WorldWideScience

Sample records for resistance pr bulk

  1. Heavy Fermion Behavior of Pr 4f Electrons in Filled Skutterudites Studied by Bulk-Sensitive Photoemission

    International Nuclear Information System (INIS)

    Yamasaki, A.Y.; Imada, S.; Masuda, T.; Sekiyama, H.; Suga, S.; Nanba, T.; Sugawara, H.; Matsuda, T.D.; Sato, H.; Sekine, C.; Shirotani, I.; Harima, H.

    2003-01-01

    Pr 4 f electronic structures in Pr-based filled skutterudites PrT 4 X 12 (T = Fe and Ru; X = P and Sb) have been studied by the high-resolution bulk-sensitive Pr 3d → 4f resonance photoemission spectroscopy. A very strong Pr 4f spectral intensity is observed just below the Fermi level in the heavy-Fermion PrFe 4 P 12 . This is the first observation of the Kondo resonance due to the quadrupolar Kondo effect, the origin of which is attributed to the strong hybridization between the Pr 4f and the conduction electrons. (author)

  2. Modelling bulk canopy resistance from climatic variables for evapotranspiration estimation

    Science.gov (United States)

    Perez, P. J.; Martinez-Cob, A.; Lecina, S.; Castellvi, F.; Villalobos, F. J.

    2003-04-01

    Evapotranspiration is a component of the hydrological cycle whose accurate computation is needed for an adequate management of water resources. In particular, a high level of accuracy in crop evapotranspiration estimation can represent an important saving of economical and water resources at planning and management of irrigated areas. In the evapotranspiration process, bulk canopy resistance (r_c) is a primary factor and its correct modelling remains an important problem in the Penman-Monteith (PM) method, not only for tall crops but also for medium height and short crops under water stress. In this work, an alternative approach for modelling canopy resistance is presented against th PM method with constant canopy resistance. Variable r_c values are computed as function of a climatic resistance and compared with other two models, Katerji and Perrier and Todorovic. Hourly evapotranspiration values (ET_o) over grass were obtained with a weighing lysimeter and an eddy covariance system at the Ebro and Guadalquivir valleys (Spain) respectively. The main objective is to evaluate whether the use of variable rather than fixed r_c values, would improve the ET_o estimates obtained by applying the PM equation under the semiarid conditions of the two sites, where evaporative demand is high particularly during summer.

  3. PK-sensitive PrPSc is infectious and shares basic structural features with PK-resistant PrPSc

    Science.gov (United States)

    One of the main characteristics of the transmissible isoform of the prion protein (PrPSc) is its partial resistance to proteinase K (PK) digestion. Diagnosis of prion disease typically relies upon immunodetection of PK-digested PrPSc following Western blot or ELISA. More recently, researchers determ...

  4. Ionic strength and transition metals control PrPSc protease resistance and conversion-inducing activity.

    Science.gov (United States)

    Nishina, Koren; Jenks, Samantha; Supattapone, Surachai

    2004-09-24

    The essential component of infectious prions is a misfolded protein termed PrPSc, which is produced by conformational change of a normal host protein, PrPC. It is currently unknown whether PrPSc molecules exist in a unique conformation or whether they are able to undergo additional conformational changes. Under commonly used experimental conditions, PrPSc molecules are characteristically protease-resistant and capable of inducing the conversion of PrPC molecules into new PrPSc molecules. We describe the effects of ionic strength, copper, and zinc on the conformation-dependent protease resistance and conversion-inducing activity of PrPSc molecules in scrapie-infected hamster brains. In the absence of divalent cations, PrPSc molecules were > 20-fold more sensitive to proteinase K digestion in low ionic strength buffers than in high ionic strength buffers. Addition of micromolar concentrations of copper or zinc ions restored the protease resistance of PrPSc molecules under conditions of low ionic strength. These transition metals also controlled the conformation of purified truncated PrP-(27-30) molecules at low ionic strength, confirming that the N-terminal octapeptide repeat region of PrPSc is not required for binding to copper or zinc ions. The protease-sensitive and protease-resistant conformations of PrPSc were reversibly interchangeable, and only the protease-resistant conformation of PrPSc induced by high ionic strength was able to induce the formation of new protease-resistant PrP (PrPres) molecules in vitro. These findings show that PrPSc molecules are structurally interconvertible and that only a subset of PrPSc conformations are able to induce the conversion of other PrP molecules. Copyright 2004 American Society for Biochemistry and Molecular Biology, Inc.

  5. Bulk magnetic characterization of RCaCrO4 (Rrl02=Y, Pr, Sm ) oxides

    International Nuclear Information System (INIS)

    Martinez, J.L.; Fernandez-Diaz, M.T.; Chen, Q.; Prieto, C.; Andres, A. de; Saez-Puche, R.; Romero, J.

    1995-01-01

    The system RCaCrO 4 (R=Y, Sm, Pr) presents an orthorhombic structure (space group Bmab) at room temperature (RT), similar to that observed in La 2 MO 4 (M=Cu, Ni, Co). The magnetic susceptibility for RCaCrO 4 shows a weak temperature dependence down to 250 K, probably due to the antiferromagnetic ordering of the Cr sublattice above RT. Below RT there is a strong upturn anomaly at 210, 190 and 130 K for Pr, Sm and Y, respectively. This anomaly is associated with the appearance of a weak ferromagnetic component, and could be related to a low temperature structural phase transition, similar to that observed in the related compounds R 2 NiO 4 or La 1.88 Ba 0.12 CuO 4 . In the case of YCaCrO 4 this ferromagnetic component produces a hysteresis curve at 4.5 K with a coercive field of 0.7 T. For PrCaCrO 4 the coercive field is very small ( 4 shows a more complicated behavior with a low temperature magnetic transition (T N2 ∼40 K), which could be associated with either the antiferromagnetic ordering of the Sm sublattice or a spin reorientation in the Cr sublattice. ((orig.))

  6. Synthesis of low resistive polycrystalline PrBa2Cu3O7

    International Nuclear Information System (INIS)

    Kawanaka, H.; Saitoh, A.; Bando, H.; Nishihara, Y.

    2006-01-01

    We have studied difference in electrical transport properties of polycrystalline PrBa 2 Cu 3 O 7 (Pr123) by changes in synthesis conditions. As raw material we used the carbon free 3N-BaO 2 and the tetravalent Pr free 3N-Pr 2 O 3 . These raw materials are mixed with CuO and reacted in Ar atmosphere with low oxygen concentration. The temperature dependence of resistivity shows almost semiconductive behavior for all the samples. However, when the samples were prefired in Ar atmosphere with 0.2-0.4% oxygen concentration, the absolute value of resistivity at room temperature decreased to the value close to that of YBa 2 Cu 3 O 7 superconductor. From these results we think that the control of site occupation of Pr atoms is important to give the low resistive Pr123

  7. Analysis on the phase transition behavior of Cu base bulk metallic glass by electrical resistivity measurement

    International Nuclear Information System (INIS)

    Ji, Young Su; Chung, Sung Jae; Ok, Myoung-Ryul; Hong, Kyung Tae; Suh, Jin-Yoo; Byeon, Jai Won; Yoon, Jin-Kook; Lee, Kyung Hwan; Lee, Kyung Sub

    2007-01-01

    The crystallization behavior of Cu 43 Zr 43 Al 7 Ag 7 (numbers indicate at.%) bulk metallic glass was investigated using the isothermal electrical resistivity measurements at 450 deg. C in the supercooled liquid region. The crystallization process is a single step phase transformation. To analyze the electrical resistivity reduction, microstructure evolutions were analyzed using differential scanning calorimetry, X-ray diffraction, transmission electron microscopy and small-angle X-ray scattering. The Avrami parameter of the electrical resistivity reduction step was 1.73, indicating that the crystallization process is a diffusion-controlled growth of intermetallic compounds with decreasing nucleation rate

  8. New insights on the synthesis and electronic transport in bulk polycrystalline Pr-doped SrTiO3−δ

    KAUST Repository

    Dehkordi, Arash Mehdizadeh

    2015-02-07

    Recently, we have reported a significant enhancement in the electronic and thermoelectric properties of bulk polycrystalline SrTiO3 ceramics via praseodymium doping. This improvement was originated from the simultaneous enhancement in the thermoelectric power factor and reduction in thermal conductivity, which was contributed to the non-uniform distribution of Pr dopants. In order to further understand the underlying mechanism, we herein investigate the role of praseodymium doping source (Pr2O3 versus Pr6O11) on the synthesis and electronic transport in Pr-doped SrTiO3 ceramics. It was observed that the high-temperature electronic transport properties are independent of the choice of praseodymium doping source for samples prepared following our synthesis strategy. Theoretical calculations were also performed in order to estimate the maximum achievable power factor and the corresponding optimal carrier concentration. The result suggests the possibility of further improvement of the power factor. This study should shed some light on the superior electronic transport in bulk polycrystalline Pr-doped SrTiO3 ceramics and provide new insight on further improvement of the thermoelectric power factor.

  9. Oxidation of Helix-3 methionines precedes the formation of PK resistant PrP.

    Directory of Open Access Journals (Sweden)

    Tamar Canello

    2010-07-01

    Full Text Available While elucidating the peculiar epitope of the alpha-PrP mAb IPC2, we found that PrPSc exhibits the sulfoxidation of residue M213 as a covalent signature. Subsequent computational analysis predicted that the presence of sulfoxide groups at both Met residues 206 and 213 destabilize the alpha-fold, suggesting oxidation may facilitate the conversion of PrPC into PrPSc. To further study the effect of oxidation on prion formation, we generated pAbs to linear PrP peptides encompassing the Helix-3 region, as opposed to the non-linear complexed epitope of IPC2. We now show that pAbs, whose epitopes comprise Met residues, readily detected PrPC, but could not recognize most PrPSc bands unless they were vigorously reduced. Next, we showed that the alpha-Met pAbs did not recognize newly formed PrPSc, as is the case for the PK resistant PrP present in lines of prion infected cells. In addition, these reagents did not detect intermediate forms such as PK sensitive and partially aggregated PrPs present in infected brains. Finally, we show that PrP molecules harboring the pathogenic mutation E200K, which is linked to the most common form of familial CJD, may be spontaneously oxidized. We conclude that the oxidation of methionine residues in Helix-3 represents an early and important event in the conversion of PrPC to PrPSc. We believe that further investigation into the mechanism and role of PrP oxidation will be central in finally elucidating the mechanism by which a normal cell protein converts into a pathogenic entity that causes fatal brain degeneration.

  10. Grain size effect on electrical resistivity of bulk nanograined Bi2Te3 material

    International Nuclear Information System (INIS)

    Ivanov, Oleg; Maradudina, Oxana; Lyubushkin, Roman

    2015-01-01

    The bulk nanograined Bi 2 Te 3 material with various mean grain sizes changing from ~ 97 nm to ~ 51 nm was prepared by microwave assisted solvothermal method and hot pseudo-isostatic pressure. It was found that the specific electrical resistivity of the material increases as mean grain size decreases. Such kind of the grain effect on the resistivity can be attributed to enhanced electron scattering at the grain boundaries. The Mayadas–Shatzkes model was applied to explain experimental results. In this model the grain boundaries are regarded as potential barriers which have to be overcome by the electrons. The reflectivity R of the grain boundaries for the material under study was estimated to be equal to ~ 0.7. - Highlights: • The bulk nanograined Bi 2 Te 3 material with various mean grain sizes was prepared. • It was found that the electrical resistivity of the material increases as grain size decreases. • The Mayadas–Shatzkes model was applied to explain experimental results. • The reflectivity R of the grain boundaries was estimated to be equal to ~ 0.7

  11. Lipid interaction converts prion protein to a PrPSc-like proteinase K-resistant conformation under physiological conditions.

    Science.gov (United States)

    Wang, Fei; Yang, Fan; Hu, Yunfei; Wang, Xu; Wang, Xinhe; Jin, Changwen; Ma, Jiyan

    2007-06-12

    The conversion of prion protein (PrP) to the pathogenic PrPSc conformation is central to prion disease. Previous studies revealed that PrP interacts with lipids and the interaction induces PrP conformational changes, yet it remains unclear whether in the absence of any denaturing treatment, PrP-lipid interaction is sufficient to convert PrP to the classic proteinase K-resistant conformation. Using recombinant mouse PrP, we analyzed PrP-lipid interaction under physiological conditions and followed lipid-induced PrP conformational change with proteinase K (PK) digestion. We found that the PrP-lipid interaction was initiated by electrostatic contact and followed by hydrophobic interaction. The PrP-lipid interaction converted full-length alpha-helix-rich recombinant PrP to different forms. A significant portion of PrP gained a conformation reminiscent of PrPSc, with a PrPSc-like PK-resistant core and increased beta-sheet content. The efficiency for lipid-induced PrP conversion depended on lipid headgroup structure and/or the arrangement of lipids on the surface of vesicles. When lipid vesicles were disrupted by Triton X-100, PrP aggregation was necessary to maintain the lipid-induced PrPSc-like conformation. However, the PK resistance of lipid-induced PrPSc-like conformation does not depend on amyloid fiber formation. Our results clearly revealed that the lipid interaction can overcome the energy barrier and convert full-length alpha-helix-rich PrP to a PrPSc-like conformation under physiological conditions, supporting the relevance of lipid-induced PrP conformational change to in vivo PrP conversion.

  12. Superionic Conductivity of Sm3+, Pr3+, and Nd3+ Triple-Doped Ceria through Bulk and Surface Two-Step Doping Approach.

    Science.gov (United States)

    Liu, Yanyan; Fan, Liangdong; Cai, Yixiao; Zhang, Wei; Wang, Baoyuan; Zhu, Bin

    2017-07-19

    Sufficiently high oxygen ion conductivity of electrolyte is critical for good performance of low-temperature solid oxide fuel cells (LT-SOFCs). Notably, material conductivity, reliability, and manufacturing cost are the major barriers hindering LT-SOFC commercialization. Generally, surface properties control the physical and chemical functionalities of materials. Hereby, we report a Sm 3+ , Pr 3+ , and Nd 3+ triple-doped ceria, exhibiting the highest ionic conductivity among reported doped-ceria oxides, 0.125 S cm -1 at 600 °C. It was designed using a two-step wet-chemical coprecipitation method to realize a desired doping for Sm 3+ at the bulk and Pr 3+ /Nd 3+ at surface domains (abbreviated as PNSDC). The redox couple Pr 3+ /Pr 4+ contributes to the extraordinary ionic conductivity. Moreover, the mechanism for ionic conductivity enhancement is demonstrated. The above findings reveal that a joint bulk and surface doping methodology for ceria is a feasible approach to develop new oxide-ion conductors with high impacts on advanced LT-SOFCs.

  13. Inheritance and Bulked Segregant Analysis of Leaf Rust and Stem Rust Resistance in Durum Wheat Genotypes.

    Science.gov (United States)

    Aoun, Meriem; Kolmer, James A; Rouse, Matthew N; Chao, Shiaoman; Bulbula, Worku Denbel; Elias, Elias M; Acevedo, Maricelis

    2017-12-01

    Leaf rust, caused by Puccinia triticina, and stem rust, caused by P. graminis f. sp. tritici, are important diseases of durum wheat. This study determined the inheritance and genomic locations of leaf rust resistance (Lr) genes to P. triticina race BBBQJ and stem rust resistance (Sr) genes to P. graminis f. sp. tritici race TTKSK in durum accessions. Eight leaf-rust-resistant genotypes were used to develop biparental populations. Accessions PI 192051 and PI 534304 were also resistant to P. graminis f. sp. tritici race TTKSK. The resulting progenies were phenotyped for leaf rust and stem rust response at seedling stage. The Lr and Sr genes were mapped in five populations using single-nucleotide polymorphisms and bulked segregant analysis. Five leaf-rust-resistant genotypes carried single dominant Lr genes whereas, in the remaining accessions, there was deviation from the expected segregation ratio of a single dominant Lr gene. Seven genotypes carried Lr genes different from those previously characterized in durum. The single dominant Lr genes in PI 209274, PI 244061, PI387263, and PI 313096 were mapped to chromosome arms 6BS, 2BS, 6BL, and 6BS, respectively. The Sr gene in PI 534304 mapped to 6AL and is most likely Sr13, while the Sr gene in PI 192051 could be uncharacterized in durum.

  14. [Properties of live antibiotics-resistant anthrax vaccine STI-PR after long-term storage].

    Science.gov (United States)

    Aksenova, L Iu; Buravtseva, N P; Kogotkova, O I; Eremenko, E I; Tsygankova, O I

    2007-01-01

    Study showed that cultural, morphologic, genetic, immunologic characteristics, and resistance to antibiotics of STI-PR anthrax vaccine did not change after storage during 20 years in lyophilized condition. It has been shown that medium for lyophilization plays important role in preservation of vitality of anthrax spores. Optimal preservative properties have been observed for thioureal and sucrose-gelatinous media for lyophilization. Obtained results give reasons for prolongation of shelf live of STI-PR vaccine from 2 - 3 to 5 - 8 years.

  15. Electrical resistance behavior with gamma radiation dose in bulk carbon nanostrutured samples

    International Nuclear Information System (INIS)

    Lage, J.; Leyva, A.; Pinnera, I.; Desdin, L. F.; Abreu, Y.; Cruz, C. M.; Leyva, D.; Toledo, C.

    2013-01-01

    The aim of this paper is to study the effects of 60 Co gamma radiation on the electrical resistance and V-I characteristic of bulk carbon nano structured samples obtained by electric arc discharge in water method. Images of pristine samples obtained with scanning electron, and the results in graphical form of the electrical characterization of irradiated samples are presented in the text. It was observed that the electrical resistance vs. dose behavior shows an initial increment reaching the maximum at approximately 135 kGy, followed by a drop of the resistance values. These behaviors are associated with the progressive generation of radiation induced defects in the sample, whose number increases to reach saturation at 135 kGy. From this dose, defects could lead to cross-links between different nano structures present in the sample conducting to a gradually drop in electrical resistance. The measured V-I curves show that, increasing exposure to the 60 Co gamma radiation, the electrical properties of the studied samples transit from a semiconductor towards a predominantly metallic behavior. These results were compared with those obtained for a sample of graphite powder irradiated under the same conditions. (Author)

  16. Soil resistivity over root area ratio, soil humidity, and bulk density: laboratory tests

    Science.gov (United States)

    Guastini, Enrico; Giambastiani, Yamuna; Preti, Federico

    2015-04-01

    Knowledge about root system distribution covers an important role in slope shallow stability stud-ies, as this factor grants an increase in soil geotechnical properties (soil cohesion and friction an-gle) and determines a different underground water circulation. Published studies (Amato et al., 2008 and 2011; Censini et al., 2014) about in situ application of ERT (Electrical Resistivity Tomo-graphy) analysis show how the root presence affects the measurable soil resistivity values, confirm-ing the suitability to investigate the application of such technique, aiming to estimate root density in soil with an indirect and non-invasive method. This study, laboratory-based and led on reconstructed samples in controlled condition, aim to find a correlation between the resistivity variations and the various factors that can affect them (humid-ity, bulk density, presence of foreign bodies, temperature). The tests involved a clay-loam soil (USDA classification) taken from Quaracchi (Florence, Italy), in an experimental fir-wood (Picea abies) owned by the Department of Agricultural, Food and For-estry System, Florence University, a previously chosen site for field ERT applications. The row ma-terial has been dried out in a lab stove, grounded and sieved at 2 mm, and then placed in a lexan box (30 x 20 x 20 cm) without compaction. Inside the sample have been inserted 3 series of 4 iron electrodes, insulated along the shaft and with the conductive end placed at three different depth: 2 cm from surface, in the middle of the sample and in contact with the bottom of the box; resistivity measures are conducted on the three levels using a Syscal R2 with electrodes connected in a dipole-dipole configuration. Root presence is simulated inserting bamboo spits (simple geometry, replicable "R.A.R.") in varying number from 0 to 16 in every area between two contiguous electrodes. The tests are repeated in time, monitoring the natural variations in humidity (evapotranspiration) and bulk

  17. A comparison of the structure of the PK-sensitive and PK-resistant forms of PrPSc(Abstract)

    Science.gov (United States)

    Background/Introduction. One of the distinctive phenotypes of the infectious isoform of PrP(PrPSc)is its resistance to proteinase K (PK) digestion. The diagnosis of prion diseases is based on this phenotypic observation. More recently, researchers determined that there is a sizeable fraction of PrPS...

  18. Low fraction of the 222K PrP variant in the protease-resistant moiety of PrPres in heterozygous scrapie positive goats.

    Science.gov (United States)

    Mazza, Maria; Guglielmetti, Chiara; Ingravalle, Francesco; Brusadore, Sonia; Langeveld, Jan P M; Ekateriniadou, Loukia V; Andréoletti, Olivier; Casalone, Cristina; Acutis, Pier Luigi

    2017-07-01

    The presence of lysine (K) at codon 222 has been associated with resistance to classical scrapie in goats, but few scrapie cases have been identified in 222Q/K animals. To investigate the contribution of the 222K variant to PrPres formation in natural and experimental Q/K scrapie cases, we applied an immunoblotting method based on the use of two different monoclonal antibodies, F99/97.6.1 and SAF84, chosen for their different affinities to 222K and 222Q PrP variants. Our finding that PrPres seems to be formed nearly totally by the 222Q variant provides evidence that the 222K PrP variant confers resistance to conversion to PrPres formation and reinforces the view that this mutation has a protective role against classical scrapie in goats.

  19. Abundance and transferability of antibiotic resistance as related to the fate of sulfadiazine in maize rhizosphere and bulk soil.

    Science.gov (United States)

    Kopmann, Christoph; Jechalke, Sven; Rosendahl, Ingrid; Groeneweg, Joost; Krögerrecklenfort, Ellen; Zimmerling, Ute; Weichelt, Viola; Siemens, Jan; Amelung, Wulf; Heuer, Holger; Smalla, Kornelia

    2013-01-01

    Veterinary antibiotics entering agricultural land with manure pose the risk of spreading antibiotic resistance. The fate of sulfadiazine (SDZ) introduced via manure and its effect on resistance gene levels in the rhizosphere were compared with that in bulk soil. Maize plants were grown for 9 weeks in soil fertilized with manure either from SDZ-treated pigs (SDZ treatment) or from untreated pigs (control). CaCl(2) -extractable concentrations of SDZ dissipated faster in the rhizosphere than in bulk soil, but SDZ remained detectable over the whole time. For bulk soil, the abundance of sul1 and sul2 relative to 16S rRNA gene copies was higher in the SDZ treatment than in the control, as revealed by quantitative PCR on days 14 and 63. In the rhizosphere, sampled on day 63, the relative sul gene abundances were also significantly increased in the SDZ treatment. The accumulated SDZ exposure (until day 63) of the bacteria significantly correlated with the log relative abundance of sul1 and sul2, so that these resistance genes were less abundant in the rhizosphere than in bulk soil. Plasmids conferring SDZ resistance, which were exogenously captured in Escherichia coli, mainly belonged to the LowGC group and carried a heterogeneous load of resistances to different classes of antibiotics. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

  20. Radiation studies on resistive bulk-micromegas chambers at the CERN Gamma Irradiation Facility

    CERN Document Server

    Alvarez Gonzalez, Barbara; Camerlingo, Maria Teresa; Farina, Edoardo; Iengo, Paolo; Longo, Luigi; Samarati, Jerome; Sidiropoulou, Ourania; Wotschack, Joerg

    2018-01-01

    With the growing diffusion of resistive Micromegas detectors in HEP experiments the study of long-term aging behaviour is becoming more and more relevant. Two resistive bulk-Micromegas detectors were installed in May 2015 at the CERN Gamma Irradiation Facility and exposed to an intense gamma irradiation with the aim to study the detector behavior under high irradiation and the long-term aging. The detectors have an active area of 10 × 10 cm 2 , readout strip pitch of 400 μ m , amplification gap of 128 μ m and drift gap of 5 mm. The desired accumulated charge of more than 0.2 C/cm 2 has been reached for both chambers, equivalent to 10 years of HL-LHC operation. The efficiency, amplification, and resolution of the Micromegas after this long-term irradiation period is compared with the performance of a non irradiated detector. In addition, the latest results of the measured particle rate as a function of the amplification voltage is presented and compared with those obtained in 2015.

  1. Non-Magnetic, Tough, Corrosion- and Wear-Resistant Knives From Bulk Metallic Glasses and Composites

    Science.gov (United States)

    Hoffman, Douglas C.; Potter, Benjamin

    2013-01-01

    Quality knives are typically fabricated from high-strength steel alloys. Depending on the application, there are different requirements for mechanical and physical properties that cause problems for steel alloys. For example, diver's knives are generally used in salt water, which causes rust in steel knives. Titanium diver's knives are a popular alternative due to their salt water corrosion resistance, but are too soft to maintain a sharp cutting edge. Steel knives are also magnetic, which is undesirable for military applications where the knives are used as a tactical tool for diffusing magnetic mines. Steel is also significantly denser than titanium (8 g/cu cm vs. 4.5 g/cu cm), which results in heavier knives for the same size. Steel is hard and wear-resistant, compared with titanium, and can keep a sharp edge during service. A major drawback of both steel and titanium knives is that they must be ground or machined into the final knife shape from a billet. Since most knives have a mirrored surface and a complex shape, manufacturing them is complex. It would be more desirable if the knife could be cast into a net or near-net shape in a single step. The solution to the deficiencies of titanium, steel, and ceramic knives is to fabricate them using bulk metallic glasses (or composites). These alloys can be cast into net or near-net shaped knives with a combination of properties that exceed both titanium and steel. A commercially viable BMG (bulk metallic glass) or composite knife is one that exhibits one or all of the following properties: It is based on titanium, has a self-sharpening edge, can retain an edge during service, is hard, is non-magnetic, is corrosion-resistant against a variety of corrosive environments, is tough (to allow for prying), can be cast into a net-shape with a mirror finish and a complex shape, has excellent wear resistance, and is low-density. These properties can be achieved in BMG and composites through alloy chemistry and processing. For

  2. RETRACTED: Study on the magnetic viscosity of Nd45Pr15Fe30-xCoxAl10 (x=0, 10) bulk amorphous Alloys

    Science.gov (United States)

    Qi, Guoquan; Fan, Haiping; Wu, Gang; Song, Shengyin; Wei, Dong; Bai, Qiang

    2013-06-01

    The bulk amorphous Nd45Pr15Fe30-xCoxAl10 (x=0, 10) alloys, which were prepared by arc melting and investigated by XRD and VSM, present hard magnetic behavior at room temperature. The intrinsic coercivity of the bulk amorphous increased with increasing Co addition. A single sharp and narrow peak close to the coercivity appeared in the irreversible susceptibility (χirr) curve for each alloy. The addition of Co has little influence on the magnetic viscosity of the alloys. With the substitution of Co for Fe, the fluctuation field Hf increased from 9.9 mT to 11.5 mT, and the activation volume Va increased from 2.9×10-18 cm3 to 3.6×10-18 cm3, which leads to an increase of the activation diameter Da from 17.7 nm to 19.0 nm. The value of Da deduced from the magnetic viscosity measurements is similar to the size of clusters of Nd-based bulk amorphous alloys, which may be responsible for the hard magnetic property exhibited at room temperature.

  3. The physical mechanism of magnetic field controlled magnetocaloric effect and magnetoresistance in bulk PrGa compound

    Science.gov (United States)

    Zheng, X. Q.; Wu, H.; Chen, J.; Zhang, B.; Li, Y. Q.; Hu, F. X.; Sun, J. R.; Huang, Q. Z.; Shen, B. G.

    2015-01-01

    The PrGa compound shows excellent performance on the magnetocaloric effect (MCE) and magnetoresistance (MR). The physical mechanism of MCE and MR in PrGa compound was investigated and elaborated in detail on the basis of magnetic measurement, heat capacity measurement and neutron powder diffraction (NPD) experiment. New types of magnetic structure and magnetic transition are found. The results of the NPD along with the saturation magnetic moment (MS) and magnetic entropy (SM) indicate that the magnetic moments are randomly distributed within the equivalent conical surface in the ferromagnetic (FM) temperature range. PrGa compound undergoes an FM to FM transition and an FM to paramagnetic (PM) transition as temperature increases. The magnetizing process was discussed in detail and the physical mechanism of the magnetic field controlled magnetocaloric effect (MCE) and the magnetoresistance (MR) was studied. The formation of the plateau on MCE curve was explained and MR was calculated in detail on the basis of the magnetic structure and the analysis of the magnetizing process. The experimental results are in excellent agreement with the calculations. Finally, the expression of MR = β(T)X2 and its application conditions were discussed, where X is M(H)/Meff, and Meff is the paramagnetic effective moment. PMID:26455711

  4. Hard magnetic properties of bulk and powder (Pr,R)-Fe-B-Cu(R=Tb,Dy) alloys

    Energy Technology Data Exchange (ETDEWEB)

    Popov, A.G.; Ermolenko, A.S.; Belozerov, Ye.V.; Gaviko, V.S.; Puzanova, T.Z. [Rossijskaya Akademiya Nauk, Ekaterinburg (Russian Federation). Inst. Fiziki Metallov; Gabay, A.M.; Kim, A.S. [YBM Magnex Inc., Newtown PA (United States)

    1998-07-01

    The effect of mechanical grinding on hard magnetic properties of (Pr{sub 1-x}R{sub x}){sub y}Fe{sub 94.8-y-z}B{sub 5.2}Cu{sub z} have been investigated for x=0-0.3, y=13-20, z=0-1.5. Additions of Tb were found to be more effective to improve coercivity of ground powders, whereas those of Dy were more effective to improve coercivity of annealed cast alloys. The obtained anisotropic hard magnetic powders may be used for polymer-bonded magnets. (orig.)

  5. Contact resistance problems applying ERT on low bulk density forested stony soils. Is there a solution?

    Science.gov (United States)

    Deraedt, Deborah; Touzé, Camille; Robert, Tanguy; Colinet, Gilles; Degré, Aurore; Garré, Sarah

    2015-04-01

    contact resistance reduced to 5222 Ω. This improved the contact resistance substantially, but complicates the execution of a pulse tracer experiment. To date we did not find any better solution to this problem and we keep searching a way to improve the contact resistance in stony forested soils with very low bulk density. We would like to exchange on these questions with EGU attendees in order to improve the experimental design or point out a new research path for these specific conditions. This could lead to enhance the use of ERT in soils with low density and high stone content.

  6. Investigation of the thermal resistance of timber attic spaces with reflective foil and bulk insulation, heat flow up

    Energy Technology Data Exchange (ETDEWEB)

    Belusko, M.; Bruno, F.; Saman, W. [Institute for Sustainable Systems and Technologies, University of South Australia, Mawson Lakes Boulevard, SA 5095 (Australia)

    2011-01-15

    An experimental investigation was undertaken in which the thermal resistance for the heat flow through a typical timber framed pitched roofing system was measured under outdoor conditions for heat flow up. The measured thermal resistance of low resistance systems such as an uninsulated attic space and a reflective attic space compared well with published data. However, with higher thermal resistance systems containing bulk insulation within the timber frame, the measured result for a typical installation was as low as 50% of the thermal resistance determined considering two dimensional thermal bridging using the parallel path method. This result was attributed to three dimensional heat flow and insulation installation defects, resulting from the design and construction method used. Translating these results to a typical house with a 200 m{sup 2} floor area, the overall thermal resistance of the roof was at least 23% lower than the overall calculated thermal resistance including two dimensional thermal bridging. When a continuous layer of bulk insulation was applied to the roofing system, the measured values were in agreement with calculated resistances representing a more reliable solution. (author)

  7. Aging studies of resistive bulk Micromegas chambers for the ATLAS muon spectrometer upgrade

    CERN Document Server

    Spencer, Katie Louise

    2017-01-01

    A long-term operation study is presented as a probe of the aging properties of two bulk-resistive Micromegas chambers installed at the GIF$^{++}$ Gamma Irradiation Facility at CERN. Trends in the instantaneous chamber current, recorded over $\\approx$ 500 days of sustained exposure to the GIF$^{++}$ high intensity photon source, are analysed as a function of time in order to identify any signs of detector aging. As part of the study, additional variations in the current due to the changing external conditions of the chambers must be corrected for in order to isolate any aging effects. These include the changing chamber positions with respect to the photon source and the temperature and pressure fluctuations of the detector gas medium. Due to a number of subsets of the total irradiation period in which the exact detector positions are unknown, the aging study at the present time remains inconclusive. As a result, an alternative long-term aging study utilising the instantaneous chamber dark currents is suggested...

  8. Millimeter wave surface resistance of grain-aligned Y1Ba2Cu3O(x) bulk material

    International Nuclear Information System (INIS)

    Wosik, J.; Kranenburg, R.A.; Wolfe, J.C.; Selvamanickam, V.; Salama, K.

    1990-04-01

    Measurements are reported of the millimeter-wave surface resistance of grain-aligned YBa2Cu3O(x) bulk material grown by a liquid-phase process. The measurements were performed by replacing the endplate of a TE(011) cylindrical copper cavity with the superconducting sample. Surface resistance was measured for samples with surfaces oriented perpendicular and parallel to the c-axis of the grains. For the parallel configuration, the surface resistance at 77 K and 80 GHz is given. For a very well-aligned sample with a very low density of Y2BaCuO(y) precipitates, measured in the perpendicular configuration, the transition width (10-90 percent) is about 2 K and the surface resistance is derived at 88 K. The effect of microstructure on surface resistance is discussed. 19 refs

  9. Millimeter wave surface resistance of grain-aligned Y1Ba2Cu3O(x) bulk material

    Science.gov (United States)

    Wosik, J.; Kranenburg, R. A.; Wolfe, J. C.; Selvamanickam, V.; Salama, K.

    1991-01-01

    Measurements of the millimeter wave surface resistance of grain-aligned YBa2Cu3O(x) bulk material grown by a liquid phase process are reported. The measurements were performed by replacing the endplate of a TE011 cylindrical copper cavity with the superconducting sample. Surface resistance was measured for samples with surfaces oriented perpendicular and parallel to the c-axis of the grains. It is shown that, for the parallel configuration, the surface resistance at 77 K and 80 GHz is typically near 100 milliohms. For a very well-aligned sample with a very low density of Y2BaCuO(y) precipitates, measured in the perpendicular configuration, the transition width (10-90 percent) is about 2 K, and the surface resistance is less than 50 milliohms at 88 K. The effect of microstructure on surface resistance is discussed.

  10. Millimeter wave surface resistance of grain-aligned Y1Ba2Cu3Ox bulk material

    International Nuclear Information System (INIS)

    Wosik, J.; Kranenburg, R.A.; Wolfe, J.C.; Selvamanickam, V.; Salama, K.

    1991-01-01

    We report measurements of the millimeter wave surface resistance of grain-aligned YBa 2 Cu 3 O x bulk material grown by a liquid phase process. The measurements were performed by replacing the endplate of a TE 011 cylindrical copper cavity with the superconducting sample. Surface resistance was measured for samples with surfaces oriented perpendicular and parallel to the c-axis of the grains. We show that, for the parallel configuration, the surface resistance at 77 K and 80 GHz is typically near 100 mΩ. For a very well-aligned sample with a very low density of Y 2 BaCuO y precipitates, measured in the perpendicular configuration, the transition width (10%--90%) is about 2 K and the surface resistance is less than 50 mΩ at 88 K. The effect of microstructure on surface resistance is discussed

  11. The Experimental Measurement of Local and Bulk Oxygen Transport Resistances in the Catalyst Layer of Proton Exchange Membrane Fuel Cells.

    Science.gov (United States)

    Wang, Chao; Cheng, Xiaojing; Lu, Jiabin; Shen, Shuiyun; Yan, Xiaohui; Yin, Jiewei; Wei, Guanghua; Zhang, Junliang

    2017-12-07

    Remarkable progress has been made in reducing the cathodic Pt loading of PEMFCs; however, a huge performance loss appears at high current densities, indicating the existence of a large oxygen transport resistance associated with the ultralow Pt loading catalyst layer. To reduce the Pt loading without sacrificing cell performance, it is essential to illuminate the oxygen transport mechanism in the catalyst layer. Toward this goal, an experimental approach to measure the oxygen transport resistance in catalyst layers is proposed and realized for the first time in this study. The measuring approach involves a dual-layer catalyst layer design, which consists of a dummy catalyst layer and a practical catalyst layer, followed by changing the thickness of dummy layer to respectively quantify the local and bulk resistances via limiting current measurements combined with linear extrapolation. The experimental results clearly reveal that the local resistance dominates the total resistance in the catalyst layer.

  12. GPR and bulk ground resistivity surveys in graveyards: locating unmarked burials in contrasting soil types.

    Science.gov (United States)

    Hansen, James D; Pringle, Jamie K; Goodwin, Jon

    2014-04-01

    With graveyards and cemeteries globally being increasingly designated as full, there is a growing need to identify unmarked burial positions to find burial space or exhume and re-inter if necessary. In some countries, for example the U.S. and U.K., burial sites are not usually re-used; however, most graveyard and cemetery records do not have maps of positions. One non-invasive detection method is near-surface geophysics, but there has been a lack of research to-date on optimal methods and/or equipment configuration. This paper presents three case studies in contrasting burial environments, soil types, burial styles and ages in the U.K. Geophysical survey results reveal unmarked burials could be effectively identified from these case studies that were not uniform or predicted using 225 MHz frequency antennae GPR 2D 0.5 m spaced profiles. Bulk ground electrical surveys, rarely used for unmarked burials, revealed 1 m probe spacings were optimal compared to 0.5 m, with datasets needing 3D detrending to reveal burial positions. Results were variable depending upon soil type; in very coarse soils GPR was optimal; whereas resistivity was optimal in clay-rich soils and both were optimal in sandy and black earth soils. Archaeological excavations revealed unmarked burials, extra/missing individuals from parish records and a variety of burial styles from isolated, brick-lined, to vertically stacked individuals. Study results, evidence unmarked burial targets were significantly different from clandestine burials of murder victims which are used as analogues. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  13. Two pathways act in an additive rather than obligatorily synergistic fashion to induce systemic acquired resistance and PR gene expression

    Directory of Open Access Journals (Sweden)

    Shapiro Allan D

    2002-10-01

    Full Text Available Abstract Background Local infection with necrotizing pathogens induces whole plant immunity to secondary challenge. Pathogenesis-related genes are induced in parallel with this systemic acquired resistance response and thought to be co-regulated. The hypothesis of co-regulation has been challenged by induction of Arabidopsis PR-1 but not systemic acquired resistance in npr1 mutant plants responding to Pseudomonas syringae carrying the avirulence gene avrRpt2. However, experiments with ndr1 mutant plants have revealed major differences between avirulence genes. The ndr1-1 mutation prevents hypersensitive cell death, systemic acquired resistance and PR-1 induction elicited by bacteria carrying avrRpt2. This mutation does not prevent these responses to bacteria carrying avrB. Results Systemic acquired resistance, PR-1 induction and PR-5 induction were assessed in comparisons of npr1-2 and ndr1-1 mutant plants, double mutant plants, and wild-type plants. Systemic acquired resistance was displayed by all four plant lines in response to Pseudomonas syringae bacteria carrying avrB. PR-1 induction was partially impaired by either single mutation in response to either bacterial strain, but only fully impaired in the double mutant in response to avrRpt2. PR-5 induction was not fully impaired in any of the mutants in response to either avirulence gene. Conclusion Two pathways act additively, rather than in an obligatorily synergistic fashion, to induce systemic acquired resistance, PR-1 and PR-5. One of these pathways is NPR1-independent and depends on signals associated with hypersensitive cell death. The other pathway is dependent on salicylic acid accumulation and acts through NPR1. At least two other pathways also contribute additively to PR-5 induction.

  14. Very High-Temperature Reactor (VHTR) Proliferation Resistance and Physical Protection (PR&PP)

    Energy Technology Data Exchange (ETDEWEB)

    Moses, David Lewis [ORNL

    2011-10-01

    This report documents the detailed background information that has been compiled to support the preparation of a much shorter white paper on the design features and fuel cycles of Very High-Temperature Reactors (VHTRs), including the proposed Next-Generation Nuclear Plant (NGNP), to identify the important proliferation resistance and physical protection (PR&PP) aspects of the proposed concepts. The shorter white paper derived from the information in this report was prepared for the Department of Energy Office of Nuclear Science and Technology for the Generation IV International Forum (GIF) VHTR Systems Steering Committee (SSC) as input to the GIF Proliferation Resistance and Physical Protection Working Group (PR&PPWG) (http://www.gen-4.org/Technology/horizontal/proliferation.htm). The short white paper was edited by the GIF VHTR SCC to address their concerns and thus may differ from the information presented in this supporting report. The GIF PR&PPWG will use the derived white paper based on this report along with other white papers on the six alternative Generation IV design concepts (http://www.gen-4.org/Technology/systems/index.htm) to employ an evaluation methodology that can be applied and will evolve from the earliest stages of design. This methodology will guide system designers, program policy makers, and external stakeholders in evaluating the response of each system, to determine each system's resistance to proliferation threats and robustness against sabotage and terrorism threats, and thereby guide future international cooperation on ensuring safeguards in the deployment of the Generation IV systems. The format and content of this report is that specified in a template prepared by the GIF PR&PPWG. Other than the level of detail, the key exception to the specified template format is the addition of Appendix C to document the history and status of coated-particle fuel reprocessing technologies, which fuel reprocessing technologies have yet to be

  15. Temperature and volumetric water content petrophysical relationships in municipal solid waste for the interpretation of bulk electrical resistivity data

    Science.gov (United States)

    Pilawski, Tamara; Dumont, Gaël; Nguyen, Frédéric

    2015-04-01

    Landfills pose major environmental issues including long-term methane emissions, and local pollution of soil and aquifers but can also be seen as potential energy resources and mining opportunities. Water content in landfills determine whether solid fractions can be separated and recycled, and controls the existence and efficiency of natural or enhanced biodegradation. Geophysical techniques, such as electrical and electromagnetic methods have proven successful in the detection and qualitative investigation of sanitary landfills. However, their interpretation in terms of quantitative water content estimates makes it more challenging due to the influence of parameters such as temperature, compaction, waste composition or pore fluid. To improve the confidence given to bulk electrical resistivity data and to their interpretation, we established temperature and volumetric water content petrophysical relationships that we tested on field and laboratory electrical resistivity measurements. We carried out two laboratory experiments on leachates and waste samples from a landfill located in Mont-Saint-Guibert, Belgium. We determined a first relationship between temperature and electrical resistivity with pure and diluted leachates by progressively increasing the temperature from 5°C to 65°C, and then cooling down to 5°C. The second relationship was obtained by measuring electrical resistivity on waste samples of different volumetric water contents. First, we used the correlations obtained from the experiments to compare electrical resistivity measurements performed in a landfill borehole and on reworked waste samples excavated at different depths. Electrical resistivities were measured every 20cm with an electromagnetic logging device (EM39) while a temperature profile was acquired with optic fibres. Waste samples were excavated every 2m in the same borehole. We filled experimental columns with these samples and measured electrical resistivities at laboratory temperature

  16. Microwave surface resistance of bulk YBa2Cu3O6+x material

    Science.gov (United States)

    Fathy, A.; Kalokitis, D.; Belohoubek, E.; Sundar, H. G. K.; Safari, A.

    1988-10-01

    Superconducting Y-Ba-Cu-O samples were prepared by conventional solid-state reaction. The microwave surface resistance of 1:2:3 compound superconductor material was measured in a special disk resonator structure at 10 GHz. At liquid-nitrogen temperatures the microwave surface resistance is comparable to that of Au. At lower temperature (~10 K) the surface resistance is an order of magnitude lower than that of Au at the same temperature.

  17. Magnetic and electrical resistivity studies of Pr1-xTiO3

    International Nuclear Information System (INIS)

    Yoshii, Kenji; Nakamura, Akio

    2000-01-01

    Magnetic, electrical and structural properties were investigated for the lanthanide deficient perovskite Pr 1-x TiO 3 (0 ≤ x ≤ 0.1). The crystal structures were refined as the orthorhombic perovskite type (Pnma; GdFeO 3 type). The end compound PrTiO 3 exhibited a two-step magnetic transition at T N =120 K and T' N - 60 K, as reported previously. The ordering temperatures and ordered magnetization below T N decreased monotonically with increasing x. Finally, magnetic order almost disappeared at x=0.1. Corresponding to the disappearance in magnetic order, the system changed into a paramagnetic metal from a magnetic insulator between x=0.05 and 0.1. A resistivity-temperature (ρ-T) curve of x=0.05 exhibited a characteristic plateau at 100-170 K, while semiconductive behavior was observed above and below this region. In addition, magnetization-field (M-H) curves with x ≤ 0.05 showed spin-flop and/or metamagnetic transitions around 15,000 Oe below T' N , and discontinuous jumps of magnetization at 2 K. (author)

  18. Performance studies under high irradiation of resistive bulk-micromegas chambers at the CERN Gamma Irradiation Facility

    CERN Document Server

    Sidiropoulou, Ourania; Bortfeldt, J; Farina, E; Iengo, P; Longo, L; Sidiropoulou, O; Wotschack, J

    2017-01-01

    Radiation studies on several resistive bulk-Micromegas chambers produced at CERN will be viewed in this document. Two resistive bulk-Micromegas chambers have been installed at the CERN Gamma Irradiation Facility (GIF++) exposed to an intense gamma irradiation with the aim of evaluating the detector behaviour under high irradiation and carrying out a long-term age- ing study. The chambers under study have an active area of 10 x 10 cm 2 , a strip pitch of 400 m m , an ampli- fication gap of 128 m m , and a drift gap of 5 mm. The results on the detector performance as a function of the photon flux up to 44 MHz/cm 2 will be shown as well as the ageing properties as function of the integrated charge and the current intensity and its stability with time. In addition, the results of the efficiency measurements before, during, and after the irradiation will also be presented as a function of the amplification voltage at which the chambers are operated.

  19. Prevalence, antimicrobial resistance, and molecular characterization of Campylobacter spp. in bulk tank milk and milk filters from US dairies.

    Science.gov (United States)

    Del Collo, Laura P; Karns, Jeffrey S; Biswas, Debabrata; Lombard, Jason E; Haley, Bradd J; Kristensen, R Camilla; Kopral, Christine A; Fossler, Charles P; Van Kessel, Jo Ann S

    2017-05-01

    Campylobacter spp. are frequently isolated from dairy cows as commensal organisms. Sporadic Campylobacter infections in humans in the United States are generally attributed to poultry, but outbreaks are also commonly associated with dairy products, particularly unpasteurized or raw milk. Bulk tank milk samples and milk filters from US dairy operations were collected during the National Animal Health Monitoring System Dairy 2014 study and analyzed using real-time PCR and traditional culture techniques for the presence of thermophilic Campylobacter species. The weighted prevalence of operations from which we detected Campylobacter spp. in either bulk tank milk or milk filters was 24.9%. We detected Campylobacter spp. in a higher percentage of operations with 100-499 cows (42.8%) and 500 or more cows (47.5%) than in operations with 30-99 cows (6.5%). Campylobacter spp. were also more frequently detected in operations in the west than the east (45.9 and 22.6%, respectively). We isolated Campylobacter spp. from approximately half of PCR-positive samples, representing 12.5% (weighted prevalence) of operations. The majority (91.8%) of isolates were C. jejuni, but C. lari and C. coli were also isolated. We detected resistance to tetracycline in 68.4% of C. jejuni isolates, and resistance to ciprofloxacin and nalidixic acid in 13.2% of C. jejuni isolates. Based on pulsed-field gel electrophoresis, we found that dairy-associated C. jejuni were genotypically diverse, although clonal strains were isolated from different geographic regions. These results suggest that bulk tank milk can be contaminated with pathogenic Campylobacter spp., and that the consumption of unpasteurized or raw milk presents a potential human health risk. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  20. Improving the bulk laser-damage resistance of KDP by baking and pulsed-laser irradiation

    International Nuclear Information System (INIS)

    Swain, J.E.; Stokowski, S.E.; Milam, D.; Rainer, F.

    1981-01-01

    Isolated bulk damage centers are produced when KDP crystals are irradiated by 1-ns 1064-nm pulses. We have tested about 100 samples and find the median threshold to be 7 J/cm 2 when the samples are irradiated only once at each test volume (1-on-1 tests). The median threshold increased to 11 J/cm 2 when the test volumes were first subjected to subthreshold laser irradiation (n-on-1 tests). We baked several crystals at temperatures from 110 to 165 0 C and remeasured their thresholds. Baking increased thresholds in some crystals, but did not change thresholds of others. The median threshold of baked crystals ranged from 8 to 10 J/cm 2 depending on the baking temperature. In crystals that had been baked, subthreshold irradiation produced a large change in the bulk damage threshold, and reduced the volume density of damage centers relative to the density observed in unbaked crystals. The data are summarized in the table

  1. Occurrence and antimicrobial resistance of Staphylococcus aureus in bulk tank milk and milk filters

    Directory of Open Access Journals (Sweden)

    Kateřina Bogdanovičová

    2014-02-01

    Full Text Available This work is focused on the monitoring of Staphylococcus aureus prevalence in raw milk and milk filters, its antibiotic resistance and detection of methicillin resistant Staphylococcus aureus (MRSA. Samples of raw cow´s milk and milk filters were collected in the period from 2012 till 2014, from 50 dairy farms in the Czech Republic. The total of 261 samples (164 samples of raw milk and 97 milk filters were cultivated on Baird-Parker agar. Both the typical and atypical colonies were examined by plasmacoagulase test and PCR method was used for detection of species specific fragment SA442 and mecA gene. Standard disk diffusion method was used to determinate resistance to antimicrobial agents. The bacterium Staphylococcus aureus was detected on 25 farms (50%. The antimicrobial resistance showed differences between the farms. Total of 58 samples were positive for Staphylococcus aureus, of which were 37 (14.2% isolated from raw milk samples and 21 (8.1% from milk filters. From these samples we isolated 62 Staphylococcus aureus strains, 41 isolates bacteria S. aureus from raw milk (66.1% and 21 isolates S. aureus from milk filters (33.9%. The presence of antibiotic resistance in Staphylococcus aureus isolates was low, most of them were resistant to amoxicilin. According to the results obtained by the PCR method for the methicillin - resistant S. aureus (MRSA, the mecA gene was present in 6 strains (9.7%, 4 isolates obtained from milk samples (6.5% and 2 isolates from milk filters (3.2%.  These isolates can be considered as a possible source of resistance genes, which can be spread through the food chain. Nowadays, a globally unfavourable increasing trend of prevalence of methicillin resistant staphylococci strains especially Staphylococcus aureus is being observed worldwide. The improper hygiene and poor farm management practices contributed to the presence of S. aureus in the milk. This may have contributed to the high level of S. aureus isolated

  2. Elevated temperature annealing behaviors of bulk resistivity and space charge density (Neff) of neutron irradiated silicon detectors and materials

    International Nuclear Information System (INIS)

    Li, Z.

    1996-01-01

    The bulk resistivity of neutron irradiated detector grade silicon material has been measured under the condition of no or low electrical filed (electrical neutral bulk or ENB condition) after elevated temperature (T=110 C) anneals (ETA). The ENB resistivity (ρ) for as-irradiated silicon material increases with neutron fluence at low fluences (Φ n 13 n/cm 2 ) and starts to saturate at a value between 300-400 kΩ cm at high fluences (Φ n >10 13 n/cm 2 ). The saturation of the ENB resistivity near the intrinsic value can be explained by the near perfect compensation of all neutron induced deep donors and acceptors in the ENB. After ETA, it has been observed that ρ increases with annealing time for silicon materials irradiated below the saturation and decreases with annealing time for those irradiated after saturation. For those irradiated near the saturation point, ρ increases with annealing time initially and decreases thereafter. This ETA behavior of ρ may be explained by the increase of net acceptor-like deep levels in silicon during the anneal, qualitatively consistent with the observed reverse annealing effect of the space charge density (N eff ) in silicon detectors which is an increase of negative space charge density (acceptors) after long term room temperature (RTA) anneal and/or ETA. However, the amount of the increase of net hole concentration (p) of about 5 x 10 11 cm -3 , corresponding to 20 hours of ETA at 110 C for a fluence of 1.5 x 10 14 n/cm 2 , is still much less than the corresponding increase of N eff of about 1.5 x 10 13 cm -3 . This suggests that while the ETA restores some of the free carrier concentration (namely holes), there is still a large degree of compensation. The space charge density is still dominated by the deep levels and N eff ≠p. (orig.)

  3. Doppel and PrPC co-immunoprecipitate in detergent-resistant membrane domains of epithelial FRT cells

    Science.gov (United States)

    Caputo, Anna; Sarnataro, Daniela; Campana, Vincenza; Costanzo, Maddalena; Negro, Alessandro; Sorgato, M. Catia; Zurzolo, Chiara

    2009-01-01

    Dpl (doppel) is a paralogue of the PrPC (cellular prion protein), whose misfolded conformer (the scrapie prion protein, PrPSc) is responsible for the onset of TSEs (transmissible spongiform encephalopathies) or prion diseases. It has been shown that the ectopic expression of Dpl in the brains of some lines of PrP-knockout mice provokes cerebellar ataxia, which can be rescued by the reintroduction of the PrP gene, suggesting a functional interaction between the two proteins. It is, however, still unclear where, and under which conditions, this event may occur. In the present study we addressed this issue by analysing the intracellular localization and the interaction between Dpl and PrPC in FRT (Fischer rat thyroid) cells stably expressing the two proteins separately or together. We show that both proteins localize prevalently on the basolateral surface of FRT cells, in both singly and doubly transfected clones. Interestingly we found that they associate with DRMs (detergent-resistant membranes) or lipid rafts, from where they can be co-immunoprecipitated in a cholesterol-dependent fashion. Although the interaction between Dpl and PrPC has been suggested before, our results provide the first clear evidence that this interaction occurs in rafts and is dependent on the integrity of these membrane microdomains. Furthermore, both Dpl and PrPC could be immunoprecipitated with flotillin-2, a raft protein involved in endocytosis and cell signalling events, suggesting that they share the same lipid environment. PMID:19888917

  4. PrPSc accumulation in fetal cotyledons of scrapie-resistant lambs is influenced by fetus location in the uterus.

    Science.gov (United States)

    Alverson, Janet; O'Rourke, Katherine I; Baszler, Timothy V

    2006-04-01

    Placentae from scrapie-infected ewes have been shown to accumulate PrPSc when the genotype of the fetus is of a susceptible genotype (VRQ/VRQ, ARQ/VRQ or ARQ/ARQ). Cotyledons from fetuses of genotypes ARR/ARR, ARQ/ARR and ARQ/VRR have previously been shown to be resistant to PrPSc accumulation. By using ewes from a naturally infected scrapie flock, cotyledons from fetuses of multiple births of different genotypes were examined. PrPSc was detected in fetal cotyledons of genotype ARQ/ARQ, but not in cotyledons from their dizygotic twin of genotype ARQ/ARR. This confirms earlier reports of single fetuses of these genotypes, but is the first description of such a finding in twin fetuses, one of each genotype. It is also demonstrated that cotyledons from sibling fetuses of genotypes ARQ/VRQ and ARQ/ARQ have different patterns of PrPSc accumulation depending on whether the dam is of genotype ARQ/ARQ or ARQ/VRQ. Lastly, it is shown that cotyledons from fetuses with resistant genotypes are weakly positive for PrPSc when they have shared the same pregnant uterine horn with a fetus of a susceptible genotype with cotyledons positive for the detection of PrPSc. Additionally, a PCR product for the Sry gene, a product specific to males, was found in cotyledons from female fetuses that had shared a uterine horn with a male fetus. This indicates that some sharing of fetal blood occurs between placentomes and fetuses residing in the same uterine horn, which can result in PrPSc accumulation in cotyledons with resistant genotypes.

  5. Bulk lifetime characterization of corona charged silicon wafers with high resistivity by means of microwave detected photoconductivity

    Science.gov (United States)

    Engst, C. R.; Rommel, M.; Bscheid, C.; Eisele, I.; Kutter, C.

    2017-12-01

    Minority carrier lifetime (lifetime) measurements are performed on corona-charged silicon wafers by means of Microwave Detected Photoconductivity (MDP). The corona charge is deposited on the front and back sides of oxidized wafers in order to adjust accumulation conditions. Once accumulation is established, interface recombination is suppressed and bulk lifetimes are obtained. Neither contacts nor non-CMOS compatible preparation techniques are required in order to achieve accumulation conditions, which makes the method ideally suited for inline characterization. The novel approach, termed ChargedMDP (CMDP), is used to investigate neutron transmutation doped (NTD) float zone silicon with resistivities ranging from 6.0 to 8.2 kΩ cm. The bulk properties of 150 mm NTD wafers are analyzed in detail by performing measurements of the carrier lifetime and the steady-state photoconductivity at various injection levels. The results are compared with MDP measurements of uncharged wafers as well as to the established charged microwave detected Photoconductance Decay (charge-PCD) method. Besides analyzing whole wafers, CMDP measurements are performed on oxide test-structures on a patterned wafer. Finally, the oxide properties are characterized by means of charge-PCD as well as capacitance-voltage measurements. With CMDP, average bulk lifetimes up to 33.1 ms are measured, whereby significant variations are observed among wafers, which are produced out of the same ingot but oxidized in different furnaces. The observed lifetime variations are assumed to be caused by contaminations, which are introduced during the oxidation process. The results obtained by CMDP were neither accessible by means of conventional MDP measurements of uncharged wafers nor with the established charge-PCD method.

  6. QTL mapping for downy mildew resistance in cucumber via bulked segregant analysis using next-generation sequencing and conventional methods.

    Science.gov (United States)

    Win, Khin Thanda; Vegas, Juan; Zhang, Chunying; Song, Kihwan; Lee, Sanghyeob

    2017-01-01

    QTL mapping using NGS-assisted BSA was successfully applied to an F 2 population for downy mildew resistance in cucumber. QTLs detected by NGS-assisted BSA were confirmed by conventional QTL analysis. Downy mildew (DM), caused by Pseudoperonospora cubensis, is one of the most destructive foliar diseases in cucumber. QTL mapping is a fundamental approach for understanding the genetic inheritance of DM resistance in cucumber. Recently, many studies have reported that a combination of bulked segregant analysis (BSA) and next-generation sequencing (NGS) can be a rapid and cost-effective way of mapping QTLs. In this study, we applied NGS-assisted BSA to QTL mapping of DM resistance in cucumber and confirmed the results by conventional QTL analysis. By sequencing two DNA pools each consisting of ten individuals showing high resistance and susceptibility to DM from a F 2 population, we identified single nucleotide polymorphisms (SNPs) between the two pools. We employed a statistical method for QTL mapping based on these SNPs. Five QTLs, dm2.2, dm4.1, dm5.1, dm5.2, and dm6.1, were detected and dm2.2 showed the largest effect on DM resistance. Conventional QTL analysis using the F 2 confirmed dm2.2 (R 2  = 10.8-24 %) and dm5.2 (R 2  = 14-27.2 %) as major QTLs and dm4.1 (R 2  = 8 %) as two minor QTLs, but could not detect dm5.1 and dm6.1. A new QTL on chromosome 2, dm2.1 (R 2  = 28.2 %) was detected by the conventional QTL method using an F 3 population. This study demonstrated the effectiveness of NGS-assisted BSA for mapping QTLs conferring DM resistance in cucumber and revealed the unique genetic inheritance of DM resistance in this population through two distinct major QTLs on chromosome 2 that mainly harbor DM resistance.

  7. Characterization of Contact and Bulk Thermal Resistance of Laminations for Electric Machines

    Energy Technology Data Exchange (ETDEWEB)

    Cousineau, J. Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bennion, Kevin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); DeVoto, Doug [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mihalic, Mark [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Narumanchi, Sreekant [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-06-30

    The ability to remove heat from an electric machine depends on the passive stack thermal resistances within the machine and the convective cooling performance of the selected cooling technology. This report focuses on the passive thermal design, specifically properties of the stator and rotor lamination stacks. Orthotropic thermal conductivity, specific heat, and density are reported. Four materials commonly used in electric machines were tested, including M19 (29 and 26 gauge), HF10, and Arnon 7 materials.

  8. Approximating the Added Resistance Coefficient for a Bulk Carrier Sailing in Head Sea Conditions Based on its Geometrical Parameters and Speed

    Directory of Open Access Journals (Sweden)

    Cepowski Tomasz

    2016-12-01

    Full Text Available The article presents the mathematical function to calculate the added wave resistance transfer function for bulk carriers. Based on this function, the statistical mean added wave resistance generated by an irregular head wave with arbitrary statistical parameters can be forecasted. The input parameters are: waterplane area, waterplane coefficient, ship speed, and frequency of the regular wave. The model has been developed based on the theory of artificial neural networks. The presented function can be used in design analyses, and for planning shipping routes in situations when basic geometrical parameters of the hull are only available and not the full technical documentation. The article presents sample cases of use of this function to calculate the added wave resistance transfer function and the statistical mean added wave resistance. Another presented application refers to waterplane coefficient optimisation taking into account the added wave resistance at the stage of preliminary bulk carrier design.

  9. Methamphetamine increases Prion Protein and induces dopamine-dependent expression of protease resistant PrPsc.

    Science.gov (United States)

    Ferrucci, M; Ryskalin, L; Biagioni, F; Gambardella, S; Busceti, C L; Falleni, A; Lazzeri, G; Fornai, F

    2017-07-01

    The cellular prion protein (PrPc) is physiologically expressed within selective brain areas of mammals. Alterations in the secondary structure of this protein lead to scrapie-like prion protein (PrPsc), which precipitates in the cell. PrPsc has been detected in infectious, inherited or sporadic neurodegenerative disorders. Prion protein metabolism is dependent on autophagy and ubiquitin proteasome. Despite not being fully elucidated, the physiological role of prion protein relates to chaperones which rescue cells under stressful conditions.Methamphetamine (METH) is a widely abused drug which produces oxidative stress in various brain areas causing mitochondrial alterations and protein misfolding. These effects produce a compensatory increase of chaperones while clogging cell clearing pathways. In the present study, we explored whether METH administration modifies the amount of PrPc. Since high levels of PrPc when the clearing systems are clogged may lead to its misfolding into PrPsc, we further tested whether METH exposure triggers the appearance of PrPsc. We analysed the effects of METH and dopamine administration in PC12 and striatal cells by using SDS-PAGE Coomassie blue, immune- histochemistry and immune-gold electron microscopy. To analyze whether METH administration produces PrPsc aggregates we used antibodies directed against PrP following exposure to proteinase K or sarkosyl which digest folded PrPc but misfolded PrPsc. We fond that METH triggers PrPsc aggregates in DA-containing cells while METH is not effective in primary striatal neurons which do not produce DA. In the latter cells exogenous DA is needed to trigger PrPsc accumulation similarly to what happens in DA containing cells under the effects of METH. The present findings, while fostering novel molecular mechanisms involving prion proteins, indicate that, cell pathology similar to prion disorders can be mimicked via a DA-dependent mechanism by a drug of abuse.

  10. On a solution to the problem of the poor cyclic fatigue resistance of bulk metallic glasses

    Energy Technology Data Exchange (ETDEWEB)

    Launey, Maximilien E.; Hofmann, Douglas C.; Johnson, William L.; Ritchie, Robert O.

    2009-01-09

    The recent development of metallic glass-matrix composites represents a particular milestone in engineering materials for structural applications owing to their remarkable combinations of strength and toughness. However, metallic glasses are highly susceptible to cyclic fatigue damage and previous attempts to solve this problem have been largely disappointing. Here we propose and demonstrate a microstructural design strategy to overcome this limitation by matching the microstructural length scales (of the second phase) to mechanical crack-length scales. Specifically, semi-solid processing is used to optimize the volume fraction, morphology, and size of second phase dendrites to confine any initial deformation (shear banding) to the glassy regions separating dendrite arms having length scales of {approx} 2 {micro}m, i.e., to less than the critical crack size for failure. Confinement of the damage to such interdendritic regions results in enhancement of fatigue lifetimes and increases the fatigue limit by an order of magnitude making these 'designed' composites as resistant to fatigue damage as high-strength steels and aluminum alloys. These design strategies can be universally applied to any other metallic glass systems.

  11. A comparative study of magnetic field induced meta-magnetic transition in nanocrystalline and bulk Pr0.65(Ca0.7Sr0.3)0.35MnO3 compound

    Science.gov (United States)

    Saha, Suvayan; Das, Kalipada; Bandyopadhyay, Sudipta; Das, I.

    2017-06-01

    In our present study we highlight the observations of external magnetic field induced sharp meta-magnetic transition in polycrystalline bulk as well as nanocrystalline form of Pr0.65(Ca0.7Sr0.7)0.35MnO3 compound. Interestingly, such behavior persists in the nanoparticles regardless of the disorder broadened transition. However, higher magnetic field is required for nanoparticles having average particle size ∼40 nm for such meta-magnetic transition, which differs from the general trends of the pure charge ordered nano materials. The interfacial strain between the different magnetic domains plays the important role in magnetic isothermal properties of nanoparticles, when the samples are cooled down in different cooling field. Additionally, both the bulk and nanoparticle compounds exhibit spontaneous phase separation and significantly large magnetoresistance at the low temperature region due to the melting of charge ordered fraction.

  12. Resistive switching properties and low resistance state relaxation in Al/Pr0.7Ca0.3MnO3/Pt junctions

    International Nuclear Information System (INIS)

    Li Songlin; Liao, Z L; Li, J; Gang, J L; Zheng, D N

    2009-01-01

    Metal/insulator/metal structures composed of active Al top electrodes (TEs) and oxygen-deficient Pr 0.7 Ca 0.3 MnO 3 (PCMO) insulator layers are prepared on platinized silicon substrates. The junction resistance exhibits an obvious negative differential resistance region in the first bias sweep and an irreversible increase from 2 to 100 MΩ in repeated ±4 V sweeps. The pulse duration needed to fully switch the junctions is found to be on the order of milliseconds. When 100-500 μs negative pulses are used, the junctions show an incomplete switch to the low resistance state (LRS) which exhibits fluctuating resistances. The fluctuation in the LRS is suppressed and the high-to-low resistance ratio increases gradually when the negative pulse duration is increased from 100 to 500 μs. For relaxed junctions, pulse switching experiments reveal that the LRS undergoes a dynamically stable process at the beginning and then reaches a lower and metastable resistance value. Resistance retention tests also indicate that the high resistance state is very stable, while the metastable LRS gradually relaxes to higher resistance values. The experimental results are discussed with the formation and dissociation of an interfacial AlO x layer at the interface between Al TEs and PCMO layers.

  13. Prevalence, characterization, and antimicrobial resistance of Yersinia species and Yersinia enterocolitica isolated from raw milk in farm bulk tanks.

    Science.gov (United States)

    Jamali, Hossein; Paydar, Mohammadjavad; Radmehr, Behrad; Ismail, Salmah

    2015-02-01

    The aims of this study were to investigate the prevalence and to characterize and determine the antibiotic resistance of Yersinia spp. isolates from raw milk. From September 2008 to August 2010, 446 raw milk samples were obtained from farm bulk milk tanks in Varamin, Iran. Yersinia spp. were detected in 29 (6.5%) samples, out of which 23 (79.3%), 5 (17.2%), and 1 (3.4%) were isolated from cow, sheep, and goat raw milk, respectively. The most common species isolated was Yersinia enterocolitica (65.5%), followed by Yersinia frederiksenii (31%), and Yersinia kristensenii (3.4%). Of the 19 Y. enterocolitica isolates, 14 (73.7%) were grouped into bioserotype 1A/O:9, 4 (21.1%) belonged to bioserotype 1B:O8, 1 (5.3%) belonged to bioserotype 4/O:3, and 1 isolate (biotype 1A) was not typable. All the isolates of biotypes 1B and 4harbored both the ystA and ail genes. However, all the isolates of biotype 1A were only positive for the ystB gene. The tested Yersinia spp. showed the highest percentages of resistance to tetracycline (48.3%), followed by ciprofloxacin and cephalothin (each 17.2%), ampicillin (13.8%), streptomycin (6.9%), and amoxicillin and nalidixic acid (each 3.4%). All of the tested isolates demonstrated significant sensitivity to gentamicin and chloramphenicol. Recovery of potentially pathogenic Y. enterocolitica from raw milk indicates high risks of yersiniosis associated with consumption of raw milk. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  14. Prevalence, antimicrobial susceptibility and molecular typing of Methicillin-Resistant Staphylococcus aureus (MRSA) in bulk tank milk from southern Italy.

    Science.gov (United States)

    Parisi, A; Caruso, M; Normanno, G; Latorre, L; Sottili, R; Miccolupo, A; Fraccalvieri, R; Santagada, G

    2016-09-01

    This paper assesses the prevalence of MRSA in bulk tank milk (BTM) samples from southern Italy, and the relationship between the Coagulase Positive Staphylococci count (CPS) and MRSA prevalence. Of 486 BTM samples tested, 12 samples (2.5%) resulted positive for the presence of MRSA. Great genetic diversity was found among the isolates: ST1/t127 and t174/IVa, ST5/t688/V, ST8/t unknown/IVa/V, ST45/t015/IVa, ST71/t524/V, ST88/t786/Iva, ST398/t011 and t899/IVa/V and ST2781/t1730/V. All isolates were pvl-negative and icaA positive. The majority of strains (58%) carried the ses (sec, seh, seg, seo, sem and sen) genes. All tested strains resulted susceptible to amikacin, cephalotin, cloramphenicol, gentamycin, trimethoprim - sulfamethoxazole, tobramycin and vancomycin, and variably resistant to ampicillin, oxacillin and tetracycline. No statistical association between the CPS count and MRSA detection was found in the MRSA-positive samples. Although some of the spa-types and STs detected in our survey are known to cause human infections, raw milk from Italian herds in the considered area is not a common source of MRSA. Nonetheless, it is necessary to assess the risk of foodborne infection and the risk related to the handling of milk. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based bulk metallic glasses by microalloying

    Directory of Open Access Journals (Sweden)

    Peng Hao

    2011-02-01

    Full Text Available The influences of the addition of Ag on the glass forming ability (GFA and corrosion behavior were investigated in the Mg-Ni-based alloy system by X-ray diffraction (XRD and electrochemical polarization in 0.1 mol/L NaOH solution. Results shows that the GFA of the Mg-Ni-based BMGs can be improved dramatically by the addition of an appropriate amount of Ag; and the addition element Ag can improve the corrosion resistance of Mg-Ni-based bulk metallic glass. The large difference in atomic size and large negative mixing enthalpy in alloy system can contribute to the high GFA. The addition element Ag improves the forming speed and the stability of the passive film, which is helpful to decrease the passivation current density and to improve the corrosion resistance of Mg-Ni-based bulk metallic glass.

