance, and T1DM to highlight new epidemiologic results and treatments.

  18. The Effect of Resistance Training on Cardio-Metabolic Factors in Males with Type 2 Diabetes

    Directory of Open Access Journals (Sweden)

    Ghalavand

    2014-10-01

    Full Text Available Background Diabetes is one of the most important metabolic diseases in the world and exercise is a common advice to manage diabetes and reduce its complications. Objectives The aim of this study was to investigate the effect of resistance training on blood glucose, blood pressure and resting heart rate in males with type 2 diabetes. Materials and Methods In this semi-experimental study, 20 males with type 2 diabetes with mean age of 46 ± 3.4 years old who met the inclusion criteria were selected. The participants were randomly assigned into resistance training (n = 10 and control (n = 10 groups. Resistance exercise training program was performed for eight weeks, three sessions per week. Cardiovascular and biochemical parameters were measured before and after the intervention. To analyze the measured parameters changes t-test was used at P ≤ 0.05 significance level. Results After eight weeks, a significant decrease in fasting blood sugar (P = 0.002, glycosylated hemoglobin (P = 0.025 and systolic blood pressure (P = 0.022 was observed in the resistance group. In addition, there was a significant difference in blood sugar (P = 0.003 and glycosylated hemoglobin (P = 0.031 between the two groups. Conclusions Findings of this study confirmed the positive influence of resistance training to control blood glucose and blood pressure in males with type 2 diabetes.

  19. Typing of vancomycin-resistant enterococci from Danish hospitals

    DEFF Research Database (Denmark)

    Lester, C H; Olsen, S S; Schønheyder, Henrik Carl

    2009-01-01

    locus sequence typing (MLST) was performed on the vancomycin-resistant E. faecium isolates. Results: The collection consisted of 45 E. faecium and 16 E. faecalis isolates which originated from 12 different hospitals. Thirty three of 45 E. faecium isolates were vanA positive and the remaining 12 isolates...... were vanB positive. All but one of the E. faecalis isolates contained the vanB gene (n = 15) and the remaining isolate contained the vanA gene. MLST of the 45 E. faecium isolates revealed 10 different sequence types (ST). The STs were ST18 (n = 21), ST203 (n = 8), ST78 (n = 3), ST192 (n = 3), ST412 (n...

  20. New surface layers with low rolling resistance tested in Denmark

    DEFF Research Database (Denmark)

    Pettinari, Matteo; Schmidt, Bjarne; Jensen, Bjarne Bo

    2014-01-01

    Rolling Resistance coefficient that could improve energy efficiency of the roads. In particular, two new types of Split Mastic Asphalt (SMA) were developed and compared to a reference one; both mixtures have a relatively small maximum grain-size, 6 mm and 8 mm, respectively. Surface measurements...

  1. Tests on thirteen navy type model propellers

    Science.gov (United States)

    Durand, W F

    1927-01-01

    The tests on these model propellers were undertaken for the purpose of determining the performance coefficients and characteristics for certain selected series of propellers of form and type as commonly used in recent navy designs. The first series includes seven propellers of pitch ratio varying by 0.10 to 1.10, the area, form of blade, thickness, etc., representing an arbitrary standard propeller which had shown good results. The second series covers changes in thickness of blade section, other things equal, and the third series, changes in blade area, other things equal. These models are all of 36-inch diameter. Propellers A to G form the series on pitch ratio, C, N. I. J the series on thickness of section, and K, M, C, L the series on area. (author)

  2. Influence of bitumen type on cracking resistance of asphalt mixtures used in pavement overlays

    Science.gov (United States)

    Jaskula, P.; Szydlowski, C.; Stienss, M.

    2018-05-01

    Cracking is one of the predominant distresses occurring in flexible pavements, especially in old pavements that were rehabilitated with an asphalt overlay. In such cases asphalt mixtures should be designed to ensure high resistance to reflective cracking because new asphalt layers are exposed to existing cracks of the old pavement. The nature of these cracks can be various (transverse, longitudinal as well as crazy cracking). One factor that minimizes this type of distress is the proper mix design process, which should involve selection of specific bitumen binder and mineral mix gradation. However, still there is no universally adopted laboratory test method that would allow to clearly assess resistance of asphalt mixtures to reflective cracking. This paper describes the usage of one of the devices developed to test asphalt mixtures in terms of such distress – Texas Overlay Tester. For this test, samples prepared in laboratory conditions (i.e. compacted with the use of Superpave Gyratory Compactor) as well as obtained in the field (by core drilling) can be used. The results are obtained not only quickly and easily, but also with sufficient repeatability. The described method characterizes both crack initiation and crack propagation properties of asphalt mixtures. In this work one type of mineral mixture was tested with 4 different types of bitumen (one neat bitumen, two ordinary polymer-modified and one polymer-modified with high polymer content). For selected cases extra additives (rubber and loose fibres) were also tested. In total, six asphalt mixtures were tested. A ranking of the used binders was created on the basis of the results in order to conclude which bitumen would ensure the best performance characteristics in terms of reflective cracking. The results have clearly shown that deliberate choice of the binder used in the asphalt mixture for the overlay will significantly improve its reflective cracking resistance or even fatigue resistance.

  3. IP and resistivity survey at the INEL cold test pit

    International Nuclear Information System (INIS)

    Frangos, W.

    1997-01-01

    Induced polarization (IP) is a technique for detection of diffuse occurrences of metallic material. The Idaho National Laboratory (INEL) Cold Test Pit (CTP) has been carefully constructed to simulate stored hazardous waste occurrences. IP and resistivity surveys of the CTP show a very strong IP response and a modest resistivity response associated with the simulated waste. Several false positive resistivity anomalies are noted. 2-D inversion of the data accurately determine the lateral limits of the waste zone. The depth of burial indicated is deeper than reported by the construction engineers. Limited depth extent is recognized, in distinction to results from other, resistivity-based, methods, but it also appears too deep. IP holds promise as a method for locating buried waste

  4. Standard test method for galling resistance of material couples

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method covers a laboratory test that ranks the galling resistance of material couples using a quantitative measure. Bare metals, alloys, nonmetallic materials, coatings, and surface modified materials may be evaluated by this test method. 1.2 This test method is not designed for evaluating the galling resistance of material couples sliding under lubricated conditions, because galling usually will not occur under lubricated sliding conditions using this test method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  5. Research of the Resistance of Contact Welding Joint of R65 Type Rail

    Directory of Open Access Journals (Sweden)

    Kęstutis Dauskurdis

    2015-03-01

    Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

  6. SCC mec typing and antimicrobial resistance of methicillin-resistant Staphylococcus aureus (MRSA) from pigs of Northeast India.

    Science.gov (United States)

    Rajkhowa, S; Sarma, D K; Pegu, S R

    2016-12-01

    Staphylococcus aureus is one of the most important pathogens of both humans and animal. Methicillin-resistant Staphylococcus aureus (MRSA) is an important human pathogen that causes serious infections both in hospitals and communities due to its multidrug resistance tendency. This study was undertaken to characterize the MRSA isolates from pigs and to determine the antimicrobial resistance of these isolates. Forty nine MRSA strains (one strain per positive pig) isolated from pigs of Northeast India were characterized by SCCmec typing and antimicrobial resistance. The overall prevalence of MRSA was 7.02 % with the highest prevalence recorded in pigs aged 1-3 months (P = 0.001) and in nasal samples (P = 0.005). Two SCC mec types (type III and V) were found in Indian pigs with predominance of type V. All isolates were resistant to penicillin. Seventeen resistance groups were observed where 87.75 % isolates showed multidrug resistance (showed resistance to three or more classes of antimicrobials). The most predominant resistance pattern observed was Oxytetracycline + Penicillin + Sulfadiazine + Tetracycline accounting 12.24 % of the isolates. The present study contributes to the understanding of characteristics and antimicrobial resistance of porcine MRSA isolates which in turn will help in devising strategy for the control of this pathogen. Findings of the study also throw light on multidrug resistance MRSA and emphasize the need for judicious use of antimicrobials in animal practice.

  7. Testing and Modeling of Mechanical Characteristics of Resistance Welding Machines

    DEFF Research Database (Denmark)

    Wu, Pei; Zhang, Wenqi; Bay, Niels

    2003-01-01

    for both upper and lower electrode systems. This has laid a foundation for modeling the welding process and selecting the welding parameters considering the machine factors. The method is straightforward and easy to be applied in industry since the whole procedure is based on tests with no requirements......The dynamic mechanical response of resistance welding machine is very important to the weld quality in resistance welding especially in projection welding when collapse or deformation of work piece occurs. It is mainly governed by the mechanical parameters of machine. In this paper, a mathematical...... model for characterizing the dynamic mechanical responses of machine and a special test set-up called breaking test set-up are developed. Based on the model and the test results, the mechanical parameters of machine are determined, including the equivalent mass, damping coefficient, and stiffness...

  8. Insecticide resistance testing in malaria vectors in Tanzania ...

    African Journals Online (AJOL)

    mosquito survived much better and the scientists had a total of 467 mosquitoes to run the insecticide susceptibility tests. Innovative ways are necessary under field conditions for mosquito breeding in susceptibility studies. Key words: Malaria, Anopheles gambiae complex, larvae, fabric, resistance, susceptibility, Tanzania.

  9. Thermal-Interaction Matrix For Resistive Test Structure

    Science.gov (United States)

    Buehler, Martin G.; Dhiman, Jaipal K.; Zamani, Nasser

    1990-01-01

    Linear mathematical model predicts increase in temperature in each segment of 15-segment resistive structure used to test electromigration. Assumption of linearity based on fact: equations that govern flow of heat are linear and coefficients in equations (heat conductivities and capacities) depend only weakly on temperature and considered constant over limited range of temperature.

  10. Resistive Plate Chambers for hadron calorimetry: Tests with analog readout

    Energy Technology Data Exchange (ETDEWEB)

    Drake, Gary [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States); Repond, Jose [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States)]. E-mail: repond@hep.anl.gov; Underwood, David [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States); Xia, Lei [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States)

    2007-07-21

    Resistive Plate Chambers (RPCs) are being developed for use in a hadron calorimeter with very fine segmentation of the readout. The design of the chambers and various tests with cosmic rays are described. This paper reports on the measurements with multi-bit (or analog) readout of either a single larger or multiple smaller readout pads.

  11. Laboratory tests on fungal resistance of wood filled polyethylene composites

    Science.gov (United States)

    Craig M. Clemons; Rebecca E. Ibach

    2002-01-01

    A standard method for determining the durability of structural wood was modified for testing the fungal resistance of composites made from high density polyethylene filled with 50% wood flour. Moisture content, mechanical properties, and weight loss were measured over 12 weeks exposure to brown-and white-rot fungi. Mechanical properties were decreased, but irreversible...

  12. P type porous silicon resistivity and carrier transport

    International Nuclear Information System (INIS)

    Ménard, S.; Fèvre, A.; Billoué, J.; Gautier, G.

    2015-01-01

    The resistivity of p type porous silicon (PS) is reported on a wide range of PS physical properties. Al/PS/Si/Al structures were used and a rigorous experimental protocol was followed. The PS porosity (P % ) was found to be the major contributor to the PS resistivity (ρ PS ). ρ PS increases exponentially with P % . Values of ρ PS as high as 1 × 10 9 Ω cm at room temperature were obtained once P % exceeds 60%. ρ PS was found to be thermally activated, in particular, when the temperature increases from 30 to 200 °C, a decrease of three decades is observed on ρ PS . Based on these results, it was also possible to deduce the carrier transport mechanisms in PS. For P % lower than 45%, the conduction occurs through band tails and deep levels in the tissue surrounding the crystallites. When P % overpasses 45%, electrons at energy levels close to the Fermi level allow a hopping conduction from crystallite to crystallite to appear. This study confirms the potential of PS as an insulating material for applications such as power electronic devices

  13. Inconel type resistive alloys based on ultrahigh purity nickel

    International Nuclear Information System (INIS)

    Matsarin, K.A.; Matsarin, S.K.

    2000-01-01

    The new nickel high-ohm alloys (ρ = 1.2-1.4 μOhm · m), containing the W, Al, Mo alloying elements in the quantity, not exceeding their solubility in a solid solution, are developed on the basis of the Inconel-type standard alloy. The optical composition of the alloy was determined by the results of the alloy was determined by the results of the electric resistance measurement and technological effectiveness indices (relative to the pressure and workable metal yield). The following optimal component concentrations were established: 14-17 %Cr; 10-12 %Fe; 0.5-1.0 %Cu; 1.0-1.5 %Mn; 0.1-0.2 %C; 0.4-0.6 %Si; 0.5-3.0 %W; 5-16 %Mo; 0.5-2.0 %Al; the remainder - Ni. The new alloys are recommended as materials for resistive elements of direct-glow cathode nodes of low capacity electron tubes [ru

  14. Type testing of the Siemens Plessey electronic personal dosemeter.

    Science.gov (United States)

    Hirning, C R; Yuen, P S

    1995-07-01

    This paper presents the results of a laboratory assessment of the performance of a new type of personal dosimeter, the Electronic Personal Dosemeter made by Siemens Plessey Controls Limited. Twenty pre-production dosimeters and a reader were purchased by Ontario Hydro for the assessment. Tests were performed on radiological performance, including reproducibility, accuracy, linearity, detection threshold, energy response, angular response, neutron response, and response time. There were also tests on the effects of a variety of environmental factors, such as temperature, humidity, pulsed magnetic and electric fields, low- and high-frequency electromagnetic fields, light exposure, drop impact, vibration, and splashing. Other characteristics that were tested were alarm volume, clip force, and battery life. The test results were compared with the relevant requirements of three standards: an Ontario Hydro standard for personal alarming dosimeters, an International Electrotechnical Commission draft standard for direct reading personal dose monitors, and an International Electrotechnical Commission standard for thermoluminescence dosimetry systems for personal monitoring. In general, the performance of the Electronic Personal Dosemeter was found to be quite acceptable: it met most of the relevant requirements of the three standards. However, the following deficiencies were found: slow response time; sensitivity to high-frequency electromagnetic fields; poor resistance to dropping; and an alarm that was not loud enough. In addition, the response of the electronic personal dosimeter to low-energy beta rays may be too low for some applications. Problems were experienced with the reliability of operation of the pre-production dosimeters used in these tests.

  15. Testing compression strength of wood logs by drilling resistance

    Science.gov (United States)

    Kalny, Gerda; Rados, Kristijan; Rauch, Hans Peter

    2017-04-01

    Soil bioengineering is a construction technique using biological components for hydraulic and civil engineering solutions, based on the application of living plants and other auxiliary materials including among others log wood. Considering the reliability of the construction it is important to know about the durability and the degradation process of the wooden logs to estimate and retain the integral performance of a soil bioengineering system. An important performance indicator is the compression strength, but this parameter is not easy to examine by non-destructive methods. The Rinntech Resistograph is an instrument to measure the drilling resistance by a 3 mm wide needle in a wooden log. It is a quasi-non-destructive method as the remaining hole has no weakening effects to the wood. This is an easy procedure but result in values, hard to interpret. To assign drilling resistance values to specific compression strengths, wooden specimens were tested in an experiment and analysed with the Resistograph. Afterwards compression tests were done at the same specimens. This should allow an easier interpretation of drilling resistance curves in future. For detailed analyses specimens were investigated by means of branch inclusions, cracks and distances between annual rings. Wood specimens are tested perpendicular to the grain. First results show a correlation between drilling resistance and compression strength by using the mean drilling resistance, average width of the annual rings and the mean range of the minima and maxima values as factors for the drilling resistance. The extended limit of proportionality, the offset yield strength and the maximum strength were taken as parameters for compression strength. Further investigations at a second point in time strengthen these results.

  16. Polymyxin susceptibility testing, interpretative breakpoints and resistance mechanisms: An update.

    Science.gov (United States)

    Bakthavatchalam, Yamuna Devi; Pragasam, Agila Kumari; Biswas, Indranil; Veeraraghavan, Balaji

    2018-03-01

    Emerging multidrug-resistant (MDR) nosocomial pathogens are a great threat. Polymyxins, an old class of cationic polypeptide antibiotic, are considered as last-resort drugs in treating infections caused by MDR Gram-negative bacteria. Increased use of polymyxins in treating critically ill patients necessitates routine polymyxin susceptibility testing. However, susceptibility testing both of colistin and polymyxin B (PMB) is challenging. In this review, currently available susceptibility testing methods are briefly discussed. The multicomponent composition of colistin and PMB significantly influences susceptibility testing. In addition, poor diffusion in the agar medium, adsorption to microtitre plates and the synergistic effect of the surfactant polysorbate 80 with polymyxins have a great impact on the performance of susceptibility testing methods This review also describes recently identified chromosomal resistance mechanisms, including modification of lipopolysaccharide (LPS) with 4-amino-4-deoxy-l-arabinose (L-Ara4-N) and phosphoethanolamine (pEtN) resulting in alteration of the negative charge, as well as the plasmid-mediated colistin resistance determinants mcr-1, mcr-1.2, mcr-2 and mcr-3. Copyright © 2017 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

  17. Evaluation of the Impact Resistance of Various Composite Sandwich Beams by Vibration Tests

    Directory of Open Access Journals (Sweden)

    Amir Shahdin

    2011-01-01

    Full Text Available Impact resistance of different types of composite sandwich beams is evaluated by studying vibration response changes (natural frequency and damping ratio. This experimental works will help aerospace structural engineer in assess structural integrity using classification of impact resistance of various composite sandwich beams (entangled carbon and glass fibers, honeycomb and foam cores. Low velocity impacts are done below the barely visible impact damage (BVID limit in order to detect damage by vibration testing that is hardly visible on the surface. Experimental tests are done using both burst random and sine dwell testing in order to have a better confidence level on the extracted modal parameters. Results show that the entangled sandwich beams have a better resistance against impact as compared to classical core materials.

  18. Field Test Evaluation of Effect on Cone Resistance Caused by Change in Penetration Rate

    DEFF Research Database (Denmark)

    Poulsen, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2012-01-01

    in the laboratory. A change in the measured cone resistance occurs by lowering the penetration rate. This is caused by the changes in drainage conditions. Compared to the normal penetration rate of 20 mm/s, this paper illustrates that lowering the penetration rate leads to an increase in the cone resistance from 1......This paper presents how a change in cone penetration rate affects the measured cone resistance during cone penetration testing in silty soils. Regardless of soil, type the standard rate of penetration is 20 mm/s and it is generally accepted that undrained penetration occurs in clay while drained...... penetration occurs in sand. In intermediate soils such as silty soils, the standard cone penetration rate may result in drainage conditions varying from undrained to partially or fully drained conditions. Field cone penetrations tests have been conducted with different penetration rates on a test site...

  19. Fracture Resistance of Premolars Restored by Various Types and Placement Techniques of Resin Composites

    Directory of Open Access Journals (Sweden)

    Horieh Moosavi

    2012-01-01

    Full Text Available To verify the fracture resistance of premolars with mesioocclusodistal preparations restored by different resin composites and placement techniques. Sixty premolars were randomly divided into two groups based on type of composite resin: Filtek P60 or Nulite F, and then each group was separated into three subgroups: bulk, centripetal, and fiber insert according to the type of placement method (n=10. Single-bond adhesive system was used as composite bonding according to the manufacturer's instructions. Specimens were restored in Groups 1, 2, and 3 with Filtek P60 and in Groups 4, 5, and 6 with Nulite F. After being stored 24 hours at 37∘C, a 4 mm diameter steel sphere in a universal testing machine was applied on tooth buccal and lingual cusps at a cross-head speed of 5 mm/min until fracture occurred. Groups 3 and 6 showed higher fracture resistance than Groups 1, 2, 4, and 5. Among the placement techniques, the fiber insert method had a significant effect, but the type of composite was ineffective. The insertion technique in contrast to the type of material had a significant influence on the fracture resistance of premolar teeth.

  20. ACh-induced hyperpolarization and decreased resistance in mammalian type II vestibular hair cells.

    Science.gov (United States)

    Poppi, Lauren A; Tabatabaee, Hessam; Drury, Hannah R; Jobling, Phillip; Callister, Robert J; Migliaccio, Americo A; Jordan, Paivi M; Holt, Joseph C; Rabbitt, Richard D; Lim, Rebecca; Brichta, Alan M

    2018-01-01

    In the mammalian vestibular periphery, electrical activation of the efferent vestibular system (EVS) has two effects on afferent activity: 1) it increases background afferent discharge and 2) decreases afferent sensitivity to rotational stimuli. Although the cellular mechanisms underlying these two contrasting afferent responses remain obscure, we postulated that the reduction in afferent sensitivity was attributed, in part, to the activation of α9- containing nicotinic acetylcholine (ACh) receptors (α9*nAChRs) and small-conductance potassium channels (SK) in vestibular type II hair cells, as demonstrated in the peripheral vestibular system of other vertebrates. To test this hypothesis, we examined the effects of the predominant EVS neurotransmitter ACh on vestibular type II hair cells from wild-type (wt) and α9-subunit nAChR knockout (α9 -/- ) mice. Immunostaining for choline acetyltransferase revealed there were no obvious gross morphological differences in the peripheral EVS innervation among any of these strains. ACh application onto wt type II hair cells, at resting potentials, produced a fast inward current followed by a slower outward current, resulting in membrane hyperpolarization and decreased membrane resistance. Hyperpolarization and decreased resistance were due to gating of SK channels. Consistent with activation of α9*nAChRs and SK channels, these ACh-sensitive currents were antagonized by the α9*nAChR blocker strychnine and SK blockers apamin and tamapin. Type II hair cells from α9 -/- mice, however, failed to respond to ACh at all. These results confirm the critical importance of α9nAChRs in efferent modulation of mammalian type II vestibular hair cells. Application of exogenous ACh reduces electrical impedance, thereby decreasing type II hair cell sensitivity. NEW & NOTEWORTHY Expression of α9 nicotinic subunit was crucial for fast cholinergic modulation of mammalian vestibular type II hair cells. These findings show a multifaceted

  1. Spread of carbapenem-resistant Acinetobacter baumannii global clone 2 in Asia and AbaR-type resistance islands.

    Science.gov (United States)

    Kim, Dae Hun; Choi, Ji-Young; Kim, Hae Won; Kim, So Hyun; Chung, Doo Ryeon; Peck, Kyong Ran; Thamlikitkul, Visanu; So, Thomas Man-Kit; Yasin, Rohani M D; Hsueh, Po-Ren; Carlos, Celia C; Hsu, Li Yang; Buntaran, Latre; Lalitha, M K; Song, Jae-Hoon; Ko, Kwan Soo

    2013-11-01

    In this surveillance study, we identified the genotypes, carbapenem resistance determinants, and structural variations of AbaR-type resistance islands among carbapenem-resistant Acinetobacter baumannii (CRAB) isolates from nine Asian locales. Clonal complex 92 (CC92), corresponding to global clone 2 (GC2), was the most prevalent in most Asian locales (83/108 isolates; 76.9%). CC108, or GC1, was a predominant clone in India. OXA-23 oxacillinase was detected in CRAB isolates from most Asian locales except Taiwan. blaOXA-24 was found in CRAB isolates from Taiwan. AbaR4-type resistance islands, which were divided into six subtypes, were identified in most CRAB isolates investigated. Five isolates from India, Malaysia, Singapore, and Hong Kong contained AbaR3-type resistance islands. Of these, three isolates harbored both AbaR3- and AbaR4-type resistance islands simultaneously. In this study, GC2 was revealed as a prevalent clone in most Asian locales, with the AbaR4-type resistance island predominant, with diverse variants. The significance of this study lies in identifying the spread of global clones of carbapenem-resistant A. baumannii in Asia.

  2. What Are the Types of Genetic Tests?

    Science.gov (United States)

    ... or catastrophe victims, rule out or implicate a crime suspect, or establish biological relationships between people (for example, paternity). For more information about the uses of genetic testing: A Brief Primer on Genetic Testing , which ...

  3. Electroforming-free resistive switching memory effect in transparent p-type tin monoxide

    KAUST Repository

    Hota, M. K.; Caraveo-Frescas, J. A.; McLachlan, M. A.; Alshareef, Husam N.

    2014-01-01

    We report reproducible low bias bipolar resistive switching behavior in p-type SnO thin film devices without extra electroforming steps. The experimental results show a stable resistance ratio of more than 100 times, switching cycling performance up

  4. Grain boundary composition and irradiation-assisted stress corrosion cracking resistance in Type 348 stainless steel

    International Nuclear Information System (INIS)

    Jacobs, A.J.; Wozadlo, G.P.; Nakata, K.

    1994-01-01

    Scanning transmission electron microscopy (STEM) analyses, in-reactor swelling mandrel tests, and laboratory constant extension rate tensile (CERT) tests were conducted on nine custom type 348 (UNS S34800) stainless steel (SS) alloys in an attempt to correlate grain boundary composition with irradiation-assisted stress corrosion cracking (IASCC) resistance. Phosphorus (P) enrichment showed the best correlation with in-reactor test results, and chromium (Cr) depletion showed the best correlation with laboratory results. Silicon (Si) and P enrichment were found to depend quantitatively on the bulk concentrations of these elements. The amount of Cr depletion seemed dependent at least partially on the amounts of Si and/or P enrichment. Si and P enrichment and Cr depletion were suppressed by higher carbon (C) contents, such as that present in commercial-purity type 348 SS

  5. Prevalence of insulin resistance in siblings of type 2 diabetics of north west punjabi population.

    Science.gov (United States)

    Kaur, Sukhraj; Mahajan, Mridula; Bal, B S

    2014-08-01

    Insulin resistance a physiological condition is marked by hyperglycemia and failure of cells to respond to normal action thus hyperinsulinemia. It is prevalent in individuals having genetic predisposition and family history of type 2 diabetes mellitus. Physically inactive individuals having sedentary life style are also at a risk of developing insulin resistance. The present study was planned to observe the prevalence of insulin resistance or pre diabetes in various age groups of North West Punjabi population. A total of 400 families comprising of 1159 offsprings of diabetic patients and siblings amongst each were included in the present study. All these 400 families had history of type 2 diabetes mellitus in the present or past generation. Written consent was taken from the head of the family for inclusion in the study. Fasting samples were collected and analysed for Glucose, Glycosylated Hb, complete lipid profile, Insulin and c-peptide. Body mass index, waist hip ratio and HOMA-IR were calculated. Comparison of mean of various parameters was done using student t-test. Analysis of variance (ANOVA) was applied for comparison between groups followed by Bonferroni post hoc analysis. Pearson's correlation method was used for quantitative variables. Statistical significance was defined as p18-35 years were more prone to insulin resistance as compared to other age groups. Insulin resistance at a young age of 18-35 years predisposes these individuals to coronary events. Females in reproductive years are more prone to insulin resistance or pre diabetes as compared to males of the same age group.

  6. Preparation and testing of corrosion and spallation-resistant coatings

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, John P. [Univ. of North Dakota, Grand Forks, ND (United States); Cavalli, Matthew N. [Univ. of North Dakota, Grand Forks, ND (United States)

    2016-06-30

    The goal of this project was to take a recently developed method of bonding oxide dispersion-strengthened (ODS) FeCrAl plating to nickel superalloys closer to commercial use in syngas-fired turbines. The project was designed to better understand and develop the bonding process and to determine if plating APMT®, a specific highly oxidation-resistant ODS FeCrAl alloy made by Kanthal, onto nickel-based superalloy turbine parts is a viable method for substantially improving the lifetimes and maximum use temperatures of the parts. The superalloys investigated for protection were CM247LC and Rene® 80, both alumina scale-forming alloys. The method for bonding the APMT plate to the superalloys is called evaporative metal bonding, which involves placing a thin foil of zinc between the plate and the superalloy, clamping them together, and heating in an atmosphere-controlled furnace. Upon heating, the zinc melts and dissolves the oxide skins of the alloys at the bond line, allowing the two alloys to diffuse into each other. The zinc then diffuses through the alloys and evaporates from their surfaces, creating a bond between the APMT and the superalloy that is stronger than the APMT itself. Testing showed that the diffusivity of zinc in both APMT and CM247LC is quite similar at 700°C but 15 times higher in the APMT at 1214°C. Coefficients of thermal expansion were determined for each of the alloys as a function of temperature. This information was entered into a finite-element model using ANSYS, which was used to design a clamping jig for pressing the APMT to the superalloys at the bonding temperature. Scanning electron microscopy analyses of representative joints showed that no zinc remained in the alloys after bonding Unfortunately, the analyses also showed some small pieces of broken aluminum oxide scale near the bond lines, indicating that its scale was not sufficiently removed during prebonding cleaning. Samples from each of the bonded blocks were sent to Siemens for

  7. The update of resist outgas testing for metal containing resists at EIDEC

    Science.gov (United States)

    Shiobara, Eishi; Mikami, Shinji

    2017-10-01

    The metal containing resist is one of the candidates for high sensitivity resists. EIDEC has prepared the infrastructure for outgas testing in hydrogen environment for metal containing resists at High Power EUV irradiation tool (HPEUV). We have experimentally obtained the preliminary results of the non-cleanable metal contamination on witness sample using model material by HPEUV [1]. The metal contamination was observed at only the condition of hydrogen environment. It suggested the generation of volatile metal hydrides by hydrogen radicals. Additionally, the metal contamination on a witness sample covered with Ru was not removed by hydrogen radical cleaning. The strong interaction between the metal hydride and Ru was confirmed by the absorption simulation. Recently, ASML announced a resist outgassing barrier technology using Dynamic Gas Lock (DGL) membrane located between projection optics and wafer stage [2], [3]. DGL membrane blocks the diffusion of all kinds of resist outgassing to the projection optics and prevents the reflectivity loss of EUV mirrors. The investigation of DGL membrane for high volume manufacturing is just going on. It extends the limitation of material design for EUV resists. However, the DGL membrane has an impact for the productivity of EUV scanners due to the transmission loss of EUV light and the necessity of periodic maintenance. The well understanding and control of the outgassing characteristics of metal containing resists may help to improve the productivity of EUV scanner. We consider the outgas evaluation for the resists still useful. For the improvement of resist outgas testing by HPEUV, there are some issues such as the contamination limited regime, the optimization of exposure dose to obtain the measurable contamination film thickness and the detection of minimum amount of metal related outgas species generated. The investigation and improvement for these issues are ongoing. The updates will be presented in the conference. This

  8. Fracture resistance of 3 types of primary esthetic stainless steel crowns.

    Science.gov (United States)

    Beattie, Sean; Taskonak, Burak; Jones, James; Chin, Judith; Sanders, Brian; Tomlin, Angela; Weddell, James

    2011-01-01

    Demand is increasing for esthetic restorations in pediatric dentistry. When full coverage is indicated, one option is to use esthetic stainless steel crowns (SSCs). However, this type of crown is prone to fracture. The purpose of this study was to evaluate the fracture resistance of 3 types of esthetic SSCs. Esthetic SSCs for first primary mandibular molars were cemented to idealized epoxy dies with glass ionomer cement. The die-crown units were fractured on a universal testing machine. The force was delivered by a stainless steel ball fixture, set in a uniaxial lever to replicate a cusp contact, with a crosshead speed of 1 mm/min. The differences among the 3 types of crown, in terms of force required to fracture, were compared statistically by 1-way analysis of variance. Pairwise comparisons were performed with Fisher's protected least significant difference test, at an overall significance level of 5%. The force required to fracture, expressed as average ± standard error, did not differ significantly among the 3 brands of esthetic SSCs: 1730 N ± 50 N, 1826 N ± 62 N and 1671 N ± 68 N, respectively (p = 0.19), well below the maximum bite force of pediatric patients determined in a previous study. Esthetic SSCs should be able to resist occlusal forces over short clinical periods. However, long-term occlusal loading and fatigue failures should be taken into account when evaluating the success of this type of crown.

  9. Mendelian randomization studies do not support a causal role for reduced circulating adiponectin levels in insulin resistance and type 2 diabetes

    NARCIS (Netherlands)

    H. Yaghootkar (Hanieh); C. Lamina (Claudia); R.A. Scott (Robert); Z. Dastani (Zari); M.-F. Hivert (Marie-France); L.L. Warren (Liling); A. Stancáková (Alena); S.G. Buxbaum (Sarah); L.-P. Lyytikäinen (Leo-Pekka); P. Henneman (Peter); Y. Wu (Ying); C.Y.Y. Cheung (Chloe); J.S. Pankow (James); A.U. Jackson (Anne); S. Gustafsson (Stefan); J.H. Zhao (Jing Hua); C. Ballantyne (Christie); W. Xie (Weijia); R.N. Bergman (Richard); M. Boehnke (Michael); F. El Bouazzaoui (Fatiha); F.S. Collins (Francis); S.H. Dunn (Sandra); J. Dupuis (Josée); N.G. Forouhi (Nita); C.J. Gillson (Christopher); A.T. Hattersley (Andrew); J. Hong (Jaeyoung); M. Kähönen (Mika); J. Kuusisto (Johanna); L. Kedenko (Lyudmyla); F. Kronenberg (Florian); A. Doria (Andrea); T.L. Assimes (Themistocles); E. Ferrannini (Ele); T. Hansen (Torben); K. Hao (Ke); H. Häring (Hans); J.W. Knowles (Joshua); C.M. Lindgren (Cecilia); J.J. Nolan (John); J. Paananen (Jussi); O. Pedersen (Oluf); T. Quertermous (Thomas); U. Smith (Ulf); T. Lehtimäki (Terho); C.-T. Liu (Ching-Ti); R.J.F. Loos (Ruth); M.I. McCarthy (Mark); A.D. Morris (Andrew); R.S. Vasan (Ramachandran Srini); T.D. Spector (Timothy); T.M. Teslovich (Tanya); J. Tuomilehto (Jaakko); J.A.P. Willems van Dijk (Ko); J. Viikari (Jorma); N. Zhu (Na); C. Langenberg (Claudia); E. Ingelsson (Erik); R.K. Semple (Robert); A. Sinaiko (Alan); C.N.A. Palmer (Colin); M. Walker (Mark); K.S.L. Lam (Karen); B. Paulweber (Bernhard); K.L. Mohlke (Karen); C.M. van Duijn (Cornelia); O. Raitakari (Olli); A. Bidulescu (Aurelian); N.J. Wareham (Nick); M. Laakso (Markku); D. Waterworth (Dawn); D.A. Lawlor (Debbie); J.B. Meigs (James); J.B. Richards (Brent); T.M. Frayling (Timothy)

    2013-01-01

    textabstractAdiponectin is strongly inversely associated with insulin resistance and type 2 diabetes, but its causal role remains controversial. We used a Mendelian randomization approach to test the hypothesis that adiponectin causally influences insulin resistance and type 2 diabetes. We used

  10. Mendelian Randomisation Studies Do Not Support a Causal Role for Reduced Circulating Adiponectin Levels in Insulin Resistance and Type 2 Diabetes

    DEFF Research Database (Denmark)

    Yaghootkar, Hanieh; Lamina, Claudia; Scott, Robert A

    2013-01-01

    Adiponectin is strongly inversely associated with insulin resistance and type 2 diabetes but its causal role remains controversial. We used a Mendelian randomisation approach to test the hypothesis that adiponectin causally influences insulin resistance and type 2 diabetes. We used genetic varian...

  11. Testing the permeability and corrosion resistance of micro-mechanically interlocked joints

    DEFF Research Database (Denmark)

    Byskov-Nielsen, Jeppe; Holm, Allan Hjarbæk; Højsholt, Rune

    2011-01-01

    Micro-mechanical interlocking (MMI) can be applied to create new and interesting composite materials. We have employed laser structuring to achieve MMI between stainless steel and plastic with extremely high joint strength. However, the water permeability and corrosion resistance of the joint must...... is conducted. The permeability seems to be consistent with the Hagen–Poiseuille equation independent of the laser structuring technique and is orders of magnitudes larger than the diffusion rate through the plastic. Two different types of corrosion tests have been undertaken, and we show that care must...... be taken in order not to degrade the corrosion resistance of the sample to an unacceptable level....

  12. Advances in impact resistance testing for explosion-proof electrical equipment

    Directory of Open Access Journals (Sweden)

    Pasculescu Vlad Mihai

    2017-01-01

    Full Text Available The design, construction and exploitation of electrical equipment intended to be used in potentially explosive atmospheres presents a series of difficulties. Therefore, the approach of these phases requires special attention concerning technical, financial and occupational health and safety aspects. In order for them not to generate an ignition source for the explosive atmosphere, such equipment have to be subjected to a series of type tests aiming to decrease the explosion risk in technological installations which operate in potentially explosive atmospheres. Explosion protection being a concern of researchers and authorities worldwide, testing and certification of explosion-proof electrical equipment, required for their conformity assessment, are extremely important, taking into account the unexpected explosion hazard due to potentially explosive atmospheres, risk which has to be minimized in order to ensure the occupational health and safety of workers, for preventing material losses and for decreasing the environmental pollution. Besides others, one of the type tests, which shall be applied, for explosion-proof electrical equipment is the impact resistance test, described in detail in EN 60079 which specifies the general requirements for construction, testing and marking of electrical equipment and Ex components intended for use in explosive atmospheres. This paper presents an analysis on the requirements of the impact resistance test for explosion-proof electrical equipment and on the possibilities to improve this type of test, by making use of modern computer simulation tools based on finite element analysis, techniques which are widely used nowadays in the industry and for research purposes.

  13. Performance of the EUCAST disk diffusion method, the CLSI agar screen method, and the Vitek 2 automated antimicrobial susceptibility testing system for detection of clinical isolates of Enterococci with low- and medium-level VanB-type vancomycin resistance

    DEFF Research Database (Denmark)

    Hegstad, Kristin; Giske, Christian G; Haldorsen, Bjørg

    2014-01-01

    faecium (n=18) strains with and without nonsusceptibility to vancomycin was examined blindly in Danish (n=5), Norwegian (n=13), and Swedish (n=10) laboratories using the EUCAST disk diffusion method (n=28) and the CLSI agar screen (n=18) or the Vitek 2 system (bioMérieux) (n=5). The EUCAST disk diffusion...... method (very major error [VME] rate, 7.0%; sensitivity, 0.93; major error [ME] rate, 2.4%; specificity, 0.98) and CLSI agar screen (VME rate, 6.6%; sensitivity, 0.93; ME rate, 5.6%; specificity, 0.94) performed significantly better (P=0.02) than the Vitek 2 system (VME rate, 13%; sensitivity, 0.87; ME...... rate, 0%; specificity, 1). The performance of the EUCAST disk diffusion method was challenged by differences in vancomycin inhibition zone sizes as well as the experience of the personnel in interpreting fuzzy zone edges as an indication of vancomycin resistance. Laboratories using Oxoid agar (P

  14. Use of GenoType® MTBDRplus assay to assess drug resistance and mutation patterns of multidrug-resistant tuberculosis isolates in northern India

    Directory of Open Access Journals (Sweden)

    A K Maurya

    2013-01-01

    Full Text Available Purpose: The emergence and spread of multidrug-resistant tuberculosis (MDR-TB is a major public health problem. The diagnosis of MDR-TB is of paramount importance in establishing appropriate clinical management and infection control measures. The aim of this study was to evaluate drug resistance and mutational patterns in clinical isolates MDR-TB by GenoType® MTBDRplus assay. Material and Methods: A total of 350 non-repeated sputum specimens were collected from highly suspected drug-resistant pulmonary tuberculosis (PTB cases; which were processed by microscopy, culture, differentiation and first line drug susceptibility testing (DST using BacT/ALERT 3D system. Results: Among a total of 125 mycobacterium tuberculosis complex (MTBC strains, readable results were obtained from 120 (96% strains by GenoType® MTBDRplus assay. Only 45 MDR-TB isolates were analysed for the performance, frequency and mutational patterns by GenoType® MTBDRplus assay. The sensitivity of the GenoType® MDRTBplus assay for detecting individual resistance to rifampicin (RIF, isoniazid (INH and multidrug resistance was found to be 95.8%, 96.3% and 97.7%, respectively. Mutation in codon S531L of the rpoB gene and codon S315T1 of katG genes were dominated in MDR-TB strains, respectively (P < 0.05. Conclusions: The GenoType® MTBDRplus assay is highly sensitive with short turnaround times and a rapid test for the detection of the most common mutations conferring resistance in MDR-TB strains that can readily be included in a routine laboratory workflow.

  15. A nonlinear HP-type complementary resistive switch

    Directory of Open Access Journals (Sweden)

    Paul K. Radtke

    2016-05-01

    Full Text Available Resistive Switching (RS is the change in resistance of a dielectric under the influence of an external current or electric field. This change is non-volatile, and the basis of both the memristor and resistive random access memory. In the latter, high integration densities favor the anti-serial combination of two RS-elements to a single cell, termed the complementary resistive switch (CRS. Motivated by the irregular shape of the filament protruding into the device, we suggest a nonlinearity in the resistance-interpolation function, characterized by a single parameter p. Thereby the original HP-memristor is expanded upon. We numerically simulate and analytically solve this model. Further, the nonlinearity allows for its application to the CRS.

  16. A nonlinear HP-type complementary resistive switch

    Science.gov (United States)

    Radtke, Paul K.; Schimansky-Geier, Lutz

    2016-05-01

    Resistive Switching (RS) is the change in resistance of a dielectric under the influence of an external current or electric field. This change is non-volatile, and the basis of both the memristor and resistive random access memory. In the latter, high integration densities favor the anti-serial combination of two RS-elements to a single cell, termed the complementary resistive switch (CRS). Motivated by the irregular shape of the filament protruding into the device, we suggest a nonlinearity in the resistance-interpolation function, characterized by a single parameter p. Thereby the original HP-memristor is expanded upon. We numerically simulate and analytically solve this model. Further, the nonlinearity allows for its application to the CRS.

  17. 30 CFR 14.22 - Test for flame resistance of conveyor belts.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test for flame resistance of conveyor belts. 14..., EVALUATION, AND APPROVAL OF MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS Technical Requirements § 14.22 Test for flame resistance of conveyor belts. (a) Test procedures. The test...

  18. Eosinophil inversely associates with type 2 diabetes and insulin resistance in Chinese adults.

    Directory of Open Access Journals (Sweden)

    Liying Zhu

    Full Text Available CONTEXT: Limited population-based study focused on relationship between eosinophil and type 2 diabetes (T2D. OBJECTIVES: We aimed to evaluate the relationship between peripheral eosinophil percentage and glucose metabolism and insulin resistance in a large sample size of Chinese population aged 40 and older. DESIGN AND METHODS: A cross-sectional study was performed among 9,111 Chinese adults including 3,561 men and 5,550 women. The glucose metabolism status was confirmed by 75-g oral glucose tolerance test. Homeostasis model assessment of insulin resistance index and serum insulin levels were used to evaluate insulin resistance. Homeostasis model assessment-B was used to evaluate β cell function. RESULTS: The average age of participants was 58.5 years. The prevalence of T2D decreased across the tertiles of eosinophil percentage (21.3%, 18.2% and 16.9%, P<0.0001. Each one tertile increase of eosinophil percentage inversely associated with risk of T2D when referred not only to normal glucose tolerance (NGT (odds ratio (OR 0.81, 95% CI 0.76-0.87, P< 0.0001, but also to impaired glucose regulation (OR 0.89, 95% CI 0.83-0.97, P = 0.006, respectively, after adjustment for the confounding factors. Compared with the first tertile, the third tertile of eosinophil percentage associated with a 23% decrease of insulin resistance in NGT participants after full adjustments (P = 0.005. Each 1-standard deviation of increment of eosinophil percentage associated with a 37% decrease of insulin resistance (P = 0.005. CONCLUSIONS: Higher peripheral eosinophil percentage was associated with decreased risk of T2D. The inverse relation to insulin resistance was detected in NGT participants.

  19. Determination of the resistance types to Spodoptera cosmioides (Walker (Lepidoptera: Noctuidae in soybean genotypes

    Directory of Open Access Journals (Sweden)

    Arlindo Leal Boiça Júnior

    2015-04-01

    Full Text Available The aim of this work was to evaluate the resistance types in soybean genotypes to Spodoptera cosmioides (Walker in laboratory. Soybean genotypes assessed were as follows: ‘IAC 100’ (resistance standard, ‘BR16’ (susceptible standard, ‘Dowling’, PI 227687, PI 274454, ‘IGRA RA 626 RR’, PI 227682, ‘BRSGO 8360’, ‘IGRA RA 516 RR’ and ‘P 98Y11 RR’. Free-choice and no-choice feeding non-preference tests were done using two newly-hatched larvae per genotype or one third-instar larva per genotype in both tests. Larvae attractiveness was evaluated in different times, and at the end of the experiments the leaf area consumed was quantified. In the antibiosis test, newly-hatched larvae were individualized into Petri dishes, where leaflets of the genotypes were offered over the larval stage, and the following biological parameters were assessed: period and viability of larvae, pupae and overall (larvae + pupae, weight of larvae and pupae, sex ratio and adults longevity. Overall, in the feeding preference tests, significant differences were not found in leaf consumption among the genotypes. In the antibiosis assay, genotypes PI 227687, PI 227682 and ‘IAC 100’ caused 100% larval mortality and the lowest weight of larvae, ranging between 37.65 and 85.56 mg. All soybean genotypes evaluated do not exhibit feeding non-preference type resistance to S. cosmioides, and PI 227687, PI 227682 and ‘IAC 100’ highlighted for possessing antibiosis.

  20. Abrasive Wear Resistance of Tool Steels Evaluated by the Pin-on-Disc Testing

    Science.gov (United States)

    Bressan, José Divo; Schopf, Roberto Alexandre

    2011-05-01

    Present work examines tool steels abrasion wear resistance and the abrasion mechanisms which are one main contributor to failure of tooling in metal forming industry. Tooling used in cutting and metal forming processes without lubrication fails due to this type of wear. In the workshop and engineering practice, it is common to relate wear resistance as function of material hardness only. However, there are others parameters which influences wear such as: fracture toughness, type of crystalline structure and the occurrence of hard precipitate in the metallic matrix and also its nature. In the present investigation, the wear mechanisms acting in tool steels were analyzed and, by normalized tests, wear resistance performance of nine different types of tool steels were evaluated by pin-on-disc testing. Conventional tool steels commonly used in tooling such as AISI H13 and AISI A2 were compared in relation to tool steels fabricated by sintering process such as Crucible CPM 3V, CPM 9V and M4 steels. Friction and wear testing were carried out in a pin-on-disc automated equipment which pin was tool steel and the counter-face was a abrasive disc of silicon carbide. Normal load of 5 N, sliding velocity of 0.45 m/s, total sliding distance of 3000 m and room temperature were employed. The wear rate was calculated by the Archard's equation and from the plotted graphs of pin cumulated volume loss versus sliding distance. Specimens were appropriately heat treated by quenching and three tempering cycles. Percentage of alloying elements, metallographic analyses of microstructure and Vickers microhardness of specimens were performed, analyzed and correlated with wear rate. The work is concluded by the presentation of a rank of tool steel wear rate, comparing the different tool steel abrasion wear resistance: the best tool steel wear resistance evaluated was the Crucible CPM 9V steel.

  1. InChIKey collision resistance: an experimental testing

    Directory of Open Access Journals (Sweden)

    Pletnev Igor

    2012-12-01

    Full Text Available Abstract InChIKey is a 27-character compacted (hashed version of InChI which is intended for Internet and database searching/indexing and is based on an SHA-256 hash of the InChI character string. The first block of InChIKey encodes molecular skeleton while the second block represents various kinds of isomerism (stereo, tautomeric, etc.. InChIKey is designed to be a nearly unique substitute for the parent InChI. However, a single InChIKey may occasionally map to two or more InChI strings (collision. The appearance of collision itself does not compromise the signature as collision-free hashing is impossible; the only viable approach is to set and keep a reasonable level of collision resistance which is sufficient for typical applications. We tested, in computational experiments, how well the real-life InChIKey collision resistance corresponds to the theoretical estimates expected by design. For this purpose, we analyzed the statistical characteristics of InChIKey for datasets of variable size in comparison to the theoretical statistical frequencies. For the relatively short second block, an exhaustive direct testing was performed. We computed and compared to theory the numbers of collisions for the stereoisomers of Spongistatin I (using the whole set of 67,108,864 isomers and its subsets. For the longer first block, we generated, using custom-made software, InChIKeys for more than 3 × 1010 chemical structures. The statistical behavior of this block was tested by comparison of experimental and theoretical frequencies for the various four-letter sequences which may appear in the first block body. From the results of our computational experiments we conclude that the observed characteristics of InChIKey collision resistance are in good agreement with theoretical expectations.

  2. Nitrogen implantation of type 303 stainless steel gears for improved wear and fatigue resistance

    International Nuclear Information System (INIS)

    Kustas, F.M.; Misra, M.S.; Tack, W.T.

    1987-01-01

    Fine-positioning mechanisms are responsible for accurate and reproducible control of aerospace system devices, i.e. filter grading wheels. Low wear and fatigue resistance of mechanism components, such as pinions and gears, can reduce system performance and reliability. Surface modification using ion implantation with nitrogen was used on type 303 stainless steel pinions and gears to increase tribological performance. Wear-life tests of untreated, nitrogen-implanted and nitrogen-implanted-and-annealed gears were performed in a fine-positioning mechanism under controlled environmental conditions. Wear and fatigue resistance were monitored at selected time intervals which were a percentage of the predicted failure life as determined by a numerical stress analysis. Surface analyses including scanning electron microscopy and Auger electron spectroscopy were performed to establish the wear and fatigue mechanisms and the nitrogen concentration-depth distributions respectively. Nitrogen implantation resulted in a significant improvement in both surface wear and fatigue spalling resistance over those of untreated gears. A 40% reduction in surface wear and a 44% reduction in dedendum spalling was observed. In contrast, the nitrogen-implanted-and-annealed gears showed a 46% increase in sliding wear area and an 11% increase in spall density compared with those of untreated gears, indicating that the post-implantation anneal was detrimental to wear and fatigue resistance. (orig.)

  3. MALDI-TOF typing highlights geographical and fluconazole resistance clusters in Candida glabrata.

    Science.gov (United States)

    Dhieb, C; Normand, A C; Al-Yasiri, M; Chaker, E; El Euch, D; Vranckx, K; Hendrickx, M; Sadfi, N; Piarroux, R; Ranque, S

    2015-06-01

    Utilizing matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra for Candida glabrata typing would be a cost-effective and easy-to-use alternative to classical DNA-based typing methods. This study aimed to use MALDI-TOF for the typing of C. glabrata clinical isolates from various geographical origins and test its capacity to differentiate between fluconazole-sensitive and -resistant strains.Both microsatellite length polymorphism (MLP) and MALDI-TOF mass spectra of 58 C. glabrata isolates originating from Marseilles (France) and Tunis (Tunisia) as well as collection strains from diverse geographic origins were analyzed. The same analysis was conducted on a subset of C. glabrata isolates that were either susceptible (MIC ≤ 8 mg/l) or resistant (MIC ≥ 64 mg/l) to fluconazole.According to the seminal results, both MALDI-TOF and MLP classifications could highlight C. glabrata population structures associated with either geographical dispersal barriers (p typing to investigate C. glabrata infection outbreaks and predict the antifungal susceptibility profile of clinical laboratory isolates. © The Author 2015. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Gender difference and relationship of insulin resistance with microalbuminuria type-2 diabetes

    International Nuclear Information System (INIS)

    Ahmed, S.; Ahmad, A.

    2010-01-01

    To determine the relationship of insulin resistance with microalbuminuria in patients of type-2 Diabetes mellitus and observe gender difference if any. Study Design: A cross-sectional study. Place and Duration of Study: Diabetes Clinic of Combined Military Hospital, Malir Cantt, from April to August 2007. Methodology: One hundred and fifty five patients of type-2 Diabetes mellitus were included in the study who had either microalbuminuria or normo albuminuria. Body mass index, waist circumference and blood pressure were recorded. Fasting venous blood sample was collected for plasma glucose (FPG), serum insulin, total and HDL cholesterol, triglycerides, creatinine and HbA1c. Urine albumin excretion was determined using urine albumin to creatinine ratio. Insulin resistance was calculated from fasting plasma glucose and serum insulin levels, using homeostatic model assessment of insulin resistance (HOMA-IR). Correlation and association testing was carried out with significance at p < 0.05. Results: Microalbuminuria was found to be significantly correlated with HOMA-IR (r = 0.33, p < 0.001), serum insulin (r = 0.28, p = < 0.001), body mass index (r = 0.18, p = 0.02) and waist circumference (r = 0.21, p = 0.008). This correlation was more significant in women (n = 85, r = 0.48, p = < 0.0001) as compared to men (n = 70, r = 0.14, p = 0.12). The correlation between HOMA-IR and urine albumin excretion remained highly significant (p = 0.001) after controlling for gender, age, duration of diabetes, waist circumference, hypertension, triglycerides and HbA1c. Conclusion: Urinary albumin excretion in patients of type-2 diabetes is strongly associated with insulin resistance and related cardiovascular risk factors. This association appears to be stronger in women than the men, in our population. (author)

  5. Standard Test Method for Abrasive Wear Resistance of Cemented

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the determination of abrasive wear resistance of cemented carbides. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents of inch-pound units are in parentheses and may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  6. Antimicrobial resistance and typing of Salmonella isolated from street vended foods and associated environment.

    Science.gov (United States)

    Anukampa; Shagufta, Bi; Sivakumar, M; Kumar, Surender; Agarwal, Rajesh Kumar; Bhilegaonkar, Kiran Narayan; Kumar, Ashok; Dubal, Zunjar Baburao

    2017-07-01

    The present study was carried out to find out the occurrence and types of Salmonella present in street vended foods and associated environment, and their resistance pattern against various antibiotics. About 1075 street vended food and associated environment samples were processed for isolation and confirmation of different Salmonella spp. by targeting gene specific inv A gene and serotype specific Sdf I, Via B and Spy genes by PCR. Selected Salmonella isolates were screened for antibiotic resistance by using Baeur-Kirby disk diffusion test. Out of 1075 samples, only 31 (2.88%) isolates could be amplified the inv A gene of which 19 could be recovered from meat vendors; 8 from egg vendors while remaining 4 from milk vendors. Though, majority of Salmonella recovered from raw foods the ready-to-eat food like chicken gravy and rasmalai also showed its presence which pose a serious public health threat. Overall, 19, 6 and 1 isolates of S. Typhimurium, S. Enteritidis and S. Typhi could be detected by PCR while remaining 5 isolates could not be amplified suggesting other type of Salmonella. Selected Salmonella isolates were completely resistance to Oxacillin (100%) followed by Cefoxitin (30.43%) and Ampicillin (26.10%). Thus, it is observed that the street vended foods of animal origin and associated environment play an important role in transmission of food borne pathogens including Salmonella .

  7. Results of growing relatively smoke resistant types of trees and their practical use. [German Democratic Republic

    Energy Technology Data Exchange (ETDEWEB)

    Tzschacksch, O.

    1985-01-01

    Achievements in cultivating sulfur dioxide resistant conifers in the German Democratic Republic are summarized. These conifers will be planted in afforestation programs in smoke damage zones I, i.e. in conifer forests at high elevations with maximum pollution damage. Nurseries with the most promising tree types have been established for harvesting seeds for propagation. Cultivation of cuttings and tree grafting is carried out in experimental nurseries along with laboratory gas treatment tests. Smoke resistant varieties of the common spruce Picae abies (L.) show vigorous growth in smoke damage zone I. Other spruce types suitable for cultivation are Picea pungens Engelm., Picea omorica (Panc.) Purk. with the highest vitality in 15 to 20 year old trial plantings in smoke damage zone I extreme, and Picea glanca, rubens and orientalis. Suitable pines are Pinus contorta Dougl. ex Loud. (Murray pine), Pinus mugo Turra, and others; resistant larches are Larix decidua and Larix leptolepis. Deciduous trees being cultivated for afforestation are aspens (Populus tremula L.) and mountain ash (Sorbus aucuparia L.). 11 references.

  8. Overweight, insulin resistance and type II diabetes in type I Gaucher disease patients in relation to enzyme replacement therapy

    NARCIS (Netherlands)

    Langeveld, M.; de Fost, M.; Aerts, J. M. F. G.; Sauerwein, H. P.; Hollak, C. E. M.

    2008-01-01

    Type I Gaucher disease, a lysosomal storage disorder is associated with metabolic abnormalities such as high resting energy expenditure, low circulating adiponectin and peripheral insulin resistance. Treatment with enzyme replacement therapy (enzyme therapy) leads to a decrease in resting energy

  9. Small ring testing of a creep resistant material

    International Nuclear Information System (INIS)

    Hyde, C.J.; Hyde, T.H.; Sun, W.; Nardone, S.; De Bruycker, E.

    2013-01-01

    Many components in conventional and nuclear power plant, aero-engines, chemical plant etc., operate at temperatures which are high enough for creep to occur. These include steam pipes, pipe branches, gas and steam turbine blades, etc. The manufacture of such components may also require welds to be part of them. In most cases, only nominal operating conditions (i.e. pressure, temperatures, system load, etc.) are known and hence precise life predictions for these components are not possible. Also, the proportion of life consumed will vary from position to position within a component. Hence, non-destructive techniques are adopted to assist in making decisions on whether to repair, continue operating or replace certain components. One such approach is to test a small sample removed from the component to make small creep test specimens which can be tested to give information on the remaining creep life of the component. When such a small sample cannot be removed from the operating component, e.g. in the case of small components, the component can be taken out of operation in order to make small creep test specimens, the results from which can then be used to assist with making decisions regarding similar or future components. This paper presents a small creep test specimen which can be used for the testing of particularly strong and creep resistant materials, such as nickel-based superalloys

  10. Vancomycin-resistant enterococci: validation of susceptibility testing and in vitro activity of novel antibiotics

    DEFF Research Database (Denmark)

    Rathe, Mathias; Lise, Kristensen,; Ellermann-Eriksen, Svend

    Vancomycin-resistant enterococci: validation of susceptibility testing and in vitro activity of novel antibiotics......Vancomycin-resistant enterococci: validation of susceptibility testing and in vitro activity of novel antibiotics...

  11. Radiation resistance of polymer materials. Degradation evaluation by accelerated testing for application condition

    International Nuclear Information System (INIS)

    Seguchi, Tadao; Tamura, Kiyotoshi; Sorimachi, Masami

    2010-02-01

    This paper presents re-evaluated radiation resistance property data of polymer materials, which had been tested in past times in TAKASAKI Quantum Beam Science Directorate, for the future study of ageing evaluation of low voltage electric cable insulation materials used in light-water nuclear reactors. The radiation resistance of 25 types of plastics and rubbers materials applied in practical environments was evaluated by the accelerated testing of gamma-ray irradiation under oxygen pressure, and was compared with the radiation resistance determined from the traditional testing by irradiation with a high dose rate in air. The polymer materials were formulated to be similar or equivalent to practical materials, and the most of formulation (chemical compounds and quantities) were described. For all materials, the tensile properties (elongation at break, ultimate strength, 100% or 200% modulus), electric resistivity, gel-fraction, and density were measured after irradiation in oxidation conditions and irradiation in air with a high dose rate (non-oxidation conditions). The data of relations between each properties and total dose at various conditions were compiled, and the relations among the changes of mechanical properties, electrical properties, and radiation induced chemical reactions were discussed. (author)

  12. Diabetic retinopathy is associated with insulin resistance and cardiovascular autonomic dysfunction in type 2 diabetic patients

    International Nuclear Information System (INIS)

    Anan, Futoshi; Takayuki, Masaki; Takahashi, Naohiko; Nakagawa, Mikiko; Eshima, Nobuoki; Saikawa, Tetsunori; Yoshimatsu, Hironobu

    2009-01-01

    Diabetic retinopathy (DR) and cardiovascular autonomic dysfunction are associated with high mortality in type 2 diabetic patients. This preliminary study was therefore designed to test the hypothesis that DR is associated with insulin resistance and cardiovascular autonomic dysfunction in type 2 diabetic patients without insulin treatment. Seventy persons were diagnosed to have type 2 diabetes in the examination from June 2004 to May 2006. The study group consisted of 29 type 2 diabetic patients with DR (age: 58±6 years, mean±standard deviation (s.d.)) and 41 type 2 diabetic patients with no DR (NDR) (n=41, 58±5 years). Cardiovascular autonomic function was assessed by baroreflex sensitivity (BRS), heart rate variability, plasma norepinephrine concentration and cardiac 123 I-metaiodobenzylguanidine (MIBG) scintigraphic findings. DR patients had lower BRS, early and delayed 123 I-MIBG myocardial uptake values and higher percent washout rate (WR) of 123 I-MIBG than the NDR patients. With respect to metabolic findings, DR patients had higher fasting plasma insulin concentration (P 123 I-MIBG (P 123 I-MIBG are independently associated with DR in Japanese patients with type 2 diabetes mellitus. (author)

  13. Molecular typing of methicillin-resistant Staphylococcus aureus: Comparison of PCR-based open reading frame typing, multilocus sequence typing, and Staphylococcus protein A gene typing.