  16. The novel gene VpPR4-1 from Vitis pseudoreticulata increases powdery mildew resistance in transgenic Vitis vinifera L.

    Directory of Open Access Journals (Sweden)

    Lingmin eDai

    2016-05-01

    Full Text Available Pathogenesis-related proteins (PRs can lead to increased resistance of the whole plant to pathogen attack. Here, we isolate and characterize a PR-4 protein from a wild Chinese grape Vitis pseudoreticulata which shows greatly elevated transcription following powdery mildew infection. Its expression profiles under a number of abiotic stresses were also investigated. The PR-4 gene was overexpressed in regenerated V. vinifera cv. Red Globe via Agrobacterium tumefaciens-mediated transformation and verified by the Western blot. The transgenic grapevines exhibited higher expression levels of PR-4 protein content than wild-type vines and also repressed the growth of powdery mildew. The PR gene responds differently to different stresses in the PR-4 transformants. This study demonstrates that PR-4 protein in grapes plays a vital role in defense against powdery mildew invasion.

  17. Tagging of Brown Planthopper Resistance Genes in F2s of IR50 × Ptb33 of Rice by Using Bulked Segregant Analysis

    Directory of Open Access Journals (Sweden)

    Venkateswarlu YADAVALLI

    2012-03-01

    Full Text Available Brown planthopper (Nilaparvata lugens Stål is one of the most damaging pests causing hopper burn in rice, and thereby reducing the productivity and also the quality of the product. The effective management strategy to control this pest is the identification and transfer of desirable genes to local rice cultivars. The most important approach for developing resistant cultivars is the identification of markers, which can help in marker-assisted selection of more durable resistant genotype. The susceptible parent IR50 and the resistant parent Ptb33, and their F2 populations were used in bulked segregant analysis for identification of resistant genes with random amplified polymorphic DNA marker (RAPD primers. The primers OPC7 and OPAG14 showed both dominant and susceptible specific banding pattern so called co-dominant markers. Moreover, OPC7697 and OPAG14680 showed resistant specific bands and thus being in coupling phase, whereas OPC7846 and OPAG14650 showed susceptible specific genotypic bands in bulked segregant analysis. Therefore, the coupling phase markers, OPC7697 and OPAG14680, are considered to be more useful in marker-assisted selection of rice genotypes in crop improvement.

  18. The practical limits for enhancing magnetic property combinations for bulk nanocrystalline NdFeB alloys through Pr, Co and Dy substitutions

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Z.W. [Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (Singapore)]. E-mail: phylz@nus.edu.sg; Davies, H.A. [Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (Singapore)

    2007-06-15

    Pr, Co and Dy additions have been employed to improve the combinations of magnetic properties for nanocrystalline Nd {sub x} Fe{sub 94-} {sub x} B{sub 6} melt spun alloys. The dependences of the magnetic properties on the solute element concentrations have been extensively investigated and the relationships between the measured remanence, maximum energy product (BH){sub max} and intrinsic coercivity for several compositional series are discussed. The composition ranges for these elemental substitutions which can be used to achieve the highest values of (BH){sub max} are identified. It is found that, when we employ individual or combined substitutions of Pr and Dy for Nd and Co for Fe in NdFeB alloys with various RE:Fe ratios, the practical limit of (BH){sub max} lies in the range {approx}160-180 kJ/m{sup 3}, combined with a coercivity in the range {approx}400-800 kA/m.

  19. Bases scientifiques de la préparation des catalyseurs constitués d'oxydes mixtes massiques Scientific Bases for the Preparation of Bulk Mixed Oxide Catalysts

    Directory of Open Access Journals (Sweden)

    Courty P.

    2006-11-01

    Full Text Available Cette étude de la préparation des oxydes mixtes massiques et de leur mise en régime dans le milieu réactionnel concerne les différentes méthodes de synthèse utilisées et précise quelles sont les lois générales qui régissent chaque étape unitaire de la préparation (séparation d'un précurseur hydraté, lavage, transformations hydrothermiques, séchage, activation thermique, addition d'autres éléments, mise en forme. De nombreux exemples révèlent la diversité des transformations observées. L'oxyde mixte activé thermiquement est lui-même le précurseur d'autres oxydes mixtes, de métaux ou d'alliages divisés, de sulfures, de nitrures ou de carbures simples ou mixtes. Ces composés se forment lors de la stabilisation du catalyseur dans le milieu réactionnel, au cours d'une transformation complexe et spécifique du type de réaction envisagé. Divers exemples (oxydation ménagée, déshydrogénation, synthèse d'alcools sont donnés. Une caractérisation systématique et rigoureuse de chaque intermédiaire réactionnel est finalement nécessaire pour préciser les lois plus ou moins empiriques qui régissent l'évolution des propriétés superficielles et massiques de texture, de structure et de composition, au cours des transformations successives du solide ; le procédé de préparation et de mise en régime optimisé qui en résulte doit enfin satisfaire aux impératifs techniques et économiques du procédé catalytique correspondant. This study of the preparation of bulk mixed oxides and of their stabilization into the reaction medium deals with the different synthesis methods used and gives some general laws governing each specific type of preparation (separation of a hydrated precursor, washing, hydrothermal transformations, drying, thermal activation, addition of other elements, shaping. Numerous examples reveal the diversity of the transformations observed. The thermally activated mixed oxide becomes itself the

  20. The region approximately between amino acids 81 and 137 of proteinase K-resistant PrPSc is critical for the infectivity of the Chandler prion strain.

    Science.gov (United States)

    Shindoh, Ryo; Kim, Chan-Lan; Song, Chang-Hyun; Hasebe, Rie; Horiuchi, Motohiro

    2009-04-01

    Although the major component of the prion is believed to be the oligomer of PrP(Sc), little information is available concerning regions on the PrP(Sc) molecule that affect prion infectivity. During the analysis of PrP(Sc) molecules from various prion strains, we found that PrP(Sc) of the Chandler strain showed a unique property in the conformational-stability assay, and this property appeared to be useful for studying the relationship between regions of the PrP(Sc) molecule and prion infectivity. Thus, we analyzed PrP(Sc) of the Chandler strain in detail and analyzed the infectivities of the N-terminally denatured and truncated forms of proteinase K-resistant PrP. The N-terminal region of PrP(Sc) of the Chandler strain showed region-dependent resistance to guanidine hydrochloride (GdnHCl) treatment. The region approximately between amino acids (aa) 81 and 137 began to be denatured by treatment with 1.5 M GdnHCl. Within this stretch, the region comprising approximately aa 81 to 90 was denatured almost completely by 2 M GdnHCl. Furthermore, the region approximately between aa 90 and 137 was denatured completely by 3 M GdnHCl. However, the C-terminal region thereafter was extremely resistant to the GdnHCl treatment. This property was not observed in PrP(Sc) molecules of other prion strains. Denaturation of the region between aa 81 and 137 by 3 M GdnHCl significantly prolonged the incubation periods in mice compared to that for the untreated control. More strikingly, the denaturation and removal of this region nearly abolished the infectivity. This finding suggests that the conformation of the region between aa 81 and 137 of the Chandler strain PrP(Sc) molecule is directly associated with prion infectivity.

  1. A new method for the characterization of strain-specific conformational stability of protease-sensitive and protease-resistant PrPSc.

    Directory of Open Access Journals (Sweden)

    Laura Pirisinu

    Full Text Available Although proteinacious in nature, prions exist as strains with specific self-perpetuating biological properties. Prion strains are thought to be associated with different conformers of PrP(Sc, a disease-associated isoform of the host-encoded cellular protein (PrP(C. Molecular strain typing approaches have been developed which rely on the characterization of protease-resistant PrP(Sc. However, PrP(Sc is composed not only of protease-resistant but also of protease-sensitive isoforms. The aim of this work was to develop a protocol for the molecular characterization of both, protease-resistant and protease-sensitive PrP(Sc aggregates. We first set up experimental conditions which allowed the most advantageous separation of PrP(C and PrP(Sc by means of differential centrifugation. The conformational solubility and stability assay (CSSA was then developed by measuring PrP(Sc solubility as a function of increased exposure to GdnHCl. Brain homogenates from voles infected with human and sheep prion isolates were analysed by CSSA and showed strain-specific conformational stabilities, with mean [GdnHCl](1/2 values ranging from 1.6 M for MM2 sCJD to 2.1 for scrapie and to 2.8 M for MM1/MV1 sCJD and E200K gCJD. Interestingly, the rank order of [GdnHCl](1/2 values observed in the human and sheep isolates used as inocula closely matched those found following transmission in voles, being MM1 sCJD the most resistant (3.3 M, followed by sheep scrapie (2.2 M and by MM2 sCJD (1.6 M. In order to test the ability of CSSA to characterise protease-sensitive PrP(Sc, we analysed sheep isolates of Nor98 and compared them to classical scrapie isolates. In Nor98, insoluble PrP(Sc aggregates were mainly protease-sensitive and showed a conformational stability much lower than in classical scrapie. Our results show that CSSA is able to reveal strain-specified PrP(Sc conformational stabilities of protease-resistant and protease-sensitive PrP(Sc and that it is a valuable tool

  2. A new method for the characterization of strain-specific conformational stability of protease-sensitive and protease-resistant PrPSc.

    Science.gov (United States)

    Pirisinu, Laura; Di Bari, Michele; Marcon, Stefano; Vaccari, Gabriele; D'Agostino, Claudia; Fazzi, Paola; Esposito, Elena; Galeno, Roberta; Langeveld, Jan; Agrimi, Umberto; Nonno, Romolo

    2010-09-14

    Although proteinacious in nature, prions exist as strains with specific self-perpetuating biological properties. Prion strains are thought to be associated with different conformers of PrP(Sc), a disease-associated isoform of the host-encoded cellular protein (PrP(C)). Molecular strain typing approaches have been developed which rely on the characterization of protease-resistant PrP(Sc). However, PrP(Sc) is composed not only of protease-resistant but also of protease-sensitive isoforms. The aim of this work was to develop a protocol for the molecular characterization of both, protease-resistant and protease-sensitive PrP(Sc) aggregates. We first set up experimental conditions which allowed the most advantageous separation of PrP(C) and PrP(Sc) by means of differential centrifugation. The conformational solubility and stability assay (CSSA) was then developed by measuring PrP(Sc) solubility as a function of increased exposure to GdnHCl. Brain homogenates from voles infected with human and sheep prion isolates were analysed by CSSA and showed strain-specific conformational stabilities, with mean [GdnHCl](1/2) values ranging from 1.6 M for MM2 sCJD to 2.1 for scrapie and to 2.8 M for MM1/MV1 sCJD and E200K gCJD. Interestingly, the rank order of [GdnHCl](1/2) values observed in the human and sheep isolates used as inocula closely matched those found following transmission in voles, being MM1 sCJD the most resistant (3.3 M), followed by sheep scrapie (2.2 M) and by MM2 sCJD (1.6 M). In order to test the ability of CSSA to characterise protease-sensitive PrP(Sc), we analysed sheep isolates of Nor98 and compared them to classical scrapie isolates. In Nor98, insoluble PrP(Sc) aggregates were mainly protease-sensitive and showed a conformational stability much lower than in classical scrapie. Our results show that CSSA is able to reveal strain-specified PrP(Sc) conformational stabilities of protease-resistant and protease-sensitive PrP(Sc) and that it is a valuable tool for

  3. Short communication: Prevalence of methicillin resistance in coagulase-negative staphylococci and Staphylococcus aureus isolated from bulk milk on organic and conventional dairy farms in the United States.

    Science.gov (United States)

    Cicconi-Hogan, K M; Belomestnykh, N; Gamroth, M; Ruegg, P L; Tikofsky, L; Schukken, Y H

    2014-05-01

    The objective of this study was to evaluate the presence of methicillin-resistant Staphylococcus aureus and coagulase-negative Staphylococcus spp. in bulk tank milk samples from 288 organic and conventional dairy farms located in New York, Wisconsin, and Oregon from March 2009 to May 2011. Due to recent publications reporting the presence mecC (a mecA homolog not detected by traditional mecA-based PCR methods), a combination of genotypic and phenotypic approaches was used to enhance the recovery of methicillin-resistant organisms from bulk tank milk. In total, 13 isolates were identified as methicillin resistant: Staph. aureus (n=1), Staphylococcus sciuri (n=5), Staphylococcus chromogenes (n=2), Staphylococcus saprophyticus (n=3), Staphylococcus agnetis (n=1), and Macrococcus caseolyticus (n=1). The single methicillin-resistant Staph. aureus isolate was identified from an organic farm in New York, for an observed 0.3% prevalence at the farm level. The methicillin-resistant coagulase-negative staphylococci prevalence was 2% in the organic population and 5% in the conventional population. We did not identify mecC in any of the isolates from our population. Of interest was the relatively high number of methicillin-resistant Staph. sciuri recovered, as the number of isolates from our study was considerably higher than those recovered from other recent studies that also assessed milk samples. Our research suggests that the presence of a potential methicillin-resistant Staphylococcus reservoir in milk, and likely the dairy farm population in the United States, is independent of the organic or conventional production system. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  4. Non-destructive reversible resistive switching in Cr doped Mott insulator Ca2RuO4: Interface vs bulk effects

    Science.gov (United States)

    Shen, Shida; Williamson, Morgan; Cao, Gang; Zhou, Jianshi; Goodenough, John; Tsoi, Maxim

    2017-12-01

    A non-destructive reversible resistive switching is demonstrated in single crystals of Cr-doped Mott insulator Ca2RuO4. An applied electrical bias was shown to reduce the DC resistance of the crystal by as much as 75%. The original resistance of the sample could be restored by applying an electrical bias of opposite polarity. We have studied this resistive switching as a function of the bias strength, applied magnetic field, and temperature. A combination of 2-, 3-, and 4-probe measurements provide a means to distinguish between bulk and interfacial contributions to the switching and suggests that the switching is mostly an interfacial effect. The switching was tentatively attributed to electric-field driven lattice distortions which accompany the impurity-induced Mott transition. This field effect was confirmed by temperature-dependent resistivity measurements which show that the activation energy of this material can be tuned by an applied DC electrical bias. The observed resistance switching can potentially be used for building non-volatile memory devices like resistive random access memory.

  5. Non-destructive reversible resistive switching in Cr doped Mott insulator Ca2RuO4: Interface vs bulk effects

    KAUST Repository

    Shen, Shida

    2017-12-29

    A non-destructive reversible resistive switching is demonstrated in single crystals of Cr-doped Mott insulator Ca2RuO4. An applied electrical bias was shown to reduce the DC resistance of the crystal by as much as 75%. The original resistance of the sample could be restored by applying an electrical bias of opposite polarity. We have studied this resistive switching as a function of the bias strength, applied magnetic field, and temperature. A combination of 2-, 3-, and 4-probe measurements provide a means to distinguish between bulk and interfacial contributions to the switching and suggests that the switching is mostly an interfacial effect. The switching was tentatively attributed to electric-field driven lattice distortions which accompany the impurity-induced Mott transition. This field effect was confirmed by temperature-dependent resistivity measurements which show that the activation energy of this material can be tuned by an applied DC electrical bias. The observed resistance switching can potentially be used for building non-volatile memory devices like resistive random access memory.

  6. Development of a multiple bulked segregant analysis (MBSA) method used to locate a new stem rust resistance gene (Sr54) in the winter wheat cultivar Norin 40.

    Science.gov (United States)

    Ghazvini, Habibollah; Hiebert, Colin W; Thomas, Julian B; Fetch, Thomas

    2013-02-01

    An important aspect of studying putative new genes in wheat is determining their position on the wheat genetic map. The primary difficulty in mapping genes is determining which chromosome carries the gene of interest. Several approaches have been developed to address this problem, each with advantages and disadvantages. Here we describe a new approach called multiple bulked segregant analysis (MBSA). A set of 423 simple sequence repeat (SSR) markers were selected based on profile simplicity, frequency of polymorphism, and distribution across the wheat genome. SSR primers were preloaded in 384-well PCR plates with each primer occupying 16 wells. In practice, 14 wells are reserved for "mini-bulks" that are equivalent to four gametes (e.g. two F(2) individuals) comprised of individuals from a segregated population that have a known homozygous genotype for the gene of interest. The remaining two wells are reserved for the parents of the population. Each well containing a mini-bulk can have one of three allele compositions for each SSR: only the allele from one parent, only the allele from the other parent, or both alleles. Simulation experiments were performed to determine the pattern of mini-bulk allele composition that would indicate putative linkage between the SSR in question and the gene of interest. As a test case, MBSA was employed to locate an unidentified stem rust resistance (Sr) gene in the winter wheat cultivar Norin 40. A doubled haploid (DH) population (n = 267) was produced from hybrids of the cross LMPG-6S/Norin 40. The DH population segregated for a single gene (χ (1:1) (2) = 0.093, p = 0.76) for resistance to Puccinia graminis f.sp. tritici race LCBN. Four resistant DH lines were included in each of the 14 mini-bulks for screening. The Sr gene was successfully located to the long arm of chromosome 2D using MBSA. Further mapping confirmed the chromosome location and revealed that the Sr gene was located in a linkage block that may represent an alien

  7. Pathway Aggregation in the Risk Assessment of Proliferation Resistance and Physical Protection (PR&PP) of Nuclear Energy Systems

    International Nuclear Information System (INIS)

    2015-01-01

    The framework for Proliferation Resistance and Physical Protection (PR & PP) evaluation is to define a set of challenges, to obtain the system responses, and to assess the outcomes. The assessment of outcomes heavily relies on pathways, defined as sequences of events or actions that could potentially be followed by a State or a group of individuals in order to achieve a proliferation objective, with the defined threats as initiating events. There may be large number of segments connecting pathway stages (e.g. acquisition, processing, and fabrication for PR) which can lead to even larger number of pathways or scenarios through possible different combinations of segment connections, each with associated probabilities contributing to the overall risk. Clustering of these scenarios in specified stage attribute intervals is important for their tractable analysis and outcome assessment. A software tool for scenario generation and clustering (OSUPR) is developed that utilizes the PRCALC code developed at the Brookhaven National Laboratory for scenario generation and the K- means, mean shift and adaptive mean shift algorithms as possible clustering schemes. The results of the study using the Example Sodium Fast Breeder as an example system show that clustering facilitates the probabilistic or deterministic analysis of scenarios to identify system vulnerabilities and communication of the major risk contributors to stakeholders. The results of the study also show that the mean shift algorithm has the most potential for assisting the analysis of the scenarios generated by PRCALC.

  8. Pathway Aggregation in the Risk Assessment of Proliferation Resistance and Physical Protection (PR&PP) of Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Aldemir, Tunc [Ohio State Univ., Columbus, OH (United States); Denning, Richard [Ohio State Univ., Columbus, OH (United States); Catalyurek, Umit [Ohio State Univ., Columbus, OH (United States); Yilmaz, Alper [Ohio State Univ., Columbus, OH (United States); Yue, Meng [Brookhaven National Lab. (BNL), Upton, NY (United States); Cheng, Lap-Yan [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-01-23

    The framework for Proliferation Resistance and Physical Protection (PR & PP) evaluation is to define a set of challenges, to obtain the system responses, and to assess the outcomes. The assessment of outcomes heavily relies on pathways, defined as sequences of events or actions that could potentially be followed by a State or a group of individuals in order to achieve a proliferation objective, with the defined threats as initiating events. There may be large number of segments connecting pathway stages (e.g. acquisition, processing, and fabrication for PR) which can lead to even larger number of pathways or scenarios through possible different combinations of segment connections, each with associated probabilities contributing to the overall risk. Clustering of these scenarios in specified stage attribute intervals is important for their tractable analysis and outcome assessment. A software tool for scenario generation and clustering (OSUPR) is developed that utilizes the PRCALC code developed at the Brookhaven National Laboratory for scenario generation and the K- means, mean shift and adaptive mean shift algorithms as possible clustering schemes. The results of the study using the Example Sodium Fast Breeder as an example system show that clustering facilitates the probabilistic or deterministic analysis of scenarios to identify system vulnerabilities and communication of the major risk contributors to stakeholders. The results of the study also show that the mean shift algorithm has the most potential for assisting the analysis of the scenarios generated by PRCALC.

  9. The microstructure and bulk rheology of human cervicovaginal mucus are remarkably resistant to changes in pH.

    Science.gov (United States)

    Wang, Ying-Ying; Lai, Samuel K; Ensign, Laura M; Zhong, Weixi; Cone, Richard; Hanes, Justin

    2013-12-09

    The protective barrier, lubricant, and clearance functions of mucus are intimately coupled to its microstructure and bulk rheology. Mucus gels consist of a network of mucin biopolymers along with lipids, salts, and other proteins and exhibit similar biochemical and physical properties across diverse mucosal surfaces. Nevertheless, mucus is exposed to a broad range of pH values throughout the human body. Protein functions are typically sensitive to small changes in pH, and prior investigations using reconstituted, purified mucin gels suggested mucus undergoes a transition from a low-viscosity liquid at neutral pH to a highly viscoelastic solid at low pH. We sought to determine whether those observations hold for fresh, minimally perturbed human mucus ex vivo by using different-sized muco-inert nanoparticles to probe microstructure and cone-and-plate rheometry to measure bulk rheology. We demonstrate that both the microstructure and bulk rheology of fresh, undiluted, and minimally perturbed cervicovaginal mucus exhibit relatively minor changes from pH 1-2 to 8-9, in marked contrast with the pH sensitivity of purified mucin gels. Our work also suggests additional components in mucus secretions, typically eliminated during mucin purification and reconstitution, may play an important role in maintaining the protective properties of mucus.

  10. Mapping of a Novel Race Specific Resistance Gene to Phytophthora Root Rot of Pepper (Capsicum annuum) Using Bulked Segregant Analysis Combined with Specific Length Amplified Fragment Sequencing Strategy.

    Science.gov (United States)

    Xu, Xiaomei; Chao, Juan; Cheng, Xueli; Wang, Rui; Sun, Baojuan; Wang, Hengming; Luo, Shaobo; Xu, Xiaowan; Wu, Tingquan; Li, Ying

    2016-01-01

    Phytophthora root rot caused by Phytophthora capsici (P. capsici) is a serious limitation to pepper production in Southern China, with high temperature and humidity. Mapping PRR resistance genes can provide linked DNA markers for breeding PRR resistant varieties by molecular marker-assisted selection (MAS). Two BC1 populations and an F2 population derived from a cross between P. capsici-resistant accession, Criollo de Morelos 334 (CM334) and P. capsici-susceptible accession, New Mexico Capsicum Accession 10399 (NMCA10399) were used to investigate the genetic characteristics of PRR resistance. PRR resistance to isolate Byl4 (race 3) was controlled by a single dominant gene, PhR10, that was mapped to an interval of 16.39Mb at the end of the long arm of chromosome 10. Integration of bulked segregant analysis (BSA) and Specific Length Amplified Fragment sequencing (SLAF-seq) provided an efficient genetic mapping strategy. Ten polymorphic Simple Sequence Repeat (SSR) markers were found within this region and used to screen the genotypes of 636 BC1 plants, delimiting PhR10 to a 2.57 Mb interval between markers P52-11-21 (1.5 cM away) and P52-11-41 (1.1 cM). A total of 163 genes were annotated within this region and 31 were predicted to be associated with disease resistance. PhR10 is a novel race specific gene for PRR, and this paper describes linked SSR markers suitable for marker-assisted selection of PRR resistant varieties, also laying a foundation for cloning the resistance gene.

  11. Mapping of a Novel Race Specific Resistance Gene to Phytophthora Root Rot of Pepper (Capsicum annuum Using Bulked Segregant Analysis Combined with Specific Length Amplified Fragment Sequencing Strategy.

    Directory of Open Access Journals (Sweden)

    Xiaomei Xu

    Full Text Available Phytophthora root rot caused by Phytophthora capsici (P. capsici is a serious limitation to pepper production in Southern China, with high temperature and humidity. Mapping PRR resistance genes can provide linked DNA markers for breeding PRR resistant varieties by molecular marker-assisted selection (MAS. Two BC1 populations and an F2 population derived from a cross between P. capsici-resistant accession, Criollo de Morelos 334 (CM334 and P. capsici-susceptible accession, New Mexico Capsicum Accession 10399 (NMCA10399 were used to investigate the genetic characteristics of PRR resistance. PRR resistance to isolate Byl4 (race 3 was controlled by a single dominant gene, PhR10, that was mapped to an interval of 16.39Mb at the end of the long arm of chromosome 10. Integration of bulked segregant analysis (BSA and Specific Length Amplified Fragment sequencing (SLAF-seq provided an efficient genetic mapping strategy. Ten polymorphic Simple Sequence Repeat (SSR markers were found within this region and used to screen the genotypes of 636 BC1 plants, delimiting PhR10 to a 2.57 Mb interval between markers P52-11-21 (1.5 cM away and P52-11-41 (1.1 cM. A total of 163 genes were annotated within this region and 31 were predicted to be associated with disease resistance. PhR10 is a novel race specific gene for PRR, and this paper describes linked SSR markers suitable for marker-assisted selection of PRR resistant varieties, also laying a foundation for cloning the resistance gene.

  12. Resistivity Measurements on Bulk Bi2Sr2CaCu2O8+δ: Contribution of Vortices at Low Magnetic Fields

    Directory of Open Access Journals (Sweden)

    Clarina de la Cruz

    1999-12-01

    Full Text Available The behavior of high-temperature superconductors in the presence of an external magnetic field is of particular interest in light of its technological application and commercialization. In this paper, we performed resistivity measurements on bulk superconducting pellets of Bi2Sr2CaCu2O8+δ in the presence of external magnetic fields below 0.5T. The broadening of the transition region below Tc in the resistivity plots, was attributed to the residual resistance imparted by flux flow in the sample. From I-V measurements at 50 K at fields below 0.6T, the contribution of vortices was quantitatively measured as a flux flow resistivity which range from 0.1231 to 1.700 (m(-mm for applied magnetic fields from 0.04T to 0.6T. The increase in the flux flow resistivity with increasing applied field was due to the increase in the number of vortices moving in steady state motion brought about by the interaction of the vortices with the transport current.

  13. Inheritance and bulked segregant analysis of leaf rust and stem rust resistance genes in eight durum wheat genotypes

    Science.gov (United States)

    Leaf rust, caused by Puccinia triticina (Pt) and stem rust caused by Puccinia graminis f. sp. tritici (Pgt) are important diseases of durum wheat. This study determined the inheritance and genomic locations of leaf rust resistance (Lr) genes to Pt-race BBBQJ and stem rust resistance (Sr) genes to Pg...

  14. Resistência de estafilococos de origem canina, frente à drogas anti microbianas em Londrina, PR.

    Directory of Open Access Journals (Sweden)

    Amauri Alcindo Alfieri

    1985-11-01

    Full Text Available The sensitivity of 71 staphylococci (S. aureus and S. intermedius, isolated from dogs with signs of skin disease, to J1 chemotherapeutic agents was determined. Of the strains, 55(77,46% were resistant to amicacin, 29(40,84% to penicillin G, 26(36,61% to ampicillin, 24(33,80% to tetracycline, 15(21,13% to chloramphenicol, 12(16,90% to erytromycin, 11(15,49% to kanamycin, 8(11,27% to gentamycin, 5(7,04% to sulfazothrim, 2(2,82% to cefoxithin and 1(1,41% to oxacillin.Foram examinadas 71 cepas de estafilococos (S. aureus e S. intermedius isoladas a partir de cães com pioderma, frente a 11 substâncias antimicrobianas. Das cepas, 55(77,46% apresentaram resistência à amicacina, 29(40,84% à penicilina G, 26(36,61% à ampicilina, 24(33,80% à tetraciclina, 15(21,13% ao cloranfenicol, 12(16,90% à eritromicina, 11(15,49% à canamicina, 8(11,27% à gentamicina, 5(7,04% ao sulfazotrim, 2(2,82% à cefoxitina e 1(1,41% a oxacilina.

  15. Multiple Patterns of Regulation and Overexpression of a Ribonuclease-Like Pathogenesis-Related Protein Gene, OsPR10a, Conferring Disease Resistance in Rice and Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Li-Fen Huang

    Full Text Available An abundant 17 kDa RNase, encoded by OsPR10a (also known as PBZ1, was purified from Pi-starved rice suspension-cultured cells. Biochemical analysis showed that the range of optimal temperature for its RNase activity was 40-70°C and the optimum pH was 5.0. Disulfide bond formation and divalent metal ion Mg2+ were required for the RNase activity. The expression of OsPR10a::GUS in transgenic rice was induced upon phosphate (Pi starvation, wounding, infection by the pathogen Xanthomonas oryzae pv. oryzae (Xoo, leaf senescence, anther, style, the style-ovary junction, germinating embryo and shoot. We also provide first evidence in whole-plant system, demonstrated that OsPR10a-overexpressing in rice and Arabidopsis conferred significant level of enhanced resistance to infection by the pathogen Xoo and Xanthomona campestris pv. campestris (Xcc, respectively. Transgenic rice and Arabidopsis overexpressing OsPR10a significantly increased the length of primary root under phosphate deficiency (-Pi condition. These results showed that OsPR10a might play multiple roles in phosphate recycling in phosphate-starved cells and senescing leaves, and could improve resistance to pathogen infection and/or against chewing insect pests. It is possible that Pi acquisition or homeostasis is associated with plant disease resistance. Our findings suggest that gene regulation of OsPR10a could act as a good model system to unravel the mechanisms behind the correlation between Pi starvation and plant-pathogen interactions, and also provides a potential application in crops disease resistance.

  16. Gene expression profiling by cDNA-AFLP reveals potential candidate genes for partial resistance of 'Président Roulin' against Venturia inaequalis.

    Science.gov (United States)

    Bastiaanse, Héloïse; Muhovski, Yordan; Parisi, Olivier; Paris, Roberta; Mingeot, Dominique; Lateur, Marc

    2014-11-29

    Scab, caused by the fungus Venturia inaequalis, is one of the most important diseases of cultivated apple. While a few scab resistance genes (R genes) governing qualitative resistance have been isolated and characterized, the biological roles of genes governing quantitative resistance, supposed to be more durable, are still unknown. This study aims to investigate the molecular mechanisms involved in the partial resistance of the old Belgian apple cultivar 'Président Roulin' against V. inaequalis. A global gene expression analysis was conducted in 'Président Roulin' (partially resistant) and in 'Gala' (susceptible) challenged by V. inaequalis by using the cDNA-AFLP method (cDNA-Amplified Fragment Length Polymorphism). Transcriptome analysis revealed significant modulation (up- or down-regulation) of 281 out of approximately 20,500 transcript derived fragments (TDFs) in 'Président Roulin' 48 hours after inoculation. Sequence annotation revealed similarities to several genes encoding for proteins belonging to the NBS-LRR and LRR-RLK classes of plant R genes and to other defense-related proteins. Differentially expressed genes were sorted into functional categories according to their gene ontology annotation and this expression signature was compared to published apple cDNA libraries by Gene Enrichment Analysis. The first comparison was made with two cDNA libraries from Malus x domestica uninfected leaves, and revealed in both libraries a signature of enhanced expression in 'Président Roulin' of genes involved in response to stress and photosynthesis. In the second comparison, the pathogen-responsive TDFs from the partially resistant cultivar were compared to the cDNA library from inoculated leaves of Rvi6 (HcrVf2)-transformed 'Gala' lines (complete disease resistance) and revealed both common physiological events, and notably differences in the regulation of defense response, the regulation of hydrolase activity, and response to DNA damage. TDFs were in silico

  17. Analysis of Extreme Phenotype Bulk Copy Number Variation (XP-CNV Identified the Association of rp1 with Resistance to Goss's Wilt of Maize

    Directory of Open Access Journals (Sweden)

    Ying Hu

    2018-02-01

    Full Text Available Goss's wilt (GW of maize is caused by the Gram-positive bacterium Clavibacter michiganensis subsp. nebraskensis (Cmn and has spread in recent years throughout the Great Plains, posing a threat to production. The genetic basis of plant resistance is unknown. Here, a simple method for quantifying disease symptoms was developed and used to select cohorts of highly resistant and highly susceptible lines known as extreme phenotypes (XP. Copy number variation (CNV analyses using whole genome sequences of bulked XP revealed 141 genes containing CNV between the two XP groups. The CNV genes include the previously identified common rust resistant locus rp1. Multiple Rp1 accessions with distinct rp1 haplotypes in an otherwise susceptible accession exhibited hypersensitive responses upon inoculation. GW provides an excellent system for the genetic dissection of diseases caused by closely related subspecies of C. michiganesis. Further work will facilitate breeding strategies to control GW and provide needed insight into the resistance mechanism of important related diseases such as bacterial canker of tomato and bacterial ring rot of potato.

  18. Temperature dependence of colossal electro-resistance of Pr0.7Ca0.3MnO3 thin films

    International Nuclear Information System (INIS)

    Odagawa, A.; Kanno, T.; Adachi, H.; Sato, H.; Inoue, I.H.; Akoh, H.; Kawasaki, M.; Tokura, Y.

    2005-01-01

    The electronic conduction through a Pr 0.7 Ca 0.3 MnO 3 thin film is investigated by measurements using dc and pulsed bias. Pr 0.7 Ca 0.3 MnO 3 films sandwiched by electrodes exhibit two stable resistance states by means of applying voltage pulses. Both of the states show semiconducting behavior. The ratio of the two resistance states induces a colossal electro-resistance (CER) effect greater than 1000%. The CER behavior is seen in the temperature range of 300 K down to 150 K. The observed conduction characteristics exhibit the space-charge-limited-current effect, and the switching behavior can be ascribed to a carrier trapping/detrapping of the trap sites in the perovskite manganite

  19. Electric-pulse-induced resistance switching effect in the bulk of La0.5Ca0.5MnO3 ceramics

    Directory of Open Access Journals (Sweden)

    M. L. Wu

    2014-04-01

    Full Text Available In the majority of contributions, the electrical–pulse-induced resistance (EPIR switching effect of perovskite manganites is thought to originate from the extrinsic interfacial Schottky barrier between the metal electrode and the surface of sample. In this work, La0.5Ca0.5MnO3 (LCMO ceramic samples were synthesized by solid state reaction and the transport properties, especially, the EPIR effect and memristor behavior were investigated under 4-wire method using silver-glue as electrodes. Although the I-V characteristic of LCMO shows an ohmic linearity under the 4-wire mode at room temperature, a stable and remarkable EPIR can still be observed when the pulse voltage is more than a critical value. This bulk EPIR effect is novel for rare - earth doped manganites.

  20. Prevalence and characteristics of methicillin-resistant coagulase-negative staphylococci from livestock, chicken carcasses, bulk tank milk, minced meat, and contact persons

    Directory of Open Access Journals (Sweden)

    Zweifel Claudio

    2011-01-01

    Full Text Available Abstract Background Methicillin-resistant coagulase-negative staphylococci (MR-CNS are of increasing importance to animal and public health. In veterinary medicine and along the meat and milk production line, only limited data were so far available on MR-CNS characteristics. The aim of the present study was to evaluate the prevalence of MR-CNS, to identify the detected staphylococci to species level, and to assess the antibiotic resistance profiles of isolated MR-CNS strains. Results After two-step enrichment and growth on chromogenic agar, MR-CNS were detected in 48.2% of samples from livestock and chicken carcasses, 46.4% of samples from bulk tank milk and minced meat, and 49.3% of human samples. Using matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS, 414 selected MR-CNS strains belonged to seven different species (S. sciuri, 32.6%; S. fleurettii, 25.1%; S. haemolyticus, 17.4%; S. epidermidis, 14.5%, S. lentus, 9.2%; S. warneri, 0.7%; S. cohnii, 0.5%. S. sciuri and S. fleurettii thereby predominated in livestock, BTM and minced meat samples, whereas S. epidermidis and S. haemolyticus predominated in human samples. In addition to beta-lactam resistance, 33-49% of all 414 strains were resistant to certain non-beta-lactam antibiotics (ciproflaxacin, clindamycin, erythromycin, tetracycline. Conclusions A high prevalence of MR-CNS was found in livestock production. This is of concern in view of potential spread of mecA to S. aureus (MRSA. Multiresistant CNS strains might become an emerging problem for veterinary medicine. For species identification of MR-CNS isolated from different origins, MALDI-TOF MS proved to be a fast and reliable tool and is suitable for screening of large sample amounts.

  1. Effects of configurational changes on electrical resistivity during glass-liquid transition of two bulk metal-alloy glasses

    Science.gov (United States)

    Aji, D. P. B.; Johari, G. P.

    2014-12-01

    Consequences of increase in structural fluctuations on heating Pd40Ni10Cu30P20 and Zr46.75Ti8.25Cu7.5Ni10Be27.5 through their glass to liquid transition range were investigated by measuring the electrical resistivity, ρ, an electron scattering property. The temperature coefficient of resistivity (TCR = (1/ρ) dρ/dT) of the liquid and glassy states is negative. The plots of their ρ against T in the Tg (glass to liquid transition) range show a gradual change in the slope similar to the change observed generally for the plots of the density, elastic modulus, and refractive index. As fluctuations in the melt structure involve fewer configurations on cooling, ρ increases. In the energy landscape description, the melt's structure explores fewer minima with decrease in T, vibrational frequencies increase, and electron scattering and ρ increase. Plots of (-dρ/dT) against T resemble the plot of the specific heat of other glasses and show a sub-Tg feature and a rapid rise at T near Tg. Analysis shows that the magnitude of negative TCR is dominated by change in the phonon characteristics, and configurational fluctuations make it more negative. The TCR of the liquid and glassy states seems qualitatively consistent with the variation in the structure factor in Ziman's model for pure liquid metals as extended by Nagel to metal alloys and used to explain the negative TCR of a two-component metal glass.

  2. Soil bulk electrical resistivity and forage ground cover: nonlinear models in an alfalfa (Medicago sativa L. case study

    Directory of Open Access Journals (Sweden)

    Roberta Rossi

    2015-12-01

    Full Text Available Alfalfa is a highly productive and fertility-building forage crop; its performance, can be highly variable as influenced by within-field soil spatial variability. Characterising the relations between soil and forage- variation is important for optimal management. The aim of this work was to model the relationship between soil electrical resistivity (ER and plant productivity in an alfalfa (Medicago sativa L. field in Southern Italy. ER mapping was accomplished by a multi-depth automatic resistivity profiler. Plant productivity was assessed through normalised difference vegetation index (NDVI at 2 dates. A non-linear relationship between NDVI and deep soil ER was modelled within the framework of generalised additive models. The best model explained 70% of the total variability. Soil profiles at six locations selected along a gradient of ER showed differences related to texture (ranging from clay to sandy-clay loam, gravel content (0 to 55% and to the presence of a petrocalcic horizon. Our results prove that multi-depth ER can be used to localise permanent soil features that drive plant productivity.

  3. Immunological mimicry of PrPC-PrPSc interactions: antibody-induced PrP misfolding.

    Science.gov (United States)

    Li, Li; Guest, Will; Huang, Alan; Plotkin, Steven S; Cashman, Neil R

    2009-08-01

    Prion diseases are associated with the conversion of cellular prion protein (PrP(C)) to an abnormal protease-resistant conformational isoform (PrP(Sc)) by template-directed conversion. The interaction between PrP(C) and PrP(Sc) is mediated by specific sites which have been mapped to six putative 'binding and conversion domains' (PrP-BCD) through peptide and antibody competition studies. Monoclonal antibodies (mAbs) directed against the bityrosine motif Tyr-Tyr-Arg (YYR) specifically recognize PrP(Sc) and other misfolded PrP species. Here, we report that select bead-bound PrP-BCD mAbs induce exposure of bityrosine epitopes on mouse brain PrP. By competition immunoprecipitation, we show that PrP-BCD mAb-induced bityrosine exposure occurs at alpha-helices 1 and 3. However, PrP-BCD mAb-induced PrP(C) misfolding is not accompanied by beta-sheet dissociation, a key event in PrP(C) conversion to PrP(Sc), and is not associated with acquisition of protease resistance, or the capacity to recruit additional molecules of PrP. Our data suggest that mAb mimics of the physical interaction of PrP(C) with PrP(Sc) can induce unfolding of specific PrP domains, but that subsequent processes (including the energetically unfavorable beta-sheet dissociation) effect isoform conversion in prion disease.

  4. Complete nucleotide sequence of the multidrug resistance IncA/C plasmid pR55 from Klebsiella pneumoniae isolated in 1969.

    Science.gov (United States)

    Doublet, Benoît; Boyd, David; Douard, Gregory; Praud, Karine; Cloeckaert, Axel; Mulvey, Michael R

    2012-10-01

    To determine the complete nucleotide sequence of the multidrug resistance IncA/C plasmid pR55 from a clinical Klebsiella pneumoniae strain that was isolated from a urinary tract infection in 1969 in a French hospital and compare it with those of contemporary emerging IncA/C plasmids. The plasmid was purified and sequenced using a 454 sequencing approach. After draft assembly, additional PCRs and walking reads were performed for gap closure. Sequence comparisons and multiple alignments with other IncA/C plasmids were done using the BLAST algorithm and CLUSTAL W, respectively. Plasmid pR55 (170 810 bp) revealed a shared plasmid backbone (>99% nucleotide identity) with current members of the IncA/C(2) multidrug resistance plasmid family that are widely disseminating antibiotic resistance genes. Nevertheless, two specific multidrug resistance gene arrays probably acquired from other genetic elements were identified inserted at conserved hotspot insertion sites in the IncA/C backbone. A novel transposon named Tn6187 showed an atypical mixed transposon configuration composed of two mercury resistance operons and two transposition modules that are related to Tn21 and Tn1696, respectively, and an In0-type integron. IncA/C(2) multidrug resistance plasmids have a broad host range and have been implicated in the dissemination of antibiotic resistance among Enterobacteriaceae from humans and animals. This typical IncA/C(2) genetic scaffold appears to carry various multidrug resistance gene arrays and is now also a successful vehicle for spreading AmpC-like cephalosporinase and metallo-β-lactamase genes, such as bla(CMY) and bla(NDM), respectively.

  5. Prevalence and molecular characteristics of Staphylococcus aureus, including methicillin resistant strains, isolated from bulk can milk and raw milk products in pastoral communities of South-West Uganda.

    Science.gov (United States)

    Asiimwe, Benon B; Baldan, Rossella; Trovato, Alberto; Cirillo, Daniela M

    2017-06-13

    Staphylococcus aureus strains are now regarded as zoonotic agents. In pastoral settings where human-animal interaction is intimate, multi-drug resistant microorganisms have become an emerging zoonotic issue of public health concern. The study of S. aureus prevalence, antimicrobial resistance and clonal lineages in humans, animals and food in African settings has great relevance, taking into consideration the high diversity of ethnicities, cultures and food habits that determine the lifestyle of the people. Little is known about milk carriage of methicillin resistant S. aureus strains (MRSA) and their virulence factors in Uganda. Here, we present the prevalence of MRSA in bulk can milk and raw milk products in pastoral communities of south-west Uganda. We also present PFGE profiles, spa-types, as well as frequency of enterotoxins genes. S. aureus was identified by the coagulase test, susceptibility testing by the Kirby-Bauer disc diffusion and E-test methods and MRSA by detection of the mecA gene and SCCmec types. The presence of Panton - Valentine Leucocidin (PVL) genes and staphylococcal enterotoxins was determined by PCR, while genotyping was by PFGE and spa typing. S. aureus were isolated from 30/148 (20.3%) milk and 11/91(12%) sour milk samples. mecA gene carriage, hence MRSA, was detected in 23/41 (56.1%) of the isolates, with 21 of the 23 (91.3%) being SCCmec type V; while up to 30/41 (73.2%) of the isolates were resistant to tetracycline. Only five isolates carried the PVL virulence gene, while PFGE typing revealed ten clusters (ranging from two seven isolates each) that comprised 83% of the sample, and only eight isolates with unique pulsotypes. The largest PFGE profile (E) consisted of seven isolates while t7753, t1398, and t2112 were the most common spa-types. Thirty seven of the 41 strains (90.2%) showed at least one of the eight enterotoxin genes tested, with sem 29 (70.7%), sei 25 (61%) and seg 21 (51.2%) being the most frequently observed genes. This

  6. Recovery of oscillatory magneto-resistance in phase separated La0.3Pr0.4Ca0.3MnO3 epitaxial thin films

    International Nuclear Information System (INIS)

    Alagoz, H. S.; Jeon, J.; Mahmud, S. T.; Saber, M. M.; Chow, K. H.; Jung, J.; Prasad, B.; Egilmez, M.

    2013-01-01

    In-plane angular dependent magneto-resistance has been studied in La 0.3 Pr 0.4 Ca 0.3 MnO 3 (LPCMO) manganite thin films deposited on the (100) oriented NdGaO 3 , and (001) oriented SrTiO 3 and LaAlO 3 substrates. At temperatures where the electronic phase separation is the strongest, a metastable irreversible state exists in the films whose resistivity ρ attains a large time dependent value. The ρ decreases sharply with an increasing angle θ between the magnetic field and the current, and does not display an expected oscillatory cos 2 θ/sin 2 θ dependence for all films. The regular oscillations are recovered during repetitive sweeping of θ between 0° and 180°. We discuss possible factors that could produce these unusual changes in the resistivity

  7. Prevalence of Staphylococcus aureus and of methicillin-resistant S. aureus clonal complexes in bulk tank milk from dairy cattle herds in Lombardy Region (Northern Italy).

    Science.gov (United States)

    Cortimiglia, C; Luini, M; Bianchini, V; Marzagalli, L; Vezzoli, F; Avisani, D; Bertoletti, M; Ianzano, A; Franco, A; Battisti, A

    2016-10-01

    Staphylococcus aureus is the most important causative agent of subclinical mastitis in cattle resulting in reduced milk production and quality. Methicillin-resistant S. aureus (MRSA) strains has a clear zoonotic relevance, especially in the case of occupational exposure. The aim of the study was to evaluate the prevalence of S. aureus and MRSA in bulk tank milk (BTM) from dairy cattle herds in the Lombardy Region (Northern Italy) and to identify the main MRSA circulating genotypes. MRSA strains were characterized by susceptibility testing, multi-locus sequence typing (MLST), spa typing and SCCmec typing. A total 844 BTM samples were analysed and S. aureus and MRSA were detected in 47·2% and 3·8% of dairy herds, respectively. MLST showed that the majority (28/32) of isolates belonged to the typical livestock-associated lineages: ST398, ST97 and ST1. Interestingly, in this study we report for the first time the new ST3211, a single locus variant of ST(CC)22, with the newly described 462 aroE allele. Our study indicates high diffusion of S. aureus mastitis and low, but not negligible, prevalence of MRSA in the considered area, suggesting the need for planning specific control programmes for bovine mastitis caused by S. aureus, especially when MRSA is implicated.

  8. Resistance changes of Pr0.7Ca0.3MnO3 films deposited through rf-magnetron sputtering

    International Nuclear Information System (INIS)

    Lee, Kwangseok; Han, Seungwoo; Park, Kyoungwan; Sok, Junghyun

    2006-01-01

    In this paper, the resistance-change behavior of a perovskite material was studied. In particular, Pr 0.7 Ca 0.3 MnO 3 (PCMO) films were deposited on a Pt bottom electrode by using an rf-magnetron sputtering system. The PCMO films showed a resistance-switching behavior at room temperature. They were then deposited at 300 .deg. C with different oxygen flow rates, and the deposited films were post-annealed at various temperatures in an O 2 or N 2 atmosphere. The ratio of the resistance change of the post-annealed PCMO films in the high-resistance state to that in the low-resistance state in an O 2 atmosphere turned out to be much larger than that of the post-annealed films in a N 2 atmosphere. The electrical properties of the PCMO films were also significantly affected by the top electrode. The resistance changes of the Ag/PCMO/Pt device turned out to be larger than those of the Au/PCMO/Pt device. It can, therefore, be concluded that the O 2 content and the top electrode improve the electroresistance.

  9. Selection Role on Configuration of Resistance / Susceptibility Degree to Scrapie and on Genetic Diversity at PrP Locus in the Botosani Karakul Sheep Breed

    Directory of Open Access Journals (Sweden)

    Gheorghe Hrinca

    2017-05-01

    Full Text Available The molecular-genetic profiles from the determinant locus of scrapie have been described in the Botosani Karakul breed. Sheep belonged to two farm types: elite farm from Research and Development Station for Sheep and Goat Breeding, Popauti-Botosani and several production farms of some private farmers. The two farm types differ between them by selective specificities; in the farm elite the selection pressure is stronger and the selection criteria applied to sheep have been more accuracy than in the production farms. Sheep genotyping at the PrP locus was achieved by the Real-Time PCR method. By framing the individuals in risk classes concerning the prion disease, there were identified significant differences between the two farm types in terms of resistance / susceptibility to scrapie of sheep. The elite farm population is significantly advantaged as regards the molecular-genetic endowment at the PrP locus and low probability converting of the PrPc normal protein in the PrPSc pathogenic isomorph compared to the population of production farms. The reasons for the different associations of prion genotypes with morbid phenomenon intensity in the two farm types must be sought exclusively in the characteristics of selection systems applied to the animals in each farm type. From the standpoint of informational statistics, there is a high degree of genetic similarity at the PrP locus between the two populations. Contrary to expectations, the genetic diversity of prion structures is more developed in the elite farm than in the production farms. The knowing importance of prion profiles was revealed  in pursuit of genetic and veterinary prophylaxis of the sheep populations.

  10. The tomato UV-damaged DNA-binding protein-1 (DDB1) is implicated in pathogenesis-related (PR) gene expression and resistance to Agrobacterium tumefaciens.

    Science.gov (United States)

    Liu, Jikai; Li, Hanjing; Miao, Min; Tang, Xiaofeng; Giovannoni, Jim; Xiao, Fangming; Liu, Yongsheng

    2012-02-01

    Plants defend themselves against potential pathogens via the recognition of pathogen-associated molecular patterns (PAMPs). However, the molecular mechanisms underlying this PAMP-triggered immunity (PTI) are largely unknown. In this study, we show that tomato HP1/DDB1, coding for a key component of the CUL4-based ubiquitin E3 ligase complex, is required for resistance to Agrobacterium tumefaciens. We found that the DDB1-deficient mutant (high pigment-1, hp1) is susceptible to nontumorigenic A. tumefaciens. The efficiency of callus generation from the hp1 cotyledons was extremely low as a result of the necrosis caused by Agrobacterium infection. On infiltration of nontumorigenic A. tumefaciens into leaves, the hp1 mutant moderately supported Agrobacterium growth and developed disease symptoms, but the expression of the pathogenesis-related gene SlPR1a1 and several PTI marker genes was compromised at different levels. Moreover, exogenous application of salicylic acid (SA) triggered SlPR1a1 gene expression and enhanced resistance to A. tumefaciens in wild-type tomato plants, whereas these SA-regulated defence responses were abolished in hp1 mutant plants. Thus, HP1/DDB1 may function through interaction with the SA-regulated PTI pathway in resistance against Agrobacterium infection. © 2011 THE AUTHORS. MOLECULAR PLANT PATHOLOGY © 2011 BSPP AND BLACKWELL PUBLISHING LTD.

  11. Anatomy of a nonhost disease resistance response of pea to Fusarium solani: PR gene elicitation via DNase, chitosan and chromatin alterations.

    Directory of Open Access Journals (Sweden)

    Lee A Hadwiger

    2015-06-01

    Full Text Available Of the multiplicity of plant pathogens in nature, only a few are virulent on a given plant species. Conversely, plants develop a rapid nonhost resistance response to the majority of the pathogens. The anatomy of the nonhost resistance of pea endocarp tissue against a pathogen of bean, Fusarium solani f.sp. phaseoli (Fsph and the susceptibility of pea to F. solani f sp. pisi (Fspi has been described cytologically, biochemically and molecular-biologically. Cytological changes have been followed by electron microscope and stain differentiation under white and UV light. The induction of changes in transcription, protein synthesis, expression of pathogenesis-related (PR genes, and increases in metabolic pathways culminating in low molecular weight, antifungal compounds are described biochemically. Molecular changes initiated by fungal signals to host organelles, primarily to the chromatin within host nuclei, are identified according to source of the signal and the mechanisms utilized in activating defense genes. The functions of some PR genes are defined. A hypothesis based on this data is developed to explain both why fungal growth is suppressed in nonhost resistance and why growth can continue in a susceptible reaction.

  12. Splitting strength and abrasion resistance of concrete paving blocks as a function of dry bulk specific gravity and ultrasonic pulse velocity

    Directory of Open Access Journals (Sweden)

    Haktanir, T.

    2005-06-01

    Full Text Available Artificial Portland cement concrete paving blocks are widely used in many countries. These paving blocks come in a variety of designs with names such as "Interlocking" and "Italian Flower", and are manufactured with special machinery using rather high quality concrete having a compressive strength of about 50 MPa. Concrete blocks are employed instead of natural cobble stones for essentially economic reasons. The laboratoiy equipment required to measure paving block splitting strength and abrasion resistance, two of the chief properties to be tested in quality checks, is costly and the tests are time-consuming and labour-intensive. The present paper reports on a detailed experimental study performed to relate the splitting strength and abrasion resistance of concrete paving blocks to "dry bulk specific gravity" (DBSG and "ultrasonic pulse velocity" (UPV, respectively. Statistically significant regression equations describing the dependence of splitting strength on DBSG and abrasion resistance on UPV were obtained with data from random samples of material provided by seven different manufacturers.

    RESUMEN Los bloques para pavimentos (adoquines elaborados con hormigón se utilizan habitualmente en numerosos países. Estos bloques de pavimentación se diseñan de diversas formas, como por ejemplo "Entrelazado " ("Interlocking " o "Flor Italiana " ("Italian Flower"; se fabrican con maquinaria especial y con frecuencia se utiliza hormigón de la más alta calidad, con resistencia a la compresión de alrededor de 50 MPa. La razón de utilizar bloques de hormigón en lugar de bloques de piedra natural es básicamente económica. Los equipos de laboratorio necesarios para medir la resistencia a la compresión y a la abrasión -dos de las propiedades más importantes para determinar la calidad de los bloques en estudio- son costosos y los ensayos requieren tiempo y mano de obra considerables. En el presente trabajo se exponen ensayos experimentales

  13. Ion-irradiation resistance of the orthorhombic Ln2TiO5 (Ln = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy) series

    International Nuclear Information System (INIS)

    Aughterson, Robert D.; Lumpkin, Gregory R.; Ionescu, Mihail; Reyes, Massey de los; Gault, Baptiste; Whittle, Karl R.; Smith, Katherine L.; Cairney, Julie M.

    2015-01-01

    The response of Ln 2 TiO 5 (where Ln is a lanthanide) compounds exposed to high-energy ions was used to test their suitability for nuclear-based applications, under two different but complementary conditions. Eight samples with nominal stoichiometry Ln 2 TiO 5 (Ln = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy), of orthorhombic (Pnma) structure were irradiated, at various temperatures, with 1 MeV Kr 2+ ions in-situ within a transmission electron microscope. In each case, the fluence was increased until a phase transition from crystalline to amorphous was observed, termed critical dose D c . At certain elevated temperatures, the crystallinity was maintained irrespective of fluence. The critical temperature for maintaining crystallinity, T c , varied non-uniformly across the series. The T c was consistently high for La, Pr, Nd and Sm 2 TiO 5 before sequential improvement from Eu to Dy 2 TiO 5 with T c 's dropping from 974 K to 712 K. In addition, bulk Dy 2 TiO 5 was irradiated with 12 MeV Au + ions at 300 K, 723 K and 823 K and monitored via grazing-incidence X-ray diffraction (GIXRD). At 300 K, only amorphisation is observed, with no transition to other structures, whilst at higher temperatures, specimens retained their original structure. The improved radiation tolerance of compounds containing smaller lanthanides has previously been attributed to their ability to form radiation-induced phase transitions. No such transitions were observed here. - Highlights: • First ion-irradiation studies on a number of novel compounds including Pr 2 TiO 5 , Eu 2 TiO 5 and Tb 2 TiO 5 . • Systematic in-situ ion-irradiation study of almost complete Ln 2 TiO 5 series (Ln = lanthanides) with orthorhombic crystal structure type. • The first grazing incidence study of bulk irradiated Dy 2 TiO 5 looking for irradiation induced phase transition.

  14. Opposite effects of dextran sulfate 500, the polyene antibiotic MS-8209, and Congo red on accumulation of the protease-resistant isoform of PrP in the spleens of mice inoculated intraperitoneally with the scrapie agent.

    Science.gov (United States)

    Beringue, V; Adjou, K T; Lamoury, F; Maignien, T; Deslys, J P; Race, R; Dormont, D

    2000-06-01

    The mode and the site of action of the major antiscrapie drugs have been studied by investigating their effects on the abnormal protease-resistant isoform of PrP (PrPres) and on its accumulation in mouse spleen. Day-by-day PrPres accumulation in the spleen and in other peripheral organs was first monitored to describe the early steps of scrapie pathogenesis. Three phases were identified: the detection of scrapie inoculum on the day of scrapie infection, a clearance phase, and then the peripheral accumulation of PrPres. In a second step, the effects of the polyene antibiotic MS-8209, the polyanion dextran sulfate 500 (DS500), and Congo red were assessed on these phases, after the drugs were coincubated with scrapie inoculum. Highly different mechanisms and sites of action were apparent. MS-8209 had a weak effect on the accumulation of PrPres in spleen, suggesting another site of intervention for this drug. DS500 delayed the beginning of the clearance phase but then blocked PrPres synthesis for a long period of time, probably because of its immunological effects on the spleen. Surprisingly, Congo red suppressed the clearance phase of scrapie inoculum and then increased transiently accumulation of PrPres in spleen. We showed in vitro that this effect was related to a direct enhancement of the protease resistance of PrPres by the drug.

  15. Electrical Characterization of Temperature Dependent Resistive Switching in Pr0.7C0.3MnO3

    Science.gov (United States)

    Lopez, Melinda; Salvo, Christopher; Tsui, Stephen

    2012-02-01

    Resistive switching offers a non-volatile and reversible means to possibly create a more physically compact yet larger access capacity in memory technology. While there has been a great deal of research conducted on this electrical property in oxide materials, there is still more to be learned about this at both high voltage pulsing and cryogenic temperatures. In this work, the electrical properties of a PCMO-metal interface switch were examined after application of voltage pulsing varying from 100 V to 1000 V and at temperatures starting at 293 K and lowered to 80 K. What was discovered was that below temperatures of 150 K, the resistive switching began to decrease across all voltage pulsing and that at all temperatures before this cessation, the change in resistive switching increased with higher voltage pulsing. We suggest that a variable density of charge traps at the interface is a likely mechanism, and work continues to extract more details.

  16. The observation of valence band change on resistive switching of epitaxial Pr0.7Ca0.3MnO3 film using removable liquid electrode

    Science.gov (United States)

    Lee, Hong-Sub; Park, Hyung-Ho

    2015-12-01

    The resistive switching (RS) phenomenon in transition metal oxides (TMOs) has received a great deal of attention for non-volatile memory applications. Various RS mechanisms have been suggested as to explain the observed RS characteristics. Many reports suggest that changes of interface and the role of oxygen vacancies originate in RS phenomena; therefore, in this study, we use a liquid drop of mercury as the top electrode (TE), epitaxial Pr0.7Ca0.3MnO3 (PCMO) (110) film of the perovskite manganite family for RS material, and an Nb-doped (0.7 at. %) SrTiO3 (100) single crystal as the substrate to observe changes in the interface between the TE and TMOs. The use of removable liquid electrode Hg drop as TE not only enables observation of the RS characteristic as a bipolar RS curve (counterclockwise) but also facilitates analysis of the valence band of the PCMO surface after resistive switching via photoelectron spectroscopy. The observed I-V behaviors of the low and high resistance states (HRS) are explained with an electrochemical migration model in PCMO film where accumulated oxygen vacancies at the interface between the Hg TE and PCMO (110) surface induce the HRS. The interpreted RS mechanism is directly confirmed via valence band spectrum analysis.

  17. Oxygen diffusion in Y sub 1 sub - sub x Pr sub x Ba sub 2 Cu sub 3 O sub 7 sub - subdelta observed by resistivity measurements

    CERN Document Server

    Diosa, J E; Mellander, B E

    1997-01-01

    In situ resistivity measurements have been used to monitor the oxygen uptake and removal for the ceramic system Y sub 1 sub - sub x Pr sub x Ba sub 2 Cu sub 3 O sub 7 sub - subdelta (YPBCO) in the temperature range 300 - 1000 K. The study of the out-diffusion of oxygen was performed by annealing the oxygenated samples in ambient air at constant heating rates. We found that, independently of x, the oxygen concentration O sub 7 sub - subdelta is preserved up to 600 K, and that oxygen diffuses out of the oxides at temperatures higher than 600 K. However, the rate of oxygen removal from PrBa sub 2 Cu sub 3 O sub 7 sub - subdelta (PBCO) is greatly reduced as compared to the rate for pure YBa sub 2 Cu sub 3 O sub 7 sub - subdelta (YBCO), and decreases with increasing x in YPBCO. The study of the in-diffusion of oxygen was performed by annealing the deoxygenated samples in ambient air at constant heating rates. We found that, independently of x, the oxygen uptake takes place in the temperature range 550 - 750 K, whe...

  18. Progesterone receptor (PR) isoforms PRA and PRB differentially regulate expression of the breast cancer resistance protein in human placental choriocarcinoma BeWo cells.

    Science.gov (United States)

    Wang, Honggang; Lee, Eun-Woo; Zhou, Lin; Leung, Peter C K; Ross, Douglas D; Unadkat, Jashvant D; Mao, Qingcheng

    2008-03-01

    Breast cancer resistance protein (BCRP) plays a significant role in drug disposition and in conferring multidrug resistance in cancer cells. Previous studies have shown that steroid hormones such as 17beta-estradiol and progesterone can affect BCRP expression in cancer cells. In this study, we investigated the molecular mechanism by which BCRP expression in human placental choriocarcinoma BeWo cells is regulated by progesterone. Transfection of the progesterone receptor (PR) isoforms PRA and PRB resulted in a similarly increased expression of PRA and PRB, respectively. However, progesterone significantly increased BCRP expression and activity only in PRB-transfected cells. This stimulatory effect of progesterone was abrogated by the PR antagonist mifepristone (RU-486). Consistently, transcriptional activity of the BCRP promoter was induced 2- to 6-fold by 10(-8) to 10(-5) M progesterone in PRB-transfected cells. Progesterone had little effect on BCRP expression and activity and transcriptional activity of the BCRP promoter in PRA-transfected cells; however, cotransfection of PRA and PRB significantly decreased the progesterone-response compared with that in cells transfected with only PRB. Mutations in a novel progesterone response element (PRE) identified between -243 to -115 bp of the BCRP promoter region significantly attenuated the progesterone-response in PRB-transfected cells, and deletion of the PRE nearly completely abrogated the progesterone effect. Specific binding of both PRA and PRB to the BCRP promoter through the identified PRE was confirmed using the electrophoretic mobility shift assay. Collectively, progesterone induces BCRP expression in BeWo cells via PRB but not PRA. PRA represses the PRB activity. Thus, PRA and PRB differentially regulate BCRP expression in BeWo cells.

  19. Development of Molecular Markers Linked to Powdery Mildew Resistance Gene Pm4b by Combining SNP Discovery from Transcriptome Sequencing Data with Bulked Segregant Analysis (BSR-Seq) in Wheat

    Science.gov (United States)

    Wu, Peipei; Xie, Jingzhong; Hu, Jinghuang; Qiu, Dan; Liu, Zhiyong; Li, Jingting; Li, Miaomiao; Zhang, Hongjun; Yang, Li; Liu, Hongwei; Zhou, Yang; Zhang, Zhongjun; Li, Hongjie

    2018-01-01

    Powdery mildew resistance gene Pm4b, originating from Triticum persicum, is effective against the prevalent Blumeria graminis f. sp. tritici (Bgt) isolates from certain regions of wheat production in China. The lack of tightly linked molecular markers with the target gene prevents the precise identification of Pm4b during the application of molecular marker-assisted selection (MAS). The strategy that combines the RNA-Seq technique and the bulked segregant analysis (BSR-Seq) was applied in an F2:3 mapping population (237 families) derived from a pair of isogenic lines VPM1/7∗Bainong 3217 F4 (carrying Pm4b) and Bainong 3217 to develop more closely linked molecular markers. RNA-Seq analysis of the two phenotypically contrasting RNA bulks prepared from the representative F2:3 families generated 20,745,939 and 25,867,480 high-quality read pairs, and 82.8 and 80.2% of them were uniquely mapped to the wheat whole genome draft assembly for the resistant and susceptible RNA bulks, respectively. Variant calling identified 283,866 raw single nucleotide polymorphisms (SNPs) and InDels between the two bulks. The SNPs that were closely associated with the powdery mildew resistance were concentrated on chromosome 2AL. Among the 84 variants that were potentially associated with the disease resistance trait, 46 variants were enriched in an about 25 Mb region at the distal end of chromosome arm 2AL. Four Pm4b-linked SNP markers were developed from these variants. Based on the sequences of Chinese Spring where these polymorphic SNPs were located, 98 SSR primer pairs were designed to develop distal markers flanking the Pm4b gene. Three SSR markers, Xics13, Xics43, and Xics76, were incorporated in the new genetic linkage map, which located Pm4b in a 3.0 cM genetic interval spanning a 6.7 Mb physical genomic region. This region had a collinear relationship with Brachypodium distachyon chromosome 5, rice chromosome 4, and sorghum chromosome 6. Seven genes associated with disease

  20. Development of Molecular Markers Linked to Powdery Mildew Resistance Gene Pm4b by Combining SNP Discovery from Transcriptome Sequencing Data with Bulked Segregant Analysis (BSR-Seq in Wheat

    Directory of Open Access Journals (Sweden)

    Peipei Wu

    2018-02-01

    Full Text Available Powdery mildew resistance gene Pm4b, originating from Triticum persicum, is effective against the prevalent Blumeria graminis f. sp. tritici (Bgt isolates from certain regions of wheat production in China. The lack of tightly linked molecular markers with the target gene prevents the precise identification of Pm4b during the application of molecular marker-assisted selection (MAS. The strategy that combines the RNA-Seq technique and the bulked segregant analysis (BSR-Seq was applied in an F2:3 mapping population (237 families derived from a pair of isogenic lines VPM1/7∗Bainong 3217 F4 (carrying Pm4b and Bainong 3217 to develop more closely linked molecular markers. RNA-Seq analysis of the two phenotypically contrasting RNA bulks prepared from the representative F2:3 families generated 20,745,939 and 25,867,480 high-quality read pairs, and 82.8 and 80.2% of them were uniquely mapped to the wheat whole genome draft assembly for the resistant and susceptible RNA bulks, respectively. Variant calling identified 283,866 raw single nucleotide polymorphisms (SNPs and InDels between the two bulks. The SNPs that were closely associated with the powdery mildew resistance were concentrated on chromosome 2AL. Among the 84 variants that were potentially associated with the disease resistance trait, 46 variants were enriched in an about 25 Mb region at the distal end of chromosome arm 2AL. Four Pm4b-linked SNP markers were developed from these variants. Based on the sequences of Chinese Spring where these polymorphic SNPs were located, 98 SSR primer pairs were designed to develop distal markers flanking the Pm4b gene. Three SSR markers, Xics13, Xics43, and Xics76, were incorporated in the new genetic linkage map, which located Pm4b in a 3.0 cM genetic interval spanning a 6.7 Mb physical genomic region. This region had a collinear relationship with Brachypodium distachyon chromosome 5, rice chromosome 4, and sorghum chromosome 6. Seven genes associated with

  1. Creating bulk nanocrystalline metal.

    Energy Technology Data Exchange (ETDEWEB)

    Fredenburg, D. Anthony (Georgia Institute of Technology, Atlanta, GA); Saldana, Christopher J. (Purdue University, West Lafayette, IN); Gill, David D.; Hall, Aaron Christopher; Roemer, Timothy John (Ktech Corporation, Albuquerque, NM); Vogler, Tracy John; Yang, Pin

    2008-10-01

    Nanocrystalline and nanostructured materials offer unique microstructure-dependent properties that are superior to coarse-grained materials. These materials have been shown to have very high hardness, strength, and wear resistance. However, most current methods of producing nanostructured materials in weapons-relevant materials create powdered metal that must be consolidated into bulk form to be useful. Conventional consolidation methods are not appropriate due to the need to maintain the nanocrystalline structure. This research investigated new ways of creating nanocrystalline material, new methods of consolidating nanocrystalline material, and an analysis of these different methods of creation and consolidation to evaluate their applicability to mesoscale weapons applications where part features are often under 100 {micro}m wide and the material's microstructure must be very small to give homogeneous properties across the feature.

  2. Pré-melhoramento de milho quanto à resistência a enfezamentos Maize pre-breeding for resistance to corn stunt

    Directory of Open Access Journals (Sweden)

    Flavia França Teixeira

    2013-01-01

    Full Text Available O objetivo deste trabalho foi selecionar famílias de milho derivadas do retrocruzamento entre o composto "NAP Corn Stunt" (genitor doador e linhagens-elite (genitores recorrentes, quanto à produtividade de grãos e à resistência a enfezamentos, e avaliar a eficiência do emprego de marcadores moleculares para avaliação fenotípica na seleção de genótipos com alta produtividade de grãos. Foram avaliados 100 genótipos, em cinco condições ambientais, na safra agrícola 2009/2010. Foram selecionadas famílias RC1F2, que aliam a alta produtividade dos genitores recorrentes à resistência aos enfezamentos, presente no genitor doador. As famílias selecionadas quanto ao desempenho agronômico e à resistência aos enfezamentos foram: L228-3-324-S, L228-3-237-R, L228-3-109-R, que foram indicadas para cruzamentos com linhagens do grupo heterótico duro; e L3-422-R e L3-586-R, que foram indicadas para cruzamentos com linhagens do grupo heterótico dentado. Na seleção de genótipos de alta produtividade de grãos, a seleção assistida por marcadores moleculares não é eficiente para a recuperação do genótipo do pai recorrente, em comparação à avaliação fenotípica.The objective of this work was to select maize families derived from backcrossing between the composite NAP Corn Stunt (donor parent and inbreed lines (recurrent parents, as to grain yield and resistance to corn stunt, and to evaluate the efficiency of the use of molecular markers in the phenotypic evaluation for the selection of genotypes with high grain yield. One hundred genotypes were evaluated in five environmental conditions in the 2009/2010 crop season. We selected RC1F2 families, which combine high grain yield present in the recurrent parents to resistance to corn stunt present in the donor parent. The selected maize families for agronomic performance and resistance to corn stunt were: L228-3-324-S, L228-3-237-R, L228-3-109-R, which were indicated for crosses

  3. Densidade, porosidade e resistência à penetração em Latossolo cultivado sob diferentes sistemas de preparo do solo Soil bulk density, porosity and resistance to root penetration in an Oxisol managed by different soil tillage systems

    Directory of Open Access Journals (Sweden)

    Cássio Antonio Tormena

    2002-12-01

    only along the crop row - NT, Minimum Tillage (subsoiling to the 0.30 m depth, followed by leveling - MT and Conventional Tillage (plowing with moldboard plow to the 0.25 m depth, followed by leveling - CT. The following soil physical properties were evaluated at the depths of 0-0.10 m and 0.10-0.20 m: soil bulk density (Bd, soil porosity, and the soil resistance to root penetration (SRP, which was evaluated at each 0.05 m up to 0.4m, during three different periods. The results suggest showed higher values of Bd and smaller values of macroporosity in the 0-0,10 m layer for NT and MT. Similar results were obtained for SRP, independently of the time of evaluation and soil water content. MT and CT may provide favorable soil physical conditions to the growth of the crop when compared to NT. Medium to long-term evaluations are necessary due to the dynamic changes in soil physical quality, result of the tillage system, soil and crop management.