    Science.gov (United States)

    Ogihara, Shinji; Saito, Ryoichi; Sawabe, Etsuko; Kozakai, Takahiro; Shima, Mari; Aiso, Yoshibumi; Fujie, Toshihide; Nukui, Yoko; Koike, Ryuji; Hagihara, Michio; Tohda, Shuji

    2018-04-01

    The recently developed PCR-based open reading frame typing (POT) method is a useful molecular typing tool. Here, we evaluated the performance of POT for molecular typing of methicillin-resistant Staphylococcus aureus (MRSA) isolates and compared its performance to those of multilocus sequence typing (MLST) and Staphylococcus protein A gene typing (spa typing). Thirty-seven MRSA isolates were collected between July 2012 and May 2015. MLST, spa typing, and POT were performed, and their discriminatory powers were evaluated using Simpson's index analysis. The MRSA isolates were classified into 11, 18, and 33 types by MLST, spa typing, and POT, respectively. The predominant strains identified by MLST, spa typing, and POT were ST8 and ST764, t002, and 93-191-127, respectively. The discriminatory power of MLST, spa typing, and POT was 0.853, 0.875, and 0.992, respectively, indicating that POT had the highest discriminatory power. Moreover, the results of MLST and spa were available after 2 days, whereas that of POT was available in 5 h. Furthermore, POT is rapid and easy to perform and interpret. Therefore, POT is a superior molecular typing tool for monitoring nosocomial transmission of MRSA. Copyright © 2017 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  14. Rapid detection of drug resistance and mutational patterns of extensively drug-resistant strains by a novel GenoType® MTBDRsl assay

    Directory of Open Access Journals (Sweden)

    A K Singh

    2013-01-01

    Full Text Available Background: The emergence of extensively drug-resistant tuberculosis (XDR-TB is a major concern in the India. The burden of XDR-TB is increasing due to inadequate monitoring, lack of proper diagnosis, and treatment. The GenoType ® Mycobacterium tuberculosis drug resistance second line (MTBDRsl assay is a novel line probe assay used for the rapid detection of mutational patterns conferring resistance to XDR-TB. Aim: The aim of this study was to study the rapid detection of drug resistance and mutational patterns of the XDR-TB by a novel GenoType ® MTBDRsl assay. Materials and Methods: We evaluated 98 multidrug-resistant (MDR M. tuberculosis isolates for second line drugs susceptibility testing by 1% proportion method (BacT/ALERT 3D system and GenoType ® MTBDRsl assay for rapid detection of conferring drug resistance to XDR-TB. Results: A total of seven (17.4% were identified as XDR-TB by using standard phenotypic method. The concordance between phenotypic and GenoType ® MTBDRsl assay was 91.7-100% for different antibiotics. The sensitivity and specificity of the MTBDRsl assay were 100% and 100% for aminoglycosides; 100% and 100% for fluoroquinolones; 91.7% and 100% for ethambutol. The most frequent mutations and patterns were gyrA MUT1 (A90V in seven (41.2% and gyrA + WT1-3 + MUT1 in four (23.5%; rrs MUT1 (A1401G in 11 (64.7%, and rrs WT1-2 + MUT1 in eight (47.1%; and embB MUT1B (M306V in 11 (64.7% strains. Conclusions: These data suggest that the GenoType ® MTBDRsl assay is rapid, novel test for detection of resistance to second line anti-tubercular drugs. This assay provides additional information about the frequency and mutational patterns responsible for XDR-TB resistance.

  15. A new type of resistive plate chamber: The multigap RPC

    International Nuclear Information System (INIS)

    Cerron Zeballos, E.; Crotty, I.; Hatzifotiadou, D.; Lamas Valverde, J.; Neupane, S.; Williams, M.C.S.; Zichichi, A.

    1996-01-01

    This Letter describes the multigap resistive plate chamber (RPC). The goal is to obtain a much improved time resolution, keeping the advantages of the wide gap RPC in comparison with the conventional narrow gap RPC (smaller dynamic range and thus lower charge per avalanche which gives higher rate capability and lower power dissipation in the gas gap). (orig.)

  16. A new type of resistive plate chamber the multigap RPC

    CERN Document Server

    Cerron-Zeballos, E; Hatzifotiadou, D; Lamas-Valverde, J; Neupane, S; Williams, M C S; Zichichi, Antonino

    1996-01-01

    This paper describes the multigap resistive plate chamber (RPC). The goal is to obtain a much improved time resolution, keeping the advantages of the wide gap RPC in comparison with the conventional narrow gap RPC (smaller dynamic range and thus lower charge per avalanche which gives higher rate capability and lower power dissipation in the gas gap).

  17. A comparison of in vitro tests and a faecal egg count reduction test in detecting anthelmintic resistance in horse strongyles

    DEFF Research Database (Denmark)

    Craven, J.; Bjørn, H.; Barnes, E.H.

    1999-01-01

    This study reports a comparison between faecal egg count reduction test (FECRT), egg hatch assay (EHA) and larval development assay (LDA) for detecting anthelmintic resistance in equine strongyles. Resistance to benzimidazoles was demonstrated in 33 of 42 (79%) farms tested by FECRT and in 32 (62......%) of the 52 farms tested by EHA. As the reference strain used was not fully susceptible to benzimidazoles it was not possible to determine the level of resistance by LDA. Pyrantel resistance was indicated on three of 15 farms by faecal egg count reduction. Resistance was also indicated by LDA for one...

  18. 49 CFR 173.465 - Type A packaging tests.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Type A packaging tests. 173.465 Section 173.465 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.465 Type A packaging tests. (a) The packaging...

  19. Insulin resistance in type 1 diabetes: what is ?double diabetes? and what are the risks?

    OpenAIRE

    Cleland, S. J.; Fisher, B. M.; Colhoun, H. M.; Sattar, N.; Petrie, J. R.

    2013-01-01

    In this review, we explore the concept of ‘double diabetes’, a combination of type 1 diabetes with features of insulin resistance and type 2 diabetes. After considering whether double diabetes is a useful concept, we discuss potential mechanisms of increased insulin resistance in type 1 diabetes before examining the extent to which double diabetes might increase the risk of cardiovascular disease (CVD). We then go on to consider the proposal that weight gain from intensive insulin regimens ma...

  20. Evaluation of a new test, genotype HelicoDR, for molecular detection of antibiotic resistance in Helicobacter pylori.

    Science.gov (United States)

    Cambau, Emmanuelle; Allerheiligen, Vera; Coulon, Céline; Corbel, Céline; Lascols, Christine; Deforges, Lionel; Soussy, Claude-James; Delchier, Jean-Charles; Megraud, Francis

    2009-11-01

    The eradication rate of Helicobacter pylori by standard therapy is decreasing due to antibiotic resistance, mainly to clarithromycin. Our aim was to provide a new molecular test to guide the treatment of new and relapsed cases. We first studied 126 H. pylori strains for phenotypic (MIC) and genotypic resistance to clarithromycin (rrl mutation) and levofloxacin (gyrA mutation) and then developed a DNA strip genotyping test on the basis of the correlation results and literature data. Clinical strains (n = 92) and gastric biopsy specimens containing H. pylori (n = 105) were tested blindly with the new molecular test GenoType HelicoDR. The presence of mutations or the absence of hybridization with wild-type sequences was predictive, in rrl for clarithromycin resistance in 91 cases (mostly the A2147G mutation) and in gyrA for levofloxacin resistance in 58 cases (mutations at codon 87 or 91). Genotyping revealed a mix of genotypes in 33% of the cases, reflecting a coinfection or selection for resistant mutants. The sensitivity and specificity of detecting resistance were 94% and 99% for clarithromycin and 87% and 98.5% for levofloxacin, respectively. The concordance scores were 0.96 for clarithromycin and 0.94 for levofloxacin. With global resistance rates of 46% for clarithromycin and 25% for levofloxacin, which were observed for consecutive positive biopsy specimens from 2007 and 2008, the positive and negative predictive values for detecting resistance were 99% and 94% for clarithromycin and 96% and 96% for fluoroquinolone. GenoType HelicoDR is efficient at detecting mutations predictive of antibiotic resistance in H. pylori when applied to strains or directly to gastric biopsy specimens.

  1. Resistance Training in Type 2 Diabetic Patients Improves Uric Acid Levels

    Directory of Open Access Journals (Sweden)

    R. Sousa Moisés S.S.

    2014-12-01

    Full Text Available Resistance training (RT can provide several benefits for individuals with Type 2 diabetes. The aim of this study was to investigate the effects of resistance training on the strength levels and uric acid (UA concentration in individuals with Type 2 diabetes. The study included 68 patients (57.7±9.0 years that participated in an organized program of RT for 12 weeks. The volunteers were divided into two groups: an experimental group (EG; n=34 that performed the resistance training program consisting of seven exercises executed in an alternating order based on segments; and a control group (CG; n=34 that maintained their normal daily life activities. Muscle strength and uric acid were measured both pre- and post-experiment. The results showed a significant increase in strength of the subjects in the EG for all exercises included in the study (p<0.001. Comparing the strength levels of the post-test, intergroup differences were found in supine sitting (p<0.001, leg extension (p<0.001, shoulder press (p<0.001, leg curl (p=0.001, seated row (p<0.001, leg press (p=0.001 and high pulley (p<0.001. The measured uric acid was significantly increased in both experimental and control groups (p<0.001 and p=0.001, respectively. The intergroup comparison showed a significant increase for the EG (p=0.024. We conclude that the training program was effective for strength gains despite an increase in uric acid in Type 2 diabetics.

  2. Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1982-01-01

    1.1 This test method covers the apparatus and procedure for the determination of the weight loss of carbon fibers, exposed to ambient hot air, as a means of characterizing their oxidative resistance. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units which are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard information, see Section 8.

  3. Effects of Ramadan fasting on aspirin resistance in type 2 diabetic patients.

    Science.gov (United States)

    Bouida, Wahid; Beltaief, Kaouthar; Baccouche, Houda; Sassi, Mouna; Dridi, Zohra; Trabelsi, Imen; Laaouiti, Kamel; Chakroun, Taher; Hellara, Ilhem; Boukef, Riadh; Sakly, Nabil; Hassine, Mohsen; Added, Faouzi; Razgallah, Rabie; Najjar, Fadhel; Nouira, Semir

    2018-01-01

    Ramadan fasting (RF) may affect aspirin resistance. We conducted this study in patients with cardiovascular risk (CVR) factors to assess the effect of RF on aspirin resistance and explore whether type 2 diabetes mellitus (DM) would influence this effect. A total of 177 stable patients with ≥2 CVR factors were recruited. All patients observed RF and were taking aspirin. Physical exam and standard biological tests including glycaemia and serum lipids data were performed before Ramadan (Pre-R), at the last week of Ramadan (R) and four weeks after the end of Ramadan (Post-R). In the same visits caloric intake was calculated and platelet reactivity to aspirin was assessed using Verify Now point-of-care assay. In the overall population, there was no significant change in absolute aspirin reaction unit (ARU) values and in metabolic parameters. In DM patients (n = 127), ARU change from Pre-R values was+19.7 (p = 0.01) and +14.4 (p = 0.02) respectively at R and Post-R. During Ramadan, glycaemia, triglycerides, and cholesterol levels increased significantly and returned to Pre-R values thereafter. These changes were not observed in non-DM patients. During RF aspirin resistance increased only in DM patients. This effect persisted one month after Ramadan. Simultaneous alteration of glycemic control and increase of serum lipids levels could potentially be a favorable factor. The protocol was registered at clinicaltrials.gov under: NCT02720133.

  4. Effects of Ramadan fasting on aspirin resistance in type 2 diabetic patients

    Science.gov (United States)

    Bouida, Wahid; Beltaief, Kaouthar; Baccouche, Houda; Sassi, Mouna; Dridi, Zohra; Trabelsi, Imen; Laaouiti, Kamel; Chakroun, Taher; Hellara, Ilhem; Boukef, Riadh; Sakly, Nabil; Hassine, Mohsen; Added, Faouzi; Razgallah, Rabie; Najjar, Fadhel; Nouira, Semir

    2018-01-01

    Aims Ramadan fasting (RF) may affect aspirin resistance. We conducted this study in patients with cardiovascular risk (CVR) factors to assess the effect of RF on aspirin resistance and explore whether type 2 diabetes mellitus (DM) would influence this effect. Methods A total of 177 stable patients with ≥2 CVR factors were recruited. All patients observed RF and were taking aspirin. Physical exam and standard biological tests including glycaemia and serum lipids data were performed before Ramadan (Pre-R), at the last week of Ramadan (R) and four weeks after the end of Ramadan (Post-R). In the same visits caloric intake was calculated and platelet reactivity to aspirin was assessed using Verify Now point-of-care assay. Results In the overall population, there was no significant change in absolute aspirin reaction unit (ARU) values and in metabolic parameters. In DM patients (n = 127), ARU change from Pre-R values was+19.7 (p = 0.01) and +14.4 (p = 0.02) respectively at R and Post-R. During Ramadan, glycaemia, triglycerides, and cholesterol levels increased significantly and returned to Pre-R values thereafter. These changes were not observed in non-DM patients. Conclusions During RF aspirin resistance increased only in DM patients. This effect persisted one month after Ramadan. Simultaneous alteration of glycemic control and increase of serum lipids levels could potentially be a favorable factor. Study registration The protocol was registered at clinicaltrials.gov under: NCT02720133. PMID:29529091

  5. Radiation-resistance test on optical fiber for artificial satellite

    International Nuclear Information System (INIS)

    Morita, Yosuke; Seguchi, Tadao; Mori, Tatsuo; Miyaji, Yuji.

    1985-01-01

    Radiation resistance of a prototype optical fiber for use in artificial satellites is investigated under a long-term irradiation of gamma rays at relatively low dose rates. The optical fiber tested is composed of a pure silica core and an F-doped cladding. Various aspects of the relations between induced loss and irradiation time are observed and results obtained are discussed. It is generally accepted that a satellite and its equipment should be resistant to a total dose of about 1 x 10 6 rad. In the present test, accordingly, gamma ray irradiation is performed up to a total dose of 1 x 10 6 rad at a dose rate of 1 x 10 4 rad/h (for 100 h), 3 x 10 3 rad/h (333 h) and 1 x 10 3 rad/h (1000 h), and it is shown that the loss induced in this fiber at these dose rates is 23.6 - 27.2, 16.9 - 21.6 and 12.5 - 13.5 dB/km, respectively. On the other hand, it has been reported that the loss induced at the dose rate of 1 x 10 6 rad/h (1 h) is about 600 dB/km, which is much larger than the above values. From these results, the loss at a dose rate of 100 rad/h, which would be expected in a satellite, is estimated at about 10 dB/km. It is concluded that this prototype fiber has a sufficient capability for satellite use with respect to induced loss. (Nogami, K.)

  6. Fire Resistance Tests of Various Fire Protective Coatings

    Directory of Open Access Journals (Sweden)

    Mindaugas GRIGONIS

    2011-03-01

    Full Text Available Tests were carried out on more than 14 different samples of fire protective coatings in order to investigate a relation between the thickness of the intumescent fire protection coating and the time of exposure to heat. A number of coatings of different chemical composition enabled to determine the fire resistance behaviour patterns. During test the one-side and volumetric methods were employed in observance of the standard temperature-time curves. For one-side method, the coating was applied on one side and all edges of the specimen, whereas for volumetric test the specimens were completely covered with fire protective coating. It is shown that a layer of coating protects the specimen's surface from heat exposure for a certain period of time until full oxidation of the coating occurs. The efficiency of fire protective coatings also depends on thickness of the charred layer of the side exposed to heat.http://dx.doi.org/10.5755/j01.ms.17.1.257

  7. High frequency of multidrug-resistant Staphylococcus aureus with SCCmec type III and Spa types t037 and t631 isolated from burn patients in southwest of Iran.

    Science.gov (United States)

    Parhizgari, Najmeh; Khoramrooz, Seyed Sajjad; Malek Hosseini, Seyed Ali Asghar; Marashifard, Masoud; Yazdanpanah, Mahboobeh; Emaneini, Mohammad; Gharibpour, Farzaneh; Mirzaii, Mehdi; Darban-Sarokhalil, Davood; Moein, Masoud; Naraki, Mahmood

    2016-03-01

    Methicilin resistance Staphylococcus aureus (MRSA) infections are the major challenges in hospitals, especially in the burn units. The use of molecular typing methods is essential for tracking the spread of S. aureus infection and epidemiological investigations. The aim of this study was to find the profile of the spa types and also the prevalence of each SCCmec type of S. aureus strains in a central burn hospital in southwest of Iran. A total of 81 non-duplicate S. aureus were isolated from burn patients between April 2011 and February 2012. The susceptibility of the isolates against 13 different antibiotics was tested by disk agar diffusion (DAD) method. MRSA strains were identified by amplification of mecA gene. Multiplex-polymerase chain reaction (PCR) technique was used to determine the SCCmec types of MRSA strains and all the S. aureus isolates were typed by spa typing method. Detection of mecA gene showed that 70 (86.4%) of the isolates were MRSA. The highest rate of resistance was observed for penicillin (97.5%) and erythromycin (77.8%). None of the isolates were resistant to vancomycin. Sixty-seven of the 70 MRSA isolates harbored only SCCmec type III and three untypeable isolates. Five different spa types were detected. The most common spa types were t037 (42.5%) and t631 (34.5%) and were only found in MRSA isolates. Only SCCmec type III was found in burn patients which emphasizes the HA-MRSA origin of these strains. Only five different spa types identified in this study are in accordance with one SCCmec type which indicates that a limited number of bacterial colons are circulated in the burn unit in this hospital. © 2015 APMIS. Published by John Wiley & Sons Ltd.

  8. A PGC-1α- and muscle fibre type-related decrease in markers of mitochondrial oxidative metabolism in skeletal muscle of humans with inherited insulin resistance

    DEFF Research Database (Denmark)

    Kristensen, Jonas Møller; Skov, Vibe; Petersson, Stine Juhl

    2014-01-01

    Insulin resistance in obesity and type 2 diabetes is related to abnormalities in mitochondrial oxidative phosphorylation (OxPhos) in skeletal muscle. We tested the hypothesis that mitochondrial oxidative metabolism is impaired in muscle of patients with inherited insulin resistance and defective...

  9. 42 CFR 84.161 - Man test for gases and vapors; Type B and Type BE respirators; test requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Man test for gases and vapors; Type B and Type BE respirators; test requirements. 84.161 Section 84.161 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...

  10. 42 CFR 84.160 - Man test for gases and vapors; Type A and Type AE respirators; test requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Man test for gases and vapors; Type A and Type AE respirators; test requirements. 84.160 Section 84.160 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...

  11. Predictions of fire behavior and resistance to control: for use with photo series for the ponderosa pine type, ponderosa pine and associated species type, and lodgepole pine type.

    Science.gov (United States)

    Franklin R. Ward; David V. Sandberg

    1981-01-01

    This publication presents tables on the behavior of fire and the resistance of fuels to control. The information is to be used with the publication, "Photo Series for Quantifying Forest Residues in the Ponderosa Pine Type, Ponderosa Pine and Associated Species Type, Lodgepole Pine Type" (Maxwell, Wayne G.; Ward, Franklin R. 1976. Gen. Tech. Rep. PNW-GTR-052....

  12. Insulin resistance and neurodegeneration: Roles of obesity, type 2 diabetes mellitus and non-alcoholic steatohepatitis

    OpenAIRE

    de la Monte, Suzanne M; Longato, Lisa; Tong, Ming; Wands, Jack R

    2009-01-01

    Recent studies have linked obesity, type 2 diabetes mellitus (T2DM) or non-alcoholic steatohepatitis (NASH) to insulin resistance in the brain, cognitive impairment and neurodegeneration. Insulin resistance compromises cell survival, metabolism and neuronal plasticity, and increases oxidative stress, cytokine activation and apoptosis. T2DM/NASH has been demonstrated to be associated with increased ceramide generation, suggesting a mechanistic link between peripheral insulin resistance and neu...

  13. Molecular Typing and Antimicrobial Susceptibility of Methicillin-Resistant Staphylococcus aureus Isolated from Bovine Milk in Tanzania.

    Science.gov (United States)

    Mohammed, Jibril; Ziwa, Michael Henry; Hounmanou, Yaovi Mahuton Gildas; Kisanga, Adela; Tuntufye, Huruma Nelwike

    2018-01-01

    Methicillin-resistant Staphylococcus aureus (MRSA) in raw milk can be transmitted from animals to humans, and in Tanzania raw milk is sold in local markets and consumed as purchased. This study was performed to determine the molecular characteristics and antimicrobial susceptibility pattern of MRSA strains isolated from raw bovine milk sold at local markets in Tanzania. A total of 117 raw milk samples were cultured on Baird-Parker medium to isolate S. aureus and PCR was used for amplification of gltB gene for S. aureus identification and the presence of mecA gene for methicillin-resistant strains. Coagulase-negative (CN) S. aureus were reconfirmed using tube coagulase, DNase, and API Staph tests. MRSA isolates were spa typed whereas antimicrobial susceptibility testing was performed by the disc diffusion method. Forty-six coagulase positives (CP) and two CN S. aureus were identified. Most strains were resistant to penicillin (72%), and 3 isolates: 2 CN S. aureus and 1 coagulase-negative Staphylococci (CNS), were phenotypically resistant to vancomycin, oxacillin, and cefoxitin and were confirmed to carry mecA. Resistance to clindamycin, trimethoprim-sulfamethoxazole, and tetracycline was 23.9%, 30.4%, and 41.3%, respectively. Twelve isolates exhibited multidrug resistance; however, only one mecA positive strain among the three was typeable and belonged to spa type t2603. This study reports for the first time the presence of CN variant of MRSA, which was assigned the spa type t2603, and the presence of multidrug resistant S. aureus isolates from bovine milk in Morogoro, Tanzania.

  14. Effects of Resistance Training on Serum Level of Reproductive Hormones and Sperm Parameters in Type 2 Diabetes Rats

    Directory of Open Access Journals (Sweden)

    Mohammad Parastesh

    2016-11-01

    Full Text Available Abstract Background: Diabetes mellitus is associated with reductions in fertility indices. Resistance training, on the other hand, through reducing the adverse effects of diabetes, exerts a positive impact on diabetic individuals. The aim of the present study was to examine the effects of ten weeks of resistance training on serum levels of reproductive hormones and sperm parameters in Wistar rats with diabetes mellitus type 2. Materials and Methods:In this experimental study, 36 Wistar rats with mean weight of 200±50 were ran-domly assigned to healthy control, diabetic control and diabetic training groups. The diabetic resistance training group received ten weeks of resistance training (climbing up the ladder following the induction of diabetes. Twenty-four hours after the last training session, left epididymis of the rats was examined for studying sperm parameters and blood serum samples were examined for evaluating reproductive hormones. Data were analyzed using one-way ANOVA and Turkey’s Post Hoc test at 0.05%. Results: Ten weeks of resistance training induced significant increases in serum testosterone and FSH levels in the resistance training group in comparison to the diabetic group (p<0.007.Resistance training did not have any significant effects on serum LH levels in the resistance training group compared to the diabetic control group. In ad-dition, sperm parameters (sperm count, survival rate and motility presented significant improvements compared to the diabetic group(p<0.05. Conclusion: Resistance training can improve sperm parameters, including sperm count, survival rate and motility, through increasing serum testosterone, LH and FSH levels (reproductive hormones in rats with diabetes mellitus type 2.

  15. 30 CFR 7.408 - Test for flame resistance of signaling cables.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test for flame resistance of signaling cables..., Signaling Cables, and Cable Splice Kits § 7.408 Test for flame resistance of signaling cables. (a) Test... either and support and the center support. (6) After subjecting the test specimen to external flame for...

  16. Loci and candidate genes conferring resistance to soybean cyst nematode HG type 2.5.7.

    Science.gov (United States)

    Zhao, Xue; Teng, Weili; Li, Yinghui; Liu, Dongyuan; Cao, Guanglu; Li, Dongmei; Qiu, Lijuan; Zheng, Hongkun; Han, Yingpeng; Li, Wenbin

    2017-06-14

    Soybean (Glycine max L. Merr.) cyst nematode (SCN, Heterodera glycines I,) is a major pest of soybean worldwide. The most effective strategy to control this pest involves the use of resistant cultivars. The aim of the present study was to investigate the genome-wide genetic architecture of resistance to SCN HG Type 2.5.7 (race 1) in landrace and elite cultivated soybeans. A total of 200 diverse soybean accessions were screened for resistance to SCN HG Type 2.5.7 and genotyped through sequencing using the Specific Locus Amplified Fragment Sequencing (SLAF-seq) approach with a 6.14-fold average sequencing depth. A total of 33,194 SNPs were identified with minor allele frequencies (MAF) over 4%, covering 97% of all the genotypes. Genome-wide association mapping (GWAS) revealed thirteen SNPs associated with resistance to SCN HG Type 2.5.7. These SNPs were distributed on five chromosomes (Chr), including Chr7, 8, 14, 15 and 18. Four SNPs were novel resistance loci and nine SNPs were located near known QTL. A total of 30 genes were identified as candidate genes underlying SCN resistance. A total of sixteen novel soybean accessions were identified with significant resistance to HG Type 2.5.7. The beneficial alleles and candidate genes identified by GWAS might be valuable for improving marker-assisted breeding efficiency and exploring the molecular mechanisms underlying SCN resistance.

  17. Understanding the role of type 1 interferon in resistance to cancer ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Chemotherapy is the main form of treatment for cancer, but it cannot cure most types of cancer. Another form of treatment is immunotherapy, which aims to stimulate cells of the body's immune system (T cells) to kill cancer cells. Unfortunately, cancers may become resistant to T cells in the same way they learned to resist ...

  18. Insulin and fiber type in the offspring of T2DM subjects with resistance training and detraining

    DEFF Research Database (Denmark)

    Schofield, Katherine L; Rehrer, Nancy J; Perry, Tracy L

    2012-01-01

    Effects of resistance training and detraining on glucose and insulin responses to an oral glucose load, muscle fiber type, and muscular performance in the offspring of those with type 2 diabetes (familial insulin resistant (FIR)) were investigated....

  19. Insulin resistance and serum parameters of iron status in type 2 diabetics

    International Nuclear Information System (INIS)

    Zafar, U.

    2011-01-01

    Background: Type 2 diabetes mellitus (T2DM) is a predominant public health concern worldwide, accounting for 90% of the cases of diabetes globally. Pathogenesis of T2DM involves insulin resistance, defective insulin secretion and increased glucose production by the liver. Subclinical haemochromatosis has been considered as one of the probable causes of insulin resistance and diabetes mellitus. The aim of this study was to determine and correlate insulin resistance and serum parameters of iron status (serum ferritin and transferrin saturation) in type 2 diabetics. Methods: It was a correlational study. This study was conducted on sixty male patients with type 2 diabetes mellitus. Fasting blood sample was taken from each subject and analysed for glucose, haemoglobin, insulin, iron, Total Iron Binding Capacity (TIBC) and ferritin. Insulin resistance was determined by HOMA-IR index. Transferrin saturation was calculated from serum iron and TIBC. Data was analysed using SPSS-17. Results: There was significant positive correlation between insulin resistance and transferrin saturation, but there was no significant correlation of insulin resistance with blood haemoglobin, serum iron and serum ferritin in type 2 diabetics. Conclusion: Correlation between insulin resistance and transferrin saturation reveals that iron has negative impact on insulin sensitivity in type 2 diabetics. (author)

  20. Fine typing of methicillin-resistant Staphylococcus aureus isolates using direct repeat unit and staphylococcal interspersed repeat unit typing methods.

    Science.gov (United States)

    Ho, Cheng-Mao; Ho, Mao-Wang; Li, Chi-Yuan; Lu, Jang-Jih

    2015-08-01

    Methicillin-resistant Staphylococcus aureus (MRSA) typing is an important epidemiologic tool for monitoring trends and preventing outbreaks. However, the efficiency of various MRSA typing methods for each SCCmec MRSA isolate is rarely evaluated. A total of 157 MRSA isolates from four different regions in Taiwan were typed with five different molecular methods, including SCCmec typing, multilocus sequence typing (MLST), spa typing, mec-associated direct repeat unit (dru) copy number determination, and staphylococcal interspersed repeat unit (SIRU) profiling. There were four SCCmec types, eight MLST types, 15 spa types, 11 dru types, and 31 SIRU profiles. The most common type determined by each molecular typing method was SCCmec III (115 isolates, 73.2%), ST239 (99 isolates, 63.1%), t037 (107 isolates, 68.2%), 14 dru copies (76 isolates, 48.4%), and SIRU profile 3013722 (102 isolates, 65%), respectively. When using the combination of MLST, spa typing, and dru copy number, ST5-t002-4 (n = 8), ST239-t037-14 (n = 68), ST59-t437-9 (n = 9), and ST59-t437-11 (n = 6) were found to be the most common types of SCCmec types II (n = 9), III (n = 115), IV (n = 21), and VT (n = 11) isolates, respectively. SCCmec type III isolates were further classified into 11 dru types. Of the 21 SCCmec type IV isolates, 14 SIRU profiles were found. Seven SIRU patterns were observed in the 11 SCCmec type VT isolates. Different typing methods showed a similar Hunter-Gaston discrimination index among the 157 MRSA isolates. However, dru and SIRU typing methods had a better discriminatory power for SCCmec type III and SCCmec types IV and VT isolates, respectively, suggesting that dru and SIRU can be used to further type these isolates. Copyright © 2013. Published by Elsevier B.V.

  1. Typing of Staphylococcus aureus in order to determine the spread of drug resistant strains inside and outside hospital environment.

    Science.gov (United States)

    Pobiega, Monika; Wójkowska-Mach, Jadwiga; Heczko, Piotr B

    2013-01-01

    Staphylococcus aureus is one of the most important etiological factors of both nosocomial and community-acquired infections. Multidrug-resistant S. aureus is frequently isolated nowadays. Antibiotics used on the hospital ward exert a selective pressure on the strains and favor resistant strains. Multidrug-resistant and highly virulent strains can spread not only within the hospital but also between hospitals. Numerous studies show a predominance of one clone on a specific territory. The spread of such dangerous clones to neighboring countries and the entire continent is possible. Typing methods are very useful in infection control and prevention. Modern methods which are based on sequencing are necessary in rationalizing of infection control programs. Typing of Staphylococcus aureus includes methods that allow to determine the spread of drug-resistant pathogens. 'Gold standard' is pulsed-field gel electrophoresis (PFGE), which relies on separating the DNA fragments after restriction cutting. MLST (Multi Locus Sequence Typing) is based on a comparison of"housekeeping" gene sequences controlling the basic cell functions. With the MLST method, it is possible to demonstrate a broad, international spread of the specific clones. However, for epidemiological investigations, MLST seems to be too time-consuming and expensive to be used as a basic typing tool. The complementary method is spa typing, based on the sequencing of short repetitive sequences of the polymorphic X region from the gene encoding protein A. This method can be used for studying molecular evolution of S. aureus, as well as for testing for hospital outbreaks. It is faster and cheaper than MLST. It is also necessary to subtype the elements responsible for methycillin resistance (SCCmec), which allows to distinguish MRSA (Methicillin-resistant Staphylococcus aureus) clones with a common ancestor, but different epidemiological origin. All of those methods have their specific advantages and disadvantages and

  2. Simple PCR assays improve the sensitivity of HIV-1 subtype B drug resistance testing and allow linking of resistance mutations.

    Directory of Open Access Journals (Sweden)

    Jeffrey A Johnson

    Full Text Available BACKGROUND: The success of antiretroviral therapy is known to be compromised by drug-resistant HIV-1 at frequencies detectable by conventional bulk sequencing. Currently, there is a need to assess the clinical consequences of low-frequency drug resistant variants occurring below the detection limit of conventional genotyping. Sensitive detection of drug-resistant subpopulations, however, requires simple and practical methods for routine testing. METHODOLOGY: We developed highly-sensitive and simple real-time PCR assays for nine key drug resistance mutations and show that these tests overcome substantial sequence heterogeneity in HIV-1 clinical specimens. We specifically used early wildtype virus samples from the pre-antiretroviral drug era to measure background reactivity and were able to define highly-specific screening cut-offs that are up to 67-fold more sensitive than conventional genotyping. We also demonstrate that sequencing the mutation-specific PCR products provided a direct and novel strategy to further detect and link associated resistance mutations, allowing easy identification of multi-drug-resistant variants. Resistance mutation associations revealed in mutation-specific amplicon sequences were verified by clonal sequencing. SIGNIFICANCE: Combined, sensitive real-time PCR testing and mutation-specific amplicon sequencing provides a powerful and simple approach that allows for improved detection and evaluation of HIV-1 drug resistance mutations.

  3. A simplified multiplex PCR assay for fast and easy discrimination of globally distributed staphylococcal cassette chromosome mec types in meticillin-resistant Staphylococcus aureus.

    Science.gov (United States)

    Ghaznavi-Rad, Ehsanollah; Nor Shamsudin, Mariana; Sekawi, Zamberi; van Belkum, Alex; Neela, Vasanthakumari

    2010-10-01

    A multiplex PCR assay was developed for the identification of major types and subtypes of staphylococcal cassette chromosome mec (SCCmec) in meticillin-resistant Staphylococcus aureus (MRSA) strains. The method uses a novel 9 valent multiplex PCR plus two primer pairs for S. aureus identification and detection of meticillin resistance. All 389 clinical MRSA isolates from Malaysia and 18 European isolates from the Harmony collection harbouring different SCCmec types that we tested were correctly characterized by our PCR assay. SCCmec type III and V were by far the most common types among both hospital- and community-acquired Malaysian MRSA isolates, with an apparent emergence of MRSA harbouring the IVh type.

  4. Metabolomics: Insulin Resistance and Type 2 Diabetes Mellitus

    Science.gov (United States)

    Type 2 diabetes mellitus (T2DM) develops over many years, providing an opportunity to consider early prognostic tools that guide interventions to thwart disease. Advancements in analytical chemistry enable quantitation of hundreds of metabolites in biofluids and tissues (metabolomics), providing in...

  5. Nanoscale Cross-Point Resistive Switching Memory Comprising p-Type SnO Bilayers

    KAUST Repository

    Hota, Mrinal Kanti

    2015-02-23

    Reproducible low-voltage bipolar resistive switching is reported in bilayer structures of p-type SnO films. Specifically, a bilayer homojunction comprising SnOx (oxygen-rich) and SnOy (oxygen-deficient) in nanoscale cross-point (300 × 300 nm2) architecture with self-compliance effect is demonstrated. By using two layers of SnO film, a good memory performance is obtained as compared to the individual oxide films. The memory devices show resistance ratio of 103 between the high resistance and low resistance states, and this difference can be maintained for up to 180 cycles. The devices also show good retention characteristics, where no significant degradation is observed for more than 103 s. Different charge transport mechanisms are found in both resistance states, depending on the applied voltage range and its polarity. The resistive switching is shown to originate from the oxygen ion migration and subsequent formation/rupture of conducting filaments.

  6. Association between phage types and antimicrobial resistance among bovine isolates of Staphylococcus aureus in 10 countries

    DEFF Research Database (Denmark)

    Vintov, J.; Aarestrup, Frank Møller; Zinn, C. E.

    2003-01-01

    This study was conducted to investigate the diversity of phage types and associations between penicillin resistance and phage types among 815 Staphylococcus aureus isolates from bovine mastitis in nine European countries and USA. All isolates were examined for susceptibility to antimicrobial agents...... associated with penicillin resistance in contrast to phage group I (P = 0.0023) and phage complex-80 (P = 0.0066). This study confirms that a large number of phage types of S. aureus cause bovine mastitis, but that some types predominate. In addition, these findings could indicate that the use of penicillin...... in the bovine environment has selected for specific types of S. aureus in countries with a high frequency of resistance. (C) 2003 Elsevier B.V. All rights reserved....

  7. Association between phage types and antimicrobial resistance among bovine Staphylococcus aureus from 10 countries

    DEFF Research Database (Denmark)

    Vintov, J.; Aarestrup, Frank Møller; Zinn, C. E.

    2003-01-01

    This study was conducted to investigate the diversity of phage types and associations between penicillin resistance and phage types among 815 Staphylococcus aureus isolates from bovine mastitis in nine European countries and USA. All isolates were examined for susceptibility to antimicrobial agents...... associated with penicillin resistance in contrast to phage group I (P = 0.0023) and phage complex-80 (P = 0.0066). This study confirms that a large number of phage types of S. aureus cause bovine mastitis, but that some types predominate. In addition, these findings could indicate that the use of penicillin...... in the bovine environment has selected for specific types of S. aureus in countries with a high frequency of resistance....

  8. SCCmec type IX element in Methicillin resistant Staphylococcus aureus spa-type t337 (CC9 isolated from pigs and pork in Thailand

    Directory of Open Access Journals (Sweden)

    Martin eVestergaard

    2012-03-01

    Full Text Available Methicillin resistant Staphylococcus aureus (MRSA have emerged among livestock in several countries. In this study, we describe the results of a screening performed in pigs and raw pork samples in Thailand. Ten pork samples and 15 nasal swabs from pigs were collected from two markets and one pig farm in the Samuth Songkhram province in Thailand. MRSA were isolated using selective isolation procedures and confirmed by mecA PCR. The MRSA were characterized by antimicrobial susceptibility testing, PFGE, spa typing, SCCmec typing, and MLST. Resistance and virulence markers were screened using a microarray. Five of the pork samples and six pig nasal swabs were positive for MRSA. All 11 isolates belonged to spa type t337 and CC9 but showed diversity in antimicrobial resistance patterns and PFGE profiles. All isolates harbored SCCmec IX and were resistant to seven out of 14 tested antimicrobials; additional resistances were found in the pork isolates. Microarray analysis identified blaZ, aac-aphD, vga(A, tetM, and a tet efflux marker, in all strains and additionally ermB and aadD, cat and fex(A in the pork isolates. None of the isolates were found PVL-positive, but enterotoxins were identified in all isolates. This is, to our knowledge, the first description of MRSA in livestock and food products in Thailand and also the first observation of MRSA CC9 associated with SCCmec IX. This study indicates a likely widespread distribution of MRSA in pig and pork in Thailand and further investigation on the prevalence and importance of livestock associated MRSA in Thailand is needed.

  9. Resistive Switching of Ta2O5-Based Self-Rectifying Vertical-Type Resistive Switching Memory

    Science.gov (United States)

    Ryu, Sungyeon; Kim, Seong Keun; Choi, Byung Joon

    2018-01-01

    To efficiently increase the capacity of resistive switching random-access memory (RRAM) while maintaining the same area, a vertical structure similar to a vertical NAND flash structure is needed. In addition, the sneak-path current through the half-selected neighboring memory cell should be mitigated by integrating a selector device with each RRAM cell. In this study, an integrated vertical-type RRAM cell and selector device was fabricated and characterized. Ta2O5 as the switching layer and TaOxNy as the selector layer were used to preliminarily study the feasibility of such an integrated device. To make the side contact of the bottom electrode with active layers, a thick Al2O3 insulating layer was placed between the Pt bottom electrode and the Ta2O5/TaOxNy stacks. Resistive switching phenomena were observed under relatively low currents (below 10 μA) in this vertical-type RRAM device. The TaOxNy layer acted as a nonlinear resistor with moderate nonlinearity. Its low-resistance-state and high-resistance-state were well retained up to 1000 s.

  10. Associations of vitamin D with insulin resistance, obesity, type 2 diabetes, and metabolic syndrome.

    Science.gov (United States)

    Wimalawansa, Sunil J

    2018-01-01

    The aim of this study is to determine the relationships of vitamin D with diabetes, insulin resistance obesity, and metabolic syndrome. Intra cellular vitamin D receptors and the 1-α hydroxylase enzyme are distributed ubiquitously in all tissues suggesting a multitude of functions of vitamin D. It plays an indirect but an important role in carbohydrate and lipid metabolism as reflected by its association with type 2 diabetes (T2D), metabolic syndrome, insulin secretion, insulin resistance, polycystic ovarian syndrome, and obesity. Peer-reviewed papers, related to the topic were extracted using key words, from PubMed, Medline, and other research databases. Correlations of vitamin D with diabetes, insulin resistance and metabolic syndrome were examined for this evidence-based review. In addition to the well-studied musculoskeletal effects, vitamin D decreases the insulin resistance, severity of T2D, prediabetes, metabolic syndrome, inflammation, and autoimmunity. Vitamin D exerts autocrine and paracrine effects such as direct intra-cellular effects via its receptors and the local production of 1,25(OH) 2 D 3 , especially in muscle and pancreatic β-cells. It also regulates calcium homeostasis and calcium flux through cell membranes, and activation of a cascade of key enzymes and cofactors associated with metabolic pathways. Cross-sectional, observational, and ecological studies reported inverse correlations between vitamin D status with hyperglycemia and glycemic control in patients with T2D, decrease the rate of conversion of prediabetes to diabetes, and obesity. However, no firm conclusions can be drawn from current studies, because (A) studies were underpowered; (B) few were designed for glycemic outcomes, (C) the minimum (or median) serum 25(OH) D levels achieved are not measured or reported; (D) most did not report the use of diabetes medications; (E) some trials used too little (F) others used too large, unphysiological and infrequent doses of vitamin D; and

  11. Prediction of clinical response to drugs in ovarian cancer using the chemotherapy resistance test (CTR-test).

    Science.gov (United States)

    Kischkel, Frank Christian; Meyer, Carina; Eich, Julia; Nassir, Mani; Mentze, Monika; Braicu, Ioana; Kopp-Schneider, Annette; Sehouli, Jalid

    2017-10-27

    In order to validate if the test result of the Chemotherapy Resistance Test (CTR-Test) is able to predict the resistances or sensitivities of tumors in ovarian cancer patients to drugs, the CTR-Test result and the corresponding clinical response of individual patients were correlated retrospectively. Results were compared to previous recorded correlations. The CTR-Test was performed on tumor samples from 52 ovarian cancer patients for specific chemotherapeutic drugs. Patients were treated with monotherapies or drug combinations. Resistances were classified as extreme (ER), medium (MR) or slight (SR) resistance in the CTR-Test. Combination treatment resistances were transformed by a scoring system into these classifications. Accurate sensitivity prediction was accomplished in 79% of the cases and accurate prediction of resistance in 100% of the cases in the total data set. The data set of single agent treatment and drug combination treatment were analyzed individually. Single agent treatment lead to an accurate sensitivity in 44% of the cases and the drug combination to 95% accuracy. The detection of resistances was in both cases to 100% correct. ROC curve analysis indicates that the CTR-Test result correlates with the clinical response, at least for the combination chemotherapy. Those values are similar or better than the values from a publication from 1990. Chemotherapy resistance testing in vitro via the CTR-Test is able to accurately detect resistances in ovarian cancer patients. These numbers confirm and even exceed results published in 1990. Better sensitivity detection might be caused by a higher percentage of drug combinations tested in 2012 compared to 1990. Our study confirms the functionality of the CTR-Test to plan an efficient chemotherapeutic treatment for ovarian cancer patients.

  12. Parallel screening of wild-type and drug-resistant targets for anti-resistance neuraminidase inhibitors.

    Directory of Open Access Journals (Sweden)

    Kai-Cheng Hsu

    Full Text Available Infection with influenza virus is a major public health problem, causing serious illness and death each year. Emergence of drug-resistant influenza virus strains limits the effectiveness of drug treatment. Importantly, a dual H275Y/I223R mutation detected in the pandemic influenza A 2009 virus strain results in multidrug resistance to current neuraminidase (NA drugs. Therefore, discovery of new agents for treating multiple drug-resistant (MDR influenza virus infections is important. Here, we propose a parallel screening strategy that simultaneously screens wild-type (WT and MDR NAs, and identifies inhibitors matching the subsite characteristics of both NA-binding sites. These may maintain their potency when drug-resistant mutations arise. Initially, we analyzed the subsite of the dual H275Y/I223R NA mutant. Analysis of the site-moiety maps of NA protein structures show that the mutant subsite has a relatively small volume and is highly polar compared with the WT subsite. Moreover, the mutant subsite has a high preference for forming hydrogen-bonding interactions with polar moieties. These changes may drive multidrug resistance. Using this strategy, we identified a new inhibitor, Remazol Brilliant Blue R (RB19, an anthraquinone dye, which inhibited WT NA and MDR NA with IC(50 values of 3.4 and 4.5 µM, respectively. RB19 comprises a rigid core scaffold and a flexible chain with a large polar moiety. The former interacts with highly conserved residues, decreasing the probability of resistance. The latter forms van der Waals contacts with the WT subsite and yields hydrogen bonds with the mutant subsite by switching the orientation of its flexible side chain. Both scaffolds of RB19 are good starting points for lead optimization. The results reveal a parallel screening strategy for identifying resistance mechanisms and discovering anti-resistance neuraminidase inhibitors. We believe that this strategy may be applied to other diseases with high

  13. Tetracycline consumption and occurrence of tetracycline resistance in Salmonella typhimurium phage types from Danish pigs

    DEFF Research Database (Denmark)

    Emborg, Hanne-Dorthe; Vigre, Håkan; Jensen, Vibeke Frøkjær

    2007-01-01

    more than doubled at the national level from 12,000-13,000 kg of active compound in 1996-1998 to 29,000 kg of active compound in 2004. Instead, tetracycline-resistant S. Typhimurium phage types became more prevalent. This suggests that the spread of already established or new resistant clones, rather......The aims of the present study were to investigate at the farm-owner level the effect of prescribed tetracycline consumption in pigs and different Salmonella Typhimurium phage types on the probability that the S. Typhimurium was resistant to tetracycline. In this study, 1,307 isolates were included......, originating from 877 farm owners, and data were analyzed using logistic regression. The analysis showed that both the S. Typhimurium phage type (p type...

  14. Qualification tests for a type B (U) package

    International Nuclear Information System (INIS)

    Vieru, G.

    2004-01-01

    The primary objective for the safety of radioactive materials transport is to protect human health and the environment taking into consideration its potential risks and radiological consequences. Romania as a Member State of the International Atomic Energy Agency has implemented national regulations for the safe transport of radioactive materials (RAM) in accordance with the Agency's recommendations as well as other international specialized organizations. The paper will describe the qualification tests performed for a type B (U) package, intended to be used for the transport of the radioactive sources Am-241 and Cs-137. For this kind of package the tests were performed the first time in Romania and include: the water spray test, the 1.2 m free drop test, the stacking test, the penetration test, the 9m free drop test, the thermal test and the submersion under a head of water of at least 15 m. The test facilities used for performing qualification tests for the type B (U) package as well as experience and conclusions will be also presented

  15. Neisseria gonorrhoeae Sequence Typing for Antimicrobial Resistance, a Novel Antimicrobial Resistance Multilocus Typing Scheme for Tracking Global Dissemination of N. gonorrhoeae Strains.

    Science.gov (United States)

    Demczuk, W; Sidhu, S; Unemo, M; Whiley, D M; Allen, V G; Dillon, J R; Cole, M; Seah, C; Trembizki, E; Trees, D L; Kersh, E N; Abrams, A J; de Vries, H J C; van Dam, A P; Medina, I; Bharat, A; Mulvey, M R; Van Domselaar, G; Martin, I

    2017-05-01

    A curated Web-based user-friendly sequence typing tool based on antimicrobial resistance determinants in Neisseria gonorrhoeae was developed and is publicly accessible (https://ngstar.canada.ca). The N. gonorrhoeae Sequence Typing for Antimicrobial Resistance (NG-STAR) molecular typing scheme uses the DNA sequences of 7 genes ( penA , mtrR , porB , ponA , gyrA , parC , and 23S rRNA) associated with resistance to β-lactam antimicrobials, macrolides, or fluoroquinolones. NG-STAR uses the entire penA sequence, combining the historical nomenclature for penA types I to XXXVIII with novel nucleotide sequence designations; the full mtrR sequence and a portion of its promoter region; portions of ponA , porB , gyrA , and parC ; and 23S rRNA sequences. NG-STAR grouped 768 isolates into 139 sequence types (STs) ( n = 660) consisting of 29 clonal complexes (CCs) having a maximum of a single-locus variation, and 76 NG-STAR STs ( n = 109) were identified as unrelated singletons. NG-STAR had a high Simpson's diversity index value of 96.5% (95% confidence interval [CI] = 0.959 to 0.969). The most common STs were NG-STAR ST-90 ( n = 100; 13.0%), ST-42 and ST-91 ( n = 45; 5.9%), ST-64 ( n = 44; 5.72%), and ST-139 ( n = 42; 5.5%). Decreased susceptibility to azithromycin was associated with NG-STAR ST-58, ST-61, ST-64, ST-79, ST-91, and ST-139 ( n = 156; 92.3%); decreased susceptibility to cephalosporins was associated with NG-STAR ST-90, ST-91, and ST-97 ( n = 162; 94.2%); and ciprofloxacin resistance was associated with NG-STAR ST-26, ST-90, ST-91, ST-97, ST-150, and ST-158 ( n = 196; 98.0%). All isolates of NG-STAR ST-42, ST-43, ST-63, ST-81, and ST-160 ( n = 106) were susceptible to all four antimicrobials. The standardization of nomenclature associated with antimicrobial resistance determinants through an internationally available database will facilitate the monitoring of the global dissemination of antimicrobial-resistant N. gonorrhoeae strains. © Crown copyright 2017.

  16. Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method

    Directory of Open Access Journals (Sweden)

    A. Vencl

    2013-06-01

    Full Text Available Abrasive wear is one of the most common types of wear, which makesabrasive wear resistance very important in many industries. Thehard facing is considered as useful and economical way to improve theperformance of components submitted to severe abrasive wear conditions, with wide range of applicable filler materials. The abrasive wear resistance of the three different hardfaced coatings (two iron‐based and one WC‐based, which were intended to be used for reparation of the impact plates of the ventilation mill, was investigated and compared. Abrasive wear tests were carried‐out by using the scratch tester under the dry conditions. Three normal loads of 10, 50 and 100 N and the constant sliding speed of 4 mm/s were used. Scratch test was chosen as a relatively easy and quick test method. Wear mechanism analysis showed significant influence of the hardfaced coatings structure, which, along with hardness, has determined coatings abrasive wear resistance.

  17. In vitro antimicrobial activity of linezolid tested against vancomycin-resistant enterococci isolated in Brazilian hospitals

    Directory of Open Access Journals (Sweden)

    Reis Adriana O.

    2001-01-01

    Full Text Available The emergence of vancomycin-resistant enterococci (VRE has been described recently in Brazil. This is in contrast to the USA and Europe, where the VRE appeared in the late 1980s. The progressive increase in VRE isolation poses important problems in the antimicrobial therapy of nosocomial infections. Treatment options and effective antimicrobial agents for VRE are often limited and the possibility of transfer of vancomycin genes to other Gram-positive microorganisms continues. In the search for antimicrobial agents for multiresistant Gram-positive cocci, compounds such as linezolid and quinupristin/dalfopristin have been evaluated. The present study was conducted to evaluate the in vitro activity of the oxazolidinone linezolid and 10 other antimicrobial agents, including quinupristin-dalfopristin, against multiresistant enterococci isolated in Brazilian hospitals. Thirty-three vancomycin resistant isolates (17 Enterococcus faecium and 16 E. faecalis, were analyzed. Strains were isolated from patients at São Paulo Hospital, Oswaldo Cruz Hospital, Hospital do Servidor Público Estadual, Santa Marcelina Hospital, Santa Casa de Misericórdia de São Paulo, and Hospital de Clínicas do Paraná. The samples were tested by a broth microdilution method following the National Committee for Clinical Laboratory Standards (NCCLS recommendations. All isolates were molecular typed using pulsed-field gel electrophoresis (PFGE. Linezolid was the most active compound against these multiresistant enterococci, showing 100% inhibition at the susceptible breakpoints. Quinupristin/dalfopristin and teicoplanin showed poor activity against both species. The molecular typing results suggest that there has been interhospital spread of vancomycin resistant E. faecium and E. faecalis among Brazilian hospitals. The results of this study indicate that linezolid is an appropriate therapeutic option for the treatment of vancomycin-resistant enterococci infections in Brazil.

  18. Design type testing for digital instrumentation and control systems

    International Nuclear Information System (INIS)

    Bastl, W.; Mohns, G.

    1997-01-01

    The design type qualification of digital safety instrumentation and control is outlined. Experience shows that the concepts discussed, derived from codes, guidelines and standards, achieve useful results. It has likewise become clear that the systematics of design type qualification of the hardware components is also applicable to the software components. Design type qualification of the software, a premiere, could be performed unexpectedly smoothly. The hardware design type qualification proved that the hardware as a substrate of functionality and reliability is an issue that demands full attention, as compared to conventional systems. Another insight is that design qualification of digital instrumentation and control systems must include plant-independent systems tests. Digital instrumentation and control systems simply work very differently from conventional control systems, so that this testing modality is inevitable. (Orig./CB) [de

  19. Electrical resistivity testing for as-built concrete performance assessment of chloride penetration resistance

    NARCIS (Netherlands)

    Polder, R.B.; Peelen, W.H.A.

    2014-01-01

    The electrical resistivity of concrete can provide information about its transport properties, which is relevant for durability performance. For example, resistivity is inversely proportional to chloride diffusion, at least within similar concrete compositions. A methodology is proposed for on-site

  20. State-wide surveillance of antibiotic resistance patterns and spa types of methicillin-resistant Staphylococcus aureus from blood cultures in North Rhine-Westphalia, 2011-2013.

    Science.gov (United States)

    Cuny, C; Layer, F; Werner, G; Harmsen, D; Daniels-Haardt, I; Jurke, A; Mellmann, A; Witte, W; Köck, R

    2015-08-01

    Methicillin-resistant Staphylococcus aureus (MRSA) is a major cause of bacteraemia. We aimed to obtain a complete picture of severe MRSA infections by characterizing all MRSA isolates from bloodstream infections in the largest German federal state (North Rhine-Westphalia, 18 million inhabitants) using S. aureus protein A (spa) sequence-typing and antimicrobial susceptibility testing. MRSA isolates (n = 1952) were collected prospectively (2011-2013) and spa-typed. Among 181 different spa types, t003 (n = 746 isolates; 38.2%) and t032 (n = 594; 30.4%) were predominant. Analysis of the geographical occurrence of spa clonal complexes (spa-CCs) and spa types revealed divergent distribution between federal state districts for spa-CCs 003 (p resistant to fluoroquinolones, 78% to erythromycin, 70% to clindamycin, 4% to gentamicin, 2% to rifampicin, 0.4% to daptomycin, 0.1% to linezolid and 0% to vancomycin, respectively. Vancomycin MICs of 2 mg/L involved 0.5% of the isolates. In conclusion, the detection of regional molecular clusters added valuable information for epidemiological case tracing and allowed conclusions to be reached on the importance of newly emerging MRSA reservoirs, such as livestock (spa-CC011), for MRSA bacteraemia in some parts of the federal state. Susceptibility testing revealed broad resistance to substances used for oral treatment, but demonstrated that those antibiotics that are mostly applied for treatment of MRSA bacteraemia and important combination partners were highly susceptible. Copyright © 2015 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  1. Campylobacter Species Isolated from Pigs in Grenada Exhibited Novel Clones: Genotypes and Antimicrobial Resistance Profiles of Sequence Types.

    Science.gov (United States)

    Amadi, Victor A; Matthew-Belmar, Vanessa; Subbarao, Charmarthy; Kashoma, Isaac; Rajashekara, Gireesh; Sharma, Ravindra; Hariharan, Harry; Stone, Diana

    2017-07-01

    Infections caused by Campylobacter species pose a severe threat to public health worldwide. However, in Grenada, the occurrence and characteristics of Campylobacter in food animals, including pigs, remain mostly unknown. In this study, we identified the sequence types (STs) of Campylobacter from young healthy pigs in Grenada and compared the results with previous studies in Grenada and other countries. Antimicrobial resistance patterns and diversity of the Campylobacter clones were evaluated. Ninety-nine Campylobacter isolates (97 Campylobacter coli and 2 Campylobacter jejuni) were analyzed by multilocus sequence typing. Eighteen previously reported STs and 13 novel STs were identified. Of the 18 previously reported STs, eight STs (ST-854, -887, -1068, -1096, -1445, -1446, 1556, and -1579) have been associated with human gastroenteritis in different geographical regions. Among these 18 previously reported STs, ST-1428, -1096, -1450, and -1058 predominated and accounted for 18.2%, 14.1%, 11.1%, and 8.1% of all isolates, respectively. Of the 13 novel STs, ST-7675 predominated and accounted for 20% (4 of 20 isolates), followed by ST-7678, -7682, and -7691, each accounting for 10% (2 of 20 isolates). Antimicrobial resistance testing using Epsilometer test revealed a low resistance rate (1-3%) of all C. coli/jejuni STs to all antimicrobials except for tetracycline (1-10.1%). Some of the C. coli STs (13 STs, 24/99 isolates, 24.2%) were resistant to multiple antimicrobials. This is the first report on antimicrobial resistance and multidrug resistance patterns associated with Campylobacter STs recovered from swine in Grenada. This study showed that pigs in Grenada are not major reservoirs for STs of C. coli and C. jejuni that are associated with human gastroenteritis worldwide.

  2. The spa typing of methicillin-resistant Staphylococcus aureus isolates by High Resolution Melting (HRM) analysis.

    Science.gov (United States)

    Fasihi, Yasser; Fooladi, Saba; Mohammadi, Mohammad Ali; Emaneini, Mohammad; Kalantar-Neyestanaki, Davood

    2017-09-06

    Molecular typing is an important tool for control and prevention of infection. A suitable molecular typing method for epidemiological investigation must be easy to perform, highly reproducible, inexpensive, rapid and easy to interpret. In this study, two molecular typing methods including the conventional PCR-sequencing method and high resolution melting (HRM) analysis were used for staphylococcal protein A (spa) typing of 30 Methicillin-resistant Staphylococcus aureus (MRSA) isolates recovered from clinical samples. Based on PCR-sequencing method results, 16 different spa types were identified among the 30 MRSA isolates. Among the 16 different spa types, 14 spa types separated by HRM method. Two spa types including t4718 and t2894 were not separated from each other. According to our results, spa typing based on HRM analysis method is very rapid, easy to perform and cost-effective, but this method must be standardized for different regions, spa types, and real-time machinery.

  3. Genetic relatedness of ciprofloxacin-resistant Shigella dysenteriae type 1 strains isolated in south Asia.

    Science.gov (United States)

    Talukder, Kaisar A; Khajanchi, Bijay K; Islam, M Aminul; Dutta, Dilip K; Islam, Zhahirul; Safa, Ashrafus; Khan, G Y; Alam, Khorshed; Hossain, M A; Malla, Sarala; Niyogi, S K; Rahman, Mustafizur; Watanabe, Haruo; Nair, G Balakrish; Sack, David A

    2004-10-01

    The aim of the present study was to determine the clonal relationships of ciprofloxacin-resistant Shigella dysenteriae type 1 strains isolated from south Asia, and S. dysenteriae 1 strains associated with epidemics in 1978, 1984 and 1994. The antimicrobial susceptibilities were examined by NCCLS methods. Molecular epidemiological characterization was performed by plasmid profiling, pulsed-field gel electrophoresis (PFGE) and mutation analysis of the quinolone resistance-determining region (QRDR) of gyrA by sequencing. Plasmid patterns of the current ciprofloxacin-resistant strains from India, Nepal and Bangladesh were very similar to those of the 1978, 1984 and 1994 epidemic isolates of S. dysenteriae 1, except for the presence of a new plasmid of approximately 2.6 MDa, which was found in one recent ciprofloxacin-resistant strain isolated in Bangladesh. PFGE analysis showed that the ciprofloxacin-resistant strains isolated in Bangladesh, India and Nepal belonged to a PFGE type (type A), which was possibly related to that of the 1984 and 1994 clone of S. dysenteriae 1, but different from 1978 epidemic strains. The current ciprofloxacin-resistant strains belong to five subtypes (A3-A7), all of which were found in India, but in Bangladesh and Nepal, only A3 existed. Mutation analysis of the QRDR of gyrA revealed that amino acid substitutions at positions 83 and 87 of ciprofloxacin-resistant strains isolated in Bangladesh were similar to those of the strains isolated in Nepal, but different (at position 87) from ciprofloxacin-resistant strains isolated in India. PFGE and mutation analysis of gyrA showed differences between the current ciprofloxacin-resistant S. dysenteriae 1 strains isolated in south Asia and those associated with epidemics in 1978, 1984 and 1994.

  4. Dietary Patterns, Insulin Resistance, and Incidence of Type 2 Diabetes in the Whitehall II Study

    OpenAIRE

    McNaughton, Sarah A.; Mishra, Gita D.; Brunner, Eric J.

    2008-01-01

    OBJECTIVE?The aim of this study was to identify a dietary pattern associated with insulin resistance and investigate whether this pattern was prospectively associated with type 2 diabetes. RESEARCH DESIGN AND METHODS?Analysis was based on 7,339 participants of the Whitehall II study. Dietary intake was measured using a 127-item food frequency questionnaire. We used the reduced rank regression method to determine dietary patterns using the homeostasis model assessment of insulin resistance as ...

  5. 11beta-hydroxysteroid dehydrogenase type 1 regulates glucocorticoid-induced insulin resistance in skeletal muscle.

    LENUS (Irish Health Repository)

    Morgan, Stuart A

    2009-11-01

    Glucocorticoid excess is characterized by increased adiposity, skeletal myopathy, and insulin resistance, but the precise molecular mechanisms are unknown. Within skeletal muscle, 11beta-hydroxysteroid dehydrogenase type 1 (11beta-HSD1) converts cortisone (11-dehydrocorticosterone in rodents) to active cortisol (corticosterone in rodents). We aimed to determine the mechanisms underpinning glucocorticoid-induced insulin resistance in skeletal muscle and indentify how 11beta-HSD1 inhibitors improve insulin sensitivity.