  4. A comparative study of magnetic field induced meta-magnetic transition in nanocrystalline and bulk Pr{sub 0.65}(Ca{sub 0.7}Sr{sub 0.3}){sub 0.35}MnO{sub 3} compound

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Suvayan [CMP Division, Saha Institute of Nuclear Physics, 1/AF, Bidhannagar, Kolkata 700 064 (India); Center for Research in Nanoscience and Nanotechnology, University of Calcutta, JD-2, Salt Lake City, Kolkata 700098, West Bengal (India); Department of Physics, University of Calcutta, 92 A.P.C. Road, Kolkata 700009 (India); Das, Kalipada, E-mail: kalipadadasphysics@gmail.com [Department of Materials Science, Indian Association for the Cultivation of Science, 2A and 2B Raja S.C. Mullick Road, Jadavpur, Kolkata 700032 (India); Bandyopadhyay, Sudipta [Center for Research in Nanoscience and Nanotechnology, University of Calcutta, JD-2, Salt Lake City, Kolkata 700098, West Bengal (India); Department of Physics, University of Calcutta, 92 A.P.C. Road, Kolkata 700009 (India); Das, I. [CMP Division, Saha Institute of Nuclear Physics, 1/AF, Bidhannagar, Kolkata 700 064 (India)

    2017-06-15

    Highlights: • Field induced sharp meta-magnetic transition appears even in nanocrystalline sample. • Magnetic field for the meta-magnetic transition enhances depending upon the cooling field. • This unusual behavior is addressed by the effect of the interfacial strains. - Abstract: In our present study we highlight the observations of external magnetic field induced sharp meta-magnetic transition in polycrystalline bulk as well as nanocrystalline form of Pr{sub 0.65}(Ca{sub 0.7}Sr{sub 0.7}){sub 0.35}MnO{sub 3} compound. Interestingly, such behavior persists in the nanoparticles regardless of the disorder broadened transition. However, higher magnetic field is required for nanoparticles having average particle size ∼40 nm for such meta-magnetic transition, which differs from the general trends of the pure charge ordered nano materials. The interfacial strain between the different magnetic domains plays the important role in magnetic isothermal properties of nanoparticles, when the samples are cooled down in different cooling field. Additionally, both the bulk and nanoparticle compounds exhibit spontaneous phase separation and significantly large magnetoresistance at the low temperature region due to the melting of charge ordered fraction.

  5. Efeito do preenchimento e do material restaurador na resistência à fratura e distribuição de tensões de pré-molares superiores fragilizados

    OpenAIRE

    Souza, Ana Carolina de Oliveira [UNESP

    2012-01-01

    O objetivo deste trabalho foi avaliar a influência do tipo de preenchimento e material restaurador na distribuição de tensões e resistência à fratura de pré-molares superiores tratados endodonticamente e com cúspides socavadas. Foram selecionados 40 pré-molares superiores humanos hígidos, sendo que 5 foram deixados intactos como controle (Grupo C+) e o restante realizado tratamento endodôntico e socavamento das cúspides. Cinco dentes foram separados para compor o controle negativo (Grupo C-),...

  6. Captura e resistência: potências comunicacionais e políticas das práticas de intervenção urbana

    Directory of Open Access Journals (Sweden)

    Ana Karina de Carvalho Oliveira

    2014-12-01

    Full Text Available Este artigo tem como objetivo apresentar as possibilidades de resistência que as práticas comunicacionais de intervenção urbana são capazes de oferecer às tentativas do poder institucional em capturá-las, absorvê-las e integrá-las às lógicas vigentes a fim de mantê-las sob seu controle. A trajetória do grupo que transformou pilastras do metrô de São Paulo em um museu a céu aberto da arte urbana paralelamente à do grupo que pixou, consecutivamente, as Bienais de Arte de São Paulo em 2008 e 2010, e a Bienal de Berlim, em 2012, podem dar a ver algumas das questões políticas, estéticas, comunicacionais e artísticas que a atravessam, sobretudo à luz das contribuições de Certeau, Mouffe, Rancière e Agamben.

  7. Effects of interaction and disorder on polarons in colossal resistance manganite Pr0.68Ca0.32MnO3 thin films

    Science.gov (United States)

    Hoffmann, J.; Moschkau, P.; Mildner, S.; Norpoth, J.; Jooss, Ch; Wu, L.; Zhu, Y.

    2014-12-01

    The colossal magnetoresistance effect (CMR), the drop of the electric resistance by orders of magnitude in a strong magnetic field, is a fascinating property of strongly correlated electrons in doped manganites. Here, we present a detailed analysis of the magnetotransport properties of small polarons in thin films of the low bandwidth manganite Pr0.68Ca0.32MnO3 with different degrees of preparation-induced octahedral disorder. The crystal and defect structure is investigated by means of high-resolution transmission electron microscopy. We apply the small polaron theory developed by Firsov and Lang in order to study the hopping mobility in the paramagnetic phase and its changes due to the formation of the antiferromagnetic charge ordered (CO) and the ferromagnetic metallic phases. Although it represents a single particle theory, reasonable estimates of small polaron properties such as formation energy, activation energy and transfer integral are possible, if the effects of interactions and disorder are taken into account. Beyond the well-known effect of the magnetic double exchange on the transfer integral, we show that the emergence of band transport of small polarons in the CMR transition sensibly depends on the degree of octahedral disorder, the polaron-polaron interactions and the resulting long range order leading to a structural phase transition in the CO phase.

  8. Bulk oil clauses

    International Nuclear Information System (INIS)

    Gough, N.

    1993-01-01

    The Institute Bulk Oil Clauses produced by the London market and the American SP-13c Clauses are examined in detail in this article. The duration and perils covered are discussed, and exclusions, adjustment clause 15 of the Institute Bulk Oil Clauses, Institute War Clauses (Cargo), and Institute Strikes Clauses (Bulk Oil) are outlined. (UK)

  9. 19 CFR 149.4 - Bulk and break bulk cargo.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Bulk and break bulk cargo. 149.4 Section 149.4... TREASURY (CONTINUED) IMPORTER SECURITY FILING § 149.4 Bulk and break bulk cargo. (a) Bulk cargo exempted.... (b) Break bulk cargo exempted from time requirement. For break bulk cargo that is exempt from the...

  10. Application of in silico bulked segregant analysis for rapid development of markers linked to Bean common mosaic virus resistance in common bean

    Science.gov (United States)

    Common bean was one of the first crops that benefited from the development and utilization of molecular markers in tagging major disease resistance genes for marker-assisted selection (MAS). Efficiency of MAS breeding in common bean is still hampered; however, due to the dominance, linkage phase, an...

  11. Densidade crítica ao crescimento de plantas considerando água disponível e resistência à penetração de um Argissolo Vermelho distrófico arênico Bulk density critical to the growth of plants considering available water and soil resistance to penetration of a Paleudalf

    Directory of Open Access Journals (Sweden)

    Cláudia Liane Rodrigues de Lima

    2007-08-01

    Full Text Available O estabelecimento de culturas está associado a condições restritivas impostas pelo tipo e pelo manejo de solo. O objetivo deste estudo foi avaliar o intervalo de densidade crítica de um Argissolo Vermelho distrófico arênico, considerando a disponibilidade de água para as culturas e os valores restritivos de resistência à penetração (1,5; 2,0; 2,5; 3,0 e 3,5MPa. A amostragem de um Argissolo Vermelho distrófico arênico sob plantio direto desde 1989, com estrutura de solo preservada, foi feita nas camadas de 0,00 a 0,10 m e 0,10 a 0,20m. As amostras (oito repetições foram saturadas em água, equilibradas em diferentes potenciais (-0,001; -0,004; -0,006; -0,033; -0,07 e -0,1MPa e dois grupos de amostras foram secadas em laboratório, por um período de 7 e 9 dias, perfazendo um total de 128 amostras. Após atingir o equilíbrio, foi avaliada a resistência à penetração e a densidade do solo. Um incremento na resistência à penetração possibilitou maiores intervalos de densidade adequados ao desenvolvimento das plantas, i.e., quando considerada uma resistência à penetração de 2MPa, o intervalo de densidade adequado foi de 1,44Mg m-3 a 1,76Mg m-3 e, para uma resistência de 3MPa, o intervalo foi de 1,53 a 1,88Mg m-3. Valores superiores e inferiores ao intervalo de densidade obtidos são críticos ao desenvolvimento de culturas, considerando a resistência à penetração e a disponibilidade de água.Crop establishment is linked to restrictive conditions imposed by soil type and soil management. This study aimed at evaluating the interval of bulk density critical for a Paleudalf, considering water availability to the crops and restrictive values to the root resistance to penetration (1.5; 2.0; 2.5; 3.0 e 3.5MPa. Soil samples, from a Paleudalf under no-tillage since 1989, with preserved structure were collected in the layers of 0.00 to 0.10m and 0.10 to 0.20m depth. The samples (eight replicates were saturated in water and

  12. A new method for the Characterization of Strain-Specific Conformational Stability of Protease-Sensitive and Protease Resistant PrPSc

    NARCIS (Netherlands)

    Pirisinu, L.; Bari, Di M.; Marcon, S.; Vaccari, G.; Agostino, D' C.; Fazzi, P.; Esposito, E.; Cardone, F.; Langeveld, J.P.M.; Agrimi, U.; Nonno, R.

    2010-01-01

    Although proteinacious in nature, prions exist as strains with specific self-perpetuating biological properties. Prion strains are thought to be associated with different conformers of PrPSc, a disease-associated isoform of the host-encoded cellular protein (PrPC). Molecular strain typing approaches

  13. Role of Pr/Ba disorder in Pr123 superconductor

    International Nuclear Information System (INIS)

    Khosroabadi, H.; Modarreszadeh, M.; Taheri, P.; Akhavan, M.

    2004-01-01

    Polycrystalline (Pr 1-x Ba x )Ba 2 Cu 3 O 7-δ samples (0.0≤x≤0.6) is prepared by the standard solid state reaction technique. X-ray measurements confirm the formation of the 123 phase for x≤0.3, but for 0.4≤x≤0.6, due to the solubility limit, the 123 phase is not a dominant phase. Resistivity measurements show the increasing of resistivity with the increase of Ba-doping up to about x=0.08, and then decreases in the 123 phase up to x=0.3. There is no observation of superconducting state in our samples, but we observe the sharp decrease of resistivity for x>0.1, which is related to possible superconductivity in Pr123 system by Ba-doping. It is concluded that the Pr/Ba disorder has important effect in the transport electrical properties, specially occuring a superconducting state in Pr123. It is also suggested that extra Ba concentration in Pr123 system can create superconducting state such as in Ca-doped Pr123. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. The AGAAAAGA palindrome in PrP is required to generate a productive PrPSc-PrPC complex that leads to prion propagation.

    Science.gov (United States)

    Norstrom, Eric M; Mastrianni, James A

    2005-07-22

    The molecular hallmark of prion disease is the conversion of normal prion protein (PrPC) to an insoluble, proteinase K-resistant, pathogenic isoform (PrPSc). Once generated, PrPSc propagates by complexing with, and transferring its pathogenic conformation onto, PrPC. Defining the specific nature of this PrPSc-PrPC interaction is critical to understanding prion genesis. To begin to approach this question, we employed a prion-infected neuroblastoma cell line (ScN2a) combined with a heterologous yeast expression system to independently model PrPSc generation and propagation. We additionally applied fluorescence resonance energy transfer analysis to the latter to specifically study PrP-PrP interactions. In this report we focus on an N-terminal hydrophobic palindrome of PrP (112-AGAAAAGA-119) thought to feature intimately in prion generation via an unclear mechanism. We found that, in contrast to wild type (wt) PrP, PrP lacking the palindrome (PrPDelta112-119) neither converted to PrPSc when expressed in ScN2a cells nor generated proteinase K-resistant PrP when expressed in yeast. Furthermore, PrPDelta112-119 was a dominant-negative inhibitor of wtPrP in ScN2a cells. Both wtPrP and PrPDelta112-119 were highly insoluble when expressed in yeast and produced distinct cytosolic aggregates when expressed as fluorescent fusion proteins (PrP::YFP). Although self-aggregation was evident, fluorescence resonance energy transfer studies in live yeast co-expressing PrPSc-like protein and PrPDelta112-119 indicated altered interaction properties. These results suggest that the palindrome is required, not only for the attainment of the PrPSc conformation but also to facilitate the proper association of PrPSc with PrPC to effect prion propagation.

  15. Interplay of cross-plane polaronic transport and resistive switching in Pt–Pr0.67Ca0.33MnO3–Pt heterostructures

    International Nuclear Information System (INIS)

    Scherff, M; Hoffmann, J; Meyer, B; Danz, Th; Jooss, Ch

    2013-01-01

    The identification of the cross-plane electric transport mechanisms in different resistance states of metal–oxide sandwich structures is essential for gaining insights into the mechanisms of resistive switching (RS). Here, we present a systematic study of cross-plane electric transport properties of Pr 0.67 Ca 0.33 MnO 3 (PCMO) thin films sandwiched by precious Pt metal electrodes. We observe three different transport regimes: ohmic, nonlinear and RS. The nonlinear regime is associated with colossal magneto-resistance (CMR) and colossal electro-resistance (CER) effects. In contrast to RS, the CMR and CER are volatile resistance effects which persist only during application of strong magnetic or electric fields and they are restricted to low temperatures. At low current densities, the device resistance is dominated by small polaron hopping transport of the PCMO film. At higher electric current densities near the switching threshold, the interface resistance starts to dominate and remarkably also exhibits thermally activated transport properties. Our studies also shed light onto the interplay of colossal resistance effects and RS: at low temperatures, RS can be only induced by reduction of the PCMO resistivity through CMR and CER. This clearly demonstrates the key role of the current density for controlling the amplitude of non-volatile resistive changes. Conversely, the CMR can be used as a probe for the switching induced changes in disorder and correlations. At small switching amplitudes, we observe slight changes in polaron activation energy which can be attributed to changes at the interface. If the switching amplitude exceeds 1000% and more, the CMR effect in the device can be reversibly changed. This indicates persistent changes in electronic or lattice structure of large regions within the PCMO film. (paper)

  16. Suppression of structural and magnetotransport transitions in compressed Pr0.5Sr0.5MnO3 thin films resulting in colossal magnetoresistance effect

    International Nuclear Information System (INIS)

    Mercey, B.; Hervieu, M.; Prellier, W.; Wolfman, J.; Simon, C.; Raveau, B.

    2001-01-01

    Thin films of Pr 0.5 Sr 0.5 MnO 3 have been deposited on [100]-LaAlO 3 using laser ablation. In contrast to the bulk compounds, such films do not exhibit any structural and magnetotransport transitions versus temperature; more particularly the A-type antiferromagnetic phase with the Fmmm structure which exists in the bulk below T N =135K is suppressed, and the film is an insulator in the absence of a magnetic field. However a colossal magnetoresistance effect is observed, with resistance ratios much larger than in the bulk. These differences with respect to the bulk, are explained by the presence of substrate-induced strains. [copyright] 2001 American Institute of Physics

  17. Association between milking practices and psychrotrophic bacterial counts in bulk tank milk Asociación entre prácticas de ordeño y recuento de organismos psicrótrofos en leche de tanque de frío

    Directory of Open Access Journals (Sweden)

    Ana I. Molineri

    2012-09-01

    Full Text Available The objective of this work was to determine on-farm risk factors for psychrotrophic bacterial counts in bulk tank milk from dairy farms in Argentina. Raw milk samples from bulk tanks of 27 dairy farms were examined for total psychrotrophic counts (TPC, proteolytic psychrotrophic counts (PPC and lipolytic psychrotrophic counts (LPC (dependent or outcome variables. A survey recording infrastructure conditions, milking equipment and milking management (independent variables was performed. Bivariate association proofs and logistic regression analyses were used to determine association between independent variables and psychrotrophic bacterial counts. Milk cooled in plate heat exchangers or barrel tanks were 16.39 and 10.52 times more likely to yield TPC and PPC above the standard established for high quality milk compared with milk cooled in bulk tanks, respectively. Periodic cleaning of cooling tanks (3 times a week or daily was associated with lower TPC (approximately 1.5 log CFU/ml than weekly cleaning frequency and farms where milkers did not wash their hands during milking time were 7.81 times more likely to have higher PPC. No association was found between LPC and any of the independent variables. The only variable associated with TPC and PPC in a logistic regression model was the refrigeration system used on the farm. Dairy farms that possessed bulk milk cooling tanks yielded the lowest bacterial counts. Results of this study highlight the importance of both the type of cooling system used on the farm and its adequate hygienic maintenance for obtaining low pshychrotrophic counts at dairy farm.El objetivo del trabajo fue determinar los factores de riesgo para altos recuentos de organismos psicrótrofos en leche de tanques de tambos de la Argentina. Se examinaron muestras de leche cruda de tanques de frío de 27 tambos, y se realizó el recuento de organismos psicrótrofos totales (PT, de psicrótrofos proteolíticos (PP y de psicr

  18. Photoemission of heavy fermion superconductor PrOs4Sb12 and other Pr compounds

    International Nuclear Information System (INIS)

    Imada, S.; Yamasaki, A.; Sekiyama, A.; Settai, R.; Onuki, Y.; Suga, S.; Sugawara, H.; Sato, H.; Ochiai, A.

    2004-01-01

    Full text: Strongly correlated electronic states due to Pr 4f electrons found in several Pr compounds have recently been attracting much attention. The Pr 4f electrons are much more localized than in Ce due to the lanthanoid contraction. Therefore, the number of the Pr systems that show strong electron correlation is much smaller than Ce systems. We will present a comparative study of Pr 4f electronic states in such systems as the heavy fermion superconductor PrOs 4 Sb 12 , the Kondo system PrSn 3 and the localized 4f systems Pr 4 X 3 (X = Sb and Bi). The Pr 4f electronic state was probed by means of the Pr 3d → 4f resonant photoemission (RPES). Because the kinetic energy (E K ) of the photoelectrons is as high as ∼ 900 eV, this method is much more bulk sensitive than the 4d → 4f RPES with E K ∼ 100 eV. The energy resolution could be set to about 100 meV by utilizing the soft X-rays from BL25SU in SPring-8 and the SCIENTA SES-200 analyzer. The Pr 4f excitation spectrum of PrSn 3 was found to show a very strong intensity at the Fermi level (E F ). This can be interpreted as the Kondo resonance which has been observed in the Kondo Ce and Yb compounds. In the Pr 4f spectrum of the heavy fermion superconductor PrOs 4 Sb 12 , the intensity at E F was smaller than in PrSn 3 . This clearly shows that the Kondo temperature (T K ) is much lower in PrOs 4 Sb 12 than in PrSn 3 . We have further found a strong excitation energy dependence in the RPES line shape. In the case of Pr 4 X 3 (X = Sb and Bi), the intensity at E B was much smaller than PrSn 3 and PrOs 4 Sb 12 , which is consistent with the localized character of Pr 4f electrons in Pr 4 X 3 . The Pr 4f spectra of these localized systems are qualitatively well reproduced by a cluster model calculation that takes into account the hybridization between the Pr 4f orbital and the conduction and valence bands made up by the X p and Pr 5d states

  19. Arabidopsis genes, AtNPR1, AtTGA2 and AtPR-5, confer partial resistance to soybean cyst nematode (Heterodera glycines) when overexpressed in transgenic soybean roots.

    Science.gov (United States)

    Matthews, Benjamin F; Beard, Hunter; Brewer, Eric; Kabir, Sara; MacDonald, Margaret H; Youssef, Reham M

    2014-04-16

    Extensive studies using the model system Arabidopsis thaliana to elucidate plant defense signaling and pathway networks indicate that salicylic acid (SA) is the key hormone triggering the plant defense response against biotrophic and hemi-biotrophic pathogens, while jasmonic acid (JA) and derivatives are critical to the defense response against necrotrophic pathogens. Several reports demonstrate that SA limits nematode reproduction. Here we translate knowledge gained from studies using Arabidopsis to soybean. The ability of thirty-one Arabidopsis genes encoding important components of SA and JA synthesis and signaling in conferring resistance to soybean cyst nematode (SCN: Heterodera glycines) are investigated. We demonstrate that overexpression of three of thirty-one Arabidoposis genes in transgenic soybean roots of composite plants decreased the number of cysts formed by SCN to less than 50% of those found on control roots, namely AtNPR1(33%), AtTGA2 (38%), and AtPR-5 (38%). Three additional Arabidopsis genes decreased the number of SCN cysts by 40% or more: AtACBP3 (53% of the control value), AtACD2 (55%), and AtCM-3 (57%). Other genes having less or no effect included AtEDS5 (77%), AtNDR1 (82%), AtEDS1 (107%), and AtPR-1 (80%), as compared to control. Overexpression of AtDND1 greatly increased susceptibility as indicated by a large increase in the number of SCN cysts (175% of control). Knowledge of the pathogen defense system gained from studies of the model system, Arabidopsis, can be directly translated to soybean through direct overexpression of Arabidopsis genes. When the genes, AtNPR1, AtGA2, and AtPR-5, encoding specific components involved in SA regulation, synthesis, and signaling, are overexpressed in soybean roots, resistance to SCN is enhanced. This demonstrates functional compatibility of some Arabidopsis genes with soybean and identifies genes that may be used to engineer resistance to nematodes.

  20. Efeito da ciclagem mecânica em pré-molares restaurados com inlays confeccionados com diferentes materiais cerâmicos na resistência de união dentina-restauração

    OpenAIRE

    Trindade, Flávia Zardo [UNESP

    2012-01-01

    Tendo em vista os diversos materiais presentes no mercado, e que a interface adesiva é a principal responsável pela durabilidade de restaurações estéticas, é importante avaliarmos que material apresenta melhor desempenho na cavidade bucal, promovendo sucesso no emprego de restaurações estéticas. Dessa forma, esse estudo teve como objetivo avaliar a resistência de união entre cinco diferentes tipos de restaurações cerâmicas, em cavidades do tipo inlay, e o substrato dentário (pré-molares super...

  1. Influência do volume do preparo oclusal para inlays e do material restaurador na distribuição de tensão e resistência à fratura de pré-molares

    OpenAIRE

    Costa, Anna Karina Figueiredo [UNESP

    2012-01-01

    O estudo avaliou a influência da dimensão do istmo oclusal do preparo em inlays na distribuição de tensões e resistência à fratura de pré-molares superiores humanos restaurados com diferentes tipos de materiais. Foram selecionados 49 dentes hígidos e separados em 7 grupos (n=7) de acordo com o volume do preparo: conservador ou extenso e material restaurador: cerâmica ou resina, tendo como controle os grupos I (Integro - controle positivo), PC (Preparo Conservador) e PE (Preparo Extenso), ambo...

  2. Utilização de análise de segregantes agrupados na identificação de marcadores ligados a genes que controlam a resistência à ferrugem (Puccinia psidii Winter em Eucalyptus sp. Use of bulked segregant analysis in identification of molecular markers linked to resistance to rust (Puccinia psidii winter in Eucalyptus sp.

    Directory of Open Access Journals (Sweden)

    Karina Carnieli Zamprogno

    2008-09-01

    Full Text Available Devido a grande importância da cultura de Eucalyptus no Brasil, empresas do setor florestal têm buscado através de programas de melhoramento genético, reduzir as perdas de produção e atender a demanda do mercado de papel e celulose. Um exemplo, é a busca por genes de resistência a doenças, principalmente a ferrugem causada por Puccinia psidii Winter, que resulta em redução da produtividade em plantas altamente suscetíveis. No presente trabalho, mudas de Eucalyptus pertencentes a uma geração F1, provenientes do cruzamento controlado entre parentais híbridos E. grandis X E. urophylla, sendo eles resistente e suscetível, foram inoculadas com Puccinia psidii em casa de vegetação e acompanhadas até o aparecimento dos sintomas da ferrugem. Foram classificadas, em dois grupos: resistentes (ausência de sintomas e suscetíveis (presença de sintomas e esporulação. As amostras de DNA foram comparadas com o uso de marcadores moleculares associado ao método de BSA (Bulked Segregant Analysis. O polimorfismo entre os grupos foi geneticamente relacionado ao loco que determina a característica de resistência ou sucetibilidade. Dentre os 720 "primers" testados, 19 foram polimórficos, porém, apenas o marcador AK 01 manteve-se presente, quando testado em todos os indivíduos da população, mostrando-se a uma distância genética estimada de 20 cM em repulsão ao gene de resistência.Due to the great importance of the Eucalyptus crop in Brazil, companies in the forest sector have aimed, through genetic breeding programs, to reduce yield losses and meet the demands of the paper and cellulosis market. One example is the search for genes for resistance to diseases, especially the rust caused by Puccinia psidii Winter, which results in reduced productivity in highly susceptible plants. On the present study, seedlings of Eucalyptus from an F1 generation, bred from controlled crossing between parents C0 (resistant and VR (susceptible, were

  3. Colossal anisotropic resistivity and oriented magnetic domains in strained La{sub 0.325}Pr{sub 0.3}Ca{sub 0.375}MnO{sub 3} films

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Tao; Yang, Shengwei; Liu, Yukuai; Zhao, Wenbo; Feng, Lei; Li, Xiaoguang, E-mail: lixg@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Microscale, Department of Physics, University of Science and Technology of China, Hefei 230026 (China); Zhou, Haibiao; Lu, Qingyou [Hefei National Laboratory for Physical Sciences at Microscale, Department of Physics, University of Science and Technology of China, Hefei 230026 (China); High Magnetic Field Laboratory, Chinese Academy of Sciences and University of Science and Technology of China, Hefei 230031 (China); Hou, Yubin [High Magnetic Field Laboratory, Chinese Academy of Sciences and University of Science and Technology of China, Hefei 230031 (China)

    2014-05-19

    Magnetic and resistive anisotropies have been studied for the La{sub 0.325}Pr{sub 0.3}Ca{sub 0.375}MnO{sub 3} films with different thicknesses grown on low symmetric (011)-oriented (LaAlO{sub 3}){sub 0.3}(SrAl{sub 0.5}Ta{sub 0.5}O{sub 3}){sub 0.7} substrates. In the magnetic and electronic phase separation region, a colossal anisotropic resistivity (AR) of ∼10{sup 5}% and an anomalous large anisotropic magnetoresistance can be observed for 30 nm film. However, for 120 nm film, the maximum AR decreases significantly (∼2 × 10{sup 3}%) due to strain relaxation. The colossal AR is strongly associated with the oriented formation of magnetic domains, and the features of the strain effects are believed to be useful for the design of artificial materials and devices.

  4. On solid bulk liquefaction

    OpenAIRE

    Fkhir, Moustafa

    2016-01-01

    Solid bulk cargoes, such as nickel ore and iron ore, have a tendency to liquefy. Such goods can transform from hard to liquid state very rapidly leaving no time for the master or crew to do anything but face their imminent fate. The liquefaction of solid bulk cargoes has claimed many seafarers’ lives and dozens of ships. The moisture content present in these cargoes can be dramatically increased to unsafe limits by the mere reason of the vessel’s rolling on waves. In response to the alarming ...

  5. Synthesis of Bulk Superconducting Magnesium Diboride

    Directory of Open Access Journals (Sweden)

    Margie Olbinado

    2002-06-01

    Full Text Available Bulk polycrystalline superconducting magnesium diboride, MgB2, samples were successfully prepared via a one-step sintering program at 750°C, in pre Argon with a pressure of 1atm. Both electrical resistivity and magnetic susceptibility measurements confirmed the superconductivity of the material at 39K, with a transition width of 5K. The polycrystalline nature, granular morphology, and composition of the sintered bulk material were confirmed using X-ray diffractometry (XRD, scanning electron microscopy (SEM, and energy dispersive X-ray analysis (EDX.

  6. Influência da pré-saturação do agregado miúdo reciclado na viscosidade e resistência à compressão de argamassas

    Directory of Open Access Journals (Sweden)

    Juliana Oliveira Malta

    Full Text Available Os diferentes tratamentos dados aos agregados reciclados influenciam nas propriedades das argamassas nos estados fresco e endurecido. Como esses agregados possuem características diferentes das dos agregados naturais, tais como elevada absorção, forma lamelar, textura áspera e menor massa específica, há necessidade de estudar os diferentes procedimentos empregados na dosagem de misturas contendo esses resíduos e a influência deles no comportamento físico e mecânico das argamassas. Dois procedimentos foram utilizados no presente estudo: compensação de parte da água absorvida pelos agregados miúdos reciclados (AMR, fazendo-se sua pré-saturação, e uso dos agregados secos em estufa. Este trabalho tem como objetivo principal avaliar a influência desses procedimentos de dosagem nas propriedades reológicas, teor de água quimicamente combinada e resistência à compressão de argamassas contendo 25% e 50% de agregados reciclados em substituição (em massa aos agregados naturais. Os resultados mostram que a pré-saturação influencia as propriedades das argamassas no estado fresco e endurecido. A presença do AMR promove misturas com maior viscosidade, maior teor de água livre e menor resistência à compressão.

  7. Calcium-induced cation ordering and large resistivity decrease in Pr.sub.0.3./sub.CoO.sub.2./sub.

    Czech Academy of Sciences Publication Activity Database

    Brázda, Petr; Palatinus, Lukáš; Drahokoupil, Jan; Knížek, Karel; Buršík, Josef

    2016-01-01

    Roč. 96-97, Sep (2016), s. 10-16 ISSN 0022-3697 R&D Projects: GA ČR GA13-03708S Institutional support: RVO:68378271 ; RVO:61388980 Keywords : thermoelectric cobalt ate * Pr x CoO 2 * electron diffraction tomography * powder X-ray diffraction * cobalt oxide Subject RIV: BM - Solid Matter Physics ; Magnetism; CA - Inorganic Chemistry (UACH-T) Impact factor: 2.059, year: 2016

  8. "Understanding" cosmological bulk viscosity

    OpenAIRE

    Zimdahl, Winfried

    1996-01-01

    A universe consisting of two interacting perfect fluids with the same 4-velocity is considered. A heuristic mean free time argument is used to show that the system as a whole cannot be perfect as well but neccessarily implies a nonvanishing bulk viscosity. A new formula for the latter is derived and compared with corresponding results of radiative hydrodynamics.

  9. The Structure of PrPSc Prions

    Directory of Open Access Journals (Sweden)

    Holger Wille

    2018-02-01

    Full Text Available PrPSc (scrapie isoform of the prion protein prions are the infectious agent behind diseases such as Creutzfeldt–Jakob disease in humans, bovine spongiform encephalopathy in cattle, chronic wasting disease in cervids (deer, elk, moose, and reindeer, as well as goat and sheep scrapie. PrPSc is an alternatively folded variant of the cellular prion protein, PrPC, which is a regular, GPI-anchored protein that is present on the cell surface of neurons and other cell types. While the structure of PrPC is well studied, the structure of PrPSc resisted high-resolution determination due to its general insolubility and propensity to aggregate. Cryo-electron microscopy, X-ray fiber diffraction, and a variety of other approaches defined the structure of PrPSc as a four-rung β-solenoid. A high-resolution structure of PrPSc still remains to be solved, but the four-rung β-solenoid architecture provides a molecular framework for the autocatalytic propagation mechanism that gives rise to the alternative conformation of PrPSc. Here, we summarize the current knowledge regarding the structure of PrPSc and speculate about the molecular conversion mechanisms that leads from PrPC to PrPSc.

  10. The Structure of PrPScPrions.

    Science.gov (United States)

    Wille, Holger; Requena, Jesús R

    2018-02-07

    PrP Sc (scrapie isoform of the prion protein) prions are the infectious agent behind diseases such as Creutzfeldt-Jakob disease in humans, bovine spongiform encephalopathy in cattle, chronic wasting disease in cervids (deer, elk, moose, and reindeer), as well as goat and sheep scrapie. PrP Sc is an alternatively folded variant of the cellular prion protein, PrP C , which is a regular, GPI-anchored protein that is present on the cell surface of neurons and other cell types. While the structure of PrP C is well studied, the structure of PrP Sc resisted high-resolution determination due to its general insolubility and propensity to aggregate. Cryo-electron microscopy, X-ray fiber diffraction, and a variety of other approaches defined the structure of PrP Sc as a four-rung β-solenoid. A high-resolution structure of PrP Sc still remains to be solved, but the four-rung β-solenoid architecture provides a molecular framework for the autocatalytic propagation mechanism that gives rise to the alternative conformation of PrP Sc . Here, we summarize the current knowledge regarding the structure of PrP Sc and speculate about the molecular conversion mechanisms that leads from PrP C to PrP Sc .

  11. Micromegas in a bulk

    International Nuclear Information System (INIS)

    Giomataris, I.; De Oliveira, R.; Andriamonje, S.; Aune, S.; Charpak, G.; Colas, P.; Fanourakis, G.; Ferrer, E.; Giganon, A.; Rebourgeard, Ph.; Salin, P.

    2006-01-01

    In this paper, we present a novel way to manufacture the bulk Micromegas detector. A simple process based on the Printed Circuit Board (PCB) technology is employed to produce the entire sensitive detector. Such a fabrication process could be extended to very large area detectors made by the industry. The low cost fabrication together with the robustness of the electrode materials will make it attractive for several applications ranging from particle physics and astrophysics to medicine

  12. Arabidopsis genes, AtNPR1, AtTGA2 and AtPR-5, confer partial resistance to soybean cyst nematode (Heterodera glycines) when overexpressed in transgenic soybean roots

    Science.gov (United States)

    2014-01-01

    Background Extensive studies using the model system Arabidopsis thaliana to elucidate plant defense signaling and pathway networks indicate that salicylic acid (SA) is the key hormone triggering the plant defense response against biotrophic and hemi-biotrophic pathogens, while jasmonic acid (JA) and derivatives are critical to the defense response against necrotrophic pathogens. Several reports demonstrate that SA limits nematode reproduction. Results Here we translate knowledge gained from studies using Arabidopsis to soybean. The ability of thirty-one Arabidopsis genes encoding important components of SA and JA synthesis and signaling in conferring resistance to soybean cyst nematode (SCN: Heterodera glycines) are investigated. We demonstrate that overexpression of three of thirty-one Arabidoposis genes in transgenic soybean roots of composite plants decreased the number of cysts formed by SCN to less than 50% of those found on control roots, namely AtNPR1(33%), AtTGA2 (38%), and AtPR-5 (38%). Three additional Arabidopsis genes decreased the number of SCN cysts by 40% or more: AtACBP3 (53% of the control value), AtACD2 (55%), and AtCM-3 (57%). Other genes having less or no effect included AtEDS5 (77%), AtNDR1 (82%), AtEDS1 (107%), and AtPR-1 (80%), as compared to control. Overexpression of AtDND1 greatly increased susceptibility as indicated by a large increase in the number of SCN cysts (175% of control). Conclusions Knowledge of the pathogen defense system gained from studies of the model system, Arabidopsis, can be directly translated to soybean through direct overexpression of Arabidopsis genes. When the genes, AtNPR1, AtGA2, and AtPR-5, encoding specific components involved in SA regulation, synthesis, and signaling, are overexpressed in soybean roots, resistance to SCN is enhanced. This demonstrates functional compatibility of some Arabidopsis genes with soybean and identifies genes that may be used to engineer resistance to nematodes. PMID:24739302

  13. Diffusion or bulk flow

    DEFF Research Database (Denmark)

    Schulz, Alexander

    2015-01-01

    assimilate movement includes an apoplasmic step, this mode is called apoplasmic loading. Well established is also the polymer-trap loading mode, where the phloem-transport sugars are raffinose-family oligomers in herbaceous plants. Also this mode depends on the investment of energy, here for sugar...... is currently matter of discussion, called passive symplasmic loading. Based on the limited material available, this review compares the different loading modes and suggests that diffusion is the driving force in apoplasmic loaders, while bulk flow plays an increasing role in plants having a continuous...

  14. A Synthetic HIV-1 Subtype C Backbone Generates Comparable PR and RT Resistance Profiles to a Subtype B Backbone in a Recombinant Virus Assay

    OpenAIRE

    Nauwelaers, David; Van Houtte, Margriet; Winters, Bart; Steegen, Kim; Van Baelen, Kurt; Chi, Ellen; Zhou, Mimi; Steiner, Derek; Bonesteel, Rachelle; Aston, Colin; Stuyver, Lieven J.

    2011-01-01

    In order to determine phenotypic protease and reverse transcriptase inhibitor-associated resistance in HIV subtype C virus, we have synthetically constructed an HIV-1 subtype C (HIV-1-C) viral backbone for use in a recombinant virus assay. The in silico designed viral genome was divided into 4 fragments, which were chemically synthesized and joined together by conventional subcloning. Subsequently, gag-protease-reverse-transcriptase (GPRT) fragments from 8 HIV-1 subtype C-infected patient sam...

  15. Bulk-Fill Resin Composites

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Havndrup-Pedersen, Cæcilie; Honoré, Daniel

    2015-01-01

    the restorative procedure. The aim of this study, therefore, was to compare the depth of cure, polymerization contraction, and gap formation in bulk-fill resin composites with those of a conventional resin composite. To achieve this, the depth of cure was assessed in accordance with the International Organization...... for Standardization 4049 standard, and the polymerization contraction was determined using the bonded-disc method. The gap formation was measured at the dentin margin of Class II cavities. Five bulk-fill resin composites were investigated: two high-viscosity (Tetric EvoCeram Bulk Fill, SonicFill) and three low......-viscosity (x-tra base, Venus Bulk Fill, SDR) materials. Compared with the conventional resin composite, the high-viscosity bulk-fill materials exhibited only a small increase (but significant for Tetric EvoCeram Bulk Fill) in depth of cure and polymerization contraction, whereas the low-viscosity bulk...

  16. A Synthetic HIV-1 Subtype C Backbone Generates Comparable PR and RT Resistance Profiles to a Subtype B Backbone in a Recombinant Virus Assay

    Science.gov (United States)

    Nauwelaers, David; Van Houtte, Margriet; Winters, Bart; Steegen, Kim; Van Baelen, Kurt; Chi, Ellen; Zhou, Mimi; Steiner, Derek; Bonesteel, Rachelle; Aston, Colin; Stuyver, Lieven J.

    2011-01-01

    In order to determine phenotypic protease and reverse transcriptase inhibitor-associated resistance in HIV subtype C virus, we have synthetically constructed an HIV-1 subtype C (HIV-1-C) viral backbone for use in a recombinant virus assay. The in silico designed viral genome was divided into 4 fragments, which were chemically synthesized and joined together by conventional subcloning. Subsequently, gag-protease-reverse-transcriptase (GPRT) fragments from 8 HIV-1 subtype C-infected patient samples were RT-PCR-amplified and cloned into the HIV-1-C backbone (deleted for GPRT) using In-Fusion reagents. Recombinant viruses (1 to 5 per patient sample) were produced in MT4-eGFP cells where cyto-pathogenic effect (CPE), p24 and Viral Load (VL) were monitored. The resulting HIV-1-C recombinant virus stocks (RVS) were added to MT4-eGFP cells in the presence of serial dilutions of antiretroviral drugs (PI, NNRTI, NRTI) to determine the fold-change in IC50 compared to the IC50 of wild-type HIV-1 virus. Additionally, viral RNA was extracted from the HIV-1-C RVS and the amplified GPRT products were used to generate recombinant virus in a subtype B backbone. Phenotypic resistance profiles in a subtype B and subtype C backbone were compared. The following observations were made: i) functional, infectious HIV-1 subtype C viruses were generated, confirmed by VL and p24 measurements; ii) their rate of infection was slower than viruses generated in the subtype B backbone; iii) they did not produce clear CPE in MT4 cells; and iv) drug resistance profiles generated in both backbones were very similar, including re-sensitizing effects like M184V on AZT. PMID:21629677

  17. A synthetic HIV-1 subtype C backbone generates comparable PR and RT resistance profiles to a subtype B backbone in a recombinant virus assay.

    Directory of Open Access Journals (Sweden)

    David Nauwelaers

    Full Text Available In order to determine phenotypic protease and reverse transcriptase inhibitor-associated resistance in HIV subtype C virus, we have synthetically constructed an HIV-1 subtype C (HIV-1-C viral backbone for use in a recombinant virus assay. The in silico designed viral genome was divided into 4 fragments, which were chemically synthesized and joined together by conventional subcloning. Subsequently, gag-protease-reverse-transcriptase (GPRT fragments from 8 HIV-1 subtype C-infected patient samples were RT-PCR-amplified and cloned into the HIV-1-C backbone (deleted for GPRT using In-Fusion reagents. Recombinant viruses (1 to 5 per patient sample were produced in MT4-eGFP cells where cyto-pathogenic effect (CPE, p24 and Viral Load (VL were monitored. The resulting HIV-1-C recombinant virus stocks (RVS were added to MT4-eGFP cells in the presence of serial dilutions of antiretroviral drugs (PI, NNRTI, NRTI to determine the fold-change in IC50 compared to the IC50 of wild-type HIV-1 virus. Additionally, viral RNA was extracted from the HIV-1-C RVS and the amplified GPRT products were used to generate recombinant virus in a subtype B backbone. Phenotypic resistance profiles in a subtype B and subtype C backbone were compared. The following observations were made: i functional, infectious HIV-1 subtype C viruses were generated, confirmed by VL and p24 measurements; ii their rate of infection was slower than viruses generated in the subtype B backbone; iii they did not produce clear CPE in MT4 cells; and iv drug resistance profiles generated in both backbones were very similar, including re-sensitizing effects like M184V on AZT.

  18. A synthetic HIV-1 subtype C backbone generates comparable PR and RT resistance profiles to a subtype B backbone in a recombinant virus assay.

    Science.gov (United States)

    Nauwelaers, David; Van Houtte, Margriet; Winters, Bart; Steegen, Kim; Van Baelen, Kurt; Chi, Ellen; Zhou, Mimi; Steiner, Derek; Bonesteel, Rachelle; Aston, Colin; Stuyver, Lieven J

    2011-01-01

    In order to determine phenotypic protease and reverse transcriptase inhibitor-associated resistance in HIV subtype C virus, we have synthetically constructed an HIV-1 subtype C (HIV-1-C) viral backbone for use in a recombinant virus assay. The in silico designed viral genome was divided into 4 fragments, which were chemically synthesized and joined together by conventional subcloning. Subsequently, gag-protease-reverse-transcriptase (GPRT) fragments from 8 HIV-1 subtype C-infected patient samples were RT-PCR-amplified and cloned into the HIV-1-C backbone (deleted for GPRT) using In-Fusion reagents. Recombinant viruses (1 to 5 per patient sample) were produced in MT4-eGFP cells where cyto-pathogenic effect (CPE), p24 and Viral Load (VL) were monitored. The resulting HIV-1-C recombinant virus stocks (RVS) were added to MT4-eGFP cells in the presence of serial dilutions of antiretroviral drugs (PI, NNRTI, NRTI) to determine the fold-change in IC50 compared to the IC50 of wild-type HIV-1 virus. Additionally, viral RNA was extracted from the HIV-1-C RVS and the amplified GPRT products were used to generate recombinant virus in a subtype B backbone. Phenotypic resistance profiles in a subtype B and subtype C backbone were compared. The following observations were made: i) functional, infectious HIV-1 subtype C viruses were generated, confirmed by VL and p24 measurements; ii) their rate of infection was slower than viruses generated in the subtype B backbone; iii) they did not produce clear CPE in MT4 cells; and iv) drug resistance profiles generated in both backbones were very similar, including re-sensitizing effects like M184V on AZT.

  19. Cuando nos quedamos solos: Resistir en la incertidumbre Prácticas de emancipación y autonomía When we stay alone: Resist in uncertainty. Emancipation and empowerment practices

    Directory of Open Access Journals (Sweden)

    Ester Jordana Lluch

    2013-03-01

    Full Text Available

    Ante la incertidumbre que nos rodea se plantea la necesidad de resistir en la universidad sin ningún diagnóstico del presente. Sin embargo, podemos partir de las críticas a dos de los rasgos de la universidad moderna que la han caracterizado: autonomía y emancipación. Trataremos de vislumbrar qué prácticas de resistencia puedan tener lugar aquí y ahora, reelaborando críticamente ambos principios a partir de las reflexiones de Jacques Rancière y Michel Foucault.

     

    In view of the uncertainty that surrounds us, there appears the need to resist in the university without any diagnosis of the present. For it, we can depart from the critiques to two of the features that have been characterized the modern university: autonomy and emancipation. We will to try to glimpse what practices of resistance could take place here and now, re-elaborating critically both principles using the reflections of Jacques Rancière and Michel Foucault.

     

  20. Bulk material handling system

    Science.gov (United States)

    Kleysteuber, William K.; Mayercheck, William D.

    1979-01-01

    This disclosure relates to a bulk material handling system particularly adapted for underground mining and includes a monorail supported overhead and carrying a plurality of conveyors each having input and output end portions with the output end portion of a first of the conveyors positioned above an input end portion of a second of the conveyors, a device for imparting motion to the conveyors to move the material from the input end portions toward the output end portions thereof, a device for supporting at least one of the input and output end portions of the first and second conveyors from the monorail, and the supporting device including a plurality of trolleys rollingly supported by the monorail whereby the conveyors can be readily moved therealong.

  1. Bulk muscles, loose cables.

    Science.gov (United States)

    Liyanage, Chamari R D G; Kodali, Venkata

    2014-10-17

    The accessibility and usage of body building supplements is on the rise with stronger internet marketing strategies by the industry. The dangers posed by the ingredients in them are underestimated. A healthy young man came to the emergency room with palpitations and feeling unwell. Initial history and clinical examination were non-contributory to find the cause. ECG showed atrial fibrillation. A detailed history for any over the counter or herbal medicine use confirmed that he was taking supplements to bulk muscle. One of the components in these supplements is yohimbine; the onset of symptoms coincided with the ingestion of this product and the patient is symptom free after stopping it. This report highlights the dangers to the public of consuming over the counter products with unknown ingredients and the consequential detrimental impact on health. 2014 BMJ Publishing Group Ltd.

  2. Modelling of soil penetration resistance for an oxisol under no-tillage

    Directory of Open Access Journals (Sweden)

    João Tavares Filho

    2012-02-01

    Full Text Available Soil penetration resistance is an important property that affects root growth and elongation and water movement in the soil. Since no-till systems tend to increase organic matter in the soil, the purpose of this study was to evaluate the efficiency with which soil penetration resistance is estimated using a proposed model based on moisture content, density and organic matter content in an Oxisol containing 665, 221 and 114 g kg-1 of clay, silt and sand respectively under annual no-till cropping, located in Londrina, Paraná State, Brazil. Penetration resistance was evaluated at random locations continually from May 2008 to February 2011, using an impact penetrometer to obtain a total of 960 replications. For the measurements, soil was sampled at depths of 0 to 20 cm to determine gravimetric moisture (G, bulk density (D and organic matter content (M. The penetration resistance curve (PR was adjusted using two non-linear models (PR = a Db Gc and PR' = a Db Gc Md, where a, b, c and d are coefficients of the adjusted model. It was found that the model that included M was the most efficient for estimating PR, explaining 91 % of PR variability, compared to 82 % of the other model.

  3. MODELING OF SOIL LOAD-BEARING CAPACITY AS A FUNCTION OF SOIL MECHANICAL RESISTANCE TO PENETRATION

    Directory of Open Access Journals (Sweden)

    Cícero Ortigara

    2015-08-01

    Full Text Available Estimation of soil load-bearing capacity from mathematical models that relate preconsolidation pressure (σp to mechanical resistance to penetration (PR and gravimetric soil water content (U is important for defining strategies to prevent compaction of agricultural soils. Our objective was therefore to model the σp and compression index (CI according to the PR (with an impact penetrometer in the field and a static penetrometer inserted at a constant rate in the laboratory and U in a Rhodic Eutrudox. The experiment consisted of six treatments: no-tillage system (NT; NT with chiseling; and NT with additional compaction by combine traffic (passing 4, 8, 10, and 20 times. Soil bulk density, total porosity, PR (in field and laboratory measurements, U, σp, and CI values were determined in the 5.5-10.5 cm and 13.5-18.5 cm layers. Preconsolidation pressure (σp and CI were modeled according to PR in different U. The σp increased and the CI decreased linearly with increases in the PR values. The correlations between σp and PR and PR and CI are influenced by U. From these correlations, the soil load-bearing capacity and compaction susceptibility can be estimated by PR readings evaluated in different U.

  4. Microfabricated Bulk Piezoelectric Transformers

    Science.gov (United States)

    Barham, Oliver M.

    Piezoelectric voltage transformers (PTs) can be used to transform an input voltage into a different, required output voltage needed in electronic and electro- mechanical systems, among other varied uses. On the macro scale, they have been commercialized in electronics powering consumer laptop liquid crystal displays, and compete with an older, more prevalent technology, inductive electromagnetic volt- age transformers (EMTs). The present work investigates PTs on smaller size scales that are currently in the academic research sphere, with an eye towards applications including micro-robotics and other small-scale electronic and electromechanical sys- tems. PTs and EMTs are compared on the basis of power and energy density, with PTs trending towards higher values of power and energy density, comparatively, indicating their suitability for small-scale systems. Among PT topologies, bulk disc-type PTs, operating in their fundamental radial extension mode, and free-free beam PTs, operating in their fundamental length extensional mode, are good can- didates for microfabrication and are considered here. Analytical modeling based on the Extended Hamilton Method is used to predict device performance and integrate mechanical tethering as a boundary condition. This model differs from previous PT models in that the electric enthalpy is used to derive constituent equations of motion with Hamilton's Method, and therefore this approach is also more generally applica- ble to other piezoelectric systems outside of the present work. Prototype devices are microfabricated using a two mask process consisting of traditional photolithography combined with micropowder blasting, and are tested with various output electri- cal loads. 4mm diameter tethered disc PTs on the order of .002cm. 3 , two orders smaller than the bulk PT literature, had the followingperformance: a prototype with electrode area ratio (input area / output area) = 1 had peak gain of 2.3 (+/- 0.1), efficiency of 33 (+/- 0

  5. Developing bulk exchange spring magnets

    Science.gov (United States)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  6. Influência da técnica restauradora na distribuição de tensões, resistência à fratura e deformação de cúspides de pré-molares tratados endodonticamente

    OpenAIRE

    Soares, Paulo Vinicius

    2006-01-01

    Este trabalho teve por objetivo avaliar a resistência à fratura, deformação de cúspide e distribuição de tensões de pré-molares superiores humanos tratados endodonticamente, com preparos cavitários para restaurações diretas e indiretas restaurados com amálgama, resina composta, resina laboratorial e cerâmica, e ainda correlacionar os resultados destas três metodologias. Foram selecionados 70 pré-molares superiores humanos hígidos com dimensões semelhantes, que foram inserido...

  7. Down-regulation of osmotin (PR5) gene by virus-induced gene silencing (VIGS) leads to susceptibility of resistant Piper colubrinum Link. to the oomycete pathogen Phytophthora capsici Leonian.

    Science.gov (United States)

    Anu, K; Jessymol, K K; Chidambareswaren, M; Gayathri, G S; Manjula, S

    2015-06-01

    Piper colubrinum Link., a distant relative of Piper nigrum L., is immune to the oomycete pathogen Phytophthora capsici Leonian that causes 'quick wilt' in cultivated black pepper (P. nigrum). The osmotin, PR5 gene homologue, earlier identified from P. colubrinum, showed significant overexpression in response to pathogen and defense signalling molecules. The present study focuses on the functional validation of P. colubrinum osmotin (PcOSM) by virus induced gene silencing (VIGS) using Tobacco Rattle Virus (TRV)-based vector. P. colubrinum plants maintained under controlled growth conditions in a growth chamber were infiltrated with Agrobacterium carrying TRV empty vector (control) and TRV vector carrying PcOSM. Three weeks post infiltration, viral movement was confirmed in newly emerged leaves of infiltrated plants by RT-PCR using TRV RNA1 and TRV RNA2 primers. Semi-quantitative RT-PCR confirmed significant down-regulation of PcOSM gene in TRV-PcOSM infiltrated plant compared with the control plants. The control and silenced plants were challenged with Phytophthora capsici which demonstrated that knock-down of PcOSM in P. colubrinum leads to increased fungal mycelial growth in silenced plants compared to control plants, which was accompanied by decreased accumulation of H2O2 as indicated by 3,3'-diaminobenzidine (DAB) staining. Thus, in this study, we demonstrated that Piper colubrinum osmotin gene is required for resisting P. capsici infection and has possible role in hypersensitive cell death response and oxidative burst signaling during infection.

  8. Recombinant PrPSc shares structural features with brain-derived PrPSc: Insights from limited proteolysis.

    Science.gov (United States)

    Sevillano, Alejandro M; Fernández-Borges, Natalia; Younas, Neelam; Wang, Fei; R Elezgarai, Saioa; Bravo, Susana; Vázquez-Fernández, Ester; Rosa, Isaac; Eraña, Hasier; Gil, David; Veiga, Sonia; Vidal, Enric; Erickson-Beltran, Melissa L; Guitián, Esteban; Silva, Christopher J; Nonno, Romolo; Ma, Jiyan; Castilla, Joaquín; R Requena, Jesús

    2018-01-01

    Very solid evidence suggests that the core of full length PrPSc is a 4-rung β-solenoid, and that individual PrPSc subunits stack to form amyloid fibers. We recently used limited proteolysis to map the β-strands and connecting loops that make up the PrPSc solenoid. Using high resolution SDS-PAGE followed by epitope analysis, and mass spectrometry, we identified positions ~116/118, 133-134, 141, 152-153, 162, 169 and 179 (murine numbering) as Proteinase K (PK) cleavage sites in PrPSc. Such sites likely define loops and/or borders of β-strands, helping us to predict the threading of the β-solenoid. We have now extended this approach to recombinant PrPSc (recPrPSc). The term recPrPSc refers to bona fide recombinant prions prepared by PMCA, exhibiting infectivity with attack rates of ~100%. Limited proteolysis of mouse and bank vole recPrPSc species yielded N-terminally truncated PK-resistant fragments similar to those seen in brain-derived PrPSc, albeit with varying relative yields. Along with these fragments, doubly N- and C-terminally truncated fragments, in particular ~89/97-152, were detected in some recPrPSc preparations; similar fragments are characteristic of atypical strains of brain-derived PrPSc. Our results suggest a shared architecture of recPrPSc and brain PrPSc prions. The observed differences, in particular the distinct yields of specific PK-resistant fragments, are likely due to differences in threading which result in the specific biochemical characteristics of recPrPSc. Furthermore, recombinant PrPSc offers exciting opportunities for structural studies unachievable with brain-derived PrPSc.

  9. Manejo de Conyza bonariensis resistente ao glyphosate: coberturas de inverno e herbicidas em pré-semeadura da soja Management of glyphosate resistant Conyza bonariensis: winter cover crops and herbicides in soybean pre-seeding

    Directory of Open Access Journals (Sweden)

    F.P. Lamego

    2013-06-01

    Full Text Available Conyza bonariensis tornou-se a principal planta daninha da cultura da soja no Sul do Brasil, em decorrência da evolução para resistência ao herbicida glyphosate. O objetivo deste trabalho foi avaliar o efeito de diferentes coberturas de inverno e da associação de manejo de dessecação pré-semeadura da soja, visando ao controle de C. bonariensis resistente ao glyphosate. Um experimento foi conduzido em campo, na safra 2010/2011. Os tratamentos foram conduzidos em esquema de parcelas subdivididas, em que as coberturas de inverno foram alocadas nas parcelas principais: aveia-preta, nabo, ervilhaca, azevém, trigo e pousio. Nas subparcelas, foram alocados os tratamentos de manejo de dessecação pré-semeadura da soja: glyphosate (720 g e.a ha-1, glyphosate (720 g e.a ha-1 + 2,4-D (1.050 g e.a ha-1, glyphosate (720 g e.a ha-1 + 2,4-D (1.050 g e.a ha-1/paraquat (200 g i.a ha-1 + diuron (100 g i.a ha-1, glyphosate (720 g e.a ha-1 + chlorimuron-ethyl (80 g i.a ha-1, glyphosate (720 g e.a ha-1 + chlorimuron-ethyl (80 g i.a ha-1/paraquat (200 g i.a ha-1 + diuron (100 g i.a ha‑1 e roçada. O nabo foi a espécie de cobertura que produziu o maior volume de massa seca durante o inverno, enquanto a ervilhaca foi a que apresentou maior efeito supressor sobre a germinação e o desenvolvimento inicial de C. bonariensis. Associações de glyphosate com 2,4-D ou chlorimuron-ethyl, seguidas da aplicação sequencial de paraquat + diuron, causaram maior redução na infestação de C. bonariensis.Conyza bonariensis became the main weed in soybean crop in Southern Brazil, as a consequence of the evolution of resistance to the herbicide glyphosate. The objective of this work was to evaluate the effect of different winter cover crops and the association of burn-down herbicides on the control of glyphosate-resistant C. bonariensis. A field experiment was conducted in the 2010/2011 season. The treatments were arranged in a split-plot scheme, with the winter

  10. Híbridos pré-comerciais resistentes a Tuta absoluta obtidos de linhagem de tomateiro rica em acilaçúcares Pre-commercial hybrids obtained from an acylsugar-rich tomato inbred line, resistant to Tuta absoluta

    Directory of Open Access Journals (Sweden)

    Gabriel M Maciel

    2011-06-01

    Full Text Available O trabalho foi realizado com o objetivo de avaliar o potencial agronômico de híbridos de tomateiro a partir da linhagem TOM-687, rica em acilaçúcares e de resistência comprovada a pragas. O experimento foi instalado na HortiAgro, município de Ijaci, MG. Foi constituído de 30 genótipos (5 híbridos comerciais, 1 linhagem pré-comercial (TOM-687, e 24 híbridos nos quais TOM-687 foi utilizada como um dos pais, os quais foram conduzidos em tutoramento com haste dupla, no espaçamento de 1,30 x 0,50 m, totalizando 15.385 plantas por hectare. Foram realizadas nove colheitas, entre as datas de 01/11/08 a 28/11/08. Foram avaliadas as características de massa média por fruto (g fruto-1 e produção por hectare (t ha-1. Os 24 híbridos que tiveram TOM-687 como um dos pais apresentaram potencial produtivo similar ao das testemunhas comerciais Débora Max, Bravo, Bônus, Kombat e Atyna. Dos 24 híbridos experimentais, quatro (TEX-298, TEX-310, TEX-315 e TEX-316 foram avaliados quanto à resistência à traça-do-tomateiro (Tuta absoluta e mostraram-se mais resistentes do que as testemunhas comerciais.This experiment was designed to assess the agronomic potential of tomato hybrids obtained from the tomato line TOM-687, an acylsugar-rich line with confirmed resistance to an array of tomato pests. The experiment was carried out at the HortiAgro Sementes research station, in Ijaci, Minas Gerais State, Brazil. The treatments comprised 30 genotypes (5 commercial hybrid checks, 1 high acylsugar line (TOM-687, and 24 hybrids in which TOM-687 was one of the parents. Plants were trained to two stems, in a spacing of 1.30 m between rows x 0.50 m between plants within a row, totaling 15,385 plants per hectare. Nine harvests were performed between November 1st, 2008 and November 28th,2008. Traits assessed were mean fruit weight (g fruit-1 and total yield (t ha-1. All 24 hybrids with TOM-687 as a parent showed yields similar to those of the commercial check

  11. Soft Ferromagnetic Bulk Metallic Glasses with Enhanced Mechanical Properties

    OpenAIRE

    Ramasamy, Parthiban

    2018-01-01

    Fe-based bulk metallic glasses (BMGs) have gained considerable interest due to their excellent soft magnetic properties with high saturation magnetization, high electrical resistivity, very good corrosion resistance, low materials cost, extremely high mechanical strength and hardness. In spite of having excellent strength, Fe-based BMGs are not used as structural materials in service, so far. The major obstacle is their inherent brittleness under mechanical loading, once a crack is developed ...

  12. Heterogeneity of the Abnormal Prion Protein (PrPSc) of the Chandler Scrapie Strain.

    Science.gov (United States)

    Kasai, Kazuo; Iwamaru, Yoshifumi; Masujin, Kentaro; Imamura, Morikazu; Mohri, Shirou; Yokoyama, Takashi

    2013-02-18

    The pathological prion protein, PrPSc, displays various sizes of aggregates. In this study, we investigated the conformation, aggregation stability and proteinase K (PK)-sensitivity of small and large PrPSc aggregates of mouse-adapted prion strains. We showed that small PrPSc aggregates, previously thought to be PK-sensitive, are resistant to PK digestion. Furthermore, we showed that small PrPSc aggregates of the Chandler scrapie strain have greater resistance to PK digestion and aggregation-denaturation than large PrPSc aggregates of this strain. We conclude that this strain consists of heterogeneous PrPSc.

  13. Silencing of acidic pathogenesis-related PR-1 genes increases extracellular beta-(1 -> 3)-glucanase activity at the onset of tobacco defence reactions

    DEFF Research Database (Denmark)

    Riviere, M.P.; Marais, A.; Ponchet, M.

    2008-01-01

    silenced. Plants lacking extracellular PR-1s were more susceptible than wild-type plants to the oomycete Phytophthora parasitica but displayed unaffected systemic acquired resistance and developmental resistance to this pathogen. Treatment with salicylic acid up-regulates the PR-1g gene, encoding a basic...... protein of the PR-1 family, in PR-1-deficient tobacco, indicating that PR-1 expression may repress that of PR-1g. This shows that acidic PR-1s are dispensable for expression of salicylic acid-dependent acquired resistances against P. parasitica and may reveal a functional overlap in tobacco defence......The class 1 pathogenesis-related (PR) proteins are thought to be involved in plant defence responses, but their molecular functions are unknown. The function of PR-1 was investigated in tobacco by generating stable PR-1a-silenced lines in which other acidic PR-1 genes (PR-1b and PR-1c) were...

  14. Electrical resistivities of rocks from Chalk River

    International Nuclear Information System (INIS)

    Katsube, T.J.; Hume, J.P.

    1989-01-01

    Bulk rock resistivity and bulk surface resistivity measurements have been obtained for 40 gneissic rock samples from Chalk River, Ontario. Though bulk rock resistivity is a function of pore structure, pore-fluid resistivity and pore-surface resistivity, the amount of data documented for pore-surface resistivity is small compared to that for pore structure and pore-fluid resistivity. This study indicates that pore-surface resistivity has a significant effect on bulk rock resistivity. It is important that this fact be considered when interpreting resistivity data obtained by geophysical methods. In addition, a group of mafic gneiss samples had pore-surface resistivity values that were much lower than those reported for clays, glass beads or petroleum reservoir rocks. This is thought to be due to metallic minerals lining the pore walls. Other rock samples collected from the same area showed pore-surface resistivity value similar to those reported in the literature

  15. PrP N-terminal domain triggers PrP(Sc)-like aggregation of Dpl.

    Science.gov (United States)

    Erlich, Paul; Cesbron, Jean-Yves; Lemaire-Vieille, Catherine; Curt, Aurélie; Andrieu, Jean-Pierre; Schoehn, Guy; Jamin, Marc; Gagnon, Jean

    2008-01-18

    Transmissible spongiform encephalopathies are fatal neurodegenerative disorders thought to be transmitted by self-perpetuating conformational conversion of a neuronal membrane glycoprotein (PrP(C), for "cellular prion protein") into an abnormal state (PrP(Sc), for "scrapie prion protein"). Doppel (Dpl) is a protein that shares significant biochemical and structural homology with PrP(C). In contrast to its homologue PrP(C), Dpl is unable to participate in prion disease progression or to achieve an abnormal PrP(Sc)-like state. We have constructed a chimeric mouse protein, composed of the N-terminal domain of PrP(C) (residues 23-125) and the C-terminal part of Dpl (residues 58-157). This chimeric protein displays PrP-like biochemical and structural features; when incubated in presence of NaCl, the alpha-helical monomer forms soluble beta-sheet-rich oligomers which acquire partial resistance to pepsin proteolysis in vitro, as do PrP oligomers. Moreover, the presence of aggregates akin to protofibrils is observed in soluble oligomeric species by electron microscopy.

  16. Modelling of bulk superconductor magnetization

    International Nuclear Information System (INIS)

    Ainslie, M D; Fujishiro, H

    2015-01-01

    This paper presents a topical review of the current state of the art in modelling the magnetization of bulk superconductors, including both (RE)BCO (where RE = rare earth or Y) and MgB 2 materials. Such modelling is a powerful tool to understand the physical mechanisms of their magnetization, to assist in interpretation of experimental results, and to predict the performance of practical bulk superconductor-based devices, which is particularly important as many superconducting applications head towards the commercialization stage of their development in the coming years. In addition to the analytical and numerical techniques currently used by researchers for modelling such materials, the commonly used practical techniques to magnetize bulk superconductors are summarized with a particular focus on pulsed field magnetization (PFM), which is promising as a compact, mobile and relatively inexpensive magnetizing technique. A number of numerical models developed to analyse the issues related to PFM and optimise the technique are described in detail, including understanding the dynamics of the magnetic flux penetration and the influence of material inhomogeneities, thermal properties, pulse duration, magnitude and shape, and the shape of the magnetization coil(s). The effect of externally applied magnetic fields in different configurations on the attenuation of the trapped field is also discussed. A number of novel and hybrid bulk superconductor structures are described, including improved thermal conductivity structures and ferromagnet–superconductor structures, which have been designed to overcome some of the issues related to bulk superconductors and their magnetization and enhance the intrinsic properties of bulk superconductors acting as trapped field magnets. Finally, the use of hollow bulk cylinders/tubes for shielding is analysed. (topical review)

  17. Modelling of bulk superconductor magnetization

    Science.gov (United States)

    Ainslie, M. D.; Fujishiro, H.

    2015-05-01

    This paper presents a topical review of the current state of the art in modelling the magnetization of bulk superconductors, including both (RE)BCO (where RE = rare earth or Y) and MgB2 materials. Such modelling is a powerful tool to understand the physical mechanisms of their magnetization, to assist in interpretation of experimental results, and to predict the performance of practical bulk superconductor-based devices, which is particularly important as many superconducting applications head towards the commercialization stage of their development in the coming years. In addition to the analytical and numerical techniques currently used by researchers for modelling such materials, the commonly used practical techniques to magnetize bulk superconductors are summarized with a particular focus on pulsed field magnetization (PFM), which is promising as a compact, mobile and relatively inexpensive magnetizing technique. A number of numerical models developed to analyse the issues related to PFM and optimise the technique are described in detail, including understanding the dynamics of the magnetic flux penetration and the influence of material inhomogeneities, thermal properties, pulse duration, magnitude and shape, and the shape of the magnetization coil(s). The effect of externally applied magnetic fields in different configurations on the attenuation of the trapped field is also discussed. A number of novel and hybrid bulk superconductor structures are described, including improved thermal conductivity structures and ferromagnet-superconductor structures, which have been designed to overcome some of the issues related to bulk superconductors and their magnetization and enhance the intrinsic properties of bulk superconductors acting as trapped field magnets. Finally, the use of hollow bulk cylinders/tubes for shielding is analysed.

  18. A decrease in bulk water and mannitol and accumulation of trehalose and trehalose-based oligosaccharides define a two-stage maturation process towards extreme stress resistance in ascospores of Neosartorya fischeri (Aspergillus fischeri)

    NARCIS (Netherlands)

    Wyatt, Timon T; Golovina, Elena A; van Leeuwen, Richard; Hallsworth, John E; Wösten, Han A B; Dijksterhuis, Jan

    Fungal propagules survive stresses better than vegetative cells. Neosartorya fischeri, an Aspergillus teleomorph, forms ascospores that survive high temperatures or drying followed by heat. Not much is known about maturation and development of extreme stress resistance in fungal cells. This study

  19. Charm contribution to bulk viscosity

    Science.gov (United States)

    Laine, M.; Sohrabi, Kiyoumars A.

    2015-02-01

    In the range of temperatures reached in future heavy ion collision experiments, hadronic pair annihilations and creations of charm quarks may take place within the lifetime of the plasma. As a result, charm quarks may increase the bulk viscosity affecting the early stages of hydrodynamic expansion. Assuming thermalisation, we estimate the charm contribution to bulk viscosity within the same effective kinetic theory framework in which the light parton contribution has been computed previously. The time scale at which this physics becomes relevant is related to the width of the transport peak associated with the trace anomaly correlator and is found to be fm/c for MeV.

  20. Bulk water freezing dynamics on superhydrophobic surfaces

    Science.gov (United States)

    Chavan, S.; Carpenter, J.; Nallapaneni, M.; Chen, J. Y.; Miljkovic, N.

    2017-01-01

    In this study, we elucidate the mechanisms governing the heat-transfer mediated, non-thermodynamic limited, freezing delay on non-wetting surfaces for a variety of characteristic length scales, Lc (volume/surface area, 3 mm commercial superhydrophobic spray coatings, showing a monotonic increase in freezing time with coating thickness. The added thermal resistance of thicker coatings was much larger than that of the nanoscale superhydrophobic features, which reduced the droplet heat transfer and increased the total freezing time. Transient finite element method heat transfer simulations of the water slab freezing process were performed to calculate the overall heat transfer coefficient at the substrate-water/ice interface during freezing, and shown to be in the range of 1-2.5 kW/m2K for these experiments. The results shown here suggest that in order to exploit the heat-transfer mediated freezing delay, thicker superhydrophobic coatings must be deposited on the surface, where the coating resistance is comparable to the bulk water/ice conduction resistance.