  6. A cost-benefit model comparing the California Milk Cell Test and Milk Electrical Resistance Test.

    Science.gov (United States)

    Petzer, Inge-Marie; Karzis, Joanne; Meyer, Isabel A; van der Schans, Theodorus J

    2013-04-24

    The indirect effects of mastitis treatment are often overlooked in cost-benefit analyses, but it may be beneficial for the dairy industry to consider them. The cost of mastitis treatment may increase when the duration of intra-mammary infections are prolonged due to misdiagnosis of host-adapted mastitis. Laboratory diagnosis of mastitis can be costly and time consuming, therefore cow-side tests such as the California Milk Cell Test (CMCT) and Milk Electrical Resistance (MER) need to be utilised to their full potential. The aim of this study was to determine the relative benefit of using these two tests separately and in parallel. This was done using a partial-budget analysis and a cost-benefit model to estimate the benefits and costs of each respective test and the parallel combination thereof. Quarter milk samples (n= 1860) were taken from eight different dairy herds in South Africa. Milk samples were evaluated by means of the CMCT, hand-held MER meter and cyto-microbiological laboratory analysis. After determining the most appropriate cut-off points for the two cow-side tests, the sensitivity and specificity of the CMCT (Se= 1.00, Sp= 0.66), MER (Se= 0.92, Sp= 0.62) and the tests done in parallel (Se= 1.00, Sp= 0.87) were calculated. The input data that were used for partial-budget analysis and in the cost-benefit model were based on South African figures at the time of the study, and on literature. The total estimated financial benefit of correct diagnosis of host-adapted mastitis per cow for the CMCT, MER and the tests done in parallel was R898.73, R518.70 and R1064.67 respectively. This involved taking the expected benefit of a correct test result per cow, the expected cost of an error per cow and the cost of the test into account. The CMCT was shown to be 11%more beneficial than the MER test, whilst using the tests in parallel was shown to be the most beneficial method for evaluating the mastitis-control programme. Therefore, it is recommended that the

  7. A cost-benefit model comparing the California Milk Cell Test and Milk Electrical Resistance Test

    Directory of Open Access Journals (Sweden)

    Inge-Marie Petzer

    2013-04-01

    Full Text Available The indirect effects of mastitis treatment are often overlooked in cost-benefit analyses, but it may be beneficial for the dairy industry to consider them. The cost of mastitis treatment may increase when the duration of intra-mammary infections are prolonged due to misdiagnosis of host-adapted mastitis. Laboratory diagnosis of mastitis can be costly and time consuming, therefore cow-side tests such as the California Milk Cell Test (CMCT and Milk Electrical Resistance (MER need to be utilised to their full potential. The aim of this study was to determine the relative benefit of using these two tests separately and in parallel. This was done using a partial-budget analysis and a cost-benefit model to estimate the benefits and costs of each respective test and the parallel combination thereof. Quarter milk samples (n= 1860 were taken from eight different dairy herds in South Africa. Milk samples were evaluated by means of the CMCT, hand-held MER meter and cyto-microbiological laboratory analysis. After determining the most appropriate cut-off points for the two cow-side tests, the sensitivity and specificity of the CMCT (Se= 1.00, Sp= 0.66, MER (Se= 0.92, Sp= 0.62 and the tests done in parallel (Se= 1.00, Sp= 0.87 were calculated. The input data that were used for partial-budget analysis and in the cost-benefit model were based on South African figures at the time of the study, and on literature. The total estimated financial benefit of correct diagnosis of host-adapted mastitis per cow for the CMCT, MER and the tests done in parallel was R898.73, R518.70 and R1064.67 respectively. This involved taking the expected benefit of a correct test result per cow, the expected cost of an error per cow and the cost of the test into account. The CMCT was shown to be 11%more beneficial than the MER test, whilst using the tests in parallel was shown to be the most beneficial method for evaluating the mastitis-control programme. Therefore

  8. Electroforming-free resistive switching memory effect in transparent p-type tin monoxide

    KAUST Repository

    Hota, M. K.

    2014-04-14

    We report reproducible low bias bipolar resistive switching behavior in p-type SnO thin film devices without extra electroforming steps. The experimental results show a stable resistance ratio of more than 100 times, switching cycling performance up to 180 cycles, and data retention of more than 103 s. The conduction mechanism varied depending on the applied voltage range and resistance state of the device. The memristive switching is shown to originate from a redox phenomenon at the Al/SnO interface, and subsequent formation/rupture of conducting filaments in the bulk of the SnO layer, likely involving oxygen vacancies and Sn interstitials.

  9. Characterization of a heavy metal translocating P-type ATPase gene from an environmental heavy metal resistance Enterobacter sp. isolate.

    Science.gov (United States)

    Chien, Chih-Ching; Huang, Chia-Hsuan; Lin, Yi-Wei

    2013-03-01

    Heavy metals are common contaminants found in polluted areas. We have identified a heavy metal translocating P-type ATPase gene (hmtp) via fosmid library and in vitro transposon mutagenesis from an Enterobacter sp. isolate. This gene is believed to participate in the bacterium's heavy metal resistance traits. The complete gene was identified, cloned, and expressed in a suitable Escherichia coli host cell. E. coli W3110, RW3110 (zntA::Km), GG48 (ΔzitB::Cm zntA::Km), and GG51 (ΔzitB::Cm) were used to study the possible effects of this gene for heavy metal (cadmium and zinc in particular) resistance. Among the E. coli strains tested, RW3110 and GG48 showed more sensitivity to cadmium and zinc compared to the wild-type E. coli W3110 and strain GG51. Therefore, strains RW3110 and GG48 were chosen for the reference hosts for further evaluation of the gene's effect. The results showed that expression of this heavy metal translocating P-type ATPase gene could increase the ability for zinc and cadmium resistance in the tested microorganisms.

  10. Preparation and Testing of Corrosion and Spallation-Resistant Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, John

    2015-11-01

    This Energy & Environmental Research Center (EERC) project is designed to determine if plating APMT®, a specific highly oxidation-resistant oxide dispersion-strengthened FeCrAl alloy made by Kanthal, onto nickel-based superalloy turbine parts is a viable method for substantially improving the lifetimes and maximum use temperatures of the parts. The method for joining the APMT plate to the superalloys is called evaporative metal bonding and involves placing a thin foil of zinc between the plate and the superalloy, clamping them together, and heating in an atmosphere-controlled furnace. Upon heating, the zinc melts and dissolves the oxide skins of the alloys at the bond line, allowing the two alloys to diffuse into each other. The zinc then diffuses through the alloys and evaporates from their surfaces. During this annual reporting period, the finite element model was completed and used to design clamping jigs to hold the APMT plate to the larger blocks of superalloys during the bonding process. The clamping system was machined from titanium–zirconium–molybdenum and used to bond the APMT plate to the superalloy blocks. The bond between the APMT plate was weak for one of each of the superalloy blocks. We believe that this occurred because enough oxidation had occurred on the surface of the parts as a result of a 1-month time period between sandblasting to prepare the parts and the actual bonding process. The other blocks were, therefore, bonded within 1 day of preparing the parts for bonding, and their joints appear strong. Scanning electron microscopy analyses of representative joints showed that no zinc remained in the alloys after bonding. Also, phases rich in hafnium and tantalum had precipitated near the bond line in the APMT. Iron from the APMT had diffused into the superalloys during bonding, more extensively in the CM247LC than in the Rene 80. Nickel from the superalloys had diffused into the APMT, again more extensively in the joint with the CM247LC than

  11. Surface resistivity test evaluation as an indicator of the chloride permeability of concrete.

    Science.gov (United States)

    2012-12-01

    Many agencies have adopted the standard tests for electrical : indication of concretes ability to resist chloride ion penetration : (AASHTO T 277 and ASTM C1202), commonly known as the rapid : chloride permeability test (RCPT), in their specificat...

  12. 30 CFR 27.41 - Test to determine resistance to moisture.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test to determine resistance to moisture. 27.41... determine resistance to moisture. Components, subassemblies, or assemblies, the normal functioning of which might be affected by moisture, shall be tested in atmospheres of high relative humidity (80 percent or...

  13. Cyclic fatigue resistance tests of Nickel-Titanium rotary files using simulated canal and weight loading conditions

    Directory of Open Access Journals (Sweden)

    Ok-In Cho

    2013-02-01

    Full Text Available Objectives This study compared the cyclic fatigue resistance of nickel-titanium (NiTi files obtained in a conventional test using a simulated canal with a newly developed method that allows the application of constant fatigue load conditions. Materials and Methods ProFile and K3 files of #25/.06, #30/.06, and #40/.04 were selected. Two types of testing devices were built to test their fatigue performance. The first (conventional device prescribed curvature inside a simulated canal (C-test, the second new device exerted a constant load (L-test whilst allowing any resulting curvature. Ten new instruments of each size and brand were tested with each device. The files were rotated until fracture and the number of cycles to failure (NCF was determined. The NCF were subjected to one-way ANOVA and Duncan's post-hoc test for each method. Spearman's rank correlation coefficient was computed to examine any association between methods. Results Spearman's rank correlation coefficient (ρ = -0.905 showed a significant negative correlation between methods. Groups with significant difference after the L-test divided into 4 clusters, whilst the C-test gave just 2 clusters. From the L-test, considering the negative correlation of NCF, K3 gave a significantly lower fatigue resistance than ProFile as in the C-test. K3 #30/.06 showed a lower fatigue resistance than K3 #25/.06, which was not found by the C-test. Variation in fatigue test methodology resulted in different cyclic fatigue resistance rankings for various NiTi files. Conclusions The new methodology standardized the load during fatigue testing, allowing determination fatigue behavior under constant load conditions.

  14. The role of hepatic lipids in hepatic insulin resistance and type 2 diabetes

    DEFF Research Database (Denmark)

    Perry, Rachel J; Samuel, Varman T.; Petersen, Kitt Mia Falck

    2014-01-01

    Non-alcoholic fatty liver disease and its downstream sequelae, hepatic insulin resistance and type 2 diabetes, are rapidly growing epidemics, which lead to increased morbidity and mortality rates, and soaring health-care costs. Developing interventions requires a comprehensive understanding...... of the mechanisms by which excess hepatic lipid develops and causes hepatic insulin resistance and type 2 diabetes. Proposed mechanisms implicate various lipid species, inflammatory signalling and other cellular modifications. Studies in mice and humans have elucidated a key role for hepatic diacylglycerol...... activation of protein kinase Cε in triggering hepatic insulin resistance. Therapeutic approaches based on this mechanism could alleviate the related epidemics of non-alcoholic fatty liver disease and type 2 diabetes....

  15. 33 CFR 159.126 - Coliform test: Type II devices.

    Science.gov (United States)

    2010-07-01

    ... follows: During each of the 10 test days, one sample must be taken at the beginning, middle and end of an 8-consecutive hour period with one additional sample taken immediately following the peak capacity...: Type II devices. (a) The arithmetic mean of the fecal coliform bacteria in 38 of 40 samples of effluent...

  16. 33 CFR 159.123 - Coliform test: Type I devices.

    Science.gov (United States)

    2010-07-01

    ... as follows: During each of the 10-test days, one sample must be taken at the beginning, middle, and end of an 8-consecutive hour period with one additional sample taken immediately following the peak...: Type I devices. (a) The arithmetic mean of the fecal coliform bacteria in 38 of 40 samples of effluent...

  17. Hydraulic testing of Type Q septifoils including modifications

    International Nuclear Information System (INIS)

    Steimke, J.L.; Fowley, M.D.; Guerrero, H.N.

    1992-09-01

    On May 25, 1992 a leak of moderator was detected as K Reactor was approaching initial criticality. The partial length control rods were being withdrawn when the leak detectors in the Process Room alarmed. The apparent location of the moderator leak was the top of the guide tubes which are positioned over the new Type Q septifoils. The reactor was shut down immediately. In response, a testing program was begun at the Heat Transfer Laboratory (HTL). The goals of the program were to determine the cause of the septifoil leak and to test methods for preventing future leaks. These tests are described in this report

  18. Association of serum sparc with insulin resistance in type-2 diabetes mellitus

    International Nuclear Information System (INIS)

    Nadeem, K.; Ahmed, U.; Arif, H.

    2017-01-01

    Objective: To determine the association of serum SPARC with insulin resistance in type-2 diabetes. Study Design: Descriptive study. Place and Duration of Study: Physiology department and CREAM lab, Army medical college, Rawalpindi, in collaboration with Military Hospital Rawalpindi, from Feb 2016 to Oct 2016. Material and Methods: Sixty individuals were recruited in this descriptive study. Thirty diagnosed cases of type- 2 DM were included, while thirty age and gender matched healthy individuals were included as controls through non-probability purposive sampling. Controls were labelled as group A, while cases were labelled as group B. Patients with type-1 DM, type-2 DM on insulin therapy, hyperglycemic states other than DM and inflammatory disorders were excluded from the study. Data were collected after informed and written consent. Blood samples were withdrawn under strict aseptic measures and serum was stored at -20 degree C. Serum insulin levels and serum SPARC levels were analyzed by enzyme linked immunosorbent assay (ELISA). Insulin resistance was determined using homeostasis model assessment of insulin resistance (HOMA-IR), and its value >1.5 was considered significant. Results: Fasting insulin levels were significantly higher in group B as compared with group A, supporting the diagnosis of type-2 DM. HOMA-IR values were greater than 1.5 in group B, thus establishing significant insulin resistance. Serum SPARC levels were significantly higher in group B than group A (17.7 ± 1.14 vs 8.7 ± 1.08 ng/ml) with p-value<0.001. Serum SPARC levels showed positive correlation with fasting insulin levels and HOMA-IR values. Conclusion: Our study showed a positive correlation between serum SPARC levels and insulin resistance, which indicates that SPARC plays an important role in the development of insulin resistance in type-2 diabetes mellitus. (author)

  19. A durability test rig and methodology for erosion-resistant blade coatings in turbomachinery

    Science.gov (United States)

    Leithead, Sean Gregory

    A durability test rig for erosion-resistant gas turbine engine compressor blade coatings was designed, completed and commissioned. Bare and coated 17-4PH steel V103-profile blades were rotated at up to 11500 rpm and impacted with Garnet sand for 5 hours at an average concentration of 2.51 gm3of air , at a blade leading edge Mach number of 0.50. The rig was determined to be an acceptable first stage axial compressor representation. Two types of 16 microm-thick coatings were tested: Titanium Nitride (TiN) and Chromium-Aluminum-Titanium Nitride (CrAlTiN), both applied using an Arc Physical Vapour Deposition technique at the National Research Council in Ottawa, Canada. A Leithead-Allan-Zhao (LAZ) score was created to compare the durability performance of uncoated and coated blades based on mass-loss and blade dimension changes. The bare blades' LAZ score was set as a benchmark of 1.00. The TiN-coated and CrAlTiN-coated blades obtained LAZ scores of 0.69 and 0.41, respectively. A lower score meant a more erosion-resistant coating. Major modes of blade wear included: trailing edge, leading edge and the rear suction surface. Trailing edge thickness was reduced, the leading edge became blunt, and the rear suction surface was scrubbed by overtip and recirculation zone vortices. It was found that the erosion effects of vortex flow were significant. Erosion damage due to reflected particles was not present due to the low blade solidity of 0.7. The rig is best suited for studying the performance of erosion-resistant coatings after they are proven effective in ASTM standardized testing. Keywords: erosion, compressor, coatings, turbomachinery, erosion rate, blade, experimental, gas turbine engine

  20. Environmental determinants of type 1 diabetes: a role for overweight and insulin resistance.

    Science.gov (United States)

    Islam, Sadia T; Srinivasan, Shubha; Craig, Maria E

    2014-11-01

    Rates of type 1 diabetes are rising globally, with a decreasing proportion of high-risk genotypes and twin concordance rates below 50%. Therefore, environmental factors such as viruses, nutrition and overweight have been examined as putative aetiological agents. The accelerator hypothesis proposes that overweight and insulin resistance are central to both type 1 and type 2 diabetes and may explain, in part, the rise in type 1 diabetes incidence. The temporal rise in body mass index at type 1 diabetes onset and the observation that pre-diabetic children are heavier and more insulin resistant than their peers suggests convergence of type 1 and type 2 diabetes phenotypes. The influence of insulin resistance may begin in utero, although the aetiological role of birthweight in type 1 diabetes remains unclear. Further research to elucidate the role of these modifiable risk factors in today's obesogenic environment may provide future potential for diabetes prevention. © 2014 The Authors. Journal of Paediatrics and Child Health © 2014 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  1. A combination of electrical resistivity and cone penetration test ...

    African Journals Online (AJOL)

    The conductive unconsolidated clayey soil / peat with the resistivity values 0.9 – 10 Ωm cum CPT values 2 to 4 kg/cm2 experienced along noticeable depressed parts could have contributed to the cracking and differential settlement of the residential buildings in the study area. However, boring via percussion drilling should ...

  2. Testing of disease-resistance of pokeweed antiviral protein gene ...

    African Journals Online (AJOL)

    Transformation of pokeweed antiviral protein gene (PAP) into plants was shown to improve plant resistance to several viruses or fungi pathogens with no much negative effect on plant growth. The non-virulent defective PAP inhibits only the virus but does not interfere with the host. A non-virulent defective PAP gene ...

  3. Testing of Some Canine Blood Types in Transfusion Compatibility Assessment

    Directory of Open Access Journals (Sweden)

    L Ognean

    2014-01-01

    Full Text Available Blood types were determined using SHIGETA (n=136 and DEA1.1 (n=25 kits, in two groups of dogs, consisting of patients that underwent blood transfusions and healthy donors. The tests were conducted in accordance with the procedures established by the manufacturers, using specific monoclonal antibodies kits, heparinized blood for the tube agglutination (TUBE and slide (SLIDE methods, and EDTA treated blood for the CARD and chromatographic (CHROM methods. The clear expression of tube agglutination reaction in the SHIGETA kit provided a good detection of antigens. Positive reactions with anti-DEA1.1 were clear and evident with the CHROM test. SHIGETA tests revealed a predominance 1.1B (47.05% of blood type, common in Rotweilers (81.81% and Romanian Shepherds (73.68% and group 1(-B (24.26%, frequently found in German Shepherds (54.16%, these also representing an important source of compatible blood. DEA1.1 type test, revealed a high frequency of positive dogs (75%, associated with lower number of potential donors. Extrapolation of SHIGETA groups into the DEA system, confirmed the 1(-B positive dogs as DEA 1.1 negative, and their prevalence in German Shepherds also confirmed their known tendency to be “ideal donors”. The CHROME test showed a good efficiency in auto agglutination control and detecting DEA1.1 positive dogs, including patients with severe forms of anemia.

  4. Corrosion testing of type 304L stainless steel in tuff groundwater environments

    International Nuclear Information System (INIS)

    Westerman, R.E.; Pitman, S.G.; Haberman, J.H.

    1987-11-01

    The stress-corrosion cracking (SCC) resistance of Type 304L stainless steel (SS) to elevated temperatures in tuff rock and tuff groundwater environments was determined under irradiated and nonirradiated conditions using U-bend specimens and slow-strain-rate tests. The steel was tested both in the solution-annealed condition and after sensitization heat treatments. The material was found to be susceptible to SCC in both the solution-annealed and solution-annealed-and-sensitized conditions when exposed to an irradiated crushed tuff rock environment containing air and water vapor at 90 0 C. A similar exposure at 50 0 C did not result in failure after a 25-month test duration. Specimens of sensitized 304 SS conditioned with a variety of sensitization heat treatments resisted failure during a test of 1-year duration in which a nonirradiated environment of tuff rock and groundwater held at 200 0 C was allowed to boil to dryness on a cyclical basis. All specimens of sensitized 304 SS exposed to this environment failed. Slow-strain-rate studies were performed on 304L, 304, and 316L SS specimens. The 304L SS was tested in J-13 well water at 150 0 C, and the 316L SS at 95 0 C. Neither material showed evidence of SCC in these tests. Sensitized 304 SS did exhibit SCC in J-13 well water in tests conducted at 150 0 C. 12 refs., 27 figs., 13 tabs

  5. Direct measurement of graphene contact resistivity to pre-deposited metal in buried contact test structure

    KAUST Repository

    Qaisi, Ramy M.; Smith, Casey; Ghoneim, Mohamed T.; Yu, Qingkai; Hussain, Muhammad Mustafa

    2013-01-01

    We demonstrate a buried contact based novel test structure for direct contact resistivity measurement of graphene-metal interfaces. We also observe excellent contact resistivity 1 μO-cm2 without any additional surface modification suggesting that the intrinsic Au-graphene contact is sufficient for achieving devices with low contact resistance. The chemical mechanical polishing less test structure and data described herein highlights an ideal methodology for systematic screening and engineering of graphene-metal contact resistivity to enable low power high speed carbon electronics. © 2013 IEEE.

  6. Direct measurement of graphene contact resistivity to pre-deposited metal in buried contact test structure

    KAUST Repository

    Qaisi, Ramy M.

    2013-08-01

    We demonstrate a buried contact based novel test structure for direct contact resistivity measurement of graphene-metal interfaces. We also observe excellent contact resistivity 1 μO-cm2 without any additional surface modification suggesting that the intrinsic Au-graphene contact is sufficient for achieving devices with low contact resistance. The chemical mechanical polishing less test structure and data described herein highlights an ideal methodology for systematic screening and engineering of graphene-metal contact resistivity to enable low power high speed carbon electronics. © 2013 IEEE.

  7. Type testing of devices with inserted radioactive sources

    International Nuclear Information System (INIS)

    Rolle, A.; Droste, B.; Dombrowski, H.

    2006-01-01

    In Germany devices with inserted radioactive sources can get a type approval if they comply with specific requirements. Whoever operates a device whose type has been approved in accordance with the German Radiation Protection Ordinance does not need an individual authorization. Such type approvals for free use are granted by the Federal Office for Radiation Protection (B.f.S.) on the basis of type testing performed by the Physikalisch-Technische Bundesanstalt (P.T.B.), the national metrology institute, and the Bundesanstalt fur Materialforschung und -prufung (B.A.M.), the Federal Institute for Materials Research and Testing. Main aspects of the assessment are the activity of the radioactive sources, the dose equivalent rate near the devices, the tamper-proofness and leak-tightness of the sources and the safety of the construction of the devices. With the new Radiation Protection Ordinance in 2001, more stringent requirements for a type approval were established. Experiences with the new regulations and the relevant assessment criteria applied by P.T.B. and B.A.M. will be presented. (authors)

  8. European recommendations for the clinical use of HIV drug resistance testing: 2011 update

    DEFF Research Database (Denmark)

    Vandamme, Anne-Mieke; Camacho, Ricardo J; Ceccherini-Silberstein, Francesca

    2011-01-01

    , and other drug targets (integrase and envelope) if such drugs were part of the failing regimen; (iii) consider testing for CCR5 tropism at virologic failure or when a change of therapy has to be made in absence of detectable viral load, and in the latter case test DNA or last detectable plasma RNA; (iv...... the following recommendations concerning the indications for resistance testing: for HIV-1 (i) test earliest sample for protease and reverse transcriptase drug resistance in drug-naive patients with acute or chronic infection; (ii) test protease and reverse transcriptase drug resistance at virologic failure...... is needed after treatment failure. The Panel recommends genotyping in most situations, using updated and clinically evaluated interpretation systems. It is mandatory that laboratories performing HIV resistance tests take part regularly in external quality assurance programs, and that they consider storing...

  9. spa typing and antimicrobial resistance of Staphylococcus aureus from healthy humans, pigs and dogs in Tanzania

    DEFF Research Database (Denmark)

    Katakweba, Abdul S.; Muhairwa, Amandus P.; Espinosa-Gongora, Carmen

    2016-01-01

    . aureus carrier frequencies in dogs and humans were within the expected range and low in pigs. The S. aureus spa types circulating in the community were generally not shared by different hosts and majority of types belonged to known clones. Besides ampicillin resistance, moderate levels of antimicrobial......Introduction: Staphylococcus aureus is an opportunistic pathogen causing infections in humans and animals. Here we report for the first time the prevalence of nasal carriage, spa typing and antimicrobial resistance of S. aureus in a Tanzanian livestock community. Methodology: Nasal swabs were taken...... from 100 humans, 100 pigs and 100 dogs in Morogoro Municipal. Each swab was enriched in Mueller Hinton broth with 6.5% NaCl and subcultured on chromogenic agar for S. aureus detection. Presumptive S. aureus colonies were confirmed to the species level by nuc PCR and analysed by spa typing...

  10. Systematic review, meta-analysis and economic modelling of molecular diagnostic tests for antibiotic resistance in tuberculosis.

    Science.gov (United States)

    Drobniewski, Francis; Cooke, Mary; Jordan, Jake; Casali, Nicola; Mugwagwa, Tendai; Broda, Agnieszka; Townsend, Catherine; Sivaramakrishnan, Anand; Green, Nathan; Jit, Mark; Lipman, Marc; Lord, Joanne; White, Peter J; Abubakar, Ibrahim

    2015-05-01

    introducing rapid molecular testing (in addition to culture and drug sensitivity testing). Probabilistic sensitivity analysis was performed to evaluate the impact on cost-effectiveness of diagnostic and treatment time delays, diagnosis and treatment costs, and associated QALYs. A total of 8922 titles and abstracts were identified, with 557 papers being potentially eligible. Of these, 56 studies contained sufficient test information for analysis. All three commercial tests performed well when detecting drug resistance in clinical samples, although with evidence of heterogeneity between studies. Pooled sensitivity for GenoType® MTBDRplus (Hain Lifescience, Nehren, Germany) (isoniazid and rifampicin resistance), INNO-LiPA Rif.TB® (Fujirebio Europe, Ghent, Belgium) (rifampicin resistance) and Xpert® MTB/RIF (Cepheid Inc., Sunnyvale, CA, USA) (rifampicin resistance) was 83.4%, 94.6%, 95.4% and 96.8%, respectively; equivalent pooled specificity was 99.6%, 98.2%, 99.7% and 98.4%, respectively. Results of the transmission model suggest that all of the rapid assays considered here, if added to the current diagnostic pathway, would be cost-saving and achieve a reduction in expected QALY loss compared with current practice. GenoType MTBDRplus appeared to be the most cost-effective of the rapid tests in the South Asian population, although results were similar for GeneXpert. In all other scenarios GeneXpert appeared to be the most cost-effective strategy. Rapid molecular tests for rifampicin and isoniazid resistance were sensitive and specific. They may also be cost-effective when added to culture drug susceptibility testing in the UK. There is global interest in point-of-care testing and further work is needed to review the performance of emerging tests and the wider health-economic impact of decentralised testing in clinics and primary care, as well as non-health-care settings, such as shelters and prisons. This study is registered as PROSPERO CRD42011001537. The National Institute

  11. Systematic review, meta-analysis and economic modelling of molecular diagnostic tests for antibiotic resistance in tuberculosis.

    Science.gov (United States)

    Drobniewski, Francis; Cooke, Mary; Jordan, Jake; Casali, Nicola; Mugwagwa, Tendai; Broda, Agnieszka; Townsend, Catherine; Sivaramakrishnan, Anand; Green, Nathan; Jit, Mark; Lipman, Marc; Lord, Joanne; White, Peter J; Abubakar, Ibrahim

    2015-01-01

    economic model was used to evaluate the cost-effectiveness of introducing rapid molecular testing (in addition to culture and drug sensitivity testing). Probabilistic sensitivity analysis was performed to evaluate the impact on cost-effectiveness of diagnostic and treatment time delays, diagnosis and treatment costs, and associated QALYs. RESULTS A total of 8922 titles and abstracts were identified, with 557 papers being potentially eligible. Of these, 56 studies contained sufficient test information for analysis. All three commercial tests performed well when detecting drug resistance in clinical samples, although with evidence of heterogeneity between studies. Pooled sensitivity for GenoType® MTBDRplus (Hain Lifescience, Nehren, Germany) (isoniazid and rifampicin resistance), INNO-LiPA Rif.TB® (Fujirebio Europe, Ghent, Belgium) (rifampicin resistance) and Xpert® MTB/RIF (Cepheid Inc., Sunnyvale, CA, USA) (rifampicin resistance) was 83.4%, 94.6%, 95.4% and 96.8%, respectively; equivalent pooled specificity was 99.6%, 98.2%, 99.7% and 98.4%, respectively. Results of the transmission model suggest that all of the rapid assays considered here, if added to the current diagnostic pathway, would be cost-saving and achieve a reduction in expected QALY loss compared with current practice. GenoType MTBDRplus appeared to be the most cost-effective of the rapid tests in the South Asian population, although results were similar for GeneXpert. In all other scenarios GeneXpert appeared to be the most cost-effective strategy. CONCLUSIONS Rapid molecular tests for rifampicin and isoniazid resistance were sensitive and specific. They may also be cost-effective when added to culture drug susceptibility testing in the UK. There is global interest in point-of-care testing and further work is needed to review the performance of emerging tests and the wider health-economic impact of decentralised testing in clinics and primary care, as well as non-health-care settings, such as shelters and

  12. Clinical implications of molecular drug resistance testing for Mycobacterium tuberculosis: a TBNET/RESIST-TB consensus statement

    NARCIS (Netherlands)

    Domínguez, J.; Boettger, E. C.; Cirillo, D.; Cobelens, F.; Eisenach, K. D.; Gagneux, S.; Hillemann, D.; Horsburgh, R.; Molina-Moya, B.; Niemann, S.; Tortoli, E.; Whitelaw, A.; Lange, C.

    2016-01-01

    The emergence of drug-resistant strains of Mycobacterium tuberculosis is a challenge to global tuberculosis (TB) control. Although culture-based methods have been regarded as the gold standard for drug susceptibility testing (DST), molecular methods provide rapid information on mutations in the M.

  13. Variation of minority charge carrier lifetime in high-resistance p-type silicon under irradiation

    International Nuclear Information System (INIS)

    Basheleishvili, Z.V.; Garnyk, V.S.; Gorin, S.N.; Pagava, T.A.

    1984-01-01

    The minority carrier lifetime (tau) variation was studied in the process of p-type silicon bombardment with fast 8 MeV electrons. The irradiation and all measurements were carried out at room temperature. The tau quantity was measured by the photoconductivity attenuation method at a low injection level 20% measurement error; the resistivity was measured by the four-probe method (10% error). The resistivity and minority charge carrier lifetime tau are shown to increase with the exposure dose. It is supposed that as radiation dose increases, the rearrangement of the centres responsible for reducing the lifetime occurs and results in a tau increase in the material being irradiated, however the tau value observed in the original samples is not attained. The restoration of the minority carrier lifetime in p-type high-resistance silicon with a growing exposure dose might proceed due to reduction in the free carrier concentration

  14. Increased CD19+CD24+CD27+ B regulatory cells are associated with insulin resistance in patients with type I Hashimoto's thyroiditis.

    Science.gov (United States)

    Yang, Min; Du, Changji; Wang, Yinping; Liu, Jun

    2017-06-01

    Hashimoto's thyroiditis (HT) is characterized by dysregulated immune responses and is commonly associated with insulin resistance. However, the mechanism of insulin resistance in HT remains to be fully elucidated. The aim of the present study was to investigate the correlation between the percentage of B regulatory lymphocytes (Bregs) and insulin resistance in patients with HT but with normal thyroid function (type I). A total of 59 patients with type I HT and 38 healthy volunteers were enrolled in the study. An oral glucose tolerance test was performed to measure insulin secretion and assess β‑cell functions. Flow cytometry was performed to examine the percentages of lymphocyte populations. The patients with HT exhibited normal fasting and postprandial glucose and fasting insulin secretion, but increased secretion of early‑phase and total insulin. The patients with HT also had insufficient β‑cell compensation for insulin resistance, indicated by a reduced disposition index, in the fasting state. An elevation in the percentage of CD19+CD24+CD27+ Bregs was also observed, which correlated positively with insulin secretion and insulin resistance in the fasting state. The patients with type I HT had postprandial insulin resistance and insufficient β‑cell compensation for fasting insulin resistance. Therefore, the increase in CD19+CD24+CD27+ Bregs was closely associated with fasting insulin secretion. These results provide novel insight into the mechanism of insulin resistance in HT.

  15. Simple test of synergy between ampicillin and vancomycin for resistant strains of Enterococcus faecium.

    OpenAIRE

    Green, M; Barbadora, K; Wadowsky, R M

    1994-01-01

    The combination of ampicillin and vancomycin kills some but not all strains of ampicillin- and vancomycin-resistant Enterococcus faecium. We compared a simple test for synergy utilizing a commercially available microdilution susceptibility system with time-kill studies and determined acceptable breakpoints for this test for 20 strains of ampicillin- and vancomycin-resistant E. faecium. The combination of ampicillin and vancomycin was tested for synergy by time-kill, broth macrodilution, and b...

  16. Correlation of serum vitamin E content with insulin resistance and oxidative stress response in patients with type 2 diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Jun Li

    2017-08-01

    Full Text Available Objective: To study the correlation of serum vitamin E content with insulin resistance and oxidative stress response in patients with type 2 diabetes mellitus. Methods: Patients who were diagnosed with type 2 diabetes mellitus in Xining Second People’s Hospital between February 2016 and February 2017 were selected as T2DM group, healthy volunteers who received physical examination during the same period were selected as control group, oral glucose tolerance test was conducted to detect insulin resistance indexes, and fasting venous blood was collected to detect oxidative stress indicators. Results: Serum VitE, 2 h-Ins, 2 h-CP, Trx, Txnip, SOD and GSH-Px levels of T2DM group were significantly lower than those of control group while F-Ins, F-CP, MDA, AOPP, 8-OHdG, AGEs and LOX-1 levels were significantly higher than those of control group; serum VitE level in T2DM patients was positively correlated with serum 2 h-Ins, 2 h-CP, Trx, Txnip, SOD and GSH-Px levels, and negatively correlated with serum F-Ins, F-CP, MDA, AOPP, 8-OHdG, AGEs and LOX-1 levels. Conclusion: The decrease of serum vitamin E in patients with type 2 diabetes mellitus can lead to the aggravation of insulin resistance and the activation of oxidative stress response.

  17. Type A behavior and the thallium stress test

    International Nuclear Information System (INIS)

    Kahn, J.P.; Kornfeld, D.S.; Blood, D.K.; Lynn, R.B.; Heller, S.S.; Frank, K.A.

    1982-01-01

    Several recent studies have examined the association between Type A personality and coronary artery disease (CAD) by coronary angiography. Most of these studies have reported a significant association. The present study is an attempt at further confirmation, using a new non-invasive technique for measuring CAD. Subjects were 53 patients undergoing routine exercise stress tests with concomitant thallium-201 myocardial perfusion studies. Five aspects of Type A behavior were assessed by the use of the Rosenman-Friedman Semistructured Interview, and each was rated on a three-point scale. Severity of CAD was independently estimated on a four-point scale. Pearson correlation coefficients were separately computed for patients with and without reported history of myocardial infarction (MI). For 37 patients without reported MI, CAD severity was significantly correlated with Overall Type A (r . -0.53), Vocal Characteristics (r . -0.53), Job Involvement (r . -0.36) and Aggressiveness (r . -0.48), but not Time Urgency (r . -0.25). For 16 patients with reported MI, CAD severity was significantly correlated with Job Involvement only (r . +0.49). The data are consistent with the association of Type A personality and coronary atherogenesis, but may also reflect Type A psychological and physiological characteristics. Future studies may be able to examine these and other aspects of Type A behavior using this noninvasive technique in more diverse patient populations

  18. Debris filtering effectiveness and pressure drop tests of debris resistance-bottom end piece

    International Nuclear Information System (INIS)

    Chung, Moon Ki; Song, Chul Hwa; Chung, Heung June; Won, Soon Yeun; Cho, Young Ro; Kim, Bok Deuk

    1992-03-01

    In this final report, described are the test conditions and test procedures for the debris filtering effectiveness and pressure drop tests for developing the Debris Resistance-Bottom End Piece (DR-BEP). And the test results are tabulated for later evaluation. (Author)

  19. Percieved Coercion, Resistance to Persuasion, and the Type A Behavior Pattern.

    Science.gov (United States)

    Carver, Charles S.

    1980-01-01

    Gender differences in resistance to stress are not rooted in recognition of coercive elements, but in differences in responding to coercive elements. Type As are particularly sensitive to threats to personal control. The critical difference may be in the frequency rather than the intensity of the stress. (JAC)

  20. Insulin resistance, role of metformin and other noninsulin therapies in pediatric type 1 diabetes

    Science.gov (United States)

    Type 1 diabetes mellitus (T1DM) in youth is a challenging chronic medical condition. Its management should address not only the glycemic control but also insulin resistance and cardiovascular disease risk factors which are increasingly recognized to be present in youth with TID. Current knowledge on...

  1. Explosive type of moderate-resistance training induces functional, cardiovascular, and molecular adaptations in the elderly

    DEFF Research Database (Denmark)

    Beltran Valls, Maria Reyes; Dimauro, Ivan; Brunelli, Andrea

    2014-01-01

    of 12 weeks of low-frequency, moderate-intensity, explosive-type resistance training (EMRT) on muscle strength and power in old community-dwelling people (70-75 years), monitoring functional performance linked to daily living activities (ADL) and cardiovascular response, as well as biomarkers of muscle...

  2. Nanoscale Cross-Point Resistive Switching Memory Comprising p-Type SnO Bilayers

    KAUST Repository

    Hota, Mrinal Kanti; Hedhili, Mohamed N.; Wang, Qingxiao; Melnikov, Vasily; Mohammed, Omar F.; Alshareef, Husam N.

    2015-01-01

    Reproducible low-voltage bipolar resistive switching is reported in bilayer structures of p-type SnO films. Specifically, a bilayer homojunction comprising SnOx (oxygen-rich) and SnOy (oxygen-deficient) in nanoscale cross-point (300 × 300 nm2

  3. Insulin resistance and cognitive performance in type 2 diabetes : The Maastricht study

    NARCIS (Netherlands)

    Geijselaers, Stefan L C; Sep, Simone J S; Schram, Miranda T; van Boxtel, Martin P J; Henry, Ronald M A; Verhey, Frans R J; Kroon, Abraham A; Schaper, Nicolaas C; Dagnelie, Pieter C; van der Kallen, Carla J H; Stehouwer, Coen D A; Biessels, Geert Jan

    AIMS: Type 2 diabetes, hyperinsulinemia, and insulin resistance are associated with cognitive impairment. Experimental studies indicate that insulin signaling in the brain is related to cognitive performance. Here we evaluated whether insulin-related variables contribute to the variance in cognitive

  4. Low dose spironolactone reduces blood pressure in patients with resistant hypertension and type 2 diabetes mellitus

    DEFF Research Database (Denmark)

    Stolzenburg Oxlund, Christina; Henriksen, J. E.; Tarnow, L.

    2013-01-01

    frequent adverse event leading to dose reduction in three cases and discontinuation in one, whereas gynaecomastia was not reported.Conclusion:Low dose spironolactone exerts significant BP and urinary albumin creatinine ratio lowering effects in high-risk patients with resistant hypertension and type 2...

  5. Test report dot7A type A liquid packaging

    Energy Technology Data Exchange (ETDEWEB)

    Ketusky, E. T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Brandjes, C. [Ameriphysics LLC, Knoxville, TN (United States); Benoit, T. J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-09-19

    This section presents a general description of the DOT Specification 7A Type A liquid content packaging (HVYTAL), the liquid content evaluated as its payload, acceptable payload shipping configurations and features special to its use. This test report documents compliance with the regulatory safety requirements of 49 CFR Parts 173.24, 173.24a, 173.27, 173.410, 173.412, 173.461 – 173.466 and 178.350.

  6. HEAT ENGINEERING TESTING OF AIR COOLING UNIT OF HORIZONTAL TYPE

    OpenAIRE

    Rohachov, Valerii Andriiovych; Semeniako, Oleksandr Volodymyrovych; Лазоренко, Р. О.; Середа, Р. М.; Parafeinyk, Volodymyr Petrovych

    2018-01-01

    The results of the thermal tests of the section of air cooler, the heat-exchange surface of which is made up of chess package of bimetal finned tubes are presented. The methods of research are presented, the experimental stand is described, the measurement errors are given. The efficiency of the experimental stand and the accuracy of the experimental data on it are confirmed. Proposed to use the stand for researches of air cooling units with other types and sections of finned tubes.

  7. Thermal characteristic test for saturated temperature type capsule

    International Nuclear Information System (INIS)

    Niimi, Motoji; Someya, Hiroyuki; Kobayashi, Toshiki; Ohuchi, Mitsuo; Harayama, Yasuo

    1989-08-01

    The Japan Material Testing Reactor Project is developing a new type capsule so-called 'Saturated Temperature Capsule', as a part of irradiation technique improvement program. This type capsule, in which the water is supplied and boiled, bases on the conception of keeping the coolant at the saturated temperature and facilitating the temperature setting of specimens heated by gamma-ray in reactor. However, out-pile test was planned, because there were few usable data for design and operation of the capsule into which the coolant was injected. A out-pile apparatus, simulated the capsule with electric heaters, was fabricated and experiments were carried out, to obtain data concerning design and operation for the capsule into which the water was injected. As a structure of simulated capsule, a type of downward coolant supply was adopted. The downward coolant tube type injectes the water in the bottom of capsule by tube through the upper flange. Major objects of experiences were to grasp thermal features under operation and to provide performances of capsule control equipment. Experimental results proved that the temperature of water within the capsule was easily varied by controlling supply water flow rate, and that the control equipment was operated stably and safety. (author)

  8. Characterisation of recently emerged multiple antibiotic-resistant Salmonella enterica serovar typhimurium DT104 and other multiresistant phage types from Danish pig herds

    DEFF Research Database (Denmark)

    Baggesen, Dorte Lau; Aarestrup, Frank Møller

    1998-01-01

    electrophoresis (PFGE) using the restriction enzyme Xba I, Overall, 66 per cent of the 670 isolates were sensitive to all the antimicrobial agents tested. Eleven isolates of S typhimurium were resistant to ampicillin, streptomycin and tetracycline and also resistant to other antibiotics in different resistance...... patterns. Seven different multiresistant clones were identified, The most common clones were four isolates of DT104 and three isolates of DT193, TWO Of the three S typhimurium DT104 from 1994 and 1995 were sensitive to all the antimicrobials tested whereas the remaining isolate from 1994 was resistant......A total of 670 isolates of Salmonella enterica were isolated from Danish pig herds, phage typed and tested for susceptibility to amoxycillin + clavulanate, ampicillin, colistin, enrofloxacin, gentamicin, neomycin, spectinomycin, streptomycin, tetracyclines, and trimethoprim + sulphadiazine. S...

  9. FIVPET Flow-Induced Vibration Test Report (1) - Candidate Spacer Grid Type I (Optimized H Type)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Hee; Kang, Heung Seok; Yoon, Kyung Ho; Song, Kee Nam; Kim, Jae Yong

    2006-03-15

    The flow-induced vibration (FIV) test using a 5x5 partial fuel assembly was performed to evaluate mechanical/structural performance of the candidate spacer grid type I (Optimized H shape). From the measured vibration response of the test bundle and the flow parameters, design features of the spacer strap can be analyzed in the point of vibration and hydraulic aspect, and also compared with other spacer strap in simple comparative manner. Furthermore, the FIV test will contributes to understand behaviors of nuclear fuel in operating reactor. The FIV test results will be used to verify the theoretical model of fuel rod and assembly vibration. The aim of this report is to present the results of the FIV test of partial fuel assembly and to introduce the detailed test methodology and analysis procedure. In chapter 2, the overall configuration of test bundle and instrumented tube is remarked and chapter 3 will introduce the test facility (FIVPET) and test section. Chapter 4 deals with overall test condition and procedure, measurement and data acquisition devices, instrumentation equipment and calibration, and error analysis. Finally, test result of vibration and pressure fluctuation is presented and discussed in chapter 5.

  10. Experimental verification of temperature coefficients of resistance for uniformly doped P-type resistors in SOI

    Science.gov (United States)

    Olszacki, M.; Maj, C.; Bahri, M. Al; Marrot, J.-C.; Boukabache, A.; Pons, P.; Napieralski, A.

    2010-06-01

    Many today's microsystems like strain-gauge-based piezoresistive pressure sensors contain doped resistors. If one wants to predict correctly the temperature impact on the performance of such devices, the accurate data about the temperature coefficients of resistance (TCR) are essential. Although such data may be calculated using one of the existing mobility models, our experiments showed that we can observe the huge mismatch between the calculated and measured values. Thus, in order to investigate the TCR values, a set of the test structures that contained doped P-type resistors was fabricated. As the TCR value also depends on the doping profile shape, we decided to use the very thin, 340 nm thick SOI wafers in order to fabricate the quasi-uniformly doped silicon layers ranging from 2 × 1017 at cm-3 to 1.6 × 1019 at cm-3. The results showed that the experimental data for the first-order TCR are quite far from the calculated ones especially over the doping range of 1018-1019 at cm-3 and quite close to the experimental ones obtained by Bullis about 50 years ago for bulk silicon. Moreover, for the first time, second-order coefficients that were not very consistent with the calculations were obtained.

  11. Experimental verification of temperature coefficients of resistance for uniformly doped P-type resistors in SOI

    International Nuclear Information System (INIS)

    Olszacki, M; Maj, C; Al Bahri, M; Marrot, J-C; Boukabache, A; Pons, P; Napieralski, A

    2010-01-01

    Many today's microsystems like strain-gauge-based piezoresistive pressure sensors contain doped resistors. If one wants to predict correctly the temperature impact on the performance of such devices, the accurate data about the temperature coefficients of resistance (TCR) are essential. Although such data may be calculated using one of the existing mobility models, our experiments showed that we can observe the huge mismatch between the calculated and measured values. Thus, in order to investigate the TCR values, a set of the test structures that contained doped P-type resistors was fabricated. As the TCR value also depends on the doping profile shape, we decided to use the very thin, 340 nm thick SOI wafers in order to fabricate the quasi-uniformly doped silicon layers ranging from 2 × 10 17 at cm −3 to 1.6 × 10 19 at cm −3 . The results showed that the experimental data for the first-order TCR are quite far from the calculated ones especially over the doping range of 10 18 –10 19 at cm −3 and quite close to the experimental ones obtained by Bullis about 50 years ago for bulk silicon. Moreover, for the first time, second-order coefficients that were not very consistent with the calculations were obtained.

  12. Frictional resistance of orthodontic wires tied with 3 types of elastomeric ligatures

    Directory of Open Access Journals (Sweden)

    Amanda Carneiro da Cunha

    2011-12-01

    Full Text Available The aims of this study were to determine and compare frictional resistance obtained by low-friction and conventional elastomeric ligatures in the presence of artificial saliva, and observe whether this variable changed after 21 days. Super Slick® low-friction elastomeric ligatures and conventional ligatures of the brands TP conventional® and Unitek® were placed on standard edgewise maxillary central incisor metal brackets, slot .022" × .028" tying rectangular orthodontic wires .018" × .025". Three experimental groups were arranged according to the type of ligature and a control group in which no wires were used. The friction values obtained between the bracket/wire/ligature set were measured using a Universal Test Machine at a speed of 20 mm/minute, at two experimental time intervals: T0 - immediately after specimen fabrication; and T1 - 21 days after fabrication and immersion in artificial saliva at 37 ºC. Conventional Unitek ligatures and the low-friction ligature (Super Slick showed the lowest friction values at T0. After 21 days (T1, however, conventional Unitek ligatures presented the lowest value. All groups assessed from T0 to T1 showed a numerical reduction in friction values, suggesting that time, heat and humidity may cause elastic degradation, however this was not verified statistically (P > 0.05.

  13. Mechanical resistance of UO{sub 2} pellet by means of free-fall-impact testing

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Tae-sik; Lee, Seung-jae; Kim, Jae-ik; Jo, Young-ho; Park, Bo-yong; Ko, Sang-ern [KEPCO NF, Daejeon (Korea, Republic of)

    2014-10-15

    A fuel rod failed during a power transient can be seen in Fig 1. and conjunction of a chipped pellet with a cladding crack has been observed in commercial reactors through the post-irradiation examinations. It revealed that missing-pellet-surface(MPS) was one of the reasons of the fuel failure. The mechanism of this failure mode that MPS induces the asymmetry of the pellet-cladding mechanical system mainly comprises a stress concentration at the inner surface resulting in non-classical PCI. The fracture toughness is largely close to material property. It is assumed that by optimizing surface design of UO{sub 2} pellet, the strength arises because theoretical strength is considerably affected by geometry as one of a parameter of factor 'f'. Pellet research for design optimization to achieve better resistance to external load should be accompanied with volumetric approach to the improvement of mechanical behavior of pellet being still ongoing. At this work, the resistance to external load is analyzed varying with the geometry of pellets and angles of impact on UO{sub 2} pellet surface by the free-fall-impact test method. The tested specimens were equivalently produced and sintered for having the same volumetric property such as sinter density and grain size expect the surface with different geometry design at the end face and shoulder which includes dish, chamfer and land in dimension and angle. Missing-pellet-surface(MPS) on UO{sub 2} pellet is inevitable behavior during manufacturing, handling and burning in reactor and brings about non-classical PCI behavior that could damage fuel rod integrity. For this reason, the free-fall-drop tester was developed by KEPCO NF Material Development laboratory in Daejeon for quantitatively investigating the mechanical behavior of UO{sub 2}. The free-fall-impact test is performed by dropping hammer on pellet shoulder with certain impact energy and at various angles. The result is quantitatively measured with weighing

  14. Evaluation of a rapid screening test for rifampicin resistance in re ...

    African Journals Online (AJOL)

    Sensitivity, specificity and overall accuracy of the phage test were determined compared with gold standard culture and DST. Discrepant results were resolved by molecular detection of mutations conferring rifampicin resistance. The proportion of rifampicin-resistant strains that were MDR was also determined. Results.

  15. MANUFACTURING AND TESTING OF A V-TYPE STIRLING ENGINE

    Directory of Open Access Journals (Sweden)

    B. Demir

    2012-01-01

    Full Text Available In this study, a V-type Stirling engine with 163 cc total swept volume was designed and manufactured. Air was used as working fluid. Performance tests were conducted at the range of 1-3 bar charge pressure and within the range of hot source temperature 700-1050 °C. Experimental results are given. Variation of engine power and torque with hot source temperature at various air charge pressure are tested. Also variation of engine torque with engine speed for different air charge pressure are tested. According to experimental analysis, the maximum engine power was obtained as 21.334 W at 1050 ˚C hot source temperature and 1.5 bars charge pressure.

  16. Cryogenic distribution system for ITER proto-type cryoline test

    International Nuclear Information System (INIS)

    Bhattacharya, R.; Shah, N.; Badgujar, S.; Sarkar, B.

    2012-01-01

    Design validation for ITER cryoline will be carried out by proto-type test on cryoline. The major objectives of the test will be to ensure the mechanical integrity, reliability, thermal stress and heat load as well as checking of assembly and fabrication procedures. The cryogenics system has to satisfy the functional operating scenario of the cryoline. Cryoplant, distribution box (DB) including liquid helium (LHe) tank constitute the cryogenic system for the test. Conceptual system architecture is proposed with a commercially available refrigerator/liquefier and custom designed DB housing cold compressor, cold circulator as well as phase separator with sub-merged heat exchanger. System level optimization, mainly with DB and LHe tank with options, has been studied to minimize the cold power required for the system. Aspen HYSYS is used for the purpose of process simulation. The paper describes the system architecture and the optimized design as well as process simulation with associated results. (author)

  17. Husky Oil seeks to test new type of waterflood

    Energy Technology Data Exchange (ETDEWEB)

    1965-04-05

    Husky Oil Canada Ltd. is seeking approval from the Alberta Oil and Gas Conservation Board for a new type of water injection at its pilot waterflood test operation in the Lloydminster oil field. Husky has asked permission to modify and enlarge its pilot test to allow injection through the pilot wells of 100,000 bbl of fresh water derived from surface ponds in the vicinity. About 70,000 bbl will be treated with a test polymer to increase its viscosity to 60 cp. Producing the central pilot well until excessive production of polymer occurs has been proposed. It is hoped that the proposed program will verify that oil banks can be created with viscous fluid inside and outside the pilot area.

  18. A regulator's perspective on physical testing for type B packages

    International Nuclear Information System (INIS)

    Brach, William E.

    2004-01-01

    The U.S. Nuclear Regulatory Commission has a great deal of experience certifying Type B transport packages as complying with the regulations in 10 CFR Part 71. With this experience base, supporting risk studies, and with an exceptional historical safety record for transport, we are very confident in both the current regulations and the methods we use to review and certify transportation packages. Nevertheless, we have a responsibility to remain vigilant and review our regulations and implementing practices with a view towards continuous improvement. NRC regulations permit certification through testing, analyses, comparison to similar approved designs, or combinations of these methods. Testing can be further broken into scale models, components, simple models, or full-scale models. NRC does not require full-scale testing for certification of any package; however, many applicants for package certification have conducted a physical testing program to demonstrate that the package design meets the hypothetical accident conditions. The plans for a repository at Yucca Mountain have raised significant interest in the United States of America in transportation of spent fuel, and created a broad stakeholder and public interest in transportation package testing. As an expected large increase in the number of spent fuel transports nears, this interest will likely grow. The technical and regulatory reasons for, or for not, performing tests need to be well understood and communicated to all stakeholders

  19. Processing and first characterization of detectors made with high resistivity n- and p-type Czochralski silicon

    International Nuclear Information System (INIS)

    Bruzzi, M.; Bisello, D.; Borrello, L.; Borchi, E.; Boscardin, M.; Candelori, A.; Creanza, D.; Dalla Betta, G.-F.; DePalma, M.; Dittongo, S.; Focardi, E.; Khomenkov, V.; Litovchenko, A.; Macchiolo, A.; Manna, N.; Menichelli, D.; Messineo, A.; Miglio, S.; Petasecca, M.; Piemonte, C.; Pignatel, G.U.; Radicci, V.; Ronchin, S.; Scaringella, M.; Segneri, G.; Sentenac, D.; Tosi, C.; Zorzi, N.

    2005-01-01

    We report on the design, manufacturing and first characterisation of pad diodes, test structures and microstrip detectors processed with high resistivity magnetic Czochralski (MCz) p- and n-type Si. The pre-irradiation study on newly processed microstrip detectors and test structures show a good overall quality of the processed wafers. After irradiation with 24 GeV/c protons up to 4x10 14 cm -2 the characterisation of n-on-p and p-on-n MCz Si sensors with the C-V method show a decrease of the full depletion voltage and no space charge sign inversion. Microscopic characterisation has been performed to study the role of thermal donors in Czochralski Si. No evidence of thermal donor activation was observed in n-type MCz Si detectors if contact sintering was performed at a temperature lower than 380 deg. C and the final passivation oxide was omitted

  20. Prevalence of coagulase-negative staphylococci and determination of antimicrobial resistance in accompany with types of SCCmec in isolated of nosocomial infections

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Arabestani

    2016-03-01

    Full Text Available Background: Coagulase-negative staphylococci (CoNS were considered as contaminats previously, but, during the past decade considered as one of the most common photogenic bacteria in hospital. Resistance to beta-lactams especially methicillin in staphylococcus species is being worrying in hospitals. Rapid identification of mechanisms of resistance and confirmation of their resistance to methicillin is a basic principle for antibiotic treatment. The aim of this study was to determine antibiotic resistance, frequency of mecA gene, and determination of SCCmec types in CoNS isolates from teaching hospitals in Iran. Methods: The descriptive cross-sectional study was carried out one hundred clinical samples isolated from patients with an average age of 7-69 years at teaching hospitals in Hamadan City, Iran, from September 2014 to February 2015. After confirmation of isolates by microbiological standard biochemical tests, antimicrobial susceptibility testing was performed by disk agar diffusion (DAD method. After extraction of isolated genomicm, mecA gene was detected. Then, the types of SCCmec were performed by PCR. Results: In this study, 387 clinical samples were collected which among 100 CoNS isolated, Staphylococcus epidermidis was the most prevalent species with frequency 55 (55%, followed by S. haemolyticus 40(40% and S. saprophyticus 5(5%. The highest antibiotic susceptibility was to rifampin 96(96% and the lowest resistance was detected for trimethoprim/sulfamethoxazole (TMP/SMX 47(47%. None of the strains were resistant to vancomycin. Resistance to methicillin was detected in 50% of CoNS isolates. Typing of SCCmec was performed by The polymerase chain reaction (PCR. Frequency types of SCCmec was type III with frequency 13(13%, type V 11(11%, type II 6(6%, type IV 4 (4%, type I 3(3% respectively. Thirteen isolated was not typable in this study. Conclusion: The result of this study showed that a large percentage of coagulase

  1. [Severe type A insulin resistance syndrome due to a mutation in the insulin receptor gene].

    Science.gov (United States)

    Ros, P; Colino-Alcol, E; Grasso, V; Barbetti, F; Argente, J

    2015-01-01

    Insulin resistance syndromes without lipodystrophy are an infrequent and heterogeneous group of disorders with variable clinical phenotypes, associated with hyperglycemia and hyperinsulinemia. The three conditions related to mutations in the insulin receptor gene are leprechaunism or Donohue syndrome, Rabson-Mendenhall syndrome, and Type A syndrome. A case is presented on a patient diagnosed with type A insulin resistance, defined by the triad of extreme insulin resistance, acanthosis nigricans, and hyperandrogenism, carrying a heterozygous mutation in exon 19 of the insulin receptor gene coding for its tyrosine kinase domain that is crucial for the catalytic activity of the receptor. The molecular basis of the syndrome is reviewed, focusing on the structure-function relationships of the insulin receptor, knowing that the criteria for survival are linked to residual insulin receptor function. It is also pointed out that, although type A insulin resistance appears to represent a somewhat less severe condition, these patients have a high morbidity and their treatment is still unsatisfactory. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

  2. Association between insulin resistance and risk of complications in children and adolescents with type 1 diabetes.

    Science.gov (United States)

    Krochik, Andrea G; Botto, Marianela; Bravo, Mónica; Hepner, Mirta; Frontroth, Juan P; Miranda, Miguel; Mazza, Carmen

    2015-01-01

    It has been hypothesized that insulin resistance may be involved in the development of type 1 diabetes complications and early diagnosis would be important for their prevention. Our aim was to study insulin resistance in our population of children with type 1 diabetes and to identify associated early risk factors for micro- and macrovascular complications. A descriptive, cross-sectional study was conducted including 150 children with type 1 diabetes. Anthropometric, bioelectric impedance, carotid Doppler ultrasonography, electromyography, and conduction velocity studies were performed. Baseline plasma glucose, lipid profile, uric acid, plasma thyrotropin, glycosylated hemoglobin A1C, and microalbuminuria were assessed. More insulin-resistant patients were defined as those having an estimated glucose disposal rate (eGDR) value below the first quartile. Clinically manifest microvascular complications were not found in any of the patients. More insulin-resistant patients had a greater sub scapular fold thickness, a higher incidence of obesity (12% vs. 1.7% p 0.007), higher fructosamine levels (496 vs. 403 p19, and a higher incidence of altered lipid metabolism (70% vs. 39% p 0.0007). In the subgroup of patients with lower eGDR there were more children with lipid disorders, obesity, and worse diabetic control, which, if not corrected, may lead to development of micro- and macrovascular complications. Copyright © 2014 Diabetes India. Published by Elsevier Ltd. All rights reserved.

  3. Evolution of high yielding chickpea varieties, having improved plant type and disease resistance, through induced mutations

    International Nuclear Information System (INIS)

    Sadiq, M.; Hussan, M.; Haq, M.A.

    1989-01-01

    The breeding programme on the use of induced mutations, in chickpea for genetic variability for better plant type, grain yield and disease resistance has been started. The chickpea mutant variety is one of the leading varieties being extensively grown throughout Pakistan and has played its role in stabilizing the chickpea production in the country. Four chickpea varieties were treated, each with two dosed of gamma rays. The main purpose of the mutagenic treatment of these varieties/cultivars, was induce multiple resistance. (A.B.)

  4. Study of recovery characteristics of 2nd generation HTS tapes with different stabilizers for resistive type superconducting fault current limiters

    International Nuclear Information System (INIS)

    Sheng, Jie; Zeng, Weina; Ma, Jun; Yao, Zhihao; Li, Zhuyong; Jin, Zhijian; Hong, Zhiyong

    2016-01-01

    Highlights: • Three methods of measuring the recovery time of HTS tapes are compared. • Four tapes with different stabilizers were tested to compare their recovery characteristics. • The HTS tapes with thinner stabilizers have better recovery characteristics. • Encapsulation makes the recovery characteristics of HTS tapes worse. • The results can be reference of the re-reclosed operation time interval. - Abstract: The resistive type superconducting fault current limiter (SFCL) is one of the most important superconducting power applications nowadays. As known, this type of SFCL is settled directly in the power transmission line. When a short fault happens, the temperature of the superconductors in the SFCL will increase sharply due to the huge generated heat. This means the superconductors need time to recover the superconducting properties and be ready for the next short fault. So the recovery characteristics become one of the most crucial features of the resistive type SFCL. In this paper, several different kinds of measuring methods are presented to calculate the recovery time of the HTS tapes, and comparison of these methods is also carried out by a standard test. On basis of this, samples with different kinds of stabilizers are used to explore the influence of stabilizer on their recovery characteristics. In addition, the influence of the encapsulation technology is also discussed in this paper.

  5. Contribution of AcrAB-ToIC to multidrug resistance in an Escherichia coli sequence type 131 isolate

    NARCIS (Netherlands)

    Schuster, Sabine; Vavra, Martina; Schweigger, Tobias M.; Rossen, John W. A.; Matsumura, Yasufumi; Kern, Winfried V.

    Drug efflux by resistance-nodulation-cell division (RND)-type transporters, such as AcrAB-ToIC of Escherichia can, is an important resistance mechanism in Gram-negative bacteria; however, its contribution to multidrug resistance (MDR) in clinical isolates is poorly defined. We inactivated acrB of a

  6. Serum fetuin-A associates with type 2 diabetes and insulin resistance in Chinese adults.

    Directory of Open Access Journals (Sweden)

    Aiyun Song

    2011-04-01

    Full Text Available Previous studies have demonstrated that fetuin-A is related to insulin resistance among subjects with normal glucose tolerance but not patients with type 2 diabetes. There are limited data available concerning fetuin-A and insulin resistance in Chinese. We aimed to study the association of fetuin-A with insulin resistance among participants with or without type 2 diabetes in a large sample size of adults aged 40 and older.A community-based cross-sectional study was performed among 5,227 Chinese adults. The average age of our study was 61.5±9.9 years. Serum fetuin-A concentrations were not significantly different between male and female (296.9 vs. 292.9 mg/l, p = 0.11. Compared with the lowest quartile, the highest quartile of serum fetuin-A revealed a significant higher proportion of type 2 diabetic patients (34.8% vs. 27.3%, p<0.0001. In the multinomial logit models, the risk of type 2 diabetes was associated with each one quartile increase of serum fetuin-A concentrations when referenced not only to normal glucose tolerance (OR 1.24, 95% CI 1.07-1.43, p = 0.004 but also to impaired glucose regulation (OR 1.25, 95% CI 1.08-1.44, p = 0.003, respectively, after adjustment for age, sex, community, current smoking, and current drinking. The logistic regression analysis showed that fetuin-A were associated with elevated HOMA-IR and fasting serum insulin both among the participants with or without type 2 diabetes in the full adjusted analysis. There was no significant association between elevated serum fetuin-A concentrations and impaired glucose regulation (all p≥0.12.Higher fetuin-A concentrations were associated with type 2 diabetes and insulin resistance in middle aged and elderly Chinese.

  7. Novel adiponectin-resistin (AR and insulin resistance (IRAR indexes are useful integrated diagnostic biomarkers for insulin resistance, type 2 diabetes and metabolic syndrome: a case control study

    Directory of Open Access Journals (Sweden)

    Muniandy Sekaran

    2011-01-01

    Full Text Available Abstract Background Adiponectin and resistin are adipokines which modulate insulin action, energy, glucose and lipid homeostasis. Meta-analyses showed that hypoadiponectinemia and hyperresistinemia are strongly associated with increased risk of insulin resistance, type 2 diabetes (T2DM, metabolic syndrome (MS and cardiovascular disease. The aim of this study was to propose a novel adiponectin-resistin (AR index by taking into account both adiponectin and resistin levels to povide a better indicator of the metabolic homeostasis and metabolic disorders. In addition, a novel insulin resistance (IRAR index was proposed by integration of the AR index into an existing insulin resistance index to provide an improved diagnostic biomarker of insulin sensitivity. Methods In this case control study, anthropometric clinical and metabolic parameters including fasting serum total adiponectin and resistin levels were determined in 809 Malaysian men (208 controls, 174 MS without T2DM, 171 T2DM without MS, 256 T2DM with MS whose ages ranged between 40-70 years old. Significant differences in continuous variables among subject groups were confirmed by ANCOVA or MANCOVA test using 1,000 stratified bootstrap samples with bias corrected and accelerated (BCa 95% CI. Spearman's rho rank correlation test was used to test the correlation between two variables. Results The AR index was formulated as 1+log10(R0-log10(A0. The AR index was more strongly associated with increased risk of T2DM and MS than hypoadiponectinemia and hyperresistinemia alone. The AR index was more strongly correlated with the insulin resistance indexes and key metabolic endpoints of T2DM and MS than adiponectin and resistin levels alone. The AR index was also correlated with a higher number of MS components than adiponectin and resistin levels alone. The IRAR index was formulated as log10(I0G0+log10(I0G0log10(R0/A0. The normal reference range of the IRAR index for insulin sensitive individuals was

  8. Influence of previous experience on resistance training on reliability of one-repetition maximum test.

    Science.gov (United States)

    Ritti-Dias, Raphael Mendes; Avelar, Ademar; Salvador, Emanuel Péricles; Cyrino, Edilson Serpeloni

    2011-05-01

    The 1-repetition maximum test (1RM) has been widely used to assess maximal strength. However, to improve accuracy in assessing maximal strength, several sessions of the 1RM test are recommended. The aim of this study was to analyze the influence of previous resistance training experience on the reliability of 1RM test. Thirty men were assigned to the following 2 groups according to their previous resistance training experience: no previous resistance training experience (NOEXP) and more than 24 months of resistance training experience (EXP). All subjects performed the 1RM tests in bench press and squat in 4 sessions on distinct days. There was a significant session × group effect in bench press (F = 3.09; p reliability of the 1RM test is influenced by the subject's previous experience in resistance training. Subjects without experience in resistance training require more practice and familiarization and show greater increases in maximal strength between sessions than subjects with previous experience in resistance training.

  9. Metabolic markers associated with insulin resistance predict type 2 diabetes in Koreans with normal blood pressure or prehypertension.

    Science.gov (United States)

    Sung, Ki-Chul; Park, Hyun-Young; Kim, Min-Ju; Reaven, Gerald

    2016-03-22

    Questions remain as to the association between essential hypertension and increased incidence of type 2 diabetes (T2DM). The premise of this analysis is that insulin resistance/compensatory hyperinsulinemia is a major predictor of T2DM, and the greater the prevalence of insulin resistance within any population, normotensive or hypertensive, the more likely T2DM will develop. The hypothesis to be tested is that surrogate estimates of insulin resistance will predict incident T2DM to a significant degree in persons with normal blood pressure or prehypertension. Analysis of data from a population-based survey of 10, 038 inhabitants of rural and urban areas of Korea, ≥40 years-old, initiated in 2001, with measures of demographic and metabolic characteristics at baseline and 8-years later. Participants were classified as having normal blood pressure or prehypertension, and three simple manifestations of insulin resistance related to the pathophysiology of T2DM used to predict incident T2DM: (1) glycemia (plasma glucose concentration 2-hour after 75 g oral glucose challenge = 2-hour PG); (2) hyperinsulinemia (plasma insulin concentration 2-hour after 75 g oral glucose challenge = 2-hour PI); and (3) dyslipidemia (ratio of fasting plasma triglyceride/high/density lipoprotein cholesterol concentration = TG/HDL-C ratio). Fully adjusted hazard ratios (HR, 95 % CI) for incident T2DM were highest (P insulin resistance was the 2-hour PI concentration. Subjects with normal blood pressure in the highest quartile of 2-hour PI concentrations were significantly associated with incident T2DM, with HRs of 1.5 (1.02-2.20, P = 0.25) and 2.02 (1.35-3.02, P insulin resistance (glycemia, insulinemia, and dyslipidemia) predict the development of T2DM in patients with either normal blood pressure or prehypertension.

  10. An Improved MLVF Method and Its Comparison with Traditional MLVF, spa Typing, MLST/SCCmec and PFGE for the Typing of Methicillin-Resistant Staphylococcus aureus

    Science.gov (United States)

    Du, Xue-Fei; Xiao, Meng; Liang, Hong-Yan; Sun, Zhe; Jiang, Yue-Hong; Chen, Guo-Yu; Meng, Xiao-Yu; Zou, Gui-Ling; Zhang, Li; Liu, Ya-Li; Zhang, Hui; Sun, Hong-Li; Jiang, Xiao-Feng; Xu, Ying-Chun

    2014-01-01

    Methicillin-resistant Staphylococcus aureus (MRSA) has become an important nosocomial pathogen, causing considerable morbidity and mortality. During the last 20 years, a variety of genotyping methods have been introduced for screening the prevalence of MRSA. In this study, we developed and evaluated an improved approach capillary gel electrophoresis based multilocus variable-number tandem-repeat fingerprinting (CGE/MLVF) for rapid MRSA typing. A total of 42 well-characterized strains and 116 non-repetitive clinical MRSA isolates collected from six hospitals in northeast China between 2009 and 2010 were tested. The results obtained by CGE/MLVF against clinical isolates were compared with traditional MLVF, spa typing, Multilocus sequence typing/staphylococcal cassette chromosome mec (MLST/SCCmec) and pulse field gel electrophoresis (PFGE). The discriminatory power estimated by Simpson’s index of diversity was 0.855 (28 types), 0.855 (28 patterns), 0.623 (11 types), 0.517 (8 types) and 0.854 (28 patterns) for CGE/MLVF, traditional MLVF, spa typing, MLST/SCCmec and PFGE, respectively. All methods tested showed a satisfied concordance in clonal complex level calculated by adjusted Rand’s coefficient. CGE/MLVF showed better reproducibility and accuracy than traditional MLVF and PFGE methods. In addition, the CGE/MLVF has potential to produce portable results. In conclusion, CGE/MLVF is a rapid and easy to use MRSA typing method with lower cost, good reproducibility and high discriminatory power for monitoring the outbreak and clonal spread of MRSA isolates. PMID:24406728

  11. Resistance of Type 5 chemical protective clothing against nanometric airborne particles: Behavior of seams and zipper.

    Science.gov (United States)

    Vinches, Ludwig; Hallé, Stéphane

    2017-12-01

    In the field of dermal protection, the use of chemical protective clothing (CPC) (including coveralls) are considered as the last barrier against airborne engineered nanomaterials (ENM). In the majority of cases, Type 5 CPC, used against solid particles (ISO 13982-1), perform well against ENM. But in a recent study, a penetration level (PL) of up to 8.5% of polydisperse sodium chloride airborne nanoparticles has been measured. Moreover, in all the previous studies, tests were performed on a sample of protective clothing material without seams or zippers. Thus, the potential for permeation through a zipper or seams has not yet been determined, even though these areas would be privileged entry points for airborne ENM. This work was designed to evaluate the PL of airborne ENM through coveralls and specifically the PL through the seams on different parts of the CPC and the zipper. Eight current models of CPC (Type 5) were selected. The samples were taken from places with and without seams and with a zipper. In some cases, a cover strip can be added to the zipper to enhance its sealing. Polydisperse nanoparticles were generated by nebulization of a sodium chloride solution. A penetration cell was developed to expose the sample to airborne nanometric particles. The NaCl particle concentration in number was measured with an ultrafine particle counter and the PL was defined as the downstream concentration divided by the upstream concentration. The results obtained show that the PL increased significantly in the presence of seams and could reach up to 90% depending on the seam's design. Moreover, this study classifies the different types of seams by their resistance against airborne ENM. As for the penetration of airborne NaCl particles through the zipper, the PL was greatly attenuated by the presence of a cover strip, but only for certain models of coveralls. Finally, the values of the pressure drop were directly linked to the type of seam. All of these conclusions provide

  12. On possibility to make a new type of calorimeter: radiation resistant and fast

    International Nuclear Information System (INIS)

    Derevshchikov, A.A.; Khodyrev, V.Yu.; Kryshkin, V.I.; Rakhmatov, V.E.; Ronzhin, A.I.

    1990-01-01

    It is proposed to use electron multipliers, which directly detect low energy shower particles as an active element in sandwich calorimeters. The approach pffers fast and radiation resistant calorimetry. Test of the method is presented with the use of a microchannel plate. 4 refs.; 4 figs

  13. The identification of carbapenemase types in Enterobacteriaceae by using molecular assay and phenotyping confirmation tests.

    Science.gov (United States)

    Genc, Ozlem; Aksu, Evrim; Gulcan, Aynur

    2016-06-01

    In this study, we aimed to identify the molecular carbapenemase types of the Enterobacteriaceae isolates and to evaluate the performance of manually prepared and commercially available combination disc methods and the modified Hodge test. One hundred and forty carbapenemase producing isolates and 45 isolates as control group were included in our study. The Xpert CARBA-R test was used as the molecular method. Antibiotic susceptibility tests were performed using combined discs, manually prepared with APBA (3-aminophenyl boronic acid), DPA (dipicolinic acid), EDTA (Ethylene diamine tetra acetic acid), cloxacillin supplements and Mastdiscs Combi-D70C that includes four antibiotic discs with specific inhibitors and temocillin discs. The modified Hodge test was performed on all isolates. OXA-48 gene was identified in 129 isolates , the NDM gene was identified in 10 isolates and VIM in one isolate. Thirty inaccurate results (30/185, 16%) were detected by using the manually prepared confirmation test. The sensitivity and specificity of this test were identified respectively 85% and 73%. Also, the sensitivity and specificity of the Mastdiscs Combi-D70C were identified as 100%. Negative results were detected in 3 NDM isolates with the use of a modified Hodge test. Sensitivity and specificity were calculated for the modified Hodge test respectively 97% and 100%. Finally, molecular methods provide results rapidly but they are not always easily accessible. The modified Hodge test can be used only for screening as a first step test and is not one of the tests that can identify the type of the carbapenemase. When carbapenem-resistant Enterobacteriaceae are detected, a commercial kit like Mastdiscs Combi-D70 may be preferred instead of the manually prepared phenotypic verification tests. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. A simple test procedure for evaluating low temperature crack resistance of asphalt concrete.

    Science.gov (United States)

    2009-11-01

    The current means of evaluating the low temperature cracking resistance of HMA relies on extensive test : methods that require assumptions about material behaviors and the use of complicated loading equipment. The purpose : of this study was to devel...

  15. Identification of VanN-type vancomycin resistance in an Enterococcus faecium isolate from chicken meat in Japan.

    Science.gov (United States)

    Nomura, Takahiro; Tanimoto, Koichi; Shibayama, Keigo; Arakawa, Yoshichika; Fujimoto, Shuhei; Ike, Yasuyoshi; Tomita, Haruyoshi

    2012-12-01

    Five VanN-type vancomycin-resistant Enterococcus faecium strains were isolated from a sample of domestic chicken meat in Japan. All isolates showed low-level resistance to vancomycin (MIC, 12 mg/liter) and had the same pulsed-field gel electrophoresis profile. The vancomycin resistance was encoded on a large plasmid (160 kbp) and was expressed constitutively. The VanN-type resistance operon was identical to the first resistance operon to be reported, with the exception of a 1-bp deletion in vanT(N) and a 1-bp substitution in vanS(N).

  16. Effect of Different Types of Toothpaste on the Frictional Resistance Between Orthodontic Stainless Steel Brackets and Wires.

    Science.gov (United States)

    Hosseinzadeh Nik, Tahereh; Hooshmand, Tabassom; Farhadifard, Homa

    2017-09-01

    The purpose of this study was to investigate the effect of different types of toothpaste on the frictional resistance between stainless steel brackets and archwires. Ninety stainless steel orthodontic brackets with stainless steel wires were bonded to bovine teeth and were divided into 6 groups for application of the following toothpastes: Colgate® Total® Advanced Whitening, Colgate® Total® Pro Gum Health, Colgate® Anticavity, Ortho.Kin®, and Sunstar GUM® Ortho toothpastes. No toothpaste was applied in the control group. Each group was brushed by a brushing machine with the use of the designated solution for 4.5 minutes. The frictional force was measured in a universal testing machine with a crosshead speed of 10 mm/minute over a 5-mm archwire. Data were analyzed using one-way analysis of variance (ANOVA) at the 0.05 significance level. The frictional resistance values of Ortho.Kin® and GUM® Ortho toothpastes and the control group were not significantly different (P>0.05). However, there were significant differences between the frictional resistance values of Colgate® Total® Pro Gum Health and Colgate® Anticavity toothpastes with that of the control group (Porthodontic toothpastes did not increase the frictional resistance between the orthodontic stainless steel brackets and wires.

  17. Performance of an in-house human immunodeficiency virus type 1 genotyping system for assessment of drug resistance in Cuba.

    Directory of Open Access Journals (Sweden)

    Yoan Alemán

    Full Text Available As commercial human immunodeficiency virus type 1 drug resistance assays are expensive, they are not commonly used in resource-limited settings. Hence, a more affordable in-house procedure was set up taking into account the specific epidemiological and economic circumstances of Cuba. The performance characteristics of the in-house assay were evaluated using clinical samples with various subtypes and resistance patterns. The lower limit of amplification was determined on dilutions series of 20 clinical isolates and ranged from 84 to 529 RNA copies/mL. For the assessment of trueness, 14 clinical samples were analyzed and the ViroSeq HIV-1 Genotyping System v2.0 was used as the reference standard. The mean nucleotide sequence identity between the two assays was 98.7% ± 1.0. Additionally, 99.0% of the amino acids at drug resistance positions were identical. The sensitivity and specificity in detecting drug resistance mutations was respectively 94.1% and 99.5%. Only few discordances in drug resistance interpretation patterns were observed. The repeatability and reproducibility were evaluated using 10 clinical samples with 3 replicates per sample. The in-house test was very precise as nucleotide sequence identity among paired nucleotide sequences ranged from 98.7% to 99.9%. The acceptance criteria were met by the in-house test for all performance characteristics, demonstrating a high degree of accuracy. Subsequently, the applicability in routine clinical practice was evaluated on 380 plasma samples. The amplification success rate was 91% and good quality consensus sequences encoding the entire protease and the first 335 codons in reverse transcriptase could be obtained for 99% of the successful amplicons. The reagent cost per sample using the in-house procedure was around € 80 per genotyping attempt. Overall, the in-house assay provided good results, was feasible with equipment and reagents available in Cuba and was half as expensive as commercial

  18. Performance of an in-house human immunodeficiency virus type 1 genotyping system for assessment of drug resistance in Cuba.

    Science.gov (United States)

    Alemán, Yoan; Vinken, Lore; Kourí, Vivian; Pérez, Lissette; Álvarez, Alina; Abrahantes, Yeissel; Fonseca, Carlos; Pérez, Jorge; Correa, Consuelo; Soto, Yudira; Schrooten, Yoeri; Vandamme, Anne-Mieke; Van Laethem, Kristel

    2015-01-01

    As commercial human immunodeficiency virus type 1 drug resistance assays are expensive, they are not commonly used in resource-limited settings. Hence, a more affordable in-house procedure was set up taking into account the specific epidemiological and economic circumstances of Cuba. The performance characteristics of the in-house assay were evaluated using clinical samples with various subtypes and resistance patterns. The lower limit of amplification was determined on dilutions series of 20 clinical isolates and ranged from 84 to 529 RNA copies/mL. For the assessment of trueness, 14 clinical samples were analyzed and the ViroSeq HIV-1 Genotyping System v2.0 was used as the reference standard. The mean nucleotide sequence identity between the two assays was 98.7% ± 1.0. Additionally, 99.0% of the amino acids at drug resistance positions were identical. The sensitivity and specificity in detecting drug resistance mutations was respectively 94.1% and 99.5%. Only few discordances in drug resistance interpretation patterns were observed. The repeatability and reproducibility were evaluated using 10 clinical samples with 3 replicates per sample. The in-house test was very precise as nucleotide sequence identity among paired nucleotide sequences ranged from 98.7% to 99.9%. The acceptance criteria were met by the in-house test for all performance characteristics, demonstrating a high degree of accuracy. Subsequently, the applicability in routine clinical practice was evaluated on 380 plasma samples. The amplification success rate was 91% and good quality consensus sequences encoding the entire protease and the first 335 codons in reverse transcriptase could be obtained for 99% of the successful amplicons. The reagent cost per sample using the in-house procedure was around € 80 per genotyping attempt. Overall, the in-house assay provided good results, was feasible with equipment and reagents available in Cuba and was half as expensive as commercial assays.

  19. Single-shell tank riser resistance to ground test plan

    International Nuclear Information System (INIS)

    Kiewert, L.R.

    1996-01-01

    This Test Procedure provides the general directions for conducting Single-Shell Tank Riser to Earth Measurements which will be used by engineering as a step towards providing closure for the Lightning Hazard Issue

  20. Enhanced corrosion resistance and biocompatibility of β-type Ti–25Nb–25Zr alloy by electrochemical anodization

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Her-Hsiung [Department of Dentistry, National Yang-Ming University, Taipei, 112 Taiwan (China); Graduate Institute of Basic Medical Science, China Medical University, Taichung, 404 Taiwan (China); Department of Biomedical Informatics, Asia University, Taichung, 413 Taiwan (China); Department of Stomatology, Taipei Veterans General Hospital, Taipei, 112 Taiwan (China); Wu, Chia-Ping; Sun, Ying-Sui; Huang, Hsun-Miao [Institute of Oral Biology, National Yang-Ming University, Taipei, 112 Taiwan (China); Lee, Tzu-Hsin, E-mail: biomaterials@hotmail.com [School of Dentistry, Chung Shan Medical University, Taichung, 402 Taiwan (China); Oral Medicine Center, Chung Shan Medical University Hospital, Taichung, 402 Taiwan (China)

    2013-12-31

    The biocompatibility of implants is largely determined by their surface characteristics. This study presents a novel method for performing electrochemical anodization on β-type Ti–25Nb–25Zr alloy with a low elastic modulus (approximately 70 GPa). This method results in a thin hybrid layer capable of enhancing the surface characteristics of the implants. We investigated the surface topography and microstructure of the resulting Ti–25Nb–25Zr alloy. The corrosion resistance was evaluated using potentiodynamic polarization curve measurements in simulated body fluid. The cytotoxicity was evaluated according to International Organization for Standardization 10993–5 specification. Cell adhesion of human bone marrow mesenchymal stem cells on the test specimens was observed using scanning electron microscopy and fluorescence microscopy. The anodization produced a thin (approximately 40 nm-thick) hybrid oxide layer with a nanoporous outer sublayer (pore size < 15 nm) and a dense inner layer. The thin hybrid oxide layer increased the corrosion resistance of the Ti–25Nb–25Zr alloy by increasing the corrosion potential and decreasing both the corrosion rate and passive current. Ti–25Nb–25Zr alloys with and without anodization treatment were non-toxic. Surface nanotopography on the anodized Ti–25Nb–25Zr alloy enhanced protein adsorption and cell adhesion. Our results demonstrate that electrochemical anodization increases the corrosion resistance and cell adhesion of β-type Ti–25Nb–25Zr alloy while providing a lower elastic modulus suitable for implant applications. - Highlights: • An electrochemical anodization was applied to β-type Ti–25Nb–25Zr alloy surface. • Anodized surface had nanoscale hybrid oxide layer. • Anodized surface increased corrosion resistance due to dense inner sublayer. • Anodized surface enhanced cell adhesion due to nanoporous outer sublayer. • Electrochemical anodization has potential as implant surface treatment.

  1. Enhanced corrosion resistance and biocompatibility of β-type Ti–25Nb–25Zr alloy by electrochemical anodization

    International Nuclear Information System (INIS)

    Huang, Her-Hsiung; Wu, Chia-Ping; Sun, Ying-Sui; Huang, Hsun-Miao; Lee, Tzu-Hsin

    2013-01-01

    The biocompatibility of implants is largely determined by their surface characteristics. This study presents a novel method for performing electrochemical anodization on β-type Ti–25Nb–25Zr alloy with a low elastic modulus (approximately 70 GPa). This method results in a thin hybrid layer capable of enhancing the surface characteristics of the implants. We investigated the surface topography and microstructure of the resulting Ti–25Nb–25Zr alloy. The corrosion resistance was evaluated using potentiodynamic polarization curve measurements in simulated body fluid. The cytotoxicity was evaluated according to International Organization for Standardization 10993–5 specification. Cell adhesion of human bone marrow mesenchymal stem cells on the test specimens was observed using scanning electron microscopy and fluorescence microscopy. The anodization produced a thin (approximately 40 nm-thick) hybrid oxide layer with a nanoporous outer sublayer (pore size < 15 nm) and a dense inner layer. The thin hybrid oxide layer increased the corrosion resistance of the Ti–25Nb–25Zr alloy by increasing the corrosion potential and decreasing both the corrosion rate and passive current. Ti–25Nb–25Zr alloys with and without anodization treatment were non-toxic. Surface nanotopography on the anodized Ti–25Nb–25Zr alloy enhanced protein adsorption and cell adhesion. Our results demonstrate that electrochemical anodization increases the corrosion resistance and cell adhesion of β-type Ti–25Nb–25Zr alloy while providing a lower elastic modulus suitable for implant applications. - Highlights: • An electrochemical anodization was applied to β-type Ti–25Nb–25Zr alloy surface. • Anodized surface had nanoscale hybrid oxide layer. • Anodized surface increased corrosion resistance due to dense inner sublayer. • Anodized surface enhanced cell adhesion due to nanoporous outer sublayer. • Electrochemical anodization has potential as implant surface treatment

  2. Tests for determining impact resistance and strength of glass used for nuclear waste disposal

    International Nuclear Information System (INIS)

    Bunnell, L.R.

    1979-05-01

    Tests are described for determining the impact resistance (Section A) and static tensile strength (Section B) of glasses containing simulated or actual nuclear wastes. This report describes the development and use of these tests to rank different glasses, to assess effects of devitrification, and to examine the effect of impact energy on resulting surface area. For clarity this report is divided into two sections, Impact Resistance and Tensile Strength

  3. EARLY TESTS OF DRUM TYPE PACKAGINGS - THE LEWALLEN REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Smith, A.

    2010-07-29

    The need for robust packagings for radioactive materials (RAM) was recognized from the earliest days of the nuclear industry. The U.S. Department of Energy (DOE) Rocky Flats Plant developed a packaging for shipment of Pu in the early 1960's, which became the U.S. Department of Transportation (DOT) 6M specification package. The design concepts were employed in other early packagings. Extensive tests of these at Savannah River Laboratory (now Savannah River National Laboratory) were performed in 1969 and 1970. The results of these tests were reported in 'Drum and Board-Type Insulation Overpacks of Shipping Packages for Radioactive Materials', by E. E. Lewallen. The Lewallen Report was foundational to design of subsequent drum type RAM packaging. This paper summarizes this important early study of drum type packagings. The Lewallen Report demonstrated the ability packagings employing drum and insulation board overpacks and engineered containment vessels to meet the Type B package requirements. Because of the results of the Lewallen Report, package designers showed high concern for thermal protection of 'Celotex'. Subsequent packages addressed this by following strategies like those recommended by Lewallen and by internal metal shields and supplemental, encapsulated insulation disks, as in 9975. The guidance provide by the Lewallen Report was employed in design of a large number of drum size packagings over the following three decades. With the increased public concern over transportation of radioactive materials and recognition of the need for larger margins of safety, more sophisticated and complex packages have been developed and have replaced the simple packagings developed under the Lewallen Report paradigm.

  4. The ABC-Type Multidrug Resistance Transporter LmrCD Is Responsible for an Extrusion-Based Mechanism of Bile Acid Resistance in Lactococcus lactis

    NARCIS (Netherlands)

    Zaidi, Arsalan Haseeb; Bakkes, Patrick J.; Lubelski, Jacek; Agustiandari, Herfita; Kuipers, Oscar P.; Driessen, Arnold J. M.

    2008-01-01

    Upon prolonged exposure to cholate and other toxic compounds, Lactococcus lactis develops a multidrug resistance phenotype that has been attributed to an elevated expression of the heterodimeric ABC-type multidrug transporter LmrCD. To investigate the molecular basis of bile acid resistance in L.

  5. Construction and testing of a 'fork' type central rod

    International Nuclear Information System (INIS)

    Guicherd, R.; Meunier, C.

    1964-01-01

    Aim of the control rod: - Reduction of the flux peaks - Increase of the efficiency - simplification of the mechanics - without modification of the grid nor of the standard fuel plates. Results of the tests: - Reduction of the flux peaks by 29 per cent - Increase of the efficiency by 20 per cent - The suppleness of the plates and the decrease in the number of parts results in greater safety during operation. Conclusions: Study of a generalized adaptation of this type of rod which presents definite advantages. (authors) [fr

  6. Empagliflozin decreases remnant-like particle cholesterol in type 2 diabetes patients with insulin resistance.

    Science.gov (United States)

    Hattori, Sachiko

    2017-11-28

    Remnant lipoproteins are thought to be atherogenic. Remnant-like particle cholesterol (RLP-C), which reflects the levels of various kinds of remnant lipoproteins in the blood, has a significant correlation with insulin resistance. In the present study, we measured the effect of empagliflozin (EMPA) on the levels of RLP-C, and investigated whether EMPA-mediated change in RLP-C is associated with a change in insulin resistance in type 2 diabetes patients who have insulin resistance. Patients were allocated to receive a placebo (n = 51) or EMPA (n = 58) as an add-on treatment. Fasting blood samples were collected before and 12 weeks after this intervention. EMPA significantly decreased glycated hemoglobin, bodyweight, systolic blood pressure, plasma triglycerides, liver transaminases and estimated glomerular filtration rate, and increased high-density lipoprotein cholesterol. Furthermore, EMPA decreased RLP-C and homeostatic model assessment of insulin resistance. In the placebo group, there were no significant changes in these factors except for slight increases in liver transaminases. Multiple regression analysis showed that the change in homeostatic model assessment of insulin resistance (P = 0.0102) and the change in alanine aminotransferase (P = 0.0301) were significantly associated with the change in RLP-C in the EMPA group. The change in RLP-C significantly correlated with the change in homeostatic model assessment of insulin resistance (Pearson correlation coefficient 0.503, 95% confidence interval 0.199-0.719; P = 0.00241). EMPA decreases RLP-C levels, which is closely associated with amelioration of insulin sensitivity in diabetes patients who have insulin resistance. © 2017 The Authors. Journal of Diabetes Investigation published by Asian Association for the Study of Diabetes (AASD) and John Wiley & Sons Australia, Ltd.

  7. The relationship between vitronectin and hepatic insulin resistance in type 2 diabetes mellitus.

    Science.gov (United States)

    Cao, Yan; Li, Xinyu; Lu, Chong; Zhan, Xiaorong

    2018-05-18

    The World Health Organization (WHO) estimates that approximately 300 million people will suffer from diabetes mellitus by 2025. Type 2 diabetes mellitus (T2DM) is much more prevalent. T2DM comprises approximately 90% of diabetes mellitus cases, and it is caused by a combination of insulin resistance and inadequate compensatory insulin secretory response. In this study, we aimed to compare the plasma vitronectin (VN) levels between patients with T2DM and insulin resistance (IR) and healthy controls. Seventy patients with IR and 70 age- and body mass index (BMI)-matched healthy controls were included in the study. The insulin, Waist-to-Hip Ratio (WHR), C-peptide (CP) and VN levels of all participants were examined. The homeostasis model of assessment for insulin resistence index (HOMA-IR (CP)) formula was used to calculate insulin resistance. The levels of BMI, fasting plasma gluose (FPG), 2-hour postprandial glucose (2hPG), glycated hemoglobins (HbA1c), and HOMA-IR (CP) were significantly elevated in case group compared with controls. VN was found to be significantly decreased in case group. (VN Mean (Std): 8.55 (2.92) versus 12.88 (1.26) ng/mL p insulin resistance in patients with T2DM.

  8. Association of a microsatellite in FASL to type II diabetes and of the FAS-670G>A genotype to insulin resistance

    DEFF Research Database (Denmark)

    Nolsøe, R L; Hamid, Y H; Pociot, F

    2006-01-01

    -cells, Fas expression and concomitant apoptosis owing to a constitutive expression of FasL. FASL and FAS map to loci linked to type II diabetes and estimates of insulin resistance, respectively. We have tested two functional promoter polymorphisms, FAS-670 G>A and FASL-844C>T as well as a microsatellite...... association to type II diabetes for the allele distribution of the FASL microsatellite (P-value 0.02, Bonferroni corrected). The FAS-670G>A was associated with homeostasis model assessment insulin resistance index and body mass index (P-values 0.02 and 0.02). We conclude that polymorphisms of FASL and FAS...

  9. Verification test of advanced LWR fuel components of Westinghouse type nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Lee, Young Ho

    2004-08-01

    The purpose of this project is to independently conduct the performance test of the spacer grids and the cladding material of the 16x16 and 17x17 advanced fuels for Westinghouse type plants, and to improve the relevant test technology. Major works and results of the present research are as follows. 1. The design and structural features of the spacer grids were investigated, especially the finally determined I-spring was thoroughly analyzed in the point of the mechanical damage and characteristic. 2. As for the mechanical tests of the space grids, the characterization, the impact and the fretting wear tests were carried out. The block as well as the in-grid tests were conducted for the spring/dimple characterization, from which a simple method was developed that simulated the boundary conditions of the assembled grid straps. The impact tester was modified and improved to accommodate a full size grid assembly. The impact result showed that the grid assembly fulfilled the design criteria. As for the fretting wear tests, a sliding test under the room temperature air/water, a sliding/impact test under the room temperature air and a sliding/impact tests under the high temperature and pressure environments were carried out. To this end, a high temperature and pressure fretting wear tester was newly developed. The wear characteristic and the resistibility of the advanced grid spring/dimple were analyzed in detail. The test results were verified through comparing those with the test results by the Westinghouse company. 3. The properties and performance of the newly adopted material for the cladding, Low Sn Zirlo was investigated by a room and high temperature tensile tests and a corrosion tests under the environments of 360 .deg. C water, 400 steam and 360 .deg. C 70ppm LiOH. Through the present project, all the test equipment and technologies for the fuel components were procured, which will be used for future domestic development of a new fuel

  10. Germination test as a fast method to detect glyphosate-resistant sourgrass

    Directory of Open Access Journals (Sweden)

    Marcos Altomani Neves Dias

    2015-01-01

    Full Text Available The occurrence of weed species with different levels of resistance to glyphosate has increasingly spread in agricultural areas. In Brazil, sourgrass is among the main species presenting issues in this regard. Thus, fast and reliable methods to detect glyphosate resistance are of special interest for this specie, either for research or rational management purposes. This study was carried out to verify the feasibility of using the germination test to detect glyphosate resistance in sourgrass. The experiment was conducted with two sourgrass biotypes, with different levels of susceptibility to glyphosate. The seeds were previously imbibed in solutions composed of 0, 0.1875%, 0.25%, 0.75%, 1.5%, 3% and 6% of glyphosate during two periods, five and ten minutes, and submitted to germination tests. The results indicate the germination test as a feasible and time-saving approach to evaluate glyphosate-resistant sourgrass, with results available in seven days.

  11. Germination test as a fast method to detect glyphosate-resistant sourgrass

    Directory of Open Access Journals (Sweden)

    Marcos Altomani Neves Dias

    2015-09-01

    Full Text Available The occurrence of weed species with different levels of resistance to glyphosate has increasingly spread in agricultural areas. In Brazil, sourgrass is among the main species presenting issues in this regard. Thus, fast and reliable methods to detect glyphosate resistance are of special interest for this specie, either for research or rational management purposes. This study was carried out to verify the feasibility of using the germination test to detect glyphosate resistance in sourgrass. The experiment was conducted with two sourgrass biotypes, with different levels of susceptibility to glyphosate. The seeds were previously imbibed in solutions composed of 0, 0.1875%, 0.25%, 0.75%, 1.5%, 3% and 6% of glyphosate during two periods, five and ten minutes, and submitted to germination tests. The results indicate the germination test as a feasible and time-saving approach to evaluate glyphosate-resistant sourgrass, with results available in seven days.

  12. Rapid Aminoglycoside NP Test for Rapid Detection of Multiple Aminoglycoside Resistance in Enterobacteriaceae.

    Science.gov (United States)

    Nordmann, Patrice; Jayol, Aurélie; Dobias, Jan; Poirel, Laurent

    2017-04-01

    The rapid aminoglycoside NP (Nordmann/Poirel) test was developed to rapidly identify multiple aminoglycoside (AG) resistance in Enterobacteriaceae It is based on the detection of the glucose metabolism related to enterobacterial growth in the presence of a defined concentration of amikacin plus gentamicin. Formation of acid metabolites was evidenced by a color change (orange to yellow) of the red phenol pH indicator. The rapid aminoglycoside NP test was evaluated by using bacterial colonies of 18 AG-resistant isolates producing 16S rRNA methylases, 20 AG-resistant isolates expressing AG-modifying enzymes (acetyl-, adenyl-, and phosphotransferases), and 10 isolates susceptible to AG. Its sensitivity and specificity were 100% and 97%, respectively, compared to the broth dilution method, which was taken as the gold standard for determining aminoglycoside resistance. The test is inexpensive, rapid (<2 h), and implementable worldwide. Copyright © 2017 American Society for Microbiology.

  13. GLUT4 is reduced in slow muscle fibers of type 2 diabetic patients: is insulin resistance in type 2 diabetes a slow, type 1 fiber disease?

    DEFF Research Database (Denmark)

    Gaster, M; Staehr, P; Beck-Nielsen, H

    2001-01-01

    To gain further insight into the mechanisms underlying muscle insulin resistance, the influence of obesity and type 2 diabetes on GLUT4 immunoreactivity in slow and fast skeletal muscle fibers was studied. Through a newly developed, very sensitive method using immunohistochemistry combined...... with morphometry, GLUT4 density was found to be significantly higher in slow compared with fast fibers in biopsy specimens from lean and obese subjects. In contrast, in type 2 diabetic subjects, GLUT4 density was significantly lower in slow compared with fast fibers. GLUT4 density in slow fibers from diabetic...... was reduced to 77% in the obese subjects and to 61% in type 2 diabetic patients compared with the control subjects. We propose that a reduction in the fraction of slow-twitch fibers, combined with a reduction in GLUT4 expression in slow fibers, may reduce the insulin-sensitive GLUT4 pool in type 2 diabetes...

  14. Direct Repeat Unit (dru) Typing of Methicillin-Resistant Staphylococcus pseudintermedius from Dogs and Cats.

    Science.gov (United States)

    Kadlec, Kristina; Schwarz, Stefan; Goering, Richard V; Weese, J Scott

    2015-12-01

    Methicillin-resistant Staphylococcus pseudintermedius (MRSP) has emerged in a remarkable manner as an important problem in dogs and cats. However, limited molecular epidemiological information is available. The aims of this study were to apply direct repeat unit (dru) typing in a large collection of well-characterized MRSP isolates and to use dru typing to analyze a collection of previously uncharacterized MRSP isolates. Two collections of MRSP isolates from dogs and cats were included in this study. The first collection comprised 115 well-characterized MRSP isolates from North America and Europe. The data for these isolates included multilocus sequence typing (MLST) and staphylococcal protein A gene (spa) typing results as well as SmaI macrorestriction patterns after pulsed-field gel electrophoresis (PFGE). The second collection was a convenience sample of 360 isolates from North America. The dru region was amplified by PCR, sequenced, and analyzed. For the first collection, the discriminatory indices of the typing methods were calculated. All isolates were successfully dru typed. The discriminatory power for dru typing (D = 0.423) was comparable to that of spa typing (D = 0.445) and of MLST (D = 0.417) in the first collection. Occasionally, dru typing was able to further discriminate between isolates that shared the same spa type. Among all 475 isolates, 26 different dru types were identified, with 2 predominant types (dt9a and dt11a) among 349 (73.4%) isolates. The results of this study underline that dru typing is a useful tool for MRSP typing, being an objective, standardized, sequence-based method that is relatively cost-efficient and easy to perform. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  15. Fire Resistance Testing of Bulkhead and Deck Penetrations. Phase 2

    Science.gov (United States)

    1988-12-01

    UL TEST NO. 32 O STEEL PLATE, 36X36X 3/16- THICK ASTMA -53, GRADE A OR B (OR EQUIVALENT).® STEEL PLATE COLLAR IO DIA. X 3116 THICK ASTMA -53 GRADE A ORB...36x36*x3/16* THICK ASTMA -53, GRADE A OR B (OR EQUIVALENT). (>STEEL PAD 10-112𔃺 OD. x 8" I.D. x 314’ THICK. \\,) ASTMA -53, GRADE A OR B. ®BRONZE FLANGE

  16. ESBL Detection: Comparison of a Commercially Available Chromogenic Test for Third Generation Cephalosporine Resistance and Automated Susceptibility Testing in Enterobactericeae.

    Directory of Open Access Journals (Sweden)

    Mohamed Ramadan El-Jade

    Full Text Available Rapid detection and reporting of third generation cephalosporine resistance (3GC-R and of extended spectrum betalactamases in Enterobacteriaceae (ESBL-E is a diagnostic and therapeutic priority to avoid inefficacy of the initial antibiotic regimen. In this study we evaluated a commercially available chromogenic screen for 3GC-R as a predictive and/or confirmatory test for ESBL and AmpC activity in clinical and veterinary Enterobacteriaceae isolates. The test was highly reliable in the prediction of cefotaxime and cefpodoxime resistance, but there was no correlation with ceftazidime and piperacillin/tazobactam minimal inhibitory concentrations. All human and porcine ESBL-E tested were detected with exception of one genetically positive but phenotypically negative isolate. By contrast, AmpC detection rates lay below 30%. Notably, exclusion of piperacillin/tazobactam resistant, 3GC susceptible K1+ Klebsiella isolates increased the sensitivity and specificity of the test for ESBL detection. Our data further imply that in regions with low prevalence of AmpC and K1 positive E. coli strains chromogenic testing for 3GC-R can substitute for more time consuming ESBL confirmative testing in E. coli isolates tested positive by Phoenix or VITEK2 ESBL screen. We, therefore, suggest a diagnostic algorithm that distinguishes 3GC-R screening from primary culture and species-dependent confirmatory ESBL testing by βLACTATM and discuss the implications of MIC distribution results on the choice of antibiotic regimen.

  17. Test results on the dynamic testing of expansion type concrete anchors

    International Nuclear Information System (INIS)

    Barron, B.; Rice, R.; Stephen, R.M.

    1974-12-01

    Tests were performed to determine the structural response of commercially available expansion type anchors for the FFTF when subjected to dynamic loadings similar to machine vibrations and earthquakes. The specimens were subjected to tension, shear, and combined shear-tension loads

  18. Radiation Effects of n-type, Low Resistivity, Spiral Silicon Drift Detector Hybrid Systems

    International Nuclear Information System (INIS)

    Chen, W.; De Geronimo, G.; Carini, G.A.; Gaskin, J.A.; Keister, J.W.; Li, S.; Li, Z.; Ramsey, B.D.; Siddons, D.P.; Smith, G.C.; Verbitskaya, E.

    2011-01-01

    We have developed a new thin-window, n-type, low-resistivity, spiral silicon drift detector (SDD) array - to be used as an extraterrestrial X-ray spectrometer (in varying environments) for NASA. To achieve low-energy response, a thin SDD entrance window was produced using a previously developed method. These thin-window devices were also produced on lower resistivity, thinner, n-type, silicon material, effectively ensuring their radiation hardness in anticipation of operation in potentially harsh radiation environments (such as found around the Jupiter system). Using the Indiana University Cyclotron Facility beam line RERS1, we irradiated a set of suitable diodes up to 5 Mrad and the latest iteration of our ASICs up to 12 Mrad. Then we irradiated two hybrid detectors consisting of newly, such-produced in-house (BNL) SDD chips bonded with ASICs with doses of 0.25 Mrad and 1 Mrad. Also we irradiated another hybrid detector consisting of previously produced (by KETEK) on n-type, high-resistivity SDD chip bonded with BNL's ASICs with a dose of 1 Mrad. The measurement results of radiated diodes (up to 5 Mrad), ASICs (up to 12 Mrad) and hybrid detectors (up to 1 Mrad) are presented here.

  19. Association of Oxidative Stress and Obesity with Insulin Resistance in Type 2 Diabetes Mellitus.

    Science.gov (United States)

    Das, P; Biswas, S; Mukherjee, S; Bandyopadhyay, S K

    2016-01-01

    Oxidative stress occurs due to delicate imbalance between pro-oxidant and anti oxidant forces in our system. It has been found to be associated with many morbidities but its association with obesity and insulin resistance is still controversial. Here in our study we examined 167 patients of recent onset type 2 diabetes mellitus and 60 age sex matched non-diabetic control. Body Mass Index (BMI), abdominal circumference, fasting blood glucose, serum insulin and plasma Malondealdehyde (MDA, marker for oxidative stress) were measured in them. On the basis of BMI, subjects were divided into obese (BMI≥25) and non obese (BMIobese and non-obese sub groups. Insulin resistance score showed positive correlation with BMI, abdominal circumference, and plasma MDA, strength of association being highest with abdominal circumference. Plasma MDA was found to have positive correlation with physical parameters. Study concludes that, obesity mainly central type may predispose to insulin resistance and oxidative stress may be a crucial factor in its pathogenesis. Thus, oxidative stress may be the connecting link between obesity and type 2 diabetes mellitus, two on going global epidemics.

  20. Phage types and antimicrobial resistance among Danish bovine Staphylococcus aureus isolates since the 1950s

    DEFF Research Database (Denmark)

    Vintov, Jan; Aarestrup, Frank Møller; Zinn, C. E.

    2003-01-01

    three time periods, representing 43.3% of the typeable isolates. This indicates that the Danish S. aureus population related to bovine mastitis has remained relatively unchanged over the last 50 years. The occurrence of antimicrobial resistance has remained low in Denmark in comparison to other......A total of 292 bovine Staphylococcus aureus isolates obtained from the 1950s (86 isolates), 1992 (107 isolates), and 2000 (99 isolates) were examined for antimicrobial susceptibility and phage typing. The same types of S. aureus (80, 52, 3A, 3A/3C, 42E, 77) were found among the isolates from all...

  1. Improving the proliferation resistance of research and test reactors

    International Nuclear Information System (INIS)

    Lewis, R.A.

    1978-01-01

    Elimination, or substantial reduction, of the trade in unirradiated highly-enriched fuel elements for research and test reactors would significantly reduce the proliferation risk associated with the current potential for diversion of these materials. To this end, it is the long-term goal of U.S. policy to fuel all new and existing research and test reactors with uranium of less-than-20% enrichment (but substantially greater than natural) excepting, perhaps, only a small number of high-power, high-performance, reactors. The U.S. development program for enrichment reduction in research and test reactor designs currently using 90-93% enriched uranium is based on the practical criterion that enrichment reduction should not cause significant flux performance (flux per unit power) or burnup performance degradation relative to the unmodified reactor design. To first order, this implies the requirement that the 235 U loading in the reduced-enrichment fuel elements be the same as the 235 U loading in the 90-93% enriched fuel elements. This can be accomplished by substitution of higher uranium density fuel technology for currently-used fuel technology in the fuel meat volume of the current fuel element design and/or by increasing the usable fuel meat volume. For research and test reactors of power greater than 5-10 megawatts, fuel technology does not currently exist that would permit enrichment reductions to below 20% utilizing this criterion. A program is now beginning in the U.S. to develop the necessary fuel technology. Currently-proven fuel technology is capable, however, of accommodating enrichment reductions to the 30-45% range (from 90-93%) for many reactors in the 5-50MW range. Accordingly the U.S. is proposing to convert existing reactors (and new designs) in the 5-50MW range from the use of highly-enriched fuel to the use of 30-45% enriched fuel, and reactors of less that about 5MW to less-than-20% enrichment, wherever this can be done without significant

  2. Resistance exercise versus aerobic exercise for type 2 diabetes: a systematic review and meta-analysis.

    Science.gov (United States)

    Yang, Zuyao; Scott, Catherine A; Mao, Chen; Tang, Jinling; Farmer, Andrew J

    2014-04-01

    Resistance and aerobic exercises are both recommended as effective treatments for people with type 2 diabetes. However, the optimum type of exercise for the disease remains to be determined to inform clinical decision-making and facilitate personalized exercise prescription. Our objective was to investigate whether resistance exercise is comparable to aerobic exercise in terms of effectiveness and safety in people with type 2 diabetes. PubMed, EMBASE, CENTRAL, CINAHL, and SPORTdiscus were systematically searched up to March 2013. The reference lists of eligible studies and relevant reviews were also checked. We used the following criteria to select studies for inclusion in the review: (i) the study was a randomized controlled trial; (ii) the participants were people with type 2 diabetes aged 18 years or more; (iii) the trial compared resistance exercise with aerobic exercise for a duration of at least 8 weeks, with pre-determined frequency, intensity, and duration; and (iv) the trial provided relevant data on at least one of the following: glycaemic control, blood lipids, anthropometric measures, blood pressure, fitness, health status, and adverse events. The assessment of study quality was based on the Cochrane Risk of Bias tool. For effectiveness measures, differences (resistance group minus aerobic group) in the changes from baseline with the two exercises were combined, using a random-effects model wherever possible. For adverse events, the relative risks (resistance group vs. aerobic group) were combined. Twelve trials (n = 626) were included. Following the exercise interventions, there was a greater reduction of glycosylated hemoglobin with aerobic exercise than with resistance exercise (difference 0.18% (1.97 mmol/mol), 95% confidence interval (CI) 0.01, 0.36). This difference became non-significant with sensitivity analysis (p = 0.14). The differences in changes from baseline were also statistically significant for body mass index (difference 0.22, 95% CI 0

  3. In vitro Resistance Testing of Porphyromonas gingivalis, Prevotella intermedia, and Tannerella forsythia to Triclosan.

    Science.gov (United States)

    Farsi, Deema; Tanner, Anne

    2016-04-01

    To determine the sensitivity of Porphyromonas gingivalis, Prevotella intermedia, and Tannerella forsythia to triclosan, and determine if these bacteria develop resistance to triclosan upon prolonged exposure. Susceptibility to triclosan was tested against three periodontal pathogens P. gingivalis, P. intermedia, and T. forsythia. Escherichia coli strains sensitive and resistant to triclosan were used as biological controls to confirm the efficacy of triclosan in the assays. Agar plates were prepared locally with vitamin K and hemin-supplemented medium. Porphyromonas gingivalis and P. intermedia did not grow on plates containing ≥ 2 μg/ml triclosan, while T. forsythia did not grow on ≥ 1.66 μg/ml. Colonies of P. intermedia resistant to triclosan developed after prolonged incubation at 2 μg/ml, but this resistance disappeared during subculture in the absence of triclosan. No significant resistance to triclosan was detected for these species. Dental products containing triclosan can be beneficial in controlling periodontal disease.

  4. Pedicle Screw Fixation Study in Immature Porcine Spines to Improve Pullout Resistance during Animal Testing.

    Directory of Open Access Journals (Sweden)

    Sophie Le Cann

    Full Text Available The porcine model is frequently used during development and validation of new spinal devices, because of its likeness to the human spine. These spinal devices are frequently composed of pedicle screws with a reputation for stable fixation but which can suffer pullouts during preclinical implantation on young animals, leading to high morbidity. With a view to identifying the best choices to optimize pedicle screw fixation in the porcine model, this study evaluates ex vivo the impact of weight (age of the animal, the level of the vertebrae (lumbar or thoracic and the type of screw anchorage (mono- or bi-cortical on pedicle screw pullouts. Among the 80 pig vertebrae (90- and 140-day-old tested in this study, the average screw pullout forces ranged between 419.9N and 1341.2N. In addition, statistical differences were found between test groups, pointing out the influence of the three parameters stated above. We found that the the more caudally the screws are positioned (lumbar level, the greater their pullout resistance is, moreover, screw stability increases with the age, and finally, the screws implanted with a mono-cortical anchorage sustained lower pullout forces than those implanted with a bi-cortical anchorage. We conclude that the best anchorage can be obtained with older animals, using a lumbar fixation and long screws traversing the vertebra and inducing bi-cortical anchorage. In very young animals, pedicle screw fixations need to be bi-cortical and more numerous to prevent pullout.

  5. Pedicle Screw Fixation Study in Immature Porcine Spines to Improve Pullout Resistance during Animal Testing.

    Science.gov (United States)

    Le Cann, Sophie; Cachon, Thibaut; Viguier, Eric; Miladi, Lotfi; Odent, Thierry; Rossi, Jean-Marie; Chabrand, Patrick

    2015-01-01

    The porcine model is frequently used during development and validation of new spinal devices, because of its likeness to the human spine. These spinal devices are frequently composed of pedicle screws with a reputation for stable fixation but which can suffer pullouts during preclinical implantation on young animals, leading to high morbidity. With a view to identifying the best choices to optimize pedicle screw fixation in the porcine model, this study evaluates ex vivo the impact of weight (age) of the animal, the level of the vertebrae (lumbar or thoracic) and the type of screw anchorage (mono- or bi-cortical) on pedicle screw pullouts. Among the 80 pig vertebrae (90- and 140-day-old) tested in this study, the average screw pullout forces ranged between 419.9N and 1341.2N. In addition, statistical differences were found between test groups, pointing out the influence of the three parameters stated above. We found that the the more caudally the screws are positioned (lumbar level), the greater their pullout resistance is, moreover, screw stability increases with the age, and finally, the screws implanted with a mono-cortical anchorage sustained lower pullout forces than those implanted with a bi-cortical anchorage. We conclude that the best anchorage can be obtained with older animals, using a lumbar fixation and long screws traversing the vertebra and inducing bi-cortical anchorage. In very young animals, pedicle screw fixations need to be bi-cortical and more numerous to prevent pullout.

  6. The application of the barrier-type anodic oxidation method to thickness testing of aluminum films

    Science.gov (United States)

    Chen, Jianwen; Yao, Manwen; Xiao, Ruihua; Yang, Pengfei; Hu, Baofu; Yao, Xi

    2014-09-01

    The thickness of the active metal oxide film formed from a barrier-type anodizing process is directly proportional to its formation voltage. The thickness of the consumed portion of the metal film is also corresponding to the formation voltage. This principle can be applied to the thickness test of the metal films. If the metal film is growing on a dielectric substrate, when the metal film is exhausted in an anodizing process, because of the high electrical resistance of the formed oxide film, a sudden increase of the recorded voltage during the anodizing process would occur. Then, the thickness of the metal film can be determined from this voltage. As an example, aluminum films are tested and discussed in this work. This method is quite simple and is easy to perform with high precision.

  7. Effect of adrenomedullin gene delivery on insulin resistance in type 2 diabetic rats

    Directory of Open Access Journals (Sweden)

    Hoda Y. Henein

    2011-01-01

    Full Text Available Type 2 diabetes mellitus is one of the common metabolic disorders that ultimately afflicts large number of individuals. Adrenomedullin (AM is a potent vasodilator peptide; previous studies reported development of insulin resistance in aged AM deficient mice. In this study, we employed a gene delivery approach to explore its potential role in insulin resistance. Four groups were included: control, diabetic, non-diabetic injected with the AM gene and diabetic injected with the AM gene. One week following gene delivery, serum glucose, insulin, triglycerides, leptin, adiponectin and corticosterone were measured as well as the insulin resistance index (HOMA-IR. Soleus muscle glucose uptake and RT-PCR of both AM and glucose transporter-4 (GLUT 4 gene expressions were assessed. A single tail vein injection of adrenomedullin gene in type 2 diabetic rats improved skeletal muscle insulin responsiveness with significant improvement of soleus muscle glucose uptake, HOMA-IR, serum glucose, insulin and triglycerides and significant increase in muscle GLUT 4 gene expression (P < 0.05 compared with the non-injected diabetic rats. The beneficial effects of AM gene delivery were accompanied by a significant increase in the serum level of adiponectin (2.95 ± 0.09 versus 2.33 ± 0.17 μg/ml in the non-injected diabetic group as well as a significant decrease in leptin and corticosterone levels (7.51 ± 0.51 and 262.88 ± 10.34 versus 10.63 ± 1.4 and 275.86 ± 11.19 ng/ml respectively in the non-injected diabetic group. The conclusion of the study is that AM gene delivery can improve insulin resistance and may have significant therapeutic applications in type 2 diabetes mellitus.

  8. Methicillin-Resistant Staphylococcus aureus from Brazilian Dairy Farms and Identification of Novel Sequence Types.

    Science.gov (United States)

    Oliveira, C J B; Tiao, N; de Sousa, F G C; de Moura, J F P; Santos Filho, L; Gebreyes, W A

    2016-03-01

    The aim of this study was to investigate the phenotypic and genotypic diversity and anti-microbial resistance among staphylococci of dairy herds that originated from Paraiba State, north-eastern Brazil, a region where such studies are rare. Milk samples (n = 552) were collected from 15 dairy farms. Isolates were evaluated for anti-microbial susceptibility by Kirby-Bauer disc diffusion method. Confirmation of methicillin-resistant Staphylococcus aureus (MRSA) was performed using multiplex PCR targeting mecA and nuc genes in addition to phenotypic assay based on PBP-2a latex agglutination. Clonal relatedness of isolates was determined by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST) genotyping. Staphylococci were detected in 269 (49%) of the samples. Among these, 65 (24%) were S. aureus. The remaining 204 isolates were either coagulase-negative staphylococci (n = 188; 70%) or coagulase positive other than S. aureus (n = 16; 6%). Staphylococci were cultured in seven (35%) of the 20 hand swab samples, from which five isolates were S. aureus. The isolates were most commonly resistant against penicillin (43%), ampicillin (38%) and oxacillin (27%). The gene mecA was detected in 21 S. aureus from milk and in one isolate from a milker's hand. None of the isolates were resistant to vancomycin. PFGE findings showed high clonal diversity among the isolates. Based on MLST, we identified a total of 11 different sequence types (STs 1, 5, 6, 83, 97, 126, 1583, 1622, 1623, 1624 and 1625) with four novel STs (ST1622-ST1625). The findings show that MRSA is prevalent in milk from semi-extensive dairy cows in north-eastern Brazil, and further investigation on its extent in various types of milk production systems and the farm-to-table continuum is warranted. © 2015 Blackwell Verlag GmbH.

  9. Why testes are resistant to hydatidosis: Is blood-testis-barrier ...

    African Journals Online (AJOL)

    There was demonstrable hydatid cyst (protoscoleces and germinative layer) in testes of five rabbits from Group A, but in one rabbit, both testes were normal. In Group B, three out of four rabbits developed peritoneal hydatidosis. The mechanism of testicular resistance to echinococcosis could be due to blood-testis barrier ...

  10. Application of column tests and electrical resistivity methods for leachate transport monitoring

    Directory of Open Access Journals (Sweden)

    Wychowaniak Dorota

    2015-09-01

    Full Text Available Development of the human civilization leads to the pollution of environment. One of the contamination which are a real threat to soil and groundwater are leachates from landfills. In this paper the solute transport through soil was considered. For this purpose, the laboratory column tests of chlorides tracer and leachates transport on two soil samples have been carried out. Furthermore, the electrical resistivity method was applied as auxiliary tool to follow the movements of solute through the soil column what allowed to compare between the results obtained with column test method and electrical resistivity measurements. Breakthrough curves obtained by conductivity and resistivity methods represents similar trends which leads to the conclusion about the suitability of electrical resistivity methods for contamination transport monitoring in soil-water systems.

  11. Heat resistance study of basalt fiber material via mechanical tests

    Science.gov (United States)

    Gao, Y. Q.; Jia, C.; Meng, L.; Li, X. H.

    2017-12-01

    This paper focuses on the study of the relationship between the fracture strength of basalt rovings and temperature. Strong stretching performance of the rovings has been tested after the treatment at fixed temperatures but different heating time and then the fracture strength of the rovings exposed to the heating at different temperatures and cooled in different modes investigated. Finally, the fracture strength of the basalt material after the heat treatment was studied. The results showed that the room-temperature strength tends to decrease with an increase of the heat treatment time at 250 °C, but it has the local maximum after 2h heating. And the basalt rovings strength increased after the heat treatment up to 200 °C. It was 16.7 percent higher than the original strength. The strength depends not only on the temperature and duration of the heating, but also on the cooling mode. The value of the strength measured after cold water cooling was less by 6.3% compared with an ambient air cooling mode. The room-temperature breaking strength of the rovings heated at 200 °C and 100 °C for 2 hours each increased by about 14.6% with respect to unpretreated basalt rovings.

  12. Antibiotics Resistance in Rhizobium: Type, Process, Mechanism and Benefit for Agriculture.

    Science.gov (United States)

    Naamala, Judith; Jaiswal, Sanjay K; Dakora, Felix D

    2016-06-01

    The use of high-quality rhizobial inoculants on agricultural legumes has contributed substantially to the N economy of farming systems through inputs from biological nitrogen fixation (BNF). Large populations of symbiotically effective rhizobia should be available in the rhizosphere for symbiotic BNF with host plants. The rhizobial populations should also be able to compete and infect host plants. However, the rhizosphere comprises large populations of different microorganisms. Some of these microorganisms naturally produce antibiotics which are lethal to susceptible rhizobial populations in the soil. Therefore, intrinsic resistance to antibiotics is a desirable trait for the rhizobial population. It increases the rhizobia's chances of growth, multiplication and persistence in the soil. With a large population of rhizobia in the soil, infectivity of host plants and the subsequent BNF efficiency can be guaranteed. This review, therefore, puts together findings by various researchers on antibiotic resistance in bacteria with the main emphasis on rhizobia. It describes the different modes of action of different antibiotics, the types of antibiotic resistance exhibited by rhizobia, the mechanisms of acquisition of antibiotic resistance in rhizobia and the levels of tolerance of different rhizobial species to different antibiotics.

  13. Exploring the Benefits of Molecular Testing for Gonorrhoea Antibiotic Resistance Surveillance in Remote Settings.

    Directory of Open Access Journals (Sweden)

    Ben B Hui

    Full Text Available Surveillance for gonorrhoea antimicrobial resistance (AMR is compromised by a move away from culture-based testing in favour of more convenient nucleic acid amplification test (NAAT tests. We assessed the potential benefit of a molecular resistance test in terms of the timeliness of detection of gonorrhoea AMR.An individual-based mathematical model was developed to describe the transmission of gonorrhoea in a remote Indigenous population in Australia. We estimated the impact of the molecular test on the time delay between first importation and the first confirmation that the prevalence of gonorrhoea AMR (resistance proportion has breached the WHO-recommended 5% threshold (when a change in antibiotic should occur. In the remote setting evaluated in this study, the model predicts that when culture is the only available means of testing for AMR, the breach will only be detected when the actual prevalence of AMR in the population has already reached 8 - 18%, with an associated delay of ~43 - 69 months between first importation and detection. With the addition of a molecular resistance test, the number of samples for which AMR can be determined increases facilitating earlier detection at a lower resistance proportion. For the best case scenario, where AMR can be determined for all diagnostic samples, the alert would be triggered at least 8 months earlier than using culture alone and the resistance proportion will have only slightly exceeded the 5% notification threshold.Molecular tests have the potential to provide more timely warning of the emergence of gonorrhoea AMR. This in turn will facilitate earlier treatment switching and more targeted treatment, which has the potential to reduce the population impact of gonorrhoea AMR.

  14. Exploring the Benefits of Molecular Testing for Gonorrhoea Antibiotic Resistance Surveillance in Remote Settings.

    Science.gov (United States)

    Hui, Ben B; Ryder, Nathan; Su, Jiunn-Yih; Ward, James; Chen, Marcus Y; Donovan, Basil; Fairley, Christopher K; Guy, Rebecca J; Lahra, Monica M; Law, Mathew G; Whiley, David M; Regan, David G

    2015-01-01

    Surveillance for gonorrhoea antimicrobial resistance (AMR) is compromised by a move away from culture-based testing in favour of more convenient nucleic acid amplification test (NAAT) tests. We assessed the potential benefit of a molecular resistance test in terms of the timeliness of detection of gonorrhoea AMR. An individual-based mathematical model was developed to describe the transmission of gonorrhoea in a remote Indigenous population in Australia. We estimated the impact of the molecular test on the time delay between first importation and the first confirmation that the prevalence of gonorrhoea AMR (resistance proportion) has breached the WHO-recommended 5% threshold (when a change in antibiotic should occur). In the remote setting evaluated in this study, the model predicts that when culture is the only available means of testing for AMR, the breach will only be detected when the actual prevalence of AMR in the population has already reached 8 - 18%, with an associated delay of ~43 - 69 months between first importation and detection. With the addition of a molecular resistance test, the number of samples for which AMR can be determined increases facilitating earlier detection at a lower resistance proportion. For the best case scenario, where AMR can be determined for all diagnostic samples, the alert would be triggered at least 8 months earlier than using culture alone and the resistance proportion will have only slightly exceeded the 5% notification threshold. Molecular tests have the potential to provide more timely warning of the emergence of gonorrhoea AMR. This in turn will facilitate earlier treatment switching and more targeted treatment, which has the potential to reduce the population impact of gonorrhoea AMR.

  15. Clonal emergence of Klebsiella pneumoniae ST14 co-producing OXA-48-type and NDM carbapenemases with high rate of colistin resistance in Dubai, United Arab Emirates.