  1. Estudo comparativo da resistência à fratura de pré-molares superiores íntegros e restaurados com amálgama aderido Comparative study of the fracture resistance of sound upper premolars and upper premolars restored with bonded amalgam

    Directory of Open Access Journals (Sweden)

    André Marcelo Peruchi Minto

    2002-06-01

    Full Text Available No presente estudo avaliou-se, in vitro, a resistência à fratura de pré-molares superiores preparados com cavidades de classe II compostas (conservadoras e extensas restauradas com amálgama aderido a dois tipos diferentes de sistemas adesivos. Setenta dentes foram divididos em 4 grupos: grupo 1 ou controle com 10 dentes íntegros; grupo 2 com 20 dentes, sendo 10 cavidades conservadoras e 10 extensas restauradas com amálgama sem qualquer tipo de forramento. O grupo 3 e o grupo 4 foram compostos da mesma forma que o grupo 2, sendo que o primeiro recebeu cimento de ionômero de vidro (Vitrebond - 3M e o segundo, adesivo dental (Scotchbond Multi-Purpose Plus - 3M, antes de serem restaurados. Os dentes haviam sido incluídos anteriormente em cilindros de PVC e fixados com resina acrílica. Após serem restaurados e termociclados, foram submetidos à fratura por força de compressão em uma máquina universal de testes EMIC-MEM 2000. Após análise de variância e aplicação do teste complementar de Tukey, concluiu-se que os sistemas adesivos utilizados condicionaram o aumento da resistência à fratura da estrutura dental nas cavidades convencionais, sendo os dentes com cavidades conservadoras mais resistentes em qualquer condição experimental.The purpose of this in vitro study was to determine the fracture resistance of upper premolars which had received class II preparations (conservative and extensive and were restored with bonded amalgam, with two different adhesive systems. Seventy teeth were divided in four groups: group 1 (control, with ten sound teeth; group 2, with twenty prepared teeth (10 teeth received conservative cavities and 10, extensive cavities restored with amalgam without any kind of liner; groups 3 and 4, similar to group 2, though with linings of glass ionomer cement (Vitrebond - 3M (group 3 and dental adhesive (Scotchbond Multi-Purpose Plus - 3M (group 4. The teeth were previously fixed in PVC cylinders with acrylic

  2. Insight into the PrPC-->PrPSc conversion from the structures of antibody-bound ovine prion scrapie-susceptibility variants.

    Science.gov (United States)

    Eghiaian, Frédéric; Grosclaude, Jeanne; Lesceu, Stéphanie; Debey, Pascale; Doublet, Bénédicte; Tréguer, Eric; Rezaei, Human; Knossow, Marcel

    2004-07-13

    Prion diseases are associated with the conversion of the alpha-helix rich prion protein (PrPC) into a beta-structure-rich insoluble conformer (PrPSc) that is thought to be infectious. The mechanism for the PrPC-->PrPSc conversion and its relationship with the pathological effects of prion diseases are poorly understood, partly because of our limited knowledge of the structure of PrPSc. In particular, the way in which mutations in the PRNP gene yield variants that confer different susceptibilities to disease needs to be clarified. We report here the 2.5-A-resolution crystal structures of three scrapie-susceptibility ovine PrP variants complexed with an antibody that binds to PrPC and to PrPSc; they identify two important features of the PrPC-->PrPSc conversion. First, the epitope of the antibody mainly consists of the last two turns of ovine PrP second alpha-helix. We show that this is a structural invariant in the PrPC-->PrPSc conversion; taken together with biochemical data, this leads to a model of the conformational change in which the two PrPC C-terminal alpha-helices are conserved in PrPSc, whereas secondary structure changes are located in the N-terminal alpha-helix. Second, comparison of the structures of scrapie-sensitivity variants defines local changes in distant parts of the protein that account for the observed differences of PrPC stability, resistant variants being destabilized compared with sensitive ones. Additive contributions of these sensitivity-modulating mutations to resistance suggest a possible causal relationship between scrapie resistance and lowered stability of the PrP protein.

  3. Identification of PrP sequences essential for the interaction between the PrP polymers and Aβ peptide in a yeast-based assay.

    Science.gov (United States)

    Rubel, Aleksandr A; Ryzhova, Tatyana A; Antonets, Kirill S; Chernoff, Yury O; Galkin, Alexey

    2013-01-01

    Alzheimer disease is associated with the accumulation of oligomeric amyloid β peptide (Aβ), accompanied by synaptic dysfunction and neuronal death. Polymeric form of prion protein (PrP), PrP(Sc), is implicated in transmissible spongiform encephalopathies (TSEs). Recently, it was shown that the monomeric cellular form of PrP (PrP(C)), located on the neuron surface, binds Aβ oligomers (and possibly other β-rich conformers) via the PrP(23-27) and PrP(90-110) segments, acting as Aβ receptor. On the other hand, PrP(Sc) polymers efficiently bind to Aβ monomers and accelerate their oligomerization. To identify specific PrP sequences that are essential for the interaction between PrP polymers and Aβ peptide, we have co-expressed Aβ and PrP (or its shortened derivatives), fused to different fluorophores, in the yeast cell. Our data show that the 90-110 and 28-89 regions of PrP control the binding of proteinase-resistant PrP polymers to the Aβ peptide, whereas the 23-27 segment of PrP is dispensable for this interaction. This indicates that the set of PrP fragments involved in the interaction with Aβ depends on PrP conformational state.

  4. Properties of Bulk Sintered Silver As a Function of Porosity

    Energy Technology Data Exchange (ETDEWEB)

    Wereszczak, Andrew A [ORNL; Vuono, Daniel J [ORNL; Wang, Hsin [ORNL; Ferber, Mattison K [ORNL; Liang, Zhenxian [ORNL

    2012-06-01

    This report summarizes a study where various properties of bulk-sintered silver were investigated over a range of porosity. This work was conducted within the National Transportation Research Center's Power Device Packaging project that is part of the DOE Vehicle Technologies Advanced Power Electronics and Electric Motors Program. Sintered silver, as an interconnect material in power electronics, inherently has porosity in its produced structure because of the way it is made. Therefore, interest existed in this study to examine if that porosity affected electrical properties, thermal properties, and mechanical properties because any dependencies could affect the intended function (e.g., thermal transfer, mechanical stress relief, etc.) or reliability of that interconnect layer and alter how its performance is modeled. Disks of bulk-sintered silver were fabricated using different starting silver pastes and different sintering conditions to promote different amounts of porosity. Test coupons were harvested out of the disks to measure electrical resistivity and electrical conductivity, thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and yield stress. The authors fully recognize that the microstructure of processed bulk silver coupons may indeed not be identical to the microstructure produced in thin (20-50 microns) layers of sintered silver. However, measuring these same properties with such a thin actual structure is very difficult, requires very specialized specimen preparation and unique testing instrumentation, is expensive, and has experimental shortfalls of its own, so the authors concluded that the herein measured responses using processed bulk sintered silver coupons would be sufficient to determine acceptable values of those properties. Almost all the investigated properties of bulk sintered silver changed with porosity content within a range of 3-38% porosity. Electrical resistivity, electrical conductivity

  5. Coulombic Fluids Bulk and Interfaces

    CERN Document Server

    Freyland, Werner

    2011-01-01

    Ionic liquids have attracted considerable interest in recent years. In this book the bulk and interfacial physico-chemical characteristics of various fluid systems dominated by Coulomb interactions are treated which includes molten salts, ionic liquids as well as metal-molten salt mixtures and expanded fluid metals. Of particular interest is the comparison of the different systems. Topics in the bulk phase concern the microscopic structure, the phase behaviour and critical phenomena, and the metal-nonmetal transition. Interfacial phenomena include wetting transitions, electrowetting, surface freezing, and the electrified ionic liquid/ electrode interface. With regard to the latter 2D and 3D electrochemical phase formation of metals and semi-conductors on the nanometer scale is described for a number of selected examples. The basic concepts and various experimental methods are introduced making the book suitable for both graduate students and researchers interested in Coulombic fluids.

  6. Longitudinal bulk acoustic mass sensor

    DEFF Research Database (Denmark)

    Hales, Jan Harry; Teva, Jordi; Boisen, Anja

    2009-01-01

    A polycrystalline silicon longitudinal bulk acoustic cantilever is fabricated and operated in air at 51 MHz. A mass sensitivity of 100 Hz/fg (1 fg=10(-15) g) is obtained from the preliminary experiments where a minute mass is deposited on the device by means of focused ion beam. The total noise i...... in the currently applied measurement system allows for a minimum detectable mass of 0.5 fg in air.......A polycrystalline silicon longitudinal bulk acoustic cantilever is fabricated and operated in air at 51 MHz. A mass sensitivity of 100 Hz/fg (1 fg=10(-15) g) is obtained from the preliminary experiments where a minute mass is deposited on the device by means of focused ion beam. The total noise...

  7. PR, Lobbyism and Democracy

    DEFF Research Database (Denmark)

    Ørsten, Mark; Willig, Ida; Pedersen, Leif Hemming

    2017-01-01

    The growth of PR in Scandinavia is linked both to the mediatization of politics and to the decline of corporatism. Studies in Sweden and Norway suggest that one consequence of these changes is the increasing number of politicians who find new careers as lobbyists in the private sector. In this st......The growth of PR in Scandinavia is linked both to the mediatization of politics and to the decline of corporatism. Studies in Sweden and Norway suggest that one consequence of these changes is the increasing number of politicians who find new careers as lobbyists in the private sector...

  8. Influence of the valence states of atoms on conducting properties of PrBa2Cu3O6+x

    International Nuclear Information System (INIS)

    Romanenko, A.I.; Zakharchuk, N.F.; Naumov, N.G.; Fedorov, V.E.; Paek, U.H.

    1997-01-01

    Pr 3+ valent state only was discovered in PrBa 2 Cu 3 O 6+x within the oxygen content range 0.4 ≤ x ≤ 0.6. Out of this range, Pr 4+ state appears also. All the samples obtained showed insulating behavior of resistivity r(T). In PrBa 2 Cu 3 O 6+x (0.4 ≤ x ≤ 0.6), the resistivity is Mott variable-range hopping conduction type and is connected with oxygen disorder only. Out of this range, the localization is much stronger; this increase is due to Pr 4+ /Pr 3+ position disorder. Also, the localization decreases after annealing at room temperature is the result of ordering. Thus, the absence of metallic (and therefore superconducting) state in PrBa 2 Cu 3 O 6+x is due to the presence of both Pr 4+ and Pr 4+ /Pr 3+ disorder

  9. Bulk Superconductors in Mobile Application

    Science.gov (United States)

    Werfel, F. N.; Delor, U. Floegel-; Rothfeld, R.; Riedel, T.; Wippich, D.; Goebel, B.; Schirrmeister, P.

    We investigate and review concepts of multi - seeded REBCO bulk superconductors in mobile application. ATZ's compact HTS bulk magnets can trap routinely 1 T@77 K. Except of magnetization, flux creep and hysteresis, industrial - like properties as compactness, power density, and robustness are of major device interest if mobility and light-weight construction is in focus. For mobile application in levitated trains or demonstrator magnets we examine the performance of on-board cryogenics either by LN2 or cryo-cooler application. The mechanical, electric and thermodynamical requirements of compact vacuum cryostats for Maglev train operation were studied systematically. More than 30 units are manufactured and tested. The attractive load to weight ratio is more than 10 and favours group module device constructions up to 5 t load on permanent magnet (PM) track. A transportable and compact YBCO bulk magnet cooled with in-situ 4 Watt Stirling cryo-cooler for 50 - 80 K operation is investigated. Low cooling power and effective HTS cold mass drives the system construction to a minimum - thermal loss and light-weight design.

  10. PrP-C1 fragment in cattle brains reveals features of the transmissible spongiform encephalopathy associated PrPsc.

    Science.gov (United States)

    Serra, Fabienne; Müller, Joachim; Gray, John; Lüthi, Ramona; Dudas, Sandor; Czub, Stefanie; Seuberlich, Torsten

    2017-03-15

    Three different types of bovine spongiform encephalopathy (BSE) are known and supposedly caused by distinct prion strains: the classical (C-) BSE type that was typically found during the BSE epidemic, and two relatively rare atypical BSE types, termed H-BSE and L-BSE. The three BSE types differ in the molecular phenotype of the disease associated prion protein, namely the N-terminally truncated proteinase K (PK) resistant prion protein fragment (PrP res ). In this study, we report and analyze yet another PrP res type (PrP res-2011 ), which was found in severely autolytic brain samples of two cows in the framework of disease surveillance in Switzerland in 2011. Analysis of brain tissues from these animals by PK titration and PK inhibitor assays ruled out the process of autolysis as the cause for the aberrant PrP res profile. Immunochemical characterization of the PrP fragments present in the 2011 cases by epitope mapping indicated that PrP res-2011 corresponds in its primary sequence to the physiologically occurring PrP-C1 fragment. However, high speed centrifugation, sucrose gradient assay and NaPTA precipitation revealed biochemical similarities between PrP res-2011 and the disease-associated prion protein found in BSE affected cattle in terms of detergent insolubility, PK resistance and PrP aggregation. Although it remains to be established whether PrP res-2011 is associated with a transmissible disease, our results point out the need of further research on the role the PrP-C1 aggregation and misfolding in health and disease. Copyright © 2017. Published by Elsevier B.V.

  11. Bulk dynamics for interfacial growth models

    OpenAIRE

    Lopez, Cristobal; Garrido, Pedro L.; Santos, Francisco de los

    2000-01-01

    We study the influence of the bulk dynamics of a growing cluster of particles on the properties of its interface. First, we define a general bulk growth model by means of a continuum Master equation for the evolution of the bulk density field. This general model just considers an arbitrary addition of particles (though it can be easily generalized to consider subtraction) with no other physical restriction. The corresponding Langevin equation for this bulk density field is derived where the i...

  12. Role of Pr substitution as deoxygenation in suppression of superconductivity in GdPr-123 system

    Science.gov (United States)

    Yamani, Z.; Akhavan, M.

    1996-02-01

    Predominantly single phase polycrystalline Gd 1- xPr xBa 2Cu 3O 7- y (GdPr-123) samples with 0 ≤ x ≤ 1.0 have been prepared by standard solid state reaction technique and characterized by XRD. The electrical resistivity measurements show the suppression of superconductivity with increasing x. Two plateaus appear in the Tc versus x curve at x ≈ 0-0.05 and at x ≈ 0.15-0.25 followed by a decrease to zero at xcr ≈ 0.45, similar to the plateaus of Tc versus 7 - y curve at 7 - y ≈ 6.8 -7 and at 7 - y ≈ 6.55-6.75 in RBa 2Cu 3O 7 - y ( R-123) ( R: Y or rare earth except Ce, Pr, Pm, Tb) systems. The valency of Pr was determined by magnetization measurements in the temperature range 100 K to 250 K. This data indicates a mixed valence state for Pr ions with an effective magnetic moment μ ≈ 2.69 μB per Pr ion, which yields a valency for Pr of ≈ 3.86 +. For these systems, Tc( x) does not follow the Abrikosov-Gor'kov pair breaking theory. We suggest that the suppression of superconductivity by Pr-substitution can be explained by means of an effective increasing of the oxygen deficiency in the structure, in a similar way to what happens in an R-123 system, when 7 - y is decreased in a controlled manner. This implies that CuO 2 planes are responsible for superconductivity through the effect of chains.

  13. Neutron Scattering from fcc Pr and Pr3Tl

    DEFF Research Database (Denmark)

    Birgeneau, R. J.; Als-Nielsen, Jens Aage; Bucher, E.

    1972-01-01

    Elastic-neutron-scattering measurements on the singlet-ground-state ferromagnets fcc Pr and Pr3 Tl are reported. Both exhibit magnetic phase transitions, possibly to a simple ferromagnetic state at 20 and 11.6 °K, respectively. The transitions appear to be of second order although that in fcc Pr...... is clearly anomalous. Additional information on the inelastic scattering studies of the Γ1-Γ4 excitons in these systems is presented. dhcp Pr is also briefly discussed....

  14. Evaluation of fracture resistance of endodontically treated teeth restored with prefabricated posts and composites with varying quantities of remaining coronal tooth structure Avaliação da resistência à fratura de dentes tratados endodonticamente restaurados com pinos pré-fabricados e resinas compostas variando o remanescente dentário coronal

    Directory of Open Access Journals (Sweden)

    Murilo Pereira de Melo

    2005-06-01

    Full Text Available OBJECTIVES: The aim of this study was to evaluate the influence of remaining coronal tooth structure on endodontically treated teeth restored with prefabricated posts and two different composites for core build-up: dual-cured resin (Enforce Core and light-cured resin (Z-250. METHODS: Fourty freshly extracted canines were endodontically treated and divided into four groups: Group I - teeth with 3mm remaining coronal structure, restored with Enforce Core; Group II - teeth with 3mm remaining coronal structure, restored with Z-250; Group III - teeth with no remaining coronal structure, restored with Enforce; Group IV - teeth with no remaining coronal structure, restored with Z-250. After restoration, the teeth were embedded in acrylic resin and the fracture resistance was measured on a universal testing machine at 45 degrees to the long axis of the tooth until failure. RESULTS: Data were analyzed by two-way analysis of variance, which showed significant differences between groups (p=0.00. The Tukey test did not show significant differences between specimens with and without remaining coronal structure. Conversely, significant difference was observed between groups with different core build-up. The highest values of fracture resistance were found in the group restored with light-cured resin. SIGNIFICANCE: The remaining coronal tooth structure did not influence the resistance of endodontically treated teeth; however, the change of core build-up was able to modify this resistence.O objetivo desta pesquisa foi avaliar a influência do remanescente dentário coronal de dentes tratados endodonticamente, restaurados com pinos pré-fabricados e duas resinas como núcleos de preenchimento, uma de presa dual (Enforce Core e outra fotopolimerizável (Z-250. Foram utilizados 40 caninos superiores humanos extraídos, divididos em quatro grupos de 10 espécimes: Grupo l - com remanescente dentário coronal de 3mm e restaurados com Enforce Core; Grupo ll - com

  15. Developing a Penetrometer-Based Mapping System for Visualizing Silage Bulk Density from the Bunker Silo Face

    Directory of Open Access Journals (Sweden)

    Menghua Li

    2016-07-01

    Full Text Available For silage production, high bulk density (BD is critical to minimize aerobic deterioration facilitated by oxygen intrusion. To precisely assess packing quality for bunker silos, there is a desire to visualize the BD distribution within the silage. In this study, a penetrometer-based mapping system was developed. The data processing included filtering of the penetration friction component (PFC out of the penetration resistance (PR, transfer of the corrected penetration resistance (PRc to BD, incorporation of Kriged interpolation for data expansion and map generation. The experiment was conducted in a maize bunker silo (width: 8 m, middle height: 3 m. The BD distributions near the bunker silo face were represented using two map groups, one related to horizontal- and the other to vertical-density distribution patterns. We also presented a comparison between the map-based BD results and core sampling data. Agreement between the two measurement approaches (RMSE = 19.175 kg·m−3 demonstrates that the developed penetrometer mapping system may be beneficial for rapid assessment of aerobic deterioration potential in bunker silos.

  16. Developing a Penetrometer-Based Mapping System for Visualizing Silage Bulk Density from the Bunker Silo Face.

    Science.gov (United States)

    Li, Menghua; Jungbluth, Kerstin H; Sun, Yurui; Cheng, Qiang; Maack, Christian; Buescher, Wolfgang; Lin, Jianhui; Zhou, Haiyang; Wang, Zhongyi

    2016-07-05

    For silage production, high bulk density (BD) is critical to minimize aerobic deterioration facilitated by oxygen intrusion. To precisely assess packing quality for bunker silos, there is a desire to visualize the BD distribution within the silage. In this study, a penetrometer-based mapping system was developed. The data processing included filtering of the penetration friction component (PFC) out of the penetration resistance (PR), transfer of the corrected penetration resistance (PRc) to BD, incorporation of Kriged interpolation for data expansion and map generation. The experiment was conducted in a maize bunker silo (width: 8 m, middle height: 3 m). The BD distributions near the bunker silo face were represented using two map groups, one related to horizontal- and the other to vertical-density distribution patterns. We also presented a comparison between the map-based BD results and core sampling data. Agreement between the two measurement approaches (RMSE = 19.175 kg·m(-3)) demonstrates that the developed penetrometer mapping system may be beneficial for rapid assessment of aerobic deterioration potential in bunker silos.

  17. Evolution and sign control of square-wave-like anisotropic magneto-resistance in spatially confined La{sub 0.3}Pr{sub 0.4}Ca{sub 0.3}MnO{sub 3}/LaAlO{sub 3}(001) manganite thin films

    Energy Technology Data Exchange (ETDEWEB)

    Alagoz, H. S., E-mail: alagoz@ualberta.ca; Jeon, J.; Keating, S.; Chow, K. H., E-mail: khchow@ualberta.ca; Jung, J., E-mail: jjung@ualberta.ca [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2E1 (Canada)

    2016-04-14

    We investigated magneto-transport properties of a compressively strained spatially confined La{sub 0.3}Pr{sub 0.4}Ca{sub 0.3}MnO{sub 3} (LPCMO) thin film micro-bridge deposited on LaAlO{sub 3}. Angular dependence of the magneto-resistance R(θ) of this bridge, where θ is the angle between the magnetic field and the current directions in the film plane, exhibits sharp positive and negative percolation jumps near T{sub MIT}. The sign and the magnitude of these jumps can be tuned using the magnetic field. Such behavior has not been observed in LPCMO micro-bridges subjected to tensile strain, indicating a correlation between the type of the lattice strain, the distribution of electronic domains, and the anisotropic magneto-resistance in spatially confined manganite systems.

  18. Limited bacterial diversity within a treatment plant receiving antibiotic containing waste from bulk drug production

    NARCIS (Netherlands)

    Marathe, Nachiket P.; Shetty, Sudarshan A.; Shouche, Yogesh S.; Larsson, D.G.J.

    2016-01-01

    Biological treatment of waste water from bulk drug production, contaminated with high levels of fluoroquinolone antibiotics, can lead to massive enrichment of antibiotic resistant bacteria, resistance genes and associated mobile elements, as previously shown. Such strong selection may be boosted

  19. PR, Lobbyism and Democracy

    DEFF Research Database (Denmark)

    Ørsten, Mark; Willig, Ida; Pedersen, Leif Hemming

    2017-01-01

    The growth of PR in Scandinavia is linked both to the mediatization of politics and to the decline of corporatism. Studies in Sweden and Norway suggest that one consequence of these changes is the increasing number of politicians who find new careers as lobbyists in the private sector. In this st......The growth of PR in Scandinavia is linked both to the mediatization of politics and to the decline of corporatism. Studies in Sweden and Norway suggest that one consequence of these changes is the increasing number of politicians who find new careers as lobbyists in the private sector....... In this study, we have constructed a data set of all members of the Danish Parliament who have left politics from 1981 to 2015 (n= 613) and identified the number and type of job positions they have taken up subsequently (n= 1094). We find that especially from the 1990s we can register revolving door activity...

  20. Handling of bulk solids theory and practice

    CERN Document Server

    Shamlou, P A

    1990-01-01

    Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

  1. Convection-enhanced delivery of AAV2-PrPshRNA in prion-infected mice.

    Directory of Open Access Journals (Sweden)

    Misol Ahn

    Full Text Available Prion disease is caused by a single pathogenic protein (PrPSc, an abnormal conformer of the normal cellular prion protein PrPC. Depletion of PrPC in prion knockout mice makes them resistant to prion disease. Thus, gene silencing of the Prnp gene is a promising effective therapeutic approach. Here, we examined adeno-associated virus vector type 2 encoding a short hairpin RNA targeting Prnp mRNA (AAV2-PrP-shRNA to suppress PrPC expression both in vitro and in vivo. AAV2-PrP-shRNA treatment suppressed PrP levels and prevented dendritic degeneration in RML-infected brain aggregate cultures. Infusion of AAV2-PrP-shRNA-eGFP into the thalamus of CD-1 mice showed that eGFP was transported to the cerebral cortex via anterograde transport and the overall PrPC levels were reduced by ∼ 70% within 4 weeks. For therapeutic purposes, we treated RML-infected CD-1 mice with AAV2-PrP-shRNA beginning at 50 days post inoculation. Although AAV2-PrP-shRNA focally suppressed PrPSc formation in the thalamic infusion site by ∼ 75%, it did not suppress PrPSc formation efficiently in other regions of the brain. Survival of mice was not extended compared to the untreated controls. Global suppression of PrPC in the brain is required for successful therapy of prion diseases.

  2. Bulk analysis using nuclear techniques

    International Nuclear Information System (INIS)

    Borsaru, M.; Holmes, R.J.; Mathew, P.J.

    1983-01-01

    Bulk analysis techniques developed for the mining industry are reviewed. Using penetrating neutron and #betta#-radiations, measurements are obtained directly from a large volume of sample (3-30 kg) #betta#-techniques were used to determine the grade of iron ore and to detect shale on conveyor belts. Thermal neutron irradiation was developed for the simultaneous determination of iron and aluminium in iron ore on a conveyor belt. Thermal-neutron activation analysis includes the determination of alumina in bauxite, and manganese and alumina in manganese ore. Fast neutron activation analysis is used to determine silicon in iron ores, and alumina and silica in bauxite. Fast and thermal neutron activation has been used to determine the soil in shredded sugar cane. (U.K.)

  3. Bulk hydrogen analysis, using neutrons

    International Nuclear Information System (INIS)

    Shaikh, A.M.; Sinha, A.; Rajagopal, H.

    1998-01-01

    The project deals with the detection of hydrogen in bulk materials using neutrons. The ubiquitous presence of hydrogen, its very low mass and relatively good neutron cross-section of hydrogen and deuterium can be exploited to study variety of details of hydrogen in metal alloys. Within this CRP the following studies have been carried out: neutron radiography has been applied to study zirconium hydride blisters in zircaloy pressure tube; neutron diffraction has been applied to identify hydride phase in the zircaloy-2 pressure tubes; neutron radiography using epithermal neutrons has been applied to produce radiographs of a thin cellophane film; an electronic imaging system based on commercially available image intensifier tube and low cost CCD camera has been developed and tested

  4. Gold based bulk metallic glass

    Science.gov (United States)

    Schroers, Jan; Lohwongwatana, Boonrat; Johnson, William L.; Peker, Atakan

    2005-08-01

    Gold-based bulk metallic glass alloys based on Au-Cu-Si are introduced. The alloys exhibit a gold content comparable to 18-karat gold. They show very low liquidus temperature, large supercooled liquid region, and good processibility. The maximum casting thickness exceeds 5mm in the best glassformer. Au49Ag5.5Pd2.3Cu26.9Si16.3 has a liquidus temperature of 644K, a glass transition temperature of 401K, and a supercooled liquid region of 58K. The Vickers hardness of the alloys in this system is ˜350Hv, twice that of conventional 18-karat crystalline gold alloys. This combination of properties makes the alloys attractive for many applications including electronic, medical, dental, surface coating, and jewelry.

  5. Isotopic signatures by bulk analyses

    International Nuclear Information System (INIS)

    Efurd, D.W.; Rokop, D.J.

    1997-01-01

    Los Alamos National Laboratory has developed a series of measurement techniques for identification of nuclear signatures by analyzing bulk samples. Two specific applications for isotopic fingerprinting to identify the origin of anthropogenic radioactivity in bulk samples are presented. The first example is the analyses of environmental samples collected in the US Arctic to determine the impact of dumping of radionuclides in this polar region. Analyses of sediment and biota samples indicate that for the areas sampled the anthropogenic radionuclide content of sediments was predominantly the result of the deposition of global fallout. The anthropogenic radionuclide concentrations in fish, birds and mammals were very low. It can be surmised that marine food chains are presently not significantly affected. The second example is isotopic fingerprinting of water and sediment samples from the Rocky Flats Facility (RFP). The largest source of anthropogenic radioactivity presently affecting surface-waters at RFP is the sediments that are currently residing in the holding ponds. One gram of sediment from a holding pond contains approximately 50 times more plutonium than 1 liter of water from the pond. Essentially 100% of the uranium in Ponds A-1 and A-2 originated as depleted uranium. The largest source of radioactivity in the terminal Ponds A-4, B-5 and C-2 was naturally occurring uranium and its decay product radium. The uranium concentrations in the waters collected from the terminal ponds contained 0.05% or less of the interim standard calculated derived concentration guide for uranium in waters available to the public. All of the radioactivity observed in soil, sediment and water samples collected at RFP was naturally occurring, the result of processes at RFP or the result of global fallout. No extraneous anthropogenic alpha, beta or gamma activities were detected. The plutonium concentrations in Pond C-2 appear to vary seasonally

  6. Studies of bulk heterojunction solar cells

    Science.gov (United States)

    Cossel, Raquel; McIntyre, Max; Tzolov, Marian

    We are studying bulk heterojunction solar cells that were fabricated using a mixture of PCPDTBT and PCBM­C60. The impedance data of the cells in dark responded like a simple RC circuit. The value of the dielectric constant derived from these results is consistent with the values reported in the literature for these materials. We are showing that the parallel resistance in the equivalent circuit of linear lump elements can be interpreted using the DC current­voltage measurements. The impedance spectra under light illumination indicated the existence of additional polarization. This extra feature can be described by a model that includes a series RC circuit in parallel with the equivalent circuit for a device in dark. The physical interpretation of the additional polarization is based on photo­generated charges getting trapped in wells, which have a characteristic relaxation time corresponding to the observed break frequency in the impedance spectra. We have studied the influence of the anode and cathode interface on this phenomena, either by using different interface materials, or by depositing the metal electrode while the substate is heated.

  7. Structural, magnetic, and electronic transport properties of pyrochlore iridate Pr2Ir2O7

    Science.gov (United States)

    Kumar, Harish; Chaurasia, Rachna; Kumari, Pratibha; Paramanik, A. K.

    2018-04-01

    We have studied the structural, magnetic, and electronic transport properties of pyrochlore iridate Pr2Ir2O7. Structural investigation has been done using x-ray powder diffraction and Rietveld analysis. Pr2Ir2O7 crystallize in cubic crystallographic phase with Fd-3m space group. Temperature dependent magnetization data does not show magnetic bifurcation down to 2 K. Electrical resistivity data of Pr2Ir2O7 exhibits metallic behavior throughout temperature range. Below 50 K, a small rise in resistivity data of Pr2Ir2O7 is observed down to 12 K.

  8. Immunoreactivity of specific epitopes of PrPSc is enhanced by pretreatment in a hydrated autoclave.

    Science.gov (United States)

    Yokoyama, T; Momotani, E; Kimura, K; Yuasa, N

    1996-01-01

    An abnormal protein (PrPSc) accumulates in animals affected with scrapie. Immunoblotting procedures have been used widely to detect PrPSc. Blotted membranes were subjected to pretreatment in a hydrated autoclave, and the subsequent immunoreactivity of PrPSc was examined. The immunoreactivity of PrPSc to antisera against the synthetic peptides of the mouse PrP amino acid sequences 199 to 208 and 213 to 226 was enhanced by the pretreatment. However, the reactivity to antisera of peptide sequences 100 to 115 and 165 to 174 was not affected. The antibody-binding ability of the specific epitopes which are located close to the C-terminal end of PrP27-30 the proteinase-resistant portion of PrPSc, was enhanced by pretreatment in a hydrated autoclave. This pretreatment increased the sensitivity of PrPSc, and it would be useful for diagnosis of scrapie. PMID:8807215

  9. Préface

    Science.gov (United States)

    Chardonnet, Christian; Millot, Guy

    2006-10-01

    COLOQ, réunion nationale biennale initiée en 1988 par la communauté française des lasers, de l'optique non linéaire et de l'optique quantique atteint sa neuvième édition. Depuis sa création, les objectifs poursuivis sont les suivants : - réunir la communauté française des lasers, de l'optique non linéaire et de l'optique quantique, en dépassant les clivages fondamental/appliqué, recherche publique/industrielle, - faire le point sur les avancées récentes, - permettre aux jeunes chercheurs de se rencontrer, de s'exprimer et de s'aguerrir au plan national. Le but est que tout thésard du domaine de l'optique puisse participer à COLOQ une fois durant sa thèse, présenter son travail et de se confronter à la communauté de l'optique. COLOQ9 s'est tenu, pour sa 9e édition, sur le campus universitaire de Dijon, du 7 au 9 septembre 2005. Il a été une grande réussite : nombre de participants (255) et de présentations scientifiques record (148 affiches), forte représentation des industriels (15) et participation d'environ 200 lycéens aux conférences grand public. Le nombre plus élevé que prévu d'affiches a rendu un peu serrée leur présentation : une attention particulière sera portée à cet aspect lors des prochaines éditions. Ces journées ont été consacrées à des conférences invitées données par des scientifiques de haut niveau et à des présentations sous forme d'affiches. Une plage de temps importante a été réservée pour des discussions autour des affiches. À proximité immédiate de la salle de conférence, l'exposition de matériels spécialisés pour les lasers, l'optique et l'optoélectronique a été une occasion pour les jeunes participants de découvrir et contacter les industriels et les autres grands acteurs de l'optique. L'année 2005 ayant été l'année mondiale de la physique, COLOQ9 a retenu comme thème central ”1905-2005 : à propos d'Einstein". Plusieurs grandes conférences ont été dédiées à ce th

  10. Présentation

    OpenAIRE

    Stéphane Haber; Emmanuel Renault; Alexandre Dupeyrix

    2010-01-01

    Les articles réunis dans ce dossier de la revue Astérion portent sur la première génération de la Théorie critique (dont Max Horkheimer, Walter Benjamin, Theodor W. Adorno, Herbert Marcuse et Erich Fromm constituent sans doute les figures principales). Ils se concentrent plus précisément sur les contributions philosophiques qui marquèrent la période ouverte par l’accession de Horkheimer à la direction de l’Institut de recherches sociales (1931) et close par la publication en 1944 de Dialektik...

  11. Présentation

    Directory of Open Access Journals (Sweden)

    Stéphane Haber

    2010-08-01

    Full Text Available Les articles réunis dans ce dossier de la revue Astérion portent sur la première génération de la Théorie critique (dont Max Horkheimer, Walter Benjamin, Theodor W. Adorno, Herbert Marcuse et Erich Fromm constituent sans doute les figures principales. Ils se concentrent plus précisément sur les contributions philosophiques qui marquèrent la période ouverte par l’accession de Horkheimer à la direction de l’Institut de recherches sociales (1931 et close par la publication en 1944 de Dialektik...

  12. Superhard MgB sub 2 bulk material prepared by high-pressure sintering

    CERN Document Server

    Ma, H A; Chen, L X; Zhu, P W; Ren, G Z; Guo, W L; Fu, X Q; Zou Guang Tian; Ren, Z A; Che, G C; Zhao, Z X

    2002-01-01

    Superhard MgB sub 2 bulk material with a golden metallic shine was synthesized by high-pressure sintering for 8 h at 5.5 GPa and different temperatures. Appropriate pressure and temperature conditions for synthesizing polycrystalline MgB sub 2 with high hardness were investigated. The samples were characterized by means of atomic force microscopy and x-ray diffraction. The Vickers hardness, bulk density, and electrical resistivity were measured at room temperature.

  13. Surface wear reduction of bulk solids handling equipment using bionic design

    OpenAIRE

    Chen, G.

    2017-01-01

    Bulk solids handling continues to play an important role in a number of industries. One of the issues during bulk solids handling processes is equipment surface wear. Wear results in high economic loss and increases downtime. Current wear reduction methods such as optimizing transfer conditions or using wear-resistant materials, have brought notable progress. Nevertheless, the wear loss is still significant. Therefore, new solutions for reducing the surface wear must be investigated.Because w...

  14. Bionic design methodology for wear reduction of bulk solids handling equipment

    OpenAIRE

    Chen, G.; Schott, D.L.; Lodewijks, G.

    2016-01-01

    Large-scale handling of particulate solids can cause severe wear on bulk solids handling equipment surfaces. Wear reduces equipment life span and increases maintenance cost. Examples of traditional methods to reduce wear of bulk solids handling equipment include optimizing transport operations and utilizing resistant materials. To our knowledge, the so-called bionic design has not been utilized. Bionic design is the application of biological models, systems, or elements to modern engineering....

  15. Cast bulk metallic glass alloys: prospects as wear materials

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.; Dogan, Omer N.; Shiflet, Gary J. (Dept. of Materials Science and Engineering, University of Virginia, Charlottesville, VA)

    2005-01-01

    Bulk metallic glasses are single phase materials with unusual physical and mechanical properties. One intriguing area of possible use is as a wear material. Usually, pure metals and single phase dilute alloys do not perform well in tribological conditions. When the metal or alloy is lightweight, it is usually soft leading to galling in sliding situations. For the harder metals and alloys, their density is usually high, so there is an energy penalty when using these materials in wear situations. However, bulk metallic glasses at the same density are usually harder than corresponding metals and dilute single phase alloys, and so could offer better wear resistance. This work will discuss preliminary wear results for metallic glasses with densities in the range of 4.5 to 7.9 g/cc. The wear behavior of these materials will be compared to similar metals and alloys.

  16. Coupling brane fields to bulk supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Parameswaran, Susha L. [Uppsala Univ. (Sweden). Theoretical Physics; Schmidt, Jonas [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2010-12-15

    In this note we present a simple, general prescription for coupling brane localized fields to bulk supergravity. We illustrate the procedure by considering 6D N=2 bulk supergravity on a 2D orbifold, with brane fields localized at the fixed points. The resulting action enjoys the full 6D N=2 symmetries in the bulk, and those of 4D N=1 supergravity at the brane positions. (orig.)

  17. Coupling brane fields to bulk supergravity

    International Nuclear Information System (INIS)

    Parameswaran, Susha L.

    2010-12-01

    In this note we present a simple, general prescription for coupling brane localized fields to bulk supergravity. We illustrate the procedure by considering 6D N=2 bulk supergravity on a 2D orbifold, with brane fields localized at the fixed points. The resulting action enjoys the full 6D N=2 symmetries in the bulk, and those of 4D N=1 supergravity at the brane positions. (orig.)

  18. Nanopatterned Bulk Metallic Glass Biosensors.

    Science.gov (United States)

    Kinser, Emily R; Padmanabhan, Jagannath; Yu, Roy; Corona, Sydney L; Li, Jinyang; Vaddiraju, Sagar; Legassey, Allen; Loye, Ayomiposi; Balestrini, Jenna; Solly, Dawson A; Schroers, Jan; Taylor, André D; Papadimitrakopoulos, Fotios; Herzog, Raimund I; Kyriakides, Themis R

    2017-12-22

    Nanopatterning as a surface area enhancement method has the potential to increase signal and sensitivity of biosensors. Platinum-based bulk metallic glass (Pt-BMG) is a biocompatible material with electrical properties conducive for biosensor electrode applications, which can be processed in air at comparably low temperatures to produce nonrandom topography at the nanoscale. Work presented here employs nanopatterned Pt-BMG electrodes functionalized with glucose oxidase enzyme to explore the impact of nonrandom and highly reproducible nanoscale surface area enhancement on glucose biosensor performance. Electrochemical measurements including cyclic voltammetry (CV) and amperometric voltammetry (AV) were completed to compare the performance of 200 nm Pt-BMG electrodes vs Flat Pt-BMG control electrodes. Glucose dosing response was studied in a range of 2 mM to 10 mM. Effective current density dynamic range for the 200 nm Pt-BMG was 10-12 times greater than that of the Flat BMG control. Nanopatterned electrode sensitivity was measured to be 3.28 μA/cm 2 /mM, which was also an order of magnitude greater than the flat electrode. These results suggest that nonrandom nanotopography is a scalable and customizable engineering tool which can be integrated with Pt-BMGs to produce biocompatible biosensors with enhanced signal and sensitivity.

  19. Fluctuation conductivity of polycrystalline Y{sub 1-x}Pr{sub x}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Jurelo, Alcione Roberto; Araujo, Celmir Lupack de; Siqueira, Ezequiel Costa [Universidade Estadual de Ponta Grossa, PR (Brazil). Dept. de Fisica; Cantao, Mauricio Pereira [Parana Univ., Curitiba, PR (Brazil). Centro Politecnico. LACTEC - Inst. de Tecnologia para o Desenvolvimento

    2005-09-15

    We studied the effect of superconducting fluctuations on the electrical conductivity of granular samples of Y{sub 1-x}Pr{sub x}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} superconductors, with x = 0.01, 0.03, 0.05, 0.07 and 0.10. Samples were prepared by the standard solid-state reaction technique, with two different types of calcination process, in air at 900 deg C ( x < 0.07 ) and in vacuum at 850 deg C ( 0.05 {<=} x {<=} 0.10 ). For the samples prepared in air, our results revealed a splitting of the bulk transition, denoted by T{sub C1} and T{sub C2}, besides the coherence transition. It was observed fluctuation regimes above the highest transition ( T{sub C1} ) and the lowest transition ( T{sub C2} ). For the samples calcinated in vacuum and high concentrations of Pr, changes were observed in the critical region with chemical substitution of the Pr ion for the Y ion. In the regime of approach to the zero resistance state it was observed an occurrence of a coherence transition for all concentrations of praseodymium. (author)

  20. Présentation

    Directory of Open Access Journals (Sweden)

    Myriam Catusse

    2012-02-01

    Full Text Available En 1996, paraissait dans la REMMM le tome « Machrek » d’une série d’études coordonnées par P.R. Baduel sur les partis politiques dans les pays arabes. Le second tome consacré au « Maghreb » devait être édité dans la foulée. En soi, l’entreprise était ambitieuse et finalement originale, puisqu’il s’agissait de réhabiliter cet objet classique de la sociologie politique qu’est le parti, dans la réflexion sur des sociétés où justement il avait été quelque peu disqualifié ou relégué au profit de l...

  1. Préface

    Directory of Open Access Journals (Sweden)

    Sylvie Duvillard

    2010-09-01

    Full Text Available Le moment est opportun, la question foncière est de retour, légitimée par presque une décennie (2001-2008 d’augmentation continue des prix de l’immobilier. De « sommets » , en articles de presse, la montagne et les Alpes en particulier font l’objet, dans ce domaine, d’une attention toute particulière. Le contexte est ici délicat. Les sociétés alpines sont partagées entre désir de préservation d’une forte identité montagnarde et crainte d’une « déprise » économique (agricole, touristique et/...

  2. Préface

    Directory of Open Access Journals (Sweden)

    Mathieu Petite

    2011-07-01

    Full Text Available De nombreux auteurs, depuis une quinzaine d’années, n’ont cessé de diagnostiquer une inflation patrimoniale (Choay, 1996 ; Rautenberg, 2003 ; Heinich, 2009 qu’ils ont attribué à l’élargissement considérable tant des types d’objets susceptibles d’être patrimonialisés que du champ temporel que ceux-ci pouvaient représenter. Ce numéro spécial de la Revue de géographie alpine s’intéresse à cet élargissement typologique et chronologique du patrimoine. Plus précisément, les quatre contributions s’...

  3. Préface

    Directory of Open Access Journals (Sweden)

    Hugues François

    2011-01-01

    Full Text Available Le changement climatique revêt en ce début de millénaire les habits de « mal du siècle » prédisant, à l’horizon 2100, un véritable cataclysme pour les sociétés humaines et leur organisation. Par delà le catastrophisme, les bouleversements induits par l’évolution du climat sur nos pratiques de gestion des territoires sont une réalité. Plus que de céder aux sirènes d’un discours alarmiste, il devient indispensable de se doter d’une meilleure connaissance des mécanismes de ces changements et d’e...

  4. Présentation

    Directory of Open Access Journals (Sweden)

    Arondel Vincent

    2002-01-01

    Full Text Available En juillet 2001, s’est tenu à Strasbourg un colloque de recherche sur les lipides des plantes. Nous présentons ici des articles correspondant à cinq des conférences qui y ont été données. Un point déterminant la qualité des huiles de plantes réside dans leur degré d’insaturation. Cette caractéristique est déterminée par des enzymes appelées désaturases et les gènes codant pour ces enzymes peuvent être utilisés comme marqueurs moléculaires….

  5. Présentation

    Directory of Open Access Journals (Sweden)

    Leger Claude-Louis

    2000-05-01

    Full Text Available Ce qui frappe aujourd’hui, c’est une évolution rapide des connaissances sur les quatre vitamines liposolubles qui font l’objet des revues générales présentées dans ce dossier, et plus particulièrement peut-être sur les vitamines A, D et E. On savait ces vitamines indispensables en raison de leur implication dans les réactions cellulaires, pas uniquement métaboliques d’ailleurs, mais on ne pouvait les soupçonner d’intervenir dans des phénomènes complexes touchant aux régulations cellulaires et à l’expression des gènes avant l’explosion des techniques de biologie moléculaire. Ces trois vitamines ont ainsi, entre autres, la capacité de réguler la prolifération et la différenciation cellulaire selon des mécanismes qui peuvent paraître différents aujourd’hui dans certains cas (pour la vitamine E par exemple, ou souvent proches (cas des vitamine A et D. Les quatre vitamines sont capables en revanche d’intervenir dans la mort cellulaire programmée (apoptose. Dans le cas du tissu osseux, ce sont les vitamines A, D et K qui agissent sur l’accrétion calcique. La vitamine E, quant à elle, pourrait prévenir, au moins théoriquement, l’ostéoporose.

  6. Isolation and characterization of a proteinase K-sensitive PrPSc fraction.

    Science.gov (United States)

    Pastrana, Miguel A; Sajnani, Gustavo; Onisko, Bruce; Castilla, Joaquín; Morales, Rodrigo; Soto, Claudio; Requena, Jesús R

    2006-12-26

    Recent studies have shown that a sizable fraction of PrPSc present in prion-infected tissues is, contrary to previous conceptions, sensitive to digestion by proteinase K (PK). This finding has important implications in the context of diagnosis of prion disease, as PK has been extensively used in attempts to distinguish between PrPSc and PrPC. Even more importantly, PK-sensitive PrPSc (sPrPSc) might be essential to understand the process of conversion and aggregation of PrPC leading to infectivity. We have isolated a fraction of sPrPSc. This material was obtained by differential centrifugation at an intermediate speed of Syrian hamster PrPSc obtained through a conventional procedure based on ultracentrifugation in the presence of detergents. PK-sensitive PrPSc is completely degraded under standard conditions (50 mug/mL of proteinase K at 37 degrees C for 1 h) and can also be digested with trypsin. Centrifugation in a sucrose gradient showed sPrPSc to correspond to the lower molecular weight fractions of the continuous range of oligomers that constitute PrPSc. PK-sensitive PrPSc has the ability to convert PrPC into protease-resistant PrPSc, as assessed by the protein misfolding cyclic amplification assay (PMCA). Limited proteolysis of sPrPSc using trypsin allows for identification of regions that are particularly susceptible to digestion, i.e., are partially exposed and flexible; we have identified as such the regions around residues K110, R136, R151, K220, and R229. PK-sensitive PrPSc isolates should prove useful for structural studies to help understand fundamental issues of the molecular biology of PrPSc and in the quest to design tests to detect preclinical prion disease.

  7. 27 CFR 20.191 - Bulk articles.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bulk articles. 20.191... Users of Specially Denatured Spirits Operations by Users § 20.191 Bulk articles. Users who convey articles in containers exceeding one gallon may provide the recipient with a photocopy of subpart G of this...

  8. Bulk-viscosity-driven asymmetric inflationary universe

    International Nuclear Information System (INIS)

    Waga, I.; Lima, J.A.S.; Portugal, R.

    1987-01-01

    A primordial net bosinic charge is introduced in the context of the bulk-viscosity-driven inflationary models. The analysis is carried through a macroscopic point of view in the framework of the causal thermodynamic theory. The conditions for having exponetial and generalized inflation are obtained. A phenomenological expression for the bulk viscosity coefficient is also derived. (author) [pt

  9. Bulk immunoassays for analysis of extracellular vesicles

    NARCIS (Netherlands)

    Coumans, Frank A. W.; Gool, Elmar L.; Nieuwland, Rienk

    2017-01-01

    There is increasing clinical interest in extracellular vesicles (EV) for diagnostic and treatment purposes. This review provides an overview of bulk immunoassays to analyse EV. Western blot and enzyme-linked immunosorbent assay are still the two predominant bulk immunoassays. Recently, new assays

  10. State diagram of Pr-Bi system

    International Nuclear Information System (INIS)

    Abulkhaev, V.L.; Ganiev, I.N.

    1994-01-01

    By means of thermal differential analysis, X-ray and microstructural analysis the state diagram of Pr-Bi system was studied. Following intermetallic compounds were defined in the system: Pr 2 Bi, Pr 5 Bi 3 , Pr 4 Bi 3 , Pr Bi, PrBi 2 , Pr 2 Bi, Pr 5 Bi 3 , Pr 4 Bi 3 and PrBi 2 . The data analysis on Ln-Bi diagram allowed to determine the regularity of change of properties of intermetallic compounds in the line of rare earth elements of cerium subgroup.

  11. Bulk metallic glasses and high entropy alloys for reprocessing applications

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.; Jayaraj, J.

    2016-01-01

    Recent breakthroughs in materials engineering have generated complex alloys that retain a glassy state in bulk form (bulk metallic glasses or BMGs) via ingot casting. High corrosion resistance is expected for BMGs (amorphous) as they are free from defects associated with the crystalline state such as grain boundaries, dislocations and stacking faults. Compared with conventional alloys containing one or two principal elements, the recently developed HEAs are usually composed of five or more elements with equimolar or near equimolar elemental fractions, which forms single solid solution phase. These HEAs exhibit excellent microstructural stability with better mechanical, wear and corrosion resistance properties as they are essentially single phase. Reprocessing of spent fuel from the fast breeder reactor involves the use of high concentration of (11.5 M) nitric acid under boiling conditions for the dissolution of the fuel. Conventional AISI type 304LSS and nitric acid grade 304L stainless steel would undergo inter-granular corrosion under these conditions and cannot be used for the fabrication of dissolver vessel. Currently titanium is used and zirconium alloys are proposed for future dissolver applications. Thus searching for newer materials with higher corrosion resistance suggests metallic glasses and HEAs for critical components of the dissolver application. Several Zr-based glassy alloys with different microstructural states and Ni-Nb based glassy alloys and TiZrHfNbTa HEA were cast and characterized for microstructure and corrosion resistance in nitric acid medium. From these studies, factors such as the corrosive environment (nitric acid, chloride and fluoride), and the presence of passivating elements in the alloy were emphasized for better corrosion resistance of BMGs and HEA. Attempts were also made to prepare coatings of Zr-and Ni-based glassy alloys on 304LSS by laser based deposition technique and their corrosion properties were evaluated. (author)

  12. Barebacking: condiciones de poder y prácticas de resistencia en la biopolítica de la Salud Sexual Barebacking: conditions of power and resistance practices on the biopolitics of Sexual Health

    Directory of Open Access Journals (Sweden)

    Rubén Manuel Ávila Rodríguez

    2011-10-01

    Full Text Available La mayoría de estudios sobre barebacking coinciden en definirlo como una práctica intencionada de sexo anal sin protección en 'hombres que tienen sexo con otros hombres' (HSH, lo que entra en contradicción con la multiplicidad de significados que adquiere este término para algunas de las personas que lo utilizan en primera persona. En este trabajo ofrecemos una mirada situada sobre la manera en que se configuran los significados del término bareback en narrativas de personas que lo practican. Esto nos permite desplazar las responsabilidades individuales de la práctica establecidas desde los principios que guían las políticas de salud sexual, a responsabilidades sociopolíticas de una actitud que sólo tiene sentido en el actual contexto de biopolítica de la salud sexual.
    Most of the studies agree barebacking can be defined as an intentional practice of unprotected anal sex in 'men who have sex with other men' (MSM, despite the multiplicity of meanings that this term takes to some of the people who use it first hand. In this paper we look located on the way the meanings of the term bareback shapes in narratives of people who practice it. This allows us to move from the individual responsibilities of a practice established since the guiding principles of sexual health policies to the socio-political responsibilities of an attitude that only makes sense in the current context of biopolitics of sexual health.

  13. Thermal conductivity of bulk GaN single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Jezowski, A.; Stachowiak, P.; Suski, T.; Krukowski, S.; Bockowski, M.; Grzegory, I.; Danilchenko, B

    2003-05-01

    We have measured thermal conductivity, {kappa}, in the wide temperature range 4-300 K of GaN bulk single crystals grown by high-pressure, high-temperature synthesis. Obtained results (1600 W/Km at 45 K) are the highest {kappa} values reported on GaN material. At the room temperature {kappa} is about 210 W/Km. The contributions to the GaN thermal resistance of Umklapp process, mass point defects as well as phonon scattering on dislocations and sample boundary are discussed.

  14. Restaurações inlays em cerâmicas feldspáticas injetadas em pré-molares: efeito da estratégia de cimentação e da ciclagem mecânica na resistência adesiva entre dentina e restauração

    OpenAIRE

    Feitosa, Sabrina Alves [UNESP

    2011-01-01

    O estudo avaliou o efeito da estratégia de cimentação e da ciclagem mecânica na resistência de união entre dentina e restauração. O tipo de falha dos espécimes foi classificado e a distribuição de tensões foi analisada pela simulação utilizando o método de análise por elementos finitos (MEF). Quarenta e oito (N= 48) pré-molares superiores foram preparados (cavidade tipo MOD) e 48 restaurações inlays de cerâmica feldspática foram obtidas. Os espécimes foram alocadas em 3 grupos, considerando a...

  15. Bulk equations of motion from CFT correlators

    Energy Technology Data Exchange (ETDEWEB)

    Kabat, Daniel [Department of Physics and Astronomy,Lehman College, City University of New York, Bronx NY 10468 (United States); Lifschytz, Gilad [Department of Physics and Astronomy,Lehman College, City University of New York, Bronx NY 10468 (United States); Physics Department,City College, City University of New York, New York NY 10031 (United States); Department of Mathematics and Physics,University of Haifa at Oranim, Kiryat Tivon 36006 (Israel)

    2015-09-10

    To O(1/N) we derive, purely from CFT data, the bulk equations of motion for interacting scalar fields and for scalars coupled to gauge fields and gravity. We first uplift CFT operators to mimic local AdS fields by imposing bulk microcausality. This requires adding an infinite tower of smeared higher-dimension double-trace operators to the CFT definition of a bulk field, with coefficients that we explicitly compute. By summing the contribution of the higher-dimension operators we derive the equations of motion satisfied by these uplifted CFT operators and show that we precisely recover the expected bulk equations of motion. We exhibit the freedom in the CFT construction which corresponds to bulk field redefinitions.

  16. Xerophilic mycopopulations of teas in bulk

    Directory of Open Access Journals (Sweden)

    Škrinjar Marija M.

    2011-01-01

    Full Text Available d.o.o., Novi Sad AU Krunić Vesna J. AF EKOLd.o.o., Novi Sad KW teas % mould contamination % thermal treatment KR nema Other the water, tea is the most popular beverage in the world today. They are used for ages, in the beginning as refreshing drinks, and later more for their healing properties. Teas have been demonstrated to show antioxidative, anti-carcinogenic, and anti-microbial properties. Considering that the teas, during the production, are not treated with any temperature, there is high risk for contamination with different type of microorganisms, especially with moulds. Moulds are ubiquitously distributed in nature and their spores can be found in the atmosphere even at high altitudes and under favorable conditions of temperature and humidity, moulds grow on many commodities including cereals, oil seeds, nuts, herbs and spices. Most of them are potential producers of mycotoxins which present a real hazard to human health. The aim of this work was to investigate total mould count and to identify moulds isolated from teas in bulk, than from teas treated with hot, sterile, distilled water and from the tea filtrates. Tested teas were peppermint, sage, yarrow, black tea, bearberry, lemon balm, mixture of teas from Zlatibor. In teas in balk was observed high contamination with different kinds of moulds (1.84-4.55 cfu/g, such as Aspergillus awamori, A. lovaniensis, A niger, A. phoenicus, A. repens, A. restrictus, A. sydowii, A. versicolor, Eurotium amstelodami, E. chevalieri, E. herbariorum, Penicillium chrysogenum, and Scopulariopsis brevicaulis. The most frequent were species from Aspergillus and Eurotium genera. Thermal treatment with hot, sterile, distilled water reduced the number of fungal colonies. Aspergillus awamori was the most resistant and appeared in six samples of filtrates of tea, Aspergillus niger in one sample and Penicillium chrysogenum in one sample.

  17. Novel Method for Simultaneous Quantification of Phenotypic Resistance to Maturation, Protease, Reverse Transcriptase, and Integrase HIV Inhibitors Based on 3′Gag(p2/p7/p1/p6)/PR/RT/INT-Recombinant Viruses: a Useful Tool in the Multitarget Era of Antiretroviral Therapy▿†

    Science.gov (United States)

    Weber, Jan; Vazquez, Ana C.; Winner, Dane; Rose, Justine D.; Wylie, Doug; Rhea, Ariel M.; Henry, Kenneth; Pappas, Jennifer; Wright, Alison; Mohamed, Nizar; Gibson, Richard; Rodriguez, Benigno; Soriano, Vicente; King, Kevin; Arts, Eric J.; Olivo, Paul D.; Quiñones-Mateu, Miguel E.

    2011-01-01

    Twenty-six antiretroviral drugs (ARVs), targeting five different steps in the life cycle of the human immunodeficiency virus type 1 (HIV-1), have been approved for the treatment of HIV-1 infection. Accordingly, HIV-1 phenotypic assays based on common cloning technology currently employ three, or possibly four, different recombinant viruses. Here, we describe a system to assess HIV-1 resistance to all drugs targeting the three viral enzymes as well as viral assembly using a single patient-derived, chimeric virus. Patient-derived p2-INT (gag-p2/NCp7/p1/p6/pol-PR/RT/IN) products were PCR amplified as a single fragment (3,428 bp) or two overlapping fragments (1,657 bp and 2,002 bp) and then recombined into a vector containing a near-full-length HIV-1 genome with the Saccharomyces cerevisiae uracil biosynthesis gene (URA3) replacing the 3,428 bp p2-INT segment (Dudley et al., Biotechniques 46:458–467, 2009). P2-INT-recombinant viruses were employed in drug susceptibility assays to test the activity of protease (PI), nucleoside/nucleotide reverse transcriptase (NRTI), nonnucleoside reverse transcriptase (NNRTI), and integrase strand-transfer (INSTI) inhibitors. Using a single standardized test (ViralARTS HIV), this new technology permits the rapid and automated quantification of phenotypic resistance for all known and candidate antiretroviral drugs targeting all viral enzymes (PR, RT, including polymerase and RNase H activities, and IN), some of the current and potential assembly inhibitors, and any drug targeting Pol or Gag precursor cleavage sites (relevant for PI and maturation inhibitors) This novel assay may be instrumental (i) in the development and clinical assessment of novel ARV drugs and (ii) to monitor patients failing prior complex treatment regimens. PMID:21628544

  18. Interplay between structure and magnetism in HoxPr1-x alloys. 1. Neutron scattering

    DEFF Research Database (Denmark)

    Goff, J.P.; Bryn-Jacobsen, C.; McMorrow, D.F.

    1998-01-01

    The structural and the magnetic ordering in thin-film HoxPr1-x alloys have been studied using neutron-and x-ray-diffraction techniques. As the concentration of Ho decreases the alloys adopt hexagonal-close-packed (hcp), Sm, and double hexagonal-close-packed (dhcp) crystal structures. The results...... show enhanced occupation of the cubic sites by Pr in the Sm and dhcp phases. The magnetic behavior is found to be very different in the three crystalline phases. The hcp samples form basal-plane spirals and the alloys with the Sm structure form a commensurate magnetic structure with the same...... periodicity as the magnetic order on the hexagonal sites in Sm metal, but the moments are confined to the basal plane. At low temperatures both Ho and Pr are found to adopt their full saturation moments in these phases. A Pr thin film is found to order with a similar magnetic structure to bulk Pr. However...

  19. Préface

    Science.gov (United States)

    Mazière, D.

    2002-04-01

    Faisant suite aux deux précédents colloques "Matériaux pour les machines thermiques" et "Matériaux pour le nucléaire" , le colloque 2001 de l'INSTN intitulé "Matériaux pour les énergies propres" s'est focalisé sur les problèmes de matériaux encore à résoudre dans ce secteur industriel. Le colloque de métallurgie est traditionnellement organisé par des ense ignants du DEA Métallurgie et Matériaux et un comité scientifique choisi chaq ue année en liaison avec le thème traité. Les étudiants de ce DEA, qui est hab ilité entre Paris XI, Paris VI, l'Ecole des Mines de Paris, l'Ecole Centrale de Pari s et l'INSTN, sont invités à participer à ce colloque et aux débats scientifiques qui s'y déroulent. Des conférences invitées à caractère péda gogique permettent d'introduire les différents thèmes abordés qui sont ensuite développés dans des présentations plus novatrices. Cette manifestation a pour ambition de favoriser la rencontre de scientifiques d'horizons divers venant de milieux académiques ou industriels entre eux et avec les étudiants et thésards. Cette 44e édition, dont les comptes rendus sont publiés ici, a fait le point sur les problèmes de matériaux rencontrés lors de la production, du stockage et de la conversion des énergies dites propres en englobant lesprogrès constants des industriels de l'automobile. Ce colloque a réuni, du 26 au 28 juin 2001, 63 participants provenant d'universités ou grandes écoles (18), du CEA (17), du CNRS (10) et de l'industrie ou de centres de recherche associés. L'ensemble des problèmes de matériaux de ce secteur ont été examinés au cours des six sessions ci-dessous : dépollution des gaz d'échappement ; combustion catalytique en production thermique ; nouvelles batteries ; piles à combustibles ; production et stockage d'hydrogène ; production et stockage d'énergie solaire. Vingt huit communications dont vingt deux orales ont illustré les dével oppements en cours. Dix

  20. Prólogo

    Directory of Open Access Journals (Sweden)

    Alta Hooker

    2013-02-01

    Full Text Available Este volumen No. 11 presenta una compilación estructurada en 6 secciones temáticas las cuales comprenden 9 artículos. La primera sección en Educación, presenta los artículos: Métodos de enseñanza de Física en la modalidad a distancia en el instituto sabatino “Esperanza”,en el municipio de Siuna; y, Comportamiento disciplinario en la escuela “Niño Jesús”, Siuna, Región Autónoma Atlántico Norte, 2011. La segunda sección, titulada Educación Superior en la Costa Caribe Nicaragüense presenta los artículos: Formación de los docentes de la URACCAN en el Área de Recursos Naturales; asimismo, Pertinencia de los programas para el aprendizaje del inglés en Administración de Empresas, Recinto Nueva Guinea y Prácticas de campo en la formación de estudiantes de Ingeniería en Zootecnia, URACCAN Nueva Guinea. La tercera sección denominada Revitalización Lingüística y Cultural comprende dos artículos: Etno-matemática en indígenas ulwas, comunidad de Karawala, Región Autónoma Atlántico Sur, Nicaragua y Ma-Kuagro: Elementos de la cultura de San Basilio Palenque, Colombia, y su incidencia en las prácticas pedagógicas. La cuarta sección Cultura Indígena y Afrodescendiente comprende un artículo: Economía indígena en la comunidad de Wasakín, municipio de Rosita, RAAN. Clausura la quinta sección denominada Ciencias Sociales, el artículo La república Bolivariana de Venezuela y Nicaragua, en el marco del acuerdo energético.

  1. PR's involvement in International Cooperation

    NARCIS (Netherlands)

    Anonymous,

    1995-01-01

    In The Netherlands, the Research Station for Cattle, Sheep and Horse Husbandry (in Dutch abbreviated as PR) bridges the gap between more basic and disciplinary research done at universities and research institutes on the one hand and the extension service and the farmers on the other hand. The PR

  2. Comparison between TRMM PR and

    Indian Academy of Sciences (India)

    . In this study a detailed diagnosis of rainfall over SA during the 1997/98 El Ni˜no and 1998/99 La Ni˜na events using TRMM PR data was made. The potentialities and limitations of TRMM PR data were evaluated comparing with rain gauge ...

  3. “De Westeros no #vemprarua à shippagem do beijo gay na TV brasileira”. Ativismo de fãs: conceitos, resistências e práticas na cultura digital

    Directory of Open Access Journals (Sweden)

    Adriana Amaral

    2015-06-01

    Full Text Available "From Westeros' #vemprarua to the shipping of the gay kiss on brazilian TV". Fan activism: concepts, resistances and practices in digital culture. – From a creative and cultural perspective fan activism is a form of resistance. In this paper, we seek to reflect upon the mobilization of these groups of fans towards their idols, as well as discussing how the search for privacy and closeness in the relationship between celebrities and their fans foster a number of activities that shape, (re define and transcend the boundaries of fandom. We observe, from a theoretical reflexion about such phenomena and from the discussion of everyday life examples, how the rich universe of digital practices and its productions - fanfics, fanvids, fanzines, etc. - create sociocultural events such as the ‘rolezinho’, crowdfunding, fanmades in protests, offering new meanings to what we understand as resistance and problematizing the duality between the ‘world of consumption and pop culture’ and the ‘world of citizenship’.

  4. Do-it-yourself bulk handling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-02-01

    Vessels with self-unloading gear are nothing new. But the self-unloader concept has wider potential in coal handling as the work and the vision of one of the world's leading designers of self-unloading vessels shows. Seabulk Systems Inc. has worked on self-unloaders since 1989 and has gone on to develop the semi-submersible transhipment vessel (SST), the Sea Bulk Transhipper vessel (SST), the Sea Bulk Transhipper (SBT), the Catamaran Transfer Vessel (CTV) the Seabulk Cape Unloader (CSU), and the transhipment barge - the Sea Bulk Transfer Vessel (STV). 6 photos.

  5. Modelling of stationary bulk hydrogen storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Venter, R.D.; Pucher, G. [Centre for Hydrogen and Electrochemical Studies (CHES), University of Toronto (Canada)

    1997-08-01

    The employment of bulk hydrogen storage systems within industry appears increasingly to be a near-term prospect given the steadily increasing levels of hydrogen production. The current study defines and outlines a cost model through which comparative and informative assessments of different stationary bulk hydrogen storage reservoir types can be made. The reservoir types investigated include: mined salt caverns, depleted natural gas reservoirs and liquid vessels. Using the model, cost of storage for these potential bulk hydrogen containment technologies is estimated and compared in qualitative terms. for similar storage applications. (Author)

  6. Bulk viscosity in holographic Lifshitz hydrodynamics

    International Nuclear Information System (INIS)

    Hoyos, Carlos; Kim, Bom Soo; Oz, Yaron

    2014-01-01

    We compute the bulk viscosity in holographic models dual to theories with Lifshitz scaling and/or hyperscaling violation, using a generalization of the bulk viscosity formula derived in arXiv:1103.1657 from the null focusing equation. We find that only a class of models with massive vector fields are truly Lifshitz scale invariant, and have a vanishing bulk viscosity. For other holographic models with scalars and/or massless vector fields we find a universal formula in terms of the dynamical exponent and the hyperscaling violation exponent

  7. Préface

    Science.gov (United States)

    Ouerdane, Youcef; Laporte, Pierre

    2005-06-01

    L'objectif de la série de colloques UVX est de réunir, au rythme d'une fois tous les deux ans, les scientifiques et industriels travaillant dans le domaine du développement des sources de photon de grande énergie (UV, VUV, et X) et de leurs applications. En particulier cette manifestation est l'occasion de faire se rencontrer une communauté très pluridisciplinaire (physique, chimie, biologie, sciences de l'univers) liée à des domaines en forte évolution technologique (lasers et rayonnement synchrotron notamment). Le colloque UVX 2004 s'est tenu au Palais des Congrès de Saint-Étienne (42000) du 7 au 11 juin 2004. La période écoulée depuis l'édition précédente (Oléron 2002) a été particulièrement active dans tous les domaines concernés : grands projets de sources, méthodes de diagnostic au sens large. Une nouvelle fois on constate que le bref et l'ultra-bref ont une place privilégiée, qu'il s'agisse du travail sur les accélérateurs ou sur les lasers qui, bien sûr, dans la course aux temps courts remportent la palme avec la présence de spécialistes du domaine attoseconde. La communauté représentée a la chance d'être en prise directe avec de très grands projets en phase active de réalisation comme le Laser Megajoule (LMJ), la source SOLEIL, et un projet d'ampleur plus modeste mais remarquable dans son domaine : la source LASERIX d'Orsay/Palaiseau. On pourra citer aussi le projet Arc en Ciel qui, lui, est encore au stade de sa définition. - SOLEIL, source de nouvelle génération de rayonnement synchrotron (plateau de Saclay) est dans une phase active de réalisation : achèvement de l'infrastructure en 2005 et injection du 1o faisceau dans l'anneau de stockage prévu également en 2005. Cette source devrait être la meilleure au monde dans le domaine VUV/X mous, tout en restant très polyvalente (brillance, accordabilité, structure temporelle, polarisation) et complémentaire de l'ESRF. Au final on disposera de 21 lignes de lumi

  8. Préface

    Science.gov (United States)

    Rozelot, J.-P.; Bijaoui, A.