    Science.gov (United States)

    Moubareck, Carole Ayoub; Mouftah, Shaimaa F; Pál, Tibor; Ghazawi, Akela; Halat, Dalal H; Nabi, Anju; AlSharhan, Mouza A; AlDeesi, Zulfa O; Peters, Christabel C; Celiloglu, Handan; Sannegowda, Manjunath; Sarkis, Dolla K; Sonnevend, Ágnes

    2018-03-09

    Few studies have addressed the molecular epidemiology of carbapenem resistant Enterobacteriaceae (CRE) isolates in the Arabian Peninsula, and such investigations have been missing from Dubai, a major economical, tourism and medical centre of the region. The antibiotic susceptibility, the carbapenemase type produced, and the clonality of 89 CRE strains isolated in five major Dubai hospitals in June 2015 - June 2016 were determined. Thirty three percent of the collection of 70 K. pneumoniae, 13 E. coli and 6 other Enterobacteriaceae were extremely drug resistant, 27% were resistant to colistin, and 4.5% (four K. pneumoniae isolates) were resistant to all antibiotics tested. The colistin resistance rate in K. pneumoniae was 31.4%. None of the isolates carried mobile colistin resistance genes. Seventy-seven isolates produced carbapenemase: 53.3% OXA-48-like, 24.7% NDM, and 22.1% both OXA-48-like and NDM, respectively. PFGE clustered 50% of K. pneumoniae into a 35-membered group, which showed significant association with double carbapenemase production, with extreme drug resistance, and with being isolated from Emirati patients. Members of the cluster belonged to sequence type ST14. The rate of colistin resistance in K. pneumoniae ST14 was 37.1% vs. 27.1% of K. pneumoniae isolates outside of the cluster. Two of the panresistant K. pneumoniae isolates also belonged to ST14, whereas the other two were ST15 and ST231, respectively. In conclusion, beyond the overall high colistin resistance rate in CRE, the emergence of a highly resistant clone of K. pneumoniae ST14 in all Dubai hospitals investigated is a serious problem requiring immediate attention. Copyright © 2018. Published by Elsevier B.V.

  16. RESISTANCE TEST OF DEPOSITED ALUMINIUM LAYER ON PARABOLIC PARTS OF VEHICLE HEADLIGHT

    Directory of Open Access Journals (Sweden)

    Michal ADAMIK

    2014-10-01

    Full Text Available This paper documents a basic quality measurement in an automotive light industry. The experiment is based on a verification of reflective aluminium layer resistance against 100% humidity and higher temperature. This simulates the lifetime of a headlight on vehicle. The goal of this test is to prove that the reflective aluminium layer is able to resist to this environment without any changes in its structure. If any change occurs, the modification of production process will be needed.

  17. Changes of plasma angiogenic factors during chronic resistance exercise in type 1 diabetic rats

    International Nuclear Information System (INIS)

    Esfahani, S.P.; Gharakhanlou, R.

    2012-01-01

    Objective: Exercise has several beneficial effects on cardiovascular system. However, the exact mechanism is unclear. The purpose of this study was to evaluate the effects of chronic resistance exercise on some plasma angiogenic factors in type 1 diabetic rats. Methodology: Thirty male Wistar rats were divided into three groups of control, diabetic and diabetic trained (n = 10 each). Diabetes was induced by a single intraperitoneal injection of streptozotocin (55 mg/kg). The rats in the trained group undertook one training session per day, 3 days/week, for 4 weeks. Blood samples were taken and the concentrations of plasma glucose, lipid profile, nitric oxide (NO), vascular endothelial growth factor (VEGF) and soluble form of VEGF receptor-1 (sFlt-1) were determined. Results: We found a significant reduction in plasma NO concentrations in diabetic rats compared to the controls (p 0.05). There were no significant differences in plasma VEGF and sFlt-1 concentrations between diabetic sedentary and trained groups (p > 0.05). Moreover, VEGF/sFlt-1 ratios in diabetic animals were lower than the control group and resistance exercise could not increase this ratio in diabetic animals (p > 0.05) Conclusion: Resistance exercise could not change plasma VEGF, sFlt-1 and VEGF/sFlt-1 ratio. However, it increased plasma NO concentrations in diabetic animals. More studies are needed to determine the effects of this type of exercise on the angiogenesis process. (author)

  18. [Torque resistance of three different types of nickel-titanium rotary instruments].

    Science.gov (United States)

    Sun, Wei; Hou, Ben-xiang

    2010-10-01

    To compare torsional fracture of three different types of nickel-titanium rotary instruments ProTaper, Hero642 and Mtwo by making a stimulate models in vitro. Through the establishment of model in vitro, compared the different time with 3 kinds of nickel titanium file in cutting-edge bound occurs, and to observe the section of fractured instruments by scanning electron microscope. The resistence to torque was different from three types of nickel titanium instruments. The time to fracture of Mtwo was significantly longer than ProTaper's and Hero642's, but ProTaper's and Hero642's had no significant difference. Three kinds cross-sectional design were different, a lot of toughness nests were seen in broken surface. Most of them were ductile fracture. Time to fracture was influenced by the quality disfigurement. The resistance to torque of Mtwo was better than ProTaper and Hero642. The lifespan was influenced by the design of cross-section. The quality disfigurement of the files reduced the resistance to flexual fatigue.

  19. Biofilm formation in Haemophilus parasuis: relationship with antibiotic resistance, serotype and genetic typing.

    Science.gov (United States)

    Zhang, Jianmin; Xu, Chenggang; Shen, Haiyan; Li, Jingyi; Guo, Lili; Cao, Guojie; Feng, Saixiang; Liao, Ming

    2014-10-01

    Biofilms are surface-associated microbial communities, which are encased in self-synthesized extracellular environment. Biofilm formation may trigger drug resistance and inflammation, resulting in persistent infections. Haemophilus parasuis is the etiological agent of a systemic disease, Glässer's disease, characterized by fibrinous polyserositis, arthritis and meningitis in pigs. The purpose of this study was to examine the correlation between biofilm and antibiotic resistance among the clinical isolates of H. parasuis. In the present study, we tested biofilm-forming ability of 110 H. parasuis isolates from various farms using polystyrene microtiter plate assays. Seventy-three isolates of H. parasuis (66.4%) showed biofilm formation and most of them performed weak biofilm-forming ability (38/73). All isolates were tested for antimicrobial susceptibility to 18 antimicrobial agents by the broth microdilution method. H. parasuis isolates showed very high resistance (>90%) to sulfanilamide, nalidixic acid, and trimethoprim. Resistance to eight antibiotics such as penicillin (41.1% vs 8.1%), ampicillin (31.5% vs 8.1%), amoxicillin (28.8% vs 5.4%), gentamicin (46.6% vs 24.3%), cefazolin (19.2% vs 2.7%), doxycycline (19.2% vs 8.1%), cefotaxime (11% vs 2.7%), and cefaclor (13.7% vs 5.4%) was comparatively higher among biofilm producers than non-biofilm producers. Pulsed-field gel electrophoresis (PFGE) analyses could distinguish various isolates. Our data indicated that H. parasuis field isolates were able to form biofilms in vitro. In addition, biofilm positive strains had positive correlation with resistance to β-lactams antibiotics. Thus, biofilm formation may play important roles during H. parasuis infections. Copyright © 2014. Published by Elsevier Ltd.

  20. [Investigation of OXA type beta-lactamases and PFGE patterns in Acinetobacter baumannii strains resistant to carbapenems].

    Science.gov (United States)

    Keyik, Serafettin; Arslan, Uğur; Türk Dağı, Hatice; Seyhan, Tuba; Fındık, Duygu

    2014-10-01

    Acinetobacter baumannii is an important opportunistic and multidrug-resistant pathogen leading to nosocomial infections. Over the last 10 years, a significant and threatening increase in resistance to carbapenems, mainly due to the dissemination of class D beta-lactamases, has been reported in A.baumannii worldwide. The most common types of beta-lactamases causing carbapenem resistance in A.baumannii are the OXA-23, OXA-24, OXA-40, OXA-58 and OXA-143 type serine beta-lactamases. The aim of this study was to investigate the presence of OXA type beta-lactamases in carbapenem-resistant A.baumannii strains and the clonal relationship between the strains. A total of 105 non-duplicate carbapenem-resistant A.baumannii strains isolated from various clinical samples (68 blood, 18 bronchoalveolar lavage, 13 drainage, 3 urine, 2 cerebrospinal fluid and 1 catheter samples) in the Microbiology Laboratories of Selcuk University, Meram (2009-2012) and Selcuklu (2007-2008) Medical School Hospitals, were included in the study. The isolates were identified by conventional methods and Phoenix 100 BD (BD Diagnostic, USA) and Vitek II (bioMerieux, France) automated systems. Carbapenem susceptibility test was performed by Kirby-Bauer disk diffusion method according to the CLSI standards. bla(OXA 23-like), bla(OXA 24-like), bla(OXA 58-like) and bla(OXA 51-like) genes were amplified by multiplex PCR assay and clonal relatedness was investigated by pulsed-field gel electrophoresis (PFGE) using ApaI enzyme. The bla(OXA 51-like) gene was determined in all carbapenem-resistant A.baumannii isolates, while the bla(OXA 23-like) and bla(OXA 58-like) genes were detected in 46.6% and 53.3% of isolates, respectively. However bla(OXA 24-like) gene was not demonstrated in any isolates. bla(OXA 23-like) gene was determined in both Meram and Selcuklu Medical School hospitals, but bla(OXA 58-like) gene was detected only in Meram Medical School hospital. PFGE analysis of the isolates revealed 32 different

  1. A study of the pancreatic islet β-cell function and insulin resistance of type2 diabetic gastroparesis

    International Nuclear Information System (INIS)

    Zou Gang; Shao Hao; Lu Zeyuan; Ding Yuzhen; Chen Guanrong; Fu Juan

    2005-01-01

    Objective: To study the pancreatic islet β-cell function and insulin resistance of diabetic gastroparesis (DGP). Methods: 31 subjects with normal glucose tolerance (NGT), 32 subjects with impaired glucose tolerance (IGT), 38 subjects with type 2 diabetes mellitus (T2DM) and 31 subjects with DGP were en-rolled in the study, assessed by steamed bread meal tests, the plasma glucose and insulin at 0, 30, 60, 120 and 180 min were respectively measured by using glucose oxidase and radioimmunoassay, investigate the changes of area under insulin cure (INSAUC), Homa-insulin resistance (Homa-IR) index and modified β-cell function index (MBCI). Results: The INSAUC of IGT, T2DM, NGT and DGP fell in turn, there were signif-icantly differences among the groups. The Homa-IR index of NGT, IGT, DGP and T2DM rose in turn, there were significantly differences among the groupsexcept between T2DM and DGP. Conclusions: The pancreatic islet β-cell function of DGP was worse that NGT, IGT and T2DM, and the insulin resistance was stronger than NGT and IGT. (authors)

  2. Kaempferol alleviates insulin resistance via hepatic IKK/NF-κB signal in type 2 diabetic rats.

    Science.gov (United States)

    Luo, Cheng; Yang, Hui; Tang, Chengyong; Yao, Gaoqiong; Kong, Lingxi; He, Haixia; Zhou, Yuanda

    2015-09-01

    Recent studies show that inflammation underlies the metabolic disorders of insulin resistance and type 2 diabetes mellitus. Since kaempferol, a naturally occurring flavonoid, has been described to have potent anti-inflammatory properties, we investigated whether kaempferol could ameliorate insulin resistance through inhibiting inflammatory responses. The model of diabetic rat was induced by 6-week high-fat diet plus streptozotocin. Animals were orally treated with kaempferol (50 or 150 mg/kg) and aspirin (100mg/kg) for 10 weeks. The results showed that kaempferol ameliorated blood lipids and insulin in an dose-dependent manner. Kaempferol effectively restored insulin resistance induced alteration of glucose disposal by using an insulin tolerance test and the euglycemic-hyperinsulinemic clamp method. Western blotting results showed that KPF inhibited the phosphorylation of insulin receptor substrate-1 (IRS-1), IkB kinase α (IKKα) and IkB kinase β (IKKβ). These effects were accompanied with reduction in nucleic and cytosol levels of nuclear factor kappa-β (NF-κB), and further tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) levels. Aspirin had similar effects. These results provide in vivo evidence that kaempferol-mediated down-regulation of IKK and subsequent inhibition of NF-κB pathway activation may be associated with the reduction of hepatic inflammatory lesions, which is contributing to the improvement of insulin signaling defect in diabetes. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Assessing Psychological Insulin Resistance in Type 2 Diabetes: a Critical Comparison of Measures.

    Science.gov (United States)

    Holmes-Truscott, E; Pouwer, F; Speight, J

    2017-07-01

    This study aims to examine the operationalisation of 'psychological insulin resistance' (PIR) among people with type 2 diabetes and to identify and critique relevant measures. PIR has been operationalised as (1) the assessment of attitudes or beliefs about insulin therapy and (2) hypothetical or actual resistance, or unwillingness, to use to insulin. Five validated PIR questionnaires were identified. None was fully comprehensive of all aspects of PIR, and the rigour and reporting of questionnaire development and psychometric validation varied considerably between measures. Assessment of PIR should focus on the identification of negative and positive attitudes towards insulin use. Actual or hypothetical insulin refusal may be better conceptualised as a potential consequence of PIR, as its assessment overlooks the attitudes that may prevent insulin use. This paper provides guidance on the selection of questionnaires for clinical or research purpose and the development of new, or improvement of existing, questionnaires.

  4. Power flow analysis and optimal locations of resistive type superconducting fault current limiters.

    Science.gov (United States)

    Zhang, Xiuchang; Ruiz, Harold S; Geng, Jianzhao; Shen, Boyang; Fu, Lin; Zhang, Heng; Coombs, Tim A

    2016-01-01

    Based on conventional approaches for the integration of resistive-type superconducting fault current limiters (SFCLs) on electric distribution networks, SFCL models largely rely on the insertion of a step or exponential resistance that is determined by a predefined quenching time. In this paper, we expand the scope of the aforementioned models by considering the actual behaviour of an SFCL in terms of the temperature dynamic power-law dependence between the electrical field and the current density, characteristic of high temperature superconductors. Our results are compared to the step-resistance models for the sake of discussion and clarity of the conclusions. Both SFCL models were integrated into a power system model built based on the UK power standard, to study the impact of these protection strategies on the performance of the overall electricity network. As a representative renewable energy source, a 90 MVA wind farm was considered for the simulations. Three fault conditions were simulated, and the figures for the fault current reduction predicted by both fault current limiting models have been compared in terms of multiple current measuring points and allocation strategies. Consequently, we have shown that the incorporation of the E - J characteristics and thermal properties of the superconductor at the simulation level of electric power systems, is crucial for estimations of reliability and determining the optimal locations of resistive type SFCLs in distributed power networks. Our results may help decision making by distribution network operators regarding investment and promotion of SFCL technologies, as it is possible to determine the maximum number of SFCLs necessary to protect against different fault conditions at multiple locations.

  5. Zinc Resistance within Swine-Associated Methicillin-Resistant Staphylococcus aureus Isolates in the United States Is Associated with Multilocus Sequence Type Lineage.

    Science.gov (United States)

    Hau, Samantha J; Frana, Timothy; Sun, Jisun; Davies, Peter R; Nicholson, Tracy L

    2017-08-01

    Zinc resistance in livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA) sequence type 398 (ST398) is primarily mediated by the czrC gene colocated with the mecA gene, encoding methicillin resistance, within the type V staphylococcal cassette chromosome mec (SCC mec ) element. Because czrC and mecA are located within the same mobile genetic element, it has been suggested that the use of zinc in feed as an antidiarrheal agent has the potential to contribute to the emergence and spread of methicillin-resistant S. aureus (MRSA) in swine, through increased selection pressure to maintain the SCC mec element in isolates obtained from pigs. In this study, we report the prevalence of the czrC gene and phenotypic zinc resistance in U.S. swine-associated LA-MRSA ST5 isolates, MRSA ST5 isolates from humans with no swine contact, and U.S. swine-associated LA-MRSA ST398 isolates. We demonstrated that the prevalence of zinc resistance in U.S. swine-associated LA-MRSA ST5 isolates was significantly lower than the prevalence of zinc resistance in MRSA ST5 isolates from humans with no swine contact and swine-associated LA-MRSA ST398 isolates, as well as prevalences from previous reports describing zinc resistance in other LA-MRSA ST398 isolates. Collectively, our data suggest that selection pressure associated with zinc supplementation in feed is unlikely to have played a significant role in the emergence of LA-MRSA ST5 in the U.S. swine population. Additionally, our data indicate that zinc resistance is associated with the multilocus sequence type lineage, suggesting a potential link between the genetic lineage and the carriage of resistance determinants. IMPORTANCE Our data suggest that coselection thought to be associated with the use of zinc in feed as an antimicrobial agent is not playing a role in the emergence of livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA) ST5 in the U.S. swine population. Additionally, our data indicate

  6. Standard test method for measurement of soil resistivity using the two-electrode soil box method

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the equipment and a procedure for the measurement of soil resistivity, for samples removed from the ground, for use in the control of corrosion of buried structures. 1.2 Procedures allow for this test method to be used n the field or in the laboratory. 1.3 The test method procedures are for the resistivity measurement of soil samples in the saturated condition and in the as-received condition. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Soil resistivity values are reported in ohm-centimeter. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  7. Benzimidazole resistance of sheep nematodes in Norway confirmed through controlled efficacy test

    Directory of Open Access Journals (Sweden)

    Domke Atle V

    2012-08-01

    Full Text Available Abstract Background Resistance against benzimidazoles (BZ has recently been detected in Norwegian sheep flocks through a large scale prevalence survey based on the faecal egg count reduction test (FECRT. The use of this test in combination with bulk larval culture only gives an indication of which gastrointestinal nematodes genera that are involved and these results have to be confirmed by a controlled efficacy test (CET to get accurate information about resistant nematodes populations at species level. A CET was therefore performed with larvae from two flocks where BZ resistance was previously detected through FECRT. Results The latter test confirmed the previous results in both flocks. In flock A, the BZ resistant nematode population consisted solely of Haemonchus contortus, whereas H. contortus and Teladorsagia circumcincta comprised the resistant worm population in flock B. Conclusions Some discrepancies that have been recorded between FECRT and CET results regarding time for post-treatment coproscopical examination and a temporary suppression of faecal egg excretion are discussed.

  8. Vancomycin-resistant Enterococcus spp.: validation of susceptibility testing and in vitro activity of vancomycin, linezolid, tigecycline and daptomycin

    DEFF Research Database (Denmark)

    Rathe, Mathias; Kristensen, Lise; Ellermann-Eriksen, Svend

    2010-01-01

    Vancomycin-resistant enterococci (VRE) have emerged to become a significant nosocomial pathogen. However, detection may be challenging and treatment possibilities are limited. Reports of resistance to linezolide, daptomycin and tigecycline underline the need for reliable susceptibility testing wi...

  9. Receipt and timing of HIV drug resistance testing in six U.S. jurisdictions.

    Science.gov (United States)

    Dasgupta, Sharoda; Hall, H Irene; Hernandez, Angela L; Ocfemia, M Cheryl Bañez; Saduvala, Neeraja; Oster, Alexandra M

    2017-12-01

    The Department of Health and Human Services recommends drug resistance testing at linkage to HIV care. Because receipt and timing of testing are not well characterized, we examined testing patterns among persons with diagnosed HIV who are linked to care. Using surveillance data in six jurisdictions for persons aged ≥13 years with HIV infection diagnosed in 2013, we assessed the proportion receiving testing, and among these, the proportion receiving testing at linkage. Multivariable log-binomial regression modeling estimated associations between selected characteristics and receipt of testing (1) overall, and (2) at linkage among those tested. Of 9,408 persons linked to care, 66% received resistance testing, among whom 68% received testing at linkage. Less testing was observed among male persons who inject drugs (PWID), compared with men who have sex with men (adjusted prevalence ratio [aPR]: 0.88; 95% confidence interval [CI]: 0.81-0.97) and persons living in areas with population testing was lower for persons with initial CD4 counts ≥500 cells/mm 3 , compared with those with CD4 counts tested, testing at linkage was lower among male PWID (aPR: 0.85; CI: 0.75-0.95) and, in some jurisdictions, persons with CD4 counts ≥500 cells/mm 3 (aPR range: 0.63-0.73). Two-thirds of persons with diagnosed HIV who were linked to care received resistance testing, and most received testing at linkage as recommended. Improving receipt and timing of testing among male PWID, persons in less populous settings, and in all jurisdictions, regardless of CD4 count, may improve care outcomes.

  10. Muscle hypertrophy and fast fiber type conversions in heavy resistance-trained women.

    Science.gov (United States)

    Staron, R S; Malicky, E S; Leonardi, M J; Falkel, J E; Hagerman, F C; Dudley, G A

    1990-01-01

    Twenty-four women completed a 20-week heavy-resistance weight training program for the lower extremity. Workouts were twice a week and consisted of warm-up exercises followed by three sets each of full squats, vertical leg presses, leg extensions, and leg curls. All exercises were performed to failure using 6-8 RM (repetition maximum). Weight training caused a significant increase in maximal isotonic strength (1 RM) for each exercise. After training, there was a decrease in body fat percentage (p less than 0.05), and an increase in lean body mass (p less than 0.05) with no overall change in thigh girth. Biopsies were obtained before and after training from the superficial portion of the vastus lateralis muscle. Sections were prepared for histological and histochemical examination. Six fiber types (I, IC, IIC, IIA, IIAB, and IIB) were distinguished following routine myofibrillar adenosine triphosphatase histochemistry. Areas were determined for fiber types I, IIA, and IIAB + IIB. The heavy-resistance training resulted in significant hypertrophy of all three groups: I (15%), IIA (45%), and IIAB + IIB (57%). These data are similar to those in men and suggest considerable hypertrophy of all major fiber types is also possible in women if exercise intensity and duration are sufficient. In addition, the training resulted in a significant decrease in the percentage of IIB with a concomitant increase in IIA fibers, suggesting that strength training may lead to fiber conversions.

  11. 11beta-hydroxysteroid dehydrogenase type 1 in adipose tissue and prospective changes in body weight and insulin resistance

    DEFF Research Database (Denmark)

    Koska, Juraj; de Courten, Barbora; Wake, Deborah J

    2006-01-01

    Increased mRNA and activity levels of 11beta-hydroxysteroid dehydrogenase type 1 (11betaHSD1) in human adipose tissue (AT) are associated with obesity and insulin resistance. The aim of our study was to investigate whether 11betaHSD1 expression or activity in abdominal subcutaneous AT of non-diab......-diabetic subjects are associated with subsequent changes in body weight and insulin resistance [homeostasis model assessment of insulin resistance (HOMA-IR)]....

  12. Replicative phenotyping adds value to genotypic resistance testing in heavily pre-treated HIV-infected individuals - the Swiss HIV Cohort Study

    Directory of Open Access Journals (Sweden)

    Martinetti Gladys

    2011-01-01

    Full Text Available Abstract Background Replicative phenotypic HIV resistance testing (rPRT uses recombinant infectious virus to measure viral replication in the presence of antiretroviral drugs. Due to its high sensitivity of detection of viral minorities and its dissecting power for complex viral resistance patterns and mixed virus populations rPRT might help to improve HIV resistance diagnostics, particularly for patients with multiple drug failures. The aim was to investigate whether the addition of rPRT to genotypic resistance testing (GRT compared to GRT alone is beneficial for obtaining a virological response in heavily pre-treated HIV-infected patients. Methods Patients with resistance tests between 2002 and 2006 were followed within the Swiss HIV Cohort Study (SHCS. We assessed patients' virological success after their antiretroviral therapy was switched following resistance testing. Multilevel logistic regression models with SHCS centre as a random effect were used to investigate the association between the type of resistance test and virological response (HIV-1 RNA Results Of 1158 individuals with resistance tests 221 with GRT+rPRT and 937 with GRT were eligible for analysis. Overall virological response rates were 85.1% for GRT+rPRT and 81.4% for GRT. In the subgroup of patients with >2 previous failures, the odds ratio (OR for virological response of GRT+rPRT compared to GRT was 1.45 (95% CI 1.00-2.09. Multivariate analyses indicate a significant improvement with GRT+rPRT compared to GRT alone (OR 1.68, 95% CI 1.31-2.15. Conclusions In heavily pre-treated patients rPRT-based resistance information adds benefit, contributing to a higher rate of treatment success.

  13. The correlation of adiponectin, IL-6 with insulin resistance and macrovascular lesion in type 2 diabetes

    International Nuclear Information System (INIS)

    Shi Bimin; Cheng Xingbo

    2006-01-01

    Objective: To investigate the serum level changes of adiponectin and IL-6 and their relation with macrovascular complications in patients with type 2 diabetes before and after thiazolidinediones intervention. Methods: Serum adiponectin and IL-6 level were examined using ELISA method in 16 patients with obese type 2 diabetes, 24 patients with diabetes with normal body weight, and 14 controls. Their body mass index (BMI) and HOMA-IR were calculated and the internal membrane thickness (IMT) of carotid artery was also observed. These indexes were reexamined after thiazolidinediones (Avandia) intervention and correlation analysis was performed. Results: A decreased serum concentration of adiponectin and an elevated level of IL-6 and HOMA-IR were found in diabetes group especially in those with obesity (P<0.01). Serum adiponectin was negatively correlated with HOMA-IR, BMI, IL-6 and IMT while IL-6 was positively correlated with the above-mentioned indexes. After treatment with thiazolidinediones, the insulin resistance state and adponectin and IL-6 were significantly improved especially in those with obesity (P<0.05, P<0.01). Conclusion: Adiponectin is closed correlated with obesity (P<0.05, P<0.01). Conclusion: Adiponectin is closed correlated with obesity, insulin resistance and macrovascular lesions. IL-6 may be involved in the mechanism of insulin resistance in type 2 diabetes patients especially in the obese diabetes group. In addition to enhance the sensitivity of insulin, thiazolidinediones may play a potential role in anti-inflammation, anti-atherosclerosis and immuno-regulation. (authors)

  14. Irradiation test plan of oxidation-resistant graphite in WWR-K Research Reactor

    International Nuclear Information System (INIS)

    Sumita, Junya; Shibata, Taiju; Sakaba, Nariaki; Osaki, Hirotaka; Kato, Hideki; Fujitsuka, Kunihiro; Muto, Takenori; Gizatulin, Shamil; Shaimerdenov, Asset; Dyussambayev, Daulet; Chakrov, Petr

    2014-01-01

    Graphite materials are used for the in-core components of High Temperature Gas-cooled Reactor (HTGR) which is a graphite-moderated and helium gas-cooled reactor. In the case of air ingress accident in HTGR, SiO_2 protective layer is formed on the surface of SiC layer in TRISO CFP and oxidation of SiC does not proceed and fission products are retained inside the fuel particle. A new safety concept for the HTGR, called Naturally Safe HTGR, has been recently proposed. To enhance the safety of Naturally Safe HTGR ultimately, it is expected that oxidation-resistant graphite is used for graphite components to prevent the TRISO CFPs and fuel compacts from failure. SiC coating is one of candidate methods for oxidation-resistant graphite. JAEA and four graphite companies launched R&Ds to develop the oxidation-resistant graphite and the International Science and Technology Center (ISTC) partner project with JAEA and INP was launched to investigate the irradiation effects on the oxidation-resistant graphite. To determine grades of the oxidation-resistant graphite which will be adopted as irradiation test, a preliminary oxidation test was carried out. This paper described the results of the preliminary oxidation test, the plan of out-of-pile test, irradiation test and post-irradiation test (PIE) of the oxidation-resistant graphite. The results of the preliminary oxidation test showed that the integrity of the oxidation resistant graphite was confirmed and that all of grades used in the preliminary test can be adopted as the irradiation test. Target irradiation temperature was determined to be 1473 (K) and neutron fluence was determined to be from 0.54 × 10"2"5through 1.4 × 10"2"5 (/m"2, E>0.18MeV). Weight change, oxidation rate, activation energy, surface condition, etc. will be evaluated in out-of-pile test and weight change, irradiation effect on oxidation rate and activation energy, surface condition, etc. will be evaluated in PIE. (author)

  15. A new multiplex PCR for easy screening of methicillin-resistant Staphylococcus aureus SCCmec types I-V

    DEFF Research Database (Denmark)

    Boye, Kit; Bartels, Mette Damkjær; Andersen, Ina S

    2007-01-01

    A multiplex PCR with four primer-pairs was designed to identify the five main known SCCmec types. A clear and easily discriminated band pattern was obtained for all five types. The SCCmec type was identified for 98% of 312 clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA......). SCCmec type IV was by far the most common SCCmec type among both hospital- and community-acquired MRSA isolates in Denmark....

  16. Passive measurement of flux nucleation in the current-induced resistive state of type I superconductors

    International Nuclear Information System (INIS)

    Selig, K.P.; Chimenti, D.E.; Huebener, R.P.

    1978-01-01

    Flux-tube nucleation rates have been measured in the current-induced resistive state of type I superconducting In films between 1.5 and 2.0 K by a completely passive technique. Indication of periodic nucleation is observed only in narrow regions of sample voltage drop, whose position is a sensitive function of temperature. Frequency bandwidth measurements of the nucleation rate yield a spectral purity of one part in 10 4 within the narrow regions where an experimental signal can be detected. (orig.) [de

  17. A new multiplex PCR for easy screening of methicillin-resistant Staphylococcus aureus SCCmec types I-V

    DEFF Research Database (Denmark)

    Boye, Kit; Bartels, Mette Damkjær; Andersen, Ina S

    2007-01-01

    A multiplex PCR with four primer-pairs was designed to identify the five main known SCCmec types. A clear and easily discriminated band pattern was obtained for all five types. The SCCmec type was identified for 98% of 312 clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA...

  18. Prion Fragment Peptides Are Digested with Membrane Type Matrix Metalloproteinases and Acquire Enzyme Resistance through Cu2+-Binding

    Directory of Open Access Journals (Sweden)

    Aya Kojima

    2014-05-01

    Full Text Available Prions are the cause of neurodegenerative disease in humans and other mammals. The structural conversion of the prion protein (PrP from a normal cellular protein (PrPC to a protease-resistant isoform (PrPSc is thought to relate to Cu2+ binding to histidine residues. In this study, we focused on the membrane-type matrix metalloproteinases (MT-MMPs such as MT1-MMP and MT3-MMP, which are expressed in the brain as PrPC-degrading proteases. We synthesized 21 prion fragment peptides. Each purified peptide was individually incubated with recombinant MT1-MMP or MT3-MMP in the presence or absence of Cu2+ and the cleavage sites determined by LC-ESI-MS analysis. Recombinant MMP-7 and human serum (HS were also tested as control. hPrP61-90, from the octapeptide-repeat region, was cleaved by HS but not by the MMPs tested here. On the other hand, hPrP92-168 from the central region was cleaved by MT1-MMP and MT3-MMP at various sites. These cleavages were inhibited by treatment with Cu2+. The C-terminal peptides had higher resistance than the central region. The data obtained from this study suggest that MT-MMPs expressed in the brain might possess PrPC-degrading activity.

  19. Tokamaks with high-performance resistive magnets: advanced test reactors and prospects for commercial applications

    International Nuclear Information System (INIS)

    Bromberg, L.; Cohn, D.R.; Williams, J.E.C.; Becker, H.; Leclaire, R.; Yang, T.

    1981-10-01

    Scoping studies have been made of tokamak reactors with high performance resistive magnets which maximize advantages gained from high field operation and reduced shielding requirements, and minimize resistive power requirements. High field operation can provide very high values of fusion power density and n tau/sub e/ while the resistive power losses can be kept relatively small. Relatively high values of Q' = Fusion Power/Magnet Resistive Power can be obtained. The use of high field also facilitates operation in the DD-DT advanced fuel mode. The general engineering and operational features of machines with high performance magnets are discussed. Illustrative parameters are given for advanced test reactors and for possible commercial reactors. Commercial applications that are discussed are the production of fissile fuel, electricity generation with and without fissioning blankets and synthetic fuel production

  20. HIV genotype resistance testing in antiretroviral (ART) exposed Indian children--a need of the hour.

    Science.gov (United States)

    Shah, Ira; Parikh, Shefali

    2013-04-01

    Development of drug resistance in HIV infected children with treatment failure is a major impediment to selection of appropriate therapy. HIV genotype resistance assays predict drug resistance on the basis of mutations in the viral genome. However, their clinical utility, especially in a resource limited setting is still a subject of debate. The authors report two cases in which both the children suffered from treatment failure of various antiretroviral therapy regimes. In both the cases, Genotype Resistance Testing (GRT) prompted a radical change from proposed failure therapy as per existing guidelines. GRT was specifically important for the selection of a new dual Nucleoside reverse transcriptase inhibitors (NRTI) component of failure regimen by identifying TAMS and M184V mutations in the HIV genome. These case reports highlight the importance of GRT in children failing multiple antiretroviral regimes; and emphasizes the need to recognize situations where GRT is absolutely essential to guide appropriate therapy, even in a resource limited setting.

  1. Detection of anthelmintic resistance in sheep and goat against fenbendazole by faecal egg count reduction test.

    Science.gov (United States)

    Singh, Ramandeep; Bal, M S; Singla, L D; Kaur, Paramjit

    2017-06-01

    Anthelmintic resistance against commonly used anthelmintic fenbendazole was evaluated by employing faecal egg count reduction test (FECRT) in naturally occurring gastrointestinal (GI) nematodes in the semi organized sheep and goat farms of Ludhiana and Amritsar districts. A total of 80 animals (20 each for sheep and goat in both districts) were randomly selected and their faecal samples were examined by qualitative and quantitative parasitological techniques. Results indicate presence of high level of resistance against fenbendazole in both sheep and goat population of Ludhiana and Amritsar districts. More resistance was observed in the GI nematodes from animals reared in Amritsar district as compared to Ludhiana district. The level of anthelmintic resistance observed was apparently more in sheep than goats.

  2. Ballistic Resistance of Armored Passenger Vehicles: Test Protocols and Quality Methods

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey M. Lacy; Robert E. Polk

    2005-07-01

    This guide establishes a test methodology for determining the overall ballistic resistance of the passenger compartment of assembled nontactical armored passenger vehicles (APVs). Because ballistic testing of every piece of every component of an armored vehicle is impractical, if not impossible, this guide describes a testing scheme based on statistical sampling of exposed component surface areas. Results from the test of the sampled points are combined to form a test score that reflects the probability of ballistic penetration into the passenger compartment of the vehicle.

  3. DR_SEQAN: a PC/Windows-based software to evaluate drug resistance using human immunodeficiency virus type 1 genotypes

    Directory of Open Access Journals (Sweden)

    Menéndez-Arias Luis

    2006-03-01

    Full Text Available Abstract Background Genotypic assays based on DNA sequencing of part or the whole reverse transcriptase (RT- and protease (PR-coding regions of the human immunodeficiency virus type 1 (HIV-1 genome have become part of the routine clinical management of HIV-infected individuals. However, the results are difficult to interpret due to complex interactions between mutations found in viral genes. Results DR_SEQAN is a tool to analyze RT and PR sequences. The program output includes a list containing all of the amino acid changes found in the query sequence in comparison with the sequence of a wild-type HIV-1 strain. Translation of codons containing nucleotide mixtures can result in potential ambiguities or heterogeneities in the amino acid sequence. The program identifies all possible combinations of 2 or 3 amino acids that derive from translation of triplets containing nucleotide mixtures. In addition, when ambiguities affect codons relevant for drug resistance, DR_SEQAN allows the user to select the appropriate mutation to be considered by the program's drug resistance interpretation algorithm. Resistance is predicted using a rule-based algorithm, whose efficiency and accuracy has been tested with a large set of drug susceptibility data. Drug resistance predictions given by DR_SEQAN were consistent with phenotypic data and coherent with predictions provided by other publicly available algorithms. In addition, the program output provides two tables showing published drug susceptibility data and references for mutations and combinations of mutations found in the analyzed sequence. These data are retrieved from an integrated relational database, implemented in Microsoft Access, which includes two sets of non-redundant core tables (one for combinations of mutations in the PR and the other for combinations in the RT. Conclusion DR_SEQAN is an easy to use off-line application that provides expert advice on HIV genotypic resistance interpretation. It is

  4. Corrosion resistance and electrochemical potentiokinetic reactivation testing of some iron-base hardfacing alloys

    International Nuclear Information System (INIS)

    Cockeram, B.V.

    1999-01-01

    Hardfacing alloys are weld deposited on a base material to provide a wear resistant surface. Commercially available iron-base hardfacing alloys are being evaluated for replacement of cobalt-base alloys to reduce nuclear plant activation levels. Corrosion testing was used to evaluate the corrosion resistance of several iron-base hardfacing alloys in highly oxygenated environments. The corrosion test results indicate that iron-base hardfacing alloys in the as-deposited condition have acceptable corrosion resistance when the chromium to carbon ratio is greater than 4. Tristelle 5183, with a high niobium (stabilizer) content, did not follow this trend due to precipitation of niobium-rich carbides instead of chromium-rich carbides. This result indicates that iron-base hardfacing alloys containing high stabilizer contents may possess good corrosion resistance with Cr:C < 4. NOREM 02, NOREM 01, and NoCo-M2 hardfacing alloys had acceptable corrosion resistance in the as-deposited and 885 C/4 hour heat treated condition, but rusting from sensitization was observed in the 621 C/6 hour heat treated condition. The feasibility of using an Electrochemical Potentiokinetic Reactivation (EPR) test method, such as used for stainless steel, to detect sensitization in iron-base hardfacing alloys was evaluated. A single loop-EPR method was found to provide a more consistent measurement of sensitization than a double loop-EPR method. The high carbon content that is needed for a wear resistant hardfacing alloy produces a high volume fraction of chromium-rich carbides that are attacked during EPR testing. This results in inherently lower sensitivity for detection of a sensitized iron-base hardfacing alloy than stainless steel using conventional EPR test methods

  5. Fnip1 regulates skeletal muscle fiber type specification, fatigue resistance, and susceptibility to muscular dystrophy

    Science.gov (United States)

    Reyes, Nicholas L.; Banks, Glen B.; Tsang, Mark; Margineantu, Daciana; Gu, Haiwei; Djukovic, Danijel; Chan, Jacky; Torres, Michelle; Liggitt, H. Denny; Hirenallur-S, Dinesh K.; Hockenbery, David M.; Raftery, Daniel; Iritani, Brian M.

    2015-01-01

    Mammalian skeletal muscle is broadly characterized by the presence of two distinct categories of muscle fibers called type I “red” slow twitch and type II “white” fast twitch, which display marked differences in contraction strength, metabolic strategies, and susceptibility to fatigue. The relative representation of each fiber type can have major influences on susceptibility to obesity, diabetes, and muscular dystrophies. However, the molecular factors controlling fiber type specification remain incompletely defined. In this study, we describe the control of fiber type specification and susceptibility to metabolic disease by folliculin interacting protein-1 (Fnip1). Using Fnip1 null mice, we found that loss of Fnip1 increased the representation of type I fibers characterized by increased myoglobin, slow twitch markers [myosin heavy chain 7 (MyH7), succinate dehydrogenase, troponin I 1, troponin C1, troponin T1], capillary density, and mitochondria number. Cultured Fnip1-null muscle fibers had higher oxidative capacity, and isolated Fnip1-null skeletal muscles were more resistant to postcontraction fatigue relative to WT skeletal muscles. Biochemical analyses revealed increased activation of the metabolic sensor AMP kinase (AMPK), and increased expression of the AMPK-target and transcriptional coactivator PGC1α in Fnip1 null skeletal muscle. Genetic disruption of PGC1α rescued normal levels of type I fiber markers MyH7 and myoglobin in Fnip1-null mice. Remarkably, loss of Fnip1 profoundly mitigated muscle damage in a murine model of Duchenne muscular dystrophy. These results indicate that Fnip1 controls skeletal muscle fiber type specification and warrant further study to determine whether inhibition of Fnip1 has therapeutic potential in muscular dystrophy diseases. PMID:25548157

  6. Minor drug-resistant HIV type-1 variants in breast milk and plasma of HIV type-1-infected Ugandan women after nevirapine single-dose prophylaxis.

    Science.gov (United States)

    Pilger, Daniel; Hauser, Andrea; Kuecherer, Claudia; Mugenyi, Kizito; Kabasinguzi, Rose; Somogyi, Sybille; Harms, Gundel; Kunz, Andrea

    2011-01-01

    Nevirapine single-dose (NVP-SD) reduces mother-to-child transmission of HIV type-1 (HIV-1), but frequently induces resistance mutations in the HIV-1 genome. Little is known about drug-resistant HIV-1 variants in the breast milk of women who have taken NVP-SD. Blood and breast milk samples of 39 HIV-1-infected Ugandan women were taken 6-12 weeks after NVP-SD intake. Samples were analysed by population sequencing and allele-specific real-time PCR (AS-PCR) with detection limits for NVP-resistant HIV-1 variants (K103N and Y181C) of D n = 5, G n = 2 and C n = 1). A total of 7 (37%) and 10 (53%) women carried NVP-resistant virus in breast milk and plasma, respectively. Overall, 71% (5/7) women with NVP-resistant HIV-1 in breast milk displayed >1 drug-resistant variant. Resistance in breast milk was higher at week 6 (6/13 samples [46%]) compared with week 12 (1/6 samples [17%]). In total, 10 drug-resistant populations harbouring the K103N and/or Y181C mutation were detected in the 19 breast milk samples; 7 (70%) were caused by resistant minorities (< 5% of the total HIV-1 population). In the four women with drug-resistant virus in both plasma and breast milk, the mutation patterns differed between the two compartments. Minor populations of drug-resistant HIV-1 were frequently found in breast milk of Ugandan women after exposure to NVP-SD. Further studies need to explore the role of minor drug-resistant variants in the postnatal transmission of (resistant) HIV-1.

  7. Tests for genetic interactions in type 1 diabetes

    DEFF Research Database (Denmark)

    Morahan, Grant; Mehta, Munish; James, Ian

    2011-01-01

    Interactions between genetic and environmental factors lead to immune dysregulation causing type 1 diabetes and other autoimmune disorders. Recently, many common genetic variants have been associated with type 1 diabetes risk, but each has modest individual effects. Familial clustering of type 1...... diabetes has not been explained fully and could arise from many factors, including undetected genetic variation and gene interactions....

  8. Leach testing of waste forms: interrelationship of ISO and MCC type tests

    International Nuclear Information System (INIS)

    Oversby, V.M.

    1982-01-01

    Leach testing experiments were conducted on SYNROC-D material to examine the parameters which affect leaching results and to measure the activation energy for leaching of elements from SYNROC-D. Measured leach rates were found to be controlled by precipitation of insoluble phases for those tests where the sample surface area to volume of leachant (SA/V) multiplied by leaching time (t) exceeded 0.3 cm -1 d for leach tests at 90 0 C. In these cases the apparent activation energy for leaching was approximately 10 kcal/mole based on Na and Si data. For leach tests at 90 0 C with (Sa/V)(t) less than 0.2 cm -1 d, the activation energy for Na and Si dissolution was 18.5 kcal/mole for sample S29 and 14.5 kcal/mole for sample LSO4. The effect of sample geometry was investigated by leaching a series of crushed samples of different grain size. The results support the view that geometric surface area should be used in leach rate calculations rather than gas adsorption BET surface area. Comparison of results on S29 leaching of crushed samples and monoliths show that data from MCC-1 and ISO type leach tests may be directly compared when the data are examined at constant (SA/V)(t). 5 figures, 13 tables

  9. Antibiotic Resistance, RAPD- PCR Typing of Multiple Drug Resistant Strains of Escherichia Coli From Urinary Tract Infection (UTI).

    Science.gov (United States)

    Marialouis, Xavier Alexander; Santhanam, Amutha

    2016-03-01

    Global spreading of multidrug resistant strains of Escherichia coli is responsible for Urinary Tract Infection (UTI) which is a major health problem in of concern. Among the gram negative bacteria, the major contributors for UTI belongs to the family Enterobacteriaceae, which includes E. coli, Klebsiella, Citrobacter and Proteus. However, E. coli accounts for the major cause of Urinary tract infections (UTIs) and accounts for 75% to 90% of UTI isolates. The main aim of this study is to analyse the phylogenetic grouping of clinical isolates of UTI E. coli. In this study nearly 58 E. coli strains were isolated and confirmed through microbiological, biochemical characterization. The urine samples were collected from outpatients having symptoms of UTI, irrespective of age and sex in Tamil Nadu, India. The isolates were subjected to analyse for ESBL and AmpC β-lactamase production. To understand its genetic correlation, molecular typing was carried out using RAPD-PCR method. Here we noted phenotypically twenty seven isolates were positive for ESBL and seven for AmpC β-lactamase production. However, among the ESBL isolates higher sensitivity was noted for Nitrofurantoin and Cefoxitin. It is worth to note that the prevalence of UTIs was more common among female and elderly male. Phylogenetic grouping revealed the presence of 24 isolates belonged to B2 group followed by 19 isolates to group A, eight isolates to group B1 and Seven isolates to group D. Phenotypically most of the strains were positive for ESBL and showed high sensitivity for Nitrofurantoin and cefoxitin.

  10. An evaluation of propane as a fuel for testing fire-resistant oil spill containment booms

    International Nuclear Information System (INIS)

    Walton, W. D.; Twilley, W. H.

    1997-01-01

    A series of experiments have been conducted to measure and compare the thermal exposure to a fire-resistant boom from liquid hydrocarbon fuel and propane fires. The objective was to test the potential of propane fueled fires as a fire source for testing fire-resistant oil spill containment booms.Thermal exposure from propane fires have been measured with and without waves. Results indicated that although propane diffusion flames on water look like liquid hydrocarbon fuel flames and produce very little smoke, the heat flux at the boom location from propane fires is about 60 per cent of that from liquid hydrocarbon fuel fires. Despite the attractive features in terms of ease of application, control and smoke emissions, it was concluded that the low heat flux would preclude the application of propane as a fuel for evaluating fire resistant containment booms. 2 refs., 7 figs

  11. Resistance Exercise Restores Endothelial Function and Reduces Blood Pressure in Type 1 Diabetic Rats

    Directory of Open Access Journals (Sweden)

    Marcelo Mendonça Mota

    2014-07-01

    Full Text Available Background: Resistance exercise effects on cardiovascular parameters are not consistent. Objectives: The effects of resistance exercise on changes in blood glucose, blood pressure and vascular reactivity were evaluated in diabetic rats. Methods: Wistar rats were divided into three groups: control group (n = 8; sedentary diabetic (n = 8; and trained diabetic (n = 8. Resistance exercise was carried out in a squat device for rats and consisted of three sets of ten repetitions with an intensity of 50%, three times per week, for eight weeks. Changes in vascular reactivity were evaluated in superior mesenteric artery rings. Results: A significant reduction in the maximum response of acetylcholine-induced relaxation was observed in the sedentary diabetic group (78.1 ± 2% and an increase in the trained diabetic group (95 ± 3% without changing potency. In the presence of NG-nitro-L-arginine methyl ester, the acetylcholine-induced relaxation was significantly reduced in the control and trained diabetic groups, but not in the sedentary diabetic group. Furthermore, a significant increase (p < 0.05 in mean arterial blood pressure was observed in the sedentary diabetic group (104.9 ± 5 to 126.7 ± 5 mmHg as compared to that in the control group. However, the trained diabetic group showed a significant decrease (p < 0.05 in the mean arterial blood pressure levels (126.7 ± 5 to 105.1 ± 4 mmHg as compared to the sedentary diabetic group. Conclusions: Resistance exercise could restore endothelial function and prevent an increase in arterial blood pressure in type 1 diabetic rats.

  12. Low cardiorespiratory fitness in people at risk for type 2 diabetes: early marker for insulin resistance

    Directory of Open Access Journals (Sweden)

    Leite Silmara AO

    2009-09-01

    Full Text Available Abstract Purpose There is a significant association between insulin resistance and low cardiorespiratory fitness in nondiabetic subjects. In a population with risk factors for type 2 diabetes (T2DM, before they are insulin resistant, we investigated low exercise capacity (VO2max as an early marker of impaired insulin sensitivity in order to determine earlier interventions to prevent development of insulin resistance syndrome (IRS and T2DM. Methods Cross-sectional analyses of data on 369 (78 men and 291 women people at risk for IRS and T2DM, aged 45.6 +/- 10 years (20-65 years old from the Community Diabetes Prevention Project in Minnesota were carried out. The cardiorespiratory fitness (VO2max by respiratory gas exchange and bicycle ergometer were measured in our at risk non insulin resistant population and compared with a control group living in the same geographic area. Both groups were equally sedentary, matched for age, gender and BMI. Results The most prevalent abnormality in the study population was markedly low VO2max when compared with general work site screening control group, (n = 177; 137F; 40 M, mean age 40 ± 11 years; BMI = 27.8 ± 6.1 kg/m2. Individuals at risk for IRS and T2DM had a VO2max (22 ± 6 ml/kg/min 15% lower than the control group VO2max (26 ± 9 ml/kg/min (p 2max was inversely correlated with HOMA-IR (r = -0.30, p Conclusions Decreased VO2max is correlated with impaired insulin sensitivity and was the most prevalent abnormality in a population at risk for IRS and T2DM but without overt disease. This raises the possibility that decreased VO2 max is among the earliest indicators of IRS and T2DM therefore, an important risk factor for disease progression.

  13. Resistance Exercise Restores Endothelial Function and Reduces Blood Pressure in Type 1 Diabetic Rats

    Energy Technology Data Exchange (ETDEWEB)

    Mota, Marcelo Mendonça; Silva, Tharciano Luiz Teixeira Braga da; Fontes, Milene Tavares; Barreto, André Sales; Araújo, João Eliakim dos Santos [Departamento de Fisiologia - Universidade Federal de Sergipe (UFS), São Cristóvão, SE (Brazil); Oliveira, Antônio Cesar Cabral de; Wichi, Rogério Brandão [Departamento de Educação Física - UFS, São Cristóvão, SE (Brazil); Santos, Márcio Roberto Viana, E-mail: marciorvsantos@bol.com.br [Departamento de Fisiologia - Universidade Federal de Sergipe (UFS), São Cristóvão, SE (Brazil)

    2014-07-15

    Resistance exercise effects on cardiovascular parameters are not consistent. The effects of resistance exercise on changes in blood glucose, blood pressure and vascular reactivity were evaluated in diabetic rats. Wistar rats were divided into three groups: control group (n = 8); sedentary diabetic (n = 8); and trained diabetic (n = 8). Resistance exercise was carried out in a squat device for rats and consisted of three sets of ten repetitions with an intensity of 50%, three times per week, for eight weeks. Changes in vascular reactivity were evaluated in superior mesenteric artery rings. A significant reduction in the maximum response of acetylcholine-induced relaxation was observed in the sedentary diabetic group (78.1 ± 2%) and an increase in the trained diabetic group (95 ± 3%) without changing potency. In the presence of NG-nitro-L-arginine methyl ester, the acetylcholine-induced relaxation was significantly reduced in the control and trained diabetic groups, but not in the sedentary diabetic group. Furthermore, a significant increase (p < 0.05) in mean arterial blood pressure was observed in the sedentary diabetic group (104.9 ± 5 to 126.7 ± 5 mmHg) as compared to that in the control group. However, the trained diabetic group showed a significant decrease (p < 0.05) in the mean arterial blood pressure levels (126.7 ± 5 to 105.1 ± 4 mmHg) as compared to the sedentary diabetic group. Resistance exercise could restore endothelial function and prevent an increase in arterial blood pressure in type 1 diabetic rats.

  14. Resistance Exercise Restores Endothelial Function and Reduces Blood Pressure in Type 1 Diabetic Rats

    International Nuclear Information System (INIS)

    Mota, Marcelo Mendonça; Silva, Tharciano Luiz Teixeira Braga da; Fontes, Milene Tavares; Barreto, André Sales; Araújo, João Eliakim dos Santos; Oliveira, Antônio Cesar Cabral de; Wichi, Rogério Brandão; Santos, Márcio Roberto Viana

    2014-01-01

    Resistance exercise effects on cardiovascular parameters are not consistent. The effects of resistance exercise on changes in blood glucose, blood pressure and vascular reactivity were evaluated in diabetic rats. Wistar rats were divided into three groups: control group (n = 8); sedentary diabetic (n = 8); and trained diabetic (n = 8). Resistance exercise was carried out in a squat device for rats and consisted of three sets of ten repetitions with an intensity of 50%, three times per week, for eight weeks. Changes in vascular reactivity were evaluated in superior mesenteric artery rings. A significant reduction in the maximum response of acetylcholine-induced relaxation was observed in the sedentary diabetic group (78.1 ± 2%) and an increase in the trained diabetic group (95 ± 3%) without changing potency. In the presence of NG-nitro-L-arginine methyl ester, the acetylcholine-induced relaxation was significantly reduced in the control and trained diabetic groups, but not in the sedentary diabetic group. Furthermore, a significant increase (p < 0.05) in mean arterial blood pressure was observed in the sedentary diabetic group (104.9 ± 5 to 126.7 ± 5 mmHg) as compared to that in the control group. However, the trained diabetic group showed a significant decrease (p < 0.05) in the mean arterial blood pressure levels (126.7 ± 5 to 105.1 ± 4 mmHg) as compared to the sedentary diabetic group. Resistance exercise could restore endothelial function and prevent an increase in arterial blood pressure in type 1 diabetic rats

  15. Finite element analysis and fracture resistance testing of a new intraradicular post

    Directory of Open Access Journals (Sweden)

    Eron Toshio Colauto Yamamoto

    2012-08-01

    Full Text Available OBJECTIVES: The objective of the present study was to evaluate a prefabricated intraradicular threaded pure titanium post, designed and developed at the São José dos Campos School of Dentistry - UNESP, Brazil. This new post was designed to minimize stresses observed with prefabricated post systems and to improve cost-benefits. MATERIAL AND METHODS: Fracture resistance testing of the post/core/root complex, fracture analysis by microscopy and stress analysis by the finite element method were used for post evaluation. The following four prefabricated metal post systems were analyzed: group 1, experimental post; group 2, modification of the experimental post; group 3, Flexi Post, and group 4, Para Post. For the analysis of fracture resistance, 40 bovine teeth were randomly assigned to the four groups (n=10 and used for the fabrication of test specimens simulating the situation in the mouth. The test specimens were subjected to compressive strength testing until fracture in an EMIC universal testing machine. After fracture of the test specimens, their roots were sectioned and analyzed by microscopy. For the finite element method, specimens of the fracture resistance test were simulated by computer modeling to determine the stress distribution pattern in the post systems studied. RESULTS: The fracture test presented the following averages and standard deviation: G1 (45.63±8.77, G2 (49.98±7.08, G3 (43.84±5.52, G4 (47.61±7.23. Stress was homogenously distributed along the body of the intraradicular post in group 1, whereas high stress concentrations in certain regions were observed in the other groups. These stress concentrations in the body of the post induced the same stress concentration in root dentin. CONCLUSIONS: The experimental post (original and modified versions presented similar fracture resistance and better results in the stress analysis when compared with the commercial post systems tested (08/2008-PA/CEP.

  16. THE PHENOMENON OF RESISTANCE TO CHANGE: THE NATURE, TYPES AND FORMS

    OpenAIRE

    N. M. Kobzeva

    2013-01-01

    The article describes the essence of the phenomenon of resistance to change. The au-thor's definition of «resistance to change» is given. The existing approaches to the study of resistance to change are analyzed. Causes of resistance to change in organiza-tions are described. Generalizing classification of resistance to change is proposed.

  17. Calculational experimental examination and ensuring of equipment and pipelines seismic resistance at starting and operating water-cooled and moderated reactor WWER-type NPPs. Final report

    International Nuclear Information System (INIS)

    1999-01-01

    The results of testing of equipment at Bohunice NPP and pipeline systems at Unit 3 of Kozloduy NPP (WWER-440 type reactors) are presented in this Final Report. These results side by side with experimental values of natural frequencies and decrements also include experimental data about vibration modes of tested equipment and pipelines. For the first time the results of new calculational-experimental examination of equipment seismic resistance at Unit 2 of Armenian NPP are presented. At Kozloduy NPP direction's request the planed additional tests of some selected items were put off on 1997. Instead of postponed tests we carried out detailed analysis of our past inspections of numerous equipment seismic resistance at the Unit 5 of Kozloduy NPP. Experimental data with results of additional analysis are presented

  18. Single nucleotide polymorphisms in i-type lysozyme gene and their correlation with vibrio-resistance and growth of clam Meretrix meretrix based on the selected resistance stocks.

    Science.gov (United States)

    Yue, Xin; Wang, Hongxia; Huang, Xiaohong; Wang, Chao; Chai, Xueliang; Wang, Chunde; Liu, Baozhong

    2012-09-01

    I-type lysozyme is considered to play crucial roles in both anti-bacteria and digestion function of the bivalve, which signifies that it is related to both immunity and growth. In this study, based on the principle of case-control association analysis, using the stock materials with different vibrio-resistance profile obtained by selective breeding, single nucleotide polymorphisms (SNPs) in the DNA partial sequence of an i-type lysozyme of Meretrix meretrix (MmeLys) were discovered and examined for their association with vibrio-resistance and growth. Twenty-seven SNPs were detected and fifteen of them were genotyped in clam stocks with different resistance to Vibrio harveyi (09-C and 09-R) and to Vibrio parahaemolyticus (11-S and 11-R). Allele frequency distribution among different stocks was compared. And wet weight of clams with different genotype at each SNP locus was compared. The results indicated that SNP locus 9 was associated with V. harveyi and V. parahaemolyticus resistance and growth of M. meretrix. Loci 12 and 14 were associated with both V. parahaemolyticus-resistance and growth, and also have the potential to be related with V. harveyi-resistance of M. meretrix. Therefore these three SNPs especially locus 9 were the potential markers which may be involved in assisting resistance selective breeding. In addition, this study showed evidence that improvements in clam resistance to vibriosis could be achieved through selective breeding. All results provided encouragement for the continuation of the selective breeding program for vibrio-resistance gain in clam M. meretrix and the application of polymorphisms in MmeLys to the future marker assisted selection. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Development, test-retest reliability, and construct validity of the resistance training skills battery.

    Science.gov (United States)

    Lubans, David R; Smith, Jordan J; Harries, Simon K; Barnett, Lisa M; Faigenbaum, Avery D

    2014-05-01

    The aim of this study was to describe the development and assess test-retest reliability and construct validity of the Resistance Training Skills Battery (RTSB) for adolescents. The RTSB provides an assessment of resistance training skill competency and includes 6 exercises (i.e., body weight squat, push-up, lunge, suspended row, standing overhead press, and front support with chest touches). Scoring for each skill is based on the number of performance criteria successfully demonstrated. An overall resistance training skill quotient (RTSQ) is created by adding participants' scores for the 6 skills. Participants (44 boys and 19 girls, mean age = 14.5 ± 1.2 years) completed the RTSB on 2 occasions separated by 7 days. Participants also completed the following fitness tests, which were used to create a muscular fitness score (MFS): handgrip strength, timed push-up, and standing long jump tests. Intraclass correlation (ICC), paired samples t-tests, and typical error were used to assess test-retest reliability. To assess construct validity, gender and RTSQ were entered into a regression model predicting MFS. The rank order repeatability of the RTSQ was high (ICC = 0.88). The model explained 39% of the variance in MFS (p ≤ 0.001) and RTSQ (r = 0.40, p ≤ 0.001) was a significant predictor. This study has demonstrated the construct validity and test-retest reliability of the RTSB in a sample of adolescents. The RTSB can reliably rank participants in regards to their resistance training competency and has the necessary sensitivity to detect small changes in resistance training skill proficiency.

  20. Proliferation Resistance and Material Type considerations within the Collaborative Project for a European Sodium Fast Reactor

    International Nuclear Information System (INIS)

    Renda, Guido; Alim, Fatih; Cojazzi, Giacomo GM.

    2015-01-01

    The collaborative project for a European Sodium Fast Reactor (CP‑ESFR) is an international project where 25 European partners developed Research & Development solutions and concepts for a European sodium fast reactor. The project was funded by the 7. European Union Framework Programme and covered topics such as the reactor architectures and components, the fuel, the fuel element and the fuel cycle, and the safety concepts. Within sub‑project 3, dedicated to safety, a task addressed proliferation resistance considerations. The Generation IV International Forum (GIF) Proliferation Resistance and Physical Protection (PR and PP) Evaluation Methodology has been selected as the general framework for this work, complemented by punctual aspects of the IAEA‑INPRO Proliferation Resistance methodology and other literature studies - in particular for material type characterization. The activity has been carried out taking the GIF PR and PP Evaluation Methodology and its Addendum as the general guideline for identifying potential nuclear material diversion targets. The targets proliferation attractiveness has been analyzed in terms of the suitability of the targets’ nuclear material as the basis for its use in nuclear explosives. To this aim the PR and PP Fissile Material Type measure was supplemented by other literature studies, whose related metrics have been applied to the nuclear material items present in the considered core alternatives. This paper will firstly summarize the main ESFR design aspects relevant for PR following the structure of the GIF PR and PP White Paper template. An analysis on proliferation targets is then discussed, with emphasis on their characterization from a nuclear material point of view. Finally, a high‑level ESFR PR analysis according to the four main proliferation strategies identified by the GIF PR and PP Evaluation Methodology (concealed diversion, concealed misuse, breakout, clandestine production in clandestine facilities) is

  1. Effects of one year treatment of sibutramine on insulin resistance parameters in type 2 diabetic patients.

    Science.gov (United States)

    Derosa, Giuseppe; Maffioli, Pamela; Ferrari, Ilaria; Palumbo, Ilaria; Randazzo, Sabrina; D'Angelo, Angela; Cicero, Arrigo F G

    2010-01-01

    Comparison of the effects of one year treatment with sibutramine compared to placebo on insulin resistance parameters, body weight, glycemic control, and lipid profile, in type 2 diabetic patients. Two hundred and forty-six patients with uncontrolled type 2 diabetes mellitus in therapy with different oral hypoglycemic agents or insulin were enrolled in this study and randomised to take sibutramine 10 mg or placebo for one year. We evaluated at baseline, and after 3, 6, 9, and 12 months these parameters: homeostasis model assessment insulin resistance index (HOMA-IR), retinol binding protein-4 (RBP-4), resistin, visfatin, and high sensitivity-C reactive protein (Hs-CRP), body weight, body mass index (BMI), glycated hemoglobin (HbA(₁c)), fasting plasma glucose (FPG), post-prandial plasma glucose (PPG), fasting plasma insulin (FPI), total cholesterol (TC), low density lipoprotein-cholesterol (LDL-C), high density lipoprotein-cholesterol (HDL-C), and triglycerides (T(g)). A faster decrease of HOMA-IR, resistin, and RBP-4 was recorded with sibutramine compared to the control group. We observed a significant decrease of Hs-CRP in both groups, and a faster improvement of HbA(₁c), FPG and PPG with sibutramine compared to the control group; furthermore we recorded a decrease of FPI, TC, LDL-C, body weight, and BMI in the sibutramine group, but not in the control group. Sibutramine gave a faster improvement of insulin resistance parameters and glycemic control compared to placebo; furthermore sibutramine gave also an improvement of lipid profile, and body weight.

  2. [Associations of insulin resistance and pancreatic beta-cell function with plasma glucose level in type 2 diabetes].

    Science.gov (United States)

    Nian, Xiaoping; Sun, Gaisheng; Dou, Chunmei; Hou, Hongbo; Fan, Xiuping; Yu, Hongmei; Ma, Ling; He, Bingxian

    2002-06-10

    To investigate the influence of insulin resistance and pancreatic beta-cell function on plasma glucose level in type 2 diabetes so as to provide theoretical basis for reasonable selection of hypoglycemic agents. The plasma non-specific insulin (NSINS), true insulin (TI) and glucose in eight-one type 2 diabetics, 38 males and 43 females, with a mean age of 53 years, were examined 0, 30, 60 and 120 minutes after they had 75 grams of instant noodles. The patients were divided into two groups according to their fasting plasma glucose (FPG): group A (FPG = 8.89 mmol/L). The insulin resistance was evaluated by HOMA-IR, the beta-cell function was evaluated by HOMA-beta formula and the formula deltaI(30)/deltaG(30) = (deltaI(30)-deltaI(0))/(deltaG(30)-deltaG(0)). The insulin area under curve (INSAUC) was evaluated by the formula INSAUC=FINS/2+INS(30)+INS(60)+INS(120)/2. The mean FPG was 6.23 mmol/L in group A and 12.6 mmol/L in group B. PG2H was 11.7 mmol/L in group A and 19.2 mmol/L in group B. The TI levels in group B at 0, 30, 60, 120 min during standard meal test were significantly higher than those in group A: 6.15 +/- 1.06 vs 4.77 +/- 1.06, 9.76 +/- 1.1 vs 5.88 +/- 1.1,14.68 +/- 1.11 vs 6.87 +/- 1.1 and 17.13 +/- 1.12 vs 8.0 +/- 1.1 microU/dl (all P< 0.01). The NSINS showed the same trend. The insulin resistance in group B was 1.5 times that in group A. With the insulin resistance adjusted, the beta cell function in group A was 5 to 6 times that in group B. The INSAUC in group A was 1.66 times larger than that in group B, especially the INSAUC for true insulin (2 times larger). The contribution of insulin resistance and beta cell function to PG2H was half by half in group A and 1:8 in group B. beta cell function calculated by insulin (Homa-beta) explained 41% of the plasma glucose changes in group A and 54% of the plasma glucose changes in group B. The contribution of insulin deficiency to plasma glocose was 3.3.times that of insulin resistance in group A and was 9

  3. 49 CFR Appendix E to Part 178 - Flame Penetration Resistance Test

    Science.gov (United States)

    2010-10-01

    ... testing are the Lenox Model OB-32, Carlin Model 200 CRD and Park Model DPL. (3) Calorimeter. (i) The calorimeter to be used in testing must be a total heat flux Foil Type Gardon Gage of an appropriate range... burner to be used in tesing must— (i) Be a modified gun type. (ii) Use a suitable nozzle and maintain...

  4. Design verification testing for fuel element type CAREM

    International Nuclear Information System (INIS)

    Martin Ghiselli, A.; Bonifacio Pulido, K.; Villabrille, G.; Rozembaum, I.

    2013-01-01

    The hydraulic and hydrodynamic characterization tests are part of the design verification process of a nuclear fuel element prototype and its components. These tests are performed in a low pressure and temperature facility. The tests requires the definition of the simulation parameters for setting the test conditions, the results evaluation to feedback mathematical models, extrapolated the results to reactor conditions and finally to decide the acceptability of the tested prototype. (author)

  5. Simple test of synergy between ampicillin and vancomycin for resistant strains of Enterococcus faecium.

    Science.gov (United States)

    Green, M; Barbadora, K; Wadowsky, R M

    1994-11-01

    The combination of ampicillin and vancomycin kills some but not all strains of ampicillin- and vancomycin-resistant Enterococcus faecium. We compared a simple test for synergy utilizing a commercially available microdilution susceptibility system with time-kill studies and determined acceptable breakpoints for this test for 20 strains of ampicillin- and vancomycin-resistant E. faecium. The combination of ampicillin and vancomycin was tested for synergy by time-kill, broth macrodilution, and broth microdilution procedures. Repeat testing of isolates by macro- and microdilution synergy methods yielded MICs that were within one twofold dilution of each other for both intra- and intertest comparisons. Synergy was always detected by time-kill studies when the MIC of ampicillin in the combination synergy screen was 16 micrograms/ml in the combination microdilution synergy screen. The determination of the synergy by the broth microdilution procedure appears to be simple, convenient, and accurate.

  6. Assessment of three cuban sites for testing resistance to sugarcane mosaic virus

    Directory of Open Access Journals (Sweden)

    Yaquelin Puchades

    2015-03-01

    Full Text Available Sugarcane mosaic disease is amongst the world’s most important diseases affecting sugarcane worldwide. The objective was to assess the environmental conditions of the sites where the test for SCMV resistance is done. Multi-environment trial Data were analyzed using a Principal Components Analysis Eighteen sugarcane genotypes s were evaluated from the main testing sites in Cuba (Jovellanos, Florida, Mayarí . The information of the climatic conditions was recorded at local weather stations. The assessment of the sites was done by analyzing the main components. Results showed that the testing sites were different from one another, and proved that the environment strongly influences on the mosaic symptom manifestation. PCA was an excellent procedure to assess the testing sites .for SCMV resistance.

  7. Numerical Analysis Of The Resistance To Pullout Test Of Clinched Assemblies Of Thin Metal Sheets

    International Nuclear Information System (INIS)

    Jomaa, Moez; Billardon, Rene

    2007-01-01

    This paper presents the finite element analysis of the resistance of a clinch point to pullout test -that follows the numerical analysis of the forming process of the point-. The simulations have been validated by comparison with experimental evidences. The influence on the numerical predictions of various computation and process parameters have been evaluated

  8. 16 CFR 1203.15 - Positional stability test (roll-off resistance).

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Positional stability test (roll-off resistance). 1203.15 Section 1203.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... over the helmet along the midsagittal plane and attaching the hook over the edge of the helmet as shown...

  9. Integration of HIV testing in tuberculosis drug resistance surveillance in Kazakhstan and Kenya

    NARCIS (Netherlands)

    Klinkenberg, E.; van den Hof, S.; Tursynbayeva, A.; Kipruto, H.; Wahogo, J.; Pak, S.; Kutwa, A.; L'Herminez, R.

    2012-01-01

    In Kenya and Kazakhstan, integration of human immunodeficiency virus (HIV) testing results into the routine surveillance of multidrug-resistant tuberculosis (MDR-TB) proved feasible and useful. The integration process improved overall data quality and data validation capacity, and integrated data

  10. Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.

    Energy Technology Data Exchange (ETDEWEB)

    Quarles, Stephen, L.; Sindelar, Melissa

    2011-12-13

    The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.

  11. Intestinal transport and fermentation of resistant starch evaluated by the hydrogen breath test

    DEFF Research Database (Denmark)

    Olesen, M; Rumessen, J J; Gudmand-Høyer, E

    1994-01-01

    To study fermentability of different samples of resistant starch (RS), compared to one another and to lactulose, and to study the effect on gastric emptying of addition of RS to test meal. Finally to study if adaptation to RS results in a measurable change in fermentation pattern, (H2/CH4...

  12. Ringtest to evaluate four methods of resistance testing in fodder radish against Meloidogyne chitwoodi

    NARCIS (Netherlands)

    Visser, J.H.M.; Berg, van den W.; Korthals, G.W.

    2009-01-01

    To measure levels of resistance in fodder radish cultivars a reliable, objective and cost effective testing method is required. In 2006 German and Dutch plant breeder’s organizations (Bundesverband Deutscher Pflanzenzüchter; BDP and Plantum), a number of research institutes (PRI, PPO (WUR) and JKI)

  13. Reflection-type long period grating biosensor for the detection of drug resistant bacteria: The Opto-bacteria Project

    Science.gov (United States)

    Consales, M.; Quero, G.; Zuppolini, S.; Sansone, L.; Borriello, A.; Giordano, M.; Venturelli, A.; Cusano, A.

    2014-05-01

    We report on the development of a multilayer coated reflection-type long period fiber grating (LPG) biosensor, useful for the detection of antibiotic resistance bacteria. A standard LPG is first transformed in a more practical probe working in reflection mode, then it is coated by a primary layer of aPS and a secondary layer of PMMA in order to increase its surrounding refractive index sensitivity and at the same time provide the necessary conditions for a correct biofunctionalization. Standard linkage chemistry has been applied to anchor the bioreceptors on the probe surface. We show some preliminary results demonstrating the capability of our LPG biosensor to successfully monitor all the biological steps of the biomolecular experiments, including β-lactamase binding detection tests.

  14. Positive effects of football on fitness, lipid profile, and insulin resistance in Brazilian patients with type 2 diabetes

    DEFF Research Database (Denmark)

    de Sousa, M V; Fukui, R; Krustrup, Peter

    2014-01-01

    We evaluated the effects of recreational football training combined with calorie-restricted diet (football + diet) vs calorie-restricted diet alone (diet) on aerobic fitness, lipid profile, and insulin resistance indicators in type 2 diabetes (T2D) patients. Forty-four T2D patients aged 48-68 years...... (27 females, 17 males) were randomly allocated to the football + diet group (FDG; n = 22) or to the diet group (DG; n = 22), of whom 19 FDG and 15 DG subjects completed the study. The football training was performed for 3 × 40 min/week for 12 weeks. Dual-energy X-ray absorptiometry scanning, treadmill...... testing, and fasting blood samplings were performed pre and post-intervention. After 12 weeks, maximal oxygen uptake (VO2max ) was elevated (P 

  15. Role of T-type calcium channels in myogenic tone of skeletal muscle resistance arteries

    DEFF Research Database (Denmark)

    VanBavel, Ed; Sorop, Oana; Andreasen, Ditte

    2002-01-01

    T-type calcium channels may be involved in the maintenance of myogenic tone. We tested their role in isolated rat cremaster arterioles obtained after CO(2) anesthesia and decapitation. Total RNA was analyzed by RT-PCR and Southern blotting for calcium channel expression. We observed expression...... of voltage-operated calcium (Ca(V)) channels Ca(V)3.1 (T-type), Ca(V)3.2 (T-type), and Ca(V)1.2 (L-type) in cremaster arterioles (n = 3 rats). Amplification products were observed only in the presence of reverse transcriptase and cDNA. Concentration-response curves of the relatively specific L-type blocker......); K(+) -5.4 +/- 0.3 (n = 4); all log(IC(50)) P maintenance of myogenic tone in rat cremaster muscle arterioles....

  16. Electrical resistivity monitoring of the thermomechanical heater test in Yucca Mountain

    International Nuclear Information System (INIS)

    Ramirez, A.; Daily, W.; Buettner, M.

    1997-01-01

    A test is being conducted in the densely welded Topopah Springs tuff within Yucca Mountain, Nevada to study the thermomechanical and hydrological behavior of this horizon when it is headed. A single 4 kW heater, placed in a horizontal borehole, was turned on August, 1996 and will continue to heat the rockmass until April 1997. Of the several thermal, mechanical and hydrological measurements being used to monitor the rockmass response, electrical resistance tomography (ERT) is being used to monitor the movement of liquid water with a special interest in the movement of condensate out of the system. Four boreholes, containing a total of 30 ERT electrodes, were drilled to form the sides of a 30 foot square with the heater at the center and perpendicular to the plane. Images of resistivity change were calculated using data collected before and during the heating episode. The changes recovered show a region of decreasing resistivity approximately centered around the heater. The size this region grows with time and the resistivity decreases become stronger. The changes in resistivity are caused by both temperature and saturation changes. The observed resistivity changes suggest that the rock adjacent to the heater dries as heating progresses. This dry region is surrounded by a region of increased saturation where steam recondenses and imbibes into the rock

  17. Electrical resistivity monitoring of the thermomechanical heater test in Yucca Mountain

    International Nuclear Information System (INIS)

    Ramirez, A.; Daily, W.; Buettner, M.; LaBrecque, L

    1996-01-01

    A test is being conducted in the densely welded Topopah Springs tuff within Yucca Mountain, Nevada to study the thermomechanical and hydrological behavior of this horizon when it is heated. A single 4 kW heater, placed in a horizontal borehole, was turned on August, 1996 and will continue to heat the rockmass until April 1997. Of the several thermal, mechanical and hydrological measurements being used to monitor the rockmass response, electrical resistance tomography (ERT) is being used to monitor the movement of liquid water with a special interest in the movement of condensate out of the system. Four boreholes, containing a total of 30 ERT electrodes, were drilled to form the sides of a 30 foot square with the heater at the center and perpendicular to the plane. Images of resistivity change were calculated using data collected before and during the heating episode. The changes recovered show a region of decreasing resistivity approximately centered around the heater. The size this region grows with time and -the resistivity decreases become stronger. The changes in resistivity are caused by both temperature and saturation changes. The observed resistivity changes suggest that the rock adjacent to the heater dries as heating progresses. This dry region is surrounded by a region of increased saturation where steam recondenses and imbibes into the rock

  18. Automatic monitoring of radial injection tracer tests using a novel multi-electrode resistivity system

    International Nuclear Information System (INIS)

    Ward, R.S.; Sen, M.A.; Williams, G.M.; Jackson, P.D.

    1990-01-01

    A radial injection tracer test has been carried out in an unconfined fluvial sand and gravel aquifer underlain by low permeability clay. Sodium chloride has been used as an electrolyte tracer and breakthrough has been monitored using a newly developed automatic resistivity system (RESCAN) incorporating six fully penetrating resistivity probes each having 80 electrodes spaced at 5 cm intervals along their length. Each electrode is individually addressable under computer control to either carry current or measure potential. Any four electrodes can be selected in the traditional Wenner configuration to measure formation resistivity. Rapid measurement of changes in resistivity allows a very detailed picture of tracer migration to be obtained. The resistivity probes were placed at 1 and 2 m radii from the central fully-screened tracer injection well along three limbs at 120 degrees. Resistivity measurements were compared with adjacent multi-level samplers. An 8 x 8 m grid of 140 surface electrodes centred on the central well was also installed. The resistivity profiles measured prior to tracer injection were used to infer lithology, particularly layering. Detailed breakthrough curves were obtained at 77 positions along each of the six probes and compared with adjacent multi-level sampler breakthrough curves. The results showed that the aquifer was extremely heterogeneous even on this small scale. Because the system operates automatically without the need to extract and analyse large numbers of water samples, it opens up the possibility of carrying out lots of small scale injection tests within a larger domain likely to be invaded by a tracer or pollution plume. Such detailed information for determining aquifer properties can provide the data set necessary for characterisation of the aquifer to predict dispersion parameters appropriate to the large scale. (Author) (6 refs., 9 figs., 2 tabs.)

  19. Evaluating a protocol for testing fire-resistant oil-spill containment boom

    International Nuclear Information System (INIS)

    Walton, W.D.; Twilley, W.H.; Hiltabrand, R.R.; Mullin, J.V.

    1998-01-01

    A series of experiments were conducted to evaluate a protocol for testing the ability of fire-resistant booms to withstand both fire and waves. Most response plans for in situ burning of oil at sea require the use of a fire-resistant boom to contain the oil during a burn. For this study, a wave tank was designed and constructed to assess the capabilities of a 15 m section of a boom subjected to a 5 m diameter fire with 0.15 m high waves. Five typical fire-resistant oil-spill containment booms were tested. The purpose of the project was to evaluate the test procedure, therefore the overall performance of the boom was not evaluated on a pass-fail criterion. The two most important aspects of the test method were repeatability and reproducibility. Some of the parameters tested included the effect of wind, waves, fire size, and fire duration. Methods to constrain the booms were also tested. 7 refs., 6 tabs., 7 figs

  20. In vivo emergence of vicriviroc resistance in a human immunodeficiency virus type 1 subtype C-infected subject.

    Science.gov (United States)

    Tsibris, Athe M N; Sagar, Manish; Gulick, Roy M; Su, Zhaohui; Hughes, Michael; Greaves, Wayne; Subramanian, Mani; Flexner, Charles; Giguel, Françoise; Leopold, Kay E; Coakley, Eoin; Kuritzkes, Daniel R

    2008-08-01

    Little is known about the in vivo development of resistance to human immunodeficiency virus type 1 (HIV-1) CCR5 antagonists. We studied 29 subjects with virologic failure from a phase IIb study of the CCR5 antagonist vicriviroc (VCV) and identified one individual with HIV-1 subtype C who developed VCV resistance. Studies with chimeric envelopes demonstrated that changes within the V3 loop were sufficient to confer VCV resistance. Resistant virus showed VCV-enhanced replication, cross-resistance to another CCR5 antagonist, TAK779, and increased sensitivity to aminooxypentane-RANTES and the CCR5 monoclonal antibody HGS004. Pretreatment V3 loop sequences reemerged following VCV discontinuation, implying that VCV resistance has associated fitness costs.

  1. Expression of the central obesity and Type 2 Diabetes mellitus genes is associated with insulin resistance in young obese children.

    Science.gov (United States)

    Skoczen, S; Wojcik, M; Fijorek, K; Siedlar, M; Starzyk, J B

    2015-04-01

    The assessment of the health consequences associated with obesity in young children is challenging. The aims of this study were: (1) to compare insulin resistance indices derived from OGTT in obese patients and healthy control (2) to analyze central obesity and Type 2 Diabetes genes expression in obese children, with special attention to the youngest group (10 years old). The study included 49 children with obesity (median age 13.5 years old), and 25 healthy peers. Biochemical blood tests and expression of 11 central obesity and 33 Type 2 Diabetes genes was assessed. A significant difference in insulin resistance between obese and non-obese adolescents was observed in all studied indices (mean values of the insulin levels: 24.9 vs. 9.71 mIU/L in T0, 128 vs. 54.7 mIU/L in T60 and 98.7 vs. 41.1 mIU/L in T120 respectively; AUC: 217 vs. 77.2 ng/ml*h, mean values of B% (state beta cell function), S% (insulin sensitivity), and IR were 255 (±97) vs. 135 (±37.8), 46.6 (±37.3) vs. 84.2 (±29.6) and 3 (±1.55) vs. 1.36 (±0,56); HIS, WBIS and ISIBel median 3.89, 44.7, 0.73 vs. 8.57, 110, 2.25. All comparisons differed significantly p1). Moreover, insulin sensitivity was significantly better in the older obese group (>10 years old): median AUC 239 vs. 104 ng/ml*h, and HIS, WBIS and ISIBel 3.57, 38, 0.67 vs. 6.23, 75.6, 1.87 respectively in the obese older compared to the obese younger subgroup, pobesity genes and 70% of Type 2 Diabetes genes was higher in the obese compared to control groups. The differences were more pronounced in the younger obese group. Insulin resistance may develop in early stage of childhood obesity and in very young children may be associated with higher expression of the central obesity and Type 2 Diabetes genes. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Prevalence, PFGE typing, and antibiotic resistance of Bacillus cereus group isolated from food in Morocco.

    Science.gov (United States)

    Merzougui, Souad; Lkhider, Mustapha; Grosset, Noel; Gautier, Michel; Cohen, Nozha

    2014-02-01

    This article reports the prevalence and antibiotic resistance of the Bacillus cereus group isolated from different foods (milk and dairy products, spices, and rice salad) in Morocco. In total, 402 different food samples collected from 2008 to 2010 were analyzed by microbiological methods to isolate B. cereus. The strains were subjected to a polymerase chain reaction test in order to verify whether they belonged to the B. cereus group. Sixty-four of all isolates (15.9%) were found to be positive. Among the sources, B. cereus strains from milk and dairy products constituted the largest proportion of isolates (33/64; 51.6%) followed by spices (22/64; 34.4%) and salad with rice (9/64; 14.1%). The genetic diversity of the strains of B. cereus group was examined by pulsed-field gel electrophoresis (PFGE) of chromosomal DNA digested with SmaI. The enzyme restriction profiles showed a high degree of polymorphism among the strains. The results showed that PFGE analysis could reveal the genetic differences among B. cereus strains. Investigation of antibiotic-resistance profiles showed that isolates were resistant to ampicillin (98.4%), tetracycline (90.6%), oxacillin (100%), cefepime (100%), and penicillin (100%), and were susceptible to chloramphenicol (67.2%), erythromycin (84.4%), and gentamicin (100%). The results of this study indicated that B. cereus could be a significant etiological agent of food poisoning in Morocco because of its high prevalence. Also, we demonstrated that the majority of strains came from milk and dairy products. However, additional research involving cytotoxicity tests is needed to more evaluate this sanitary risk.

  3. The combined use of test reactor experiments and power reactor tests for the development of PCI-resistant fuel

    International Nuclear Information System (INIS)

    Junkrans, S.; Vesterlund, G.; Vaernild, O.

    1980-01-01

    The theme of this paper is that for development of PCI-resistant fuel acceptable from the commercial and licensing aspects, extensive and time-consuming work is needed both in a test reactor and in power reactors. The test reactor is necessary for ramp testing to power levels not allowed in power reactors and with the aim of generating fuel failures. It is also used for other special irradiation experiments. The access to power reactors is necessary to generate information on performance in a real LWR core and to incubate at a reasonable cost the large amount of rods required for test reactor ramping. Selected results from the ASEA-ATOM work are used to support these conclusions. (author)

  4. Ductile Tearing Resistance Indexing of Automotive Grade DP 590 Steel Sheets: EWF Testing Using DENT Specimens

    Science.gov (United States)

    Sahoo, Subhadra; Padmapriya, N.; De, Partha Sarathi; Chakraborti, P. C.; Ray, S. K.

    2018-03-01

    The essential work of fracture (EWF) method has been explored for indexing the ductile tearing resistance of DP 590 automotive grade dual-phase steel sheet both in longitudinal (L-T) and transverse (T-L) orientations. The simplest possible test and analysis procedures have been adopted. The EWF method is found to be eminently suitable for routine quality control and product development purposes for such materials. Areas for further research for improving the experimental strategy are highlighted. For the investigated steel sheet, the estimated tearing resistance is found to be distinctly higher for the L-T orientation compared to the T-L orientation; the reason thereof merits further investigation.

  5. Electrochemical testing of passivity state and corrosion resistance of supermartensitic stainless steels

    Directory of Open Access Journals (Sweden)

    S. Lasek

    2010-01-01

    Full Text Available On low interstitial - supermartensitic stainless steels (X1CrNiMo 12-5-1, X2CrNiMo 13-6-2, X1CrNiMo 12-6-2 the electrochemical potentiodynamic polarization tests were carried out and the passive state stability and localized corrosion resistance were compared and evaluated. The effect of quenching and tempering as well as the changes in microstructure on polarisation curves and corrosion properties at room temperature were established. Small differences in chemical composition of steels were also registered on their corrosion parameters changes and resistance.

  6. Hepatitis C Virus Resistance Testing in Genotype 1: The Changing Role in Clinical Utility.

    Science.gov (United States)

    Molino, Suzanne; Martin, Michelle T

    2017-09-01

    To review the role and utility of baseline resistance testing with currently available and pipeline genotype 1 hepatitis C virus (HCV) treatment. Authors reviewed liver meeting abstracts for data on currently-available and pipeline genotype 1 retreatment regimens from January 1, 2015, to March 23, 2017. Additional trials were identified from a review of clinicaltrials.gov using the pipeline medication names. Authors identified reports of current and pipeline genotype 1 retreatment regimens. Seven references were clinical study results presented at the meetings of the American Association for the Study of Liver Diseases and the European Association for the Study of the Liver, and 2 studies were from clinicaltrials.gov . Retreatment trial data of currently available salvage regimens indicate that baseline NS5A resistance-associated substitutions (RASs) may decrease sustained virological response (SVR) rates when retreating with ledipasvir/sofosbuvir but are not affected when using elbasvir/grazoprevir + sofosbuvir + ribavirin, paritaprevir/ritonavir/ombitasvir + dasabuvir + sofosbuvir, or sofosbuvir/velpatasvir + ribavirin. Pipeline data indicate that baseline NS5A RASs do not affect SVR rates when retreating with sofosbuvir/velpatasvir/voxilaprevir or glecaprevir/pibrentasvir. Baseline resistance testing was used for decisional support for 3 clinical scenarios in patients with HCV genotype 1 infection at the time of manuscript submission. Pending the approval of 2 new direct-acting antiviral regimens in the third quarter of 2017, the rapidly evolving HCV treatment guidelines will likely reflect a decreased clinical utility for resistance testing.

  7. Antiviral therapy of hepatitis C in 2014: do we need resistance testing?

    Science.gov (United States)

    Schneider, Maximilian David; Sarrazin, Christoph

    2014-05-01

    The treatment of chronic hepatitis C has fundamentally changed since the approval of the first direct-acting antivirals (DAA) in 2011. In addition to telaprevir and boceprevir, in 2014 two new NS3 protease inhibitors (simeprevir and faldaprevir), one non-nucleoside polymerase inhibitor (sofosbuvir) and one NS5a replication complex inhibitor (daclatasvir) have expanded the treatment options for chronic hepatitis C. Resistance-associated variants (RAV) are naturally produced during the HCV life cycle. The frequency of RAVs within HCV quasispecies mainly depends on their replicational fitness. Variants conferring resistance to nucleos(t)ide analogues have not been detected, and the majority of NS3 protease-resistant variants are present at low frequencies (0.1-3%) before initiation of DAA-based therapies. However, the Q80K variant conferring resistance to simeprevir has been observed in 9-48% of untreated HCV genotype 1a-infected patients, leading to reduced SVR rates. Resistant variants are detectable in the majority of patients with treatment failure to NS3 protease inhibitor- or NS5a inhibitor-based antiviral therapy. Long-term follow-up studies by population-based sequence analysis have shown the disappearance of resistant variants in the majority of patients, with median times to loss of mutations of 4-64weeks. For the nucleotide analogue sofosbuvir, the emergence of the S282T resistant variant has been observed only in single patients, with reversion to wild-type within several weeks. Data are sparse on retreatment of patients with the same DAA or the same class of DAAs. However, retreatment with a different class of DAAs after failure of NS3 protease inhibitor-based therapy has been successful in small studies. This article forms part of a symposium in Antiviral Research on "Hepatitis C: next steps toward global eradication." Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Salmonella Typhimurium ST213 is associated with two types of IncA/C plasmids carrying multiple resistance determinants.

    Science.gov (United States)

    Wiesner, Magdalena; Calva, Edmundo; Fernández-Mora, Marcos; Cevallos, Miguel A; Campos, Freddy; Zaidi, Mussaret B; Silva, Claudia

    2011-01-11

    Salmonella Typhimurium ST213 was first detected in the Mexican Typhimurium population in 2001. It is associated with a multi-drug resistance phenotype and a plasmid-borne blaCMY-2 gene conferring resistance to extended-spectrum cephalosporins. The objective of the current study was to examine the association between the ST213 genotype and blaCMY-2 plasmids. The blaCMY-2 gene was carried by an IncA/C plasmid. ST213 strains lacking the blaCMY-2 gene carried a different IncA/C plasmid. PCR analysis of seven DNA regions distributed throughout the plasmids showed that these IncA/C plasmids were related, but the presence and absence of DNA stretches produced two divergent types I and II. A class 1 integron (dfrA12, orfF and aadA2) was detected in most of the type I plasmids. Type I contained all the plasmids carrying the blaCMY-2 gene and a subset of plasmids lacking blaCMY-2. Type II included all of the remaining blaCMY-2-negative plasmids. A sequence comparison of the seven DNA regions showed that both types were closely related to IncA/C plasmids found in Escherichia, Salmonella, Yersinia, Photobacterium, Vibrio and Aeromonas. Analysis of our Typhimurium strains showed that the region containing the blaCMY-2 gene is inserted between traA and traC as a single copy, like in the E. coli plasmid pAR060302. The floR allele was identical to that of Newport pSN254, suggesting a mosaic pattern of ancestry with plasmids from other Salmonella serovars and E. coli. Only one of the tested strains was able to conjugate the IncA/C plasmid at very low frequencies (10-7 to 10-9). The lack of conjugation ability of our IncA/C plasmids agrees with the clonal dissemination trend suggested by the chromosomal backgrounds and plasmid pattern associations. The ecological success of the newly emerging Typhimurium ST213 genotype in Mexico may be related to the carriage of IncA/C plasmids. We conclude that types I and II of IncA/C plasmids originated from a common ancestor and that the

  9. Molecular characteristics of methicillin-resistant Staphylococcus aureus (MRSA) strains isolated from patients with bacteremia based on MLST, SCCmec, spa, and agr locus types analysis.

    Science.gov (United States)

    Goudarzi, Mehdi; Seyedjavadi, Sima Sadat; Nasiri, Mohammad Javad; Goudarzi, Hossein; Sajadi Nia, Raheleh; Dabiri, Hossein

    2017-03-01

    The widespread emergence of methicillin resistant Staphylococcus aureus, as a common cause of nosocomial infections, is becoming a serious concern in global public health. The objective of the present study was to investigate antimicrobial susceptibility pattern, frequency of virulence genes and molecular characteristics of methicillin-resistant Staphylococcus aureus strains isolated from patients with bacteremia. A total of 128 methicillin-resistant Staphylococcus aureus isolates were collected during February 2015 to January 2016. In vitro antimicrobial susceptibility of the isolates was assessed using the disk diffusion method. Conventional PCR was performed for the detection of adhesion (can, bbp, ebp, fnbB, fnbA, clfB, clfA) and toxin (etb, eta, pvl, tst) encoding genes, determining the agr type, SCCmec, MLST and spa typing of the isolates. All the methicillin-resistant Staphylococcus aureus isolates were found to be sensitive to linezolid, teicoplanin, and vancomycin. Resistance to the tested antibiotics varied from 97.7% for penicillin to 24.2% for mupirocin. The rate of multi drug resistance (MDR) in the present study was 97.7%. The most commonly detected toxin and adhesion genes were tst (58.6%), and clfB (100%), respectively. The majority of SCCmec III isolates were found in agr group I while SCCmec IV and II isolates were distributed among agr group III. Multilocus Sequence Typing (MLST) of the MRSA isolates showed five different sequence types: ST239 (43%), ST22 (39.8%), ST585 (10.9%), ST45 (3.9%) and ST240 (2.3%). All of the pvl positive strains belonged to ST22-SCCmec IV/t790 clone and were MDR. Among different 7 spa types, the most common were t790 (27.3%), t037 (21.9%), and t030 (14.1%). spa types t016, t924 and spa type t383 were reported for the first time from Asia and Iran, respectively. It was shown that spa types circulating in the studied hospitals varied which support the need to perform future surveillance studies in order to understand

  10. Validation and Verification (V and V) Testing on Midscale Flame Resistant (FR) Test Method

    Science.gov (United States)

    2016-12-16

    materials . The results demonstrated that the Midscale test is a quick and cost-effective method for evaluation of FR performance of design features...standard and novel FR materials and design configurations during fire engulfment. Details of the test method and its development can be found in the...employed in the FRACU is a ripstop fabric blend of 65% FR rayon, 25% para- aramid and 10% nylon. The iCVC material is Nylon/Cotton/Nomex. All three

  11. Subtyping of Chilean Methicillin-Resistant Staphylococcus aureus strains carrying the staphylococcal cassette chromosome mec type I

    Directory of Open Access Journals (Sweden)

    Gustavo Medina

    2012-09-01

    Full Text Available The cassette chromosome mec (SCCmec present in methicillin-resistant Staphylococcus aureus (MRSA has two essential components, the ccr gene complex and the mec gene complex. Additionally, SCCmec has non-essential components called J regions which are used for MRSA subtyping. This study was performed to determine subtypes MRSA strains carrying SCCmec type I based on polymorphism of regions located downstream of the mecA gene. A total of 98 MRSA strains carrying SCCmec type I isolated from patients hospitalized at the County Hospital of Valdivia (Chile between May 2007 and May 2008, were analyzed by multiplex PCR designed to amplify the mecA gene and 7 DNA hypervariable regions located around the mecA gene. MRSA strains were classified into seventeen genotypes accordingly to amplification patterns of DNA hypervariable regions. Five genotypes showed amplification patterns previously described. The remaining twelve genotypes showed new amplification patterns. Genotypes 18 and Genotype 19 were the most frequently detected. Regions HVR, Ins117 and pI258 stand out as being present in more than 60% of tested isolates. The acquisition of hypervariable regions by MRSA is a continuous horizontal transfer process through which the SCCmec have been preserved intact, or even may give rise to new types and subtypes of SCCmec. Therefore it is possible to infer that most MRSA strains isolated at the County Hospital of Valdivia (Chile were originated from two local clones which correspond to Genotype 18 and Genotype 19.

  12. Performance-based improvement of the leakage rate test program for the reactor containment of HTTR. Adoption of revised test programs containing 'Type A, Type B and Type C tests'

    International Nuclear Information System (INIS)

    Kondo, Masaaki; Emori, Koichi; Sekita, Kenji; Furusawa, Takayuki; Hayakawa, Masato; Kozawa, Takayuki; Aono, Tetsuya; Kuroha, Misao; Ouchi, Hiroshi; Kimishima, Satoru

    2008-10-01

    The reactor containment of HTTR is periodically tested to confirm leak-tight integrity by conducting overall integrated leakage rate tests, so-called 'Type A tests,' in accordance with a standard testing method provided in Japan Electric Association Code (JEAC) 4203. 'Type A test' is identified as a basic one for measuring whole leakage rates for reactor containments, it takes, however, much of cost and time of preparation, implementation and restoration of itself. Therefore, in order to upgrade the maintenance technology of HTTR, the containment leakage rate test program for HTTR was revised by adopting efficient and economical alternatives including Type B and Type C tests' which intend to measure leakage rates for containment penetrations and isolation valves, respectively. In JEAC4203-2004, following requirements are specified for adopting an alternative program: upward trend of the overall integrated leakage rate due to aging affection should not be recognized; performance criterion for combined leakage rate, that is a summation of local leakage rates evaluated by Type B and Type C tests and converted to whole leakage rates, should be established; the criterion of the combined leakage rate should be satisfied as well as of the overall integrated leakage rate; correlation between the overall integrated and combined leakage rates should be recognized. Considering the historical performances, policies of conforming to the forgoing requirements and of carrying out the revised test program were developed, which were accepted by the regulatory agency. This report presents an outline of the leakage rate tests for the reactor containment of HTTR, identifies practical issues of conventional Type A tests, and describes the conforming and implementing policies mentioned above. (author)

  13. Effect of thermal treatment on the corrosion resistance of Type 316L stainless steel exposed in supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Jiao, Y. [Department of Materials Science & Engineering, McMaster University, Hamilton, ON (Canada); Zheng, W. [CanmetMATERIALS, Natural Resources Canada, Hamilton, ON (Canada); Guzonas, D.A. [Canadian Nuclear Laboratories Chalk River Laboratories, ON (Canada); Cook, W.G. [Department of Chemical Engineering, University of New Brunswick, Fredericton, NB (Canada); Kish, J.R., E-mail: kishjr@mcmaster.ca [Department of Materials Science & Engineering, McMaster University, Hamilton, ON (Canada)

    2015-09-15

    There are still unknown aspects about the growth mechanism of oxide scales formed on candidate stainless steel fuel cladding materials during exposure in supercritical water (SCW) under the conditions relevant to the Canadian supercritical water-cooled reactor (SCWR). The tendency for intermetallic precipitates to form within the grains and on grain boundaries during prolonged exposure at high temperatures represents an unknown factor to corrosion resistance, since they tend to bind alloyed Cr. The objective of this study was to better understand the extent to which intermetallic precipitates affects the mode and extent of corrosion in SCW. Type 316L stainless steel, used as a model Fe–Cr–Ni–Mo alloy, was exposed to 25 MPa SCW at 550 °C for 500 h in a static autoclave for this purpose. Mechanically-abraded samples were tested in the mill-annealed (MA) and a thermally-treated (TT) condition. The thermal treatment was conducted at 815 °C for 1000 h to precipitate the carbide (M{sub 23}C{sub 6}), chi (χ), laves (η) and sigma (σ) phases. It was found that although relatively large intermetallic precipitates formed at the scale/alloy interface locally affected the oxide scale formation, their discontinuous formation did not affect the short-term overall apparent corrosion resistance.

  14. Effect of thermal treatment on the corrosion resistance of Type 316L stainless steel exposed in supercritical water

    Science.gov (United States)

    Jiao, Y.; Zheng, W.; Guzonas, D. A.; Cook, W. G.; Kish, J. R.

    2015-09-01

    There are still unknown aspects about the growth mechanism of oxide scales formed on candidate stainless steel fuel cladding materials during exposure in supercritical water (SCW) under the conditions relevant to the Canadian supercritical water-cooled reactor (SCWR). The tendency for intermetallic precipitates to form within the grains and on grain boundaries during prolonged exposure at high temperatures represents an unknown factor to corrosion resistance, since they tend to bind alloyed Cr. The objective of this study was to better understand the extent to which intermetallic precipitates affects the mode and extent of corrosion in SCW. Type 316L stainless steel, used as a model Fe-Cr-Ni-Mo alloy, was exposed to 25 MPa SCW at 550 °C for 500 h in a static autoclave for this purpose. Mechanically-abraded samples were tested in the mill-annealed (MA) and a thermally-treated (TT) condition. The thermal treatment was conducted at 815 °C for 1000 h to precipitate the carbide (M23C6), chi (χ), laves (η) and sigma (σ) phases. It was found that although relatively large intermetallic precipitates formed at the scale/alloy interface locally affected the oxide scale formation, their discontinuous formation did not affect the short-term overall apparent corrosion resistance.

  15. Fracture Resistance of Lithium Disilicate Ceramics Bonded to Enamel or Dentin Using Different Resin Cement Types and Film Thicknesses.

    Science.gov (United States)

    Rojpaibool, Thitithorn; Leevailoj, Chalermpol

    2017-02-01

    To investigate the influence of cement film thickness, cement type, and substrate (enamel or dentin) on ceramic fracture resistance. One hundred extracted human third molars were polished to obtain 50 enamel and 50 dentin specimens. The specimens were cemented to 1-mm-thick lithium disilicate ceramic plates with different cement film thicknesses (100 and 300 μm) using metal strips as spacers. The cements used were etch-and-rinse (RelyX Ultimate) and self-adhesive (RelyX U200) resin cements. Compressive load was applied on the ceramic plates using a universal testing machine, and fracture loads were recorded in Newtons (N). Statistical analysis was performed by multiple regression (p enamel showed the highest mean fracture load (MFL; 1591 ± 172.59 N). The RelyX Ultimate groups MFLs were significantly higher than the corresponding RelyX U200 groups (p enamel (p enamel. Reduced resin film thickness could reduce lithium disilicate restoration fracture. Etch-and-rinse resin cements are recommended for cementing on either enamel or dentin, compared with self-adhesive resin cement, for improved fracture resistance. © 2015 by the American College of Prosthodontists.

  16. Determination of Heritage SSME Pogo Suppressor Resistance and Inertance from Waterflow Pulse Testing

    Science.gov (United States)

    McDougal, Chris; Eberhart, Chad; Lee, Erik

    2016-01-01

    Waterflow tests of a heritage Space Shuttle Main Engine pogo suppressor were performed to experimentally quantify the resistance and inertance provided by the suppressor. Measurements of dynamic pressure and flow rate in response to pulsing flow were made throughout the test loop. A unique system identification methodology combined all sensor measurements with a one-dimensional perturbational flow model of the complete water flow loop to spatially translate physical measurements to the device under test. Multiple techniques were then employed to extract the effective resistance and inertance for the pogo suppressor. Parameters such as steady flow rate, perturbational flow rate magnitude, and pulse frequency were investigated to assess their influence on the behavior of the pogo suppressor dynamic response. These results support validation of the RS-25 pogo suppressor performance for use on the Space Launch System Core Stage.

  17. Monitoring the ground water level change during the pump test by using the Electric resistivity tomography

    Science.gov (United States)

    Hsu, H.; Chang, P. Y.; Yao, H. J.

    2017-12-01

    For hydrodynamics study of the unconfined aquifer in gravel formation, a pumping test was established to estimate the hydraulic conductivity in the midstream of Zhoushui River in Taiwan. The hydraulic parameters and the cone of depression could be estimated by monitoring the groundwater drawdown in an observation well which was in a short distance far from the pumping well. In this study we carried out the electric resistivity image monitoring during the whole pumping test. The electric resistivity data was measured with the surface and downhole electrodes which would produce a clear subsurface image of groundwater level through a larger distance than the distance between pumping and observation wells. The 2D electric image could also describe how a cone of depression truly created at subsurface. The continuous records could also show the change of groundwater level during the whole pumping test which could give a larger scale of the hydraulic parameters.

  18. 49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Additional tests for Type A packagings designed...) Materials § 173.466 Additional tests for Type A packagings designed for liquids and gases. (a) In addition to the tests prescribed in § 173.465, Type A packagings designed for liquids and gases must be...

  19. Orthodontic brackets removal under shear and tensile bond strength resistance tests - a comparative test between light sources

    Science.gov (United States)

    Silva, P. C. G.; Porto-Neto, S. T.; Lizarelli, R. F. Z.; Bagnato, V. S.

    2008-03-01

    We have investigated if a new LEDs system has enough efficient energy to promote efficient shear and tensile bonding strength resistance under standardized tests. LEDs 470 ± 10 nm can be used to photocure composite during bracket fixation. Advantages considering resistance to tensile and shear bonding strength when these systems were used are necessary to justify their clinical use. Forty eight human extracted premolars teeth and two light sources were selected, one halogen lamp and a LEDs system. Brackets for premolar were bonded through composite resin. Samples were submitted to standardized tests. A comparison between used sources under shear bonding strength test, obtained similar results; however, tensile bonding test showed distinct results: a statistical difference at a level of 1% between exposure times (40 and 60 seconds) and even to an interaction between light source and exposure time. The best result was obtained with halogen lamp use by 60 seconds, even during re-bonding; however LEDs system can be used for bonding and re-bonding brackets if power density could be increased.

  20. Orthodontic brackets removal under shear and tensile bond strength resistance tests – a comparative test between light sources

    International Nuclear Information System (INIS)

    Silva, P C G; Porto-Neto, S T; Lizarelli, R F Z; Bagnato, V S

    2008-01-01

    We have investigated if a new LEDs system has enough efficient energy to promote efficient shear and tensile bonding strength resistance under standardized tests. LEDs 470 ± 10 nm can be used to photocure composite during bracket fixation. Advantages considering resistance to tensile and shear bonding strength when these systems were used are necessary to justify their clinical use. Forty eight human extracted premolars teeth and two light sources were selected, one halogen lamp and a LEDs system. Brackets for premolar were bonded through composite resin. Samples were submitted to standardized tests. A comparison between used sources under shear bonding strength test, obtained similar results; however, tensile bonding test showed distinct results: a statistical difference at a level of 1% between exposure times (40 and 60 seconds) and even to an interaction between light source and exposure time. The best result was obtained with halogen lamp use by 60 seconds, even during re-bonding; however LEDs system can be used for bonding and re-bonding brackets if power density could be increased

  1. Circuit Analysis of a Drosophila Dopamine Type 2 Receptor That Supports Anesthesia-Resistant Memory.

    Science.gov (United States)

    Scholz-Kornehl, Sabrina; Schwärzel, Martin

    2016-07-27

    Dopamine is central to reinforcement processing and exerts this function in species ranging from humans to fruit flies. It can do so via two different types of receptors (i.e., D1 or D2) that mediate either augmentation or abatement of cellular cAMP levels. Whereas D1 receptors are known to contribute to Drosophila aversive odor learning per se, we here show that D2 receptors are specific for support of a consolidated form of odor memory known as anesthesia-resistant memory. By means of genetic mosaicism, we localize this function to Kenyon cells, the mushroom body intrinsic neurons, as well as GABAergic APL neurons and local interneurons of the antennal lobes, suggesting that consolidated anesthesia-resistant memory requires widespread dopaminergic modulation within the olfactory circuit. Additionally, dopaminergic neurons themselves require D2R, suggesting a critical role in dopamine release via its recognized autoreceptor function. Considering the dual role of dopamine in balancing memory acquisition (proactive function of dopamine) and its "forgetting" (retroactive function of dopamine), our analysis suggests D2R as central player of either process. Dopamine provides different information; while it mediates reinforcement during the learning act (proactive function), it balances memory performance between two antithetic processes thereafter (retroactive function) (i.e., forgetting and augmentation). Such bidirectional design can also be found at level of dopamine receptors, where augmenting D1 and abating D2 receptors are engaged to balance cellular cAMP levels. Here, we report that consolidated anesthesia-resistant memory (ARM), but not other concomitant memory phases, are sensitive to bidirectional dopaminergic signals. By means of genetic mosaicism, we identified widespread dopaminergic modulation within the olfactory circuit that suggests nonredundant and reiterating functions of D2R in support of ARM. Our results oppose ARM to its concomitant memory phases

  2. Development and first tests of GEM-like detectors with resistive electrodes

    CERN Document Server

    Peskov, Vladimir; Centro, Sandro; Di Mauro, A; Lund-Jensen, B; Martinengo, P; Nappi, E; Oliveira, R; Pietropaolo, F; Picchi, P; Periale, L; Rodionov, I; Ventura, Sandro

    2007-01-01

    We have developed and tested several prototypes of GEM-like detectors with electrodes coated with resistive layers or completely made of resistive materials. These detectors can operate stably at gains close to 105. The resistive layers limit the energy of discharges appearing at higher gains thus making the detectors very robust. We demonstrated that the cathodes of some of these detectors could be coated by CsI or SbCs layers to enhance the detection efficiency for the UV and visible photons. We also discovered that such detectors can operate stably in the cascade mode and high overall gains ($~10^{6}$) are reachable. Applications in several areas, for example in RICH or in noble liquid TPCs are therefore possible. The first results from the detection of UV photons at room and cryogenic temperatures will be given.

  3. Research on test of alkali-resistant glass fibre enhanced seawater coral aggregate concrete

    Science.gov (United States)

    Liu, Leiyang; Wang, Xingquan

    2017-12-01

    It is proposed in the 13th five-year plan that reefs of the south China sea should be constructed. In the paper, an innovative thinking was proposed for the first time in order to realize local material acquisition in island construction and life dependence on sea, namely alkali-resistant glass fibre is mixed in coralaggregate concrete as reinforcing material. The glass fibre is characterized by low price, low hardness, good dispersibility and convenient construction. Reliable guarantee is provided for widely applying the material in future projects. In the paper, an orthogonal test method is firstly applied to determine the mix proportion of grade C50 coral aggregate concrete. Then, the design plan ofmix proportion of alkali-resistant glass fibre enhanced seawater coral aggregate concrete is determined. Finally, the influence law of alkali-resistant glass fibre dosageon tensile compressiveflexture strength of seawatercoralaggregate concrete is made clear.

  4. A Method for testing the integrated thermal resistance of thermoelectric modules

    Science.gov (United States)

    Gao, Junling; Du, Qungui; Chen, Min

    2013-11-01

    The integrated thermal resistance (ITR) of thermoelectric modules (TEMs) is an important parameter that represents the thermal-conduction of ceramic substrates, copper conducting strips, and welding material used in the TEM as well as the thermal contact resistances between different materials. In this study, an accurate and practical test method is proposed for the ITR of TEMs according to thermoelectric heat transfer theory and the equivalent characteristics of heat flux through the cold and hot sides of TEMs in an open-circuit situation. By using such measurements and comparisons, it is verified that the measured ITR value in our mode is accurate and reliable. In particular this method accurately predicts the actual operating conditions of TEMs, in which TEMs are under certain mechanical pressure. It effectively solves the problem of thermal resistance extraction from operating TEMs and is of great significance in their analysis and optimization.

  5. Amplification and pyrosequencing of near-full-length hepatitis C virus for typing and monitoring antiviral resistant strains.

    Science.gov (United States)

    Trémeaux, P; Caporossi, A; Ramière, C; Santoni, E; Tarbouriech, N; Thélu, M-A; Fusillier, K; Geneletti, L; François, O; Leroy, V; Burmeister, W P; André, P; Morand, P; Larrat, S

    2016-05-01

    Directly acting antiviral drugs have contributed considerable progress to hepatitis C virus (HCV) treatment, but they show variable activity depending on virus genotypes and subtypes. Therefore, accurate genotyping including recombinant form detection is still of major importance, as is the detection of resistance-associated mutations in case of therapeutic failure. To meet these goals, an approach to amplify the HCV near-complete genome with a single long-range PCR and sequence it with Roche GS Junior was developed. After optimization, the overall amplification success rate was 73% for usual genotypes (i.e. HCV 1a, 1b, 3a and 4a, 16/22) and 45% for recombinant forms RF_2k/1b (5/11). After pyrosequencing and subsequent de novo assembly, a near-full-length genomic consensus sequence was obtained for 19 of 21 samples. The genotype and subtype were confirmed by phylogenetic analysis for every sample, including the suspected recombinant forms. Resistance-associated mutations were detected in seven of 13 samples at baseline, in the NS3 (n = 3) or NS5A (n = 4) region. Of these samples, the treatment of one patient included daclatasvir, and that patient experienced a relapse. Virus sequences from pre- and posttreatment samples of four patients who experienced relapse after sofosbuvir-based therapy were compared: the selected variants seem too far from the NS5B catalytic site to be held responsible. Although tested on a limited set of samples and with technical improvements still necessary, this assay has proven to be successful for both genotyping and resistance-associated variant detection on several HCV types. Copyright © 2016 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  6. Changes in myonuclear domain size do not precede muscle hypertrophy during prolonged resistance-type exercise training.

    Science.gov (United States)

    Snijders, T; Smeets, J S J; van Kranenburg, J; Kies, A K; van Loon, L J C; Verdijk, L B

    2016-02-01

    Muscle fibre hypertrophy is accompanied by an increase in myonuclear number, an increase in myonuclear domain size or both. It has been suggested that increases in myonuclear domain size precede myonuclear accretion and subsequent muscle fibre hypertrophy during prolonged exercise training. In this study, we assessed the changes in muscle fibre size, myonuclear and satellite cell content throughout 12 weeks of resistance-type exercise training in young men. Twenty-two young men (23 ± 1 year) were assigned to a progressive, 12-weeks resistance-type exercise training programme (3 sessions per week). Muscle biopsies from the vastus lateralis muscle were taken before and after 2, 4, 8 and 12 weeks of exercise training. Muscle fibre size, myonuclear content, myonuclear domain size and satellite cell content were assessed by immunohistochemistry. Type I and type II muscle fibre size increased gradually throughout the 12 weeks of training (type I: 18 ± 5%, type II: 41 ± 6%, P muscle fibres. No changes in type I and type II myonuclear domain size were observed at any time point throughout the intervention. Satellite cell content increased significantly over time in both type I and type II muscle fibres (P muscle fibre hypertrophy during prolonged resistance-type exercise training in vivo in humans. © 2015 Scandinavian Physiological Society. Published by John Wiley & Sons Ltd.

  7. Standard test method for ranking resistance of materials to sliding wear using block-on-ring wear test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers laboratory procedures for determining the resistance of materials to sliding wear. The test utilizes a block-on-ring friction and wear testing machine to rank pairs of materials according to their sliding wear characteristics under various conditions. 1.2 An important attribute of this test is that it is very flexible. Any material that can be fabricated into, or applied to, blocks and rings can be tested. Thus, the potential materials combinations are endless. However, the interlaboratory testing has been limited to metals. In addition, the test can be run with various lubricants, liquids, or gaseous atmospheres, as desired, to simulate service conditions. Rotational speed and load can also be varied to better correspond to service requirements. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Wear test results are reported as the volume loss in cubic millimetres for both the block and ring. Materials...

  8. Field Testing of Energy-Efficient Flood-Damage-Resistant Residential Envelope Systems Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Aglan, H.

    2005-08-04

    The primary purpose of the project was to identify materials and methods that will make the envelope of a house flood damage resistant. Flood damage resistant materials and systems are intended to be used to repair houses subsequent to flooding. This project was also intended to develop methods of restoring the envelopes of houses that have been flooded but are repairable and may be subject to future flooding. Then if the house floods again, damage will not be as extensive as in previous flood events and restoration costs and efforts will be minimized. The purpose of the first pair of field tests was to establish a baseline for typical current residential construction practice. The first test modules used materials and systems that were commonly found in residential envelopes throughout the U.S. The purpose of the second pair of field tests was to begin evaluating potential residential envelope materials and systems that were projected to be more flood-damage resistant and restorable than the conventional materials and systems tested in the first pair of tests. The purpose of testing the third slab-on-grade module was to attempt to dry flood proof the module (no floodwater within the structure). If the module could be sealed well enough to prevent water from entering, then this would be an effective method of making the interior materials and systems flood damage resistant. The third crawl space module was tested in the same manner as the previous modules and provided an opportunity to do flood tests of additional residential materials and systems. Another purpose of the project was to develop the methodology to collect representative, measured, reproducible (i.e. scientific) data on how various residential materials and systems respond to flooding conditions so that future recommendations for repairing flood damaged houses could be based on scientific data. An additional benefit of collecting this data is that it will be used in the development of a standard test

  9. Will acarbose improve the metabolic abnormalities of insulin-resistant type 2 diabetes mellitus?

    Science.gov (United States)

    Scott, R; Lintott, C J; Zimmet, P; Campbell, L; Bowen, K; Welborn, T

    1999-03-01

    Individuals with type 2 diabetes mellitus (n = 105; age 36-71 years) on diet therapy alone, and with quite good glycaemic control (mean HbA1c approximately 7.0%) were randomized to receive acarbose (100 mg three times daily) or placebo for 16 weeks, and changes in clinical and metabolic parameters indicative of Syndrome X were monitored. Fasting levels of glucose, glycosylated haemoglobin (HbA1c), true insulin, proinsulin, fibrinogen and lipids were measured four times weekly, and glucose, insulin, proinsulin and triglyceride responses to a standardized 1.6 MJ breakfast were determined at 0, 1 and 2 h post meal. Analysis was on an intention-to-treat basis. Fasting levels of glucose (P fasting glucose and triglyceride levels, lowers HbA1c and limits the glycaemic and insulin response to food in individuals with type 2 diabetes mellitus with Syndrome X. Pharmacological agents that improve the metabolic environment and reduce insulin resistance have the potential to limit the progression of atherogenesis associated with type 2 diabetes mellitus.

  10. Flux nucleation in the current-induced resistive state of a constricted type I superconductor

    International Nuclear Information System (INIS)

    Selig, K.P.; Huebener, R.P.

    1981-01-01

    The current-induced resistive state in a constricted type I superconductor is characterized by a train of flux tubes traversing the sample perpendicular to the direction of the applied current following its nucleation at the sample edge. The temporal structure of the nucleation process can be investigated by attempting to synchronize this process with small periodic current pulses superimposed on the direct bias current. The resistive dc voltage is then to be measured as a function of the pulse parameters such as frequency and width. We have performed such experiments at 4.2 K on constricted Pb films of 6--8 μm thickness and 100 μm width. Simultaneously with the electrical measurements the dynamic behavior of the flux tubes was directly observed using a stroboscopic magnetooptical method for magnetic flux detection. Our electrical measurements clearly show how the size of the nucleated flux tubes varies with the direct bias current and the nucleation frequency. The positive wall energy in the Pb films results in a lower limit for this size as expected. The influence of the preceding flux tubes still existing within the constriction upon the flux nucleation process is revealed in detail. All observations can be understood from a consideration of the energy balance during the flux nucleation process

  11. Optimization of chemical structure of Schottky-type selection diode for crossbar resistive memory.

    Science.gov (United States)

    Kim, Gun Hwan; Lee, Jong Ho; Jeon, Woojin; Song, Seul Ji; Seok, Jun Yeong; Yoon, Jung Ho; Yoon, Kyung Jean; Park, Tae Joo; Hwang, Cheol Seong

    2012-10-24

    The electrical performances of Pt/TiO(2)/Ti/Pt stacked Schottky-type diode (SD) was systematically examined, and this performance is dependent on the chemical structures of the each layer and their interfaces. The Ti layers containing a tolerable amount of oxygen showed metallic electrical conduction characteristics, which was confirmed by sheet resistance measurement with elevating the temperature, transmission line measurement (TLM), and Auger electron spectroscopy (AES) analysis. However, the chemical structure of SD stack and resulting electrical properties were crucially affected by the dissolved oxygen concentration in the Ti layers. The lower oxidation potential of the Ti layer with initially higher oxygen concentration suppressed the oxygen deficiency of the overlying TiO(2) layer induced by consumption of the oxygen from TiO(2) layer. This structure results in the lower reverse current of SDs without significant degradation of forward-state current. Conductive atomic force microscopy (CAFM) analysis showed the current conduction through the local conduction paths in the presented SDs, which guarantees a sufficient forward-current density as a selection device for highly integrated crossbar array resistive memory.

  12. Is the test of senior friendly/child resistant packaging ethical?

    Science.gov (United States)

    Bix, Laura; de la Fuente, Javier; Pimple, Kenneth D; Kou, Eric

    2009-12-01

    Research has documented the drastic reduction of unintentional poisonings of children since the introduction of child resistant (CR) packaging. However, studies also indicate that consumers report difficulty using CR packages, in part because tests which determine the 'senior friendliness' of CR designs that are used throughout the world disallow people with 'overt or obvious' disabilities from being test subjects. Our review of drug package usability suggests that the current tests of CR packaging can and should be revised to correct this problem. We use US legislation, regulation and data to exemplify these points, but the conclusions are applicable to all protocols that include the exclusionary provision.

  13. Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the resistance of transparent plastics and coatings used in aerospace windscreens, canopies, and viewports to surface erosion as a result of dust impingement. This test method simulates flight through a defined particle cloud environment by means of independent control of particle size, velocity, impact angle, mass loading, and test duration. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  14. Using an Autonomous Scale Ship Model for Resistance and Parametric Roll Tests

    Directory of Open Access Journals (Sweden)

    Fernando LOPEZ PEŇA

    2015-04-01

    Full Text Available This work presents the developing of a self-propelled scale ship model aimed to perform resistance and parametric roll tests in towing tanks. The main characteristic of the proposed system is that it doesn’t have any material link to a towing device to carry out the tests. This ship model has been fully instrumented in order to acquire all the significant raw data, process them onboard and communicate with an inshore station. This works presents a description of the proposed model as well as some results obtained by its use during a towing tank testing campaign.

  15. Standard test method for determination of resistance to stable crack extension under low-constraint conditions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This standard covers the determination of the resistance to stable crack extension in metallic materials in terms of the critical crack-tip-opening angle (CTOAc), ψc and/or the crack-opening displacement (COD), δ5 resistance curve (1). This method applies specifically to fatigue pre-cracked specimens that exhibit low constraint (crack-length-to-thickness and un-cracked ligament-to-thickness ratios greater than or equal to 4) and that are tested under slowly increasing remote applied displacement. The recommended specimens are the compact-tension, C(T), and middle-crack-tension, M(T), specimens. The fracture resistance determined in accordance with this standard is measured as ψc (critical CTOA value) and/or δ5 (critical COD resistance curve) as a function of crack extension. Both fracture resistance parameters are characterized using either a single-specimen or multiple-specimen procedures. These fracture quantities are determined under the opening mode (Mode I) of loading. Influences of environment a...

  16. Electrical resistivity monitoring of the single heater test in Yucca Mountain

    International Nuclear Information System (INIS)

    Ramirez, A.

    1997-10-01

    Of the several thermal, mechanical and hydrological measurements being used to monitor the rockmass response in the Single Heater Test, electrical resistance tomography (ERT) is being used to monitor the movement of liquid water with a special interest in the movement of condensate out of the system. Images of resistivity change were calculated using data collected before, during and after the heating episode. This report will concentrate on the results obtained after heating ceased; previous reports discuss the results obtained during the heating phase. The changes recovered show a region of increasing resistivity approximately centered around the heater as the rock mass cooled. The size of this region grows with time and the resistivity increases become stronger. The increases in resistivity are caused by both temperature and saturation changes. The Waxman Smits model has been used to calculate rock saturation after accounting for temperature effects. The saturation estimates suggest that during the heating phase, a region of drying forms around the heater. During the cooling phase, the dry region has remained relatively stable. Wetter rock regions which developed below the heater during the heating phase, are slowly becoming smaller in size during the cooling phase. The last set of images indicate that some rewetting of the dry zone may be occurring. The accuracy of the saturation estimates depends on several factors that are only partly understood

  17. Explaining psychological insulin resistance in adults with non-insulin-treated type 2 diabetes

    DEFF Research Database (Denmark)

    Holmes-Truscott, Elizabeth; Skinner, Timothy Chas; Pouwer, F

    2016-01-01

    to the model. CONCLUSIONS: Psychological insulin resistance may reflect broader distress about diabetes and concerns about its treatment but not general beliefs about medicines, depression or anxiety. Reducing diabetes distress and current treatment concerns may improve attitudes towards insulin as a potential......AIMS: To investigate the contribution of general and diabetes-specific emotional wellbeing and beliefs about medicines in the prediction of insulin therapy appraisals in adults with non-insulin-treated type 2 diabetes. METHODS: The sample included Diabetes MILES-Australia cross-sectional survey...... diabetes medications (BMQ Specific); negative insulin therapy appraisals (ITAS); depression (PHQ-9); anxiety (GAD-7), and diabetes distress (DDS-17). Factors associated with ITAS Negative scores were examined using hierarchical multiple regressions. RESULTS: Twenty-two percent of the variance in ITAS...