    2002-03-01

    Ce livre reprend pour l'essentiel des cours qui ont été dispensées lors de deux Écoles thématiques réalisées avec le concours du CNRS. La première fait partie du cycle des Écoles d'Astrophysique Solaire d'Oléron (F), dont le succès est grandissant dans la communauté concernée. La seconde s'est tenue spécifiquement à La Grande Motte près de Montpellier (F). L'objectif de ces Écoles, qui se sont tenues à une année d'intervalle, était de donner aux chercheurs concernés, qu'ils soient du secteur des Sciences de l'Univers ou de celui des Sciences pour l'Ingénieur, une formation aux nouvelles méthodes d'analyses de données, afin de leur faire bien comprendre l'intérêt de ces nouveaux outils pour la résolution de leurs problèmes scientifiques. En effet, les chercheurs disposent d'une quantité de plus en plus grande d'informations obtenues grâce aux très nombreux observatoires spatiaux et au sol. Pour l'analyse de ces données, des logiciels complexes ont été mis au point et distribués dans les laboratoires. Grâce au réseau, chacun peut extraire d'une banque de données les signaux ou les images observées, les réduire avec des programmes disposant d'une documentation élaborée et obtenir des résultats scientifiques pertinents. Mais les chercheurs sont souvent limités dans leurs connaissances pour aborder les problèmes d'analyse des données, et ils sont perplexes devant le choix de l'algorithme a utiliser. L'analyse des données est une discipline vaste, ayant justement pour tâche de permettre l'extraction des informations pertinentes des observations. La formation à ces méthodes contemporaines, formation qui a été proposée et est relatée dans ce livre, permet à chacun de mieux concevoir sa stratégie d'analyse pour pouvoir ainsi choisir les programmes de manière judicieuse. Cet ouvrage, novateur, se veut d'offrir de nouvelles idées et d'ouvrir de nouvelles voies. Il est divisé en trois grandes parties qui permettent au

  9. Préface

    Science.gov (United States)

    Cornet, Alain

    2004-11-01

    Le premier colloque Rayons X et Matière (Rx 95) s'est tenu à Strasbourg en 1995. Il était destiné à célébrer le centenaire de la découverte des rayons X par ROENTGEN et a alors réuni plus de cent trente chercheurs et industriels concernés par les rayons X et les matériaux. Parmi eux se trouvaient les Professeurs André GUINIER et Hans NEFF ainsi que Monsieur Michel BRUNEL qui hélas ne sont plus parmi nous à ce jour. La qualité et la convivialité des échanges entre les participants lors de cette première réunion ne pouvaient que nous inciter à la reconduire et nous avons pris rendez vous pour 1997, puis 1999, puis 2001 et enfin pour 2003, soient cinq colloques, un tous les deux ans pendant dix ans. Au cours des années, nous avons essayé d'adapter les thèmes abordés à l'évolution de la recherche et des techniques. Ces thèmes se sont naturellement ajoutés aux thèmes classiques comme la diffraction et la fluorescence. Les nanomatériaux, les microfaisceaux en sont des exemples. A de très rares exceptions les communications présentées étaient de très bon niveau et nous avons toujours eu beaucoup de plaisir à les publier. Ces colloques ont bien fonctionné en raison de la participation des industriels qui, dans leur grande majorité, nous ont accompagnés régulièrement. Ces colloques présentent l'avantage, par rapport à des colloques spécialisés, de couvrir (presque) tout le champ des applications des rayons X et seulement ce domaine. Toutefois il est clair que les données économiques évoluent et que la situation est chaque aimée plus difficile pour tout le monde, chercheurs et industriels. Temps et moyens sont comptés et maintenant chacun doit faire de plus en plus de choix, rentabilité oblige ! Le maintien du colloque Rayons X et Matière passera obligatoirement par une réflexion globale : redéfinition des objectifs, augmentation de l'ouverture européenne, recherche d'autres formes de participation associant mieux les

  10. Prólogo

    Directory of Open Access Journals (Sweden)

    Alta Suzzane Hooker Blandford

    2017-08-01

    Full Text Available Este volumen No. 20, presenta una compilación estructurada en 5 secciones, las cuales comprenden 9 artículos, en el área de Educación: Estrategias de evaluación en la enseñanza de los algoritmos de factorización en noveno grado de Educación Secundaria. La segunda sección, en Ciencias Sociales: 2 Alianza estratégica entre Venezuela y Nicaragua para la construcción de una refinería petrolera; 3 Breves consideraciones sobre el código aduanero del MERCOSUR (CAM. Fuentes y antecedentes de creación; 4. Plan de Desarrollo Municipal como herramienta de gestión pública de la ciudad de Siuna, Costa Caribe Norte de Nicaragua. En la tercera sección, Salud: 5 Hombres creole y cáncer de próstata en Bluefields, Costa Caribe Sur de Nicaragua. En la cuarta sección, Recursos Naturales y Medio Ambiente: 6 Calidad del agua potable y su efecto en la salud de la comunidad de Kamla, Costa Caribe Norte de Nicaragua; 7 Gobernanza forestal en el territorio Twi Waupasa, Costa Caribe Norte de Nicaragua. En la quinta sección, Agropecuaria: 8 Germinación del coco (Cocos nucifera, utilizando tres tipos de cortes en Sandy Bay Sirpi, Costa Caribe Sur de Nicaragua; 9 Manejo de pastizales en sistemas de producción ganaderos de Nueva Guinea, Costa Caribe Sur de Nicaragua  Los resultados de estas investigaciones aportan significativamente a la praxis in- novadora de la comunidad universitaria, y constituyen un medio educativo y de comunicación para compartir con la comunidad de profesores, investigadores y estudiantes del mundo, en una expresión crítica, autónoma y de emancipación en un ambiente de interculturalidad.

  11. Présentation

    Directory of Open Access Journals (Sweden)

    Marie-Hélène Zérah

    2011-11-01

    Full Text Available Ce court texte présente ce numéro spécial sur les villes indiennes et fournit des éléments de contexte pour situer les cinq contributions qui le composent. Avant d'aborder la période actuelle, un survol des politiques urbaines menées dans les décennies suivant l'indépendance souligne le rôle ambigu de la ville dans le modèle indien de développement ainsi que la relative négligence des questions urbaines jusqu'aux années 1980. Dans les années 1990, l'Inde a adopté deux réformes majeures, qui toutes deux ont eu un fort impact sur les villes : la libéralisation économique, d’une part, et la décentralisation politique via un amendement constitutionnel, d’autre part. La libéralisation économique a catalysé un processus de restructuration importante dans les métropoles, soudain perçues comme des atouts précieux pour l'implication de l'Inde dans l'économie mondiale. Cette évolution a soulevé des questions difficiles de gouvernance, notamment parce que les visions de la ville portées par les décideurs politiques prennent mal en compte la complexité des dynamiques sociales et la persistance d’un taux élevé de pauvreté ; les classes moyennes urbaines ont bénéficié plus directement de la croissance économique rapide, ce qui alimente le consumérisme et le marché immobilier. Quant à la décentralisation politique, elle n'a pas produit les résultats attendus, en partie parce que les gouvernements régionaux rechignent à accroître les capacités financières des municipalités. Une analyse critique de la mission nationale pour le renouvellement urbain (JNNURM montre que, même si cette dernière a indéniablement contribué au financement des infrastructures urbaines, elle a été beaucoup moins efficace pour ce qui est de l’amélioration de la gouvernance urbaine. Enfin, les cinq articles de ce numéro sont présentés et l’attention est attirée sur le fait que trois d’entre eux sont rédigés par

  12. Political PR is dying. Long live business PR! / Ilyn Oleg

    Index Scriptorium Estoniae

    Oleg, Ilyn

    2005-01-01

    Vene suurima suhtekorraldusagentuuri Imageland Public Relations rahvusvaheliste suhete juhi hinnangul on Venemaal peamisteks probleemideks PR professionaalide vähesus, nende kehv haritus oma erialal, samuti vähene teadlikkus suhtekorralduse tähtsusest äris

  13. Superconducting bulk magnets for magnetic levitation systems

    Science.gov (United States)

    Fujimoto, H.; Kamijo, H.

    2000-06-01

    The major applications of high-temperature superconductors have mostly been confined to products in the form of wires and thin films. However, recent developments show that rare-earth REBa 2Cu 3O 7- x and light rare-earth LREBa 2Cu 3O 7- x superconductors prepared by melt processes have a high critical-current density at 77 K and high magnetic fields. These superconductors will promote the application of bulk high-temperature superconductors in high magnetic fields; the superconducting bulk magnet for the Maglev train is one possible application. We investigated the possibility of using bulk magnets in the Maglev system, and examined flux-trapping characteristics of multi-superconducting bulks arranged in array.

  14. Technical specifications for the bulk shielding reactor

    International Nuclear Information System (INIS)

    1986-05-01

    This report provides information concerning the technical specifications for the Bulk Shielding Reactor. Areas covered include: safety limits and limiting safety settings; limiting conditions for operation; surveillance requirements; design features; administrative controls; and monitoring of airborne effluents. 10 refs

  15. Effects of bulk and surface conductivity on the performance of CdZnTe pixel detectors

    DEFF Research Database (Denmark)

    Bolotnikov, A.E.; Chen, C.M.H.; Cook, W.R.

    2002-01-01

    We studied the effects of bulk and surface conductivity on the performance of high-resistivity CdZnTe (CZT) pixel detectors with Pt contacts. We emphasize the difference in mechanisms of the bulk and surface conductivity as indicated by their different temperature behaviors. In addition...... with two back-to-back Schottky-barrier contacts. The high-surface leakage. current is apparently due to the presence of a low-resistivity surface layer that has characteristics that differ considerably from those of the bulk material. This surface layer has a profound effect on the charge......-collection efficiency in detectors with multicontact geometry; some fraction of the electric field lines that originated on the cathode intersects the surface areas between the pixel contacts where the charge produced by an ionizing particle gets trapped. To overcome this effect, we place a grid of thin electrodes...

  16. Technique of Critical Current Density Measurement of Bulk Superconductor with Linear Extrapolation Method

    International Nuclear Information System (INIS)

    Adi, Wisnu Ari; Sukirman, Engkir; Winatapura, Didin S.

    2000-01-01

    Technique of critical current density measurement (Jc) of HTc bulk ceramic superconductor has been performed by using linear extrapolation with four-point probes method. The measurement of critical current density HTc bulk ceramic superconductor usually causes damage in contact resistance. In order to decrease this damage factor, we introduce extrapolation method. The extrapolating data show that the critical current density Jc for YBCO (123) and BSCCO (2212) at 77 K are 10,85(6) Amp.cm - 2 and 14,46(6) Amp.cm - 2, respectively. This technique is easier, simpler, and the use of the current flow is low, so it will not damage the contact resistance of the sample. We expect that the method can give a better solution for bulk superconductor application. Key words. : superconductor, critical temperature, and critical current density

  17. Molecular Characteristics and Biochemical Functions of VpPR10s from Vitis pseudoreticulata Associated with Biotic and Abiotic Stresses

    Directory of Open Access Journals (Sweden)

    Lan Wang

    2014-10-01

    Full Text Available Grapes are one of the world’s oldest and most important fruit crops. They are of high economic value in many countries, but the susceptibility of the dominant winegrape species Vitis vinifera to fungal disease is a significant problem. The Chinese wild grape species are a rich source of disease-resistance genes and these can be used to discover how disease resistance in V. vinifera grapevines might be enhanced. Pathogenesis-related (PR 10 proteins are involved in the disease-response. Here, we use the genomic DNA of the Chinese wild species Vitis pseudoreticulata accession “Baihe-35-1” as the template to design specific primers based on VvPR10s sequences. We used overlap extension PCR to obtain the sequences: VpPR10.4, VpPR10.6, VpPR10.7 and VpPR10.9. The coding sequences of the VpPR10s were then cloned into the pGEX-4T-1 vector. The purified proteins VpPR10.4, VpPR10.6, VpPR10.7 and VpPR10.9 were used to analyse nuclease activity. Meanwhile, functional analysis of VpPR10s under different biotic and abiotic stresses was carried out to further clarify the disease-resistance mechanisms of the Chinese wild grapevine VpPR10 genes. The analysis of protein structure indicates that VpPR10.4 and VpPR10.7 had the P-loop domain and the Bet v 1 motif, which are a consistent feature of plant PR10. However, there was no P-loop domain or Bet v 1 motif in VpPR10.9 and we could not find the Bet v 1 motif in VpPR10.6. The results of the nuclease activity assay and of the functional analyses of VpPR10s under different biotic and abiotic stresses also confirm that VpPR10.4 and VpPR10.7 proteins have marked RNase, DNase, anti-fungal activities and respond to abiotic stresses. The VpPR10.6 and VpPR10.9 proteins do not have these activities and functions.

  18. Erfolgsfaktoren unternehmerischer Krisen-PR

    OpenAIRE

    Scharr, Florian

    2006-01-01

    Ob "Peanuts", "Elchtest" oder "Hoechst-Störfall" - bei diesen bekannten Öffentlichkeitskrisen der letzten Jahre rief die mangelhafte Krisen-PR der betroffenen Unternehmen bei Medien und Bevölkerung mehr Empörung hervor als die originären Auslöser und potenzierte so den entstandenen Vertrauensverlust. Auch die sich gerade erst entwickelnde PR-Forschung bietet noch keine konkrete Hilfestellung zur Gestaltung von Krisen-PR. Mit dem bedeutenden Diskurs- und dadurch Realitätsgestaltungsmittel Pres...

  19. Bulk Velocities and Orbits of Open Clusters

    Science.gov (United States)

    Frinchaboy, Peter M.; Chojnowski, D.

    2011-01-01

    We present bulk 3D dynamics for 10+ northern hemisphere open clusters. Utilizing WIYN/Hydra multi-fiber spectroscopic observations and Tycho and/or UCAC-3 proper motions, we determine cluster membership and bulk velocities. Cluster velocities are used to derive cluster orbits with comparison to previous studies. This work was partially supported by an NSF Astronomy and Astrophysics Postdoctoral Fellowship under award AST-0602221 and by a TCU SERC grant

  20. ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI

    Directory of Open Access Journals (Sweden)

    Azizul Khakim

    2015-10-01

    Full Text Available ABSTRAK ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI. Bulk shielding merupakan fasilitas yang terintegrasi dengan reaktor Kartini yang berfungsi sebagai penyimpanan sementara bahan bakar bekas. Fasilitas ini merupakan fasilitas yang termasuk dalam struktur, sistem dan komponen (SSK yang penting bagi keselamatan. Salah satu fungsi keselamatan dari sistem penanganan dan penyimpanan bahan bakar adalah mencegah kecelakaan kekritisan yang tak terkendali dan membatasi naiknya temperatur bahan bakar. Analisis keselamatan paling kurang harus mencakup analisis keselamatan dari sisi neutronik dan termo hidrolik Bulk shielding. Analisis termo hidrolik ditujukan untuk memastikan perpindahan panas dan proses pendinginan bahan bakar bekas berjalan baik dan tidak terjadi akumulasi panas yang mengancam integritas bahan bakar. Code tervalidasi PARET/ANL digunakan untuk analisis pendinginan dengan mode konveksi alam. Hasil perhitungan menunjukkan bahwa mode pendinginan konvekasi alam cukup memadai dalam mendinginkan panas sisa tanpa mengakibatkan kenaikan temperatur bahan bakar yang signifikan. Kata kunci: Bulk shielding, bahan bakar bekas, konveksi alam, PARET.   ABSTRACT THERMAL HYDRAULIC SAFETY ANALYSIS OF BULK SHIELDING KARTINI REACTOR. Bulk shielding is an integrated facility to Kartini reactor which is used for temporary spent fuels storage. The facility is one of the structures, systems and components (SSCs important to safety. Among the safety functions of fuel handling and storage are to prevent any uncontrolable criticality accidents and to limit the fuel temperature increase. Safety analyses should, at least, cover neutronic and thermal hydraulic calculations of the bulk shielding. Thermal hydraulic analyses were intended to ensure that heat removal and the process of the spent fuels cooling takes place adequately and no heat accumulation that challenges the fuel integrity. Validated code, PARET/ANL was used for analysing the

  1. Présentation

    Directory of Open Access Journals (Sweden)

    Gregor Perko

    2011-12-01

    Full Text Available Au cours des dernières décennies où l’on assiste à une refondation de la morphologie, la discipline s’intéresse de plus en plus à des phénomènes « périphériques », « marginaux », « irréguliers » ou « extragrammaticaux », à des phénomènes n’appartenant pas aux « régions nodales » de la morphologie. Le présent numéro de Linguistica, premier numéro thématique de notre revue, réunit des études qui s’intéres- sent aux frontières internes et externes de la morphologie. La diversité et la richesse des thèmes abordés et des approches proposées témoignent d’un intérêt croissant que les linguistes, non pas uniquement les morphologues, portent à cette thématique. Les articles proposés s’articulent autour de cinq axes majeurs. Un premier axe rassemble les articles qui étudient les frontières entre différentes composantes de la morphologie. L’étude de Michel Roché examine les contraintes lexicales et morphophonologiques sur le paradigme des dérivés en –aie. Les résultats de son analyse remettent en question la notion de « règle de construction des lexèmes ». Irena Stramljič Breznik et Ines Voršič se penchent sur les néologismes de sport en slovène et essaient d’évaluer la productivité ou la créativité des procédés morphologiques en jeu. Dans une étude d’inspiration cognitiviste, Alexandra Bagasheva aborde l’hétérogénéité des verbes composés en anglais. En s’appuyant sur les données fournies par les para- digmes verbaux du maltais, Maris Camilleri examine la complexité du phénomène de classes flexionnelles basées sur les radicaux. Trois travaux concernent des procédés typiquement « extragrammaticaux » servant à former le plus souvent des occasionnalismes: Arnaud Léturgie tente de dégager des propriétés prototypiques de l’amalgamation lexicale en français, notamment celles de la création des mots-valises; Silvia Cacchiani analyse, à l

  2. Kosmotropic anions promote conversion of recombinant prion protein into a PrPSc-like misfolded form.

    Directory of Open Access Journals (Sweden)

    Rodrigo Diaz-Espinoza

    Full Text Available Prions are self-propagating proteins involved in transmissible spongiform encephalopaties in mammals. An aberrant conformation with amyloid-like features of a cell surface protein, termed prion protein (PrP, is thought to be the essential component of the infectious particle, though accessory co-factor molecules such as lipids and nucleotides may be involved. The cellular co-factors and environmental conditions implicated in PrP misfolding are not completely understood. To address this issue, several studies have been done inducing misfolding of recombinant PrP (recPrP into classical amyloid structures using partially denaturing conditions. In this work, we report that misfolding of recPrP into PrP(Sc-like aggregates can be induced by simply incubating the protein in the presence of kosmotropic salts at concentrations that are known to retain or increase the stability of the protein. We used a simple experimental reaction (protein, buffer and salts submitted to agitation/incubation cycles at physiological temperature and pH. The formation of protease resistant-recPrP was time and salt-concentration dependent and required the presence of kosmotropic anions such as F(- or SO(4(-2. The molecular weights of the protease resistant recPrP fragments are reminiscent of those found in degradation assays of bona fide PrP(Sc. The aggregates also exhibited PrP(Sc-like ultrastructural features including rod-shape morphology under electron microscope, high beta-sheet content and thioflavin-T positive signal. The formation of recPrP aggregates with PrP(Sc biochemical features under conditions closer to physiological in the absence of organic co-factor molecules provides a simple setup that may prove helpful to understand the molecular mechanism of PrP misfolding.

  3. Kosmotropic anions promote conversion of recombinant prion protein into a PrPSc-like misfolded form.

    Science.gov (United States)

    Diaz-Espinoza, Rodrigo; Mukherjee, Abhisek; Soto, Claudio

    2012-01-01

    Prions are self-propagating proteins involved in transmissible spongiform encephalopaties in mammals. An aberrant conformation with amyloid-like features of a cell surface protein, termed prion protein (PrP), is thought to be the essential component of the infectious particle, though accessory co-factor molecules such as lipids and nucleotides may be involved. The cellular co-factors and environmental conditions implicated in PrP misfolding are not completely understood. To address this issue, several studies have been done inducing misfolding of recombinant PrP (recPrP) into classical amyloid structures using partially denaturing conditions. In this work, we report that misfolding of recPrP into PrP(Sc)-like aggregates can be induced by simply incubating the protein in the presence of kosmotropic salts at concentrations that are known to retain or increase the stability of the protein. We used a simple experimental reaction (protein, buffer and salts) submitted to agitation/incubation cycles at physiological temperature and pH. The formation of protease resistant-recPrP was time and salt-concentration dependent and required the presence of kosmotropic anions such as F(-) or SO(4)(-2). The molecular weights of the protease resistant recPrP fragments are reminiscent of those found in degradation assays of bona fide PrP(Sc). The aggregates also exhibited PrP(Sc)-like ultrastructural features including rod-shape morphology under electron microscope, high beta-sheet content and thioflavin-T positive signal. The formation of recPrP aggregates with PrP(Sc) biochemical features under conditions closer to physiological in the absence of organic co-factor molecules provides a simple setup that may prove helpful to understand the molecular mechanism of PrP misfolding.

  4. PrPSc-Specific Antibody Reveals C-Terminal Conformational Differences between Prion Strains.

    Science.gov (United States)

    Saijo, Eri; Hughson, Andrew G; Raymond, Gregory J; Suzuki, Akio; Horiuchi, Motohiro; Caughey, Byron

    2016-05-15

    Understanding the structure of PrP(Sc) and its strain variation has been one of the major challenges in prion disease biology. To study the strain-dependent conformations of PrP(Sc), we purified proteinase-resistant PrP(Sc) (PrP(RES)) from mouse brains with three different murine-adapted scrapie strains (Chandler, 22L, and Me7) and systematically tested the accessibility of epitopes of a wide range of anti-PrP and anti-PrP(Sc) specific antibodies by indirect enzyme-linked immunosorbent assay (ELISA). We found that epitopes of most anti-PrP antibodies were hidden in the folded structure of PrP(RES), even though these epitopes are revealed with guanidine denaturation. However, reactivities to a PrP(Sc)-specific conformational C-terminal antibody showed significant differences among the three different prion strains. Our results provide evidence for strain-dependent conformational variation near the C termini of molecules within PrP(Sc) multimers. It has long been apparent that prion strains can have different conformations near the N terminus of the PrP(Sc) protease-resistant core. Here, we show that a C-terminal conformational PrP(Sc)-specific antibody reacts differently to three murine-adapted scrapie strains. These results suggest, in turn, that conformational differences in the C terminus of PrP(Sc) also contribute to the phenotypic distinction between prion strains. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  5. Lies,Lies & Dammed PR

    OpenAIRE

    Foley, Michael

    2004-01-01

    Public relations has become the stronger partner in the tensions between PR and journalism with dangers to the public interest. Increasing pressures on journalists mean the claims of the public relations industry are not being questions as they should

  6. A organização dos trabalhadores na resistência às práticas discriminatórias: um olhar acerca da subjetividade, saúde e trabalho

    Directory of Open Access Journals (Sweden)

    Amazarray, Mayte Raya

    2005-01-01

    Full Text Available O presente artigo versa sobre a importância do coletivo na resistência dos trabalhadores à realidade do cotidiano de trabalho, a partir da análise de uma experiência de um grupo de bancários portadores de LER/DORT, que vivenciaram a privatização do banco em que trabalhavam. Descreve-se o processo de exclusão a que estes trabalhadores foram submetidos dentro da empresa e discutem-se as formas de enfrentamento utilizadas pelos mesmos enquanto processo de resistência e estratégia de saúde. Analisa-se, ainda, a trajetória destes trabalhadores em direção ao resgate da cidadania e à inclusão social, através do seu engajamento na constituição do Grupo de Ação Solidária dos portadores de LER/DORT em sua entidade sindical. El presente artículo trata sobre la importancia del colectivo en la resistencia de los trabajadores frente al cotidiano de trabajo, a partir del análisis de una experiencia de un grupo de empleados de la banca portadores de LER (lesiones por esfuerzos repetitivos / transtornos osteomuculares relacionados al trabajo que han vivido la privatización del banco en el que trabajaban. Se describe el proceso de exclusión a que estos trabajadores fueron sometidos en la empresa y se analisan las formas de enfrentamiento utilizadas por los mismos en cuanto proceso de resistencia y estrategia de salud. Se describe la trayectoria de estos trabajadores en dirección al rescate de la ciudadania y a la inclusión social, a traves de su participación en la constitución del Grupo de Acción Solidaria de los portadores de LER en su entidad sindical. $$bspa

  7. Internet innovation in PR management

    Directory of Open Access Journals (Sweden)

    Ćalasan Veljko B.

    2014-01-01

    Full Text Available PR Management in the last decade has evolved to unimaginable limits . Its rapid 'evolution ' is directly linked to the development and innovation, above all, of internet communications - Cyber 'world'. Although the genesis of PR management was announced in a way, the changes of the modern PR management have led to a change in the general attitude towards this particular activity. It has become an indispensable factor for the success of every business or social enterprise. In the general run for internet contents with better quality, as an indispensable tool of PR management , for better use of cyberspace , a new generation of PR manager is created, who has almost no resemblance to the earlier managers before two decades. For these reasons, we believe that Internet innovation through the implementation of PR management, changed the world economy and society. Adjusting speed to this, virtual , yet very real world , is proportional to the speed of development of an economic system as a whole, or any company at the micro level , and society in general .Internet is not an important innovation itself to be sufficient to meet the form and define the essence of economic relations. Only its proper exploitation with the constant use of tested and more intense innovation is the only way to the overall success . The absence of the above, in our opinion, is a sure path to failure.

  8. Module 13: Bulk Packaging Shipments by Highway

    International Nuclear Information System (INIS)

    Przybylski, J.L.

    1994-07-01

    The Hazardous Materials Modular Training Program provides participating United States Department of Energy (DOE) sites with a basic, yet comprehensive, hazardous materials transportation training program for use onsite. This program may be used to assist individual program entities to satisfy the general awareness, safety training, and function specific training requirements addressed in Code of Federal Regulation (CFR), Title 49, Part 172, Subpart H -- ''Training.'' Module 13 -- Bulk Packaging Shipments by Highway is a supplement to the Basic Hazardous Materials Workshop. Module 13 -- Bulk Packaging Shipments by Highway focuses on bulk shipments of hazardous materials by highway mode, which have additional or unique requirements beyond those addressed in the ten module core program. Attendance in this course of instruction should be limited to those individuals with work experience in transporting hazardous materials utilizing bulk packagings and who have completed the Basic Hazardous Materials Workshop or an equivalent. Participants will become familiar with the rules and regulations governing the transportation by highway of hazardous materials in bulk packagings and will demonstrate the application of these requirements through work projects and examination

  9. Development of superconductor bulk for superconductor bearing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chan Joong; Jun, Byung Hyuk; Park, Soon Dong (and others)

    2008-08-15

    Current carrying capacity is one of the most important issues in the consideration of superconductor bulk materials for engineering applications. There are numerous applications of Y-Ba-Cu-O (YBCO) bulk superconductors e.g. magnetic levitation train, flywheel energy storage system, levitation transportation, lunar telescope, centrifugal device, magnetic shielding materials, bulk magnets etc. Accordingly, to obtain YBCO materials in the form of large, single crystals without weak-link problem is necessary. A top seeded melt growth (TSMG) process was used to fabricate single crystal YBCO bulk superconductors. The seeded and infiltration growth (IG) technique was also very promising method for the synthesis of large, single-grain YBCO bulk superconductors with good superconducting properties. 5 wt.% Ag doped Y211 green compacts were sintered at 900 .deg. C {approx} 1200 .deg.C and then a single crystal YBCO was fabricated by an infiltration method. A refinement and uniform distribution of the Y211 particles in the Y123 matrix were achieved by sintering the Ag-doped samples. This enhancement of the critical current density was ascribable to a fine dispersion of the Y211 particles, a low porosity and the presence of Ag particles. In addition, we have designed and manufactured large YBCO single domain with levitation force of 10-13 kg/cm{sup 2} using TSMG processing technique.

  10. Ao coração das cidades: notas parresiastas às práticas securitárias e ao des/arquivamento como resistências

    Directory of Open Access Journals (Sweden)

    Flávia Cristina Silveira Lemos

    2014-12-01

    Full Text Available http://dx.doi.org/10.5007/2178-4582.2014v48n2p204 Este artigo busca explicitar mecanismos de segurança utilizados frente às resistências na cidade, no presente, a partir da problematização dos arquivos enquanto dispositivos de governo de si e dos outros, na parresía e na estilística da existência. A história pode nos auxiliar a lutar e a fazer ranger acontecimentos, para dispersar forças militares e de gestão da vida pela regulação de controles finos e securitários. Escrever a história implica desarquivar e forjar documentos com perguntas e pensamentos que operem a coragem da verdade, na parresía atualizada por meio de redes múltiplas, constituídas pelos encontros de forças que inventam corpos vibrantes e guerreiros como um ethos e uma política de existência diante das tentativas de silenciar arquivos, de destruí-los e de impedir acessos a eles ou mesmo de dificultar sua produção vital para construção de espaços heterotópicos e libertários.

  11. Three-dimensionality of the bulk electronic structure in WTe2

    Science.gov (United States)

    Wu, Yun; Jo, Na Hyun; Mou, Daixiang; Huang, Lunan; Bud'ko, S. L.; Canfield, P. C.; Kaminski, Adam

    2017-05-01

    We use temperature- and field-dependent resistivity measurements (Shubnikov-de Haas quantum oscillations) and ultrahigh-resolution, tunable, vacuum ultraviolet laser-based angle-resolved photoemission spectroscopy (ARPES) to study the three-dimensionality (3D) of the bulk electronic structure in WTe 2 , a type II Weyl semimetal. The bulk Fermi surface (FS) consists of two pairs of electron pockets and two pairs of hole pockets along the X -Γ -X direction as detected by using an incident photon energy of 6.7 eV, which is consistent with the previously reported data. However, if using an incident photon energy of 6.36 eV, another pair of tiny electron pockets is detected on both sides of the Γ point, which is in agreement with the small quantum oscillation frequency peak observed in the magnetoresistance. Therefore, the bulk, 3D FS consists of three pairs of electron pockets and two pairs of hole pockets in total. With the ability of fine tuning the incident photon energy, we demonstrate the strong three-dimensionality of the bulk electronic structure in WTe 2 . The combination of resistivity and ARPES measurements reveals the complete, and consistent, picture of the bulk electronic structure of this material.

  12. Præjudikat eller ikke præjudikat

    DEFF Research Database (Denmark)

    Nielsen, Ruth; Tvarnø, Christina D.

    2017-01-01

    Denne artikel behandler præjudikatværdien af EU-Domstolens og Højesterets afgørelser i Ajos-sagen. Artiklen belyser navnlig den manglende præjudikatværdi af Højesterets obiter dictum udtalelse om EU’s Charter om grundlæggende rettigheder, hvor Højesteret antog, at de grundlæggende rettigheder i...... Chartret, heriblandt diskriminationsforbuddet i artikel 21 ikke har direkte, horisontal virkning i Danmark. Efter forfatternes opfattelse er EU-Domstolens dom i Ajos-sagen, der fastholder tidligere EU-praksis (Mangold-og Kücükdeveci-dommene), præjudikat for, at Chartret har direkte, horisontal virkning i...

  13. Bulk amorphous Mg-based alloys

    DEFF Research Database (Denmark)

    Pryds, Nini

    2004-01-01

    The present paper describes the preparation and properties of bulk amorphous quarternary Mg-based alloys and the influence of additional elements on the ability of the alloy to form bulk amorphous. The main goal is to find a Mg-based alloy system which shows both high strength to weight ratio...... and a low glass transition temperature. The alloys were prepared by using a relatively simple technique, i.e. rapid cooling of the melt in a copper wedge mould. The essential structural changes that are achieved by going from the amorphous to the crystalline state through the supercooled liquid state...... are discussed in this paper. On the basis of these measurements phase diagrams of the different systems were constructed. Finally, it is demonstrated that when pressing the bulk amorphous alloy onto a metallic dies at temperatures within the supercooled liquid region, the alloy faithfully replicates the surface...

  14. Holographic bulk reconstruction with α' corrections

    Science.gov (United States)

    Roy, Shubho R.; Sarkar, Debajyoti

    2017-10-01

    We outline a holographic recipe to reconstruct α' corrections to anti-de Sitter (AdS) (quantum) gravity from an underlying CFT in the strictly planar limit (N →∞ ). Assuming that the boundary CFT can be solved in principle to all orders of the 't Hooft coupling λ , for scalar primary operators, the λ-1 expansion of the conformal dimensions can be mapped to higher curvature corrections of the dual bulk scalar field action. Furthermore, for the metric perturbations in the bulk, the AdS /CFT operator-field isomorphism forces these corrections to be of the Lovelock type. We demonstrate this by reconstructing the coefficient of the leading Lovelock correction, also known as the Gauss-Bonnet term in a bulk AdS gravity action using the expression of stress-tensor two-point function up to subleading order in λ-1.

  15. Glass Formation, Chemical Properties and Surface Analysis of Cu-Based Bulk Metallic Glasses

    Directory of Open Access Journals (Sweden)

    Akihisa Inoue

    2011-04-01

    Full Text Available This paper reviews the influence of alloying elements Mo, Nb, Ta and Ni on glass formation and corrosion resistance of Cu-based bulk metallic glasses (BMGs. In order to obtain basic knowledge for application to the industry, corrosion resistance of the Cu–Hf–Ti–(Mo, Nb, Ta, Ni and Cu–Zr–Ag–Al–(Nb bulk glassy alloy systems in various solutions are reported in this work. Moreover, X-ray photoelectron spectroscopy (XPS analysis is performed to clarify the surface-related chemical characteristics of the alloy before and after immersion in the solutions; this has lead to a better understanding of the correlation between the surface composition and the corrosion resistance.

  16. 76 FR 8658 - Bulk Solid Hazardous Materials: Harmonization With the International Maritime Solid Bulk Cargoes...

    Science.gov (United States)

    2011-02-15

    ... issues Special Permits as part of its mission to ensure maritime safety and facilitate U.S. commerce. To... Solid Hazardous Materials: Harmonization With the International Maritime Solid Bulk Cargoes (IMSBC) Code... International Convention for the Safety of Life at Sea (SOLAS), 1974, as amended, that carry bulk solid cargoes...

  17. Israel: a crise próxima

    Directory of Open Access Journals (Sweden)

    Peter DEMANT

    2014-12-01

    Full Text Available Apesar de êxitos indisputáveis, o Estado de Israel enfrenta problemas estruturais decorrentes do conflito com o mundo árabe. O texto analisa cinco vulnerabilidades subestimadas: (1 demografia: o crescimento dos ultraortodoxos e dos árabes israelenses, ambos antissionistas, que arrisca tornar minoria os judeus sionistas; (2 estratégia: novas formas de resistência usadas pelos árabes, tanto militares, como os mísseis, quanto pacíficas, como a resistência não violenta, estão progressivamente se tornando contraproducentes à ocupação israelense de territórios inimigos; (3 regional: a Primavera Árabe, apesar dos fracassos, é uma etapa na democratização e modernização das sociedades árabes que acabará erodindo a vantagem qualitativa-educacional israelense; (4 internacional: Israel depende, militar e economicamente, do apoio ocidental, mas, movidos por seus próprios desenvolvimentos demográficos e culturais, os europeus se mostram cada vez mais indiferentes ou hostis a Israel; e até nos EUA, último reduto de simpatia pró-israelense, a identificação com o Estado judaico pode se tornar mais frágil; (5 mundo judaico: devido à orientação cada vez mais particularista de Israel, há, em vez de legitimação recíproca, ameaça de alienação entre as diásporas judaicas e Israel. O artigo conclui que, a termo, as custas políticas, militares e socioculturais que a beligerância permanente impõe a Israel podem constituir um risco existencial para este país. Eventualmente, os dilemas podem se tornar perigosos para sua sobrevivência como Estado judaico.

  18. Remedial investigations for quarry bulk wastes

    International Nuclear Information System (INIS)

    1989-12-01

    The US Department of Energy proposes, as a separate operable unit of the Weldon Spring Site Remedial Action Project, to remove contaminated bulk wastes from the Weldon Spring quarry and transport them approximately four miles to the chemical plant portion of the raffinate pits and chemical plant area. The wastes will be held in temporary storage prior to the record of decision for the overall remedial action. The decision on the ultimate disposal of these bulk wastes will be included as part of the decision for management of the waste materials resulting from remedial action activities at the raffinate pits and chemical plant area. 86 refs., 71 figs., 83 tabs

  19. Stability Analysis of Bulk Viscous Cosmology

    Science.gov (United States)

    Sharif, M.; Mumtaz, Saadia

    2018-01-01

    In this paper, we study phase space analysis of FRW universe model by taking a power-law model for bulk viscosity coefficient. An autonomous system of equations is developed by defining normalized dimensionless variables. We find corresponding critical points for di.erent values of the parameters to investigate stability of the system. It is found that the presence of power-law model of bulk viscosity appears as an e.ective ingredient to enhance the stability of the respective universe model.

  20. Efficient bulk-loading of gridfiles

    Science.gov (United States)

    Leutenegger, Scott T.; Nicol, David M.

    1994-01-01

    This paper considers the problem of bulk-loading large data sets for the gridfile multiattribute indexing technique. We propose a rectilinear partitioning algorithm that heuristically seeks to minimize the size of the gridfile needed to ensure no bucket overflows. Empirical studies on both synthetic data sets and on data sets drawn from computational fluid dynamics applications demonstrate that our algorithm is very efficient, and is able to handle large data sets. In addition, we present an algorithm for bulk-loading data sets too large to fit in main memory. Utilizing a sort of the entire data set it creates a gridfile without incurring any overflows.

  1. Big bang nucleosynthesis constraints on bulk neutrinos

    International Nuclear Information System (INIS)

    Goh, H.S.; Mohapatra, R.N.

    2002-01-01

    We examine the constraints imposed by the requirement of successful nucleosynthesis on models with one large extra hidden space dimension and a single bulk neutrino residing in this dimension. We solve the Boltzmann kinetic equation for the thermal distribution of the Kaluza-Klein modes and evaluate their contribution to the energy density at the big bang nucleosynthesis epoch to constrain the size of the extra dimension R -1 ≡μ and the parameter sin 2 2θ which characterizes the mixing between the active and bulk neutrinos

  2. Thermal relics in cosmology with bulk viscosity

    Energy Technology Data Exchange (ETDEWEB)

    Iorio, A. [Charles University in Prague, Faculty of Mathematics and Physics, Prague (Czech Republic); Lambiase, G. [Universita di Salerno, Dipartimento di Fisica E.R. Caianiello, Fisciano (Italy); INFN, Gruppo Collegato di Salerno, Fisciano (Italy)

    2015-03-01

    In this paper we discuss some consequences of cosmological models in which the primordial cosmic matter is described by a relativistic imperfect fluid. The latter takes into account the dissipative effects (bulk viscosity) arising from different cooling rates of the fluid components in the expanding Universe. We discuss, in particular, the effects of the bulk viscosity on Big Bang Nucleosynthesis and on the thermal relic abundance of particles, looking at recent results of PAMELA experiment. The latter has determined an anomalous excess of positron events, which cannot be explained by conventional cosmology and particle physics. (orig.)

  3. A resistível decadência do marxismo teórico e do socialismo prático: um balanço objetivo e algumas considerações subjetivas

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Almeida

    2010-03-01

    dois pequenos países totalmente irrelevantes, o socialismo prático desapareceu dos supermercados da história, da mesma forma como marxismo teórico, que sobrevive apenas em faculdades de ciências sociais, geralmente de países pouco capitalistas. O ensaio tece considerações sobre os últimos "moicanos" desse credo decadente.

  4. Proteinase K and the structure of PrPse: the good, the bad, and the ugly

    Science.gov (United States)

    Infectious proteins (prions) are, ironically, defined by their resistance to proteolytic digestion. A defining characteristic of the transmissible isoform of the prion protein (PrPSc) is its partial resistance to proteinase K (PK) digestion. Diagnosis of prion disease typically relies upon immunod...

  5. Suppression of superconductivity in GdPr-123 system

    International Nuclear Information System (INIS)

    Akhavan, M.; Yamani, Z.

    1997-01-01

    Fourteen single phase polycrystalline ceramic Gd/sub 1-x/ Pr/sub x/ Ba/sub 2/, Cu/sub 3/ O/sub 7-y/ (Gd Pr-123) samples with different Pr doping concentration, x, have been prepared by the standard sintering technique and characterized by FXRD, SEM, TGA, and DT. The electrical resistivity measurements show that at X/sub cr/ = 0.45 superconductivity disappears. These data show that the T/sub c/(x) curve has two plate aux which appear at a 0-0.05 and x = 0.15-0.25. hence T/sub c/ (x) in this system does not follow the prediction of the Abrijkosov- Gorkov (AG) magnetic pair breaking theory. Based on the qualitative similarities among the physical properties of this system and the oxygen depleted RBa/sub 2/Cu/sub 3/O/sub 7-y/ (R-123) (R:Y or rare earth except Ce, Pr, Tb, Pm) system, such as T/sub c/(x) to T/sub c/(y) rho (T,x) to rho (T,y), we suggest that the increasing band filling and localization of states due to the disorder effects, together with Pr doping, could cause an 'effective' increasing of the oxygen deficiency in this system. This implies that a chain-plain correlation (CPC) effect is responsible for the high-T/sub c/ superconductivity. (author)

  6. Ten years experience of PR

    International Nuclear Information System (INIS)

    Dobak, Dobroslav

    2002-01-01

    This paper is an effort to summarize the way Slovak Bohunice NPP has gone through since the historical change in the Middle and Eastern European countries. Milestones on the way were: 1989 - change of political system; increasing interest of the public appearance; creation of work capacities - personnel and technical; education/exchange with Western countries; 1994 - establishment of Foreign Affairs and PR Department reporting directly to the NPP manager; application of various approaches, some observed from other countries; creation of utility policy - place of PR in the company; establishment of QA system - description of PR activities, goals, interlinks etc.; annual planning process including activities, finance, education (training). Lessons learned are: the NPP managers were not prepared; the public was not (and still is not) prepared to obtain specific information; education is crucial in opinion winning; simple overtake of methods from others is not always applicable; strategy and feedback are necessary. Special case was the early closure Bohunice V1 NPP

  7. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells

    KAUST Repository

    Brand, Vitali

    2012-04-01

    The fracture resistance of P3HT:PC 60BM-based photovoltaic devices are characterized using quantitative adhesion and cohesion metrologies that allow identification of the weakest layer or interface in the device structure. We demonstrate that the phase separated bulk heterojunction layer is the weakest layer and report quantitative cohesion values which ranged from ∼1 to 20 J m -2. The effects of layer thickness, composition, and annealing treatments on layer cohesion are investigated. Using depth profiling and X-ray photoelectron spectroscopy on the resulting fracture surfaces, we examine the gradient of molecular components through the thickness of the bulk heterojunction layer. Finally, using atomic force microscopy we show how the topography of the failure path is related to buckling of the metal electrode and how it develops with annealing. The research provides new insights on how the molecular design, structure and composition affect the cohesive properties of organic photovoltaics. © 2011 Elsevier B.V. All rights reserved.

  8. Production Equipment and Processes for Bulk Formed Micro Components

    Science.gov (United States)

    Paldan, N. A.; Arentoft, M.; Eriksen, R. S.

    2007-04-01

    Manufacturing techniques for production of small precise metallic parts has gained interest during recent years, an interest led by an industrial demand for components for integrated products like mobile phones, personal digital assistants (PDAs), mp3-players and in the future for spare parts for the human body. Micro components have also found several applications within the medical, audiological and dental industry, applications that impose increased demands for biocompatible and corrosion-resistant materials and cleanness. So far these micro components have mainly been manufactured by traditional machining techniques or chemical etching. However, these traditional machining and etching techniques are generally not well suited for mass production of advanced micro components, due to handling problems, waste of expensive material and long machining times. This calls for development of a novel production system that can meet the demands for high productivity, high reliability, low cost, while being environmental acceptable. Bulk metal forming meets these demands to a great extent, but the technology cannot directly be transferred to the micro scale. A flexible machine system for bulk micro forming has been developed and used to form a number of industrial micro parts in aluminium and silver, with ongoing work on forming of titanium. Manufacture of billets by cropping has been examined using a simple test rig and an automatic cropping device has been designed, manufactured and tested.

  9. Mechanical and thermal properties of bulk ZrB2

    International Nuclear Information System (INIS)

    Nakamori, Fumihiro; Ohishi, Yuji; Muta, Hiroaki; Kurosaki, Ken; Fukumoto, Ken-ichi; Yamanaka, Shinsuke

    2015-01-01

    ZrB 2 appears to have formed in the fuel debris at the Fukushima Daiichi nuclear disaster site, through the reaction between Zircaloy cladding materials and the control rod material B 4 C. Since ZrB 2 has a high melting point of 3518 K, the ceramic has been widely studied as a heat-resistant material. Although various studies on the thermochemical and thermophysical properties have been performed for ZrB 2 , significant differences exist in the data, possibly due to impurities or the porosity within the studied samples. In the present study, we have prepared a ZrB 2 bulk sample with 93.1% theoretical density by sintering ZrB 2 powder. On this sample, we have comprehensively examined the thermal and mechanical properties of ZrB 2 by the measurement of specific heat, ultrasonic sound velocities, thermal diffusivity, and thermal expansion. Vickers hardness and fracture toughness were also measured and found to be 13–23 GPa and 1.8–2.8 MPa m 0.5 , respectively. The relationships between these properties were carefully examined in the present study. - Highlights: • A ZrB 2 bulk sample with 93.1% theoretical density was prepared by sintering ZrB 2 powder. • We have evaluated mechanical and thermal properties such as Vickers hardness, fracture toughness and thermal conductivity. • The relationships between these properties were carefully examined.

  10. Phylogenetic analysis of PR genes in some pome fruit species with the emphasis on transcriptional analysis and ROS response under Erwinia amylovora inoculation in apple.

    Science.gov (United States)

    Hassani, Maryam; Salami, Seyed Alireza; Nasiri, Jaber; Abdollahi, Hamid; Ghahremani, Zahra

    2016-02-01

    Attempts were made to identify eight pathogenesis related (PR) genes (i.e., PR-1a, PR3-ch1, PR3-Ch2, PR3-Ch3, PR3-Ch4, PR3-Ch5, PR-5 and PR-8) from 27 genotypes of apple, quince and pear, which are induced in response to inoculation with the pathogen Erwinia amylovora, the causal agent of fire blight. Totally, 32 PR genes of different families were obtained, excepting PR3-Ch2 (amplified only in apple) and PR3-Ch4 (amplified only in apple and pear), the others were successfully amplified in all the genotypes of apple, quince and pear. Evolutionary, the genes of each family exhibited significant homology with each other, as the corresponded phylogenetic neighbor-joining-based dendrograms were taken into consideration. Meanwhile, according to the expression assay, it was deduced that the pathogen activity can significantly affect the expression levels of some selected PR genes of PR3-Ch2, PR3-Ch4, PR3-Ch5 and particularly Cat I in both resistant (MM-111) and semi-susceptible (MM-106) apple rootstocks. Lastly, it was concluded that the pathogen E. amylovora is able to stimulate ROS response, particularly using generation of hydrogen peroxide (H2O2) in both aforementioned apple rootstock.

  11. Radiopacity of bulk fill flowable resin composite materials | Yildirim ...

    African Journals Online (AJOL)

    Objectives: The purpose of this study was to evaluate the radiopacity of currently marketed bulk fill flowable dental composite materials (Beautifil Bulk Flowable, SDR Flow, Filtek Bulk Fill Flow, and x‑tra Base Bulk Fill). Materials and Methods: Six specimens of each material with a thickness of 1 mm were prepared, and ...

  12. Radiopacity of bulk fill flowable resin composite materials

    African Journals Online (AJOL)

    2015-08-23

    Aug 23, 2015 ... Objectives: The purpose of this study was to evaluate the radiopacity of currently marketed bulk fill flowable dental composite materials (Beautifil Bulk Flowable, SDR Flow, Filtek Bulk Fill Flow, and x‑tra Base Bulk Fill). Materials and Methods: Six specimens of each material with a thickness of 1 mm were ...

  13. Credibility Discourse of PR Agencies

    DEFF Research Database (Denmark)

    Isaksson, Maria; Jørgensen, Poul Erik Flyvholm

    2008-01-01

    This research examines the credibility discourse posted on the corporate websites of 60 British, Danish and Norwegian public relations agencies. The purpose was to determine the nature and patterns of the statements of credibility that PR agencies from different cultures have considered instrumen......This research examines the credibility discourse posted on the corporate websites of 60 British, Danish and Norwegian public relations agencies. The purpose was to determine the nature and patterns of the statements of credibility that PR agencies from different cultures have considered...

  14. Electromagnetic behavior of bulk textured YBaCuO

    International Nuclear Information System (INIS)

    Winter, V.; Herrmann, P.F.; Agnoux, C.; Leriche, A.; Mautref, M.; Grivon, F.; Fevrier, A.

    1992-01-01

    This paper reports electrical and magnetic results obtained on bulk YBaCuO samples manufactured by Melt Textured Growth process. These studies are important for the understanding of the limitation mechanisms of transport current. Resistive measurements on textured sample confirm the interest of these materials. Transport critical current densities in excess of 2.5 10 8 A/m 2 have been measured in a field of 2 T, at 77 K in oriented YBaCuO. The critical state concept for the calculation of internal flux profiles is used to model the magnetization behavior of textured materials. The authors compare magnetization measurements with theoretical curves for different orientations of the magnetic field with respect to crystallographic axes. This study allows to determine inductive critical current densities which are strongly influenced by the current path geometry. Then the authors compare these results to transport J ct values. Self field losses values are also presented

  15. Studies on bulk growth, structural and microstructural ...

    Indian Academy of Sciences (India)

    Abstract. Bulk single crystal of 4-aminobenzophenone with a size of 25 mm dia. and 35 mm length has been grown by vertical Bridgman technique. The crystal system of the grown crystal was confirmed by X-ray diffraction analysis. Crystalline perfection was analysed by high resolution X-ray diffraction studies. Chemical ...

  16. Vortices in superconducting bulk, films and SQUIDs

    Indian Academy of Sciences (India)

    The properties of the ideal periodic vortex lattice in bulk superconductors and in films of any thickness can be calculated from Ginzburg-Landau theory by an iteration method using Fourier series. The London theory yields general analytic expressions for the magnetic field and energy of arbitrary arrangements of straight or ...

  17. Thermal bulk polymerization of cholesteryl acrylate

    NARCIS (Netherlands)

    de Visser, A.C.; de Groot, K.; Feijen, Jan; Bantjes, A.

    1971-01-01

    The thermal bulk polymerization of cholesteryl acrylate was carried out in the solid phase, the mesomorphic phase, and the liquid phase to study the effect of monomer ordering on polymerization rate and polymer properties. The rate increased with decreasing ordering (or enhanced mobility) of the

  18. Transformation kinetics for surface and bulk nucleation

    Energy Technology Data Exchange (ETDEWEB)

    Villa, Elena, E-mail: elena.villa@unimi.it [University of Milan, Department of Mathematics, via Saldini 50, 20133 Milano (Italy); Rios, Paulo R., E-mail: prrios@metal.eeimvr.uff.br [Universidade Federal Fluminense, Escola de Engenharia Industrial Metalurgica de Volta Redonda, Av. dos Trabalhadores 420, 27255-125 Volta Redonda, RJ (Brazil)] [RWTH Aachen University, Institut fuer Metallkunde und Metallphysik, D-52056 Aachen (Germany)

    2010-04-15

    A rigorous mathematical approach based on the causal cone and stochastic geometry concepts is used to derive new exact expressions for transformation kinetics theory. General expressions for the mean volume density and the volume fraction are derived for both surface and bulk nucleation in a general Borel subset of R{sup 3}. In practice, probably any specimen shape of engineering interest is going to be a Borel set. An expression is also derived for the important case of polyhedral shape, in which surface nucleation may take place on the faces, edges and vertices of the polyhedron as well as within the bulk. Moreover, explicit expressions are given for surface and bulk nucleation for three specific shapes of engineering relevance: two parallel planes, an infinitely long cylinder and a sphere. Superposition is explained in detail and it permits the treatment of situations in which surface and bulk nucleation take place simultaneously. The new exact expressions presented here result in a significant increase in the number of exactly solvable cases available to formal kinetics.

  19. Characteristics of bulk liquid undercooling and crystallization ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 1. Characteristics of bulk liquid undercooling and crystallization behaviors of jet electrodeposition Ni–W–P alloy. J K Yu Y H Wang G Z Xing Q Qiao B Liu Z J Chu C L Li F You. Volume 38 Issue 1 February 2015 pp 157-161 ...

  20. Bulk viscous cosmology in early Universe

    Indian Academy of Sciences (India)

    The effect of bulk viscosity on the early evolution of Universe for a spatially homogeneous and isotropic Robertson-Walker model is considered. Einstein's field equations are solved by using `gamma-law' equation of state = ( - 1)ρ, where the adiabatic parameter gamma () depends on the scale factor of the model.

  1. Longitudinal bulk a coustic mass sensor

    DEFF Research Database (Denmark)

    Hales, Jan Harry; Teva, Jordi; Boisen, Anja

    2009-01-01

    Design, fabrication and characterization, in terms of mass sensitivity, is presented for a polycrystalline silicon longitudinal bulk acoustic cantilever. The device is operated in air at 51 MHz, resulting in a mass sensitivity of 100 HZ/fg (1 fg = 10{su−15 g). The initial characterization is cond...

  2. Bulk disk resonator based ultrasensitive mass sensor

    DEFF Research Database (Denmark)

    Cagliani, Alberto; Davis, Zachary James

    2009-01-01

    In the framework of developing an innovative label-free sensor for multiarrayed biodetection applications, we present a novel bulk resonator based mass sensor. The sensor is a polysilicon disk which shows a Q-factor of 6400 in air at 68.8 MHz, resulting in mass resolutions down in the femtogram r...

  3. A stereoscopic look into the bulk

    Energy Technology Data Exchange (ETDEWEB)

    Czech, Bartłomiej; Lamprou, Lampros; McCandlish, Samuel; Mosk, Benjamin [Stanford Institute for Theoretical Physics, Department of Physics, Stanford University,Stanford, CA 94305 (United States); Sully, James [Theory Group, SLAC National Accelerator LaboratoryMenlo Park, CA 94025 (United States)

    2016-07-26

    We present the foundation for a holographic dictionary with depth perception. The dictionary consists of natural CFT operators whose duals are simple, diffeomorphism-invariant bulk operators. The CFT operators of interest are the “OPE blocks,” contributions to the OPE from a single conformal family. In holographic theories, we show that the OPE blocks are dual at leading order in 1/N to integrals of effective bulk fields along geodesics or homogeneous minimal surfaces in anti-de Sitter space. One widely studied example of an OPE block is the modular Hamiltonian, which is dual to the fluctuation in the area of a minimal surface. Thus, our operators pave the way for generalizing the Ryu-Takayanagi relation to other bulk fields. Although the OPE blocks are non-local operators in the CFT, they admit a simple geometric description as fields in kinematic space — the space of pairs of CFT points. We develop the tools for constructing local bulk operators in terms of these non-local objects. The OPE blocks also allow for conceptually clean and technically simple derivations of many results known in the literature, including linearized Einstein’s equations and the relation between conformal blocks and geodesic Witten diagrams.

  4. Hexaferrite multiferroics: from bulk to thick films

    Science.gov (United States)

    Koutzarova, T.; Ghelev, Ch; Peneva, P.; Georgieva, B.; Kolev, S.; Vertruyen, B.; Closset, R.

    2018-03-01

    We report studies of the structural and microstructural properties of Sr3Co2Fe24O41 in bulk form and as thick films. The precursor powders for the bulk form were prepared following the sol-gel auto-combustion method. The prepared pellets were synthesized at 1200 °C to produce Sr3Co2Fe24O41. The XRD spectra of the bulks showed the characteristic peaks corresponding to the Z-type hexaferrite structure as a main phase and second phases of CoFe2O4 and Sr3Fe2O7-x. The microstructure analysis of the cross-section of the bulk pellets revealed a hexagonal sheet structure. Large areas were observed of packages of hexagonal sheets where the separate hexagonal particles were ordered along the c axis. Sr3Co2Fe24O41 thick films were deposited from a suspension containing the Sr3Co2Fe24O41 powder. The microstructural analysis of the thick films showed that the particles had the perfect hexagonal shape typical for hexaferrites.

  5. Development of portable superconducting bulk magnet system

    International Nuclear Information System (INIS)

    Saho, N.; Nishijima, N.; Tanaka, H.; Sasaki, A.

    2009-01-01

    Recently a magnetic drug delivery system (MDDS) has been developing to navigate magnetic seeded drugs around diseased parts of the human body. To improve the magnetic drug delivery performance, a portable high temperature superconducting (HTS) bulk magnet system with high magnetic fields has been developed. This magnet system mainly consists of small bulk high temperature superconductors and a compact cryocooler. The materials of the high temperature superconductor are rare earth 123 single domain compounds (Gd-Ba-Cu-O). The bulk magnet was activated successfully using field-cooling magnetization under the superconducting solenoid magnet. The magnetic flux densities at the surface of the vacuum chambers that contain bulk magnets reached 5.07 T and 6.76 T using the static magnetic fields of 6 T and 10 T superconducting solenoid magnets, respectively. A cryocooler cooled them to 38.1 K and 39.1 K. It was clarified that the magnetic gradient was approximately 10 T/m at a position located 50 mm from the surface of the vacuum chambers.

  6. THE OPTIMIZATION OF PLUSH YARNS BULKING PROCESS

    Directory of Open Access Journals (Sweden)

    VINEREANU Adam

    2014-05-01

    Full Text Available This paper presents the experiments that were conducted on the installation of continuous bulking and thermofixing “SUPERBA” type TVP-2S for optimization of the plush yarns bulking process. There were considered plush yarns Nm 6.5/2, made of the fibrous blend of 50% indigenous wool sort 41 and 50% PES. In the first stage, it performs a thermal treatment with a turboprevaporizer at a temperature lower than thermofixing temperature, at atmospheric pressure, such that the plush yarns - deposed in a freely state on a belt conveyor - are uniformly bulking and contracting. It was followed the mathematical modeling procedure, working with a factorial program, rotatable central composite type, and two independent variables. After analyzing the parameters that have a direct influence on the bulking degree, there were selected the pre-vaporization temperature (coded x1,oC and the velocity of belt inside pre-vaporizer (coded x 2, m/min. As for the dependent variable, it was chosen the plush yarn diameter (coded y, mm. There were found the coordinates of the optimal point, and then this pair of values was verified in practice. These coordinates are: x1optim= 90oC and x 2optim= 6.5 m/min. The conclusion is that the goal was accomplished: it was obtained a good cover degree f or double-plush carpets by reducing the number of tufts per unit surface.

  7. 33 CFR 127.313 - Bulk storage.

    Science.gov (United States)

    2010-07-01

    ...) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Operations § 127.313 Bulk storage. (a) The operator...: (1) LNG. (2) LPG. (3) Vessel fuel. (4) Oily waste from vessels. (5) Solvents, lubricants, paints, and...

  8. Failure by fracture in bulk metal forming

    DEFF Research Database (Denmark)

    Silva, C.M.A.; Alves, Luis M.; Nielsen, Chris Valentin

    2015-01-01

    This paper revisits formability in bulk metal forming in the light of fundamental concepts of plasticity,ductile damage and crack opening modes. It proposes a new test to appraise the accuracy, reliability and validity of fracture loci associated with crack opening by tension and out-of-plane shear...

  9. Proteinase K and the structure of PrPSc: The good, the bad and the ugly.

    Science.gov (United States)

    Silva, Christopher J; Vázquez-Fernández, Ester; Onisko, Bruce; Requena, Jesús R

    2015-09-02

    Infectious proteins (prions) are, ironically, defined by their resistance to proteolytic digestion. A defining characteristic of the transmissible isoform of the prion protein (PrP(Sc)) is its partial resistance to proteinase K (PK) digestion. Diagnosis of prion disease typically relies upon immunodetection of PK-digested PrP(Sc) by Western blot, ELISA or immunohistochemical detection. PK digestion has also been used to detect differences in prion strains. Thus, PK has been a crucial tool to detect and, thereby, control the spread of prions. PK has also been used as a tool to probe the structure of PrP(Sc). Mass spectrometry and antibodies have been used to identify PK cleavage sites in PrP(Sc). These results have been used to identify the more accessible, flexible stretches connecting the β-strand components in PrP(Sc). These data, combined with physical constraints imposed by spectroscopic results, were used to propose a qualitative model for the structure of PrP(Sc). Assuming that PrP(Sc) is a four rung β-solenoid, we have threaded the PrP sequence to satisfy the PK proteolysis data and other experimental constraints. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Cloning, Overexpression andin vitroAntifungal Activity ofZea MaysPR10 Protein.

    Science.gov (United States)

    Zandvakili, Niloofar; Zamani, Mohammadreza; Motallebi, Mostafa; Moghaddassi Jahromi, Zahra

    2017-03-01

    Plants have various defense mechanisms such as production of antimicrobial peptides, particularly pathogenesis related proteins (PR proteins). PR10 family is an essential member of this group, with antifungal, antibacterial and antiviral activities. The goal of this study is to assess the antifungal activity of maize PR10 against some of fungal phytopathogens. Zea mays PR10 gene (TN-05-147) was cloned from genomic DNA and cDNA and overexpressed in Escherichia coli . The existence of a 77- bp intron and two exons in PR10 was confi rmed by comparing the genomic and cDNA sequences. The PR10 cDNA was cloned in pET26b (+) expression vector and transformed into E. coli strain Rosetta DE3 in order to express PR10 recombinant protein. Expression of the recombinant protein was checked by western analysis. Recombinant PR10 appeared as insoluble inclusion bodies and thus solubilized and refolded. PR10 was isolated using Ni- NTA column. The activity of the refolded protein was confi rmed by DNA degradation test. The antifungal activity of PR10 was assessed using radial diff usion, disc diff usion and spore germination. The hemolytic assay was performed to investigate the biosafety of recombinant PR10. Recombinant maize PR10 exerted broad spectrum antifungal activity against Botrytis cinerea, Sclerotinia sclerotiorum, Fusarium oxysporum, Verticillium dahlia and Alternaria solani . Hemolysis biosafety test indicated that the protein is not poisonous to mammalian cells. Maize PR10 has the potential to be used as the antifungal agent against diff erent fungal phytopathogens. Therefore, this protein can be used in order to produce antifungal agents and fungi resistance transgenic plants.

  11. Comparison between TRMM PR and

    Indian Academy of Sciences (India)

    Due to their influence on global climate, El Ni˜no–. La Ni˜na events have received much attention in ..... Colombia is well represented in TRMM PR and. GPCP, in agreement with the study by Figueroa and Nobre ..... cipitations and Climate Change (eds) Desbois M and. Desalmond F, NATO ASI Series I, 26, Springer-Verlag,.

  12. High spin spectroscopy of Pr

    Indian Academy of Sciences (India)

    2001-07-31

    Jul 31, 2001 ... c Indian Academy of Sciences. Vol. 57, No. 1. — journal of. July 2001 physics pp. 175–179. High spin spectroscopy of. 139. Pr. S CHANDA. ½. , SARMISHTHA BHATTACHARYYA. ¾. , TUMPA BHATTACHARJEE .... which is configured under LINUX platform. Around 90 x10 two and higher fold events were ...

  13. PrP mRNA and protein expression in brain and PrP(c) in CSF in Creutzfeldt-Jakob disease MM1 and VV2.

    Science.gov (United States)

    Llorens, Franc; Ansoleaga, Belén; Garcia-Esparcia, Paula; Zafar, Saima; Grau-Rivera, Oriol; López-González, Irene; Blanco, Rosi; Carmona, Margarita; Yagüe, Jordi; Nos, Carlos; Del Río, José Antonio; Gelpí, Ellen; Zerr, Inga; Ferrer, Isidre

    2013-01-01

    Creutzfeldt-Jakob disease (CJD) is a heterogenic neurodegenerative disorder associated with abnormal post-translational processing of cellular prion protein (PrP(c)). CJD displays distinctive clinical and pathological features which correlate with the genotype at the codon 129 (methionine or valine: M or V respectively) in the prion protein gene and with size of the protease-resistant core of the abnormal prion protein PrP(sc) (type 1: 20/21 kDa and type 2: 19 kDa). MM1 and VV2 are the most common sporadic CJD (sCJD) subtypes. PrP mRNA expression levels in the frontal cortex and cerebellum are reduced in sCJD in a form subtype-dependent. Total PrP protein levels and PrP(sc) levels in the frontal cortex and cerebellum accumulate differentially in sCJD MM1 and sCJD VV2 with no relation between PrP(sc) deposition and spongiform degeneration and neuron loss, but with microgliosis, and IL6 and TNF-α response. In the CSF, reduced PrP(c), the only form present in this compartment, occurs in sCJD MM1 and VV2. PrP mRNA expression is also reduced in the frontal cortex in advanced stages of Alzheimer disease, Lewy body disease, progressive supranuclear palsy, and frontotemporal lobe degeneration, but PrP(c) levels in brain varies from one disease to another. Reduced PrP(c) levels in CSF correlate with PrP mRNA expression in brain, which in turn reflects severity of degeneration in sCJD.

  14. The Japanese PR and PP program

    International Nuclear Information System (INIS)

    Senzaki, Masao; Inoue, Naoko; Kuno, Yusuke

    2008-01-01

    Japan has established the commercial nuclear fuel cycle with LWR as a non-weapon state, and now has been developing RF fuel cycle as the next generation technology. Japanese studies on proliferation resistance have started in 1990's by JNC, predecessor concern of JAEA. The early study was focused on the intrinsic features of Pu and safeguards technologies. Based on TOPS report, JNC has developed a quantitative assessment methodology and modified it by JNC designers. JNC and JAEA intends to play the role as a hub that contributes international collaborative study such as GEN IV PR and PP Experts Group and INPRO based on Japanese experiences of safeguards and nonproliferation efforts, and feedback to domestic experts. These efforts include not only the contribution into those programs, but also introduce these activities to Japanese domestic experts, holding international workshops, symposiums as a 'Hub' of domestic and international experts. This paper will introduce the Japanese Proliferation Resistance studies including, the early studies, international workshops/symposiums, the study in FaCT, international collaboration studies, and the future direction identified for the nuclear fuel cycle systems. (author)

  15. Determination of energy transfer parameters in Er3+-doped and Er3+, Pr3+-codoped ZBLAN glasses

    NARCIS (Netherlands)

    Marshall, Christopher; Golding, Paul S.; Jackson, Stuart D.; King, Terence A.; Pollnau, Markus

    A detailed characterization of energy level lifetimes and energy-transfer processes in Er3+-doped and Er3+, Pr3+-codoped ZBLAN bulk glasses is presented. Energy transfer upconversion parameters from the Er3+ 4I13/2 and 4I11/2 levels have been measured and are compared to energy transfer from Er3+ to

  16. Bulk solitary waves in elastic solids

    Science.gov (United States)

    Samsonov, A. M.; Dreiden, G. V.; Semenova, I. V.; Shvartz, A. G.

    2015-10-01

    A short and object oriented conspectus of bulk solitary wave theory, numerical simulations and real experiments in condensed matter is given. Upon a brief description of the soliton history and development we focus on bulk solitary waves of strain, also known as waves of density and, sometimes, as elastic and/or acoustic solitons. We consider the problem of nonlinear bulk wave generation and detection in basic structural elements, rods, plates and shells, that are exhaustively studied and widely used in physics and engineering. However, it is mostly valid for linear elasticity, whereas dynamic nonlinear theory of these elements is still far from being completed. In order to show how the nonlinear waves can be used in various applications, we studied the solitary elastic wave propagation along lengthy wave guides, and remarkably small attenuation of elastic solitons was proven in physical experiments. Both theory and generation for strain soliton in a shell, however, remained unsolved problems until recently, and we consider in more details the nonlinear bulk wave propagation in a shell. We studied an axially symmetric deformation of an infinite nonlinearly elastic cylindrical shell without torsion. The problem for bulk longitudinal waves is shown to be reducible to the one equation, if a relation between transversal displacement and the longitudinal strain is found. It is found that both the 1+1D and even the 1+2D problems for long travelling waves in nonlinear solids can be reduced to the Weierstrass equation for elliptic functions, which provide the solitary wave solutions as appropriate limits. We show that the accuracy in the boundary conditions on free lateral surfaces is of crucial importance for solution, derive the only equation for longitudinal nonlinear strain wave and show, that the equation has, amongst others, a bidirectional solitary wave solution, which lead us to successful physical experiments. We observed first the compression solitary wave in the

  17. Photorefractive grating formation in piezoelectric La3Ga5SiO14:Pr3+ crystals

    DEFF Research Database (Denmark)

    Dam-Hansen, C.; Johansen, P.M.; Fridkin, V.M.

    1996-01-01

    Photorefractive grating formation and erasure in piezoelectric crystals of La3Ga5SiO14:Pr3+ are presented. The specific photoconductivity and the photorefractive sensitivity are determined. The polarization dependence of the grating formation due to the bulk photovoltaic effect is shown and compa......Photorefractive grating formation and erasure in piezoelectric crystals of La3Ga5SiO14:Pr3+ are presented. The specific photoconductivity and the photorefractive sensitivity are determined. The polarization dependence of the grating formation due to the bulk photovoltaic effect is shown...... and compared favorably with the theoretical expression. This photorefractive material provides a possibility for separate investigations of the charge migration processes responsible for the photorefractive effect. (C) 1996 American Institute of Physics....

  18. [Impacts of filamentous bulking on treatment effect and fouling characteristics of nonwoven bioreactor].

    Science.gov (United States)

    Shi, Kuan; Xue, Gang; Gao, Pin; Wu, Fan

    2014-06-01

    Sludge flocs morphology and effluent qualities of nonwoven bioreactor during filamentous bulking and normal sludge status were compared. Flux variations, analysis of filtration resistances and extracellular polymer substances (EPS) contents during filamentous bulking and normal sludge status were studied. The results showed that the average particle size of bulking sludge flocs and normal sludge flocs was 448.6 microm and 234.8 microm, respectively. During the bulking sludge status, the average COD and NH4(+) -N removal rate and effluent turbidity were 90.1%, 93.1% and 1.33 NTU, respectively, compared with 91.4% , 97.0% and 0.99 NTU during the normal sludge status. Filamentous bulking had little impact on COD removal, while it inhibited NH4(+) -N removal to a certain extent and had slight impact on effluent turbidity. Average membrane flux decay rates during the bulking sludge status and the normal sludge status were 3.29 L x (m2 x h2)(-1) and 4.87 L x (m2 x h2)(-1), respectively, and the fouling during bulking sludge status was slighter. Reversible fouling was the main fouling when sludge was bulking while irreversible fouling was the main fouling when the sludge was in normal status. The prior occurrence of reversible fouling could reduce irreversible fouling therefore slow down the flux decline. Soluble microbial products (SMP) contents in normal sludge mixed liquid and bulking sludge mixed liquid were 21.369 mg x L(-1) and 10.182 mg x L(-1), respectively, protein/polysaccharide (P/C) was 0.370 and 0.497, respectively, SMP gross was related to fouling resistance and P/C was associated with reversible fouling proportion. The relation between loosely bound EPS in mixed liquid sludge and membrane fouling was similar to SMP. Sludge with more EPS could accumulate on membrane more easily, and the EPS that accumulated on membrane was mainly protein. EPS gross in mixed liquid sludge, EPS in membrane surface sludge and their P/C all had positive correlations to

  19. Effect of Pr Valence State on Interfacial Structure and Electrical Properties of Pr Oxide/PrON/Ge Gate Stack Structure

    Science.gov (United States)

    Kato, Kimihiko; Sakashita, Mitsuo; Takeuchi, Wakana; Kondo, Hiroki; Nakatsuka, Osamu; Zaima, Shigeaki

    2011-04-01

    In this study, we investigated the valence state and chemical bonding state of Pr in a Pr oxide/PrON/Ge structure. We clarified the relationship between the valence state of Pr and the Pr oxide/Ge interfacial reaction using Pr oxide/Ge and Pr oxide/PrON/Ge samples. We found the formation of three Pr oxide phases in Pr oxide films; hexagonal Pr2O3 (h-Pr2O3) (Pr3+), cubic Pr2O3 (c-Pr2O3) (Pr3+), and c-PrO2 (Pr4+). We also investigated the effect of a nitride interlayer on the interfacial reaction in Pr oxide/Ge gate stacks. In a sample with a nitride interlayer (Pr oxide/PrON/Ge), metallic Pr-Pr bonds are also formed in the c-Pr2O3 film. After annealing in H2 ambient, the diffusion of Ge into Pr oxide is not observed in this sample. Pr-Pr bonds probably prevent the interfacial reaction and Ge oxide formation, considering that the oxygen chemical potential of this film is lower than that of a GeO2/Ge system. On the other hand, the rapid thermal oxidation (RTO) treatment terminates the O vacancies and defects in c-Pr2O3. As a result, c-PrO2 with tetravalent Pr is formed in the Pr oxide/PrON/Ge sample with RTO. In this sample, the leakage current density is effectively decreased in comparison with the sample without RTO. Hydrogen termination works effectively in Pr oxide/PrON/Ge samples with and without RTO, and we can achieve an interface state density of as low as 4 ×1011 eV-1·cm-2.

  20. The N-Terminal Sequence of Prion Protein Consists an Epitope Specific to the Abnormal Isoform of Prion Protein (PrPSc)

    Science.gov (United States)

    Masujin, Kentaro; Kaku-Ushiki, Yuko; Miwa, Ritsuko; Okada, Hiroyuki; Shimizu, Yoshihisa; Kasai, Kazuo; Matsuura, Yuichi; Yokoyama, Takashi

    2013-01-01

    The conformation of abnormal prion protein (PrPSc) differs from that of cellular prion protein (PrPC), but the precise characteristics of PrPSc remain to be elucidated. To clarify the properties of native PrPSc, we attempted to generate novel PrPSc-specific monoclonal antibodies (mAbs) by immunizing PrP-deficient mice with intact PrPSc purified from bovine spongiform encephalopathy (BSE)-affected mice. The generated mAbs 6A12 and 8D5 selectivity precipitated PrPSc from the brains of prion-affected mice, sheep, and cattle, but did not precipitate PrPC from the brains of healthy animals. In histopathological analysis, mAbs 6A12 and 8D5 strongly reacted with prion-affected mouse brains but not with unaffected mouse brains without antigen retrieval. Epitope analysis revealed that mAbs 8D5 and 6A12 recognized the PrP subregions between amino acids 31–39 and 41–47, respectively. This indicates that a PrPSc-specific epitope exists in the N-terminal region of PrPSc, and mAbs 6A12 and 8D5 are powerful tools with which to detect native and intact PrPSc. We found that the ratio of proteinase K (PK)-sensitive PrPSc to PK-resistant PrPSc was constant throughout the disease time course. PMID:23469131

  1. Molecular Characterization and Functional Analysis of PR-1-Like Proteins Identified from the Wheat Head Blight Fungus Fusarium graminearum.

    Science.gov (United States)

    Lu, Shunwen; Edwards, Michael C

    2018-04-01

    The group 1 pathogenesis-related (PR-1) proteins originally identified from plants and their homologs are also found in other eukaryotic kingdoms. Studies on nonplant PR-1-like (PR-1L) proteins have been pursued widely in humans and animals but rarely in filamentous ascomycetes. Here, we report the characterization of four PR-1L proteins identified from the ascomycete fungus Fusarium graminearum, the primary cause of Fusarium head blight of wheat and barley (designated FgPR-1L). Molecular cloning revealed that the four FgPR-1L proteins are all encoded by small open reading frames (612 to 909 bp) that are often interrupted by introns, in contrast to plant PR-1 genes that lack introns. Sequence analysis indicated that all FgPR-1L proteins contain the PR-1-specific three-dimensional structure, and one of them features a C-terminal transmembrane (TM) domain that has not been reported for any stand-alone PR-1 proteins. Transcriptional analysis revealed that the four FgPR-1L genes are expressed in axenic cultures and in planta with different spatial or temporal expression patterns. Phylogenetic analysis indicated that fungal PR-1L proteins fall into three major groups, one of which harbors FgPR-1L-2-related TM-containing proteins from both phytopathogenic and human-pathogenic ascomycetes. Low-temperature sodium dodecyl sulfate polyacrylamide gel electrophoresis and proteolytic assays indicated that the recombinant FgPR-1L-4 protein exists as a monomer and is resistant to subtilisin of the serine protease family. Functional analysis confirmed that deletion of the FgPR-1L-4 gene from the fungal genome results in significantly reduced virulence on susceptible wheat. This study provides the first example that the F. graminearum-wheat interaction involves a pathogen-derived PR-1L protein that affects fungal virulence on the host.

  2. Bulk locality and boundary creating operators

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, Yu [Walter Burke Institute for Theoretical Physics, California Institute of Technology, Pasadena, California 91125 (United States); Ooguri, Hirosi [Walter Burke Institute for Theoretical Physics, California Institute of Technology, Pasadena, California 91125 (United States); Kavli Institute for the Physics and Mathematics of the Universe, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8583 (Japan)

    2015-10-19

    We formulate a minimum requirement for CFT operators to be localized in the dual AdS. In any spacetime dimensions, we show that a general solution to the requirement is a linear superposition of operators creating spherical boundaries in CFT, with the dilatation by the imaginary unit from their centers. This generalizes the recent proposal by Miyaji et al. for bulk local operators in the three dimensional AdS. We show that Ishibashi states for the global conformal symmetry in any dimensions and with the imaginary dilatation obey free field equations in AdS and that incorporating bulk interactions require their superpositions. We also comment on the recent proposals by Kabat et al., and by H. Verlinde.

  3. Posterior bulk-filled resin composite restorations.

    DEFF Research Database (Denmark)

    van Dijken, Jan WV; Pallesen, Ulla

    2016-01-01

    Purpose/aim: To evaluate in a randomized controlled study the 5-year clinical durability of a flowable resin composite bulk-fill technique in Class I and Class II restorations. Materials and methods: 38 pairs Class I and 62 pairs Class II restorations were placed in 44 male and 42 female (mean age...... 52.4 years). Each patient received at least two, as similar as possible, extended Class I or Class II restorations. In all cavities, a 1-step self-etch adhesive (Xeno V+) was applied. Randomized, one of the cavities of each pair received the flowable bulk-filled resin composite (SDR), in increments...... up to 4mm as needed to fill the cavity 2mm short of the occlusal cavosurface. The occlusal part was completed with the nano-hybrid resin composite (Ceram X mono+). In the other cavity, the resin composite-only (Ceram X mono+) was placed in 2mm increments. The restorations were evaluated using...

  4. Bulk micromegas detectors for large TPC applications

    CERN Document Server

    Bouchez, J; Cavata, Ch; Colas, P; De La Broise, X; Delbart, A; Giganon, Arnaud; Giomataris, Ioanis; Graffin, P; Mols, J Ph; Pierre, F; Ritou, J L; Sarrat, A; Virique, E; Zito, M; Radicioni, E; De Oliveira, R; Dumarchez, J; Abgrall, N; Bene, P; Blondel, A; Cervera-Villanueva, Anselmo; Ferrère, D; Maschiocchi, F; Perrin, E; Richeux, J P; Schroeter, R; Jover, G; Lux,; Rodriguez, A Y; Sánchez, F

    2007-01-01

    A large volume TPC will be used in the near future in a variety of experiments including T2K. The bulk Micromegas detector for this TPC is built using a novel production technique particularly suited for compact and robust low mass detectors. The capability to pave a large surface with a simple mounting solution and small dead space between modules is of particular interest for these applications. We have built several large bulk Micromegas detectors and we have tested them in the former HARP field cage setup with a magnetic field. Cosmic ray data have been acquired in a variety of experimental conditions. Good detector performances and space point resolution have been achieved.

  5. Large bulk Micromegas detectors for TPC applications

    CERN Document Server

    Anvar, S; Boyer, M; Beucher, J; Calvet, D; Colas, P; De La Broise, X; Delagnes, E; Delbart, A; Druillole, F; Emery, S; Giganti, C; Giomataris, I; Mazzucato, E; Monmarthe, E; Nizery, F; Pierre, F; Ritou, J L; Sarrat, A; Zito, M; Catanesi, M G; Radicioni, E; De Oliveira, R; Blondel, A; Di Marco, M; Ferrere, D; Perrin, E; Ravonel, M; Jover, G; Lux, T; Rodriguez, A Y; Sanchez, F; Cervera, A; Hansen, C; Monfregola, L

    2009-01-01

    A large volume TPC will be used in the near future in a variety of experiments including T2K. The bulk Micromegas detector for this TPC is built using a novel production technique particularly suited for compact, thin and robust low mass detectors. The capability to pave a large surface with a simple mounting solution and small dead space is of particular interest for these applications. We have built several large bulk Micromegas detectors () and we have tested one in the former HARP field cage with a magnetic field. Prototypes cards of the T2K front end electronics, based on the AFTER ASIC chip, have been used in this TPC test for the first time. Cosmic ray data have been acquired in a variety of experimental conditions. Good detector performances, space point resolution and energy loss measurement have been achieved.

  6. Structural determinants in the bulk heterojunction.

    Science.gov (United States)

    Acocella, Angela; Höfinger, Siegfried; Haunschmid, Ernst; Pop, Sergiu C; Narumi, Tetsu; Yasuoka, Kenji; Yasui, Masato; Zerbetto, Francesco

    2018-02-21

    Photovoltaics is one of the key areas in renewable energy research with remarkable progress made every year. Here we consider the case of a photoactive material and study its structural composition and the resulting consequences for the fundamental processes driving solar energy conversion. A multiscale approach is used to characterize essential molecular properties of the light-absorbing layer. A selection of bulk-representative pairs of donor/acceptor molecules is extracted from the molecular dynamics simulation of the bulk heterojunction and analyzed at increasing levels of detail. Significantly increased ground state energies together with an array of additional structural characteristics are identified that all point towards an auxiliary role of the material's structural organization in mediating charge-transfer and -separation. Mechanistic studies of the type presented here can provide important insights into fundamental principles governing solar energy conversion in next-generation photovoltaic devices.

  7. Induction detection of concealed bulk banknotes

    International Nuclear Information System (INIS)

    Fuller, Christopher; Chen, Antao

    2011-01-01

    Bulk cash smuggling is a serious issue that has grown in volume in recent years. By building on the magnetic characteristics of paper currency, induction sensing is found to be capable of quickly detecting large masses of banknotes. The results show that this method is effective in detecting bulk cash through concealing materials such as plastics, cardboards, fabrics and aluminum foil. The significant difference in the observed phase between the received signals caused by conducting materials and ferrite compounds, found in banknotes, provides a good indication that this process can overcome the interference by metal objects in a real sensing application. This identification strategy has the potential to not only detect the presence of banknotes, but also the number, while still eliminating false positives caused by metal objects

  8. Induction detection of concealed bulk banknotes

    Science.gov (United States)

    Fuller, Christopher; Chen, Antao

    2012-06-01

    The smuggling of bulk cash across borders is a serious issue that has increased in recent years. In an effort to curb the illegal transport of large numbers of paper bills, a detection scheme has been developed, based on the magnetic characteristics of bank notes. The results show that volumes of paper currency can be detected through common concealing materials such as plastics, cardboard, and fabrics making it a possible potential addition to border security methods. The detection scheme holds the potential of also reducing or eliminating false positives caused by metallic materials found in the vicinity, by observing the stark difference in received signals caused by metal and currency. The detection scheme holds the potential to detect for both the presence and number of concealed bulk notes, while maintaining the ability to reduce false positives caused by metal objects.

  9. Bulk immunoassays for analysis of extracellular vesicles.

    Science.gov (United States)

    Coumans, Frank A W; Gool, Elmar L; Nieuwland, Rienk

    2017-05-01

    There is increasing clinical interest in extracellular vesicles (EV) for diagnostic and treatment purposes. This review provides an overview of bulk immunoassays to analyse EV. Western blot and enzyme-linked immunosorbent assay are still the two predominant bulk immunoassays. Recently, new assays have become available that can detect exposure to EV concentrations that are up to 10,000-fold lower. This is advantageous for applications that detect rare EV. Other important parameters are the detectable concentration range, the required sample volume, whether simultaneous presence of different antigens on a single EV can be detected, size selectivity of each assay and practical considerations. In this review, we will explain the working principles of the traditional and novel assays together with their performance parameters. The most sensitive assays are micro-nuclear magnetic resonance, surface plasmon resonance, and time-resolved fluorescent immunoassay.

  10. A bulk viscosity driven inflationary model

    International Nuclear Information System (INIS)

    Waga, I.; Falcao, R.C.; Chanda, R.

    1985-01-01

    Bulk viscosity associated with the production of heavy particles during the GUT phase transition can lead to exponential or 'generalized' inflation. The condition of inflation proposed is independent of the details of the phase transition and remains unaltered in presence of a cosmological constant. Such mechanism avoids the extreme supercooling and reheating needed in the usual inflationary models. The standard baryongenesis mechanism can be maintained. (Author) [pt

  11. Depleted Bulk Heterojunction Colloidal Quantum Dot Photovoltaics

    KAUST Repository

    Barkhouse, D. Aaron R.

    2011-05-26

    The first solution-processed depleted bulk heterojunction colloidal quantum dot solar cells are presented. The architecture allows for high absorption with full depletion, thereby breaking the photon absorption/carrier extraction compromise inherent in planar devices. A record power conversion of 5.5% under simulated AM 1.5 illumination conditions is reported. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Towards a bulk theory of flexoelectricity.

    Science.gov (United States)

    Resta, Raffaele

    2010-09-17

    Flexoelectricity is the linear response of polarization to a strain gradient. Here we address the simplest class of dielectrics, namely, elemental cubic crystals, and we prove that therein there is no extrinsic (i.e., surface) contribution to flexoelectricity in the thermodynamic limit. The flexoelectric tensor is expressed as a bulk response of the solid, manifestly independent of surface configurations. Furthermore, we prove that the flexoelectric responses induced by a long-wavelength phonon and by a uniform strain gradient are identical.

  13. Towards a bulk theory of flexoelectricity

    OpenAIRE

    Resta, R.

    2010-01-01

    Flexoelectricity is the linear response of polarization to a strain gradient. Here we address the simplest class of dielectrics, namely elemental cubic crystals, and we prove that therein there is no extrinsic (i.e. surface) contribution to flexoelectricity in the thermodynamic limit. The flexoelectric tensor is expressed as a bulk response of the solid, manifestly independent of surface configurations. Furthermore, we prove that the flexoelectric responses induced by a long-wavelength phonon...

  14. Theory of thermal expansivity and bulk modulus

    International Nuclear Information System (INIS)

    Kumar, Munish

    2005-01-01

    The expression for thermal expansivity and bulk modulus, claimed by Shanker et al. to be new [Physica B 233 (1977) 78; 245 (1998) 190; J. Phys. Chem. Solids 59 (1998) 197] are compared with the theory of high pressure-high temperature reported by Kumar and coworkers. It is concluded that the Shanker formulation and the relations based on this are equal to the approach of Kumar et al. up to second order

  15. DEMONSTRATION BULK VITRIFICATION SYSTEM (DBVS) EXTERNAL REVIEW

    International Nuclear Information System (INIS)

    HONEYMAN, J.O.

    2007-01-01

    The Hanford mission to retrieve and immobilize 53 million gallons of radioactive waste from 177 underground storage tanks will be accomplished using a combination of processing by the waste treatment plant currently under construction, and a supplemental treatment that would process low-activity waste. Under consideration for this treatment is bulk vitrification, a versatile joule-heated melter technology which could be deployed in the tank farms. The Department proposes to demonstrate this technology under a Research, Development and Demonstration (RD and D) permit issued by the Washington State Department of Ecology using both non-radioactive simulant and blends of actual tank waste. From the demonstration program, data would be obtained on cost and technical performance to enable a decision on the potential use of bulk vitrification as the supplemental treatment technology for Hanford. An independent review by sixteen subject matter experts was conducted to assure that the technical basis of the demonstration facility design would be adequate to meet the objectives of the Demonstration Bulk Vitrification System (DBVS) program. This review explored all aspects of the program, including flowsheet chemistry, project risk, vitrification, equipment design and nuclear safety, and was carried out at a time when issues can be identified and corrected. This paper describes the mission need, review approach, technical recommendations and follow-on activities for the DBVS program

  16. Efeito de um programa de resistência muscular na capacidade funcional e na força muscular dos extensores do joelho em idosas pré-frágeis da comunidade: ensaio clínico aleatorizado do tipo crossover Impact of resistance exercise program on functional capacity and muscular strength of knee extensor in pre-frail community-dwelling older women: a randomized crossover trial

    Directory of Open Access Journals (Sweden)

    Lygia P. Lustosa

    2011-08-01

    Full Text Available CONTEXTUALIZAÇÃO: Na síndrome de fragilidade em idosos, há diminuição das reservas de energia e resistência aos estressores, com aumento da vulnerabilidade. OBJETIVO: Verificar o efeito do treinamento de força muscular com carga na capacidade funcional e força muscular dos extensores do joelho e sua associação, após treinamento, em idosas pré-frágeis da comunidade. MÉTODOS:Participaram 32 idosas, pré-frágeis, da comunidade. Excluíram-se aquelas com Miniexame do Estado Mental (MEEM incompatível; cirurgias ortopédicas dos membros inferiores; fraturas; doenças neurológicas; doenças inflamatórias agudas; neoplasias; atividade física regular; uso de medicamento com ação no sistema imunológico e sem marcha independente. Avaliou-se a capacidade funcional (Timed Up and Go - TUG e velocidade de marcha - TC10 e a força muscular dos extensores do joelho (Byodex System 3 Pro® nas velocidades angulares de 60 e 180(0/s. Para o fortalecimento muscular, utilizou-se carga de 75% de resistência máxima (1RM, durante dez semanas, três vezes/semana. A análise estatística foi feita pela ANOVA e Spearman (α=5%. RESULTADOS: Após o treinamento, houve melhora estatística do trabalho normalizado em 180(0/s (F=12,71, p=0,02, na potência, em 180(0/s (F=15,40, p=0,02 e na capacidade funcional (TUG, F=9,54, p=0,01; TC10, F=3,80, p=0,01. Houve boa correlação negativa significativa do TUG com as medidas de trabalho normalizado em 60 e 180(0/s (r=-0,65, p=0,01; r=-0,72, p=0,01. CONCLUSÃO: O treinamento produziu melhora da potência muscular e capacidade funcional. A melhora da potência associou-se à melhora funcional, importante variável para a qualidade de vida de idosas pré-frágeis. Artigo registrado no ISRCT register sob o número ISRCTN62824599.BACKGROUND: Frailty syndrome in elderly people is characterized by a reduction of energy reserves and also by a decreased of resistance to stressors, resulting in an increase of

  17. Impedance Spectroscopy and AC Conductivity Studies of Bulk 3-Amino-7-(dimethylamino)-2-methyl-hydrochloride

    Science.gov (United States)

    El-Shabaan, M. M.

    2018-02-01

    Impedance spectroscopy and alternating-current (AC) conductivity (σ AC) studies of bulk 3-amino-7-(dimethylamino)-2-methyl-hydrochloride (neutral red, NR) have been carried out over the temperature (T) range from 303 K to 383 K and frequency (f) range from 0.5 kHz to 5 MHz. Dielectric data were analyzed using the complex impedance (Z *) and complex electric modulus (M *) for bulk NR at various temperatures. The impedance loss peaks were found to shift towards high frequencies, indicating an increase in the relaxation time (τ 0) and loss in the material, with increasing temperature. For each temperature, a single depressed semicircle was observed at high frequencies, originating from the bulk transport, and a spike in the low-frequency region, resulting from the electrode effect. Fitting of these curves yielded an equivalent circuit containing a parallel combination of a resistance R and constant-phase element (CPE) Q. The carrier transport in bulk NR is governed by the correlated barrier hopping (CBH) mechanism, some parameters of which, such as the maximum barrier height (W M), charge density (N), and hopping distance (r), were determined as functions of both temperature and frequency. The frequency dependence of σ AC at different temperatures indicated that the conduction in bulk NR is a thermally activated process. The σ AC value at different frequencies increased linearly with temperature.

  18. Bulk Nanostructured FCC Steels With Enhanced Radiation Tolerance

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xinghang; Hartwig, K. Ted; Allen, Todd; Yang, Yong

    2012-10-27

    The objective of this project is to increase radiation tolerance in austenitic steels through optimization of grain size and grain boundary (GB) characteristics. The focus will be on nanocrystalline austenitic Fe-Cr-Ni alloys with an fcc crystal structure. The long-term goal is to design and develop bulk nanostructured austenitic steels with enhanced void swelling resistance and substantial ductility, and to enhance their creep resistance at elevated temperatures via GB engineering. The combination of grain refinement and grain boundary engineering approaches allows us to tailor the material strength, ductility, and resistance to swelling by 1) changing the sink strength for point defects, 2) by increasing the nucleation barriers for bubble formation at GBs, and 3) by changing the precipitate distributions at boundaries. Compared to ferritic/martensitic steels, austenitic stainless steels (SS) possess good creep and fatigue resistance at elevated temperatures, and better toughness at low temperature. However, a major disadvantage of austenitic SS is that they are vulnerable to significant void swelling in nuclear reactors, especially at the temperatures and doses anticipated in the Advanced Burner Reactor. The lack of resistance to void swelling in austenitic alloys led to the switch to ferritic/martensitic steels as the preferred material for the fast reactor cladding application. Recently a type of austenitic stainless steel, HT-UPS, was developed at ORNL, and is expected to show enhanced void swelling resistance through the trapping of point defects at nanometersized carbides. Reducing the grain size and increasing the fraction of low energy grain boundaries should reduce the available radiation-produced point defects (due to the increased sink area of the grain boundaries), should make bubble nucleation at the boundaries less likely (by reducing the fraction of high-energy boundaries), and improve the strength and ductility under radiation by producing a higher

  19. Distinct structures of scrapie prion protein (PrPSc)-seeded versus spontaneous recombinant prion protein fibrils revealed by hydrogen/deuterium exchange.

    Science.gov (United States)

    Smirnovas, Vytautas; Kim, Jae-Il; Lu, Xiaojun; Atarashi, Ryuichiro; Caughey, Byron; Surewicz, Witold K

    2009-09-04

    The detailed structures of prion disease-associated, partially protease-resistant forms of prion protein (e.g. PrP(Sc)) are largely unknown. PrP(Sc) appears to propagate itself by autocatalyzing the conformational conversion and oligomerization of normal prion protein (PrP(C)). One manifestation of PrP(Sc) templating activity is its ability, in protein misfolding cyclic amplification reactions, to seed the conversion of recombinant prion protein (rPrP) into aggregates that more closely resemble PrP(Sc) than spontaneously nucleated rPrP amyloids in terms of proteolytic fragmentation and infrared spectra. The absence of posttranslational modifications makes these rPrP aggregates more amenable to detailed structural analyses than bona fide PrP(Sc). Here, we compare the structures of PrP(Sc)-seeded and spontaneously nucleated aggregates of hamster rPrP by using H/D exchange coupled with mass spectrometry. In spontaneously formed fibrils, very slow H/D exchange in region approximately 163-223 represents a systematically H-bonded cross-beta amyloid core structure. PrP(Sc)-seeded aggregates have a subpopulation of molecules in which this core region extends N-terminally as far as to residue approximately 145, and there is a significant degree of order within residues approximately 117-133. The formation of tightly H-bonded structures by these more N-terminal residues may account partially for the generation of longer protease-resistant regions in the PrP(Sc)-seeded rPrP aggregates; however, part of the added protease resistance is dependent on the presence of SDS during proteolysis, emphasizing the multifactorial influences on proteolytic fragmentation patterns. These results demonstrate that PrP(Sc) has a distinct templating activity that induces ordered, systematically H-bonded structure in regions that are dynamic and poorly defined in spontaneously formed aggregates of rPrP.

  20. La-NMR study on a La dilute system of PrPb{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Tokunaga, Y; Sakai, H; Chudo, H; Kambe, S; Yasuoka, H [ASRC, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Suzuki, H S [National Institute for Materials Science, Tsukuba 305-0047 (Japan); Homma, Y; Aoki, D; Shiokawa, Y, E-mail: tokunaga.yo@jaea.go.j [IMR Tohoku University, Narita Oarai Higashiibaraki Ibaraki 311-1313 (Japan)

    2009-03-01

    We report the first {sup 139} La-NMR measurements on a La dilute system of PrPb{sub 3}. We have succeeded to detect {sup 139}La-NMR signal on a powder sample of Pr{sub 0.97}La{sub 0.03}Pb{sub 3} and extracted the temperature dependence of the Knight shift{sup 139}La K(T) in a temperature range between 1.5 and 220 K. K(T) has been found to maintain a linear relation with the bulk-susceptibility {sub chi}(T){sup bulk} in wide temperature range, except for a small deviation in the temperature region below 6 K. The slopes of the{sup 139} K vs nu{sup bulk} plots yield for the hyperfine coupling constants A{sub hf} the value 375 Oe/muB. From the NMR results, we discuss the effect of the La substitutions on microscopic magnetic properties of PrPb{sub 3}.

  1. Cancer de la próstata

    OpenAIRE

    Mendoza, Lupi Alejandro; Fundación Valle de Lili; Gutierrez, María Carolina; López Cardona, Arturo

    1997-01-01

    ¿Qué es la próstata?/¿Qué es la hiperplasia benigna de próstata?/El cáncer de próstata/¿Se hereda el cáncer de próstata?/¿Cómo se presenta y hacia donde se disemina el cáncer de próstata?/¿Cómo de descubre el cáncer de próstata?/¿Qué estudia la ultrasonografía transrectal o ecografía a través de recto?/¿Cómo se analizan los niveles de PSA?/¿Cómo se clasifica el cáncer de próstata?¿Cómo se determina la terapia más adecuada para un cáncer de próstata?/¿Cuáles son las opciones de tratamiento par...

  2. Pathogenesis of PR3-ANCA associated vasculitis

    NARCIS (Netherlands)

    Kallenberg, C. G. M.

    2008-01-01

    Wegener's Granulomatosis (WG) is closely associated with antineutrophil cytoplasmic autoantibodies (ANCA), particularly those directed to proteinase 3 (PR3). ANCA directed to myeloperoxidase (MPO) are associated with microscopic polyangiitis (MPA) and the Churg Strauss syndrome. PR3-ANCA associated

  3. High spin spectroscopy of Pr

    Indian Academy of Sciences (India)

    2001-07-31

    Jul 31, 2001 ... High spin states; nuclear structure; gamma-ray spectroscopy;. ½¿. Pr energy levels. PACS Nos 21.10.-k; 23.20.-g; 27.60.+j; 29.30.Kv. 1. Introduction. The transitional nuclei in the A. ½ ¼ region with N between 77 and 81 are interesting as it offer good scope to look for possible shape changes, similar to ...

  4. Technical trading rule performance in the second-hand asset markets in bulk shipping

    OpenAIRE

    Ådland, Roar Os

    2000-01-01

    This paper investigates the performance of technical trading rules applied to asset play in the international bulk shipping industry. The rules are tested on monthly returns in the Products Carrier segment for the period 1981 to 1998. The paper evaluates 1053 different parameterizations of three of the simplest and most popular trading rules in the financial markets: filter rules, moving averages, and support and resistance levels. Overall, the results provide strong support for the technical...

  5. Bruken av nasjonale prøver

    DEFF Research Database (Denmark)

    Skov, Poul

    2010-01-01

    Artiklen beskriver resultater fra en omfattende evaluering af brugen af de nationale prøver i norsk grundskole. De nationale prøver er blevet modtaget positivt af mange kommuner og skoleledere og i mindre grad af lærerne. Resultaterne viser også, at prøverne er styrende for undervisningen, at bru...

  6. Generation IV PR and PP methods and applications

    International Nuclear Information System (INIS)

    Bari, Robert A.

    2008-01-01

    This paper presents an evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems (NESs). For a proposed NES design, the methodology defines a set of challenges, analyzes system response to these challenges, and assesses outcomes. The challenges to the NES are the threats posed by potential actors (proliferant States or sub-national adversaries). The characteristics of Generation IV systems, both technical and institutional, are used to evaluate the response of the system and determine its resistance against proliferation threats and robustness against sabotage and terrorism threats. The outcomes of the system response are expressed in terms of six measures for PR and three measures for PP, which are the high-level PR and PP characteristics of the NES. The methodology is organized to allow evaluations to be performed at the earliest stages of system design and to become more detailed and more representative as design progresses. Uncertainty of results are recognized and incorporated into the evaluation at all stages. The results are intended for three types of users: system designers, program policy makers, and external stakeholders. Particular current relevant activities will be discussed in this regard. The methodology has been illustrated in a series of demonstration and case studies and these will be summarized in the paper. (author)

  7. CO and Soot Oxidation over Ce-Zr-Pr Oxide Catalysts.

    Science.gov (United States)

    Andana, Tahrizi; Piumetti, Marco; Bensaid, Samir; Russo, Nunzio; Fino, Debora; Pirone, Raffaele

    2016-12-01

    A set of ceria, ceria-zirconia (Ce 80 at.%, Zr 20 at.%), ceria-praseodymia (Ce 80 at.%, Pr 20 at.%) and ceria-zirconia-praseodymia (Ce 80 at.%, Zr 10 at.% and Pr 10 at.%) catalysts has been prepared by the solution combustion synthesis (SCS). The effects of Zr and Pr as dopants on ceria have been studied in CO and soot oxidation reactions. All the prepared catalysts have been characterized by complementary techniques, including XRD, FESEM, N2 physisorption at -196 °C, H2-temperature-programmed reduction, and X-ray photoelectron spectroscopy to investigate the relationships between the structure and composition of materials and their catalytic performance. Better results for CO oxidation have been obtained with mixed oxides (performance scale, Ce80Zr10Pr10 > Ce80Zr20 > Ce80Pr20) rather than pure ceria, thus confirming the beneficial role of multicomponent catalysts for this prototypical reaction. Since CO oxidation occurs via a Mars-van Krevelen (MvK)-type mechanism over ceria-based catalysts, it appears that the presence of both Zr and Pr species into the ceria framework improves the oxidation activity, via collective properties, such as electrical conductivity and surface or bulk oxygen anion mobility. On the other hand, this positive effect becomes less prominent in soot oxidation, since the effect of catalyst morphology prevails.

  8. Live imaging of prions reveals nascent PrPSc in cell-surface, raft-associated amyloid strings and webs.

    Science.gov (United States)

    Rouvinski, Alexander; Karniely, Sharon; Kounin, Maria; Moussa, Sanaa; Goldberg, Miri D; Warburg, Gabriela; Lyakhovetsky, Roman; Papy-Garcia, Dulce; Kutzsche, Janine; Korth, Carsten; Carlson, George A; Godsave, Susan F; Peters, Peter J; Luhr, Katarina; Kristensson, Krister; Taraboulos, Albert

    2014-02-03

    Mammalian prions refold host glycosylphosphatidylinositol-anchored PrP(C) into β-sheet-rich PrP(Sc). PrP(Sc) is rapidly truncated into a C-terminal PrP27-30 core that is stable for days in endolysosomes. The nature of cell-associated prions, their attachment to membranes and rafts, and their subcellular locations are poorly understood; live prion visualization has not previously been achieved. A key obstacle has been the inaccessibility of PrP27-30 epitopes. We overcame this hurdle by focusing on nascent full-length PrP(Sc) rather than on its truncated PrP27-30 product. We show that N-terminal PrP(Sc) epitopes are exposed in their physiological context and visualize, for the first time, PrP(Sc) in living cells. PrP(Sc) resides for hours in unexpected cell-surface, slow moving strings and webs, sheltered from endocytosis. Prion strings observed by light and scanning electron microscopy were thin, micrometer-long structures. They were firmly cell associated, resisted phosphatidylinositol-specific phospholipase C, aligned with raft markers, fluoresced with thioflavin, and were rapidly abolished by anti-prion glycans. Prion strings and webs are the first demonstration of membrane-anchored PrP(Sc) amyloids.

  9. Bulk Superconductivity and Disorder in Single Crystals of LaFePO

    Energy Technology Data Exchange (ETDEWEB)

    Analytis, James G.; Chu, Jiun-Haw; Erickson, Ann S.; Kucharczyk, Chris; /Stanford U., Appl. Phys. Dept.; Serafin, Alessandro; Carrington, Antony; /Bristol U.; Cox, Catherine; Kauzlarich, Susan M.; Hope, Hakon; /UC, Davis. Dept. Chem.

    2010-02-15

    We have studied the intrinsic normal and superconducting properties of the oxypnictide LaFePO. These samples exhibit bulk superconductivity and the evidence suggests that stoichiometric LaFePO is indeed superconducting, in contrast to other reports. We find that superconductivity is independent of the interplane residual resistivity {rho}{sub 0} and discuss the implications of this on the nature of the superconducting order parameter. Finally we find that, unlike T{sub c}, other properties in single-crystal LaFePO including the resistivity and magnetoresistance, can be very sensitive to disorder.

  10. Bond strength of hard chairside reline resins to a rapid polymerizing denture base resin before and after thermal cycling Resistência de união de resinas rígidas para reembasamento imediato a resina para base de prótese de rápida polimerização antes e após termociclagem

    Directory of Open Access Journals (Sweden)

    Karin Hermana Neppelenbroek

    2006-12-01

    Full Text Available PURPOSE: This study assessed the shear bond strength of 4 hard chairside reline resins (Kooliner, Tokuso Rebase Fast, Duraliner II, Ufi Gel Hard to a rapid polymerizing denture base resin (QC-20 processed using 2 polymerization cycles (A or B, before and after thermal cycling. MATERIALS AND METHODS: Cylinders (3.5 mm x 5.0 mm of the reline resins were bonded to cylinders of QC-20 polymerized using cycle A (boiling water-20 minutes or B (boiling water; remove heat-20 minutes; boiling water-20 minutes. For each reline resin/polymerization cycle combination, 10 specimens (groups CAt e CBt were thermally cycled (5 and 55 ºC; dwell time 30 seconds; 2,000 cycles; the other 10 were tested without thermal cycling (groups CAwt ad CBwt. Shear bond tests (0.5 mm/min were performed on the specimens and the failure mode was assessed. Data were analyzed by 3-way ANOVA and Newman-Keuls post-hoc test (alpha=.05. RESULTS: QC-20 resin demonstrated the lowest bond strengths among the reline materials (POBJETIVO: Esse estudo avaliou a resistência de união ao cisalhamento de 4 resinas rígidas para reembasamento imediato (Kooliner, Tokuso Rebase Fast, Duraliner II, Ufi Gel Hard a uma resina para base de prótese de rápida polimerização (QC-20 submetida a 2 ciclos de polimerização (A e B, antes e após termociclagem. MATERIAIS E MÉTODOS: Cilindros (3,5 mm x 5,0 mm das resinas reembasadoras foram unidas aos cilindros de resina QC-20 polimerizados pelo ciclo A (água fervente - 20 minutos ou B (água fervente; remoção do calor-20 minutos; água fervente-20 minutos. Para cada combinação resina reembasadora/ciclo de polimerização, 10 corpos-de-prova (grupos CAt e CBt foram termociclados (5 e 55 ºC; intervalo de tempo 30 segundos; 2.000 ciclos; os outros 10 foram testados sem termociclagem (grupos CAwt e CBwt. Os testes de resistência de união ao cisalhamento (0,5 mm/min foram realizados sobre os corpos-de-prova e o tipo de falha avaliado. Os dados foram

  11. Application of the GIF PR and PP methodology to a commercial fast reactor system for a preliminary analysis of PR scenarios

    International Nuclear Information System (INIS)

    Rossi, Fabiana

    2015-01-01

    The Generation IV International Forum (GIF) Proliferation Resistance and Physical Protection (PR and PP) Working Group has developed a methodology for the PR and PP evaluation of the next generation Nuclear Energy Systems (NESs). Following the methodology proposed by the working group, applicable to assessing the proliferation resistance of an NES and its individual elements, the main objective of this work is to apply the methodology to show an example of how its results could be used by designers to improve the PR of the system. In this study, the reactor site of a hypothetical and commercial sodium‑cooled fast neutron nuclear reactor system (SFR) was used as the target NES for the application of the methodology. The design of this SFR is based on the layout of the Japanese Sodium Fast Reactor (JSFR) with a safeguards design based on the safeguards approach of the Japanese prototype fast breeder reactor Monju. The methodology is applied to all the PR scenarios described in the methodology: diversion, misuse and breakout. The methodology was first applied to the SFR to check if this system meets the target of PR as described in the GIF goal; secondly, a comparison between the SFR and a light water reactor (LWR) with an open fuel cycle was performed to evaluate if and how it would be possible to improve the PR and PP of the SFR. The LWR layout is based on the European Pressurized Water Reactor. The comparison was implemented according to the following example development target: achieving proliferation resistance to material diversion similar or superior to domestic and international advanced LWR. Three main actions were performed: implement the evaluation methodology based on its assumptions; characterize the PR and PP for the nuclear energy system applying the methodology to the SFR; and identify recommendations for system designers through comparing the SFR with the LWR.

  12. Soy protein isolate molecular level contributions to bulk adhesive properties

    Science.gov (United States)

    Shera, Jeanne Norton

    Increasing environmental awareness and the recognized health hazards of formaldehyde-based resins has prompted a strong demand for environmentally-responsible adhesives for wood composites. Soy protein-based adhesives have been shown to be commercially viable with 90-day shelf stability and composite physical properties comparable to those of commercial formaldehyde-based particleboards. The main research focus is to isolate and characterize the molecular level features in soy protein isolate responsible for providing mechanical properties, storage stability, and water resistance during adhesive formulation, processing, and wood composite fabrication. Commercial composite board will be reviewed to enhance our understanding of the individual components and processes required for particleboard production. The levels of protein structure will be defined and an overview of current bio-based technology will be presented. In the process, the logic for utilizing soy protein as a sole binder in the adhesive will be reinforced. Variables such as adhesive components, pH, divalent ions, blend aging, protein molecular weight, formulation solids content, and soy protein functionalization will relate the bulk properties of soy protein adhesives to the molecular configuration of the soybean protein. This work has demonstrated that when intermolecular beta-sheet interactions and protein long-range order is disrupted, viscosity and mechanical properties decrease. Storage stability can be maintained through the stabilization of intermolecular beta-sheet interactions. When molecular weight is reduced through enzymatic digestion, long-range order is disrupted and viscosity and mechanical properties decrease accordingly. Processibility and physical properties must be balanced to increase solids while maintaining low viscosity, desirable mechanical properties, and adequate storage stability. The structure of the soybean protein must be related to the particleboard bulk mechanical

  13. Atmospheric bulk deposition of mercury in Denmark

    International Nuclear Information System (INIS)

    Jensen, A.

    1992-01-01

    Atmospheric bulk deposition of mercury has been measured in 1990/91 at 7 localities in Denmark at four coastal stations and three forest stations. At five localities duplicate samplers were set up to study the reproducibility of the samplers. At the localities with duplicate samplers one sample was analyzed by the Danish laboratory (FORCE Institutes) by radiochemical neutron activation analysis (RNAA) and by the Swedish Environmental Research Institute (IVL) with application of plasma emission spectrometry (AES) or atomic fluorescence spectrometry (AFS). The results showed no significant difference between the results of RNAA and AES at the 97.5% probability level. No significant difference was found for the methods RNAA and AFS. The reproducibility of the new samplers which were constructed by IVL for collection of precipitation and measurement of bulk deposition of mercury were excellent with no significant difference between the two parameters for the duplicate samplers. The yearly atmospheric bulk deposition rate of mercury was nearly identical at three of the coastal stations, between 7.4 - 9.2 μg/m 2 ,yr, and with higher values for the forest stations, 10.5 - 13.1 μg/m 2 ,yr. One coastal station had a higher depostion of 14.8 μg/m 2 ,yr which is in agreement with earlier findings based on a small number of precipitations events. Much lower values are found in this study in comparison with a Danish study from 1976/78 where 40 - 65 μg/m 2 ,yr were found. It is not possible to decide whether this difference is caused by reductions in inputs and/or different sampling techniques. (au)

  14. Electrocardiographic PR Interval Duration and Cardiovascular Risk

    DEFF Research Database (Denmark)

    Rasmussen, Peter Vibe; Nielsen, Jonas Bille; Skov, Morten Wagner

    2017-01-01

    Background Because of ambiguous reports in the literature, we aimed to investigate the association between PR interval and the risk of all-cause and cardiovascular death, heart failure, and pacemaker implantation, allowing for a nonlinear relationship. MethodsWe included 293,111 individuals...... into 7 groups based on the population PR interval distribution. Cox models were used, with reference to a PR interval between 152 and 161 ms (40th to ..., and 1805 pacemaker implantations. A short PR interval ( PR interval ( > 200 ms; HR, 1.23; 95% CI, 1.14-1.32; P

  15. Characterization and bulk properties of oxides

    International Nuclear Information System (INIS)

    Sonder, E.; Connolly, T.F.

    1979-06-01

    The bulk properties of oxides are divided into two classes, intrinsic properties which depend solely on the identity of the material, and extrinsic ones, which differ for different samples of the same compound. Sources of tabulated numerical values of intrinsic properties are given and modern developments in information storage and retrieval are discussed. Extrinsic properties are shown to depend on defects and trace impurities in the samples. Techniques of trace impurity analysis are discussed and realistic limits of detection and accuracies are given for routine analyses

  16. Forming of bulk metallic glass microcomponents

    DEFF Research Database (Denmark)

    Wert, John A.; Thomsen, Christian; Jensen, Rune Debel

    2009-01-01

    The present article considers forward extrusion, closed-die forging and backward extrusion processes for fabrication of individual microcomponents from two bulk metallic glass (BMG) compositions: Mg60Cu30Y10 and Zr44Cu40Ag8Al8. Two types of tooling were used in the present work: relatively massive...... die sets characteristic of cold forming operations for crystalline metals and lightweight die sets adapted to the special characteristics of BMGs. In addition to demonstrating that microcomponents of several geometries can be readily fabricated from BMGs, rheological properties are combined...

  17. Active neutron multiplicity counting of bulk uranium

    International Nuclear Information System (INIS)

    Ensslin, N.; Krick, M.S.; Langner, D.G.; Miller, M.C.

    1991-01-01

    This paper describes a new nondestructive assay technique being developed to assay bulk uranium containing kilogram quantities of 235 U. The new technique uses neutron multiplicity analysis of data collected with a coincidence counter outfitted with AmLi neutron sources. We have calculated the expected neutron multiplicity count rate and assay precision for this technique and will report on its expected performance as a function of detector design characteristics, 235 U sample mass, AmLi source strength, and source-to-sample coupling. 11 refs., 2 figs., 2 tabs

  18. Bulk monitoring and segregation of radioactive wastes

    International Nuclear Information System (INIS)

    Beddow, H.; Adsley, I.; Pearman, I.; Sweeney, A.; Davies, M.

    2014-01-01

    Several sites in the UK are contaminated by radioactive legacy wastes. These include; radium luminising sites and more recently the oil, and (potentially) fracking industries; sites contaminated from thorium gas mantle factories; old nuclear research sites; nuclear power sites, and the Sellafield reprocessing site. Nuvia has developed a suite of technologies to map the location of and to recover and process wastes during remedial operations. The main method for delineating contaminated areas in-situ is by use of the Groundhog system, whilst bulk monitoring methods employ the Gamma Excavation Monitor, the High Resolution Assay Monitor, and the Conveyor Active Particle System. (author)

  19. Towards bulk based preconditioning for quantum dotcomputations

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, Jack; Langou, Julien; Tomov, Stanimire; Channing,Andrew; Marques, Osni; Vomel, Christof; Wang, Lin-Wang

    2006-05-25

    This article describes how to accelerate the convergence of Preconditioned Conjugate Gradient (PCG) type eigensolvers for the computation of several states around the band gap of colloidal quantum dots. Our new approach uses the Hamiltonian from the bulk materials constituent for the quantum dot to design an efficient preconditioner for the folded spectrum PCG method. The technique described shows promising results when applied to CdSe quantum dot model problems. We show a decrease in the number of iteration steps by at least a factor of 4 compared to the previously used diagonal preconditioner.

  20. Improving the bulk data transfer experience

    Energy Technology Data Exchange (ETDEWEB)

    Guok, Chin; Guok, Chin; Lee, Jason R.; Berket, Karlo

    2008-05-07

    Scientific computations and collaborations increasingly rely on the network to provide high-speed data transfer, dissemination of results, access to instruments, support for computational steering, etc. The Energy Sciences Network is establishing a science data network to provide user driven bandwidth allocation. In a shared network environment, some reservations may not be granted due to the lack of available bandwidth on any single path. In many cases, the available bandwidth across multiple paths would be sufficient to grant the reservation. In this paper we investigate how to utilize the available bandwidth across multiple paths in the case of bulk data transfer.

  1. Bulk photoemission from metal films and nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ikhsanov, R Sh [Research Institute of Scientific Instruments, ' Rosatom' ' State Atomic Energy Corporation (Russian Federation); Babicheva, V E [Technical University of Denmark (Denmark); Protsenko, I E; Uskov, A V [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation); Guzhva, M E [St. Petersburg State Politechnical University, St. Petersburg (Russian Federation)

    2015-01-31

    Internal emission of photoelectrons from metal films and nanoparticles (nanowires and nanospheres) into a semiconductor matrix is studied theoretically by taking into account the jump of the effective electron mass at the metal – semiconductor interface and the cooling effect of hot electrons due to electron – electron collisions in the metal. The internal quantum efficiency of photoemission for the film and nanoparticles of two types (nanospheres and nanowires) is calculated. It is shown that the reduction of the effective mass of the electron during its transition from metal to semiconductor may lead to a significant (orders of magnitude and higher) decrease in the internal quantum efficiency of bulk photoemission. (nanostructures)

  2. Bulk metamaterials: Design, fabrication and characterization

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Malureanu, Radu; Alabastri, Alessandro

    2009-01-01

    Bulk metamaterials claim a lot of attention worldwide. We report about our activity and advances in design, fabrication and characterization of metal-dielectric composites with three-dimensional lattices. The nomenclature of designs exhibiting negative index behaviour in the near infrared includes...... ambiguity generic to the standard S-parameters retrieval method. Accurateness of the method is highlighted by a set of numerical checks. To fabricate smooth metal three-dimensional structures we develop an electroless chemical technique. We present the results of silver deposition on the surface of a 30...

  3. Calculated Bulk Properties of the Actinide Metals

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt; Andersen, O. K.; Johansson, B.

    1978-01-01

    Self-consistent relativistic calculations of the electronic properties for seven actinides (Ac-Am) have been performed using the linear muffin-tin orbitals method within the atomic-sphere approximation. Exchange and correlation were included in the local spin-density scheme. The theory explains...... the variation of the atomic volume and the bulk modulus through the 5f series in terms of an increasing 5f binding up to plutonium followed by a sudden localisation (through complete spin polarisation) in americium...

  4. 19 CFR 151.24 - Unlading facilities for bulk sugar.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Unlading facilities for bulk sugar. 151.24 Section... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Sugars, Sirups, and Molasses § 151.24 Unlading facilities for bulk sugar. When dutiable sugar is to be imported in bulk, a full...

  5. 7 CFR 58.313 - Print and bulk packaging rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Print and bulk packaging rooms. 58.313 Section 58.313 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....313 Print and bulk packaging rooms. Rooms used for packaging print or bulk butter and related products...

  6. Enhancement of surface magnetism due to bulk bond dilution

    International Nuclear Information System (INIS)

    Tsallis, C.; Sarmento, E.F.; Albuquerque, E.L. de

    1985-01-01

    Within a renormalization group scheme, the phase diagram of a semi-infinite simple cubic Ising ferromagnet is discussed, with arbitrary surface and bulk coupling constants, and including possible dilution of the bulk bonds. It is obtained that dilution makes easier the appearance of surface magnetism in the absence of bulk magnetism. (Author) [pt

  7. Effect of bulk modulus on performance of a hydrostatic transmission ...

    Indian Academy of Sciences (India)

    results demonstrates that bulk modulus should be considered as a variable parameter to obtain a more realistic model. Additionally, a PID controller is insufficient in presence of variable bulk modulus, whereas a fuzzy controller provides robust angular velocity control. Keywords. Hydrostatic transmission; bulk modulus; PID ...

  8. Accumulation of pathological prion protein PrPSc in the skin of animals with experimental and natural scrapie.

    Directory of Open Access Journals (Sweden)

    Achim Thomzig

    2007-05-01

    Full Text Available Prion infectivity and its molecular marker, the pathological prion protein PrP(Sc, accumulate in the central nervous system and often also in lymphoid tissue of animals or humans affected by transmissible spongiform encephalopathies. Recently, PrP(Sc was found in tissues previously considered not to be invaded by prions (e.g., skeletal muscles. Here, we address the question of whether prions target the skin and show widespread PrP(Sc deposition in this organ in hamsters perorally or parenterally challenged with scrapie. In hamsters fed with scrapie, PrP(Sc was detected before the onset of symptoms, but the bulk of skin-associated PrP(Sc accumulated in the clinical phase. PrP(Sc was localized in nerve fibres within the skin but not in keratinocytes, and the deposition of PrP(Sc in skin showed no dependence from the route of infection and lymphotropic dissemination. The data indicated a neurally mediated centrifugal spread of prions to the skin. Furthermore, in a follow-up study, we examined sheep naturally infected with scrapie and detected PrP(Sc by Western blotting in skin samples from two out of five animals. Our findings point to the skin as a potential reservoir of prions, which should be further investigated in relation to disease transmission.

  9. Surface and bulk conductivity of vanadium dioxide

    Science.gov (United States)

    Tutov, E. A.; Manannikov, A. V.; Al-Khafaji, H. I.; Zlomanov, V. P.

    2017-03-01

    The dc and ac resistances of a TR-68 thermistor based on the vanadium dioxide film have been measured and the temperature dependence of the resistance in the semiconductor-metal transition region under adsorption has been studied. The energy band model has been proposed, which explains the anomalous response to adsorption of donor gases by the inversion of the conductivity type of vanadium dioxide surface layers.

  10. Use of containers to carry bulk and break bulk commodities and its impact on gulf region ports and international trade.

    Science.gov (United States)

    2014-08-01

    The University of New Orleans Transportation Institute was tasked by the Louisiana Transportation Research Center (LTRC) in mid-2012 to assess the use of containers to transport bulk and break bulk commodities and to determine what their impact would...

  11. Estimation of the deoxynivalenol and moisture contents of bulk wheat grain samples by FT-NIR spectroscopy

    Science.gov (United States)

    Deoxynivalenol (DON) levels in harvested grain samples are used to evaluate the Fusarium head blight (FHB) resistance of wheat cultivars and breeding lines. Fourier transform near-infrared (FT-NIR) calibrations were developed to estimate the DON and moisture content (MC) of bulk wheat grain samples ...

  12. Transgenic Rabbits Expressing Ovine PrP Are Susceptible to Scrapie.

    Directory of Open Access Journals (Sweden)

    Pierre Sarradin

    2015-08-01

    Full Text Available Transmissible spongiform encephalopathies (TSEs are a group of neurodegenerative diseases affecting a wide range of mammalian species. They are caused by prions, a proteinaceous pathogen essentially composed of PrPSc, an abnormal isoform of the host encoded cellular prion protein PrPC. Constrained steric interactions between PrPSc and PrPC are thought to provide prions with species specificity, and to control cross-species transmission into other host populations, including humans. Transgenetic expression of foreign PrP genes has been successfully and widely used to overcome the recognized resistance of mouse to foreign TSE sources. Rabbit is one of the species that exhibit a pronounced resistance to TSEs. Most attempts to infect experimentally rabbit have failed, except after inoculation with cell-free generated rabbit prions. To gain insights on the molecular determinants of the relative resistance of rabbits to prions, we generated transgenic rabbits expressing the susceptible V136R154Q171 allele of the ovine PRNP gene on a rabbit wild type PRNP New Zealand background and assessed their experimental susceptibility to scrapie prions. All transgenic animals developed a typical TSE 6-8 months after intracerebral inoculation, whereas wild type rabbits remained healthy more than 700 days after inoculation. Despite the endogenous presence of rabbit PrPC, only ovine PrPSc was detectable in the brains of diseased animals. Collectively these data indicate that the low susceptibility of rabbits to prion infection is not enciphered within their non-PrP genetic background.

  13. A naturally occurring C-terminal fragment of the prion protein (PrP) delays disease and acts as a dominant-negative inhibitor of PrPSc formation.

    Science.gov (United States)

    Westergard, Laura; Turnbaugh, Jessie A; Harris, David A

    2011-12-23

    The cellular prion protein (PrPC) undergoes constitutive proteolytic cleavage between residues 111/112 to yield a soluble N-terminal fragment (N1) and a membrane-anchored C-terminal fragment (C1). The C1 fragment represents the major proteolytic fragment of PrPC in brain and several cell types. To explore the role of C1 in prion disease, we generated Tg(C1) transgenic mice expressing this fragment (PrP(Δ23-111)) in the presence and absence of endogenous PrP. In contrast to several other N-terminally deleted forms of PrP, the C1 fragment does not cause a spontaneous neurological disease in the absence of endogenous PrP. Tg(C1) mice inoculated with scrapie prions remain healthy and do not accumulate protease-resistant PrP, demonstrating that C1 is not a substrate for conversion to PrPSc (the disease-associated isoform). Interestingly, Tg(C1) mice co-expressing C1 along with wild-type PrP (either endogenous or encoded by a second transgene) become ill after scrapie inoculation, but with a dramatically delayed time course compared with mice lacking C1. In addition, accumulation of PrPSc was markedly slowed in these animals. Similar effects were produced by a shorter C-terminal fragment of PrP(Δ23-134). These results demonstrate that C1 acts as dominant-negative inhibitor of PrPSc formation and accumulation of neurotoxic forms of PrP. Thus, C1, a naturally occurring fragment of PrPC, might play a modulatory role during the course of prion diseases. In addition, enhancing production of C1, or exogenously administering this fragment, represents a potential therapeutic strategy for the treatment of prion diseases.

  14. Sc237 hamster PrPSc and Sc237-derived mouse PrPSc generated by interspecies in vitro amplification exhibit distinct pathological and biochemical properties in tga20 transgenic mice.

    Science.gov (United States)

    Yoshioka, Miyako; Imamura, Morikazu; Okada, Hiroyuki; Shimozaki, Noriko; Murayama, Yuichi; Yokoyama, Takashi; Mohri, Shirou

    2011-05-01

    Prions are the infectious agents responsible for transmissible spongiform encephalopathy, and are primarily composed of the pathogenic form (PrP(Sc)) of the host-encoded prion protein (PrP(C)). Recent studies have revealed that protein misfolding cyclic amplification (PMCA), a highly sensitive method for PrP(Sc) detection, can overcome the species barrier in several xenogeneic combinations of PrP(Sc) seed and PrP(C) substrate. Although these findings provide valuable insight into the origin and diversity of prions, the differences between PrP(Sc) generated by interspecies PMCA and by in vivo cross-species transmission have not been described. This study investigated the histopathological and biochemical properties of PrP(Sc) in the brains of tga20 transgenic mice inoculated with Sc237 hamster scrapie prion and PrP(Sc) from mice inoculated with Sc237-derived mouse PrP(Sc), which had been generated by interspecies PMCA using Sc237 as seed and normal mouse brain homogenate as substrate. Tga20 mice overexpressing mouse PrP(C) were susceptible to Sc237 after primary transmission. PrP(Sc) in the brains of mice inoculated with Sc237-derived mouse PrP(Sc) and in the brains of mice inoculated with Sc237 differed in their lesion profiles and accumulation patterns, Western blot profiles, and denaturant resistance. In addition, these PrP(Sc) exhibited distinctive virulence profiles upon secondary passage. These results suggest that different in vivo and in vitro environments result in propagation of PrP(Sc) with different biological properties. © 2011 The Societies and Blackwell Publishing Asia Pty Ltd.

  15. The Bulk Channel in Thermal Gauge Theories

    CERN Document Server

    Meyer, Harvey B

    2010-01-01

    We investigate the thermal correlator of the trace of the energy-momentum tensor in the SU(3) Yang-Mills theory. Our goal is to constrain the spectral function in that channel, whose low-frequency part determines the bulk viscosity. We focus on the thermal modification of the spectral function, $\\rho(\\omega,T)-\\rho(\\omega,0)$. Using the operator-product expansion we give the high-frequency behavior of this difference in terms of thermodynamic potentials. We take into account the presence of an exact delta function located at the origin, which had been missed in previous analyses. We then combine the bulk sum rule and a Monte-Carlo evaluation of the Euclidean correlator to determine the intervals of frequency where the spectral density is enhanced or depleted by thermal effects. We find evidence that the thermal spectral density is non-zero for frequencies below the scalar glueball mass $m$ and is significantly depleted for $m\\lesssim\\omega\\lesssim 3m$.

  16. Elastic properties of superconducting bulk metallic glasses

    International Nuclear Information System (INIS)

    Hempel, Marius

    2015-01-01

    Within the framework of this thesis the elastic properties of a superconducting bulk metallic glass between 10 mK and 300 K were first investigated. In order to measure the entire temperature range, in particular the low temperature part, new experimental techniques were developed. Using an inductive readout scheme for a double paddle oscillator it was possible to determine the internal friction and the relative change of sound velocity of bulk metallic glasses with high precision. This allowed for a detailed comparison of the data with different models. The analysis focuses on the low temperature regime where the properties of glassy materials are governed by atomic tunneling systems as described by the tunneling model. The influence of conduction electrons in the normal conducting state and quasiparticles in the superconducting state of the glass were accounted for in the theoretical description, resulting in a good agreement over a large temperature range between measured data and prediction of the tunneling model. This allowed for a direct determination of the coupling constant between electrons and tunneling systems. In the vicinity of the transition temperature Tc the data can only be described if a modified distribution function of the tunneling parameters is applied.

  17. Perovskite oxides: Oxygen electrocatalysis and bulk structure

    Science.gov (United States)

    Carbonio, R. E.; Fierro, C.; Tryk, D.; Scherson, D.; Yeager, Ernest

    1987-01-01

    Perovskite type oxides were considered for use as oxygen reduction and generation electrocatalysts in alkaline electrolytes. Perovskite stability and electrocatalytic activity are studied along with possible relationships of the latter with the bulk solid state properties. A series of compounds of the type LaFe(x)Ni1(-x)O3 was used as a model system to gain information on the possible relationships between surface catalytic activity and bulk structure. Hydrogen peroxide decomposition rate constants were measured for these compounds. Ex situ Mossbauer effect spectroscopy (MES), and magnetic susceptibility measurements were used to study the solid state properties. X ray photoelectron spectroscopy (XPS) was used to examine the surface. MES has indicated the presence of a paramagnetic to magnetically ordered phase transition for values of x between 0.4 and 0.5. A correlation was found between the values of the MES isomer shift and the catalytic activity for peroxide decomposition. Thus, the catalytic activity can be correlated to the d-electron density for the transition metal cations.

  18. Perovskite oxides: Oxygen electrocatalysis and bulk structure

    Science.gov (United States)

    Carbonio, R. E.; Fierro, C.; Tryk, D.; Scherson, D.; Yeager, Ernest

    1987-09-01

    Perovskite type oxides were considered for use as oxygen reduction and generation electrocatalysts in alkaline electrolytes. Perovskite stability and electrocatalytic activity are studied along with possible relationships of the latter with the bulk solid state properties. A series of compounds of the type LaFe(x)Ni1(-x)O3 was used as a model system to gain information on the possible relationships between surface catalytic activity and bulk structure. Hydrogen peroxide decomposition rate constants were measured for these compounds. Ex situ Mossbauer effect spectroscopy (MES), and magnetic susceptibility measurements were used to study the solid state properties. X ray photoelectron spectroscopy (XPS) was used to examine the surface. MES has indicated the presence of a paramagnetic to magnetically ordered phase transition for values of x between 0.4 and 0.5. A correlation was found between the values of the MES isomer shift and the catalytic activity for peroxide decomposition. Thus, the catalytic activity can be correlated to the d-electron density for the transition metal cations.

  19. Negative ion extraction from hydrogen plasma bulk

    Energy Technology Data Exchange (ETDEWEB)

    Oudini, N. [Istituto di Metodologie Inorganiche e dei Plasmi, CNR, via Amendola 122/D, 70126 Bari (Italy); Laboratoire des plasma de décharges, Centre de Développement des Technologies Avancées, Cité du 20 Aout BP 17 Baba Hassen, 16081 Algiers (Algeria); Taccogna, F.; Minelli, P. [Istituto di Metodologie Inorganiche e dei Plasmi, CNR, via Amendola 122/D, 70126 Bari (Italy); Aanesland, A.; Raimbault, J.-L. [Laboratoire de Physique des Plasmas, École Polytechnique, 91128 Palaiseau Cedex (France)

    2013-10-15

    A two-dimensional particle-in-cell/Monte Carlo collision model has been developed and used to study low electronegative magnetized hydrogen plasma. A configuration characterized by four electrodes is used: the left electrode is biased at V{sub l} = −100 V, the right electrode is grounded, while the upper and lower transversal electrodes are biased at an intermediate voltage V{sub ud} between 0 and −100 V. A constant and homogeneous magnetic field is applied parallel to the lateral (left/right) electrodes. It is shown that in the magnetized case, the bulk plasma potential is close to the transversal electrodes bias inducing then a reversed sheath in front of the right electrode. The potential drop within the reversed sheath is controlled by the transversal electrodes bias allowing extraction of negative ions with a significant reduction of co-extracted electron current. Furthermore, introducing plasma electrodes, between the transversal electrodes and the right electrode, biased with a voltage just above the plasma bulk potential, increases the negative ion extracted current and decreases significantly the co-extracted electron current. The physical mechanism on basis of this phenomenon has been discussed.

  20. Bulk magnetic domain stability controls paleointensity fidelity

    Science.gov (United States)

    Paterson, Greig A.; Muxworthy, Adrian R.; Yamamoto, Yuhji; Pan, Yongxin

    2017-12-01

    Nonideal, nonsingle-domain magnetic grains are ubiquitous in rocks; however, they can have a detrimental impact on the fidelity of paleomagnetic records—in particular the determination of ancient magnetic field strength (paleointensity), a key means of understanding the evolution of the earliest geodynamo and the formation of the solar system. As a consequence, great effort has been expended to link rock magnetic behavior to paleointensity results, but with little quantitative success. Using the most comprehensive rock magnetic and paleointensity data compilations, we quantify a stability trend in hysteresis data that characterizes the bulk domain stability (BDS) of the magnetic carriers in a paleomagnetic specimen. This trend is evident in both geological and archeological materials that are typically used to obtain paleointensity data and is therefore pervasive throughout most paleomagnetic studies. Comparing this trend to paleointensity data from both laboratory and historical experiments reveals a quantitative relationship between BDS and paleointensity behavior. Specimens that have lower BDS values display higher curvature on the paleointensity analysis plot, which leads to more inaccurate results. In-field quantification of BDS therefore reflects low-field bulk remanence stability. Rapid hysteresis measurements can be used to provide a powerful quantitative method for preselecting paleointensity specimens and postanalyzing previous studies, further improving our ability to select high-fidelity recordings of ancient magnetic fields. BDS analyses will enhance our ability to understand the evolution of the geodynamo and can help in understanding many fundamental Earth and planetary science questions that remain shrouded in controversy.

  1. Bow hull-form optimization in waves of a 66,000 DWT bulk carrier

    Directory of Open Access Journals (Sweden)

    Jin-Won Yu

    2017-09-01

    Full Text Available This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance in calm water and added resistance in regular head wave of λ/L = 0.5. WAVIS version 1.3 is used to obtain wave-making resistance. The modified Fujii and Takahashi's formula is applied to obtain the added resistance in short wave. The PSO algorithm is employed for the optimization technique. The resistance and motion characteristics in calm water and regular and irregular head waves of the three hull forms are compared. It has been shown that the optimal brings 13.2% reduction in the wave-making resistance and 13.8% reduction in the added resistance at λ/L = 0.5; and the mean added resistance reduces by 9.5% at sea state 5.

  2. Isothermal sections of the state diagram for the Pr-Ni-Ge system at 870 (0-0,5Pr) and 670 K (0,5-1Pr)

    International Nuclear Information System (INIS)

    Fedyna, M.F.; Pecharskij, V.K.; Bodak, O.I.

    1987-01-01

    Method of X-ray phase and microstructural analyses were used to study Pr-Ni-Ge ternary system at 870K (0-0.50 at.fractions of Pr) and 670K (0.50-1.00 at.fractions of Pr). 11 ternary compounds exist in the system: Pr 1-x (NiGe) 13 (x=0.24), PrNi 2 Ge 2 , Pr 2 Ni 3 Ge 5 , PrNiGe 3 , Pr 2 NiGe 6 , Pr 3 Ni 4 Ge 4 , PrNi (1-x) Ge 2 (x=0.33), PrNiGe, Pr(NiGe) 2-x (x=0.14), Pr 3 NiGe 2 , ∼Pr 5 NiGe 4 . Crystal structure was determined for seven ternary compounds

  3. 78 FR 72841 - List of Bulk Drug Substances That May Be Used in Pharmacy Compounding; Bulk Drug Substances That...

    Science.gov (United States)

    2013-12-04

    .... FDA-2013-N-1525] List of Bulk Drug Substances That May Be Used in Pharmacy Compounding; Bulk Drug... proposed rule to list bulk drug substances used in pharmacy compounding and preparing to develop a list of... Formulary monograph, if a monograph exists, and the United States Pharmacopoeia chapter on pharmacy...

  4. Bulk outlet temperature limits and increased reactor power levels

    Energy Technology Data Exchange (ETDEWEB)

    Jones, S.S.

    1958-06-13

    In a recent report, means of circumventing the present bulk temperature limits are suggested. These have definite merit but do not present an over-all picture of the problem. Therefore, this bulk temperature limit is reviewed in order to place the problem in its full perspective. A program of action is suggested that should lead to: Revised operating conditions and process piping to obtain higher power levels at the same bulk outlet temperature; The completion of production tests to permit higher bulk outlet temperatures with no significant changes in reactor piping; or Redesign of the effluent system to eliminate bulk temperatures as a reactor operating limit.

  5. Low Prevalence of Cfr-Mediated Linezolid Resistance among Methicillin-Resistant Staphylococcus aureus in a Spanish Hospital: Case Report on Linezolid Resistance Acquired during Linezolid Therapy

    OpenAIRE

    Sierra, Josep M.; Camoez, Mariana; Tubau, Fe; Gasch, Oriol; Pujol, Miquel; Martin, Rogelio; Dom?nguez, M. Angeles

    2013-01-01

    Linezolid is an effective antimicrobial agent to treat methicillin-resistant Staphylococcus aureus (MRSA). Resistance to linezolid due to the cfr gene is described worldwide. The present study aimed to analyze the prevalence of the cfr-mediated linezolid resistance among MRSA clinical isolates in our area. A very low prevalence of cfr mediated linezolid resistance was found: only one bacteremic isolate out of 2 215 screened isolates. The only linezolid resistant isolate arose in a patient, pr...

  6. Mutant PrPSc Conformers Induced by a Synthetic Peptide and Several Prion Strains

    Science.gov (United States)

    Tremblay, Patrick; Ball, Haydn L.; Kaneko, Kiyotoshi; Groth, Darlene; Hegde, Ramanujan S.; Cohen, Fred E.; DeArmond, Stephen J.; Prusiner, Stanley B.; Safar, Jiri G.

    2004-01-01

    Gerstmann-Sträussler-Scheinker (GSS) disease is a dominantly inherited, human prion disease caused by a mutation in the prion protein (PrP) gene. One mutation causing GSS is P102L, denoted P101L in mouse PrP (MoPrP). In a line of transgenic mice denoted Tg2866, the P101L mutation in MoPrP produced neurodegeneration when expressed at high levels. MoPrPSc(P101L) was detected both by the conformation-dependent immunoassay and after protease digestion at 4°C. Transmission of prions from the brains of Tg2866 mice to those of Tg196 mice expressing low levels of MoPrP(P101L) was accompanied by accumulation of protease-resistant MoPrPSc(P101L) that had previously escaped detection due to its low concentration. This conformer exhibited characteristics similar to those found in brain tissue from GSS patients. Earlier, we demonstrated that a synthetic peptide harboring the P101L mutation and folded into a β-rich conformation initiates GSS in Tg196 mice (29). Here we report that this peptide-induced disease can be serially passaged in Tg196 mice and that the PrP conformers accompanying disease progression are conformationally indistinguishable from MoPrPSc(P101L) found in Tg2866 mice developing spontaneous prion disease. In contrast to GSS prions, the 301V, RML, and 139A prion strains produced large amounts of protease-resistant PrPSc in the brains of Tg196 mice. Our results argue that MoPrPSc(P101L) may exist in at least several different conformations, each of which is biologically active. Such conformations occurred spontaneously in Tg2866 mice expressing high levels of MoPrPC(P101L) as well as in Tg196 mice expressing low levels of MoPrPC(P101L) that were inoculated with brain extracts from ill Tg2866 mice, with a synthetic peptide with the P101L mutation and folded into a β-rich structure, or with prions recovered from sheep with scrapie or cattle with bovine spongiform encephalopathy. PMID:14747574

  7. Technical issues of a high-Tc superconducting bulk magnet

    Science.gov (United States)

    Fujimoto, Hiroyuki

    2000-06-01

    Superconducting magnets made of high-Tc superconductors are promising for industrial applications. It is well known that REBa2Cu3O7-x superconductors prepared by melt processes have a high critical current density, Jc, at 77 K and high magnetic fields. The materials are very promising for high magnetic field applications as a superconducting permanent/bulk magnet with liquid-nitrogen refrigeration. Light rare-earth (LRE) BaCuO bulks, compared with REBaCuO bulks, exhibit a larger Jc in high magnetic fields and a much improved irreversibility field, Hirr, at 77 K. In this study, we discuss technical issues of a high-Tc superconducting bulk magnet, namely the aspects of the melt processing for bulk superconductors, their characteristic superconducting properties and mechanical properties, and trapped field properties of a superconducting bulk magnet. One of the possible applications is a superconducting bulk magnet for the magnetically levitated (Maglev) train in the future.