  18. p38 MAPK activation upregulates proinflammatory pathways in skeletal muscle cells from insulin-resistant type 2 diabetic patients

    DEFF Research Database (Denmark)

    Brown, Audrey E; Palsgaard, Jane; Borup, Rehannah

    2015-01-01

    Skeletal muscle is the key site of peripheral insulin resistance in type 2 diabetes. Insulin-stimulated glucose uptake is decreased in differentiated diabetic cultured myotubes, which is in keeping with a retained genetic/epigenetic defect of insulin action. We investigated differences in gene...... expression during differentiation between diabetic and control muscle cell cultures. Microarray analysis was performed using skeletal muscle cell cultures established from type 2 diabetic patients with a family history of type 2 diabetes and clinical evidence of marked insulin resistance and nondiabetic...... significantly, it did not improve insulin-stimulated glucose uptake. Increased cytokine expression driven by increased p38 MAPK activation is a key feature of cultured myotubes derived from insulin-resistant type 2 diabetic patients. p38 MAPK inhibition decreased cytokine expression but did not affect...

  19. Supplementation with Glucosamine Has no Adverse Effects on Glycemic Level and Insulin Resistance in Type 2 Diabetic Patients

    Directory of Open Access Journals (Sweden)

    Zohreh Mazloom

    2015-10-01

    Full Text Available Background: Use of glucosamine as an alternative treatment for osteoarthritis is becoming more frequent, including in those who have diabetes at the same time. The results from in vitro and animal studies propose that glucosamine may inversely affect glucose metabolism. However, the recommended dose of oral glucosamine in healthy people or diabetics did not have such effects consistently. The aim of the present study was to assess the effect of glucosamine on glycemic control and insulin resistance in type 2 diabetic patients. Methods: Fifty-four patients with type 2 diabetes participated in this randomized, double-blind, placebo-controlled study. The participants were assigned to receive 1500 mg glucosamine hydrochloride or placebo for 12 weeks. After determining their baseline characteristics, body mass index and dietary intake components, fasting blood glucose and fasting insulin were measured at weeks of 0, 8, and 12. Indices of insulin function including quantitative insulin sensitivity check index (QUICKI and homeostasis model assessment of insulin resistance (HOMA-IR were calculated by specific formulas. Independent t-test and general linear model repeated measures were used to analyze the data. Results: In the glucosamine group, the means of fasting blood glucose and insulin were 107.31±24.07 mg/dl and 8.75±4.37 μu/ ml, respectively at baseline, which reached 112.38±31.50 and 9.10±4.17 at week 12. In the placebo group, the mean for fasting blood glucose and insulin were 103.84±24.15 and 9.79±4.02 at the beginning of the study, which reached to 111.40±26.43 and 8.58±3.68 at week 12. The results showed that there were no significant differences in fasting blood glucose, insulin, HOMA-IR and QUICKI indices at all the studied time points (weeks of 0, 8 and 12 within or between the groups. Conclusion: Twelve weeks of a normal recommended dose of glucosamine supplements may not have adverse effects on glycemic control and insulin

  20. Testing of Type A and B packages in accordance with IAEA transport regulations

    International Nuclear Information System (INIS)

    Nitsche, F.; Runge, K.; Birkigt, W.; Mueller, E.

    1984-01-01

    Revised and extended version of a paper presented during the Interregional Training Course on the Safe Transport of Radioactive Materials, organized by the IAEA, Harwell, May 1982, dealing with the test conditions for Type A and Type B packages as well as possible test methods, the performance of testing, and the assessmnt of test results

  1. Electric Resistance Tests on Compacted Clay Material under Dynamic Load Coupled with Dry-Wet Cycling

    Directory of Open Access Journals (Sweden)

    Zheng Lu

    2018-01-01

    Full Text Available The study of compacted clay material under dynamic load coupled with dry-wet cycling is one of the most important areas in the field of transportation. In this paper, experiments in terms of compacted clay under dynamic load coupled with dry-wet cycling are performed, and synchronous resistivity tests are also conducted. According to the test results, the influences of cumulative plastic strain, dry-wet cycles, and amplitudes on the soil resistivity are analyzed. Then a new damage factor based on resistivity is proposed to evaluate the long-term performance of compacted clay material. The result of research shows that the evolution of the soil resistivity can be divided into two stages, which has a contrary tendency with that of cumulative plastic strain. The dry-wet cycles and amplitudes have a significant effect on the damage of the compacted soil, which indicates that the dry-wet cycling of compacted soil materials should not be ignored in road engineering, especially in rainy and humid areas.

  2. Friction correction for model ship resistance and propulsion tests in ice at NRC's OCRE-RC

    Directory of Open Access Journals (Sweden)

    Michael Lau

    2018-05-01

    Full Text Available This paper documents the result of a preliminary analysis on the influence of hull-ice friction coefficient on model resistance and power predictions and their correlation to full-scale measurements. The study is based on previous model-scale/full-scale correlations performed on the National Research Council - Ocean, Coastal, and River Engineering Research Center's (NRC/OCRE-RC model test data. There are two objectives for the current study: (1 to validate NRC/OCRE-RC's modeling standards in regarding to its practice of specifying a CFC (Correlation Friction Coefficient of 0.05 for all its ship models; and (2 to develop a correction methodology for its resistance and propulsion predictions when the model is prepared with an ice friction coefficient slightly deviated from the CFC of 0.05. The mean CFC of 0.056 and 0.050 for perfect correlation as computed from the resistance and power analysis, respectively, have justified NRC/OCRE-RC's selection of 0.05 for the CFC of all its models. Furthermore, a procedure for minor friction corrections is developed. Keywords: Model test, Ice resistance, Power, Friction correction, Correlation friction coefficient

  3. High-resolution Electrical Resistivity Tomography monitoring of a tracer test in a confined aquifer

    Science.gov (United States)

    Wilkinson, P. B.; Meldrum, P. I.; Kuras, O.; Chambers, J. E.; Holyoake, S. J.; Ogilvy, R. D.

    2010-04-01

    A permanent geoelectrical subsurface imaging system has been installed at a contaminated land site to monitor changes in groundwater quality after the completion of a remediation programme. Since the resistivities of earth materials are sensitive to the presence of contaminants and their break-down products, 4-dimensional resistivity imaging can act as a surrogate monitoring technology for tracking and visualising changes in contaminant concentrations at much higher spatial and temporal resolution than manual intrusive investigations. The test site, a municipal car park built on a former gasworks, had been polluted by a range of polycyclic aromatic hydrocarbons and dissolved phase contaminants. It was designated statutory contaminated land under Part IIA of the UK Environmental Protection Act due to the risk of polluting an underlying minor aquifer. Resistivity monitoring zones were established on the boundaries of the site by installing vertical electrode arrays in purpose-drilled boreholes. After a year of monitoring data had been collected, a tracer test was performed to investigate groundwater flow velocity and to demonstrate rapid volumetric monitoring of natural attenuation processes. A saline tracer was injected into the confined aquifer, and its motion and evolution were visualised directly in high-resolution tomographic images in near real-time. Breakthrough curves were calculated from independent resistivity measurements, and the estimated seepage velocities from the monitoring images and the breakthrough curves were found to be in good agreement with each other and with estimates based on the piezometric gradient and assumed material parameters.

  4. Impact of Rapid Susceptibility Testing and Antibiotic Selection Strategy on the Emergence and Spread of Antibiotic Resistance in Gonorrhea.

    Science.gov (United States)

    Tuite, Ashleigh R; Gift, Thomas L; Chesson, Harrell W; Hsu, Katherine; Salomon, Joshua A; Grad, Yonatan H

    2017-11-27

    Increasing antibiotic resistance limits treatment options for gonorrhea. We examined the impact of a hypothetical point-of-care (POC) test reporting antibiotic susceptibility profiles on slowing resistance spread. A mathematical model describing gonorrhea transmission incorporated resistance emergence probabilities and fitness costs associated with resistance based on characteristics of ciprofloxacin (A), azithromycin (B), and ceftriaxone (C). We evaluated time to 1% and 5% prevalence of resistant strains among all isolates with the following: (1) empiric treatment (B and C), and treatment guided by POC tests determining susceptibility to (2) A only and (3) all 3 antibiotics. Continued empiric treatment without POC testing was projected to result in >5% of isolates being resistant to both B and C within 15 years. Use of either POC test in 10% of identified cases delayed this by 5 years. The 3 antibiotic POC test delayed the time to reach 1% prevalence of triply-resistant strains by 6 years, whereas the A-only test resulted in no delay. Results were less sensitive to assumptions about fitness costs and test characteristics with increasing test uptake. Rapid diagnostics reporting antibiotic susceptibility may extend the usefulness of existing antibiotics for gonorrhea treatment, but ongoing monitoring of resistance patterns will be critical. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

  5. Low temperature resistivity plateau and non-saturating magnetoresistance in Type-II Weyl semimetal WP2

    Science.gov (United States)

    Nagpal, V.; Kumar, P.; Sudesh, Patnaik, S.

    2018-04-01

    We have studied the resistivity and magnetoresistance (MR) properties of the recently predicted type-II Weyl semimetal WP2. Polycrystalline WP2 is synthesized using solid state reaction and crystallizes in an orthorhombic structure with the Cmc21 spacegroup. The temperature dependent resistivity is enhanced with the application of magnetic field and a resistivity plateau is observed at low temperatures. We find a small dip in resistivity around 30K at 5T field suggesting that there might be a metal-insulator-like transition at higher magnetic fields. A non-saturating magnetoresistance is observed at low temperatures with maximum MR ˜ 94% at 2K and 6T. The value of MR decreases with the increase in temperature. We see a deviation from Kohler's power law which implies that the system comprises of two types of charge carriers.

  6. Molecular Phylogenetics of Transmitted Drug Resistance in Newly Diagnosed HIV Type 1 Individuals in Denmark, a Nation-Wide Study

    DEFF Research Database (Denmark)

    Audelin, Anne Margrethe; Gerstoft, Jan; Obel, Niels

    2011-01-01

    Abstract Highly active antiretroviral treatment is compromised by viral resistance mutations. Transmitted drug resistance (TDR) is therefore monitored closely, but follow-up studies of these patients are limited. Virus from 1405 individuals diagnosed with HIV-1 in Denmark between 2001 and 2009...... without resistance mutations. We observed no difference in progression of the infection between individuals infected with TDR and individuals infected with wild-type HIV-1. The prevalence of TDR is low in Denmark and transmission of dual-drug-resistant HIV-1 is infrequent. The TDR isolates were shown...... resulting in a prevalence of 6.1%, with no changes over time. The main resistance mutations were nucleoside reverse transcriptase inhibitor (NRTI) mutation 215 revertants, as well as nonnucleoside reverse transcriptase inhibitor (NNRTI) mutation 103N/S and protease inhibitor (PI) mutations 90M and 85V...

  7. Molecular phylogenetics of transmitted drug resistance in newly diagnosed HIV Type 1 individuals in Denmark: a nation-wide study

    DEFF Research Database (Denmark)

    Audelin, Anne Margrethe; Gerstoft, Jan; Obel, Niels

    2011-01-01

    Abstract Highly active antiretroviral treatment is compromised by viral resistance mutations. Transmitted drug resistance (TDR) is therefore monitored closely, but follow-up studies of these patients are limited. Virus from 1405 individuals diagnosed with HIV-1 in Denmark between 2001 and 2009...... without resistance mutations. We observed no difference in progression of the infection between individuals infected with TDR and individuals infected with wild-type HIV-1. The prevalence of TDR is low in Denmark and transmission of dual-drug-resistant HIV-1 is infrequent. The TDR isolates were shown...... resulting in a prevalence of 6.1%, with no changes over time. The main resistance mutations were nucleoside reverse transcriptase inhibitor (NRTI) mutation 215 revertants, as well as nonnucleoside reverse transcriptase inhibitor (NNRTI) mutation 103N/S and protease inhibitor (PI) mutations 90M and 85V...

  8. Leak testing United States Nuclear Regulatory Commission type b packaging

    International Nuclear Information System (INIS)

    Lacy, K.A.

    1995-01-01

    The Waste Isolation Pilot Plant (WTPP) is a one of its kind research and development facility operated by the Department of Energy, Carlsbad Area Office. Located in southeastern New Mexico, the WTPP is designed to demonstrate the safe, permanent disposal of transuranic (TRU) radioactive nuclear waste, accumulated from 40 years of nuclear weapons production. Before the waste can be disposed of, it must first be safely transported from generator storage sites to the WIPP. To accomplish this, the TRUPACT-II was designed and fabricated. This double containment, non-vented waste packaging successfully completed a rigorous testing program, and in 1989 received a Certificate of Compliance (C of C) from the Nuclear Regulatory Commission (NRC). Currently, the TRUPACT-II is in use at Idaho National Engineering Laboratory to transport waste on site for characterization. The DOE/CAO is responsible for maintaining the TRUPACT-II C of C. The C of C requires performance of nondestructive examination (NDE), e.g., visual testing (VT), dimensional inspections, Liquid Dye Penetrant testing (PT), and Helium Leak Detection (HLD). The Waste Isolation Division (WID) uses HLD for verification of the containment integrity. The following HLD tests are performed on annual basis or when required, i.e. repairs or component replacement: (1) fabrication verification leak tests on both the outer containment vessel (OCV) and the inner containment vessel (ICV); (2) assembly verification leak tests on the OCV and ICV upper main o-rings; and (3) assembly verification leak tests on the OCV and the ICV vent port plugs. These tests are addressed in detail as part of this presentation

  9. Monitoring of high temperature zone by resistivity tomography during in-situ heater test in sedimentary soft rocks

    International Nuclear Information System (INIS)

    Kubota, Kenji; Suzuki, Koichi; Ikenoya, Takafumi; Takakura, Nozomu; Tani, Kazuo

    2008-01-01

    In-situ heater test has been conducted to evaluate the influence of high temperature in an underground facility at a depth of 50 m. Resistivity monitoring is thought to be effective to map the extent of the high temperature zone. So we have conducted resistivity tomography during the heater test. As a result, low resistivity zone was appeared near the heated area as starting the heating, and the zone was expanded. Resistivity of rock is proportional to resistivity of pore water. It is known that pore water resistivity decreases as the temperature rise. This suggests that high temperature zone is detected and spatial distribution of temperature can be mapped by resistivity tomography. (author)

  10. Heavy-ion test of detectors with conventional and resistive Micromegas used in TPC configuration

    Energy Technology Data Exchange (ETDEWEB)

    Ducret, Jean-Eric, E-mail: jean-eric.ducret@cea.f [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); Legou, Philippe [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); Lukasik, Jerzy [Institute of Nuclear Physics, IFJ-PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Boudard, Alain; Combet, Michel [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); Czech, BronisLaw [Institute of Nuclear Physics, IFJ-PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Durand, Robert; Gorbinet, Thomas; Le Bourlout, Pascal; Leray, Sylvie [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); Matousek, Vladislav [Institute of Physics, Slovak Academy of Sciences, Dubravska cesta 9, 854 11 Bratislava (Slovakia); Nizery, Francois [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); PawLowski, Piotr [Institute of Nuclear Physics, IFJ-PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Salsac, Marie-Delphine [Commissariat a l' Energie Atomique, IRFU, F91191 Gif sur Yvette (France); Yordanov, Orlin [Institute of Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences, 72, Tzanigradsko chaussee Blvd, BG-1784 Sofia (Bulgaria)

    2011-02-01

    We have performed tests of Micromegas detector prototypes using the heavy-ion beams from the SIS synchrotron of GSI (Darmstadt, Germany). The beams varied from {sup 12}C{sup 6+} to {sup 179}Au{sup 65+} and from 250 to 1000 MeV per nucleon. We have tested two amplification technologies, conventional and resistive Micromegas, and two construction concepts, bulk-Micromegas and micro-meshes screwed on the PCB. The obtained position resolution below 200{mu}m for 5 mm wide strips implies that the bulk resistive Micromegas technology might meet the requirements of the future R3B TPC project. We also developed a fast and very low noise front-end electronics connected directly to the Printed Circuit Board (PCB) of the detector itself. This concept has shown very good performances and robustness.

  11. 45 CFR 170.410 - Types of testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.410 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.410 Types...

  12. A STUDY ON THE EARTHQUAKE RESPONSE AND EARTHQUAKE RESISTANT DESIGN METHOD OF AN OPEN TYPE WHARF WITH PNEUMATIC CAISSONS

    Science.gov (United States)

    Oishi, Masahiko; Nagao, Takashi; Shigeki, Kouji; Ouchi, Masatoshi; Sato, Yuske; Kinomiya, Osamu

    Seismic response of an open type wharf with pneumatic caisson was clarified using a dynamic finite element method. As a result, rocking behavior of caisson foundations were observed and applicability of a frame model analysis to the earthquake resistant design of a wharf was suggested. Authors proposed the framework of earthquake resistant design method of the wharf including the evaluation method of response acceleration of the wharf.

  13. Beam test results of a resistive plate chamber made of Chinese bakelites

    CERN Document Server

    Ying, J; Ban, Y; Liu Hong Tao; Zhu, Z M; Zhu, Z Y; Chen, T; Ma Jing Guo; Qian, S J

    2001-01-01

    The detailed beam test results of the first Chinese made avalanche mode resistive plate chamber are reported. The experimental set-ups at CERN GIF area are introduced. The detection efficiency, position resolution and time resolution of the chamber fulfil requirements as muon trigger for the future LHC experiments, while the rate capability is not good enough if the chamber is used at forward region. The applicability and the further possible improvements of the chamber are discussed. (12 refs).

  14. Resistive Plate Chamber Performance During the CMS Magnet Test Cosmic Challenge

    CERN Document Server

    Trentadue, R

    2008-01-01

    The CMS detector at the CERN Large Hadron Collider (LHC) is equipped with a redundant muon system based on Drift Tubes Chambers (barrel region) and Cathode Strip Chamber (endcap region), and Resistive Plate Chamber (RPC). During the summer and fall 2006 a first integrated test of an entire CMS slice was performed at the SX5 experimental surface hall. The RPC chambers were operated with cosmic rays. The results on the RPC performance are reported.

  15. Hardware Design of Tuber Electrical Resistance Tomography System Based on the Soil Impedance Test and Analysis

    OpenAIRE

    Liu Shuyi; Deng Xiang; Jiang Zili; Tang Yu

    2016-01-01

    The hardware design of tuber electrical resistance tomography (TERT) system is one of the key research problems of TERT data acquisition system. The TERT system can be applied to the tuber growth process monitoring in agriculture, i.e., the TERT data acquisition system can realize the real imaging of tuber plants in soil. In TERT system, the imaging tuber and soil multiphase medium is quite complexity. So, the impedance test and analysis of soil multiphase medium is very important to the desi...

  16. Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes

    Energy Technology Data Exchange (ETDEWEB)

    Borchert, M.; Mori, G. [General Analytical and Physical Chemistry, Montanuniversitaet Leoben (Austria); Bischof, M.; Tomandl, A. [Hilti Corporation, Liechtenstein (Austria)

    2015-12-15

    The German Guidelines for stainless steel in buildings (Z.30.3-6) issued by the German Institute for Building Technology (DIBt) categorize various stainless steel grades into five corrosion resistance classes (CRCs). Only 21 frequently used grades are approved and assigned to these CRCs. To assign new or less commonly used materials, a large program of outdoor exposure tests and laboratory tests is required. The present paper shows the results of stress corrosion cracking (SCC) tests that can distinguish between different CRCs. Slow strain rate tests (SSRT) were performed in various media and at different temperatures. CRC IV could be distinguished from CRC II and CRC III with a 31.3 % Cl{sup -} as MgCl{sub 2} solution at 140 .deg. C. CRC II and CRC III could be differentiated by testing in a 30% Cl{sup -} as MgCl{sub 2} solution at 100 .deg. C.

  17. The emerging role of incretins in the pathophysiology of insulin resistance in type 1 diabetes.

    Directory of Open Access Journals (Sweden)

    Gorana Mirošević

    2017-09-01

    Full Text Available The pathophysiology of insulin resistance (IR comprises a complex adipokine-mediated crosstalk between white adipose tissue and other organs. Although it is a prominent feature of Type 2 diabetes, a certain degree of IR also exists in Type 1 diabetes mellitus (T1DM. Incretins are gut derived hormones secreted into the circulation in response to nutrient ingestion that enhances glucose-stimulated insulin secretion. One of the main incretin hormones is glucagon-like peptide-1. It is degraded by dipeptidyl peptidase-4 (DPP-4 minutes after secretion. The diminished “incretin effect” is recognized as a part of prediabetes, usually associated with IR. DPP-4, as a part of the incretin system, has recently been proposed as a novel adipokine linked to IR and DPP-4 activity is higher in T1DM patients compared to healthy controls; furthermore, it correlates with the degree of IR. The role of the incretin system, with special emphasis on DPP-4, merits further evaluation because it might offer an insulin add-on therapeutic approach in the metabolic control of T1DM.

  18. Insulin resistance in Chinese patients with type 2 diabetes is associated with C-reactive protein independent of abdominal obesity

    Directory of Open Access Journals (Sweden)

    Feng Xiaocheng

    2010-12-01

    Full Text Available Abstract Background There is debate as to whether the association between C-reactive protein (CRP and insulin resistance is independent of body fatness, particularly central obesity. Therefore, the association among CRP, insulin resistance and obesity was analyzed in Chinese patients with type 2 diabetes. Methods The study included 520 Chinese patients diagnosed with type 2 diabetes with CRP levels not exceeding 10 mg/L. The degree of insulin resistance was determined with the homeostasis model assessment of insulin resistance (HOMA-IR. The CRP levels were categorized into quartiles from the lowest to the highest concentrations (Q1-Q4. Results Body mass index (BMI and waist circumference (WC were both higher in Q4, Q3 and Q2 than those in Q1. HOMA-IR was higher in Q2, Q3 and Q4 than that in Q1 (Q1 vs Q4, P Conclusion These findings showed that insulin resistance was associated with CRP levels independent of abdominal obesity in Chinese patients with type 2 diabetes, suggesting that abdominal obesity could only partly explain the link between subclinical inflammation and insulin resistance.

  19. Identification and characterization of the multidrug resistance gene cfr in a Panton-Valentine leukocidin-positive sequence type 8 methicillin-resistant Staphylococcus aureus IVa (USA300) isolate.

    LENUS (Irish Health Repository)

    Shore, Anna C

    2010-12-01

    The staphylococcal cfr gene mediates resistance to phenicols, lincosamides, oxazolidinones, pleuromutilins, and streptogramin A, a phenotype that has been termed PhLOPS(A). The cfr gene has mainly been associated with coagulase-negative staphylococcal isolates from animals, and only a few cfr-positive methicillin-resistant Staphylococcus aureus (MRSA) isolates have been described so far. This study reports the first description of a cfr-positive MRSA isolate (M05\\/0060) belonging to the pandemic Panton-Valentine leukocidin (PVL)-positive sequence type 8 MRSA IVa\\/USA300 (ST8-MRSA-IVa\\/USA300) clone. The cfr gene was detected in M05\\/0060 using a DNA microarray which was used to screen PVL-positive MRSA isolates for the presence of virulence genes, typing markers, and antimicrobial resistance genes. Antimicrobial susceptibility testing revealed that M05\\/0060 exhibited the cfr-associated resistance phenotype. Molecular analysis identified the presence of cfr and a second phenicol resistance gene, fexA, on a novel 45-kb conjugative plasmid, which was designated pSCFS7. Within pSCFS7, a DNA segment consisting of cfr, a truncated copy of insertion sequence IS21-558, and a region with homology to the DNA invertase gene bin3 of transposon Tn552 from Bacillus mycoides was integrated into the transposase gene tnpB of the fexA-carrying transposon Tn558. The emergence of a multidrug-resistant cfr-positive variant of ST8-MRSA-IVa\\/USA300 is alarming and requires ongoing surveillance. Moreover, the identification of a novel conjugative plasmid carrying the cfr gene indicates the ability of cfr to spread to other MRSA strains.

  20. Effect of simulated resistance, fleeing, and use of force on standardized field sobriety testing.

    Science.gov (United States)

    Ho, Jeffrey; Dawes, Donald; Nystrom, Paul; Moore, Johanna; Steinberg, Lila; Tilton, Annemarie; Miner, James

    2015-07-01

    When a law enforcement officer (LEO) stops a suspect believed to be operating (a vehicle) while impaired (OWI), the suspect may resist or flee, and the LEO may respond with force. The suspect may then undergo a Standardized Field Sobriety Test (SFST) to gauge impairment. It is not known whether resistance, fleeing, or actions of force can create an inaccurate SFST result. We examined the effect of resistance, fleeing, and force on the SFST. Human volunteers were prospectively randomized to have a SFST before and after one of five scenarios: (1) five-second conducted electrical weapon exposure; (2) 100-yard (91.4 m) sprint; (3) 45-second physical fight; (4) police dog bite with protective gear; and (5) Oleoresin Capsicum spray to the face with eyes shielded. The SFST was administered and graded by a qualified LEO. After the SFST, the volunteer entered their scenario and was then administered another SFST. Data were analyzed using descriptive statistics. SFST performance was compared before and after using chi-square tests. Fifty-seven subjects enrolled. Three received a single-point penalty during one component of the three-component SFST pre-scenario. No subject received a penalty point in any components of the SFST post-scenario (p = 0.08). This is the first human study to examine the effects of physical resistance, flight, and use of force on the SFST result. We did not detect a difference in the performance of subjects taking the SFST before and after exposure to resistance, flight, or a simulated use of force. © Australian Council for Educational Research 2014.

  1. INSULATION RESISTANCE OF PRINTED CIRCUIT BOARDS. BEHAVIOR OF CERTAIN TYPES AND MAKES UNDER DIFFERENT CLIMATIC CONDITIONS. En undersoegelse af en raekke typer og fabrikater under forskellige klimatiske forhold

    Energy Technology Data Exchange (ETDEWEB)

    Olesen, S. T.

    1971-11-15

    The present study embraces measurements of insulation resistance on a number of types and makes of printed-circuit boards. The insulation measurements were performed on boards just received from the manufacturer, as well as on boards exposed to humidity or to elevated temperatures. A total of 33 types from five different material categories were obtained. The test material used thus originated from a variety of independent sources. The purpose of the project was to investigate the frequency with which batches with insufficiently baked material - and consequently having a poor insulation resistance - were encountered in practice. No such batches were in fact found, and it is likely that they do not occur as often as had previously been assumed.

  2. Establishment of New Transmissible and Drug-Sensitive Human Immunodeficiency Virus Type 1 Wild Types due to Transmission of Nucleoside Analogue-Resistant Virus

    NARCIS (Netherlands)

    Ronde, Anthony de; Dooren, Maaike van; Hoek, Lian van der; Bouwhuis, Denise; Rooij, Esther de; Gemen, Bob van; Boer, R.J. de; Goudsmit, Jaap

    2000-01-01

    Sequence analysis of human immunodeficiency virus type 1 (HIV-1) from 74 persons with acute infections identified eight strains with mutations in the reverse transcriptase (RT) gene at positions 41, 67, 68, 70, 215, and 219 associated with resistance to the nucleoside analogue zidovudine (AZT).

  3. Establishment of new transmissible and drug-sensitive human immunodeficiency virus type 1 wild types due to transmission of nucleoside analogue-resistant virus

    NARCIS (Netherlands)

    de Ronde, A.; van Dooren, M.; van der Hoek, L.; Bouwhuis, D.; de Rooij, E.; van Gemen, B.; de Boer, R.; Goudsmit, J.

    2001-01-01

    Sequence analysis of human immunodeficiency virus type 1 (HIV-1) from 74 persons with acute infections identified eight strains with mutations in the reverse transcriptase (RT) gene at positions 41, 67, 68, 70, 215, and 219 associated with resistance to the nucleoside analogue zidovudine (AZT).

  4. High prevalence of antibiotic-resistant Mycoplasma genitalium in nongonococcal urethritis: the need for routine testing and the inadequacy of current treatment options.

    Science.gov (United States)

    Pond, Marcus J; Nori, Achyuta V; Witney, Adam A; Lopeman, Rose C; Butcher, Philip D; Sadiq, Syed Tariq

    2014-03-01

     Empirical antibiotic therapy for nongonococcal urethritis (NGU) and cervicitis is aimed at Chlamydia trachomatis, but Mycoplasma genitalium, which also commonly causes undiagnosed NGU, necessitates treatment with macrolides or fluoroquinolones rather than doxycycline, the preferred chlamydia treatment. Prevalence of M. genitalium and associated genotypic markers of macrolide and fluoroquinolone resistance among men symptomatic of urethritis were investigated. Genetic diversity of M. genitalium populations was determined to infer whether findings were applicable beyond our setting.  Mycoplasma genitalium and other NGU pathogens were detected using nucleic acid amplification methods, and DNA sequencing was used to detect genotypic resistance markers of macrolide and fluoroquinolone antibiotics in 23S ribosomal RNA, gyrA, gyrB, and parC genes. MG191 single-nucleotide polymorphism typing and MG309 variable number tandem analysis were combined to assign a dual locus sequence type (DLST) to each positive sample.  Among 217 men, M. genitalium prevalence was 16.7% (95% confidence interval [CI], 9.5%-24.0%) and C. trachomatis prevalence was 14.7% (95% CI, 7.8%-21.6%) in NGU cases. Nine of 22 (41%; 95% CI, 20%-62%) patients with M. genitalium were infected with DLSTs possessing genotypic macrolide resistance and 1 patient was infected with a DLST having genotypic fluoroquinolone resistance. Typing assigned M. genitalium DLSTs to 2 major clusters, broadly distributed among previously typed international strains. Genotypic macrolide resistance was spread within these 2 clusters.  Mycoplasma genitalium is a frequent undiagnosed cause of NGU in this population with rates of macrolide resistance higher than those previously documented. Current guidelines for routine testing and empirical treatment of NGU should be modified to reduce treatment failure of NGU and the development of further resistance.

  5. 14 CFR 120.109 - Types of drug testing required.

    Science.gov (United States)

    2010-01-01

    ... that employee's performance either contributed to an accident or can not be completely discounted as a... determination, using the best information available at the time of the determination, that the employee's performance could not have contributed to the accident. The employee shall submit to post-accident testing...

  6. Potential Biomarkers of Insulin Resistance and Atherosclerosis in Type 2 Diabetes Mellitus Patients with Coronary Artery Disease

    Directory of Open Access Journals (Sweden)

    Sharifah Intan Qhadijah Syed Ikmal

    2013-01-01

    Full Text Available Type 2 diabetes mellitus patients with coronary artery disease have become a major public health concern. The occurrence of insulin resistance accompanied with endothelial dysfunction worsens the state of atherosclerosis in type 2 diabetes mellitus patients. The combination of insulin resistance and endothelial dysfunction leads to coronary artery disease and ischemic heart disease complications. A recognized biological marker, high-sensitivity C-reactive protein, has been used widely to assess the progression of atherosclerosis and inflammation. Along with coronary arterial damage and inflammatory processes, high-sensitivity C-reactive protein is considered as an essential atherosclerosis marker in patients with cardiovascular disease, but not as an insulin resistance marker in type 2 diabetes mellitus patients. A new biological marker that can act as a reliable indicator of both the exact state of insulin resistance and atherosclerosis is required to facilitate optimal health management of diabetic patients. Malfunctioning of insulin mechanism and endothelial dysfunction leads to innate immune activation and released several biological markers into circulation. This review examines potential biological markers, YKL-40, alpha-hydroxybutyrate, soluble CD36, leptin, resistin, interleukin-18, retinol binding protein-4, and chemerin, as they may play significant roles in insulin resistance and atherosclerosis in type 2 diabetes mellitus patients with coronary artery disease.

  7. Developments and the preliminary tests of Resistive GEMs manufactured by a screen printing technology

    CERN Document Server

    Agócs, G; Oliveira, R; Martinego, P; Peskov, Vladimir; Pietropaolo, P; Picchi, P

    2008-01-01

    We report promising initial results obtained with new resistive-electrode GEM (RETGEM) detectors manufactured, for the first time, using screen printing technology. These new detectors allow one to reach gas gains nearly as high as with ordinary GEM-like detectors with metallic electrodes; however, due to the high resistivity of its electrodes the RETGEM, in contrast to ordinary hole-type detectors, has the advantage of being fully spark protected. We discovered that RETGEMs can operate stably and at high gains in noble gases and in other badly quenched gases, such as mixtures of noble gases with air and in pure air; therefore, a wide range of practical applications, including dosimetry and detection of dangerous gases, is foreseeable. To promote a better understanding of RETGEM technology some comparative studies were completed with metallic-electrode thick GEMs. A primary benefit of these new RETGEMs is that the screen printing technology is easily accessible to many research laboratories. This accessibilit...

  8. Testing Transgenic Aspen Plants with bar Gene for Herbicide Resistance under Semi-natural Conditions.

    Science.gov (United States)

    Lebedev, V G; Faskhiev, V N; Kovalenko, N P; Shestibratov, K A; Miroshnikov, A I

    2016-01-01

    Obtaining herbicide resistant plants is an important task in the genetic engineering of forest trees. Transgenic European aspen plants (Populus tremula L.) expressing the bar gene for phosphinothricin resistance have been produced using Agrobacterium tumefaciens-mediated transformation. Successful genetic transformation was confirmed by PCR analysis for thirteen lines derived from two elite genotypes. In 2014-2015, six lines were evaluated for resistance to herbicide treatment under semi-natural conditions. All selected transgenic lines were resistant to the herbicide Basta at doses equivalent to 10 l/ha (twofold normal field dosage) whereas the control plants died at 2.5 l/ha. Foliar NH4-N concentrations in transgenic plants did not change after treatment. Extremely low temperatures in the third ten-day period of October 2014 revealed differences in freeze tolerance between the lines obtained from Pt of f2 aspen genotypes. Stable expression of the bar gene after overwintering outdoors was confirmed by RT-PCR. On the basis of the tests, four transgenic aspen lines were selected. The bar gene could be used for retransformation of transgenic forest trees expressing valuable traits, such as increased productivity.

  9. Kombucha fermentation test used for various types of herbal teas

    Science.gov (United States)

    Novi Primiani, C.; Pujiati; Mumtahanah, Mahda; Ardhi, Waskitho

    2018-05-01

    Tea is a common drink in the community, the benefits of tea can be improved by processing fermented tea called kombucha. Kombucha is a refreshing drink made from tea water plus sugar, obtained through the fermentation process by acetic acid bacteria and fungi, is consumed for its health benefits. The common Kombucha starter is called SCOOBY (Simbyotic of Bacteri and Yeast). Kombucha research using herbal tea is very rarely done, it is necessary kombucha research using a variety of herbal teas to determine the quality of its inhibitory power against bacteria and its quality compared with kombucha berkomposisi tea Camelia sinensis in general. The purpose of this research was to know kombucha quality with ph parameter, thickness of nata, total acid and its inhibitory power to Escherchia coli and Staphylococcus aureus bacteria. This research used Randomized Block Design (RAK) method using 1 tea type treatment, with 3 replications. The first type of green tea (P1), roselle tea (P2), mangosteen peel tea (P3), soursop leaf tea (P4), moringa leaf tea (P5) and yellow leaf tea (P6), so there are 18 treatment combinations. Based on statistical analysis, there was influence of tea type to kombucha quality. Treatments of P1 and P2 were found to have an optimum and significant effect for kombucha. the results in level of acidity [pH] on green tea (P1) was 3.05, nata thickness of 4.63 and total acid of 0.69. Acidity in roselle tea (P2) was 2.86, nata thickness of 3.83, and total acid of 0.71. While the lowest quality was found in the treatment of mangosteen peel (P3) tea with pH 2.57, nata thickness of 0.35, and total acid of 0.79.

  10. Panitumumab and pegylated liposomal doxorubicin in platinum-resistant epithelial ovarian cancer with KRAS wild-type

    DEFF Research Database (Denmark)

    Steffensen, Karina Dahl; Waldstrøm, Marianne; Pallisgård, Niels

    2013-01-01

    OBJECTIVE: The increasing number of negative trials for ovarian cancer treatment has prompted an evaluation of new biologic agents, which in combination with chemotherapy may improve survival. The aim of this study was to investigate the response rate in platinum-resistant, KRAS wild-type ovarian...... cancer patients treated with pegylated liposomal doxorubicin (PLD) supplemented with panitumumab. PATIENTS AND METHODS: Major eligibility criteria were relapsed ovarian/fallopian/peritoneal cancer patients with platinum-resistant disease, measurable disease by GCIG CA125 criteria and KRAS wild-type...

  11. Differences in Muscle Activity During Cable Resistance Training Are Influenced by Variations in Handle Types.

    Science.gov (United States)

    Rendos, Nicole K; Heredia Vargas, Héctor M; Alipio, Taislaine C; Regis, Rebeca C; Romero, Matthew A; Signorile, Joseph F

    2016-07-01

    Rendos, NK, Heredia Vargas, HM, Alipio, TC, Regis, RC, Romero, MA, and Signorile, JF. Differences in muscle activity during cable resistance training are influenced by variations in handle types. J Strength Cond Res 30(7): 2001-2009, 2016-There has been a recent resurgence in the use of cable machines for resistance training allowing movements that more effectively simulate daily activities and sports-specific movements. By necessity, these devices require a machine/human interface through some type of handle. Considerable data from material handling, industrial engineering, and exercise training studies indicate that handle qualities, especially size and shape, can significantly influence force production and muscular activity, particularly of the forearm muscles, which affect the critical link in activities that require object manipulation. The purpose for this study was to examine the influence of three different handle conditions: standard handle (StandH), ball handle with the cable between the index and middle fingers (BallIM), and ball handle with the cable between the middle and ring fingers (BallMR), on activity levels (rmsEMG) of the triceps brachii lateral and long heads (TriHLat, TriHLong), brachioradialis (BR), flexor carpi radialis (FCR), extensor carpi ulnaris, and extensor digitorum (ED) during eight repetitions of standing triceps pushdown performed from 90° to 0° elbow flexion at 1.5 s per contractile stage. Handle order was randomized. No significant differences were seen for triceps or BR rmsEMG across handle conditions; however, relative patterns of activation did vary for the forearm muscles by handle condition, with more coordinated activation levels for the FCR and ED during the ball handle conditions. In addition, the rmsEMG for the ED was significantly higher during the BallIM than any other condition and during the BallMR than the StandH. These results indicate that the use of ball handles with the cable passing between different fingers

  12. Relative iron "overload" in offspring of patients with type 2 diabetes mellitus: a new component in the conundrum of insulin resistance syndrome?

    Science.gov (United States)

    Psyrogiannis, Agathoklis; Kyriazopoulou, Venetsana; Symeonidis, Argiris; Leotsinidis, Michalis; Vagenakis, Apostolos G

    2003-01-01

    There are a few reports suggesting that subtle disturbances of iron metabolism are frequently found in patients with type 2 diabetes (DM2), but it is not known if these disturbances precede or accompany the diabetic state. We investigated the serum iron indices in 41 offspring of DM2 parents (group I) with normal glucose tolerance, and in 49 offspring whose parents had no history of DM2 and were matched for sex, age, body mass index (BMI), waist to hip ratio (WHR) and blood pressure (group II). Serum iron, ferritin, total iron binding capacity (TIBC), transferrin saturation, serum triglycerides, cholesterol, Apo-B, high density lipoprotein (HDL) and glucose and insulin values during an oral glucose tolerance test were measured. Insulin resistance was assessed using the homeostasis model assessment (HOMA - Insuline resistence index-IRI). In comparison to controls (group II), the offspring of DM2 subjects (group I) had higher fasting serum triglycerides (mean +/- SD 2.25+/-2.08 vs. 1.6+/-0.8 mmol/L, pinsulin in the Area Under the Curve (204.7+/-140.8 v. 153.1 +/- 63.0 microU/ml, pinsulin resistance. Hence, the relative iron "overload" in offspring of type 2 diabetics is present along with insulin resistance and might worsen the hepatic insulin insensitivity already present in these patients.

  13. An evaluation of corrosion resistant alloys by field corrosion test in Japanese refuse incineration plants

    International Nuclear Information System (INIS)

    Kawahara, Yuuzou; Nakamura, Masanori; Shibuya, Eiichi; Yukawa, Kenichi

    1995-01-01

    As the first step for development of the corrosion resistant superheater tube materials of 500 C, 100 ata used in high efficient waste-to-energy plants, field corrosion tests of six conventional alloys were carried out at metal temperatures of 450 C and 550 C for 700 and 3,000 hours in four typical Japanese waste incineration plants. The test results indicate that austenitic alloys containing approximately 80 wt% [Cr+Ni] show excellent corrosion resistance. When the corrosive environment is severe, intergranular corrosion of 40∼200 microm depth occurs in stainless steel and high alloyed materials. It is confirmed quantitatively that corrosion behavior is influenced by environmental corrosion factors such as Cl concentration and thickness of deposits on tube surface, metal temperature, and flue gas temperature. The excellent corrosion resistance of high [Cr+Ni+Mo] alloys such as Alloy 625 is explained by the stability of its protective oxide, such that the time dependence of corrosion nearly obeys the parabolic rate law

  14. LecRK-V, an L-type lectin receptor kinase in Haynaldia villosa, plays positive role in resistance to wheat powdery mildew.

    Science.gov (United States)

    Wang, Zongkuan; Cheng, Jiangyue; Fan, Anqi; Zhao, Jia; Yu, Zhongyu; Li, Yingbo; Zhang, Heng; Xiao, Jin; Muhammad, Faheem; Wang, Haiyan; Cao, Aizhong; Xing, Liping; Wang, Xiue

    2018-01-01

    Plant sense potential microbial pathogen using pattern recognition receptors (PRRs) to recognize pathogen-associated molecular patterns (PAMPs). The Lectin receptor-like kinase genes (LecRKs) are involved in various cellular processes mediated by signal transduction pathways. In the present study, an L-type lectin receptor kinase gene LecRK-V was cloned from Haynaldia villosa, a diploid wheat relative which is highly resistant to powdery mildew. The expression of LecRK-V was rapidly up-regulated by Bgt inoculation and chitin treatment. Its transcript level was higher in the leaves than in roots, culms, spikes and callus. Single-cell transient overexpression of LecRK-V led to decreased haustorium index in wheat variety Yangmai158, which is powdery mildew susceptible. Stable transformation LecRK-V into Yangmai158 significantly enhanced the powdery mildew resistance at both seedling and adult stages. At seedling stage, the transgenic line was highly resistance to 18 of the tested 23 Bgt isolates, hypersensitive responses (HR) were observed for 22 Bgt isolates, and more ROS at the Bgt infection sites was accumulated. These indicated that LecRK-V confers broad-spectrum resistance to powdery mildew, and ROS and SA pathways contribute to the enhanced powdery mildew resistance in wheat. © 2017 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  15. Transmitted drug resistance and type of infection in newly diagnosed HIV-1 individuals in Honduras.

    Science.gov (United States)

    Murillo, Wendy; Paz-Bailey, Gabriela; Morales, Sonia; Monterroso, Edgar; Paredes, Mayte; Dobbs, Trudy; Parekh, Bharat S; Albert, Jan; Rivera, Ivette Lorenzana de

    2010-12-01

    Transmitted drug resistance (TDR) reduces the efficacy of antiretroviral treatment and is a public health concern. To gain insight in the epidemiology of TDR in Honduras by evaluating the amount of TDR in a representative sample of newly diagnosed individuals and by determining whether these are recent or established infections. Two hundred treatment-naïve, newly diagnosed HIV-positive individuals representing different population groups (general population, Garifunas ethnic group, female sex workers and men who have sex with men) and different geographic regions were enrolled during April 2004-April 2007. The HIV-1 pol gene was sequenced to identify drug-resistant mutations and TDR was scored as recommended by the WHO. Specimens were classified as recent or established infections using the BED assay. Among 200 samples analyzed from Honduran patients the prevalence of TDR was 7% (95% CI: 3.9-11.5%), 5% for non-nucleoside reverse transcriptase inhibitors (NNRTIs), 3% for nucleoside reverse transcriptase inhibitors (NRTIs) and 0.5% for protease inhibitors (PIs). Testing of these samples with the BED assay revealed that 12% of the specimens were associated with recent infections. TDR was significantly more common in specimens with recent infection (21%) than established infection (5%) (p=0.016). The prevalence of TDR in Honduras was moderate (7%). The percentage of specimens who were recently infected was low (12%), suggesting that late HIV diagnosis is common. The TDR prevalence was higher in recent than in established infections, which may indicate that TDR is increasing over time. The higher prevalence of NNRTI and NRTI mutations as compared to PI mutations is probably due to a broader and longer use of these drugs in Honduras. Copyright © 2010 Elsevier B.V. All rights reserved.

  16. Comparison of multilocus sequence typing, RAPD, and MALDI-TOF mass spectrometry for typing of β-lactam-resistant Klebsiella pneumoniae strains.

    Science.gov (United States)

    Sachse, Svea; Bresan, Stephanie; Erhard, Marcel; Edel, Birgit; Pfister, Wolfgang; Saupe, Angela; Rödel, Jürgen

    2014-12-01

    Extended spectrum of β-lactam (ESBL) resistance of Klebsiella pneumoniae has become an increasing problem in hospital infections. Typing of isolates is important to establish the intrahospital surveillance of resistant clones. In this study, the discriminatory potential of randomly amplified polymorphic DNA and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) analyses were compared with multilocus sequence typing (MLST) by using 17 β-lactam-resistant K. pneumoniae isolates of different genotypes. MLST alleles were distributed in 8 sequence types (STs). Among ESBL strains of the same ST, the presence of different β-lactamase genes was common. RAPD band patterns also revealed 8 types that corresponded to MLST-defined genotypes in 15 out of 17 cases. MALDI-TOF analysis could differentiate 5 clusters of strains. The results of this work show that RAPD may be usable as a rapid screening method for the intrahospital surveillance of K. pneumoniae, allowing a discrimination of clonally related strains. MALDI-TOF-based typing was not strongly corresponding to genotyping and warrants further investigation. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. A cost-effective smartphone-based antimicrobial susceptibility test reader for drug resistance testing (Conference Presentation)

    Science.gov (United States)

    Feng, Steve W.; Tseng, Derek; Di Carlo, Dino; Garner, Omai B.; Ozcan, Aydogan

    2017-03-01

    Antimicrobial susceptibility testing (AST) is commonly used for determining microbial drug resistance, but routine testing, which can significantly reduce the spread of multi-drug resistant organisms, is not regularly performed in resource-limited and field-settings due to technological challenges and lack of trained diagnosticians. We developed a portable cost-effective smartphone-based colorimetric 96-well microtiter plate (MTP) reader capable of automated AST without the need for a trained diagnostician. This system is composed of a smartphone used in conjunction with a 3D-printed opto-mechanical attachment, which holds a set of inexpensive light-emitting-diodes and fiber-optic cables coupled to the 96-well MTP for enabling the capture of the transmitted light through each well by the smartphone camera. Images of the MTP plate are captured at multiple exposures and uploaded to a local or remote server (e.g., a laptop) for automated processing/analysis of the results using a custom-designed smartphone application. Each set of images are combined to generate a high dynamic-range image and analyzed for well turbidity (indicative of bacterial growth), followed by interpretative analysis per plate to determine minimum inhibitory concentration (MIC) and drug susceptibility for the specific bacterium. Results are returned to the originating device within 1 minute and shown to the user in tabular form. We demonstrated the capability of this platform using MTPs prepared with 17 antibiotic drugs targeting Gram-negative bacteria and tested 82 patient isolate MTPs of Klebsiella pneumoniae, achieving well turbidity accuracy of 98.19%, MIC accuracy of 95.15%, and drug susceptibility interpretation accuracy of 99.06%, meeting the FDA defined criteria for AST.

  18. Irradiation tests of radiation resistance optical fibers for fusion diagnostic application

    Science.gov (United States)

    Kakuta, Tsunemi; Shikama, Tatsuo; Nishitani, Takeo; Yamamoto, Shin; Nagata, Shinji; Tsuchiya, Bun; Toh, Kentaro; Hori, Junichi

    2002-11-01

    To promote development of radiation-resistant core optical fibers, the ITER-EDA (International Thermonuclear Experimental Reactor-Engineering Design Activity) recommended carrying out international round-robin irradiation tests of optical fibers to establish a reliable database for their applications in the ITER plasma diagnostics. Ten developed optical fibers were irradiation-tested in a Co-60 gamma cell, a Japan Materials Testing Reactor (JMTR). Also, some of them were irradiation tested in a fast neutron irradiation facility of FNS (Fast Neutron Source), especially to study temperature dependence of neutron-associated irradiation effects. Included were several Japanese fluorine doped fibers and one Japanese standard fiber (purified and undoped silica core), as well as seven Russian fibers. Some of Russian fibers were drawn by Japanese manufactures from Russian made pre-form rods to study effects of manufacturing processes to radiation resistant properties. The present paper will describe behaviors of growth of radiation-induced optical transmission loss in the wavelength range of 350-1750nm. Results indicate that role of displacement damages by fast neutrons are very important in introducing permanent optical transmission loss. Spectra of optical transmission loss in visible range will depend on irradiation temperatures and material parameters of optical fibers.

  19. Standard test methods for performance characteristics of metallic bonded resistance strain gages

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1992-01-01

    1.1 The purpose of this standard is to provide uniform test methods for the determination of strain gauge performance characteristics. Suggested testing equipment designs are included. 1.2 Test Methods E 251 describes methods and procedures for determining five strain gauge parameters: Section Part I—General Requirements 7 Part II—Resistance at a Reference Temperature 8 Part III—Gauge Factor at a Reference Temperature 9 Part IV—Temperature Coefficient of Gauge Factor\t10 Part V—Transverse Sensitivity\t11 Part VI—Thermal Output\t12 1.3 Strain gauges are very sensitive devices with essentially infinite resolution. Their response to strain, however, is low and great care must be exercised in their use. The performance characteristics identified by these test methods must be known to an acceptable accuracy to obtain meaningful results in field applications. 1.3.1 Strain gauge resistance is used to balance instrumentation circuits and to provide a reference value for measurements since all data are...

  20. On-line irradiation testing of a Giant Magneto-Resistive (GMR) sensor

    Energy Technology Data Exchange (ETDEWEB)

    Olfert, J.; Luloff, B.; MacDonald, D.; Lumsden, R., E-mail: jeff.olfert@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada)

    2016-06-15

    Magneto-resistive sensors are rapidly gaining favour for magnetic field sensing applications owing to their high sensitivity, small size, and low cost. Their metallic, nonsemiconductor construction makes them excellent candidates for use in the harsh environments present in nuclear and space applications. In this work, a commercially available magneto-resistive sensor was irradiated up to a total gamma dose of 2 MGy (200 Mrad), and online testing was performed to monitor the sensor throughout the irradiation to detect any degradation. No significant evidence of degradation of the sensor characteristics was observed. A very small (< 1%) change in the bridge balance of the sensor as a function of accumulated dose was detected. (author)

  1. Methodic aspects of autoclave tests of compact samples on cyclic crack resistance

    International Nuclear Information System (INIS)

    Pokhmurskij, V.I.; Gnyp, I.P.; Popov, A.A.; Tarasyuk, G.P.; Dutsyak, I.Z.; Timonin, V.M.

    1984-01-01

    Laboratory autoclave LAKIM-25 was created for investigation of cyclic and static crack resistance of vessel materials of power plants under the conditions close to operation ones. It enables to investigate the cyclic crack resistance of standard samples of up to 25 mm thickness in water at 623 K and 18 MPa. The friction force changes during tests from 6.1 up to 6.4 kN, therefore it is necessary to correct regularly the force of sample loading, recording the s-n diagram on a drum of UMEh-10TM plant. The periodic record of loading diagram coincides with respect to time with the necessity of controlling the change of sample pliability during crack propagation

  2. Radiation Resistance Test of Wireless Sensor Node and the Radiation Shielding Calculation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Liqan; Sur, Bhaskar [Atomic Energy of Canada Limited, Ontario (Canada); Wang, Quan [University of Western Ontario, Ontario (Canada); Deng, Changjian [The University of Electronic Science and Technology, Chengdu (China); Chen, Dongyi; Jiang, Jin [Applied Physics Branch, Ontario (Korea, Republic of)

    2014-08-15

    A wireless sensor network (WSN) is being developed for nuclear power plants. Amongst others, ionizing radiation resistance is one essential requirement for WSN to be successful. This paper documents the work done in Chalk River Laboratories of Atomic Energy of Canada Limited (AECL) to test the resistance to neutron and gamma radiation of some WSN nodes. The recorded dose limit that the nodes can withstand before being damaged by the radiation is compared with the radiation environment inside a typical CANDU (CANada Deuterium Uranium) power plant reactor building. Shielding effects of polyethylene, cadmium and lead to neutron and gamma radiations are also analyzed using MCNP simulation. The shielding calculation can be a reference for the node case design when high dose rate or accidental condition (like Fukushima) is to be considered.

  3. High serum fasting peptide YY (3-36) is associated with obesity-associated insulin resistance and type 2 diabetes.

    Science.gov (United States)

    Ukkola, Olavi H; Puurunen, Veli-Pekka; Piira, Olli-Pekka; Niva, Jarkko T; Lepojärvi, E Samuli; Tulppo, Mikko P; Huikuri, Heikki V

    2011-10-10

    We studied whether serum fasting levels of active form of peptide YY (PYY), PYY(3-36), are associated with obesity and related phenotypes. The study population consisted of 428 patients with coronary artery disease and diagnosed type 2 diabetes and 440 patients with coronary artery disease but without evidence of diabetes from the ARTEMIS study. The patients were recruited from the consecutive series of patients undergoing coronary angiography in the Oulu University Hospital. The patients without diabetes underwent a 2-hour oral glucose tolerance test. PYY(3-36) levels were analyzed by human PYY(3-36) specific radioimmunoassay. Result suggested that when PYY(3-36) tertiles were considered, high serum fasting PYY(3-36) concentration was associated with high body mass index, waist circumference, hemoglobin A1c, fasting blood glucose, leptin, triglyceride (p for all p ≤ 0.001), serum insulin (p=0.013) and with a low high-density lipoprotein cholesterol (p=0.004) concentrations in the analyses adjusted for age, sex and study group. The link high PYY(3-36)-high insulin level was evident in subjects with normal glucose tolerance (pfasting glucose, impaired glucose tolerance and normal glucose tolerance (pfasting PYY(3-36) concentrations in type 2 diabetic subjects are high. Although high PYY(3-36) is strongly linked to obesity and associated insulin resistance, the relation between PYY(3-36) and type 2 diabetes is independent of body fatness. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Mice with a targeted deletion of the type 2 deiodinase are insulin resistant and susceptible to diet induced obesity.

    Directory of Open Access Journals (Sweden)

    Alessandro Marsili

    Full Text Available The type 2 iodothyronine deiodinase (D2 converts the pro-hormone thyroxine into T3 within target tissues. D2 is essential for a full thermogenic response of brown adipose tissue (BAT, and mice with a disrupted Dio2 gene (D2KO have an impaired response to cold. BAT is also activated by overfeeding.After 6-weeks of HFD feeding D2KO mice gained 5.6% more body weight and had 28% more adipose tissue. Oxygen consumption (V0(2 was not different between genotypes, but D2KO mice had an increased respiratory exchange ratio (RER, suggesting preferential use of carbohydrates. Consistent with this, serum free fatty acids and β-hydroxybutyrate were lower in D2KO mice on a HFD, while hepatic triglycerides were increased and glycogen content decreased. Neither genotype showed glucose intolerance, but D2KO mice had significantly higher insulin levels during GTT independent of diet. Accordingly, during ITT testing D2KO mice had a significantly reduced glucose uptake, consistent with insulin resistance. Gene expression levels in liver, muscle, and brown and white adipose tissue showed no differences that could account for the increased weight gain in D2KO mice. However, D2KO mice have higher PEPCK mRNA in liver suggesting increased gluconeogenesis, which could also contribute to their apparent insulin resistance.We conclude that the loss of the Dio2 gene has significant metabolic consequences. D2KO mice gain more weight on a HFD, suggesting a role for D2 in protection from diet-induced obesity. Further, D2KO mice appear to have a greater reliance on carbohydrates as a fuel source, and limited ability to mobilize and to burn fat. This results in increased fat storage in adipose tissue, hepatic steatosis, and depletion of liver glycogen in spite of increased gluconeogenesis. D2KO mice are also less responsive to insulin, independent of diet-induced obesity.

  5. Identification and molecular characterization of Van A-type vancomycin-resistant Enterococcus faecalis in Northeast of Brazil

    Directory of Open Access Journals (Sweden)

    Marinalda Anselmo Vilela

    2006-11-01

    Full Text Available The isolation of vancomycin resistant enterococci (VRE in Brazil has rapidly increased, following the world wide tendency. We report in the present study the first isolation of vancomycin resistant Enterococcus faecalis (VRE in the Northeast of Brazil. The four VRE isolates were characterized for antimicrobial susceptibility, genotypic typing by macro restriction of chromosomal DNA followed by pulsed-field gel electrophoresis and for characterization of the Tn1546-like element and plasmid contents. The isolates showed resistance to multiple antibiotics and a single genotype profile, suggesting the dissemination of a single clone among the patients. Tn1546 associated to genetic elements as plasmids shows the importance of infection control measures to avoid the spreading of glycopetide resistance by conjugative transfer of VanA elements.

  6. Neisseria gonorrhoeae molecular typing for understanding sexual networks and antimicrobial resistance transmission: A systematic review.

    Science.gov (United States)

    Town, Katy; Bolt, Hikaru; Croxford, Sara; Cole, Michelle; Harris, Simon; Field, Nigel; Hughes, Gwenda

    2018-06-01

    Neisseria gonorrhoeae (NG) is a significant global public health concern due to rising diagnoses rates and antimicrobial resistance. Molecular combined with epidemiological data have been used to understand the distribution and spread of NG, as well as relationships between cases in sexual networks, but the public health value gained from these studies is unclear. We conducted a systematic review to examine how molecular epidemiological studies have informed understanding of sexual networks and NG transmission, and subsequent public health interventions. Five research databases were systematically searched up to 31st March 2017 for studies that used sequence-based DNA typing methods, including whole genome sequencing, and linked molecular data to patient-level epidemiological data. Data were extracted and summarised to identify common themes. Of the 49 studies included, 82% used NG Multi-antigen Sequence Typing. Gender and sexual orientation were commonly used to characterise sexual networks that were inferred using molecular clusters; clusters predominantly of one patient group often contained a small number of isolates from other patient groups. Suggested public health applications included using these data to target interventions at specific populations, confirm outbreaks, and inform partner management, but these were mainly untested. Combining molecular and epidemiological data has provided insight into sexual mixing patterns, and dissemination of NG, but few studies have applied these findings to design or evaluate public health interventions. Future studies should focus on the application of molecular epidemiology in public health practice to provide evidence for how to prevent and control NG. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. A herbicide-resistant ACCase 1781 Setaria mutant shows higher fitness than wild type.

    Science.gov (United States)

    Wang, T; Picard, J C; Tian, X; Darmency, H

    2010-10-01

    It is often alleged that mutations conferring herbicide resistance have a negative impact on plant fitness. A mutant ACCase1781 allele endowing resistance to the sethoxydim herbicide was introgressed from a resistant green foxtail (Setaria viridis (L.) Beauv) population into foxtail millet (S. italica (L.) Beauv.). (1) Better and earlier growth of resistant plants was observed in a greenhouse cabinet. (2) Resistant plants of the advanced BC7 backcross generation showed more vigorous juvenile growth in the field, earlier flowering, more tillers and higher numbers of grains than susceptible plants did, especially when both genotypes were grown in mixture, but their seeds were lighter than susceptible seeds. (3) Field populations originating from segregating hybrids had the expected allele frequencies under normal growth conditions, but showed a genotype shift toward an excess of homozygous resistant plants within 3 years in stressful conditions. Lower seed size, lower germination rate and perhaps unexplored differences in seed longevity and predation could explain how the resistant plants have the same field fitness over the whole life cycle as the susceptible ones although they produce more seeds. More rapid growth kinetics probably accounted for higher fitness of the resistant plants in adverse conditions. The likelihood of a linkage with a beneficial gene is discussed versus the hypothesis of a pleiotropic effect of the ACCase resistance allele. It is suggested that autogamous species like Setaria could not develop a resistant population without the help of a linkage with a gene producing a higher fitness.

  8. HIV type-1 genotypic resistance profiles in vertically infected patients from Argentina reveal an association between K103N+L100I and L74V mutations.

    Science.gov (United States)

    Aulicino, Paula C; Rocco, Carlos A; Mecikovsky, Debora; Bologna, Rosa; Mangano, Andrea; Sen, Luisa

    2010-01-01

    Patterns and pathways of HIV type-1 (HIV-1) antiretroviral (ARV) drug resistance-associated mutations in clinical isolates are conditioned by ARV history and factors such as viral subtype and fitness. Our aim was to analyse the frequency and association of ARV drug resistance mutations in a group of long-term vertically infected patients from Argentina. Plasma samples from 71 patients (38 children and 33 adolescents) were collected for genotypic HIV-1 ARV resistance testing during the period between February 2006 and October 2008. Statistically significant pairwise associations between ARV resistance mutations in pol, as well as associations between mutations and drug exposure, were identified using Fisher's exact tests with Bonferroni and false discovery rate corrections. Phylogenetic analyses were performed for subtype assignment. In protease (PR), resistance-associated mutations M46I/L, I54M/L/V/A/S and V82A/F/T/S/M/I were associated with each other and with minor mutations at codons 10, 24 and 71. Mutations V82A/F/T/S/M/I were primarily selected by the administration of ritonavir (RTV) in an historical ARV regimen. In reverse transcriptase, thymidine analogue mutation (TAM)1 profile was more common than TAM2. The non-nucleoside K103N+L100I mutations were observed at high frequency (15.5%) and were significantly associated with the nucleoside mutation L74V in BF recombinants. Associations of mutations at PR sites reflect the frequent use of RTV at an early time in this group of patients and convergent resistance mechanisms driven by the high exposure to protease inhibitors, as well as local HIV-1 diversity. The results provide clinical evidence of a molecular interaction between K103N+L100I and L74V mutations at the reverse transcriptase gene in vivo, limiting the future use of second-generation non-nucleoside reverse transcriptase inhibitors such as etravirine.