  8. Outwitting the series resistance in scanning spreading resistance microscopy

    International Nuclear Information System (INIS)

    Schulze, A.; Cao, R.; Eyben, P.; Hantschel, T.; Vandervorst, W.

    2016-01-01

    The performance of nanoelectronics devices critically depends on the distribution of active dopants inside these structures. For this reason, dopant profiling has been defined as one of the major metrology challenges by the international technology roadmap of semiconductors. Scanning spreading resistance microscopy (SSRM) has evolved as one of the most viable approaches over the last decade due to its excellent spatial resolution, sensitivity and quantification accuracy. However, in case of advanced device architectures like fins and nanowires a proper measurement of the spreading resistance is often hampered by the increasing impact of parasitic series resistances (e.g. bulk series resistance) arising from the confined nature of the aforementioned structures. In order to overcome this limitation we report in this paper the development and implementation of a novel SSRM mode (fast Fourier transform-SSRM: FFT-SSRM) which essentially decouples the spreading resistance from parasitic series resistance components. We show that this can be achieved by a force modulation (leading to a modulated spreading resistance signal) in combination with a lock-in deconvolution concept. In this paper we first introduce the principle of operation of the technique. We discuss in detail the underlying physical mechanisms as well as the technical implementation on a state-of-the-art atomic force microscope (AFM). We demonstrate the performance of FFT-SSRM and its ability to remove substantial series resistance components in practice. Eventually, the possibility of decoupling the spreading resistance from the intrinsic probe resistance will be demonstrated and discussed. - Highlights: • A novel electrical AFM mode for carrier profiling in confined volumes is presented. • Thereby the force and hence the contact area between AFM probe and sample is modulated. • Information on the spreading resistance is derived using a lock-in approach. • Bulk series resistance components are

  9. 75 FR 34573 - Bulk Solid Hazardous Materials: Harmonization With the International Maritime Solid Bulk Cargoes...

    Science.gov (United States)

    2010-06-17

    ... Pollution from Ships MISLE Marine Information for Safety and Law Enforcement MHB Materials Hazardous only in Bulk MSDS Material Safety Data Sheet NCB National Cargo Bureau NEPA National Environmental Policy Act... material safety data sheet (MSDS) address some portions of proposed Sec. 148.60. We agree with the comment...

  10. Influences of Pr and Ta doping concentration on the characteristic features of FTO thin film deposited by spray pyrolysis

    International Nuclear Information System (INIS)

    Turgut, Güven; Koçyiğit, Adem; Sönmez, Erdal

    2015-01-01

    The Pr and Ta separately doped FTO (10 at.% F incorporated SnO 2 ) films are fabricated via spray pyrolysis. The microstructural, topographic, optical, and electrical features of fluorine-doped TO (FTO) films are investigated as functions of Pr and Ta dopant concentrations. The x-ray diffraction (XRD) measurements reveal that all deposited films show polycrystalline tin oxide crystal property. FTO film has (200) preferential orientation, but this orientation changes to (211) direction with Pr and Ta doping ratio increasing. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) analyses show that all films have uniform and homogenous nanoparticle distributions. Furthermore, morphologies of the films depend on the ratio between Pr and Ta dopants. From ultraviolet-visible (UV-Vis) spectrophotometer measurements, it is shown that the transmittance value of FTO film decreases with Pr and Ta doping elements increasing. The band gap value of FTO film increases only at 1 at.% Ta doping level, it drops off with Pr and Ta doping ratio increasing at other doped FTO films. The electrical measurements indicate that the sheet resistance value of FTO film initially decreases with Pr and Ta doping ratio decreasing and then it increases with Pr and Ta doping ratio increasing. The highest value of figure of merit is obtained for 1 at.% Ta- and Pr-doped FTO film. These results suggest that Pr- and Ta-doped FTO films may be appealing candidates for TCO applications. (paper)

  11. Identification and expression analysis of a pathogenresponsive PR ...

    African Journals Online (AJOL)

    related (PR) proteins. PR-1 genes represent the first identified PR gene family. Most members of PR-1 gene family are not inducible by pathogen attacks. In this study, we identified a pathogen-responsive PR-1 gene designated as VqPR-1 ...

  12. Quadrupolar interactions in Pr compounds: PrFe4P12 and PrBa2Cu3O6

    International Nuclear Information System (INIS)

    Kiss, Annamaria; Fazekas, P

    2003-01-01

    We examine Pr 3+ crystal field models with near-degeneracy of the two lowest crystal field levels, where interaction-induced quadrupolar and dipolar moments are as important as the permanent moments of the crystal field ground state. We find that the Γ 1 -Γ 4 level scheme yields a successful description of the antiferroquadrupolar ordering of PrFe 4 P 12 . For PrBa 2 Cu 3 O 6 , we argue that quadrupolar interaction is important for understanding the Pr ordering transition at 11 K

  13. A route to transparent bulk metals

    KAUST Repository

    Schwingenschlögl, Udo

    2012-07-23

    Hypothetical compounds based on a sapphire host are investigated with respect to their structural as well as electronic features. The results are obtained by electronic structure calculations within density functional theory and the generalized gradient approximation. A quarter of the Al atoms in Al 2O 3 is replaced by a 4d transition metal M ion, with d 0 to d 9 electronic configuration. We perform structure optimizations for all the compounds and analyze the electronic states. Due to the sizeable band gap of the Al 2O 3 host, we can identify promising candidates for transparent bulk metals. We explain the mechanisms leading to this combination of materials properties. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Holographic bulk viscosity: GPR vs EO

    CERN Document Server

    Buchel, Alex; Kiritsis, Elias

    2011-01-01

    Recently Eling and Oz (EO) proposed a formula for the holographic bulk viscosity, in arXiv:1103.1657, derived from the null horizon focusing equation. This formula seems different from that obtained earlier by Gubser, Pufu and Rocha (GPR) in arXiv:0806.0407 calculated from the IR limit of the two-point function of the trace of the stress tensor. The two were shown to agree only for some simple scaling cases. We point out that the two formulae agree in two non-trivial holographic theories describing RG flows. The first is the strongly coupled N=2* gauge theory plasma. The second is the semi-phenomenological model of Improved Holographic QCD.

  15. Internal shear cracking in bulk metal forming

    DEFF Research Database (Denmark)

    Christiansen, Peter; Nielsen, Chris Valentin; Bay, Niels Oluf

    2017-01-01

    This paper presents an uncoupled ductile damage criterion for modelling the opening and propagation of internal shear cracks in bulk metal forming. The criterion is built upon the original work on the motion of a hole subjected to shear with superimposed tensile stress triaxiality and its overall...... performance is evaluated by means of side-pressing formability tests in Aluminium AA2007-T6 subjected to different levels of pre-strain. Results show that the new proposed criterionis able to combine simplicity with efficiency for predicting the onset of fracture and the crack propagation path for the entire...... set of test cases regardless the amount of pre-strain derived from previous upsetting under near frictionless conditions. The new proposed criterion can be easily implemented in existing finite element programs and its scope of application allows extending previous work on the opening modes in surface...

  16. Generation and Stability of Bulk Nanobubbles.

    Science.gov (United States)

    Oh, Seung Hoon; Kim, Jong-Min

    2017-04-18

    Recently, extremely small bubbles, referred to as nanobubbles, have drawn increased attention due to their novel properties and great potential for various applications. In this study, a novel method for the generation of bulk nanobubbles (BNBs) was introduced, and stability of fabricated BNBs was investigated. BNBs were created from CO 2 gas with a mixing method; the chemical identity and phase state of these bubbles can be determined via infrared spectroscopy. The presence of BNBs was observed with a nanoparticle tracking analysis (NTA). The ATR-FTIR spectra of BNBs indicate that the BNBs were filled with CO 2 gas. Furthermore, the BNB concentration and its ζ-potential were about 2.94 × 10 8 particles/mL and -20 mV, respectively (24 h after BNB generation with a mixing time of 120 min). This indicates the continued existence and stability of BNBs in water for an extended period of time.

  17. Organic hybrid planar-nanocrystalline bulk heterojunctions

    Science.gov (United States)

    Forrest, Stephen R [Ann Arbor, MI; Yang, Fan [Piscataway, NJ

    2011-03-01

    A photosensitive optoelectronic device having an improved hybrid planar bulk heterojunction includes a plurality of photoconductive materials disposed between the anode and the cathode. The photoconductive materials include a first continuous layer of donor material and a second continuous layer of acceptor material. A first network of donor material or materials extends from the first continuous layer toward the second continuous layer, providing continuous pathways for conduction of holes to the first continuous layer. A second network of acceptor material or materials extends from the second continuous layer toward the first continuous layer, providing continuous pathways for conduction of electrons to the second continuous layer. The first network and the second network are interlaced with each other. At least one other photoconductive material is interspersed between the interlaced networks. This other photoconductive material or materials has an absorption spectra different from the donor and acceptor materials.

  18. Solid state properties from bulk to nano

    CERN Document Server

    Dresselhaus, Mildred; Cronin, Stephen; Gomes Souza Filho, Antonio

    2018-01-01

    This book fills a gap between many of the basic solid state physics and materials science books that are currently available. It is written for a mixed audience of electrical engineering and applied physics students who have some knowledge of elementary undergraduate quantum mechanics and statistical mechanics. This book, based on a successful course taught at MIT, is divided pedagogically into three parts: (I) Electronic Structure, (II) Transport Properties, and (III) Optical Properties. Each topic is explained in the context of bulk materials and then extended to low-dimensional materials where applicable. Problem sets review the content of each chapter to help students to understand the material described in each of the chapters more deeply and to prepare them to master the next chapters.

  19. Tuneable film bulk acoustic wave resonators

    CERN Document Server

    Gevorgian, Spartak Sh; Vorobiev, Andrei K

    2013-01-01

    To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high.  Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the softwa...

  20. Bulk-Induced 1/f Noise at the Surface of Three-Dimensional Topological Insulators.

    Science.gov (United States)

    Bhattacharyya, Semonti; Banerjee, Mitali; Nhalil, Hariharan; Islam, Saurav; Dasgupta, Chandan; Elizabeth, Suja; Ghosh, Arindam

    2015-12-22

    Slow intrinsic fluctuations of resistance, also known as the flicker noise or 1/f-noise, in the surface transport of strong topological insulators (TIs) is a poorly understood phenomenon. Here, we have systematically explored the 1/f-noise in field-effect transistors (FET) of mechanically exfoliated Bi1.6Sb0.4Te2Se TI films when transport occurs predominantly via the surface states. We find that the slow kinetics of the charge disorder within the bulk of the TI induces mobility fluctuations at the surface, providing a new source of intrinsic 1/f-noise that is unique to bulk TI systems. At small channel thickness, the noise magnitude can be extremely small, corresponding to the phenomenological Hooge parameter γH as low as ≈10(-4), but it increases rapidly when channel thickness exceeds ∼1 μm. From the temperature (T)-dependence of noise, which displayed sharp peaks at characteristic values of T, we identified generation-recombination processes from interband transitions within the TI bulk as the dominant source of the mobility fluctuations in surface transport. Our experiment not only establishes an intrinsic microscopic origin of noise in TI surface channels, but also reveals a unique spectroscopic information on the impurity bands that can be useful in bulk TI systems in general.

  1. Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Yung-Sheng Lin

    2016-11-01

    Full Text Available The present paper reports the preparation and wear behavior of mechanically alloyed Ti-based bulk metallic glass composites containing carbon nanotube (CNT particles. The differential scanning calorimeter results show that the thermal stability of the amorphous matrix is affected by the presence of CNT particles. Changes in glass transition temperature (Tg and crystallization temperature (Tx suggest that deviations in the chemical composition of the amorphous matrix occurred because of a partial dissolution of the CNT species into the amorphous phase. Although the hardness of CNT/Ti50Cu28Ni15Sn7 bulk metallic glass composites is increased with the addition of CNT particles, the wear resistance of such composites is not directly proportional to their hardness, and does not follow the standard wear law. A worn surface under a high applied load shows that the 12 vol. % CNT/Ti50Cu28Ni15Sn7 bulk metallic glass composite suffers severe wear compared with monolithic Ti50Cu28Ni15Sn7 bulk metallic glass.

  2. The Pr and Ca substitution in GdBa2Cu3O7-8

    International Nuclear Information System (INIS)

    Shakeri, H.; Akhavan, M.

    2002-01-01

    The granular Gd 1 -x-zPr x Ca z Ba 2 Cu 3 O 7 -8 (Gd Pr Ca-123) high-temperature cuprate samples with 0.0≤x≤0.3 and 0.0≤z≤0.35 are prepared by standard solid state reaction and characterized by XRD and SEM techniques. The BaCuO 2 and impurity phases are less than 1% in the samples having high levels of Pr and Ca concentrations. The electrical resistivity measurements show a nonlinear reduction in T c (x,z=etc) versus x. Moreover, the T c (z) curve with x=0 is nonlinear and a plateau appears at z≅0.05-0.015. For Pr-Ca-doped samples with a constant concentration of Pr, T c increases with the increase of Ca up to an optimum value of Ca doping and then in decreases. Based on these observations, we suggest that hole filling and hole localization the main effects of Pr ion substitution. The magnetic measurements indicate that the value of H C 1 is in the order of 10 m T. The magnetoresistance measurements have been measured and analyzed. The superconducting transition region is broadened by the application of magnetic field. The experimental data near the on sen of superconductivity are fitted with the Ambegakor and Halperin (A H) phase-slip model. We observe that the A H parameter, γ(H), depends not only on the temperature and the magnetic field, but also on the Pr and Ca ions concentrations. It is observed that the critical current density increases with Ca substitution and decreases with pr substitution in Gd-123 system. We suggest that the pr ion substitution probably enhances the weak link, but the Ca ion acts as flux pinning center in the Gd Pr Ca-123 system

  3. Proteasome inhibitors promote the sequestration of PrPSc into aggresomes within the cytosol of prion-infected CAD neuronal cells.

    Science.gov (United States)

    Dron, Michel; Dandoy-Dron, Françoise; Farooq Salamat, Muhammad Khalid; Laude, Hubert

    2009-08-01

    Dysfunction of the endoplasmic reticulum associated protein degradation/proteasome system is believed to contribute to the initiation or aggravation of neurodegenerative disorders associated with protein misfolding, and there is some evidence to suggest that proteasome dysfunctions might be implicated in prion disease. This study investigated the effect of proteasome inhibitors on the biogenesis of both the cellular (PrP(C)) and abnormal (PrP(Sc)) forms of prion protein in CAD neuronal cells, a newly introduced prion cell system. In uninfected cells, proteasome impairment altered the intracellular distribution of PrP(C), leading to a strong accumulation in the Golgi apparatus. Moreover, a detergent-insoluble and weakly protease-resistant PrP species of 26 kDa, termed PrP(26K), accumulated in the cells, whether they were prion-infected or not. However, no evidence was found that, in infected cells, this PrP(26K) species converts into the highly proteinase K-resistant PrP(Sc). In the infected cultures, proteasome inhibition caused an increased intracellular aggregation of PrP(Sc) that was deposited into large aggresomes. These findings strengthen the view that, in neuronal cells expressing wild-type PrP(C) from the natural promoter, proteasomal impairment may affect both the process of PrP(C) biosynthesis and the subcellular sites of PrP(Sc) accumulation, despite the fact that these two effects could essentially be disconnected.

  4. The effects of forward speed and depth of conservation tillage on soil bulk density

    Directory of Open Access Journals (Sweden)

    A Mahmoudi

    2015-09-01

    Full Text Available Introduction: In recent years, production techniques and equipment have been developed for conservation of tillage systems that have been adopted by many farmers. With proper management, overall yield averages for conventional and reduced tillage systems are nearly identical. Sometimes, field operations can be combined by connecting two or more implements. Combined operations reduce both fuel consumption, and time and labor requirements by eliminating at least one individual trip over the field. Light tillage, spraying, or fertilizing operations can be combined with either primary or secondary tillage or planting operations. Tillage helps seed growth and germination through providing appropriate conditions for soil to absorb sufficient temperature and humidity. Moreover, it helps easier development of root through reducing soil penetration resistance. Tillage is a time-consuming and expensive procedure. With the application of agricultural operations, we can save substantial amounts of fuel, time and energy consumption. Conservation tillage loosens the soil without turning, but by remaining the plant left overs, stems and roots. Bulk density reflects the soil’s ability to function for structural support, water and solute movement, and soil aeration. Bulk densities above thresholds indicate impaired function. Bulk density is also used to convert between weight and volume of soil. It is used to express soil physical, chemical and biological measurements on a volumetric basis for soil quality assessment and comparisons between management systems. This increases the validity of comparisons by removing the error associated with differences in soil density at the time of sampling. The aim of conservation tillage is to fix the soil structure. This investigation was carried out considering the advantages of conservation tillage and less scientific research works on imported conservation tillage devices and those which are made inside the country

  5. International Round-Robin Testing of Bulk Thermoelectrics

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hsin [ORNL; Porter, Wallace D [ORNL; Bottner, Harold [Fraunhofer-Institute, Freiburg, Germany; Konig, Jan [Fraunhofer-Institute, Freiburg, Germany; Chen, Lidong [Chinese Academy of Sciences; Bai, Shengqiang [Chinese Academy of Sciences; Tritt, Terry M. [Clemson University; Mayolett, Alex [Corning, Inc; Smith, Charlene [Corning, Inc; Harris, Fred [ZT-Plus; Sharp, Jeff [Marlow Industries, Inc; Lo, Jason [CANMET - Materials Technology Laboratory, Natural Resources of Canada; Keinke, Holger [University of Waterloo, Canada; Kiss, Laszlo I. [University of Quebec at Chicoutimi

    2011-11-01

    Two international round-robin studies were conducted on transport properties measurements of bulk thermoelectric materials. The study discovered current measurement problems. In order to get ZT of a material four separate transport measurements must be taken. The round-robin study showed that among the four properties Seebeck coefficient is the one can be measured consistently. Electrical resistivity has +4-9% scatter. Thermal diffusivity has similar +5-10% scatter. The reliability of the above three properties can be improved by standardizing test procedures and enforcing system calibrations. The worst problem was found in specific heat measurements using DSC. The probability of making measurement error is great due to the fact three separate runs must be taken to determine Cp and the baseline shift is always an issue for commercial DSC. It is suggest the Dulong Petit limit be always used as a guide line for Cp. Procedures have been developed to eliminate operator and system errors. The IEA-AMT annex is developing standard procedures for transport properties testing.

  6. Anomalous charge storage exponents of organic bulk heterojunction solar cells.

    Science.gov (United States)

    Nair, Pradeep; Dwivedi, Raaz; Kumar, Goutam; Dept of Electrical Engineering, IIT Bombay Team

    2013-03-01

    Organic bulk heterojunction (BHJ) devices are increasingly being researched for low cost solar energy conversion. The efficiency of such solar cells is dictated by various recombination processes involved. While it is well known that the ideality factor and hence the charge storage exponents of conventional PN junction diodes are influenced by the recombination processes, the same aspects are not so well understood for organic solar cells. While dark currents of such devices typically show an ideality factor of 1 (after correcting for shunt resistance effects, if any), surprisingly, a wide range of charge storage exponents for such devices are reported in literature alluding to apparent concentration dependence for bi-molecular recombination rates. In this manuscript we critically analyze the role of bi-molecular recombination processes on charge storage exponents of organic solar cells. Our results indicate that the charge storage exponents are fundamentally influenced by the electrostatics and recombination processes and can be correlated to the dark current ideality factors. We believe that our findings are novel, and advance the state-of the art understanding on various recombination processes that dictate the performance limits of organic solar cells. The authors would like to thank the Centre of Excellence in Nanoelectronics (CEN) and the National Centre for Photovoltaic Research and Education (NCPRE), IIT Bombay for computational and financial support

  7. Présentation Introduction

    Directory of Open Access Journals (Sweden)

    Jean-Paul Paccioni

    2011-12-01

    Full Text Available En faisant seulement référence au projet de mathesis universalis tel qu’on le trouve dans les Regulae de Descartes, en soulignant la promotion cartésienne de la certitude, on en arrive à masquer la complexité de l’histoire en jeu en voilant des choix philosophiques originaux. On voile aussi la polysémie qui se cache parfois dans les termes « certitude », « évidence », voire dans la simple référence à la « mathématique ». C’est pourquoi l’étude du concours de 1763 de l’Académie de Berlin prése...

  8. Quelle préposition ?

    CERN Document Server

    Grevisse, Maurice

    1996-01-01

    Pour bien parler ou bien écrire, il faut avant tout posséder un bon vocabulaire, puis savoir bien remuer les mots, leur faire exprimer quelque chose et agencer adroitement les propositions. Il faut aussi - et cela n'est pas négligeable - amener congrûment les divers compléments des noms, des adjectifs ou des verbes ; quand ces compléments sont de construction indirecte, c'est-à-dire quand ils doivent être introduits par une préposition, on hésite parfois sur la bonne manière de les accrocher. Ne pas négliger le bon choix! Cela ne crée pas le style, sans doute, mais peut, pour une part, témoigner de sa bonne qualité.

  9. Salicylic acid induction-deficient mutants of Arabidopsis express PR-2 and PR-5 and accumulate high levels of camalexin after pathogen inoculation.

    Science.gov (United States)

    Nawrath, C; Métraux, J P

    1999-08-01

    In Arabidopsis, systemic acquired resistance against pathogens has been associated with the accumulation of salicylic acid (SA) and the expression of the pathogenesis-related proteins PR-1, PR-2, and PR-5. We report here the isolation of two nonallelic mutants impaired in the pathway leading to SA biosynthesis. These SA induction-deficient (sid) mutants do not accumulate SA after pathogen inoculation and are more susceptible to both virulent and avirulent forms of Pseudomonas syringae and Peronospora parasitica. However, sid mutants are not as susceptible to these pathogens as are transgenic plants expressing the nahG gene encoding an SA hydroxylase that degrades SA to catechol. In contrast to NahG plants, only the expression of PR-1 is strongly reduced in sid mutants, whereas PR-2 and PR-5 are still expressed after pathogen attack. Furthermore, the accumulation of the phytoalexin camalexin is normal. These results indicate that SA-independent compensation pathways that do not operate in NahG plants are active in sid mutants. One of the mutants is allelic to eds5 (for enhanced disease susceptibility), whereas the other mutant has not been described previously.

  10. Locality, bulk equations of motion and the conformal bootstrap

    Energy Technology Data Exchange (ETDEWEB)

    Kabat, Daniel [Department of Physics and Astronomy, Lehman College, City University of New York,250 Bedford Park Blvd. W, Bronx NY 10468 (United States); Lifschytz, Gilad [Department of Mathematics, Faculty of Natural Science, University of Haifa,199 Aba Khoushy Ave., Haifa 31905 (Israel)

    2016-10-18

    We develop an approach to construct local bulk operators in a CFT to order 1/N{sup 2}. Since 4-point functions are not fixed by conformal invariance we use the OPE to categorize possible forms for a bulk operator. Using previous results on 3-point functions we construct a local bulk operator in each OPE channel. We then impose the condition that the bulk operators constructed in different channels agree, and hence give rise to a well-defined bulk operator. We refer to this condition as the “bulk bootstrap.” We argue and explicitly show in some examples that the bulk bootstrap leads to some of the same results as the regular conformal bootstrap. In fact the bulk bootstrap provides an easier way to determine some CFT data, since it does not require knowing the form of the conformal blocks. This analysis clarifies previous results on the relation between bulk locality and the bootstrap for theories with a 1/N expansion, and it identifies a simple and direct way in which OPE coefficients and anomalous dimensions determine the bulk equations of motion to order 1/N{sup 2}.

  11. RESONANCEI--A-pr-il

    Indian Academy of Sciences (India)

    Starting from August 2004, Resonance is publishing in the Classroom section, a series of short articles, 'Earthquake Tips', related to earthquakes, their effects on civil structures, and design and construction of earthquake resistant buildings. The concepts are clearly explained with sketches and analogies. We hope the ...

  12. Parimad suhtekorraldusteod konkursil Baltic PR Awards

    Index Scriptorium Estoniae

    2012-01-01

    Balti riikide suhtekorraldusliidud koostöös Rahvusvahelise Avalike Suhete Assotsiatsiooniga (IPRA) korraldavad 2001. aastast iga aasta kommunikatsioonijuhtimisalast auhinnakonkurssi Baltic PR Awards

  13. Mouse-adapted ovine scrapie prion strains are characterized by different conformers of PrPSc.

    Science.gov (United States)

    Thackray, Alana M; Hopkins, Lee; Klein, Michael A; Bujdoso, Raymond

    2007-11-01

    The agent responsible for prion disease may exist in different forms, commonly referred to as strains, with each carrying the specific information that determines its own distinct biological properties, such as incubation period and lesion profile. Biological strain typing of ovine scrapie isolates by serial passage in conventional mice has shown some diversity in ovine prion strains. However, this biological diversity remains poorly supported by biochemical prion strain typing. The protein-only hypothesis predicts that variation between different prion strains in the same host is manifest in different conformations adopted by PrPSc. Here we have investigated the molecular properties of PrPSc associated with two principal Prnp(a) mouse-adapted ovine scrapie strains, namely, RML and ME7, in order to establish biochemical prion strain typing strategies that may subsequently be used to discriminate field cases of mouse-passaged ovine scrapie isolates. We used a conformation-dependent immunoassay and a conformational stability assay, together with Western blot analysis, to demonstrate that RML and ME7 PrPSc proteins show distinct biochemical and physicochemical properties. Although RML and ME7 PrPSc proteins showed similar resistance to proteolytic digestion, they differed in their glycoform profiles and levels of proteinase K (PK)-sensitive and PK-resistant isoforms. In addition, the PK-resistant core (PrP27-30) of ME7 was conformationally more stable following exposure to guanidine hydrochloride or Sarkosyl than was RML PrP27-30. Our data show that mouse-adapted ovine scrapie strains can be discriminated by their distinct conformers of PrPSc, which provides a basis to investigate their diversity at the molecular level.

  14. Thermodynamic assessment of the Pr-Zn binary system

    International Nuclear Information System (INIS)

    Huang, X.M.; Liu, L.B.; Zhang, L.G.; Jia, B.R.; Jin, Z.P.; Zheng, F.

    2008-01-01

    On the basis of available experimental data of phase diagram and thermodynamic properties, the Pr-Zn binary system has been optimized using the CALPHAD approach. The phases, including liquid and bcc A 2(βPr) were treated as substitutional solutions, while the intermetallic compounds, including PrZn, PrZn 2 , PrZn 3 , Pr 3 Zn 11 , Pr 13 Zn 58 , Pr 3 Zn 22 , Pr 2 Zn 17 and PrZn 11 were modeled as stoichiometric compounds. As the result of optimization, a set of self-consistent thermodynamic parameters has been obtained, which can be used to reproduce the reported experimental data

  15. Pre-clinical activity of PR-104 as monotherapy and in combination with sorafenib in hepatocellular carcinoma.

    Science.gov (United States)

    Abbattista, Maria R; Jamieson, Stephen M F; Gu, Yongchuan; Nickel, Jennifer E; Pullen, Susan M; Patterson, Adam V; Wilson, William R; Guise, Christopher P

    2015-01-01

    PR-104 is a clinical stage bioreductive prodrug that is converted in vivo to its cognate alcohol, PR-104A. This dinitrobenzamide mustard is reduced to activated DNA cross-linking metabolites (hydroxylamine PR-104H and amine PR-104M) under hypoxia by one-electron reductases and independently of hypoxia by the 2-electron reductase aldo-keto reductase 1C3 (AKR1C3). High expression of AKR1C3, along with extensive hypoxia, suggested the potential of PR-104 for treatment of hepatocellular carcinoma (HCC). However, a phase IB trial with sorafenib demonstrated significant toxicity that was ascribed in part to reduced PR-104A clearance, likely reflecting compromised glucuronidation in patients with advanced HCC. Here, we evaluate the activity of PR-104 in HCC xenografts (HepG2, PLC/PRF/5, SNU-398, Hep3B) in mice, which do not significantly glucuronidate PR-104A. Cell line differences in sensitivity to PR-104A in vitro under aerobic conditions could be accounted for by differences in both expression of AKR1C3 (high in HepG2 and PLC/PRF/5) and sensitivity to the major active metabolite PR-104H, to which PLC/PRF/5 was relatively resistant, while hypoxic selectivity of PR-104A cytotoxicity and reductive metabolism was greatest in the low-AKR1C3 SNU-398 and Hep3B lines. Expression of AKR1C3 in HepG2 and PLC/PRF/5 xenografts was in the range seen in 21 human HCC specimens. PR-104 monotherapy elicited significant reductions in growth of Hep3B and HepG2 xenografts, and the combination with sorafenib was significantly active in all 4 xenograft models. The results suggest that better-tolerated analogs of PR-104, without a glucuronidation liability, may have the potential to exploit AKR1C3 and/or hypoxia in HCC in humans.

  16. Acibenzolar-S-methyl induces lettuce resistance against ...

    African Journals Online (AJOL)

    ... contributing to the enhancement of plant resistance. The effect was comparable with copper treatment. As a marker of resistance, PR protein activity chitinase showed remarkable increase, depending on decreasing bacterial growth in planta. Key words: Acibenzolar-S-methyl, induced resistance, Xanthomonas campestris ...

  17. Nickel silicide thin films as masking and structural layers for silicon bulk micro-machining by potassium hydroxide wet etching

    International Nuclear Information System (INIS)

    Bhaskaran, M; Sriram, S; Sim, L W

    2008-01-01

    This paper studies the feasibility of using titanium and nickel silicide thin films as mask materials for silicon bulk micro-machining. Thin films of nickel silicide were found to be more resistant to wet etching in potassium hydroxide. The use of nickel silicide as a structural material, by fabricating micro-beams of varying dimensions, is demonstrated. The micro-structures were realized using these thin films with wet etching using potassium hydroxide solution on (1 0 0) and (1 1 0) silicon substrates. These results show that nickel silicide is a suitable alternative to silicon nitride for silicon bulk micro-machining

  18. A CFT perspective on gravitational dressing and bulk locality

    Energy Technology Data Exchange (ETDEWEB)

    Lewkowycz, Aitor; Turiaci, Gustavo J. [Physics Department, Princeton University,Princeton, NJ 08544 (United States); Verlinde, Herman [Physics Department, Princeton University,Princeton, NJ 08544 (United States); Princeton Center for Theoretical Science, Princeton University,Princeton, NJ 08544 (United States)

    2017-01-02

    We revisit the construction of local bulk operators in AdS/CFT with special focus on gravitational dressing and its consequences for bulk locality. Specializing to 2+1-dimensions, we investigate these issues via the proposed identification between bulk operators and cross-cap boundary states. We obtain explicit expressions for correlation functions of bulk fields with boundary stress tensor insertions, and find that they are free of non-local branch cuts but do have non-local poles. We recover the HKLL recipe for restoring bulk locality for interacting fields as the outcome of a natural CFT crossing condition. We show that, in a suitable gauge, the cross-cap states solve the bulk wave equation for general background geometries, and satisfy a conformal Ward identity analogous to a soft graviton theorem. Virasoro symmetry, the large N conformal bootstrap and the uniformization theorem all play a key role in our derivations.

  19. Bulk temperature measurement in thermally striped pipe flows

    International Nuclear Information System (INIS)

    Lemure, N.; Olvera, J.R.; Ruggles, A.E.

    1995-12-01

    The hot leg flows in some Pressurized Water Reactor (PWR) designs have a temperature distribution across the pipe cross-section. This condition is often referred to as a thermally striped flow. Here, the bulk temperature measurement of pipe flows with thermal striping is explored. An experiment is conducted to examine the feasibility of using temperature measurements on the external surface of the pipe to estimate the bulk temperature of the flow. Simple mixing models are used to characterize the development of the temperature profile in the flow. Simple averaging techniques and Backward Propagating Neural Net are used to predict bulk temperature from the external temperature measurements. Accurate bulk temperatures can be predicted. However, some temperature distributions in the flow effectively mask the bulk temperature from the wall and cause significant error in the bulk temperature predicted using this technique

  20. Mixed-state flux dynamics in bulk MgB2

    International Nuclear Information System (INIS)

    Li Shi; Taylor, B.J.; Frederick, N.A.; Maple, M.B.; Nesterenko, V.F.; Indrakanti, S.S.

    2002-01-01

    Electric field vs. current density (E-J) isotherms in the mixed-state of a bulk sample of the high-temperature superconductor MgB 2 (T c =38.5 K), synthesized under 200 MPa pressure by hot isostatic pressing (HIPing), have been measured and analyzed in terms of the critical scaling model. Magnetization data reveal distinctly different critical current density (J c ) behaviors in high and low magnetic field critical scaling regions. E-J isotherm sets at fields ranging from 2 to 90 kOe conform to the vortex-glass (VG) scaling anzatz. Scaling analysis, resistivity data and J c data suggest that a Bragg-glass state may exist for H c2 (T), the VG transition line H g (T), and the magnetic irreversibility line H irr (T) has been established for bulk MgB 2

  1. Bulk glass formation and crystallization in zirconium based bulk metallic glass forming alloys

    International Nuclear Information System (INIS)

    Savalia, R.T.; Neogy, S.; Dey, G.K.; Banerjee, S.

    2002-01-01

    The microstructures of Zr based metallic glasses produced in bulk form have been described in the as-cast condition and after crystallization. Various microscopic techniques have been used to characterize the microstructures. The microstructure in the as-cast condition was found to contain isolated crystals and crystalline aggregates embedded in the amorphous matrix. Quenched-in nuclei of crystalline phases were found to be present in fully amorphous regions. These glasses after crystallization gave rise to nanocrystalline solids. (author)

  2. Eco Issues in Bulk Materials Handling Technologies in Ports

    OpenAIRE

    Nenad Zrnic; Milos Dordevic; Branislav Dragovic; Srdan Bosnjak

    2011-01-01

    This paper deals with eco issues in bulk materials handling in ports. Solid, free-flowing materials are said to be in bulk. Bulk materials han-dling is very difficult, because it incorporates all the features of liquids, gasses and mass solids. Energy efficiency, dust emissions in nearby en-vironment, dust explosions, jamming, noise, handling of hazardous ma-terials and protection of materials from contamination are issues that will be considered in this paper. Here are also presented possibl...

  3. Localization of bulk form fields on dilatonic domain walls

    International Nuclear Information System (INIS)

    Youm, Donam

    2001-06-01

    We study the localization properties of bulk form potentials on dilatonic domain walls. We find that bulk form potentials of any ranks can be localized as form potentials of the same ranks or one lower ranks, for any values of the dilaton coupling parameter. For large enough values of the dilaton coupling parameter, bulk form potentials of any ranks can be localized as form potentials of both the same ranks and one lower ranks. (author)

  4. PrP Conformational Transitions Alter Species Preference of a PrP-specific antibody

    NARCIS (Netherlands)

    Zou, W.Q.; Langeveld, J.P.M.; Xiao, X.; Chen, S.; McGeer, P.L.; Yuan, J.; Payne, M.C.; Kang, H.E.; McGeehan, J.M.; Sy, M.S.; Greenspan, N.S.; Kaplan, D.; Wang, G.X.; Parchi, P.; Hoover, E.A.; Kneale, G.; Telling, G.; Surewicz, W.; Kong, Q.; Guo, J.

    2010-01-01

    The epitope of the 3F4 antibody most commonly used in human prion disease diagnosis is believed to consist of residues Met-Lys-His-Met (MKHM) corresponding to human PrP-(109–112). This assumption is based mainly on the observation that 3F4 reacts with human and hamster PrP but not with PrP from

  5. Preliminary study of superconducting bulk magnets for Maglev

    Science.gov (United States)

    Fujimoto, Hiroyuki; Kamijo, Hiroki

    Recent development shows that melt-processed YBaCuO (Y123) or Rare Earth (RE)123 superconductors have a high Jc at 77 K and high magnetic field, leading to high field application as a superconducting quasi-permanent bulk magnet with the liquid nitrogen refrigeration. One of the promising applications is a superconducting magnet for the magnetically levitated (Maglev) train. We discuss a superconducting bulk magnet for the Maglev train in the aspect of a preliminary design of the bulk magnet and also processing for (L)REBaCuO bulk superconductors and their characteristic superconducting properties.

  6. Avaliação da resistência à tração de artifícios ortodônticos - braquete, botão e tela - colados em pré-molares com resina autopolimerizável. estudo "in vitro" Evaluation of the resistance to traction of orthodontic devices - bracket, bouton and frame - bonded in premolar with autopolimerizable resin. "in vitro" study

    Directory of Open Access Journals (Sweden)

    Walter Leal de Moura

    2004-06-01

    Full Text Available Retenção dentária é a condição fisiopatológica em que o dente, uma vez chegado o seu momento fisiológico de erupção, apresenta algum impedimento para realizá-lo. O tratamento, com envolvimento cirúrgico-ortodôntico, visa deslocar o elemento dental para a correta posição na arcada dentária, sem causar danos aos elementos dentais adjacentes, restabelecendo a estética e a função. A colagem direta de botões e braquetes ortodônticos para tração de dentes inclusos transformou-se na técnica preferida, pois exige menor extensão cirúrgica e remoção de tecido para acesso à coroa dental. A pesquisa objetivou analisar a intensidade da força aplicada ao conjunto dente/artifício/fio de amarrilho, pelo tracionamento, e observar o local do rompimento. Utilizaram-se 45 pré-molares, conservados em soro fisiológico 0,9%, que foram divididos em 3 grupos (15 com braquetes, 15 com botões e 15 com telas. Os dentes foram fixados em canos de PVC preenchidos com resina acrílica e os acessórios fixados ao dente com resina autopolimerizável. Após a colagem dos acessórios ortodônticos, os dentes voltaram a ser conservados em soro fisiológico e o teste realizado após 72 horas, com a utilização de um sensor de força e um programa de computador (Logger Pro. Com os resultados, observou-se que o braquete resistiu a uma força média de 36,0N, sendo a junção fio/braquete o local menos resistente; o botão resistiu a uma força média de 41,2N, a junção fio/botão ortodôntico foi o local menos resistente e a tela resistiu a uma força média de 28,8N, sendo a junção dente/tela o local menos resistente.Restrained is the tooth which, reached its physiological moment of eruption, shows some obstruction to accomplish it. The treatment, with orthodontic-surgical involvement, type drives at to dislocate the dental element for right position in the dental arch, without to cause damages for adjacent dental element, re-establishing the

  7. Pró-bicho Pelotas

    Directory of Open Access Journals (Sweden)

    Juliana Corrêa Hermes Angeli

    2014-03-01

    Full Text Available http://dx.doi.org/10.5007/1807-0221.2013v10n16p23 Desenvolvido desde 2012, o Projeto Pró-Bicho Pelotas visa auxiliar protetores voluntários de animais e a ONG SOS Pelotas (organização que atua no resgate e no tratamento de animais abandonados na obtenção de imagens fotográficas com qualidade dos animais resgatados e que se encontram disponíveis para adoção responsável. Através do e-maildo projeto, são agendadas as sessões fotográficas dos animais. As fotografias são obtidas com equipamento profissional e em um fundo infinito portátil, construído pelos discentes. Dessa forma, a obtenção de imagens pode ser realizada no próprio Centro de Artes ou no local onde os animais se encontram. Após a edição e o tratamento, as imagens são veiculadas em álbuns na página do projeto na rede social Facebook. Juntamente com os álbuns, são divulgados os contatos do protetor que está cuidando dos animais até a adoção. O agendamento das sessões, a obtenção de imagens, seu tratamento e sua divulgação são realizados por discentes do Centro de Artes da UFPel que cursaram as disciplinas de Introdução à Fotografia e Fotografia nos cursos de Artes Visuais (Bacharelado e Licenciatura, Design Gráfico e Design Digital. Além de divulgar os álbuns do projeto, na página também são divulgados animais que estão para adoção e cujo protetor encaminhou as fotografias e solicitações de divulgação de animais desaparecidos ou encontrados. As publicações na página atingem semanalmente cerca de 10 mil usuários. Em 2012, dos 164 animais fotografados, entre cães e gatos, mais de 65% foi adotado.

  8. Strong Bulk-Edge Coupling in the Compressible Half-Filled Quantum Hall State

    International Nuclear Information System (INIS)

    Milovanovic, M.V.; Shimshoni, E.

    1999-01-01

    We studied analytically static correlators in the compressible half-filled quantum Hall state, which characterize the nature of charged excitations in the bulk and on the edge of the system. We employ a modified version of the plasma analogy - namely, a mapping to a classical two-dimensional system of interacting particles - similarly to what has been done in studies of the incompressible (Laughlin) states. However, the 'fake plasma' corresponding to the half-filled state is found to have anomalously weak screening properties. As a consequence, the correlations along the edge do not decay algebraically as in the incompressible case, thus indicating the breakdown of Wen's edge theory. On the other hand, the bulk correlator (which parallels the Girvin-MacDonald algebraic off-diagonal long range order) decays algebraically in a similar way as in the incompressible states, signifying the presence of some kind of bosonic order even in the compressible state. The above results suggest that due to the strong coupling between charged modes on the edge and the neutral Fermions (dipoles) in the bulk, the (attractive) correlation hole is not well defined on the edge. Hence, the system there can be modeled as a free Fermi gas of electrons (with an appropriate boundary condition). A possible experimental indication of a strong bulk-edge coupling at half-filling has been indeed observed in non-local resistance measurements [1]. We also suggest, that while our results contradict the validity of an effective one-dimensional description of the edge excitations on the static level, the dynamics may decouple the edge and bulk so as to recover the Laughlin-like behavior apparent in the experiment of Grayson et al

  9. A refined method for molecular typing reveals that co-occurrence of PrPSc types in Creutzfeldt-Jakob disease is not the rule

    NARCIS (Netherlands)

    Notari, S.; Capellari, S.; Langeveld, J.P.M.; Giese, A.; Strammiello, R.; Gambetti, P.; Kretzschmar, H.A.; Parchi, P.

    2007-01-01

    Molecular typing in Creutzfeldt¿Jakob disease (CJD) relies on the detection of distinct protease-resistant prion protein (PrPSc) core fragments, which differ in molecular mass or glycoform ratio. However, the definition and correct identification of CJD cases with a co-occurrence of PrPSc types

  10. Recent developments of film bulk acoustic resonators

    Science.gov (United States)

    Gao, Junning; Liu, Guorong; Li, Jie; Li, Guoqiang

    2016-06-01

    Film bulk acoustic wave resonator (FBAR) experienced skyrocketing development in the past 15 years, owing to the explosive development of mobile communication. It stands out in acoustic filters mainly because of high quality factor, which enables low insertion loss and sharp roll off. Except for the massive application in wireless communication, FBARs are also promising sensors because of the high sensitivity and readily integration ability to miniaturize circuits. On the ground of summarizing FBAR’s application in wireless communication as filters and in sensors including electronic nose, bio field, and pressure sensing, this paper review the main challenges of each application faced. The number of filters installed in the mobile phone has being grown explosively, which leads to overcrowded bands and put harsh requirements on component size and power consumption control for each unit. Data flow and rate are becoming increasingly demanding as well. This paper discusses three promising technical strategies addressing these issues. Among which coupled resonator filter is given intense attention because it is able to vigorously reduce the filter size by stacking two or more resonators together, and it is a great technique to increase data flow and rate. Temperature compensation methods are discussed considering their vital influence on frequency stability. Finally, materials improvement and novel materials exploration for band width modulation, tunable band acquisition, and quality factor improvement are discussed. The authors appeal attention of the academic society to bring AlN epitaxial thin film into the FBAR fabrication and have proposed a configuration to implement this idea.

  11. Thermodynamic properties of bulk and confined water

    Energy Technology Data Exchange (ETDEWEB)

    Mallamace, Francesco, E-mail: francesco.mallamace@unime.it [Dipartimento di Fisica e Scienza della Terra Università di Messina and CNISM, I-98168 Messina (Italy); Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Center for Polymer Studies and Department of Physics, Boston University, Boston, Massachusetts 02215 (United States); Corsaro, Carmelo [Dipartimento di Fisica e Scienza della Terra Università di Messina and CNISM, I-98168 Messina (Italy); Mallamace, Domenico [Dipartimento di Scienze dell' Ambiente, della Sicurezza, del Territorio, degli Alimenti e della Salute, Università di Messina, I-98166 Messina (Italy); Vasi, Sebastiano; Vasi, Cirino [IPCF-CNR, I-98166 Messina (Italy); Stanley, H. Eugene [Center for Polymer Studies and Department of Physics, Boston University, Boston, Massachusetts 02215 (United States)

    2014-11-14

    The thermodynamic response functions of water display anomalous behaviors. We study these anomalous behaviors in bulk and confined water. We use nuclear magnetic resonance (NMR) to examine the configurational specific heat and the transport parameters in both the thermal stable and the metastable supercooled phases. The data we obtain suggest that there is a behavior common to both phases: that the dynamics of water exhibit two singular temperatures belonging to the supercooled and the stable phase, respectively. One is the dynamic fragile-to-strong crossover temperature (T{sub L} ≃ 225 K). The second, T{sup *} ∼ 315 ± 5 K, is a special locus of the isothermal compressibility K{sub T}(T, P) and the thermal expansion coefficient α{sub P}(T, P) in the P–T plane. In the case of water confined inside a protein, we observe that these two temperatures mark, respectively, the onset of protein flexibility from its low temperature glass state (T{sub L}) and the onset of the unfolding process (T{sup *})

  12. Magnetization response in bulk nanostructured magnets

    International Nuclear Information System (INIS)

    Loeffler, Joerg F.; Braun, Hans-Benjamin

    2007-01-01

    Small-angle neutron scattering (SANS) experiments on nanostructured Fe reveal grain-size-dependent magnetic correlations with a minimal correlation length for grain sizes on the order of the bulk domain-wall width. To investigate the evolution of these correlations during the magnetization process, we performed SANS experiments in external fields of various strengths. In intermediate fields, we find anisotropic scattering profiles with an unusual intensity enhancement for scattering vectors parallel to the field direction. These observations are compared with a modeled granular microstructure containing magnetic domains of arbitrary size and orientation, demonstrating that magnetic domains extend over several grains and have a magnetization that is tilted considerably away from the external field direction. Since the domain size does not change significantly with the magnitude of the external field, we conclude that the magnetization process does not proceed via domain-wall motion. Rather, our SANS data suggests that the magnetization process proceeds by simultaneous reversal of a few adjacent domains, presumably in the form of small avalanches. The latter supposition is supported by theoretical arguments showing the existence of marginally stable domains within the random-anisotropy model

  13. Photoelectron spectroscopy bulk and surface electronic structures

    CERN Document Server

    Suga, Shigemasa

    2014-01-01

    Photoelectron spectroscopy is now becoming more and more required to investigate electronic structures of various solid materials in the bulk, on surfaces as well as at buried interfaces. The energy resolution was much improved in the last decade down to 1 meV in the low photon energy region. Now this technique is available from a few eV up to 10 keV by use of lasers, electron cyclotron resonance lamps in addition to synchrotron radiation and X-ray tubes. High resolution angle resolved photoelectron spectroscopy (ARPES) is now widely applied to band mapping of materials. It attracts a wide attention from both fundamental science and material engineering. Studies of the dynamics of excited states are feasible by time of flight spectroscopy with fully utilizing the pulse structures of synchrotron radiation as well as lasers including the free electron lasers (FEL). Spin resolved studies also made dramatic progress by using higher efficiency spin detectors and two dimensional spin detectors. Polarization depend...

  14. Calcium Isotopic Composition of Bulk Silicate Earth

    Science.gov (United States)

    Kang, J.; Ionov, D. A.; Liu, F.; Zhang, C.; Zhang, Z.; Huang, F.

    2016-12-01

    Ca isotopes are used to study the accretion history of the Earth and terrestrial planets, but, Ca isotopic composition of the Bulk Silicate Earth (BSE) remains poorly constrained [1]. To better understand the Ca isotopic composition of BSE, we analyzed 22 well studied peridotite xenoliths from Tariat (Mongolia), Vitim (southern Siberia) and Udachnaya (Siberian Craton). These samples include both fertile and highly depleted garnet and spinel peridotites that show no or only minor post-melting metasomatism or alteration. Ca isotope measurements were done on a Triton-TIMS using double spike method at the Guangzhou Institute of Geochemistry, CAS. The data are reported as δ44/40Ca (relative to NIST SRM 915a). Results for geostandards are consistent with those from other laboratories. 2 standard deviations of SRM 915a analyses are 0.13‰ (n=48). δ44/40Ca of both and fertile and refractory peridotites range from 0.79 to 1.07‰ producing an average of 0.93±0.12‰ (2SD). This value defines the Ca isotopic composition of the BSE, which is consistent with the average δ44/40Ca of oceanic basalts ( 0.90‰)[2,3]. [1] Huang et al (2010) EPSL 292; [2] Valdes et al (2014) EPSL 394; [3]DePaolo (2004) RMG 55.

  15. Low temperature diffusion process using rare earth-Cu eutectic alloys for hot-deformed Nd-Fe-B bulk magnets

    Energy Technology Data Exchange (ETDEWEB)

    Akiya, T., E-mail: akiya.takahiro@nims.go.jp; Sepehri-Amin, H.; Ohkubo, T. [Elements Strategy Initiative Center for Magnetic Materials, National Institute for Materials Science, Tsukuba 305-0047 (Japan); Liu, J.; Hono, K. [Elements Strategy Initiative Center for Magnetic Materials, National Institute for Materials Science, Tsukuba 305-0047 (Japan); Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8577 (Japan); Hioki, K.; Hattori, A. [Daido Steel Co., LTD, Nagoya 457-8545 (Japan)

    2014-05-07

    The low temperature grain boundary diffusion process using RE{sub 70}Cu{sub 30} (RE = Pr, Nd) eutectic alloy powders was applied to sintered and hot-deformed Nd-Fe-B bulk magnets. Although only marginal coercivity increase was observed in sintered magnets, a substantial enhancement in coercivity was observed when the process was applied to hot-deformed anisotropic bulk magnets. Using Pr{sub 70}Cu{sub 30} eutectic alloy as a diffusion source, the coercivity was enhanced from 1.65 T to 2.56 T. The hot-deformed sample expanded along c-axis direction only after the diffusion process as RE rich intergranular layers parallel to the broad surface of the Nd{sub 2}Fe{sub 14}B are thickened in the c-axis direction.

  16. Attitude towards antiretroviral Pre-Exposure Prophylaxis (PrEP) prescription among HIV specialists.

    Science.gov (United States)

    Puro, Vincenzo; Palummieri, Antonio; De Carli, Gabriella; Piselli, Pierluca; Ippolito, Giuseppe

    2013-05-14

    To investigate perceptions and attitude to prescribe Pre-Exposure Prophylaxis (PrEP) among HIV specialists. A questionnaire developed through a Focus Group and literature review was administered to a convenience sample of HIV specialists during educational courses in two Regions and an online survey in February-May 2012. Participants were classified as having a positive or negative attitude according to their willingness to prescribe PrEP. Demographic and working information, experience with HIV-infected patients, information and provision of antiretrovirals to uninfected persons, self-reported knowledge, perceptions and concerns regarding PrEP were assessed. The association between a different attitude towards PrEP prescription and selected characteristics was assessed through univariate and multivariate regression analysis. Of 311 specialists, 70% would prescribe PrEP, mainly to serodiscordant partners (64%) but also to people at ongoing, high risk of HIV infection (56%); 66% advocated public support of costs. A negative attitude towards PrEP was significantly associated with lack of provision of information on, and prescription of, antiretroviral post-exposure prophylaxis; specialists with a negative attitude believed behavioural interventions to be more effective than PrEP and were more concerned about toxicity. Overall, 90% of specialists disagreed regarding a lack of time for engaging in prevention counselling and PrEP monitoring; 79% would welcome formal guidelines, while those with a negative attitude did not consider this advisable. Although conflicting attitudes appear evident, most specialists seem to be willing, with guidance from normative bodies, to promote PrEP within multiple prevention strategies among vulnerable populations. More scientific evidence regarding effectiveness could overcome resistance.

  17. Tunable resistance coatings

    Science.gov (United States)

    Elam, Jeffrey W.; Mane, Anil U.

    2015-08-11

    A method and article of manufacture of intermixed tunable resistance composite materials containing at least one of W:Al.sub.2O.sub.3, Mo:Al.sub.2O.sub.3 or M:Al.sub.2O.sub.3 where M is a conducting compound containing either W or Mo. A conducting material and an insulating material are deposited by such methods as ALD or CVD to construct composites with intermixed materials which do not have structure or properties like their bulk counterparts.

  18. Resistance-resistant antibiotics.

    Science.gov (United States)

    Oldfield, Eric; Feng, Xinxin

    2014-12-01

    New antibiotics are needed because drug resistance is increasing while the introduction of new antibiotics is decreasing. We discuss here six possible approaches to develop 'resistance-resistant' antibiotics. First, multitarget inhibitors in which a single compound inhibits more than one target may be easier to develop than conventional combination therapies with two new drugs. Second, inhibiting multiple targets in the same metabolic pathway is expected to be an effective strategy owing to synergy. Third, discovering multiple-target inhibitors should be possible by using sequential virtual screening. Fourth, repurposing existing drugs can lead to combinations of multitarget therapeutics. Fifth, targets need not be proteins. Sixth, inhibiting virulence factor formation and boosting innate immunity may also lead to decreased susceptibility to resistance. Although it is not possible to eliminate resistance, the approaches reviewed here offer several possibilities for reducing the effects of mutations and, in some cases, suggest that sensitivity to existing antibiotics may be restored in otherwise drug-resistant organisms. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Comparing the physical properties of Pr/Gd and Pr/Ce substitutions in Ru(Gd1.5Ce0.5)Sr2Cu2O10- δ

    Science.gov (United States)

    Khajehnezhad, A.; Nikseresht, N.; Hadipour, H.; Akhavan, M.

    2008-06-01

    We have compared the electrical and magnetic properties of Ru(Gd1.5- x Pr x )Ce0.5Sr2Cu2O10- δ (Pr/Gd samples) with x = 0.0, 0.01, 0.03, 0.033, 0.035, 0.04, 0.05, 0.06, 0.1 and RuGd1.5(Ce0.5- x Pr x ) Sr2 Cu2O10- δ (Pr/Ce samples) with x = 0.0, 0.01, 0.03, 0.05, 0.08, 0.1, 0.15, 0.2 prepared by the standard solid-state reaction technique. We obtained the XRD patterns for different samples with various x. The lattice parameters versus x for different substitutions have been obtained from Rietveld analysis. To determine how the magnetic and superconducting properties of these layered cuprate systems can be affected by Pr substitution, the resistivity, and magnetoresistivity, with H ext varying from 0.0 to 15 kOe, have been measured at various temperatures. Superconducting transition temperature T c and magnetic transition T irr , have been obtained through resistivity and ac susceptibility measurements. The T c suppression due to Pr/Gd and Pr/Ce substitutions show competition between pair breaking by magnetic impurities, hole doping due to different valances of ions, difference in ionic radii, and oxygen stoichiometry. Pr/Gd substitution suppresses superconductivity more rapidly than for Pr/Ce, showing that the effect of hole doping and magnetic impurity pair breaking is stronger than the difference in ionic radii. In Pr/Gd substitution, the small difference between the ionic radii of Pr3+,4+ and Gd3+, and absorption of more oxygen due to the higher valence of Pr with respect to Gd, decreases the mean Ru-Ru distance, and as a result, the magnetic exchange interaction becomes stronger with the increase of x. However, Pr/Ce substitution has the opposite effect. The magnetic parameters such as H c , obtained through magnetization measurements versus applied magnetic field isotherm at 77 K and room temperatures, become stronger with x in Pr/Gd and weaker with x in Pr/Ce substitution.

  20. Molecular markers associated with a new source of resistance to the ...

    African Journals Online (AJOL)

    In this study, molecular markers associated with resistance to CMD in a resistant landrace were identified, using F1 progenies derived from a cross between the CMD resistant landrace TME7 and the susceptible line TMS30555, as a first step in marker assisted breeding for CMD resistance. Bulk segregant analysis (BSA) on ...

  1. Bulk Vitrification Castable Refractory Block Protection Study

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Beck, Andrew E.; Brouns, Thomas M.; Caldwell, Dustin D.; Elliott, Michael L.; Matyas, Josef; Minister, Kevin BC; Schweiger, Michael J.; Strachan, Denis M.; Tinsley, Bronnie P.; Hollenberg, Glenn W.

    2005-05-01

    Bulk vitrification (BV) was selected for a pilot-scale test and demonstration facility for supplemental treatment to accelerate the cleanup of low-activity waste (LAW) at the Hanford U.S. DOE Site. During engineering-scale (ES) tests, a small fraction of radioactive Tc (and Re, its nonradioactive surrogate) were transferred out of the LAW glass feed and molten LAW glass, and deposited on the surface and within the pores of the castable refractory block (CRB). Laboratory experiments were undertaken to understand the mechanisms of the transport Tc/Re into the CRB during vitrification and to evaluate various means of CRB protection against the deposition of leachable Tc/Re. The tests used Re as a chemical surrogate for Tc. The tests with the baseline CRB showed that the molten LAW penetrates into CRB pores before it converts to glass, leaving deposits of sulfates and chlorides when the nitrate components decompose. Na2O from the LAW reacts with the CRB to create a durable glass phase that may contain Tc/Re. Limited data from a single CRB sample taken from an ES experiment indicate that, while a fraction of Tc/Re is present in the CRB in a readily leachable form, most of the Tc/Re deposited in the refractory is retained in the form of a durable glass phase. In addition, the molten salts from the LAW, mainly sulfates, chlorides, and nitrates, begin to evaporate from BV feeds at temperatures below 800 C and condense on solid surfaces at temperatures below 530 C. Three approaches aimed at reducing or preventing the deposition of soluble Tc/Re within the CRB were proposed: metal lining, sealing the CRB surface with a glaze, and lining the CRB with ceramic tiles. Metal liners were deemed unsuitable because evaluations showed that they can cause unacceptable distortions of the electric field in the BV system. Sodium silicate and a low-alkali borosilicate glaze were selected for testing. The glazes slowed down molten salt condensate penetration, but did little to reduce the

  2. Silicon bulk micromachined hybrid dimensional artifact.

    Energy Technology Data Exchange (ETDEWEB)

    Claudet, Andre A.; Tran, Hy D.; Bauer, Todd Marks; Shilling, Katherine Meghan; Oliver, Andrew David

    2010-03-01

    A mesoscale dimensional artifact based on silicon bulk micromachining fabrication has been developed and manufactured with the intention of evaluating the artifact both on a high precision coordinate measuring machine (CMM) and video-probe based measuring systems. This hybrid artifact has features that can be located by both a touch probe and a video probe system with a k=2 uncertainty of 0.4 {micro}m, more than twice as good as a glass reference artifact. We also present evidence that this uncertainty could be lowered to as little as 50 nm (k=2). While video-probe based systems are commonly used to inspect mesoscale mechanical components, a video-probe system's certified accuracy is generally much worse than its repeatability. To solve this problem, an artifact has been developed which can be calibrated using a commercially available high-accuracy tactile system and then be used to calibrate typical production vision-based measurement systems. This allows for error mapping to a higher degree of accuracy than is possible with a glass reference artifact. Details of the designed features and manufacturing process of the hybrid dimensional artifact are given and a comparison of the designed features to the measured features of the manufactured artifact is presented and discussed. Measurement results from vision and touch probe systems are compared and evaluated to determine the capability of the manufactured artifact to serve as a calibration tool for video-probe systems. An uncertainty analysis for calibration of the artifact using a CMM is presented.

  3. Cavitation instability in bulk metallic glasses

    Directory of Open Access Journals (Sweden)

    Dai L.H.

    2015-01-01

    Full Text Available Recent experiments have shown that fracture surfaces of bulk metallic glasses (BMGs usually exhibit an intriguing nanoscale corrugation like fractographic feature mediated by nanoscale void formation. We attribute the onset of this nanoscale corrugation to TTZs (tension transformation zones mediated cavitation. In our recent study, the spall experiments of Zr-based BMG using a single-stage light gas gun were performed. To uncover the mechanisms of the spallation damage nucleation and evolution, the samples were designed to be subjected to dynamic tensile loadings of identical amplitude but with different durations by making use of the multi-stress pulse and the double-flyer techniques. It is clearly revealed that the macroscopic spall fracture in BMGs originates from the nucleation, growth and coalescence of micro-voids. Then, a microvoid nucleation model of BMGs based on free volume theory is proposed, which indicates that the nucleation of microvoids at the early stage of spallation in BMGs is resulted from diffusion and coalescence of free volume. Furthermore, a theoretical model of void growth in BMGs undergoing remote dynamic hydrostatic tension is developed. The critical condition of cavitation instability is obtained. It is found that dynamic void growth in BMGs can be well controlled by a dimensionless inertial number characterizing the competition between intrinsic and extrinsic time scales. To unveil the atomic-level mechanism of cavitation, a systematic molecular dynamics (MD simulation of spallation behaviour of a binary metallic glass with different impact velocities was performed. It is found that micro-void nucleation is determined TTZs while the growth is controlled by shear transformation zones (STZs at atomic scale.

  4. Ferromagnetic resonance in bulk nanocrystalline Ni

    Science.gov (United States)

    Prakash Madduri, P. V.; Mathew, S. P.; Kaul, S. N.

    2018-03-01

    A detailed lineshape analysis of the ferromagnetic resonance (FMR) spectra taken on pulse electrodeposited nanocrystalline (nc-) Ni sheets (with the average crystallite size, d, varying from 10 nm to 40 nm) at temperatures ranging from 113 K to 325 K yield accurate values for saturation magnetization, Ms (T), Landé splitting factor, g, anisotropy field, Hk (T) , resonance field, Hres , and FMR linewidth, ΔHpp (T) . Thermally-excited spin-wave (SW) excitations completely account for Ms (T) and the SW description of Ms (T) gives the values for the saturation magnetization and spin-wave stiffness at absolute zero of temperature, i.e., Ms (0) and D0 , for nc-Ni samples of different d that are in excellent agreement with the corresponding values deduced previously from an elaborate SW analysis of the bulk magnetization data. While Ms (0) varies with d as Ms (0) d - 3 / 2,D0 follows the power law D0 ∼d 4 / 3 . The angular variations of Hres in the 'in-plane' as well as 'out-of-plane' sample configurations, demonstrate that the main contribution to Hk (T) comes from the cubic magnetocrystalline anisotropy. The exchange-conductivity mechanism describes the observed thermal decline of ΔHpp reasonably well but fails to explain the very large magnitude of ΔHpp at any given temperature. By comparison, the Landau-Lifshitz-Gilbert (LLG) damping gives a much greater contribution to ΔHpp but the LLG contribution is relatively insensitive to temperature.

  5. 27 CFR 24.301 - Bulk still wine record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bulk still wine record. 24..., DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.301 Bulk still wine record. A proprietor who produces or receives still wine in bond, (including wine intended for use as distilling material or vinegar...

  6. Quantifying Dustiness, Specific Allergens, and Endotoxin in Bulk Soya Imports

    Directory of Open Access Journals (Sweden)

    Howard J. Mason

    2017-11-01

    Full Text Available Soya is an important bulk agricultural product often transported by sea as chipped beans and/or the bean husks after pelletisation. There are proven allergens in both forms. Bulk handling of soya imports can generate air pollution containing dust, allergens, and pyrogens, posing health risks to dockside workers and surrounding populations. Using an International Organization for Standardization (ISO standardised rotating drum dustiness test in seven imported soya bulks, we compared the generated levels of dust and two major soya allergens in three particle sizes related to respiratory health. Extractable levels of allergen and endotoxin from the bulks showed 30–60 fold differences, with levels of one allergen (hydrophobic seed protein and endotoxin higher in husk. The generated levels of dust and allergens in the three particle sizes also showed very wide variations between bulks, with aerolysed levels of allergen influenced by both the inherent dustiness and the extractable allergen in each bulk. Percentage allergen aerolysed from pelletized husk—often assumed to be of low dustiness—after transportation was not lower than that from chipped beans. Thus, not all soya bulks pose the same inhalation health risk and reinforces the importance of controlling dust generation from handling all soya bulk to as low as reasonably practicable.

  7. Role of bulking agents in bladder exstrophyepispadias complexes ...

    African Journals Online (AJOL)

    Three out of five girls had improved bladder prolapse. There was no Complication, infection or migration of bulking agents. Patients had increased in soft tissue according to MRI. Conclusion: Using bulking agents is a good alternative to sling pelvic floor not only cosmetically but also for ease of patients and operation.

  8. Cylindrically symmetric cosmological model in the presence of bulk ...

    Indian Academy of Sciences (India)

    Cylindrically symmetric non-static space–time is investigated in the presence of bulk stress given by Landau and Lifshitz. To get a solution, a supplementary condition between metric potentials is used. The viscosity coefficient of the bulk viscous fluid is assumed to be a power function of mass density whereas the coefficient ...

  9. 7 CFR 58.211 - Packaging room for bulk products.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging room for bulk products. 58.211 Section 58... Service 1 Rooms and Compartments § 58.211 Packaging room for bulk products. A separate room or area shall... dust within the packaging room and where needed, a dust collector shall be provided and properly...

  10. Anisotropic cosmological models with bulk viscosity and particle ...

    Indian Academy of Sciences (India)

    Cosmological model with power-law expansion has a Big-Bang singularity at time t = 0 , whereas the model with exponential expansion has no finite singularity. We study bulk viscosity and particle creation in each model in four different cases. The bulk viscosity coefficient is obtained for full causal, Eckart's and truncated ...

  11. Nucleation of bulk superconductivity close to critical magnetic fields

    DEFF Research Database (Denmark)

    Fournais, Søren; Kachmar, Ayman

    2011-01-01

    threshold value of the applied magnetic field for which bulk superconductivity contributes to the leading order of the energy. Furthermore, the energy of the bulk is related to that of the Abrikosov problem in a periodic lattice. A key ingredient of the proof is a novel L∞ -bound which is of independent...

  12. Bianchi Type-I bulk viscous fluid string dust magnetized ...

    Indian Academy of Sciences (India)

    Bianchi Type-I magnetized bulk viscous fluid string dust cosmological model is investigated. To get a determinate model, we have assumed the conditions and = constant where is the shear, the expansion in the model and the coefficient of bulk viscosity. The behaviour of the model in the presence and ...

  13. Can groundwater be successfully implemented as a bulk water ...

    African Journals Online (AJOL)

    Keywords: groundwater, GRIP, bulk water supply, information variability, borehole productivity, conjunctive use, well-field development cost, well-field yield. Introduction. Historically, groundwater has always been seen as a stand- alone or site-specific resource and never as regional bulk-water supply. Only as recently as ...

  14. 30 CFR 56.6802 - Bulk delivery vehicles.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Maintenance § 56.6802 Bulk delivery vehicles. No welding or cutting shall be performed on a bulk delivery vehicle...

  15. Bianchi Type-I bulk viscous fluid string dust magnetized ...

    Indian Academy of Sciences (India)

    Abstract. Bianchi Type-I magnetized bulk viscous fluid string dust cosmological model is investigated. To get a determinate model, we have assumed the conditions σ ∝ θ and ζθ = constant where σ is the shear, θ the expansion in the model and ζ the coefficient of bulk viscosity. The behaviour of the model in the presence ...

  16. Vortex- and Bragg-glass phases in bulk MgB2

    International Nuclear Information System (INIS)

    Maple, M.B.; Taylor, B.J.; Li, Shi; Frederick, N.A.; Nesterenko, V.F.; Indrakanti, S.S.

    2003-01-01

    A more complete magnetic field-temperature (H-T) phase diagram, containing the upper critical field H c2 (T), the vortex-glass melting line H g (T), and the magnetic irreversibility line H irr (T) has been established for bulk MgB 2 (T c =38.5 K), synthesized under 200 MPa pressure by hot isostatic pressing (HIPing). Scaling analysis of resistivity data, J c data, and electric field vs current density (E-J) isotherms in the mixed-state suggest that a Bragg-glass state exists for H c ) behaviors in high and low magnetic field critical scaling regions

  17. Aspects of Pr3+ luminescence in solids

    International Nuclear Information System (INIS)

    Srivastava, A.M.

    2016-01-01

    A brief perspective on the influence of “host lattice-Pr 3+ ” interactions on the optical properties of the Pr 3+ ion in solids is presented. How the energy position of the Pr 3+ 4f 1 5d 1 configuration relative to the 1 S 0 , 3 P J and host lattice conduction band levels influences the Pr 3+ optical properties is highlighted by considering solids in which the 4f 1 5d 1 configuration (1) is energetically above the 1 S 0 level, (2) is energetically below the 1 S 0 level, (3) is energetically close to the 1 S 0 level, and (4) overlaps with the host lattice conduction band. - Highlights: • Spectroscopic properties of Pr 3+ in solids is examined. • The influence of Pr 3+ 4f 1 5d 1 energy position relative to the 4f 2 levels is discussed. • The effect of interaction between Pr 3+ 4f 1 5d 1 and host conduction level is illustrated. • The paper identifies potential commercial applications.

  18. Bulk forming of industrial micro components in conventional metals and bulk metallic glasses

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Paldan, Nikolas Aulin; Eriksen, Rasmus Solmer

    2007-01-01

    For production of micro components in large numbers, forging is an interesting and challenging process. The conventional metals like silver, steel and aluminum often require multi-step processes, but high productivity and increased strength justify the investment. As an alternative, bulk metallic...... glasses will at elevated temperatures behave like a highly viscous liquid, which can easily form even complicated geometries in 1 step. The strengths and limitations of forming the 2 materials are analyzed for a micro 3D component in a silver alloy and an Mg-Cu-Y BMG. ©2007 American Institute of Physics...