  9. Spatial fluxes and energy distributions of reactor fast neutrons in two types of heat resistant concretes

    International Nuclear Information System (INIS)

    Akki, T.S.; Benayad, S.A.; Megahid, R.M.

    1992-01-01

    Measurements have been carried out to study the spatial fluxes and energy distributions of reactor fast neutrons transmitted through two types of heat resistant concretes, serpentine concrete and magnetic lemonite concrete. The physical, chemical and mechanical properties of these concretes were checked by well known techniques. In addition, the effect of heating at temperatures up to 500deg C on the crystaline water content was checked by the method of differential thermal analysis. Measurements were performed using a collimated beam of reactor neutrons emitted from a 10 MW research reactor. The neutron spectra transmitted through concrete barriers of different thickness were measured by a scintillation spectrometer with NE-213 liquid organic scintillator. Discrimination against undesired pulses due to gamma-rays was achieved by a method based on pulse shape discrimination technique. The operating principle of this technique is based on the comparison of two weighted time integrals of the detector signal. The measured pulse amplitude distribution was converted to neutron energy distribution by a computational code based on double differentiation technique. The spectrometer workability and the accuracy of the unfolding technique were checked by measuring the neutron spectra of neutrons from Pu-α-Be and 252 Cf neutron sources. The obtained neutron spectra for the two concretes were used to derive the total cross sections for neutrons of different energies. (orig.)

  10. Comparative study of telmisartan with pioglitazone on insulin resistance in type 2 diabetic mice

    International Nuclear Information System (INIS)

    Khan, A.; Qayyum, A.; Khan, B.T.

    2017-01-01

    Objective: To evaluate and compare the effects of telmisartan and pioglitazone on peripheral insulin resistance in diabetic mice. Study Design: Randomized control trail. Place and Duration of Study: National Institute of Health, Islamabad and pharmacology dept, Army Medical College, from 17th March to 17th June 2014. Material and Methods: Twenty four BALB/c mice, both male and female, of 35 to 40 grams were used for this study. Animals were randomly divided into four groups. Two were taken as control groups, one was normal control and the other was diabetic control. Two were taken as interventional groups and received either pioglitazone or telmisartan for four weeks after induction of diabetes. Results: After treatment, pioglitazone reduced all the biochemical parameters significantly when compared with diabetic control. Negative correlation between glucose and insulin was changed into positive correlation (r-value, 0.92) with significant p-value (0.015) in pioglitazone treated group, while telmisartan only managed to convert a negative correlation between insulin and glucose into statistically non-significant positive. Conclusion: Telmisartan although reduces glucose levels and improves beta cell mass but the effect is statistically non-significant as compared to pioglitazone. In hypertensive type 2 diabetics a combination of these two drugs may help in reducing the dose of pioglitazone and consequently the cardiovascular adverse effects of pioglitazone. (author)

  11. Resistant Hypertension, Time-Updated Blood Pressure Values and Renal Outcome in Type 2 Diabetes Mellitus.

    Science.gov (United States)

    Viazzi, Francesca; Piscitelli, Pamela; Ceriello, Antonio; Fioretto, Paola; Giorda, Carlo; Guida, Pietro; Russo, Giuseppina; De Cosmo, Salvatore; Pontremoli, Roberto

    2017-09-22

    Apparent treatment resistant hypertension (aTRH) is highly prevalent in patients with type 2 diabetes mellitus (T2D) and entails worse cardiovascular prognosis. The impact of aTRH and long-term achievement of recommended blood pressure (BP) values on renal outcome remains largely unknown. We assessed the role of aTRH and BP on the development of chronic kidney disease in patients with T2D and hypertension in real-life clinical practice. Clinical records from a total of 29 923 patients with T2D and hypertension, with normal baseline estimated glomerular filtration rate and regular visits during a 4-year follow-up, were retrieved and analyzed. The association between time-updated BP control (ie, 75% of visits with BP hypertension. BP control is not associated with a more-favorable renal outcome in aTRH. The relationship between time-updated BP and renal function seems to be J-shaped, with optimal systolic BP values between 120 and 140 mm Hg. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  12. Ultra-low specific on-resistance SOI double-gate trench-type MOSFET

    International Nuclear Information System (INIS)

    Lei Tianfei; Luo Xiaorong; Ge Rui; Chen Xi; Wang Yuangang; Yao Guoliang; Jiang Yongheng; Zhang Bo; Li Zhaoji

    2011-01-01

    An ultra-low specific on-resistance (R on,sp ) silicon-on-insulator (SOI) double-gate trench-type MOSFET (DG trench MOSFET) is proposed. The MOSFET features double gates and an oxide trench: the oxide trench is in the drift region, one trench gate is inset in the oxide trench and one trench gate is extended into the buried oxide. Firstly, the double gates reduce R on,sp by forming dual conduction channels. Secondly, the oxide trench not only folds the drift region, but also modulates the electric field, thereby reducing device pitch and increasing the breakdown voltage (BV). ABV of 93 V and a R on,sp of 51.8 mΩ·mm 2 is obtained for a DG trench MOSFET with a 3 μm half-cell pitch. Compared with a single-gate SOI MOSFET (SG MOSFET) and a single-gate SOI MOSFET with an oxide trench (SG trench MOSFET), the R on,sp of the DG trench MOSFET decreases by 63.3% and 33.8% at the same BV, respectively. (semiconductor devices)

  13. Enhanced Molecular Typing of Treponema pallidum subspecies pallidum Strains From 4 Italian Hospitals Shows Geographical Differences in Strain Type Heterogeneity, Widespread Resistance to Macrolides, and Lack of Mutations Associated With Doxycycline Resistance.

    Science.gov (United States)

    Giacani, Lorenzo; Ciccarese, Giulia; Puga-Salazar, Christian; Dal Conte, Ivano; Colli, Laura; Cusini, Marco; Ramoni, Stefano; Delmonte, Sergio; DʼAntuono, Antonietta; Gaspari, Valeria; Drago, Francesco

    2018-04-01

    Although syphilis rates have been relatively high in Italy for more than 15 years, no data on the molecular types of Treponema pallidum subspecies pallidum circulating in this country are yet available. Likewise, no data on how widespread is resistance to macrolide or tetracycline antibiotics in these strains exist. Such data would, however, promote comprehensive studies on the molecular epidemiology of syphilis infections in Italy and inform future interventions aiming at syphilis control in this and other European countries. Swabs from oral, genital, cutaneous, or anal lesions were obtained from 60 syphilis patients attending dermatology clinics in Milan, Turin, Genoa, and Bologna. Molecular typing of T. pallidum DNA was performed to provide a snapshot of the genetic diversity of strains circulating in Northern Italy. Samples were also screened for mutations conferring resistance to macrolides and tetracyclines. T. pallidum DNA was detected in 88.3% (53/60) of the specimens analyzed. Complete and partial T. pallidum typing data were obtained for 77.3% (41/53) and 15.0% (8/53) of samples, respectively, whereas 4 samples could not be typed despite T. pallidum DNA being detected. The highest strain type heterogeneity was seen in samples from Bologna and Milan, followed by Genoa. Minimal diversity was detected in samples from Turin, despite the highest number of typeable samples collected there. Resistance to macrolides was detected in 94.3% (50/53) of the strains, but no known mutations associated with tetracycline resistance were found. Genetic diversity among T. pallidum strains circulating in Northern Italy varies significantly among geographical areas regardless of physical distance. Resistance to macrolides is widespread.

  14. Combination of multilocus sequence typing and pulsed-field gel electrophoresis reveals an association of molecular clonality with the emergence of extensive-drug resistance (XDR) in Salmonella.

    Science.gov (United States)

    Cao, Yongzhong; Shen, Yongxiu; Cheng, Lingling; Zhang, Xiaorong; Wang, Chao; Wang, Yan; Zhou, Xiaohui; Chao, Guoxiang; Wu, Yantao

    2018-03-01

    Salmonellae is one of the most important foodborne pathogens and becomes resistant to multiple antibiotics, which represents a significant challenge to food industry and public health. However, a molecular signature that can be used to distinguish antimicrobial resistance profile, particularly multi-drug resistance or extensive-drug resistance (XDR). In the current study, 168 isolates from the chicken and pork production chains and ill chickens were characterized by serotyping, antimicrobial susceptibility test, multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE). The results showed that these isolates belonged to 13 serotypes, 14 multilocus sequence types (STs), 94 PFGE genotypes, and 70 antimicrobial resistant profiles. S. Enteritidis, S. Indiana, and S. Derby were the predominant serotypes, corresponding to the ST11, ST17, and ST40 clones, respectively and the PFGE Cluster A, Cluster E, and Cluster D, respectively. Among the ST11-S. Enteritidis (Cluster A) and the ST40-S. Derby (Cluster D) clones, the majority of isolates were resistant to 4-8 antimicrobial agents, whereas in the ST17S. Indiana (Cluster E) clone, isolates showed extensive-drug resistance (XDR) to 9-16 antimicrobial agents. The bla TEM-1-like gene was prevalent in the ST11 and ST17 clones corresponding to high ampicillin resistance. The bla TEM-1-like , bla CTX-M , bla OXA-1-like , sul1, aaC4, aac(6')-1b, dfrA17, and floR gene complex was highly prevalent among isolates of ST17, corresponding to an XDR phenotype. These results demonstrated the association of the resistant phenotypes and genotypes with ST clone and PFGE cluster. Our results also indicated that the newly identified gene complex comprising bla TEM-1-like , bla CTX-M , bla OXA-1-like , sul1, aaC4, aac(6')-1b, dfrA17, and floR, was responsible for the emergence of the ST17S. Indiana XDR clone. ST17 could be potentially used as a molecular signature to distinguish S. Indiana XDR clone. Copyright © 2017

  15. Evaluation of the Internal and Borehole Resistances during Thermal Response Tests and Impact on Ground Heat Exchanger Design

    Directory of Open Access Journals (Sweden)

    Louis Lamarche

    2017-12-01

    Full Text Available The main parameters evaluated with a conventional thermal response test (TRT are the subsurface thermal conductivity surrounding the borehole and the effective borehole thermal resistance, when averaging the inlet and outlet temperature of a ground heat exchanger with the arithmetic mean. This effective resistance depends on two resistances: the 2D borehole resistance (Rb and the 2D internal resistance (Ra which is associated to the short-circuit effect between pipes in the borehole. This paper presents a field method to evaluate these two components separately. Two approaches are proposed. In the first case, the temperature at the bottom of the borehole is measured at the same time as the inlet and outlet temperatures as done in a conventional TRT. In the second case, different flow rates are used during the experiment to infer the internal resistance. Both approaches assumed a predefined temperature profile inside the borehole. The methods were applied to real experimental tests and compared with numerical simulations. Interesting results were found by comparison with theoretical resistances calculated with the multipole method. The motivation for this work is evidenced by analyzing the impact of the internal resistance on a typical geothermal system design. It is shown to be important to know both resistance components to predict the variation of the effective resistance when the flow rate and the height of the boreholes are changed during the design process.

  16. Plasmin in urine from patients with type 2 diabetes and treatment-resistant hypertension activates ENaC in vitro

    DEFF Research Database (Denmark)

    Buhl, Kristian B; Stolzenburg Oxlund, Christina; Friis, Ulla G

    2014-01-01

    diabetes mellitus (T2DM) and treatment-resistant hypertension excrete plasmin(ogen) in urine in proportion to albumin and that plasmin confers to urine the ability to activate ENaC. METHOD:: Patients (n = 113) with T2DM and resistant hypertension, defined as systolic blood pressure (SBP) more than 130 mm...... of plasmin in preurine may inappropriately activate ENaC in patients with type 2 diabetes and microalbuminuria. This may contribute to treatment-resistant hypertension.......BACKGROUND:: Aberrant filtration of plasminogen from plasma and subsequent activation to plasmin in the urinary space may activate proteolytically the epithelial sodium channel, ENaC. In conditions with chronic albuminuria, this may cause hypertension. It was hypothesized that patients with type 2...

  17. Cost-effectiveness of HIV drug resistance testing to inform switching to second line antiretroviral therapy in low income settings

    DEFF Research Database (Denmark)

    Phillips, Andrew; Cambiano, Valentina; Nakagawa, Fumiyo

    2014-01-01

    BACKGROUND: To guide future need for cheap resistance tests for use in low income settings, we assessed cost-effectiveness of drug resistance testing as part of monitoring of people on first line ART - with switching from first to second line ART being conditional on NNRTI drug resistance mutations...... being identified. METHODS: An individual level simulation model of HIV transmission, progression and the effect of ART which accounts for adherence and resistance development was used to compare outcomes of various potential monitoring strategies in a typical low income setting in sub-Saharan Africa....... Underlying monitoring strategies considered were based on clinical disease, CD4 count or viral load. Within each we considered a strategy in which no further measures are performed, one with a viral load measure to confirm failure, and one with both a viral load measure and a resistance test. Predicted...

  18. Type I Shell Galaxies as a Test of Gravity Models

    Energy Technology Data Exchange (ETDEWEB)

    Vakili, Hajar; Rahvar, Sohrab [Department of Physics, Sharif University of Technology, P.O. Box 11365-9161, Tehran (Iran, Islamic Republic of); Kroupa, Pavel, E-mail: vakili@physics.sharif.edu [Helmholtz-Institut für Strahlen-und Kernphysik, Universität Bonn, Nussallee 14-16, D-53115 Bonn (Germany)

    2017-10-10

    Shell galaxies are understood to form through the collision of a dwarf galaxy with an elliptical galaxy. Shell structures and kinematics have been noted to be independent tools to measure the gravitational potential of the shell galaxies. We compare theoretically the formation of shells in Type I shell galaxies in different gravity theories in this work because this is so far missing in the literature. We include Newtonian plus dark halo gravity, and two non-Newtonian gravity models, MOG and MOND, in identical initial systems. We investigate the effect of dynamical friction, which by slowing down the dwarf galaxy in the dark halo models limits the range of shell radii to low values. Under the same initial conditions, shells appear on a shorter timescale and over a smaller range of distances in the presence of dark matter than in the corresponding non-Newtonian gravity models. If galaxies are embedded in a dark matter halo, then the merging time may be too rapid to allow multi-generation shell formation as required by observed systems because of the large dynamical friction effect. Starting from the same initial state, the observation of small bright shells in the dark halo model should be accompanied by large faint ones, while for the case of MOG, the next shell generation patterns iterate with a specific time delay. The first shell generation pattern shows a degeneracy with the age of the shells and in different theories, but the relative distance of the shells and the shell expansion velocity can break this degeneracy.

  19. Impact determination of strength and resistance training on Glycoside hemoglobin and blood sugar on patients with type II diabetes”

    OpenAIRE

    Bahman Hasanvand; Kobra Karami; Abdollah Khodadi; Mehdi Valipour

    2011-01-01

    Background : This study determined the impact of strength and resistance training on hemoglobin Glycoside and glucose in type II diabetic patients in Khorramabad in 2009. Materials and Methods: This quasi-experimental study was carried out on 30 men with type 2 diabetes referred to laboratories in Khorramabad, selected by screening and interview and purposeful sampling . After the subjects completed questionnaires of medical records and written consent, they were randomly divided into th...

  20. [Description of Mycobacterium tuberculosis mutations conferring resistance to rifampicin and isoniazid detected by GenoType® MTBDRplus V.2 in Colombia].

    Science.gov (United States)

    Llerena, Claudia; Medina, Raquel

    2017-01-24

    The GenoType®MTBDRplusV.2 assay is a molecular technique endorsed by the World Health Organization and the Pan American Health Organization that allows for the identification of the Mycobacterium tuberculosis complex and the detection of mutations in the rpoβ gene for rifampicin resistance, and katG and inhA genes for isoniazid resistance. Due to the genetic variability in the circulating strains around the world, the national tuberculosis control programs should assess the performance of these new diagnostic technologies and their use under program conditions as rapid tests. To describe the mutations identified by the GenoType®MTBDRplusV.2 assay in pulmonary samples and Mycobacterium tuberculosis isolates in the Laboratorio Nacional de Referencia of the Instituto Nacional de Salud in 2014. We conducted a retrospective, descriptive study to detect the expression of inhA, KatG and rpoβ genes, responsible for resistence against isoniazid and rifampicin using the GenoType® MTBDRplus V.2 assay in 837 samples and isolates from tuberculosis cases. Several mutations in the rpoβ gene were identified. Ser531Leu was the most frequent (36.6%) followed by Asp516Val (21.6%), while Ser315Thr1 was the most frequent mutation in the katG gene (91.9%). We were able to identify different mutations present in MDR-TB strains in the country, with frequencies similar to those reported in other countries in the South American region.

  1. Insulin resistance in patients with type 1 diabetes assessed by glucose clamp studies: systematic review and meta-analysis

    NARCIS (Netherlands)

    Donga, Esther; Dekkers, Olaf M.; Corssmit, Eleonora P. M.; Romijn, Johannes A.

    2015-01-01

    Objective: The aim of this study was to perform a systematic review and meta-analysis on insulin resistance in adult patients with type 1 diabetes mellitus compared to healthy controls, assessed by hyperinsulinemic euglycemic clamp studies. Design and methods: We conducted a systematic search of

  2. Role of macrophage migration inhibitory factor in obesity, insulin resistance, type 2 diabetes, and associated hepatic co-morbidities

    NARCIS (Netherlands)

    Morrison, M.C.; Kleemann, Robert

    2015-01-01

    Obesity is associated with a chronic low-grade inflammatory state that drives the -development of obesity-related co-morbidities such as insulin resistance/type 2 diabetes, non-alcoholic fatty liver disease (NAFLD), and cardiovascular disease. This metabolic inflammation is thought to originate

  3. Complete Genome Sequences of Isolates of Enterococcus faecium Sequence Type 117, a Globally Disseminated Multidrug-Resistant Clone

    Science.gov (United States)

    Tedim, Ana P.; Lanza, Val F.; Manrique, Marina; Pareja, Eduardo; Ruiz-Garbajosa, Patricia; Cantón, Rafael; Baquero, Fernando; Tobes, Raquel

    2017-01-01

    ABSTRACT The emergence of nosocomial infections by multidrug-resistant sequence type 117 (ST117) Enterococcus faecium has been reported in several European countries. ST117 has been detected in Spanish hospitals as one of the main causes of bloodstream infections. We analyzed genome variations of ST117 strains isolated in Madrid and describe the first ST117 closed genome sequences. PMID:28360174

  4. Typing of vancomycin-resistant enterococci with MALDI-TOF mass spectrometry in a nosocomial outbreak setting

    DEFF Research Database (Denmark)

    Holzknecht, B J; Dargis, R; Pedersen, M

    2018-01-01

    OBJECTIVES: To investigate the usefulness of matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) typing as a first-line epidemiological tool in a nosocomial outbreak of vancomycin-resistant Enterococcus faecium (VREfm). METHODS: Fifty-five VREfm isolates...

  5. Novel types of staphylococcal cassette chromosome mec elements identified in clonal complex 398 methicillin-resistant Staphylococcus aureus strains.

    NARCIS (Netherlands)

    Li, S.; Skov, R.L.; Han, X.; Larsen, A.R.; Larsen, J.; Sorum, M.; Wulf, M.; Voss, A.; Hiramatsu, K.; Ito, T.

    2011-01-01

    The structures of staphylococcal cassette chromosome mec (SCCmec) elements carried by 31 clonal complex 398 (CC398) methicillin-resistant Staphylococcus aureus (MRSA) strains isolated from the participants at a conference were analyzed. The SCCmecs were classified into novel types, namely, IX, X,

  6. YKL-40, a biomarker of inflammation, is elevated in patients with type 2 diabetes and is related to insulin resistance

    DEFF Research Database (Denmark)

    Rathcke, C N; Johansen, J S; Vestergaard, H

    2006-01-01

    YKL-40 participates in inflammatory states and vascular processes, which implies that comparison can be made with other inflammatory markers associated with insulin resistance and type 2 diabetes (T2D). In the present study levels of plasma YKL-40 and serum hsCRP were evaluated in patients with T2D....

  7. Comparing Whole-Genome Sequencing with Sanger Sequencing for spa Typing of Methicillin-Resistant Staphylococcus aureus

    DEFF Research Database (Denmark)

    Bartels, Mette Damkjaer; Petersen, Andreas; Worning, Peder

    2014-01-01

    spa typing of methicillin-resistant Staphylococcus aureus (MRSA) has traditionally been done by PCR amplification and Sanger sequencing of the spa repeat region. At Hvidovre Hospital, Denmark, whole-genome sequencing (WGS) of all MRSA isolates has been performed routinely since January 2013, and ...

  8. Establishment of new transmissible and drug-sensitive human immunodeficiency virus type 1 wild types due to transmission of nucleoside analogue-resistant virus.

    Science.gov (United States)

    de Ronde, A; van Dooren, M; van Der Hoek, L; Bouwhuis, D; de Rooij, E; van Gemen, B; de Boer, R; Goudsmit, J

    2001-01-01

    Sequence analysis of human immunodeficiency virus type 1 (HIV-1) from 74 persons with acute infections identified eight strains with mutations in the reverse transcriptase (RT) gene at positions 41, 67, 68, 70, 215, and 219 associated with resistance to the nucleoside analogue zidovudine (AZT). Follow-up of the fate of these resistant HIV-1 strains in four newly infected individuals revealed that they were readily replaced by sensitive strains. The RT of the resistant viruses changed at amino acid 215 from tyrosine (Y) to aspartic acid (D) or serine (S), with asparagine (N) as a transient intermediate, indicating the establishment of new wild types. When we introduced these mutations and the original threonine (T)-containing wild type into infectious molecular clones and assessed their competitive advantage in vitro, the order of fitness was in accord with the in vivo observations: 215Y types with D, S, or N residues at position 215 may be warranted in order to estimate the threat to long-term efficacy of regimens including nucleoside analogues.

  9. Variation in PPARG is associated with longitudinal change in insulin resistance in Mexican Americans at risk for type 2 diabetes.

    Science.gov (United States)

    Black, Mary Helen; Wu, Jun; Takayanagi, Miwa; Wang, Nan; Taylor, Kent D; Haritunians, Talin; Trigo, Enrique; Lawrence, Jean M; Watanabe, Richard M; Buchanan, Thomas A; Xiang, Anny H

    2015-03-01

    Peroxisome proliferator-activated receptor gamma (PPARG) is a susceptibility locus for type 2 diabetes mellitus (T2DM). Although cross-sectional associations have been reported, primarily for Pro12Ala, few longitudinal studies in nondiabetic populations have been conducted. This study aimed to examine whether and to what extent variation in PPARG is associated with longitudinal changes in anthropometric and metabolic traits in Mexican Americans at risk for T2DM. Subjects were participants of BetaGene, a family-based study of obesity, insulin resistance, and β-cell function, who completed a baseline and follow-up study visit (n = 378; mean followup, 4.6 ± 1.5 y). Phenotypes included body fat assessed by dual-energy x-ray absorptiometry; insulin sensitivity (SI), acute insulin response, and β-cell function (disposition index; DI) were estimated from iv glucose tolerance tests with Minimal Model analysis. Eighteen tag single nucleotide polymorphisms (SNPs) capturing variation in a 156-kb region surrounding PPARG were tested for association with changes in longitudinal traits. P-values were Bonferroni-corrected for multiple testing. Six SNPs (rs2972164, rs11128598, rs17793951, rs1151996, rs1175541, rs3856806) were significantly associated with rate of change in SI after adjustment for age, sex, and body fat percentage, but not with changes in adiposity. rs17793951 also had a significant effect on change in DI over time. Association between rs1175541 and change in SI varied by changes in adiposity such that only carriers of the minor allele who reduced body fat over followup improved SI. rs1306470 (captured Pro12Ala, r(2) = 0.9) was not associated with rates of change in any traits and its effects were not modified by changes in adiposity. Variation in PPARG, but not Pro12Ala, contributes to declining SI and concomitant deterioration in β-cell function in Mexican Americans at risk for T2DM.

  10. Long-term chloride migration coefficient in slag cement-based concrete and resistivity as an alternative test method

    NARCIS (Netherlands)

    van Noort, R.; Hunger, M.; Spiesz, P.R.

    2016-01-01

    This article reports on investigations of the resistivity and chloride migration coefficient (DRCM) obtained in the accelerated Rapid Chloride Migration test for slag cement-based concretes. Determinations of the resistivity and DRCM were performed on 47 different concrete compositions, up to the

  11. Reliability of Strength Testing using the Advanced Resistive Exercise Device and Free Weights

    Science.gov (United States)

    English, Kirk L.; Loehr, James A.; Laughlin, Mitzi A.; Lee, Stuart M. C.; Hagan, R. Donald

    2008-01-01

    The Advanced Resistive Exercise Device (ARED) was developed for use on the International Space Station as a countermeasure against muscle atrophy and decreased strength. This investigation examined the reliability of one-repetition maximum (1RM) strength testing using ARED and traditional free weight (FW) exercise. Methods: Six males (180.8 +/- 4.3 cm, 83.6 +/- 6.4 kg, 36 +/- 8 y, mean +/- SD) who had not engaged in resistive exercise for at least six months volunteered to participate in this project. Subjects completed four 1RM testing sessions each for FW and ARED (eight total sessions) using a balanced, randomized, crossover design. All testing using one device was completed before progressing to the other. During each session, 1RM was measured for the squat, heel raise, and deadlift exercises. Generalizability (G) and intraclass correlation coefficients (ICC) were calculated for each exercise on each device and were used to predict the number of sessions needed to obtain a reliable 1RM measurement (G . 0.90). Interclass reliability coefficients and Pearson's correlation coefficients (R) also were calculated for the highest 1RM value (1RM9sub peak)) obtained for each exercise on each device to quantify 1RM relationships between devices.

  12. TEMPEST code modifications and testing for erosion-resisting sludge simulations

    International Nuclear Information System (INIS)

    Onishi, Y.; Trent, D.S.

    1998-01-01

    The TEMPEST computer code has been used to address many waste retrieval operational and safety questions regarding waste mobilization, mixing, and gas retention. Because the amount of sludge retrieved from the tank is directly related to the sludge yield strength and the shear stress acting upon it, it is important to incorporate the sludge yield strength into simulations of erosion-resisting tank waste retrieval operations. This report describes current efforts to modify the TEMPEST code to simulate pump jet mixing of erosion-resisting tank wastes and the models used to test for erosion of waste sludge with yield strength. Test results for solid deposition and diluent/slurry jet injection into sludge layers in simplified tank conditions show that the modified TEMPEST code has a basic ability to simulate both the mobility and immobility of the sludges with yield strength. Further testing, modification, calibration, and verification of the sludge mobilization/immobilization model are planned using erosion data as they apply to waste tank sludges

  13. Using repeat electrical resistivity surveys to assess heterogeneity in soil moisture dynamics under contrasting vegetation types

    Science.gov (United States)

    Dick, Jonathan; Tetzlaff, Doerthe; Bradford, John; Soulsby, Chris

    2018-04-01

    As the relationship between vegetation and soil moisture is complex and reciprocal, there is a need to understand how spatial patterns in soil moisture influence the distribution of vegetation, and how the structure of vegetation canopies and root networks regulates the partitioning of precipitation. Spatial patterns of soil moisture are often difficult to visualise as usually, soil moisture is measured at point scales, and often difficult to extrapolate. Here, we address the difficulties in collecting large amounts of spatial soil moisture data through a study combining plot- and transect-scale electrical resistivity tomography (ERT) surveys to estimate soil moisture in a 3.2 km2 upland catchment in the Scottish Highlands. The aim was to assess the spatio-temporal variability in soil moisture under Scots pine forest (Pinus sylvestris) and heather moorland shrubs (Calluna vulgaris); the two dominant vegetation types in the Scottish Highlands. The study focussed on one year of fortnightly ERT surveys. The surveyed resistivity data was inverted and Archie's law was used to calculate volumetric soil moisture by estimating parameters and comparing against field measured data. Results showed that spatial soil moisture patterns were more heterogeneous in the forest site, as were patterns of wetting and drying, which can be linked to vegetation distribution and canopy structure. The heather site showed a less heterogeneous response to wetting and drying, reflecting the more uniform vegetation cover of the shrubs. Comparing soil moisture temporal variability during growing and non-growing seasons revealed further contrasts: under the heather there was little change in soil moisture during the growing season. Greatest changes in the forest were in areas where the trees were concentrated reflecting water uptake and canopy partitioning. Such differences have implications for climate and land use changes; increased forest cover can lead to greater spatial variability, greater

  14. Penicillin-susceptible Staphylococcus aureus: susceptibility testing, resistance rates and outcome of infection.

    Science.gov (United States)

    Hagstrand Aldman, Malin; Skovby, Annette; I Påhlman, Lisa

    2017-06-01

    Staphylococcus aureus (SA) is an important human pathogen that causes both superficial and invasive infections. Penicillin is now rarely used in the treatment of SA infections due to widespread resistance and a concern about the accuracy of existing methods for penicillin susceptibility testing. The aims of the present study were to determine the frequency of penicillin-susceptible SA isolates from blood and wound cultures in Lund, Sweden, and to evaluate methods for penicillin testing in SA. We also wanted to investigate if penicillin-susceptible isolates are associated with higher mortality. Hundred blood culture isolates collected 2008/2009, 140 blood culture isolates from 2014/2015, and 141 superficial wound culture strains from 2015 were examined. Penicillin susceptibility was tested with disk diffusion according to EUCAST guidelines, and results were confirmed with a cloverleaf assay and PCR amplification of the BlaZ gene. Patient data for all bacteraemia cases were extracted from medical records. The disk diffusion method with assessment of both zone size and zone edge appearance had high accuracy in our study. About 57% of bacteraemia isolates from 2008/2009 were sensitive to penicillin compared to 29% in 2014/2015 (p penicillin susceptible. There was no difference in co-morbidity or mortality rates between patients with penicillin resistant and penicillin sensitive SA bacteraemia. Disk-diffusion is a simple and reliable method to detect penicillin resistance in SA, and susceptibility rates are significant. Penicillin has many theoretical advantages and should be considered in the treatment of SA bacteraemia when susceptible.

  15. Genetic pathway in acquisition and loss of vancomycin resistance in a methicillin resistant Staphylococcus aureus (MRSA strain of clonal type USA300.

    Directory of Open Access Journals (Sweden)

    Susana Gardete

    2012-02-01

    Full Text Available An isolate of the methicillin-resistant Staphylococcus aureus (MRSA clone USA300 with reduced susceptibility to vancomycin (SG-R (i.e, vancomycin-intermediate S. aureus, VISA and its susceptible "parental" strain (SG-S were recovered from a patient at the end and at the beginning of an unsuccessful vancomycin therapy. The VISA phenotype was unstable in vitro generating a susceptible revertant strain (SG-rev. The availability of these 3 isogenic strains allowed us to explore genetic correlates of antibiotic resistance as it emerged in vivo. Compared to the susceptible isolate, both the VISA and revertant strains carried the same point mutations in yycH, vraG, yvqF and lspA genes and a substantial deletion within an intergenic region. The revertant strain carried a single additional frameshift mutation in vraS which is part of two component regulatory system VraSR. VISA isolate SG-R showed complex alterations in phenotype: decreased susceptibility to other antibiotics, slow autolysis, abnormal cell division and increased thickness of cell wall. There was also altered expression of 239 genes including down-regulation of major virulence determinants. All phenotypic properties and gene expression profile returned to parental levels in the revertant strain. Introduction of wild type yvqF on a multicopy plasmid into the VISA strain caused loss of resistance along with loss of all the associated phenotypic changes. Introduction of the wild type vraSR into the revertant strain caused recovery of VISA type resistance. The yvqF/vraSR operon seems to function as an on/off switch: mutation in yvqF in strain SG-R turns on the vraSR system, which leads to increase in vancomycin resistance and down-regulation of virulence determinants. Mutation in vraS in the revertant strain turns off this regulatory system accompanied by loss of resistance and normal expression of virulence genes. Down-regulation of virulence genes may provide VISA strains with a "stealth

  16. Functional test of a Radon sensor based on a high-resistivity-silicon BJT detector

    Energy Technology Data Exchange (ETDEWEB)

    Dalla Betta, G.F., E-mail: dallabe@disi.unitn.it [DISI, Università di Trento, and INFN Trento, Trento (Italy); RSens srl, Modena (Italy); Tyzhnevyi, V. [DISI, Università di Trento, and INFN Trento, Trento (Italy); Bosi, A.; Bonaiuti, M. [RSens srl, Modena (Italy); Angelini, C.; Batignani, G.; Bettarini, S.; Bosi, F.; Forti, F.; Giorgi, M.A.; Morsani, F.; Paoloni, E.; Rizzo, G.; Walsh, J. [Dipartimento di Fisica, Università di Pisa, and INFN Pisa, Pisa (Italy); Lusiani, A. [Scuola Normale Superiore and INFN Pisa, Pisa (Italy); Ciolini, R.; Curzio, G.; D' Errico, F.; Del Gratta, A. [Dipartimento di Ingegneria Meccanica, Nucleare e della Produzione, Università di Pisa, Pisa (Italy); Bidinelli, L. [En and tech, Università di Modena e Reggio Emilia, Reggio Emilia (Italy); RSens srl, Modena (Italy); and others

    2013-08-01

    A battery-powered, wireless Radon sensor has been designed and realized using a BJT, fabricated on a high-resistivity-silicon substrate, as a radiation detector. Radon daughters are electrostatically collected on the detector surface. Thanks to the BJT internal amplification, real-time α particle detection is possible using simple readout electronics, which records the particle arrival time and charge. Functional tests at known Radon concentrations, demonstrated a sensitivity up to 4.9 cph/(100 Bq/m{sup 3}) and a count rate of 0.05 cph at nominally-zero Radon concentration.

  17. Test and characterization of multigap resistive plate chambers for the EEE project

    CERN Document Server

    Bossini, E

    2016-01-01

    The Extreme Energy Events project is based on the deployment of cosmic-ray telescopes in Italian high schools with the active contribution of students and teachers. Each telescope is made by three Multigap Resistive Plate Chambers readout by strips. With around 50 telescopes already built and others under construction, specific systems to test and characterize the chambers are needed. In this article I will present a flexible and software-configurable solution to perform chamber efficiency studies with a set of scintillators and hardware to automatically scan detector strips to identify electrical issues. Both systems can provide accurate information but at the same time they can be easily operated by students.

  18. Isolation of coagulase-positive staphylococci from bitches' colostrum and milk and genetic typing of methicillin-resistant Staphylococcus pseudintermedius strains.

    Science.gov (United States)

    Rota, Ada; Corrò, Michela; Drigo, Ilenia; Bortolami, Alessio; Börjesson, Stefan

    2015-07-23

    Among the coagulase-positive, potentially pathogenic staphylococci, Staphylococcus pseudintermedius has been frequently isolated from bitches' milk. This organism colonizes the mammary gland or causes infection, while S. aureus has been only occasionally reported. The objective of this study was to investigate the occurrence and persistence of coagulase-positive staphylococci in the colostrum and milk of postpartum bitches, either treated or untreated with antimicrobials, and to assess the incidence, antibiotic resistance profile and genetic type of the methicillin-resistant strains. On postpartum D1, D7 and D15, drops of secretion were collected from the mammary glands of 27 postpartum bitches, nine of which were treated with antimicrobials. Coagulase-positive staphylococci were identified, antimicrobial susceptibility and the presence of mecA were tested and the genetic profile of methicillin-resistant strains was assessed. Staphylococcus pseudintermedius was the only coagulase-positive staphylococcus isolated, and its presence was detected in 21 out of 27 bitches and in 66 out of 145 swabs. In a single bitch, it caused puerperal mastitis. In untreated bitches, the frequency of isolation was lower in colostrum than in milk. All of the isolates except one were resistant to at least three antimicrobial classes, while 14 out of 66 S. pseudintermedius strains were methicillin-resistant mecA positive (MRSP) and were isolated from eight bitches housed in the same breeding kennel. A significant association was found between antimicrobial treatment and the presence of MRSP. Six of the 12 typed isolates belonged to spa-type t02 carrying SCCmec II/III, and another six were non-typeable with spa carrying SCCmec IV. The t02-SCCmec II/III isolates were sequence type (ST) 71; four NT-SCCmec IV isolates were ST258 and two were ST369. PFGE showed that isolates from the same dog had identical band patterns, while isolates from different dogs had unique band patterns. MRSP strains

  19. Central location test vs. home use test: Contrasting results depending on product type

    NARCIS (Netherlands)

    Boutrolle, I.; Delarue, J.; Arranz, D.; Rogeaux, M.; Köster, E.P.

    2007-01-01

    Marketing professionals and sensory scientists have several hedonic testing methods at their disposal to assess product acceptability. The central location test (CLT) which usually takes place in a standardised location under controlled conditions is more frequently used than the home use test

  20. Asphalt Mixture Fatigue Testing : Influence of Test Type and Specimen Size

    NARCIS (Netherlands)

    Li, N.

    2013-01-01

    Fatigue characterization of an asphalt mixture is commonly estimated by laboratory fatigue tests. Based on the classical fatigue analysis, fatigue lives obtained from different test devices are not comparable even when they are performed at the same test conditions. It is believed that there are two

  1. A new method for testing thermal shock resistance properties of soapstone – Effects of microstructures and mineralogical variables

    Directory of Open Access Journals (Sweden)

    A. Huhta

    2016-09-01

    Full Text Available Soapstone industry utilizes different types of soapstone mainly as a construction material for fireplaces. In this application soapstone has to meet different temperature requirements in different parts of fireplaces. Mineralogical and structural information is needed for placing an appropriate type of soapstone in an appropriate position in the fireplace construction. This allows employment of higher temperatures resulting in more particulate-free combustion, which makes it possible for soapstone industry to develop more efficient and environmentally friendly fireplaces. Of many soapstone types, which differ from each other in their chemical composition and thermal properties, carbonate soapstone and its microstructural variations were investigated in this study. A new method was developed to measure thermal shock resistant of natural stones. By exposing carbonate soapstone samples of different textural types to rapid temperature changes, it was possible to determine the parameters that affect the capacity of the rock to resist thermal shock. The results indicate that the type of microtexture is an important factor in controlling the thermal shock resistance of carbonate soapstone. The soapstone samples with a high thermal shock resistance show deformation textures, such as crenulation cleavage and S/C mylonite. A strong negative correlation was observed between the thermal shock resistance and length of cleavage domains in foliated rocks. Also a slight elevation in the iron concentration of talc and magnesite was discovered to improve the thermal shock resistance of carbonate soapstone. Attention should especially be paid to the length and planarity of cleavage domains of spaced foliation.

  2. Prevalence of insulin resistance and prediction of glucose intolerance and type 2 diabetes mellitus in women with polycystic ovary syndrome.

    Science.gov (United States)

    Vrbikova, Jana; Dvorakova, Katerina; Grimmichova, Tereza; Hill, Martin; Stanicka, Sona; Cibula, David; Bendlova, Bela; Starka, Luboslav; Vondra, Karel

    2007-01-01

    Diabetes mellitus type 2 (DM2) affects 10% of women with polycystic ovary syndrome (PCOS). We evaluated the sensitivity and specificity of clinical and fasting biochemical parameters in screening for impaired glucose tolerance (IGT) and DM2. Women with PCOS [n=244, age 27.4+/-7.5 years, body mass index (BMI) 27.5+/-6.9 kg/m(2)] and healthy women (n=57, age 26.8+/-5.8 years, BMI 21.3+/-2.1 kg/m(2)) underwent basal blood sampling and an oral glucose tolerance test (oGTT). Insulin resistance was identified in 40.2% of PCOS women. Impaired fasting glucose (5.6-6.9 mmol/L) was found in 30 subjects (12.3%), but the oGTT revealed IGT in only six of these cases and DM2 in one subject. IGT was found in 23 (9.4%) and DM2 in four (1.6%) of the women with PCOS. The conventional upper limits for total cholesterol, triglycerides, systolic and diastolic blood pressure and fasting glucose revealed low sensitivity for the identification of impaired glucose metabolism. No single parameter nor any combination of them showed an accuracy sufficient for screening of IGT or DM2 in PCOS patients. All PCOS patients should be screened using an oGTT to identify disturbances in glucose metabolism.

  3. N-type nano-silicon powders with ultra-low electrical resistivity as anode materials in lithium ion batteries

    Science.gov (United States)

    Yue, Zhihao; Zhou, Lang; Jin, Chenxin; Xu, Guojun; Liu, Liekai; Tang, Hao; Li, Xiaomin; Sun, Fugen; Huang, Haibin; Yuan, Jiren

    2017-06-01

    N-type silicon wafers with electrical resistivity of 0.001 Ω cm were ball-milled to powders and part of them was further mechanically crushed by sand-milling to smaller particles of nano-size. Both the sand-milled and ball-milled silicon powders were, respectively, mixed with graphite powder (silicon:graphite = 5:95, weight ratio) as anode materials for lithium ion batteries. Electrochemical measurements, including cycle and rate tests, present that anode using sand-milled silicon powder performed much better. The first discharge capacity of sand-milled silicon anode is 549.7 mAh/g and it is still up to 420.4 mAh/g after 100 cycles. Besides, the D50 of sand-milled silicon powder shows ten times smaller in particle size than that of ball-milled silicon powder, and they are 276 nm and 2.6 μm, respectively. In addition, there exist some amorphous silicon components in the sand-milled silicon powder excepting the multi-crystalline silicon, which is very different from the ball-milled silicon powder made up of multi-crystalline silicon only.

  4. Edge screw withdrawal resistance in conventional particleboard and OSB: Influence of the particles type

    Directory of Open Access Journals (Sweden)

    Miljković Jovan

    2007-01-01

    Full Text Available This research was based on presumption that the changes in size and shape of wood particles are expected to have certain impact on the particleboard quality in general. Since the conventional particleboard (PB and oriented strand board (OSB were built of the quite diverse wood particles, they present interesting specimens in the comparison tests. In this work, the influence of the wood particles type on the edge screw holding performance of conventional particleboard and OSB was investigated. Those tests were obtained with the screw diameters of 4.0 mm, 4.5 mm and 5 mm. Depth of embedment was 30 mm for all tests and with the pilot-hole diameter kept in the range of 80-90% in respect of the screw root diameter. Additional tests of the thickness density profile and tensile strength perpendicular to the surface of the board were conducted. Since the middle layer structure of the particleboard embeds the screw body, both mentioned parameters are considered important in the aspect of the quality of the edge screw holding performance. In order to have further insight into the conformation of the middle layer the image survey was obtained on the split board section presenting the surface of the middle layer. Significant differences in the SWR performance of OSB and PB was recorded at all screw diameters. For the screw withdrawal tests parameters OSB samples showed 56-73% superior mean values then conventional PB. On the other hand, the OSB showed wider dispersions of measured withdrawal forces at all screw diameters, which might present some of the problems in certain engineering and project calculations.

  5. Diphtheria toxin resistance in human lymphocytes and lymphoblasts in the in vivo somatic cell mutation test

    International Nuclear Information System (INIS)

    Tomkins, D.J.; Wei, L.; Laurie, K.E.

    1985-01-01

    It has been shown that circulating peripheral blood lymphocytes can be used for the enumeration of 6-thioguanine-resistant cells that presumably arise by mutation in vivo. This somatic cell mutation test has been studied in lymphocytes from human populations exposed to known mutagens and/or carcinogens. The sensitivity of the test could be further enhanced by including other gene markers, since there is evidence for locus-specific differences in response to mutagens. Resistance to diphtheria toxin (Dip/sup r/) seemed like a potential marker to incorporate into the test because the mutation acts codominantly, can readily be selected in human diploid fibroblasts and Chinese hamster cells with no evidence for cell density or cross-feeding effects, and can be assayed for in nondividing cells by measuring protein synthesis inhibition. Blood samples were collected from seven individuals, and fresh, cryopreserved, or Epstein-Barr virus (EBV)-transformed lymphocytes were tested for continued DNA synthesis ( 3 H-thymidine, autoradiography) or protein synthesis ( 35 S-methionine, scintillation counting). Both fresh and cryopreserved lymphocytes, stimulated to divide with phytohemagglutinin (PHA), continued to synthesize DNA in the presence of high doses of diphtheria toxin (DT). Similarly, both dividing (PHA-stimulated) and nondividing fresh lymphocytes carried on significant levels of protein synthesis even 68 hr after exposure to 100 flocculating units (LF)/ml DT. The results suggest that human T and B lymphocytes may not be as sensitive to DT protein synthesis inhibition as human fibroblast and Chinese hamster cells. For this reason, Dip/sup r/ may not be a suitable marker for the somatic cell mutation test

  6. The impact of parental history of type 2 diabetes on hyperinsulinemia and insulin resistance in subjects from central Mexico.

    Science.gov (United States)

    Acevedo-Negrete, Ana Paula; Porchia, Leonardo M; Gonzalez-Mejia, M Elba; Torres-Rasgado, Enrique; Solis-Cano, Dania G; Ruiz-Vivanco, Guadalupe; Pérez-Fuentes, Ricardo

    2017-12-01

    Hyperinsulinemia and insulin resistance are both associated with the development of Type 2 Diabetes and other pathologies; however, the influence of parental history of Type 2 diabetes (PH-T2D) has yet to be investigated. Therefore, this study was conducted to determine the effect of PH-T2D has on the risk of developing hyperinsulinemia and IR. 1092 subjects (703 non-pregnant females and 389 males) were enrolled for a cross-sectional study. Clinical and biochemical parameters were collected. Subjects were allocated according to their PH-T2D: no parents, one parent, or both parents. Insulin resistance was calculated using the HOMA1 equation (HOMA1-IR). Logistic regression was used to determine the association (odds ratio) between PH-T2D and hyperinsulinemia or insulin resistance. Increasing degrees of PH-T2D were associated with significant increases in fasting plasma glucose, insulin, and HOMA1-IR (p insulin resistance (odds ratio=1.47, 95%CI: 1.08-2.00 and odds ratio=1.77, 95%CI: 1.09-2.87, respectively), when adjusting for age, sex, BMI, fasting plasma glucose, and triglycerides. The presences of PH-T2D significantly increased the risk of developing hyperinsulinemia and insulin resistance. Copyright © 2017 Diabetes India. Published by Elsevier Ltd. All rights reserved.

  7. Understanding the role of L-type lectin receptor kinases in Phytophthora resistance

    NARCIS (Netherlands)

    Wang, Y.

    2014-01-01

    Abstract

    Phytophthora pathogens are notorious for causing severe damage to many agriculturally and ornamentally important plants. Effective plant resistance depends largely on the capacity to perceive pathogens and to activate rapid defence. Cytoplasmic resistance

  8. Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; part II: control development and testing.

    Science.gov (United States)

    Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

    2015-01-01

    Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. The controller, based on an inverse three-element phenomenological model and adaptive nonlinear control, allows the system to operate as a type of haptic device. A human quadriceps dynamic simulator was developed (as described in Part I of this work) so that control effectiveness and accommodation could be tested prior to human implementation. Tracking error results indicate that the control system is effective at producing PMA displacement and resistance necessary for a scaled, simulated neuromuscular actuator to maintain low-velocity isokinetic movement during simulated concentric and eccentric knee extension.

  9. Microscopic mapping of specific contact resistances and long-term reliability tests on 4H-silicon carbide using sputtered titanium tungsten contacts for high temperature device applications

    Science.gov (United States)

    Lee, S.-K.; Zetterling, C.-M.; Ostling, M.

    2002-07-01

    We report on the microscopic mapping of specific contact resistances (rhoc) and long-term reliability tests using sputtered titanium tungsten (TiW) ohmic contacts to highly doped n-type epilayers of 4H-silicon carbide. The TiW ohmic contacts showed good uniformity with low contact resistivity of 3.3 x10-5 Omega cm2. Microscopic mapping of the rhoc showed that the rhoc had a distribution that decreased from the center to the edge of the wafer. This distribution of the rhoc is caused by variation of the doping concentration of the wafer. Sacrificial oxidation at high temperature partially recovered inductively coupled plasma etch damage. TiW contacts with platinum and gold capping layers have stable specific contact resistance at 500 and 600 degC in a vacuum chamber for 308 h.

  10. Validation of a Human Papillomavirus (HPV) DNA Cervical Screening Test That Provides Expanded HPV Typing.

    Science.gov (United States)

    Demarco, Maria; Carter-Pokras, Olivia; Hyun, Noorie; Castle, Philip E; He, Xin; Dallal, Cher M; Chen, Jie; Gage, Julia C; Befano, Brian; Fetterman, Barbara; Lorey, Thomas; Poitras, Nancy; Raine-Bennett, Tina R; Wentzensen, Nicolas; Schiffman, Mark

    2018-05-01

    As cervical cancer screening shifts from cytology to human papillomavirus (HPV) testing, a major question is the clinical value of identifying individual HPV types. We aimed to validate Onclarity (Becton Dickinson Diagnostics, Sparks, MD), a nine-channel HPV test recently approved by the FDA, by assessing (i) the association of Onclarity types/channels with precancer/cancer; (ii) HPV type/channel agreement between the results of Onclarity and cobas (Roche Molecular Systems, Pleasanton, CA), another FDA-approved test; and (iii) Onclarity typing for all types/channels compared to typing results from a research assay (linear array [LA]; Roche). We compared Onclarity to histopathology, cobas, and LA. We tested a stratified random sample ( n = 9,701) of discarded routine clinical specimens that had tested positive by Hybrid Capture 2 (HC2; Qiagen, Germantown, MD). A subset had already been tested by cobas and LA ( n = 1,965). Cervical histopathology was ascertained from electronic health records. Hierarchical Onclarity channels showed a significant linear association with histological severity. Onclarity and cobas had excellent agreement on partial typing of HPV16, HPV18, and the other 12 types as a pool (sample-weighted kappa value of 0.83); cobas was slightly more sensitive for HPV18 and slightly less sensitive for the pooled high-risk types. Typing by Onclarity showed excellent agreement with types and groups of types identified by LA (kappa values from 0.80 for HPV39/68/35 to 0.97 for HPV16). Onclarity typing results corresponded well to histopathology and to an already validated HPV DNA test and could provide additional clinical typing if such discrimination is determined to be clinically desirable. This is a work of the U.S. Government and is not subject to copyright protection in the United States. Foreign copyrights may apply.

  11. Integron types, gene cassettes and antimicrobial resistance profile of Acinetobacter baumannii isolated from BAL samples in Babol, north of Iran.

    Science.gov (United States)

    Akrami, Fariba; Shahandashti, Elaheh Ferdosi; Yahyapour, Yousef; Sadeghi, Mohsen; Khafri, Soraya; Pournajaf, Abazar; Rajabnia, Ramazan

    2017-08-01

    Multi-drug resistant isolates of Acinetobacter baumannii have created therapeutic problems worldwide. This current study was intended to determine the Integron types, gene cassettes and antimicrobial resistance profile of A. baumannii isolated from BAL samples in Babol, north of Iran. During a 15-month period, 35 A. baumannii isolates were studied. Different classes of antimicrobial agents were used to determine the resistance ratios. Multiplex-PCR was used to detect different types of integrons and associated gene cassettes. The resistance rates to GM, FEP, AK, TOB, CP, PIP, SAM, IPM, SXT, CTX, CAZ, CL, TIM, MEM, and TZP were 85.7%, 100%, 91.4%, 68.5%, 94.3%, 88.5%, 97.1%, 94.3%, 100%, 100%, 100%, 0.0%, 91.4%, 94.3% and 91.4%, respectively. The distribution analysis of int genes showed that 25.7%, 88.6% and 28.6% of isolates carried the intI, intII and intIII genes, respectively. The prevalence of aadB, dfrA1, bla-OXA 30 and aadA1 genes were 94.3%, 77.1%, 40% and 5.7%, respectively. The current study showed that a high level of A. baumannii isolates harbor integrons in our therapeutic center, which may lead to distribution of multiple antimicrobial resistance. The different types of gene cassette arrays in the present study highlight the important role of geographical features in MDR isolates dissemination which could be credited to different profiles of drug consumption in different areas. The findings emphasized that the need for continuous surveillance to prevent distribution of multidrug resistance among A. baumannii strains in Iran. Copyright © 2017. Published by Elsevier Ltd.

  12. Low-dose spironolactone reduces plasma fibulin-1 levels in patients with type 2 diabetes and resistant hypertension

    DEFF Research Database (Denmark)

    Stolzenburg Oxlund, Christina; Cangemi, Claudia; Henriksen, J E

    2015-01-01

    Diabetic patients with hypertension are at particularly high risk of vascular damage and consequently cardiovascular and renal disease. Fibulin-1, an extracellular matrix glycoprotein, is increased in arterial tissue and plasma from individuals with type 2 diabetes. This study aimed to evaluate...... whether antihypertensive treatment with spironolactone changes plasma fibulin-1 levels. In a multicenter, double-blind, randomized, placebo-controlled study, 119 patients with type 2 diabetes and resistant hypertension were included. A dose of spironolactone 25 mg or matching placebo was added to previous....... Treatment with low-dose spironolactone reduced plasma fibulin-1 levels in patients with type 2 diabetes and resistant hypertension. This supports the hypothesis that the antihypertensive effect of the mineralocorticoid receptor blocker in part may be due to regression of vascular remodeling....

  13. Mild Caloric Restriction Decreases Insulin Requirements in Patients With Type 2 Diabetes and Severe Insulin Resistance.

    Science.gov (United States)

    Meehan, Cristina Adelia; Cochran, Elaine; Mattingly, Megan; Gorden, Phillip; Brown, Rebecca J

    2015-07-01

    Type 2 diabetes (T2D) affects ~10% of the US population, a subset of whom have severe insulin resistance (SIR) (>200 units/d). Treatment of these patients with high-dose insulin presents logistical and compliance challenges. We hypothesized that mild caloric restriction would reduce insulin requirements in patients with T2D and SIR.This was a retrospective study at the National Institutes of Health Clinical Center. Inclusion criteria were as follows: T2D, and insulin dose >200 units/d or >2 units/kg/d. The intervention consisted of mild caloric restriction during a 3 to 6-day hospitalization. The major outcomes were change in insulin dose and blood glucose from admission to discharge.Ten patients met inclusion criteria. Baseline glycated hemoglobin A1c was 10.0 ± 1.6% and body mass index 38.8 ± 9.0 kg/m. Food intake was restricted from 2210 ± 371 kcal/d preadmission to 1810 ± 202 during the hospital stay (16.5% reduction). Insulin dose decreased from 486 ± 291 units/d preadmission to 223 ± 127 at discharge (44% reduction, P = 0.0025). Blood sugars decreased nonsignificantly in the fasting state (from 184 ± 85 to 141 ± 42, P = 0.20), before lunch (239 ± 68 to 180 ± 76, P = 0.057), and at bedtime (212 ± 95 to 176 ± 48, P = 0.19), and significantly decreased before dinner (222 ± 92 to 162 ± 70, P = 0.016).Mild caloric restriction, an accessible and affordable intervention, substantially reduced insulin doses in patients with T2D and SIR. Further studies are needed to determine if the intervention and results are sustainable outside of a hospital setting.

  14. Short Communication: Prevalence of HIV Type 1 Transmitted Drug Resistance in Slovenia: 2005–2010

    Science.gov (United States)

    Lunar, Maja M.; Židovec Lepej, Snježana; Abecasis, Ana B.; Tomažič, Janez; Vidmar, Ludvik; Karner, Primož; Vovko, Tomaž D.; Pečavar, Blaž; Maver, Polona J.; Seme, Katja

    2013-01-01

    Abstract Slovenia is a small European country with a total of 547 HIV-infected individuals cumulatively reported by the end of 2011. However, the estimated incidence rate of HIV infections increased from 7.0 per million in 2003 to 26.8 per million in 2011. In this study, we assessed the prevalence of transmitted drug resistance (TDR) in the past 6 years (2005–2010) and analyzed the time trend of the proportion of men having sex with men (MSM) and HIV-1 subtype B among newly diagnosed individuals in a 15-year period (1996–2010) in Slovenia. Among 150 patients included in the study, representing 63% of HIV-1 newly diagnosed patients in 2005–2010, TDR was found in seven patients (4.7%). The prevalence of TDR to nucleoside reverse transcriptase inhibitors, nonnucleoside reverse transcriptase inhibitors, and protease inhibitors was 2% (3/150), 2% (3/150), and 0.7% (1/150), respectively. The majority of patients were infected with subtype B (134/150, 89%), while subtype A was detected in 6.0% (9/150), subtype D in 1.3% (2/150), and subtype G and CRF02_AG in 0.7% (one patient each). Three of 150 sequences could not be typed. Infection with subtype B was found to be significantly associated with male gender, Slovenia being reported as the country of the patient's nationality and origin of the virus, CDC class A, mode of transmission with homosexual/bisexual contact, sex with an anonymous person, and a higher CD4+ count. Among patients carrying the subtype B virus, an MSM transmission route was reported in 87% of patients. Although the prevalence of TDR in Slovenia is still below the European average, active surveillance should be continued, especially among MSM, the most vulnerable population for HIV-1 infection in this part of Europe. PMID:22860694

  15. Short communication: prevalence of HIV type 1 transmitted drug resistance in Slovenia: 2005-2010.

    Science.gov (United States)

    Lunar, Maja M; Židovec Lepej, Snježana; Abecasis, Ana B; Tomažič, Janez; Vidmar, Ludvik; Karner, Primož; Vovko, Tomaž D; Pečavar, Blaž; Maver, Polona J; Seme, Katja; Poljak, Mario

    2013-02-01

    Slovenia is a small European country with a total of 547 HIV-infected individuals cumulatively reported by the end of 2011. However, the estimated incidence rate of HIV infections increased from 7.0 per million in 2003 to 26.8 per million in 2011. In this study, we assessed the prevalence of transmitted drug resistance (TDR) in the past 6 years (2005-2010) and analyzed the time trend of the proportion of men having sex with men (MSM) and HIV-1 subtype B among newly diagnosed individuals in a 15-year period (1996-2010) in Slovenia. Among 150 patients included in the study, representing 63% of HIV-1 newly diagnosed patients in 2005-2010, TDR was found in seven patients (4.7%). The prevalence of TDR to nucleoside reverse transcriptase inhibitors, nonnucleoside reverse transcriptase inhibitors, and protease inhibitors was 2% (3/150), 2% (3/150), and 0.7% (1/150), respectively. The majority of patients were infected with subtype B (134/150, 89%), while subtype A was detected in 6.0% (9/150), subtype D in 1.3% (2/150), and subtype G and CRF02_AG in 0.7% (one patient each). Three of 150 sequences could not be typed. Infection with subtype B was found to be significantly associated with male gender, Slovenia being reported as the country of the patient's nationality and origin of the virus, CDC class A, mode of transmission with homosexual/bisexual contact, sex with an anonymous person, and a higher CD4(+) count. Among patients carrying the subtype B virus, an MSM transmission route was reported in 87% of patients. Although the prevalence of TDR in Slovenia is still below the European average, active surveillance should be continued, especially among MSM, the most vulnerable population for HIV-1 infection in this part of Europe.

  16. Clinical application of nuclear magnetic resonance imaging (resistive type) on cardiovascular disease

    International Nuclear Information System (INIS)

    Imai, Hitoshi; Yoshida, Katsuya; Watanabe, Shigeru; Masuda, Yoshiaki; Inagaki, Yoshiaki; Ikehira, Hiroo; Fukuda, Nobuo; Tateno, Yukio.

    1984-01-01

    In order to evaluate the usefulness of Nuclear Magnetic Resonance (NMR) imaging in diagnosing cardiovascular disease, 27 subjects were examined using a 0.1-Tesla resistive type (ASAHI MARK-J). In 10 normal subjects, four cardiac chambers, interventricular septum, aorta, pulmonary vessels and vena cava were clearly identified in NMR imaging. In two patients with old anteroseptal myocardial infarction, anteroseptal wall thinning and left ventricular aneurysm with mural thrombi were demonstrated. In two cases of antrolateral and posterolateral myocardial infarction, however, infarcted areas were not identified in NMR imaging. In one patient with congestive cardiomyopathy, enlarged left ventricle without hypertrophy was recognized. In two patients with hypertrophic obstructive cardiomyopathy, NMR imaging disclosed thickened left ventricular wall associated with its narrowed cavity. A mural thrombus in the right ventricle was distinctly visualized in one patient with cardio-vascular Behcet's disease. In two patients with mitral valve stenosis, enlarged left atrium with a mural thrombus was clearly demonstrated in both cross and longitudinal sections. In three patients with thoratic aortic aneurysm, local dilatation of aorta and mural thrombi were recognized. In four patients with dissecting aortic aneurysm, double channels with an intimal flap in the aorta were visualized in NMR imaging. Mean T 1 values and standard deviations of left ventricle, left ventricular wall, and thrombi were 593+-89, 341+-20, 316+-84 msec, respectively. Mean T 1 values of thrombi were ordinally shorter than those of left ventricule. But some thrombi which might be expected fresh had longer T 1 values. (J.P.N.)

  17. The application of virtual reality technology to testing resistance to motion sickness

    Directory of Open Access Journals (Sweden)

    Menshikova G. Ya.

    2017-09-01

    Full Text Available Background. Prolonged exposure to moving images in virtual reality systems can cause virtual reality induced motion sickness (VIMS. The ability to resist motion sickness may be associated with the level of vestibular function development. objective. The aim of the present research is to study the oculomotor characteristics of individuals whose observation of moving virtual environments causes the VIMS effect. We hypothesized that people who have a robust vestibular function as a result of their professional activity, are less susceptible to VIMS than people who have no such professional abilities. The differences in people’s abilities to resist the effects of the virtual environment may be revealed in the oculomotor characteristics registered during their interaction with a virtual environment. Design. Figure skaters, football players, wushu fighters, and non-trained people were tested. e CAVE virtual reality system was used to initiate the VIMS effect. three virtual scenes were constructed consisting of many bright balls moving as a whole around the observer. e scenes differed in the width of the visual field; all balls subtended either 45°, 90° or 180°. Results. The results showed more active eye movements for athletes compared to non-trained people, i.e. an increase in blink, fixation, and saccade counts. A decrease in saccadic amplitudes was revealed for figure skaters. These characteristics were considered specific indicators of the athletes’ ability to resist motion sickness. Conclusions. It was found that the strength of the VIMS effect increased with the increasing width of the visual field. The effectiveness of virtual reality and eye-tracking technologies to test the VIMS effect