  19. Carbon nanotubes grown on bulk materials and methods for fabrication

    Science.gov (United States)

    Menchhofer, Paul A [Clinton, TN; Montgomery, Frederick C [Oak Ridge, TN; Baker, Frederick S [Oak Ridge, TN

    2011-11-08

    Disclosed are structures formed as bulk support media having carbon nanotubes formed therewith. The bulk support media may comprise fibers or particles and the fibers or particles may be formed from such materials as quartz, carbon, or activated carbon. Metal catalyst species are formed adjacent the surfaces of the bulk support material, and carbon nanotubes are grown adjacent the surfaces of the metal catalyst species. Methods employ metal salt solutions that may comprise iron salts such as iron chloride, aluminum salts such as aluminum chloride, or nickel salts such as nickel chloride. Carbon nanotubes may be separated from the carbon-based bulk support media and the metal catalyst species by using concentrated acids to oxidize the carbon-based bulk support media and the metal catalyst species.

  20. Bulk viscosity of spin-one color superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Sa' d, Basil A.

    2009-08-27

    The bulk viscosity of several quark matter phases is calculated. It is found that the effect of color superconductivity is not trivial, it may suppress, or enhance the bulk viscosity depending on the critical temperature and the temperature at which the bulk viscosity is calculated. Also, is it found that the effect of neutrino-emitting Urca processes cannot be neglected in the consideration of the bulk viscosity of strange quark matter. The results for the bulk viscosity of strange quark matter are used to calculate the r-mode instability window of quark stars with several possible phases. It is shown that each possible phase has a different structure for the r-mode instability window. (orig.)

  1. Fabrication of Miniature Thermoelectric Generators Using Bulk Materials

    Science.gov (United States)

    Joo, Sung-Jae; Ryu, Byungki; Min, Bok-Ki; Lee, Ji-Eun; Kim, Bong-Seo; Park, Su-Dong; Lee, Hee-Woong

    2016-07-01

    Miniature thermoelectric modules (TEMs) are required for micro power generation as well as local cooling, and they should have small size and high performance. However, conventional bulk TEMs generally have in-plane dimensions of a few centimeters, and empty space between the legs for electrical isolation makes efficient miniaturization difficult. In this study, a miniature TEM with footprint of about 0.35 cm2 and leg height of 0.97 mm was fabricated by reducing the dimensions of the legs and attaching them together to form a closely packed assembly, without using microelectromechanical processes. First, Bi0.4Sb1.6Te3 (BST) and Bi2Te2.7Se0.3 (BTS) ingots were made by ball milling and spark plasma sintering, and the ingots were cut into thin plates. These BST and BTS plates were then attached alternately using polyimide tapes, and the attached plates were sliced vertically to produce thin sheets. This process was repeated once again to make chessboard-like assemblies having 20 p- n pairs in an area of 0.35 cm2, and electrical contacts were formed by Ni sputtering and Ag paste coating. Finally, thermally conductive silicone pads (~500 μm) were attached on both sides of the assembly using electrically insulating interface thermal tapes (˜180 μm). The maximum output power ( P max) from the miniature module was about 28 μW and 2.0 mW for temperature difference (Δ T) of 5.6°C and 50.5°C, respectively. Reducing the contact resistance was considered to be the key to increase the output power.

  2. High titers of transmissible spongiform encephalopathy infectivity associated with extremely low levels of PrPSc in vivo.

    Science.gov (United States)

    Barron, Rona M; Campbell, Susan L; King, Declan; Bellon, Anne; Chapman, Karen E; Williamson, R Anthony; Manson, Jean C

    2007-12-07

    Diagnosis of transmissible spongiform encephalopathy (TSE) disease in humans and ruminants relies on the detection in post-mortem brain tissue of the protease-resistant form of the host glycoprotein PrP. The presence of this abnormal isoform (PrP(Sc)) in tissues is taken as indicative of the presence of TSE infectivity. Here we demonstrate conclusively that high titers of TSE infectivity can be present in brain tissue of animals that show clinical and vacuolar signs of TSE disease but contain low or undetectable levels of PrP(Sc). This work questions the correlation between PrP(Sc) level and the titer of infectivity and shows that tissues containing little or no proteinase K-resistant PrP can be infectious and harbor high titers of TSE infectivity. Reliance on protease-resistant PrP(Sc) as a sole measure of infectivity may therefore in some instances significantly underestimate biological properties of diagnostic samples, thereby undermining efforts to contain and eradicate TSEs.

  3. Physical properties and microstructures of La_{1-{x}}Pr_{{x}}PO_4 monazite-ceramics

    Science.gov (United States)

    Thust, Anja; Hirsch, Antje; Haussühl, Eiken; Schrodt, Nadine; Loison, Lise; Schott, Petra; Peters, Lars; Roth, Georg; Winkler, Björn

    2018-04-01

    Synthetic La_{1-{x}}Pr_{{x}}PO_4 monazite-type powders and ceramics with 0 ≤ x ≤ 1 were analysed by scanning electron microscopy, high-temperature powder X-ray diffraction, dilatometry, and plane wave ultrasound spectroscopy. Ceramics were synthesised in a two-step sintering process at 1273 and 1573 K. Final densities were up to 99.3% of the theoretical densities. Each sample shows a homogeneous distribution of grain sizes, which increase with increasing sintering temperature. Grain sizes also depend on composition, with intermediate compositions yielding the largest grains. In-situ high-temperature powder X-ray diffraction shows that the volumetric thermal expansion coefficients of the monazite powders decrease with increasing Pr content. This behavior is not observed in dilatometry measurements of the bulk samples (ceramics) because their thermal expansion mainly depends on their density. Elastic properties show the same dependence on the density.

  4. Fragility of superheated melts and glass-forming ability in Pr-based alloys

    International Nuclear Information System (INIS)

    Meng, Q.G.; Zhou, J.K.; Zheng, H.X.; Li, J.G.

    2006-01-01

    The kinetic viscosity (η) of superheated melts, thermal properties (T x , T m , T L ) and X-ray diffraction analysis on the Pr-based bulk metallic glasses (BMG) are reported and discussed. A new refined concept, the superheated fragility defined as M' = E S δ x /k B , has been developed based on common solidification theory and the Arrhenius equation. The interrelationship between this kind of fragility and the glass-forming ability (GFA) is elaborated on and evaluated in Pr-based BMG and Al-based amorphous ribbon alloys. Using viscosity data of superheated melts, it is shown, theoretically and experimentally, that the fragility parameter M' may be used as a GFA indicator for metallic alloys

  5. Studies in the Crystalline Electric Field in Pr2 Al and Pr Al by the Inelastic Neutron Scattering Method

    International Nuclear Information System (INIS)

    Slisenko, V.I.; Ivanitskij, P.G.; Vasil'kevich, A.A.; Krotenko, V.T.; Majstrenko, A.N.

    1993-01-01

    Results of inelastic neutron scattering in polycrystalline Pr 2 Al and Pr Al are reported. The parameters of the crystal field Hamiltonian for the orthorhombic point symmetry of the Pr 3+ ions in Pr 2 Al and Pr Al are derived from neutron spectra. Using These parameters the magnetic contribution to the specific heat is calculated

  6. GSD-1G and MPI-DING Reference Glasses for In Situ and Bulk Isotopic Determination

    Science.gov (United States)

    Jochum, K.P.; Wilson, S.A.; Abouchami, W.; Amini, M.; Chmeleff, J.; Eisenhauer, A.; Hegner, E.; Iaccheri, L.M.; Kieffer, B.; Krause, J.; McDonough, W.F.; Mertz-Kraus, R.; Raczek, I.; Rudnick, R.L.; Scholz, Donna K.; Steinhoefel, G.; Stoll, B.; Stracke, A.; Tonarini, S.; Weis, D.; Weis, U.; Woodhead, J.D.

    2011-01-01

    This paper contains the results of an extensive isotopic study of United States Geological Survey GSD-1G and MPI-DING reference glasses. Thirteen different laboratories were involved using high-precision bulk (TIMS, MC-ICP-MS) and microanalytical (LA-MC-ICP-MS, LA-ICP-MS) techniques. Detailed studies were performed to demonstrate the large-scale and small-scale homogeneity of the reference glasses. Together with previously published isotopic data from ten other laboratories, preliminary reference and information values as well as their uncertainties at the 95% confidence level were determined for H, O, Li, B, Si, Ca, Sr, Nd, Hf, Pb, Th and U isotopes using the recommendations of the International Association of Geoanalysts for certification of reference materials. Our results indicate that GSD-1G and the MPI-DING glasses are suitable reference materials for microanalytical and bulk analytical purposes. Ce document contient les r??sultats d'une importante ??tude isotopique des verres de r??f??rence USGS GSD-1G et MPI-DING. Treize laboratoires diff??rents ont particip?? au travers de techniques analytiques de haute pr??cision travaillant soit sur ??chantillon total (TIMS, MC-ICP-MS) soit par microanalyse ??in situ?? (LA-MC-ICP-MS, LA-ICP-MS). ?? 2010 The Authors. Geostandards and Geoanalytical Research ?? 2010 International Association of Geoanalysts.

  7. Crystal structure of PrOHSO4

    International Nuclear Information System (INIS)

    Fahey, J.A.; Williams, G.J.B.; Haschke, J.M.

    1979-01-01

    PrOHSO 4 was prepared by hydrothermal reaction of Pr(OH) 3 with Pr 2 (SO 4 ) 3 x H 2 O at 450 to 500 0 C and 1,200 +- 200 atm water pressure. The space group is P2 1 /c; the cell parameters are a = 4.488, b = 12.495, c = 7.091 A, β = 111.08, Z = 4, d/sub x/ = 4.49 g/cm 3 . Atomic coordinates and anisotropic thermal parameters are tabulated. A stereoscopic protection of the cation coordination sphere is shown and discussed. 2 figures, 3 tables

  8. Preliminary results of human PrPC protein studied by spectroscopic techniques

    Science.gov (United States)

    Nowakowski, Michał; Czapla-Masztafiak, Joanna; Kozak, Maciej; Zhukov, Igor; Zhukova, Lilia; Szlachetko, Jakub; Kwiatek, Wojciech M.

    2017-11-01

    Neurodegenerative diseases are one of the malfunctions of human nervous system, being a class of complex and prominent pathologies. The human prion Protease Resistant Protein (PrP) is protein regulating copper metabolism in mammalian cells through binding of Cu(II) ions to specific fragments. Nowadays misfolding of this protein is associated with development of prion diseases. Therefore, it is crucial to obtain structural information about coordination of Cu(II) by PrP protein. Herein, we report X-ray absorption spectroscopy (XAS) measurements, carried out on SuperXAS beamline (SLS, PSI Villigen) on PrPC-Cu(II) complexes. Obtained results were compared with theoretical predictions done by FEFF 9.6 software. Complementary to XAS data, Atomic Force Microscopy (AFM) measurements were conducted to obtain low resolution structural information about prepared sample that allow to develop protocol of fixing PrPC molecules on solid substrate used for further experiments. It has been established that folded C-terminal domain of PrPC protein has around 5 nm in diameter. Presented results showed that both XAS and AFM methods are useful tools in detailed examination of complexes of human PrPC either with Cu(II) or with other divalent metal ions.

  9. Complex magnetic order in the kagome ferromagnet Pr3Ru4Al12

    Science.gov (United States)

    Henriques, M. S.; Gorbunov, D. I.; Andreev, A. V.; Fabrèges, X.; Gukasov, A.; Uhlarz, M.; Petříček, V.; Ouladdiaf, B.; Wosnitza, J.

    2018-01-01

    In the hexagonal crystal structure of Pr3Ru4Al12 , the Pr atoms form a distorted kagome lattice, and their magnetic moments, are subject to competing exchange and anisotropy interactions. We performed magnetization, magnetic-susceptibility, specific-heat, electrical-resistivity, and neutron-scattering measurements. Pr3Ru4Al12 is a uniaxial ferromagnet with TC=39 K that displays a collinear magnetic structure (in the high-temperature range of the magnetically ordered state) for which the only crystallographic position of Pr is split into two sites carrying different magnetic moments. A spin-reorientation phase transition is found at 7 K. Below this temperature, part of the Pr moments rotate towards the basal plane, resulting in a noncollinear magnetic state with a lower magnetic symmetry. We argue that unequal RKKY exchange interactions competing with the crystal electric field lead to a moment instability and qualitatively explain the observed magnetic phases in Pr3Ru4Al12 .

  10. Application of the penetration theory for gas - Liquid mass transfer without liquid bulk : Differences with system with a bulk

    NARCIS (Netherlands)

    van Elk, E. P.; Knaap, M. C.; Versteeg, G. F.

    2007-01-01

    Frequently applied micro models for gas-liquid mass transfer all assume the presence of a liquid bulk. However, some systems are characterized by the absence of a liquid bulk, a very thin layer of liquid flows over a solid surface. An example of such a process is absorption in a column equipped with

  11. A new layered iron arsenide superconductor: (Ca,Pr)FeAs2.

    Science.gov (United States)

    Yakita, Hiroyuki; Ogino, Hiraku; Okada, Tomoyuki; Yamamoto, Akiyasu; Kishio, Kohji; Tohei, Tetsuya; Ikuhara, Yuichi; Gotoh, Yoshito; Fujihisa, Hiroshi; Kataoka, Kunimitsu; Eisaki, Hiroshi; Shimoyama, Jun-ichi

    2014-01-22

    A new iron-based superconductor, (Ca,Pr)FeAs2, was discovered. Plate-like crystals of the new phase were obtained, and its crystal structure was investigated by single-crystal X-ray diffraction analysis. The structure was identified as the monoclinic system with space group P2₁/m, composed of two Ca(Pr) planes, Fe2As2 layers, and As2 zigzag chain layers. Plate-like crystals of the new phase showed superconductivity, with a T(c) of ~20 K in both magnetization and resistivity measurements.

  12. Stability of bulk metallic glass structure

    Energy Technology Data Exchange (ETDEWEB)

    Jain, H.; Williams, D.B.

    2003-06-18

    The fundamental origins of the stability of the (Pd-Ni){sub 80}P{sub 20} bulk metallic glasses (BMGs), a prototype for a whole class of BMG formers, were explored. While much of the properties of their BMGs have been characterized, their glass-stability have not been explained in terms of the atomic and electronic structure. The local structure around all three constituent atoms was obtained, in a complementary way, using extended X-ray absorption fine structure (EXAFS), to probe the nearest neighbor environment of the metals, and extended energy loss fine structure (EXELFS), to investigate the environment around P. The occupied electronic structure was investigated using X-ray photoelectron spectroscopy (XPS). The (Pd-Ni){sub 80}P{sub 20} BMGs receive their stability from cumulative, and interrelated, effects of both atomic and electronic origin. The stability of the (Pd-Ni){sub 80}P{sub 20} BMGs can be explained in terms of the stability of Pd{sub 60}Ni{sub 20}P{sub 20} and Pd{sub 30}Ni{sub 50}P{sub 20}, glasses at the end of BMG formation. The atomic structure in these alloys is very similar to those of the binary phosphide crystals near x=0 and x=80, which are trigonal prisms of Pd or Ni atoms surrounding P atoms. Such structures are known to exist in dense, randomly-packed systems. The structure of the best glass former in this series, Pd{sub 40}Ni{sub 40}P{sub 20} is further described by a weighted average of those of Pd{sub 30}Ni{sub 50}P{sub 20} and Pd{sub 60}Ni{sub 20}P{sub 20}. Bonding states present only in the ternary alloys were found and point to a further stabilization of the system through a negative heat of mixing between Pd and Ni atoms. The Nagel and Tauc criterion, correlating a decrease in the density of states at the Fermi level with an increase in the glass stability, was consistent with greater stability of the Pd{sub x}Ni{sub (80-x)}P{sub 20} glasses with respect to the binary alloys of P. A valence electron concentration of 1.8 e/a, which

  13. Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties

    KAUST Repository

    Mehdizadeh Dehkordi, Arash

    2015-08-15

    We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO3 ceramics via a combination of solid state reaction and spark plasma sintering techniques. Polycrystalline ceramics possessing a unique morphology can be achieved by optimizing the process parameters, particularly spark plasma sintering heating rate. The phase and morphology of the synthesized ceramics were investigated in detail using X-ray diffraction, scanning electron microcopy and energy-dispersive X-ray spectroscopy It was observed that the grains of these bulk Pr-doped SrTiO3 ceramics were enhanced with Pr-rich grain boundaries. Electronic and thermal transport properties were also investigated as a function of temperature and doping concentration Such a microstructure was found to give rise to improved thermoelectric properties. Specifically, it resulted in a significant improvement in carrier mobility and the thermoelectric power factor. Simultaneously, it also led to a marked reduction in the thermal conductivity. As a result, a significant improvement (> 30%) in the thermoelectric figure of merit was achieved for the whole temperature range over all previously reported maximum values for SrTiO3-based ceramics. This synthesis demonstrates the steps for the preparation of bulk polycrystalline ceramics of non-uniformly Pr-doped SrTiO3.

  14. Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties.

    Science.gov (United States)

    Mehdizadeh Dehkordi, Arash; Bhattacharya, Sriparna; Darroudi, Taghi; Zeng, Xiaoyu; Alshareef, Husam N; Tritt, Terry M

    2015-08-15

    We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO3 ceramics via a combination of solid state reaction and spark plasma sintering techniques. Polycrystalline ceramics possessing a unique morphology can be achieved by optimizing the process parameters, particularly spark plasma sintering heating rate. The phase and morphology of the synthesized ceramics were investigated in detail using X-ray diffraction, scanning electron microcopy and energy-dispersive X-ray spectroscopy. It was observed that the grains of these bulk Pr-doped SrTiO3 ceramics were enhanced with Pr-rich grain boundaries. Electronic and thermal transport properties were also investigated as a function of temperature and doping concentration. Such a microstructure was found to give rise to improved thermoelectric properties. Specifically, it resulted in a significant improvement in carrier mobility and the thermoelectric power factor. Simultaneously, it also led to a marked reduction in the thermal conductivity. As a result, a significant improvement (> 30%) in the thermoelectric figure of merit was achieved for the whole temperature range over all previously reported maximum values for SrTiO3-based ceramics. This synthesis demonstrates the steps for the preparation of bulk polycrystalline ceramics of non-uniformly Pr-doped SrTiO3.

  15. Induced mutations for soybean rust resistance

    International Nuclear Information System (INIS)

    Smutkupt, S.; Wongpiyasatid, A.; Lamseejan, S.

    1983-01-01

    Soybean mutation experiments for inducing rust resistance in the cultivars G 8375, Wakashima mutant number 10, Taichung N, S.J.2, S.J.4, BM 50, BM 98, G 8377, G 8586 and G 8587 have been carried out since 1979. Six pods from each of 4438 control and 43,907 M 1 plants were randomly harvested. M 2 seeds of each cultivar of different doses were bulked (M 2 bulk). In addition, 270 good M 1 plants were selected and threshed singly (M 2 single). M 2 -bulk and M 2 -single seeds were advanced to M 3 . Both, M 3 -bulk and M 3 -single plants, together with the remaining M 2 -bulk seeds were screened for rust resistance in the rainy season of 1980 in Nong Hoi Valley (altitude about 1000 m above sea level) and at Mae Joe Station, both in Chiang Mai Province (latitude 18 deg. 31'-19 deg. N). Based on the IWGSR rating system, soybean plants with slow growth of rust were selected from both locations. The results were as follows: Six plants were selected from a total of 2802 control plants, and 115 from a total of 28,834 M 2 and M 3 plants. Further evaluation of these selections for rust resistance will be carried out in the rainy season of 1981 in Nong Hoi Valley, Chiang Mai. (author)

  16. Temperature dependence of the field-induced magnetic form factor of the intermetallic compound PrSn3

    International Nuclear Information System (INIS)

    Loong, C.; Stassis, C.; Zarestky, J.; McMasters, O.D.; Moon, R.M.

    1984-01-01

    The spatial distribution of the magnetization induced by a magnetic field of 42.5 kG in a single crystal of PrSn 3 has been studied at 100 and 20 K using polarized neutron scattering techniques. We find that at both temperatures the measured form factor is in good agreement with the theoretical 4f magnetic form factor of the Pr 3+ ion. This result is in contrast to the large deviations from the 4f magnetic form factor of Ce 3+ observed, at low temperatures, for the mixed-valence compounds CeSn 3 and CePd 3 . The localized static susceptibility of PrSn 3 at 100 and 20 K, obtained by extrapolating the measured form factor to the forward direction, agrees very well with bulk susceptibility measurements

  17. Macroscopic Properties of Restacked, Redox-Liquid Exfoliated Graphite and Graphite Mimics Produced in Bulk Quantities

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Vikram K [ORNL; Quinlan, Ronald [ORNL; Agapov, Alexander L [ORNL; Dunlap, John R [ORNL; Nelson, Kimberly M [ORNL; Duranty, Edward R [ORNL; Sokolov, Alexei P [ORNL; Bhat, Gajanan [ORNL; Mays, Jimmy [ORNL

    2014-01-01

    The excellent properties exhibited by monolayer graphene have spurred the development of exfoliation techniques using bulk graphite to produce large quantities of pristine monolayer sheets. Development of simple chemistry to exfoliate and intercalate graphite and graphite mimics in large quantities is required for numerous applications. To determine the macroscopic behavior of restacked, exfoliated bulk materials, a systematic approach is presented using a simple, redox-liquid sonication process along to obtain large quantities of 2D and 3D hexagonally layered graphite, molybdenum disulfi de, and boron nitride, which are subsequently characterized to observe chemical and structural changes. For MoS 2 sonicated with the antioxidant sodium bisulfi te, results from Raman spectroscopy, X-ray diffraction, and electron microscopy indicate the presence of distorted phases from different polymorphs, and apparent nanotube structures in the bulk, restacked powder. Furthermore, using thermograviemtric analysis, the antioxidant enhances the resistance to oxidative degradation of MoS 2 , upon thermal treatment up to 900 C. The addition of the ionic antioxidant decreased dispersion stability in non-polar solvent, suggesting decreased compatibility with non-polar systems. Using simple chemical methods, the ability to generate tailored multidimensional layered materials with unique macroscopic properties is critical for numerous applications, including electrical devices, reinforced polymer composites, lithium ion capacitors, and chemical sensing.

  18. Critical current characteristics and history dependence in superconducting SmFeAsOF bulk

    International Nuclear Information System (INIS)

    Ni, B; Ge, J; Kiuchi, M; Otabe, E S; Gao, Z; Wang, L; Qi, Y; Zhang, X; Ma, Y

    2010-01-01

    The superconducting SmFeAsO 1-x F x (x=0.2) polycrystalline bulks were prepared by the powder-in-tube (PIT) method. The magnetic field and temperature dependences of critical current densities in the samples were investigated by resistive and ac inductive (Campbell's) methods. It was found that a fairly large shielding current density over 10 9 A/m 2 , which is considered to correspond to the local critical current density, flows locally with the perimeter size similar to the average grain size of the bulk samples, while an extremely low transport current density of about 10 5 A/m 2 corresponding to the global critical current density flows through the whole sample. Furthermore, a unique history dependence of global critical current density was observed, i.e., it shows a smaller value in the increasing-field process than that in the decreasing-field process. The history dependence of global critical current characteristic in our case can be ascribed to the existence of the weak-link property between the grains in SmFeAsO 1-x F x bulk.

  19. Interplay between surface and bulk states in the Topological Kondo Insulator SmB6

    Science.gov (United States)

    Biswas, Sangram; Hatnean, Monica Ciomaga; Balakrishnan, Geetha; Bid, Aveek

    Kondo insulator SmB6 is predicted to have topologically protected conducting surface states(TSS). We have studied electrical transport through surface states(SS) at ultra-low temperatures in single crystals of SmB6 using local-nonlocal transport scheme and found a large nonlocal signal at temperatures lower than bulk Kondo gap scale. Using resistance fluctuation spectroscopy, we probed the local and nonlocal transport channels and showed that at low temperatures, transport in this system takes place only through SS. The measured noise in this temperature range arises due to Universal Conductance Fluctuations whose statistics was found to be consistent with theoretical predictions for that of 2D systems in the Symplectic symmetry class. We studied the temperature dependence of noise and found that, unlike the topological insulators of the dichalcogenide family, the noise in surface and bulk conduction channels in SmB6 are uncorrelated - at sufficiently low temperatures, the bulk has no discernible contribution to electrical transport in SmB6 making it an ideal platform for probing the physics of TSS. Nanomission, Department of Science & Technology (DST) and Indian Institute of Scienc and EPSRC, UK, Grant EP/L014963/1.

  20. The Pr and Ca Substitution in GdBa2Cu3O7- & delta

    Directory of Open Access Journals (Sweden)

    H. S. H.

    2001-12-01

    Full Text Available   The granular Gd1-x-zPrxCazBa2Cu3O7-δ high-temperature cuprate samples with 0.0 ≤ x ≤ 0.3 and 0.0≤ x ≤ 0.35 are prepared by standard solid state reaction and characterized by XRD and SEM techniques. The BaCuO2 and impurity phases are less than 1% in the samples having high levels of pr and Ca concentrations. The electrical resistivity measurements show a nonlinear reduction in Tc(x,z=etc versus x. Moreover, the Tc(z curve with x=0 is nonlinear and aplateau appears at z≈ 0.05-0.015. For Pr-Ca-doped samples with a constant concentration of Pr, Tc increases with the increase of Ca up to an optimum value of Ca doping and then in decreases. Based on these observations, we suggest that hole filling and hole localization the main effects of Pr ion substiution. The magnetic measurements indicate that the value of Hc1 is in the order of 10 mT. The mangetoresistance measurements have been measured and analyzed. The superconducting transition region is broadened by the application of magnetic field. The experimental data near the onsen of superconductivity are fitted with the Ambegakor and Halperin (AH phase-slip model. We observe that the AH parameter,γ (H, depends not only on the temperature and the magnetic field, but also on the Pr and Ca ions concentrations. It is observed that the critical current density increases with Ca substitution and decreases with Pr substitution in Gd-123 system. We suggest that the Pr ion substitution probably enhances the weak link, but the Ca ion acts as flux pinning center in the GdPrCa-123 system.

  1. Crystal Field Levels of Pr3+ in PrFeO3 and PrGaO3 Determined by Inelastic Neutron Scattering

    DEFF Research Database (Denmark)

    Feldmann, K.; Henning, K.; Kaun, L.

    1975-01-01

    The crystal field splitting of the 3H4 ground state of the Pr ion in PrFeO3 and PrGaO3 has been investigated by inelastic scattering of thermal neutrons. At several temperatures the transitions have been measured by TAS and TOF methods for polycrystalline PrFeO3 and by the TOF method...... for polycrystalline PrGaO3. Energy level schemes which are different for these materials are given....

  2. Improving Performance in Dense Wireless Spaces by Controlling Bulk Traffic

    Directory of Open Access Journals (Sweden)

    Marat Zhanikeev

    2017-01-01

    Full Text Available The growing number of wireless devices nowadays often results in congestion of wireless channels. In research, this topic is referred to as networking in dense wireless spaces. The literature on the topic shows that the biggest problem is the high number of concurrent sessions to a wireless access point. The obvious solution is to reduce the number of concurrent sessions. This paper proposes a simple method called Bulk-n-Pick which minimizes the number of prolonged concurrent sessions by separating bulk from sync traffic. Aiming at educational applications, under the proposed design, web applications would distribute the main bulk of content once at the beginning of a class and then rely on small messages for real time sync traffic during the class. For realistic performance analysis, this paper first performs real-life experiments with various counts of wireless devices, bulk sizes, and levels of sync intensity. Based on the experiments, this paper shows that the proposed Bulk-n-Pick method outperforms the traditional design even when only two concurrent bulk sessions are allowed. The experiment shows that up to 10 concurrent bulk sessions are feasible in practice. Based on these results, a method for online performance optimization is proposed and validated in a trace-based emulation.

  3. Bulk-mediated surface transport in the presence of bias

    Science.gov (United States)

    Berezhkovskii, Alexander M.; Dagdug, Leonardo; Bezrukov, Sergey M.

    2017-07-01

    Surface transport, when the particle is allowed to leave the surface, travel in the bulk for some time, and then return to the surface, is referred to as bulk-mediated surface transport. Recently, we proposed a formalism that significantly simplifies analysis of bulk-mediated surface diffusion [A. M. Berezhkovskii, L. Dagdug, and S. M. Bezrukov, J. Chem. Phys. 143, 084103 (2015)]. Here this formalism is extended to bulk-mediated surface transport in the presence of bias, i.e., when the particle has arbitrary drift velocities on the surface and in the bulk. A key advantage of our approach is that the transport problem reduces to that of a two-state problem of the particle transitions between the surface and the bulk. The latter can be solved with relative ease. The formalism is used to find the Laplace transforms of the first two moments of the particle displacement over the surface in time t at arbitrary values of the particle drift velocities and diffusivities on the surface and in the bulk. This allows us to analyze in detail the time dependence of the effective drift velocity of the particle on the surface, which can be highly nontrivial.

  4. Phase diagrams of Pr-C system

    International Nuclear Information System (INIS)

    Eremenko, V.N.; Velikanova, T.Ya.; Gordijchuk, O.V.

    1988-01-01

    Results of the X-ray phase, metallographic and high-temperature differential thermal analysis are used for the first time to plot a diagram of the Pr-C system state. Carbides are formed in the system: Pr 2 C 3 with the bcc-structure of the Pu 2 C 3 type and with the period a 0 = 0.85722+-0.00026 within the phase region + 2 C 3 >, a 0 0.86078+-0.00016 nm - within the region 2 C 3 >+α-PrC 2 ; dimorphous PrC 2 : α-PrC 2 with the bct-structure of the CaC 2 type and periods a 0.38517+-0.00011, c 0 = 0.64337+-0.00019 nm; β-PrC 2 with the fcc-structure, probably, of KCN type. Dicarbide melts congruently at 2320 grad. C, forming eutectics with graphite at 2254+-6 grad. C and composition of 71.5% (at.)C. It is polymorphously transformed in the phase region 2 C 3 > + 2 > at 1145+-4 grad. C, and in the region 2 >+C at 1134+-4 grad. C. Sesquicarbide melts incongruently at 1545+-4 grad. C. The eutectic reaction L ↔ + 2 C 3 > occurs at 800+-4 grad. C, the eutectic composition ∼ 15% (at.)C. The temperature of the eutectoid reaction ↔ + 2 C 3 > is 675+-6 grad C. The limiting carbon solubility in β-Pr is about 8 and in α-Pr it is about 5% (at.)

  5. Brain delivery of AAV9 expressing an anti-PrP monovalent antibody delays prion disease in mice.

    Science.gov (United States)

    Moda, Fabio; Vimercati, Chiara; Campagnani, Ilaria; Ruggerone, Margherita; Giaccone, Giorgio; Morbin, Michela; Zentilin, Lorena; Giacca, Mauro; Zucca, Ileana; Legname, Giuseppe; Tagliavini, Fabrizio

    2012-01-01

    Prion diseases are caused by a conformational modification of the cellular prion protein (PrP (C)) into disease-specific forms, termed PrP (Sc), that have the ability to interact with PrP (C) promoting its conversion to PrP (Sc). In vitro studies demonstrated that anti-PrP antibodies inhibit this process. In particular, the single chain variable fragment D18 antibody (scFvD18) showed high efficiency in curing chronically prion-infected cells. This molecule binds the PrP (C) region involved in the interaction with PrP (Sc) thus halting further prion formation. These findings prompted us to test the efficiency of scFvD18 in vivo. A recombinant Adeno-Associated Viral vector serotype 9 was used to deliver scFvD18 to the brain of mice that were subsequently infected by intraperitoneal route with the mouse-adapted scrapie strain RML. We found that the treatment was safe, prolonged the incubation time of scrapie-infected animals and decreased the burden of total proteinase-resistant PrP (Sc) in the brain, suggesting that scFvD18 interferes with prion replication in vivo. This approach is relevant for designing new therapeutic strategies for prion diseases and other disorders characterized by protein misfolding.

  6. Accumulation profiles of PrPSc in hemal nodes of naturally and experimentally scrapie-infected sheep

    Science.gov (United States)

    2013-01-01

    Background In classical scrapie, the disease-associated abnormal isoform (PrPSc) of normal prion protein accumulates principally in the nervous system and lymphoid tissues of small ruminants. Lymph nodes traffic leukocytes via lymphatic and blood vasculatures but hemal nodes lack lymphatic vessels and thus traffic leukocytes only via the blood. Although PrPSc accumulation profiles are well-characterized in ovine lymphoid tissues, there is limited information on such profiles in hemal nodes. Therefore, the objective of this study was to compare the follicular accumulation of PrPSc within hemal nodes and lymph nodes by prion epitope mapping and western blot studies. Results Our studies found that PrPSc accumulation in 82% of animals’ abdominal hemal nodes when PrPSc is detected in both mesenteric and retropharyngeal lymph nodes collected from preclinical and clinical, naturally and experimentally (blood transfusion) scrapie-infected sheep representing all three major scrapie-susceptible Prnp genotypes. Abdominal hemal nodes and retropharyngeal lymph nodes were then used to analyze immune cell phenotypes and PrPSc epitope mapping by immunohistochemistry and PrPSc banding patterns by western blot. Similar patterns of PrPSc accumulation were detected within the secondary follicles of hemal nodes and retropharyngeal lymph nodes, where cellular labeling was mostly associated with macrophages and follicular dendritic cells. The pattern of PrPSc accumulation within hemal nodes and retropharyngeal lymph nodes also did not differ with respect to epitope mapping with seven mAbs (N-terminus, n = 4; globular domain, n = 2; C-terminus, n = 1) in all three Prnp genotypes. Western blot analysis of hemal node and retropharyngeal lymph node homogenates revealed identical three banding patterns of proteinase K resistant PrPSc. Conclusion Despite the anatomical difference in leukocyte trafficking between lymph nodes and hemal nodes, the follicles of hemal nodes appear to

  7. Revisiting progesterone receptor (PR) actions in breast cancer: Insights into PR repressive functions.

    Science.gov (United States)

    Proietti, Cecilia J; Cenciarini, Mauro E; Elizalde, Patricia V

    2018-05-01

    Progesterone receptor (PR) is a master regulator in female reproductive tissues that controls developmental processes and proliferation and differentiation during the reproductive cycle and pregnancy. PR also plays a role in progression of endocrine-dependent breast cancer. As a member of the nuclear receptor family of ligand-dependent transcription factors, the main action of PR is to regulate networks of target gene expression in response to binding its cognate steroid hormone, progesterone. Liganded-PR transcriptional activation has been thoroughly studied and associated mechanisms have been described while progesterone-mediated repression has remained less explored. The present work summarizes recent advances in the understanding of how PR-mediated repression is accomplished in breast cancer cells and highlights the significance of fully understanding the determinants of context-dependent PR action. Copyright © 2018 Elsevier Inc. All rights reserved.

  8. Mechanism of Drug Resistance Revealed by the Crystal Structure of the Unliganded HIV-1 Protease with F53L Mutation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Fengling; Kovalevsky, Andrey Y.; Louis, John M.; Boross, Peter I.; Wang, Yuan-Fang; Harrison, Robert W.; Weber, Irene T. (GSU); (NIH)

    2010-12-03

    Mutations in HIV-1 protease (PR) that produce resistance to antiviral PR inhibitors are a major problem in AIDS therapy. The mutation F53L arising from antiretroviral therapy was introduced into the flexible flap region of the wild-type PR to study its effect and potential role in developing drug resistance. Compared to wild-type PR, PR{sub F53L} showed lower (15%) catalytic efficiency, 20-fold weaker inhibition by the clinical drug indinavir, and reduced dimer stability, while the inhibition constants of two peptide analog inhibitors were slightly lower than those for PR. The crystal structure of PR{sub F53L} was determined in the unliganded form at 1.35 {angstrom} resolution in space group P4{sub 1}2{sub 1}2. The tips of the flaps in PR{sub F53L} had a wider separation than in unliganded wild-type PR, probably due to the absence of hydrophobic interactions of the side-chains of Phe53 and Ile50{prime}. The changes in interactions between the flaps agreed with the reduced stability of PR{sub F53L} relative to wild-type PR. The altered flap interactions in the unliganded form of PR{sub F53L} suggest a distinct mechanism for drug resistance, which has not been observed in other common drug-resistant mutants.

  9. Significant enhancement in thermoelectric properties of polycrystalline Pr-doped SrTiO3−δ ceramics originating from nonuniform distribution of Pr dopants

    KAUST Repository

    Dehkordi, Arash Mehdizadeh

    2014-05-12

    Recently, we have reported a significant enhancement ( >70% at 500 °C) in the thermoelectric power factor (PF) of bulk polycrystalline Pr-doped SrTiO3 ceramics employing a novel synthesis strategy which led to the highest ever reported values of PF among doped polycrystalline SrTiO3. It was found that the formation of Pr-rich grain boundary regions gives rise to an enhancement in carrier mobility. In this Letter, we investigate the electronic and thermal transport in Sr1− x Pr x TiO3 ceramics in order to determine the optimum doping concentration and to evaluate the overall thermoelectric performance. Simultaneous enhancement in the thermoelectric power factor and reduction in thermal conductivity in these samples resulted in more than 30% improvement in the dimensionless thermoelectric figure of merit (ZT) for the whole temperature range over all previously reported maximum values. Maximum ZT value of 0.35 was obtained at 500 °C.

  10. Investigation on the structural, magnetic and magnetocaloric properties of nanocrystalline Pr-deficient Pr1-xSrxMnO3-δ manganites

    Science.gov (United States)

    Arun, B.; Athira, M.; Akshay, V. R.; Sudakshina, B.; Mutta, Geeta R.; Vasundhara, M.

    2018-02-01

    We have investigated the structural, magnetic and magnetocaloric properties of nanocrystalline Pr-deficient Pr1-xSrxMnO3-δ Perovskite manganites. Rietveld refinement of the X-ray powder diffraction patterns confirms that all the studied compounds have crystallized into an orthorhombic structure with Pbnm space group. Transmission electron microscopy analysis reveals nanocrystalline compounds with crystallite size less than 50 nm. The selected area electron diffraction patterns reveal the highly crystalline nature of the compounds and energy dispersive X-ray spectroscopic analysis shows that the obtained compositions are nearly identical with the nominal one. The oxygen stoichiometry is estimated by iodometric titration method and stoichiometric compositions are confirmed by X-ray Fluorescence Spectrometry analysis. A large bifurcation is observed in the ZFC/FC curves and Arrott plots not show a linear relation but have a convex curvature nature. The temperature dependence of inverse magnetic susceptibility at higher temperature confirms the existence of ferromagnetic clusters. The experimental results reveal that the reduction of crystallite size to nano metric scale in Pr-deficient manganites adversely influences structural, magnetic and magnetocaloric properties as compared to its bulk counterparts reported earlier.

  11. Preparation of Bulk 13C-Enriched Graphene Materials

    Directory of Open Access Journals (Sweden)

    Leilei Tian

    2010-01-01

    Full Text Available Arc-discharge has been widely used in the bulk production of various carbon nanomaterials, especially for structurally more robust single-walled carbon nanotubes. In this paper, the same bulk-production technique was applied to the synthesis of significantly 13C-enriched graphitic materials, from which graphene oxides similarly enriched with 13C were prepared and characterized. The results demonstrate that arc-discharge is a convenient method to produce bulk quantities of 13C-enriched graphene materials from relatively less expensive precursors (largely amorphous 13C powders.

  12. Engineering Nanostructural Routes for Enhancing Thermoelectric Performance: Bulk to Nanoscale.

    Science.gov (United States)

    Mohanraman, Rajeshkumar; Lan, Tian-Wey; Hsiung, Te-Chih; Amada, Dedi; Lee, Ping-Chung; Ou, Min-Nan; Chen, Yang-Yuan

    2015-01-01

    Thermoelectricity is a very important phenomenon, especially its significance in heat-electricity conversion. If thermoelectric devices can be effectively applied to the recovery of the renewable energies, such as waste heat and solar energy, the energy shortage, and global warming issues may be greatly relieved. This review focusses recent developments on the thermoelectric performance of a low-dimensional material, bulk nanostructured materials, conventional bulk materials etc. Particular emphasis is given on, how the nanostructure in nanostructured composites, confinement effects in one-dimensional nanowires and doping effects in conventional bulk composites plays an important role in ZT enhancement.

  13. Bulk viscosity from hydrodynamic fluctuations with relativistic hydrokinetic theory

    Science.gov (United States)

    Akamatsu, Yukinao; Mazeliauskas, Aleksas; Teaney, Derek

    2018-02-01

    Hydrokinetic theory of thermal fluctuations is applied to a nonconformal relativistic fluid. Solving the hydrokinetic equations for an isotropically expanding background we find that hydrodynamic fluctuations give ultraviolet divergent contributions to the energy-momentum tensor. After shifting the temperature to account for the energy of nonequilibrium modes, the remaining divergences are renormalized into local parameters, e.g., pressure and bulk viscosity. We also confirm that the renormalization of the pressure and bulk viscosity is universal by computing them for a Bjorken expansion. The fluctuation-induced bulk viscosity reflects the nonconformal nature of the equation of state and is modestly enhanced near the QCD deconfinement temperature.

  14. Alternative technology of nanoparticles consolidation in the bulk material

    Directory of Open Access Journals (Sweden)

    VOLKOV Georgiy Michailovich

    2016-02-01

    Full Text Available Theoretical bases and technological principles of single-stages nanoparticles conso-lidation into bulk material were offered. The theory was implemented on the model system of carbon-carbon in the process of high-temperature pyrolysis of hydrocar-bons. The bulk carbon nanomaterial with unique technical properties was produced. That made it possible to create engineering products which technical characteristics are higher than the existing level in the world. The proposed theory can be adapted to other gas-phase, liquid phase and secondary crystallization processes to create bulk nanomaterials of another chemical composition with no less unique properties.

  15. Bulk media assay using backscattered neutron spectrometry

    International Nuclear Information System (INIS)

    Csikai, J.

    2000-01-01

    This paper summarized a systematic study of bulk media assay using backscattered neutron spectrometry. The source-sample-detector geometry used for the measurements of leakage and elastically backscattered (EBS) spectra of neutrons is shown. Neutrons up to about 14 MeV were produced via 2 H (d,n) and 9 Be (d,n) reactions using different deuteron beam energies between 5 and 10 MeV at the MGC-20E cyclotron of ATOMKI (Debrecen). Neutron yields of the Pu-Be and 252 Cf sources were 5.25 x 10 6 n/s and 1.8 x 10 6 n/s, respectively. Flux density distributions of thermal and primary 14 MeV neutrons were measured for graphite, water and coal samples in various moderator (M)-sample (S)-reflector (R) geometries. Relative fractions and integrated yields of 252 Cf, Pu-Be and 14 MeV neutrons above the (n,n'γ) reaction thresholds for 12 C, 16 O and 28 Si isotopes vs sample thickness have also been determined. It was found that the integrated reaction rate vs sample thickness decreasing exponentially with different attenuation coefficients depending on the neutron spectrum and the composition of the sample. The spectra of neutrons from sources passing through slabs of water, graphite, sand, Al, Fe and Pb up to 20 cm in thickness have been measured by a PHRS system in the 1.2 to 1.5 MeV range. The leakage neutron spectra from a Pu-Be source placed in the center of 30 cm diameter sphere filled with water, paraffin oil, SiO 2 , zeolite and river sand were also measured. The measured spectra have been compared with the calculated results obtained by the three dimensional Monte-Carlo code MCNP-4A and point-wise cross sections from the ENDF/B-4, ENDF/B-6, ENDF/E-1, BROND-2 and JENDL-3.1 data files. New results were obtained for validation of different data libraries from a comparison on the measured and the calculated spectra. Some typical results for water, Al, sand and Fe are shown. A combination of the backscattered neutron spectrometry with the surface gauge used both for the

  16. Pr-magnetism in the quasi-skutterudite compound PrFe2Al8

    Science.gov (United States)

    Nair, Harikrishnan S.; Ogunbunmi, Michael O.; Kumar, C. M. N.; Adroja, D. T.; Manuel, P.; Fortes, D.; Taylor, J.; Strydom, A. M.

    2017-08-01

    The intermetallic compound PrFe2Al8 that possesses a three-dimensional network structure of Al polyhedra centered at the transition metal element Fe and the rare earth Pr is investigated through neutron powder diffraction and inelastic neutron scattering in order to elucidate the magnetic ground state of Pr and Fe and the crystal field effects of Pr. Our neutron diffraction study confirms long-range magnetic order of Pr below TN = 4.5 K in this compound. Subsequent magnetic structure estimation reveals a magnetic propagation vector {k} = {(\\frac{1}{2}~0~\\frac{1}{2})} with a magnetic moment value of 2.5~μB /Pr along the orthorhombic c-axis and evidence the lack of ordering in the Fe sublattice. The inelastic neutron scattering study reveals one crystalline electric field excitation near 19 meV at 5 K in PrFe2Al8. The energy-integrated intensity of the 19 meV excitation as a function of \\vert Q\\vert (\\mathringA-1) follows the square of the magnetic form factor of Pr3+ thereby confirming that the inelastic excitation belongs to the Pr sublattice. The second sum rule applied to the dynamic structure factor indicates only 1.6(2) μB evolving at the 19 meV peak compared to the 3.58 μB for free Pr3+ , indicating that the crystal field ground state is magnetic and the missing moment is associated with the resolution limited quasi-elastic line. The magnetic order occurring in Pr in PrFe2Al8 is counter-intuitive to the symmetry-allowed crystal field level scheme, hence, is suggestive of exchange-mediated mechanisms of ordering stemming from the magnetic ground state of the crystal field levels.

  17. Degradation Potential of Bulk Versus Incrementally Applied and Indirect Composites: Color, Microhardness, and Surface Deterioration.

    Science.gov (United States)

    El Gezawi, M; Kaisarly, D; Al-Saleh, H; ArRejaie, A; Al-Harbi, F; Kunzelmann, K H

    This study investigated the color stability and microhardness of five composites exposed to four beverages with different pH values. Composite discs were produced (n=10); Filtek Z250 (3M ESPE) and Filtek P90 (3M ESPE) were applied in two layers (2 mm, 20 seconds), and Tetric N-Ceram Bulk Fill (TetricBF, Ivoclar Vivadent) and SonicFill (Kerr) were applied in bulk (4 mm) and then light cured (40 seconds, Ortholux-LED, 1600 mW/cm 2 ). Indirect composite Sinfony (3M ESPE) was applied in two layers (2 mm) and cured (Visio system, 3M ESPE). The specimens were polished and tested for color stability; ΔE was calculated using spectrophotometer readings. Vickers microhardness (50 g, dwell time=45 seconds) was assessed on the top and bottom surfaces at baseline, 40 days of storage, subsequent repolishing, and 60 days of immersion in distilled water (pH=7.0), Coca-Cola (pH=2.3), orange juice (pH=3.75), or anise (pH=8.5) using scanning electron microscopy (SEM). The materials had similar ΔE values (40 days, p>0.05), but TetricBF had a significantly greater ΔE than P90 or SF (40 days). The ΔE was less for P90 and TetricBF than for Z250, SonicFill, and Sinfony (60 days). Repolishing and further immersion significantly affected the ΔE (pBulk-fill composites differ regarding color-stability and top-to-bottom microhardness changes compared with those of other composites. P90 showed better surface degradation resistance. In conclusion, bulk-fill composites are not promising alternatives to incremental and indirect composites regarding biodegradation.

  18. Mouse Prion Protein (PrP) Segment 100 to 104 Regulates Conversion of PrPC to PrPSc in Prion-Infected Neuroblastoma Cells

    Science.gov (United States)

    Hara, Hideyuki; Okemoto-Nakamura, Yuko; Shinkai-Ouchi, Fumiko; Hanada, Kentaro; Yamakawa, Yoshio

    2012-01-01

    Prion diseases are characterized by the replicative propagation of disease-associated forms of prion protein (PrPSc; PrP refers to prion protein). The propagation is believed to proceed via two steps; the initial binding of the normal form of PrP (PrPC) to PrPSc and the subsequent conversion of PrPC to PrPSc. We have explored the two-step model in prion-infected mouse neuroblastoma (ScN2a) cells by focusing on the mouse PrP (MoPrP) segment 92-GGTHNQWNKPSKPKTN-107, which is within a region previously suggested to be part of the binding interface or shown to differ in its accessibility to anti-PrP antibodies between PrPC and PrPSc. Exchanging the MoPrP segment with the corresponding chicken PrP segment (106-GGSYHNQKPWKPPKTN-121) revealed the necessity of MoPrP residues 99 to 104 for the chimeras to achieve the PrPSc state, while segment 95 to 98 was replaceable with the chicken sequence. An alanine substitution at position 100, 102, 103, or 104 of MoPrP gave rise to nonconvertible mutants that associated with MoPrPSc and interfered with the conversion of endogenous MoPrPC. The interference was not evoked by a chimera (designated MCM2) in which MoPrP segment 95 to 104 was changed to the chicken sequence, though MCM2 associated with MoPrPSc. Incubation of the cells with a synthetic peptide composed of MoPrP residues 93 to 107 or alanine-substituted cognates did not inhibit the conversion, whereas an anti-P8 antibody recognizing the above sequence in PrPC reduced the accumulation of PrPSc after 10 days of incubation of the cells. These results suggest the segment 100 to 104 of MoPrPC plays a key role in conversion after binding to MoPrPSc. PMID:22398286

  19. Photon cascade luminescence from Pr3+ ions in LiPrP4O12 polyphosphate

    International Nuclear Information System (INIS)

    Shalapska, T; Stryganyuk, G; Romanyshyn, Yu; Demchenko, P; Voloshinovskii, A; Trots, D; Gektin, A; Dorenbos, P

    2010-01-01

    The spectral-kinetic properties of luminescence from LiY 1-x Pr x P 4 O 12 (x = 1, 0.1) phosphors are studied in the 10-300 K temperature range upon excitation within the UV-VUV spectral range. The luminescence observed for LiPrP 4 O 12 at low temperatures is attributed to both intra-configurational 4f 2 → 4f 2 and inter-configurational 4f5d → 4f 2 radiative transitions of Pr 3+ . The temperature dependence of emission and the decay kinetics of Pr 3+ luminescence from LiY 1-x Pr x P 4 O 12 (x = 1, 0.1) phosphors are explained by temperature stimulated transitions from the 1 S 0 to the Pr 3+ 4f5d state. At low temperatures, the energy potential barrier between the 1 S 0 and 4f5d states is 0.014 eV for LiPrP 4 O 12 . The spectral overlap of the 1 S 0 and 4f5d states of Pr 3+ in LiY 0.9 Pr 0.1 P 4 O 12 determines the luminescence properties in the entire temperature range studied.

  20. Temperature-dependent electronic decay profiles in CZT: probe of bulk and surface properties

    Science.gov (United States)

    Kessick, Royal; Maupin, Hugh; Tepper, Gary C.; Szeles, Csaba

    2003-01-01

    The electronic performance of CZT-based gamma radiation spectrometers is governed by a synergism of bulk and surface properties. Compensation is used to increase the bulk resistivity of Cd1-xZnxTe (x~0.1), but the same electronic states that are introduced to increase the material resistivity can also trap charge and reduce the carrier lifetime. Electrical and mechanical surface defects introduced during or subsequent to crystal harvesting are also known to interfere with device performance. Using a contactless, pulsed laser microwave cavity perturbation technique, electronic decay profiles were studied in high pressure Bridgman CZT as a function of temperature. The electronic decay profile was found to depend very strongly on temperature and was modeled using a function consisting of two exponential terms with temperature-dependent amplitudes and time constants. The model was used to relate the observed temperature dependent decay kinetics in CZT to specific trap energies. It was found that, at low temperatures, the electronic decay process is dominated by a deep trap with an energy of approximately 0.69 +/- 0.1 eV from the band edge. As the temperature is increased, the charge trapping becomes dominated by a second trap with an energy of approximately 0.60 +/- 0.1 eV from the band edge. Surface damage introduces additional charge traps that significantly alter the decay kinetics particularly at low temperatures.

  1. Focus on CSIR research in water resources: Groundwater resistivity

    CSIR Research Space (South Africa)

    Colvin, C

    2007-08-01

    Full Text Available Resistivity is a non-invasive geophysical method that can be used to provide additional information on the subsurface. This can then lead to cost-effective answers to geological questions. The bulk resistivity of different subsurface units varies...

  2. Corrosion study of Fe-based bulk metallic glasses in chloride medium

    International Nuclear Information System (INIS)

    Waqas, M.U.

    2010-01-01

    Bulk metallic glasses (amorphous metals) are an emerging class of alloys due to their unique set of properties. They exhibit excellent mechanical strength, high hardness and corrosion resistance. Unlike other new materials, which are developed to fulfill a particular need, BMGs came to existence without any application, so the uses of BMGs are yet to be exploited. Before putting BMGs into applications, their properties must be fully understood, particularly the corrosion resistance against a working environment. Fe-based amorphous alloys are particularly important for their future use as structural materials due to their high strength and cheap raw materials. Some Fe-based amorphous alloys exhibit excellent soft magnetic properties, which make them feasible to be used as transformer materials. Some compositions are also competitive to replace the existing bio-materials like 316L SS due to their better biocompatibility. Fe-based amorphous alloys can also be used as thermal-spray coatings due to their unchanged corrosion resistance as compared to bulk alloy. Many electrochemical studies have been done to investigate the corrosion resistance of Fe- based BMG that showed its excellent corrosion resistance. Still not enough data is available and further work is needed to be done in this field. In the present study, corrosion of Fe/sub 50/Cr/sub 14/Mo/sub 14/C/sub 14/B/sub 6/X/sub 2/ (X = Y, Gd, and Dy), designated as S1, S2 and S3 respectively, was investigated in 4M NaCI solution. The corrosion study was done using potentiodynamic polarization test and accelerated corrosion test at a current density of 6mA.cm/sup -2/. Following this; corrosion morphology was investigated by scanning electron microscope, while compositional analysis was done by energy dispersive x-ray spectroscope (EDX) attached with SEM. S1 and S3 showed similar corrosion behavior with S3 having the highest corrosion resistance while S2 have different corrosion behavior as well as least corrosion

  3. Efficiency of bulk-heterojunction organic solar cells

    Science.gov (United States)

    Scharber, M.C.; Sariciftci, N.S.

    2013-01-01

    During the last years the performance of bulk heterojunction solar cells has been improved significantly. For a large-scale application of this technology further improvements are required. This article reviews the basic working principles and the state of the art device design of bulk heterojunction solar cells. The importance of high power conversion efficiencies for the commercial exploitation is outlined and different efficiency models for bulk heterojunction solar cells are discussed. Assuming state of the art materials and device architectures several models predict power conversion efficiencies in the range of 10–15%. A more general approach assuming device operation close to the Shockley–Queisser-limit leads to even higher efficiencies. Bulk heterojunction devices exhibiting only radiative recombination of charge carriers could be as efficient as ideal inorganic photovoltaic devices. PMID:24302787

  4. Bulk metallic glass for low noise fluxgate Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The team of Prime Photonics, Virginia Tech, and Utron Kinetics propose to demonstrate a method for fabrication of a bulk, amorphous, cobalt-rich material that...

  5. Nondestructive Method for Bulk Chemical Characterization of Barred Olivine Chondrules

    Science.gov (United States)

    Montoya-Perez, M. A.; Cervantes-de la Cruz, K. E.; Ruvalcaba-Sil, J. L.

    2017-05-01

    This work develops a bulk chemical characterization of barred olivine chondrules based on the XRF analysis using a portable equipment at the National Research and Conservation Science Laboratory of Cultural Heritage (LANCIC-IF) in Mexico City.

  6. Bulk metallic glass for low noise fluxgate, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The team of Prime Photonics, Virginia Tech, and Utron Kinetics propose to demonstrate a method for fabrication of a bulk, amorphous, cobalt-rich material that...

  7. Role of the antiferromagnetic bulk spins in exchange bias

    Energy Technology Data Exchange (ETDEWEB)

    Schuller, Ivan K. [Center for Advanced Nanoscience and Physics Department, University of California San Diego, La Jolla, CA 92093 (United States); Morales, Rafael, E-mail: rafael.morales@ehu.es [Department of Chemical-Physics & BCMaterials, University of the Basque Country UPV/EHU (Spain); IKERBASQUE, Basque Foundation for Science, 48011 Bilbao (Spain); Batlle, Xavier [Departament Física Fonamental and Institut de Nanociència i Nanotecnologia, Universitat de Barcelona, c/ Martí i Franqués s/n, 08028 Barcelona, Catalonia (Spain); Nowak, Ulrich [Department of Physics, University of Konstanz, 78464 Konstanz (Germany); Güntherodt, Gernot [Physics Institute (IIA), RWTH Aachen University, Campus RWTH-Melaten, 52074 Aachen (Germany)

    2016-10-15

    This “Critical Focused Issue” presents a brief review of experiments and models which describe the origin of exchange bias in epitaxial or textured ferromagnetic/antiferromagnetic bilayers. Evidence is presented which clearly indicates that inner, uncompensated, pinned moments in the bulk of the antiferromagnet (AFM) play a very important role in setting the magnitude of the exchange bias. A critical evaluation of the extensive literature in the field indicates that it is useful to think of this bulk, pinned uncompensated moments as a new type of a ferromagnet which has a low total moment, an ordering temperature given by the AFM Néel temperature, with parallel aligned moments randomly distributed on the regular AFM lattice. - Highlights: • We address the role of bulk antiferromagnetic spins in the exchange bias phenomenon. • Significant experiments on how bulk AFM spins determine exchange bias are highlighted. • We explain the model that accounts for experimental results.

  8. Control over magnetic properties in bulk hybrid materials

    Science.gov (United States)

    Urban, Christian; Quesada, Adrian; Saerbeck, Thomas; Rubia, Miguel Angel De La; Garcia, Miguel Angel; Fernandez, Jose Francisco; Schuller, Ivan K.; UCSD Collaboration; Instituto de Ceramica, Madrid Collaboration; Institut Laue-Langevin, Grenoble Collaboration

    We present control of coercivity and remanent magnetization of a bulk ferromagnetic material embedded in bulk vanadium sesquioxide (V2O3) by using a standard bulk synthesis procedure. The method generalizes the use of structural phase transitions of one material to control structural and magnetic properties of another. A structural phase transition (SPT) in the V2O3 host material causes magnetic properties of Ni to change as function of temperature. The remanent magnetization and the coercivity are reversibly controlled by the SPT without additional external magnetic fields. The reversible tuning shown here opens the pathway for controlling the properties of a vast variety of magnetic hybrid bulk systems. This Work is supported by the Office of Basic Energy Science, U.S. Department of Energy, BES-DMS funded by the Department of Energy's Office of Basic Energy Science, DMR under grant DE FG02 87ER-45332.

  9. Bulk Nano-structured Materials for Turbomachinery Components, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I effort seeks to exploit some of the tremendous benefits that could be attained from a revolutionary new approach to grain refinement in bulk...

  10. A resistência olha a resistência

    Directory of Open Access Journals (Sweden)

    Jorge Ponciano Ribeiro

    Full Text Available Resistência é um processo humano que acontece quando a pessoa se encontra sob algum tipo de ameaça. Não é essencialmente um acontecimento psicoterapêutico. Ocorre na terapia não como uma oposição a si mesmo ou ao terapeuta, mas como uma forma de se ajustar a uma nova situação. A resistência, é por natureza, a atualização do instinto de auto-preservação. E o organismo inteligentemente segue a lei da preferência. Resistência é uma forma de contato que não pode ser destruída, mas administrada, porque ela surge como uma defesa da totalidade vivenciada pela pessoa. A Resistência é, às vezes, resistência e awareness mais que ao contato. Ela revela mais o caminho seguido do que oculta a caminhada feita. A resistência é um processo natural, porque o corpo que não resiste, morre, mas falamos em processos de auto-regulação organísmica. Valorizamos mais o que mantêm a resistência funcionando do que à própria resistência. O terapeuta também resiste, ou seja, ele se auto-regula na sua relação com o cliente. Não questionamos a resistência, mas o processo que a mantêm. Trabalhamos com nove mecanismos de defesa, também tradicionalmente, chamados de resistência.

  11. An insight to the molecular interactions of the FDA approved HIV PR drugs against L38L↑N↑L PR mutant.

    Science.gov (United States)

    Sanusi, Zainab K; Govender, Thavendran; Maguire, Glenn E M; Maseko, Sibusiso B; Lin, Johnson; Kruger, Hendrik G; Honarparvar, Bahareh

    2018-03-01

    The aspartate protease of the human immune deficiency type-1 virus (HIV-1) has become a crucial antiviral target in which many useful antiretroviral inhibitors have been developed. However, it seems the emergence of new HIV-1 PR mutations enhances drug resistance, hence, the available FDA approved drugs show less activity towards the protease. A mutation and insertion designated L38L↑N↑L PR was recently reported from subtype of C-SA HIV-1. An integrated two-layered ONIOM (QM:MM) method was employed in this study to examine the binding affinities of the nine HIV PR inhibitors against this mutant. The computed binding free energies as well as experimental data revealed a reduced inhibitory activity towards the L38L↑N↑L PR in comparison with subtype C-SA HIV-1 PR. This observation suggests that the insertion and mutations significantly affect the binding affinities or characteristics of the HIV PIs and/or parent PR. The same trend for the computational binding free energies was observed for eight of the nine inhibitors with respect to the experimental binding free energies. The outcome of this study shows that ONIOM method can be used as a reliable computational approach to rationalize lead compounds against specific targets. The nature of the intermolecular interactions in terms of the host-guest hydrogen bond interactions is discussed using the atoms in molecules (AIM) analysis. Natural bond orbital analysis was also used to determine the extent of charge transfer between the QM region of the L38L↑N↑L PR enzyme and FDA approved drugs. AIM analysis showed that the interaction between the QM region of the L38L↑N↑L PR and FDA approved drugs are electrostatic dominant, the bond stability computed from the NBO analysis supports the results from the AIM application. Future studies will focus on the improvement of the computational model by considering explicit water molecules in the active pocket. We believe that this approach has the potential to

  12. An insight to the molecular interactions of the FDA approved HIV PR drugs against L38L↑N↑L PR mutant

    Science.gov (United States)

    Sanusi, Zainab K.; Govender, Thavendran; Maguire, Glenn E. M.; Maseko, Sibusiso B.; Lin, Johnson; Kruger, Hendrik G.; Honarparvar, Bahareh

    2018-03-01

    The aspartate protease of the human immune deficiency type-1 virus (HIV-1) has become a crucial antiviral target in which many useful antiretroviral inhibitors have been developed. However, it seems the emergence of new HIV-1 PR mutations enhances drug resistance, hence, the available FDA approved drugs show less activity towards the protease. A mutation and insertion designated L38L↑N↑L PR was recently reported from subtype of C-SA HIV-1. An integrated two-layered ONIOM (QM:MM) method was employed in this study to examine the binding affinities of the nine HIV PR inhibitors against this mutant. The computed binding free energies as well as experimental data revealed a reduced inhibitory activity towards the L38L↑N↑L PR in comparison with subtype C-SA HIV-1 PR. This observation suggests that the insertion and mutations significantly affect the binding affinities or characteristics of the HIV PIs and/or parent PR. The same trend for the computational binding free energies was observed for eight of the nine inhibitors with respect to the experimental binding free energies. The outcome of this study shows that ONIOM method can be used as a reliable computational approach to rationalize lead compounds against specific targets. The nature of the intermolecular interactions in terms of the host-guest hydrogen bond interactions is discussed using the atoms in molecules (AIM) analysis. Natural bond orbital analysis was also used to determine the extent of charge transfer between the QM region of the L38L↑N↑L PR enzyme and FDA approved drugs. AIM analysis showed that the interaction between the QM region of the L38L↑N↑L PR and FDA approved drugs are electrostatic dominant, the bond stability computed from the NBO analysis supports the results from the AIM application. Future studies will focus on the improvement of the computational model by considering explicit water molecules in the active pocket. We believe that this approach has the potential to provide

  13. On a bulk queueing system with impatient customers

    Directory of Open Access Journals (Sweden)

    Tadj Lotfi

    1997-01-01

    Full Text Available We consider a bulk arrival, bulk service queueing system. Customers are served in batches of r units if the queue length is not less than r . Otherwise, the server delays the service until the number of units in the queue reaches or exceeds level r . We assume that unserved customers may get impatient and leave the system. An ergodicity condition and steady-state probabilities are derived. Various system characteristics are also computed.

  14. On a bulk queueing system with impatient customers

    Directory of Open Access Journals (Sweden)

    Lotfi Tadj

    1998-01-01

    Full Text Available We consider a bulk arrival, bulk service queueing system. Customers are served in batches of r units if the queue length is not less than r. Otherwise, the server delays the service until the number of units in the queue reaches or exceeds level r. We assume that unserved customers may get impatient and leave the system. An ergodicity condition and steady-state probabilities are derived. Various system characteristics are also computed.

  15. Financial Reporting of DLA-Owned Bulk Petroleum Products

    Science.gov (United States)

    2001-05-23

    FINANCIAL REPORTING OF DLA-OWNED BULK PETROLEUM PRODUCTS Report No. D-2001-126 May 23, 2001 Office of...34DD MON YYYY") Title and Subtitle Financial Reporting of DLA-Owned Bulk Petroleum Products Contract or Grant Number Program Element Number...the Chief Financial Officers Act of 1990, as amended by the Federal Financial Management Act of 1994. This is the fifth in a series of reports on the

  16. Constructing Social Networks From Secondary Storage With Bulk Analysis Tools

    Science.gov (United States)

    2016-06-01

    displays more than one social network that needs to be separated. The drive owner of Component d9c1 was an administrator for an email server, and would...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS CONSTRUCTING SOCIAL NETWORKS FROM SECONDARY STORAGE WITH BULK ANALYSIS TOOLS by Janina L. Green...AND SUBTITLE CONSTRUCTING SOCIAL NETWORKS FROM SECONDARY STORAGE WITH BULK ANALYSIS TOOLS 5. FUNDING NUMBERS 6. AUTHOR(S) Janina L. Green 7. PERFORMING

  17. Compositional ordering and stability in nanostructured, bulk thermoelectric alloys.

    Energy Technology Data Exchange (ETDEWEB)

    Hekmaty, Michelle A.; Faleev, S.; Medlin, Douglas L.; Leonard, F.; Lensch-Falk, J.; Sharma, Peter Anand; Sugar, J. D.

    2009-09-01

    Thermoelectric materials have many applications in the conversion of thermal energy to electrical power and in solid-state cooling. One route to improving thermoelectric energy conversion efficiency in bulk material is to embed nanoscale inclusions. This report summarize key results from a recently completed LDRD project exploring the science underpinning the formation and stability of nanostructures in bulk thermoelectric and the quantitative relationships between such structures and thermoelectric properties.

  18. Alf Prøysens Teskedsgumma i tantforskningsperspektiv

    Directory of Open Access Journals (Sweden)

    Lassén-Seger, Maria

    2014-06-01

    Full Text Available Alf Prøysen’s Mrs Pepperpot has been adopted by Swedish children’s literature. Still, there is little research done on the stories about her. In this article, I explore the impact of Prøysen’s popular miniature character using topical research on the concept of elderly women or, so called, “aunts”. Mrs Pepperpot’s gender and age, as well as the nature of her shrinking, set her apart from other children’s literature miniatures. This reading, which takes into account how gender and age are made in literary texts, throws new light upon Mrs Pepperpot’s dual nature. The analysis shows how her dramatic adventures whilst a minikin are set off against everyday ”little life”, at the same time as interesting cracks appear in her role as caring wife and good mother via her childish playfulness and rebellious outbursts characterized by non-age adequate behaviour. Thus, Mrs Pepperpot is read as a complex literary character, or a “super aunt”, who encompasses both a female ideal and a resistance towards that ideal.

  19. Dirac Fermions without bulk backscattering in rhombohedral topological insulators

    Science.gov (United States)

    Mera Acosta, Carlos; Lima, Matheus; Seixas, Leandro; da Silva, Antônio; Fazzio, Adalberto

    2015-03-01

    The realization of a spintronic device using topological insulators is not trivial, because there are inherent difficulties in achieving the surface transport regime. The majority of 3D topological insulators materials (3DTI) despite of support helical metallic surface states on an insulating bulk, forming topological Dirac fermions protected by the time-reversal symmetry, exhibit electronic scattering channels due to the presence of residual continuous bulk states near the Dirac-point. From ab initio calculations, we studied the microscopic origin of the continuous bulk states in rhombohedral topological insulators materials with the space group D3d 5 (R 3 m) , showing that it is possible to understand the emergence of residual continuous bulk states near the Dirac-point into a six bands effective model, where the breaking of the R3 symmetry beyond the Γ point has an important role in the hybridization of the px, py and pz atomic orbitals. Within these model, the mechanisms known to eliminate the bulk scattering, for instance: the stacking faults (SF), electric field and alloy, generated the similar effect in the effective states of the 3DTI. Finally, we show how the surface electronic transport is modified by perturbations of bulk with SF. We would like to thank the financial support by Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP).

  20. Materials processing and machine applications of bulk HTS

    Science.gov (United States)

    Miki, M.; Felder, B.; Tsuzuki, K.; Xu, Y.; Deng, Z.; Izumi, M.; Hayakawa, H.; Morita, M.; Teshima, H.

    2010-12-01

    We report a refrigeration system for rotating machines associated with the enhancement of the trapped magnetic flux of bulk high-temperature superconductor (HTS) field poles. A novel cryogenic system was designed and fabricated. It is composed of a low-loss rotary joint connecting the rotor and a closed-cycle thermosiphon under a GM cryocooler using a refrigerant. Condensed neon gas was adopted as a suitable cryogen for the operation of HTS rotating machines with field poles composed of RE-Ba-Cu-O family materials, where RE is a rare-earth metal. Regarding the materials processing of the bulks HTS, thanks to the addition of magnetic particles to GdBa2Cu3O7 - d (Gd123) bulk superconductors an increase of more than 20% in the trapped magnetic flux density was achieved at liquid nitrogen temperature. Field-pole Gd123 bulks up to 46 mm in diameter were synthesized with the addition of Fe-B alloy magnetic particles and assembled into the synchronous machine rotor to be tested. Successful cooling of the magnetized rotor field poles down to 35 K and low-output-power rotating operation was achieved up to 720 rpm in the test machine with eight field-pole bulks. The present results show a substantial basis for making a prototype system of rotating machinery of applied HTS bulks.